802.11: clean up/fix HT support
This patch cleans up a number of things:
* the unusable definition of the HT capabilities/HT information
information elements
* variable names that are hard to understand
* mac80211: move ieee80211_handle_ht to ht.c and remove the unused
enable_ht parameter
* mac80211: fix bug with MCS rate 32 in ieee80211_handle_ht
* mac80211: fix bug with casting the result of ieee80211_bss_get_ie
to an information element _contents_ rather than the
whole element, add size checking (another out-of-bounds
access bug fixed!)
* mac80211: remove some unused return values in favour of BUG_ON
checking
* a few minor other things
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 186d75a..5e087c9 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -61,24 +61,24 @@
switch (chan->band) {
case IEEE80211_BAND_2GHZ:
- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) &&
+ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE) &&
(tx_chan_width == ATH9K_HT_MACMODE_20))
chanmode = CHANNEL_G_HT20;
- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) &&
+ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) &&
(tx_chan_width == ATH9K_HT_MACMODE_2040))
chanmode = CHANNEL_G_HT40PLUS;
- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) &&
+ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) &&
(tx_chan_width == ATH9K_HT_MACMODE_2040))
chanmode = CHANNEL_G_HT40MINUS;
break;
case IEEE80211_BAND_5GHZ:
- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE) &&
+ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE) &&
(tx_chan_width == ATH9K_HT_MACMODE_20))
chanmode = CHANNEL_A_HT20;
- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE) &&
+ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) &&
(tx_chan_width == ATH9K_HT_MACMODE_2040))
chanmode = CHANNEL_A_HT40PLUS;
- if ((ext_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW) &&
+ if ((ext_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) &&
(tx_chan_width == ATH9K_HT_MACMODE_2040))
chanmode = CHANNEL_A_HT40MINUS;
break;
@@ -215,24 +215,24 @@
ath_key_reset(sc, key->keyidx, freeslot);
}
-static void setup_ht_cap(struct ieee80211_ht_info *ht_info)
+static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info)
{
#define ATH9K_HT_CAP_MAXRXAMPDU_65536 0x3 /* 2 ^ 16 */
#define ATH9K_HT_CAP_MPDUDENSITY_8 0x6 /* 8 usec */
- ht_info->ht_supported = 1;
- ht_info->cap = (u16)IEEE80211_HT_CAP_SUP_WIDTH
- |(u16)IEEE80211_HT_CAP_SM_PS
- |(u16)IEEE80211_HT_CAP_SGI_40
- |(u16)IEEE80211_HT_CAP_DSSSCCK40;
+ ht_info->ht_supported = true;
+ ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+ IEEE80211_HT_CAP_SM_PS |
+ IEEE80211_HT_CAP_SGI_40 |
+ IEEE80211_HT_CAP_DSSSCCK40;
ht_info->ampdu_factor = ATH9K_HT_CAP_MAXRXAMPDU_65536;
ht_info->ampdu_density = ATH9K_HT_CAP_MPDUDENSITY_8;
- /* setup supported mcs set */
- memset(ht_info->supp_mcs_set, 0, 16);
- ht_info->supp_mcs_set[0] = 0xff;
- ht_info->supp_mcs_set[1] = 0xff;
- ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED;
+ /* set up supported mcs set */
+ memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
+ ht_info->mcs.rx_mask[0] = 0xff;
+ ht_info->mcs.rx_mask[1] = 0xff;
+ ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
}
static int ath_rate2idx(struct ath_softc *sc, int rate)
@@ -328,31 +328,28 @@
static void ath9k_ht_conf(struct ath_softc *sc,
struct ieee80211_bss_conf *bss_conf)
{
-#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14)
struct ath_ht_info *ht_info = &sc->sc_ht_info;
if (bss_conf->assoc_ht) {
ht_info->ext_chan_offset =
bss_conf->ht_bss_conf->bss_cap &
- IEEE80211_HT_IE_CHA_SEC_OFFSET;
+ IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
- if (!(bss_conf->ht_conf->cap &
+ if (!(bss_conf->ht_cap->cap &
IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
(bss_conf->ht_bss_conf->bss_cap &
- IEEE80211_HT_IE_CHA_WIDTH))
+ IEEE80211_HT_PARAM_CHAN_WIDTH_ANY))
ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040;
else
ht_info->tx_chan_width = ATH9K_HT_MACMODE_20;
ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width);
ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
- bss_conf->ht_conf->ampdu_factor);
+ bss_conf->ht_cap->ampdu_factor);
ht_info->mpdudensity =
- parse_mpdudensity(bss_conf->ht_conf->ampdu_density);
+ parse_mpdudensity(bss_conf->ht_cap->ampdu_density);
}
-
-#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT
}
static void ath9k_bss_assoc_info(struct ath_softc *sc,
@@ -411,7 +408,7 @@
return;
}
- if (hw->conf.ht_conf.ht_supported)
+ if (hw->conf.ht_cap.ht_supported)
sc->sc_ah->ah_channels[pos].chanmode =
ath_get_extchanmode(sc, curchan);
else
@@ -534,7 +531,7 @@
if (an) {
ath_rx_input(sc, an,
- hw->conf.ht_conf.ht_supported,
+ hw->conf.ht_cap.ht_supported,
skb, status, &st);
}
if (!an || (st != ATH_RX_CONSUMED))
@@ -943,7 +940,7 @@
if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
/* Setup HT capabilities for 2.4Ghz*/
- setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info);
+ setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&sc->sbands[IEEE80211_BAND_2GHZ];
@@ -958,7 +955,7 @@
if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT)
/* Setup HT capabilities for 5Ghz*/
- setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info);
+ setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&sc->sbands[IEEE80211_BAND_5GHZ];
@@ -1254,7 +1251,7 @@
(curchan->band == IEEE80211_BAND_2GHZ) ?
CHANNEL_G : CHANNEL_A;
- if (sc->sc_curaid && hw->conf.ht_conf.ht_supported)
+ if (sc->sc_curaid && hw->conf.ht_cap.ht_supported)
sc->sc_ah->ah_channels[pos].chanmode =
ath_get_extchanmode(sc, curchan);