Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits)
Blackfin: fix dma-mapping build errors
Blackfin: hook up new perf_counter_open syscall
Blackfin: drop BF535-specific text for exception 0x2A (unaligned instruction)
Blackfin: fix early crash when booting on wrong cpu
Blackfin: fix GPTMR0_CLOCKSOURCE dependency on BFIN_GPTIMERS
Blackfin: drop unused ISP1760 port1_disable from board resources
Blackfin: bf526-ezbrd: handle different SDRAM chips
Blackfin: fix typo in TRAS define in mem_init.h header
Blackfin: unify memory map headers
Blackfin: stick the CPU name into boot image name
Blackfin: update defconfigs
Blackfin: decouple unrelated cache settings to get exact behavior
Blackfin: update I-pipe patch level
Blackfin: remove obsolete mcount support from I-pipe code
Blackfin: allow CONFIG_TICKSOURCE_GPTMR0 with interrupt pipeline
Blackfin: convert interrupt pipeline to irqflags
Blackfin: allow people to select BF51x-0.1 silicon rev
Blackfin: bf526-ezbrd: set SPI flash resources to SST device
Blackfin: fix accidental reset in some boot modes
Blackfin: abstract irq14 lowering in do_irq
...
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 8ea0d94..7faa2f5 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -274,7 +274,7 @@
config BF_REV_0_1
bool "0.1"
- depends on (BF52x || (BF54x && !BF54xM))
+ depends on (BF51x || BF52x || (BF54x && !BF54xM))
config BF_REV_0_2
bool "0.2"
@@ -358,7 +358,7 @@
config MEM_MT48LC32M16A2TG_75
bool
- depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
+ depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
default y
config MEM_MT48LC32M8A2_75
@@ -366,6 +366,11 @@
depends on (BFIN518F_EZBRD)
default y
+config MEM_MT48H32M16LFCJ_75
+ bool
+ depends on (BFIN526_EZBRD)
+ default y
+
source "arch/blackfin/mach-bf518/Kconfig"
source "arch/blackfin/mach-bf527/Kconfig"
source "arch/blackfin/mach-bf533/Kconfig"
@@ -623,7 +628,6 @@
config TICKSOURCE_GPTMR0
bool "Gptimer0 (SCLK domain)"
select BFIN_GPTIMERS
- depends on !IPIPE
config TICKSOURCE_CORETMR
bool "Core timer (CCLK domain)"
@@ -644,6 +648,7 @@
config GPTMR0_CLOCKSOURCE
bool "Use GPTimer0 as a clocksource (higher rating)"
+ select BFIN_GPTIMERS
depends on GENERIC_CLOCKEVENTS
depends on !TICKSOURCE_GPTMR0
@@ -908,76 +913,97 @@
comment "Cache Support"
+
config BFIN_ICACHE
bool "Enable ICACHE"
+ default y
+config BFIN_ICACHE_LOCK
+ bool "Enable Instruction Cache Locking"
+ depends on BFIN_ICACHE
+ default n
+config BFIN_EXTMEM_ICACHEABLE
+ bool "Enable ICACHE for external memory"
+ depends on BFIN_ICACHE
+ default y
+config BFIN_L2_ICACHEABLE
+ bool "Enable ICACHE for L2 SRAM"
+ depends on BFIN_ICACHE
+ depends on BF54x || BF561
+ default n
+
config BFIN_DCACHE
bool "Enable DCACHE"
+ default y
config BFIN_DCACHE_BANKA
bool "Enable only 16k BankA DCACHE - BankB is SRAM"
depends on BFIN_DCACHE && !BF531
default n
-config BFIN_ICACHE_LOCK
- bool "Enable Instruction Cache Locking"
-
-choice
- prompt "External memory cache policy"
+config BFIN_EXTMEM_DCACHEABLE
+ bool "Enable DCACHE for external memory"
depends on BFIN_DCACHE
- default BFIN_WB if !SMP
- default BFIN_WT if SMP
-config BFIN_WB
- bool "Write back"
- depends on !SMP
- help
- Write Back Policy:
- Cached data will be written back to SDRAM only when needed.
- This can give a nice increase in performance, but beware of
- broken drivers that do not properly invalidate/flush their
- cache.
-
- Write Through Policy:
- Cached data will always be written back to SDRAM when the
- cache is updated. This is a completely safe setting, but
- performance is worse than Write Back.
-
- If you are unsure of the options and you want to be safe,
- then go with Write Through.
-
-config BFIN_WT
- bool "Write through"
- help
- Write Back Policy:
- Cached data will be written back to SDRAM only when needed.
- This can give a nice increase in performance, but beware of
- broken drivers that do not properly invalidate/flush their
- cache.
-
- Write Through Policy:
- Cached data will always be written back to SDRAM when the
- cache is updated. This is a completely safe setting, but
- performance is worse than Write Back.
-
- If you are unsure of the options and you want to be safe,
- then go with Write Through.
-
-endchoice
-
+ default y
choice
- prompt "L2 SRAM cache policy"
- depends on (BF54x || BF561)
- default BFIN_L2_WT
-config BFIN_L2_WB
+ prompt "External memory DCACHE policy"
+ depends on BFIN_EXTMEM_DCACHEABLE
+ default BFIN_EXTMEM_WRITEBACK if !SMP
+ default BFIN_EXTMEM_WRITETHROUGH if SMP
+config BFIN_EXTMEM_WRITEBACK
bool "Write back"
depends on !SMP
+ help
+ Write Back Policy:
+ Cached data will be written back to SDRAM only when needed.
+ This can give a nice increase in performance, but beware of
+ broken drivers that do not properly invalidate/flush their
+ cache.
-config BFIN_L2_WT
+ Write Through Policy:
+ Cached data will always be written back to SDRAM when the
+ cache is updated. This is a completely safe setting, but
+ performance is worse than Write Back.
+
+ If you are unsure of the options and you want to be safe,
+ then go with Write Through.
+
+config BFIN_EXTMEM_WRITETHROUGH
bool "Write through"
- depends on !SMP
+ help
+ Write Back Policy:
+ Cached data will be written back to SDRAM only when needed.
+ This can give a nice increase in performance, but beware of
+ broken drivers that do not properly invalidate/flush their
+ cache.
-config BFIN_L2_NOT_CACHED
- bool "Not cached"
+ Write Through Policy:
+ Cached data will always be written back to SDRAM when the
+ cache is updated. This is a completely safe setting, but
+ performance is worse than Write Back.
+
+ If you are unsure of the options and you want to be safe,
+ then go with Write Through.
endchoice
+config BFIN_L2_DCACHEABLE
+ bool "Enable DCACHE for L2 SRAM"
+ depends on BFIN_DCACHE
+ depends on BF54x || BF561
+ default n
+choice
+ prompt "L2 SRAM DCACHE policy"
+ depends on BFIN_L2_DCACHEABLE
+ default BFIN_L2_WRITEBACK
+config BFIN_L2_WRITEBACK
+ bool "Write back"
+ depends on !SMP
+
+config BFIN_L2_WRITETHROUGH
+ bool "Write through"
+ depends on !SMP
+endchoice
+
+
+comment "Memory Protection Unit"
config MPU
bool "Enable the memory protection unit (EXPERIMENTAL)"
default n
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index 3ab6f23..fd9ccc5 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -13,7 +13,7 @@
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
- -C $(2) -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+ -C $(2) -n '$(MACHINE)-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
-e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
-d $< $@
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index baec133..dcfb488 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -326,11 +326,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -413,11 +419,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -916,7 +922,7 @@
# CONFIG_MMC_SDHCI is not set
CONFIG_SDH_BFIN=m
CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND=y
-CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ=y
+# CONFIG_SDH_BFIN_ENABLE_SDIO_IRQ is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -1147,7 +1153,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig
index c06262e..48a3a7a 100644
--- a/arch/blackfin/configs/BF526-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF526-EZBRD_defconfig
@@ -331,16 +331,18 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-# CONFIG_MPU is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
#
-# Asynchonous Memory Configuration
+# Memory Protection Unit
#
+# CONFIG_MPU is not set
#
# EBIU_AMGCTL Global Control
@@ -418,11 +420,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -1424,7 +1426,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index e9175c6..dd83527 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -331,11 +331,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -418,11 +424,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -1505,7 +1511,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 5aa63ba..4c04480 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -292,12 +292,21 @@
#
# Cache Support
#
+#
+# Cache Support
+#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -391,11 +400,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -1052,7 +1061,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index fed2532..c99bbcd 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -293,11 +293,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -391,11 +397,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -1216,7 +1222,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index f9ac20d..092ffda 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -300,11 +300,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -399,11 +405,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -1269,7 +1275,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index ee98e22..fa698a8 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -311,11 +311,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -398,11 +404,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -1203,7 +1209,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index deeabef..b3d3cab 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -366,14 +366,19 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_WB is not set
-CONFIG_BFIN_L2_WT=y
-# CONFIG_BFIN_L2_NOT_CACHED is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -459,11 +464,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -1606,7 +1611,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index dcfbe2e..0313cd1 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -331,14 +331,19 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-# CONFIG_BFIN_L2_WB is not set
-CONFIG_BFIN_L2_WT=y
-# CONFIG_BFIN_L2_NOT_CACHED is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -425,11 +430,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -1044,7 +1049,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 174c578..5d944ff 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -285,11 +285,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index e17875e..648a31d 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -329,11 +329,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -417,11 +423,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -1246,7 +1252,7 @@
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index fafd95e..ae665b9 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -262,12 +262,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -353,10 +358,10 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -873,7 +878,7 @@
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index e73aa5a..d74b6f4 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -297,11 +297,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -383,11 +389,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -861,7 +867,7 @@
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 8021130..7fc8dfa 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -270,12 +270,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -361,10 +366,10 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -901,7 +906,7 @@
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index dd815f0..acca4e5 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -333,12 +333,19 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -428,11 +435,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -1334,7 +1341,7 @@
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index 16c198b..bae4ee6 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -308,12 +308,19 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+# CONFIG_BFIN_L2_ICACHEABLE is not set
+# CONFIG_BFIN_L2_DCACHEABLE is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -395,11 +402,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
@@ -837,7 +844,7 @@
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 6b4c1a9..a6a7c8e 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -258,12 +258,18 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-CONFIG_BFIN_ICACHE_LOCK=y
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
#
# Asynchonous Memory Configuration
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 09701f9..ff377fa 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -295,11 +295,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -382,11 +388,11 @@
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
+# CONFIG_INET_DIAG is not set
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index ec84a53..814f9ca 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -279,12 +279,18 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
-CONFIG_L1_MAX_PIECE=16
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
+# CONFIG_MPU is not set
#
# Asynchonous Memory Configuration
diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig
index 6e27962..375e75a 100644
--- a/arch/blackfin/configs/TCM-BF537_defconfig
+++ b/arch/blackfin/configs/TCM-BF537_defconfig
@@ -287,11 +287,17 @@
# Cache Support
#
CONFIG_BFIN_ICACHE=y
+# CONFIG_BFIN_ICACHE_LOCK is not set
CONFIG_BFIN_DCACHE=y
# CONFIG_BFIN_DCACHE_BANKA is not set
-# CONFIG_BFIN_ICACHE_LOCK is not set
-CONFIG_BFIN_WB=y
-# CONFIG_BFIN_WT is not set
+CONFIG_BFIN_EXTMEM_ICACHEABLE=y
+CONFIG_BFIN_EXTMEM_DCACHEABLE=y
+CONFIG_BFIN_EXTMEM_WRITEBACK=y
+# CONFIG_BFIN_EXTMEM_WRITETHROUGH is not set
+
+#
+# Memory Protection Unit
+#
# CONFIG_MPU is not set
#
@@ -709,7 +715,7 @@
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h
