ASoC: Move WM5100 platform data based setup into I2C probe
Get things configured as early as possible, especially useful for the
GPIOs which might be useful anyway.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c
index 0077086..f37d67f 100644
--- a/sound/soc/codecs/wm5100.c
+++ b/sound/soc/codecs/wm5100.c
@@ -2467,24 +2467,6 @@
snd_soc_update_bits(codec, wm5100_dig_vu[i], WM5100_OUT_VU,
WM5100_OUT_VU);
- for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) {
- snd_soc_update_bits(codec, WM5100_IN1L_CONTROL,
- WM5100_IN1_MODE_MASK |
- WM5100_IN1_DMIC_SUP_MASK,
- (wm5100->pdata.in_mode[i] <<
- WM5100_IN1_MODE_SHIFT) |
- (wm5100->pdata.dmic_sup[i] <<
- WM5100_IN1_DMIC_SUP_SHIFT));
- }
-
- for (i = 0; i < ARRAY_SIZE(wm5100->pdata.gpio_defaults); i++) {
- if (!wm5100->pdata.gpio_defaults[i])
- continue;
-
- snd_soc_write(codec, WM5100_GPIO_CTRL_1 + i,
- wm5100->pdata.gpio_defaults[i]);
- }
-
/* Don't debounce interrupts to support use of SYSCLK only */
snd_soc_write(codec, WM5100_IRQ_DEBOUNCE_1, 0);
snd_soc_write(codec, WM5100_IRQ_DEBOUNCE_2, 0);
@@ -2739,6 +2721,24 @@
wm5100_init_gpio(i2c);
+ for (i = 0; i < ARRAY_SIZE(wm5100->pdata.gpio_defaults); i++) {
+ if (!wm5100->pdata.gpio_defaults[i])
+ continue;
+
+ regmap_write(wm5100->regmap, WM5100_GPIO_CTRL_1 + i,
+ wm5100->pdata.gpio_defaults[i]);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) {
+ regmap_update_bits(wm5100->regmap, WM5100_IN1L_CONTROL,
+ WM5100_IN1_MODE_MASK |
+ WM5100_IN1_DMIC_SUP_MASK,
+ (wm5100->pdata.in_mode[i] <<
+ WM5100_IN1_MODE_SHIFT) |
+ (wm5100->pdata.dmic_sup[i] <<
+ WM5100_IN1_DMIC_SUP_SHIFT));
+ }
+
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm5100, wm5100_dai,
ARRAY_SIZE(wm5100_dai));