network: wireless: bcm4329: Add bcm4329 driver
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Add "HANG" event and console monitoring
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Remove unnecessary set_freezable() calls
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Update to Version 4.218.238
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Fix MAC address import
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Fix wlan card removal
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Update to Version 4.218.239
Add reading mac address from platform data
Add dhd_os_proto_block protection for dhd_preinit_ioctls
Revert dhdsdio_clk() changes
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Add SoftAP MAC address randomization
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Add 2.6.35 compatibility and fix memory leak in set_multicast_list
Signed-off-by: Dmitry Shmidt <dimitrysh@android.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Reduce driver loading time
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Set special OUI: 02:1A:11:FH:HH:HH for SoftAP
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Fix BUS DOWN in IOCTL
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
network: wireless: bcm4329: Add driver SETSUSPEND command
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix packet filter to only filter out non-unicast frames
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Add wakelock processing in ioctl and messaging
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Update to 4.218.245 (combo scan)
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Update to Version 4.218.246 and setband fix
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Add wakelock processing to WEXT requests
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Force scan when driver is loaded
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix scan timeout for abg case
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix dhd_bus_watchdog() race conditions
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix unregister_early_suspend() in dhd_detach()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Add memory barriers to wait functions
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix "setsuspend" behavior
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Increase PMU_MAX_TRANSITION_DLY to 1 sec
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Turn OFF packet filtering during DHCP session
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Disable packet filtering
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Send "HANG" message only once
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Update to Version 4.218.248
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix HW_OOB interrupt processing
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix interrupt enabling for level interrupt
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Revert "net: wireless: bcm4329: Fix interrupt enabling for level interrupt"
This reverts commit 261d21bbfffef6261696d0d13672d2e4f9d76f05.
Revert "net: wireless: bcm4329: Fix HW_OOB interrupt processing"
This reverts commit 8bd035daa820dc5612ae311262c71dc133871046.
net: wireless: bcm4329: Fix HW_OOB interrupt processing
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix roaming failure case
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix roaming setting on resume
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Add debug print for cscan failure
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Ignore error if scan results are empty
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Enable packet filtering during low power mode
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Update to Version 4.218.248.6
Fix watchdog time rescheduling, fix first scan no-return
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix interrupt enabling in case of error
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix setting HT clock race conditions
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix setting HT clock race conditions in driver start
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Update to Version 4.218.248-10
Add KEEP_ALIVE feature, fix 'driver rssi' processing, fix roaming processing
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Improve BT-coex for eSCO
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix race conditions for sysioc_thread
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Update to version 4.218.248-11
Check for 'driver start' failure, Set keep-alive feature forever
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Check for out of bounds in scan results parsing
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Add check for out of bounds scan buffer
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Update to version 4.218.248-12
- Fix crash during Specific Scan handling
- Fix potential insmod crash by increase Registration Timeout to 12 sec
- Added max time restriction to PNO scan timer
- New IWPRIV "AP_STA_DISASSOC" to disassoc STAs in SoftAP mode
- Add new setting to SoftAP "AP_SET_CFG" to enable Hidden SSID
- Fixs bugs for SoftAP AP_SET_MAC_FLTR iwpriv commnd
- Add STAs rssi filed to SoftAP "AP_GET_STA_LIST" IWPRIV commnd
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix watchdog termination after 'driver stop'
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Enable KEEP_ALIVE feature
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Add FW Reload event processing
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix Softap start/stop race conditions
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Set first channel passive scan to 30 ms
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Update to Version 4.218.248-15
- Increase default Listen Interval to 20 Beacons
- Add logic to adjust SKIP_DTIM if Listen Interval < DTIM * DTIM_SKIP to
avoid data lost due to fact that packet maybe not retrieved during Listen
Interval and AP may toss it
- Fix problem with Hidden AP setting after AP reconfigure
- Add new SoftAP optional parameter as COUNTRY to pass country code to SoftAP
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Improve way to detect BT SCO connection for BT-coex
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Use non-DFS channels only for US
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Add 'setdfschannels' command
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix watchdog syncronization during start/stop
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix driver 'start' retry ability
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Fix memory leak in case of dhd_bus_init() failure
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Add CONFIG_FIRST_SCAN option
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Update to Version 4.218.248-17
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
net: wireless: bcm4329: Update to version 4.218.248-18
- Improve BT-coex to differentiate HID and SCO device during DHCP session
- Enforce DTIM=1 for any SoftAP settings to optimize internal memory logic
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index f354bd4..d57fee5 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -271,6 +271,7 @@
source "drivers/net/wireless/ath/Kconfig"
source "drivers/net/wireless/b43/Kconfig"
source "drivers/net/wireless/b43legacy/Kconfig"
+source "drivers/net/wireless/bcm4329/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/ipw2x00/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 7bba6a8..2e6bb5d 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -58,3 +58,5 @@
obj-$(CONFIG_IWM) += iwmc3200wifi/
obj-$(CONFIG_MWIFIEX) += mwifiex/
+
+obj-$(CONFIG_BCM4329) += bcm4329/
diff --git a/drivers/net/wireless/bcm4329/Kconfig b/drivers/net/wireless/bcm4329/Kconfig
new file mode 100644
index 0000000..ca5760d
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/Kconfig
@@ -0,0 +1,27 @@
+config BCM4329
+ tristate "Broadcom 4329 wireless cards support"
+ depends on MMC
+ select WIRELESS_EXT
+ select WEXT_PRIV
+ ---help---
+ This module adds support for wireless adapters based on
+ Broadcom 4329 chipset.
+
+ This driver uses the kernel's wireless extensions subsystem.
+
+ If you choose to build a module, it'll be called dhd. Say M if
+ unsure.
+
+config BCM4329_FW_PATH
+ depends on BCM4329
+ string "Firmware path"
+ default "/system/etc/firmware/fw_bcm4329.bin"
+ ---help---
+ Path to the firmware file.
+
+config BCM4329_NVRAM_PATH
+ depends on BCM4329
+ string "NVRAM path"
+ default "/proc/calibration"
+ ---help---
+ Path to the calibration file.
diff --git a/drivers/net/wireless/bcm4329/Makefile b/drivers/net/wireless/bcm4329/Makefile
new file mode 100644
index 0000000..f808fb2
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/Makefile
@@ -0,0 +1,21 @@
+# bcm4329
+DHDCFLAGS = -DLINUX -DBCMDRIVER -DBCMDONGLEHOST -DDHDTHREAD -DBCMWPA2 \
+ -DUNRELEASEDCHIP -Dlinux -DDHD_SDALIGN=64 -DMAX_HDR_READ=64 \
+ -DDHD_FIRSTREAD=64 -DDHD_GPL -DDHD_SCHED -DBDC -DTOE -DDHD_BCMEVENTS \
+ -DSHOW_EVENTS -DBCMSDIO -DDHD_GPL -DBCMLXSDMMC -DBCMPLATFORM_BUS \
+ -Wall -Wstrict-prototypes -Werror -DOOB_INTR_ONLY -DCUSTOMER_HW2 \
+ -DDHD_USE_STATIC_BUF -DMMC_SDIO_ABORT -DDHD_DEBUG_TRAP -DSOFTAP \
+ -DEMBEDDED_PLATFORM -DARP_OFFLOAD_SUPPORT -DPKT_FILTER_SUPPORT \
+ -DGET_CUSTOM_MAC_ENABLE -DSET_RANDOM_MAC_SOFTAP -DCSCAN -DHW_OOB \
+ -DKEEP_ALIVE -DCONFIG_US_NON_DFS_CHANNELS_ONLY \
+ -Idrivers/net/wireless/bcm4329 -Idrivers/net/wireless/bcm4329/include
+
+DHDOFILES = dhd_linux.o linux_osl.o bcmutils.o dhd_common.o dhd_custom_gpio.o \
+ wl_iw.o siutils.o sbutils.o aiutils.o hndpmu.o bcmwifi.o dhd_sdio.o \
+ dhd_linux_sched.o dhd_cdc.o bcmsdh_sdmmc.o bcmsdh.o bcmsdh_linux.o \
+ bcmsdh_sdmmc_linux.o
+
+obj-$(CONFIG_BCM4329) += bcm4329.o
+bcm4329-objs += $(DHDOFILES)
+EXTRA_CFLAGS = $(DHDCFLAGS)
+EXTRA_LDFLAGS += --strip-debug
diff --git a/drivers/net/wireless/bcm4329/aiutils.c b/drivers/net/wireless/bcm4329/aiutils.c
new file mode 100644
index 0000000..df48ac0
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/aiutils.c
@@ -0,0 +1,686 @@
+/*
+ * Misc utility routines for accessing chip-specific features
+ * of the SiliconBackplane-based Broadcom chips.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: aiutils.c,v 1.6.4.7.4.6 2010/04/21 20:43:47 Exp $
+ */
+
+#include <typedefs.h>
+#include <bcmdefs.h>
+#include <osl.h>
+#include <bcmutils.h>
+#include <siutils.h>
+#include <hndsoc.h>
+#include <sbchipc.h>
+#include <pcicfg.h>
+
+#include "siutils_priv.h"
+
+STATIC uint32
+get_asd(si_t *sih, uint32 *eromptr, uint sp, uint ad, uint st,
+ uint32 *addrl, uint32 *addrh, uint32 *sizel, uint32 *sizeh);
+
+
+/* EROM parsing */
+
+static uint32
+get_erom_ent(si_t *sih, uint32 *eromptr, uint32 mask, uint32 match)
+{
+ uint32 ent;
+ uint inv = 0, nom = 0;
+
+ while (TRUE) {
+ ent = R_REG(si_osh(sih), (uint32 *)(uintptr)(*eromptr));
+ *eromptr += sizeof(uint32);
+
+ if (mask == 0)
+ break;
+
+ if ((ent & ER_VALID) == 0) {
+ inv++;
+ continue;
+ }
+
+ if (ent == (ER_END | ER_VALID))
+ break;
+
+ if ((ent & mask) == match)
+ break;
+
+ nom++;
+ }
+
+ SI_MSG(("%s: Returning ent 0x%08x\n", __FUNCTION__, ent));
+ if (inv + nom)
+ SI_MSG((" after %d invalid and %d non-matching entries\n", inv, nom));
+ return ent;
+}
+
+STATIC uint32
+get_asd(si_t *sih, uint32 *eromptr, uint sp, uint ad, uint st,
+ uint32 *addrl, uint32 *addrh, uint32 *sizel, uint32 *sizeh)
+{
+ uint32 asd, sz, szd;
+
+ asd = get_erom_ent(sih, eromptr, ER_VALID, ER_VALID);
+ if (((asd & ER_TAG1) != ER_ADD) ||
+ (((asd & AD_SP_MASK) >> AD_SP_SHIFT) != sp) ||
+ ((asd & AD_ST_MASK) != st)) {
+ /* This is not what we want, "push" it back */
+ *eromptr -= sizeof(uint32);
+ return 0;
+ }
+ *addrl = asd & AD_ADDR_MASK;
+ if (asd & AD_AG32)
+ *addrh = get_erom_ent(sih, eromptr, 0, 0);
+ else
+ *addrh = 0;
+ *sizeh = 0;
+ sz = asd & AD_SZ_MASK;
+ if (sz == AD_SZ_SZD) {
+ szd = get_erom_ent(sih, eromptr, 0, 0);
+ *sizel = szd & SD_SZ_MASK;
+ if (szd & SD_SG32)
+ *sizeh = get_erom_ent(sih, eromptr, 0, 0);
+ } else
+ *sizel = AD_SZ_BASE << (sz >> AD_SZ_SHIFT);
+
+ SI_MSG((" SP %d, ad %d: st = %d, 0x%08x_0x%08x @ 0x%08x_0x%08x\n",
+ sp, ad, st, *sizeh, *sizel, *addrh, *addrl));
+
+ return asd;
+}
+
+/* parse the enumeration rom to identify all cores */
+void
+ai_scan(si_t *sih, void *regs, uint devid)
+{
+ si_info_t *sii = SI_INFO(sih);
+ chipcregs_t *cc = (chipcregs_t *)regs;
+ uint32 erombase, eromptr, eromlim;
+
+ erombase = R_REG(sii->osh, &cc->eromptr);
+
+ switch (BUSTYPE(sih->bustype)) {
+ case SI_BUS:
+ eromptr = (uintptr)REG_MAP(erombase, SI_CORE_SIZE);
+ break;
+
+ case PCI_BUS:
+ /* Set wrappers address */
+ sii->curwrap = (void *)((uintptr)regs + SI_CORE_SIZE);
+
+ /* Now point the window at the erom */
+ OSL_PCI_WRITE_CONFIG(sii->osh, PCI_BAR0_WIN, 4, erombase);
+ eromptr = (uint32)(uintptr)regs;
+ break;
+
+ case SPI_BUS:
+ case SDIO_BUS:
+ eromptr = erombase;
+ break;
+
+ case PCMCIA_BUS:
+ default:
+ SI_ERROR(("Don't know how to do AXI enumertion on bus %d\n", sih->bustype));
+ ASSERT(0);
+ return;
+ }
+ eromlim = eromptr + ER_REMAPCONTROL;
+
+ SI_MSG(("ai_scan: regs = 0x%p, erombase = 0x%08x, eromptr = 0x%08x, eromlim = 0x%08x\n",
+ regs, erombase, eromptr, eromlim));
+ while (eromptr < eromlim) {
+ uint32 cia, cib, base, cid, mfg, crev, nmw, nsw, nmp, nsp;
+ uint32 mpd, asd, addrl, addrh, sizel, sizeh;
+ uint i, j, idx;
+ bool br;
+
+ br = FALSE;
+
+ /* Grok a component */
+ cia = get_erom_ent(sih, &eromptr, ER_TAG, ER_CI);
+ if (cia == (ER_END | ER_VALID)) {
+ SI_MSG(("Found END of erom after %d cores\n", sii->numcores));
+ return;
+ }
+ base = eromptr - sizeof(uint32);
+ cib = get_erom_ent(sih, &eromptr, 0, 0);
+
+ if ((cib & ER_TAG) != ER_CI) {
+ SI_ERROR(("CIA not followed by CIB\n"));
+ goto error;
+ }
+
+ cid = (cia & CIA_CID_MASK) >> CIA_CID_SHIFT;
+ mfg = (cia & CIA_MFG_MASK) >> CIA_MFG_SHIFT;
+ crev = (cib & CIB_REV_MASK) >> CIB_REV_SHIFT;
+ nmw = (cib & CIB_NMW_MASK) >> CIB_NMW_SHIFT;
+ nsw = (cib & CIB_NSW_MASK) >> CIB_NSW_SHIFT;
+ nmp = (cib & CIB_NMP_MASK) >> CIB_NMP_SHIFT;
+ nsp = (cib & CIB_NSP_MASK) >> CIB_NSP_SHIFT;
+
+ SI_MSG(("Found component 0x%04x/0x%4x rev %d at erom addr 0x%08x, with nmw = %d, "
+ "nsw = %d, nmp = %d & nsp = %d\n",
+ mfg, cid, crev, base, nmw, nsw, nmp, nsp));
+
+ if (((mfg == MFGID_ARM) && (cid == DEF_AI_COMP)) || (nsp == 0))
+ continue;
+ if ((nmw + nsw == 0)) {
+ /* A component which is not a core */
+ if (cid == OOB_ROUTER_CORE_ID) {
+ asd = get_asd(sih, &eromptr, 0, 0, AD_ST_SLAVE,
+ &addrl, &addrh, &sizel, &sizeh);
+ if (asd != 0) {
+ sii->common_info->oob_router = addrl;
+ }
+ }
+ continue;
+ }
+
+ idx = sii->numcores;
+/* sii->eromptr[idx] = base; */
+ sii->common_info->cia[idx] = cia;
+ sii->common_info->cib[idx] = cib;
+ sii->common_info->coreid[idx] = cid;
+
+ for (i = 0; i < nmp; i++) {
+ mpd = get_erom_ent(sih, &eromptr, ER_VALID, ER_VALID);
+ if ((mpd & ER_TAG) != ER_MP) {
+ SI_ERROR(("Not enough MP entries for component 0x%x\n", cid));
+ goto error;
+ }
+ SI_MSG((" Master port %d, mp: %d id: %d\n", i,
+ (mpd & MPD_MP_MASK) >> MPD_MP_SHIFT,
+ (mpd & MPD_MUI_MASK) >> MPD_MUI_SHIFT));
+ }
+
+ /* First Slave Address Descriptor should be port 0:
+ * the main register space for the core
+ */
+ asd = get_asd(sih, &eromptr, 0, 0, AD_ST_SLAVE, &addrl, &addrh, &sizel, &sizeh);
+ if (asd == 0) {
+ /* Try again to see if it is a bridge */
+ asd = get_asd(sih, &eromptr, 0, 0, AD_ST_BRIDGE, &addrl, &addrh,
+ &sizel, &sizeh);
+ if (asd != 0)
+ br = TRUE;
+ else
+ if ((addrh != 0) || (sizeh != 0) || (sizel != SI_CORE_SIZE)) {
+ SI_ERROR(("First Slave ASD for core 0x%04x malformed "
+ "(0x%08x)\n", cid, asd));
+ goto error;
+ }
+ }
+ sii->common_info->coresba[idx] = addrl;
+ sii->common_info->coresba_size[idx] = sizel;
+ /* Get any more ASDs in port 0 */
+ j = 1;
+ do {
+ asd = get_asd(sih, &eromptr, 0, j, AD_ST_SLAVE, &addrl, &addrh,
+ &sizel, &sizeh);
+ if ((asd != 0) && (j == 1) && (sizel == SI_CORE_SIZE))
+ sii->common_info->coresba2[idx] = addrl;
+ sii->common_info->coresba2_size[idx] = sizel;
+ j++;
+ } while (asd != 0);
+
+ /* Go through the ASDs for other slave ports */
+ for (i = 1; i < nsp; i++) {
+ j = 0;
+ do {
+ asd = get_asd(sih, &eromptr, i, j++, AD_ST_SLAVE, &addrl, &addrh,
+ &sizel, &sizeh);
+ } while (asd != 0);
+ if (j == 0) {
+ SI_ERROR((" SP %d has no address descriptors\n", i));
+ goto error;
+ }
+ }
+
+ /* Now get master wrappers */
+ for (i = 0; i < nmw; i++) {
+ asd = get_asd(sih, &eromptr, i, 0, AD_ST_MWRAP, &addrl, &addrh,
+ &sizel, &sizeh);
+ if (asd == 0) {
+ SI_ERROR(("Missing descriptor for MW %d\n", i));
+ goto error;
+ }
+ if ((sizeh != 0) || (sizel != SI_CORE_SIZE)) {
+ SI_ERROR(("Master wrapper %d is not 4KB\n", i));
+ goto error;
+ }
+ if (i == 0)
+ sii->common_info->wrapba[idx] = addrl;
+ }
+
+ /* And finally slave wrappers */
+ for (i = 0; i < nsw; i++) {
+ uint fwp = (nsp == 1) ? 0 : 1;
+ asd = get_asd(sih, &eromptr, fwp + i, 0, AD_ST_SWRAP, &addrl, &addrh,
+ &sizel, &sizeh);
+ if (asd == 0) {
+ SI_ERROR(("Missing descriptor for SW %d\n", i));
+ goto error;
+ }
+ if ((sizeh != 0) || (sizel != SI_CORE_SIZE)) {
+ SI_ERROR(("Slave wrapper %d is not 4KB\n", i));
+ goto error;
+ }
+ if ((nmw == 0) && (i == 0))
+ sii->common_info->wrapba[idx] = addrl;
+ }
+
+ /* Don't record bridges */
+ if (br)
+ continue;
+
+ /* Done with core */
+ sii->numcores++;
+ }
+
+ SI_ERROR(("Reached end of erom without finding END"));
+
+error:
+ sii->numcores = 0;
+ return;
+}
+
+/* This function changes the logical "focus" to the indicated core.
+ * Return the current core's virtual address.
+ */
+void *
+ai_setcoreidx(si_t *sih, uint coreidx)
+{
+ si_info_t *sii = SI_INFO(sih);
+ uint32 addr = sii->common_info->coresba[coreidx];
+ uint32 wrap = sii->common_info->wrapba[coreidx];
+ void *regs;
+
+ if (coreidx >= sii->numcores)
+ return (NULL);
+
+ /*
+ * If the user has provided an interrupt mask enabled function,
+ * then assert interrupts are disabled before switching the core.
+ */
+ ASSERT((sii->intrsenabled_fn == NULL) || !(*(sii)->intrsenabled_fn)((sii)->intr_arg));
+
+ switch (BUSTYPE(sih->bustype)) {
+ case SI_BUS:
+ /* map new one */
+ if (!sii->common_info->regs[coreidx]) {
+ sii->common_info->regs[coreidx] = REG_MAP(addr, SI_CORE_SIZE);
+ ASSERT(GOODREGS(sii->common_info->regs[coreidx]));
+ }
+ sii->curmap = regs = sii->common_info->regs[coreidx];
+ if (!sii->common_info->wrappers[coreidx]) {
+ sii->common_info->wrappers[coreidx] = REG_MAP(wrap, SI_CORE_SIZE);
+ ASSERT(GOODREGS(sii->common_info->wrappers[coreidx]));
+ }
+ sii->curwrap = sii->common_info->wrappers[coreidx];
+ break;
+
+
+ case SPI_BUS:
+ case SDIO_BUS:
+ sii->curmap = regs = (void *)((uintptr)addr);
+ sii->curwrap = (void *)((uintptr)wrap);
+ break;
+
+ case PCMCIA_BUS:
+ default:
+ ASSERT(0);
+ regs = NULL;
+ break;
+ }
+
+ sii->curmap = regs;
+ sii->curidx = coreidx;
+
+ return regs;
+}
+
+/* Return the number of address spaces in current core */
+int
+ai_numaddrspaces(si_t *sih)
+{
+ return 2;
+}
+
+/* Return the address of the nth address space in the current core */
+uint32
+ai_addrspace(si_t *sih, uint asidx)
+{
+ si_info_t *sii;
+ uint cidx;
+
+ sii = SI_INFO(sih);
+ cidx = sii->curidx;
+
+ if (asidx == 0)
+ return sii->common_info->coresba[cidx];
+ else if (asidx == 1)
+ return sii->common_info->coresba2[cidx];
+ else {
+ SI_ERROR(("%s: Need to parse the erom again to find addr space %d\n",
+ __FUNCTION__, asidx));
+ return 0;
+ }
+}
+
+/* Return the size of the nth address space in the current core */
+uint32
+ai_addrspacesize(si_t *sih, uint asidx)
+{
+ si_info_t *sii;
+ uint cidx;
+
+ sii = SI_INFO(sih);
+ cidx = sii->curidx;
+
+ if (asidx == 0)
+ return sii->common_info->coresba_size[cidx];
+ else if (asidx == 1)
+ return sii->common_info->coresba2_size[cidx];
+ else {
+ SI_ERROR(("%s: Need to parse the erom again to find addr space %d\n",
+ __FUNCTION__, asidx));
+ return 0;
+ }
+}
+
+uint
+ai_flag(si_t *sih)
+{
+ si_info_t *sii;
+ aidmp_t *ai;
+
+ sii = SI_INFO(sih);
+ ai = sii->curwrap;
+
+ return (R_REG(sii->osh, &ai->oobselouta30) & 0x1f);
+}
+
+void
+ai_setint(si_t *sih, int siflag)
+{
+}
+
+void
+ai_write_wrap_reg(si_t *sih, uint32 offset, uint32 val)
+{
+ si_info_t *sii = SI_INFO(sih);
+ aidmp_t *ai = sii->curwrap;
+ W_REG(sii->osh, (uint32 *)((uint8 *)ai+offset), val);
+ return;
+}
+
+uint
+ai_corevendor(si_t *sih)
+{
+ si_info_t *sii;
+ uint32 cia;
+
+ sii = SI_INFO(sih);
+ cia = sii->common_info->cia[sii->curidx];
+ return ((cia & CIA_MFG_MASK) >> CIA_MFG_SHIFT);
+}
+
+uint
+ai_corerev(si_t *sih)
+{
+ si_info_t *sii;
+ uint32 cib;
+
+ sii = SI_INFO(sih);
+ cib = sii->common_info->cib[sii->curidx];
+ return ((cib & CIB_REV_MASK) >> CIB_REV_SHIFT);
+}
+
+bool
+ai_iscoreup(si_t *sih)
+{
+ si_info_t *sii;
+ aidmp_t *ai;
+
+ sii = SI_INFO(sih);
+ ai = sii->curwrap;
+
+ return (((R_REG(sii->osh, &ai->ioctrl) & (SICF_FGC | SICF_CLOCK_EN)) == SICF_CLOCK_EN) &&
+ ((R_REG(sii->osh, &ai->resetctrl) & AIRC_RESET) == 0));
+}
+
+/*
+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
+ * switch back to the original core, and return the new value.
+ *
+ * When using the silicon backplane, no fidleing with interrupts or core switches are needed.
+ *
+ * Also, when using pci/pcie, we can optimize away the core switching for pci registers
+ * and (on newer pci cores) chipcommon registers.
+ */
+uint
+ai_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val)
+{
+ uint origidx = 0;
+ uint32 *r = NULL;
+ uint w;
+ uint intr_val = 0;
+ bool fast = FALSE;
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ ASSERT(GOODIDX(coreidx));
+ ASSERT(regoff < SI_CORE_SIZE);
+ ASSERT((val & ~mask) == 0);
+
+ if (coreidx >= SI_MAXCORES)
+ return 0;
+
+ if (BUSTYPE(sih->bustype) == SI_BUS) {
+ /* If internal bus, we can always get at everything */
+ fast = TRUE;
+ /* map if does not exist */
+ if (!sii->common_info->wrappers[coreidx]) {
+ sii->common_info->regs[coreidx] =
+ REG_MAP(sii->common_info->coresba[coreidx], SI_CORE_SIZE);
+ ASSERT(GOODREGS(sii->common_info->regs[coreidx]));
+ }
+ r = (uint32 *)((uchar *)sii->common_info->regs[coreidx] + regoff);
+ } else if (BUSTYPE(sih->bustype) == PCI_BUS) {
+ /* If pci/pcie, we can get at pci/pcie regs and on newer cores to chipc */
+
+ if ((sii->common_info->coreid[coreidx] == CC_CORE_ID) && SI_FAST(sii)) {
+ /* Chipc registers are mapped at 12KB */
+
+ fast = TRUE;
+ r = (uint32 *)((char *)sii->curmap + PCI_16KB0_CCREGS_OFFSET + regoff);
+ } else if (sii->pub.buscoreidx == coreidx) {
+ /* pci registers are at either in the last 2KB of an 8KB window
+ * or, in pcie and pci rev 13 at 8KB
+ */
+ fast = TRUE;
+ if (SI_FAST(sii))
+ r = (uint32 *)((char *)sii->curmap +
+ PCI_16KB0_PCIREGS_OFFSET + regoff);
+ else
+ r = (uint32 *)((char *)sii->curmap +
+ ((regoff >= SBCONFIGOFF) ?
+ PCI_BAR0_PCISBR_OFFSET : PCI_BAR0_PCIREGS_OFFSET) +
+ regoff);
+ }
+ }
+
+ if (!fast) {
+ INTR_OFF(sii, intr_val);
+
+ /* save current core index */
+ origidx = si_coreidx(&sii->pub);
+
+ /* switch core */
+ r = (uint32*) ((uchar*) ai_setcoreidx(&sii->pub, coreidx) + regoff);
+ }
+ ASSERT(r != NULL);
+
+ /* mask and set */
+ if (mask || val) {
+ w = (R_REG(sii->osh, r) & ~mask) | val;
+ W_REG(sii->osh, r, w);
+ }
+
+ /* readback */
+ w = R_REG(sii->osh, r);
+
+ if (!fast) {
+ /* restore core index */
+ if (origidx != coreidx)
+ ai_setcoreidx(&sii->pub, origidx);
+
+ INTR_RESTORE(sii, intr_val);
+ }
+
+ return (w);
+}
+
+void
+ai_core_disable(si_t *sih, uint32 bits)
+{
+ si_info_t *sii;
+ volatile uint32 dummy;
+ aidmp_t *ai;
+
+ sii = SI_INFO(sih);
+
+ ASSERT(GOODREGS(sii->curwrap));
+ ai = sii->curwrap;
+
+ /* if core is already in reset, just return */
+ if (R_REG(sii->osh, &ai->resetctrl) & AIRC_RESET)
+ return;
+
+ W_REG(sii->osh, &ai->ioctrl, bits);
+ dummy = R_REG(sii->osh, &ai->ioctrl);
+ OSL_DELAY(10);
+
+ W_REG(sii->osh, &ai->resetctrl, AIRC_RESET);
+ OSL_DELAY(1);
+}
+
+/* reset and re-enable a core
+ * inputs:
+ * bits - core specific bits that are set during and after reset sequence
+ * resetbits - core specific bits that are set only during reset sequence
+ */
+void
+ai_core_reset(si_t *sih, uint32 bits, uint32 resetbits)
+{
+ si_info_t *sii;
+ aidmp_t *ai;
+ volatile uint32 dummy;
+
+ sii = SI_INFO(sih);
+ ASSERT(GOODREGS(sii->curwrap));
+ ai = sii->curwrap;
+
+ /*
+ * Must do the disable sequence first to work for arbitrary current core state.
+ */
+ ai_core_disable(sih, (bits | resetbits));
+
+ /*
+ * Now do the initialization sequence.
+ */
+ W_REG(sii->osh, &ai->ioctrl, (bits | SICF_FGC | SICF_CLOCK_EN));
+ dummy = R_REG(sii->osh, &ai->ioctrl);
+ W_REG(sii->osh, &ai->resetctrl, 0);
+ OSL_DELAY(1);
+
+ W_REG(sii->osh, &ai->ioctrl, (bits | SICF_CLOCK_EN));
+ dummy = R_REG(sii->osh, &ai->ioctrl);
+ OSL_DELAY(1);
+}
+
+
+void
+ai_core_cflags_wo(si_t *sih, uint32 mask, uint32 val)
+{
+ si_info_t *sii;
+ aidmp_t *ai;
+ uint32 w;
+
+ sii = SI_INFO(sih);
+ ASSERT(GOODREGS(sii->curwrap));
+ ai = sii->curwrap;
+
+ ASSERT((val & ~mask) == 0);
+
+ if (mask || val) {
+ w = ((R_REG(sii->osh, &ai->ioctrl) & ~mask) | val);
+ W_REG(sii->osh, &ai->ioctrl, w);
+ }
+}
+
+uint32
+ai_core_cflags(si_t *sih, uint32 mask, uint32 val)
+{
+ si_info_t *sii;
+ aidmp_t *ai;
+ uint32 w;
+
+ sii = SI_INFO(sih);
+ ASSERT(GOODREGS(sii->curwrap));
+ ai = sii->curwrap;
+
+ ASSERT((val & ~mask) == 0);
+
+ if (mask || val) {
+ w = ((R_REG(sii->osh, &ai->ioctrl) & ~mask) | val);
+ W_REG(sii->osh, &ai->ioctrl, w);
+ }
+
+ return R_REG(sii->osh, &ai->ioctrl);
+}
+
+uint32
+ai_core_sflags(si_t *sih, uint32 mask, uint32 val)
+{
+ si_info_t *sii;
+ aidmp_t *ai;
+ uint32 w;
+
+ sii = SI_INFO(sih);
+ ASSERT(GOODREGS(sii->curwrap));
+ ai = sii->curwrap;
+
+ ASSERT((val & ~mask) == 0);
+ ASSERT((mask & ~SISF_CORE_BITS) == 0);
+
+ if (mask || val) {
+ w = ((R_REG(sii->osh, &ai->iostatus) & ~mask) | val);
+ W_REG(sii->osh, &ai->iostatus, w);
+ }
+
+ return R_REG(sii->osh, &ai->iostatus);
+}
diff --git a/drivers/net/wireless/bcm4329/bcmpcispi.c b/drivers/net/wireless/bcm4329/bcmpcispi.c
new file mode 100644
index 0000000..1a8b671
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmpcispi.c
@@ -0,0 +1,630 @@
+/*
+ * Broadcom SPI over PCI-SPI Host Controller, low-level hardware driver
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmpcispi.c,v 1.22.2.4.4.5.6.1 2010/08/13 00:26:05 Exp $
+ */
+
+#include <typedefs.h>
+#include <bcmutils.h>
+
+#include <sdio.h> /* SDIO Specs */
+#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */
+#include <sdiovar.h> /* to get msglevel bit values */
+
+#include <pcicfg.h>
+#include <bcmsdspi.h>
+#include <bcmspi.h>
+#include <bcmpcispi.h> /* BRCM PCI-SPI Host Controller Register definitions */
+
+
+/* ndis_osl.h needs to do a runtime check of the osh to map
+ * R_REG/W_REG to bus specific access similar to linux_osl.h.
+ * Until then...
+ */
+/* linux */
+
+#define SPIPCI_RREG R_REG
+#define SPIPCI_WREG W_REG
+
+
+#define SPIPCI_ANDREG(osh, r, v) SPIPCI_WREG(osh, (r), (SPIPCI_RREG(osh, r) & (v)))
+#define SPIPCI_ORREG(osh, r, v) SPIPCI_WREG(osh, (r), (SPIPCI_RREG(osh, r) | (v)))
+
+
+int bcmpcispi_dump = 0; /* Set to dump complete trace of all SPI bus transactions */
+
+typedef struct spih_info_ {
+ uint bar0; /* BAR0 of PCI Card */
+ uint bar1; /* BAR1 of PCI Card */
+ osl_t *osh; /* osh handle */
+ spih_pciregs_t *pciregs; /* PCI Core Registers */
+ spih_regs_t *regs; /* SPI Controller Registers */
+ uint8 rev; /* PCI Card Revision ID */
+} spih_info_t;
+
+
+/* Attach to PCI-SPI Host Controller Hardware */
+bool
+spi_hw_attach(sdioh_info_t *sd)
+{
+ osl_t *osh;
+ spih_info_t *si;
+
+ sd_trace(("%s: enter\n", __FUNCTION__));
+
+ osh = sd->osh;
+
+ if ((si = (spih_info_t *)MALLOC(osh, sizeof(spih_info_t))) == NULL) {
+ sd_err(("%s: out of memory, malloced %d bytes\n", __FUNCTION__, MALLOCED(osh)));
+ return FALSE;
+ }
+
+ bzero(si, sizeof(spih_info_t));
+
+ sd->controller = si;
+
+ si->osh = sd->osh;
+ si->rev = OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_REV, 4) & 0xFF;
+
+ if (si->rev < 3) {
+ sd_err(("Host controller %d not supported, please upgrade to rev >= 3\n", si->rev));
+ MFREE(osh, si, sizeof(spih_info_t));
+ return (FALSE);
+ }
+
+ sd_err(("Attaching to Generic PCI SPI Host Controller Rev %d\n", si->rev));
+
+ /* FPGA Revision < 3 not supported by driver anymore. */
+ ASSERT(si->rev >= 3);
+
+ si->bar0 = sd->bar0;
+
+ /* Rev < 10 PciSpiHost has 2 BARs:
+ * BAR0 = PCI Core Registers
+ * BAR1 = PciSpiHost Registers (all other cores on backplane)
+ *
+ * Rev 10 and up use a different PCI core which only has a single
+ * BAR0 which contains the PciSpiHost Registers.
+ */
+ if (si->rev < 10) {
+ si->pciregs = (spih_pciregs_t *)spi_reg_map(osh,
+ (uintptr)si->bar0,
+ sizeof(spih_pciregs_t));
+ sd_err(("Mapped PCI Core regs to BAR0 at %p\n", si->pciregs));
+
+ si->bar1 = OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_BAR1, 4);
+ si->regs = (spih_regs_t *)spi_reg_map(osh,
+ (uintptr)si->bar1,
+ sizeof(spih_regs_t));
+ sd_err(("Mapped SPI Controller regs to BAR1 at %p\n", si->regs));
+ } else {
+ si->regs = (spih_regs_t *)spi_reg_map(osh,
+ (uintptr)si->bar0,
+ sizeof(spih_regs_t));
+ sd_err(("Mapped SPI Controller regs to BAR0 at %p\n", si->regs));
+ si->pciregs = NULL;
+ }
+ /* Enable SPI Controller, 16.67MHz SPI Clock */
+ SPIPCI_WREG(osh, &si->regs->spih_ctrl, 0x000000d1);
+
+ /* Set extended feature register to defaults */
+ SPIPCI_WREG(osh, &si->regs->spih_ext, 0x00000000);
+
+ /* Set GPIO CS# High (de-asserted) */
+ SPIPCI_WREG(osh, &si->regs->spih_gpio_data, SPIH_CS);
+
+ /* set GPIO[0] to output for CS# */
+ /* set GPIO[1] to output for power control */
+ /* set GPIO[2] to input for card detect */
+ SPIPCI_WREG(osh, &si->regs->spih_gpio_ctrl, (SPIH_CS | SPIH_SLOT_POWER));
+
+ /* Clear out the Read FIFO in case there is any stuff left in there from a previous run. */
+ while ((SPIPCI_RREG(osh, &si->regs->spih_stat) & SPIH_RFEMPTY) == 0) {
+ SPIPCI_RREG(osh, &si->regs->spih_data);
+ }
+
+ /* Wait for power to stabilize to the SDIO Card (100msec was insufficient) */
+ OSL_DELAY(250000);
+
+ /* Check card detect on FPGA Revision >= 4 */
+ if (si->rev >= 4) {
+ if (SPIPCI_RREG(osh, &si->regs->spih_gpio_data) & SPIH_CARD_DETECT) {
+ sd_err(("%s: no card detected in SD slot\n", __FUNCTION__));
+ spi_reg_unmap(osh, (uintptr)si->regs, sizeof(spih_regs_t));
+ if (si->pciregs) {
+ spi_reg_unmap(osh, (uintptr)si->pciregs, sizeof(spih_pciregs_t));
+ }
+ MFREE(osh, si, sizeof(spih_info_t));
+ return FALSE;
+ }
+ }
+
+ /* Interrupts are level sensitive */
+ SPIPCI_WREG(osh, &si->regs->spih_int_edge, 0x80000000);
+
+ /* Interrupts are active low. */
+ SPIPCI_WREG(osh, &si->regs->spih_int_pol, 0x40000004);
+
+ /* Enable interrupts through PCI Core. */
+ if (si->pciregs) {
+ SPIPCI_WREG(osh, &si->pciregs->ICR, PCI_INT_PROP_EN);
+ }
+
+ sd_trace(("%s: exit\n", __FUNCTION__));
+ return TRUE;
+}
+
+/* Detach and return PCI-SPI Hardware to unconfigured state */
+bool
+spi_hw_detach(sdioh_info_t *sd)
+{
+ spih_info_t *si = (spih_info_t *)sd->controller;
+ osl_t *osh = si->osh;
+ spih_regs_t *regs = si->regs;
+ spih_pciregs_t *pciregs = si->pciregs;
+
+ sd_trace(("%s: enter\n", __FUNCTION__));
+
+ SPIPCI_WREG(osh, ®s->spih_ctrl, 0x00000010);
+ SPIPCI_WREG(osh, ®s->spih_gpio_ctrl, 0x00000000); /* Disable GPIO for CS# */
+ SPIPCI_WREG(osh, ®s->spih_int_mask, 0x00000000); /* Clear Intmask */
+ SPIPCI_WREG(osh, ®s->spih_hex_disp, 0x0000DEAF);
+ SPIPCI_WREG(osh, ®s->spih_int_edge, 0x00000000);
+ SPIPCI_WREG(osh, ®s->spih_int_pol, 0x00000000);
+ SPIPCI_WREG(osh, ®s->spih_hex_disp, 0x0000DEAD);
+
+ /* Disable interrupts through PCI Core. */
+ if (si->pciregs) {
+ SPIPCI_WREG(osh, &pciregs->ICR, 0x00000000);
+ spi_reg_unmap(osh, (uintptr)pciregs, sizeof(spih_pciregs_t));
+ }
+ spi_reg_unmap(osh, (uintptr)regs, sizeof(spih_regs_t));
+
+ MFREE(osh, si, sizeof(spih_info_t));
+
+ sd->controller = NULL;
+
+ sd_trace(("%s: exit\n", __FUNCTION__));
+ return TRUE;
+}
+
+/* Switch between internal (PCI) and external clock oscillator */
+static bool
+sdspi_switch_clock(sdioh_info_t *sd, bool ext_clk)
+{
+ spih_info_t *si = (spih_info_t *)sd->controller;
+ osl_t *osh = si->osh;
+ spih_regs_t *regs = si->regs;
+
+ /* Switch to desired clock, and reset the PLL. */
+ SPIPCI_WREG(osh, ®s->spih_pll_ctrl, ext_clk ? SPIH_EXT_CLK : 0);
+
+ SPINWAIT(((SPIPCI_RREG(osh, ®s->spih_pll_status) & SPIH_PLL_LOCKED)
+ != SPIH_PLL_LOCKED), 1000);
+ if ((SPIPCI_RREG(osh, ®s->spih_pll_status) & SPIH_PLL_LOCKED) != SPIH_PLL_LOCKED) {
+ sd_err(("%s: timeout waiting for PLL to lock\n", __FUNCTION__));
+ return (FALSE);
+ }
+ return (TRUE);
+
+}
+
+/* Configure PCI-SPI Host Controller's SPI Clock rate as a divisor into the
+ * base clock rate. The base clock is either the PCI Clock (33MHz) or the
+ * external clock oscillator at U17 on the PciSpiHost.
+ */
+bool
+spi_start_clock(sdioh_info_t *sd, uint16 div)
+{
+ spih_info_t *si = (spih_info_t *)sd->controller;
+ osl_t *osh = si->osh;
+ spih_regs_t *regs = si->regs;
+ uint32 t, espr, disp;
+ uint32 disp_xtal_freq;
+ bool ext_clock = FALSE;
+ char disp_string[5];
+
+ if (div > 2048) {
+ sd_err(("%s: divisor %d too large; using max of 2048\n", __FUNCTION__, div));
+ div = 2048;
+ } else if (div & (div - 1)) { /* Not a power of 2? */
+ /* Round up to a power of 2 */
+ while ((div + 1) & div)
+ div |= div >> 1;
+ div++;
+ }
+
+ /* For FPGA Rev >= 5, the use of an external clock oscillator is supported.
+ * If the oscillator is populated, use it to provide the SPI base clock,
+ * otherwise, default to the PCI clock as the SPI base clock.
+ */
+ if (si->rev >= 5) {
+ uint32 clk_tick;
+ /* Enable the External Clock Oscillator as PLL clock source. */
+ if (!sdspi_switch_clock(sd, TRUE)) {
+ sd_err(("%s: error switching to external clock\n", __FUNCTION__));
+ }
+
+ /* Check to make sure the external clock is running. If not, then it
+ * is not populated on the card, so we will default to the PCI clock.
+ */
+ clk_tick = SPIPCI_RREG(osh, ®s->spih_clk_count);
+ if (clk_tick == SPIPCI_RREG(osh, ®s->spih_clk_count)) {
+
+ /* Switch back to the PCI clock as the clock source. */
+ if (!sdspi_switch_clock(sd, FALSE)) {
+ sd_err(("%s: error switching to external clock\n", __FUNCTION__));
+ }
+ } else {
+ ext_clock = TRUE;
+ }
+ }
+
+ /* Hack to allow hot-swapping oscillators:
+ * 1. Force PCI clock as clock source, using sd_divisor of 0.
+ * 2. Swap oscillator
+ * 3. Set desired sd_divisor (will switch to external oscillator as clock source.
+ */
+ if (div == 0) {
+ ext_clock = FALSE;
+ div = 2;
+
+ /* Select PCI clock as the clock source. */
+ if (!sdspi_switch_clock(sd, FALSE)) {
+ sd_err(("%s: error switching to external clock\n", __FUNCTION__));
+ }
+
+ sd_err(("%s: Ok to hot-swap oscillators.\n", __FUNCTION__));
+ }
+
+ /* If using the external oscillator, read the clock frequency from the controller
+ * The value read is in units of 10000Hz, and it's not a nice round number because
+ * it is calculated by the FPGA. So to make up for that, we round it off.
+ */
+ if (ext_clock == TRUE) {
+ uint32 xtal_freq;
+
+ OSL_DELAY(1000);
+ xtal_freq = SPIPCI_RREG(osh, ®s->spih_xtal_freq) * 10000;
+
+ sd_info(("%s: Oscillator is %dHz\n", __FUNCTION__, xtal_freq));
+
+
+ disp_xtal_freq = xtal_freq / 10000;
+
+ /* Round it off to a nice number. */
+ if ((disp_xtal_freq % 100) > 50) {
+ disp_xtal_freq += 100;
+ }
+
+ disp_xtal_freq = (disp_xtal_freq / 100) * 100;
+ } else {
+ sd_err(("%s: no external oscillator installed, using PCI clock.\n", __FUNCTION__));
+ disp_xtal_freq = 3333;
+ }
+
+ /* Convert the SPI Clock frequency to BCD format. */
+ sprintf(disp_string, "%04d", disp_xtal_freq / div);
+
+ disp = (disp_string[0] - '0') << 12;
+ disp |= (disp_string[1] - '0') << 8;
+ disp |= (disp_string[2] - '0') << 4;
+ disp |= (disp_string[3] - '0');
+
+ /* Select the correct ESPR register value based on the divisor. */
+ switch (div) {
+ case 1: espr = 0x0; break;
+ case 2: espr = 0x1; break;
+ case 4: espr = 0x2; break;
+ case 8: espr = 0x5; break;
+ case 16: espr = 0x3; break;
+ case 32: espr = 0x4; break;
+ case 64: espr = 0x6; break;
+ case 128: espr = 0x7; break;
+ case 256: espr = 0x8; break;
+ case 512: espr = 0x9; break;
+ case 1024: espr = 0xa; break;
+ case 2048: espr = 0xb; break;
+ default: espr = 0x0; ASSERT(0); break;
+ }
+
+ t = SPIPCI_RREG(osh, ®s->spih_ctrl);
+ t &= ~3;
+ t |= espr & 3;
+ SPIPCI_WREG(osh, ®s->spih_ctrl, t);
+
+ t = SPIPCI_RREG(osh, ®s->spih_ext);
+ t &= ~3;
+ t |= (espr >> 2) & 3;
+ SPIPCI_WREG(osh, ®s->spih_ext, t);
+
+ SPIPCI_WREG(osh, ®s->spih_hex_disp, disp);
+
+ /* For Rev 8, writing to the PLL_CTRL register resets
+ * the PLL, and it can re-acquire in 200uS. For
+ * Rev 7 and older, we use a software delay to allow
+ * the PLL to re-acquire, which takes more than 2mS.
+ */
+ if (si->rev < 8) {
+ /* Wait for clock to settle. */
+ OSL_DELAY(5000);
+ }
+
+ sd_info(("%s: SPI_CTRL=0x%08x SPI_EXT=0x%08x\n",
+ __FUNCTION__,
+ SPIPCI_RREG(osh, ®s->spih_ctrl),
+ SPIPCI_RREG(osh, ®s->spih_ext)));
+
+ return TRUE;
+}
+
+/* Configure PCI-SPI Host Controller High-Speed Clocking mode setting */
+bool
+spi_controller_highspeed_mode(sdioh_info_t *sd, bool hsmode)
+{
+ spih_info_t *si = (spih_info_t *)sd->controller;
+ osl_t *osh = si->osh;
+ spih_regs_t *regs = si->regs;
+
+ if (si->rev >= 10) {
+ if (hsmode) {
+ SPIPCI_ORREG(osh, ®s->spih_ext, 0x10);
+ } else {
+ SPIPCI_ANDREG(osh, ®s->spih_ext, ~0x10);
+ }
+ }
+
+ return TRUE;
+}
+
+/* Disable device interrupt */
+void
+spi_devintr_off(sdioh_info_t *sd)
+{
+ spih_info_t *si = (spih_info_t *)sd->controller;
+ osl_t *osh = si->osh;
+ spih_regs_t *regs = si->regs;
+
+ sd_trace(("%s: %d\n", __FUNCTION__, sd->use_client_ints));
+ if (sd->use_client_ints) {
+ sd->intmask &= ~SPIH_DEV_INTR;
+ SPIPCI_WREG(osh, ®s->spih_int_mask, sd->intmask); /* Clear Intmask */
+ }
+}
+
+/* Enable device interrupt */
+void
+spi_devintr_on(sdioh_info_t *sd)
+{
+ spih_info_t *si = (spih_info_t *)sd->controller;
+ osl_t *osh = si->osh;
+ spih_regs_t *regs = si->regs;
+
+ ASSERT(sd->lockcount == 0);
+ sd_trace(("%s: %d\n", __FUNCTION__, sd->use_client_ints));
+ if (sd->use_client_ints) {
+ if (SPIPCI_RREG(osh, ®s->spih_ctrl) & 0x02) {
+ /* Ack in case one was pending but is no longer... */
+ SPIPCI_WREG(osh, ®s->spih_int_status, SPIH_DEV_INTR);
+ }
+ sd->intmask |= SPIH_DEV_INTR;
+ /* Set device intr in Intmask */
+ SPIPCI_WREG(osh, ®s->spih_int_mask, sd->intmask);
+ }
+}
+
+/* Check to see if an interrupt belongs to the PCI-SPI Host or a SPI Device */
+bool
+spi_check_client_intr(sdioh_info_t *sd, int *is_dev_intr)
+{
+ spih_info_t *si = (spih_info_t *)sd->controller;
+ osl_t *osh = si->osh;
+ spih_regs_t *regs = si->regs;
+ bool ours = FALSE;
+
+ uint32 raw_int, cur_int;
+ ASSERT(sd);
+
+ if (is_dev_intr)
+ *is_dev_intr = FALSE;
+ raw_int = SPIPCI_RREG(osh, ®s->spih_int_status);
+ cur_int = raw_int & sd->intmask;
+ if (cur_int & SPIH_DEV_INTR) {
+ if (sd->client_intr_enabled && sd->use_client_ints) {
+ sd->intrcount++;
+ ASSERT(sd->intr_handler);
+ ASSERT(sd->intr_handler_arg);
+ (sd->intr_handler)(sd->intr_handler_arg);
+ if (is_dev_intr)
+ *is_dev_intr = TRUE;
+ } else {
+ sd_trace(("%s: Not ready for intr: enabled %d, handler 0x%p\n",
+ __FUNCTION__, sd->client_intr_enabled, sd->intr_handler));
+ }
+ SPIPCI_WREG(osh, ®s->spih_int_status, SPIH_DEV_INTR);
+ SPIPCI_RREG(osh, ®s->spih_int_status);
+ ours = TRUE;
+ } else if (cur_int & SPIH_CTLR_INTR) {
+ /* Interrupt is from SPI FIFO... just clear and ack it... */
+ sd_trace(("%s: SPI CTLR interrupt: raw_int 0x%08x cur_int 0x%08x\n",
+ __FUNCTION__, raw_int, cur_int));
+
+ /* Clear the interrupt in the SPI_STAT register */
+ SPIPCI_WREG(osh, ®s->spih_stat, 0x00000080);
+
+ /* Ack the interrupt in the interrupt controller */
+ SPIPCI_WREG(osh, ®s->spih_int_status, SPIH_CTLR_INTR);
+ SPIPCI_RREG(osh, ®s->spih_int_status);
+
+ ours = TRUE;
+ } else if (cur_int & SPIH_WFIFO_INTR) {
+ sd_trace(("%s: SPI WR FIFO Empty interrupt: raw_int 0x%08x cur_int 0x%08x\n",
+ __FUNCTION__, raw_int, cur_int));
+
+ /* Disable the FIFO Empty Interrupt */
+ sd->intmask &= ~SPIH_WFIFO_INTR;
+ SPIPCI_WREG(osh, ®s->spih_int_mask, sd->intmask);
+
+ sd->local_intrcount++;
+ sd->got_hcint = TRUE;
+ ours = TRUE;
+ } else {
+ /* Not an error: can share interrupts... */
+ sd_trace(("%s: Not my interrupt: raw_int 0x%08x cur_int 0x%08x\n",
+ __FUNCTION__, raw_int, cur_int));
+ ours = FALSE;
+ }
+
+ return ours;
+}
+
+static void
+hexdump(char *pfx, unsigned char *msg, int msglen)
+{
+ int i, col;
+ char buf[80];
+
+ ASSERT(strlen(pfx) + 49 <= sizeof(buf));
+
+ col = 0;
+
+ for (i = 0; i < msglen; i++, col++) {
+ if (col % 16 == 0)
+ strcpy(buf, pfx);
+ sprintf(buf + strlen(buf), "%02x", msg[i]);
+ if ((col + 1) % 16 == 0)
+ printf("%s\n", buf);
+ else
+ sprintf(buf + strlen(buf), " ");
+ }
+
+ if (col % 16 != 0)
+ printf("%s\n", buf);
+}
+
+/* Send/Receive an SPI Packet */
+void
+spi_sendrecv(sdioh_info_t *sd, uint8 *msg_out, uint8 *msg_in, int msglen)
+{
+ spih_info_t *si = (spih_info_t *)sd->controller;
+ osl_t *osh = si->osh;
+ spih_regs_t *regs = si->regs;
+ uint32 count;
+ uint32 spi_data_out;
+ uint32 spi_data_in;
+ bool yield;
+
+ sd_trace(("%s: enter\n", __FUNCTION__));
+
+ if (bcmpcispi_dump) {
+ printf("SENDRECV(len=%d)\n", msglen);
+ hexdump(" OUT: ", msg_out, msglen);
+ }
+
+#ifdef BCMSDYIELD
+ /* Only yield the CPU and wait for interrupt on Rev 8 and newer FPGA images. */
+ yield = ((msglen > 500) && (si->rev >= 8));
+#else
+ yield = FALSE;
+#endif /* BCMSDYIELD */
+
+ ASSERT(msglen % 4 == 0);
+
+
+ SPIPCI_ANDREG(osh, ®s->spih_gpio_data, ~SPIH_CS); /* Set GPIO CS# Low (asserted) */
+
+ for (count = 0; count < (uint32)msglen/4; count++) {
+ spi_data_out = ((uint32)((uint32 *)msg_out)[count]);
+ SPIPCI_WREG(osh, ®s->spih_data, spi_data_out);
+ }
+
+#ifdef BCMSDYIELD
+ if (yield) {
+ /* Ack the interrupt in the interrupt controller */
+ SPIPCI_WREG(osh, ®s->spih_int_status, SPIH_WFIFO_INTR);
+ SPIPCI_RREG(osh, ®s->spih_int_status);
+
+ /* Enable the FIFO Empty Interrupt */
+ sd->intmask |= SPIH_WFIFO_INTR;
+ sd->got_hcint = FALSE;
+ SPIPCI_WREG(osh, ®s->spih_int_mask, sd->intmask);
+
+ }
+#endif /* BCMSDYIELD */
+
+ /* Wait for write fifo to empty... */
+ SPIPCI_ANDREG(osh, ®s->spih_gpio_data, ~0x00000020); /* Set GPIO 5 Low */
+
+ if (yield) {
+ ASSERT((SPIPCI_RREG(sd->osh, ®s->spih_stat) & SPIH_WFEMPTY) == 0);
+ }
+
+ spi_waitbits(sd, yield);
+ SPIPCI_ORREG(osh, ®s->spih_gpio_data, 0x00000020); /* Set GPIO 5 High (de-asserted) */
+
+ for (count = 0; count < (uint32)msglen/4; count++) {
+ spi_data_in = SPIPCI_RREG(osh, ®s->spih_data);
+ ((uint32 *)msg_in)[count] = spi_data_in;
+ }
+
+ /* Set GPIO CS# High (de-asserted) */
+ SPIPCI_ORREG(osh, ®s->spih_gpio_data, SPIH_CS);
+
+ if (bcmpcispi_dump) {
+ hexdump(" IN : ", msg_in, msglen);
+ }
+}
+
+void
+spi_spinbits(sdioh_info_t *sd)
+{
+ spih_info_t *si = (spih_info_t *)sd->controller;
+ osl_t *osh = si->osh;
+ spih_regs_t *regs = si->regs;
+ uint spin_count; /* Spin loop bound check */
+
+ spin_count = 0;
+ while ((SPIPCI_RREG(sd->osh, ®s->spih_stat) & SPIH_WFEMPTY) == 0) {
+ if (spin_count > SPI_SPIN_BOUND) {
+ sd_err(("%s: SPIH_WFEMPTY spin bits out of bound %u times \n",
+ __FUNCTION__, spin_count));
+ ASSERT(FALSE);
+ }
+ spin_count++;
+ }
+
+ /* Wait for SPI Transfer state machine to return to IDLE state.
+ * The state bits are only implemented in Rev >= 5 FPGA. These
+ * bits are hardwired to 00 for Rev < 5, so this check doesn't cause
+ * any problems.
+ */
+ spin_count = 0;
+ while ((SPIPCI_RREG(osh, ®s->spih_stat) & SPIH_STATE_MASK) != 0) {
+ if (spin_count > SPI_SPIN_BOUND) {
+ sd_err(("%s: SPIH_STATE_MASK spin bits out of bound %u times \n",
+ __FUNCTION__, spin_count));
+ ASSERT(FALSE);
+ }
+ spin_count++;
+ }
+}
diff --git a/drivers/net/wireless/bcm4329/bcmsdh.c b/drivers/net/wireless/bcm4329/bcmsdh.c
new file mode 100644
index 0000000..4bf5889
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmsdh.c
@@ -0,0 +1,652 @@
+/*
+ * BCMSDH interface glue
+ * implement bcmsdh API for SDIOH driver
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdh.c,v 1.35.2.1.4.8.6.13 2010/04/06 03:26:57 Exp $
+ */
+/* ****************** BCMSDH Interface Functions *************************** */
+
+#include <typedefs.h>
+#include <bcmdevs.h>
+#include <bcmendian.h>
+#include <bcmutils.h>
+#include <hndsoc.h>
+#include <siutils.h>
+#include <osl.h>
+
+#include <bcmsdh.h> /* BRCM API for SDIO clients (such as wl, dhd) */
+#include <bcmsdbus.h> /* common SDIO/controller interface */
+#include <sbsdio.h> /* BRCM sdio device core */
+
+#include <sdio.h> /* sdio spec */
+
+#define SDIOH_API_ACCESS_RETRY_LIMIT 2
+const uint bcmsdh_msglevel = BCMSDH_ERROR_VAL;
+
+
+struct bcmsdh_info
+{
+ bool init_success; /* underlying driver successfully attached */
+ void *sdioh; /* handler for sdioh */
+ uint32 vendevid; /* Target Vendor and Device ID on SD bus */
+ osl_t *osh;
+ bool regfail; /* Save status of last reg_read/reg_write call */
+ uint32 sbwad; /* Save backplane window address */
+};
+/* local copy of bcm sd handler */
+bcmsdh_info_t * l_bcmsdh = NULL;
+
+#if defined(OOB_INTR_ONLY) && defined(HW_OOB)
+extern int
+sdioh_enable_hw_oob_intr(void *sdioh, bool enable);
+
+void
+bcmsdh_enable_hw_oob_intr(bcmsdh_info_t *sdh, bool enable)
+{
+ sdioh_enable_hw_oob_intr(sdh->sdioh, enable);
+}
+#endif
+
+bcmsdh_info_t *
+bcmsdh_attach(osl_t *osh, void *cfghdl, void **regsva, uint irq)
+{
+ bcmsdh_info_t *bcmsdh;
+
+ if ((bcmsdh = (bcmsdh_info_t *)MALLOC(osh, sizeof(bcmsdh_info_t))) == NULL) {
+ BCMSDH_ERROR(("bcmsdh_attach: out of memory, malloced %d bytes\n", MALLOCED(osh)));
+ return NULL;
+ }
+ bzero((char *)bcmsdh, sizeof(bcmsdh_info_t));
+
+ /* save the handler locally */
+ l_bcmsdh = bcmsdh;
+
+ if (!(bcmsdh->sdioh = sdioh_attach(osh, cfghdl, irq))) {
+ bcmsdh_detach(osh, bcmsdh);
+ return NULL;
+ }
+
+ bcmsdh->osh = osh;
+ bcmsdh->init_success = TRUE;
+
+ *regsva = (uint32 *)SI_ENUM_BASE;
+
+ /* Report the BAR, to fix if needed */
+ bcmsdh->sbwad = SI_ENUM_BASE;
+ return bcmsdh;
+}
+
+int
+bcmsdh_detach(osl_t *osh, void *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+
+ if (bcmsdh != NULL) {
+ if (bcmsdh->sdioh) {
+ sdioh_detach(osh, bcmsdh->sdioh);
+ bcmsdh->sdioh = NULL;
+ }
+ MFREE(osh, bcmsdh, sizeof(bcmsdh_info_t));
+ }
+
+ l_bcmsdh = NULL;
+ return 0;
+}
+
+int
+bcmsdh_iovar_op(void *sdh, const char *name,
+ void *params, int plen, void *arg, int len, bool set)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ return sdioh_iovar_op(bcmsdh->sdioh, name, params, plen, arg, len, set);
+}
+
+bool
+bcmsdh_intr_query(void *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+ bool on;
+
+ ASSERT(bcmsdh);
+ status = sdioh_interrupt_query(bcmsdh->sdioh, &on);
+ if (SDIOH_API_SUCCESS(status))
+ return FALSE;
+ else
+ return on;
+}
+
+int
+bcmsdh_intr_enable(void *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+ ASSERT(bcmsdh);
+
+ status = sdioh_interrupt_set(bcmsdh->sdioh, TRUE);
+ return (SDIOH_API_SUCCESS(status) ? 0 : BCME_ERROR);
+}
+
+int
+bcmsdh_intr_disable(void *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+ ASSERT(bcmsdh);
+
+ status = sdioh_interrupt_set(bcmsdh->sdioh, FALSE);
+ return (SDIOH_API_SUCCESS(status) ? 0 : BCME_ERROR);
+}
+
+int
+bcmsdh_intr_reg(void *sdh, bcmsdh_cb_fn_t fn, void *argh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+ ASSERT(bcmsdh);
+
+ status = sdioh_interrupt_register(bcmsdh->sdioh, fn, argh);
+ return (SDIOH_API_SUCCESS(status) ? 0 : BCME_ERROR);
+}
+
+int
+bcmsdh_intr_dereg(void *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+ ASSERT(bcmsdh);
+
+ status = sdioh_interrupt_deregister(bcmsdh->sdioh);
+ return (SDIOH_API_SUCCESS(status) ? 0 : BCME_ERROR);
+}
+
+#if defined(DHD_DEBUG)
+bool
+bcmsdh_intr_pending(void *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+
+ ASSERT(sdh);
+ return sdioh_interrupt_pending(bcmsdh->sdioh);
+}
+#endif
+
+
+int
+bcmsdh_devremove_reg(void *sdh, bcmsdh_cb_fn_t fn, void *argh)
+{
+ ASSERT(sdh);
+
+ /* don't support yet */
+ return BCME_UNSUPPORTED;
+}
+
+uint8
+bcmsdh_cfg_read(void *sdh, uint fnc_num, uint32 addr, int *err)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+#ifdef SDIOH_API_ACCESS_RETRY_LIMIT
+ int32 retry = 0;
+#endif
+ uint8 data = 0;
+
+ if (!bcmsdh)
+ bcmsdh = l_bcmsdh;
+
+ ASSERT(bcmsdh->init_success);
+
+#ifdef SDIOH_API_ACCESS_RETRY_LIMIT
+ do {
+ if (retry) /* wait for 1 ms till bus get settled down */
+ OSL_DELAY(1000);
+#endif
+ status = sdioh_cfg_read(bcmsdh->sdioh, fnc_num, addr, (uint8 *)&data);
+#ifdef SDIOH_API_ACCESS_RETRY_LIMIT
+ } while (!SDIOH_API_SUCCESS(status) && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT));
+#endif
+ if (err)
+ *err = (SDIOH_API_SUCCESS(status) ? 0 : BCME_SDIO_ERROR);
+
+ BCMSDH_INFO(("%s:fun = %d, addr = 0x%x, uint8data = 0x%x\n", __FUNCTION__,
+ fnc_num, addr, data));
+
+ return data;
+}
+
+void
+bcmsdh_cfg_write(void *sdh, uint fnc_num, uint32 addr, uint8 data, int *err)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+#ifdef SDIOH_API_ACCESS_RETRY_LIMIT
+ int32 retry = 0;
+#endif
+
+ if (!bcmsdh)
+ bcmsdh = l_bcmsdh;
+
+ ASSERT(bcmsdh->init_success);
+
+#ifdef SDIOH_API_ACCESS_RETRY_LIMIT
+ do {
+ if (retry) /* wait for 1 ms till bus get settled down */
+ OSL_DELAY(1000);
+#endif
+ status = sdioh_cfg_write(bcmsdh->sdioh, fnc_num, addr, (uint8 *)&data);
+#ifdef SDIOH_API_ACCESS_RETRY_LIMIT
+ } while (!SDIOH_API_SUCCESS(status) && (retry++ < SDIOH_API_ACCESS_RETRY_LIMIT));
+#endif
+ if (err)
+ *err = SDIOH_API_SUCCESS(status) ? 0 : BCME_SDIO_ERROR;
+
+ BCMSDH_INFO(("%s:fun = %d, addr = 0x%x, uint8data = 0x%x\n", __FUNCTION__,
+ fnc_num, addr, data));
+}
+
+uint32
+bcmsdh_cfg_read_word(void *sdh, uint fnc_num, uint32 addr, int *err)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+ uint32 data = 0;
+
+ if (!bcmsdh)
+ bcmsdh = l_bcmsdh;
+
+ ASSERT(bcmsdh->init_success);
+
+ status = sdioh_request_word(bcmsdh->sdioh, SDIOH_CMD_TYPE_NORMAL, SDIOH_READ, fnc_num,
+ addr, &data, 4);
+
+ if (err)
+ *err = (SDIOH_API_SUCCESS(status) ? 0 : BCME_SDIO_ERROR);
+
+ BCMSDH_INFO(("%s:fun = %d, addr = 0x%x, uint32data = 0x%x\n", __FUNCTION__,
+ fnc_num, addr, data));
+
+ return data;
+}
+
+void
+bcmsdh_cfg_write_word(void *sdh, uint fnc_num, uint32 addr, uint32 data, int *err)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+
+ if (!bcmsdh)
+ bcmsdh = l_bcmsdh;
+
+ ASSERT(bcmsdh->init_success);
+
+ status = sdioh_request_word(bcmsdh->sdioh, SDIOH_CMD_TYPE_NORMAL, SDIOH_WRITE, fnc_num,
+ addr, &data, 4);
+
+ if (err)
+ *err = (SDIOH_API_SUCCESS(status) ? 0 : BCME_SDIO_ERROR);
+
+ BCMSDH_INFO(("%s:fun = %d, addr = 0x%x, uint32data = 0x%x\n", __FUNCTION__, fnc_num,
+ addr, data));
+}
+
+
+int
+bcmsdh_cis_read(void *sdh, uint func, uint8 *cis, uint length)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+
+ uint8 *tmp_buf, *tmp_ptr;
+ uint8 *ptr;
+ bool ascii = func & ~0xf;
+ func &= 0x7;
+
+ if (!bcmsdh)
+ bcmsdh = l_bcmsdh;
+
+ ASSERT(bcmsdh->init_success);
+ ASSERT(cis);
+ ASSERT(length <= SBSDIO_CIS_SIZE_LIMIT);
+
+ status = sdioh_cis_read(bcmsdh->sdioh, func, cis, length);
+
+ if (ascii) {
+ /* Move binary bits to tmp and format them into the provided buffer. */
+ if ((tmp_buf = (uint8 *)MALLOC(bcmsdh->osh, length)) == NULL) {
+ BCMSDH_ERROR(("%s: out of memory\n", __FUNCTION__));
+ return BCME_NOMEM;
+ }
+ bcopy(cis, tmp_buf, length);
+ for (tmp_ptr = tmp_buf, ptr = cis; ptr < (cis + length - 4); tmp_ptr++) {
+ ptr += sprintf((char*)ptr, "%.2x ", *tmp_ptr & 0xff);
+ if ((((tmp_ptr - tmp_buf) + 1) & 0xf) == 0)
+ ptr += sprintf((char *)ptr, "\n");
+ }
+ MFREE(bcmsdh->osh, tmp_buf, length);
+ }
+
+ return (SDIOH_API_SUCCESS(status) ? 0 : BCME_ERROR);
+}
+
+
+static int
+bcmsdhsdio_set_sbaddr_window(void *sdh, uint32 address)
+{
+ int err = 0;
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ bcmsdh_cfg_write(bcmsdh, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW,
+ (address >> 8) & SBSDIO_SBADDRLOW_MASK, &err);
+ if (!err)
+ bcmsdh_cfg_write(bcmsdh, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRMID,
+ (address >> 16) & SBSDIO_SBADDRMID_MASK, &err);
+ if (!err)
+ bcmsdh_cfg_write(bcmsdh, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRHIGH,
+ (address >> 24) & SBSDIO_SBADDRHIGH_MASK, &err);
+
+
+ return err;
+}
+
+uint32
+bcmsdh_reg_read(void *sdh, uint32 addr, uint size)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+ uint32 word = 0;
+ uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
+
+ BCMSDH_INFO(("%s:fun = 1, addr = 0x%x, ", __FUNCTION__, addr));
+
+ if (!bcmsdh)
+ bcmsdh = l_bcmsdh;
+
+ ASSERT(bcmsdh->init_success);
+
+ if (bar0 != bcmsdh->sbwad) {
+ if (bcmsdhsdio_set_sbaddr_window(bcmsdh, bar0))
+ return 0xFFFFFFFF;
+
+ bcmsdh->sbwad = bar0;
+ }
+
+ addr &= SBSDIO_SB_OFT_ADDR_MASK;
+ if (size == 4)
+ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+ status = sdioh_request_word(bcmsdh->sdioh, SDIOH_CMD_TYPE_NORMAL,
+ SDIOH_READ, SDIO_FUNC_1, addr, &word, size);
+
+ bcmsdh->regfail = !(SDIOH_API_SUCCESS(status));
+
+ BCMSDH_INFO(("uint32data = 0x%x\n", word));
+
+ /* if ok, return appropriately masked word */
+ if (SDIOH_API_SUCCESS(status)) {
+ switch (size) {
+ case sizeof(uint8):
+ return (word & 0xff);
+ case sizeof(uint16):
+ return (word & 0xffff);
+ case sizeof(uint32):
+ return word;
+ default:
+ bcmsdh->regfail = TRUE;
+
+ }
+ }
+
+ /* otherwise, bad sdio access or invalid size */
+ BCMSDH_ERROR(("%s: error reading addr 0x%04x size %d\n", __FUNCTION__, addr, size));
+ return 0xFFFFFFFF;
+}
+
+uint32
+bcmsdh_reg_write(void *sdh, uint32 addr, uint size, uint32 data)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+ uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
+ int err = 0;
+
+ BCMSDH_INFO(("%s:fun = 1, addr = 0x%x, uint%ddata = 0x%x\n",
+ __FUNCTION__, addr, size*8, data));
+
+ if (!bcmsdh)
+ bcmsdh = l_bcmsdh;
+
+ ASSERT(bcmsdh->init_success);
+
+ if (bar0 != bcmsdh->sbwad) {
+ if ((err = bcmsdhsdio_set_sbaddr_window(bcmsdh, bar0)))
+ return err;
+
+ bcmsdh->sbwad = bar0;
+ }
+
+ addr &= SBSDIO_SB_OFT_ADDR_MASK;
+ if (size == 4)
+ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+ status = sdioh_request_word(bcmsdh->sdioh, SDIOH_CMD_TYPE_NORMAL, SDIOH_WRITE, SDIO_FUNC_1,
+ addr, &data, size);
+ bcmsdh->regfail = !(SDIOH_API_SUCCESS(status));
+
+ if (SDIOH_API_SUCCESS(status))
+ return 0;
+
+ BCMSDH_ERROR(("%s: error writing 0x%08x to addr 0x%04x size %d\n",
+ __FUNCTION__, data, addr, size));
+ return 0xFFFFFFFF;
+}
+
+bool
+bcmsdh_regfail(void *sdh)
+{
+ return ((bcmsdh_info_t *)sdh)->regfail;
+}
+
+int
+bcmsdh_recv_buf(void *sdh, uint32 addr, uint fn, uint flags,
+ uint8 *buf, uint nbytes, void *pkt,
+ bcmsdh_cmplt_fn_t complete, void *handle)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+ uint incr_fix;
+ uint width;
+ uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
+ int err = 0;
+
+ ASSERT(bcmsdh);
+ ASSERT(bcmsdh->init_success);
+
+ BCMSDH_INFO(("%s:fun = %d, addr = 0x%x, size = %d\n",
+ __FUNCTION__, fn, addr, nbytes));
+
+ /* Async not implemented yet */
+ ASSERT(!(flags & SDIO_REQ_ASYNC));
+ if (flags & SDIO_REQ_ASYNC)
+ return BCME_UNSUPPORTED;
+
+ if (bar0 != bcmsdh->sbwad) {
+ if ((err = bcmsdhsdio_set_sbaddr_window(bcmsdh, bar0)))
+ return err;
+
+ bcmsdh->sbwad = bar0;
+ }
+
+ addr &= SBSDIO_SB_OFT_ADDR_MASK;
+
+ incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
+ width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
+ if (width == 4)
+ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+ status = sdioh_request_buffer(bcmsdh->sdioh, SDIOH_DATA_PIO, incr_fix,
+ SDIOH_READ, fn, addr, width, nbytes, buf, pkt);
+
+ return (SDIOH_API_SUCCESS(status) ? 0 : BCME_SDIO_ERROR);
+}
+
+int
+bcmsdh_send_buf(void *sdh, uint32 addr, uint fn, uint flags,
+ uint8 *buf, uint nbytes, void *pkt,
+ bcmsdh_cmplt_fn_t complete, void *handle)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+ uint incr_fix;
+ uint width;
+ uint bar0 = addr & ~SBSDIO_SB_OFT_ADDR_MASK;
+ int err = 0;
+
+ ASSERT(bcmsdh);
+ ASSERT(bcmsdh->init_success);
+
+ BCMSDH_INFO(("%s:fun = %d, addr = 0x%x, size = %d\n",
+ __FUNCTION__, fn, addr, nbytes));
+
+ /* Async not implemented yet */
+ ASSERT(!(flags & SDIO_REQ_ASYNC));
+ if (flags & SDIO_REQ_ASYNC)
+ return BCME_UNSUPPORTED;
+
+ if (bar0 != bcmsdh->sbwad) {
+ if ((err = bcmsdhsdio_set_sbaddr_window(bcmsdh, bar0)))
+ return err;
+
+ bcmsdh->sbwad = bar0;
+ }
+
+ addr &= SBSDIO_SB_OFT_ADDR_MASK;
+
+ incr_fix = (flags & SDIO_REQ_FIXED) ? SDIOH_DATA_FIX : SDIOH_DATA_INC;
+ width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
+ if (width == 4)
+ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+ status = sdioh_request_buffer(bcmsdh->sdioh, SDIOH_DATA_PIO, incr_fix,
+ SDIOH_WRITE, fn, addr, width, nbytes, buf, pkt);
+
+ return (SDIOH_API_SUCCESS(status) ? 0 : BCME_ERROR);
+}
+
+int
+bcmsdh_rwdata(void *sdh, uint rw, uint32 addr, uint8 *buf, uint nbytes)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ SDIOH_API_RC status;
+
+ ASSERT(bcmsdh);
+ ASSERT(bcmsdh->init_success);
+ ASSERT((addr & SBSDIO_SBWINDOW_MASK) == 0);
+
+ addr &= SBSDIO_SB_OFT_ADDR_MASK;
+ addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
+
+ status = sdioh_request_buffer(bcmsdh->sdioh, SDIOH_DATA_PIO, SDIOH_DATA_INC,
+ (rw ? SDIOH_WRITE : SDIOH_READ), SDIO_FUNC_1,
+ addr, 4, nbytes, buf, NULL);
+
+ return (SDIOH_API_SUCCESS(status) ? 0 : BCME_ERROR);
+}
+
+int
+bcmsdh_abort(void *sdh, uint fn)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+
+ return sdioh_abort(bcmsdh->sdioh, fn);
+}
+
+int
+bcmsdh_start(void *sdh, int stage)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+
+ return sdioh_start(bcmsdh->sdioh, stage);
+}
+
+int
+bcmsdh_stop(void *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+
+ return sdioh_stop(bcmsdh->sdioh);
+}
+
+
+int
+bcmsdh_query_device(void *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+ bcmsdh->vendevid = (VENDOR_BROADCOM << 16) | 0;
+ return (bcmsdh->vendevid);
+}
+
+uint
+bcmsdh_query_iofnum(void *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+
+ if (!bcmsdh)
+ bcmsdh = l_bcmsdh;
+
+ return (sdioh_query_iofnum(bcmsdh->sdioh));
+}
+
+int
+bcmsdh_reset(bcmsdh_info_t *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+
+ return sdioh_sdio_reset(bcmsdh->sdioh);
+}
+
+void *bcmsdh_get_sdioh(bcmsdh_info_t *sdh)
+{
+ ASSERT(sdh);
+ return sdh->sdioh;
+}
+
+/* Function to pass device-status bits to DHD. */
+uint32
+bcmsdh_get_dstatus(void *sdh)
+{
+ return 0;
+}
+uint32
+bcmsdh_cur_sbwad(void *sdh)
+{
+ bcmsdh_info_t *bcmsdh = (bcmsdh_info_t *)sdh;
+
+ if (!bcmsdh)
+ bcmsdh = l_bcmsdh;
+
+ return (bcmsdh->sbwad);
+}
+
+void
+bcmsdh_chipinfo(void *sdh, uint32 chip, uint32 chiprev)
+{
+ return;
+}
diff --git a/drivers/net/wireless/bcm4329/bcmsdh_linux.c b/drivers/net/wireless/bcm4329/bcmsdh_linux.c
new file mode 100644
index 0000000..3b7da42
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmsdh_linux.c
@@ -0,0 +1,719 @@
+/*
+ * SDIO access interface for drivers - linux specific (pci only)
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdh_linux.c,v 1.42.10.10.2.14.4.2 2010/09/15 00:30:11 Exp $
+ */
+
+/**
+ * @file bcmsdh_linux.c
+ */
+
+#define __UNDEF_NO_VERSION__
+
+#include <typedefs.h>
+#include <linuxver.h>
+
+#include <linux/pci.h>
+#include <linux/completion.h>
+
+#include <osl.h>
+#include <pcicfg.h>
+#include <bcmdefs.h>
+#include <bcmdevs.h>
+
+#if defined(OOB_INTR_ONLY)
+#include <linux/irq.h>
+extern void dhdsdio_isr(void * args);
+#include <bcmutils.h>
+#include <dngl_stats.h>
+#include <dhd.h>
+#endif /* defined(OOB_INTR_ONLY) */
+#if defined(CONFIG_MACH_SANDGATE2G) || defined(CONFIG_MACH_LOGICPD_PXA270)
+#if !defined(BCMPLATFORM_BUS)
+#define BCMPLATFORM_BUS
+#endif /* !defined(BCMPLATFORM_BUS) */
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19))
+#include <linux/platform_device.h>
+#endif /* KERNEL_VERSION(2, 6, 19) */
+#endif /* CONFIG_MACH_SANDGATE2G || CONFIG_MACH_LOGICPD_PXA270 */
+
+/**
+ * SDIO Host Controller info
+ */
+typedef struct bcmsdh_hc bcmsdh_hc_t;
+
+struct bcmsdh_hc {
+ bcmsdh_hc_t *next;
+#ifdef BCMPLATFORM_BUS
+ struct device *dev; /* platform device handle */
+#else
+ struct pci_dev *dev; /* pci device handle */
+#endif /* BCMPLATFORM_BUS */
+ osl_t *osh;
+ void *regs; /* SDIO Host Controller address */
+ bcmsdh_info_t *sdh; /* SDIO Host Controller handle */
+ void *ch;
+ unsigned int oob_irq;
+ unsigned long oob_flags; /* OOB Host specifiction as edge and etc */
+ bool oob_irq_registered;
+#if defined(OOB_INTR_ONLY)
+ spinlock_t irq_lock;
+#endif
+};
+static bcmsdh_hc_t *sdhcinfo = NULL;
+
+/* driver info, initialized when bcmsdh_register is called */
+static bcmsdh_driver_t drvinfo = {NULL, NULL};
+
+/* debugging macros */
+#define SDLX_MSG(x)
+
+/**
+ * Checks to see if vendor and device IDs match a supported SDIO Host Controller.
+ */
+bool
+bcmsdh_chipmatch(uint16 vendor, uint16 device)
+{
+ /* Add other vendors and devices as required */
+
+#ifdef BCMSDIOH_STD
+ /* Check for Arasan host controller */
+ if (vendor == VENDOR_SI_IMAGE) {
+ return (TRUE);
+ }
+ /* Check for BRCM 27XX Standard host controller */
+ if (device == BCM27XX_SDIOH_ID && vendor == VENDOR_BROADCOM) {
+ return (TRUE);
+ }
+ /* Check for BRCM Standard host controller */
+ if (device == SDIOH_FPGA_ID && vendor == VENDOR_BROADCOM) {
+ return (TRUE);
+ }
+ /* Check for TI PCIxx21 Standard host controller */
+ if (device == PCIXX21_SDIOH_ID && vendor == VENDOR_TI) {
+ return (TRUE);
+ }
+ if (device == PCIXX21_SDIOH0_ID && vendor == VENDOR_TI) {
+ return (TRUE);
+ }
+ /* Ricoh R5C822 Standard SDIO Host */
+ if (device == R5C822_SDIOH_ID && vendor == VENDOR_RICOH) {
+ return (TRUE);
+ }
+ /* JMicron Standard SDIO Host */
+ if (device == JMICRON_SDIOH_ID && vendor == VENDOR_JMICRON) {
+ return (TRUE);
+ }
+
+#endif /* BCMSDIOH_STD */
+#ifdef BCMSDIOH_SPI
+ /* This is the PciSpiHost. */
+ if (device == SPIH_FPGA_ID && vendor == VENDOR_BROADCOM) {
+ printf("Found PCI SPI Host Controller\n");
+ return (TRUE);
+ }
+
+#endif /* BCMSDIOH_SPI */
+
+ return (FALSE);
+}
+
+#if defined(BCMPLATFORM_BUS)
+#if defined(BCMLXSDMMC)
+/* forward declarations */
+int bcmsdh_probe(struct device *dev);
+int bcmsdh_remove(struct device *dev);
+
+EXPORT_SYMBOL(bcmsdh_probe);
+EXPORT_SYMBOL(bcmsdh_remove);
+
+#else
+/* forward declarations */
+static int __devinit bcmsdh_probe(struct device *dev);
+static int __devexit bcmsdh_remove(struct device *dev);
+#endif /* BCMLXSDMMC */
+
+#ifndef BCMLXSDMMC
+static struct device_driver bcmsdh_driver = {
+ .name = "pxa2xx-mci",
+ .bus = &platform_bus_type,
+ .probe = bcmsdh_probe,
+ .remove = bcmsdh_remove,
+ .suspend = NULL,
+ .resume = NULL,
+ };
+#endif /* BCMLXSDMMC */
+
+#ifndef BCMLXSDMMC
+static
+#endif /* BCMLXSDMMC */
+int bcmsdh_probe(struct device *dev)
+{
+ osl_t *osh = NULL;
+ bcmsdh_hc_t *sdhc = NULL;
+ ulong regs = 0;
+ bcmsdh_info_t *sdh = NULL;
+#if !defined(BCMLXSDMMC) && defined(BCMPLATFORM_BUS)
+ struct platform_device *pdev;
+ struct resource *r;
+#endif /* BCMLXSDMMC */
+ int irq = 0;
+ uint32 vendevid;
+ unsigned long irq_flags = 0;
+
+#if !defined(BCMLXSDMMC) && defined(BCMPLATFORM_BUS)
+ pdev = to_platform_device(dev);
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!r || irq == NO_IRQ)
+ return -ENXIO;
+#endif /* BCMLXSDMMC */
+
+#if defined(OOB_INTR_ONLY)
+#ifdef HW_OOB
+ irq_flags = \
+ IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL | IORESOURCE_IRQ_SHAREABLE;
+#else
+ irq_flags = IRQF_TRIGGER_FALLING;
+#endif /* HW_OOB */
+ irq = dhd_customer_oob_irq_map(&irq_flags);
+ if (irq < 0) {
+ SDLX_MSG(("%s: Host irq is not defined\n", __FUNCTION__));
+ return 1;
+ }
+#endif /* defined(OOB_INTR_ONLY) */
+ /* allocate SDIO Host Controller state info */
+ if (!(osh = osl_attach(dev, PCI_BUS, FALSE))) {
+ SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
+ goto err;
+ }
+ if (!(sdhc = MALLOC(osh, sizeof(bcmsdh_hc_t)))) {
+ SDLX_MSG(("%s: out of memory, allocated %d bytes\n",
+ __FUNCTION__,
+ MALLOCED(osh)));
+ goto err;
+ }
+ bzero(sdhc, sizeof(bcmsdh_hc_t));
+ sdhc->osh = osh;
+
+ sdhc->dev = (void *)dev;
+
+#ifdef BCMLXSDMMC
+ if (!(sdh = bcmsdh_attach(osh, (void *)0,
+ (void **)®s, irq))) {
+ SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
+ goto err;
+ }
+#else
+ if (!(sdh = bcmsdh_attach(osh, (void *)r->start,
+ (void **)®s, irq))) {
+ SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
+ goto err;
+ }
+#endif /* BCMLXSDMMC */
+ sdhc->sdh = sdh;
+ sdhc->oob_irq = irq;
+ sdhc->oob_flags = irq_flags;
+ sdhc->oob_irq_registered = FALSE; /* to make sure.. */
+#if defined(OOB_INTR_ONLY)
+ spin_lock_init(&sdhc->irq_lock);
+#endif
+
+ /* chain SDIO Host Controller info together */
+ sdhc->next = sdhcinfo;
+ sdhcinfo = sdhc;
+ /* Read the vendor/device ID from the CIS */
+ vendevid = bcmsdh_query_device(sdh);
+
+ /* try to attach to the target device */
+ if (!(sdhc->ch = drvinfo.attach((vendevid >> 16),
+ (vendevid & 0xFFFF), 0, 0, 0, 0,
+ (void *)regs, NULL, sdh))) {
+ SDLX_MSG(("%s: device attach failed\n", __FUNCTION__));
+ goto err;
+ }
+
+ return 0;
+
+ /* error handling */
+err:
+ if (sdhc) {
+ if (sdhc->sdh)
+ bcmsdh_detach(sdhc->osh, sdhc->sdh);
+ MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
+ }
+ if (osh)
+ osl_detach(osh);
+ return -ENODEV;
+}
+
+#ifndef BCMLXSDMMC
+static
+#endif /* BCMLXSDMMC */
+int bcmsdh_remove(struct device *dev)
+{
+ bcmsdh_hc_t *sdhc, *prev;
+ osl_t *osh;
+
+ sdhc = sdhcinfo;
+ drvinfo.detach(sdhc->ch);
+ bcmsdh_detach(sdhc->osh, sdhc->sdh);
+ /* find the SDIO Host Controller state for this pdev and take it out from the list */
+ for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
+ if (sdhc->dev == (void *)dev) {
+ if (prev)
+ prev->next = sdhc->next;
+ else
+ sdhcinfo = NULL;
+ break;
+ }
+ prev = sdhc;
+ }
+ if (!sdhc) {
+ SDLX_MSG(("%s: failed\n", __FUNCTION__));
+ return 0;
+ }
+
+
+ /* release SDIO Host Controller info */
+ osh = sdhc->osh;
+ MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
+ osl_detach(osh);
+
+#if !defined(BCMLXSDMMC)
+ dev_set_drvdata(dev, NULL);
+#endif /* !defined(BCMLXSDMMC) */
+
+ return 0;
+}
+
+#else /* BCMPLATFORM_BUS */
+
+#if !defined(BCMLXSDMMC)
+/* forward declarations for PCI probe and remove functions. */
+static int __devinit bcmsdh_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void __devexit bcmsdh_pci_remove(struct pci_dev *pdev);
+
+/**
+ * pci id table
+ */
+static struct pci_device_id bcmsdh_pci_devid[] __devinitdata = {
+ { vendor: PCI_ANY_ID,
+ device: PCI_ANY_ID,
+ subvendor: PCI_ANY_ID,
+ subdevice: PCI_ANY_ID,
+ class: 0,
+ class_mask: 0,
+ driver_data: 0,
+ },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, bcmsdh_pci_devid);
+
+/**
+ * SDIO Host Controller pci driver info
+ */
+static struct pci_driver bcmsdh_pci_driver = {
+ node: {},
+ name: "bcmsdh",
+ id_table: bcmsdh_pci_devid,
+ probe: bcmsdh_pci_probe,
+ remove: bcmsdh_pci_remove,
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
+ save_state: NULL,
+#endif
+ suspend: NULL,
+ resume: NULL,
+};
+
+
+extern uint sd_pci_slot; /* Force detection to a particular PCI */
+ /* slot only . Allows for having multiple */
+ /* WL devices at once in a PC */
+ /* Only one instance of dhd will be */
+ /* usable at a time */
+ /* Upper word is bus number, */
+ /* lower word is slot number */
+ /* Default value of 0xFFFFffff turns this */
+ /* off */
+module_param(sd_pci_slot, uint, 0);
+
+
+/**
+ * Detect supported SDIO Host Controller and attach if found.
+ *
+ * Determine if the device described by pdev is a supported SDIO Host
+ * Controller. If so, attach to it and attach to the target device.
+ */
+static int __devinit
+bcmsdh_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ osl_t *osh = NULL;
+ bcmsdh_hc_t *sdhc = NULL;
+ ulong regs;
+ bcmsdh_info_t *sdh = NULL;
+ int rc;
+
+ if (sd_pci_slot != 0xFFFFffff) {
+ if (pdev->bus->number != (sd_pci_slot>>16) ||
+ PCI_SLOT(pdev->devfn) != (sd_pci_slot&0xffff)) {
+ SDLX_MSG(("%s: %s: bus %X, slot %X, vend %X, dev %X\n",
+ __FUNCTION__,
+ bcmsdh_chipmatch(pdev->vendor, pdev->device) ?
+ "Found compatible SDIOHC" :
+ "Probing unknown device",
+ pdev->bus->number, PCI_SLOT(pdev->devfn),
+ pdev->vendor, pdev->device));
+ return -ENODEV;
+ }
+ SDLX_MSG(("%s: %s: bus %X, slot %X, vendor %X, device %X (good PCI location)\n",
+ __FUNCTION__,
+ bcmsdh_chipmatch(pdev->vendor, pdev->device) ?
+ "Using compatible SDIOHC" :
+ "WARNING, forced use of unkown device",
+ pdev->bus->number, PCI_SLOT(pdev->devfn),
+ pdev->vendor, pdev->device));
+ }
+
+ if ((pdev->vendor == VENDOR_TI) && ((pdev->device == PCIXX21_FLASHMEDIA_ID) ||
+ (pdev->device == PCIXX21_FLASHMEDIA0_ID))) {
+ uint32 config_reg;
+
+ SDLX_MSG(("%s: Disabling TI FlashMedia Controller.\n", __FUNCTION__));
+ if (!(osh = osl_attach(pdev, PCI_BUS, FALSE))) {
+ SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
+ goto err;
+ }
+
+ config_reg = OSL_PCI_READ_CONFIG(osh, 0x4c, 4);
+
+ /*
+ * Set MMC_SD_DIS bit in FlashMedia Controller.
+ * Disbling the SD/MMC Controller in the FlashMedia Controller
+ * allows the Standard SD Host Controller to take over control
+ * of the SD Slot.
+ */
+ config_reg |= 0x02;
+ OSL_PCI_WRITE_CONFIG(osh, 0x4c, 4, config_reg);
+ osl_detach(osh);
+ }
+ /* match this pci device with what we support */
+ /* we can't solely rely on this to believe it is our SDIO Host Controller! */
+ if (!bcmsdh_chipmatch(pdev->vendor, pdev->device)) {
+ return -ENODEV;
+ }
+
+ /* this is a pci device we might support */
+ SDLX_MSG(("%s: Found possible SDIO Host Controller: bus %d slot %d func %d irq %d\n",
+ __FUNCTION__,
+ pdev->bus->number, PCI_SLOT(pdev->devfn),
+ PCI_FUNC(pdev->devfn), pdev->irq));
+
+ /* use bcmsdh_query_device() to get the vendor ID of the target device so
+ * it will eventually appear in the Broadcom string on the console
+ */
+
+ /* allocate SDIO Host Controller state info */
+ if (!(osh = osl_attach(pdev, PCI_BUS, FALSE))) {
+ SDLX_MSG(("%s: osl_attach failed\n", __FUNCTION__));
+ goto err;
+ }
+ if (!(sdhc = MALLOC(osh, sizeof(bcmsdh_hc_t)))) {
+ SDLX_MSG(("%s: out of memory, allocated %d bytes\n",
+ __FUNCTION__,
+ MALLOCED(osh)));
+ goto err;
+ }
+ bzero(sdhc, sizeof(bcmsdh_hc_t));
+ sdhc->osh = osh;
+
+ sdhc->dev = pdev;
+
+ /* map to address where host can access */
+ pci_set_master(pdev);
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ SDLX_MSG(("%s: Cannot enable PCI device\n", __FUNCTION__));
+ goto err;
+ }
+ if (!(sdh = bcmsdh_attach(osh, (void *)(uintptr)pci_resource_start(pdev, 0),
+ (void **)®s, pdev->irq))) {
+ SDLX_MSG(("%s: bcmsdh_attach failed\n", __FUNCTION__));
+ goto err;
+ }
+
+ sdhc->sdh = sdh;
+
+ /* try to attach to the target device */
+ if (!(sdhc->ch = drvinfo.attach(VENDOR_BROADCOM, /* pdev->vendor, */
+ bcmsdh_query_device(sdh) & 0xFFFF, 0, 0, 0, 0,
+ (void *)regs, NULL, sdh))) {
+ SDLX_MSG(("%s: device attach failed\n", __FUNCTION__));
+ goto err;
+ }
+
+ /* chain SDIO Host Controller info together */
+ sdhc->next = sdhcinfo;
+ sdhcinfo = sdhc;
+
+ return 0;
+
+ /* error handling */
+err:
+ if (sdhc->sdh)
+ bcmsdh_detach(sdhc->osh, sdhc->sdh);
+ if (sdhc)
+ MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
+ if (osh)
+ osl_detach(osh);
+ return -ENODEV;
+}
+
+
+/**
+ * Detach from target devices and SDIO Host Controller
+ */
+static void __devexit
+bcmsdh_pci_remove(struct pci_dev *pdev)
+{
+ bcmsdh_hc_t *sdhc, *prev;
+ osl_t *osh;
+
+ /* find the SDIO Host Controller state for this pdev and take it out from the list */
+ for (sdhc = sdhcinfo, prev = NULL; sdhc; sdhc = sdhc->next) {
+ if (sdhc->dev == pdev) {
+ if (prev)
+ prev->next = sdhc->next;
+ else
+ sdhcinfo = NULL;
+ break;
+ }
+ prev = sdhc;
+ }
+ if (!sdhc)
+ return;
+
+ drvinfo.detach(sdhc->ch);
+
+ bcmsdh_detach(sdhc->osh, sdhc->sdh);
+
+ /* release SDIO Host Controller info */
+ osh = sdhc->osh;
+ MFREE(osh, sdhc, sizeof(bcmsdh_hc_t));
+ osl_detach(osh);
+}
+#endif /* BCMLXSDMMC */
+#endif /* BCMPLATFORM_BUS */
+
+extern int sdio_function_init(void);
+
+int
+bcmsdh_register(bcmsdh_driver_t *driver)
+{
+ int error = 0;
+
+ drvinfo = *driver;
+
+#if defined(BCMPLATFORM_BUS)
+#if defined(BCMLXSDMMC)
+ SDLX_MSG(("Linux Kernel SDIO/MMC Driver\n"));
+ error = sdio_function_init();
+#else
+ SDLX_MSG(("Intel PXA270 SDIO Driver\n"));
+ error = driver_register(&bcmsdh_driver);
+#endif /* defined(BCMLXSDMMC) */
+ return error;
+#endif /* defined(BCMPLATFORM_BUS) */
+
+#if !defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
+ if (!(error = pci_module_init(&bcmsdh_pci_driver)))
+ return 0;
+#else
+ if (!(error = pci_register_driver(&bcmsdh_pci_driver)))
+ return 0;
+#endif
+
+ SDLX_MSG(("%s: pci_module_init failed 0x%x\n", __FUNCTION__, error));
+#endif /* BCMPLATFORM_BUS */
+
+ return error;
+}
+
+extern void sdio_function_cleanup(void);
+
+void
+bcmsdh_unregister(void)
+{
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
+ if (bcmsdh_pci_driver.node.next)
+#endif
+
+#if defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
+ driver_unregister(&bcmsdh_driver);
+#endif
+#if defined(BCMLXSDMMC)
+ sdio_function_cleanup();
+#endif /* BCMLXSDMMC */
+#if !defined(BCMPLATFORM_BUS) && !defined(BCMLXSDMMC)
+ pci_unregister_driver(&bcmsdh_pci_driver);
+#endif /* BCMPLATFORM_BUS */
+}
+
+#if defined(OOB_INTR_ONLY)
+void bcmsdh_oob_intr_set(bool enable)
+{
+ static bool curstate = 1;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sdhcinfo->irq_lock, flags);
+ if (curstate != enable) {
+ if (enable)
+ enable_irq(sdhcinfo->oob_irq);
+ else
+ disable_irq_nosync(sdhcinfo->oob_irq);
+ curstate = enable;
+ }
+ spin_unlock_irqrestore(&sdhcinfo->irq_lock, flags);
+}
+
+static irqreturn_t wlan_oob_irq(int irq, void *dev_id)
+{
+ dhd_pub_t *dhdp;
+
+ dhdp = (dhd_pub_t *)dev_get_drvdata(sdhcinfo->dev);
+
+ bcmsdh_oob_intr_set(0);
+
+ if (dhdp == NULL) {
+ SDLX_MSG(("Out of band GPIO interrupt fired way too early\n"));
+ return IRQ_HANDLED;
+ }
+
+ dhdsdio_isr((void *)dhdp->bus);
+
+ return IRQ_HANDLED;
+}
+
+int bcmsdh_register_oob_intr(void * dhdp)
+{
+ int error = 0;
+
+ SDLX_MSG(("%s Enter\n", __FUNCTION__));
+
+/* Example of HW_OOB for HW2: please refer to your host specifiction */
+/* sdhcinfo->oob_flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL | IORESOURCE_IRQ_SHAREABLE; */
+
+ dev_set_drvdata(sdhcinfo->dev, dhdp);
+
+ if (!sdhcinfo->oob_irq_registered) {
+ SDLX_MSG(("%s IRQ=%d Type=%X \n", __FUNCTION__, \
+ (int)sdhcinfo->oob_irq, (int)sdhcinfo->oob_flags));
+ /* Refer to customer Host IRQ docs about proper irqflags definition */
+ error = request_irq(sdhcinfo->oob_irq, wlan_oob_irq, sdhcinfo->oob_flags,
+ "bcmsdh_sdmmc", NULL);
+ if (error)
+ return -ENODEV;
+
+ set_irq_wake(sdhcinfo->oob_irq, 1);
+ sdhcinfo->oob_irq_registered = TRUE;
+ }
+
+ return 0;
+}
+
+void bcmsdh_unregister_oob_intr(void)
+{
+ SDLX_MSG(("%s: Enter\n", __FUNCTION__));
+
+ set_irq_wake(sdhcinfo->oob_irq, 0);
+ disable_irq(sdhcinfo->oob_irq); /* just in case.. */
+ free_irq(sdhcinfo->oob_irq, NULL);
+ sdhcinfo->oob_irq_registered = FALSE;
+}
+#endif /* defined(OOB_INTR_ONLY) */
+/* Module parameters specific to each host-controller driver */
+
+extern uint sd_msglevel; /* Debug message level */
+module_param(sd_msglevel, uint, 0);
+
+extern uint sd_power; /* 0 = SD Power OFF, 1 = SD Power ON. */
+module_param(sd_power, uint, 0);
+
+extern uint sd_clock; /* SD Clock Control, 0 = SD Clock OFF, 1 = SD Clock ON */
+module_param(sd_clock, uint, 0);
+
+extern uint sd_divisor; /* Divisor (-1 means external clock) */
+module_param(sd_divisor, uint, 0);
+
+extern uint sd_sdmode; /* Default is SD4, 0=SPI, 1=SD1, 2=SD4 */
+module_param(sd_sdmode, uint, 0);
+
+extern uint sd_hiok; /* Ok to use hi-speed mode */
+module_param(sd_hiok, uint, 0);
+
+extern uint sd_f2_blocksize;
+module_param(sd_f2_blocksize, int, 0);
+
+
+#ifdef BCMSDH_MODULE
+EXPORT_SYMBOL(bcmsdh_attach);
+EXPORT_SYMBOL(bcmsdh_detach);
+EXPORT_SYMBOL(bcmsdh_intr_query);
+EXPORT_SYMBOL(bcmsdh_intr_enable);
+EXPORT_SYMBOL(bcmsdh_intr_disable);
+EXPORT_SYMBOL(bcmsdh_intr_reg);
+EXPORT_SYMBOL(bcmsdh_intr_dereg);
+
+#if defined(DHD_DEBUG)
+EXPORT_SYMBOL(bcmsdh_intr_pending);
+#endif
+
+EXPORT_SYMBOL(bcmsdh_devremove_reg);
+EXPORT_SYMBOL(bcmsdh_cfg_read);
+EXPORT_SYMBOL(bcmsdh_cfg_write);
+EXPORT_SYMBOL(bcmsdh_cis_read);
+EXPORT_SYMBOL(bcmsdh_reg_read);
+EXPORT_SYMBOL(bcmsdh_reg_write);
+EXPORT_SYMBOL(bcmsdh_regfail);
+EXPORT_SYMBOL(bcmsdh_send_buf);
+EXPORT_SYMBOL(bcmsdh_recv_buf);
+
+EXPORT_SYMBOL(bcmsdh_rwdata);
+EXPORT_SYMBOL(bcmsdh_abort);
+EXPORT_SYMBOL(bcmsdh_query_device);
+EXPORT_SYMBOL(bcmsdh_query_iofnum);
+EXPORT_SYMBOL(bcmsdh_iovar_op);
+EXPORT_SYMBOL(bcmsdh_register);
+EXPORT_SYMBOL(bcmsdh_unregister);
+EXPORT_SYMBOL(bcmsdh_chipmatch);
+EXPORT_SYMBOL(bcmsdh_reset);
+
+EXPORT_SYMBOL(bcmsdh_get_dstatus);
+EXPORT_SYMBOL(bcmsdh_cfg_read_word);
+EXPORT_SYMBOL(bcmsdh_cfg_write_word);
+EXPORT_SYMBOL(bcmsdh_cur_sbwad);
+EXPORT_SYMBOL(bcmsdh_chipinfo);
+
+#endif /* BCMSDH_MODULE */
diff --git a/drivers/net/wireless/bcm4329/bcmsdh_sdmmc.c b/drivers/net/wireless/bcm4329/bcmsdh_sdmmc.c
new file mode 100644
index 0000000..031367b
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmsdh_sdmmc.c
@@ -0,0 +1,1304 @@
+/*
+ * BCMSDH Function Driver for the native SDIO/MMC driver in the Linux Kernel
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdh_sdmmc.c,v 1.1.2.5.6.30.4.1 2010/09/02 23:12:21 Exp $
+ */
+#include <typedefs.h>
+
+#include <bcmdevs.h>
+#include <bcmendian.h>
+#include <bcmutils.h>
+#include <osl.h>
+#include <sdio.h> /* SDIO Device and Protocol Specs */
+#include <sdioh.h> /* SDIO Host Controller Specification */
+#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */
+#include <sdiovar.h> /* ioctl/iovars */
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+
+#include <dngl_stats.h>
+#include <dhd.h>
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP)
+#include <linux/suspend.h>
+extern volatile bool dhd_mmc_suspend;
+#endif
+#include "bcmsdh_sdmmc.h"
+
+#ifndef BCMSDH_MODULE
+extern int sdio_function_init(void);
+extern void sdio_function_cleanup(void);
+#endif /* BCMSDH_MODULE */
+
+#if !defined(OOB_INTR_ONLY)
+static void IRQHandler(struct sdio_func *func);
+static void IRQHandlerF2(struct sdio_func *func);
+#endif /* !defined(OOB_INTR_ONLY) */
+static int sdioh_sdmmc_get_cisaddr(sdioh_info_t *sd, uint32 regaddr);
+extern int sdio_reset_comm(struct mmc_card *card);
+
+extern PBCMSDH_SDMMC_INSTANCE gInstance;
+
+uint sd_sdmode = SDIOH_MODE_SD4; /* Use SD4 mode by default */
+uint sd_f2_blocksize = 512; /* Default blocksize */
+
+uint sd_divisor = 2; /* Default 48MHz/2 = 24MHz */
+
+uint sd_power = 1; /* Default to SD Slot powered ON */
+uint sd_clock = 1; /* Default to SD Clock turned ON */
+uint sd_hiok = FALSE; /* Don't use hi-speed mode by default */
+uint sd_msglevel = 0x01;
+uint sd_use_dma = TRUE;
+DHD_PM_RESUME_WAIT_INIT(sdioh_request_byte_wait);
+DHD_PM_RESUME_WAIT_INIT(sdioh_request_word_wait);
+DHD_PM_RESUME_WAIT_INIT(sdioh_request_packet_wait);
+DHD_PM_RESUME_WAIT_INIT(sdioh_request_buffer_wait);
+
+#define DMA_ALIGN_MASK 0x03
+
+int sdioh_sdmmc_card_regread(sdioh_info_t *sd, int func, uint32 regaddr, int regsize, uint32 *data);
+
+static int
+sdioh_sdmmc_card_enablefuncs(sdioh_info_t *sd)
+{
+ int err_ret;
+ uint32 fbraddr;
+ uint8 func;
+
+ sd_trace(("%s\n", __FUNCTION__));
+
+ /* Get the Card's common CIS address */
+ sd->com_cis_ptr = sdioh_sdmmc_get_cisaddr(sd, SDIOD_CCCR_CISPTR_0);
+ sd->func_cis_ptr[0] = sd->com_cis_ptr;
+ sd_info(("%s: Card's Common CIS Ptr = 0x%x\n", __FUNCTION__, sd->com_cis_ptr));
+
+ /* Get the Card's function CIS (for each function) */
+ for (fbraddr = SDIOD_FBR_STARTADDR, func = 1;
+ func <= sd->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) {
+ sd->func_cis_ptr[func] = sdioh_sdmmc_get_cisaddr(sd, SDIOD_FBR_CISPTR_0 + fbraddr);
+ sd_info(("%s: Function %d CIS Ptr = 0x%x\n",
+ __FUNCTION__, func, sd->func_cis_ptr[func]));
+ }
+
+ sd->func_cis_ptr[0] = sd->com_cis_ptr;
+ sd_info(("%s: Card's Common CIS Ptr = 0x%x\n", __FUNCTION__, sd->com_cis_ptr));
+
+ /* Enable Function 1 */
+ sdio_claim_host(gInstance->func[1]);
+ err_ret = sdio_enable_func(gInstance->func[1]);
+ sdio_release_host(gInstance->func[1]);
+ if (err_ret) {
+ sd_err(("bcmsdh_sdmmc: Failed to enable F1 Err: 0x%08x", err_ret));
+ }
+
+ return FALSE;
+}
+
+/*
+ * Public entry points & extern's
+ */
+extern sdioh_info_t *
+sdioh_attach(osl_t *osh, void *bar0, uint irq)
+{
+ sdioh_info_t *sd;
+ int err_ret;
+
+ sd_trace(("%s\n", __FUNCTION__));
+
+ if (gInstance == NULL) {
+ sd_err(("%s: SDIO Device not present\n", __FUNCTION__));
+ return NULL;
+ }
+
+ if ((sd = (sdioh_info_t *)MALLOC(osh, sizeof(sdioh_info_t))) == NULL) {
+ sd_err(("sdioh_attach: out of memory, malloced %d bytes\n", MALLOCED(osh)));
+ return NULL;
+ }
+ bzero((char *)sd, sizeof(sdioh_info_t));
+ sd->osh = osh;
+ if (sdioh_sdmmc_osinit(sd) != 0) {
+ sd_err(("%s:sdioh_sdmmc_osinit() failed\n", __FUNCTION__));
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return NULL;
+ }
+
+ sd->num_funcs = 2;
+ sd->sd_blockmode = TRUE;
+ sd->use_client_ints = TRUE;
+ sd->client_block_size[0] = 64;
+
+ gInstance->sd = sd;
+
+ /* Claim host controller */
+ sdio_claim_host(gInstance->func[1]);
+
+ sd->client_block_size[1] = 64;
+ err_ret = sdio_set_block_size(gInstance->func[1], 64);
+ if (err_ret) {
+ sd_err(("bcmsdh_sdmmc: Failed to set F1 blocksize\n"));
+ }
+
+ /* Release host controller F1 */
+ sdio_release_host(gInstance->func[1]);
+
+ if (gInstance->func[2]) {
+ /* Claim host controller F2 */
+ sdio_claim_host(gInstance->func[2]);
+
+ sd->client_block_size[2] = sd_f2_blocksize;
+ err_ret = sdio_set_block_size(gInstance->func[2], sd_f2_blocksize);
+ if (err_ret) {
+ sd_err(("bcmsdh_sdmmc: Failed to set F2 blocksize to %d\n",
+ sd_f2_blocksize));
+ }
+
+ /* Release host controller F2 */
+ sdio_release_host(gInstance->func[2]);
+ }
+
+ sdioh_sdmmc_card_enablefuncs(sd);
+
+ sd_trace(("%s: Done\n", __FUNCTION__));
+ return sd;
+}
+
+
+extern SDIOH_API_RC
+sdioh_detach(osl_t *osh, sdioh_info_t *sd)
+{
+ sd_trace(("%s\n", __FUNCTION__));
+
+ if (sd) {
+
+ /* Disable Function 2 */
+ sdio_claim_host(gInstance->func[2]);
+ sdio_disable_func(gInstance->func[2]);
+ sdio_release_host(gInstance->func[2]);
+
+ /* Disable Function 1 */
+ sdio_claim_host(gInstance->func[1]);
+ sdio_disable_func(gInstance->func[1]);
+ sdio_release_host(gInstance->func[1]);
+
+ /* deregister irq */
+ sdioh_sdmmc_osfree(sd);
+
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ }
+ return SDIOH_API_RC_SUCCESS;
+}
+
+#if defined(OOB_INTR_ONLY) && defined(HW_OOB)
+
+extern SDIOH_API_RC
+sdioh_enable_func_intr(void)
+{
+ uint8 reg;
+ int err;
+
+ if (gInstance->func[0]) {
+ sdio_claim_host(gInstance->func[0]);
+
+ reg = sdio_readb(gInstance->func[0], SDIOD_CCCR_INTEN, &err);
+ if (err) {
+ sd_err(("%s: error for read SDIO_CCCR_IENx : 0x%x\n", __FUNCTION__, err));
+ sdio_release_host(gInstance->func[0]);
+ return SDIOH_API_RC_FAIL;
+ }
+
+ /* Enable F1 and F2 interrupts, set master enable */
+ reg |= (INTR_CTL_FUNC1_EN | INTR_CTL_FUNC2_EN | INTR_CTL_MASTER_EN);
+
+ sdio_writeb(gInstance->func[0], reg, SDIOD_CCCR_INTEN, &err);
+ sdio_release_host(gInstance->func[0]);
+
+ if (err) {
+ sd_err(("%s: error for write SDIO_CCCR_IENx : 0x%x\n", __FUNCTION__, err));
+ return SDIOH_API_RC_FAIL;
+ }
+ }
+
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_disable_func_intr(void)
+{
+ uint8 reg;
+ int err;
+
+ if (gInstance->func[0]) {
+ sdio_claim_host(gInstance->func[0]);
+ reg = sdio_readb(gInstance->func[0], SDIOD_CCCR_INTEN, &err);
+ if (err) {
+ sd_err(("%s: error for read SDIO_CCCR_IENx : 0x%x\n", __FUNCTION__, err));
+ sdio_release_host(gInstance->func[0]);
+ return SDIOH_API_RC_FAIL;
+ }
+
+ reg &= ~(INTR_CTL_FUNC1_EN | INTR_CTL_FUNC2_EN);
+ /* Disable master interrupt with the last function interrupt */
+ if (!(reg & 0xFE))
+ reg = 0;
+ sdio_writeb(gInstance->func[0], reg, SDIOD_CCCR_INTEN, &err);
+
+ sdio_release_host(gInstance->func[0]);
+ if (err) {
+ sd_err(("%s: error for write SDIO_CCCR_IENx : 0x%x\n", __FUNCTION__, err));
+ return SDIOH_API_RC_FAIL;
+ }
+ }
+ return SDIOH_API_RC_SUCCESS;
+}
+#endif /* defined(OOB_INTR_ONLY) && defined(HW_OOB) */
+
+/* Configure callback to client when we recieve client interrupt */
+extern SDIOH_API_RC
+sdioh_interrupt_register(sdioh_info_t *sd, sdioh_cb_fn_t fn, void *argh)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+ if (fn == NULL) {
+ sd_err(("%s: interrupt handler is NULL, not registering\n", __FUNCTION__));
+ return SDIOH_API_RC_FAIL;
+ }
+#if !defined(OOB_INTR_ONLY)
+ sd->intr_handler = fn;
+ sd->intr_handler_arg = argh;
+ sd->intr_handler_valid = TRUE;
+
+ /* register and unmask irq */
+ if (gInstance->func[2]) {
+ sdio_claim_host(gInstance->func[2]);
+ sdio_claim_irq(gInstance->func[2], IRQHandlerF2);
+ sdio_release_host(gInstance->func[2]);
+ }
+
+ if (gInstance->func[1]) {
+ sdio_claim_host(gInstance->func[1]);
+ sdio_claim_irq(gInstance->func[1], IRQHandler);
+ sdio_release_host(gInstance->func[1]);
+ }
+#elif defined(HW_OOB)
+ sdioh_enable_func_intr();
+#endif /* defined(OOB_INTR_ONLY) */
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_interrupt_deregister(sdioh_info_t *sd)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+
+#if !defined(OOB_INTR_ONLY)
+ if (gInstance->func[1]) {
+ /* register and unmask irq */
+ sdio_claim_host(gInstance->func[1]);
+ sdio_release_irq(gInstance->func[1]);
+ sdio_release_host(gInstance->func[1]);
+ }
+
+ if (gInstance->func[2]) {
+ /* Claim host controller F2 */
+ sdio_claim_host(gInstance->func[2]);
+ sdio_release_irq(gInstance->func[2]);
+ /* Release host controller F2 */
+ sdio_release_host(gInstance->func[2]);
+ }
+
+ sd->intr_handler_valid = FALSE;
+ sd->intr_handler = NULL;
+ sd->intr_handler_arg = NULL;
+#elif defined(HW_OOB)
+ sdioh_disable_func_intr();
+#endif /* !defined(OOB_INTR_ONLY) */
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_interrupt_query(sdioh_info_t *sd, bool *onoff)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+ *onoff = sd->client_intr_enabled;
+ return SDIOH_API_RC_SUCCESS;
+}
+
+#if defined(DHD_DEBUG)
+extern bool
+sdioh_interrupt_pending(sdioh_info_t *sd)
+{
+ return (0);
+}
+#endif
+
+uint
+sdioh_query_iofnum(sdioh_info_t *sd)
+{
+ return sd->num_funcs;
+}
+
+/* IOVar table */
+enum {
+ IOV_MSGLEVEL = 1,
+ IOV_BLOCKMODE,
+ IOV_BLOCKSIZE,
+ IOV_DMA,
+ IOV_USEINTS,
+ IOV_NUMINTS,
+ IOV_NUMLOCALINTS,
+ IOV_HOSTREG,
+ IOV_DEVREG,
+ IOV_DIVISOR,
+ IOV_SDMODE,
+ IOV_HISPEED,
+ IOV_HCIREGS,
+ IOV_POWER,
+ IOV_CLOCK,
+ IOV_RXCHAIN
+};
+
+const bcm_iovar_t sdioh_iovars[] = {
+ {"sd_msglevel", IOV_MSGLEVEL, 0, IOVT_UINT32, 0 },
+ {"sd_blockmode", IOV_BLOCKMODE, 0, IOVT_BOOL, 0 },
+ {"sd_blocksize", IOV_BLOCKSIZE, 0, IOVT_UINT32, 0 }, /* ((fn << 16) | size) */
+ {"sd_dma", IOV_DMA, 0, IOVT_BOOL, 0 },
+ {"sd_ints", IOV_USEINTS, 0, IOVT_BOOL, 0 },
+ {"sd_numints", IOV_NUMINTS, 0, IOVT_UINT32, 0 },
+ {"sd_numlocalints", IOV_NUMLOCALINTS, 0, IOVT_UINT32, 0 },
+ {"sd_hostreg", IOV_HOSTREG, 0, IOVT_BUFFER, sizeof(sdreg_t) },
+ {"sd_devreg", IOV_DEVREG, 0, IOVT_BUFFER, sizeof(sdreg_t) },
+ {"sd_divisor", IOV_DIVISOR, 0, IOVT_UINT32, 0 },
+ {"sd_power", IOV_POWER, 0, IOVT_UINT32, 0 },
+ {"sd_clock", IOV_CLOCK, 0, IOVT_UINT32, 0 },
+ {"sd_mode", IOV_SDMODE, 0, IOVT_UINT32, 100},
+ {"sd_highspeed", IOV_HISPEED, 0, IOVT_UINT32, 0 },
+ {"sd_rxchain", IOV_RXCHAIN, 0, IOVT_BOOL, 0 },
+ {NULL, 0, 0, 0, 0 }
+};
+
+int
+sdioh_iovar_op(sdioh_info_t *si, const char *name,
+ void *params, int plen, void *arg, int len, bool set)
+{
+ const bcm_iovar_t *vi = NULL;
+ int bcmerror = 0;
+ int val_size;
+ int32 int_val = 0;
+ bool bool_val;
+ uint32 actionid;
+
+ ASSERT(name);
+ ASSERT(len >= 0);
+
+ /* Get must have return space; Set does not take qualifiers */
+ ASSERT(set || (arg && len));
+ ASSERT(!set || (!params && !plen));
+
+ sd_trace(("%s: Enter (%s %s)\n", __FUNCTION__, (set ? "set" : "get"), name));
+
+ if ((vi = bcm_iovar_lookup(sdioh_iovars, name)) == NULL) {
+ bcmerror = BCME_UNSUPPORTED;
+ goto exit;
+ }
+
+ if ((bcmerror = bcm_iovar_lencheck(vi, arg, len, set)) != 0)
+ goto exit;
+
+ /* Set up params so get and set can share the convenience variables */
+ if (params == NULL) {
+ params = arg;
+ plen = len;
+ }
+
+ if (vi->type == IOVT_VOID)
+ val_size = 0;
+ else if (vi->type == IOVT_BUFFER)
+ val_size = len;
+ else
+ val_size = sizeof(int);
+
+ if (plen >= (int)sizeof(int_val))
+ bcopy(params, &int_val, sizeof(int_val));
+
+ bool_val = (int_val != 0) ? TRUE : FALSE;
+
+ actionid = set ? IOV_SVAL(vi->varid) : IOV_GVAL(vi->varid);
+ switch (actionid) {
+ case IOV_GVAL(IOV_MSGLEVEL):
+ int_val = (int32)sd_msglevel;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_MSGLEVEL):
+ sd_msglevel = int_val;
+ break;
+
+ case IOV_GVAL(IOV_BLOCKMODE):
+ int_val = (int32)si->sd_blockmode;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_BLOCKMODE):
+ si->sd_blockmode = (bool)int_val;
+ /* Haven't figured out how to make non-block mode with DMA */
+ break;
+
+ case IOV_GVAL(IOV_BLOCKSIZE):
+ if ((uint32)int_val > si->num_funcs) {
+ bcmerror = BCME_BADARG;
+ break;
+ }
+ int_val = (int32)si->client_block_size[int_val];
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_BLOCKSIZE):
+ {
+ uint func = ((uint32)int_val >> 16);
+ uint blksize = (uint16)int_val;
+ uint maxsize;
+
+ if (func > si->num_funcs) {
+ bcmerror = BCME_BADARG;
+ break;
+ }
+
+ switch (func) {
+ case 0: maxsize = 32; break;
+ case 1: maxsize = BLOCK_SIZE_4318; break;
+ case 2: maxsize = BLOCK_SIZE_4328; break;
+ default: maxsize = 0;
+ }
+ if (blksize > maxsize) {
+ bcmerror = BCME_BADARG;
+ break;
+ }
+ if (!blksize) {
+ blksize = maxsize;
+ }
+
+ /* Now set it */
+ si->client_block_size[func] = blksize;
+
+ break;
+ }
+
+ case IOV_GVAL(IOV_RXCHAIN):
+ int_val = FALSE;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_DMA):
+ int_val = (int32)si->sd_use_dma;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_DMA):
+ si->sd_use_dma = (bool)int_val;
+ break;
+
+ case IOV_GVAL(IOV_USEINTS):
+ int_val = (int32)si->use_client_ints;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_USEINTS):
+ si->use_client_ints = (bool)int_val;
+ if (si->use_client_ints)
+ si->intmask |= CLIENT_INTR;
+ else
+ si->intmask &= ~CLIENT_INTR;
+
+ break;
+
+ case IOV_GVAL(IOV_DIVISOR):
+ int_val = (uint32)sd_divisor;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_DIVISOR):
+ sd_divisor = int_val;
+ break;
+
+ case IOV_GVAL(IOV_POWER):
+ int_val = (uint32)sd_power;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_POWER):
+ sd_power = int_val;
+ break;
+
+ case IOV_GVAL(IOV_CLOCK):
+ int_val = (uint32)sd_clock;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_CLOCK):
+ sd_clock = int_val;
+ break;
+
+ case IOV_GVAL(IOV_SDMODE):
+ int_val = (uint32)sd_sdmode;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_SDMODE):
+ sd_sdmode = int_val;
+ break;
+
+ case IOV_GVAL(IOV_HISPEED):
+ int_val = (uint32)sd_hiok;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_HISPEED):
+ sd_hiok = int_val;
+ break;
+
+ case IOV_GVAL(IOV_NUMINTS):
+ int_val = (int32)si->intrcount;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_NUMLOCALINTS):
+ int_val = (int32)0;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_HOSTREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+
+ if (sd_ptr->offset < SD_SysAddr || sd_ptr->offset > SD_MaxCurCap) {
+ sd_err(("%s: bad offset 0x%x\n", __FUNCTION__, sd_ptr->offset));
+ bcmerror = BCME_BADARG;
+ break;
+ }
+
+ sd_trace(("%s: rreg%d at offset %d\n", __FUNCTION__,
+ (sd_ptr->offset & 1) ? 8 : ((sd_ptr->offset & 2) ? 16 : 32),
+ sd_ptr->offset));
+ if (sd_ptr->offset & 1)
+ int_val = 8; /* sdioh_sdmmc_rreg8(si, sd_ptr->offset); */
+ else if (sd_ptr->offset & 2)
+ int_val = 16; /* sdioh_sdmmc_rreg16(si, sd_ptr->offset); */
+ else
+ int_val = 32; /* sdioh_sdmmc_rreg(si, sd_ptr->offset); */
+
+ bcopy(&int_val, arg, sizeof(int_val));
+ break;
+ }
+
+ case IOV_SVAL(IOV_HOSTREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+
+ if (sd_ptr->offset < SD_SysAddr || sd_ptr->offset > SD_MaxCurCap) {
+ sd_err(("%s: bad offset 0x%x\n", __FUNCTION__, sd_ptr->offset));
+ bcmerror = BCME_BADARG;
+ break;
+ }
+
+ sd_trace(("%s: wreg%d value 0x%08x at offset %d\n", __FUNCTION__, sd_ptr->value,
+ (sd_ptr->offset & 1) ? 8 : ((sd_ptr->offset & 2) ? 16 : 32),
+ sd_ptr->offset));
+ break;
+ }
+
+ case IOV_GVAL(IOV_DEVREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+ uint8 data = 0;
+
+ if (sdioh_cfg_read(si, sd_ptr->func, sd_ptr->offset, &data)) {
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+
+ int_val = (int)data;
+ bcopy(&int_val, arg, sizeof(int_val));
+ break;
+ }
+
+ case IOV_SVAL(IOV_DEVREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+ uint8 data = (uint8)sd_ptr->value;
+
+ if (sdioh_cfg_write(si, sd_ptr->func, sd_ptr->offset, &data)) {
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+ break;
+ }
+
+ default:
+ bcmerror = BCME_UNSUPPORTED;
+ break;
+ }
+exit:
+
+ return bcmerror;
+}
+
+#if defined(OOB_INTR_ONLY) && defined(HW_OOB)
+
+SDIOH_API_RC
+sdioh_enable_hw_oob_intr(sdioh_info_t *sd, bool enable)
+{
+ SDIOH_API_RC status;
+ uint8 data;
+
+ if (enable)
+ data = 3; /* enable hw oob interrupt */
+ else
+ data = 4; /* disable hw oob interrupt */
+ data |= 4; /* Active HIGH */
+
+ status = sdioh_request_byte(sd, SDIOH_WRITE, 0, 0xf2, &data);
+ return status;
+}
+#endif /* defined(OOB_INTR_ONLY) && defined(HW_OOB) */
+
+extern SDIOH_API_RC
+sdioh_cfg_read(sdioh_info_t *sd, uint fnc_num, uint32 addr, uint8 *data)
+{
+ SDIOH_API_RC status;
+ /* No lock needed since sdioh_request_byte does locking */
+ status = sdioh_request_byte(sd, SDIOH_READ, fnc_num, addr, data);
+ return status;
+}
+
+extern SDIOH_API_RC
+sdioh_cfg_write(sdioh_info_t *sd, uint fnc_num, uint32 addr, uint8 *data)
+{
+ /* No lock needed since sdioh_request_byte does locking */
+ SDIOH_API_RC status;
+ status = sdioh_request_byte(sd, SDIOH_WRITE, fnc_num, addr, data);
+ return status;
+}
+
+static int
+sdioh_sdmmc_get_cisaddr(sdioh_info_t *sd, uint32 regaddr)
+{
+ /* read 24 bits and return valid 17 bit addr */
+ int i;
+ uint32 scratch, regdata;
+ uint8 *ptr = (uint8 *)&scratch;
+ for (i = 0; i < 3; i++) {
+ if ((sdioh_sdmmc_card_regread (sd, 0, regaddr, 1, ®data)) != SUCCESS)
+ sd_err(("%s: Can't read!\n", __FUNCTION__));
+
+ *ptr++ = (uint8) regdata;
+ regaddr++;
+ }
+
+ /* Only the lower 17-bits are valid */
+ scratch = ltoh32(scratch);
+ scratch &= 0x0001FFFF;
+ return (scratch);
+}
+
+extern SDIOH_API_RC
+sdioh_cis_read(sdioh_info_t *sd, uint func, uint8 *cisd, uint32 length)
+{
+ uint32 count;
+ int offset;
+ uint32 foo;
+ uint8 *cis = cisd;
+
+ sd_trace(("%s: Func = %d\n", __FUNCTION__, func));
+
+ if (!sd->func_cis_ptr[func]) {
+ bzero(cis, length);
+ sd_err(("%s: no func_cis_ptr[%d]\n", __FUNCTION__, func));
+ return SDIOH_API_RC_FAIL;
+ }
+
+ sd_err(("%s: func_cis_ptr[%d]=0x%04x\n", __FUNCTION__, func, sd->func_cis_ptr[func]));
+
+ for (count = 0; count < length; count++) {
+ offset = sd->func_cis_ptr[func] + count;
+ if (sdioh_sdmmc_card_regread (sd, 0, offset, 1, &foo) < 0) {
+ sd_err(("%s: regread failed: Can't read CIS\n", __FUNCTION__));
+ return SDIOH_API_RC_FAIL;
+ }
+
+ *cis = (uint8)(foo & 0xff);
+ cis++;
+ }
+
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_request_byte(sdioh_info_t *sd, uint rw, uint func, uint regaddr, uint8 *byte)
+{
+ int err_ret;
+
+ sd_info(("%s: rw=%d, func=%d, addr=0x%05x\n", __FUNCTION__, rw, func, regaddr));
+
+ DHD_PM_RESUME_WAIT(sdioh_request_byte_wait);
+ DHD_PM_RESUME_RETURN_ERROR(SDIOH_API_RC_FAIL);
+ if(rw) { /* CMD52 Write */
+ if (func == 0) {
+ /* Can only directly write to some F0 registers. Handle F2 enable
+ * as a special case.
+ */
+ if (regaddr == SDIOD_CCCR_IOEN) {
+ if (gInstance->func[2]) {
+ sdio_claim_host(gInstance->func[2]);
+ if (*byte & SDIO_FUNC_ENABLE_2) {
+ /* Enable Function 2 */
+ err_ret = sdio_enable_func(gInstance->func[2]);
+ if (err_ret) {
+ sd_err(("bcmsdh_sdmmc: enable F2 failed:%d",
+ err_ret));
+ }
+ } else {
+ /* Disable Function 2 */
+ err_ret = sdio_disable_func(gInstance->func[2]);
+ if (err_ret) {
+ sd_err(("bcmsdh_sdmmc: Disab F2 failed:%d",
+ err_ret));
+ }
+ }
+ sdio_release_host(gInstance->func[2]);
+ }
+ }
+#if defined(MMC_SDIO_ABORT)
+ /* to allow abort command through F1 */
+ else if (regaddr == SDIOD_CCCR_IOABORT) {
+ sdio_claim_host(gInstance->func[func]);
+ /*
+ * this sdio_f0_writeb() can be replaced with another api
+ * depending upon MMC driver change.
+ * As of this time, this is temporaray one
+ */
+ sdio_writeb(gInstance->func[func], *byte, regaddr, &err_ret);
+ sdio_release_host(gInstance->func[func]);
+ }
+#endif /* MMC_SDIO_ABORT */
+ else if (regaddr < 0xF0) {
+ sd_err(("bcmsdh_sdmmc: F0 Wr:0x%02x: write disallowed\n", regaddr));
+ } else {
+ /* Claim host controller, perform F0 write, and release */
+ sdio_claim_host(gInstance->func[func]);
+ sdio_f0_writeb(gInstance->func[func], *byte, regaddr, &err_ret);
+ sdio_release_host(gInstance->func[func]);
+ }
+ } else {
+ /* Claim host controller, perform Fn write, and release */
+ sdio_claim_host(gInstance->func[func]);
+ sdio_writeb(gInstance->func[func], *byte, regaddr, &err_ret);
+ sdio_release_host(gInstance->func[func]);
+ }
+ } else { /* CMD52 Read */
+ /* Claim host controller, perform Fn read, and release */
+ sdio_claim_host(gInstance->func[func]);
+
+ if (func == 0) {
+ *byte = sdio_f0_readb(gInstance->func[func], regaddr, &err_ret);
+ } else {
+ *byte = sdio_readb(gInstance->func[func], regaddr, &err_ret);
+ }
+
+ sdio_release_host(gInstance->func[func]);
+ }
+
+ if (err_ret) {
+ sd_err(("bcmsdh_sdmmc: Failed to %s byte F%d:@0x%05x=%02x, Err: %d\n",
+ rw ? "Write" : "Read", func, regaddr, *byte, err_ret));
+ }
+
+ return ((err_ret == 0) ? SDIOH_API_RC_SUCCESS : SDIOH_API_RC_FAIL);
+}
+
+extern SDIOH_API_RC
+sdioh_request_word(sdioh_info_t *sd, uint cmd_type, uint rw, uint func, uint addr,
+ uint32 *word, uint nbytes)
+{
+ int err_ret = SDIOH_API_RC_FAIL;
+
+ if (func == 0) {
+ sd_err(("%s: Only CMD52 allowed to F0.\n", __FUNCTION__));
+ return SDIOH_API_RC_FAIL;
+ }
+
+ sd_info(("%s: cmd_type=%d, rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
+ __FUNCTION__, cmd_type, rw, func, addr, nbytes));
+
+ DHD_PM_RESUME_WAIT(sdioh_request_word_wait);
+ DHD_PM_RESUME_RETURN_ERROR(SDIOH_API_RC_FAIL);
+ /* Claim host controller */
+ sdio_claim_host(gInstance->func[func]);
+
+ if(rw) { /* CMD52 Write */
+ if (nbytes == 4) {
+ sdio_writel(gInstance->func[func], *word, addr, &err_ret);
+ } else if (nbytes == 2) {
+ sdio_writew(gInstance->func[func], (*word & 0xFFFF), addr, &err_ret);
+ } else {
+ sd_err(("%s: Invalid nbytes: %d\n", __FUNCTION__, nbytes));
+ }
+ } else { /* CMD52 Read */
+ if (nbytes == 4) {
+ *word = sdio_readl(gInstance->func[func], addr, &err_ret);
+ } else if (nbytes == 2) {
+ *word = sdio_readw(gInstance->func[func], addr, &err_ret) & 0xFFFF;
+ } else {
+ sd_err(("%s: Invalid nbytes: %d\n", __FUNCTION__, nbytes));
+ }
+ }
+
+ /* Release host controller */
+ sdio_release_host(gInstance->func[func]);
+
+ if (err_ret) {
+ sd_err(("bcmsdh_sdmmc: Failed to %s word, Err: 0x%08x",
+ rw ? "Write" : "Read", err_ret));
+ }
+
+ return ((err_ret == 0) ? SDIOH_API_RC_SUCCESS : SDIOH_API_RC_FAIL);
+}
+
+static SDIOH_API_RC
+sdioh_request_packet(sdioh_info_t *sd, uint fix_inc, uint write, uint func,
+ uint addr, void *pkt)
+{
+ bool fifo = (fix_inc == SDIOH_DATA_FIX);
+ uint32 SGCount = 0;
+ int err_ret = 0;
+
+ void *pnext;
+
+ sd_trace(("%s: Enter\n", __FUNCTION__));
+
+ ASSERT(pkt);
+ DHD_PM_RESUME_WAIT(sdioh_request_packet_wait);
+ DHD_PM_RESUME_RETURN_ERROR(SDIOH_API_RC_FAIL);
+
+ /* Claim host controller */
+ sdio_claim_host(gInstance->func[func]);
+ for (pnext = pkt; pnext; pnext = PKTNEXT(sd->osh, pnext)) {
+ uint pkt_len = PKTLEN(sd->osh, pnext);
+ pkt_len += 3;
+ pkt_len &= 0xFFFFFFFC;
+
+#ifdef CONFIG_MMC_MSM7X00A
+ if ((pkt_len % 64) == 32) {
+ sd_trace(("%s: Rounding up TX packet +=32\n", __FUNCTION__));
+ pkt_len += 32;
+ }
+#endif /* CONFIG_MMC_MSM7X00A */
+ /* Make sure the packet is aligned properly. If it isn't, then this
+ * is the fault of sdioh_request_buffer() which is supposed to give
+ * us something we can work with.
+ */
+ ASSERT(((uint32)(PKTDATA(sd->osh, pkt)) & DMA_ALIGN_MASK) == 0);
+
+ if ((write) && (!fifo)) {
+ err_ret = sdio_memcpy_toio(gInstance->func[func], addr,
+ ((uint8*)PKTDATA(sd->osh, pnext)),
+ pkt_len);
+ } else if (write) {
+ err_ret = sdio_memcpy_toio(gInstance->func[func], addr,
+ ((uint8*)PKTDATA(sd->osh, pnext)),
+ pkt_len);
+ } else if (fifo) {
+ err_ret = sdio_readsb(gInstance->func[func],
+ ((uint8*)PKTDATA(sd->osh, pnext)),
+ addr,
+ pkt_len);
+ } else {
+ err_ret = sdio_memcpy_fromio(gInstance->func[func],
+ ((uint8*)PKTDATA(sd->osh, pnext)),
+ addr,
+ pkt_len);
+ }
+
+ if (err_ret) {
+ sd_err(("%s: %s FAILED %p[%d], addr=0x%05x, pkt_len=%d, ERR=0x%08x\n",
+ __FUNCTION__,
+ (write) ? "TX" : "RX",
+ pnext, SGCount, addr, pkt_len, err_ret));
+ } else {
+ sd_trace(("%s: %s xfr'd %p[%d], addr=0x%05x, len=%d\n",
+ __FUNCTION__,
+ (write) ? "TX" : "RX",
+ pnext, SGCount, addr, pkt_len));
+ }
+
+ if (!fifo) {
+ addr += pkt_len;
+ }
+ SGCount ++;
+
+ }
+
+ /* Release host controller */
+ sdio_release_host(gInstance->func[func]);
+
+ sd_trace(("%s: Exit\n", __FUNCTION__));
+ return ((err_ret == 0) ? SDIOH_API_RC_SUCCESS : SDIOH_API_RC_FAIL);
+}
+
+
+/*
+ * This function takes a buffer or packet, and fixes everything up so that in the
+ * end, a DMA-able packet is created.
+ *
+ * A buffer does not have an associated packet pointer, and may or may not be aligned.
+ * A packet may consist of a single packet, or a packet chain. If it is a packet chain,
+ * then all the packets in the chain must be properly aligned. If the packet data is not
+ * aligned, then there may only be one packet, and in this case, it is copied to a new
+ * aligned packet.
+ *
+ */
+extern SDIOH_API_RC
+sdioh_request_buffer(sdioh_info_t *sd, uint pio_dma, uint fix_inc, uint write, uint func,
+ uint addr, uint reg_width, uint buflen_u, uint8 *buffer, void *pkt)
+{
+ SDIOH_API_RC Status;
+ void *mypkt = NULL;
+
+ sd_trace(("%s: Enter\n", __FUNCTION__));
+
+ DHD_PM_RESUME_WAIT(sdioh_request_buffer_wait);
+ DHD_PM_RESUME_RETURN_ERROR(SDIOH_API_RC_FAIL);
+ /* Case 1: we don't have a packet. */
+ if (pkt == NULL) {
+ sd_data(("%s: Creating new %s Packet, len=%d\n",
+ __FUNCTION__, write ? "TX" : "RX", buflen_u));
+#ifdef DHD_USE_STATIC_BUF
+ if (!(mypkt = PKTGET_STATIC(sd->osh, buflen_u, write ? TRUE : FALSE))) {
+#else
+ if (!(mypkt = PKTGET(sd->osh, buflen_u, write ? TRUE : FALSE))) {
+#endif /* DHD_USE_STATIC_BUF */
+ sd_err(("%s: PKTGET failed: len %d\n",
+ __FUNCTION__, buflen_u));
+ return SDIOH_API_RC_FAIL;
+ }
+
+ /* For a write, copy the buffer data into the packet. */
+ if (write) {
+ bcopy(buffer, PKTDATA(sd->osh, mypkt), buflen_u);
+ }
+
+ Status = sdioh_request_packet(sd, fix_inc, write, func, addr, mypkt);
+
+ /* For a read, copy the packet data back to the buffer. */
+ if (!write) {
+ bcopy(PKTDATA(sd->osh, mypkt), buffer, buflen_u);
+ }
+#ifdef DHD_USE_STATIC_BUF
+ PKTFREE_STATIC(sd->osh, mypkt, write ? TRUE : FALSE);
+#else
+ PKTFREE(sd->osh, mypkt, write ? TRUE : FALSE);
+#endif /* DHD_USE_STATIC_BUF */
+ } else if (((uint32)(PKTDATA(sd->osh, pkt)) & DMA_ALIGN_MASK) != 0) {
+ /* Case 2: We have a packet, but it is unaligned. */
+
+ /* In this case, we cannot have a chain. */
+ ASSERT(PKTNEXT(sd->osh, pkt) == NULL);
+
+ sd_data(("%s: Creating aligned %s Packet, len=%d\n",
+ __FUNCTION__, write ? "TX" : "RX", PKTLEN(sd->osh, pkt)));
+#ifdef DHD_USE_STATIC_BUF
+ if (!(mypkt = PKTGET_STATIC(sd->osh, PKTLEN(sd->osh, pkt), write ? TRUE : FALSE))) {
+#else
+ if (!(mypkt = PKTGET(sd->osh, PKTLEN(sd->osh, pkt), write ? TRUE : FALSE))) {
+#endif /* DHD_USE_STATIC_BUF */
+ sd_err(("%s: PKTGET failed: len %d\n",
+ __FUNCTION__, PKTLEN(sd->osh, pkt)));
+ return SDIOH_API_RC_FAIL;
+ }
+
+ /* For a write, copy the buffer data into the packet. */
+ if (write) {
+ bcopy(PKTDATA(sd->osh, pkt),
+ PKTDATA(sd->osh, mypkt),
+ PKTLEN(sd->osh, pkt));
+ }
+
+ Status = sdioh_request_packet(sd, fix_inc, write, func, addr, mypkt);
+
+ /* For a read, copy the packet data back to the buffer. */
+ if (!write) {
+ bcopy(PKTDATA(sd->osh, mypkt),
+ PKTDATA(sd->osh, pkt),
+ PKTLEN(sd->osh, mypkt));
+ }
+#ifdef DHD_USE_STATIC_BUF
+ PKTFREE_STATIC(sd->osh, mypkt, write ? TRUE : FALSE);
+#else
+ PKTFREE(sd->osh, mypkt, write ? TRUE : FALSE);
+#endif /* DHD_USE_STATIC_BUF */
+ } else { /* case 3: We have a packet and it is aligned. */
+ sd_data(("%s: Aligned %s Packet, direct DMA\n",
+ __FUNCTION__, write ? "Tx" : "Rx"));
+ Status = sdioh_request_packet(sd, fix_inc, write, func, addr, pkt);
+ }
+
+ return (Status);
+}
+
+/* this function performs "abort" for both of host & device */
+extern int
+sdioh_abort(sdioh_info_t *sd, uint func)
+{
+#if defined(MMC_SDIO_ABORT)
+ char t_func = (char) func;
+#endif /* defined(MMC_SDIO_ABORT) */
+ sd_trace(("%s: Enter\n", __FUNCTION__));
+
+#if defined(MMC_SDIO_ABORT)
+ /* issue abort cmd52 command through F1 */
+ sdioh_request_byte(sd, SD_IO_OP_WRITE, SDIO_FUNC_0, SDIOD_CCCR_IOABORT, &t_func);
+#endif /* defined(MMC_SDIO_ABORT) */
+
+ sd_trace(("%s: Exit\n", __FUNCTION__));
+ return SDIOH_API_RC_SUCCESS;
+}
+
+/* Reset and re-initialize the device */
+int sdioh_sdio_reset(sdioh_info_t *si)
+{
+ sd_trace(("%s: Enter\n", __FUNCTION__));
+ sd_trace(("%s: Exit\n", __FUNCTION__));
+ return SDIOH_API_RC_SUCCESS;
+}
+
+/* Disable device interrupt */
+void
+sdioh_sdmmc_devintr_off(sdioh_info_t *sd)
+{
+ sd_trace(("%s: %d\n", __FUNCTION__, sd->use_client_ints));
+ sd->intmask &= ~CLIENT_INTR;
+}
+
+/* Enable device interrupt */
+void
+sdioh_sdmmc_devintr_on(sdioh_info_t *sd)
+{
+ sd_trace(("%s: %d\n", __FUNCTION__, sd->use_client_ints));
+ sd->intmask |= CLIENT_INTR;
+}
+
+/* Read client card reg */
+int
+sdioh_sdmmc_card_regread(sdioh_info_t *sd, int func, uint32 regaddr, int regsize, uint32 *data)
+{
+
+ if ((func == 0) || (regsize == 1)) {
+ uint8 temp = 0;
+
+ sdioh_request_byte(sd, SDIOH_READ, func, regaddr, &temp);
+ *data = temp;
+ *data &= 0xff;
+ sd_data(("%s: byte read data=0x%02x\n",
+ __FUNCTION__, *data));
+ } else {
+ sdioh_request_word(sd, 0, SDIOH_READ, func, regaddr, data, regsize);
+ if (regsize == 2)
+ *data &= 0xffff;
+
+ sd_data(("%s: word read data=0x%08x\n",
+ __FUNCTION__, *data));
+ }
+
+ return SUCCESS;
+}
+
+#if !defined(OOB_INTR_ONLY)
+/* bcmsdh_sdmmc interrupt handler */
+static void IRQHandler(struct sdio_func *func)
+{
+ sdioh_info_t *sd;
+
+ sd_trace(("bcmsdh_sdmmc: ***IRQHandler\n"));
+ sd = gInstance->sd;
+
+ ASSERT(sd != NULL);
+ sdio_release_host(gInstance->func[0]);
+
+ if (sd->use_client_ints) {
+ sd->intrcount++;
+ ASSERT(sd->intr_handler);
+ ASSERT(sd->intr_handler_arg);
+ (sd->intr_handler)(sd->intr_handler_arg);
+ } else {
+ sd_err(("bcmsdh_sdmmc: ***IRQHandler\n"));
+
+ sd_err(("%s: Not ready for intr: enabled %d, handler %p\n",
+ __FUNCTION__, sd->client_intr_enabled, sd->intr_handler));
+ }
+
+ sdio_claim_host(gInstance->func[0]);
+}
+
+/* bcmsdh_sdmmc interrupt handler for F2 (dummy handler) */
+static void IRQHandlerF2(struct sdio_func *func)
+{
+ sdioh_info_t *sd;
+
+ sd_trace(("bcmsdh_sdmmc: ***IRQHandlerF2\n"));
+
+ sd = gInstance->sd;
+
+ ASSERT(sd != NULL);
+}
+#endif /* !defined(OOB_INTR_ONLY) */
+
+#ifdef NOTUSED
+/* Write client card reg */
+static int
+sdioh_sdmmc_card_regwrite(sdioh_info_t *sd, int func, uint32 regaddr, int regsize, uint32 data)
+{
+
+ if ((func == 0) || (regsize == 1)) {
+ uint8 temp;
+
+ temp = data & 0xff;
+ sdioh_request_byte(sd, SDIOH_READ, func, regaddr, &temp);
+ sd_data(("%s: byte write data=0x%02x\n",
+ __FUNCTION__, data));
+ } else {
+ if (regsize == 2)
+ data &= 0xffff;
+
+ sdioh_request_word(sd, 0, SDIOH_READ, func, regaddr, &data, regsize);
+
+ sd_data(("%s: word write data=0x%08x\n",
+ __FUNCTION__, data));
+ }
+
+ return SUCCESS;
+}
+#endif /* NOTUSED */
+
+int
+sdioh_start(sdioh_info_t *si, int stage)
+{
+ int ret;
+ sdioh_info_t *sd = gInstance->sd;
+
+ /* Need to do this stages as we can't enable the interrupt till
+ downloading of the firmware is complete, other wise polling
+ sdio access will come in way
+ */
+ if (gInstance->func[0]) {
+ if (stage == 0) {
+ /* Since the power to the chip is killed, we will have
+ re enumerate the device again. Set the block size
+ and enable the fucntion 1 for in preparation for
+ downloading the code
+ */
+ /* sdio_reset_comm() - has been fixed in latest kernel/msm.git for Linux
+ 2.6.27. The implementation prior to that is buggy, and needs broadcom's
+ patch for it
+ */
+ if ((ret = sdio_reset_comm(gInstance->func[0]->card)))
+ sd_err(("%s Failed, error = %d\n", __FUNCTION__, ret));
+ else {
+ sd->num_funcs = 2;
+ sd->sd_blockmode = TRUE;
+ sd->use_client_ints = TRUE;
+ sd->client_block_size[0] = 64;
+
+ /* Claim host controller */
+ sdio_claim_host(gInstance->func[1]);
+
+ sd->client_block_size[1] = 64;
+ if (sdio_set_block_size(gInstance->func[1], 64)) {
+ sd_err(("bcmsdh_sdmmc: Failed to set F1 blocksize\n"));
+ }
+
+ /* Release host controller F1 */
+ sdio_release_host(gInstance->func[1]);
+
+ if (gInstance->func[2]) {
+ /* Claim host controller F2 */
+ sdio_claim_host(gInstance->func[2]);
+
+ sd->client_block_size[2] = sd_f2_blocksize;
+ if (sdio_set_block_size(gInstance->func[2],
+ sd_f2_blocksize)) {
+ sd_err(("bcmsdh_sdmmc: Failed to set F2 "
+ "blocksize to %d\n", sd_f2_blocksize));
+ }
+
+ /* Release host controller F2 */
+ sdio_release_host(gInstance->func[2]);
+ }
+
+ sdioh_sdmmc_card_enablefuncs(sd);
+ }
+ } else {
+#if !defined(OOB_INTR_ONLY)
+ sdio_claim_host(gInstance->func[0]);
+ sdio_claim_irq(gInstance->func[2], IRQHandlerF2);
+ sdio_claim_irq(gInstance->func[1], IRQHandler);
+ sdio_release_host(gInstance->func[0]);
+#else /* defined(OOB_INTR_ONLY) */
+#if defined(HW_OOB)
+ sdioh_enable_func_intr();
+#endif
+ bcmsdh_oob_intr_set(TRUE);
+#endif /* !defined(OOB_INTR_ONLY) */
+ }
+ }
+ else
+ sd_err(("%s Failed\n", __FUNCTION__));
+
+ return (0);
+}
+
+int
+sdioh_stop(sdioh_info_t *si)
+{
+ /* MSM7201A Android sdio stack has bug with interrupt
+ So internaly within SDIO stack they are polling
+ which cause issue when device is turned off. So
+ unregister interrupt with SDIO stack to stop the
+ polling
+ */
+ if (gInstance->func[0]) {
+#if !defined(OOB_INTR_ONLY)
+ sdio_claim_host(gInstance->func[0]);
+ sdio_release_irq(gInstance->func[1]);
+ sdio_release_irq(gInstance->func[2]);
+ sdio_release_host(gInstance->func[0]);
+#else /* defined(OOB_INTR_ONLY) */
+#if defined(HW_OOB)
+ sdioh_disable_func_intr();
+#endif
+ bcmsdh_oob_intr_set(FALSE);
+#endif /* !defined(OOB_INTR_ONLY) */
+ }
+ else
+ sd_err(("%s Failed\n", __FUNCTION__));
+ return (0);
+}
diff --git a/drivers/net/wireless/bcm4329/bcmsdh_sdmmc_linux.c b/drivers/net/wireless/bcm4329/bcmsdh_sdmmc_linux.c
new file mode 100644
index 0000000..8992a42
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmsdh_sdmmc_linux.c
@@ -0,0 +1,273 @@
+/*
+ * BCMSDH Function Driver for the native SDIO/MMC driver in the Linux Kernel
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdh_sdmmc_linux.c,v 1.1.2.5.6.17 2010/08/13 00:36:19 Exp $
+ */
+
+#include <typedefs.h>
+#include <bcmutils.h>
+#include <sdio.h> /* SDIO Specs */
+#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */
+#include <sdiovar.h> /* to get msglevel bit values */
+
+#include <linux/sched.h> /* request_irq() */
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+
+#if !defined(SDIO_VENDOR_ID_BROADCOM)
+#define SDIO_VENDOR_ID_BROADCOM 0x02d0
+#endif /* !defined(SDIO_VENDOR_ID_BROADCOM) */
+
+#define SDIO_DEVICE_ID_BROADCOM_DEFAULT 0x0000
+
+#if !defined(SDIO_DEVICE_ID_BROADCOM_4325_SDGWB)
+#define SDIO_DEVICE_ID_BROADCOM_4325_SDGWB 0x0492 /* BCM94325SDGWB */
+#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4325_SDGWB) */
+#if !defined(SDIO_DEVICE_ID_BROADCOM_4325)
+#define SDIO_DEVICE_ID_BROADCOM_4325 0x0493
+#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4325) */
+#if !defined(SDIO_DEVICE_ID_BROADCOM_4329)
+#define SDIO_DEVICE_ID_BROADCOM_4329 0x4329
+#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4329) */
+#if !defined(SDIO_DEVICE_ID_BROADCOM_4319)
+#define SDIO_DEVICE_ID_BROADCOM_4319 0x4319
+#endif /* !defined(SDIO_DEVICE_ID_BROADCOM_4329) */
+
+#include <bcmsdh_sdmmc.h>
+
+#include <dhd_dbg.h>
+
+extern void sdioh_sdmmc_devintr_off(sdioh_info_t *sd);
+extern void sdioh_sdmmc_devintr_on(sdioh_info_t *sd);
+
+int sdio_function_init(void);
+void sdio_function_cleanup(void);
+
+#define DESCRIPTION "bcmsdh_sdmmc Driver"
+#define AUTHOR "Broadcom Corporation"
+
+/* module param defaults */
+static int clockoverride = 0;
+
+module_param(clockoverride, int, 0644);
+MODULE_PARM_DESC(clockoverride, "SDIO card clock override");
+
+PBCMSDH_SDMMC_INSTANCE gInstance;
+
+/* Maximum number of bcmsdh_sdmmc devices supported by driver */
+#define BCMSDH_SDMMC_MAX_DEVICES 1
+
+extern int bcmsdh_probe(struct device *dev);
+extern int bcmsdh_remove(struct device *dev);
+struct device sdmmc_dev;
+
+static int bcmsdh_sdmmc_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ int ret = 0;
+ static struct sdio_func sdio_func_0;
+ sd_trace(("bcmsdh_sdmmc: %s Enter\n", __FUNCTION__));
+ sd_trace(("sdio_bcmsdh: func->class=%x\n", func->class));
+ sd_trace(("sdio_vendor: 0x%04x\n", func->vendor));
+ sd_trace(("sdio_device: 0x%04x\n", func->device));
+ sd_trace(("Function#: 0x%04x\n", func->num));
+
+ if (func->num == 1) {
+ sdio_func_0.num = 0;
+ sdio_func_0.card = func->card;
+ gInstance->func[0] = &sdio_func_0;
+ if(func->device == 0x4) { /* 4318 */
+ gInstance->func[2] = NULL;
+ sd_trace(("NIC found, calling bcmsdh_probe...\n"));
+ ret = bcmsdh_probe(&sdmmc_dev);
+ }
+ }
+
+ gInstance->func[func->num] = func;
+
+ if (func->num == 2) {
+ sd_trace(("F2 found, calling bcmsdh_probe...\n"));
+ ret = bcmsdh_probe(&sdmmc_dev);
+ }
+
+ return ret;
+}
+
+static void bcmsdh_sdmmc_remove(struct sdio_func *func)
+{
+ sd_trace(("bcmsdh_sdmmc: %s Enter\n", __FUNCTION__));
+ sd_info(("sdio_bcmsdh: func->class=%x\n", func->class));
+ sd_info(("sdio_vendor: 0x%04x\n", func->vendor));
+ sd_info(("sdio_device: 0x%04x\n", func->device));
+ sd_info(("Function#: 0x%04x\n", func->num));
+
+ if (func->num == 2) {
+ sd_trace(("F2 found, calling bcmsdh_remove...\n"));
+ bcmsdh_remove(&sdmmc_dev);
+ }
+}
+
+/* devices we support, null terminated */
+static const struct sdio_device_id bcmsdh_sdmmc_ids[] = {
+ { SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_DEFAULT) },
+ { SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4325_SDGWB) },
+ { SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4325) },
+ { SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329) },
+ { SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4319) },
+ { /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(sdio, bcmsdh_sdmmc_ids);
+
+static struct sdio_driver bcmsdh_sdmmc_driver = {
+ .probe = bcmsdh_sdmmc_probe,
+ .remove = bcmsdh_sdmmc_remove,
+ .name = "bcmsdh_sdmmc",
+ .id_table = bcmsdh_sdmmc_ids,
+ };
+
+struct sdos_info {
+ sdioh_info_t *sd;
+ spinlock_t lock;
+};
+
+
+int
+sdioh_sdmmc_osinit(sdioh_info_t *sd)
+{
+ struct sdos_info *sdos;
+
+ sdos = (struct sdos_info*)MALLOC(sd->osh, sizeof(struct sdos_info));
+ sd->sdos_info = (void*)sdos;
+ if (sdos == NULL)
+ return BCME_NOMEM;
+
+ sdos->sd = sd;
+ spin_lock_init(&sdos->lock);
+ return BCME_OK;
+}
+
+void
+sdioh_sdmmc_osfree(sdioh_info_t *sd)
+{
+ struct sdos_info *sdos;
+ ASSERT(sd && sd->sdos_info);
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ MFREE(sd->osh, sdos, sizeof(struct sdos_info));
+}
+
+/* Interrupt enable/disable */
+SDIOH_API_RC
+sdioh_interrupt_set(sdioh_info_t *sd, bool enable)
+{
+ ulong flags;
+ struct sdos_info *sdos;
+
+ sd_trace(("%s: %s\n", __FUNCTION__, enable ? "Enabling" : "Disabling"));
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ ASSERT(sdos);
+
+#if !defined(OOB_INTR_ONLY)
+ if (enable && !(sd->intr_handler && sd->intr_handler_arg)) {
+ sd_err(("%s: no handler registered, will not enable\n", __FUNCTION__));
+ return SDIOH_API_RC_FAIL;
+ }
+#endif /* !defined(OOB_INTR_ONLY) */
+
+ /* Ensure atomicity for enable/disable calls */
+ spin_lock_irqsave(&sdos->lock, flags);
+
+ sd->client_intr_enabled = enable;
+ if (enable) {
+ sdioh_sdmmc_devintr_on(sd);
+ } else {
+ sdioh_sdmmc_devintr_off(sd);
+ }
+
+ spin_unlock_irqrestore(&sdos->lock, flags);
+
+ return SDIOH_API_RC_SUCCESS;
+}
+
+
+#ifdef BCMSDH_MODULE
+static int __init
+bcmsdh_module_init(void)
+{
+ int error = 0;
+ sdio_function_init();
+ return error;
+}
+
+static void __exit
+bcmsdh_module_cleanup(void)
+{
+ sdio_function_cleanup();
+}
+
+module_init(bcmsdh_module_init);
+module_exit(bcmsdh_module_cleanup);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION(DESCRIPTION);
+MODULE_AUTHOR(AUTHOR);
+
+#endif /* BCMSDH_MODULE */
+/*
+ * module init
+*/
+int sdio_function_init(void)
+{
+ int error = 0;
+ sd_trace(("bcmsdh_sdmmc: %s Enter\n", __FUNCTION__));
+
+ gInstance = kzalloc(sizeof(BCMSDH_SDMMC_INSTANCE), GFP_KERNEL);
+ if (!gInstance)
+ return -ENOMEM;
+
+ bzero(&sdmmc_dev, sizeof(sdmmc_dev));
+ error = sdio_register_driver(&bcmsdh_sdmmc_driver);
+
+
+ return error;
+}
+
+/*
+ * module cleanup
+*/
+extern int bcmsdh_remove(struct device *dev);
+void sdio_function_cleanup(void)
+{
+ sd_trace(("%s Enter\n", __FUNCTION__));
+
+
+ sdio_unregister_driver(&bcmsdh_sdmmc_driver);
+
+ if (gInstance)
+ kfree(gInstance);
+}
diff --git a/drivers/net/wireless/bcm4329/bcmsdspi.c b/drivers/net/wireless/bcm4329/bcmsdspi.c
new file mode 100644
index 0000000..636539b
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmsdspi.c
@@ -0,0 +1,1596 @@
+/*
+ * Broadcom BCMSDH to SPI Protocol Conversion Layer
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdspi.c,v 1.14.4.2.4.4.6.5 2010/03/10 03:09:48 Exp $
+ */
+
+#include <typedefs.h>
+
+#include <bcmdevs.h>
+#include <bcmendian.h>
+#include <bcmutils.h>
+#include <osl.h>
+#include <siutils.h>
+#include <sdio.h> /* SDIO Device and Protocol Specs */
+#include <sdioh.h> /* SDIO Host Controller Specification */
+#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */
+#include <sdiovar.h> /* ioctl/iovars */
+
+#include <pcicfg.h>
+
+
+#include <bcmsdspi.h>
+#include <bcmspi.h>
+
+#include <proto/sdspi.h>
+
+#define SD_PAGE 4096
+
+/* Globals */
+
+uint sd_msglevel = SDH_ERROR_VAL;
+uint sd_hiok = FALSE; /* Use hi-speed mode if available? */
+uint sd_sdmode = SDIOH_MODE_SPI; /* Use SD4 mode by default */
+uint sd_f2_blocksize = 512; /* Default blocksize */
+
+uint sd_divisor = 2; /* Default 33MHz/2 = 16MHz for dongle */
+uint sd_power = 1; /* Default to SD Slot powered ON */
+uint sd_clock = 1; /* Default to SD Clock turned ON */
+uint sd_crc = 0; /* Default to SPI CRC Check turned OFF */
+uint sd_pci_slot = 0xFFFFffff; /* Used to force selection of a particular PCI slot */
+
+uint sd_toctl = 7;
+
+/* Prototypes */
+static bool sdspi_start_power(sdioh_info_t *sd);
+static int sdspi_set_highspeed_mode(sdioh_info_t *sd, bool HSMode);
+static int sdspi_card_enablefuncs(sdioh_info_t *sd);
+static void sdspi_cmd_getrsp(sdioh_info_t *sd, uint32 *rsp_buffer, int count);
+static int sdspi_cmd_issue(sdioh_info_t *sd, bool use_dma, uint32 cmd, uint32 arg,
+ uint32 *data, uint32 datalen);
+static int sdspi_card_regread(sdioh_info_t *sd, int func, uint32 regaddr,
+ int regsize, uint32 *data);
+static int sdspi_card_regwrite(sdioh_info_t *sd, int func, uint32 regaddr,
+ int regsize, uint32 data);
+static int sdspi_driver_init(sdioh_info_t *sd);
+static bool sdspi_reset(sdioh_info_t *sd, bool host_reset, bool client_reset);
+static int sdspi_card_buf(sdioh_info_t *sd, int rw, int func, bool fifo,
+ uint32 addr, int nbytes, uint32 *data);
+static int sdspi_abort(sdioh_info_t *sd, uint func);
+
+static int set_client_block_size(sdioh_info_t *sd, int func, int blocksize);
+
+static uint8 sdspi_crc7(unsigned char* p, uint32 len);
+static uint16 sdspi_crc16(unsigned char* p, uint32 len);
+static int sdspi_crc_onoff(sdioh_info_t *sd, bool use_crc);
+
+/*
+ * Public entry points & extern's
+ */
+extern sdioh_info_t *
+sdioh_attach(osl_t *osh, void *bar0, uint irq)
+{
+ sdioh_info_t *sd;
+
+ sd_trace(("%s\n", __FUNCTION__));
+ if ((sd = (sdioh_info_t *)MALLOC(osh, sizeof(sdioh_info_t))) == NULL) {
+ sd_err(("sdioh_attach: out of memory, malloced %d bytes\n", MALLOCED(osh)));
+ return NULL;
+ }
+ bzero((char *)sd, sizeof(sdioh_info_t));
+ sd->osh = osh;
+
+ if (spi_osinit(sd) != 0) {
+ sd_err(("%s: spi_osinit() failed\n", __FUNCTION__));
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return NULL;
+ }
+
+ sd->bar0 = (uintptr)bar0;
+ sd->irq = irq;
+ sd->intr_handler = NULL;
+ sd->intr_handler_arg = NULL;
+ sd->intr_handler_valid = FALSE;
+
+ /* Set defaults */
+ sd->sd_blockmode = FALSE;
+ sd->use_client_ints = TRUE;
+ sd->sd_use_dma = FALSE; /* DMA Not supported */
+
+ /* Haven't figured out how to make bytemode work with dma */
+ if (!sd->sd_blockmode)
+ sd->sd_use_dma = 0;
+
+ if (!spi_hw_attach(sd)) {
+ sd_err(("%s: spi_hw_attach() failed\n", __FUNCTION__));
+ spi_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return NULL;
+ }
+
+ if (sdspi_driver_init(sd) != SUCCESS) {
+ if (sdspi_driver_init(sd) != SUCCESS) {
+ sd_err(("%s:sdspi_driver_init() failed()\n", __FUNCTION__));
+ spi_hw_detach(sd);
+ spi_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return (NULL);
+ }
+ }
+
+ if (spi_register_irq(sd, irq) != SUCCESS) {
+ sd_err(("%s: spi_register_irq() failed for irq = %d\n", __FUNCTION__, irq));
+ spi_hw_detach(sd);
+ spi_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return (NULL);
+ }
+
+ sd_trace(("%s: Done\n", __FUNCTION__));
+ return sd;
+}
+
+extern SDIOH_API_RC
+sdioh_detach(osl_t *osh, sdioh_info_t *sd)
+{
+ sd_trace(("%s\n", __FUNCTION__));
+
+ if (sd) {
+ if (sd->card_init_done)
+ sdspi_reset(sd, 1, 1);
+
+ sd_info(("%s: detaching from hardware\n", __FUNCTION__));
+ spi_free_irq(sd->irq, sd);
+ spi_hw_detach(sd);
+ spi_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ }
+
+ return SDIOH_API_RC_SUCCESS;
+}
+
+/* Configure callback to client when we recieve client interrupt */
+extern SDIOH_API_RC
+sdioh_interrupt_register(sdioh_info_t *sd, sdioh_cb_fn_t fn, void *argh)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+
+ sd->intr_handler = fn;
+ sd->intr_handler_arg = argh;
+ sd->intr_handler_valid = TRUE;
+
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_interrupt_deregister(sdioh_info_t *sd)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+
+ sd->intr_handler_valid = FALSE;
+ sd->intr_handler = NULL;
+ sd->intr_handler_arg = NULL;
+
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_interrupt_query(sdioh_info_t *sd, bool *onoff)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+
+ *onoff = sd->client_intr_enabled;
+
+ return SDIOH_API_RC_SUCCESS;
+}
+
+#if defined(DHD_DEBUG)
+extern bool
+sdioh_interrupt_pending(sdioh_info_t *sd)
+{
+ return 0;
+}
+#endif
+
+uint
+sdioh_query_iofnum(sdioh_info_t *sd)
+{
+ return sd->num_funcs;
+}
+
+/* IOVar table */
+enum {
+ IOV_MSGLEVEL = 1,
+ IOV_BLOCKMODE,
+ IOV_BLOCKSIZE,
+ IOV_DMA,
+ IOV_USEINTS,
+ IOV_NUMINTS,
+ IOV_NUMLOCALINTS,
+ IOV_HOSTREG,
+ IOV_DEVREG,
+ IOV_DIVISOR,
+ IOV_SDMODE,
+ IOV_HISPEED,
+ IOV_HCIREGS,
+ IOV_POWER,
+ IOV_CLOCK,
+ IOV_CRC
+};
+
+const bcm_iovar_t sdioh_iovars[] = {
+ {"sd_msglevel", IOV_MSGLEVEL, 0, IOVT_UINT32, 0 },
+ {"sd_blockmode", IOV_BLOCKMODE, 0, IOVT_BOOL, 0 },
+ {"sd_blocksize", IOV_BLOCKSIZE, 0, IOVT_UINT32, 0 }, /* ((fn << 16) | size) */
+ {"sd_dma", IOV_DMA, 0, IOVT_BOOL, 0 },
+ {"sd_ints", IOV_USEINTS, 0, IOVT_BOOL, 0 },
+ {"sd_numints", IOV_NUMINTS, 0, IOVT_UINT32, 0 },
+ {"sd_numlocalints", IOV_NUMLOCALINTS, 0, IOVT_UINT32, 0 },
+ {"sd_hostreg", IOV_HOSTREG, 0, IOVT_BUFFER, sizeof(sdreg_t) },
+ {"sd_devreg", IOV_DEVREG, 0, IOVT_BUFFER, sizeof(sdreg_t) },
+ {"sd_divisor", IOV_DIVISOR, 0, IOVT_UINT32, 0 },
+ {"sd_power", IOV_POWER, 0, IOVT_UINT32, 0 },
+ {"sd_clock", IOV_CLOCK, 0, IOVT_UINT32, 0 },
+ {"sd_crc", IOV_CRC, 0, IOVT_UINT32, 0 },
+ {"sd_mode", IOV_SDMODE, 0, IOVT_UINT32, 100},
+ {"sd_highspeed", IOV_HISPEED, 0, IOVT_UINT32, 0},
+ {NULL, 0, 0, 0, 0 }
+};
+
+int
+sdioh_iovar_op(sdioh_info_t *si, const char *name,
+ void *params, int plen, void *arg, int len, bool set)
+{
+ const bcm_iovar_t *vi = NULL;
+ int bcmerror = 0;
+ int val_size;
+ int32 int_val = 0;
+ bool bool_val;
+ uint32 actionid;
+
+ ASSERT(name);
+ ASSERT(len >= 0);
+
+ /* Get must have return space; Set does not take qualifiers */
+ ASSERT(set || (arg && len));
+ ASSERT(!set || (!params && !plen));
+
+ sd_trace(("%s: Enter (%s %s)\n", __FUNCTION__, (set ? "set" : "get"), name));
+
+ if ((vi = bcm_iovar_lookup(sdioh_iovars, name)) == NULL) {
+ bcmerror = BCME_UNSUPPORTED;
+ goto exit;
+ }
+
+ if ((bcmerror = bcm_iovar_lencheck(vi, arg, len, set)) != 0)
+ goto exit;
+
+ /* Set up params so get and set can share the convenience variables */
+ if (params == NULL) {
+ params = arg;
+ plen = len;
+ }
+
+ if (vi->type == IOVT_VOID)
+ val_size = 0;
+ else if (vi->type == IOVT_BUFFER)
+ val_size = len;
+ else
+ val_size = sizeof(int);
+
+ if (plen >= (int)sizeof(int_val))
+ bcopy(params, &int_val, sizeof(int_val));
+
+ bool_val = (int_val != 0) ? TRUE : FALSE;
+
+ actionid = set ? IOV_SVAL(vi->varid) : IOV_GVAL(vi->varid);
+ switch (actionid) {
+ case IOV_GVAL(IOV_MSGLEVEL):
+ int_val = (int32)sd_msglevel;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_MSGLEVEL):
+ sd_msglevel = int_val;
+ break;
+
+ case IOV_GVAL(IOV_BLOCKMODE):
+ int_val = (int32)si->sd_blockmode;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_BLOCKMODE):
+ si->sd_blockmode = (bool)int_val;
+ /* Haven't figured out how to make non-block mode with DMA */
+ if (!si->sd_blockmode)
+ si->sd_use_dma = 0;
+ break;
+
+ case IOV_GVAL(IOV_BLOCKSIZE):
+ if ((uint32)int_val > si->num_funcs) {
+ bcmerror = BCME_BADARG;
+ break;
+ }
+ int_val = (int32)si->client_block_size[int_val];
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_BLOCKSIZE):
+ {
+ uint func = ((uint32)int_val >> 16);
+ uint blksize = (uint16)int_val;
+ uint maxsize;
+
+ if (func > si->num_funcs) {
+ bcmerror = BCME_BADARG;
+ break;
+ }
+
+ switch (func) {
+ case 0: maxsize = 32; break;
+ case 1: maxsize = BLOCK_SIZE_4318; break;
+ case 2: maxsize = BLOCK_SIZE_4328; break;
+ default: maxsize = 0;
+ }
+ if (blksize > maxsize) {
+ bcmerror = BCME_BADARG;
+ break;
+ }
+ if (!blksize) {
+ blksize = maxsize;
+ }
+
+ /* Now set it */
+ spi_lock(si);
+ bcmerror = set_client_block_size(si, func, blksize);
+ spi_unlock(si);
+ break;
+ }
+
+ case IOV_GVAL(IOV_DMA):
+ int_val = (int32)si->sd_use_dma;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_DMA):
+ si->sd_use_dma = (bool)int_val;
+ break;
+
+ case IOV_GVAL(IOV_USEINTS):
+ int_val = (int32)si->use_client_ints;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_USEINTS):
+ break;
+
+ case IOV_GVAL(IOV_DIVISOR):
+ int_val = (uint32)sd_divisor;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_DIVISOR):
+ sd_divisor = int_val;
+ if (!spi_start_clock(si, (uint16)sd_divisor)) {
+ sd_err(("set clock failed!\n"));
+ bcmerror = BCME_ERROR;
+ }
+ break;
+
+ case IOV_GVAL(IOV_POWER):
+ int_val = (uint32)sd_power;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_POWER):
+ sd_power = int_val;
+ break;
+
+ case IOV_GVAL(IOV_CLOCK):
+ int_val = (uint32)sd_clock;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_CLOCK):
+ sd_clock = int_val;
+ break;
+
+ case IOV_GVAL(IOV_CRC):
+ int_val = (uint32)sd_crc;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_CRC):
+ /* Apply new setting, but don't change sd_crc until
+ * after the CRC-mode is selected in the device. This
+ * is required because the software must generate a
+ * correct CRC for the CMD59 in order to be able to
+ * turn OFF the CRC.
+ */
+ sdspi_crc_onoff(si, int_val ? 1 : 0);
+ sd_crc = int_val;
+ break;
+
+ case IOV_GVAL(IOV_SDMODE):
+ int_val = (uint32)sd_sdmode;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_SDMODE):
+ sd_sdmode = int_val;
+ break;
+
+ case IOV_GVAL(IOV_HISPEED):
+ int_val = (uint32)sd_hiok;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_HISPEED):
+ sd_hiok = int_val;
+
+ if (!sdspi_set_highspeed_mode(si, (bool)sd_hiok)) {
+ sd_err(("Failed changing highspeed mode to %d.\n", sd_hiok));
+ bcmerror = BCME_ERROR;
+ return ERROR;
+ }
+ break;
+
+ case IOV_GVAL(IOV_NUMINTS):
+ int_val = (int32)si->intrcount;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_NUMLOCALINTS):
+ int_val = (int32)si->local_intrcount;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_HOSTREG):
+ {
+ break;
+ }
+
+ case IOV_SVAL(IOV_HOSTREG):
+ {
+ sd_err(("IOV_HOSTREG unsupported\n"));
+ break;
+ }
+
+ case IOV_GVAL(IOV_DEVREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+ uint8 data;
+
+ if (sdioh_cfg_read(si, sd_ptr->func, sd_ptr->offset, &data)) {
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+
+ int_val = (int)data;
+ bcopy(&int_val, arg, sizeof(int_val));
+ break;
+ }
+
+ case IOV_SVAL(IOV_DEVREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+ uint8 data = (uint8)sd_ptr->value;
+
+ if (sdioh_cfg_write(si, sd_ptr->func, sd_ptr->offset, &data)) {
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+ break;
+ }
+
+
+ default:
+ bcmerror = BCME_UNSUPPORTED;
+ break;
+ }
+exit:
+
+ return bcmerror;
+}
+
+extern SDIOH_API_RC
+sdioh_cfg_read(sdioh_info_t *sd, uint fnc_num, uint32 addr, uint8 *data)
+{
+ SDIOH_API_RC status;
+ /* No lock needed since sdioh_request_byte does locking */
+ status = sdioh_request_byte(sd, SDIOH_READ, fnc_num, addr, data);
+ return status;
+}
+
+extern SDIOH_API_RC
+sdioh_cfg_write(sdioh_info_t *sd, uint fnc_num, uint32 addr, uint8 *data)
+{
+ /* No lock needed since sdioh_request_byte does locking */
+ SDIOH_API_RC status;
+ status = sdioh_request_byte(sd, SDIOH_WRITE, fnc_num, addr, data);
+ return status;
+}
+
+extern SDIOH_API_RC
+sdioh_cis_read(sdioh_info_t *sd, uint func, uint8 *cisd, uint32 length)
+{
+ uint32 count;
+ int offset;
+ uint32 foo;
+ uint8 *cis = cisd;
+
+ sd_trace(("%s: Func = %d\n", __FUNCTION__, func));
+
+ if (!sd->func_cis_ptr[func]) {
+ bzero(cis, length);
+ return SDIOH_API_RC_FAIL;
+ }
+
+ spi_lock(sd);
+ *cis = 0;
+ for (count = 0; count < length; count++) {
+ offset = sd->func_cis_ptr[func] + count;
+ if (sdspi_card_regread (sd, 0, offset, 1, &foo) < 0) {
+ sd_err(("%s: regread failed: Can't read CIS\n", __FUNCTION__));
+ spi_unlock(sd);
+ return SDIOH_API_RC_FAIL;
+ }
+ *cis = (uint8)(foo & 0xff);
+ cis++;
+ }
+ spi_unlock(sd);
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_request_byte(sdioh_info_t *sd, uint rw, uint func, uint regaddr, uint8 *byte)
+{
+ int status;
+ uint32 cmd_arg;
+ uint32 rsp5;
+
+ spi_lock(sd);
+
+ cmd_arg = 0;
+ cmd_arg = SFIELD(cmd_arg, CMD52_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD52_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RW_FLAG, rw == SDIOH_READ ? 0 : 1);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RAW, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD52_DATA, rw == SDIOH_READ ? 0 : *byte);
+
+ sd_trace(("%s: rw=%d, func=%d, regaddr=0x%08x\n", __FUNCTION__, rw, func, regaddr));
+
+ if ((status = sdspi_cmd_issue(sd, sd->sd_use_dma,
+ SDIOH_CMD_52, cmd_arg, NULL, 0)) != SUCCESS) {
+ spi_unlock(sd);
+ return status;
+ }
+
+ sdspi_cmd_getrsp(sd, &rsp5, 1);
+ if (rsp5 != 0x00) {
+ sd_err(("%s: rsp5 flags is 0x%x func=%d\n",
+ __FUNCTION__, rsp5, func));
+ /* ASSERT(0); */
+ spi_unlock(sd);
+ return SDIOH_API_RC_FAIL;
+ }
+
+ if (rw == SDIOH_READ)
+ *byte = sd->card_rsp_data >> 24;
+
+ spi_unlock(sd);
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_request_word(sdioh_info_t *sd, uint cmd_type, uint rw, uint func, uint addr,
+ uint32 *word, uint nbytes)
+{
+ int status;
+
+ spi_lock(sd);
+
+ if (rw == SDIOH_READ)
+ status = sdspi_card_regread(sd, func, addr, nbytes, word);
+ else
+ status = sdspi_card_regwrite(sd, func, addr, nbytes, *word);
+
+ spi_unlock(sd);
+ return (status == SUCCESS ? SDIOH_API_RC_SUCCESS : SDIOH_API_RC_FAIL);
+}
+
+extern SDIOH_API_RC
+sdioh_request_buffer(sdioh_info_t *sd, uint pio_dma, uint fix_inc, uint rw, uint func,
+ uint addr, uint reg_width, uint buflen_u, uint8 *buffer, void *pkt)
+{
+ int len;
+ int buflen = (int)buflen_u;
+ bool fifo = (fix_inc == SDIOH_DATA_FIX);
+
+ spi_lock(sd);
+
+ ASSERT(reg_width == 4);
+ ASSERT(buflen_u < (1 << 30));
+ ASSERT(sd->client_block_size[func]);
+
+ sd_data(("%s: %c len %d r_cnt %d t_cnt %d, pkt @0x%p\n",
+ __FUNCTION__, rw == SDIOH_READ ? 'R' : 'W',
+ buflen_u, sd->r_cnt, sd->t_cnt, pkt));
+
+ /* Break buffer down into blocksize chunks:
+ * Bytemode: 1 block at a time.
+ */
+ while (buflen > 0) {
+ if (sd->sd_blockmode) {
+ /* Max xfer is Page size */
+ len = MIN(SD_PAGE, buflen);
+
+ /* Round down to a block boundry */
+ if (buflen > sd->client_block_size[func])
+ len = (len/sd->client_block_size[func]) *
+ sd->client_block_size[func];
+ } else {
+ /* Byte mode: One block at a time */
+ len = MIN(sd->client_block_size[func], buflen);
+ }
+
+ if (sdspi_card_buf(sd, rw, func, fifo, addr, len, (uint32 *)buffer) != SUCCESS) {
+ spi_unlock(sd);
+ return SDIOH_API_RC_FAIL;
+ }
+ buffer += len;
+ buflen -= len;
+ if (!fifo)
+ addr += len;
+ }
+ spi_unlock(sd);
+ return SDIOH_API_RC_SUCCESS;
+}
+
+static int
+sdspi_abort(sdioh_info_t *sd, uint func)
+{
+ uint8 spi_databuf[] = { 0x74, 0x80, 0x00, 0x0C, 0xFF, 0x95, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+ uint8 spi_rspbuf[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+ int err = 0;
+
+ sd_err(("Sending SPI Abort to F%d\n", func));
+ spi_databuf[4] = func & 0x7;
+ /* write to function 0, addr 6 (IOABORT) func # in 3 LSBs. */
+ spi_sendrecv(sd, spi_databuf, spi_rspbuf, sizeof(spi_databuf));
+
+ return err;
+}
+
+extern int
+sdioh_abort(sdioh_info_t *sd, uint fnum)
+{
+ int ret;
+
+ spi_lock(sd);
+ ret = sdspi_abort(sd, fnum);
+ spi_unlock(sd);
+
+ return ret;
+}
+
+int
+sdioh_start(sdioh_info_t *sd, int stage)
+{
+ return SUCCESS;
+}
+
+int
+sdioh_stop(sdioh_info_t *sd)
+{
+ return SUCCESS;
+}
+
+
+/*
+ * Private/Static work routines
+ */
+static bool
+sdspi_reset(sdioh_info_t *sd, bool host_reset, bool client_reset)
+{
+ if (!sd)
+ return TRUE;
+
+ spi_lock(sd);
+ /* Reset client card */
+ if (client_reset && (sd->adapter_slot != -1)) {
+ if (sdspi_card_regwrite(sd, 0, SDIOD_CCCR_IOABORT, 1, 0x8) != SUCCESS)
+ sd_err(("%s: Cannot write to card reg 0x%x\n",
+ __FUNCTION__, SDIOD_CCCR_IOABORT));
+ else
+ sd->card_rca = 0;
+ }
+
+ /* The host reset is a NOP in the sd-spi case. */
+ if (host_reset) {
+ sd->sd_mode = SDIOH_MODE_SPI;
+ }
+ spi_unlock(sd);
+ return TRUE;
+}
+
+static int
+sdspi_host_init(sdioh_info_t *sd)
+{
+ sdspi_reset(sd, 1, 0);
+
+ /* Default power on mode is SD1 */
+ sd->sd_mode = SDIOH_MODE_SPI;
+ sd->polled_mode = TRUE;
+ sd->host_init_done = TRUE;
+ sd->card_init_done = FALSE;
+ sd->adapter_slot = 1;
+
+ return (SUCCESS);
+}
+
+#define CMD0_RETRIES 3
+#define CMD5_RETRIES 10
+
+static int
+get_ocr(sdioh_info_t *sd, uint32 *cmd_arg, uint32 *cmd_rsp)
+{
+ uint32 rsp5;
+ int retries, status;
+
+ /* First issue a CMD0 to get the card into SPI mode. */
+ for (retries = 0; retries <= CMD0_RETRIES; retries++) {
+ if ((status = sdspi_cmd_issue(sd, sd->sd_use_dma,
+ SDIOH_CMD_0, *cmd_arg, NULL, 0)) != SUCCESS) {
+ sd_err(("%s: No response to CMD0\n", __FUNCTION__));
+ continue;
+ }
+
+ sdspi_cmd_getrsp(sd, &rsp5, 1);
+
+ if (GFIELD(rsp5, SPI_RSP_ILL_CMD)) {
+ printf("%s: Card already initialized (continuing)\n", __FUNCTION__);
+ break;
+ }
+
+ if (GFIELD(rsp5, SPI_RSP_IDLE)) {
+ printf("%s: Card in SPI mode\n", __FUNCTION__);
+ break;
+ }
+ }
+
+ if (retries > CMD0_RETRIES) {
+ sd_err(("%s: Too many retries for CMD0\n", __FUNCTION__));
+ return ERROR;
+ }
+
+ /* Get the Card's Operation Condition. */
+ /* Occasionally the board takes a while to become ready. */
+ for (retries = 0; retries <= CMD5_RETRIES; retries++) {
+ if ((status = sdspi_cmd_issue(sd, sd->sd_use_dma,
+ SDIOH_CMD_5, *cmd_arg, NULL, 0)) != SUCCESS) {
+ sd_err(("%s: No response to CMD5\n", __FUNCTION__));
+ continue;
+ }
+
+ printf("CMD5 response data was: 0x%08x\n", sd->card_rsp_data);
+
+ if (GFIELD(sd->card_rsp_data, RSP4_CARD_READY)) {
+ printf("%s: Card ready\n", __FUNCTION__);
+ break;
+ }
+ }
+
+ if (retries > CMD5_RETRIES) {
+ sd_err(("%s: Too many retries for CMD5\n", __FUNCTION__));
+ return ERROR;
+ }
+
+ *cmd_rsp = sd->card_rsp_data;
+
+ sdspi_crc_onoff(sd, sd_crc ? 1 : 0);
+
+ return (SUCCESS);
+}
+
+static int
+sdspi_crc_onoff(sdioh_info_t *sd, bool use_crc)
+{
+ uint32 args;
+ int status;
+
+ args = use_crc ? 1 : 0;
+ if ((status = sdspi_cmd_issue(sd, sd->sd_use_dma,
+ SDIOH_CMD_59, args, NULL, 0)) != SUCCESS) {
+ sd_err(("%s: No response to CMD59\n", __FUNCTION__));
+ }
+
+ sd_info(("CMD59 response data was: 0x%08x\n", sd->card_rsp_data));
+
+ sd_err(("SD-SPI CRC turned %s\n", use_crc ? "ON" : "OFF"));
+ return (SUCCESS);
+}
+
+static int
+sdspi_client_init(sdioh_info_t *sd)
+{
+ uint8 fn_ints;
+
+ sd_trace(("%s: Powering up slot %d\n", __FUNCTION__, sd->adapter_slot));
+
+ /* Start at ~400KHz clock rate for initialization */
+ if (!spi_start_clock(sd, 128)) {
+ sd_err(("spi_start_clock failed\n"));
+ return ERROR;
+ }
+
+ if (!sdspi_start_power(sd)) {
+ sd_err(("sdspi_start_power failed\n"));
+ return ERROR;
+ }
+
+ if (sd->num_funcs == 0) {
+ sd_err(("%s: No IO funcs!\n", __FUNCTION__));
+ return ERROR;
+ }
+
+ sdspi_card_enablefuncs(sd);
+
+ set_client_block_size(sd, 1, BLOCK_SIZE_4318);
+ fn_ints = INTR_CTL_FUNC1_EN;
+
+ if (sd->num_funcs >= 2) {
+ set_client_block_size(sd, 2, sd_f2_blocksize /* BLOCK_SIZE_4328 */);
+ fn_ints |= INTR_CTL_FUNC2_EN;
+ }
+
+ /* Enable/Disable Client interrupts */
+ /* Turn on here but disable at host controller */
+ if (sdspi_card_regwrite(sd, 0, SDIOD_CCCR_INTEN, 1,
+ (fn_ints | INTR_CTL_MASTER_EN)) != SUCCESS) {
+ sd_err(("%s: Could not enable ints in CCCR\n", __FUNCTION__));
+ return ERROR;
+ }
+
+ /* Switch to High-speed clocking mode if both host and device support it */
+ sdspi_set_highspeed_mode(sd, (bool)sd_hiok);
+
+ /* After configuring for High-Speed mode, set the desired clock rate. */
+ if (!spi_start_clock(sd, (uint16)sd_divisor)) {
+ sd_err(("spi_start_clock failed\n"));
+ return ERROR;
+ }
+
+ sd->card_init_done = TRUE;
+
+ return SUCCESS;
+}
+
+static int
+sdspi_set_highspeed_mode(sdioh_info_t *sd, bool HSMode)
+{
+ uint32 regdata;
+ int status;
+ bool hsmode;
+
+ if (HSMode == TRUE) {
+
+ sd_err(("Attempting to enable High-Speed mode.\n"));
+
+ if ((status = sdspi_card_regread(sd, 0, SDIOD_CCCR_SPEED_CONTROL,
+ 1, ®data)) != SUCCESS) {
+ return status;
+ }
+ if (regdata & SDIO_SPEED_SHS) {
+ sd_err(("Device supports High-Speed mode.\n"));
+
+ regdata |= SDIO_SPEED_EHS;
+
+ sd_err(("Writing %08x to Card at %08x\n",
+ regdata, SDIOD_CCCR_SPEED_CONTROL));
+ if ((status = sdspi_card_regwrite(sd, 0, SDIOD_CCCR_SPEED_CONTROL,
+ 1, regdata)) != BCME_OK) {
+ return status;
+ }
+
+ hsmode = 1;
+
+ sd_err(("High-speed clocking mode enabled.\n"));
+ }
+ else {
+ sd_err(("Device does not support High-Speed Mode.\n"));
+ hsmode = 0;
+ }
+ } else {
+ if ((status = sdspi_card_regread(sd, 0, SDIOD_CCCR_SPEED_CONTROL,
+ 1, ®data)) != SUCCESS) {
+ return status;
+ }
+
+ regdata = ~SDIO_SPEED_EHS;
+
+ sd_err(("Writing %08x to Card at %08x\n",
+ regdata, SDIOD_CCCR_SPEED_CONTROL));
+ if ((status = sdspi_card_regwrite(sd, 0, SDIOD_CCCR_SPEED_CONTROL,
+ 1, regdata)) != BCME_OK) {
+ return status;
+ }
+
+ sd_err(("Low-speed clocking mode enabled.\n"));
+ hsmode = 0;
+ }
+
+ spi_controller_highspeed_mode(sd, hsmode);
+
+ return TRUE;
+}
+
+bool
+sdspi_start_power(sdioh_info_t *sd)
+{
+ uint32 cmd_arg;
+ uint32 cmd_rsp;
+
+ sd_trace(("%s\n", __FUNCTION__));
+
+ /* Get the Card's Operation Condition. Occasionally the board
+ * takes a while to become ready
+ */
+
+ cmd_arg = 0;
+ if (get_ocr(sd, &cmd_arg, &cmd_rsp) != SUCCESS) {
+ sd_err(("%s: Failed to get OCR; bailing\n", __FUNCTION__));
+ return FALSE;
+ }
+
+ sd_err(("mem_present = %d\n", GFIELD(cmd_rsp, RSP4_MEM_PRESENT)));
+ sd_err(("num_funcs = %d\n", GFIELD(cmd_rsp, RSP4_NUM_FUNCS)));
+ sd_err(("card_ready = %d\n", GFIELD(cmd_rsp, RSP4_CARD_READY)));
+ sd_err(("OCR = 0x%x\n", GFIELD(cmd_rsp, RSP4_IO_OCR)));
+
+ /* Verify that the card supports I/O mode */
+ if (GFIELD(cmd_rsp, RSP4_NUM_FUNCS) == 0) {
+ sd_err(("%s: Card does not support I/O\n", __FUNCTION__));
+ return ERROR;
+ }
+
+ sd->num_funcs = GFIELD(cmd_rsp, RSP4_NUM_FUNCS);
+
+ /* Examine voltage: Arasan only supports 3.3 volts,
+ * so look for 3.2-3.3 Volts and also 3.3-3.4 volts.
+ */
+
+ if ((GFIELD(cmd_rsp, RSP4_IO_OCR) & (0x3 << 20)) == 0) {
+ sd_err(("This client does not support 3.3 volts!\n"));
+ return ERROR;
+ }
+
+
+ return TRUE;
+}
+
+static int
+sdspi_driver_init(sdioh_info_t *sd)
+{
+ sd_trace(("%s\n", __FUNCTION__));
+
+ if ((sdspi_host_init(sd)) != SUCCESS) {
+ return ERROR;
+ }
+
+ if (sdspi_client_init(sd) != SUCCESS) {
+ return ERROR;
+ }
+
+ return SUCCESS;
+}
+
+static int
+sdspi_card_enablefuncs(sdioh_info_t *sd)
+{
+ int status;
+ uint32 regdata;
+ uint32 regaddr, fbraddr;
+ uint8 func;
+ uint8 *ptr;
+
+ sd_trace(("%s\n", __FUNCTION__));
+ /* Get the Card's common CIS address */
+ ptr = (uint8 *) &sd->com_cis_ptr;
+ for (regaddr = SDIOD_CCCR_CISPTR_0; regaddr <= SDIOD_CCCR_CISPTR_2; regaddr++) {
+ if ((status = sdspi_card_regread (sd, 0, regaddr, 1, ®data)) != SUCCESS)
+ return status;
+
+ *ptr++ = (uint8) regdata;
+ }
+
+ /* Only the lower 17-bits are valid */
+ sd->com_cis_ptr &= 0x0001FFFF;
+ sd->func_cis_ptr[0] = sd->com_cis_ptr;
+ sd_info(("%s: Card's Common CIS Ptr = 0x%x\n", __FUNCTION__, sd->com_cis_ptr));
+
+ /* Get the Card's function CIS (for each function) */
+ for (fbraddr = SDIOD_FBR_STARTADDR, func = 1;
+ func <= sd->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) {
+ ptr = (uint8 *) &sd->func_cis_ptr[func];
+ for (regaddr = SDIOD_FBR_CISPTR_0; regaddr <= SDIOD_FBR_CISPTR_2; regaddr++) {
+ if ((status = sdspi_card_regread (sd, 0, regaddr + fbraddr, 1, ®data))
+ != SUCCESS)
+ return status;
+
+ *ptr++ = (uint8) regdata;
+ }
+
+ /* Only the lower 17-bits are valid */
+ sd->func_cis_ptr[func] &= 0x0001FFFF;
+ sd_info(("%s: Function %d CIS Ptr = 0x%x\n",
+ __FUNCTION__, func, sd->func_cis_ptr[func]));
+ }
+
+ sd_info(("%s: write ESCI bit\n", __FUNCTION__));
+ /* Enable continuous SPI interrupt (ESCI bit) */
+ sdspi_card_regwrite(sd, 0, SDIOD_CCCR_BICTRL, 1, 0x60);
+
+ sd_info(("%s: enable f1\n", __FUNCTION__));
+ /* Enable function 1 on the card */
+ regdata = SDIO_FUNC_ENABLE_1;
+ if ((status = sdspi_card_regwrite(sd, 0, SDIOD_CCCR_IOEN, 1, regdata)) != SUCCESS)
+ return status;
+
+ sd_info(("%s: done\n", __FUNCTION__));
+ return SUCCESS;
+}
+
+/* Read client card reg */
+static int
+sdspi_card_regread(sdioh_info_t *sd, int func, uint32 regaddr, int regsize, uint32 *data)
+{
+ int status;
+ uint32 cmd_arg;
+ uint32 rsp5;
+
+ cmd_arg = 0;
+
+ if ((func == 0) || (regsize == 1)) {
+ cmd_arg = SFIELD(cmd_arg, CMD52_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD52_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RW_FLAG, SDIOH_XFER_TYPE_READ);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RAW, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD52_DATA, 0);
+
+ if ((status = sdspi_cmd_issue(sd, sd->sd_use_dma, SDIOH_CMD_52, cmd_arg, NULL, 0))
+ != SUCCESS)
+ return status;
+
+ sdspi_cmd_getrsp(sd, &rsp5, 1);
+
+ if (rsp5 != 0x00)
+ sd_err(("%s: rsp5 flags is 0x%x\t %d\n",
+ __FUNCTION__, rsp5, func));
+
+ *data = sd->card_rsp_data >> 24;
+ } else {
+ cmd_arg = SFIELD(cmd_arg, CMD53_BYTE_BLK_CNT, regsize);
+ cmd_arg = SFIELD(cmd_arg, CMD53_OP_CODE, 1);
+ cmd_arg = SFIELD(cmd_arg, CMD53_BLK_MODE, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD53_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD53_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, CMD53_RW_FLAG, SDIOH_XFER_TYPE_READ);
+
+ sd->data_xfer_count = regsize;
+
+ /* sdspi_cmd_issue() returns with the command complete bit
+ * in the ISR already cleared
+ */
+ if ((status = sdspi_cmd_issue(sd, sd->sd_use_dma, SDIOH_CMD_53, cmd_arg, NULL, 0))
+ != SUCCESS)
+ return status;
+
+ sdspi_cmd_getrsp(sd, &rsp5, 1);
+
+ if (rsp5 != 0x00)
+ sd_err(("%s: rsp5 flags is 0x%x\t %d\n",
+ __FUNCTION__, rsp5, func));
+
+ *data = sd->card_rsp_data;
+ if (regsize == 2) {
+ *data &= 0xffff;
+ }
+
+ sd_info(("%s: CMD53 func %d, addr 0x%x, size %d, data 0x%08x\n",
+ __FUNCTION__, func, regaddr, regsize, *data));
+
+
+ }
+
+ return SUCCESS;
+}
+
+/* write a client register */
+static int
+sdspi_card_regwrite(sdioh_info_t *sd, int func, uint32 regaddr, int regsize, uint32 data)
+{
+ int status;
+ uint32 cmd_arg, rsp5, flags;
+
+ cmd_arg = 0;
+
+ if ((func == 0) || (regsize == 1)) {
+ cmd_arg = SFIELD(cmd_arg, CMD52_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD52_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RW_FLAG, SDIOH_XFER_TYPE_WRITE);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RAW, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD52_DATA, data & 0xff);
+ if ((status = sdspi_cmd_issue(sd, sd->sd_use_dma, SDIOH_CMD_52, cmd_arg, NULL, 0))
+ != SUCCESS)
+ return status;
+
+ sdspi_cmd_getrsp(sd, &rsp5, 1);
+ flags = GFIELD(rsp5, RSP5_FLAGS);
+ if (flags && (flags != 0x10))
+ sd_err(("%s: rsp5.rsp5.flags = 0x%x, expecting 0x10\n",
+ __FUNCTION__, flags));
+ }
+ else {
+ cmd_arg = SFIELD(cmd_arg, CMD53_BYTE_BLK_CNT, regsize);
+ cmd_arg = SFIELD(cmd_arg, CMD53_OP_CODE, 1);
+ cmd_arg = SFIELD(cmd_arg, CMD53_BLK_MODE, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD53_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD53_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, CMD53_RW_FLAG, SDIOH_XFER_TYPE_WRITE);
+
+ sd->data_xfer_count = regsize;
+ sd->cmd53_wr_data = data;
+
+ sd_info(("%s: CMD53 func %d, addr 0x%x, size %d, data 0x%08x\n",
+ __FUNCTION__, func, regaddr, regsize, data));
+
+ /* sdspi_cmd_issue() returns with the command complete bit
+ * in the ISR already cleared
+ */
+ if ((status = sdspi_cmd_issue(sd, sd->sd_use_dma, SDIOH_CMD_53, cmd_arg, NULL, 0))
+ != SUCCESS)
+ return status;
+
+ sdspi_cmd_getrsp(sd, &rsp5, 1);
+
+ if (rsp5 != 0x00)
+ sd_err(("%s: rsp5 flags = 0x%x, expecting 0x00\n",
+ __FUNCTION__, rsp5));
+
+ }
+ return SUCCESS;
+}
+
+void
+sdspi_cmd_getrsp(sdioh_info_t *sd, uint32 *rsp_buffer, int count /* num 32 bit words */)
+{
+ *rsp_buffer = sd->card_response;
+}
+
+int max_errors = 0;
+
+#define SPI_MAX_PKT_LEN 768
+uint8 spi_databuf[SPI_MAX_PKT_LEN];
+uint8 spi_rspbuf[SPI_MAX_PKT_LEN];
+
+/* datalen is used for CMD53 length only (0 for sd->data_xfer_count) */
+static int
+sdspi_cmd_issue(sdioh_info_t *sd, bool use_dma, uint32 cmd, uint32 arg,
+ uint32 *data, uint32 datalen)
+{
+ uint32 cmd_reg;
+ uint32 cmd_arg = arg;
+ uint8 cmd_crc = 0x95; /* correct CRC for CMD0 and don't care for others. */
+ uint16 dat_crc;
+ uint8 cmd52data = 0;
+ uint32 i, j;
+ uint32 spi_datalen = 0;
+ uint32 spi_pre_cmd_pad = 0;
+ uint32 spi_max_response_pad = 128;
+
+ cmd_reg = 0;
+ cmd_reg = SFIELD(cmd_reg, SPI_DIR, 1);
+ cmd_reg = SFIELD(cmd_reg, SPI_CMD_INDEX, cmd);
+
+ if (GFIELD(cmd_arg, CMD52_RW_FLAG) == 1) { /* Same for CMD52 and CMD53 */
+ cmd_reg = SFIELD(cmd_reg, SPI_RW, 1);
+ }
+
+ switch (cmd) {
+ case SDIOH_CMD_59: /* CRC_ON_OFF (SPI Mode Only) - Response R1 */
+ cmd52data = arg & 0x1;
+ case SDIOH_CMD_0: /* Set Card to Idle State - No Response */
+ case SDIOH_CMD_5: /* Send Operation condition - Response R4 */
+ sd_trace(("%s: CMD%d\n", __FUNCTION__, cmd));
+ spi_datalen = 44;
+ spi_pre_cmd_pad = 12;
+ spi_max_response_pad = 28;
+ break;
+
+ case SDIOH_CMD_3: /* Ask card to send RCA - Response R6 */
+ case SDIOH_CMD_7: /* Select card - Response R1 */
+ case SDIOH_CMD_15: /* Set card to inactive state - Response None */
+ sd_err(("%s: CMD%d is invalid for SPI Mode.\n", __FUNCTION__, cmd));
+ return ERROR;
+ break;
+
+ case SDIOH_CMD_52: /* IO R/W Direct (single byte) - Response R5 */
+ cmd52data = GFIELD(cmd_arg, CMD52_DATA);
+ cmd_arg = arg;
+ cmd_reg = SFIELD(cmd_reg, SPI_FUNC, GFIELD(cmd_arg, CMD52_FUNCTION));
+ cmd_reg = SFIELD(cmd_reg, SPI_ADDR, GFIELD(cmd_arg, CMD52_REG_ADDR));
+ /* Display trace for byte write */
+ if (GFIELD(cmd_arg, CMD52_RW_FLAG) == 1) {
+ sd_trace(("%s: CMD52: Wr F:%d @0x%04x=%02x\n",
+ __FUNCTION__,
+ GFIELD(cmd_arg, CMD52_FUNCTION),
+ GFIELD(cmd_arg, CMD52_REG_ADDR),
+ cmd52data));
+ }
+
+ spi_datalen = 32;
+ spi_max_response_pad = 28;
+
+ break;
+ case SDIOH_CMD_53: /* IO R/W Extended (multiple bytes/blocks) */
+ cmd_arg = arg;
+ cmd_reg = SFIELD(cmd_reg, SPI_FUNC, GFIELD(cmd_arg, CMD53_FUNCTION));
+ cmd_reg = SFIELD(cmd_reg, SPI_ADDR, GFIELD(cmd_arg, CMD53_REG_ADDR));
+ cmd_reg = SFIELD(cmd_reg, SPI_BLKMODE, 0);
+ cmd_reg = SFIELD(cmd_reg, SPI_OPCODE, GFIELD(cmd_arg, CMD53_OP_CODE));
+ cmd_reg = SFIELD(cmd_reg, SPI_STUFF0, (sd->data_xfer_count>>8));
+ cmd52data = (uint8)sd->data_xfer_count;
+
+ /* Set upper bit in byte count if necessary, but don't set it for 512 bytes. */
+ if ((sd->data_xfer_count > 255) && (sd->data_xfer_count < 512)) {
+ cmd_reg |= 1;
+ }
+
+ if (GFIELD(cmd_reg, SPI_RW) == 1) { /* Write */
+ spi_max_response_pad = 32;
+ spi_datalen = (sd->data_xfer_count + spi_max_response_pad) & 0xFFFC;
+ } else { /* Read */
+
+ spi_max_response_pad = 32;
+ spi_datalen = (sd->data_xfer_count + spi_max_response_pad) & 0xFFFC;
+ }
+ sd_trace(("%s: CMD53: %s F:%d @0x%04x len=0x%02x\n",
+ __FUNCTION__,
+ (GFIELD(cmd_reg, SPI_RW) == 1 ? "Wr" : "Rd"),
+ GFIELD(cmd_arg, CMD53_FUNCTION),
+ GFIELD(cmd_arg, CMD53_REG_ADDR),
+ cmd52data));
+ break;
+
+ default:
+ sd_err(("%s: Unknown command %d\n", __FUNCTION__, cmd));
+ return ERROR;
+ }
+
+ /* Set up and issue the SDIO command */
+ memset(spi_databuf, SDSPI_IDLE_PAD, spi_datalen);
+ spi_databuf[spi_pre_cmd_pad + 0] = (cmd_reg & 0xFF000000) >> 24;
+ spi_databuf[spi_pre_cmd_pad + 1] = (cmd_reg & 0x00FF0000) >> 16;
+ spi_databuf[spi_pre_cmd_pad + 2] = (cmd_reg & 0x0000FF00) >> 8;
+ spi_databuf[spi_pre_cmd_pad + 3] = (cmd_reg & 0x000000FF);
+ spi_databuf[spi_pre_cmd_pad + 4] = cmd52data;
+
+ /* Generate CRC7 for command, if CRC is enabled, otherwise, a
+ * default CRC7 of 0x95, which is correct for CMD0, is used.
+ */
+ if (sd_crc) {
+ cmd_crc = sdspi_crc7(&spi_databuf[spi_pre_cmd_pad], 5);
+ }
+ spi_databuf[spi_pre_cmd_pad + 5] = cmd_crc;
+#define SPI_STOP_TRAN 0xFD
+
+ /* for CMD53 Write, put the data into the output buffer */
+ if ((cmd == SDIOH_CMD_53) && (GFIELD(cmd_arg, CMD53_RW_FLAG) == 1)) {
+ if (datalen != 0) {
+ spi_databuf[spi_pre_cmd_pad + 9] = SDSPI_IDLE_PAD;
+ spi_databuf[spi_pre_cmd_pad + 10] = SDSPI_START_BLOCK;
+
+ for (i = 0; i < sd->data_xfer_count; i++) {
+ spi_databuf[i + 11 + spi_pre_cmd_pad] = ((uint8 *)data)[i];
+ }
+ if (sd_crc) {
+ dat_crc = sdspi_crc16(&spi_databuf[spi_pre_cmd_pad+11], i);
+ } else {
+ dat_crc = 0xAAAA;
+ }
+ spi_databuf[i + 11 + spi_pre_cmd_pad] = (dat_crc >> 8) & 0xFF;
+ spi_databuf[i + 12 + spi_pre_cmd_pad] = dat_crc & 0xFF;
+ } else if (sd->data_xfer_count == 2) {
+ spi_databuf[spi_pre_cmd_pad + 9] = SDSPI_IDLE_PAD;
+ spi_databuf[spi_pre_cmd_pad + 10] = SDSPI_START_BLOCK;
+ spi_databuf[spi_pre_cmd_pad + 11] = sd->cmd53_wr_data & 0xFF;
+ spi_databuf[spi_pre_cmd_pad + 12] = (sd->cmd53_wr_data & 0x0000FF00) >> 8;
+ if (sd_crc) {
+ dat_crc = sdspi_crc16(&spi_databuf[spi_pre_cmd_pad+11], 2);
+ } else {
+ dat_crc = 0x22AA;
+ }
+ spi_databuf[spi_pre_cmd_pad + 13] = (dat_crc >> 8) & 0xFF;
+ spi_databuf[spi_pre_cmd_pad + 14] = (dat_crc & 0xFF);
+ } else if (sd->data_xfer_count == 4) {
+ spi_databuf[spi_pre_cmd_pad + 9] = SDSPI_IDLE_PAD;
+ spi_databuf[spi_pre_cmd_pad + 10] = SDSPI_START_BLOCK;
+ spi_databuf[spi_pre_cmd_pad + 11] = sd->cmd53_wr_data & 0xFF;
+ spi_databuf[spi_pre_cmd_pad + 12] = (sd->cmd53_wr_data & 0x0000FF00) >> 8;
+ spi_databuf[spi_pre_cmd_pad + 13] = (sd->cmd53_wr_data & 0x00FF0000) >> 16;
+ spi_databuf[spi_pre_cmd_pad + 14] = (sd->cmd53_wr_data & 0xFF000000) >> 24;
+ if (sd_crc) {
+ dat_crc = sdspi_crc16(&spi_databuf[spi_pre_cmd_pad+11], 4);
+ } else {
+ dat_crc = 0x44AA;
+ }
+ spi_databuf[spi_pre_cmd_pad + 15] = (dat_crc >> 8) & 0xFF;
+ spi_databuf[spi_pre_cmd_pad + 16] = (dat_crc & 0xFF);
+ } else {
+ printf("CMD53 Write: size %d unsupported\n", sd->data_xfer_count);
+ }
+ }
+
+ spi_sendrecv(sd, spi_databuf, spi_rspbuf, spi_datalen);
+
+ for (i = spi_pre_cmd_pad + SDSPI_COMMAND_LEN; i < spi_max_response_pad; i++) {
+ if ((spi_rspbuf[i] & SDSPI_START_BIT_MASK) == 0) {
+ break;
+ }
+ }
+
+ if (i == spi_max_response_pad) {
+ sd_err(("%s: Did not get a response for CMD%d\n", __FUNCTION__, cmd));
+ return ERROR;
+ }
+
+ /* Extract the response. */
+ sd->card_response = spi_rspbuf[i];
+
+ /* for CMD53 Read, find the start of the response data... */
+ if ((cmd == SDIOH_CMD_53) && (GFIELD(cmd_arg, CMD52_RW_FLAG) == 0)) {
+ for (; i < spi_max_response_pad; i++) {
+ if (spi_rspbuf[i] == SDSPI_START_BLOCK) {
+ break;
+ }
+ }
+
+ if (i == spi_max_response_pad) {
+ printf("Did not get a start of data phase for CMD%d\n", cmd);
+ max_errors++;
+ sdspi_abort(sd, GFIELD(cmd_arg, CMD53_FUNCTION));
+ }
+ sd->card_rsp_data = spi_rspbuf[i+1];
+ sd->card_rsp_data |= spi_rspbuf[i+2] << 8;
+ sd->card_rsp_data |= spi_rspbuf[i+3] << 16;
+ sd->card_rsp_data |= spi_rspbuf[i+4] << 24;
+
+ if (datalen != 0) {
+ i++;
+ for (j = 0; j < sd->data_xfer_count; j++) {
+ ((uint8 *)data)[j] = spi_rspbuf[i+j];
+ }
+ if (sd_crc) {
+ uint16 recv_crc;
+
+ recv_crc = spi_rspbuf[i+j] << 8 | spi_rspbuf[i+j+1];
+ dat_crc = sdspi_crc16((uint8 *)data, datalen);
+ if (dat_crc != recv_crc) {
+ sd_err(("%s: Incorrect data CRC: expected 0x%04x, "
+ "received 0x%04x\n",
+ __FUNCTION__, dat_crc, recv_crc));
+ }
+ }
+ }
+ return SUCCESS;
+ }
+
+ sd->card_rsp_data = spi_rspbuf[i+4];
+ sd->card_rsp_data |= spi_rspbuf[i+3] << 8;
+ sd->card_rsp_data |= spi_rspbuf[i+2] << 16;
+ sd->card_rsp_data |= spi_rspbuf[i+1] << 24;
+
+ /* Display trace for byte read */
+ if ((cmd == SDIOH_CMD_52) && (GFIELD(cmd_arg, CMD52_RW_FLAG) == 0)) {
+ sd_trace(("%s: CMD52: Rd F:%d @0x%04x=%02x\n",
+ __FUNCTION__,
+ GFIELD(cmd_arg, CMD53_FUNCTION),
+ GFIELD(cmd_arg, CMD53_REG_ADDR),
+ sd->card_rsp_data >> 24));
+ }
+
+ return SUCCESS;
+}
+
+/*
+ * On entry: if single-block or non-block, buffer size <= block size.
+ * If multi-block, buffer size is unlimited.
+ * Question is how to handle the left-overs in either single- or multi-block.
+ * I think the caller should break the buffer up so this routine will always
+ * use block size == buffer size to handle the end piece of the buffer
+ */
+
+static int
+sdspi_card_buf(sdioh_info_t *sd, int rw, int func, bool fifo, uint32 addr, int nbytes, uint32 *data)
+{
+ int status;
+ uint32 cmd_arg;
+ uint32 rsp5;
+ int num_blocks, blocksize;
+ bool local_blockmode, local_dma;
+ bool read = rw == SDIOH_READ ? 1 : 0;
+
+ ASSERT(nbytes);
+
+ cmd_arg = 0;
+ sd_data(("%s: %s 53 func %d, %s, addr 0x%x, len %d bytes, r_cnt %d t_cnt %d\n",
+ __FUNCTION__, read ? "Rd" : "Wr", func, fifo ? "FIXED" : "INCR",
+ addr, nbytes, sd->r_cnt, sd->t_cnt));
+
+ if (read) sd->r_cnt++; else sd->t_cnt++;
+
+ local_blockmode = sd->sd_blockmode;
+ local_dma = sd->sd_use_dma;
+
+ /* Don't bother with block mode on small xfers */
+ if (nbytes < sd->client_block_size[func]) {
+ sd_info(("setting local blockmode to false: nbytes (%d) != block_size (%d)\n",
+ nbytes, sd->client_block_size[func]));
+ local_blockmode = FALSE;
+ local_dma = FALSE;
+ }
+
+ if (local_blockmode) {
+ blocksize = MIN(sd->client_block_size[func], nbytes);
+ num_blocks = nbytes/blocksize;
+ cmd_arg = SFIELD(cmd_arg, CMD53_BYTE_BLK_CNT, num_blocks);
+ cmd_arg = SFIELD(cmd_arg, CMD53_BLK_MODE, 1);
+ } else {
+ num_blocks = 1;
+ blocksize = nbytes;
+ cmd_arg = SFIELD(cmd_arg, CMD53_BYTE_BLK_CNT, nbytes);
+ cmd_arg = SFIELD(cmd_arg, CMD53_BLK_MODE, 0);
+ }
+
+ if (fifo)
+ cmd_arg = SFIELD(cmd_arg, CMD53_OP_CODE, 0);
+ else
+ cmd_arg = SFIELD(cmd_arg, CMD53_OP_CODE, 1);
+
+ cmd_arg = SFIELD(cmd_arg, CMD53_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD53_REG_ADDR, addr);
+ if (read)
+ cmd_arg = SFIELD(cmd_arg, CMD53_RW_FLAG, SDIOH_XFER_TYPE_READ);
+ else
+ cmd_arg = SFIELD(cmd_arg, CMD53_RW_FLAG, SDIOH_XFER_TYPE_WRITE);
+
+ sd->data_xfer_count = nbytes;
+ if ((func == 2) && (fifo == 1)) {
+ sd_data(("%s: %s 53 func %d, %s, addr 0x%x, len %d bytes, r_cnt %d t_cnt %d\n",
+ __FUNCTION__, read ? "Rd" : "Wr", func, fifo ? "FIXED" : "INCR",
+ addr, nbytes, sd->r_cnt, sd->t_cnt));
+ }
+
+ /* sdspi_cmd_issue() returns with the command complete bit
+ * in the ISR already cleared
+ */
+ if ((status = sdspi_cmd_issue(sd, local_dma,
+ SDIOH_CMD_53, cmd_arg,
+ data, nbytes)) != SUCCESS) {
+ sd_err(("%s: cmd_issue failed for %s\n", __FUNCTION__, (read ? "read" : "write")));
+ return status;
+ }
+
+ sdspi_cmd_getrsp(sd, &rsp5, 1);
+
+ if (rsp5 != 0x00) {
+ sd_err(("%s: rsp5 flags = 0x%x, expecting 0x00\n",
+ __FUNCTION__, rsp5));
+ return ERROR;
+ }
+
+ return SUCCESS;
+}
+
+static int
+set_client_block_size(sdioh_info_t *sd, int func, int block_size)
+{
+ int base;
+ int err = 0;
+
+ sd_err(("%s: Setting block size %d, func %d\n", __FUNCTION__, block_size, func));
+ sd->client_block_size[func] = block_size;
+
+ /* Set the block size in the SDIO Card register */
+ base = func * SDIOD_FBR_SIZE;
+ err = sdspi_card_regwrite(sd, 0, base + SDIOD_CCCR_BLKSIZE_0, 1, block_size & 0xff);
+ if (!err) {
+ err = sdspi_card_regwrite(sd, 0, base + SDIOD_CCCR_BLKSIZE_1, 1,
+ (block_size >> 8) & 0xff);
+ }
+
+ /*
+ * Do not set the block size in the SDIO Host register; that
+ * is func dependent and will get done on an individual
+ * transaction basis.
+ */
+
+ return (err ? BCME_SDIO_ERROR : 0);
+}
+
+/* Reset and re-initialize the device */
+int
+sdioh_sdio_reset(sdioh_info_t *si)
+{
+ si->card_init_done = FALSE;
+ return sdspi_client_init(si);
+}
+
+#define CRC7_POLYNOM 0x09
+#define CRC7_CRCHIGHBIT 0x40
+
+static uint8 sdspi_crc7(unsigned char* p, uint32 len)
+{
+ uint8 c, j, bit, crc = 0;
+ uint32 i;
+
+ for (i = 0; i < len; i++) {
+ c = *p++;
+ for (j = 0x80; j; j >>= 1) {
+ bit = crc & CRC7_CRCHIGHBIT;
+ crc <<= 1;
+ if (c & j) bit ^= CRC7_CRCHIGHBIT;
+ if (bit) crc ^= CRC7_POLYNOM;
+ }
+ }
+
+ /* Convert the CRC7 to an 8-bit SD CRC */
+ crc = (crc << 1) | 1;
+
+ return (crc);
+}
+
+#define CRC16_POLYNOM 0x1021
+#define CRC16_CRCHIGHBIT 0x8000
+
+static uint16 sdspi_crc16(unsigned char* p, uint32 len)
+{
+ uint32 i;
+ uint16 j, c, bit;
+ uint16 crc = 0;
+
+ for (i = 0; i < len; i++) {
+ c = *p++;
+ for (j = 0x80; j; j >>= 1) {
+ bit = crc & CRC16_CRCHIGHBIT;
+ crc <<= 1;
+ if (c & j) bit ^= CRC16_CRCHIGHBIT;
+ if (bit) crc ^= CRC16_POLYNOM;
+ }
+ }
+
+ return (crc);
+}
diff --git a/drivers/net/wireless/bcm4329/bcmsdspi_linux.c b/drivers/net/wireless/bcm4329/bcmsdspi_linux.c
new file mode 100644
index 0000000..e2e0ca6
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmsdspi_linux.c
@@ -0,0 +1,252 @@
+/*
+ * Broadcom SPI Host Controller Driver - Linux Per-port
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdspi_linux.c,v 1.7.2.1.4.3 2008/06/30 21:09:36 Exp $
+ */
+
+#include <typedefs.h>
+#include <pcicfg.h>
+#include <bcmutils.h>
+
+#include <sdio.h> /* SDIO Specs */
+#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */
+#include <sdiovar.h> /* to get msglevel bit values */
+
+#include <linux/sched.h> /* request_irq(), free_irq() */
+
+#include <bcmsdspi.h>
+#include <bcmspi.h>
+
+extern uint sd_crc;
+module_param(sd_crc, uint, 0);
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0))
+#define KERNEL26
+#endif
+
+struct sdos_info {
+ sdioh_info_t *sd;
+ spinlock_t lock;
+ wait_queue_head_t intr_wait_queue;
+};
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0))
+#define BLOCKABLE() (!in_atomic())
+#else
+#define BLOCKABLE() (!in_interrupt())
+#endif
+
+/* Interrupt handler */
+static irqreturn_t
+sdspi_isr(int irq, void *dev_id
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
+, struct pt_regs *ptregs
+#endif
+)
+{
+ sdioh_info_t *sd;
+ struct sdos_info *sdos;
+ bool ours;
+
+ sd = (sdioh_info_t *)dev_id;
+ sd->local_intrcount++;
+
+ if (!sd->card_init_done) {
+ sd_err(("%s: Hey Bogus intr...not even initted: irq %d\n", __FUNCTION__, irq));
+ return IRQ_RETVAL(FALSE);
+ } else {
+ ours = spi_check_client_intr(sd, NULL);
+
+ /* For local interrupts, wake the waiting process */
+ if (ours && sd->got_hcint) {
+ sdos = (struct sdos_info *)sd->sdos_info;
+ wake_up_interruptible(&sdos->intr_wait_queue);
+ }
+
+ return IRQ_RETVAL(ours);
+ }
+}
+
+/* Register with Linux for interrupts */
+int
+spi_register_irq(sdioh_info_t *sd, uint irq)
+{
+ sd_trace(("Entering %s: irq == %d\n", __FUNCTION__, irq));
+ if (request_irq(irq, sdspi_isr, IRQF_SHARED, "bcmsdspi", sd) < 0) {
+ sd_err(("%s: request_irq() failed\n", __FUNCTION__));
+ return ERROR;
+ }
+ return SUCCESS;
+}
+
+/* Free Linux irq */
+void
+spi_free_irq(uint irq, sdioh_info_t *sd)
+{
+ free_irq(irq, sd);
+}
+
+/* Map Host controller registers */
+
+uint32 *
+spi_reg_map(osl_t *osh, uintptr addr, int size)
+{
+ return (uint32 *)REG_MAP(addr, size);
+}
+
+void
+spi_reg_unmap(osl_t *osh, uintptr addr, int size)
+{
+ REG_UNMAP((void*)(uintptr)addr);
+}
+
+int
+spi_osinit(sdioh_info_t *sd)
+{
+ struct sdos_info *sdos;
+
+ sdos = (struct sdos_info*)MALLOC(sd->osh, sizeof(struct sdos_info));
+ sd->sdos_info = (void*)sdos;
+ if (sdos == NULL)
+ return BCME_NOMEM;
+
+ sdos->sd = sd;
+ spin_lock_init(&sdos->lock);
+ init_waitqueue_head(&sdos->intr_wait_queue);
+ return BCME_OK;
+}
+
+void
+spi_osfree(sdioh_info_t *sd)
+{
+ struct sdos_info *sdos;
+ ASSERT(sd && sd->sdos_info);
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ MFREE(sd->osh, sdos, sizeof(struct sdos_info));
+}
+
+/* Interrupt enable/disable */
+SDIOH_API_RC
+sdioh_interrupt_set(sdioh_info_t *sd, bool enable)
+{
+ ulong flags;
+ struct sdos_info *sdos;
+
+ sd_trace(("%s: %s\n", __FUNCTION__, enable ? "Enabling" : "Disabling"));
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ ASSERT(sdos);
+
+ if (!(sd->host_init_done && sd->card_init_done)) {
+ sd_err(("%s: Card & Host are not initted - bailing\n", __FUNCTION__));
+ return SDIOH_API_RC_FAIL;
+ }
+
+ if (enable && !(sd->intr_handler && sd->intr_handler_arg)) {
+ sd_err(("%s: no handler registered, will not enable\n", __FUNCTION__));
+ return SDIOH_API_RC_FAIL;
+ }
+
+ /* Ensure atomicity for enable/disable calls */
+ spin_lock_irqsave(&sdos->lock, flags);
+
+ sd->client_intr_enabled = enable;
+ if (enable && !sd->lockcount)
+ spi_devintr_on(sd);
+ else
+ spi_devintr_off(sd);
+
+ spin_unlock_irqrestore(&sdos->lock, flags);
+
+ return SDIOH_API_RC_SUCCESS;
+}
+
+/* Protect against reentrancy (disable device interrupts while executing) */
+void
+spi_lock(sdioh_info_t *sd)
+{
+ ulong flags;
+ struct sdos_info *sdos;
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ ASSERT(sdos);
+
+ sd_trace(("%s: %d\n", __FUNCTION__, sd->lockcount));
+
+ spin_lock_irqsave(&sdos->lock, flags);
+ if (sd->lockcount) {
+ sd_err(("%s: Already locked!\n", __FUNCTION__));
+ ASSERT(sd->lockcount == 0);
+ }
+ spi_devintr_off(sd);
+ sd->lockcount++;
+ spin_unlock_irqrestore(&sdos->lock, flags);
+}
+
+/* Enable client interrupt */
+void
+spi_unlock(sdioh_info_t *sd)
+{
+ ulong flags;
+ struct sdos_info *sdos;
+
+ sd_trace(("%s: %d, %d\n", __FUNCTION__, sd->lockcount, sd->client_intr_enabled));
+ ASSERT(sd->lockcount > 0);
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ ASSERT(sdos);
+
+ spin_lock_irqsave(&sdos->lock, flags);
+ if (--sd->lockcount == 0 && sd->client_intr_enabled) {
+ spi_devintr_on(sd);
+ }
+ spin_unlock_irqrestore(&sdos->lock, flags);
+}
+
+void spi_waitbits(sdioh_info_t *sd, bool yield)
+{
+ struct sdos_info *sdos;
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+
+#ifndef BCMSDYIELD
+ ASSERT(!yield);
+#endif
+ sd_trace(("%s: yield %d canblock %d\n",
+ __FUNCTION__, yield, BLOCKABLE()));
+
+ /* Clear the "interrupt happened" flag and last intrstatus */
+ sd->got_hcint = FALSE;
+
+#ifdef BCMSDYIELD
+ if (yield && BLOCKABLE()) {
+ /* Wait for the indication, the interrupt will be masked when the ISR fires. */
+ wait_event_interruptible(sdos->intr_wait_queue, (sd->got_hcint));
+ } else
+#endif /* BCMSDYIELD */
+ {
+ spi_spinbits(sd);
+ }
+
+}
diff --git a/drivers/net/wireless/bcm4329/bcmsdstd.c b/drivers/net/wireless/bcm4329/bcmsdstd.c
new file mode 100644
index 0000000..0ca1f8f
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmsdstd.c
@@ -0,0 +1,3127 @@
+/*
+ * 'Standard' SDIO HOST CONTROLLER driver
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdstd.c,v 1.64.4.1.4.4.2.18 2010/08/17 17:00:48 Exp $
+ */
+
+#include <typedefs.h>
+
+#include <bcmdevs.h>
+#include <bcmendian.h>
+#include <bcmutils.h>
+#include <osl.h>
+#include <siutils.h>
+#include <sdio.h> /* SDIO Device and Protocol Specs */
+#include <sdioh.h> /* SDIO Host Controller Specification */
+#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */
+#include <sdiovar.h> /* ioctl/iovars */
+#include <pcicfg.h>
+
+
+#define SD_PAGE_BITS 12
+#define SD_PAGE (1 << SD_PAGE_BITS)
+
+#include <bcmsdstd.h>
+
+/* Globals */
+uint sd_msglevel = SDH_ERROR_VAL;
+uint sd_hiok = TRUE; /* Use hi-speed mode if available? */
+uint sd_sdmode = SDIOH_MODE_SD4; /* Use SD4 mode by default */
+uint sd_f2_blocksize = 64; /* Default blocksize */
+
+#ifdef BCMSDYIELD
+bool sd_yieldcpu = TRUE; /* Allow CPU yielding for buffer requests */
+uint sd_minyield = 0; /* Minimum xfer size to allow CPU yield */
+bool sd_forcerb = FALSE; /* Force sync readback in intrs_on/off */
+#endif
+
+uint sd_divisor = 2; /* Default 48MHz/2 = 24MHz */
+
+uint sd_power = 1; /* Default to SD Slot powered ON */
+uint sd_clock = 1; /* Default to SD Clock turned ON */
+uint sd_pci_slot = 0xFFFFffff; /* Used to force selection of a particular PCI slot */
+uint8 sd_dma_mode = DMA_MODE_SDMA; /* Default to SDMA for now */
+
+uint sd_toctl = 7;
+
+static bool trap_errs = FALSE;
+
+static const char *dma_mode_description[] = { "PIO", "SDMA", "ADMA1", "32b ADMA2", "64b ADMA2" };
+
+/* Prototypes */
+static bool sdstd_start_clock(sdioh_info_t *sd, uint16 divisor);
+static bool sdstd_start_power(sdioh_info_t *sd);
+static bool sdstd_bus_width(sdioh_info_t *sd, int width);
+static int sdstd_set_highspeed_mode(sdioh_info_t *sd, bool HSMode);
+static int sdstd_set_dma_mode(sdioh_info_t *sd, int8 dma_mode);
+static int sdstd_card_enablefuncs(sdioh_info_t *sd);
+static void sdstd_cmd_getrsp(sdioh_info_t *sd, uint32 *rsp_buffer, int count);
+static int sdstd_cmd_issue(sdioh_info_t *sd, bool use_dma, uint32 cmd, uint32 arg);
+static int sdstd_card_regread(sdioh_info_t *sd, int func, uint32 regaddr,
+ int regsize, uint32 *data);
+static int sdstd_card_regwrite(sdioh_info_t *sd, int func, uint32 regaddr,
+ int regsize, uint32 data);
+static int sdstd_driver_init(sdioh_info_t *sd);
+static bool sdstd_reset(sdioh_info_t *sd, bool host_reset, bool client_reset);
+static int sdstd_card_buf(sdioh_info_t *sd, int rw, int func, bool fifo,
+ uint32 addr, int nbytes, uint32 *data);
+static int sdstd_abort(sdioh_info_t *sd, uint func);
+static int sdstd_check_errs(sdioh_info_t *sdioh_info, uint32 cmd, uint32 arg);
+static int set_client_block_size(sdioh_info_t *sd, int func, int blocksize);
+static void sd_map_dma(sdioh_info_t * sd);
+static void sd_unmap_dma(sdioh_info_t * sd);
+static void sd_clear_adma_dscr_buf(sdioh_info_t *sd);
+static void sd_fill_dma_data_buf(sdioh_info_t *sd, uint8 data);
+static void sd_create_adma_descriptor(sdioh_info_t *sd,
+ uint32 index, uint32 addr_phys,
+ uint16 length, uint16 flags);
+static void sd_dump_adma_dscr(sdioh_info_t *sd);
+static void sdstd_dumpregs(sdioh_info_t *sd);
+
+
+/*
+ * Private register access routines.