index 8bb2cb1..4d44395 100644
--- a/arch/blackfin/include/asm/blackfin.h
+++ b/arch/blackfin/include/asm/blackfin.h
@@ -86,6 +86,7 @@
#endif /* __ASSEMBLY__ */
+#include <asm/mem_map.h>
#include <mach/blackfin.h>
#include <asm/bfin-global.h>
diff --git a/arch/blackfin/include/asm/cache.h b/arch/blackfin/include/asm/cache.h
index 2ef669e..477050a 100644
--- a/arch/blackfin/include/asm/cache.h
+++ b/arch/blackfin/include/asm/cache.h
@@ -35,10 +35,10 @@
#if defined(CONFIG_SMP) && \
!defined(CONFIG_BFIN_CACHE_COHERENT)
-# if defined(CONFIG_BFIN_ICACHE)
+# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
# define __ARCH_SYNC_CORE_ICACHE
# endif
-# if defined(CONFIG_BFIN_DCACHE)
+# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
# define __ARCH_SYNC_CORE_DCACHE
# endif
#ifndef __ASSEMBLY__
diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
index 5c17dee..7e55549e 100644
--- a/arch/blackfin/include/asm/cacheflush.h
+++ b/arch/blackfin/include/asm/cacheflush.h
@@ -56,7 +56,7 @@
static inline void flush_icache_range(unsigned start, unsigned end)
{
-#if defined(CONFIG_BFIN_WB)
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
blackfin_dcache_flush_range(start, end);
#endif
@@ -87,9 +87,9 @@
#else
# define invalidate_dcache_range(start,end) do { } while (0)
#endif
-#if defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_WB)
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
# define flush_dcache_range(start,end) blackfin_dcache_flush_range((start), (end))
-# define flush_dcache_page(page) blackfin_dflush_page(page_address(page))
+# define flush_dcache_page(page) blackfin_dflush_page(page_address(page))
#else
# define flush_dcache_range(start,end) do { } while (0)
# define flush_dcache_page(page) do { } while (0)
@@ -100,7 +100,7 @@
static inline int bfin_addr_dcacheable(unsigned long addr)
{
-#ifdef CONFIG_BFIN_DCACHE
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
if (addr < (_ramend - DMA_UNCACHED_REGION))
return 1;
#endif
@@ -109,7 +109,7 @@
addr >= _ramend && addr < physical_mem_end)
return 1;
-#ifndef CONFIG_BFIN_L2_NOT_CACHED
+#ifdef CONFIG_BFIN_L2_DCACHEABLE
if (addr >= L2_START && addr < L2_START + L2_LENGTH)
return 1;
#endif
diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h
index a75a6a9..c5dacf8 100644
--- a/arch/blackfin/include/asm/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -37,8 +37,6 @@
#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
-/*Use the menuconfig cache policy here - CONFIG_BFIN_WT/CONFIG_BFIN_WB*/
-
#if ANOMALY_05000158
#define ANOMALY_05000158_WORKAROUND 0x200
#else
@@ -47,10 +45,12 @@
#define CPLB_COMMON (CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
-#ifdef CONFIG_BFIN_WB /*Write Back Policy */
+#ifdef CONFIG_BFIN_EXTMEM_WRITEBACK
#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_COMMON)
-#else /*Write Through */
+#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON)
+#else
+#define SDRAM_DGENERIC (CPLB_COMMON)
#endif
#define SDRAM_DNON_CHBL (CPLB_COMMON)
@@ -61,21 +61,23 @@
#ifdef CONFIG_SMP
#define L2_ATTR (INITIAL_T | I_CPLB | D_CPLB)
-#define L2_IMEMORY (CPLB_COMMON)
-#define L2_DMEMORY (CPLB_LOCK | CPLB_COMMON)
+#define L2_IMEMORY (CPLB_COMMON | PAGE_SIZE_1MB)
+#define L2_DMEMORY (CPLB_LOCK | CPLB_COMMON | PAGE_SIZE_1MB)
#else
#define L2_ATTR (INITIAL_T | SWITCH_T | I_CPLB | D_CPLB)
-#define L2_IMEMORY (SDRAM_IGENERIC)
-
-# if defined(CONFIG_BFIN_L2_WB)
-# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_COMMON)
-# elif defined(CONFIG_BFIN_L2_WT)
-# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON)
-# elif defined(CONFIG_BFIN_L2_NOT_CACHED)
-# define L2_DMEMORY (CPLB_COMMON)
+# if defined(CONFIG_BFIN_L2_ICACHEABLE)
+# define L2_IMEMORY (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB)
# else
-# define L2_DMEMORY (0)
+# define L2_IMEMORY ( CPLB_USER_RD | CPLB_VALID | PAGE_SIZE_1MB)
+# endif
+
+# if defined(CONFIG_BFIN_L2_WRITEBACK)
+# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_COMMON | PAGE_SIZE_1MB)
+# elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
+# define L2_DMEMORY (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_COMMON | PAGE_SIZE_1MB)
+# else
+# define L2_DMEMORY (CPLB_COMMON | PAGE_SIZE_1MB)
# endif
#endif /* CONFIG_SMP */
diff --git a/arch/blackfin/include/asm/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
index d7d9148..ed6b1f3 100644
--- a/arch/blackfin/include/asm/dma-mapping.h
+++ b/arch/blackfin/include/asm/dma-mapping.h
@@ -95,4 +95,17 @@
enum dma_data_direction dir)
{
}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+ struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+}
+
#endif /* _BLACKFIN_DMA_MAPPING_H */
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index bbe1c37..87ba9ad 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,9 +35,9 @@
#include <asm/atomic.h>
#include <asm/traps.h>
-#define IPIPE_ARCH_STRING "1.10-00"
+#define IPIPE_ARCH_STRING "1.11-00"
#define IPIPE_MAJOR_NUMBER 1
-#define IPIPE_MINOR_NUMBER 10
+#define IPIPE_MINOR_NUMBER 11
#define IPIPE_PATCH_NUMBER 0
#ifdef CONFIG_SMP
@@ -207,7 +207,7 @@
int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
-#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#ifdef CONFIG_TICKSOURCE_CORETMR
#define IRQ_SYSTMR IRQ_CORETMR
#define IRQ_PRIOTMR IRQ_CORETMR
#else
@@ -240,8 +240,13 @@
#define ipipe_init_irq_threads() do { } while (0)
#define ipipe_start_irq_thread(irq, desc) 0
+#ifndef CONFIG_TICKSOURCE_GPTMR0
#define IRQ_SYSTMR IRQ_CORETMR
#define IRQ_PRIOTMR IRQ_CORETMR
+#else
+#define IRQ_SYSTMR IRQ_TIMER0
+#define IRQ_PRIOTMR CONFIG_IRQ_TIMER0
+#endif
#define __ipipe_root_tick_p(regs) 1
diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h
index 3e8acbd..490098f 100644
--- a/arch/blackfin/include/asm/ipipe_base.h
+++ b/arch/blackfin/include/asm/ipipe_base.h
@@ -51,23 +51,23 @@
extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
-static inline void __ipipe_stall_root(void)
-{
- volatile unsigned long *p = &__ipipe_root_status;
- set_bit(0, p);
-}
+#define __ipipe_stall_root() \
+ do { \
+ volatile unsigned long *p = &__ipipe_root_status; \
+ set_bit(0, p); \
+ } while (0)
-static inline unsigned long __ipipe_test_and_stall_root(void)
-{
- volatile unsigned long *p = &__ipipe_root_status;
- return test_and_set_bit(0, p);
-}
+#define __ipipe_test_and_stall_root() \
+ ({ \
+ volatile unsigned long *p = &__ipipe_root_status; \
+ test_and_set_bit(0, p); \
+ })
-static inline unsigned long __ipipe_test_root(void)
-{
- const unsigned long *p = &__ipipe_root_status;
- return test_bit(0, p);
-}
+#define __ipipe_test_root() \
+ ({ \
+ const unsigned long *p = &__ipipe_root_status; \
+ test_bit(0, p); \
+ })
#endif /* !__ASSEMBLY__ */
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 9a7f63a..42a15f5 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -22,13 +22,6 @@
/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
#include <mach/irq.h>
-/* Xenomai IPIPE helpers */
-#define local_irq_restore_hw(x) local_irq_restore(x)
-#define local_irq_save_hw(x) local_irq_save(x)
-#define local_irq_enable_hw(x) local_irq_enable(x)
-#define local_irq_disable_hw(x) local_irq_disable(x)
-#define irqs_disabled_hw(x) irqs_disabled(x)
-
#if ANOMALY_05000244 && defined(CONFIG_BFIN_ICACHE)
# define NOP_PAD_ANOMALY_05000244 "nop; nop;"
#else
diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h
index 139cba4..9b19a19 100644
--- a/arch/blackfin/include/asm/irqflags.h
+++ b/arch/blackfin/include/asm/irqflags.h
@@ -31,6 +31,150 @@
return flags;
}
+#ifdef CONFIG_IPIPE
+
+#include <linux/ipipe_base.h>
+#include <linux/ipipe_trace.h>
+
+#ifdef CONFIG_DEBUG_HWERR
+# define bfin_no_irqs 0x3f
+#else
+# define bfin_no_irqs 0x1f
+#endif
+
+#define raw_local_irq_disable() \
+ do { \
+ ipipe_check_context(ipipe_root_domain); \
+ __ipipe_stall_root(); \
+ barrier(); \
+ } while (0)
+
+static inline void raw_local_irq_enable(void)
+{
+ barrier();
+ ipipe_check_context(ipipe_root_domain);
+ __ipipe_unstall_root();
+}
+
+#define raw_local_save_flags_ptr(x) \
+ do { \
+ *(x) = __ipipe_test_root() ? bfin_no_irqs : bfin_irq_flags; \
+ } while (0)
+
+#define raw_local_save_flags(x) raw_local_save_flags_ptr(&(x))
+
+#define raw_irqs_disabled_flags(x) ((x) == bfin_no_irqs)
+
+#define raw_local_irq_save_ptr(x) \
+ do { \
+ *(x) = __ipipe_test_and_stall_root() ? bfin_no_irqs : bfin_irq_flags; \
+ barrier(); \
+ } while (0)
+
+#define raw_local_irq_save(x) \
+ do { \
+ ipipe_check_context(ipipe_root_domain); \
+ raw_local_irq_save_ptr(&(x)); \
+ } while (0)
+
+static inline unsigned long raw_mangle_irq_bits(int virt, unsigned long real)
+{
+ /*
+ * Merge virtual and real interrupt mask bits into a single
+ * 32bit word.
+ */
+ return (real & ~(1 << 31)) | ((virt != 0) << 31);
+}
+
+static inline int raw_demangle_irq_bits(unsigned long *x)
+{
+ int virt = (*x & (1 << 31)) != 0;
+ *x &= ~(1L << 31);
+ return virt;
+}
+
+static inline void local_irq_disable_hw_notrace(void)
+{
+ bfin_cli();
+}
+
+static inline void local_irq_enable_hw_notrace(void)
+{
+ bfin_sti(bfin_irq_flags);
+}
+
+#define local_save_flags_hw(flags) \
+ do { \
+ (flags) = bfin_read_IMASK(); \
+ } while (0)
+
+#define irqs_disabled_flags_hw(flags) (((flags) & ~0x3f) == 0)
+
+#define irqs_disabled_hw() \
+ ({ \
+ unsigned long flags; \
+ local_save_flags_hw(flags); \
+ irqs_disabled_flags_hw(flags); \
+ })
+
+static inline void local_irq_save_ptr_hw(unsigned long *flags)
+{
+ *flags = bfin_cli();
+#ifdef CONFIG_DEBUG_HWERR
+ bfin_sti(0x3f);
+#endif
+}
+
+#define local_irq_save_hw_notrace(flags) \
+ do { \
+ local_irq_save_ptr_hw(&(flags)); \
+ } while (0)
+
+static inline void local_irq_restore_hw_notrace(unsigned long flags)
+{
+ if (!irqs_disabled_flags_hw(flags))
+ local_irq_enable_hw_notrace();
+}
+
+#ifdef CONFIG_IPIPE_TRACE_IRQSOFF
+# define local_irq_disable_hw() \
+ do { \
+ if (!irqs_disabled_hw()) { \
+ local_irq_disable_hw_notrace(); \
+ ipipe_trace_begin(0x80000000); \
+ } \
+ } while (0)
+# define local_irq_enable_hw() \
+ do { \
+ if (irqs_disabled_hw()) { \
+ ipipe_trace_end(0x80000000); \
+ local_irq_enable_hw_notrace(); \
+ } \
+ } while (0)
+# define local_irq_save_hw(flags) \
+ do { \
+ local_save_flags_hw(flags); \
+ if (!irqs_disabled_flags_hw(flags)) { \
+ local_irq_disable_hw_notrace(); \
+ ipipe_trace_begin(0x80000001); \
+ } \
+ } while (0)
+# define local_irq_restore_hw(flags) \
+ do { \
+ if (!irqs_disabled_flags_hw(flags)) { \
+ ipipe_trace_end(0x80000001); \
+ local_irq_enable_hw_notrace(); \
+ } \
+ } while (0)
+#else /* !CONFIG_IPIPE_TRACE_IRQSOFF */
+# define local_irq_disable_hw() local_irq_disable_hw_notrace()
+# define local_irq_enable_hw() local_irq_enable_hw_notrace()
+# define local_irq_save_hw(flags) local_irq_save_hw_notrace(flags)
+# define local_irq_restore_hw(flags) local_irq_restore_hw_notrace(flags)
+#endif /* !CONFIG_IPIPE_TRACE_IRQSOFF */
+
+#else /* CONFIG_IPIPE */
+
static inline void raw_local_irq_disable(void)
{
bfin_cli();
@@ -44,12 +188,6 @@
#define raw_irqs_disabled_flags(flags) (((flags) & ~0x3f) == 0)
-static inline void raw_local_irq_restore(unsigned long flags)
-{
- if (!raw_irqs_disabled_flags(flags))
- raw_local_irq_enable();
-}
-
static inline unsigned long __raw_local_irq_save(void)
{
unsigned long flags = bfin_cli();
@@ -60,4 +198,18 @@
}
#define raw_local_irq_save(flags) do { (flags) = __raw_local_irq_save(); } while (0)
+#define local_irq_save_hw(flags) raw_local_irq_save(flags)
+#define local_irq_restore_hw(flags) raw_local_irq_restore(flags)
+#define local_irq_enable_hw() raw_local_irq_enable()
+#define local_irq_disable_hw() raw_local_irq_disable()
+#define irqs_disabled_hw() irqs_disabled()
+
+#endif /* !CONFIG_IPIPE */
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+ if (!raw_irqs_disabled_flags(flags))
+ raw_local_irq_enable();
+}
+
#endif
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index 61f7487..4179e32 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -59,7 +59,7 @@
#define SDRAM_tRP TRP_1
#define SDRAM_tRP_num 1
#define SDRAM_tRAS TRAS_4
-#define SDRAM_tRAS_num 3
+#define SDRAM_tRAS_num 4
#define SDRAM_tRCD TRCD_1
#define SDRAM_tWR TWR_2
#endif
@@ -89,6 +89,85 @@
#endif
#endif
+/*
+ * The BF526-EZ-Board changed SDRAM chips between revisions,
+ * so we use below timings to accommodate both.
+ */
+#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_8
+#define SDRAM_tRAS_num 8
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_7
+#define SDRAM_tRAS_num 7
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_6
+#define SDRAM_tRAS_num 6
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_5
+#define SDRAM_tRAS_num 5
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 4
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 4
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_2
+#define SDRAM_tRAS_num 2
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#endif
+
#if defined(CONFIG_MEM_MT48LC16M8A2TG_75) || \
defined(CONFIG_MEM_MT48LC8M32B2B5_7)
/*SDRAM INFORMATION: */
@@ -109,6 +188,13 @@
#define SDRAM_CL CL_3
#endif
+#if defined(CONFIG_MEM_MT48H32M16LFCJ_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_2
+#endif
+
#ifdef CONFIG_BFIN_KERNEL_CLOCK_MEMINIT_CALC
/* Equation from section 17 (p17-46) of BF533 HRM */
diff --git a/arch/blackfin/include/asm/mem_map.h b/arch/blackfin/include/asm/mem_map.h
index e92b310..5e21627 100644
--- a/arch/blackfin/include/asm/mem_map.h
+++ b/arch/blackfin/include/asm/mem_map.h
@@ -1,87 +1,84 @@
/*
- * mem_map.h
- * Common header file for blackfin family of processors.
