V4L/DVB (4228a): pvrusb2 to kernel 2.6.18
Implement V4L2 driver for the Hauppauge PVR USB2 TV tuner.
The Hauppauge PVR USB2 is a USB connected TV tuner with an embedded
cx23416 hardware MPEG2 encoder. There are two major variants of this
device; this driver handles both. Any V4L2 application which
understands MPEG2 video stream data should be able to work with this
device.
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/pvrusb2/pvrusb2-main.c b/drivers/media/video/pvrusb2/pvrusb2-main.c
new file mode 100644
index 0000000..d3c538c
--- /dev/null
+++ b/drivers/media/video/pvrusb2/pvrusb2-main.c
@@ -0,0 +1,180 @@
+/*
+ *
+ * $Id$
+ *
+ * Copyright (C) 2005 Mike Isely <isely@pobox.com>
+ * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/smp_lock.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+
+#include "pvrusb2-hdw.h"
+#include "pvrusb2-context.h"
+#include "pvrusb2-debug.h"
+#include "pvrusb2-v4l2.h"
+#ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
+#include "pvrusb2-sysfs.h"
+#endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
+
+#define DRIVER_AUTHOR "Mike Isely <isely@pobox.com>"
+#define DRIVER_DESC "Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner"
+#define DRIVER_VERSION "V4L in-tree version"
+
+#define DEFAULT_DEBUG_MASK (PVR2_TRACE_ERROR_LEGS| \
+ PVR2_TRACE_INFO| \
+ PVR2_TRACE_TOLERANCE| \
+ PVR2_TRACE_TRAP| \
+ PVR2_TRACE_FIRMWARE| \
+ PVR2_TRACE_EEPROM | \
+ PVR2_TRACE_INIT | \
+ PVR2_TRACE_I2C | \
+ PVR2_TRACE_CHIPS | \
+ PVR2_TRACE_START_STOP | \
+ PVR2_TRACE_CTL | \
+ PVR2_TRACE_DEBUGIFC | \
+ 0)
+
+int pvrusb2_debug = DEFAULT_DEBUG_MASK;
+
+module_param_named(debug,pvrusb2_debug,int,S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug trace mask");
+
+#ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
+static struct pvr2_sysfs_class *class_ptr = 0;
+#endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
+
+static void pvr_setup_attach(struct pvr2_context *pvr)
+{
+ /* Create association with v4l layer */
+ pvr2_v4l2_create(pvr);
+#ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
+ pvr2_sysfs_create(pvr,class_ptr);
+#endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
+}
+
+static int pvr_probe(struct usb_interface *intf,
+ const struct usb_device_id *devid)
+{
+ struct pvr2_context *pvr;
+
+ /* Create underlying hardware interface */
+ pvr = pvr2_context_create(intf,devid,pvr_setup_attach);
+ if (!pvr) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Failed to create hdw handler");
+ return -ENOMEM;
+ }
+
+ pvr2_trace(PVR2_TRACE_INIT,"pvr_probe(pvr=%p)",pvr);
+
+ usb_set_intfdata(intf, pvr);
+
+ return 0;
+}
+
+/*
+ * pvr_disconnect()
+ *
+ */
+static void pvr_disconnect(struct usb_interface *intf)
+{
+ struct pvr2_context *pvr = usb_get_intfdata(intf);
+
+ pvr2_trace(PVR2_TRACE_INIT,"pvr_disconnect(pvr=%p) BEGIN",pvr);
+
+ usb_set_intfdata (intf, NULL);
+ pvr2_context_disconnect(pvr);
+
+ pvr2_trace(PVR2_TRACE_INIT,"pvr_disconnect(pvr=%p) DONE",pvr);
+
+}
+
+static struct usb_driver pvr_driver = {
+ name: "pvrusb2",
+ id_table: pvr2_device_table,
+ probe: pvr_probe,
+ disconnect: pvr_disconnect
+};
+
+/*
+ * pvr_init() / pvr_exit()
+ *
+ * This code is run to initialize/exit the driver.
+ *
+ */
+static int __init pvr_init(void)
+{
+ int ret;
+
+ pvr2_trace(PVR2_TRACE_INIT,"pvr_init");
+
+#ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
+ class_ptr = pvr2_sysfs_class_create();
+#endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
+
+ ret = usb_register(&pvr_driver);
+
+ if (ret == 0)
+ info(DRIVER_DESC " : " DRIVER_VERSION);
+ if (pvrusb2_debug) info("Debug mask is %d (0x%x)",
+ pvrusb2_debug,pvrusb2_debug);
+
+ return ret;
+}
+
+static void __exit pvr_exit(void)
+{
+
+ pvr2_trace(PVR2_TRACE_INIT,"pvr_exit");
+
+#ifdef CONFIG_VIDEO_PVRUSB2_SYSFS
+ pvr2_sysfs_class_destroy(class_ptr);
+#endif /* CONFIG_VIDEO_PVRUSB2_SYSFS */
+
+ usb_deregister(&pvr_driver);
+}
+
+module_init(pvr_init);
+module_exit(pvr_exit);
+
+/* Mike Isely <mcisely@pobox.com> 11-Mar-2006: See pvrusb2-hdw.c for
+ MODULE_DEVICE_TABLE(). We have to declare that attribute there
+ because that's where the device table actually is now and it seems
+ that certain gcc configurations get angry if MODULE_DEVICE_TABLE()
+ is used on what ends up being an external symbol. */
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+
+/*
+ Stuff for Emacs to see, in order to encourage consistent editing style:
+ *** Local Variables: ***
+ *** mode: c ***
+ *** fill-column: 70 ***
+ *** tab-width: 8 ***
+ *** c-basic-offset: 8 ***
+ *** End: ***
+ */