+ */
+
+/* 16 bit PCI regs */
+
+extern uint16 sdstd_rreg16(sdioh_info_t *sd, uint reg);
+uint16
+sdstd_rreg16(sdioh_info_t *sd, uint reg)
+{
+
+ volatile uint16 data = *(volatile uint16 *)(sd->mem_space + reg);
+ sd_ctrl(("16: R Reg 0x%02x, Data 0x%x\n", reg, data));
+ return data;
+}
+
+extern void sdstd_wreg16(sdioh_info_t *sd, uint reg, uint16 data);
+void
+sdstd_wreg16(sdioh_info_t *sd, uint reg, uint16 data)
+{
+ *(volatile uint16 *)(sd->mem_space + reg) = (uint16)data;
+ sd_ctrl(("16: W Reg 0x%02x, Data 0x%x\n", reg, data));
+}
+
+static void
+sdstd_or_reg16(sdioh_info_t *sd, uint reg, uint16 val)
+{
+ volatile uint16 data = *(volatile uint16 *)(sd->mem_space + reg);
+ sd_ctrl(("16: OR Reg 0x%02x, Val 0x%x\n", reg, val));
+ data |= val;
+ *(volatile uint16 *)(sd->mem_space + reg) = (uint16)data;
+
+}
+static void
+sdstd_mod_reg16(sdioh_info_t *sd, uint reg, int16 mask, uint16 val)
+{
+
+ volatile uint16 data = *(volatile uint16 *)(sd->mem_space + reg);
+ sd_ctrl(("16: MOD Reg 0x%02x, Mask 0x%x, Val 0x%x\n", reg, mask, val));
+ data &= ~mask;
+ data |= (val & mask);
+ *(volatile uint16 *)(sd->mem_space + reg) = (uint16)data;
+}
+
+
+/* 32 bit PCI regs */
+static uint32
+sdstd_rreg(sdioh_info_t *sd, uint reg)
+{
+ volatile uint32 data = *(volatile uint32 *)(sd->mem_space + reg);
+ sd_ctrl(("32: R Reg 0x%02x, Data 0x%x\n", reg, data));
+ return data;
+}
+static inline void
+sdstd_wreg(sdioh_info_t *sd, uint reg, uint32 data)
+{
+ *(volatile uint32 *)(sd->mem_space + reg) = (uint32)data;
+ sd_ctrl(("32: W Reg 0x%02x, Data 0x%x\n", reg, data));
+
+}
+
+/* 8 bit PCI regs */
+static inline void
+sdstd_wreg8(sdioh_info_t *sd, uint reg, uint8 data)
+{
+ *(volatile uint8 *)(sd->mem_space + reg) = (uint8)data;
+ sd_ctrl(("08: W Reg 0x%02x, Data 0x%x\n", reg, data));
+}
+static uint8
+sdstd_rreg8(sdioh_info_t *sd, uint reg)
+{
+ volatile uint8 data = *(volatile uint8 *)(sd->mem_space + reg);
+ sd_ctrl(("08: R Reg 0x%02x, Data 0x%x\n", reg, data));
+ return data;
+}
+
+/*
+ * Private work routines
+ */
+
+sdioh_info_t *glob_sd;
+
+/*
+ * Public entry points & extern's
+ */
+extern sdioh_info_t *
+sdioh_attach(osl_t *osh, void *bar0, uint irq)
+{
+ sdioh_info_t *sd;
+
+ sd_trace(("%s\n", __FUNCTION__));
+ if ((sd = (sdioh_info_t *)MALLOC(osh, sizeof(sdioh_info_t))) == NULL) {
+ sd_err(("sdioh_attach: out of memory, malloced %d bytes\n", MALLOCED(osh)));
+ return NULL;
+ }
+ bzero((char *)sd, sizeof(sdioh_info_t));
+ glob_sd = sd;
+ sd->osh = osh;
+ if (sdstd_osinit(sd) != 0) {
+ sd_err(("%s:sdstd_osinit() failed\n", __FUNCTION__));
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return NULL;
+ }
+ sd->mem_space = (volatile char *)sdstd_reg_map(osh, (uintptr)bar0, SDIOH_REG_WINSZ);
+ sd_init_dma(sd);
+ sd->irq = irq;
+ if (sd->mem_space == NULL) {
+ sd_err(("%s:ioremap() failed\n", __FUNCTION__));
+ sdstd_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return NULL;
+ }
+ sd_info(("%s:sd->mem_space = %p\n", __FUNCTION__, sd->mem_space));
+ sd->intr_handler = NULL;
+ sd->intr_handler_arg = NULL;
+ sd->intr_handler_valid = FALSE;
+
+ /* Set defaults */
+ sd->sd_blockmode = TRUE;
+ sd->use_client_ints = TRUE;
+ sd->sd_dma_mode = sd_dma_mode;
+
+ if (!sd->sd_blockmode)
+ sd->sd_dma_mode = DMA_MODE_NONE;
+
+ if (sdstd_driver_init(sd) != SUCCESS) {
+ /* If host CPU was reset without resetting SD bus or
+ SD device, the device will still have its RCA but
+ driver no longer knows what it is (since driver has been restarted).
+ go through once to clear the RCA and a gain reassign it.
+ */
+ sd_info(("driver_init failed - Reset RCA and try again\n"));
+ if (sdstd_driver_init(sd) != SUCCESS) {
+ sd_err(("%s:driver_init() failed()\n", __FUNCTION__));
+ if (sd->mem_space) {
+ sdstd_reg_unmap(osh, (uintptr)sd->mem_space, SDIOH_REG_WINSZ);
+ sd->mem_space = NULL;
+ }
+ sdstd_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return (NULL);
+ }
+ }
+
+ OSL_DMADDRWIDTH(osh, 32);
+
+ /* Always map DMA buffers, so we can switch between DMA modes. */
+ sd_map_dma(sd);
+
+ if (sdstd_register_irq(sd, irq) != SUCCESS) {
+ sd_err(("%s: sdstd_register_irq() failed for irq = %d\n", __FUNCTION__, irq));
+ sdstd_free_irq(sd->irq, sd);
+ if (sd->mem_space) {
+ sdstd_reg_unmap(osh, (uintptr)sd->mem_space, SDIOH_REG_WINSZ);
+ sd->mem_space = NULL;
+ }
+
+ sdstd_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return (NULL);
+ }
+
+ sd_trace(("%s: Done\n", __FUNCTION__));
+ return sd;
+}
+
+extern SDIOH_API_RC
+sdioh_detach(osl_t *osh, sdioh_info_t *sd)
+{
+ sd_trace(("%s\n", __FUNCTION__));
+ if (sd) {
+ sd_unmap_dma(sd);
+ sdstd_wreg16(sd, SD_IntrSignalEnable, 0);
+ sd_trace(("%s: freeing irq %d\n", __FUNCTION__, sd->irq));
+ sdstd_free_irq(sd->irq, sd);
+ if (sd->card_init_done)
+ sdstd_reset(sd, 1, 1);
+ if (sd->mem_space) {
+ sdstd_reg_unmap(osh, (uintptr)sd->mem_space, SDIOH_REG_WINSZ);
+ sd->mem_space = NULL;
+ }
+
+ sdstd_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ }
+ return SDIOH_API_RC_SUCCESS;
+}
+
+/* Configure callback to client when we receive client interrupt */
+extern SDIOH_API_RC
+sdioh_interrupt_register(sdioh_info_t *sd, sdioh_cb_fn_t fn, void *argh)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+ sd->intr_handler = fn;
+ sd->intr_handler_arg = argh;
+ sd->intr_handler_valid = TRUE;
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_interrupt_deregister(sdioh_info_t *sd)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+ sd->intr_handler_valid = FALSE;
+ sd->intr_handler = NULL;
+ sd->intr_handler_arg = NULL;
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_interrupt_query(sdioh_info_t *sd, bool *onoff)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+ *onoff = sd->client_intr_enabled;
+ return SDIOH_API_RC_SUCCESS;
+}
+
+#if defined(DHD_DEBUG)
+extern bool
+sdioh_interrupt_pending(sdioh_info_t *sd)
+{
+ uint16 intrstatus;
+ intrstatus = sdstd_rreg16(sd, SD_IntrStatus);
+ return !!(intrstatus & CLIENT_INTR);
+}
+#endif
+
+uint
+sdioh_query_iofnum(sdioh_info_t *sd)
+{
+ return sd->num_funcs;
+}
+
+/* IOVar table */
+enum {
+ IOV_MSGLEVEL = 1,
+ IOV_BLOCKMODE,
+ IOV_BLOCKSIZE,
+ IOV_DMA,
+ IOV_USEINTS,
+ IOV_NUMINTS,
+ IOV_NUMLOCALINTS,
+ IOV_HOSTREG,
+ IOV_DEVREG,
+ IOV_DIVISOR,
+ IOV_SDMODE,
+ IOV_HISPEED,
+ IOV_HCIREGS,
+ IOV_POWER,
+ IOV_YIELDCPU,
+ IOV_MINYIELD,
+ IOV_FORCERB,
+ IOV_CLOCK
+};
+
+const bcm_iovar_t sdioh_iovars[] = {
+ {"sd_msglevel", IOV_MSGLEVEL, 0, IOVT_UINT32, 0 },
+ {"sd_blockmode", IOV_BLOCKMODE, 0, IOVT_BOOL, 0 },
+ {"sd_blocksize", IOV_BLOCKSIZE, 0, IOVT_UINT32, 0 }, /* ((fn << 16) | size) */
+ {"sd_dma", IOV_DMA, 0, IOVT_UINT32, 0 },
+#ifdef BCMSDYIELD
+ {"sd_yieldcpu", IOV_YIELDCPU, 0, IOVT_BOOL, 0 },
+ {"sd_minyield", IOV_MINYIELD, 0, IOVT_UINT32, 0 },
+ {"sd_forcerb", IOV_FORCERB, 0, IOVT_BOOL, 0 },
+#endif
+ {"sd_ints", IOV_USEINTS, 0, IOVT_BOOL, 0 },
+ {"sd_numints", IOV_NUMINTS, 0, IOVT_UINT32, 0 },
+ {"sd_numlocalints", IOV_NUMLOCALINTS, 0, IOVT_UINT32, 0 },
+ {"sd_hostreg", IOV_HOSTREG, 0, IOVT_BUFFER, sizeof(sdreg_t) },
+ {"sd_devreg", IOV_DEVREG, 0, IOVT_BUFFER, sizeof(sdreg_t) },
+ {"sd_divisor", IOV_DIVISOR, 0, IOVT_UINT32, 0 },
+ {"sd_power", IOV_POWER, 0, IOVT_UINT32, 0 },
+ {"sd_clock", IOV_CLOCK, 0, IOVT_UINT32, 0 },
+ {"sd_mode", IOV_SDMODE, 0, IOVT_UINT32, 100},
+ {"sd_highspeed", IOV_HISPEED, 0, IOVT_UINT32, 0},
+ {NULL, 0, 0, 0, 0 }
+};
+
+int
+sdioh_iovar_op(sdioh_info_t *si, const char *name,
+ void *params, int plen, void *arg, int len, bool set)
+{
+ const bcm_iovar_t *vi = NULL;
+ int bcmerror = 0;
+ int val_size;
+ int32 int_val = 0;
+ bool bool_val;
+ uint32 actionid;
+
+ ASSERT(name);
+ ASSERT(len >= 0);
+
+ /* Get must have return space; Set does not take qualifiers */
+ ASSERT(set || (arg && len));
+ ASSERT(!set || (!params && !plen));
+
+ sd_trace(("%s: Enter (%s %s)\n", __FUNCTION__, (set ? "set" : "get"), name));
+
+ if ((vi = bcm_iovar_lookup(sdioh_iovars, name)) == NULL) {
+ bcmerror = BCME_UNSUPPORTED;
+ goto exit;
+ }
+
+ if ((bcmerror = bcm_iovar_lencheck(vi, arg, len, set)) != 0)
+ goto exit;
+
+ /* Set up params so get and set can share the convenience variables */
+ if (params == NULL) {
+ params = arg;
+ plen = len;
+ }
+
+ if (vi->type == IOVT_VOID)
+ val_size = 0;
+ else if (vi->type == IOVT_BUFFER)
+ val_size = len;
+ else
+ val_size = sizeof(int);
+
+ if (plen >= (int)sizeof(int_val))
+ bcopy(params, &int_val, sizeof(int_val));
+
+ bool_val = (int_val != 0) ? TRUE : FALSE;
+
+ actionid = set ? IOV_SVAL(vi->varid) : IOV_GVAL(vi->varid);
+ switch (actionid) {
+ case IOV_GVAL(IOV_MSGLEVEL):
+ int_val = (int32)sd_msglevel;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_MSGLEVEL):
+ sd_msglevel = int_val;
+ break;
+
+ case IOV_GVAL(IOV_BLOCKMODE):
+ int_val = (int32)si->sd_blockmode;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_BLOCKMODE):
+ si->sd_blockmode = (bool)int_val;
+ /* Haven't figured out how to make non-block mode with DMA */
+ if (!si->sd_blockmode)
+ si->sd_dma_mode = DMA_MODE_NONE;
+ break;
+
+#ifdef BCMSDYIELD
+ case IOV_GVAL(IOV_YIELDCPU):
+ int_val = sd_yieldcpu;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_YIELDCPU):
+ sd_yieldcpu = (bool)int_val;
+ break;
+
+ case IOV_GVAL(IOV_MINYIELD):
+ int_val = sd_minyield;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_MINYIELD):
+ sd_minyield = (bool)int_val;
+ break;
+
+ case IOV_GVAL(IOV_FORCERB):
+ int_val = sd_forcerb;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_FORCERB):
+ sd_forcerb = (bool)int_val;
+ break;
+#endif /* BCMSDYIELD */
+
+ case IOV_GVAL(IOV_BLOCKSIZE):
+ if ((uint32)int_val > si->num_funcs) {
+ bcmerror = BCME_BADARG;
+ break;
+ }
+ int_val = (int32)si->client_block_size[int_val];
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_BLOCKSIZE):
+ {
+ uint func = ((uint32)int_val >> 16);
+ uint blksize = (uint16)int_val;
+ uint maxsize;
+
+ if (func > si->num_funcs) {
+ bcmerror = BCME_BADARG;
+ break;
+ }
+
+ switch (func) {
+ case 0: maxsize = 32; break;
+ case 1: maxsize = BLOCK_SIZE_4318; break;
+ case 2: maxsize = BLOCK_SIZE_4328; break;
+ default: maxsize = 0;
+ }
+ if (blksize > maxsize) {
+ bcmerror = BCME_BADARG;
+ break;
+ }
+ if (!blksize) {
+ blksize = maxsize;
+ }
+
+ /* Now set it */
+ sdstd_lock(si);
+ bcmerror = set_client_block_size(si, func, blksize);
+ sdstd_unlock(si);
+ break;
+ }
+
+ case IOV_GVAL(IOV_DMA):
+ int_val = (int32)si->sd_dma_mode;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_DMA):
+ si->sd_dma_mode = (char)int_val;
+ sdstd_set_dma_mode(si, si->sd_dma_mode);
+ break;
+
+ case IOV_GVAL(IOV_USEINTS):
+ int_val = (int32)si->use_client_ints;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_USEINTS):
+ si->use_client_ints = (bool)int_val;
+ if (si->use_client_ints)
+ si->intmask |= CLIENT_INTR;
+ else
+ si->intmask &= ~CLIENT_INTR;
+ break;
+
+ case IOV_GVAL(IOV_DIVISOR):
+ int_val = (uint32)sd_divisor;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_DIVISOR):
+ sd_divisor = int_val;
+ if (!sdstd_start_clock(si, (uint16)sd_divisor)) {
+ sd_err(("set clock failed!\n"));
+ bcmerror = BCME_ERROR;
+ }
+ break;
+
+ case IOV_GVAL(IOV_POWER):
+ int_val = (uint32)sd_power;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_POWER):
+ sd_power = int_val;
+ if (sd_power == 1) {
+ if (sdstd_driver_init(si) != SUCCESS) {
+ sd_err(("set SD Slot power failed!\n"));
+ bcmerror = BCME_ERROR;
+ } else {
+ sd_err(("SD Slot Powered ON.\n"));
+ }
+ } else {
+ uint8 pwr = 0;
+
+ pwr = SFIELD(pwr, PWR_BUS_EN, 0);
+ sdstd_wreg8(si, SD_PwrCntrl, pwr); /* Set Voltage level */
+ sd_err(("SD Slot Powered OFF.\n"));
+ }
+ break;
+
+ case IOV_GVAL(IOV_CLOCK):
+ int_val = (uint32)sd_clock;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_CLOCK):
+ sd_clock = int_val;
+ if (sd_clock == 1) {
+ sd_info(("SD Clock turned ON.\n"));
+ if (!sdstd_start_clock(si, (uint16)sd_divisor)) {
+ sd_err(("sdstd_start_clock failed\n"));
+ bcmerror = BCME_ERROR;
+ }
+ } else {
+ /* turn off HC clock */
+ sdstd_wreg16(si, SD_ClockCntrl,
+ sdstd_rreg16(si, SD_ClockCntrl) & ~((uint16)0x4));
+
+ sd_info(("SD Clock turned OFF.\n"));
+ }
+ break;
+
+ case IOV_GVAL(IOV_SDMODE):
+ int_val = (uint32)sd_sdmode;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_SDMODE):
+ sd_sdmode = int_val;
+
+ if (!sdstd_bus_width(si, sd_sdmode)) {
+ sd_err(("sdstd_bus_width failed\n"));
+ bcmerror = BCME_ERROR;
+ }
+ break;
+
+ case IOV_GVAL(IOV_HISPEED):
+ int_val = (uint32)sd_hiok;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_HISPEED):
+ sd_hiok = int_val;
+ bcmerror = sdstd_set_highspeed_mode(si, (bool)sd_hiok);
+ break;
+
+ case IOV_GVAL(IOV_NUMINTS):
+ int_val = (int32)si->intrcount;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_NUMLOCALINTS):
+ int_val = (int32)si->local_intrcount;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_HOSTREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+
+ if (sd_ptr->offset < SD_SysAddr || sd_ptr->offset > SD_MaxCurCap) {
+ sd_err(("%s: bad offset 0x%x\n", __FUNCTION__, sd_ptr->offset));
+ bcmerror = BCME_BADARG;
+ break;
+ }
+
+ sd_trace(("%s: rreg%d at offset %d\n", __FUNCTION__,
+ (sd_ptr->offset & 1) ? 8 : ((sd_ptr->offset & 2) ? 16 : 32),
+ sd_ptr->offset));
+ if (sd_ptr->offset & 1)
+ int_val = sdstd_rreg8(si, sd_ptr->offset);
+ else if (sd_ptr->offset & 2)
+ int_val = sdstd_rreg16(si, sd_ptr->offset);
+ else
+ int_val = sdstd_rreg(si, sd_ptr->offset);
+
+ bcopy(&int_val, arg, sizeof(int_val));
+ break;
+ }
+
+ case IOV_SVAL(IOV_HOSTREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+
+ if (sd_ptr->offset < SD_SysAddr || sd_ptr->offset > SD_MaxCurCap) {
+ sd_err(("%s: bad offset 0x%x\n", __FUNCTION__, sd_ptr->offset));
+ bcmerror = BCME_BADARG;
+ break;
+ }
+
+ sd_trace(("%s: wreg%d value 0x%08x at offset %d\n", __FUNCTION__, sd_ptr->value,
+ (sd_ptr->offset & 1) ? 8 : ((sd_ptr->offset & 2) ? 16 : 32),
+ sd_ptr->offset));
+ if (sd_ptr->offset & 1)
+ sdstd_wreg8(si, sd_ptr->offset, (uint8)sd_ptr->value);
+ else if (sd_ptr->offset & 2)
+ sdstd_wreg16(si, sd_ptr->offset, (uint16)sd_ptr->value);
+ else
+ sdstd_wreg(si, sd_ptr->offset, (uint32)sd_ptr->value);
+
+ break;
+ }
+
+ case IOV_GVAL(IOV_DEVREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+ uint8 data;
+
+ if (sdioh_cfg_read(si, sd_ptr->func, sd_ptr->offset, &data)) {
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+
+ int_val = (int)data;
+ bcopy(&int_val, arg, sizeof(int_val));
+ break;
+ }
+
+ case IOV_SVAL(IOV_DEVREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+ uint8 data = (uint8)sd_ptr->value;
+
+ if (sdioh_cfg_write(si, sd_ptr->func, sd_ptr->offset, &data)) {
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+ break;
+ }
+
+
+ default:
+ bcmerror = BCME_UNSUPPORTED;
+ break;
+ }
+exit:
+
+ return bcmerror;
+}
+
+extern SDIOH_API_RC
+sdioh_cfg_read(sdioh_info_t *sd, uint fnc_num, uint32 addr, uint8 *data)
+{
+ SDIOH_API_RC status;
+ /* No lock needed since sdioh_request_byte does locking */
+ status = sdioh_request_byte(sd, SDIOH_READ, fnc_num, addr, data);
+ return status;
+}
+
+extern SDIOH_API_RC
+sdioh_cfg_write(sdioh_info_t *sd, uint fnc_num, uint32 addr, uint8 *data)
+{
+ /* No lock needed since sdioh_request_byte does locking */
+ SDIOH_API_RC status;
+ status = sdioh_request_byte(sd, SDIOH_WRITE, fnc_num, addr, data);
+ return status;
+}
+
+extern SDIOH_API_RC
+sdioh_cis_read(sdioh_info_t *sd, uint func, uint8 *cisd, uint32 length)
+{
+ uint32 count;
+ int offset;
+ uint32 foo;
+ uint8 *cis = cisd;
+
+ sd_trace(("%s: Func = %d\n", __FUNCTION__, func));
+
+ if (!sd->func_cis_ptr[func]) {
+ bzero(cis, length);
+ return SDIOH_API_RC_FAIL;
+ }
+
+ sdstd_lock(sd);
+ *cis = 0;
+ for (count = 0; count < length; count++) {
+ offset = sd->func_cis_ptr[func] + count;
+ if (sdstd_card_regread(sd, 0, offset, 1, &foo)) {
+ sd_err(("%s: regread failed: Can't read CIS\n", __FUNCTION__));
+ sdstd_unlock(sd);
+ return SDIOH_API_RC_FAIL;
+ }
+ *cis = (uint8)(foo & 0xff);
+ cis++;
+ }
+ sdstd_unlock(sd);
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_request_byte(sdioh_info_t *sd, uint rw, uint func, uint regaddr, uint8 *byte)
+{
+ int status;
+ uint32 cmd_arg;
+ uint32 rsp5;
+
+ sdstd_lock(sd);
+ cmd_arg = 0;
+ cmd_arg = SFIELD(cmd_arg, CMD52_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD52_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RW_FLAG, rw == SDIOH_READ ? 0 : 1);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RAW, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD52_DATA, rw == SDIOH_READ ? 0 : *byte);
+
+ if ((status = sdstd_cmd_issue(sd, USE_DMA(sd), SDIOH_CMD_52, cmd_arg)) != SUCCESS) {
+ sdstd_unlock(sd);
+ return status;
+ }
+
+ sdstd_cmd_getrsp(sd, &rsp5, 1);
+ if (sdstd_rreg16 (sd, SD_ErrorIntrStatus) != 0) {
+ sd_err(("%s: 1: ErrorintrStatus 0x%x\n",
+ __FUNCTION__, sdstd_rreg16(sd, SD_ErrorIntrStatus)));
+ }
+ if (GFIELD(rsp5, RSP5_FLAGS) != 0x10)
+ sd_err(("%s: rsp5 flags is 0x%x\t %d\n",
+ __FUNCTION__, GFIELD(rsp5, RSP5_FLAGS), func));
+
+ if (GFIELD(rsp5, RSP5_STUFF))
+ sd_err(("%s: rsp5 stuff is 0x%x: should be 0\n",
+ __FUNCTION__, GFIELD(rsp5, RSP5_STUFF)));
+
+ if (rw == SDIOH_READ)
+ *byte = GFIELD(rsp5, RSP5_DATA);
+
+ sdstd_unlock(sd);
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_request_word(sdioh_info_t *sd, uint cmd_type, uint rw, uint func, uint addr,
+ uint32 *word, uint nbytes)
+{
+ int status;
+ bool swap = FALSE;
+
+ sdstd_lock(sd);
+
+ if (rw == SDIOH_READ) {
+ status = sdstd_card_regread(sd, func, addr, nbytes, word);
+ if (swap)
+ *word = BCMSWAP32(*word);
+ } else {
+ if (swap)
+ *word = BCMSWAP32(*word);
+ status = sdstd_card_regwrite(sd, func, addr, nbytes, *word);
+ }
+
+ sdstd_unlock(sd);
+ return (status == SUCCESS ? SDIOH_API_RC_SUCCESS : SDIOH_API_RC_FAIL);
+}
+
+extern SDIOH_API_RC
+sdioh_request_buffer(sdioh_info_t *sd, uint pio_dma, uint fix_inc, uint rw, uint func,
+ uint addr, uint reg_width, uint buflen_u, uint8 *buffer, void *pkt)
+{
+ int len;
+ int buflen = (int)buflen_u;
+ bool fifo = (fix_inc == SDIOH_DATA_FIX);
+ uint8 *localbuf = NULL, *tmpbuf = NULL;
+ uint tmplen = 0;
+ bool local_blockmode = sd->sd_blockmode;
+
+ sdstd_lock(sd);
+
+ ASSERT(reg_width == 4);
+ ASSERT(buflen_u < (1 << 30));
+ ASSERT(sd->client_block_size[func]);
+
+ sd_data(("%s: %c len %d r_cnt %d t_cnt %d, pkt @0x%p\n",
+ __FUNCTION__, rw == SDIOH_READ ? 'R' : 'W',
+ buflen_u, sd->r_cnt, sd->t_cnt, pkt));
+
+ /* Break buffer down into blocksize chunks:
+ * Bytemode: 1 block at a time.
+ * Blockmode: Multiples of blocksizes at a time w/ max of SD_PAGE.
+ * Both: leftovers are handled last (will be sent via bytemode).
+ */
+ while (buflen > 0) {
+ if (local_blockmode) {
+ /* Max xfer is Page size */
+ len = MIN(SD_PAGE, buflen);
+
+ /* Round down to a block boundry */
+ if (buflen > sd->client_block_size[func])
+ len = (len/sd->client_block_size[func]) *
+ sd->client_block_size[func];
+ if ((func == SDIO_FUNC_1) && ((len % 4) == 3) && (rw == SDIOH_WRITE)) {
+ tmplen = len;
+ sd_err(("%s: Rounding up buffer to mod4 length.\n", __FUNCTION__));
+ len++;
+ tmpbuf = buffer;
+ if ((localbuf = (uint8 *)MALLOC(sd->osh, len)) == NULL) {
+ sd_err(("out of memory, malloced %d bytes\n",
+ MALLOCED(sd->osh)));
+ sdstd_unlock(sd);
+ return SDIOH_API_RC_FAIL;
+ }
+ bcopy(buffer, localbuf, len);
+ buffer = localbuf;
+ }
+ } else {
+ /* Byte mode: One block at a time */
+ len = MIN(sd->client_block_size[func], buflen);
+ }
+
+ if (sdstd_card_buf(sd, rw, func, fifo, addr, len, (uint32 *)buffer) != SUCCESS) {
+ sdstd_unlock(sd);
+ return SDIOH_API_RC_FAIL;
+ }
+
+ if (local_blockmode) {
+ if ((func == SDIO_FUNC_1) && ((tmplen % 4) == 3) && (rw == SDIOH_WRITE)) {
+ if (localbuf)
+ MFREE(sd->osh, localbuf, len);
+ len--;
+ buffer = tmpbuf;
+ sd_err(("%s: Restoring back buffer ptr and len.\n", __FUNCTION__));
+ }
+ }
+
+ buffer += len;
+ buflen -= len;
+ if (!fifo)
+ addr += len;
+ }
+ sdstd_unlock(sd);
+ return SDIOH_API_RC_SUCCESS;
+}
+
+static
+int sdstd_abort(sdioh_info_t *sd, uint func)
+{
+ int err = 0;
+ int retries;
+
+ uint16 cmd_reg;
+ uint32 cmd_arg;
+ uint32 rsp5;
+ uint8 rflags;
+
+ uint16 int_reg = 0;
+ uint16 plain_intstatus;
+
+ /* Argument is write to F0 (CCCR) IOAbort with function number */
+ cmd_arg = 0;
+ cmd_arg = SFIELD(cmd_arg, CMD52_FUNCTION, SDIO_FUNC_0);
+ cmd_arg = SFIELD(cmd_arg, CMD52_REG_ADDR, SDIOD_CCCR_IOABORT);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RW_FLAG, SD_IO_OP_WRITE);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RAW, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD52_DATA, func);
+
+ /* Command is CMD52 write */
+ cmd_reg = 0;
+ cmd_reg = SFIELD(cmd_reg, CMD_RESP_TYPE, RESP_TYPE_48_BUSY);
+ cmd_reg = SFIELD(cmd_reg, CMD_CRC_EN, 1);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX_EN, 1);
+ cmd_reg = SFIELD(cmd_reg, CMD_DATA_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_TYPE, CMD_TYPE_ABORT);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX, SDIOH_CMD_52);
+
+ if (sd->sd_mode == SDIOH_MODE_SPI) {
+ cmd_reg = SFIELD(cmd_reg, CMD_CRC_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX_EN, 0);
+ }
+
+ /* Wait for CMD_INHIBIT to go away as per spec section 3.6.1.1 */
+ retries = RETRIES_SMALL;
+ while (GFIELD(sdstd_rreg(sd, SD_PresentState), PRES_CMD_INHIBIT)) {
+ if (retries == RETRIES_SMALL)
+ sd_err(("%s: Waiting for Command Inhibit, state 0x%08x\n",
+ __FUNCTION__, sdstd_rreg(sd, SD_PresentState)));
+ if (!--retries) {
+ sd_err(("%s: Command Inhibit timeout, state 0x%08x\n",
+ __FUNCTION__, sdstd_rreg(sd, SD_PresentState)));
+ if (trap_errs)
+ ASSERT(0);
+ err = BCME_SDIO_ERROR;
+ goto done;
+ }
+ }
+
+ /* Clear errors from any previous commands */
+ if ((plain_intstatus = sdstd_rreg16(sd, SD_ErrorIntrStatus)) != 0) {
+ sd_err(("abort: clearing errstat 0x%04x\n", plain_intstatus));
+ sdstd_wreg16(sd, SD_ErrorIntrStatus, plain_intstatus);
+ }
+ plain_intstatus = sdstd_rreg16(sd, SD_IntrStatus);
+ if (plain_intstatus & ~(SFIELD(0, INTSTAT_CARD_INT, 1))) {
+ sd_err(("abort: intstatus 0x%04x\n", plain_intstatus));
+ if (GFIELD(plain_intstatus, INTSTAT_CMD_COMPLETE)) {
+ sd_err(("SDSTD_ABORT: CMD COMPLETE SET BEFORE COMMAND GIVEN!!!\n"));
+ }
+ if (GFIELD(plain_intstatus, INTSTAT_CARD_REMOVAL)) {
+ sd_err(("SDSTD_ABORT: INTSTAT_CARD_REMOVAL\n"));
+ err = BCME_NODEVICE;
+ goto done;
+ }
+ }
+
+ /* Issue the command */
+ sdstd_wreg(sd, SD_Arg0, cmd_arg);
+ sdstd_wreg16(sd, SD_Command, cmd_reg);
+
+ /* In interrupt mode return, expect later CMD_COMPLETE interrupt */
+ if (!sd->polled_mode)
+ return err;
+
+ /* Otherwise, wait for the command to complete */
+ retries = RETRIES_LARGE;
+ do {
+ int_reg = sdstd_rreg16(sd, SD_IntrStatus);
+ } while (--retries &&
+ (GFIELD(int_reg, INTSTAT_ERROR_INT) == 0) &&
+ (GFIELD(int_reg, INTSTAT_CMD_COMPLETE) == 0));
+
+ /* If command completion fails, do a cmd reset and note the error */
+ if (!retries) {
+ sd_err(("%s: CMD_COMPLETE timeout: intr 0x%04x err 0x%04x state 0x%08x\n",
+ __FUNCTION__, int_reg,
+ sdstd_rreg16(sd, SD_ErrorIntrStatus),
+ sdstd_rreg(sd, SD_PresentState)));
+
+ sdstd_wreg8(sd, SD_SoftwareReset, SFIELD(0, SW_RESET_CMD, 1));
+ retries = RETRIES_LARGE;
+ do {
+ sd_trace(("%s: waiting for CMD line reset\n", __FUNCTION__));
+ } while ((GFIELD(sdstd_rreg8(sd, SD_SoftwareReset),
+ SW_RESET_CMD)) && retries--);
+
+ if (!retries) {
+ sd_err(("%s: Timeout waiting for CMD line reset\n", __FUNCTION__));
+ }
+
+ if (trap_errs)
+ ASSERT(0);
+
+ err = BCME_SDIO_ERROR;
+ }
+
+ /* Clear Command Complete interrupt */
+ int_reg = SFIELD(0, INTSTAT_CMD_COMPLETE, 1);
+ sdstd_wreg16(sd, SD_IntrStatus, int_reg);
+
+ /* Check for Errors */
+ if ((plain_intstatus = sdstd_rreg16 (sd, SD_ErrorIntrStatus)) != 0) {
+ sd_err(("%s: ErrorintrStatus: 0x%x, "
+ "(intrstatus = 0x%x, present state 0x%x) clearing\n",
+ __FUNCTION__, plain_intstatus,
+ sdstd_rreg16(sd, SD_IntrStatus),
+ sdstd_rreg(sd, SD_PresentState)));
+
+ sdstd_wreg16(sd, SD_ErrorIntrStatus, plain_intstatus);
+
+ sdstd_wreg8(sd, SD_SoftwareReset, SFIELD(0, SW_RESET_DAT, 1));
+ retries = RETRIES_LARGE;
+ do {
+ sd_trace(("%s: waiting for DAT line reset\n", __FUNCTION__));
+ } while ((GFIELD(sdstd_rreg8(sd, SD_SoftwareReset),
+ SW_RESET_DAT)) && retries--);
+
+ if (!retries) {
+ sd_err(("%s: Timeout waiting for DAT line reset\n", __FUNCTION__));
+ }
+
+ if (trap_errs)
+ ASSERT(0);
+
+ /* ABORT is dataless, only cmd errs count */
+ if (plain_intstatus & ERRINT_CMD_ERRS)
+ err = BCME_SDIO_ERROR;
+ }
+
+ /* If command failed don't bother looking at response */
+ if (err)
+ goto done;
+
+ /* Otherwise, check the response */
+ sdstd_cmd_getrsp(sd, &rsp5, 1);
+ rflags = GFIELD(rsp5, RSP5_FLAGS);
+
+ if (rflags & SD_RSP_R5_ERRBITS) {
+ sd_err(("%s: R5 flags include errbits: 0x%02x\n", __FUNCTION__, rflags));
+
+ /* The CRC error flag applies to the previous command */
+ if (rflags & (SD_RSP_R5_ERRBITS & ~SD_RSP_R5_COM_CRC_ERROR)) {
+ err = BCME_SDIO_ERROR;
+ goto done;
+ }
+ }
+
+ if (((rflags & (SD_RSP_R5_IO_CURRENTSTATE0 | SD_RSP_R5_IO_CURRENTSTATE1)) != 0x10) &&
+ ((rflags & (SD_RSP_R5_IO_CURRENTSTATE0 | SD_RSP_R5_IO_CURRENTSTATE1)) != 0x20)) {
+ sd_err(("%s: R5 flags has bad state: 0x%02x\n", __FUNCTION__, rflags));
+ err = BCME_SDIO_ERROR;
+ goto done;
+ }
+
+ if (GFIELD(rsp5, RSP5_STUFF)) {
+ sd_err(("%s: rsp5 stuff is 0x%x: should be 0\n",
+ __FUNCTION__, GFIELD(rsp5, RSP5_STUFF)));
+ err = BCME_SDIO_ERROR;
+ goto done;
+ }
+
+done:
+ if (err == BCME_NODEVICE)
+ return err;
+
+ sdstd_wreg8(sd, SD_SoftwareReset,
+ SFIELD(SFIELD(0, SW_RESET_DAT, 1), SW_RESET_CMD, 1));
+
+ retries = RETRIES_LARGE;
+ do {
+ rflags = sdstd_rreg8(sd, SD_SoftwareReset);
+ if (!GFIELD(rflags, SW_RESET_DAT) && !GFIELD(rflags, SW_RESET_CMD))
+ break;
+ } while (--retries);
+
+ if (!retries) {
+ sd_err(("%s: Timeout waiting for DAT/CMD reset: 0x%02x\n",
+ __FUNCTION__, rflags));
+ err = BCME_SDIO_ERROR;
+ }
+
+ return err;
+}
+
+extern int
+sdioh_abort(sdioh_info_t *sd, uint fnum)
+{
+ int ret;
+
+ sdstd_lock(sd);
+ ret = sdstd_abort(sd, fnum);
+ sdstd_unlock(sd);
+
+ return ret;
+}
+
+int
+sdioh_start(sdioh_info_t *sd, int stage)
+{
+ return SUCCESS;
+}
+
+int
+sdioh_stop(sdioh_info_t *sd)
+{
+ return SUCCESS;
+}
+
+static int
+sdstd_check_errs(sdioh_info_t *sdioh_info, uint32 cmd, uint32 arg)
+{
+ uint16 regval;
+ uint retries;
+ uint function = 0;
+
+ /* If no errors, we're done */
+ if ((regval = sdstd_rreg16(sdioh_info, SD_ErrorIntrStatus)) == 0)
+ return SUCCESS;
+
+ sd_info(("%s: ErrorIntrStatus 0x%04x (clearing), IntrStatus 0x%04x PresentState 0x%08x\n",
+ __FUNCTION__, regval, sdstd_rreg16(sdioh_info, SD_IntrStatus),
+ sdstd_rreg(sdioh_info, SD_PresentState)));
+ sdstd_wreg16(sdioh_info, SD_ErrorIntrStatus, regval);
+
+ /* On command error, issue CMD reset */
+ if (regval & ERRINT_CMD_ERRS) {
+ sd_trace(("%s: issuing CMD reset\n", __FUNCTION__));
+ sdstd_wreg8(sdioh_info, SD_SoftwareReset, SFIELD(0, SW_RESET_CMD, 1));
+ for (retries = RETRIES_LARGE; retries; retries--)
+ if (!(GFIELD(sdstd_rreg8(sdioh_info, SD_SoftwareReset), SW_RESET_CMD)))
+ break;
+ if (!retries) {
+ sd_err(("%s: Timeout waiting for CMD line reset\n", __FUNCTION__));
+ }
+ }
+
+ /* On data error, issue DAT reset */
+ if (regval & ERRINT_DATA_ERRS) {
+ sd_trace(("%s: issuing DAT reset\n", __FUNCTION__));
+ sdstd_wreg8(sdioh_info, SD_SoftwareReset, SFIELD(0, SW_RESET_DAT, 1));
+ for (retries = RETRIES_LARGE; retries; retries--)
+ if (!(GFIELD(sdstd_rreg8(sdioh_info, SD_SoftwareReset), SW_RESET_DAT)))
+ break;
+ if (!retries) {
+ sd_err(("%s: Timeout waiting for DAT line reset\n", __FUNCTION__));
+ }
+ }
+
+ /* For an IO command (CMD52 or CMD53) issue an abort to the appropriate function */
+ if (cmd == SDIOH_CMD_53)
+ function = GFIELD(arg, CMD53_FUNCTION);
+ else if (cmd == SDIOH_CMD_52)
+ function = GFIELD(arg, CMD52_FUNCTION);
+ if (function) {
+ sd_trace(("%s: requesting abort for function %d after cmd %d\n",
+ __FUNCTION__, function, cmd));
+ sdstd_abort(sdioh_info, function);
+ }
+
+ if (trap_errs)
+ ASSERT(0);
+
+ return ERROR;
+}
+
+
+
+/*
+ * Private/Static work routines
+ */
+static bool
+sdstd_reset(sdioh_info_t *sd, bool host_reset, bool client_reset)
+{
+ int retries = RETRIES_LARGE;
+ uchar regval;
+
+ if (!sd)
+ return TRUE;
+
+ sdstd_lock(sd);
+ /* Reset client card */
+ if (client_reset && (sd->adapter_slot != -1)) {
+ if (sdstd_card_regwrite(sd, 0, SDIOD_CCCR_IOABORT, 1, 0x8) != SUCCESS)
+ sd_err(("%s: Cannot write to card reg 0x%x\n",
+ __FUNCTION__, SDIOD_CCCR_IOABORT));
+ else
+ sd->card_rca = 0;
+ }
+
+ /* Reset host controller */
+ if (host_reset) {
+ regval = SFIELD(0, SW_RESET_ALL, 1);
+ sdstd_wreg8(sd, SD_SoftwareReset, regval);
+ do {
+ sd_trace(("%s: waiting for reset\n", __FUNCTION__));
+ } while ((sdstd_rreg8(sd, SD_SoftwareReset) & regval) && retries--);
+
+ if (!retries) {
+ sd_err(("%s: Timeout waiting for host reset\n", __FUNCTION__));
+ sdstd_unlock(sd);
+ return (FALSE);
+ }
+
+ /* A reset should reset bus back to 1 bit mode */
+ sd->sd_mode = SDIOH_MODE_SD1;
+ sdstd_set_dma_mode(sd, sd->sd_dma_mode);
+ }
+ sdstd_unlock(sd);
+ return TRUE;
+}
+
+/* Disable device interrupt */
+void
+sdstd_devintr_off(sdioh_info_t *sd)
+{
+ sd_trace(("%s: %d\n", __FUNCTION__, sd->use_client_ints));
+ if (sd->use_client_ints) {
+ sd->intmask &= ~CLIENT_INTR;
+ sdstd_wreg16(sd, SD_IntrSignalEnable, sd->intmask);
+ sdstd_rreg16(sd, SD_IntrSignalEnable); /* Sync readback */
+ }
+}
+
+/* Enable device interrupt */
+void
+sdstd_devintr_on(sdioh_info_t *sd)
+{
+ ASSERT(sd->lockcount == 0);
+ sd_trace(("%s: %d\n", __FUNCTION__, sd->use_client_ints));
+ if (sd->use_client_ints) {
+ uint16 status = sdstd_rreg16(sd, SD_IntrStatusEnable);
+ sdstd_wreg16(sd, SD_IntrStatusEnable, SFIELD(status, INTSTAT_CARD_INT, 0));
+ sdstd_wreg16(sd, SD_IntrStatusEnable, status);
+
+ sd->intmask |= CLIENT_INTR;
+ sdstd_wreg16(sd, SD_IntrSignalEnable, sd->intmask);
+ sdstd_rreg16(sd, SD_IntrSignalEnable); /* Sync readback */
+ }
+}
+
+#ifdef BCMSDYIELD
+/* Enable/disable other interrupts */
+void
+sdstd_intrs_on(sdioh_info_t *sd, uint16 norm, uint16 err)
+{
+ if (err) {
+ norm = SFIELD(norm, INTSTAT_ERROR_INT, 1);
+ sdstd_wreg16(sd, SD_ErrorIntrSignalEnable, err);
+ }
+
+ sd->intmask |= norm;
+ sdstd_wreg16(sd, SD_IntrSignalEnable, sd->intmask);
+ if (sd_forcerb)
+ sdstd_rreg16(sd, SD_IntrSignalEnable); /* Sync readback */
+}
+
+void
+sdstd_intrs_off(sdioh_info_t *sd, uint16 norm, uint16 err)
+{
+ if (err) {
+ norm = SFIELD(norm, INTSTAT_ERROR_INT, 1);
+ sdstd_wreg16(sd, SD_ErrorIntrSignalEnable, 0);
+ }
+
+ sd->intmask &= ~norm;
+ sdstd_wreg16(sd, SD_IntrSignalEnable, sd->intmask);
+ if (sd_forcerb)
+ sdstd_rreg16(sd, SD_IntrSignalEnable); /* Sync readback */
+}
+#endif /* BCMSDYIELD */
+
+static int
+sdstd_host_init(sdioh_info_t *sd)
+{
+ int num_slots, full_slot;
+ uint8 reg8;
+
+ uint32 card_ins;
+ int slot, first_bar = 0;
+ bool detect_slots = FALSE;
+ uint bar;
+
+ /* Check for Arasan ID */
+ if ((OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_VID, 4) & 0xFFFF) == VENDOR_SI_IMAGE) {
+ sd_info(("%s: Found Arasan Standard SDIO Host Controller\n", __FUNCTION__));
+ sd->controller_type = SDIOH_TYPE_ARASAN_HDK;
+ detect_slots = TRUE;
+ } else if ((OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_VID, 4) & 0xFFFF) == VENDOR_BROADCOM) {
+ sd_info(("%s: Found Broadcom 27xx Standard SDIO Host Controller\n", __FUNCTION__));
+ sd->controller_type = SDIOH_TYPE_BCM27XX;
+ detect_slots = FALSE;
+ } else if ((OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_VID, 4) & 0xFFFF) == VENDOR_TI) {
+ sd_info(("%s: Found TI PCIxx21 Standard SDIO Host Controller\n", __FUNCTION__));
+ sd->controller_type = SDIOH_TYPE_TI_PCIXX21;
+ detect_slots = TRUE;
+ } else if ((OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_VID, 4) & 0xFFFF) == VENDOR_RICOH) {
+ sd_info(("%s: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter\n",
+ __FUNCTION__));
+ sd->controller_type = SDIOH_TYPE_RICOH_R5C822;
+ detect_slots = TRUE;
+ } else if ((OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_VID, 4) & 0xFFFF) == VENDOR_JMICRON) {
+ sd_info(("%s: JMicron Standard SDIO Host Controller\n",
+ __FUNCTION__));
+ sd->controller_type = SDIOH_TYPE_JMICRON;
+ detect_slots = TRUE;
+ } else {
+ return ERROR;
+ }
+
+ /*
+ * Determine num of slots
+ * Search each slot
+ */
+
+ first_bar = OSL_PCI_READ_CONFIG(sd->osh, SD_SlotInfo, 4) & 0x7;
+ num_slots = (OSL_PCI_READ_CONFIG(sd->osh, SD_SlotInfo, 4) & 0xff) >> 4;
+ num_slots &= 7;
+ num_slots++; /* map bits to num slots according to spec */
+
+ if (OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_VID, 4) ==
+ ((SDIOH_FPGA_ID << 16) | VENDOR_BROADCOM)) {
+ sd_err(("%s: Found Broadcom Standard SDIO Host Controller FPGA\n", __FUNCTION__));
+ /* Set BAR0 Window to SDIOSTH core */
+ OSL_PCI_WRITE_CONFIG(sd->osh, PCI_BAR0_WIN, 4, 0x18001000);
+
+ /* Set defaults particular to this controller. */
+ detect_slots = TRUE;
+ num_slots = 1;
+ first_bar = 0;
+
+ /* Controller supports ADMA2, so turn it on here. */
+ sd->sd_dma_mode = DMA_MODE_ADMA2;
+ }
+
+ /* Map in each slot on the board and query it to see if a
+ * card is inserted. Use the first populated slot found.
+ */
+ if (sd->mem_space) {
+ sdstd_reg_unmap(sd->osh, (uintptr)sd->mem_space, SDIOH_REG_WINSZ);
+ sd->mem_space = NULL;
+ }
+
+ full_slot = -1;
+
+ for (slot = 0; slot < num_slots; slot++) {
+ bar = OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_BAR0 + (4*(slot + first_bar)), 4);
+ sd->mem_space = (volatile char *)sdstd_reg_map(sd->osh,
+ (uintptr)bar, SDIOH_REG_WINSZ);
+
+ sd->adapter_slot = -1;
+
+ if (detect_slots) {
+ card_ins = GFIELD(sdstd_rreg(sd, SD_PresentState), PRES_CARD_PRESENT);
+ } else {
+ card_ins = TRUE;
+ }
+
+ if (card_ins) {
+ sd_info(("%s: SDIO slot %d: Full\n", __FUNCTION__, slot));
+ if (full_slot < 0)
+ full_slot = slot;
+ } else {
+ sd_info(("%s: SDIO slot %d: Empty\n", __FUNCTION__, slot));
+ }
+
+ if (sd->mem_space) {
+ sdstd_reg_unmap(sd->osh, (uintptr)sd->mem_space, SDIOH_REG_WINSZ);
+ sd->mem_space = NULL;
+ }
+ }
+
+ if (full_slot < 0) {
+ sd_err(("No slots on SDIO controller are populated\n"));
+ return -1;
+ }
+
+ bar = OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_BAR0 + (4*(full_slot + first_bar)), 4);
+ sd->mem_space = (volatile char *)sdstd_reg_map(sd->osh, (uintptr)bar, SDIOH_REG_WINSZ);
+
+ sd_err(("Using slot %d at BAR%d [0x%08x] mem_space 0x%p\n",
+ full_slot,
+ (full_slot + first_bar),
+ OSL_PCI_READ_CONFIG(sd->osh, PCI_CFG_BAR0 + (4*(full_slot + first_bar)), 4),
+ sd->mem_space));
+
+
+ sd->adapter_slot = full_slot;
+
+ sd->version = sdstd_rreg16(sd, SD_HostControllerVersion) & 0xFF;
+ switch (sd->version) {
+ case 0:
+ sd_err(("Host Controller version 1.0, Vendor Revision: 0x%02x\n",
+ sdstd_rreg16(sd, SD_HostControllerVersion) >> 8));
+ break;
+ case 1:
+ case 2:
+ sd_err(("Host Controller version 2.0, Vendor Revision: 0x%02x\n",
+ sdstd_rreg16(sd, SD_HostControllerVersion) >> 8));
+ break;
+ default:
+ sd_err(("%s: Host Controller version 0x%02x not supported.\n",
+ __FUNCTION__, sd->version));
+ break;
+ }
+
+ sd->caps = sdstd_rreg(sd, SD_Capabilities); /* Cache this for later use */
+ sd->curr_caps = sdstd_rreg(sd, SD_MaxCurCap);
+
+ sdstd_set_dma_mode(sd, sd->sd_dma_mode);
+
+
+ sdstd_reset(sd, 1, 0);
+
+ /* Read SD4/SD1 mode */
+ if ((reg8 = sdstd_rreg8(sd, SD_HostCntrl))) {
+ if (reg8 & SD4_MODE) {
+ sd_err(("%s: Host cntrlr already in 4 bit mode: 0x%x\n",
+ __FUNCTION__, reg8));
+ }
+ }
+
+ /* Default power on mode is SD1 */
+ sd->sd_mode = SDIOH_MODE_SD1;
+ sd->polled_mode = TRUE;
+ sd->host_init_done = TRUE;
+ sd->card_init_done = FALSE;
+ sd->adapter_slot = full_slot;
+
+ return (SUCCESS);
+}
+#define CMD5_RETRIES 200
+static int
+get_ocr(sdioh_info_t *sd, uint32 *cmd_arg, uint32 *cmd_rsp)
+{
+ int retries, status;
+
+ /* Get the Card's Operation Condition. Occasionally the board
+ * takes a while to become ready
+ */
+ retries = CMD5_RETRIES;
+ do {
+ *cmd_rsp = 0;
+ if ((status = sdstd_cmd_issue(sd, USE_DMA(sd), SDIOH_CMD_5, *cmd_arg))
+ != SUCCESS) {
+ sd_err(("%s: CMD5 failed\n", __FUNCTION__));
+ return status;
+ }
+ sdstd_cmd_getrsp(sd, cmd_rsp, 1);
+ if (!GFIELD(*cmd_rsp, RSP4_CARD_READY))
+ sd_trace(("%s: Waiting for card to become ready\n", __FUNCTION__));
+ } while ((!GFIELD(*cmd_rsp, RSP4_CARD_READY)) && --retries);
+ if (!retries)
+ return ERROR;
+
+ return (SUCCESS);
+}
+
+static int
+sdstd_client_init(sdioh_info_t *sd)
+{
+ uint32 cmd_arg, cmd_rsp;
+ int status;
+ uint8 fn_ints;
+
+
+ sd_trace(("%s: Powering up slot %d\n", __FUNCTION__, sd->adapter_slot));
+
+ /* Clear any pending ints */
+ sdstd_wreg16(sd, SD_IntrStatus, 0x1ff);
+ sdstd_wreg16(sd, SD_ErrorIntrStatus, 0x0fff);
+
+ /* Enable both Normal and Error Status. This does not enable
+ * interrupts, it only enables the status bits to
+ * become 'live'
+ */
+ sdstd_wreg16(sd, SD_IntrStatusEnable, 0x1ff);
+ sdstd_wreg16(sd, SD_ErrorIntrStatusEnable, 0xffff);
+
+ sdstd_wreg16(sd, SD_IntrSignalEnable, 0); /* Disable ints for now. */
+
+ /* Start at ~400KHz clock rate for initialization */
+ if (!sdstd_start_clock(sd, 128)) {
+ sd_err(("sdstd_start_clock failed\n"));
+ return ERROR;
+ }
+ if (!sdstd_start_power(sd)) {
+ sd_err(("sdstd_start_power failed\n"));
+ return ERROR;
+ }
+
+ if (sd->num_funcs == 0) {
+ sd_err(("%s: No IO funcs!\n", __FUNCTION__));
+ return ERROR;
+ }
+
+ /* In SPI mode, issue CMD0 first */
+ if (sd->sd_mode == SDIOH_MODE_SPI) {
+ cmd_arg = 0;
+ if ((status = sdstd_cmd_issue(sd, USE_DMA(sd), SDIOH_CMD_0, cmd_arg))
+ != SUCCESS) {
+ sd_err(("BCMSDIOH: cardinit: CMD0 failed!\n"));
+ return status;
+ }
+ }
+
+ if (sd->sd_mode != SDIOH_MODE_SPI) {
+ uint16 rsp6_status;
+
+ /* Card is operational. Ask it to send an RCA */
+ cmd_arg = 0;
+ if ((status = sdstd_cmd_issue(sd, USE_DMA(sd), SDIOH_CMD_3, cmd_arg))
+ != SUCCESS) {
+ sd_err(("%s: CMD3 failed!\n", __FUNCTION__));
+ return status;
+ }
+
+ /* Verify the card status returned with the cmd response */
+ sdstd_cmd_getrsp(sd, &cmd_rsp, 1);
+ rsp6_status = GFIELD(cmd_rsp, RSP6_STATUS);
+ if (GFIELD(rsp6_status, RSP6STAT_COM_CRC_ERROR) ||
+ GFIELD(rsp6_status, RSP6STAT_ILLEGAL_CMD) ||
+ GFIELD(rsp6_status, RSP6STAT_ERROR)) {
+ sd_err(("%s: CMD3 response error. Response = 0x%x!\n",
+ __FUNCTION__, rsp6_status));
+ return ERROR;
+ }
+
+ /* Save the Card's RCA */
+ sd->card_rca = GFIELD(cmd_rsp, RSP6_IO_RCA);
+ sd_info(("RCA is 0x%x\n", sd->card_rca));
+
+ if (rsp6_status)
+ sd_err(("raw status is 0x%x\n", rsp6_status));
+
+ /* Select the card */
+ cmd_arg = SFIELD(0, CMD7_RCA, sd->card_rca);
+ if ((status = sdstd_cmd_issue(sd, USE_DMA(sd), SDIOH_CMD_7, cmd_arg))
+ != SUCCESS) {
+ sd_err(("%s: CMD7 failed!\n", __FUNCTION__));
+ return status;
+ }
+ sdstd_cmd_getrsp(sd, &cmd_rsp, 1);
+ if (cmd_rsp != SDIOH_CMD7_EXP_STATUS) {
+ sd_err(("%s: CMD7 response error. Response = 0x%x!\n",
+ __FUNCTION__, cmd_rsp));
+ return ERROR;
+ }
+ }
+
+ sdstd_card_enablefuncs(sd);
+
+ if (!sdstd_bus_width(sd, sd_sdmode)) {
+ sd_err(("sdstd_bus_width failed\n"));
+ return ERROR;
+ }
+
+ set_client_block_size(sd, 1, BLOCK_SIZE_4318);
+ fn_ints = INTR_CTL_FUNC1_EN;
+
+ if (sd->num_funcs >= 2) {
+ set_client_block_size(sd, 2, sd_f2_blocksize /* BLOCK_SIZE_4328 */);
+ fn_ints |= INTR_CTL_FUNC2_EN;
+ }
+
+ /* Enable/Disable Client interrupts */
+ /* Turn on here but disable at host controller? */
+ if (sdstd_card_regwrite(sd, 0, SDIOD_CCCR_INTEN, 1,
+ (fn_ints | INTR_CTL_MASTER_EN)) != SUCCESS) {
+ sd_err(("%s: Could not enable ints in CCCR\n", __FUNCTION__));
+ return ERROR;
+ }
+
+ /* Switch to High-speed clocking mode if both host and device support it */
+ sdstd_set_highspeed_mode(sd, (bool)sd_hiok);
+
+ /* After configuring for High-Speed mode, set the desired clock rate. */
+ if (!sdstd_start_clock(sd, (uint16)sd_divisor)) {
+ sd_err(("sdstd_start_clock failed\n"));
+ return ERROR;
+ }
+
+ sd->card_init_done = TRUE;
+
+ return SUCCESS;
+}
+
+static int
+sdstd_set_highspeed_mode(sdioh_info_t *sd, bool HSMode)
+{
+ uint32 regdata;
+ int status;
+ uint8 reg8;
+
+ reg8 = sdstd_rreg8(sd, SD_HostCntrl);
+
+
+ if (HSMode == TRUE) {
+ if (sd_hiok && (GFIELD(sd->caps, CAP_HIGHSPEED)) == 0) {
+ sd_err(("Host Controller does not support hi-speed mode.\n"));
+ return BCME_ERROR;
+ }
+
+ sd_info(("Attempting to enable High-Speed mode.\n"));
+
+ if ((status = sdstd_card_regread(sd, 0, SDIOD_CCCR_SPEED_CONTROL,
+ 1, ®data)) != SUCCESS) {
+ return BCME_SDIO_ERROR;
+ }
+ if (regdata & SDIO_SPEED_SHS) {
+ sd_info(("Device supports High-Speed mode.\n"));
+
+ regdata |= SDIO_SPEED_EHS;
+
+ sd_info(("Writing %08x to Card at %08x\n",
+ regdata, SDIOD_CCCR_SPEED_CONTROL));
+ if ((status = sdstd_card_regwrite(sd, 0, SDIOD_CCCR_SPEED_CONTROL,
+ 1, regdata)) != BCME_OK) {
+ return BCME_SDIO_ERROR;
+ }
+
+ if ((status = sdstd_card_regread(sd, 0, SDIOD_CCCR_SPEED_CONTROL,
+ 1, ®data)) != BCME_OK) {
+ return BCME_SDIO_ERROR;
+ }
+
+ sd_info(("Read %08x to Card at %08x\n", regdata, SDIOD_CCCR_SPEED_CONTROL));
+
+ reg8 = SFIELD(reg8, HOST_HI_SPEED_EN, 1);
+
+ sd_err(("High-speed clocking mode enabled.\n"));
+ }
+ else {
+ sd_err(("Device does not support High-Speed Mode.\n"));
+ reg8 = SFIELD(reg8, HOST_HI_SPEED_EN, 0);
+ }
+ } else {
+ /* Force off device bit */
+ if ((status = sdstd_card_regread(sd, 0, SDIOD_CCCR_SPEED_CONTROL,
+ 1, ®data)) != BCME_OK) {
+ return status;
+ }
+ if (regdata & SDIO_SPEED_EHS) {
+ regdata &= ~SDIO_SPEED_EHS;
+ if ((status = sdstd_card_regwrite(sd, 0, SDIOD_CCCR_SPEED_CONTROL,
+ 1, regdata)) != BCME_OK) {
+ return status;
+ }
+ }
+
+ sd_err(("High-speed clocking mode disabled.\n"));
+ reg8 = SFIELD(reg8, HOST_HI_SPEED_EN, 0);
+ }
+
+ sdstd_wreg8(sd, SD_HostCntrl, reg8);
+
+ return BCME_OK;
+}
+
+/* Select DMA Mode:
+ * If dma_mode == DMA_MODE_AUTO, pick the "best" mode.
+ * Otherwise, pick the selected mode if supported.
+ * If not supported, use PIO mode.
+ */
+static int
+sdstd_set_dma_mode(sdioh_info_t *sd, int8 dma_mode)
+{
+ uint8 reg8, dma_sel_bits = SDIOH_SDMA_MODE;
+ int8 prev_dma_mode = sd->sd_dma_mode;
+
+ switch (prev_dma_mode) {
+ case DMA_MODE_AUTO:
+ sd_dma(("%s: Selecting best DMA mode supported by controller.\n",
+ __FUNCTION__));
+ if (GFIELD(sd->caps, CAP_ADMA2)) {
+ sd->sd_dma_mode = DMA_MODE_ADMA2;
+ dma_sel_bits = SDIOH_ADMA2_MODE;
+ } else if (GFIELD(sd->caps, CAP_ADMA1)) {
+ sd->sd_dma_mode = DMA_MODE_ADMA1;
+ dma_sel_bits = SDIOH_ADMA1_MODE;
+ } else if (GFIELD(sd->caps, CAP_DMA)) {
+ sd->sd_dma_mode = DMA_MODE_SDMA;
+ } else {
+ sd->sd_dma_mode = DMA_MODE_NONE;
+ }
+ break;
+ case DMA_MODE_NONE:
+ sd->sd_dma_mode = DMA_MODE_NONE;
+ break;
+ case DMA_MODE_SDMA:
+ if (GFIELD(sd->caps, CAP_DMA)) {
+ sd->sd_dma_mode = DMA_MODE_SDMA;
+ } else {
+ sd_err(("%s: SDMA not supported by controller.\n", __FUNCTION__));
+ sd->sd_dma_mode = DMA_MODE_NONE;
+ }
+ break;
+ case DMA_MODE_ADMA1:
+ if (GFIELD(sd->caps, CAP_ADMA1)) {
+ sd->sd_dma_mode = DMA_MODE_ADMA1;
+ dma_sel_bits = SDIOH_ADMA1_MODE;
+ } else {
+ sd_err(("%s: ADMA1 not supported by controller.\n", __FUNCTION__));
+ sd->sd_dma_mode = DMA_MODE_NONE;
+ }
+ break;
+ case DMA_MODE_ADMA2:
+ if (GFIELD(sd->caps, CAP_ADMA2)) {
+ sd->sd_dma_mode = DMA_MODE_ADMA2;
+ dma_sel_bits = SDIOH_ADMA2_MODE;
+ } else {
+ sd_err(("%s: ADMA2 not supported by controller.\n", __FUNCTION__));
+ sd->sd_dma_mode = DMA_MODE_NONE;
+ }
+ break;
+ case DMA_MODE_ADMA2_64:
+ sd_err(("%s: 64b ADMA2 not supported by driver.\n", __FUNCTION__));
+ sd->sd_dma_mode = DMA_MODE_NONE;
+ break;
+ default:
+ sd_err(("%s: Unsupported DMA Mode %d requested.\n", __FUNCTION__,
+ prev_dma_mode));
+ sd->sd_dma_mode = DMA_MODE_NONE;
+ break;
+ }
+
+ /* clear SysAddr, only used for SDMA */
+ sdstd_wreg(sd, SD_SysAddr, 0);
+
+ sd_err(("%s: %s mode selected.\n", __FUNCTION__, dma_mode_description[sd->sd_dma_mode]));
+
+ reg8 = sdstd_rreg8(sd, SD_HostCntrl);
+ reg8 = SFIELD(reg8, HOST_DMA_SEL, dma_sel_bits);
+ sdstd_wreg8(sd, SD_HostCntrl, reg8);
+ sd_dma(("%s: SD_HostCntrl=0x%02x\n", __FUNCTION__, reg8));
+
+ return BCME_OK;
+}
+
+
+bool
+sdstd_start_clock(sdioh_info_t *sd, uint16 new_sd_divisor)
+{
+ uint rc, count;
+ uint16 divisor;
+
+ /* turn off HC clock */
+ sdstd_wreg16(sd, SD_ClockCntrl,
+ sdstd_rreg16(sd, SD_ClockCntrl) & ~((uint16)0x4)); /* Disable the HC clock */
+
+ /* Set divisor */
+
+ divisor = (new_sd_divisor >> 1) << 8;
+
+ sd_info(("Clock control is 0x%x\n", sdstd_rreg16(sd, SD_ClockCntrl)));
+ sdstd_mod_reg16(sd, SD_ClockCntrl, 0xff00, divisor);
+ sd_info(("%s: Using clock divisor of %d (regval 0x%04x)\n", __FUNCTION__,
+ new_sd_divisor, divisor));
+
+ sd_info(("Primary Clock Freq = %d MHz\n", GFIELD(sd->caps, CAP_TO_CLKFREQ)));
+
+ if (GFIELD(sd->caps, CAP_TO_CLKFREQ) == 50) {
+ sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,
+ ((50 % new_sd_divisor) ? (50000 / new_sd_divisor) : (50 / new_sd_divisor)),
+ ((50 % new_sd_divisor) ? "KHz" : "MHz")));
+ } else if (GFIELD(sd->caps, CAP_TO_CLKFREQ) == 48) {
+ sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,
+ ((48 % new_sd_divisor) ? (48000 / new_sd_divisor) : (48 / new_sd_divisor)),
+ ((48 % new_sd_divisor) ? "KHz" : "MHz")));
+ } else if (GFIELD(sd->caps, CAP_TO_CLKFREQ) == 33) {
+ sd_info(("%s: Resulting SDIO clock is %d %s\n", __FUNCTION__,
+ ((33 % new_sd_divisor) ? (33000 / new_sd_divisor) : (33 / new_sd_divisor)),
+ ((33 % new_sd_divisor) ? "KHz" : "MHz")));
+
+ } else if (sd->controller_type == SDIOH_TYPE_BCM27XX) {
+ } else {
+ sd_err(("Need to determine divisor for %d MHz clocks\n",
+ GFIELD(sd->caps, CAP_TO_CLKFREQ)));
+ sd_err(("Consult SD Host Controller Spec: Clock Control Register\n"));
+ return (FALSE);
+ }
+
+ sdstd_or_reg16(sd, SD_ClockCntrl, 0x1); /* Enable the clock */
+
+ /* Wait for clock to stabilize */
+ rc = (sdstd_rreg16(sd, SD_ClockCntrl) & 2);
+ count = 0;
+ while (!rc) {
+ OSL_DELAY(1);
+ sd_info(("Waiting for clock to become stable 0x%x\n", rc));
+ rc = (sdstd_rreg16(sd, SD_ClockCntrl) & 2);
+ count++;
+ if (count > 10000) {
+ sd_err(("%s:Clocks failed to stabilize after %u attempts",
+ __FUNCTION__, count));
+ return (FALSE);
+ }
+ }
+ /* Turn on clock */
+ sdstd_or_reg16(sd, SD_ClockCntrl, 0x4);
+
+ /* Set timeout control (adjust default value based on divisor).
+ * Disabling timeout interrupts during setting is advised by host spec.
+ */
+ {
+ uint16 regdata;
+ uint toval;
+
+ toval = sd_toctl;
+ divisor = new_sd_divisor;
+
+ while (toval && !(divisor & 1)) {
+ toval -= 1;
+ divisor >>= 1;
+ }
+
+ regdata = sdstd_rreg16(sd, SD_ErrorIntrStatusEnable);
+ sdstd_wreg16(sd, SD_ErrorIntrStatusEnable, (regdata & ~ERRINT_DATA_TIMEOUT_BIT));
+ sdstd_wreg8(sd, SD_TimeoutCntrl, (uint8)toval);
+ sdstd_wreg16(sd, SD_ErrorIntrStatusEnable, regdata);
+ }
+
+ OSL_DELAY(2);
+
+ sd_info(("Final Clock control is 0x%x\n", sdstd_rreg16(sd, SD_ClockCntrl)));
+
+ return TRUE;
+}
+
+bool
+sdstd_start_power(sdioh_info_t *sd)
+{
+ char *s;
+ uint32 cmd_arg;
+ uint32 cmd_rsp;
+ uint8 pwr = 0;
+ int volts;
+
+ volts = 0;
+ s = NULL;
+ if (GFIELD(sd->caps, CAP_VOLT_1_8)) {
+ volts = 5;
+ s = "1.8";
+ }
+ if (GFIELD(sd->caps, CAP_VOLT_3_0)) {
+ volts = 6;
+ s = "3.0";
+ }
+ if (GFIELD(sd->caps, CAP_VOLT_3_3)) {
+ volts = 7;
+ s = "3.3";
+ }
+
+ pwr = SFIELD(pwr, PWR_VOLTS, volts);
+ pwr = SFIELD(pwr, PWR_BUS_EN, 1);
+ sdstd_wreg8(sd, SD_PwrCntrl, pwr); /* Set Voltage level */
+ sd_info(("Setting Bus Power to %s Volts\n", s));
+
+ /* Wait for power to stabilize, Dongle takes longer than NIC. */
+ OSL_DELAY(250000);
+
+ /* Get the Card's Operation Condition. Occasionally the board
+ * takes a while to become ready
+ */
+ cmd_arg = 0;
+ cmd_rsp = 0;
+ if (get_ocr(sd, &cmd_arg, &cmd_rsp) != SUCCESS) {
+ sd_err(("%s: Failed to get OCR bailing\n", __FUNCTION__));
+ sdstd_reset(sd, 0, 1);
+ return FALSE;
+ }
+
+ sd_info(("mem_present = %d\n", GFIELD(cmd_rsp, RSP4_MEM_PRESENT)));
+ sd_info(("num_funcs = %d\n", GFIELD(cmd_rsp, RSP4_NUM_FUNCS)));
+ sd_info(("card_ready = %d\n", GFIELD(cmd_rsp, RSP4_CARD_READY)));
+ sd_info(("OCR = 0x%x\n", GFIELD(cmd_rsp, RSP4_IO_OCR)));
+
+ /* Verify that the card supports I/O mode */
+ if (GFIELD(cmd_rsp, RSP4_NUM_FUNCS) == 0) {
+ sd_err(("%s: Card does not support I/O\n", __FUNCTION__));
+ return ERROR;
+ }
+ sd->num_funcs = GFIELD(cmd_rsp, RSP4_NUM_FUNCS);
+
+ /* Examine voltage: Arasan only supports 3.3 volts,
+ * so look for 3.2-3.3 Volts and also 3.3-3.4 volts.
+ */
+
+ if ((GFIELD(cmd_rsp, RSP4_IO_OCR) & (0x3 << 20)) == 0) {
+ sd_err(("This client does not support 3.3 volts!\n"));
+ return ERROR;
+ }
+ sd_info(("Leaving bus power at 3.3 Volts\n"));
+
+ cmd_arg = SFIELD(0, CMD5_OCR, 0xfff000);
+ cmd_rsp = 0;
+ get_ocr(sd, &cmd_arg, &cmd_rsp);
+ sd_info(("OCR = 0x%x\n", GFIELD(cmd_rsp, RSP4_IO_OCR)));
+ return TRUE;
+}
+
+bool
+sdstd_bus_width(sdioh_info_t *sd, int new_mode)
+{
+ uint32 regdata;
+ int status;
+ uint8 reg8;
+
+ sd_trace(("%s\n", __FUNCTION__));
+ if (sd->sd_mode == new_mode) {
+ sd_info(("%s: Already at width %d\n", __FUNCTION__, new_mode));
+ /* Could exit, but continue just in case... */
+ }
+
+ /* Set client side via reg 0x7 in CCCR */
+ if ((status = sdstd_card_regread (sd, 0, SDIOD_CCCR_BICTRL, 1, ®data)) != SUCCESS)
+ return (bool)status;
+ regdata &= ~BUS_SD_DATA_WIDTH_MASK;
+ if (new_mode == SDIOH_MODE_SD4) {
+ sd_info(("Changing to SD4 Mode\n"));
+ regdata |= SD4_MODE;
+ } else if (new_mode == SDIOH_MODE_SD1) {
+ sd_info(("Changing to SD1 Mode\n"));
+ } else {
+ sd_err(("SPI Mode not supported by Standard Host Controller\n"));
+ }
+
+ if ((status = sdstd_card_regwrite (sd, 0, SDIOD_CCCR_BICTRL, 1, regdata)) != SUCCESS)
+ return (bool)status;
+
+ /* Set host side via Host reg */
+ reg8 = sdstd_rreg8(sd, SD_HostCntrl) & ~SD4_MODE;
+ if (new_mode == SDIOH_MODE_SD4)
+ reg8 |= SD4_MODE;
+ sdstd_wreg8(sd, SD_HostCntrl, reg8);
+
+ sd->sd_mode = new_mode;
+
+ return TRUE;
+}
+
+static int
+sdstd_driver_init(sdioh_info_t *sd)
+{
+ sd_trace(("%s\n", __FUNCTION__));
+ if ((sdstd_host_init(sd)) != SUCCESS) {
+ return ERROR;
+ }
+
+ if (sdstd_client_init(sd) != SUCCESS) {
+ return ERROR;
+ }
+
+ return SUCCESS;
+}
+
+static int
+sdstd_get_cisaddr(sdioh_info_t *sd, uint32 regaddr)
+{
+ /* read 24 bits and return valid 17 bit addr */
+ int i;
+ uint32 scratch, regdata;
+ uint8 *ptr = (uint8 *)&scratch;
+ for (i = 0; i < 3; i++) {
+ if ((sdstd_card_regread (sd, 0, regaddr, 1, ®data)) != SUCCESS)
+ sd_err(("%s: Can't read!\n", __FUNCTION__));
+
+ *ptr++ = (uint8) regdata;
+ regaddr++;
+ }
+ /* Only the lower 17-bits are valid */
+ scratch = ltoh32(scratch);
+ scratch &= 0x0001FFFF;
+ return (scratch);
+}
+
+static int
+sdstd_card_enablefuncs(sdioh_info_t *sd)
+{
+ int status;
+ uint32 regdata;
+ uint32 fbraddr;
+ uint8 func;
+
+ sd_trace(("%s\n", __FUNCTION__));
+
+ /* Get the Card's common CIS address */
+ sd->com_cis_ptr = sdstd_get_cisaddr(sd, SDIOD_CCCR_CISPTR_0);
+ sd->func_cis_ptr[0] = sd->com_cis_ptr;
+ sd_info(("%s: Card's Common CIS Ptr = 0x%x\n", __FUNCTION__, sd->com_cis_ptr));
+
+ /* Get the Card's function CIS (for each function) */
+ for (fbraddr = SDIOD_FBR_STARTADDR, func = 1;
+ func <= sd->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) {
+ sd->func_cis_ptr[func] = sdstd_get_cisaddr(sd, SDIOD_FBR_CISPTR_0 + fbraddr);
+ sd_info(("%s: Function %d CIS Ptr = 0x%x\n",
+ __FUNCTION__, func, sd->func_cis_ptr[func]));
+ }
+
+ /* Enable function 1 on the card */
+ regdata = SDIO_FUNC_ENABLE_1;
+ if ((status = sdstd_card_regwrite(sd, 0, SDIOD_CCCR_IOEN, 1, regdata)) != SUCCESS)
+ return status;
+
+ return SUCCESS;
+}
+
+/* Read client card reg */
+static int
+sdstd_card_regread(sdioh_info_t *sd, int func, uint32 regaddr, int regsize, uint32 *data)
+{
+ int status;
+ uint32 cmd_arg;
+ uint32 rsp5;
+
+
+ cmd_arg = 0;
+
+ if ((func == 0) || (regsize == 1)) {
+ cmd_arg = SFIELD(cmd_arg, CMD52_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD52_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RW_FLAG, SDIOH_XFER_TYPE_READ);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RAW, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD52_DATA, 0);
+
+ if ((status = sdstd_cmd_issue(sd, USE_DMA(sd), SDIOH_CMD_52, cmd_arg))
+ != SUCCESS)
+ return status;
+
+ sdstd_cmd_getrsp(sd, &rsp5, 1);
+ if (sdstd_rreg16(sd, SD_ErrorIntrStatus) != 0) {
+ sd_err(("%s: 1: ErrorintrStatus 0x%x\n",
+ __FUNCTION__, sdstd_rreg16(sd, SD_ErrorIntrStatus)));
+ }
+
+ if (GFIELD(rsp5, RSP5_FLAGS) != 0x10)
+ sd_err(("%s: rsp5 flags is 0x%x\t %d\n",
+ __FUNCTION__, GFIELD(rsp5, RSP5_FLAGS), func));
+
+ if (GFIELD(rsp5, RSP5_STUFF))
+ sd_err(("%s: rsp5 stuff is 0x%x: should be 0\n",
+ __FUNCTION__, GFIELD(rsp5, RSP5_STUFF)));
+ *data = GFIELD(rsp5, RSP5_DATA);
+ } else {
+ cmd_arg = SFIELD(cmd_arg, CMD53_BYTE_BLK_CNT, regsize);
+ cmd_arg = SFIELD(cmd_arg, CMD53_OP_CODE, 1);
+ cmd_arg = SFIELD(cmd_arg, CMD53_BLK_MODE, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD53_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD53_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, CMD53_RW_FLAG, SDIOH_XFER_TYPE_READ);
+
+ sd->data_xfer_count = regsize;
+
+ /* sdstd_cmd_issue() returns with the command complete bit
+ * in the ISR already cleared
+ */
+ if ((status = sdstd_cmd_issue(sd, USE_DMA(sd), SDIOH_CMD_53, cmd_arg))
+ != SUCCESS)
+ return status;
+
+ sdstd_cmd_getrsp(sd, &rsp5, 1);
+
+ if (GFIELD(rsp5, RSP5_FLAGS) != 0x10)
+ sd_err(("%s: rsp5 flags is 0x%x\t %d\n",
+ __FUNCTION__, GFIELD(rsp5, RSP5_FLAGS), func));
+
+ if (GFIELD(rsp5, RSP5_STUFF))
+ sd_err(("%s: rsp5 stuff is 0x%x: should be 0\n",
+ __FUNCTION__, GFIELD(rsp5, RSP5_STUFF)));
+
+ if (sd->polled_mode) {
+ volatile uint16 int_reg;
+ int retries = RETRIES_LARGE;
+
+ /* Wait for Read Buffer to become ready */
+ do {
+ int_reg = sdstd_rreg16(sd, SD_IntrStatus);
+ } while (--retries && (GFIELD(int_reg, INTSTAT_BUF_READ_READY) == 0));
+
+ if (!retries) {
+ sd_err(("%s: Timeout on Buf_Read_Ready: "
+ "intStat: 0x%x errint: 0x%x PresentState 0x%x\n",
+ __FUNCTION__, int_reg,
+ sdstd_rreg16(sd, SD_ErrorIntrStatus),
+ sdstd_rreg(sd, SD_PresentState)));
+ sdstd_check_errs(sd, SDIOH_CMD_53, cmd_arg);
+ return (ERROR);
+ }
+
+ /* Have Buffer Ready, so clear it and read the data */
+ sdstd_wreg16(sd, SD_IntrStatus, SFIELD(0, INTSTAT_BUF_READ_READY, 1));
+ if (regsize == 2)
+ *data = sdstd_rreg16(sd, SD_BufferDataPort0);
+ else
+ *data = sdstd_rreg(sd, SD_BufferDataPort0);
+
+ /* Check Status.
+ * After the data is read, the Transfer Complete bit should be on
+ */
+ retries = RETRIES_LARGE;
+ do {
+ int_reg = sdstd_rreg16(sd, SD_IntrStatus);
+ } while (--retries && (GFIELD(int_reg, INTSTAT_XFER_COMPLETE) == 0));
+
+ /* Check for any errors from the data phase */
+ if (sdstd_check_errs(sd, SDIOH_CMD_53, cmd_arg))
+ return ERROR;
+
+ if (!retries) {
+ sd_err(("%s: Timeout on xfer complete: "
+ "intr 0x%04x err 0x%04x state 0x%08x\n",
+ __FUNCTION__, int_reg,
+ sdstd_rreg16(sd, SD_ErrorIntrStatus),
+ sdstd_rreg(sd, SD_PresentState)));
+ return (ERROR);
+ }
+
+ sdstd_wreg16(sd, SD_IntrStatus, SFIELD(0, INTSTAT_XFER_COMPLETE, 1));
+ }
+ }
+ if (sd->polled_mode) {
+ if (regsize == 2)
+ *data &= 0xffff;
+ }
+ return SUCCESS;
+}
+
+bool
+check_client_intr(sdioh_info_t *sd)
+{
+ uint16 raw_int, cur_int, old_int;
+
+ raw_int = sdstd_rreg16(sd, SD_IntrStatus);
+ cur_int = raw_int & sd->intmask;
+
+ if (!cur_int) {
+ /* Not an error -- might share interrupts... */
+ return FALSE;
+ }
+
+ if (GFIELD(cur_int, INTSTAT_CARD_INT)) {
+ old_int = sdstd_rreg16(sd, SD_IntrStatusEnable);
+ sdstd_wreg16(sd, SD_IntrStatusEnable, SFIELD(old_int, INTSTAT_CARD_INT, 0));
+
+ if (sd->client_intr_enabled && sd->use_client_ints) {
+ sd->intrcount++;
+ ASSERT(sd->intr_handler);
+ ASSERT(sd->intr_handler_arg);
+ (sd->intr_handler)(sd->intr_handler_arg);
+ } else {
+ sd_err(("%s: Not ready for intr: enabled %d, handler %p\n",
+ __FUNCTION__, sd->client_intr_enabled, sd->intr_handler));
+ }
+ sdstd_wreg16(sd, SD_IntrStatusEnable, old_int);
+ } else {
+ /* Local interrupt: disable, set flag, and save intrstatus */
+ sdstd_wreg16(sd, SD_IntrSignalEnable, 0);
+ sdstd_wreg16(sd, SD_ErrorIntrSignalEnable, 0);
+ sd->local_intrcount++;
+ sd->got_hcint = TRUE;
+ sd->last_intrstatus = cur_int;
+ }
+
+ return TRUE;
+}
+
+void
+sdstd_spinbits(sdioh_info_t *sd, uint16 norm, uint16 err)
+{
+ uint16 int_reg, err_reg;
+ int retries = RETRIES_LARGE;
+
+ do {
+ int_reg = sdstd_rreg16(sd, SD_IntrStatus);
+ err_reg = sdstd_rreg16(sd, SD_ErrorIntrStatus);
+ } while (--retries && !(int_reg & norm) && !(err_reg & err));
+
+ norm |= sd->intmask;
+ if (err_reg & err)
+ norm = SFIELD(norm, INTSTAT_ERROR_INT, 1);
+ sd->last_intrstatus = int_reg & norm;
+}
+
+/* write a client register */
+static int
+sdstd_card_regwrite(sdioh_info_t *sd, int func, uint32 regaddr, int regsize, uint32 data)
+{
+ int status;
+ uint32 cmd_arg, rsp5, flags;
+
+ cmd_arg = 0;
+
+ if ((func == 0) || (regsize == 1)) {
+ cmd_arg = SFIELD(cmd_arg, CMD52_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD52_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RW_FLAG, SDIOH_XFER_TYPE_WRITE);
+ cmd_arg = SFIELD(cmd_arg, CMD52_RAW, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD52_DATA, data & 0xff);
+ if ((status = sdstd_cmd_issue(sd, USE_DMA(sd), SDIOH_CMD_52, cmd_arg))
+ != SUCCESS)
+ return status;
+
+ sdstd_cmd_getrsp(sd, &rsp5, 1);
+ flags = GFIELD(rsp5, RSP5_FLAGS);
+ if (flags && (flags != 0x10))
+ sd_err(("%s: rsp5.rsp5.flags = 0x%x, expecting 0x10\n",
+ __FUNCTION__, flags));
+ }
+ else {
+ cmd_arg = SFIELD(cmd_arg, CMD53_BYTE_BLK_CNT, regsize);
+ cmd_arg = SFIELD(cmd_arg, CMD53_OP_CODE, 1);
+ cmd_arg = SFIELD(cmd_arg, CMD53_BLK_MODE, 0);
+ cmd_arg = SFIELD(cmd_arg, CMD53_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD53_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, CMD53_RW_FLAG, SDIOH_XFER_TYPE_WRITE);
+
+ sd->data_xfer_count = regsize;
+
+ /* sdstd_cmd_issue() returns with the command complete bit
+ * in the ISR already cleared
+ */
+ if ((status = sdstd_cmd_issue(sd, USE_DMA(sd), SDIOH_CMD_53, cmd_arg))
+ != SUCCESS)
+ return status;
+
+ sdstd_cmd_getrsp(sd, &rsp5, 1);
+
+ if (GFIELD(rsp5, RSP5_FLAGS) != 0x10)
+ sd_err(("%s: rsp5 flags = 0x%x, expecting 0x10\n",
+ __FUNCTION__, GFIELD(rsp5, RSP5_FLAGS)));
+ if (GFIELD(rsp5, RSP5_STUFF))
+ sd_err(("%s: rsp5 stuff is 0x%x: expecting 0\n",
+ __FUNCTION__, GFIELD(rsp5, RSP5_STUFF)));
+
+ if (sd->polled_mode) {
+ uint16 int_reg;
+ int retries = RETRIES_LARGE;
+
+ /* Wait for Write Buffer to become ready */
+ do {
+ int_reg = sdstd_rreg16(sd, SD_IntrStatus);
+ } while (--retries && (GFIELD(int_reg, INTSTAT_BUF_WRITE_READY) == 0));
+
+ if (!retries) {
+ sd_err(("%s: Timeout on Buf_Write_Ready: intStat: 0x%x "
+ "errint: 0x%x PresentState 0x%x\n",
+ __FUNCTION__, int_reg,
+ sdstd_rreg16(sd, SD_ErrorIntrStatus),
+ sdstd_rreg(sd, SD_PresentState)));
+ sdstd_check_errs(sd, SDIOH_CMD_53, cmd_arg);
+ return (ERROR);
+ }
+ /* Clear Write Buf Ready bit */
+ int_reg = 0;
+ int_reg = SFIELD(int_reg, INTSTAT_BUF_WRITE_READY, 1);
+ sdstd_wreg16(sd, SD_IntrStatus, int_reg);
+
+ /* At this point we have Buffer Ready, so write the data */
+ if (regsize == 2)
+ sdstd_wreg16(sd, SD_BufferDataPort0, (uint16) data);
+ else
+ sdstd_wreg(sd, SD_BufferDataPort0, data);
+
+ /* Wait for Transfer Complete */
+ retries = RETRIES_LARGE;
+ do {
+ int_reg = sdstd_rreg16(sd, SD_IntrStatus);
+ } while (--retries && (GFIELD(int_reg, INTSTAT_XFER_COMPLETE) == 0));
+
+ /* Check for any errors from the data phase */
+ if (sdstd_check_errs(sd, SDIOH_CMD_53, cmd_arg))
+ return ERROR;
+
+ if (retries == 0) {
+ sd_err(("%s: Timeout for xfer complete; State = 0x%x, "
+ "intr state=0x%x, Errintstatus 0x%x rcnt %d, tcnt %d\n",
+ __FUNCTION__, sdstd_rreg(sd, SD_PresentState),
+ int_reg, sdstd_rreg16(sd, SD_ErrorIntrStatus),
+ sd->r_cnt, sd->t_cnt));
+ }
+ /* Clear the status bits */
+ sdstd_wreg16(sd, SD_IntrStatus, SFIELD(int_reg, INTSTAT_CARD_INT, 0));
+ }
+ }
+ return SUCCESS;
+}
+
+void
+sdstd_cmd_getrsp(sdioh_info_t *sd, uint32 *rsp_buffer, int count /* num 32 bit words */)
+{
+ int rsp_count;
+ int respaddr = SD_Response0;
+
+ if (count > 4)
+ count = 4;
+
+ for (rsp_count = 0; rsp_count < count; rsp_count++) {
+ *rsp_buffer++ = sdstd_rreg(sd, respaddr);
+ respaddr += 4;
+ }
+}
+
+static int
+sdstd_cmd_issue(sdioh_info_t *sdioh_info, bool use_dma, uint32 cmd, uint32 arg)
+{
+ uint16 cmd_reg;
+ int retries;
+ uint32 cmd_arg;
+ uint16 xfer_reg = 0;
+
+
+ if ((sdioh_info->sd_mode == SDIOH_MODE_SPI) &&
+ ((cmd == SDIOH_CMD_3) || (cmd == SDIOH_CMD_7) || (cmd == SDIOH_CMD_15))) {
+ sd_err(("%s: Cmd %d is not for SPI\n", __FUNCTION__, cmd));
+ return ERROR;
+ }
+
+ retries = RETRIES_SMALL;
+ while ((GFIELD(sdstd_rreg(sdioh_info, SD_PresentState), PRES_CMD_INHIBIT)) && --retries) {
+ if (retries == RETRIES_SMALL)
+ sd_err(("%s: Waiting for Command Inhibit cmd = %d 0x%x\n",
+ __FUNCTION__, cmd, sdstd_rreg(sdioh_info, SD_PresentState)));
+ }
+ if (!retries) {
+ sd_err(("%s: Command Inhibit timeout\n", __FUNCTION__));
+ if (trap_errs)
+ ASSERT(0);
+ return ERROR;
+ }
+
+
+ cmd_reg = 0;
+ switch (cmd) {
+ case SDIOH_CMD_0: /* Set Card to Idle State - No Response */
+ sd_data(("%s: CMD%d\n", __FUNCTION__, cmd));
+ cmd_reg = SFIELD(cmd_reg, CMD_RESP_TYPE, RESP_TYPE_NONE);
+ cmd_reg = SFIELD(cmd_reg, CMD_CRC_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_DATA_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_TYPE, CMD_TYPE_NORMAL);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX, cmd);
+ break;
+
+ case SDIOH_CMD_3: /* Ask card to send RCA - Response R6 */
+ sd_data(("%s: CMD%d\n", __FUNCTION__, cmd));
+ cmd_reg = SFIELD(cmd_reg, CMD_RESP_TYPE, RESP_TYPE_48);
+ cmd_reg = SFIELD(cmd_reg, CMD_CRC_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_DATA_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_TYPE, CMD_TYPE_NORMAL);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX, cmd);
+ break;
+
+ case SDIOH_CMD_5: /* Send Operation condition - Response R4 */
+ sd_data(("%s: CMD%d\n", __FUNCTION__, cmd));
+ cmd_reg = SFIELD(cmd_reg, CMD_RESP_TYPE, RESP_TYPE_48);
+ cmd_reg = SFIELD(cmd_reg, CMD_CRC_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_DATA_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_TYPE, CMD_TYPE_NORMAL);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX, cmd);
+ break;
+
+ case SDIOH_CMD_7: /* Select card - Response R1 */
+ sd_data(("%s: CMD%d\n", __FUNCTION__, cmd));
+ cmd_reg = SFIELD(cmd_reg, CMD_RESP_TYPE, RESP_TYPE_48);
+ cmd_reg = SFIELD(cmd_reg, CMD_CRC_EN, 1);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX_EN, 1);
+ cmd_reg = SFIELD(cmd_reg, CMD_DATA_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_TYPE, CMD_TYPE_NORMAL);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX, cmd);
+ break;
+
+ case SDIOH_CMD_15: /* Set card to inactive state - Response None */
+ sd_data(("%s: CMD%d\n", __FUNCTION__, cmd));
+ cmd_reg = SFIELD(cmd_reg, CMD_RESP_TYPE, RESP_TYPE_NONE);
+ cmd_reg = SFIELD(cmd_reg, CMD_CRC_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_DATA_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_TYPE, CMD_TYPE_NORMAL);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX, cmd);
+ break;
+
+ case SDIOH_CMD_52: /* IO R/W Direct (single byte) - Response R5 */
+
+ sd_data(("%s: CMD52 func(%d) addr(0x%x) %s data(0x%x)\n",
+ __FUNCTION__,
+ GFIELD(arg, CMD52_FUNCTION),
+ GFIELD(arg, CMD52_REG_ADDR),
+ GFIELD(arg, CMD52_RW_FLAG) ? "W" : "R",
+ GFIELD(arg, CMD52_DATA)));
+
+ cmd_reg = SFIELD(cmd_reg, CMD_RESP_TYPE, RESP_TYPE_48);
+ cmd_reg = SFIELD(cmd_reg, CMD_CRC_EN, 1);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX_EN, 1);
+ cmd_reg = SFIELD(cmd_reg, CMD_DATA_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_TYPE, CMD_TYPE_NORMAL);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX, cmd);
+ break;
+
+ case SDIOH_CMD_53: /* IO R/W Extended (multiple bytes/blocks) */
+
+ sd_data(("%s: CMD53 func(%d) addr(0x%x) %s mode(%s) cnt(%d), %s\n",
+ __FUNCTION__,
+ GFIELD(arg, CMD53_FUNCTION),
+ GFIELD(arg, CMD53_REG_ADDR),
+ GFIELD(arg, CMD53_RW_FLAG) ? "W" : "R",
+ GFIELD(arg, CMD53_BLK_MODE) ? "Block" : "Byte",
+ GFIELD(arg, CMD53_BYTE_BLK_CNT),
+ GFIELD(arg, CMD53_OP_CODE) ? "Incrementing addr" : "Single addr"));
+
+ cmd_arg = arg;
+ xfer_reg = 0;
+
+ cmd_reg = SFIELD(cmd_reg, CMD_RESP_TYPE, RESP_TYPE_48);
+ cmd_reg = SFIELD(cmd_reg, CMD_CRC_EN, 1);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX_EN, 1);
+ cmd_reg = SFIELD(cmd_reg, CMD_DATA_EN, 1);
+ cmd_reg = SFIELD(cmd_reg, CMD_TYPE, CMD_TYPE_NORMAL);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX, cmd);
+
+ use_dma = USE_DMA(sdioh_info) && GFIELD(cmd_arg, CMD53_BLK_MODE);
+
+ if (GFIELD(cmd_arg, CMD53_BLK_MODE)) {
+ uint16 blocksize;
+ uint16 blockcount;
+ int func;
+
+ ASSERT(sdioh_info->sd_blockmode);
+
+ func = GFIELD(cmd_arg, CMD53_FUNCTION);
+ blocksize = MIN((int)sdioh_info->data_xfer_count,
+ sdioh_info->client_block_size[func]);
+ blockcount = GFIELD(cmd_arg, CMD53_BYTE_BLK_CNT);
+
+ /* data_xfer_cnt is already setup so that for multiblock mode,
+ * it is the entire buffer length. For non-block or single block,
+ * it is < 64 bytes
+ */
+ if (use_dma) {
+ switch (sdioh_info->sd_dma_mode) {
+ case DMA_MODE_SDMA:
+ sd_dma(("%s: SDMA: SysAddr reg was 0x%x now 0x%x\n",
+ __FUNCTION__, sdstd_rreg(sdioh_info, SD_SysAddr),
+ (uint32)sdioh_info->dma_phys));
+ sdstd_wreg(sdioh_info, SD_SysAddr, sdioh_info->dma_phys);
+ break;
+ case DMA_MODE_ADMA1:
+ case DMA_MODE_ADMA2:
+ sd_dma(("%s: ADMA: Using ADMA\n", __FUNCTION__));
+ sd_create_adma_descriptor(sdioh_info, 0,
+ sdioh_info->dma_phys, blockcount*blocksize,
+ ADMA2_ATTRIBUTE_VALID | ADMA2_ATTRIBUTE_END |
+ ADMA2_ATTRIBUTE_INT | ADMA2_ATTRIBUTE_ACT_TRAN);
+ /* Dump descriptor if DMA debugging is enabled. */
+ if (sd_msglevel & SDH_DMA_VAL) {
+ sd_dump_adma_dscr(sdioh_info);
+ }
+
+ sdstd_wreg(sdioh_info, SD_ADMA_SysAddr,
+ sdioh_info->adma2_dscr_phys);
+ break;
+ default:
+ sd_err(("%s: unsupported DMA mode %d.\n",
+ __FUNCTION__, sdioh_info->sd_dma_mode));
+ break;
+ }
+ }
+
+ sd_trace(("%s: Setting block count %d, block size %d bytes\n",
+ __FUNCTION__, blockcount, blocksize));
+ sdstd_wreg16(sdioh_info, SD_BlockSize, blocksize);
+ sdstd_wreg16(sdioh_info, SD_BlockCount, blockcount);
+
+ xfer_reg = SFIELD(xfer_reg, XFER_DMA_ENABLE, use_dma);
+
+ if (sdioh_info->client_block_size[func] != blocksize)
+ set_client_block_size(sdioh_info, 1, blocksize);
+
+ if (blockcount > 1) {
+ xfer_reg = SFIELD(xfer_reg, XFER_MULTI_BLOCK, 1);
+ xfer_reg = SFIELD(xfer_reg, XFER_BLK_COUNT_EN, 1);
+ xfer_reg = SFIELD(xfer_reg, XFER_CMD_12_EN, 0);
+ } else {
+ xfer_reg = SFIELD(xfer_reg, XFER_MULTI_BLOCK, 0);
+ xfer_reg = SFIELD(xfer_reg, XFER_BLK_COUNT_EN, 0);
+ xfer_reg = SFIELD(xfer_reg, XFER_CMD_12_EN, 0);
+ }
+
+ if (GFIELD(cmd_arg, CMD53_RW_FLAG) == SDIOH_XFER_TYPE_READ)
+ xfer_reg = SFIELD(xfer_reg, XFER_DATA_DIRECTION, 1);
+ else
+ xfer_reg = SFIELD(xfer_reg, XFER_DATA_DIRECTION, 0);
+
+ retries = RETRIES_SMALL;
+ while (GFIELD(sdstd_rreg(sdioh_info, SD_PresentState),
+ PRES_DAT_INHIBIT) && --retries)
+ sd_err(("%s: Waiting for Data Inhibit cmd = %d\n",
+ __FUNCTION__, cmd));
+ if (!retries) {
+ sd_err(("%s: Data Inhibit timeout\n", __FUNCTION__));
+ if (trap_errs)
+ ASSERT(0);
+ return ERROR;
+ }
+ sdstd_wreg16(sdioh_info, SD_TransferMode, xfer_reg);
+
+ } else { /* Non block mode */
+ uint16 bytes = GFIELD(cmd_arg, CMD53_BYTE_BLK_CNT);
+ /* The byte/block count field only has 9 bits,
+ * so, to do a 512-byte bytemode transfer, this
+ * field will contain 0, but we need to tell the
+ * controller we're transferring 512 bytes.
+ */
+ if (bytes == 0) bytes = 512;
+
+ if (use_dma)
+ sdstd_wreg(sdioh_info, SD_SysAddr, sdioh_info->dma_phys);
+
+ /* PCI: Transfer Mode register 0x0c */
+ xfer_reg = SFIELD(xfer_reg, XFER_DMA_ENABLE, bytes <= 4 ? 0 : use_dma);
+ xfer_reg = SFIELD(xfer_reg, XFER_CMD_12_EN, 0);
+ if (GFIELD(cmd_arg, CMD53_RW_FLAG) == SDIOH_XFER_TYPE_READ)
+ xfer_reg = SFIELD(xfer_reg, XFER_DATA_DIRECTION, 1);
+ else
+ xfer_reg = SFIELD(xfer_reg, XFER_DATA_DIRECTION, 0);
+ /* See table 2-8 Host Controller spec ver 1.00 */
+ xfer_reg = SFIELD(xfer_reg, XFER_BLK_COUNT_EN, 0); /* Dont care */
+ xfer_reg = SFIELD(xfer_reg, XFER_MULTI_BLOCK, 0);
+
+ sdstd_wreg16(sdioh_info, SD_BlockSize, bytes);
+
+ sdstd_wreg16(sdioh_info, SD_BlockCount, 1);
+
+ retries = RETRIES_SMALL;
+ while (GFIELD(sdstd_rreg(sdioh_info, SD_PresentState),
+ PRES_DAT_INHIBIT) && --retries)
+ sd_err(("%s: Waiting for Data Inhibit cmd = %d\n",
+ __FUNCTION__, cmd));
+ if (!retries) {
+ sd_err(("%s: Data Inhibit timeout\n", __FUNCTION__));
+ if (trap_errs)
+ ASSERT(0);
+ return ERROR;
+ }
+ sdstd_wreg16(sdioh_info, SD_TransferMode, xfer_reg);
+ }
+ break;
+
+ default:
+ sd_err(("%s: Unknown command\n", __FUNCTION__));
+ return ERROR;
+ }
+
+ if (sdioh_info->sd_mode == SDIOH_MODE_SPI) {
+ cmd_reg = SFIELD(cmd_reg, CMD_CRC_EN, 0);
+ cmd_reg = SFIELD(cmd_reg, CMD_INDEX_EN, 0);
+ }
+
+ /* Setup and issue the SDIO command */
+ sdstd_wreg(sdioh_info, SD_Arg0, arg);
+ sdstd_wreg16(sdioh_info, SD_Command, cmd_reg);
+
+ /* If we are in polled mode, wait for the command to complete.
+ * In interrupt mode, return immediately. The calling function will
+ * know that the command has completed when the CMDATDONE interrupt
+ * is asserted
+ */
+ if (sdioh_info->polled_mode) {
+ uint16 int_reg = 0;
+ int retries = RETRIES_LARGE;
+
+ do {
+ int_reg = sdstd_rreg16(sdioh_info, SD_IntrStatus);
+ } while (--retries &&
+ (GFIELD(int_reg, INTSTAT_ERROR_INT) == 0) &&
+ (GFIELD(int_reg, INTSTAT_CMD_COMPLETE) == 0));
+
+ if (!retries) {
+ sd_err(("%s: CMD_COMPLETE timeout: intrStatus: 0x%x "
+ "error stat 0x%x state 0x%x\n",
+ __FUNCTION__, int_reg,
+ sdstd_rreg16(sdioh_info, SD_ErrorIntrStatus),
+ sdstd_rreg(sdioh_info, SD_PresentState)));
+
+ /* Attempt to reset CMD line when we get a CMD timeout */
+ sdstd_wreg8(sdioh_info, SD_SoftwareReset, SFIELD(0, SW_RESET_CMD, 1));
+ retries = RETRIES_LARGE;
+ do {
+ sd_trace(("%s: waiting for CMD line reset\n", __FUNCTION__));
+ } while ((GFIELD(sdstd_rreg8(sdioh_info, SD_SoftwareReset),
+ SW_RESET_CMD)) && retries--);
+
+ if (!retries) {
+ sd_err(("%s: Timeout waiting for CMD line reset\n", __FUNCTION__));
+ }
+
+ if (trap_errs)
+ ASSERT(0);
+ return (ERROR);
+ }
+
+ /* Clear Command Complete interrupt */
+ int_reg = SFIELD(0, INTSTAT_CMD_COMPLETE, 1);
+ sdstd_wreg16(sdioh_info, SD_IntrStatus, int_reg);
+
+ /* Check for Errors */
+ if (sdstd_check_errs(sdioh_info, cmd, arg)) {
+ if (trap_errs)
+ ASSERT(0);
+ return ERROR;
+ }
+ }
+ return SUCCESS;
+}
+
+
+static int
+sdstd_card_buf(sdioh_info_t *sd, int rw, int func, bool fifo, uint32 addr, int nbytes, uint32 *data)
+{
+ int status;
+ uint32 cmd_arg;
+ uint32 rsp5;
+ uint16 int_reg, int_bit;
+ uint flags;
+ int num_blocks, blocksize;
+ bool local_blockmode, local_dma;
+ bool read = rw == SDIOH_READ ? 1 : 0;
+ bool yield = FALSE;
+
+ ASSERT(nbytes);
+
+ cmd_arg = 0;
+
+ sd_data(("%s: %s 53 addr 0x%x, len %d bytes, r_cnt %d t_cnt %d\n",
+ __FUNCTION__, read ? "Rd" : "Wr", addr, nbytes, sd->r_cnt, sd->t_cnt));
+
+ if (read) sd->r_cnt++; else sd->t_cnt++;
+
+ local_blockmode = sd->sd_blockmode;
+ local_dma = USE_DMA(sd);
+
+ /* Don't bother with block mode on small xfers */
+ if (nbytes < sd->client_block_size[func]) {
+ sd_data(("setting local blockmode to false: nbytes (%d) != block_size (%d)\n",
+ nbytes, sd->client_block_size[func]));
+ local_blockmode = FALSE;
+ local_dma = FALSE;
+ }
+
+ if (local_blockmode) {
+ blocksize = MIN(sd->client_block_size[func], nbytes);
+ num_blocks = nbytes/blocksize;
+ cmd_arg = SFIELD(cmd_arg, CMD53_BYTE_BLK_CNT, num_blocks);
+ cmd_arg = SFIELD(cmd_arg, CMD53_BLK_MODE, 1);
+ } else {
+ num_blocks = 1;
+ blocksize = nbytes;
+ cmd_arg = SFIELD(cmd_arg, CMD53_BYTE_BLK_CNT, nbytes);
+ cmd_arg = SFIELD(cmd_arg, CMD53_BLK_MODE, 0);
+ }
+
+ if (local_dma && !read) {
+ bcopy(data, sd->dma_buf, nbytes);
+ sd_sync_dma(sd, read, nbytes);
+ }
+
+ if (fifo)
+ cmd_arg = SFIELD(cmd_arg, CMD53_OP_CODE, 0);
+ else
+ cmd_arg = SFIELD(cmd_arg, CMD53_OP_CODE, 1);
+
+ cmd_arg = SFIELD(cmd_arg, CMD53_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, CMD53_REG_ADDR, addr);
+ if (read)
+ cmd_arg = SFIELD(cmd_arg, CMD53_RW_FLAG, SDIOH_XFER_TYPE_READ);
+ else
+ cmd_arg = SFIELD(cmd_arg, CMD53_RW_FLAG, SDIOH_XFER_TYPE_WRITE);
+
+ sd->data_xfer_count = nbytes;
+
+ /* sdstd_cmd_issue() returns with the command complete bit
+ * in the ISR already cleared
+ */
+ if ((status = sdstd_cmd_issue(sd, local_dma, SDIOH_CMD_53, cmd_arg)) != SUCCESS) {
+ sd_err(("%s: cmd_issue failed for %s\n", __FUNCTION__, (read ? "read" : "write")));
+ return status;
+ }
+
+ sdstd_cmd_getrsp(sd, &rsp5, 1);
+
+ if ((flags = GFIELD(rsp5, RSP5_FLAGS)) != 0x10) {
+ sd_err(("%s: Rsp5: nbytes %d, dma %d blockmode %d, read %d "
+ "numblocks %d, blocksize %d\n",
+ __FUNCTION__, nbytes, local_dma, local_dma, read, num_blocks, blocksize));
+
+ if (flags & 1)
+ sd_err(("%s: rsp5: Command not accepted: arg out of range 0x%x, "
+ "bytes %d dma %d\n",
+ __FUNCTION__, flags, GFIELD(cmd_arg, CMD53_BYTE_BLK_CNT),
+ GFIELD(cmd_arg, CMD53_BLK_MODE)));
+ if (flags & 0x8)
+ sd_err(("%s: Rsp5: General Error\n", __FUNCTION__));
+
+ sd_err(("%s: rsp5 flags = 0x%x, expecting 0x10 returning error\n",
+ __FUNCTION__, flags));
+ if (trap_errs)
+ ASSERT(0);
+ return ERROR;
+ }
+
+ if (GFIELD(rsp5, RSP5_STUFF))
+ sd_err(("%s: rsp5 stuff is 0x%x: expecting 0\n",
+ __FUNCTION__, GFIELD(rsp5, RSP5_STUFF)));
+
+#ifdef BCMSDYIELD
+ yield = sd_yieldcpu && ((uint)nbytes >= sd_minyield);
+#endif
+
+ if (!local_dma) {
+ int bytes, i;
+ uint32 tmp;
+ for (i = 0; i < num_blocks; i++) {
+ int words;
+
+ /* Decide which status bit we're waiting for */
+ if (read)
+ int_bit = SFIELD(0, INTSTAT_BUF_READ_READY, 1);
+ else
+ int_bit = SFIELD(0, INTSTAT_BUF_WRITE_READY, 1);
+
+ /* If not on, wait for it (or for xfer error) */
+ int_reg = sdstd_rreg16(sd, SD_IntrStatus);
+ if (!(int_reg & int_bit))
+ int_reg = sdstd_waitbits(sd, int_bit, ERRINT_TRANSFER_ERRS, yield);
+
+ /* Confirm we got the bit w/o error */
+ if (!(int_reg & int_bit) || GFIELD(int_reg, INTSTAT_ERROR_INT)) {
+ sd_err(("%s: Error or timeout for Buf_%s_Ready: intStat: 0x%x "
+ "errint: 0x%x PresentState 0x%x\n",
+ __FUNCTION__, read ? "Read" : "Write", int_reg,
+ sdstd_rreg16(sd, SD_ErrorIntrStatus),
+ sdstd_rreg(sd, SD_PresentState)));
+ sdstd_dumpregs(sd);
+ sdstd_check_errs(sd, SDIOH_CMD_53, cmd_arg);
+ return (ERROR);
+ }
+
+ /* Clear Buf Ready bit */
+ sdstd_wreg16(sd, SD_IntrStatus, int_bit);
+
+ /* At this point we have Buffer Ready, write the data 4 bytes at a time */
+ for (words = blocksize/4; words; words--) {
+ if (read)
+ *data = sdstd_rreg(sd, SD_BufferDataPort0);
+ else
+ sdstd_wreg(sd, SD_BufferDataPort0, *data);
+ data++;
+ }
+
+ bytes = blocksize % 4;
+
+ /* If no leftover bytes, go to next block */
+ if (!bytes)
+ continue;
+
+ switch (bytes) {
+ case 1:
+ /* R/W 8 bits */
+ if (read)
+ *(data++) = (uint32)(sdstd_rreg8(sd, SD_BufferDataPort0));
+ else
+ sdstd_wreg8(sd, SD_BufferDataPort0,
+ (uint8)(*(data++) & 0xff));
+ break;
+ case 2:
+ /* R/W 16 bits */
+ if (read)
+ *(data++) = (uint32)sdstd_rreg16(sd, SD_BufferDataPort0);
+ else
+ sdstd_wreg16(sd, SD_BufferDataPort0, (uint16)(*(data++)));
+ break;
+ case 3:
+ /* R/W 24 bits:
+ * SD_BufferDataPort0[0-15] | SD_BufferDataPort1[16-23]
+ */
+ if (read) {
+ tmp = (uint32)sdstd_rreg16(sd, SD_BufferDataPort0);
+ tmp |= ((uint32)(sdstd_rreg8(sd,
+ SD_BufferDataPort1)) << 16);
+ *(data++) = tmp;
+ } else {
+ tmp = *(data++);
+ sdstd_wreg16(sd, SD_BufferDataPort0, (uint16)tmp & 0xffff);
+ sdstd_wreg8(sd, SD_BufferDataPort1,
+ (uint8)((tmp >> 16) & 0xff));
+ }
+ break;
+ default:
+ sd_err(("%s: Unexpected bytes leftover %d\n",
+ __FUNCTION__, bytes));
+ ASSERT(0);
+ break;
+ }
+ }
+ } /* End PIO processing */
+
+ /* Wait for Transfer Complete or Transfer Error */
+ int_bit = SFIELD(0, INTSTAT_XFER_COMPLETE, 1);
+
+ /* If not on, wait for it (or for xfer error) */
+ int_reg = sdstd_rreg16(sd, SD_IntrStatus);
+ if (!(int_reg & int_bit))
+ int_reg = sdstd_waitbits(sd, int_bit, ERRINT_TRANSFER_ERRS, yield);
+
+ /* Check for any errors from the data phase */
+ if (sdstd_check_errs(sd, SDIOH_CMD_53, cmd_arg))
+ return ERROR;
+
+ /* May have gotten a software timeout if not blocking? */
+ int_reg = sdstd_rreg16(sd, SD_IntrStatus);
+ if (!(int_reg & int_bit)) {
+ sd_err(("%s: Error or Timeout for xfer complete; %s, dma %d, State 0x%08x, "
+ "intr 0x%04x, Err 0x%04x, len = %d, rcnt %d, tcnt %d\n",
+ __FUNCTION__, read ? "R" : "W", local_dma,
+ sdstd_rreg(sd, SD_PresentState), int_reg,
+ sdstd_rreg16(sd, SD_ErrorIntrStatus), nbytes,
+ sd->r_cnt, sd->t_cnt));
+ sdstd_dumpregs(sd);
+ return ERROR;
+ }
+
+ /* Clear the status bits */
+ int_reg = int_bit;
+ if (local_dma) {
+ /* DMA Complete */
+ /* Reads in particular don't have DMA_COMPLETE set */
+ int_reg = SFIELD(int_reg, INTSTAT_DMA_INT, 1);
+ }
+ sdstd_wreg16(sd, SD_IntrStatus, int_reg);
+
+ /* Fetch data */
+ if (local_dma && read) {
+ sd_sync_dma(sd, read, nbytes);
+ bcopy(sd->dma_buf, data, nbytes);
+ }
+ return SUCCESS;
+}
+
+static int
+set_client_block_size(sdioh_info_t *sd, int func, int block_size)
+{
+ int base;
+ int err = 0;
+
+
+ sd_err(("%s: Setting block size %d, func %d\n", __FUNCTION__, block_size, func));
+ sd->client_block_size[func] = block_size;
+
+ /* Set the block size in the SDIO Card register */
+ base = func * SDIOD_FBR_SIZE;
+ err = sdstd_card_regwrite(sd, 0, base+SDIOD_CCCR_BLKSIZE_0, 1, block_size & 0xff);
+ if (!err) {
+ err = sdstd_card_regwrite(sd, 0, base+SDIOD_CCCR_BLKSIZE_1, 1,
+ (block_size >> 8) & 0xff);
+ }
+
+ /* Do not set the block size in the SDIO Host register, that
+ * is func dependent and will get done on an individual
+ * transaction basis
+ */
+
+ return (err ? BCME_SDIO_ERROR : 0);
+}
+
+/* Reset and re-initialize the device */
+int
+sdioh_sdio_reset(sdioh_info_t *si)
+{
+ uint8 hreg;
+
+ /* Reset the attached device (use slower clock for safety) */
+ sdstd_start_clock(si, 128);
+ sdstd_reset(si, 0, 1);
+
+ /* Reset portions of the host state accordingly */
+ hreg = sdstd_rreg8(si, SD_HostCntrl);
+ hreg = SFIELD(hreg, HOST_HI_SPEED_EN, 0);
+ hreg = SFIELD(hreg, HOST_DATA_WIDTH, 0);
+ si->sd_mode = SDIOH_MODE_SD1;
+
+ /* Reinitialize the card */
+ si->card_init_done = FALSE;
+ return sdstd_client_init(si);
+}
+
+
+static void
+sd_map_dma(sdioh_info_t * sd)
+{
+
+ void *va;
+
+ if ((va = DMA_ALLOC_CONSISTENT(sd->osh, SD_PAGE,
+ &sd->dma_start_phys, 0x12, 12)) == NULL) {
+ sd->sd_dma_mode = DMA_MODE_NONE;
+ sd->dma_start_buf = 0;
+ sd->dma_buf = (void *)0;
+ sd->dma_phys = 0;
+ sd->alloced_dma_size = SD_PAGE;
+ sd_err(("%s: DMA_ALLOC failed. Disabling DMA support.\n", __FUNCTION__));
+ } else {
+ sd->dma_start_buf = va;
+ sd->dma_buf = (void *)ROUNDUP((uintptr)va, SD_PAGE);
+ sd->dma_phys = ROUNDUP((sd->dma_start_phys), SD_PAGE);
+ sd->alloced_dma_size = SD_PAGE;
+ sd_err(("%s: Mapped DMA Buffer %dbytes @virt/phys: %p/0x%lx\n",
+ __FUNCTION__, sd->alloced_dma_size, sd->dma_buf, sd->dma_phys));
+ sd_fill_dma_data_buf(sd, 0xA5);
+ }
+
+ if ((va = DMA_ALLOC_CONSISTENT(sd->osh, SD_PAGE,
+ &sd->adma2_dscr_start_phys, 0x12, 12)) == NULL) {
+ sd->sd_dma_mode = DMA_MODE_NONE;
+ sd->adma2_dscr_start_buf = 0;
+ sd->adma2_dscr_buf = (void *)0;
+ sd->adma2_dscr_phys = 0;
+ sd->alloced_adma2_dscr_size = 0;
+ sd_err(("%s: DMA_ALLOC failed for descriptor buffer. "
+ "Disabling DMA support.\n", __FUNCTION__));
+ } else {
+ sd->adma2_dscr_start_buf = va;
+ sd->adma2_dscr_buf = (void *)ROUNDUP((uintptr)va, SD_PAGE);
+ sd->adma2_dscr_phys = ROUNDUP((sd->adma2_dscr_start_phys), SD_PAGE);
+ sd->alloced_adma2_dscr_size = SD_PAGE;
+ }
+
+ sd_err(("%s: Mapped ADMA2 Descriptor Buffer %dbytes @virt/phys: %p/0x%lx\n",
+ __FUNCTION__, sd->alloced_adma2_dscr_size, sd->adma2_dscr_buf,
+ sd->adma2_dscr_phys));
+ sd_clear_adma_dscr_buf(sd);
+}
+
+static void
+sd_unmap_dma(sdioh_info_t * sd)
+{
+ if (sd->dma_start_buf) {
+ DMA_FREE_CONSISTENT(sd->osh, sd->dma_start_buf, sd->alloced_dma_size,
+ sd->dma_start_phys, 0x12);
+ }
+
+ if (sd->adma2_dscr_start_buf) {
+ DMA_FREE_CONSISTENT(sd->osh, sd->adma2_dscr_start_buf, sd->alloced_adma2_dscr_size,
+ sd->adma2_dscr_start_phys, 0x12);
+ }
+}
+
+static void sd_clear_adma_dscr_buf(sdioh_info_t *sd)
+{
+ bzero((char *)sd->adma2_dscr_buf, SD_PAGE);
+ sd_dump_adma_dscr(sd);
+}
+
+static void sd_fill_dma_data_buf(sdioh_info_t *sd, uint8 data)
+{
+ memset((char *)sd->dma_buf, data, SD_PAGE);
+}
+
+
+static void sd_create_adma_descriptor(sdioh_info_t *sd, uint32 index,
+ uint32 addr_phys, uint16 length, uint16 flags)
+{
+ adma2_dscr_32b_t *adma2_dscr_table;
+ adma1_dscr_t *adma1_dscr_table;
+
+ adma2_dscr_table = sd->adma2_dscr_buf;
+ adma1_dscr_table = sd->adma2_dscr_buf;
+
+ switch (sd->sd_dma_mode) {
+ case DMA_MODE_ADMA2:
+ sd_dma(("%s: creating ADMA2 descriptor for index %d\n",
+ __FUNCTION__, index));
+
+ adma2_dscr_table[index].phys_addr = addr_phys;
+ adma2_dscr_table[index].len_attr = length << 16;
+ adma2_dscr_table[index].len_attr |= flags;
+ break;
+ case DMA_MODE_ADMA1:
+ /* ADMA1 requires two descriptors, one for len
+ * and the other for data transfer
+ */
+ index <<= 1;
+
+ sd_dma(("%s: creating ADMA1 descriptor for index %d\n",
+ __FUNCTION__, index));
+
+ adma1_dscr_table[index].phys_addr_attr = length << 12;
+ adma1_dscr_table[index].phys_addr_attr |= (ADMA1_ATTRIBUTE_ACT_SET |
+ ADMA2_ATTRIBUTE_VALID);
+ adma1_dscr_table[index+1].phys_addr_attr = addr_phys & 0xFFFFF000;
+ adma1_dscr_table[index+1].phys_addr_attr |= (flags & 0x3f);
+ break;
+ default:
+ sd_err(("%s: cannot create ADMA descriptor for DMA mode %d\n",
+ __FUNCTION__, sd->sd_dma_mode));
+ break;
+ }
+}
+
+
+static void sd_dump_adma_dscr(sdioh_info_t *sd)
+{
+ adma2_dscr_32b_t *adma2_dscr_table;
+ adma1_dscr_t *adma1_dscr_table;
+ uint32 i = 0;
+ uint16 flags;
+ char flags_str[32];
+
+ ASSERT(sd->adma2_dscr_buf != NULL);
+
+ adma2_dscr_table = sd->adma2_dscr_buf;
+ adma1_dscr_table = sd->adma2_dscr_buf;
+
+ switch (sd->sd_dma_mode) {
+ case DMA_MODE_ADMA2:
+ sd_err(("ADMA2 Descriptor Table (%dbytes) @virt/phys: %p/0x%lx\n",
+ SD_PAGE, sd->adma2_dscr_buf, sd->adma2_dscr_phys));
+ sd_err((" #[Descr VA ] Buffer PA | Len | Flags (5:4 2 1 0)"
+ " |\n"));
+ while (adma2_dscr_table->len_attr & ADMA2_ATTRIBUTE_VALID) {
+ flags = adma2_dscr_table->len_attr & 0xFFFF;
+ sprintf(flags_str, "%s%s%s%s",
+ ((flags & ADMA2_ATTRIBUTE_ACT_LINK) ==
+ ADMA2_ATTRIBUTE_ACT_LINK) ? "LINK " :
+ ((flags & ADMA2_ATTRIBUTE_ACT_LINK) ==
+ ADMA2_ATTRIBUTE_ACT_TRAN) ? "TRAN " :
+ ((flags & ADMA2_ATTRIBUTE_ACT_LINK) ==
+ ADMA2_ATTRIBUTE_ACT_NOP) ? "NOP " : "RSV ",
+ (flags & ADMA2_ATTRIBUTE_INT ? "INT " : " "),
+ (flags & ADMA2_ATTRIBUTE_END ? "END " : " "),
+ (flags & ADMA2_ATTRIBUTE_VALID ? "VALID" : ""));
+ sd_err(("%2d[0x%p]: 0x%08x | 0x%04x | 0x%04x (%s) |\n",
+ i, adma2_dscr_table, adma2_dscr_table->phys_addr,
+ adma2_dscr_table->len_attr >> 16, flags, flags_str));
+ i++;
+
+ /* Follow LINK descriptors or skip to next. */
+ if ((flags & ADMA2_ATTRIBUTE_ACT_LINK) ==
+ ADMA2_ATTRIBUTE_ACT_LINK) {
+ adma2_dscr_table = phys_to_virt(
+ adma2_dscr_table->phys_addr);
+ } else {
+ adma2_dscr_table++;
+ }
+
+ }
+ break;
+ case DMA_MODE_ADMA1:
+ sd_err(("ADMA1 Descriptor Table (%dbytes) @virt/phys: %p/0x%lx\n",
+ SD_PAGE, sd->adma2_dscr_buf, sd->adma2_dscr_phys));
+ sd_err((" #[Descr VA ] Buffer PA | Flags (5:4 2 1 0) |\n"));
+
+ for (i = 0; adma1_dscr_table->phys_addr_attr & ADMA2_ATTRIBUTE_VALID; i++) {
+ flags = adma1_dscr_table->phys_addr_attr & 0x3F;
+ sprintf(flags_str, "%s%s%s%s",
+ ((flags & ADMA2_ATTRIBUTE_ACT_LINK) ==
+ ADMA2_ATTRIBUTE_ACT_LINK) ? "LINK " :
+ ((flags & ADMA2_ATTRIBUTE_ACT_LINK) ==
+ ADMA2_ATTRIBUTE_ACT_TRAN) ? "TRAN " :
+ ((flags & ADMA2_ATTRIBUTE_ACT_LINK) ==
+ ADMA2_ATTRIBUTE_ACT_NOP) ? "NOP " : "SET ",
+ (flags & ADMA2_ATTRIBUTE_INT ? "INT " : " "),
+ (flags & ADMA2_ATTRIBUTE_END ? "END " : " "),
+ (flags & ADMA2_ATTRIBUTE_VALID ? "VALID" : ""));
+ sd_err(("%2d[0x%p]: 0x%08x | 0x%04x | (%s) |\n",
+ i, adma1_dscr_table,
+ adma1_dscr_table->phys_addr_attr & 0xFFFFF000,
+ flags, flags_str));
+
+ /* Follow LINK descriptors or skip to next. */
+ if ((flags & ADMA2_ATTRIBUTE_ACT_LINK) ==
+ ADMA2_ATTRIBUTE_ACT_LINK) {
+ adma1_dscr_table = phys_to_virt(
+ adma1_dscr_table->phys_addr_attr & 0xFFFFF000);
+ } else {
+ adma1_dscr_table++;
+ }
+ }
+ break;
+ default:
+ sd_err(("Unknown DMA Descriptor Table Format.\n"));
+ break;
+ }
+}
+
+static void sdstd_dumpregs(sdioh_info_t *sd)
+{
+ sd_err(("IntrStatus: 0x%04x ErrorIntrStatus 0x%04x\n",
+ sdstd_rreg16(sd, SD_IntrStatus),
+ sdstd_rreg16(sd, SD_ErrorIntrStatus)));
+ sd_err(("IntrStatusEnable: 0x%04x ErrorIntrStatusEnable 0x%04x\n",
+ sdstd_rreg16(sd, SD_IntrStatusEnable),
+ sdstd_rreg16(sd, SD_ErrorIntrStatusEnable)));
+ sd_err(("IntrSignalEnable: 0x%04x ErrorIntrSignalEnable 0x%04x\n",
+ sdstd_rreg16(sd, SD_IntrSignalEnable),
+ sdstd_rreg16(sd, SD_ErrorIntrSignalEnable)));
+}
diff --git a/drivers/net/wireless/bcm4329/bcmsdstd_linux.c b/drivers/net/wireless/bcm4329/bcmsdstd_linux.c
new file mode 100644
index 0000000..a8b98e2
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmsdstd_linux.c
@@ -0,0 +1,251 @@
+/*
+ * 'Standard' SDIO HOST CONTROLLER driver - linux portion
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdstd_linux.c,v 1.11.18.2.16.1 2010/08/17 17:03:13 Exp $
+ */
+
+#include <typedefs.h>
+#include <pcicfg.h>
+#include <bcmutils.h>
+#include <sdio.h> /* SDIO Specs */
+#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */
+#include <sdiovar.h> /* to get msglevel bit values */
+
+#include <linux/sched.h> /* request_irq() */
+
+#include <bcmsdstd.h>
+
+struct sdos_info {
+ sdioh_info_t *sd;
+ spinlock_t lock;
+ wait_queue_head_t intr_wait_queue;
+};
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0))
+#define BLOCKABLE() (!in_atomic())
+#else
+#define BLOCKABLE() (!in_interrupt())
+#endif
+
+/* Interrupt handler */
+static irqreturn_t
+sdstd_isr(int irq, void *dev_id
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 20)
+, struct pt_regs *ptregs
+#endif
+)
+{
+ sdioh_info_t *sd;
+ struct sdos_info *sdos;
+ bool ours;
+
+ sd = (sdioh_info_t *)dev_id;
+
+ if (!sd->card_init_done) {
+ sd_err(("%s: Hey Bogus intr...not even initted: irq %d\n", __FUNCTION__, irq));
+ return IRQ_RETVAL(FALSE);
+ } else {
+ ours = check_client_intr(sd);
+
+ /* For local interrupts, wake the waiting process */
+ if (ours && sd->got_hcint) {
+ sd_trace(("INTR->WAKE\n"));
+ sdos = (struct sdos_info *)sd->sdos_info;
+ wake_up_interruptible(&sdos->intr_wait_queue);
+ }
+ return IRQ_RETVAL(ours);
+ }
+}
+
+/* Register with Linux for interrupts */
+int
+sdstd_register_irq(sdioh_info_t *sd, uint irq)
+{
+ sd_trace(("Entering %s: irq == %d\n", __FUNCTION__, irq));
+ if (request_irq(irq, sdstd_isr, IRQF_SHARED, "bcmsdstd", sd) < 0) {
+ sd_err(("%s: request_irq() failed\n", __FUNCTION__));
+ return ERROR;
+ }
+ return SUCCESS;
+}
+
+/* Free Linux irq */
+void
+sdstd_free_irq(uint irq, sdioh_info_t *sd)
+{
+ free_irq(irq, sd);
+}
+
+/* Map Host controller registers */
+
+uint32 *
+sdstd_reg_map(osl_t *osh, int32 addr, int size)
+{
+ return (uint32 *)REG_MAP(addr, size);
+}
+
+void
+sdstd_reg_unmap(osl_t *osh, int32 addr, int size)
+{
+ REG_UNMAP((void*)(uintptr)addr);
+}
+
+int
+sdstd_osinit(sdioh_info_t *sd)
+{
+ struct sdos_info *sdos;
+
+ sdos = (struct sdos_info*)MALLOC(sd->osh, sizeof(struct sdos_info));
+ sd->sdos_info = (void*)sdos;
+ if (sdos == NULL)
+ return BCME_NOMEM;
+
+ sdos->sd = sd;
+ spin_lock_init(&sdos->lock);
+ init_waitqueue_head(&sdos->intr_wait_queue);
+ return BCME_OK;
+}
+
+void
+sdstd_osfree(sdioh_info_t *sd)
+{
+ struct sdos_info *sdos;
+ ASSERT(sd && sd->sdos_info);
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ MFREE(sd->osh, sdos, sizeof(struct sdos_info));
+}
+
+/* Interrupt enable/disable */
+SDIOH_API_RC
+sdioh_interrupt_set(sdioh_info_t *sd, bool enable)
+{
+ ulong flags;
+ struct sdos_info *sdos;
+
+ sd_trace(("%s: %s\n", __FUNCTION__, enable ? "Enabling" : "Disabling"));
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ ASSERT(sdos);
+
+ if (!(sd->host_init_done && sd->card_init_done)) {
+ sd_err(("%s: Card & Host are not initted - bailing\n", __FUNCTION__));
+ return SDIOH_API_RC_FAIL;
+ }
+
+ if (enable && !(sd->intr_handler && sd->intr_handler_arg)) {
+ sd_err(("%s: no handler registered, will not enable\n", __FUNCTION__));
+ return SDIOH_API_RC_FAIL;
+ }
+
+ /* Ensure atomicity for enable/disable calls */
+ spin_lock_irqsave(&sdos->lock, flags);
+
+ sd->client_intr_enabled = enable;
+ if (enable && !sd->lockcount)
+ sdstd_devintr_on(sd);
+ else
+ sdstd_devintr_off(sd);
+
+ spin_unlock_irqrestore(&sdos->lock, flags);
+
+ return SDIOH_API_RC_SUCCESS;
+}
+
+/* Protect against reentrancy (disable device interrupts while executing) */
+void
+sdstd_lock(sdioh_info_t *sd)
+{
+ ulong flags;
+ struct sdos_info *sdos;
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ ASSERT(sdos);
+
+ sd_trace(("%s: %d\n", __FUNCTION__, sd->lockcount));
+
+ spin_lock_irqsave(&sdos->lock, flags);
+ if (sd->lockcount) {
+ sd_err(("%s: Already locked! called from %p\n",
+ __FUNCTION__,
+ __builtin_return_address(0)));
+ ASSERT(sd->lockcount == 0);
+ }
+ sdstd_devintr_off(sd);
+ sd->lockcount++;
+ spin_unlock_irqrestore(&sdos->lock, flags);
+}
+
+/* Enable client interrupt */
+void
+sdstd_unlock(sdioh_info_t *sd)
+{
+ ulong flags;
+ struct sdos_info *sdos;
+
+ sd_trace(("%s: %d, %d\n", __FUNCTION__, sd->lockcount, sd->client_intr_enabled));
+ ASSERT(sd->lockcount > 0);
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+ ASSERT(sdos);
+
+ spin_lock_irqsave(&sdos->lock, flags);
+ if (--sd->lockcount == 0 && sd->client_intr_enabled) {
+ sdstd_devintr_on(sd);
+ }
+ spin_unlock_irqrestore(&sdos->lock, flags);
+}
+
+uint16
+sdstd_waitbits(sdioh_info_t *sd, uint16 norm, uint16 err, bool yield)
+{
+ struct sdos_info *sdos;
+
+ sdos = (struct sdos_info *)sd->sdos_info;
+
+#ifndef BCMSDYIELD
+ ASSERT(!yield);
+#endif
+ sd_trace(("%s: int 0x%02x err 0x%02x yield %d canblock %d\n",
+ __FUNCTION__, norm, err, yield, BLOCKABLE()));
+
+ /* Clear the "interrupt happened" flag and last intrstatus */
+ sd->got_hcint = FALSE;
+ sd->last_intrstatus = 0;
+
+#ifdef BCMSDYIELD
+ if (yield && BLOCKABLE()) {
+ /* Enable interrupts, wait for the indication, then disable */
+ sdstd_intrs_on(sd, norm, err);
+ wait_event_interruptible(sdos->intr_wait_queue, (sd->got_hcint));
+ sdstd_intrs_off(sd, norm, err);
+ } else
+#endif /* BCMSDYIELD */
+ {
+ sdstd_spinbits(sd, norm, err);
+ }
+
+ sd_trace(("%s: last_intrstatus 0x%04x\n", __FUNCTION__, sd->last_intrstatus));
+
+ return sd->last_intrstatus;
+}
diff --git a/drivers/net/wireless/bcm4329/bcmspibrcm.c b/drivers/net/wireless/bcm4329/bcmspibrcm.c
new file mode 100644
index 0000000..0f131a4
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmspibrcm.c
@@ -0,0 +1,1726 @@
+/*
+ * Broadcom BCMSDH to gSPI Protocol Conversion Layer
+ *
+ * Copyright (C) 2010, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior
+ * written permission of Broadcom Corporation.
+ *
+ * $Id: bcmspibrcm.c,v 1.11.2.10.2.9.6.11 2009/05/21 13:21:57 Exp $
+ */
+
+#define HSMODE
+
+#include <typedefs.h>
+
+#include <bcmdevs.h>
+#include <bcmendian.h>
+#include <bcmutils.h>
+#include <osl.h>
+#include <hndsoc.h>
+#include <siutils.h>
+#include <sbchipc.h>
+#include <sbsdio.h>
+#include <spid.h>
+
+#include <bcmsdbus.h> /* bcmsdh to/from specific controller APIs */
+#include <sdiovar.h> /* ioctl/iovars */
+#include <sdio.h>
+
+#include <pcicfg.h>
+
+
+#include <bcmspibrcm.h>
+#include <bcmspi.h>
+
+#define F0_RESPONSE_DELAY 16
+#define F1_RESPONSE_DELAY 16
+#define F2_RESPONSE_DELAY F0_RESPONSE_DELAY
+
+#define CMDLEN 4
+
+#define DWORDMODE_ON (sd->chip == BCM4329_CHIP_ID) && (sd->chiprev == 2) && (sd->dwordmode == TRUE)
+
+/* Globals */
+uint sd_msglevel = 0;
+
+uint sd_hiok = FALSE; /* Use hi-speed mode if available? */
+uint sd_sdmode = SDIOH_MODE_SPI; /* Use SD4 mode by default */
+uint sd_f2_blocksize = 64; /* Default blocksize */
+
+
+uint sd_divisor = 2;
+uint sd_power = 1; /* Default to SD Slot powered ON */
+uint sd_clock = 1; /* Default to SD Clock turned ON */
+uint sd_crc = 0; /* Default to SPI CRC Check turned OFF */
+
+uint8 spi_outbuf[SPI_MAX_PKT_LEN];
+uint8 spi_inbuf[SPI_MAX_PKT_LEN];
+
+/* 128bytes buffer is enough to clear data-not-available and program response-delay F0 bits
+ * assuming we will not exceed F0 response delay > 100 bytes at 48MHz.
+ */
+#define BUF2_PKT_LEN 128
+uint8 spi_outbuf2[BUF2_PKT_LEN];
+uint8 spi_inbuf2[BUF2_PKT_LEN];
+
+/* Prototypes */
+static bool bcmspi_test_card(sdioh_info_t *sd);
+static bool bcmspi_host_device_init_adapt(sdioh_info_t *sd);
+static int bcmspi_set_highspeed_mode(sdioh_info_t *sd, bool hsmode);
+static int bcmspi_cmd_issue(sdioh_info_t *sd, bool use_dma, uint32 cmd_arg,
+ uint32 *data, uint32 datalen);
+static int bcmspi_card_regread(sdioh_info_t *sd, int func, uint32 regaddr,
+ int regsize, uint32 *data);
+static int bcmspi_card_regwrite(sdioh_info_t *sd, int func, uint32 regaddr,
+ int regsize, uint32 data);
+static int bcmspi_card_bytewrite(sdioh_info_t *sd, int func, uint32 regaddr,
+ uint8 *data);
+static int bcmspi_driver_init(sdioh_info_t *sd);
+static int bcmspi_card_buf(sdioh_info_t *sd, int rw, int func, bool fifo,
+ uint32 addr, int nbytes, uint32 *data);
+static int bcmspi_card_regread_fixedaddr(sdioh_info_t *sd, int func, uint32 regaddr, int regsize,
+ uint32 *data);
+static void bcmspi_cmd_getdstatus(sdioh_info_t *sd, uint32 *dstatus_buffer);
+static int bcmspi_update_stats(sdioh_info_t *sd, uint32 cmd_arg);
+
+/*
+ * Public entry points & extern's
+ */
+extern sdioh_info_t *
+sdioh_attach(osl_t *osh, void *bar0, uint irq)
+{
+ sdioh_info_t *sd;
+
+ sd_trace(("%s\n", __FUNCTION__));
+ if ((sd = (sdioh_info_t *)MALLOC(osh, sizeof(sdioh_info_t))) == NULL) {
+ sd_err(("%s: out of memory, malloced %d bytes\n", __FUNCTION__, MALLOCED(osh)));
+ return NULL;
+ }
+ bzero((char *)sd, sizeof(sdioh_info_t));
+ sd->osh = osh;
+ if (spi_osinit(sd) != 0) {
+ sd_err(("%s: spi_osinit() failed\n", __FUNCTION__));
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return NULL;
+ }
+
+ sd->bar0 = bar0;
+ sd->irq = irq;
+ sd->intr_handler = NULL;
+ sd->intr_handler_arg = NULL;
+ sd->intr_handler_valid = FALSE;
+
+ /* Set defaults */
+ sd->use_client_ints = TRUE;
+ sd->sd_use_dma = FALSE; /* DMA Not supported */
+
+ /* Spi device default is 16bit mode, change to 4 when device is changed to 32bit
+ * mode
+ */
+ sd->wordlen = 2;
+
+ if (!spi_hw_attach(sd)) {
+ sd_err(("%s: spi_hw_attach() failed\n", __FUNCTION__));
+ spi_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return (NULL);
+ }
+
+ if (bcmspi_driver_init(sd) != SUCCESS) {
+ sd_err(("%s: bcmspi_driver_init() failed()\n", __FUNCTION__));
+ spi_hw_detach(sd);
+ spi_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return (NULL);
+ }
+
+ if (spi_register_irq(sd, irq) != SUCCESS) {
+ sd_err(("%s: spi_register_irq() failed for irq = %d\n", __FUNCTION__, irq));
+ spi_hw_detach(sd);
+ spi_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ return (NULL);
+ }
+
+ sd_trace(("%s: Done\n", __FUNCTION__));
+
+ return sd;
+}
+
+extern SDIOH_API_RC
+sdioh_detach(osl_t *osh, sdioh_info_t *sd)
+{
+ sd_trace(("%s\n", __FUNCTION__));
+ if (sd) {
+ sd_err(("%s: detaching from hardware\n", __FUNCTION__));
+ spi_free_irq(sd->irq, sd);
+ spi_hw_detach(sd);
+ spi_osfree(sd);
+ MFREE(sd->osh, sd, sizeof(sdioh_info_t));
+ }
+ return SDIOH_API_RC_SUCCESS;
+}
+
+/* Configure callback to client when we recieve client interrupt */
+extern SDIOH_API_RC
+sdioh_interrupt_register(sdioh_info_t *sd, sdioh_cb_fn_t fn, void *argh)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+ sd->intr_handler = fn;
+ sd->intr_handler_arg = argh;
+ sd->intr_handler_valid = TRUE;
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_interrupt_deregister(sdioh_info_t *sd)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+ sd->intr_handler_valid = FALSE;
+ sd->intr_handler = NULL;
+ sd->intr_handler_arg = NULL;
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_interrupt_query(sdioh_info_t *sd, bool *onoff)
+{
+ sd_trace(("%s: Entering\n", __FUNCTION__));
+ *onoff = sd->client_intr_enabled;
+ return SDIOH_API_RC_SUCCESS;
+}
+
+#if defined(DHD_DEBUG)
+extern bool
+sdioh_interrupt_pending(sdioh_info_t *sd)
+{
+ return 0;
+}
+#endif
+
+extern SDIOH_API_RC
+sdioh_query_device(sdioh_info_t *sd)
+{
+ /* Return a BRCM ID appropriate to the dongle class */
+ return (sd->num_funcs > 1) ? BCM4329_D11NDUAL_ID : BCM4318_D11G_ID;
+}
+
+/* Provide dstatus bits of spi-transaction for dhd layers. */
+extern uint32
+sdioh_get_dstatus(sdioh_info_t *sd)
+{
+ return sd->card_dstatus;
+}
+
+extern void
+sdioh_chipinfo(sdioh_info_t *sd, uint32 chip, uint32 chiprev)
+{
+ sd->chip = chip;
+ sd->chiprev = chiprev;
+}
+
+extern void
+sdioh_dwordmode(sdioh_info_t *sd, bool set)
+{
+ uint8 reg = 0;
+ int status;
+
+ if ((status = sdioh_request_byte(sd, SDIOH_READ, SPI_FUNC_0, SPID_STATUS_ENABLE, ®)) !=
+ SUCCESS) {
+ sd_err(("%s: Failed to set dwordmode in gSPI\n", __FUNCTION__));
+ return;
+ }
+
+ if (set) {
+ reg |= DWORD_PKT_LEN_EN;
+ sd->dwordmode = TRUE;
+ sd->client_block_size[SPI_FUNC_2] = 4096; /* h2spi's limit is 4KB, we support 8KB */
+ } else {
+ reg &= ~DWORD_PKT_LEN_EN;
+ sd->dwordmode = FALSE;
+ sd->client_block_size[SPI_FUNC_2] = 2048;
+ }
+
+ if ((status = sdioh_request_byte(sd, SDIOH_WRITE, SPI_FUNC_0, SPID_STATUS_ENABLE, ®)) !=
+ SUCCESS) {
+ sd_err(("%s: Failed to set dwordmode in gSPI\n", __FUNCTION__));
+ return;
+ }
+}
+
+
+uint
+sdioh_query_iofnum(sdioh_info_t *sd)
+{
+ return sd->num_funcs;
+}
+
+/* IOVar table */
+enum {
+ IOV_MSGLEVEL = 1,
+ IOV_BLOCKMODE,
+ IOV_BLOCKSIZE,
+ IOV_DMA,
+ IOV_USEINTS,
+ IOV_NUMINTS,
+ IOV_NUMLOCALINTS,
+ IOV_HOSTREG,
+ IOV_DEVREG,
+ IOV_DIVISOR,
+ IOV_SDMODE,
+ IOV_HISPEED,
+ IOV_HCIREGS,
+ IOV_POWER,
+ IOV_CLOCK,
+ IOV_SPIERRSTATS,
+ IOV_RESP_DELAY_ALL
+};
+
+const bcm_iovar_t sdioh_iovars[] = {
+ {"sd_msglevel", IOV_MSGLEVEL, 0, IOVT_UINT32, 0 },
+ {"sd_blocksize", IOV_BLOCKSIZE, 0, IOVT_UINT32, 0 }, /* ((fn << 16) | size) */
+ {"sd_dma", IOV_DMA, 0, IOVT_BOOL, 0 },
+ {"sd_ints", IOV_USEINTS, 0, IOVT_BOOL, 0 },
+ {"sd_numints", IOV_NUMINTS, 0, IOVT_UINT32, 0 },
+ {"sd_numlocalints", IOV_NUMLOCALINTS, 0, IOVT_UINT32, 0 },
+ {"sd_hostreg", IOV_HOSTREG, 0, IOVT_BUFFER, sizeof(sdreg_t) },
+ {"sd_devreg", IOV_DEVREG, 0, IOVT_BUFFER, sizeof(sdreg_t) },
+ {"sd_divisor", IOV_DIVISOR, 0, IOVT_UINT32, 0 },
+ {"sd_power", IOV_POWER, 0, IOVT_UINT32, 0 },
+ {"sd_clock", IOV_CLOCK, 0, IOVT_UINT32, 0 },
+ {"sd_mode", IOV_SDMODE, 0, IOVT_UINT32, 100},
+ {"sd_highspeed", IOV_HISPEED, 0, IOVT_UINT32, 0},
+ {"spi_errstats", IOV_SPIERRSTATS, 0, IOVT_BUFFER, sizeof(struct spierrstats_t) },
+ {"spi_respdelay", IOV_RESP_DELAY_ALL, 0, IOVT_BOOL, 0 },
+ {NULL, 0, 0, 0, 0 }
+};
+
+int
+sdioh_iovar_op(sdioh_info_t *si, const char *name,
+ void *params, int plen, void *arg, int len, bool set)
+{
+ const bcm_iovar_t *vi = NULL;
+ int bcmerror = 0;
+ int val_size;
+ int32 int_val = 0;
+ bool bool_val;
+ uint32 actionid;
+/*
+ sdioh_regs_t *regs;
+*/
+
+ ASSERT(name);
+ ASSERT(len >= 0);
+
+ /* Get must have return space; Set does not take qualifiers */
+ ASSERT(set || (arg && len));
+ ASSERT(!set || (!params && !plen));
+
+ sd_trace(("%s: Enter (%s %s)\n", __FUNCTION__, (set ? "set" : "get"), name));
+
+ if ((vi = bcm_iovar_lookup(sdioh_iovars, name)) == NULL) {
+ bcmerror = BCME_UNSUPPORTED;
+ goto exit;
+ }
+
+ if ((bcmerror = bcm_iovar_lencheck(vi, arg, len, set)) != 0)
+ goto exit;
+
+ /* Set up params so get and set can share the convenience variables */
+ if (params == NULL) {
+ params = arg;
+ plen = len;
+ }
+
+ if (vi->type == IOVT_VOID)
+ val_size = 0;
+ else if (vi->type == IOVT_BUFFER)
+ val_size = len;
+ else
+ val_size = sizeof(int);
+
+ if (plen >= (int)sizeof(int_val))
+ bcopy(params, &int_val, sizeof(int_val));
+
+ bool_val = (int_val != 0) ? TRUE : FALSE;
+
+ actionid = set ? IOV_SVAL(vi->varid) : IOV_GVAL(vi->varid);
+ switch (actionid) {
+ case IOV_GVAL(IOV_MSGLEVEL):
+ int_val = (int32)sd_msglevel;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_MSGLEVEL):
+ sd_msglevel = int_val;
+ break;
+
+ case IOV_GVAL(IOV_BLOCKSIZE):
+ if ((uint32)int_val > si->num_funcs) {
+ bcmerror = BCME_BADARG;
+ break;
+ }
+ int_val = (int32)si->client_block_size[int_val];
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_DMA):
+ int_val = (int32)si->sd_use_dma;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_DMA):
+ si->sd_use_dma = (bool)int_val;
+ break;
+
+ case IOV_GVAL(IOV_USEINTS):
+ int_val = (int32)si->use_client_ints;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_USEINTS):
+ break;
+
+ case IOV_GVAL(IOV_DIVISOR):
+ int_val = (uint32)sd_divisor;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_DIVISOR):
+ sd_divisor = int_val;
+ if (!spi_start_clock(si, (uint16)sd_divisor)) {
+ sd_err(("%s: set clock failed\n", __FUNCTION__));
+ bcmerror = BCME_ERROR;
+ }
+ break;
+
+ case IOV_GVAL(IOV_POWER):
+ int_val = (uint32)sd_power;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_POWER):
+ sd_power = int_val;
+ break;
+
+ case IOV_GVAL(IOV_CLOCK):
+ int_val = (uint32)sd_clock;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_CLOCK):
+ sd_clock = int_val;
+ break;
+
+ case IOV_GVAL(IOV_SDMODE):
+ int_val = (uint32)sd_sdmode;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_SDMODE):
+ sd_sdmode = int_val;
+ break;
+
+ case IOV_GVAL(IOV_HISPEED):
+ int_val = (uint32)sd_hiok;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_HISPEED):
+ sd_hiok = int_val;
+
+ if (!bcmspi_set_highspeed_mode(si, (bool)sd_hiok)) {
+ sd_err(("%s: Failed changing highspeed mode to %d.\n",
+ __FUNCTION__, sd_hiok));
+ bcmerror = BCME_ERROR;
+ return ERROR;
+ }
+ break;
+
+ case IOV_GVAL(IOV_NUMINTS):
+ int_val = (int32)si->intrcount;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_NUMLOCALINTS):
+ int_val = (int32)si->local_intrcount;
+ bcopy(&int_val, arg, val_size);
+ break;
+ case IOV_GVAL(IOV_DEVREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+ uint8 data;
+
+ if (sdioh_cfg_read(si, sd_ptr->func, sd_ptr->offset, &data)) {
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+
+ int_val = (int)data;
+ bcopy(&int_val, arg, sizeof(int_val));
+ break;
+ }
+
+ case IOV_SVAL(IOV_DEVREG):
+ {
+ sdreg_t *sd_ptr = (sdreg_t *)params;
+ uint8 data = (uint8)sd_ptr->value;
+
+ if (sdioh_cfg_write(si, sd_ptr->func, sd_ptr->offset, &data)) {
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+ break;
+ }
+
+
+ case IOV_GVAL(IOV_SPIERRSTATS):
+ {
+ bcopy(&si->spierrstats, arg, sizeof(struct spierrstats_t));
+ break;
+ }
+
+ case IOV_SVAL(IOV_SPIERRSTATS):
+ {
+ bzero(&si->spierrstats, sizeof(struct spierrstats_t));
+ break;
+ }
+
+ case IOV_GVAL(IOV_RESP_DELAY_ALL):
+ int_val = (int32)si->resp_delay_all;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_RESP_DELAY_ALL):
+ si->resp_delay_all = (bool)int_val;
+ int_val = STATUS_ENABLE|INTR_WITH_STATUS;
+ if (si->resp_delay_all)
+ int_val |= RESP_DELAY_ALL;
+ else {
+ if (bcmspi_card_regwrite(si, SPI_FUNC_0, SPID_RESPONSE_DELAY, 1,
+ F1_RESPONSE_DELAY) != SUCCESS) {
+ sd_err(("%s: Unable to set response delay.\n", __FUNCTION__));
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+ }
+
+ if (bcmspi_card_regwrite(si, SPI_FUNC_0, SPID_STATUS_ENABLE, 1, int_val)
+ != SUCCESS) {
+ sd_err(("%s: Unable to set response delay.\n", __FUNCTION__));
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+ break;
+
+ default:
+ bcmerror = BCME_UNSUPPORTED;
+ break;
+ }
+exit:
+
+ return bcmerror;
+}
+
+extern SDIOH_API_RC
+sdioh_cfg_read(sdioh_info_t *sd, uint fnc_num, uint32 addr, uint8 *data)
+{
+ SDIOH_API_RC status;
+ /* No lock needed since sdioh_request_byte does locking */
+ status = sdioh_request_byte(sd, SDIOH_READ, fnc_num, addr, data);
+ return status;
+}
+
+extern SDIOH_API_RC
+sdioh_cfg_write(sdioh_info_t *sd, uint fnc_num, uint32 addr, uint8 *data)
+{
+ /* No lock needed since sdioh_request_byte does locking */
+ SDIOH_API_RC status;
+
+ if ((fnc_num == SPI_FUNC_1) && (addr == SBSDIO_FUNC1_FRAMECTRL)) {
+ uint8 dummy_data;
+ status = sdioh_cfg_read(sd, fnc_num, addr, &dummy_data);
+ if (status) {
+ sd_err(("sdioh_cfg_read() failed.\n"));
+ return status;
+ }
+ }
+
+ status = sdioh_request_byte(sd, SDIOH_WRITE, fnc_num, addr, data);
+ return status;
+}
+
+extern SDIOH_API_RC
+sdioh_cis_read(sdioh_info_t *sd, uint func, uint8 *cisd, uint32 length)
+{
+ uint32 count;
+ int offset;
+ uint32 cis_byte;
+ uint16 *cis = (uint16 *)cisd;
+ uint bar0 = SI_ENUM_BASE;
+ int status;
+ uint8 data;
+
+ sd_trace(("%s: Func %d\n", __FUNCTION__, func));
+
+ spi_lock(sd);
+
+ /* Set sb window address to 0x18000000 */
+ data = (bar0 >> 8) & SBSDIO_SBADDRLOW_MASK;
+ status = bcmspi_card_bytewrite(sd, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW, &data);
+ if (status == SUCCESS) {
+ data = (bar0 >> 16) & SBSDIO_SBADDRMID_MASK;
+ status = bcmspi_card_bytewrite(sd, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRMID, &data);
+ } else {
+ sd_err(("%s: Unable to set sb-addr-windows\n", __FUNCTION__));
+ spi_unlock(sd);
+ return (BCME_ERROR);
+ }
+ if (status == SUCCESS) {
+ data = (bar0 >> 24) & SBSDIO_SBADDRHIGH_MASK;
+ status = bcmspi_card_bytewrite(sd, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRHIGH, &data);
+ } else {
+ sd_err(("%s: Unable to set sb-addr-windows\n", __FUNCTION__));
+ spi_unlock(sd);
+ return (BCME_ERROR);
+ }
+
+ offset = CC_OTP; /* OTP offset in chipcommon. */
+ for (count = 0; count < length/2; count++) {
+ if (bcmspi_card_regread (sd, SDIO_FUNC_1, offset, 2, &cis_byte) < 0) {
+ sd_err(("%s: regread failed: Can't read CIS\n", __FUNCTION__));
+ spi_unlock(sd);
+ return (BCME_ERROR);
+ }
+
+ *cis = (uint16)cis_byte;
+ cis++;
+ offset += 2;
+ }
+
+ spi_unlock(sd);
+
+ return (BCME_OK);
+}
+
+extern SDIOH_API_RC
+sdioh_request_byte(sdioh_info_t *sd, uint rw, uint func, uint regaddr, uint8 *byte)
+{
+ int status;
+ uint32 cmd_arg;
+ uint32 dstatus;
+ uint32 data = (uint32)(*byte);
+
+ spi_lock(sd);
+
+ cmd_arg = 0;
+ cmd_arg = SFIELD(cmd_arg, SPI_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, SPI_ACCESS, 1); /* Incremental access */
+ cmd_arg = SFIELD(cmd_arg, SPI_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, SPI_RW_FLAG, rw == SDIOH_READ ? 0 : 1);
+ cmd_arg = SFIELD(cmd_arg, SPI_LEN, 1);
+
+ sd_trace(("%s cmd_arg = 0x%x\n", __FUNCTION__, cmd_arg));
+ sd_trace(("%s: rw=%d, func=%d, regaddr=0x%08x, data=0x%x\n", __FUNCTION__, rw, func,
+ regaddr, data));
+
+ if ((status = bcmspi_cmd_issue(sd, sd->sd_use_dma,
+ cmd_arg, &data, 1)) != SUCCESS) {
+ spi_unlock(sd);
+ return status;
+ }
+
+ if (rw == SDIOH_READ)
+ *byte = (uint8)data;
+
+ bcmspi_cmd_getdstatus(sd, &dstatus);
+ if (dstatus)
+ sd_trace(("dstatus =0x%x\n", dstatus));
+
+ spi_unlock(sd);
+ return SDIOH_API_RC_SUCCESS;
+}
+
+extern SDIOH_API_RC
+sdioh_request_word(sdioh_info_t *sd, uint cmd_type, uint rw, uint func, uint addr,
+ uint32 *word, uint nbytes)
+{
+ int status;
+
+ spi_lock(sd);
+
+ if (rw == SDIOH_READ)
+ status = bcmspi_card_regread(sd, func, addr, nbytes, word);
+ else
+ status = bcmspi_card_regwrite(sd, func, addr, nbytes, *word);
+
+ spi_unlock(sd);
+ return (status == SUCCESS ? SDIOH_API_RC_SUCCESS : SDIOH_API_RC_FAIL);
+}
+
+extern SDIOH_API_RC
+sdioh_request_buffer(sdioh_info_t *sd, uint pio_dma, uint fix_inc, uint rw, uint func,
+ uint addr, uint reg_width, uint buflen_u, uint8 *buffer, void *pkt)
+{
+ int len;
+ int buflen = (int)buflen_u;
+ bool fifo = (fix_inc == SDIOH_DATA_FIX);
+
+ spi_lock(sd);
+
+ ASSERT(reg_width == 4);
+ ASSERT(buflen_u < (1 << 30));
+ ASSERT(sd->client_block_size[func]);
+
+ sd_data(("%s: %c len %d r_cnt %d t_cnt %d, pkt @0x%p\n",
+ __FUNCTION__, rw == SDIOH_READ ? 'R' : 'W',
+ buflen_u, sd->r_cnt, sd->t_cnt, pkt));
+
+ /* Break buffer down into blocksize chunks. */
+ while (buflen > 0) {
+ len = MIN(sd->client_block_size[func], buflen);
+ if (bcmspi_card_buf(sd, rw, func, fifo, addr, len, (uint32 *)buffer) != SUCCESS) {
+ sd_err(("%s: bcmspi_card_buf %s failed\n",
+ __FUNCTION__, rw == SDIOH_READ ? "Read" : "Write"));
+ spi_unlock(sd);
+ return SDIOH_API_RC_FAIL;
+ }
+ buffer += len;
+ buflen -= len;
+ if (!fifo)
+ addr += len;
+ }
+ spi_unlock(sd);
+ return SDIOH_API_RC_SUCCESS;
+}
+
+/* This function allows write to gspi bus when another rd/wr function is deep down the call stack.
+ * Its main aim is to have simpler spi writes rather than recursive writes.
+ * e.g. When there is a need to program response delay on the fly after detecting the SPI-func
+ * this call will allow to program the response delay.
+ */
+static int
+bcmspi_card_byterewrite(sdioh_info_t *sd, int func, uint32 regaddr, uint8 byte)
+{
+ uint32 cmd_arg;
+ uint32 datalen = 1;
+ uint32 hostlen;
+
+ cmd_arg = 0;
+
+ cmd_arg = SFIELD(cmd_arg, SPI_RW_FLAG, 1);
+ cmd_arg = SFIELD(cmd_arg, SPI_ACCESS, 1); /* Incremental access */
+ cmd_arg = SFIELD(cmd_arg, SPI_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, SPI_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, SPI_LEN, datalen);
+
+ sd_trace(("%s cmd_arg = 0x%x\n", __FUNCTION__, cmd_arg));
+
+
+ /* Set up and issue the SPI command. MSByte goes out on bus first. Increase datalen
+ * according to the wordlen mode(16/32bit) the device is in.
+ */
+ ASSERT(sd->wordlen == 4 || sd->wordlen == 2);
+ datalen = ROUNDUP(datalen, sd->wordlen);
+
+ /* Start by copying command in the spi-outbuffer */
+ if (sd->wordlen == 4) { /* 32bit spid */
+ *(uint32 *)spi_outbuf2 = bcmswap32(cmd_arg);
+ if (datalen & 0x3)
+ datalen += (4 - (datalen & 0x3));
+ } else if (sd->wordlen == 2) { /* 16bit spid */
+ *(uint16 *)spi_outbuf2 = bcmswap16(cmd_arg & 0xffff);
+ *(uint16 *)&spi_outbuf2[2] = bcmswap16((cmd_arg & 0xffff0000) >> 16);
+ if (datalen & 0x1)
+ datalen++;
+ } else {
+ sd_err(("%s: Host is %d bit spid, could not create SPI command.\n",
+ __FUNCTION__, 8 * sd->wordlen));
+ return ERROR;
+ }
+
+ /* for Write, put the data into the output buffer */
+ if (datalen != 0) {
+ if (sd->wordlen == 4) { /* 32bit spid */
+ *(uint32 *)&spi_outbuf2[CMDLEN] = bcmswap32(byte);
+ } else if (sd->wordlen == 2) { /* 16bit spid */
+ *(uint16 *)&spi_outbuf2[CMDLEN] = bcmswap16(byte & 0xffff);
+ *(uint16 *)&spi_outbuf2[CMDLEN + 2] =
+ bcmswap16((byte & 0xffff0000) >> 16);
+ }
+ }
+
+ /* +4 for cmd, +4 for dstatus */
+ hostlen = datalen + 8;
+ hostlen += (4 - (hostlen & 0x3));
+ spi_sendrecv(sd, spi_outbuf2, spi_inbuf2, hostlen);
+
+ /* Last 4bytes are dstatus. Device is configured to return status bits. */
+ if (sd->wordlen == 4) { /* 32bit spid */
+ sd->card_dstatus = bcmswap32(*(uint32 *)&spi_inbuf2[datalen + CMDLEN ]);
+ } else if (sd->wordlen == 2) { /* 16bit spid */
+ sd->card_dstatus = (bcmswap16(*(uint16 *)&spi_inbuf2[datalen + CMDLEN ]) |
+ (bcmswap16(*(uint16 *)&spi_inbuf2[datalen + CMDLEN + 2]) << 16));
+ } else {
+ sd_err(("%s: Host is %d bit machine, could not read SPI dstatus.\n",
+ __FUNCTION__, 8 * sd->wordlen));
+ return ERROR;
+ }
+
+ if (sd->card_dstatus)
+ sd_trace(("dstatus after byte rewrite = 0x%x\n", sd->card_dstatus));
+
+ return (BCME_OK);
+}
+
+/* Program the response delay corresponding to the spi function */
+static int
+bcmspi_prog_resp_delay(sdioh_info_t *sd, int func, uint8 resp_delay)
+{
+ if (sd->resp_delay_all == FALSE)
+ return (BCME_OK);
+
+ if (sd->prev_fun == func)
+ return (BCME_OK);
+
+ if (F0_RESPONSE_DELAY == F1_RESPONSE_DELAY)
+ return (BCME_OK);
+
+ bcmspi_card_byterewrite(sd, SPI_FUNC_0, SPID_RESPONSE_DELAY, resp_delay);
+
+ /* Remember function for which to avoid reprogramming resp-delay in next iteration */
+ sd->prev_fun = func;
+
+ return (BCME_OK);
+
+}
+
+#define GSPI_RESYNC_PATTERN 0x0
+
+/* A resync pattern is a 32bit MOSI line with all zeros. Its a special command in gSPI.
+ * It resets the spi-bkplane logic so that all F1 related ping-pong buffer logic is
+ * synchronised and all queued resuests are cancelled.
+ */
+static int
+bcmspi_resync_f1(sdioh_info_t *sd)
+{
+ uint32 cmd_arg = GSPI_RESYNC_PATTERN, data = 0, datalen = 0;
+
+
+ /* Set up and issue the SPI command. MSByte goes out on bus first. Increase datalen
+ * according to the wordlen mode(16/32bit) the device is in.
+ */
+ ASSERT(sd->wordlen == 4 || sd->wordlen == 2);
+ datalen = ROUNDUP(datalen, sd->wordlen);
+
+ /* Start by copying command in the spi-outbuffer */
+ *(uint32 *)spi_outbuf2 = cmd_arg;
+
+ /* for Write, put the data into the output buffer */
+ *(uint32 *)&spi_outbuf2[CMDLEN] = data;
+
+ /* +4 for cmd, +4 for dstatus */
+ spi_sendrecv(sd, spi_outbuf2, spi_inbuf2, datalen + 8);
+
+ /* Last 4bytes are dstatus. Device is configured to return status bits. */
+ if (sd->wordlen == 4) { /* 32bit spid */
+ sd->card_dstatus = bcmswap32(*(uint32 *)&spi_inbuf2[datalen + CMDLEN ]);
+ } else if (sd->wordlen == 2) { /* 16bit spid */
+ sd->card_dstatus = (bcmswap16(*(uint16 *)&spi_inbuf2[datalen + CMDLEN ]) |
+ (bcmswap16(*(uint16 *)&spi_inbuf2[datalen + CMDLEN + 2]) << 16));
+ } else {
+ sd_err(("%s: Host is %d bit machine, could not read SPI dstatus.\n",
+ __FUNCTION__, 8 * sd->wordlen));
+ return ERROR;
+ }
+
+ if (sd->card_dstatus)
+ sd_trace(("dstatus after resync pattern write = 0x%x\n", sd->card_dstatus));
+
+ return (BCME_OK);
+}
+
+uint32 dstatus_count = 0;
+
+static int
+bcmspi_update_stats(sdioh_info_t *sd, uint32 cmd_arg)
+{
+ uint32 dstatus = sd->card_dstatus;
+ struct spierrstats_t *spierrstats = &sd->spierrstats;
+ int err = SUCCESS;
+
+ sd_trace(("cmd = 0x%x, dstatus = 0x%x\n", cmd_arg, dstatus));
+
+ /* Store dstatus of last few gSPI transactions */
+ spierrstats->dstatus[dstatus_count % NUM_PREV_TRANSACTIONS] = dstatus;
+ spierrstats->spicmd[dstatus_count % NUM_PREV_TRANSACTIONS] = cmd_arg;
+ dstatus_count++;
+
+ if (sd->card_init_done == FALSE)
+ return err;
+
+ if (dstatus & STATUS_DATA_NOT_AVAILABLE) {
+ spierrstats->dna++;
+ sd_trace(("Read data not available on F1 addr = 0x%x\n",
+ GFIELD(cmd_arg, SPI_REG_ADDR)));
+ /* Clear dna bit */
+ bcmspi_card_byterewrite(sd, SPI_FUNC_0, SPID_INTR_REG, DATA_UNAVAILABLE);
+ }
+
+ if (dstatus & STATUS_UNDERFLOW) {
+ spierrstats->rdunderflow++;
+ sd_err(("FIFO underflow happened due to current F2 read command.\n"));
+ }
+
+ if (dstatus & STATUS_OVERFLOW) {
+ spierrstats->wroverflow++;
+ sd_err(("FIFO overflow happened due to current (F1/F2) write command.\n"));
+ if ((sd->chip == BCM4329_CHIP_ID) && (sd->chiprev == 0)) {
+ bcmspi_card_byterewrite(sd, SPI_FUNC_0, SPID_INTR_REG, F1_OVERFLOW);
+ bcmspi_resync_f1(sd);
+ sd_err(("Recovering from F1 FIFO overflow.\n"));
+ } else {
+ err = ERROR_OF;
+ }
+ }
+
+ if (dstatus & STATUS_F2_INTR) {
+ spierrstats->f2interrupt++;
+ sd_trace(("Interrupt from F2. SW should clear corresponding IntStatus bits\n"));
+ }
+
+ if (dstatus & STATUS_F3_INTR) {
+ spierrstats->f3interrupt++;
+ sd_err(("Interrupt from F3. SW should clear corresponding IntStatus bits\n"));
+ }
+
+ if (dstatus & STATUS_HOST_CMD_DATA_ERR) {
+ spierrstats->hostcmddataerr++;
+ sd_err(("Error in CMD or Host data, detected by CRC/Checksum (optional)\n"));
+ }
+
+ if (dstatus & STATUS_F2_PKT_AVAILABLE) {
+ spierrstats->f2pktavailable++;
+ sd_trace(("Packet is available/ready in F2 TX FIFO\n"));
+ sd_trace(("Packet length = %d\n", sd->dwordmode ?
+ ((dstatus & STATUS_F2_PKT_LEN_MASK) >> (STATUS_F2_PKT_LEN_SHIFT - 2)) :
+ ((dstatus & STATUS_F2_PKT_LEN_MASK) >> STATUS_F2_PKT_LEN_SHIFT)));
+ }
+
+ if (dstatus & STATUS_F3_PKT_AVAILABLE) {
+ spierrstats->f3pktavailable++;
+ sd_err(("Packet is available/ready in F3 TX FIFO\n"));
+ sd_err(("Packet length = %d\n",
+ (dstatus & STATUS_F3_PKT_LEN_MASK) >> STATUS_F3_PKT_LEN_SHIFT));
+ }
+
+ return err;
+}
+
+extern int
+sdioh_abort(sdioh_info_t *sd, uint func)
+{
+ return 0;
+}
+
+int
+sdioh_start(sdioh_info_t *sd, int stage)
+{
+ return SUCCESS;
+}
+
+int
+sdioh_stop(sdioh_info_t *sd)
+{
+ return SUCCESS;
+}
+
+
+
+/*
+ * Private/Static work routines
+ */
+static int
+bcmspi_host_init(sdioh_info_t *sd)
+{
+
+ /* Default power on mode */
+ sd->sd_mode = SDIOH_MODE_SPI;
+ sd->polled_mode = TRUE;
+ sd->host_init_done = TRUE;
+ sd->card_init_done = FALSE;
+ sd->adapter_slot = 1;
+
+ return (SUCCESS);
+}
+
+static int
+get_client_blocksize(sdioh_info_t *sd)
+{
+ uint32 regdata[2];
+ int status;
+
+ /* Find F1/F2/F3 max packet size */
+ if ((status = bcmspi_card_regread(sd, 0, SPID_F1_INFO_REG,
+ 8, regdata)) != SUCCESS) {
+ return status;
+ }
+
+ sd_trace(("pkt_size regdata[0] = 0x%x, regdata[1] = 0x%x\n",
+ regdata[0], regdata[1]));
+
+ sd->client_block_size[1] = (regdata[0] & F1_MAX_PKT_SIZE) >> 2;
+ sd_trace(("Func1 blocksize = %d\n", sd->client_block_size[1]));
+ ASSERT(sd->client_block_size[1] == BLOCK_SIZE_F1);
+
+ sd->client_block_size[2] = ((regdata[0] >> 16) & F2_MAX_PKT_SIZE) >> 2;
+ sd_trace(("Func2 blocksize = %d\n", sd->client_block_size[2]));
+ ASSERT(sd->client_block_size[2] == BLOCK_SIZE_F2);
+
+ sd->client_block_size[3] = (regdata[1] & F3_MAX_PKT_SIZE) >> 2;
+ sd_trace(("Func3 blocksize = %d\n", sd->client_block_size[3]));
+ ASSERT(sd->client_block_size[3] == BLOCK_SIZE_F3);
+
+ return 0;
+}
+
+static int
+bcmspi_client_init(sdioh_info_t *sd)
+{
+ uint32 status_en_reg = 0;
+ sd_trace(("%s: Powering up slot %d\n", __FUNCTION__, sd->adapter_slot));
+
+#ifdef HSMODE
+ if (!spi_start_clock(sd, (uint16)sd_divisor)) {
+ sd_err(("spi_start_clock failed\n"));
+ return ERROR;
+ }
+#else
+ /* Start at ~400KHz clock rate for initialization */
+ if (!spi_start_clock(sd, 128)) {
+ sd_err(("spi_start_clock failed\n"));
+ return ERROR;
+ }
+#endif /* HSMODE */
+
+ if (!bcmspi_host_device_init_adapt(sd)) {
+ sd_err(("bcmspi_host_device_init_adapt failed\n"));
+ return ERROR;
+ }
+
+ if (!bcmspi_test_card(sd)) {
+ sd_err(("bcmspi_test_card failed\n"));
+ return ERROR;
+ }
+
+ sd->num_funcs = SPI_MAX_IOFUNCS;
+
+ get_client_blocksize(sd);
+
+ /* Apply resync pattern cmd with all zeros to reset spi-bkplane F1 logic */
+ bcmspi_resync_f1(sd);
+
+ sd->dwordmode = FALSE;
+
+ bcmspi_card_regread(sd, 0, SPID_STATUS_ENABLE, 1, &status_en_reg);
+
+ sd_trace(("%s: Enabling interrupt with dstatus \n", __FUNCTION__));
+ status_en_reg |= INTR_WITH_STATUS;
+
+
+ if (bcmspi_card_regwrite(sd, SPI_FUNC_0, SPID_STATUS_ENABLE, 1,
+ status_en_reg & 0xff) != SUCCESS) {
+ sd_err(("%s: Unable to set response delay for all fun's.\n", __FUNCTION__));
+ return ERROR;
+ }
+
+
+#ifndef HSMODE
+ /* After configuring for High-Speed mode, set the desired clock rate. */
+ if (!spi_start_clock(sd, 4)) {
+ sd_err(("spi_start_clock failed\n"));
+ return ERROR;
+ }
+#endif /* HSMODE */
+
+ sd->card_init_done = TRUE;
+
+
+ return SUCCESS;
+}
+
+static int
+bcmspi_set_highspeed_mode(sdioh_info_t *sd, bool hsmode)
+{
+ uint32 regdata;
+ int status;
+
+ if ((status = bcmspi_card_regread(sd, 0, SPID_CONFIG,
+ 4, ®data)) != SUCCESS)
+ return status;
+
+ sd_trace(("In %s spih-ctrl = 0x%x \n", __FUNCTION__, regdata));
+
+
+ if (hsmode == TRUE) {
+ sd_trace(("Attempting to enable High-Speed mode.\n"));
+
+ if (regdata & HIGH_SPEED_MODE) {
+ sd_trace(("Device is already in High-Speed mode.\n"));
+ return status;
+ } else {
+ regdata |= HIGH_SPEED_MODE;
+ sd_trace(("Writing %08x to device at %08x\n", regdata, SPID_CONFIG));
+ if ((status = bcmspi_card_regwrite(sd, 0, SPID_CONFIG,
+ 4, regdata)) != SUCCESS) {
+ return status;
+ }
+ }
+ } else {
+ sd_trace(("Attempting to disable High-Speed mode.\n"));
+
+ if (regdata & HIGH_SPEED_MODE) {
+ regdata &= ~HIGH_SPEED_MODE;
+ sd_trace(("Writing %08x to device at %08x\n", regdata, SPID_CONFIG));
+ if ((status = bcmspi_card_regwrite(sd, 0, SPID_CONFIG,
+ 4, regdata)) != SUCCESS)
+ return status;
+ }
+ else {
+ sd_trace(("Device is already in Low-Speed mode.\n"));
+ return status;
+ }
+ }
+
+ spi_controller_highspeed_mode(sd, hsmode);
+
+ return TRUE;
+}
+
+#define bcmspi_find_curr_mode(sd) { \
+ sd->wordlen = 2; \
+ status = bcmspi_card_regread_fixedaddr(sd, 0, SPID_TEST_READ, 4, ®data); \
+ regdata &= 0xff; \
+ if ((regdata == 0xad) || (regdata == 0x5b) || \
+ (regdata == 0x5d) || (regdata == 0x5a)) \
+ break; \
+ sd->wordlen = 4; \
+ status = bcmspi_card_regread_fixedaddr(sd, 0, SPID_TEST_READ, 4, ®data); \
+ regdata &= 0xff; \
+ if ((regdata == 0xad) || (regdata == 0x5b) || \
+ (regdata == 0x5d) || (regdata == 0x5a)) \
+ break; \
+ sd_trace(("Silicon testability issue: regdata = 0x%x." \
+ " Expected 0xad, 0x5a, 0x5b or 0x5d.\n", regdata)); \
+ OSL_DELAY(100000); \
+}
+
+#define INIT_ADAPT_LOOP 100
+
+/* Adapt clock-phase-speed-bitwidth between host and device */
+static bool
+bcmspi_host_device_init_adapt(sdioh_info_t *sd)
+{
+ uint32 wrregdata, regdata = 0;
+ int status;
+ int i;
+
+ /* Due to a silicon testability issue, the first command from the Host
+ * to the device will get corrupted (first bit will be lost). So the
+ * Host should poll the device with a safe read request. ie: The Host
+ * should try to read F0 addr 0x14 using the Fixed address mode
+ * (This will prevent a unintended write command to be detected by device)
+ */
+ for (i = 0; i < INIT_ADAPT_LOOP; i++) {
+ /* If device was not power-cycled it will stay in 32bit mode with
+ * response-delay-all bit set. Alternate the iteration so that
+ * read either with or without response-delay for F0 to succeed.
+ */
+ bcmspi_find_curr_mode(sd);
+ sd->resp_delay_all = (i & 0x1) ? TRUE : FALSE;
+
+ bcmspi_find_curr_mode(sd);
+ sd->dwordmode = TRUE;
+
+ bcmspi_find_curr_mode(sd);
+ sd->dwordmode = FALSE;
+ }
+
+ /* Bail out, device not detected */
+ if (i == INIT_ADAPT_LOOP)
+ return FALSE;
+
+ /* Softreset the spid logic */
+ if ((sd->dwordmode) || (sd->wordlen == 4)) {
+ bcmspi_card_regwrite(sd, 0, SPID_RESET_BP, 1, RESET_ON_WLAN_BP_RESET|RESET_SPI);
+ bcmspi_card_regread(sd, 0, SPID_RESET_BP, 1, ®data);
+ sd_trace(("reset reg read = 0x%x\n", regdata));
+ sd_trace(("dwordmode = %d, wordlen = %d, resp_delay_all = %d\n", sd->dwordmode,
+ sd->wordlen, sd->resp_delay_all));
+ /* Restore default state after softreset */
+ sd->wordlen = 2;
+ sd->dwordmode = FALSE;
+ }
+
+ if (sd->wordlen == 4) {
+ if ((status = bcmspi_card_regread(sd, 0, SPID_TEST_READ, 4, ®data)) !=
+ SUCCESS)
+ return FALSE;
+ if (regdata == TEST_RO_DATA_32BIT_LE) {
+ sd_trace(("Spid is already in 32bit LE mode. Value read = 0x%x\n",
+ regdata));
+ sd_trace(("Spid power was left on.\n"));
+ } else {
+ sd_err(("Spid power was left on but signature read failed."
+ " Value read = 0x%x\n", regdata));
+ return FALSE;
+ }
+ } else {
+ sd->wordlen = 2;
+
+#define CTRL_REG_DEFAULT 0x00010430 /* according to the host m/c */
+
+ wrregdata = (CTRL_REG_DEFAULT);
+ sd->resp_delay_all = TRUE;
+ if (sd->resp_delay_all == TRUE) {
+ /* Enable response delay for all */
+ wrregdata |= (RESP_DELAY_ALL << 16);
+ /* Program response delay value */
+ wrregdata &= 0xffff00ff;
+ wrregdata |= (F1_RESPONSE_DELAY << 8);
+ sd->prev_fun = SPI_FUNC_1;
+ bcmspi_card_regwrite(sd, 0, SPID_CONFIG, 4, wrregdata);
+ }
+
+ if ((status = bcmspi_card_regread(sd, 0, SPID_TEST_READ, 4, ®data)) != SUCCESS)
+ return FALSE;
+ sd_trace(("(we are still in 16bit mode) 32bit READ LE regdata = 0x%x\n", regdata));
+
+#ifndef HSMODE
+ wrregdata |= (CLOCK_PHASE | CLOCK_POLARITY);
+ wrregdata &= ~HIGH_SPEED_MODE;
+ bcmspi_card_regwrite(sd, 0, SPID_CONFIG, 4, wrregdata);
+#endif /* HSMODE */
+
+ for (i = 0; i < INIT_ADAPT_LOOP; i++) {
+ if ((regdata == 0xfdda7d5b) || (regdata == 0xfdda7d5a)) {
+ sd_trace(("0xfeedbead was leftshifted by 1-bit.\n"));
+ if ((status = bcmspi_card_regread(sd, 0, SPID_TEST_READ, 4,
+ ®data)) != SUCCESS)
+ return FALSE;
+ }
+ OSL_DELAY(1000);
+ }
+
+
+ /* Change to host controller intr-polarity of active-low */
+ wrregdata &= ~INTR_POLARITY;
+ sd_trace(("(we are still in 16bit mode) 32bit Write LE reg-ctrl-data = 0x%x\n",
+ wrregdata));
+ /* Change to 32bit mode */
+ wrregdata |= WORD_LENGTH_32;
+ bcmspi_card_regwrite(sd, 0, SPID_CONFIG, 4, wrregdata);
+
+ /* Change command/data packaging in 32bit LE mode */
+ sd->wordlen = 4;
+
+ if ((status = bcmspi_card_regread(sd, 0, SPID_TEST_READ, 4, ®data)) != SUCCESS)
+ return FALSE;
+
+ if (regdata == TEST_RO_DATA_32BIT_LE) {
+ sd_trace(("Read spid passed. Value read = 0x%x\n", regdata));
+ sd_trace(("Spid had power-on cycle OR spi was soft-resetted \n"));
+ } else {
+ sd_err(("Stale spid reg values read as it was kept powered. Value read ="
+ "0x%x\n", regdata));
+ return FALSE;
+ }
+ }
+
+
+ return TRUE;
+}
+
+static bool
+bcmspi_test_card(sdioh_info_t *sd)
+{
+ uint32 regdata;
+ int status;
+
+ if ((status = bcmspi_card_regread(sd, 0, SPID_TEST_READ, 4, ®data)) != SUCCESS)
+ return FALSE;
+
+ if (regdata == (TEST_RO_DATA_32BIT_LE))
+ sd_trace(("32bit LE regdata = 0x%x\n", regdata));
+ else {
+ sd_trace(("Incorrect 32bit LE regdata = 0x%x\n", regdata));
+ return FALSE;
+ }
+
+
+#define RW_PATTERN1 0xA0A1A2A3
+#define RW_PATTERN2 0x4B5B6B7B
+
+ regdata = RW_PATTERN1;
+ if ((status = bcmspi_card_regwrite(sd, 0, SPID_TEST_RW, 4, regdata)) != SUCCESS)
+ return FALSE;
+ regdata = 0;
+ if ((status = bcmspi_card_regread(sd, 0, SPID_TEST_RW, 4, ®data)) != SUCCESS)
+ return FALSE;
+ if (regdata != RW_PATTERN1) {
+ sd_err(("Write-Read spid failed. Value wrote = 0x%x, Value read = 0x%x\n",
+ RW_PATTERN1, regdata));
+ return FALSE;
+ } else
+ sd_trace(("R/W spid passed. Value read = 0x%x\n", regdata));
+
+ regdata = RW_PATTERN2;
+ if ((status = bcmspi_card_regwrite(sd, 0, SPID_TEST_RW, 4, regdata)) != SUCCESS)
+ return FALSE;
+ regdata = 0;
+ if ((status = bcmspi_card_regread(sd, 0, SPID_TEST_RW, 4, ®data)) != SUCCESS)
+ return FALSE;
+ if (regdata != RW_PATTERN2) {
+ sd_err(("Write-Read spid failed. Value wrote = 0x%x, Value read = 0x%x\n",
+ RW_PATTERN2, regdata));
+ return FALSE;
+ } else
+ sd_trace(("R/W spid passed. Value read = 0x%x\n", regdata));
+
+ return TRUE;
+}
+
+static int
+bcmspi_driver_init(sdioh_info_t *sd)
+{
+ sd_trace(("%s\n", __FUNCTION__));
+ if ((bcmspi_host_init(sd)) != SUCCESS) {
+ return ERROR;
+ }
+
+ if (bcmspi_client_init(sd) != SUCCESS) {
+ return ERROR;
+ }
+
+ return SUCCESS;
+}
+
+/* Read device reg */
+static int
+bcmspi_card_regread(sdioh_info_t *sd, int func, uint32 regaddr, int regsize, uint32 *data)
+{
+ int status;
+ uint32 cmd_arg, dstatus;
+
+ ASSERT(regsize);
+
+ if (func == 2)
+ sd_trace(("Reg access on F2 will generate error indication in dstatus bits.\n"));
+
+ cmd_arg = 0;
+ cmd_arg = SFIELD(cmd_arg, SPI_RW_FLAG, 0);
+ cmd_arg = SFIELD(cmd_arg, SPI_ACCESS, 1); /* Incremental access */
+ cmd_arg = SFIELD(cmd_arg, SPI_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, SPI_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, SPI_LEN, regsize == BLOCK_SIZE_F2 ? 0 : regsize);
+
+ sd_trace(("%s cmd_arg = 0x%x\n", __FUNCTION__, cmd_arg));
+ sd_trace(("%s: rw=%d, func=%d, regaddr=0x%08x, data=0x%x\n", __FUNCTION__, 0, func,
+ regaddr, *data));
+
+ if ((status = bcmspi_cmd_issue(sd, sd->sd_use_dma, cmd_arg, data, regsize))
+ != SUCCESS)
+ return status;
+
+ bcmspi_cmd_getdstatus(sd, &dstatus);
+ if (dstatus)
+ sd_trace(("dstatus =0x%x\n", dstatus));
+
+ return SUCCESS;
+}
+
+static int
+bcmspi_card_regread_fixedaddr(sdioh_info_t *sd, int func, uint32 regaddr, int regsize, uint32 *data)
+{
+
+ int status;
+ uint32 cmd_arg;
+ uint32 dstatus;
+
+ ASSERT(regsize);
+
+ if (func == 2)
+ sd_trace(("Reg access on F2 will generate error indication in dstatus bits.\n"));
+
+ cmd_arg = 0;
+ cmd_arg = SFIELD(cmd_arg, SPI_RW_FLAG, 0);
+ cmd_arg = SFIELD(cmd_arg, SPI_ACCESS, 0); /* Fixed access */
+ cmd_arg = SFIELD(cmd_arg, SPI_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, SPI_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, SPI_LEN, regsize);
+
+ sd_trace(("%s cmd_arg = 0x%x\n", __FUNCTION__, cmd_arg));
+
+ if ((status = bcmspi_cmd_issue(sd, sd->sd_use_dma, cmd_arg, data, regsize))
+ != SUCCESS)
+ return status;
+
+ sd_trace(("%s: rw=%d, func=%d, regaddr=0x%08x, data=0x%x\n", __FUNCTION__, 0, func,
+ regaddr, *data));
+
+ bcmspi_cmd_getdstatus(sd, &dstatus);
+ sd_trace(("dstatus =0x%x\n", dstatus));
+ return SUCCESS;
+}
+
+/* write a device register */
+static int
+bcmspi_card_regwrite(sdioh_info_t *sd, int func, uint32 regaddr, int regsize, uint32 data)
+{
+ int status;
+ uint32 cmd_arg, dstatus;
+
+ ASSERT(regsize);
+
+ cmd_arg = 0;
+
+ cmd_arg = SFIELD(cmd_arg, SPI_RW_FLAG, 1);
+ cmd_arg = SFIELD(cmd_arg, SPI_ACCESS, 1); /* Incremental access */
+ cmd_arg = SFIELD(cmd_arg, SPI_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, SPI_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, SPI_LEN, regsize == BLOCK_SIZE_F2 ? 0 : regsize);
+
+ sd_trace(("%s cmd_arg = 0x%x\n", __FUNCTION__, cmd_arg));
+ sd_trace(("%s: rw=%d, func=%d, regaddr=0x%08x, data=0x%x\n", __FUNCTION__, 1, func,
+ regaddr, data));
+
+
+ if ((status = bcmspi_cmd_issue(sd, sd->sd_use_dma, cmd_arg, &data, regsize))
+ != SUCCESS)
+ return status;
+
+ bcmspi_cmd_getdstatus(sd, &dstatus);
+ if (dstatus)
+ sd_trace(("dstatus =0x%x\n", dstatus));
+
+ return SUCCESS;
+}
+
+/* write a device register - 1 byte */
+static int
+bcmspi_card_bytewrite(sdioh_info_t *sd, int func, uint32 regaddr, uint8 *byte)
+{
+ int status;
+ uint32 cmd_arg;
+ uint32 dstatus;
+ uint32 data = (uint32)(*byte);
+
+ cmd_arg = 0;
+ cmd_arg = SFIELD(cmd_arg, SPI_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, SPI_ACCESS, 1); /* Incremental access */
+ cmd_arg = SFIELD(cmd_arg, SPI_REG_ADDR, regaddr);
+ cmd_arg = SFIELD(cmd_arg, SPI_RW_FLAG, 1);
+ cmd_arg = SFIELD(cmd_arg, SPI_LEN, 1);
+
+ sd_trace(("%s cmd_arg = 0x%x\n", __FUNCTION__, cmd_arg));
+ sd_trace(("%s: func=%d, regaddr=0x%08x, data=0x%x\n", __FUNCTION__, func,
+ regaddr, data));
+
+ if ((status = bcmspi_cmd_issue(sd, sd->sd_use_dma,
+ cmd_arg, &data, 1)) != SUCCESS) {
+ return status;
+ }
+
+ bcmspi_cmd_getdstatus(sd, &dstatus);
+ if (dstatus)
+ sd_trace(("dstatus =0x%x\n", dstatus));
+
+ return SUCCESS;
+}
+
+void
+bcmspi_cmd_getdstatus(sdioh_info_t *sd, uint32 *dstatus_buffer)
+{
+ *dstatus_buffer = sd->card_dstatus;
+}
+
+/* 'data' is of type uint32 whereas other buffers are of type uint8 */
+static int
+bcmspi_cmd_issue(sdioh_info_t *sd, bool use_dma, uint32 cmd_arg,
+ uint32 *data, uint32 datalen)
+{
+ uint32 i, j;
+ uint8 resp_delay = 0;
+ int err = SUCCESS;
+ uint32 hostlen;
+ uint32 spilen = 0;
+ uint32 dstatus_idx = 0;
+ uint16 templen, buslen, len, *ptr = NULL;
+
+ sd_trace(("spi cmd = 0x%x\n", cmd_arg));
+
+ if (DWORDMODE_ON) {
+ spilen = GFIELD(cmd_arg, SPI_LEN);
+ if ((GFIELD(cmd_arg, SPI_FUNCTION) == SPI_FUNC_0) ||
+ (GFIELD(cmd_arg, SPI_FUNCTION) == SPI_FUNC_1))
+ dstatus_idx = spilen * 3;
+
+ if ((GFIELD(cmd_arg, SPI_FUNCTION) == SPI_FUNC_2) &&
+ (GFIELD(cmd_arg, SPI_RW_FLAG) == 1)) {
+ spilen = spilen << 2;
+ dstatus_idx = (spilen % 16) ? (16 - (spilen % 16)) : 0;
+ /* convert len to mod16 size */
+ spilen = ROUNDUP(spilen, 16);
+ cmd_arg = SFIELD(cmd_arg, SPI_LEN, (spilen >> 2));
+ }
+ }
+
+ /* Set up and issue the SPI command. MSByte goes out on bus first. Increase datalen
+ * according to the wordlen mode(16/32bit) the device is in.
+ */
+ if (sd->wordlen == 4) { /* 32bit spid */
+ *(uint32 *)spi_outbuf = bcmswap32(cmd_arg);
+ if (datalen & 0x3)
+ datalen += (4 - (datalen & 0x3));
+ } else if (sd->wordlen == 2) { /* 16bit spid */
+ *(uint16 *)spi_outbuf = bcmswap16(cmd_arg & 0xffff);
+ *(uint16 *)&spi_outbuf[2] = bcmswap16((cmd_arg & 0xffff0000) >> 16);
+ if (datalen & 0x1)
+ datalen++;
+ if (datalen < 4)
+ datalen = ROUNDUP(datalen, 4);
+ } else {
+ sd_err(("Host is %d bit spid, could not create SPI command.\n",
+ 8 * sd->wordlen));
+ return ERROR;
+ }
+
+ /* for Write, put the data into the output buffer */
+ if (GFIELD(cmd_arg, SPI_RW_FLAG) == 1) {
+ /* We send len field of hw-header always a mod16 size, both from host and dongle */
+ if (DWORDMODE_ON) {
+ if (GFIELD(cmd_arg, SPI_FUNCTION) == SPI_FUNC_2) {
+ ptr = (uint16 *)&data[0];
+ templen = *ptr;
+ /* ASSERT(*ptr == ~*(ptr + 1)); */
+ templen = ROUNDUP(templen, 16);
+ *ptr = templen;
+ sd_trace(("actual tx len = %d\n", (uint16)(~*(ptr+1))));
+ }
+ }
+
+ if (datalen != 0) {
+ for (i = 0; i < datalen/4; i++) {
+ if (sd->wordlen == 4) { /* 32bit spid */
+ *(uint32 *)&spi_outbuf[i * 4 + CMDLEN] =
+ bcmswap32(data[i]);
+ } else if (sd->wordlen == 2) { /* 16bit spid */
+ *(uint16 *)&spi_outbuf[i * 4 + CMDLEN] =
+ bcmswap16(data[i] & 0xffff);
+ *(uint16 *)&spi_outbuf[i * 4 + CMDLEN + 2] =
+ bcmswap16((data[i] & 0xffff0000) >> 16);
+ }
+ }
+ }
+ }
+
+ /* Append resp-delay number of bytes and clock them out for F0/1/2 reads. */
+ if (GFIELD(cmd_arg, SPI_RW_FLAG) == 0) {
+ int func = GFIELD(cmd_arg, SPI_FUNCTION);
+ switch (func) {
+ case 0:
+ resp_delay = sd->resp_delay_all ? F0_RESPONSE_DELAY : 0;
+ break;
+ case 1:
+ resp_delay = F1_RESPONSE_DELAY;
+ break;
+ case 2:
+ resp_delay = sd->resp_delay_all ? F2_RESPONSE_DELAY : 0;
+ break;
+ default:
+ ASSERT(0);
+ break;
+ }
+ /* Program response delay */
+ bcmspi_prog_resp_delay(sd, func, resp_delay);
+ }
+
+ /* +4 for cmd and +4 for dstatus */
+ hostlen = datalen + 8 + resp_delay;
+ hostlen += dstatus_idx;
+ hostlen += (4 - (hostlen & 0x3));
+ spi_sendrecv(sd, spi_outbuf, spi_inbuf, hostlen);
+
+ /* for Read, get the data into the input buffer */
+ if (datalen != 0) {
+ if (GFIELD(cmd_arg, SPI_RW_FLAG) == 0) { /* if read cmd */
+ for (j = 0; j < datalen/4; j++) {
+ if (sd->wordlen == 4) { /* 32bit spid */
+ data[j] = bcmswap32(*(uint32 *)&spi_inbuf[j * 4 +
+ CMDLEN + resp_delay]);
+ } else if (sd->wordlen == 2) { /* 16bit spid */
+ data[j] = (bcmswap16(*(uint16 *)&spi_inbuf[j * 4 +
+ CMDLEN + resp_delay])) |
+ ((bcmswap16(*(uint16 *)&spi_inbuf[j * 4 +
+ CMDLEN + resp_delay + 2])) << 16);
+ }
+ }
+
+ if ((DWORDMODE_ON) && (GFIELD(cmd_arg, SPI_FUNCTION) == SPI_FUNC_2)) {
+ ptr = (uint16 *)&data[0];
+ templen = *ptr;
+ buslen = len = ~(*(ptr + 1));
+ buslen = ROUNDUP(buslen, 16);
+ /* populate actual len in hw-header */
+ if (templen == buslen)
+ *ptr = len;
+ }
+ }
+ }
+
+ /* Restore back the len field of the hw header */
+ if (DWORDMODE_ON) {
+ if ((GFIELD(cmd_arg, SPI_FUNCTION) == SPI_FUNC_2) &&
+ (GFIELD(cmd_arg, SPI_RW_FLAG) == 1)) {
+ ptr = (uint16 *)&data[0];
+ *ptr = (uint16)(~*(ptr+1));
+ }
+ }
+
+ dstatus_idx += (datalen + CMDLEN + resp_delay);
+ /* Last 4bytes are dstatus. Device is configured to return status bits. */
+ if (sd->wordlen == 4) { /* 32bit spid */
+ sd->card_dstatus = bcmswap32(*(uint32 *)&spi_inbuf[dstatus_idx]);
+ } else if (sd->wordlen == 2) { /* 16bit spid */
+ sd->card_dstatus = (bcmswap16(*(uint16 *)&spi_inbuf[dstatus_idx]) |
+ (bcmswap16(*(uint16 *)&spi_inbuf[dstatus_idx + 2]) << 16));
+ } else {
+ sd_err(("Host is %d bit machine, could not read SPI dstatus.\n",
+ 8 * sd->wordlen));
+ return ERROR;
+ }
+ if (sd->card_dstatus == 0xffffffff) {
+ sd_err(("looks like not a GSPI device or device is not powered.\n"));
+ }
+
+ err = bcmspi_update_stats(sd, cmd_arg);
+
+ return err;
+
+}
+
+static int
+bcmspi_card_buf(sdioh_info_t *sd, int rw, int func, bool fifo,
+ uint32 addr, int nbytes, uint32 *data)
+{
+ int status;
+ uint32 cmd_arg;
+ bool write = rw == SDIOH_READ ? 0 : 1;
+ uint retries = 0;
+
+ bool enable;
+ uint32 spilen;
+
+ cmd_arg = 0;
+
+ ASSERT(nbytes);
+ ASSERT(nbytes <= sd->client_block_size[func]);
+
+ if (write) sd->t_cnt++; else sd->r_cnt++;
+
+ if (func == 2) {
+ /* Frame len check limited by gSPI. */
+ if ((nbytes > 2000) && write) {
+ sd_trace((">2KB write: F2 wr of %d bytes\n", nbytes));
+ }
+ /* ASSERT(nbytes <= 2048); Fix bigger len gspi issue and uncomment. */
+ /* If F2 fifo on device is not ready to receive data, don't do F2 transfer */
+ if (write) {
+ uint32 dstatus;
+ /* check F2 ready with cached one */
+ bcmspi_cmd_getdstatus(sd, &dstatus);
+ if ((dstatus & STATUS_F2_RX_READY) == 0) {
+ retries = WAIT_F2RXFIFORDY;
+ enable = 0;
+ while (retries-- && !enable) {
+ OSL_DELAY(WAIT_F2RXFIFORDY_DELAY * 1000);
+ bcmspi_card_regread(sd, SPI_FUNC_0, SPID_STATUS_REG, 4,
+ &dstatus);
+ if (dstatus & STATUS_F2_RX_READY)
+ enable = TRUE;
+ }
+ if (!enable) {
+ struct spierrstats_t *spierrstats = &sd->spierrstats;
+ spierrstats->f2rxnotready++;
+ sd_err(("F2 FIFO is not ready to receive data.\n"));
+ return ERROR;
+ }
+ sd_trace(("No of retries on F2 ready %d\n",
+ (WAIT_F2RXFIFORDY - retries)));
+ }
+ }
+ }
+
+ /* F2 transfers happen on 0 addr */
+ addr = (func == 2) ? 0 : addr;
+
+ /* In pio mode buffer is read using fixed address fifo in func 1 */
+ if ((func == 1) && (fifo))
+ cmd_arg = SFIELD(cmd_arg, SPI_ACCESS, 0);
+ else
+ cmd_arg = SFIELD(cmd_arg, SPI_ACCESS, 1);
+
+ cmd_arg = SFIELD(cmd_arg, SPI_FUNCTION, func);
+ cmd_arg = SFIELD(cmd_arg, SPI_REG_ADDR, addr);
+ cmd_arg = SFIELD(cmd_arg, SPI_RW_FLAG, write);
+ spilen = sd->data_xfer_count = MIN(sd->client_block_size[func], nbytes);
+ if ((sd->dwordmode == TRUE) && (GFIELD(cmd_arg, SPI_FUNCTION) == SPI_FUNC_2)) {
+ /* convert len to mod4 size */
+ spilen = spilen + ((spilen & 0x3) ? (4 - (spilen & 0x3)): 0);
+ cmd_arg = SFIELD(cmd_arg, SPI_LEN, (spilen >> 2));
+ } else
+ cmd_arg = SFIELD(cmd_arg, SPI_LEN, spilen);
+
+ if ((func == 2) && (fifo == 1)) {
+ sd_data(("%s: %s func %d, %s, addr 0x%x, len %d bytes, r_cnt %d t_cnt %d\n",
+ __FUNCTION__, write ? "Wr" : "Rd", func, "INCR",
+ addr, nbytes, sd->r_cnt, sd->t_cnt));
+ }
+
+ sd_trace(("%s cmd_arg = 0x%x\n", __FUNCTION__, cmd_arg));
+ sd_data(("%s: %s func %d, %s, addr 0x%x, len %d bytes, r_cnt %d t_cnt %d\n",
+ __FUNCTION__, write ? "Wd" : "Rd", func, "INCR",
+ addr, nbytes, sd->r_cnt, sd->t_cnt));
+
+
+ if ((status = bcmspi_cmd_issue(sd, sd->sd_use_dma, cmd_arg,
+ data, nbytes)) != SUCCESS) {
+ sd_err(("%s: cmd_issue failed for %s\n", __FUNCTION__,
+ (write ? "write" : "read")));
+ return status;
+ }
+
+ /* gSPI expects that hw-header-len is equal to spi-command-len */
+ if ((func == 2) && (rw == SDIOH_WRITE) && (sd->dwordmode == FALSE)) {
+ ASSERT((uint16)sd->data_xfer_count == (uint16)(*data & 0xffff));
+ ASSERT((uint16)sd->data_xfer_count == (uint16)(~((*data & 0xffff0000) >> 16)));
+ }
+
+ if ((nbytes > 2000) && !write) {
+ sd_trace((">2KB read: F2 rd of %d bytes\n", nbytes));
+ }
+
+ return SUCCESS;
+}
+
+/* Reset and re-initialize the device */
+int
+sdioh_sdio_reset(sdioh_info_t *si)
+{
+ si->card_init_done = FALSE;
+ return bcmspi_client_init(si);
+}
diff --git a/drivers/net/wireless/bcm4329/bcmutils.c b/drivers/net/wireless/bcm4329/bcmutils.c
new file mode 100644
index 0000000..43c04ee
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmutils.c
@@ -0,0 +1,1838 @@
+/*
+ * Driver O/S-independent utility routines
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: bcmutils.c,v 1.210.4.5.2.4.6.19 2010/04/26 06:05:25 Exp $
+ */
+
+#include <typedefs.h>
+#include <bcmdefs.h>
+#include <stdarg.h>
+#include <bcmutils.h>
+#ifdef BCMDRIVER
+#include <osl.h>
+#include <siutils.h>
+#else
+#include <stdio.h>
+#include <string.h>
+/* This case for external supplicant use */
+#if defined(BCMEXTSUP)
+#include <bcm_osl.h>
+#endif
+
+#endif /* BCMDRIVER */
+#include <bcmendian.h>
+#include <bcmdevs.h>
+#include <proto/ethernet.h>
+#include <proto/vlan.h>
+#include <proto/bcmip.h>
+#include <proto/802.1d.h>
+#include <proto/802.11.h>
+
+
+#ifdef BCMDRIVER
+
+
+/* copy a pkt buffer chain into a buffer */
+uint
+pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf)
+{
+ uint n, ret = 0;
+
+ if (len < 0)
+ len = 4096; /* "infinite" */
+
+ /* skip 'offset' bytes */
+ for (; p && offset; p = PKTNEXT(osh, p)) {
+ if (offset < (uint)PKTLEN(osh, p))
+ break;
+ offset -= PKTLEN(osh, p);
+ }
+
+ if (!p)
+ return 0;
+
+ /* copy the data */
+ for (; p && len; p = PKTNEXT(osh, p)) {
+ n = MIN((uint)PKTLEN(osh, p) - offset, (uint)len);
+ bcopy(PKTDATA(osh, p) + offset, buf, n);
+ buf += n;
+ len -= n;
+ ret += n;
+ offset = 0;
+ }
+
+ return ret;
+}
+
+/* copy a buffer into a pkt buffer chain */
+uint
+pktfrombuf(osl_t *osh, void *p, uint offset, int len, uchar *buf)
+{
+ uint n, ret = 0;
+
+ /* skip 'offset' bytes */
+ for (; p && offset; p = PKTNEXT(osh, p)) {
+ if (offset < (uint)PKTLEN(osh, p))
+ break;
+ offset -= PKTLEN(osh, p);
+ }
+
+ if (!p)
+ return 0;
+
+ /* copy the data */
+ for (; p && len; p = PKTNEXT(osh, p)) {
+ n = MIN((uint)PKTLEN(osh, p) - offset, (uint)len);
+ bcopy(buf, PKTDATA(osh, p) + offset, n);
+ buf += n;
+ len -= n;
+ ret += n;
+ offset = 0;
+ }
+
+ return ret;
+}
+
+
+
+/* return total length of buffer chain */
+uint
+pkttotlen(osl_t *osh, void *p)
+{
+ uint total;
+
+ total = 0;
+ for (; p; p = PKTNEXT(osh, p))
+ total += PKTLEN(osh, p);
+ return (total);
+}
+
+/* return the last buffer of chained pkt */
+void *
+pktlast(osl_t *osh, void *p)
+{
+ for (; PKTNEXT(osh, p); p = PKTNEXT(osh, p))
+ ;
+
+ return (p);
+}
+
+/* count segments of a chained packet */
+uint
+pktsegcnt(osl_t *osh, void *p)
+{
+ uint cnt;
+
+ for (cnt = 0; p; p = PKTNEXT(osh, p))
+ cnt++;
+
+ return cnt;
+}
+
+
+/*
+ * osl multiple-precedence packet queue
+ * hi_prec is always >= the number of the highest non-empty precedence
+ */
+void *
+pktq_penq(struct pktq *pq, int prec, void *p)
+{
+ struct pktq_prec *q;
+
+ ASSERT(prec >= 0 && prec < pq->num_prec);
+ ASSERT(PKTLINK(p) == NULL); /* queueing chains not allowed */
+
+ ASSERT(!pktq_full(pq));
+ ASSERT(!pktq_pfull(pq, prec));
+
+ q = &pq->q[prec];
+
+ if (q->head)
+ PKTSETLINK(q->tail, p);
+ else
+ q->head = p;
+
+ q->tail = p;
+ q->len++;
+
+ pq->len++;
+
+ if (pq->hi_prec < prec)
+ pq->hi_prec = (uint8)prec;
+
+ return p;
+}
+
+void *
+pktq_penq_head(struct pktq *pq, int prec, void *p)
+{
+ struct pktq_prec *q;
+
+ ASSERT(prec >= 0 && prec < pq->num_prec);
+ ASSERT(PKTLINK(p) == NULL); /* queueing chains not allowed */
+
+ ASSERT(!pktq_full(pq));
+ ASSERT(!pktq_pfull(pq, prec));
+
+ q = &pq->q[prec];
+
+ if (q->head == NULL)
+ q->tail = p;
+
+ PKTSETLINK(p, q->head);
+ q->head = p;
+ q->len++;
+
+ pq->len++;
+
+ if (pq->hi_prec < prec)
+ pq->hi_prec = (uint8)prec;
+
+ return p;
+}
+
+void *
+pktq_pdeq(struct pktq *pq, int prec)
+{
+ struct pktq_prec *q;
+ void *p;
+
+ ASSERT(prec >= 0 && prec < pq->num_prec);
+
+ q = &pq->q[prec];
+
+ if ((p = q->head) == NULL)
+ return NULL;
+
+ if ((q->head = PKTLINK(p)) == NULL)
+ q->tail = NULL;
+
+ q->len--;
+
+ pq->len--;
+
+ PKTSETLINK(p, NULL);
+
+ return p;
+}
+
+void *
+pktq_pdeq_tail(struct pktq *pq, int prec)
+{
+ struct pktq_prec *q;
+ void *p, *prev;
+
+ ASSERT(prec >= 0 && prec < pq->num_prec);
+
+ q = &pq->q[prec];
+
+ if ((p = q->head) == NULL)
+ return NULL;
+
+ for (prev = NULL; p != q->tail; p = PKTLINK(p))
+ prev = p;
+
+ if (prev)
+ PKTSETLINK(prev, NULL);
+ else
+ q->head = NULL;
+
+ q->tail = prev;
+ q->len--;
+
+ pq->len--;
+
+ return p;
+}
+
+void
+pktq_pflush(osl_t *osh, struct pktq *pq, int prec, bool dir)
+{
+ struct pktq_prec *q;
+ void *p;
+
+ q = &pq->q[prec];
+ p = q->head;
+ while (p) {
+ q->head = PKTLINK(p);
+ PKTSETLINK(p, NULL);
+ PKTFREE(osh, p, dir);
+ q->len--;
+ pq->len--;
+ p = q->head;
+ }
+ ASSERT(q->len == 0);
+ q->tail = NULL;
+}
+
+bool
+pktq_pdel(struct pktq *pq, void *pktbuf, int prec)
+{
+ struct pktq_prec *q;
+ void *p;
+
+ ASSERT(prec >= 0 && prec < pq->num_prec);
+
+ if (!pktbuf)
+ return FALSE;
+
+ q = &pq->q[prec];
+
+ if (q->head == pktbuf) {
+ if ((q->head = PKTLINK(pktbuf)) == NULL)
+ q->tail = NULL;
+ } else {
+ for (p = q->head; p && PKTLINK(p) != pktbuf; p = PKTLINK(p))
+ ;
+ if (p == NULL)
+ return FALSE;
+
+ PKTSETLINK(p, PKTLINK(pktbuf));
+ if (q->tail == pktbuf)
+ q->tail = p;
+ }
+
+ q->len--;
+ pq->len--;
+ PKTSETLINK(pktbuf, NULL);
+ return TRUE;
+}
+
+void
+pktq_init(struct pktq *pq, int num_prec, int max_len)
+{
+ int prec;
+
+ ASSERT(num_prec > 0 && num_prec <= PKTQ_MAX_PREC);
+
+ /* pq is variable size; only zero out what's requested */
+ bzero(pq, OFFSETOF(struct pktq, q) + (sizeof(struct pktq_prec) * num_prec));
+
+ pq->num_prec = (uint16)num_prec;
+
+ pq->max = (uint16)max_len;
+
+ for (prec = 0; prec < num_prec; prec++)
+ pq->q[prec].max = pq->max;
+}
+
+void *
+pktq_deq(struct pktq *pq, int *prec_out)
+{
+ struct pktq_prec *q;
+ void *p;
+ int prec;
+
+ if (pq->len == 0)
+ return NULL;
+
+ while ((prec = pq->hi_prec) > 0 && pq->q[prec].head == NULL)
+ pq->hi_prec--;
+
+ q = &pq->q[prec];
+
+ if ((p = q->head) == NULL)
+ return NULL;
+
+ if ((q->head = PKTLINK(p)) == NULL)
+ q->tail = NULL;
+
+ q->len--;
+
+ pq->len--;
+
+ if (prec_out)
+ *prec_out = prec;
+
+ PKTSETLINK(p, NULL);
+
+ return p;
+}
+
+void *
+pktq_deq_tail(struct pktq *pq, int *prec_out)
+{
+ struct pktq_prec *q;
+ void *p, *prev;
+ int prec;
+
+ if (pq->len == 0)
+ return NULL;
+
+ for (prec = 0; prec < pq->hi_prec; prec++)
+ if (pq->q[prec].head)
+ break;
+
+ q = &pq->q[prec];
+
+ if ((p = q->head) == NULL)
+ return NULL;
+
+ for (prev = NULL; p != q->tail; p = PKTLINK(p))
+ prev = p;
+
+ if (prev)
+ PKTSETLINK(prev, NULL);
+ else
+ q->head = NULL;
+
+ q->tail = prev;
+ q->len--;
+
+ pq->len--;
+
+ if (prec_out)
+ *prec_out = prec;
+
+ PKTSETLINK(p, NULL);
+
+ return p;
+}
+
+void *
+pktq_peek(struct pktq *pq, int *prec_out)
+{
+ int prec;
+
+ if (pq->len == 0)
+ return NULL;
+
+ while ((prec = pq->hi_prec) > 0 && pq->q[prec].head == NULL)
+ pq->hi_prec--;
+
+ if (prec_out)
+ *prec_out = prec;
+
+ return (pq->q[prec].head);
+}
+
+void *
+pktq_peek_tail(struct pktq *pq, int *prec_out)
+{
+ int prec;
+
+ if (pq->len == 0)
+ return NULL;
+
+ for (prec = 0; prec < pq->hi_prec; prec++)
+ if (pq->q[prec].head)
+ break;
+
+ if (prec_out)
+ *prec_out = prec;
+
+ return (pq->q[prec].tail);
+}
+
+void
+pktq_flush(osl_t *osh, struct pktq *pq, bool dir)
+{
+ int prec;
+ for (prec = 0; prec < pq->num_prec; prec++)
+ pktq_pflush(osh, pq, prec, dir);
+ ASSERT(pq->len == 0);
+}
+
+/* Return sum of lengths of a specific set of precedences */
+int
+pktq_mlen(struct pktq *pq, uint prec_bmp)
+{
+ int prec, len;
+
+ len = 0;
+
+ for (prec = 0; prec <= pq->hi_prec; prec++)
+ if (prec_bmp & (1 << prec))
+ len += pq->q[prec].len;
+
+ return len;
+}
+
+/* Priority dequeue from a specific set of precedences */
+void *
+pktq_mdeq(struct pktq *pq, uint prec_bmp, int *prec_out)
+{
+ struct pktq_prec *q;
+ void *p;
+ int prec;
+
+ if (pq->len == 0)
+ return NULL;
+
+ while ((prec = pq->hi_prec) > 0 && pq->q[prec].head == NULL)
+ pq->hi_prec--;
+
+ while ((prec_bmp & (1 << prec)) == 0 || pq->q[prec].head == NULL)
+ if (prec-- == 0)
+ return NULL;
+
+ q = &pq->q[prec];
+
+ if ((p = q->head) == NULL)
+ return NULL;
+
+ if ((q->head = PKTLINK(p)) == NULL)
+ q->tail = NULL;
+
+ q->len--;
+
+ if (prec_out)
+ *prec_out = prec;
+
+ pq->len--;
+
+ PKTSETLINK(p, NULL);
+
+ return p;
+}
+#endif /* BCMDRIVER */
+
+
+
+const unsigned char bcm_ctype[] = {
+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 0-7 */
+ _BCM_C, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C|_BCM_S, _BCM_C,
+ _BCM_C, /* 8-15 */
+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 16-23 */
+ _BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C, /* 24-31 */
+ _BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 32-39 */
+ _BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 40-47 */
+ _BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D, /* 48-55 */
+ _BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 56-63 */
+ _BCM_P, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X, _BCM_U|_BCM_X,
+ _BCM_U|_BCM_X, _BCM_U, /* 64-71 */
+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 72-79 */
+ _BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U, /* 80-87 */
+ _BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P, /* 88-95 */
+ _BCM_P, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X, _BCM_L|_BCM_X,
+ _BCM_L|_BCM_X, _BCM_L, /* 96-103 */
+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 104-111 */
+ _BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L, /* 112-119 */
+ _BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C, /* 120-127 */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 128-143 */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 144-159 */
+ _BCM_S|_BCM_SP, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P,
+ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, /* 160-175 */
+ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P,
+ _BCM_P, _BCM_P, _BCM_P, _BCM_P, _BCM_P, /* 176-191 */
+ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U,
+ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, /* 192-207 */
+ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_P, _BCM_U, _BCM_U, _BCM_U,
+ _BCM_U, _BCM_U, _BCM_U, _BCM_U, _BCM_L, /* 208-223 */
+ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L,
+ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, /* 224-239 */
+ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_P, _BCM_L, _BCM_L, _BCM_L,
+ _BCM_L, _BCM_L, _BCM_L, _BCM_L, _BCM_L /* 240-255 */
+};
+
+ulong
+bcm_strtoul(char *cp, char **endp, uint base)
+{
+ ulong result, last_result = 0, value;
+ bool minus;
+
+ minus = FALSE;
+
+ while (bcm_isspace(*cp))
+ cp++;
+
+ if (cp[0] == '+')
+ cp++;
+ else if (cp[0] == '-') {
+ minus = TRUE;
+ cp++;
+ }
+
+ if (base == 0) {
+ if (cp[0] == '0') {
+ if ((cp[1] == 'x') || (cp[1] == 'X')) {
+ base = 16;
+ cp = &cp[2];
+ } else {
+ base = 8;
+ cp = &cp[1];
+ }
+ } else
+ base = 10;
+ } else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
+ cp = &cp[2];
+ }
+
+ result = 0;
+
+ while (bcm_isxdigit(*cp) &&
+ (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
+ result = result*base + value;
+ /* Detected overflow */
+ if (result < last_result && !minus)
+ return (ulong)-1;
+ last_result = result;
+ cp++;
+ }
+
+ if (minus)
+ result = (ulong)(-(long)result);
+
+ if (endp)
+ *endp = (char *)cp;
+
+ return (result);
+}
+
+int
+bcm_atoi(char *s)
+{
+ return (int)bcm_strtoul(s, NULL, 10);
+}
+
+/* return pointer to location of substring 'needle' in 'haystack' */
+char*
+bcmstrstr(char *haystack, char *needle)
+{
+ int len, nlen;
+ int i;
+
+ if ((haystack == NULL) || (needle == NULL))
+ return (haystack);
+
+ nlen = strlen(needle);
+ len = strlen(haystack) - nlen + 1;
+
+ for (i = 0; i < len; i++)
+ if (memcmp(needle, &haystack[i], nlen) == 0)
+ return (&haystack[i]);
+ return (NULL);
+}
+
+char*
+bcmstrcat(char *dest, const char *src)
+{
+ char *p;
+
+ p = dest + strlen(dest);
+
+ while ((*p++ = *src++) != '\0')
+ ;
+
+ return (dest);
+}
+
+char*
+bcmstrncat(char *dest, const char *src, uint size)
+{
+ char *endp;
+ char *p;
+
+ p = dest + strlen(dest);
+ endp = p + size;
+
+ while (p != endp && (*p++ = *src++) != '\0')
+ ;
+
+ return (dest);
+}
+
+
+/****************************************************************************
+* Function: bcmstrtok
+*
+* Purpose:
+* Tokenizes a string. This function is conceptually similiar to ANSI C strtok(),
+* but allows strToken() to be used by different strings or callers at the same
+* time. Each call modifies '*string' by substituting a NULL character for the
+* first delimiter that is encountered, and updates 'string' to point to the char
+* after the delimiter. Leading delimiters are skipped.