+ * Common Blackfin memory map
*
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
-#ifndef _MEM_MAP_H_
-#define _MEM_MAP_H_
+#ifndef __BFIN_MEM_MAP_H__
+#define __BFIN_MEM_MAP_H__
#include <mach/mem_map.h>
-#ifndef __ASSEMBLY__
+/* Every Blackfin so far has MMRs like this */
+#ifndef COREMMR_BASE
+# define COREMMR_BASE 0xFFE00000
+#endif
+#ifndef SYSMMR_BASE
+# define SYSMMR_BASE 0xFFC00000
+#endif
-#ifdef CONFIG_SMP
-static inline ulong get_l1_scratch_start_cpu(int cpu)
-{
- return (cpu) ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START;
-}
-static inline ulong get_l1_code_start_cpu(int cpu)
-{
- return (cpu) ? COREB_L1_CODE_START : COREA_L1_CODE_START;
-}
-static inline ulong get_l1_data_a_start_cpu(int cpu)
-{
- return (cpu) ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START;
-}
-static inline ulong get_l1_data_b_start_cpu(int cpu)
-{
- return (cpu) ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START;
-}
+/* Every Blackfin so far has on-chip Scratch Pad SRAM like this */
+#ifndef L1_SCRATCH_START
+# define L1_SCRATCH_START 0xFFB00000
+# define L1_SCRATCH_LENGTH 0x1000
+#endif
-static inline ulong get_l1_scratch_start(void)
-{
- return get_l1_scratch_start_cpu(blackfin_core_id());
-}
-static inline ulong get_l1_code_start(void)
-{
- return get_l1_code_start_cpu(blackfin_core_id());
-}
-static inline ulong get_l1_data_a_start(void)
-{
- return get_l1_data_a_start_cpu(blackfin_core_id());
-}
-static inline ulong get_l1_data_b_start(void)
-{
- return get_l1_data_b_start_cpu(blackfin_core_id());
-}
+/* Most parts lack on-chip L2 SRAM */
+#ifndef L2_START
+# define L2_START 0
+# define L2_LENGTH 0
+#endif
-#else /* !CONFIG_SMP */
+/* Most parts lack on-chip L1 ROM */
+#ifndef L1_ROM_START
+# define L1_ROM_START 0
+# define L1_ROM_LENGTH 0
+#endif
-static inline ulong get_l1_scratch_start_cpu(int cpu)
+/* Allow wonky SMP ports to override this */
+#ifndef GET_PDA_SAFE
+# define GET_PDA_SAFE(preg) \
+ preg.l = _cpu_pda; \
+ preg.h = _cpu_pda;
+# define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
+
+# ifndef __ASSEMBLY__
+
+static inline unsigned long get_l1_scratch_start_cpu(int cpu)
{
return L1_SCRATCH_START;
}
-static inline ulong get_l1_code_start_cpu(int cpu)
+static inline unsigned long get_l1_code_start_cpu(int cpu)
{
return L1_CODE_START;
}
-static inline ulong get_l1_data_a_start_cpu(int cpu)
+static inline unsigned long get_l1_data_a_start_cpu(int cpu)
{
return L1_DATA_A_START;
}
-static inline ulong get_l1_data_b_start_cpu(int cpu)
+static inline unsigned long get_l1_data_b_start_cpu(int cpu)
{
return L1_DATA_B_START;
}
-static inline ulong get_l1_scratch_start(void)
+static inline unsigned long get_l1_scratch_start(void)
{
return get_l1_scratch_start_cpu(0);
}
-static inline ulong get_l1_code_start(void)
+static inline unsigned long get_l1_code_start(void)
{
return get_l1_code_start_cpu(0);
}
-static inline ulong get_l1_data_a_start(void)
+static inline unsigned long get_l1_data_a_start(void)
{
return get_l1_data_a_start_cpu(0);
}
-static inline ulong get_l1_data_b_start(void)
+static inline unsigned long get_l1_data_b_start(void)
{
return get_l1_data_b_start_cpu(0);
}
-#endif /* CONFIG_SMP */
-#endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLY__ */
+#endif /* !GET_PDA_SAFE */
-#endif /* _MEM_MAP_H_ */
+#endif
diff --git a/arch/blackfin/include/asm/system.h b/arch/blackfin/include/asm/system.h
index 294dbda..85e8f16 100644
--- a/arch/blackfin/include/asm/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -135,11 +135,13 @@
};
#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+#include <mach/blackfin.h>
+
static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
int size)
{
unsigned long tmp = 0;
- unsigned long flags = 0;
+ unsigned long flags;
local_irq_save_hw(flags);
diff --git a/arch/blackfin/include/asm/traps.h b/arch/blackfin/include/asm/traps.h
index 34f7295..3cdc454 100644
--- a/arch/blackfin/include/asm/traps.h
+++ b/arch/blackfin/include/asm/traps.h
@@ -111,9 +111,7 @@
level " bits in the Watchpoint Instruction Address Control register (WPIACTL) is set.\n"
#define EXC_0x2A(level) \
"Instruction fetch misaligned address violation\n" \
- level " - Attempted misaligned instruction cache fetch. On a misaligned instruction fetch\n" \
- level " exception, the return address provided in RETX is the destination address which is\n" \
- level " misaligned, rather than the address of the offending instruction.\n"
+ level " - Attempted misaligned instruction cache fetch.\n"
#define EXC_0x2B(level) \
"CPLB protection violation\n" \
level " - Illegal instruction fetch access (memory protection violation).\n"
diff --git a/arch/blackfin/include/asm/uaccess.h b/arch/blackfin/include/asm/uaccess.h
index 8894e9f..2f469a1 100644
--- a/arch/blackfin/include/asm/uaccess.h
+++ b/arch/blackfin/include/asm/uaccess.h
@@ -265,4 +265,26 @@
#define clear_user(to, n) __clear_user(to, n)
+/* How to interpret these return values:
+ * CORE: can be accessed by core load or dma memcpy
+ * CORE_ONLY: can only be accessed by core load
+ * DMA: can only be accessed by dma memcpy
+ * IDMA: can only be accessed by interprocessor dma memcpy (BF561)
+ * ITEST: can be accessed by isram memcpy or dma memcpy
+ */
+enum {
+ BFIN_MEM_ACCESS_CORE = 0,
+ BFIN_MEM_ACCESS_CORE_ONLY,
+ BFIN_MEM_ACCESS_DMA,
+ BFIN_MEM_ACCESS_IDMA,
+ BFIN_MEM_ACCESS_ITEST,
+};
+/**
+ * bfin_mem_access_type() - what kind of memory access is required
+ * @addr: the address to check
+ * @size: number of bytes needed
+ * @return: <0 is error, >=0 is BFIN_MEM_ACCESS_xxx enum (see above)
+ */
+int bfin_mem_access_type(unsigned long addr, unsigned long size);
+
#endif /* _BLACKFIN_UACCESS_H */
diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h
index da35133..c8e7ee4 100644
--- a/arch/blackfin/include/asm/unistd.h
+++ b/arch/blackfin/include/asm/unistd.h
@@ -381,8 +381,9 @@
#define __NR_preadv 366
#define __NR_pwritev 367
#define __NR_rt_tgsigqueueinfo 368
+#define __NR_perf_counter_open 369
-#define __NR_syscall 369
+#define __NR_syscall 370
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 3731088..141d928 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -20,7 +20,6 @@
CFLAGS_REMOVE_ftrace.o = -pg
obj-$(CONFIG_IPIPE) += ipipe.o
-obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
index c006a44..36193ee 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c
@@ -46,13 +46,13 @@
printk(KERN_INFO "MPU: setting up cplb tables with memory protection\n");
-#ifdef CONFIG_BFIN_ICACHE
+#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
i_cache = CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
#endif
-#ifdef CONFIG_BFIN_DCACHE
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
d_cache = CPLB_L1_CHBL;
-#ifdef CONFIG_BFIN_WT
+#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH
d_cache |= CPLB_L1_AOW | CPLB_WT;
#endif
#endif
@@ -91,9 +91,9 @@
/* Cover L2 memory */
#if L2_LENGTH > 0
dcplb_tbl[cpu][i_d].addr = L2_START;
- dcplb_tbl[cpu][i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB;
+ dcplb_tbl[cpu][i_d++].data = L2_DMEMORY;
icplb_tbl[cpu][i_i].addr = L2_START;
- icplb_tbl[cpu][i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB;
+ icplb_tbl[cpu][i_i++].data = L2_IMEMORY;
#endif
first_mask_dcplb = i_d;
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
index 784923e..bcdfe9b 100644
--- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
+++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c
@@ -150,15 +150,19 @@
nr_dcplb_miss[cpu]++;
d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
-#ifdef CONFIG_BFIN_DCACHE
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
if (bfin_addr_dcacheable(addr)) {
d_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
-#ifdef CONFIG_BFIN_WT
+# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
d_data |= CPLB_L1_AOW | CPLB_WT;
-#endif
+# endif
}
#endif
- if (addr >= physical_mem_end) {
+
+ if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+ addr = L2_START;
+ d_data = L2_DMEMORY;
+ } else if (addr >= physical_mem_end) {
if (addr >= ASYNC_BANK0_BASE && addr < ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE
&& (status & FAULT_USERSUPV)) {
addr &= ~0x3fffff;
@@ -235,7 +239,7 @@
i_data = CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4KB;
-#ifdef CONFIG_BFIN_ICACHE
+#ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
/*
* Normal RAM, and possibly the reserved memory area, are
* cacheable.
@@ -245,7 +249,10 @@
i_data |= CPLB_L1_CHBL | ANOMALY_05000158_WORKAROUND;
#endif
- if (addr >= physical_mem_end) {
+ if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+ addr = L2_START;
+ i_data = L2_IMEMORY;
+ } else if (addr >= physical_mem_end) {
if (addr >= BOOT_ROM_START && addr < BOOT_ROM_START + BOOT_ROM_LENGTH
&& (status & FAULT_USERSUPV)) {
addr &= ~(1 * 1024 * 1024 - 1);
@@ -365,13 +372,18 @@
local_irq_save_hw(flags);
current_rwx_mask[cpu] = masks;
- d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
-#ifdef CONFIG_BFIN_DCACHE
- d_data |= CPLB_L1_CHBL;
-#ifdef CONFIG_BFIN_WT
- d_data |= CPLB_L1_AOW | CPLB_WT;
+ if (L2_LENGTH && addr >= L2_START && addr < L2_START + L2_LENGTH) {
+ addr = L2_START;
+ d_data = L2_DMEMORY;
+ } else {
+ d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB;
+#ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE
+ d_data |= CPLB_L1_CHBL;
+# ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH
+ d_data |= CPLB_L1_AOW | CPLB_WT;
+# endif
#endif
-#endif
+ }
disable_dcplb();
for (i = first_mask_dcplb; i < first_switched_dcplb; i++) {
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index d8cde1f..b8d2203 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -52,7 +52,7 @@
atomic_t __ipipe_irq_lvdepth[IVG15 + 1];
-unsigned long __ipipe_irq_lvmask = __all_masked_irq_flags;
+unsigned long __ipipe_irq_lvmask = bfin_no_irqs;
EXPORT_SYMBOL(__ipipe_irq_lvmask);
static void __ipipe_ack_irq(unsigned irq, struct irq_desc *desc)
@@ -342,8 +342,3 @@
}
EXPORT_SYMBOL(show_stack);
-
-#ifdef CONFIG_IPIPE_TRACE_MCOUNT
-void notrace _mcount(void);
-EXPORT_SYMBOL(_mcount);
-#endif /* CONFIG_IPIPE_TRACE_MCOUNT */
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 6e31e93..4b5fd36 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -38,38 +38,15 @@
#include <asm/pda.h>
static atomic_t irq_err_count;
-static spinlock_t irq_controller_lock;
-
-/*
- * Dummy mask/unmask handler
- */
-void dummy_mask_unmask_irq(unsigned int irq)
-{
-}
-
void ack_bad_irq(unsigned int irq)
{
atomic_inc(&irq_err_count);
printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
}
-static struct irq_chip bad_chip = {
- .ack = dummy_mask_unmask_irq,
- .mask = dummy_mask_unmask_irq,
- .unmask = dummy_mask_unmask_irq,
-};
-
-static int bad_stats;
static struct irq_desc bad_irq_desc = {
- .status = IRQ_DISABLED,
- .chip = &bad_chip,
.handle_irq = handle_bad_irq,
- .depth = 1,
.lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
- .kstat_irqs = &bad_stats,
-#ifdef CONFIG_SMP
- .affinity = CPU_MASK_ALL
-#endif
};
#ifdef CONFIG_CPUMASK_OFFSTACK
@@ -77,6 +54,7 @@
#error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK."
#endif
+#ifdef CONFIG_PROC_FS
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
@@ -108,50 +86,29 @@
}
return 0;
}
-
-/*
- * do_IRQ handles all hardware IRQs. Decoded IRQs should not
- * come via this function. Instead, they should provide their
- * own 'handler'
- */
-#ifdef CONFIG_DO_IRQ_L1
-__attribute__((l1_text))
#endif
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
- struct pt_regs *old_regs;
- struct irq_desc *desc = irq_desc + irq;
-#ifndef CONFIG_IPIPE
- unsigned short pending, other_ints;
-#endif
- old_regs = set_irq_regs(regs);
- /*
- * Some hardware gives randomly wrong interrupts. Rather
- * than crashing, do something sensible.
- */
- if (irq >= NR_IRQS)
- desc = &bad_irq_desc;
-
- irq_enter();
#ifdef CONFIG_DEBUG_STACKOVERFLOW
+static void check_stack_overflow(int irq)
+{
/* Debugging check for stack overflow: is there less than STACK_WARN free? */
- {
- long sp;
+ long sp = __get_SP() & (THREAD_SIZE - 1);
- sp = __get_SP() & (THREAD_SIZE-1);
-
- if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
- dump_stack();
- printk(KERN_EMERG "%s: possible stack overflow while handling irq %i "
- " only %ld bytes free\n",
- __func__, irq, sp - sizeof(struct thread_info));
- }
+ if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+ dump_stack();
+ pr_emerg("irq%i: possible stack overflow only %ld bytes free\n",
+ irq, sp - sizeof(struct thread_info));
}
+}
+#else
+static inline void check_stack_overflow(int irq) { }
#endif
- generic_handle_irq(irq);
#ifndef CONFIG_IPIPE
+static void maybe_lower_to_irq14(void)
+{
+ unsigned short pending, other_ints;
+
/*
* If we're the only interrupt running (ignoring IRQ15 which
* is for syscalls), lower our priority to IRQ14 so that
@@ -165,7 +122,38 @@
other_ints = pending & (pending - 1);
if (other_ints == 0)
lower_to_irq14();
-#endif /* !CONFIG_IPIPE */
+}
+#else
+static inline void maybe_lower_to_irq14(void) { }
+#endif
+
+/*
+ * do_IRQ handles all hardware IRQs. Decoded IRQs should not
+ * come via this function. Instead, they should provide their
+ * own 'handler'
+ */
+#ifdef CONFIG_DO_IRQ_L1
+__attribute__((l1_text))
+#endif
+asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+
+ irq_enter();
+
+ check_stack_overflow(irq);
+
+ /*
+ * Some hardware gives randomly wrong interrupts. Rather
+ * than crashing, do something sensible.