+*
+* Parameters:
+* string (mod) Ptr to string ptr, updated by token.
+* delimiters (in) Set of delimiter characters.
+* tokdelim (out) Character that delimits the returned token. (May
+* be set to NULL if token delimiter is not required).
+*
+* Returns: Pointer to the next token found. NULL when no more tokens are found.
+*****************************************************************************
+*/
+char *
+bcmstrtok(char **string, const char *delimiters, char *tokdelim)
+{
+ unsigned char *str;
+ unsigned long map[8];
+ int count;
+ char *nextoken;
+
+ if (tokdelim != NULL) {
+ /* Prime the token delimiter */
+ *tokdelim = '\0';
+ }
+
+ /* Clear control map */
+ for (count = 0; count < 8; count++) {
+ map[count] = 0;
+ }
+
+ /* Set bits in delimiter table */
+ do {
+ map[*delimiters >> 5] |= (1 << (*delimiters & 31));
+ }
+ while (*delimiters++);
+
+ str = (unsigned char*)*string;
+
+ /* Find beginning of token (skip over leading delimiters). Note that
+ * there is no token iff this loop sets str to point to the terminal
+ * null (*str == '\0')
+ */
+ while (((map[*str >> 5] & (1 << (*str & 31))) && *str) || (*str == ' ')) {
+ str++;
+ }
+
+ nextoken = (char*)str;
+
+ /* Find the end of the token. If it is not the end of the string,
+ * put a null there.
+ */
+ for (; *str; str++) {
+ if (map[*str >> 5] & (1 << (*str & 31))) {
+ if (tokdelim != NULL) {
+ *tokdelim = *str;
+ }
+
+ *str++ = '\0';
+ break;
+ }
+ }
+
+ *string = (char*)str;
+
+ /* Determine if a token has been found. */
+ if (nextoken == (char *) str) {
+ return NULL;
+ }
+ else {
+ return nextoken;
+ }
+}
+
+
+#define xToLower(C) \
+ ((C >= 'A' && C <= 'Z') ? (char)((int)C - (int)'A' + (int)'a') : C)
+
+
+/****************************************************************************
+* Function: bcmstricmp
+*
+* Purpose: Compare to strings case insensitively.
+*
+* Parameters: s1 (in) First string to compare.
+* s2 (in) Second string to compare.
+*
+* Returns: Return 0 if the two strings are equal, -1 if t1 < t2 and 1 if
+* t1 > t2, when ignoring case sensitivity.
+*****************************************************************************
+*/
+int
+bcmstricmp(const char *s1, const char *s2)
+{
+ char dc, sc;
+
+ while (*s2 && *s1) {
+ dc = xToLower(*s1);
+ sc = xToLower(*s2);
+ if (dc < sc) return -1;
+ if (dc > sc) return 1;
+ s1++;
+ s2++;
+ }
+
+ if (*s1 && !*s2) return 1;
+ if (!*s1 && *s2) return -1;
+ return 0;
+}
+
+
+/****************************************************************************
+* Function: bcmstrnicmp
+*
+* Purpose: Compare to strings case insensitively, upto a max of 'cnt'
+* characters.
+*
+* Parameters: s1 (in) First string to compare.
+* s2 (in) Second string to compare.
+* cnt (in) Max characters to compare.
+*
+* Returns: Return 0 if the two strings are equal, -1 if t1 < t2 and 1 if
+* t1 > t2, when ignoring case sensitivity.
+*****************************************************************************
+*/
+int
+bcmstrnicmp(const char* s1, const char* s2, int cnt)
+{
+ char dc, sc;
+
+ while (*s2 && *s1 && cnt) {
+ dc = xToLower(*s1);
+ sc = xToLower(*s2);
+ if (dc < sc) return -1;
+ if (dc > sc) return 1;
+ s1++;
+ s2++;
+ cnt--;
+ }
+
+ if (!cnt) return 0;
+ if (*s1 && !*s2) return 1;
+ if (!*s1 && *s2) return -1;
+ return 0;
+}
+
+/* parse a xx:xx:xx:xx:xx:xx format ethernet address */
+int
+bcm_ether_atoe(char *p, struct ether_addr *ea)
+{
+ int i = 0;
+
+ for (;;) {
+ ea->octet[i++] = (char) bcm_strtoul(p, &p, 16);
+ if (!*p++ || i == 6)
+ break;
+ }
+
+ return (i == 6);
+}
+
+
+#if defined(CONFIG_USBRNDIS_RETAIL) || defined(NDIS_MINIPORT_DRIVER)
+/* registry routine buffer preparation utility functions:
+ * parameter order is like strncpy, but returns count
+ * of bytes copied. Minimum bytes copied is null char(1)/wchar(2)
+ */
+ulong
+wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen)
+{
+ ulong copyct = 1;
+ ushort i;
+
+ if (abuflen == 0)
+ return 0;
+
+ /* wbuflen is in bytes */
+ wbuflen /= sizeof(ushort);
+
+ for (i = 0; i < wbuflen; ++i) {
+ if (--abuflen == 0)
+ break;
+ *abuf++ = (char) *wbuf++;
+ ++copyct;
+ }
+ *abuf = '\0';
+
+ return copyct;
+}
+#endif /* CONFIG_USBRNDIS_RETAIL || NDIS_MINIPORT_DRIVER */
+
+char *
+bcm_ether_ntoa(const struct ether_addr *ea, char *buf)
+{
+ static const char template[] = "%02x:%02x:%02x:%02x:%02x:%02x";
+ snprintf(buf, 18, template,
+ ea->octet[0]&0xff, ea->octet[1]&0xff, ea->octet[2]&0xff,
+ ea->octet[3]&0xff, ea->octet[4]&0xff, ea->octet[5]&0xff);
+ return (buf);
+}
+
+char *
+bcm_ip_ntoa(struct ipv4_addr *ia, char *buf)
+{
+ snprintf(buf, 16, "%d.%d.%d.%d",
+ ia->addr[0], ia->addr[1], ia->addr[2], ia->addr[3]);
+ return (buf);
+}
+
+#ifdef BCMDRIVER
+
+void
+bcm_mdelay(uint ms)
+{
+ uint i;
+
+ for (i = 0; i < ms; i++) {
+ OSL_DELAY(1000);
+ }
+}
+
+
+
+
+
+
+#if defined(DHD_DEBUG)
+/* pretty hex print a pkt buffer chain */
+void
+prpkt(const char *msg, osl_t *osh, void *p0)
+{
+ void *p;
+
+ if (msg && (msg[0] != '\0'))
+ printf("%s:\n", msg);
+
+ for (p = p0; p; p = PKTNEXT(osh, p))
+ prhex(NULL, PKTDATA(osh, p), PKTLEN(osh, p));
+}
+#endif
+
+/* Takes an Ethernet frame and sets out-of-bound PKTPRIO.
+ * Also updates the inplace vlan tag if requested.
+ * For debugging, it returns an indication of what it did.
+ */
+uint
+pktsetprio(void *pkt, bool update_vtag)
+{
+ struct ether_header *eh;
+ struct ethervlan_header *evh;
+ uint8 *pktdata;
+ int priority = 0;
+ int rc = 0;
+
+ pktdata = (uint8 *) PKTDATA(NULL, pkt);
+ ASSERT(ISALIGNED((uintptr)pktdata, sizeof(uint16)));
+
+ eh = (struct ether_header *) pktdata;
+
+ if (ntoh16(eh->ether_type) == ETHER_TYPE_8021Q) {
+ uint16 vlan_tag;
+ int vlan_prio, dscp_prio = 0;
+
+ evh = (struct ethervlan_header *)eh;
+
+ vlan_tag = ntoh16(evh->vlan_tag);
+ vlan_prio = (int) (vlan_tag >> VLAN_PRI_SHIFT) & VLAN_PRI_MASK;
+
+ if (ntoh16(evh->ether_type) == ETHER_TYPE_IP) {
+ uint8 *ip_body = pktdata + sizeof(struct ethervlan_header);
+ uint8 tos_tc = IP_TOS(ip_body);
+ dscp_prio = (int)(tos_tc >> IPV4_TOS_PREC_SHIFT);
+ }
+
+ /* DSCP priority gets precedence over 802.1P (vlan tag) */
+ if (dscp_prio != 0) {
+ priority = dscp_prio;
+ rc |= PKTPRIO_VDSCP;
+ } else {
+ priority = vlan_prio;
+ rc |= PKTPRIO_VLAN;
+ }
+ /*
+ * If the DSCP priority is not the same as the VLAN priority,
+ * then overwrite the priority field in the vlan tag, with the
+ * DSCP priority value. This is required for Linux APs because
+ * the VLAN driver on Linux, overwrites the skb->priority field
+ * with the priority value in the vlan tag
+ */
+ if (update_vtag && (priority != vlan_prio)) {
+ vlan_tag &= ~(VLAN_PRI_MASK << VLAN_PRI_SHIFT);
+ vlan_tag |= (uint16)priority << VLAN_PRI_SHIFT;
+ evh->vlan_tag = hton16(vlan_tag);
+ rc |= PKTPRIO_UPD;
+ }
+ } else if (ntoh16(eh->ether_type) == ETHER_TYPE_IP) {
+ uint8 *ip_body = pktdata + sizeof(struct ether_header);
+ uint8 tos_tc = IP_TOS(ip_body);
+ priority = (int)(tos_tc >> IPV4_TOS_PREC_SHIFT);
+ rc |= PKTPRIO_DSCP;
+ }
+
+ ASSERT(priority >= 0 && priority <= MAXPRIO);
+ PKTSETPRIO(pkt, priority);
+ return (rc | priority);
+}
+
+static char bcm_undeferrstr[BCME_STRLEN];
+
+static const char *bcmerrorstrtable[] = BCMERRSTRINGTABLE;
+
+/* Convert the error codes into related error strings */
+const char *
+bcmerrorstr(int bcmerror)
+{
+ /* check if someone added a bcmerror code but forgot to add errorstring */
+ ASSERT(ABS(BCME_LAST) == (ARRAYSIZE(bcmerrorstrtable) - 1));
+
+ if (bcmerror > 0 || bcmerror < BCME_LAST) {
+ snprintf(bcm_undeferrstr, BCME_STRLEN, "Undefined error %d", bcmerror);
+ return bcm_undeferrstr;
+ }
+
+ ASSERT(strlen(bcmerrorstrtable[-bcmerror]) < BCME_STRLEN);
+
+ return bcmerrorstrtable[-bcmerror];
+}
+
+
+
+/* iovar table lookup */
+const bcm_iovar_t*
+bcm_iovar_lookup(const bcm_iovar_t *table, const char *name)
+{
+ const bcm_iovar_t *vi;
+ const char *lookup_name;
+
+ /* skip any ':' delimited option prefixes */
+ lookup_name = strrchr(name, ':');
+ if (lookup_name != NULL)
+ lookup_name++;
+ else
+ lookup_name = name;
+
+ ASSERT(table != NULL);
+
+ for (vi = table; vi->name; vi++) {
+ if (!strcmp(vi->name, lookup_name))
+ return vi;
+ }
+ /* ran to end of table */
+
+ return NULL; /* var name not found */
+}
+
+int
+bcm_iovar_lencheck(const bcm_iovar_t *vi, void *arg, int len, bool set)
+{
+ int bcmerror = 0;
+
+ /* length check on io buf */
+ switch (vi->type) {
+ case IOVT_BOOL:
+ case IOVT_INT8:
+ case IOVT_INT16:
+ case IOVT_INT32:
+ case IOVT_UINT8:
+ case IOVT_UINT16:
+ case IOVT_UINT32:
+ /* all integers are int32 sized args at the ioctl interface */
+ if (len < (int)sizeof(int)) {
+ bcmerror = BCME_BUFTOOSHORT;
+ }
+ break;
+
+ case IOVT_BUFFER:
+ /* buffer must meet minimum length requirement */
+ if (len < vi->minlen) {
+ bcmerror = BCME_BUFTOOSHORT;
+ }
+ break;
+
+ case IOVT_VOID:
+ if (!set) {
+ /* Cannot return nil... */
+ bcmerror = BCME_UNSUPPORTED;
+ } else if (len) {
+ /* Set is an action w/o parameters */
+ bcmerror = BCME_BUFTOOLONG;
+ }
+ break;
+
+ default:
+ /* unknown type for length check in iovar info */
+ ASSERT(0);
+ bcmerror = BCME_UNSUPPORTED;
+ }
+
+ return bcmerror;
+}
+
+#endif /* BCMDRIVER */
+
+/*******************************************************************************
+ * crc8
+ *
+ * Computes a crc8 over the input data using the polynomial:
+ *
+ * x^8 + x^7 +x^6 + x^4 + x^2 + 1
+ *
+ * The caller provides the initial value (either CRC8_INIT_VALUE
+ * or the previous returned value) to allow for processing of
+ * discontiguous blocks of data. When generating the CRC the
+ * caller is responsible for complementing the final return value
+ * and inserting it into the byte stream. When checking, a final
+ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
+ *
+ * Reference: Dallas Semiconductor Application Note 27
+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
+ *
+ * ****************************************************************************
+ */
+
+STATIC const uint8 crc8_table[256] = {
+ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
+ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
+ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
+ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
+ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
+ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
+ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
+ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
+ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
+ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
+ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
+ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
+ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
+ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
+ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
+ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
+ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
+ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
+ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
+ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
+ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
+ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
+ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
+ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
+ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
+ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
+ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
+ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
+ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
+ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
+ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
+ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
+};
+
+#define CRC_INNER_LOOP(n, c, x) \
+ (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
+
+uint8
+hndcrc8(
+ uint8 *pdata, /* pointer to array of data to process */
+ uint nbytes, /* number of input data bytes to process */
+ uint8 crc /* either CRC8_INIT_VALUE or previous return value */
+)
+{
+ /* hard code the crc loop instead of using CRC_INNER_LOOP macro
+ * to avoid the undefined and unnecessary (uint8 >> 8) operation.
+ */
+ while (nbytes-- > 0)
+ crc = crc8_table[(crc ^ *pdata++) & 0xff];
+
+ return crc;
+}
+
+/*******************************************************************************
+ * crc16
+ *
+ * Computes a crc16 over the input data using the polynomial:
+ *
+ * x^16 + x^12 +x^5 + 1
+ *
+ * The caller provides the initial value (either CRC16_INIT_VALUE
+ * or the previous returned value) to allow for processing of
+ * discontiguous blocks of data. When generating the CRC the
+ * caller is responsible for complementing the final return value
+ * and inserting it into the byte stream. When checking, a final
+ * return value of CRC16_GOOD_VALUE indicates a valid CRC.
+ *
+ * Reference: Dallas Semiconductor Application Note 27
+ * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
+ * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
+ * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
+ *
+ * ****************************************************************************
+ */
+
+static const uint16 crc16_table[256] = {
+ 0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
+ 0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
+ 0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
+ 0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
+ 0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
+ 0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
+ 0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
+ 0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
+ 0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
+ 0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
+ 0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
+ 0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
+ 0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
+ 0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
+ 0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
+ 0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
+ 0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
+ 0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
+ 0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
+ 0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
+ 0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
+ 0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
+ 0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
+ 0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
+ 0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
+ 0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
+ 0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
+ 0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
+ 0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
+ 0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
+ 0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
+ 0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
+};
+
+uint16
+hndcrc16(
+ uint8 *pdata, /* pointer to array of data to process */
+ uint nbytes, /* number of input data bytes to process */
+ uint16 crc /* either CRC16_INIT_VALUE or previous return value */
+)
+{
+ while (nbytes-- > 0)
+ CRC_INNER_LOOP(16, crc, *pdata++);
+ return crc;
+}
+
+STATIC const uint32 crc32_table[256] = {
+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
+};
+
+uint32
+hndcrc32(
+ uint8 *pdata, /* pointer to array of data to process */
+ uint nbytes, /* number of input data bytes to process */
+ uint32 crc /* either CRC32_INIT_VALUE or previous return value */
+)
+{
+ uint8 *pend;
+#ifdef __mips__
+ uint8 tmp[4];
+ ulong *tptr = (ulong *)tmp;
+
+ /* in case the beginning of the buffer isn't aligned */
+ pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc);
+ nbytes -= (pend - pdata);
+ while (pdata < pend)
+ CRC_INNER_LOOP(32, crc, *pdata++);
+
+ /* handle bulk of data as 32-bit words */
+ pend = pdata + (nbytes & 0xfffffffc);
+ while (pdata < pend) {
+ *tptr = *(ulong *)pdata;
+ pdata += sizeof(ulong *);
+ CRC_INNER_LOOP(32, crc, tmp[0]);
+ CRC_INNER_LOOP(32, crc, tmp[1]);
+ CRC_INNER_LOOP(32, crc, tmp[2]);
+ CRC_INNER_LOOP(32, crc, tmp[3]);
+ }
+
+ /* 1-3 bytes at end of buffer */
+ pend = pdata + (nbytes & 0x03);
+ while (pdata < pend)
+ CRC_INNER_LOOP(32, crc, *pdata++);
+#else
+ pend = pdata + nbytes;
+ while (pdata < pend)
+ CRC_INNER_LOOP(32, crc, *pdata++);
+#endif /* __mips__ */
+
+ return crc;
+}
+
+#ifdef notdef
+#define CLEN 1499 /* CRC Length */
+#define CBUFSIZ (CLEN+4)
+#define CNBUFS 5 /* # of bufs */
+
+void testcrc32(void)
+{
+ uint j, k, l;
+ uint8 *buf;
+ uint len[CNBUFS];
+ uint32 crcr;
+ uint32 crc32tv[CNBUFS] =
+ {0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110};
+
+ ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL);
+
+ /* step through all possible alignments */
+ for (l = 0; l <= 4; l++) {
+ for (j = 0; j < CNBUFS; j++) {
+ len[j] = CLEN;
+ for (k = 0; k < len[j]; k++)
+ *(buf + j*CBUFSIZ + (k+l)) = (j+k) & 0xff;
+ }
+
+ for (j = 0; j < CNBUFS; j++) {
+ crcr = crc32(buf + j*CBUFSIZ + l, len[j], CRC32_INIT_VALUE);
+ ASSERT(crcr == crc32tv[j]);
+ }
+ }
+
+ MFREE(buf, CBUFSIZ*CNBUFS);
+ return;
+}
+#endif /* notdef */
+
+/*
+ * Advance from the current 1-byte tag/1-byte length/variable-length value
+ * triple, to the next, returning a pointer to the next.
+ * If the current or next TLV is invalid (does not fit in given buffer length),
+ * NULL is returned.
+ * *buflen is not modified if the TLV elt parameter is invalid, or is decremented
+ * by the TLV parameter's length if it is valid.
+ */
+bcm_tlv_t *
+bcm_next_tlv(bcm_tlv_t *elt, int *buflen)
+{
+ int len;
+
+ /* validate current elt */
+ if (!bcm_valid_tlv(elt, *buflen))
+ return NULL;
+
+ /* advance to next elt */
+ len = elt->len;
+ elt = (bcm_tlv_t*)(elt->data + len);
+ *buflen -= (2 + len);
+
+ /* validate next elt */
+ if (!bcm_valid_tlv(elt, *buflen))
+ return NULL;
+
+ return elt;
+}
+
+/*
+ * Traverse a string of 1-byte tag/1-byte length/variable-length value
+ * triples, returning a pointer to the substring whose first element
+ * matches tag
+ */
+bcm_tlv_t *
+bcm_parse_tlvs(void *buf, int buflen, uint key)
+{
+ bcm_tlv_t *elt;
+ int totlen;
+
+ elt = (bcm_tlv_t*)buf;
+ totlen = buflen;
+
+ /* find tagged parameter */
+ while (totlen >= 2) {
+ int len = elt->len;
+
+ /* validate remaining totlen */
+ if ((elt->id == key) && (totlen >= (len + 2)))
+ return (elt);
+
+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
+ totlen -= (len + 2);
+ }
+
+ return NULL;
+}
+
+/*
+ * Traverse a string of 1-byte tag/1-byte length/variable-length value
+ * triples, returning a pointer to the substring whose first element
+ * matches tag. Stop parsing when we see an element whose ID is greater
+ * than the target key.
+ */
+bcm_tlv_t *
+bcm_parse_ordered_tlvs(void *buf, int buflen, uint key)
+{
+ bcm_tlv_t *elt;
+ int totlen;
+
+ elt = (bcm_tlv_t*)buf;
+ totlen = buflen;
+
+ /* find tagged parameter */
+ while (totlen >= 2) {
+ uint id = elt->id;
+ int len = elt->len;
+
+ /* Punt if we start seeing IDs > than target key */
+ if (id > key)
+ return (NULL);
+
+ /* validate remaining totlen */
+ if ((id == key) && (totlen >= (len + 2)))
+ return (elt);
+
+ elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
+ totlen -= (len + 2);
+ }
+ return NULL;
+}
+
+#if defined(WLMSG_PRHDRS) || defined(WLMSG_PRPKT) || defined(WLMSG_ASSOC) || \
+ defined(DHD_DEBUG)
+int
+bcm_format_flags(const bcm_bit_desc_t *bd, uint32 flags, char* buf, int len)
+{
+ int i;
+ char* p = buf;
+ char hexstr[16];
+ int slen = 0;
+ uint32 bit;
+ const char* name;
+
+ if (len < 2 || !buf)
+ return 0;
+
+ buf[0] = '\0';
+ len -= 1;
+
+ for (i = 0; flags != 0; i++) {
+ bit = bd[i].bit;
+ name = bd[i].name;
+ if (bit == 0 && flags) {
+ /* print any unnamed bits */
+ sprintf(hexstr, "0x%X", flags);
+ name = hexstr;
+ flags = 0; /* exit loop */
+ } else if ((flags & bit) == 0)
+ continue;
+ slen += strlen(name);
+ if (len < slen)
+ break;
+ if (p != buf) p += sprintf(p, " "); /* btwn flag space */
+ strcat(p, name);
+ p += strlen(name);
+ flags &= ~bit;
+ len -= slen;
+ slen = 1; /* account for btwn flag space */
+ }
+
+ /* indicate the str was too short */
+ if (flags != 0) {
+ if (len == 0)
+ p--; /* overwrite last char */
+ p += sprintf(p, ">");
+ }
+
+ return (int)(p - buf);
+}
+
+/* print bytes formatted as hex to a string. return the resulting string length */
+int
+bcm_format_hex(char *str, const void *bytes, int len)
+{
+ int i;
+ char *p = str;
+ const uint8 *src = (const uint8*)bytes;
+
+ for (i = 0; i < len; i++) {
+ p += sprintf(p, "%02X", *src);
+ src++;
+ }
+ return (int)(p - str);
+}
+
+/* pretty hex print a contiguous buffer */
+void
+prhex(const char *msg, uchar *buf, uint nbytes)
+{
+ char line[128], *p;
+ uint i;
+
+ if (msg && (msg[0] != '\0'))
+ printf("%s:\n", msg);
+
+ p = line;
+ for (i = 0; i < nbytes; i++) {
+ if (i % 16 == 0) {
+ p += sprintf(p, " %04d: ", i); /* line prefix */
+ }
+ p += sprintf(p, "%02x ", buf[i]);
+ if (i % 16 == 15) {
+ printf("%s\n", line); /* flush line */
+ p = line;
+ }
+ }
+
+ /* flush last partial line */
+ if (p != line)
+ printf("%s\n", line);
+}
+#endif
+
+
+/* Produce a human-readable string for boardrev */
+char *
+bcm_brev_str(uint32 brev, char *buf)
+{
+ if (brev < 0x100)
+ snprintf(buf, 8, "%d.%d", (brev & 0xf0) >> 4, brev & 0xf);
+ else
+ snprintf(buf, 8, "%c%03x", ((brev & 0xf000) == 0x1000) ? 'P' : 'A', brev & 0xfff);
+
+ return (buf);
+}
+
+#define BUFSIZE_TODUMP_ATONCE 512 /* Buffer size */
+
+/* dump large strings to console */
+void
+printbig(char *buf)
+{
+ uint len, max_len;
+ char c;
+
+ len = strlen(buf);
+
+ max_len = BUFSIZE_TODUMP_ATONCE;
+
+ while (len > max_len) {
+ c = buf[max_len];
+ buf[max_len] = '\0';
+ printf("%s", buf);
+ buf[max_len] = c;
+
+ buf += max_len;
+ len -= max_len;
+ }
+ /* print the remaining string */
+ printf("%s\n", buf);
+ return;
+}
+
+/* routine to dump fields in a fileddesc structure */
+uint
+bcmdumpfields(bcmutl_rdreg_rtn read_rtn, void *arg0, uint arg1, struct fielddesc *fielddesc_array,
+ char *buf, uint32 bufsize)
+{
+ uint filled_len;
+ int len;
+ struct fielddesc *cur_ptr;
+
+ filled_len = 0;
+ cur_ptr = fielddesc_array;
+
+ while (bufsize > 1) {
+ if (cur_ptr->nameandfmt == NULL)
+ break;
+ len = snprintf(buf, bufsize, cur_ptr->nameandfmt,
+ read_rtn(arg0, arg1, cur_ptr->offset));
+ /* check for snprintf overflow or error */
+ if (len < 0 || (uint32)len >= bufsize)
+ len = bufsize - 1;
+ buf += len;
+ bufsize -= len;
+ filled_len += len;
+ cur_ptr++;
+ }
+ return filled_len;
+}
+
+uint
+bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint buflen)
+{
+ uint len;
+
+ len = strlen(name) + 1;
+
+ if ((len + datalen) > buflen)
+ return 0;
+
+ strncpy(buf, name, buflen);
+
+ /* append data onto the end of the name string */
+ memcpy(&buf[len], data, datalen);
+ len += datalen;
+
+ return len;
+}
+
+/* Quarter dBm units to mW
+ * Table starts at QDBM_OFFSET, so the first entry is mW for qdBm=153
+ * Table is offset so the last entry is largest mW value that fits in
+ * a uint16.
+ */
+
+#define QDBM_OFFSET 153 /* Offset for first entry */
+#define QDBM_TABLE_LEN 40 /* Table size */
+
+/* Smallest mW value that will round up to the first table entry, QDBM_OFFSET.
+ * Value is ( mW(QDBM_OFFSET - 1) + mW(QDBM_OFFSET) ) / 2
+ */
+#define QDBM_TABLE_LOW_BOUND 6493 /* Low bound */
+
+/* Largest mW value that will round down to the last table entry,
+ * QDBM_OFFSET + QDBM_TABLE_LEN-1.
+ * Value is ( mW(QDBM_OFFSET + QDBM_TABLE_LEN - 1) + mW(QDBM_OFFSET + QDBM_TABLE_LEN) ) / 2.
+ */
+#define QDBM_TABLE_HIGH_BOUND 64938 /* High bound */
+
+static const uint16 nqdBm_to_mW_map[QDBM_TABLE_LEN] = {
+/* qdBm: +0 +1 +2 +3 +4 +5 +6 +7 */
+/* 153: */ 6683, 7079, 7499, 7943, 8414, 8913, 9441, 10000,
+/* 161: */ 10593, 11220, 11885, 12589, 13335, 14125, 14962, 15849,
+/* 169: */ 16788, 17783, 18836, 19953, 21135, 22387, 23714, 25119,
+/* 177: */ 26607, 28184, 29854, 31623, 33497, 35481, 37584, 39811,
+/* 185: */ 42170, 44668, 47315, 50119, 53088, 56234, 59566, 63096
+};
+
+uint16
+bcm_qdbm_to_mw(uint8 qdbm)
+{
+ uint factor = 1;
+ int idx = qdbm - QDBM_OFFSET;
+
+ if (idx >= QDBM_TABLE_LEN) {
+ /* clamp to max uint16 mW value */
+ return 0xFFFF;
+ }
+
+ /* scale the qdBm index up to the range of the table 0-40
+ * where an offset of 40 qdBm equals a factor of 10 mW.
+ */
+ while (idx < 0) {
+ idx += 40;
+ factor *= 10;
+ }
+
+ /* return the mW value scaled down to the correct factor of 10,
+ * adding in factor/2 to get proper rounding.
+ */
+ return ((nqdBm_to_mW_map[idx] + factor/2) / factor);
+}
+
+uint8
+bcm_mw_to_qdbm(uint16 mw)
+{
+ uint8 qdbm;
+ int offset;
+ uint mw_uint = mw;
+ uint boundary;
+
+ /* handle boundary case */
+ if (mw_uint <= 1)
+ return 0;
+
+ offset = QDBM_OFFSET;
+
+ /* move mw into the range of the table */
+ while (mw_uint < QDBM_TABLE_LOW_BOUND) {
+ mw_uint *= 10;
+ offset -= 40;
+ }
+
+ for (qdbm = 0; qdbm < QDBM_TABLE_LEN-1; qdbm++) {
+ boundary = nqdBm_to_mW_map[qdbm] + (nqdBm_to_mW_map[qdbm+1] -
+ nqdBm_to_mW_map[qdbm])/2;
+ if (mw_uint < boundary) break;
+ }
+
+ qdbm += (uint8)offset;
+
+ return (qdbm);
+}
+
+
+uint
+bcm_bitcount(uint8 *bitmap, uint length)
+{
+ uint bitcount = 0, i;
+ uint8 tmp;
+ for (i = 0; i < length; i++) {
+ tmp = bitmap[i];
+ while (tmp) {
+ bitcount++;
+ tmp &= (tmp - 1);
+ }
+ }
+ return bitcount;
+}
+
+#ifdef BCMDRIVER
+
+/* Initialization of bcmstrbuf structure */
+void
+bcm_binit(struct bcmstrbuf *b, char *buf, uint size)
+{
+ b->origsize = b->size = size;
+ b->origbuf = b->buf = buf;
+}
+
+/* Buffer sprintf wrapper to guard against buffer overflow */
+int
+bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...)
+{
+ va_list ap;
+ int r;
+
+ va_start(ap, fmt);
+ r = vsnprintf(b->buf, b->size, fmt, ap);
+
+ /* Non Ansi C99 compliant returns -1,
+ * Ansi compliant return r >= b->size,
+ * bcmstdlib returns 0, handle all
+ */
+ if ((r == -1) || (r >= (int)b->size) || (r == 0)) {
+ b->size = 0;
+ } else {
+ b->size -= r;
+ b->buf += r;
+ }
+
+ va_end(ap);
+
+ return r;
+}
+
+void
+bcm_inc_bytes(uchar *num, int num_bytes, uint8 amount)
+{
+ int i;
+
+ for (i = 0; i < num_bytes; i++) {
+ num[i] += amount;
+ if (num[i] >= amount)
+ break;
+ amount = 1;
+ }
+}
+
+int
+bcm_cmp_bytes(uchar *arg1, uchar *arg2, uint8 nbytes)
+{
+ int i;
+
+ for (i = nbytes - 1; i >= 0; i--) {
+ if (arg1[i] != arg2[i])
+ return (arg1[i] - arg2[i]);
+ }
+ return 0;
+}
+
+void
+bcm_print_bytes(char *name, const uchar *data, int len)
+{
+ int i;
+ int per_line = 0;
+
+ printf("%s: %d \n", name ? name : "", len);
+ for (i = 0; i < len; i++) {
+ printf("%02x ", *data++);
+ per_line++;
+ if (per_line == 16) {
+ per_line = 0;
+ printf("\n");
+ }
+ }
+ printf("\n");
+}
+
+/*
+ * buffer length needed for wlc_format_ssid
+ * 32 SSID chars, max of 4 chars for each SSID char "\xFF", plus NULL.
+ */
+
+#if defined(WLTINYDUMP) || defined(WLMSG_INFORM) || defined(WLMSG_ASSOC) || \
+ defined(WLMSG_PRPKT) || defined(WLMSG_WSEC)
+int
+bcm_format_ssid(char* buf, const uchar ssid[], uint ssid_len)
+{
+ uint i, c;
+ char *p = buf;
+ char *endp = buf + SSID_FMT_BUF_LEN;
+
+ if (ssid_len > DOT11_MAX_SSID_LEN) ssid_len = DOT11_MAX_SSID_LEN;
+
+ for (i = 0; i < ssid_len; i++) {
+ c = (uint)ssid[i];
+ if (c == '\\') {
+ *p++ = '\\';
+ *p++ = '\\';
+ } else if (bcm_isprint((uchar)c)) {
+ *p++ = (char)c;
+ } else {
+ p += snprintf(p, (endp - p), "\\x%02X", c);
+ }
+ }
+ *p = '\0';
+ ASSERT(p < endp);
+
+ return (int)(p - buf);
+}
+#endif
+
+#endif /* BCMDRIVER */
diff --git a/drivers/net/wireless/bcm4329/bcmwifi.c b/drivers/net/wireless/bcm4329/bcmwifi.c
new file mode 100644
index 0000000..803acf8
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/bcmwifi.c
@@ -0,0 +1,199 @@
+/*
+ * Misc utility routines used by kernel or app-level.
+ * Contents are wifi-specific, used by any kernel or app-level
+ * software that might want wifi things as it grows.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: bcmwifi.c,v 1.18.24.2.4.1 2009/09/25 00:32:01 Exp $
+ */
+
+
+#include <typedefs.h>
+
+#ifdef BCMDRIVER
+#include <osl.h>
+#include <bcmutils.h>
+#define strtoul(nptr, endptr, base) bcm_strtoul((nptr), (endptr), (base))
+#define tolower(c) (bcm_isupper((c)) ? ((c) + 'a' - 'A') : (c))
+#else
+#include <stdio.h>
+#include <stdlib.h>
+#include <ctype.h>
+#endif
+#include <bcmwifi.h>
+
+#if defined(WIN32) && (defined(BCMDLL) || defined(WLMDLL))
+#include <bcmstdlib.h>
+#endif
+
+
+
+
+
+char *
+wf_chspec_ntoa(chanspec_t chspec, char *buf)
+{
+ const char *band, *bw, *sb;
+ uint channel;
+
+ band = "";
+ bw = "";
+ sb = "";
+ channel = CHSPEC_CHANNEL(chspec);
+
+ if ((CHSPEC_IS2G(chspec) && channel > CH_MAX_2G_CHANNEL) ||
+ (CHSPEC_IS5G(chspec) && channel <= CH_MAX_2G_CHANNEL))
+ band = (CHSPEC_IS2G(chspec)) ? "b" : "a";
+ if (CHSPEC_IS40(chspec)) {
+ if (CHSPEC_SB_UPPER(chspec)) {
+ sb = "u";
+ channel += CH_10MHZ_APART;
+ } else {
+ sb = "l";
+ channel -= CH_10MHZ_APART;
+ }
+ } else if (CHSPEC_IS10(chspec)) {
+ bw = "n";
+ }
+
+
+ snprintf(buf, 6, "%d%s%s%s", channel, band, bw, sb);
+ return (buf);
+}
+
+
+chanspec_t
+wf_chspec_aton(char *a)
+{
+ char *endp = NULL;
+ uint channel, band, bw, ctl_sb;
+ char c;
+
+ channel = strtoul(a, &endp, 10);
+
+
+ if (endp == a)
+ return 0;
+
+ if (channel > MAXCHANNEL)
+ return 0;
+
+ band = ((channel <= CH_MAX_2G_CHANNEL) ? WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G);
+ bw = WL_CHANSPEC_BW_20;
+ ctl_sb = WL_CHANSPEC_CTL_SB_NONE;
+
+ a = endp;
+
+ c = tolower(a[0]);
+ if (c == '\0')
+ goto done;
+
+
+ if (c == 'a' || c == 'b') {
+ band = (c == 'a') ? WL_CHANSPEC_BAND_5G : WL_CHANSPEC_BAND_2G;
+ a++;
+ c = tolower(a[0]);
+ if (c == '\0')
+ goto done;
+ }
+
+
+ if (c == 'n') {
+ bw = WL_CHANSPEC_BW_10;
+ } else if (c == 'l') {
+ bw = WL_CHANSPEC_BW_40;
+ ctl_sb = WL_CHANSPEC_CTL_SB_LOWER;
+
+ if (channel <= (MAXCHANNEL - CH_20MHZ_APART))
+ channel += CH_10MHZ_APART;
+ else
+ return 0;
+ } else if (c == 'u') {
+ bw = WL_CHANSPEC_BW_40;
+ ctl_sb = WL_CHANSPEC_CTL_SB_UPPER;
+
+ if (channel > CH_20MHZ_APART)
+ channel -= CH_10MHZ_APART;
+ else
+ return 0;
+ } else {
+ return 0;
+ }
+
+done:
+ return (channel | band | bw | ctl_sb);
+}
+
+
+int
+wf_mhz2channel(uint freq, uint start_factor)
+{
+ int ch = -1;
+ uint base;
+ int offset;
+
+
+ if (start_factor == 0) {
+ if (freq >= 2400 && freq <= 2500)
+ start_factor = WF_CHAN_FACTOR_2_4_G;
+ else if (freq >= 5000 && freq <= 6000)
+ start_factor = WF_CHAN_FACTOR_5_G;
+ }
+
+ if (freq == 2484 && start_factor == WF_CHAN_FACTOR_2_4_G)
+ return 14;
+
+ base = start_factor / 2;
+
+
+ if ((freq < base) || (freq > base + 1000))
+ return -1;
+
+ offset = freq - base;
+ ch = offset / 5;
+
+
+ if (offset != (ch * 5))
+ return -1;
+
+
+ if (start_factor == WF_CHAN_FACTOR_2_4_G && (ch < 1 || ch > 13))
+ return -1;
+
+ return ch;
+}
+
+
+int
+wf_channel2mhz(uint ch, uint start_factor)
+{
+ int freq;
+
+ if ((start_factor == WF_CHAN_FACTOR_2_4_G && (ch < 1 || ch > 14)) ||
+ (ch <= 200))
+ freq = -1;
+ if ((start_factor == WF_CHAN_FACTOR_2_4_G) && (ch == 14))
+ freq = 2484;
+ else
+ freq = ch * 5 + start_factor / 2;
+
+ return freq;
+}
diff --git a/drivers/net/wireless/bcm4329/dhd.h b/drivers/net/wireless/bcm4329/dhd.h
new file mode 100644
index 0000000..1ddf1ff
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dhd.h
@@ -0,0 +1,437 @@
+/*
+ * Header file describing the internal (inter-module) DHD interfaces.
+ *
+ * Provides type definitions and function prototypes used to link the
+ * DHD OS, bus, and protocol modules.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhd.h,v 1.32.4.7.2.4.14.49.4.7 2010/11/12 22:48:36 Exp $
+ */
+
+/****************
+ * Common types *
+ */
+
+#ifndef _dhd_h_
+#define _dhd_h_
+
+#if defined(LINUX)
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/random.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+
+/* The kernel threading is sdio-specific */
+#else /* LINUX */
+#define ENOMEM 1
+#define EFAULT 2
+#define EINVAL 3
+#define EIO 4
+#define ETIMEDOUT 5
+#define ERESTARTSYS 6
+#endif /* LINUX */
+
+#include <wlioctl.h>
+
+#ifdef DHD_DEBUG
+#ifndef DHD_DEBUG_TRAP
+#define DHD_DEBUG_TRAP
+#endif
+#endif
+
+/* Forward decls */
+struct dhd_bus;
+struct dhd_prot;
+struct dhd_info;
+
+/* The level of bus communication with the dongle */
+enum dhd_bus_state {
+ DHD_BUS_DOWN, /* Not ready for frame transfers */
+ DHD_BUS_LOAD, /* Download access only (CPU reset) */
+ DHD_BUS_DATA /* Ready for frame transfers */
+};
+
+enum dhd_bus_wake_state {
+ WAKE_LOCK_OFF,
+ WAKE_LOCK_PRIV,
+ WAKE_LOCK_DPC,
+ WAKE_LOCK_IOCTL,
+ WAKE_LOCK_DOWNLOAD,
+ WAKE_LOCK_TMOUT,
+ WAKE_LOCK_WATCHDOG,
+ WAKE_LOCK_LINK_DOWN_TMOUT,
+ WAKE_LOCK_PNO_FIND_TMOUT,
+ WAKE_LOCK_SOFTAP_SET,
+ WAKE_LOCK_SOFTAP_STOP,
+ WAKE_LOCK_SOFTAP_START,
+ WAKE_LOCK_SOFTAP_THREAD,
+ WAKE_LOCK_MAX
+};
+enum dhd_prealloc_index {
+ DHD_PREALLOC_PROT = 0,
+ DHD_PREALLOC_RXBUF,
+ DHD_PREALLOC_DATABUF,
+ DHD_PREALLOC_OSL_BUF
+};
+#ifdef DHD_USE_STATIC_BUF
+extern void * dhd_os_prealloc(int section, unsigned long size);
+#endif
+/* Common structure for module and instance linkage */
+typedef struct dhd_pub {
+ /* Linkage ponters */
+ osl_t *osh; /* OSL handle */
+ struct dhd_bus *bus; /* Bus module handle */
+ struct dhd_prot *prot; /* Protocol module handle */
+ struct dhd_info *info; /* Info module handle */
+
+ /* Internal dhd items */
+ bool up; /* Driver up/down (to OS) */
+ bool txoff; /* Transmit flow-controlled */
+ bool dongle_reset; /* TRUE = DEVRESET put dongle into reset */
+ enum dhd_bus_state busstate;
+ uint hdrlen; /* Total DHD header length (proto + bus) */
+ uint maxctl; /* Max size rxctl request from proto to bus */
+ uint rxsz; /* Rx buffer size bus module should use */
+ uint8 wme_dp; /* wme discard priority */
+
+ /* Dongle media info */
+ bool iswl; /* Dongle-resident driver is wl */
+ ulong drv_version; /* Version of dongle-resident driver */
+ struct ether_addr mac; /* MAC address obtained from dongle */
+ dngl_stats_t dstats; /* Stats for dongle-based data */
+
+ /* Additional stats for the bus level */
+ ulong tx_packets; /* Data packets sent to dongle */
+ ulong tx_multicast; /* Multicast data packets sent to dongle */
+ ulong tx_errors; /* Errors in sending data to dongle */
+ ulong tx_ctlpkts; /* Control packets sent to dongle */
+ ulong tx_ctlerrs; /* Errors sending control frames to dongle */
+ ulong rx_packets; /* Packets sent up the network interface */
+ ulong rx_multicast; /* Multicast packets sent up the network interface */
+ ulong rx_errors; /* Errors processing rx data packets */
+ ulong rx_ctlpkts; /* Control frames processed from dongle */
+ ulong rx_ctlerrs; /* Errors in processing rx control frames */
+ ulong rx_dropped; /* Packets dropped locally (no memory) */
+ ulong rx_flushed; /* Packets flushed due to unscheduled sendup thread */
+ ulong wd_dpc_sched; /* Number of times dhd dpc scheduled by watchdog timer */
+
+ ulong rx_readahead_cnt; /* Number of packets where header read-ahead was used. */
+ ulong tx_realloc; /* Number of tx packets we had to realloc for headroom */
+ ulong fc_packets; /* Number of flow control pkts recvd */
+
+ /* Last error return */
+ int bcmerror;
+ uint tickcnt;
+
+ /* Last error from dongle */
+ int dongle_error;
+
+ /* Suspend disable flag and "in suspend" flag */
+ int suspend_disable_flag; /* "1" to disable all extra powersaving during suspend */
+ int in_suspend; /* flag set to 1 when early suspend called */
+#ifdef PNO_SUPPORT
+ int pno_enable; /* pno status : "1" is pno enable */
+#endif /* PNO_SUPPORT */
+ int dtim_skip; /* dtim skip , default 0 means wake each dtim */
+
+ /* Pkt filter defination */
+ char * pktfilter[100];
+ int pktfilter_count;
+
+ uint8 country_code[WLC_CNTRY_BUF_SZ];
+ char eventmask[WL_EVENTING_MASK_LEN];
+
+} dhd_pub_t;
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP)
+
+ #define DHD_PM_RESUME_WAIT_INIT(a) DECLARE_WAIT_QUEUE_HEAD(a);
+ #define _DHD_PM_RESUME_WAIT(a, b) do { \
+ int retry = 0; \
+ smp_mb(); \
+ while (dhd_mmc_suspend && retry++ != b) { \
+ wait_event_interruptible_timeout(a, FALSE, HZ/100); \
+ } \
+ } while (0)
+ #define DHD_PM_RESUME_WAIT(a) _DHD_PM_RESUME_WAIT(a, 30)
+ #define DHD_PM_RESUME_WAIT_FOREVER(a) _DHD_PM_RESUME_WAIT(a, ~0)
+ #define DHD_PM_RESUME_RETURN_ERROR(a) do { if (dhd_mmc_suspend) return a; } while (0)
+ #define DHD_PM_RESUME_RETURN do { if (dhd_mmc_suspend) return; } while (0)
+
+ #define DHD_SPINWAIT_SLEEP_INIT(a) DECLARE_WAIT_QUEUE_HEAD(a);
+ #define SPINWAIT_SLEEP(a, exp, us) do { \
+ uint countdown = (us) + 9999; \
+ while ((exp) && (countdown >= 10000)) { \
+ wait_event_interruptible_timeout(a, FALSE, HZ/100); \
+ countdown -= 10000; \
+ } \
+ } while (0)
+
+#else
+
+ #define DHD_PM_RESUME_WAIT_INIT(a)
+ #define DHD_PM_RESUME_WAIT(a)
+ #define DHD_PM_RESUME_WAIT_FOREVER(a)
+ #define DHD_PM_RESUME_RETURN_ERROR(a)
+ #define DHD_PM_RESUME_RETURN
+
+ #define DHD_SPINWAIT_SLEEP_INIT(a)
+ #define SPINWAIT_SLEEP(a, exp, us) do { \
+ uint countdown = (us) + 9; \
+ while ((exp) && (countdown >= 10)) { \
+ OSL_DELAY(10); \
+ countdown -= 10; \
+ } \
+ } while (0)
+
+#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP) */
+
+#define DHD_IF_VIF 0x01 /* Virtual IF (Hidden from user) */
+
+/* Wakelock Functions */
+extern int dhd_os_wake_lock(dhd_pub_t *pub);
+extern int dhd_os_wake_unlock(dhd_pub_t *pub);
+extern int dhd_os_wake_lock_timeout(dhd_pub_t *pub);
+extern int dhd_os_wake_lock_timeout_enable(dhd_pub_t *pub);
+
+extern void dhd_os_start_lock(dhd_pub_t *pub);
+extern void dhd_os_start_unlock(dhd_pub_t *pub);
+extern unsigned long dhd_os_spin_lock(dhd_pub_t *pub);
+extern void dhd_os_spin_unlock(dhd_pub_t *pub, unsigned long flags);
+
+typedef struct dhd_if_event {
+ uint8 ifidx;
+ uint8 action;
+ uint8 flags;
+ uint8 bssidx;
+} dhd_if_event_t;
+
+/*
+ * Exported from dhd OS modules (dhd_linux/dhd_ndis)
+ */
+
+/* To allow osl_attach/detach calls from os-independent modules */
+osl_t *dhd_osl_attach(void *pdev, uint bustype);
+void dhd_osl_detach(osl_t *osh);
+
+/* Indication from bus module regarding presence/insertion of dongle.
+ * Return dhd_pub_t pointer, used as handle to OS module in later calls.
+ * Returned structure should have bus and prot pointers filled in.
+ * bus_hdrlen specifies required headroom for bus module header.
+ */
+extern dhd_pub_t *dhd_attach(osl_t *osh, struct dhd_bus *bus, uint bus_hdrlen);
+extern int dhd_net_attach(dhd_pub_t *dhdp, int idx);
+
+/* Indication from bus module regarding removal/absence of dongle */
+extern void dhd_detach(dhd_pub_t *dhdp);
+
+/* Indication from bus module to change flow-control state */
+extern void dhd_txflowcontrol(dhd_pub_t *dhdp, int ifidx, bool on);
+
+extern bool dhd_prec_enq(dhd_pub_t *dhdp, struct pktq *q, void *pkt, int prec);
+
+/* Receive frame for delivery to OS. Callee disposes of rxp. */
+extern void dhd_rx_frame(dhd_pub_t *dhdp, int ifidx, void *rxp, int numpkt);
+
+/* Return pointer to interface name */
+extern char *dhd_ifname(dhd_pub_t *dhdp, int idx);
+
+/* Request scheduling of the bus dpc */
+extern void dhd_sched_dpc(dhd_pub_t *dhdp);
+
+/* Notify tx completion */
+extern void dhd_txcomplete(dhd_pub_t *dhdp, void *txp, bool success);
+
+/* Query ioctl */
+extern int dhdcdc_query_ioctl(dhd_pub_t *dhd, int ifidx, uint cmd, void *buf, uint len);
+
+/* OS independent layer functions */
+extern int dhd_os_proto_block(dhd_pub_t * pub);
+extern int dhd_os_proto_unblock(dhd_pub_t * pub);
+extern int dhd_os_ioctl_resp_wait(dhd_pub_t * pub, uint * condition, bool * pending);
+extern int dhd_os_ioctl_resp_wake(dhd_pub_t * pub);
+extern unsigned int dhd_os_get_ioctl_resp_timeout(void);
+extern void dhd_os_set_ioctl_resp_timeout(unsigned int timeout_msec);
+extern void * dhd_os_open_image(char * filename);
+extern int dhd_os_get_image_block(char * buf, int len, void * image);
+extern void dhd_os_close_image(void * image);
+extern void dhd_os_wd_timer(void *bus, uint wdtick);
+extern void dhd_os_sdlock(dhd_pub_t * pub);
+extern void dhd_os_sdunlock(dhd_pub_t * pub);
+extern void dhd_os_sdlock_txq(dhd_pub_t * pub);
+extern void dhd_os_sdunlock_txq(dhd_pub_t * pub);
+extern void dhd_os_sdlock_rxq(dhd_pub_t * pub);
+extern void dhd_os_sdunlock_rxq(dhd_pub_t * pub);
+extern void dhd_os_sdlock_sndup_rxq(dhd_pub_t * pub);
+extern void dhd_customer_gpio_wlan_ctrl(int onoff);
+extern int dhd_custom_get_mac_address(unsigned char *buf);
+extern void dhd_os_sdunlock_sndup_rxq(dhd_pub_t * pub);
+extern void dhd_os_sdlock_eventq(dhd_pub_t * pub);
+extern void dhd_os_sdunlock_eventq(dhd_pub_t * pub);
+#ifdef DHD_DEBUG
+extern int write_to_file(dhd_pub_t *dhd, uint8 *buf, int size);
+#endif /* DHD_DEBUG */
+#if defined(OOB_INTR_ONLY)
+extern int dhd_customer_oob_irq_map(unsigned long *irq_flags_ptr);
+#endif /* defined(OOB_INTR_ONLY) */
+extern void dhd_os_sdtxlock(dhd_pub_t * pub);
+extern void dhd_os_sdtxunlock(dhd_pub_t * pub);
+
+int setScheduler(struct task_struct *p, int policy, struct sched_param *param);
+
+typedef struct {
+ uint32 limit; /* Expiration time (usec) */
+ uint32 increment; /* Current expiration increment (usec) */
+ uint32 elapsed; /* Current elapsed time (usec) */
+ uint32 tick; /* O/S tick time (usec) */
+} dhd_timeout_t;
+
+extern void dhd_timeout_start(dhd_timeout_t *tmo, uint usec);
+extern int dhd_timeout_expired(dhd_timeout_t *tmo);
+
+extern int dhd_ifname2idx(struct dhd_info *dhd, char *name);
+extern uint8 *dhd_bssidx2bssid(dhd_pub_t *dhd, int idx);
+extern int wl_host_event(struct dhd_info *dhd, int *idx, void *pktdata,
+ wl_event_msg_t *, void **data_ptr);
+extern void wl_event_to_host_order(wl_event_msg_t * evt);
+
+extern void dhd_common_init(void);
+
+extern int dhd_add_if(struct dhd_info *dhd, int ifidx, void *handle,
+ char *name, uint8 *mac_addr, uint32 flags, uint8 bssidx);
+extern void dhd_del_if(struct dhd_info *dhd, int ifidx);
+
+extern void dhd_vif_add(struct dhd_info *dhd, int ifidx, char * name);
+extern void dhd_vif_del(struct dhd_info *dhd, int ifidx);
+
+extern void dhd_event(struct dhd_info *dhd, char *evpkt, int evlen, int ifidx);
+extern void dhd_vif_sendup(struct dhd_info *dhd, int ifidx, uchar *cp, int len);
+
+
+/* Send packet to dongle via data channel */
+extern int dhd_sendpkt(dhd_pub_t *dhdp, int ifidx, void *pkt);
+
+/* Send event to host */
+extern void dhd_sendup_event(dhd_pub_t *dhdp, wl_event_msg_t *event, void *data);
+extern int dhd_bus_devreset(dhd_pub_t *dhdp, uint8 flag);
+extern uint dhd_bus_status(dhd_pub_t *dhdp);
+extern int dhd_bus_start(dhd_pub_t *dhdp);
+
+extern void print_buf(void *pbuf, int len, int bytes_per_line);
+
+
+typedef enum cust_gpio_modes {
+ WLAN_RESET_ON,
+ WLAN_RESET_OFF,
+ WLAN_POWER_ON,
+ WLAN_POWER_OFF
+} cust_gpio_modes_t;
+
+extern int wl_iw_iscan_set_scan_broadcast_prep(struct net_device *dev, uint flag);
+extern int wl_iw_send_priv_event(struct net_device *dev, char *flag);
+extern int net_os_send_hang_message(struct net_device *dev);
+
+/*
+ * Insmod parameters for debug/test
+ */
+
+/* Watchdog timer interval */
+extern uint dhd_watchdog_ms;
+
+#if defined(DHD_DEBUG)
+/* Console output poll interval */
+extern uint dhd_console_ms;
+#endif /* defined(DHD_DEBUG) */
+
+/* Use interrupts */
+extern uint dhd_intr;
+
+/* Use polling */
+extern uint dhd_poll;
+
+/* ARP offload agent mode */
+extern uint dhd_arp_mode;
+
+/* ARP offload enable */
+extern uint dhd_arp_enable;
+
+/* Pkt filte enable control */
+extern uint dhd_pkt_filter_enable;
+
+/* Pkt filter init setup */
+extern uint dhd_pkt_filter_init;
+
+/* Pkt filter mode control */
+extern uint dhd_master_mode;
+
+/* Roaming mode control */
+extern uint dhd_roam;
+
+/* Roaming mode control */
+extern uint dhd_radio_up;
+
+/* Initial idletime ticks (may be -1 for immediate idle, 0 for no idle) */
+extern int dhd_idletime;
+#define DHD_IDLETIME_TICKS 1
+
+/* SDIO Drive Strength */
+extern uint dhd_sdiod_drive_strength;
+
+/* Override to force tx queueing all the time */
+extern uint dhd_force_tx_queueing;
+
+/* Default KEEP_ALIVE Period is 55 sec to prevent AP from sending Keep Alive probe frame */
+#define KEEP_ALIVE_PERIOD 55000
+#define NULL_PKT_STR "null_pkt"
+
+#ifdef SDTEST
+/* Echo packet generator (SDIO), pkts/s */
+extern uint dhd_pktgen;
+
+/* Echo packet len (0 => sawtooth, max 1800) */
+extern uint dhd_pktgen_len;
+#define MAX_PKTGEN_LEN 1800
+#endif
+
+
+/* optionally set by a module_param_string() */
+#define MOD_PARAM_PATHLEN 2048
+extern char fw_path[MOD_PARAM_PATHLEN];
+extern char nv_path[MOD_PARAM_PATHLEN];
+
+/* For supporting multiple interfaces */
+#define DHD_MAX_IFS 16
+#define DHD_DEL_IF -0xe
+#define DHD_BAD_IF -0xf
+
+
+extern void dhd_wait_for_event(dhd_pub_t *dhd, bool *lockvar);
+extern void dhd_wait_event_wakeup(dhd_pub_t*dhd);
+
+#endif /* _dhd_h_ */
diff --git a/drivers/net/wireless/bcm4329/dhd_bus.h b/drivers/net/wireless/bcm4329/dhd_bus.h
new file mode 100644
index 0000000..97af41b
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dhd_bus.h
@@ -0,0 +1,93 @@
+/*
+ * Header file describing the internal (inter-module) DHD interfaces.
+ *
+ * Provides type definitions and function prototypes used to link the
+ * DHD OS, bus, and protocol modules.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhd_bus.h,v 1.4.6.3.2.3.6.7 2010/08/13 01:35:24 Exp $
+ */
+
+#ifndef _dhd_bus_h_
+#define _dhd_bus_h_
+
+/*
+ * Exported from dhd bus module (dhd_usb, dhd_sdio)
+ */
+
+/* Indicate (dis)interest in finding dongles. */
+extern int dhd_bus_register(void);
+extern void dhd_bus_unregister(void);
+
+/* Download firmware image and nvram image */
+extern bool dhd_bus_download_firmware(struct dhd_bus *bus, osl_t *osh,
+ char *fw_path, char *nv_path);
+
+/* Stop bus module: clear pending frames, disable data flow */
+extern void dhd_bus_stop(struct dhd_bus *bus, bool enforce_mutex);
+
+/* Initialize bus module: prepare for communication w/dongle */
+extern int dhd_bus_init(dhd_pub_t *dhdp, bool enforce_mutex);
+
+/* Send a data frame to the dongle. Callee disposes of txp. */
+extern int dhd_bus_txdata(struct dhd_bus *bus, void *txp);
+
+/* Send/receive a control message to/from the dongle.
+ * Expects caller to enforce a single outstanding transaction.
+ */
+extern int dhd_bus_txctl(struct dhd_bus *bus, uchar *msg, uint msglen);
+extern int dhd_bus_rxctl(struct dhd_bus *bus, uchar *msg, uint msglen);
+
+/* Watchdog timer function */
+extern bool dhd_bus_watchdog(dhd_pub_t *dhd);
+
+#ifdef DHD_DEBUG
+/* Device console input function */
+extern int dhd_bus_console_in(dhd_pub_t *dhd, uchar *msg, uint msglen);
+#endif /* DHD_DEBUG */
+
+/* Deferred processing for the bus, return TRUE requests reschedule */
+extern bool dhd_bus_dpc(struct dhd_bus *bus);
+extern void dhd_bus_isr(bool * InterruptRecognized, bool * QueueMiniportHandleInterrupt, void *arg);
+
+
+/* Check for and handle local prot-specific iovar commands */
+extern int dhd_bus_iovar_op(dhd_pub_t *dhdp, const char *name,
+ void *params, int plen, void *arg, int len, bool set);
+
+/* Add bus dump output to a buffer */
+extern void dhd_bus_dump(dhd_pub_t *dhdp, struct bcmstrbuf *strbuf);
+
+/* Clear any bus counters */
+extern void dhd_bus_clearcounts(dhd_pub_t *dhdp);
+
+/* return the dongle chipid */
+extern uint dhd_bus_chip(struct dhd_bus *bus);
+
+/* Set user-specified nvram parameters. */
+extern void dhd_bus_set_nvram_params(struct dhd_bus * bus, const char *nvram_params);
+
+extern void *dhd_bus_pub(struct dhd_bus *bus);
+extern void *dhd_bus_txq(struct dhd_bus *bus);
+extern uint dhd_bus_hdrlen(struct dhd_bus *bus);
+
+#endif /* _dhd_bus_h_ */
diff --git a/drivers/net/wireless/bcm4329/dhd_cdc.c b/drivers/net/wireless/bcm4329/dhd_cdc.c
new file mode 100644
index 0000000..61f6a6f
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dhd_cdc.c
@@ -0,0 +1,522 @@
+/*
+ * DHD Protocol Module for CDC and BDC.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhd_cdc.c,v 1.22.4.2.4.7.2.41 2010/06/23 19:58:18 Exp $
+ *
+ * BDC is like CDC, except it includes a header for data packets to convey
+ * packet priority over the bus, and flags (e.g. to indicate checksum status
+ * for dongle offload).
+ */
+
+#include <typedefs.h>
+#include <osl.h>
+
+#include <bcmutils.h>
+#include <bcmcdc.h>
+#include <bcmendian.h>
+
+#include <dngl_stats.h>
+#include <dhd.h>
+#include <dhd_proto.h>
+#include <dhd_bus.h>
+#include <dhd_dbg.h>
+
+extern int dhd_preinit_ioctls(dhd_pub_t *dhd);
+
+/* Packet alignment for most efficient SDIO (can change based on platform) */
+#ifndef DHD_SDALIGN
+#define DHD_SDALIGN 32
+#endif
+#if !ISPOWEROF2(DHD_SDALIGN)
+#error DHD_SDALIGN is not a power of 2!
+#endif
+
+#define RETRIES 2 /* # of retries to retrieve matching ioctl response */
+#define BUS_HEADER_LEN (16+DHD_SDALIGN) /* Must be atleast SDPCM_RESERVE
+ * defined in dhd_sdio.c (amount of header tha might be added)
+ * plus any space that might be needed for alignment padding.
+ */
+#define ROUND_UP_MARGIN 2048 /* Biggest SDIO block size possible for
+ * round off at the end of buffer
+ */
+
+typedef struct dhd_prot {
+ uint16 reqid;
+ uint8 pending;
+ uint32 lastcmd;
+ uint8 bus_header[BUS_HEADER_LEN];
+ cdc_ioctl_t msg;
+ unsigned char buf[WLC_IOCTL_MAXLEN + ROUND_UP_MARGIN];
+} dhd_prot_t;
+
+static int
+dhdcdc_msg(dhd_pub_t *dhd)
+{
+ dhd_prot_t *prot = dhd->prot;
+ int len = ltoh32(prot->msg.len) + sizeof(cdc_ioctl_t);
+ int ret;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ dhd_os_wake_lock(dhd);
+
+ /* NOTE : cdc->msg.len holds the desired length of the buffer to be
+ * returned. Only up to CDC_MAX_MSG_SIZE of this buffer area
+ * is actually sent to the dongle
+ */
+ if (len > CDC_MAX_MSG_SIZE)
+ len = CDC_MAX_MSG_SIZE;
+
+ /* Send request */
+ ret = dhd_bus_txctl(dhd->bus, (uchar*)&prot->msg, len);
+ dhd_os_wake_unlock(dhd);
+ return ret;
+}
+
+static int
+dhdcdc_cmplt(dhd_pub_t *dhd, uint32 id, uint32 len)
+{
+ int ret;
+ dhd_prot_t *prot = dhd->prot;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ do {
+ ret = dhd_bus_rxctl(dhd->bus, (uchar*)&prot->msg, len+sizeof(cdc_ioctl_t));
+ if (ret < 0)
+ break;
+ } while (CDC_IOC_ID(ltoh32(prot->msg.flags)) != id);
+
+ return ret;
+}
+
+int
+dhdcdc_query_ioctl(dhd_pub_t *dhd, int ifidx, uint cmd, void *buf, uint len)
+{
+ dhd_prot_t *prot = dhd->prot;
+ cdc_ioctl_t *msg = &prot->msg;
+ void *info;
+ int ret = 0, retries = 0;
+ uint32 id, flags = 0;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+ DHD_CTL(("%s: cmd %d len %d\n", __FUNCTION__, cmd, len));
+
+
+ /* Respond "bcmerror" and "bcmerrorstr" with local cache */
+ if (cmd == WLC_GET_VAR && buf)
+ {
+ if (!strcmp((char *)buf, "bcmerrorstr"))
+ {
+ strncpy((char *)buf, bcmerrorstr(dhd->dongle_error), BCME_STRLEN);
+ goto done;
+ }
+ else if (!strcmp((char *)buf, "bcmerror"))
+ {
+ *(int *)buf = dhd->dongle_error;
+ goto done;
+ }
+ }
+
+ memset(msg, 0, sizeof(cdc_ioctl_t));
+
+ msg->cmd = htol32(cmd);
+ msg->len = htol32(len);
+ msg->flags = (++prot->reqid << CDCF_IOC_ID_SHIFT);
+ CDC_SET_IF_IDX(msg, ifidx);
+ msg->flags = htol32(msg->flags);
+
+ if (buf)
+ memcpy(prot->buf, buf, len);
+
+ if ((ret = dhdcdc_msg(dhd)) < 0) {
+ DHD_ERROR(("dhdcdc_query_ioctl: dhdcdc_msg failed w/status %d\n", ret));
+ goto done;
+ }
+
+retry:
+ /* wait for interrupt and get first fragment */
+ if ((ret = dhdcdc_cmplt(dhd, prot->reqid, len)) < 0)
+ goto done;
+
+ flags = ltoh32(msg->flags);
+ id = (flags & CDCF_IOC_ID_MASK) >> CDCF_IOC_ID_SHIFT;
+
+ if ((id < prot->reqid) && (++retries < RETRIES))
+ goto retry;
+ if (id != prot->reqid) {
+ DHD_ERROR(("%s: %s: unexpected request id %d (expected %d)\n",
+ dhd_ifname(dhd, ifidx), __FUNCTION__, id, prot->reqid));
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /* Check info buffer */
+ info = (void*)&msg[1];
+
+ /* Copy info buffer */
+ if (buf)
+ {
+ if (ret < (int)len)
+ len = ret;
+ memcpy(buf, info, len);
+ }
+
+ /* Check the ERROR flag */
+ if (flags & CDCF_IOC_ERROR)
+ {
+ ret = ltoh32(msg->status);
+ /* Cache error from dongle */
+ dhd->dongle_error = ret;
+ }
+
+done:
+ return ret;
+}
+
+int
+dhdcdc_set_ioctl(dhd_pub_t *dhd, int ifidx, uint cmd, void *buf, uint len)
+{
+ dhd_prot_t *prot = dhd->prot;
+ cdc_ioctl_t *msg = &prot->msg;
+ int ret = 0;
+ uint32 flags, id;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+ DHD_CTL(("%s: cmd %d len %d\n", __FUNCTION__, cmd, len));
+
+ memset(msg, 0, sizeof(cdc_ioctl_t));
+
+ msg->cmd = htol32(cmd);
+ msg->len = htol32(len);
+ msg->flags = (++prot->reqid << CDCF_IOC_ID_SHIFT) | CDCF_IOC_SET;
+ CDC_SET_IF_IDX(msg, ifidx);
+ msg->flags = htol32(msg->flags);
+
+ if (buf)
+ memcpy(prot->buf, buf, len);
+
+ if ((ret = dhdcdc_msg(dhd)) < 0)
+ goto done;
+
+ if ((ret = dhdcdc_cmplt(dhd, prot->reqid, len)) < 0)
+ goto done;
+
+ flags = ltoh32(msg->flags);
+ id = (flags & CDCF_IOC_ID_MASK) >> CDCF_IOC_ID_SHIFT;
+
+ if (id != prot->reqid) {
+ DHD_ERROR(("%s: %s: unexpected request id %d (expected %d)\n",
+ dhd_ifname(dhd, ifidx), __FUNCTION__, id, prot->reqid));
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /* Check the ERROR flag */
+ if (flags & CDCF_IOC_ERROR)
+ {
+ ret = ltoh32(msg->status);
+ /* Cache error from dongle */
+ dhd->dongle_error = ret;
+ }
+
+done:
+ return ret;
+}
+
+extern int dhd_bus_interface(struct dhd_bus *bus, uint arg, void* arg2);
+int
+dhd_prot_ioctl(dhd_pub_t *dhd, int ifidx, wl_ioctl_t * ioc, void * buf, int len)
+{
+ dhd_prot_t *prot = dhd->prot;
+ int ret = -1;
+
+ if (dhd->busstate == DHD_BUS_DOWN) {
+ DHD_ERROR(("%s : bus is down. we have nothing to do\n", __FUNCTION__));
+ return ret;
+ }
+ dhd_os_proto_block(dhd);
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ ASSERT(len <= WLC_IOCTL_MAXLEN);
+
+ if (len > WLC_IOCTL_MAXLEN)
+ goto done;
+
+ if (prot->pending == TRUE) {
+ DHD_TRACE(("CDC packet is pending!!!! cmd=0x%x (%lu) lastcmd=0x%x (%lu)\n",
+ ioc->cmd, (unsigned long)ioc->cmd, prot->lastcmd,
+ (unsigned long)prot->lastcmd));
+ if ((ioc->cmd == WLC_SET_VAR) || (ioc->cmd == WLC_GET_VAR)) {
+ DHD_TRACE(("iovar cmd=%s\n", (char*)buf));
+ }
+ goto done;
+ }
+
+ prot->pending = TRUE;
+ prot->lastcmd = ioc->cmd;
+ if (ioc->set)
+ ret = dhdcdc_set_ioctl(dhd, ifidx, ioc->cmd, buf, len);
+ else {
+ ret = dhdcdc_query_ioctl(dhd, ifidx, ioc->cmd, buf, len);
+ if (ret > 0)
+ ioc->used = ret - sizeof(cdc_ioctl_t);
+ }
+
+ /* Too many programs assume ioctl() returns 0 on success */
+ if (ret >= 0)
+ ret = 0;
+ else {
+ cdc_ioctl_t *msg = &prot->msg;
+ ioc->needed = ltoh32(msg->len); /* len == needed when set/query fails from dongle */
+ }
+
+ /* Intercept the wme_dp ioctl here */
+ if ((!ret) && (ioc->cmd == WLC_SET_VAR) && (!strcmp(buf, "wme_dp"))) {
+ int slen, val = 0;
+
+ slen = strlen("wme_dp") + 1;
+ if (len >= (int)(slen + sizeof(int)))
+ bcopy(((char *)buf + slen), &val, sizeof(int));
+ dhd->wme_dp = (uint8) ltoh32(val);
+ }
+
+ prot->pending = FALSE;
+
+done:
+ dhd_os_proto_unblock(dhd);
+
+ return ret;
+}
+
+int
+dhd_prot_iovar_op(dhd_pub_t *dhdp, const char *name,
+ void *params, int plen, void *arg, int len, bool set)
+{
+ return BCME_UNSUPPORTED;
+}
+
+void
+dhd_prot_dump(dhd_pub_t *dhdp, struct bcmstrbuf *strbuf)
+{
+ bcm_bprintf(strbuf, "Protocol CDC: reqid %d\n", dhdp->prot->reqid);
+}
+
+
+void
+dhd_prot_hdrpush(dhd_pub_t *dhd, int ifidx, void *pktbuf)
+{
+#ifdef BDC
+ struct bdc_header *h;
+#endif /* BDC */
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+#ifdef BDC
+ /* Push BDC header used to convey priority for buses that don't */
+
+
+ PKTPUSH(dhd->osh, pktbuf, BDC_HEADER_LEN);
+
+ h = (struct bdc_header *)PKTDATA(dhd->osh, pktbuf);
+
+ h->flags = (BDC_PROTO_VER << BDC_FLAG_VER_SHIFT);
+ if (PKTSUMNEEDED(pktbuf))
+ h->flags |= BDC_FLAG_SUM_NEEDED;
+
+
+ h->priority = (PKTPRIO(pktbuf) & BDC_PRIORITY_MASK);
+ h->flags2 = 0;
+ h->rssi = 0;
+#endif /* BDC */
+ BDC_SET_IF_IDX(h, ifidx);
+}
+
+
+bool
+dhd_proto_fcinfo(dhd_pub_t *dhd, void *pktbuf, uint8 *fcbits)
+{
+#ifdef BDC
+ struct bdc_header *h;
+
+ if (PKTLEN(dhd->osh, pktbuf) < BDC_HEADER_LEN) {
+ DHD_ERROR(("%s: rx data too short (%d < %d)\n",
+ __FUNCTION__, PKTLEN(dhd->osh, pktbuf), BDC_HEADER_LEN));
+ return BCME_ERROR;
+ }
+
+ h = (struct bdc_header *)PKTDATA(dhd->osh, pktbuf);
+
+ *fcbits = h->priority >> BDC_PRIORITY_FC_SHIFT;
+ if ((h->flags2 & BDC_FLAG2_FC_FLAG) == BDC_FLAG2_FC_FLAG)
+ return TRUE;
+#endif
+ return FALSE;
+}
+
+
+int
+dhd_prot_hdrpull(dhd_pub_t *dhd, int *ifidx, void *pktbuf)
+{
+#ifdef BDC
+ struct bdc_header *h;
+#endif
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+#ifdef BDC
+ /* Pop BDC header used to convey priority for buses that don't */
+
+ if (PKTLEN(dhd->osh, pktbuf) < BDC_HEADER_LEN) {
+ DHD_ERROR(("%s: rx data too short (%d < %d)\n", __FUNCTION__,
+ PKTLEN(dhd->osh, pktbuf), BDC_HEADER_LEN));
+ return BCME_ERROR;
+ }
+
+ h = (struct bdc_header *)PKTDATA(dhd->osh, pktbuf);
+
+ if ((*ifidx = BDC_GET_IF_IDX(h)) >= DHD_MAX_IFS) {
+ DHD_ERROR(("%s: rx data ifnum out of range (%d)\n",
+ __FUNCTION__, *ifidx));
+ return BCME_ERROR;
+ }
+
+ if (((h->flags & BDC_FLAG_VER_MASK) >> BDC_FLAG_VER_SHIFT) != BDC_PROTO_VER) {
+ DHD_ERROR(("%s: non-BDC packet received, flags 0x%x\n",
+ dhd_ifname(dhd, *ifidx), h->flags));
+ return BCME_ERROR;
+ }
+
+ if (h->flags & BDC_FLAG_SUM_GOOD) {
+ DHD_INFO(("%s: BDC packet received with good rx-csum, flags 0x%x\n",
+ dhd_ifname(dhd, *ifidx), h->flags));
+ PKTSETSUMGOOD(pktbuf, TRUE);
+ }
+
+ PKTSETPRIO(pktbuf, (h->priority & BDC_PRIORITY_MASK));
+
+ PKTPULL(dhd->osh, pktbuf, BDC_HEADER_LEN);
+#endif /* BDC */
+
+ return 0;
+}
+
+int
+dhd_prot_attach(dhd_pub_t *dhd)
+{
+ dhd_prot_t *cdc;
+
+#ifndef DHD_USE_STATIC_BUF
+ if (!(cdc = (dhd_prot_t *)MALLOC(dhd->osh, sizeof(dhd_prot_t)))) {
+ DHD_ERROR(("%s: kmalloc failed\n", __FUNCTION__));
+ goto fail;
+ }
+#else
+ if (!(cdc = (dhd_prot_t *)dhd_os_prealloc(DHD_PREALLOC_PROT, sizeof(dhd_prot_t)))) {
+ DHD_ERROR(("%s: kmalloc failed\n", __FUNCTION__));
+ goto fail;
+ }
+#endif /* DHD_USE_STATIC_BUF */
+ memset(cdc, 0, sizeof(dhd_prot_t));
+
+ /* ensure that the msg buf directly follows the cdc msg struct */
+ if ((uintptr)(&cdc->msg + 1) != (uintptr)cdc->buf) {
+ DHD_ERROR(("dhd_prot_t is not correctly defined\n"));
+ goto fail;
+ }
+
+ dhd->prot = cdc;
+#ifdef BDC
+ dhd->hdrlen += BDC_HEADER_LEN;
+#endif
+ dhd->maxctl = WLC_IOCTL_MAXLEN + sizeof(cdc_ioctl_t) + ROUND_UP_MARGIN;
+ return 0;
+
+fail:
+#ifndef DHD_USE_STATIC_BUF
+ if (cdc != NULL)
+ MFREE(dhd->osh, cdc, sizeof(dhd_prot_t));
+#endif
+ return BCME_NOMEM;
+}
+
+/* ~NOTE~ What if another thread is waiting on the semaphore? Holding it? */
+void
+dhd_prot_detach(dhd_pub_t *dhd)
+{
+#ifndef DHD_USE_STATIC_BUF
+ MFREE(dhd->osh, dhd->prot, sizeof(dhd_prot_t));
+#endif
+ dhd->prot = NULL;
+}
+
+void
+dhd_prot_dstats(dhd_pub_t *dhd)
+{
+ /* No stats from dongle added yet, copy bus stats */
+ dhd->dstats.tx_packets = dhd->tx_packets;
+ dhd->dstats.tx_errors = dhd->tx_errors;
+ dhd->dstats.rx_packets = dhd->rx_packets;
+ dhd->dstats.rx_errors = dhd->rx_errors;
+ dhd->dstats.rx_dropped = dhd->rx_dropped;
+ dhd->dstats.multicast = dhd->rx_multicast;
+ return;
+}
+
+int
+dhd_prot_init(dhd_pub_t *dhd)
+{
+ int ret = 0;
+ char buf[128];
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ dhd_os_proto_block(dhd);
+
+ /* Get the device MAC address */
+ strcpy(buf, "cur_etheraddr");
+ ret = dhdcdc_query_ioctl(dhd, 0, WLC_GET_VAR, buf, sizeof(buf));
+ if (ret < 0) {
+ dhd_os_proto_unblock(dhd);
+ return ret;
+ }
+ memcpy(dhd->mac.octet, buf, ETHER_ADDR_LEN);
+
+ dhd_os_proto_unblock(dhd);
+
+#ifdef EMBEDDED_PLATFORM
+ ret = dhd_preinit_ioctls(dhd);
+#endif /* EMBEDDED_PLATFORM */
+
+ /* Always assumes wl for now */
+ dhd->iswl = TRUE;
+
+ return ret;
+}
+
+void
+dhd_prot_stop(dhd_pub_t *dhd)
+{
+ /* Nothing to do for CDC */
+}
diff --git a/drivers/net/wireless/bcm4329/dhd_common.c b/drivers/net/wireless/bcm4329/dhd_common.c
new file mode 100644
index 0000000..4331d39
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dhd_common.c
@@ -0,0 +1,2323 @@
+/*
+ * Broadcom Dongle Host Driver (DHD), common DHD core.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhd_common.c,v 1.5.6.8.2.6.6.69.4.20 2010/12/20 23:37:28 Exp $
+ */
+#include <typedefs.h>
+#include <osl.h>
+
+#include <epivers.h>
+#include <bcmutils.h>
+
+#include <bcmendian.h>
+#include <dngl_stats.h>
+#include <dhd.h>
+#include <dhd_bus.h>
+#include <dhd_proto.h>
+#include <dhd_dbg.h>
+#include <msgtrace.h>
+
+#include <wlioctl.h>
+
+#ifdef SET_RANDOM_MAC_SOFTAP
+#include <linux/random.h>
+#include <linux/jiffies.h>
+#endif
+
+#ifdef GET_CUSTOM_MAC_ENABLE
+int wifi_get_mac_addr(unsigned char *buf);
+#endif /* GET_CUSTOM_MAC_ENABLE */
+
+int dhd_msg_level;
+
+#include <wl_iw.h>
+
+char fw_path[MOD_PARAM_PATHLEN];
+char nv_path[MOD_PARAM_PATHLEN];
+
+/* Last connection success/failure status */
+uint32 dhd_conn_event;
+uint32 dhd_conn_status;
+uint32 dhd_conn_reason;
+
+#define htod32(i) i
+#define htod16(i) i
+#define dtoh32(i) i
+#define dtoh16(i) i
+
+extern int dhdcdc_set_ioctl(dhd_pub_t *dhd, int ifidx, uint cmd, void *buf, uint len);
+extern void dhd_ind_scan_confirm(void *h, bool status);
+extern int dhd_wl_ioctl(dhd_pub_t *dhd, uint cmd, char *buf, uint buflen);
+void dhd_iscan_lock(void);
+void dhd_iscan_unlock(void);
+
+#if defined(SOFTAP)
+extern bool ap_fw_loaded;
+#endif
+#if defined(KEEP_ALIVE)
+int dhd_keep_alive_onoff(dhd_pub_t *dhd, int ka_on);
+#endif /* KEEP_ALIVE */
+
+/* Packet alignment for most efficient SDIO (can change based on platform) */
+#ifndef DHD_SDALIGN
+#define DHD_SDALIGN 32
+#endif
+#if !ISPOWEROF2(DHD_SDALIGN)
+#error DHD_SDALIGN is not a power of 2!
+#endif
+
+#ifdef DHD_DEBUG
+const char dhd_version[] = "Dongle Host Driver, version " EPI_VERSION_STR "\nCompiled on "
+ __DATE__ " at " __TIME__;
+#else
+const char dhd_version[] = "Dongle Host Driver, version " EPI_VERSION_STR;
+#endif
+
+void dhd_set_timer(void *bus, uint wdtick);
+
+/* IOVar table */
+enum {
+ IOV_VERSION = 1,
+ IOV_MSGLEVEL,
+ IOV_BCMERRORSTR,
+ IOV_BCMERROR,
+ IOV_WDTICK,
+ IOV_DUMP,
+#ifdef DHD_DEBUG
+ IOV_CONS,
+ IOV_DCONSOLE_POLL,
+#endif
+ IOV_CLEARCOUNTS,
+ IOV_LOGDUMP,
+ IOV_LOGCAL,
+ IOV_LOGSTAMP,
+ IOV_GPIOOB,
+ IOV_IOCTLTIMEOUT,
+ IOV_LAST
+};
+
+const bcm_iovar_t dhd_iovars[] = {
+ {"version", IOV_VERSION, 0, IOVT_BUFFER, sizeof(dhd_version) },
+#ifdef DHD_DEBUG
+ {"msglevel", IOV_MSGLEVEL, 0, IOVT_UINT32, 0 },
+#endif /* DHD_DEBUG */
+ {"bcmerrorstr", IOV_BCMERRORSTR, 0, IOVT_BUFFER, BCME_STRLEN },
+ {"bcmerror", IOV_BCMERROR, 0, IOVT_INT8, 0 },
+ {"wdtick", IOV_WDTICK, 0, IOVT_UINT32, 0 },
+ {"dump", IOV_DUMP, 0, IOVT_BUFFER, DHD_IOCTL_MAXLEN },
+#ifdef DHD_DEBUG
+ {"dconpoll", IOV_DCONSOLE_POLL, 0, IOVT_UINT32, 0 },
+ {"cons", IOV_CONS, 0, IOVT_BUFFER, 0 },
+#endif
+ {"clearcounts", IOV_CLEARCOUNTS, 0, IOVT_VOID, 0 },
+ {"gpioob", IOV_GPIOOB, 0, IOVT_UINT32, 0 },
+ {"ioctl_timeout", IOV_IOCTLTIMEOUT, 0, IOVT_UINT32, 0 },
+ {NULL, 0, 0, 0, 0 }
+};
+
+void
+dhd_common_init(void)
+{
+ /* Init global variables at run-time, not as part of the declaration.
+ * This is required to support init/de-init of the driver. Initialization
+ * of globals as part of the declaration results in non-deterministic
+ * behaviour since the value of the globals may be different on the
+ * first time that the driver is initialized vs subsequent initializations.
+ */
+ dhd_msg_level = DHD_ERROR_VAL;
+#ifdef CONFIG_BCM4329_FW_PATH
+ strncpy(fw_path, CONFIG_BCM4329_FW_PATH, MOD_PARAM_PATHLEN-1);
+#else
+ fw_path[0] = '\0';
+#endif
+#ifdef CONFIG_BCM4329_NVRAM_PATH
+ strncpy(nv_path, CONFIG_BCM4329_NVRAM_PATH, MOD_PARAM_PATHLEN-1);
+#else
+ nv_path[0] = '\0';
+#endif
+}
+
+static int
+dhd_dump(dhd_pub_t *dhdp, char *buf, int buflen)
+{
+ char eabuf[ETHER_ADDR_STR_LEN];
+
+ struct bcmstrbuf b;
+ struct bcmstrbuf *strbuf = &b;
+
+ bcm_binit(strbuf, buf, buflen);
+
+ /* Base DHD info */
+ bcm_bprintf(strbuf, "%s\n", dhd_version);
+ bcm_bprintf(strbuf, "\n");
+ bcm_bprintf(strbuf, "pub.up %d pub.txoff %d pub.busstate %d\n",
+ dhdp->up, dhdp->txoff, dhdp->busstate);
+ bcm_bprintf(strbuf, "pub.hdrlen %d pub.maxctl %d pub.rxsz %d\n",
+ dhdp->hdrlen, dhdp->maxctl, dhdp->rxsz);
+ bcm_bprintf(strbuf, "pub.iswl %d pub.drv_version %ld pub.mac %s\n",
+ dhdp->iswl, dhdp->drv_version, bcm_ether_ntoa(&dhdp->mac, eabuf));
+ bcm_bprintf(strbuf, "pub.bcmerror %d tickcnt %d\n", dhdp->bcmerror, dhdp->tickcnt);
+
+ bcm_bprintf(strbuf, "dongle stats:\n");
+ bcm_bprintf(strbuf, "tx_packets %ld tx_bytes %ld tx_errors %ld tx_dropped %ld\n",
+ dhdp->dstats.tx_packets, dhdp->dstats.tx_bytes,
+ dhdp->dstats.tx_errors, dhdp->dstats.tx_dropped);
+ bcm_bprintf(strbuf, "rx_packets %ld rx_bytes %ld rx_errors %ld rx_dropped %ld\n",
+ dhdp->dstats.rx_packets, dhdp->dstats.rx_bytes,
+ dhdp->dstats.rx_errors, dhdp->dstats.rx_dropped);
+ bcm_bprintf(strbuf, "multicast %ld\n", dhdp->dstats.multicast);
+
+ bcm_bprintf(strbuf, "bus stats:\n");
+ bcm_bprintf(strbuf, "tx_packets %ld tx_multicast %ld tx_errors %ld\n",
+ dhdp->tx_packets, dhdp->tx_multicast, dhdp->tx_errors);
+ bcm_bprintf(strbuf, "tx_ctlpkts %ld tx_ctlerrs %ld\n",
+ dhdp->tx_ctlpkts, dhdp->tx_ctlerrs);
+ bcm_bprintf(strbuf, "rx_packets %ld rx_multicast %ld rx_errors %ld \n",
+ dhdp->rx_packets, dhdp->rx_multicast, dhdp->rx_errors);
+ bcm_bprintf(strbuf, "rx_ctlpkts %ld rx_ctlerrs %ld rx_dropped %ld rx_flushed %ld\n",
+ dhdp->rx_ctlpkts, dhdp->rx_ctlerrs, dhdp->rx_dropped, dhdp->rx_flushed);
+ bcm_bprintf(strbuf, "rx_readahead_cnt %ld tx_realloc %ld fc_packets %ld\n",
+ dhdp->rx_readahead_cnt, dhdp->tx_realloc, dhdp->fc_packets);
+ bcm_bprintf(strbuf, "wd_dpc_sched %ld\n", dhdp->wd_dpc_sched);
+ bcm_bprintf(strbuf, "\n");
+
+ /* Add any prot info */
+ dhd_prot_dump(dhdp, strbuf);
+ bcm_bprintf(strbuf, "\n");
+
+ /* Add any bus info */
+ dhd_bus_dump(dhdp, strbuf);
+
+ return (!strbuf->size ? BCME_BUFTOOSHORT : 0);
+}
+
+static int
+dhd_doiovar(dhd_pub_t *dhd_pub, const bcm_iovar_t *vi, uint32 actionid, const char *name,
+ void *params, int plen, void *arg, int len, int val_size)
+{
+ int bcmerror = 0;
+ int32 int_val = 0;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if ((bcmerror = bcm_iovar_lencheck(vi, arg, len, IOV_ISSET(actionid))) != 0)
+ goto exit;
+
+ if (plen >= (int)sizeof(int_val))
+ bcopy(params, &int_val, sizeof(int_val));
+
+ switch (actionid) {
+ case IOV_GVAL(IOV_VERSION):
+ /* Need to have checked buffer length */
+ strncpy((char*)arg, dhd_version, len);
+ break;
+
+ case IOV_GVAL(IOV_MSGLEVEL):
+ int_val = (int32)dhd_msg_level;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_MSGLEVEL):
+ dhd_msg_level = int_val;
+ break;
+
+ case IOV_GVAL(IOV_BCMERRORSTR):
+ strncpy((char *)arg, bcmerrorstr(dhd_pub->bcmerror), BCME_STRLEN);
+ ((char *)arg)[BCME_STRLEN - 1] = 0x00;
+ break;
+
+ case IOV_GVAL(IOV_BCMERROR):
+ int_val = (int32)dhd_pub->bcmerror;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_WDTICK):
+ int_val = (int32)dhd_watchdog_ms;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_WDTICK):
+ if (!dhd_pub->up) {
+ bcmerror = BCME_NOTUP;
+ break;
+ }
+ dhd_os_wd_timer(dhd_pub, (uint)int_val);
+ break;
+
+ case IOV_GVAL(IOV_DUMP):
+ bcmerror = dhd_dump(dhd_pub, arg, len);
+ break;
+
+#ifdef DHD_DEBUG
+ case IOV_GVAL(IOV_DCONSOLE_POLL):
+ int_val = (int32)dhd_console_ms;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_DCONSOLE_POLL):
+ dhd_console_ms = (uint)int_val;
+ break;
+
+ case IOV_SVAL(IOV_CONS):
+ if (len > 0)
+ bcmerror = dhd_bus_console_in(dhd_pub, arg, len - 1);
+ break;
+#endif
+
+ case IOV_SVAL(IOV_CLEARCOUNTS):
+ dhd_pub->tx_packets = dhd_pub->rx_packets = 0;
+ dhd_pub->tx_errors = dhd_pub->rx_errors = 0;
+ dhd_pub->tx_ctlpkts = dhd_pub->rx_ctlpkts = 0;
+ dhd_pub->tx_ctlerrs = dhd_pub->rx_ctlerrs = 0;
+ dhd_pub->rx_dropped = 0;
+ dhd_pub->rx_readahead_cnt = 0;
+ dhd_pub->tx_realloc = 0;
+ dhd_pub->wd_dpc_sched = 0;
+ memset(&dhd_pub->dstats, 0, sizeof(dhd_pub->dstats));
+ dhd_bus_clearcounts(dhd_pub);
+ break;
+
+
+ case IOV_GVAL(IOV_IOCTLTIMEOUT): {
+ int_val = (int32)dhd_os_get_ioctl_resp_timeout();
+ bcopy(&int_val, arg, sizeof(int_val));
+ break;
+ }
+
+ case IOV_SVAL(IOV_IOCTLTIMEOUT): {
+ if (int_val <= 0)
+ bcmerror = BCME_BADARG;
+ else
+ dhd_os_set_ioctl_resp_timeout((unsigned int)int_val);
+ break;
+ }
+
+
+ default:
+ bcmerror = BCME_UNSUPPORTED;
+ break;
+ }
+
+exit:
+ return bcmerror;
+}
+
+/* Store the status of a connection attempt for later retrieval by an iovar */
+void
+dhd_store_conn_status(uint32 event, uint32 status, uint32 reason)
+{
+ /* Do not overwrite a WLC_E_PRUNE with a WLC_E_SET_SSID
+ * because an encryption/rsn mismatch results in both events, and
+ * the important information is in the WLC_E_PRUNE.
+ */
+ if (!(event == WLC_E_SET_SSID && status == WLC_E_STATUS_FAIL &&
+ dhd_conn_event == WLC_E_PRUNE)) {
+ dhd_conn_event = event;
+ dhd_conn_status = status;
+ dhd_conn_reason = reason;
+ }
+}
+
+bool
+dhd_prec_enq(dhd_pub_t *dhdp, struct pktq *q, void *pkt, int prec)
+{
+ void *p;
+ int eprec = -1; /* precedence to evict from */
+ bool discard_oldest;
+
+ /* Fast case, precedence queue is not full and we are also not
+ * exceeding total queue length
+ */
+ if (!pktq_pfull(q, prec) && !pktq_full(q)) {
+ pktq_penq(q, prec, pkt);
+ return TRUE;
+ }
+
+ /* Determine precedence from which to evict packet, if any */
+ if (pktq_pfull(q, prec))
+ eprec = prec;
+ else if (pktq_full(q)) {
+ p = pktq_peek_tail(q, &eprec);
+ ASSERT(p);
+ if (eprec > prec)
+ return FALSE;
+ }
+
+ /* Evict if needed */
+ if (eprec >= 0) {
+ /* Detect queueing to unconfigured precedence */
+ ASSERT(!pktq_pempty(q, eprec));
+ discard_oldest = AC_BITMAP_TST(dhdp->wme_dp, eprec);
+ if (eprec == prec && !discard_oldest)
+ return FALSE; /* refuse newer (incoming) packet */
+ /* Evict packet according to discard policy */
+ p = discard_oldest ? pktq_pdeq(q, eprec) : pktq_pdeq_tail(q, eprec);
+ if (p == NULL) {
+ DHD_ERROR(("%s: pktq_penq() failed, oldest %d.",
+ __FUNCTION__, discard_oldest));
+ ASSERT(p);
+ }
+
+ PKTFREE(dhdp->osh, p, TRUE);
+ }
+
+ /* Enqueue */
+ p = pktq_penq(q, prec, pkt);
+ if (p == NULL) {
+ DHD_ERROR(("%s: pktq_penq() failed.", __FUNCTION__));
+ ASSERT(p);
+ }
+
+ return TRUE;
+}
+
+static int
+dhd_iovar_op(dhd_pub_t *dhd_pub, const char *name,
+ void *params, int plen, void *arg, int len, bool set)
+{
+ int bcmerror = 0;
+ int val_size;
+ const bcm_iovar_t *vi = NULL;
+ uint32 actionid;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ ASSERT(name);
+ ASSERT(len >= 0);
+
+ /* Get MUST have return space */
+ ASSERT(set || (arg && len));
+
+ /* Set does NOT take qualifiers */
+ ASSERT(!set || (!params && !plen));
+
+ if ((vi = bcm_iovar_lookup(dhd_iovars, name)) == NULL) {
+ bcmerror = BCME_UNSUPPORTED;
+ goto exit;
+ }
+
+ DHD_CTL(("%s: %s %s, len %d plen %d\n", __FUNCTION__,
+ name, (set ? "set" : "get"), len, plen));
+
+ /* set up 'params' pointer in case this is a set command so that
+ * the convenience int and bool code can be common to set and get
+ */
+ if (params == NULL) {
+ params = arg;
+ plen = len;
+ }
+
+ if (vi->type == IOVT_VOID)
+ val_size = 0;
+ else if (vi->type == IOVT_BUFFER)
+ val_size = len;
+ else
+ /* all other types are integer sized */
+ val_size = sizeof(int);
+
+ actionid = set ? IOV_SVAL(vi->varid) : IOV_GVAL(vi->varid);
+ bcmerror = dhd_doiovar(dhd_pub, vi, actionid, name, params, plen, arg, len, val_size);
+
+exit:
+ return bcmerror;
+}
+
+int
+dhd_ioctl(dhd_pub_t *dhd_pub, dhd_ioctl_t *ioc, void *buf, uint buflen)
+{
+ int bcmerror = 0;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (!buf) return BCME_BADARG;
+
+ switch (ioc->cmd) {
+ case DHD_GET_MAGIC:
+ if (buflen < sizeof(int))
+ bcmerror = BCME_BUFTOOSHORT;
+ else
+ *(int*)buf = DHD_IOCTL_MAGIC;
+ break;
+
+ case DHD_GET_VERSION:
+ if (buflen < sizeof(int))
+ bcmerror = -BCME_BUFTOOSHORT;
+ else
+ *(int*)buf = DHD_IOCTL_VERSION;
+ break;
+
+ case DHD_GET_VAR:
+ case DHD_SET_VAR: {
+ char *arg;
+ uint arglen;
+
+ /* scan past the name to any arguments */
+ for (arg = buf, arglen = buflen; *arg && arglen; arg++, arglen--);
+
+ if (*arg) {
+ bcmerror = BCME_BUFTOOSHORT;
+ break;
+ }
+
+ /* account for the NUL terminator */
+ arg++, arglen--;
+
+ /* call with the appropriate arguments */
+ if (ioc->cmd == DHD_GET_VAR)
+ bcmerror = dhd_iovar_op(dhd_pub, buf, arg, arglen,
+ buf, buflen, IOV_GET);
+ else
+ bcmerror = dhd_iovar_op(dhd_pub, buf, NULL, 0, arg, arglen, IOV_SET);
+ if (bcmerror != BCME_UNSUPPORTED)
+ break;
+
+ /* not in generic table, try protocol module */
+ if (ioc->cmd == DHD_GET_VAR)
+ bcmerror = dhd_prot_iovar_op(dhd_pub, buf, arg,
+ arglen, buf, buflen, IOV_GET);
+ else
+ bcmerror = dhd_prot_iovar_op(dhd_pub, buf,
+ NULL, 0, arg, arglen, IOV_SET);
+ if (bcmerror != BCME_UNSUPPORTED)
+ break;
+
+ /* if still not found, try bus module */
+ if (ioc->cmd == DHD_GET_VAR)
+ bcmerror = dhd_bus_iovar_op(dhd_pub, buf,
+ arg, arglen, buf, buflen, IOV_GET);
+ else
+ bcmerror = dhd_bus_iovar_op(dhd_pub, buf,
+ NULL, 0, arg, arglen, IOV_SET);
+
+ break;
+ }
+
+ default:
+ bcmerror = BCME_UNSUPPORTED;
+ }
+
+ return bcmerror;
+}
+
+
+#ifdef SHOW_EVENTS
+static void
+wl_show_host_event(wl_event_msg_t *event, void *event_data)
+{
+ uint i, status, reason;
+ bool group = FALSE, flush_txq = FALSE, link = FALSE;
+ char *auth_str, *event_name;
+ uchar *buf;
+ char err_msg[256], eabuf[ETHER_ADDR_STR_LEN];
+ static struct {uint event; char *event_name;} event_names[] = {
+ {WLC_E_SET_SSID, "SET_SSID"},
+ {WLC_E_JOIN, "JOIN"},
+ {WLC_E_START, "START"},
+ {WLC_E_AUTH, "AUTH"},
+ {WLC_E_AUTH_IND, "AUTH_IND"},
+ {WLC_E_DEAUTH, "DEAUTH"},
+ {WLC_E_DEAUTH_IND, "DEAUTH_IND"},
+ {WLC_E_ASSOC, "ASSOC"},
+ {WLC_E_ASSOC_IND, "ASSOC_IND"},
+ {WLC_E_REASSOC, "REASSOC"},
+ {WLC_E_REASSOC_IND, "REASSOC_IND"},
+ {WLC_E_DISASSOC, "DISASSOC"},
+ {WLC_E_DISASSOC_IND, "DISASSOC_IND"},
+ {WLC_E_QUIET_START, "START_QUIET"},
+ {WLC_E_QUIET_END, "END_QUIET"},
+ {WLC_E_BEACON_RX, "BEACON_RX"},
+ {WLC_E_LINK, "LINK"},
+ {WLC_E_MIC_ERROR, "MIC_ERROR"},
+ {WLC_E_NDIS_LINK, "NDIS_LINK"},
+ {WLC_E_ROAM, "ROAM"},
+ {WLC_E_TXFAIL, "TXFAIL"},
+ {WLC_E_PMKID_CACHE, "PMKID_CACHE"},
+ {WLC_E_RETROGRADE_TSF, "RETROGRADE_TSF"},
+ {WLC_E_PRUNE, "PRUNE"},
+ {WLC_E_AUTOAUTH, "AUTOAUTH"},
+ {WLC_E_EAPOL_MSG, "EAPOL_MSG"},
+ {WLC_E_SCAN_COMPLETE, "SCAN_COMPLETE"},
+ {WLC_E_ADDTS_IND, "ADDTS_IND"},
+ {WLC_E_DELTS_IND, "DELTS_IND"},
+ {WLC_E_BCNSENT_IND, "BCNSENT_IND"},
+ {WLC_E_BCNRX_MSG, "BCNRX_MSG"},
+ {WLC_E_BCNLOST_MSG, "BCNLOST_MSG"},
+ {WLC_E_ROAM_PREP, "ROAM_PREP"},
+ {WLC_E_PFN_NET_FOUND, "PNO_NET_FOUND"},
+ {WLC_E_PFN_NET_LOST, "PNO_NET_LOST"},
+ {WLC_E_RESET_COMPLETE, "RESET_COMPLETE"},
+ {WLC_E_JOIN_START, "JOIN_START"},
+ {WLC_E_ROAM_START, "ROAM_START"},
+ {WLC_E_ASSOC_START, "ASSOC_START"},
+ {WLC_E_IBSS_ASSOC, "IBSS_ASSOC"},
+ {WLC_E_RADIO, "RADIO"},
+ {WLC_E_PSM_WATCHDOG, "PSM_WATCHDOG"},
+ {WLC_E_PROBREQ_MSG, "PROBREQ_MSG"},
+ {WLC_E_SCAN_CONFIRM_IND, "SCAN_CONFIRM_IND"},
+ {WLC_E_PSK_SUP, "PSK_SUP"},
+ {WLC_E_COUNTRY_CODE_CHANGED, "COUNTRY_CODE_CHANGED"},
+ {WLC_E_EXCEEDED_MEDIUM_TIME, "EXCEEDED_MEDIUM_TIME"},
+ {WLC_E_ICV_ERROR, "ICV_ERROR"},
+ {WLC_E_UNICAST_DECODE_ERROR, "UNICAST_DECODE_ERROR"},
+ {WLC_E_MULTICAST_DECODE_ERROR, "MULTICAST_DECODE_ERROR"},
+ {WLC_E_TRACE, "TRACE"},
+ {WLC_E_ACTION_FRAME, "ACTION FRAME"},
+ {WLC_E_ACTION_FRAME_COMPLETE, "ACTION FRAME TX COMPLETE"},
+ {WLC_E_IF, "IF"},
+ {WLC_E_RSSI, "RSSI"},
+ {WLC_E_PFN_SCAN_COMPLETE, "SCAN_COMPLETE"}
+ };
+ uint event_type, flags, auth_type, datalen;
+ event_type = ntoh32(event->event_type);
+ flags = ntoh16(event->flags);
+ status = ntoh32(event->status);
+ reason = ntoh32(event->reason);
+ auth_type = ntoh32(event->auth_type);
+ datalen = ntoh32(event->datalen);
+ /* debug dump of event messages */
+ sprintf(eabuf, "%02x:%02x:%02x:%02x:%02x:%02x",
+ (uchar)event->addr.octet[0]&0xff,
+ (uchar)event->addr.octet[1]&0xff,
+ (uchar)event->addr.octet[2]&0xff,
+ (uchar)event->addr.octet[3]&0xff,
+ (uchar)event->addr.octet[4]&0xff,
+ (uchar)event->addr.octet[5]&0xff);
+
+ event_name = "UNKNOWN";
+ for (i = 0; i < ARRAYSIZE(event_names); i++) {
+ if (event_names[i].event == event_type)
+ event_name = event_names[i].event_name;
+ }
+
+ DHD_EVENT(("EVENT: %s, event ID = %d\n", event_name, event_type));
+
+ if (flags & WLC_EVENT_MSG_LINK)
+ link = TRUE;
+ if (flags & WLC_EVENT_MSG_GROUP)
+ group = TRUE;
+ if (flags & WLC_EVENT_MSG_FLUSHTXQ)
+ flush_txq = TRUE;
+
+ switch (event_type) {
+ case WLC_E_START:
+ case WLC_E_DEAUTH:
+ case WLC_E_DISASSOC:
+ DHD_EVENT(("MACEVENT: %s, MAC %s\n", event_name, eabuf));
+ break;
+
+ case WLC_E_ASSOC_IND:
+ case WLC_E_REASSOC_IND:
+ DHD_EVENT(("MACEVENT: %s, MAC %s\n", event_name, eabuf));
+ break;
+
+ case WLC_E_ASSOC:
+ case WLC_E_REASSOC:
+ if (status == WLC_E_STATUS_SUCCESS) {
+ DHD_EVENT(("MACEVENT: %s, MAC %s, SUCCESS\n", event_name, eabuf));
+ } else if (status == WLC_E_STATUS_TIMEOUT) {
+ DHD_EVENT(("MACEVENT: %s, MAC %s, TIMEOUT\n", event_name, eabuf));
+ } else if (status == WLC_E_STATUS_FAIL) {
+ DHD_EVENT(("MACEVENT: %s, MAC %s, FAILURE, reason %d\n",
+ event_name, eabuf, (int)reason));
+ } else {
+ DHD_EVENT(("MACEVENT: %s, MAC %s, unexpected status %d\n",
+ event_name, eabuf, (int)status));
+ }
+ break;
+
+ case WLC_E_DEAUTH_IND:
+ case WLC_E_DISASSOC_IND:
+ DHD_EVENT(("MACEVENT: %s, MAC %s, reason %d\n", event_name, eabuf, (int)reason));
+ break;
+
+ case WLC_E_AUTH:
+ case WLC_E_AUTH_IND:
+ if (auth_type == DOT11_OPEN_SYSTEM)
+ auth_str = "Open System";
+ else if (auth_type == DOT11_SHARED_KEY)
+ auth_str = "Shared Key";
+ else {
+ sprintf(err_msg, "AUTH unknown: %d", (int)auth_type);
+ auth_str = err_msg;
+ }
+ if (event_type == WLC_E_AUTH_IND) {
+ DHD_EVENT(("MACEVENT: %s, MAC %s, %s\n", event_name, eabuf, auth_str));
+ } else if (status == WLC_E_STATUS_SUCCESS) {
+ DHD_EVENT(("MACEVENT: %s, MAC %s, %s, SUCCESS\n",
+ event_name, eabuf, auth_str));
+ } else if (status == WLC_E_STATUS_TIMEOUT) {
+ DHD_EVENT(("MACEVENT: %s, MAC %s, %s, TIMEOUT\n",
+ event_name, eabuf, auth_str));
+ } else if (status == WLC_E_STATUS_FAIL) {
+ DHD_EVENT(("MACEVENT: %s, MAC %s, %s, FAILURE, reason %d\n",
+ event_name, eabuf, auth_str, (int)reason));
+ }
+
+ break;
+
+ case WLC_E_JOIN:
+ case WLC_E_ROAM:
+ case WLC_E_SET_SSID:
+ if (status == WLC_E_STATUS_SUCCESS) {
+ DHD_EVENT(("MACEVENT: %s, MAC %s\n", event_name, eabuf));
+ } else if (status == WLC_E_STATUS_FAIL) {
+ DHD_EVENT(("MACEVENT: %s, failed\n", event_name));
+ } else if (status == WLC_E_STATUS_NO_NETWORKS) {
+ DHD_EVENT(("MACEVENT: %s, no networks found\n", event_name));
+ } else {
+ DHD_EVENT(("MACEVENT: %s, unexpected status %d\n",
+ event_name, (int)status));
+ }
+ break;
+
+ case WLC_E_BEACON_RX:
+ if (status == WLC_E_STATUS_SUCCESS) {
+ DHD_EVENT(("MACEVENT: %s, SUCCESS\n", event_name));
+ } else if (status == WLC_E_STATUS_FAIL) {
+ DHD_EVENT(("MACEVENT: %s, FAIL\n", event_name));
+ } else {
+ DHD_EVENT(("MACEVENT: %s, status %d\n", event_name, status));
+ }
+ break;
+
+ case WLC_E_LINK:
+ DHD_EVENT(("MACEVENT: %s %s\n", event_name, link?"UP":"DOWN"));
+ break;
+
+ case WLC_E_MIC_ERROR:
+ DHD_EVENT(("MACEVENT: %s, MAC %s, Group %d, Flush %d\n",
+ event_name, eabuf, group, flush_txq));
+ break;
+
+ case WLC_E_ICV_ERROR:
+ case WLC_E_UNICAST_DECODE_ERROR:
+ case WLC_E_MULTICAST_DECODE_ERROR:
+ DHD_EVENT(("MACEVENT: %s, MAC %s\n",
+ event_name, eabuf));
+ break;
+
+ case WLC_E_TXFAIL:
+ DHD_EVENT(("MACEVENT: %s, RA %s\n", event_name, eabuf));
+ break;
+
+ case WLC_E_SCAN_COMPLETE:
+ case WLC_E_PMKID_CACHE:
+ DHD_EVENT(("MACEVENT: %s\n", event_name));
+ break;
+
+ case WLC_E_PFN_NET_FOUND:
+ case WLC_E_PFN_NET_LOST:
+ case WLC_E_PFN_SCAN_COMPLETE:
+ DHD_EVENT(("PNOEVENT: %s\n", event_name));
+ break;
+
+ case WLC_E_PSK_SUP:
+ case WLC_E_PRUNE:
+ DHD_EVENT(("MACEVENT: %s, status %d, reason %d\n",
+ event_name, (int)status, (int)reason));
+ break;
+
+ case WLC_E_TRACE:
+ {
+ static uint32 seqnum_prev = 0;
+ msgtrace_hdr_t hdr;
+ uint32 nblost;
+ char *s, *p;
+
+ buf = (uchar *) event_data;
+ memcpy(&hdr, buf, MSGTRACE_HDRLEN);
+
+ if (hdr.version != MSGTRACE_VERSION) {
+ printf("\nMACEVENT: %s [unsupported version --> "
+ "dhd version:%d dongle version:%d]\n",
+ event_name, MSGTRACE_VERSION, hdr.version);
+ /* Reset datalen to avoid display below */
+ datalen = 0;
+ break;
+ }
+
+ /* There are 2 bytes available at the end of data */
+ buf[MSGTRACE_HDRLEN + ntoh16(hdr.len)] = '\0';
+
+ if (ntoh32(hdr.discarded_bytes) || ntoh32(hdr.discarded_printf)) {
+ printf("\nWLC_E_TRACE: [Discarded traces in dongle -->"
+ "discarded_bytes %d discarded_printf %d]\n",
+ ntoh32(hdr.discarded_bytes), ntoh32(hdr.discarded_printf));
+ }
+
+ nblost = ntoh32(hdr.seqnum) - seqnum_prev - 1;
+ if (nblost > 0) {
+ printf("\nWLC_E_TRACE: [Event lost --> seqnum %d nblost %d\n",
+ ntoh32(hdr.seqnum), nblost);
+ }
+ seqnum_prev = ntoh32(hdr.seqnum);
+
+ /* Display the trace buffer. Advance from \n to \n to avoid display big
+ * printf (issue with Linux printk )
+ */
+ p = (char *)&buf[MSGTRACE_HDRLEN];
+ while ((s = strstr(p, "\n")) != NULL) {
+ *s = '\0';
+ printf("%s\n", p);
+ p = s + 1;
+ }
+ printf("%s\n", p);
+
+ /* Reset datalen to avoid display below */
+ datalen = 0;
+ }
+ break;
+
+
+ case WLC_E_RSSI:
+ DHD_EVENT(("MACEVENT: %s %d\n", event_name, ntoh32(*((int *)event_data))));
+ break;
+
+ default:
+ DHD_EVENT(("MACEVENT: %s %d, MAC %s, status %d, reason %d, auth %d\n",
+ event_name, event_type, eabuf, (int)status, (int)reason,
+ (int)auth_type));
+ break;
+ }
+
+ /* show any appended data */
+ if (datalen) {
+ buf = (uchar *) event_data;
+ DHD_EVENT((" data (%d) : ", datalen));
+ for (i = 0; i < datalen; i++)
+ DHD_EVENT((" 0x%02x ", *buf++));
+ DHD_EVENT(("\n"));
+ }
+}
+#endif /* SHOW_EVENTS */
+
+int
+wl_host_event(struct dhd_info *dhd, int *ifidx, void *pktdata,
+ wl_event_msg_t *event, void **data_ptr)
+{
+ /* check whether packet is a BRCM event pkt */
+ bcm_event_t *pvt_data = (bcm_event_t *)pktdata;
+ char *event_data;
+ uint32 type, status;
+ uint16 flags;
+ int evlen;
+
+ if (bcmp(BRCM_OUI, &pvt_data->bcm_hdr.oui[0], DOT11_OUI_LEN)) {
+ DHD_ERROR(("%s: mismatched OUI, bailing\n", __FUNCTION__));
+ return (BCME_ERROR);
+ }
+
+ /* BRCM event pkt may be unaligned - use xxx_ua to load user_subtype. */
+ if (ntoh16_ua((void *)&pvt_data->bcm_hdr.usr_subtype) != BCMILCP_BCM_SUBTYPE_EVENT) {
+ DHD_ERROR(("%s: mismatched subtype, bailing\n", __FUNCTION__));
+ return (BCME_ERROR);
+ }
+
+ *data_ptr = &pvt_data[1];
+ event_data = *data_ptr;
+
+ /* memcpy since BRCM event pkt may be unaligned. */
+ memcpy(event, &pvt_data->event, sizeof(wl_event_msg_t));
+
+ type = ntoh32_ua((void *)&event->event_type);
+ flags = ntoh16_ua((void *)&event->flags);
+ status = ntoh32_ua((void *)&event->status);
+ evlen = ntoh32_ua((void *)&event->datalen) + sizeof(bcm_event_t);
+
+ switch (type) {
+ case WLC_E_IF:
+ {
+ dhd_if_event_t *ifevent = (dhd_if_event_t *)event_data;
+ DHD_TRACE(("%s: if event\n", __FUNCTION__));
+
+ if (ifevent->ifidx > 0 && ifevent->ifidx < DHD_MAX_IFS)
+ {
+ if (ifevent->action == WLC_E_IF_ADD)
+ dhd_add_if(dhd, ifevent->ifidx,
+ NULL, event->ifname,
+ pvt_data->eth.ether_dhost,
+ ifevent->flags, ifevent->bssidx);
+ else
+ dhd_del_if(dhd, ifevent->ifidx);
+ } else {
+ DHD_ERROR(("%s: Invalid ifidx %d for %s\n",
+ __FUNCTION__, ifevent->ifidx, event->ifname));
+ }
+ }
+ /* send up the if event: btamp user needs it */
+ *ifidx = dhd_ifname2idx(dhd, event->ifname);
+ /* push up to external supp/auth */
+ dhd_event(dhd, (char *)pvt_data, evlen, *ifidx);
+ break;
+
+
+#ifdef P2P
+ case WLC_E_NDIS_LINK:
+ break;
+#endif
+ /* fall through */
+ /* These are what external supplicant/authenticator wants */
+ case WLC_E_LINK:
+ case WLC_E_ASSOC_IND:
+ case WLC_E_REASSOC_IND:
+ case WLC_E_DISASSOC_IND:
+ case WLC_E_MIC_ERROR:
+ default:
+ /* Fall through: this should get _everything_ */
+
+ *ifidx = dhd_ifname2idx(dhd, event->ifname);
+ /* push up to external supp/auth */
+ dhd_event(dhd, (char *)pvt_data, evlen, *ifidx);
+ DHD_TRACE(("%s: MAC event %d, flags %x, status %x\n",
+ __FUNCTION__, type, flags, status));
+
+ /* put it back to WLC_E_NDIS_LINK */
+ if (type == WLC_E_NDIS_LINK) {
+ uint32 temp;
+
+ temp = ntoh32_ua((void *)&event->event_type);
+ DHD_TRACE(("Converted to WLC_E_LINK type %d\n", temp));
+
+ temp = ntoh32(WLC_E_NDIS_LINK);
+ memcpy((void *)(&pvt_data->event.event_type), &temp,
+ sizeof(pvt_data->event.event_type));
+ }
+ break;
+ }
+
+#ifdef SHOW_EVENTS
+ wl_show_host_event(event, event_data);
+#endif /* SHOW_EVENTS */
+
+ return (BCME_OK);
+}
+
+
+void
+wl_event_to_host_order(wl_event_msg_t *evt)
+{
+ /* Event struct members passed from dongle to host are stored in network
+ * byte order. Convert all members to host-order.
+ */
+ evt->event_type = ntoh32(evt->event_type);
+ evt->flags = ntoh16(evt->flags);
+ evt->status = ntoh32(evt->status);
+ evt->reason = ntoh32(evt->reason);
+ evt->auth_type = ntoh32(evt->auth_type);
+ evt->datalen = ntoh32(evt->datalen);
+ evt->version = ntoh16(evt->version);
+}
+
+void print_buf(void *pbuf, int len, int bytes_per_line)
+{
+ int i, j = 0;
+ unsigned char *buf = pbuf;
+
+ if (bytes_per_line == 0) {
+ bytes_per_line = len;
+ }
+
+ for (i = 0; i < len; i++) {
+ printf("%2.2x", *buf++);
+ j++;
+ if (j == bytes_per_line) {
+ printf("\n");
+ j = 0;
+ } else {
+ printf(":");
+ }
+ }
+ printf("\n");
+}
+
+#define strtoul(nptr, endptr, base) bcm_strtoul((nptr), (endptr), (base))
+
+#ifdef PKT_FILTER_SUPPORT
+/* Convert user's input in hex pattern to byte-size mask */
+static int
+wl_pattern_atoh(char *src, char *dst)
+{
+ int i;
+ if (strncmp(src, "0x", 2) != 0 &&
+ strncmp(src, "0X", 2) != 0) {
+ DHD_ERROR(("Mask invalid format. Needs to start with 0x\n"));
+ return -1;
+ }
+ src = src + 2; /* Skip past 0x */
+ if (strlen(src) % 2 != 0) {
+ DHD_ERROR(("Mask invalid format. Needs to be of even length\n"));
+ return -1;
+ }
+ for (i = 0; *src != '\0'; i++) {
+ char num[3];
+ strncpy(num, src, 2);
+ num[2] = '\0';
+ dst[i] = (uint8)strtoul(num, NULL, 16);
+ src += 2;
+ }
+ return i;
+}
+
+void
+dhd_pktfilter_offload_enable(dhd_pub_t * dhd, char *arg, int enable, int master_mode)
+{
+ char *argv[8];
+ int i = 0;
+ const char *str;
+ int buf_len;
+ int str_len;
+ char *arg_save = 0, *arg_org = 0;
+ int rc;
+ char buf[128];
+ wl_pkt_filter_enable_t enable_parm;
+ wl_pkt_filter_enable_t * pkt_filterp;
+
+ if (!(arg_save = MALLOC(dhd->osh, strlen(arg) + 1))) {
+ DHD_ERROR(("%s: kmalloc failed\n", __FUNCTION__));
+ goto fail;
+ }
+ arg_org = arg_save;
+ memcpy(arg_save, arg, strlen(arg) + 1);
+
+ argv[i] = bcmstrtok(&arg_save, " ", 0);
+
+ i = 0;
+ if (NULL == argv[i]) {
+ DHD_ERROR(("No args provided\n"));
+ goto fail;
+ }
+
+ str = "pkt_filter_enable";
+ str_len = strlen(str);
+ strncpy(buf, str, str_len);
+ buf[str_len] = '\0';
+ buf_len = str_len + 1;
+
+ pkt_filterp = (wl_pkt_filter_enable_t *)(buf + str_len + 1);
+
+ /* Parse packet filter id. */
+ enable_parm.id = htod32(strtoul(argv[i], NULL, 0));
+
+ /* Parse enable/disable value. */
+ enable_parm.enable = htod32(enable);
+
+ buf_len += sizeof(enable_parm);
+ memcpy((char *)pkt_filterp,
+ &enable_parm,
+ sizeof(enable_parm));
+
+ /* Enable/disable the specified filter. */
+ rc = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, buf, buf_len);
+ rc = rc >= 0 ? 0 : rc;
+ if (rc)
+ DHD_TRACE(("%s: failed to add pktfilter %s, retcode = %d\n",
+ __FUNCTION__, arg, rc));
+ else
+ DHD_TRACE(("%s: successfully added pktfilter %s\n",
+ __FUNCTION__, arg));
+
+ /* Contorl the master mode */
+ bcm_mkiovar("pkt_filter_mode", (char *)&master_mode, 4, buf, sizeof(buf));
+ rc = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, buf, sizeof(buf));
+ rc = rc >= 0 ? 0 : rc;
+ if (rc)
+ DHD_TRACE(("%s: failed to add pktfilter %s, retcode = %d\n",
+ __FUNCTION__, arg, rc));
+
+fail:
+ if (arg_org)
+ MFREE(dhd->osh, arg_org, strlen(arg) + 1);
+}
+
+void
+dhd_pktfilter_offload_set(dhd_pub_t * dhd, char *arg)
+{
+ const char *str;
+ wl_pkt_filter_t pkt_filter;
+ wl_pkt_filter_t *pkt_filterp;
+ int buf_len;
+ int str_len;
+ int rc;
+ uint32 mask_size;
+ uint32 pattern_size;
+ char *argv[8], * buf = 0;
+ int i = 0;
+ char *arg_save = 0, *arg_org = 0;
+#define BUF_SIZE 2048
+
+ if (!(arg_save = MALLOC(dhd->osh, strlen(arg) + 1))) {
+ DHD_ERROR(("%s: kmalloc failed\n", __FUNCTION__));
+ goto fail;
+ }
+
+ arg_org = arg_save;
+
+ if (!(buf = MALLOC(dhd->osh, BUF_SIZE))) {
+ DHD_ERROR(("%s: kmalloc failed\n", __FUNCTION__));
+ goto fail;
+ }
+
+ memcpy(arg_save, arg, strlen(arg) + 1);
+
+ if (strlen(arg) > BUF_SIZE) {
+ DHD_ERROR(("Not enough buffer %d < %d\n", (int)strlen(arg), (int)sizeof(buf)));
+ goto fail;
+ }
+
+ argv[i] = bcmstrtok(&arg_save, " ", 0);
+ while (argv[i++])
+ argv[i] = bcmstrtok(&arg_save, " ", 0);
+
+ i = 0;
+ if (NULL == argv[i]) {
+ DHD_ERROR(("No args provided\n"));
+ goto fail;
+ }
+
+ str = "pkt_filter_add";
+ str_len = strlen(str);
+ strncpy(buf, str, str_len);
+ buf[ str_len ] = '\0';
+ buf_len = str_len + 1;
+
+ pkt_filterp = (wl_pkt_filter_t *) (buf + str_len + 1);
+
+ /* Parse packet filter id. */
+ pkt_filter.id = htod32(strtoul(argv[i], NULL, 0));
+
+ if (NULL == argv[++i]) {
+ DHD_ERROR(("Polarity not provided\n"));
+ goto fail;
+ }
+
+ /* Parse filter polarity. */
+ pkt_filter.negate_match = htod32(strtoul(argv[i], NULL, 0));
+
+ if (NULL == argv[++i]) {
+ DHD_ERROR(("Filter type not provided\n"));
+ goto fail;
+ }
+
+ /* Parse filter type. */
+ pkt_filter.type = htod32(strtoul(argv[i], NULL, 0));
+
+ if (NULL == argv[++i]) {
+ DHD_ERROR(("Offset not provided\n"));
+ goto fail;
+ }
+
+ /* Parse pattern filter offset. */
+ pkt_filter.u.pattern.offset = htod32(strtoul(argv[i], NULL, 0));
+
+ if (NULL == argv[++i]) {
+ DHD_ERROR(("Bitmask not provided\n"));
+ goto fail;
+ }
+
+ /* Parse pattern filter mask. */
+ mask_size =
+ htod32(wl_pattern_atoh(argv[i], (char *) pkt_filterp->u.pattern.mask_and_pattern));
+
+ if (NULL == argv[++i]) {
+ DHD_ERROR(("Pattern not provided\n"));
+ goto fail;
+ }
+
+ /* Parse pattern filter pattern. */
+ pattern_size =
+ htod32(wl_pattern_atoh(argv[i],
+ (char *) &pkt_filterp->u.pattern.mask_and_pattern[mask_size]));
+
+ if (mask_size != pattern_size) {
+ DHD_ERROR(("Mask and pattern not the same size\n"));
+ goto fail;
+ }
+
+ pkt_filter.u.pattern.size_bytes = mask_size;
+ buf_len += WL_PKT_FILTER_FIXED_LEN;
+ buf_len += (WL_PKT_FILTER_PATTERN_FIXED_LEN + 2 * mask_size);
+
+ /* Keep-alive attributes are set in local variable (keep_alive_pkt), and
+ ** then memcpy'ed into buffer (keep_alive_pktp) since there is no
+ ** guarantee that the buffer is properly aligned.
+ */
+ memcpy((char *)pkt_filterp,
+ &pkt_filter,
+ WL_PKT_FILTER_FIXED_LEN + WL_PKT_FILTER_PATTERN_FIXED_LEN);
+
+ rc = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, buf, buf_len);
+ rc = rc >= 0 ? 0 : rc;
+
+ if (rc)
+ DHD_TRACE(("%s: failed to add pktfilter %s, retcode = %d\n",
+ __FUNCTION__, arg, rc));
+ else
+ DHD_TRACE(("%s: successfully added pktfilter %s\n",
+ __FUNCTION__, arg));
+
+fail:
+ if (arg_org)
+ MFREE(dhd->osh, arg_org, strlen(arg) + 1);
+
+ if (buf)
+ MFREE(dhd->osh, buf, BUF_SIZE);
+}
+#endif
+
+#ifdef ARP_OFFLOAD_SUPPORT
+void
+dhd_arp_offload_set(dhd_pub_t * dhd, int arp_mode)
+{
+ char iovbuf[32];
+ int retcode;
+
+ bcm_mkiovar("arp_ol", (char *)&arp_mode, 4, iovbuf, sizeof(iovbuf));
+ retcode = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+ retcode = retcode >= 0 ? 0 : retcode;
+ if (retcode)
+ DHD_TRACE(("%s: failed to set ARP offload mode to 0x%x, retcode = %d\n",
+ __FUNCTION__, arp_mode, retcode));
+ else
+ DHD_TRACE(("%s: successfully set ARP offload mode to 0x%x\n",
+ __FUNCTION__, arp_mode));
+}
+
+void
+dhd_arp_offload_enable(dhd_pub_t * dhd, int arp_enable)
+{
+ char iovbuf[32];
+ int retcode;
+
+ bcm_mkiovar("arpoe", (char *)&arp_enable, 4, iovbuf, sizeof(iovbuf));
+ retcode = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+ retcode = retcode >= 0 ? 0 : retcode;
+ if (retcode)
+ DHD_TRACE(("%s: failed to enabe ARP offload to %d, retcode = %d\n",
+ __FUNCTION__, arp_enable, retcode));
+ else
+ DHD_TRACE(("%s: successfully enabed ARP offload to %d\n",
+ __FUNCTION__, arp_enable));
+}
+#endif
+
+int
+dhd_preinit_ioctls(dhd_pub_t *dhd)
+{
+ char iovbuf[WL_EVENTING_MASK_LEN + 12]; /* Room for "event_msgs" + '\0' + bitvec */
+ uint up = 0;
+ char buf[128], *ptr;
+ uint power_mode = PM_FAST;
+ uint32 dongle_align = DHD_SDALIGN;
+ uint32 glom = 0;
+ uint bcn_timeout = 4;
+ int scan_assoc_time = 40;
+ int scan_unassoc_time = 40;
+ uint32 listen_interval = LISTEN_INTERVAL; /* Default Listen Interval in Beacons */
+#if defined(SOFTAP)
+ uint dtim = 1;
+#endif
+ int ret = 0;
+#ifdef GET_CUSTOM_MAC_ENABLE
+ struct ether_addr ea_addr;
+#endif /* GET_CUSTOM_MAC_ENABLE */
+
+ dhd_os_proto_block(dhd);
+
+#ifdef GET_CUSTOM_MAC_ENABLE
+ /*
+ ** Read MAC address from external customer place
+ ** NOTE that default mac address has to be present in otp or nvram file
+ ** to bring up firmware but unique per board mac address maybe provided
+ ** by customer code
+ */
+ ret = dhd_custom_get_mac_address(ea_addr.octet);
+ if (!ret) {
+ bcm_mkiovar("cur_etheraddr", (void *)&ea_addr, ETHER_ADDR_LEN, buf, sizeof(buf));
+ ret = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, buf, sizeof(buf));
+ if (ret < 0) {
+ DHD_ERROR(("%s: can't set MAC address , error=%d\n", __FUNCTION__, ret));
+ } else
+ memcpy(dhd->mac.octet, (void *)&ea_addr, ETHER_ADDR_LEN);
+ }
+#endif /* GET_CUSTOM_MAC_ENABLE */
+
+#ifdef SET_RANDOM_MAC_SOFTAP
+ if (strstr(fw_path, "apsta") != NULL) {
+ uint rand_mac;
+
+ srandom32((uint)jiffies);
+ rand_mac = random32();
+ iovbuf[0] = 0x02; /* locally administered bit */
+ iovbuf[1] = 0x1A;
+ iovbuf[2] = 0x11;
+ iovbuf[3] = (unsigned char)(rand_mac & 0x0F) | 0xF0;
+ iovbuf[4] = (unsigned char)(rand_mac >> 8);
+ iovbuf[5] = (unsigned char)(rand_mac >> 16);
+
+ printk("Broadcom Dongle Host Driver mac=%02x:%02x:%02x:%02x:%02x:%02x\n",
+ iovbuf[0], iovbuf[1], iovbuf[2], iovbuf[3], iovbuf[4], iovbuf[5]);
+
+ bcm_mkiovar("cur_etheraddr", (void *)iovbuf, ETHER_ADDR_LEN, buf, sizeof(buf));
+ ret = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, buf, sizeof(buf));
+ if (ret < 0) {
+ DHD_ERROR(("%s: can't set MAC address , error=%d\n", __FUNCTION__, ret));
+ } else
+ memcpy(dhd->mac.octet, iovbuf, ETHER_ADDR_LEN);
+ }
+#endif /* SET_RANDOM_MAC_SOFTAP */
+
+ /* Set Country code */
+ if (dhd->country_code[0] != 0) {
+ if (dhdcdc_set_ioctl(dhd, 0, WLC_SET_COUNTRY,
+ dhd->country_code, sizeof(dhd->country_code)) < 0) {
+ DHD_ERROR(("%s: country code setting failed\n", __FUNCTION__));
+ }
+ }
+
+ /* Set Listen Interval */
+ bcm_mkiovar("assoc_listen", (char *)&listen_interval, 4, iovbuf, sizeof(iovbuf));
+ if ((ret = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf))) < 0)
+ DHD_ERROR(("%s assoc_listen failed %d\n", __FUNCTION__, ret));
+
+ /* query for 'ver' to get version info from firmware */
+ memset(buf, 0, sizeof(buf));
+ ptr = buf;
+ bcm_mkiovar("ver", 0, 0, buf, sizeof(buf));
+ dhdcdc_query_ioctl(dhd, 0, WLC_GET_VAR, buf, sizeof(buf));
+ bcmstrtok(&ptr, "\n", 0);
+ /* Print fw version info */
+ DHD_ERROR(("Firmware version = %s\n", buf));
+
+ /* Set PowerSave mode */
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_PM, (char *)&power_mode, sizeof(power_mode));
+
+ /* Match Host and Dongle rx alignment */
+ bcm_mkiovar("bus:txglomalign", (char *)&dongle_align, 4, iovbuf, sizeof(iovbuf));
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+
+ /* disable glom option per default */
+ bcm_mkiovar("bus:txglom", (char *)&glom, 4, iovbuf, sizeof(iovbuf));
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+
+ /* Setup timeout if Beacons are lost and roam is off to report link down */
+ bcm_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf, sizeof(iovbuf));
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+
+ /* Enable/Disable build-in roaming to allowed ext supplicant to take of romaing */
+ bcm_mkiovar("roam_off", (char *)&dhd_roam, 4, iovbuf, sizeof(iovbuf));
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+
+#if defined(SOFTAP)
+ if (ap_fw_loaded == TRUE) {
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_DTIMPRD, (char *)&dtim, sizeof(dtim));
+ }
+#endif
+
+ if (dhd_roam == 0)
+ {
+ /* set internal roaming roaming parameters */
+ int roam_scan_period = 30; /* in sec */
+ int roam_fullscan_period = 120; /* in sec */
+ int roam_trigger = -85;
+ int roam_delta = 15;
+ int band;
+ int band_temp_set = WLC_BAND_2G;
+
+ if (dhdcdc_set_ioctl(dhd, 0, WLC_SET_ROAM_SCAN_PERIOD, \
+ (char *)&roam_scan_period, sizeof(roam_scan_period)) < 0)
+ DHD_ERROR(("%s: roam scan setup failed\n", __FUNCTION__));
+
+ bcm_mkiovar("fullroamperiod", (char *)&roam_fullscan_period, \
+ 4, iovbuf, sizeof(iovbuf));
+ if (dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, \
+ iovbuf, sizeof(iovbuf)) < 0)
+ DHD_ERROR(("%s: roam fullscan setup failed\n", __FUNCTION__));
+
+ if (dhdcdc_query_ioctl(dhd, 0, WLC_GET_BAND, \
+ (char *)&band, sizeof(band)) < 0)
+ DHD_ERROR(("%s: roam delta setting failed\n", __FUNCTION__));
+ else {
+ if ((band == WLC_BAND_AUTO) || (band == WLC_BAND_ALL))
+ {
+ /* temp set band to insert new roams values */
+ if (dhdcdc_set_ioctl(dhd, 0, WLC_SET_BAND, \
+ (char *)&band_temp_set, sizeof(band_temp_set)) < 0)
+ DHD_ERROR(("%s: local band seting failed\n", __FUNCTION__));
+ }
+ if (dhdcdc_set_ioctl(dhd, 0, WLC_SET_ROAM_DELTA, \
+ (char *)&roam_delta, sizeof(roam_delta)) < 0)
+ DHD_ERROR(("%s: roam delta setting failed\n", __FUNCTION__));
+
+ if (dhdcdc_set_ioctl(dhd, 0, WLC_SET_ROAM_TRIGGER, \
+ (char *)&roam_trigger, sizeof(roam_trigger)) < 0)
+ DHD_ERROR(("%s: roam trigger setting failed\n", __FUNCTION__));
+
+ /* Restore original band settinngs */
+ if (dhdcdc_set_ioctl(dhd, 0, WLC_SET_BAND, \
+ (char *)&band, sizeof(band)) < 0)
+ DHD_ERROR(("%s: Original band restore failed\n", __FUNCTION__));
+ }
+ }
+
+ /* Force STA UP */
+ if (dhd_radio_up)
+ dhdcdc_set_ioctl(dhd, 0, WLC_UP, (char *)&up, sizeof(up));
+
+ /* Setup event_msgs */
+ bcm_mkiovar("event_msgs", dhd->eventmask, WL_EVENTING_MASK_LEN, iovbuf, sizeof(iovbuf));
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_SCAN_CHANNEL_TIME, (char *)&scan_assoc_time,
+ sizeof(scan_assoc_time));
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_SCAN_UNASSOC_TIME, (char *)&scan_unassoc_time,
+ sizeof(scan_unassoc_time));
+
+#ifdef ARP_OFFLOAD_SUPPORT
+ /* Set and enable ARP offload feature */
+ if (dhd_arp_enable)
+ dhd_arp_offload_set(dhd, dhd_arp_mode);
+ dhd_arp_offload_enable(dhd, dhd_arp_enable);
+#endif /* ARP_OFFLOAD_SUPPORT */
+
+#ifdef PKT_FILTER_SUPPORT
+ {
+ int i;
+ /* Set up pkt filter */
+ if (dhd_pkt_filter_enable) {
+ for (i = 0; i < dhd->pktfilter_count; i++) {
+ dhd_pktfilter_offload_set(dhd, dhd->pktfilter[i]);
+ dhd_pktfilter_offload_enable(dhd, dhd->pktfilter[i],
+ dhd_pkt_filter_init, dhd_master_mode);
+ }
+ }
+ }
+#endif /* PKT_FILTER_SUPPORT */
+
+#if defined(KEEP_ALIVE)
+ {
+ /* Set Keep Alive : be sure to use FW with -keepalive */
+ int res;
+
+ if (ap_fw_loaded == FALSE) {
+ if ((res = dhd_keep_alive_onoff(dhd, 1)) < 0)
+ DHD_ERROR(("%s set keeplive failed %d\n", \
+ __FUNCTION__, res));
+ }
+ }
+#endif
+
+ dhd_os_proto_unblock(dhd);
+
+ return 0;
+}
+
+#ifdef SIMPLE_ISCAN
+
+uint iscan_thread_id;
+iscan_buf_t * iscan_chain = 0;
+
+iscan_buf_t *
+dhd_iscan_allocate_buf(dhd_pub_t *dhd, iscan_buf_t **iscanbuf)
+{
+ iscan_buf_t *iscanbuf_alloc = 0;
+ iscan_buf_t *iscanbuf_head;
+
+ dhd_iscan_lock();
+
+ iscanbuf_alloc = (iscan_buf_t*)MALLOC(dhd->osh, sizeof(iscan_buf_t));
+ if (iscanbuf_alloc == NULL)
+ goto fail;
+
+ iscanbuf_alloc->next = NULL;
+ iscanbuf_head = *iscanbuf;
+
+ DHD_ISCAN(("%s: addr of allocated node = 0x%X"
+ "addr of iscanbuf_head = 0x%X dhd = 0x%X\n",
+ __FUNCTION__, iscanbuf_alloc, iscanbuf_head, dhd));
+
+ if (iscanbuf_head == NULL) {
+ *iscanbuf = iscanbuf_alloc;
+ DHD_ISCAN(("%s: Head is allocated\n", __FUNCTION__));
+ goto fail;
+ }
+
+ while (iscanbuf_head->next)
+ iscanbuf_head = iscanbuf_head->next;
+
+ iscanbuf_head->next = iscanbuf_alloc;
+
+fail:
+ dhd_iscan_unlock();
+ return iscanbuf_alloc;
+}
+
+void
+dhd_iscan_free_buf(void *dhdp, iscan_buf_t *iscan_delete)
+{
+ iscan_buf_t *iscanbuf_free = 0;
+ iscan_buf_t *iscanbuf_prv = 0;
+ iscan_buf_t *iscanbuf_cur = iscan_chain;
+ dhd_pub_t *dhd = dhd_bus_pub(dhdp);
+
+ dhd_iscan_lock();
+ /* If iscan_delete is null then delete the entire
+ * chain or else delete specific one provided
+ */
+ if (!iscan_delete) {
+ while (iscanbuf_cur) {
+ iscanbuf_free = iscanbuf_cur;
+ iscanbuf_cur = iscanbuf_cur->next;
+ iscanbuf_free->next = 0;
+ MFREE(dhd->osh, iscanbuf_free, sizeof(iscan_buf_t));
+ }
+ iscan_chain = 0;
+ } else {
+ while (iscanbuf_cur) {
+ if (iscanbuf_cur == iscan_delete)
+ break;
+ iscanbuf_prv = iscanbuf_cur;
+ iscanbuf_cur = iscanbuf_cur->next;
+ }
+ if (iscanbuf_prv)
+ iscanbuf_prv->next = iscan_delete->next;
+
+ iscan_delete->next = 0;
+ MFREE(dhd->osh, iscan_delete, sizeof(iscan_buf_t));
+
+ if (!iscanbuf_prv)
+ iscan_chain = 0;
+ }
+ dhd_iscan_unlock();
+}
+
+iscan_buf_t *
+dhd_iscan_result_buf(void)
+{
+ return iscan_chain;
+}
+
+
+
+/*
+* print scan cache
+* print partial iscan_skip list differently
+*/
+int
+dhd_iscan_print_cache(iscan_buf_t *iscan_skip)
+{
+ int i = 0, l = 0;
+ iscan_buf_t *iscan_cur;
+ wl_iscan_results_t *list;
+ wl_scan_results_t *results;
+ wl_bss_info_t UNALIGNED *bi;
+
+ dhd_iscan_lock();
+
+ iscan_cur = dhd_iscan_result_buf();
+
+ while (iscan_cur) {
+ list = (wl_iscan_results_t *)iscan_cur->iscan_buf;
+ if (!list)
+ break;
+
+ results = (wl_scan_results_t *)&list->results;
+ if (!results)
+ break;
+
+ if (results->version != WL_BSS_INFO_VERSION) {
+ DHD_ISCAN(("%s: results->version %d != WL_BSS_INFO_VERSION\n",
+ __FUNCTION__, results->version));
+ goto done;
+ }
+
+ bi = results->bss_info;
+ for (i = 0; i < results->count; i++) {
+ if (!bi)
+ break;
+
+ DHD_ISCAN(("%s[%2.2d:%2.2d] %X:%X:%X:%X:%X:%X\n",
+ iscan_cur != iscan_skip?"BSS":"bss", l, i,
+ bi->BSSID.octet[0], bi->BSSID.octet[1], bi->BSSID.octet[2],
+ bi->BSSID.octet[3], bi->BSSID.octet[4], bi->BSSID.octet[5]));
+
+ bi = (wl_bss_info_t *)((uintptr)bi + dtoh32(bi->length));
+ }
+ iscan_cur = iscan_cur->next;
+ l++;
+ }
+
+done:
+ dhd_iscan_unlock();
+ return 0;
+}
+
+/*
+* delete disappeared AP from specific scan cache but skip partial list in iscan_skip
+*/
+int
+dhd_iscan_delete_bss(void *dhdp, void *addr, iscan_buf_t *iscan_skip)
+{
+ int i = 0, j = 0, l = 0;
+ iscan_buf_t *iscan_cur;
+ wl_iscan_results_t *list;
+ wl_scan_results_t *results;
+ wl_bss_info_t UNALIGNED *bi, *bi_new, *bi_next;
+
+ uchar *s_addr = addr;
+
+ dhd_iscan_lock();
+ DHD_ISCAN(("%s: BSS to remove %X:%X:%X:%X:%X:%X\n",
+ __FUNCTION__, s_addr[0], s_addr[1], s_addr[2],
+ s_addr[3], s_addr[4], s_addr[5]));
+
+ iscan_cur = dhd_iscan_result_buf();
+
+ while (iscan_cur) {
+ if (iscan_cur != iscan_skip) {
+ list = (wl_iscan_results_t *)iscan_cur->iscan_buf;
+ if (!list)
+ break;
+
+ results = (wl_scan_results_t *)&list->results;
+ if (!results)
+ break;
+
+ if (results->version != WL_BSS_INFO_VERSION) {
+ DHD_ERROR(("%s: results->version %d != WL_BSS_INFO_VERSION\n",
+ __FUNCTION__, results->version));
+ goto done;
+ }
+
+ bi = results->bss_info;
+ for (i = 0; i < results->count; i++) {
+ if (!bi)
+ break;
+
+ if (!memcmp(bi->BSSID.octet, addr, ETHER_ADDR_LEN)) {
+ DHD_ISCAN(("%s: Del BSS[%2.2d:%2.2d] %X:%X:%X:%X:%X:%X\n",
+ __FUNCTION__, l, i, bi->BSSID.octet[0],
+ bi->BSSID.octet[1], bi->BSSID.octet[2],
+ bi->BSSID.octet[3], bi->BSSID.octet[4],
+ bi->BSSID.octet[5]));
+
+ bi_new = bi;
+ bi = (wl_bss_info_t *)((uintptr)bi + dtoh32(bi->length));
+/*
+ if(bi && bi_new) {
+ bcopy(bi, bi_new, results->buflen -
+ dtoh32(bi_new->length));
+ results->buflen -= dtoh32(bi_new->length);
+ }
+*/
+ results->buflen -= dtoh32(bi_new->length);
+ results->count--;
+
+ for (j = i; j < results->count; j++) {
+ if (bi && bi_new) {
+ DHD_ISCAN(("%s: Moved up BSS[%2.2d:%2.2d]"
+ "%X:%X:%X:%X:%X:%X\n",
+ __FUNCTION__, l, j, bi->BSSID.octet[0],
+ bi->BSSID.octet[1], bi->BSSID.octet[2],
+ bi->BSSID.octet[3], bi->BSSID.octet[4],
+ bi->BSSID.octet[5]));
+
+ bi_next = (wl_bss_info_t *)((uintptr)bi +
+ dtoh32(bi->length));
+ bcopy(bi, bi_new, dtoh32(bi->length));
+ bi_new = (wl_bss_info_t *)((uintptr)bi_new +
+ dtoh32(bi_new->length));
+ bi = bi_next;
+ }
+ }
+
+ if (results->count == 0) {
+ /* Prune now empty partial scan list */
+ dhd_iscan_free_buf(dhdp, iscan_cur);
+ goto done;
+ }
+ break;
+ }
+ bi = (wl_bss_info_t *)((uintptr)bi + dtoh32(bi->length));
+ }
+ }
+ iscan_cur = iscan_cur->next;
+ l++;
+ }
+
+done:
+ dhd_iscan_unlock();
+ return 0;
+}
+
+int
+dhd_iscan_remove_duplicates(void * dhdp, iscan_buf_t *iscan_cur)
+{
+ int i = 0;
+ wl_iscan_results_t *list;
+ wl_scan_results_t *results;
+ wl_bss_info_t UNALIGNED *bi, *bi_new, *bi_next;
+
+ dhd_iscan_lock();
+
+ DHD_ISCAN(("%s: Scan cache before delete\n",
+ __FUNCTION__));
+ dhd_iscan_print_cache(iscan_cur);
+
+ if (!iscan_cur)
+ goto done;
+
+ list = (wl_iscan_results_t *)iscan_cur->iscan_buf;
+ if (!list)
+ goto done;
+
+ results = (wl_scan_results_t *)&list->results;
+ if (!results)
+ goto done;
+
+ if (results->version != WL_BSS_INFO_VERSION) {
+ DHD_ERROR(("%s: results->version %d != WL_BSS_INFO_VERSION\n",
+ __FUNCTION__, results->version));
+ goto done;
+ }
+
+ bi = results->bss_info;
+ for (i = 0; i < results->count; i++) {
+ if (!bi)
+ break;
+
+ DHD_ISCAN(("%s: Find dups for BSS[%2.2d] %X:%X:%X:%X:%X:%X\n",
+ __FUNCTION__, i, bi->BSSID.octet[0], bi->BSSID.octet[1], bi->BSSID.octet[2],
+ bi->BSSID.octet[3], bi->BSSID.octet[4], bi->BSSID.octet[5]));
+
+ dhd_iscan_delete_bss(dhdp, bi->BSSID.octet, iscan_cur);
+
+ bi = (wl_bss_info_t *)((uintptr)bi + dtoh32(bi->length));
+ }
+
+done:
+ DHD_ISCAN(("%s: Scan cache after delete\n", __FUNCTION__));
+ dhd_iscan_print_cache(iscan_cur);
+ dhd_iscan_unlock();
+ return 0;
+}
+
+void
+dhd_iscan_ind_scan_confirm(void *dhdp, bool status)
+{
+
+ dhd_ind_scan_confirm(dhdp, status);
+}
+
+int
+dhd_iscan_request(void * dhdp, uint16 action)
+{
+ int rc;
+ wl_iscan_params_t params;
+ dhd_pub_t *dhd = dhd_bus_pub(dhdp);
+ char buf[WLC_IOCTL_SMLEN];
+
+
+ memset(¶ms, 0, sizeof(wl_iscan_params_t));
+ memcpy(¶ms.params.bssid, ðer_bcast, ETHER_ADDR_LEN);
+
+ params.params.bss_type = DOT11_BSSTYPE_ANY;
+ params.params.scan_type = DOT11_SCANTYPE_ACTIVE;
+
+ params.params.nprobes = htod32(-1);
+ params.params.active_time = htod32(-1);
+ params.params.passive_time = htod32(-1);
+ params.params.home_time = htod32(-1);
+ params.params.channel_num = htod32(0);
+
+ params.version = htod32(ISCAN_REQ_VERSION);
+ params.action = htod16(action);
+ params.scan_duration = htod16(0);
+
+ bcm_mkiovar("iscan", (char *)¶ms, sizeof(wl_iscan_params_t), buf, WLC_IOCTL_SMLEN);
+ rc = dhd_wl_ioctl(dhdp, WLC_SET_VAR, buf, WLC_IOCTL_SMLEN);
+
+ return rc;
+}
+
+static int
+dhd_iscan_get_partial_result(void *dhdp, uint *scan_count)
+{
+ wl_iscan_results_t *list_buf;
+ wl_iscan_results_t list;
+ wl_scan_results_t *results;
+ iscan_buf_t *iscan_cur;
+ int status = -1;
+ dhd_pub_t *dhd = dhd_bus_pub(dhdp);
+ int rc;
+
+
+ iscan_cur = dhd_iscan_allocate_buf(dhd, &iscan_chain);
+ if (!iscan_cur) {
+ DHD_ERROR(("%s: Failed to allocate node\n", __FUNCTION__));
+ dhd_iscan_free_buf(dhdp, 0);
+ dhd_iscan_request(dhdp, WL_SCAN_ACTION_ABORT);
+ goto fail;
+ }
+
+ dhd_iscan_lock();
+
+ memset(iscan_cur->iscan_buf, 0, WLC_IW_ISCAN_MAXLEN);
+ list_buf = (wl_iscan_results_t*)iscan_cur->iscan_buf;
+ results = &list_buf->results;
+ results->buflen = WL_ISCAN_RESULTS_FIXED_SIZE;
+ results->version = 0;
+ results->count = 0;
+
+ memset(&list, 0, sizeof(list));
+ list.results.buflen = htod32(WLC_IW_ISCAN_MAXLEN);
+ bcm_mkiovar("iscanresults", (char *)&list, WL_ISCAN_RESULTS_FIXED_SIZE,
+ iscan_cur->iscan_buf, WLC_IW_ISCAN_MAXLEN);
+ rc = dhd_wl_ioctl(dhdp, WLC_GET_VAR, iscan_cur->iscan_buf, WLC_IW_ISCAN_MAXLEN);
+
+ results->buflen = dtoh32(results->buflen);
+ results->version = dtoh32(results->version);
+ *scan_count = results->count = dtoh32(results->count);
+ status = dtoh32(list_buf->status);
+
+ dhd_iscan_unlock();
+
+ if (!(*scan_count))
+ dhd_iscan_free_buf(dhdp, iscan_cur);
+ else
+ dhd_iscan_remove_duplicates(dhdp, iscan_cur);
+
+
+fail:
+ return status;
+}
+
+#endif
+
+/* Function to estimate possible DTIM_SKIP value */
+int dhd_get_dtim_skip(dhd_pub_t *dhd)
+{
+ int bcn_li_dtim;
+ char buf[128];
+ int ret;
+ int dtim_assoc = 0;
+
+ if ((dhd->dtim_skip == 0) || (dhd->dtim_skip == 1))
+ bcn_li_dtim = 3;
+ else
+ bcn_li_dtim = dhd->dtim_skip;
+
+ /* Read DTIM value if associated */
+ memset(buf, 0, sizeof(buf));
+ bcm_mkiovar("dtim_assoc", 0, 0, buf, sizeof(buf));
+ if ((ret = dhdcdc_query_ioctl(dhd, 0, WLC_GET_VAR, buf, sizeof(buf))) < 0) {
+ DHD_ERROR(("%s failed code %d\n", __FUNCTION__, ret));
+ bcn_li_dtim = 1;
+ goto exit;
+ }
+ else
+ dtim_assoc = dtoh32(*(int *)buf);
+
+ DHD_ERROR(("%s bcn_li_dtim=%d DTIM=%d Listen=%d\n", \
+ __FUNCTION__, bcn_li_dtim, dtim_assoc, LISTEN_INTERVAL));
+
+ /* if not assocated just eixt */
+ if (dtim_assoc == 0) {
+ goto exit;
+ }
+
+ /* check if sta listen interval fits into AP dtim */
+ if (dtim_assoc > LISTEN_INTERVAL) {
+ /* AP DTIM to big for our Listen Interval : no dtim skiping */
+ bcn_li_dtim = 1;
+ DHD_ERROR(("%s DTIM=%d > Listen=%d : too big ...\n", \
+ __FUNCTION__, dtim_assoc, LISTEN_INTERVAL));
+ goto exit;
+ }
+
+ if ((bcn_li_dtim * dtim_assoc) > LISTEN_INTERVAL) {
+ /* Round up dtim_skip to fit into STAs Listen Interval */
+ bcn_li_dtim = (int)(LISTEN_INTERVAL / dtim_assoc);
+ DHD_TRACE(("%s agjust dtim_skip as %d\n", __FUNCTION__, bcn_li_dtim));
+ }
+
+exit:
+ return bcn_li_dtim;
+}
+
+#ifdef PNO_SUPPORT
+int dhd_pno_clean(dhd_pub_t *dhd)
+{
+ char iovbuf[128];
+ int pfn_enabled = 0;
+ int iov_len = 0;
+ int ret;
+
+ /* Disable pfn */
+ iov_len = bcm_mkiovar("pfn", (char *)&pfn_enabled, 4, iovbuf, sizeof(iovbuf));
+ if ((ret = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf))) >= 0) {
+ /* clear pfn */
+ iov_len = bcm_mkiovar("pfnclear", 0, 0, iovbuf, sizeof(iovbuf));
+ if (iov_len) {
+ if ((ret = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, iov_len)) < 0) {
+ DHD_ERROR(("%s failed code %d\n", __FUNCTION__, ret));
+ }
+ }
+ else {
+ ret = -1;
+ DHD_ERROR(("%s failed code %d\n", __FUNCTION__, iov_len));
+ }
+ }
+ else
+ DHD_ERROR(("%s failed code %d\n", __FUNCTION__, ret));
+
+ return ret;
+}
+
+int dhd_pno_enable(dhd_pub_t *dhd, int pfn_enabled)
+{
+ char iovbuf[128];
+ int ret = -1;
+
+ if ((!dhd) && ((pfn_enabled != 0) || (pfn_enabled != 1))) {
+ DHD_ERROR(("%s error exit\n", __FUNCTION__));
+ return ret;
+ }
+
+ /* Enable/disable PNO */
+ if ((ret = bcm_mkiovar("pfn", (char *)&pfn_enabled, 4, iovbuf, sizeof(iovbuf))) > 0) {
+ if ((ret = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf))) < 0) {
+ DHD_ERROR(("%s failed for error=%d\n", __FUNCTION__, ret));
+ return ret;
+ }
+ else {
+ dhd->pno_enable = pfn_enabled;
+ DHD_TRACE(("%s set pno as %d\n", __FUNCTION__, dhd->pno_enable));
+ }
+ }
+ else DHD_ERROR(("%s failed err=%d\n", __FUNCTION__, ret));
+
+ return ret;
+}
+
+/* Function to execute combined scan */
+int
+dhd_pno_set(dhd_pub_t *dhd, wlc_ssid_t* ssids_local, int nssid, ushort scan_fr)
+{
+ int err = -1;
+ char iovbuf[128];
+ int k, i;
+ wl_pfn_param_t pfn_param;
+ wl_pfn_t pfn_element;
+
+ DHD_TRACE(("%s nssid=%d nchan=%d\n", __FUNCTION__, nssid, scan_fr));
+
+ if ((!dhd) && (!ssids_local)) {
+ DHD_ERROR(("%s error exit\n", __FUNCTION__));
+ err = -1;
+ }
+
+ /* Check for broadcast ssid */
+ for (k = 0; k < nssid; k++) {
+ if (!ssids_local[k].SSID_len) {
+ DHD_ERROR(("%d: Broadcast SSID is ilegal for PNO setting\n", k));
+ return err;
+ }
+ }
+/* #define PNO_DUMP 1 */
+#ifdef PNO_DUMP
+ {
+ int j;
+ for (j = 0; j < nssid; j++) {
+ DHD_ERROR(("%d: scan for %s size =%d\n", j,
+ ssids_local[j].SSID, ssids_local[j].SSID_len));
+ }
+ }
+#endif /* PNO_DUMP */
+
+ /* clean up everything */
+ if ((err = dhd_pno_clean(dhd)) < 0) {
+ DHD_ERROR(("%s failed error=%d\n", __FUNCTION__, err));
+ return err;
+ }
+ memset(&pfn_param, 0, sizeof(pfn_param));
+ memset(&pfn_element, 0, sizeof(pfn_element));
+
+ /* set pfn parameters */
+ pfn_param.version = htod32(PFN_VERSION);
+ pfn_param.flags = htod16((PFN_LIST_ORDER << SORT_CRITERIA_BIT));
+
+ /* set up pno scan fr */
+ if (scan_fr != 0)
+ pfn_param.scan_freq = htod32(scan_fr);
+
+ if (pfn_param.scan_freq > PNO_SCAN_MAX_FW) {
+ DHD_ERROR(("%s pno freq above %d sec\n", __FUNCTION__, PNO_SCAN_MAX_FW));
+ return err;
+ }
+
+ bcm_mkiovar("pfn_set", (char *)&pfn_param, sizeof(pfn_param), iovbuf, sizeof(iovbuf));
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+
+ /* set all pfn ssid */
+ for (i = 0; i < nssid; i++) {
+
+ pfn_element.bss_type = htod32(DOT11_BSSTYPE_INFRASTRUCTURE);
+ pfn_element.auth = (DOT11_OPEN_SYSTEM);
+ pfn_element.wpa_auth = htod32(WPA_AUTH_PFN_ANY);
+ pfn_element.wsec = htod32(0);
+ pfn_element.infra = htod32(1);
+
+ memcpy((char *)pfn_element.ssid.SSID, ssids_local[i].SSID, ssids_local[i].SSID_len);
+ pfn_element.ssid.SSID_len = ssids_local[i].SSID_len;
+
+ if ((err =
+ bcm_mkiovar("pfn_add", (char *)&pfn_element,
+ sizeof(pfn_element), iovbuf, sizeof(iovbuf))) > 0) {
+ if ((err =
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf))) < 0) {
+ DHD_ERROR(("%s failed for i=%d error=%d\n",
+ __FUNCTION__, i, err));
+ return err;
+ }
+ else
+ DHD_ERROR(("%s set OK with PNO time=%d\n", __FUNCTION__, \
+ pfn_param.scan_freq));
+ }
+ else DHD_ERROR(("%s failed err=%d\n", __FUNCTION__, err));
+ }
+
+ /* Enable PNO */
+ /* dhd_pno_enable(dhd, 1); */
+ return err;
+}
+
+int dhd_pno_get_status(dhd_pub_t *dhd)
+{
+ int ret = -1;
+
+ if (!dhd)
+ return ret;
+ else
+ return (dhd->pno_enable);
+}
+
+#endif /* PNO_SUPPORT */
+
+#if defined(KEEP_ALIVE)
+int dhd_keep_alive_onoff(dhd_pub_t *dhd, int ka_on)
+{
+ char buf[256];
+ char *buf_ptr = buf;
+ wl_keep_alive_pkt_t keep_alive_pkt;
+ char * str;
+ int str_len, buf_len;
+ int res = 0;
+ int keep_alive_period = KEEP_ALIVE_PERIOD; /* in ms */
+
+ DHD_TRACE(("%s: ka:%d\n", __FUNCTION__, ka_on));
+
+ if (ka_on) { /* on suspend */
+ keep_alive_pkt.period_msec = keep_alive_period;
+
+ } else {
+ /* on resume, turn off keep_alive packets */
+ keep_alive_pkt.period_msec = 0;
+ }
+
+ /* IOC var name */
+ str = "keep_alive";
+ str_len = strlen(str);
+ strncpy(buf, str, str_len);
+ buf[str_len] = '\0';
+ buf_len = str_len + 1;
+
+ /* set ptr to IOCTL payload after the var name */
+ buf_ptr += buf_len; /* include term Z */
+
+ /* copy Keep-alive attributes from local var keep_alive_pkt */
+ str = NULL_PKT_STR;
+ keep_alive_pkt.len_bytes = strlen(str);
+
+ memcpy(buf_ptr, &keep_alive_pkt, WL_KEEP_ALIVE_FIXED_LEN);
+ buf_ptr += WL_KEEP_ALIVE_FIXED_LEN;
+
+ /* copy packet data */
+ memcpy(buf_ptr, str, keep_alive_pkt.len_bytes);
+ buf_len += (WL_KEEP_ALIVE_FIXED_LEN + keep_alive_pkt.len_bytes);
+
+ res = dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, buf, buf_len);
+ return res;
+}
+#endif /* defined(KEEP_ALIVE) */
+
+#if defined(CSCAN)
+
+/* Androd ComboSCAN support */
+/*
+ * data parsing from ComboScan tlv list
+*/
+int
+wl_iw_parse_data_tlv(char** list_str, void *dst, int dst_size, const char token,
+ int input_size, int *bytes_left)
+{
+ char* str = *list_str;
+ uint16 short_temp;
+ uint32 int_temp;
+
+ if ((list_str == NULL) || (*list_str == NULL) ||(bytes_left == NULL) || (*bytes_left < 0)) {
+ DHD_ERROR(("%s error paramters\n", __FUNCTION__));
+ return -1;
+ }
+
+ /* Clean all dest bytes */
+ memset(dst, 0, dst_size);
+ while (*bytes_left > 0) {
+
+ if (str[0] != token) {
+ DHD_TRACE(("%s NOT Type=%d get=%d left_parse=%d \n",
+ __FUNCTION__, token, str[0], *bytes_left));
+ return -1;
+ }
+
+ *bytes_left -= 1;
+ str += 1;
+
+ if (input_size == 1) {
+ memcpy(dst, str, input_size);
+ }
+ else if (input_size == 2) {
+ memcpy(dst, (char *)htod16(memcpy(&short_temp, str, input_size)),
+ input_size);
+ }
+ else if (input_size == 4) {
+ memcpy(dst, (char *)htod32(memcpy(&int_temp, str, input_size)),
+ input_size);
+ }
+
+ *bytes_left -= input_size;
+ str += input_size;
+ *list_str = str;
+ return 1;
+ }
+ return 1;
+}
+
+/*
+ * channel list parsing from cscan tlv list
+*/
+int
+wl_iw_parse_channel_list_tlv(char** list_str, uint16* channel_list,
+ int channel_num, int *bytes_left)
+{
+ char* str = *list_str;
+ int idx = 0;
+
+ if ((list_str == NULL) || (*list_str == NULL) ||(bytes_left == NULL) || (*bytes_left < 0)) {
+ DHD_ERROR(("%s error paramters\n", __FUNCTION__));
+ return -1;
+ }
+
+ while (*bytes_left > 0) {
+
+ if (str[0] != CSCAN_TLV_TYPE_CHANNEL_IE) {
+ *list_str = str;
+ DHD_TRACE(("End channel=%d left_parse=%d %d\n", idx, *bytes_left, str[0]));
+ return idx;
+ }
+ /* Get proper CSCAN_TLV_TYPE_CHANNEL_IE */
+ *bytes_left -= 1;
+ str += 1;
+
+ if (str[0] == 0) {
+ /* All channels */
+ channel_list[idx] = 0x0;
+ }
+ else {
+ channel_list[idx] = (uint16)str[0];
+ DHD_TRACE(("%s channel=%d \n", __FUNCTION__, channel_list[idx]));
+ }
+ *bytes_left -= 1;
+ str += 1;
+
+ if (idx++ > 255) {
+ DHD_ERROR(("%s Too many channels \n", __FUNCTION__));
+ return -1;
+ }
+ }
+
+ *list_str = str;
+ return idx;
+}
+
+/*
+ * SSIDs list parsing from cscan tlv list
+ */
+int
+wl_iw_parse_ssid_list_tlv(char** list_str, wlc_ssid_t* ssid, int max, int *bytes_left)
+{
+ char* str = *list_str;
+ int idx = 0;
+
+ if ((list_str == NULL) || (*list_str == NULL) || (*bytes_left < 0)) {
+ DHD_ERROR(("%s error paramters\n", __FUNCTION__));
+ return -1;
+ }
+
+ while (*bytes_left > 0) {
+
+ if (str[0] != CSCAN_TLV_TYPE_SSID_IE) {
+ *list_str = str;
+ DHD_TRACE(("nssid=%d left_parse=%d %d\n", idx, *bytes_left, str[0]));
+ return idx;
+ }
+
+ /* Get proper CSCAN_TLV_TYPE_SSID_IE */
+ *bytes_left -= 1;
+ str += 1;
+
+ if (str[0] == 0) {
+ /* Broadcast SSID */
+ ssid[idx].SSID_len = 0;
+ memset((char*)ssid[idx].SSID, 0x0, DOT11_MAX_SSID_LEN);
+ *bytes_left -= 1;
+ str += 1;
+
+ DHD_TRACE(("BROADCAST SCAN left=%d\n", *bytes_left));
+ }
+ else if (str[0] <= DOT11_MAX_SSID_LEN) {
+ /* Get proper SSID size */
+ ssid[idx].SSID_len = str[0];
+ *bytes_left -= 1;
+ str += 1;
+
+ /* Get SSID */
+ if (ssid[idx].SSID_len > *bytes_left) {
+ DHD_ERROR(("%s out of memory range len=%d but left=%d\n",
+ __FUNCTION__, ssid[idx].SSID_len, *bytes_left));
+ return -1;
+ }
+
+ memcpy((char*)ssid[idx].SSID, str, ssid[idx].SSID_len);
+
+ *bytes_left -= ssid[idx].SSID_len;
+ str += ssid[idx].SSID_len;
+
+ DHD_TRACE(("%s :size=%d left=%d\n",
+ (char*)ssid[idx].SSID, ssid[idx].SSID_len, *bytes_left));
+ }
+ else {
+ DHD_ERROR(("### SSID size more that %d\n", str[0]));
+ return -1;
+ }
+
+ if (idx++ > max) {
+ DHD_ERROR(("%s number of SSIDs more that %d\n", __FUNCTION__, idx));
+ return -1;
+ }
+ }
+
+ *list_str = str;
+ return idx;
+}
+
+/* Parse a comma-separated list from list_str into ssid array, starting
+ * at index idx. Max specifies size of the ssid array. Parses ssids
+ * and returns updated idx; if idx >= max not all fit, the excess have
+ * not been copied. Returns -1 on empty string, or on ssid too long.
+ */
+int
+wl_iw_parse_ssid_list(char** list_str, wlc_ssid_t* ssid, int idx, int max)
+{
+ char* str, *ptr;
+
+ if ((list_str == NULL) || (*list_str == NULL))
+ return -1;
+
+ for (str = *list_str; str != NULL; str = ptr) {
+
+ /* check for next TAG */
+ if (!strncmp(str, GET_CHANNEL, strlen(GET_CHANNEL))) {
+ *list_str = str + strlen(GET_CHANNEL);
+ return idx;
+ }
+
+ if ((ptr = strchr(str, ',')) != NULL) {
+ *ptr++ = '\0';
+ }
+
+ if (strlen(str) > DOT11_MAX_SSID_LEN) {
+ DHD_ERROR(("ssid <%s> exceeds %d\n", str, DOT11_MAX_SSID_LEN));
+ return -1;
+ }
+
+ if (strlen(str) == 0)
+ ssid[idx].SSID_len = 0;
+
+ if (idx < max) {
+ strcpy((char*)ssid[idx].SSID, str);
+ ssid[idx].SSID_len = strlen(str);
+ }
+ idx++;
+ }
+ return idx;
+}
+
+/*
+ * Parse channel list from iwpriv CSCAN
+ */
+int
+wl_iw_parse_channel_list(char** list_str, uint16* channel_list, int channel_num)
+{
+ int num;
+ int val;
+ char* str;
+ char* endptr = NULL;
+
+ if ((list_str == NULL)||(*list_str == NULL))
+ return -1;
+
+ str = *list_str;
+ num = 0;
+ while (strncmp(str, GET_NPROBE, strlen(GET_NPROBE))) {
+ val = (int)strtoul(str, &endptr, 0);
+ if (endptr == str) {
+ printf("could not parse channel number starting at"
+ " substring \"%s\" in list:\n%s\n",
+ str, *list_str);
+ return -1;
+ }
+ str = endptr + strspn(endptr, " ,");
+
+ if (num == channel_num) {
+ DHD_ERROR(("too many channels (more than %d) in channel list:\n%s\n",
+ channel_num, *list_str));
+ return -1;
+ }
+
+ channel_list[num++] = (uint16)val;
+ }
+ *list_str = str;
+ return num;
+}
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/dhd_custom_gpio.c b/drivers/net/wireless/bcm4329/dhd_custom_gpio.c
new file mode 100644
index 0000000..8c6ec47
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dhd_custom_gpio.c
@@ -0,0 +1,179 @@
+/*
+* Customer code to add GPIO control during WLAN start/stop
+* Copyright (C) 1999-2010, Broadcom Corporation
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2 (the "GPL"),
+* available at http://www.broadcom.com/licenses/GPLv2.php, with the
+* following added to such license:
+*
+* As a special exception, the copyright holders of this software give you
+* permission to link this software with independent modules, and to copy and
+* distribute the resulting executable under terms of your choice, provided that
+* you also meet, for each linked independent module, the terms and conditions of
+* the license of that module. An independent module is a module which is not
+* derived from this software. The special exception does not apply to any
+* modifications of the software.
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a license
+* other than the GPL, without Broadcom's express prior written consent.
+*
+* $Id: dhd_custom_gpio.c,v 1.1.4.8.4.1 2010/09/02 23:13:16 Exp $
+*/
+
+
+#include <typedefs.h>
+#include <linuxver.h>
+#include <osl.h>
+#include <bcmutils.h>
+
+#include <dngl_stats.h>
+#include <dhd.h>
+
+#include <wlioctl.h>
+#include <wl_iw.h>
+
+#define WL_ERROR(x) printf x
+#define WL_TRACE(x)
+
+#ifdef CUSTOMER_HW
+extern void bcm_wlan_power_off(int);
+extern void bcm_wlan_power_on(int);
+#endif /* CUSTOMER_HW */
+#ifdef CUSTOMER_HW2
+int wifi_set_carddetect(int on);
+int wifi_set_power(int on, unsigned long msec);
+int wifi_get_irq_number(unsigned long *irq_flags_ptr);
+int wifi_get_mac_addr(unsigned char *buf);
+#endif
+
+#if defined(OOB_INTR_ONLY)
+
+#if defined(BCMLXSDMMC)
+extern int sdioh_mmc_irq(int irq);
+#endif /* (BCMLXSDMMC) */
+
+#ifdef CUSTOMER_HW3
+#include <mach/gpio.h>
+#endif
+
+/* Customer specific Host GPIO defintion */
+static int dhd_oob_gpio_num = -1; /* GG 19 */
+
+module_param(dhd_oob_gpio_num, int, 0644);
+MODULE_PARM_DESC(dhd_oob_gpio_num, "DHD oob gpio number");
+
+int dhd_customer_oob_irq_map(unsigned long *irq_flags_ptr)
+{
+ int host_oob_irq = 0;
+
+#ifdef CUSTOMER_HW2
+ host_oob_irq = wifi_get_irq_number(irq_flags_ptr);
+
+#else /* for NOT CUSTOMER_HW2 */
+#if defined(CUSTOM_OOB_GPIO_NUM)
+ if (dhd_oob_gpio_num < 0) {
+ dhd_oob_gpio_num = CUSTOM_OOB_GPIO_NUM;
+ }
+#endif
+
+ if (dhd_oob_gpio_num < 0) {
+ WL_ERROR(("%s: ERROR customer specific Host GPIO is NOT defined \n",
+ __FUNCTION__));
+ return (dhd_oob_gpio_num);
+ }
+
+ WL_ERROR(("%s: customer specific Host GPIO number is (%d)\n",
+ __FUNCTION__, dhd_oob_gpio_num));
+
+#if defined CUSTOMER_HW
+ host_oob_irq = MSM_GPIO_TO_INT(dhd_oob_gpio_num);
+#elif defined CUSTOMER_HW3
+ gpio_request(dhd_oob_gpio_num, "oob irq");
+ host_oob_irq = gpio_to_irq(dhd_oob_gpio_num);
+ gpio_direction_input(dhd_oob_gpio_num);
+#endif /* CUSTOMER_HW */
+#endif /* CUSTOMER_HW2 */
+
+ return (host_oob_irq);
+}
+#endif /* defined(OOB_INTR_ONLY) */
+
+/* Customer function to control hw specific wlan gpios */
+void
+dhd_customer_gpio_wlan_ctrl(int onoff)
+{
+ switch (onoff) {
+ case WLAN_RESET_OFF:
+ WL_TRACE(("%s: call customer specific GPIO to insert WLAN RESET\n",
+ __FUNCTION__));
+#ifdef CUSTOMER_HW
+ bcm_wlan_power_off(2);
+#endif /* CUSTOMER_HW */
+#ifdef CUSTOMER_HW2
+ wifi_set_power(0, 0);
+#endif
+ WL_ERROR(("=========== WLAN placed in RESET ========\n"));
+ break;
+
+ case WLAN_RESET_ON:
+ WL_TRACE(("%s: callc customer specific GPIO to remove WLAN RESET\n",
+ __FUNCTION__));
+#ifdef CUSTOMER_HW
+ bcm_wlan_power_on(2);
+#endif /* CUSTOMER_HW */
+#ifdef CUSTOMER_HW2
+ wifi_set_power(1, 0);
+#endif
+ WL_ERROR(("=========== WLAN going back to live ========\n"));
+ break;
+
+ case WLAN_POWER_OFF:
+ WL_TRACE(("%s: call customer specific GPIO to turn off WL_REG_ON\n",
+ __FUNCTION__));
+#ifdef CUSTOMER_HW
+ bcm_wlan_power_off(1);
+#endif /* CUSTOMER_HW */
+ break;
+
+ case WLAN_POWER_ON:
+ WL_TRACE(("%s: call customer specific GPIO to turn on WL_REG_ON\n",
+ __FUNCTION__));
+#ifdef CUSTOMER_HW
+ bcm_wlan_power_on(1);
+ /* Lets customer power to get stable */
+ OSL_DELAY(50);
+#endif /* CUSTOMER_HW */
+ break;
+ }
+}
+
+#ifdef GET_CUSTOM_MAC_ENABLE
+/* Function to get custom MAC address */
+int
+dhd_custom_get_mac_address(unsigned char *buf)
+{
+ int ret = 0;
+
+ WL_TRACE(("%s Enter\n", __FUNCTION__));
+ if (!buf)
+ return -EINVAL;
+
+ /* Customer access to MAC address stored outside of DHD driver */
+#ifdef CUSTOMER_HW2
+ ret = wifi_get_mac_addr(buf);
+#endif
+
+#ifdef EXAMPLE_GET_MAC
+ /* EXAMPLE code */
+ {
+ struct ether_addr ea_example = {{0x00, 0x11, 0x22, 0x33, 0x44, 0xFF}};
+ bcopy((char *)&ea_example, buf, sizeof(struct ether_addr));
+ }
+#endif /* EXAMPLE_GET_MAC */
+
+ return ret;
+}
+#endif /* GET_CUSTOM_MAC_ENABLE */
diff --git a/drivers/net/wireless/bcm4329/dhd_dbg.h b/drivers/net/wireless/bcm4329/dhd_dbg.h
new file mode 100644
index 0000000..b48c1d7
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dhd_dbg.h
@@ -0,0 +1,100 @@
+/*
+ * Debug/trace/assert driver definitions for Dongle Host Driver.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhd_dbg.h,v 1.5.6.2.4.2.14.10 2010/05/21 21:49:38 Exp $
+ */
+
+#ifndef _dhd_dbg_
+#define _dhd_dbg_
+
+#ifdef DHD_DEBUG
+
+#define DHD_ERROR(args) do {if ((dhd_msg_level & DHD_ERROR_VAL) && (net_ratelimit())) \
+ printf args;} while (0)
+#define DHD_TRACE(args) do {if (dhd_msg_level & DHD_TRACE_VAL) printf args;} while (0)
+#define DHD_INFO(args) do {if (dhd_msg_level & DHD_INFO_VAL) printf args;} while (0)
+#define DHD_DATA(args) do {if (dhd_msg_level & DHD_DATA_VAL) printf args;} while (0)
+#define DHD_CTL(args) do {if (dhd_msg_level & DHD_CTL_VAL) printf args;} while (0)
+#define DHD_TIMER(args) do {if (dhd_msg_level & DHD_TIMER_VAL) printf args;} while (0)
+#define DHD_HDRS(args) do {if (dhd_msg_level & DHD_HDRS_VAL) printf args;} while (0)
+#define DHD_BYTES(args) do {if (dhd_msg_level & DHD_BYTES_VAL) printf args;} while (0)
+#define DHD_INTR(args) do {if (dhd_msg_level & DHD_INTR_VAL) printf args;} while (0)
+#define DHD_GLOM(args) do {if (dhd_msg_level & DHD_GLOM_VAL) printf args;} while (0)
+#define DHD_EVENT(args) do {if (dhd_msg_level & DHD_EVENT_VAL) printf args;} while (0)
+#define DHD_BTA(args) do {if (dhd_msg_level & DHD_BTA_VAL) printf args;} while (0)
+#define DHD_ISCAN(args) do {if (dhd_msg_level & DHD_ISCAN_VAL) printf args;} while (0)
+
+#define DHD_ERROR_ON() (dhd_msg_level & DHD_ERROR_VAL)
+#define DHD_TRACE_ON() (dhd_msg_level & DHD_TRACE_VAL)
+#define DHD_INFO_ON() (dhd_msg_level & DHD_INFO_VAL)
+#define DHD_DATA_ON() (dhd_msg_level & DHD_DATA_VAL)
+#define DHD_CTL_ON() (dhd_msg_level & DHD_CTL_VAL)
+#define DHD_TIMER_ON() (dhd_msg_level & DHD_TIMER_VAL)
+#define DHD_HDRS_ON() (dhd_msg_level & DHD_HDRS_VAL)
+#define DHD_BYTES_ON() (dhd_msg_level & DHD_BYTES_VAL)
+#define DHD_INTR_ON() (dhd_msg_level & DHD_INTR_VAL)
+#define DHD_GLOM_ON() (dhd_msg_level & DHD_GLOM_VAL)
+#define DHD_EVENT_ON() (dhd_msg_level & DHD_EVENT_VAL)
+#define DHD_BTA_ON() (dhd_msg_level & DHD_BTA_VAL)
+#define DHD_ISCAN_ON() (dhd_msg_level & DHD_ISCAN_VAL)
+
+#else /* DHD_DEBUG */
+
+#define DHD_ERROR(args) do {if (net_ratelimit()) printf args;} while (0)
+#define DHD_TRACE(args)
+#define DHD_INFO(args)
+#define DHD_DATA(args)
+#define DHD_CTL(args)
+#define DHD_TIMER(args)
+#define DHD_HDRS(args)
+#define DHD_BYTES(args)
+#define DHD_INTR(args)
+#define DHD_GLOM(args)
+#define DHD_EVENT(args)
+#define DHD_BTA(args)
+#define DHD_ISCAN(args)
+
+#define DHD_ERROR_ON() 0
+#define DHD_TRACE_ON() 0
+#define DHD_INFO_ON() 0
+#define DHD_DATA_ON() 0
+#define DHD_CTL_ON() 0
+#define DHD_TIMER_ON() 0
+#define DHD_HDRS_ON() 0
+#define DHD_BYTES_ON() 0
+#define DHD_INTR_ON() 0
+#define DHD_GLOM_ON() 0
+#define DHD_EVENT_ON() 0
+#define DHD_BTA_ON() 0
+#define DHD_ISCAN_ON() 0
+#endif /* DHD_DEBUG */
+
+#define DHD_LOG(args)
+
+#define DHD_NONE(args)
+extern int dhd_msg_level;
+
+/* Defines msg bits */
+#include <dhdioctl.h>
+
+#endif /* _dhd_dbg_ */
diff --git a/drivers/net/wireless/bcm4329/dhd_linux.c b/drivers/net/wireless/bcm4329/dhd_linux.c
new file mode 100644
index 0000000..c7ef3ed
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dhd_linux.c
@@ -0,0 +1,3308 @@
+/*
+ * Broadcom Dongle Host Driver (DHD), Linux-specific network interface
+ * Basically selected code segments from usb-cdc.c and usb-rndis.c
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhd_linux.c,v 1.65.4.9.2.12.2.104.4.35 2010/11/17 03:13:21 Exp $
+ */
+
+#ifdef CONFIG_WIFI_CONTROL_FUNC
+#include <linux/platform_device.h>
+#endif
+#include <typedefs.h>
+#include <linuxver.h>
+#include <osl.h>
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/random.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/fcntl.h>
+#include <linux/fs.h>
+
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+
+#include <epivers.h>
+#include <bcmutils.h>
+#include <bcmendian.h>
+
+#include <proto/ethernet.h>
+#include <dngl_stats.h>
+#include <dhd.h>
+#include <dhd_bus.h>
+#include <dhd_proto.h>
+#include <dhd_dbg.h>
+#include <wl_iw.h>
+#ifdef CONFIG_HAS_WAKELOCK
+#include <linux/wakelock.h>
+#endif
+#if defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC)
+#include <linux/wlan_plat.h>
+
+struct semaphore wifi_control_sem;
+
+struct dhd_bus *g_bus;
+
+static struct wifi_platform_data *wifi_control_data = NULL;
+static struct resource *wifi_irqres = NULL;
+
+int wifi_get_irq_number(unsigned long *irq_flags_ptr)
+{
+ if (wifi_irqres) {
+ *irq_flags_ptr = wifi_irqres->flags & IRQF_TRIGGER_MASK;
+ return (int)wifi_irqres->start;
+ }
+#ifdef CUSTOM_OOB_GPIO_NUM
+ return CUSTOM_OOB_GPIO_NUM;
+#else
+ return -1;
+#endif
+}
+
+int wifi_set_carddetect(int on)
+{
+ printk("%s = %d\n", __FUNCTION__, on);
+ if (wifi_control_data && wifi_control_data->set_carddetect) {
+ wifi_control_data->set_carddetect(on);
+ }
+ return 0;
+}
+
+int wifi_set_power(int on, unsigned long msec)
+{
+ printk("%s = %d\n", __FUNCTION__, on);
+ if (wifi_control_data && wifi_control_data->set_power) {
+ wifi_control_data->set_power(on);
+ }
+ if (msec)
+ mdelay(msec);
+ return 0;
+}
+
+int wifi_set_reset(int on, unsigned long msec)
+{
+ DHD_TRACE(("%s = %d\n", __FUNCTION__, on));
+ if (wifi_control_data && wifi_control_data->set_reset) {
+ wifi_control_data->set_reset(on);
+ }
+ if (msec)
+ mdelay(msec);
+ return 0;
+}
+
+int wifi_get_mac_addr(unsigned char *buf)
+{
+ DHD_TRACE(("%s\n", __FUNCTION__));
+ if (!buf)
+ return -EINVAL;
+ if (wifi_control_data && wifi_control_data->get_mac_addr) {
+ return wifi_control_data->get_mac_addr(buf);
+ }
+ return -EOPNOTSUPP;
+}
+
+static int wifi_probe(struct platform_device *pdev)
+{
+ struct wifi_platform_data *wifi_ctrl =
+ (struct wifi_platform_data *)(pdev->dev.platform_data);
+
+ DHD_TRACE(("## %s\n", __FUNCTION__));
+ wifi_irqres = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "bcm4329_wlan_irq");
+ wifi_control_data = wifi_ctrl;
+
+ wifi_set_power(1, 0); /* Power On */
+ wifi_set_carddetect(1); /* CardDetect (0->1) */
+
+ up(&wifi_control_sem);
+ return 0;
+}
+
+static int wifi_remove(struct platform_device *pdev)
+{
+ struct wifi_platform_data *wifi_ctrl =
+ (struct wifi_platform_data *)(pdev->dev.platform_data);
+
+ DHD_TRACE(("## %s\n", __FUNCTION__));
+ wifi_control_data = wifi_ctrl;
+
+ wifi_set_power(0, 0); /* Power Off */
+ wifi_set_carddetect(0); /* CardDetect (1->0) */
+
+ up(&wifi_control_sem);
+ return 0;
+}
+static int wifi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ DHD_TRACE(("##> %s\n", __FUNCTION__));
+ return 0;
+}
+static int wifi_resume(struct platform_device *pdev)
+{
+ DHD_TRACE(("##> %s\n", __FUNCTION__));
+ return 0;
+}
+
+static struct platform_driver wifi_device = {
+ .probe = wifi_probe,
+ .remove = wifi_remove,
+ .suspend = wifi_suspend,
+ .resume = wifi_resume,
+ .driver = {
+ .name = "bcm4329_wlan",
+ }
+};
+
+int wifi_add_dev(void)
+{
+ DHD_TRACE(("## Calling platform_driver_register\n"));
+ return platform_driver_register(&wifi_device);
+}
+
+void wifi_del_dev(void)
+{
+ DHD_TRACE(("## Unregister platform_driver_register\n"));
+ platform_driver_unregister(&wifi_device);
+}
+#endif /* defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC) */
+
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP)
+#include <linux/suspend.h>
+volatile bool dhd_mmc_suspend = FALSE;
+DECLARE_WAIT_QUEUE_HEAD(dhd_dpc_wait);
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP) */
+
+#if defined(OOB_INTR_ONLY)
+extern void dhd_enable_oob_intr(struct dhd_bus *bus, bool enable);
+#endif /* defined(OOB_INTR_ONLY) */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0))
+MODULE_LICENSE("GPL v2");
+#endif /* LinuxVer */
+
+#if LINUX_VERSION_CODE == KERNEL_VERSION(2, 6, 15)
+const char *
+print_tainted()
+{
+ return "";
+}
+#endif /* LINUX_VERSION_CODE == KERNEL_VERSION(2, 6, 15) */
+
+/* Linux wireless extension support */
+#if defined(CONFIG_WIRELESS_EXT)
+#include <wl_iw.h>
+#endif /* defined(CONFIG_WIRELESS_EXT) */
+
+extern int dhdcdc_set_ioctl(dhd_pub_t *dhd, int ifidx, uint cmd, void *buf, uint len);
+
+#if defined(CONFIG_HAS_EARLYSUSPEND)
+#include <linux/earlysuspend.h>
+#endif /* defined(CONFIG_HAS_EARLYSUSPEND) */
+
+#ifdef PKT_FILTER_SUPPORT
+extern void dhd_pktfilter_offload_set(dhd_pub_t * dhd, char *arg);
+extern void dhd_pktfilter_offload_enable(dhd_pub_t * dhd, char *arg, int enable, int master_mode);
+#endif
+
+/* Interface control information */
+typedef struct dhd_if {
+ struct dhd_info *info; /* back pointer to dhd_info */
+ /* OS/stack specifics */
+ struct net_device *net;
+ struct net_device_stats stats;
+ int idx; /* iface idx in dongle */
+ int state; /* interface state */
+ uint subunit; /* subunit */
+ uint8 mac_addr[ETHER_ADDR_LEN]; /* assigned MAC address */
+ bool attached; /* Delayed attachment when unset */
+ bool txflowcontrol; /* Per interface flow control indicator */
+ char name[IFNAMSIZ+1]; /* linux interface name */
+} dhd_if_t;
+
+/* Local private structure (extension of pub) */
+typedef struct dhd_info {
+#if defined(CONFIG_WIRELESS_EXT)
+ wl_iw_t iw; /* wireless extensions state (must be first) */
+#endif /* defined(CONFIG_WIRELESS_EXT) */
+
+ dhd_pub_t pub;
+
+ /* OS/stack specifics */
+ dhd_if_t *iflist[DHD_MAX_IFS];
+
+ struct semaphore proto_sem;
+ wait_queue_head_t ioctl_resp_wait;
+ struct timer_list timer;
+ bool wd_timer_valid;
+ struct tasklet_struct tasklet;
+ spinlock_t sdlock;
+ spinlock_t txqlock;
+ spinlock_t dhd_lock;
+
+ /* Thread based operation */
+ bool threads_only;
+ struct semaphore sdsem;
+ long watchdog_pid;
+ struct semaphore watchdog_sem;
+ struct completion watchdog_exited;
+ long dpc_pid;
+ struct semaphore dpc_sem;
+ struct completion dpc_exited;
+
+ /* Wakelocks */
+#ifdef CONFIG_HAS_WAKELOCK
+ struct wake_lock wl_wifi; /* Wifi wakelock */
+ struct wake_lock wl_rxwake; /* Wifi rx wakelock */
+#endif
+ spinlock_t wl_lock;
+ int wl_count;
+ int wl_packet;
+
+ int hang_was_sent; /* flag that message was send at least once */
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 25))
+ struct mutex wl_start_lock; /* mutex when START called to prevent any other Linux calls */
+#endif
+ /* Thread to issue ioctl for multicast */
+ long sysioc_pid;
+ struct semaphore sysioc_sem;
+ struct completion sysioc_exited;
+ bool set_multicast;
+ bool set_macaddress;
+ struct ether_addr macvalue;
+ wait_queue_head_t ctrl_wait;
+ atomic_t pend_8021x_cnt;
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ struct early_suspend early_suspend;
+#endif /* CONFIG_HAS_EARLYSUSPEND */
+} dhd_info_t;
+
+/* Definitions to provide path to the firmware and nvram
+ * example nvram_path[MOD_PARAM_PATHLEN]="/projects/wlan/nvram.txt"
+ */
+char firmware_path[MOD_PARAM_PATHLEN];
+char nvram_path[MOD_PARAM_PATHLEN];
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+struct semaphore dhd_registration_sem;
+#define DHD_REGISTRATION_TIMEOUT 12000 /* msec : allowed time to finished dhd registration */
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) */
+/* load firmware and/or nvram values from the filesystem */
+module_param_string(firmware_path, firmware_path, MOD_PARAM_PATHLEN, 0);
+module_param_string(nvram_path, nvram_path, MOD_PARAM_PATHLEN, 0);
+
+/* Error bits */
+module_param(dhd_msg_level, int, 0);
+
+/* Spawn a thread for system ioctls (set mac, set mcast) */
+uint dhd_sysioc = TRUE;
+module_param(dhd_sysioc, uint, 0);
+
+/* Watchdog interval */
+uint dhd_watchdog_ms = 10;
+module_param(dhd_watchdog_ms, uint, 0);
+
+#ifdef DHD_DEBUG
+/* Console poll interval */
+uint dhd_console_ms = 0;
+module_param(dhd_console_ms, uint, 0);
+#endif /* DHD_DEBUG */
+
+/* ARP offload agent mode : Enable ARP Host Auto-Reply and ARP Peer Auto-Reply */
+uint dhd_arp_mode = 0xb;
+module_param(dhd_arp_mode, uint, 0);
+
+/* ARP offload enable */
+uint dhd_arp_enable = TRUE;
+module_param(dhd_arp_enable, uint, 0);
+
+/* Global Pkt filter enable control */
+uint dhd_pkt_filter_enable = TRUE;
+module_param(dhd_pkt_filter_enable, uint, 0);
+
+/* Pkt filter init setup */
+uint dhd_pkt_filter_init = 0;
+module_param(dhd_pkt_filter_init, uint, 0);
+
+/* Pkt filter mode control */
+uint dhd_master_mode = TRUE;
+module_param(dhd_master_mode, uint, 1);
+
+/* Watchdog thread priority, -1 to use kernel timer */
+int dhd_watchdog_prio = 97;
+module_param(dhd_watchdog_prio, int, 0);
+
+/* DPC thread priority, -1 to use tasklet */
+int dhd_dpc_prio = 98;
+module_param(dhd_dpc_prio, int, 0);
+
+/* DPC thread priority, -1 to use tasklet */
+extern int dhd_dongle_memsize;
+module_param(dhd_dongle_memsize, int, 0);
+
+/* Control fw roaming */
+#ifdef CUSTOMER_HW2
+uint dhd_roam = 0;
+#else
+uint dhd_roam = 1;
+#endif
+
+/* Control radio state */
+uint dhd_radio_up = 1;
+
+/* Network inteface name */
+char iface_name[IFNAMSIZ];
+module_param_string(iface_name, iface_name, IFNAMSIZ, 0);
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0))
+#define DAEMONIZE(a) daemonize(a); \
+ allow_signal(SIGKILL); \
+ allow_signal(SIGTERM);
+#else /* Linux 2.4 (w/o preemption patch) */
+#define RAISE_RX_SOFTIRQ() \
+ cpu_raise_softirq(smp_processor_id(), NET_RX_SOFTIRQ)
+#define DAEMONIZE(a) daemonize(); \
+ do { if (a) \
+ strncpy(current->comm, a, MIN(sizeof(current->comm), (strlen(a) + 1))); \
+ } while (0);
+#endif /* LINUX_VERSION_CODE */
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0))
+#define BLOCKABLE() (!in_atomic())
+#else
+#define BLOCKABLE() (!in_interrupt())
+#endif
+
+/* The following are specific to the SDIO dongle */
+
+/* IOCTL response timeout */
+int dhd_ioctl_timeout_msec = IOCTL_RESP_TIMEOUT;
+
+/* Idle timeout for backplane clock */
+int dhd_idletime = DHD_IDLETIME_TICKS;
+module_param(dhd_idletime, int, 0);
+
+/* Use polling */
+uint dhd_poll = FALSE;
+module_param(dhd_poll, uint, 0);
+
+/* Use interrupts */
+uint dhd_intr = TRUE;
+module_param(dhd_intr, uint, 0);
+
+/* SDIO Drive Strength (in milliamps) */
+uint dhd_sdiod_drive_strength = 6;
+module_param(dhd_sdiod_drive_strength, uint, 0);
+
+/* Tx/Rx bounds */
+extern uint dhd_txbound;
+extern uint dhd_rxbound;
+module_param(dhd_txbound, uint, 0);
+module_param(dhd_rxbound, uint, 0);
+
+/* Deferred transmits */
+extern uint dhd_deferred_tx;
+module_param(dhd_deferred_tx, uint, 0);
+
+
+
+#ifdef SDTEST
+/* Echo packet generator (pkts/s) */
+uint dhd_pktgen = 0;
+module_param(dhd_pktgen, uint, 0);
+
+/* Echo packet len (0 => sawtooth, max 2040) */
+uint dhd_pktgen_len = 0;
+module_param(dhd_pktgen_len, uint, 0);
+#endif
+
+/* Version string to report */
+#ifdef DHD_DEBUG
+#ifndef SRCBASE
+#define SRCBASE "drivers/net/wireless/bcm4329"
+#endif
+#define DHD_COMPILED "\nCompiled in " SRCBASE
+#else
+#define DHD_COMPILED
+#endif
+
+static char dhd_version[] = "Dongle Host Driver, version " EPI_VERSION_STR
+#ifdef DHD_DEBUG
+"\nCompiled in " SRCBASE " on " __DATE__ " at " __TIME__
+#endif
+;
+
+
+#if defined(CONFIG_WIRELESS_EXT)
+struct iw_statistics *dhd_get_wireless_stats(struct net_device *dev);
+#endif /* defined(CONFIG_WIRELESS_EXT) */
+
+static void dhd_dpc(ulong data);
+/* forward decl */
+extern int dhd_wait_pend8021x(struct net_device *dev);
+
+#ifdef TOE
+#ifndef BDC
+#error TOE requires BDC
+#endif /* !BDC */
+static int dhd_toe_get(dhd_info_t *dhd, int idx, uint32 *toe_ol);
+static int dhd_toe_set(dhd_info_t *dhd, int idx, uint32 toe_ol);
+#endif /* TOE */
+
+static int dhd_wl_host_event(dhd_info_t *dhd, int *ifidx, void *pktdata,
+ wl_event_msg_t *event_ptr, void **data_ptr);
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP)
+static int dhd_sleep_pm_callback(struct notifier_block *nfb, unsigned long action, void *ignored)
+{
+ int ret = NOTIFY_DONE;
+
+ switch (action) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_SUSPEND_PREPARE:
+ dhd_mmc_suspend = TRUE;
+ ret = NOTIFY_OK;
+ break;
+ case PM_POST_HIBERNATION:
+ case PM_POST_SUSPEND:
+ dhd_mmc_suspend = FALSE;
+ ret = NOTIFY_OK;
+ break;
+ }
+ smp_mb();
+ return ret;
+}
+
+static struct notifier_block dhd_sleep_pm_notifier = {
+ .notifier_call = dhd_sleep_pm_callback,
+ .priority = 0
+};
+extern int register_pm_notifier(struct notifier_block *nb);
+extern int unregister_pm_notifier(struct notifier_block *nb);
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP) */
+
+static void dhd_set_packet_filter(int value, dhd_pub_t *dhd)
+{
+#ifdef PKT_FILTER_SUPPORT
+ DHD_TRACE(("%s: %d\n", __FUNCTION__, value));
+ /* 1 - Enable packet filter, only allow unicast packet to send up */
+ /* 0 - Disable packet filter */
+ if (dhd_pkt_filter_enable) {
+ int i;
+
+ for (i = 0; i < dhd->pktfilter_count; i++) {
+ dhd_pktfilter_offload_set(dhd, dhd->pktfilter[i]);
+ dhd_pktfilter_offload_enable(dhd, dhd->pktfilter[i],
+ value, dhd_master_mode);
+ }
+ }
+#endif
+}
+
+
+
+#if defined(CONFIG_HAS_EARLYSUSPEND)
+static int dhd_set_suspend(int value, dhd_pub_t *dhd)
+{
+ int power_mode = PM_MAX;
+ /* wl_pkt_filter_enable_t enable_parm; */
+ char iovbuf[32];
+ int bcn_li_dtim = 3;
+#ifdef CUSTOMER_HW2
+ uint roamvar = 1;
+#endif /* CUSTOMER_HW2 */
+
+ DHD_TRACE(("%s: enter, value = %d in_suspend = %d\n",
+ __FUNCTION__, value, dhd->in_suspend));
+
+ if (dhd && dhd->up) {
+ if (value && dhd->in_suspend) {
+
+ /* Kernel suspended */
+ DHD_TRACE(("%s: force extra Suspend setting \n", __FUNCTION__));
+
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_PM,
+ (char *)&power_mode, sizeof(power_mode));
+
+ /* Enable packet filter, only allow unicast packet to send up */
+ dhd_set_packet_filter(1, dhd);
+
+ /* if dtim skip setup as default force it to wake each thrid dtim
+ * for better power saving.
+ * Note that side effect is chance to miss BC/MC packet
+ */
+ bcn_li_dtim = dhd_get_dtim_skip(dhd);
+ bcm_mkiovar("bcn_li_dtim", (char *)&bcn_li_dtim,
+ 4, iovbuf, sizeof(iovbuf));
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+#ifdef CUSTOMER_HW2
+ /* Disable build-in roaming during suspend */
+ bcm_mkiovar("roam_off", (char *)&roamvar, 4, iovbuf, sizeof(iovbuf));
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+#endif /* CUSTOMER_HW2 */
+
+ } else {
+
+ /* Kernel resumed */
+ DHD_TRACE(("%s: Remove extra suspend setting \n", __FUNCTION__));
+
+ power_mode = PM_FAST;
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_PM, (char *)&power_mode,
+ sizeof(power_mode));
+
+ /* disable pkt filter */
+ dhd_set_packet_filter(0, dhd);
+
+ /* restore pre-suspend setting for dtim_skip */
+ bcm_mkiovar("bcn_li_dtim", (char *)&dhd->dtim_skip,
+ 4, iovbuf, sizeof(iovbuf));
+
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+#ifdef CUSTOMER_HW2
+ roamvar = dhd_roam;
+ bcm_mkiovar("roam_off", (char *)&roamvar, 4, iovbuf, sizeof(iovbuf));
+ dhdcdc_set_ioctl(dhd, 0, WLC_SET_VAR, iovbuf, sizeof(iovbuf));
+#endif /* CUSTOMER_HW2 */
+ }
+ }
+
+ return 0;
+}
+
+static void dhd_suspend_resume_helper(struct dhd_info *dhd, int val)
+{
+ dhd_pub_t *dhdp = &dhd->pub;
+
+ dhd_os_wake_lock(dhdp);
+ dhd_os_proto_block(dhdp);
+ /* Set flag when early suspend was called */
+ dhdp->in_suspend = val;
+ if (!dhdp->suspend_disable_flag)
+ dhd_set_suspend(val, dhdp);
+ dhd_os_proto_unblock(dhdp);
+ dhd_os_wake_unlock(dhdp);
+}
+
+static void dhd_early_suspend(struct early_suspend *h)
+{
+ struct dhd_info *dhd = container_of(h, struct dhd_info, early_suspend);
+
+ DHD_TRACE(("%s: enter\n", __FUNCTION__));
+
+ if (dhd)
+ dhd_suspend_resume_helper(dhd, 1);
+}
+
+static void dhd_late_resume(struct early_suspend *h)
+{
+ struct dhd_info *dhd = container_of(h, struct dhd_info, early_suspend);
+
+ DHD_TRACE(("%s: enter\n", __FUNCTION__));
+
+ if (dhd)
+ dhd_suspend_resume_helper(dhd, 0);
+}
+#endif /* defined(CONFIG_HAS_EARLYSUSPEND) */
+
+/*
+ * Generalized timeout mechanism. Uses spin sleep with exponential back-off until
+ * the sleep time reaches one jiffy, then switches over to task delay. Usage:
+ *
+ * dhd_timeout_start(&tmo, usec);
+ * while (!dhd_timeout_expired(&tmo))
+ * if (poll_something())
+ * break;
+ * if (dhd_timeout_expired(&tmo))
+ * fatal();
+ */
+
+void
+dhd_timeout_start(dhd_timeout_t *tmo, uint usec)
+{
+ tmo->limit = usec;
+ tmo->increment = 0;
+ tmo->elapsed = 0;
+ tmo->tick = 1000000 / HZ;
+}
+
+int
+dhd_timeout_expired(dhd_timeout_t *tmo)
+{
+ /* Does nothing the first call */
+ if (tmo->increment == 0) {
+ tmo->increment = 1;
+ return 0;
+ }
+
+ if (tmo->elapsed >= tmo->limit)
+ return 1;
+
+ /* Add the delay that's about to take place */
+ tmo->elapsed += tmo->increment;
+
+ if (tmo->increment < tmo->tick) {
+ OSL_DELAY(tmo->increment);
+ tmo->increment *= 2;
+ if (tmo->increment > tmo->tick)
+ tmo->increment = tmo->tick;
+ } else {
+ wait_queue_head_t delay_wait;
+ DECLARE_WAITQUEUE(wait, current);
+ int pending;
+ init_waitqueue_head(&delay_wait);
+ add_wait_queue(&delay_wait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ pending = signal_pending(current);
+ remove_wait_queue(&delay_wait, &wait);
+ set_current_state(TASK_RUNNING);
+ if (pending)
+ return 1; /* Interrupted */
+ }
+
+ return 0;
+}
+
+static int
+dhd_net2idx(dhd_info_t *dhd, struct net_device *net)
+{
+ int i = 0;
+
+ ASSERT(dhd);
+ while (i < DHD_MAX_IFS) {
+ if (dhd->iflist[i] && (dhd->iflist[i]->net == net))
+ return i;
+ i++;
+ }
+
+ return DHD_BAD_IF;
+}
+
+int
+dhd_ifname2idx(dhd_info_t *dhd, char *name)
+{
+ int i = DHD_MAX_IFS;
+
+ ASSERT(dhd);
+
+ if (name == NULL || *name == '\0')
+ return 0;
+
+ while (--i > 0)
+ if (dhd->iflist[i] && !strncmp(dhd->iflist[i]->name, name, IFNAMSIZ))
+ break;
+
+ DHD_TRACE(("%s: return idx %d for \"%s\"\n", __FUNCTION__, i, name));
+
+ return i; /* default - the primary interface */
+}
+
+char *
+dhd_ifname(dhd_pub_t *dhdp, int ifidx)
+{
+ dhd_info_t *dhd = (dhd_info_t *)dhdp->info;
+
+ ASSERT(dhd);
+
+ if (ifidx < 0 || ifidx >= DHD_MAX_IFS) {
+ DHD_ERROR(("%s: ifidx %d out of range\n", __FUNCTION__, ifidx));
+ return "<if_bad>";
+ }
+
+ if (dhd->iflist[ifidx] == NULL) {
+ DHD_ERROR(("%s: null i/f %d\n", __FUNCTION__, ifidx));
+ return "<if_null>";
+ }
+
+ if (dhd->iflist[ifidx]->net)
+ return dhd->iflist[ifidx]->net->name;
+
+ return "<if_none>";
+}
+
+static void
+_dhd_set_multicast_list(dhd_info_t *dhd, int ifidx)
+{
+ struct net_device *dev;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
+ struct netdev_hw_addr *ha;
+#else
+ struct dev_mc_list *mclist;
+#endif
+ uint32 allmulti, cnt;
+
+ wl_ioctl_t ioc;
+ char *buf, *bufp;
+ uint buflen;
+ int ret;
+
+ ASSERT(dhd && dhd->iflist[ifidx]);
+ dev = dhd->iflist[ifidx]->net;
+
+ netif_addr_lock_bh(dev);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
+ cnt = netdev_mc_count(dev);
+#else
+ cnt = dev->mc_count;
+#endif
+ netif_addr_unlock_bh(dev);
+
+ /* Determine initial value of allmulti flag */
+ allmulti = (dev->flags & IFF_ALLMULTI) ? TRUE : FALSE;
+
+ /* Send down the multicast list first. */
+ buflen = sizeof("mcast_list") + sizeof(cnt) + (cnt * ETHER_ADDR_LEN);
+ if (!(bufp = buf = MALLOC(dhd->pub.osh, buflen))) {
+ DHD_ERROR(("%s: out of memory for mcast_list, cnt %d\n",
+ dhd_ifname(&dhd->pub, ifidx), cnt));
+ return;
+ }
+
+ strcpy(bufp, "mcast_list");
+ bufp += strlen("mcast_list") + 1;
+
+ cnt = htol32(cnt);
+ memcpy(bufp, &cnt, sizeof(cnt));
+ bufp += sizeof(cnt);
+
+ netif_addr_lock_bh(dev);
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 35)
+ netdev_for_each_mc_addr(ha, dev) {
+ if (!cnt)
+ break;
+ memcpy(bufp, ha->addr, ETHER_ADDR_LEN);
+ bufp += ETHER_ADDR_LEN;
+ cnt--;
+ }
+#else
+ for (mclist = dev->mc_list;(mclist && (cnt > 0)); cnt--, mclist = mclist->next) {
+ memcpy(bufp, (void *)mclist->dmi_addr, ETHER_ADDR_LEN);
+ bufp += ETHER_ADDR_LEN;
+ }
+#endif
+ netif_addr_unlock_bh(dev);
+
+ memset(&ioc, 0, sizeof(ioc));
+ ioc.cmd = WLC_SET_VAR;
+ ioc.buf = buf;
+ ioc.len = buflen;
+ ioc.set = TRUE;
+
+ ret = dhd_prot_ioctl(&dhd->pub, ifidx, &ioc, ioc.buf, ioc.len);
+ if (ret < 0) {
+ DHD_ERROR(("%s: set mcast_list failed, cnt %d\n",
+ dhd_ifname(&dhd->pub, ifidx), cnt));
+ allmulti = cnt ? TRUE : allmulti;
+ }
+
+ MFREE(dhd->pub.osh, buf, buflen);
+
+ /* Now send the allmulti setting. This is based on the setting in the
+ * net_device flags, but might be modified above to be turned on if we
+ * were trying to set some addresses and dongle rejected it...
+ */
+
+ buflen = sizeof("allmulti") + sizeof(allmulti);
+ if (!(buf = MALLOC(dhd->pub.osh, buflen))) {
+ DHD_ERROR(("%s: out of memory for allmulti\n", dhd_ifname(&dhd->pub, ifidx)));
+ return;
+ }
+ allmulti = htol32(allmulti);
+
+ if (!bcm_mkiovar("allmulti", (void*)&allmulti, sizeof(allmulti), buf, buflen)) {
+ DHD_ERROR(("%s: mkiovar failed for allmulti, datalen %d buflen %u\n",
+ dhd_ifname(&dhd->pub, ifidx), (int)sizeof(allmulti), buflen));
+ MFREE(dhd->pub.osh, buf, buflen);
+ return;
+ }
+
+
+ memset(&ioc, 0, sizeof(ioc));
+ ioc.cmd = WLC_SET_VAR;
+ ioc.buf = buf;
+ ioc.len = buflen;
+ ioc.set = TRUE;
+
+ ret = dhd_prot_ioctl(&dhd->pub, ifidx, &ioc, ioc.buf, ioc.len);
+ if (ret < 0) {
+ DHD_ERROR(("%s: set allmulti %d failed\n",
+ dhd_ifname(&dhd->pub, ifidx), ltoh32(allmulti)));
+ }
+
+ MFREE(dhd->pub.osh, buf, buflen);
+
+ /* Finally, pick up the PROMISC flag as well, like the NIC driver does */
+
+ allmulti = (dev->flags & IFF_PROMISC) ? TRUE : FALSE;
+ allmulti = htol32(allmulti);
+
+ memset(&ioc, 0, sizeof(ioc));
+ ioc.cmd = WLC_SET_PROMISC;
+ ioc.buf = &allmulti;
+ ioc.len = sizeof(allmulti);
+ ioc.set = TRUE;
+
+ ret = dhd_prot_ioctl(&dhd->pub, ifidx, &ioc, ioc.buf, ioc.len);
+ if (ret < 0) {
+ DHD_ERROR(("%s: set promisc %d failed\n",
+ dhd_ifname(&dhd->pub, ifidx), ltoh32(allmulti)));
+ }
+}
+
+static int
+_dhd_set_mac_address(dhd_info_t *dhd, int ifidx, struct ether_addr *addr)
+{
+ char buf[32];
+ wl_ioctl_t ioc;
+ int ret;
+
+ DHD_TRACE(("%s enter\n", __FUNCTION__));
+ if (!bcm_mkiovar("cur_etheraddr", (char*)addr, ETHER_ADDR_LEN, buf, 32)) {
+ DHD_ERROR(("%s: mkiovar failed for cur_etheraddr\n", dhd_ifname(&dhd->pub, ifidx)));
+ return -1;
+ }
+ memset(&ioc, 0, sizeof(ioc));
+ ioc.cmd = WLC_SET_VAR;
+ ioc.buf = buf;
+ ioc.len = 32;
+ ioc.set = TRUE;
+
+ ret = dhd_prot_ioctl(&dhd->pub, ifidx, &ioc, ioc.buf, ioc.len);
+ if (ret < 0) {
+ DHD_ERROR(("%s: set cur_etheraddr failed\n", dhd_ifname(&dhd->pub, ifidx)));
+ } else {
+ memcpy(dhd->iflist[ifidx]->net->dev_addr, addr, ETHER_ADDR_LEN);
+ }
+
+ return ret;
+}
+
+#ifdef SOFTAP
+extern struct net_device *ap_net_dev;
+/* semaphore that the soft AP CODE waits on */
+extern struct semaphore ap_eth_sema;
+#endif
+
+static void
+dhd_op_if(dhd_if_t *ifp)
+{
+ dhd_info_t *dhd;
+ int ret = 0, err = 0;
+#ifdef SOFTAP
+ unsigned long flags;
+#endif
+
+ ASSERT(ifp && ifp->info && ifp->idx); /* Virtual interfaces only */
+
+ dhd = ifp->info;
+
+ DHD_TRACE(("%s: idx %d, state %d\n", __FUNCTION__, ifp->idx, ifp->state));
+
+ switch (ifp->state) {
+ case WLC_E_IF_ADD:
+ /*
+ * Delete the existing interface before overwriting it
+ * in case we missed the WLC_E_IF_DEL event.
+ */
+ if (ifp->net != NULL) {
+ DHD_ERROR(("%s: ERROR: netdev:%s already exists, try free & unregister \n",
+ __FUNCTION__, ifp->net->name));
+ netif_stop_queue(ifp->net);
+ unregister_netdev(ifp->net);
+ free_netdev(ifp->net);
+ }
+ /* Allocate etherdev, including space for private structure */
+ if (!(ifp->net = alloc_etherdev(sizeof(dhd)))) {
+ DHD_ERROR(("%s: OOM - alloc_etherdev\n", __FUNCTION__));
+ ret = -ENOMEM;
+ }
+ if (ret == 0) {
+ strcpy(ifp->net->name, ifp->name);
+ memcpy(netdev_priv(ifp->net), &dhd, sizeof(dhd));
+ if ((err = dhd_net_attach(&dhd->pub, ifp->idx)) != 0) {
+ DHD_ERROR(("%s: dhd_net_attach failed, err %d\n",
+ __FUNCTION__, err));
+ ret = -EOPNOTSUPP;
+ } else {
+#ifdef SOFTAP
+ flags = dhd_os_spin_lock(&dhd->pub);
+ /* save ptr to wl0.1 netdev for use in wl_iw.c */
+ ap_net_dev = ifp->net;
+ /* signal to the SOFTAP 'sleeper' thread, wl0.1 is ready */
+ up(&ap_eth_sema);
+ dhd_os_spin_unlock(&dhd->pub, flags);
+#endif
+ DHD_TRACE(("\n ==== pid:%x, net_device for if:%s created ===\n\n",
+ current->pid, ifp->net->name));
+ ifp->state = 0;
+ }
+ }
+ break;
+ case WLC_E_IF_DEL:
+ if (ifp->net != NULL) {
+ DHD_TRACE(("\n%s: got 'WLC_E_IF_DEL' state\n", __FUNCTION__));
+ netif_stop_queue(ifp->net);
+ unregister_netdev(ifp->net);
+ ret = DHD_DEL_IF; /* Make sure the free_netdev() is called */
+ }
+ break;
+ default:
+ DHD_ERROR(("%s: bad op %d\n", __FUNCTION__, ifp->state));
+ ASSERT(!ifp->state);
+ break;
+ }
+
+ if (ret < 0) {
+ if (ifp->net) {
+ free_netdev(ifp->net);
+ }
+ dhd->iflist[ifp->idx] = NULL;
+ MFREE(dhd->pub.osh, ifp, sizeof(*ifp));
+#ifdef SOFTAP
+ flags = dhd_os_spin_lock(&dhd->pub);
+ if (ifp->net == ap_net_dev)
+ ap_net_dev = NULL; /* NULL SOFTAP global as well */
+ dhd_os_spin_unlock(&dhd->pub, flags);
+#endif /* SOFTAP */
+ }
+}
+
+static int
+_dhd_sysioc_thread(void *data)
+{
+ dhd_info_t *dhd = (dhd_info_t *)data;
+ int i;
+#ifdef SOFTAP
+ bool in_ap = FALSE;
+ unsigned long flags;
+#endif
+
+ DAEMONIZE("dhd_sysioc");
+
+ while (down_interruptible(&dhd->sysioc_sem) == 0) {
+ dhd_os_start_lock(&dhd->pub);
+ dhd_os_wake_lock(&dhd->pub);
+ for (i = 0; i < DHD_MAX_IFS; i++) {
+ if (dhd->iflist[i]) {
+ DHD_TRACE(("%s: interface %d\n",__FUNCTION__, i));
+#ifdef SOFTAP
+ flags = dhd_os_spin_lock(&dhd->pub);
+ in_ap = (ap_net_dev != NULL);
+ dhd_os_spin_unlock(&dhd->pub, flags);
+#endif /* SOFTAP */
+ if (dhd->iflist[i]->state)
+ dhd_op_if(dhd->iflist[i]);
+#ifdef SOFTAP
+ if (dhd->iflist[i] == NULL) {
+ DHD_TRACE(("%s: interface %d just been removed!\n\n", __FUNCTION__, i));
+ continue;
+ }
+
+ if (in_ap && dhd->set_macaddress) {
+ DHD_TRACE(("attempt to set MAC for %s in AP Mode blocked.\n", dhd->iflist[i]->net->name));
+ dhd->set_macaddress = FALSE;
+ continue;
+ }
+
+ if (in_ap && dhd->set_multicast) {
+ DHD_TRACE(("attempt to set MULTICAST list for %s in AP Mode blocked.\n", dhd->iflist[i]->net->name));
+ dhd->set_multicast = FALSE;
+ continue;
+ }
+#endif /* SOFTAP */
+ if (dhd->set_multicast) {
+ dhd->set_multicast = FALSE;
+ _dhd_set_multicast_list(dhd, i);
+ }
+ if (dhd->set_macaddress) {
+ dhd->set_macaddress = FALSE;
+ _dhd_set_mac_address(dhd, i, &dhd->macvalue);
+ }
+ }
+ }
+ dhd_os_wake_unlock(&dhd->pub);
+ dhd_os_start_unlock(&dhd->pub);
+ }
+ DHD_TRACE(("%s: stopped\n",__FUNCTION__));
+ complete_and_exit(&dhd->sysioc_exited, 0);
+}
+
+static int
+dhd_set_mac_address(struct net_device *dev, void *addr)
+{
+ int ret = 0;
+
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+ struct sockaddr *sa = (struct sockaddr *)addr;
+ int ifidx;
+
+ DHD_TRACE(("%s: Enter\n",__FUNCTION__));
+ ifidx = dhd_net2idx(dhd, dev);
+ if (ifidx == DHD_BAD_IF)
+ return -1;
+
+ ASSERT(dhd->sysioc_pid >= 0);
+ memcpy(&dhd->macvalue, sa->sa_data, ETHER_ADDR_LEN);
+ dhd->set_macaddress = TRUE;
+ up(&dhd->sysioc_sem);
+
+ return ret;
+}
+
+static void
+dhd_set_multicast_list(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+ int ifidx;
+
+ DHD_TRACE(("%s: Enter\n",__FUNCTION__));
+ ifidx = dhd_net2idx(dhd, dev);
+ if (ifidx == DHD_BAD_IF)
+ return;
+
+ ASSERT(dhd->sysioc_pid >= 0);
+ dhd->set_multicast = TRUE;
+ up(&dhd->sysioc_sem);
+}
+
+int
+dhd_sendpkt(dhd_pub_t *dhdp, int ifidx, void *pktbuf)
+{
+ int ret;
+ dhd_info_t *dhd = (dhd_info_t *)(dhdp->info);
+
+ /* Reject if down */
+ if (!dhdp->up || (dhdp->busstate == DHD_BUS_DOWN)) {
+ return -ENODEV;
+ }
+
+ /* Update multicast statistic */
+ if (PKTLEN(dhdp->osh, pktbuf) >= ETHER_ADDR_LEN) {
+ uint8 *pktdata = (uint8 *)PKTDATA(dhdp->osh, pktbuf);
+ struct ether_header *eh = (struct ether_header *)pktdata;
+
+ if (ETHER_ISMULTI(eh->ether_dhost))
+ dhdp->tx_multicast++;
+ if (ntoh16(eh->ether_type) == ETHER_TYPE_802_1X)
+ atomic_inc(&dhd->pend_8021x_cnt);
+ }
+
+ /* Look into the packet and update the packet priority */
+ if ((PKTPRIO(pktbuf) == 0))
+ pktsetprio(pktbuf, FALSE);
+
+ /* If the protocol uses a data header, apply it */
+ dhd_prot_hdrpush(dhdp, ifidx, pktbuf);
+
+ /* Use bus module to send data frame */
+#ifdef BCMDBUS
+ ret = dbus_send_pkt(dhdp->dbus, pktbuf, NULL /* pktinfo */);
+#else
+ ret = dhd_bus_txdata(dhdp->bus, pktbuf);
+#endif /* BCMDBUS */
+
+ return ret;
+}
+
+static int
+dhd_start_xmit(struct sk_buff *skb, struct net_device *net)
+{
+ int ret;
+ void *pktbuf;
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(net);
+ int ifidx;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ dhd_os_wake_lock(&dhd->pub);
+
+ /* Reject if down */
+ if (!dhd->pub.up || (dhd->pub.busstate == DHD_BUS_DOWN)) {
+ DHD_ERROR(("%s: xmit rejected pub.up=%d busstate=%d\n",
+ __FUNCTION__, dhd->pub.up, dhd->pub.busstate));
+ netif_stop_queue(net);
+ /* Send Event when bus down detected during data session */
+ if (dhd->pub.busstate == DHD_BUS_DOWN) {
+ DHD_ERROR(("%s: Event HANG send up\n", __FUNCTION__));
+ net_os_send_hang_message(net);
+ }
+ dhd_os_wake_unlock(&dhd->pub);
+ return -ENODEV;
+ }
+
+ ifidx = dhd_net2idx(dhd, net);
+ if (ifidx == DHD_BAD_IF) {
+ DHD_ERROR(("%s: bad ifidx %d\n", __FUNCTION__, ifidx));
+ netif_stop_queue(net);
+ dhd_os_wake_unlock(&dhd->pub);
+ return -ENODEV;
+ }
+
+ /* Make sure there's enough room for any header */
+ if (skb_headroom(skb) < dhd->pub.hdrlen) {
+ struct sk_buff *skb2;
+
+ DHD_INFO(("%s: insufficient headroom\n",
+ dhd_ifname(&dhd->pub, ifidx)));
+ dhd->pub.tx_realloc++;
+ skb2 = skb_realloc_headroom(skb, dhd->pub.hdrlen);
+ dev_kfree_skb(skb);
+ if ((skb = skb2) == NULL) {
+ DHD_ERROR(("%s: skb_realloc_headroom failed\n",
+ dhd_ifname(&dhd->pub, ifidx)));
+ ret = -ENOMEM;
+ goto done;
+ }
+ }
+
+ /* Convert to packet */
+ if (!(pktbuf = PKTFRMNATIVE(dhd->pub.osh, skb))) {
+ DHD_ERROR(("%s: PKTFRMNATIVE failed\n",
+ dhd_ifname(&dhd->pub, ifidx)));
+ dev_kfree_skb_any(skb);
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ ret = dhd_sendpkt(&dhd->pub, ifidx, pktbuf);
+
+done:
+ if (ret)
+ dhd->pub.dstats.tx_dropped++;
+ else
+ dhd->pub.tx_packets++;
+
+ dhd_os_wake_unlock(&dhd->pub);
+
+ /* Return ok: we always eat the packet */
+ return 0;
+}
+
+void
+dhd_txflowcontrol(dhd_pub_t *dhdp, int ifidx, bool state)
+{
+ struct net_device *net;
+ dhd_info_t *dhd = dhdp->info;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ dhdp->txoff = state;
+ ASSERT(dhd && dhd->iflist[ifidx]);
+ net = dhd->iflist[ifidx]->net;
+ if (state == ON)
+ netif_stop_queue(net);
+ else
+ netif_wake_queue(net);
+}
+
+void
+dhd_rx_frame(dhd_pub_t *dhdp, int ifidx, void *pktbuf, int numpkt)
+{
+ dhd_info_t *dhd = (dhd_info_t *)dhdp->info;
+ struct sk_buff *skb;
+ uchar *eth;
+ uint len;
+ void * data, *pnext, *save_pktbuf;
+ int i;
+ dhd_if_t *ifp;
+ wl_event_msg_t event;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ save_pktbuf = pktbuf;
+
+ for (i = 0; pktbuf && i < numpkt; i++, pktbuf = pnext) {
+
+ pnext = PKTNEXT(dhdp->osh, pktbuf);
+ PKTSETNEXT(wl->sh.osh, pktbuf, NULL);
+
+
+ skb = PKTTONATIVE(dhdp->osh, pktbuf);
+
+ /* Get the protocol, maintain skb around eth_type_trans()
+ * The main reason for this hack is for the limitation of
+ * Linux 2.4 where 'eth_type_trans' uses the 'net->hard_header_len'
+ * to perform skb_pull inside vs ETH_HLEN. Since to avoid
+ * coping of the packet coming from the network stack to add
+ * BDC, Hardware header etc, during network interface registration
+ * we set the 'net->hard_header_len' to ETH_HLEN + extra space required
+ * for BDC, Hardware header etc. and not just the ETH_HLEN
+ */
+ eth = skb->data;
+ len = skb->len;
+
+ ifp = dhd->iflist[ifidx];
+ if (ifp == NULL)
+ ifp = dhd->iflist[0];
+
+ ASSERT(ifp);
+ skb->dev = ifp->net;
+ skb->protocol = eth_type_trans(skb, skb->dev);
+
+ if (skb->pkt_type == PACKET_MULTICAST) {
+ dhd->pub.rx_multicast++;
+ }
+
+ skb->data = eth;
+ skb->len = len;
+
+ /* Strip header, count, deliver upward */
+ skb_pull(skb, ETH_HLEN);
+
+ /* Process special event packets and then discard them */
+ if (ntoh16(skb->protocol) == ETHER_TYPE_BRCM)
+ dhd_wl_host_event(dhd, &ifidx,
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 24)
+ skb->mac_header,
+#else
+ skb->mac.raw,
+#endif
+ &event,
+ &data);
+
+ ASSERT(ifidx < DHD_MAX_IFS && dhd->iflist[ifidx]);
+ if (dhd->iflist[ifidx] && !dhd->iflist[ifidx]->state)
+ ifp = dhd->iflist[ifidx];
+
+ if (ifp->net)
+ ifp->net->last_rx = jiffies;
+
+ dhdp->dstats.rx_bytes += skb->len;
+ dhdp->rx_packets++; /* Local count */
+
+ if (in_interrupt()) {
+ netif_rx(skb);
+ } else {
+ /* If the receive is not processed inside an ISR,
+ * the softirqd must be woken explicitly to service
+ * the NET_RX_SOFTIRQ. In 2.6 kernels, this is handled
+ * by netif_rx_ni(), but in earlier kernels, we need
+ * to do it manually.
+ */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
+ netif_rx_ni(skb);
+#else
+ ulong flags;
+ netif_rx(skb);
+ local_irq_save(flags);
+ RAISE_RX_SOFTIRQ();
+ local_irq_restore(flags);
+#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0) */
+ }
+ }
+ dhd_os_wake_lock_timeout_enable(dhdp);
+}
+
+void
+dhd_event(struct dhd_info *dhd, char *evpkt, int evlen, int ifidx)
+{
+ /* Linux version has nothing to do */
+ return;
+}
+
+void
+dhd_txcomplete(dhd_pub_t *dhdp, void *txp, bool success)
+{
+ uint ifidx;
+ dhd_info_t *dhd = (dhd_info_t *)(dhdp->info);
+ struct ether_header *eh;
+ uint16 type;
+
+ dhd_prot_hdrpull(dhdp, &ifidx, txp);
+
+ eh = (struct ether_header *)PKTDATA(dhdp->osh, txp);
+ type = ntoh16(eh->ether_type);
+
+ if (type == ETHER_TYPE_802_1X)
+ atomic_dec(&dhd->pend_8021x_cnt);
+
+}
+
+static struct net_device_stats *
+dhd_get_stats(struct net_device *net)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(net);
+ dhd_if_t *ifp;
+ int ifidx;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ ifidx = dhd_net2idx(dhd, net);
+ if (ifidx == DHD_BAD_IF)
+ return NULL;
+
+ ifp = dhd->iflist[ifidx];
+ ASSERT(dhd && ifp);
+
+ if (dhd->pub.up) {
+ /* Use the protocol to get dongle stats */
+ dhd_prot_dstats(&dhd->pub);
+ }
+
+ /* Copy dongle stats to net device stats */
+ ifp->stats.rx_packets = dhd->pub.dstats.rx_packets;
+ ifp->stats.tx_packets = dhd->pub.dstats.tx_packets;
+ ifp->stats.rx_bytes = dhd->pub.dstats.rx_bytes;
+ ifp->stats.tx_bytes = dhd->pub.dstats.tx_bytes;
+ ifp->stats.rx_errors = dhd->pub.dstats.rx_errors;
+ ifp->stats.tx_errors = dhd->pub.dstats.tx_errors;
+ ifp->stats.rx_dropped = dhd->pub.dstats.rx_dropped;
+ ifp->stats.tx_dropped = dhd->pub.dstats.tx_dropped;
+ ifp->stats.multicast = dhd->pub.dstats.multicast;
+
+ return &ifp->stats;
+}
+
+static int
+dhd_watchdog_thread(void *data)
+{
+ dhd_info_t *dhd = (dhd_info_t *)data;
+
+ /* This thread doesn't need any user-level access,
+ * so get rid of all our resources
+ */
+#ifdef DHD_SCHED
+ if (dhd_watchdog_prio > 0) {
+ struct sched_param param;
+ param.sched_priority = (dhd_watchdog_prio < MAX_RT_PRIO)?
+ dhd_watchdog_prio:(MAX_RT_PRIO-1);
+ setScheduler(current, SCHED_FIFO, ¶m);
+ }
+#endif /* DHD_SCHED */
+
+ DAEMONIZE("dhd_watchdog");
+
+ /* Run until signal received */
+ while (1) {
+ if (down_interruptible (&dhd->watchdog_sem) == 0) {
+ dhd_os_sdlock(&dhd->pub);
+ if (dhd->pub.dongle_reset == FALSE) {
+ DHD_TIMER(("%s:\n", __FUNCTION__));
+ /* Call the bus module watchdog */
+ dhd_bus_watchdog(&dhd->pub);
+
+ /* Count the tick for reference */
+ dhd->pub.tickcnt++;
+
+ /* Reschedule the watchdog */
+ if (dhd->wd_timer_valid)
+ mod_timer(&dhd->timer, jiffies + dhd_watchdog_ms * HZ / 1000);
+ }
+ dhd_os_sdunlock(&dhd->pub);
+ dhd_os_wake_unlock(&dhd->pub);
+ } else {
+ break;
+ }
+ }
+
+ complete_and_exit(&dhd->watchdog_exited, 0);
+}
+
+static void
+dhd_watchdog(ulong data)
+{
+ dhd_info_t *dhd = (dhd_info_t *)data;
+
+ dhd_os_wake_lock(&dhd->pub);
+ if (dhd->pub.dongle_reset) {
+ dhd_os_wake_unlock(&dhd->pub);
+ return;
+ }
+
+ if (dhd->watchdog_pid >= 0) {
+ up(&dhd->watchdog_sem);
+ return;
+ }
+
+ dhd_os_sdlock(&dhd->pub);
+ /* Call the bus module watchdog */
+ dhd_bus_watchdog(&dhd->pub);
+
+ /* Count the tick for reference */
+ dhd->pub.tickcnt++;
+
+ /* Reschedule the watchdog */
+ if (dhd->wd_timer_valid)
+ mod_timer(&dhd->timer, jiffies + dhd_watchdog_ms * HZ / 1000);
+ dhd_os_sdunlock(&dhd->pub);
+ dhd_os_wake_unlock(&dhd->pub);
+}
+
+static int
+dhd_dpc_thread(void *data)
+{
+ dhd_info_t *dhd = (dhd_info_t *)data;
+
+ /* This thread doesn't need any user-level access,
+ * so get rid of all our resources
+ */
+#ifdef DHD_SCHED
+ if (dhd_dpc_prio > 0)
+ {
+ struct sched_param param;
+ param.sched_priority = (dhd_dpc_prio < MAX_RT_PRIO)?dhd_dpc_prio:(MAX_RT_PRIO-1);
+ setScheduler(current, SCHED_FIFO, ¶m);
+ }
+#endif /* DHD_SCHED */
+
+ DAEMONIZE("dhd_dpc");
+
+ /* Run until signal received */
+ while (1) {
+ if (down_interruptible(&dhd->dpc_sem) == 0) {
+ /* Call bus dpc unless it indicated down (then clean stop) */
+ if (dhd->pub.busstate != DHD_BUS_DOWN) {
+ if (dhd_bus_dpc(dhd->pub.bus)) {
+ up(&dhd->dpc_sem);
+ }
+ else {
+ dhd_os_wake_unlock(&dhd->pub);
+ }
+ } else {
+ dhd_bus_stop(dhd->pub.bus, TRUE);
+ dhd_os_wake_unlock(&dhd->pub);
+ }
+ }
+ else
+ break;
+ }
+
+ complete_and_exit(&dhd->dpc_exited, 0);
+}
+
+static void
+dhd_dpc(ulong data)
+{
+ dhd_info_t *dhd;
+
+ dhd = (dhd_info_t *)data;
+
+ /* Call bus dpc unless it indicated down (then clean stop) */
+ if (dhd->pub.busstate != DHD_BUS_DOWN) {
+ if (dhd_bus_dpc(dhd->pub.bus))
+ tasklet_schedule(&dhd->tasklet);
+ } else {
+ dhd_bus_stop(dhd->pub.bus, TRUE);
+ }
+}
+
+void
+dhd_sched_dpc(dhd_pub_t *dhdp)
+{
+ dhd_info_t *dhd = (dhd_info_t *)dhdp->info;
+
+ dhd_os_wake_lock(dhdp);
+ if (dhd->dpc_pid >= 0) {
+ up(&dhd->dpc_sem);
+ return;
+ }
+
+ tasklet_schedule(&dhd->tasklet);
+}
+
+#ifdef TOE
+/* Retrieve current toe component enables, which are kept as a bitmap in toe_ol iovar */
+static int
+dhd_toe_get(dhd_info_t *dhd, int ifidx, uint32 *toe_ol)
+{
+ wl_ioctl_t ioc;
+ char buf[32];
+ int ret;
+
+ memset(&ioc, 0, sizeof(ioc));
+
+ ioc.cmd = WLC_GET_VAR;
+ ioc.buf = buf;
+ ioc.len = (uint)sizeof(buf);
+ ioc.set = FALSE;
+
+ strcpy(buf, "toe_ol");
+ if ((ret = dhd_prot_ioctl(&dhd->pub, ifidx, &ioc, ioc.buf, ioc.len)) < 0) {
+ /* Check for older dongle image that doesn't support toe_ol */
+ if (ret == -EIO) {
+ DHD_ERROR(("%s: toe not supported by device\n",
+ dhd_ifname(&dhd->pub, ifidx)));
+ return -EOPNOTSUPP;
+ }
+
+ DHD_INFO(("%s: could not get toe_ol: ret=%d\n", dhd_ifname(&dhd->pub, ifidx), ret));
+ return ret;
+ }
+
+ memcpy(toe_ol, buf, sizeof(uint32));
+ return 0;
+}
+
+/* Set current toe component enables in toe_ol iovar, and set toe global enable iovar */
+static int
+dhd_toe_set(dhd_info_t *dhd, int ifidx, uint32 toe_ol)
+{
+ wl_ioctl_t ioc;
+ char buf[32];
+ int toe, ret;
+
+ memset(&ioc, 0, sizeof(ioc));
+
+ ioc.cmd = WLC_SET_VAR;
+ ioc.buf = buf;
+ ioc.len = (uint)sizeof(buf);
+ ioc.set = TRUE;
+
+ /* Set toe_ol as requested */
+
+ strcpy(buf, "toe_ol");
+ memcpy(&buf[sizeof("toe_ol")], &toe_ol, sizeof(uint32));
+
+ if ((ret = dhd_prot_ioctl(&dhd->pub, ifidx, &ioc, ioc.buf, ioc.len)) < 0) {
+ DHD_ERROR(("%s: could not set toe_ol: ret=%d\n",
+ dhd_ifname(&dhd->pub, ifidx), ret));
+ return ret;
+ }
+
+ /* Enable toe globally only if any components are enabled. */
+
+ toe = (toe_ol != 0);
+
+ strcpy(buf, "toe");
+ memcpy(&buf[sizeof("toe")], &toe, sizeof(uint32));
+
+ if ((ret = dhd_prot_ioctl(&dhd->pub, ifidx, &ioc, ioc.buf, ioc.len)) < 0) {
+ DHD_ERROR(("%s: could not set toe: ret=%d\n", dhd_ifname(&dhd->pub, ifidx), ret));
+ return ret;
+ }
+
+ return 0;
+}
+#endif /* TOE */
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 24)
+static void dhd_ethtool_get_drvinfo(struct net_device *net,
+ struct ethtool_drvinfo *info)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(net);
+
+ sprintf(info->driver, "wl");
+ sprintf(info->version, "%lu", dhd->pub.drv_version);
+}
+
+struct ethtool_ops dhd_ethtool_ops = {
+ .get_drvinfo = dhd_ethtool_get_drvinfo
+};
+#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 24) */
+
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 4, 2)
+static int
+dhd_ethtool(dhd_info_t *dhd, void *uaddr)
+{
+ struct ethtool_drvinfo info;
+ char drvname[sizeof(info.driver)];
+ uint32 cmd;
+#ifdef TOE
+ struct ethtool_value edata;
+ uint32 toe_cmpnt, csum_dir;
+ int ret;
+#endif
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ /* all ethtool calls start with a cmd word */
+ if (copy_from_user(&cmd, uaddr, sizeof (uint32)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case ETHTOOL_GDRVINFO:
+ /* Copy out any request driver name */
+ if (copy_from_user(&info, uaddr, sizeof(info)))
+ return -EFAULT;
+ strncpy(drvname, info.driver, sizeof(info.driver));
+ drvname[sizeof(info.driver)-1] = '\0';
+
+ /* clear struct for return */
+ memset(&info, 0, sizeof(info));
+ info.cmd = cmd;
+
+ /* if dhd requested, identify ourselves */
+ if (strcmp(drvname, "?dhd") == 0) {
+ sprintf(info.driver, "dhd");
+ strcpy(info.version, EPI_VERSION_STR);
+ }
+
+ /* otherwise, require dongle to be up */
+ else if (!dhd->pub.up) {
+ DHD_ERROR(("%s: dongle is not up\n", __FUNCTION__));
+ return -ENODEV;
+ }
+
+ /* finally, report dongle driver type */
+ else if (dhd->pub.iswl)
+ sprintf(info.driver, "wl");
+ else
+ sprintf(info.driver, "xx");
+
+ sprintf(info.version, "%lu", dhd->pub.drv_version);
+ if (copy_to_user(uaddr, &info, sizeof(info)))
+ return -EFAULT;
+ DHD_CTL(("%s: given %*s, returning %s\n", __FUNCTION__,
+ (int)sizeof(drvname), drvname, info.driver));
+ break;
+
+#ifdef TOE
+ /* Get toe offload components from dongle */
+ case ETHTOOL_GRXCSUM:
+ case ETHTOOL_GTXCSUM:
+ if ((ret = dhd_toe_get(dhd, 0, &toe_cmpnt)) < 0)
+ return ret;
+
+ csum_dir = (cmd == ETHTOOL_GTXCSUM) ? TOE_TX_CSUM_OL : TOE_RX_CSUM_OL;
+
+ edata.cmd = cmd;
+ edata.data = (toe_cmpnt & csum_dir) ? 1 : 0;
+
+ if (copy_to_user(uaddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ break;
+
+ /* Set toe offload components in dongle */
+ case ETHTOOL_SRXCSUM:
+ case ETHTOOL_STXCSUM:
+ if (copy_from_user(&edata, uaddr, sizeof(edata)))
+ return -EFAULT;
+
+ /* Read the current settings, update and write back */
+ if ((ret = dhd_toe_get(dhd, 0, &toe_cmpnt)) < 0)
+ return ret;
+
+ csum_dir = (cmd == ETHTOOL_STXCSUM) ? TOE_TX_CSUM_OL : TOE_RX_CSUM_OL;
+
+ if (edata.data != 0)
+ toe_cmpnt |= csum_dir;
+ else
+ toe_cmpnt &= ~csum_dir;
+
+ if ((ret = dhd_toe_set(dhd, 0, toe_cmpnt)) < 0)
+ return ret;
+
+ /* If setting TX checksum mode, tell Linux the new mode */
+ if (cmd == ETHTOOL_STXCSUM) {
+ if (edata.data)
+ dhd->iflist[0]->net->features |= NETIF_F_IP_CSUM;
+ else
+ dhd->iflist[0]->net->features &= ~NETIF_F_IP_CSUM;
+ }
+
+ break;
+#endif /* TOE */
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+#endif /* LINUX_VERSION_CODE > KERNEL_VERSION(2, 4, 2) */
+
+static int
+dhd_ioctl_entry(struct net_device *net, struct ifreq *ifr, int cmd)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(net);
+ dhd_ioctl_t ioc;
+ int bcmerror = 0;
+ int buflen = 0;
+ void *buf = NULL;
+ uint driver = 0;
+ int ifidx;
+ bool is_set_key_cmd;
+ int ret;
+
+ dhd_os_wake_lock(&dhd->pub);
+
+ ifidx = dhd_net2idx(dhd, net);
+ DHD_TRACE(("%s: ifidx %d, cmd 0x%04x\n", __FUNCTION__, ifidx, cmd));
+
+ if (ifidx == DHD_BAD_IF) {
+ dhd_os_wake_unlock(&dhd->pub);
+ return -1;
+ }
+
+#if defined(CONFIG_WIRELESS_EXT)
+ /* linux wireless extensions */
+ if ((cmd >= SIOCIWFIRST) && (cmd <= SIOCIWLAST)) {
+ /* may recurse, do NOT lock */
+ ret = wl_iw_ioctl(net, ifr, cmd);
+ dhd_os_wake_unlock(&dhd->pub);
+ return ret;
+ }
+#endif /* defined(CONFIG_WIRELESS_EXT) */
+
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 4, 2)
+ if (cmd == SIOCETHTOOL) {
+ ret = dhd_ethtool(dhd, (void*)ifr->ifr_data);
+ dhd_os_wake_unlock(&dhd->pub);
+ return ret;
+ }
+#endif /* LINUX_VERSION_CODE > KERNEL_VERSION(2, 4, 2) */
+
+ if (cmd != SIOCDEVPRIVATE) {
+ dhd_os_wake_unlock(&dhd->pub);
+ return -EOPNOTSUPP;
+ }
+
+ memset(&ioc, 0, sizeof(ioc));
+
+ /* Copy the ioc control structure part of ioctl request */
+ if (copy_from_user(&ioc, ifr->ifr_data, sizeof(wl_ioctl_t))) {
+ bcmerror = -BCME_BADADDR;
+ goto done;
+ }
+
+ /* Copy out any buffer passed */
+ if (ioc.buf) {
+ buflen = MIN(ioc.len, DHD_IOCTL_MAXLEN);
+ /* optimization for direct ioctl calls from kernel */
+ /*
+ if (segment_eq(get_fs(), KERNEL_DS)) {
+ buf = ioc.buf;
+ } else {
+ */
+ {
+ if (!(buf = (char*)MALLOC(dhd->pub.osh, buflen))) {
+ bcmerror = -BCME_NOMEM;
+ goto done;
+ }
+ if (copy_from_user(buf, ioc.buf, buflen)) {
+ bcmerror = -BCME_BADADDR;
+ goto done;
+ }
+ }
+ }
+
+ /* To differentiate between wl and dhd read 4 more byes */
+ if ((copy_from_user(&driver, (char *)ifr->ifr_data + sizeof(wl_ioctl_t),
+ sizeof(uint)) != 0)) {
+ bcmerror = -BCME_BADADDR;
+ goto done;
+ }
+
+ if (!capable(CAP_NET_ADMIN)) {
+ bcmerror = -BCME_EPERM;
+ goto done;
+ }
+
+ /* check for local dhd ioctl and handle it */
+ if (driver == DHD_IOCTL_MAGIC) {
+ bcmerror = dhd_ioctl((void *)&dhd->pub, &ioc, buf, buflen);
+ if (bcmerror)
+ dhd->pub.bcmerror = bcmerror;
+ goto done;
+ }
+
+ /* send to dongle (must be up, and wl) */
+ if (dhd->pub.busstate != DHD_BUS_DATA) {
+ DHD_ERROR(("%s DONGLE_DOWN\n", __FUNCTION__));
+ bcmerror = BCME_DONGLE_DOWN;
+ goto done;
+ }
+
+ if (!dhd->pub.iswl) {
+ bcmerror = BCME_DONGLE_DOWN;
+ goto done;
+ }
+
+ /* Intercept WLC_SET_KEY IOCTL - serialize M4 send and set key IOCTL to
+ * prevent M4 encryption.
+ */
+ is_set_key_cmd = ((ioc.cmd == WLC_SET_KEY) ||
+ ((ioc.cmd == WLC_SET_VAR) &&
+ !(strncmp("wsec_key", ioc.buf, 9))) ||
+ ((ioc.cmd == WLC_SET_VAR) &&
+ !(strncmp("bsscfg:wsec_key", ioc.buf, 15))));
+ if (is_set_key_cmd) {
+ dhd_wait_pend8021x(net);
+ }
+
+ bcmerror = dhd_prot_ioctl(&dhd->pub, ifidx, (wl_ioctl_t *)&ioc, buf, buflen);
+
+done:
+ if ((bcmerror == -ETIMEDOUT) || ((dhd->pub.busstate == DHD_BUS_DOWN) &&
+ (!dhd->pub.dongle_reset))) {
+ DHD_ERROR(("%s: Event HANG send up\n", __FUNCTION__));
+ net_os_send_hang_message(net);
+ }
+
+ if (!bcmerror && buf && ioc.buf) {
+ if (copy_to_user(ioc.buf, buf, buflen))
+ bcmerror = -EFAULT;
+ }
+
+ if (buf)
+ MFREE(dhd->pub.osh, buf, buflen);
+
+ dhd_os_wake_unlock(&dhd->pub);
+
+ return OSL_ERROR(bcmerror);
+}
+
+static int
+dhd_stop(struct net_device *net)
+{
+#if !defined(IGNORE_ETH0_DOWN)
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(net);
+
+ DHD_TRACE(("%s: Enter %s\n", __FUNCTION__, net->name));
+ if (dhd->pub.up == 0) {
+ return 0;
+ }
+
+ /* Set state and stop OS transmissions */
+ dhd->pub.up = 0;
+ netif_stop_queue(net);
+#else
+ DHD_ERROR(("BYPASS %s:due to BRCM compilation : under investigation ...\n", __FUNCTION__));
+#endif /* !defined(IGNORE_ETH0_DOWN) */
+
+ OLD_MOD_DEC_USE_COUNT;
+ return 0;
+}
+
+static int
+dhd_open(struct net_device *net)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(net);
+#ifdef TOE
+ uint32 toe_ol;
+#endif
+ int ifidx;
+
+ /* Force start if ifconfig_up gets called before START command */
+ wl_control_wl_start(net);
+
+ ifidx = dhd_net2idx(dhd, net);
+ DHD_TRACE(("%s: ifidx %d\n", __FUNCTION__, ifidx));
+
+ if ((dhd->iflist[ifidx]) && (dhd->iflist[ifidx]->state == WLC_E_IF_DEL)) {
+ DHD_ERROR(("%s: Error: called when IF already deleted\n", __FUNCTION__));
+ return -1;
+ }
+
+ if (ifidx == 0) { /* do it only for primary eth0 */
+
+ atomic_set(&dhd->pend_8021x_cnt, 0);
+
+ memcpy(net->dev_addr, dhd->pub.mac.octet, ETHER_ADDR_LEN);
+
+#ifdef TOE
+ /* Get current TOE mode from dongle */
+ if (dhd_toe_get(dhd, ifidx, &toe_ol) >= 0 && (toe_ol & TOE_TX_CSUM_OL) != 0)
+ dhd->iflist[ifidx]->net->features |= NETIF_F_IP_CSUM;
+ else
+ dhd->iflist[ifidx]->net->features &= ~NETIF_F_IP_CSUM;
+#endif
+ }
+ /* Allow transmit calls */
+ netif_start_queue(net);
+ dhd->pub.up = 1;
+
+ OLD_MOD_INC_USE_COUNT;
+ return 0;
+}
+
+osl_t *
+dhd_osl_attach(void *pdev, uint bustype)
+{
+ return osl_attach(pdev, bustype, TRUE);
+}
+
+void
+dhd_osl_detach(osl_t *osh)
+{
+ if (MALLOCED(osh)) {
+ DHD_ERROR(("%s: MEMORY LEAK %d bytes\n", __FUNCTION__, MALLOCED(osh)));
+ }
+ osl_detach(osh);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && 1
+ up(&dhd_registration_sem);
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) */
+}
+
+int
+dhd_add_if(dhd_info_t *dhd, int ifidx, void *handle, char *name,
+ uint8 *mac_addr, uint32 flags, uint8 bssidx)
+{
+ dhd_if_t *ifp;
+
+ DHD_TRACE(("%s: idx %d, handle->%p\n", __FUNCTION__, ifidx, handle));
+
+ ASSERT(dhd && (ifidx < DHD_MAX_IFS));
+
+ ifp = dhd->iflist[ifidx];
+ if (!ifp && !(ifp = MALLOC(dhd->pub.osh, sizeof(dhd_if_t)))) {
+ DHD_ERROR(("%s: OOM - dhd_if_t\n", __FUNCTION__));
+ return -ENOMEM;
+ }
+
+ memset(ifp, 0, sizeof(dhd_if_t));
+ ifp->info = dhd;
+ dhd->iflist[ifidx] = ifp;
+ strncpy(ifp->name, name, IFNAMSIZ);
+ ifp->name[IFNAMSIZ] = '\0';
+ if (mac_addr != NULL)
+ memcpy(&ifp->mac_addr, mac_addr, ETHER_ADDR_LEN);
+
+ if (handle == NULL) {
+ ifp->state = WLC_E_IF_ADD;
+ ifp->idx = ifidx;
+ ASSERT(dhd->sysioc_pid >= 0);
+ up(&dhd->sysioc_sem);
+ } else
+ ifp->net = (struct net_device *)handle;
+
+ return 0;
+}
+
+void
+dhd_del_if(dhd_info_t *dhd, int ifidx)
+{
+ dhd_if_t *ifp;
+
+ DHD_TRACE(("%s: idx %d\n", __FUNCTION__, ifidx));
+
+ ASSERT(dhd && ifidx && (ifidx < DHD_MAX_IFS));
+ ifp = dhd->iflist[ifidx];
+ if (!ifp) {
+ DHD_ERROR(("%s: Null interface\n", __FUNCTION__));
+ return;
+ }
+
+ ifp->state = WLC_E_IF_DEL;
+ ifp->idx = ifidx;
+ ASSERT(dhd->sysioc_pid >= 0);
+ up(&dhd->sysioc_sem);
+}
+
+dhd_pub_t *
+dhd_attach(osl_t *osh, struct dhd_bus *bus, uint bus_hdrlen)
+{
+ dhd_info_t *dhd = NULL;
+ struct net_device *net;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+ /* updates firmware nvram path if it was provided as module paramters */
+ if ((firmware_path != NULL) && (firmware_path[0] != '\0'))
+ strcpy(fw_path, firmware_path);
+ if ((nvram_path != NULL) && (nvram_path[0] != '\0'))
+ strcpy(nv_path, nvram_path);
+
+ /* Allocate etherdev, including space for private structure */
+ if (!(net = alloc_etherdev(sizeof(dhd)))) {
+ DHD_ERROR(("%s: OOM - alloc_etherdev\n", __FUNCTION__));
+ goto fail;
+ }
+
+ /* Allocate primary dhd_info */
+ if (!(dhd = MALLOC(osh, sizeof(dhd_info_t)))) {
+ DHD_ERROR(("%s: OOM - alloc dhd_info\n", __FUNCTION__));
+ goto fail;
+ }
+
+ memset(dhd, 0, sizeof(dhd_info_t));
+
+ /*
+ * Save the dhd_info into the priv
+ */
+ memcpy(netdev_priv(net), &dhd, sizeof(dhd));
+ dhd->pub.osh = osh;
+
+ /* Set network interface name if it was provided as module parameter */
+ if (iface_name[0]) {
+ int len;
+ char ch;
+ strncpy(net->name, iface_name, IFNAMSIZ);
+ net->name[IFNAMSIZ - 1] = 0;
+ len = strlen(net->name);
+ ch = net->name[len - 1];
+ if ((ch > '9' || ch < '0') && (len < IFNAMSIZ - 2))
+ strcat(net->name, "%d");
+ }
+
+ if (dhd_add_if(dhd, 0, (void *)net, net->name, NULL, 0, 0) == DHD_BAD_IF)
+ goto fail;
+
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 31))
+ net->open = NULL;
+#else
+ net->netdev_ops = NULL;
+#endif
+
+ init_MUTEX(&dhd->proto_sem);
+ /* Initialize other structure content */
+ init_waitqueue_head(&dhd->ioctl_resp_wait);
+ init_waitqueue_head(&dhd->ctrl_wait);
+
+ /* Initialize the spinlocks */
+ spin_lock_init(&dhd->sdlock);
+ spin_lock_init(&dhd->txqlock);
+ spin_lock_init(&dhd->dhd_lock);
+
+ /* Initialize Wakelock stuff */
+ spin_lock_init(&dhd->wl_lock);
+ dhd->wl_count = 0;
+ dhd->wl_packet = 0;
+#ifdef CONFIG_HAS_WAKELOCK
+ wake_lock_init(&dhd->wl_wifi, WAKE_LOCK_SUSPEND, "wlan_wake");
+ wake_lock_init(&dhd->wl_rxwake, WAKE_LOCK_SUSPEND, "wlan_rx_wake");
+#endif
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 25))
+ mutex_init(&dhd->wl_start_lock);
+#endif
+ /* Link to info module */
+ dhd->pub.info = dhd;
+
+ /* Link to bus module */
+ dhd->pub.bus = bus;
+ dhd->pub.hdrlen = bus_hdrlen;
+
+ /* Attach and link in the protocol */
+ if (dhd_prot_attach(&dhd->pub) != 0) {
+ DHD_ERROR(("dhd_prot_attach failed\n"));
+ goto fail;
+ }
+#if defined(CONFIG_WIRELESS_EXT)
+ /* Attach and link in the iw */
+ if (wl_iw_attach(net, (void *)&dhd->pub) != 0) {
+ DHD_ERROR(("wl_iw_attach failed\n"));
+ goto fail;
+ }
+#endif /* defined(CONFIG_WIRELESS_EXT) */
+
+ /* Set up the watchdog timer */
+ init_timer(&dhd->timer);
+ dhd->timer.data = (ulong)dhd;
+ dhd->timer.function = dhd_watchdog;
+
+ /* Initialize thread based operation and lock */
+ init_MUTEX(&dhd->sdsem);
+ if ((dhd_watchdog_prio >= 0) && (dhd_dpc_prio >= 0)) {
+ dhd->threads_only = TRUE;
+ }
+ else {
+ dhd->threads_only = FALSE;
+ }
+
+ if (dhd_dpc_prio >= 0) {
+ /* Initialize watchdog thread */
+ sema_init(&dhd->watchdog_sem, 0);
+ init_completion(&dhd->watchdog_exited);
+ dhd->watchdog_pid = kernel_thread(dhd_watchdog_thread, dhd, 0);
+ } else {
+ dhd->watchdog_pid = -1;
+ }
+
+ /* Set up the bottom half handler */
+ if (dhd_dpc_prio >= 0) {
+ /* Initialize DPC thread */
+ sema_init(&dhd->dpc_sem, 0);
+ init_completion(&dhd->dpc_exited);
+ dhd->dpc_pid = kernel_thread(dhd_dpc_thread, dhd, 0);
+ } else {
+ tasklet_init(&dhd->tasklet, dhd_dpc, (ulong)dhd);
+ dhd->dpc_pid = -1;
+ }
+
+ if (dhd_sysioc) {
+ sema_init(&dhd->sysioc_sem, 0);
+ init_completion(&dhd->sysioc_exited);
+ dhd->sysioc_pid = kernel_thread(_dhd_sysioc_thread, dhd, 0);
+ } else {
+ dhd->sysioc_pid = -1;
+ }
+
+ /*
+ * Save the dhd_info into the priv
+ */
+ memcpy(netdev_priv(net), &dhd, sizeof(dhd));
+
+#if defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC)
+ g_bus = bus;
+#endif
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP)
+ register_pm_notifier(&dhd_sleep_pm_notifier);
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP) */
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ dhd->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 20;
+ dhd->early_suspend.suspend = dhd_early_suspend;
+ dhd->early_suspend.resume = dhd_late_resume;
+ register_early_suspend(&dhd->early_suspend);
+#endif
+
+ return &dhd->pub;
+
+fail:
+ if (net)
+ free_netdev(net);
+ if (dhd)
+ dhd_detach(&dhd->pub);
+
+ return NULL;
+}
+
+
+int
+dhd_bus_start(dhd_pub_t *dhdp)
+{
+ int ret = -1;
+ dhd_info_t *dhd = (dhd_info_t*)dhdp->info;
+#ifdef EMBEDDED_PLATFORM
+ char iovbuf[WL_EVENTING_MASK_LEN + 12]; /* Room for "event_msgs" + '\0' + bitvec */
+#endif /* EMBEDDED_PLATFORM */
+
+ ASSERT(dhd);
+
+ DHD_TRACE(("%s: \n", __FUNCTION__));
+
+ /* try to download image and nvram to the dongle */
+ if (dhd->pub.busstate == DHD_BUS_DOWN) {
+ if (!(dhd_bus_download_firmware(dhd->pub.bus, dhd->pub.osh,
+ fw_path, nv_path))) {
+ DHD_ERROR(("%s: dhdsdio_probe_download failed. firmware = %s nvram = %s\n",
+ __FUNCTION__, fw_path, nv_path));
+ return -1;
+ }
+ }
+
+ /* Start the watchdog timer */
+ dhd->pub.tickcnt = 0;
+ dhd_os_wd_timer(&dhd->pub, dhd_watchdog_ms);
+
+ /* Bring up the bus */
+ if ((ret = dhd_bus_init(&dhd->pub, TRUE)) != 0) {
+ DHD_ERROR(("%s, dhd_bus_init failed %d\n", __FUNCTION__, ret));
+ return ret;
+ }
+#if defined(OOB_INTR_ONLY)
+ /* Host registration for OOB interrupt */
+ if (bcmsdh_register_oob_intr(dhdp)) {
+ dhd->wd_timer_valid = FALSE;
+ del_timer_sync(&dhd->timer);
+ DHD_ERROR(("%s Host failed to resgister for OOB\n", __FUNCTION__));
+ return -ENODEV;
+ }
+
+ /* Enable oob at firmware */
+ dhd_enable_oob_intr(dhd->pub.bus, TRUE);
+#endif /* defined(OOB_INTR_ONLY) */
+
+ /* If bus is not ready, can't come up */
+ if (dhd->pub.busstate != DHD_BUS_DATA) {
+ dhd->wd_timer_valid = FALSE;
+ del_timer_sync(&dhd->timer);
+ DHD_ERROR(("%s failed bus is not ready\n", __FUNCTION__));
+ return -ENODEV;
+ }
+
+#ifdef EMBEDDED_PLATFORM
+ bcm_mkiovar("event_msgs", dhdp->eventmask, WL_EVENTING_MASK_LEN, iovbuf, sizeof(iovbuf));
+ dhdcdc_query_ioctl(dhdp, 0, WLC_GET_VAR, iovbuf, sizeof(iovbuf));
+ bcopy(iovbuf, dhdp->eventmask, WL_EVENTING_MASK_LEN);
+
+ setbit(dhdp->eventmask, WLC_E_SET_SSID);
+ setbit(dhdp->eventmask, WLC_E_PRUNE);
+ setbit(dhdp->eventmask, WLC_E_AUTH);
+ setbit(dhdp->eventmask, WLC_E_REASSOC);
+ setbit(dhdp->eventmask, WLC_E_REASSOC_IND);
+ setbit(dhdp->eventmask, WLC_E_DEAUTH_IND);
+ setbit(dhdp->eventmask, WLC_E_DISASSOC_IND);
+ setbit(dhdp->eventmask, WLC_E_DISASSOC);
+ setbit(dhdp->eventmask, WLC_E_JOIN);
+ setbit(dhdp->eventmask, WLC_E_ASSOC_IND);
+ setbit(dhdp->eventmask, WLC_E_PSK_SUP);
+ setbit(dhdp->eventmask, WLC_E_LINK);
+ setbit(dhdp->eventmask, WLC_E_NDIS_LINK);
+ setbit(dhdp->eventmask, WLC_E_MIC_ERROR);
+ setbit(dhdp->eventmask, WLC_E_PMKID_CACHE);
+ setbit(dhdp->eventmask, WLC_E_TXFAIL);
+ setbit(dhdp->eventmask, WLC_E_JOIN_START);
+ setbit(dhdp->eventmask, WLC_E_SCAN_COMPLETE);
+ setbit(dhdp->eventmask, WLC_E_RELOAD);
+#ifdef PNO_SUPPORT
+ setbit(dhdp->eventmask, WLC_E_PFN_NET_FOUND);
+#endif /* PNO_SUPPORT */
+
+/* enable dongle roaming event */
+ setbit(dhdp->eventmask, WLC_E_ROAM);
+
+ dhdp->pktfilter_count = 1;
+ /* Setup filter to allow only unicast */
+ dhdp->pktfilter[0] = "100 0 0 0 0x01 0x00";
+#endif /* EMBEDDED_PLATFORM */
+
+ /* Bus is ready, do any protocol initialization */
+ if ((ret = dhd_prot_init(&dhd->pub)) < 0)
+ return ret;
+
+ return 0;
+}
+
+int
+dhd_iovar(dhd_pub_t *pub, int ifidx, char *name, char *cmd_buf, uint cmd_len, int set)
+{
+ char buf[strlen(name) + 1 + cmd_len];
+ int len = sizeof(buf);
+ wl_ioctl_t ioc;
+ int ret;
+
+ len = bcm_mkiovar(name, cmd_buf, cmd_len, buf, len);
+
+ memset(&ioc, 0, sizeof(ioc));
+
+ ioc.cmd = set? WLC_SET_VAR : WLC_GET_VAR;
+ ioc.buf = buf;
+ ioc.len = len;
+ ioc.set = set;
+
+ ret = dhd_prot_ioctl(pub, ifidx, &ioc, ioc.buf, ioc.len);
+ if (!set && ret >= 0)
+ memcpy(cmd_buf, buf, cmd_len);
+
+ return ret;
+}
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
+static struct net_device_ops dhd_ops_pri = {
+ .ndo_open = dhd_open,
+ .ndo_stop = dhd_stop,
+ .ndo_get_stats = dhd_get_stats,
+ .ndo_do_ioctl = dhd_ioctl_entry,
+ .ndo_start_xmit = dhd_start_xmit,
+ .ndo_set_mac_address = dhd_set_mac_address,
+ .ndo_set_multicast_list = dhd_set_multicast_list,
+};
+
+static struct net_device_ops dhd_ops_virt = {
+ .ndo_get_stats = dhd_get_stats,
+ .ndo_do_ioctl = dhd_ioctl_entry,
+ .ndo_start_xmit = dhd_start_xmit,
+ .ndo_set_mac_address = dhd_set_mac_address,
+ .ndo_set_multicast_list = dhd_set_multicast_list,
+};
+#endif
+
+int
+dhd_net_attach(dhd_pub_t *dhdp, int ifidx)
+{
+ dhd_info_t *dhd = (dhd_info_t *)dhdp->info;
+ struct net_device *net;
+ uint8 temp_addr[ETHER_ADDR_LEN] = { 0x00, 0x90, 0x4c, 0x11, 0x22, 0x33 };
+
+ DHD_TRACE(("%s: ifidx %d\n", __FUNCTION__, ifidx));
+
+ ASSERT(dhd && dhd->iflist[ifidx]);
+ net = dhd->iflist[ifidx]->net;
+
+ ASSERT(net);
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 31))
+ ASSERT(!net->open);
+ net->get_stats = dhd_get_stats;
+ net->do_ioctl = dhd_ioctl_entry;
+ net->hard_start_xmit = dhd_start_xmit;
+ net->set_mac_address = dhd_set_mac_address;
+ net->set_multicast_list = dhd_set_multicast_list;
+ net->open = net->stop = NULL;
+#else
+ ASSERT(!net->netdev_ops);
+ net->netdev_ops = &dhd_ops_virt;
+#endif
+
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 31))
+ net->open = dhd_open;
+ net->stop = dhd_stop;
+#else
+ net->netdev_ops = &dhd_ops_pri;
+#endif
+
+ /*
+ * We have to use the primary MAC for virtual interfaces
+ */
+ if (ifidx != 0) {
+ /* for virtual interfaces use the primary MAC */
+ memcpy(temp_addr, dhd->pub.mac.octet, ETHER_ADDR_LEN);
+ }
+
+ if (ifidx == 1) {
+ DHD_TRACE(("%s ACCESS POINT MAC: \n", __FUNCTION__));
+ /* ACCESSPOINT INTERFACE CASE */
+ temp_addr[0] |= 0x02; /* set bit 2 , - Locally Administered address */
+ }
+ net->hard_header_len = ETH_HLEN + dhd->pub.hdrlen;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 24)
+ net->ethtool_ops = &dhd_ethtool_ops;
+#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 24) */
+
+#if defined(CONFIG_WIRELESS_EXT)
+#if WIRELESS_EXT < 19
+ net->get_wireless_stats = dhd_get_wireless_stats;
+#endif /* WIRELESS_EXT < 19 */
+#if WIRELESS_EXT > 12
+ net->wireless_handlers = (struct iw_handler_def *)&wl_iw_handler_def;
+#endif /* WIRELESS_EXT > 12 */
+#endif /* defined(CONFIG_WIRELESS_EXT) */
+
+ dhd->pub.rxsz = net->mtu + net->hard_header_len + dhd->pub.hdrlen;
+
+ memcpy(net->dev_addr, temp_addr, ETHER_ADDR_LEN);
+
+ if (register_netdev(net) != 0) {
+ DHD_ERROR(("%s: couldn't register the net device\n", __FUNCTION__));
+ goto fail;
+ }
+
+ printf("%s: Broadcom Dongle Host Driver mac=%.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", net->name,
+ dhd->pub.mac.octet[0], dhd->pub.mac.octet[1], dhd->pub.mac.octet[2],
+ dhd->pub.mac.octet[3], dhd->pub.mac.octet[4], dhd->pub.mac.octet[5]);
+
+#if defined(CONFIG_WIRELESS_EXT)
+#if defined(CONFIG_FIRST_SCAN)
+#ifdef SOFTAP
+ if (ifidx == 0)
+ /* Don't call for SOFTAP Interface in SOFTAP MODE */
+ wl_iw_iscan_set_scan_broadcast_prep(net, 1);
+#else
+ wl_iw_iscan_set_scan_broadcast_prep(net, 1);
+#endif /* SOFTAP */
+#endif /* CONFIG_FIRST_SCAN */
+#endif /* CONFIG_WIRELESS_EXT */
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ up(&dhd_registration_sem);
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) */
+ return 0;
+
+fail:
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 31))
+ net->open = NULL;
+#else
+ net->netdev_ops = NULL;
+#endif
+ return BCME_ERROR;
+}
+
+void
+dhd_bus_detach(dhd_pub_t *dhdp)
+{
+ dhd_info_t *dhd;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (dhdp) {
+ dhd = (dhd_info_t *)dhdp->info;
+ if (dhd) {
+ /* Stop the protocol module */
+ dhd_prot_stop(&dhd->pub);
+
+ /* Stop the bus module */
+ dhd_bus_stop(dhd->pub.bus, TRUE);
+#if defined(OOB_INTR_ONLY)
+ bcmsdh_unregister_oob_intr();
+#endif /* defined(OOB_INTR_ONLY) */
+
+ /* Clear the watchdog timer */
+ dhd->wd_timer_valid = FALSE;
+ del_timer_sync(&dhd->timer);
+ }
+ }
+}
+
+void
+dhd_detach(dhd_pub_t *dhdp)
+{
+ dhd_info_t *dhd;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (dhdp) {
+ dhd = (dhd_info_t *)dhdp->info;
+ if (dhd) {
+ dhd_if_t *ifp;
+ int i;
+
+#if defined(CONFIG_HAS_EARLYSUSPEND)
+ if (dhd->early_suspend.suspend)
+ unregister_early_suspend(&dhd->early_suspend);
+#endif /* defined(CONFIG_HAS_EARLYSUSPEND) */
+#if defined(CONFIG_WIRELESS_EXT)
+ /* Attach and link in the iw */
+ wl_iw_detach();
+#endif
+ if (dhd->sysioc_pid >= 0) {
+ KILL_PROC(dhd->sysioc_pid, SIGTERM);
+ wait_for_completion(&dhd->sysioc_exited);
+ }
+
+ for (i = 1; i < DHD_MAX_IFS; i++)
+ if (dhd->iflist[i]) {
+ dhd->iflist[i]->state = WLC_E_IF_DEL;
+ dhd->iflist[i]->idx = i;
+ dhd_op_if(dhd->iflist[i]);
+ }
+
+ ifp = dhd->iflist[0];
+ ASSERT(ifp);
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 31))
+ if (ifp->net->open) {
+#else
+ if (ifp->net->netdev_ops == &dhd_ops_pri) {
+#endif
+ dhd_stop(ifp->net);
+ unregister_netdev(ifp->net);
+ }
+
+ if (dhd->watchdog_pid >= 0)
+ {
+ KILL_PROC(dhd->watchdog_pid, SIGTERM);
+ wait_for_completion(&dhd->watchdog_exited);
+ }
+
+ if (dhd->dpc_pid >= 0)
+ {
+ KILL_PROC(dhd->dpc_pid, SIGTERM);
+ wait_for_completion(&dhd->dpc_exited);
+ }
+ else
+ tasklet_kill(&dhd->tasklet);
+
+ dhd_bus_detach(dhdp);
+
+ if (dhdp->prot)
+ dhd_prot_detach(dhdp);
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP)
+ unregister_pm_notifier(&dhd_sleep_pm_notifier);
+#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)) && defined(CONFIG_PM_SLEEP) */
+ free_netdev(ifp->net);
+#ifdef CONFIG_HAS_WAKELOCK
+ wake_lock_destroy(&dhd->wl_wifi);
+ wake_lock_destroy(&dhd->wl_rxwake);
+#endif
+ MFREE(dhd->pub.osh, ifp, sizeof(*ifp));
+ MFREE(dhd->pub.osh, dhd, sizeof(*dhd));
+ }
+ }
+}
+
+static void __exit
+dhd_module_cleanup(void)
+{
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ dhd_bus_unregister();
+#if defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC)
+ wifi_del_dev();
+#endif
+ /* Call customer gpio to turn off power with WL_REG_ON signal */
+ dhd_customer_gpio_wlan_ctrl(WLAN_POWER_OFF);
+}
+
+static int __init
+dhd_module_init(void)
+{
+ int error;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ /* Sanity check on the module parameters */
+ do {
+ /* Both watchdog and DPC as tasklets are ok */
+ if ((dhd_watchdog_prio < 0) && (dhd_dpc_prio < 0))
+ break;
+
+ /* If both watchdog and DPC are threads, TX must be deferred */
+ if ((dhd_watchdog_prio >= 0) && (dhd_dpc_prio >= 0) && dhd_deferred_tx)
+ break;
+
+ DHD_ERROR(("Invalid module parameters.\n"));
+ return -EINVAL;
+ } while (0);
+
+ /* Call customer gpio to turn on power with WL_REG_ON signal */
+ dhd_customer_gpio_wlan_ctrl(WLAN_POWER_ON);
+
+#if defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC)
+ sema_init(&wifi_control_sem, 0);
+
+ error = wifi_add_dev();
+ if (error) {
+ DHD_ERROR(("%s: platform_driver_register failed\n", __FUNCTION__));
+ goto fail_0;
+ }
+
+ /* Waiting callback after platform_driver_register is done or exit with error */
+ if (down_timeout(&wifi_control_sem, msecs_to_jiffies(5000)) != 0) {
+ error = -EINVAL;
+ DHD_ERROR(("%s: platform_driver_register timeout\n", __FUNCTION__));
+ goto fail_1;
+ }
+#endif /* #if defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC) */
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ sema_init(&dhd_registration_sem, 0);
+#endif
+
+ error = dhd_bus_register();
+
+ if (!error)
+ printf("\n%s\n", dhd_version);
+ else {
+ DHD_ERROR(("%s: sdio_register_driver failed\n", __FUNCTION__));
+ goto fail_1;
+ }
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ /*
+ * Wait till MMC sdio_register_driver callback called and made driver attach.
+ * It's needed to make sync up exit from dhd insmod and
+ * Kernel MMC sdio device callback registration
+ */
+ if (down_timeout(&dhd_registration_sem, msecs_to_jiffies(DHD_REGISTRATION_TIMEOUT)) != 0) {
+ error = -EINVAL;
+ DHD_ERROR(("%s: sdio_register_driver timeout\n", __FUNCTION__));
+ goto fail_2;
+ }
+#endif
+ return error;
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+fail_2:
+ dhd_bus_unregister();
+#endif
+fail_1:
+#if defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC)
+ wifi_del_dev();
+fail_0:
+#endif /* defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC) */
+
+ /* Call customer gpio to turn off power with WL_REG_ON signal */
+ dhd_customer_gpio_wlan_ctrl(WLAN_POWER_OFF);
+
+ return error;
+}
+
+module_init(dhd_module_init);
+module_exit(dhd_module_cleanup);
+
+/*
+ * OS specific functions required to implement DHD driver in OS independent way
+ */
+int
+dhd_os_proto_block(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+
+ if (dhd) {
+ down(&dhd->proto_sem);
+ return 1;
+ }
+
+ return 0;
+}
+
+int
+dhd_os_proto_unblock(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+
+ if (dhd) {
+ up(&dhd->proto_sem);
+ return 1;
+ }
+
+ return 0;
+}
+
+unsigned int
+dhd_os_get_ioctl_resp_timeout(void)
+{
+ return ((unsigned int)dhd_ioctl_timeout_msec);
+}
+
+void
+dhd_os_set_ioctl_resp_timeout(unsigned int timeout_msec)
+{
+ dhd_ioctl_timeout_msec = (int)timeout_msec;
+}
+
+int
+dhd_os_ioctl_resp_wait(dhd_pub_t *pub, uint *condition, bool *pending)
+{
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+ DECLARE_WAITQUEUE(wait, current);
+ int timeout = dhd_ioctl_timeout_msec;
+
+ /* Convert timeout in millsecond to jiffies */
+ /* timeout = timeout * HZ / 1000; */
+ timeout = msecs_to_jiffies(timeout);
+
+ /* Wait until control frame is available */
+ add_wait_queue(&dhd->ioctl_resp_wait, &wait);
+ set_current_state(TASK_INTERRUPTIBLE);
+ smp_mb();
+ while (!(*condition) && (!signal_pending(current) && timeout)) {
+ timeout = schedule_timeout(timeout);
+ smp_mb();
+ }
+
+ if (signal_pending(current))
+ *pending = TRUE;
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&dhd->ioctl_resp_wait, &wait);
+
+ return timeout;
+}
+
+int
+dhd_os_ioctl_resp_wake(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+
+ if (waitqueue_active(&dhd->ioctl_resp_wait)) {
+ wake_up_interruptible(&dhd->ioctl_resp_wait);
+ }
+
+ return 0;
+}
+
+void
+dhd_os_wd_timer(void *bus, uint wdtick)
+{
+ dhd_pub_t *pub = bus;
+ dhd_info_t *dhd = (dhd_info_t *)pub->info;
+ unsigned long flags;
+ int del_timer_flag = FALSE;
+
+ flags = dhd_os_spin_lock(pub);
+
+ /* don't start the wd until fw is loaded */
+ if (pub->busstate != DHD_BUS_DOWN) {
+ if (wdtick) {
+ dhd_watchdog_ms = (uint)wdtick;
+ dhd->wd_timer_valid = TRUE;
+ /* Re arm the timer, at last watchdog period */
+ mod_timer(&dhd->timer, jiffies + dhd_watchdog_ms * HZ / 1000);
+ } else if (dhd->wd_timer_valid == TRUE) {
+ /* Totally stop the timer */
+ dhd->wd_timer_valid = FALSE;
+ del_timer_flag = TRUE;
+ }
+ }
+ dhd_os_spin_unlock(pub, flags);
+ if (del_timer_flag) {
+ del_timer_sync(&dhd->timer);
+ }
+}
+
+void *
+dhd_os_open_image(char *filename)
+{
+ struct file *fp;
+
+ fp = filp_open(filename, O_RDONLY, 0);
+ /*
+ * 2.6.11 (FC4) supports filp_open() but later revs don't?
+ * Alternative:
+ * fp = open_namei(AT_FDCWD, filename, O_RD, 0);
+ * ???
+ */
+ if (IS_ERR(fp))
+ fp = NULL;
+
+ return fp;
+}
+
+int
+dhd_os_get_image_block(char *buf, int len, void *image)
+{
+ struct file *fp = (struct file *)image;
+ int rdlen;
+
+ if (!image)
+ return 0;
+
+ rdlen = kernel_read(fp, fp->f_pos, buf, len);
+ if (rdlen > 0)
+ fp->f_pos += rdlen;
+
+ return rdlen;
+}
+
+void
+dhd_os_close_image(void *image)
+{
+ if (image)
+ filp_close((struct file *)image, NULL);
+}
+
+
+void
+dhd_os_sdlock(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd;
+
+ dhd = (dhd_info_t *)(pub->info);
+
+ if (dhd->threads_only)
+ down(&dhd->sdsem);
+ else
+ spin_lock_bh(&dhd->sdlock);
+}
+
+void
+dhd_os_sdunlock(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd;
+
+ dhd = (dhd_info_t *)(pub->info);
+
+ if (dhd->threads_only)
+ up(&dhd->sdsem);
+ else
+ spin_unlock_bh(&dhd->sdlock);
+}
+
+void
+dhd_os_sdlock_txq(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd;
+
+ dhd = (dhd_info_t *)(pub->info);
+ spin_lock_bh(&dhd->txqlock);
+}
+
+void
+dhd_os_sdunlock_txq(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd;
+
+ dhd = (dhd_info_t *)(pub->info);
+ spin_unlock_bh(&dhd->txqlock);
+}
+void
+dhd_os_sdlock_rxq(dhd_pub_t *pub)
+{
+}
+void
+dhd_os_sdunlock_rxq(dhd_pub_t *pub)
+{
+}
+
+void
+dhd_os_sdtxlock(dhd_pub_t *pub)
+{
+ dhd_os_sdlock(pub);
+}
+
+void
+dhd_os_sdtxunlock(dhd_pub_t *pub)
+{
+ dhd_os_sdunlock(pub);
+}
+
+#ifdef DHD_USE_STATIC_BUF
+void * dhd_os_prealloc(int section, unsigned long size)
+{
+#if defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC)
+ void *alloc_ptr = NULL;
+ if (wifi_control_data && wifi_control_data->mem_prealloc)
+ {
+ alloc_ptr = wifi_control_data->mem_prealloc(section, size);
+ if (alloc_ptr)
+ {
+ DHD_INFO(("success alloc section %d\n", section));
+ bzero(alloc_ptr, size);
+ return alloc_ptr;
+ }
+ }
+
+ DHD_ERROR(("can't alloc section %d\n", section));
+ return 0;
+#else
+return MALLOC(0, size);
+#endif /* #if defined(CUSTOMER_HW2) && defined(CONFIG_WIFI_CONTROL_FUNC) */
+}
+#endif /* DHD_USE_STATIC_BUF */
+#if defined(CONFIG_WIRELESS_EXT)
+struct iw_statistics *
+dhd_get_wireless_stats(struct net_device *dev)
+{
+ int res = 0;
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ res = wl_iw_get_wireless_stats(dev, &dhd->iw.wstats);
+
+ if (res == 0)
+ return &dhd->iw.wstats;
+ else
+ return NULL;
+}
+#endif /* defined(CONFIG_WIRELESS_EXT) */
+
+static int
+dhd_wl_host_event(dhd_info_t *dhd, int *ifidx, void *pktdata,
+ wl_event_msg_t *event, void **data)
+{
+ int bcmerror = 0;
+
+ ASSERT(dhd != NULL);
+
+ bcmerror = wl_host_event(dhd, ifidx, pktdata, event, data);
+ if (bcmerror != BCME_OK)
+ return (bcmerror);
+
+#if defined(CONFIG_WIRELESS_EXT)
+ ASSERT(dhd->iflist[*ifidx] != NULL);
+
+ if (ntoh32(event->event_type) == WLC_E_IF) {
+ DHD_INFO(("<0> interface:%d OP:%d don't pass to wext,"
+ "net_device might not be created yet\n",
+ *ifidx, ntoh32(event->event_type)));
+ return bcmerror;
+ }
+
+ ASSERT(dhd->iflist[*ifidx]->net != NULL);
+
+ if (dhd->iflist[*ifidx]->net)
+ wl_iw_event(dhd->iflist[*ifidx]->net, event, *data);
+#endif /* defined(CONFIG_WIRELESS_EXT) */
+
+ return (bcmerror);
+}
+
+/* send up locally generated event */
+void
+dhd_sendup_event(dhd_pub_t *dhdp, wl_event_msg_t *event, void *data)
+{
+ switch (ntoh32(event->event_type)) {
+ default:
+ break;
+ }
+}
+
+void dhd_wait_for_event(dhd_pub_t *dhd, bool *lockvar)
+{
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0))
+ struct dhd_info *dhdinfo = dhd->info;
+ dhd_os_sdunlock(dhd);
+ wait_event_interruptible_timeout(dhdinfo->ctrl_wait, (*lockvar == FALSE), HZ * 2);
+ dhd_os_sdlock(dhd);
+#endif
+ return;
+}
+
+void dhd_wait_event_wakeup(dhd_pub_t *dhd)
+{
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0))
+ struct dhd_info *dhdinfo = dhd->info;
+ if (waitqueue_active(&dhdinfo->ctrl_wait))
+ wake_up_interruptible(&dhdinfo->ctrl_wait);
+#endif
+ return;
+}
+
+int
+dhd_dev_reset(struct net_device *dev, uint8 flag)
+{
+ int ret;
+
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ ret = dhd_bus_devreset(&dhd->pub, flag);
+ if (ret) {
+ DHD_ERROR(("%s: dhd_bus_devreset: %d\n", __FUNCTION__, ret));
+ return ret;
+ }
+ DHD_ERROR(("%s: WLAN %s DONE\n", __FUNCTION__, flag ? "OFF" : "ON"));
+
+ return ret;
+}
+
+int net_os_set_suspend_disable(struct net_device *dev, int val)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+ int ret = 0;
+
+ if (dhd) {
+ ret = dhd->pub.suspend_disable_flag;
+ dhd->pub.suspend_disable_flag = val;
+ }
+ return ret;
+}
+
+int net_os_set_suspend(struct net_device *dev, int val)
+{
+ int ret = 0;
+#if defined(CONFIG_HAS_EARLYSUSPEND)
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ if (dhd) {
+ dhd_os_proto_block(&dhd->pub);
+ ret = dhd_set_suspend(val, &dhd->pub);
+ dhd_os_proto_unblock(&dhd->pub);
+ }
+#endif /* defined(CONFIG_HAS_EARLYSUSPEND) */
+ return ret;
+}
+
+int net_os_set_dtim_skip(struct net_device *dev, int val)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ if (dhd)
+ dhd->pub.dtim_skip = val;
+
+ return 0;
+}
+
+int net_os_set_packet_filter(struct net_device *dev, int val)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+ int ret = 0;
+
+ /* Packet filtering is set only if we still in early-suspend and
+ * we need either to turn it ON or turn it OFF
+ * We can always turn it OFF in case of early-suspend, but we turn it
+ * back ON only if suspend_disable_flag was not set
+ */
+ if (dhd && dhd->pub.up) {
+ dhd_os_proto_block(&dhd->pub);
+ if (dhd->pub.in_suspend) {
+ if (!val || (val && !dhd->pub.suspend_disable_flag))
+ dhd_set_packet_filter(val, &dhd->pub);
+ }
+ dhd_os_proto_unblock(&dhd->pub);
+ }
+ return ret;
+}
+
+
+void
+dhd_dev_init_ioctl(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ dhd_preinit_ioctls(&dhd->pub);
+}
+
+#ifdef PNO_SUPPORT
+/* Linux wrapper to call common dhd_pno_clean */
+int
+dhd_dev_pno_reset(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ return (dhd_pno_clean(&dhd->pub));
+}
+
+
+/* Linux wrapper to call common dhd_pno_enable */
+int
+dhd_dev_pno_enable(struct net_device *dev, int pfn_enabled)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ return (dhd_pno_enable(&dhd->pub, pfn_enabled));
+}
+
+
+/* Linux wrapper to call common dhd_pno_set */
+int
+dhd_dev_pno_set(struct net_device *dev, wlc_ssid_t* ssids_local, int nssid, ushort scan_fr)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ return (dhd_pno_set(&dhd->pub, ssids_local, nssid, scan_fr));
+}
+
+/* Linux wrapper to get pno status */
+int
+dhd_dev_get_pno_status(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ return (dhd_pno_get_status(&dhd->pub));
+}
+
+#endif /* PNO_SUPPORT */
+
+int net_os_send_hang_message(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+ int ret = 0;
+
+ if (dhd) {
+ if (!dhd->hang_was_sent) {
+ dhd->hang_was_sent = 1;
+ ret = wl_iw_send_priv_event(dev, "HANG");
+ }
+ }
+ return ret;
+}
+
+void dhd_bus_country_set(struct net_device *dev, char *country_code)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ if (dhd && dhd->pub.up)
+ strncpy(dhd->pub.country_code, country_code, WLC_CNTRY_BUF_SZ);
+}
+
+char *dhd_bus_country_get(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+
+ if (dhd && (dhd->pub.country_code[0] != 0))
+ return dhd->pub.country_code;
+ return NULL;
+}
+
+void dhd_os_start_lock(dhd_pub_t *pub)
+{
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 25))
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+
+ if (dhd)
+ mutex_lock(&dhd->wl_start_lock);
+#endif
+}
+
+void dhd_os_start_unlock(dhd_pub_t *pub)
+{
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 25))
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+
+ if (dhd)
+ mutex_unlock(&dhd->wl_start_lock);
+#endif
+}
+
+static int
+dhd_get_pend_8021x_cnt(dhd_info_t *dhd)
+{
+ return (atomic_read(&dhd->pend_8021x_cnt));
+}
+
+#define MAX_WAIT_FOR_8021X_TX 10
+
+int
+dhd_wait_pend8021x(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+ int timeout = 10 * HZ / 1000;
+ int ntimes = MAX_WAIT_FOR_8021X_TX;
+ int pend = dhd_get_pend_8021x_cnt(dhd);
+
+ while (ntimes && pend) {
+ if (pend) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(timeout);
+ set_current_state(TASK_RUNNING);
+ ntimes--;
+ }
+ pend = dhd_get_pend_8021x_cnt(dhd);
+ }
+ return pend;
+}
+
+#ifdef DHD_DEBUG
+int
+write_to_file(dhd_pub_t *dhd, uint8 *buf, int size)
+{
+ int ret = 0;
+ struct file *fp;
+ mm_segment_t old_fs;
+ loff_t pos = 0;
+
+ /* change to KERNEL_DS address limit */
+ old_fs = get_fs();
+ set_fs(KERNEL_DS);
+
+ /* open file to write */
+ fp = filp_open("/tmp/mem_dump", O_WRONLY|O_CREAT, 0640);
+ if (!fp) {
+ printf("%s: open file error\n", __FUNCTION__);
+ ret = -1;
+ goto exit;
+ }
+
+ /* Write buf to file */
+ fp->f_op->write(fp, buf, size, &pos);
+
+exit:
+ /* free buf before return */
+ MFREE(dhd->osh, buf, size);
+ /* close file before return */
+ if (fp)
+ filp_close(fp, current->files);
+ /* restore previous address limit */
+ set_fs(old_fs);
+
+ return ret;
+}
+#endif /* DHD_DEBUG */
+
+int dhd_os_wake_lock_timeout(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+ unsigned long flags;
+ int ret = 0;
+
+ if (dhd) {
+ spin_lock_irqsave(&dhd->wl_lock, flags);
+ ret = dhd->wl_packet;
+#ifdef CONFIG_HAS_WAKELOCK
+ if (dhd->wl_packet)
+ wake_lock_timeout(&dhd->wl_rxwake, HZ);
+#endif
+ dhd->wl_packet = 0;
+ spin_unlock_irqrestore(&dhd->wl_lock, flags);
+ }
+ /* printk("%s: %d\n", __FUNCTION__, ret); */
+ return ret;
+}
+
+int net_os_wake_lock_timeout(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+ int ret = 0;
+
+ if (dhd)
+ ret = dhd_os_wake_lock_timeout(&dhd->pub);
+ return ret;
+}
+
+int dhd_os_wake_lock_timeout_enable(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+ unsigned long flags;
+
+ if (dhd) {
+ spin_lock_irqsave(&dhd->wl_lock, flags);
+ dhd->wl_packet = 1;
+ spin_unlock_irqrestore(&dhd->wl_lock, flags);
+ }
+ /* printk("%s\n",__func__); */
+ return 0;
+}
+
+int net_os_wake_lock_timeout_enable(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+ int ret = 0;
+
+ if (dhd)
+ ret = dhd_os_wake_lock_timeout_enable(&dhd->pub);
+ return ret;
+}
+
+int dhd_os_wake_lock(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+ unsigned long flags;
+ int ret = 0;
+
+ if (dhd) {
+ spin_lock_irqsave(&dhd->wl_lock, flags);
+#ifdef CONFIG_HAS_WAKELOCK
+ if (!dhd->wl_count)
+ wake_lock(&dhd->wl_wifi);
+#endif
+ dhd->wl_count++;
+ ret = dhd->wl_count;
+ spin_unlock_irqrestore(&dhd->wl_lock, flags);
+ }
+ /* printk("%s: %d\n", __FUNCTION__, ret); */
+ return ret;
+}
+
+int net_os_wake_lock(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+ int ret = 0;
+
+ if (dhd)
+ ret = dhd_os_wake_lock(&dhd->pub);
+ return ret;
+}
+
+int dhd_os_wake_unlock(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+ unsigned long flags;
+ int ret = 0;
+
+ dhd_os_wake_lock_timeout(pub);
+ if (dhd) {
+ spin_lock_irqsave(&dhd->wl_lock, flags);
+ if (dhd->wl_count) {
+ dhd->wl_count--;
+#ifdef CONFIG_HAS_WAKELOCK
+ if (!dhd->wl_count)
+ wake_unlock(&dhd->wl_wifi);
+#endif
+ ret = dhd->wl_count;
+ }
+ spin_unlock_irqrestore(&dhd->wl_lock, flags);
+ }
+ /* printk("%s: %d\n", __FUNCTION__, ret); */
+ return ret;
+}
+
+int net_os_wake_unlock(struct net_device *dev)
+{
+ dhd_info_t *dhd = *(dhd_info_t **)netdev_priv(dev);
+ int ret = 0;
+
+ if (dhd)
+ ret = dhd_os_wake_unlock(&dhd->pub);
+ return ret;
+}
+
+unsigned long dhd_os_spin_lock(dhd_pub_t *pub)
+{
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+ unsigned long flags = 0;
+
+ if (dhd)
+ spin_lock_irqsave(&dhd->dhd_lock, flags);
+
+ return flags;
+}
+
+void dhd_os_spin_unlock(dhd_pub_t *pub, unsigned long flags)
+{
+ dhd_info_t *dhd = (dhd_info_t *)(pub->info);
+
+ if (dhd)
+ spin_unlock_irqrestore(&dhd->dhd_lock, flags);
+}
diff --git a/drivers/net/wireless/bcm4329/dhd_linux_sched.c b/drivers/net/wireless/bcm4329/dhd_linux_sched.c
new file mode 100644
index 0000000..480b416
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dhd_linux_sched.c
@@ -0,0 +1,38 @@
+/*
+ * Expose some of the kernel scheduler routines
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhd_linux_sched.c,v 1.1.34.1.6.1 2009/01/16 01:17:40 Exp $
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linuxver.h>
+
+int setScheduler(struct task_struct *p, int policy, struct sched_param *param)
+{
+ int rc = 0;
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0))
+ rc = sched_setscheduler(p, policy, param);
+#endif /* LinuxVer */
+ return rc;
+}
diff --git a/drivers/net/wireless/bcm4329/dhd_proto.h b/drivers/net/wireless/bcm4329/dhd_proto.h
new file mode 100644
index 0000000..7ef6929
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dhd_proto.h
@@ -0,0 +1,102 @@
+/*
+ * Header file describing the internal (inter-module) DHD interfaces.
+ *
+ * Provides type definitions and function prototypes used to link the
+ * DHD OS, bus, and protocol modules.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhd_proto.h,v 1.2.82.1.4.1.16.7 2010/05/10 12:54:59 Exp $
+ */
+
+#ifndef _dhd_proto_h_
+#define _dhd_proto_h_
+
+#include <dhdioctl.h>
+#include <wlioctl.h>
+
+#ifndef IOCTL_RESP_TIMEOUT
+#define IOCTL_RESP_TIMEOUT 3000 /* In milli second */
+#endif
+
+#ifndef IOCTL_CHIP_ACTIVE_TIMEOUT
+#define IOCTL_CHIP_ACTIVE_TIMEOUT 10 /* In milli second */
+#endif
+
+/*
+ * Exported from the dhd protocol module (dhd_cdc, dhd_rndis)
+ */
+
+/* Linkage, sets prot link and updates hdrlen in pub */
+extern int dhd_prot_attach(dhd_pub_t *dhdp);
+
+/* Unlink, frees allocated protocol memory (including dhd_prot) */
+extern void dhd_prot_detach(dhd_pub_t *dhdp);
+
+/* Initialize protocol: sync w/dongle state.
+ * Sets dongle media info (iswl, drv_version, mac address).
+ */
+extern int dhd_prot_init(dhd_pub_t *dhdp);
+
+/* Stop protocol: sync w/dongle state. */
+extern void dhd_prot_stop(dhd_pub_t *dhdp);
+
+extern bool dhd_proto_fcinfo(dhd_pub_t *dhd, void *pktbuf, uint8 *fcbits);
+
+/* Add any protocol-specific data header.
+ * Caller must reserve prot_hdrlen prepend space.
+ */
+extern void dhd_prot_hdrpush(dhd_pub_t *, int ifidx, void *txp);
+
+/* Remove any protocol-specific data header. */
+extern int dhd_prot_hdrpull(dhd_pub_t *, int *ifidx, void *rxp);
+
+/* Use protocol to issue ioctl to dongle */
+extern int dhd_prot_ioctl(dhd_pub_t *dhd, int ifidx, wl_ioctl_t * ioc, void * buf, int len);
+
+/* Check for and handle local prot-specific iovar commands */
+extern int dhd_prot_iovar_op(dhd_pub_t *dhdp, const char *name,
+ void *params, int plen, void *arg, int len, bool set);
+
+/* Add prot dump output to a buffer */
+extern void dhd_prot_dump(dhd_pub_t *dhdp, struct bcmstrbuf *strbuf);
+
+/* Update local copy of dongle statistics */
+extern void dhd_prot_dstats(dhd_pub_t *dhdp);
+
+extern int dhd_ioctl(dhd_pub_t * dhd_pub, dhd_ioctl_t *ioc, void * buf, uint buflen);
+
+extern int dhd_preinit_ioctls(dhd_pub_t *dhd);
+
+/********************************
+ * For version-string expansion *
+ */
+#if defined(BDC)
+#define DHD_PROTOCOL "bdc"
+#elif defined(CDC)
+#define DHD_PROTOCOL "cdc"
+#elif defined(RNDIS)
+#define DHD_PROTOCOL "rndis"
+#else
+#define DHD_PROTOCOL "unknown"
+#endif /* proto */
+
+#endif /* _dhd_proto_h_ */
diff --git a/drivers/net/wireless/bcm4329/dhd_sdio.c b/drivers/net/wireless/bcm4329/dhd_sdio.c
new file mode 100644
index 0000000..ac46ca9
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dhd_sdio.c
@@ -0,0 +1,5878 @@
+/*
+ * DHD Bus Module for SDIO
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhd_sdio.c,v 1.157.2.27.2.33.2.129.4.1 2010/09/02 23:13:16 Exp $
+ */
+
+#include <typedefs.h>
+#include <osl.h>
+#include <bcmsdh.h>
+
+#ifdef BCMEMBEDIMAGE
+#include BCMEMBEDIMAGE
+#endif /* BCMEMBEDIMAGE */
+
+#include <bcmdefs.h>
+#include <bcmutils.h>
+#include <bcmendian.h>
+#include <bcmdevs.h>
+#include <siutils.h>
+#include <hndpmu.h>
+#include <hndsoc.h>
+#include <sbchipc.h>
+#include <sbhnddma.h>
+#include <sdio.h>
+#include <sbsdio.h>
+#include <sbsdpcmdev.h>
+#include <bcmsdpcm.h>
+
+#include <proto/ethernet.h>
+#include <proto/802.1d.h>
+#include <proto/802.11.h>
+
+#include <dngl_stats.h>
+#include <dhd.h>
+#include <dhd_bus.h>
+#include <dhd_proto.h>
+#include <dhd_dbg.h>
+#include <dhdioctl.h>
+#include <sdiovar.h>
+
+#ifdef DHD_DEBUG
+#include <hndrte_cons.h>
+#endif /* DHD_DEBUG */
+#ifdef DHD_DEBUG_TRAP
+#include <hndrte_armtrap.h>
+#endif /* DHD_DEBUG_TRAP */
+
+#define QLEN 256 /* bulk rx and tx queue lengths */
+#define FCHI (QLEN - 10)
+#define FCLOW (FCHI / 2)
+#define PRIOMASK 7
+
+#define TXRETRIES 2 /* # of retries for tx frames */
+
+#if defined(CONFIG_MACH_SANDGATE2G)
+#define DHD_RXBOUND 250 /* Default for max rx frames in one scheduling */
+#else
+#define DHD_RXBOUND 50 /* Default for max rx frames in one scheduling */
+#endif /* defined(CONFIG_MACH_SANDGATE2G) */
+
+#define DHD_TXBOUND 20 /* Default for max tx frames in one scheduling */
+
+#define DHD_TXMINMAX 1 /* Max tx frames if rx still pending */
+
+#define MEMBLOCK 2048 /* Block size used for downloading of dongle image */
+#define MAX_DATA_BUF (32 * 1024) /* Must be large enough to hold biggest possible glom */
+
+/* Packet alignment for most efficient SDIO (can change based on platform) */
+#ifndef DHD_SDALIGN
+#define DHD_SDALIGN 32
+#endif
+#if !ISPOWEROF2(DHD_SDALIGN)
+#error DHD_SDALIGN is not a power of 2!
+#endif
+
+#ifndef DHD_FIRSTREAD
+#define DHD_FIRSTREAD 32
+#endif
+#if !ISPOWEROF2(DHD_FIRSTREAD)
+#error DHD_FIRSTREAD is not a power of 2!
+#endif
+
+/* Total length of frame header for dongle protocol */
+#define SDPCM_HDRLEN (SDPCM_FRAMETAG_LEN + SDPCM_SWHEADER_LEN)
+#ifdef SDTEST
+#define SDPCM_RESERVE (SDPCM_HDRLEN + SDPCM_TEST_HDRLEN + DHD_SDALIGN)
+#else
+#define SDPCM_RESERVE (SDPCM_HDRLEN + DHD_SDALIGN)
+#endif
+
+/* Space for header read, limit for data packets */
+#ifndef MAX_HDR_READ
+#define MAX_HDR_READ 32
+#endif
+#if !ISPOWEROF2(MAX_HDR_READ)
+#error MAX_HDR_READ is not a power of 2!
+#endif
+
+#define MAX_RX_DATASZ 2048
+
+/* Maximum milliseconds to wait for F2 to come up */
+#define DHD_WAIT_F2RDY 3000
+
+/* Bump up limit on waiting for HT to account for first startup;
+ * if the image is doing a CRC calculation before programming the PMU
+ * for HT availability, it could take a couple hundred ms more, so
+ * max out at a 1 second (1000000us).
+ */
+#if (PMU_MAX_TRANSITION_DLY < 1000000)
+#undef PMU_MAX_TRANSITION_DLY
+#define PMU_MAX_TRANSITION_DLY 1000000
+#endif
+
+/* Value for ChipClockCSR during initial setup */
+#define DHD_INIT_CLKCTL1 (SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ)
+#define DHD_INIT_CLKCTL2 (SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP)
+
+/* Flags for SDH calls */
+#define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED)
+
+/* Packet free applicable unconditionally for sdio and sdspi. Conditional if
+ * bufpool was present for gspi bus.
+ */
+#define PKTFREE2() if ((bus->bus != SPI_BUS) || bus->usebufpool) \
+ PKTFREE(bus->dhd->osh, pkt, FALSE);
+DHD_SPINWAIT_SLEEP_INIT(sdioh_spinwait_sleep);
+extern int dhdcdc_set_ioctl(dhd_pub_t *dhd, int ifidx, uint cmd, void *buf, uint len);
+
+#ifdef DHD_DEBUG
+/* Device console log buffer state */
+typedef struct dhd_console {
+ uint count; /* Poll interval msec counter */
+ uint log_addr; /* Log struct address (fixed) */
+ hndrte_log_t log; /* Log struct (host copy) */
+ uint bufsize; /* Size of log buffer */
+ uint8 *buf; /* Log buffer (host copy) */
+ uint last; /* Last buffer read index */
+} dhd_console_t;
+#endif /* DHD_DEBUG */
+
+/* Private data for SDIO bus interaction */
+typedef struct dhd_bus {
+ dhd_pub_t *dhd;
+
+ bcmsdh_info_t *sdh; /* Handle for BCMSDH calls */
+ si_t *sih; /* Handle for SI calls */
+ char *vars; /* Variables (from CIS and/or other) */
+ uint varsz; /* Size of variables buffer */
+ uint32 sbaddr; /* Current SB window pointer (-1, invalid) */
+
+ sdpcmd_regs_t *regs; /* Registers for SDIO core */
+ uint sdpcmrev; /* SDIO core revision */
+ uint armrev; /* CPU core revision */
+ uint ramrev; /* SOCRAM core revision */
+ uint32 ramsize; /* Size of RAM in SOCRAM (bytes) */
+ uint32 orig_ramsize; /* Size of RAM in SOCRAM (bytes) */
+
+ uint32 bus; /* gSPI or SDIO bus */
+ uint32 hostintmask; /* Copy of Host Interrupt Mask */
+ uint32 intstatus; /* Intstatus bits (events) pending */
+ bool dpc_sched; /* Indicates DPC schedule (intrpt rcvd) */
+ bool fcstate; /* State of dongle flow-control */
+
+ uint16 cl_devid; /* cached devid for dhdsdio_probe_attach() */
+ char *fw_path; /* module_param: path to firmware image */
+ char *nv_path; /* module_param: path to nvram vars file */
+ const char *nvram_params; /* user specified nvram params. */
+
+ uint blocksize; /* Block size of SDIO transfers */
+ uint roundup; /* Max roundup limit */
+
+ struct pktq txq; /* Queue length used for flow-control */
+ uint8 flowcontrol; /* per prio flow control bitmask */
+ uint8 tx_seq; /* Transmit sequence number (next) */
+ uint8 tx_max; /* Maximum transmit sequence allowed */
+
+ uint8 hdrbuf[MAX_HDR_READ + DHD_SDALIGN];
+ uint8 *rxhdr; /* Header of current rx frame (in hdrbuf) */
+ uint16 nextlen; /* Next Read Len from last header */
+ uint8 rx_seq; /* Receive sequence number (expected) */
+ bool rxskip; /* Skip receive (awaiting NAK ACK) */
+
+ void *glomd; /* Packet containing glomming descriptor */
+ void *glom; /* Packet chain for glommed superframe */
+ uint glomerr; /* Glom packet read errors */
+
+ uint8 *rxbuf; /* Buffer for receiving control packets */
+ uint rxblen; /* Allocated length of rxbuf */
+ uint8 *rxctl; /* Aligned pointer into rxbuf */
+ uint8 *databuf; /* Buffer for receiving big glom packet */
+ uint8 *dataptr; /* Aligned pointer into databuf */
+ uint rxlen; /* Length of valid data in buffer */
+
+ uint8 sdpcm_ver; /* Bus protocol reported by dongle */
+
+ bool intr; /* Use interrupts */
+ bool poll; /* Use polling */
+ bool ipend; /* Device interrupt is pending */
+ bool intdis; /* Interrupts disabled by isr */
+ uint intrcount; /* Count of device interrupt callbacks */
+ uint lastintrs; /* Count as of last watchdog timer */
+ uint spurious; /* Count of spurious interrupts */
+ uint pollrate; /* Ticks between device polls */
+ uint polltick; /* Tick counter */
+ uint pollcnt; /* Count of active polls */
+
+#ifdef DHD_DEBUG
+ dhd_console_t console; /* Console output polling support */
+ uint console_addr; /* Console address from shared struct */
+#endif /* DHD_DEBUG */
+
+ uint regfails; /* Count of R_REG/W_REG failures */
+
+ uint clkstate; /* State of sd and backplane clock(s) */
+ bool activity; /* Activity flag for clock down */
+ int32 idletime; /* Control for activity timeout */
+ int32 idlecount; /* Activity timeout counter */
+ int32 idleclock; /* How to set bus driver when idle */
+ int32 sd_divisor; /* Speed control to bus driver */
+ int32 sd_mode; /* Mode control to bus driver */
+ int32 sd_rxchain; /* If bcmsdh api accepts PKT chains */
+ bool use_rxchain; /* If dhd should use PKT chains */
+ bool sleeping; /* Is SDIO bus sleeping? */
+ bool rxflow_mode; /* Rx flow control mode */
+ bool rxflow; /* Is rx flow control on */
+ uint prev_rxlim_hit; /* Is prev rx limit exceeded (per dpc schedule) */
+ bool alp_only; /* Don't use HT clock (ALP only) */
+ /* Field to decide if rx of control frames happen in rxbuf or lb-pool */
+ bool usebufpool;
+
+#ifdef SDTEST
+ /* external loopback */
+ bool ext_loop;
+ uint8 loopid;
+
+ /* pktgen configuration */
+ uint pktgen_freq; /* Ticks between bursts */
+ uint pktgen_count; /* Packets to send each burst */
+ uint pktgen_print; /* Bursts between count displays */
+ uint pktgen_total; /* Stop after this many */
+ uint pktgen_minlen; /* Minimum packet data len */
+ uint pktgen_maxlen; /* Maximum packet data len */
+ uint pktgen_mode; /* Configured mode: tx, rx, or echo */
+ uint pktgen_stop; /* Number of tx failures causing stop */
+
+ /* active pktgen fields */
+ uint pktgen_tick; /* Tick counter for bursts */
+ uint pktgen_ptick; /* Burst counter for printing */
+ uint pktgen_sent; /* Number of test packets generated */
+ uint pktgen_rcvd; /* Number of test packets received */
+ uint pktgen_fail; /* Number of failed send attempts */
+ uint16 pktgen_len; /* Length of next packet to send */
+#endif /* SDTEST */
+
+ /* Some additional counters */
+ uint tx_sderrs; /* Count of tx attempts with sd errors */
+ uint fcqueued; /* Tx packets that got queued */
+ uint rxrtx; /* Count of rtx requests (NAK to dongle) */
+ uint rx_toolong; /* Receive frames too long to receive */
+ uint rxc_errors; /* SDIO errors when reading control frames */
+ uint rx_hdrfail; /* SDIO errors on header reads */
+ uint rx_badhdr; /* Bad received headers (roosync?) */
+ uint rx_badseq; /* Mismatched rx sequence number */
+ uint fc_rcvd; /* Number of flow-control events received */
+ uint fc_xoff; /* Number which turned on flow-control */
+ uint fc_xon; /* Number which turned off flow-control */
+ uint rxglomfail; /* Failed deglom attempts */
+ uint rxglomframes; /* Number of glom frames (superframes) */
+ uint rxglompkts; /* Number of packets from glom frames */
+ uint f2rxhdrs; /* Number of header reads */
+ uint f2rxdata; /* Number of frame data reads */
+ uint f2txdata; /* Number of f2 frame writes */
+ uint f1regdata; /* Number of f1 register accesses */
+
+ uint8 *ctrl_frame_buf;
+ uint32 ctrl_frame_len;
+ bool ctrl_frame_stat;
+} dhd_bus_t;
+
+/* clkstate */
+#define CLK_NONE 0
+#define CLK_SDONLY 1
+#define CLK_PENDING 2 /* Not used yet */
+#define CLK_AVAIL 3
+
+#define DHD_NOPMU(dhd) (FALSE)
+
+#ifdef DHD_DEBUG
+static int qcount[NUMPRIO];
+static int tx_packets[NUMPRIO];
+#endif /* DHD_DEBUG */
+
+/* Deferred transmit */
+const uint dhd_deferred_tx = 1;
+
+extern uint dhd_watchdog_ms;
+extern void dhd_os_wd_timer(void *bus, uint wdtick);
+
+/* Tx/Rx bounds */
+uint dhd_txbound;
+uint dhd_rxbound;
+uint dhd_txminmax;
+
+/* override the RAM size if possible */
+#define DONGLE_MIN_MEMSIZE (128 *1024)
+int dhd_dongle_memsize;
+
+static bool dhd_doflow;
+static bool dhd_alignctl;
+
+static bool sd1idle;
+
+static bool retrydata;
+#define RETRYCHAN(chan) (((chan) == SDPCM_EVENT_CHANNEL) || retrydata)
+
+static const uint watermark = 8;
+static const uint firstread = DHD_FIRSTREAD;
+
+#define HDATLEN (firstread - (SDPCM_HDRLEN))
+
+/* Retry count for register access failures */
+static const uint retry_limit = 2;
+
+/* Force even SD lengths (some host controllers mess up on odd bytes) */
+static bool forcealign;
+
+#define ALIGNMENT 4
+
+#if defined(OOB_INTR_ONLY) && defined(HW_OOB)
+extern void bcmsdh_enable_hw_oob_intr(void *sdh, bool enable);
+#endif
+
+#if defined(OOB_INTR_ONLY) && defined(SDIO_ISR_THREAD)
+#error OOB_INTR_ONLY is NOT working with SDIO_ISR_THREAD
+#endif /* defined(OOB_INTR_ONLY) && defined(SDIO_ISR_THREAD) */
+#define PKTALIGN(osh, p, len, align) \
+ do { \
+ uint datalign; \
+ datalign = (uintptr)PKTDATA((osh), (p)); \
+ datalign = ROUNDUP(datalign, (align)) - datalign; \
+ ASSERT(datalign < (align)); \
+ ASSERT(PKTLEN((osh), (p)) >= ((len) + datalign)); \
+ if (datalign) \
+ PKTPULL((osh), (p), datalign); \
+ PKTSETLEN((osh), (p), (len)); \
+ } while (0)
+
+/* Limit on rounding up frames */
+static const uint max_roundup = 512;
+
+/* Try doing readahead */
+static bool dhd_readahead;
+
+
+/* To check if there's window offered */
+#define DATAOK(bus) \
+ (((uint8)(bus->tx_max - bus->tx_seq) != 0) && \
+ (((uint8)(bus->tx_max - bus->tx_seq) & 0x80) == 0))
+
+/* Macros to get register read/write status */
+/* NOTE: these assume a local dhdsdio_bus_t *bus! */
+#define R_SDREG(regvar, regaddr, retryvar) \
+do { \
+ retryvar = 0; \
+ do { \
+ regvar = R_REG(bus->dhd->osh, regaddr); \
+ } while (bcmsdh_regfail(bus->sdh) && (++retryvar <= retry_limit)); \
+ if (retryvar) { \
+ bus->regfails += (retryvar-1); \
+ if (retryvar > retry_limit) { \
+ DHD_ERROR(("%s: FAILED" #regvar "READ, LINE %d\n", \
+ __FUNCTION__, __LINE__)); \
+ regvar = 0; \
+ } \
+ } \
+} while (0)
+
+#define W_SDREG(regval, regaddr, retryvar) \
+do { \
+ retryvar = 0; \
+ do { \
+ W_REG(bus->dhd->osh, regaddr, regval); \
+ } while (bcmsdh_regfail(bus->sdh) && (++retryvar <= retry_limit)); \
+ if (retryvar) { \
+ bus->regfails += (retryvar-1); \
+ if (retryvar > retry_limit) \
+ DHD_ERROR(("%s: FAILED REGISTER WRITE, LINE %d\n", \
+ __FUNCTION__, __LINE__)); \
+ } \
+} while (0)
+
+
+#define DHD_BUS SDIO_BUS
+
+#define PKT_AVAILABLE() (intstatus & I_HMB_FRAME_IND)
+
+#define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE)
+
+#define GSPI_PR55150_BAILOUT
+
+
+#ifdef SDTEST
+static void dhdsdio_testrcv(dhd_bus_t *bus, void *pkt, uint seq);
+static void dhdsdio_sdtest_set(dhd_bus_t *bus, bool start);
+#endif
+
+#ifdef DHD_DEBUG_TRAP
+static int dhdsdio_checkdied(dhd_bus_t *bus, uint8 *data, uint size);
+static int dhdsdio_mem_dump(dhd_bus_t *bus);
+#endif /* DHD_DEBUG_TRAP */
+static int dhdsdio_download_state(dhd_bus_t *bus, bool enter);
+
+static void dhdsdio_release(dhd_bus_t *bus, osl_t *osh);
+static void dhdsdio_release_malloc(dhd_bus_t *bus, osl_t *osh);
+static void dhdsdio_disconnect(void *ptr);
+static bool dhdsdio_chipmatch(uint16 chipid);
+static bool dhdsdio_probe_attach(dhd_bus_t *bus, osl_t *osh, void *sdh,
+ void * regsva, uint16 devid);
+static bool dhdsdio_probe_malloc(dhd_bus_t *bus, osl_t *osh, void *sdh);
+static bool dhdsdio_probe_init(dhd_bus_t *bus, osl_t *osh, void *sdh);
+static void dhdsdio_release_dongle(dhd_bus_t *bus, osl_t *osh, int reset_flag);
+
+static uint process_nvram_vars(char *varbuf, uint len);
+
+static void dhd_dongle_setmemsize(struct dhd_bus *bus, int mem_size);
+static int dhd_bcmsdh_recv_buf(dhd_bus_t *bus, uint32 addr, uint fn, uint flags,
+ uint8 *buf, uint nbytes,
+ void *pkt, bcmsdh_cmplt_fn_t complete, void *handle);
+static int dhd_bcmsdh_send_buf(dhd_bus_t *bus, uint32 addr, uint fn, uint flags,
+ uint8 *buf, uint nbytes,
+ void *pkt, bcmsdh_cmplt_fn_t complete, void *handle);
+
+static bool dhdsdio_download_firmware(struct dhd_bus *bus, osl_t *osh, void *sdh);
+static int _dhdsdio_download_firmware(struct dhd_bus *bus);
+
+static int dhdsdio_download_code_file(struct dhd_bus *bus, char *image_path);
+static int dhdsdio_download_nvram(struct dhd_bus *bus);
+#ifdef BCMEMBEDIMAGE
+static int dhdsdio_download_code_array(struct dhd_bus *bus);
+#endif
+
+
+static void
+dhd_dongle_setmemsize(struct dhd_bus *bus, int mem_size)
+{
+ int32 min_size = DONGLE_MIN_MEMSIZE;
+ /* Restrict the memsize to user specified limit */
+ DHD_ERROR(("user: Restrict the dongle ram size to %d, min accepted %d\n",
+ dhd_dongle_memsize, min_size));
+ if ((dhd_dongle_memsize > min_size) &&
+ (dhd_dongle_memsize < (int32)bus->orig_ramsize))
+ bus->ramsize = dhd_dongle_memsize;
+}
+
+static int
+dhdsdio_set_siaddr_window(dhd_bus_t *bus, uint32 address)
+{
+ int err = 0;
+ bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRLOW,
+ (address >> 8) & SBSDIO_SBADDRLOW_MASK, &err);
+ if (!err)
+ bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRMID,
+ (address >> 16) & SBSDIO_SBADDRMID_MASK, &err);
+ if (!err)
+ bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SBADDRHIGH,
+ (address >> 24) & SBSDIO_SBADDRHIGH_MASK, &err);
+ return err;
+}
+
+
+/* Turn backplane clock on or off */
+static int
+dhdsdio_htclk(dhd_bus_t *bus, bool on, bool pendok)
+{
+ int err;
+ uint8 clkctl, clkreq, devctl;
+ bcmsdh_info_t *sdh;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+#if defined(OOB_INTR_ONLY)
+ pendok = FALSE;
+#endif
+ clkctl = 0;
+ sdh = bus->sdh;
+
+
+ if (on) {
+ /* Request HT Avail */
+ clkreq = bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
+
+ if ((bus->sih->chip == BCM4329_CHIP_ID) && (bus->sih->chiprev == 0))
+ clkreq |= SBSDIO_FORCE_ALP;
+
+
+
+
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err);
+ if (err) {
+ DHD_ERROR(("%s: HT Avail request error: %d\n", __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+
+ if (pendok &&
+ ((bus->sih->buscoretype == PCMCIA_CORE_ID) && (bus->sih->buscorerev == 9))) {
+ uint32 dummy, retries;
+ R_SDREG(dummy, &bus->regs->clockctlstatus, retries);
+ }
+
+ /* Check current status */
+ clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err);
+ if (err) {
+ DHD_ERROR(("%s: HT Avail read error: %d\n", __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+
+ /* Go to pending and await interrupt if appropriate */
+ if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
+ /* Allow only clock-available interrupt */
+ devctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err);
+ if (err) {
+ DHD_ERROR(("%s: Devctl access error setting CA: %d\n",
+ __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+
+ devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, devctl, &err);
+ DHD_INFO(("CLKCTL: set PENDING\n"));
+ bus->clkstate = CLK_PENDING;
+ return BCME_OK;
+ } else if (bus->clkstate == CLK_PENDING) {
+ /* Cancel CA-only interrupt filter */
+ devctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err);
+ devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, devctl, &err);
+ }
+
+ /* Otherwise, wait here (polling) for HT Avail */
+ if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
+ SPINWAIT_SLEEP(sdioh_spinwait_sleep,
+ ((clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
+ SBSDIO_FUNC1_CHIPCLKCSR, &err)),
+ !SBSDIO_CLKAV(clkctl, bus->alp_only)), PMU_MAX_TRANSITION_DLY);
+ }
+ if (err) {
+ DHD_ERROR(("%s: HT Avail request error: %d\n", __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+ if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
+ DHD_ERROR(("%s: HT Avail timeout (%d): clkctl 0x%02x\n",
+ __FUNCTION__, PMU_MAX_TRANSITION_DLY, clkctl));
+ return BCME_ERROR;
+ }
+
+
+ /* Mark clock available */
+ bus->clkstate = CLK_AVAIL;
+ DHD_INFO(("CLKCTL: turned ON\n"));
+
+#if defined(DHD_DEBUG)
+ if (bus->alp_only == TRUE) {
+#if !defined(BCMLXSDMMC)
+ if (!SBSDIO_ALPONLY(clkctl)) {
+ DHD_ERROR(("%s: HT Clock, when ALP Only\n", __FUNCTION__));
+ }
+#endif /* !defined(BCMLXSDMMC) */
+ } else {
+ if (SBSDIO_ALPONLY(clkctl)) {
+ DHD_ERROR(("%s: HT Clock should be on.\n", __FUNCTION__));
+ }
+ }
+#endif /* defined (DHD_DEBUG) */
+
+ bus->activity = TRUE;
+ } else {
+ clkreq = 0;
+
+ if (bus->clkstate == CLK_PENDING) {
+ /* Cancel CA-only interrupt filter */
+ devctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err);
+ devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, devctl, &err);
+ }
+
+ bus->clkstate = CLK_SDONLY;
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, clkreq, &err);
+ DHD_INFO(("CLKCTL: turned OFF\n"));
+ if (err) {
+ DHD_ERROR(("%s: Failed access turning clock off: %d\n",
+ __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+ }
+ return BCME_OK;
+}
+
+/* Change idle/active SD state */
+static int
+dhdsdio_sdclk(dhd_bus_t *bus, bool on)
+{
+ int err;
+ int32 iovalue;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (on) {
+ if (bus->idleclock == DHD_IDLE_STOP) {
+ /* Turn on clock and restore mode */
+ iovalue = 1;
+ err = bcmsdh_iovar_op(bus->sdh, "sd_clock", NULL, 0,
+ &iovalue, sizeof(iovalue), TRUE);
+ if (err) {
+ DHD_ERROR(("%s: error enabling sd_clock: %d\n",
+ __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+
+ iovalue = bus->sd_mode;
+ err = bcmsdh_iovar_op(bus->sdh, "sd_mode", NULL, 0,
+ &iovalue, sizeof(iovalue), TRUE);
+ if (err) {
+ DHD_ERROR(("%s: error changing sd_mode: %d\n",
+ __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+ } else if (bus->idleclock != DHD_IDLE_ACTIVE) {
+ /* Restore clock speed */
+ iovalue = bus->sd_divisor;
+ err = bcmsdh_iovar_op(bus->sdh, "sd_divisor", NULL, 0,
+ &iovalue, sizeof(iovalue), TRUE);
+ if (err) {
+ DHD_ERROR(("%s: error restoring sd_divisor: %d\n",
+ __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+ }
+ bus->clkstate = CLK_SDONLY;
+ } else {
+ /* Stop or slow the SD clock itself */
+ if ((bus->sd_divisor == -1) || (bus->sd_mode == -1)) {
+ DHD_TRACE(("%s: can't idle clock, divisor %d mode %d\n",
+ __FUNCTION__, bus->sd_divisor, bus->sd_mode));
+ return BCME_ERROR;
+ }
+ if (bus->idleclock == DHD_IDLE_STOP) {
+ if (sd1idle) {
+ /* Change to SD1 mode and turn off clock */
+ iovalue = 1;
+ err = bcmsdh_iovar_op(bus->sdh, "sd_mode", NULL, 0,
+ &iovalue, sizeof(iovalue), TRUE);
+ if (err) {
+ DHD_ERROR(("%s: error changing sd_clock: %d\n",
+ __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+ }
+
+ iovalue = 0;
+ err = bcmsdh_iovar_op(bus->sdh, "sd_clock", NULL, 0,
+ &iovalue, sizeof(iovalue), TRUE);
+ if (err) {
+ DHD_ERROR(("%s: error disabling sd_clock: %d\n",
+ __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+ } else if (bus->idleclock != DHD_IDLE_ACTIVE) {
+ /* Set divisor to idle value */
+ iovalue = bus->idleclock;
+ err = bcmsdh_iovar_op(bus->sdh, "sd_divisor", NULL, 0,
+ &iovalue, sizeof(iovalue), TRUE);
+ if (err) {
+ DHD_ERROR(("%s: error changing sd_divisor: %d\n",
+ __FUNCTION__, err));
+ return BCME_ERROR;
+ }
+ }
+ bus->clkstate = CLK_NONE;
+ }
+
+ return BCME_OK;
+}
+
+/* Transition SD and backplane clock readiness */
+static int
+dhdsdio_clkctl(dhd_bus_t *bus, uint target, bool pendok)
+{
+ int ret = BCME_OK;
+#ifdef DHD_DEBUG
+ uint oldstate = bus->clkstate;
+#endif /* DHD_DEBUG */
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ /* Early exit if we're already there */
+ if (bus->clkstate == target) {
+ if (target == CLK_AVAIL) {
+ dhd_os_wd_timer(bus->dhd, dhd_watchdog_ms);
+ bus->activity = TRUE;
+ }
+ return ret;
+ }
+
+ switch (target) {
+ case CLK_AVAIL:
+ /* Make sure SD clock is available */
+ if (bus->clkstate == CLK_NONE)
+ dhdsdio_sdclk(bus, TRUE);
+ /* Now request HT Avail on the backplane */
+ ret = dhdsdio_htclk(bus, TRUE, pendok);
+ if (ret == BCME_OK) {
+ dhd_os_wd_timer(bus->dhd, dhd_watchdog_ms);
+ bus->activity = TRUE;
+ }
+ break;
+
+ case CLK_SDONLY:
+ /* Remove HT request, or bring up SD clock */
+ if (bus->clkstate == CLK_NONE)
+ ret = dhdsdio_sdclk(bus, TRUE);
+ else if (bus->clkstate == CLK_AVAIL)
+ ret = dhdsdio_htclk(bus, FALSE, FALSE);
+ else
+ DHD_ERROR(("dhdsdio_clkctl: request for %d -> %d\n",
+ bus->clkstate, target));
+ if (ret == BCME_OK)
+ dhd_os_wd_timer(bus->dhd, dhd_watchdog_ms);
+ break;
+
+ case CLK_NONE:
+ /* Make sure to remove HT request */
+ if (bus->clkstate == CLK_AVAIL)
+ ret = dhdsdio_htclk(bus, FALSE, FALSE);
+ /* Now remove the SD clock */
+ ret = dhdsdio_sdclk(bus, FALSE);
+ dhd_os_wd_timer(bus->dhd, 0);
+ break;
+ }
+#ifdef DHD_DEBUG
+ DHD_INFO(("dhdsdio_clkctl: %d -> %d\n", oldstate, bus->clkstate));
+#endif /* DHD_DEBUG */
+
+ return ret;
+}
+
+int
+dhdsdio_bussleep(dhd_bus_t *bus, bool sleep)
+{
+ bcmsdh_info_t *sdh = bus->sdh;
+ sdpcmd_regs_t *regs = bus->regs;
+ uint retries = 0;
+
+ DHD_INFO(("dhdsdio_bussleep: request %s (currently %s)\n",
+ (sleep ? "SLEEP" : "WAKE"),
+ (bus->sleeping ? "SLEEP" : "WAKE")));
+
+ /* Done if we're already in the requested state */
+ if (sleep == bus->sleeping)
+ return BCME_OK;
+
+ /* Going to sleep: set the alarm and turn off the lights... */
+ if (sleep) {
+ /* Don't sleep if something is pending */
+ if (bus->dpc_sched || bus->rxskip || pktq_len(&bus->txq))
+ return BCME_BUSY;
+
+
+ /* Disable SDIO interrupts (no longer interested) */
+ bcmsdh_intr_disable(bus->sdh);
+
+ /* Make sure the controller has the bus up */
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+
+ /* Tell device to start using OOB wakeup */
+ W_SDREG(SMB_USE_OOB, ®s->tosbmailbox, retries);
+ if (retries > retry_limit)
+ DHD_ERROR(("CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n"));
+
+ /* Turn off our contribution to the HT clock request */
+ dhdsdio_clkctl(bus, CLK_SDONLY, FALSE);
+
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR,
+ SBSDIO_FORCE_HW_CLKREQ_OFF, NULL);
+
+ /* Isolate the bus */
+ if (bus->sih->chip != BCM4329_CHIP_ID && bus->sih->chip != BCM4319_CHIP_ID) {
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL,
+ SBSDIO_DEVCTL_PADS_ISO, NULL);
+ }
+
+ /* Change state */
+ bus->sleeping = TRUE;
+
+ } else {
+ /* Waking up: bus power up is ok, set local state */
+
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR,
+ 0, NULL);
+
+ /* Force pad isolation off if possible (in case power never toggled) */
+ if ((bus->sih->buscoretype == PCMCIA_CORE_ID) && (bus->sih->buscorerev >= 10))
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, 0, NULL);
+
+
+ /* Make sure the controller has the bus up */
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+
+ /* Send misc interrupt to indicate OOB not needed */
+ W_SDREG(0, ®s->tosbmailboxdata, retries);
+ if (retries <= retry_limit)
+ W_SDREG(SMB_DEV_INT, ®s->tosbmailbox, retries);
+
+ if (retries > retry_limit)
+ DHD_ERROR(("CANNOT SIGNAL CHIP TO CLEAR OOB!!\n"));
+
+ /* Make sure we have SD bus access */
+ dhdsdio_clkctl(bus, CLK_SDONLY, FALSE);
+
+ /* Change state */
+ bus->sleeping = FALSE;
+
+ /* Enable interrupts again */
+ if (bus->intr && (bus->dhd->busstate == DHD_BUS_DATA)) {
+ bus->intdis = FALSE;
+ bcmsdh_intr_enable(bus->sdh);
+ }
+ }
+
+ return BCME_OK;
+}
+#if defined(OOB_INTR_ONLY)
+void
+dhd_enable_oob_intr(struct dhd_bus *bus, bool enable)
+{
+#if defined(HW_OOB)
+ bcmsdh_enable_hw_oob_intr(bus->sdh, enable);
+#else
+ sdpcmd_regs_t *regs = bus->regs;
+ uint retries = 0;
+
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+ if (enable == TRUE) {
+
+ /* Tell device to start using OOB wakeup */
+ W_SDREG(SMB_USE_OOB, ®s->tosbmailbox, retries);
+ if (retries > retry_limit)
+ DHD_ERROR(("CANNOT SIGNAL CHIP, WILL NOT WAKE UP!!\n"));
+
+ } else {
+ /* Send misc interrupt to indicate OOB not needed */
+ W_SDREG(0, ®s->tosbmailboxdata, retries);
+ if (retries <= retry_limit)
+ W_SDREG(SMB_DEV_INT, ®s->tosbmailbox, retries);
+ }
+
+ /* Turn off our contribution to the HT clock request */
+ dhdsdio_clkctl(bus, CLK_SDONLY, FALSE);
+#endif /* !defined(HW_OOB) */
+}
+#endif /* defined(OOB_INTR_ONLY) */
+
+#define BUS_WAKE(bus) \
+ do { \
+ if ((bus)->sleeping) \
+ dhdsdio_bussleep((bus), FALSE); \
+ } while (0);
+
+
+/* Writes a HW/SW header into the packet and sends it. */
+/* Assumes: (a) header space already there, (b) caller holds lock */
+static int
+dhdsdio_txpkt(dhd_bus_t *bus, void *pkt, uint chan, bool free_pkt)
+{
+ int ret;
+ osl_t *osh;
+ uint8 *frame;
+ uint16 len, pad = 0;
+ uint32 swheader;
+ uint retries = 0;
+ bcmsdh_info_t *sdh;
+ void *new;
+ int i;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ sdh = bus->sdh;
+ osh = bus->dhd->osh;
+
+ if (bus->dhd->dongle_reset) {
+ ret = BCME_NOTREADY;
+ goto done;
+ }
+
+ frame = (uint8*)PKTDATA(osh, pkt);
+
+ /* Add alignment padding, allocate new packet if needed */
+ if ((pad = ((uintptr)frame % DHD_SDALIGN))) {
+ if (PKTHEADROOM(osh, pkt) < pad) {
+ DHD_INFO(("%s: insufficient headroom %d for %d pad\n",
+ __FUNCTION__, (int)PKTHEADROOM(osh, pkt), pad));
+ bus->dhd->tx_realloc++;
+ new = PKTGET(osh, (PKTLEN(osh, pkt) + DHD_SDALIGN), TRUE);
+ if (!new) {
+ DHD_ERROR(("%s: couldn't allocate new %d-byte packet\n",
+ __FUNCTION__, PKTLEN(osh, pkt) + DHD_SDALIGN));
+ ret = BCME_NOMEM;
+ goto done;
+ }
+
+ PKTALIGN(osh, new, PKTLEN(osh, pkt), DHD_SDALIGN);
+ bcopy(PKTDATA(osh, pkt), PKTDATA(osh, new), PKTLEN(osh, pkt));
+ if (free_pkt)
+ PKTFREE(osh, pkt, TRUE);
+ /* free the pkt if canned one is not used */
+ free_pkt = TRUE;
+ pkt = new;
+ frame = (uint8*)PKTDATA(osh, pkt);
+ ASSERT(((uintptr)frame % DHD_SDALIGN) == 0);
+ pad = 0;
+ } else {
+ PKTPUSH(osh, pkt, pad);
+ frame = (uint8*)PKTDATA(osh, pkt);
+
+ ASSERT((pad + SDPCM_HDRLEN) <= (int) PKTLEN(osh, pkt));
+ bzero(frame, pad + SDPCM_HDRLEN);
+ }
+ }
+ ASSERT(pad < DHD_SDALIGN);
+
+ /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
+ len = (uint16)PKTLEN(osh, pkt);
+ *(uint16*)frame = htol16(len);
+ *(((uint16*)frame) + 1) = htol16(~len);
+
+ /* Software tag: channel, sequence number, data offset */
+ swheader = ((chan << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK) | bus->tx_seq |
+ (((pad + SDPCM_HDRLEN) << SDPCM_DOFFSET_SHIFT) & SDPCM_DOFFSET_MASK);
+ htol32_ua_store(swheader, frame + SDPCM_FRAMETAG_LEN);
+ htol32_ua_store(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader));
+
+#ifdef DHD_DEBUG
+ tx_packets[PKTPRIO(pkt)]++;
+ if (DHD_BYTES_ON() &&
+ (((DHD_CTL_ON() && (chan == SDPCM_CONTROL_CHANNEL)) ||
+ (DHD_DATA_ON() && (chan != SDPCM_CONTROL_CHANNEL))))) {
+ prhex("Tx Frame", frame, len);
+ } else if (DHD_HDRS_ON()) {
+ prhex("TxHdr", frame, MIN(len, 16));
+ }
+#endif
+
+ /* Raise len to next SDIO block to eliminate tail command */
+ if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
+ uint16 pad = bus->blocksize - (len % bus->blocksize);
+ if ((pad <= bus->roundup) && (pad < bus->blocksize))
+#ifdef NOTUSED
+ if (pad <= PKTTAILROOM(osh, pkt))
+#endif /* NOTUSED */
+ len += pad;
+ } else if (len % DHD_SDALIGN) {
+ len += DHD_SDALIGN - (len % DHD_SDALIGN);
+ }
+
+ /* Some controllers have trouble with odd bytes -- round to even */
+ if (forcealign && (len & (ALIGNMENT - 1))) {
+#ifdef NOTUSED
+ if (PKTTAILROOM(osh, pkt))
+#endif
+ len = ROUNDUP(len, ALIGNMENT);
+#ifdef NOTUSED
+ else
+ DHD_ERROR(("%s: sending unrounded %d-byte packet\n", __FUNCTION__, len));
+#endif
+ }
+
+ do {
+ ret = dhd_bcmsdh_send_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC,
+ frame, len, pkt, NULL, NULL);
+ bus->f2txdata++;
+ ASSERT(ret != BCME_PENDING);
+
+ if (ret < 0) {
+ /* On failure, abort the command and terminate the frame */
+ DHD_INFO(("%s: sdio error %d, abort command and terminate frame.\n",
+ __FUNCTION__, ret));
+ bus->tx_sderrs++;
+
+ bcmsdh_abort(sdh, SDIO_FUNC_2);
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_FRAMECTRL,
+ SFC_WF_TERM, NULL);
+ bus->f1regdata++;
+
+ for (i = 0; i < 3; i++) {
+ uint8 hi, lo;
+ hi = bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
+ SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+ lo = bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
+ SBSDIO_FUNC1_WFRAMEBCLO, NULL);
+ bus->f1regdata += 2;
+ if ((hi == 0) && (lo == 0))
+ break;
+ }
+
+ }
+ if (ret == 0) {
+ bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
+ }
+ } while ((ret < 0) && retrydata && retries++ < TXRETRIES);
+
+done:
+ /* restore pkt buffer pointer before calling tx complete routine */
+ PKTPULL(osh, pkt, SDPCM_HDRLEN + pad);
+ dhd_os_sdunlock(bus->dhd);
+ dhd_txcomplete(bus->dhd, pkt, ret != 0);
+ dhd_os_sdlock(bus->dhd);
+
+ if (free_pkt)
+ PKTFREE(osh, pkt, TRUE);
+
+ return ret;
+}
+
+int
+dhd_bus_txdata(struct dhd_bus *bus, void *pkt)
+{
+ int ret = BCME_ERROR;
+ osl_t *osh;
+ uint datalen, prec;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ osh = bus->dhd->osh;
+ datalen = PKTLEN(osh, pkt);
+
+#ifdef SDTEST
+ /* Push the test header if doing loopback */
+ if (bus->ext_loop) {
+ uint8* data;
+ PKTPUSH(osh, pkt, SDPCM_TEST_HDRLEN);
+ data = PKTDATA(osh, pkt);
+ *data++ = SDPCM_TEST_ECHOREQ;
+ *data++ = (uint8)bus->loopid++;
+ *data++ = (datalen >> 0);
+ *data++ = (datalen >> 8);
+ datalen += SDPCM_TEST_HDRLEN;
+ }
+#endif /* SDTEST */
+
+ /* Add space for the header */
+ PKTPUSH(osh, pkt, SDPCM_HDRLEN);
+ ASSERT(ISALIGNED((uintptr)PKTDATA(osh, pkt), 2));
+
+ prec = PRIO2PREC((PKTPRIO(pkt) & PRIOMASK));
+
+
+ /* Check for existing queue, current flow-control, pending event, or pending clock */
+ if (dhd_deferred_tx || bus->fcstate || pktq_len(&bus->txq) || bus->dpc_sched ||
+ (!DATAOK(bus)) || (bus->flowcontrol & NBITVAL(prec)) ||
+ (bus->clkstate != CLK_AVAIL)) {
+ DHD_TRACE(("%s: deferring pktq len %d\n", __FUNCTION__,
+ pktq_len(&bus->txq)));
+ bus->fcqueued++;
+
+ /* Priority based enq */
+ dhd_os_sdlock_txq(bus->dhd);
+ if (dhd_prec_enq(bus->dhd, &bus->txq, pkt, prec) == FALSE) {
+ PKTPULL(osh, pkt, SDPCM_HDRLEN);
+ dhd_txcomplete(bus->dhd, pkt, FALSE);
+ PKTFREE(osh, pkt, TRUE);
+ DHD_ERROR(("%s: out of bus->txq !!!\n", __FUNCTION__));
+ ret = BCME_NORESOURCE;
+ } else {
+ ret = BCME_OK;
+ }
+ dhd_os_sdunlock_txq(bus->dhd);
+
+ if ((pktq_len(&bus->txq) >= FCHI) && dhd_doflow)
+ dhd_txflowcontrol(bus->dhd, 0, ON);
+
+#ifdef DHD_DEBUG
+ if (pktq_plen(&bus->txq, prec) > qcount[prec])
+ qcount[prec] = pktq_plen(&bus->txq, prec);
+#endif
+ /* Schedule DPC if needed to send queued packet(s) */
+ if (dhd_deferred_tx && !bus->dpc_sched) {
+ bus->dpc_sched = TRUE;
+ dhd_sched_dpc(bus->dhd);
+ }
+ } else {
+ /* Lock: we're about to use shared data/code (and SDIO) */
+ dhd_os_sdlock(bus->dhd);
+
+ /* Otherwise, send it now */
+ BUS_WAKE(bus);
+ /* Make sure back plane ht clk is on, no pending allowed */
+ dhdsdio_clkctl(bus, CLK_AVAIL, TRUE);
+
+#ifndef SDTEST
+ DHD_TRACE(("%s: calling txpkt\n", __FUNCTION__));
+ ret = dhdsdio_txpkt(bus, pkt, SDPCM_DATA_CHANNEL, TRUE);
+#else
+ ret = dhdsdio_txpkt(bus, pkt,
+ (bus->ext_loop ? SDPCM_TEST_CHANNEL : SDPCM_DATA_CHANNEL), TRUE);
+#endif
+ if (ret)
+ bus->dhd->tx_errors++;
+ else
+ bus->dhd->dstats.tx_bytes += datalen;
+
+ if ((bus->idletime == DHD_IDLE_IMMEDIATE) && !bus->dpc_sched) {
+ bus->activity = FALSE;
+ dhdsdio_clkctl(bus, CLK_NONE, TRUE);
+ }
+
+ dhd_os_sdunlock(bus->dhd);
+ }
+
+
+ return ret;
+}
+
+static uint
+dhdsdio_sendfromq(dhd_bus_t *bus, uint maxframes)
+{
+ void *pkt;
+ uint32 intstatus = 0;
+ uint retries = 0;
+ int ret = 0, prec_out;
+ uint cnt = 0;
+ uint datalen;
+ uint8 tx_prec_map;
+
+ dhd_pub_t *dhd = bus->dhd;
+ sdpcmd_regs_t *regs = bus->regs;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ tx_prec_map = ~bus->flowcontrol;
+
+ /* Send frames until the limit or some other event */
+ for (cnt = 0; (cnt < maxframes) && DATAOK(bus); cnt++) {
+ dhd_os_sdlock_txq(bus->dhd);
+ if ((pkt = pktq_mdeq(&bus->txq, tx_prec_map, &prec_out)) == NULL) {
+ dhd_os_sdunlock_txq(bus->dhd);
+ break;
+ }
+ dhd_os_sdunlock_txq(bus->dhd);
+ datalen = PKTLEN(bus->dhd->osh, pkt) - SDPCM_HDRLEN;
+
+#ifndef SDTEST
+ ret = dhdsdio_txpkt(bus, pkt, SDPCM_DATA_CHANNEL, TRUE);
+#else
+ ret = dhdsdio_txpkt(bus, pkt,
+ (bus->ext_loop ? SDPCM_TEST_CHANNEL : SDPCM_DATA_CHANNEL), TRUE);
+#endif
+ if (ret)
+ bus->dhd->tx_errors++;
+ else
+ bus->dhd->dstats.tx_bytes += datalen;
+
+ /* In poll mode, need to check for other events */
+ if (!bus->intr && cnt)
+ {
+ /* Check device status, signal pending interrupt */
+ R_SDREG(intstatus, ®s->intstatus, retries);
+ bus->f2txdata++;
+ if (bcmsdh_regfail(bus->sdh))
+ break;
+ if (intstatus & bus->hostintmask)
+ bus->ipend = TRUE;
+ }
+ }
+
+ /* Deflow-control stack if needed */
+ if (dhd_doflow && dhd->up && (dhd->busstate == DHD_BUS_DATA) &&
+ dhd->txoff && (pktq_len(&bus->txq) < FCLOW))
+ dhd_txflowcontrol(dhd, 0, OFF);
+
+ return cnt;
+}
+
+int
+dhd_bus_txctl(struct dhd_bus *bus, uchar *msg, uint msglen)
+{
+ uint8 *frame;
+ uint16 len;
+ uint32 swheader;
+ uint retries = 0;
+ bcmsdh_info_t *sdh = bus->sdh;
+ uint8 doff = 0;
+ int ret = -1;
+ int i;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (bus->dhd->dongle_reset)
+ return -EIO;
+
+ /* Back the pointer to make a room for bus header */
+ frame = msg - SDPCM_HDRLEN;
+ len = (msglen += SDPCM_HDRLEN);
+
+ /* Add alignment padding (optional for ctl frames) */
+ if (dhd_alignctl) {
+ if ((doff = ((uintptr)frame % DHD_SDALIGN))) {
+ frame -= doff;
+ len += doff;
+ msglen += doff;
+ bzero(frame, doff + SDPCM_HDRLEN);
+ }
+ ASSERT(doff < DHD_SDALIGN);
+ }
+ doff += SDPCM_HDRLEN;
+
+ /* Round send length to next SDIO block */
+ if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
+ uint16 pad = bus->blocksize - (len % bus->blocksize);
+ if ((pad <= bus->roundup) && (pad < bus->blocksize))
+ len += pad;
+ } else if (len % DHD_SDALIGN) {
+ len += DHD_SDALIGN - (len % DHD_SDALIGN);
+ }
+
+ /* Satisfy length-alignment requirements */
+ if (forcealign && (len & (ALIGNMENT - 1)))
+ len = ROUNDUP(len, ALIGNMENT);
+
+ ASSERT(ISALIGNED((uintptr)frame, 2));
+
+
+ /* Need to lock here to protect txseq and SDIO tx calls */
+ dhd_os_sdlock(bus->dhd);
+
+ BUS_WAKE(bus);
+
+ /* Make sure backplane clock is on */
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+
+ /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */
+ *(uint16*)frame = htol16((uint16)msglen);
+ *(((uint16*)frame) + 1) = htol16(~msglen);
+
+ /* Software tag: channel, sequence number, data offset */
+ swheader = ((SDPCM_CONTROL_CHANNEL << SDPCM_CHANNEL_SHIFT) & SDPCM_CHANNEL_MASK)
+ | bus->tx_seq | ((doff << SDPCM_DOFFSET_SHIFT) & SDPCM_DOFFSET_MASK);
+ htol32_ua_store(swheader, frame + SDPCM_FRAMETAG_LEN);
+ htol32_ua_store(0, frame + SDPCM_FRAMETAG_LEN + sizeof(swheader));
+
+ if (!DATAOK(bus)) {
+ DHD_INFO(("%s: No bus credit bus->tx_max %d, bus->tx_seq %d\n",
+ __FUNCTION__, bus->tx_max, bus->tx_seq));
+ bus->ctrl_frame_stat = TRUE;
+ /* Send from dpc */
+ bus->ctrl_frame_buf = frame;
+ bus->ctrl_frame_len = len;
+
+ dhd_wait_for_event(bus->dhd, &bus->ctrl_frame_stat);
+
+ if (bus->ctrl_frame_stat == FALSE) {
+ DHD_INFO(("%s: ctrl_frame_stat == FALSE\n", __FUNCTION__));
+ ret = 0;
+ } else {
+ DHD_INFO(("%s: ctrl_frame_stat == TRUE\n", __FUNCTION__));
+ ret = -1;
+ }
+ }
+
+ if (ret == -1) {
+#ifdef DHD_DEBUG
+ if (DHD_BYTES_ON() && DHD_CTL_ON()) {
+ prhex("Tx Frame", frame, len);
+ } else if (DHD_HDRS_ON()) {
+ prhex("TxHdr", frame, MIN(len, 16));
+ }
+#endif
+
+ do {
+ bus->ctrl_frame_stat = FALSE;
+ ret = dhd_bcmsdh_send_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC,
+ frame, len, NULL, NULL, NULL);
+ ASSERT(ret != BCME_PENDING);
+
+ if (ret < 0) {
+ /* On failure, abort the command and terminate the frame */
+ DHD_INFO(("%s: sdio error %d, abort command and terminate frame.\n",
+ __FUNCTION__, ret));
+ bus->tx_sderrs++;
+
+ bcmsdh_abort(sdh, SDIO_FUNC_2);
+
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_FRAMECTRL,
+ SFC_WF_TERM, NULL);
+ bus->f1regdata++;
+
+ for (i = 0; i < 3; i++) {
+ uint8 hi, lo;
+ hi = bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
+ SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+ lo = bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
+ SBSDIO_FUNC1_WFRAMEBCLO, NULL);
+ bus->f1regdata += 2;
+ if ((hi == 0) && (lo == 0))
+ break;
+ }
+
+ }
+ if (ret == 0) {
+ bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
+ }
+ } while ((ret < 0) && retries++ < TXRETRIES);
+ }
+
+ if ((bus->idletime == DHD_IDLE_IMMEDIATE) && !bus->dpc_sched) {
+ bus->activity = FALSE;
+ dhdsdio_clkctl(bus, CLK_NONE, TRUE);
+ }
+
+ dhd_os_sdunlock(bus->dhd);
+
+ if (ret)
+ bus->dhd->tx_ctlerrs++;
+ else
+ bus->dhd->tx_ctlpkts++;
+
+ return ret ? -EIO : 0;
+}
+
+int
+dhd_bus_rxctl(struct dhd_bus *bus, uchar *msg, uint msglen)
+{
+ int timeleft;
+ uint rxlen = 0;
+ bool pending;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (bus->dhd->dongle_reset)
+ return -EIO;
+
+ /* Wait until control frame is available */
+ timeleft = dhd_os_ioctl_resp_wait(bus->dhd, &bus->rxlen, &pending);
+
+ dhd_os_sdlock(bus->dhd);
+ rxlen = bus->rxlen;
+ bcopy(bus->rxctl, msg, MIN(msglen, rxlen));
+ bus->rxlen = 0;
+ dhd_os_sdunlock(bus->dhd);
+
+ if (rxlen) {
+ DHD_CTL(("%s: resumed on rxctl frame, got %d expected %d\n",
+ __FUNCTION__, rxlen, msglen));
+ } else if (timeleft == 0) {
+ DHD_ERROR(("%s: resumed on timeout\n", __FUNCTION__));
+#ifdef DHD_DEBUG_TRAP
+ dhd_os_sdlock(bus->dhd);
+ dhdsdio_checkdied(bus, NULL, 0);
+ dhd_os_sdunlock(bus->dhd);
+#endif /* DHD_DEBUG_TRAP */
+ } else if (pending == TRUE) {
+ DHD_CTL(("%s: cancelled\n", __FUNCTION__));
+ return -ERESTARTSYS;
+ } else {
+ DHD_CTL(("%s: resumed for unknown reason?\n", __FUNCTION__));
+#ifdef DHD_DEBUG_TRAP
+ dhd_os_sdlock(bus->dhd);
+ dhdsdio_checkdied(bus, NULL, 0);
+ dhd_os_sdunlock(bus->dhd);
+#endif /* DHD_DEBUG_TRAP */
+ }
+
+ if (rxlen)
+ bus->dhd->rx_ctlpkts++;
+ else
+ bus->dhd->rx_ctlerrs++;
+
+ return rxlen ? (int)rxlen : -ETIMEDOUT;
+}
+
+/* IOVar table */
+enum {
+ IOV_INTR = 1,
+ IOV_POLLRATE,
+ IOV_SDREG,
+ IOV_SBREG,
+ IOV_SDCIS,
+ IOV_MEMBYTES,
+ IOV_MEMSIZE,
+#ifdef DHD_DEBUG_TRAP
+ IOV_CHECKDIED,
+#endif
+ IOV_DOWNLOAD,
+ IOV_FORCEEVEN,
+ IOV_SDIOD_DRIVE,
+ IOV_READAHEAD,
+ IOV_SDRXCHAIN,
+ IOV_ALIGNCTL,
+ IOV_SDALIGN,
+ IOV_DEVRESET,
+ IOV_CPU,
+#ifdef SDTEST
+ IOV_PKTGEN,
+ IOV_EXTLOOP,
+#endif /* SDTEST */
+ IOV_SPROM,
+ IOV_TXBOUND,
+ IOV_RXBOUND,
+ IOV_TXMINMAX,
+ IOV_IDLETIME,
+ IOV_IDLECLOCK,
+ IOV_SD1IDLE,
+ IOV_SLEEP,
+ IOV_VARS
+};
+
+const bcm_iovar_t dhdsdio_iovars[] = {
+ {"intr", IOV_INTR, 0, IOVT_BOOL, 0 },
+ {"sleep", IOV_SLEEP, 0, IOVT_BOOL, 0 },
+ {"pollrate", IOV_POLLRATE, 0, IOVT_UINT32, 0 },
+ {"idletime", IOV_IDLETIME, 0, IOVT_INT32, 0 },
+ {"idleclock", IOV_IDLECLOCK, 0, IOVT_INT32, 0 },
+ {"sd1idle", IOV_SD1IDLE, 0, IOVT_BOOL, 0 },
+ {"membytes", IOV_MEMBYTES, 0, IOVT_BUFFER, 2 * sizeof(int) },
+ {"memsize", IOV_MEMSIZE, 0, IOVT_UINT32, 0 },
+ {"download", IOV_DOWNLOAD, 0, IOVT_BOOL, 0 },
+ {"vars", IOV_VARS, 0, IOVT_BUFFER, 0 },
+ {"sdiod_drive", IOV_SDIOD_DRIVE, 0, IOVT_UINT32, 0 },
+ {"readahead", IOV_READAHEAD, 0, IOVT_BOOL, 0 },
+ {"sdrxchain", IOV_SDRXCHAIN, 0, IOVT_BOOL, 0 },
+ {"alignctl", IOV_ALIGNCTL, 0, IOVT_BOOL, 0 },
+ {"sdalign", IOV_SDALIGN, 0, IOVT_BOOL, 0 },
+ {"devreset", IOV_DEVRESET, 0, IOVT_BOOL, 0 },
+#ifdef DHD_DEBUG
+ {"sdreg", IOV_SDREG, 0, IOVT_BUFFER, sizeof(sdreg_t) },
+ {"sbreg", IOV_SBREG, 0, IOVT_BUFFER, sizeof(sdreg_t) },
+ {"sd_cis", IOV_SDCIS, 0, IOVT_BUFFER, DHD_IOCTL_MAXLEN },
+ {"forcealign", IOV_FORCEEVEN, 0, IOVT_BOOL, 0 },
+ {"txbound", IOV_TXBOUND, 0, IOVT_UINT32, 0 },
+ {"rxbound", IOV_RXBOUND, 0, IOVT_UINT32, 0 },
+ {"txminmax", IOV_TXMINMAX, 0, IOVT_UINT32, 0 },
+ {"cpu", IOV_CPU, 0, IOVT_BOOL, 0 },
+#endif /* DHD_DEBUG */
+#ifdef DHD_DEBUG_TRAP
+ {"checkdied", IOV_CHECKDIED, 0, IOVT_BUFFER, 0 },
+#endif /* DHD_DEBUG_TRAP */
+#ifdef SDTEST
+ {"extloop", IOV_EXTLOOP, 0, IOVT_BOOL, 0 },
+ {"pktgen", IOV_PKTGEN, 0, IOVT_BUFFER, sizeof(dhd_pktgen_t) },
+#endif /* SDTEST */
+
+ {NULL, 0, 0, 0, 0 }
+};
+
+static void
+dhd_dump_pct(struct bcmstrbuf *strbuf, char *desc, uint num, uint div)
+{
+ uint q1, q2;
+
+ if (!div) {
+ bcm_bprintf(strbuf, "%s N/A", desc);
+ } else {
+ q1 = num / div;
+ q2 = (100 * (num - (q1 * div))) / div;
+ bcm_bprintf(strbuf, "%s %d.%02d", desc, q1, q2);
+ }
+}
+
+void
+dhd_bus_dump(dhd_pub_t *dhdp, struct bcmstrbuf *strbuf)
+{
+ dhd_bus_t *bus = dhdp->bus;
+
+ bcm_bprintf(strbuf, "Bus SDIO structure:\n");
+ bcm_bprintf(strbuf, "hostintmask 0x%08x intstatus 0x%08x sdpcm_ver %d\n",
+ bus->hostintmask, bus->intstatus, bus->sdpcm_ver);
+ bcm_bprintf(strbuf, "fcstate %d qlen %d tx_seq %d, max %d, rxskip %d rxlen %d rx_seq %d\n",
+ bus->fcstate, pktq_len(&bus->txq), bus->tx_seq, bus->tx_max, bus->rxskip,
+ bus->rxlen, bus->rx_seq);
+ bcm_bprintf(strbuf, "intr %d intrcount %d lastintrs %d spurious %d\n",
+ bus->intr, bus->intrcount, bus->lastintrs, bus->spurious);
+ bcm_bprintf(strbuf, "pollrate %d pollcnt %d regfails %d\n",
+ bus->pollrate, bus->pollcnt, bus->regfails);
+
+ bcm_bprintf(strbuf, "\nAdditional counters:\n");
+ bcm_bprintf(strbuf, "tx_sderrs %d fcqueued %d rxrtx %d rx_toolong %d rxc_errors %d\n",
+ bus->tx_sderrs, bus->fcqueued, bus->rxrtx, bus->rx_toolong,
+ bus->rxc_errors);
+ bcm_bprintf(strbuf, "rx_hdrfail %d badhdr %d badseq %d\n",
+ bus->rx_hdrfail, bus->rx_badhdr, bus->rx_badseq);
+ bcm_bprintf(strbuf, "fc_rcvd %d, fc_xoff %d, fc_xon %d\n",
+ bus->fc_rcvd, bus->fc_xoff, bus->fc_xon);
+ bcm_bprintf(strbuf, "rxglomfail %d, rxglomframes %d, rxglompkts %d\n",
+ bus->rxglomfail, bus->rxglomframes, bus->rxglompkts);
+ bcm_bprintf(strbuf, "f2rx (hdrs/data) %d (%d/%d), f2tx %d f1regs %d\n",
+ (bus->f2rxhdrs + bus->f2rxdata), bus->f2rxhdrs, bus->f2rxdata,
+ bus->f2txdata, bus->f1regdata);
+ {
+ dhd_dump_pct(strbuf, "\nRx: pkts/f2rd", bus->dhd->rx_packets,
+ (bus->f2rxhdrs + bus->f2rxdata));
+ dhd_dump_pct(strbuf, ", pkts/f1sd", bus->dhd->rx_packets, bus->f1regdata);
+ dhd_dump_pct(strbuf, ", pkts/sd", bus->dhd->rx_packets,
+ (bus->f2rxhdrs + bus->f2rxdata + bus->f1regdata));
+ dhd_dump_pct(strbuf, ", pkts/int", bus->dhd->rx_packets, bus->intrcount);
+ bcm_bprintf(strbuf, "\n");
+
+ dhd_dump_pct(strbuf, "Rx: glom pct", (100 * bus->rxglompkts),
+ bus->dhd->rx_packets);
+ dhd_dump_pct(strbuf, ", pkts/glom", bus->rxglompkts, bus->rxglomframes);
+ bcm_bprintf(strbuf, "\n");
+
+ dhd_dump_pct(strbuf, "Tx: pkts/f2wr", bus->dhd->tx_packets, bus->f2txdata);
+ dhd_dump_pct(strbuf, ", pkts/f1sd", bus->dhd->tx_packets, bus->f1regdata);
+ dhd_dump_pct(strbuf, ", pkts/sd", bus->dhd->tx_packets,
+ (bus->f2txdata + bus->f1regdata));
+ dhd_dump_pct(strbuf, ", pkts/int", bus->dhd->tx_packets, bus->intrcount);
+ bcm_bprintf(strbuf, "\n");
+
+ dhd_dump_pct(strbuf, "Total: pkts/f2rw",
+ (bus->dhd->tx_packets + bus->dhd->rx_packets),
+ (bus->f2txdata + bus->f2rxhdrs + bus->f2rxdata));
+ dhd_dump_pct(strbuf, ", pkts/f1sd",
+ (bus->dhd->tx_packets + bus->dhd->rx_packets), bus->f1regdata);
+ dhd_dump_pct(strbuf, ", pkts/sd",
+ (bus->dhd->tx_packets + bus->dhd->rx_packets),
+ (bus->f2txdata + bus->f2rxhdrs + bus->f2rxdata + bus->f1regdata));
+ dhd_dump_pct(strbuf, ", pkts/int",
+ (bus->dhd->tx_packets + bus->dhd->rx_packets), bus->intrcount);
+ bcm_bprintf(strbuf, "\n\n");
+ }
+
+#ifdef SDTEST
+ if (bus->pktgen_count) {
+ bcm_bprintf(strbuf, "pktgen config and count:\n");
+ bcm_bprintf(strbuf, "freq %d count %d print %d total %d min %d len %d\n",
+ bus->pktgen_freq, bus->pktgen_count, bus->pktgen_print,
+ bus->pktgen_total, bus->pktgen_minlen, bus->pktgen_maxlen);
+ bcm_bprintf(strbuf, "send attempts %d rcvd %d fail %d\n",
+ bus->pktgen_sent, bus->pktgen_rcvd, bus->pktgen_fail);
+ }
+#endif /* SDTEST */
+#ifdef DHD_DEBUG
+ bcm_bprintf(strbuf, "dpc_sched %d host interrupt%spending\n",
+ bus->dpc_sched, (bcmsdh_intr_pending(bus->sdh) ? " " : " not "));
+ bcm_bprintf(strbuf, "blocksize %d roundup %d\n", bus->blocksize, bus->roundup);
+#endif /* DHD_DEBUG */
+ bcm_bprintf(strbuf, "clkstate %d activity %d idletime %d idlecount %d sleeping %d\n",
+ bus->clkstate, bus->activity, bus->idletime, bus->idlecount, bus->sleeping);
+}
+
+void
+dhd_bus_clearcounts(dhd_pub_t *dhdp)
+{
+ dhd_bus_t *bus = (dhd_bus_t *)dhdp->bus;
+
+ bus->intrcount = bus->lastintrs = bus->spurious = bus->regfails = 0;
+ bus->rxrtx = bus->rx_toolong = bus->rxc_errors = 0;
+ bus->rx_hdrfail = bus->rx_badhdr = bus->rx_badseq = 0;
+ bus->tx_sderrs = bus->fc_rcvd = bus->fc_xoff = bus->fc_xon = 0;
+ bus->rxglomfail = bus->rxglomframes = bus->rxglompkts = 0;
+ bus->f2rxhdrs = bus->f2rxdata = bus->f2txdata = bus->f1regdata = 0;
+}
+
+#ifdef SDTEST
+static int
+dhdsdio_pktgen_get(dhd_bus_t *bus, uint8 *arg)
+{
+ dhd_pktgen_t pktgen;
+
+ pktgen.version = DHD_PKTGEN_VERSION;
+ pktgen.freq = bus->pktgen_freq;
+ pktgen.count = bus->pktgen_count;
+ pktgen.print = bus->pktgen_print;
+ pktgen.total = bus->pktgen_total;
+ pktgen.minlen = bus->pktgen_minlen;
+ pktgen.maxlen = bus->pktgen_maxlen;
+ pktgen.numsent = bus->pktgen_sent;
+ pktgen.numrcvd = bus->pktgen_rcvd;
+ pktgen.numfail = bus->pktgen_fail;
+ pktgen.mode = bus->pktgen_mode;
+ pktgen.stop = bus->pktgen_stop;
+
+ bcopy(&pktgen, arg, sizeof(pktgen));
+
+ return 0;
+}
+
+static int
+dhdsdio_pktgen_set(dhd_bus_t *bus, uint8 *arg)
+{
+ dhd_pktgen_t pktgen;
+ uint oldcnt, oldmode;
+
+ bcopy(arg, &pktgen, sizeof(pktgen));
+ if (pktgen.version != DHD_PKTGEN_VERSION)
+ return BCME_BADARG;
+
+ oldcnt = bus->pktgen_count;
+ oldmode = bus->pktgen_mode;
+
+ bus->pktgen_freq = pktgen.freq;
+ bus->pktgen_count = pktgen.count;
+ bus->pktgen_print = pktgen.print;
+ bus->pktgen_total = pktgen.total;
+ bus->pktgen_minlen = pktgen.minlen;
+ bus->pktgen_maxlen = pktgen.maxlen;
+ bus->pktgen_mode = pktgen.mode;
+ bus->pktgen_stop = pktgen.stop;
+
+ bus->pktgen_tick = bus->pktgen_ptick = 0;
+ bus->pktgen_len = MAX(bus->pktgen_len, bus->pktgen_minlen);
+ bus->pktgen_len = MIN(bus->pktgen_len, bus->pktgen_maxlen);
+
+ /* Clear counts for a new pktgen (mode change, or was stopped) */
+ if (bus->pktgen_count && (!oldcnt || oldmode != bus->pktgen_mode))
+ bus->pktgen_sent = bus->pktgen_rcvd = bus->pktgen_fail = 0;
+
+ return 0;
+}
+#endif /* SDTEST */
+
+static int
+dhdsdio_membytes(dhd_bus_t *bus, bool write, uint32 address, uint8 *data, uint size)
+{
+ int bcmerror = 0;
+ uint32 sdaddr;
+ uint dsize;
+
+ /* Determine initial transfer parameters */
+ sdaddr = address & SBSDIO_SB_OFT_ADDR_MASK;
+ if ((sdaddr + size) & SBSDIO_SBWINDOW_MASK)
+ dsize = (SBSDIO_SB_OFT_ADDR_LIMIT - sdaddr);
+ else
+ dsize = size;
+
+ /* Set the backplane window to include the start address */
+ if ((bcmerror = dhdsdio_set_siaddr_window(bus, address))) {
+ DHD_ERROR(("%s: window change failed\n", __FUNCTION__));
+ goto xfer_done;
+ }
+
+ /* Do the transfer(s) */
+ while (size) {
+ DHD_INFO(("%s: %s %d bytes at offset 0x%08x in window 0x%08x\n",
+ __FUNCTION__, (write ? "write" : "read"), dsize, sdaddr,
+ (address & SBSDIO_SBWINDOW_MASK)));
+ if ((bcmerror = bcmsdh_rwdata(bus->sdh, write, sdaddr, data, dsize))) {
+ DHD_ERROR(("%s: membytes transfer failed\n", __FUNCTION__));
+ break;
+ }
+
+ /* Adjust for next transfer (if any) */
+ if ((size -= dsize)) {
+ data += dsize;
+ address += dsize;
+ if ((bcmerror = dhdsdio_set_siaddr_window(bus, address))) {
+ DHD_ERROR(("%s: window change failed\n", __FUNCTION__));
+ break;
+ }
+ sdaddr = 0;
+ dsize = MIN(SBSDIO_SB_OFT_ADDR_LIMIT, size);
+ }
+ }
+
+xfer_done:
+ /* Return the window to backplane enumeration space for core access */
+ if (dhdsdio_set_siaddr_window(bus, bcmsdh_cur_sbwad(bus->sdh))) {
+ DHD_ERROR(("%s: FAILED to set window back to 0x%x\n", __FUNCTION__,
+ bcmsdh_cur_sbwad(bus->sdh)));
+ }
+
+ return bcmerror;
+}
+
+#ifdef DHD_DEBUG_TRAP
+static int
+dhdsdio_readshared(dhd_bus_t *bus, sdpcm_shared_t *sh)
+{
+ uint32 addr;
+ int rv;
+
+ /* Read last word in memory to determine address of sdpcm_shared structure */
+ if ((rv = dhdsdio_membytes(bus, FALSE, bus->ramsize - 4, (uint8 *)&addr, 4)) < 0)
+ return rv;
+
+ addr = ltoh32(addr);
+
+ DHD_INFO(("sdpcm_shared address 0x%08X\n", addr));
+
+ /*
+ * Check if addr is valid.
+ * NVRAM length at the end of memory should have been overwritten.
+ */
+ if (addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff)) {
+ DHD_ERROR(("%s: address (0x%08x) of sdpcm_shared invalid\n", __FUNCTION__, addr));
+ return BCME_ERROR;
+ }
+
+ /* Read hndrte_shared structure */
+ if ((rv = dhdsdio_membytes(bus, FALSE, addr, (uint8 *)sh, sizeof(sdpcm_shared_t))) < 0)
+ return rv;
+
+ /* Endianness */
+ sh->flags = ltoh32(sh->flags);
+ sh->trap_addr = ltoh32(sh->trap_addr);
+ sh->assert_exp_addr = ltoh32(sh->assert_exp_addr);
+ sh->assert_file_addr = ltoh32(sh->assert_file_addr);
+ sh->assert_line = ltoh32(sh->assert_line);
+ sh->console_addr = ltoh32(sh->console_addr);
+ sh->msgtrace_addr = ltoh32(sh->msgtrace_addr);
+
+ if ((sh->flags & SDPCM_SHARED_VERSION_MASK) != SDPCM_SHARED_VERSION) {
+ DHD_ERROR(("%s: sdpcm_shared version %d in dhd "
+ "is different than sdpcm_shared version %d in dongle\n",
+ __FUNCTION__, SDPCM_SHARED_VERSION,
+ sh->flags & SDPCM_SHARED_VERSION_MASK));
+ return BCME_ERROR;
+ }
+
+ return BCME_OK;
+}
+
+static int
+dhdsdio_checkdied(dhd_bus_t *bus, uint8 *data, uint size)
+{
+ int bcmerror = 0;
+ uint msize = 512;
+ char *mbuffer = NULL;
+ uint maxstrlen = 256;
+ char *str = NULL;
+ trap_t tr;
+ sdpcm_shared_t sdpcm_shared;
+ struct bcmstrbuf strbuf;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (data == NULL) {
+ /*
+ * Called after a rx ctrl timeout. "data" is NULL.
+ * allocate memory to trace the trap or assert.
+ */
+ size = msize;
+ mbuffer = data = MALLOC(bus->dhd->osh, msize);
+ if (mbuffer == NULL) {
+ DHD_ERROR(("%s: MALLOC(%d) failed \n", __FUNCTION__, msize));
+ bcmerror = BCME_NOMEM;
+ goto done;
+ }
+ }
+
+ if ((str = MALLOC(bus->dhd->osh, maxstrlen)) == NULL) {
+ DHD_ERROR(("%s: MALLOC(%d) failed \n", __FUNCTION__, maxstrlen));
+ bcmerror = BCME_NOMEM;
+ goto done;
+ }
+
+ if ((bcmerror = dhdsdio_readshared(bus, &sdpcm_shared)) < 0)
+ goto done;
+
+ bcm_binit(&strbuf, data, size);
+
+ bcm_bprintf(&strbuf, "msgtrace address : 0x%08X\nconsole address : 0x%08X\n",
+ sdpcm_shared.msgtrace_addr, sdpcm_shared.console_addr);
+
+ if ((sdpcm_shared.flags & SDPCM_SHARED_ASSERT_BUILT) == 0) {
+ /* NOTE: Misspelled assert is intentional - DO NOT FIX.
+ * (Avoids conflict with real asserts for programmatic parsing of output.)
+ */
+ bcm_bprintf(&strbuf, "Assrt not built in dongle\n");
+ }
+
+ if ((sdpcm_shared.flags & (SDPCM_SHARED_ASSERT|SDPCM_SHARED_TRAP)) == 0) {
+ /* NOTE: Misspelled assert is intentional - DO NOT FIX.
+ * (Avoids conflict with real asserts for programmatic parsing of output.)
+ */
+ bcm_bprintf(&strbuf, "No trap%s in dongle",
+ (sdpcm_shared.flags & SDPCM_SHARED_ASSERT_BUILT)
+ ?"/assrt" :"");
+ } else {
+ if (sdpcm_shared.flags & SDPCM_SHARED_ASSERT) {
+ /* Download assert */
+ bcm_bprintf(&strbuf, "Dongle assert");
+ if (sdpcm_shared.assert_exp_addr != 0) {
+ str[0] = '\0';
+ if ((bcmerror = dhdsdio_membytes(bus, FALSE,
+ sdpcm_shared.assert_exp_addr,
+ (uint8 *)str, maxstrlen)) < 0)
+ goto done;
+
+ str[maxstrlen - 1] = '\0';
+ bcm_bprintf(&strbuf, " expr \"%s\"", str);
+ }
+
+ if (sdpcm_shared.assert_file_addr != 0) {
+ str[0] = '\0';
+ if ((bcmerror = dhdsdio_membytes(bus, FALSE,
+ sdpcm_shared.assert_file_addr,
+ (uint8 *)str, maxstrlen)) < 0)
+ goto done;
+
+ str[maxstrlen - 1] = '\0';
+ bcm_bprintf(&strbuf, " file \"%s\"", str);
+ }
+
+ bcm_bprintf(&strbuf, " line %d ", sdpcm_shared.assert_line);
+ }
+
+ if (sdpcm_shared.flags & SDPCM_SHARED_TRAP) {
+ if ((bcmerror = dhdsdio_membytes(bus, FALSE,
+ sdpcm_shared.trap_addr,
+ (uint8*)&tr, sizeof(trap_t))) < 0)
+ goto done;
+
+ bcm_bprintf(&strbuf,
+ "Dongle trap type 0x%x @ epc 0x%x, cpsr 0x%x, spsr 0x%x, sp 0x%x,"
+ "lp 0x%x, rpc 0x%x Trap offset 0x%x, "
+ "r0 0x%x, r1 0x%x, r2 0x%x, r3 0x%x, r4 0x%x, r5 0x%x, r6 0x%x, r7 0x%x\n",
+ tr.type, tr.epc, tr.cpsr, tr.spsr, tr.r13, tr.r14, tr.pc,
+ sdpcm_shared.trap_addr,
+ tr.r0, tr.r1, tr.r2, tr.r3, tr.r4, tr.r5, tr.r6, tr.r7);
+ }
+ }
+
+ if (sdpcm_shared.flags & (SDPCM_SHARED_ASSERT | SDPCM_SHARED_TRAP)) {
+ DHD_ERROR(("%s: %s\n", __FUNCTION__, strbuf.origbuf));
+ }
+
+ if (sdpcm_shared.flags & SDPCM_SHARED_TRAP) {
+ /* Mem dump to a file on device */
+ dhdsdio_mem_dump(bus);
+ }
+
+done:
+ if (mbuffer)
+ MFREE(bus->dhd->osh, mbuffer, msize);
+ if (str)
+ MFREE(bus->dhd->osh, str, maxstrlen);
+
+ return bcmerror;
+}
+
+static int
+dhdsdio_mem_dump(dhd_bus_t *bus)
+{
+ int ret = 0;
+ int size; /* Full mem size */
+ int start = 0; /* Start address */
+ int read_size = 0; /* Read size of each iteration */
+ uint8 *buf = NULL, *databuf = NULL;
+
+ /* Get full mem size */
+ size = bus->ramsize;
+ buf = MALLOC(bus->dhd->osh, size);
+ if (!buf) {
+ printf("%s: Out of memory (%d bytes)\n", __FUNCTION__, size);
+ return -1;
+ }
+
+ /* Read mem content */
+ printf("Dump dongle memory");
+ databuf = buf;
+ while (size)
+ {
+ read_size = MIN(MEMBLOCK, size);
+ if ((ret = dhdsdio_membytes(bus, FALSE, start, databuf, read_size)))
+ {
+ printf("%s: Error membytes %d\n", __FUNCTION__, ret);
+ if (buf) {
+ MFREE(bus->dhd->osh, buf, size);
+ }
+ return -1;
+ }
+ printf(".");
+
+ /* Decrement size and increment start address */
+ size -= read_size;
+ start += read_size;
+ databuf += read_size;
+ }
+ printf("Done\n");
+
+#ifdef DHD_DEBUG
+ /* free buf before return !!! */
+ if (write_to_file(bus->dhd, buf, bus->ramsize))
+ {
+ printf("%s: Error writing to files\n", __FUNCTION__);
+ return -1;
+ }
+ /* buf free handled in write_to_file, not here */
+#else
+ MFREE(bus->dhd->osh, buf, size);
+#endif
+ return 0;
+}
+#endif /* DHD_DEBUG_TRAP */
+
+#ifdef DHD_DEBUG
+#define CONSOLE_LINE_MAX 192
+
+static int
+dhdsdio_readconsole(dhd_bus_t *bus)
+{
+ dhd_console_t *c = &bus->console;
+ uint8 line[CONSOLE_LINE_MAX], ch;
+ uint32 n, idx, addr;
+ int rv;
+
+ /* Don't do anything until FWREADY updates console address */
+ if (bus->console_addr == 0)
+ return 0;
+
+ /* Read console log struct */
+ addr = bus->console_addr + OFFSETOF(hndrte_cons_t, log);
+ if ((rv = dhdsdio_membytes(bus, FALSE, addr, (uint8 *)&c->log, sizeof(c->log))) < 0)
+ return rv;
+
+ /* Allocate console buffer (one time only) */
+ if (c->buf == NULL) {
+ c->bufsize = ltoh32(c->log.buf_size);
+ if ((c->buf = MALLOC(bus->dhd->osh, c->bufsize)) == NULL)
+ return BCME_NOMEM;
+ }
+
+ idx = ltoh32(c->log.idx);
+
+ /* Protect against corrupt value */
+ if (idx > c->bufsize)
+ return BCME_ERROR;
+
+ /* Skip reading the console buffer if the index pointer has not moved */
+ if (idx == c->last)
+ return BCME_OK;
+
+ /* Read the console buffer */
+ addr = ltoh32(c->log.buf);
+ if ((rv = dhdsdio_membytes(bus, FALSE, addr, c->buf, c->bufsize)) < 0)
+ return rv;
+
+ while (c->last != idx) {
+ for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) {
+ if (c->last == idx) {
+ /* This would output a partial line. Instead, back up
+ * the buffer pointer and output this line next time around.
+ */
+ if (c->last >= n)
+ c->last -= n;
+ else
+ c->last = c->bufsize - n;
+ goto break2;
+ }
+ ch = c->buf[c->last];
+ c->last = (c->last + 1) % c->bufsize;
+ if (ch == '\n')
+ break;
+ line[n] = ch;
+ }
+
+ if (n > 0) {
+ if (line[n - 1] == '\r')
+ n--;
+ line[n] = 0;
+ printf("CONSOLE: %s\n", line);
+ }
+ }
+break2:
+
+ return BCME_OK;
+}
+#endif /* DHD_DEBUG */
+
+int
+dhdsdio_downloadvars(dhd_bus_t *bus, void *arg, int len)
+{
+ int bcmerror = BCME_OK;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ /* Basic sanity checks */
+ if (bus->dhd->up) {
+ bcmerror = BCME_NOTDOWN;
+ goto err;
+ }
+ if (!len) {
+ bcmerror = BCME_BUFTOOSHORT;
+ goto err;
+ }
+
+ /* Free the old ones and replace with passed variables */
+ if (bus->vars)
+ MFREE(bus->dhd->osh, bus->vars, bus->varsz);
+
+ bus->vars = MALLOC(bus->dhd->osh, len);
+ bus->varsz = bus->vars ? len : 0;
+ if (bus->vars == NULL) {
+ bcmerror = BCME_NOMEM;
+ goto err;
+ }
+
+ /* Copy the passed variables, which should include the terminating double-null */
+ bcopy(arg, bus->vars, bus->varsz);
+err:
+ return bcmerror;
+}
+
+static int
+dhdsdio_doiovar(dhd_bus_t *bus, const bcm_iovar_t *vi, uint32 actionid, const char *name,
+ void *params, int plen, void *arg, int len, int val_size)
+{
+ int bcmerror = 0;
+ int32 int_val = 0;
+ bool bool_val = 0;
+
+ DHD_TRACE(("%s: Enter, action %d name %s params %p plen %d arg %p len %d val_size %d\n",
+ __FUNCTION__, actionid, name, params, plen, arg, len, val_size));
+
+ if ((bcmerror = bcm_iovar_lencheck(vi, arg, len, IOV_ISSET(actionid))) != 0)
+ goto exit;
+
+ if (plen >= (int)sizeof(int_val))
+ bcopy(params, &int_val, sizeof(int_val));
+
+ bool_val = (int_val != 0) ? TRUE : FALSE;
+
+
+ /* Some ioctls use the bus */
+ dhd_os_sdlock(bus->dhd);
+
+ /* Check if dongle is in reset. If so, only allow DEVRESET iovars */
+ if (bus->dhd->dongle_reset && !(actionid == IOV_SVAL(IOV_DEVRESET) ||
+ actionid == IOV_GVAL(IOV_DEVRESET))) {
+ bcmerror = BCME_NOTREADY;
+ goto exit;
+ }
+
+ /* Handle sleep stuff before any clock mucking */
+ if (vi->varid == IOV_SLEEP) {
+ if (IOV_ISSET(actionid)) {
+ bcmerror = dhdsdio_bussleep(bus, bool_val);
+ } else {
+ int_val = (int32)bus->sleeping;
+ bcopy(&int_val, arg, val_size);
+ }
+ goto exit;
+ }
+
+ /* Request clock to allow SDIO accesses */
+ if (!bus->dhd->dongle_reset) {
+ BUS_WAKE(bus);
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+ }
+
+ switch (actionid) {
+ case IOV_GVAL(IOV_INTR):
+ int_val = (int32)bus->intr;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_INTR):
+ bus->intr = bool_val;
+ bus->intdis = FALSE;
+ if (bus->dhd->up) {
+ if (bus->intr) {
+ DHD_INTR(("%s: enable SDIO device interrupts\n", __FUNCTION__));
+ bcmsdh_intr_enable(bus->sdh);
+ } else {
+ DHD_INTR(("%s: disable SDIO interrupts\n", __FUNCTION__));
+ bcmsdh_intr_disable(bus->sdh);
+ }
+ }
+ break;
+
+ case IOV_GVAL(IOV_POLLRATE):
+ int_val = (int32)bus->pollrate;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_POLLRATE):
+ bus->pollrate = (uint)int_val;
+ bus->poll = (bus->pollrate != 0);
+ break;
+
+ case IOV_GVAL(IOV_IDLETIME):
+ int_val = bus->idletime;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_IDLETIME):
+ if ((int_val < 0) && (int_val != DHD_IDLE_IMMEDIATE)) {
+ bcmerror = BCME_BADARG;
+ } else {
+ bus->idletime = int_val;
+ }
+ break;
+
+ case IOV_GVAL(IOV_IDLECLOCK):
+ int_val = (int32)bus->idleclock;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_IDLECLOCK):
+ bus->idleclock = int_val;
+ break;
+
+ case IOV_GVAL(IOV_SD1IDLE):
+ int_val = (int32)sd1idle;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_SD1IDLE):
+ sd1idle = bool_val;
+ break;
+
+
+ case IOV_SVAL(IOV_MEMBYTES):
+ case IOV_GVAL(IOV_MEMBYTES):
+ {
+ uint32 address;
+ uint size, dsize;
+ uint8 *data;
+
+ bool set = (actionid == IOV_SVAL(IOV_MEMBYTES));
+
+ ASSERT(plen >= 2*sizeof(int));
+
+ address = (uint32)int_val;
+ bcopy((char *)params + sizeof(int_val), &int_val, sizeof(int_val));
+ size = (uint)int_val;
+
+ /* Do some validation */
+ dsize = set ? plen - (2 * sizeof(int)) : len;
+ if (dsize < size) {
+ DHD_ERROR(("%s: error on %s membytes, addr 0x%08x size %d dsize %d\n",
+ __FUNCTION__, (set ? "set" : "get"), address, size, dsize));
+ bcmerror = BCME_BADARG;
+ break;
+ }
+
+ DHD_INFO(("%s: Request to %s %d bytes at address 0x%08x\n", __FUNCTION__,
+ (set ? "write" : "read"), size, address));
+
+ /* If we know about SOCRAM, check for a fit */
+ if ((bus->orig_ramsize) &&
+ ((address > bus->orig_ramsize) || (address + size > bus->orig_ramsize))) {
+ DHD_ERROR(("%s: ramsize 0x%08x doesn't have %d bytes at 0x%08x\n",
+ __FUNCTION__, bus->orig_ramsize, size, address));
+ bcmerror = BCME_BADARG;
+ break;
+ }
+
+ /* Generate the actual data pointer */
+ data = set ? (uint8*)params + 2 * sizeof(int): (uint8*)arg;
+
+ /* Call to do the transfer */
+ bcmerror = dhdsdio_membytes(bus, set, address, data, size);
+
+ break;
+ }
+
+ case IOV_GVAL(IOV_MEMSIZE):
+ int_val = (int32)bus->ramsize;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_GVAL(IOV_SDIOD_DRIVE):
+ int_val = (int32)dhd_sdiod_drive_strength;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_SDIOD_DRIVE):
+ dhd_sdiod_drive_strength = int_val;
+ si_sdiod_drive_strength_init(bus->sih, bus->dhd->osh, dhd_sdiod_drive_strength);
+ break;
+
+ case IOV_SVAL(IOV_DOWNLOAD):
+ bcmerror = dhdsdio_download_state(bus, bool_val);
+ break;
+
+ case IOV_SVAL(IOV_VARS):
+ bcmerror = dhdsdio_downloadvars(bus, arg, len);
+ break;
+
+ case IOV_GVAL(IOV_READAHEAD):
+ int_val = (int32)dhd_readahead;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_READAHEAD):
+ if (bool_val && !dhd_readahead)
+ bus->nextlen = 0;
+ dhd_readahead = bool_val;
+ break;
+
+ case IOV_GVAL(IOV_SDRXCHAIN):
+ int_val = (int32)bus->use_rxchain;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_SDRXCHAIN):
+ if (bool_val && !bus->sd_rxchain)
+ bcmerror = BCME_UNSUPPORTED;
+ else
+ bus->use_rxchain = bool_val;
+ break;
+ case IOV_GVAL(IOV_ALIGNCTL):
+ int_val = (int32)dhd_alignctl;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_ALIGNCTL):
+ dhd_alignctl = bool_val;
+ break;
+
+ case IOV_GVAL(IOV_SDALIGN):
+ int_val = DHD_SDALIGN;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+#ifdef DHD_DEBUG
+ case IOV_GVAL(IOV_VARS):
+ if (bus->varsz < (uint)len)
+ bcopy(bus->vars, arg, bus->varsz);
+ else
+ bcmerror = BCME_BUFTOOSHORT;
+ break;
+#endif /* DHD_DEBUG */
+
+#ifdef DHD_DEBUG
+ case IOV_GVAL(IOV_SDREG):
+ {
+ sdreg_t *sd_ptr;
+ uint32 addr, size;
+
+ sd_ptr = (sdreg_t *)params;
+
+ addr = (uintptr)bus->regs + sd_ptr->offset;
+ size = sd_ptr->func;
+ int_val = (int32)bcmsdh_reg_read(bus->sdh, addr, size);
+ if (bcmsdh_regfail(bus->sdh))
+ bcmerror = BCME_SDIO_ERROR;
+ bcopy(&int_val, arg, sizeof(int32));
+ break;
+ }
+
+ case IOV_SVAL(IOV_SDREG):
+ {
+ sdreg_t *sd_ptr;
+ uint32 addr, size;
+
+ sd_ptr = (sdreg_t *)params;
+
+ addr = (uintptr)bus->regs + sd_ptr->offset;
+ size = sd_ptr->func;
+ bcmsdh_reg_write(bus->sdh, addr, size, sd_ptr->value);
+ if (bcmsdh_regfail(bus->sdh))
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+
+ /* Same as above, but offset is not backplane (not SDIO core) */
+ case IOV_GVAL(IOV_SBREG):
+ {
+ sdreg_t sdreg;
+ uint32 addr, size;
+
+ bcopy(params, &sdreg, sizeof(sdreg));
+
+ addr = SI_ENUM_BASE + sdreg.offset;
+ size = sdreg.func;
+ int_val = (int32)bcmsdh_reg_read(bus->sdh, addr, size);
+ if (bcmsdh_regfail(bus->sdh))
+ bcmerror = BCME_SDIO_ERROR;
+ bcopy(&int_val, arg, sizeof(int32));
+ break;
+ }
+
+ case IOV_SVAL(IOV_SBREG):
+ {
+ sdreg_t sdreg;
+ uint32 addr, size;
+
+ bcopy(params, &sdreg, sizeof(sdreg));
+
+ addr = SI_ENUM_BASE + sdreg.offset;
+ size = sdreg.func;
+ bcmsdh_reg_write(bus->sdh, addr, size, sdreg.value);
+ if (bcmsdh_regfail(bus->sdh))
+ bcmerror = BCME_SDIO_ERROR;
+ break;
+ }
+
+ case IOV_GVAL(IOV_SDCIS):
+ {
+ *(char *)arg = 0;
+
+ bcmstrcat(arg, "\nFunc 0\n");
+ bcmsdh_cis_read(bus->sdh, 0x10, (uint8 *)arg + strlen(arg), SBSDIO_CIS_SIZE_LIMIT);
+ bcmstrcat(arg, "\nFunc 1\n");
+ bcmsdh_cis_read(bus->sdh, 0x11, (uint8 *)arg + strlen(arg), SBSDIO_CIS_SIZE_LIMIT);
+ bcmstrcat(arg, "\nFunc 2\n");
+ bcmsdh_cis_read(bus->sdh, 0x12, (uint8 *)arg + strlen(arg), SBSDIO_CIS_SIZE_LIMIT);
+ break;
+ }
+
+ case IOV_GVAL(IOV_FORCEEVEN):
+ int_val = (int32)forcealign;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_FORCEEVEN):
+ forcealign = bool_val;
+ break;
+
+ case IOV_GVAL(IOV_TXBOUND):
+ int_val = (int32)dhd_txbound;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_TXBOUND):
+ dhd_txbound = (uint)int_val;
+ break;
+
+ case IOV_GVAL(IOV_RXBOUND):
+ int_val = (int32)dhd_rxbound;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_RXBOUND):
+ dhd_rxbound = (uint)int_val;
+ break;
+
+ case IOV_GVAL(IOV_TXMINMAX):
+ int_val = (int32)dhd_txminmax;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_TXMINMAX):
+ dhd_txminmax = (uint)int_val;
+ break;
+
+
+
+#endif /* DHD_DEBUG */
+
+
+#ifdef SDTEST
+ case IOV_GVAL(IOV_EXTLOOP):
+ int_val = (int32)bus->ext_loop;
+ bcopy(&int_val, arg, val_size);
+ break;
+
+ case IOV_SVAL(IOV_EXTLOOP):
+ bus->ext_loop = bool_val;
+ break;
+
+ case IOV_GVAL(IOV_PKTGEN):
+ bcmerror = dhdsdio_pktgen_get(bus, arg);
+ break;
+
+ case IOV_SVAL(IOV_PKTGEN):
+ bcmerror = dhdsdio_pktgen_set(bus, arg);
+ break;
+#endif /* SDTEST */
+
+
+ case IOV_SVAL(IOV_DEVRESET):
+ DHD_TRACE(("%s: Called set IOV_DEVRESET=%d dongle_reset=%d busstate=%d\n",
+ __FUNCTION__, bool_val, bus->dhd->dongle_reset,
+ bus->dhd->busstate));
+
+ ASSERT(bus->dhd->osh);
+ /* ASSERT(bus->cl_devid); */
+
+ dhd_bus_devreset(bus->dhd, (uint8)bool_val);
+
+ break;
+
+ case IOV_GVAL(IOV_DEVRESET):
+ DHD_TRACE(("%s: Called get IOV_DEVRESET\n", __FUNCTION__));
+
+ /* Get its status */
+ int_val = (bool) bus->dhd->dongle_reset;
+ bcopy(&int_val, arg, val_size);
+
+ break;
+
+ default:
+ bcmerror = BCME_UNSUPPORTED;
+ break;
+ }
+
+exit:
+ if ((bus->idletime == DHD_IDLE_IMMEDIATE) && !bus->dpc_sched) {
+ bus->activity = FALSE;
+ dhdsdio_clkctl(bus, CLK_NONE, TRUE);
+ }
+
+ dhd_os_sdunlock(bus->dhd);
+
+ if (actionid == IOV_SVAL(IOV_DEVRESET) && bool_val == FALSE)
+ dhd_preinit_ioctls((dhd_pub_t *) bus->dhd);
+
+ return bcmerror;
+}
+
+static int
+dhdsdio_write_vars(dhd_bus_t *bus)
+{
+ int bcmerror = 0;
+ uint32 varsize;
+ uint32 varaddr;
+ uint8 *vbuffer;
+ uint32 varsizew;
+#ifdef DHD_DEBUG
+ char *nvram_ularray;
+#endif /* DHD_DEBUG */
+
+ /* Even if there are no vars are to be written, we still need to set the ramsize. */
+ varsize = bus->varsz ? ROUNDUP(bus->varsz, 4) : 0;
+ varaddr = (bus->ramsize - 4) - varsize;
+
+ if (bus->vars) {
+ vbuffer = (uint8 *)MALLOC(bus->dhd->osh, varsize);
+ if (!vbuffer)
+ return BCME_NOMEM;
+
+ bzero(vbuffer, varsize);
+ bcopy(bus->vars, vbuffer, bus->varsz);
+
+ /* Write the vars list */
+ bcmerror = dhdsdio_membytes(bus, TRUE, varaddr, vbuffer, varsize);
+#ifdef DHD_DEBUG
+ /* Verify NVRAM bytes */
+ DHD_INFO(("Compare NVRAM dl & ul; varsize=%d\n", varsize));
+ nvram_ularray = (char*)MALLOC(bus->dhd->osh, varsize);
+ if (!nvram_ularray)
+ return BCME_NOMEM;
+
+ /* Upload image to verify downloaded contents. */
+ memset(nvram_ularray, 0xaa, varsize);
+
+ /* Read the vars list to temp buffer for comparison */
+ bcmerror = dhdsdio_membytes(bus, FALSE, varaddr, nvram_ularray, varsize);
+ if (bcmerror) {
+ DHD_ERROR(("%s: error %d on reading %d nvram bytes at 0x%08x\n",
+ __FUNCTION__, bcmerror, varsize, varaddr));
+ }
+ /* Compare the org NVRAM with the one read from RAM */
+ if (memcmp(vbuffer, nvram_ularray, varsize)) {
+ DHD_ERROR(("%s: Downloaded NVRAM image is corrupted.\n", __FUNCTION__));
+ } else
+ DHD_ERROR(("%s: Download, Upload and compare of NVRAM succeeded.\n",
+ __FUNCTION__));
+
+ MFREE(bus->dhd->osh, nvram_ularray, varsize);
+#endif /* DHD_DEBUG */
+
+ MFREE(bus->dhd->osh, vbuffer, varsize);
+ }
+
+ /* adjust to the user specified RAM */
+ DHD_INFO(("Physical memory size: %d, usable memory size: %d\n",
+ bus->orig_ramsize, bus->ramsize));
+ DHD_INFO(("Vars are at %d, orig varsize is %d\n",
+ varaddr, varsize));
+ varsize = ((bus->orig_ramsize - 4) - varaddr);
+
+ /*
+ * Determine the length token:
+ * Varsize, converted to words, in lower 16-bits, checksum in upper 16-bits.
+ */
+ if (bcmerror) {
+ varsizew = 0;
+ } else {
+ varsizew = varsize / 4;
+ varsizew = (~varsizew << 16) | (varsizew & 0x0000FFFF);
+ varsizew = htol32(varsizew);
+ }
+
+ DHD_INFO(("New varsize is %d, length token=0x%08x\n", varsize, varsizew));
+
+ /* Write the length token to the last word */
+ bcmerror = dhdsdio_membytes(bus, TRUE, (bus->orig_ramsize - 4),
+ (uint8*)&varsizew, 4);
+
+ return bcmerror;
+}
+
+static int
+dhdsdio_download_state(dhd_bus_t *bus, bool enter)
+{
+ uint retries;
+ int bcmerror = 0;
+
+ /* To enter download state, disable ARM and reset SOCRAM.
+ * To exit download state, simply reset ARM (default is RAM boot).
+ */
+ if (enter) {
+
+ bus->alp_only = TRUE;
+
+ if (!(si_setcore(bus->sih, ARM7S_CORE_ID, 0)) &&
+ !(si_setcore(bus->sih, ARMCM3_CORE_ID, 0))) {
+ DHD_ERROR(("%s: Failed to find ARM core!\n", __FUNCTION__));
+ bcmerror = BCME_ERROR;
+ goto fail;
+ }
+
+ si_core_disable(bus->sih, 0);
+ if (bcmsdh_regfail(bus->sdh)) {
+ bcmerror = BCME_SDIO_ERROR;
+ goto fail;
+ }
+
+ if (!(si_setcore(bus->sih, SOCRAM_CORE_ID, 0))) {
+ DHD_ERROR(("%s: Failed to find SOCRAM core!\n", __FUNCTION__));
+ bcmerror = BCME_ERROR;
+ goto fail;
+ }
+
+ si_core_reset(bus->sih, 0, 0);
+ if (bcmsdh_regfail(bus->sdh)) {
+ DHD_ERROR(("%s: Failure trying reset SOCRAM core?\n", __FUNCTION__));
+ bcmerror = BCME_SDIO_ERROR;
+ goto fail;
+ }
+
+ /* Clear the top bit of memory */
+ if (bus->ramsize) {
+ uint32 zeros = 0;
+ dhdsdio_membytes(bus, TRUE, bus->ramsize - 4, (uint8*)&zeros, 4);
+ }
+ } else {
+ if (!(si_setcore(bus->sih, SOCRAM_CORE_ID, 0))) {
+ DHD_ERROR(("%s: Failed to find SOCRAM core!\n", __FUNCTION__));
+ bcmerror = BCME_ERROR;
+ goto fail;
+ }
+
+ if (!si_iscoreup(bus->sih)) {
+ DHD_ERROR(("%s: SOCRAM core is down after reset?\n", __FUNCTION__));
+ bcmerror = BCME_ERROR;
+ goto fail;
+ }
+
+ if ((bcmerror = dhdsdio_write_vars(bus))) {
+ DHD_ERROR(("%s: no vars written to RAM\n", __FUNCTION__));
+ bcmerror = 0;
+ }
+
+ if (!si_setcore(bus->sih, PCMCIA_CORE_ID, 0) &&
+ !si_setcore(bus->sih, SDIOD_CORE_ID, 0)) {
+ DHD_ERROR(("%s: Can't change back to SDIO core?\n", __FUNCTION__));
+ bcmerror = BCME_ERROR;
+ goto fail;
+ }
+ W_SDREG(0xFFFFFFFF, &bus->regs->intstatus, retries);
+
+
+ if (!(si_setcore(bus->sih, ARM7S_CORE_ID, 0)) &&
+ !(si_setcore(bus->sih, ARMCM3_CORE_ID, 0))) {
+ DHD_ERROR(("%s: Failed to find ARM core!\n", __FUNCTION__));
+ bcmerror = BCME_ERROR;
+ goto fail;
+ }
+
+ si_core_reset(bus->sih, 0, 0);
+ if (bcmsdh_regfail(bus->sdh)) {
+ DHD_ERROR(("%s: Failure trying to reset ARM core?\n", __FUNCTION__));
+ bcmerror = BCME_SDIO_ERROR;
+ goto fail;
+ }
+
+ /* Allow HT Clock now that the ARM is running. */
+ bus->alp_only = FALSE;
+
+ bus->dhd->busstate = DHD_BUS_LOAD;
+ }
+
+fail:
+ /* Always return to SDIOD core */
+ if (!si_setcore(bus->sih, PCMCIA_CORE_ID, 0))
+ si_setcore(bus->sih, SDIOD_CORE_ID, 0);
+
+ return bcmerror;
+}
+
+int
+dhd_bus_iovar_op(dhd_pub_t *dhdp, const char *name,
+ void *params, int plen, void *arg, int len, bool set)
+{
+ dhd_bus_t *bus = dhdp->bus;
+ const bcm_iovar_t *vi = NULL;
+ int bcmerror = 0;
+ int val_size;
+ uint32 actionid;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ ASSERT(name);
+ ASSERT(len >= 0);
+
+ /* Get MUST have return space */
+ ASSERT(set || (arg && len));
+
+ /* Set does NOT take qualifiers */
+ ASSERT(!set || (!params && !plen));
+
+ /* Look up var locally; if not found pass to host driver */
+ if ((vi = bcm_iovar_lookup(dhdsdio_iovars, name)) == NULL) {
+ dhd_os_sdlock(bus->dhd);
+
+ BUS_WAKE(bus);
+
+ /* Turn on clock in case SD command needs backplane */
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+
+ bcmerror = bcmsdh_iovar_op(bus->sdh, name, params, plen, arg, len, set);
+
+ /* Check for bus configuration changes of interest */
+
+ /* If it was divisor change, read the new one */
+ if (set && strcmp(name, "sd_divisor") == 0) {
+ if (bcmsdh_iovar_op(bus->sdh, "sd_divisor", NULL, 0,
+ &bus->sd_divisor, sizeof(int32), FALSE) != BCME_OK) {
+ bus->sd_divisor = -1;
+ DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, name));
+ } else {
+ DHD_INFO(("%s: noted %s update, value now %d\n",
+ __FUNCTION__, name, bus->sd_divisor));
+ }
+ }
+ /* If it was a mode change, read the new one */
+ if (set && strcmp(name, "sd_mode") == 0) {
+ if (bcmsdh_iovar_op(bus->sdh, "sd_mode", NULL, 0,
+ &bus->sd_mode, sizeof(int32), FALSE) != BCME_OK) {
+ bus->sd_mode = -1;
+ DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, name));
+ } else {
+ DHD_INFO(("%s: noted %s update, value now %d\n",
+ __FUNCTION__, name, bus->sd_mode));
+ }
+ }
+ /* Similar check for blocksize change */
+ if (set && strcmp(name, "sd_blocksize") == 0) {
+ int32 fnum = 2;
+ if (bcmsdh_iovar_op(bus->sdh, "sd_blocksize", &fnum, sizeof(int32),
+ &bus->blocksize, sizeof(int32), FALSE) != BCME_OK) {
+ bus->blocksize = 0;
+ DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, "sd_blocksize"));
+ } else {
+ DHD_INFO(("%s: noted %s update, value now %d\n",
+ __FUNCTION__, "sd_blocksize", bus->blocksize));
+ }
+ }
+ bus->roundup = MIN(max_roundup, bus->blocksize);
+
+ if ((bus->idletime == DHD_IDLE_IMMEDIATE) && !bus->dpc_sched) {
+ bus->activity = FALSE;
+ dhdsdio_clkctl(bus, CLK_NONE, TRUE);
+ }
+
+ dhd_os_sdunlock(bus->dhd);
+ goto exit;
+ }
+
+ DHD_CTL(("%s: %s %s, len %d plen %d\n", __FUNCTION__,
+ name, (set ? "set" : "get"), len, plen));
+
+ /* set up 'params' pointer in case this is a set command so that
+ * the convenience int and bool code can be common to set and get
+ */
+ if (params == NULL) {
+ params = arg;
+ plen = len;
+ }
+
+ if (vi->type == IOVT_VOID)
+ val_size = 0;
+ else if (vi->type == IOVT_BUFFER)
+ val_size = len;
+ else
+ /* all other types are integer sized */
+ val_size = sizeof(int);
+
+ actionid = set ? IOV_SVAL(vi->varid) : IOV_GVAL(vi->varid);
+ bcmerror = dhdsdio_doiovar(bus, vi, actionid, name, params, plen, arg, len, val_size);
+
+exit:
+ return bcmerror;
+}
+
+void
+dhd_bus_stop(struct dhd_bus *bus, bool enforce_mutex)
+{
+ osl_t *osh = bus->dhd->osh;
+ uint32 local_hostintmask;
+ uint8 saveclk;
+ uint retries;
+ int err;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (enforce_mutex)
+ dhd_os_sdlock(bus->dhd);
+
+ BUS_WAKE(bus);
+
+ /* Change our idea of bus state */
+ bus->dhd->busstate = DHD_BUS_DOWN;
+
+ /* Enable clock for device interrupts */
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+
+ /* Disable and clear interrupts at the chip level also */
+ W_SDREG(0, &bus->regs->hostintmask, retries);
+ local_hostintmask = bus->hostintmask;
+ bus->hostintmask = 0;
+
+ /* Force clocks on backplane to be sure F2 interrupt propagates */
+ saveclk = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err);
+ if (!err) {
+ bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR,
+ (saveclk | SBSDIO_FORCE_HT), &err);
+ }
+ if (err) {
+ DHD_ERROR(("%s: Failed to force clock for F2: err %d\n", __FUNCTION__, err));
+ }
+
+ /* Turn off the bus (F2), free any pending packets */
+ DHD_INTR(("%s: disable SDIO interrupts\n", __FUNCTION__));
+ bcmsdh_intr_disable(bus->sdh);
+ bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, SDIO_FUNC_ENABLE_1, NULL);
+
+ /* Clear any pending interrupts now that F2 is disabled */
+ W_SDREG(local_hostintmask, &bus->regs->intstatus, retries);
+
+ /* Turn off the backplane clock (only) */
+ dhdsdio_clkctl(bus, CLK_SDONLY, FALSE);
+
+ /* Clear the data packet queues */
+ pktq_flush(osh, &bus->txq, TRUE);
+
+ /* Clear any held glomming stuff */
+ if (bus->glomd)
+ PKTFREE(osh, bus->glomd, FALSE);
+
+ if (bus->glom)
+ PKTFREE(osh, bus->glom, FALSE);
+
+ bus->glom = bus->glomd = NULL;
+
+ /* Clear rx control and wake any waiters */
+ bus->rxlen = 0;
+ dhd_os_ioctl_resp_wake(bus->dhd);
+
+ /* Reset some F2 state stuff */
+ bus->rxskip = FALSE;
+ bus->tx_seq = bus->rx_seq = 0;
+
+ if (enforce_mutex)
+ dhd_os_sdunlock(bus->dhd);
+}
+
+int
+dhd_bus_init(dhd_pub_t *dhdp, bool enforce_mutex)
+{
+ dhd_bus_t *bus = dhdp->bus;
+ dhd_timeout_t tmo;
+ uint retries = 0;
+ uint8 ready, enable;
+ int err, ret = BCME_ERROR;
+ uint8 saveclk;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ ASSERT(bus->dhd);
+ if (!bus->dhd)
+ return BCME_OK;
+
+ if (enforce_mutex)
+ dhd_os_sdlock(bus->dhd);
+
+ /* Make sure backplane clock is on, needed to generate F2 interrupt */
+ err = dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+ if ((err != BCME_OK) || (bus->clkstate != CLK_AVAIL)) {
+ DHD_ERROR(("%s: Failed to set backplane clock: err %d\n", __FUNCTION__, err));
+ goto exit;
+ }
+
+ /* Force clocks on backplane to be sure F2 interrupt propagates */
+ saveclk = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err);
+ if (!err) {
+ bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR,
+ (saveclk | SBSDIO_FORCE_HT), &err);
+ }
+ if (err) {
+ DHD_ERROR(("%s: Failed to force clock for F2: err %d\n", __FUNCTION__, err));
+ goto exit;
+ }
+
+ /* Enable function 2 (frame transfers) */
+ W_SDREG((SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT),
+ &bus->regs->tosbmailboxdata, retries);
+ enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2);
+
+ bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, enable, NULL);
+
+ /* Give the dongle some time to do its thing and set IOR2 */
+ dhd_timeout_start(&tmo, DHD_WAIT_F2RDY * 1000);
+
+ ready = 0;
+ while (ready != enable && !dhd_timeout_expired(&tmo))
+ ready = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IORDY, NULL);
+
+
+ DHD_INFO(("%s: enable 0x%02x, ready 0x%02x (waited %uus)\n",
+ __FUNCTION__, enable, ready, tmo.elapsed));
+
+
+ /* If F2 successfully enabled, set core and enable interrupts */
+ if (ready == enable) {
+ /* Make sure we're talking to the core. */
+ if (!(bus->regs = si_setcore(bus->sih, PCMCIA_CORE_ID, 0)))
+ bus->regs = si_setcore(bus->sih, SDIOD_CORE_ID, 0);
+
+ /* Set up the interrupt mask and enable interrupts */
+ bus->hostintmask = HOSTINTMASK;
+ W_SDREG(bus->hostintmask, &bus->regs->hostintmask, retries);
+
+ bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_WATERMARK, (uint8)watermark, &err);
+
+ /* Set bus state according to enable result */
+ dhdp->busstate = DHD_BUS_DATA;
+
+ /* bcmsdh_intr_unmask(bus->sdh); */
+
+ bus->intdis = FALSE;
+ if (bus->intr) {
+ DHD_INTR(("%s: enable SDIO device interrupts\n", __FUNCTION__));
+ bcmsdh_intr_enable(bus->sdh);
+ } else {
+ DHD_INTR(("%s: disable SDIO interrupts\n", __FUNCTION__));
+ bcmsdh_intr_disable(bus->sdh);
+ }
+
+ }
+
+
+ else {
+ /* Disable F2 again */
+ enable = SDIO_FUNC_ENABLE_1;
+ bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, enable, NULL);
+ }
+
+ /* Restore previous clock setting */
+ bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
+
+
+ /* If we didn't come up, turn off backplane clock */
+ if (dhdp->busstate != DHD_BUS_DATA)
+ dhdsdio_clkctl(bus, CLK_NONE, FALSE);
+
+ ret = BCME_OK;
+exit:
+ if (enforce_mutex)
+ dhd_os_sdunlock(bus->dhd);
+
+ return ret;
+}
+
+static void
+dhdsdio_rxfail(dhd_bus_t *bus, bool abort, bool rtx)
+{
+ bcmsdh_info_t *sdh = bus->sdh;
+ sdpcmd_regs_t *regs = bus->regs;
+ uint retries = 0;
+ uint16 lastrbc;
+ uint8 hi, lo;
+ int err;
+
+ DHD_ERROR(("%s: %sterminate frame%s\n", __FUNCTION__,
+ (abort ? "abort command, " : ""), (rtx ? ", send NAK" : "")));
+
+ if (abort) {
+ bcmsdh_abort(sdh, SDIO_FUNC_2);
+ }
+
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM, &err);
+ bus->f1regdata++;
+
+ /* Wait until the packet has been flushed (device/FIFO stable) */
+ for (lastrbc = retries = 0xffff; retries > 0; retries--) {
+ hi = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_RFRAMEBCHI, NULL);
+ lo = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_RFRAMEBCLO, NULL);
+ bus->f1regdata += 2;
+
+ if ((hi == 0) && (lo == 0))
+ break;
+
+ if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) {
+ DHD_ERROR(("%s: count growing: last 0x%04x now 0x%04x\n",
+ __FUNCTION__, lastrbc, ((hi << 8) + lo)));
+ }
+ lastrbc = (hi << 8) + lo;
+ }
+
+ if (!retries) {
+ DHD_ERROR(("%s: count never zeroed: last 0x%04x\n", __FUNCTION__, lastrbc));
+ } else {
+ DHD_INFO(("%s: flush took %d iterations\n", __FUNCTION__, (0xffff - retries)));
+ }
+
+ if (rtx) {
+ bus->rxrtx++;
+ W_SDREG(SMB_NAK, ®s->tosbmailbox, retries);
+ bus->f1regdata++;
+ if (retries <= retry_limit) {
+ bus->rxskip = TRUE;
+ }
+ }
+
+ /* Clear partial in any case */
+ bus->nextlen = 0;
+
+ /* If we can't reach the device, signal failure */
+ if (err || bcmsdh_regfail(sdh))
+ bus->dhd->busstate = DHD_BUS_DOWN;
+}
+
+static void
+dhdsdio_read_control(dhd_bus_t *bus, uint8 *hdr, uint len, uint doff)
+{
+ bcmsdh_info_t *sdh = bus->sdh;
+ uint rdlen, pad;
+
+ int sdret;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ /* Control data already received in aligned rxctl */
+ if ((bus->bus == SPI_BUS) && (!bus->usebufpool))
+ goto gotpkt;
+
+ ASSERT(bus->rxbuf);
+ /* Set rxctl for frame (w/optional alignment) */
+ bus->rxctl = bus->rxbuf;
+ if (dhd_alignctl) {
+ bus->rxctl += firstread;
+ if ((pad = ((uintptr)bus->rxctl % DHD_SDALIGN)))
+ bus->rxctl += (DHD_SDALIGN - pad);
+ bus->rxctl -= firstread;
+ }
+ ASSERT(bus->rxctl >= bus->rxbuf);
+
+ /* Copy the already-read portion over */
+ bcopy(hdr, bus->rxctl, firstread);
+ if (len <= firstread)
+ goto gotpkt;
+
+ /* Copy the full data pkt in gSPI case and process ioctl. */
+ if (bus->bus == SPI_BUS) {
+ bcopy(hdr, bus->rxctl, len);
+ goto gotpkt;
+ }
+
+ /* Raise rdlen to next SDIO block to avoid tail command */
+ rdlen = len - firstread;
+ if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
+ pad = bus->blocksize - (rdlen % bus->blocksize);
+ if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
+ ((len + pad) < bus->dhd->maxctl))
+ rdlen += pad;
+ } else if (rdlen % DHD_SDALIGN) {
+ rdlen += DHD_SDALIGN - (rdlen % DHD_SDALIGN);
+ }
+
+ /* Satisfy length-alignment requirements */
+ if (forcealign && (rdlen & (ALIGNMENT - 1)))
+ rdlen = ROUNDUP(rdlen, ALIGNMENT);
+
+ /* Drop if the read is too big or it exceeds our maximum */
+ if ((rdlen + firstread) > bus->dhd->maxctl) {
+ DHD_ERROR(("%s: %d-byte control read exceeds %d-byte buffer\n",
+ __FUNCTION__, rdlen, bus->dhd->maxctl));
+ bus->dhd->rx_errors++;
+ dhdsdio_rxfail(bus, FALSE, FALSE);
+ goto done;
+ }
+
+ if ((len - doff) > bus->dhd->maxctl) {
+ DHD_ERROR(("%s: %d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
+ __FUNCTION__, len, (len - doff), bus->dhd->maxctl));
+ bus->dhd->rx_errors++; bus->rx_toolong++;
+ dhdsdio_rxfail(bus, FALSE, FALSE);
+ goto done;
+ }
+
+
+ /* Read remainder of frame body into the rxctl buffer */
+ sdret = dhd_bcmsdh_recv_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC,
+ (bus->rxctl + firstread), rdlen, NULL, NULL, NULL);
+ bus->f2rxdata++;
+ ASSERT(sdret != BCME_PENDING);
+
+ /* Control frame failures need retransmission */
+ if (sdret < 0) {
+ DHD_ERROR(("%s: read %d control bytes failed: %d\n", __FUNCTION__, rdlen, sdret));
+ bus->rxc_errors++; /* dhd.rx_ctlerrs is higher level */
+ dhdsdio_rxfail(bus, TRUE, TRUE);
+ goto done;
+ }
+
+gotpkt:
+
+#ifdef DHD_DEBUG
+ if (DHD_BYTES_ON() && DHD_CTL_ON()) {
+ prhex("RxCtrl", bus->rxctl, len);
+ }
+#endif
+
+ /* Point to valid data and indicate its length */
+ bus->rxctl += doff;
+ bus->rxlen = len - doff;
+
+done:
+ /* Awake any waiters */
+ dhd_os_ioctl_resp_wake(bus->dhd);
+}
+
+static uint8
+dhdsdio_rxglom(dhd_bus_t *bus, uint8 rxseq)
+{
+ uint16 dlen, totlen;
+ uint8 *dptr, num = 0;
+
+ uint16 sublen, check;
+ void *pfirst, *plast, *pnext, *save_pfirst;
+ osl_t *osh = bus->dhd->osh;
+
+ int errcode;
+ uint8 chan, seq, doff, sfdoff;
+ uint8 txmax;
+
+ int ifidx = 0;
+ bool usechain = bus->use_rxchain;
+
+ /* If packets, issue read(s) and send up packet chain */
+ /* Return sequence numbers consumed? */
+
+ DHD_TRACE(("dhdsdio_rxglom: start: glomd %p glom %p\n", bus->glomd, bus->glom));
+
+ /* If there's a descriptor, generate the packet chain */
+ if (bus->glomd) {
+ dhd_os_sdlock_rxq(bus->dhd);
+
+ pfirst = plast = pnext = NULL;
+ dlen = (uint16)PKTLEN(osh, bus->glomd);
+ dptr = PKTDATA(osh, bus->glomd);
+ if (!dlen || (dlen & 1)) {
+ DHD_ERROR(("%s: bad glomd len (%d), ignore descriptor\n",
+ __FUNCTION__, dlen));
+ dlen = 0;
+ }
+
+ for (totlen = num = 0; dlen; num++) {
+ /* Get (and move past) next length */
+ sublen = ltoh16_ua(dptr);
+ dlen -= sizeof(uint16);
+ dptr += sizeof(uint16);
+ if ((sublen < SDPCM_HDRLEN) ||
+ ((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) {
+ DHD_ERROR(("%s: descriptor len %d bad: %d\n",
+ __FUNCTION__, num, sublen));
+ pnext = NULL;
+ break;
+ }
+ if (sublen % DHD_SDALIGN) {
+ DHD_ERROR(("%s: sublen %d not a multiple of %d\n",
+ __FUNCTION__, sublen, DHD_SDALIGN));
+ usechain = FALSE;
+ }
+ totlen += sublen;
+
+ /* For last frame, adjust read len so total is a block multiple */
+ if (!dlen) {
+ sublen += (ROUNDUP(totlen, bus->blocksize) - totlen);
+ totlen = ROUNDUP(totlen, bus->blocksize);
+ }
+
+ /* Allocate/chain packet for next subframe */
+ if ((pnext = PKTGET(osh, sublen + DHD_SDALIGN, FALSE)) == NULL) {
+ DHD_ERROR(("%s: PKTGET failed, num %d len %d\n",
+ __FUNCTION__, num, sublen));
+ break;
+ }
+ ASSERT(!PKTLINK(pnext));
+ if (!pfirst) {
+ ASSERT(!plast);
+ pfirst = plast = pnext;
+ } else {
+ ASSERT(plast);
+ PKTSETNEXT(osh, plast, pnext);
+ plast = pnext;
+ }
+
+ /* Adhere to start alignment requirements */
+ PKTALIGN(osh, pnext, sublen, DHD_SDALIGN);
+ }
+
+ /* If all allocations succeeded, save packet chain in bus structure */
+ if (pnext) {
+ DHD_GLOM(("%s: allocated %d-byte packet chain for %d subframes\n",
+ __FUNCTION__, totlen, num));
+ if (DHD_GLOM_ON() && bus->nextlen) {
+ if (totlen != bus->nextlen) {
+ DHD_GLOM(("%s: glomdesc mismatch: nextlen %d glomdesc %d "
+ "rxseq %d\n", __FUNCTION__, bus->nextlen,
+ totlen, rxseq));
+ }
+ }
+ bus->glom = pfirst;
+ pfirst = pnext = NULL;
+ } else {
+ if (pfirst)
+ PKTFREE(osh, pfirst, FALSE);
+ bus->glom = NULL;
+ num = 0;
+ }
+
+ /* Done with descriptor packet */
+ PKTFREE(osh, bus->glomd, FALSE);
+ bus->glomd = NULL;
+ bus->nextlen = 0;
+
+ dhd_os_sdunlock_rxq(bus->dhd);
+ }
+
+ /* Ok -- either we just generated a packet chain, or had one from before */
+ if (bus->glom) {
+ if (DHD_GLOM_ON()) {
+ DHD_GLOM(("%s: attempt superframe read, packet chain:\n", __FUNCTION__));
+ for (pnext = bus->glom; pnext; pnext = PKTNEXT(osh, pnext)) {
+ DHD_GLOM((" %p: %p len 0x%04x (%d)\n",
+ pnext, (uint8*)PKTDATA(osh, pnext),
+ PKTLEN(osh, pnext), PKTLEN(osh, pnext)));
+ }
+ }
+
+ pfirst = bus->glom;
+ dlen = (uint16)pkttotlen(osh, pfirst);
+
+ /* Do an SDIO read for the superframe. Configurable iovar to
+ * read directly into the chained packet, or allocate a large
+ * packet and and copy into the chain.
+ */
+ if (usechain) {
+ errcode = dhd_bcmsdh_recv_buf(bus,
+ bcmsdh_cur_sbwad(bus->sdh), SDIO_FUNC_2,
+ F2SYNC, (uint8*)PKTDATA(osh, pfirst),
+ dlen, pfirst, NULL, NULL);
+ } else if (bus->dataptr) {
+ errcode = dhd_bcmsdh_recv_buf(bus,
+ bcmsdh_cur_sbwad(bus->sdh), SDIO_FUNC_2,
+ F2SYNC, bus->dataptr,
+ dlen, NULL, NULL, NULL);
+ sublen = (uint16)pktfrombuf(osh, pfirst, 0, dlen, bus->dataptr);
+ if (sublen != dlen) {
+ DHD_ERROR(("%s: FAILED TO COPY, dlen %d sublen %d\n",
+ __FUNCTION__, dlen, sublen));
+ errcode = -1;
+ }
+ pnext = NULL;
+ } else {
+ DHD_ERROR(("COULDN'T ALLOC %d-BYTE GLOM, FORCE FAILURE\n", dlen));
+ errcode = -1;
+ }
+ bus->f2rxdata++;
+ ASSERT(errcode != BCME_PENDING);
+
+ /* On failure, kill the superframe, allow a couple retries */
+ if (errcode < 0) {
+ DHD_ERROR(("%s: glom read of %d bytes failed: %d\n",
+ __FUNCTION__, dlen, errcode));
+ bus->dhd->rx_errors++;
+
+ if (bus->glomerr++ < 3) {
+ dhdsdio_rxfail(bus, TRUE, TRUE);
+ } else {
+ bus->glomerr = 0;
+ dhdsdio_rxfail(bus, TRUE, FALSE);
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE(osh, bus->glom, FALSE);
+ dhd_os_sdunlock_rxq(bus->dhd);
+ bus->rxglomfail++;
+ bus->glom = NULL;
+ }
+ return 0;
+ }
+
+#ifdef DHD_DEBUG
+ if (DHD_GLOM_ON()) {
+ prhex("SUPERFRAME", PKTDATA(osh, pfirst),
+ MIN(PKTLEN(osh, pfirst), 48));
+ }
+#endif
+
+
+ /* Validate the superframe header */
+ dptr = (uint8 *)PKTDATA(osh, pfirst);
+ sublen = ltoh16_ua(dptr);
+ check = ltoh16_ua(dptr + sizeof(uint16));
+
+ chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
+ seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]);
+ bus->nextlen = dptr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
+ if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
+ DHD_INFO(("%s: got frame w/nextlen too large (%d) seq %d\n",
+ __FUNCTION__, bus->nextlen, seq));
+ bus->nextlen = 0;
+ }
+ doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
+ txmax = SDPCM_WINDOW_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
+
+ errcode = 0;
+ if ((uint16)~(sublen^check)) {
+ DHD_ERROR(("%s (superframe): HW hdr error: len/check 0x%04x/0x%04x\n",
+ __FUNCTION__, sublen, check));
+ errcode = -1;
+ } else if (ROUNDUP(sublen, bus->blocksize) != dlen) {
+ DHD_ERROR(("%s (superframe): len 0x%04x, rounded 0x%04x, expect 0x%04x\n",
+ __FUNCTION__, sublen, ROUNDUP(sublen, bus->blocksize), dlen));
+ errcode = -1;
+ } else if (SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]) != SDPCM_GLOM_CHANNEL) {
+ DHD_ERROR(("%s (superframe): bad channel %d\n", __FUNCTION__,
+ SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN])));
+ errcode = -1;
+ } else if (SDPCM_GLOMDESC(&dptr[SDPCM_FRAMETAG_LEN])) {
+ DHD_ERROR(("%s (superframe): got second descriptor?\n", __FUNCTION__));
+ errcode = -1;
+ } else if ((doff < SDPCM_HDRLEN) ||
+ (doff > (PKTLEN(osh, pfirst) - SDPCM_HDRLEN))) {
+ DHD_ERROR(("%s (superframe): Bad data offset %d: HW %d pkt %d min %d\n",
+ __FUNCTION__, doff, sublen, PKTLEN(osh, pfirst), SDPCM_HDRLEN));
+ errcode = -1;
+ }
+
+ /* Check sequence number of superframe SW header */
+ if (rxseq != seq) {
+ DHD_INFO(("%s: (superframe) rx_seq %d, expected %d\n",
+ __FUNCTION__, seq, rxseq));
+ bus->rx_badseq++;
+ rxseq = seq;
+ }
+
+ /* Check window for sanity */
+ if ((uint8)(txmax - bus->tx_seq) > 0x40) {
+ DHD_ERROR(("%s: got unlikely tx max %d with tx_seq %d\n",
+ __FUNCTION__, txmax, bus->tx_seq));
+ txmax = bus->tx_seq + 2;
+ }
+ bus->tx_max = txmax;
+
+ /* Remove superframe header, remember offset */
+ PKTPULL(osh, pfirst, doff);
+ sfdoff = doff;
+
+ /* Validate all the subframe headers */
+ for (num = 0, pnext = pfirst; pnext && !errcode;
+ num++, pnext = PKTNEXT(osh, pnext)) {
+ dptr = (uint8 *)PKTDATA(osh, pnext);
+ dlen = (uint16)PKTLEN(osh, pnext);
+ sublen = ltoh16_ua(dptr);
+ check = ltoh16_ua(dptr + sizeof(uint16));
+ chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
+ doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
+#ifdef DHD_DEBUG
+ if (DHD_GLOM_ON()) {
+ prhex("subframe", dptr, 32);
+ }
+#endif
+
+ if ((uint16)~(sublen^check)) {
+ DHD_ERROR(("%s (subframe %d): HW hdr error: "
+ "len/check 0x%04x/0x%04x\n",
+ __FUNCTION__, num, sublen, check));
+ errcode = -1;
+ } else if ((sublen > dlen) || (sublen < SDPCM_HDRLEN)) {
+ DHD_ERROR(("%s (subframe %d): length mismatch: "
+ "len 0x%04x, expect 0x%04x\n",
+ __FUNCTION__, num, sublen, dlen));
+ errcode = -1;
+ } else if ((chan != SDPCM_DATA_CHANNEL) &&
+ (chan != SDPCM_EVENT_CHANNEL)) {
+ DHD_ERROR(("%s (subframe %d): bad channel %d\n",
+ __FUNCTION__, num, chan));
+ errcode = -1;
+ } else if ((doff < SDPCM_HDRLEN) || (doff > sublen)) {
+ DHD_ERROR(("%s (subframe %d): Bad data offset %d: HW %d min %d\n",
+ __FUNCTION__, num, doff, sublen, SDPCM_HDRLEN));
+ errcode = -1;
+ }
+ }
+
+ if (errcode) {
+ /* Terminate frame on error, request a couple retries */
+ if (bus->glomerr++ < 3) {
+ /* Restore superframe header space */
+ PKTPUSH(osh, pfirst, sfdoff);
+ dhdsdio_rxfail(bus, TRUE, TRUE);
+ } else {
+ bus->glomerr = 0;
+ dhdsdio_rxfail(bus, TRUE, FALSE);
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE(osh, bus->glom, FALSE);
+ dhd_os_sdunlock_rxq(bus->dhd);
+ bus->rxglomfail++;
+ bus->glom = NULL;
+ }
+ bus->nextlen = 0;
+ return 0;
+ }
+
+ /* Basic SD framing looks ok - process each packet (header) */
+ save_pfirst = pfirst;
+ bus->glom = NULL;
+ plast = NULL;
+
+ dhd_os_sdlock_rxq(bus->dhd);
+ for (num = 0; pfirst; rxseq++, pfirst = pnext) {
+ pnext = PKTNEXT(osh, pfirst);
+ PKTSETNEXT(osh, pfirst, NULL);
+
+ dptr = (uint8 *)PKTDATA(osh, pfirst);
+ sublen = ltoh16_ua(dptr);
+ chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
+ seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]);
+ doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
+
+ DHD_GLOM(("%s: Get subframe %d, %p(%p/%d), sublen %d chan %d seq %d\n",
+ __FUNCTION__, num, pfirst, PKTDATA(osh, pfirst),
+ PKTLEN(osh, pfirst), sublen, chan, seq));
+
+ ASSERT((chan == SDPCM_DATA_CHANNEL) || (chan == SDPCM_EVENT_CHANNEL));
+
+ if (rxseq != seq) {
+ DHD_GLOM(("%s: rx_seq %d, expected %d\n",
+ __FUNCTION__, seq, rxseq));
+ bus->rx_badseq++;
+ rxseq = seq;
+ }
+
+#ifdef DHD_DEBUG
+ if (DHD_BYTES_ON() && DHD_DATA_ON()) {
+ prhex("Rx Subframe Data", dptr, dlen);
+ }
+#endif
+
+ PKTSETLEN(osh, pfirst, sublen);
+ PKTPULL(osh, pfirst, doff);
+
+ if (PKTLEN(osh, pfirst) == 0) {
+ PKTFREE(bus->dhd->osh, pfirst, FALSE);
+ if (plast) {
+ PKTSETNEXT(osh, plast, pnext);
+ } else {
+ ASSERT(save_pfirst == pfirst);
+ save_pfirst = pnext;
+ }
+ continue;
+ } else if (dhd_prot_hdrpull(bus->dhd, &ifidx, pfirst) != 0) {
+ DHD_ERROR(("%s: rx protocol error\n", __FUNCTION__));
+ bus->dhd->rx_errors++;
+ PKTFREE(osh, pfirst, FALSE);
+ if (plast) {
+ PKTSETNEXT(osh, plast, pnext);
+ } else {
+ ASSERT(save_pfirst == pfirst);
+ save_pfirst = pnext;
+ }
+ continue;
+ }
+
+ /* this packet will go up, link back into chain and count it */
+ PKTSETNEXT(osh, pfirst, pnext);
+ plast = pfirst;
+ num++;
+
+#ifdef DHD_DEBUG
+ if (DHD_GLOM_ON()) {
+ DHD_GLOM(("%s subframe %d to stack, %p(%p/%d) nxt/lnk %p/%p\n",
+ __FUNCTION__, num, pfirst,
+ PKTDATA(osh, pfirst), PKTLEN(osh, pfirst),
+ PKTNEXT(osh, pfirst), PKTLINK(pfirst)));
+ prhex("", (uint8 *)PKTDATA(osh, pfirst),
+ MIN(PKTLEN(osh, pfirst), 32));
+ }
+#endif /* DHD_DEBUG */
+ }
+ dhd_os_sdunlock_rxq(bus->dhd);
+ if (num) {
+ dhd_os_sdunlock(bus->dhd);
+ dhd_rx_frame(bus->dhd, ifidx, save_pfirst, num);
+ dhd_os_sdlock(bus->dhd);
+ }
+
+ bus->rxglomframes++;
+ bus->rxglompkts += num;
+ }
+ return num;
+}
+
+/* Return TRUE if there may be more frames to read */
+static uint
+dhdsdio_readframes(dhd_bus_t *bus, uint maxframes, bool *finished)
+{
+ osl_t *osh = bus->dhd->osh;
+ bcmsdh_info_t *sdh = bus->sdh;
+
+ uint16 len, check; /* Extracted hardware header fields */
+ uint8 chan, seq, doff; /* Extracted software header fields */
+ uint8 fcbits; /* Extracted fcbits from software header */
+ uint8 delta;
+
+ void *pkt; /* Packet for event or data frames */
+ uint16 pad; /* Number of pad bytes to read */
+ uint16 rdlen; /* Total number of bytes to read */
+ uint8 rxseq; /* Next sequence number to expect */
+ uint rxleft = 0; /* Remaining number of frames allowed */
+ int sdret; /* Return code from bcmsdh calls */
+ uint8 txmax; /* Maximum tx sequence offered */
+ bool len_consistent; /* Result of comparing readahead len and len from hw-hdr */
+ uint8 *rxbuf;
+ int ifidx = 0;
+ uint rxcount = 0; /* Total frames read */
+
+#if defined(DHD_DEBUG) || defined(SDTEST)
+ bool sdtest = FALSE; /* To limit message spew from test mode */
+#endif
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ ASSERT(maxframes);
+
+#ifdef SDTEST
+ /* Allow pktgen to override maxframes */
+ if (bus->pktgen_count && (bus->pktgen_mode == DHD_PKTGEN_RECV)) {
+ maxframes = bus->pktgen_count;
+ sdtest = TRUE;
+ }
+#endif
+
+ /* Not finished unless we encounter no more frames indication */
+ *finished = FALSE;
+
+
+ for (rxseq = bus->rx_seq, rxleft = maxframes;
+ !bus->rxskip && rxleft && bus->dhd->busstate != DHD_BUS_DOWN;
+ rxseq++, rxleft--) {
+
+ /* Handle glomming separately */
+ if (bus->glom || bus->glomd) {
+ uint8 cnt;
+ DHD_GLOM(("%s: calling rxglom: glomd %p, glom %p\n",
+ __FUNCTION__, bus->glomd, bus->glom));
+ cnt = dhdsdio_rxglom(bus, rxseq);
+ DHD_GLOM(("%s: rxglom returned %d\n", __FUNCTION__, cnt));
+ rxseq += cnt - 1;
+ rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1;
+ continue;
+ }
+
+ /* Try doing single read if we can */
+ if (dhd_readahead && bus->nextlen) {
+ uint16 nextlen = bus->nextlen;
+ bus->nextlen = 0;
+
+ if (bus->bus == SPI_BUS) {
+ rdlen = len = nextlen;
+ }
+ else {
+ rdlen = len = nextlen << 4;
+
+ /* Pad read to blocksize for efficiency */
+ if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
+ pad = bus->blocksize - (rdlen % bus->blocksize);
+ if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
+ ((rdlen + pad + firstread) < MAX_RX_DATASZ))
+ rdlen += pad;
+ } else if (rdlen % DHD_SDALIGN) {
+ rdlen += DHD_SDALIGN - (rdlen % DHD_SDALIGN);
+ }
+ }
+
+ /* We use bus->rxctl buffer in WinXP for initial control pkt receives.
+ * Later we use buffer-poll for data as well as control packets.
+ * This is required becuase dhd receives full frame in gSPI unlike SDIO.
+ * After the frame is received we have to distinguish whether it is data
+ * or non-data frame.
+ */
+ /* Allocate a packet buffer */
+ dhd_os_sdlock_rxq(bus->dhd);
+ if (!(pkt = PKTGET(osh, rdlen + DHD_SDALIGN, FALSE))) {
+ if (bus->bus == SPI_BUS) {
+ bus->usebufpool = FALSE;
+ bus->rxctl = bus->rxbuf;
+ if (dhd_alignctl) {
+ bus->rxctl += firstread;
+ if ((pad = ((uintptr)bus->rxctl % DHD_SDALIGN)))
+ bus->rxctl += (DHD_SDALIGN - pad);
+ bus->rxctl -= firstread;
+ }
+ ASSERT(bus->rxctl >= bus->rxbuf);
+ rxbuf = bus->rxctl;
+ /* Read the entire frame */
+ sdret = dhd_bcmsdh_recv_buf(bus,
+ bcmsdh_cur_sbwad(sdh),
+ SDIO_FUNC_2,
+ F2SYNC, rxbuf, rdlen,
+ NULL, NULL, NULL);
+ bus->f2rxdata++;
+ ASSERT(sdret != BCME_PENDING);
+
+
+ /* Control frame failures need retransmission */
+ if (sdret < 0) {
+ DHD_ERROR(("%s: read %d control bytes failed: %d\n",
+ __FUNCTION__, rdlen, sdret));
+ /* dhd.rx_ctlerrs is higher level */
+ bus->rxc_errors++;
+ dhd_os_sdunlock_rxq(bus->dhd);
+ dhdsdio_rxfail(bus, TRUE,
+ (bus->bus == SPI_BUS) ? FALSE : TRUE);
+ continue;
+ }
+ } else {
+ /* Give up on data, request rtx of events */
+ DHD_ERROR(("%s (nextlen): PKTGET failed: len %d rdlen %d "
+ "expected rxseq %d\n",
+ __FUNCTION__, len, rdlen, rxseq));
+ /* Just go try again w/normal header read */
+ dhd_os_sdunlock_rxq(bus->dhd);
+ continue;
+ }
+ } else {
+ if (bus->bus == SPI_BUS)
+ bus->usebufpool = TRUE;
+
+ ASSERT(!PKTLINK(pkt));
+ PKTALIGN(osh, pkt, rdlen, DHD_SDALIGN);
+ rxbuf = (uint8 *)PKTDATA(osh, pkt);
+ /* Read the entire frame */
+ sdret = dhd_bcmsdh_recv_buf(bus, bcmsdh_cur_sbwad(sdh),
+ SDIO_FUNC_2,
+ F2SYNC, rxbuf, rdlen,
+ pkt, NULL, NULL);
+ bus->f2rxdata++;
+ ASSERT(sdret != BCME_PENDING);
+
+ if (sdret < 0) {
+ DHD_ERROR(("%s (nextlen): read %d bytes failed: %d\n",
+ __FUNCTION__, rdlen, sdret));
+ PKTFREE(bus->dhd->osh, pkt, FALSE);
+ bus->dhd->rx_errors++;
+ dhd_os_sdunlock_rxq(bus->dhd);
+ /* Force retry w/normal header read. Don't attemp NAK for
+ * gSPI
+ */
+ dhdsdio_rxfail(bus, TRUE,
+ (bus->bus == SPI_BUS) ? FALSE : TRUE);
+ continue;
+ }
+ }
+ dhd_os_sdunlock_rxq(bus->dhd);
+
+ /* Now check the header */
+ bcopy(rxbuf, bus->rxhdr, SDPCM_HDRLEN);
+
+ /* Extract hardware header fields */
+ len = ltoh16_ua(bus->rxhdr);
+ check = ltoh16_ua(bus->rxhdr + sizeof(uint16));
+
+ /* All zeros means readahead info was bad */
+ if (!(len|check)) {
+ DHD_INFO(("%s (nextlen): read zeros in HW header???\n",
+ __FUNCTION__));
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE2();
+ dhd_os_sdunlock_rxq(bus->dhd);
+ GSPI_PR55150_BAILOUT;
+ continue;
+ }
+
+ /* Validate check bytes */
+ if ((uint16)~(len^check)) {
+ DHD_ERROR(("%s (nextlen): HW hdr error: nextlen/len/check"
+ " 0x%04x/0x%04x/0x%04x\n", __FUNCTION__, nextlen,
+ len, check));
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE2();
+ dhd_os_sdunlock_rxq(bus->dhd);
+ bus->rx_badhdr++;
+ dhdsdio_rxfail(bus, FALSE, FALSE);
+ GSPI_PR55150_BAILOUT;
+ continue;
+ }
+
+ /* Validate frame length */
+ if (len < SDPCM_HDRLEN) {
+ DHD_ERROR(("%s (nextlen): HW hdr length invalid: %d\n",
+ __FUNCTION__, len));
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE2();
+ dhd_os_sdunlock_rxq(bus->dhd);
+ GSPI_PR55150_BAILOUT;
+ continue;
+ }
+
+ /* Check for consistency with readahead info */
+ len_consistent = (nextlen != (ROUNDUP(len, 16) >> 4));
+ if (len_consistent) {
+ /* Mismatch, force retry w/normal header (may be >4K) */
+ DHD_ERROR(("%s (nextlen): mismatch, nextlen %d len %d rnd %d; "
+ "expected rxseq %d\n",
+ __FUNCTION__, nextlen, len, ROUNDUP(len, 16), rxseq));
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE2();
+ dhd_os_sdunlock_rxq(bus->dhd);
+ dhdsdio_rxfail(bus, TRUE, (bus->bus == SPI_BUS) ? FALSE : TRUE);
+ GSPI_PR55150_BAILOUT;
+ continue;
+ }
+
+
+ /* Extract software header fields */
+ chan = SDPCM_PACKET_CHANNEL(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
+ seq = SDPCM_PACKET_SEQUENCE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
+ doff = SDPCM_DOFFSET_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
+ txmax = SDPCM_WINDOW_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
+
+ bus->nextlen =
+ bus->rxhdr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
+ if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
+ DHD_INFO(("%s (nextlen): got frame w/nextlen too large"
+ " (%d), seq %d\n", __FUNCTION__, bus->nextlen,
+ seq));
+ bus->nextlen = 0;
+ }
+
+ bus->dhd->rx_readahead_cnt ++;
+ /* Handle Flow Control */
+ fcbits = SDPCM_FCMASK_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
+
+ delta = 0;
+ if (~bus->flowcontrol & fcbits) {
+ bus->fc_xoff++;
+ delta = 1;
+ }
+ if (bus->flowcontrol & ~fcbits) {
+ bus->fc_xon++;
+ delta = 1;
+ }
+
+ if (delta) {
+ bus->fc_rcvd++;
+ bus->flowcontrol = fcbits;
+ }
+
+ /* Check and update sequence number */
+ if (rxseq != seq) {
+ DHD_INFO(("%s (nextlen): rx_seq %d, expected %d\n",
+ __FUNCTION__, seq, rxseq));
+ bus->rx_badseq++;
+ rxseq = seq;
+ }
+
+ /* Check window for sanity */
+ if ((uint8)(txmax - bus->tx_seq) > 0x40) {
+ DHD_ERROR(("%s: got unlikely tx max %d with tx_seq %d\n",
+ __FUNCTION__, txmax, bus->tx_seq));
+ txmax = bus->tx_seq + 2;
+ }
+ bus->tx_max = txmax;
+
+#ifdef DHD_DEBUG
+ if (DHD_BYTES_ON() && DHD_DATA_ON()) {
+ prhex("Rx Data", rxbuf, len);
+ } else if (DHD_HDRS_ON()) {
+ prhex("RxHdr", bus->rxhdr, SDPCM_HDRLEN);
+ }
+#endif
+
+ if (chan == SDPCM_CONTROL_CHANNEL) {
+ if (bus->bus == SPI_BUS) {
+ dhdsdio_read_control(bus, rxbuf, len, doff);
+ if (bus->usebufpool) {
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE(bus->dhd->osh, pkt, FALSE);
+ dhd_os_sdunlock_rxq(bus->dhd);
+ }
+ continue;
+ } else {
+ DHD_ERROR(("%s (nextlen): readahead on control"
+ " packet %d?\n", __FUNCTION__, seq));
+ /* Force retry w/normal header read */
+ bus->nextlen = 0;
+ dhdsdio_rxfail(bus, FALSE, TRUE);
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE2();
+ dhd_os_sdunlock_rxq(bus->dhd);
+ continue;
+ }
+ }
+
+ if ((bus->bus == SPI_BUS) && !bus->usebufpool) {
+ DHD_ERROR(("Received %d bytes on %d channel. Running out of "
+ "rx pktbuf's or not yet malloced.\n", len, chan));
+ continue;
+ }
+
+ /* Validate data offset */
+ if ((doff < SDPCM_HDRLEN) || (doff > len)) {
+ DHD_ERROR(("%s (nextlen): bad data offset %d: HW len %d min %d\n",
+ __FUNCTION__, doff, len, SDPCM_HDRLEN));
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE2();
+ dhd_os_sdunlock_rxq(bus->dhd);
+ ASSERT(0);
+ dhdsdio_rxfail(bus, FALSE, FALSE);
+ continue;
+ }
+
+ /* All done with this one -- now deliver the packet */
+ goto deliver;
+ }
+ /* gSPI frames should not be handled in fractions */
+ if (bus->bus == SPI_BUS) {
+ break;
+ }
+
+ /* Read frame header (hardware and software) */
+ sdret = dhd_bcmsdh_recv_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC,
+ bus->rxhdr, firstread, NULL, NULL, NULL);
+ bus->f2rxhdrs++;
+ ASSERT(sdret != BCME_PENDING);
+
+ if (sdret < 0) {
+ DHD_ERROR(("%s: RXHEADER FAILED: %d\n", __FUNCTION__, sdret));
+ bus->rx_hdrfail++;
+ dhdsdio_rxfail(bus, TRUE, TRUE);
+ continue;
+ }
+
+#ifdef DHD_DEBUG
+ if (DHD_BYTES_ON() || DHD_HDRS_ON()) {
+ prhex("RxHdr", bus->rxhdr, SDPCM_HDRLEN);
+ }
+#endif
+
+ /* Extract hardware header fields */
+ len = ltoh16_ua(bus->rxhdr);
+ check = ltoh16_ua(bus->rxhdr + sizeof(uint16));
+
+ /* All zeros means no more frames */
+ if (!(len|check)) {
+ *finished = TRUE;
+ break;
+ }
+
+ /* Validate check bytes */
+ if ((uint16)~(len^check)) {
+ DHD_ERROR(("%s: HW hdr error: len/check 0x%04x/0x%04x\n",
+ __FUNCTION__, len, check));
+ bus->rx_badhdr++;
+ dhdsdio_rxfail(bus, FALSE, FALSE);
+ continue;
+ }
+
+ /* Validate frame length */
+ if (len < SDPCM_HDRLEN) {
+ DHD_ERROR(("%s: HW hdr length invalid: %d\n", __FUNCTION__, len));
+ continue;
+ }
+
+ /* Extract software header fields */
+ chan = SDPCM_PACKET_CHANNEL(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
+ seq = SDPCM_PACKET_SEQUENCE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
+ doff = SDPCM_DOFFSET_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
+ txmax = SDPCM_WINDOW_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
+
+ /* Validate data offset */
+ if ((doff < SDPCM_HDRLEN) || (doff > len)) {
+ DHD_ERROR(("%s: Bad data offset %d: HW len %d, min %d seq %d\n",
+ __FUNCTION__, doff, len, SDPCM_HDRLEN, seq));
+ bus->rx_badhdr++;
+ ASSERT(0);
+ dhdsdio_rxfail(bus, FALSE, FALSE);
+ continue;
+ }
+
+ /* Save the readahead length if there is one */
+ bus->nextlen = bus->rxhdr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
+ if ((bus->nextlen << 4) > MAX_RX_DATASZ) {
+ DHD_INFO(("%s (nextlen): got frame w/nextlen too large (%d), seq %d\n",
+ __FUNCTION__, bus->nextlen, seq));
+ bus->nextlen = 0;
+ }
+
+ /* Handle Flow Control */
+ fcbits = SDPCM_FCMASK_VALUE(&bus->rxhdr[SDPCM_FRAMETAG_LEN]);
+
+ delta = 0;
+ if (~bus->flowcontrol & fcbits) {
+ bus->fc_xoff++;
+ delta = 1;
+ }
+ if (bus->flowcontrol & ~fcbits) {
+ bus->fc_xon++;
+ delta = 1;
+ }
+
+ if (delta) {
+ bus->fc_rcvd++;
+ bus->flowcontrol = fcbits;
+ }
+
+ /* Check and update sequence number */
+ if (rxseq != seq) {
+ DHD_INFO(("%s: rx_seq %d, expected %d\n", __FUNCTION__, seq, rxseq));
+ bus->rx_badseq++;
+ rxseq = seq;
+ }
+
+ /* Check window for sanity */
+ if ((uint8)(txmax - bus->tx_seq) > 0x40) {
+ DHD_ERROR(("%s: got unlikely tx max %d with tx_seq %d\n",
+ __FUNCTION__, txmax, bus->tx_seq));
+ txmax = bus->tx_seq + 2;
+ }
+ bus->tx_max = txmax;
+
+ /* Call a separate function for control frames */
+ if (chan == SDPCM_CONTROL_CHANNEL) {
+ dhdsdio_read_control(bus, bus->rxhdr, len, doff);
+ continue;
+ }
+
+ ASSERT((chan == SDPCM_DATA_CHANNEL) || (chan == SDPCM_EVENT_CHANNEL) ||
+ (chan == SDPCM_TEST_CHANNEL) || (chan == SDPCM_GLOM_CHANNEL));
+
+ /* Length to read */
+ rdlen = (len > firstread) ? (len - firstread) : 0;
+
+ /* May pad read to blocksize for efficiency */
+ if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
+ pad = bus->blocksize - (rdlen % bus->blocksize);
+ if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
+ ((rdlen + pad + firstread) < MAX_RX_DATASZ))
+ rdlen += pad;
+ } else if (rdlen % DHD_SDALIGN) {
+ rdlen += DHD_SDALIGN - (rdlen % DHD_SDALIGN);
+ }
+
+ /* Satisfy length-alignment requirements */
+ if (forcealign && (rdlen & (ALIGNMENT - 1)))
+ rdlen = ROUNDUP(rdlen, ALIGNMENT);
+
+ if ((rdlen + firstread) > MAX_RX_DATASZ) {
+ /* Too long -- skip this frame */
+ DHD_ERROR(("%s: too long: len %d rdlen %d\n", __FUNCTION__, len, rdlen));
+ bus->dhd->rx_errors++; bus->rx_toolong++;
+ dhdsdio_rxfail(bus, FALSE, FALSE);
+ continue;
+ }
+
+ dhd_os_sdlock_rxq(bus->dhd);
+ if (!(pkt = PKTGET(osh, (rdlen + firstread + DHD_SDALIGN), FALSE))) {
+ /* Give up on data, request rtx of events */
+ DHD_ERROR(("%s: PKTGET failed: rdlen %d chan %d\n",
+ __FUNCTION__, rdlen, chan));
+ bus->dhd->rx_dropped++;
+ dhd_os_sdunlock_rxq(bus->dhd);
+ dhdsdio_rxfail(bus, FALSE, RETRYCHAN(chan));
+ continue;
+ }
+ dhd_os_sdunlock_rxq(bus->dhd);
+
+ ASSERT(!PKTLINK(pkt));
+
+ /* Leave room for what we already read, and align remainder */
+ ASSERT(firstread < (PKTLEN(osh, pkt)));
+ PKTPULL(osh, pkt, firstread);
+ PKTALIGN(osh, pkt, rdlen, DHD_SDALIGN);
+
+ /* Read the remaining frame data */
+ sdret = dhd_bcmsdh_recv_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC,
+ ((uint8 *)PKTDATA(osh, pkt)), rdlen, pkt, NULL, NULL);
+ bus->f2rxdata++;
+ ASSERT(sdret != BCME_PENDING);
+
+ if (sdret < 0) {
+ DHD_ERROR(("%s: read %d %s bytes failed: %d\n", __FUNCTION__, rdlen,
+ ((chan == SDPCM_EVENT_CHANNEL) ? "event" :
+ ((chan == SDPCM_DATA_CHANNEL) ? "data" : "test")), sdret));
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE(bus->dhd->osh, pkt, FALSE);
+ dhd_os_sdunlock_rxq(bus->dhd);
+ bus->dhd->rx_errors++;
+ dhdsdio_rxfail(bus, TRUE, RETRYCHAN(chan));
+ continue;
+ }
+
+ /* Copy the already-read portion */
+ PKTPUSH(osh, pkt, firstread);
+ bcopy(bus->rxhdr, PKTDATA(osh, pkt), firstread);
+
+#ifdef DHD_DEBUG
+ if (DHD_BYTES_ON() && DHD_DATA_ON()) {
+ prhex("Rx Data", PKTDATA(osh, pkt), len);
+ }
+#endif
+
+deliver:
+ /* Save superframe descriptor and allocate packet frame */
+ if (chan == SDPCM_GLOM_CHANNEL) {
+ if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_FRAMETAG_LEN])) {
+ DHD_GLOM(("%s: got glom descriptor, %d bytes:\n",
+ __FUNCTION__, len));
+#ifdef DHD_DEBUG
+ if (DHD_GLOM_ON()) {
+ prhex("Glom Data", PKTDATA(osh, pkt), len);
+ }
+#endif
+ PKTSETLEN(osh, pkt, len);
+ ASSERT(doff == SDPCM_HDRLEN);
+ PKTPULL(osh, pkt, SDPCM_HDRLEN);
+ bus->glomd = pkt;
+ } else {
+ DHD_ERROR(("%s: glom superframe w/o descriptor!\n", __FUNCTION__));
+ dhdsdio_rxfail(bus, FALSE, FALSE);
+ }
+ continue;
+ }
+
+ /* Fill in packet len and prio, deliver upward */
+ PKTSETLEN(osh, pkt, len);
+ PKTPULL(osh, pkt, doff);
+
+#ifdef SDTEST
+ /* Test channel packets are processed separately */
+ if (chan == SDPCM_TEST_CHANNEL) {
+ dhdsdio_testrcv(bus, pkt, seq);
+ continue;
+ }
+#endif /* SDTEST */
+
+ if (PKTLEN(osh, pkt) == 0) {
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE(bus->dhd->osh, pkt, FALSE);
+ dhd_os_sdunlock_rxq(bus->dhd);
+ continue;
+ } else if (dhd_prot_hdrpull(bus->dhd, &ifidx, pkt) != 0) {
+ DHD_ERROR(("%s: rx protocol error\n", __FUNCTION__));
+ dhd_os_sdlock_rxq(bus->dhd);
+ PKTFREE(bus->dhd->osh, pkt, FALSE);
+ dhd_os_sdunlock_rxq(bus->dhd);
+ bus->dhd->rx_errors++;
+ continue;
+ }
+
+
+ /* Unlock during rx call */
+ dhd_os_sdunlock(bus->dhd);
+ dhd_rx_frame(bus->dhd, ifidx, pkt, 1);
+ dhd_os_sdlock(bus->dhd);
+ }
+ rxcount = maxframes - rxleft;
+#ifdef DHD_DEBUG
+ /* Message if we hit the limit */
+ if (!rxleft && !sdtest)
+ DHD_DATA(("%s: hit rx limit of %d frames\n", __FUNCTION__, maxframes));
+ else
+#endif /* DHD_DEBUG */
+ DHD_DATA(("%s: processed %d frames\n", __FUNCTION__, rxcount));
+ /* Back off rxseq if awaiting rtx, update rx_seq */
+ if (bus->rxskip)
+ rxseq--;
+ bus->rx_seq = rxseq;
+
+ return rxcount;
+}
+
+static uint32
+dhdsdio_hostmail(dhd_bus_t *bus)
+{
+ sdpcmd_regs_t *regs = bus->regs;
+ uint32 intstatus = 0;
+ uint32 hmb_data;
+ uint8 fcbits;
+ uint retries = 0;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ /* Read mailbox data and ack that we did so */
+ R_SDREG(hmb_data, ®s->tohostmailboxdata, retries);
+ if (retries <= retry_limit)
+ W_SDREG(SMB_INT_ACK, ®s->tosbmailbox, retries);
+ bus->f1regdata += 2;
+
+ /* Dongle recomposed rx frames, accept them again */
+ if (hmb_data & HMB_DATA_NAKHANDLED) {
+ DHD_INFO(("Dongle reports NAK handled, expect rtx of %d\n", bus->rx_seq));
+ if (!bus->rxskip) {
+ DHD_ERROR(("%s: unexpected NAKHANDLED!\n", __FUNCTION__));
+ }
+ bus->rxskip = FALSE;
+ intstatus |= I_HMB_FRAME_IND;
+ }
+
+ /*
+ * DEVREADY does not occur with gSPI.