+ */
+ if (irq >= NR_IRQS)
+ handle_bad_irq(irq, &bad_irq_desc);
+ else
+ generic_handle_irq(irq);
+
+ maybe_lower_to_irq14();
+
irq_exit();
set_irq_regs(old_regs);
@@ -173,14 +161,6 @@
void __init init_IRQ(void)
{
- struct irq_desc *desc;
- int irq;
-
- spin_lock_init(&irq_controller_lock);
- for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
- *desc = bad_irq_desc;
- }
-
init_arch_irq();
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index da28f79..cce79d0 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -34,15 +34,6 @@
#error change the definition of slavecpulocks
#endif
-#define IN_MEM(addr, size, l1_addr, l1_size) \
-({ \
- unsigned long __addr = (unsigned long)(addr); \
- (l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \
-})
-#define ASYNC_BANK_SIZE \
- (ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
- ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE)
-
void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
{
gdb_regs[BFIN_R0] = regs->r0;
@@ -463,40 +454,87 @@
static int validate_memory_access_address(unsigned long addr, int size)
{
- int cpu = raw_smp_processor_id();
-
- if (size < 0)
+ if (size < 0 || addr == 0)
return -EFAULT;
- if (addr >= 0x1000 && (addr + size) <= physical_mem_end)
- return 0;
- if (addr >= SYSMMR_BASE)
- return 0;
- if (IN_MEM(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE))
- return 0;
- if (cpu == 0) {
- if (IN_MEM(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+ return bfin_mem_access_type(addr, size);
+}
+
+static int bfin_probe_kernel_read(char *dst, char *src, int size)
+{
+ unsigned long lsrc = (unsigned long)src;
+ int mem_type;
+
+ mem_type = validate_memory_access_address(lsrc, size);
+ if (mem_type < 0)
+ return mem_type;
+
+ if (lsrc >= SYSMMR_BASE) {
+ if (size == 2 && lsrc % 2 == 0) {
+ u16 mmr = bfin_read16(src);
+ memcpy(dst, &mmr, sizeof(mmr));
return 0;
- if (IN_MEM(addr, size, L1_CODE_START, L1_CODE_LENGTH))
+ } else if (size == 4 && lsrc % 4 == 0) {
+ u32 mmr = bfin_read32(src);
+ memcpy(dst, &mmr, sizeof(mmr));
return 0;
- if (IN_MEM(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH))
- return 0;
- if (IN_MEM(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
- return 0;
-#ifdef CONFIG_SMP
- } else if (cpu == 1) {
- if (IN_MEM(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
- return 0;
- if (IN_MEM(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
- return 0;
- if (IN_MEM(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
- return 0;
- if (IN_MEM(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
- return 0;
-#endif
+ }
+ } else {
+ switch (mem_type) {
+ case BFIN_MEM_ACCESS_CORE:
+ case BFIN_MEM_ACCESS_CORE_ONLY:
+ return probe_kernel_read(dst, src, size);
+ /* XXX: should support IDMA here with SMP */
+ case BFIN_MEM_ACCESS_DMA:
+ if (dma_memcpy(dst, src, size))
+ return 0;
+ break;
+ case BFIN_MEM_ACCESS_ITEST:
+ if (isram_memcpy(dst, src, size))
+ return 0;
+ break;
+ }
}
- if (IN_MEM(addr, size, L2_START, L2_LENGTH))
- return 0;
+ return -EFAULT;
+}
+
+static int bfin_probe_kernel_write(char *dst, char *src, int size)
+{
+ unsigned long ldst = (unsigned long)dst;
+ int mem_type;
+
+ mem_type = validate_memory_access_address(ldst, size);
+ if (mem_type < 0)
+ return mem_type;
+
+ if (ldst >= SYSMMR_BASE) {
+ if (size == 2 && ldst % 2 == 0) {
+ u16 mmr;
+ memcpy(&mmr, src, sizeof(mmr));
+ bfin_write16(dst, mmr);
+ return 0;
+ } else if (size == 4 && ldst % 4 == 0) {
+ u32 mmr;
+ memcpy(&mmr, src, sizeof(mmr));
+ bfin_write32(dst, mmr);
+ return 0;
+ }
+ } else {
+ switch (mem_type) {
+ case BFIN_MEM_ACCESS_CORE:
+ case BFIN_MEM_ACCESS_CORE_ONLY:
+ return probe_kernel_write(dst, src, size);
+ /* XXX: should support IDMA here with SMP */
+ case BFIN_MEM_ACCESS_DMA:
+ if (dma_memcpy(dst, src, size))
+ return 0;
+ break;
+ case BFIN_MEM_ACCESS_ITEST:
+ if (isram_memcpy(dst, src, size))
+ return 0;
+ break;
+ }
+ }
return -EFAULT;
}
@@ -509,14 +547,6 @@
{
char *tmp;
int err;
- unsigned char *pch;
- unsigned short mmr16;
- unsigned long mmr32;
- int cpu = raw_smp_processor_id();
-
- err = validate_memory_access_address((unsigned long)mem, count);
- if (err)
- return err;
/*
* We use the upper half of buf as an intermediate buffer for the
@@ -524,44 +554,7 @@
*/
tmp = buf + count;
- if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
- switch (count) {
- case 2:
- if ((unsigned int)mem % 2 == 0) {
- mmr16 = *(unsigned short *)mem;
- pch = (unsigned char *)&mmr16;
- *tmp++ = *pch++;
- *tmp++ = *pch++;
- tmp -= 2;
- } else
- err = -EFAULT;
- break;
- case 4:
- if ((unsigned int)mem % 4 == 0) {
- mmr32 = *(unsigned long *)mem;
- pch = (unsigned char *)&mmr32;
- *tmp++ = *pch++;
- *tmp++ = *pch++;
- *tmp++ = *pch++;
- *tmp++ = *pch++;
- tmp -= 4;
- } else
- err = -EFAULT;
- break;
- default:
- err = -EFAULT;
- }
- } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
- || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
- ) {
- /* access L1 instruction SRAM*/
- if (dma_memcpy(tmp, mem, count) == NULL)
- err = -EFAULT;
- } else
- err = probe_kernel_read(tmp, mem, count);
-
+ err = bfin_probe_kernel_read(tmp, mem, count);
if (!err) {
while (count > 0) {
buf = pack_hex_byte(buf, *tmp);
@@ -582,13 +575,8 @@
*/
int kgdb_ebin2mem(char *buf, char *mem, int count)
{
- char *tmp_old;
- char *tmp_new;
- unsigned short *mmr16;
- unsigned long *mmr32;
- int err;
+ char *tmp_old, *tmp_new;
int size;
- int cpu = raw_smp_processor_id();
tmp_old = tmp_new = buf;
@@ -601,41 +589,7 @@
tmp_old++;
}
- err = validate_memory_access_address((unsigned long)mem, size);
- if (err)
- return err;
-
- if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
- switch (size) {
- case 2:
- if ((unsigned int)mem % 2 == 0) {
- mmr16 = (unsigned short *)buf;
- *(unsigned short *)mem = *mmr16;
- } else
- err = -EFAULT;
- break;
- case 4:
- if ((unsigned int)mem % 4 == 0) {
- mmr32 = (unsigned long *)buf;
- *(unsigned long *)mem = *mmr32;
- } else
- err = -EFAULT;
- break;
- default:
- err = -EFAULT;
- }
- } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
- || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
- ) {
- /* access L1 instruction SRAM */
- if (dma_memcpy(mem, buf, size) == NULL)
- err = -EFAULT;
- } else
- err = probe_kernel_write(mem, buf, size);
-
- return err;
+ return bfin_probe_kernel_write(mem, buf, count);
}
/*
@@ -645,16 +599,7 @@
*/
int kgdb_hex2mem(char *buf, char *mem, int count)
{
- char *tmp_raw;
- char *tmp_hex;
- unsigned short *mmr16;
- unsigned long *mmr32;
- int err;
- int cpu = raw_smp_processor_id();
-
- err = validate_memory_access_address((unsigned long)mem, count);
- if (err)
- return err;
+ char *tmp_raw, *tmp_hex;
/*
* We use the upper half of buf as an intermediate buffer for the
@@ -669,39 +614,18 @@
*tmp_raw |= hex(*tmp_hex--) << 4;
}
- if ((unsigned int)mem >= SYSMMR_BASE) { /*access MMR registers*/
- switch (count) {
- case 2:
- if ((unsigned int)mem % 2 == 0) {
- mmr16 = (unsigned short *)tmp_raw;
- *(unsigned short *)mem = *mmr16;
- } else
- err = -EFAULT;
- break;
- case 4:
- if ((unsigned int)mem % 4 == 0) {
- mmr32 = (unsigned long *)tmp_raw;
- *(unsigned long *)mem = *mmr32;
- } else
- err = -EFAULT;
- break;
- default:
- err = -EFAULT;
- }
- } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
- || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
- ) {
- /* access L1 instruction SRAM */
- if (dma_memcpy(mem, tmp_raw, count) == NULL)
- err = -EFAULT;
- } else
- err = probe_kernel_write(mem, tmp_raw, count);
-
- return err;
+ return bfin_probe_kernel_write(mem, tmp_raw, count);
}
+#define IN_MEM(addr, size, l1_addr, l1_size) \
+({ \
+ unsigned long __addr = (unsigned long)(addr); \
+ (l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \
+})
+#define ASYNC_BANK_SIZE \
+ (ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \
+ ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE)
+
int kgdb_validate_break_address(unsigned long addr)
{
int cpu = raw_smp_processor_id();
@@ -724,46 +648,17 @@
int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
{
- int err;
- int cpu = raw_smp_processor_id();
-
- if ((cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH))
-#ifdef CONFIG_SMP
- || (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH))
-#endif
- ) {
- /* access L1 instruction SRAM */
- if (dma_memcpy(saved_instr, (void *)addr, BREAK_INSTR_SIZE)
- == NULL)
- return -EFAULT;
-
- if (dma_memcpy((void *)addr, arch_kgdb_ops.gdb_bpt_instr,
- BREAK_INSTR_SIZE) == NULL)
- return -EFAULT;
-
- return 0;
- } else {
- err = probe_kernel_read(saved_instr, (char *)addr,
- BREAK_INSTR_SIZE);
- if (err)
- return err;
-
- return probe_kernel_write((char *)addr,
- arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
- }
+ int err = bfin_probe_kernel_read(saved_instr, (char *)addr,
+ BREAK_INSTR_SIZE);
+ if (err)
+ return err;
+ return bfin_probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
+ BREAK_INSTR_SIZE);
}
int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
{
- if (IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) {
- /* access L1 instruction SRAM */
- if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL)
- return -EFAULT;
-
- return 0;
- } else
- return probe_kernel_write((char *)addr,
- (char *)bundle, BREAK_INSTR_SIZE);
+ return bfin_probe_kernel_write((char *)addr, bundle, BREAK_INSTR_SIZE);
}
int kgdb_arch_init(void)
diff --git a/arch/blackfin/kernel/mcount.S b/arch/blackfin/kernel/mcount.S
deleted file mode 100644
index edcfb38..0000000
--- a/arch/blackfin/kernel/mcount.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * linux/arch/blackfin/mcount.S
- *
- * Copyright (C) 2006 Analog Devices Inc.
- *
- * 2007/04/12 Save index, length, modify and base registers. --rpm
- */
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-.text
-
-.align 4 /* just in case */
-
-ENTRY(__mcount)
- [--sp] = i0;
- [--sp] = i1;
- [--sp] = i2;
- [--sp] = i3;
- [--sp] = l0;
- [--sp] = l1;
- [--sp] = l2;
- [--sp] = l3;
- [--sp] = m0;
- [--sp] = m1;
- [--sp] = m2;
- [--sp] = m3;
- [--sp] = b0;
- [--sp] = b1;
- [--sp] = b2;
- [--sp] = b3;
- [--sp] = ( r7:0, p5:0 );
- [--sp] = ASTAT;
-
- p1.L = _ipipe_trace_enable;
- p1.H = _ipipe_trace_enable;
- r7 = [p1];
- CC = r7 == 0;
- if CC jump out;
- link 0x10;
- r0 = 0x0;
- [sp + 0xc] = r0; /* v */
- r0 = 0x0; /* type: IPIPE_TRACE_FN */
- r1 = rets;
- p0 = [fp]; /* p0: Prior FP */
- r2 = [p0 + 4]; /* r2: Prior RETS */
- call ___ipipe_trace;
- unlink;
-out:
- ASTAT = [sp++];
- ( r7:0, p5:0 ) = [sp++];
- b3 = [sp++];
- b2 = [sp++];
- b1 = [sp++];
- b0 = [sp++];
- m3 = [sp++];
- m2 = [sp++];
- m1 = [sp++];
- m0 = [sp++];
- l3 = [sp++];
- l2 = [sp++];
- l1 = [sp++];
- l0 = [sp++];
- i3 = [sp++];
- i2 = [sp++];
- i1 = [sp++];
- i0 = [sp++];
- rts;
-ENDPROC(__mcount)
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 3e1d86e..79cad0a 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -344,6 +344,87 @@
}
}
+static inline
+int in_mem(unsigned long addr, unsigned long size,
+ unsigned long start, unsigned long end)
+{
+ return addr >= start && addr + size <= end;
+}
+static inline
+int in_mem_const_off(unsigned long addr, unsigned long size, unsigned long off,
+ unsigned long const_addr, unsigned long const_size)
+{
+ return const_size &&
+ in_mem(addr, size, const_addr + off, const_addr + const_size);
+}
+static inline
+int in_mem_const(unsigned long addr, unsigned long size,
+ unsigned long const_addr, unsigned long const_size)
+{
+ return in_mem_const_off(addr, 0, size, const_addr, const_size);
+}
+#define IN_ASYNC(bnum, bctlnum) \
+({ \
+ (bfin_read_EBIU_AMGCTL() & 0xe) < ((bnum + 1) << 1) ? -EFAULT : \
+ bfin_read_EBIU_AMBCTL##bctlnum() & B##bnum##RDYEN ? -EFAULT : \
+ BFIN_MEM_ACCESS_CORE; \
+})
+
+int bfin_mem_access_type(unsigned long addr, unsigned long size)
+{
+ int cpu = raw_smp_processor_id();
+
+ /* Check that things do not wrap around */
+ if (addr > ULONG_MAX - size)
+ return -EFAULT;
+
+ if (in_mem(addr, size, FIXED_CODE_START, physical_mem_end))
+ return BFIN_MEM_ACCESS_CORE;
+
+ if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
+ return cpu == 0 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
+ if (in_mem_const(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+ return cpu == 0 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
+ if (in_mem_const(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH))
+ return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+ if (in_mem_const(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH))
+ return cpu == 0 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+#ifdef COREB_L1_CODE_START
+ if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+ return cpu == 1 ? BFIN_MEM_ACCESS_ITEST : BFIN_MEM_ACCESS_IDMA;
+ if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+ return cpu == 1 ? BFIN_MEM_ACCESS_CORE_ONLY : -EFAULT;
+ if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+ return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+ if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
+ return cpu == 1 ? BFIN_MEM_ACCESS_CORE : BFIN_MEM_ACCESS_IDMA;
+#endif
+ if (in_mem_const(addr, size, L2_START, L2_LENGTH))
+ return BFIN_MEM_ACCESS_CORE;
+
+ if (addr >= SYSMMR_BASE)
+ return BFIN_MEM_ACCESS_CORE_ONLY;
+
+ /* We can't read EBIU banks that aren't enabled or we end up hanging
+ * on the access to the async space.