+ */
+ if (hmb_data & (HMB_DATA_DEVREADY | HMB_DATA_FWREADY)) {
+ bus->sdpcm_ver = (hmb_data & HMB_DATA_VERSION_MASK) >> HMB_DATA_VERSION_SHIFT;
+ if (bus->sdpcm_ver != SDPCM_PROT_VERSION)
+ DHD_ERROR(("Version mismatch, dongle reports %d, expecting %d\n",
+ bus->sdpcm_ver, SDPCM_PROT_VERSION));
+ else
+ DHD_INFO(("Dongle ready, protocol version %d\n", bus->sdpcm_ver));
+ }
+
+ /*
+ * Flow Control has been moved into the RX headers and this out of band
+ * method isn't used any more. Leae this here for possibly remaining backward
+ * compatible with older dongles
+ */
+ if (hmb_data & HMB_DATA_FC) {
+ fcbits = (hmb_data & HMB_DATA_FCDATA_MASK) >> HMB_DATA_FCDATA_SHIFT;
+
+ if (fcbits & ~bus->flowcontrol)
+ bus->fc_xoff++;
+ if (bus->flowcontrol & ~fcbits)
+ bus->fc_xon++;
+
+ bus->fc_rcvd++;
+ bus->flowcontrol = fcbits;
+ }
+
+ /* Shouldn't be any others */
+ if (hmb_data & ~(HMB_DATA_DEVREADY |
+ HMB_DATA_NAKHANDLED |
+ HMB_DATA_FC |
+ HMB_DATA_FWREADY |
+ HMB_DATA_FCDATA_MASK |
+ HMB_DATA_VERSION_MASK)) {
+ DHD_ERROR(("Unknown mailbox data content: 0x%02x\n", hmb_data));
+ }
+
+ return intstatus;
+}
+
+bool
+dhdsdio_dpc(dhd_bus_t *bus)
+{
+ bcmsdh_info_t *sdh = bus->sdh;
+ sdpcmd_regs_t *regs = bus->regs;
+ uint32 intstatus, newstatus = 0;
+ uint retries = 0;
+ uint rxlimit = dhd_rxbound; /* Rx frames to read before resched */
+ uint txlimit = dhd_txbound; /* Tx frames to send before resched */
+ uint framecnt = 0; /* Temporary counter of tx/rx frames */
+ bool rxdone = TRUE; /* Flag for no more read data */
+ bool resched = FALSE; /* Flag indicating resched wanted */
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ /* Start with leftover status bits */
+ intstatus = bus->intstatus;
+
+ dhd_os_sdlock(bus->dhd);
+
+ /* If waiting for HTAVAIL, check status */
+ if (bus->clkstate == CLK_PENDING) {
+ int err;
+ uint8 clkctl, devctl = 0;
+
+#ifdef DHD_DEBUG
+ /* Check for inconsistent device control */
+ devctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err);
+ if (err) {
+ DHD_ERROR(("%s: error reading DEVCTL: %d\n", __FUNCTION__, err));
+ bus->dhd->busstate = DHD_BUS_DOWN;
+ } else {
+ ASSERT(devctl & SBSDIO_DEVCTL_CA_INT_ONLY);
+ }
+#endif /* DHD_DEBUG */
+
+ /* Read CSR, if clock on switch to AVAIL, else ignore */
+ clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err);
+ if (err) {
+ DHD_ERROR(("%s: error reading CSR: %d\n", __FUNCTION__, err));
+ bus->dhd->busstate = DHD_BUS_DOWN;
+ }
+
+ DHD_INFO(("DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n", devctl, clkctl));
+
+ if (SBSDIO_HTAV(clkctl)) {
+ devctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, &err);
+ if (err) {
+ DHD_ERROR(("%s: error reading DEVCTL: %d\n",
+ __FUNCTION__, err));
+ bus->dhd->busstate = DHD_BUS_DOWN;
+ }
+ devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_DEVICE_CTL, devctl, &err);
+ if (err) {
+ DHD_ERROR(("%s: error writing DEVCTL: %d\n",
+ __FUNCTION__, err));
+ bus->dhd->busstate = DHD_BUS_DOWN;
+ }
+ bus->clkstate = CLK_AVAIL;
+ } else {
+ goto clkwait;
+ }
+ }
+
+ BUS_WAKE(bus);
+
+ /* Make sure backplane clock is on */
+ dhdsdio_clkctl(bus, CLK_AVAIL, TRUE);
+ if (bus->clkstate == CLK_PENDING)
+ goto clkwait;
+
+ /* Pending interrupt indicates new device status */
+ if (bus->ipend) {
+ bus->ipend = FALSE;
+ R_SDREG(newstatus, ®s->intstatus, retries);
+ bus->f1regdata++;
+ if (bcmsdh_regfail(bus->sdh))
+ newstatus = 0;
+ newstatus &= bus->hostintmask;
+ bus->fcstate = !!(newstatus & I_HMB_FC_STATE);
+ if (newstatus) {
+ W_SDREG(newstatus, ®s->intstatus, retries);
+ bus->f1regdata++;
+ }
+ }
+
+ /* Merge new bits with previous */
+ intstatus |= newstatus;
+ bus->intstatus = 0;
+
+ /* Handle flow-control change: read new state in case our ack
+ * crossed another change interrupt. If change still set, assume
+ * FC ON for safety, let next loop through do the debounce.
+ */
+ if (intstatus & I_HMB_FC_CHANGE) {
+ intstatus &= ~I_HMB_FC_CHANGE;
+ W_SDREG(I_HMB_FC_CHANGE, ®s->intstatus, retries);
+ R_SDREG(newstatus, ®s->intstatus, retries);
+ bus->f1regdata += 2;
+ bus->fcstate = !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE));
+ intstatus |= (newstatus & bus->hostintmask);
+ }
+
+ /* Handle host mailbox indication */
+ if (intstatus & I_HMB_HOST_INT) {
+ intstatus &= ~I_HMB_HOST_INT;
+ intstatus |= dhdsdio_hostmail(bus);
+ }
+
+ /* Generally don't ask for these, can get CRC errors... */
+ if (intstatus & I_WR_OOSYNC) {
+ DHD_ERROR(("Dongle reports WR_OOSYNC\n"));
+ intstatus &= ~I_WR_OOSYNC;
+ }
+
+ if (intstatus & I_RD_OOSYNC) {
+ DHD_ERROR(("Dongle reports RD_OOSYNC\n"));
+ intstatus &= ~I_RD_OOSYNC;
+ }
+
+ if (intstatus & I_SBINT) {
+ DHD_ERROR(("Dongle reports SBINT\n"));
+ intstatus &= ~I_SBINT;
+ }
+
+ /* Would be active due to wake-wlan in gSPI */
+ if (intstatus & I_CHIPACTIVE) {
+ DHD_INFO(("Dongle reports CHIPACTIVE\n"));
+ intstatus &= ~I_CHIPACTIVE;
+ }
+
+ /* Ignore frame indications if rxskip is set */
+ if (bus->rxskip)
+ intstatus &= ~I_HMB_FRAME_IND;
+
+ /* On frame indication, read available frames */
+ if (PKT_AVAILABLE()) {
+ framecnt = dhdsdio_readframes(bus, rxlimit, &rxdone);
+ if (rxdone || bus->rxskip)
+ intstatus &= ~I_HMB_FRAME_IND;
+ rxlimit -= MIN(framecnt, rxlimit);
+ }
+
+ /* Keep still-pending events for next scheduling */
+ bus->intstatus = intstatus;
+
+clkwait:
+ /* Re-enable interrupts to detect new device events (mailbox, rx frame)
+ * or clock availability. (Allows tx loop to check ipend if desired.)
+ * (Unless register access seems hosed, as we may not be able to ACK...)
+ */
+ if (bus->intr && bus->intdis && !bcmsdh_regfail(sdh)) {
+ DHD_INTR(("%s: enable SDIO interrupts, rxdone %d framecnt %d\n",
+ __FUNCTION__, rxdone, framecnt));
+ bus->intdis = FALSE;
+#if defined(OOB_INTR_ONLY)
+ bcmsdh_oob_intr_set(1);
+#endif /* (OOB_INTR_ONLY) */
+ bcmsdh_intr_enable(sdh);
+ }
+
+ if (DATAOK(bus) && bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL)) {
+ int ret, i;
+
+ ret = dhd_bcmsdh_send_buf(bus, bcmsdh_cur_sbwad(sdh), SDIO_FUNC_2, F2SYNC,
+ (uint8 *)bus->ctrl_frame_buf, (uint32)bus->ctrl_frame_len,
+ NULL, NULL, NULL);
+ ASSERT(ret != BCME_PENDING);
+
+ if (ret < 0) {
+ /* On failure, abort the command and terminate the frame */
+ DHD_INFO(("%s: sdio error %d, abort command and terminate frame.\n",
+ __FUNCTION__, ret));
+ bus->tx_sderrs++;
+
+ bcmsdh_abort(sdh, SDIO_FUNC_2);
+
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_FRAMECTRL,
+ SFC_WF_TERM, NULL);
+ bus->f1regdata++;
+
+ for (i = 0; i < 3; i++) {
+ uint8 hi, lo;
+ hi = bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
+ SBSDIO_FUNC1_WFRAMEBCHI, NULL);
+ lo = bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
+ SBSDIO_FUNC1_WFRAMEBCLO, NULL);
+ bus->f1regdata += 2;
+ if ((hi == 0) && (lo == 0))
+ break;
+ }
+
+ }
+ if (ret == 0) {
+ bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
+ }
+
+ printf("Return_dpc value is : %d\n", ret);
+ bus->ctrl_frame_stat = FALSE;
+ dhd_wait_event_wakeup(bus->dhd);
+ }
+ /* Send queued frames (limit 1 if rx may still be pending) */
+ else if ((bus->clkstate == CLK_AVAIL) && !bus->fcstate &&
+ pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit && DATAOK(bus)) {
+ framecnt = rxdone ? txlimit : MIN(txlimit, dhd_txminmax);
+ framecnt = dhdsdio_sendfromq(bus, framecnt);
+ txlimit -= framecnt;
+ }
+
+ /* Resched if events or tx frames are pending, else await next interrupt */
+ /* On failed register access, all bets are off: no resched or interrupts */
+ if ((bus->dhd->busstate == DHD_BUS_DOWN) || bcmsdh_regfail(sdh)) {
+ DHD_ERROR(("%s: failed backplane access over SDIO, halting operation %d \n",
+ __FUNCTION__, bcmsdh_regfail(sdh)));
+ bus->dhd->busstate = DHD_BUS_DOWN;
+ bus->intstatus = 0;
+ } else if (bus->clkstate == CLK_PENDING) {
+ DHD_INFO(("%s: rescheduled due to CLK_PENDING awaiting \
+ I_CHIPACTIVE interrupt", __FUNCTION__));
+ resched = TRUE;
+ } else if (bus->intstatus || bus->ipend ||
+ (!bus->fcstate && pktq_mlen(&bus->txq, ~bus->flowcontrol) && DATAOK(bus)) ||
+ PKT_AVAILABLE()) { /* Read multiple frames */
+ resched = TRUE;
+ }
+
+
+ bus->dpc_sched = resched;
+
+ /* If we're done for now, turn off clock request. */
+ if ((bus->clkstate != CLK_PENDING) && bus->idletime == DHD_IDLE_IMMEDIATE) {
+ bus->activity = FALSE;
+ dhdsdio_clkctl(bus, CLK_NONE, FALSE);
+ }
+
+ dhd_os_sdunlock(bus->dhd);
+
+ return resched;
+}
+
+bool
+dhd_bus_dpc(struct dhd_bus *bus)
+{
+ bool resched;
+
+ /* Call the DPC directly. */
+ DHD_TRACE(("Calling dhdsdio_dpc() from %s\n", __FUNCTION__));
+ resched = dhdsdio_dpc(bus);
+
+ return resched;
+}
+
+void
+dhdsdio_isr(void *arg)
+{
+ dhd_bus_t *bus = (dhd_bus_t*)arg;
+ bcmsdh_info_t *sdh;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (!bus) {
+ DHD_ERROR(("%s : bus is null pointer , exit \n", __FUNCTION__));
+ return;
+ }
+ sdh = bus->sdh;
+
+ if (bus->dhd->busstate == DHD_BUS_DOWN) {
+ DHD_ERROR(("%s : bus is down. we have nothing to do\n", __FUNCTION__));
+ return;
+ }
+ /* Count the interrupt call */
+ bus->intrcount++;
+ bus->ipend = TRUE;
+
+ /* Shouldn't get this interrupt if we're sleeping? */
+ if (bus->sleeping) {
+ DHD_ERROR(("INTERRUPT WHILE SLEEPING??\n"));
+ return;
+ }
+
+ /* Disable additional interrupts (is this needed now)? */
+ if (bus->intr) {
+ DHD_INTR(("%s: disable SDIO interrupts\n", __FUNCTION__));
+ } else {
+ DHD_ERROR(("dhdsdio_isr() w/o interrupt configured!\n"));
+ }
+
+ bcmsdh_intr_disable(sdh);
+ bus->intdis = TRUE;
+
+#if defined(SDIO_ISR_THREAD)
+ DHD_TRACE(("Calling dhdsdio_dpc() from %s\n", __FUNCTION__));
+ dhd_os_wake_lock(bus->dhd);
+ while (dhdsdio_dpc(bus));
+ dhd_os_wake_unlock(bus->dhd);
+#else
+ bus->dpc_sched = TRUE;
+ dhd_sched_dpc(bus->dhd);
+#endif
+
+}
+
+#ifdef SDTEST
+static void
+dhdsdio_pktgen_init(dhd_bus_t *bus)
+{
+ /* Default to specified length, or full range */
+ if (dhd_pktgen_len) {
+ bus->pktgen_maxlen = MIN(dhd_pktgen_len, MAX_PKTGEN_LEN);
+ bus->pktgen_minlen = bus->pktgen_maxlen;
+ } else {
+ bus->pktgen_maxlen = MAX_PKTGEN_LEN;
+ bus->pktgen_minlen = 0;
+ }
+ bus->pktgen_len = (uint16)bus->pktgen_minlen;
+
+ /* Default to per-watchdog burst with 10s print time */
+ bus->pktgen_freq = 1;
+ bus->pktgen_print = 10000 / dhd_watchdog_ms;
+ bus->pktgen_count = (dhd_pktgen * dhd_watchdog_ms + 999) / 1000;
+
+ /* Default to echo mode */
+ bus->pktgen_mode = DHD_PKTGEN_ECHO;
+ bus->pktgen_stop = 1;
+}
+
+static void
+dhdsdio_pktgen(dhd_bus_t *bus)
+{
+ void *pkt;
+ uint8 *data;
+ uint pktcount;
+ uint fillbyte;
+ osl_t *osh = bus->dhd->osh;
+ uint16 len;
+
+ /* Display current count if appropriate */
+ if (bus->pktgen_print && (++bus->pktgen_ptick >= bus->pktgen_print)) {
+ bus->pktgen_ptick = 0;
+ printf("%s: send attempts %d rcvd %d\n",
+ __FUNCTION__, bus->pktgen_sent, bus->pktgen_rcvd);
+ }
+
+ /* For recv mode, just make sure dongle has started sending */
+ if (bus->pktgen_mode == DHD_PKTGEN_RECV) {
+ if (!bus->pktgen_rcvd)
+ dhdsdio_sdtest_set(bus, TRUE);
+ return;
+ }
+
+ /* Otherwise, generate or request the specified number of packets */
+ for (pktcount = 0; pktcount < bus->pktgen_count; pktcount++) {
+ /* Stop if total has been reached */
+ if (bus->pktgen_total && (bus->pktgen_sent >= bus->pktgen_total)) {
+ bus->pktgen_count = 0;
+ break;
+ }
+
+ /* Allocate an appropriate-sized packet */
+ len = bus->pktgen_len;
+ if (!(pkt = PKTGET(osh, (len + SDPCM_HDRLEN + SDPCM_TEST_HDRLEN + DHD_SDALIGN),
+ TRUE))) {;
+ DHD_ERROR(("%s: PKTGET failed!\n", __FUNCTION__));
+ break;
+ }
+ PKTALIGN(osh, pkt, (len + SDPCM_HDRLEN + SDPCM_TEST_HDRLEN), DHD_SDALIGN);
+ data = (uint8*)PKTDATA(osh, pkt) + SDPCM_HDRLEN;
+
+ /* Write test header cmd and extra based on mode */
+ switch (bus->pktgen_mode) {
+ case DHD_PKTGEN_ECHO:
+ *data++ = SDPCM_TEST_ECHOREQ;
+ *data++ = (uint8)bus->pktgen_sent;
+ break;
+
+ case DHD_PKTGEN_SEND:
+ *data++ = SDPCM_TEST_DISCARD;
+ *data++ = (uint8)bus->pktgen_sent;
+ break;
+
+ case DHD_PKTGEN_RXBURST:
+ *data++ = SDPCM_TEST_BURST;
+ *data++ = (uint8)bus->pktgen_count;
+ break;
+
+ default:
+ DHD_ERROR(("Unrecognized pktgen mode %d\n", bus->pktgen_mode));
+ PKTFREE(osh, pkt, TRUE);
+ bus->pktgen_count = 0;
+ return;
+ }
+
+ /* Write test header length field */
+ *data++ = (len >> 0);
+ *data++ = (len >> 8);
+
+ /* Then fill in the remainder -- N/A for burst, but who cares... */
+ for (fillbyte = 0; fillbyte < len; fillbyte++)
+ *data++ = SDPCM_TEST_FILL(fillbyte, (uint8)bus->pktgen_sent);
+
+#ifdef DHD_DEBUG
+ if (DHD_BYTES_ON() && DHD_DATA_ON()) {
+ data = (uint8*)PKTDATA(osh, pkt) + SDPCM_HDRLEN;
+ prhex("dhdsdio_pktgen: Tx Data", data, PKTLEN(osh, pkt) - SDPCM_HDRLEN);
+ }
+#endif
+
+ /* Send it */
+ if (dhdsdio_txpkt(bus, pkt, SDPCM_TEST_CHANNEL, TRUE)) {
+ bus->pktgen_fail++;
+ if (bus->pktgen_stop && bus->pktgen_stop == bus->pktgen_fail)
+ bus->pktgen_count = 0;
+ }
+ bus->pktgen_sent++;
+
+ /* Bump length if not fixed, wrap at max */
+ if (++bus->pktgen_len > bus->pktgen_maxlen)
+ bus->pktgen_len = (uint16)bus->pktgen_minlen;
+
+ /* Special case for burst mode: just send one request! */
+ if (bus->pktgen_mode == DHD_PKTGEN_RXBURST)
+ break;
+ }
+}
+
+static void
+dhdsdio_sdtest_set(dhd_bus_t *bus, bool start)
+{
+ void *pkt;
+ uint8 *data;
+ osl_t *osh = bus->dhd->osh;
+
+ /* Allocate the packet */
+ if (!(pkt = PKTGET(osh, SDPCM_HDRLEN + SDPCM_TEST_HDRLEN + DHD_SDALIGN, TRUE))) {
+ DHD_ERROR(("%s: PKTGET failed!\n", __FUNCTION__));
+ return;
+ }
+ PKTALIGN(osh, pkt, (SDPCM_HDRLEN + SDPCM_TEST_HDRLEN), DHD_SDALIGN);
+ data = (uint8*)PKTDATA(osh, pkt) + SDPCM_HDRLEN;
+
+ /* Fill in the test header */
+ *data++ = SDPCM_TEST_SEND;
+ *data++ = start;
+ *data++ = (bus->pktgen_maxlen >> 0);
+ *data++ = (bus->pktgen_maxlen >> 8);
+
+ /* Send it */
+ if (dhdsdio_txpkt(bus, pkt, SDPCM_TEST_CHANNEL, TRUE))
+ bus->pktgen_fail++;
+}
+
+
+static void
+dhdsdio_testrcv(dhd_bus_t *bus, void *pkt, uint seq)
+{
+ osl_t *osh = bus->dhd->osh;
+ uint8 *data;
+ uint pktlen;
+
+ uint8 cmd;
+ uint8 extra;
+ uint16 len;
+ uint16 offset;
+
+ /* Check for min length */
+ if ((pktlen = PKTLEN(osh, pkt)) < SDPCM_TEST_HDRLEN) {
+ DHD_ERROR(("dhdsdio_restrcv: toss runt frame, pktlen %d\n", pktlen));
+ PKTFREE(osh, pkt, FALSE);
+ return;
+ }
+
+ /* Extract header fields */
+ data = PKTDATA(osh, pkt);
+ cmd = *data++;
+ extra = *data++;
+ len = *data++; len += *data++ << 8;
+
+ /* Check length for relevant commands */
+ if (cmd == SDPCM_TEST_DISCARD || cmd == SDPCM_TEST_ECHOREQ || cmd == SDPCM_TEST_ECHORSP) {
+ if (pktlen != len + SDPCM_TEST_HDRLEN) {
+ DHD_ERROR(("dhdsdio_testrcv: frame length mismatch, pktlen %d seq %d"
+ " cmd %d extra %d len %d\n", pktlen, seq, cmd, extra, len));
+ PKTFREE(osh, pkt, FALSE);
+ return;
+ }
+ }
+
+ /* Process as per command */
+ switch (cmd) {
+ case SDPCM_TEST_ECHOREQ:
+ /* Rx->Tx turnaround ok (even on NDIS w/current implementation) */
+ *(uint8 *)(PKTDATA(osh, pkt)) = SDPCM_TEST_ECHORSP;
+ if (dhdsdio_txpkt(bus, pkt, SDPCM_TEST_CHANNEL, TRUE) == 0) {
+ bus->pktgen_sent++;
+ } else {
+ bus->pktgen_fail++;
+ PKTFREE(osh, pkt, FALSE);
+ }
+ bus->pktgen_rcvd++;
+ break;
+
+ case SDPCM_TEST_ECHORSP:
+ if (bus->ext_loop) {
+ PKTFREE(osh, pkt, FALSE);
+ bus->pktgen_rcvd++;
+ break;
+ }
+
+ for (offset = 0; offset < len; offset++, data++) {
+ if (*data != SDPCM_TEST_FILL(offset, extra)) {
+ DHD_ERROR(("dhdsdio_testrcv: echo data mismatch: "
+ "offset %d (len %d) expect 0x%02x rcvd 0x%02x\n",
+ offset, len, SDPCM_TEST_FILL(offset, extra), *data));
+ break;
+ }
+ }
+ PKTFREE(osh, pkt, FALSE);
+ bus->pktgen_rcvd++;
+ break;
+
+ case SDPCM_TEST_DISCARD:
+ PKTFREE(osh, pkt, FALSE);
+ bus->pktgen_rcvd++;
+ break;
+
+ case SDPCM_TEST_BURST:
+ case SDPCM_TEST_SEND:
+ default:
+ DHD_INFO(("dhdsdio_testrcv: unsupported or unknown command, pktlen %d seq %d"
+ " cmd %d extra %d len %d\n", pktlen, seq, cmd, extra, len));
+ PKTFREE(osh, pkt, FALSE);
+ break;
+ }
+
+ /* For recv mode, stop at limie (and tell dongle to stop sending) */
+ if (bus->pktgen_mode == DHD_PKTGEN_RECV) {
+ if (bus->pktgen_total && (bus->pktgen_rcvd >= bus->pktgen_total)) {
+ bus->pktgen_count = 0;
+ dhdsdio_sdtest_set(bus, FALSE);
+ }
+ }
+}
+#endif /* SDTEST */
+
+extern bool
+dhd_bus_watchdog(dhd_pub_t *dhdp)
+{
+ dhd_bus_t *bus;
+
+ DHD_TIMER(("%s: Enter\n", __FUNCTION__));
+
+ bus = dhdp->bus;
+
+ if (bus->dhd->dongle_reset)
+ return FALSE;
+
+ /* Ignore the timer if simulating bus down */
+ if (bus->sleeping)
+ return FALSE;
+
+ /* Poll period: check device if appropriate. */
+ if (bus->poll && (++bus->polltick >= bus->pollrate)) {
+ uint32 intstatus = 0;
+
+ /* Reset poll tick */
+ bus->polltick = 0;
+
+ /* Check device if no interrupts */
+ if (!bus->intr || (bus->intrcount == bus->lastintrs)) {
+
+ if (!bus->dpc_sched) {
+ uint8 devpend;
+ devpend = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_0,
+ SDIOD_CCCR_INTPEND, NULL);
+ intstatus = devpend & (INTR_STATUS_FUNC1 | INTR_STATUS_FUNC2);
+ }
+
+ /* If there is something, make like the ISR and schedule the DPC */
+ if (intstatus) {
+ bus->pollcnt++;
+ bus->ipend = TRUE;
+ if (bus->intr) {
+ bcmsdh_intr_disable(bus->sdh);
+ }
+ bus->dpc_sched = TRUE;
+ dhd_sched_dpc(bus->dhd);
+
+ }
+ }
+
+ /* Update interrupt tracking */
+ bus->lastintrs = bus->intrcount;
+ }
+
+#ifdef DHD_DEBUG
+ /* Poll for console output periodically */
+ if (dhdp->busstate == DHD_BUS_DATA && dhd_console_ms != 0) {
+ bus->console.count += dhd_watchdog_ms;
+ if (bus->console.count >= dhd_console_ms) {
+ bus->console.count -= dhd_console_ms;
+ /* Make sure backplane clock is on */
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+ if (dhdsdio_readconsole(bus) < 0)
+ dhd_console_ms = 0; /* On error, stop trying */
+ }
+ }
+#endif /* DHD_DEBUG */
+
+#ifdef SDTEST
+ /* Generate packets if configured */
+ if (bus->pktgen_count && (++bus->pktgen_tick >= bus->pktgen_freq)) {
+ /* Make sure backplane clock is on */
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+ bus->pktgen_tick = 0;
+ dhdsdio_pktgen(bus);
+ }
+#endif
+
+ /* On idle timeout clear activity flag and/or turn off clock */
+ if ((bus->idletime > 0) && (bus->clkstate == CLK_AVAIL)) {
+ if (++bus->idlecount >= bus->idletime) {
+ bus->idlecount = 0;
+ if (bus->activity) {
+ bus->activity = FALSE;
+ dhdsdio_clkctl(bus, CLK_NONE, FALSE);
+ }
+ }
+ }
+
+ return bus->ipend;
+}
+
+#ifdef DHD_DEBUG
+extern int
+dhd_bus_console_in(dhd_pub_t *dhdp, uchar *msg, uint msglen)
+{
+ dhd_bus_t *bus = dhdp->bus;
+ uint32 addr, val;
+ int rv;
+ void *pkt;
+
+ /* Address could be zero if CONSOLE := 0 in dongle Makefile */
+ if (bus->console_addr == 0)
+ return BCME_UNSUPPORTED;
+
+ /* Exclusive bus access */
+ dhd_os_sdlock(bus->dhd);
+
+ /* Don't allow input if dongle is in reset */
+ if (bus->dhd->dongle_reset) {
+ dhd_os_sdunlock(bus->dhd);
+ return BCME_NOTREADY;
+ }
+
+ /* Request clock to allow SDIO accesses */
+ BUS_WAKE(bus);
+ /* No pend allowed since txpkt is called later, ht clk has to be on */
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+
+ /* Zero cbuf_index */
+ addr = bus->console_addr + OFFSETOF(hndrte_cons_t, cbuf_idx);
+ val = htol32(0);
+ if ((rv = dhdsdio_membytes(bus, TRUE, addr, (uint8 *)&val, sizeof(val))) < 0)
+ goto done;
+
+ /* Write message into cbuf */
+ addr = bus->console_addr + OFFSETOF(hndrte_cons_t, cbuf);
+ if ((rv = dhdsdio_membytes(bus, TRUE, addr, (uint8 *)msg, msglen)) < 0)
+ goto done;
+
+ /* Write length into vcons_in */
+ addr = bus->console_addr + OFFSETOF(hndrte_cons_t, vcons_in);
+ val = htol32(msglen);
+ if ((rv = dhdsdio_membytes(bus, TRUE, addr, (uint8 *)&val, sizeof(val))) < 0)
+ goto done;
+
+ /* Bump dongle by sending an empty event pkt.
+ * sdpcm_sendup (RX) checks for virtual console input.
+ */
+ if (((pkt = PKTGET(bus->dhd->osh, 4 + SDPCM_RESERVE, TRUE)) != NULL) &&
+ bus->clkstate == CLK_AVAIL)
+ dhdsdio_txpkt(bus, pkt, SDPCM_EVENT_CHANNEL, TRUE);
+
+done:
+ if ((bus->idletime == DHD_IDLE_IMMEDIATE) && !bus->dpc_sched) {
+ bus->activity = FALSE;
+ dhdsdio_clkctl(bus, CLK_NONE, TRUE);
+ }
+
+ dhd_os_sdunlock(bus->dhd);
+
+ return rv;
+}
+#endif /* DHD_DEBUG */
+
+#ifdef DHD_DEBUG
+static void
+dhd_dump_cis(uint fn, uint8 *cis)
+{
+ uint byte, tag, tdata;
+ DHD_INFO(("Function %d CIS:\n", fn));
+
+ for (tdata = byte = 0; byte < SBSDIO_CIS_SIZE_LIMIT; byte++) {
+ if ((byte % 16) == 0)
+ DHD_INFO((" "));
+ DHD_INFO(("%02x ", cis[byte]));
+ if ((byte % 16) == 15)
+ DHD_INFO(("\n"));
+ if (!tdata--) {
+ tag = cis[byte];
+ if (tag == 0xff)
+ break;
+ else if (!tag)
+ tdata = 0;
+ else if ((byte + 1) < SBSDIO_CIS_SIZE_LIMIT)
+ tdata = cis[byte + 1] + 1;
+ else
+ DHD_INFO(("]"));
+ }
+ }
+ if ((byte % 16) != 15)
+ DHD_INFO(("\n"));
+}
+#endif /* DHD_DEBUG */
+
+static bool
+dhdsdio_chipmatch(uint16 chipid)
+{
+ if (chipid == BCM4325_CHIP_ID)
+ return TRUE;
+ if (chipid == BCM4329_CHIP_ID)
+ return TRUE;
+ if (chipid == BCM4315_CHIP_ID)
+ return TRUE;
+ if (chipid == BCM4319_CHIP_ID)
+ return TRUE;
+ return FALSE;
+}
+
+static void *
+dhdsdio_probe(uint16 venid, uint16 devid, uint16 bus_no, uint16 slot,
+ uint16 func, uint bustype, void *regsva, osl_t * osh, void *sdh)
+{
+ int ret;
+ dhd_bus_t *bus;
+
+ /* Init global variables at run-time, not as part of the declaration.
+ * This is required to support init/de-init of the driver. Initialization
+ * of globals as part of the declaration results in non-deterministic
+ * behavior since the value of the globals may be different on the
+ * first time that the driver is initialized vs subsequent initializations.
+ */
+ dhd_txbound = DHD_TXBOUND;
+ dhd_rxbound = DHD_RXBOUND;
+ dhd_alignctl = TRUE;
+ sd1idle = TRUE;
+ dhd_readahead = TRUE;
+ retrydata = FALSE;
+ dhd_doflow = FALSE;
+ dhd_dongle_memsize = 0;
+ dhd_txminmax = DHD_TXMINMAX;
+
+ forcealign = TRUE;
+
+
+ dhd_common_init();
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+ DHD_INFO(("%s: venid 0x%04x devid 0x%04x\n", __FUNCTION__, venid, devid));
+
+ /* We make assumptions about address window mappings */
+ ASSERT((uintptr)regsva == SI_ENUM_BASE);
+
+ /* BCMSDH passes venid and devid based on CIS parsing -- but low-power start
+ * means early parse could fail, so here we should get either an ID
+ * we recognize OR (-1) indicating we must request power first.
+ */
+ /* Check the Vendor ID */
+ switch (venid) {
+ case 0x0000:
+ case VENDOR_BROADCOM:
+ break;
+ default:
+ DHD_ERROR(("%s: unknown vendor: 0x%04x\n",
+ __FUNCTION__, venid));
+ return NULL;
+ }
+
+ /* Check the Device ID and make sure it's one that we support */
+ switch (devid) {
+ case BCM4325_D11DUAL_ID: /* 4325 802.11a/g id */
+ case BCM4325_D11G_ID: /* 4325 802.11g 2.4Ghz band id */
+ case BCM4325_D11A_ID: /* 4325 802.11a 5Ghz band id */
+ DHD_INFO(("%s: found 4325 Dongle\n", __FUNCTION__));
+ break;
+ case BCM4329_D11NDUAL_ID: /* 4329 802.11n dualband device */
+ case BCM4329_D11N2G_ID: /* 4329 802.11n 2.4G device */
+ case BCM4329_D11N5G_ID: /* 4329 802.11n 5G device */
+ case 0x4329:
+ DHD_INFO(("%s: found 4329 Dongle\n", __FUNCTION__));
+ break;
+ case BCM4315_D11DUAL_ID: /* 4315 802.11a/g id */
+ case BCM4315_D11G_ID: /* 4315 802.11g id */
+ case BCM4315_D11A_ID: /* 4315 802.11a id */
+ DHD_INFO(("%s: found 4315 Dongle\n", __FUNCTION__));
+ break;
+ case BCM4319_D11N_ID: /* 4319 802.11n id */
+ case BCM4319_D11N2G_ID: /* 4319 802.11n2g id */
+ case BCM4319_D11N5G_ID: /* 4319 802.11n5g id */
+ DHD_INFO(("%s: found 4319 Dongle\n", __FUNCTION__));
+ break;
+ case 0:
+ DHD_INFO(("%s: allow device id 0, will check chip internals\n",
+ __FUNCTION__));
+ break;
+
+ default:
+ DHD_ERROR(("%s: skipping 0x%04x/0x%04x, not a dongle\n",
+ __FUNCTION__, venid, devid));
+ return NULL;
+ }
+
+ if (osh == NULL) {
+ /* Ask the OS interface part for an OSL handle */
+ if (!(osh = dhd_osl_attach(sdh, DHD_BUS))) {
+ DHD_ERROR(("%s: osl_attach failed!\n", __FUNCTION__));
+ return NULL;
+ }
+ }
+
+ /* Allocate private bus interface state */
+ if (!(bus = MALLOC(osh, sizeof(dhd_bus_t)))) {
+ DHD_ERROR(("%s: MALLOC of dhd_bus_t failed\n", __FUNCTION__));
+ goto fail;
+ }
+ bzero(bus, sizeof(dhd_bus_t));
+ bus->sdh = sdh;
+ bus->cl_devid = (uint16)devid;
+ bus->bus = DHD_BUS;
+ bus->tx_seq = SDPCM_SEQUENCE_WRAP - 1;
+ bus->usebufpool = FALSE; /* Use bufpool if allocated, else use locally malloced rxbuf */
+
+ /* attempt to attach to the dongle */
+ if (!(dhdsdio_probe_attach(bus, osh, sdh, regsva, devid))) {
+ DHD_ERROR(("%s: dhdsdio_probe_attach failed\n", __FUNCTION__));
+ goto fail;
+ }
+
+ /* Attach to the dhd/OS/network interface */
+ if (!(bus->dhd = dhd_attach(osh, bus, SDPCM_RESERVE))) {
+ DHD_ERROR(("%s: dhd_attach failed\n", __FUNCTION__));
+ goto fail;
+ }
+
+ /* Allocate buffers */
+ if (!(dhdsdio_probe_malloc(bus, osh, sdh))) {
+ DHD_ERROR(("%s: dhdsdio_probe_malloc failed\n", __FUNCTION__));
+ goto fail;
+ }
+
+ if (!(dhdsdio_probe_init(bus, osh, sdh))) {
+ DHD_ERROR(("%s: dhdsdio_probe_init failed\n", __FUNCTION__));
+ goto fail;
+ }
+
+ /* Register interrupt callback, but mask it (not operational yet). */
+ DHD_INTR(("%s: disable SDIO interrupts (not interested yet)\n", __FUNCTION__));
+ bcmsdh_intr_disable(sdh);
+ if ((ret = bcmsdh_intr_reg(sdh, dhdsdio_isr, bus)) != 0) {
+ DHD_ERROR(("%s: FAILED: bcmsdh_intr_reg returned %d\n",
+ __FUNCTION__, ret));
+ goto fail;
+ }
+ DHD_INTR(("%s: registered SDIO interrupt function ok\n", __FUNCTION__));
+
+ DHD_INFO(("%s: completed!!\n", __FUNCTION__));
+
+
+ /* if firmware path present try to download and bring up bus */
+ if ((ret = dhd_bus_start(bus->dhd)) != 0) {
+#if 1
+ DHD_ERROR(("%s: failed\n", __FUNCTION__));
+ goto fail;
+#else
+ if (ret == BCME_NOTUP) {
+ DHD_ERROR(("%s: dongle is not responding\n", __FUNCTION__));
+ goto fail;
+ }
+#endif
+ }
+ /* Ok, have the per-port tell the stack we're open for business */
+ if (dhd_net_attach(bus->dhd, 0) != 0) {
+ DHD_ERROR(("%s: Net attach failed!!\n", __FUNCTION__));
+ goto fail;
+ }
+
+ return bus;
+
+fail:
+ dhdsdio_release(bus, osh);
+ return NULL;
+}
+
+
+static bool
+dhdsdio_probe_attach(struct dhd_bus *bus, osl_t *osh, void *sdh, void *regsva,
+ uint16 devid)
+{
+ uint8 clkctl = 0;
+ int err = 0;
+
+ bus->alp_only = TRUE;
+
+ /* Return the window to backplane enumeration space for core access */
+ if (dhdsdio_set_siaddr_window(bus, SI_ENUM_BASE)) {
+ DHD_ERROR(("%s: FAILED to return to SI_ENUM_BASE\n", __FUNCTION__));
+ }
+
+#ifdef DHD_DEBUG
+ printf("F1 signature read @0x18000000=0x%4x\n",
+ bcmsdh_reg_read(bus->sdh, SI_ENUM_BASE, 4));
+
+
+#endif /* DHD_DEBUG */
+
+
+ /* Force PLL off until si_attach() programs PLL control regs */
+
+
+
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, DHD_INIT_CLKCTL1, &err);
+ if (!err)
+ clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, &err);
+
+ if (err || ((clkctl & ~SBSDIO_AVBITS) != DHD_INIT_CLKCTL1)) {
+ DHD_ERROR(("dhdsdio_probe: ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
+ err, DHD_INIT_CLKCTL1, clkctl));
+ goto fail;
+ }
+
+
+#ifdef DHD_DEBUG
+ if (DHD_INFO_ON()) {
+ uint fn, numfn;
+ uint8 *cis[SDIOD_MAX_IOFUNCS];
+ int err = 0;
+
+ numfn = bcmsdh_query_iofnum(sdh);
+ ASSERT(numfn <= SDIOD_MAX_IOFUNCS);
+
+ /* Make sure ALP is available before trying to read CIS */
+ SPINWAIT(((clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
+ SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
+ !SBSDIO_ALPAV(clkctl)), PMU_MAX_TRANSITION_DLY);
+
+ /* Now request ALP be put on the bus */
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR,
+ DHD_INIT_CLKCTL2, &err);
+ OSL_DELAY(65);
+
+ for (fn = 0; fn <= numfn; fn++) {
+ if (!(cis[fn] = MALLOC(osh, SBSDIO_CIS_SIZE_LIMIT))) {
+ DHD_INFO(("dhdsdio_probe: fn %d cis malloc failed\n", fn));
+ break;
+ }
+ bzero(cis[fn], SBSDIO_CIS_SIZE_LIMIT);
+
+ if ((err = bcmsdh_cis_read(sdh, fn, cis[fn], SBSDIO_CIS_SIZE_LIMIT))) {
+ DHD_INFO(("dhdsdio_probe: fn %d cis read err %d\n", fn, err));
+ MFREE(osh, cis[fn], SBSDIO_CIS_SIZE_LIMIT);
+ break;
+ }
+ dhd_dump_cis(fn, cis[fn]);
+ }
+
+ while (fn-- > 0) {
+ ASSERT(cis[fn]);
+ MFREE(osh, cis[fn], SBSDIO_CIS_SIZE_LIMIT);
+ }
+
+ if (err) {
+ DHD_ERROR(("dhdsdio_probe: failure reading or parsing CIS\n"));
+ goto fail;
+ }
+ }
+#endif /* DHD_DEBUG */
+
+ /* si_attach() will provide an SI handle and scan the backplane */
+ if (!(bus->sih = si_attach((uint)devid, osh, regsva, DHD_BUS, sdh,
+ &bus->vars, &bus->varsz))) {
+ DHD_ERROR(("%s: si_attach failed!\n", __FUNCTION__));
+ goto fail;
+ }
+
+ bcmsdh_chipinfo(sdh, bus->sih->chip, bus->sih->chiprev);
+
+ if (!dhdsdio_chipmatch((uint16)bus->sih->chip)) {
+ DHD_ERROR(("%s: unsupported chip: 0x%04x\n",
+ __FUNCTION__, bus->sih->chip));
+ goto fail;
+ }
+
+ si_sdiod_drive_strength_init(bus->sih, osh, dhd_sdiod_drive_strength);
+
+
+ /* Get info on the ARM and SOCRAM cores... */
+ if (!DHD_NOPMU(bus)) {
+ if ((si_setcore(bus->sih, ARM7S_CORE_ID, 0)) ||
+ (si_setcore(bus->sih, ARMCM3_CORE_ID, 0))) {
+ bus->armrev = si_corerev(bus->sih);
+ } else {
+ DHD_ERROR(("%s: failed to find ARM core!\n", __FUNCTION__));
+ goto fail;
+ }
+ if (!(bus->orig_ramsize = si_socram_size(bus->sih))) {
+ DHD_ERROR(("%s: failed to find SOCRAM memory!\n", __FUNCTION__));
+ goto fail;
+ }
+ bus->ramsize = bus->orig_ramsize;
+ if (dhd_dongle_memsize)
+ dhd_dongle_setmemsize(bus, dhd_dongle_memsize);
+
+ DHD_ERROR(("DHD: dongle ram size is set to %d(orig %d)\n",
+ bus->ramsize, bus->orig_ramsize));
+ }
+
+ /* ...but normally deal with the SDPCMDEV core */
+ if (!(bus->regs = si_setcore(bus->sih, PCMCIA_CORE_ID, 0)) &&
+ !(bus->regs = si_setcore(bus->sih, SDIOD_CORE_ID, 0))) {
+ DHD_ERROR(("%s: failed to find SDIODEV core!\n", __FUNCTION__));
+ goto fail;
+ }
+ bus->sdpcmrev = si_corerev(bus->sih);
+
+ /* Set core control so an SDIO reset does a backplane reset */
+ OR_REG(osh, &bus->regs->corecontrol, CC_BPRESEN);
+
+ pktq_init(&bus->txq, (PRIOMASK + 1), QLEN);
+
+ /* Locate an appropriately-aligned portion of hdrbuf */
+ bus->rxhdr = (uint8 *)ROUNDUP((uintptr)&bus->hdrbuf[0], DHD_SDALIGN);
+
+ /* Set the poll and/or interrupt flags */
+ bus->intr = (bool)dhd_intr;
+ if ((bus->poll = (bool)dhd_poll))
+ bus->pollrate = 1;
+
+ return TRUE;
+
+fail:
+ return FALSE;
+}
+
+static bool
+dhdsdio_probe_malloc(dhd_bus_t *bus, osl_t *osh, void *sdh)
+{
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+#ifndef DHD_USE_STATIC_BUF
+ if (bus->dhd->maxctl) {
+ bus->rxblen = ROUNDUP((bus->dhd->maxctl + SDPCM_HDRLEN), ALIGNMENT) + DHD_SDALIGN;
+ if (!(bus->rxbuf = MALLOC(osh, bus->rxblen))) {
+ DHD_ERROR(("%s: MALLOC of %d-byte rxbuf failed\n",
+ __FUNCTION__, bus->rxblen));
+ goto fail;
+ }
+ }
+
+ /* Allocate buffer to receive glomed packet */
+ if (!(bus->databuf = MALLOC(osh, MAX_DATA_BUF))) {
+ DHD_ERROR(("%s: MALLOC of %d-byte databuf failed\n",
+ __FUNCTION__, MAX_DATA_BUF));
+ /* release rxbuf which was already located as above */
+ if (!bus->rxblen) MFREE(osh, bus->rxbuf, bus->rxblen);
+ goto fail;
+ }
+#else
+ if (bus->dhd->maxctl) {
+ bus->rxblen = ROUNDUP((bus->dhd->maxctl + SDPCM_HDRLEN), ALIGNMENT) + DHD_SDALIGN;
+ if (!(bus->rxbuf = dhd_os_prealloc(DHD_PREALLOC_RXBUF, bus->rxblen))) {
+ DHD_ERROR(("%s: MALLOC of %d-byte rxbuf failed\n",
+ __FUNCTION__, bus->rxblen));
+ goto fail;
+ }
+ }
+ /* Allocate buffer to receive glomed packet */
+ if (!(bus->databuf = dhd_os_prealloc(DHD_PREALLOC_DATABUF, MAX_DATA_BUF))) {
+ DHD_ERROR(("%s: MALLOC of %d-byte databuf failed\n",
+ __FUNCTION__, MAX_DATA_BUF));
+ goto fail;
+ }
+#endif /* DHD_USE_STATIC_BUF */
+
+ /* Align the buffer */
+ if ((uintptr)bus->databuf % DHD_SDALIGN)
+ bus->dataptr = bus->databuf + (DHD_SDALIGN - ((uintptr)bus->databuf % DHD_SDALIGN));
+ else
+ bus->dataptr = bus->databuf;
+
+ return TRUE;
+
+fail:
+ return FALSE;
+}
+
+
+static bool
+dhdsdio_probe_init(dhd_bus_t *bus, osl_t *osh, void *sdh)
+{
+ int32 fnum;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+#ifdef SDTEST
+ dhdsdio_pktgen_init(bus);
+#endif /* SDTEST */
+
+ /* Disable F2 to clear any intermediate frame state on the dongle */
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, SDIO_FUNC_ENABLE_1, NULL);
+
+ bus->dhd->busstate = DHD_BUS_DOWN;
+ bus->sleeping = FALSE;
+ bus->rxflow = FALSE;
+ bus->prev_rxlim_hit = 0;
+
+
+ /* Done with backplane-dependent accesses, can drop clock... */
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
+
+ /* ...and initialize clock/power states */
+ bus->clkstate = CLK_SDONLY;
+ bus->idletime = (int32)dhd_idletime;
+ bus->idleclock = DHD_IDLE_ACTIVE;
+
+ /* Query the SD clock speed */
+ if (bcmsdh_iovar_op(sdh, "sd_divisor", NULL, 0,
+ &bus->sd_divisor, sizeof(int32), FALSE) != BCME_OK) {
+ DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, "sd_divisor"));
+ bus->sd_divisor = -1;
+ } else {
+ DHD_INFO(("%s: Initial value for %s is %d\n",
+ __FUNCTION__, "sd_divisor", bus->sd_divisor));
+ }
+
+ /* Query the SD bus mode */
+ if (bcmsdh_iovar_op(sdh, "sd_mode", NULL, 0,
+ &bus->sd_mode, sizeof(int32), FALSE) != BCME_OK) {
+ DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, "sd_mode"));
+ bus->sd_mode = -1;
+ } else {
+ DHD_INFO(("%s: Initial value for %s is %d\n",
+ __FUNCTION__, "sd_mode", bus->sd_mode));
+ }
+
+ /* Query the F2 block size, set roundup accordingly */
+ fnum = 2;
+ if (bcmsdh_iovar_op(sdh, "sd_blocksize", &fnum, sizeof(int32),
+ &bus->blocksize, sizeof(int32), FALSE) != BCME_OK) {
+ bus->blocksize = 0;
+ DHD_ERROR(("%s: fail on %s get\n", __FUNCTION__, "sd_blocksize"));
+ } else {
+ DHD_INFO(("%s: Initial value for %s is %d\n",
+ __FUNCTION__, "sd_blocksize", bus->blocksize));
+ }
+ bus->roundup = MIN(max_roundup, bus->blocksize);
+
+ /* Query if bus module supports packet chaining, default to use if supported */
+ if (bcmsdh_iovar_op(sdh, "sd_rxchain", NULL, 0,
+ &bus->sd_rxchain, sizeof(int32), FALSE) != BCME_OK) {
+ bus->sd_rxchain = FALSE;
+ } else {
+ DHD_INFO(("%s: bus module (through bcmsdh API) %s chaining\n",
+ __FUNCTION__, (bus->sd_rxchain ? "supports" : "does not support")));
+ }
+ bus->use_rxchain = (bool)bus->sd_rxchain;
+
+ return TRUE;
+}
+
+bool
+dhd_bus_download_firmware(struct dhd_bus *bus, osl_t *osh,
+ char *fw_path, char *nv_path)
+{
+ bool ret;
+ bus->fw_path = fw_path;
+ bus->nv_path = nv_path;
+
+ ret = dhdsdio_download_firmware(bus, osh, bus->sdh);
+
+ return ret;
+}
+
+static bool
+dhdsdio_download_firmware(struct dhd_bus *bus, osl_t *osh, void *sdh)
+{
+ bool ret;
+
+ /* Download the firmware */
+ dhd_os_wake_lock(bus->dhd);
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+
+ ret = _dhdsdio_download_firmware(bus) == 0;
+
+ dhdsdio_clkctl(bus, CLK_SDONLY, FALSE);
+ dhd_os_wake_unlock(bus->dhd);
+ return ret;
+}
+
+/* Detach and free everything */
+static void
+dhdsdio_release(dhd_bus_t *bus, osl_t *osh)
+{
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (bus) {
+ ASSERT(osh);
+
+
+ /* De-register interrupt handler */
+ bcmsdh_intr_disable(bus->sdh);
+ bcmsdh_intr_dereg(bus->sdh);
+
+ if (bus->dhd) {
+
+ dhdsdio_release_dongle(bus, osh, TRUE);
+
+ dhd_detach(bus->dhd);
+ bus->dhd = NULL;
+ }
+
+ dhdsdio_release_malloc(bus, osh);
+
+
+ MFREE(osh, bus, sizeof(dhd_bus_t));
+ }
+
+ if (osh)
+ dhd_osl_detach(osh);
+
+ DHD_TRACE(("%s: Disconnected\n", __FUNCTION__));
+}
+
+static void
+dhdsdio_release_malloc(dhd_bus_t *bus, osl_t *osh)
+{
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (bus->dhd && bus->dhd->dongle_reset)
+ return;
+
+ if (bus->rxbuf) {
+#ifndef DHD_USE_STATIC_BUF
+ MFREE(osh, bus->rxbuf, bus->rxblen);
+#endif
+ bus->rxctl = bus->rxbuf = NULL;
+ bus->rxlen = 0;
+ }
+
+ if (bus->databuf) {
+#ifndef DHD_USE_STATIC_BUF
+ MFREE(osh, bus->databuf, MAX_DATA_BUF);
+#endif
+ bus->databuf = NULL;
+ }
+}
+
+
+static void
+dhdsdio_release_dongle(dhd_bus_t *bus, osl_t *osh, int reset_flag)
+{
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if ((bus->dhd && bus->dhd->dongle_reset) && reset_flag)
+ return;
+
+ if (bus->sih) {
+ dhdsdio_clkctl(bus, CLK_AVAIL, FALSE);
+#if !defined(BCMLXSDMMC)
+ si_watchdog(bus->sih, 4);
+#endif /* !defined(BCMLXSDMMC) */
+ dhdsdio_clkctl(bus, CLK_NONE, FALSE);
+ si_detach(bus->sih);
+ if (bus->vars && bus->varsz)
+ MFREE(osh, bus->vars, bus->varsz);
+ bus->vars = NULL;
+ }
+
+ DHD_TRACE(("%s: Disconnected\n", __FUNCTION__));
+}
+
+static void
+dhdsdio_disconnect(void *ptr)
+{
+ dhd_bus_t *bus = (dhd_bus_t *)ptr;
+
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ if (bus) {
+ ASSERT(bus->dhd);
+ dhdsdio_release(bus, bus->dhd->osh);
+ }
+
+ DHD_TRACE(("%s: Disconnected\n", __FUNCTION__));
+}
+
+
+/* Register/Unregister functions are called by the main DHD entry
+ * point (e.g. module insertion) to link with the bus driver, in
+ * order to look for or await the device.
+ */
+
+static bcmsdh_driver_t dhd_sdio = {
+ dhdsdio_probe,
+ dhdsdio_disconnect
+};
+
+int
+dhd_bus_register(void)
+{
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ return bcmsdh_register(&dhd_sdio);
+}
+
+void
+dhd_bus_unregister(void)
+{
+ DHD_TRACE(("%s: Enter\n", __FUNCTION__));
+
+ bcmsdh_unregister();
+}
+
+#ifdef BCMEMBEDIMAGE
+static int
+dhdsdio_download_code_array(struct dhd_bus *bus)
+{
+ int bcmerror = -1;
+ int offset = 0;
+
+ DHD_INFO(("%s: download embedded firmware...\n", __FUNCTION__));
+
+ /* Download image */
+ while ((offset + MEMBLOCK) < sizeof(dlarray)) {
+ bcmerror = dhdsdio_membytes(bus, TRUE, offset, dlarray + offset, MEMBLOCK);
+ if (bcmerror) {
+ DHD_ERROR(("%s: error %d on writing %d membytes at 0x%08x\n",
+ __FUNCTION__, bcmerror, MEMBLOCK, offset));
+ goto err;
+ }
+
+ offset += MEMBLOCK;
+ }
+
+ if (offset < sizeof(dlarray)) {
+ bcmerror = dhdsdio_membytes(bus, TRUE, offset,
+ dlarray + offset, sizeof(dlarray) - offset);
+ if (bcmerror) {
+ DHD_ERROR(("%s: error %d on writing %d membytes at 0x%08x\n",
+ __FUNCTION__, bcmerror, sizeof(dlarray) - offset, offset));
+ goto err;
+ }
+ }
+
+#ifdef DHD_DEBUG
+ /* Upload and compare the downloaded code */
+ {
+ unsigned char *ularray;
+
+ ularray = MALLOC(bus->dhd->osh, bus->ramsize);
+ /* Upload image to verify downloaded contents. */
+ offset = 0;
+ memset(ularray, 0xaa, bus->ramsize);
+ while ((offset + MEMBLOCK) < sizeof(dlarray)) {
+ bcmerror = dhdsdio_membytes(bus, FALSE, offset, ularray + offset, MEMBLOCK);
+ if (bcmerror) {
+ DHD_ERROR(("%s: error %d on reading %d membytes at 0x%08x\n",
+ __FUNCTION__, bcmerror, MEMBLOCK, offset));
+ goto err;
+ }
+
+ offset += MEMBLOCK;
+ }
+
+ if (offset < sizeof(dlarray)) {
+ bcmerror = dhdsdio_membytes(bus, FALSE, offset,
+ ularray + offset, sizeof(dlarray) - offset);
+ if (bcmerror) {
+ DHD_ERROR(("%s: error %d on reading %d membytes at 0x%08x\n",
+ __FUNCTION__, bcmerror, sizeof(dlarray) - offset, offset));
+ goto err;
+ }
+ }
+
+ if (memcmp(dlarray, ularray, sizeof(dlarray))) {
+ DHD_ERROR(("%s: Downloaded image is corrupted.\n", __FUNCTION__));
+ ASSERT(0);
+ goto err;
+ } else
+ DHD_ERROR(("%s: Download, Upload and compare succeeded.\n", __FUNCTION__));
+
+ MFREE(bus->dhd->osh, ularray, bus->ramsize);
+ }
+#endif /* DHD_DEBUG */
+
+err:
+ return bcmerror;
+}
+#endif /* BCMEMBEDIMAGE */
+
+static int
+dhdsdio_download_code_file(struct dhd_bus *bus, char *fw_path)
+{
+ int bcmerror = -1;
+ int offset = 0;
+ uint len;
+ void *image = NULL;
+ uint8 *memblock = NULL, *memptr;
+
+ DHD_INFO(("%s: download firmware %s\n", __FUNCTION__, fw_path));
+
+ image = dhd_os_open_image(fw_path);
+ if (image == NULL)
+ goto err;
+
+ memptr = memblock = MALLOC(bus->dhd->osh, MEMBLOCK + DHD_SDALIGN);
+ if (memblock == NULL) {
+ DHD_ERROR(("%s: Failed to allocate memory %d bytes\n", __FUNCTION__, MEMBLOCK));
+ goto err;
+ }
+ if ((uint32)(uintptr)memblock % DHD_SDALIGN)
+ memptr += (DHD_SDALIGN - ((uint32)(uintptr)memblock % DHD_SDALIGN));
+
+ /* Download image */
+ while ((len = dhd_os_get_image_block((char*)memptr, MEMBLOCK, image))) {
+ bcmerror = dhdsdio_membytes(bus, TRUE, offset, memptr, len);
+ if (bcmerror) {
+ DHD_ERROR(("%s: error %d on writing %d membytes at 0x%08x\n",
+ __FUNCTION__, bcmerror, MEMBLOCK, offset));
+ goto err;
+ }
+
+ offset += MEMBLOCK;
+ }
+
+err:
+ if (memblock)
+ MFREE(bus->dhd->osh, memblock, MEMBLOCK + DHD_SDALIGN);
+
+ if (image)
+ dhd_os_close_image(image);
+
+ return bcmerror;
+}
+
+/*
+ * ProcessVars:Takes a buffer of "<var>=<value>\n" lines read from a file and ending in a NUL.
+ * Removes carriage returns, empty lines, comment lines, and converts newlines to NULs.
+ * Shortens buffer as needed and pads with NULs. End of buffer is marked by two NULs.
+*/
+
+static uint
+process_nvram_vars(char *varbuf, uint len)
+{
+ char *dp;
+ bool findNewline;
+ int column;
+ uint buf_len, n;
+
+ dp = varbuf;
+
+ findNewline = FALSE;
+ column = 0;
+
+ for (n = 0; n < len; n++) {
+ if (varbuf[n] == 0)
+ break;
+ if (varbuf[n] == '\r')
+ continue;
+ if (findNewline && varbuf[n] != '\n')
+ continue;
+ findNewline = FALSE;
+ if (varbuf[n] == '#') {
+ findNewline = TRUE;
+ continue;
+ }
+ if (varbuf[n] == '\n') {
+ if (column == 0)
+ continue;
+ *dp++ = 0;
+ column = 0;
+ continue;
+ }
+ *dp++ = varbuf[n];
+ column++;
+ }
+ buf_len = dp - varbuf;
+
+ while (dp < varbuf + n)
+ *dp++ = 0;
+
+ return buf_len;
+}
+
+/*
+ EXAMPLE: nvram_array
+ nvram_arry format:
+ name=value
+ Use carriage return at the end of each assignment, and an empty string with
+ carriage return at the end of array.
+
+ For example:
+ unsigned char nvram_array[] = {"name1=value1\n", "name2=value2\n", "\n"};
+ Hex values start with 0x, and mac addr format: xx:xx:xx:xx:xx:xx.
+
+ Search "EXAMPLE: nvram_array" to see how the array is activated.
+*/
+
+void
+dhd_bus_set_nvram_params(struct dhd_bus * bus, const char *nvram_params)
+{
+ bus->nvram_params = nvram_params;
+}
+
+static int
+dhdsdio_download_nvram(struct dhd_bus *bus)
+{
+ int bcmerror = -1;
+ uint len;
+ void * image = NULL;
+ char * memblock = NULL;
+ char *bufp;
+ char *nv_path;
+ bool nvram_file_exists;
+
+ nv_path = bus->nv_path;
+
+ nvram_file_exists = ((nv_path != NULL) && (nv_path[0] != '\0'));
+ if (!nvram_file_exists && (bus->nvram_params == NULL))
+ return (0);
+
+ if (nvram_file_exists) {
+ image = dhd_os_open_image(nv_path);
+ if (image == NULL)
+ goto err;
+ }
+
+ memblock = MALLOC(bus->dhd->osh, MEMBLOCK);
+ if (memblock == NULL) {
+ DHD_ERROR(("%s: Failed to allocate memory %d bytes\n",
+ __FUNCTION__, MEMBLOCK));
+ goto err;
+ }
+
+ /* Download variables */
+ if (nvram_file_exists) {
+ len = dhd_os_get_image_block(memblock, MEMBLOCK, image);
+ }
+ else {
+ len = strlen(bus->nvram_params);
+ ASSERT(len <= MEMBLOCK);
+ if (len > MEMBLOCK)
+ len = MEMBLOCK;
+ memcpy(memblock, bus->nvram_params, len);
+ }
+
+ if (len > 0 && len < MEMBLOCK) {
+ bufp = (char *)memblock;
+ bufp[len] = 0;
+ len = process_nvram_vars(bufp, len);
+ bufp += len;
+ *bufp++ = 0;
+ if (len)
+ bcmerror = dhdsdio_downloadvars(bus, memblock, len + 1);
+ if (bcmerror) {
+ DHD_ERROR(("%s: error downloading vars: %d\n",
+ __FUNCTION__, bcmerror));
+ }
+ }
+ else {
+ DHD_ERROR(("%s: error reading nvram file: %d\n",
+ __FUNCTION__, len));
+ bcmerror = BCME_SDIO_ERROR;
+ }
+
+err:
+ if (memblock)
+ MFREE(bus->dhd->osh, memblock, MEMBLOCK);
+
+ if (image)
+ dhd_os_close_image(image);
+
+ return bcmerror;
+}
+
+static int
+_dhdsdio_download_firmware(struct dhd_bus *bus)
+{
+ int bcmerror = -1;
+
+ bool embed = FALSE; /* download embedded firmware */
+ bool dlok = FALSE; /* download firmware succeeded */
+
+ /* Out immediately if no image to download */
+ if ((bus->fw_path == NULL) || (bus->fw_path[0] == '\0')) {
+#ifdef BCMEMBEDIMAGE
+ embed = TRUE;
+#else
+ return bcmerror;
+#endif
+ }
+
+ /* Keep arm in reset */
+ if (dhdsdio_download_state(bus, TRUE)) {
+ DHD_ERROR(("%s: error placing ARM core in reset\n", __FUNCTION__));
+ goto err;
+ }
+
+ /* External image takes precedence if specified */
+ if ((bus->fw_path != NULL) && (bus->fw_path[0] != '\0')) {
+ if (dhdsdio_download_code_file(bus, bus->fw_path)) {
+ DHD_ERROR(("%s: dongle image file download failed\n", __FUNCTION__));
+#ifdef BCMEMBEDIMAGE
+ embed = TRUE;
+#else
+ goto err;
+#endif
+ }
+ else {
+ embed = FALSE;
+ dlok = TRUE;
+ }
+ }
+#ifdef BCMEMBEDIMAGE
+ if (embed) {
+ if (dhdsdio_download_code_array(bus)) {
+ DHD_ERROR(("%s: dongle image array download failed\n", __FUNCTION__));
+ goto err;
+ }
+ else {
+ dlok = TRUE;
+ }
+ }
+#endif
+ if (!dlok) {
+ DHD_ERROR(("%s: dongle image download failed\n", __FUNCTION__));
+ goto err;
+ }
+
+ /* EXAMPLE: nvram_array */
+ /* If a valid nvram_arry is specified as above, it can be passed down to dongle */
+ /* dhd_bus_set_nvram_params(bus, (char *)&nvram_array); */
+
+ /* External nvram takes precedence if specified */
+ if (dhdsdio_download_nvram(bus)) {
+ DHD_ERROR(("%s: dongle nvram file download failed\n", __FUNCTION__));
+ }
+
+ /* Take arm out of reset */
+ if (dhdsdio_download_state(bus, FALSE)) {
+ DHD_ERROR(("%s: error getting out of ARM core reset\n", __FUNCTION__));
+ goto err;
+ }
+
+ bcmerror = 0;
+
+err:
+ return bcmerror;
+}
+
+static int
+dhd_bcmsdh_recv_buf(dhd_bus_t *bus, uint32 addr, uint fn, uint flags, uint8 *buf, uint nbytes,
+ void *pkt, bcmsdh_cmplt_fn_t complete, void *handle)
+{
+ int status;
+
+ /* 4329: GSPI check */
+ status = bcmsdh_recv_buf(bus->sdh, addr, fn, flags, buf, nbytes, pkt, complete, handle);
+ return status;
+}
+
+static int
+dhd_bcmsdh_send_buf(dhd_bus_t *bus, uint32 addr, uint fn, uint flags, uint8 *buf, uint nbytes,
+ void *pkt, bcmsdh_cmplt_fn_t complete, void *handle)
+{
+ return (bcmsdh_send_buf(bus->sdh, addr, fn, flags, buf, nbytes, pkt, complete, handle));
+}
+
+uint
+dhd_bus_chip(struct dhd_bus *bus)
+{
+ ASSERT(bus->sih != NULL);
+ return bus->sih->chip;
+}
+
+void *
+dhd_bus_pub(struct dhd_bus *bus)
+{
+ return bus->dhd;
+}
+
+void *
+dhd_bus_txq(struct dhd_bus *bus)
+{
+ return &bus->txq;
+}
+
+uint
+dhd_bus_hdrlen(struct dhd_bus *bus)
+{
+ return SDPCM_HDRLEN;
+}
+
+int
+dhd_bus_devreset(dhd_pub_t *dhdp, uint8 flag)
+{
+ int bcmerror = 0;
+ dhd_bus_t *bus;
+
+ bus = dhdp->bus;
+
+ if (flag == TRUE) {
+ if (!bus->dhd->dongle_reset) {
+ dhd_os_sdlock(dhdp);
+ /* Turning off watchdog */
+ dhd_os_wd_timer(dhdp, 0);
+#if !defined(IGNORE_ETH0_DOWN)
+ /* Force flow control as protection when stop come before ifconfig_down */
+ dhd_txflowcontrol(bus->dhd, 0, ON);
+#endif /* !defined(IGNORE_ETH0_DOWN) */
+ /* Expect app to have torn down any connection before calling */
+ /* Stop the bus, disable F2 */
+ dhd_bus_stop(bus, FALSE);
+
+ /* Clean tx/rx buffer pointers, detach from the dongle */
+ dhdsdio_release_dongle(bus, bus->dhd->osh, TRUE);
+
+ bus->dhd->dongle_reset = TRUE;
+ bus->dhd->up = FALSE;
+ dhd_os_sdunlock(dhdp);
+
+ DHD_TRACE(("%s: WLAN OFF DONE\n", __FUNCTION__));
+ /* App can now remove power from device */
+ } else
+ bcmerror = BCME_SDIO_ERROR;
+ } else {
+ /* App must have restored power to device before calling */
+
+ DHD_TRACE(("\n\n%s: == WLAN ON ==\n", __FUNCTION__));
+
+ if (bus->dhd->dongle_reset) {
+ /* Turn on WLAN */
+ dhd_os_sdlock(dhdp);
+
+ /* Reset SD client */
+ bcmsdh_reset(bus->sdh);
+
+ /* Attempt to re-attach & download */
+ if (dhdsdio_probe_attach(bus, bus->dhd->osh, bus->sdh,
+ (uint32 *)SI_ENUM_BASE,
+ bus->cl_devid)) {
+ /* Attempt to download binary to the dongle */
+ if (dhdsdio_probe_init(bus, bus->dhd->osh, bus->sdh) &&
+ dhdsdio_download_firmware(bus, bus->dhd->osh, bus->sdh)) {
+
+ /* Re-init bus, enable F2 transfer */
+ bcmerror = dhd_bus_init((dhd_pub_t *) bus->dhd, FALSE);
+ if (bcmerror == BCME_OK) {
+#if defined(OOB_INTR_ONLY)
+ dhd_enable_oob_intr(bus, TRUE);
+#endif /* defined(OOB_INTR_ONLY) */
+ bus->dhd->dongle_reset = FALSE;
+ bus->dhd->up = TRUE;
+#if !defined(IGNORE_ETH0_DOWN)
+ /* Restore flow control */
+ dhd_txflowcontrol(bus->dhd, 0, OFF);
+#endif
+ /* Turning on watchdog back */
+ dhd_os_wd_timer(dhdp, dhd_watchdog_ms);
+
+ DHD_TRACE(("%s: WLAN ON DONE\n", __FUNCTION__));
+ } else {
+ dhd_bus_stop(bus, FALSE);
+ dhdsdio_release_dongle(bus, bus->dhd->osh, FALSE);
+ }
+ } else
+ bcmerror = BCME_SDIO_ERROR;
+ } else
+ bcmerror = BCME_SDIO_ERROR;
+
+ dhd_os_sdunlock(dhdp);
+ } else {
+ bcmerror = BCME_NOTDOWN;
+ DHD_ERROR(("%s: Set DEVRESET=FALSE invoked when device is on\n",
+ __FUNCTION__));
+ bcmerror = BCME_SDIO_ERROR;
+ }
+ }
+ return bcmerror;
+}
diff --git a/drivers/net/wireless/bcm4329/dngl_stats.h b/drivers/net/wireless/bcm4329/dngl_stats.h
new file mode 100644
index 0000000..e5db54e
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/dngl_stats.h
@@ -0,0 +1,43 @@
+/*
+ * Common stats definitions for clients of dongle
+ * ports
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dngl_stats.h,v 1.2.140.3 2008/05/26 16:52:08 Exp $
+ */
+
+#ifndef _dngl_stats_h_
+#define _dngl_stats_h_
+
+typedef struct {
+ unsigned long rx_packets; /* total packets received */
+ unsigned long tx_packets; /* total packets transmitted */
+ unsigned long rx_bytes; /* total bytes received */
+ unsigned long tx_bytes; /* total bytes transmitted */
+ unsigned long rx_errors; /* bad packets received */
+ unsigned long tx_errors; /* packet transmit problems */
+ unsigned long rx_dropped; /* packets dropped by dongle */
+ unsigned long tx_dropped; /* packets dropped by dongle */
+ unsigned long multicast; /* multicast packets received */
+} dngl_stats_t;
+
+#endif /* _dngl_stats_h_ */
diff --git a/drivers/net/wireless/bcm4329/hndpmu.c b/drivers/net/wireless/bcm4329/hndpmu.c
new file mode 100644
index 0000000..307347a
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/hndpmu.c
@@ -0,0 +1,131 @@
+/*
+ * Misc utility routines for accessing PMU corerev specific features
+ * of the SiliconBackplane-based Broadcom chips.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: hndpmu.c,v 1.95.2.17.4.11.2.63 2010/07/21 13:55:09 Exp $
+ */
+
+#include <typedefs.h>
+#include <bcmdefs.h>
+#include <osl.h>
+#include <bcmutils.h>
+#include <siutils.h>
+#include <bcmdevs.h>
+#include <hndsoc.h>
+#include <sbchipc.h>
+#include <hndpmu.h>
+
+/* debug/trace */
+#define PMU_ERROR(args)
+
+#define PMU_MSG(args)
+
+
+/* SDIO Pad drive strength to select value mappings */
+typedef struct {
+ uint8 strength; /* Pad Drive Strength in mA */
+ uint8 sel; /* Chip-specific select value */
+} sdiod_drive_str_t;
+
+/* SDIO Drive Strength to sel value table for PMU Rev 1 */
+static const sdiod_drive_str_t sdiod_drive_strength_tab1[] = {
+ {4, 0x2},
+ {2, 0x3},
+ {1, 0x0},
+ {0, 0x0} };
+
+/* SDIO Drive Strength to sel value table for PMU Rev 2, 3 */
+static const sdiod_drive_str_t sdiod_drive_strength_tab2[] = {
+ {12, 0x7},
+ {10, 0x6},
+ {8, 0x5},
+ {6, 0x4},
+ {4, 0x2},
+ {2, 0x1},
+ {0, 0x0} };
+
+#define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu))
+
+void
+si_sdiod_drive_strength_init(si_t *sih, osl_t *osh, uint32 drivestrength)
+{
+ chipcregs_t *cc;
+ uint origidx, intr_val = 0;
+ sdiod_drive_str_t *str_tab = NULL;
+ uint32 str_mask = 0;
+ uint32 str_shift = 0;
+
+ if (!(sih->cccaps & CC_CAP_PMU)) {
+ return;
+ }
+
+ /* Remember original core before switch to chipc */
+ cc = (chipcregs_t *) si_switch_core(sih, CC_CORE_ID, &origidx, &intr_val);
+
+ switch (SDIOD_DRVSTR_KEY(sih->chip, sih->pmurev)) {
+ case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 1):
+ str_tab = (sdiod_drive_str_t *)&sdiod_drive_strength_tab1;
+ str_mask = 0x30000000;
+ str_shift = 28;
+ break;
+ case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 2):
+ case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 3):
+ case SDIOD_DRVSTR_KEY(BCM4315_CHIP_ID, 4):
+ str_tab = (sdiod_drive_str_t *)&sdiod_drive_strength_tab2;
+ str_mask = 0x00003800;
+ str_shift = 11;
+ break;
+
+ default:
+ PMU_MSG(("No SDIO Drive strength init done for chip %x rev %d pmurev %d\n",
+ sih->chip, sih->chiprev, sih->pmurev));
+
+ break;
+ }
+
+ if (str_tab != NULL) {
+ uint32 drivestrength_sel = 0;
+ uint32 cc_data_temp;
+ int i;
+
+ for (i = 0; str_tab[i].strength != 0; i ++) {
+ if (drivestrength >= str_tab[i].strength) {
+ drivestrength_sel = str_tab[i].sel;
+ break;
+ }
+ }
+
+ W_REG(osh, &cc->chipcontrol_addr, 1);
+ cc_data_temp = R_REG(osh, &cc->chipcontrol_data);
+ cc_data_temp &= ~str_mask;
+ drivestrength_sel <<= str_shift;
+ cc_data_temp |= drivestrength_sel;
+ W_REG(osh, &cc->chipcontrol_data, cc_data_temp);
+
+ PMU_MSG(("SDIO: %dmA drive strength selected, set to 0x%08x\n",
+ drivestrength, cc_data_temp));
+ }
+
+ /* Return to original core */
+ si_restore_core(sih, origidx, intr_val);
+}
diff --git a/drivers/net/wireless/bcm4329/include/Makefile b/drivers/net/wireless/bcm4329/include/Makefile
new file mode 100644
index 0000000..439ead1
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/Makefile
@@ -0,0 +1,21 @@
+#
+# include/Makefile
+#
+# Copyright 2005, Broadcom, Inc.
+#
+# $Id: Makefile,v 13.5 2005/02/17 19:11:31 Exp $
+#
+
+SRCBASE = ..
+
+TARGETS = epivers.h
+
+
+all release:
+ bash epivers.sh
+
+clean:
+ rm -rf ${TARGETS} *.prev
+
+
+.PHONY: all release clean
diff --git a/drivers/net/wireless/bcm4329/include/aidmp.h b/drivers/net/wireless/bcm4329/include/aidmp.h
new file mode 100644
index 0000000..a927e5d
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/aidmp.h
@@ -0,0 +1,368 @@
+/*
+ * Broadcom AMBA Interconnect definitions.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: aidmp.h,v 13.2.10.1 2008/05/07 20:32:12 Exp $
+ */
+
+
+#ifndef _AIDMP_H
+#define _AIDMP_H
+
+
+#define MFGID_ARM 0x43b
+#define MFGID_BRCM 0x4bf
+#define MFGID_MIPS 0x4a7
+
+
+#define CC_SIM 0
+#define CC_EROM 1
+#define CC_CORESIGHT 9
+#define CC_VERIF 0xb
+#define CC_OPTIMO 0xd
+#define CC_GEN 0xe
+#define CC_PRIMECELL 0xf
+
+
+#define ER_EROMENTRY 0x000
+#define ER_REMAPCONTROL 0xe00
+#define ER_REMAPSELECT 0xe04
+#define ER_MASTERSELECT 0xe10
+#define ER_ITCR 0xf00
+#define ER_ITIP 0xf04
+
+
+#define ER_TAG 0xe
+#define ER_TAG1 0x6
+#define ER_VALID 1
+#define ER_CI 0
+#define ER_MP 2
+#define ER_ADD 4
+#define ER_END 0xe
+#define ER_BAD 0xffffffff
+
+
+#define CIA_MFG_MASK 0xfff00000
+#define CIA_MFG_SHIFT 20
+#define CIA_CID_MASK 0x000fff00
+#define CIA_CID_SHIFT 8
+#define CIA_CCL_MASK 0x000000f0
+#define CIA_CCL_SHIFT 4
+
+
+#define CIB_REV_MASK 0xff000000
+#define CIB_REV_SHIFT 24
+#define CIB_NSW_MASK 0x00f80000
+#define CIB_NSW_SHIFT 19
+#define CIB_NMW_MASK 0x0007c000
+#define CIB_NMW_SHIFT 14
+#define CIB_NSP_MASK 0x00003e00
+#define CIB_NSP_SHIFT 9
+#define CIB_NMP_MASK 0x000001f0
+#define CIB_NMP_SHIFT 4
+
+
+#define MPD_MUI_MASK 0x0000ff00
+#define MPD_MUI_SHIFT 8
+#define MPD_MP_MASK 0x000000f0
+#define MPD_MP_SHIFT 4
+
+
+#define AD_ADDR_MASK 0xfffff000
+#define AD_SP_MASK 0x00000f00
+#define AD_SP_SHIFT 8
+#define AD_ST_MASK 0x000000c0
+#define AD_ST_SHIFT 6
+#define AD_ST_SLAVE 0x00000000
+#define AD_ST_BRIDGE 0x00000040
+#define AD_ST_SWRAP 0x00000080
+#define AD_ST_MWRAP 0x000000c0
+#define AD_SZ_MASK 0x00000030
+#define AD_SZ_SHIFT 4
+#define AD_SZ_4K 0x00000000
+#define AD_SZ_8K 0x00000010
+#define AD_SZ_16K 0x00000020
+#define AD_SZ_SZD 0x00000030
+#define AD_AG32 0x00000008
+#define AD_ADDR_ALIGN 0x00000fff
+#define AD_SZ_BASE 0x00001000
+
+
+#define SD_SZ_MASK 0xfffff000
+#define SD_SG32 0x00000008
+#define SD_SZ_ALIGN 0x00000fff
+
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+typedef volatile struct _aidmp {
+ uint32 oobselina30;
+ uint32 oobselina74;
+ uint32 PAD[6];
+ uint32 oobselinb30;
+ uint32 oobselinb74;
+ uint32 PAD[6];
+ uint32 oobselinc30;
+ uint32 oobselinc74;
+ uint32 PAD[6];
+ uint32 oobselind30;
+ uint32 oobselind74;
+ uint32 PAD[38];
+ uint32 oobselouta30;
+ uint32 oobselouta74;
+ uint32 PAD[6];
+ uint32 oobseloutb30;
+ uint32 oobseloutb74;
+ uint32 PAD[6];
+ uint32 oobseloutc30;
+ uint32 oobseloutc74;
+ uint32 PAD[6];
+ uint32 oobseloutd30;
+ uint32 oobseloutd74;
+ uint32 PAD[38];
+ uint32 oobsynca;
+ uint32 oobseloutaen;
+ uint32 PAD[6];
+ uint32 oobsyncb;
+ uint32 oobseloutben;
+ uint32 PAD[6];
+ uint32 oobsyncc;
+ uint32 oobseloutcen;
+ uint32 PAD[6];
+ uint32 oobsyncd;
+ uint32 oobseloutden;
+ uint32 PAD[38];
+ uint32 oobaextwidth;
+ uint32 oobainwidth;
+ uint32 oobaoutwidth;
+ uint32 PAD[5];
+ uint32 oobbextwidth;
+ uint32 oobbinwidth;
+ uint32 oobboutwidth;
+ uint32 PAD[5];
+ uint32 oobcextwidth;
+ uint32 oobcinwidth;
+ uint32 oobcoutwidth;
+ uint32 PAD[5];
+ uint32 oobdextwidth;
+ uint32 oobdinwidth;
+ uint32 oobdoutwidth;
+ uint32 PAD[37];
+ uint32 ioctrlset;
+ uint32 ioctrlclear;
+ uint32 ioctrl;
+ uint32 PAD[61];
+ uint32 iostatus;
+ uint32 PAD[127];
+ uint32 ioctrlwidth;
+ uint32 iostatuswidth;
+ uint32 PAD[62];
+ uint32 resetctrl;
+ uint32 resetstatus;
+ uint32 resetreadid;
+ uint32 resetwriteid;
+ uint32 PAD[60];
+ uint32 errlogctrl;
+ uint32 errlogdone;
+ uint32 errlogstatus;
+ uint32 errlogaddrlo;
+ uint32 errlogaddrhi;
+ uint32 errlogid;
+ uint32 errloguser;
+ uint32 errlogflags;
+ uint32 PAD[56];
+ uint32 intstatus;
+ uint32 PAD[127];
+ uint32 config;
+ uint32 PAD[63];
+ uint32 itcr;
+ uint32 PAD[3];
+ uint32 itipooba;
+ uint32 itipoobb;
+ uint32 itipoobc;
+ uint32 itipoobd;
+ uint32 PAD[4];
+ uint32 itipoobaout;
+ uint32 itipoobbout;
+ uint32 itipoobcout;
+ uint32 itipoobdout;
+ uint32 PAD[4];
+ uint32 itopooba;
+ uint32 itopoobb;
+ uint32 itopoobc;
+ uint32 itopoobd;
+ uint32 PAD[4];
+ uint32 itopoobain;
+ uint32 itopoobbin;
+ uint32 itopoobcin;
+ uint32 itopoobdin;
+ uint32 PAD[4];
+ uint32 itopreset;
+ uint32 PAD[15];
+ uint32 peripherialid4;
+ uint32 peripherialid5;
+ uint32 peripherialid6;
+ uint32 peripherialid7;
+ uint32 peripherialid0;
+ uint32 peripherialid1;
+ uint32 peripherialid2;
+ uint32 peripherialid3;
+ uint32 componentid0;
+ uint32 componentid1;
+ uint32 componentid2;
+ uint32 componentid3;
+} aidmp_t;
+
+#endif
+
+
+#define OOB_BUSCONFIG 0x020
+#define OOB_STATUSA 0x100
+#define OOB_STATUSB 0x104
+#define OOB_STATUSC 0x108
+#define OOB_STATUSD 0x10c
+#define OOB_ENABLEA0 0x200
+#define OOB_ENABLEA1 0x204
+#define OOB_ENABLEA2 0x208
+#define OOB_ENABLEA3 0x20c
+#define OOB_ENABLEB0 0x280
+#define OOB_ENABLEB1 0x284
+#define OOB_ENABLEB2 0x288
+#define OOB_ENABLEB3 0x28c
+#define OOB_ENABLEC0 0x300
+#define OOB_ENABLEC1 0x304
+#define OOB_ENABLEC2 0x308
+#define OOB_ENABLEC3 0x30c
+#define OOB_ENABLED0 0x380
+#define OOB_ENABLED1 0x384
+#define OOB_ENABLED2 0x388
+#define OOB_ENABLED3 0x38c
+#define OOB_ITCR 0xf00
+#define OOB_ITIPOOBA 0xf10
+#define OOB_ITIPOOBB 0xf14
+#define OOB_ITIPOOBC 0xf18
+#define OOB_ITIPOOBD 0xf1c
+#define OOB_ITOPOOBA 0xf30
+#define OOB_ITOPOOBB 0xf34
+#define OOB_ITOPOOBC 0xf38
+#define OOB_ITOPOOBD 0xf3c
+
+
+#define AI_OOBSELINA30 0x000
+#define AI_OOBSELINA74 0x004
+#define AI_OOBSELINB30 0x020
+#define AI_OOBSELINB74 0x024
+#define AI_OOBSELINC30 0x040
+#define AI_OOBSELINC74 0x044
+#define AI_OOBSELIND30 0x060
+#define AI_OOBSELIND74 0x064
+#define AI_OOBSELOUTA30 0x100
+#define AI_OOBSELOUTA74 0x104
+#define AI_OOBSELOUTB30 0x120
+#define AI_OOBSELOUTB74 0x124
+#define AI_OOBSELOUTC30 0x140
+#define AI_OOBSELOUTC74 0x144
+#define AI_OOBSELOUTD30 0x160
+#define AI_OOBSELOUTD74 0x164
+#define AI_OOBSYNCA 0x200
+#define AI_OOBSELOUTAEN 0x204
+#define AI_OOBSYNCB 0x220
+#define AI_OOBSELOUTBEN 0x224
+#define AI_OOBSYNCC 0x240
+#define AI_OOBSELOUTCEN 0x244
+#define AI_OOBSYNCD 0x260
+#define AI_OOBSELOUTDEN 0x264
+#define AI_OOBAEXTWIDTH 0x300
+#define AI_OOBAINWIDTH 0x304
+#define AI_OOBAOUTWIDTH 0x308
+#define AI_OOBBEXTWIDTH 0x320
+#define AI_OOBBINWIDTH 0x324
+#define AI_OOBBOUTWIDTH 0x328
+#define AI_OOBCEXTWIDTH 0x340
+#define AI_OOBCINWIDTH 0x344
+#define AI_OOBCOUTWIDTH 0x348
+#define AI_OOBDEXTWIDTH 0x360
+#define AI_OOBDINWIDTH 0x364
+#define AI_OOBDOUTWIDTH 0x368
+#define AI_IOCTRLSET 0x400
+#define AI_IOCTRLCLEAR 0x404
+#define AI_IOCTRL 0x408
+#define AI_IOSTATUS 0x500
+#define AI_IOCTRLWIDTH 0x700
+#define AI_IOSTATUSWIDTH 0x704
+#define AI_RESETCTRL 0x800
+#define AI_RESETSTATUS 0x804
+#define AI_RESETREADID 0x808
+#define AI_RESETWRITEID 0x80c
+#define AI_ERRLOGCTRL 0xa00
+#define AI_ERRLOGDONE 0xa04
+#define AI_ERRLOGSTATUS 0xa08
+#define AI_ERRLOGADDRLO 0xa0c
+#define AI_ERRLOGADDRHI 0xa10
+#define AI_ERRLOGID 0xa14
+#define AI_ERRLOGUSER 0xa18
+#define AI_ERRLOGFLAGS 0xa1c
+#define AI_INTSTATUS 0xa00
+#define AI_CONFIG 0xe00
+#define AI_ITCR 0xf00
+#define AI_ITIPOOBA 0xf10
+#define AI_ITIPOOBB 0xf14
+#define AI_ITIPOOBC 0xf18
+#define AI_ITIPOOBD 0xf1c
+#define AI_ITIPOOBAOUT 0xf30
+#define AI_ITIPOOBBOUT 0xf34
+#define AI_ITIPOOBCOUT 0xf38
+#define AI_ITIPOOBDOUT 0xf3c
+#define AI_ITOPOOBA 0xf50
+#define AI_ITOPOOBB 0xf54
+#define AI_ITOPOOBC 0xf58
+#define AI_ITOPOOBD 0xf5c
+#define AI_ITOPOOBAIN 0xf70
+#define AI_ITOPOOBBIN 0xf74
+#define AI_ITOPOOBCIN 0xf78
+#define AI_ITOPOOBDIN 0xf7c
+#define AI_ITOPRESET 0xf90
+#define AI_PERIPHERIALID4 0xfd0
+#define AI_PERIPHERIALID5 0xfd4
+#define AI_PERIPHERIALID6 0xfd8
+#define AI_PERIPHERIALID7 0xfdc
+#define AI_PERIPHERIALID0 0xfe0
+#define AI_PERIPHERIALID1 0xfe4
+#define AI_PERIPHERIALID2 0xfe8
+#define AI_PERIPHERIALID3 0xfec
+#define AI_COMPONENTID0 0xff0
+#define AI_COMPONENTID1 0xff4
+#define AI_COMPONENTID2 0xff8
+#define AI_COMPONENTID3 0xffc
+
+
+#define AIRC_RESET 1
+
+
+#define AICFG_OOB 0x00000020
+#define AICFG_IOS 0x00000010
+#define AICFG_IOC 0x00000008
+#define AICFG_TO 0x00000004
+#define AICFG_ERRL 0x00000002
+#define AICFG_RST 0x00000001
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/bcmcdc.h b/drivers/net/wireless/bcm4329/include/bcmcdc.h
new file mode 100644
index 0000000..c2a860b
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmcdc.h
@@ -0,0 +1,100 @@
+/*
+ * CDC network driver ioctl/indication encoding
+ * Broadcom 802.11abg Networking Device Driver
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmcdc.h,v 13.14.16.3.16.4 2009/04/12 16:58:45 Exp $
+ */
+#include <proto/ethernet.h>
+
+typedef struct cdc_ioctl {
+ uint32 cmd; /* ioctl command value */
+ uint32 len; /* lower 16: output buflen; upper 16: input buflen (excludes header) */
+ uint32 flags; /* flag defns given below */
+ uint32 status; /* status code returned from the device */
+} cdc_ioctl_t;
+
+/* Max valid buffer size that can be sent to the dongle */
+#define CDC_MAX_MSG_SIZE ETHER_MAX_LEN
+
+/* len field is divided into input and output buffer lengths */
+#define CDCL_IOC_OUTLEN_MASK 0x0000FFFF /* maximum or expected response length, */
+ /* excluding IOCTL header */
+#define CDCL_IOC_OUTLEN_SHIFT 0
+#define CDCL_IOC_INLEN_MASK 0xFFFF0000 /* input buffer length, excluding IOCTL header */
+#define CDCL_IOC_INLEN_SHIFT 16
+
+/* CDC flag definitions */
+#define CDCF_IOC_ERROR 0x01 /* 0=success, 1=ioctl cmd failed */
+#define CDCF_IOC_SET 0x02 /* 0=get, 1=set cmd */
+#define CDCF_IOC_IF_MASK 0xF000 /* I/F index */
+#define CDCF_IOC_IF_SHIFT 12
+#define CDCF_IOC_ID_MASK 0xFFFF0000 /* used to uniquely id an ioctl req/resp pairing */
+#define CDCF_IOC_ID_SHIFT 16 /* # of bits of shift for ID Mask */
+
+#define CDC_IOC_IF_IDX(flags) (((flags) & CDCF_IOC_IF_MASK) >> CDCF_IOC_IF_SHIFT)
+#define CDC_IOC_ID(flags) (((flags) & CDCF_IOC_ID_MASK) >> CDCF_IOC_ID_SHIFT)
+
+#define CDC_GET_IF_IDX(hdr) \
+ ((int)((((hdr)->flags) & CDCF_IOC_IF_MASK) >> CDCF_IOC_IF_SHIFT))
+#define CDC_SET_IF_IDX(hdr, idx) \
+ ((hdr)->flags = (((hdr)->flags & ~CDCF_IOC_IF_MASK) | ((idx) << CDCF_IOC_IF_SHIFT)))
+
+/*
+ * BDC header
+ *
+ * The BDC header is used on data packets to convey priority across USB.
+ */
+
+#define BDC_HEADER_LEN 4
+
+#define BDC_PROTO_VER 1 /* Protocol version */
+
+#define BDC_FLAG_VER_MASK 0xf0 /* Protocol version mask */
+#define BDC_FLAG_VER_SHIFT 4 /* Protocol version shift */
+
+#define BDC_FLAG__UNUSED 0x03 /* Unassigned */
+#define BDC_FLAG_SUM_GOOD 0x04 /* Dongle has verified good RX checksums */
+#define BDC_FLAG_SUM_NEEDED 0x08 /* Dongle needs to do TX checksums */
+
+#define BDC_PRIORITY_MASK 0x7
+
+#define BDC_FLAG2_FC_FLAG 0x10 /* flag to indicate if pkt contains */
+ /* FLOW CONTROL info only */
+#define BDC_PRIORITY_FC_SHIFT 4 /* flow control info shift */
+
+#define BDC_FLAG2_IF_MASK 0x0f /* APSTA: interface on which the packet was received */
+#define BDC_FLAG2_IF_SHIFT 0
+
+#define BDC_GET_IF_IDX(hdr) \
+ ((int)((((hdr)->flags2) & BDC_FLAG2_IF_MASK) >> BDC_FLAG2_IF_SHIFT))
+#define BDC_SET_IF_IDX(hdr, idx) \
+ ((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_IF_MASK) | ((idx) << BDC_FLAG2_IF_SHIFT)))
+
+struct bdc_header {
+ uint8 flags; /* Flags */
+ uint8 priority; /* 802.1d Priority 0:2 bits, 4:7 flow control info for usb */
+ uint8 flags2;
+ uint8 rssi;
+};
diff --git a/drivers/net/wireless/bcm4329/include/bcmdefs.h b/drivers/net/wireless/bcm4329/include/bcmdefs.h
new file mode 100644
index 0000000..f4e9946
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmdefs.h
@@ -0,0 +1,114 @@
+/*
+ * Misc system wide definitions
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: bcmdefs.h,v 13.38.4.10.2.7.6.11 2010/02/01 05:51:55 Exp $
+ */
+
+
+#ifndef _bcmdefs_h_
+#define _bcmdefs_h_
+
+#define STATIC static
+
+#define SI_BUS 0
+#define PCI_BUS 1
+#define PCMCIA_BUS 2
+#define SDIO_BUS 3
+#define JTAG_BUS 4
+#define USB_BUS 5
+#define SPI_BUS 6
+
+
+#ifdef BCMBUSTYPE
+#define BUSTYPE(bus) (BCMBUSTYPE)
+#else
+#define BUSTYPE(bus) (bus)
+#endif
+
+
+#ifdef BCMCHIPTYPE
+#define CHIPTYPE(bus) (BCMCHIPTYPE)
+#else
+#define CHIPTYPE(bus) (bus)
+#endif
+
+
+
+#if defined(BCMSPROMBUS)
+#define SPROMBUS (BCMSPROMBUS)
+#elif defined(SI_PCMCIA_SROM)
+#define SPROMBUS (PCMCIA_BUS)
+#else
+#define SPROMBUS (PCI_BUS)
+#endif
+
+
+#ifdef BCMCHIPID
+#define CHIPID(chip) (BCMCHIPID)
+#else
+#define CHIPID(chip) (chip)
+#endif
+
+
+#define DMADDR_MASK_32 0x0
+#define DMADDR_MASK_30 0xc0000000
+#define DMADDR_MASK_0 0xffffffff
+
+#define DMADDRWIDTH_30 30
+#define DMADDRWIDTH_32 32
+#define DMADDRWIDTH_63 63
+#define DMADDRWIDTH_64 64
+
+
+#define BCMEXTRAHDROOM 164
+
+
+#define BCMDONGLEHDRSZ 12
+#define BCMDONGLEPADSZ 16
+
+#define BCMDONGLEOVERHEAD (BCMDONGLEHDRSZ + BCMDONGLEPADSZ)
+
+
+
+#define BITFIELD_MASK(width) \
+ (((unsigned)1 << (width)) - 1)
+#define GFIELD(val, field) \
+ (((val) >> field ## _S) & field ## _M)
+#define SFIELD(val, field, bits) \
+ (((val) & (~(field ## _M << field ## _S))) | \
+ ((unsigned)(bits) << field ## _S))
+
+
+#ifdef BCMSMALL
+#undef BCMSPACE
+#define bcmspace FALSE
+#else
+#define BCMSPACE
+#define bcmspace TRUE
+#endif
+
+
+#define MAXSZ_NVRAM_VARS 4096
+
+#define LOCATOR_EXTERN static
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/bcmdevs.h b/drivers/net/wireless/bcm4329/include/bcmdevs.h
new file mode 100644
index 0000000..14853f1
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmdevs.h
@@ -0,0 +1,124 @@
+/*
+ * Broadcom device-specific manifest constants.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmdevs.h,v 13.172.4.5.4.10.2.36 2010/05/25 08:33:44 Exp $
+ */
+
+
+#ifndef _BCMDEVS_H
+#define _BCMDEVS_H
+
+
+#define VENDOR_EPIGRAM 0xfeda
+#define VENDOR_BROADCOM 0x14e4
+#define VENDOR_SI_IMAGE 0x1095
+#define VENDOR_TI 0x104c
+#define VENDOR_RICOH 0x1180
+#define VENDOR_JMICRON 0x197b
+
+
+#define VENDOR_BROADCOM_PCMCIA 0x02d0
+
+
+#define VENDOR_BROADCOM_SDIO 0x00BF
+
+
+#define BCM_DNGL_VID 0xa5c
+#define BCM_DNGL_BL_PID_4320 0xbd11
+#define BCM_DNGL_BL_PID_4328 0xbd12
+#define BCM_DNGL_BL_PID_4322 0xbd13
+#define BCM_DNGL_BL_PID_4325 0xbd14
+#define BCM_DNGL_BL_PID_4315 0xbd15
+#define BCM_DNGL_BL_PID_4319 0xbd16
+#define BCM_DNGL_BDC_PID 0xbdc
+
+#define BCM4325_D11DUAL_ID 0x431b
+#define BCM4325_D11G_ID 0x431c
+#define BCM4325_D11A_ID 0x431d
+#define BCM4329_D11NDUAL_ID 0x432e
+#define BCM4329_D11N2G_ID 0x432f
+#define BCM4329_D11N5G_ID 0x4330
+#define BCM4336_D11N_ID 0x4343
+#define BCM4315_D11DUAL_ID 0x4334
+#define BCM4315_D11G_ID 0x4335
+#define BCM4315_D11A_ID 0x4336
+#define BCM4319_D11N_ID 0x4337
+#define BCM4319_D11N2G_ID 0x4338
+#define BCM4319_D11N5G_ID 0x4339
+
+
+#define SDIOH_FPGA_ID 0x43f2
+#define SPIH_FPGA_ID 0x43f5
+#define BCM4710_DEVICE_ID 0x4710
+#define BCM27XX_SDIOH_ID 0x2702
+#define PCIXX21_FLASHMEDIA0_ID 0x8033
+#define PCIXX21_SDIOH0_ID 0x8034
+#define PCIXX21_FLASHMEDIA_ID 0x803b
+#define PCIXX21_SDIOH_ID 0x803c
+#define R5C822_SDIOH_ID 0x0822
+#define JMICRON_SDIOH_ID 0x2381
+
+
+#define BCM4306_CHIP_ID 0x4306
+#define BCM4311_CHIP_ID 0x4311
+#define BCM4312_CHIP_ID 0x4312
+#define BCM4315_CHIP_ID 0x4315
+#define BCM4318_CHIP_ID 0x4318
+#define BCM4319_CHIP_ID 0x4319
+#define BCM4320_CHIP_ID 0x4320
+#define BCM4321_CHIP_ID 0x4321
+#define BCM4322_CHIP_ID 0x4322
+#define BCM4325_CHIP_ID 0x4325
+#define BCM4328_CHIP_ID 0x4328
+#define BCM4329_CHIP_ID 0x4329
+#define BCM4336_CHIP_ID 0x4336
+#define BCM4402_CHIP_ID 0x4402
+#define BCM4704_CHIP_ID 0x4704
+#define BCM4710_CHIP_ID 0x4710
+#define BCM4712_CHIP_ID 0x4712
+#define BCM4785_CHIP_ID 0x4785
+#define BCM5350_CHIP_ID 0x5350
+#define BCM5352_CHIP_ID 0x5352
+#define BCM5354_CHIP_ID 0x5354
+#define BCM5365_CHIP_ID 0x5365
+
+
+
+#define BCM4303_PKG_ID 2
+#define BCM4309_PKG_ID 1
+#define BCM4712LARGE_PKG_ID 0
+#define BCM4712SMALL_PKG_ID 1
+#define BCM4712MID_PKG_ID 2
+#define BCM4328USBD11G_PKG_ID 2
+#define BCM4328USBDUAL_PKG_ID 3
+#define BCM4328SDIOD11G_PKG_ID 4
+#define BCM4328SDIODUAL_PKG_ID 5
+#define BCM4329_289PIN_PKG_ID 0
+#define BCM4329_182PIN_PKG_ID 1
+#define BCM5354E_PKG_ID 1
+#define HDLSIM5350_PKG_ID 1
+#define HDLSIM_PKG_ID 14
+#define HWSIM_PKG_ID 15
+
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/bcmendian.h b/drivers/net/wireless/bcm4329/include/bcmendian.h
new file mode 100644
index 0000000..ae46838
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmendian.h
@@ -0,0 +1,205 @@
+/*
+ * Byte order utilities
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmendian.h,v 1.31.302.1.16.1 2009/02/03 18:34:31 Exp $
+ *
+ * This file by default provides proper behavior on little-endian architectures.
+ * On big-endian architectures, IL_BIGENDIAN should be defined.
+ */
+
+
+#ifndef _BCMENDIAN_H_
+#define _BCMENDIAN_H_
+
+#include <typedefs.h>
+
+
+#define BCMSWAP16(val) \
+ ((uint16)((((uint16)(val) & (uint16)0x00ffU) << 8) | \
+ (((uint16)(val) & (uint16)0xff00U) >> 8)))
+
+
+#define BCMSWAP32(val) \
+ ((uint32)((((uint32)(val) & (uint32)0x000000ffU) << 24) | \
+ (((uint32)(val) & (uint32)0x0000ff00U) << 8) | \
+ (((uint32)(val) & (uint32)0x00ff0000U) >> 8) | \
+ (((uint32)(val) & (uint32)0xff000000U) >> 24)))
+
+
+#define BCMSWAP32BY16(val) \
+ ((uint32)((((uint32)(val) & (uint32)0x0000ffffU) << 16) | \
+ (((uint32)(val) & (uint32)0xffff0000U) >> 16)))
+
+
+static INLINE uint16
+bcmswap16(uint16 val)
+{
+ return BCMSWAP16(val);
+}
+
+static INLINE uint32
+bcmswap32(uint32 val)
+{
+ return BCMSWAP32(val);
+}
+
+static INLINE uint32
+bcmswap32by16(uint32 val)
+{
+ return BCMSWAP32BY16(val);
+}
+
+
+
+
+static INLINE void
+bcmswap16_buf(uint16 *buf, uint len)
+{
+ len = len / 2;
+
+ while (len--) {
+ *buf = bcmswap16(*buf);
+ buf++;
+ }
+}
+
+#ifndef hton16
+#ifndef IL_BIGENDIAN
+#define HTON16(i) BCMSWAP16(i)
+#define HTON32(i) BCMSWAP32(i)
+#define hton16(i) bcmswap16(i)
+#define hton32(i) bcmswap32(i)
+#define ntoh16(i) bcmswap16(i)
+#define ntoh32(i) bcmswap32(i)
+#define HTOL16(i) (i)
+#define HTOL32(i) (i)
+#define ltoh16(i) (i)
+#define ltoh32(i) (i)
+#define htol16(i) (i)
+#define htol32(i) (i)
+#else
+#define HTON16(i) (i)
+#define HTON32(i) (i)
+#define hton16(i) (i)
+#define hton32(i) (i)
+#define ntoh16(i) (i)
+#define ntoh32(i) (i)
+#define HTOL16(i) BCMSWAP16(i)
+#define HTOL32(i) BCMSWAP32(i)
+#define ltoh16(i) bcmswap16(i)
+#define ltoh32(i) bcmswap32(i)
+#define htol16(i) bcmswap16(i)
+#define htol32(i) bcmswap32(i)
+#endif
+#endif
+
+#ifndef IL_BIGENDIAN
+#define ltoh16_buf(buf, i)
+#define htol16_buf(buf, i)
+#else
+#define ltoh16_buf(buf, i) bcmswap16_buf((uint16 *)buf, i)
+#define htol16_buf(buf, i) bcmswap16_buf((uint16 *)buf, i)
+#endif
+
+
+static INLINE void
+htol16_ua_store(uint16 val, uint8 *bytes)
+{
+ bytes[0] = val & 0xff;
+ bytes[1] = val >> 8;
+}
+
+
+static INLINE void
+htol32_ua_store(uint32 val, uint8 *bytes)
+{
+ bytes[0] = val & 0xff;
+ bytes[1] = (val >> 8) & 0xff;
+ bytes[2] = (val >> 16) & 0xff;
+ bytes[3] = val >> 24;
+}
+
+
+static INLINE void
+hton16_ua_store(uint16 val, uint8 *bytes)
+{
+ bytes[0] = val >> 8;
+ bytes[1] = val & 0xff;
+}
+
+
+static INLINE void
+hton32_ua_store(uint32 val, uint8 *bytes)
+{
+ bytes[0] = val >> 24;
+ bytes[1] = (val >> 16) & 0xff;
+ bytes[2] = (val >> 8) & 0xff;
+ bytes[3] = val & 0xff;
+}
+
+#define _LTOH16_UA(cp) ((cp)[0] | ((cp)[1] << 8))
+#define _LTOH32_UA(cp) ((cp)[0] | ((cp)[1] << 8) | ((cp)[2] << 16) | ((cp)[3] << 24))
+#define _NTOH16_UA(cp) (((cp)[0] << 8) | (cp)[1])
+#define _NTOH32_UA(cp) (((cp)[0] << 24) | ((cp)[1] << 16) | ((cp)[2] << 8) | (cp)[3])
+
+
+static INLINE uint16
+ltoh16_ua(const void *bytes)
+{
+ return _LTOH16_UA((const uint8 *)bytes);
+}
+
+
+static INLINE uint32
+ltoh32_ua(const void *bytes)
+{
+ return _LTOH32_UA((const uint8 *)bytes);
+}
+
+
+static INLINE uint16
+ntoh16_ua(const void *bytes)
+{
+ return _NTOH16_UA((const uint8 *)bytes);
+}
+
+
+static INLINE uint32
+ntoh32_ua(const void *bytes)
+{
+ return _NTOH32_UA((const uint8 *)bytes);
+}
+
+#define ltoh_ua(ptr) \
+ (sizeof(*(ptr)) == sizeof(uint8) ? *(const uint8 *)ptr : \
+ sizeof(*(ptr)) == sizeof(uint16) ? _LTOH16_UA((const uint8 *)ptr) : \
+ sizeof(*(ptr)) == sizeof(uint32) ? _LTOH32_UA((const uint8 *)ptr) : \
+ 0xfeedf00d)
+
+#define ntoh_ua(ptr) \
+ (sizeof(*(ptr)) == sizeof(uint8) ? *(const uint8 *)ptr : \
+ sizeof(*(ptr)) == sizeof(uint16) ? _NTOH16_UA((const uint8 *)ptr) : \
+ sizeof(*(ptr)) == sizeof(uint32) ? _NTOH32_UA((const uint8 *)ptr) : \
+ 0xfeedf00d)
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/bcmpcispi.h b/drivers/net/wireless/bcm4329/include/bcmpcispi.h
new file mode 100644
index 0000000..7d98fb7
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmpcispi.h
@@ -0,0 +1,205 @@
+/*
+ * Broadcom PCI-SPI Host Controller Register Definitions
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmpcispi.h,v 13.11.8.3 2008/07/09 21:23:29 Exp $
+ */
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define _PADLINE(line) pad ## line
+#define _XSTR(line) _PADLINE(line)
+#define PAD _XSTR(__LINE__)
+#endif /* PAD */
+
+/*
++---------------------------------------------------------------------------+
+| |
+| 7 6 5 4 3 2 1 0 |
+| 0x0000 SPI_CTRL SPIE SPE 0 MSTR CPOL CPHA SPR1 SPR0 |
+| 0x0004 SPI_STAT SPIF WCOL ST1 ST0 WFFUL WFEMP RFFUL RFEMP |
+| 0x0008 SPI_DATA Bits 31:0, data to send out on MOSI |
+| 0x000C SPI_EXT ICNT1 ICNT0 BSWAP *HSMODE ESPR1 ESPR0 |
+| 0x0020 GPIO_OE 0=input, 1=output PWR_OE CS_OE |
+| 0x0024 GPIO_DATA CARD:1=missing, 0=present CARD PWR_DAT CS_DAT |
+| 0x0040 INT_EDGE 0=level, 1=edge DEV_E SPI_E |
+| 0x0044 INT_POL 1=active high, 0=active low DEV_P SPI_P |
+| 0x0048 INTMASK DEV SPI |
+| 0x004C INTSTATUS DEV SPI |
+| 0x0060 HEXDISP Reset value: 0x14e443f5. In hexdisp mode, value |
+| shows on the Raggedstone1 4-digit 7-segment display. |
+| 0x0064 CURRENT_MA Low 16 bits indicate card current consumption in mA |
+| 0x006C DISP_SEL Display mode (0=hexdisp, 1=current) DSP |
+| 0x00C0 PLL_CTL bit31=ext_clk, remainder unused. |
+| 0x00C4 PLL_STAT LOCK |
+| 0x00C8 CLK_FREQ |
+| 0x00CC CLK_CNT |
+| |
+| *Notes: HSMODE is not implemented, never set this bit! |
+| BSWAP is available in rev >= 8 |
+| |
++---------------------------------------------------------------------------+
+*/
+
+typedef volatile struct {
+ uint32 spih_ctrl; /* 0x00 SPI Control Register */
+ uint32 spih_stat; /* 0x04 SPI Status Register */
+ uint32 spih_data; /* 0x08 SPI Data Register, 32-bits wide */
+ uint32 spih_ext; /* 0x0C SPI Extension Register */
+ uint32 PAD[4]; /* 0x10-0x1F PADDING */
+
+ uint32 spih_gpio_ctrl; /* 0x20 SPI GPIO Control Register */
+ uint32 spih_gpio_data; /* 0x24 SPI GPIO Data Register */
+ uint32 PAD[6]; /* 0x28-0x3F PADDING */
+
+ uint32 spih_int_edge; /* 0x40 SPI Interrupt Edge Register (0=Level, 1=Edge) */
+ uint32 spih_int_pol; /* 0x44 SPI Interrupt Polarity Register (0=Active Low, */
+ /* 1=Active High) */
+ uint32 spih_int_mask; /* 0x48 SPI Interrupt Mask */
+ uint32 spih_int_status; /* 0x4C SPI Interrupt Status */
+ uint32 PAD[4]; /* 0x50-0x5F PADDING */
+
+ uint32 spih_hex_disp; /* 0x60 SPI 4-digit hex display value */
+ uint32 spih_current_ma; /* 0x64 SPI SD card current consumption in mA */
+ uint32 PAD[1]; /* 0x68 PADDING */
+ uint32 spih_disp_sel; /* 0x6c SPI 4-digit hex display mode select (1=current) */
+ uint32 PAD[4]; /* 0x70-0x7F PADDING */
+ uint32 PAD[8]; /* 0x80-0x9F PADDING */
+ uint32 PAD[8]; /* 0xA0-0xBF PADDING */
+ uint32 spih_pll_ctrl; /* 0xC0 PLL Control Register */
+ uint32 spih_pll_status; /* 0xC4 PLL Status Register */
+ uint32 spih_xtal_freq; /* 0xC8 External Clock Frequency in units of 10000Hz */
+ uint32 spih_clk_count; /* 0xCC External Clock Count Register */
+
+} spih_regs_t;
+
+typedef volatile struct {
+ uint32 cfg_space[0x40]; /* 0x000-0x0FF PCI Configuration Space (Read Only) */
+ uint32 P_IMG_CTRL0; /* 0x100 PCI Image0 Control Register */
+
+ uint32 P_BA0; /* 0x104 32 R/W PCI Image0 Base Address register */
+ uint32 P_AM0; /* 0x108 32 R/W PCI Image0 Address Mask register */
+ uint32 P_TA0; /* 0x10C 32 R/W PCI Image0 Translation Address register */
+ uint32 P_IMG_CTRL1; /* 0x110 32 R/W PCI Image1 Control register */
+ uint32 P_BA1; /* 0x114 32 R/W PCI Image1 Base Address register */
+ uint32 P_AM1; /* 0x118 32 R/W PCI Image1 Address Mask register */
+ uint32 P_TA1; /* 0x11C 32 R/W PCI Image1 Translation Address register */
+ uint32 P_IMG_CTRL2; /* 0x120 32 R/W PCI Image2 Control register */
+ uint32 P_BA2; /* 0x124 32 R/W PCI Image2 Base Address register */
+ uint32 P_AM2; /* 0x128 32 R/W PCI Image2 Address Mask register */
+ uint32 P_TA2; /* 0x12C 32 R/W PCI Image2 Translation Address register */
+ uint32 P_IMG_CTRL3; /* 0x130 32 R/W PCI Image3 Control register */
+ uint32 P_BA3; /* 0x134 32 R/W PCI Image3 Base Address register */
+ uint32 P_AM3; /* 0x138 32 R/W PCI Image3 Address Mask register */
+ uint32 P_TA3; /* 0x13C 32 R/W PCI Image3 Translation Address register */
+ uint32 P_IMG_CTRL4; /* 0x140 32 R/W PCI Image4 Control register */
+ uint32 P_BA4; /* 0x144 32 R/W PCI Image4 Base Address register */
+ uint32 P_AM4; /* 0x148 32 R/W PCI Image4 Address Mask register */
+ uint32 P_TA4; /* 0x14C 32 R/W PCI Image4 Translation Address register */
+ uint32 P_IMG_CTRL5; /* 0x150 32 R/W PCI Image5 Control register */
+ uint32 P_BA5; /* 0x154 32 R/W PCI Image5 Base Address register */
+ uint32 P_AM5; /* 0x158 32 R/W PCI Image5 Address Mask register */
+ uint32 P_TA5; /* 0x15C 32 R/W PCI Image5 Translation Address register */
+ uint32 P_ERR_CS; /* 0x160 32 R/W PCI Error Control and Status register */
+ uint32 P_ERR_ADDR; /* 0x164 32 R PCI Erroneous Address register */
+ uint32 P_ERR_DATA; /* 0x168 32 R PCI Erroneous Data register */
+
+ uint32 PAD[5]; /* 0x16C-0x17F PADDING */
+
+ uint32 WB_CONF_SPC_BAR; /* 0x180 32 R WISHBONE Configuration Space Base Address */
+ uint32 W_IMG_CTRL1; /* 0x184 32 R/W WISHBONE Image1 Control register */
+ uint32 W_BA1; /* 0x188 32 R/W WISHBONE Image1 Base Address register */
+ uint32 W_AM1; /* 0x18C 32 R/W WISHBONE Image1 Address Mask register */
+ uint32 W_TA1; /* 0x190 32 R/W WISHBONE Image1 Translation Address reg */
+ uint32 W_IMG_CTRL2; /* 0x194 32 R/W WISHBONE Image2 Control register */
+ uint32 W_BA2; /* 0x198 32 R/W WISHBONE Image2 Base Address register */
+ uint32 W_AM2; /* 0x19C 32 R/W WISHBONE Image2 Address Mask register */
+ uint32 W_TA2; /* 0x1A0 32 R/W WISHBONE Image2 Translation Address reg */
+ uint32 W_IMG_CTRL3; /* 0x1A4 32 R/W WISHBONE Image3 Control register */
+ uint32 W_BA3; /* 0x1A8 32 R/W WISHBONE Image3 Base Address register */
+ uint32 W_AM3; /* 0x1AC 32 R/W WISHBONE Image3 Address Mask register */
+ uint32 W_TA3; /* 0x1B0 32 R/W WISHBONE Image3 Translation Address reg */
+ uint32 W_IMG_CTRL4; /* 0x1B4 32 R/W WISHBONE Image4 Control register */
+ uint32 W_BA4; /* 0x1B8 32 R/W WISHBONE Image4 Base Address register */
+ uint32 W_AM4; /* 0x1BC 32 R/W WISHBONE Image4 Address Mask register */
+ uint32 W_TA4; /* 0x1C0 32 R/W WISHBONE Image4 Translation Address reg */
+ uint32 W_IMG_CTRL5; /* 0x1C4 32 R/W WISHBONE Image5 Control register */
+ uint32 W_BA5; /* 0x1C8 32 R/W WISHBONE Image5 Base Address register */
+ uint32 W_AM5; /* 0x1CC 32 R/W WISHBONE Image5 Address Mask register */
+ uint32 W_TA5; /* 0x1D0 32 R/W WISHBONE Image5 Translation Address reg */
+ uint32 W_ERR_CS; /* 0x1D4 32 R/W WISHBONE Error Control and Status reg */
+ uint32 W_ERR_ADDR; /* 0x1D8 32 R WISHBONE Erroneous Address register */
+ uint32 W_ERR_DATA; /* 0x1DC 32 R WISHBONE Erroneous Data register */
+ uint32 CNF_ADDR; /* 0x1E0 32 R/W Configuration Cycle register */
+ uint32 CNF_DATA; /* 0x1E4 32 R/W Configuration Cycle Generation Data reg */
+
+ uint32 INT_ACK; /* 0x1E8 32 R Interrupt Acknowledge register */
+ uint32 ICR; /* 0x1EC 32 R/W Interrupt Control register */
+ uint32 ISR; /* 0x1F0 32 R/W Interrupt Status register */
+} spih_pciregs_t;
+
+/*
+ * PCI Core interrupt enable and status bit definitions.
+ */
+
+/* PCI Core ICR Register bit definitions */
+#define PCI_INT_PROP_EN (1 << 0) /* Interrupt Propagation Enable */
+#define PCI_WB_ERR_INT_EN (1 << 1) /* Wishbone Error Interrupt Enable */
+#define PCI_PCI_ERR_INT_EN (1 << 2) /* PCI Error Interrupt Enable */
+#define PCI_PAR_ERR_INT_EN (1 << 3) /* Parity Error Interrupt Enable */
+#define PCI_SYS_ERR_INT_EN (1 << 4) /* System Error Interrupt Enable */
+#define PCI_SOFTWARE_RESET (1U << 31) /* Software reset of the PCI Core. */
+
+
+/* PCI Core ISR Register bit definitions */
+#define PCI_INT_PROP_ST (1 << 0) /* Interrupt Propagation Status */
+#define PCI_WB_ERR_INT_ST (1 << 1) /* Wishbone Error Interrupt Status */
+#define PCI_PCI_ERR_INT_ST (1 << 2) /* PCI Error Interrupt Status */
+#define PCI_PAR_ERR_INT_ST (1 << 3) /* Parity Error Interrupt Status */
+#define PCI_SYS_ERR_INT_ST (1 << 4) /* System Error Interrupt Status */
+
+
+/* Registers on the Wishbone bus */
+#define SPIH_CTLR_INTR (1 << 0) /* SPI Host Controller Core Interrupt */
+#define SPIH_DEV_INTR (1 << 1) /* SPI Device Interrupt */
+#define SPIH_WFIFO_INTR (1 << 2) /* SPI Tx FIFO Empty Intr (FPGA Rev >= 8) */
+
+/* GPIO Bit definitions */
+#define SPIH_CS (1 << 0) /* SPI Chip Select (active low) */
+#define SPIH_SLOT_POWER (1 << 1) /* SD Card Slot Power Enable */
+#define SPIH_CARD_DETECT (1 << 2) /* SD Card Detect */
+
+/* SPI Status Register Bit definitions */
+#define SPIH_STATE_MASK 0x30 /* SPI Transfer State Machine state mask */
+#define SPIH_STATE_SHIFT 4 /* SPI Transfer State Machine state shift */
+#define SPIH_WFFULL (1 << 3) /* SPI Write FIFO Full */
+#define SPIH_WFEMPTY (1 << 2) /* SPI Write FIFO Empty */
+#define SPIH_RFFULL (1 << 1) /* SPI Read FIFO Full */
+#define SPIH_RFEMPTY (1 << 0) /* SPI Read FIFO Empty */
+
+#define SPIH_EXT_CLK (1U << 31) /* Use External Clock as PLL Clock source. */
+
+#define SPIH_PLL_NO_CLK (1 << 1) /* Set to 1 if the PLL's input clock is lost. */
+#define SPIH_PLL_LOCKED (1 << 3) /* Set to 1 when the PLL is locked. */
+
+/* Spin bit loop bound check */
+#define SPI_SPIN_BOUND 0xf4240 /* 1 million */
diff --git a/drivers/net/wireless/bcm4329/include/bcmperf.h b/drivers/net/wireless/bcm4329/include/bcmperf.h
new file mode 100644
index 0000000..2a78784
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmperf.h
@@ -0,0 +1,36 @@
+/*
+ * Performance counters software interface.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmperf.h,v 13.5 2007/09/14 22:00:59 Exp $
+ */
+/* essai */
+#ifndef _BCMPERF_H_
+#define _BCMPERF_H_
+/* get cache hits and misses */
+#define BCMPERF_ENABLE_INSTRCOUNT()
+#define BCMPERF_ENABLE_ICACHE_MISS()
+#define BCMPERF_ENABLE_ICACHE_HIT()
+#define BCMPERF_GETICACHE_MISS(x) ((x) = 0)
+#define BCMPERF_GETICACHE_HIT(x) ((x) = 0)
+#define BCMPERF_GETINSTRCOUNT(x) ((x) = 0)
+#endif /* _BCMPERF_H_ */
diff --git a/drivers/net/wireless/bcm4329/include/bcmsdbus.h b/drivers/net/wireless/bcm4329/include/bcmsdbus.h
new file mode 100644
index 0000000..b7b67bc
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmsdbus.h
@@ -0,0 +1,117 @@
+/*
+ * Definitions for API from sdio common code (bcmsdh) to individual
+ * host controller drivers.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdbus.h,v 13.11.14.2.6.6 2009/10/27 17:20:28 Exp $
+ */
+
+#ifndef _sdio_api_h_
+#define _sdio_api_h_
+
+
+#define SDIOH_API_RC_SUCCESS (0x00)
+#define SDIOH_API_RC_FAIL (0x01)
+#define SDIOH_API_SUCCESS(status) (status == 0)
+
+#define SDIOH_READ 0 /* Read request */
+#define SDIOH_WRITE 1 /* Write request */
+
+#define SDIOH_DATA_FIX 0 /* Fixed addressing */
+#define SDIOH_DATA_INC 1 /* Incremental addressing */
+
+#define SDIOH_CMD_TYPE_NORMAL 0 /* Normal command */
+#define SDIOH_CMD_TYPE_APPEND 1 /* Append command */
+#define SDIOH_CMD_TYPE_CUTTHRU 2 /* Cut-through command */
+
+#define SDIOH_DATA_PIO 0 /* PIO mode */
+#define SDIOH_DATA_DMA 1 /* DMA mode */
+
+
+typedef int SDIOH_API_RC;
+
+/* SDio Host structure */
+typedef struct sdioh_info sdioh_info_t;
+
+/* callback function, taking one arg */
+typedef void (*sdioh_cb_fn_t)(void *);
+
+/* attach, return handler on success, NULL if failed.
+ * The handler shall be provided by all subsequent calls. No local cache
+ * cfghdl points to the starting address of pci device mapped memory
+ */
+extern sdioh_info_t * sdioh_attach(osl_t *osh, void *cfghdl, uint irq);
+extern SDIOH_API_RC sdioh_detach(osl_t *osh, sdioh_info_t *si);
+extern SDIOH_API_RC sdioh_interrupt_register(sdioh_info_t *si, sdioh_cb_fn_t fn, void *argh);
+extern SDIOH_API_RC sdioh_interrupt_deregister(sdioh_info_t *si);
+
+/* query whether SD interrupt is enabled or not */
+extern SDIOH_API_RC sdioh_interrupt_query(sdioh_info_t *si, bool *onoff);
+
+/* enable or disable SD interrupt */
+extern SDIOH_API_RC sdioh_interrupt_set(sdioh_info_t *si, bool enable_disable);
+
+#if defined(DHD_DEBUG)
+extern bool sdioh_interrupt_pending(sdioh_info_t *si);
+#endif
+
+/* read or write one byte using cmd52 */
+extern SDIOH_API_RC sdioh_request_byte(sdioh_info_t *si, uint rw, uint fnc, uint addr, uint8 *byte);
+
+/* read or write 2/4 bytes using cmd53 */
+extern SDIOH_API_RC sdioh_request_word(sdioh_info_t *si, uint cmd_type, uint rw, uint fnc,
+ uint addr, uint32 *word, uint nbyte);
+
+/* read or write any buffer using cmd53 */
+extern SDIOH_API_RC sdioh_request_buffer(sdioh_info_t *si, uint pio_dma, uint fix_inc,
+ uint rw, uint fnc_num, uint32 addr, uint regwidth, uint32 buflen, uint8 *buffer,
+ void *pkt);
+
+/* get cis data */
+extern SDIOH_API_RC sdioh_cis_read(sdioh_info_t *si, uint fuc, uint8 *cis, uint32 length);
+
+extern SDIOH_API_RC sdioh_cfg_read(sdioh_info_t *si, uint fuc, uint32 addr, uint8 *data);
+extern SDIOH_API_RC sdioh_cfg_write(sdioh_info_t *si, uint fuc, uint32 addr, uint8 *data);
+
+/* query number of io functions */
+extern uint sdioh_query_iofnum(sdioh_info_t *si);
+
+/* handle iovars */
+extern int sdioh_iovar_op(sdioh_info_t *si, const char *name,
+ void *params, int plen, void *arg, int len, bool set);
+
+/* Issue abort to the specified function and clear controller as needed */
+extern int sdioh_abort(sdioh_info_t *si, uint fnc);
+
+/* Start and Stop SDIO without re-enumerating the SD card. */
+extern int sdioh_start(sdioh_info_t *si, int stage);
+extern int sdioh_stop(sdioh_info_t *si);
+
+/* Reset and re-initialize the device */
+extern int sdioh_sdio_reset(sdioh_info_t *si);
+
+/* Helper function */
+void *bcmsdh_get_sdioh(bcmsdh_info_t *sdh);
+
+
+
+#endif /* _sdio_api_h_ */
diff --git a/drivers/net/wireless/bcm4329/include/bcmsdh.h b/drivers/net/wireless/bcm4329/include/bcmsdh.h
new file mode 100644
index 0000000..f5dee5c
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmsdh.h
@@ -0,0 +1,208 @@
+/*
+ * SDIO host client driver interface of Broadcom HNBU
+ * export functions to client drivers
+ * abstract OS and BUS specific details of SDIO
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdh.h,v 13.35.14.7.6.8 2009/10/14 04:22:25 Exp $
+ */
+
+#ifndef _bcmsdh_h_
+#define _bcmsdh_h_
+
+#define BCMSDH_ERROR_VAL 0x0001 /* Error */
+#define BCMSDH_INFO_VAL 0x0002 /* Info */
+extern const uint bcmsdh_msglevel;
+
+#define BCMSDH_ERROR(x)
+#define BCMSDH_INFO(x)
+
+/* forward declarations */
+typedef struct bcmsdh_info bcmsdh_info_t;
+typedef void (*bcmsdh_cb_fn_t)(void *);
+
+/* Attach and build an interface to the underlying SD host driver.
+ * - Allocates resources (structs, arrays, mem, OS handles, etc) needed by bcmsdh.
+ * - Returns the bcmsdh handle and virtual address base for register access.
+ * The returned handle should be used in all subsequent calls, but the bcmsh
+ * implementation may maintain a single "default" handle (e.g. the first or
+ * most recent one) to enable single-instance implementations to pass NULL.
+ */
+extern bcmsdh_info_t *bcmsdh_attach(osl_t *osh, void *cfghdl, void **regsva, uint irq);
+
+/* Detach - freeup resources allocated in attach */
+extern int bcmsdh_detach(osl_t *osh, void *sdh);
+
+/* Query if SD device interrupts are enabled */
+extern bool bcmsdh_intr_query(void *sdh);
+
+/* Enable/disable SD interrupt */
+extern int bcmsdh_intr_enable(void *sdh);
+extern int bcmsdh_intr_disable(void *sdh);
+
+/* Register/deregister device interrupt handler. */
+extern int bcmsdh_intr_reg(void *sdh, bcmsdh_cb_fn_t fn, void *argh);
+extern int bcmsdh_intr_dereg(void *sdh);
+
+#if defined(DHD_DEBUG)
+/* Query pending interrupt status from the host controller */
+extern bool bcmsdh_intr_pending(void *sdh);
+#endif
+
+#ifdef BCMLXSDMMC
+extern int bcmsdh_claim_host_and_lock(void *sdh);
+extern int bcmsdh_release_host_and_unlock(void *sdh);
+#endif /* BCMLXSDMMC */
+
+/* Register a callback to be called if and when bcmsdh detects
+ * device removal. No-op in the case of non-removable/hardwired devices.
+ */
+extern int bcmsdh_devremove_reg(void *sdh, bcmsdh_cb_fn_t fn, void *argh);
+
+/* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface).
+ * fn: function number
+ * addr: unmodified SDIO-space address
+ * data: data byte to write
+ * err: pointer to error code (or NULL)
+ */
+extern uint8 bcmsdh_cfg_read(void *sdh, uint func, uint32 addr, int *err);
+extern void bcmsdh_cfg_write(void *sdh, uint func, uint32 addr, uint8 data, int *err);
+
+/* Read/Write 4bytes from/to cfg space */
+extern uint32 bcmsdh_cfg_read_word(void *sdh, uint fnc_num, uint32 addr, int *err);
+extern void bcmsdh_cfg_write_word(void *sdh, uint fnc_num, uint32 addr, uint32 data, int *err);
+
+/* Read CIS content for specified function.
+ * fn: function whose CIS is being requested (0 is common CIS)
+ * cis: pointer to memory location to place results
+ * length: number of bytes to read
+ * Internally, this routine uses the values from the cis base regs (0x9-0xB)
+ * to form an SDIO-space address to read the data from.
+ */
+extern int bcmsdh_cis_read(void *sdh, uint func, uint8 *cis, uint length);
+
+/* Synchronous access to device (client) core registers via CMD53 to F1.
+ * addr: backplane address (i.e. >= regsva from attach)
+ * size: register width in bytes (2 or 4)
+ * data: data for register write
+ */
+extern uint32 bcmsdh_reg_read(void *sdh, uint32 addr, uint size);
+extern uint32 bcmsdh_reg_write(void *sdh, uint32 addr, uint size, uint32 data);
+
+/* Indicate if last reg read/write failed */
+extern bool bcmsdh_regfail(void *sdh);
+
+/* Buffer transfer to/from device (client) core via cmd53.
+ * fn: function number
+ * addr: backplane address (i.e. >= regsva from attach)
+ * flags: backplane width, address increment, sync/async
+ * buf: pointer to memory data buffer
+ * nbytes: number of bytes to transfer to/from buf
+ * pkt: pointer to packet associated with buf (if any)
+ * complete: callback function for command completion (async only)
+ * handle: handle for completion callback (first arg in callback)
+ * Returns 0 or error code.
+ * NOTE: Async operation is not currently supported.
+ */
+typedef void (*bcmsdh_cmplt_fn_t)(void *handle, int status, bool sync_waiting);
+extern int bcmsdh_send_buf(void *sdh, uint32 addr, uint fn, uint flags,
+ uint8 *buf, uint nbytes, void *pkt,
+ bcmsdh_cmplt_fn_t complete, void *handle);
+extern int bcmsdh_recv_buf(void *sdh, uint32 addr, uint fn, uint flags,
+ uint8 *buf, uint nbytes, void *pkt,
+ bcmsdh_cmplt_fn_t complete, void *handle);
+
+/* Flags bits */
+#define SDIO_REQ_4BYTE 0x1 /* Four-byte target (backplane) width (vs. two-byte) */
+#define SDIO_REQ_FIXED 0x2 /* Fixed address (FIFO) (vs. incrementing address) */
+#define SDIO_REQ_ASYNC 0x4 /* Async request (vs. sync request) */
+
+/* Pending (non-error) return code */
+#define BCME_PENDING 1
+
+/* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
+ * rw: read or write (0/1)
+ * addr: direct SDIO address
+ * buf: pointer to memory data buffer
+ * nbytes: number of bytes to transfer to/from buf
+ * Returns 0 or error code.
+ */
+extern int bcmsdh_rwdata(void *sdh, uint rw, uint32 addr, uint8 *buf, uint nbytes);
+
+/* Issue an abort to the specified function */
+extern int bcmsdh_abort(void *sdh, uint fn);
+
+/* Start SDIO Host Controller communication */
+extern int bcmsdh_start(void *sdh, int stage);
+
+/* Stop SDIO Host Controller communication */
+extern int bcmsdh_stop(void *sdh);
+
+/* Returns the "Device ID" of target device on the SDIO bus. */
+extern int bcmsdh_query_device(void *sdh);
+
+/* Returns the number of IO functions reported by the device */
+extern uint bcmsdh_query_iofnum(void *sdh);
+
+/* Miscellaneous knob tweaker. */
+extern int bcmsdh_iovar_op(void *sdh, const char *name,
+ void *params, int plen, void *arg, int len, bool set);
+
+/* Reset and reinitialize the device */
+extern int bcmsdh_reset(bcmsdh_info_t *sdh);
+
+/* helper functions */
+
+extern void *bcmsdh_get_sdioh(bcmsdh_info_t *sdh);
+
+/* callback functions */
+typedef struct {
+ /* attach to device */
+ void *(*attach)(uint16 vend_id, uint16 dev_id, uint16 bus, uint16 slot,
+ uint16 func, uint bustype, void * regsva, osl_t * osh,
+ void * param);
+ /* detach from device */
+ void (*detach)(void *ch);
+} bcmsdh_driver_t;
+
+/* platform specific/high level functions */
+extern int bcmsdh_register(bcmsdh_driver_t *driver);
+extern void bcmsdh_unregister(void);
+extern bool bcmsdh_chipmatch(uint16 vendor, uint16 device);
+extern void bcmsdh_device_remove(void * sdh);
+
+#if defined(OOB_INTR_ONLY)
+extern int bcmsdh_register_oob_intr(void * dhdp);
+extern void bcmsdh_unregister_oob_intr(void);
+extern void bcmsdh_oob_intr_set(bool enable);
+#endif /* defined(OOB_INTR_ONLY) */
+/* Function to pass device-status bits to DHD. */
+extern uint32 bcmsdh_get_dstatus(void *sdh);
+
+/* Function to return current window addr */
+extern uint32 bcmsdh_cur_sbwad(void *sdh);
+
+/* Function to pass chipid and rev to lower layers for controlling pr's */
+extern void bcmsdh_chipinfo(void *sdh, uint32 chip, uint32 chiprev);
+
+
+#endif /* _bcmsdh_h_ */
diff --git a/drivers/net/wireless/bcm4329/include/bcmsdh_sdmmc.h b/drivers/net/wireless/bcm4329/include/bcmsdh_sdmmc.h
new file mode 100644
index 0000000..4e6d1b5
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmsdh_sdmmc.h
@@ -0,0 +1,122 @@
+/*
+ * BCMSDH Function Driver for the native SDIO/MMC driver in the Linux Kernel
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdh_sdmmc.h,v 13.1.2.1.8.7 2009/10/27 18:22:52 Exp $
+ */
+
+#ifndef __BCMSDH_SDMMC_H__
+#define __BCMSDH_SDMMC_H__
+
+#define sd_err(x)
+#define sd_trace(x)
+#define sd_info(x)
+#define sd_debug(x)
+#define sd_data(x)
+#define sd_ctrl(x)
+
+#define sd_sync_dma(sd, read, nbytes)
+#define sd_init_dma(sd)
+#define sd_ack_intr(sd)
+#define sd_wakeup(sd);
+
+/* Allocate/init/free per-OS private data */
+extern int sdioh_sdmmc_osinit(sdioh_info_t *sd);
+extern void sdioh_sdmmc_osfree(sdioh_info_t *sd);
+
+#define sd_log(x)
+
+#define SDIOH_ASSERT(exp) \
+ do { if (!(exp)) \
+ printf("!!!ASSERT fail: file %s lines %d", __FILE__, __LINE__); \
+ } while (0)
+
+#define BLOCK_SIZE_4318 64
+#define BLOCK_SIZE_4328 512
+
+/* internal return code */
+#define SUCCESS 0
+#define ERROR 1
+
+/* private bus modes */
+#define SDIOH_MODE_SD4 2
+#define CLIENT_INTR 0x100 /* Get rid of this! */
+
+struct sdioh_info {
+ osl_t *osh; /* osh handler */
+ bool client_intr_enabled; /* interrupt connnected flag */
+ bool intr_handler_valid; /* client driver interrupt handler valid */
+ sdioh_cb_fn_t intr_handler; /* registered interrupt handler */
+ void *intr_handler_arg; /* argument to call interrupt handler */
+ uint16 intmask; /* Current active interrupts */
+ void *sdos_info; /* Pointer to per-OS private data */
+
+ uint irq; /* Client irq */
+ int intrcount; /* Client interrupts */
+
+ bool sd_use_dma; /* DMA on CMD53 */
+ bool sd_blockmode; /* sd_blockmode == FALSE => 64 Byte Cmd 53s. */
+ /* Must be on for sd_multiblock to be effective */
+ bool use_client_ints; /* If this is false, make sure to restore */
+ int sd_mode; /* SD1/SD4/SPI */
+ int client_block_size[SDIOD_MAX_IOFUNCS]; /* Blocksize */
+ uint8 num_funcs; /* Supported funcs on client */
+ uint32 com_cis_ptr;
+ uint32 func_cis_ptr[SDIOD_MAX_IOFUNCS];
+ uint max_dma_len;
+ uint max_dma_descriptors; /* DMA Descriptors supported by this controller. */
+// SDDMA_DESCRIPTOR SGList[32]; /* Scatter/Gather DMA List */
+};
+
+/************************************************************
+ * Internal interfaces: per-port references into bcmsdh_sdmmc.c
+ */
+
+/* Global message bits */
+extern uint sd_msglevel;
+
+/* OS-independent interrupt handler */
+extern bool check_client_intr(sdioh_info_t *sd);
+
+/* Core interrupt enable/disable of device interrupts */
+extern void sdioh_sdmmc_devintr_on(sdioh_info_t *sd);
+extern void sdioh_sdmmc_devintr_off(sdioh_info_t *sd);
+
+
+/**************************************************************
+ * Internal interfaces: bcmsdh_sdmmc.c references to per-port code
+ */
+
+/* Register mapping routines */
+extern uint32 *sdioh_sdmmc_reg_map(osl_t *osh, int32 addr, int size);
+extern void sdioh_sdmmc_reg_unmap(osl_t *osh, int32 addr, int size);
+
+/* Interrupt (de)registration routines */
+extern int sdioh_sdmmc_register_irq(sdioh_info_t *sd, uint irq);
+extern void sdioh_sdmmc_free_irq(uint irq, sdioh_info_t *sd);
+
+typedef struct _BCMSDH_SDMMC_INSTANCE {
+ sdioh_info_t *sd;
+ struct sdio_func *func[SDIOD_MAX_IOFUNCS];
+} BCMSDH_SDMMC_INSTANCE, *PBCMSDH_SDMMC_INSTANCE;
+
+#endif /* __BCMSDH_SDMMC_H__ */
diff --git a/drivers/net/wireless/bcm4329/include/bcmsdpcm.h b/drivers/net/wireless/bcm4329/include/bcmsdpcm.h
new file mode 100644
index 0000000..77aca45
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmsdpcm.h
@@ -0,0 +1,263 @@
+/*
+ * Broadcom SDIO/PCMCIA
+ * Software-specific definitions shared between device and host side
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdpcm.h,v 1.1.2.4 2010/07/02 01:15:46 Exp $
+ */
+
+#ifndef _bcmsdpcm_h_
+#define _bcmsdpcm_h_
+
+/*
+ * Software allocation of To SB Mailbox resources
+ */
+
+/* intstatus bits */
+#define I_SMB_NAK I_SMB_SW0 /* To SB Mailbox Frame NAK */
+#define I_SMB_INT_ACK I_SMB_SW1 /* To SB Mailbox Host Interrupt ACK */
+#define I_SMB_USE_OOB I_SMB_SW2 /* To SB Mailbox Use OOB Wakeup */
+#define I_SMB_DEV_INT I_SMB_SW3 /* To SB Mailbox Miscellaneous Interrupt */
+
+/* tosbmailbox bits corresponding to intstatus bits */
+#define SMB_NAK (1 << 0) /* To SB Mailbox Frame NAK */
+#define SMB_INT_ACK (1 << 1) /* To SB Mailbox Host Interrupt ACK */
+#define SMB_USE_OOB (1 << 2) /* To SB Mailbox Use OOB Wakeup */
+#define SMB_DEV_INT (1 << 3) /* To SB Mailbox Miscellaneous Interrupt */
+#define SMB_MASK 0x0000000f /* To SB Mailbox Mask */
+
+/* tosbmailboxdata */
+#define SMB_DATA_VERSION_MASK 0x00ff0000 /* host protocol version (sent with F2 enable) */
+#define SMB_DATA_VERSION_SHIFT 16 /* host protocol version (sent with F2 enable) */
+
+/*
+ * Software allocation of To Host Mailbox resources
+ */
+
+/* intstatus bits */
+#define I_HMB_FC_STATE I_HMB_SW0 /* To Host Mailbox Flow Control State */
+#define I_HMB_FC_CHANGE I_HMB_SW1 /* To Host Mailbox Flow Control State Changed */
+#define I_HMB_FRAME_IND I_HMB_SW2 /* To Host Mailbox Frame Indication */
+#define I_HMB_HOST_INT I_HMB_SW3 /* To Host Mailbox Miscellaneous Interrupt */
+
+/* tohostmailbox bits corresponding to intstatus bits */
+#define HMB_FC_ON (1 << 0) /* To Host Mailbox Flow Control State */
+#define HMB_FC_CHANGE (1 << 1) /* To Host Mailbox Flow Control State Changed */
+#define HMB_FRAME_IND (1 << 2) /* To Host Mailbox Frame Indication */
+#define HMB_HOST_INT (1 << 3) /* To Host Mailbox Miscellaneous Interrupt */
+#define HMB_MASK 0x0000000f /* To Host Mailbox Mask */
+
+/* tohostmailboxdata */
+#define HMB_DATA_NAKHANDLED 1 /* we're ready to retransmit NAK'd frame to host */
+#define HMB_DATA_DEVREADY 2 /* we're ready to to talk to host after enable */
+#define HMB_DATA_FC 4 /* per prio flowcontrol update flag to host */
+#define HMB_DATA_FWREADY 8 /* firmware is ready for protocol activity */
+
+#define HMB_DATA_FCDATA_MASK 0xff000000 /* per prio flowcontrol data */
+#define HMB_DATA_FCDATA_SHIFT 24 /* per prio flowcontrol data */
+
+#define HMB_DATA_VERSION_MASK 0x00ff0000 /* device protocol version (with devready) */
+#define HMB_DATA_VERSION_SHIFT 16 /* device protocol version (with devready) */
+
+/*
+ * Software-defined protocol header
+ */
+
+/* Current protocol version */
+#define SDPCM_PROT_VERSION 4
+
+/* SW frame header */
+#define SDPCM_SEQUENCE_MASK 0x000000ff /* Sequence Number Mask */
+#define SDPCM_PACKET_SEQUENCE(p) (((uint8 *)p)[0] & 0xff) /* p starts w/SW Header */
+
+#define SDPCM_CHANNEL_MASK 0x00000f00 /* Channel Number Mask */
+#define SDPCM_CHANNEL_SHIFT 8 /* Channel Number Shift */
+#define SDPCM_PACKET_CHANNEL(p) (((uint8 *)p)[1] & 0x0f) /* p starts w/SW Header */
+
+#define SDPCM_FLAGS_MASK 0x0000f000 /* Mask of flag bits */
+#define SDPCM_FLAGS_SHIFT 12 /* Flag bits shift */
+#define SDPCM_PACKET_FLAGS(p) ((((uint8 *)p)[1] & 0xf0) >> 4) /* p starts w/SW Header */
+
+/* Next Read Len: lookahead length of next frame, in 16-byte units (rounded up) */
+#define SDPCM_NEXTLEN_MASK 0x00ff0000 /* Next Read Len Mask */
+#define SDPCM_NEXTLEN_SHIFT 16 /* Next Read Len Shift */
+#define SDPCM_NEXTLEN_VALUE(p) ((((uint8 *)p)[2] & 0xff) << 4) /* p starts w/SW Header */
+#define SDPCM_NEXTLEN_OFFSET 2
+
+/* Data Offset from SOF (HW Tag, SW Tag, Pad) */
+#define SDPCM_DOFFSET_OFFSET 3 /* Data Offset */
+#define SDPCM_DOFFSET_VALUE(p) (((uint8 *)p)[SDPCM_DOFFSET_OFFSET] & 0xff)
+#define SDPCM_DOFFSET_MASK 0xff000000
+#define SDPCM_DOFFSET_SHIFT 24
+
+#define SDPCM_FCMASK_OFFSET 4 /* Flow control */
+#define SDPCM_FCMASK_VALUE(p) (((uint8 *)p)[SDPCM_FCMASK_OFFSET ] & 0xff)
+#define SDPCM_WINDOW_OFFSET 5 /* Credit based fc */
+#define SDPCM_WINDOW_VALUE(p) (((uint8 *)p)[SDPCM_WINDOW_OFFSET] & 0xff)
+#define SDPCM_VERSION_OFFSET 6 /* Version # */
+#define SDPCM_VERSION_VALUE(p) (((uint8 *)p)[SDPCM_VERSION_OFFSET] & 0xff)
+#define SDPCM_UNUSED_OFFSET 7 /* Spare */
+#define SDPCM_UNUSED_VALUE(p) (((uint8 *)p)[SDPCM_UNUSED_OFFSET] & 0xff)
+
+#define SDPCM_SWHEADER_LEN 8 /* SW header is 64 bits */
+
+/* logical channel numbers */
+#define SDPCM_CONTROL_CHANNEL 0 /* Control Request/Response Channel Id */
+#define SDPCM_EVENT_CHANNEL 1 /* Asyc Event Indication Channel Id */
+#define SDPCM_DATA_CHANNEL 2 /* Data Xmit/Recv Channel Id */
+#define SDPCM_GLOM_CHANNEL 3 /* For coalesced packets (superframes) */
+#define SDPCM_TEST_CHANNEL 15 /* Reserved for test/debug packets */
+#define SDPCM_MAX_CHANNEL 15
+
+#define SDPCM_SEQUENCE_WRAP 256 /* wrap-around val for eight-bit frame seq number */
+
+#define SDPCM_FLAG_RESVD0 0x01
+#define SDPCM_FLAG_RESVD1 0x02
+#define SDPCM_FLAG_GSPI_TXENAB 0x04
+#define SDPCM_FLAG_GLOMDESC 0x08 /* Superframe descriptor mask */
+
+/* For GLOM_CHANNEL frames, use a flag to indicate descriptor frame */
+#define SDPCM_GLOMDESC_FLAG (SDPCM_FLAG_GLOMDESC << SDPCM_FLAGS_SHIFT)
+
+#define SDPCM_GLOMDESC(p) (((uint8 *)p)[1] & 0x80)
+
+/* For TEST_CHANNEL packets, define another 4-byte header */
+#define SDPCM_TEST_HDRLEN 4 /* Generally: Cmd(1), Ext(1), Len(2);
+ * Semantics of Ext byte depend on command.
+ * Len is current or requested frame length, not
+ * including test header; sent little-endian.
+ */
+#define SDPCM_TEST_DISCARD 0x01 /* Receiver discards. Ext is a pattern id. */
+#define SDPCM_TEST_ECHOREQ 0x02 /* Echo request. Ext is a pattern id. */
+#define SDPCM_TEST_ECHORSP 0x03 /* Echo response. Ext is a pattern id. */
+#define SDPCM_TEST_BURST 0x04 /* Receiver to send a burst. Ext is a frame count */
+#define SDPCM_TEST_SEND 0x05 /* Receiver sets send mode. Ext is boolean on/off */
+
+/* Handy macro for filling in datagen packets with a pattern */
+#define SDPCM_TEST_FILL(byteno, id) ((uint8)(id + byteno))
+
+/*
+ * Software counters (first part matches hardware counters)
+ */
+
+typedef volatile struct {
+ uint32 cmd52rd; /* Cmd52RdCount, SDIO: cmd52 reads */
+ uint32 cmd52wr; /* Cmd52WrCount, SDIO: cmd52 writes */
+ uint32 cmd53rd; /* Cmd53RdCount, SDIO: cmd53 reads */
+ uint32 cmd53wr; /* Cmd53WrCount, SDIO: cmd53 writes */
+ uint32 abort; /* AbortCount, SDIO: aborts */
+ uint32 datacrcerror; /* DataCrcErrorCount, SDIO: frames w/CRC error */
+ uint32 rdoutofsync; /* RdOutOfSyncCount, SDIO/PCMCIA: Rd Frm out of sync */
+ uint32 wroutofsync; /* RdOutOfSyncCount, SDIO/PCMCIA: Wr Frm out of sync */
+ uint32 writebusy; /* WriteBusyCount, SDIO: device asserted "busy" */
+ uint32 readwait; /* ReadWaitCount, SDIO: no data ready for a read cmd */
+ uint32 readterm; /* ReadTermCount, SDIO: read frame termination cmds */
+ uint32 writeterm; /* WriteTermCount, SDIO: write frames termination cmds */
+ uint32 rxdescuflo; /* receive descriptor underflows */
+ uint32 rxfifooflo; /* receive fifo overflows */
+ uint32 txfifouflo; /* transmit fifo underflows */
+ uint32 runt; /* runt (too short) frames recv'd from bus */
+ uint32 badlen; /* frame's rxh len does not match its hw tag len */
+ uint32 badcksum; /* frame's hw tag chksum doesn't agree with len value */
+ uint32 seqbreak; /* break in sequence # space from one rx frame to the next */
+ uint32 rxfcrc; /* frame rx header indicates crc error */
+ uint32 rxfwoos; /* frame rx header indicates write out of sync */
+ uint32 rxfwft; /* frame rx header indicates write frame termination */
+ uint32 rxfabort; /* frame rx header indicates frame aborted */
+ uint32 woosint; /* write out of sync interrupt */
+ uint32 roosint; /* read out of sync interrupt */
+ uint32 rftermint; /* read frame terminate interrupt */
+ uint32 wftermint; /* write frame terminate interrupt */
+} sdpcmd_cnt_t;
+
+/*
+ * Register Access Macros
+ */
+
+#define SDIODREV_IS(var, val) ((var) == (val))
+#define SDIODREV_GE(var, val) ((var) >= (val))
+#define SDIODREV_GT(var, val) ((var) > (val))
+#define SDIODREV_LT(var, val) ((var) < (val))
+#define SDIODREV_LE(var, val) ((var) <= (val))
+
+#define SDIODDMAREG32(h, dir, chnl) \
+ ((dir) == DMA_TX ? \
+ (void *)(uintptr)&((h)->regs->dma.sdiod32.dma32regs[chnl].xmt) : \
+ (void *)(uintptr)&((h)->regs->dma.sdiod32.dma32regs[chnl].rcv))
+
+#define SDIODDMAREG64(h, dir, chnl) \
+ ((dir) == DMA_TX ? \
+ (void *)(uintptr)&((h)->regs->dma.sdiod64.dma64regs[chnl].xmt) : \
+ (void *)(uintptr)&((h)->regs->dma.sdiod64.dma64regs[chnl].rcv))
+
+#define SDIODDMAREG(h, dir, chnl) \
+ (SDIODREV_LT((h)->corerev, 1) ? \
+ SDIODDMAREG32((h), (dir), (chnl)) : \
+ SDIODDMAREG64((h), (dir), (chnl)))
+
+#define PCMDDMAREG(h, dir, chnl) \
+ ((dir) == DMA_TX ? \
+ (void *)(uintptr)&((h)->regs->dma.pcm32.dmaregs.xmt) : \
+ (void *)(uintptr)&((h)->regs->dma.pcm32.dmaregs.rcv))
+
+#define SDPCMDMAREG(h, dir, chnl, coreid) \
+ ((coreid) == SDIOD_CORE_ID ? \
+ SDIODDMAREG(h, dir, chnl) : \
+ PCMDDMAREG(h, dir, chnl))
+
+#define SDIODFIFOREG(h, corerev) \
+ (SDIODREV_LT((corerev), 1) ? \
+ ((dma32diag_t *)(uintptr)&((h)->regs->dma.sdiod32.dmafifo)) : \
+ ((dma32diag_t *)(uintptr)&((h)->regs->dma.sdiod64.dmafifo)))
+
+#define PCMDFIFOREG(h) \
+ ((dma32diag_t *)(uintptr)&((h)->regs->dma.pcm32.dmafifo))
+
+#define SDPCMFIFOREG(h, coreid, corerev) \
+ ((coreid) == SDIOD_CORE_ID ? \
+ SDIODFIFOREG(h, corerev) : \
+ PCMDFIFOREG(h))
+
+/*
+ * Shared structure between dongle and the host
+ * The structure contains pointers to trap or assert information shared with the host
+ */
+#define SDPCM_SHARED_VERSION 0x0002
+#define SDPCM_SHARED_VERSION_MASK 0x00FF
+#define SDPCM_SHARED_ASSERT_BUILT 0x0100
+#define SDPCM_SHARED_ASSERT 0x0200
+#define SDPCM_SHARED_TRAP 0x0400
+
+typedef struct {
+ uint32 flags;
+ uint32 trap_addr;
+ uint32 assert_exp_addr;
+ uint32 assert_file_addr;
+ uint32 assert_line;
+ uint32 console_addr; /* Address of hndrte_cons_t */
+ uint32 msgtrace_addr;
+ uint8 tag[32];
+} sdpcm_shared_t;
+
+extern sdpcm_shared_t sdpcm_shared;
+
+#endif /* _bcmsdpcm_h_ */
diff --git a/drivers/net/wireless/bcm4329/include/bcmsdspi.h b/drivers/net/wireless/bcm4329/include/bcmsdspi.h
new file mode 100644
index 0000000..eaae10d
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmsdspi.h
@@ -0,0 +1,131 @@
+/*
+ * SD-SPI Protocol Conversion - BCMSDH->SPI Translation Layer
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdspi.h,v 13.8.10.2 2008/06/30 21:09:40 Exp $
+ */
+
+/* global msglevel for debug messages - bitvals come from sdiovar.h */
+
+#define sd_err(x)
+#define sd_trace(x)
+#define sd_info(x)
+#define sd_debug(x)
+#define sd_data(x)
+#define sd_ctrl(x)
+
+#define sd_log(x)
+
+#define SDIOH_ASSERT(exp) \
+ do { if (!(exp)) \
+ printf("!!!ASSERT fail: file %s lines %d", __FILE__, __LINE__); \
+ } while (0)
+
+#define BLOCK_SIZE_4318 64
+#define BLOCK_SIZE_4328 512
+
+/* internal return code */
+#define SUCCESS 0
+#undef ERROR
+#define ERROR 1
+
+/* private bus modes */
+#define SDIOH_MODE_SPI 0
+
+#define USE_BLOCKMODE 0x2 /* Block mode can be single block or multi */
+#define USE_MULTIBLOCK 0x4
+
+struct sdioh_info {
+ uint cfg_bar; /* pci cfg address for bar */
+ uint32 caps; /* cached value of capabilities reg */
+ uint bar0; /* BAR0 for PCI Device */
+ osl_t *osh; /* osh handler */
+ void *controller; /* Pointer to SPI Controller's private data struct */
+
+ uint lockcount; /* nest count of sdspi_lock() calls */
+ bool client_intr_enabled; /* interrupt connnected flag */
+ bool intr_handler_valid; /* client driver interrupt handler valid */
+ sdioh_cb_fn_t intr_handler; /* registered interrupt handler */
+ void *intr_handler_arg; /* argument to call interrupt handler */
+ bool initialized; /* card initialized */
+ uint32 target_dev; /* Target device ID */
+ uint32 intmask; /* Current active interrupts */
+ void *sdos_info; /* Pointer to per-OS private data */
+
+ uint32 controller_type; /* Host controller type */
+ uint8 version; /* Host Controller Spec Compliance Version */
+ uint irq; /* Client irq */
+ uint32 intrcount; /* Client interrupts */
+ uint32 local_intrcount; /* Controller interrupts */
+ bool host_init_done; /* Controller initted */
+ bool card_init_done; /* Client SDIO interface initted */
+ bool polled_mode; /* polling for command completion */
+
+ bool sd_use_dma; /* DMA on CMD53 */
+ bool sd_blockmode; /* sd_blockmode == FALSE => 64 Byte Cmd 53s. */
+ /* Must be on for sd_multiblock to be effective */
+ bool use_client_ints; /* If this is false, make sure to restore */
+ bool got_hcint; /* Host Controller interrupt. */
+ /* polling hack in wl_linux.c:wl_timer() */
+ int adapter_slot; /* Maybe dealing with multiple slots/controllers */
+ int sd_mode; /* SD1/SD4/SPI */
+ int client_block_size[SDIOD_MAX_IOFUNCS]; /* Blocksize */
+ uint32 data_xfer_count; /* Current register transfer size */
+ uint32 cmd53_wr_data; /* Used to pass CMD53 write data */
+ uint32 card_response; /* Used to pass back response status byte */
+ uint32 card_rsp_data; /* Used to pass back response data word */
+ uint16 card_rca; /* Current Address */
+ uint8 num_funcs; /* Supported funcs on client */
+ uint32 com_cis_ptr;
+ uint32 func_cis_ptr[SDIOD_MAX_IOFUNCS];
+ void *dma_buf;
+ ulong dma_phys;
+ int r_cnt; /* rx count */
+ int t_cnt; /* tx_count */
+};
+
+/************************************************************
+ * Internal interfaces: per-port references into bcmsdspi.c
+ */
+
+/* Global message bits */
+extern uint sd_msglevel;
+
+/**************************************************************
+ * Internal interfaces: bcmsdspi.c references to per-port code
+ */
+
+/* Register mapping routines */
+extern uint32 *spi_reg_map(osl_t *osh, uintptr addr, int size);
+extern void spi_reg_unmap(osl_t *osh, uintptr addr, int size);
+
+/* Interrupt (de)registration routines */
+extern int spi_register_irq(sdioh_info_t *sd, uint irq);
+extern void spi_free_irq(uint irq, sdioh_info_t *sd);
+
+/* OS-specific interrupt wrappers (atomic interrupt enable/disable) */
+extern void spi_lock(sdioh_info_t *sd);
+extern void spi_unlock(sdioh_info_t *sd);
+
+/* Allocate/init/free per-OS private data */
+extern int spi_osinit(sdioh_info_t *sd);
+extern void spi_osfree(sdioh_info_t *sd);
diff --git a/drivers/net/wireless/bcm4329/include/bcmsdstd.h b/drivers/net/wireless/bcm4329/include/bcmsdstd.h
new file mode 100644
index 0000000..974b3d4
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmsdstd.h
@@ -0,0 +1,223 @@
+/*
+ * 'Standard' SDIO HOST CONTROLLER driver
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmsdstd.h,v 13.16.18.1.16.3 2009/12/10 01:09:23 Exp $
+ */
+
+/* global msglevel for debug messages - bitvals come from sdiovar.h */
+
+#define sd_err(x) do { if (sd_msglevel & SDH_ERROR_VAL) printf x; } while (0)
+#define sd_trace(x)
+#define sd_info(x)
+#define sd_debug(x)
+#define sd_data(x)
+#define sd_ctrl(x)
+#define sd_dma(x)
+
+#define sd_sync_dma(sd, read, nbytes)
+#define sd_init_dma(sd)
+#define sd_ack_intr(sd)
+#define sd_wakeup(sd);
+/* Allocate/init/free per-OS private data */
+extern int sdstd_osinit(sdioh_info_t *sd);
+extern void sdstd_osfree(sdioh_info_t *sd);
+
+#define sd_log(x)
+
+#define SDIOH_ASSERT(exp) \
+ do { if (!(exp)) \
+ printf("!!!ASSERT fail: file %s lines %d", __FILE__, __LINE__); \
+ } while (0)
+
+#define BLOCK_SIZE_4318 64
+#define BLOCK_SIZE_4328 512
+
+/* internal return code */
+#define SUCCESS 0
+#define ERROR 1
+
+/* private bus modes */
+#define SDIOH_MODE_SPI 0
+#define SDIOH_MODE_SD1 1
+#define SDIOH_MODE_SD4 2
+
+#define MAX_SLOTS 6 /* For PCI: Only 6 BAR entries => 6 slots */
+#define SDIOH_REG_WINSZ 0x100 /* Number of registers in Standard Host Controller */
+
+#define SDIOH_TYPE_ARASAN_HDK 1
+#define SDIOH_TYPE_BCM27XX 2
+#define SDIOH_TYPE_TI_PCIXX21 4 /* TI PCIxx21 Standard Host Controller */
+#define SDIOH_TYPE_RICOH_R5C822 5 /* Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter */
+#define SDIOH_TYPE_JMICRON 6 /* JMicron Standard SDIO Host Controller */
+
+/* For linux, allow yielding for dongle */
+#define BCMSDYIELD
+
+/* Expected card status value for CMD7 */
+#define SDIOH_CMD7_EXP_STATUS 0x00001E00
+
+#define RETRIES_LARGE 100000
+#define RETRIES_SMALL 100
+
+
+#define USE_BLOCKMODE 0x2 /* Block mode can be single block or multi */
+#define USE_MULTIBLOCK 0x4
+
+#define USE_FIFO 0x8 /* Fifo vs non-fifo */
+
+#define CLIENT_INTR 0x100 /* Get rid of this! */
+
+
+struct sdioh_info {
+ uint cfg_bar; /* pci cfg address for bar */
+ uint32 caps; /* cached value of capabilities reg */
+ uint32 curr_caps; /* max current capabilities reg */
+
+ osl_t *osh; /* osh handler */
+ volatile char *mem_space; /* pci device memory va */
+ uint lockcount; /* nest count of sdstd_lock() calls */
+ bool client_intr_enabled; /* interrupt connnected flag */
+ bool intr_handler_valid; /* client driver interrupt handler valid */
+ sdioh_cb_fn_t intr_handler; /* registered interrupt handler */
+ void *intr_handler_arg; /* argument to call interrupt handler */
+ bool initialized; /* card initialized */
+ uint target_dev; /* Target device ID */
+ uint16 intmask; /* Current active interrupts */
+ void *sdos_info; /* Pointer to per-OS private data */
+
+ uint32 controller_type; /* Host controller type */
+ uint8 version; /* Host Controller Spec Compliance Version */
+ uint irq; /* Client irq */
+ int intrcount; /* Client interrupts */
+ int local_intrcount; /* Controller interrupts */
+ bool host_init_done; /* Controller initted */
+ bool card_init_done; /* Client SDIO interface initted */
+ bool polled_mode; /* polling for command completion */
+
+ bool sd_blockmode; /* sd_blockmode == FALSE => 64 Byte Cmd 53s. */
+ /* Must be on for sd_multiblock to be effective */
+ bool use_client_ints; /* If this is false, make sure to restore */
+ /* polling hack in wl_linux.c:wl_timer() */
+ int adapter_slot; /* Maybe dealing with multiple slots/controllers */
+ int sd_mode; /* SD1/SD4/SPI */
+ int client_block_size[SDIOD_MAX_IOFUNCS]; /* Blocksize */
+ uint32 data_xfer_count; /* Current transfer */
+ uint16 card_rca; /* Current Address */
+ int8 sd_dma_mode; /* DMA Mode (PIO, SDMA, ... ADMA2) on CMD53 */
+ uint8 num_funcs; /* Supported funcs on client */
+ uint32 com_cis_ptr;
+ uint32 func_cis_ptr[SDIOD_MAX_IOFUNCS];
+ void *dma_buf; /* DMA Buffer virtual address */
+ ulong dma_phys; /* DMA Buffer physical address */
+ void *adma2_dscr_buf; /* ADMA2 Descriptor Buffer virtual address */
+ ulong adma2_dscr_phys; /* ADMA2 Descriptor Buffer physical address */
+
+ /* adjustments needed to make the dma align properly */
+ void *dma_start_buf;
+ ulong dma_start_phys;
+ uint alloced_dma_size;
+ void *adma2_dscr_start_buf;
+ ulong adma2_dscr_start_phys;
+ uint alloced_adma2_dscr_size;
+
+ int r_cnt; /* rx count */
+ int t_cnt; /* tx_count */
+ bool got_hcint; /* local interrupt flag */
+ uint16 last_intrstatus; /* to cache intrstatus */
+};
+
+#define DMA_MODE_NONE 0
+#define DMA_MODE_SDMA 1
+#define DMA_MODE_ADMA1 2
+#define DMA_MODE_ADMA2 3
+#define DMA_MODE_ADMA2_64 4
+#define DMA_MODE_AUTO -1
+
+#define USE_DMA(sd) ((bool)((sd->sd_dma_mode > 0) ? TRUE : FALSE))
+
+/* SDIO Host Control Register DMA Mode Definitions */
+#define SDIOH_SDMA_MODE 0
+#define SDIOH_ADMA1_MODE 1
+#define SDIOH_ADMA2_MODE 2
+#define SDIOH_ADMA2_64_MODE 3
+
+#define ADMA2_ATTRIBUTE_VALID (1 << 0) /* ADMA Descriptor line valid */
+#define ADMA2_ATTRIBUTE_END (1 << 1) /* End of Descriptor */
+#define ADMA2_ATTRIBUTE_INT (1 << 2) /* Interrupt when line is done */
+#define ADMA2_ATTRIBUTE_ACT_NOP (0 << 4) /* Skip current line, go to next. */
+#define ADMA2_ATTRIBUTE_ACT_RSV (1 << 4) /* Same as NOP */
+#define ADMA1_ATTRIBUTE_ACT_SET (1 << 4) /* ADMA1 Only - set transfer length */
+#define ADMA2_ATTRIBUTE_ACT_TRAN (2 << 4) /* Transfer Data of one descriptor line. */
+#define ADMA2_ATTRIBUTE_ACT_LINK (3 << 4) /* Link Descriptor */
+
+/* ADMA2 Descriptor Table Entry for 32-bit Address */
+typedef struct adma2_dscr_32b {
+ uint32 len_attr;
+ uint32 phys_addr;
+} adma2_dscr_32b_t;
+
+/* ADMA1 Descriptor Table Entry */
+typedef struct adma1_dscr {
+ uint32 phys_addr_attr;
+} adma1_dscr_t;
+
+/************************************************************
+ * Internal interfaces: per-port references into bcmsdstd.c
+ */
+
+/* Global message bits */
+extern uint sd_msglevel;
+
+/* OS-independent interrupt handler */
+extern bool check_client_intr(sdioh_info_t *sd);
+
+/* Core interrupt enable/disable of device interrupts */
+extern void sdstd_devintr_on(sdioh_info_t *sd);
+extern void sdstd_devintr_off(sdioh_info_t *sd);
+
+/* Enable/disable interrupts for local controller events */
+extern void sdstd_intrs_on(sdioh_info_t *sd, uint16 norm, uint16 err);
+extern void sdstd_intrs_off(sdioh_info_t *sd, uint16 norm, uint16 err);
+
+/* Wait for specified interrupt and error bits to be set */
+extern void sdstd_spinbits(sdioh_info_t *sd, uint16 norm, uint16 err);
+
+
+/**************************************************************
+ * Internal interfaces: bcmsdstd.c references to per-port code
+ */
+
+/* Register mapping routines */
+extern uint32 *sdstd_reg_map(osl_t *osh, int32 addr, int size);
+extern void sdstd_reg_unmap(osl_t *osh, int32 addr, int size);
+
+/* Interrupt (de)registration routines */
+extern int sdstd_register_irq(sdioh_info_t *sd, uint irq);
+extern void sdstd_free_irq(uint irq, sdioh_info_t *sd);
+
+/* OS-specific interrupt wrappers (atomic interrupt enable/disable) */
+extern void sdstd_lock(sdioh_info_t *sd);
+extern void sdstd_unlock(sdioh_info_t *sd);
+
+/* OS-specific wait-for-interrupt-or-status */
+extern uint16 sdstd_waitbits(sdioh_info_t *sd, uint16 norm, uint16 err, bool yield);
diff --git a/drivers/net/wireless/bcm4329/include/bcmspi.h b/drivers/net/wireless/bcm4329/include/bcmspi.h
new file mode 100644
index 0000000..2e2bc93
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmspi.h
@@ -0,0 +1,36 @@
+/*
+ * Broadcom SPI Low-Level Hardware Driver API
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmspi.h,v 13.3.10.2 2008/06/30 21:09:40 Exp $
+ */
+
+extern void spi_devintr_off(sdioh_info_t *sd);
+extern void spi_devintr_on(sdioh_info_t *sd);
+extern bool spi_start_clock(sdioh_info_t *sd, uint16 new_sd_divisor);
+extern bool spi_controller_highspeed_mode(sdioh_info_t *sd, bool hsmode);
+extern bool spi_check_client_intr(sdioh_info_t *sd, int *is_dev_intr);
+extern bool spi_hw_attach(sdioh_info_t *sd);
+extern bool spi_hw_detach(sdioh_info_t *sd);
+extern void spi_sendrecv(sdioh_info_t *sd, uint8 *msg_out, uint8 *msg_in, int msglen);
+extern void spi_spinbits(sdioh_info_t *sd);
+extern void spi_waitbits(sdioh_info_t *sd, bool yield);
diff --git a/drivers/net/wireless/bcm4329/include/bcmspibrcm.h b/drivers/net/wireless/bcm4329/include/bcmspibrcm.h
new file mode 100644
index 0000000..9dce878
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmspibrcm.h
@@ -0,0 +1,134 @@
+/*
+ * SD-SPI Protocol Conversion - BCMSDH->gSPI Translation Layer
+ *
+ * Copyright (C) 2010, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior
+ * written permission of Broadcom Corporation.
+ *
+ * $Id: bcmspibrcm.h,v 1.4.4.1.4.3.6.1 2008/09/27 17:03:25 Exp $
+ */
+
+/* global msglevel for debug messages - bitvals come from sdiovar.h */
+
+#define sd_err(x)
+#define sd_trace(x)
+#define sd_info(x)
+#define sd_debug(x)
+#define sd_data(x)
+#define sd_ctrl(x)
+
+#define sd_log(x)
+
+#define SDIOH_ASSERT(exp) \
+ do { if (!(exp)) \
+ printf("!!!ASSERT fail: file %s lines %d", __FILE__, __LINE__); \
+ } while (0)
+
+#define BLOCK_SIZE_F1 64
+#define BLOCK_SIZE_F2 2048
+#define BLOCK_SIZE_F3 2048
+
+/* internal return code */
+#define SUCCESS 0
+#undef ERROR
+#define ERROR 1
+#define ERROR_UF 2
+#define ERROR_OF 3
+
+/* private bus modes */
+#define SDIOH_MODE_SPI 0
+
+#define USE_BLOCKMODE 0x2 /* Block mode can be single block or multi */
+#define USE_MULTIBLOCK 0x4
+
+struct sdioh_info {
+ uint cfg_bar; /* pci cfg address for bar */
+ uint32 caps; /* cached value of capabilities reg */
+ void *bar0; /* BAR0 for PCI Device */
+ osl_t *osh; /* osh handler */
+ void *controller; /* Pointer to SPI Controller's private data struct */
+
+ uint lockcount; /* nest count of spi_lock() calls */
+ bool client_intr_enabled; /* interrupt connnected flag */
+ bool intr_handler_valid; /* client driver interrupt handler valid */
+ sdioh_cb_fn_t intr_handler; /* registered interrupt handler */
+ void *intr_handler_arg; /* argument to call interrupt handler */
+ bool initialized; /* card initialized */
+ uint32 target_dev; /* Target device ID */
+ uint32 intmask; /* Current active interrupts */
+ void *sdos_info; /* Pointer to per-OS private data */
+
+ uint32 controller_type; /* Host controller type */
+ uint8 version; /* Host Controller Spec Compliance Version */
+ uint irq; /* Client irq */
+ uint32 intrcount; /* Client interrupts */
+ uint32 local_intrcount; /* Controller interrupts */
+ bool host_init_done; /* Controller initted */
+ bool card_init_done; /* Client SDIO interface initted */
+ bool polled_mode; /* polling for command completion */
+
+ bool sd_use_dma; /* DMA on CMD53 */
+ bool sd_blockmode; /* sd_blockmode == FALSE => 64 Byte Cmd 53s. */
+ /* Must be on for sd_multiblock to be effective */
+ bool use_client_ints; /* If this is false, make sure to restore */
+ /* polling hack in wl_linux.c:wl_timer() */
+ int adapter_slot; /* Maybe dealing with multiple slots/controllers */
+ int sd_mode; /* SD1/SD4/SPI */
+ int client_block_size[SPI_MAX_IOFUNCS]; /* Blocksize */
+ uint32 data_xfer_count; /* Current transfer */
+ uint16 card_rca; /* Current Address */
+ uint8 num_funcs; /* Supported funcs on client */
+ uint32 card_dstatus; /* 32bit device status */
+ uint32 com_cis_ptr;
+ uint32 func_cis_ptr[SPI_MAX_IOFUNCS];
+ void *dma_buf;
+ ulong dma_phys;
+ int r_cnt; /* rx count */
+ int t_cnt; /* tx_count */
+ uint32 wordlen; /* host processor 16/32bits */
+ uint32 prev_fun;
+ uint32 chip;
+ uint32 chiprev;
+ bool resp_delay_all;
+ bool dwordmode;
+
+ struct spierrstats_t spierrstats;
+};
+
+/************************************************************
+ * Internal interfaces: per-port references into bcmspibrcm.c
+ */
+
+/* Global message bits */
+extern uint sd_msglevel;
+
+/**************************************************************
+ * Internal interfaces: bcmspibrcm.c references to per-port code
+ */
+
+/* Interrupt (de)registration routines */
+extern int spi_register_irq(sdioh_info_t *sd, uint irq);
+extern void spi_free_irq(uint irq, sdioh_info_t *sd);
+
+/* OS-specific interrupt wrappers (atomic interrupt enable/disable) */
+extern void spi_lock(sdioh_info_t *sd);
+extern void spi_unlock(sdioh_info_t *sd);
+
+/* Allocate/init/free per-OS private data */
+extern int spi_osinit(sdioh_info_t *sd);
+extern void spi_osfree(sdioh_info_t *sd);
+
+#define SPI_RW_FLAG_M BITFIELD_MASK(1) /* Bit [31] - R/W Command Bit */
+#define SPI_RW_FLAG_S 31
+#define SPI_ACCESS_M BITFIELD_MASK(1) /* Bit [30] - Fixed/Incr Access */
+#define SPI_ACCESS_S 30
+#define SPI_FUNCTION_M BITFIELD_MASK(2) /* Bit [29:28] - Function Number */
+#define SPI_FUNCTION_S 28
+#define SPI_REG_ADDR_M BITFIELD_MASK(17) /* Bit [27:11] - Address */
+#define SPI_REG_ADDR_S 11
+#define SPI_LEN_M BITFIELD_MASK(11) /* Bit [10:0] - Packet length */
+#define SPI_LEN_S 0
diff --git a/drivers/net/wireless/bcm4329/include/bcmutils.h b/drivers/net/wireless/bcm4329/include/bcmutils.h
new file mode 100644
index 0000000..f85ed35
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmutils.h
@@ -0,0 +1,637 @@
+/*
+ * Misc useful os-independent macros and functions.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: bcmutils.h,v 13.184.4.6.2.1.18.25 2010/04/26 06:05:24 Exp $
+ */
+
+
+#ifndef _bcmutils_h_
+#define _bcmutils_h_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#define _BCM_U 0x01
+#define _BCM_L 0x02
+#define _BCM_D 0x04
+#define _BCM_C 0x08
+#define _BCM_P 0x10
+#define _BCM_S 0x20
+#define _BCM_X 0x40
+#define _BCM_SP 0x80
+
+extern const unsigned char bcm_ctype[];
+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
+
+#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
+#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
+#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0)
+#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0)
+#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
+#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0)
+#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
+#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0)
+#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0)
+#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0)
+#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
+#define bcm_tolower(c) (bcm_isupper((c)) ? ((c) + 'a' - 'A') : (c))
+#define bcm_toupper(c) (bcm_islower((c)) ? ((c) + 'A' - 'a') : (c))
+
+
+
+struct bcmstrbuf {
+ char *buf;
+ unsigned int size;
+ char *origbuf;
+ unsigned int origsize;
+};
+
+
+#ifdef BCMDRIVER
+#include <osl.h>
+
+#define GPIO_PIN_NOTDEFINED 0x20
+
+
+#define SPINWAIT(exp, us) { \
+ uint countdown = (us) + 9; \
+ while ((exp) && (countdown >= 10)) {\
+ OSL_DELAY(10); \
+ countdown -= 10; \
+ } \
+}
+
+
+
+#ifndef PKTQ_LEN_DEFAULT
+#define PKTQ_LEN_DEFAULT 128
+#endif
+#ifndef PKTQ_MAX_PREC
+#define PKTQ_MAX_PREC 16
+#endif
+
+typedef struct pktq_prec {
+ void *head;
+ void *tail;
+ uint16 len;
+ uint16 max;
+} pktq_prec_t;
+
+
+
+struct pktq {
+ uint16 num_prec;
+ uint16 hi_prec;
+ uint16 max;
+ uint16 len;
+
+ struct pktq_prec q[PKTQ_MAX_PREC];
+};
+
+
+struct spktq {
+ uint16 num_prec;
+ uint16 hi_prec;
+ uint16 max;
+ uint16 len;
+
+ struct pktq_prec q[1];
+};
+
+#define PKTQ_PREC_ITER(pq, prec) for (prec = (pq)->num_prec - 1; prec >= 0; prec--)
+
+
+
+
+struct ether_addr;
+
+extern int ether_isbcast(const void *ea);
+extern int ether_isnulladdr(const void *ea);
+
+
+
+#define pktq_psetmax(pq, prec, _max) ((pq)->q[prec].max = (_max))
+#define pktq_plen(pq, prec) ((pq)->q[prec].len)
+#define pktq_pavail(pq, prec) ((pq)->q[prec].max - (pq)->q[prec].len)
+#define pktq_pfull(pq, prec) ((pq)->q[prec].len >= (pq)->q[prec].max)
+#define pktq_pempty(pq, prec) ((pq)->q[prec].len == 0)
+
+#define pktq_ppeek(pq, prec) ((pq)->q[prec].head)
+#define pktq_ppeek_tail(pq, prec) ((pq)->q[prec].tail)
+
+extern void *pktq_penq(struct pktq *pq, int prec, void *p);
+extern void *pktq_penq_head(struct pktq *pq, int prec, void *p);
+extern void *pktq_pdeq(struct pktq *pq, int prec);
+extern void *pktq_pdeq_tail(struct pktq *pq, int prec);
+
+extern bool pktq_pdel(struct pktq *pq, void *p, int prec);
+
+
+extern void pktq_pflush(osl_t *osh, struct pktq *pq, int prec, bool dir);
+
+extern void pktq_flush(osl_t *osh, struct pktq *pq, bool dir);
+
+
+
+extern int pktq_mlen(struct pktq *pq, uint prec_bmp);
+extern void *pktq_mdeq(struct pktq *pq, uint prec_bmp, int *prec_out);
+
+
+
+#define pktq_len(pq) ((int)(pq)->len)
+#define pktq_max(pq) ((int)(pq)->max)
+#define pktq_avail(pq) ((int)((pq)->max - (pq)->len))
+#define pktq_full(pq) ((pq)->len >= (pq)->max)
+#define pktq_empty(pq) ((pq)->len == 0)
+
+
+#define pktenq(pq, p) pktq_penq(((struct pktq *)pq), 0, (p))
+#define pktenq_head(pq, p) pktq_penq_head(((struct pktq *)pq), 0, (p))
+#define pktdeq(pq) pktq_pdeq(((struct pktq *)pq), 0)
+#define pktdeq_tail(pq) pktq_pdeq_tail(((struct pktq *)pq), 0)
+#define pktqinit(pq, len) pktq_init(((struct pktq *)pq), 1, len)
+
+extern void pktq_init(struct pktq *pq, int num_prec, int max_len);
+
+extern void *pktq_deq(struct pktq *pq, int *prec_out);
+extern void *pktq_deq_tail(struct pktq *pq, int *prec_out);
+extern void *pktq_peek(struct pktq *pq, int *prec_out);
+extern void *pktq_peek_tail(struct pktq *pq, int *prec_out);
+
+
+
+extern uint pktcopy(osl_t *osh, void *p, uint offset, int len, uchar *buf);
+extern uint pktfrombuf(osl_t *osh, void *p, uint offset, int len, uchar *buf);
+extern uint pkttotlen(osl_t *osh, void *p);
+extern void *pktlast(osl_t *osh, void *p);
+extern uint pktsegcnt(osl_t *osh, void *p);
+
+
+extern uint pktsetprio(void *pkt, bool update_vtag);
+#define PKTPRIO_VDSCP 0x100
+#define PKTPRIO_VLAN 0x200
+#define PKTPRIO_UPD 0x400
+#define PKTPRIO_DSCP 0x800
+
+
+extern int bcm_atoi(char *s);
+extern ulong bcm_strtoul(char *cp, char **endp, uint base);
+extern char *bcmstrstr(char *haystack, char *needle);
+extern char *bcmstrcat(char *dest, const char *src);
+extern char *bcmstrncat(char *dest, const char *src, uint size);
+extern ulong wchar2ascii(char *abuf, ushort *wbuf, ushort wbuflen, ulong abuflen);
+char* bcmstrtok(char **string, const char *delimiters, char *tokdelim);
+int bcmstricmp(const char *s1, const char *s2);
+int bcmstrnicmp(const char* s1, const char* s2, int cnt);
+
+
+
+extern char *bcm_ether_ntoa(const struct ether_addr *ea, char *buf);
+extern int bcm_ether_atoe(char *p, struct ether_addr *ea);
+
+
+struct ipv4_addr;
+extern char *bcm_ip_ntoa(struct ipv4_addr *ia, char *buf);
+
+
+extern void bcm_mdelay(uint ms);
+
+extern char *getvar(char *vars, const char *name);
+extern int getintvar(char *vars, const char *name);
+extern uint getgpiopin(char *vars, char *pin_name, uint def_pin);
+#define bcm_perf_enable()
+#define bcmstats(fmt)
+#define bcmlog(fmt, a1, a2)
+#define bcmdumplog(buf, size) *buf = '\0'
+#define bcmdumplogent(buf, idx) -1
+
+#define bcmtslog(tstamp, fmt, a1, a2)
+#define bcmprinttslogs()
+#define bcmprinttstamp(us)
+
+
+
+
+typedef struct bcm_iovar {
+ const char *name;
+ uint16 varid;
+ uint16 flags;
+ uint16 type;
+ uint16 minlen;
+} bcm_iovar_t;
+
+
+
+
+#define IOV_GET 0
+#define IOV_SET 1
+
+
+#define IOV_GVAL(id) ((id)*2)
+#define IOV_SVAL(id) (((id)*2)+IOV_SET)
+#define IOV_ISSET(actionid) ((actionid & IOV_SET) == IOV_SET)
+
+
+
+extern const bcm_iovar_t *bcm_iovar_lookup(const bcm_iovar_t *table, const char *name);
+extern int bcm_iovar_lencheck(const bcm_iovar_t *table, void *arg, int len, bool set);
+
+#endif
+
+
+#define IOVT_VOID 0
+#define IOVT_BOOL 1
+#define IOVT_INT8 2
+#define IOVT_UINT8 3
+#define IOVT_INT16 4
+#define IOVT_UINT16 5
+#define IOVT_INT32 6
+#define IOVT_UINT32 7
+#define IOVT_BUFFER 8
+#define BCM_IOVT_VALID(type) (((unsigned int)(type)) <= IOVT_BUFFER)
+
+
+#define BCM_IOV_TYPE_INIT { \
+ "void", \
+ "bool", \
+ "int8", \
+ "uint8", \
+ "int16", \
+ "uint16", \
+ "int32", \
+ "uint32", \
+ "buffer", \
+ "" }
+
+#define BCM_IOVT_IS_INT(type) (\
+ (type == IOVT_BOOL) || \
+ (type == IOVT_INT8) || \
+ (type == IOVT_UINT8) || \
+ (type == IOVT_INT16) || \
+ (type == IOVT_UINT16) || \
+ (type == IOVT_INT32) || \
+ (type == IOVT_UINT32))
+
+
+
+#define BCME_STRLEN 64
+#define VALID_BCMERROR(e) ((e <= 0) && (e >= BCME_LAST))
+
+
+
+
+#define BCME_OK 0
+#define BCME_ERROR -1
+#define BCME_BADARG -2
+#define BCME_BADOPTION -3
+#define BCME_NOTUP -4
+#define BCME_NOTDOWN -5
+#define BCME_NOTAP -6
+#define BCME_NOTSTA -7
+#define BCME_BADKEYIDX -8
+#define BCME_RADIOOFF -9
+#define BCME_NOTBANDLOCKED -10
+#define BCME_NOCLK -11
+#define BCME_BADRATESET -12
+#define BCME_BADBAND -13
+#define BCME_BUFTOOSHORT -14
+#define BCME_BUFTOOLONG -15
+#define BCME_BUSY -16
+#define BCME_NOTASSOCIATED -17
+#define BCME_BADSSIDLEN -18
+#define BCME_OUTOFRANGECHAN -19
+#define BCME_BADCHAN -20
+#define BCME_BADADDR -21
+#define BCME_NORESOURCE -22
+#define BCME_UNSUPPORTED -23
+#define BCME_BADLEN -24
+#define BCME_NOTREADY -25
+#define BCME_EPERM -26
+#define BCME_NOMEM -27
+#define BCME_ASSOCIATED -28
+#define BCME_RANGE -29
+#define BCME_NOTFOUND -30
+#define BCME_WME_NOT_ENABLED -31
+#define BCME_TSPEC_NOTFOUND -32
+#define BCME_ACM_NOTSUPPORTED -33
+#define BCME_NOT_WME_ASSOCIATION -34
+#define BCME_SDIO_ERROR -35
+#define BCME_DONGLE_DOWN -36
+#define BCME_VERSION -37
+#define BCME_TXFAIL -38
+#define BCME_RXFAIL -39
+#define BCME_NODEVICE -40
+#define BCME_UNFINISHED -41
+#define BCME_LAST BCME_UNFINISHED
+
+
+#define BCMERRSTRINGTABLE { \
+ "OK", \
+ "Undefined error", \
+ "Bad Argument", \
+ "Bad Option", \
+ "Not up", \
+ "Not down", \
+ "Not AP", \
+ "Not STA", \
+ "Bad Key Index", \
+ "Radio Off", \
+ "Not band locked", \
+ "No clock", \
+ "Bad Rate valueset", \
+ "Bad Band", \
+ "Buffer too short", \
+ "Buffer too long", \
+ "Busy", \
+ "Not Associated", \
+ "Bad SSID len", \
+ "Out of Range Channel", \
+ "Bad Channel", \
+ "Bad Address", \
+ "Not Enough Resources", \
+ "Unsupported", \
+ "Bad length", \
+ "Not Ready", \
+ "Not Permitted", \
+ "No Memory", \
+ "Associated", \
+ "Not In Range", \
+ "Not Found", \
+ "WME Not Enabled", \
+ "TSPEC Not Found", \
+ "ACM Not Supported", \
+ "Not WME Association", \
+ "SDIO Bus Error", \
+ "Dongle Not Accessible", \
+ "Incorrect version", \
+ "TX Failure", \
+ "RX Failure", \
+ "Device Not Present", \
+ "Command not finished", \
+}
+
+#ifndef ABS
+#define ABS(a) (((a) < 0)?-(a):(a))
+#endif
+
+#ifndef MIN
+#define MIN(a, b) (((a) < (b))?(a):(b))
+#endif
+
+#ifndef MAX
+#define MAX(a, b) (((a) > (b))?(a):(b))
+#endif
+
+#define CEIL(x, y) (((x) + ((y)-1)) / (y))
+#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y))
+#define ISALIGNED(a, x) (((a) & ((x)-1)) == 0)
+#define ALIGN_ADDR(addr, boundary) (void *)(((uintptr)(addr) + (boundary) - 1) \
+ & ~((boundary) - 1))
+#define ISPOWEROF2(x) ((((x)-1)&(x)) == 0)
+#define VALID_MASK(mask) !((mask) & ((mask) + 1))
+#ifndef OFFSETOF
+#define OFFSETOF(type, member) ((uint)(uintptr)&((type *)0)->member)
+#endif
+#ifndef ARRAYSIZE
+#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0]))
+#endif
+
+
+#ifndef setbit
+#ifndef NBBY
+#define NBBY 8
+#endif
+#define setbit(a, i) (((uint8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
+#define clrbit(a, i) (((uint8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
+#define isset(a, i) (((const uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
+#define isclr(a, i) ((((const uint8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
+#endif
+
+#define NBITS(type) (sizeof(type) * 8)
+#define NBITVAL(nbits) (1 << (nbits))
+#define MAXBITVAL(nbits) ((1 << (nbits)) - 1)
+#define NBITMASK(nbits) MAXBITVAL(nbits)
+#define MAXNBVAL(nbyte) MAXBITVAL((nbyte) * 8)
+
+
+#define MUX(pred, true, false) ((pred) ? (true) : (false))
+
+
+#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
+#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)
+
+
+#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
+#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))
+
+
+#define MODADD(x, y, bound) \
+ MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
+#define MODSUB(x, y, bound) \
+ MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))
+
+
+#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
+#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))
+
+
+#define CRC8_INIT_VALUE 0xff
+#define CRC8_GOOD_VALUE 0x9f
+#define CRC16_INIT_VALUE 0xffff
+#define CRC16_GOOD_VALUE 0xf0b8
+#define CRC32_INIT_VALUE 0xffffffff
+#define CRC32_GOOD_VALUE 0xdebb20e3
+
+
+typedef struct bcm_bit_desc {
+ uint32 bit;
+ const char* name;
+} bcm_bit_desc_t;
+
+
+typedef struct bcm_tlv {
+ uint8 id;
+ uint8 len;
+ uint8 data[1];
+} bcm_tlv_t;
+
+
+#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (int)(buflen) >= (int)(2 + (elt)->len))
+
+
+#define ETHER_ADDR_STR_LEN 18
+
+
+#ifdef IL_BIGENDIAN
+static INLINE uint32
+load32_ua(uint8 *a)
+{
+ return ((a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]);
+}
+
+static INLINE void
+store32_ua(uint8 *a, uint32 v)
+{
+ a[0] = (v >> 24) & 0xff;
+ a[1] = (v >> 16) & 0xff;
+ a[2] = (v >> 8) & 0xff;
+ a[3] = v & 0xff;
+}
+
+static INLINE uint16
+load16_ua(uint8 *a)
+{
+ return ((a[0] << 8) | a[1]);
+}
+
+static INLINE void
+store16_ua(uint8 *a, uint16 v)
+{
+ a[0] = (v >> 8) & 0xff;
+ a[1] = v & 0xff;
+}
+
+#else
+
+static INLINE uint32
+load32_ua(uint8 *a)
+{
+ return ((a[3] << 24) | (a[2] << 16) | (a[1] << 8) | a[0]);
+}
+
+static INLINE void
+store32_ua(uint8 *a, uint32 v)
+{
+ a[3] = (v >> 24) & 0xff;
+ a[2] = (v >> 16) & 0xff;
+ a[1] = (v >> 8) & 0xff;
+ a[0] = v & 0xff;
+}
+
+static INLINE uint16
+load16_ua(uint8 *a)
+{
+ return ((a[1] << 8) | a[0]);
+}
+
+static INLINE void
+store16_ua(uint8 *a, uint16 v)
+{
+ a[1] = (v >> 8) & 0xff;
+ a[0] = v & 0xff;
+}
+
+#endif
+
+
+
+static INLINE void
+xor_128bit_block(const uint8 *src1, const uint8 *src2, uint8 *dst)
+{
+ if (
+#ifdef __i386__
+ 1 ||
+#endif
+ (((uintptr)src1 | (uintptr)src2 | (uintptr)dst) & 3) == 0) {
+
+
+ ((uint32 *)dst)[0] = ((uint32 *)src1)[0] ^ ((uint32 *)src2)[0];
+ ((uint32 *)dst)[1] = ((uint32 *)src1)[1] ^ ((uint32 *)src2)[1];
+ ((uint32 *)dst)[2] = ((uint32 *)src1)[2] ^ ((uint32 *)src2)[2];
+ ((uint32 *)dst)[3] = ((uint32 *)src1)[3] ^ ((uint32 *)src2)[3];
+ } else {
+
+ int k;
+ for (k = 0; k < 16; k++)
+ dst[k] = src1[k] ^ src2[k];
+ }
+}
+
+
+
+extern uint8 hndcrc8(uint8 *p, uint nbytes, uint8 crc);
+extern uint16 hndcrc16(uint8 *p, uint nbytes, uint16 crc);
+extern uint32 hndcrc32(uint8 *p, uint nbytes, uint32 crc);
+
+#if defined(DHD_DEBUG) || defined(WLMSG_PRHDRS) || defined(WLMSG_PRPKT) || \
+ defined(WLMSG_ASSOC)
+extern int bcm_format_flags(const bcm_bit_desc_t *bd, uint32 flags, char* buf, int len);
+extern int bcm_format_hex(char *str, const void *bytes, int len);
+extern void prhex(const char *msg, uchar *buf, uint len);
+#endif
+extern char *bcm_brev_str(uint32 brev, char *buf);
+extern void printbig(char *buf);
+
+
+extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen);
+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
+
+
+extern const char *bcmerrorstr(int bcmerror);
+
+
+typedef uint32 mbool;
+#define mboolset(mb, bit) ((mb) |= (bit))
+#define mboolclr(mb, bit) ((mb) &= ~(bit))
+#define mboolisset(mb, bit) (((mb) & (bit)) != 0)
+#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val)))
+
+
+extern uint16 bcm_qdbm_to_mw(uint8 qdbm);
+extern uint8 bcm_mw_to_qdbm(uint16 mw);
+
+
+struct fielddesc {
+ const char *nameandfmt;
+ uint32 offset;
+ uint32 len;
+};
+
+extern void bcm_binit(struct bcmstrbuf *b, char *buf, uint size);
+extern int bcm_bprintf(struct bcmstrbuf *b, const char *fmt, ...);
+extern void bcm_inc_bytes(uchar *num, int num_bytes, uint8 amount);
+extern int bcm_cmp_bytes(uchar *arg1, uchar *arg2, uint8 nbytes);
+extern void bcm_print_bytes(char *name, const uchar *cdata, int len);
+
+typedef uint32 (*bcmutl_rdreg_rtn)(void *arg0, uint arg1, uint32 offset);
+extern uint bcmdumpfields(bcmutl_rdreg_rtn func_ptr, void *arg0, uint arg1, struct fielddesc *str,
+ char *buf, uint32 bufsize);
+
+extern uint bcm_mkiovar(char *name, char *data, uint datalen, char *buf, uint len);
+extern uint bcm_bitcount(uint8 *bitmap, uint bytelength);
+
+#if defined(WLTINYDUMP) || defined(WLMSG_INFORM) || defined(WLMSG_ASSOC) || \
+ defined(WLMSG_PRPKT) || defined(WLMSG_WSEC)
+extern int bcm_format_ssid(char* buf, const uchar ssid[], uint ssid_len);
+#endif
+
+
+#define SSID_FMT_BUF_LEN ((4 * DOT11_MAX_SSID_LEN) + 1)
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/bcmwifi.h b/drivers/net/wireless/bcm4329/include/bcmwifi.h
new file mode 100644
index 0000000..038aedc
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/bcmwifi.h
@@ -0,0 +1,154 @@
+/*
+ * Misc utility routines for WL and Apps
+ * This header file housing the define and function prototype use by
+ * both the wl driver, tools & Apps.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: bcmwifi.h,v 1.15.30.4 2010/03/10 20:10:52 Exp $
+ */
+
+
+#ifndef _bcmwifi_h_
+#define _bcmwifi_h_
+
+
+
+typedef uint16 chanspec_t;
+
+
+#define CH_UPPER_SB 0x01
+#define CH_LOWER_SB 0x02
+#define CH_EWA_VALID 0x04
+#define CH_20MHZ_APART 4
+#define CH_10MHZ_APART 2
+#define CH_5MHZ_APART 1
+#define CH_MAX_2G_CHANNEL 14
+#define WLC_MAX_2G_CHANNEL CH_MAX_2G_CHANNEL
+#define MAXCHANNEL 224
+
+#define WL_CHANSPEC_CHAN_MASK 0x00ff
+#define WL_CHANSPEC_CHAN_SHIFT 0
+
+#define WL_CHANSPEC_CTL_SB_MASK 0x0300
+#define WL_CHANSPEC_CTL_SB_SHIFT 8
+#define WL_CHANSPEC_CTL_SB_LOWER 0x0100
+#define WL_CHANSPEC_CTL_SB_UPPER 0x0200
+#define WL_CHANSPEC_CTL_SB_NONE 0x0300
+
+#define WL_CHANSPEC_BW_MASK 0x0C00
+#define WL_CHANSPEC_BW_SHIFT 10
+#define WL_CHANSPEC_BW_10 0x0400
+#define WL_CHANSPEC_BW_20 0x0800
+#define WL_CHANSPEC_BW_40 0x0C00
+
+#define WL_CHANSPEC_BAND_MASK 0xf000
+#define WL_CHANSPEC_BAND_SHIFT 12
+#define WL_CHANSPEC_BAND_5G 0x1000
+#define WL_CHANSPEC_BAND_2G 0x2000
+#define INVCHANSPEC 255
+
+
+#define WF_CHAN_FACTOR_2_4_G 4814
+#define WF_CHAN_FACTOR_5_G 10000
+#define WF_CHAN_FACTOR_4_G 8000
+
+
+#define LOWER_20_SB(channel) ((channel > CH_10MHZ_APART) ? (channel - CH_10MHZ_APART) : 0)
+#define UPPER_20_SB(channel) ((channel < (MAXCHANNEL - CH_10MHZ_APART)) ? \
+ (channel + CH_10MHZ_APART) : 0)
+#define CHSPEC_WLCBANDUNIT(chspec) (CHSPEC_IS5G(chspec) ? BAND_5G_INDEX : BAND_2G_INDEX)
+#define CH20MHZ_CHSPEC(channel) (chanspec_t)((chanspec_t)(channel) | WL_CHANSPEC_BW_20 | \
+ WL_CHANSPEC_CTL_SB_NONE | (((channel) <= CH_MAX_2G_CHANNEL) ? \
+ WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G))
+#define NEXT_20MHZ_CHAN(channel) ((channel < (MAXCHANNEL - CH_20MHZ_APART)) ? \
+ (channel + CH_20MHZ_APART) : 0)
+#define CH40MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \
+ ((channel) | (ctlsb) | WL_CHANSPEC_BW_40 | \
+ ((channel) <= CH_MAX_2G_CHANNEL ? WL_CHANSPEC_BAND_2G : \
+ WL_CHANSPEC_BAND_5G))
+#define CHSPEC_CHANNEL(chspec) ((uint8)(chspec & WL_CHANSPEC_CHAN_MASK))
+#define CHSPEC_BAND(chspec) (chspec & WL_CHANSPEC_BAND_MASK)
+
+#ifdef WL20MHZ_ONLY
+
+#define CHSPEC_CTL_SB(chspec) WL_CHANSPEC_CTL_SB_NONE
+#define CHSPEC_BW(chspec) WL_CHANSPEC_BW_20
+#define CHSPEC_IS10(chspec) 0
+#define CHSPEC_IS20(chspec) 1
+#ifndef CHSPEC_IS40
+#define CHSPEC_IS40(chspec) 0
+#endif
+
+#else
+
+#define CHSPEC_CTL_SB(chspec) (chspec & WL_CHANSPEC_CTL_SB_MASK)
+#define CHSPEC_BW(chspec) (chspec & WL_CHANSPEC_BW_MASK)
+#define CHSPEC_IS10(chspec) ((chspec & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_10)
+#define CHSPEC_IS20(chspec) ((chspec & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20)
+#ifndef CHSPEC_IS40
+#define CHSPEC_IS40(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40)
+#endif
+
+#endif
+
+#define CHSPEC_IS5G(chspec) ((chspec & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G)
+#define CHSPEC_IS2G(chspec) ((chspec & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_2G)
+#define CHSPEC_SB_NONE(chspec) ((chspec & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_NONE)
+#define CHSPEC_SB_UPPER(chspec) ((chspec & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_UPPER)
+#define CHSPEC_SB_LOWER(chspec) ((chspec & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_LOWER)
+#define CHSPEC_CTL_CHAN(chspec) ((CHSPEC_SB_LOWER(chspec)) ? \
+ (LOWER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))) : \
+ (UPPER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))))
+
+#define CHSPEC2WLC_BAND(chspec) (CHSPEC_IS5G((chspec))? WLC_BAND_5G: WLC_BAND_2G)
+
+#define CHANSPEC_STR_LEN 8
+
+
+#define WLC_MAXRATE 108
+#define WLC_RATE_1M 2
+#define WLC_RATE_2M 4
+#define WLC_RATE_5M5 11
+#define WLC_RATE_11M 22
+#define WLC_RATE_6M 12
+#define WLC_RATE_9M 18
+#define WLC_RATE_12M 24
+#define WLC_RATE_18M 36
+#define WLC_RATE_24M 48
+#define WLC_RATE_36M 72
+#define WLC_RATE_48M 96
+#define WLC_RATE_54M 108
+
+#define WLC_2G_25MHZ_OFFSET 5
+
+
+extern char * wf_chspec_ntoa(chanspec_t chspec, char *buf);
+
+
+extern chanspec_t wf_chspec_aton(char *a);
+
+
+extern int wf_mhz2channel(uint freq, uint start_factor);
+
+
+extern int wf_channel2mhz(uint channel, uint start_factor);
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/dhdioctl.h b/drivers/net/wireless/bcm4329/include/dhdioctl.h
new file mode 100644
index 0000000..980a143
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/dhdioctl.h
@@ -0,0 +1,123 @@
+/*
+ * Definitions for ioctls to access DHD iovars.
+ * Based on wlioctl.h (for Broadcom 802.11abg driver).
+ * (Moves towards generic ioctls for BCM drivers/iovars.)
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: dhdioctl.h,v 13.7.8.1.4.1.16.5 2010/05/21 21:49:38 Exp $
+ */
+
+#ifndef _dhdioctl_h_
+#define _dhdioctl_h_
+
+#include <typedefs.h>
+
+
+/* require default structure packing */
+#define BWL_DEFAULT_PACKING
+#include <packed_section_start.h>
+
+
+/* Linux network driver ioctl encoding */
+typedef struct dhd_ioctl {
+ uint cmd; /* common ioctl definition */
+ void *buf; /* pointer to user buffer */
+ uint len; /* length of user buffer */
+ bool set; /* get or set request (optional) */
+ uint used; /* bytes read or written (optional) */
+ uint needed; /* bytes needed (optional) */
+ uint driver; /* to identify target driver */
+} dhd_ioctl_t;
+
+/* per-driver magic numbers */
+#define DHD_IOCTL_MAGIC 0x00444944
+
+/* bump this number if you change the ioctl interface */
+#define DHD_IOCTL_VERSION 1
+
+#define DHD_IOCTL_MAXLEN 8192 /* max length ioctl buffer required */
+#define DHD_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */
+
+/* common ioctl definitions */
+#define DHD_GET_MAGIC 0
+#define DHD_GET_VERSION 1
+#define DHD_GET_VAR 2
+#define DHD_SET_VAR 3
+
+/* message levels */
+#define DHD_ERROR_VAL 0x0001
+#define DHD_TRACE_VAL 0x0002
+#define DHD_INFO_VAL 0x0004
+#define DHD_DATA_VAL 0x0008
+#define DHD_CTL_VAL 0x0010
+#define DHD_TIMER_VAL 0x0020
+#define DHD_HDRS_VAL 0x0040
+#define DHD_BYTES_VAL 0x0080
+#define DHD_INTR_VAL 0x0100
+#define DHD_LOG_VAL 0x0200
+#define DHD_GLOM_VAL 0x0400
+#define DHD_EVENT_VAL 0x0800
+#define DHD_BTA_VAL 0x1000
+#define DHD_ISCAN_VAL 0x2000
+
+#ifdef SDTEST
+/* For pktgen iovar */
+typedef struct dhd_pktgen {
+ uint version; /* To allow structure change tracking */
+ uint freq; /* Max ticks between tx/rx attempts */
+ uint count; /* Test packets to send/rcv each attempt */
+ uint print; /* Print counts every <print> attempts */
+ uint total; /* Total packets (or bursts) */
+ uint minlen; /* Minimum length of packets to send */
+ uint maxlen; /* Maximum length of packets to send */
+ uint numsent; /* Count of test packets sent */
+ uint numrcvd; /* Count of test packets received */
+ uint numfail; /* Count of test send failures */
+ uint mode; /* Test mode (type of test packets) */
+ uint stop; /* Stop after this many tx failures */
+} dhd_pktgen_t;
+
+/* Version in case structure changes */
+#define DHD_PKTGEN_VERSION 2
+
+/* Type of test packets to use */
+#define DHD_PKTGEN_ECHO 1 /* Send echo requests */
+#define DHD_PKTGEN_SEND 2 /* Send discard packets */
+#define DHD_PKTGEN_RXBURST 3 /* Request dongle send N packets */
+#define DHD_PKTGEN_RECV 4 /* Continuous rx from continuous tx dongle */
+#endif /* SDTEST */
+
+/* Enter idle immediately (no timeout) */
+#define DHD_IDLE_IMMEDIATE (-1)
+
+/* Values for idleclock iovar: other values are the sd_divisor to use when idle */
+#define DHD_IDLE_ACTIVE 0 /* Do not request any SD clock change when idle */
+#define DHD_IDLE_STOP (-1) /* Request SD clock be stopped (and use SD1 mode) */
+
+
+/* require default structure packing */
+#include <packed_section_end.h>
+
+
+#endif /* _dhdioctl_h_ */
diff --git a/drivers/net/wireless/bcm4329/include/epivers.h b/drivers/net/wireless/bcm4329/include/epivers.h
new file mode 100644
index 0000000..23ee514
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/epivers.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: epivers.h.in,v 13.25 2005/10/28 18:35:33 Exp $
+ *
+*/
+
+
+#ifndef _epivers_h_
+#define _epivers_h_
+
+#define EPI_MAJOR_VERSION 4
+
+#define EPI_MINOR_VERSION 218
+
+#define EPI_RC_NUMBER 248
+
+#define EPI_INCREMENTAL_NUMBER 18
+
+#define EPI_BUILD_NUMBER 0
+
+#define EPI_VERSION 4, 218, 248, 18
+
+#define EPI_VERSION_NUM 0x04daf812
+
+
+#define EPI_VERSION_STR "4.218.248.18"
+#define EPI_ROUTER_VERSION_STR "4.219.248.18"
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/hndpmu.h b/drivers/net/wireless/bcm4329/include/hndpmu.h
new file mode 100644
index 0000000..e829b3d
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/hndpmu.h
@@ -0,0 +1,34 @@
+/*
+ * HND SiliconBackplane PMU support.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: hndpmu.h,v 13.14.4.3.4.3.8.7 2010/04/09 13:20:51 Exp $
+ */
+
+#ifndef _hndpmu_h_
+#define _hndpmu_h_
+
+
+extern void si_pmu_otp_power(si_t *sih, osl_t *osh, bool on);
+extern void si_sdiod_drive_strength_init(si_t *sih, osl_t *osh, uint32 drivestrength);
+
+#endif /* _hndpmu_h_ */
diff --git a/drivers/net/wireless/bcm4329/include/hndrte_armtrap.h b/drivers/net/wireless/bcm4329/include/hndrte_armtrap.h
new file mode 100644
index 0000000..ca3281b
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/hndrte_armtrap.h
@@ -0,0 +1,88 @@
+/*
+ * HNDRTE arm trap handling.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: hndrte_armtrap.h,v 13.3.196.2 2010/07/15 19:06:11 Exp $
+ */
+
+#ifndef _hndrte_armtrap_h
+#define _hndrte_armtrap_h
+
+
+/* ARM trap handling */
+
+/* Trap types defined by ARM (see arminc.h) */
+
+/* Trap locations in lo memory */
+#define TRAP_STRIDE 4
+#define FIRST_TRAP TR_RST
+#define LAST_TRAP (TR_FIQ * TRAP_STRIDE)
+
+#if defined(__ARM_ARCH_4T__)
+#define MAX_TRAP_TYPE (TR_FIQ + 1)
+#elif defined(__ARM_ARCH_7M__)
+#define MAX_TRAP_TYPE (TR_ISR + ARMCM3_NUMINTS)
+#endif /* __ARM_ARCH_7M__ */
+
+/* The trap structure is defined here as offsets for assembly */
+#define TR_TYPE 0x00
+#define TR_EPC 0x04
+#define TR_CPSR 0x08
+#define TR_SPSR 0x0c
+#define TR_REGS 0x10
+#define TR_REG(n) (TR_REGS + (n) * 4)
+#define TR_SP TR_REG(13)
+#define TR_LR TR_REG(14)
+#define TR_PC TR_REG(15)
+
+#define TRAP_T_SIZE 80
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+#include <typedefs.h>
+
+typedef struct _trap_struct {
+ uint32 type;
+ uint32 epc;
+ uint32 cpsr;
+ uint32 spsr;
+ uint32 r0;
+ uint32 r1;
+ uint32 r2;
+ uint32 r3;
+ uint32 r4;
+ uint32 r5;
+ uint32 r6;
+ uint32 r7;
+ uint32 r8;
+ uint32 r9;
+ uint32 r10;
+ uint32 r11;
+ uint32 r12;
+ uint32 r13;
+ uint32 r14;
+ uint32 pc;
+} trap_t;
+
+#endif /* !_LANGUAGE_ASSEMBLY */
+
+#endif /* _hndrte_armtrap_h */
diff --git a/drivers/net/wireless/bcm4329/include/hndrte_cons.h b/drivers/net/wireless/bcm4329/include/hndrte_cons.h
new file mode 100644
index 0000000..a424174
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/hndrte_cons.h
@@ -0,0 +1,63 @@
+/*
+ * Console support for hndrte.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: hndrte_cons.h,v 13.1.2.4 2010/07/15 19:06:11 Exp $
+ */
+
+#include <typedefs.h>
+
+#define CBUF_LEN (128)
+
+#define LOG_BUF_LEN 1024
+
+typedef struct {
+ uint32 buf; /* Can't be pointer on (64-bit) hosts */
+ uint buf_size;
+ uint idx;
+ char *_buf_compat; /* Redundant pointer for backward compat. */
+} hndrte_log_t;
+
+typedef struct {
+ /* Virtual UART
+ * When there is no UART (e.g. Quickturn), the host should write a complete
+ * input line directly into cbuf and then write the length into vcons_in.
+ * This may also be used when there is a real UART (at risk of conflicting with
+ * the real UART). vcons_out is currently unused.
+ */
+ volatile uint vcons_in;
+ volatile uint vcons_out;
+
+ /* Output (logging) buffer
+ * Console output is written to a ring buffer log_buf at index log_idx.
+ * The host may read the output when it sees log_idx advance.
+ * Output will be lost if the output wraps around faster than the host polls.
+ */
+ hndrte_log_t log;
+
+ /* Console input line buffer
+ * Characters are read one at a time into cbuf until <CR> is received, then
+ * the buffer is processed as a command line. Also used for virtual UART.
+ */
+ uint cbuf_idx;
+ char cbuf[CBUF_LEN];
+} hndrte_cons_t;
diff --git a/drivers/net/wireless/bcm4329/include/hndsoc.h b/drivers/net/wireless/bcm4329/include/hndsoc.h
new file mode 100644
index 0000000..3542417
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/hndsoc.h
@@ -0,0 +1,195 @@
+/*
+ * Broadcom HND chip & on-chip-interconnect-related definitions.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: hndsoc.h,v 13.3.10.3 2008/08/06 03:43:25 Exp $
+ */
+
+#ifndef _HNDSOC_H
+#define _HNDSOC_H
+
+/* Include the soci specific files */
+#include <sbconfig.h>
+#include <aidmp.h>
+
+/*
+ * SOC Interconnect Address Map.
+ * All regions may not exist on all chips.
+ */
+#define SI_SDRAM_BASE 0x00000000 /* Physical SDRAM */
+#define SI_PCI_MEM 0x08000000 /* Host Mode sb2pcitranslation0 (64 MB) */
+#define SI_PCI_MEM_SZ (64 * 1024 * 1024)
+#define SI_PCI_CFG 0x0c000000 /* Host Mode sb2pcitranslation1 (64 MB) */
+#define SI_SDRAM_SWAPPED 0x10000000 /* Byteswapped Physical SDRAM */
+
+#define SI_ENUM_BASE 0x18000000 /* Enumeration space base */
+#define SI_CORE_SIZE 0x1000 /* each core gets 4Kbytes for registers */
+#ifndef SI_MAXCORES
+#define SI_MAXCORES 16 /* Max cores (this is arbitrary, for software
+ * convenience and could be changed if we
+ * make any larger chips
+ */
+#endif
+
+#define SI_FASTRAM 0x19000000 /* On-chip RAM on chips that also have DDR */
+
+#define SI_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */
+#define SI_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */
+#define SI_ARMCM3_ROM 0x1e000000 /* ARM Cortex-M3 ROM */
+#define SI_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */
+#define SI_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */
+#define SI_ARM7S_ROM 0x20000000 /* ARM7TDMI-S ROM */
+#define SI_ARMCM3_SRAM2 0x60000000 /* ARM Cortex-M3 SRAM Region 2 */
+#define SI_ARM7S_SRAM2 0x80000000 /* ARM7TDMI-S SRAM Region 2 */
+#define SI_ARM_FLASH1 0xffff0000 /* ARM Flash Region 1 */
+#define SI_ARM_FLASH1_SZ 0x00010000 /* ARM Size of Flash Region 1 */
+
+#define SI_PCI_DMA 0x40000000 /* Client Mode sb2pcitranslation2 (1 GB) */
+#define SI_PCI_DMA2 0x80000000 /* Client Mode sb2pcitranslation2 (1 GB) */
+#define SI_PCI_DMA_SZ 0x40000000 /* Client Mode sb2pcitranslation2 size in bytes */
+#define SI_PCIE_DMA_L32 0x00000000 /* PCIE Client Mode sb2pcitranslation2
+ * (2 ZettaBytes), low 32 bits
+ */
+#define SI_PCIE_DMA_H32 0x80000000 /* PCIE Client Mode sb2pcitranslation2
+ * (2 ZettaBytes), high 32 bits
+ */
+
+/* core codes */
+#define NODEV_CORE_ID 0x700 /* Invalid coreid */
+#define CC_CORE_ID 0x800 /* chipcommon core */
+#define ILINE20_CORE_ID 0x801 /* iline20 core */
+#define SRAM_CORE_ID 0x802 /* sram core */
+#define SDRAM_CORE_ID 0x803 /* sdram core */
+#define PCI_CORE_ID 0x804 /* pci core */
+#define MIPS_CORE_ID 0x805 /* mips core */
+#define ENET_CORE_ID 0x806 /* enet mac core */
+#define CODEC_CORE_ID 0x807 /* v90 codec core */
+#define USB_CORE_ID 0x808 /* usb 1.1 host/device core */
+#define ADSL_CORE_ID 0x809 /* ADSL core */
+#define ILINE100_CORE_ID 0x80a /* iline100 core */
+#define IPSEC_CORE_ID 0x80b /* ipsec core */
+#define UTOPIA_CORE_ID 0x80c /* utopia core */
+#define PCMCIA_CORE_ID 0x80d /* pcmcia core */
+#define SOCRAM_CORE_ID 0x80e /* internal memory core */
+#define MEMC_CORE_ID 0x80f /* memc sdram core */
+#define OFDM_CORE_ID 0x810 /* OFDM phy core */
+#define EXTIF_CORE_ID 0x811 /* external interface core */
+#define D11_CORE_ID 0x812 /* 802.11 MAC core */
+#define APHY_CORE_ID 0x813 /* 802.11a phy core */
+#define BPHY_CORE_ID 0x814 /* 802.11b phy core */
+#define GPHY_CORE_ID 0x815 /* 802.11g phy core */
+#define MIPS33_CORE_ID 0x816 /* mips3302 core */
+#define USB11H_CORE_ID 0x817 /* usb 1.1 host core */
+#define USB11D_CORE_ID 0x818 /* usb 1.1 device core */
+#define USB20H_CORE_ID 0x819 /* usb 2.0 host core */
+#define USB20D_CORE_ID 0x81a /* usb 2.0 device core */
+#define SDIOH_CORE_ID 0x81b /* sdio host core */
+#define ROBO_CORE_ID 0x81c /* roboswitch core */
+#define ATA100_CORE_ID 0x81d /* parallel ATA core */
+#define SATAXOR_CORE_ID 0x81e /* serial ATA & XOR DMA core */
+#define GIGETH_CORE_ID 0x81f /* gigabit ethernet core */
+#define PCIE_CORE_ID 0x820 /* pci express core */
+#define NPHY_CORE_ID 0x821 /* 802.11n 2x2 phy core */
+#define SRAMC_CORE_ID 0x822 /* SRAM controller core */
+#define MINIMAC_CORE_ID 0x823 /* MINI MAC/phy core */
+#define ARM11_CORE_ID 0x824 /* ARM 1176 core */
+#define ARM7S_CORE_ID 0x825 /* ARM7tdmi-s core */
+#define LPPHY_CORE_ID 0x826 /* 802.11a/b/g phy core */
+#define PMU_CORE_ID 0x827 /* PMU core */
+#define SSNPHY_CORE_ID 0x828 /* 802.11n single-stream phy core */
+#define SDIOD_CORE_ID 0x829 /* SDIO device core */
+#define ARMCM3_CORE_ID 0x82a /* ARM Cortex M3 core */
+#define QNPHY_CORE_ID 0x82b /* 802.11n 4x4 phy core */
+#define MIPS74K_CORE_ID 0x82c /* mips 74k core */
+#define GMAC_CORE_ID 0x82d /* Gigabit MAC core */
+#define DMEMC_CORE_ID 0x82e /* DDR1/2 memory controller core */
+#define PCIERC_CORE_ID 0x82f /* PCIE Root Complex core */
+#define OCP_CORE_ID 0x830 /* OCP2OCP bridge core */
+#define SC_CORE_ID 0x831 /* shared common core */
+#define AHB_CORE_ID 0x832 /* OCP2AHB bridge core */
+#define SPIH_CORE_ID 0x833 /* SPI host core */
+#define I2S_CORE_ID 0x834 /* I2S core */
+#define OOB_ROUTER_CORE_ID 0x367 /* OOB router core ID */
+#define DEF_AI_COMP 0xfff /* Default component, in ai chips it maps all
+ * unused address ranges
+ */
+
+/* There are TWO constants on all HND chips: SI_ENUM_BASE above,
+ * and chipcommon being the first core:
+ */
+#define SI_CC_IDX 0
+
+/* SOC Interconnect types (aka chip types) */
+#define SOCI_SB 0
+#define SOCI_AI 1
+
+/* Common core control flags */
+#define SICF_BIST_EN 0x8000
+#define SICF_PME_EN 0x4000
+#define SICF_CORE_BITS 0x3ffc
+#define SICF_FGC 0x0002
+#define SICF_CLOCK_EN 0x0001
+
+/* Common core status flags */
+#define SISF_BIST_DONE 0x8000
+#define SISF_BIST_ERROR 0x4000
+#define SISF_GATED_CLK 0x2000
+#define SISF_DMA64 0x1000
+#define SISF_CORE_BITS 0x0fff
+
+/* A register that is common to all cores to
+ * communicate w/PMU regarding clock control.