+ */
+ if (in_mem_const(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK0_SIZE))
+ return IN_ASYNC(0, 0);
+ if (in_mem_const(addr, size, ASYNC_BANK1_BASE, ASYNC_BANK1_SIZE))
+ return IN_ASYNC(1, 0);
+ if (in_mem_const(addr, size, ASYNC_BANK2_BASE, ASYNC_BANK2_SIZE))
+ return IN_ASYNC(2, 1);
+ if (in_mem_const(addr, size, ASYNC_BANK3_BASE, ASYNC_BANK3_SIZE))
+ return IN_ASYNC(3, 1);
+
+ if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
+ return BFIN_MEM_ACCESS_CORE;
+ if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
+ return BFIN_MEM_ACCESS_DMA;
+
+ return -EFAULT;
+}
+
#if defined(CONFIG_ACCESS_CHECK)
#ifdef CONFIG_ACCESS_OK_L1
__attribute__((l1_text))
@@ -353,51 +434,61 @@
{
if (size == 0)
return 1;
- if (addr > (addr + size))
+ /* Check that things do not wrap around */
+ if (addr > ULONG_MAX - size)
return 0;
if (segment_eq(get_fs(), KERNEL_DS))
return 1;
#ifdef CONFIG_MTD_UCLINUX
- if (addr >= memory_start && (addr + size) <= memory_end)
- return 1;
- if (addr >= memory_mtd_end && (addr + size) <= physical_mem_end)
+ if (1)
+#else
+ if (0)
+#endif
+ {
+ if (in_mem(addr, size, memory_start, memory_end))
+ return 1;
+ if (in_mem(addr, size, memory_mtd_end, physical_mem_end))
+ return 1;
+# ifndef CONFIG_ROMFS_ON_MTD
+ if (0)
+# endif
+ /* For XIP, allow user space to use pointers within the ROMFS. */
+ if (in_mem(addr, size, memory_mtd_start, memory_mtd_end))
+ return 1;
+ } else {
+ if (in_mem(addr, size, memory_start, physical_mem_end))
+ return 1;
+ }
+
+ if (in_mem(addr, size, (unsigned long)__init_begin, (unsigned long)__init_end))
return 1;
-#ifdef CONFIG_ROMFS_ON_MTD
- /* For XIP, allow user space to use pointers within the ROMFS. */
- if (addr >= memory_mtd_start && (addr + size) <= memory_mtd_end)
+ if (in_mem_const(addr, size, L1_CODE_START, L1_CODE_LENGTH))
+ return 1;
+ if (in_mem_const_off(addr, size, _etext_l1 - _stext_l1, L1_CODE_START, L1_CODE_LENGTH))
+ return 1;
+ if (in_mem_const_off(addr, size, _ebss_l1 - _sdata_l1, L1_DATA_A_START, L1_DATA_A_LENGTH))
+ return 1;
+ if (in_mem_const_off(addr, size, _ebss_b_l1 - _sdata_b_l1, L1_DATA_B_START, L1_DATA_B_LENGTH))
+ return 1;
+#ifdef COREB_L1_CODE_START
+ if (in_mem_const(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH))
+ return 1;
+ if (in_mem_const(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH))
+ return 1;
+ if (in_mem_const(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH))
+ return 1;
+ if (in_mem_const(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH))
return 1;
#endif
-#else
- if (addr >= memory_start && (addr + size) <= physical_mem_end)
+ if (in_mem_const_off(addr, size, _ebss_l2 - _stext_l2, L2_START, L2_LENGTH))
return 1;
-#endif
- if (addr >= (unsigned long)__init_begin &&
- addr + size <= (unsigned long)__init_end)
+
+ if (in_mem_const(addr, size, BOOT_ROM_START, BOOT_ROM_LENGTH))
return 1;
- if (addr >= get_l1_scratch_start()
- && addr + size <= get_l1_scratch_start() + L1_SCRATCH_LENGTH)
+ if (in_mem_const(addr, size, L1_ROM_START, L1_ROM_LENGTH))
return 1;
-#if L1_CODE_LENGTH != 0
- if (addr >= get_l1_code_start() + (_etext_l1 - _stext_l1)
- && addr + size <= get_l1_code_start() + L1_CODE_LENGTH)
- return 1;
-#endif
-#if L1_DATA_A_LENGTH != 0
- if (addr >= get_l1_data_a_start() + (_ebss_l1 - _sdata_l1)
- && addr + size <= get_l1_data_a_start() + L1_DATA_A_LENGTH)
- return 1;
-#endif
-#if L1_DATA_B_LENGTH != 0
- if (addr >= get_l1_data_b_start() + (_ebss_b_l1 - _sdata_b_l1)
- && addr + size <= get_l1_data_b_start() + L1_DATA_B_LENGTH)
- return 1;
-#endif
-#if L2_LENGTH != 0
- if (addr >= L2_START + (_ebss_l2 - _stext_l2)
- && addr + size <= L2_START + L2_LENGTH)
- return 1;
-#endif
+
return 0;
}
EXPORT_SYMBOL(_access_ok);
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 6454bab..298f023 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -117,15 +117,49 @@
*/
#ifdef CONFIG_BFIN_ICACHE
printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
-#endif
-#ifdef CONFIG_BFIN_DCACHE
- printk(KERN_INFO "Data Cache Enabled for CPU%u"
-# if defined CONFIG_BFIN_WB
- " (write-back)"
-# elif defined CONFIG_BFIN_WT
- " (write-through)"
+ printk(KERN_INFO " External memory:"
+# ifdef CONFIG_BFIN_EXTMEM_ICACHEABLE
+ " cacheable"
+# else
+ " uncacheable"
# endif
- "\n", cpu);
+ " in instruction cache\n");
+ if (L2_LENGTH)
+ printk(KERN_INFO " L2 SRAM :"
+# ifdef CONFIG_BFIN_L2_ICACHEABLE
+ " cacheable"
+# else
+ " uncacheable"
+# endif
+ " in instruction cache\n");
+
+#else
+ printk(KERN_INFO "Instruction Cache Disabled for CPU%u\n", cpu);
+#endif
+
+#ifdef CONFIG_BFIN_DCACHE
+ printk(KERN_INFO "Data Cache Enabled for CPU%u\n", cpu);
+ printk(KERN_INFO " External memory:"
+# if defined CONFIG_BFIN_EXTMEM_WRITEBACK
+ " cacheable (write-back)"
+# elif defined CONFIG_BFIN_EXTMEM_WRITETHROUGH
+ " cacheable (write-through)"
+# else
+ " uncacheable"
+# endif
+ " in data cache\n");
+ if (L2_LENGTH)
+ printk(KERN_INFO " L2 SRAM :"
+# if defined CONFIG_BFIN_L2_WRITEBACK
+ " cacheable (write-back)"
+# elif defined CONFIG_BFIN_L2_WRITETHROUGH
+ " cacheable (write-through)"
+# else
+ " uncacheable"
+# endif
+ " in data cache\n");
+#else
+ printk(KERN_INFO "Data Cache Disabled for CPU%u\n", cpu);
#endif
}
@@ -443,9 +477,11 @@
} else if (!memcmp(to, "clkin_hz=", 9)) {
to += 9;
early_init_clkin_hz(to);
+#ifdef CONFIG_EARLY_PRINTK
} else if (!memcmp(to, "earlyprintk=", 12)) {
to += 12;
setup_early_printk(to);
+#endif
} else if (!memcmp(to, "memmap=", 7)) {
to += 7;
parse_memmap(to);
@@ -516,7 +552,7 @@
&& ((unsigned long *)mtd_phys)[1] == ROMSB_WORD1)
mtd_size =
PAGE_ALIGN(be32_to_cpu(((unsigned long *)mtd_phys)[2]));
-# if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+# if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -544,7 +580,7 @@
dma_memcpy((void *)uclinux_ram_map.phys, _end, uclinux_ram_map.size);
#endif /* CONFIG_MTD_UCLINUX */
-#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
/* Due to a Hardware Anomaly we need to limit the size of usable
* instruction memory to max 60MB, 56 if HUNT_FOR_ZERO is on
* 05000263 - Hardware loop corrupted when taking an ICPLB exception
@@ -764,6 +800,11 @@
{
unsigned long sclk, cclk;
+ /* Check to make sure we are running on the right processor */
+ if (unlikely(CPUID != bfin_cpuid()))
+ printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
+ CPU, bfin_cpuid(), bfin_revid());
+
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
@@ -778,14 +819,17 @@
memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
- /* setup memory defaults from the user config */
- physical_mem_end = 0;
- _ramend = get_mem_size() * 1024 * 1024;
-
memset(&bfin_memmap, 0, sizeof(bfin_memmap));
+ /* If the user does not specify things on the command line, use
+ * what the bootloader set things up as
+ */
+ physical_mem_end = 0;
parse_cmdline_early(&command_line[0]);
+ if (_ramend == 0)
+ _ramend = get_mem_size() * 1024 * 1024;
+
if (physical_mem_end == 0)
physical_mem_end = _ramend;
@@ -837,7 +881,8 @@
defined(CONFIG_BF538) || defined(CONFIG_BF539)
_bfin_swrst = bfin_read_SWRST();
#else
- _bfin_swrst = bfin_read_SYSCR();
+ /* Clear boot mode field */
+ _bfin_swrst = bfin_read_SYSCR() & ~0xf;
#endif
#ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
@@ -875,10 +920,7 @@
else
printk(KERN_INFO "Compiled for ADSP-%s Rev 0.%d\n", CPU, bfin_compiled_revid());
- if (unlikely(CPUID != bfin_cpuid()))
- printk(KERN_ERR "ERROR: Not running on ADSP-%s: unknown CPUID 0x%04x Rev 0.%d\n",
- CPU, bfin_cpuid(), bfin_revid());
- else {
+ if (likely(CPUID == bfin_cpuid())) {
if (bfin_revid() != bfin_compiled_revid()) {
if (bfin_compiled_revid() == -1)
printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n",
@@ -1157,16 +1199,25 @@
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
- "%d KB(L1 dcache%s) %d KB(L2 cache)\n",
- icache_size, dcache_size,
-#if defined CONFIG_BFIN_WB
- "-wb"
-#elif defined CONFIG_BFIN_WT
- "-wt"
-#endif
- "", 0);
-
+ "%d KB(L1 dcache) %d KB(L2 cache)\n",
+ icache_size, dcache_size, 0);
seq_printf(m, "%s\n", cache);
+ seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE)
+ "cacheable"
+#else
+ "uncacheable"
+#endif
+ " in instruction cache\n");
+ seq_printf(m, "external memory\t: "
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK)
+ "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_EXTMEM_WRITETHROUGH)
+ "cacheable (write-through)"
+#else
+ "uncacheable"
+#endif
+ " in data cache\n");
if (icache_size)
seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
@@ -1239,8 +1290,25 @@
if (cpu_num != num_possible_cpus() - 1)
return 0;
- if (L2_LENGTH)
+ if (L2_LENGTH) {
seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
+ seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_ICACHEABLE)
+ "cacheable"
+#else
+ "uncacheable"
+#endif
+ " in instruction cache\n");
+ seq_printf(m, "L2 SRAM\t\t: "
+#if defined(CONFIG_BFIN_L2_WRITEBACK)
+ "cacheable (write-back)"
+#elif defined(CONFIG_BFIN_L2_WRITETHROUGH)
+ "cacheable (write-through)"
+#else
+ "uncacheable"
+#endif
+ " in data cache\n");
+ }
seq_printf(m, "board name\t: %s\n", bfin_board_name);
seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
physical_mem_end >> 10, (void *)0, (void *)physical_mem_end);
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index d279552..8eeb457 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -37,6 +37,7 @@
#include <asm/traps.h>
#include <asm/cacheflush.h>
#include <asm/cplb.h>
+#include <asm/dma.h>
#include <asm/blackfin.h>
#include <asm/irq_handler.h>
#include <linux/irq.h>
@@ -636,57 +637,30 @@
*/
static bool get_instruction(unsigned short *val, unsigned short *address)
{
-
- unsigned long addr;
-
- addr = (unsigned long)address;
+ unsigned long addr = (unsigned long)address;
/* Check for odd addresses */
if (addr & 0x1)
return false;
- /* Check that things do not wrap around */
- if (addr > (addr + 2))
+ /* MMR region will never have instructions */
+ if (addr >= SYSMMR_BASE)
return false;
- /*
- * Since we are in exception context, we need to do a little address checking
- * We need to make sure we are only accessing valid memory, and
- * we don't read something in the async space that can hang forever
- */
- if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
-#if L2_LENGTH != 0
- (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
-#endif
- (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
-#if L1_DATA_A_LENGTH != 0
- (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) ||
-#endif
-#if L1_DATA_B_LENGTH != 0
- (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) ||
-#endif
- (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) ||
- (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) &&
- addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) ||
- (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) &&
- addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) ||
- (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) &&
- addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) ||
- (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) &&
- addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) {
- *val = *address;
- return true;
+ switch (bfin_mem_access_type(addr, 2)) {
+ case BFIN_MEM_ACCESS_CORE:
+ case BFIN_MEM_ACCESS_CORE_ONLY:
+ *val = *address;
+ return true;
+ case BFIN_MEM_ACCESS_DMA:
+ dma_memcpy(val, address, 2);
+ return true;
+ case BFIN_MEM_ACCESS_ITEST:
+ isram_memcpy(val, address, 2);
+ return true;
+ default: /* invalid access */
+ return false;
}
-
-#if L1_CODE_LENGTH != 0
- if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
- isram_memcpy(val, address, 2);
- return true;
- }
-#endif
-
-
- return false;
}
/*
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 1382f03..d979110 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -119,13 +119,19 @@
};
#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
-static struct dsa_platform_data ksz8893m_switch_data = {
+static struct dsa_chip_data ksz8893m_switch_chip_data = {
.mii_bus = &bfin_mii_bus.dev,
+ .port_names = {
+ NULL,
+ "eth%d",
+ "eth%d",
+ "cpu",
+ },
+};
+static struct dsa_platform_data ksz8893m_switch_data = {
+ .nr_chips = 1,
.netdev = &bfin_mac_device.dev,
- .port_names[0] = NULL,
- .port_names[1] = "eth%d",
- .port_names[2] = "eth%d",
- .port_names[3] = "cpu",
+ .chip = &ksz8893m_switch_chip_data,
};
static struct platform_device ksz8893m_switch_device = {
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index b69bd9a..426e064 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -7,7 +7,7 @@
*/
/* This file should be up to date with:
- * - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
+ * - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
*/
/* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */
@@ -18,7 +18,7 @@
#ifndef _MACH_ANOMALY_H_
#define _MACH_ANOMALY_H_
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
@@ -45,29 +45,31 @@
/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
#define ANOMALY_05000426 (1)
/* Software System Reset Corrupts PLL_LOCKCNT Register */
-#define ANOMALY_05000430 (1)
+#define ANOMALY_05000430 (__SILICON_REVISION__ < 1)
/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
#define ANOMALY_05000431 (1)
/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
-#define ANOMALY_05000435 (1)
+#define ANOMALY_05000435 (__SILICON_REVISION__ < 1)
/* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
-#define ANOMALY_05000438 (1)
+#define ANOMALY_05000438 (__SILICON_REVISION__ < 1)
/* Preboot Cannot be Used to Alter the PLL_DIV Register */
-#define ANOMALY_05000439 (1)
+#define ANOMALY_05000439 (__SILICON_REVISION__ < 1)
/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
-#define ANOMALY_05000440 (1)
+#define ANOMALY_05000440 (__SILICON_REVISION__ < 1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
/* Incorrect L1 Instruction Bank B Memory Map Location */
-#define ANOMALY_05000444 (1)
+#define ANOMALY_05000444 (__SILICON_REVISION__ < 1)
/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
-#define ANOMALY_05000452 (1)
+#define ANOMALY_05000452 (__SILICON_REVISION__ < 1)
/* PWM_TRIPB Signal Not Available on PG10 */
-#define ANOMALY_05000453 (1)
+#define ANOMALY_05000453 (__SILICON_REVISION__ < 1)
/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
-#define ANOMALY_05000455 (1)
-/* False Hardware Error when RETI points to invalid memory */
+#define ANOMALY_05000455 (__SILICON_REVISION__ < 1)
+/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
+#define ANOMALY_05000462 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
@@ -78,24 +80,30 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
#define ANOMALY_05000285 (0)
#define ANOMALY_05000287 (0)
#define ANOMALY_05000301 (0)
@@ -103,10 +111,13 @@
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000353 (0)
+#define ANOMALY_05000357 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
+#define ANOMALY_05000371 (0)
#define ANOMALY_05000380 (0)
#define ANOMALY_05000386 (0)
#define ANOMALY_05000389 (0)
@@ -117,5 +128,7 @@
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
#endif
diff --git a/arch/blackfin/mach-bf518/include/mach/blackfin.h b/arch/blackfin/mach-bf518/include/mach/blackfin.h
index 267bb7c..e8e14c2 100644
--- a/arch/blackfin/mach-bf518/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf518/include/mach/blackfin.h
@@ -33,7 +33,6 @@
#define _MACH_BLACKFIN_H_
#include "bf518.h"
-#include "mem_map.h"
#include "defBF512.h"
#include "anomaly.h"
diff --git a/arch/blackfin/mach-bf518/include/mach/mem_map.h b/arch/blackfin/mach-bf518/include/mach/mem_map.h
index 62bcc78..3c6777c 100644
--- a/arch/blackfin/mach-bf518/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf518/include/mach/mem_map.h
@@ -1,38 +1,16 @@
/*
- * file: include/asm-blackfin/mach-bf518/mem_map.h
- * based on: include/asm-blackfin/mach-bf527/mem_map.h
- * author: Bryan Wu <cooloney@kernel.org>
+ * BF51x memory map
*
- * created:
- * description:
- * Memory MAP Common header file for blackfin BF518/6/4/2 of processors.
- * rev:
- *
- * modified:
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
-#ifndef _MEM_MAP_518_H_
-#define _MEM_MAP_518_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
-#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
-#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
@@ -89,20 +67,4 @@
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE */
-/* Level 2 Memory - none */
-
-#define L2_START 0
-#define L2_LENGTH 0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START 0xFFB00000
-#define L1_SCRATCH_LENGTH 0x1000
-
-#define GET_PDA_SAFE(preg) \
- preg.l = _cpu_pda; \
- preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
-
-#endif /* _MEM_MAP_518_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 1eaf27f..f4867ce 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -78,7 +78,6 @@
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
- .port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 9f9c000..b2f30f0 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -237,10 +237,10 @@
.name = "m25p80",
.parts = bfin_spi_flash_partitions,
.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
- .type = "m25p16",
+ .type = "sst25wf040",
};
-/* SPI flash chip (m25p64) */
+/* SPI flash chip (sst25wf040) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
.bits_per_word = 8,
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 3e5b7db..799a1d1 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -77,7 +77,6 @@
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
- .port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index c84ddea..0d63f74 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -34,7 +34,7 @@
#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */
@@ -184,8 +184,12 @@
#define ANOMALY_05000456 (1)
/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
#define ANOMALY_05000457 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* USB Rx DMA hang */
+#define ANOMALY_05000465 (1)
+/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
+#define ANOMALY_05000467 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
@@ -195,24 +199,30 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
#define ANOMALY_05000285 (0)
#define ANOMALY_05000287 (0)
#define ANOMALY_05000301 (0)
@@ -220,6 +230,7 @@
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index 417abcd..03665a8 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -33,7 +33,6 @@
#define _MACH_BLACKFIN_H_
#include "bf527.h"
-#include "mem_map.h"
#include "defBF522.h"
#include "anomaly.h"
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
index 019e001..d96e894 100644
--- a/arch/blackfin/mach-bf527/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h
@@ -1,38 +1,16 @@
/*
- * file: include/asm-blackfin/mach-bf527/mem_map.h
- * based on: include/asm-blackfin/mach-bf537/mem_map.h
- * author: Michael Hennerich (michael.hennerich@analog.com)
+ * BF52x memory map
*
- * created:
- * description:
- * Memory MAP Common header file for blackfin BF527/5/2 of processors.
- * rev:
- *
- * modified:
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
-#ifndef _MEM_MAP_527_H_
-#define _MEM_MAP_527_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
-#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
-#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
@@ -89,20 +67,4 @@
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE */
-/* Level 2 Memory - none */
-
-#define L2_START 0
-#define L2_LENGTH 0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START 0xFFB00000
-#define L1_SCRATCH_LENGTH 0x1000
-
-#define GET_PDA_SAFE(preg) \
- preg.l = _cpu_pda; \
- preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
-
-#endif /* _MEM_MAP_527_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 89a5ec4..4e3e511 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -32,6 +32,7 @@
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
@@ -86,6 +87,101 @@
};
#endif
+#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
+static const char *map_probes[] = {
+ "stm_flash",
+ NULL,
+};
+
+static struct platdata_mtd_ram stm_pri_data_a = {
+ .mapname = "Flash A Primary",
+ .map_probes = map_probes,
+ .bankwidth = 2,
+};
+
+static struct resource stm_pri_resource_a = {
+ .start = 0x20000000,
+ .end = 0x200fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stm_pri_device_a = {
+ .name = "mtd-ram",
+ .id = 0,
+ .dev = {
+ .platform_data = &stm_pri_data_a,
+ },
+ .num_resources = 1,
+ .resource = &stm_pri_resource_a,
+};
+
+static struct platdata_mtd_ram stm_pri_data_b = {
+ .mapname = "Flash B Primary",
+ .map_probes = map_probes,
+ .bankwidth = 2,
+};
+
+static struct resource stm_pri_resource_b = {
+ .start = 0x20100000,
+ .end = 0x201fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device stm_pri_device_b = {
+ .name = "mtd-ram",
+ .id = 4,
+ .dev = {
+ .platform_data = &stm_pri_data_b,
+ },
+ .num_resources = 1,
+ .resource = &stm_pri_resource_b,
+};
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+static struct platdata_mtd_ram sram_data_a = {
+ .mapname = "Flash A SRAM",
+ .bankwidth = 2,
+};
+
+static struct resource sram_resource_a = {
+ .start = 0x20240000,
+ .end = 0x2024ffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_a = {
+ .name = "mtd-ram",
+ .id = 8,
+ .dev = {
+ .platform_data = &sram_data_a,
+ },
+ .num_resources = 1,
+ .resource = &sram_resource_a,
+};
+
+static struct platdata_mtd_ram sram_data_b = {
+ .mapname = "Flash B SRAM",
+ .bankwidth = 2,
+};
+
+static struct resource sram_resource_b = {
+ .start = 0x202c0000,
+ .end = 0x202cffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device sram_device_b = {
+ .name = "mtd-ram",
+ .id = 9,
+ .dev = {
+ .platform_data = &sram_data_b,
+ },
+ .num_resources = 1,
+ .resource = &sram_resource_b,
+};
+#endif
+
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@@ -357,6 +453,16 @@
&bfin_dpmc,
+#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
+ &stm_pri_device_a,
+ &stm_pri_device_b,
+#endif
+
+#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
+ &sram_device_a,
+ &sram_device_b,
+#endif
+
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device,
#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 31145b5..70a0ad6 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -34,7 +34,7 @@
# define ANOMALY_BF533 0
#endif
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
@@ -46,7 +46,7 @@
#define ANOMALY_05000122 (1)
/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */
#define ANOMALY_05000158 (__SILICON_REVISION__ < 5)
-/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
#define ANOMALY_05000166 (1)
/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
#define ANOMALY_05000167 (1)
@@ -56,13 +56,13 @@
#define ANOMALY_05000180 (1)
/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
#define ANOMALY_05000183 (__SILICON_REVISION__ < 4)
-/* False Protection Exceptions */
+/* False Protection Exceptions when Speculative Fetch Is Cancelled */
#define ANOMALY_05000189 (__SILICON_REVISION__ < 4)
/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */
#define ANOMALY_05000193 (__SILICON_REVISION__ < 4)
/* Restarting SPORT in Specific Modes May Cause Data Corruption */
#define ANOMALY_05000194 (__SILICON_REVISION__ < 4)
-/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+/* Failing MMR Accesses when Preceding Memory Read Stalls */
#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
/* Current DMA Address Shows Wrong Value During Carry Fix */
#define ANOMALY_05000199 (__SILICON_REVISION__ < 4)
@@ -74,7 +74,7 @@
#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
/* Specific Sequence That Can Cause DMA Error or DMA Stopping */
#define ANOMALY_05000203 (__SILICON_REVISION__ < 4)
-/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */
#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533)
/* Recovery from "Brown-Out" Condition */
#define ANOMALY_05000207 (__SILICON_REVISION__ < 4)
@@ -106,7 +106,7 @@
#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
-/* Data CPLBs Should Prevent Spurious Hardware Errors */
+/* Data CPLBs Should Prevent False Hardware Errors */
#define ANOMALY_05000246 (__SILICON_REVISION__ < 5)
/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
#define ANOMALY_05000250 (__SILICON_REVISION__ == 4)
@@ -148,21 +148,21 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
#define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
#define ANOMALY_05000283 (__SILICON_REVISION__ < 6)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
#define ANOMALY_05000288 (__SILICON_REVISION__ < 6)
/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
-/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
+/* ALT_TIMING Bit in PPI_CONTROL Register Is Not Functional */
#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (1) /* note: brokenness is noted in documentation, not anomaly sheet */
@@ -170,11 +170,11 @@
#define ANOMALY_05000310 (1)
/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
#define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
#define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
#define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
#define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6)
@@ -200,7 +200,7 @@
#define ANOMALY_05000426 (1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
/* These anomalies have been "phased" out of analog.com anomaly sheets and are
@@ -215,17 +215,17 @@
#define ANOMALY_05000070 (__SILICON_REVISION__ < 2)
/* Writing FIO_DIR can corrupt a programmable flag's data */
#define ANOMALY_05000079 (__SILICON_REVISION__ < 2)
-/* Timer Auto-Baud Mode requires the UART clock to be enabled */
+/* Timer Auto-Baud Mode requires the UART clock to be enabled. */
#define ANOMALY_05000086 (__SILICON_REVISION__ < 2)
/* Internal Clocking Modes on SPORT0 not supported */
#define ANOMALY_05000088 (__SILICON_REVISION__ < 2)
/* Internal voltage regulator does not wake up from an RTC wakeup */
#define ANOMALY_05000092 (__SILICON_REVISION__ < 2)
-/* The IFLUSH instruction must be preceded by a CSYNC instruction */
+/* The IFLUSH Instruction Must Be Preceded by a CSYNC Instruction */
#define ANOMALY_05000093 (__SILICON_REVISION__ < 2)
-/* Vectoring to an instruction that is presently being filled into the instruction cache may cause erroneous behavior */
+/* Vectoring to instruction that is being filled into the i-cache may cause erroneous behavior */
#define ANOMALY_05000095 (__SILICON_REVISION__ < 2)
-/* PREFETCH, FLUSH, and FLUSHINV must be followed by a CSYNC */
+/* PREFETCH, FLUSH, and FLUSHINV Instructions Must Be Followed by a CSYNC Instruction */
#define ANOMALY_05000096 (__SILICON_REVISION__ < 2)
/* Performance Monitor 0 and 1 are swapped when monitoring memory events */
#define ANOMALY_05000097 (__SILICON_REVISION__ < 2)
@@ -235,45 +235,45 @@
#define ANOMALY_05000100 (__SILICON_REVISION__ < 2)
/* Reading X_MODIFY or Y_MODIFY while DMA channel is active */
#define ANOMALY_05000101 (__SILICON_REVISION__ < 2)
-/* Descriptor-based MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
+/* Descriptor MemDMA may lock up with 32-bit transfers or if transfers span 64KB buffers */
#define ANOMALY_05000102 (__SILICON_REVISION__ < 2)
-/* Incorrect value written to the cycle counters */
+/* Incorrect Value Written to the Cycle Counters */
#define ANOMALY_05000103 (__SILICON_REVISION__ < 2)
-/* Stores to L1 Data memory incorrect when a specific sequence is followed */
+/* Stores to L1 Data Memory Incorrect when a Specific Sequence Is Followed */
#define ANOMALY_05000104 (__SILICON_REVISION__ < 2)
/* Programmable Flag (PF3) functionality not supported in all PPI modes */
#define ANOMALY_05000106 (__SILICON_REVISION__ < 2)
/* Data store can be lost when targeting a cache line fill */
#define ANOMALY_05000107 (__SILICON_REVISION__ < 2)
-/* Reserved bits in SYSCFG register not set at power on */
+/* Reserved Bits in SYSCFG Register Not Set at Power-On */
#define ANOMALY_05000109 (__SILICON_REVISION__ < 3)
/* Infinite Core Stall */
#define ANOMALY_05000114 (__SILICON_REVISION__ < 2)
-/* PPI_FSx may glitch when generated by the on chip Timers */
+/* PPI_FSx may glitch when generated by the on chip Timers. */
#define ANOMALY_05000115 (__SILICON_REVISION__ < 2)
-/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
+/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */
#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
/* DTEST registers allow access to Data Cache when DTEST_COMMAND< 14 >= 0 */
#define ANOMALY_05000117 (__SILICON_REVISION__ < 2)
/* Booting from an 8-bit or 24-bit Addressable SPI device is not supported */
#define ANOMALY_05000118 (__SILICON_REVISION__ < 2)
-/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */
+/* DTEST_COMMAND Initiated Memory Access May Be Incorrect If Data Cache or DMA Is Active */
#define ANOMALY_05000123 (__SILICON_REVISION__ < 3)
/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
#define ANOMALY_05000124 (__SILICON_REVISION__ < 3)
-/* Erroneous exception when enabling cache */
+/* Erroneous Exception when Enabling Cache */
#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
/* SPI clock polarity and phase bits incorrect during booting */
#define ANOMALY_05000126 (__SILICON_REVISION__ < 3)
-/* DMEM_CONTROL is not set on Reset */
+/* DMEM_CONTROL<12> Is Not Set on Reset */
#define ANOMALY_05000137 (__SILICON_REVISION__ < 3)
/* SPI boot will not complete if there is a zero fill block in the loader file */
#define ANOMALY_05000138 (__SILICON_REVISION__ == 2)
-/* Timerx_Config must be set for using the PPI in GP output mode with internal Frame Syncs */
+/* TIMERx_CONFIG[5] must be set for PPI in GP output mode with internal Frame Syncs */
#define ANOMALY_05000139 (__SILICON_REVISION__ < 2)
/* Allowing the SPORT RX FIFO to fill will cause an overflow */
#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
-/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
@@ -287,7 +287,7 @@
#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
-/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */
+/* When booting from 16-bit asynchronous memory, the upper 8 bits of each word must be 0x00 */
#define ANOMALY_05000148 (__SILICON_REVISION__ < 3)
/* Frame Delay in SPORT Multichannel Mode */
#define ANOMALY_05000153 (__SILICON_REVISION__ < 3)
@@ -295,13 +295,13 @@
#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */
#define ANOMALY_05000155 (__SILICON_REVISION__ < 3)
-/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
-/* SPORT transmit data is not gated by external frame sync in certain conditions */
+/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */
#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
-/* SDRAM auto-refresh and subsequent Power Ups */
+/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */
#define ANOMALY_05000168 (__SILICON_REVISION__ < 3)
-/* DATA CPLB page miss can result in lost write-through cache data writes */
+/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */
#define ANOMALY_05000169 (__SILICON_REVISION__ < 3)
/* DMA vs Core accesses to external memory */
#define ANOMALY_05000173 (__SILICON_REVISION__ < 3)
@@ -309,15 +309,15 @@
#define ANOMALY_05000174 (__SILICON_REVISION__ < 3)
/* Overlapping Sequencer and Memory Stalls */
#define ANOMALY_05000175 (__SILICON_REVISION__ < 3)
-/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */
#define ANOMALY_05000176 (__SILICON_REVISION__ < 3)
-/* Disabling the PPI resets the PPI configuration registers */
+/* Disabling the PPI Resets the PPI Configuration Registers */
#define ANOMALY_05000181 (__SILICON_REVISION__ < 3)
-/* PPI TX Mode with 2 External Frame Syncs */
+/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */
#define ANOMALY_05000185 (__SILICON_REVISION__ < 3)
/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
-/* In PPI Transmit Modes with External Frame Syncs POLC */
+/* In PPI Transmit Modes with External Frame Syncs POLC bit must be set to 1 */
#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
/* Internal Voltage Regulator may not start up */
#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
@@ -326,6 +326,7 @@
#define ANOMALY_05000120 (0)
#define ANOMALY_05000149 (0)
#define ANOMALY_05000171 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000266 (0)
@@ -345,5 +346,7 @@
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
index 045184f..39aa175 100644
--- a/arch/blackfin/mach-bf533/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf533/include/mach/blackfin.h
@@ -34,7 +34,6 @@
#define BF533_FAMILY
#include "bf533.h"
-#include "mem_map.h"
#include "defBF532.h"
#include "anomaly.h"
diff --git a/arch/blackfin/mach-bf533/include/mach/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h
index fc33b7c..197af1a 100644
--- a/arch/blackfin/mach-bf533/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf533/include/mach/mem_map.h
@@ -1,38 +1,16 @@
/*
- * File: include/asm-blackfin/mach-bf533/mem_map.h
- * Based on:
- * Author:
+ * BF533 memory map
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
-#ifndef _MEM_MAP_533_H_
-#define _MEM_MAP_533_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
-#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
-#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
@@ -158,20 +136,4 @@
#endif
-/* Level 2 Memory - none */
-
-#define L2_START 0
-#define L2_LENGTH 0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START 0xFFB00000
-#define L1_SCRATCH_LENGTH 0x1000
-
-#define GET_PDA_SAFE(preg) \
- preg.l = _cpu_pda; \
- preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
-
-#endif /* _MEM_MAP_533_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index ff7228c..c1f76dd 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -79,7 +79,6 @@
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
- .port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index fc96634..57c128c 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -34,13 +34,13 @@
# define ANOMALY_BF537 0
#endif
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
-/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
#define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
#define ANOMALY_05000180 (1)
@@ -50,11 +50,11 @@
#define ANOMALY_05000244 (__SILICON_REVISION__ < 3)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
-/* CLKIN Buffer Output Enable Reset Behavior Is Changed */
+/* Buffered CLKIN Output Is Disabled by Default */
#define ANOMALY_05000247 (1)
/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
#define ANOMALY_05000250 (__SILICON_REVISION__ < 3)
-/* EMAC Tx DMA error after an early frame abort */
+/* EMAC TX DMA Error After an Early Frame Abort */
#define ANOMALY_05000252 (__SILICON_REVISION__ < 3)
/* Maximum External Clock Speed for Timers */
#define ANOMALY_05000253 (__SILICON_REVISION__ < 3)
@@ -62,7 +62,7 @@
#define ANOMALY_05000254 (__SILICON_REVISION__ > 2)
/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */
#define ANOMALY_05000255 (__SILICON_REVISION__ < 3)
-/* EMAC MDIO input latched on wrong MDC edge */
+/* EMAC MDIO Input Latched on Wrong MDC Edge */
#define ANOMALY_05000256 (__SILICON_REVISION__ < 3)
/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */
#define ANOMALY_05000257 (__SILICON_REVISION__ < 3)
@@ -80,7 +80,7 @@
#define ANOMALY_05000264 (__SILICON_REVISION__ < 3)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
-/* Memory DMA error when peripheral DMA is running with non-zero DEB_TRAFFIC_PERIOD */
+/* Memory DMA Error when Peripheral DMA Is Running with Non-Zero DEB_TRAFFIC_PERIOD */
#define ANOMALY_05000268 (__SILICON_REVISION__ < 3)
/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
#define ANOMALY_05000270 (__SILICON_REVISION__ < 3)
@@ -92,15 +92,15 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (((ANOMALY_BF536 || ANOMALY_BF537) && __SILICON_REVISION__ < 3) || (ANOMALY_BF534 && __SILICON_REVISION__ < 2))
-/* SPI Master boot mode does not work well with Atmel Data flash devices */
+/* SPI Master Boot Mode Does Not Work Well with Atmel Data Flash Devices */
#define ANOMALY_05000280 (1)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 3)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
#define ANOMALY_05000282 (__SILICON_REVISION__ < 3)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
#define ANOMALY_05000283 (__SILICON_REVISION__ < 3)
-/* New Feature: EMAC TX DMA Word Alignment (Not Available On Older Silicon) */
+/* TXDWA Bit in EMAC_SYSCTL Register Is Not Functional */
#define ANOMALY_05000285 (__SILICON_REVISION__ < 3)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
#define ANOMALY_05000288 (__SILICON_REVISION__ < 3)
@@ -112,25 +112,25 @@
#define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
/* SCKELOW Bit Does Not Maintain State Through Hibernate */
#define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
-/* Writing UART_THR while UART clock is disabled sends erroneous start bit */
+/* Writing UART_THR While UART Clock Is Disabled Sends Erroneous Start Bit */
#define ANOMALY_05000309 (__SILICON_REVISION__ < 3)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (1)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
#define ANOMALY_05000313 (1)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
#define ANOMALY_05000315 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode: collisions occur in Full Duplex mode */
+/* EMAC RMII Mode: Collisions Occur in Full Duplex Mode */
#define ANOMALY_05000316 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode: TX frames in half duplex fail with status No Carrier */
+/* EMAC RMII Mode: TX Frames in Half Duplex Fail with Status "No Carrier" */
#define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
-/* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
+/* EMAC RMII Mode at 10-Base-T Speed: RX Frames Not Received Properly */
#define ANOMALY_05000322 (1)
/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot */
+/* UART Gets Disabled after UART Boot */
#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
#define ANOMALY_05000355 (1)
@@ -154,7 +154,7 @@
#define ANOMALY_05000426 (1)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
/* Anomalies that don't exist on this proc */
@@ -165,14 +165,17 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000266 (0)
@@ -195,5 +198,7 @@
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
#endif
diff --git a/arch/blackfin/mach-bf537/include/mach/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
index 7d6069c..f5e5015 100644
--- a/arch/blackfin/mach-bf537/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf537/include/mach/blackfin.h
@@ -35,7 +35,6 @@
#define BF537_FAMILY
#include "bf537.h"
-#include "mem_map.h"
#include "defBF534.h"
#include "anomaly.h"
diff --git a/arch/blackfin/mach-bf537/include/mach/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h
index f9010c4..942f08d 100644
--- a/arch/blackfin/mach-bf537/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf537/include/mach/mem_map.h
@@ -1,38 +1,16 @@
/*
- * file: include/asm-blackfin/mach-bf537/mem_map.h
- * based on:
- * author:
+ * BF537 memory map
*
- * created:
- * description:
- * Memory MAP Common header file for blackfin BF537/6/4 of processors.