+ */
+#define SI_CLK_CTL_ST 0x1e0 /* clock control and status */
+
+/* clk_ctl_st register */
+#define CCS_FORCEALP 0x00000001 /* force ALP request */
+#define CCS_FORCEHT 0x00000002 /* force HT request */
+#define CCS_FORCEILP 0x00000004 /* force ILP request */
+#define CCS_ALPAREQ 0x00000008 /* ALP Avail Request */
+#define CCS_HTAREQ 0x00000010 /* HT Avail Request */
+#define CCS_FORCEHWREQOFF 0x00000020 /* Force HW Clock Request Off */
+#define CCS_ALPAVAIL 0x00010000 /* ALP is available */
+#define CCS_HTAVAIL 0x00020000 /* HT is available */
+#define CCS0_HTAVAIL 0x00010000 /* HT avail in chipc and pcmcia on 4328a0 */
+#define CCS0_ALPAVAIL 0x00020000 /* ALP avail in chipc and pcmcia on 4328a0 */
+
+/* Not really related to SOC Interconnect, but a couple of software
+ * conventions for the use the flash space:
+ */
+
+/* Minumum amount of flash we support */
+#define FLASH_MIN 0x00020000 /* Minimum flash size */
+
+/* A boot/binary may have an embedded block that describes its size */
+#define BISZ_OFFSET 0x3e0 /* At this offset into the binary */
+#define BISZ_MAGIC 0x4249535a /* Marked with this value: 'BISZ' */
+#define BISZ_MAGIC_IDX 0 /* Word 0: magic */
+#define BISZ_TXTST_IDX 1 /* 1: text start */
+#define BISZ_TXTEND_IDX 2 /* 2: text end */
+#define BISZ_DATAST_IDX 3 /* 3: data start */
+#define BISZ_DATAEND_IDX 4 /* 4: data end */
+#define BISZ_BSSST_IDX 5 /* 5: bss start */
+#define BISZ_BSSEND_IDX 6 /* 6: bss end */
+#define BISZ_SIZE 7 /* descriptor size in 32-bit intergers */
+
+#endif /* _HNDSOC_H */
diff --git a/drivers/net/wireless/bcm4329/include/linux_osl.h b/drivers/net/wireless/bcm4329/include/linux_osl.h
new file mode 100644
index 0000000..b059c2a
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/linux_osl.h
@@ -0,0 +1,322 @@
+/*
+ * Linux OS Independent Layer
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: linux_osl.h,v 13.131.30.8 2010/04/26 05:42:18 Exp $
+ */
+
+
+#ifndef _linux_osl_h_
+#define _linux_osl_h_
+
+#include <typedefs.h>
+
+
+#include <linuxver.h>
+
+
+#ifdef __GNUC__
+#define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
+#if GCC_VERSION > 30100
+#define ASSERT(exp) do {} while (0)
+#else
+
+#define ASSERT(exp)
+#endif
+#endif
+
+
+#define OSL_DELAY(usec) osl_delay(usec)
+extern void osl_delay(uint usec);
+
+
+
+#define OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
+ osl_pcmcia_read_attr((osh), (offset), (buf), (size))
+#define OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
+ osl_pcmcia_write_attr((osh), (offset), (buf), (size))
+extern void osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size);
+extern void osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size);
+
+
+#define OSL_PCI_READ_CONFIG(osh, offset, size) \
+ osl_pci_read_config((osh), (offset), (size))
+#define OSL_PCI_WRITE_CONFIG(osh, offset, size, val) \
+ osl_pci_write_config((osh), (offset), (size), (val))
+extern uint32 osl_pci_read_config(osl_t *osh, uint offset, uint size);
+extern void osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val);
+
+
+#define OSL_PCI_BUS(osh) osl_pci_bus(osh)
+#define OSL_PCI_SLOT(osh) osl_pci_slot(osh)
+extern uint osl_pci_bus(osl_t *osh);
+extern uint osl_pci_slot(osl_t *osh);
+
+
+typedef struct {
+ bool pkttag;
+ uint pktalloced;
+ bool mmbus;
+ pktfree_cb_fn_t tx_fn;
+ void *tx_ctx;
+} osl_pubinfo_t;
+
+
+extern osl_t *osl_attach(void *pdev, uint bustype, bool pkttag);
+extern void osl_detach(osl_t *osh);
+
+#define PKTFREESETCB(osh, _tx_fn, _tx_ctx) \
+ do { \
+ ((osl_pubinfo_t*)osh)->tx_fn = _tx_fn; \
+ ((osl_pubinfo_t*)osh)->tx_ctx = _tx_ctx; \
+ } while (0)
+
+
+#define BUS_SWAP32(v) (v)
+
+
+#define MALLOC(osh, size) osl_malloc((osh), (size))
+#define MFREE(osh, addr, size) osl_mfree((osh), (addr), (size))
+#define MALLOCED(osh) osl_malloced((osh))
+
+
+#define MALLOC_FAILED(osh) osl_malloc_failed((osh))
+
+extern void *osl_malloc(osl_t *osh, uint size);
+extern void osl_mfree(osl_t *osh, void *addr, uint size);
+extern uint osl_malloced(osl_t *osh);
+extern uint osl_malloc_failed(osl_t *osh);
+
+
+#define DMA_CONSISTENT_ALIGN PAGE_SIZE
+#define DMA_ALLOC_CONSISTENT(osh, size, pap, dmah, alignbits) \
+ osl_dma_alloc_consistent((osh), (size), (pap))
+#define DMA_FREE_CONSISTENT(osh, va, size, pa, dmah) \
+ osl_dma_free_consistent((osh), (void*)(va), (size), (pa))
+extern void *osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap);
+extern void osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa);
+
+
+#define DMA_TX 1
+#define DMA_RX 2
+
+
+#define DMA_MAP(osh, va, size, direction, p, dmah) \
+ osl_dma_map((osh), (va), (size), (direction))
+#define DMA_UNMAP(osh, pa, size, direction, p, dmah) \
+ osl_dma_unmap((osh), (pa), (size), (direction))
+extern uint osl_dma_map(osl_t *osh, void *va, uint size, int direction);
+extern void osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction);
+
+
+#define OSL_DMADDRWIDTH(osh, addrwidth) do {} while (0)
+
+
+#include <bcmsdh.h>
+#define OSL_WRITE_REG(osh, r, v) (bcmsdh_reg_write(NULL, (uintptr)(r), sizeof(*(r)), (v)))
+#define OSL_READ_REG(osh, r) (bcmsdh_reg_read(NULL, (uintptr)(r), sizeof(*(r))))
+
+#define SELECT_BUS_WRITE(osh, mmap_op, bus_op) if (((osl_pubinfo_t*)(osh))->mmbus) \
+ mmap_op else bus_op
+#define SELECT_BUS_READ(osh, mmap_op, bus_op) (((osl_pubinfo_t*)(osh))->mmbus) ? \
+ mmap_op : bus_op
+
+
+
+
+#ifndef printf
+#define printf(fmt, args...) printk(fmt, ## args)
+#endif
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+
+#ifndef IL_BIGENDIAN
+#define R_REG(osh, r) (\
+ SELECT_BUS_READ(osh, sizeof(*(r)) == sizeof(uint8) ? readb((volatile uint8*)(r)) : \
+ sizeof(*(r)) == sizeof(uint16) ? readw((volatile uint16*)(r)) : \
+ readl((volatile uint32*)(r)), OSL_READ_REG(osh, r)) \
+)
+#define W_REG(osh, r, v) do { \
+ SELECT_BUS_WRITE(osh, \
+ switch (sizeof(*(r))) { \
+ case sizeof(uint8): writeb((uint8)(v), (volatile uint8*)(r)); break; \
+ case sizeof(uint16): writew((uint16)(v), (volatile uint16*)(r)); break; \
+ case sizeof(uint32): writel((uint32)(v), (volatile uint32*)(r)); break; \
+ }, \
+ (OSL_WRITE_REG(osh, r, v))); \
+ } while (0)
+#else
+#define R_REG(osh, r) (\
+ SELECT_BUS_READ(osh, \
+ ({ \
+ __typeof(*(r)) __osl_v; \
+ switch (sizeof(*(r))) { \
+ case sizeof(uint8): __osl_v = \
+ readb((volatile uint8*)((uintptr)(r)^3)); break; \
+ case sizeof(uint16): __osl_v = \
+ readw((volatile uint16*)((uintptr)(r)^2)); break; \
+ case sizeof(uint32): __osl_v = \
+ readl((volatile uint32*)(r)); break; \
+ } \
+ __osl_v; \
+ }), \
+ OSL_READ_REG(osh, r)) \
+)
+#define W_REG(osh, r, v) do { \
+ SELECT_BUS_WRITE(osh, \
+ switch (sizeof(*(r))) { \
+ case sizeof(uint8): writeb((uint8)(v), \
+ (volatile uint8*)((uintptr)(r)^3)); break; \
+ case sizeof(uint16): writew((uint16)(v), \
+ (volatile uint16*)((uintptr)(r)^2)); break; \
+ case sizeof(uint32): writel((uint32)(v), \
+ (volatile uint32*)(r)); break; \
+ }, \
+ (OSL_WRITE_REG(osh, r, v))); \
+ } while (0)
+#endif
+
+#define AND_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) & (v))
+#define OR_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) | (v))
+
+
+#define bcopy(src, dst, len) memcpy((dst), (src), (len))
+#define bcmp(b1, b2, len) memcmp((b1), (b2), (len))
+#define bzero(b, len) memset((b), '\0', (len))
+
+
+#define OSL_UNCACHED(va) ((void*)va)
+
+
+#if defined(__i386__)
+#define OSL_GETCYCLES(x) rdtscl((x))
+#else
+#define OSL_GETCYCLES(x) ((x) = 0)
+#endif
+
+
+#define BUSPROBE(val, addr) ({ (val) = R_REG(NULL, (addr)); 0; })
+
+
+#if !defined(CONFIG_MMC_MSM7X00A)
+#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
+#else
+#define REG_MAP(pa, size) (void *)(0)
+#endif
+#define REG_UNMAP(va) iounmap((va))
+
+
+#define R_SM(r) *(r)
+#define W_SM(r, v) (*(r) = (v))
+#define BZERO_SM(r, len) memset((r), '\0', (len))
+
+
+#define PKTGET(osh, len, send) osl_pktget((osh), (len))
+#define PKTFREE(osh, skb, send) osl_pktfree((osh), (skb), (send))
+#ifdef DHD_USE_STATIC_BUF
+#define PKTGET_STATIC(osh, len, send) osl_pktget_static((osh), (len))
+#define PKTFREE_STATIC(osh, skb, send) osl_pktfree_static((osh), (skb), (send))
+#endif
+#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data)
+#define PKTLEN(osh, skb) (((struct sk_buff*)(skb))->len)
+#define PKTHEADROOM(osh, skb) (PKTDATA(osh, skb)-(((struct sk_buff*)(skb))->head))
+#define PKTTAILROOM(osh, skb) ((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
+#define PKTNEXT(osh, skb) (((struct sk_buff*)(skb))->next)
+#define PKTSETNEXT(osh, skb, x) (((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
+#define PKTSETLEN(osh, skb, len) __skb_trim((struct sk_buff*)(skb), (len))
+#define PKTPUSH(osh, skb, bytes) skb_push((struct sk_buff*)(skb), (bytes))
+#define PKTPULL(osh, skb, bytes) skb_pull((struct sk_buff*)(skb), (bytes))
+#define PKTDUP(osh, skb) osl_pktdup((osh), (skb))
+#define PKTTAG(skb) ((void*)(((struct sk_buff*)(skb))->cb))
+#define PKTALLOCED(osh) ((osl_pubinfo_t *)(osh))->pktalloced
+#define PKTSETPOOL(osh, skb, x, y) do {} while (0)
+#define PKTPOOL(osh, skb) FALSE
+#define PKTPOOLLEN(osh, pktp) (0)
+#define PKTPOOLAVAIL(osh, pktp) (0)
+#define PKTPOOLADD(osh, pktp, p) BCME_ERROR
+#define PKTPOOLGET(osh, pktp) NULL
+#define PKTLIST_DUMP(osh, buf)
+
+extern void *osl_pktget(osl_t *osh, uint len);
+extern void osl_pktfree(osl_t *osh, void *skb, bool send);
+extern void *osl_pktget_static(osl_t *osh, uint len);
+extern void osl_pktfree_static(osl_t *osh, void *skb, bool send);
+extern void *osl_pktdup(osl_t *osh, void *skb);
+
+
+
+static INLINE void *
+osl_pkt_frmnative(osl_pubinfo_t *osh, struct sk_buff *skb)
+{
+ struct sk_buff *nskb;
+
+ if (osh->pkttag)
+ bzero((void*)skb->cb, OSL_PKTTAG_SZ);
+
+
+ for (nskb = skb; nskb; nskb = nskb->next) {
+ osh->pktalloced++;
+ }
+
+ return (void *)skb;
+}
+#define PKTFRMNATIVE(osh, skb) osl_pkt_frmnative(((osl_pubinfo_t *)osh), (struct sk_buff*)(skb))
+
+
+static INLINE struct sk_buff *
+osl_pkt_tonative(osl_pubinfo_t *osh, void *pkt)
+{
+ struct sk_buff *nskb;
+
+ if (osh->pkttag)
+ bzero(((struct sk_buff*)pkt)->cb, OSL_PKTTAG_SZ);
+
+
+ for (nskb = (struct sk_buff *)pkt; nskb; nskb = nskb->next) {
+ osh->pktalloced--;
+ }
+
+ return (struct sk_buff *)pkt;
+}
+#define PKTTONATIVE(osh, pkt) osl_pkt_tonative((osl_pubinfo_t *)(osh), (pkt))
+
+#define PKTLINK(skb) (((struct sk_buff*)(skb))->prev)
+#define PKTSETLINK(skb, x) (((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
+#define PKTPRIO(skb) (((struct sk_buff*)(skb))->priority)
+#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x))
+#define PKTSUMNEEDED(skb) (((struct sk_buff*)(skb))->ip_summed == CHECKSUM_HW)
+#define PKTSETSUMGOOD(skb, x) (((struct sk_buff*)(skb))->ip_summed = \
+ ((x) ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE))
+
+#define PKTSHARED(skb) (((struct sk_buff*)(skb))->cloned)
+
+
+#define OSL_ERROR(bcmerror) osl_error(bcmerror)
+extern int osl_error(int bcmerror);
+
+
+#define PKTBUFSZ 2048
+
+
+#define OSL_SYSUPTIME() ((uint32)jiffies * (1000 / HZ))
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/linuxver.h b/drivers/net/wireless/bcm4329/include/linuxver.h
new file mode 100644
index 0000000..6ed2265
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/linuxver.h
@@ -0,0 +1,447 @@
+/*
+ * Linux-specific abstractions to gain some independence from linux kernel versions.
+ * Pave over some 2.2 versus 2.4 versus 2.6 kernel differences.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: linuxver.h,v 13.38.8.1.8.6 2010/04/29 05:00:46 Exp $
+ */
+
+
+#ifndef _linuxver_h_
+#define _linuxver_h_
+
+#include <linux/version.h>
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
+#include <linux/config.h>
+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 33))
+#include <linux/autoconf.h>
+#endif
+#include <linux/module.h>
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 0))
+
+#ifdef __UNDEF_NO_VERSION__
+#undef __NO_VERSION__
+#else
+#define __NO_VERSION__
+#endif
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 0)
+#define module_param(_name_, _type_, _perm_) MODULE_PARM(_name_, "i")
+#define module_param_string(_name_, _string_, _size_, _perm_) \
+ MODULE_PARM(_string_, "c" __MODULE_STRING(_size_))
+#endif
+
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 9))
+#include <linux/malloc.h>
+#else
+#include <linux/slab.h>
+#endif
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/semaphore.h>
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28))
+#undef IP_TOS
+#endif
+#include <asm/io.h>
+
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 5, 41))
+#include <linux/workqueue.h>
+#else
+#include <linux/tqueue.h>
+#ifndef work_struct
+#define work_struct tq_struct
+#endif
+#ifndef INIT_WORK
+#define INIT_WORK(_work, _func, _data) INIT_TQUEUE((_work), (_func), (_data))
+#endif
+#ifndef schedule_work
+#define schedule_work(_work) schedule_task((_work))
+#endif
+#ifndef flush_scheduled_work
+#define flush_scheduled_work() flush_scheduled_tasks()
+#endif
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
+#define MY_INIT_WORK(_work, _func, _data) INIT_WORK(_work, _func)
+#else
+#define MY_INIT_WORK(_work, _func, _data) INIT_WORK(_work, _func, _data)
+typedef void (*work_func_t)(void *work);
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
+
+#ifndef IRQ_NONE
+typedef void irqreturn_t;
+#define IRQ_NONE
+#define IRQ_HANDLED
+#define IRQ_RETVAL(x)
+#endif
+#else
+typedef irqreturn_t(*FN_ISR) (int irq, void *dev_id, struct pt_regs *ptregs);
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 18)
+#define IRQF_SHARED SA_SHIRQ
+#endif
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 17)
+#ifdef CONFIG_NET_RADIO
+#define CONFIG_WIRELESS_EXT
+#endif
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 5, 67)
+#ifndef SANDGATE2G
+#define MOD_INC_USE_COUNT
+#endif
+#endif
+
+
+#ifndef __exit
+#define __exit
+#endif
+#ifndef __devexit
+#define __devexit
+#endif
+#ifndef __devinit
+#define __devinit __init
+#endif
+#ifndef __devinitdata
+#define __devinitdata
+#endif
+#ifndef __devexit_p
+#define __devexit_p(x) x
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 0))
+
+#define pci_get_drvdata(dev) (dev)->sysdata
+#define pci_set_drvdata(dev, value) (dev)->sysdata = (value)
+
+
+
+struct pci_device_id {
+ unsigned int vendor, device;
+ unsigned int subvendor, subdevice;
+ unsigned int class, class_mask;
+ unsigned long driver_data;
+};
+
+struct pci_driver {
+ struct list_head node;
+ char *name;
+ const struct pci_device_id *id_table;
+ int (*probe)(struct pci_dev *dev,
+ const struct pci_device_id *id);
+ void (*remove)(struct pci_dev *dev);
+ void (*suspend)(struct pci_dev *dev);
+ void (*resume)(struct pci_dev *dev);
+};
+
+#define MODULE_DEVICE_TABLE(type, name)
+#define PCI_ANY_ID (~0)
+
+
+#define pci_module_init pci_register_driver
+extern int pci_register_driver(struct pci_driver *drv);
+extern void pci_unregister_driver(struct pci_driver *drv);
+
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 18))
+#define pci_module_init pci_register_driver
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 2, 18))
+#ifdef MODULE
+#define module_init(x) int init_module(void) { return x(); }
+#define module_exit(x) void cleanup_module(void) { x(); }
+#else
+#define module_init(x) __initcall(x);
+#define module_exit(x) __exitcall(x);
+#endif
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 48))
+#define list_for_each(pos, head) \
+ for (pos = (head)->next; pos != (head); pos = pos->next)
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 13))
+#define pci_resource_start(dev, bar) ((dev)->base_address[(bar)])
+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 44))
+#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 23))
+#define pci_enable_device(dev) do { } while (0)
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 14))
+#define net_device device
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 42))
+
+
+
+#ifndef PCI_DMA_TODEVICE
+#define PCI_DMA_TODEVICE 1
+#define PCI_DMA_FROMDEVICE 2
+#endif
+
+typedef u32 dma_addr_t;
+
+
+static inline int get_order(unsigned long size)
+{
+ int order;
+
+ size = (size-1) >> (PAGE_SHIFT-1);
+ order = -1;
+ do {
+ size >>= 1;
+ order++;
+ } while (size);
+ return order;
+}
+
+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+ dma_addr_t *dma_handle)
+{
+ void *ret;
+ int gfp = GFP_ATOMIC | GFP_DMA;
+
+ ret = (void *)__get_free_pages(gfp, get_order(size));
+
+ if (ret != NULL) {
+ memset(ret, 0, size);
+ *dma_handle = virt_to_bus(ret);
+ }
+ return ret;
+}
+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ free_pages((unsigned long)vaddr, get_order(size));
+}
+#define pci_map_single(cookie, address, size, dir) virt_to_bus(address)
+#define pci_unmap_single(cookie, address, size, dir)
+
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 3, 43))
+
+#define dev_kfree_skb_any(a) dev_kfree_skb(a)
+#define netif_down(dev) do { (dev)->start = 0; } while (0)
+
+
+#ifndef _COMPAT_NETDEVICE_H
+
+
+
+#define dev_kfree_skb_irq(a) dev_kfree_skb(a)
+#define netif_wake_queue(dev) \
+ do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while (0)
+#define netif_stop_queue(dev) set_bit(0, &(dev)->tbusy)
+
+static inline void netif_start_queue(struct net_device *dev)
+{
+ dev->tbusy = 0;
+ dev->interrupt = 0;
+ dev->start = 1;
+}
+
+#define netif_queue_stopped(dev) (dev)->tbusy
+#define netif_running(dev) (dev)->start
+
+#endif
+
+#define netif_device_attach(dev) netif_start_queue(dev)
+#define netif_device_detach(dev) netif_stop_queue(dev)
+
+
+#define tasklet_struct tq_struct
+static inline void tasklet_schedule(struct tasklet_struct *tasklet)
+{
+ queue_task(tasklet, &tq_immediate);
+ mark_bh(IMMEDIATE_BH);
+}
+
+static inline void tasklet_init(struct tasklet_struct *tasklet,
+ void (*func)(unsigned long),
+ unsigned long data)
+{
+ tasklet->next = NULL;
+ tasklet->sync = 0;
+ tasklet->routine = (void (*)(void *))func;
+ tasklet->data = (void *)data;
+}
+#define tasklet_kill(tasklet) { do {} while (0); }
+
+
+#define del_timer_sync(timer) del_timer(timer)
+
+#else
+
+#define netif_down(dev)
+
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 3))
+
+
+#define PREPARE_TQUEUE(_tq, _routine, _data) \
+ do { \
+ (_tq)->routine = _routine; \
+ (_tq)->data = _data; \
+ } while (0)
+
+
+#define INIT_TQUEUE(_tq, _routine, _data) \
+ do { \
+ INIT_LIST_HEAD(&(_tq)->list); \
+ (_tq)->sync = 0; \
+ PREPARE_TQUEUE((_tq), (_routine), (_data)); \
+ } while (0)
+
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 6))
+
+
+
+static inline int
+pci_save_state(struct pci_dev *dev, u32 *buffer)
+{
+ int i;
+ if (buffer) {
+ for (i = 0; i < 16; i++)
+ pci_read_config_dword(dev, i * 4, &buffer[i]);
+ }
+ return 0;
+}
+
+static inline int
+pci_restore_state(struct pci_dev *dev, u32 *buffer)
+{
+ int i;
+
+ if (buffer) {
+ for (i = 0; i < 16; i++)
+ pci_write_config_dword(dev, i * 4, buffer[i]);
+ }
+
+ else {
+ for (i = 0; i < 6; i ++)
+ pci_write_config_dword(dev,
+ PCI_BASE_ADDRESS_0 + (i * 4),
+ pci_resource_start(dev, i));
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ }
+ return 0;
+}
+
+#endif
+
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 19))
+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
+#endif
+
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 24))
+#ifndef SET_MODULE_OWNER
+#define SET_MODULE_OWNER(dev) do {} while (0)
+#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
+#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
+#else
+#define OLD_MOD_INC_USE_COUNT do {} while (0)
+#define OLD_MOD_DEC_USE_COUNT do {} while (0)
+#endif
+#else
+#ifndef SET_MODULE_OWNER
+#define SET_MODULE_OWNER(dev) do {} while (0)
+#endif
+#ifndef MOD_INC_USE_COUNT
+#define MOD_INC_USE_COUNT do {} while (0)
+#endif
+#ifndef MOD_DEC_USE_COUNT
+#define MOD_DEC_USE_COUNT do {} while (0)
+#endif
+#define OLD_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
+#define OLD_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
+#endif
+
+#ifndef SET_NETDEV_DEV
+#define SET_NETDEV_DEV(net, pdev) do {} while (0)
+#endif
+
+#ifndef HAVE_FREE_NETDEV
+#define free_netdev(dev) kfree(dev)
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
+
+#define af_packet_priv data
+#endif
+
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 11)
+#define DRV_SUSPEND_STATE_TYPE pm_message_t
+#else
+#define DRV_SUSPEND_STATE_TYPE uint32
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
+#define CHECKSUM_HW CHECKSUM_PARTIAL
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+#define KILL_PROC(pid, sig) \
+{ \
+ struct task_struct *tsk; \
+ tsk = pid_task(find_vpid(pid), PIDTYPE_PID); \
+ if (tsk) send_sig(sig, tsk, 1); \
+}
+#else
+#define KILL_PROC(pid, sig) \
+{ \
+ kill_proc(pid, sig, 1); \
+}
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 0))
+#define netdev_priv(dev) dev->priv
+#endif
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/miniopt.h b/drivers/net/wireless/bcm4329/include/miniopt.h
new file mode 100644
index 0000000..3667fb1
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/miniopt.h
@@ -0,0 +1,77 @@
+/*
+ * Command line options parser.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: miniopt.h,v 1.1.6.2 2009/01/14 23:52:48 Exp $
+ */
+
+
+#ifndef MINI_OPT_H
+#define MINI_OPT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Constants and Types ---------------------------------------------- */
+
+#define MINIOPT_MAXKEY 128 /* Max options */
+typedef struct miniopt {
+
+ /* These are persistent after miniopt_init() */
+ const char* name; /* name for prompt in error strings */
+ const char* flags; /* option chars that take no args */
+ bool longflags; /* long options may be flags */
+ bool opt_end; /* at end of options (passed a "--") */
+
+ /* These are per-call to miniopt() */
+
+ int consumed; /* number of argv entries cosumed in
+ * the most recent call to miniopt()
+ */
+ bool positional;
+ bool good_int; /* 'val' member is the result of a sucessful
+ * strtol conversion of the option value
+ */
+ char opt;
+ char key[MINIOPT_MAXKEY];
+ char* valstr; /* positional param, or value for the option,
+ * or null if the option had
+ * no accompanying value
+ */
+ uint uval; /* strtol translation of valstr */
+ int val; /* strtol translation of valstr */
+} miniopt_t;
+
+void miniopt_init(miniopt_t *t, const char* name, const char* flags, bool longflags);
+int miniopt(miniopt_t *t, char **argv);
+
+
+/* ---- Variable Externs ------------------------------------------------- */
+/* ---- Function Prototypes ---------------------------------------------- */
+
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* MINI_OPT_H */
diff --git a/drivers/net/wireless/bcm4329/include/msgtrace.h b/drivers/net/wireless/bcm4329/include/msgtrace.h
new file mode 100644
index 0000000..1479086
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/msgtrace.h
@@ -0,0 +1,72 @@
+/*
+ * Trace messages sent over HBUS
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: msgtrace.h,v 1.1.2.4 2009/01/27 04:09:40 Exp $
+ */
+
+#ifndef _MSGTRACE_H
+#define _MSGTRACE_H
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+
+/* This marks the start of a packed structure section. */
+#include <packed_section_start.h>
+
+#define MSGTRACE_VERSION 1
+
+/* Message trace header */
+typedef BWL_PRE_PACKED_STRUCT struct msgtrace_hdr {
+ uint8 version;
+ uint8 spare;
+ uint16 len; /* Len of the trace */
+ uint32 seqnum; /* Sequence number of message. Useful if the messsage has been lost
+ * because of DMA error or a bus reset (ex: SDIO Func2)
+ */
+ uint32 discarded_bytes; /* Number of discarded bytes because of trace overflow */
+ uint32 discarded_printf; /* Number of discarded printf because of trace overflow */
+} BWL_POST_PACKED_STRUCT msgtrace_hdr_t;
+
+#define MSGTRACE_HDRLEN sizeof(msgtrace_hdr_t)
+
+/* The hbus driver generates traces when sending a trace message. This causes endless traces.
+ * This flag must be set to TRUE in any hbus traces. The flag is reset in the function msgtrace_put.
+ * This prevents endless traces but generates hasardous lost of traces only in bus device code.
+ * It is recommendat to set this flag in macro SD_TRACE but not in SD_ERROR for avoiding missing
+ * hbus error traces. hbus error trace should not generates endless traces.
+ */
+extern bool msgtrace_hbus_trace;
+
+typedef void (*msgtrace_func_send_t)(void *hdl1, void *hdl2, uint8 *hdr,
+ uint16 hdrlen, uint8 *buf, uint16 buflen);
+
+extern void msgtrace_sent(void);
+extern void msgtrace_put(char *buf, int count);
+extern void msgtrace_init(void *hdl1, void *hdl2, msgtrace_func_send_t func_send);
+
+/* This marks the end of a packed structure section. */
+#include <packed_section_end.h>
+
+#endif /* _MSGTRACE_H */
diff --git a/drivers/net/wireless/bcm4329/include/osl.h b/drivers/net/wireless/bcm4329/include/osl.h
new file mode 100644
index 0000000..5599e53
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/osl.h
@@ -0,0 +1,55 @@
+/*
+ * OS Abstraction Layer
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: osl.h,v 13.37.32.1 2008/11/20 00:51:15 Exp $
+ */
+
+
+#ifndef _osl_h_
+#define _osl_h_
+
+
+typedef struct osl_info osl_t;
+typedef struct osl_dmainfo osldma_t;
+
+#define OSL_PKTTAG_SZ 32
+
+
+typedef void (*pktfree_cb_fn_t)(void *ctx, void *pkt, unsigned int status);
+
+#include <linux_osl.h>
+
+
+
+
+#define SET_REG(osh, r, mask, val) W_REG((osh), (r), ((R_REG((osh), r) & ~(mask)) | (val)))
+
+#ifndef AND_REG
+#define AND_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) & (v))
+#endif
+
+#ifndef OR_REG
+#define OR_REG(osh, r, v) W_REG(osh, (r), R_REG(osh, r) | (v))
+#endif
+
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/packed_section_end.h b/drivers/net/wireless/bcm4329/include/packed_section_end.h
new file mode 100644
index 0000000..5b61c18
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/packed_section_end.h
@@ -0,0 +1,54 @@
+/*
+ * Declare directives for structure packing. No padding will be provided
+ * between the members of packed structures, and therefore, there is no
+ * guarantee that structure members will be aligned.
+ *
+ * Declaring packed structures is compiler specific. In order to handle all
+ * cases, packed structures should be delared as:
+ *
+ * #include <packed_section_start.h>
+ *
+ * typedef BWL_PRE_PACKED_STRUCT struct foobar_t {
+ * some_struct_members;
+ * } BWL_POST_PACKED_STRUCT foobar_t;
+ *
+ * #include <packed_section_end.h>
+ *
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: packed_section_end.h,v 1.1.6.3 2008/12/10 00:27:54 Exp $
+ */
+
+
+
+
+#ifdef BWL_PACKED_SECTION
+ #undef BWL_PACKED_SECTION
+#else
+ #error "BWL_PACKED_SECTION is NOT defined!"
+#endif
+
+
+
+
+
+#undef BWL_PRE_PACKED_STRUCT
+#undef BWL_POST_PACKED_STRUCT
diff --git a/drivers/net/wireless/bcm4329/include/packed_section_start.h b/drivers/net/wireless/bcm4329/include/packed_section_start.h
new file mode 100644
index 0000000..cb93aa6
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/packed_section_start.h
@@ -0,0 +1,61 @@
+/*
+ * Declare directives for structure packing. No padding will be provided
+ * between the members of packed structures, and therefore, there is no
+ * guarantee that structure members will be aligned.
+ *
+ * Declaring packed structures is compiler specific. In order to handle all
+ * cases, packed structures should be delared as:
+ *
+ * #include <packed_section_start.h>
+ *
+ * typedef BWL_PRE_PACKED_STRUCT struct foobar_t {
+ * some_struct_members;
+ * } BWL_POST_PACKED_STRUCT foobar_t;
+ *
+ * #include <packed_section_end.h>
+ *
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: packed_section_start.h,v 1.1.6.3 2008/12/10 00:27:54 Exp $
+ */
+
+
+
+
+#ifdef BWL_PACKED_SECTION
+ #error "BWL_PACKED_SECTION is already defined!"
+#else
+ #define BWL_PACKED_SECTION
+#endif
+
+
+
+
+
+#if defined(__GNUC__)
+ #define BWL_PRE_PACKED_STRUCT
+ #define BWL_POST_PACKED_STRUCT __attribute__((packed))
+#elif defined(__CC_ARM)
+ #define BWL_PRE_PACKED_STRUCT __packed
+ #define BWL_POST_PACKED_STRUCT
+#else
+ #error "Unknown compiler!"
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/pcicfg.h b/drivers/net/wireless/bcm4329/include/pcicfg.h
new file mode 100644
index 0000000..898962c
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/pcicfg.h
@@ -0,0 +1,52 @@
+/*
+ * pcicfg.h: PCI configuration constants and structures.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: pcicfg.h,v 1.41.12.3 2008/06/26 22:49:41 Exp $
+ */
+
+
+#ifndef _h_pcicfg_
+#define _h_pcicfg_
+
+
+#define PCI_CFG_VID 0
+#define PCI_CFG_CMD 4
+#define PCI_CFG_REV 8
+#define PCI_CFG_BAR0 0x10
+#define PCI_CFG_BAR1 0x14
+#define PCI_BAR0_WIN 0x80
+#define PCI_INT_STATUS 0x90
+#define PCI_INT_MASK 0x94
+
+#define PCIE_EXTCFG_OFFSET 0x100
+#define PCI_BAR0_PCIREGS_OFFSET (6 * 1024)
+#define PCI_BAR0_PCISBR_OFFSET (4 * 1024)
+
+#define PCI_BAR0_WINSZ (16 * 1024)
+
+
+#define PCI_16KB0_PCIREGS_OFFSET (8 * 1024)
+#define PCI_16KB0_CCREGS_OFFSET (12 * 1024)
+#define PCI_16KBB0_WINSZ (16 * 1024)
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/proto/802.11.h b/drivers/net/wireless/bcm4329/include/proto/802.11.h
new file mode 100644
index 0000000..fd26317
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/802.11.h
@@ -0,0 +1,1433 @@
+/*
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * Fundamental types and constants relating to 802.11
+ *
+ * $Id: 802.11.h,v 9.219.4.1.4.5.6.11 2010/02/09 13:23:26 Exp $
+ */
+
+
+#ifndef _802_11_H_
+#define _802_11_H_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+#ifndef _NET_ETHERNET_H_
+#include <proto/ethernet.h>
+#endif
+
+#include <proto/wpa.h>
+
+
+#include <packed_section_start.h>
+
+
+#define DOT11_TU_TO_US 1024
+
+
+#define DOT11_A3_HDR_LEN 24
+#define DOT11_A4_HDR_LEN 30
+#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN
+#define DOT11_FCS_LEN 4
+#define DOT11_ICV_LEN 4
+#define DOT11_ICV_AES_LEN 8
+#define DOT11_QOS_LEN 2
+#define DOT11_HTC_LEN 4
+
+#define DOT11_KEY_INDEX_SHIFT 6
+#define DOT11_IV_LEN 4
+#define DOT11_IV_TKIP_LEN 8
+#define DOT11_IV_AES_OCB_LEN 4
+#define DOT11_IV_AES_CCM_LEN 8
+#define DOT11_IV_MAX_LEN 8
+
+
+#define DOT11_MAX_MPDU_BODY_LEN 2304
+
+#define DOT11_MAX_MPDU_LEN (DOT11_A4_HDR_LEN + \
+ DOT11_QOS_LEN + \
+ DOT11_IV_AES_CCM_LEN + \
+ DOT11_MAX_MPDU_BODY_LEN + \
+ DOT11_ICV_LEN + \
+ DOT11_FCS_LEN)
+
+#define DOT11_MAX_SSID_LEN 32
+
+
+#define DOT11_DEFAULT_RTS_LEN 2347
+#define DOT11_MAX_RTS_LEN 2347
+
+
+#define DOT11_MIN_FRAG_LEN 256
+#define DOT11_MAX_FRAG_LEN 2346
+#define DOT11_DEFAULT_FRAG_LEN 2346
+
+
+#define DOT11_MIN_BEACON_PERIOD 1
+#define DOT11_MAX_BEACON_PERIOD 0xFFFF
+
+
+#define DOT11_MIN_DTIM_PERIOD 1
+#define DOT11_MAX_DTIM_PERIOD 0xFF
+
+
+#define DOT11_LLC_SNAP_HDR_LEN 8
+#define DOT11_OUI_LEN 3
+BWL_PRE_PACKED_STRUCT struct dot11_llc_snap_header {
+ uint8 dsap;
+ uint8 ssap;
+ uint8 ctl;
+ uint8 oui[DOT11_OUI_LEN];
+ uint16 type;
+} BWL_POST_PACKED_STRUCT;
+
+
+#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)
+
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_header {
+ uint16 fc;
+ uint16 durid;
+ struct ether_addr a1;
+ struct ether_addr a2;
+ struct ether_addr a3;
+ uint16 seq;
+ struct ether_addr a4;
+} BWL_POST_PACKED_STRUCT;
+
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_rts_frame {
+ uint16 fc;
+ uint16 durid;
+ struct ether_addr ra;
+ struct ether_addr ta;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_RTS_LEN 16
+
+BWL_PRE_PACKED_STRUCT struct dot11_cts_frame {
+ uint16 fc;
+ uint16 durid;
+ struct ether_addr ra;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_CTS_LEN 10
+
+BWL_PRE_PACKED_STRUCT struct dot11_ack_frame {
+ uint16 fc;
+ uint16 durid;
+ struct ether_addr ra;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_ACK_LEN 10
+
+BWL_PRE_PACKED_STRUCT struct dot11_ps_poll_frame {
+ uint16 fc;
+ uint16 durid;
+ struct ether_addr bssid;
+ struct ether_addr ta;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_PS_POLL_LEN 16
+
+BWL_PRE_PACKED_STRUCT struct dot11_cf_end_frame {
+ uint16 fc;
+ uint16 durid;
+ struct ether_addr ra;
+ struct ether_addr bssid;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_CS_END_LEN 16
+
+BWL_PRE_PACKED_STRUCT struct dot11_action_wifi_vendor_specific {
+ uint8 category;
+ uint8 OUI[3];
+ uint8 type;
+ uint8 subtype;
+ uint8 data[1040];
+ struct dot11_action_wifi_vendor_specific* next_node;
+} BWL_POST_PACKED_STRUCT;
+
+typedef struct dot11_action_wifi_vendor_specific dot11_action_wifi_vendor_specific_t;
+
+#define DOT11_BA_CTL_POLICY_NORMAL 0x0000
+#define DOT11_BA_CTL_POLICY_NOACK 0x0001
+#define DOT11_BA_CTL_POLICY_MASK 0x0001
+
+#define DOT11_BA_CTL_MTID 0x0002
+#define DOT11_BA_CTL_COMPRESSED 0x0004
+
+#define DOT11_BA_CTL_NUMMSDU_MASK 0x0FC0
+#define DOT11_BA_CTL_NUMMSDU_SHIFT 6
+
+#define DOT11_BA_CTL_TID_MASK 0xF000
+#define DOT11_BA_CTL_TID_SHIFT 12
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_ctl_header {
+ uint16 fc;
+ uint16 durid;
+ struct ether_addr ra;
+ struct ether_addr ta;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_CTL_HDR_LEN 16
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_bar {
+ uint16 bar_control;
+ uint16 seqnum;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_BAR_LEN 4
+
+#define DOT11_BA_BITMAP_LEN 128
+#define DOT11_BA_CMP_BITMAP_LEN 8
+
+BWL_PRE_PACKED_STRUCT struct dot11_ba {
+ uint16 ba_control;
+ uint16 seqnum;
+ uint8 bitmap[DOT11_BA_BITMAP_LEN];
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_BA_LEN 4
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_management_header {
+ uint16 fc;
+ uint16 durid;
+ struct ether_addr da;
+ struct ether_addr sa;
+ struct ether_addr bssid;
+ uint16 seq;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_MGMT_HDR_LEN 24
+
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_bcn_prb {
+ uint32 timestamp[2];
+ uint16 beacon_interval;
+ uint16 capability;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_BCN_PRB_LEN 12
+
+BWL_PRE_PACKED_STRUCT struct dot11_auth {
+ uint16 alg;
+ uint16 seq;
+ uint16 status;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_AUTH_FIXED_LEN 6
+
+BWL_PRE_PACKED_STRUCT struct dot11_assoc_req {
+ uint16 capability;
+ uint16 listen;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_ASSOC_REQ_FIXED_LEN 4
+
+BWL_PRE_PACKED_STRUCT struct dot11_reassoc_req {
+ uint16 capability;
+ uint16 listen;
+ struct ether_addr ap;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_REASSOC_REQ_FIXED_LEN 10
+
+BWL_PRE_PACKED_STRUCT struct dot11_assoc_resp {
+ uint16 capability;
+ uint16 status;
+ uint16 aid;
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_ASSOC_RESP_FIXED_LEN 6
+
+BWL_PRE_PACKED_STRUCT struct dot11_action_measure {
+ uint8 category;
+ uint8 action;
+ uint8 token;
+ uint8 data[1];
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_ACTION_MEASURE_LEN 3
+
+BWL_PRE_PACKED_STRUCT struct dot11_action_ht_ch_width {
+ uint8 category;
+ uint8 action;
+ uint8 ch_width;
+} BWL_POST_PACKED_STRUCT;
+
+BWL_PRE_PACKED_STRUCT struct dot11_action_ht_mimops {
+ uint8 category;
+ uint8 action;
+ uint8 control;
+} BWL_POST_PACKED_STRUCT;
+
+#define SM_PWRSAVE_ENABLE 1
+#define SM_PWRSAVE_MODE 2
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_power_cnst {
+ uint8 id;
+ uint8 len;
+ uint8 power;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_power_cnst dot11_power_cnst_t;
+
+BWL_PRE_PACKED_STRUCT struct dot11_power_cap {
+ uint8 min;
+ uint8 max;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_power_cap dot11_power_cap_t;
+
+BWL_PRE_PACKED_STRUCT struct dot11_tpc_rep {
+ uint8 id;
+ uint8 len;
+ uint8 tx_pwr;
+ uint8 margin;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_tpc_rep dot11_tpc_rep_t;
+#define DOT11_MNG_IE_TPC_REPORT_LEN 2
+
+BWL_PRE_PACKED_STRUCT struct dot11_supp_channels {
+ uint8 id;
+ uint8 len;
+ uint8 first_channel;
+ uint8 num_channels;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_supp_channels dot11_supp_channels_t;
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_extch {
+ uint8 id;
+ uint8 len;
+ uint8 extch;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_extch dot11_extch_ie_t;
+
+BWL_PRE_PACKED_STRUCT struct dot11_brcm_extch {
+ uint8 id;
+ uint8 len;
+ uint8 oui[3];
+ uint8 type;
+ uint8 extch;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_brcm_extch dot11_brcm_extch_ie_t;
+
+#define BRCM_EXTCH_IE_LEN 5
+#define BRCM_EXTCH_IE_TYPE 53
+#define DOT11_EXTCH_IE_LEN 1
+#define DOT11_EXT_CH_MASK 0x03
+#define DOT11_EXT_CH_UPPER 0x01
+#define DOT11_EXT_CH_LOWER 0x03
+#define DOT11_EXT_CH_NONE 0x00
+
+BWL_PRE_PACKED_STRUCT struct dot11_action_frmhdr {
+ uint8 category;
+ uint8 action;
+ uint8 data[1];
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_ACTION_FRMHDR_LEN 2
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_channel_switch {
+ uint8 id;
+ uint8 len;
+ uint8 mode;
+ uint8 channel;
+ uint8 count;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_channel_switch dot11_chan_switch_ie_t;
+
+#define DOT11_SWITCH_IE_LEN 3
+
+#define DOT11_CSA_MODE_ADVISORY 0
+#define DOT11_CSA_MODE_NO_TX 1
+
+BWL_PRE_PACKED_STRUCT struct dot11_action_switch_channel {
+ uint8 category;
+ uint8 action;
+ dot11_chan_switch_ie_t chan_switch_ie;
+ dot11_brcm_extch_ie_t extch_ie;
+} BWL_POST_PACKED_STRUCT;
+
+BWL_PRE_PACKED_STRUCT struct dot11_csa_body {
+ uint8 mode;
+ uint8 reg;
+ uint8 channel;
+ uint8 count;
+} BWL_POST_PACKED_STRUCT;
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_ext_csa {
+ uint8 id;
+ uint8 len;
+ struct dot11_csa_body b;
+} BWL_POST_PACKED_STRUCT;
+
+BWL_PRE_PACKED_STRUCT struct dot11y_action_ext_csa {
+ uint8 category;
+ uint8 action;
+ struct dot11_csa_body b;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_ext_csa dot11_ext_csa_ie_t;
+#define DOT11_EXT_CSA_IE_LEN 4
+
+BWL_PRE_PACKED_STRUCT struct dot11_action_ext_csa {
+ uint8 category;
+ uint8 action;
+ dot11_ext_csa_ie_t chan_switch_ie;
+} BWL_POST_PACKED_STRUCT;
+
+BWL_PRE_PACKED_STRUCT struct dot11_obss_coex {
+ uint8 id;
+ uint8 len;
+ uint8 info;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_obss_coex dot11_obss_coex_t;
+#define DOT11_OBSS_COEXINFO_LEN 1
+
+#define DOT11_OBSS_COEX_INFO_REQ 0x01
+#define DOT11_OBSS_COEX_40MHZ_INTOLERANT 0x02
+#define DOT11_OBSS_COEX_20MHZ_WIDTH_REQ 0x04
+
+BWL_PRE_PACKED_STRUCT struct dot11_obss_chanlist {
+ uint8 id;
+ uint8 len;
+ uint8 regclass;
+ uint8 chanlist[1];
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_obss_chanlist dot11_obss_chanlist_t;
+#define DOT11_OBSS_CHANLIST_FIXED_LEN 1
+
+BWL_PRE_PACKED_STRUCT struct dot11_extcap_ie {
+ uint8 id;
+ uint8 len;
+ uint8 cap;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_extcap_ie dot11_extcap_ie_t;
+#define DOT11_EXTCAP_LEN 1
+
+
+
+#define DOT11_MEASURE_TYPE_BASIC 0
+#define DOT11_MEASURE_TYPE_CCA 1
+#define DOT11_MEASURE_TYPE_RPI 2
+
+
+#define DOT11_MEASURE_MODE_ENABLE (1<<1)
+#define DOT11_MEASURE_MODE_REQUEST (1<<2)
+#define DOT11_MEASURE_MODE_REPORT (1<<3)
+
+#define DOT11_MEASURE_MODE_LATE (1<<0)
+#define DOT11_MEASURE_MODE_INCAPABLE (1<<1)
+#define DOT11_MEASURE_MODE_REFUSED (1<<2)
+
+#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0))
+#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1))
+#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2))
+#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3))
+#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4))
+
+BWL_PRE_PACKED_STRUCT struct dot11_meas_req {
+ uint8 id;
+ uint8 len;
+ uint8 token;
+ uint8 mode;
+ uint8 type;
+ uint8 channel;
+ uint8 start_time[8];
+ uint16 duration;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_meas_req dot11_meas_req_t;
+#define DOT11_MNG_IE_MREQ_LEN 14
+
+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3
+
+BWL_PRE_PACKED_STRUCT struct dot11_meas_rep {
+ uint8 id;
+ uint8 len;
+ uint8 token;
+ uint8 mode;
+ uint8 type;
+ BWL_PRE_PACKED_STRUCT union
+ {
+ BWL_PRE_PACKED_STRUCT struct {
+ uint8 channel;
+ uint8 start_time[8];
+ uint16 duration;
+ uint8 map;
+ } BWL_POST_PACKED_STRUCT basic;
+ uint8 data[1];
+ } BWL_POST_PACKED_STRUCT rep;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_meas_rep dot11_meas_rep_t;
+
+
+#define DOT11_MNG_IE_MREP_FIXED_LEN 3
+
+BWL_PRE_PACKED_STRUCT struct dot11_meas_rep_basic {
+ uint8 channel;
+ uint8 start_time[8];
+ uint16 duration;
+ uint8 map;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
+#define DOT11_MEASURE_BASIC_REP_LEN 12
+
+BWL_PRE_PACKED_STRUCT struct dot11_quiet {
+ uint8 id;
+ uint8 len;
+ uint8 count;
+ uint8 period;
+ uint16 duration;
+ uint16 offset;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_quiet dot11_quiet_t;
+
+BWL_PRE_PACKED_STRUCT struct chan_map_tuple {
+ uint8 channel;
+ uint8 map;
+} BWL_POST_PACKED_STRUCT;
+typedef struct chan_map_tuple chan_map_tuple_t;
+
+BWL_PRE_PACKED_STRUCT struct dot11_ibss_dfs {
+ uint8 id;
+ uint8 len;
+ uint8 eaddr[ETHER_ADDR_LEN];
+ uint8 interval;
+ chan_map_tuple_t map[1];
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_ibss_dfs dot11_ibss_dfs_t;
+
+
+#define WME_OUI "\x00\x50\xf2"
+#define WME_VER 1
+#define WME_TYPE 2
+#define WME_SUBTYPE_IE 0
+#define WME_SUBTYPE_PARAM_IE 1
+#define WME_SUBTYPE_TSPEC 2
+
+
+#define AC_BE 0
+#define AC_BK 1
+#define AC_VI 2
+#define AC_VO 3
+#define AC_COUNT 4
+
+typedef uint8 ac_bitmap_t;
+
+#define AC_BITMAP_NONE 0x0
+#define AC_BITMAP_ALL 0xf
+#define AC_BITMAP_TST(ab, ac) (((ab) & (1 << (ac))) != 0)
+#define AC_BITMAP_SET(ab, ac) (((ab) |= (1 << (ac))))
+#define AC_BITMAP_RESET(ab, ac) (((ab) &= ~(1 << (ac))))
+
+
+BWL_PRE_PACKED_STRUCT struct wme_ie {
+ uint8 oui[3];
+ uint8 type;
+ uint8 subtype;
+ uint8 version;
+ uint8 qosinfo;
+} BWL_POST_PACKED_STRUCT;
+typedef struct wme_ie wme_ie_t;
+#define WME_IE_LEN 7
+
+BWL_PRE_PACKED_STRUCT struct edcf_acparam {
+ uint8 ACI;
+ uint8 ECW;
+ uint16 TXOP;
+} BWL_POST_PACKED_STRUCT;
+typedef struct edcf_acparam edcf_acparam_t;
+
+
+BWL_PRE_PACKED_STRUCT struct wme_param_ie {
+ uint8 oui[3];
+ uint8 type;
+ uint8 subtype;
+ uint8 version;
+ uint8 qosinfo;
+ uint8 rsvd;
+ edcf_acparam_t acparam[AC_COUNT];
+} BWL_POST_PACKED_STRUCT;
+typedef struct wme_param_ie wme_param_ie_t;
+#define WME_PARAM_IE_LEN 24
+
+
+#define WME_QI_AP_APSD_MASK 0x80
+#define WME_QI_AP_APSD_SHIFT 7
+#define WME_QI_AP_COUNT_MASK 0x0f
+#define WME_QI_AP_COUNT_SHIFT 0
+
+
+#define WME_QI_STA_MAXSPLEN_MASK 0x60
+#define WME_QI_STA_MAXSPLEN_SHIFT 5
+#define WME_QI_STA_APSD_ALL_MASK 0xf
+#define WME_QI_STA_APSD_ALL_SHIFT 0
+#define WME_QI_STA_APSD_BE_MASK 0x8
+#define WME_QI_STA_APSD_BE_SHIFT 3
+#define WME_QI_STA_APSD_BK_MASK 0x4
+#define WME_QI_STA_APSD_BK_SHIFT 2
+#define WME_QI_STA_APSD_VI_MASK 0x2
+#define WME_QI_STA_APSD_VI_SHIFT 1
+#define WME_QI_STA_APSD_VO_MASK 0x1
+#define WME_QI_STA_APSD_VO_SHIFT 0
+
+
+#define EDCF_AIFSN_MIN 1
+#define EDCF_AIFSN_MAX 15
+#define EDCF_AIFSN_MASK 0x0f
+#define EDCF_ACM_MASK 0x10
+#define EDCF_ACI_MASK 0x60
+#define EDCF_ACI_SHIFT 5
+#define EDCF_AIFSN_SHIFT 12
+
+
+#define EDCF_ECW_MIN 0
+#define EDCF_ECW_MAX 15
+#define EDCF_ECW2CW(exp) ((1 << (exp)) - 1)
+#define EDCF_ECWMIN_MASK 0x0f
+#define EDCF_ECWMAX_MASK 0xf0
+#define EDCF_ECWMAX_SHIFT 4
+
+
+#define EDCF_TXOP_MIN 0
+#define EDCF_TXOP_MAX 65535
+#define EDCF_TXOP2USEC(txop) ((txop) << 5)
+
+
+#define NON_EDCF_AC_BE_ACI_STA 0x02
+
+
+#define EDCF_AC_BE_ACI_STA 0x03
+#define EDCF_AC_BE_ECW_STA 0xA4
+#define EDCF_AC_BE_TXOP_STA 0x0000
+#define EDCF_AC_BK_ACI_STA 0x27
+#define EDCF_AC_BK_ECW_STA 0xA4
+#define EDCF_AC_BK_TXOP_STA 0x0000
+#define EDCF_AC_VI_ACI_STA 0x42
+#define EDCF_AC_VI_ECW_STA 0x43
+#define EDCF_AC_VI_TXOP_STA 0x005e
+#define EDCF_AC_VO_ACI_STA 0x62
+#define EDCF_AC_VO_ECW_STA 0x32
+#define EDCF_AC_VO_TXOP_STA 0x002f
+
+
+#define EDCF_AC_BE_ACI_AP 0x03
+#define EDCF_AC_BE_ECW_AP 0x64
+#define EDCF_AC_BE_TXOP_AP 0x0000
+#define EDCF_AC_BK_ACI_AP 0x27
+#define EDCF_AC_BK_ECW_AP 0xA4
+#define EDCF_AC_BK_TXOP_AP 0x0000
+#define EDCF_AC_VI_ACI_AP 0x41
+#define EDCF_AC_VI_ECW_AP 0x43
+#define EDCF_AC_VI_TXOP_AP 0x005e
+#define EDCF_AC_VO_ACI_AP 0x61
+#define EDCF_AC_VO_ECW_AP 0x32
+#define EDCF_AC_VO_TXOP_AP 0x002f
+
+
+BWL_PRE_PACKED_STRUCT struct edca_param_ie {
+ uint8 qosinfo;
+ uint8 rsvd;
+ edcf_acparam_t acparam[AC_COUNT];
+} BWL_POST_PACKED_STRUCT;
+typedef struct edca_param_ie edca_param_ie_t;
+#define EDCA_PARAM_IE_LEN 18
+
+
+BWL_PRE_PACKED_STRUCT struct qos_cap_ie {
+ uint8 qosinfo;
+} BWL_POST_PACKED_STRUCT;
+typedef struct qos_cap_ie qos_cap_ie_t;
+
+BWL_PRE_PACKED_STRUCT struct dot11_qbss_load_ie {
+ uint8 id;
+ uint8 length;
+ uint16 station_count;
+ uint8 channel_utilization;
+ uint16 aac;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_qbss_load_ie dot11_qbss_load_ie_t;
+
+
+#define FIXED_MSDU_SIZE 0x8000
+#define MSDU_SIZE_MASK 0x7fff
+
+
+
+#define INTEGER_SHIFT 13
+#define FRACTION_MASK 0x1FFF
+
+
+BWL_PRE_PACKED_STRUCT struct dot11_management_notification {
+ uint8 category;
+ uint8 action;
+ uint8 token;
+ uint8 status;
+ uint8 data[1];
+} BWL_POST_PACKED_STRUCT;
+#define DOT11_MGMT_NOTIFICATION_LEN 4
+
+
+#define WME_ADDTS_REQUEST 0
+#define WME_ADDTS_RESPONSE 1
+#define WME_DELTS_REQUEST 2
+
+
+#define WME_ADMISSION_ACCEPTED 0
+#define WME_INVALID_PARAMETERS 1
+#define WME_ADMISSION_REFUSED 3
+
+
+#define BCN_PRB_SSID(body) ((char*)(body) + DOT11_BCN_PRB_LEN)
+
+
+#define DOT11_OPEN_SYSTEM 0
+#define DOT11_SHARED_KEY 1
+
+#define DOT11_OPEN_SHARED 2
+#define DOT11_CHALLENGE_LEN 128
+
+
+#define FC_PVER_MASK 0x3
+#define FC_PVER_SHIFT 0
+#define FC_TYPE_MASK 0xC
+#define FC_TYPE_SHIFT 2
+#define FC_SUBTYPE_MASK 0xF0
+#define FC_SUBTYPE_SHIFT 4
+#define FC_TODS 0x100
+#define FC_TODS_SHIFT 8
+#define FC_FROMDS 0x200
+#define FC_FROMDS_SHIFT 9
+#define FC_MOREFRAG 0x400
+#define FC_MOREFRAG_SHIFT 10
+#define FC_RETRY 0x800
+#define FC_RETRY_SHIFT 11
+#define FC_PM 0x1000
+#define FC_PM_SHIFT 12
+#define FC_MOREDATA 0x2000
+#define FC_MOREDATA_SHIFT 13
+#define FC_WEP 0x4000
+#define FC_WEP_SHIFT 14
+#define FC_ORDER 0x8000
+#define FC_ORDER_SHIFT 15
+
+
+#define SEQNUM_SHIFT 4
+#define SEQNUM_MAX 0x1000
+#define FRAGNUM_MASK 0xF
+
+
+
+
+#define FC_TYPE_MNG 0
+#define FC_TYPE_CTL 1
+#define FC_TYPE_DATA 2
+
+
+#define FC_SUBTYPE_ASSOC_REQ 0
+#define FC_SUBTYPE_ASSOC_RESP 1
+#define FC_SUBTYPE_REASSOC_REQ 2
+#define FC_SUBTYPE_REASSOC_RESP 3
+#define FC_SUBTYPE_PROBE_REQ 4
+#define FC_SUBTYPE_PROBE_RESP 5
+#define FC_SUBTYPE_BEACON 8
+#define FC_SUBTYPE_ATIM 9
+#define FC_SUBTYPE_DISASSOC 10
+#define FC_SUBTYPE_AUTH 11
+#define FC_SUBTYPE_DEAUTH 12
+#define FC_SUBTYPE_ACTION 13
+#define FC_SUBTYPE_ACTION_NOACK 14
+
+
+#define FC_SUBTYPE_CTL_WRAPPER 7
+#define FC_SUBTYPE_BLOCKACK_REQ 8
+#define FC_SUBTYPE_BLOCKACK 9
+#define FC_SUBTYPE_PS_POLL 10
+#define FC_SUBTYPE_RTS 11
+#define FC_SUBTYPE_CTS 12
+#define FC_SUBTYPE_ACK 13
+#define FC_SUBTYPE_CF_END 14
+#define FC_SUBTYPE_CF_END_ACK 15
+
+
+#define FC_SUBTYPE_DATA 0
+#define FC_SUBTYPE_DATA_CF_ACK 1
+#define FC_SUBTYPE_DATA_CF_POLL 2
+#define FC_SUBTYPE_DATA_CF_ACK_POLL 3
+#define FC_SUBTYPE_NULL 4
+#define FC_SUBTYPE_CF_ACK 5
+#define FC_SUBTYPE_CF_POLL 6
+#define FC_SUBTYPE_CF_ACK_POLL 7
+#define FC_SUBTYPE_QOS_DATA 8
+#define FC_SUBTYPE_QOS_DATA_CF_ACK 9
+#define FC_SUBTYPE_QOS_DATA_CF_POLL 10
+#define FC_SUBTYPE_QOS_DATA_CF_ACK_POLL 11
+#define FC_SUBTYPE_QOS_NULL 12
+#define FC_SUBTYPE_QOS_CF_POLL 14
+#define FC_SUBTYPE_QOS_CF_ACK_POLL 15
+
+
+#define FC_SUBTYPE_ANY_QOS(s) (((s) & 8) != 0)
+#define FC_SUBTYPE_ANY_NULL(s) (((s) & 4) != 0)
+#define FC_SUBTYPE_ANY_CF_POLL(s) (((s) & 2) != 0)
+#define FC_SUBTYPE_ANY_CF_ACK(s) (((s) & 1) != 0)
+
+
+#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK)
+
+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
+
+#define FC_SUBTYPE(fc) (((fc) & FC_SUBTYPE_MASK) >> FC_SUBTYPE_SHIFT)
+#define FC_TYPE(fc) (((fc) & FC_TYPE_MASK) >> FC_TYPE_SHIFT)
+
+#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)
+#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)
+#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)
+#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)
+#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
+#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
+#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)
+#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)
+#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)
+#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)
+#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)
+#define FC_ACTION_NOACK FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION_NOACK)
+
+#define FC_CTL_WRAPPER FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTL_WRAPPER)
+#define FC_BLOCKACK_REQ FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK_REQ)
+#define FC_BLOCKACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_BLOCKACK)
+#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)
+#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)
+#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)
+#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)
+#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)
+#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)
+
+#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)
+#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)
+#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)
+#define FC_QOS_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA)
+#define FC_QOS_NULL FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL)
+
+
+
+
+#define QOS_PRIO_SHIFT 0
+#define QOS_PRIO_MASK 0x0007
+#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT)
+
+
+#define QOS_TID_SHIFT 0
+#define QOS_TID_MASK 0x000f
+#define QOS_TID(qos) (((qos) & QOS_TID_MASK) >> QOS_TID_SHIFT)
+
+
+#define QOS_EOSP_SHIFT 4
+#define QOS_EOSP_MASK 0x0010
+#define QOS_EOSP(qos) (((qos) & QOS_EOSP_MASK) >> QOS_EOSP_SHIFT)
+
+
+#define QOS_ACK_NORMAL_ACK 0
+#define QOS_ACK_NO_ACK 1
+#define QOS_ACK_NO_EXP_ACK 2
+#define QOS_ACK_BLOCK_ACK 3
+#define QOS_ACK_SHIFT 5
+#define QOS_ACK_MASK 0x0060
+#define QOS_ACK(qos) (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT)
+
+
+#define QOS_AMSDU_SHIFT 7
+#define QOS_AMSDU_MASK 0x0080
+
+
+
+
+
+
+#define DOT11_MNG_AUTH_ALGO_LEN 2
+#define DOT11_MNG_AUTH_SEQ_LEN 2
+#define DOT11_MNG_BEACON_INT_LEN 2
+#define DOT11_MNG_CAP_LEN 2
+#define DOT11_MNG_AP_ADDR_LEN 6
+#define DOT11_MNG_LISTEN_INT_LEN 2
+#define DOT11_MNG_REASON_LEN 2
+#define DOT11_MNG_AID_LEN 2
+#define DOT11_MNG_STATUS_LEN 2
+#define DOT11_MNG_TIMESTAMP_LEN 8
+
+
+#define DOT11_AID_MASK 0x3fff
+
+
+#define DOT11_RC_RESERVED 0
+#define DOT11_RC_UNSPECIFIED 1
+#define DOT11_RC_AUTH_INVAL 2
+#define DOT11_RC_DEAUTH_LEAVING 3
+#define DOT11_RC_INACTIVITY 4
+#define DOT11_RC_BUSY 5
+#define DOT11_RC_INVAL_CLASS_2 6
+#define DOT11_RC_INVAL_CLASS_3 7
+#define DOT11_RC_DISASSOC_LEAVING 8
+#define DOT11_RC_NOT_AUTH 9
+#define DOT11_RC_BAD_PC 10
+#define DOT11_RC_BAD_CHANNELS 11
+
+
+
+#define DOT11_RC_UNSPECIFIED_QOS 32
+#define DOT11_RC_INSUFFCIENT_BW 33
+#define DOT11_RC_EXCESSIVE_FRAMES 34
+#define DOT11_RC_TX_OUTSIDE_TXOP 35
+#define DOT11_RC_LEAVING_QBSS 36
+#define DOT11_RC_BAD_MECHANISM 37
+#define DOT11_RC_SETUP_NEEDED 38
+#define DOT11_RC_TIMEOUT 39
+
+#define DOT11_RC_MAX 23
+
+
+#define DOT11_SC_SUCCESS 0
+#define DOT11_SC_FAILURE 1
+#define DOT11_SC_CAP_MISMATCH 10
+#define DOT11_SC_REASSOC_FAIL 11
+#define DOT11_SC_ASSOC_FAIL 12
+#define DOT11_SC_AUTH_MISMATCH 13
+#define DOT11_SC_AUTH_SEQ 14
+#define DOT11_SC_AUTH_CHALLENGE_FAIL 15
+#define DOT11_SC_AUTH_TIMEOUT 16
+#define DOT11_SC_ASSOC_BUSY_FAIL 17
+#define DOT11_SC_ASSOC_RATE_MISMATCH 18
+#define DOT11_SC_ASSOC_SHORT_REQUIRED 19
+#define DOT11_SC_ASSOC_PBCC_REQUIRED 20
+#define DOT11_SC_ASSOC_AGILITY_REQUIRED 21
+#define DOT11_SC_ASSOC_SPECTRUM_REQUIRED 22
+#define DOT11_SC_ASSOC_BAD_POWER_CAP 23
+#define DOT11_SC_ASSOC_BAD_SUP_CHANNELS 24
+#define DOT11_SC_ASSOC_SHORTSLOT_REQUIRED 25
+#define DOT11_SC_ASSOC_ERPBCC_REQUIRED 26
+#define DOT11_SC_ASSOC_DSSOFDM_REQUIRED 27
+
+#define DOT11_SC_DECLINED 37
+#define DOT11_SC_INVALID_PARAMS 38
+
+
+#define DOT11_MNG_DS_PARAM_LEN 1
+#define DOT11_MNG_IBSS_PARAM_LEN 2
+
+
+#define DOT11_MNG_TIM_FIXED_LEN 3
+#define DOT11_MNG_TIM_DTIM_COUNT 0
+#define DOT11_MNG_TIM_DTIM_PERIOD 1
+#define DOT11_MNG_TIM_BITMAP_CTL 2
+#define DOT11_MNG_TIM_PVB 3
+
+
+#define TLV_TAG_OFF 0
+#define TLV_LEN_OFF 1
+#define TLV_HDR_LEN 2
+#define TLV_BODY_OFF 2
+
+
+#define DOT11_MNG_SSID_ID 0
+#define DOT11_MNG_RATES_ID 1
+#define DOT11_MNG_FH_PARMS_ID 2
+#define DOT11_MNG_DS_PARMS_ID 3
+#define DOT11_MNG_CF_PARMS_ID 4
+#define DOT11_MNG_TIM_ID 5
+#define DOT11_MNG_IBSS_PARMS_ID 6
+#define DOT11_MNG_COUNTRY_ID 7
+#define DOT11_MNG_HOPPING_PARMS_ID 8
+#define DOT11_MNG_HOPPING_TABLE_ID 9
+#define DOT11_MNG_REQUEST_ID 10
+#define DOT11_MNG_QBSS_LOAD_ID 11
+#define DOT11_MNG_EDCA_PARAM_ID 12
+#define DOT11_MNG_CHALLENGE_ID 16
+#define DOT11_MNG_PWR_CONSTRAINT_ID 32
+#define DOT11_MNG_PWR_CAP_ID 33
+#define DOT11_MNG_TPC_REQUEST_ID 34
+#define DOT11_MNG_TPC_REPORT_ID 35
+#define DOT11_MNG_SUPP_CHANNELS_ID 36
+#define DOT11_MNG_CHANNEL_SWITCH_ID 37
+#define DOT11_MNG_MEASURE_REQUEST_ID 38
+#define DOT11_MNG_MEASURE_REPORT_ID 39
+#define DOT11_MNG_QUIET_ID 40
+#define DOT11_MNG_IBSS_DFS_ID 41
+#define DOT11_MNG_ERP_ID 42
+#define DOT11_MNG_TS_DELAY_ID 43
+#define DOT11_MNG_HT_CAP 45
+#define DOT11_MNG_QOS_CAP_ID 46
+#define DOT11_MNG_NONERP_ID 47
+#define DOT11_MNG_RSN_ID 48
+#define DOT11_MNG_EXT_RATES_ID 50
+#define DOT11_MNG_REGCLASS_ID 59
+#define DOT11_MNG_EXT_CSA_ID 60
+#define DOT11_MNG_HT_ADD 61
+#define DOT11_MNG_EXT_CHANNEL_OFFSET 62
+#define DOT11_MNG_WAPI_ID 68
+#define DOT11_MNG_HT_BSS_COEXINFO_ID 72
+#define DOT11_MNG_HT_BSS_CHANNEL_REPORT_ID 73
+#define DOT11_MNG_HT_OBSS_ID 74
+#define DOT11_MNG_EXT_CAP 127
+#define DOT11_MNG_WPA_ID 221
+#define DOT11_MNG_PROPR_ID 221
+
+
+#define DOT11_RATE_BASIC 0x80
+#define DOT11_RATE_MASK 0x7F
+
+
+#define DOT11_MNG_ERP_LEN 1
+#define DOT11_MNG_NONERP_PRESENT 0x01
+#define DOT11_MNG_USE_PROTECTION 0x02
+#define DOT11_MNG_BARKER_PREAMBLE 0x04
+
+#define DOT11_MGN_TS_DELAY_LEN 4
+#define TS_DELAY_FIELD_SIZE 4
+
+
+#define DOT11_CAP_ESS 0x0001
+#define DOT11_CAP_IBSS 0x0002
+#define DOT11_CAP_POLLABLE 0x0004
+#define DOT11_CAP_POLL_RQ 0x0008
+#define DOT11_CAP_PRIVACY 0x0010
+#define DOT11_CAP_SHORT 0x0020
+#define DOT11_CAP_PBCC 0x0040
+#define DOT11_CAP_AGILITY 0x0080
+#define DOT11_CAP_SPECTRUM 0x0100
+#define DOT11_CAP_SHORTSLOT 0x0400
+#define DOT11_CAP_CCK_OFDM 0x2000
+
+
+#define DOT11_OBSS_COEX_MNG_SUPPORT 0x01
+
+
+#define DOT11_ACTION_HDR_LEN 2
+#define DOT11_ACTION_CAT_ERR_MASK 0x80
+#define DOT11_ACTION_CAT_MASK 0x7F
+#define DOT11_ACTION_CAT_SPECT_MNG 0
+#define DOT11_ACTION_CAT_BLOCKACK 3
+#define DOT11_ACTION_CAT_PUBLIC 4
+#define DOT11_ACTION_CAT_HT 7
+#define DOT11_ACTION_CAT_VS 127
+#define DOT11_ACTION_NOTIFICATION 0x11
+
+#define DOT11_ACTION_ID_M_REQ 0
+#define DOT11_ACTION_ID_M_REP 1
+#define DOT11_ACTION_ID_TPC_REQ 2
+#define DOT11_ACTION_ID_TPC_REP 3
+#define DOT11_ACTION_ID_CHANNEL_SWITCH 4
+#define DOT11_ACTION_ID_EXT_CSA 5
+
+
+#define DOT11_ACTION_ID_HT_CH_WIDTH 0
+#define DOT11_ACTION_ID_HT_MIMO_PS 1
+
+
+#define DOT11_PUB_ACTION_BSS_COEX_MNG 0
+#define DOT11_PUB_ACTION_CHANNEL_SWITCH 4
+
+
+#define DOT11_BA_ACTION_ADDBA_REQ 0
+#define DOT11_BA_ACTION_ADDBA_RESP 1
+#define DOT11_BA_ACTION_DELBA 2
+
+
+#define DOT11_ADDBA_PARAM_AMSDU_SUP 0x0001
+#define DOT11_ADDBA_PARAM_POLICY_MASK 0x0002
+#define DOT11_ADDBA_PARAM_POLICY_SHIFT 1
+#define DOT11_ADDBA_PARAM_TID_MASK 0x003c
+#define DOT11_ADDBA_PARAM_TID_SHIFT 2
+#define DOT11_ADDBA_PARAM_BSIZE_MASK 0xffc0
+#define DOT11_ADDBA_PARAM_BSIZE_SHIFT 6
+
+#define DOT11_ADDBA_POLICY_DELAYED 0
+#define DOT11_ADDBA_POLICY_IMMEDIATE 1
+
+BWL_PRE_PACKED_STRUCT struct dot11_addba_req {
+ uint8 category;
+ uint8 action;
+ uint8 token;
+ uint16 addba_param_set;
+ uint16 timeout;
+ uint16 start_seqnum;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_addba_req dot11_addba_req_t;
+#define DOT11_ADDBA_REQ_LEN 9
+
+BWL_PRE_PACKED_STRUCT struct dot11_addba_resp {
+ uint8 category;
+ uint8 action;
+ uint8 token;
+ uint16 status;
+ uint16 addba_param_set;
+ uint16 timeout;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_addba_resp dot11_addba_resp_t;
+#define DOT11_ADDBA_RESP_LEN 9
+
+
+#define DOT11_DELBA_PARAM_INIT_MASK 0x0800
+#define DOT11_DELBA_PARAM_INIT_SHIFT 11
+#define DOT11_DELBA_PARAM_TID_MASK 0xf000
+#define DOT11_DELBA_PARAM_TID_SHIFT 12
+
+BWL_PRE_PACKED_STRUCT struct dot11_delba {
+ uint8 category;
+ uint8 action;
+ uint16 delba_param_set;
+ uint16 reason;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_delba dot11_delba_t;
+#define DOT11_DELBA_LEN 6
+
+
+#define DOT11_BSSTYPE_INFRASTRUCTURE 0
+#define DOT11_BSSTYPE_INDEPENDENT 1
+#define DOT11_BSSTYPE_ANY 2
+#define DOT11_SCANTYPE_ACTIVE 0
+#define DOT11_SCANTYPE_PASSIVE 1
+
+
+#define PREN_PREAMBLE 24
+#define PREN_MM_EXT 8
+#define PREN_PREAMBLE_EXT 4
+
+
+#define NPHY_RIFS_TIME 2
+
+
+#define APHY_SLOT_TIME 9
+#define APHY_SIFS_TIME 16
+#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))
+#define APHY_PREAMBLE_TIME 16
+#define APHY_SIGNAL_TIME 4
+#define APHY_SYMBOL_TIME 4
+#define APHY_SERVICE_NBITS 16
+#define APHY_TAIL_NBITS 6
+#define APHY_CWMIN 15
+
+
+#define BPHY_SLOT_TIME 20
+#define BPHY_SIFS_TIME 10
+#define BPHY_DIFS_TIME 50
+#define BPHY_PLCP_TIME 192
+#define BPHY_PLCP_SHORT_TIME 96
+#define BPHY_CWMIN 31
+
+
+#define DOT11_OFDM_SIGNAL_EXTENSION 6
+
+#define PHY_CWMAX 1023
+
+#define DOT11_MAXNUMFRAGS 16
+
+
+typedef struct d11cnt {
+ uint32 txfrag;
+ uint32 txmulti;
+ uint32 txfail;
+ uint32 txretry;
+ uint32 txretrie;
+ uint32 rxdup;
+ uint32 txrts;
+ uint32 txnocts;
+ uint32 txnoack;
+ uint32 rxfrag;
+ uint32 rxmulti;
+ uint32 rxcrc;
+ uint32 txfrmsnt;
+ uint32 rxundec;
+} d11cnt_t;
+
+
+#define BRCM_PROP_OUI "\x00\x90\x4C"
+
+
+
+
+BWL_PRE_PACKED_STRUCT struct brcm_prop_ie_s {
+ uint8 id;
+ uint8 len;
+ uint8 oui[3];
+ uint8 type;
+ uint16 cap;
+} BWL_POST_PACKED_STRUCT;
+typedef struct brcm_prop_ie_s brcm_prop_ie_t;
+
+#define BRCM_PROP_IE_LEN 6
+
+#define DPT_IE_TYPE 2
+
+
+#define BRCM_OUI "\x00\x10\x18"
+
+
+BWL_PRE_PACKED_STRUCT struct brcm_ie {
+ uint8 id;
+ uint8 len;
+ uint8 oui[3];
+ uint8 ver;
+ uint8 assoc;
+ uint8 flags;
+ uint8 flags1;
+ uint16 amsdu_mtu_pref;
+} BWL_POST_PACKED_STRUCT;
+typedef struct brcm_ie brcm_ie_t;
+#define BRCM_IE_LEN 11
+#define BRCM_IE_VER 2
+#define BRCM_IE_LEGACY_AES_VER 1
+
+
+#ifdef WLAFTERBURNER
+#define BRF_ABCAP 0x1
+#define BRF_ABRQRD 0x2
+#define BRF_ABCOUNTER_MASK 0xf0
+#define BRF_ABCOUNTER_SHIFT 4
+#endif
+#define BRF_LZWDS 0x4
+#define BRF_BLOCKACK 0x8
+
+
+#define BRF1_AMSDU 0x1
+#define BRF1_WMEPS 0x4
+#define BRF1_PSOFIX 0x8
+
+#ifdef WLAFTERBURNER
+#define AB_WDS_TIMEOUT_MAX 15
+#define AB_WDS_TIMEOUT_MIN 1
+#endif
+
+#define AB_GUARDCOUNT 10
+
+#define MCSSET_LEN 16
+#define MAX_MCS_NUM (128)
+
+BWL_PRE_PACKED_STRUCT struct ht_cap_ie {
+ uint16 cap;
+ uint8 params;
+ uint8 supp_mcs[MCSSET_LEN];
+ uint16 ext_htcap;
+ uint32 txbf_cap;
+ uint8 as_cap;
+} BWL_POST_PACKED_STRUCT;
+typedef struct ht_cap_ie ht_cap_ie_t;
+
+
+
+BWL_PRE_PACKED_STRUCT struct ht_prop_cap_ie {
+ uint8 id;
+ uint8 len;
+ uint8 oui[3];
+ uint8 type;
+ ht_cap_ie_t cap_ie;
+} BWL_POST_PACKED_STRUCT;
+typedef struct ht_prop_cap_ie ht_prop_cap_ie_t;
+#define HT_PROP_IE_OVERHEAD 4
+#define HT_CAP_IE_LEN 26
+#define HT_CAP_IE_TYPE 51
+
+#define HT_CAP_LDPC_CODING 0x0001
+#define HT_CAP_40MHZ 0x0002
+#define HT_CAP_MIMO_PS_MASK 0x000C
+#define HT_CAP_MIMO_PS_SHIFT 0x0002
+#define HT_CAP_MIMO_PS_OFF 0x0003
+#define HT_CAP_MIMO_PS_RTS 0x0001
+#define HT_CAP_MIMO_PS_ON 0x0000
+#define HT_CAP_GF 0x0010
+#define HT_CAP_SHORT_GI_20 0x0020
+#define HT_CAP_SHORT_GI_40 0x0040
+#define HT_CAP_TX_STBC 0x0080
+#define HT_CAP_RX_STBC_MASK 0x0300
+#define HT_CAP_RX_STBC_SHIFT 8
+#define HT_CAP_DELAYED_BA 0x0400
+#define HT_CAP_MAX_AMSDU 0x0800
+#define HT_CAP_DSSS_CCK 0x1000
+#define HT_CAP_PSMP 0x2000
+#define HT_CAP_40MHZ_INTOLERANT 0x4000
+#define HT_CAP_LSIG_TXOP 0x8000
+
+#define HT_CAP_RX_STBC_NO 0x0
+#define HT_CAP_RX_STBC_ONE_STREAM 0x1
+#define HT_CAP_RX_STBC_TWO_STREAM 0x2
+#define HT_CAP_RX_STBC_THREE_STREAM 0x3
+
+#define HT_MAX_AMSDU 7935
+#define HT_MIN_AMSDU 3835
+
+#define HT_PARAMS_RX_FACTOR_MASK 0x03
+#define HT_PARAMS_DENSITY_MASK 0x1C
+#define HT_PARAMS_DENSITY_SHIFT 2
+
+
+#define AMPDU_MAX_MPDU_DENSITY 7
+#define AMPDU_RX_FACTOR_64K 3
+#define AMPDU_RX_FACTOR_BASE 8*1024
+#define AMPDU_DELIMITER_LEN 4
+
+#define HT_CAP_EXT_PCO 0x0001
+#define HT_CAP_EXT_PCO_TTIME_MASK 0x0006
+#define HT_CAP_EXT_PCO_TTIME_SHIFT 1
+#define HT_CAP_EXT_MCS_FEEDBACK_MASK 0x0300
+#define HT_CAP_EXT_MCS_FEEDBACK_SHIFT 8
+#define HT_CAP_EXT_HTC 0x0400
+#define HT_CAP_EXT_RD_RESP 0x0800
+
+BWL_PRE_PACKED_STRUCT struct ht_add_ie {
+ uint8 ctl_ch;
+ uint8 byte1;
+ uint16 opmode;
+ uint16 misc_bits;
+ uint8 basic_mcs[MCSSET_LEN];
+} BWL_POST_PACKED_STRUCT;
+typedef struct ht_add_ie ht_add_ie_t;
+
+
+
+BWL_PRE_PACKED_STRUCT struct ht_prop_add_ie {
+ uint8 id;
+ uint8 len;
+ uint8 oui[3];
+ uint8 type;
+ ht_add_ie_t add_ie;
+} BWL_POST_PACKED_STRUCT;
+typedef struct ht_prop_add_ie ht_prop_add_ie_t;
+
+#define HT_ADD_IE_LEN 22
+#define HT_ADD_IE_TYPE 52
+
+
+#define HT_BW_ANY 0x04
+#define HT_RIFS_PERMITTED 0x08
+
+
+#define HT_OPMODE_MASK 0x0003
+#define HT_OPMODE_SHIFT 0
+#define HT_OPMODE_PURE 0x0000
+#define HT_OPMODE_OPTIONAL 0x0001
+#define HT_OPMODE_HT20IN40 0x0002
+#define HT_OPMODE_MIXED 0x0003
+#define HT_OPMODE_NONGF 0x0004
+#define DOT11N_TXBURST 0x0008
+#define DOT11N_OBSS_NONHT 0x0010
+
+
+#define HT_BASIC_STBC_MCS 0x007f
+#define HT_DUAL_STBC_PROT 0x0080
+#define HT_SECOND_BCN 0x0100
+#define HT_LSIG_TXOP 0x0200
+#define HT_PCO_ACTIVE 0x0400
+#define HT_PCO_PHASE 0x0800
+#define HT_DUALCTS_PROTECTION 0x0080
+
+
+#define DOT11N_2G_TXBURST_LIMIT 6160
+#define DOT11N_5G_TXBURST_LIMIT 3080
+
+
+#define GET_HT_OPMODE(add_ie) ((ltoh16_ua(&add_ie->opmode) & HT_OPMODE_MASK) \
+ >> HT_OPMODE_SHIFT)
+#define HT_MIXEDMODE_PRESENT(add_ie) ((ltoh16_ua(&add_ie->opmode) & HT_OPMODE_MASK) \
+ == HT_OPMODE_MIXED)
+#define HT_HT20_PRESENT(add_ie) ((ltoh16_ua(&add_ie->opmode) & HT_OPMODE_MASK) \
+ == HT_OPMODE_HT20IN40)
+#define HT_OPTIONAL_PRESENT(add_ie) ((ltoh16_ua(&add_ie->opmode) & HT_OPMODE_MASK) \
+ == HT_OPMODE_OPTIONAL)
+#define HT_USE_PROTECTION(add_ie) (HT_HT20_PRESENT((add_ie)) || \
+ HT_MIXEDMODE_PRESENT((add_ie)))
+#define HT_NONGF_PRESENT(add_ie) ((ltoh16_ua(&add_ie->opmode) & HT_OPMODE_NONGF) \
+ == HT_OPMODE_NONGF)
+#define DOT11N_TXBURST_PRESENT(add_ie) ((ltoh16_ua(&add_ie->opmode) & DOT11N_TXBURST) \
+ == DOT11N_TXBURST)
+#define DOT11N_OBSS_NONHT_PRESENT(add_ie) ((ltoh16_ua(&add_ie->opmode) & DOT11N_OBSS_NONHT) \
+ == DOT11N_OBSS_NONHT)
+
+BWL_PRE_PACKED_STRUCT struct obss_params {
+ uint16 passive_dwell;
+ uint16 active_dwell;
+ uint16 bss_widthscan_interval;
+ uint16 passive_total;
+ uint16 active_total;
+ uint16 chanwidth_transition_dly;
+ uint16 activity_threshold;
+} BWL_POST_PACKED_STRUCT;
+typedef struct obss_params obss_params_t;
+
+BWL_PRE_PACKED_STRUCT struct dot11_obss_ie {
+ uint8 id;
+ uint8 len;
+ obss_params_t obss_params;
+} BWL_POST_PACKED_STRUCT;
+typedef struct dot11_obss_ie dot11_obss_ie_t;
+#define DOT11_OBSS_SCAN_IE_LEN sizeof(obss_params_t)
+
+
+BWL_PRE_PACKED_STRUCT struct vndr_ie {
+ uchar id;
+ uchar len;
+ uchar oui [3];
+ uchar data [1];
+} BWL_POST_PACKED_STRUCT;
+typedef struct vndr_ie vndr_ie_t;
+
+#define VNDR_IE_HDR_LEN 2
+#define VNDR_IE_MIN_LEN 3
+#define VNDR_IE_MAX_LEN 256
+
+
+#define WPA_VERSION 1
+#define WPA_OUI "\x00\x50\xF2"
+
+#define WPA2_VERSION 1
+#define WPA2_VERSION_LEN 2
+#define WPA2_OUI "\x00\x0F\xAC"
+
+#define WPA_OUI_LEN 3
+
+
+#define RSN_AKM_NONE 0
+#define RSN_AKM_UNSPECIFIED 1
+#define RSN_AKM_PSK 2
+
+
+#define DOT11_MAX_DEFAULT_KEYS 4
+#define DOT11_MAX_KEY_SIZE 32
+#define DOT11_MAX_IV_SIZE 16
+#define DOT11_EXT_IV_FLAG (1<<5)
+#define DOT11_WPA_KEY_RSC_LEN 8
+
+#define WEP1_KEY_SIZE 5
+#define WEP1_KEY_HEX_SIZE 10
+#define WEP128_KEY_SIZE 13
+#define WEP128_KEY_HEX_SIZE 26
+#define TKIP_MIC_SIZE 8
+#define TKIP_EOM_SIZE 7
+#define TKIP_EOM_FLAG 0x5a
+#define TKIP_KEY_SIZE 32
+#define TKIP_MIC_AUTH_TX 16
+#define TKIP_MIC_AUTH_RX 24
+#define TKIP_MIC_SUP_RX TKIP_MIC_AUTH_TX
+#define TKIP_MIC_SUP_TX TKIP_MIC_AUTH_RX
+#define AES_KEY_SIZE 16
+#define AES_MIC_SIZE 8
+
+#define SMS4_KEY_LEN 16
+#define SMS4_WPI_CBC_MAC_LEN 16
+
+
+#include <packed_section_end.h>
+
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/proto/802.11e.h b/drivers/net/wireless/bcm4329/include/proto/802.11e.h
new file mode 100644
index 0000000..1dd6f45
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/802.11e.h
@@ -0,0 +1,131 @@
+/*
+ * 802.11e protocol header file
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: 802.11e.h,v 1.5.56.1 2008/11/20 00:51:18 Exp $
+ */
+
+#ifndef _802_11e_H_
+#define _802_11e_H_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+/* This marks the start of a packed structure section. */
+#include <packed_section_start.h>
+
+
+/* WME Traffic Specification (TSPEC) element */
+#define WME_TSPEC_HDR_LEN 2 /* WME TSPEC header length */
+#define WME_TSPEC_BODY_OFF 2 /* WME TSPEC body offset */
+
+#define WME_CATEGORY_CODE_OFFSET 0 /* WME Category code offset */
+#define WME_ACTION_CODE_OFFSET 1 /* WME Action code offset */
+#define WME_TOKEN_CODE_OFFSET 2 /* WME Token code offset */
+#define WME_STATUS_CODE_OFFSET 3 /* WME Status code offset */
+
+BWL_PRE_PACKED_STRUCT struct tsinfo {
+ uint8 octets[3];
+} BWL_POST_PACKED_STRUCT;
+
+typedef struct tsinfo tsinfo_t;
+
+/* 802.11e TSPEC IE */
+typedef BWL_PRE_PACKED_STRUCT struct tspec {
+ uint8 oui[DOT11_OUI_LEN]; /* WME_OUI */
+ uint8 type; /* WME_TYPE */
+ uint8 subtype; /* WME_SUBTYPE_TSPEC */
+ uint8 version; /* WME_VERSION */
+ tsinfo_t tsinfo; /* TS Info bit field */
+ uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */
+ uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */
+ uint32 min_srv_interval; /* Minimum Service Interval (us) */
+ uint32 max_srv_interval; /* Maximum Service Interval (us) */
+ uint32 inactivity_interval; /* Inactivity Interval (us) */
+ uint32 suspension_interval; /* Suspension Interval (us) */
+ uint32 srv_start_time; /* Service Start Time (us) */
+ uint32 min_data_rate; /* Minimum Data Rate (bps) */
+ uint32 mean_data_rate; /* Mean Data Rate (bps) */
+ uint32 peak_data_rate; /* Peak Data Rate (bps) */
+ uint32 max_burst_size; /* Maximum Burst Size (bytes) */
+ uint32 delay_bound; /* Delay Bound (us) */
+ uint32 min_phy_rate; /* Minimum PHY Rate (bps) */
+ uint16 surplus_bw; /* Surplus Bandwidth Allowance (range 1.0-8.0) */
+ uint16 medium_time; /* Medium Time (32 us/s periods) */
+} BWL_POST_PACKED_STRUCT tspec_t;
+
+#define WME_TSPEC_LEN (sizeof(tspec_t)) /* not including 2-bytes of header */
+
+/* ts_info */
+/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */
+#define TS_INFO_TID_SHIFT 1 /* TS info. TID shift */
+#define TS_INFO_TID_MASK (0xf << TS_INFO_TID_SHIFT) /* TS info. TID mask */
+#define TS_INFO_CONTENTION_SHIFT 7 /* TS info. contention shift */
+#define TS_INFO_CONTENTION_MASK (0x1 << TS_INFO_CONTENTION_SHIFT) /* TS info. contention mask */
+#define TS_INFO_DIRECTION_SHIFT 5 /* TS info. direction shift */
+#define TS_INFO_DIRECTION_MASK (0x3 << TS_INFO_DIRECTION_SHIFT) /* TS info. direction mask */
+#define TS_INFO_PSB_SHIFT 2 /* TS info. PSB bit Shift */
+#define TS_INFO_PSB_MASK (1 << TS_INFO_PSB_SHIFT) /* TS info. PSB mask */
+#define TS_INFO_UPLINK (0 << TS_INFO_DIRECTION_SHIFT) /* TS info. uplink */
+#define TS_INFO_DOWNLINK (1 << TS_INFO_DIRECTION_SHIFT) /* TS info. downlink */
+#define TS_INFO_BIDIRECTIONAL (3 << TS_INFO_DIRECTION_SHIFT) /* TS info. bidirectional */
+#define TS_INFO_USER_PRIO_SHIFT 3 /* TS info. user priority shift */
+/* TS info. user priority mask */
+#define TS_INFO_USER_PRIO_MASK (0x7 << TS_INFO_USER_PRIO_SHIFT)
+
+/* Macro to get/set bit(s) field in TSINFO */
+#define WLC_CAC_GET_TID(pt) ((((pt).octets[0]) & TS_INFO_TID_MASK) >> TS_INFO_TID_SHIFT)
+#define WLC_CAC_GET_DIR(pt) ((((pt).octets[0]) & \
+ TS_INFO_DIRECTION_MASK) >> TS_INFO_DIRECTION_SHIFT)
+#define WLC_CAC_GET_PSB(pt) ((((pt).octets[1]) & TS_INFO_PSB_MASK) >> TS_INFO_PSB_SHIFT)
+#define WLC_CAC_GET_USER_PRIO(pt) ((((pt).octets[1]) & \
+ TS_INFO_USER_PRIO_MASK) >> TS_INFO_USER_PRIO_SHIFT)
+
+#define WLC_CAC_SET_TID(pt, id) ((((pt).octets[0]) & (~TS_INFO_TID_MASK)) | \
+ ((id) << TS_INFO_TID_SHIFT))
+#define WLC_CAC_SET_USER_PRIO(pt, prio) ((((pt).octets[0]) & (~TS_INFO_USER_PRIO_MASK)) | \
+ ((prio) << TS_INFO_USER_PRIO_SHIFT))
+
+/* 802.11e QBSS Load IE */
+#define QBSS_LOAD_IE_LEN 5 /* QBSS Load IE length */
+#define QBSS_LOAD_AAC_OFF 3 /* AAC offset in IE */
+
+#define CAC_ADDTS_RESP_TIMEOUT 300 /* default ADDTS response timeout in ms */
+
+/* 802.11e ADDTS status code */
+#define DOT11E_STATUS_ADMISSION_ACCEPTED 0 /* TSPEC Admission accepted status */
+#define DOT11E_STATUS_ADDTS_INVALID_PARAM 1 /* TSPEC invalid parameter status */
+#define DOT11E_STATUS_ADDTS_REFUSED_NSBW 3 /* ADDTS refused (non-sufficient BW) */
+#define DOT11E_STATUS_ADDTS_REFUSED_AWHILE 47 /* ADDTS refused but could retry later */
+
+/* 802.11e DELTS status code */
+#define DOT11E_STATUS_QSTA_LEAVE_QBSS 36 /* STA leave QBSS */
+#define DOT11E_STATUS_END_TS 37 /* END TS */
+#define DOT11E_STATUS_UNKNOWN_TS 38 /* UNKNOWN TS */
+#define DOT11E_STATUS_QSTA_REQ_TIMEOUT 39 /* STA ADDTS request timeout */
+
+
+/* This marks the end of a packed structure section. */
+#include <packed_section_end.h>
+
+#endif /* _802_11e_CAC_H_ */
diff --git a/drivers/net/wireless/bcm4329/include/proto/802.1d.h b/drivers/net/wireless/bcm4329/include/proto/802.1d.h
new file mode 100644
index 0000000..45c728b
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/802.1d.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * Fundamental types and constants relating to 802.1D
+ *
+ * $Id: 802.1d.h,v 9.3 2007/04/10 21:33:06 Exp $
+ */
+
+
+#ifndef _802_1_D_
+#define _802_1_D_
+
+
+#define PRIO_8021D_NONE 2
+#define PRIO_8021D_BK 1
+#define PRIO_8021D_BE 0
+#define PRIO_8021D_EE 3
+#define PRIO_8021D_CL 4
+#define PRIO_8021D_VI 5
+#define PRIO_8021D_VO 6
+#define PRIO_8021D_NC 7
+#define MAXPRIO 7
+#define NUMPRIO (MAXPRIO + 1)
+
+#define ALLPRIO -1
+
+
+#define PRIO2PREC(prio) \
+ (((prio) == PRIO_8021D_NONE || (prio) == PRIO_8021D_BE) ? ((prio^2)) : (prio))
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/proto/bcmeth.h b/drivers/net/wireless/bcm4329/include/proto/bcmeth.h
new file mode 100644
index 0000000..fdb5a2a
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/bcmeth.h
@@ -0,0 +1,83 @@
+/*
+ * Broadcom Ethernettype protocol definitions
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: bcmeth.h,v 9.9.46.1 2008/11/20 00:51:20 Exp $
+ */
+
+
+
+
+#ifndef _BCMETH_H_
+#define _BCMETH_H_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+
+#include <packed_section_start.h>
+
+
+
+
+
+
+
+#define BCMILCP_SUBTYPE_RATE 1
+#define BCMILCP_SUBTYPE_LINK 2
+#define BCMILCP_SUBTYPE_CSA 3
+#define BCMILCP_SUBTYPE_LARQ 4
+#define BCMILCP_SUBTYPE_VENDOR 5
+#define BCMILCP_SUBTYPE_FLH 17
+
+#define BCMILCP_SUBTYPE_VENDOR_LONG 32769
+#define BCMILCP_SUBTYPE_CERT 32770
+#define BCMILCP_SUBTYPE_SES 32771
+
+
+#define BCMILCP_BCM_SUBTYPE_RESERVED 0
+#define BCMILCP_BCM_SUBTYPE_EVENT 1
+#define BCMILCP_BCM_SUBTYPE_SES 2
+
+
+#define BCMILCP_BCM_SUBTYPE_DPT 4
+
+#define BCMILCP_BCM_SUBTYPEHDR_MINLENGTH 8
+#define BCMILCP_BCM_SUBTYPEHDR_VERSION 0
+
+
+typedef BWL_PRE_PACKED_STRUCT struct bcmeth_hdr
+{
+ uint16 subtype;
+ uint16 length;
+ uint8 version;
+ uint8 oui[3];
+
+ uint16 usr_subtype;
+} BWL_POST_PACKED_STRUCT bcmeth_hdr_t;
+
+
+
+#include <packed_section_end.h>
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/proto/bcmevent.h b/drivers/net/wireless/bcm4329/include/proto/bcmevent.h
new file mode 100644
index 0000000..1f8ecb1
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/bcmevent.h
@@ -0,0 +1,212 @@
+/*
+ * Broadcom Event protocol definitions
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ *
+ * Dependencies: proto/bcmeth.h
+ *
+ * $Id: bcmevent.h,v 9.34.4.1.20.16.64.1 2010/11/08 21:57:03 Exp $
+ *
+ */
+
+
+
+
+#ifndef _BCMEVENT_H_
+#define _BCMEVENT_H_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+
+#include <packed_section_start.h>
+
+#define BCM_EVENT_MSG_VERSION 1
+#define BCM_MSG_IFNAME_MAX 16
+
+
+#define WLC_EVENT_MSG_LINK 0x01
+#define WLC_EVENT_MSG_FLUSHTXQ 0x02
+#define WLC_EVENT_MSG_GROUP 0x04
+
+
+typedef BWL_PRE_PACKED_STRUCT struct
+{
+ uint16 version;
+ uint16 flags;
+ uint32 event_type;
+ uint32 status;
+ uint32 reason;
+ uint32 auth_type;
+ uint32 datalen;
+ struct ether_addr addr;
+ char ifname[BCM_MSG_IFNAME_MAX];
+} BWL_POST_PACKED_STRUCT wl_event_msg_t;
+
+
+typedef BWL_PRE_PACKED_STRUCT struct bcm_event {
+ struct ether_header eth;
+ bcmeth_hdr_t bcm_hdr;
+ wl_event_msg_t event;
+
+} BWL_POST_PACKED_STRUCT bcm_event_t;
+
+#define BCM_MSG_LEN (sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header))
+
+
+#define WLC_E_SET_SSID 0
+#define WLC_E_JOIN 1
+#define WLC_E_START 2
+#define WLC_E_AUTH 3
+#define WLC_E_AUTH_IND 4
+#define WLC_E_DEAUTH 5
+#define WLC_E_DEAUTH_IND 6
+#define WLC_E_ASSOC 7
+#define WLC_E_ASSOC_IND 8
+#define WLC_E_REASSOC 9
+#define WLC_E_REASSOC_IND 10
+#define WLC_E_DISASSOC 11
+#define WLC_E_DISASSOC_IND 12
+#define WLC_E_QUIET_START 13
+#define WLC_E_QUIET_END 14
+#define WLC_E_BEACON_RX 15
+#define WLC_E_LINK 16
+#define WLC_E_MIC_ERROR 17
+#define WLC_E_NDIS_LINK 18
+#define WLC_E_ROAM 19
+#define WLC_E_TXFAIL 20
+#define WLC_E_PMKID_CACHE 21
+#define WLC_E_RETROGRADE_TSF 22
+#define WLC_E_PRUNE 23
+#define WLC_E_AUTOAUTH 24
+#define WLC_E_EAPOL_MSG 25
+#define WLC_E_SCAN_COMPLETE 26
+#define WLC_E_ADDTS_IND 27
+#define WLC_E_DELTS_IND 28
+#define WLC_E_BCNSENT_IND 29
+#define WLC_E_BCNRX_MSG 30
+#define WLC_E_BCNLOST_MSG 31
+#define WLC_E_ROAM_PREP 32
+#define WLC_E_PFN_NET_FOUND 33
+#define WLC_E_PFN_NET_LOST 34
+#define WLC_E_RESET_COMPLETE 35
+#define WLC_E_JOIN_START 36
+#define WLC_E_ROAM_START 37
+#define WLC_E_ASSOC_START 38
+#define WLC_E_IBSS_ASSOC 39
+#define WLC_E_RADIO 40
+#define WLC_E_PSM_WATCHDOG 41
+#define WLC_E_PROBREQ_MSG 44
+#define WLC_E_SCAN_CONFIRM_IND 45
+#define WLC_E_PSK_SUP 46
+#define WLC_E_COUNTRY_CODE_CHANGED 47
+#define WLC_E_EXCEEDED_MEDIUM_TIME 48
+#define WLC_E_ICV_ERROR 49
+#define WLC_E_UNICAST_DECODE_ERROR 50
+#define WLC_E_MULTICAST_DECODE_ERROR 51
+#define WLC_E_TRACE 52
+#define WLC_E_IF 54
+#define WLC_E_RSSI 56
+#define WLC_E_PFN_SCAN_COMPLETE 57
+#define WLC_E_ACTION_FRAME 58
+#define WLC_E_ACTION_FRAME_COMPLETE 59
+
+#define WLC_E_ESCAN_RESULT 69
+#define WLC_E_WAKE_EVENT 70
+#define WLC_E_RELOAD 71
+#define WLC_E_LAST 72
+
+
+
+#define WLC_E_STATUS_SUCCESS 0
+#define WLC_E_STATUS_FAIL 1
+#define WLC_E_STATUS_TIMEOUT 2
+#define WLC_E_STATUS_NO_NETWORKS 3
+#define WLC_E_STATUS_ABORT 4
+#define WLC_E_STATUS_NO_ACK 5
+#define WLC_E_STATUS_UNSOLICITED 6
+#define WLC_E_STATUS_ATTEMPT 7
+#define WLC_E_STATUS_PARTIAL 8
+#define WLC_E_STATUS_NEWSCAN 9
+#define WLC_E_STATUS_NEWASSOC 10
+#define WLC_E_STATUS_11HQUIET 11
+#define WLC_E_STATUS_SUPPRESS 12
+#define WLC_E_STATUS_NOCHANS 13
+#define WLC_E_STATUS_CCXFASTRM 14
+#define WLC_E_STATUS_CS_ABORT 15
+
+
+#define WLC_E_REASON_INITIAL_ASSOC 0
+#define WLC_E_REASON_LOW_RSSI 1
+#define WLC_E_REASON_DEAUTH 2
+#define WLC_E_REASON_DISASSOC 3
+#define WLC_E_REASON_BCNS_LOST 4
+#define WLC_E_REASON_FAST_ROAM_FAILED 5
+#define WLC_E_REASON_DIRECTED_ROAM 6
+#define WLC_E_REASON_TSPEC_REJECTED 7
+#define WLC_E_REASON_BETTER_AP 8
+
+
+#define WLC_E_PRUNE_ENCR_MISMATCH 1
+#define WLC_E_PRUNE_BCAST_BSSID 2
+#define WLC_E_PRUNE_MAC_DENY 3
+#define WLC_E_PRUNE_MAC_NA 4
+#define WLC_E_PRUNE_REG_PASSV 5
+#define WLC_E_PRUNE_SPCT_MGMT 6
+#define WLC_E_PRUNE_RADAR 7
+#define WLC_E_RSN_MISMATCH 8
+#define WLC_E_PRUNE_NO_COMMON_RATES 9
+#define WLC_E_PRUNE_BASIC_RATES 10
+#define WLC_E_PRUNE_CIPHER_NA 12
+#define WLC_E_PRUNE_KNOWN_STA 13
+#define WLC_E_PRUNE_WDS_PEER 15
+#define WLC_E_PRUNE_QBSS_LOAD 16
+#define WLC_E_PRUNE_HOME_AP 17
+
+
+#define WLC_E_SUP_OTHER 0
+#define WLC_E_SUP_DECRYPT_KEY_DATA 1
+#define WLC_E_SUP_BAD_UCAST_WEP128 2
+#define WLC_E_SUP_BAD_UCAST_WEP40 3
+#define WLC_E_SUP_UNSUP_KEY_LEN 4
+#define WLC_E_SUP_PW_KEY_CIPHER 5
+#define WLC_E_SUP_MSG3_TOO_MANY_IE 6
+#define WLC_E_SUP_MSG3_IE_MISMATCH 7
+#define WLC_E_SUP_NO_INSTALL_FLAG 8
+#define WLC_E_SUP_MSG3_NO_GTK 9
+#define WLC_E_SUP_GRP_KEY_CIPHER 10
+#define WLC_E_SUP_GRP_MSG1_NO_GTK 11
+#define WLC_E_SUP_GTK_DECRYPT_FAIL 12
+#define WLC_E_SUP_SEND_FAIL 13
+#define WLC_E_SUP_DEAUTH 14
+#define WLC_E_SUP_WPA_PSK_TMO 15
+
+
+#define WLC_E_IF_ADD 1
+#define WLC_E_IF_DEL 2
+
+#define WLC_E_RELOAD_STATUS1 1
+
+#include <packed_section_end.h>
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/proto/bcmip.h b/drivers/net/wireless/bcm4329/include/proto/bcmip.h
new file mode 100644
index 0000000..9d2fd6f
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/bcmip.h
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * Fundamental constants relating to IP Protocol
+ *
+ * $Id: bcmip.h,v 9.16.186.4 2009/01/27 04:25:25 Exp $
+ */
+
+
+#ifndef _bcmip_h_
+#define _bcmip_h_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+
+#include <packed_section_start.h>
+
+
+
+#define IP_VER_OFFSET 0x0
+#define IP_VER_MASK 0xf0
+#define IP_VER_SHIFT 4
+#define IP_VER_4 4
+#define IP_VER_6 6
+
+#define IP_VER(ip_body) \
+ ((((uint8 *)(ip_body))[IP_VER_OFFSET] & IP_VER_MASK) >> IP_VER_SHIFT)
+
+#define IP_PROT_ICMP 0x1
+#define IP_PROT_TCP 0x6
+#define IP_PROT_UDP 0x11
+
+
+#define IPV4_VER_HL_OFFSET 0
+#define IPV4_TOS_OFFSET 1
+#define IPV4_PKTLEN_OFFSET 2
+#define IPV4_PKTFLAG_OFFSET 6
+#define IPV4_PROT_OFFSET 9
+#define IPV4_CHKSUM_OFFSET 10
+#define IPV4_SRC_IP_OFFSET 12
+#define IPV4_DEST_IP_OFFSET 16
+#define IPV4_OPTIONS_OFFSET 20
+
+
+#define IPV4_VER_MASK 0xf0
+#define IPV4_VER_SHIFT 4
+
+#define IPV4_HLEN_MASK 0x0f
+#define IPV4_HLEN(ipv4_body) (4 * (((uint8 *)(ipv4_body))[IPV4_VER_HL_OFFSET] & IPV4_HLEN_MASK))
+
+#define IPV4_ADDR_LEN 4
+
+#define IPV4_ADDR_NULL(a) ((((uint8 *)(a))[0] | ((uint8 *)(a))[1] | \
+ ((uint8 *)(a))[2] | ((uint8 *)(a))[3]) == 0)
+
+#define IPV4_ADDR_BCAST(a) ((((uint8 *)(a))[0] & ((uint8 *)(a))[1] & \
+ ((uint8 *)(a))[2] & ((uint8 *)(a))[3]) == 0xff)
+
+#define IPV4_TOS_DSCP_MASK 0xfc
+#define IPV4_TOS_DSCP_SHIFT 2
+
+#define IPV4_TOS(ipv4_body) (((uint8 *)(ipv4_body))[IPV4_TOS_OFFSET])
+
+#define IPV4_TOS_PREC_MASK 0xe0
+#define IPV4_TOS_PREC_SHIFT 5
+
+#define IPV4_TOS_LOWDELAY 0x10
+#define IPV4_TOS_THROUGHPUT 0x8
+#define IPV4_TOS_RELIABILITY 0x4
+
+#define IPV4_PROT(ipv4_body) (((uint8 *)(ipv4_body))[IPV4_PROT_OFFSET])
+
+#define IPV4_FRAG_RESV 0x8000
+#define IPV4_FRAG_DONT 0x4000
+#define IPV4_FRAG_MORE 0x2000
+#define IPV4_FRAG_OFFSET_MASK 0x1fff
+
+#define IPV4_ADDR_STR_LEN 16
+
+
+BWL_PRE_PACKED_STRUCT struct ipv4_addr {
+ uint8 addr[IPV4_ADDR_LEN];
+} BWL_POST_PACKED_STRUCT;
+
+BWL_PRE_PACKED_STRUCT struct ipv4_hdr {
+ uint8 version_ihl;
+ uint8 tos;
+ uint16 tot_len;
+ uint16 id;
+ uint16 frag;
+ uint8 ttl;
+ uint8 prot;
+ uint16 hdr_chksum;
+ uint8 src_ip[IPV4_ADDR_LEN];
+ uint8 dst_ip[IPV4_ADDR_LEN];
+} BWL_POST_PACKED_STRUCT;
+
+
+#define IPV6_PAYLOAD_LEN_OFFSET 4
+#define IPV6_NEXT_HDR_OFFSET 6
+#define IPV6_HOP_LIMIT_OFFSET 7
+#define IPV6_SRC_IP_OFFSET 8
+#define IPV6_DEST_IP_OFFSET 24
+
+
+#define IPV6_TRAFFIC_CLASS(ipv6_body) \
+ (((((uint8 *)(ipv6_body))[0] & 0x0f) << 4) | \
+ ((((uint8 *)(ipv6_body))[1] & 0xf0) >> 4))
+
+#define IPV6_FLOW_LABEL(ipv6_body) \
+ (((((uint8 *)(ipv6_body))[1] & 0x0f) << 16) | \
+ (((uint8 *)(ipv6_body))[2] << 8) | \
+ (((uint8 *)(ipv6_body))[3]))
+
+#define IPV6_PAYLOAD_LEN(ipv6_body) \
+ ((((uint8 *)(ipv6_body))[IPV6_PAYLOAD_LEN_OFFSET + 0] << 8) | \
+ ((uint8 *)(ipv6_body))[IPV6_PAYLOAD_LEN_OFFSET + 1])
+
+#define IPV6_NEXT_HDR(ipv6_body) \
+ (((uint8 *)(ipv6_body))[IPV6_NEXT_HDR_OFFSET])
+
+#define IPV6_PROT(ipv6_body) IPV6_NEXT_HDR(ipv6_body)
+
+#define IPV6_ADDR_LEN 16
+
+
+#ifndef IP_TOS
+#define IP_TOS(ip_body) \
+ (IP_VER(ip_body) == IP_VER_4 ? IPV4_TOS(ip_body) : \
+ IP_VER(ip_body) == IP_VER_6 ? IPV6_TRAFFIC_CLASS(ip_body) : 0)
+#endif
+
+
+
+#include <packed_section_end.h>
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/proto/eapol.h b/drivers/net/wireless/bcm4329/include/proto/eapol.h
new file mode 100644
index 0000000..95e76ff
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/eapol.h
@@ -0,0 +1,172 @@
+/*
+ * 802.1x EAPOL definitions
+ *
+ * See
+ * IEEE Std 802.1X-2001
+ * IEEE 802.1X RADIUS Usage Guidelines
+ *
+ * Copyright (C) 2002 Broadcom Corporation
+ *
+ * $Id: eapol.h,v 9.18.260.1.2.1.6.6 2009/04/08 05:00:08 Exp $
+ */
+
+#ifndef _eapol_h_
+#define _eapol_h_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+/* This marks the start of a packed structure section. */
+#include <packed_section_start.h>
+
+#define AKW_BLOCK_LEN 8 /* The only def we need here */
+
+/* EAPOL for 802.3/Ethernet */
+typedef struct {
+ struct ether_header eth; /* 802.3/Ethernet header */
+ unsigned char version; /* EAPOL protocol version */
+ unsigned char type; /* EAPOL type */
+ unsigned short length; /* Length of body */
+ unsigned char body[1]; /* Body (optional) */
+} eapol_header_t;
+
+#define EAPOL_HEADER_LEN 18
+
+/* EAPOL version */
+#define WPA2_EAPOL_VERSION 2
+#define WPA_EAPOL_VERSION 1
+#define LEAP_EAPOL_VERSION 1
+#define SES_EAPOL_VERSION 1
+
+/* EAPOL types */
+#define EAP_PACKET 0
+#define EAPOL_START 1
+#define EAPOL_LOGOFF 2
+#define EAPOL_KEY 3
+#define EAPOL_ASF 4
+
+/* EAPOL-Key types */
+#define EAPOL_RC4_KEY 1
+#define EAPOL_WPA2_KEY 2 /* 802.11i/WPA2 */
+#define EAPOL_WPA_KEY 254 /* WPA */
+
+/* RC4 EAPOL-Key header field sizes */
+#define EAPOL_KEY_REPLAY_LEN 8
+#define EAPOL_KEY_IV_LEN 16
+#define EAPOL_KEY_SIG_LEN 16
+
+/* RC4 EAPOL-Key */
+typedef BWL_PRE_PACKED_STRUCT struct {
+ unsigned char type; /* Key Descriptor Type */
+ unsigned short length; /* Key Length (unaligned) */
+ unsigned char replay[EAPOL_KEY_REPLAY_LEN]; /* Replay Counter */
+ unsigned char iv[EAPOL_KEY_IV_LEN]; /* Key IV */
+ unsigned char index; /* Key Flags & Index */
+ unsigned char signature[EAPOL_KEY_SIG_LEN]; /* Key Signature */
+ unsigned char key[1]; /* Key (optional) */
+} BWL_POST_PACKED_STRUCT eapol_key_header_t;
+
+#define EAPOL_KEY_HEADER_LEN 44
+
+/* RC4 EAPOL-Key flags */
+#define EAPOL_KEY_FLAGS_MASK 0x80
+#define EAPOL_KEY_BROADCAST 0
+#define EAPOL_KEY_UNICAST 0x80
+
+/* RC4 EAPOL-Key index */
+#define EAPOL_KEY_INDEX_MASK 0x7f
+
+/* WPA/802.11i/WPA2 EAPOL-Key header field sizes */
+#define EAPOL_WPA_KEY_REPLAY_LEN 8
+#define EAPOL_WPA_KEY_NONCE_LEN 32
+#define EAPOL_WPA_KEY_IV_LEN 16
+#define EAPOL_WPA_KEY_ID_LEN 8
+#define EAPOL_WPA_KEY_RSC_LEN 8
+#define EAPOL_WPA_KEY_MIC_LEN 16
+#define EAPOL_WPA_KEY_DATA_LEN (EAPOL_WPA_MAX_KEY_SIZE + AKW_BLOCK_LEN)
+#define EAPOL_WPA_MAX_KEY_SIZE 32
+
+/* WPA EAPOL-Key */
+typedef BWL_PRE_PACKED_STRUCT struct {
+ unsigned char type; /* Key Descriptor Type */
+ unsigned short key_info; /* Key Information (unaligned) */
+ unsigned short key_len; /* Key Length (unaligned) */
+ unsigned char replay[EAPOL_WPA_KEY_REPLAY_LEN]; /* Replay Counter */
+ unsigned char nonce[EAPOL_WPA_KEY_NONCE_LEN]; /* Nonce */
+ unsigned char iv[EAPOL_WPA_KEY_IV_LEN]; /* Key IV */
+ unsigned char rsc[EAPOL_WPA_KEY_RSC_LEN]; /* Key RSC */
+ unsigned char id[EAPOL_WPA_KEY_ID_LEN]; /* WPA:Key ID, 802.11i/WPA2: Reserved */
+ unsigned char mic[EAPOL_WPA_KEY_MIC_LEN]; /* Key MIC */
+ unsigned short data_len; /* Key Data Length */
+ unsigned char data[EAPOL_WPA_KEY_DATA_LEN]; /* Key data */
+} BWL_POST_PACKED_STRUCT eapol_wpa_key_header_t;
+
+#define EAPOL_WPA_KEY_LEN 95
+
+/* WPA/802.11i/WPA2 KEY KEY_INFO bits */
+#define WPA_KEY_DESC_V1 0x01
+#define WPA_KEY_DESC_V2 0x02
+#define WPA_KEY_PAIRWISE 0x08
+#define WPA_KEY_INSTALL 0x40
+#define WPA_KEY_ACK 0x80
+#define WPA_KEY_MIC 0x100
+#define WPA_KEY_SECURE 0x200
+#define WPA_KEY_ERROR 0x400
+#define WPA_KEY_REQ 0x800
+
+/* WPA-only KEY KEY_INFO bits */
+#define WPA_KEY_INDEX_0 0x00
+#define WPA_KEY_INDEX_1 0x10
+#define WPA_KEY_INDEX_2 0x20
+#define WPA_KEY_INDEX_3 0x30
+#define WPA_KEY_INDEX_MASK 0x30
+#define WPA_KEY_INDEX_SHIFT 0x04
+
+/* 802.11i/WPA2-only KEY KEY_INFO bits */
+#define WPA_KEY_ENCRYPTED_DATA 0x1000
+
+/* Key Data encapsulation */
+typedef BWL_PRE_PACKED_STRUCT struct {
+ uint8 type;
+ uint8 length;
+ uint8 oui[3];
+ uint8 subtype;
+ uint8 data[1];
+} BWL_POST_PACKED_STRUCT eapol_wpa2_encap_data_t;
+
+#define EAPOL_WPA2_ENCAP_DATA_HDR_LEN 6
+
+#define WPA2_KEY_DATA_SUBTYPE_GTK 1
+#define WPA2_KEY_DATA_SUBTYPE_STAKEY 2
+#define WPA2_KEY_DATA_SUBTYPE_MAC 3
+#define WPA2_KEY_DATA_SUBTYPE_PMKID 4
+
+/* GTK encapsulation */
+typedef BWL_PRE_PACKED_STRUCT struct {
+ uint8 flags;
+ uint8 reserved;
+ uint8 gtk[EAPOL_WPA_MAX_KEY_SIZE];
+} BWL_POST_PACKED_STRUCT eapol_wpa2_key_gtk_encap_t;
+
+#define EAPOL_WPA2_KEY_GTK_ENCAP_HDR_LEN 2
+
+#define WPA2_GTK_INDEX_MASK 0x03
+#define WPA2_GTK_INDEX_SHIFT 0x00
+
+#define WPA2_GTK_TRANSMIT 0x04
+
+/* STAKey encapsulation */
+typedef BWL_PRE_PACKED_STRUCT struct {
+ uint8 reserved[2];
+ uint8 mac[ETHER_ADDR_LEN];
+ uint8 stakey[EAPOL_WPA_MAX_KEY_SIZE];
+} BWL_POST_PACKED_STRUCT eapol_wpa2_key_stakey_encap_t;
+
+#define WPA2_KEY_DATA_PAD 0xdd
+
+
+/* This marks the end of a packed structure section. */
+#include <packed_section_end.h>
+
+#endif /* _eapol_h_ */
diff --git a/drivers/net/wireless/bcm4329/include/proto/ethernet.h b/drivers/net/wireless/bcm4329/include/proto/ethernet.h
new file mode 100644
index 0000000..9ad2ea0
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/ethernet.h
@@ -0,0 +1,148 @@
+/*
+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: ethernet.h,v 9.45.56.5 2010/02/22 22:04:36 Exp $
+ */
+
+
+#ifndef _NET_ETHERNET_H_
+#define _NET_ETHERNET_H_
+
+#ifndef _TYPEDEFS_H_
+#include "typedefs.h"
+#endif
+
+
+#include <packed_section_start.h>
+
+
+
+#define ETHER_ADDR_LEN 6
+
+
+#define ETHER_TYPE_LEN 2
+
+
+#define ETHER_CRC_LEN 4
+
+
+#define ETHER_HDR_LEN (ETHER_ADDR_LEN * 2 + ETHER_TYPE_LEN)
+
+
+#define ETHER_MIN_LEN 64
+
+
+#define ETHER_MIN_DATA 46
+
+
+#define ETHER_MAX_LEN 1518
+
+
+#define ETHER_MAX_DATA 1500
+
+
+#define ETHER_TYPE_MIN 0x0600
+#define ETHER_TYPE_IP 0x0800
+#define ETHER_TYPE_ARP 0x0806
+#define ETHER_TYPE_8021Q 0x8100
+#define ETHER_TYPE_BRCM 0x886c
+#define ETHER_TYPE_802_1X 0x888e
+#define ETHER_TYPE_WAI 0x88b4
+#ifdef BCMWPA2
+#define ETHER_TYPE_802_1X_PREAUTH 0x88c7
+#endif
+
+
+#define ETHER_BRCM_SUBTYPE_LEN 4
+#define ETHER_BRCM_CRAM 1
+
+
+#define ETHER_DEST_OFFSET (0 * ETHER_ADDR_LEN)
+#define ETHER_SRC_OFFSET (1 * ETHER_ADDR_LEN)
+#define ETHER_TYPE_OFFSET (2 * ETHER_ADDR_LEN)
+
+
+#define ETHER_IS_VALID_LEN(foo) \
+ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
+
+
+#ifndef __INCif_etherh
+
+BWL_PRE_PACKED_STRUCT struct ether_header {
+ uint8 ether_dhost[ETHER_ADDR_LEN];
+ uint8 ether_shost[ETHER_ADDR_LEN];
+ uint16 ether_type;
+} BWL_POST_PACKED_STRUCT;
+
+
+BWL_PRE_PACKED_STRUCT struct ether_addr {
+ uint8 octet[ETHER_ADDR_LEN];
+} BWL_POST_PACKED_STRUCT;
+#endif
+
+
+#define ETHER_SET_LOCALADDR(ea) (((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] | 2))
+#define ETHER_IS_LOCALADDR(ea) (((uint8 *)(ea))[0] & 2)
+#define ETHER_CLR_LOCALADDR(ea) (((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] & 0xd))
+#define ETHER_TOGGLE_LOCALADDR(ea) (((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] ^ 2))
+
+
+#define ETHER_SET_UNICAST(ea) (((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] & ~1))
+
+
+#define ETHER_ISMULTI(ea) (((const uint8 *)(ea))[0] & 1)
+
+
+
+#define ether_cmp(a, b) (!(((short*)a)[0] == ((short*)b)[0]) | \
+ !(((short*)a)[1] == ((short*)b)[1]) | \
+ !(((short*)a)[2] == ((short*)b)[2]))
+
+
+#define ether_copy(s, d) { \
+ ((short*)d)[0] = ((short*)s)[0]; \
+ ((short*)d)[1] = ((short*)s)[1]; \
+ ((short*)d)[2] = ((short*)s)[2]; }
+
+
+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
+static const struct ether_addr ether_null = {{0, 0, 0, 0, 0, 0}};
+
+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \
+ ((uint8 *)(ea))[1] & \
+ ((uint8 *)(ea))[2] & \
+ ((uint8 *)(ea))[3] & \
+ ((uint8 *)(ea))[4] & \
+ ((uint8 *)(ea))[5]) == 0xff)
+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \
+ ((uint8 *)(ea))[1] | \
+ ((uint8 *)(ea))[2] | \
+ ((uint8 *)(ea))[3] | \
+ ((uint8 *)(ea))[4] | \
+ ((uint8 *)(ea))[5]) == 0)
+
+
+
+#include <packed_section_end.h>
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/proto/sdspi.h b/drivers/net/wireless/bcm4329/include/proto/sdspi.h
new file mode 100644
index 0000000..7739e68
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/sdspi.h
@@ -0,0 +1,71 @@
+/*
+ * SD-SPI Protocol Standard
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sdspi.h,v 9.1.20.1 2008/05/06 22:59:19 Exp $
+ */
+
+#define SPI_START_M BITFIELD_MASK(1) /* Bit [31] - Start Bit */
+#define SPI_START_S 31
+#define SPI_DIR_M BITFIELD_MASK(1) /* Bit [30] - Direction */
+#define SPI_DIR_S 30
+#define SPI_CMD_INDEX_M BITFIELD_MASK(6) /* Bits [29:24] - Command number */
+#define SPI_CMD_INDEX_S 24
+#define SPI_RW_M BITFIELD_MASK(1) /* Bit [23] - Read=0, Write=1 */
+#define SPI_RW_S 23
+#define SPI_FUNC_M BITFIELD_MASK(3) /* Bits [22:20] - Function Number */
+#define SPI_FUNC_S 20
+#define SPI_RAW_M BITFIELD_MASK(1) /* Bit [19] - Read After Wr */
+#define SPI_RAW_S 19
+#define SPI_STUFF_M BITFIELD_MASK(1) /* Bit [18] - Stuff bit */
+#define SPI_STUFF_S 18
+#define SPI_BLKMODE_M BITFIELD_MASK(1) /* Bit [19] - Blockmode 1=blk */
+#define SPI_BLKMODE_S 19
+#define SPI_OPCODE_M BITFIELD_MASK(1) /* Bit [18] - OP Code */
+#define SPI_OPCODE_S 18
+#define SPI_ADDR_M BITFIELD_MASK(17) /* Bits [17:1] - Address */
+#define SPI_ADDR_S 1
+#define SPI_STUFF0_M BITFIELD_MASK(1) /* Bit [0] - Stuff bit */
+#define SPI_STUFF0_S 0
+
+#define SPI_RSP_START_M BITFIELD_MASK(1) /* Bit [7] - Start Bit (always 0) */
+#define SPI_RSP_START_S 7
+#define SPI_RSP_PARAM_ERR_M BITFIELD_MASK(1) /* Bit [6] - Parameter Error */
+#define SPI_RSP_PARAM_ERR_S 6
+#define SPI_RSP_RFU5_M BITFIELD_MASK(1) /* Bit [5] - RFU (Always 0) */
+#define SPI_RSP_RFU5_S 5
+#define SPI_RSP_FUNC_ERR_M BITFIELD_MASK(1) /* Bit [4] - Function number error */
+#define SPI_RSP_FUNC_ERR_S 4
+#define SPI_RSP_CRC_ERR_M BITFIELD_MASK(1) /* Bit [3] - COM CRC Error */
+#define SPI_RSP_CRC_ERR_S 3
+#define SPI_RSP_ILL_CMD_M BITFIELD_MASK(1) /* Bit [2] - Illegal Command error */
+#define SPI_RSP_ILL_CMD_S 2
+#define SPI_RSP_RFU1_M BITFIELD_MASK(1) /* Bit [1] - RFU (Always 0) */
+#define SPI_RSP_RFU1_S 1
+#define SPI_RSP_IDLE_M BITFIELD_MASK(1) /* Bit [0] - In idle state */
+#define SPI_RSP_IDLE_S 0
+
+/* SD-SPI Protocol Definitions */
+#define SDSPI_COMMAND_LEN 6 /* Number of bytes in an SD command */
+#define SDSPI_START_BLOCK 0xFE /* SD Start Block Token */
+#define SDSPI_IDLE_PAD 0xFF /* SD-SPI idle value for MOSI */
+#define SDSPI_START_BIT_MASK 0x80
diff --git a/drivers/net/wireless/bcm4329/include/proto/vlan.h b/drivers/net/wireless/bcm4329/include/proto/vlan.h
new file mode 100644
index 0000000..670bc44
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/vlan.h
@@ -0,0 +1,63 @@
+/*
+ * 802.1Q VLAN protocol definitions
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: vlan.h,v 9.4.196.2 2008/12/07 21:19:20 Exp $
+ */
+
+
+#ifndef _vlan_h_
+#define _vlan_h_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+
+#include <packed_section_start.h>
+
+#define VLAN_VID_MASK 0xfff
+#define VLAN_CFI_SHIFT 12
+#define VLAN_PRI_SHIFT 13
+
+#define VLAN_PRI_MASK 7
+
+#define VLAN_TAG_LEN 4
+#define VLAN_TAG_OFFSET (2 * ETHER_ADDR_LEN)
+
+#define VLAN_TPID 0x8100
+
+struct ethervlan_header {
+ uint8 ether_dhost[ETHER_ADDR_LEN];
+ uint8 ether_shost[ETHER_ADDR_LEN];
+ uint16 vlan_type;
+ uint16 vlan_tag;
+ uint16 ether_type;
+};
+
+#define ETHERVLAN_HDR_LEN (ETHER_HDR_LEN + VLAN_TAG_LEN)
+
+
+
+#include <packed_section_end.h>
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/proto/wpa.h b/drivers/net/wireless/bcm4329/include/proto/wpa.h
new file mode 100644
index 0000000..f5d0cd5
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/proto/wpa.h
@@ -0,0 +1,159 @@
+/*
+ * Fundamental types and constants relating to WPA
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: wpa.h,v 1.16.166.1.20.1 2008/11/20 00:51:31 Exp $
+ */
+
+
+#ifndef _proto_wpa_h_
+#define _proto_wpa_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+
+
+
+#include <packed_section_start.h>
+
+
+
+
+#define DOT11_RC_INVALID_WPA_IE 13
+#define DOT11_RC_MIC_FAILURE 14
+#define DOT11_RC_4WH_TIMEOUT 15
+#define DOT11_RC_GTK_UPDATE_TIMEOUT 16
+#define DOT11_RC_WPA_IE_MISMATCH 17
+#define DOT11_RC_INVALID_MC_CIPHER 18
+#define DOT11_RC_INVALID_UC_CIPHER 19
+#define DOT11_RC_INVALID_AKMP 20
+#define DOT11_RC_BAD_WPA_VERSION 21
+#define DOT11_RC_INVALID_WPA_CAP 22
+#define DOT11_RC_8021X_AUTH_FAIL 23
+
+#define WPA2_PMKID_LEN 16
+
+
+typedef BWL_PRE_PACKED_STRUCT struct
+{
+ uint8 tag;
+ uint8 length;
+ uint8 oui[3];
+ uint8 oui_type;
+ BWL_PRE_PACKED_STRUCT struct {
+ uint8 low;
+ uint8 high;
+ } BWL_POST_PACKED_STRUCT version;
+} BWL_POST_PACKED_STRUCT wpa_ie_fixed_t;
+#define WPA_IE_OUITYPE_LEN 4
+#define WPA_IE_FIXED_LEN 8
+#define WPA_IE_TAG_FIXED_LEN 6
+
+typedef BWL_PRE_PACKED_STRUCT struct {
+ uint8 tag;
+ uint8 length;
+ BWL_PRE_PACKED_STRUCT struct {
+ uint8 low;
+ uint8 high;
+ } BWL_POST_PACKED_STRUCT version;
+} BWL_POST_PACKED_STRUCT wpa_rsn_ie_fixed_t;
+#define WPA_RSN_IE_FIXED_LEN 4
+#define WPA_RSN_IE_TAG_FIXED_LEN 2
+typedef uint8 wpa_pmkid_t[WPA2_PMKID_LEN];
+
+
+typedef BWL_PRE_PACKED_STRUCT struct
+{
+ uint8 oui[3];
+ uint8 type;
+} BWL_POST_PACKED_STRUCT wpa_suite_t, wpa_suite_mcast_t;
+#define WPA_SUITE_LEN 4
+
+
+typedef BWL_PRE_PACKED_STRUCT struct
+{
+ BWL_PRE_PACKED_STRUCT struct {
+ uint8 low;
+ uint8 high;
+ } BWL_POST_PACKED_STRUCT count;
+ wpa_suite_t list[1];
+} BWL_POST_PACKED_STRUCT wpa_suite_ucast_t, wpa_suite_auth_key_mgmt_t;
+#define WPA_IE_SUITE_COUNT_LEN 2
+typedef BWL_PRE_PACKED_STRUCT struct
+{
+ BWL_PRE_PACKED_STRUCT struct {
+ uint8 low;
+ uint8 high;
+ } BWL_POST_PACKED_STRUCT count;
+ wpa_pmkid_t list[1];
+} BWL_POST_PACKED_STRUCT wpa_pmkid_list_t;
+
+
+#define WPA_CIPHER_NONE 0
+#define WPA_CIPHER_WEP_40 1
+#define WPA_CIPHER_TKIP 2
+#define WPA_CIPHER_AES_OCB 3
+#define WPA_CIPHER_AES_CCM 4
+#define WPA_CIPHER_WEP_104 5
+
+#define IS_WPA_CIPHER(cipher) ((cipher) == WPA_CIPHER_NONE || \
+ (cipher) == WPA_CIPHER_WEP_40 || \
+ (cipher) == WPA_CIPHER_WEP_104 || \
+ (cipher) == WPA_CIPHER_TKIP || \
+ (cipher) == WPA_CIPHER_AES_OCB || \
+ (cipher) == WPA_CIPHER_AES_CCM)
+
+
+#define WPA_TKIP_CM_DETECT 60
+#define WPA_TKIP_CM_BLOCK 60
+
+
+#define RSN_CAP_LEN 2
+
+
+#define RSN_CAP_PREAUTH 0x0001
+#define RSN_CAP_NOPAIRWISE 0x0002
+#define RSN_CAP_PTK_REPLAY_CNTR_MASK 0x000C
+#define RSN_CAP_PTK_REPLAY_CNTR_SHIFT 2
+#define RSN_CAP_GTK_REPLAY_CNTR_MASK 0x0030
+#define RSN_CAP_GTK_REPLAY_CNTR_SHIFT 4
+#define RSN_CAP_1_REPLAY_CNTR 0
+#define RSN_CAP_2_REPLAY_CNTRS 1
+#define RSN_CAP_4_REPLAY_CNTRS 2
+#define RSN_CAP_16_REPLAY_CNTRS 3
+
+
+#define WPA_CAP_4_REPLAY_CNTRS RSN_CAP_4_REPLAY_CNTRS
+#define WPA_CAP_16_REPLAY_CNTRS RSN_CAP_16_REPLAY_CNTRS
+#define WPA_CAP_REPLAY_CNTR_SHIFT RSN_CAP_PTK_REPLAY_CNTR_SHIFT
+#define WPA_CAP_REPLAY_CNTR_MASK RSN_CAP_PTK_REPLAY_CNTR_MASK
+
+
+#define WPA_CAP_LEN RSN_CAP_LEN
+
+#define WPA_CAP_WPA2_PREAUTH RSN_CAP_PREAUTH
+
+
+
+#include <packed_section_end.h>
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/sbchipc.h b/drivers/net/wireless/bcm4329/include/sbchipc.h
new file mode 100644
index 0000000..39e5c8d
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/sbchipc.h
@@ -0,0 +1,1026 @@
+/*
+ * SiliconBackplane Chipcommon core hardware definitions.
+ *
+ * The chipcommon core provides chip identification, SB control,
+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
+ * gpio interface, extbus, and support for serial and parallel flashes.
+ *
+ * $Id: sbchipc.h,v 13.103.2.5.4.5.2.9 2009/07/03 14:23:21 Exp $
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ */
+
+
+#ifndef _SBCHIPC_H
+#define _SBCHIPC_H
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+
+#ifndef PAD
+#define _PADLINE(line) pad ## line
+#define _XSTR(line) _PADLINE(line)
+#define PAD _XSTR(__LINE__)
+#endif
+
+typedef volatile struct {
+ uint32 chipid;
+ uint32 capabilities;
+ uint32 corecontrol;
+ uint32 bist;
+
+
+ uint32 otpstatus;
+ uint32 otpcontrol;
+ uint32 otpprog;
+ uint32 PAD;
+
+
+ uint32 intstatus;
+ uint32 intmask;
+ uint32 chipcontrol;
+ uint32 chipstatus;
+
+
+ uint32 jtagcmd;
+ uint32 jtagir;
+ uint32 jtagdr;
+ uint32 jtagctrl;
+
+
+ uint32 flashcontrol;
+ uint32 flashaddress;
+ uint32 flashdata;
+ uint32 PAD[1];
+
+
+ uint32 broadcastaddress;
+ uint32 broadcastdata;
+
+
+ uint32 gpiopullup;
+ uint32 gpiopulldown;
+ uint32 gpioin;
+ uint32 gpioout;
+ uint32 gpioouten;
+ uint32 gpiocontrol;
+ uint32 gpiointpolarity;
+ uint32 gpiointmask;
+
+
+ uint32 gpioevent;
+ uint32 gpioeventintmask;
+
+
+ uint32 watchdog;
+
+
+ uint32 gpioeventintpolarity;
+
+
+ uint32 gpiotimerval;
+ uint32 gpiotimeroutmask;
+
+
+ uint32 clockcontrol_n;
+ uint32 clockcontrol_sb;
+ uint32 clockcontrol_pci;
+ uint32 clockcontrol_m2;
+ uint32 clockcontrol_m3;
+ uint32 clkdiv;
+ uint32 PAD[2];
+
+
+ uint32 pll_on_delay;
+ uint32 fref_sel_delay;
+ uint32 slow_clk_ctl;
+ uint32 PAD[1];
+
+
+ uint32 system_clk_ctl;
+ uint32 clkstatestretch;
+ uint32 PAD[13];
+
+
+ uint32 eromptr;
+
+
+ uint32 pcmcia_config;
+ uint32 pcmcia_memwait;
+ uint32 pcmcia_attrwait;
+ uint32 pcmcia_iowait;
+ uint32 ide_config;
+ uint32 ide_memwait;
+ uint32 ide_attrwait;
+ uint32 ide_iowait;
+ uint32 prog_config;
+ uint32 prog_waitcount;
+ uint32 flash_config;
+ uint32 flash_waitcount;
+ uint32 PAD[4];
+ uint32 PAD[40];
+
+
+
+ uint32 clk_ctl_st;
+ uint32 hw_war;
+ uint32 PAD[70];
+
+
+ uint8 uart0data;
+ uint8 uart0imr;
+ uint8 uart0fcr;
+ uint8 uart0lcr;
+ uint8 uart0mcr;
+ uint8 uart0lsr;
+ uint8 uart0msr;
+ uint8 uart0scratch;
+ uint8 PAD[248];
+
+ uint8 uart1data;
+ uint8 uart1imr;
+ uint8 uart1fcr;
+ uint8 uart1lcr;
+ uint8 uart1mcr;
+ uint8 uart1lsr;
+ uint8 uart1msr;
+ uint8 uart1scratch;
+ uint32 PAD[126];
+
+
+ uint32 pmucontrol;
+ uint32 pmucapabilities;
+ uint32 pmustatus;
+ uint32 res_state;
+ uint32 res_pending;
+ uint32 pmutimer;
+ uint32 min_res_mask;
+ uint32 max_res_mask;
+ uint32 res_table_sel;
+ uint32 res_dep_mask;
+ uint32 res_updn_timer;
+ uint32 res_timer;
+ uint32 clkstretch;
+ uint32 pmuwatchdog;
+ uint32 gpiosel;
+ uint32 gpioenable;
+ uint32 res_req_timer_sel;
+ uint32 res_req_timer;
+ uint32 res_req_mask;
+ uint32 PAD;
+ uint32 chipcontrol_addr;
+ uint32 chipcontrol_data;
+ uint32 regcontrol_addr;
+ uint32 regcontrol_data;
+ uint32 pllcontrol_addr;
+ uint32 pllcontrol_data;
+ uint32 PAD[102];
+ uint16 otp[768];
+} chipcregs_t;
+
+#endif
+
+#define CC_CHIPID 0
+#define CC_CAPABILITIES 4
+#define CC_OTPST 0x10
+#define CC_CHIPST 0x2c
+#define CC_JTAGCMD 0x30
+#define CC_JTAGIR 0x34
+#define CC_JTAGDR 0x38
+#define CC_JTAGCTRL 0x3c
+#define CC_WATCHDOG 0x80
+#define CC_CLKC_N 0x90
+#define CC_CLKC_M0 0x94
+#define CC_CLKC_M1 0x98
+#define CC_CLKC_M2 0x9c
+#define CC_CLKC_M3 0xa0
+#define CC_CLKDIV 0xa4
+#define CC_SYS_CLK_CTL 0xc0
+#define CC_CLK_CTL_ST SI_CLK_CTL_ST
+#define CC_EROMPTR 0xfc
+#define PMU_CTL 0x600
+#define PMU_CAP 0x604
+#define PMU_ST 0x608
+#define PMU_RES_STATE 0x60c
+#define PMU_TIMER 0x614
+#define PMU_MIN_RES_MASK 0x618
+#define PMU_MAX_RES_MASK 0x61c
+#define PMU_REG_CONTROL_ADDR 0x658
+#define PMU_REG_CONTROL_DATA 0x65C
+#define PMU_PLL_CONTROL_ADDR 0x660
+#define PMU_PLL_CONTROL_DATA 0x664
+#define CC_OTP 0x800
+
+
+#define CID_ID_MASK 0x0000ffff
+#define CID_REV_MASK 0x000f0000
+#define CID_REV_SHIFT 16
+#define CID_PKG_MASK 0x00f00000
+#define CID_PKG_SHIFT 20
+#define CID_CC_MASK 0x0f000000
+#define CID_CC_SHIFT 24
+#define CID_TYPE_MASK 0xf0000000
+#define CID_TYPE_SHIFT 28
+
+
+#define CC_CAP_UARTS_MASK 0x00000003
+#define CC_CAP_MIPSEB 0x00000004
+#define CC_CAP_UCLKSEL 0x00000018
+#define CC_CAP_UINTCLK 0x00000008
+#define CC_CAP_UARTGPIO 0x00000020
+#define CC_CAP_EXTBUS_MASK 0x000000c0
+#define CC_CAP_EXTBUS_NONE 0x00000000
+#define CC_CAP_EXTBUS_FULL 0x00000040
+#define CC_CAP_EXTBUS_PROG 0x00000080
+#define CC_CAP_FLASH_MASK 0x00000700
+#define CC_CAP_PLL_MASK 0x00038000
+#define CC_CAP_PWR_CTL 0x00040000
+#define CC_CAP_OTPSIZE 0x00380000
+#define CC_CAP_OTPSIZE_SHIFT 19
+#define CC_CAP_OTPSIZE_BASE 5
+#define CC_CAP_JTAGP 0x00400000
+#define CC_CAP_ROM 0x00800000
+#define CC_CAP_BKPLN64 0x08000000
+#define CC_CAP_PMU 0x10000000
+#define CC_CAP_ECI 0x20000000
+
+
+#define PLL_NONE 0x00000000
+#define PLL_TYPE1 0x00010000
+#define PLL_TYPE2 0x00020000
+#define PLL_TYPE3 0x00030000
+#define PLL_TYPE4 0x00008000
+#define PLL_TYPE5 0x00018000
+#define PLL_TYPE6 0x00028000
+#define PLL_TYPE7 0x00038000
+
+
+#define ILP_CLOCK 32000
+
+
+#define ALP_CLOCK 20000000
+
+
+#define HT_CLOCK 80000000
+
+
+#define CC_UARTCLKO 0x00000001
+#define CC_SE 0x00000002
+#define CC_UARTCLKEN 0x00000008
+
+
+#define CHIPCTRL_4321A0_DEFAULT 0x3a4
+#define CHIPCTRL_4321A1_DEFAULT 0x0a4
+#define CHIPCTRL_4321_PLL_DOWN 0x800000
+
+
+#define OTPS_OL_MASK 0x000000ff
+#define OTPS_OL_MFG 0x00000001
+#define OTPS_OL_OR1 0x00000002
+#define OTPS_OL_OR2 0x00000004
+#define OTPS_OL_GU 0x00000008
+#define OTPS_GUP_MASK 0x00000f00
+#define OTPS_GUP_SHIFT 8
+#define OTPS_GUP_HW 0x00000100
+#define OTPS_GUP_SW 0x00000200
+#define OTPS_GUP_CI 0x00000400
+#define OTPS_GUP_FUSE 0x00000800
+#define OTPS_READY 0x00001000
+#define OTPS_RV(x) (1 << (16 + (x)))
+#define OTPS_RV_MASK 0x0fff0000
+
+
+#define OTPC_PROGSEL 0x00000001
+#define OTPC_PCOUNT_MASK 0x0000000e
+#define OTPC_PCOUNT_SHIFT 1
+#define OTPC_VSEL_MASK 0x000000f0
+#define OTPC_VSEL_SHIFT 4
+#define OTPC_TMM_MASK 0x00000700
+#define OTPC_TMM_SHIFT 8
+#define OTPC_ODM 0x00000800
+#define OTPC_PROGEN 0x80000000
+
+
+#define OTPP_COL_MASK 0x000000ff
+#define OTPP_COL_SHIFT 0
+#define OTPP_ROW_MASK 0x0000ff00
+#define OTPP_ROW_SHIFT 8
+#define OTPP_OC_MASK 0x0f000000
+#define OTPP_OC_SHIFT 24
+#define OTPP_READERR 0x10000000
+#define OTPP_VALUE_MASK 0x20000000
+#define OTPP_VALUE_SHIFT 29
+#define OTPP_START_BUSY 0x80000000
+
+
+#define OTPPOC_READ 0
+#define OTPPOC_BIT_PROG 1
+#define OTPPOC_VERIFY 3
+#define OTPPOC_INIT 4
+#define OTPPOC_SET 5
+#define OTPPOC_RESET 6
+#define OTPPOC_OCST 7
+#define OTPPOC_ROW_LOCK 8
+#define OTPPOC_PRESCN_TEST 9
+
+
+#define JCMD_START 0x80000000
+#define JCMD_BUSY 0x80000000
+#define JCMD_STATE_MASK 0x60000000
+#define JCMD_STATE_TLR 0x00000000
+#define JCMD_STATE_PIR 0x20000000
+#define JCMD_STATE_PDR 0x40000000
+#define JCMD_STATE_RTI 0x60000000
+#define JCMD0_ACC_MASK 0x0000f000
+#define JCMD0_ACC_IRDR 0x00000000
+#define JCMD0_ACC_DR 0x00001000
+#define JCMD0_ACC_IR 0x00002000
+#define JCMD0_ACC_RESET 0x00003000
+#define JCMD0_ACC_IRPDR 0x00004000
+#define JCMD0_ACC_PDR 0x00005000
+#define JCMD0_IRW_MASK 0x00000f00
+#define JCMD_ACC_MASK 0x000f0000
+#define JCMD_ACC_IRDR 0x00000000
+#define JCMD_ACC_DR 0x00010000
+#define JCMD_ACC_IR 0x00020000
+#define JCMD_ACC_RESET 0x00030000
+#define JCMD_ACC_IRPDR 0x00040000
+#define JCMD_ACC_PDR 0x00050000
+#define JCMD_ACC_PIR 0x00060000
+#define JCMD_ACC_IRDR_I 0x00070000
+#define JCMD_ACC_DR_I 0x00080000
+#define JCMD_IRW_MASK 0x00001f00
+#define JCMD_IRW_SHIFT 8
+#define JCMD_DRW_MASK 0x0000003f
+
+
+#define JCTRL_FORCE_CLK 4
+#define JCTRL_EXT_EN 2
+#define JCTRL_EN 1
+
+
+#define CLKD_SFLASH 0x0f000000
+#define CLKD_SFLASH_SHIFT 24
+#define CLKD_OTP 0x000f0000
+#define CLKD_OTP_SHIFT 16
+#define CLKD_JTAG 0x00000f00
+#define CLKD_JTAG_SHIFT 8
+#define CLKD_UART 0x000000ff
+
+
+#define CI_GPIO 0x00000001
+#define CI_EI 0x00000002
+#define CI_TEMP 0x00000004
+#define CI_SIRQ 0x00000008
+#define CI_ECI 0x00000010
+#define CI_PMU 0x00000020
+#define CI_UART 0x00000040
+#define CI_WDRESET 0x80000000
+
+
+#define SCC_SS_MASK 0x00000007
+#define SCC_SS_LPO 0x00000000
+#define SCC_SS_XTAL 0x00000001
+#define SCC_SS_PCI 0x00000002
+#define SCC_LF 0x00000200
+#define SCC_LP 0x00000400
+#define SCC_FS 0x00000800
+#define SCC_IP 0x00001000
+#define SCC_XC 0x00002000
+#define SCC_XP 0x00004000
+#define SCC_CD_MASK 0xffff0000
+#define SCC_CD_SHIFT 16
+
+
+#define SYCC_IE 0x00000001
+#define SYCC_AE 0x00000002
+#define SYCC_FP 0x00000004
+#define SYCC_AR 0x00000008
+#define SYCC_HR 0x00000010
+#define SYCC_CD_MASK 0xffff0000
+#define SYCC_CD_SHIFT 16
+
+
+#define CF_EN 0x00000001
+#define CF_EM_MASK 0x0000000e
+#define CF_EM_SHIFT 1
+#define CF_EM_FLASH 0
+#define CF_EM_SYNC 2
+#define CF_EM_PCMCIA 4
+#define CF_DS 0x00000010
+#define CF_BS 0x00000020
+#define CF_CD_MASK 0x000000c0
+#define CF_CD_SHIFT 6
+#define CF_CD_DIV2 0x00000000
+#define CF_CD_DIV3 0x00000040
+#define CF_CD_DIV4 0x00000080
+#define CF_CE 0x00000100
+#define CF_SB 0x00000200
+
+
+#define PM_W0_MASK 0x0000003f
+#define PM_W1_MASK 0x00001f00
+#define PM_W1_SHIFT 8
+#define PM_W2_MASK 0x001f0000
+#define PM_W2_SHIFT 16
+#define PM_W3_MASK 0x1f000000
+#define PM_W3_SHIFT 24
+
+
+#define PA_W0_MASK 0x0000003f
+#define PA_W1_MASK 0x00001f00
+#define PA_W1_SHIFT 8
+#define PA_W2_MASK 0x001f0000
+#define PA_W2_SHIFT 16
+#define PA_W3_MASK 0x1f000000
+#define PA_W3_SHIFT 24
+
+
+#define PI_W0_MASK 0x0000003f
+#define PI_W1_MASK 0x00001f00
+#define PI_W1_SHIFT 8
+#define PI_W2_MASK 0x001f0000
+#define PI_W2_SHIFT 16
+#define PI_W3_MASK 0x1f000000
+#define PI_W3_SHIFT 24
+
+
+#define PW_W0_MASK 0x0000001f
+#define PW_W1_MASK 0x00001f00
+#define PW_W1_SHIFT 8
+#define PW_W2_MASK 0x001f0000
+#define PW_W2_SHIFT 16
+#define PW_W3_MASK 0x1f000000
+#define PW_W3_SHIFT 24
+
+#define PW_W0 0x0000000c
+#define PW_W1 0x00000a00
+#define PW_W2 0x00020000
+#define PW_W3 0x01000000
+
+
+#define FW_W0_MASK 0x0000003f
+#define FW_W1_MASK 0x00001f00
+#define FW_W1_SHIFT 8
+#define FW_W2_MASK 0x001f0000
+#define FW_W2_SHIFT 16
+#define FW_W3_MASK 0x1f000000
+#define FW_W3_SHIFT 24
+
+
+#define WATCHDOG_CLOCK 48000000
+#define WATCHDOG_CLOCK_5354 32000
+
+
+#define PCTL_ILP_DIV_MASK 0xffff0000
+#define PCTL_ILP_DIV_SHIFT 16
+#define PCTL_PLL_PLLCTL_UPD 0x00000400
+#define PCTL_NOILP_ON_WAIT 0x00000200
+#define PCTL_HT_REQ_EN 0x00000100
+#define PCTL_ALP_REQ_EN 0x00000080
+#define PCTL_XTALFREQ_MASK 0x0000007c
+#define PCTL_XTALFREQ_SHIFT 2
+#define PCTL_ILP_DIV_EN 0x00000002
+#define PCTL_LPO_SEL 0x00000001
+
+
+#define CSTRETCH_HT 0xffff0000
+#define CSTRETCH_ALP 0x0000ffff
+
+
+#define GPIO_ONTIME_SHIFT 16
+
+
+#define CN_N1_MASK 0x3f
+#define CN_N2_MASK 0x3f00
+#define CN_N2_SHIFT 8
+#define CN_PLLC_MASK 0xf0000
+#define CN_PLLC_SHIFT 16
+
+
+#define CC_M1_MASK 0x3f
+#define CC_M2_MASK 0x3f00
+#define CC_M2_SHIFT 8
+#define CC_M3_MASK 0x3f0000
+#define CC_M3_SHIFT 16
+#define CC_MC_MASK 0x1f000000
+#define CC_MC_SHIFT 24
+
+
+#define CC_F6_2 0x02
+#define CC_F6_3 0x03
+#define CC_F6_4 0x05
+#define CC_F6_5 0x09
+#define CC_F6_6 0x11
+#define CC_F6_7 0x21
+
+#define CC_F5_BIAS 5
+
+#define CC_MC_BYPASS 0x08
+#define CC_MC_M1 0x04
+#define CC_MC_M1M2 0x02
+#define CC_MC_M1M2M3 0x01
+#define CC_MC_M1M3 0x11
+
+
+#define CC_T2_BIAS 2
+#define CC_T2M2_BIAS 3
+
+#define CC_T2MC_M1BYP 1
+#define CC_T2MC_M2BYP 2
+#define CC_T2MC_M3BYP 4
+
+
+#define CC_T6_MMASK 1
+#define CC_T6_M0 120000000
+#define CC_T6_M1 100000000
+#define SB2MIPS_T6(sb) (2 * (sb))
+
+
+#define CC_CLOCK_BASE1 24000000
+#define CC_CLOCK_BASE2 12500000
+
+
+#define CLKC_5350_N 0x0311
+#define CLKC_5350_M 0x04020009
+
+
+#define FLASH_NONE 0x000
+#define SFLASH_ST 0x100
+#define SFLASH_AT 0x200
+#define PFLASH 0x700
+
+
+#define CC_CFG_EN 0x0001
+#define CC_CFG_EM_MASK 0x000e
+#define CC_CFG_EM_ASYNC 0x0000
+#define CC_CFG_EM_SYNC 0x0002
+#define CC_CFG_EM_PCMCIA 0x0004
+#define CC_CFG_EM_IDE 0x0006
+#define CC_CFG_DS 0x0010
+#define CC_CFG_CD_MASK 0x00e0
+#define CC_CFG_CE 0x0100
+#define CC_CFG_SB 0x0200
+#define CC_CFG_IS 0x0400
+
+
+#define CC_EB_BASE 0x1a000000
+#define CC_EB_PCMCIA_MEM 0x1a000000
+#define CC_EB_PCMCIA_IO 0x1a200000
+#define CC_EB_PCMCIA_CFG 0x1a400000
+#define CC_EB_IDE 0x1a800000
+#define CC_EB_PCMCIA1_MEM 0x1a800000
+#define CC_EB_PCMCIA1_IO 0x1aa00000
+#define CC_EB_PCMCIA1_CFG 0x1ac00000
+#define CC_EB_PROGIF 0x1b000000
+
+
+
+#define SFLASH_OPCODE 0x000000ff
+#define SFLASH_ACTION 0x00000700
+#define SFLASH_CS_ACTIVE 0x00001000
+#define SFLASH_START 0x80000000
+#define SFLASH_BUSY SFLASH_START
+
+
+#define SFLASH_ACT_OPONLY 0x0000
+#define SFLASH_ACT_OP1D 0x0100
+#define SFLASH_ACT_OP3A 0x0200
+#define SFLASH_ACT_OP3A1D 0x0300
+#define SFLASH_ACT_OP3A4D 0x0400
+#define SFLASH_ACT_OP3A4X4D 0x0500
+#define SFLASH_ACT_OP3A1X4D 0x0700
+
+
+#define SFLASH_ST_WREN 0x0006
+#define SFLASH_ST_WRDIS 0x0004
+#define SFLASH_ST_RDSR 0x0105
+#define SFLASH_ST_WRSR 0x0101
+#define SFLASH_ST_READ 0x0303
+#define SFLASH_ST_PP 0x0302
+#define SFLASH_ST_SE 0x02d8
+#define SFLASH_ST_BE 0x00c7
+#define SFLASH_ST_DP 0x00b9
+#define SFLASH_ST_RES 0x03ab
+#define SFLASH_ST_CSA 0x1000
+
+
+#define SFLASH_ST_WIP 0x01
+#define SFLASH_ST_WEL 0x02
+#define SFLASH_ST_BP_MASK 0x1c
+#define SFLASH_ST_BP_SHIFT 2
+#define SFLASH_ST_SRWD 0x80
+
+
+#define SFLASH_AT_READ 0x07e8
+#define SFLASH_AT_PAGE_READ 0x07d2
+#define SFLASH_AT_BUF1_READ
+#define SFLASH_AT_BUF2_READ
+#define SFLASH_AT_STATUS 0x01d7
+#define SFLASH_AT_BUF1_WRITE 0x0384
+#define SFLASH_AT_BUF2_WRITE 0x0387
+#define SFLASH_AT_BUF1_ERASE_PROGRAM 0x0283
+#define SFLASH_AT_BUF2_ERASE_PROGRAM 0x0286
+#define SFLASH_AT_BUF1_PROGRAM 0x0288
+#define SFLASH_AT_BUF2_PROGRAM 0x0289
+#define SFLASH_AT_PAGE_ERASE 0x0281
+#define SFLASH_AT_BLOCK_ERASE 0x0250
+#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM 0x0382
+#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM 0x0385
+#define SFLASH_AT_BUF1_LOAD 0x0253
+#define SFLASH_AT_BUF2_LOAD 0x0255
+#define SFLASH_AT_BUF1_COMPARE 0x0260
+#define SFLASH_AT_BUF2_COMPARE 0x0261
+#define SFLASH_AT_BUF1_REPROGRAM 0x0258
+#define SFLASH_AT_BUF2_REPROGRAM 0x0259
+
+
+#define SFLASH_AT_READY 0x80
+#define SFLASH_AT_MISMATCH 0x40
+#define SFLASH_AT_ID_MASK 0x38
+#define SFLASH_AT_ID_SHIFT 3
+
+
+
+#define UART_RX 0
+#define UART_TX 0
+#define UART_DLL 0
+#define UART_IER 1
+#define UART_DLM 1
+#define UART_IIR 2
+#define UART_FCR 2
+#define UART_LCR 3
+#define UART_MCR 4
+#define UART_LSR 5
+#define UART_MSR 6
+#define UART_SCR 7
+#define UART_LCR_DLAB 0x80
+#define UART_LCR_WLEN8 0x03
+#define UART_MCR_OUT2 0x08
+#define UART_MCR_LOOP 0x10
+#define UART_LSR_RX_FIFO 0x80
+#define UART_LSR_TDHR 0x40
+#define UART_LSR_THRE 0x20
+#define UART_LSR_BREAK 0x10
+#define UART_LSR_FRAMING 0x08
+#define UART_LSR_PARITY 0x04
+#define UART_LSR_OVERRUN 0x02
+#define UART_LSR_RXRDY 0x01
+#define UART_FCR_FIFO_ENABLE 1
+
+
+#define UART_IIR_FIFO_MASK 0xc0
+#define UART_IIR_INT_MASK 0xf
+#define UART_IIR_MDM_CHG 0x0
+#define UART_IIR_NOINT 0x1
+#define UART_IIR_THRE 0x2
+#define UART_IIR_RCVD_DATA 0x4
+#define UART_IIR_RCVR_STATUS 0x6
+#define UART_IIR_CHAR_TIME 0xc
+
+
+#define UART_IER_EDSSI 8
+#define UART_IER_ELSI 4
+#define UART_IER_ETBEI 2
+#define UART_IER_ERBFI 1
+
+
+#define PST_INTPEND 0x0040
+#define PST_SBCLKST 0x0030
+#define PST_SBCLKST_ILP 0x0010
+#define PST_SBCLKST_ALP 0x0020
+#define PST_SBCLKST_HT 0x0030
+#define PST_ALPAVAIL 0x0008
+#define PST_HTAVAIL 0x0004
+#define PST_RESINIT 0x0003
+
+
+#define PCAP_REV_MASK 0x000000ff
+#define PCAP_RC_MASK 0x00001f00
+#define PCAP_RC_SHIFT 8
+#define PCAP_TC_MASK 0x0001e000
+#define PCAP_TC_SHIFT 13
+#define PCAP_PC_MASK 0x001e0000
+#define PCAP_PC_SHIFT 17
+#define PCAP_VC_MASK 0x01e00000
+#define PCAP_VC_SHIFT 21
+#define PCAP_CC_MASK 0x1e000000
+#define PCAP_CC_SHIFT 25
+#define PCAP5_PC_MASK 0x003e0000
+#define PCAP5_PC_SHIFT 17
+#define PCAP5_VC_MASK 0x07c00000
+#define PCAP5_VC_SHIFT 22
+#define PCAP5_CC_MASK 0xf8000000
+#define PCAP5_CC_SHIFT 27
+
+
+
+#define PRRT_TIME_MASK 0x03ff
+#define PRRT_INTEN 0x0400
+#define PRRT_REQ_ACTIVE 0x0800
+#define PRRT_ALP_REQ 0x1000
+#define PRRT_HT_REQ 0x2000
+
+
+#define PMURES_BIT(bit) (1 << (bit))
+
+
+#define PMURES_MAX_RESNUM 30
+
+
+
+
+#define PMU0_PLL0_PLLCTL0 0
+#define PMU0_PLL0_PC0_PDIV_MASK 1
+#define PMU0_PLL0_PC0_PDIV_FREQ 25000
+#define PMU0_PLL0_PC0_DIV_ARM_MASK 0x00000038
+#define PMU0_PLL0_PC0_DIV_ARM_SHIFT 3
+#define PMU0_PLL0_PC0_DIV_ARM_BASE 8
+
+
+#define PMU0_PLL0_PC0_DIV_ARM_110MHZ 0
+#define PMU0_PLL0_PC0_DIV_ARM_97_7MHZ 1
+#define PMU0_PLL0_PC0_DIV_ARM_88MHZ 2
+#define PMU0_PLL0_PC0_DIV_ARM_80MHZ 3
+#define PMU0_PLL0_PC0_DIV_ARM_73_3MHZ 4
+#define PMU0_PLL0_PC0_DIV_ARM_67_7MHZ 5
+#define PMU0_PLL0_PC0_DIV_ARM_62_9MHZ 6
+#define PMU0_PLL0_PC0_DIV_ARM_58_6MHZ 7
+
+
+#define PMU0_PLL0_PLLCTL1 1
+#define PMU0_PLL0_PC1_WILD_INT_MASK 0xf0000000
+#define PMU0_PLL0_PC1_WILD_INT_SHIFT 28
+#define PMU0_PLL0_PC1_WILD_FRAC_MASK 0x0fffff00
+#define PMU0_PLL0_PC1_WILD_FRAC_SHIFT 8
+#define PMU0_PLL0_PC1_STOP_MOD 0x00000040
+
+
+#define PMU0_PLL0_PLLCTL2 2
+#define PMU0_PLL0_PC2_WILD_INT_MASK 0xf
+#define PMU0_PLL0_PC2_WILD_INT_SHIFT 4
+
+
+#define RES4328_EXT_SWITCHER_PWM 0
+#define RES4328_BB_SWITCHER_PWM 1
+#define RES4328_BB_SWITCHER_BURST 2
+#define RES4328_BB_EXT_SWITCHER_BURST 3
+#define RES4328_ILP_REQUEST 4
+#define RES4328_RADIO_SWITCHER_PWM 5
+#define RES4328_RADIO_SWITCHER_BURST 6
+#define RES4328_ROM_SWITCH 7
+#define RES4328_PA_REF_LDO 8
+#define RES4328_RADIO_LDO 9
+#define RES4328_AFE_LDO 10
+#define RES4328_PLL_LDO 11
+#define RES4328_BG_FILTBYP 12
+#define RES4328_TX_FILTBYP 13
+#define RES4328_RX_FILTBYP 14
+#define RES4328_XTAL_PU 15
+#define RES4328_XTAL_EN 16
+#define RES4328_BB_PLL_FILTBYP 17
+#define RES4328_RF_PLL_FILTBYP 18
+#define RES4328_BB_PLL_PU 19
+
+#define RES5354_EXT_SWITCHER_PWM 0
+#define RES5354_BB_SWITCHER_PWM 1
+#define RES5354_BB_SWITCHER_BURST 2
+#define RES5354_BB_EXT_SWITCHER_BURST 3
+#define RES5354_ILP_REQUEST 4
+#define RES5354_RADIO_SWITCHER_PWM 5
+#define RES5354_RADIO_SWITCHER_BURST 6
+#define RES5354_ROM_SWITCH 7
+#define RES5354_PA_REF_LDO 8
+#define RES5354_RADIO_LDO 9
+#define RES5354_AFE_LDO 10
+#define RES5354_PLL_LDO 11
+#define RES5354_BG_FILTBYP 12
+#define RES5354_TX_FILTBYP 13
+#define RES5354_RX_FILTBYP 14
+#define RES5354_XTAL_PU 15
+#define RES5354_XTAL_EN 16
+#define RES5354_BB_PLL_FILTBYP 17
+#define RES5354_RF_PLL_FILTBYP 18
+#define RES5354_BB_PLL_PU 19
+
+
+
+#define DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT 8
+#define DOT11MAC_880MHZ_CLK_DIVISOR_MASK (0xFF << DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT)
+#define DOT11MAC_880MHZ_CLK_DIVISOR_VAL (0xE << DOT11MAC_880MHZ_CLK_DIVISOR_SHIFT)
+
+
+#define PMU2_PHY_PLL_PLLCTL 4
+#define PMU2_SI_PLL_PLLCTL 10
+
+
+#define RES4325_BUCK_BOOST_BURST 0
+#define RES4325_CBUCK_BURST 1
+#define RES4325_CBUCK_PWM 2
+#define RES4325_CLDO_CBUCK_BURST 3
+#define RES4325_CLDO_CBUCK_PWM 4
+#define RES4325_BUCK_BOOST_PWM 5
+#define RES4325_ILP_REQUEST 6
+#define RES4325_ABUCK_BURST 7
+#define RES4325_ABUCK_PWM 8
+#define RES4325_LNLDO1_PU 9
+#define RES4325_OTP_PU 10
+#define RES4325_LNLDO3_PU 11
+#define RES4325_LNLDO4_PU 12
+#define RES4325_XTAL_PU 13
+#define RES4325_ALP_AVAIL 14
+#define RES4325_RX_PWRSW_PU 15
+#define RES4325_TX_PWRSW_PU 16
+#define RES4325_RFPLL_PWRSW_PU 17
+#define RES4325_LOGEN_PWRSW_PU 18
+#define RES4325_AFE_PWRSW_PU 19
+#define RES4325_BBPLL_PWRSW_PU 20
+#define RES4325_HT_AVAIL 21
+
+
+#define RES4325B0_CBUCK_LPOM 1
+#define RES4325B0_CBUCK_BURST 2
+#define RES4325B0_CBUCK_PWM 3
+#define RES4325B0_CLDO_PU 4
+
+
+#define RES4325C1_OTP_PWRSW_PU 10
+#define RES4325C1_LNLDO2_PU 12
+
+
+#define CST4325_SPROM_OTP_SEL_MASK 0x00000003
+#define CST4325_DEFCIS_SEL 0
+#define CST4325_SPROM_SEL 1
+#define CST4325_OTP_SEL 2
+#define CST4325_OTP_PWRDN 3
+#define CST4325_SDIO_USB_MODE_MASK 0x00000004
+#define CST4325_SDIO_USB_MODE_SHIFT 2
+#define CST4325_RCAL_VALID_MASK 0x00000008
+#define CST4325_RCAL_VALID_SHIFT 3
+#define CST4325_RCAL_VALUE_MASK 0x000001f0
+#define CST4325_RCAL_VALUE_SHIFT 4
+#define CST4325_PMUTOP_2B_MASK 0x00000200
+#define CST4325_PMUTOP_2B_SHIFT 9
+
+#define RES4329_RESERVED0 0
+#define RES4329_CBUCK_LPOM 1
+#define RES4329_CBUCK_BURST 2
+#define RES4329_CBUCK_PWM 3
+#define RES4329_CLDO_PU 4
+#define RES4329_PALDO_PU 5
+#define RES4329_ILP_REQUEST 6
+#define RES4329_RESERVED7 7
+#define RES4329_RESERVED8 8
+#define RES4329_LNLDO1_PU 9
+#define RES4329_OTP_PU 10
+#define RES4329_RESERVED11 11
+#define RES4329_LNLDO2_PU 12
+#define RES4329_XTAL_PU 13
+#define RES4329_ALP_AVAIL 14
+#define RES4329_RX_PWRSW_PU 15
+#define RES4329_TX_PWRSW_PU 16
+#define RES4329_RFPLL_PWRSW_PU 17
+#define RES4329_LOGEN_PWRSW_PU 18
+#define RES4329_AFE_PWRSW_PU 19
+#define RES4329_BBPLL_PWRSW_PU 20
+#define RES4329_HT_AVAIL 21
+
+#define CST4329_SPROM_OTP_SEL_MASK 0x00000003
+#define CST4329_DEFCIS_SEL 0
+#define CST4329_SPROM_SEL 1
+#define CST4329_OTP_SEL 2
+#define CST4329_OTP_PWRDN 3
+#define CST4329_SPI_SDIO_MODE_MASK 0x00000004
+#define CST4329_SPI_SDIO_MODE_SHIFT 2
+
+
+#define RES4312_SWITCHER_BURST 0
+#define RES4312_SWITCHER_PWM 1
+#define RES4312_PA_REF_LDO 2
+#define RES4312_CORE_LDO_BURST 3
+#define RES4312_CORE_LDO_PWM 4
+#define RES4312_RADIO_LDO 5
+#define RES4312_ILP_REQUEST 6
+#define RES4312_BG_FILTBYP 7
+#define RES4312_TX_FILTBYP 8
+#define RES4312_RX_FILTBYP 9
+#define RES4312_XTAL_PU 10
+#define RES4312_ALP_AVAIL 11
+#define RES4312_BB_PLL_FILTBYP 12
+#define RES4312_RF_PLL_FILTBYP 13
+#define RES4312_HT_AVAIL 14
+
+#define RES4322_RF_LDO 0
+#define RES4322_ILP_REQUEST 1
+#define RES4322_XTAL_PU 2
+#define RES4322_ALP_AVAIL 3
+#define RES4322_SI_PLL_ON 4
+#define RES4322_HT_SI_AVAIL 5
+#define RES4322_PHY_PLL_ON 6
+#define RES4322_HT_PHY_AVAIL 7
+#define RES4322_OTP_PU 8
+
+
+#define CST4322_XTAL_FREQ_20_40MHZ 0x00000020
+#define CST4322_SPROM_OTP_SEL_MASK 0x000000c0
+#define CST4322_SPROM_OTP_SEL_SHIFT 6
+#define CST4322_NO_SPROM_OTP 0
+#define CST4322_SPROM_PRESENT 1
+#define CST4322_OTP_PRESENT 2
+#define CST4322_PCI_OR_USB 0x00000100
+#define CST4322_BOOT_MASK 0x00000600
+#define CST4322_BOOT_SHIFT 9
+#define CST4322_BOOT_FROM_SRAM 0
+#define CST4322_BOOT_FROM_ROM 1
+#define CST4322_BOOT_FROM_FLASH 2
+#define CST4322_BOOT_FROM_INVALID 3
+#define CST4322_ILP_DIV_EN 0x00000800
+#define CST4322_FLASH_TYPE_MASK 0x00001000
+#define CST4322_FLASH_TYPE_SHIFT 12
+#define CST4322_FLASH_TYPE_SHIFT_ST 0
+#define CST4322_FLASH_TYPE_SHIFT_ATMEL 1
+#define CST4322_ARM_TAP_SEL 0x00002000
+#define CST4322_RES_INIT_MODE_MASK 0x0000c000
+#define CST4322_RES_INIT_MODE_SHIFT 14
+#define CST4322_RES_INIT_MODE_ILPAVAIL 0
+#define CST4322_RES_INIT_MODE_ILPREQ 1
+#define CST4322_RES_INIT_MODE_ALPAVAIL 2
+#define CST4322_RES_INIT_MODE_HTAVAIL 3
+#define CST4322_PCIPLLCLK_GATING 0x00010000
+#define CST4322_CLK_SWITCH_PCI_TO_ALP 0x00020000
+#define CST4322_PCI_CARDBUS_MODE 0x00040000
+
+#define RES4315_CBUCK_LPOM 1
+#define RES4315_CBUCK_BURST 2
+#define RES4315_CBUCK_PWM 3
+#define RES4315_CLDO_PU 4
+#define RES4315_PALDO_PU 5
+#define RES4315_ILP_REQUEST 6
+#define RES4315_LNLDO1_PU 9
+#define RES4315_OTP_PU 10
+#define RES4315_LNLDO2_PU 12
+#define RES4315_XTAL_PU 13
+#define RES4315_ALP_AVAIL 14
+#define RES4315_RX_PWRSW_PU 15
+#define RES4315_TX_PWRSW_PU 16
+#define RES4315_RFPLL_PWRSW_PU 17
+#define RES4315_LOGEN_PWRSW_PU 18
+#define RES4315_AFE_PWRSW_PU 19
+#define RES4315_BBPLL_PWRSW_PU 20
+#define RES4315_HT_AVAIL 21
+
+#define CST4315_SPROM_OTP_SEL_MASK 0x00000003
+#define CST4315_DEFCIS_SEL 0x00000000
+#define CST4315_SPROM_SEL 0x00000001
+#define CST4315_OTP_SEL 0x00000002
+#define CST4315_OTP_PWRDN 0x00000003
+#define CST4315_SDIO_MODE 0x00000004
+#define CST4315_RCAL_VALID 0x00000008
+#define CST4315_RCAL_VALUE_MASK 0x000001f0
+#define CST4315_RCAL_VALUE_SHIFT 4
+#define CST4315_PALDO_EXTPNP 0x00000200
+#define CST4315_CBUCK_MODE_MASK 0x00000c00
+#define CST4315_CBUCK_MODE_BURST 0x00000400
+#define CST4315_CBUCK_MODE_LPBURST 0x00000c00
+
+#define PMU_MAX_TRANSITION_DLY 15000
+
+
+#define PMURES_UP_TRANSITION 2
+
+
+
+
+
+#define ECI_BW_20 0x0
+#define ECI_BW_25 0x1
+#define ECI_BW_30 0x2
+#define ECI_BW_35 0x3
+#define ECI_BW_40 0x4
+#define ECI_BW_45 0x5
+#define ECI_BW_50 0x6
+#define ECI_BW_ALL 0x7
+
+
+#define WLAN_NUM_ANT1 TXANT_0
+#define WLAN_NUM_ANT2 TXANT_1
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/sbconfig.h b/drivers/net/wireless/bcm4329/include/sbconfig.h
new file mode 100644
index 0000000..da18ccb
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/sbconfig.h
@@ -0,0 +1,276 @@
+/*
+ * Broadcom SiliconBackplane hardware register definitions.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sbconfig.h,v 13.67.30.1 2008/05/07 20:17:27 Exp $
+ */
+
+
+#ifndef _SBCONFIG_H
+#define _SBCONFIG_H
+
+
+#ifndef PAD
+#define _PADLINE(line) pad ## line
+#define _XSTR(line) _PADLINE(line)
+#define PAD _XSTR(__LINE__)
+#endif
+
+
+#define SB_BUS_SIZE 0x10000
+#define SB_BUS_BASE(b) (SI_ENUM_BASE + (b) * SB_BUS_SIZE)
+#define SB_BUS_MAXCORES (SB_BUS_SIZE / SI_CORE_SIZE)
+
+
+#define SBCONFIGOFF 0xf00
+#define SBCONFIGSIZE 256
+
+#define SBIPSFLAG 0x08
+#define SBTPSFLAG 0x18
+#define SBTMERRLOGA 0x48
+#define SBTMERRLOG 0x50
+#define SBADMATCH3 0x60
+#define SBADMATCH2 0x68
+#define SBADMATCH1 0x70
+#define SBIMSTATE 0x90
+#define SBINTVEC 0x94
+#define SBTMSTATELOW 0x98
+#define SBTMSTATEHIGH 0x9c
+#define SBBWA0 0xa0
+#define SBIMCONFIGLOW 0xa8
+#define SBIMCONFIGHIGH 0xac
+#define SBADMATCH0 0xb0
+#define SBTMCONFIGLOW 0xb8
+#define SBTMCONFIGHIGH 0xbc
+#define SBBCONFIG 0xc0
+#define SBBSTATE 0xc8
+#define SBACTCNFG 0xd8
+#define SBFLAGST 0xe8
+#define SBIDLOW 0xf8
+#define SBIDHIGH 0xfc
+
+
+
+#define SBIMERRLOGA 0xea8
+#define SBIMERRLOG 0xeb0
+#define SBTMPORTCONNID0 0xed8
+#define SBTMPORTLOCK0 0xef8
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+typedef volatile struct _sbconfig {
+ uint32 PAD[2];
+ uint32 sbipsflag;
+ uint32 PAD[3];
+ uint32 sbtpsflag;
+ uint32 PAD[11];
+ uint32 sbtmerrloga;
+ uint32 PAD;
+ uint32 sbtmerrlog;
+ uint32 PAD[3];
+ uint32 sbadmatch3;
+ uint32 PAD;
+ uint32 sbadmatch2;
+ uint32 PAD;
+ uint32 sbadmatch1;
+ uint32 PAD[7];
+ uint32 sbimstate;
+ uint32 sbintvec;
+ uint32 sbtmstatelow;
+ uint32 sbtmstatehigh;
+ uint32 sbbwa0;
+ uint32 PAD;
+ uint32 sbimconfiglow;
+ uint32 sbimconfighigh;
+ uint32 sbadmatch0;
+ uint32 PAD;
+ uint32 sbtmconfiglow;
+ uint32 sbtmconfighigh;
+ uint32 sbbconfig;
+ uint32 PAD;
+ uint32 sbbstate;
+ uint32 PAD[3];
+ uint32 sbactcnfg;
+ uint32 PAD[3];
+ uint32 sbflagst;
+ uint32 PAD[3];
+ uint32 sbidlow;
+ uint32 sbidhigh;
+} sbconfig_t;
+
+#endif
+
+
+#define SBIPS_INT1_MASK 0x3f
+#define SBIPS_INT1_SHIFT 0
+#define SBIPS_INT2_MASK 0x3f00
+#define SBIPS_INT2_SHIFT 8
+#define SBIPS_INT3_MASK 0x3f0000
+#define SBIPS_INT3_SHIFT 16
+#define SBIPS_INT4_MASK 0x3f000000
+#define SBIPS_INT4_SHIFT 24
+
+
+#define SBTPS_NUM0_MASK 0x3f
+#define SBTPS_F0EN0 0x40
+
+
+#define SBTMEL_CM 0x00000007
+#define SBTMEL_CI 0x0000ff00
+#define SBTMEL_EC 0x0f000000
+#define SBTMEL_ME 0x80000000
+
+
+#define SBIM_PC 0xf
+#define SBIM_AP_MASK 0x30
+#define SBIM_AP_BOTH 0x00
+#define SBIM_AP_TS 0x10
+#define SBIM_AP_TK 0x20
+#define SBIM_AP_RSV 0x30
+#define SBIM_IBE 0x20000
+#define SBIM_TO 0x40000
+#define SBIM_BY 0x01800000
+#define SBIM_RJ 0x02000000
+
+
+#define SBTML_RESET 0x0001
+#define SBTML_REJ_MASK 0x0006
+#define SBTML_REJ 0x0002
+#define SBTML_TMPREJ 0x0004
+
+#define SBTML_SICF_SHIFT 16
+
+
+#define SBTMH_SERR 0x0001
+#define SBTMH_INT 0x0002
+#define SBTMH_BUSY 0x0004
+#define SBTMH_TO 0x0020
+
+#define SBTMH_SISF_SHIFT 16
+
+
+#define SBBWA_TAB0_MASK 0xffff
+#define SBBWA_TAB1_MASK 0xffff
+#define SBBWA_TAB1_SHIFT 16
+
+
+#define SBIMCL_STO_MASK 0x7
+#define SBIMCL_RTO_MASK 0x70
+#define SBIMCL_RTO_SHIFT 4
+#define SBIMCL_CID_MASK 0xff0000
+#define SBIMCL_CID_SHIFT 16
+
+
+#define SBIMCH_IEM_MASK 0xc
+#define SBIMCH_TEM_MASK 0x30
+#define SBIMCH_TEM_SHIFT 4
+#define SBIMCH_BEM_MASK 0xc0
+#define SBIMCH_BEM_SHIFT 6
+
+
+#define SBAM_TYPE_MASK 0x3
+#define SBAM_AD64 0x4
+#define SBAM_ADINT0_MASK 0xf8
+#define SBAM_ADINT0_SHIFT 3
+#define SBAM_ADINT1_MASK 0x1f8
+#define SBAM_ADINT1_SHIFT 3
+#define SBAM_ADINT2_MASK 0x1f8
+#define SBAM_ADINT2_SHIFT 3
+#define SBAM_ADEN 0x400
+#define SBAM_ADNEG 0x800
+#define SBAM_BASE0_MASK 0xffffff00
+#define SBAM_BASE0_SHIFT 8
+#define SBAM_BASE1_MASK 0xfffff000
+#define SBAM_BASE1_SHIFT 12
+#define SBAM_BASE2_MASK 0xffff0000
+#define SBAM_BASE2_SHIFT 16
+
+
+#define SBTMCL_CD_MASK 0xff
+#define SBTMCL_CO_MASK 0xf800
+#define SBTMCL_CO_SHIFT 11
+#define SBTMCL_IF_MASK 0xfc0000
+#define SBTMCL_IF_SHIFT 18
+#define SBTMCL_IM_MASK 0x3000000
+#define SBTMCL_IM_SHIFT 24
+
+
+#define SBTMCH_BM_MASK 0x3
+#define SBTMCH_RM_MASK 0x3
+#define SBTMCH_RM_SHIFT 2
+#define SBTMCH_SM_MASK 0x30
+#define SBTMCH_SM_SHIFT 4
+#define SBTMCH_EM_MASK 0x300
+#define SBTMCH_EM_SHIFT 8
+#define SBTMCH_IM_MASK 0xc00
+#define SBTMCH_IM_SHIFT 10
+
+
+#define SBBC_LAT_MASK 0x3
+#define SBBC_MAX0_MASK 0xf0000
+#define SBBC_MAX0_SHIFT 16
+#define SBBC_MAX1_MASK 0xf00000
+#define SBBC_MAX1_SHIFT 20
+
+
+#define SBBS_SRD 0x1
+#define SBBS_HRD 0x2
+
+
+#define SBIDL_CS_MASK 0x3
+#define SBIDL_AR_MASK 0x38
+#define SBIDL_AR_SHIFT 3
+#define SBIDL_SYNCH 0x40
+#define SBIDL_INIT 0x80
+#define SBIDL_MINLAT_MASK 0xf00
+#define SBIDL_MINLAT_SHIFT 8
+#define SBIDL_MAXLAT 0xf000
+#define SBIDL_MAXLAT_SHIFT 12
+#define SBIDL_FIRST 0x10000
+#define SBIDL_CW_MASK 0xc0000
+#define SBIDL_CW_SHIFT 18
+#define SBIDL_TP_MASK 0xf00000
+#define SBIDL_TP_SHIFT 20
+#define SBIDL_IP_MASK 0xf000000
+#define SBIDL_IP_SHIFT 24
+#define SBIDL_RV_MASK 0xf0000000
+#define SBIDL_RV_SHIFT 28
+#define SBIDL_RV_2_2 0x00000000
+#define SBIDL_RV_2_3 0x10000000
+
+
+#define SBIDH_RC_MASK 0x000f
+#define SBIDH_RCE_MASK 0x7000
+#define SBIDH_RCE_SHIFT 8
+#define SBCOREREV(sbidh) \
+ ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK))
+#define SBIDH_CC_MASK 0x8ff0
+#define SBIDH_CC_SHIFT 4
+#define SBIDH_VC_MASK 0xffff0000
+#define SBIDH_VC_SHIFT 16
+
+#define SB_COMMIT 0xfd8
+
+
+#define SB_VEND_BCM 0x4243
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/sbhnddma.h b/drivers/net/wireless/bcm4329/include/sbhnddma.h
new file mode 100644
index 0000000..7681395
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/sbhnddma.h
@@ -0,0 +1,294 @@
+/*
+ * Generic Broadcom Home Networking Division (HND) DMA engine HW interface
+ * This supports the following chips: BCM42xx, 44xx, 47xx .
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sbhnddma.h,v 13.11.250.5.16.1 2009/07/21 14:04:51 Exp $
+ */
+
+
+#ifndef _sbhnddma_h_
+#define _sbhnddma_h_
+
+
+
+
+
+
+
+typedef volatile struct {
+ uint32 control;
+ uint32 addr;
+ uint32 ptr;
+ uint32 status;
+} dma32regs_t;
+
+typedef volatile struct {
+ dma32regs_t xmt;
+ dma32regs_t rcv;
+} dma32regp_t;
+
+typedef volatile struct {
+ uint32 fifoaddr;
+ uint32 fifodatalow;
+ uint32 fifodatahigh;
+ uint32 pad;
+} dma32diag_t;
+
+
+typedef volatile struct {
+ uint32 ctrl;
+ uint32 addr;
+} dma32dd_t;
+
+
+#define D32RINGALIGN_BITS 12
+#define D32MAXRINGSZ (1 << D32RINGALIGN_BITS)
+#define D32RINGALIGN (1 << D32RINGALIGN_BITS)
+#define D32MAXDD (D32MAXRINGSZ / sizeof (dma32dd_t))
+
+
+#define XC_XE ((uint32)1 << 0)
+#define XC_SE ((uint32)1 << 1)
+#define XC_LE ((uint32)1 << 2)
+#define XC_FL ((uint32)1 << 4)
+#define XC_PD ((uint32)1 << 11)
+#define XC_AE ((uint32)3 << 16)
+#define XC_AE_SHIFT 16
+
+
+#define XP_LD_MASK 0xfff
+
+
+#define XS_CD_MASK 0x0fff
+#define XS_XS_MASK 0xf000
+#define XS_XS_SHIFT 12
+#define XS_XS_DISABLED 0x0000
+#define XS_XS_ACTIVE 0x1000
+#define XS_XS_IDLE 0x2000
+#define XS_XS_STOPPED 0x3000
+#define XS_XS_SUSP 0x4000
+#define XS_XE_MASK 0xf0000
+#define XS_XE_SHIFT 16
+#define XS_XE_NOERR 0x00000
+#define XS_XE_DPE 0x10000
+#define XS_XE_DFU 0x20000
+#define XS_XE_BEBR 0x30000
+#define XS_XE_BEDA 0x40000
+#define XS_AD_MASK 0xfff00000
+#define XS_AD_SHIFT 20
+
+
+#define RC_RE ((uint32)1 << 0)
+#define RC_RO_MASK 0xfe
+#define RC_RO_SHIFT 1
+#define RC_FM ((uint32)1 << 8)
+#define RC_SH ((uint32)1 << 9)
+#define RC_OC ((uint32)1 << 10)
+#define RC_PD ((uint32)1 << 11)
+#define RC_AE ((uint32)3 << 16)
+#define RC_AE_SHIFT 16
+
+
+#define RP_LD_MASK 0xfff
+
+
+#define RS_CD_MASK 0x0fff
+#define RS_RS_MASK 0xf000
+#define RS_RS_SHIFT 12
+#define RS_RS_DISABLED 0x0000
+#define RS_RS_ACTIVE 0x1000
+#define RS_RS_IDLE 0x2000
+#define RS_RS_STOPPED 0x3000
+#define RS_RE_MASK 0xf0000
+#define RS_RE_SHIFT 16
+#define RS_RE_NOERR 0x00000
+#define RS_RE_DPE 0x10000
+#define RS_RE_DFO 0x20000
+#define RS_RE_BEBW 0x30000
+#define RS_RE_BEDA 0x40000
+#define RS_AD_MASK 0xfff00000
+#define RS_AD_SHIFT 20
+
+
+#define FA_OFF_MASK 0xffff
+#define FA_SEL_MASK 0xf0000
+#define FA_SEL_SHIFT 16
+#define FA_SEL_XDD 0x00000
+#define FA_SEL_XDP 0x10000
+#define FA_SEL_RDD 0x40000
+#define FA_SEL_RDP 0x50000
+#define FA_SEL_XFD 0x80000
+#define FA_SEL_XFP 0x90000
+#define FA_SEL_RFD 0xc0000
+#define FA_SEL_RFP 0xd0000
+#define FA_SEL_RSD 0xe0000
+#define FA_SEL_RSP 0xf0000
+
+
+#define CTRL_BC_MASK 0x1fff
+#define CTRL_AE ((uint32)3 << 16)
+#define CTRL_AE_SHIFT 16
+#define CTRL_EOT ((uint32)1 << 28)
+#define CTRL_IOC ((uint32)1 << 29)
+#define CTRL_EOF ((uint32)1 << 30)
+#define CTRL_SOF ((uint32)1 << 31)
+
+
+#define CTRL_CORE_MASK 0x0ff00000
+
+
+
+
+typedef volatile struct {
+ uint32 control;
+ uint32 ptr;
+ uint32 addrlow;
+ uint32 addrhigh;
+ uint32 status0;
+ uint32 status1;
+} dma64regs_t;
+
+typedef volatile struct {
+ dma64regs_t tx;
+ dma64regs_t rx;
+} dma64regp_t;
+
+typedef volatile struct {
+ uint32 fifoaddr;
+ uint32 fifodatalow;
+ uint32 fifodatahigh;
+ uint32 pad;
+} dma64diag_t;
+
+
+typedef volatile struct {
+ uint32 ctrl1;
+ uint32 ctrl2;
+ uint32 addrlow;
+ uint32 addrhigh;
+} dma64dd_t;
+
+
+#define D64RINGALIGN_BITS 13
+#define D64MAXRINGSZ (1 << D64RINGALIGN_BITS)
+#define D64RINGALIGN (1 << D64RINGALIGN_BITS)
+#define D64MAXDD (D64MAXRINGSZ / sizeof (dma64dd_t))
+
+
+#define D64_XC_XE 0x00000001
+#define D64_XC_SE 0x00000002
+#define D64_XC_LE 0x00000004
+#define D64_XC_FL 0x00000010
+#define D64_XC_PD 0x00000800
+#define D64_XC_AE 0x00030000
+#define D64_XC_AE_SHIFT 16
+
+
+#define D64_XP_LD_MASK 0x00000fff
+
+
+#define D64_XS0_CD_MASK 0x00001fff
+#define D64_XS0_XS_MASK 0xf0000000
+#define D64_XS0_XS_SHIFT 28
+#define D64_XS0_XS_DISABLED 0x00000000
+#define D64_XS0_XS_ACTIVE 0x10000000
+#define D64_XS0_XS_IDLE 0x20000000
+#define D64_XS0_XS_STOPPED 0x30000000
+#define D64_XS0_XS_SUSP 0x40000000
+
+#define D64_XS1_AD_MASK 0x0001ffff
+#define D64_XS1_XE_MASK 0xf0000000
+#define D64_XS1_XE_SHIFT 28
+#define D64_XS1_XE_NOERR 0x00000000
+#define D64_XS1_XE_DPE 0x10000000
+#define D64_XS1_XE_DFU 0x20000000
+#define D64_XS1_XE_DTE 0x30000000
+#define D64_XS1_XE_DESRE 0x40000000
+#define D64_XS1_XE_COREE 0x50000000
+
+
+#define D64_RC_RE 0x00000001
+#define D64_RC_RO_MASK 0x000000fe
+#define D64_RC_RO_SHIFT 1
+#define D64_RC_FM 0x00000100
+#define D64_RC_SH 0x00000200
+#define D64_RC_OC 0x00000400
+#define D64_RC_PD 0x00000800
+#define D64_RC_AE 0x00030000
+#define D64_RC_AE_SHIFT 16
+
+
+#define D64_RP_LD_MASK 0x00000fff
+
+
+#define D64_RS0_CD_MASK 0x00001fff
+#define D64_RS0_RS_MASK 0xf0000000
+#define D64_RS0_RS_SHIFT 28
+#define D64_RS0_RS_DISABLED 0x00000000
+#define D64_RS0_RS_ACTIVE 0x10000000
+#define D64_RS0_RS_IDLE 0x20000000
+#define D64_RS0_RS_STOPPED 0x30000000
+#define D64_RS0_RS_SUSP 0x40000000
+
+#define D64_RS1_AD_MASK 0x0001ffff
+#define D64_RS1_RE_MASK 0xf0000000
+#define D64_RS1_RE_SHIFT 28
+#define D64_RS1_RE_NOERR 0x00000000
+#define D64_RS1_RE_DPO 0x10000000
+#define D64_RS1_RE_DFU 0x20000000
+#define D64_RS1_RE_DTE 0x30000000
+#define D64_RS1_RE_DESRE 0x40000000
+#define D64_RS1_RE_COREE 0x50000000
+
+
+#define D64_FA_OFF_MASK 0xffff
+#define D64_FA_SEL_MASK 0xf0000
+#define D64_FA_SEL_SHIFT 16
+#define D64_FA_SEL_XDD 0x00000
+#define D64_FA_SEL_XDP 0x10000
+#define D64_FA_SEL_RDD 0x40000
+#define D64_FA_SEL_RDP 0x50000
+#define D64_FA_SEL_XFD 0x80000
+#define D64_FA_SEL_XFP 0x90000
+#define D64_FA_SEL_RFD 0xc0000
+#define D64_FA_SEL_RFP 0xd0000
+#define D64_FA_SEL_RSD 0xe0000
+#define D64_FA_SEL_RSP 0xf0000
+
+
+#define D64_CTRL1_EOT ((uint32)1 << 28)
+#define D64_CTRL1_IOC ((uint32)1 << 29)
+#define D64_CTRL1_EOF ((uint32)1 << 30)
+#define D64_CTRL1_SOF ((uint32)1 << 31)
+
+
+#define D64_CTRL2_BC_MASK 0x00007fff
+#define D64_CTRL2_AE 0x00030000
+#define D64_CTRL2_AE_SHIFT 16
+#define D64_CTRL2_PARITY 0x00040000
+
+
+#define D64_CTRL_CORE_MASK 0x0ff00000
+
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/sbpcmcia.h b/drivers/net/wireless/bcm4329/include/sbpcmcia.h
new file mode 100644
index 0000000..d6d8033
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/sbpcmcia.h
@@ -0,0 +1,109 @@
+/*
+ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sbpcmcia.h,v 13.31.4.1.2.3.8.7 2009/06/22 05:14:24 Exp $
+ */
+
+
+#ifndef _SBPCMCIA_H
+#define _SBPCMCIA_H
+
+
+
+
+#define PCMCIA_FCR (0x700 / 2)
+
+#define FCR0_OFF 0
+#define FCR1_OFF (0x40 / 2)
+#define FCR2_OFF (0x80 / 2)
+#define FCR3_OFF (0xc0 / 2)
+
+#define PCMCIA_FCR0 (0x700 / 2)
+#define PCMCIA_FCR1 (0x740 / 2)
+#define PCMCIA_FCR2 (0x780 / 2)
+#define PCMCIA_FCR3 (0x7c0 / 2)
+
+
+
+#define PCMCIA_COR 0
+
+#define COR_RST 0x80
+#define COR_LEV 0x40
+#define COR_IRQEN 0x04
+#define COR_BLREN 0x01
+#define COR_FUNEN 0x01
+
+
+#define PCICIA_FCSR (2 / 2)
+#define PCICIA_PRR (4 / 2)
+#define PCICIA_SCR (6 / 2)
+#define PCICIA_ESR (8 / 2)
+
+
+#define PCM_MEMOFF 0x0000
+#define F0_MEMOFF 0x1000
+#define F1_MEMOFF 0x2000
+#define F2_MEMOFF 0x3000
+#define F3_MEMOFF 0x4000
+
+
+#define MEM_ADDR0 (0x728 / 2)
+#define MEM_ADDR1 (0x72a / 2)
+#define MEM_ADDR2 (0x72c / 2)
+
+
+#define PCMCIA_ADDR0 (0x072e / 2)
+#define PCMCIA_ADDR1 (0x0730 / 2)
+#define PCMCIA_ADDR2 (0x0732 / 2)
+
+#define MEM_SEG (0x0734 / 2)
+#define SROM_CS (0x0736 / 2)
+#define SROM_DATAL (0x0738 / 2)
+#define SROM_DATAH (0x073a / 2)
+#define SROM_ADDRL (0x073c / 2)
+#define SROM_ADDRH (0x073e / 2)
+#define SROM_INFO2 (0x0772 / 2)
+#define SROM_INFO (0x07be / 2)
+
+
+#define SROM_IDLE 0
+#define SROM_WRITE 1
+#define SROM_READ 2
+#define SROM_WEN 4
+#define SROM_WDS 7
+#define SROM_DONE 8
+
+
+#define SRI_SZ_MASK 0x03
+#define SRI_BLANK 0x04
+#define SRI_OTP 0x80
+
+
+
+#define SBTML_INT_ACK 0x40000
+#define SBTML_INT_EN 0x20000
+
+
+#define SBTMH_INT_STATUS 0x40000
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/sbsdio.h b/drivers/net/wireless/bcm4329/include/sbsdio.h
new file mode 100644
index 0000000..75aaf4d
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/sbsdio.h
@@ -0,0 +1,166 @@
+/*
+ * SDIO device core hardware definitions.
+ * sdio is a portion of the pcmcia core in core rev 3 - rev 8
+ *
+ * SDIO core support 1bit, 4 bit SDIO mode as well as SPI mode.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sbsdio.h,v 13.29.4.1.22.3 2009/03/11 20:26:57 Exp $
+ */
+
+#ifndef _SBSDIO_H
+#define _SBSDIO_H
+
+#define SBSDIO_NUM_FUNCTION 3 /* as of sdiod rev 0, supports 3 functions */
+
+/* function 1 miscellaneous registers */
+#define SBSDIO_SPROM_CS 0x10000 /* sprom command and status */
+#define SBSDIO_SPROM_INFO 0x10001 /* sprom info register */
+#define SBSDIO_SPROM_DATA_LOW 0x10002 /* sprom indirect access data byte 0 */
+#define SBSDIO_SPROM_DATA_HIGH 0x10003 /* sprom indirect access data byte 1 */
+#define SBSDIO_SPROM_ADDR_LOW 0x10004 /* sprom indirect access addr byte 0 */
+#define SBSDIO_SPROM_ADDR_HIGH 0x10005 /* sprom indirect access addr byte 0 */
+#define SBSDIO_CHIP_CTRL_DATA 0x10006 /* xtal_pu (gpio) output */
+#define SBSDIO_CHIP_CTRL_EN 0x10007 /* xtal_pu (gpio) enable */
+#define SBSDIO_WATERMARK 0x10008 /* rev < 7, watermark for sdio device */
+#define SBSDIO_DEVICE_CTL 0x10009 /* control busy signal generation */
+
+/* registers introduced in rev 8, some content (mask/bits) defs in sbsdpcmdev.h */
+#define SBSDIO_FUNC1_SBADDRLOW 0x1000A /* SB Address Window Low (b15) */
+#define SBSDIO_FUNC1_SBADDRMID 0x1000B /* SB Address Window Mid (b23:b16) */
+#define SBSDIO_FUNC1_SBADDRHIGH 0x1000C /* SB Address Window High (b31:b24) */
+#define SBSDIO_FUNC1_FRAMECTRL 0x1000D /* Frame Control (frame term/abort) */
+#define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E /* ChipClockCSR (ALP/HT ctl/status) */
+#define SBSDIO_FUNC1_SDIOPULLUP 0x1000F /* SdioPullUp (on cmd, d0-d2) */
+#define SBSDIO_FUNC1_WFRAMEBCLO 0x10019 /* Write Frame Byte Count Low */
+#define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A /* Write Frame Byte Count High */
+#define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B /* Read Frame Byte Count Low */
+#define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C /* Read Frame Byte Count High */
+
+#define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */
+#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001C /* f1 misc register end */
+
+/* SBSDIO_SPROM_CS */
+#define SBSDIO_SPROM_IDLE 0
+#define SBSDIO_SPROM_WRITE 1
+#define SBSDIO_SPROM_READ 2
+#define SBSDIO_SPROM_WEN 4
+#define SBSDIO_SPROM_WDS 7
+#define SBSDIO_SPROM_DONE 8
+
+/* SBSDIO_SPROM_INFO */
+#define SROM_SZ_MASK 0x03 /* SROM size, 1: 4k, 2: 16k */
+#define SROM_BLANK 0x04 /* depreciated in corerev 6 */
+#define SROM_OTP 0x80 /* OTP present */
+
+/* SBSDIO_CHIP_CTRL */
+#define SBSDIO_CHIP_CTRL_XTAL 0x01 /* or'd with onchip xtal_pu,
+ * 1: power on oscillator
+ * (for 4318 only)
+ */
+/* SBSDIO_WATERMARK */
+#define SBSDIO_WATERMARK_MASK 0x7f /* number of words - 1 for sd device
+ * to wait before sending data to host
+ */
+
+/* SBSDIO_DEVICE_CTL */
+#define SBSDIO_DEVCTL_SETBUSY 0x01 /* 1: device will assert busy signal when
+ * receiving CMD53
+ */
+#define SBSDIO_DEVCTL_SPI_INTR_SYNC 0x02 /* 1: assertion of sdio interrupt is
+ * synchronous to the sdio clock
+ */
+#define SBSDIO_DEVCTL_CA_INT_ONLY 0x04 /* 1: mask all interrupts to host
+ * except the chipActive (rev 8)
+ */
+#define SBSDIO_DEVCTL_PADS_ISO 0x08 /* 1: isolate internal sdio signals, put
+ * external pads in tri-state; requires
+ * sdio bus power cycle to clear (rev 9)
+ */
+#define SBSDIO_DEVCTL_SB_RST_CTL 0x30 /* Force SD->SB reset mapping (rev 11) */
+#define SBSDIO_DEVCTL_RST_CORECTL 0x00 /* Determined by CoreControl bit */
+#define SBSDIO_DEVCTL_RST_BPRESET 0x10 /* Force backplane reset */
+#define SBSDIO_DEVCTL_RST_NOBPRESET 0x20 /* Force no backplane reset */
+
+
+/* SBSDIO_FUNC1_CHIPCLKCSR */
+#define SBSDIO_FORCE_ALP 0x01 /* Force ALP request to backplane */
+#define SBSDIO_FORCE_HT 0x02 /* Force HT request to backplane */
+#define SBSDIO_FORCE_ILP 0x04 /* Force ILP request to backplane */
+#define SBSDIO_ALP_AVAIL_REQ 0x08 /* Make ALP ready (power up xtal) */
+#define SBSDIO_HT_AVAIL_REQ 0x10 /* Make HT ready (power up PLL) */
+#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20 /* Squelch clock requests from HW */
+#define SBSDIO_ALP_AVAIL 0x40 /* Status: ALP is ready */
+#define SBSDIO_HT_AVAIL 0x80 /* Status: HT is ready */
+/* In rev8, actual avail bits followed original docs */
+#define SBSDIO_Rev8_HT_AVAIL 0x40
+#define SBSDIO_Rev8_ALP_AVAIL 0x80
+
+#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
+#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS)
+#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
+#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
+#define SBSDIO_CLKAV(regval, alponly) (SBSDIO_ALPAV(regval) && \
+ (alponly ? 1 : SBSDIO_HTAV(regval)))
+
+/* SBSDIO_FUNC1_SDIOPULLUP */
+#define SBSDIO_PULLUP_D0 0x01 /* Enable D0/MISO pullup */
+#define SBSDIO_PULLUP_D1 0x02 /* Enable D1/INT# pullup */
+#define SBSDIO_PULLUP_D2 0x04 /* Enable D2 pullup */
+#define SBSDIO_PULLUP_CMD 0x08 /* Enable CMD/MOSI pullup */
+#define SBSDIO_PULLUP_ALL 0x0f /* All valid bits */
+
+/* function 1 OCP space */
+#define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF /* sb offset addr is <= 15 bits, 32k */
+#define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000
+#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000 /* with b15, maps to 32-bit SB access */
+
+/* some duplication with sbsdpcmdev.h here */
+/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
+#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */
+#define SBSDIO_SBADDRMID_MASK 0xff /* Valid bits in SBADDRMID */
+#define SBSDIO_SBADDRHIGH_MASK 0xffU /* Valid bits in SBADDRHIGH */
+#define SBSDIO_SBWINDOW_MASK 0xffff8000 /* Address bits from SBADDR regs */
+
+/* direct(mapped) cis space */
+#define SBSDIO_CIS_BASE_COMMON 0x1000 /* MAPPED common CIS address */
+#define SBSDIO_CIS_SIZE_LIMIT 0x200 /* maximum bytes in one CIS */
+#define SBSDIO_OTP_CIS_SIZE_LIMIT 0x078 /* maximum bytes OTP CIS */
+
+#define SBSDIO_CIS_OFT_ADDR_MASK 0x1FFFF /* cis offset addr is < 17 bits */
+
+#define SBSDIO_CIS_MANFID_TUPLE_LEN 6 /* manfid tuple length, include tuple,
+ * link bytes
+ */
+
+/* indirect cis access (in sprom) */
+#define SBSDIO_SPROM_CIS_OFFSET 0x8 /* 8 control bytes first, CIS starts from
+ * 8th byte
+ */
+
+#define SBSDIO_BYTEMODE_DATALEN_MAX 64 /* sdio byte mode: maximum length of one
+ * data comamnd
+ */
+
+#define SBSDIO_CORE_ADDR_MASK 0x1FFFF /* sdio core function one address mask */
+
+#endif /* _SBSDIO_H */
diff --git a/drivers/net/wireless/bcm4329/include/sbsdpcmdev.h b/drivers/net/wireless/bcm4329/include/sbsdpcmdev.h
new file mode 100644
index 0000000..7c7c7e4
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/sbsdpcmdev.h
@@ -0,0 +1,288 @@
+/*
+ * Broadcom SiliconBackplane SDIO/PCMCIA hardware-specific device core support
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sbsdpcmdev.h,v 13.29.4.1.4.6.6.2 2008/12/31 21:16:51 Exp $
+ */
+
+#ifndef _sbsdpcmdev_h_
+#define _sbsdpcmdev_h_
+
+/* cpp contortions to concatenate w/arg prescan */
+#ifndef PAD
+#define _PADLINE(line) pad ## line
+#define _XSTR(line) _PADLINE(line)
+#define PAD _XSTR(__LINE__)
+#endif /* PAD */
+
+
+typedef volatile struct {
+ dma64regs_t xmt; /* dma tx */
+ uint32 PAD[2];
+ dma64regs_t rcv; /* dma rx */
+ uint32 PAD[2];
+} dma64p_t;
+
+/* dma64 sdiod corerev >= 1 */
+typedef volatile struct {
+ dma64p_t dma64regs[2];
+ dma64diag_t dmafifo; /* DMA Diagnostic Regs, 0x280-0x28c */
+ uint32 PAD[92];
+} sdiodma64_t;
+
+/* dma32 sdiod corerev == 0 */
+typedef volatile struct {
+ dma32regp_t dma32regs[2]; /* dma tx & rx, 0x200-0x23c */
+ dma32diag_t dmafifo; /* DMA Diagnostic Regs, 0x240-0x24c */
+ uint32 PAD[108];
+} sdiodma32_t;
+
+/* dma32 regs for pcmcia core */
+typedef volatile struct {
+ dma32regp_t dmaregs; /* DMA Regs, 0x200-0x21c, rev8 */
+ dma32diag_t dmafifo; /* DMA Diagnostic Regs, 0x220-0x22c */
+ uint32 PAD[116];
+} pcmdma32_t;
+
+/* core registers */
+typedef volatile struct {
+ uint32 corecontrol; /* CoreControl, 0x000, rev8 */
+ uint32 corestatus; /* CoreStatus, 0x004, rev8 */
+ uint32 PAD[1];
+ uint32 biststatus; /* BistStatus, 0x00c, rev8 */
+
+ /* PCMCIA access */
+ uint16 pcmciamesportaladdr; /* PcmciaMesPortalAddr, 0x010, rev8 */
+ uint16 PAD[1];
+ uint16 pcmciamesportalmask; /* PcmciaMesPortalMask, 0x014, rev8 */
+ uint16 PAD[1];
+ uint16 pcmciawrframebc; /* PcmciaWrFrameBC, 0x018, rev8 */
+ uint16 PAD[1];
+ uint16 pcmciaunderflowtimer; /* PcmciaUnderflowTimer, 0x01c, rev8 */
+ uint16 PAD[1];
+
+ /* interrupt */
+ uint32 intstatus; /* IntStatus, 0x020, rev8 */
+ uint32 hostintmask; /* IntHostMask, 0x024, rev8 */
+ uint32 intmask; /* IntSbMask, 0x028, rev8 */
+ uint32 sbintstatus; /* SBIntStatus, 0x02c, rev8 */
+ uint32 sbintmask; /* SBIntMask, 0x030, rev8 */
+ uint32 PAD[3];
+ uint32 tosbmailbox; /* ToSBMailbox, 0x040, rev8 */
+ uint32 tohostmailbox; /* ToHostMailbox, 0x044, rev8 */
+ uint32 tosbmailboxdata; /* ToSbMailboxData, 0x048, rev8 */
+ uint32 tohostmailboxdata; /* ToHostMailboxData, 0x04c, rev8 */
+
+ /* synchronized access to registers in SDIO clock domain */
+ uint32 sdioaccess; /* SdioAccess, 0x050, rev8 */
+ uint32 PAD[3];
+
+ /* PCMCIA frame control */
+ uint8 pcmciaframectrl; /* pcmciaFrameCtrl, 0x060, rev8 */
+ uint8 PAD[3];
+ uint8 pcmciawatermark; /* pcmciaWaterMark, 0x064, rev8 */
+ uint8 PAD[155];
+
+ /* interrupt batching control */
+ uint32 intrcvlazy; /* IntRcvLazy, 0x100, rev8 */
+ uint32 PAD[3];
+
+ /* counters */
+ uint32 cmd52rd; /* Cmd52RdCount, 0x110, rev8, SDIO: cmd52 reads */
+ uint32 cmd52wr; /* Cmd52WrCount, 0x114, rev8, SDIO: cmd52 writes */
+ uint32 cmd53rd; /* Cmd53RdCount, 0x118, rev8, SDIO: cmd53 reads */
+ uint32 cmd53wr; /* Cmd53WrCount, 0x11c, rev8, SDIO: cmd53 writes */
+ uint32 abort; /* AbortCount, 0x120, rev8, SDIO: aborts */
+ uint32 datacrcerror; /* DataCrcErrorCount, 0x124, rev8, SDIO: frames w/bad CRC */
+ uint32 rdoutofsync; /* RdOutOfSyncCount, 0x128, rev8, SDIO/PCMCIA: Rd Frm OOS */
+ uint32 wroutofsync; /* RdOutOfSyncCount, 0x12c, rev8, SDIO/PCMCIA: Wr Frm OOS */
+ uint32 writebusy; /* WriteBusyCount, 0x130, rev8, SDIO: dev asserted "busy" */
+ uint32 readwait; /* ReadWaitCount, 0x134, rev8, SDIO: read: no data avail */
+ uint32 readterm; /* ReadTermCount, 0x138, rev8, SDIO: rd frm terminates */
+ uint32 writeterm; /* WriteTermCount, 0x13c, rev8, SDIO: wr frm terminates */
+ uint32 PAD[40];
+ uint32 clockctlstatus; /* ClockCtlStatus, 0x1e0, rev8 */
+ uint32 PAD[7];
+
+ /* DMA engines */
+ volatile union {
+ pcmdma32_t pcm32;
+ sdiodma32_t sdiod32;
+ sdiodma64_t sdiod64;
+ } dma;
+
+ /* SDIO/PCMCIA CIS region */
+ char cis[512]; /* 512 byte CIS, 0x400-0x5ff, rev6 */
+
+ /* PCMCIA function control registers */
+ char pcmciafcr[256]; /* PCMCIA FCR, 0x600-6ff, rev6 */
+ uint16 PAD[55];
+
+ /* PCMCIA backplane access */
+ uint16 backplanecsr; /* BackplaneCSR, 0x76E, rev6 */
+ uint16 backplaneaddr0; /* BackplaneAddr0, 0x770, rev6 */
+ uint16 backplaneaddr1; /* BackplaneAddr1, 0x772, rev6 */
+ uint16 backplaneaddr2; /* BackplaneAddr2, 0x774, rev6 */
+ uint16 backplaneaddr3; /* BackplaneAddr3, 0x776, rev6 */
+ uint16 backplanedata0; /* BackplaneData0, 0x778, rev6 */
+ uint16 backplanedata1; /* BackplaneData1, 0x77a, rev6 */
+ uint16 backplanedata2; /* BackplaneData2, 0x77c, rev6 */
+ uint16 backplanedata3; /* BackplaneData3, 0x77e, rev6 */
+ uint16 PAD[31];
+
+ /* sprom "size" & "blank" info */
+ uint16 spromstatus; /* SPROMStatus, 0x7BE, rev2 */
+ uint32 PAD[464];
+
+ /* Sonics SiliconBackplane registers */
+ sbconfig_t sbconfig; /* SbConfig Regs, 0xf00-0xfff, rev8 */
+} sdpcmd_regs_t;
+
+/* corecontrol */
+#define CC_CISRDY (1 << 0) /* CIS Ready */
+#define CC_BPRESEN (1 << 1) /* CCCR RES signal causes backplane reset */
+#define CC_F2RDY (1 << 2) /* set CCCR IOR2 bit */
+#define CC_CLRPADSISO (1 << 3) /* clear SDIO pads isolation bit (rev 11) */
+
+/* corestatus */
+#define CS_PCMCIAMODE (1 << 0) /* Device Mode; 0=SDIO, 1=PCMCIA */
+#define CS_SMARTDEV (1 << 1) /* 1=smartDev enabled */
+#define CS_F2ENABLED (1 << 2) /* 1=host has enabled the device */
+
+#define PCMCIA_MES_PA_MASK 0x7fff /* PCMCIA Message Portal Address Mask */
+#define PCMCIA_MES_PM_MASK 0x7fff /* PCMCIA Message Portal Mask Mask */
+#define PCMCIA_WFBC_MASK 0xffff /* PCMCIA Write Frame Byte Count Mask */
+#define PCMCIA_UT_MASK 0x07ff /* PCMCIA Underflow Timer Mask */
+
+/* intstatus */
+#define I_SMB_SW0 (1 << 0) /* To SB Mail S/W interrupt 0 */
+#define I_SMB_SW1 (1 << 1) /* To SB Mail S/W interrupt 1 */
+#define I_SMB_SW2 (1 << 2) /* To SB Mail S/W interrupt 2 */
+#define I_SMB_SW3 (1 << 3) /* To SB Mail S/W interrupt 3 */
+#define I_SMB_SW_MASK 0x0000000f /* To SB Mail S/W interrupts mask */
+#define I_SMB_SW_SHIFT 0 /* To SB Mail S/W interrupts shift */
+#define I_HMB_SW0 (1 << 4) /* To Host Mail S/W interrupt 0 */
+#define I_HMB_SW1 (1 << 5) /* To Host Mail S/W interrupt 1 */
+#define I_HMB_SW2 (1 << 6) /* To Host Mail S/W interrupt 2 */
+#define I_HMB_SW3 (1 << 7) /* To Host Mail S/W interrupt 3 */
+#define I_HMB_SW_MASK 0x000000f0 /* To Host Mail S/W interrupts mask */
+#define I_HMB_SW_SHIFT 4 /* To Host Mail S/W interrupts shift */
+#define I_WR_OOSYNC (1 << 8) /* Write Frame Out Of Sync */
+#define I_RD_OOSYNC (1 << 9) /* Read Frame Out Of Sync */
+#define I_PC (1 << 10) /* descriptor error */
+#define I_PD (1 << 11) /* data error */
+#define I_DE (1 << 12) /* Descriptor protocol Error */
+#define I_RU (1 << 13) /* Receive descriptor Underflow */
+#define I_RO (1 << 14) /* Receive fifo Overflow */
+#define I_XU (1 << 15) /* Transmit fifo Underflow */
+#define I_RI (1 << 16) /* Receive Interrupt */
+#define I_BUSPWR (1 << 17) /* SDIO Bus Power Change (rev 9) */
+#define I_XI (1 << 24) /* Transmit Interrupt */
+#define I_RF_TERM (1 << 25) /* Read Frame Terminate */
+#define I_WF_TERM (1 << 26) /* Write Frame Terminate */
+#define I_PCMCIA_XU (1 << 27) /* PCMCIA Transmit FIFO Underflow */
+#define I_SBINT (1 << 28) /* sbintstatus Interrupt */
+#define I_CHIPACTIVE (1 << 29) /* chip transitioned from doze to active state */
+#define I_SRESET (1 << 30) /* CCCR RES interrupt */
+#define I_IOE2 (1U << 31) /* CCCR IOE2 Bit Changed */
+#define I_ERRORS (I_PC | I_PD | I_DE | I_RU | I_RO | I_XU) /* DMA Errors */
+#define I_DMA (I_RI | I_XI | I_ERRORS)
+
+/* sbintstatus */
+#define I_SB_SERR (1 << 8) /* Backplane SError (write) */
+#define I_SB_RESPERR (1 << 9) /* Backplane Response Error (read) */
+#define I_SB_SPROMERR (1 << 10) /* Error accessing the sprom */
+
+/* sdioaccess */
+#define SDA_DATA_MASK 0x000000ff /* Read/Write Data Mask */
+#define SDA_ADDR_MASK 0x000fff00 /* Read/Write Address Mask */
+#define SDA_ADDR_SHIFT 8 /* Read/Write Address Shift */
+#define SDA_WRITE 0x01000000 /* Write bit */
+#define SDA_READ 0x00000000 /* Write bit cleared for Read */
+#define SDA_BUSY 0x80000000 /* Busy bit */
+
+/* sdioaccess-accessible register address spaces */
+#define SDA_CCCR_SPACE 0x000 /* sdioAccess CCCR register space */
+#define SDA_F1_FBR_SPACE 0x100 /* sdioAccess F1 FBR register space */
+#define SDA_F2_FBR_SPACE 0x200 /* sdioAccess F2 FBR register space */
+#define SDA_F1_REG_SPACE 0x300 /* sdioAccess F1 core-specific register space */
+
+/* SDA_F1_REG_SPACE sdioaccess-accessible F1 reg space register offsets */
+#define SDA_CHIPCONTROLDATA 0x006 /* ChipControlData */
+#define SDA_CHIPCONTROLENAB 0x007 /* ChipControlEnable */
+#define SDA_F2WATERMARK 0x008 /* Function 2 Watermark */
+#define SDA_DEVICECONTROL 0x009 /* DeviceControl */
+#define SDA_SBADDRLOW 0x00a /* SbAddrLow */
+#define SDA_SBADDRMID 0x00b /* SbAddrMid */
+#define SDA_SBADDRHIGH 0x00c /* SbAddrHigh */
+#define SDA_FRAMECTRL 0x00d /* FrameCtrl */
+#define SDA_CHIPCLOCKCSR 0x00e /* ChipClockCSR */
+#define SDA_SDIOPULLUP 0x00f /* SdioPullUp */
+#define SDA_SDIOWRFRAMEBCLOW 0x019 /* SdioWrFrameBCLow */
+#define SDA_SDIOWRFRAMEBCHIGH 0x01a /* SdioWrFrameBCHigh */
+#define SDA_SDIORDFRAMEBCLOW 0x01b /* SdioRdFrameBCLow */
+#define SDA_SDIORDFRAMEBCHIGH 0x01c /* SdioRdFrameBCHigh */
+
+/* SDA_F2WATERMARK */
+#define SDA_F2WATERMARK_MASK 0x7f /* F2Watermark Mask */
+
+/* SDA_SBADDRLOW */
+#define SDA_SBADDRLOW_MASK 0x80 /* SbAddrLow Mask */
+
+/* SDA_SBADDRMID */
+#define SDA_SBADDRMID_MASK 0xff /* SbAddrMid Mask */
+
+/* SDA_SBADDRHIGH */
+#define SDA_SBADDRHIGH_MASK 0xff /* SbAddrHigh Mask */
+
+/* SDA_FRAMECTRL */
+#define SFC_RF_TERM (1 << 0) /* Read Frame Terminate */
+#define SFC_WF_TERM (1 << 1) /* Write Frame Terminate */
+#define SFC_CRC4WOOS (1 << 2) /* HW reports CRC error for write out of sync */
+#define SFC_ABORTALL (1 << 3) /* Abort cancels all in-progress frames */
+
+/* pcmciaframectrl */
+#define PFC_RF_TERM (1 << 0) /* Read Frame Terminate */
+#define PFC_WF_TERM (1 << 1) /* Write Frame Terminate */
+
+/* intrcvlazy */
+#define IRL_TO_MASK 0x00ffffff /* timeout */
+#define IRL_FC_MASK 0xff000000 /* frame count */
+#define IRL_FC_SHIFT 24 /* frame count */
+
+/* rx header */
+typedef volatile struct {
+ uint16 len;
+ uint16 flags;
+} sdpcmd_rxh_t;
+
+/* rx header flags */
+#define RXF_CRC 0x0001 /* CRC error detected */
+#define RXF_WOOS 0x0002 /* write frame out of sync */
+#define RXF_WF_TERM 0x0004 /* write frame terminated */
+#define RXF_ABORT 0x0008 /* write frame aborted */
+#define RXF_DISCARD (RXF_CRC | RXF_WOOS | RXF_WF_TERM | RXF_ABORT) /* bad frame */
+
+/* HW frame tag */
+#define SDPCM_FRAMETAG_LEN 4 /* HW frametag: 2 bytes len, 2 bytes check val */
+
+#endif /* _sbsdpcmdev_h_ */
diff --git a/drivers/net/wireless/bcm4329/include/sbsocram.h b/drivers/net/wireless/bcm4329/include/sbsocram.h
new file mode 100644
index 0000000..5ede0b6
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/sbsocram.h
@@ -0,0 +1,150 @@
+/*
+ * BCM47XX Sonics SiliconBackplane embedded ram core
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sbsocram.h,v 13.9.162.2 2008/12/12 14:13:27 Exp $
+ */
+
+
+#ifndef _SBSOCRAM_H
+#define _SBSOCRAM_H
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+
+#ifndef PAD
+#define _PADLINE(line) pad ## line
+#define _XSTR(line) _PADLINE(line)
+#define PAD _XSTR(__LINE__)
+#endif
+
+
+typedef volatile struct sbsocramregs {
+ uint32 coreinfo;
+ uint32 bwalloc;
+ uint32 extracoreinfo;
+ uint32 biststat;
+ uint32 bankidx;
+ uint32 standbyctrl;
+
+ uint32 errlogstatus;
+ uint32 errlogaddr;
+
+ uint32 cambankidx;
+ uint32 cambankstandbyctrl;
+ uint32 cambankpatchctrl;
+ uint32 cambankpatchtblbaseaddr;
+ uint32 cambankcmdreg;
+ uint32 cambankdatareg;
+ uint32 cambankmaskreg;
+ uint32 PAD[17];
+ uint32 extmemconfig;
+ uint32 extmemparitycsr;
+ uint32 extmemparityerrdata;
+ uint32 extmemparityerrcnt;
+ uint32 extmemwrctrlandsize;
+ uint32 PAD[84];
+ uint32 workaround;
+ uint32 pwrctl;
+} sbsocramregs_t;
+
+#endif
+
+
+#define SR_COREINFO 0x00
+#define SR_BWALLOC 0x04
+#define SR_BISTSTAT 0x0c
+#define SR_BANKINDEX 0x10
+#define SR_BANKSTBYCTL 0x14
+#define SR_PWRCTL 0x1e8
+
+
+#define SRCI_PT_MASK 0x00070000
+#define SRCI_PT_SHIFT 16
+
+#define SRCI_PT_OCP_OCP 0
+#define SRCI_PT_AXI_OCP 1
+#define SRCI_PT_ARM7AHB_OCP 2
+#define SRCI_PT_CM3AHB_OCP 3
+#define SRCI_PT_AXI_AXI 4
+#define SRCI_PT_AHB_AXI 5
+
+#define SRCI_LSS_MASK 0x00f00000
+#define SRCI_LSS_SHIFT 20
+#define SRCI_LRS_MASK 0x0f000000
+#define SRCI_LRS_SHIFT 24
+
+
+#define SRCI_MS0_MASK 0xf
+#define SR_MS0_BASE 16
+
+
+#define SRCI_ROMNB_MASK 0xf000
+#define SRCI_ROMNB_SHIFT 12
+#define SRCI_ROMBSZ_MASK 0xf00
+#define SRCI_ROMBSZ_SHIFT 8
+#define SRCI_SRNB_MASK 0xf0
+#define SRCI_SRNB_SHIFT 4
+#define SRCI_SRBSZ_MASK 0xf
+#define SRCI_SRBSZ_SHIFT 0
+
+#define SR_BSZ_BASE 14
+
+
+#define SRSC_SBYOVR_MASK 0x80000000
+#define SRSC_SBYOVR_SHIFT 31
+#define SRSC_SBYOVRVAL_MASK 0x60000000
+#define SRSC_SBYOVRVAL_SHIFT 29
+#define SRSC_SBYEN_MASK 0x01000000
+#define SRSC_SBYEN_SHIFT 24
+
+
+#define SRPC_PMU_STBYDIS_MASK 0x00000010
+#define SRPC_PMU_STBYDIS_SHIFT 4
+#define SRPC_STBYOVRVAL_MASK 0x00000008
+#define SRPC_STBYOVRVAL_SHIFT 3
+#define SRPC_STBYOVR_MASK 0x00000007
+#define SRPC_STBYOVR_SHIFT 0
+
+
+#define SRECC_NUM_BANKS_MASK 0x000000F0
+#define SRECC_NUM_BANKS_SHIFT 4
+#define SRECC_BANKSIZE_MASK 0x0000000F
+#define SRECC_BANKSIZE_SHIFT 0
+
+#define SRECC_BANKSIZE(value) (1 << (value))
+
+
+#define SRCBPC_PATCHENABLE 0x80000000
+
+#define SRP_ADDRESS 0x0001FFFC
+#define SRP_VALID 0x8000
+
+
+#define SRCMD_WRITE 0x00020000
+#define SRCMD_READ 0x00010000
+#define SRCMD_DONE 0x80000000
+
+#define SRCMD_DONE_DLY 1000
+
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/sdio.h b/drivers/net/wireless/bcm4329/include/sdio.h
new file mode 100644
index 0000000..280cb84
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/sdio.h
@@ -0,0 +1,566 @@
+/*
+ * SDIO spec header file
+ * Protocol and standard (common) device definitions
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sdio.h,v 13.24.4.1.4.1.16.1 2009/08/12 01:08:02 Exp $
+ */
+
+#ifndef _SDIO_H
+#define _SDIO_H
+
+
+/* CCCR structure for function 0 */
+typedef volatile struct {
+ uint8 cccr_sdio_rev; /* RO, cccr and sdio revision */
+ uint8 sd_rev; /* RO, sd spec revision */
+ uint8 io_en; /* I/O enable */
+ uint8 io_rdy; /* I/O ready reg */
+ uint8 intr_ctl; /* Master and per function interrupt enable control */
+ uint8 intr_status; /* RO, interrupt pending status */
+ uint8 io_abort; /* read/write abort or reset all functions */
+ uint8 bus_inter; /* bus interface control */
+ uint8 capability; /* RO, card capability */
+
+ uint8 cis_base_low; /* 0x9 RO, common CIS base address, LSB */
+ uint8 cis_base_mid;
+ uint8 cis_base_high; /* 0xB RO, common CIS base address, MSB */
+
+ /* suspend/resume registers */
+ uint8 bus_suspend; /* 0xC */
+ uint8 func_select; /* 0xD */
+ uint8 exec_flag; /* 0xE */
+ uint8 ready_flag; /* 0xF */
+
+ uint8 fn0_blk_size[2]; /* 0x10(LSB), 0x11(MSB) */
+
+ uint8 power_control; /* 0x12 (SDIO version 1.10) */
+
+ uint8 speed_control; /* 0x13 */
+} sdio_regs_t;
+
+/* SDIO Device CCCR offsets */
+#define SDIOD_CCCR_REV 0x00
+#define SDIOD_CCCR_SDREV 0x01
+#define SDIOD_CCCR_IOEN 0x02
+#define SDIOD_CCCR_IORDY 0x03
+#define SDIOD_CCCR_INTEN 0x04
+#define SDIOD_CCCR_INTPEND 0x05
+#define SDIOD_CCCR_IOABORT 0x06
+#define SDIOD_CCCR_BICTRL 0x07
+#define SDIOD_CCCR_CAPABLITIES 0x08
+#define SDIOD_CCCR_CISPTR_0 0x09
+#define SDIOD_CCCR_CISPTR_1 0x0A
+#define SDIOD_CCCR_CISPTR_2 0x0B
+#define SDIOD_CCCR_BUSSUSP 0x0C
+#define SDIOD_CCCR_FUNCSEL 0x0D
+#define SDIOD_CCCR_EXECFLAGS 0x0E
+#define SDIOD_CCCR_RDYFLAGS 0x0F
+#define SDIOD_CCCR_BLKSIZE_0 0x10
+#define SDIOD_CCCR_BLKSIZE_1 0x11
+#define SDIOD_CCCR_POWER_CONTROL 0x12
+#define SDIOD_CCCR_SPEED_CONTROL 0x13
+
+/* Broadcom extensions (corerev >= 1) */
+#define SDIOD_CCCR_BRCM_SEPINT 0xf2
+
+/* cccr_sdio_rev */
+#define SDIO_REV_SDIOID_MASK 0xf0 /* SDIO spec revision number */
+#define SDIO_REV_CCCRID_MASK 0x0f /* CCCR format version number */
+
+/* sd_rev */
+#define SD_REV_PHY_MASK 0x0f /* SD format version number */
+
+/* io_en */
+#define SDIO_FUNC_ENABLE_1 0x02 /* function 1 I/O enable */
+#define SDIO_FUNC_ENABLE_2 0x04 /* function 2 I/O enable */
+
+/* io_rdys */
+#define SDIO_FUNC_READY_1 0x02 /* function 1 I/O ready */
+#define SDIO_FUNC_READY_2 0x04 /* function 2 I/O ready */
+
+/* intr_ctl */
+#define INTR_CTL_MASTER_EN 0x1 /* interrupt enable master */
+#define INTR_CTL_FUNC1_EN 0x2 /* interrupt enable for function 1 */
+#define INTR_CTL_FUNC2_EN 0x4 /* interrupt enable for function 2 */
+
+/* intr_status */
+#define INTR_STATUS_FUNC1 0x2 /* interrupt pending for function 1 */
+#define INTR_STATUS_FUNC2 0x4 /* interrupt pending for function 2 */
+
+/* io_abort */
+#define IO_ABORT_RESET_ALL 0x08 /* I/O card reset */
+#define IO_ABORT_FUNC_MASK 0x07 /* abort selction: function x */
+
+/* bus_inter */
+#define BUS_CARD_DETECT_DIS 0x80 /* Card Detect disable */
+#define BUS_SPI_CONT_INTR_CAP 0x40 /* support continuous SPI interrupt */
+#define BUS_SPI_CONT_INTR_EN 0x20 /* continuous SPI interrupt enable */
+#define BUS_SD_DATA_WIDTH_MASK 0x03 /* bus width mask */
+#define BUS_SD_DATA_WIDTH_4BIT 0x02 /* bus width 4-bit mode */
+#define BUS_SD_DATA_WIDTH_1BIT 0x00 /* bus width 1-bit mode */
+
+/* capability */
+#define SDIO_CAP_4BLS 0x80 /* 4-bit support for low speed card */
+#define SDIO_CAP_LSC 0x40 /* low speed card */
+#define SDIO_CAP_E4MI 0x20 /* enable interrupt between block of data in 4-bit mode */
+#define SDIO_CAP_S4MI 0x10 /* support interrupt between block of data in 4-bit mode */
+#define SDIO_CAP_SBS 0x08 /* support suspend/resume */
+#define SDIO_CAP_SRW 0x04 /* support read wait */
+#define SDIO_CAP_SMB 0x02 /* support multi-block transfer */
+#define SDIO_CAP_SDC 0x01 /* Support Direct commands during multi-byte transfer */
+
+/* power_control */
+#define SDIO_POWER_SMPC 0x01 /* supports master power control (RO) */
+#define SDIO_POWER_EMPC 0x02 /* enable master power control (allow > 200mA) (RW) */
+
+/* speed_control (control device entry into high-speed clocking mode) */
+#define SDIO_SPEED_SHS 0x01 /* supports high-speed [clocking] mode (RO) */
+#define SDIO_SPEED_EHS 0x02 /* enable high-speed [clocking] mode (RW) */
+
+/* brcm sepint */
+#define SDIO_SEPINT_MASK 0x01 /* route sdpcmdev intr onto separate pad (chip-specific) */
+#define SDIO_SEPINT_OE 0x02 /* 1 asserts output enable for above pad */
+#define SDIO_SEPINT_ACT_HI 0x04 /* use active high interrupt level instead of active low */
+
+/* FBR structure for function 1-7, FBR addresses and register offsets */
+typedef volatile struct {
+ uint8 devctr; /* device interface, CSA control */
+ uint8 ext_dev; /* extended standard I/O device type code */
+ uint8 pwr_sel; /* power selection support */
+ uint8 PAD[6]; /* reserved */
+
+ uint8 cis_low; /* CIS LSB */
+ uint8 cis_mid;
+ uint8 cis_high; /* CIS MSB */
+ uint8 csa_low; /* code storage area, LSB */
+ uint8 csa_mid;
+ uint8 csa_high; /* code storage area, MSB */
+ uint8 csa_dat_win; /* data access window to function */
+
+ uint8 fnx_blk_size[2]; /* block size, little endian */
+} sdio_fbr_t;
+
+/* Maximum number of I/O funcs */
+#define SDIOD_MAX_IOFUNCS 7
+
+/* SDIO Device FBR Start Address */
+#define SDIOD_FBR_STARTADDR 0x100
+
+/* SDIO Device FBR Size */
+#define SDIOD_FBR_SIZE 0x100
+
+/* Macro to calculate FBR register base */
+#define SDIOD_FBR_BASE(n) ((n) * 0x100)
+
+/* Function register offsets */
+#define SDIOD_FBR_DEVCTR 0x00 /* basic info for function */
+#define SDIOD_FBR_EXT_DEV 0x01 /* extended I/O device code */
+#define SDIOD_FBR_PWR_SEL 0x02 /* power selection bits */
+
+/* SDIO Function CIS ptr offset */
+#define SDIOD_FBR_CISPTR_0 0x09
+#define SDIOD_FBR_CISPTR_1 0x0A
+#define SDIOD_FBR_CISPTR_2 0x0B
+
+/* Code Storage Area pointer */
+#define SDIOD_FBR_CSA_ADDR_0 0x0C
+#define SDIOD_FBR_CSA_ADDR_1 0x0D
+#define SDIOD_FBR_CSA_ADDR_2 0x0E
+#define SDIOD_FBR_CSA_DATA 0x0F
+
+/* SDIO Function I/O Block Size */
+#define SDIOD_FBR_BLKSIZE_0 0x10
+#define SDIOD_FBR_BLKSIZE_1 0x11
+
+/* devctr */
+#define SDIOD_FBR_DEVCTR_DIC 0x0f /* device interface code */
+#define SDIOD_FBR_DECVTR_CSA 0x40 /* CSA support flag */
+#define SDIOD_FBR_DEVCTR_CSA_EN 0x80 /* CSA enabled */
+/* interface codes */
+#define SDIOD_DIC_NONE 0 /* SDIO standard interface is not supported */
+#define SDIOD_DIC_UART 1
+#define SDIOD_DIC_BLUETOOTH_A 2
+#define SDIOD_DIC_BLUETOOTH_B 3
+#define SDIOD_DIC_GPS 4
+#define SDIOD_DIC_CAMERA 5
+#define SDIOD_DIC_PHS 6
+#define SDIOD_DIC_WLAN 7
+#define SDIOD_DIC_EXT 0xf /* extended device interface, read ext_dev register */
+
+/* pwr_sel */
+#define SDIOD_PWR_SEL_SPS 0x01 /* supports power selection */
+#define SDIOD_PWR_SEL_EPS 0x02 /* enable power selection (low-current mode) */
+
+/* misc defines */
+#define SDIO_FUNC_0 0
+#define SDIO_FUNC_1 1
+#define SDIO_FUNC_2 2
+#define SDIO_FUNC_3 3
+#define SDIO_FUNC_4 4
+#define SDIO_FUNC_5 5
+#define SDIO_FUNC_6 6
+#define SDIO_FUNC_7 7
+
+#define SD_CARD_TYPE_UNKNOWN 0 /* bad type or unrecognized */
+#define SD_CARD_TYPE_IO 1 /* IO only card */
+#define SD_CARD_TYPE_MEMORY 2 /* memory only card */
+#define SD_CARD_TYPE_COMBO 3 /* IO and memory combo card */
+
+#define SDIO_MAX_BLOCK_SIZE 2048 /* maximum block size for block mode operation */
+#define SDIO_MIN_BLOCK_SIZE 1 /* minimum block size for block mode operation */
+
+/* Card registers: status bit position */
+#define CARDREG_STATUS_BIT_OUTOFRANGE 31
+#define CARDREG_STATUS_BIT_COMCRCERROR 23
+#define CARDREG_STATUS_BIT_ILLEGALCOMMAND 22
+#define CARDREG_STATUS_BIT_ERROR 19
+#define CARDREG_STATUS_BIT_IOCURRENTSTATE3 12
+#define CARDREG_STATUS_BIT_IOCURRENTSTATE2 11
+#define CARDREG_STATUS_BIT_IOCURRENTSTATE1 10
+#define CARDREG_STATUS_BIT_IOCURRENTSTATE0 9
+#define CARDREG_STATUS_BIT_FUN_NUM_ERROR 4
+
+
+
+#define SD_CMD_GO_IDLE_STATE 0 /* mandatory for SDIO */
+#define SD_CMD_SEND_OPCOND 1
+#define SD_CMD_MMC_SET_RCA 3
+#define SD_CMD_IO_SEND_OP_COND 5 /* mandatory for SDIO */
+#define SD_CMD_SELECT_DESELECT_CARD 7
+#define SD_CMD_SEND_CSD 9
+#define SD_CMD_SEND_CID 10
+#define SD_CMD_STOP_TRANSMISSION 12
+#define SD_CMD_SEND_STATUS 13
+#define SD_CMD_GO_INACTIVE_STATE 15
+#define SD_CMD_SET_BLOCKLEN 16
+#define SD_CMD_READ_SINGLE_BLOCK 17
+#define SD_CMD_READ_MULTIPLE_BLOCK 18
+#define SD_CMD_WRITE_BLOCK 24
+#define SD_CMD_WRITE_MULTIPLE_BLOCK 25
+#define SD_CMD_PROGRAM_CSD 27
+#define SD_CMD_SET_WRITE_PROT 28
+#define SD_CMD_CLR_WRITE_PROT 29
+#define SD_CMD_SEND_WRITE_PROT 30
+#define SD_CMD_ERASE_WR_BLK_START 32
+#define SD_CMD_ERASE_WR_BLK_END 33
+#define SD_CMD_ERASE 38
+#define SD_CMD_LOCK_UNLOCK 42
+#define SD_CMD_IO_RW_DIRECT 52 /* mandatory for SDIO */
+#define SD_CMD_IO_RW_EXTENDED 53 /* mandatory for SDIO */
+#define SD_CMD_APP_CMD 55
+#define SD_CMD_GEN_CMD 56
+#define SD_CMD_READ_OCR 58
+#define SD_CMD_CRC_ON_OFF 59 /* mandatory for SDIO */
+#define SD_ACMD_SD_STATUS 13
+#define SD_ACMD_SEND_NUM_WR_BLOCKS 22
+#define SD_ACMD_SET_WR_BLOCK_ERASE_CNT 23
+#define SD_ACMD_SD_SEND_OP_COND 41
+#define SD_ACMD_SET_CLR_CARD_DETECT 42
+#define SD_ACMD_SEND_SCR 51
+
+/* argument for SD_CMD_IO_RW_DIRECT and SD_CMD_IO_RW_EXTENDED */
+#define SD_IO_OP_READ 0 /* Read_Write: Read */
+#define SD_IO_OP_WRITE 1 /* Read_Write: Write */
+#define SD_IO_RW_NORMAL 0 /* no RAW */
+#define SD_IO_RW_RAW 1 /* RAW */
+#define SD_IO_BYTE_MODE 0 /* Byte Mode */
+#define SD_IO_BLOCK_MODE 1 /* BlockMode */
+#define SD_IO_FIXED_ADDRESS 0 /* fix Address */
+#define SD_IO_INCREMENT_ADDRESS 1 /* IncrementAddress */
+
+/* build SD_CMD_IO_RW_DIRECT Argument */
+#define SDIO_IO_RW_DIRECT_ARG(rw, raw, func, addr, data) \
+ ((((rw) & 1) << 31) | (((func) & 0x7) << 28) | (((raw) & 1) << 27) | \
+ (((addr) & 0x1FFFF) << 9) | ((data) & 0xFF))
+
+/* build SD_CMD_IO_RW_EXTENDED Argument */
+#define SDIO_IO_RW_EXTENDED_ARG(rw, blk, func, addr, inc_addr, count) \
+ ((((rw) & 1) << 31) | (((func) & 0x7) << 28) | (((blk) & 1) << 27) | \
+ (((inc_addr) & 1) << 26) | (((addr) & 0x1FFFF) << 9) | ((count) & 0x1FF))
+
+/* SDIO response parameters */
+#define SD_RSP_NO_NONE 0
+#define SD_RSP_NO_1 1
+#define SD_RSP_NO_2 2
+#define SD_RSP_NO_3 3
+#define SD_RSP_NO_4 4
+#define SD_RSP_NO_5 5
+#define SD_RSP_NO_6 6
+
+ /* Modified R6 response (to CMD3) */
+#define SD_RSP_MR6_COM_CRC_ERROR 0x8000
+#define SD_RSP_MR6_ILLEGAL_COMMAND 0x4000
+#define SD_RSP_MR6_ERROR 0x2000
+
+ /* Modified R1 in R4 Response (to CMD5) */
+#define SD_RSP_MR1_SBIT 0x80
+#define SD_RSP_MR1_PARAMETER_ERROR 0x40
+#define SD_RSP_MR1_RFU5 0x20
+#define SD_RSP_MR1_FUNC_NUM_ERROR 0x10
+#define SD_RSP_MR1_COM_CRC_ERROR 0x08
+#define SD_RSP_MR1_ILLEGAL_COMMAND 0x04
+#define SD_RSP_MR1_RFU1 0x02
+#define SD_RSP_MR1_IDLE_STATE 0x01
+
+ /* R5 response (to CMD52 and CMD53) */
+#define SD_RSP_R5_COM_CRC_ERROR 0x80
+#define SD_RSP_R5_ILLEGAL_COMMAND 0x40
+#define SD_RSP_R5_IO_CURRENTSTATE1 0x20
+#define SD_RSP_R5_IO_CURRENTSTATE0 0x10
+#define SD_RSP_R5_ERROR 0x08
+#define SD_RSP_R5_RFU 0x04
+#define SD_RSP_R5_FUNC_NUM_ERROR 0x02
+#define SD_RSP_R5_OUT_OF_RANGE 0x01
+
+#define SD_RSP_R5_ERRBITS 0xCB
+
+
+/* ------------------------------------------------
+ * SDIO Commands and responses
+ *
+ * I/O only commands are:
+ * CMD0, CMD3, CMD5, CMD7, CMD15, CMD52, CMD53
+ * ------------------------------------------------
+ */
+
+/* SDIO Commands */
+#define SDIOH_CMD_0 0
+#define SDIOH_CMD_3 3
+#define SDIOH_CMD_5 5
+#define SDIOH_CMD_7 7
+#define SDIOH_CMD_15 15
+#define SDIOH_CMD_52 52
+#define SDIOH_CMD_53 53
+#define SDIOH_CMD_59 59
+
+/* SDIO Command Responses */
+#define SDIOH_RSP_NONE 0
+#define SDIOH_RSP_R1 1
+#define SDIOH_RSP_R2 2
+#define SDIOH_RSP_R3 3
+#define SDIOH_RSP_R4 4
+#define SDIOH_RSP_R5 5
+#define SDIOH_RSP_R6 6
+
+/*
+ * SDIO Response Error flags
+ */
+#define SDIOH_RSP5_ERROR_FLAGS 0xCB
+
+/* ------------------------------------------------
+ * SDIO Command structures. I/O only commands are:
+ *
+ * CMD0, CMD3, CMD5, CMD7, CMD15, CMD52, CMD53
+ * ------------------------------------------------
+ */
+
+#define CMD5_OCR_M BITFIELD_MASK(24)
+#define CMD5_OCR_S 0
+
+#define CMD7_RCA_M BITFIELD_MASK(16)
+#define CMD7_RCA_S 16
+
+#define CMD_15_RCA_M BITFIELD_MASK(16)
+#define CMD_15_RCA_S 16
+
+#define CMD52_DATA_M BITFIELD_MASK(8) /* Bits [7:0] - Write Data/Stuff bits of CMD52
+ */
+#define CMD52_DATA_S 0
+#define CMD52_REG_ADDR_M BITFIELD_MASK(17) /* Bits [25:9] - register address */
+#define CMD52_REG_ADDR_S 9
+#define CMD52_RAW_M BITFIELD_MASK(1) /* Bit 27 - Read after Write flag */
+#define CMD52_RAW_S 27
+#define CMD52_FUNCTION_M BITFIELD_MASK(3) /* Bits [30:28] - Function number */
+#define CMD52_FUNCTION_S 28
+#define CMD52_RW_FLAG_M BITFIELD_MASK(1) /* Bit 31 - R/W flag */
+#define CMD52_RW_FLAG_S 31
+
+
+#define CMD53_BYTE_BLK_CNT_M BITFIELD_MASK(9) /* Bits [8:0] - Byte/Block Count of CMD53 */
+#define CMD53_BYTE_BLK_CNT_S 0
+#define CMD53_REG_ADDR_M BITFIELD_MASK(17) /* Bits [25:9] - register address */
+#define CMD53_REG_ADDR_S 9
+#define CMD53_OP_CODE_M BITFIELD_MASK(1) /* Bit 26 - R/W Operation Code */
+#define CMD53_OP_CODE_S 26
+#define CMD53_BLK_MODE_M BITFIELD_MASK(1) /* Bit 27 - Block Mode */
+#define CMD53_BLK_MODE_S 27
+#define CMD53_FUNCTION_M BITFIELD_MASK(3) /* Bits [30:28] - Function number */
+#define CMD53_FUNCTION_S 28
+#define CMD53_RW_FLAG_M BITFIELD_MASK(1) /* Bit 31 - R/W flag */
+#define CMD53_RW_FLAG_S 31
+
+/* ------------------------------------------------------
+ * SDIO Command Response structures for SD1 and SD4 modes
+ * -----------------------------------------------------
+ */
+#define RSP4_IO_OCR_M BITFIELD_MASK(24) /* Bits [23:0] - Card's OCR Bits [23:0] */
+#define RSP4_IO_OCR_S 0
+#define RSP4_STUFF_M BITFIELD_MASK(3) /* Bits [26:24] - Stuff bits */
+#define RSP4_STUFF_S 24
+#define RSP4_MEM_PRESENT_M BITFIELD_MASK(1) /* Bit 27 - Memory present */
+#define RSP4_MEM_PRESENT_S 27
+#define RSP4_NUM_FUNCS_M BITFIELD_MASK(3) /* Bits [30:28] - Number of I/O funcs */
+#define RSP4_NUM_FUNCS_S 28
+#define RSP4_CARD_READY_M BITFIELD_MASK(1) /* Bit 31 - SDIO card ready */
+#define RSP4_CARD_READY_S 31
+
+#define RSP6_STATUS_M BITFIELD_MASK(16) /* Bits [15:0] - Card status bits [19,22,23,12:0]
+ */
+#define RSP6_STATUS_S 0
+#define RSP6_IO_RCA_M BITFIELD_MASK(16) /* Bits [31:16] - RCA bits[31-16] */
+#define RSP6_IO_RCA_S 16
+
+#define RSP1_AKE_SEQ_ERROR_M BITFIELD_MASK(1) /* Bit 3 - Authentication seq error */
+#define RSP1_AKE_SEQ_ERROR_S 3
+#define RSP1_APP_CMD_M BITFIELD_MASK(1) /* Bit 5 - Card expects ACMD */
+#define RSP1_APP_CMD_S 5
+#define RSP1_READY_FOR_DATA_M BITFIELD_MASK(1) /* Bit 8 - Ready for data (buff empty) */
+#define RSP1_READY_FOR_DATA_S 8
+#define RSP1_CURR_STATE_M BITFIELD_MASK(4) /* Bits [12:9] - State of card
+ * when Cmd was received
+ */
+#define RSP1_CURR_STATE_S 9
+#define RSP1_EARSE_RESET_M BITFIELD_MASK(1) /* Bit 13 - Erase seq cleared */
+#define RSP1_EARSE_RESET_S 13
+#define RSP1_CARD_ECC_DISABLE_M BITFIELD_MASK(1) /* Bit 14 - Card ECC disabled */
+#define RSP1_CARD_ECC_DISABLE_S 14
+#define RSP1_WP_ERASE_SKIP_M BITFIELD_MASK(1) /* Bit 15 - Partial blocks erased due to W/P */
+#define RSP1_WP_ERASE_SKIP_S 15
+#define RSP1_CID_CSD_OVERW_M BITFIELD_MASK(1) /* Bit 16 - Illegal write to CID or R/O bits
+ * of CSD
+ */
+#define RSP1_CID_CSD_OVERW_S 16
+#define RSP1_ERROR_M BITFIELD_MASK(1) /* Bit 19 - General/Unknown error */
+#define RSP1_ERROR_S 19
+#define RSP1_CC_ERROR_M BITFIELD_MASK(1) /* Bit 20 - Internal Card Control error */
+#define RSP1_CC_ERROR_S 20
+#define RSP1_CARD_ECC_FAILED_M BITFIELD_MASK(1) /* Bit 21 - Card internal ECC failed
+ * to correct data
+ */
+#define RSP1_CARD_ECC_FAILED_S 21
+#define RSP1_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 22 - Cmd not legal for the card state */
+#define RSP1_ILLEGAL_CMD_S 22
+#define RSP1_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 23 - CRC check of previous command failed
+ */
+#define RSP1_COM_CRC_ERROR_S 23
+#define RSP1_LOCK_UNLOCK_FAIL_M BITFIELD_MASK(1) /* Bit 24 - Card lock-unlock Cmd Seq error */
+#define RSP1_LOCK_UNLOCK_FAIL_S 24
+#define RSP1_CARD_LOCKED_M BITFIELD_MASK(1) /* Bit 25 - Card locked by the host */
+#define RSP1_CARD_LOCKED_S 25
+#define RSP1_WP_VIOLATION_M BITFIELD_MASK(1) /* Bit 26 - Attempt to program
+ * write-protected blocks
+ */
+#define RSP1_WP_VIOLATION_S 26
+#define RSP1_ERASE_PARAM_M BITFIELD_MASK(1) /* Bit 27 - Invalid erase blocks */
+#define RSP1_ERASE_PARAM_S 27
+#define RSP1_ERASE_SEQ_ERR_M BITFIELD_MASK(1) /* Bit 28 - Erase Cmd seq error */
+#define RSP1_ERASE_SEQ_ERR_S 28
+#define RSP1_BLK_LEN_ERR_M BITFIELD_MASK(1) /* Bit 29 - Block length error */
+#define RSP1_BLK_LEN_ERR_S 29
+#define RSP1_ADDR_ERR_M BITFIELD_MASK(1) /* Bit 30 - Misaligned address */
+#define RSP1_ADDR_ERR_S 30
+#define RSP1_OUT_OF_RANGE_M BITFIELD_MASK(1) /* Bit 31 - Cmd arg was out of range */
+#define RSP1_OUT_OF_RANGE_S 31
+
+
+#define RSP5_DATA_M BITFIELD_MASK(8) /* Bits [0:7] - data */
+#define RSP5_DATA_S 0
+#define RSP5_FLAGS_M BITFIELD_MASK(8) /* Bit [15:8] - Rsp flags */
+#define RSP5_FLAGS_S 8
+#define RSP5_STUFF_M BITFIELD_MASK(16) /* Bits [31:16] - Stuff bits */
+#define RSP5_STUFF_S 16
+
+/* ----------------------------------------------
+ * SDIO Command Response structures for SPI mode
+ * ----------------------------------------------
+ */
+#define SPIRSP4_IO_OCR_M BITFIELD_MASK(16) /* Bits [15:0] - Card's OCR Bits [23:8] */
+#define SPIRSP4_IO_OCR_S 0
+#define SPIRSP4_STUFF_M BITFIELD_MASK(3) /* Bits [18:16] - Stuff bits */
+#define SPIRSP4_STUFF_S 16
+#define SPIRSP4_MEM_PRESENT_M BITFIELD_MASK(1) /* Bit 19 - Memory present */
+#define SPIRSP4_MEM_PRESENT_S 19
+#define SPIRSP4_NUM_FUNCS_M BITFIELD_MASK(3) /* Bits [22:20] - Number of I/O funcs */
+#define SPIRSP4_NUM_FUNCS_S 20
+#define SPIRSP4_CARD_READY_M BITFIELD_MASK(1) /* Bit 23 - SDIO card ready */
+#define SPIRSP4_CARD_READY_S 23
+#define SPIRSP4_IDLE_STATE_M BITFIELD_MASK(1) /* Bit 24 - idle state */
+#define SPIRSP4_IDLE_STATE_S 24
+#define SPIRSP4_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 26 - Illegal Cmd error */
+#define SPIRSP4_ILLEGAL_CMD_S 26
+#define SPIRSP4_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 27 - COM CRC error */
+#define SPIRSP4_COM_CRC_ERROR_S 27
+#define SPIRSP4_FUNC_NUM_ERROR_M BITFIELD_MASK(1) /* Bit 28 - Function number error
+ */
+#define SPIRSP4_FUNC_NUM_ERROR_S 28
+#define SPIRSP4_PARAM_ERROR_M BITFIELD_MASK(1) /* Bit 30 - Parameter Error Bit */
+#define SPIRSP4_PARAM_ERROR_S 30
+#define SPIRSP4_START_BIT_M BITFIELD_MASK(1) /* Bit 31 - Start Bit */
+#define SPIRSP4_START_BIT_S 31
+
+#define SPIRSP5_DATA_M BITFIELD_MASK(8) /* Bits [23:16] - R/W Data */
+#define SPIRSP5_DATA_S 16
+#define SPIRSP5_IDLE_STATE_M BITFIELD_MASK(1) /* Bit 24 - Idle state */
+#define SPIRSP5_IDLE_STATE_S 24
+#define SPIRSP5_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 26 - Illegal Cmd error */
+#define SPIRSP5_ILLEGAL_CMD_S 26
+#define SPIRSP5_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 27 - COM CRC error */
+#define SPIRSP5_COM_CRC_ERROR_S 27
+#define SPIRSP5_FUNC_NUM_ERROR_M BITFIELD_MASK(1) /* Bit 28 - Function number error
+ */
+#define SPIRSP5_FUNC_NUM_ERROR_S 28
+#define SPIRSP5_PARAM_ERROR_M BITFIELD_MASK(1) /* Bit 30 - Parameter Error Bit */
+#define SPIRSP5_PARAM_ERROR_S 30
+#define SPIRSP5_START_BIT_M BITFIELD_MASK(1) /* Bit 31 - Start Bit */
+#define SPIRSP5_START_BIT_S 31
+
+/* RSP6 card status format; Pg 68 Physical Layer spec v 1.10 */
+#define RSP6STAT_AKE_SEQ_ERROR_M BITFIELD_MASK(1) /* Bit 3 - Authentication seq error
+ */
+#define RSP6STAT_AKE_SEQ_ERROR_S 3
+#define RSP6STAT_APP_CMD_M BITFIELD_MASK(1) /* Bit 5 - Card expects ACMD */
+#define RSP6STAT_APP_CMD_S 5
+#define RSP6STAT_READY_FOR_DATA_M BITFIELD_MASK(1) /* Bit 8 - Ready for data
+ * (buff empty)
+ */
+#define RSP6STAT_READY_FOR_DATA_S 8
+#define RSP6STAT_CURR_STATE_M BITFIELD_MASK(4) /* Bits [12:9] - Card state at
+ * Cmd reception
+ */
+#define RSP6STAT_CURR_STATE_S 9
+#define RSP6STAT_ERROR_M BITFIELD_MASK(1) /* Bit 13 - General/Unknown error Bit 19
+ */
+#define RSP6STAT_ERROR_S 13
+#define RSP6STAT_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 14 - Illegal cmd for
+ * card state Bit 22
+ */
+#define RSP6STAT_ILLEGAL_CMD_S 14
+#define RSP6STAT_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 15 - CRC previous command
+ * failed Bit 23
+ */
+#define RSP6STAT_COM_CRC_ERROR_S 15
+
+#define SDIOH_XFER_TYPE_READ SD_IO_OP_READ
+#define SDIOH_XFER_TYPE_WRITE SD_IO_OP_WRITE
+
+#endif /* _SDIO_H */
diff --git a/drivers/net/wireless/bcm4329/include/sdioh.h b/drivers/net/wireless/bcm4329/include/sdioh.h
new file mode 100644
index 0000000..8123452
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/sdioh.h
@@ -0,0 +1,299 @@
+/*
+ * SDIO Host Controller Spec header file
+ * Register map and definitions for the Standard Host Controller
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sdioh.h,v 13.13.18.1.16.3 2009/12/08 22:34:21 Exp $
+ */
+
+#ifndef _SDIOH_H
+#define _SDIOH_H
+
+#define SD_SysAddr 0x000
+#define SD_BlockSize 0x004
+#define SD_BlockCount 0x006
+#define SD_Arg0 0x008
+#define SD_Arg1 0x00A
+#define SD_TransferMode 0x00C
+#define SD_Command 0x00E
+#define SD_Response0 0x010
+#define SD_Response1 0x012
+#define SD_Response2 0x014
+#define SD_Response3 0x016
+#define SD_Response4 0x018
+#define SD_Response5 0x01A
+#define SD_Response6 0x01C
+#define SD_Response7 0x01E
+#define SD_BufferDataPort0 0x020
+#define SD_BufferDataPort1 0x022
+#define SD_PresentState 0x024
+#define SD_HostCntrl 0x028
+#define SD_PwrCntrl 0x029
+#define SD_BlockGapCntrl 0x02A
+#define SD_WakeupCntrl 0x02B
+#define SD_ClockCntrl 0x02C
+#define SD_TimeoutCntrl 0x02E
+#define SD_SoftwareReset 0x02F
+#define SD_IntrStatus 0x030
+#define SD_ErrorIntrStatus 0x032
+#define SD_IntrStatusEnable 0x034
+#define SD_ErrorIntrStatusEnable 0x036
+#define SD_IntrSignalEnable 0x038
+#define SD_ErrorIntrSignalEnable 0x03A
+#define SD_CMD12ErrorStatus 0x03C
+#define SD_Capabilities 0x040
+#define SD_Capabilities_Reserved 0x044
+#define SD_MaxCurCap 0x048
+#define SD_MaxCurCap_Reserved 0x04C
+#define SD_ADMA_SysAddr 0x58
+#define SD_SlotInterruptStatus 0x0FC
+#define SD_HostControllerVersion 0x0FE
+
+/* SD specific registers in PCI config space */
+#define SD_SlotInfo 0x40
+
+/* SD_Capabilities reg (0x040) */
+#define CAP_TO_CLKFREQ_M BITFIELD_MASK(6)
+#define CAP_TO_CLKFREQ_S 0
+#define CAP_TO_CLKUNIT_M BITFIELD_MASK(1)
+#define CAP_TO_CLKUNIT_S 7
+#define CAP_BASECLK_M BITFIELD_MASK(6)
+#define CAP_BASECLK_S 8
+#define CAP_MAXBLOCK_M BITFIELD_MASK(2)
+#define CAP_MAXBLOCK_S 16
+#define CAP_ADMA2_M BITFIELD_MASK(1)
+#define CAP_ADMA2_S 19
+#define CAP_ADMA1_M BITFIELD_MASK(1)
+#define CAP_ADMA1_S 20
+#define CAP_HIGHSPEED_M BITFIELD_MASK(1)
+#define CAP_HIGHSPEED_S 21
+#define CAP_DMA_M BITFIELD_MASK(1)
+#define CAP_DMA_S 22
+#define CAP_SUSPEND_M BITFIELD_MASK(1)
+#define CAP_SUSPEND_S 23
+#define CAP_VOLT_3_3_M BITFIELD_MASK(1)
+#define CAP_VOLT_3_3_S 24
+#define CAP_VOLT_3_0_M BITFIELD_MASK(1)
+#define CAP_VOLT_3_0_S 25
+#define CAP_VOLT_1_8_M BITFIELD_MASK(1)
+#define CAP_VOLT_1_8_S 26
+#define CAP_64BIT_HOST_M BITFIELD_MASK(1)
+#define CAP_64BIT_HOST_S 28
+
+/* SD_MaxCurCap reg (0x048) */
+#define CAP_CURR_3_3_M BITFIELD_MASK(8)
+#define CAP_CURR_3_3_S 0
+#define CAP_CURR_3_0_M BITFIELD_MASK(8)
+#define CAP_CURR_3_0_S 8
+#define CAP_CURR_1_8_M BITFIELD_MASK(8)
+#define CAP_CURR_1_8_S 16
+
+/* SD_SysAddr: Offset 0x0000, Size 4 bytes */
+
+/* SD_BlockSize: Offset 0x004, Size 2 bytes */
+#define BLKSZ_BLKSZ_M BITFIELD_MASK(12)
+#define BLKSZ_BLKSZ_S 0
+#define BLKSZ_BNDRY_M BITFIELD_MASK(3)
+#define BLKSZ_BNDRY_S 12
+
+/* SD_BlockCount: Offset 0x006, size 2 bytes */
+
+/* SD_Arg0: Offset 0x008, size = 4 bytes */
+/* SD_TransferMode Offset 0x00C, size = 2 bytes */
+#define XFER_DMA_ENABLE_M BITFIELD_MASK(1)
+#define XFER_DMA_ENABLE_S 0
+#define XFER_BLK_COUNT_EN_M BITFIELD_MASK(1)
+#define XFER_BLK_COUNT_EN_S 1
+#define XFER_CMD_12_EN_M BITFIELD_MASK(1)
+#define XFER_CMD_12_EN_S 2
+#define XFER_DATA_DIRECTION_M BITFIELD_MASK(1)
+#define XFER_DATA_DIRECTION_S 4
+#define XFER_MULTI_BLOCK_M BITFIELD_MASK(1)
+#define XFER_MULTI_BLOCK_S 5
+
+/* SD_Command: Offset 0x00E, size = 2 bytes */
+/* resp_type field */
+#define RESP_TYPE_NONE 0
+#define RESP_TYPE_136 1
+#define RESP_TYPE_48 2
+#define RESP_TYPE_48_BUSY 3
+/* type field */
+#define CMD_TYPE_NORMAL 0
+#define CMD_TYPE_SUSPEND 1
+#define CMD_TYPE_RESUME 2
+#define CMD_TYPE_ABORT 3
+
+#define CMD_RESP_TYPE_M BITFIELD_MASK(2) /* Bits [0-1] - Response type */
+#define CMD_RESP_TYPE_S 0
+#define CMD_CRC_EN_M BITFIELD_MASK(1) /* Bit 3 - CRC enable */
+#define CMD_CRC_EN_S 3
+#define CMD_INDEX_EN_M BITFIELD_MASK(1) /* Bit 4 - Enable index checking */
+#define CMD_INDEX_EN_S 4
+#define CMD_DATA_EN_M BITFIELD_MASK(1) /* Bit 5 - Using DAT line */
+#define CMD_DATA_EN_S 5
+#define CMD_TYPE_M BITFIELD_MASK(2) /* Bit [6-7] - Normal, abort, resume, etc
+ */
+#define CMD_TYPE_S 6
+#define CMD_INDEX_M BITFIELD_MASK(6) /* Bits [8-13] - Command number */
+#define CMD_INDEX_S 8
+
+/* SD_BufferDataPort0 : Offset 0x020, size = 2 or 4 bytes */
+/* SD_BufferDataPort1 : Offset 0x022, size = 2 bytes */
+/* SD_PresentState : Offset 0x024, size = 4 bytes */
+#define PRES_CMD_INHIBIT_M BITFIELD_MASK(1) /* Bit 0 May use CMD */
+#define PRES_CMD_INHIBIT_S 0
+#define PRES_DAT_INHIBIT_M BITFIELD_MASK(1) /* Bit 1 May use DAT */
+#define PRES_DAT_INHIBIT_S 1
+#define PRES_DAT_BUSY_M BITFIELD_MASK(1) /* Bit 2 DAT is busy */
+#define PRES_DAT_BUSY_S 2
+#define PRES_PRESENT_RSVD_M BITFIELD_MASK(5) /* Bit [3-7] rsvd */
+#define PRES_PRESENT_RSVD_S 3
+#define PRES_WRITE_ACTIVE_M BITFIELD_MASK(1) /* Bit 8 Write is active */
+#define PRES_WRITE_ACTIVE_S 8
+#define PRES_READ_ACTIVE_M BITFIELD_MASK(1) /* Bit 9 Read is active */
+#define PRES_READ_ACTIVE_S 9
+#define PRES_WRITE_DATA_RDY_M BITFIELD_MASK(1) /* Bit 10 Write buf is avail */
+#define PRES_WRITE_DATA_RDY_S 10
+#define PRES_READ_DATA_RDY_M BITFIELD_MASK(1) /* Bit 11 Read buf data avail */
+#define PRES_READ_DATA_RDY_S 11
+#define PRES_CARD_PRESENT_M BITFIELD_MASK(1) /* Bit 16 Card present - debounced */
+#define PRES_CARD_PRESENT_S 16
+#define PRES_CARD_STABLE_M BITFIELD_MASK(1) /* Bit 17 Debugging */
+#define PRES_CARD_STABLE_S 17
+#define PRES_CARD_PRESENT_RAW_M BITFIELD_MASK(1) /* Bit 18 Not debounced */
+#define PRES_CARD_PRESENT_RAW_S 18
+#define PRES_WRITE_ENABLED_M BITFIELD_MASK(1) /* Bit 19 Write protected? */
+#define PRES_WRITE_ENABLED_S 19
+#define PRES_DAT_SIGNAL_M BITFIELD_MASK(4) /* Bit [20-23] Debugging */
+#define PRES_DAT_SIGNAL_S 20
+#define PRES_CMD_SIGNAL_M BITFIELD_MASK(1) /* Bit 24 Debugging */
+#define PRES_CMD_SIGNAL_S 24
+
+/* SD_HostCntrl: Offset 0x028, size = 1 bytes */
+#define HOST_LED_M BITFIELD_MASK(1) /* Bit 0 LED On/Off */
+#define HOST_LED_S 0
+#define HOST_DATA_WIDTH_M BITFIELD_MASK(1) /* Bit 1 4 bit enable */
+#define HOST_DATA_WIDTH_S 1
+#define HOST_HI_SPEED_EN_M BITFIELD_MASK(1) /* Bit 2 High speed vs low speed */
+#define HOST_DMA_SEL_S 3
+#define HOST_DMA_SEL_M BITFIELD_MASK(2) /* Bit 4:3 DMA Select */
+#define HOST_HI_SPEED_EN_S 2
+
+/* misc defines */
+#define SD1_MODE 0x1 /* SD Host Cntrlr Spec */
+#define SD4_MODE 0x2 /* SD Host Cntrlr Spec */
+
+/* SD_PwrCntrl: Offset 0x029, size = 1 bytes */
+#define PWR_BUS_EN_M BITFIELD_MASK(1) /* Bit 0 Power the bus */
+#define PWR_BUS_EN_S 0
+#define PWR_VOLTS_M BITFIELD_MASK(3) /* Bit [1-3] Voltage Select */
+#define PWR_VOLTS_S 1
+
+/* SD_SoftwareReset: Offset 0x02F, size = 1 byte */
+#define SW_RESET_ALL_M BITFIELD_MASK(1) /* Bit 0 Reset All */
+#define SW_RESET_ALL_S 0
+#define SW_RESET_CMD_M BITFIELD_MASK(1) /* Bit 1 CMD Line Reset */
+#define SW_RESET_CMD_S 1
+#define SW_RESET_DAT_M BITFIELD_MASK(1) /* Bit 2 DAT Line Reset */
+#define SW_RESET_DAT_S 2
+
+/* SD_IntrStatus: Offset 0x030, size = 2 bytes */
+/* Defs also serve SD_IntrStatusEnable and SD_IntrSignalEnable */
+#define INTSTAT_CMD_COMPLETE_M BITFIELD_MASK(1) /* Bit 0 */
+#define INTSTAT_CMD_COMPLETE_S 0
+#define INTSTAT_XFER_COMPLETE_M BITFIELD_MASK(1)
+#define INTSTAT_XFER_COMPLETE_S 1
+#define INTSTAT_BLOCK_GAP_EVENT_M BITFIELD_MASK(1)
+#define INTSTAT_BLOCK_GAP_EVENT_S 2
+#define INTSTAT_DMA_INT_M BITFIELD_MASK(1)
+#define INTSTAT_DMA_INT_S 3
+#define INTSTAT_BUF_WRITE_READY_M BITFIELD_MASK(1)
+#define INTSTAT_BUF_WRITE_READY_S 4
+#define INTSTAT_BUF_READ_READY_M BITFIELD_MASK(1)
+#define INTSTAT_BUF_READ_READY_S 5
+#define INTSTAT_CARD_INSERTION_M BITFIELD_MASK(1)
+#define INTSTAT_CARD_INSERTION_S 6
+#define INTSTAT_CARD_REMOVAL_M BITFIELD_MASK(1)
+#define INTSTAT_CARD_REMOVAL_S 7
+#define INTSTAT_CARD_INT_M BITFIELD_MASK(1)
+#define INTSTAT_CARD_INT_S 8
+#define INTSTAT_ERROR_INT_M BITFIELD_MASK(1) /* Bit 15 */
+#define INTSTAT_ERROR_INT_S 15
+
+/* SD_ErrorIntrStatus: Offset 0x032, size = 2 bytes */
+/* Defs also serve SD_ErrorIntrStatusEnable and SD_ErrorIntrSignalEnable */
+#define ERRINT_CMD_TIMEOUT_M BITFIELD_MASK(1)
+#define ERRINT_CMD_TIMEOUT_S 0
+#define ERRINT_CMD_CRC_M BITFIELD_MASK(1)
+#define ERRINT_CMD_CRC_S 1
+#define ERRINT_CMD_ENDBIT_M BITFIELD_MASK(1)
+#define ERRINT_CMD_ENDBIT_S 2
+#define ERRINT_CMD_INDEX_M BITFIELD_MASK(1)
+#define ERRINT_CMD_INDEX_S 3
+#define ERRINT_DATA_TIMEOUT_M BITFIELD_MASK(1)
+#define ERRINT_DATA_TIMEOUT_S 4
+#define ERRINT_DATA_CRC_M BITFIELD_MASK(1)
+#define ERRINT_DATA_CRC_S 5
+#define ERRINT_DATA_ENDBIT_M BITFIELD_MASK(1)
+#define ERRINT_DATA_ENDBIT_S 6
+#define ERRINT_CURRENT_LIMIT_M BITFIELD_MASK(1)
+#define ERRINT_CURRENT_LIMIT_S 7
+#define ERRINT_AUTO_CMD12_M BITFIELD_MASK(1)
+#define ERRINT_AUTO_CMD12_S 8
+#define ERRINT_VENDOR_M BITFIELD_MASK(4)
+#define ERRINT_VENDOR_S 12
+
+/* Also provide definitions in "normal" form to allow combined masks */
+#define ERRINT_CMD_TIMEOUT_BIT 0x0001
+#define ERRINT_CMD_CRC_BIT 0x0002
+#define ERRINT_CMD_ENDBIT_BIT 0x0004
+#define ERRINT_CMD_INDEX_BIT 0x0008
+#define ERRINT_DATA_TIMEOUT_BIT 0x0010
+#define ERRINT_DATA_CRC_BIT 0x0020
+#define ERRINT_DATA_ENDBIT_BIT 0x0040
+#define ERRINT_CURRENT_LIMIT_BIT 0x0080
+#define ERRINT_AUTO_CMD12_BIT 0x0100
+
+/* Masks to select CMD vs. DATA errors */
+#define ERRINT_CMD_ERRS (ERRINT_CMD_TIMEOUT_BIT | ERRINT_CMD_CRC_BIT |\
+ ERRINT_CMD_ENDBIT_BIT | ERRINT_CMD_INDEX_BIT)
+#define ERRINT_DATA_ERRS (ERRINT_DATA_TIMEOUT_BIT | ERRINT_DATA_CRC_BIT |\
+ ERRINT_DATA_ENDBIT_BIT)
+#define ERRINT_TRANSFER_ERRS (ERRINT_CMD_ERRS | ERRINT_DATA_ERRS)
+
+/* SD_WakeupCntr_BlockGapCntrl : Offset 0x02A , size = bytes */
+/* SD_ClockCntrl : Offset 0x02C , size = bytes */
+/* SD_SoftwareReset_TimeoutCntrl : Offset 0x02E , size = bytes */
+/* SD_IntrStatus : Offset 0x030 , size = bytes */
+/* SD_ErrorIntrStatus : Offset 0x032 , size = bytes */
+/* SD_IntrStatusEnable : Offset 0x034 , size = bytes */
+/* SD_ErrorIntrStatusEnable : Offset 0x036 , size = bytes */
+/* SD_IntrSignalEnable : Offset 0x038 , size = bytes */
+/* SD_ErrorIntrSignalEnable : Offset 0x03A , size = bytes */
+/* SD_CMD12ErrorStatus : Offset 0x03C , size = bytes */
+/* SD_Capabilities : Offset 0x040 , size = bytes */
+/* SD_MaxCurCap : Offset 0x048 , size = bytes */
+/* SD_MaxCurCap_Reserved: Offset 0x04C , size = bytes */
+/* SD_SlotInterruptStatus: Offset 0x0FC , size = bytes */
+/* SD_HostControllerVersion : Offset 0x0FE , size = bytes */
+
+#endif /* _SDIOH_H */
diff --git a/drivers/net/wireless/bcm4329/include/sdiovar.h b/drivers/net/wireless/bcm4329/include/sdiovar.h
new file mode 100644
index 0000000..0179d4c
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/sdiovar.h
@@ -0,0 +1,58 @@
+/*
+ * Structure used by apps whose drivers access SDIO drivers.
+ * Pulled out separately so dhdu and wlu can both use it.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sdiovar.h,v 13.5.14.2.16.2 2009/12/08 22:34:21 Exp $
+ */
+
+#ifndef _sdiovar_h_
+#define _sdiovar_h_
+
+#include <typedefs.h>
+
+/* require default structure packing */
+#define BWL_DEFAULT_PACKING
+#include <packed_section_start.h>
+
+typedef struct sdreg {
+ int func;
+ int offset;
+ int value;
+} sdreg_t;
+
+/* Common msglevel constants */
+#define SDH_ERROR_VAL 0x0001 /* Error */
+#define SDH_TRACE_VAL 0x0002 /* Trace */
+#define SDH_INFO_VAL 0x0004 /* Info */
+#define SDH_DEBUG_VAL 0x0008 /* Debug */
+#define SDH_DATA_VAL 0x0010 /* Data */
+#define SDH_CTRL_VAL 0x0020 /* Control Regs */
+#define SDH_LOG_VAL 0x0040 /* Enable bcmlog */
+#define SDH_DMA_VAL 0x0080 /* DMA */
+
+#define NUM_PREV_TRANSACTIONS 16
+
+
+#include <packed_section_end.h>
+
+#endif /* _sdiovar_h_ */
diff --git a/drivers/net/wireless/bcm4329/include/siutils.h b/drivers/net/wireless/bcm4329/include/siutils.h
new file mode 100644
index 0000000..cb9f140
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/siutils.h
@@ -0,0 +1,235 @@
+/*
+ * Misc utility routines for accessing the SOC Interconnects
+ * of Broadcom HNBU chips.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: siutils.h,v 13.197.4.2.4.3.8.16 2010/06/23 21:36:05 Exp $
+ */
+
+
+#ifndef _siutils_h_
+#define _siutils_h_
+
+
+struct si_pub {
+ uint socitype;
+
+ uint bustype;
+ uint buscoretype;
+ uint buscorerev;
+ uint buscoreidx;
+ int ccrev;
+ uint32 cccaps;
+ int pmurev;
+ uint32 pmucaps;
+ uint boardtype;
+ uint boardvendor;
+ uint boardflags;
+ uint chip;
+ uint chiprev;
+ uint chippkg;
+ uint32 chipst;
+ bool issim;
+ uint socirev;
+ bool pci_pr32414;
+};
+
+#if defined(WLC_HIGH) && !defined(WLC_LOW)
+typedef struct si_pub si_t;
+#else
+typedef const struct si_pub si_t;
+#endif
+
+
+#define SI_OSH NULL
+
+
+#define XTAL 0x1
+#define PLL 0x2
+
+
+#define CLK_FAST 0
+#define CLK_DYNAMIC 2
+
+
+#define GPIO_DRV_PRIORITY 0
+#define GPIO_APP_PRIORITY 1
+#define GPIO_HI_PRIORITY 2
+
+
+#define GPIO_PULLUP 0
+#define GPIO_PULLDN 1
+
+
+#define GPIO_REGEVT 0
+#define GPIO_REGEVT_INTMSK 1
+#define GPIO_REGEVT_INTPOL 2
+
+
+#define SI_DEVPATH_BUFSZ 16
+
+
+#define SI_DOATTACH 1
+#define SI_PCIDOWN 2
+#define SI_PCIUP 3
+
+#define ISSIM_ENAB(sih) 0
+
+
+#if defined(BCMPMUCTL)
+#define PMUCTL_ENAB(sih) (BCMPMUCTL)
+#else
+#define PMUCTL_ENAB(sih) ((sih)->cccaps & CC_CAP_PMU)
+#endif
+
+
+#if defined(BCMPMUCTL) && BCMPMUCTL
+#define CCCTL_ENAB(sih) (0)
+#define CCPLL_ENAB(sih) (0)
+#else
+#define CCCTL_ENAB(sih) ((sih)->cccaps & CC_CAP_PWR_CTL)
+#define CCPLL_ENAB(sih) ((sih)->cccaps & CC_CAP_PLL_MASK)
+#endif
+
+typedef void (*gpio_handler_t)(uint32 stat, void *arg);
+
+
+
+extern si_t *si_attach(uint pcidev, osl_t *osh, void *regs, uint bustype,
+ void *sdh, char **vars, uint *varsz);
+extern si_t *si_kattach(osl_t *osh);
+extern void si_detach(si_t *sih);
+extern bool si_pci_war16165(si_t *sih);
+
+extern uint si_corelist(si_t *sih, uint coreid[]);
+extern uint si_coreid(si_t *sih);
+extern uint si_flag(si_t *sih);
+extern uint si_intflag(si_t *sih);
+extern uint si_coreidx(si_t *sih);
+extern uint si_coreunit(si_t *sih);
+extern uint si_corevendor(si_t *sih);
+extern uint si_corerev(si_t *sih);
+extern void *si_osh(si_t *sih);
+extern void si_setosh(si_t *sih, osl_t *osh);
+extern uint si_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val);
+extern void *si_coreregs(si_t *sih);
+extern void si_write_wrapperreg(si_t *sih, uint32 offset, uint32 val);
+extern uint32 si_core_cflags(si_t *sih, uint32 mask, uint32 val);
+extern void si_core_cflags_wo(si_t *sih, uint32 mask, uint32 val);
+extern uint32 si_core_sflags(si_t *sih, uint32 mask, uint32 val);
+extern bool si_iscoreup(si_t *sih);
+extern uint si_findcoreidx(si_t *sih, uint coreid, uint coreunit);
+extern void *si_setcoreidx(si_t *sih, uint coreidx);
+extern void *si_setcore(si_t *sih, uint coreid, uint coreunit);
+extern void *si_switch_core(si_t *sih, uint coreid, uint *origidx, uint *intr_val);
+extern void si_restore_core(si_t *sih, uint coreid, uint intr_val);
+extern int si_numaddrspaces(si_t *sih);
+extern uint32 si_addrspace(si_t *sih, uint asidx);
+extern uint32 si_addrspacesize(si_t *sih, uint asidx);
+extern int si_corebist(si_t *sih);
+extern void si_core_reset(si_t *sih, uint32 bits, uint32 resetbits);
+extern void si_core_tofixup(si_t *sih);
+extern void si_core_disable(si_t *sih, uint32 bits);
+extern uint32 si_clock_rate(uint32 pll_type, uint32 n, uint32 m);
+extern uint32 si_clock(si_t *sih);
+extern void si_clock_pmu_spuravoid(si_t *sih, bool spuravoid);
+extern uint32 si_alp_clock(si_t *sih);
+extern uint32 si_ilp_clock(si_t *sih);
+extern void si_pci_setup(si_t *sih, uint coremask);
+extern void si_pcmcia_init(si_t *sih);
+extern void si_setint(si_t *sih, int siflag);
+extern bool si_backplane64(si_t *sih);
+extern void si_register_intr_callback(si_t *sih, void *intrsoff_fn, void *intrsrestore_fn,
+ void *intrsenabled_fn, void *intr_arg);
+extern void si_deregister_intr_callback(si_t *sih);
+extern void si_clkctl_init(si_t *sih);
+extern uint16 si_clkctl_fast_pwrup_delay(si_t *sih);
+extern bool si_clkctl_cc(si_t *sih, uint mode);
+extern int si_clkctl_xtal(si_t *sih, uint what, bool on);
+extern uint32 si_gpiotimerval(si_t *sih, uint32 mask, uint32 val);
+extern bool si_backplane64(si_t *sih);
+extern void si_btcgpiowar(si_t *sih);
+extern bool si_deviceremoved(si_t *sih);
+extern uint32 si_socram_size(si_t *sih);
+
+extern void si_watchdog(si_t *sih, uint ticks);
+extern void si_watchdog_ms(si_t *sih, uint32 ms);
+extern void *si_gpiosetcore(si_t *sih);
+extern uint32 si_gpiocontrol(si_t *sih, uint32 mask, uint32 val, uint8 priority);
+extern uint32 si_gpioouten(si_t *sih, uint32 mask, uint32 val, uint8 priority);
+extern uint32 si_gpioout(si_t *sih, uint32 mask, uint32 val, uint8 priority);
+extern uint32 si_gpioin(si_t *sih);
+extern uint32 si_gpiointpolarity(si_t *sih, uint32 mask, uint32 val, uint8 priority);
+extern uint32 si_gpiointmask(si_t *sih, uint32 mask, uint32 val, uint8 priority);
+extern uint32 si_gpioled(si_t *sih, uint32 mask, uint32 val);
+extern uint32 si_gpioreserve(si_t *sih, uint32 gpio_num, uint8 priority);
+extern uint32 si_gpiorelease(si_t *sih, uint32 gpio_num, uint8 priority);
+extern uint32 si_gpiopull(si_t *sih, bool updown, uint32 mask, uint32 val);
+extern uint32 si_gpioevent(si_t *sih, uint regtype, uint32 mask, uint32 val);
+extern uint32 si_gpio_int_enable(si_t *sih, bool enable);
+
+
+extern void *si_gpio_handler_register(si_t *sih, uint32 e, bool lev, gpio_handler_t cb, void *arg);
+extern void si_gpio_handler_unregister(si_t *sih, void* gpioh);
+extern void si_gpio_handler_process(si_t *sih);
+
+
+extern bool si_pci_pmecap(si_t *sih);
+struct osl_info;
+extern bool si_pci_fastpmecap(struct osl_info *osh);
+extern bool si_pci_pmeclr(si_t *sih);
+extern void si_pci_pmeen(si_t *sih);
+extern uint si_pcie_readreg(void *sih, uint addrtype, uint offset);
+
+extern void si_sdio_init(si_t *sih);
+
+extern uint16 si_d11_devid(si_t *sih);
+extern int si_corepciid(si_t *sih, uint func, uint16 *pcivendor, uint16 *pcidevice,
+ uint8 *pciclass, uint8 *pcisubclass, uint8 *pciprogif, uint8 *pciheader);
+
+#define si_eci_init(sih) (0)
+#define si_eci_notify_bt(sih, type, val, interrupt) (0)
+
+
+
+extern int si_devpath(si_t *sih, char *path, int size);
+
+extern char *si_getdevpathvar(si_t *sih, const char *name);
+extern int si_getdevpathintvar(si_t *sih, const char *name);
+
+
+extern uint8 si_pcieclkreq(si_t *sih, uint32 mask, uint32 val);
+extern void si_war42780_clkreq(si_t *sih, bool clkreq);
+extern void si_pci_sleep(si_t *sih);
+extern void si_pci_down(si_t *sih);
+extern void si_pci_up(si_t *sih);
+extern void si_pcie_war_ovr_disable(si_t *sih);
+extern void si_pcie_extendL1timer(si_t *sih, bool extend);
+extern int si_pci_fixcfg(si_t *sih);
+
+
+
+
+
+
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/spid.h b/drivers/net/wireless/bcm4329/include/spid.h
new file mode 100644
index 0000000..c740296
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/spid.h
@@ -0,0 +1,153 @@
+/*
+ * SPI device spec header file
+ *
+ * Copyright (C) 2010, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * This is UNPUBLISHED PROPRIETARY SOURCE CODE of Broadcom Corporation;
+ * the contents of this file may not be disclosed to third parties, copied
+ * or duplicated in any form, in whole or in part, without the prior
+ * written permission of Broadcom Corporation.
+ *
+ * $Id: spid.h,v 1.7.10.1.16.3 2009/04/09 19:23:14 Exp $
+ */
+
+#ifndef _SPI_H
+#define _SPI_H
+
+/*
+ * Brcm SPI Device Register Map.
+ *
+ */
+
+typedef volatile struct {
+ uint8 config; /* 0x00, len, endian, clock, speed, polarity, wakeup */
+ uint8 response_delay; /* 0x01, read response delay in bytes (corerev < 3) */
+ uint8 status_enable; /* 0x02, status-enable, intr with status, response_delay
+ * function selection, command/data error check
+ */
+ uint8 reset_bp; /* 0x03, reset on wlan/bt backplane reset (corerev >= 1) */
+ uint16 intr_reg; /* 0x04, Intr status register */
+ uint16 intr_en_reg; /* 0x06, Intr mask register */
+ uint32 status_reg; /* 0x08, RO, Status bits of last spi transfer */
+ uint16 f1_info_reg; /* 0x0c, RO, enabled, ready for data transfer, blocksize */
+ uint16 f2_info_reg; /* 0x0e, RO, enabled, ready for data transfer, blocksize */
+ uint16 f3_info_reg; /* 0x10, RO, enabled, ready for data transfer, blocksize */
+ uint32 test_read; /* 0x14, RO 0xfeedbead signature */
+ uint32 test_rw; /* 0x18, RW */
+ uint8 resp_delay_f0; /* 0x1c, read resp delay bytes for F0 (corerev >= 3) */
+ uint8 resp_delay_f1; /* 0x1d, read resp delay bytes for F1 (corerev >= 3) */
+ uint8 resp_delay_f2; /* 0x1e, read resp delay bytes for F2 (corerev >= 3) */
+ uint8 resp_delay_f3; /* 0x1f, read resp delay bytes for F3 (corerev >= 3) */
+} spi_regs_t;
+
+/* SPI device register offsets */
+#define SPID_CONFIG 0x00
+#define SPID_RESPONSE_DELAY 0x01
+#define SPID_STATUS_ENABLE 0x02
+#define SPID_RESET_BP 0x03 /* (corerev >= 1) */
+#define SPID_INTR_REG 0x04 /* 16 bits - Interrupt status */
+#define SPID_INTR_EN_REG 0x06 /* 16 bits - Interrupt mask */
+#define SPID_STATUS_REG 0x08 /* 32 bits */
+#define SPID_F1_INFO_REG 0x0C /* 16 bits */
+#define SPID_F2_INFO_REG 0x0E /* 16 bits */
+#define SPID_F3_INFO_REG 0x10 /* 16 bits */
+#define SPID_TEST_READ 0x14 /* 32 bits */
+#define SPID_TEST_RW 0x18 /* 32 bits */
+#define SPID_RESP_DELAY_F0 0x1c /* 8 bits (corerev >= 3) */
+#define SPID_RESP_DELAY_F1 0x1d /* 8 bits (corerev >= 3) */
+#define SPID_RESP_DELAY_F2 0x1e /* 8 bits (corerev >= 3) */
+#define SPID_RESP_DELAY_F3 0x1f /* 8 bits (corerev >= 3) */
+
+/* Bit masks for SPID_CONFIG device register */
+#define WORD_LENGTH_32 0x1 /* 0/1 16/32 bit word length */
+#define ENDIAN_BIG 0x2 /* 0/1 Little/Big Endian */
+#define CLOCK_PHASE 0x4 /* 0/1 clock phase delay */
+#define CLOCK_POLARITY 0x8 /* 0/1 Idle state clock polarity is low/high */
+#define HIGH_SPEED_MODE 0x10 /* 1/0 High Speed mode / Normal mode */
+#define INTR_POLARITY 0x20 /* 1/0 Interrupt active polarity is high/low */
+#define WAKE_UP 0x80 /* 0/1 Wake-up command from Host to WLAN */
+
+/* Bit mask for SPID_RESPONSE_DELAY device register */
+#define RESPONSE_DELAY_MASK 0xFF /* Configurable rd response delay in multiples of 8 bits */
+
+/* Bit mask for SPID_STATUS_ENABLE device register */
+#define STATUS_ENABLE 0x1 /* 1/0 Status sent/not sent to host after read/write */
+#define INTR_WITH_STATUS 0x2 /* 0/1 Do-not / do-interrupt if status is sent */
+#define RESP_DELAY_ALL 0x4 /* Applicability of resp delay to F1 or all func's read */
+#define DWORD_PKT_LEN_EN 0x8 /* Packet len denoted in dwords instead of bytes */
+#define CMD_ERR_CHK_EN 0x20 /* Command error check enable */
+#define DATA_ERR_CHK_EN 0x40 /* Data error check enable */
+
+/* Bit mask for SPID_RESET_BP device register */
+#define RESET_ON_WLAN_BP_RESET 0x4 /* enable reset for WLAN backplane */
+#define RESET_ON_BT_BP_RESET 0x8 /* enable reset for BT backplane */
+#define RESET_SPI 0x80 /* reset the above enabled logic */
+
+/* Bit mask for SPID_INTR_REG device register */
+#define DATA_UNAVAILABLE 0x0001 /* Requested data not available; Clear by writing a "1" */
+#define F2_F3_FIFO_RD_UNDERFLOW 0x0002
+#define F2_F3_FIFO_WR_OVERFLOW 0x0004
+#define COMMAND_ERROR 0x0008 /* Cleared by writing 1 */
+#define DATA_ERROR 0x0010 /* Cleared by writing 1 */
+#define F2_PACKET_AVAILABLE 0x0020
+#define F3_PACKET_AVAILABLE 0x0040
+#define F1_OVERFLOW 0x0080 /* Due to last write. Bkplane has pending write requests */
+#define MISC_INTR0 0x0100
+#define MISC_INTR1 0x0200
+#define MISC_INTR2 0x0400
+#define MISC_INTR3 0x0800
+#define MISC_INTR4 0x1000
+#define F1_INTR 0x2000
+#define F2_INTR 0x4000
+#define F3_INTR 0x8000
+
+/* Bit mask for 32bit SPID_STATUS_REG device register */
+#define STATUS_DATA_NOT_AVAILABLE 0x00000001
+#define STATUS_UNDERFLOW 0x00000002
+#define STATUS_OVERFLOW 0x00000004
+#define STATUS_F2_INTR 0x00000008
+#define STATUS_F3_INTR 0x00000010
+#define STATUS_F2_RX_READY 0x00000020
+#define STATUS_F3_RX_READY 0x00000040
+#define STATUS_HOST_CMD_DATA_ERR 0x00000080
+#define STATUS_F2_PKT_AVAILABLE 0x00000100
+#define STATUS_F2_PKT_LEN_MASK 0x000FFE00
+#define STATUS_F2_PKT_LEN_SHIFT 9
+#define STATUS_F3_PKT_AVAILABLE 0x00100000
+#define STATUS_F3_PKT_LEN_MASK 0xFFE00000
+#define STATUS_F3_PKT_LEN_SHIFT 21
+
+/* Bit mask for 16 bits SPID_F1_INFO_REG device register */
+#define F1_ENABLED 0x0001
+#define F1_RDY_FOR_DATA_TRANSFER 0x0002
+#define F1_MAX_PKT_SIZE 0x01FC
+
+/* Bit mask for 16 bits SPID_F2_INFO_REG device register */
+#define F2_ENABLED 0x0001
+#define F2_RDY_FOR_DATA_TRANSFER 0x0002
+#define F2_MAX_PKT_SIZE 0x3FFC
+
+/* Bit mask for 16 bits SPID_F3_INFO_REG device register */
+#define F3_ENABLED 0x0001
+#define F3_RDY_FOR_DATA_TRANSFER 0x0002
+#define F3_MAX_PKT_SIZE 0x3FFC
+
+/* Bit mask for 32 bits SPID_TEST_READ device register read in 16bit LE mode */
+#define TEST_RO_DATA_32BIT_LE 0xFEEDBEAD
+
+/* Maximum number of I/O funcs */
+#define SPI_MAX_IOFUNCS 4
+
+#define SPI_MAX_PKT_LEN (2048*4)
+
+/* Misc defines */
+#define SPI_FUNC_0 0
+#define SPI_FUNC_1 1
+#define SPI_FUNC_2 2
+#define SPI_FUNC_3 3
+
+#define WAIT_F2RXFIFORDY 100
+#define WAIT_F2RXFIFORDY_DELAY 20
+
+#endif /* _SPI_H */
diff --git a/drivers/net/wireless/bcm4329/include/trxhdr.h b/drivers/net/wireless/bcm4329/include/trxhdr.h
new file mode 100644
index 0000000..8f5eed9
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/trxhdr.h
@@ -0,0 +1,46 @@
+/*
+ * TRX image file header format.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: trxhdr.h,v 13.11.310.1 2008/08/17 12:58:58 Exp $
+ */
+
+#include <typedefs.h>
+
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+#define TRX_VERSION 1 /* Version 1 */
+#define TRX_MAX_LEN 0x3A0000 /* Max length */
+#define TRX_NO_HEADER 1 /* Do not write TRX header */
+#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */
+#define TRX_MAX_OFFSET 3 /* Max number of individual files */
+#define TRX_UNCOMP_IMAGE 0x20 /* Trx contains uncompressed rtecdc.bin image */
+
+struct trx_header {
+ uint32 magic; /* "HDR0" */
+ uint32 len; /* Length of file including header */
+ uint32 crc32; /* 32-bit CRC from flag_version to end of file */
+ uint32 flag_version; /* 0:15 flags, 16:31 version */
+ uint32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
+};
+
+/* Compatibility */
+typedef struct trx_header TRXHDR, *PTRXHDR;
diff --git a/drivers/net/wireless/bcm4329/include/typedefs.h b/drivers/net/wireless/bcm4329/include/typedefs.h
new file mode 100644
index 0000000..4d9dd76
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/typedefs.h
@@ -0,0 +1,303 @@
+/*
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: typedefs.h,v 1.85.34.1.2.5 2009/01/27 04:09:40 Exp $
+ */
+
+
+#ifndef _TYPEDEFS_H_
+#define _TYPEDEFS_H_
+
+#ifdef SITE_TYPEDEFS
+
+
+
+#include "site_typedefs.h"
+
+#else
+
+
+
+#ifdef __cplusplus
+
+#define TYPEDEF_BOOL
+#ifndef FALSE
+#define FALSE false
+#endif
+#ifndef TRUE
+#define TRUE true
+#endif
+
+#else
+
+
+#endif
+
+#if defined(__x86_64__)
+#define TYPEDEF_UINTPTR
+typedef unsigned long long int uintptr;
+#endif
+
+
+
+
+#if defined(TARGETOS_nucleus)
+
+#include <stddef.h>
+
+
+#define TYPEDEF_FLOAT_T
+#endif
+
+#if defined(_NEED_SIZE_T_)
+typedef long unsigned int size_t;
+#endif
+
+#ifdef __DJGPP__
+typedef long unsigned int size_t;
+#endif
+
+
+
+
+
+#define TYPEDEF_UINT
+#ifndef TARGETENV_android
+#define TYPEDEF_USHORT
+#define TYPEDEF_ULONG
+#endif
+#ifdef __KERNEL__
+#include <linux/version.h>
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19))
+#define TYPEDEF_BOOL
+#endif
+#endif
+
+
+
+
+
+#if defined(__GNUC__) && defined(__STRICT_ANSI__)
+#define TYPEDEF_INT64
+#define TYPEDEF_UINT64
+#endif
+
+
+#if defined(__ICL)
+
+#define TYPEDEF_INT64
+
+#if defined(__STDC__)
+#define TYPEDEF_UINT64
+#endif
+
+#endif
+
+#if !defined(__DJGPP__) && !defined(TARGETOS_nucleus)
+
+
+#if defined(__KERNEL__)
+
+#include <linux/types.h>
+
+#else
+
+
+#include <sys/types.h>
+
+#endif
+
+#endif
+
+
+
+
+#define USE_TYPEDEF_DEFAULTS
+
+#endif
+
+
+
+
+#ifdef USE_TYPEDEF_DEFAULTS
+#undef USE_TYPEDEF_DEFAULTS
+
+#ifndef TYPEDEF_BOOL
+typedef unsigned char bool;
+#endif
+
+
+
+#ifndef TYPEDEF_UCHAR
+typedef unsigned char uchar;
+#endif
+
+#ifndef TYPEDEF_USHORT
+typedef unsigned short ushort;
+#endif
+
+#ifndef TYPEDEF_UINT
+typedef unsigned int uint;
+#endif
+
+#ifndef TYPEDEF_ULONG
+typedef unsigned long ulong;
+#endif
+
+
+
+#ifndef TYPEDEF_UINT8
+typedef unsigned char uint8;
+#endif
+
+#ifndef TYPEDEF_UINT16
+typedef unsigned short uint16;
+#endif
+
+#ifndef TYPEDEF_UINT32
+typedef unsigned int uint32;
+#endif
+
+#ifndef TYPEDEF_UINT64
+typedef unsigned long long uint64;
+#endif
+
+#ifndef TYPEDEF_UINTPTR
+typedef unsigned int uintptr;
+#endif
+
+#ifndef TYPEDEF_INT8
+typedef signed char int8;
+#endif
+
+#ifndef TYPEDEF_INT16
+typedef signed short int16;
+#endif
+
+#ifndef TYPEDEF_INT32
+typedef signed int int32;
+#endif
+
+#ifndef TYPEDEF_INT64
+typedef signed long long int64;
+#endif
+
+
+
+#ifndef TYPEDEF_FLOAT32
+typedef float float32;
+#endif
+
+#ifndef TYPEDEF_FLOAT64
+typedef double float64;
+#endif
+
+
+
+#ifndef TYPEDEF_FLOAT_T
+
+#if defined(FLOAT32)
+typedef float32 float_t;
+#else
+typedef float64 float_t;
+#endif
+
+#endif
+
+
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#ifndef OFF
+#define OFF 0
+#endif
+
+#ifndef ON
+#define ON 1
+#endif
+
+#define AUTO (-1)
+
+
+
+#ifndef PTRSZ
+#define PTRSZ sizeof(char*)
+#endif
+
+
+
+#if defined(__GNUC__)
+ #define BWL_COMPILER_GNU
+#elif defined(__CC_ARM)
+ #define BWL_COMPILER_ARMCC
+#else
+ #error "Unknown compiler!"
+#endif
+
+
+#ifndef INLINE
+ #if defined(BWL_COMPILER_MICROSOFT)
+ #define INLINE __inline
+ #elif defined(BWL_COMPILER_GNU)
+ #define INLINE __inline__
+ #elif defined(BWL_COMPILER_ARMCC)
+ #define INLINE __inline
+ #else
+ #define INLINE
+ #endif
+#endif
+
+#undef TYPEDEF_BOOL
+#undef TYPEDEF_UCHAR
+#undef TYPEDEF_USHORT
+#undef TYPEDEF_UINT
+#undef TYPEDEF_ULONG
+#undef TYPEDEF_UINT8
+#undef TYPEDEF_UINT16
+#undef TYPEDEF_UINT32
+#undef TYPEDEF_UINT64
+#undef TYPEDEF_UINTPTR
+#undef TYPEDEF_INT8
+#undef TYPEDEF_INT16
+#undef TYPEDEF_INT32
+#undef TYPEDEF_INT64
+#undef TYPEDEF_FLOAT32
+#undef TYPEDEF_FLOAT64
+#undef TYPEDEF_FLOAT_T
+
+#endif
+
+
+#define UNUSED_PARAMETER(x) (void)(x)
+
+
+#include <bcmdefs.h>
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/include/wlioctl.h b/drivers/net/wireless/bcm4329/include/wlioctl.h
new file mode 100644
index 0000000..cd7725a
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/include/wlioctl.h
@@ -0,0 +1,1664 @@
+/*
+ * Custom OID/ioctl definitions for
+ * Broadcom 802.11abg Networking Device Driver
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: wlioctl.h,v 1.601.4.15.2.14.2.62.4.1 2010/11/17 03:09:28 Exp $
+ */
+
+
+#ifndef _wlioctl_h_
+#define _wlioctl_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+#include <proto/bcmeth.h>
+#include <proto/bcmevent.h>
+#include <proto/802.11.h>
+#include <bcmwifi.h>
+
+
+
+#define ACTION_FRAME_SIZE 1040
+
+typedef struct wl_action_frame {
+ struct ether_addr da;
+ uint16 len;
+ uint32 packetId;
+ uint8 data[ACTION_FRAME_SIZE];
+} wl_action_frame_t;
+
+#define WL_WIFI_ACTION_FRAME_SIZE sizeof(struct wl_action_frame)
+
+
+#define BWL_DEFAULT_PACKING
+#include <packed_section_start.h>
+
+#define RWL_ACTION_WIFI_CATEGORY 127
+#define RWL_WIFI_OUI_BYTE1 0x90
+#define RWL_WIFI_OUI_BYTE2 0x4C
+#define RWL_WIFI_OUI_BYTE3 0x0F
+#define RWL_WIFI_ACTION_FRAME_SIZE sizeof(struct dot11_action_wifi_vendor_specific)
+#define RWL_WIFI_DEFAULT 0x00
+#define RWL_WIFI_FIND_MY_PEER 0x09
+#define RWL_WIFI_FOUND_PEER 0x0A
+#define RWL_ACTION_WIFI_FRAG_TYPE 0x55
+
+typedef struct ssid_info
+{
+ uint8 ssid_len;
+ uint8 ssid[32];
+} ssid_info_t;
+
+typedef struct cnt_rx
+{
+ uint32 cnt_rxundec;
+ uint32 cnt_rxframe;
+} cnt_rx_t;
+
+
+
+#define RWL_REF_MAC_ADDRESS_OFFSET 17
+#define RWL_DUT_MAC_ADDRESS_OFFSET 23
+#define RWL_WIFI_CLIENT_CHANNEL_OFFSET 50
+#define RWL_WIFI_SERVER_CHANNEL_OFFSET 51
+
+
+
+
+
+#define WL_BSS_INFO_VERSION 108
+
+
+typedef struct wl_bss_info {
+ uint32 version;
+ uint32 length;
+ struct ether_addr BSSID;
+ uint16 beacon_period;
+ uint16 capability;
+ uint8 SSID_len;
+ uint8 SSID[32];
+ struct {
+ uint count;
+ uint8 rates[16];
+ } rateset;
+ chanspec_t chanspec;
+ uint16 atim_window;
+ uint8 dtim_period;
+ int16 RSSI;
+ int8 phy_noise;
+
+ uint8 n_cap;
+ uint32 nbss_cap;
+ uint8 ctl_ch;
+ uint32 reserved32[1];
+ uint8 flags;
+ uint8 reserved[3];
+ uint8 basic_mcs[MCSSET_LEN];
+
+ uint16 ie_offset;
+ uint32 ie_length;
+
+
+} wl_bss_info_t;
+
+typedef struct wlc_ssid {
+ uint32 SSID_len;
+ uchar SSID[32];
+} wlc_ssid_t;
+
+
+#define WL_BSSTYPE_INFRA 1
+#define WL_BSSTYPE_INDEP 0
+#define WL_BSSTYPE_ANY 2
+
+
+#define WL_SCANFLAGS_PASSIVE 0x01
+#define WL_SCANFLAGS_PROHIBITED 0x04
+
+typedef struct wl_scan_params {
+ wlc_ssid_t ssid;
+ struct ether_addr bssid;
+ int8 bss_type;
+ int8 scan_type;
+ int32 nprobes;
+ int32 active_time;
+ int32 passive_time;
+ int32 home_time;
+ int32 channel_num;
+ uint16 channel_list[1];
+} wl_scan_params_t;
+
+#define WL_SCAN_PARAMS_FIXED_SIZE 64
+
+
+#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff
+#define WL_SCAN_PARAMS_NSSID_SHIFT 16
+
+#define WL_SCAN_ACTION_START 1
+#define WL_SCAN_ACTION_CONTINUE 2
+#define WL_SCAN_ACTION_ABORT 3
+
+#define ISCAN_REQ_VERSION 1
+
+
+typedef struct wl_iscan_params {
+ uint32 version;
+ uint16 action;
+ uint16 scan_duration;
+ wl_scan_params_t params;
+} wl_iscan_params_t;
+
+#define WL_ISCAN_PARAMS_FIXED_SIZE (OFFSETOF(wl_iscan_params_t, params) + sizeof(wlc_ssid_t))
+
+typedef struct wl_scan_results {
+ uint32 buflen;
+ uint32 version;
+ uint32 count;
+ wl_bss_info_t bss_info[1];
+} wl_scan_results_t;
+
+#define WL_SCAN_RESULTS_FIXED_SIZE 12
+
+
+#define WL_SCAN_RESULTS_SUCCESS 0
+#define WL_SCAN_RESULTS_PARTIAL 1
+#define WL_SCAN_RESULTS_PENDING 2
+#define WL_SCAN_RESULTS_ABORTED 3
+#define WL_SCAN_RESULTS_NO_MEM 4
+
+#define ESCAN_REQ_VERSION 1
+
+typedef struct wl_escan_params {
+ uint32 version;
+ uint16 action;
+ uint16 sync_id;
+ wl_scan_params_t params;
+} wl_escan_params_t;
+
+#define WL_ESCAN_PARAMS_FIXED_SIZE (OFFSETOF(wl_escan_params_t, params) + sizeof(wlc_ssid_t))
+
+typedef struct wl_escan_result {
+ uint32 buflen;
+ uint32 version;
+ uint16 sync_id;
+ uint16 bss_count;
+ wl_bss_info_t bss_info[1];
+} wl_escan_result_t;
+
+#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(wl_escan_result_t) - sizeof(wl_bss_info_t))
+
+
+typedef struct wl_iscan_results {
+ uint32 status;
+ wl_scan_results_t results;
+} wl_iscan_results_t;
+
+#define WL_ISCAN_RESULTS_FIXED_SIZE \
+ (WL_SCAN_RESULTS_FIXED_SIZE + OFFSETOF(wl_iscan_results_t, results))
+
+#define WL_NUMRATES 16
+typedef struct wl_rateset {
+ uint32 count;
+ uint8 rates[WL_NUMRATES];
+} wl_rateset_t;
+
+
+typedef struct wl_uint32_list {
+
+ uint32 count;
+
+ uint32 element[1];
+} wl_uint32_list_t;
+
+
+typedef struct wl_assoc_params {
+ struct ether_addr bssid;
+ uint16 bssid_cnt;
+ int32 chanspec_num;
+ chanspec_t chanspec_list[1];
+} wl_assoc_params_t;
+#define WL_ASSOC_PARAMS_FIXED_SIZE (sizeof(wl_assoc_params_t) - sizeof(chanspec_t))
+
+
+typedef wl_assoc_params_t wl_reassoc_params_t;
+#define WL_REASSOC_PARAMS_FIXED_SIZE WL_ASSOC_PARAMS_FIXED_SIZE
+
+
+typedef struct wl_join_params {
+ wlc_ssid_t ssid;
+ wl_assoc_params_t params;
+} wl_join_params_t;
+#define WL_JOIN_PARAMS_FIXED_SIZE (sizeof(wl_join_params_t) - sizeof(chanspec_t))
+
+#define WLC_CNTRY_BUF_SZ 4
+
+
+typedef enum sup_auth_status {
+
+ WLC_SUP_DISCONNECTED = 0,
+ WLC_SUP_CONNECTING,
+ WLC_SUP_IDREQUIRED,
+ WLC_SUP_AUTHENTICATING,
+ WLC_SUP_AUTHENTICATED,
+ WLC_SUP_KEYXCHANGE,
+ WLC_SUP_KEYED,
+ WLC_SUP_TIMEOUT,
+ WLC_SUP_LAST_BASIC_STATE,
+
+
+ WLC_SUP_KEYXCHANGE_WAIT_M1 = WLC_SUP_AUTHENTICATED,
+
+ WLC_SUP_KEYXCHANGE_PREP_M2 = WLC_SUP_KEYXCHANGE,
+
+ WLC_SUP_KEYXCHANGE_WAIT_M3 = WLC_SUP_LAST_BASIC_STATE,
+
+ WLC_SUP_KEYXCHANGE_PREP_M4,
+ WLC_SUP_KEYXCHANGE_WAIT_G1,
+ WLC_SUP_KEYXCHANGE_PREP_G2
+} sup_auth_status_t;
+
+
+#define CRYPTO_ALGO_OFF 0
+#define CRYPTO_ALGO_WEP1 1
+#define CRYPTO_ALGO_TKIP 2
+#define CRYPTO_ALGO_WEP128 3
+#define CRYPTO_ALGO_AES_CCM 4
+#define CRYPTO_ALGO_AES_OCB_MSDU 5
+#define CRYPTO_ALGO_AES_OCB_MPDU 6
+#define CRYPTO_ALGO_NALG 7
+#define CRYPTO_ALGO_SMS4 11
+
+#define WSEC_GEN_MIC_ERROR 0x0001
+#define WSEC_GEN_REPLAY 0x0002
+#define WSEC_GEN_ICV_ERROR 0x0004
+
+#define WL_SOFT_KEY (1 << 0)
+#define WL_PRIMARY_KEY (1 << 1)
+#define WL_KF_RES_4 (1 << 4)
+#define WL_KF_RES_5 (1 << 5)
+#define WL_IBSS_PEER_GROUP_KEY (1 << 6)
+
+typedef struct wl_wsec_key {
+ uint32 index;
+ uint32 len;
+ uint8 data[DOT11_MAX_KEY_SIZE];
+ uint32 pad_1[18];
+ uint32 algo;
+ uint32 flags;
+ uint32 pad_2[2];
+ int pad_3;
+ int iv_initialized;
+ int pad_4;
+
+ struct {
+ uint32 hi;
+ uint16 lo;
+ } rxiv;
+ uint32 pad_5[2];
+ struct ether_addr ea;
+} wl_wsec_key_t;
+
+#define WSEC_MIN_PSK_LEN 8
+#define WSEC_MAX_PSK_LEN 64
+
+
+#define WSEC_PASSPHRASE (1<<0)
+
+
+typedef struct {
+ ushort key_len;
+ ushort flags;
+ uint8 key[WSEC_MAX_PSK_LEN];
+} wsec_pmk_t;
+
+
+#define WEP_ENABLED 0x0001
+#define TKIP_ENABLED 0x0002
+#define AES_ENABLED 0x0004
+#define WSEC_SWFLAG 0x0008
+#define SES_OW_ENABLED 0x0040
+#define SMS4_ENABLED 0x0100
+
+
+#define WPA_AUTH_DISABLED 0x0000
+#define WPA_AUTH_NONE 0x0001
+#define WPA_AUTH_UNSPECIFIED 0x0002
+#define WPA_AUTH_PSK 0x0004
+
+#define WPA2_AUTH_UNSPECIFIED 0x0040
+#define WPA2_AUTH_PSK 0x0080
+#define BRCM_AUTH_PSK 0x0100
+#define BRCM_AUTH_DPT 0x0200
+#define WPA_AUTH_WAPI 0x0400
+
+#define WPA_AUTH_PFN_ANY 0xffffffff
+
+
+#define MAXPMKID 16
+
+typedef struct _pmkid {
+ struct ether_addr BSSID;
+ uint8 PMKID[WPA2_PMKID_LEN];
+} pmkid_t;
+
+typedef struct _pmkid_list {
+ uint32 npmkid;
+ pmkid_t pmkid[1];
+} pmkid_list_t;
+
+typedef struct _pmkid_cand {
+ struct ether_addr BSSID;
+ uint8 preauth;
+} pmkid_cand_t;
+
+typedef struct _pmkid_cand_list {
+ uint32 npmkid_cand;
+ pmkid_cand_t pmkid_cand[1];
+} pmkid_cand_list_t;
+
+
+
+
+typedef struct {
+ uint32 val;
+ struct ether_addr ea;
+} scb_val_t;
+
+
+
+typedef struct channel_info {
+ int hw_channel;
+ int target_channel;
+ int scan_channel;
+} channel_info_t;
+
+
+struct maclist {
+ uint count;
+ struct ether_addr ea[1];
+};
+
+
+typedef struct get_pktcnt {
+ uint rx_good_pkt;
+ uint rx_bad_pkt;
+ uint tx_good_pkt;
+ uint tx_bad_pkt;
+ uint rx_ocast_good_pkt;
+} get_pktcnt_t;
+
+
+typedef struct wl_ioctl {
+ uint cmd;
+ void *buf;
+ uint len;
+ uint8 set;
+ uint used;
+ uint needed;
+} wl_ioctl_t;
+
+
+
+#define WLC_IOCTL_MAGIC 0x14e46c77
+
+
+#define WLC_IOCTL_VERSION 1
+
+#define WLC_IOCTL_MAXLEN 8192
+#define WLC_IOCTL_SMLEN 256
+#define WLC_IOCTL_MEDLEN 1536
+
+
+
+#define WLC_GET_MAGIC 0
+#define WLC_GET_VERSION 1
+#define WLC_UP 2
+#define WLC_DOWN 3
+#define WLC_GET_LOOP 4
+#define WLC_SET_LOOP 5
+#define WLC_DUMP 6
+#define WLC_GET_MSGLEVEL 7
+#define WLC_SET_MSGLEVEL 8
+#define WLC_GET_PROMISC 9
+#define WLC_SET_PROMISC 10
+
+#define WLC_GET_RATE 12
+
+#define WLC_GET_INSTANCE 14
+
+
+
+
+#define WLC_GET_INFRA 19
+#define WLC_SET_INFRA 20
+#define WLC_GET_AUTH 21
+#define WLC_SET_AUTH 22
+#define WLC_GET_BSSID 23
+#define WLC_SET_BSSID 24
+#define WLC_GET_SSID 25
+#define WLC_SET_SSID 26
+#define WLC_RESTART 27
+
+#define WLC_GET_CHANNEL 29
+#define WLC_SET_CHANNEL 30
+#define WLC_GET_SRL 31
+#define WLC_SET_SRL 32
+#define WLC_GET_LRL 33
+#define WLC_SET_LRL 34
+#define WLC_GET_PLCPHDR 35
+#define WLC_SET_PLCPHDR 36
+#define WLC_GET_RADIO 37
+#define WLC_SET_RADIO 38
+#define WLC_GET_PHYTYPE 39
+#define WLC_DUMP_RATE 40
+#define WLC_SET_RATE_PARAMS 41
+
+
+#define WLC_GET_KEY 44
+#define WLC_SET_KEY 45
+#define WLC_GET_REGULATORY 46
+#define WLC_SET_REGULATORY 47
+#define WLC_GET_PASSIVE_SCAN 48
+#define WLC_SET_PASSIVE_SCAN 49
+#define WLC_SCAN 50
+#define WLC_SCAN_RESULTS 51
+#define WLC_DISASSOC 52
+#define WLC_REASSOC 53
+#define WLC_GET_ROAM_TRIGGER 54
+#define WLC_SET_ROAM_TRIGGER 55
+#define WLC_GET_ROAM_DELTA 56
+#define WLC_SET_ROAM_DELTA 57
+#define WLC_GET_ROAM_SCAN_PERIOD 58
+#define WLC_SET_ROAM_SCAN_PERIOD 59
+#define WLC_EVM 60
+#define WLC_GET_TXANT 61
+#define WLC_SET_TXANT 62
+#define WLC_GET_ANTDIV 63
+#define WLC_SET_ANTDIV 64
+
+
+#define WLC_GET_CLOSED 67
+#define WLC_SET_CLOSED 68
+#define WLC_GET_MACLIST 69
+#define WLC_SET_MACLIST 70
+#define WLC_GET_RATESET 71
+#define WLC_SET_RATESET 72
+
+#define WLC_LONGTRAIN 74
+#define WLC_GET_BCNPRD 75
+#define WLC_SET_BCNPRD 76
+#define WLC_GET_DTIMPRD 77
+#define WLC_SET_DTIMPRD 78
+#define WLC_GET_SROM 79
+#define WLC_SET_SROM 80
+#define WLC_GET_WEP_RESTRICT 81
+#define WLC_SET_WEP_RESTRICT 82
+#define WLC_GET_COUNTRY 83
+#define WLC_SET_COUNTRY 84
+#define WLC_GET_PM 85
+#define WLC_SET_PM 86
+#define WLC_GET_WAKE 87
+#define WLC_SET_WAKE 88
+
+#define WLC_GET_FORCELINK 90
+#define WLC_SET_FORCELINK 91
+#define WLC_FREQ_ACCURACY 92
+#define WLC_CARRIER_SUPPRESS 93
+#define WLC_GET_PHYREG 94
+#define WLC_SET_PHYREG 95
+#define WLC_GET_RADIOREG 96
+#define WLC_SET_RADIOREG 97
+#define WLC_GET_REVINFO 98
+#define WLC_GET_UCANTDIV 99
+#define WLC_SET_UCANTDIV 100
+#define WLC_R_REG 101
+#define WLC_W_REG 102
+
+
+#define WLC_GET_MACMODE 105
+#define WLC_SET_MACMODE 106
+#define WLC_GET_MONITOR 107
+#define WLC_SET_MONITOR 108
+#define WLC_GET_GMODE 109
+#define WLC_SET_GMODE 110
+#define WLC_GET_LEGACY_ERP 111
+#define WLC_SET_LEGACY_ERP 112
+#define WLC_GET_RX_ANT 113
+#define WLC_GET_CURR_RATESET 114
+#define WLC_GET_SCANSUPPRESS 115
+#define WLC_SET_SCANSUPPRESS 116
+#define WLC_GET_AP 117
+#define WLC_SET_AP 118
+#define WLC_GET_EAP_RESTRICT 119
+#define WLC_SET_EAP_RESTRICT 120
+#define WLC_SCB_AUTHORIZE 121
+#define WLC_SCB_DEAUTHORIZE 122
+#define WLC_GET_WDSLIST 123
+#define WLC_SET_WDSLIST 124
+#define WLC_GET_ATIM 125
+#define WLC_SET_ATIM 126
+#define WLC_GET_RSSI 127
+#define WLC_GET_PHYANTDIV 128
+#define WLC_SET_PHYANTDIV 129
+#define WLC_AP_RX_ONLY 130
+#define WLC_GET_TX_PATH_PWR 131
+#define WLC_SET_TX_PATH_PWR 132
+#define WLC_GET_WSEC 133
+#define WLC_SET_WSEC 134
+#define WLC_GET_PHY_NOISE 135
+#define WLC_GET_BSS_INFO 136
+#define WLC_GET_PKTCNTS 137
+#define WLC_GET_LAZYWDS 138
+#define WLC_SET_LAZYWDS 139
+#define WLC_GET_BANDLIST 140
+#define WLC_GET_BAND 141
+#define WLC_SET_BAND 142
+#define WLC_SCB_DEAUTHENTICATE 143
+#define WLC_GET_SHORTSLOT 144
+#define WLC_GET_SHORTSLOT_OVERRIDE 145
+#define WLC_SET_SHORTSLOT_OVERRIDE 146
+#define WLC_GET_SHORTSLOT_RESTRICT 147
+#define WLC_SET_SHORTSLOT_RESTRICT 148
+#define WLC_GET_GMODE_PROTECTION 149
+#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
+#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
+#define WLC_UPGRADE 152
+
+
+#define WLC_GET_IGNORE_BCNS 155
+#define WLC_SET_IGNORE_BCNS 156
+#define WLC_GET_SCB_TIMEOUT 157
+#define WLC_SET_SCB_TIMEOUT 158
+#define WLC_GET_ASSOCLIST 159
+#define WLC_GET_CLK 160
+#define WLC_SET_CLK 161
+#define WLC_GET_UP 162
+#define WLC_OUT 163
+#define WLC_GET_WPA_AUTH 164
+#define WLC_SET_WPA_AUTH 165
+#define WLC_GET_UCFLAGS 166
+#define WLC_SET_UCFLAGS 167
+#define WLC_GET_PWRIDX 168
+#define WLC_SET_PWRIDX 169
+#define WLC_GET_TSSI 170
+#define WLC_GET_SUP_RATESET_OVERRIDE 171
+#define WLC_SET_SUP_RATESET_OVERRIDE 172
+
+
+
+
+
+#define WLC_GET_PROTECTION_CONTROL 178
+#define WLC_SET_PROTECTION_CONTROL 179
+#define WLC_GET_PHYLIST 180
+#define WLC_ENCRYPT_STRENGTH 181
+#define WLC_DECRYPT_STATUS 182
+#define WLC_GET_KEY_SEQ 183
+#define WLC_GET_SCAN_CHANNEL_TIME 184
+#define WLC_SET_SCAN_CHANNEL_TIME 185
+#define WLC_GET_SCAN_UNASSOC_TIME 186
+#define WLC_SET_SCAN_UNASSOC_TIME 187
+#define WLC_GET_SCAN_HOME_TIME 188
+#define WLC_SET_SCAN_HOME_TIME 189
+#define WLC_GET_SCAN_NPROBES 190
+#define WLC_SET_SCAN_NPROBES 191
+#define WLC_GET_PRB_RESP_TIMEOUT 192
+#define WLC_SET_PRB_RESP_TIMEOUT 193
+#define WLC_GET_ATTEN 194
+#define WLC_SET_ATTEN 195
+#define WLC_GET_SHMEM 196
+#define WLC_SET_SHMEM 197
+
+
+#define WLC_SET_WSEC_TEST 200
+#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201
+#define WLC_TKIP_COUNTERMEASURES 202
+#define WLC_GET_PIOMODE 203
+#define WLC_SET_PIOMODE 204
+#define WLC_SET_ASSOC_PREFER 205
+#define WLC_GET_ASSOC_PREFER 206
+#define WLC_SET_ROAM_PREFER 207
+#define WLC_GET_ROAM_PREFER 208
+#define WLC_SET_LED 209
+#define WLC_GET_LED 210
+#define WLC_GET_INTERFERENCE_MODE 211
+#define WLC_SET_INTERFERENCE_MODE 212
+#define WLC_GET_CHANNEL_QA 213
+#define WLC_START_CHANNEL_QA 214
+#define WLC_GET_CHANNEL_SEL 215
+#define WLC_START_CHANNEL_SEL 216
+#define WLC_GET_VALID_CHANNELS 217
+#define WLC_GET_FAKEFRAG 218
+#define WLC_SET_FAKEFRAG 219
+#define WLC_GET_PWROUT_PERCENTAGE 220
+#define WLC_SET_PWROUT_PERCENTAGE 221
+#define WLC_SET_BAD_FRAME_PREEMPT 222
+#define WLC_GET_BAD_FRAME_PREEMPT 223
+#define WLC_SET_LEAP_LIST 224
+#define WLC_GET_LEAP_LIST 225
+#define WLC_GET_CWMIN 226
+#define WLC_SET_CWMIN 227
+#define WLC_GET_CWMAX 228
+#define WLC_SET_CWMAX 229
+#define WLC_GET_WET 230
+#define WLC_SET_WET 231
+#define WLC_GET_PUB 232
+
+
+#define WLC_GET_KEY_PRIMARY 235
+#define WLC_SET_KEY_PRIMARY 236
+
+#define WLC_GET_ACI_ARGS 238
+#define WLC_SET_ACI_ARGS 239
+#define WLC_UNSET_CALLBACK 240
+#define WLC_SET_CALLBACK 241
+#define WLC_GET_RADAR 242
+#define WLC_SET_RADAR 243
+#define WLC_SET_SPECT_MANAGMENT 244
+#define WLC_GET_SPECT_MANAGMENT 245
+#define WLC_WDS_GET_REMOTE_HWADDR 246
+#define WLC_WDS_GET_WPA_SUP 247
+#define WLC_SET_CS_SCAN_TIMER 248
+#define WLC_GET_CS_SCAN_TIMER 249
+#define WLC_MEASURE_REQUEST 250
+#define WLC_INIT 251
+#define WLC_SEND_QUIET 252
+#define WLC_KEEPALIVE 253
+#define WLC_SEND_PWR_CONSTRAINT 254
+#define WLC_UPGRADE_STATUS 255
+#define WLC_CURRENT_PWR 256
+#define WLC_GET_SCAN_PASSIVE_TIME 257
+#define WLC_SET_SCAN_PASSIVE_TIME 258
+#define WLC_LEGACY_LINK_BEHAVIOR 259
+#define WLC_GET_CHANNELS_IN_COUNTRY 260
+#define WLC_GET_COUNTRY_LIST 261
+#define WLC_GET_VAR 262
+#define WLC_SET_VAR 263
+#define WLC_NVRAM_GET 264
+#define WLC_NVRAM_SET 265
+#define WLC_NVRAM_DUMP 266
+#define WLC_REBOOT 267
+#define WLC_SET_WSEC_PMK 268
+#define WLC_GET_AUTH_MODE 269
+#define WLC_SET_AUTH_MODE 270
+#define WLC_GET_WAKEENTRY 271
+#define WLC_SET_WAKEENTRY 272
+#define WLC_NDCONFIG_ITEM 273
+#define WLC_NVOTPW 274
+#define WLC_OTPW 275
+#define WLC_IOV_BLOCK_GET 276
+#define WLC_IOV_MODULES_GET 277
+#define WLC_SOFT_RESET 278
+#define WLC_GET_ALLOW_MODE 279
+#define WLC_SET_ALLOW_MODE 280
+#define WLC_GET_DESIRED_BSSID 281
+#define WLC_SET_DESIRED_BSSID 282
+#define WLC_DISASSOC_MYAP 283
+#define WLC_GET_NBANDS 284
+#define WLC_GET_BANDSTATES 285
+#define WLC_GET_WLC_BSS_INFO 286
+#define WLC_GET_ASSOC_INFO 287
+#define WLC_GET_OID_PHY 288
+#define WLC_SET_OID_PHY 289
+#define WLC_SET_ASSOC_TIME 290
+#define WLC_GET_DESIRED_SSID 291
+#define WLC_GET_CHANSPEC 292
+#define WLC_GET_ASSOC_STATE 293
+#define WLC_SET_PHY_STATE 294
+#define WLC_GET_SCAN_PENDING 295
+#define WLC_GET_SCANREQ_PENDING 296
+#define WLC_GET_PREV_ROAM_REASON 297
+#define WLC_SET_PREV_ROAM_REASON 298
+#define WLC_GET_BANDSTATES_PI 299
+#define WLC_GET_PHY_STATE 300
+#define WLC_GET_BSS_WPA_RSN 301
+#define WLC_GET_BSS_WPA2_RSN 302
+#define WLC_GET_BSS_BCN_TS 303
+#define WLC_GET_INT_DISASSOC 304
+#define WLC_SET_NUM_PEERS 305
+#define WLC_GET_NUM_BSS 306
+#define WLC_LAST 307
+
+
+
+#define WL_RADIO_SW_DISABLE (1<<0)
+#define WL_RADIO_HW_DISABLE (1<<1)
+#define WL_RADIO_MPC_DISABLE (1<<2)
+#define WL_RADIO_COUNTRY_DISABLE (1<<3)
+
+
+#define WL_TXPWR_OVERRIDE (1U<<31)
+
+#define WL_PHY_PAVARS_LEN 6
+
+
+#define WL_DIAG_INTERRUPT 1
+#define WL_DIAG_LOOPBACK 2
+#define WL_DIAG_MEMORY 3
+#define WL_DIAG_LED 4
+#define WL_DIAG_REG 5
+#define WL_DIAG_SROM 6
+#define WL_DIAG_DMA 7
+
+#define WL_DIAGERR_SUCCESS 0
+#define WL_DIAGERR_FAIL_TO_RUN 1
+#define WL_DIAGERR_NOT_SUPPORTED 2
+#define WL_DIAGERR_INTERRUPT_FAIL 3
+#define WL_DIAGERR_LOOPBACK_FAIL 4
+#define WL_DIAGERR_SROM_FAIL 5
+#define WL_DIAGERR_SROM_BADCRC 6
+#define WL_DIAGERR_REG_FAIL 7
+#define WL_DIAGERR_MEMORY_FAIL 8
+#define WL_DIAGERR_NOMEM 9
+#define WL_DIAGERR_DMA_FAIL 10
+
+#define WL_DIAGERR_MEMORY_TIMEOUT 11
+#define WL_DIAGERR_MEMORY_BADPATTERN 12
+
+
+#define WLC_BAND_AUTO 0
+#define WLC_BAND_5G 1
+#define WLC_BAND_2G 2
+#define WLC_BAND_ALL 3
+
+
+#define WL_CHAN_FREQ_RANGE_2G 0
+#define WL_CHAN_FREQ_RANGE_5GL 1
+#define WL_CHAN_FREQ_RANGE_5GM 2
+#define WL_CHAN_FREQ_RANGE_5GH 3
+
+
+#define WLC_PHY_TYPE_A 0
+#define WLC_PHY_TYPE_B 1
+#define WLC_PHY_TYPE_G 2
+#define WLC_PHY_TYPE_N 4
+#define WLC_PHY_TYPE_LP 5
+#define WLC_PHY_TYPE_SSN 6
+#define WLC_PHY_TYPE_NULL 0xf
+
+
+#define WLC_MACMODE_DISABLED 0
+#define WLC_MACMODE_DENY 1
+#define WLC_MACMODE_ALLOW 2
+
+
+#define GMODE_LEGACY_B 0
+#define GMODE_AUTO 1
+#define GMODE_ONLY 2
+#define GMODE_B_DEFERRED 3
+#define GMODE_PERFORMANCE 4
+#define GMODE_LRS 5
+#define GMODE_MAX 6
+
+
+#define WLC_PLCP_AUTO -1
+#define WLC_PLCP_SHORT 0
+#define WLC_PLCP_LONG 1
+
+
+#define WLC_PROTECTION_AUTO -1
+#define WLC_PROTECTION_OFF 0
+#define WLC_PROTECTION_ON 1
+#define WLC_PROTECTION_MMHDR_ONLY 2
+#define WLC_PROTECTION_CTS_ONLY 3
+
+
+#define WLC_PROTECTION_CTL_OFF 0
+#define WLC_PROTECTION_CTL_LOCAL 1
+#define WLC_PROTECTION_CTL_OVERLAP 2
+
+
+#define WLC_N_PROTECTION_OFF 0
+#define WLC_N_PROTECTION_OPTIONAL 1
+#define WLC_N_PROTECTION_20IN40 2
+#define WLC_N_PROTECTION_MIXEDMODE 3
+
+
+#define WLC_N_PREAMBLE_MIXEDMODE 0
+#define WLC_N_PREAMBLE_GF 1
+
+
+#define WLC_N_BW_20ALL 0
+#define WLC_N_BW_40ALL 1
+#define WLC_N_BW_20IN2G_40IN5G 2
+
+
+#define WLC_N_TXRX_CHAIN0 0
+#define WLC_N_TXRX_CHAIN1 1
+
+
+#define WLC_N_SGI_20 0x01
+#define WLC_N_SGI_40 0x02
+
+
+#define PM_OFF 0
+#define PM_MAX 1
+#define PM_FAST 2
+
+#define LISTEN_INTERVAL 20
+
+#define INTERFERE_NONE 0
+#define NON_WLAN 1
+#define WLAN_MANUAL 2
+#define WLAN_AUTO 3
+#define AUTO_ACTIVE (1 << 7)
+
+typedef struct wl_aci_args {
+ int enter_aci_thresh;
+ int exit_aci_thresh;
+ int usec_spin;
+ int glitch_delay;
+ uint16 nphy_adcpwr_enter_thresh;
+ uint16 nphy_adcpwr_exit_thresh;
+ uint16 nphy_repeat_ctr;
+ uint16 nphy_num_samples;
+ uint16 nphy_undetect_window_sz;
+ uint16 nphy_b_energy_lo_aci;
+ uint16 nphy_b_energy_md_aci;
+ uint16 nphy_b_energy_hi_aci;
+} wl_aci_args_t;
+
+#define WL_ACI_ARGS_LEGACY_LENGTH 16
+
+
+
+#define WL_ERROR_VAL 0x00000001
+#define WL_TRACE_VAL 0x00000002
+#define WL_PRHDRS_VAL 0x00000004
+#define WL_PRPKT_VAL 0x00000008
+#define WL_INFORM_VAL 0x00000010
+#define WL_TMP_VAL 0x00000020
+#define WL_OID_VAL 0x00000040
+#define WL_RATE_VAL 0x00000080
+#define WL_ASSOC_VAL 0x00000100
+#define WL_PRUSR_VAL 0x00000200
+#define WL_PS_VAL 0x00000400
+#define WL_TXPWR_VAL 0x00000800
+#define WL_PORT_VAL 0x00001000
+#define WL_DUAL_VAL 0x00002000
+#define WL_WSEC_VAL 0x00004000
+#define WL_WSEC_DUMP_VAL 0x00008000
+#define WL_LOG_VAL 0x00010000
+#define WL_NRSSI_VAL 0x00020000
+#define WL_LOFT_VAL 0x00040000
+#define WL_REGULATORY_VAL 0x00080000
+#define WL_PHYCAL_VAL 0x00100000
+#define WL_RADAR_VAL 0x00200000
+#define WL_MPC_VAL 0x00400000
+#define WL_APSTA_VAL 0x00800000
+#define WL_DFS_VAL 0x01000000
+#define WL_BA_VAL 0x02000000
+#define WL_MBSS_VAL 0x04000000
+#define WL_CAC_VAL 0x08000000
+#define WL_AMSDU_VAL 0x10000000
+#define WL_AMPDU_VAL 0x20000000
+#define WL_FFPLD_VAL 0x40000000
+
+
+#define WL_DPT_VAL 0x00000001
+#define WL_SCAN_VAL 0x00000002
+#define WL_WOWL_VAL 0x00000004
+#define WL_COEX_VAL 0x00000008
+#define WL_RTDC_VAL 0x00000010
+#define WL_BTA_VAL 0x00000040
+
+
+#define WL_LED_NUMGPIO 16
+
+
+#define WL_LED_OFF 0
+#define WL_LED_ON 1
+#define WL_LED_ACTIVITY 2
+#define WL_LED_RADIO 3
+#define WL_LED_ARADIO 4
+#define WL_LED_BRADIO 5
+#define WL_LED_BGMODE 6
+#define WL_LED_WI1 7
+#define WL_LED_WI2 8
+#define WL_LED_WI3 9
+#define WL_LED_ASSOC 10
+#define WL_LED_INACTIVE 11
+#define WL_LED_ASSOCACT 12
+#define WL_LED_NUMBEHAVIOR 13
+
+
+#define WL_LED_BEH_MASK 0x7f
+#define WL_LED_AL_MASK 0x80
+
+
+#define WL_NUMCHANNELS 64
+#define WL_NUMCHANSPECS 100
+
+
+#define WL_WDS_WPA_ROLE_AUTH 0
+#define WL_WDS_WPA_ROLE_SUP 1
+#define WL_WDS_WPA_ROLE_AUTO 255
+
+
+#define WL_EVENTING_MASK_LEN 16
+
+
+#define VNDR_IE_CMD_LEN 4
+
+
+#define VNDR_IE_BEACON_FLAG 0x1
+#define VNDR_IE_PRBRSP_FLAG 0x2
+#define VNDR_IE_ASSOCRSP_FLAG 0x4
+#define VNDR_IE_AUTHRSP_FLAG 0x8
+#define VNDR_IE_PRBREQ_FLAG 0x10
+#define VNDR_IE_ASSOCREQ_FLAG 0x20
+#define VNDR_IE_CUSTOM_FLAG 0x100
+
+#define VNDR_IE_INFO_HDR_LEN (sizeof(uint32))
+
+typedef struct {
+ uint32 pktflag;
+ vndr_ie_t vndr_ie_data;
+} vndr_ie_info_t;
+
+typedef struct {
+ int iecount;
+ vndr_ie_info_t vndr_ie_list[1];
+} vndr_ie_buf_t;
+
+typedef struct {
+ char cmd[VNDR_IE_CMD_LEN];
+ vndr_ie_buf_t vndr_ie_buffer;
+} vndr_ie_setbuf_t;
+
+
+
+
+#define WL_JOIN_PREF_RSSI 1
+#define WL_JOIN_PREF_WPA 2
+#define WL_JOIN_PREF_BAND 3
+
+
+#define WLJP_BAND_ASSOC_PREF 255
+
+
+#define WL_WPA_ACP_MCS_ANY "\x00\x00\x00\x00"
+
+struct tsinfo_arg {
+ uint8 octets[3];
+};
+
+
+#define NFIFO 6
+
+#define WL_CNT_T_VERSION 5
+#define WL_CNT_EXT_T_VERSION 1
+
+typedef struct {
+ uint16 version;
+ uint16 length;
+
+
+ uint32 txframe;
+ uint32 txbyte;
+ uint32 txretrans;
+ uint32 txerror;
+ uint32 txctl;
+ uint32 txprshort;
+ uint32 txserr;
+ uint32 txnobuf;
+ uint32 txnoassoc;
+ uint32 txrunt;
+ uint32 txchit;
+ uint32 txcmiss;
+
+
+ uint32 txuflo;
+ uint32 txphyerr;
+ uint32 txphycrs;
+
+
+ uint32 rxframe;
+ uint32 rxbyte;
+ uint32 rxerror;
+ uint32 rxctl;
+ uint32 rxnobuf;
+ uint32 rxnondata;
+ uint32 rxbadds;
+ uint32 rxbadcm;
+ uint32 rxfragerr;
+ uint32 rxrunt;
+ uint32 rxgiant;
+ uint32 rxnoscb;
+ uint32 rxbadproto;
+ uint32 rxbadsrcmac;
+ uint32 rxbadda;
+ uint32 rxfilter;
+
+
+ uint32 rxoflo;
+ uint32 rxuflo[NFIFO];
+
+ uint32 d11cnt_txrts_off;
+ uint32 d11cnt_rxcrc_off;
+ uint32 d11cnt_txnocts_off;
+
+
+ uint32 dmade;
+ uint32 dmada;
+ uint32 dmape;
+ uint32 reset;
+ uint32 tbtt;
+ uint32 txdmawar;
+ uint32 pkt_callback_reg_fail;
+
+
+ uint32 txallfrm;
+ uint32 txrtsfrm;
+ uint32 txctsfrm;
+ uint32 txackfrm;
+ uint32 txdnlfrm;
+ uint32 txbcnfrm;
+ uint32 txfunfl[8];
+ uint32 txtplunfl;
+ uint32 txphyerror;
+ uint32 rxfrmtoolong;
+ uint32 rxfrmtooshrt;
+ uint32 rxinvmachdr;
+ uint32 rxbadfcs;
+ uint32 rxbadplcp;
+ uint32 rxcrsglitch;
+ uint32 rxstrt;
+ uint32 rxdfrmucastmbss;
+ uint32 rxmfrmucastmbss;
+ uint32 rxcfrmucast;
+ uint32 rxrtsucast;
+ uint32 rxctsucast;
+ uint32 rxackucast;
+ uint32 rxdfrmocast;
+ uint32 rxmfrmocast;
+ uint32 rxcfrmocast;
+ uint32 rxrtsocast;
+ uint32 rxctsocast;
+ uint32 rxdfrmmcast;
+ uint32 rxmfrmmcast;
+ uint32 rxcfrmmcast;
+ uint32 rxbeaconmbss;
+ uint32 rxdfrmucastobss;
+ uint32 rxbeaconobss;
+ uint32 rxrsptmout;
+ uint32 bcntxcancl;
+ uint32 rxf0ovfl;
+ uint32 rxf1ovfl;
+ uint32 rxf2ovfl;
+ uint32 txsfovfl;
+ uint32 pmqovfl;
+ uint32 rxcgprqfrm;
+ uint32 rxcgprsqovfl;
+ uint32 txcgprsfail;
+ uint32 txcgprssuc;
+ uint32 prs_timeout;
+ uint32 rxnack;
+ uint32 frmscons;
+ uint32 txnack;
+ uint32 txglitch_nack;
+ uint32 txburst;
+
+
+ uint32 txfrag;
+ uint32 txmulti;
+ uint32 txfail;
+ uint32 txretry;
+ uint32 txretrie;
+ uint32 rxdup;
+ uint32 txrts;
+ uint32 txnocts;
+ uint32 txnoack;
+ uint32 rxfrag;
+ uint32 rxmulti;
+ uint32 rxcrc;
+ uint32 txfrmsnt;
+ uint32 rxundec;
+
+
+ uint32 tkipmicfaill;
+ uint32 tkipcntrmsr;
+ uint32 tkipreplay;
+ uint32 ccmpfmterr;
+ uint32 ccmpreplay;
+ uint32 ccmpundec;
+ uint32 fourwayfail;
+ uint32 wepundec;
+ uint32 wepicverr;
+ uint32 decsuccess;
+ uint32 tkipicverr;
+ uint32 wepexcluded;
+
+ uint32 txchanrej;
+ uint32 psmwds;
+ uint32 phywatchdog;
+
+
+ uint32 prq_entries_handled;
+ uint32 prq_undirected_entries;
+ uint32 prq_bad_entries;
+ uint32 atim_suppress_count;
+ uint32 bcn_template_not_ready;
+ uint32 bcn_template_not_ready_done;
+ uint32 late_tbtt_dpc;
+
+
+ uint32 rx1mbps;
+ uint32 rx2mbps;
+ uint32 rx5mbps5;
+ uint32 rx6mbps;
+ uint32 rx9mbps;
+ uint32 rx11mbps;
+ uint32 rx12mbps;
+ uint32 rx18mbps;
+ uint32 rx24mbps;
+ uint32 rx36mbps;
+ uint32 rx48mbps;
+ uint32 rx54mbps;
+ uint32 rx108mbps;
+ uint32 rx162mbps;
+ uint32 rx216mbps;
+ uint32 rx270mbps;
+ uint32 rx324mbps;
+ uint32 rx378mbps;
+ uint32 rx432mbps;
+ uint32 rx486mbps;
+ uint32 rx540mbps;
+
+ uint32 pktengrxducast;
+ uint32 pktengrxdmcast;
+} wl_cnt_t;
+
+typedef struct {
+ uint16 version;
+ uint16 length;
+
+ uint32 rxampdu_sgi;
+ uint32 rxampdu_stbc;
+ uint32 rxmpdu_sgi;
+ uint32 rxmpdu_stbc;
+ uint32 rxmcs0_40M;
+ uint32 rxmcs1_40M;
+ uint32 rxmcs2_40M;
+ uint32 rxmcs3_40M;
+ uint32 rxmcs4_40M;
+ uint32 rxmcs5_40M;
+ uint32 rxmcs6_40M;
+ uint32 rxmcs7_40M;
+ uint32 rxmcs32_40M;
+
+ uint32 txfrmsnt_20Mlo;
+ uint32 txfrmsnt_20Mup;
+ uint32 txfrmsnt_40M;
+
+ uint32 rx_20ul;
+} wl_cnt_ext_t;
+
+#define WL_RXDIV_STATS_T_VERSION 1
+typedef struct {
+ uint16 version;
+ uint16 length;
+
+ uint32 rxant[4];
+} wl_rxdiv_stats_t;
+
+#define WL_DELTA_STATS_T_VERSION 1
+
+typedef struct {
+ uint16 version;
+ uint16 length;
+
+
+ uint32 txframe;
+ uint32 txbyte;
+ uint32 txretrans;
+ uint32 txfail;
+
+
+ uint32 rxframe;
+ uint32 rxbyte;
+
+
+ uint32 rx1mbps;
+ uint32 rx2mbps;
+ uint32 rx5mbps5;
+ uint32 rx6mbps;
+ uint32 rx9mbps;
+ uint32 rx11mbps;
+ uint32 rx12mbps;
+ uint32 rx18mbps;
+ uint32 rx24mbps;
+ uint32 rx36mbps;
+ uint32 rx48mbps;
+ uint32 rx54mbps;
+ uint32 rx108mbps;
+ uint32 rx162mbps;
+ uint32 rx216mbps;
+ uint32 rx270mbps;
+ uint32 rx324mbps;
+ uint32 rx378mbps;
+ uint32 rx432mbps;
+ uint32 rx486mbps;
+ uint32 rx540mbps;
+} wl_delta_stats_t;
+
+#define WL_WME_CNT_VERSION 1
+
+typedef struct {
+ uint32 packets;
+ uint32 bytes;
+} wl_traffic_stats_t;
+
+typedef struct {
+ uint16 version;
+ uint16 length;
+
+ wl_traffic_stats_t tx[AC_COUNT];
+ wl_traffic_stats_t tx_failed[AC_COUNT];
+ wl_traffic_stats_t rx[AC_COUNT];
+ wl_traffic_stats_t rx_failed[AC_COUNT];
+
+ wl_traffic_stats_t forward[AC_COUNT];
+
+ wl_traffic_stats_t tx_expired[AC_COUNT];
+
+} wl_wme_cnt_t;
+
+
+
+#define WLC_ROAM_TRIGGER_DEFAULT 0
+#define WLC_ROAM_TRIGGER_BANDWIDTH 1
+#define WLC_ROAM_TRIGGER_DISTANCE 2
+#define WLC_ROAM_TRIGGER_MAX_VALUE 2
+
+
+enum {
+ PFN_LIST_ORDER,
+ PFN_RSSI
+};
+
+enum {
+ DISABLE,
+ ENABLE
+};
+
+#define SORT_CRITERIA_BIT 0
+#define AUTO_NET_SWITCH_BIT 1
+#define ENABLE_BKGRD_SCAN_BIT 2
+#define IMMEDIATE_SCAN_BIT 3
+#define AUTO_CONNECT_BIT 4
+
+#define SORT_CRITERIA_MASK 0x01
+#define AUTO_NET_SWITCH_MASK 0x02
+#define ENABLE_BKGRD_SCAN_MASK 0x04
+#define IMMEDIATE_SCAN_MASK 0x08
+#define AUTO_CONNECT_MASK 0x10
+
+#define PFN_VERSION 1
+
+#define MAX_PFN_LIST_COUNT 16
+
+
+typedef struct wl_pfn_param {
+ int32 version;
+ int32 scan_freq;
+ int32 lost_network_timeout;
+ int16 flags;
+ int16 rssi_margin;
+} wl_pfn_param_t;
+
+typedef struct wl_pfn {
+ wlc_ssid_t ssid;
+ int32 bss_type;
+ int32 infra;
+ int32 auth;
+ uint32 wpa_auth;
+ int32 wsec;
+#ifdef WLPFN_AUTO_CONNECT
+ union {
+ wl_wsec_key_t sec_key;
+ wsec_pmk_t wpa_sec_key;
+ } pfn_security;
+#endif
+} wl_pfn_t;
+
+
+#define TOE_TX_CSUM_OL 0x00000001
+#define TOE_RX_CSUM_OL 0x00000002
+
+
+#define TOE_ERRTEST_TX_CSUM 0x00000001
+#define TOE_ERRTEST_RX_CSUM 0x00000002
+#define TOE_ERRTEST_RX_CSUM2 0x00000004
+
+struct toe_ol_stats_t {
+
+ uint32 tx_summed;
+
+
+ uint32 tx_iph_fill;
+ uint32 tx_tcp_fill;
+ uint32 tx_udp_fill;
+ uint32 tx_icmp_fill;
+
+
+ uint32 rx_iph_good;
+ uint32 rx_iph_bad;
+ uint32 rx_tcp_good;
+ uint32 rx_tcp_bad;
+ uint32 rx_udp_good;
+ uint32 rx_udp_bad;
+ uint32 rx_icmp_good;
+ uint32 rx_icmp_bad;
+
+
+ uint32 tx_tcp_errinj;
+ uint32 tx_udp_errinj;
+ uint32 tx_icmp_errinj;
+
+
+ uint32 rx_tcp_errinj;
+ uint32 rx_udp_errinj;
+ uint32 rx_icmp_errinj;
+};
+
+
+#define ARP_OL_AGENT 0x00000001
+#define ARP_OL_SNOOP 0x00000002
+#define ARP_OL_HOST_AUTO_REPLY 0x00000004
+#define ARP_OL_PEER_AUTO_REPLY 0x00000008
+
+
+#define ARP_ERRTEST_REPLY_PEER 0x1
+#define ARP_ERRTEST_REPLY_HOST 0x2
+
+#define ARP_MULTIHOMING_MAX 8
+
+
+struct arp_ol_stats_t {
+ uint32 host_ip_entries;
+ uint32 host_ip_overflow;
+
+ uint32 arp_table_entries;
+ uint32 arp_table_overflow;
+
+ uint32 host_request;
+ uint32 host_reply;
+ uint32 host_service;
+
+ uint32 peer_request;
+ uint32 peer_request_drop;
+ uint32 peer_reply;
+ uint32 peer_reply_drop;
+ uint32 peer_service;
+};
+
+
+
+
+
+typedef struct wl_keep_alive_pkt {
+ uint32 period_msec;
+ uint16 len_bytes;
+ uint8 data[1];
+} wl_keep_alive_pkt_t;
+
+#define WL_KEEP_ALIVE_FIXED_LEN OFFSETOF(wl_keep_alive_pkt_t, data)
+
+
+
+
+
+typedef enum wl_pkt_filter_type {
+ WL_PKT_FILTER_TYPE_PATTERN_MATCH
+} wl_pkt_filter_type_t;
+
+#define WL_PKT_FILTER_TYPE wl_pkt_filter_type_t
+
+
+typedef struct wl_pkt_filter_pattern {
+ uint32 offset;
+ uint32 size_bytes;
+ uint8 mask_and_pattern[1];
+} wl_pkt_filter_pattern_t;
+
+
+typedef struct wl_pkt_filter {
+ uint32 id;
+ uint32 type;
+ uint32 negate_match;
+ union {
+ wl_pkt_filter_pattern_t pattern;
+ } u;
+} wl_pkt_filter_t;
+
+#define WL_PKT_FILTER_FIXED_LEN OFFSETOF(wl_pkt_filter_t, u)
+#define WL_PKT_FILTER_PATTERN_FIXED_LEN OFFSETOF(wl_pkt_filter_pattern_t, mask_and_pattern)
+
+
+typedef struct wl_pkt_filter_enable {
+ uint32 id;
+ uint32 enable;
+} wl_pkt_filter_enable_t;
+
+
+typedef struct wl_pkt_filter_list {
+ uint32 num;
+ wl_pkt_filter_t filter[1];
+} wl_pkt_filter_list_t;
+
+#define WL_PKT_FILTER_LIST_FIXED_LEN OFFSETOF(wl_pkt_filter_list_t, filter)
+
+
+typedef struct wl_pkt_filter_stats {
+ uint32 num_pkts_matched;
+ uint32 num_pkts_forwarded;
+ uint32 num_pkts_discarded;
+} wl_pkt_filter_stats_t;
+
+
+typedef struct wl_seq_cmd_ioctl {
+ uint32 cmd;
+ uint32 len;
+} wl_seq_cmd_ioctl_t;
+
+#define WL_SEQ_CMD_ALIGN_BYTES 4
+
+
+#define WL_SEQ_CMDS_GET_IOCTL_FILTER(cmd) \
+ (((cmd) == WLC_GET_MAGIC) || \
+ ((cmd) == WLC_GET_VERSION) || \
+ ((cmd) == WLC_GET_AP) || \
+ ((cmd) == WLC_GET_INSTANCE))
+
+
+
+#define WL_PKTENG_PER_TX_START 0x01
+#define WL_PKTENG_PER_TX_STOP 0x02
+#define WL_PKTENG_PER_RX_START 0x04
+#define WL_PKTENG_PER_RX_WITH_ACK_START 0x05
+#define WL_PKTENG_PER_TX_WITH_ACK_START 0x06
+#define WL_PKTENG_PER_RX_STOP 0x08
+#define WL_PKTENG_PER_MASK 0xff
+
+#define WL_PKTENG_SYNCHRONOUS 0x100
+
+typedef struct wl_pkteng {
+ uint32 flags;
+ uint32 delay;
+ uint32 nframes;
+ uint32 length;
+ uint8 seqno;
+ struct ether_addr dest;
+ struct ether_addr src;
+} wl_pkteng_t;
+
+#define NUM_80211b_RATES 4
+#define NUM_80211ag_RATES 8
+#define NUM_80211n_RATES 32
+#define NUM_80211_RATES (NUM_80211b_RATES+NUM_80211ag_RATES+NUM_80211n_RATES)
+typedef struct wl_pkteng_stats {
+ uint32 lostfrmcnt;
+ int32 rssi;
+ int32 snr;
+ uint16 rxpktcnt[NUM_80211_RATES+1];
+} wl_pkteng_stats_t;
+
+#define WL_WOWL_MAGIC (1 << 0)
+#define WL_WOWL_NET (1 << 1)
+#define WL_WOWL_DIS (1 << 2)
+#define WL_WOWL_RETR (1 << 3)
+#define WL_WOWL_BCN (1 << 4)
+#define WL_WOWL_TST (1 << 5)
+#define WL_WOWL_BCAST (1 << 15)
+
+#define MAGIC_PKT_MINLEN 102
+
+typedef struct {
+ uint masksize;
+ uint offset;
+ uint patternoffset;
+ uint patternsize;
+
+
+} wl_wowl_pattern_t;
+
+typedef struct {
+ uint count;
+ wl_wowl_pattern_t pattern[1];
+} wl_wowl_pattern_list_t;
+
+typedef struct {
+ uint8 pci_wakeind;
+ uint16 ucode_wakeind;
+} wl_wowl_wakeind_t;
+
+
+typedef struct wl_txrate_class {
+ uint8 init_rate;
+ uint8 min_rate;
+ uint8 max_rate;
+} wl_txrate_class_t;
+
+
+
+
+#define WLC_OBSS_SCAN_PASSIVE_DWELL_DEFAULT 100
+#define WLC_OBSS_SCAN_PASSIVE_DWELL_MIN 5
+#define WLC_OBSS_SCAN_PASSIVE_DWELL_MAX 1000
+#define WLC_OBSS_SCAN_ACTIVE_DWELL_DEFAULT 20
+#define WLC_OBSS_SCAN_ACTIVE_DWELL_MIN 10
+#define WLC_OBSS_SCAN_ACTIVE_DWELL_MAX 1000
+#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_DEFAULT 300
+#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MIN 10
+#define WLC_OBSS_SCAN_WIDTHSCAN_INTERVAL_MAX 900
+#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_DEFAULT 5
+#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MIN 5
+#define WLC_OBSS_SCAN_CHANWIDTH_TRANSITION_DLY_MAX 100
+#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_DEFAULT 200
+#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MIN 200
+#define WLC_OBSS_SCAN_PASSIVE_TOTAL_PER_CHANNEL_MAX 10000
+#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_DEFAULT 20
+#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MIN 20
+#define WLC_OBSS_SCAN_ACTIVE_TOTAL_PER_CHANNEL_MAX 10000
+#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_DEFAULT 25
+#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MIN 0
+#define WLC_OBSS_SCAN_ACTIVITY_THRESHOLD_MAX 100
+
+
+typedef struct wl_obss_scan_arg {
+ int16 passive_dwell;
+ int16 active_dwell;
+ int16 bss_widthscan_interval;
+ int16 passive_total;
+ int16 active_total;
+ int16 chanwidth_transition_delay;
+ int16 activity_threshold;
+} wl_obss_scan_arg_t;
+#define WL_OBSS_SCAN_PARAM_LEN sizeof(wl_obss_scan_arg_t)
+#define WL_MIN_NUM_OBSS_SCAN_ARG 7
+
+#define WL_COEX_INFO_MASK 0x07
+#define WL_COEX_INFO_REQ 0x01
+#define WL_COEX_40MHZ_INTOLERANT 0x02
+#define WL_COEX_WIDTH20 0x04
+
+typedef struct wl_action_obss_coex_req {
+ uint8 info;
+ uint8 num;
+ uint8 ch_list[1];
+} wl_action_obss_coex_req_t;
+
+
+#define MAX_RSSI_LEVELS 8
+
+
+typedef struct wl_rssi_event {
+
+ uint32 rate_limit_msec;
+
+ uint8 num_rssi_levels;
+
+ int8 rssi_levels[MAX_RSSI_LEVELS];
+} wl_rssi_event_t;
+
+
+
+#define WLFEATURE_DISABLE_11N 0x00000001
+#define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002
+#define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004
+#define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008
+#define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010
+#define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020
+#define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040
+#define WLFEATURE_DISABLE_11N_GF 0x00000080
+
+
+
+#include <packed_section_end.h>
+
+
+#include <packed_section_start.h>
+
+
+typedef BWL_PRE_PACKED_STRUCT struct sta_prbreq_wps_ie_hdr {
+ struct ether_addr staAddr;
+ uint16 ieLen;
+} BWL_POST_PACKED_STRUCT sta_prbreq_wps_ie_hdr_t;
+
+typedef BWL_PRE_PACKED_STRUCT struct sta_prbreq_wps_ie_data {
+ sta_prbreq_wps_ie_hdr_t hdr;
+ uint8 ieData[1];
+} BWL_POST_PACKED_STRUCT sta_prbreq_wps_ie_data_t;
+
+typedef BWL_PRE_PACKED_STRUCT struct sta_prbreq_wps_ie_list {
+ uint32 totLen;
+ uint8 ieDataList[1];
+} BWL_POST_PACKED_STRUCT sta_prbreq_wps_ie_list_t;
+
+
+#include <packed_section_end.h>
+
+#endif
diff --git a/drivers/net/wireless/bcm4329/linux_osl.c b/drivers/net/wireless/bcm4329/linux_osl.c
new file mode 100644
index 0000000..d00bd1c
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/linux_osl.c
@@ -0,0 +1,622 @@
+/*
+ * Linux OS Independent Layer
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: linux_osl.c,v 1.125.12.3.8.7 2010/05/04 21:10:04 Exp $
+ */
+
+
+#define LINUX_OSL
+
+#include <typedefs.h>
+#include <bcmendian.h>
+#include <linuxver.h>
+#include <bcmdefs.h>
+#include <osl.h>
+#include <bcmutils.h>
+#include <linux/delay.h>
+#include <pcicfg.h>
+
+#define PCI_CFG_RETRY 10
+
+#define OS_HANDLE_MAGIC 0x1234abcd
+#define BCM_MEM_FILENAME_LEN 24
+
+#ifdef DHD_USE_STATIC_BUF
+#define MAX_STATIC_BUF_NUM 16
+#define STATIC_BUF_SIZE (PAGE_SIZE*2)
+#define STATIC_BUF_TOTAL_LEN (MAX_STATIC_BUF_NUM*STATIC_BUF_SIZE)
+typedef struct bcm_static_buf {
+ struct semaphore static_sem;
+ unsigned char *buf_ptr;
+ unsigned char buf_use[MAX_STATIC_BUF_NUM];
+} bcm_static_buf_t;
+
+static bcm_static_buf_t *bcm_static_buf = 0;
+
+#define MAX_STATIC_PKT_NUM 8
+typedef struct bcm_static_pkt {
+ struct sk_buff *skb_4k[MAX_STATIC_PKT_NUM];
+ struct sk_buff *skb_8k[MAX_STATIC_PKT_NUM];
+ struct semaphore osl_pkt_sem;
+ unsigned char pkt_use[MAX_STATIC_PKT_NUM*2];
+} bcm_static_pkt_t;
+static bcm_static_pkt_t *bcm_static_skb = 0;
+
+#endif
+typedef struct bcm_mem_link {
+ struct bcm_mem_link *prev;
+ struct bcm_mem_link *next;
+ uint size;
+ int line;
+ char file[BCM_MEM_FILENAME_LEN];
+} bcm_mem_link_t;
+
+struct osl_info {
+ osl_pubinfo_t pub;
+ uint magic;
+ void *pdev;
+ uint malloced;
+ uint failed;
+ uint bustype;
+ bcm_mem_link_t *dbgmem_list;
+};
+
+static int16 linuxbcmerrormap[] =
+{ 0,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -E2BIG,
+ -E2BIG,
+ -EBUSY,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EFAULT,
+ -ENOMEM,
+ -EOPNOTSUPP,
+ -EMSGSIZE,
+ -EINVAL,
+ -EPERM,
+ -ENOMEM,
+ -EINVAL,
+ -ERANGE,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EINVAL,
+ -EIO,
+ -ENODEV,
+ -EINVAL,
+ -EIO,
+ -EIO,
+ -EINVAL,
+ -EINVAL,
+
+
+
+#if BCME_LAST != -41
+#error "You need to add a OS error translation in the linuxbcmerrormap \
+ for new error code defined in bcmutils.h"
+#endif
+};
+
+
+int
+osl_error(int bcmerror)
+{
+ if (bcmerror > 0)
+ bcmerror = 0;
+ else if (bcmerror < BCME_LAST)
+ bcmerror = BCME_ERROR;
+
+
+ return linuxbcmerrormap[-bcmerror];
+}
+
+void * dhd_os_prealloc(int section, unsigned long size);
+osl_t *
+osl_attach(void *pdev, uint bustype, bool pkttag)
+{
+ osl_t *osh;
+ gfp_t flags;
+
+ flags = (in_atomic()) ? GFP_ATOMIC : GFP_KERNEL;
+ osh = kmalloc(sizeof(osl_t), flags);
+ ASSERT(osh);
+
+ bzero(osh, sizeof(osl_t));
+
+
+ ASSERT(ABS(BCME_LAST) == (ARRAYSIZE(linuxbcmerrormap) - 1));
+
+ osh->magic = OS_HANDLE_MAGIC;
+ osh->malloced = 0;
+ osh->failed = 0;
+ osh->dbgmem_list = NULL;
+ osh->pdev = pdev;
+ osh->pub.pkttag = pkttag;
+ osh->bustype = bustype;
+
+ switch (bustype) {
+ case PCI_BUS:
+ case SI_BUS:
+ case PCMCIA_BUS:
+ osh->pub.mmbus = TRUE;
+ break;
+ case JTAG_BUS:
+ case SDIO_BUS:
+ case USB_BUS:
+ case SPI_BUS:
+ osh->pub.mmbus = FALSE;
+ break;
+ default:
+ ASSERT(FALSE);
+ break;
+ }
+
+#ifdef DHD_USE_STATIC_BUF
+
+
+ if (!bcm_static_buf) {
+ if (!(bcm_static_buf = (bcm_static_buf_t *)dhd_os_prealloc(3, STATIC_BUF_SIZE+
+ STATIC_BUF_TOTAL_LEN))) {
+ printk("can not alloc static buf!\n");
+ }
+ else {
+ /* printk("alloc static buf at %x!\n", (unsigned int)bcm_static_buf); */
+ }
+
+ init_MUTEX(&bcm_static_buf->static_sem);
+
+
+ bcm_static_buf->buf_ptr = (unsigned char *)bcm_static_buf + STATIC_BUF_SIZE;
+
+ }
+
+ if (!bcm_static_skb)
+ {
+ int i;
+ void *skb_buff_ptr = 0;
+ bcm_static_skb = (bcm_static_pkt_t *)((char *)bcm_static_buf + 2048);
+ skb_buff_ptr = dhd_os_prealloc(4, 0);
+
+ bcopy(skb_buff_ptr, bcm_static_skb, sizeof(struct sk_buff *)*16);
+ for (i = 0; i < MAX_STATIC_PKT_NUM*2; i++)
+ bcm_static_skb->pkt_use[i] = 0;
+
+ init_MUTEX(&bcm_static_skb->osl_pkt_sem);
+ }
+#endif
+ return osh;
+}
+
+void
+osl_detach(osl_t *osh)
+{
+ if (osh == NULL)
+ return;
+
+#ifdef DHD_USE_STATIC_BUF
+ if (bcm_static_buf) {
+ bcm_static_buf = 0;
+ }
+ if (bcm_static_skb) {
+ bcm_static_skb = 0;
+ }
+#endif
+ ASSERT(osh->magic == OS_HANDLE_MAGIC);
+ kfree(osh);
+}
+
+
+void*
+osl_pktget(osl_t *osh, uint len)
+{
+ struct sk_buff *skb;
+
+ if ((skb = dev_alloc_skb(len))) {
+ skb_put(skb, len);
+ skb->priority = 0;
+
+
+ osh->pub.pktalloced++;
+ }
+
+ return ((void*) skb);
+}
+
+
+void
+osl_pktfree(osl_t *osh, void *p, bool send)
+{
+ struct sk_buff *skb, *nskb;
+
+ skb = (struct sk_buff*) p;
+
+ if (send && osh->pub.tx_fn)
+ osh->pub.tx_fn(osh->pub.tx_ctx, p, 0);
+
+
+ while (skb) {
+ nskb = skb->next;
+ skb->next = NULL;
+
+
+ if (skb->destructor) {
+
+ dev_kfree_skb_any(skb);
+ } else {
+
+ dev_kfree_skb(skb);
+ }
+
+ osh->pub.pktalloced--;
+
+ skb = nskb;
+ }
+}
+
+#ifdef DHD_USE_STATIC_BUF
+void*
+osl_pktget_static(osl_t *osh, uint len)
+{
+ int i = 0;
+ struct sk_buff *skb;
+
+
+ if (len > (PAGE_SIZE*2))
+ {
+ printk("Do we really need this big skb??\n");
+ return osl_pktget(osh, len);
+ }
+
+
+ down(&bcm_static_skb->osl_pkt_sem);
+ if (len <= PAGE_SIZE)
+ {
+
+ for (i = 0; i < MAX_STATIC_PKT_NUM; i++)
+ {
+ if (bcm_static_skb->pkt_use[i] == 0)
+ break;
+ }
+
+ if (i != MAX_STATIC_PKT_NUM)
+ {
+ bcm_static_skb->pkt_use[i] = 1;
+ up(&bcm_static_skb->osl_pkt_sem);
+
+ skb = bcm_static_skb->skb_4k[i];
+ skb->tail = skb->data + len;
+ skb->len = len;
+
+ return skb;
+ }
+ }
+
+
+ for (i = 0; i < MAX_STATIC_PKT_NUM; i++)
+ {
+ if (bcm_static_skb->pkt_use[i+MAX_STATIC_PKT_NUM] == 0)
+ break;
+ }
+
+ if (i != MAX_STATIC_PKT_NUM)
+ {
+ bcm_static_skb->pkt_use[i+MAX_STATIC_PKT_NUM] = 1;
+ up(&bcm_static_skb->osl_pkt_sem);
+ skb = bcm_static_skb->skb_8k[i];
+ skb->tail = skb->data + len;
+ skb->len = len;
+
+ return skb;
+ }
+
+
+
+ up(&bcm_static_skb->osl_pkt_sem);
+ printk("all static pkt in use!\n");
+ return osl_pktget(osh, len);
+}
+
+
+void
+osl_pktfree_static(osl_t *osh, void *p, bool send)
+{
+ int i;
+
+ for (i = 0; i < MAX_STATIC_PKT_NUM*2; i++)
+ {
+ if (p == bcm_static_skb->skb_4k[i])
+ {
+ down(&bcm_static_skb->osl_pkt_sem);
+ bcm_static_skb->pkt_use[i] = 0;
+ up(&bcm_static_skb->osl_pkt_sem);
+
+
+ return;
+ }
+ }
+ return osl_pktfree(osh, p, send);
+}
+#endif
+uint32
+osl_pci_read_config(osl_t *osh, uint offset, uint size)
+{
+ uint val = 0;
+ uint retry = PCI_CFG_RETRY;
+
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+
+ ASSERT(size == 4);
+
+ do {
+ pci_read_config_dword(osh->pdev, offset, &val);
+ if (val != 0xffffffff)
+ break;
+ } while (retry--);
+
+
+ return (val);
+}
+
+void
+osl_pci_write_config(osl_t *osh, uint offset, uint size, uint val)
+{
+ uint retry = PCI_CFG_RETRY;
+
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+
+ ASSERT(size == 4);
+
+ do {
+ pci_write_config_dword(osh->pdev, offset, val);
+ if (offset != PCI_BAR0_WIN)
+ break;
+ if (osl_pci_read_config(osh, offset, size) == val)
+ break;
+ } while (retry--);
+
+}
+
+
+uint
+osl_pci_bus(osl_t *osh)
+{
+ ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC) && osh->pdev);
+
+ return ((struct pci_dev *)osh->pdev)->bus->number;
+}
+
+
+uint
+osl_pci_slot(osl_t *osh)
+{
+ ASSERT(osh && (osh->magic == OS_HANDLE_MAGIC) && osh->pdev);
+
+ return PCI_SLOT(((struct pci_dev *)osh->pdev)->devfn);
+}
+
+static void
+osl_pcmcia_attr(osl_t *osh, uint offset, char *buf, int size, bool write)
+{
+}
+
+void
+osl_pcmcia_read_attr(osl_t *osh, uint offset, void *buf, int size)
+{
+ osl_pcmcia_attr(osh, offset, (char *) buf, size, FALSE);
+}
+
+void
+osl_pcmcia_write_attr(osl_t *osh, uint offset, void *buf, int size)
+{
+ osl_pcmcia_attr(osh, offset, (char *) buf, size, TRUE);
+}
+
+
+
+void*
+osl_malloc(osl_t *osh, uint size)
+{
+ void *addr;
+ gfp_t flags;
+
+ if (osh)
+ ASSERT(osh->magic == OS_HANDLE_MAGIC);
+
+#ifdef DHD_USE_STATIC_BUF
+ if (bcm_static_buf)
+ {
+ int i = 0;
+ if ((size >= PAGE_SIZE)&&(size <= STATIC_BUF_SIZE))
+ {
+ down(&bcm_static_buf->static_sem);
+
+ for (i = 0; i < MAX_STATIC_BUF_NUM; i++)
+ {
+ if (bcm_static_buf->buf_use[i] == 0)
+ break;
+ }
+
+ if (i == MAX_STATIC_BUF_NUM)
+ {
+ up(&bcm_static_buf->static_sem);
+ printk("all static buff in use!\n");
+ goto original;
+ }
+
+ bcm_static_buf->buf_use[i] = 1;
+ up(&bcm_static_buf->static_sem);
+
+ bzero(bcm_static_buf->buf_ptr+STATIC_BUF_SIZE*i, size);
+ if (osh)
+ osh->malloced += size;
+
+ return ((void *)(bcm_static_buf->buf_ptr+STATIC_BUF_SIZE*i));
+ }
+ }
+original:
+#endif
+ flags = (in_atomic()) ? GFP_ATOMIC : GFP_KERNEL;
+ if ((addr = kmalloc(size, flags)) == NULL) {
+ if (osh)
+ osh->failed++;
+ return (NULL);
+ }
+ if (osh)
+ osh->malloced += size;
+
+ return (addr);
+}
+
+void
+osl_mfree(osl_t *osh, void *addr, uint size)
+{
+#ifdef DHD_USE_STATIC_BUF
+ if (bcm_static_buf)
+ {
+ if ((addr > (void *)bcm_static_buf) && ((unsigned char *)addr
+ <= ((unsigned char *)bcm_static_buf + STATIC_BUF_TOTAL_LEN)))
+ {
+ int buf_idx = 0;
+
+ buf_idx = ((unsigned char *)addr - bcm_static_buf->buf_ptr)/STATIC_BUF_SIZE;
+
+ down(&bcm_static_buf->static_sem);
+ bcm_static_buf->buf_use[buf_idx] = 0;
+ up(&bcm_static_buf->static_sem);
+
+ if (osh) {
+ ASSERT(osh->magic == OS_HANDLE_MAGIC);
+ osh->malloced -= size;
+ }
+ return;
+ }
+ }
+#endif
+ if (osh) {
+ ASSERT(osh->magic == OS_HANDLE_MAGIC);
+ osh->malloced -= size;
+ }
+ kfree(addr);
+}
+
+uint
+osl_malloced(osl_t *osh)
+{
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ return (osh->malloced);
+}
+
+uint
+osl_malloc_failed(osl_t *osh)
+{
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ return (osh->failed);
+}
+
+void*
+osl_dma_alloc_consistent(osl_t *osh, uint size, ulong *pap)
+{
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+ return (pci_alloc_consistent(osh->pdev, size, (dma_addr_t*)pap));
+}
+
+void
+osl_dma_free_consistent(osl_t *osh, void *va, uint size, ulong pa)
+{
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+
+ pci_free_consistent(osh->pdev, size, va, (dma_addr_t)pa);
+}
+
+uint
+osl_dma_map(osl_t *osh, void *va, uint size, int direction)
+{
+ int dir;
+
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
+ return (pci_map_single(osh->pdev, va, size, dir));
+}
+
+void
+osl_dma_unmap(osl_t *osh, uint pa, uint size, int direction)
+{
+ int dir;
+
+ ASSERT((osh && (osh->magic == OS_HANDLE_MAGIC)));
+ dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
+ pci_unmap_single(osh->pdev, (uint32)pa, size, dir);
+}
+
+
+void
+osl_delay(uint usec)
+{
+ uint d;
+
+ while (usec > 0) {
+ d = MIN(usec, 1000);
+ udelay(d);
+ usec -= d;
+ }
+}
+
+
+
+void *
+osl_pktdup(osl_t *osh, void *skb)
+{
+ void * p;
+ gfp_t flags;
+
+ flags = (in_atomic()) ? GFP_ATOMIC : GFP_KERNEL;
+ if ((p = skb_clone((struct sk_buff*)skb, flags)) == NULL)
+ return NULL;
+
+
+ if (osh->pub.pkttag)
+ bzero((void*)((struct sk_buff *)p)->cb, OSL_PKTTAG_SZ);
+
+
+ osh->pub.pktalloced++;
+ return (p);
+}
diff --git a/drivers/net/wireless/bcm4329/miniopt.c b/drivers/net/wireless/bcm4329/miniopt.c
new file mode 100644
index 0000000..6a184a7
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/miniopt.c
@@ -0,0 +1,163 @@
+/*
+ * Description.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ * $Id: miniopt.c,v 1.1.6.4 2009/09/25 00:32:01 Exp $
+ */
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <typedefs.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "miniopt.h"
+
+
+/* ---- Public Variables ------------------------------------------------- */
+/* ---- Private Constants and Types -------------------------------------- */
+
+
+
+/* ---- Private Variables ------------------------------------------------ */
+/* ---- Private Function Prototypes -------------------------------------- */
+/* ---- Functions -------------------------------------------------------- */
+
+/* ----------------------------------------------------------------------- */
+void
+miniopt_init(miniopt_t *t, const char* name, const char* flags, bool longflags)
+{
+ static const char *null_flags = "";
+
+ memset(t, 0, sizeof(miniopt_t));
+ t->name = name;
+ if (flags == NULL)
+ t->flags = null_flags;
+ else
+ t->flags = flags;
+ t->longflags = longflags;
+}
+
+
+/* ----------------------------------------------------------------------- */
+int
+miniopt(miniopt_t *t, char **argv)
+{
+ int keylen;
+ char *p, *eq, *valstr, *endptr = NULL;
+ int err = 0;
+
+ t->consumed = 0;
+ t->positional = FALSE;
+ memset(t->key, 0, MINIOPT_MAXKEY);
+ t->opt = '\0';
+ t->valstr = NULL;
+ t->good_int = FALSE;
+ valstr = NULL;
+
+ if (*argv == NULL) {
+ err = -1;
+ goto exit;
+ }
+
+ p = *argv++;
+ t->consumed++;
+
+ if (!t->opt_end && !strcmp(p, "--")) {
+ t->opt_end = TRUE;
+ if (*argv == NULL) {
+ err = -1;
+ goto exit;
+ }
+ p = *argv++;
+ t->consumed++;
+ }
+
+ if (t->opt_end) {
+ t->positional = TRUE;
+ valstr = p;
+ }
+ else if (!strncmp(p, "--", 2)) {
+ eq = strchr(p, '=');
+ if (eq == NULL && !t->longflags) {
+ fprintf(stderr,
+ "%s: missing \" = \" in long param \"%s\"\n", t->name, p);
+ err = 1;
+ goto exit;
+ }
+ keylen = eq ? (eq - (p + 2)) : (int)strlen(p) - 2;
+ if (keylen > 63) keylen = 63;
+ memcpy(t->key, p + 2, keylen);
+
+ if (eq) {
+ valstr = eq + 1;
+ if (*valstr == '\0') {
+ fprintf(stderr,
+ "%s: missing value after \" = \" in long param \"%s\"\n",
+ t->name, p);
+ err = 1;
+ goto exit;
+ }
+ }
+ }
+ else if (!strncmp(p, "-", 1)) {
+ t->opt = p[1];
+ if (strlen(p) > 2) {
+ fprintf(stderr,
+ "%s: only single char options, error on param \"%s\"\n",
+ t->name, p);
+ err = 1;
+ goto exit;
+ }
+ if (strchr(t->flags, t->opt)) {
+ /* this is a flag option, no value expected */
+ valstr = NULL;
+ } else {
+ if (*argv == NULL) {
+ fprintf(stderr,
+ "%s: missing value parameter after \"%s\"\n", t->name, p);
+ err = 1;
+ goto exit;
+ }
+ valstr = *argv;
+ argv++;
+ t->consumed++;
+ }
+ } else {
+ t->positional = TRUE;
+ valstr = p;
+ }
+
+ /* parse valstr as int just in case */
+ if (valstr) {
+ t->uval = (uint)strtoul(valstr, &endptr, 0);
+ t->val = (int)t->uval;
+ t->good_int = (*endptr == '\0');
+ }
+
+ t->valstr = valstr;
+
+exit:
+ if (err == 1)
+ t->opt = '?';
+
+ return err;
+}
diff --git a/drivers/net/wireless/bcm4329/sbutils.c b/drivers/net/wireless/bcm4329/sbutils.c
new file mode 100644
index 0000000..46cd510
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/sbutils.c
@@ -0,0 +1,1004 @@
+/*
+ * Misc utility routines for accessing chip-specific features
+ * of the SiliconBackplane-based Broadcom chips.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: sbutils.c,v 1.662.4.10.2.7.4.2 2010/04/19 05:48:48 Exp $
+ */
+
+#include <typedefs.h>
+#include <bcmdefs.h>
+#include <osl.h>
+#include <bcmutils.h>
+#include <siutils.h>
+#include <bcmdevs.h>
+#include <hndsoc.h>
+#include <sbchipc.h>
+#include <pcicfg.h>
+#include <sbpcmcia.h>
+
+#include "siutils_priv.h"
+
+/* local prototypes */
+static uint _sb_coreidx(si_info_t *sii, uint32 sba);
+static uint _sb_scan(si_info_t *sii, uint32 sba, void *regs, uint bus, uint32 sbba,
+ uint ncores);
+static uint32 _sb_coresba(si_info_t *sii);
+static void *_sb_setcoreidx(si_info_t *sii, uint coreidx);
+
+#define SET_SBREG(sii, r, mask, val) \
+ W_SBREG((sii), (r), ((R_SBREG((sii), (r)) & ~(mask)) | (val)))
+#define REGS2SB(va) (sbconfig_t*) ((int8*)(va) + SBCONFIGOFF)
+
+/* sonicsrev */
+#define SONICS_2_2 (SBIDL_RV_2_2 >> SBIDL_RV_SHIFT)
+#define SONICS_2_3 (SBIDL_RV_2_3 >> SBIDL_RV_SHIFT)
+
+#define R_SBREG(sii, sbr) sb_read_sbreg((sii), (sbr))
+#define W_SBREG(sii, sbr, v) sb_write_sbreg((sii), (sbr), (v))
+#define AND_SBREG(sii, sbr, v) W_SBREG((sii), (sbr), (R_SBREG((sii), (sbr)) & (v)))
+#define OR_SBREG(sii, sbr, v) W_SBREG((sii), (sbr), (R_SBREG((sii), (sbr)) | (v)))
+
+static uint32
+sb_read_sbreg(si_info_t *sii, volatile uint32 *sbr)
+{
+ uint8 tmp;
+ uint32 val, intr_val = 0;
+
+
+ /*
+ * compact flash only has 11 bits address, while we needs 12 bits address.
+ * MEM_SEG will be OR'd with other 11 bits address in hardware,
+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
+ */
+ if (PCMCIA(sii)) {
+ INTR_OFF(sii, intr_val);
+ tmp = 1;
+ OSL_PCMCIA_WRITE_ATTR(sii->osh, MEM_SEG, &tmp, 1);
+ sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */
+ }
+
+ val = R_REG(sii->osh, sbr);
+
+ if (PCMCIA(sii)) {
+ tmp = 0;
+ OSL_PCMCIA_WRITE_ATTR(sii->osh, MEM_SEG, &tmp, 1);
+ INTR_RESTORE(sii, intr_val);
+ }
+
+ return (val);
+}
+
+static void
+sb_write_sbreg(si_info_t *sii, volatile uint32 *sbr, uint32 v)
+{
+ uint8 tmp;
+ volatile uint32 dummy;
+ uint32 intr_val = 0;
+
+
+ /*
+ * compact flash only has 11 bits address, while we needs 12 bits address.
+ * MEM_SEG will be OR'd with other 11 bits address in hardware,
+ * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
+ * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
+ */
+ if (PCMCIA(sii)) {
+ INTR_OFF(sii, intr_val);
+ tmp = 1;
+ OSL_PCMCIA_WRITE_ATTR(sii->osh, MEM_SEG, &tmp, 1);
+ sbr = (volatile uint32 *)((uintptr)sbr & ~(1 << 11)); /* mask out bit 11 */
+ }
+
+ if (BUSTYPE(sii->pub.bustype) == PCMCIA_BUS) {
+#ifdef IL_BIGENDIAN
+ dummy = R_REG(sii->osh, sbr);
+ W_REG(sii->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff));
+ dummy = R_REG(sii->osh, sbr);
+ W_REG(sii->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff));
+#else
+ dummy = R_REG(sii->osh, sbr);
+ W_REG(sii->osh, (volatile uint16 *)sbr, (uint16)(v & 0xffff));
+ dummy = R_REG(sii->osh, sbr);
+ W_REG(sii->osh, ((volatile uint16 *)sbr + 1), (uint16)((v >> 16) & 0xffff));
+#endif /* IL_BIGENDIAN */
+ } else
+ W_REG(sii->osh, sbr, v);
+
+ if (PCMCIA(sii)) {
+ tmp = 0;
+ OSL_PCMCIA_WRITE_ATTR(sii->osh, MEM_SEG, &tmp, 1);
+ INTR_RESTORE(sii, intr_val);
+ }
+}
+
+uint
+sb_coreid(si_t *sih)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+
+ sii = SI_INFO(sih);
+ sb = REGS2SB(sii->curmap);
+
+ return ((R_SBREG(sii, &sb->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
+}
+
+uint
+sb_flag(si_t *sih)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+
+ sii = SI_INFO(sih);
+ sb = REGS2SB(sii->curmap);
+
+ return R_SBREG(sii, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
+}
+
+void
+sb_setint(si_t *sih, int siflag)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+ uint32 vec;
+
+ sii = SI_INFO(sih);
+ sb = REGS2SB(sii->curmap);
+
+ if (siflag == -1)
+ vec = 0;
+ else
+ vec = 1 << siflag;
+ W_SBREG(sii, &sb->sbintvec, vec);
+}
+
+/* return core index of the core with address 'sba' */
+static uint
+_sb_coreidx(si_info_t *sii, uint32 sba)
+{
+ uint i;
+
+ for (i = 0; i < sii->numcores; i ++)
+ if (sba == sii->common_info->coresba[i])
+ return i;
+ return BADIDX;
+}
+
+/* return core address of the current core */
+static uint32
+_sb_coresba(si_info_t *sii)
+{
+ uint32 sbaddr;
+
+
+ switch (BUSTYPE(sii->pub.bustype)) {
+ case SI_BUS: {
+ sbconfig_t *sb = REGS2SB(sii->curmap);
+ sbaddr = sb_base(R_SBREG(sii, &sb->sbadmatch0));
+ break;
+ }
+
+ case PCI_BUS:
+ sbaddr = OSL_PCI_READ_CONFIG(sii->osh, PCI_BAR0_WIN, sizeof(uint32));
+ break;
+
+ case PCMCIA_BUS: {
+ uint8 tmp = 0;
+ OSL_PCMCIA_READ_ATTR(sii->osh, PCMCIA_ADDR0, &tmp, 1);
+ sbaddr = (uint32)tmp << 12;
+ OSL_PCMCIA_READ_ATTR(sii->osh, PCMCIA_ADDR1, &tmp, 1);
+ sbaddr |= (uint32)tmp << 16;
+ OSL_PCMCIA_READ_ATTR(sii->osh, PCMCIA_ADDR2, &tmp, 1);
+ sbaddr |= (uint32)tmp << 24;
+ break;
+ }
+
+ case SPI_BUS:
+ case SDIO_BUS:
+ sbaddr = (uint32)(uintptr)sii->curmap;
+ break;
+
+
+ default:
+ sbaddr = BADCOREADDR;
+ break;
+ }
+
+ return sbaddr;
+}
+
+uint
+sb_corevendor(si_t *sih)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+
+ sii = SI_INFO(sih);
+ sb = REGS2SB(sii->curmap);
+
+ return ((R_SBREG(sii, &sb->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
+}
+
+uint
+sb_corerev(si_t *sih)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+ uint sbidh;
+
+ sii = SI_INFO(sih);
+ sb = REGS2SB(sii->curmap);
+ sbidh = R_SBREG(sii, &sb->sbidhigh);
+
+ return (SBCOREREV(sbidh));
+}
+
+/* set core-specific control flags */
+void
+sb_core_cflags_wo(si_t *sih, uint32 mask, uint32 val)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+ uint32 w;
+
+ sii = SI_INFO(sih);
+ sb = REGS2SB(sii->curmap);
+
+ ASSERT((val & ~mask) == 0);
+
+ /* mask and set */
+ w = (R_SBREG(sii, &sb->sbtmstatelow) & ~(mask << SBTML_SICF_SHIFT)) |
+ (val << SBTML_SICF_SHIFT);
+ W_SBREG(sii, &sb->sbtmstatelow, w);
+}
+
+/* set/clear core-specific control flags */
+uint32
+sb_core_cflags(si_t *sih, uint32 mask, uint32 val)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+ uint32 w;
+
+ sii = SI_INFO(sih);
+ sb = REGS2SB(sii->curmap);
+
+ ASSERT((val & ~mask) == 0);
+
+ /* mask and set */
+ if (mask || val) {
+ w = (R_SBREG(sii, &sb->sbtmstatelow) & ~(mask << SBTML_SICF_SHIFT)) |
+ (val << SBTML_SICF_SHIFT);
+ W_SBREG(sii, &sb->sbtmstatelow, w);
+ }
+
+ /* return the new value
+ * for write operation, the following readback ensures the completion of write opration.
+ */
+ return (R_SBREG(sii, &sb->sbtmstatelow) >> SBTML_SICF_SHIFT);
+}
+
+/* set/clear core-specific status flags */
+uint32
+sb_core_sflags(si_t *sih, uint32 mask, uint32 val)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+ uint32 w;
+
+ sii = SI_INFO(sih);
+ sb = REGS2SB(sii->curmap);
+
+ ASSERT((val & ~mask) == 0);
+ ASSERT((mask & ~SISF_CORE_BITS) == 0);
+
+ /* mask and set */
+ if (mask || val) {
+ w = (R_SBREG(sii, &sb->sbtmstatehigh) & ~(mask << SBTMH_SISF_SHIFT)) |
+ (val << SBTMH_SISF_SHIFT);
+ W_SBREG(sii, &sb->sbtmstatehigh, w);
+ }
+
+ /* return the new value */
+ return (R_SBREG(sii, &sb->sbtmstatehigh) >> SBTMH_SISF_SHIFT);
+}
+
+bool
+sb_iscoreup(si_t *sih)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+
+ sii = SI_INFO(sih);
+ sb = REGS2SB(sii->curmap);
+
+ return ((R_SBREG(sii, &sb->sbtmstatelow) &
+ (SBTML_RESET | SBTML_REJ_MASK | (SICF_CLOCK_EN << SBTML_SICF_SHIFT))) ==
+ (SICF_CLOCK_EN << SBTML_SICF_SHIFT));
+}
+
+/*
+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
+ * switch back to the original core, and return the new value.
+ *
+ * When using the silicon backplane, no fidleing with interrupts or core switches are needed.
+ *
+ * Also, when using pci/pcie, we can optimize away the core switching for pci registers
+ * and (on newer pci cores) chipcommon registers.
+ */
+uint
+sb_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val)
+{
+ uint origidx = 0;
+ uint32 *r = NULL;
+ uint w;
+ uint intr_val = 0;
+ bool fast = FALSE;
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ ASSERT(GOODIDX(coreidx));
+ ASSERT(regoff < SI_CORE_SIZE);
+ ASSERT((val & ~mask) == 0);
+
+ if (coreidx >= SI_MAXCORES)
+ return 0;
+
+ if (BUSTYPE(sii->pub.bustype) == SI_BUS) {
+ /* If internal bus, we can always get at everything */
+ fast = TRUE;
+ /* map if does not exist */
+ if (!sii->common_info->regs[coreidx]) {
+ sii->common_info->regs[coreidx] =
+ REG_MAP(sii->common_info->coresba[coreidx], SI_CORE_SIZE);
+ ASSERT(GOODREGS(sii->common_info->regs[coreidx]));
+ }
+ r = (uint32 *)((uchar *)sii->common_info->regs[coreidx] + regoff);
+ } else if (BUSTYPE(sii->pub.bustype) == PCI_BUS) {
+ /* If pci/pcie, we can get at pci/pcie regs and on newer cores to chipc */
+
+ if ((sii->common_info->coreid[coreidx] == CC_CORE_ID) && SI_FAST(sii)) {
+ /* Chipc registers are mapped at 12KB */
+
+ fast = TRUE;
+ r = (uint32 *)((char *)sii->curmap + PCI_16KB0_CCREGS_OFFSET + regoff);
+ } else if (sii->pub.buscoreidx == coreidx) {
+ /* pci registers are at either in the last 2KB of an 8KB window
+ * or, in pcie and pci rev 13 at 8KB
+ */
+ fast = TRUE;
+ if (SI_FAST(sii))
+ r = (uint32 *)((char *)sii->curmap +
+ PCI_16KB0_PCIREGS_OFFSET + regoff);
+ else
+ r = (uint32 *)((char *)sii->curmap +
+ ((regoff >= SBCONFIGOFF) ?
+ PCI_BAR0_PCISBR_OFFSET : PCI_BAR0_PCIREGS_OFFSET) +
+ regoff);
+ }
+ }
+
+ if (!fast) {
+ INTR_OFF(sii, intr_val);
+
+ /* save current core index */
+ origidx = si_coreidx(&sii->pub);
+
+ /* switch core */
+ r = (uint32*) ((uchar*)sb_setcoreidx(&sii->pub, coreidx) + regoff);
+ }
+ ASSERT(r != NULL);
+
+ /* mask and set */
+ if (mask || val) {
+ if (regoff >= SBCONFIGOFF) {
+ w = (R_SBREG(sii, r) & ~mask) | val;
+ W_SBREG(sii, r, w);
+ } else {
+ w = (R_REG(sii->osh, r) & ~mask) | val;
+ W_REG(sii->osh, r, w);
+ }
+ }
+
+ /* readback */
+ if (regoff >= SBCONFIGOFF)
+ w = R_SBREG(sii, r);
+ else {
+ if ((CHIPID(sii->pub.chip) == BCM5354_CHIP_ID) &&
+ (coreidx == SI_CC_IDX) &&
+ (regoff == OFFSETOF(chipcregs_t, watchdog))) {
+ w = val;
+ } else
+ w = R_REG(sii->osh, r);
+ }
+
+ if (!fast) {
+ /* restore core index */
+ if (origidx != coreidx)
+ sb_setcoreidx(&sii->pub, origidx);
+
+ INTR_RESTORE(sii, intr_val);
+ }
+
+ return (w);
+}
+
+/* Scan the enumeration space to find all cores starting from the given
+ * bus 'sbba'. Append coreid and other info to the lists in 'si'. 'sba'
+ * is the default core address at chip POR time and 'regs' is the virtual
+ * address that the default core is mapped at. 'ncores' is the number of
+ * cores expected on bus 'sbba'. It returns the total number of cores
+ * starting from bus 'sbba', inclusive.
+ */
+#define SB_MAXBUSES 2
+static uint
+_sb_scan(si_info_t *sii, uint32 sba, void *regs, uint bus, uint32 sbba, uint numcores)
+{
+ uint next;
+ uint ncc = 0;
+ uint i;
+
+ if (bus >= SB_MAXBUSES) {
+ SI_ERROR(("_sb_scan: bus 0x%08x at level %d is too deep to scan\n", sbba, bus));
+ return 0;
+ }
+ SI_MSG(("_sb_scan: scan bus 0x%08x assume %u cores\n", sbba, numcores));
+
+ /* Scan all cores on the bus starting from core 0.
+ * Core addresses must be contiguous on each bus.
+ */
+ for (i = 0, next = sii->numcores; i < numcores && next < SB_BUS_MAXCORES; i++, next++) {
+ sii->common_info->coresba[next] = sbba + (i * SI_CORE_SIZE);
+
+ /* keep and reuse the initial register mapping */
+ if ((BUSTYPE(sii->pub.bustype) == SI_BUS) &&
+ (sii->common_info->coresba[next] == sba)) {
+ SI_MSG(("_sb_scan: reuse mapped regs %p for core %u\n", regs, next));
+ sii->common_info->regs[next] = regs;
+ }
+
+ /* change core to 'next' and read its coreid */
+ sii->curmap = _sb_setcoreidx(sii, next);
+ sii->curidx = next;
+
+ sii->common_info->coreid[next] = sb_coreid(&sii->pub);
+
+ /* core specific processing... */
+ /* chipc provides # cores */
+ if (sii->common_info->coreid[next] == CC_CORE_ID) {
+ chipcregs_t *cc = (chipcregs_t *)sii->curmap;
+ uint32 ccrev = sb_corerev(&sii->pub);
+
+ /* determine numcores - this is the total # cores in the chip */
+ if (((ccrev == 4) || (ccrev >= 6)))
+ numcores = (R_REG(sii->osh, &cc->chipid) & CID_CC_MASK) >>
+ CID_CC_SHIFT;
+ else {
+ /* Older chips */
+ uint chip = sii->pub.chip;
+
+ if (chip == BCM4306_CHIP_ID) /* < 4306c0 */
+ numcores = 6;
+ else if (chip == BCM4704_CHIP_ID)
+ numcores = 9;
+ else if (chip == BCM5365_CHIP_ID)
+ numcores = 7;
+ else {
+ SI_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n",
+ chip));
+ ASSERT(0);
+ numcores = 1;
+ }
+ }
+ SI_MSG(("_sb_scan: there are %u cores in the chip %s\n", numcores,
+ sii->pub.issim ? "QT" : ""));
+ }
+ /* scan bridged SB(s) and add results to the end of the list */
+ else if (sii->common_info->coreid[next] == OCP_CORE_ID) {
+ sbconfig_t *sb = REGS2SB(sii->curmap);
+ uint32 nsbba = R_SBREG(sii, &sb->sbadmatch1);
+ uint nsbcc;
+
+ sii->numcores = next + 1;
+
+ if ((nsbba & 0xfff00000) != SI_ENUM_BASE)
+ continue;
+ nsbba &= 0xfffff000;
+ if (_sb_coreidx(sii, nsbba) != BADIDX)
+ continue;
+
+ nsbcc = (R_SBREG(sii, &sb->sbtmstatehigh) & 0x000f0000) >> 16;
+ nsbcc = _sb_scan(sii, sba, regs, bus + 1, nsbba, nsbcc);
+ if (sbba == SI_ENUM_BASE)
+ numcores -= nsbcc;
+ ncc += nsbcc;
+ }
+ }
+
+ SI_MSG(("_sb_scan: found %u cores on bus 0x%08x\n", i, sbba));
+
+ sii->numcores = i + ncc;
+ return sii->numcores;
+}
+
+/* scan the sb enumerated space to identify all cores */
+void
+sb_scan(si_t *sih, void *regs, uint devid)
+{
+ si_info_t *sii;
+ uint32 origsba;
+
+ sii = SI_INFO(sih);
+
+ /* Save the current core info and validate it later till we know
+ * for sure what is good and what is bad.
+ */
+ origsba = _sb_coresba(sii);
+
+ /* scan all SB(s) starting from SI_ENUM_BASE */
+ sii->numcores = _sb_scan(sii, origsba, regs, 0, SI_ENUM_BASE, 1);
+}
+
+/*
+ * This function changes logical "focus" to the indicated core;
+ * must be called with interrupts off.
+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
+ */
+void *
+sb_setcoreidx(si_t *sih, uint coreidx)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ if (coreidx >= sii->numcores)
+ return (NULL);
+
+ /*
+ * If the user has provided an interrupt mask enabled function,
+ * then assert interrupts are disabled before switching the core.
+ */
+ ASSERT((sii->intrsenabled_fn == NULL) || !(*(sii)->intrsenabled_fn)((sii)->intr_arg));
+
+ sii->curmap = _sb_setcoreidx(sii, coreidx);
+ sii->curidx = coreidx;
+
+ return (sii->curmap);
+}
+
+/* This function changes the logical "focus" to the indicated core.
+ * Return the current core's virtual address.
+ */
+static void *
+_sb_setcoreidx(si_info_t *sii, uint coreidx)
+{
+ uint32 sbaddr = sii->common_info->coresba[coreidx];
+ void *regs;
+
+ switch (BUSTYPE(sii->pub.bustype)) {
+ case SI_BUS:
+ /* map new one */
+ if (!sii->common_info->regs[coreidx]) {
+ sii->common_info->regs[coreidx] = REG_MAP(sbaddr, SI_CORE_SIZE);
+ ASSERT(GOODREGS(sii->common_info->regs[coreidx]));
+ }
+ regs = sii->common_info->regs[coreidx];
+ break;
+
+ case PCI_BUS:
+ /* point bar0 window */
+ OSL_PCI_WRITE_CONFIG(sii->osh, PCI_BAR0_WIN, 4, sbaddr);
+ regs = sii->curmap;
+ break;
+
+ case PCMCIA_BUS: {
+ uint8 tmp = (sbaddr >> 12) & 0x0f;
+ OSL_PCMCIA_WRITE_ATTR(sii->osh, PCMCIA_ADDR0, &tmp, 1);
+ tmp = (sbaddr >> 16) & 0xff;
+ OSL_PCMCIA_WRITE_ATTR(sii->osh, PCMCIA_ADDR1, &tmp, 1);
+ tmp = (sbaddr >> 24) & 0xff;
+ OSL_PCMCIA_WRITE_ATTR(sii->osh, PCMCIA_ADDR2, &tmp, 1);
+ regs = sii->curmap;
+ break;
+ }
+ case SPI_BUS:
+ case SDIO_BUS:
+ /* map new one */
+ if (!sii->common_info->regs[coreidx]) {
+ sii->common_info->regs[coreidx] = (void *)(uintptr)sbaddr;
+ ASSERT(GOODREGS(sii->common_info->regs[coreidx]));
+ }
+ regs = sii->common_info->regs[coreidx];
+ break;
+
+
+ default:
+ ASSERT(0);
+ regs = NULL;
+ break;
+ }
+
+ return regs;
+}
+
+/* Return the address of sbadmatch0/1/2/3 register */
+static volatile uint32 *
+sb_admatch(si_info_t *sii, uint asidx)
+{
+ sbconfig_t *sb;
+ volatile uint32 *addrm;
+
+ sb = REGS2SB(sii->curmap);
+
+ switch (asidx) {
+ case 0:
+ addrm = &sb->sbadmatch0;
+ break;
+
+ case 1:
+ addrm = &sb->sbadmatch1;
+ break;
+
+ case 2:
+ addrm = &sb->sbadmatch2;
+ break;
+
+ case 3:
+ addrm = &sb->sbadmatch3;
+ break;
+
+ default:
+ SI_ERROR(("%s: Address space index (%d) out of range\n", __FUNCTION__, asidx));
+ return 0;
+ }
+
+ return (addrm);
+}
+
+/* Return the number of address spaces in current core */
+int
+sb_numaddrspaces(si_t *sih)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+
+ sii = SI_INFO(sih);
+ sb = REGS2SB(sii->curmap);
+
+ /* + 1 because of enumeration space */
+ return ((R_SBREG(sii, &sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT) + 1;
+}
+
+/* Return the address of the nth address space in the current core */
+uint32
+sb_addrspace(si_t *sih, uint asidx)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ return (sb_base(R_SBREG(sii, sb_admatch(sii, asidx))));
+}
+
+/* Return the size of the nth address space in the current core */
+uint32
+sb_addrspacesize(si_t *sih, uint asidx)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ return (sb_size(R_SBREG(sii, sb_admatch(sii, asidx))));
+}
+
+
+/* do buffered registers update */
+void
+sb_commit(si_t *sih)
+{
+ si_info_t *sii;
+ uint origidx;
+ uint intr_val = 0;
+
+ sii = SI_INFO(sih);
+
+ origidx = sii->curidx;
+ ASSERT(GOODIDX(origidx));
+
+ INTR_OFF(sii, intr_val);
+
+ /* switch over to chipcommon core if there is one, else use pci */
+ if (sii->pub.ccrev != NOREV) {
+ chipcregs_t *ccregs = (chipcregs_t *)si_setcore(sih, CC_CORE_ID, 0);
+
+ /* do the buffer registers update */
+ W_REG(sii->osh, &ccregs->broadcastaddress, SB_COMMIT);
+ W_REG(sii->osh, &ccregs->broadcastdata, 0x0);
+ } else
+ ASSERT(0);
+
+ /* restore core index */
+ sb_setcoreidx(sih, origidx);
+ INTR_RESTORE(sii, intr_val);
+}
+
+void
+sb_core_disable(si_t *sih, uint32 bits)
+{
+ si_info_t *sii;
+ volatile uint32 dummy;
+ sbconfig_t *sb;
+
+ sii = SI_INFO(sih);
+
+ ASSERT(GOODREGS(sii->curmap));
+ sb = REGS2SB(sii->curmap);
+
+ /* if core is already in reset, just return */
+ if (R_SBREG(sii, &sb->sbtmstatelow) & SBTML_RESET)
+ return;
+
+ /* if clocks are not enabled, put into reset and return */
+ if ((R_SBREG(sii, &sb->sbtmstatelow) & (SICF_CLOCK_EN << SBTML_SICF_SHIFT)) == 0)
+ goto disable;
+
+ /* set target reject and spin until busy is clear (preserve core-specific bits) */
+ OR_SBREG(sii, &sb->sbtmstatelow, SBTML_REJ);
+ dummy = R_SBREG(sii, &sb->sbtmstatelow);
+ OSL_DELAY(1);
+ SPINWAIT((R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_BUSY), 100000);
+ if (R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_BUSY)
+ SI_ERROR(("%s: target state still busy\n", __FUNCTION__));
+
+ if (R_SBREG(sii, &sb->sbidlow) & SBIDL_INIT) {
+ OR_SBREG(sii, &sb->sbimstate, SBIM_RJ);
+ dummy = R_SBREG(sii, &sb->sbimstate);
+ OSL_DELAY(1);
+ SPINWAIT((R_SBREG(sii, &sb->sbimstate) & SBIM_BY), 100000);
+ }
+
+ /* set reset and reject while enabling the clocks */
+ W_SBREG(sii, &sb->sbtmstatelow,
+ (((bits | SICF_FGC | SICF_CLOCK_EN) << SBTML_SICF_SHIFT) |
+ SBTML_REJ | SBTML_RESET));
+ dummy = R_SBREG(sii, &sb->sbtmstatelow);
+ OSL_DELAY(10);
+
+ /* don't forget to clear the initiator reject bit */
+ if (R_SBREG(sii, &sb->sbidlow) & SBIDL_INIT)
+ AND_SBREG(sii, &sb->sbimstate, ~SBIM_RJ);
+
+disable:
+ /* leave reset and reject asserted */
+ W_SBREG(sii, &sb->sbtmstatelow, ((bits << SBTML_SICF_SHIFT) | SBTML_REJ | SBTML_RESET));
+ OSL_DELAY(1);
+}
+
+/* reset and re-enable a core
+ * inputs:
+ * bits - core specific bits that are set during and after reset sequence
+ * resetbits - core specific bits that are set only during reset sequence
+ */
+void
+sb_core_reset(si_t *sih, uint32 bits, uint32 resetbits)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+ volatile uint32 dummy;
+
+ sii = SI_INFO(sih);
+ ASSERT(GOODREGS(sii->curmap));
+ sb = REGS2SB(sii->curmap);
+
+ /*
+ * Must do the disable sequence first to work for arbitrary current core state.
+ */
+ sb_core_disable(sih, (bits | resetbits));
+
+ /*
+ * Now do the initialization sequence.
+ */
+
+ /* set reset while enabling the clock and forcing them on throughout the core */
+ W_SBREG(sii, &sb->sbtmstatelow,
+ (((bits | resetbits | SICF_FGC | SICF_CLOCK_EN) << SBTML_SICF_SHIFT) |
+ SBTML_RESET));
+ dummy = R_SBREG(sii, &sb->sbtmstatelow);
+ OSL_DELAY(1);
+
+ if (R_SBREG(sii, &sb->sbtmstatehigh) & SBTMH_SERR) {
+ W_SBREG(sii, &sb->sbtmstatehigh, 0);
+ }
+ if ((dummy = R_SBREG(sii, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
+ AND_SBREG(sii, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
+ }
+
+ /* clear reset and allow it to propagate throughout the core */
+ W_SBREG(sii, &sb->sbtmstatelow,
+ ((bits | resetbits | SICF_FGC | SICF_CLOCK_EN) << SBTML_SICF_SHIFT));
+ dummy = R_SBREG(sii, &sb->sbtmstatelow);
+ OSL_DELAY(1);
+
+ /* leave clock enabled */
+ W_SBREG(sii, &sb->sbtmstatelow, ((bits | SICF_CLOCK_EN) << SBTML_SICF_SHIFT));
+ dummy = R_SBREG(sii, &sb->sbtmstatelow);
+ OSL_DELAY(1);
+}
+
+void
+sb_core_tofixup(si_t *sih)
+{
+ si_info_t *sii;
+ sbconfig_t *sb;
+
+ sii = SI_INFO(sih);
+
+ if ((BUSTYPE(sii->pub.bustype) != PCI_BUS) || PCIE(sii) ||
+ (PCI(sii) && (sii->pub.buscorerev >= 5)))
+ return;
+
+ ASSERT(GOODREGS(sii->curmap));
+ sb = REGS2SB(sii->curmap);
+
+ if (BUSTYPE(sii->pub.bustype) == SI_BUS) {
+ SET_SBREG(sii, &sb->sbimconfiglow,
+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
+ (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
+ } else {
+ if (sb_coreid(sih) == PCI_CORE_ID) {
+ SET_SBREG(sii, &sb->sbimconfiglow,
+ SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
+ (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
+ } else {
+ SET_SBREG(sii, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
+ }
+ }
+
+ sb_commit(sih);
+}
+
+/*
+ * Set the initiator timeout for the "master core".
+ * The master core is defined to be the core in control
+ * of the chip and so it issues accesses to non-memory
+ * locations (Because of dma *any* core can access memeory).
+ *
+ * The routine uses the bus to decide who is the master:
+ * SI_BUS => mips
+ * JTAG_BUS => chipc
+ * PCI_BUS => pci or pcie
+ * PCMCIA_BUS => pcmcia
+ * SDIO_BUS => pcmcia
+ *
+ * This routine exists so callers can disable initiator
+ * timeouts so accesses to very slow devices like otp
+ * won't cause an abort. The routine allows arbitrary
+ * settings of the service and request timeouts, though.
+ *
+ * Returns the timeout state before changing it or -1
+ * on error.
+ */
+
+#define TO_MASK (SBIMCL_RTO_MASK | SBIMCL_STO_MASK)
+
+uint32
+sb_set_initiator_to(si_t *sih, uint32 to, uint idx)
+{
+ si_info_t *sii;
+ uint origidx;
+ uint intr_val = 0;
+ uint32 tmp, ret = 0xffffffff;
+ sbconfig_t *sb;
+
+ sii = SI_INFO(sih);
+
+ if ((to & ~TO_MASK) != 0)
+ return ret;
+
+ /* Figure out the master core */
+ if (idx == BADIDX) {
+ switch (BUSTYPE(sii->pub.bustype)) {
+ case PCI_BUS:
+ idx = sii->pub.buscoreidx;
+ break;
+ case JTAG_BUS:
+ idx = SI_CC_IDX;
+ break;
+ case PCMCIA_BUS:
+ case SDIO_BUS:
+ idx = si_findcoreidx(sih, PCMCIA_CORE_ID, 0);
+ break;
+ case SI_BUS:
+ idx = si_findcoreidx(sih, MIPS33_CORE_ID, 0);
+ break;
+ default:
+ ASSERT(0);
+ }
+ if (idx == BADIDX)
+ return ret;
+ }
+
+ INTR_OFF(sii, intr_val);
+ origidx = si_coreidx(sih);
+
+ sb = REGS2SB(sb_setcoreidx(sih, idx));
+
+ tmp = R_SBREG(sii, &sb->sbimconfiglow);
+ ret = tmp & TO_MASK;
+ W_SBREG(sii, &sb->sbimconfiglow, (tmp & ~TO_MASK) | to);
+
+ sb_commit(sih);
+ sb_setcoreidx(sih, origidx);
+ INTR_RESTORE(sii, intr_val);
+ return ret;
+}
+
+uint32
+sb_base(uint32 admatch)
+{
+ uint32 base;
+ uint type;
+
+ type = admatch & SBAM_TYPE_MASK;
+ ASSERT(type < 3);
+
+ base = 0;
+
+ if (type == 0) {
+ base = admatch & SBAM_BASE0_MASK;
+ } else if (type == 1) {
+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
+ base = admatch & SBAM_BASE1_MASK;
+ } else if (type == 2) {
+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
+ base = admatch & SBAM_BASE2_MASK;
+ }
+
+ return (base);
+}
+
+uint32
+sb_size(uint32 admatch)
+{
+ uint32 size;
+ uint type;
+
+ type = admatch & SBAM_TYPE_MASK;
+ ASSERT(type < 3);
+
+ size = 0;
+
+ if (type == 0) {
+ size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
+ } else if (type == 1) {
+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
+ size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
+ } else if (type == 2) {
+ ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
+ size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
+ }
+
+ return (size);
+}
diff --git a/drivers/net/wireless/bcm4329/siutils.c b/drivers/net/wireless/bcm4329/siutils.c
new file mode 100644
index 0000000..1814db0
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/siutils.c
@@ -0,0 +1,1527 @@
+/*
+ * Misc utility routines for accessing chip-specific features
+ * of the SiliconBackplane-based Broadcom chips.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: siutils.c,v 1.662.4.4.4.16.4.28 2010/06/23 21:37:54 Exp $
+ */
+
+#include <typedefs.h>
+#include <bcmdefs.h>
+#include <osl.h>
+#include <bcmutils.h>
+#include <siutils.h>
+#include <bcmdevs.h>
+#include <hndsoc.h>
+#include <sbchipc.h>
+#include <pcicfg.h>
+#include <sbpcmcia.h>
+#include <sbsocram.h>
+#include <bcmsdh.h>
+#include <sdio.h>
+#include <sbsdio.h>
+#include <sbhnddma.h>
+#include <sbsdpcmdev.h>
+#include <bcmsdpcm.h>
+#include <hndpmu.h>
+
+#include "siutils_priv.h"
+
+/* local prototypes */
+static si_info_t *si_doattach(si_info_t *sii, uint devid, osl_t *osh, void *regs,
+ uint bustype, void *sdh, char **vars, uint *varsz);
+static bool si_buscore_prep(si_info_t *sii, uint bustype, uint devid, void *sdh);
+static bool si_buscore_setup(si_info_t *sii, chipcregs_t *cc, uint bustype, uint32 savewin,
+ uint *origidx, void *regs);
+
+
+/* global variable to indicate reservation/release of gpio's */
+static uint32 si_gpioreservation = 0;
+static void *common_info_alloced = NULL;
+
+/* global flag to prevent shared resources from being initialized multiple times in si_attach() */
+
+/*
+ * Allocate a si handle.
+ * devid - pci device id (used to determine chip#)
+ * osh - opaque OS handle
+ * regs - virtual address of initial core registers
+ * bustype - pci/pcmcia/sb/sdio/etc
+ * vars - pointer to a pointer area for "environment" variables
+ * varsz - pointer to int to return the size of the vars
+ */
+si_t *
+si_attach(uint devid, osl_t *osh, void *regs,
+ uint bustype, void *sdh, char **vars, uint *varsz)
+{
+ si_info_t *sii;
+
+ /* alloc si_info_t */
+ if ((sii = MALLOC(osh, sizeof (si_info_t))) == NULL) {
+ SI_ERROR(("si_attach: malloc failed! malloced %d bytes\n", MALLOCED(osh)));
+ return (NULL);
+ }
+
+ if (si_doattach(sii, devid, osh, regs, bustype, sdh, vars, varsz) == NULL) {
+ if (NULL != sii->common_info)
+ MFREE(osh, sii->common_info, sizeof(si_common_info_t));
+ MFREE(osh, sii, sizeof(si_info_t));
+ return (NULL);
+ }
+ sii->vars = vars ? *vars : NULL;
+ sii->varsz = varsz ? *varsz : 0;
+
+ return (si_t *)sii;
+}
+
+/* global kernel resource */
+static si_info_t ksii;
+
+static uint32 wd_msticks; /* watchdog timer ticks normalized to ms */
+
+/* generic kernel variant of si_attach() */
+si_t *
+si_kattach(osl_t *osh)
+{
+ static bool ksii_attached = FALSE;
+
+ if (!ksii_attached) {
+ void *regs = REG_MAP(SI_ENUM_BASE, SI_CORE_SIZE);
+
+ if (si_doattach(&ksii, BCM4710_DEVICE_ID, osh, regs,
+ SI_BUS, NULL,
+ osh != SI_OSH ? &ksii.vars : NULL,
+ osh != SI_OSH ? &ksii.varsz : NULL) == NULL) {
+ if (NULL != ksii.common_info)
+ MFREE(osh, ksii.common_info, sizeof(si_common_info_t));
+ SI_ERROR(("si_kattach: si_doattach failed\n"));
+ REG_UNMAP(regs);
+ return NULL;
+ }
+ REG_UNMAP(regs);
+
+ /* save ticks normalized to ms for si_watchdog_ms() */
+ if (PMUCTL_ENAB(&ksii.pub)) {
+ /* based on 32KHz ILP clock */
+ wd_msticks = 32;
+ } else {
+ wd_msticks = ALP_CLOCK / 1000;
+ }
+
+ ksii_attached = TRUE;
+ SI_MSG(("si_kattach done. ccrev = %d, wd_msticks = %d\n",
+ ksii.pub.ccrev, wd_msticks));
+ }
+
+ return &ksii.pub;
+}
+
+
+static bool
+si_buscore_prep(si_info_t *sii, uint bustype, uint devid, void *sdh)
+{
+ /* need to set memseg flag for CF card first before any sb registers access */
+ if (BUSTYPE(bustype) == PCMCIA_BUS)
+ sii->memseg = TRUE;
+
+
+ if (BUSTYPE(bustype) == SDIO_BUS) {
+ int err;
+ uint8 clkset;
+
+ /* Try forcing SDIO core to do ALPAvail request only */
+ clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
+ if (!err) {
+ uint8 clkval;
+
+ /* If register supported, wait for ALPAvail and then force ALP */
+ clkval = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, NULL);
+ if ((clkval & ~SBSDIO_AVBITS) == clkset) {
+ SPINWAIT(((clkval = bcmsdh_cfg_read(sdh, SDIO_FUNC_1,
+ SBSDIO_FUNC1_CHIPCLKCSR, NULL)), !SBSDIO_ALPAV(clkval)),
+ PMU_MAX_TRANSITION_DLY);
+ if (!SBSDIO_ALPAV(clkval)) {
+ SI_ERROR(("timeout on ALPAV wait, clkval 0x%02x\n",
+ clkval));
+ return FALSE;
+ }
+ clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR,
+ clkset, &err);
+ OSL_DELAY(65);
+ }
+ }
+
+ /* Also, disable the extra SDIO pull-ups */
+ bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
+ }
+
+
+ return TRUE;
+}
+
+static bool
+si_buscore_setup(si_info_t *sii, chipcregs_t *cc, uint bustype, uint32 savewin,
+ uint *origidx, void *regs)
+{
+ bool pci, pcie;
+ uint i;
+ uint pciidx, pcieidx, pcirev, pcierev;
+
+ cc = si_setcoreidx(&sii->pub, SI_CC_IDX);
+ ASSERT((uintptr)cc);
+
+ /* get chipcommon rev */
+ sii->pub.ccrev = (int)si_corerev(&sii->pub);
+
+ /* get chipcommon chipstatus */
+ if (sii->pub.ccrev >= 11)
+ sii->pub.chipst = R_REG(sii->osh, &cc->chipstatus);
+
+ /* get chipcommon capabilites */
+ sii->pub.cccaps = R_REG(sii->osh, &cc->capabilities);
+
+ /* get pmu rev and caps */
+ if (sii->pub.cccaps & CC_CAP_PMU) {
+ sii->pub.pmucaps = R_REG(sii->osh, &cc->pmucapabilities);
+ sii->pub.pmurev = sii->pub.pmucaps & PCAP_REV_MASK;
+ }
+
+ SI_MSG(("Chipc: rev %d, caps 0x%x, chipst 0x%x pmurev %d, pmucaps 0x%x\n",
+ sii->pub.ccrev, sii->pub.cccaps, sii->pub.chipst, sii->pub.pmurev,
+ sii->pub.pmucaps));
+
+ /* figure out bus/orignal core idx */
+ sii->pub.buscoretype = NODEV_CORE_ID;
+ sii->pub.buscorerev = NOREV;
+ sii->pub.buscoreidx = BADIDX;
+
+ pci = pcie = FALSE;
+ pcirev = pcierev = NOREV;
+ pciidx = pcieidx = BADIDX;
+
+ for (i = 0; i < sii->numcores; i++) {
+ uint cid, crev;
+
+ si_setcoreidx(&sii->pub, i);
+ cid = si_coreid(&sii->pub);
+ crev = si_corerev(&sii->pub);
+
+ /* Display cores found */
+ SI_MSG(("CORE[%d]: id 0x%x rev %d base 0x%x regs 0x%p\n",
+ i, cid, crev, sii->common_info->coresba[i], sii->common_info->regs[i]));
+
+ if (BUSTYPE(bustype) == PCI_BUS) {
+ if (cid == PCI_CORE_ID) {
+ pciidx = i;
+ pcirev = crev;
+ pci = TRUE;
+ } else if (cid == PCIE_CORE_ID) {
+ pcieidx = i;
+ pcierev = crev;
+ pcie = TRUE;
+ }
+ } else if ((BUSTYPE(bustype) == PCMCIA_BUS) &&
+ (cid == PCMCIA_CORE_ID)) {
+ sii->pub.buscorerev = crev;
+ sii->pub.buscoretype = cid;
+ sii->pub.buscoreidx = i;
+ }
+ else if (((BUSTYPE(bustype) == SDIO_BUS) ||
+ (BUSTYPE(bustype) == SPI_BUS)) &&
+ ((cid == PCMCIA_CORE_ID) ||
+ (cid == SDIOD_CORE_ID))) {
+ sii->pub.buscorerev = crev;
+ sii->pub.buscoretype = cid;
+ sii->pub.buscoreidx = i;
+ }
+
+ /* find the core idx before entering this func. */
+ if ((savewin && (savewin == sii->common_info->coresba[i])) ||
+ (regs == sii->common_info->regs[i]))
+ *origidx = i;
+ }
+
+
+ SI_MSG(("Buscore id/type/rev %d/0x%x/%d\n", sii->pub.buscoreidx, sii->pub.buscoretype,
+ sii->pub.buscorerev));
+
+ if (BUSTYPE(sii->pub.bustype) == SI_BUS && (CHIPID(sii->pub.chip) == BCM4712_CHIP_ID) &&
+ (sii->pub.chippkg != BCM4712LARGE_PKG_ID) && (sii->pub.chiprev <= 3))
+ OR_REG(sii->osh, &cc->slow_clk_ctl, SCC_SS_XTAL);
+
+
+ /* Make sure any on-chip ARM is off (in case strapping is wrong), or downloaded code was
+ * already running.
+ */
+ if ((BUSTYPE(bustype) == SDIO_BUS) || (BUSTYPE(bustype) == SPI_BUS)) {
+ if (si_setcore(&sii->pub, ARM7S_CORE_ID, 0) ||
+ si_setcore(&sii->pub, ARMCM3_CORE_ID, 0))
+ si_core_disable(&sii->pub, 0);
+ }
+
+ /* return to the original core */
+ si_setcoreidx(&sii->pub, *origidx);
+
+ return TRUE;
+}
+
+
+
+static si_info_t *
+si_doattach(si_info_t *sii, uint devid, osl_t *osh, void *regs,
+ uint bustype, void *sdh, char **vars, uint *varsz)
+{
+ struct si_pub *sih = &sii->pub;
+ uint32 w, savewin;
+ chipcregs_t *cc;
+ char *pvars = NULL;
+ uint origidx;
+
+ ASSERT(GOODREGS(regs));
+
+ bzero((uchar*)sii, sizeof(si_info_t));
+
+
+ {
+ if (NULL == (common_info_alloced = (void *)MALLOC(osh, sizeof(si_common_info_t)))) {
+ SI_ERROR(("si_doattach: malloc failed! malloced %dbytes\n", MALLOCED(osh)));
+ return (NULL);
+ }
+ bzero((uchar*)(common_info_alloced), sizeof(si_common_info_t));
+ }
+ sii->common_info = (si_common_info_t *)common_info_alloced;
+ sii->common_info->attach_count++;
+
+ savewin = 0;
+
+ sih->buscoreidx = BADIDX;
+
+ sii->curmap = regs;
+ sii->sdh = sdh;
+ sii->osh = osh;
+
+
+ /* find Chipcommon address */
+ if (bustype == PCI_BUS) {
+ savewin = OSL_PCI_READ_CONFIG(sii->osh, PCI_BAR0_WIN, sizeof(uint32));
+ if (!GOODCOREADDR(savewin, SI_ENUM_BASE))
+ savewin = SI_ENUM_BASE;
+ OSL_PCI_WRITE_CONFIG(sii->osh, PCI_BAR0_WIN, 4, SI_ENUM_BASE);
+ cc = (chipcregs_t *)regs;
+ } else
+ if ((bustype == SDIO_BUS) || (bustype == SPI_BUS)) {
+ cc = (chipcregs_t *)sii->curmap;
+ } else {
+ cc = (chipcregs_t *)REG_MAP(SI_ENUM_BASE, SI_CORE_SIZE);
+ }
+
+ sih->bustype = bustype;
+ if (bustype != BUSTYPE(bustype)) {
+ SI_ERROR(("si_doattach: bus type %d does not match configured bus type %d\n",
+ bustype, BUSTYPE(bustype)));
+ return NULL;
+ }
+
+ /* bus/core/clk setup for register access */
+ if (!si_buscore_prep(sii, bustype, devid, sdh)) {
+ SI_ERROR(("si_doattach: si_core_clk_prep failed %d\n", bustype));
+ return NULL;
+ }
+
+ /* ChipID recognition.
+ * We assume we can read chipid at offset 0 from the regs arg.
+ * If we add other chiptypes (or if we need to support old sdio hosts w/o chipcommon),
+ * some way of recognizing them needs to be added here.
+ */
+ w = R_REG(osh, &cc->chipid);
+ sih->socitype = (w & CID_TYPE_MASK) >> CID_TYPE_SHIFT;
+ /* Might as wll fill in chip id rev & pkg */
+ sih->chip = w & CID_ID_MASK;
+ sih->chiprev = (w & CID_REV_MASK) >> CID_REV_SHIFT;
+ sih->chippkg = (w & CID_PKG_MASK) >> CID_PKG_SHIFT;
+ if ((CHIPID(sih->chip) == BCM4329_CHIP_ID) && (sih->chippkg != BCM4329_289PIN_PKG_ID))
+ sih->chippkg = BCM4329_182PIN_PKG_ID;
+ sih->issim = IS_SIM(sih->chippkg);
+
+ /* scan for cores */
+ if (CHIPTYPE(sii->pub.socitype) == SOCI_SB) {
+ SI_MSG(("Found chip type SB (0x%08x)\n", w));
+ sb_scan(&sii->pub, regs, devid);
+ } else if (CHIPTYPE(sii->pub.socitype) == SOCI_AI) {
+ SI_MSG(("Found chip type AI (0x%08x)\n", w));
+ /* pass chipc address instead of original core base */
+ ai_scan(&sii->pub, (void *)cc, devid);
+ } else {
+ SI_ERROR(("Found chip of unkown type (0x%08x)\n", w));
+ return NULL;
+ }
+ /* no cores found, bail out */
+ if (sii->numcores == 0) {
+ SI_ERROR(("si_doattach: could not find any cores\n"));
+ return NULL;
+ }
+ /* bus/core/clk setup */
+ origidx = SI_CC_IDX;
+ if (!si_buscore_setup(sii, cc, bustype, savewin, &origidx, regs)) {
+ SI_ERROR(("si_doattach: si_buscore_setup failed\n"));
+ return NULL;
+ }
+
+ pvars = NULL;
+
+
+
+ if (sii->pub.ccrev >= 20) {
+ cc = (chipcregs_t *)si_setcore(sih, CC_CORE_ID, 0);
+ W_REG(osh, &cc->gpiopullup, 0);
+ W_REG(osh, &cc->gpiopulldown, 0);
+ si_setcoreidx(sih, origidx);
+ }
+
+ /* Skip PMU initialization from the Dongle Host.
+ * Firmware will take care of it when it comes up.
+ */
+
+
+
+ return (sii);
+}
+
+/* may be called with core in reset */
+void
+si_detach(si_t *sih)
+{
+ si_info_t *sii;
+ uint idx;
+
+ sii = SI_INFO(sih);
+
+ if (sii == NULL)
+ return;
+
+ if (BUSTYPE(sih->bustype) == SI_BUS)
+ for (idx = 0; idx < SI_MAXCORES; idx++)
+ if (sii->common_info->regs[idx]) {
+ REG_UNMAP(sii->common_info->regs[idx]);
+ sii->common_info->regs[idx] = NULL;
+ }
+
+
+ if (1 == sii->common_info->attach_count--) {
+ MFREE(sii->osh, sii->common_info, sizeof(si_common_info_t));
+ common_info_alloced = NULL;
+ }
+
+#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SI_BUS)
+ if (sii != &ksii)
+#endif /* !BCMBUSTYPE || (BCMBUSTYPE == SI_BUS) */
+ MFREE(sii->osh, sii, sizeof(si_info_t));
+}
+
+void *
+si_osh(si_t *sih)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+ return sii->osh;
+}
+
+void
+si_setosh(si_t *sih, osl_t *osh)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+ if (sii->osh != NULL) {
+ SI_ERROR(("osh is already set....\n"));
+ ASSERT(!sii->osh);
+ }
+ sii->osh = osh;
+}
+
+/* register driver interrupt disabling and restoring callback functions */
+void
+si_register_intr_callback(si_t *sih, void *intrsoff_fn, void *intrsrestore_fn,
+ void *intrsenabled_fn, void *intr_arg)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+ sii->intr_arg = intr_arg;
+ sii->intrsoff_fn = (si_intrsoff_t)intrsoff_fn;
+ sii->intrsrestore_fn = (si_intrsrestore_t)intrsrestore_fn;
+ sii->intrsenabled_fn = (si_intrsenabled_t)intrsenabled_fn;
+ /* save current core id. when this function called, the current core
+ * must be the core which provides driver functions(il, et, wl, etc.)
+ */
+ sii->dev_coreid = sii->common_info->coreid[sii->curidx];
+}
+
+void
+si_deregister_intr_callback(si_t *sih)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+ sii->intrsoff_fn = NULL;
+}
+
+uint
+si_intflag(si_t *sih)
+{
+ si_info_t *sii = SI_INFO(sih);
+ if (CHIPTYPE(sih->socitype) == SOCI_SB) {
+ sbconfig_t *ccsbr = (sbconfig_t *)((uintptr)((ulong)
+ (sii->common_info->coresba[SI_CC_IDX]) + SBCONFIGOFF));
+ return R_REG(sii->osh, &ccsbr->sbflagst);
+ } else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return R_REG(sii->osh, ((uint32 *)(uintptr)
+ (sii->common_info->oob_router + OOB_STATUSA)));
+ else {
+ ASSERT(0);
+ return 0;
+ }
+}
+
+uint
+si_flag(si_t *sih)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_flag(sih);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_flag(sih);
+ else {
+ ASSERT(0);
+ return 0;
+ }
+}
+
+void
+si_setint(si_t *sih, int siflag)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ sb_setint(sih, siflag);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ ai_setint(sih, siflag);
+ else
+ ASSERT(0);
+}
+
+uint
+si_coreid(si_t *sih)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+ return sii->common_info->coreid[sii->curidx];
+}
+
+uint
+si_coreidx(si_t *sih)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+ return sii->curidx;
+}
+
+/* return the core-type instantiation # of the current core */
+uint
+si_coreunit(si_t *sih)
+{
+ si_info_t *sii;
+ uint idx;
+ uint coreid;
+ uint coreunit;
+ uint i;
+
+ sii = SI_INFO(sih);
+ coreunit = 0;
+
+ idx = sii->curidx;
+
+ ASSERT(GOODREGS(sii->curmap));
+ coreid = si_coreid(sih);
+
+ /* count the cores of our type */
+ for (i = 0; i < idx; i++)
+ if (sii->common_info->coreid[i] == coreid)
+ coreunit++;
+
+ return (coreunit);
+}
+
+uint
+si_corevendor(si_t *sih)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_corevendor(sih);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_corevendor(sih);
+ else {
+ ASSERT(0);
+ return 0;
+ }
+}
+
+bool
+si_backplane64(si_t *sih)
+{
+ return ((sih->cccaps & CC_CAP_BKPLN64) != 0);
+}
+
+uint
+si_corerev(si_t *sih)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_corerev(sih);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_corerev(sih);
+ else {
+ ASSERT(0);
+ return 0;
+ }
+}
+
+/* return index of coreid or BADIDX if not found */
+uint
+si_findcoreidx(si_t *sih, uint coreid, uint coreunit)
+{
+ si_info_t *sii;
+ uint found;
+ uint i;
+
+ sii = SI_INFO(sih);
+
+ found = 0;
+
+ for (i = 0; i < sii->numcores; i++)
+ if (sii->common_info->coreid[i] == coreid) {
+ if (found == coreunit)
+ return (i);
+ found++;
+ }
+
+ return (BADIDX);
+}
+
+/* return list of found cores */
+uint
+si_corelist(si_t *sih, uint coreid[])
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ bcopy((uchar*)sii->common_info->coreid, (uchar*)coreid, (sii->numcores * sizeof(uint)));
+ return (sii->numcores);
+}
+
+/* return current register mapping */
+void *
+si_coreregs(si_t *sih)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+ ASSERT(GOODREGS(sii->curmap));
+
+ return (sii->curmap);
+}
+
+/*
+ * This function changes logical "focus" to the indicated core;
+ * must be called with interrupts off.
+ * Moreover, callers should keep interrupts off during switching out of and back to d11 core
+ */
+void *
+si_setcore(si_t *sih, uint coreid, uint coreunit)
+{
+ uint idx;
+
+ idx = si_findcoreidx(sih, coreid, coreunit);
+ if (!GOODIDX(idx))
+ return (NULL);
+
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_setcoreidx(sih, idx);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_setcoreidx(sih, idx);
+ else {
+ ASSERT(0);
+ return NULL;
+ }
+}
+
+void *
+si_setcoreidx(si_t *sih, uint coreidx)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_setcoreidx(sih, coreidx);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_setcoreidx(sih, coreidx);
+ else {
+ ASSERT(0);
+ return NULL;
+ }
+}
+
+/* Turn off interrupt as required by sb_setcore, before switch core */
+void *si_switch_core(si_t *sih, uint coreid, uint *origidx, uint *intr_val)
+{
+ void *cc;
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ INTR_OFF(sii, *intr_val);
+ *origidx = sii->curidx;
+ cc = si_setcore(sih, coreid, 0);
+ ASSERT(cc != NULL);
+
+ return cc;
+}
+
+/* restore coreidx and restore interrupt */
+void si_restore_core(si_t *sih, uint coreid, uint intr_val)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ si_setcoreidx(sih, coreid);
+ INTR_RESTORE(sii, intr_val);
+}
+
+int
+si_numaddrspaces(si_t *sih)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_numaddrspaces(sih);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_numaddrspaces(sih);
+ else {
+ ASSERT(0);
+ return 0;
+ }
+}
+
+uint32
+si_addrspace(si_t *sih, uint asidx)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_addrspace(sih, asidx);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_addrspace(sih, asidx);
+ else {
+ ASSERT(0);
+ return 0;
+ }
+}
+
+uint32
+si_addrspacesize(si_t *sih, uint asidx)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_addrspacesize(sih, asidx);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_addrspacesize(sih, asidx);
+ else {
+ ASSERT(0);
+ return 0;
+ }
+}
+
+uint32
+si_core_cflags(si_t *sih, uint32 mask, uint32 val)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_core_cflags(sih, mask, val);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_core_cflags(sih, mask, val);
+ else {
+ ASSERT(0);
+ return 0;
+ }
+}
+
+void
+si_core_cflags_wo(si_t *sih, uint32 mask, uint32 val)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ sb_core_cflags_wo(sih, mask, val);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ ai_core_cflags_wo(sih, mask, val);
+ else
+ ASSERT(0);
+}
+
+uint32
+si_core_sflags(si_t *sih, uint32 mask, uint32 val)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_core_sflags(sih, mask, val);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_core_sflags(sih, mask, val);
+ else {
+ ASSERT(0);
+ return 0;
+ }
+}
+
+bool
+si_iscoreup(si_t *sih)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_iscoreup(sih);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_iscoreup(sih);
+ else {
+ ASSERT(0);
+ return FALSE;
+ }
+}
+
+void
+si_write_wrapperreg(si_t *sih, uint32 offset, uint32 val)
+{
+ /* only for 4319, no requirement for SOCI_SB */
+ if (CHIPTYPE(sih->socitype) == SOCI_AI) {
+ ai_write_wrap_reg(sih, offset, val);
+ }
+ else
+ return;
+
+ return;
+}
+
+uint
+si_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ return sb_corereg(sih, coreidx, regoff, mask, val);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ return ai_corereg(sih, coreidx, regoff, mask, val);
+ else {
+ ASSERT(0);
+ return 0;
+ }
+}
+
+void
+si_core_disable(si_t *sih, uint32 bits)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ sb_core_disable(sih, bits);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ ai_core_disable(sih, bits);
+}
+
+void
+si_core_reset(si_t *sih, uint32 bits, uint32 resetbits)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ sb_core_reset(sih, bits, resetbits);
+ else if (CHIPTYPE(sih->socitype) == SOCI_AI)
+ ai_core_reset(sih, bits, resetbits);
+}
+
+void
+si_core_tofixup(si_t *sih)
+{
+ if (CHIPTYPE(sih->socitype) == SOCI_SB)
+ sb_core_tofixup(sih);
+}
+
+/* Run bist on current core. Caller needs to take care of core-specific bist hazards */
+int
+si_corebist(si_t *sih)
+{
+ uint32 cflags;
+ int result = 0;
+
+ /* Read core control flags */
+ cflags = si_core_cflags(sih, 0, 0);
+
+ /* Set bist & fgc */
+ si_core_cflags(sih, 0, (SICF_BIST_EN | SICF_FGC));
+
+ /* Wait for bist done */
+ SPINWAIT(((si_core_sflags(sih, 0, 0) & SISF_BIST_DONE) == 0), 100000);
+
+ if (si_core_sflags(sih, 0, 0) & SISF_BIST_ERROR)
+ result = BCME_ERROR;
+
+ /* Reset core control flags */
+ si_core_cflags(sih, 0xffff, cflags);
+
+ return result;
+}
+
+static uint32
+factor6(uint32 x)
+{
+ switch (x) {
+ case CC_F6_2: return 2;
+ case CC_F6_3: return 3;
+ case CC_F6_4: return 4;
+ case CC_F6_5: return 5;
+ case CC_F6_6: return 6;
+ case CC_F6_7: return 7;
+ default: return 0;
+ }
+}
+
+/* calculate the speed the SI would run at given a set of clockcontrol values */
+uint32
+si_clock_rate(uint32 pll_type, uint32 n, uint32 m)
+{
+ uint32 n1, n2, clock, m1, m2, m3, mc;
+
+ n1 = n & CN_N1_MASK;
+ n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
+
+ if (pll_type == PLL_TYPE6) {
+ if (m & CC_T6_MMASK)
+ return CC_T6_M1;
+ else
+ return CC_T6_M0;
+ } else if ((pll_type == PLL_TYPE1) ||
+ (pll_type == PLL_TYPE3) ||
+ (pll_type == PLL_TYPE4) ||
+ (pll_type == PLL_TYPE7)) {
+ n1 = factor6(n1);
+ n2 += CC_F5_BIAS;
+ } else if (pll_type == PLL_TYPE2) {
+ n1 += CC_T2_BIAS;
+ n2 += CC_T2_BIAS;
+ ASSERT((n1 >= 2) && (n1 <= 7));
+ ASSERT((n2 >= 5) && (n2 <= 23));
+ } else if (pll_type == PLL_TYPE5) {
+ return (100000000);
+ } else
+ ASSERT(0);
+ /* PLL types 3 and 7 use BASE2 (25Mhz) */
+ if ((pll_type == PLL_TYPE3) ||
+ (pll_type == PLL_TYPE7)) {
+ clock = CC_CLOCK_BASE2 * n1 * n2;
+ } else
+ clock = CC_CLOCK_BASE1 * n1 * n2;
+
+ if (clock == 0)
+ return 0;
+
+ m1 = m & CC_M1_MASK;
+ m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
+ m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
+ mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
+
+ if ((pll_type == PLL_TYPE1) ||
+ (pll_type == PLL_TYPE3) ||
+ (pll_type == PLL_TYPE4) ||
+ (pll_type == PLL_TYPE7)) {
+ m1 = factor6(m1);
+ if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE3))
+ m2 += CC_F5_BIAS;
+ else
+ m2 = factor6(m2);
+ m3 = factor6(m3);
+
+ switch (mc) {
+ case CC_MC_BYPASS: return (clock);
+ case CC_MC_M1: return (clock / m1);
+ case CC_MC_M1M2: return (clock / (m1 * m2));
+ case CC_MC_M1M2M3: return (clock / (m1 * m2 * m3));
+ case CC_MC_M1M3: return (clock / (m1 * m3));
+ default: return (0);
+ }
+ } else {
+ ASSERT(pll_type == PLL_TYPE2);
+
+ m1 += CC_T2_BIAS;
+ m2 += CC_T2M2_BIAS;
+ m3 += CC_T2_BIAS;
+ ASSERT((m1 >= 2) && (m1 <= 7));
+ ASSERT((m2 >= 3) && (m2 <= 10));
+ ASSERT((m3 >= 2) && (m3 <= 7));
+
+ if ((mc & CC_T2MC_M1BYP) == 0)
+ clock /= m1;
+ if ((mc & CC_T2MC_M2BYP) == 0)
+ clock /= m2;
+ if ((mc & CC_T2MC_M3BYP) == 0)
+ clock /= m3;
+
+ return (clock);
+ }
+}
+
+
+/* set chip watchdog reset timer to fire in 'ticks' */
+void
+si_watchdog(si_t *sih, uint ticks)
+{
+ if (PMUCTL_ENAB(sih)) {
+
+ if ((sih->chip == BCM4319_CHIP_ID) && (sih->chiprev == 0) && (ticks != 0)) {
+ si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, clk_ctl_st), ~0, 0x2);
+ si_setcore(sih, USB20D_CORE_ID, 0);
+ si_core_disable(sih, 1);
+ si_setcore(sih, CC_CORE_ID, 0);
+ }
+
+ if (ticks == 1)
+ ticks = 2;
+ si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, pmuwatchdog), ~0, ticks);
+ } else {
+ /* instant NMI */
+ si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
+ }
+}
+
+#if !defined(BCMBUSTYPE) || (BCMBUSTYPE == SI_BUS)
+/* trigger watchdog reset after ms milliseconds */
+void
+si_watchdog_ms(si_t *sih, uint32 ms)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ si_watchdog(sih, wd_msticks * ms);
+}
+#endif
+
+
+
+/* initialize the sdio core */
+void
+si_sdio_init(si_t *sih)
+{
+ si_info_t *sii = SI_INFO(sih);
+
+ if (((sih->buscoretype == PCMCIA_CORE_ID) && (sih->buscorerev >= 8)) ||
+ (sih->buscoretype == SDIOD_CORE_ID)) {
+ uint idx;
+ sdpcmd_regs_t *sdpregs;
+
+ /* get the current core index */
+ idx = sii->curidx;
+ ASSERT(idx == si_findcoreidx(sih, D11_CORE_ID, 0));
+
+ /* switch to sdio core */
+ if (!(sdpregs = (sdpcmd_regs_t *)si_setcore(sih, PCMCIA_CORE_ID, 0)))
+ sdpregs = (sdpcmd_regs_t *)si_setcore(sih, SDIOD_CORE_ID, 0);
+ ASSERT(sdpregs);
+
+ SI_MSG(("si_sdio_init: For PCMCIA/SDIO Corerev %d, enable ints from core %d "
+ "through SD core %d (%p)\n",
+ sih->buscorerev, idx, sii->curidx, sdpregs));
+
+ /* enable backplane error and core interrupts */
+ W_REG(sii->osh, &sdpregs->hostintmask, I_SBINT);
+ W_REG(sii->osh, &sdpregs->sbintmask, (I_SB_SERR | I_SB_RESPERR | (1 << idx)));
+
+ /* switch back to previous core */
+ si_setcoreidx(sih, idx);
+ }
+
+ /* enable interrupts */
+ bcmsdh_intr_enable(sii->sdh);
+
+}
+
+
+/* change logical "focus" to the gpio core for optimized access */
+void *
+si_gpiosetcore(si_t *sih)
+{
+ return (si_setcoreidx(sih, SI_CC_IDX));
+}
+
+/* mask&set gpiocontrol bits */
+uint32
+si_gpiocontrol(si_t *sih, uint32 mask, uint32 val, uint8 priority)
+{
+ uint regoff;
+
+ regoff = 0;
+
+ /* gpios could be shared on router platforms
+ * ignore reservation if it's high priority (e.g., test apps)
+ */
+ if ((priority != GPIO_HI_PRIORITY) &&
+ (BUSTYPE(sih->bustype) == SI_BUS) && (val || mask)) {
+ mask = priority ? (si_gpioreservation & mask) :
+ ((si_gpioreservation | mask) & ~(si_gpioreservation));
+ val &= mask;
+ }
+
+ regoff = OFFSETOF(chipcregs_t, gpiocontrol);
+ return (si_corereg(sih, SI_CC_IDX, regoff, mask, val));
+}
+
+/* mask&set gpio output enable bits */
+uint32
+si_gpioouten(si_t *sih, uint32 mask, uint32 val, uint8 priority)
+{
+ uint regoff;
+
+ regoff = 0;
+
+ /* gpios could be shared on router platforms
+ * ignore reservation if it's high priority (e.g., test apps)
+ */
+ if ((priority != GPIO_HI_PRIORITY) &&
+ (BUSTYPE(sih->bustype) == SI_BUS) && (val || mask)) {
+ mask = priority ? (si_gpioreservation & mask) :
+ ((si_gpioreservation | mask) & ~(si_gpioreservation));
+ val &= mask;
+ }
+
+ regoff = OFFSETOF(chipcregs_t, gpioouten);
+ return (si_corereg(sih, SI_CC_IDX, regoff, mask, val));
+}
+
+/* mask&set gpio output bits */
+uint32
+si_gpioout(si_t *sih, uint32 mask, uint32 val, uint8 priority)
+{
+ uint regoff;
+
+ regoff = 0;
+
+ /* gpios could be shared on router platforms
+ * ignore reservation if it's high priority (e.g., test apps)
+ */
+ if ((priority != GPIO_HI_PRIORITY) &&
+ (BUSTYPE(sih->bustype) == SI_BUS) && (val || mask)) {
+ mask = priority ? (si_gpioreservation & mask) :
+ ((si_gpioreservation | mask) & ~(si_gpioreservation));
+ val &= mask;
+ }
+
+ regoff = OFFSETOF(chipcregs_t, gpioout);
+ return (si_corereg(sih, SI_CC_IDX, regoff, mask, val));
+}
+
+/* reserve one gpio */
+uint32
+si_gpioreserve(si_t *sih, uint32 gpio_bitmask, uint8 priority)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ /* only cores on SI_BUS share GPIO's and only applcation users need to
+ * reserve/release GPIO
+ */
+ if ((BUSTYPE(sih->bustype) != SI_BUS) || (!priority)) {
+ ASSERT((BUSTYPE(sih->bustype) == SI_BUS) && (priority));
+ return -1;
+ }
+ /* make sure only one bit is set */
+ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
+ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
+ return -1;
+ }
+
+ /* already reserved */
+ if (si_gpioreservation & gpio_bitmask)
+ return -1;
+ /* set reservation */
+ si_gpioreservation |= gpio_bitmask;
+
+ return si_gpioreservation;
+}
+
+/* release one gpio */
+/*
+ * releasing the gpio doesn't change the current value on the GPIO last write value
+ * persists till some one overwrites it
+ */
+
+uint32
+si_gpiorelease(si_t *sih, uint32 gpio_bitmask, uint8 priority)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ /* only cores on SI_BUS share GPIO's and only applcation users need to
+ * reserve/release GPIO
+ */
+ if ((BUSTYPE(sih->bustype) != SI_BUS) || (!priority)) {
+ ASSERT((BUSTYPE(sih->bustype) == SI_BUS) && (priority));
+ return -1;
+ }
+ /* make sure only one bit is set */
+ if ((!gpio_bitmask) || ((gpio_bitmask) & (gpio_bitmask - 1))) {
+ ASSERT((gpio_bitmask) && !((gpio_bitmask) & (gpio_bitmask - 1)));
+ return -1;
+ }
+
+ /* already released */
+ if (!(si_gpioreservation & gpio_bitmask))
+ return -1;
+
+ /* clear reservation */
+ si_gpioreservation &= ~gpio_bitmask;
+
+ return si_gpioreservation;
+}
+
+/* return the current gpioin register value */
+uint32
+si_gpioin(si_t *sih)
+{
+ si_info_t *sii;
+ uint regoff;
+
+ sii = SI_INFO(sih);
+ regoff = 0;
+
+ regoff = OFFSETOF(chipcregs_t, gpioin);
+ return (si_corereg(sih, SI_CC_IDX, regoff, 0, 0));
+}
+
+/* mask&set gpio interrupt polarity bits */
+uint32
+si_gpiointpolarity(si_t *sih, uint32 mask, uint32 val, uint8 priority)
+{
+ si_info_t *sii;
+ uint regoff;
+
+ sii = SI_INFO(sih);
+ regoff = 0;
+
+ /* gpios could be shared on router platforms */
+ if ((BUSTYPE(sih->bustype) == SI_BUS) && (val || mask)) {
+ mask = priority ? (si_gpioreservation & mask) :
+ ((si_gpioreservation | mask) & ~(si_gpioreservation));
+ val &= mask;
+ }
+
+ regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
+ return (si_corereg(sih, SI_CC_IDX, regoff, mask, val));
+}
+
+/* mask&set gpio interrupt mask bits */
+uint32
+si_gpiointmask(si_t *sih, uint32 mask, uint32 val, uint8 priority)
+{
+ si_info_t *sii;
+ uint regoff;
+
+ sii = SI_INFO(sih);
+ regoff = 0;
+
+ /* gpios could be shared on router platforms */
+ if ((BUSTYPE(sih->bustype) == SI_BUS) && (val || mask)) {
+ mask = priority ? (si_gpioreservation & mask) :
+ ((si_gpioreservation | mask) & ~(si_gpioreservation));
+ val &= mask;
+ }
+
+ regoff = OFFSETOF(chipcregs_t, gpiointmask);
+ return (si_corereg(sih, SI_CC_IDX, regoff, mask, val));
+}
+
+/* assign the gpio to an led */
+uint32
+si_gpioled(si_t *sih, uint32 mask, uint32 val)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+ if (sih->ccrev < 16)
+ return -1;
+
+ /* gpio led powersave reg */
+ return (si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, gpiotimeroutmask), mask, val));
+}
+
+/* mask&set gpio timer val */
+uint32
+si_gpiotimerval(si_t *sih, uint32 mask, uint32 gpiotimerval)
+{
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ if (sih->ccrev < 16)
+ return -1;
+
+ return (si_corereg(sih, SI_CC_IDX,
+ OFFSETOF(chipcregs_t, gpiotimerval), mask, gpiotimerval));
+}
+
+uint32
+si_gpiopull(si_t *sih, bool updown, uint32 mask, uint32 val)
+{
+ si_info_t *sii;
+ uint offs;
+
+ sii = SI_INFO(sih);
+ if (sih->ccrev < 20)
+ return -1;
+
+ offs = (updown ? OFFSETOF(chipcregs_t, gpiopulldown) : OFFSETOF(chipcregs_t, gpiopullup));
+ return (si_corereg(sih, SI_CC_IDX, offs, mask, val));
+}
+
+uint32
+si_gpioevent(si_t *sih, uint regtype, uint32 mask, uint32 val)
+{
+ si_info_t *sii;
+ uint offs;
+
+ sii = SI_INFO(sih);
+ if (sih->ccrev < 11)
+ return -1;
+
+ if (regtype == GPIO_REGEVT)
+ offs = OFFSETOF(chipcregs_t, gpioevent);
+ else if (regtype == GPIO_REGEVT_INTMSK)
+ offs = OFFSETOF(chipcregs_t, gpioeventintmask);
+ else if (regtype == GPIO_REGEVT_INTPOL)
+ offs = OFFSETOF(chipcregs_t, gpioeventintpolarity);
+ else
+ return -1;
+
+ return (si_corereg(sih, SI_CC_IDX, offs, mask, val));
+}
+
+void *
+si_gpio_handler_register(si_t *sih, uint32 event,
+ bool level, gpio_handler_t cb, void *arg)
+{
+ si_info_t *sii;
+ gpioh_item_t *gi;
+
+ ASSERT(event);
+ ASSERT(cb != NULL);
+
+ sii = SI_INFO(sih);
+ if (sih->ccrev < 11)
+ return NULL;
+
+ if ((gi = MALLOC(sii->osh, sizeof(gpioh_item_t))) == NULL)
+ return NULL;
+
+ bzero(gi, sizeof(gpioh_item_t));
+ gi->event = event;
+ gi->handler = cb;
+ gi->arg = arg;
+ gi->level = level;
+
+ gi->next = sii->gpioh_head;
+ sii->gpioh_head = gi;
+
+ return (void *)(gi);
+}
+
+void
+si_gpio_handler_unregister(si_t *sih, void *gpioh)
+{
+ si_info_t *sii;
+ gpioh_item_t *p, *n;
+
+ sii = SI_INFO(sih);
+ if (sih->ccrev < 11)
+ return;
+
+ ASSERT(sii->gpioh_head != NULL);
+ if ((void*)sii->gpioh_head == gpioh) {
+ sii->gpioh_head = sii->gpioh_head->next;
+ MFREE(sii->osh, gpioh, sizeof(gpioh_item_t));
+ return;
+ } else {
+ p = sii->gpioh_head;
+ n = p->next;
+ while (n) {
+ if ((void*)n == gpioh) {
+ p->next = n->next;
+ MFREE(sii->osh, gpioh, sizeof(gpioh_item_t));
+ return;
+ }
+ p = n;
+ n = n->next;
+ }
+ }
+
+ ASSERT(0); /* Not found in list */
+}
+
+void
+si_gpio_handler_process(si_t *sih)
+{
+ si_info_t *sii;
+ gpioh_item_t *h;
+ uint32 status;
+ uint32 level = si_gpioin(sih);
+ uint32 edge = si_gpioevent(sih, GPIO_REGEVT, 0, 0);
+
+ sii = SI_INFO(sih);
+ for (h = sii->gpioh_head; h != NULL; h = h->next) {
+ if (h->handler) {
+ status = (h->level ? level : edge);
+
+ if (status & h->event)
+ h->handler(status, h->arg);
+ }
+ }
+
+ si_gpioevent(sih, GPIO_REGEVT, edge, edge); /* clear edge-trigger status */
+}
+
+uint32
+si_gpio_int_enable(si_t *sih, bool enable)
+{
+ si_info_t *sii;
+ uint offs;
+
+ sii = SI_INFO(sih);
+ if (sih->ccrev < 11)
+ return -1;
+
+ offs = OFFSETOF(chipcregs_t, intmask);
+ return (si_corereg(sih, SI_CC_IDX, offs, CI_GPIO, (enable ? CI_GPIO : 0)));
+}
+
+
+/* Return the RAM size of the SOCRAM core */
+uint32
+si_socram_size(si_t *sih)
+{
+ si_info_t *sii;
+ uint origidx;
+ uint intr_val = 0;
+
+ sbsocramregs_t *regs;
+ bool wasup;
+ uint corerev;
+ uint32 coreinfo;
+ uint memsize = 0;
+
+ sii = SI_INFO(sih);
+
+ /* Block ints and save current core */
+ INTR_OFF(sii, intr_val);
+ origidx = si_coreidx(sih);
+
+ /* Switch to SOCRAM core */
+ if (!(regs = si_setcore(sih, SOCRAM_CORE_ID, 0)))
+ goto done;
+
+ /* Get info for determining size */
+ if (!(wasup = si_iscoreup(sih)))
+ si_core_reset(sih, 0, 0);
+ corerev = si_corerev(sih);
+ coreinfo = R_REG(sii->osh, ®s->coreinfo);
+
+ /* Calculate size from coreinfo based on rev */
+ if (corerev == 0)
+ memsize = 1 << (16 + (coreinfo & SRCI_MS0_MASK));
+ else if (corerev < 3) {
+ memsize = 1 << (SR_BSZ_BASE + (coreinfo & SRCI_SRBSZ_MASK));
+ memsize *= (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
+ } else {
+ uint nb = (coreinfo & SRCI_SRNB_MASK) >> SRCI_SRNB_SHIFT;
+ uint bsz = (coreinfo & SRCI_SRBSZ_MASK);
+ uint lss = (coreinfo & SRCI_LSS_MASK) >> SRCI_LSS_SHIFT;
+ if (lss != 0)
+ nb --;
+ memsize = nb * (1 << (bsz + SR_BSZ_BASE));
+ if (lss != 0)
+ memsize += (1 << ((lss - 1) + SR_BSZ_BASE));
+ }
+
+ /* Return to previous state and core */
+ if (!wasup)
+ si_core_disable(sih, 0);
+ si_setcoreidx(sih, origidx);
+
+done:
+ INTR_RESTORE(sii, intr_val);
+
+ return memsize;
+}
+
+
+void
+si_btcgpiowar(si_t *sih)
+{
+ si_info_t *sii;
+ uint origidx;
+ uint intr_val = 0;
+ chipcregs_t *cc;
+
+ sii = SI_INFO(sih);
+
+ /* Make sure that there is ChipCommon core present &&
+ * UART_TX is strapped to 1
+ */
+ if (!(sih->cccaps & CC_CAP_UARTGPIO))
+ return;
+
+ /* si_corereg cannot be used as we have to guarantee 8-bit read/writes */
+ INTR_OFF(sii, intr_val);
+
+ origidx = si_coreidx(sih);
+
+ cc = (chipcregs_t *)si_setcore(sih, CC_CORE_ID, 0);
+ ASSERT(cc != NULL);
+
+ W_REG(sii->osh, &cc->uart0mcr, R_REG(sii->osh, &cc->uart0mcr) | 0x04);
+
+ /* restore the original index */
+ si_setcoreidx(sih, origidx);
+
+ INTR_RESTORE(sii, intr_val);
+}
+
+/* check if the device is removed */
+bool
+si_deviceremoved(si_t *sih)
+{
+ uint32 w;
+ si_info_t *sii;
+
+ sii = SI_INFO(sih);
+
+ switch (BUSTYPE(sih->bustype)) {
+ case PCI_BUS:
+ ASSERT(sii->osh != NULL);
+ w = OSL_PCI_READ_CONFIG(sii->osh, PCI_CFG_VID, sizeof(uint32));
+ if ((w & 0xFFFF) != VENDOR_BROADCOM)
+ return TRUE;
+ else
+ return FALSE;
+ default:
+ return FALSE;
+ }
+ return FALSE;
+}
diff --git a/drivers/net/wireless/bcm4329/siutils_priv.h b/drivers/net/wireless/bcm4329/siutils_priv.h
new file mode 100644
index 0000000..e8ad7e5
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/siutils_priv.h
@@ -0,0 +1,213 @@
+/*
+ * Include file private to the SOC Interconnect support files.