- * rev:
- *
- * modified:
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
-#ifndef _MEM_MAP_537_H_
-#define _MEM_MAP_537_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
-#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
-#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
@@ -166,20 +144,4 @@
#endif
-/* Level 2 Memory - none */
-
-#define L2_START 0
-#define L2_LENGTH 0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START 0xFFB00000
-#define L1_SCRATCH_LENGTH 0x1000
-
-#define GET_PDA_SAFE(preg) \
- preg.l = _cpu_pda; \
- preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
-
-#endif /* _MEM_MAP_537_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index 175ca9e..c97acdf 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -30,13 +30,13 @@
# define ANOMALY_BF539 0
#endif
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
-/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
#define ANOMALY_05000166 (1)
/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
#define ANOMALY_05000179 (1)
@@ -70,11 +70,11 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 4)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (__SILICON_REVISION__ < 4)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 4)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
#define ANOMALY_05000282 (__SILICON_REVISION__ < 4)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
#define ANOMALY_05000283 (__SILICON_REVISION__ < 4)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
#define ANOMALY_05000288 (__SILICON_REVISION__ < 4)
@@ -92,11 +92,11 @@
#define ANOMALY_05000307 (__SILICON_REVISION__ < 4)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (__SILICON_REVISION__ < 5)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
#define ANOMALY_05000313 (__SILICON_REVISION__ < 4)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
#define ANOMALY_05000315 (__SILICON_REVISION__ < 4)
/* PFx Glitch on Write to FIO_FLAG_D or FIO_FLAG_T */
#define ANOMALY_05000318 (ANOMALY_BF539 && __SILICON_REVISION__ < 4)
@@ -110,7 +110,7 @@
#define ANOMALY_05000371 (__SILICON_REVISION__ < 5)
/* Entering Hibernate State with Peripheral Wakeups Enabled Draws Excess Current */
#define ANOMALY_05000374 (__SILICON_REVISION__ == 4)
-/* New Feature: Open-Drain GPIO Outputs on PC1 and PC4 (Not Available on Older Silicon) */
+/* GPIO Pins PC1 and PC4 Can Function as Normal Outputs */
#define ANOMALY_05000375 (__SILICON_REVISION__ < 4)
/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
#define ANOMALY_05000402 (__SILICON_REVISION__ < 4)
@@ -126,26 +126,32 @@
#define ANOMALY_05000436 (__SILICON_REVISION__ > 3)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
#define ANOMALY_05000120 (0)
+#define ANOMALY_05000125 (0)
#define ANOMALY_05000149 (0)
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000250 (0)
#define ANOMALY_05000254 (0)
+#define ANOMALY_05000257 (0)
#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000287 (0)
#define ANOMALY_05000305 (0)
@@ -166,5 +172,7 @@
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
#endif
diff --git a/arch/blackfin/mach-bf538/include/mach/blackfin.h b/arch/blackfin/mach-bf538/include/mach/blackfin.h
index 6f62835..9496196 100644
--- a/arch/blackfin/mach-bf538/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf538/include/mach/blackfin.h
@@ -35,7 +35,6 @@
#define BF538_FAMILY
#include "bf538.h"
-#include "mem_map.h"
#include "defBF539.h"
#include "anomaly.h"
diff --git a/arch/blackfin/mach-bf538/include/mach/mem_map.h b/arch/blackfin/mach-bf538/include/mach/mem_map.h
index 7681196..aff00f4 100644
--- a/arch/blackfin/mach-bf538/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf538/include/mach/mem_map.h
@@ -1,38 +1,16 @@
/*
- * File: include/asm-blackfin/mach-bf538/mem_map.h
- * Based on:
- * Author:
+ * BF538 memory map
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
-#ifndef _MEM_MAP_538_H_
-#define _MEM_MAP_538_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
-#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
-#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
@@ -93,21 +71,4 @@
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE*/
-
-/* Level 2 Memory - none */
-
-#define L2_START 0
-#define L2_LENGTH 0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START 0xFFB00000
-#define L1_SCRATCH_LENGTH 0x1000
-
-#define GET_PDA_SAFE(preg) \
- preg.l = _cpu_pda; \
- preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
-
-#endif /* _MEM_MAP_538_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 805a57b..81f5b95 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -76,7 +76,6 @@
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
- .port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index c510ae6..18a4cd24 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -18,7 +18,7 @@
# error will not work on BF548 silicon version 0.0, or 0.1
#endif
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1)
@@ -30,17 +30,17 @@
#define ANOMALY_05000265 (1)
/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
#define ANOMALY_05000272 (1)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 1)
/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
#define ANOMALY_05000304 (__SILICON_REVISION__ < 1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (__SILICON_REVISION__ < 1)
/* TWI Slave Boot Mode Is Not Functional */
#define ANOMALY_05000324 (__SILICON_REVISION__ < 1)
-/* External FIFO Boot Mode Is Not Functional */
+/* FIFO Boot Mode Not Functional */
#define ANOMALY_05000325 (__SILICON_REVISION__ < 2)
/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
#define ANOMALY_05000327 (__SILICON_REVISION__ < 1)
@@ -178,8 +178,12 @@
#define ANOMALY_05000450 (1)
/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
#define ANOMALY_05000456 (__SILICON_REVISION__ < 3)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* USB Rx DMA hang */
+#define ANOMALY_05000465 (1)
+/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
+#define ANOMALY_05000467 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
@@ -189,30 +193,36 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000250 (0)
#define ANOMALY_05000254 (0)
+#define ANOMALY_05000257 (0)
#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
+#define ANOMALY_05000283 (0)
#define ANOMALY_05000287 (0)
#define ANOMALY_05000301 (0)
#define ANOMALY_05000305 (0)
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
+#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
index cf6c150..6b97396 100644
--- a/arch/blackfin/mach-bf548/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf548/include/mach/blackfin.h
@@ -33,7 +33,6 @@
#define _MACH_BLACKFIN_H_
#include "bf548.h"
-#include "mem_map.h"
#include "anomaly.h"
#ifdef CONFIG_BF542
diff --git a/arch/blackfin/mach-bf548/include/mach/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h
index 70b9c11..caac2df 100644
--- a/arch/blackfin/mach-bf548/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf548/include/mach/mem_map.h
@@ -1,38 +1,16 @@
/*
- * file: include/asm-blackfin/mach-bf548/mem_map.h
- * based on:
- * author:
+ * BF548 memory map
*
- * created:
- * description:
- * Memory MAP Common header file for blackfin BF537/6/4 of processors.
- * rev:
- *
- * modified:
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
-#ifndef _MEM_MAP_548_H_
-#define _MEM_MAP_548_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
-#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
-#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */
@@ -103,15 +81,4 @@
# define L2_LENGTH 0x20000
#endif
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START 0xFFB00000
-#define L1_SCRATCH_LENGTH 0x1000
-
-#define GET_PDA_SAFE(preg) \
- preg.l = _cpu_pda; \
- preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
-
-#endif/* _MEM_MAP_548_H_ */
+#endif
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index b5ef7ff..4df904f 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -62,7 +62,6 @@
static struct isp1760_platform_data isp1760_priv = {
.is_isp1761 = 0,
- .port1_disable = 0,
.bus_width_16 = 1,
.port1_otg = 0,
.analog_oc = 0,
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index dccd396..94b8e27 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -18,19 +18,19 @@
# error will not work on BF561 silicon version 0.0, 0.1, 0.2, or 0.4
#endif
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */
#define ANOMALY_05000099 (__SILICON_REVISION__ < 5)
-/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */
+/* Trace Buffers May Contain Errors in Emulation Mode and/or Exception, NMI, Reset Handlers */
#define ANOMALY_05000116 (__SILICON_REVISION__ < 3)
-/* Testset instructions restricted to 32-bit aligned memory locations */
+/* TESTSET Instructions Restricted to 32-Bit Aligned Memory Locations */
#define ANOMALY_05000120 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
-/* Erroneous exception when enabling cache */
+/* Erroneous Exception when Enabling Cache */
#define ANOMALY_05000125 (__SILICON_REVISION__ < 3)
-/* Signbits instruction not functional under certain conditions */
+/* SIGNBITS Instruction Not Functional under Certain Conditions */
#define ANOMALY_05000127 (1)
/* Two bits in the Watchpoint Status Register (WPSTAT) are swapped */
#define ANOMALY_05000134 (__SILICON_REVISION__ < 3)
@@ -40,7 +40,7 @@
#define ANOMALY_05000136 (__SILICON_REVISION__ < 3)
/* Allowing the SPORT RX FIFO to fill will cause an overflow */
#define ANOMALY_05000140 (__SILICON_REVISION__ < 3)
-/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */
+/* Infinite Stall may occur with a particular sequence of consecutive dual dag events */
#define ANOMALY_05000141 (__SILICON_REVISION__ < 3)
/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */
#define ANOMALY_05000142 (__SILICON_REVISION__ < 3)
@@ -52,7 +52,7 @@
#define ANOMALY_05000146 (__SILICON_REVISION__ < 3)
/* Source MDMA descriptor may stop with a DMA Error near beginning of descriptor fetch */
#define ANOMALY_05000147 (__SILICON_REVISION__ < 3)
-/* IMDMA S1/D1 channel may stall */
+/* IMDMA S1/D1 Channel May Stall */
#define ANOMALY_05000149 (1)
/* DMA engine may lose data due to incorrect handshaking */
#define ANOMALY_05000150 (__SILICON_REVISION__ < 3)
@@ -66,7 +66,7 @@
#define ANOMALY_05000154 (__SILICON_REVISION__ < 3)
/* Timers in PWM-Out Mode with PPI GP Receive (Input) Mode with 0 Frame Syncs */
#define ANOMALY_05000156 (__SILICON_REVISION__ < 4)
-/* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
+/* Killed 32-Bit MMR Write Leads to Next System MMR Access Thinking It Should Be 32-Bit */
#define ANOMALY_05000157 (__SILICON_REVISION__ < 3)
/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */
#define ANOMALY_05000159 (__SILICON_REVISION__ < 3)
@@ -76,17 +76,17 @@
#define ANOMALY_05000161 (__SILICON_REVISION__ < 3)
/* DMEM_CONTROL<12> is not set on Reset */
#define ANOMALY_05000162 (__SILICON_REVISION__ < 3)
-/* SPORT transmit data is not gated by external frame sync in certain conditions */
+/* SPORT Transmit Data Is Not Gated by External Frame Sync in Certain Conditions */
#define ANOMALY_05000163 (__SILICON_REVISION__ < 3)
-/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */
+/* PPI Data Lengths between 8 and 16 Do Not Zero Out Upper Bits */
#define ANOMALY_05000166 (1)
/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
#define ANOMALY_05000167 (1)
-/* SDRAM auto-refresh and subsequent Power Ups */
+/* Undefined Behavior when Power-Up Sequence Is Issued to SDRAM during Auto-Refresh */
#define ANOMALY_05000168 (__SILICON_REVISION__ < 5)
-/* DATA CPLB page miss can result in lost write-through cache data writes */
+/* DATA CPLB Page Miss Can Result in Lost Write-Through Data Cache Writes */
#define ANOMALY_05000169 (__SILICON_REVISION__ < 5)
-/* Boot-ROM code modifies SICA_IWRx wakeup registers */
+/* Boot-ROM Modifies SICA_IWRx Wakeup Registers */
#define ANOMALY_05000171 (__SILICON_REVISION__ < 5)
/* DSPID register values incorrect */
#define ANOMALY_05000172 (__SILICON_REVISION__ < 3)
@@ -96,29 +96,29 @@
#define ANOMALY_05000174 (__SILICON_REVISION__ < 5)
/* Overlapping Sequencer and Memory Stalls */
#define ANOMALY_05000175 (__SILICON_REVISION__ < 5)
-/* Multiplication of (-1) by (-1) followed by an accumulator saturation */
+/* Overflow Bit Asserted when Multiplication of -1 by -1 Followed by Accumulator Saturation */
#define ANOMALY_05000176 (__SILICON_REVISION__ < 5)
/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */
#define ANOMALY_05000179 (__SILICON_REVISION__ < 5)
/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */
#define ANOMALY_05000180 (1)
-/* Disabling the PPI resets the PPI configuration registers */
+/* Disabling the PPI Resets the PPI Configuration Registers */
#define ANOMALY_05000181 (__SILICON_REVISION__ < 5)
-/* IMDMA does not operate to full speed for 600MHz and higher devices */
+/* Internal Memory DMA Does Not Operate at Full Speed */
#define ANOMALY_05000182 (1)
-/* Timer Pin limitations for PPI TX Modes with External Frame Syncs */
+/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */
#define ANOMALY_05000184 (__SILICON_REVISION__ < 5)
-/* PPI TX Mode with 2 External Frame Syncs */
+/* Early PPI Transmit when FS1 Asserts before FS2 in TX Mode with 2 External Frame Syncs */
#define ANOMALY_05000185 (__SILICON_REVISION__ < 5)
-/* PPI packing with Data Length greater than 8 bits (not a meaningful mode) */
+/* Upper PPI Pins Driven when PPI Packing Enabled and Data Length >8 Bits */
#define ANOMALY_05000186 (__SILICON_REVISION__ < 5)
/* IMDMA Corrupted Data after a Halt */
#define ANOMALY_05000187 (1)
/* IMDMA Restrictions on Descriptor and Buffer Placement in Memory */
#define ANOMALY_05000188 (__SILICON_REVISION__ < 5)
-/* False Protection Exceptions */
+/* False Protection Exceptions when Speculative Fetch Is Cancelled */
#define ANOMALY_05000189 (__SILICON_REVISION__ < 5)
-/* PPI not functional at core voltage < 1Volt */
+/* PPI Not Functional at Core Voltage < 1Volt */
#define ANOMALY_05000190 (1)
/* PPI does not invert the Driving PPICLK edge in Transmit Modes */
#define ANOMALY_05000191 (__SILICON_REVISION__ < 3)
@@ -126,7 +126,7 @@
#define ANOMALY_05000193 (__SILICON_REVISION__ < 5)
/* Restarting SPORT in Specific Modes May Cause Data Corruption */
#define ANOMALY_05000194 (__SILICON_REVISION__ < 5)
-/* Failing MMR Accesses When Stalled by Preceding Memory Read */
+/* Failing MMR Accesses when Preceding Memory Read Stalls */
#define ANOMALY_05000198 (__SILICON_REVISION__ < 5)
/* Current DMA Address Shows Wrong Value During Carry Fix */
#define ANOMALY_05000199 (__SILICON_REVISION__ < 5)
@@ -134,9 +134,9 @@
#define ANOMALY_05000200 (__SILICON_REVISION__ < 5)
/* Possible Infinite Stall with Specific Dual-DAG Situation */
#define ANOMALY_05000202 (__SILICON_REVISION__ < 5)
-/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */
+/* Incorrect Data Read with Writethrough "Allocate Cache Lines on Reads Only" Cache Mode */
#define ANOMALY_05000204 (__SILICON_REVISION__ < 5)
-/* Specific sequence that can cause DMA error or DMA stopping */
+/* Specific Sequence that Can Cause DMA Error or DMA Stopping */
#define ANOMALY_05000205 (__SILICON_REVISION__ < 5)
/* Recovery from "Brown-Out" Condition */
#define ANOMALY_05000207 (__SILICON_REVISION__ < 5)
@@ -158,7 +158,7 @@
#define ANOMALY_05000230 (__SILICON_REVISION__ < 5)
/* UART STB Bit Incorrectly Affects Receiver Setting */
#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
-/* SPORT data transmit lines are incorrectly driven in multichannel mode */
+/* SPORT Data Transmit Lines Are Incorrectly Driven in Multichannel Mode */
#define ANOMALY_05000232 (__SILICON_REVISION__ < 5)
/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
@@ -166,7 +166,7 @@
#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (__SILICON_REVISION__ < 5)
-/* TESTSET operation forces stall on the other core */
+/* TESTSET Operation Forces Stall on the Other Core */
#define ANOMALY_05000248 (__SILICON_REVISION__ < 5)
/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */
#define ANOMALY_05000250 (__SILICON_REVISION__ > 2 && __SILICON_REVISION__ < 5)
@@ -192,9 +192,9 @@
#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
-/* IMDMA destination IRQ status must be read prior to using IMDMA */
+/* IMDMA Destination IRQ Status Must Be Read Prior to Using IMDMA */
#define ANOMALY_05000266 (__SILICON_REVISION__ > 3)
-/* IMDMA may corrupt data under certain conditions */
+/* IMDMA May Corrupt Data under Certain Conditions */
#define ANOMALY_05000267 (1)
/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
#define ANOMALY_05000269 (1)
@@ -202,7 +202,7 @@
#define ANOMALY_05000270 (1)
/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
#define ANOMALY_05000272 (1)
-/* Data cache write back to external synchronous memory may be lost */
+/* Data Cache Write Back to External Synchronous Memory May Be Lost */
#define ANOMALY_05000274 (1)
/* PPI Timing and Sampling Information Updates */
#define ANOMALY_05000275 (__SILICON_REVISION__ > 2)
@@ -212,17 +212,17 @@
#define ANOMALY_05000277 (__SILICON_REVISION__ < 3)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
#define ANOMALY_05000278 (__SILICON_REVISION__ < 5)
-/* False Hardware Error Exception When ISR Context Is Not Restored */
+/* False Hardware Error Exception when ISR Context Is Not Restored */
#define ANOMALY_05000281 (__SILICON_REVISION__ < 5)
-/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
+/* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */
#define ANOMALY_05000283 (1)
-/* A read will receive incorrect data under certain conditions */
+/* Reads Will Receive Incorrect Data under Certain Conditions */
#define ANOMALY_05000287 (__SILICON_REVISION__ < 5)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
#define ANOMALY_05000288 (__SILICON_REVISION__ < 5)
/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
#define ANOMALY_05000301 (1)
-/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
+/* SSYNCs after Writes to DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (1)
/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
@@ -230,25 +230,25 @@
#define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
-/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
#define ANOMALY_05000312 (1)
/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
#define ANOMALY_05000313 (1)
-/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
+/* Killed System MMR Write Completes Erroneously on Next System MMR Access */
#define ANOMALY_05000315 (1)
-/* PF2 Output Remains Asserted After SPI Master Boot */
+/* PF2 Output Remains Asserted after SPI Master Boot */
#define ANOMALY_05000320 (__SILICON_REVISION__ > 3)
-/* Erroneous GPIO Flag Pin Operations Under Specific Sequences */
+/* Erroneous GPIO Flag Pin Operations under Specific Sequences */
#define ANOMALY_05000323 (1)
-/* SPORT Secondary Receive Channel Not Functional When Word Length Exceeds 16 Bits */
+/* SPORT Secondary Receive Channel Not Functional when Word Length >16 Bits */
#define ANOMALY_05000326 (__SILICON_REVISION__ > 3)
-/* New Feature: 24-Bit SPI Boot Mode Support (Not Available On Older Silicon) */
+/* 24-Bit SPI Boot Mode Is Not Functional */
#define ANOMALY_05000331 (__SILICON_REVISION__ < 5)
-/* New Feature: Slave SPI Boot Mode Supported (Not Available On Older Silicon) */
+/* Slave SPI Boot Mode Is Not Functional */
#define ANOMALY_05000332 (__SILICON_REVISION__ < 5)
-/* Flag Data Register Writes One SCLK Cycle After Edge Is Detected May Clear Interrupt Status */
+/* Flag Data Register Writes One SCLK Cycle after Edge Is Detected May Clear Interrupt Status */
#define ANOMALY_05000333 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available on Older Silicon) */
+/* ALT_TIMING Bit in PLL_CTL Register Is Not Functional */
#define ANOMALY_05000339 (__SILICON_REVISION__ < 5)
/* Memory DMA FIFO Causes Throughput Degradation on Writes to External Memory */
#define ANOMALY_05000343 (__SILICON_REVISION__ < 5)
@@ -276,7 +276,7 @@
#define ANOMALY_05000428 (__SILICON_REVISION__ > 3)
/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
#define ANOMALY_05000443 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
/* Anomalies that don't exist on this proc */
@@ -284,6 +284,7 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000183 (0)
#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000353 (1)
@@ -298,5 +299,7 @@
#define ANOMALY_05000448 (0)
#define ANOMALY_05000456 (0)
#define ANOMALY_05000450 (0)
+#define ANOMALY_05000465 (0)
+#define ANOMALY_05000467 (0)
#endif
diff --git a/arch/blackfin/mach-bf561/include/mach/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h
index f79f6626..8be3135 100644
--- a/arch/blackfin/mach-bf561/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf561/include/mach/blackfin.h
@@ -34,7 +34,6 @@
#define BF561_FAMILY
#include "bf561.h"
-#include "mem_map.h"
#include "defBF561.h"
#include "anomaly.h"
diff --git a/arch/blackfin/mach-bf561/include/mach/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
index 419dffd..a63e15c 100644
--- a/arch/blackfin/mach-bf561/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf561/include/mach/mem_map.h
@@ -1,13 +1,16 @@
/*
- * Memory MAP
- * Common header file for blackfin BF561 of processors.
+ * BF561 memory map
+ *
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
-#ifndef _MEM_MAP_561_H_
-#define _MEM_MAP_561_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
-#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
-#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */
@@ -82,9 +85,6 @@
#define COREA_L1_SCRATCH_START 0xFFB00000
#define COREB_L1_SCRATCH_START 0xFF700000
-#define L1_SCRATCH_START COREA_L1_SCRATCH_START
-#define L1_SCRATCH_LENGTH 0x1000
-
#ifdef __ASSEMBLY__
/*
@@ -155,14 +155,42 @@
dreg = ROT dreg BY -1; \
dreg = CC;
-#else
-#define GET_PDA_SAFE(preg) \
- preg.l = _cpu_pda; \
- preg.h = _cpu_pda;
+static inline unsigned long get_l1_scratch_start_cpu(int cpu)
+{
+ return cpu ? COREB_L1_SCRATCH_START : COREA_L1_SCRATCH_START;
+}
+static inline unsigned long get_l1_code_start_cpu(int cpu)
+{
+ return cpu ? COREB_L1_CODE_START : COREA_L1_CODE_START;
+}
+static inline unsigned long get_l1_data_a_start_cpu(int cpu)
+{
+ return cpu ? COREB_L1_DATA_A_START : COREA_L1_DATA_A_START;
+}
+static inline unsigned long get_l1_data_b_start_cpu(int cpu)
+{
+ return cpu ? COREB_L1_DATA_B_START : COREA_L1_DATA_B_START;
+}
-#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
+static inline unsigned long get_l1_scratch_start(void)
+{
+ return get_l1_scratch_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_code_start(void)
+{
+ return get_l1_code_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_data_a_start(void)
+{
+ return get_l1_data_a_start_cpu(blackfin_core_id());
+}
+static inline unsigned long get_l1_data_b_start(void)
+{
+ return get_l1_data_b_start_cpu(blackfin_core_id());
+}
+
#endif /* CONFIG_SMP */
#endif /* __ASSEMBLY__ */
-#endif /* _MEM_MAP_533_H_ */
+#endif
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index da93d92..5998d86 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -74,7 +74,7 @@
/* if 220 exists, can not set External Memory WB and L2 not_cached, either External Memory not_cached and L2 WB */
#if ANOMALY_05000220 && \
- ((defined(CONFIG_BFIN_WB) && defined(CONFIG_BFIN_L2_NOT_CACHED)) || \
- (!defined(CONFIG_BFIN_DCACHE) && defined(CONFIG_BFIN_L2_WB)))
+ ((defined(CONFIG_BFIN_EXTMEM_WRITEBACK) && !defined(CONFIG_BFIN_L2_DCACHEABLE)) || \
+ (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK)))
# error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB.
#endif
diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c
index 70e3411..85c6580 100644
--- a/arch/blackfin/mach-common/cpufreq.c
+++ b/arch/blackfin/mach-common/cpufreq.c
@@ -141,7 +141,7 @@
sclk = get_sclk() / 1000;
#if ANOMALY_05000273 || ANOMALY_05000274 || \
- (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_DCACHE))
+ (!defined(CONFIG_BF54x) && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
min_cclk = sclk * 2;
#else
min_cclk = sclk;
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 31fa313..5a4e7c7 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1609,6 +1609,7 @@
.long _sys_preadv
.long _sys_pwritev
.long _sys_rt_tgsigqueueinfo
+ .long _sys_perf_counter_open
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index af70f09..b421501 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -1052,35 +1052,34 @@
set_irq_chained_handler(irq, bfin_demux_error_irq);
break;
#endif
-#if defined(CONFIG_TICKSOURCE_GPTMR0)
- case IRQ_TIMER0:
- set_irq_handler(irq, handle_percpu_irq);
- break;
-#endif
#ifdef CONFIG_SMP
case IRQ_SUPPLE_0:
case IRQ_SUPPLE_1:
set_irq_handler(irq, handle_percpu_irq);
break;
#endif
- default:
#ifdef CONFIG_IPIPE
- /*
- * We want internal interrupt sources to be
- * masked, because ISRs may trigger interrupts
- * recursively (e.g. DMA), but interrupts are
- * _not_ masked at CPU level. So let's handle
- * most of them as level interrupts, except
- * the timer interrupt which is special.
- */
- if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
- set_irq_handler(irq, handle_simple_irq);
- else
- set_irq_handler(irq, handle_level_irq);
-#else /* !CONFIG_IPIPE */
+#ifndef CONFIG_TICKSOURCE_CORETMR
+ case IRQ_TIMER0:
set_irq_handler(irq, handle_simple_irq);
-#endif /* !CONFIG_IPIPE */
break;
+#endif /* !CONFIG_TICKSOURCE_CORETMR */
+ case IRQ_CORETMR:
+ set_irq_handler(irq, handle_simple_irq);
+ break;
+ default:
+ set_irq_handler(irq, handle_level_irq);
+ break;
+#else /* !CONFIG_IPIPE */
+#ifdef CONFIG_TICKSOURCE_GPTMR0
+ case IRQ_TIMER0:
+ set_irq_handler(irq, handle_percpu_irq);
+ break;
+#endif /* CONFIG_TICKSOURCE_GPTMR0 */
+ default:
+ set_irq_handler(irq, handle_simple_irq);
+ break;
+#endif /* !CONFIG_IPIPE */
}
}
@@ -1224,15 +1223,14 @@
asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
{
struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
- struct ipipe_domain *this_domain = ipipe_current_domain;
+ struct ipipe_domain *this_domain = __ipipe_current_domain;
struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
int irq, s;
- if (likely(vec == EVT_IVTMR_P)) {
+ if (likely(vec == EVT_IVTMR_P))
irq = IRQ_CORETMR;
-
- } else {
+ else {
#if defined(SIC_ISR0) || defined(SICA_ISR0)
unsigned long sic_status[3];
@@ -1262,12 +1260,11 @@
break;
}
#endif
-
irq = ivg->irqno;
}
if (irq == IRQ_SYSTMR) {
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
+#if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_TICKSOURCE_GPTMR0)
bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
#endif
/* This is basically what we need from the register frame. */
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index bce5a84..9e7e27b 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -132,7 +132,7 @@
return 0;
}
-#ifdef CONFIG_BFIN_WB
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
static void flushinv_all_dcache(void)
{
u32 way, bank, subbank, set;
@@ -175,7 +175,7 @@
#ifdef CONFIG_BFIN_DCACHE
unsigned long ctrl;
-#ifdef CONFIG_BFIN_WB
+#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
flushinv_all_dcache();
#endif
SSYNC();
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index 014a55a..68bd0bd6 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -160,7 +160,7 @@
/* do not count in kernel image between _rambase and _ramstart */
reservedpages -= (_ramstart - _rambase) >> PAGE_SHIFT;
-#if (defined(CONFIG_BFIN_ICACHE) && ANOMALY_05000263)
+#if (defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) && ANOMALY_05000263)
reservedpages += (_ramend - memory_end - DMA_UNCACHED_REGION) >> PAGE_SHIFT;
#endif