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: siutils_priv.h,v 1.3.10.5.4.2 2009/09/22 13:28:16 Exp $
+ */
+
+#ifndef _siutils_priv_h_
+#define _siutils_priv_h_
+
+/* debug/trace */
+#define SI_ERROR(args)
+
+#define SI_MSG(args)
+
+#define IS_SIM(chippkg) ((chippkg == HDLSIM_PKG_ID) || (chippkg == HWSIM_PKG_ID))
+
+typedef uint32 (*si_intrsoff_t)(void *intr_arg);
+typedef void (*si_intrsrestore_t)(void *intr_arg, uint32 arg);
+typedef bool (*si_intrsenabled_t)(void *intr_arg);
+
+typedef struct gpioh_item {
+ void *arg;
+ bool level;
+ gpio_handler_t handler;
+ uint32 event;
+ struct gpioh_item *next;
+} gpioh_item_t;
+
+/* misc si info needed by some of the routines */
+typedef struct si_common_info {
+ void *regs[SI_MAXCORES]; /* other regs va */
+ void *regs2[SI_MAXCORES]; /* va of each core second register set (usbh20) */
+ uint coreid[SI_MAXCORES]; /* id of each core */
+ uint32 cia[SI_MAXCORES]; /* erom cia entry for each core */
+ uint32 cib[SI_MAXCORES]; /* erom cia entry for each core */
+ uint32 coresba_size[SI_MAXCORES]; /* backplane address space size */
+ uint32 coresba2_size[SI_MAXCORES]; /* second address space size */
+ uint32 coresba[SI_MAXCORES]; /* backplane address of each core */
+ uint32 coresba2[SI_MAXCORES]; /* address of each core second register set (usbh20) */
+ void *wrappers[SI_MAXCORES]; /* other cores wrapper va */
+ uint32 wrapba[SI_MAXCORES]; /* address of controlling wrapper */
+ uint32 oob_router; /* oob router registers for axi */
+ uint8 attach_count;
+} si_common_info_t;
+
+typedef struct si_info {
+ struct si_pub pub; /* back plane public state (must be first field) */
+
+ void *osh; /* osl os handle */
+ void *sdh; /* bcmsdh handle */
+ void *pch; /* PCI/E core handle */
+ uint dev_coreid; /* the core provides driver functions */
+ void *intr_arg; /* interrupt callback function arg */
+ si_intrsoff_t intrsoff_fn; /* turns chip interrupts off */
+ si_intrsrestore_t intrsrestore_fn; /* restore chip interrupts */
+ si_intrsenabled_t intrsenabled_fn; /* check if interrupts are enabled */
+
+
+ gpioh_item_t *gpioh_head; /* GPIO event handlers list */
+
+ bool memseg; /* flag to toggle MEM_SEG register */
+
+ char *vars;
+ uint varsz;
+
+ void *curmap; /* current regs va */
+
+ uint curidx; /* current core index */
+ uint numcores; /* # discovered cores */
+ void *curwrap; /* current wrapper va */
+ si_common_info_t *common_info; /* Common information for all the cores in a chip */
+} si_info_t;
+
+#define SI_INFO(sih) (si_info_t *)(uintptr)sih
+
+#define GOODCOREADDR(x, b) (((x) >= (b)) && ((x) < ((b) + SI_MAXCORES * SI_CORE_SIZE)) && \
+ ISALIGNED((x), SI_CORE_SIZE))
+#define GOODREGS(regs) ((regs) != NULL && ISALIGNED((uintptr)(regs), SI_CORE_SIZE))
+#define BADCOREADDR 0
+#define GOODIDX(idx) (((uint)idx) < SI_MAXCORES)
+#define BADIDX (SI_MAXCORES + 1)
+#define NOREV -1 /* Invalid rev */
+
+#define PCI(si) ((BUSTYPE((si)->pub.bustype) == PCI_BUS) && \
+ ((si)->pub.buscoretype == PCI_CORE_ID))
+#define PCIE(si) ((BUSTYPE((si)->pub.bustype) == PCI_BUS) && \
+ ((si)->pub.buscoretype == PCIE_CORE_ID))
+#define PCMCIA(si) ((BUSTYPE((si)->pub.bustype) == PCMCIA_BUS) && ((si)->memseg == TRUE))
+
+/* Newer chips can access PCI/PCIE and CC core without requiring to change
+ * PCI BAR0 WIN
+ */
+#define SI_FAST(si) (((si)->pub.buscoretype == PCIE_CORE_ID) || \
+ (((si)->pub.buscoretype == PCI_CORE_ID) && (si)->pub.buscorerev >= 13))
+
+#define PCIEREGS(si) (((char *)((si)->curmap) + PCI_16KB0_PCIREGS_OFFSET))
+#define CCREGS_FAST(si) (((char *)((si)->curmap) + PCI_16KB0_CCREGS_OFFSET))
+
+/*
+ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
+ * after core switching to avoid invalid register accesss inside ISR.
+ */
+#define INTR_OFF(si, intr_val) \
+ if ((si)->intrsoff_fn && (si)->common_info->coreid[(si)->curidx] == (si)->dev_coreid) { \
+ intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
+#define INTR_RESTORE(si, intr_val) \
+ if ((si)->intrsrestore_fn && (si)->common_info->coreid[(si)->curidx] == (si)->dev_coreid) {\
+ (*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
+
+/* dynamic clock control defines */
+#define LPOMINFREQ 25000 /* low power oscillator min */
+#define LPOMAXFREQ 43000 /* low power oscillator max */
+#define XTALMINFREQ 19800000 /* 20 MHz - 1% */
+#define XTALMAXFREQ 20200000 /* 20 MHz + 1% */
+#define PCIMINFREQ 25000000 /* 25 MHz */
+#define PCIMAXFREQ 34000000 /* 33 MHz + fudge */
+
+#define ILP_DIV_5MHZ 0 /* ILP = 5 MHz */
+#define ILP_DIV_1MHZ 4 /* ILP = 1 MHz */
+
+#define PCI_FORCEHT(si) \
+ (((PCIE(si)) && (si->pub.chip == BCM4311_CHIP_ID) && ((si->pub.chiprev <= 1))) || \
+ ((PCI(si) || PCIE(si)) && (si->pub.chip == BCM4321_CHIP_ID)))
+
+/* GPIO Based LED powersave defines */
+#define DEFAULT_GPIO_ONTIME 10 /* Default: 10% on */
+#define DEFAULT_GPIO_OFFTIME 90 /* Default: 10% on */
+
+#ifndef DEFAULT_GPIOTIMERVAL
+#define DEFAULT_GPIOTIMERVAL ((DEFAULT_GPIO_ONTIME << GPIO_ONTIME_SHIFT) | DEFAULT_GPIO_OFFTIME)
+#endif
+
+/* Silicon Backplane externs */
+extern void sb_scan(si_t *sih, void *regs, uint devid);
+extern uint sb_coreid(si_t *sih);
+extern uint sb_flag(si_t *sih);
+extern void sb_setint(si_t *sih, int siflag);
+extern uint sb_corevendor(si_t *sih);
+extern uint sb_corerev(si_t *sih);
+extern uint sb_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val);
+extern bool sb_iscoreup(si_t *sih);
+extern void *sb_setcoreidx(si_t *sih, uint coreidx);
+extern uint32 sb_core_cflags(si_t *sih, uint32 mask, uint32 val);
+extern void sb_core_cflags_wo(si_t *sih, uint32 mask, uint32 val);
+extern uint32 sb_core_sflags(si_t *sih, uint32 mask, uint32 val);
+extern void sb_commit(si_t *sih);
+extern uint32 sb_base(uint32 admatch);
+extern uint32 sb_size(uint32 admatch);
+extern void sb_core_reset(si_t *sih, uint32 bits, uint32 resetbits);
+extern void sb_core_tofixup(si_t *sih);
+extern void sb_core_disable(si_t *sih, uint32 bits);
+extern uint32 sb_addrspace(si_t *sih, uint asidx);
+extern uint32 sb_addrspacesize(si_t *sih, uint asidx);
+extern int sb_numaddrspaces(si_t *sih);
+
+extern uint32 sb_set_initiator_to(si_t *sih, uint32 to, uint idx);
+
+
+
+/* Wake-on-wireless-LAN (WOWL) */
+extern bool sb_pci_pmecap(si_t *sih);
+struct osl_info;
+extern bool sb_pci_fastpmecap(struct osl_info *osh);
+extern bool sb_pci_pmeclr(si_t *sih);
+extern void sb_pci_pmeen(si_t *sih);
+extern uint sb_pcie_readreg(void *sih, uint addrtype, uint offset);
+
+/* AMBA Interconnect exported externs */
+extern si_t *ai_attach(uint pcidev, osl_t *osh, void *regs, uint bustype,
+ void *sdh, char **vars, uint *varsz);
+extern si_t *ai_kattach(osl_t *osh);
+extern void ai_scan(si_t *sih, void *regs, uint devid);
+
+extern uint ai_flag(si_t *sih);
+extern void ai_setint(si_t *sih, int siflag);
+extern uint ai_coreidx(si_t *sih);
+extern uint ai_corevendor(si_t *sih);
+extern uint ai_corerev(si_t *sih);
+extern bool ai_iscoreup(si_t *sih);
+extern void *ai_setcoreidx(si_t *sih, uint coreidx);
+extern uint32 ai_core_cflags(si_t *sih, uint32 mask, uint32 val);
+extern void ai_core_cflags_wo(si_t *sih, uint32 mask, uint32 val);
+extern uint32 ai_core_sflags(si_t *sih, uint32 mask, uint32 val);
+extern uint ai_corereg(si_t *sih, uint coreidx, uint regoff, uint mask, uint val);
+extern void ai_core_reset(si_t *sih, uint32 bits, uint32 resetbits);
+extern void ai_core_disable(si_t *sih, uint32 bits);
+extern int ai_numaddrspaces(si_t *sih);
+extern uint32 ai_addrspace(si_t *sih, uint asidx);
+extern uint32 ai_addrspacesize(si_t *sih, uint asidx);
+extern void ai_write_wrap_reg(si_t *sih, uint32 offset, uint32 val);
+
+
+#endif /* _siutils_priv_h_ */
diff --git a/drivers/net/wireless/bcm4329/wl_iw.c b/drivers/net/wireless/bcm4329/wl_iw.c
new file mode 100644
index 0000000..8460804
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/wl_iw.c
@@ -0,0 +1,8319 @@
+/*
+ * Linux Wireless Extensions support
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: wl_iw.c,v 1.51.4.9.2.6.4.142.4.69 2010/12/21 03:00:08 Exp $
+ */
+
+
+#include <typedefs.h>
+#include <linuxver.h>
+#include <osl.h>
+
+#include <bcmutils.h>
+#include <bcmendian.h>
+#include <proto/ethernet.h>
+
+#include <linux/if_arp.h>
+#include <asm/uaccess.h>
+
+#include <dngl_stats.h>
+#include <dhd.h>
+#include <dhdioctl.h>
+
+typedef void wlc_info_t;
+typedef void wl_info_t;
+typedef const struct si_pub si_t;
+#include <wlioctl.h>
+
+#include <proto/ethernet.h>
+#include <dngl_stats.h>
+#include <dhd.h>
+#define WL_ERROR(x) printf x
+#define WL_TRACE(x)
+#define WL_ASSOC(x)
+#define WL_INFORM(x)
+#define WL_WSEC(x)
+#define WL_SCAN(x)
+#define WL_TRACE_COEX(x)
+
+#include <wl_iw.h>
+
+
+
+#ifndef IW_ENCODE_ALG_SM4
+#define IW_ENCODE_ALG_SM4 0x20
+#endif
+
+#ifndef IW_AUTH_WAPI_ENABLED
+#define IW_AUTH_WAPI_ENABLED 0x20
+#endif
+
+#ifndef IW_AUTH_WAPI_VERSION_1
+#define IW_AUTH_WAPI_VERSION_1 0x00000008
+#endif
+
+#ifndef IW_AUTH_CIPHER_SMS4
+#define IW_AUTH_CIPHER_SMS4 0x00000020
+#endif
+
+#ifndef IW_AUTH_KEY_MGMT_WAPI_PSK
+#define IW_AUTH_KEY_MGMT_WAPI_PSK 4
+#endif
+
+#ifndef IW_AUTH_KEY_MGMT_WAPI_CERT
+#define IW_AUTH_KEY_MGMT_WAPI_CERT 8
+#endif
+
+
+#define IW_WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED | SMS4_ENABLED))
+
+#include <linux/rtnetlink.h>
+#include <linux/mutex.h>
+
+#define WL_IW_USE_ISCAN 1
+#define ENABLE_ACTIVE_PASSIVE_SCAN_SUPPRESS 1
+
+#if defined(SOFTAP)
+#define WL_SOFTAP(x) printk x
+static struct net_device *priv_dev;
+static bool ap_cfg_running = FALSE;
+bool ap_fw_loaded = FALSE;
+static long ap_cfg_pid = -1;
+struct net_device *ap_net_dev = NULL;
+struct semaphore ap_eth_sema;
+static struct completion ap_cfg_exited;
+static int wl_iw_set_ap_security(struct net_device *dev, struct ap_profile *ap);
+static int wl_iw_softap_deassoc_stations(struct net_device *dev, u8 *mac);
+#endif
+
+#define WL_IW_IOCTL_CALL(func_call) \
+ do { \
+ func_call; \
+ } while (0)
+
+static int g_onoff = G_WLAN_SET_ON;
+wl_iw_extra_params_t g_wl_iw_params;
+static struct mutex wl_cache_lock;
+
+#ifdef CONFIG_US_NON_DFS_CHANNELS_ONLY
+static bool use_non_dfs_channels = true;
+#endif
+
+extern bool wl_iw_conn_status_str(uint32 event_type, uint32 status,
+ uint32 reason, char* stringBuf, uint buflen);
+#include <bcmsdbus.h>
+extern void dhd_customer_gpio_wlan_ctrl(int onoff);
+extern uint dhd_dev_reset(struct net_device *dev, uint8 flag);
+extern void dhd_dev_init_ioctl(struct net_device *dev);
+int dev_iw_write_cfg1_bss_var(struct net_device *dev, int val);
+
+uint wl_msg_level = WL_ERROR_VAL;
+
+#define MAX_WLIW_IOCTL_LEN 1024
+
+
+#if defined(IL_BIGENDIAN)
+#include <bcmendian.h>
+#define htod32(i) (bcmswap32(i))
+#define htod16(i) (bcmswap16(i))
+#define dtoh32(i) (bcmswap32(i))
+#define dtoh16(i) (bcmswap16(i))
+#define htodchanspec(i) htod16(i)
+#define dtohchanspec(i) dtoh16(i)
+#else
+#define htod32(i) i
+#define htod16(i) i
+#define dtoh32(i) i
+#define dtoh16(i) i
+#define htodchanspec(i) i
+#define dtohchanspec(i) i
+#endif
+
+#ifdef CONFIG_WIRELESS_EXT
+
+extern struct iw_statistics *dhd_get_wireless_stats(struct net_device *dev);
+extern int dhd_wait_pend8021x(struct net_device *dev);
+#endif
+
+#if WIRELESS_EXT < 19
+#define IW_IOCTL_IDX(cmd) ((cmd) - SIOCIWFIRST)
+#define IW_EVENT_IDX(cmd) ((cmd) - IWEVFIRST)
+#endif
+
+static void *g_scan = NULL;
+static volatile uint g_scan_specified_ssid;
+static wlc_ssid_t g_specific_ssid;
+
+static wlc_ssid_t g_ssid;
+
+static wl_iw_ss_cache_ctrl_t g_ss_cache_ctrl;
+#if defined(CONFIG_FIRST_SCAN)
+static volatile uint g_first_broadcast_scan;
+static volatile uint g_first_counter_scans;
+#define MAX_ALLOWED_BLOCK_SCAN_FROM_FIRST_SCAN 3
+#endif
+
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0))
+#define DAEMONIZE(a) daemonize(a); \
+ allow_signal(SIGKILL); \
+ allow_signal(SIGTERM);
+#else
+#define RAISE_RX_SOFTIRQ() \
+ cpu_raise_softirq(smp_processor_id(), NET_RX_SOFTIRQ)
+#define DAEMONIZE(a) daemonize(); \
+ do { if (a) \
+ strncpy(current->comm, a, MIN(sizeof(current->comm), (strlen(a) + 1))); \
+ } while (0);
+#endif
+
+#if defined(WL_IW_USE_ISCAN)
+#if !defined(CSCAN)
+static void wl_iw_free_ss_cache(void);
+static int wl_iw_run_ss_cache_timer(int kick_off);
+#endif
+#if defined(CONFIG_FIRST_SCAN)
+int wl_iw_iscan_set_scan_broadcast_prep(struct net_device *dev, uint flag);
+#endif
+static int dev_wlc_bufvar_set(struct net_device *dev, char *name, char *buf, int len);
+#define ISCAN_STATE_IDLE 0
+#define ISCAN_STATE_SCANING 1
+
+#define WLC_IW_ISCAN_MAXLEN 2048
+typedef struct iscan_buf {
+ struct iscan_buf * next;
+ char iscan_buf[WLC_IW_ISCAN_MAXLEN];
+} iscan_buf_t;
+
+typedef struct iscan_info {
+ struct net_device *dev;
+ struct timer_list timer;
+ uint32 timer_ms;
+ uint32 timer_on;
+ int iscan_state;
+ iscan_buf_t * list_hdr;
+ iscan_buf_t * list_cur;
+
+
+ long sysioc_pid;
+ struct semaphore sysioc_sem;
+ struct completion sysioc_exited;
+
+ uint32 scan_flag;
+#if defined CSCAN
+ char ioctlbuf[WLC_IOCTL_MEDLEN];
+#else
+ char ioctlbuf[WLC_IOCTL_SMLEN];
+#endif
+ wl_iscan_params_t *iscan_ex_params_p;
+ int iscan_ex_param_size;
+} iscan_info_t;
+#define COEX_DHCP 1
+
+#define BT_DHCP_eSCO_FIX
+#define BT_DHCP_USE_FLAGS
+#define BT_DHCP_OPPORTUNITY_WINDOW_TIME 2500
+#define BT_DHCP_FLAG_FORCE_TIME 5500
+static void wl_iw_bt_flag_set(struct net_device *dev, bool set);
+static void wl_iw_bt_release(void);
+
+typedef enum bt_coex_status {
+ BT_DHCP_IDLE = 0,
+ BT_DHCP_START,
+ BT_DHCP_OPPORTUNITY_WINDOW,
+ BT_DHCP_FLAG_FORCE_TIMEOUT
+} coex_status_t;
+
+typedef struct bt_info {
+ struct net_device *dev;
+ struct timer_list timer;
+ uint32 timer_ms;
+ uint32 timer_on;
+ bool dhcp_done;
+ int bt_state;
+
+ long bt_pid;
+ struct semaphore bt_sem;
+ struct completion bt_exited;
+} bt_info_t;
+
+bt_info_t *g_bt = NULL;
+static void wl_iw_bt_timerfunc(ulong data);
+iscan_info_t *g_iscan = NULL;
+static void wl_iw_timerfunc(ulong data);
+static void wl_iw_set_event_mask(struct net_device *dev);
+static int
+wl_iw_iscan(iscan_info_t *iscan, wlc_ssid_t *ssid, uint16 action);
+#endif
+static int
+wl_iw_set_scan(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+);
+
+#ifndef CSCAN
+static int
+wl_iw_get_scan(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+);
+
+static uint
+wl_iw_get_scan_prep(
+ wl_scan_results_t *list,
+ struct iw_request_info *info,
+ char *extra,
+ short max_size
+);
+#endif
+
+static void swap_key_from_BE(
+ wl_wsec_key_t *key
+)
+{
+ key->index = htod32(key->index);
+ key->len = htod32(key->len);
+ key->algo = htod32(key->algo);
+ key->flags = htod32(key->flags);
+ key->rxiv.hi = htod32(key->rxiv.hi);
+ key->rxiv.lo = htod16(key->rxiv.lo);
+ key->iv_initialized = htod32(key->iv_initialized);
+}
+
+static void swap_key_to_BE(
+ wl_wsec_key_t *key
+)
+{
+ key->index = dtoh32(key->index);
+ key->len = dtoh32(key->len);
+ key->algo = dtoh32(key->algo);
+ key->flags = dtoh32(key->flags);
+ key->rxiv.hi = dtoh32(key->rxiv.hi);
+ key->rxiv.lo = dtoh16(key->rxiv.lo);
+ key->iv_initialized = dtoh32(key->iv_initialized);
+}
+
+static int
+dev_wlc_ioctl(
+ struct net_device *dev,
+ int cmd,
+ void *arg,
+ int len
+)
+{
+ struct ifreq ifr;
+ wl_ioctl_t ioc;
+ mm_segment_t fs;
+ int ret = -EINVAL;
+
+ if (!dev) {
+ WL_ERROR(("%s: dev is null\n", __FUNCTION__));
+ return ret;
+ }
+
+ net_os_wake_lock(dev);
+
+ WL_INFORM(("\n%s, PID:%x: send Local IOCTL -> dhd: cmd:0x%x, buf:%p, len:%d ,\n",
+ __FUNCTION__, current->pid, cmd, arg, len));
+
+ if (g_onoff == G_WLAN_SET_ON) {
+ memset(&ioc, 0, sizeof(ioc));
+ ioc.cmd = cmd;
+ ioc.buf = arg;
+ ioc.len = len;
+
+ strcpy(ifr.ifr_name, dev->name);
+ ifr.ifr_data = (caddr_t) &ioc;
+
+ ret = dev_open(dev);
+ if (ret) {
+ WL_ERROR(("%s: Error dev_open: %d\n", __func__, ret));
+ net_os_wake_unlock(dev);
+ return ret;
+ }
+
+ fs = get_fs();
+ set_fs(get_ds());
+#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 31))
+ ret = dev->do_ioctl(dev, &ifr, SIOCDEVPRIVATE);
+#else
+ ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, SIOCDEVPRIVATE);
+#endif
+ set_fs(fs);
+ }
+ else {
+ WL_TRACE(("%s: call after driver stop : ignored\n", __FUNCTION__));
+ }
+
+ net_os_wake_unlock(dev);
+
+ return ret;
+}
+
+
+static int
+dev_wlc_intvar_get_reg(
+ struct net_device *dev,
+ char *name,
+ uint reg,
+ int *retval)
+{
+ union {
+ char buf[WLC_IOCTL_SMLEN];
+ int val;
+ } var;
+ int error;
+
+ uint len;
+ len = bcm_mkiovar(name, (char *)(®), sizeof(reg), (char *)(&var), sizeof(var.buf));
+ ASSERT(len);
+ error = dev_wlc_ioctl(dev, WLC_GET_VAR, (void *)&var, len);
+
+ *retval = dtoh32(var.val);
+ return (error);
+}
+
+
+static int
+dev_wlc_intvar_set_reg(
+ struct net_device *dev,
+ char *name,
+ char *addr,
+ char * val)
+{
+ char reg_addr[8];
+
+ memset(reg_addr, 0, sizeof(reg_addr));
+ memcpy((char *)®_addr[0], (char *)addr, 4);
+ memcpy((char *)®_addr[4], (char *)val, 4);
+
+ return (dev_wlc_bufvar_set(dev, name, (char *)®_addr[0], sizeof(reg_addr)));
+}
+
+
+static int
+dev_wlc_intvar_set(
+ struct net_device *dev,
+ char *name,
+ int val)
+{
+ char buf[WLC_IOCTL_SMLEN];
+ uint len;
+
+ val = htod32(val);
+ len = bcm_mkiovar(name, (char *)(&val), sizeof(val), buf, sizeof(buf));
+ ASSERT(len);
+
+ return (dev_wlc_ioctl(dev, WLC_SET_VAR, buf, len));
+}
+
+#if defined(WL_IW_USE_ISCAN)
+static int
+dev_iw_iovar_setbuf(
+ struct net_device *dev,
+ char *iovar,
+ void *param,
+ int paramlen,
+ void *bufptr,
+ int buflen)
+{
+ int iolen;
+
+ iolen = bcm_mkiovar(iovar, param, paramlen, bufptr, buflen);
+ ASSERT(iolen);
+
+ if (iolen == 0)
+ return 0;
+
+ return (dev_wlc_ioctl(dev, WLC_SET_VAR, bufptr, iolen));
+}
+
+static int
+dev_iw_iovar_getbuf(
+ struct net_device *dev,
+ char *iovar,
+ void *param,
+ int paramlen,
+ void *bufptr,
+ int buflen)
+{
+ int iolen;
+
+ iolen = bcm_mkiovar(iovar, param, paramlen, bufptr, buflen);
+ ASSERT(iolen);
+
+ return (dev_wlc_ioctl(dev, WLC_GET_VAR, bufptr, buflen));
+}
+#endif
+
+
+#if WIRELESS_EXT > 17
+static int
+dev_wlc_bufvar_set(
+ struct net_device *dev,
+ char *name,
+ char *buf, int len)
+{
+ static char ioctlbuf[MAX_WLIW_IOCTL_LEN];
+ uint buflen;
+
+ buflen = bcm_mkiovar(name, buf, len, ioctlbuf, sizeof(ioctlbuf));
+ ASSERT(buflen);
+
+ return (dev_wlc_ioctl(dev, WLC_SET_VAR, ioctlbuf, buflen));
+}
+#endif
+
+
+static int
+dev_wlc_bufvar_get(
+ struct net_device *dev,
+ char *name,
+ char *buf, int buflen)
+{
+ static char ioctlbuf[MAX_WLIW_IOCTL_LEN];
+ int error;
+ uint len;
+
+ len = bcm_mkiovar(name, NULL, 0, ioctlbuf, sizeof(ioctlbuf));
+ ASSERT(len);
+ error = dev_wlc_ioctl(dev, WLC_GET_VAR, (void *)ioctlbuf, MAX_WLIW_IOCTL_LEN);
+ if (!error)
+ bcopy(ioctlbuf, buf, buflen);
+
+ return (error);
+}
+
+
+
+static int
+dev_wlc_intvar_get(
+ struct net_device *dev,
+ char *name,
+ int *retval)
+{
+ union {
+ char buf[WLC_IOCTL_SMLEN];
+ int val;
+ } var;
+ int error;
+
+ uint len;
+ uint data_null;
+
+ len = bcm_mkiovar(name, (char *)(&data_null), 0, (char *)(&var), sizeof(var.buf));
+ ASSERT(len);
+ error = dev_wlc_ioctl(dev, WLC_GET_VAR, (void *)&var, len);
+
+ *retval = dtoh32(var.val);
+
+ return (error);
+}
+
+
+#if WIRELESS_EXT > 12
+static int
+wl_iw_set_active_scan(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int as = 0;
+ int error = 0;
+ char *p = extra;
+
+#if defined(WL_IW_USE_ISCAN)
+ if (g_iscan->iscan_state == ISCAN_STATE_IDLE)
+#endif
+ error = dev_wlc_ioctl(dev, WLC_SET_PASSIVE_SCAN, &as, sizeof(as));
+#if defined(WL_IW_USE_ISCAN)
+ else
+ g_iscan->scan_flag = as;
+#endif
+ p += snprintf(p, MAX_WX_STRING, "OK");
+
+ wrqu->data.length = p - extra + 1;
+ return error;
+}
+
+static int
+wl_iw_set_passive_scan(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int ps = 1;
+ int error = 0;
+ char *p = extra;
+
+#if defined(WL_IW_USE_ISCAN)
+ if (g_iscan->iscan_state == ISCAN_STATE_IDLE) {
+#endif
+
+
+ if (g_scan_specified_ssid == 0) {
+ error = dev_wlc_ioctl(dev, WLC_SET_PASSIVE_SCAN, &ps, sizeof(ps));
+ }
+#if defined(WL_IW_USE_ISCAN)
+ }
+ else
+ g_iscan->scan_flag = ps;
+#endif
+
+ p += snprintf(p, MAX_WX_STRING, "OK");
+
+ wrqu->data.length = p - extra + 1;
+ return error;
+}
+
+static int
+wl_iw_get_macaddr(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error;
+ char buf[128];
+ struct ether_addr *id;
+ char *p = extra;
+
+
+ strcpy(buf, "cur_etheraddr");
+ error = dev_wlc_ioctl(dev, WLC_GET_VAR, buf, sizeof(buf));
+ id = (struct ether_addr *) buf;
+ p += snprintf(p, MAX_WX_STRING, "Macaddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
+ id->octet[0], id->octet[1], id->octet[2],
+ id->octet[3], id->octet[4], id->octet[5]);
+ wrqu->data.length = p - extra + 1;
+
+ return error;
+}
+
+static int
+wl_iw_set_country_code(struct net_device *dev, char *ccode)
+{
+ char country_code[WLC_CNTRY_BUF_SZ];
+ int ret = -1;
+
+ WL_TRACE(("%s\n", __FUNCTION__));
+ if (!ccode)
+ ccode = dhd_bus_country_get(dev);
+ strncpy(country_code, ccode, sizeof(country_code));
+ if (ccode && (country_code[0] != 0)) {
+#ifdef CONFIG_US_NON_DFS_CHANNELS_ONLY
+ if (use_non_dfs_channels && !strncmp(country_code, "US", 2))
+ strncpy(country_code, "Q2", WLC_CNTRY_BUF_SZ);
+ if (!use_non_dfs_channels && !strncmp(country_code, "Q2", 2))
+ strncpy(country_code, "US", WLC_CNTRY_BUF_SZ);
+#endif
+ ret = dev_wlc_ioctl(dev, WLC_SET_COUNTRY, &country_code, sizeof(country_code));
+ if (ret >= 0) {
+ WL_TRACE(("%s: set country %s OK\n", __FUNCTION__, country_code));
+ dhd_bus_country_set(dev, &country_code[0]);
+ }
+ }
+ return ret;
+}
+
+static int
+wl_iw_set_country(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ char country_code[WLC_CNTRY_BUF_SZ];
+ int error = 0;
+ char *p = extra;
+ int country_offset;
+ int country_code_size;
+
+ WL_TRACE(("%s\n", __FUNCTION__));
+ memset(country_code, 0, sizeof(country_code));
+
+ country_offset = strcspn(extra, " ");
+ country_code_size = strlen(extra) - country_offset;
+
+ if (country_offset != 0) {
+ strncpy(country_code, extra + country_offset + 1,
+ MIN(country_code_size, sizeof(country_code)));
+ error = wl_iw_set_country_code(dev, country_code);
+ if (error >= 0) {
+ p += snprintf(p, MAX_WX_STRING, "OK");
+ WL_TRACE(("%s: set country %s OK\n", __FUNCTION__, country_code));
+ goto exit;
+ }
+ }
+
+ WL_ERROR(("%s: set country %s failed code %d\n", __FUNCTION__, country_code, error));
+ p += snprintf(p, MAX_WX_STRING, "FAIL");
+
+exit:
+ wrqu->data.length = p - extra + 1;
+ return error;
+}
+
+#ifdef CUSTOMER_HW2
+static int
+wl_iw_set_power_mode(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error = 0;
+ char *p = extra;
+ static int pm = PM_FAST;
+ int pm_local = PM_OFF;
+ char powermode_val = 0;
+
+ WL_TRACE_COEX(("%s: DHCP session cmd:%s\n", __FUNCTION__, extra));
+
+ strncpy((char *)&powermode_val, extra + strlen("POWERMODE") + 1, 1);
+
+ if (strnicmp((char *)&powermode_val, "1", strlen("1")) == 0) {
+
+ dev_wlc_ioctl(dev, WLC_GET_PM, &pm, sizeof(pm));
+ dev_wlc_ioctl(dev, WLC_SET_PM, &pm_local, sizeof(pm_local));
+
+ /* Disable packet filtering if necessary */
+ net_os_set_packet_filter(dev, 0);
+
+ g_bt->dhcp_done = false;
+ WL_TRACE_COEX(("%s: DHCP start, pm:%d changed to pm:%d\n",
+ __FUNCTION__, pm, pm_local));
+
+ } else if (strnicmp((char *)&powermode_val, "0", strlen("0")) == 0) {
+
+ dev_wlc_ioctl(dev, WLC_SET_PM, &pm, sizeof(pm));
+
+ /* Enable packet filtering if was turned off */
+ net_os_set_packet_filter(dev, 1);
+
+ g_bt->dhcp_done = true;
+
+ } else {
+ WL_ERROR(("%s Unkwown yet power setting, ignored\n",
+ __FUNCTION__));
+ }
+
+ p += snprintf(p, MAX_WX_STRING, "OK");
+
+ wrqu->data.length = p - extra + 1;
+
+ return error;
+}
+#endif
+
+
+static bool btcoex_is_sco_active(struct net_device *dev)
+{
+ int ioc_res = 0;
+ bool res = false;
+ int temp = 0;
+
+ ioc_res = dev_wlc_intvar_get_reg(dev, "btc_params", 4, &temp);
+
+ if (ioc_res == 0) {
+ WL_TRACE_COEX(("%s: read btc_params[4] = %x\n", __FUNCTION__, temp));
+
+ if ((temp > 0xea0) && (temp < 0xed8)) {
+ WL_TRACE_COEX(("%s: BT SCO/eSCO is ACTIVE\n", __FUNCTION__));
+ res = true;
+ } else {
+ WL_TRACE_COEX(("%s: BT SCO/eSCO is NOT detected\n", __FUNCTION__));
+ }
+ } else {
+ WL_ERROR(("%s ioc read btc params error\n", __FUNCTION__));
+ }
+ return res;
+}
+
+#if defined(BT_DHCP_eSCO_FIX)
+
+static int set_btc_esco_params(struct net_device *dev, bool trump_sco)
+{
+ static bool saved_status = false;
+
+ char buf_reg50va_dhcp_on[8] = { 50, 00, 00, 00, 0x22, 0x80, 0x00, 0x00 };
+ char buf_reg51va_dhcp_on[8] = { 51, 00, 00, 00, 0x00, 0x00, 0x00, 0x00 };
+ char buf_reg64va_dhcp_on[8] = { 64, 00, 00, 00, 0x00, 0x00, 0x00, 0x00 };
+ char buf_reg65va_dhcp_on[8] = { 65, 00, 00, 00, 0x00, 0x00, 0x00, 0x00 };
+ char buf_reg71va_dhcp_on[8] = { 71, 00, 00, 00, 0x00, 0x00, 0x00, 0x00 };
+
+ uint32 regaddr;
+ static uint32 saved_reg50;
+ static uint32 saved_reg51;
+ static uint32 saved_reg64;
+ static uint32 saved_reg65;
+ static uint32 saved_reg71;
+
+ if (trump_sco) {
+
+ WL_TRACE_COEX(("Do new SCO/eSCO coex algo {save & override} \n"));
+
+ if ((!dev_wlc_intvar_get_reg(dev, "btc_params", 50, &saved_reg50)) &&
+ (!dev_wlc_intvar_get_reg(dev, "btc_params", 51, &saved_reg51)) &&
+ (!dev_wlc_intvar_get_reg(dev, "btc_params", 64, &saved_reg64)) &&
+ (!dev_wlc_intvar_get_reg(dev, "btc_params", 65, &saved_reg65)) &&
+ (!dev_wlc_intvar_get_reg(dev, "btc_params", 71, &saved_reg71))) {
+
+ saved_status = TRUE;
+ WL_TRACE_COEX(("%s saved bt_params[50,51,64,65,71]:"
+ " 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+ __FUNCTION__, saved_reg50, saved_reg51,
+ saved_reg64, saved_reg65, saved_reg71));
+
+ } else {
+ WL_ERROR((":%s: save btc_params failed\n",
+ __FUNCTION__));
+ saved_status = false;
+ return -1;
+ }
+
+ WL_TRACE_COEX(("override with [50,51,64,65,71]:"
+ " 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+ *(u32 *)(buf_reg50va_dhcp_on+4),
+ *(u32 *)(buf_reg51va_dhcp_on+4),
+ *(u32 *)(buf_reg64va_dhcp_on+4),
+ *(u32 *)(buf_reg65va_dhcp_on+4),
+ *(u32 *)(buf_reg71va_dhcp_on+4)));
+
+ dev_wlc_bufvar_set(dev, "btc_params", (char *)&buf_reg50va_dhcp_on[0], 8);
+ dev_wlc_bufvar_set(dev, "btc_params", (char *)&buf_reg51va_dhcp_on[0], 8);
+ dev_wlc_bufvar_set(dev, "btc_params", (char *)&buf_reg64va_dhcp_on[0], 8);
+ dev_wlc_bufvar_set(dev, "btc_params", (char *)&buf_reg65va_dhcp_on[0], 8);
+ dev_wlc_bufvar_set(dev, "btc_params", (char *)&buf_reg71va_dhcp_on[0], 8);
+
+ saved_status = true;
+
+ } else if (saved_status) {
+
+ WL_TRACE_COEX(("Do new SCO/eSCO coex algo {save & override} \n"));
+
+ regaddr = 50;
+ dev_wlc_intvar_set_reg(dev, "btc_params",
+ (char *)®addr, (char *)&saved_reg50);
+ regaddr = 51;
+ dev_wlc_intvar_set_reg(dev, "btc_params",
+ (char *)®addr, (char *)&saved_reg51);
+ regaddr = 64;
+ dev_wlc_intvar_set_reg(dev, "btc_params",
+ (char *)®addr, (char *)&saved_reg64);
+ regaddr = 65;
+ dev_wlc_intvar_set_reg(dev, "btc_params",
+ (char *)®addr, (char *)&saved_reg65);
+ regaddr = 71;
+ dev_wlc_intvar_set_reg(dev, "btc_params",
+ (char *)®addr, (char *)&saved_reg71);
+
+ WL_TRACE_COEX(("restore bt_params[50,51,64,65,71]: 0x%x 0x%x 0x%x 0x%x 0x%x\n",
+ saved_reg50, saved_reg51, saved_reg64,
+ saved_reg65, saved_reg71));
+
+ saved_status = false;
+ } else {
+ WL_ERROR((":%s att to restore not saved BTCOEX params\n",
+ __FUNCTION__));
+ return -1;
+ }
+ return 0;
+}
+#endif
+
+static int
+wl_iw_get_power_mode(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error;
+ char *p = extra;
+ int pm_local = PM_FAST;
+
+ error = dev_wlc_ioctl(dev, WLC_GET_PM, &pm_local, sizeof(pm_local));
+ if (!error) {
+ WL_TRACE(("%s: Powermode = %d\n", __func__, pm_local));
+ if (pm_local == PM_OFF)
+ pm_local = 1; /* Active */
+ else
+ pm_local = 0; /* Auto */
+ p += snprintf(p, MAX_WX_STRING, "powermode = %d", pm_local);
+ }
+ else {
+ WL_TRACE(("%s: Error = %d\n", __func__, error));
+ p += snprintf(p, MAX_WX_STRING, "FAIL");
+ }
+ wrqu->data.length = p - extra + 1;
+ return error;
+}
+
+static int
+wl_iw_set_btcoex_dhcp(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error = 0;
+ char *p = extra;
+#ifndef CUSTOMER_HW2
+ static int pm = PM_FAST;
+ int pm_local = PM_OFF;
+#endif
+ char powermode_val = 0;
+ char buf_reg66va_dhcp_on[8] = { 66, 00, 00, 00, 0x10, 0x27, 0x00, 0x00 };
+ char buf_reg41va_dhcp_on[8] = { 41, 00, 00, 00, 0x33, 0x00, 0x00, 0x00 };
+ char buf_reg68va_dhcp_on[8] = { 68, 00, 00, 00, 0x90, 0x01, 0x00, 0x00 };
+
+ uint32 regaddr;
+ static uint32 saved_reg66;
+ static uint32 saved_reg41;
+ static uint32 saved_reg68;
+ static bool saved_status = FALSE;
+
+ char buf_flag7_default[8] = { 7, 00, 00, 00, 0x0, 0x00, 0x00, 0x00};
+
+#ifdef CUSTOMER_HW2
+ strncpy((char *)&powermode_val, extra + strlen("BTCOEXMODE") + 1, 1);
+#else
+ strncpy((char *)&powermode_val, extra + strlen("POWERMODE") + 1, 1);
+#endif
+
+ if (strnicmp((char *)&powermode_val, "1", strlen("1")) == 0) {
+
+ WL_TRACE_COEX(("%s: DHCP session start, cmd:%s\n", __FUNCTION__, extra));
+
+ if ((saved_status == FALSE) &&
+#ifndef CUSTOMER_HW2
+ (!dev_wlc_ioctl(dev, WLC_GET_PM, &pm, sizeof(pm))) &&
+#endif
+ (!dev_wlc_intvar_get_reg(dev, "btc_params", 66, &saved_reg66)) &&
+ (!dev_wlc_intvar_get_reg(dev, "btc_params", 41, &saved_reg41)) &&
+ (!dev_wlc_intvar_get_reg(dev, "btc_params", 68, &saved_reg68))) {
+ WL_TRACE_COEX(("save regs {66,41,68} ->: 0x%x 0x%x 0x%x\n", \
+ saved_reg66, saved_reg41, saved_reg68));
+
+#ifndef CUSTOMER_HW2
+ dev_wlc_ioctl(dev, WLC_SET_PM, &pm_local, sizeof(pm_local));
+#endif
+
+ if (btcoex_is_sco_active(dev)) {
+
+ dev_wlc_bufvar_set(dev, "btc_params", \
+ (char *)&buf_reg66va_dhcp_on[0], \
+ sizeof(buf_reg66va_dhcp_on));
+
+ dev_wlc_bufvar_set(dev, "btc_params", \
+ (char *)&buf_reg41va_dhcp_on[0], \
+ sizeof(buf_reg41va_dhcp_on));
+
+ dev_wlc_bufvar_set(dev, "btc_params", \
+ (char *)&buf_reg68va_dhcp_on[0], \
+ sizeof(buf_reg68va_dhcp_on));
+ saved_status = TRUE;
+
+ g_bt->bt_state = BT_DHCP_START;
+ g_bt->timer_on = 1;
+ mod_timer(&g_bt->timer, g_bt->timer.expires);
+ WL_TRACE_COEX(("%s enable BT DHCP Timer\n", \
+ __FUNCTION__));
+ }
+ }
+ else if (saved_status == TRUE) {
+ WL_ERROR(("%s was called w/o DHCP OFF. Continue\n", __FUNCTION__));
+ }
+ }
+#ifdef CUSTOMER_HW2
+ else if (strnicmp((char *)&powermode_val, "2", strlen("2")) == 0) {
+#else
+ else if (strnicmp((char *)&powermode_val, "0", strlen("0")) == 0) {
+#endif
+
+#ifndef CUSTOMER_HW2
+ dev_wlc_ioctl(dev, WLC_SET_PM, &pm, sizeof(pm));
+#endif
+
+ WL_TRACE_COEX(("%s disable BT DHCP Timer\n", __FUNCTION__));
+ if (g_bt->timer_on) {
+ g_bt->timer_on = 0;
+ del_timer_sync(&g_bt->timer);
+
+ if (g_bt->bt_state != BT_DHCP_IDLE) {
+ WL_TRACE_COEX(("%s bt->bt_state:%d\n",
+ __FUNCTION__, g_bt->bt_state));
+
+ up(&g_bt->bt_sem);
+ }
+ }
+
+ if (saved_status == TRUE) {
+ dev_wlc_bufvar_set(dev, "btc_flags", \
+ (char *)&buf_flag7_default[0], sizeof(buf_flag7_default));
+
+ regaddr = 66;
+ dev_wlc_intvar_set_reg(dev, "btc_params", \
+ (char *)®addr, (char *)&saved_reg66);
+ regaddr = 41;
+ dev_wlc_intvar_set_reg(dev, "btc_params", \
+ (char *)®addr, (char *)&saved_reg41);
+ regaddr = 68;
+ dev_wlc_intvar_set_reg(dev, "btc_params", \
+ (char *)®addr, (char *)&saved_reg68);
+
+ WL_TRACE_COEX(("restore regs {66,41,68} <- 0x%x 0x%x 0x%x\n", \
+ saved_reg66, saved_reg41, saved_reg68));
+ }
+ saved_status = FALSE;
+ }
+ else {
+ WL_ERROR(("%s Unkwown yet power setting, ignored\n",
+ __FUNCTION__));
+ }
+
+ p += snprintf(p, MAX_WX_STRING, "OK");
+
+ wrqu->data.length = p - extra + 1;
+
+ return error;
+}
+
+static int
+wl_iw_set_suspend(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int suspend_flag;
+ int ret_now;
+ int ret = 0;
+
+ suspend_flag = *(extra + strlen(SETSUSPEND_CMD) + 1) - '0';
+
+ if (suspend_flag != 0)
+ suspend_flag = 1;
+
+ ret_now = net_os_set_suspend_disable(dev, suspend_flag);
+
+ if (ret_now != suspend_flag) {
+ if (!(ret = net_os_set_suspend(dev, ret_now)))
+ WL_ERROR(("%s: Suspend Flag %d -> %d\n", \
+ __FUNCTION__, ret_now, suspend_flag));
+ else
+ WL_ERROR(("%s: failed %d\n", __FUNCTION__, ret));
+ }
+
+ return ret;
+}
+
+#ifdef CONFIG_US_NON_DFS_CHANNELS_ONLY
+static int
+wl_iw_set_dfs_channels(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ use_non_dfs_channels = *(extra + strlen(SETDFSCHANNELS_CMD) + 1) - '0';
+ use_non_dfs_channels = (use_non_dfs_channels != 0) ? false : true;
+ wl_iw_set_country_code(dev, NULL);
+ return 0;
+}
+#endif
+
+int
+wl_format_ssid(char* ssid_buf, uint8* ssid, int ssid_len)
+{
+ int i, c;
+ char *p = ssid_buf;
+
+ if (ssid_len > 32) ssid_len = 32;
+
+ for (i = 0; i < ssid_len; i++) {
+ c = (int)ssid[i];
+ if (c == '\\') {
+ *p++ = '\\';
+ *p++ = '\\';
+ } else if (isprint((uchar)c)) {
+ *p++ = (char)c;
+ } else {
+ p += sprintf(p, "\\x%02X", c);
+ }
+ }
+ *p = '\0';
+
+ return p - ssid_buf;
+}
+
+static int
+wl_iw_get_link_speed(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error = 0;
+ char *p = extra;
+ static int link_speed;
+
+ net_os_wake_lock(dev);
+ if (g_onoff == G_WLAN_SET_ON) {
+ error = dev_wlc_ioctl(dev, WLC_GET_RATE, &link_speed, sizeof(link_speed));
+ link_speed *= 500000;
+ }
+
+ p += snprintf(p, MAX_WX_STRING, "LinkSpeed %d", link_speed/1000000);
+
+ wrqu->data.length = p - extra + 1;
+
+ net_os_wake_unlock(dev);
+ return error;
+}
+
+
+static int
+wl_iw_get_dtim_skip(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error = -1;
+ char *p = extra;
+ char iovbuf[32];
+
+ net_os_wake_lock(dev);
+ if (g_onoff == G_WLAN_SET_ON) {
+
+ memset(iovbuf, 0, sizeof(iovbuf));
+ strcpy(iovbuf, "bcn_li_dtim");
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_VAR,
+ &iovbuf, sizeof(iovbuf))) >= 0) {
+
+ p += snprintf(p, MAX_WX_STRING, "Dtim_skip %d", iovbuf[0]);
+ WL_TRACE(("%s: get dtim_skip = %d\n", __FUNCTION__, iovbuf[0]));
+ wrqu->data.length = p - extra + 1;
+ }
+ else
+ WL_ERROR(("%s: get dtim_skip failed code %d\n", \
+ __FUNCTION__, error));
+ }
+ net_os_wake_unlock(dev);
+ return error;
+}
+
+
+static int
+wl_iw_set_dtim_skip(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error = -1;
+ char *p = extra;
+ int bcn_li_dtim;
+ char iovbuf[32];
+
+ net_os_wake_lock(dev);
+ if (g_onoff == G_WLAN_SET_ON) {
+
+ bcn_li_dtim = htod32((uint)*(extra + strlen(DTIM_SKIP_SET_CMD) + 1) - '0');
+
+ if ((bcn_li_dtim >= 0) || ((bcn_li_dtim <= 5))) {
+
+ memset(iovbuf, 0, sizeof(iovbuf));
+ bcm_mkiovar("bcn_li_dtim", (char *)&bcn_li_dtim,
+ 4, iovbuf, sizeof(iovbuf));
+
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_VAR,
+ &iovbuf, sizeof(iovbuf))) >= 0) {
+ p += snprintf(p, MAX_WX_STRING, "OK");
+
+ net_os_set_dtim_skip(dev, bcn_li_dtim);
+
+ WL_TRACE(("%s: set dtim_skip %d OK\n", __FUNCTION__, \
+ bcn_li_dtim));
+ goto exit;
+ }
+ else WL_ERROR(("%s: set dtim_skip %d failed code %d\n", \
+ __FUNCTION__, bcn_li_dtim, error));
+ }
+ else WL_ERROR(("%s Incorrect dtim_skip setting %d, ignored\n", \
+ __FUNCTION__, bcn_li_dtim));
+ }
+
+ p += snprintf(p, MAX_WX_STRING, "FAIL");
+
+exit:
+ wrqu->data.length = p - extra + 1;
+ net_os_wake_unlock(dev);
+ return error;
+}
+
+
+static int
+wl_iw_get_band(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error = -1;
+ char *p = extra;
+ static int band;
+
+ net_os_wake_lock(dev);
+
+ if (g_onoff == G_WLAN_SET_ON) {
+ error = dev_wlc_ioctl(dev, WLC_GET_BAND, &band, sizeof(band));
+
+ p += snprintf(p, MAX_WX_STRING, "Band %d", band);
+
+ wrqu->data.length = p - extra + 1;
+ }
+
+ net_os_wake_unlock(dev);
+ return error;
+}
+
+
+static int
+wl_iw_set_band(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error = -1;
+ char *p = extra;
+ uint band;
+
+ net_os_wake_lock(dev);
+
+ if (g_onoff == G_WLAN_SET_ON) {
+
+ band = htod32((uint)*(extra + strlen(BAND_SET_CMD) + 1) - '0');
+
+ if ((band == WLC_BAND_AUTO) || (band == WLC_BAND_5G) || (band == WLC_BAND_2G)) {
+
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_BAND,
+ &band, sizeof(band))) >= 0) {
+ p += snprintf(p, MAX_WX_STRING, "OK");
+ WL_TRACE(("%s: set band %d OK\n", __FUNCTION__, band));
+ goto exit;
+ }
+ else WL_ERROR(("%s: set band %d failed code %d\n", __FUNCTION__, \
+ band, error));
+ }
+ else WL_ERROR(("%s Incorrect band setting %d, ignored\n", __FUNCTION__, band));
+ }
+
+ p += snprintf(p, MAX_WX_STRING, "FAIL");
+
+exit:
+ wrqu->data.length = p - extra + 1;
+ net_os_wake_unlock(dev);
+ return error;
+}
+
+#ifdef PNO_SUPPORT
+
+static int
+wl_iw_set_pno_reset(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error = -1;
+ char *p = extra;
+
+ net_os_wake_lock(dev);
+ if ((g_onoff == G_WLAN_SET_ON) && (dev != NULL)) {
+
+ if ((error = dhd_dev_pno_reset(dev)) >= 0) {
+ p += snprintf(p, MAX_WX_STRING, "OK");
+ WL_TRACE(("%s: set OK\n", __FUNCTION__));
+ goto exit;
+ }
+ else WL_ERROR(("%s: failed code %d\n", __FUNCTION__, error));
+ }
+
+ p += snprintf(p, MAX_WX_STRING, "FAIL");
+
+exit:
+ wrqu->data.length = p - extra + 1;
+ net_os_wake_unlock(dev);
+ return error;
+}
+
+
+
+static int
+wl_iw_set_pno_enable(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error = -1;
+ char *p = extra;
+ int pfn_enabled;
+
+ net_os_wake_lock(dev);
+ pfn_enabled = htod32((uint)*(extra + strlen(PNOENABLE_SET_CMD) + 1) - '0');
+
+ if ((g_onoff == G_WLAN_SET_ON) && (dev != NULL)) {
+
+ if ((error = dhd_dev_pno_enable(dev, pfn_enabled)) >= 0) {
+ p += snprintf(p, MAX_WX_STRING, "OK");
+ WL_TRACE(("%s: set OK\n", __FUNCTION__));
+ goto exit;
+ }
+ else WL_ERROR(("%s: failed code %d\n", __FUNCTION__, error));
+ }
+
+ p += snprintf(p, MAX_WX_STRING, "FAIL");
+
+exit:
+ wrqu->data.length = p - extra + 1;
+ net_os_wake_unlock(dev);
+ return error;
+}
+
+
+
+static int
+wl_iw_set_pno_set(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int res = -1;
+ wlc_ssid_t ssids_local[MAX_PFN_LIST_COUNT];
+ int nssid = 0;
+ cmd_tlv_t *cmd_tlv_temp;
+ char *str_ptr;
+ char *str_ptr_end;
+ int tlv_size_left;
+ int pno_time;
+
+#ifdef PNO_SET_DEBUG
+ int i;
+ char pno_in_example[] = {'P', 'N', 'O', 'S', 'E', 'T', 'U', 'P', ' ', \
+ 'S', '1', '2', '0',
+ 'S',
+ 0x04,
+ 'B', 'R', 'C', 'M',
+ 'S',
+ 0x04,
+ 'G', 'O', 'O', 'G',
+ 'T',
+ '1','E',
+ 0x00
+ };
+#endif
+
+ net_os_wake_lock(dev);
+ WL_ERROR(("\n### %s: info->cmd:%x, info->flags:%x, u.data=0x%p, u.len=%d\n",
+ __FUNCTION__, info->cmd, info->flags,
+ wrqu->data.pointer, wrqu->data.length));
+
+ if (g_onoff == G_WLAN_SET_OFF) {
+ WL_TRACE(("%s: driver is not up yet after START\n", __FUNCTION__));
+ goto exit_proc;
+ }
+
+ if (wrqu->data.length < (strlen(PNOSETUP_SET_CMD) + sizeof(cmd_tlv_t))) {
+ WL_ERROR(("%s aggument=%d less %d\n", __FUNCTION__, \
+ wrqu->data.length, strlen(PNOSETUP_SET_CMD) + sizeof(cmd_tlv_t)));
+ goto exit_proc;
+ }
+
+#ifdef PNO_SET_DEBUG
+ if (!(extra = kmalloc(sizeof(pno_in_example) +100, GFP_KERNEL))) {
+ res = -ENOMEM;
+ goto exit_proc;
+ }
+ memcpy(extra, pno_in_example, sizeof(pno_in_example));
+ wrqu->data.length = sizeof(pno_in_example);
+ for (i = 0; i < wrqu->data.length; i++)
+ printf("%02X ", extra[i]);
+ printf("\n");
+#endif
+
+ str_ptr = extra;
+#ifdef PNO_SET_DEBUG
+ str_ptr += strlen("PNOSETUP ");
+ tlv_size_left = wrqu->data.length - strlen("PNOSETUP ");
+#else
+ str_ptr += strlen(PNOSETUP_SET_CMD);
+ tlv_size_left = wrqu->data.length - strlen(PNOSETUP_SET_CMD);
+#endif
+
+ cmd_tlv_temp = (cmd_tlv_t *)str_ptr;
+ memset(ssids_local, 0, sizeof(ssids_local));
+
+ if ((cmd_tlv_temp->prefix == PNO_TLV_PREFIX) && \
+ (cmd_tlv_temp->version == PNO_TLV_VERSION) && \
+ (cmd_tlv_temp->subver == PNO_TLV_SUBVERSION))
+ {
+ str_ptr += sizeof(cmd_tlv_t);
+ tlv_size_left -= sizeof(cmd_tlv_t);
+
+ if ((nssid = wl_iw_parse_ssid_list_tlv(&str_ptr, ssids_local, \
+ MAX_PFN_LIST_COUNT, &tlv_size_left)) <= 0) {
+ WL_ERROR(("SSID is not presented or corrupted ret=%d\n", nssid));
+ goto exit_proc;
+ }
+ else {
+ if ((str_ptr[0] != PNO_TLV_TYPE_TIME) || (tlv_size_left <= 1)) {
+ WL_ERROR(("%s scan duration corrupted field size %d\n", \
+ __FUNCTION__, tlv_size_left));
+ goto exit_proc;
+ }
+ str_ptr++;
+ pno_time = simple_strtoul(str_ptr, &str_ptr_end, 16);
+ WL_ERROR((" got %d bytes left pno_time %d or %#x\n", \
+ tlv_size_left, pno_time, pno_time));
+ }
+ }
+ else {
+ WL_ERROR(("%s get wrong TLV command\n", __FUNCTION__));
+ goto exit_proc;
+ }
+
+ res = dhd_dev_pno_set(dev, ssids_local, nssid, pno_time);
+
+exit_proc:
+ net_os_wake_unlock(dev);
+ return res;
+}
+#endif
+
+static int
+wl_iw_get_rssi(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ static int rssi = 0;
+ static wlc_ssid_t ssid = {0};
+ int error = 0;
+ char *p = extra;
+ static char ssidbuf[SSID_FMT_BUF_LEN];
+ scb_val_t scb_val;
+
+ net_os_wake_lock(dev);
+
+ bzero(&scb_val, sizeof(scb_val_t));
+
+ if (g_onoff == G_WLAN_SET_ON) {
+ error = dev_wlc_ioctl(dev, WLC_GET_RSSI, &scb_val, sizeof(scb_val_t));
+ if (error) {
+ WL_ERROR(("%s: Fails %d\n", __FUNCTION__, error));
+ } else {
+ rssi = dtoh32(scb_val.val);
+
+ error = dev_wlc_ioctl(dev, WLC_GET_SSID, &ssid, sizeof(ssid));
+ if (!error) {
+ ssid.SSID_len = dtoh32(ssid.SSID_len);
+ wl_format_ssid(ssidbuf, ssid.SSID, dtoh32(ssid.SSID_len));
+ }
+ }
+ }
+
+ WL_ASSOC(("%s ssid_len:%d, rssi:%d\n", __FUNCTION__, ssid.SSID_len, rssi));
+
+ if (error || (ssid.SSID_len == 0)) {
+ p += snprintf(p, MAX_WX_STRING, "FAIL");
+ } else {
+ p += snprintf(p, MAX_WX_STRING, "%s rssi %d ", ssidbuf, rssi);
+ }
+ wrqu->data.length = p - extra + 1;
+
+ net_os_wake_unlock(dev);
+ return error;
+}
+
+int
+wl_iw_send_priv_event(
+ struct net_device *dev,
+ char *flag
+)
+{
+ union iwreq_data wrqu;
+ char extra[IW_CUSTOM_MAX + 1];
+ int cmd;
+
+ cmd = IWEVCUSTOM;
+ memset(&wrqu, 0, sizeof(wrqu));
+ if (strlen(flag) > sizeof(extra))
+ return -1;
+
+ strcpy(extra, flag);
+ wrqu.data.length = strlen(extra);
+ wireless_send_event(dev, cmd, &wrqu, extra);
+ net_os_wake_lock_timeout_enable(dev);
+ WL_TRACE(("Send IWEVCUSTOM Event as %s\n", extra));
+
+ return 0;
+}
+
+
+int
+wl_control_wl_start(struct net_device *dev)
+{
+ int ret = 0;
+ wl_iw_t *iw;
+
+ WL_TRACE(("Enter %s \n", __FUNCTION__));
+
+ if (!dev) {
+ WL_ERROR(("%s: dev is null\n", __FUNCTION__));
+ return -1;
+ }
+
+ iw = *(wl_iw_t **)netdev_priv(dev);
+
+ if (!iw) {
+ WL_ERROR(("%s: wl is null\n", __FUNCTION__));
+ return -1;
+ }
+ dhd_os_start_lock(iw->pub);
+
+ if (g_onoff == G_WLAN_SET_OFF) {
+ dhd_customer_gpio_wlan_ctrl(WLAN_RESET_ON);
+
+#if defined(BCMLXSDMMC)
+ sdioh_start(NULL, 0);
+#endif
+
+ ret = dhd_dev_reset(dev, 0);
+
+ if (ret == BCME_OK) {
+#if defined(BCMLXSDMMC)
+ sdioh_start(NULL, 1);
+#endif
+ dhd_dev_init_ioctl(dev);
+ g_onoff = G_WLAN_SET_ON;
+ }
+ }
+ WL_TRACE(("Exited %s \n", __FUNCTION__));
+
+ dhd_os_start_unlock(iw->pub);
+ return ret;
+}
+
+
+static int
+wl_iw_control_wl_off(
+ struct net_device *dev,
+ struct iw_request_info *info
+)
+{
+ int ret = 0;
+ wl_iw_t *iw;
+
+ WL_TRACE(("Enter %s\n", __FUNCTION__));
+
+ if (!dev) {
+ WL_ERROR(("%s: dev is null\n", __FUNCTION__));
+ return -1;
+ }
+
+ iw = *(wl_iw_t **)netdev_priv(dev);
+ if (!iw) {
+ WL_ERROR(("%s: dev is null\n", __FUNCTION__));
+ return -1;
+ }
+ dhd_os_start_lock(iw->pub);
+
+#ifdef SOFTAP
+ ap_cfg_running = FALSE;
+#endif
+
+ if (g_onoff == G_WLAN_SET_ON) {
+ g_onoff = G_WLAN_SET_OFF;
+#if defined(WL_IW_USE_ISCAN)
+ g_iscan->iscan_state = ISCAN_STATE_IDLE;
+#endif
+
+ dhd_dev_reset(dev, 1);
+
+#if defined(WL_IW_USE_ISCAN)
+#if !defined(CSCAN)
+ wl_iw_free_ss_cache();
+ wl_iw_run_ss_cache_timer(0);
+
+ g_ss_cache_ctrl.m_link_down = 1;
+#endif
+ memset(g_scan, 0, G_SCAN_RESULTS);
+ g_scan_specified_ssid = 0;
+#if defined(CONFIG_FIRST_SCAN)
+ g_first_broadcast_scan = BROADCAST_SCAN_FIRST_IDLE;
+ g_first_counter_scans = 0;
+#endif
+#endif
+
+#if defined(BCMLXSDMMC)
+ sdioh_stop(NULL);
+#endif
+
+ net_os_set_dtim_skip(dev, 0);
+
+ dhd_customer_gpio_wlan_ctrl(WLAN_RESET_OFF);
+
+ wl_iw_send_priv_event(dev, "STOP");
+ }
+
+ dhd_os_start_unlock(iw->pub);
+
+ WL_TRACE(("Exited %s\n", __FUNCTION__));
+
+ return ret;
+}
+
+static int
+wl_iw_control_wl_on(
+ struct net_device *dev,
+ struct iw_request_info *info
+)
+{
+ int ret = 0;
+
+ WL_TRACE(("Enter %s \n", __FUNCTION__));
+
+ if ((ret = wl_control_wl_start(dev)) != BCME_OK) {
+ WL_ERROR(("%s failed first attemp\n", __FUNCTION__));
+ dhd_customer_gpio_wlan_ctrl(WLAN_RESET_OFF);
+ if ((ret = wl_control_wl_start(dev)) != BCME_OK) {
+ WL_ERROR(("%s failed second attemp\n", __FUNCTION__));
+ net_os_send_hang_message(dev);
+ return ret;
+ }
+ }
+
+ wl_iw_send_priv_event(dev, "START");
+
+#ifdef SOFTAP
+ if (!ap_fw_loaded) {
+ wl_iw_iscan_set_scan_broadcast_prep(dev, 0);
+ }
+#else
+ wl_iw_iscan_set_scan_broadcast_prep(dev, 0);
+#endif
+
+ WL_TRACE(("Exited %s \n", __FUNCTION__));
+
+ return ret;
+}
+
+#ifdef SOFTAP
+static struct ap_profile my_ap;
+static int set_ap_cfg(struct net_device *dev, struct ap_profile *ap);
+static int get_assoc_sta_list(struct net_device *dev, char *buf, int len);
+static int set_ap_mac_list(struct net_device *dev, void *buf);
+
+#define PTYPE_STRING 0
+#define PTYPE_INTDEC 1
+#define PTYPE_INTHEX 2
+#define PTYPE_STR_HEX 3
+int get_parmeter_from_string(
+ char **str_ptr, const char *token, int param_type, void *dst, int param_max_len);
+
+#endif
+
+int hex2num(char c)
+{
+ if (c >= '0' && c <= '9')
+ return c - '0';
+ if (c >= 'a' && c <= 'f')
+ return c - 'a' + 10;
+ if (c >= 'A' && c <= 'F')
+ return c - 'A' + 10;
+ return -1;
+}
+
+int hex2byte(const char *hex)
+{
+ int a, b;
+ a = hex2num(*hex++);
+ if (a < 0)
+ return -1;
+ b = hex2num(*hex++);
+ if (b < 0)
+ return -1;
+ return (a << 4) | b;
+}
+
+
+
+int hstr_2_buf(const char *txt, u8 *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ int a, b;
+
+ a = hex2num(*txt++);
+ if (a < 0)
+ return -1;
+ b = hex2num(*txt++);
+ if (b < 0)
+ return -1;
+ *buf++ = (a << 4) | b;
+ }
+
+ return 0;
+}
+
+#ifdef SOFTAP
+int init_ap_profile_from_string(char *param_str, struct ap_profile *ap_cfg)
+{
+ char *str_ptr = param_str;
+ char sub_cmd[16];
+ int ret = 0;
+
+ memset(sub_cmd, 0, sizeof(sub_cmd));
+ memset(ap_cfg, 0, sizeof(struct ap_profile));
+
+ if (get_parmeter_from_string(&str_ptr, "ASCII_CMD=",
+ PTYPE_STRING, sub_cmd, SSID_LEN) != 0) {
+ return -1;
+ }
+ if (strncmp(sub_cmd, "AP_CFG", 6)) {
+ WL_ERROR(("ERROR: sub_cmd:%s != 'AP_CFG'!\n", sub_cmd));
+ return -1;
+ }
+
+ ret = get_parmeter_from_string(&str_ptr, "SSID=", PTYPE_STRING, ap_cfg->ssid, SSID_LEN);
+
+ ret |= get_parmeter_from_string(&str_ptr, "SEC=", PTYPE_STRING, ap_cfg->sec, SEC_LEN);
+
+ ret |= get_parmeter_from_string(&str_ptr, "KEY=", PTYPE_STRING, ap_cfg->key, KEY_LEN);
+
+ ret |= get_parmeter_from_string(&str_ptr, "CHANNEL=", PTYPE_INTDEC, &ap_cfg->channel, 5);
+
+ get_parmeter_from_string(&str_ptr, "PREAMBLE=", PTYPE_INTDEC, &ap_cfg->preamble, 5);
+
+ get_parmeter_from_string(&str_ptr, "MAX_SCB=", PTYPE_INTDEC, &ap_cfg->max_scb, 5);
+
+ get_parmeter_from_string(&str_ptr, "HIDDEN=", PTYPE_INTDEC, &ap_cfg->closednet, 5);
+
+ get_parmeter_from_string(&str_ptr, "COUNTRY=", PTYPE_STRING, &ap_cfg->country_code, 3);
+
+ return ret;
+}
+#endif
+
+
+#ifdef SOFTAP
+static int iwpriv_set_ap_config(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *ext)
+{
+ int res = 0;
+ char *extra = NULL;
+ struct ap_profile *ap_cfg = &my_ap;
+
+ WL_TRACE(("%s: info->cmd:%x, info->flags:%x, u.data:%p, u.len:%d\n",
+ __FUNCTION__,
+ info->cmd, info->flags,
+ wrqu->data.pointer, wrqu->data.length));
+
+ if (wrqu->data.length != 0) {
+
+ char *str_ptr;
+
+ if (!(extra = kmalloc(wrqu->data.length+1, GFP_KERNEL)))
+ return -ENOMEM;
+
+ if (copy_from_user(extra, wrqu->data.pointer, wrqu->data.length)) {
+ kfree(extra);
+ return -EFAULT;
+ }
+
+ extra[wrqu->data.length] = 0;
+ WL_SOFTAP((" Got str param in iw_point:\n %s\n", extra));
+
+ memset(ap_cfg, 0, sizeof(struct ap_profile));
+
+ str_ptr = extra;
+
+ if ((res = init_ap_profile_from_string(extra, ap_cfg)) < 0) {
+ WL_ERROR(("%s failed to parse %d\n", __FUNCTION__, res));
+ kfree(extra);
+ return -1;
+ }
+
+ } else {
+ WL_ERROR(("IWPRIV argument len = 0 \n"));
+ return -1;
+ }
+
+ if ((res = set_ap_cfg(dev, ap_cfg)) < 0)
+ WL_ERROR(("%s failed to set_ap_cfg %d\n", __FUNCTION__, res));
+
+ kfree(extra);
+
+ return res;
+}
+#endif
+
+
+#ifdef SOFTAP
+static int iwpriv_get_assoc_list(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *p_iwrq,
+ char *extra)
+{
+ int i, ret = 0;
+ char mac_buf[256];
+ struct maclist *sta_maclist = (struct maclist *)mac_buf;
+
+ char mac_lst[384];
+ char *p_mac_str;
+ char *p_mac_str_end;
+
+ if ((!dev) || (!extra)) {
+ return -EINVAL;
+ }
+
+ net_os_wake_lock(dev);
+
+ WL_TRACE(("\n %s: IWPRIV IOCTL: cmd:%hx, flags:%hx, extra:%p, iwp.len:%d, \
+ iwp.len:%p, iwp.flags:%x \n", __FUNCTION__, info->cmd, info->flags, \
+ extra, p_iwrq->data.length, p_iwrq->data.pointer, p_iwrq->data.flags));
+
+ memset(sta_maclist, 0, sizeof(mac_buf));
+
+ sta_maclist->count = 8;
+
+ WL_SOFTAP(("%s: net device:%s, buf_sz:%d\n",
+ __FUNCTION__, dev->name, sizeof(mac_buf)));
+
+ if ((ret = get_assoc_sta_list(dev, mac_buf, sizeof(mac_buf))) < 0) {
+ WL_ERROR(("%s: sta list ioctl error:%d\n",
+ __FUNCTION__, ret));
+ goto func_exit;
+ }
+
+ WL_SOFTAP(("%s: got %d stations\n", __FUNCTION__,
+ sta_maclist->count));
+
+ memset(mac_lst, 0, sizeof(mac_lst));
+ p_mac_str = mac_lst;
+ p_mac_str_end = &mac_lst[sizeof(mac_lst)-1];
+
+ for (i = 0; i < 8; i++) {
+ struct ether_addr *id = &sta_maclist->ea[i];
+ if (!ETHER_ISNULLADDR(id->octet)) {
+ scb_val_t scb_val;
+ int rssi = 0;
+
+ bzero(&scb_val, sizeof(scb_val_t));
+
+ if ((p_mac_str_end - p_mac_str) <= 36) {
+ WL_ERROR(("%s: mac list buf is < 36 for item[%i] item\n",
+ __FUNCTION__, i));
+ break;
+ }
+
+ p_mac_str += snprintf(p_mac_str, MAX_WX_STRING,
+ "\nMac[%d]=%02X:%02X:%02X:%02X:%02X:%02X,", i,
+ id->octet[0], id->octet[1], id->octet[2],
+ id->octet[3], id->octet[4], id->octet[5]);
+
+ bcopy(id->octet, &scb_val.ea, 6);
+ ret = dev_wlc_ioctl(dev, WLC_GET_RSSI, &scb_val, sizeof(scb_val_t));
+ if (ret < 0) {
+ snprintf(p_mac_str, MAX_WX_STRING, "RSSI:ERR");
+ WL_ERROR(("%s: RSSI ioctl error:%d\n",
+ __FUNCTION__, ret));
+ break;
+ }
+
+ rssi = dtoh32(scb_val.val);
+ p_mac_str += snprintf(p_mac_str, MAX_WX_STRING,
+ "RSSI:%d", rssi);
+ }
+ }
+
+ p_iwrq->data.length = strlen(mac_lst) + 1;
+
+ WL_SOFTAP(("%s: data to user:\n%s\n usr_ptr:%p\n", __FUNCTION__,
+ mac_lst, p_iwrq->data.pointer));
+
+ if (p_iwrq->data.length) {
+ bcopy(mac_lst, extra, p_iwrq->data.length);
+ }
+
+func_exit:
+ net_os_wake_unlock(dev);
+
+ WL_TRACE(("Exited %s \n", __FUNCTION__));
+ return ret;
+}
+#endif
+
+
+#ifdef SOFTAP
+#define MAC_FILT_MAX 8
+static int iwpriv_set_mac_filters(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *ext)
+{
+ int i, ret = -1;
+ char * extra = NULL;
+ int mac_cnt = 0;
+ int mac_mode = 0;
+ struct ether_addr *p_ea;
+ struct mac_list_set mflist_set;
+
+ WL_SOFTAP((">>> Got IWPRIV SET_MAC_FILTER IOCTL: info->cmd:%x, \
+ info->flags:%x, u.data:%p, u.len:%d\n",
+ info->cmd, info->flags,
+ wrqu->data.pointer, wrqu->data.length));
+
+ if (wrqu->data.length != 0) {
+
+ char *str_ptr;
+
+ if (!(extra = kmalloc(wrqu->data.length+1, GFP_KERNEL)))
+ return -ENOMEM;
+
+ if (copy_from_user(extra, wrqu->data.pointer, wrqu->data.length)) {
+ kfree(extra);
+ return -EFAULT;
+ }
+
+ extra[wrqu->data.length] = 0;
+ WL_SOFTAP((" Got parameter string in iw_point:\n %s \n", extra));
+
+ memset(&mflist_set, 0, sizeof(mflist_set));
+
+ str_ptr = extra;
+
+ if (get_parmeter_from_string(&str_ptr, "MAC_MODE=",
+ PTYPE_INTDEC, &mac_mode, 4) != 0) {
+ WL_ERROR(("ERROR: 'MAC_MODE=' token is missing\n"));
+ goto exit_proc;
+ }
+
+ p_ea = &mflist_set.mac_list.ea[0];
+
+ if (get_parmeter_from_string(&str_ptr, "MAC_CNT=",
+ PTYPE_INTDEC, &mac_cnt, 4) != 0) {
+ WL_ERROR(("ERROR: 'MAC_CNT=' token param is missing \n"));
+ goto exit_proc;
+ }
+
+ if (mac_cnt > MAC_FILT_MAX) {
+ WL_ERROR(("ERROR: number of MAC filters > MAX\n"));
+ goto exit_proc;
+ }
+
+ for (i=0; i < mac_cnt; i++)
+ if (get_parmeter_from_string(&str_ptr, "MAC=",
+ PTYPE_STR_HEX, &p_ea[i], 12) != 0) {
+ WL_ERROR(("ERROR: MAC_filter[%d] is missing !\n", i));
+ goto exit_proc;
+ }
+
+ WL_SOFTAP(("MAC_MODE=:%d, MAC_CNT=%d, MACs:..\n", mac_mode, mac_cnt));
+ for (i = 0; i < mac_cnt; i++) {
+ WL_SOFTAP(("mac_filt[%d]:", i));
+ print_buf(&p_ea[i], 6, 0);
+ }
+
+ mflist_set.mode = mac_mode;
+ mflist_set.mac_list.count = mac_cnt;
+ set_ap_mac_list(dev, &mflist_set);
+
+ wrqu->data.pointer = NULL;
+ wrqu->data.length = 0;
+ ret = 0;
+
+ } else {
+ WL_ERROR(("IWPRIV argument len is 0\n"));
+ return -1;
+ }
+
+ exit_proc:
+ kfree(extra);
+ return ret;
+}
+#endif
+
+
+#ifdef SOFTAP
+static int iwpriv_set_ap_sta_disassoc(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *ext)
+{
+ int res = 0;
+ char sta_mac[6] = {0, 0, 0, 0, 0, 0};
+ char cmd_buf[256];
+ char *str_ptr = cmd_buf;
+
+ WL_SOFTAP((">>%s called\n args: info->cmd:%x,"
+ " info->flags:%x, u.data.p:%p, u.data.len:%d\n",
+ __FUNCTION__, info->cmd, info->flags,
+ wrqu->data.pointer, wrqu->data.length));
+
+ if (wrqu->data.length != 0) {
+
+ if (copy_from_user(cmd_buf, wrqu->data.pointer, wrqu->data.length)) {
+ return -EFAULT;
+ }
+
+ if (get_parmeter_from_string(&str_ptr,
+ "MAC=", PTYPE_STR_HEX, sta_mac, 12) == 0) {
+ res = wl_iw_softap_deassoc_stations(dev, sta_mac);
+ } else {
+ WL_ERROR(("ERROR: STA_MAC= token not found\n"));
+ }
+ }
+
+ return res;
+}
+#endif
+
+#endif
+
+
+#if WIRELESS_EXT < 13
+struct iw_request_info
+{
+ __u16 cmd;
+ __u16 flags;
+};
+
+typedef int (*iw_handler)(struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra);
+#endif
+
+static int
+wl_iw_config_commit(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ void *zwrq,
+ char *extra
+)
+{
+ wlc_ssid_t ssid;
+ int error;
+ struct sockaddr bssid;
+
+ WL_TRACE(("%s: SIOCSIWCOMMIT\n", dev->name));
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_SSID, &ssid, sizeof(ssid))))
+ return error;
+
+ ssid.SSID_len = dtoh32(ssid.SSID_len);
+
+ if (!ssid.SSID_len)
+ return 0;
+
+ bzero(&bssid, sizeof(struct sockaddr));
+ if ((error = dev_wlc_ioctl(dev, WLC_REASSOC, &bssid, ETHER_ADDR_LEN))) {
+ WL_ERROR(("%s: WLC_REASSOC to %s failed \n", __FUNCTION__, ssid.SSID));
+ return error;
+ }
+
+ return 0;
+}
+
+static int
+wl_iw_get_name(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ char *cwrq,
+ char *extra
+)
+{
+ WL_TRACE(("%s: SIOCGIWNAME\n", dev->name));
+
+ strcpy(cwrq, "IEEE 802.11-DS");
+
+ return 0;
+}
+
+static int
+wl_iw_set_freq(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *fwrq,
+ char *extra
+)
+{
+ int error, chan;
+ uint sf = 0;
+
+ WL_TRACE(("%s %s: SIOCSIWFREQ\n", __FUNCTION__, dev->name));
+
+#if defined(SOFTAP)
+ if (ap_cfg_running) {
+ WL_TRACE(("%s:>> not executed, 'SOFT_AP is active' \n", __FUNCTION__));
+ return 0;
+ }
+#endif
+
+
+ if (fwrq->e == 0 && fwrq->m < MAXCHANNEL) {
+ chan = fwrq->m;
+ }
+
+
+ else {
+
+ if (fwrq->e >= 6) {
+ fwrq->e -= 6;
+ while (fwrq->e--)
+ fwrq->m *= 10;
+ } else if (fwrq->e < 6) {
+ while (fwrq->e++ < 6)
+ fwrq->m /= 10;
+ }
+
+ if (fwrq->m > 4000 && fwrq->m < 5000)
+ sf = WF_CHAN_FACTOR_4_G;
+
+ chan = wf_mhz2channel(fwrq->m, sf);
+ }
+ chan = htod32(chan);
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_CHANNEL, &chan, sizeof(chan))))
+ return error;
+
+ g_wl_iw_params.target_channel = chan;
+
+ return -EINPROGRESS;
+}
+
+static int
+wl_iw_get_freq(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *fwrq,
+ char *extra
+)
+{
+ channel_info_t ci;
+ int error;
+
+ WL_TRACE(("%s: SIOCGIWFREQ\n", dev->name));
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_CHANNEL, &ci, sizeof(ci))))
+ return error;
+
+ fwrq->m = dtoh32(ci.hw_channel);
+ fwrq->e = dtoh32(0);
+ return 0;
+}
+
+static int
+wl_iw_set_mode(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ __u32 *uwrq,
+ char *extra
+)
+{
+ int infra = 0, ap = 0, error = 0;
+
+ WL_TRACE(("%s: SIOCSIWMODE\n", dev->name));
+
+ switch (*uwrq) {
+ case IW_MODE_MASTER:
+ infra = ap = 1;
+ break;
+ case IW_MODE_ADHOC:
+ case IW_MODE_AUTO:
+ break;
+ case IW_MODE_INFRA:
+ infra = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ infra = htod32(infra);
+ ap = htod32(ap);
+
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_INFRA, &infra, sizeof(infra))) ||
+ (error = dev_wlc_ioctl(dev, WLC_SET_AP, &ap, sizeof(ap))))
+ return error;
+
+
+ return -EINPROGRESS;
+}
+
+static int
+wl_iw_get_mode(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ __u32 *uwrq,
+ char *extra
+)
+{
+ int error, infra = 0, ap = 0;
+
+ WL_TRACE(("%s: SIOCGIWMODE\n", dev->name));
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_INFRA, &infra, sizeof(infra))) ||
+ (error = dev_wlc_ioctl(dev, WLC_GET_AP, &ap, sizeof(ap))))
+ return error;
+
+ infra = dtoh32(infra);
+ ap = dtoh32(ap);
+ *uwrq = infra ? ap ? IW_MODE_MASTER : IW_MODE_INFRA : IW_MODE_ADHOC;
+
+ return 0;
+}
+
+static int
+wl_iw_get_range(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ struct iw_range *range = (struct iw_range *) extra;
+ wl_uint32_list_t *list;
+ wl_rateset_t rateset;
+ int8 *channels;
+ int error, i, k;
+ uint sf, ch;
+
+ int phytype;
+ int bw_cap = 0, sgi_tx = 0, nmode = 0;
+ channel_info_t ci;
+ uint8 nrate_list2copy = 0;
+ uint16 nrate_list[4][8] = { {13, 26, 39, 52, 78, 104, 117, 130},
+ {14, 29, 43, 58, 87, 116, 130, 144},
+ {27, 54, 81, 108, 162, 216, 243, 270},
+ {30, 60, 90, 120, 180, 240, 270, 300}};
+
+ WL_TRACE(("%s: SIOCGIWRANGE\n", dev->name));
+
+ if (!extra)
+ return -EINVAL;
+
+ channels = kmalloc((MAXCHANNEL+1)*4, GFP_KERNEL);
+ if (!channels) {
+ WL_ERROR(("Could not alloc channels\n"));
+ return -ENOMEM;
+ }
+ list = (wl_uint32_list_t *)channels;
+
+ dwrq->length = sizeof(struct iw_range);
+ memset(range, 0, sizeof(range));
+
+ range->min_nwid = range->max_nwid = 0;
+
+ list->count = htod32(MAXCHANNEL);
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_VALID_CHANNELS, channels, (MAXCHANNEL+1)*4))) {
+ kfree(channels);
+ return error;
+ }
+ for (i = 0; i < dtoh32(list->count) && i < IW_MAX_FREQUENCIES; i++) {
+ range->freq[i].i = dtoh32(list->element[i]);
+
+ ch = dtoh32(list->element[i]);
+ if (ch <= CH_MAX_2G_CHANNEL)
+ sf = WF_CHAN_FACTOR_2_4_G;
+ else
+ sf = WF_CHAN_FACTOR_5_G;
+
+ range->freq[i].m = wf_channel2mhz(ch, sf);
+ range->freq[i].e = 6;
+ }
+ range->num_frequency = range->num_channels = i;
+
+ range->max_qual.qual = 5;
+
+ range->max_qual.level = 0x100 - 200;
+
+ range->max_qual.noise = 0x100 - 200;
+
+ range->sensitivity = 65535;
+
+#if WIRELESS_EXT > 11
+
+ range->avg_qual.qual = 3;
+
+ range->avg_qual.level = 0x100 + WL_IW_RSSI_GOOD;
+
+ range->avg_qual.noise = 0x100 - 75;
+#endif
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_CURR_RATESET, &rateset, sizeof(rateset)))) {
+ kfree(channels);
+ return error;
+ }
+ rateset.count = dtoh32(rateset.count);
+ range->num_bitrates = rateset.count;
+ for (i = 0; i < rateset.count && i < IW_MAX_BITRATES; i++)
+ range->bitrate[i] = (rateset.rates[i]& 0x7f) * 500000;
+ dev_wlc_intvar_get(dev, "nmode", &nmode);
+ dev_wlc_ioctl(dev, WLC_GET_PHYTYPE, &phytype, sizeof(phytype));
+
+ if (nmode == 1 && phytype == WLC_PHY_TYPE_SSN) {
+ dev_wlc_intvar_get(dev, "mimo_bw_cap", &bw_cap);
+ dev_wlc_intvar_get(dev, "sgi_tx", &sgi_tx);
+ dev_wlc_ioctl(dev, WLC_GET_CHANNEL, &ci, sizeof(channel_info_t));
+ ci.hw_channel = dtoh32(ci.hw_channel);
+
+ if (bw_cap == 0 ||
+ (bw_cap == 2 && ci.hw_channel <= 14)) {
+ if (sgi_tx == 0)
+ nrate_list2copy = 0;
+ else
+ nrate_list2copy = 1;
+ }
+ if (bw_cap == 1 ||
+ (bw_cap == 2 && ci.hw_channel >= 36)) {
+ if (sgi_tx == 0)
+ nrate_list2copy = 2;
+ else
+ nrate_list2copy = 3;
+ }
+ range->num_bitrates += 8;
+ for (k = 0; i < range->num_bitrates; k++, i++) {
+
+ range->bitrate[i] = (nrate_list[nrate_list2copy][k]) * 500000;
+ }
+ }
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_PHYTYPE, &i, sizeof(i)))) {
+ kfree(channels);
+ return error;
+ }
+ i = dtoh32(i);
+ if (i == WLC_PHY_TYPE_A)
+ range->throughput = 24000000;
+ else
+ range->throughput = 1500000;
+
+ range->min_rts = 0;
+ range->max_rts = 2347;
+ range->min_frag = 256;
+ range->max_frag = 2346;
+
+ range->max_encoding_tokens = DOT11_MAX_DEFAULT_KEYS;
+ range->num_encoding_sizes = 4;
+ range->encoding_size[0] = WEP1_KEY_SIZE;
+ range->encoding_size[1] = WEP128_KEY_SIZE;
+#if WIRELESS_EXT > 17
+ range->encoding_size[2] = TKIP_KEY_SIZE;
+#else
+ range->encoding_size[2] = 0;
+#endif
+ range->encoding_size[3] = AES_KEY_SIZE;
+
+ range->min_pmp = 0;
+ range->max_pmp = 0;
+ range->min_pmt = 0;
+ range->max_pmt = 0;
+ range->pmp_flags = 0;
+ range->pm_capa = 0;
+
+ range->num_txpower = 2;
+ range->txpower[0] = 1;
+ range->txpower[1] = 255;
+ range->txpower_capa = IW_TXPOW_MWATT;
+
+#if WIRELESS_EXT > 10
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 19;
+
+ range->retry_capa = IW_RETRY_LIMIT;
+ range->retry_flags = IW_RETRY_LIMIT;
+ range->r_time_flags = 0;
+
+ range->min_retry = 1;
+ range->max_retry = 255;
+
+ range->min_r_time = 0;
+ range->max_r_time = 0;
+#endif
+
+#if WIRELESS_EXT > 17
+ range->enc_capa = IW_ENC_CAPA_WPA;
+ range->enc_capa |= IW_ENC_CAPA_CIPHER_TKIP;
+ range->enc_capa |= IW_ENC_CAPA_CIPHER_CCMP;
+#ifdef BCMWPA2
+ range->enc_capa |= IW_ENC_CAPA_WPA2;
+#endif
+
+ IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
+
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
+ IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
+ IW_EVENT_CAPA_SET(range->event_capa, IWEVTXDROP);
+ IW_EVENT_CAPA_SET(range->event_capa, IWEVMICHAELMICFAILURE);
+#ifdef BCMWPA2
+ IW_EVENT_CAPA_SET(range->event_capa, IWEVPMKIDCAND);
+#endif
+#endif
+
+ kfree(channels);
+
+ return 0;
+}
+
+static int
+rssi_to_qual(int rssi)
+{
+ if (rssi <= WL_IW_RSSI_NO_SIGNAL)
+ return 0;
+ else if (rssi <= WL_IW_RSSI_VERY_LOW)
+ return 1;
+ else if (rssi <= WL_IW_RSSI_LOW)
+ return 2;
+ else if (rssi <= WL_IW_RSSI_GOOD)
+ return 3;
+ else if (rssi <= WL_IW_RSSI_VERY_GOOD)
+ return 4;
+ else
+ return 5;
+}
+
+static int
+wl_iw_set_spy(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wl_iw_t *iw = *(wl_iw_t **)netdev_priv(dev);
+ struct sockaddr *addr = (struct sockaddr *) extra;
+ int i;
+
+ WL_TRACE(("%s: SIOCSIWSPY\n", dev->name));
+
+ if (!extra)
+ return -EINVAL;
+
+ iw->spy_num = MIN(ARRAYSIZE(iw->spy_addr), dwrq->length);
+ for (i = 0; i < iw->spy_num; i++)
+ memcpy(&iw->spy_addr[i], addr[i].sa_data, ETHER_ADDR_LEN);
+ memset(iw->spy_qual, 0, sizeof(iw->spy_qual));
+
+ return 0;
+}
+
+static int
+wl_iw_get_spy(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wl_iw_t *iw = *(wl_iw_t **)netdev_priv(dev);
+ struct sockaddr *addr = (struct sockaddr *) extra;
+ struct iw_quality *qual = (struct iw_quality *) &addr[iw->spy_num];
+ int i;
+
+ WL_TRACE(("%s: SIOCGIWSPY\n", dev->name));
+
+ if (!extra)
+ return -EINVAL;
+
+ dwrq->length = iw->spy_num;
+ for (i = 0; i < iw->spy_num; i++) {
+ memcpy(addr[i].sa_data, &iw->spy_addr[i], ETHER_ADDR_LEN);
+ addr[i].sa_family = AF_UNIX;
+ memcpy(&qual[i], &iw->spy_qual[i], sizeof(struct iw_quality));
+ iw->spy_qual[i].updated = 0;
+ }
+
+ return 0;
+}
+
+
+static int
+wl_iw_ch_to_chanspec(int ch, wl_join_params_t *join_params, int *join_params_size)
+{
+ chanspec_t chanspec = 0;
+
+ if (ch != 0) {
+
+ join_params->params.chanspec_num = 1;
+ join_params->params.chanspec_list[0] = ch;
+
+ if (join_params->params.chanspec_list[0])
+ chanspec |= WL_CHANSPEC_BAND_2G;
+ else
+ chanspec |= WL_CHANSPEC_BAND_5G;
+
+ chanspec |= WL_CHANSPEC_BW_20;
+ chanspec |= WL_CHANSPEC_CTL_SB_NONE;
+
+ *join_params_size += WL_ASSOC_PARAMS_FIXED_SIZE +
+ join_params->params.chanspec_num * sizeof(chanspec_t);
+
+ join_params->params.chanspec_list[0] &= WL_CHANSPEC_CHAN_MASK;
+ join_params->params.chanspec_list[0] |= chanspec;
+ join_params->params.chanspec_list[0] =
+ htodchanspec(join_params->params.chanspec_list[0]);
+
+ join_params->params.chanspec_num = htod32(join_params->params.chanspec_num);
+
+ WL_TRACE(("%s join_params->params.chanspec_list[0]= %X\n", \
+ __FUNCTION__, join_params->params.chanspec_list[0]));
+ }
+ return 1;
+}
+
+static int
+wl_iw_set_wap(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *awrq,
+ char *extra
+)
+{
+ int error = -EINVAL;
+ wl_join_params_t join_params;
+ int join_params_size;
+
+ WL_TRACE(("%s: SIOCSIWAP\n", dev->name));
+
+ if (awrq->sa_family != ARPHRD_ETHER) {
+ WL_ERROR(("Invalid Header...sa_family\n"));
+ return -EINVAL;
+ }
+
+
+ if (ETHER_ISBCAST(awrq->sa_data) || ETHER_ISNULLADDR(awrq->sa_data)) {
+ scb_val_t scbval;
+
+ bzero(&scbval, sizeof(scb_val_t));
+
+ (void) dev_wlc_ioctl(dev, WLC_DISASSOC, &scbval, sizeof(scb_val_t));
+ return 0;
+ }
+
+
+
+ memset(&join_params, 0, sizeof(join_params));
+ join_params_size = sizeof(join_params.ssid);
+
+ memcpy(join_params.ssid.SSID, g_ssid.SSID, g_ssid.SSID_len);
+ join_params.ssid.SSID_len = htod32(g_ssid.SSID_len);
+ memcpy(&join_params.params.bssid, awrq->sa_data, ETHER_ADDR_LEN);
+
+ WL_ASSOC(("%s target_channel=%d\n", __FUNCTION__, g_wl_iw_params.target_channel));
+ wl_iw_ch_to_chanspec(g_wl_iw_params.target_channel, &join_params, &join_params_size);
+
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_SSID, &join_params, join_params_size))) {
+ WL_ERROR(("%s Invalid ioctl data=%d\n", __FUNCTION__, error));
+ return error;
+ }
+
+ if (g_ssid.SSID_len) {
+ WL_ASSOC(("%s: join SSID=%s BSSID="MACSTR" ch=%d\n", __FUNCTION__, \
+ g_ssid.SSID, MAC2STR((u8 *)awrq->sa_data), \
+ g_wl_iw_params.target_channel));
+ }
+
+
+ memset(&g_ssid, 0, sizeof(g_ssid));
+ return 0;
+}
+
+static int
+wl_iw_get_wap(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *awrq,
+ char *extra
+)
+{
+ WL_TRACE(("%s: SIOCGIWAP\n", dev->name));
+
+ awrq->sa_family = ARPHRD_ETHER;
+ memset(awrq->sa_data, 0, ETHER_ADDR_LEN);
+
+
+ (void) dev_wlc_ioctl(dev, WLC_GET_BSSID, awrq->sa_data, ETHER_ADDR_LEN);
+
+ return 0;
+}
+
+#if WIRELESS_EXT > 17
+static int
+wl_iw_mlme(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *awrq,
+ char *extra
+)
+{
+ struct iw_mlme *mlme;
+ scb_val_t scbval;
+ int error = -EINVAL;
+
+ WL_TRACE(("%s: SIOCSIWMLME DISASSOC/DEAUTH\n", dev->name));
+
+ mlme = (struct iw_mlme *)extra;
+ if (mlme == NULL) {
+ WL_ERROR(("Invalid ioctl data.\n"));
+ return error;
+ }
+
+ scbval.val = mlme->reason_code;
+ bcopy(&mlme->addr.sa_data, &scbval.ea, ETHER_ADDR_LEN);
+
+ if (mlme->cmd == IW_MLME_DISASSOC) {
+ scbval.val = htod32(scbval.val);
+ error = dev_wlc_ioctl(dev, WLC_DISASSOC, &scbval, sizeof(scb_val_t));
+ }
+ else if (mlme->cmd == IW_MLME_DEAUTH) {
+ scbval.val = htod32(scbval.val);
+ error = dev_wlc_ioctl(dev, WLC_SCB_DEAUTHENTICATE_FOR_REASON, &scbval,
+ sizeof(scb_val_t));
+ }
+ else {
+ WL_ERROR(("Invalid ioctl data.\n"));
+ return error;
+ }
+
+ return error;
+}
+#endif
+
+#ifndef WL_IW_USE_ISCAN
+static int
+wl_iw_get_aplist(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wl_scan_results_t *list;
+ struct sockaddr *addr = (struct sockaddr *) extra;
+ struct iw_quality qual[IW_MAX_AP];
+ wl_bss_info_t *bi = NULL;
+ int error, i;
+ uint buflen = dwrq->length;
+
+ WL_TRACE(("%s: SIOCGIWAPLIST\n", dev->name));
+
+ if (!extra)
+ return -EINVAL;
+
+ list = kmalloc(buflen, GFP_KERNEL);
+ if (!list)
+ return -ENOMEM;
+ memset(list, 0, buflen);
+ list->buflen = htod32(buflen);
+ if ((error = dev_wlc_ioctl(dev, WLC_SCAN_RESULTS, list, buflen))) {
+ WL_ERROR(("%d: Scan results error %d\n", __LINE__, error));
+ kfree(list);
+ return error;
+ }
+ list->buflen = dtoh32(list->buflen);
+ list->version = dtoh32(list->version);
+ list->count = dtoh32(list->count);
+ if (list->version != WL_BSS_INFO_VERSION) {
+ WL_ERROR(("%s: list->version %d != WL_BSS_INFO_VERSION\n", \
+ __FUNCTION__, list->version));
+ kfree(list);
+ return -EINVAL;
+ }
+
+ for (i = 0, dwrq->length = 0; i < list->count && dwrq->length < IW_MAX_AP; i++) {
+ bi = bi ? (wl_bss_info_t *)((uintptr)bi + dtoh32(bi->length)) : list->bss_info;
+
+ if ((dtoh32(bi->length) > buflen) ||
+ (((uintptr)bi + dtoh32(bi->length)) > ((uintptr)list + buflen))) {
+ WL_ERROR(("%s: Scan results out of bounds: %u\n",__FUNCTION__,dtoh32(bi->length)));
+ kfree(list);
+ return -E2BIG;
+ }
+
+ if (!(dtoh16(bi->capability) & DOT11_CAP_ESS))
+ continue;
+
+ memcpy(addr[dwrq->length].sa_data, &bi->BSSID, ETHER_ADDR_LEN);
+ addr[dwrq->length].sa_family = ARPHRD_ETHER;
+ qual[dwrq->length].qual = rssi_to_qual(dtoh16(bi->RSSI));
+ qual[dwrq->length].level = 0x100 + dtoh16(bi->RSSI);
+ qual[dwrq->length].noise = 0x100 + bi->phy_noise;
+
+#if WIRELESS_EXT > 18
+ qual[dwrq->length].updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
+#else
+ qual[dwrq->length].updated = 7;
+#endif
+
+ dwrq->length++;
+ }
+
+ kfree(list);
+
+ if (dwrq->length) {
+ memcpy(&addr[dwrq->length], qual, sizeof(struct iw_quality) * dwrq->length);
+
+ dwrq->flags = 1;
+ }
+ return 0;
+}
+#endif
+
+#ifdef WL_IW_USE_ISCAN
+static int
+wl_iw_iscan_get_aplist(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wl_scan_results_t *list;
+ iscan_buf_t * buf;
+ iscan_info_t *iscan = g_iscan;
+
+ struct sockaddr *addr = (struct sockaddr *) extra;
+ struct iw_quality qual[IW_MAX_AP];
+ wl_bss_info_t *bi = NULL;
+ int i;
+
+ WL_TRACE(("%s: SIOCGIWAPLIST\n", dev->name));
+
+ if (!extra)
+ return -EINVAL;
+
+ if ((!iscan) || (iscan->sysioc_pid < 0)) {
+ WL_ERROR(("%s error\n", __FUNCTION__));
+ return 0;
+ }
+
+ buf = iscan->list_hdr;
+
+ while (buf) {
+ list = &((wl_iscan_results_t*)buf->iscan_buf)->results;
+ if (list->version != WL_BSS_INFO_VERSION) {
+ WL_ERROR(("%s : list->version %d != WL_BSS_INFO_VERSION\n", \
+ __FUNCTION__, list->version));
+ return -EINVAL;
+ }
+
+ bi = NULL;
+ for (i = 0, dwrq->length = 0; i < list->count && dwrq->length < IW_MAX_AP; i++) {
+ bi = bi ? (wl_bss_info_t *)((uintptr)bi + dtoh32(bi->length))
+ : list->bss_info;
+
+ if ((dtoh32(bi->length) > WLC_IW_ISCAN_MAXLEN) ||
+ (((uintptr)bi + dtoh32(bi->length)) > ((uintptr)list + WLC_IW_ISCAN_MAXLEN))) {
+ WL_ERROR(("%s: Scan results out of bounds: %u\n",__FUNCTION__,dtoh32(bi->length)));
+ return -E2BIG;
+ }
+
+ if (!(dtoh16(bi->capability) & DOT11_CAP_ESS))
+ continue;
+
+ memcpy(addr[dwrq->length].sa_data, &bi->BSSID, ETHER_ADDR_LEN);
+ addr[dwrq->length].sa_family = ARPHRD_ETHER;
+ qual[dwrq->length].qual = rssi_to_qual(dtoh16(bi->RSSI));
+ qual[dwrq->length].level = 0x100 + dtoh16(bi->RSSI);
+ qual[dwrq->length].noise = 0x100 + bi->phy_noise;
+
+#if WIRELESS_EXT > 18
+ qual[dwrq->length].updated = IW_QUAL_ALL_UPDATED | IW_QUAL_DBM;
+#else
+ qual[dwrq->length].updated = 7;
+#endif
+
+ dwrq->length++;
+ }
+ buf = buf->next;
+ }
+ if (dwrq->length) {
+ memcpy(&addr[dwrq->length], qual, sizeof(struct iw_quality) * dwrq->length);
+
+ dwrq->flags = 1;
+ }
+ return 0;
+}
+
+static int
+wl_iw_iscan_prep(wl_scan_params_t *params, wlc_ssid_t *ssid)
+{
+ int err = 0;
+
+ memcpy(¶ms->bssid, ðer_bcast, ETHER_ADDR_LEN);
+ params->bss_type = DOT11_BSSTYPE_ANY;
+ params->scan_type = 0;
+ params->nprobes = -1;
+ params->active_time = -1;
+ params->passive_time = -1;
+ params->home_time = -1;
+ params->channel_num = 0;
+#if defined(CONFIG_FIRST_SCAN)
+ if (g_first_broadcast_scan == BROADCAST_SCAN_FIRST_STARTED)
+ params->passive_time = 30;
+#endif
+ params->nprobes = htod32(params->nprobes);
+ params->active_time = htod32(params->active_time);
+ params->passive_time = htod32(params->passive_time);
+ params->home_time = htod32(params->home_time);
+ if (ssid && ssid->SSID_len)
+ memcpy(¶ms->ssid, ssid, sizeof(wlc_ssid_t));
+
+ return err;
+}
+
+static int
+wl_iw_iscan(iscan_info_t *iscan, wlc_ssid_t *ssid, uint16 action)
+{
+ int err = 0;
+
+ iscan->iscan_ex_params_p->version = htod32(ISCAN_REQ_VERSION);
+ iscan->iscan_ex_params_p->action = htod16(action);
+ iscan->iscan_ex_params_p->scan_duration = htod16(0);
+
+ WL_SCAN(("%s : nprobes=%d\n", __FUNCTION__, iscan->iscan_ex_params_p->params.nprobes));
+ WL_SCAN(("active_time=%d\n", iscan->iscan_ex_params_p->params.active_time));
+ WL_SCAN(("passive_time=%d\n", iscan->iscan_ex_params_p->params.passive_time));
+ WL_SCAN(("home_time=%d\n", iscan->iscan_ex_params_p->params.home_time));
+ WL_SCAN(("scan_type=%d\n", iscan->iscan_ex_params_p->params.scan_type));
+ WL_SCAN(("bss_type=%d\n", iscan->iscan_ex_params_p->params.bss_type));
+
+ if ((err = dev_iw_iovar_setbuf(iscan->dev, "iscan", iscan->iscan_ex_params_p, \
+ iscan->iscan_ex_param_size, iscan->ioctlbuf, sizeof(iscan->ioctlbuf)))) {
+ WL_ERROR(("Set ISCAN for %s failed with %d\n", __FUNCTION__, err));
+ err = -1;
+ }
+
+ return err;
+}
+
+static void
+wl_iw_timerfunc(ulong data)
+{
+ iscan_info_t *iscan = (iscan_info_t *)data;
+ if (iscan) {
+ iscan->timer_on = 0;
+ if (iscan->iscan_state != ISCAN_STATE_IDLE) {
+ WL_SCAN(("timer trigger\n"));
+ up(&iscan->sysioc_sem);
+ }
+ }
+}
+static void wl_iw_set_event_mask(struct net_device *dev)
+{
+ char eventmask[WL_EVENTING_MASK_LEN];
+ char iovbuf[WL_EVENTING_MASK_LEN + 12];
+
+ dev_iw_iovar_getbuf(dev, "event_msgs", "", 0, iovbuf, sizeof(iovbuf));
+ bcopy(iovbuf, eventmask, WL_EVENTING_MASK_LEN);
+ setbit(eventmask, WLC_E_SCAN_COMPLETE);
+ dev_iw_iovar_setbuf(dev, "event_msgs", eventmask, WL_EVENTING_MASK_LEN,
+ iovbuf, sizeof(iovbuf));
+}
+
+static uint32
+wl_iw_iscan_get(iscan_info_t *iscan)
+{
+ iscan_buf_t * buf;
+ iscan_buf_t * ptr;
+ wl_iscan_results_t * list_buf;
+ wl_iscan_results_t list;
+ wl_scan_results_t *results;
+ uint32 status;
+ int res;
+
+ mutex_lock(&wl_cache_lock);
+ if (iscan->list_cur) {
+ buf = iscan->list_cur;
+ iscan->list_cur = buf->next;
+ }
+ else {
+ buf = kmalloc(sizeof(iscan_buf_t), GFP_KERNEL);
+ if (!buf) {
+ WL_ERROR(("%s can't alloc iscan_buf_t : going to abort currect iscan\n", \
+ __FUNCTION__));
+ mutex_unlock(&wl_cache_lock);
+ return WL_SCAN_RESULTS_NO_MEM;
+ }
+ buf->next = NULL;
+ if (!iscan->list_hdr)
+ iscan->list_hdr = buf;
+ else {
+ ptr = iscan->list_hdr;
+ while (ptr->next) {
+ ptr = ptr->next;
+ }
+ ptr->next = buf;
+ }
+ }
+ memset(buf->iscan_buf, 0, WLC_IW_ISCAN_MAXLEN);
+ list_buf = (wl_iscan_results_t*)buf->iscan_buf;
+ results = &list_buf->results;
+ results->buflen = WL_ISCAN_RESULTS_FIXED_SIZE;
+ results->version = 0;
+ results->count = 0;
+
+ memset(&list, 0, sizeof(list));
+ list.results.buflen = htod32(WLC_IW_ISCAN_MAXLEN);
+ res = dev_iw_iovar_getbuf(
+ iscan->dev,
+ "iscanresults",
+ &list,
+ WL_ISCAN_RESULTS_FIXED_SIZE,
+ buf->iscan_buf,
+ WLC_IW_ISCAN_MAXLEN);
+ if (res == 0) {
+ results->buflen = dtoh32(results->buflen);
+ results->version = dtoh32(results->version);
+ results->count = dtoh32(results->count);
+ WL_SCAN(("results->count = %d\n", results->count));
+
+ WL_SCAN(("results->buflen = %d\n", results->buflen));
+ status = dtoh32(list_buf->status);
+ } else {
+ WL_ERROR(("%s returns error %d\n", __FUNCTION__, res));
+ status = WL_SCAN_RESULTS_NO_MEM;
+ }
+ mutex_unlock(&wl_cache_lock);
+ return status;
+}
+
+static void wl_iw_force_specific_scan(iscan_info_t *iscan)
+{
+ WL_SCAN(("%s force Specific SCAN for %s\n", __FUNCTION__, g_specific_ssid.SSID));
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ rtnl_lock();
+#endif
+ (void) dev_wlc_ioctl(iscan->dev, WLC_SCAN, &g_specific_ssid, sizeof(g_specific_ssid));
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ rtnl_unlock();
+#endif
+}
+
+static void wl_iw_send_scan_complete(iscan_info_t *iscan)
+{
+#ifndef SANDGATE2G
+ union iwreq_data wrqu;
+
+ memset(&wrqu, 0, sizeof(wrqu));
+
+ wireless_send_event(iscan->dev, SIOCGIWSCAN, &wrqu, NULL);
+#if defined(CONFIG_FIRST_SCAN)
+ if (g_first_broadcast_scan == BROADCAST_SCAN_FIRST_STARTED)
+ g_first_broadcast_scan = BROADCAST_SCAN_FIRST_RESULT_READY;
+#endif
+ WL_SCAN(("Send Event ISCAN complete\n"));
+#endif
+}
+
+static int
+_iscan_sysioc_thread(void *data)
+{
+ uint32 status;
+ iscan_info_t *iscan = (iscan_info_t *)data;
+ static bool iscan_pass_abort = FALSE;
+
+ DAEMONIZE("iscan_sysioc");
+
+ status = WL_SCAN_RESULTS_PARTIAL;
+ while (down_interruptible(&iscan->sysioc_sem) == 0) {
+
+ net_os_wake_lock(iscan->dev);
+
+#if defined(SOFTAP)
+ if (ap_cfg_running) {
+ WL_SCAN(("%s skipping SCAN ops in AP mode !!!\n", __FUNCTION__));
+ net_os_wake_unlock(iscan->dev);
+ continue;
+ }
+#endif
+
+ if (iscan->timer_on) {
+ iscan->timer_on = 0;
+ del_timer_sync(&iscan->timer);
+ }
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ rtnl_lock();
+#endif
+ status = wl_iw_iscan_get(iscan);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ rtnl_unlock();
+#endif
+
+ if (g_scan_specified_ssid && (iscan_pass_abort == TRUE)) {
+ WL_SCAN(("%s Get results from specific scan status=%d\n", __FUNCTION__, status));
+ wl_iw_send_scan_complete(iscan);
+ iscan_pass_abort = FALSE;
+ status = -1;
+ }
+
+ switch (status) {
+ case WL_SCAN_RESULTS_PARTIAL:
+ WL_SCAN(("iscanresults incomplete\n"));
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ rtnl_lock();
+#endif
+
+ wl_iw_iscan(iscan, NULL, WL_SCAN_ACTION_CONTINUE);
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ rtnl_unlock();
+#endif
+
+ mod_timer(&iscan->timer, jiffies + iscan->timer_ms*HZ/1000);
+ iscan->timer_on = 1;
+ break;
+ case WL_SCAN_RESULTS_SUCCESS:
+ WL_SCAN(("iscanresults complete\n"));
+ iscan->iscan_state = ISCAN_STATE_IDLE;
+ wl_iw_send_scan_complete(iscan);
+ break;
+ case WL_SCAN_RESULTS_PENDING:
+ WL_SCAN(("iscanresults pending\n"));
+
+ mod_timer(&iscan->timer, jiffies + iscan->timer_ms*HZ/1000);
+ iscan->timer_on = 1;
+ break;
+ case WL_SCAN_RESULTS_ABORTED:
+ WL_SCAN(("iscanresults aborted\n"));
+ iscan->iscan_state = ISCAN_STATE_IDLE;
+ if (g_scan_specified_ssid == 0)
+ wl_iw_send_scan_complete(iscan);
+ else {
+ iscan_pass_abort = TRUE;
+ wl_iw_force_specific_scan(iscan);
+ }
+ break;
+ case WL_SCAN_RESULTS_NO_MEM:
+ WL_SCAN(("iscanresults can't alloc memory: skip\n"));
+ iscan->iscan_state = ISCAN_STATE_IDLE;
+ break;
+ default:
+ WL_SCAN(("iscanresults returned unknown status %d\n", status));
+ break;
+ }
+
+ net_os_wake_unlock(iscan->dev);
+ }
+
+ if (iscan->timer_on) {
+ iscan->timer_on = 0;
+ del_timer_sync(&iscan->timer);
+ }
+
+ complete_and_exit(&iscan->sysioc_exited, 0);
+}
+#endif
+
+#if !defined(CSCAN)
+
+static void
+wl_iw_set_ss_cache_timer_flag(void)
+{
+ g_ss_cache_ctrl.m_timer_expired = 1;
+ WL_TRACE(("%s called\n", __FUNCTION__));
+}
+
+static int
+wl_iw_init_ss_cache_ctrl(void)
+{
+ WL_TRACE(("%s :\n", __FUNCTION__));
+ g_ss_cache_ctrl.m_prev_scan_mode = 0;
+ g_ss_cache_ctrl.m_cons_br_scan_cnt = 0;
+ g_ss_cache_ctrl.m_cache_head = NULL;
+ g_ss_cache_ctrl.m_link_down = 0;
+ g_ss_cache_ctrl.m_timer_expired = 0;
+ memset(g_ss_cache_ctrl.m_active_bssid, 0, ETHER_ADDR_LEN);
+
+ g_ss_cache_ctrl.m_timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL);
+ if (!g_ss_cache_ctrl.m_timer) {
+ return -ENOMEM;
+ }
+ g_ss_cache_ctrl.m_timer->function = (void *)wl_iw_set_ss_cache_timer_flag;
+ init_timer(g_ss_cache_ctrl.m_timer);
+
+ return 0;
+}
+
+
+
+static void
+wl_iw_free_ss_cache(void)
+{
+ wl_iw_ss_cache_t *node, *cur;
+ wl_iw_ss_cache_t **spec_scan_head;
+
+ WL_TRACE(("%s called\n", __FUNCTION__));
+
+ mutex_lock(&wl_cache_lock);
+ spec_scan_head = &g_ss_cache_ctrl.m_cache_head;
+ node = *spec_scan_head;
+
+ for (;node;) {
+ WL_TRACE(("%s : SSID - %s\n", __FUNCTION__, node->bss_info->SSID));
+ cur = node;
+ node = cur->next;
+ kfree(cur);
+ }
+ *spec_scan_head = NULL;
+ mutex_unlock(&wl_cache_lock);
+}
+
+
+
+static int
+wl_iw_run_ss_cache_timer(int kick_off)
+{
+ struct timer_list **timer;
+
+ timer = &g_ss_cache_ctrl.m_timer;
+
+ if (*timer) {
+ if (kick_off) {
+ (*timer)->expires = jiffies + 30000 * HZ / 1000;
+ add_timer(*timer);
+ WL_TRACE(("%s : timer starts \n", __FUNCTION__));
+ } else {
+ del_timer_sync(*timer);
+ WL_TRACE(("%s : timer stops \n", __FUNCTION__));
+ }
+ }
+
+ return 0;
+}
+
+
+void
+wl_iw_release_ss_cache_ctrl(void)
+{
+ WL_TRACE(("%s :\n", __FUNCTION__));
+ wl_iw_free_ss_cache();
+ wl_iw_run_ss_cache_timer(0);
+ if (g_ss_cache_ctrl.m_timer) {
+ kfree(g_ss_cache_ctrl.m_timer);
+ }
+}
+
+
+
+static void
+wl_iw_reset_ss_cache(void)
+{
+ wl_iw_ss_cache_t *node, *prev, *cur;
+ wl_iw_ss_cache_t **spec_scan_head;
+
+ mutex_lock(&wl_cache_lock);
+ spec_scan_head = &g_ss_cache_ctrl.m_cache_head;
+ node = *spec_scan_head;
+ prev = node;
+
+ for (;node;) {
+ WL_TRACE(("%s : node SSID %s \n", __FUNCTION__, node->bss_info->SSID));
+ if (!node->dirty) {
+ cur = node;
+ if (cur == *spec_scan_head) {
+ *spec_scan_head = cur->next;
+ prev = *spec_scan_head;
+ }
+ else {
+ prev->next = cur->next;
+ }
+ node = cur->next;
+
+ WL_TRACE(("%s : Del node : SSID %s\n", __FUNCTION__, cur->bss_info->SSID));
+ kfree(cur);
+ continue;
+ }
+
+ node->dirty = 0;
+ prev = node;
+ node = node->next;
+ }
+ mutex_unlock(&wl_cache_lock);
+}
+
+
+static int
+wl_iw_add_bss_to_ss_cache(wl_scan_results_t *ss_list)
+{
+
+ wl_iw_ss_cache_t *node, *prev, *leaf;
+ wl_iw_ss_cache_t **spec_scan_head;
+ wl_bss_info_t *bi = NULL;
+ int i;
+
+ if (!ss_list->count) {
+ return 0;
+ }
+
+ mutex_lock(&wl_cache_lock);
+ spec_scan_head = &g_ss_cache_ctrl.m_cache_head;
+
+ for (i = 0; i < ss_list->count; i++) {
+
+ node = *spec_scan_head;
+ prev = node;
+
+ bi = bi ? (wl_bss_info_t *)((uintptr)bi + dtoh32(bi->length)) : ss_list->bss_info;
+
+ WL_TRACE(("%s : find %d with specific SSID %s\n", __FUNCTION__, i, bi->SSID));
+ for (;node;) {
+ if (!memcmp(&node->bss_info->BSSID, &bi->BSSID, ETHER_ADDR_LEN)) {
+
+ WL_TRACE(("dirty marked : SSID %s\n", bi->SSID));
+ node->dirty = 1;
+ break;
+ }
+ prev = node;
+ node = node->next;
+ }
+
+ if (node) {
+ continue;
+ }
+ leaf = kmalloc(bi->length + WLC_IW_SS_CACHE_CTRL_FIELD_MAXLEN, GFP_KERNEL);
+ if (!leaf) {
+ WL_ERROR(("Memory alloc failure %d\n", \
+ bi->length + WLC_IW_SS_CACHE_CTRL_FIELD_MAXLEN));
+ mutex_unlock(&wl_cache_lock);
+ return -ENOMEM;
+ }
+
+ memcpy(leaf->bss_info, bi, bi->length);
+ leaf->next = NULL;
+ leaf->dirty = 1;
+ leaf->count = 1;
+ leaf->version = ss_list->version;
+
+ if (!prev) {
+ *spec_scan_head = leaf;
+ }
+ else {
+ prev->next = leaf;
+ }
+ }
+ mutex_unlock(&wl_cache_lock);
+ return 0;
+}
+
+
+static int
+wl_iw_merge_scan_cache(struct iw_request_info *info, char *extra, uint buflen_from_user,
+__u16 *merged_len)
+{
+ wl_iw_ss_cache_t *node;
+ wl_scan_results_t *list_merge;
+
+ mutex_lock(&wl_cache_lock);
+ node = g_ss_cache_ctrl.m_cache_head;
+ for (;node;) {
+ list_merge = (wl_scan_results_t *)&node->buflen;
+ WL_TRACE(("%s: Cached Specific APs list=%d\n", __FUNCTION__, list_merge->count));
+ if (buflen_from_user - *merged_len > 0) {
+ *merged_len += (__u16) wl_iw_get_scan_prep(list_merge, info,
+ extra + *merged_len, buflen_from_user - *merged_len);
+ }
+ else {
+ WL_TRACE(("%s: exit with break\n", __FUNCTION__));
+ break;
+ }
+ node = node->next;
+ }
+ mutex_unlock(&wl_cache_lock);
+ return 0;
+}
+
+
+static int
+wl_iw_delete_bss_from_ss_cache(void *addr)
+{
+
+ wl_iw_ss_cache_t *node, *prev;
+ wl_iw_ss_cache_t **spec_scan_head;
+
+ mutex_lock(&wl_cache_lock);
+ spec_scan_head = &g_ss_cache_ctrl.m_cache_head;
+ node = *spec_scan_head;
+ prev = node;
+ for (;node;) {
+ if (!memcmp(&node->bss_info->BSSID, addr, ETHER_ADDR_LEN)) {
+ if (node == *spec_scan_head) {
+ *spec_scan_head = node->next;
+ }
+ else {
+ prev->next = node->next;
+ }
+
+ WL_TRACE(("%s : Del node : %s\n", __FUNCTION__, node->bss_info->SSID));
+ kfree(node);
+ break;
+ }
+
+ prev = node;
+ node = node->next;
+ }
+
+ memset(addr, 0, ETHER_ADDR_LEN);
+ mutex_unlock(&wl_cache_lock);
+ return 0;
+}
+
+#endif
+
+
+static int
+wl_iw_set_scan(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int error;
+ WL_TRACE(("%s dev:%s: SIOCSIWSCAN : SCAN\n", __FUNCTION__, dev->name));
+
+#if defined(CSCAN)
+ WL_ERROR(("%s: Scan from SIOCGIWSCAN not supported\n", __FUNCTION__));
+ return -EINVAL;
+#endif
+
+#if defined(SOFTAP)
+ if (ap_cfg_running) {
+ WL_TRACE(("\n>%s: Not executed, reason -'SOFTAP is active'\n", __FUNCTION__));
+ return 0;
+ }
+#endif
+
+ if (g_onoff == G_WLAN_SET_OFF)
+ return 0;
+
+ memset(&g_specific_ssid, 0, sizeof(g_specific_ssid));
+#ifndef WL_IW_USE_ISCAN
+ g_scan_specified_ssid = 0;
+#endif
+
+#if WIRELESS_EXT > 17
+
+ if (wrqu->data.length == sizeof(struct iw_scan_req)) {
+ if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
+ struct iw_scan_req *req = (struct iw_scan_req *)extra;
+#if defined(CONFIG_FIRST_SCAN)
+ if (g_first_broadcast_scan != BROADCAST_SCAN_FIRST_RESULT_CONSUMED) {
+ WL_ERROR(("%s Ignoring SC %s first BC is not done = %d\n", \
+ __FUNCTION__, req->essid, \
+ g_first_broadcast_scan));
+ return -EBUSY;
+ }
+#endif
+ if (g_scan_specified_ssid) {
+ WL_SCAN(("%s Specific SCAN is not done ignore scan for = %s \n", \
+ __FUNCTION__, req->essid));
+ return -EBUSY;
+ }
+ else {
+ g_specific_ssid.SSID_len = MIN(sizeof(g_specific_ssid.SSID), \
+ req->essid_len);
+ memcpy(g_specific_ssid.SSID, req->essid, g_specific_ssid.SSID_len);
+ g_specific_ssid.SSID_len = htod32(g_specific_ssid.SSID_len);
+ g_scan_specified_ssid = 1;
+ WL_TRACE(("### Specific scan ssid=%s len=%d\n", \
+ g_specific_ssid.SSID, g_specific_ssid.SSID_len));
+ }
+ }
+ }
+#endif
+
+ if ((error = dev_wlc_ioctl(dev, WLC_SCAN, &g_specific_ssid, sizeof(g_specific_ssid)))) {
+ WL_SCAN(("Set SCAN for %s failed with %d\n", g_specific_ssid.SSID, error));
+ g_scan_specified_ssid = 0;
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+#ifdef WL_IW_USE_ISCAN
+int
+wl_iw_iscan_set_scan_broadcast_prep(struct net_device *dev, uint flag)
+{
+ wlc_ssid_t ssid;
+ iscan_info_t *iscan = g_iscan;
+
+#if defined(CONFIG_FIRST_SCAN)
+ if (g_first_broadcast_scan == BROADCAST_SCAN_FIRST_IDLE) {
+ g_first_broadcast_scan = BROADCAST_SCAN_FIRST_STARTED;
+ WL_SCAN(("%s: First Brodcast scan was forced\n", __FUNCTION__));
+ }
+ else if (g_first_broadcast_scan == BROADCAST_SCAN_FIRST_STARTED) {
+ WL_SCAN(("%s: ignore ISCAN request first BS is not done yet\n", __FUNCTION__));
+ return 0;
+ }
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ if (flag)
+ rtnl_lock();
+#endif
+
+ dev_wlc_ioctl(dev, WLC_SET_PASSIVE_SCAN, &iscan->scan_flag, sizeof(iscan->scan_flag));
+ wl_iw_set_event_mask(dev);
+
+ WL_SCAN(("+++: Set Broadcast ISCAN\n"));
+
+ memset(&ssid, 0, sizeof(ssid));
+
+ iscan->list_cur = iscan->list_hdr;
+ iscan->iscan_state = ISCAN_STATE_SCANING;
+
+ memset(&iscan->iscan_ex_params_p->params, 0, iscan->iscan_ex_param_size);
+ wl_iw_iscan_prep(&iscan->iscan_ex_params_p->params, &ssid);
+ wl_iw_iscan(iscan, &ssid, WL_SCAN_ACTION_START);
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ if (flag)
+ rtnl_unlock();
+#endif
+
+ mod_timer(&iscan->timer, jiffies + iscan->timer_ms*HZ/1000);
+
+ iscan->timer_on = 1;
+
+ return 0;
+}
+
+static int
+wl_iw_iscan_set_scan(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ wlc_ssid_t ssid;
+ iscan_info_t *iscan = g_iscan;
+ int ret = 0;
+
+ WL_SCAN(("%s: SIOCSIWSCAN : ISCAN\n", dev->name));
+
+#if defined(CSCAN)
+ WL_ERROR(("%s: Scan from SIOCGIWSCAN not supported\n", __FUNCTION__));
+ return -EINVAL;
+#endif
+
+ net_os_wake_lock(dev);
+
+#if defined(SOFTAP)
+ if (ap_cfg_running) {
+ WL_SCAN(("\n>%s: Not executed, reason -'SOFTAP is active'\n", __FUNCTION__));
+ goto set_scan_end;
+ }
+#endif
+
+ if (g_onoff == G_WLAN_SET_OFF) {
+ WL_SCAN(("%s: driver is not up yet after START\n", __FUNCTION__));
+ goto set_scan_end;
+ }
+
+#ifdef PNO_SUPPORT
+ if (dhd_dev_get_pno_status(dev)) {
+ WL_SCAN(("%s: Scan called when PNO is active\n", __FUNCTION__));
+ }
+#endif
+
+ if ((!iscan) || (iscan->sysioc_pid < 0)) {
+ WL_ERROR(("%s error\n", __FUNCTION__));
+ goto set_scan_end;
+ }
+
+ if (g_scan_specified_ssid) {
+ WL_SCAN(("%s Specific SCAN already running ignoring BC scan\n", \
+ __FUNCTION__));
+ ret = EBUSY;
+ goto set_scan_end;
+ }
+
+ memset(&ssid, 0, sizeof(ssid));
+
+#if WIRELESS_EXT > 17
+
+ if (wrqu->data.length == sizeof(struct iw_scan_req)) {
+ if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
+ int as = 0;
+ struct iw_scan_req *req = (struct iw_scan_req *)extra;
+ ssid.SSID_len = MIN(sizeof(ssid.SSID), req->essid_len);
+ memcpy(ssid.SSID, req->essid, ssid.SSID_len);
+ ssid.SSID_len = htod32(ssid.SSID_len);
+ dev_wlc_ioctl(dev, WLC_SET_PASSIVE_SCAN, &as, sizeof(as));
+ wl_iw_set_event_mask(dev);
+ ret = wl_iw_set_scan(dev, info, wrqu, extra);
+ goto set_scan_end;
+ }
+ else {
+ g_scan_specified_ssid = 0;
+
+ if (iscan->iscan_state == ISCAN_STATE_SCANING) {
+ WL_SCAN(("%s ISCAN already in progress \n", __FUNCTION__));
+ goto set_scan_end;
+ }
+ }
+ }
+#endif
+
+#if defined(CONFIG_FIRST_SCAN) && !defined(CSCAN)
+ if (g_first_broadcast_scan < BROADCAST_SCAN_FIRST_RESULT_CONSUMED) {
+ if (++g_first_counter_scans == MAX_ALLOWED_BLOCK_SCAN_FROM_FIRST_SCAN) {
+
+ WL_ERROR(("%s Clean up First scan flag which is %d\n", \
+ __FUNCTION__, g_first_broadcast_scan));
+ g_first_broadcast_scan = BROADCAST_SCAN_FIRST_RESULT_CONSUMED;
+ }
+ else {
+ WL_ERROR(("%s Ignoring Broadcast Scan:First Scan is not done yet %d\n", \
+ __FUNCTION__, g_first_counter_scans));
+ ret = -EBUSY;
+ goto set_scan_end;
+ }
+ }
+#endif
+
+ wl_iw_iscan_set_scan_broadcast_prep(dev, 0);
+
+set_scan_end:
+ net_os_wake_unlock(dev);
+ return ret;
+}
+#endif
+
+#if WIRELESS_EXT > 17
+static bool
+ie_is_wpa_ie(uint8 **wpaie, uint8 **tlvs, int *tlvs_len)
+{
+ uint8 *ie = *wpaie;
+
+ if ((ie[1] >= 6) &&
+ !bcmp((const void *)&ie[2], (const void *)(WPA_OUI "\x01"), 4)) {
+ return TRUE;
+ }
+
+ ie += ie[1] + 2;
+
+ *tlvs_len -= (int)(ie - *tlvs);
+
+ *tlvs = ie;
+ return FALSE;
+}
+
+static bool
+ie_is_wps_ie(uint8 **wpsie, uint8 **tlvs, int *tlvs_len)
+{
+ uint8 *ie = *wpsie;
+
+ if ((ie[1] >= 4) &&
+ !bcmp((const void *)&ie[2], (const void *)(WPA_OUI "\x04"), 4)) {
+ return TRUE;
+ }
+
+ ie += ie[1] + 2;
+
+ *tlvs_len -= (int)(ie - *tlvs);
+
+ *tlvs = ie;
+ return FALSE;
+}
+#endif
+
+static inline int _wpa_snprintf_hex(char *buf, size_t buf_size, const u8 *data,
+ size_t len, int uppercase)
+{
+ size_t i;
+ char *pos = buf, *end = buf + buf_size;
+ int ret;
+ if (buf_size == 0)
+ return 0;
+ for (i = 0; i < len; i++) {
+ ret = snprintf(pos, end - pos, uppercase ? "%02X" : "%02x",
+ data[i]);
+ if (ret < 0 || ret >= end - pos) {
+ end[-1] = '\0';
+ return pos - buf;
+ }
+ pos += ret;
+ }
+ end[-1] = '\0';
+ return pos - buf;
+}
+
+
+int wpa_snprintf_hex(char *buf, size_t buf_size, const u8 *data, size_t len)
+{
+ return _wpa_snprintf_hex(buf, buf_size, data, len, 0);
+}
+
+static int
+wl_iw_handle_scanresults_ies(char **event_p, char *end,
+ struct iw_request_info *info, wl_bss_info_t *bi)
+{
+#if WIRELESS_EXT > 17
+ struct iw_event iwe;
+ char *event;
+ char *buf;
+ int custom_event_len;
+
+ event = *event_p;
+ if (bi->ie_length) {
+
+ bcm_tlv_t *ie;
+ uint8 *ptr = ((uint8 *)bi) + sizeof(wl_bss_info_t);
+ int ptr_len = bi->ie_length;
+
+#ifdef BCMWPA2
+ if ((ie = bcm_parse_tlvs(ptr, ptr_len, DOT11_MNG_RSN_ID))) {
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = ie->len + 2;
+ event = IWE_STREAM_ADD_POINT(info, event, end, &iwe, (char *)ie);
+ }
+ ptr = ((uint8 *)bi) + sizeof(wl_bss_info_t);
+#endif
+
+ while ((ie = bcm_parse_tlvs(ptr, ptr_len, DOT11_MNG_WPA_ID))) {
+
+ if (ie_is_wps_ie(((uint8 **)&ie), &ptr, &ptr_len)) {
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = ie->len + 2;
+ event = IWE_STREAM_ADD_POINT(info, event, end, &iwe, (char *)ie);
+ break;
+ }
+ }
+
+ ptr = ((uint8 *)bi) + sizeof(wl_bss_info_t);
+ ptr_len = bi->ie_length;
+ while ((ie = bcm_parse_tlvs(ptr, ptr_len, DOT11_MNG_WPA_ID))) {
+ if (ie_is_wpa_ie(((uint8 **)&ie), &ptr, &ptr_len)) {
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = ie->len + 2;
+ event = IWE_STREAM_ADD_POINT(info, event, end, &iwe, (char *)ie);
+ break;
+ }
+ }
+
+ ptr = ((uint8 *)bi) + sizeof(wl_bss_info_t);
+ ptr_len = bi->ie_length;
+
+ while ((ie = bcm_parse_tlvs(ptr, ptr_len, DOT11_MNG_WAPI_ID))) {
+ WL_TRACE(("%s: found a WAPI IE...\n", __FUNCTION__));
+#ifdef WAPI_IE_USE_GENIE
+ iwe.cmd = IWEVGENIE;
+ iwe.u.data.length = ie->len + 2;
+ event = IWE_STREAM_ADD_POINT(info, event, end, &iwe, (char *)ie);
+#else
+ iwe.cmd = IWEVCUSTOM;
+ custom_event_len = strlen("wapi_ie=") + 2*(ie->len + 2);
+ iwe.u.data.length = custom_event_len;
+
+ buf = kmalloc(custom_event_len+1, GFP_KERNEL);
+ if (buf == NULL)
+ {
+ WL_ERROR(("malloc(%d) returned NULL...\n", custom_event_len));
+ break;
+ }
+
+ memcpy(buf, "wapi_ie=", 8);
+ wpa_snprintf_hex(buf + 8, 2+1, &(ie->id), 1);
+ wpa_snprintf_hex(buf + 10, 2+1, &(ie->len), 1);
+ wpa_snprintf_hex(buf + 12, 2*ie->len+1, ie->data, ie->len);
+ event = IWE_STREAM_ADD_POINT(info, event, end, &iwe, buf);
+#endif
+ break;
+ }
+ *event_p = event;
+ }
+#endif
+
+ return 0;
+}
+
+#ifndef CSCAN
+static uint
+wl_iw_get_scan_prep(
+ wl_scan_results_t *list,
+ struct iw_request_info *info,
+ char *extra,
+ short max_size)
+{
+ int i, j;
+ struct iw_event iwe;
+ wl_bss_info_t *bi = NULL;
+ char *event = extra, *end = extra + max_size - WE_ADD_EVENT_FIX, *value;
+ int ret = 0;
+ int channel;
+
+ if (!list) {
+ WL_ERROR(("%s: Null list pointer",__FUNCTION__));
+ return ret;
+ }
+
+ for (i = 0; i < list->count && i < IW_MAX_AP; i++)
+ {
+ if (list->version != WL_BSS_INFO_VERSION) {
+ WL_ERROR(("%s : list->version %d != WL_BSS_INFO_VERSION\n", \
+ __FUNCTION__, list->version));
+ return ret;
+ }
+
+ bi = bi ? (wl_bss_info_t *)((uintptr)bi + dtoh32(bi->length)) : list->bss_info;
+
+ WL_TRACE(("%s : %s\n", __FUNCTION__, bi->SSID));
+
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, &bi->BSSID, ETHER_ADDR_LEN);
+ event = IWE_STREAM_ADD_EVENT(info, event, end, &iwe, IW_EV_ADDR_LEN);
+
+ iwe.u.data.length = dtoh32(bi->SSID_len);
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ event = IWE_STREAM_ADD_POINT(info, event, end, &iwe, bi->SSID);
+
+ if (dtoh16(bi->capability) & (DOT11_CAP_ESS | DOT11_CAP_IBSS)) {
+ iwe.cmd = SIOCGIWMODE;
+ if (dtoh16(bi->capability) & DOT11_CAP_ESS)
+ iwe.u.mode = IW_MODE_INFRA;
+ else
+ iwe.u.mode = IW_MODE_ADHOC;
+ event = IWE_STREAM_ADD_EVENT(info, event, end, &iwe, IW_EV_UINT_LEN);
+ }
+
+ iwe.cmd = SIOCGIWFREQ;
+ channel = (bi->ctl_ch == 0) ? CHSPEC_CHANNEL(bi->chanspec) : bi->ctl_ch;
+ iwe.u.freq.m = wf_channel2mhz(channel,
+ channel <= CH_MAX_2G_CHANNEL ?
+ WF_CHAN_FACTOR_2_4_G : WF_CHAN_FACTOR_5_G);
+ iwe.u.freq.e = 6;
+ event = IWE_STREAM_ADD_EVENT(info, event, end, &iwe, IW_EV_FREQ_LEN);
+
+ iwe.cmd = IWEVQUAL;
+ iwe.u.qual.qual = rssi_to_qual(dtoh16(bi->RSSI));
+ iwe.u.qual.level = 0x100 + dtoh16(bi->RSSI);
+ iwe.u.qual.noise = 0x100 + bi->phy_noise;
+ event = IWE_STREAM_ADD_EVENT(info, event, end, &iwe, IW_EV_QUAL_LEN);
+
+ wl_iw_handle_scanresults_ies(&event, end, info, bi);
+
+ iwe.cmd = SIOCGIWENCODE;
+ if (dtoh16(bi->capability) & DOT11_CAP_PRIVACY)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ event = IWE_STREAM_ADD_POINT(info, event, end, &iwe, (char *)event);
+
+ if (bi->rateset.count) {
+ if (((event -extra) + IW_EV_LCP_LEN) <= (uintptr)end) {
+ value = event + IW_EV_LCP_LEN;
+ iwe.cmd = SIOCGIWRATE;
+
+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+ for (j = 0; j < bi->rateset.count && j < IW_MAX_BITRATES; j++) {
+ iwe.u.bitrate.value = (bi->rateset.rates[j] & 0x7f) * 500000;
+ value = IWE_STREAM_ADD_VALUE(info, event, value, end, &iwe,
+ IW_EV_PARAM_LEN);
+ }
+ event = value;
+ }
+ }
+ }
+
+ if ((ret = (event - extra)) < 0) {
+ WL_ERROR(("==> Wrong size\n"));
+ ret = 0;
+ }
+ WL_TRACE(("%s: size=%d bytes prepared \n", __FUNCTION__, (unsigned int)(event - extra)));
+ return (uint)ret;
+}
+
+static int
+wl_iw_get_scan(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ channel_info_t ci;
+ wl_scan_results_t *list_merge;
+ wl_scan_results_t *list = (wl_scan_results_t *) g_scan;
+ int error;
+ uint buflen_from_user = dwrq->length;
+ uint len = G_SCAN_RESULTS;
+ __u16 len_ret = 0;
+#if !defined(CSCAN)
+ __u16 merged_len = 0;
+#endif
+#if defined(WL_IW_USE_ISCAN)
+ iscan_info_t *iscan = g_iscan;
+ iscan_buf_t * p_buf;
+#if !defined(CSCAN)
+ uint32 counter = 0;
+#endif
+#endif
+ WL_TRACE(("%s: buflen_from_user %d: \n", dev->name, buflen_from_user));
+
+ if (!extra) {
+ WL_TRACE(("%s: wl_iw_get_scan return -EINVAL\n", dev->name));
+ return -EINVAL;
+ }
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_CHANNEL, &ci, sizeof(ci))))
+ return error;
+ ci.scan_channel = dtoh32(ci.scan_channel);
+ if (ci.scan_channel)
+ return -EAGAIN;
+
+#if !defined(CSCAN)
+ if (g_ss_cache_ctrl.m_timer_expired) {
+ wl_iw_free_ss_cache();
+ g_ss_cache_ctrl.m_timer_expired ^= 1;
+ }
+ if ((!g_scan_specified_ssid && g_ss_cache_ctrl.m_prev_scan_mode) ||
+ g_ss_cache_ctrl.m_cons_br_scan_cnt > 4) {
+ g_ss_cache_ctrl.m_cons_br_scan_cnt = 0;
+
+ wl_iw_reset_ss_cache();
+ }
+ g_ss_cache_ctrl.m_prev_scan_mode = g_scan_specified_ssid;
+ if (g_scan_specified_ssid) {
+ g_ss_cache_ctrl.m_cons_br_scan_cnt = 0;
+ }
+ else {
+ g_ss_cache_ctrl.m_cons_br_scan_cnt++;
+ }
+#endif
+
+ if (g_scan_specified_ssid) {
+
+ list = kmalloc(len, GFP_KERNEL);
+ if (!list) {
+ WL_TRACE(("%s: wl_iw_get_scan return -ENOMEM\n", dev->name));
+ g_scan_specified_ssid = 0;
+ return -ENOMEM;
+ }
+ }
+
+ memset(list, 0, len);
+ list->buflen = htod32(len);
+ if ((error = dev_wlc_ioctl(dev, WLC_SCAN_RESULTS, list, len))) {
+ WL_ERROR(("%s: %s : Scan_results ERROR %d\n", dev->name, __FUNCTION__, error));
+ dwrq->length = len;
+ if (g_scan_specified_ssid) {
+ g_scan_specified_ssid = 0;
+ kfree(list);
+ }
+ return 0;
+ }
+ list->buflen = dtoh32(list->buflen);
+ list->version = dtoh32(list->version);
+ list->count = dtoh32(list->count);
+
+ if (list->version != WL_BSS_INFO_VERSION) {
+ WL_ERROR(("%s : list->version %d != WL_BSS_INFO_VERSION\n",
+ __FUNCTION__, list->version));
+ if (g_scan_specified_ssid) {
+ g_scan_specified_ssid = 0;
+ kfree(list);
+ }
+ return -EINVAL;
+ }
+
+#if !defined(CSCAN)
+ if (g_scan_specified_ssid) {
+
+ wl_iw_add_bss_to_ss_cache(list);
+ kfree(list);
+ }
+
+ mutex_lock(&wl_cache_lock);
+#if defined(WL_IW_USE_ISCAN)
+ if (g_scan_specified_ssid)
+ WL_TRACE(("%s: Specified scan APs from scan=%d\n", __FUNCTION__, list->count));
+ p_buf = iscan->list_hdr;
+
+ while (p_buf != iscan->list_cur) {
+ list_merge = &((wl_iscan_results_t*)p_buf->iscan_buf)->results;
+ WL_TRACE(("%s: Bcast APs list=%d\n", __FUNCTION__, list_merge->count));
+ counter += list_merge->count;
+ if (list_merge->count > 0)
+ len_ret += (__u16) wl_iw_get_scan_prep(list_merge, info,
+ extra+len_ret, buflen_from_user -len_ret);
+ p_buf = p_buf->next;
+ }
+ WL_TRACE(("%s merged with total Bcast APs=%d\n", __FUNCTION__, counter));
+#else
+ list_merge = (wl_scan_results_t *) g_scan;
+ len_ret = (__u16) wl_iw_get_scan_prep(list_merge, info, extra, buflen_from_user);
+#endif
+ mutex_unlock(&wl_cache_lock);
+ if (g_ss_cache_ctrl.m_link_down) {
+ wl_iw_delete_bss_from_ss_cache(g_ss_cache_ctrl.m_active_bssid);
+ }
+
+ wl_iw_merge_scan_cache(info, extra+len_ret, buflen_from_user-len_ret, &merged_len);
+ len_ret += merged_len;
+ wl_iw_run_ss_cache_timer(0);
+ wl_iw_run_ss_cache_timer(1);
+#else
+
+ if (g_scan_specified_ssid) {
+ WL_TRACE(("%s: Specified scan APs in the list =%d\n", __FUNCTION__, list->count));
+ len_ret = (__u16) wl_iw_get_scan_prep(list, info, extra, buflen_from_user);
+ kfree(list);
+
+#if defined(WL_IW_USE_ISCAN)
+ p_buf = iscan->list_hdr;
+
+ while (p_buf != iscan->list_cur) {
+ list_merge = &((wl_iscan_results_t*)p_buf->iscan_buf)->results;
+ WL_TRACE(("%s: Bcast APs list=%d\n", __FUNCTION__, list_merge->count));
+ if (list_merge->count > 0)
+ len_ret += (__u16) wl_iw_get_scan_prep(list_merge, info,
+ extra+len_ret, buflen_from_user -len_ret);
+ p_buf = p_buf->next;
+ }
+#else
+ list_merge = (wl_scan_results_t *) g_scan;
+ WL_TRACE(("%s: Bcast APs list=%d\n", __FUNCTION__, list_merge->count));
+ if (list_merge->count > 0)
+ len_ret += (__u16) wl_iw_get_scan_prep(list_merge, info, extra+len_ret,
+ buflen_from_user -len_ret);
+#endif
+ }
+ else {
+ list = (wl_scan_results_t *) g_scan;
+ len_ret = (__u16) wl_iw_get_scan_prep(list, info, extra, buflen_from_user);
+ }
+#endif
+
+#if defined(WL_IW_USE_ISCAN)
+
+ g_scan_specified_ssid = 0;
+#endif
+
+ if ((len_ret + WE_ADD_EVENT_FIX) < buflen_from_user)
+ len = len_ret;
+
+ dwrq->length = len;
+ dwrq->flags = 0;
+
+ WL_TRACE(("%s return to WE %d bytes APs=%d\n", __FUNCTION__, dwrq->length, list->count));
+ return 0;
+}
+#endif
+
+#if defined(WL_IW_USE_ISCAN)
+static int
+wl_iw_iscan_get_scan(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wl_scan_results_t *list;
+ struct iw_event iwe;
+ wl_bss_info_t *bi = NULL;
+ int ii, j;
+ int apcnt;
+ char *event = extra, *end = extra + dwrq->length, *value;
+ iscan_info_t *iscan = g_iscan;
+ iscan_buf_t * p_buf;
+ uint32 counter = 0;
+ uint8 channel;
+#if !defined(CSCAN)
+ __u16 merged_len = 0;
+ uint buflen_from_user = dwrq->length;
+#endif
+
+ WL_SCAN(("%s %s buflen_from_user %d:\n", dev->name, __FUNCTION__, dwrq->length));
+
+#if defined(SOFTAP)
+ if (ap_cfg_running) {
+ WL_TRACE(("%s: Not executed, reason -'SOFTAP is active'\n", __FUNCTION__));
+ return -EINVAL;
+ }
+#endif
+
+ if (!extra) {
+ WL_TRACE(("%s: INVALID SIOCGIWSCAN GET bad parameter\n", dev->name));
+ return -EINVAL;
+ }
+
+#if defined(CONFIG_FIRST_SCAN)
+ if (g_first_broadcast_scan < BROADCAST_SCAN_FIRST_RESULT_READY) {
+ WL_TRACE(("%s %s: first ISCAN results are NOT ready yet \n", \
+ dev->name, __FUNCTION__));
+ return -EAGAIN;
+ }
+#endif
+
+ if ((!iscan) || (iscan->sysioc_pid < 0)) {
+ WL_ERROR(("%ssysioc_pid\n", __FUNCTION__));
+ return -EAGAIN;
+ }
+
+#if !defined(CSCAN)
+ if (g_ss_cache_ctrl.m_timer_expired) {
+ wl_iw_free_ss_cache();
+ g_ss_cache_ctrl.m_timer_expired ^= 1;
+ }
+ if (g_scan_specified_ssid) {
+ return wl_iw_get_scan(dev, info, dwrq, extra);
+ }
+ else {
+ if (g_ss_cache_ctrl.m_link_down) {
+ wl_iw_delete_bss_from_ss_cache(g_ss_cache_ctrl.m_active_bssid);
+ }
+ if (g_ss_cache_ctrl.m_prev_scan_mode || g_ss_cache_ctrl.m_cons_br_scan_cnt > 4) {
+ g_ss_cache_ctrl.m_cons_br_scan_cnt = 0;
+
+ wl_iw_reset_ss_cache();
+ }
+ g_ss_cache_ctrl.m_prev_scan_mode = g_scan_specified_ssid;
+ g_ss_cache_ctrl.m_cons_br_scan_cnt++;
+ }
+#endif
+
+ WL_TRACE(("%s: SIOCGIWSCAN GET broadcast results\n", dev->name));
+ apcnt = 0;
+ p_buf = iscan->list_hdr;
+
+ while (p_buf != iscan->list_cur) {
+ list = &((wl_iscan_results_t*)p_buf->iscan_buf)->results;
+
+ counter += list->count;
+
+ if (list->version != WL_BSS_INFO_VERSION) {
+ WL_ERROR(("%s : list->version %d != WL_BSS_INFO_VERSION\n",
+ __FUNCTION__, list->version));
+ return -EINVAL;
+ }
+
+ bi = NULL;
+ for (ii = 0; ii < list->count && apcnt < IW_MAX_AP; apcnt++, ii++) {
+ bi = bi ? (wl_bss_info_t *)((uintptr)bi + dtoh32(bi->length)) : list->bss_info;
+
+ if ((dtoh32(bi->length) > WLC_IW_ISCAN_MAXLEN) ||
+ (((uintptr)bi + dtoh32(bi->length)) > ((uintptr)list + WLC_IW_ISCAN_MAXLEN))) {
+ WL_ERROR(("%s: Scan results out of bounds: %u\n",__FUNCTION__,dtoh32(bi->length)));
+ return -E2BIG;
+ }
+
+ if (event + ETHER_ADDR_LEN + bi->SSID_len + IW_EV_UINT_LEN + IW_EV_FREQ_LEN +
+ IW_EV_QUAL_LEN >= end)
+ return -E2BIG;
+
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, &bi->BSSID, ETHER_ADDR_LEN);
+ event = IWE_STREAM_ADD_EVENT(info, event, end, &iwe, IW_EV_ADDR_LEN);
+
+ iwe.u.data.length = dtoh32(bi->SSID_len);
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ event = IWE_STREAM_ADD_POINT(info, event, end, &iwe, bi->SSID);
+
+ if (dtoh16(bi->capability) & (DOT11_CAP_ESS | DOT11_CAP_IBSS)) {
+ iwe.cmd = SIOCGIWMODE;
+ if (dtoh16(bi->capability) & DOT11_CAP_ESS)
+ iwe.u.mode = IW_MODE_INFRA;
+ else
+ iwe.u.mode = IW_MODE_ADHOC;
+ event = IWE_STREAM_ADD_EVENT(info, event, end, &iwe, IW_EV_UINT_LEN);
+ }
+
+ iwe.cmd = SIOCGIWFREQ;
+ channel = (bi->ctl_ch == 0) ? CHSPEC_CHANNEL(bi->chanspec) : bi->ctl_ch;
+ iwe.u.freq.m = wf_channel2mhz(channel,
+ channel <= CH_MAX_2G_CHANNEL ?
+ WF_CHAN_FACTOR_2_4_G : WF_CHAN_FACTOR_5_G);
+ iwe.u.freq.e = 6;
+ event = IWE_STREAM_ADD_EVENT(info, event, end, &iwe, IW_EV_FREQ_LEN);
+
+ iwe.cmd = IWEVQUAL;
+ iwe.u.qual.qual = rssi_to_qual(dtoh16(bi->RSSI));
+ iwe.u.qual.level = 0x100 + dtoh16(bi->RSSI);
+ iwe.u.qual.noise = 0x100 + bi->phy_noise;
+ event = IWE_STREAM_ADD_EVENT(info, event, end, &iwe, IW_EV_QUAL_LEN);
+
+ wl_iw_handle_scanresults_ies(&event, end, info, bi);
+
+ iwe.cmd = SIOCGIWENCODE;
+ if (dtoh16(bi->capability) & DOT11_CAP_PRIVACY)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ event = IWE_STREAM_ADD_POINT(info, event, end, &iwe, (char *)event);
+
+ if (bi->rateset.count) {
+ if (event + IW_MAX_BITRATES*IW_EV_PARAM_LEN >= end)
+ return -E2BIG;
+
+ value = event + IW_EV_LCP_LEN;
+ iwe.cmd = SIOCGIWRATE;
+
+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+ for (j = 0; j < bi->rateset.count && j < IW_MAX_BITRATES; j++) {
+ iwe.u.bitrate.value = (bi->rateset.rates[j] & 0x7f) * 500000;
+ value = IWE_STREAM_ADD_VALUE(info, event, value, end, &iwe,
+ IW_EV_PARAM_LEN);
+ }
+ event = value;
+ }
+ }
+ p_buf = p_buf->next;
+ }
+
+ dwrq->length = event - extra;
+ dwrq->flags = 0;
+
+#if !defined(CSCAN)
+ wl_iw_merge_scan_cache(info, event, buflen_from_user - dwrq->length, &merged_len);
+ dwrq->length += merged_len;
+ wl_iw_run_ss_cache_timer(0);
+ wl_iw_run_ss_cache_timer(1);
+#endif /* CSCAN */
+#if defined(CONFIG_FIRST_SCAN)
+ g_first_broadcast_scan = BROADCAST_SCAN_FIRST_RESULT_CONSUMED;
+#endif
+
+ WL_TRACE(("%s return to WE %d bytes APs=%d\n", __FUNCTION__, dwrq->length, counter));
+
+ return 0;
+}
+#endif
+
+static int
+wl_iw_set_essid(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ int error;
+ wl_join_params_t join_params;
+ int join_params_size;
+
+ WL_TRACE(("%s: SIOCSIWESSID\n", dev->name));
+
+
+ memset(&g_ssid, 0, sizeof(g_ssid));
+
+ CHECK_EXTRA_FOR_NULL(extra);
+
+ if (dwrq->length && extra) {
+#if WIRELESS_EXT > 20
+ g_ssid.SSID_len = MIN(sizeof(g_ssid.SSID), dwrq->length);
+#else
+ g_ssid.SSID_len = MIN(sizeof(g_ssid.SSID), dwrq->length-1);
+#endif
+ memcpy(g_ssid.SSID, extra, g_ssid.SSID_len);
+ } else {
+
+ g_ssid.SSID_len = 0;
+ }
+ g_ssid.SSID_len = htod32(g_ssid.SSID_len);
+
+ memset(&join_params, 0, sizeof(join_params));
+ join_params_size = sizeof(join_params.ssid);
+
+ memcpy(&join_params.ssid.SSID, g_ssid.SSID, g_ssid.SSID_len);
+ join_params.ssid.SSID_len = htod32(g_ssid.SSID_len);
+ memcpy(&join_params.params.bssid, ðer_bcast, ETHER_ADDR_LEN);
+
+ wl_iw_ch_to_chanspec(g_wl_iw_params.target_channel, &join_params, &join_params_size);
+
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_SSID, &join_params, join_params_size))) {
+ WL_ERROR(("Invalid ioctl data=%d\n", error));
+ return error;
+ }
+
+ if (g_ssid.SSID_len) {
+ WL_TRACE(("%s: join SSID=%s ch=%d\n", __FUNCTION__, \
+ g_ssid.SSID, g_wl_iw_params.target_channel));
+ }
+ return 0;
+}
+
+static int
+wl_iw_get_essid(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wlc_ssid_t ssid;
+ int error;
+
+ WL_TRACE(("%s: SIOCGIWESSID\n", dev->name));
+
+ if (!extra)
+ return -EINVAL;
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_SSID, &ssid, sizeof(ssid)))) {
+ WL_ERROR(("Error getting the SSID\n"));
+ return error;
+ }
+
+ ssid.SSID_len = dtoh32(ssid.SSID_len);
+
+ memcpy(extra, ssid.SSID, ssid.SSID_len);
+
+ dwrq->length = ssid.SSID_len;
+
+ dwrq->flags = 1;
+
+ return 0;
+}
+
+static int
+wl_iw_set_nick(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wl_iw_t *iw = *(wl_iw_t **)netdev_priv(dev);
+
+ WL_TRACE(("%s: SIOCSIWNICKN\n", dev->name));
+
+ if (!extra)
+ return -EINVAL;
+
+ if (dwrq->length > sizeof(iw->nickname))
+ return -E2BIG;
+
+ memcpy(iw->nickname, extra, dwrq->length);
+ iw->nickname[dwrq->length - 1] = '\0';
+
+ return 0;
+}
+
+static int
+wl_iw_get_nick(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wl_iw_t *iw = *(wl_iw_t **)netdev_priv(dev);
+
+ WL_TRACE(("%s: SIOCGIWNICKN\n", dev->name));
+
+ if (!extra)
+ return -EINVAL;
+
+ strcpy(extra, iw->nickname);
+ dwrq->length = strlen(extra) + 1;
+
+ return 0;
+}
+
+static int wl_iw_set_rate(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ wl_rateset_t rateset;
+ int error, rate, i, error_bg, error_a;
+
+ WL_TRACE(("%s: SIOCSIWRATE\n", dev->name));
+
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_CURR_RATESET, &rateset, sizeof(rateset))))
+ return error;
+
+ rateset.count = dtoh32(rateset.count);
+
+ if (vwrq->value < 0) {
+
+ rate = rateset.rates[rateset.count - 1] & 0x7f;
+ } else if (vwrq->value < rateset.count) {
+
+ rate = rateset.rates[vwrq->value] & 0x7f;
+ } else {
+
+ rate = vwrq->value / 500000;
+ }
+
+ if (vwrq->fixed) {
+
+ error_bg = dev_wlc_intvar_set(dev, "bg_rate", rate);
+ error_a = dev_wlc_intvar_set(dev, "a_rate", rate);
+
+ if (error_bg && error_a)
+ return (error_bg | error_a);
+ } else {
+
+
+ error_bg = dev_wlc_intvar_set(dev, "bg_rate", 0);
+
+ error_a = dev_wlc_intvar_set(dev, "a_rate", 0);
+
+ if (error_bg && error_a)
+ return (error_bg | error_a);
+
+
+ for (i = 0; i < rateset.count; i++)
+ if ((rateset.rates[i] & 0x7f) > rate)
+ break;
+ rateset.count = htod32(i);
+
+
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_RATESET, &rateset, sizeof(rateset))))
+ return error;
+ }
+
+ return 0;
+}
+
+static int wl_iw_get_rate(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, rate;
+
+ WL_TRACE(("%s: SIOCGIWRATE\n", dev->name));
+
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_RATE, &rate, sizeof(rate))))
+ return error;
+ rate = dtoh32(rate);
+ vwrq->value = rate * 500000;
+
+ return 0;
+}
+
+static int
+wl_iw_set_rts(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, rts;
+
+ WL_TRACE(("%s: SIOCSIWRTS\n", dev->name));
+
+ if (vwrq->disabled)
+ rts = DOT11_DEFAULT_RTS_LEN;
+ else if (vwrq->value < 0 || vwrq->value > DOT11_DEFAULT_RTS_LEN)
+ return -EINVAL;
+ else
+ rts = vwrq->value;
+
+ if ((error = dev_wlc_intvar_set(dev, "rtsthresh", rts)))
+ return error;
+
+ return 0;
+}
+
+static int
+wl_iw_get_rts(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, rts;
+
+ WL_TRACE(("%s: SIOCGIWRTS\n", dev->name));
+
+ if ((error = dev_wlc_intvar_get(dev, "rtsthresh", &rts)))
+ return error;
+
+ vwrq->value = rts;
+ vwrq->disabled = (rts >= DOT11_DEFAULT_RTS_LEN);
+ vwrq->fixed = 1;
+
+ return 0;
+}
+
+static int
+wl_iw_set_frag(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, frag;
+
+ WL_TRACE(("%s: SIOCSIWFRAG\n", dev->name));
+
+ if (vwrq->disabled)
+ frag = DOT11_DEFAULT_FRAG_LEN;
+ else if (vwrq->value < 0 || vwrq->value > DOT11_DEFAULT_FRAG_LEN)
+ return -EINVAL;
+ else
+ frag = vwrq->value;
+
+ if ((error = dev_wlc_intvar_set(dev, "fragthresh", frag)))
+ return error;
+
+ return 0;
+}
+
+static int
+wl_iw_get_frag(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, fragthreshold;
+
+ WL_TRACE(("%s: SIOCGIWFRAG\n", dev->name));
+
+ if ((error = dev_wlc_intvar_get(dev, "fragthresh", &fragthreshold)))
+ return error;
+
+ vwrq->value = fragthreshold;
+ vwrq->disabled = (fragthreshold >= DOT11_DEFAULT_FRAG_LEN);
+ vwrq->fixed = 1;
+
+ return 0;
+}
+
+static int
+wl_iw_set_txpow(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, disable;
+ uint16 txpwrmw;
+ WL_TRACE(("%s: SIOCSIWTXPOW\n", dev->name));
+
+
+ disable = vwrq->disabled ? WL_RADIO_SW_DISABLE : 0;
+ disable += WL_RADIO_SW_DISABLE << 16;
+
+ disable = htod32(disable);
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_RADIO, &disable, sizeof(disable))))
+ return error;
+
+
+ if (disable & WL_RADIO_SW_DISABLE)
+ return 0;
+
+
+ if (!(vwrq->flags & IW_TXPOW_MWATT))
+ return -EINVAL;
+
+
+ if (vwrq->value < 0)
+ return 0;
+
+ if (vwrq->value > 0xffff) txpwrmw = 0xffff;
+ else txpwrmw = (uint16)vwrq->value;
+
+
+ error = dev_wlc_intvar_set(dev, "qtxpower", (int)(bcm_mw_to_qdbm(txpwrmw)));
+ return error;
+}
+
+static int
+wl_iw_get_txpow(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, disable, txpwrdbm;
+ uint8 result;
+
+ WL_TRACE(("%s: SIOCGIWTXPOW\n", dev->name));
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_RADIO, &disable, sizeof(disable))) ||
+ (error = dev_wlc_intvar_get(dev, "qtxpower", &txpwrdbm)))
+ return error;
+
+ disable = dtoh32(disable);
+ result = (uint8)(txpwrdbm & ~WL_TXPWR_OVERRIDE);
+ vwrq->value = (int32)bcm_qdbm_to_mw(result);
+ vwrq->fixed = 0;
+ vwrq->disabled = (disable & (WL_RADIO_SW_DISABLE | WL_RADIO_HW_DISABLE)) ? 1 : 0;
+ vwrq->flags = IW_TXPOW_MWATT;
+
+ return 0;
+}
+
+#if WIRELESS_EXT > 10
+static int
+wl_iw_set_retry(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, lrl, srl;
+
+ WL_TRACE(("%s: SIOCSIWRETRY\n", dev->name));
+
+
+ if (vwrq->disabled || (vwrq->flags & IW_RETRY_LIFETIME))
+ return -EINVAL;
+
+
+ if (vwrq->flags & IW_RETRY_LIMIT) {
+
+
+#if WIRELESS_EXT > 20
+ if ((vwrq->flags & IW_RETRY_LONG) ||(vwrq->flags & IW_RETRY_MAX) ||
+ !((vwrq->flags & IW_RETRY_SHORT) || (vwrq->flags & IW_RETRY_MIN))) {
+#else
+ if ((vwrq->flags & IW_RETRY_MAX) || !(vwrq->flags & IW_RETRY_MIN)) {
+#endif
+ lrl = htod32(vwrq->value);
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_LRL, &lrl, sizeof(lrl))))
+ return error;
+ }
+
+
+#if WIRELESS_EXT > 20
+ if ((vwrq->flags & IW_RETRY_SHORT) ||(vwrq->flags & IW_RETRY_MIN) ||
+ !((vwrq->flags & IW_RETRY_LONG) || (vwrq->flags & IW_RETRY_MAX))) {
+#else
+ if ((vwrq->flags & IW_RETRY_MIN) || !(vwrq->flags & IW_RETRY_MAX)) {
+#endif
+ srl = htod32(vwrq->value);
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_SRL, &srl, sizeof(srl))))
+ return error;
+ }
+ }
+ return 0;
+}
+
+static int
+wl_iw_get_retry(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, lrl, srl;
+
+ WL_TRACE(("%s: SIOCGIWRETRY\n", dev->name));
+
+ vwrq->disabled = 0;
+
+
+ if ((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME)
+ return -EINVAL;
+
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_LRL, &lrl, sizeof(lrl))) ||
+ (error = dev_wlc_ioctl(dev, WLC_GET_SRL, &srl, sizeof(srl))))
+ return error;
+
+ lrl = dtoh32(lrl);
+ srl = dtoh32(srl);
+
+
+ if (vwrq->flags & IW_RETRY_MAX) {
+ vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+ vwrq->value = lrl;
+ } else {
+ vwrq->flags = IW_RETRY_LIMIT;
+ vwrq->value = srl;
+ if (srl != lrl)
+ vwrq->flags |= IW_RETRY_MIN;
+ }
+
+ return 0;
+}
+#endif
+
+static int
+wl_iw_set_encode(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wl_wsec_key_t key;
+ int error, val, wsec;
+
+ WL_TRACE(("%s: SIOCSIWENCODE\n", dev->name));
+
+ memset(&key, 0, sizeof(key));
+
+ if ((dwrq->flags & IW_ENCODE_INDEX) == 0) {
+
+ for (key.index = 0; key.index < DOT11_MAX_DEFAULT_KEYS; key.index++) {
+ val = htod32(key.index);
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_KEY_PRIMARY, &val, sizeof(val))))
+ return error;
+ val = dtoh32(val);
+ if (val)
+ break;
+ }
+
+ if (key.index == DOT11_MAX_DEFAULT_KEYS)
+ key.index = 0;
+ } else {
+ key.index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ if (key.index >= DOT11_MAX_DEFAULT_KEYS)
+ return -EINVAL;
+ }
+
+
+ if (!extra || !dwrq->length || (dwrq->flags & IW_ENCODE_NOKEY)) {
+
+ val = htod32(key.index);
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_KEY_PRIMARY, &val, sizeof(val))))
+ return error;
+ } else {
+ key.len = dwrq->length;
+
+ if (dwrq->length > sizeof(key.data))
+ return -EINVAL;
+
+ memcpy(key.data, extra, dwrq->length);
+
+ key.flags = WL_PRIMARY_KEY;
+ switch (key.len) {
+ case WEP1_KEY_SIZE:
+ key.algo = CRYPTO_ALGO_WEP1;
+ break;
+ case WEP128_KEY_SIZE:
+ key.algo = CRYPTO_ALGO_WEP128;
+ break;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 14)
+ case TKIP_KEY_SIZE:
+ key.algo = CRYPTO_ALGO_TKIP;
+ break;
+#endif
+ case AES_KEY_SIZE:
+ key.algo = CRYPTO_ALGO_AES_CCM;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+
+ swap_key_from_BE(&key);
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_KEY, &key, sizeof(key))))
+ return error;
+ }
+
+
+ val = (dwrq->flags & IW_ENCODE_DISABLED) ? 0 : WEP_ENABLED;
+
+ if ((error = dev_wlc_intvar_get(dev, "wsec", &wsec)))
+ return error;
+
+ wsec &= ~(WEP_ENABLED);
+ wsec |= val;
+
+ if ((error = dev_wlc_intvar_set(dev, "wsec", wsec)))
+ return error;
+
+
+ val = (dwrq->flags & IW_ENCODE_RESTRICTED) ? 1 : 0;
+ val = htod32(val);
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_AUTH, &val, sizeof(val))))
+ return error;
+
+ return 0;
+}
+
+static int
+wl_iw_get_encode(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wl_wsec_key_t key;
+ int error, val, wsec, auth;
+
+ WL_TRACE(("%s: SIOCGIWENCODE\n", dev->name));
+
+
+ bzero(&key, sizeof(wl_wsec_key_t));
+
+ if ((dwrq->flags & IW_ENCODE_INDEX) == 0) {
+
+ for (key.index = 0; key.index < DOT11_MAX_DEFAULT_KEYS; key.index++) {
+ val = key.index;
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_KEY_PRIMARY, &val, sizeof(val))))
+ return error;
+ val = dtoh32(val);
+ if (val)
+ break;
+ }
+ } else
+ key.index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+
+ if (key.index >= DOT11_MAX_DEFAULT_KEYS)
+ key.index = 0;
+
+
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_WSEC, &wsec, sizeof(wsec))) ||
+ (error = dev_wlc_ioctl(dev, WLC_GET_AUTH, &auth, sizeof(auth))))
+ return error;
+
+ swap_key_to_BE(&key);
+
+ wsec = dtoh32(wsec);
+ auth = dtoh32(auth);
+
+ dwrq->length = MIN(DOT11_MAX_KEY_SIZE, key.len);
+
+
+ dwrq->flags = key.index + 1;
+ if (!(wsec & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))) {
+
+ dwrq->flags |= IW_ENCODE_DISABLED;
+ }
+ if (auth) {
+
+ dwrq->flags |= IW_ENCODE_RESTRICTED;
+ }
+
+
+ if (dwrq->length && extra)
+ memcpy(extra, key.data, dwrq->length);
+
+ return 0;
+}
+
+static int
+wl_iw_set_power(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, pm;
+
+ WL_TRACE(("%s: SIOCSIWPOWER\n", dev->name));
+
+ pm = vwrq->disabled ? PM_OFF : PM_MAX;
+
+ pm = htod32(pm);
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_PM, &pm, sizeof(pm))))
+ return error;
+
+ return 0;
+}
+
+static int
+wl_iw_get_power(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error, pm;
+
+ WL_TRACE(("%s: SIOCGIWPOWER\n", dev->name));
+
+ if ((error = dev_wlc_ioctl(dev, WLC_GET_PM, &pm, sizeof(pm))))
+ return error;
+
+ pm = dtoh32(pm);
+ vwrq->disabled = pm ? 0 : 1;
+ vwrq->flags = IW_POWER_ALL_R;
+
+ return 0;
+}
+
+#if WIRELESS_EXT > 17
+static int
+wl_iw_set_wpaie(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *iwp,
+ char *extra
+)
+{
+ uchar buf[WLC_IOCTL_SMLEN] = {0};
+ uchar *p = buf;
+ int wapi_ie_size;
+
+ WL_TRACE(("%s: SIOCSIWGENIE\n", dev->name));
+
+ CHECK_EXTRA_FOR_NULL(extra);
+
+ if (extra[0] == DOT11_MNG_WAPI_ID)
+ {
+ wapi_ie_size = iwp->length;
+ memcpy(p, extra, iwp->length);
+ dev_wlc_bufvar_set(dev, "wapiie", buf, wapi_ie_size);
+ }
+ else
+ dev_wlc_bufvar_set(dev, "wpaie", extra, iwp->length);
+
+ return 0;
+}
+
+static int
+wl_iw_get_wpaie(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *iwp,
+ char *extra
+)
+{
+ WL_TRACE(("%s: SIOCGIWGENIE\n", dev->name));
+ iwp->length = 64;
+ dev_wlc_bufvar_get(dev, "wpaie", extra, iwp->length);
+ return 0;
+}
+
+static int
+wl_iw_set_encodeext(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra
+)
+{
+ wl_wsec_key_t key;
+ int error;
+ struct iw_encode_ext *iwe;
+
+ WL_WSEC(("%s: SIOCSIWENCODEEXT\n", dev->name));
+
+ CHECK_EXTRA_FOR_NULL(extra);
+
+ memset(&key, 0, sizeof(key));
+ iwe = (struct iw_encode_ext *)extra;
+
+
+ if (dwrq->flags & IW_ENCODE_DISABLED) {
+
+ }
+
+
+ key.index = 0;
+ if (dwrq->flags & IW_ENCODE_INDEX)
+ key.index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+
+ key.len = iwe->key_len;
+
+
+ if (!ETHER_ISMULTI(iwe->addr.sa_data))
+ bcopy((void *)&iwe->addr.sa_data, (char *)&key.ea, ETHER_ADDR_LEN);
+
+
+ if (key.len == 0) {
+ if (iwe->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ WL_WSEC(("Changing the the primary Key to %d\n", key.index));
+
+ key.index = htod32(key.index);
+ error = dev_wlc_ioctl(dev, WLC_SET_KEY_PRIMARY,
+ &key.index, sizeof(key.index));
+ if (error)
+ return error;
+ }
+
+ else {
+ swap_key_from_BE(&key);
+ dev_wlc_ioctl(dev, WLC_SET_KEY, &key, sizeof(key));
+ }
+ }
+ else {
+ if (iwe->key_len > sizeof(key.data))
+ return -EINVAL;
+
+ WL_WSEC(("Setting the key index %d\n", key.index));
+ if (iwe->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) {
+ WL_WSEC(("key is a Primary Key\n"));
+ key.flags = WL_PRIMARY_KEY;
+ }
+
+ bcopy((void *)iwe->key, key.data, iwe->key_len);
+
+ if (iwe->alg == IW_ENCODE_ALG_TKIP) {
+ uint8 keybuf[8];
+ bcopy(&key.data[24], keybuf, sizeof(keybuf));
+ bcopy(&key.data[16], &key.data[24], sizeof(keybuf));
+ bcopy(keybuf, &key.data[16], sizeof(keybuf));
+ }
+
+
+ if (iwe->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
+ uchar *ivptr;
+ ivptr = (uchar *)iwe->rx_seq;
+ key.rxiv.hi = (ivptr[5] << 24) | (ivptr[4] << 16) |
+ (ivptr[3] << 8) | ivptr[2];
+ key.rxiv.lo = (ivptr[1] << 8) | ivptr[0];
+ key.iv_initialized = TRUE;
+ }
+
+ switch (iwe->alg) {
+ case IW_ENCODE_ALG_NONE:
+ key.algo = CRYPTO_ALGO_OFF;
+ break;
+ case IW_ENCODE_ALG_WEP:
+ if (iwe->key_len == WEP1_KEY_SIZE)
+ key.algo = CRYPTO_ALGO_WEP1;
+ else
+ key.algo = CRYPTO_ALGO_WEP128;
+ break;
+ case IW_ENCODE_ALG_TKIP:
+ key.algo = CRYPTO_ALGO_TKIP;
+ break;
+ case IW_ENCODE_ALG_CCMP:
+ key.algo = CRYPTO_ALGO_AES_CCM;
+ break;
+ case IW_ENCODE_ALG_SM4:
+ key.algo = CRYPTO_ALGO_SMS4;
+ if (iwe->ext_flags & IW_ENCODE_EXT_GROUP_KEY) {
+ key.flags &= ~WL_PRIMARY_KEY;
+ }
+ break;
+ default:
+ break;
+ }
+ swap_key_from_BE(&key);
+
+ dhd_wait_pend8021x(dev);
+
+ error = dev_wlc_ioctl(dev, WLC_SET_KEY, &key, sizeof(key));
+ if (error)
+ return error;
+ }
+ return 0;
+}
+
+#if WIRELESS_EXT > 17
+#ifdef BCMWPA2
+struct {
+ pmkid_list_t pmkids;
+ pmkid_t foo[MAXPMKID-1];
+} pmkid_list;
+
+static int
+wl_iw_set_pmksa(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ struct iw_pmksa *iwpmksa;
+ uint i;
+ int ret = 0;
+ char eabuf[ETHER_ADDR_STR_LEN];
+
+ WL_WSEC(("%s: SIOCSIWPMKSA\n", dev->name));
+ CHECK_EXTRA_FOR_NULL(extra);
+
+ iwpmksa = (struct iw_pmksa *)extra;
+ bzero((char *)eabuf, ETHER_ADDR_STR_LEN);
+
+ if (iwpmksa->cmd == IW_PMKSA_FLUSH) {
+ WL_WSEC(("wl_iw_set_pmksa - IW_PMKSA_FLUSH\n"));
+ bzero((char *)&pmkid_list, sizeof(pmkid_list));
+ }
+
+ else if (iwpmksa->cmd == IW_PMKSA_REMOVE) {
+ {
+ pmkid_list_t pmkid, *pmkidptr;
+ uint j;
+ pmkidptr = &pmkid;
+
+ bcopy(&iwpmksa->bssid.sa_data[0], &pmkidptr->pmkid[0].BSSID, ETHER_ADDR_LEN);
+ bcopy(&iwpmksa->pmkid[0], &pmkidptr->pmkid[0].PMKID, WPA2_PMKID_LEN);
+
+ WL_WSEC(("wl_iw_set_pmksa,IW_PMKSA_REMOVE - PMKID: %s = ",
+ bcm_ether_ntoa(&pmkidptr->pmkid[0].BSSID,
+ eabuf)));
+ for (j = 0; j < WPA2_PMKID_LEN; j++)
+ WL_WSEC(("%02x ", pmkidptr->pmkid[0].PMKID[j]));
+ WL_WSEC(("\n"));
+ }
+
+ for (i = 0; i < pmkid_list.pmkids.npmkid; i++)
+ if (!bcmp(&iwpmksa->bssid.sa_data[0], &pmkid_list.pmkids.pmkid[i].BSSID,
+ ETHER_ADDR_LEN))
+ break;
+
+ if ((pmkid_list.pmkids.npmkid > 0) && (i < pmkid_list.pmkids.npmkid)) {
+ bzero(&pmkid_list.pmkids.pmkid[i], sizeof(pmkid_t));
+ for (; i < (pmkid_list.pmkids.npmkid - 1); i++) {
+ bcopy(&pmkid_list.pmkids.pmkid[i+1].BSSID,
+ &pmkid_list.pmkids.pmkid[i].BSSID,
+ ETHER_ADDR_LEN);
+ bcopy(&pmkid_list.pmkids.pmkid[i+1].PMKID,
+ &pmkid_list.pmkids.pmkid[i].PMKID,
+ WPA2_PMKID_LEN);
+ }
+ pmkid_list.pmkids.npmkid--;
+ }
+ else
+ ret = -EINVAL;
+ }
+
+ else if (iwpmksa->cmd == IW_PMKSA_ADD) {
+ for (i = 0; i < pmkid_list.pmkids.npmkid; i++)
+ if (!bcmp(&iwpmksa->bssid.sa_data[0], &pmkid_list.pmkids.pmkid[i].BSSID,
+ ETHER_ADDR_LEN))
+ break;
+ if (i < MAXPMKID) {
+ bcopy(&iwpmksa->bssid.sa_data[0],
+ &pmkid_list.pmkids.pmkid[i].BSSID,
+ ETHER_ADDR_LEN);
+ bcopy(&iwpmksa->pmkid[0], &pmkid_list.pmkids.pmkid[i].PMKID,
+ WPA2_PMKID_LEN);
+ if (i == pmkid_list.pmkids.npmkid)
+ pmkid_list.pmkids.npmkid++;
+ }
+ else
+ ret = -EINVAL;
+
+ {
+ uint j;
+ uint k;
+ k = pmkid_list.pmkids.npmkid;
+ WL_WSEC(("wl_iw_set_pmksa,IW_PMKSA_ADD - PMKID: %s = ",
+ bcm_ether_ntoa(&pmkid_list.pmkids.pmkid[k].BSSID,
+ eabuf)));
+ for (j = 0; j < WPA2_PMKID_LEN; j++)
+ WL_WSEC(("%02x ", pmkid_list.pmkids.pmkid[k].PMKID[j]));
+ WL_WSEC(("\n"));
+ }
+ }
+ WL_WSEC(("PRINTING pmkid LIST - No of elements %d, ret = %d\n", pmkid_list.pmkids.npmkid, ret));
+ for (i = 0; i < pmkid_list.pmkids.npmkid; i++) {
+ uint j;
+ WL_WSEC(("PMKID[%d]: %s = ", i,
+ bcm_ether_ntoa(&pmkid_list.pmkids.pmkid[i].BSSID,
+ eabuf)));
+ for (j = 0; j < WPA2_PMKID_LEN; j++)
+ WL_WSEC(("%02x ", pmkid_list.pmkids.pmkid[i].PMKID[j]));
+ WL_WSEC(("\n"));
+ }
+ WL_WSEC(("\n"));
+
+ if (!ret)
+ ret = dev_wlc_bufvar_set(dev, "pmkid_info", (char *)&pmkid_list, sizeof(pmkid_list));
+ return ret;
+}
+#endif
+#endif
+
+static int
+wl_iw_get_encodeext(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ WL_WSEC(("%s: SIOCGIWENCODEEXT\n", dev->name));
+ return 0;
+}
+
+static int
+wl_iw_set_wpaauth(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error = 0;
+ int paramid;
+ int paramval;
+ int val = 0;
+ wl_iw_t *iw = *(wl_iw_t **)netdev_priv(dev);
+
+ WL_WSEC(("%s: SIOCSIWAUTH\n", dev->name));
+
+#if defined(SOFTAP)
+ if (ap_cfg_running) {
+ WL_TRACE(("%s: Not executed, reason -'SOFTAP is active'\n", __FUNCTION__));
+ return 0;
+ }
+#endif
+
+ paramid = vwrq->flags & IW_AUTH_INDEX;
+ paramval = vwrq->value;
+
+ WL_WSEC(("%s: SIOCSIWAUTH, paramid = 0x%0x, paramval = 0x%0x\n",
+ dev->name, paramid, paramval));
+
+ switch (paramid) {
+ case IW_AUTH_WPA_VERSION:
+
+ if (paramval & IW_AUTH_WPA_VERSION_DISABLED)
+ val = WPA_AUTH_DISABLED;
+ else if (paramval & (IW_AUTH_WPA_VERSION_WPA))
+ val = WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED;
+#ifdef BCMWPA2
+ else if (paramval & IW_AUTH_WPA_VERSION_WPA2)
+ val = WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED;
+#endif
+ else if (paramval & IW_AUTH_WAPI_VERSION_1)
+ val = WPA_AUTH_WAPI;
+ WL_WSEC(("%s: %d: setting wpa_auth to 0x%0x\n", __FUNCTION__, __LINE__, val));
+ if ((error = dev_wlc_intvar_set(dev, "wpa_auth", val)))
+ return error;
+ break;
+ case IW_AUTH_CIPHER_PAIRWISE:
+ case IW_AUTH_CIPHER_GROUP:
+
+
+ if (paramval & (IW_AUTH_CIPHER_WEP40 | IW_AUTH_CIPHER_WEP104))
+ val = WEP_ENABLED;
+ if (paramval & IW_AUTH_CIPHER_TKIP)
+ val = TKIP_ENABLED;
+ if (paramval & IW_AUTH_CIPHER_CCMP)
+ val = AES_ENABLED;
+ if (paramval & IW_AUTH_CIPHER_SMS4)
+ val = SMS4_ENABLED;
+
+ if (paramid == IW_AUTH_CIPHER_PAIRWISE) {
+ iw->pwsec = val;
+ val |= iw->gwsec;
+ }
+ else {
+ iw->gwsec = val;
+ val |= iw->pwsec;
+ }
+
+ if (iw->privacy_invoked && !val) {
+ WL_WSEC(("%s: %s: 'Privacy invoked' TRUE but clearing wsec, assuming "
+ "we're a WPS enrollee\n", dev->name, __FUNCTION__));
+ if ((error = dev_wlc_intvar_set(dev, "is_WPS_enrollee", TRUE))) {
+ WL_ERROR(("Failed to set iovar is_WPS_enrollee\n"));
+ return error;
+ }
+ } else if (val) {
+ if ((error = dev_wlc_intvar_set(dev, "is_WPS_enrollee", FALSE))) {
+ WL_ERROR(("Failed to clear iovar is_WPS_enrollee\n"));
+ return error;
+ }
+ }
+
+ if ((error = dev_wlc_intvar_set(dev, "wsec", val))) {
+ WL_ERROR(("Failed to set 'wsec'iovar\n"));
+ return error;
+ }
+
+ break;
+
+ case IW_AUTH_KEY_MGMT:
+ if ((error = dev_wlc_intvar_get(dev, "wpa_auth", &val))) {
+ WL_ERROR(("Failed to get 'wpa_auth'iovar\n"));
+ return error;
+ }
+
+ if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED)) {
+ if (paramval & IW_AUTH_KEY_MGMT_PSK)
+ val = WPA_AUTH_PSK;
+ else
+ val = WPA_AUTH_UNSPECIFIED;
+ }
+#ifdef BCMWPA2
+ else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED)) {
+ if (paramval & IW_AUTH_KEY_MGMT_PSK)
+ val = WPA2_AUTH_PSK;
+ else
+ val = WPA2_AUTH_UNSPECIFIED;
+ }
+#endif
+ if (paramval & (IW_AUTH_KEY_MGMT_WAPI_PSK | IW_AUTH_KEY_MGMT_WAPI_CERT))
+ val = WPA_AUTH_WAPI;
+ WL_WSEC(("%s: %d: setting wpa_auth to %d\n", __FUNCTION__, __LINE__, val));
+ if ((error = dev_wlc_intvar_set(dev, "wpa_auth", val))) {
+ WL_ERROR(("Failed to set 'wpa_auth'iovar\n"));
+ return error;
+ }
+
+ break;
+ case IW_AUTH_TKIP_COUNTERMEASURES:
+ if ((error = dev_wlc_bufvar_set(dev, "tkip_countermeasures", \
+ (char *)¶mval, sizeof(paramval))))
+ WL_WSEC(("%s: tkip_countermeasures failed %d\n", __FUNCTION__, error));
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG:
+
+ WL_WSEC(("Setting the D11auth %d\n", paramval));
+ if (paramval == IW_AUTH_ALG_OPEN_SYSTEM)
+ val = 0;
+ else if (paramval == IW_AUTH_ALG_SHARED_KEY)
+ val = 1;
+ else if (paramval == (IW_AUTH_ALG_OPEN_SYSTEM | IW_AUTH_ALG_SHARED_KEY))
+ val = 2;
+ else
+ error = 1;
+ if (!error && (error = dev_wlc_intvar_set(dev, "auth", val)))
+ return error;
+ break;
+
+ case IW_AUTH_WPA_ENABLED:
+ if (paramval == 0) {
+ iw->pwsec = 0;
+ iw->gwsec = 0;
+ if ((error = dev_wlc_intvar_get(dev, "wsec", &val))) {
+ WL_ERROR(("Failed to get 'wsec'iovar\n"));
+ return error;
+ }
+ if (val & (TKIP_ENABLED | AES_ENABLED)) {
+ val &= ~(TKIP_ENABLED | AES_ENABLED);
+ dev_wlc_intvar_set(dev, "wsec", val);
+ }
+ val = 0;
+
+ WL_INFORM(("%s: %d: setting wpa_auth to %d\n",
+ __FUNCTION__, __LINE__, val));
+ error = dev_wlc_intvar_set(dev, "wpa_auth", 0);
+ if (error)
+ WL_ERROR(("Failed to set 'wpa_auth'iovar\n"));
+ return error;
+ }
+
+
+ break;
+
+ case IW_AUTH_DROP_UNENCRYPTED:
+ error = dev_wlc_bufvar_set(dev, "wsec_restrict", \
+ (char *)¶mval, sizeof(paramval));
+ if (error)
+ WL_ERROR(("%s: wsec_restrict %d\n", __FUNCTION__, error));
+ break;
+
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ error = dev_wlc_bufvar_set(dev, "rx_unencrypted_eapol", \
+ (char *)¶mval, sizeof(paramval));
+ if (error)
+ WL_WSEC(("%s: rx_unencrypted_eapol %d\n", __FUNCTION__, error));
+ break;
+
+#if WIRELESS_EXT > 17
+ case IW_AUTH_ROAMING_CONTROL:
+ WL_INFORM(("%s: IW_AUTH_ROAMING_CONTROL\n", __FUNCTION__));
+
+ break;
+ case IW_AUTH_PRIVACY_INVOKED: {
+ int wsec;
+
+ if (paramval == 0) {
+ iw->privacy_invoked = FALSE;
+ if ((error = dev_wlc_intvar_set(dev, "is_WPS_enrollee", FALSE))) {
+ WL_WSEC(("Failed to clear iovar is_WPS_enrollee\n"));
+ return error;
+ }
+ } else {
+ iw->privacy_invoked = TRUE;
+ if ((error = dev_wlc_intvar_get(dev, "wsec", &wsec)))
+ return error;
+
+ if (!(IW_WSEC_ENABLED(wsec))) {
+
+ if ((error = dev_wlc_intvar_set(dev, "is_WPS_enrollee", TRUE))) {
+ WL_WSEC(("Failed to set iovar is_WPS_enrollee\n"));
+ return error;
+ }
+ } else {
+ if ((error = dev_wlc_intvar_set(dev, "is_WPS_enrollee", FALSE))) {
+ WL_WSEC(("Failed to clear iovar is_WPS_enrollee\n"));
+ return error;
+ }
+ }
+ }
+ break;
+ }
+#endif
+ case IW_AUTH_WAPI_ENABLED:
+ if ((error = dev_wlc_intvar_get(dev, "wsec", &val)))
+ return error;
+ if (paramval) {
+ val |= SMS4_ENABLED;
+ if ((error = dev_wlc_intvar_set(dev, "wsec", val))) {
+ WL_ERROR(("%s: setting wsec to 0x%0x returned error %d\n",
+ __FUNCTION__, val, error));
+ return error;
+ }
+ if ((error = dev_wlc_intvar_set(dev, "wpa_auth", WPA_AUTH_WAPI))) {
+ WL_ERROR(("%s: setting wpa_auth(WPA_AUTH_WAPI) returned %d\n",
+ __FUNCTION__, error));
+ return error;
+ }
+ }
+
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+#ifdef BCMWPA2
+#define VAL_PSK(_val) (((_val) & WPA_AUTH_PSK) || ((_val) & WPA2_AUTH_PSK))
+#else
+#define VAL_PSK(_val) (((_val) & WPA_AUTH_PSK))
+#endif
+
+static int
+wl_iw_get_wpaauth(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra
+)
+{
+ int error;
+ int paramid;
+ int paramval = 0;
+ int val;
+ wl_iw_t *iw = *(wl_iw_t **)netdev_priv(dev);
+
+ WL_TRACE(("%s: SIOCGIWAUTH\n", dev->name));
+
+ paramid = vwrq->flags & IW_AUTH_INDEX;
+
+ switch (paramid) {
+ case IW_AUTH_WPA_VERSION:
+
+ if ((error = dev_wlc_intvar_get(dev, "wpa_auth", &val)))
+ return error;
+ if (val & (WPA_AUTH_NONE | WPA_AUTH_DISABLED))
+ paramval = IW_AUTH_WPA_VERSION_DISABLED;
+ else if (val & (WPA_AUTH_PSK | WPA_AUTH_UNSPECIFIED))
+ paramval = IW_AUTH_WPA_VERSION_WPA;
+#ifdef BCMWPA2
+ else if (val & (WPA2_AUTH_PSK | WPA2_AUTH_UNSPECIFIED))
+ paramval = IW_AUTH_WPA_VERSION_WPA2;
+#endif
+ break;
+ case IW_AUTH_CIPHER_PAIRWISE:
+ case IW_AUTH_CIPHER_GROUP:
+ if (paramid == IW_AUTH_CIPHER_PAIRWISE)
+ val = iw->pwsec;
+ else
+ val = iw->gwsec;
+
+ paramval = 0;
+ if (val) {
+ if (val & WEP_ENABLED)
+ paramval |= (IW_AUTH_CIPHER_WEP40 | IW_AUTH_CIPHER_WEP104);
+ if (val & TKIP_ENABLED)
+ paramval |= (IW_AUTH_CIPHER_TKIP);
+ if (val & AES_ENABLED)
+ paramval |= (IW_AUTH_CIPHER_CCMP);
+ }
+ else
+ paramval = IW_AUTH_CIPHER_NONE;
+ break;
+ case IW_AUTH_KEY_MGMT:
+
+ if ((error = dev_wlc_intvar_get(dev, "wpa_auth", &val)))
+ return error;
+ if (VAL_PSK(val))
+ paramval = IW_AUTH_KEY_MGMT_PSK;
+ else
+ paramval = IW_AUTH_KEY_MGMT_802_1X;
+
+ break;
+ case IW_AUTH_TKIP_COUNTERMEASURES:
+ error = dev_wlc_bufvar_get(dev, "tkip_countermeasures", \
+ (char *)¶mval, sizeof(paramval));
+ if (error)
+ WL_ERROR(("%s get tkip_countermeasures %d\n", __FUNCTION__, error));
+ break;
+
+ case IW_AUTH_DROP_UNENCRYPTED:
+ error = dev_wlc_bufvar_get(dev, "wsec_restrict", \
+ (char *)¶mval, sizeof(paramval));
+ if (error)
+ WL_ERROR(("%s get wsec_restrict %d\n", __FUNCTION__, error));
+ break;
+
+ case IW_AUTH_RX_UNENCRYPTED_EAPOL:
+ error = dev_wlc_bufvar_get(dev, "rx_unencrypted_eapol", \
+ (char *)¶mval, sizeof(paramval));
+ if (error)
+ WL_ERROR(("%s get rx_unencrypted_eapol %d\n", __FUNCTION__, error));
+ break;
+
+ case IW_AUTH_80211_AUTH_ALG:
+
+ if ((error = dev_wlc_intvar_get(dev, "auth", &val)))
+ return error;
+ if (!val)
+ paramval = IW_AUTH_ALG_OPEN_SYSTEM;
+ else
+ paramval = IW_AUTH_ALG_SHARED_KEY;
+ break;
+ case IW_AUTH_WPA_ENABLED:
+ if ((error = dev_wlc_intvar_get(dev, "wpa_auth", &val)))
+ return error;
+ if (val)
+ paramval = TRUE;
+ else
+ paramval = FALSE;
+ break;
+#if WIRELESS_EXT > 17
+ case IW_AUTH_ROAMING_CONTROL:
+ WL_ERROR(("%s: IW_AUTH_ROAMING_CONTROL\n", __FUNCTION__));
+
+ break;
+ case IW_AUTH_PRIVACY_INVOKED:
+ paramval = iw->privacy_invoked;
+ break;
+#endif
+ }
+ vwrq->value = paramval;
+ return 0;
+}
+#endif
+
+
+#ifdef SOFTAP
+
+static int ap_macmode = MACLIST_MODE_DISABLED;
+static struct mflist ap_black_list;
+static int
+wl_iw_parse_wep(char *keystr, wl_wsec_key_t *key)
+{
+ char hex[] = "XX";
+ unsigned char *data = key->data;
+
+ switch (strlen(keystr)) {
+ case 5:
+ case 13:
+ case 16:
+ key->len = strlen(keystr);
+ memcpy(data, keystr, key->len + 1);
+ break;
+ case 12:
+ case 28:
+ case 34:
+ case 66:
+ if (!strnicmp(keystr, "0x", 2))
+ keystr += 2;
+ else
+ return -1;
+ case 10:
+ case 26:
+ case 32:
+ case 64:
+ key->len = strlen(keystr) / 2;
+ while (*keystr) {
+ strncpy(hex, keystr, 2);
+ *data++ = (char) bcm_strtoul(hex, NULL, 16);
+ keystr += 2;
+ }
+ break;
+ default:
+ return -1;
+ }
+
+ switch (key->len) {
+ case 5:
+ key->algo = CRYPTO_ALGO_WEP1;
+ break;
+ case 13:
+ key->algo = CRYPTO_ALGO_WEP128;
+ break;
+ case 16:
+ key->algo = CRYPTO_ALGO_AES_CCM;
+ break;
+ case 32:
+ key->algo = CRYPTO_ALGO_TKIP;
+ break;
+ default:
+ return -1;
+ }
+
+ key->flags |= WL_PRIMARY_KEY;
+
+ return 0;
+}
+
+#ifdef EXT_WPA_CRYPTO
+#define SHA1HashSize 20
+extern void pbkdf2_sha1(const char *passphrase, const char *ssid, size_t ssid_len,
+ int iterations, u8 *buf, size_t buflen);
+
+#else
+
+#define SHA1HashSize 20
+int pbkdf2_sha1(const char *passphrase, const char *ssid, size_t ssid_len,
+ int iterations, u8 *buf, size_t buflen)
+{
+ WL_ERROR(("WARNING: %s is not implemented !!!\n", __FUNCTION__));
+ return -1;
+}
+
+#endif
+
+
+int dev_iw_write_cfg1_bss_var(struct net_device *dev, int val)
+{
+ struct {
+ int cfg;
+ int val;
+ } bss_setbuf;
+
+ int bss_set_res;
+ char smbuf[WLC_IOCTL_SMLEN];
+ memset(smbuf, 0, sizeof(smbuf));
+
+ bss_setbuf.cfg = 1;
+ bss_setbuf.val = val;
+
+ bss_set_res = dev_iw_iovar_setbuf(dev, "bss",
+ &bss_setbuf, sizeof(bss_setbuf), smbuf, sizeof(smbuf));
+ WL_TRACE(("%s: bss_set_result:%d set with %d\n", __FUNCTION__, bss_set_res, val));
+
+ return bss_set_res;
+}
+
+
+int dev_iw_read_cfg1_bss_var(struct net_device *dev, int *val)
+{
+ int bsscfg_idx = 1;
+ int bss_set_res;
+ char smbuf[WLC_IOCTL_SMLEN];
+ memset(smbuf, 0, sizeof(smbuf));
+
+ bss_set_res = dev_iw_iovar_getbuf(dev, "bss", \
+ &bsscfg_idx, sizeof(bsscfg_idx), smbuf, sizeof(smbuf));
+ *val = *(int*)smbuf;
+ *val = dtoh32(*val);
+ WL_TRACE(("%s: status=%d bss_get_result=%d\n", __FUNCTION__, bss_set_res, *val));
+ return bss_set_res;
+}
+
+
+#ifndef AP_ONLY
+static int wl_bssiovar_mkbuf(
+ const char *iovar,
+ int bssidx,
+ void *param,
+ int paramlen,
+ void *bufptr,
+ int buflen,
+ int *perr)
+{
+ const char *prefix = "bsscfg:";
+ int8 *p;
+ uint prefixlen;
+ uint namelen;
+ uint iolen;
+
+ prefixlen = strlen(prefix);
+ namelen = strlen(iovar) + 1;
+ iolen = prefixlen + namelen + sizeof(int) + paramlen;
+
+ if (buflen < 0 || iolen > (uint)buflen) {
+ *perr = BCME_BUFTOOSHORT;
+ return 0;
+ }
+
+ p = (int8 *)bufptr;
+
+ memcpy(p, prefix, prefixlen);
+ p += prefixlen;
+
+ memcpy(p, iovar, namelen);
+ p += namelen;
+
+ bssidx = htod32(bssidx);
+ memcpy(p, &bssidx, sizeof(int32));
+ p += sizeof(int32);
+
+ if (paramlen)
+ memcpy(p, param, paramlen);
+
+ *perr = 0;
+ return iolen;
+}
+#endif
+
+
+int get_user_params(char *user_params, struct iw_point *dwrq)
+{
+ int ret = 0;
+
+ if (copy_from_user(user_params, dwrq->pointer, dwrq->length)) {
+ WL_ERROR(("\n%s: no user params: uptr:%p, ulen:%d\n",
+ __FUNCTION__, dwrq->pointer, dwrq->length));
+ return -EFAULT;
+ }
+
+ WL_TRACE(("\n%s: iwpriv user params:%s\n", __FUNCTION__, user_params));
+
+ return ret;
+}
+
+
+#define strtoul(nptr, endptr, base) bcm_strtoul((nptr), (endptr), (base))
+
+#if defined(CSCAN)
+
+static int
+wl_iw_combined_scan_set(struct net_device *dev, wlc_ssid_t* ssids_local, int nssid, int nchan)
+{
+ int params_size = WL_SCAN_PARAMS_FIXED_SIZE + WL_NUMCHANNELS * sizeof(uint16);
+ int err = 0;
+ char *p;
+ int i;
+ iscan_info_t *iscan = g_iscan;
+
+ WL_SCAN(("%s nssid=%d nchan=%d\n", __FUNCTION__, nssid, nchan));
+
+ if ((!dev) && (!g_iscan) && (!iscan->iscan_ex_params_p)) {
+ WL_ERROR(("%s error exit\n", __FUNCTION__));
+ err = -1;
+ goto exit;
+ }
+
+#ifdef PNO_SUPPORT
+ if (dhd_dev_get_pno_status(dev)) {
+ WL_ERROR(("%s: Scan called when PNO is active\n", __FUNCTION__));
+ }
+#endif
+
+ params_size += WL_SCAN_PARAMS_SSID_MAX * sizeof(wlc_ssid_t);
+
+ if (nssid > 0) {
+ i = OFFSETOF(wl_scan_params_t, channel_list) + nchan * sizeof(uint16);
+ i = ROUNDUP(i, sizeof(uint32));
+ if (i + nssid * sizeof(wlc_ssid_t) > params_size) {
+ printf("additional ssids exceed params_size\n");
+ err = -1;
+ goto exit;
+ }
+
+ p = ((char*)&iscan->iscan_ex_params_p->params) + i;
+ memcpy(p, ssids_local, nssid * sizeof(wlc_ssid_t));
+ p += nssid * sizeof(wlc_ssid_t);
+ } else {
+ p = (char*)iscan->iscan_ex_params_p->params.channel_list + nchan * sizeof(uint16);
+ }
+
+ iscan->iscan_ex_params_p->params.channel_num = \
+ htod32((nssid << WL_SCAN_PARAMS_NSSID_SHIFT) | \
+ (nchan & WL_SCAN_PARAMS_COUNT_MASK));
+
+ nssid = \
+ (uint)((iscan->iscan_ex_params_p->params.channel_num >> WL_SCAN_PARAMS_NSSID_SHIFT) & \
+ WL_SCAN_PARAMS_COUNT_MASK);
+
+ params_size = (int) (p - (char*)iscan->iscan_ex_params_p + nssid * sizeof(wlc_ssid_t));
+ iscan->iscan_ex_param_size = params_size;
+
+ iscan->list_cur = iscan->list_hdr;
+ iscan->iscan_state = ISCAN_STATE_SCANING;
+ wl_iw_set_event_mask(dev);
+ mod_timer(&iscan->timer, jiffies + iscan->timer_ms*HZ/1000);
+
+ iscan->timer_on = 1;
+
+#ifdef SCAN_DUMP
+ {
+ int i;
+ WL_SCAN(("\n### List of SSIDs to scan ###\n"));
+ for (i = 0; i < nssid; i++) {
+ if (!ssids_local[i].SSID_len)
+ WL_SCAN(("%d: Broadcast scan\n", i));
+ else
+ WL_SCAN(("%d: scan for %s size =%d\n", i, \
+ ssids_local[i].SSID, ssids_local[i].SSID_len));
+ }
+ WL_SCAN(("### List of channels to scan ###\n"));
+ for (i = 0; i < nchan; i++)
+ {
+ WL_SCAN(("%d ", iscan->iscan_ex_params_p->params.channel_list[i]));
+ }
+ WL_SCAN(("\nnprobes=%d\n", iscan->iscan_ex_params_p->params.nprobes));
+ WL_SCAN(("active_time=%d\n", iscan->iscan_ex_params_p->params.active_time));
+ WL_SCAN(("passive_time=%d\n", iscan->iscan_ex_params_p->params.passive_time));
+ WL_SCAN(("home_time=%d\n", iscan->iscan_ex_params_p->params.home_time));
+ WL_SCAN(("scan_type=%d\n", iscan->iscan_ex_params_p->params.scan_type));
+ WL_SCAN(("\n###################\n"));
+ }
+#endif
+
+ if (params_size > WLC_IOCTL_MEDLEN) {
+ WL_ERROR(("Set ISCAN for %s due to params_size=%d \n", \
+ __FUNCTION__, params_size));
+ err = -1;
+ }
+
+ if ((err = dev_iw_iovar_setbuf(dev, "iscan", iscan->iscan_ex_params_p, \
+ iscan->iscan_ex_param_size, \
+ iscan->ioctlbuf, sizeof(iscan->ioctlbuf)))) {
+ WL_ERROR(("Set ISCAN for %s failed with %d\n", __FUNCTION__, err));
+ err = -1;
+ }
+
+exit:
+
+ return err;
+}
+
+
+static int iwpriv_set_cscan(struct net_device *dev, struct iw_request_info *info, \
+ union iwreq_data *wrqu, char *ext)
+{
+ int res = 0;
+ char *extra = NULL;
+ iscan_info_t *iscan = g_iscan;
+ wlc_ssid_t ssids_local[WL_SCAN_PARAMS_SSID_MAX];
+ int nssid = 0;
+ int nchan = 0;
+
+ WL_TRACE(("\%s: info->cmd:%x, info->flags:%x, u.data=0x%p, u.len=%d\n",
+ __FUNCTION__, info->cmd, info->flags,
+ wrqu->data.pointer, wrqu->data.length));
+
+ if (g_onoff == G_WLAN_SET_OFF) {
+ WL_TRACE(("%s: driver is not up yet after START\n", __FUNCTION__));
+ return -1;
+ }
+
+ if (wrqu->data.length != 0) {
+
+ char *str_ptr;
+
+ if (!iscan->iscan_ex_params_p) {
+ return -EFAULT;
+ }
+
+ if (!(extra = kmalloc(wrqu->data.length+1, GFP_KERNEL)))
+ return -ENOMEM;
+
+ if (copy_from_user(extra, wrqu->data.pointer, wrqu->data.length)) {
+ kfree(extra);
+ return -EFAULT;
+ }
+
+ extra[wrqu->data.length] = 0;
+ WL_ERROR(("Got str param in iw_point:\n %s\n", extra));
+
+ str_ptr = extra;
+
+ if (strncmp(str_ptr, GET_SSID, strlen(GET_SSID))) {
+ WL_ERROR(("%s Error: extracting SSID='' string\n", __FUNCTION__));
+ goto exit_proc;
+ }
+ str_ptr += strlen(GET_SSID);
+ nssid = wl_iw_parse_ssid_list(&str_ptr, ssids_local, nssid, \
+ WL_SCAN_PARAMS_SSID_MAX);
+ if (nssid == -1) {
+ WL_ERROR(("%s wrong ssid list", __FUNCTION__));
+ return -1;
+ }
+
+ if (iscan->iscan_ex_param_size > WLC_IOCTL_MAXLEN) {
+ WL_ERROR(("%s wrong ex_param_size %d", \
+ __FUNCTION__, iscan->iscan_ex_param_size));
+ return -1;
+ }
+ memset(iscan->iscan_ex_params_p, 0, iscan->iscan_ex_param_size);
+
+
+ wl_iw_iscan_prep(&iscan->iscan_ex_params_p->params, NULL);
+ iscan->iscan_ex_params_p->version = htod32(ISCAN_REQ_VERSION);
+ iscan->iscan_ex_params_p->action = htod16(WL_SCAN_ACTION_START);
+ iscan->iscan_ex_params_p->scan_duration = htod16(0);
+
+
+ if ((nchan = wl_iw_parse_channel_list(&str_ptr, \
+ &iscan->iscan_ex_params_p->params.channel_list[0], \
+ WL_NUMCHANNELS)) == -1) {
+ WL_ERROR(("%s missing channel list\n", __FUNCTION__));
+ return -1;
+ }
+
+
+ get_parmeter_from_string(&str_ptr, \
+ GET_NPROBE, PTYPE_INTDEC, \
+ &iscan->iscan_ex_params_p->params.nprobes, 2);
+
+ get_parmeter_from_string(&str_ptr, GET_ACTIVE_ASSOC_DWELL, PTYPE_INTDEC, \
+ &iscan->iscan_ex_params_p->params.active_time, 4);
+
+ get_parmeter_from_string(&str_ptr, GET_PASSIVE_ASSOC_DWELL, PTYPE_INTDEC, \
+ &iscan->iscan_ex_params_p->params.passive_time, 4);
+
+ get_parmeter_from_string(&str_ptr, GET_HOME_DWELL, PTYPE_INTDEC, \
+ &iscan->iscan_ex_params_p->params.home_time, 4);
+
+ get_parmeter_from_string(&str_ptr, GET_SCAN_TYPE, PTYPE_INTDEC, \
+ &iscan->iscan_ex_params_p->params.scan_type, 1);
+
+ res = wl_iw_combined_scan_set(dev, ssids_local, nssid, nchan);
+
+ } else {
+ WL_ERROR(("IWPRIV argument len = 0 \n"));
+ return -1;
+ }
+
+exit_proc:
+
+ kfree(extra);
+
+ return res;
+}
+
+
+static int
+wl_iw_set_cscan(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra
+)
+{
+ int res = -1;
+ iscan_info_t *iscan = g_iscan;
+ wlc_ssid_t ssids_local[WL_SCAN_PARAMS_SSID_MAX];
+ int nssid = 0;
+ int nchan = 0;
+ cscan_tlv_t *cscan_tlv_temp;
+ char type;
+ char *str_ptr;
+ int tlv_size_left;
+#ifdef TLV_DEBUG
+ int i;
+ char tlv_in_example[] = { 'C', 'S', 'C', 'A', 'N', ' ', \
+ 0x53, 0x01, 0x00, 0x00,
+ 'S',
+ 0x00,
+ 'S',
+ 0x04,
+ 'B', 'R', 'C', 'M',
+ 'C',
+ 0x06,
+ 'P',
+ 0x94,
+ 0x11,
+ 'T',
+ 0x01
+ };
+#endif
+
+ WL_TRACE(("\n### %s: info->cmd:%x, info->flags:%x, u.data=0x%p, u.len=%d\n",
+ __FUNCTION__, info->cmd, info->flags,
+ wrqu->data.pointer, wrqu->data.length));
+
+ net_os_wake_lock(dev);
+
+ if (g_onoff == G_WLAN_SET_OFF) {
+ WL_TRACE(("%s: driver is not up yet after START\n", __FUNCTION__));
+ goto exit_proc;
+ }
+
+
+ if (wrqu->data.length < (strlen(CSCAN_COMMAND) + sizeof(cscan_tlv_t))) {
+ WL_ERROR(("%s aggument=%d less %d\n", __FUNCTION__, \
+ wrqu->data.length, strlen(CSCAN_COMMAND) + sizeof(cscan_tlv_t)));
+ goto exit_proc;
+ }
+
+#ifdef TLV_DEBUG
+ memcpy(extra, tlv_in_example, sizeof(tlv_in_example));
+ wrqu->data.length = sizeof(tlv_in_example);
+ for (i = 0; i < wrqu->data.length; i++)
+ printf("%02X ", extra[i]);
+ printf("\n");
+#endif
+
+ str_ptr = extra;
+ str_ptr += strlen(CSCAN_COMMAND);
+ tlv_size_left = wrqu->data.length - strlen(CSCAN_COMMAND);
+
+ cscan_tlv_temp = (cscan_tlv_t *)str_ptr;
+ memset(ssids_local, 0, sizeof(ssids_local));
+
+ if ((cscan_tlv_temp->prefix == CSCAN_TLV_PREFIX) && \
+ (cscan_tlv_temp->version == CSCAN_TLV_VERSION) && \
+ (cscan_tlv_temp->subver == CSCAN_TLV_SUBVERSION))
+ {
+ str_ptr += sizeof(cscan_tlv_t);
+ tlv_size_left -= sizeof(cscan_tlv_t);
+
+
+ if ((nssid = wl_iw_parse_ssid_list_tlv(&str_ptr, ssids_local, \
+ WL_SCAN_PARAMS_SSID_MAX, &tlv_size_left)) <= 0) {
+ WL_ERROR(("SSID is not presented or corrupted ret=%d\n", nssid));
+ goto exit_proc;
+ }
+ else {
+
+ memset(iscan->iscan_ex_params_p, 0, iscan->iscan_ex_param_size);
+
+
+ wl_iw_iscan_prep(&iscan->iscan_ex_params_p->params, NULL);
+ iscan->iscan_ex_params_p->version = htod32(ISCAN_REQ_VERSION);
+ iscan->iscan_ex_params_p->action = htod16(WL_SCAN_ACTION_START);
+ iscan->iscan_ex_params_p->scan_duration = htod16(0);
+
+
+ while (tlv_size_left > 0)
+ {
+ type = str_ptr[0];
+ switch (type) {
+ case CSCAN_TLV_TYPE_CHANNEL_IE:
+
+ if ((nchan = wl_iw_parse_channel_list_tlv(&str_ptr, \
+ &iscan->iscan_ex_params_p->params.channel_list[0], \
+ WL_NUMCHANNELS, &tlv_size_left)) == -1) {
+ WL_ERROR(("%s missing channel list\n", \
+ __FUNCTION__));
+ goto exit_proc;
+ }
+ break;
+ case CSCAN_TLV_TYPE_NPROBE_IE:
+ if ((res = wl_iw_parse_data_tlv(&str_ptr, \
+ &iscan->iscan_ex_params_p->params.nprobes, \
+ sizeof(iscan->iscan_ex_params_p->params.nprobes), \
+ type, sizeof(char), &tlv_size_left)) == -1) {
+ WL_ERROR(("%s return %d\n", \
+ __FUNCTION__, res));
+ goto exit_proc;
+ }
+ break;
+ case CSCAN_TLV_TYPE_ACTIVE_IE:
+ if ((res = wl_iw_parse_data_tlv(&str_ptr, \
+ &iscan->iscan_ex_params_p->params.active_time, \
+ sizeof(iscan->iscan_ex_params_p->params.active_time), \
+ type, sizeof(short), &tlv_size_left)) == -1) {
+ WL_ERROR(("%s return %d\n", \
+ __FUNCTION__, res));
+ goto exit_proc;
+ }
+ break;
+ case CSCAN_TLV_TYPE_PASSIVE_IE:
+ if ((res = wl_iw_parse_data_tlv(&str_ptr, \
+ &iscan->iscan_ex_params_p->params.passive_time, \
+ sizeof(iscan->iscan_ex_params_p->params.passive_time), \
+ type, sizeof(short), &tlv_size_left)) == -1) {
+ WL_ERROR(("%s return %d\n", \
+ __FUNCTION__, res));
+ goto exit_proc;
+ }
+ break;
+ case CSCAN_TLV_TYPE_HOME_IE:
+ if ((res = wl_iw_parse_data_tlv(&str_ptr, \
+ &iscan->iscan_ex_params_p->params.home_time, \
+ sizeof(iscan->iscan_ex_params_p->params.home_time), \
+ type, sizeof(short), &tlv_size_left)) == -1) {
+ WL_ERROR(("%s return %d\n", \
+ __FUNCTION__, res));
+ goto exit_proc;
+ }
+ break;
+ case CSCAN_TLV_TYPE_STYPE_IE:
+ if ((res = wl_iw_parse_data_tlv(&str_ptr, \
+ &iscan->iscan_ex_params_p->params.scan_type, \
+ sizeof(iscan->iscan_ex_params_p->params.scan_type), \
+ type, sizeof(char), &tlv_size_left)) == -1) {
+ WL_ERROR(("%s return %d\n", \
+ __FUNCTION__, res));
+ goto exit_proc;
+ }
+ break;
+
+ default :
+ WL_ERROR(("%s get unkwown type %X\n", \
+ __FUNCTION__, type));
+ goto exit_proc;
+ break;
+ }
+ }
+ }
+ }
+ else {
+ WL_ERROR(("%s get wrong TLV command\n", __FUNCTION__));
+ goto exit_proc;
+ }
+
+#if defined(CONFIG_FIRST_SCAN)
+ if (g_first_broadcast_scan < BROADCAST_SCAN_FIRST_RESULT_CONSUMED) {
+ if (++g_first_counter_scans == MAX_ALLOWED_BLOCK_SCAN_FROM_FIRST_SCAN) {
+
+ WL_ERROR(("%s Clean up First scan flag which is %d\n", \
+ __FUNCTION__, g_first_broadcast_scan));
+ g_first_broadcast_scan = BROADCAST_SCAN_FIRST_RESULT_CONSUMED;
+ }
+ else {
+ WL_ERROR(("%s Ignoring CSCAN : First Scan is not done yet %d\n", \
+ __FUNCTION__, g_first_counter_scans));
+ res = -EBUSY;
+ goto exit_proc;
+ }
+ }
+#endif
+
+ res = wl_iw_combined_scan_set(dev, ssids_local, nssid, nchan);
+
+exit_proc:
+ net_os_wake_unlock(dev);
+ return res;
+}
+
+#endif
+
+#ifdef SOFTAP
+#ifndef AP_ONLY
+
+static int thr_wait_for_2nd_eth_dev(void *data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ wl_iw_t *iw;
+ int ret = 0;
+ unsigned long flags;
+
+ net_os_wake_lock(dev);
+
+ DAEMONIZE("wl0_eth_wthread");
+
+ WL_TRACE(("\n>%s thread started:, PID:%x\n", __FUNCTION__, current->pid));
+ iw = *(wl_iw_t **)netdev_priv(dev);
+ if (!iw) {
+ WL_ERROR(("%s: dev is null\n", __FUNCTION__));
+ ret = -1;
+ goto fail;
+ }
+
+#ifndef BCMSDIOH_STD
+ if (down_timeout(&ap_eth_sema, msecs_to_jiffies(5000)) != 0) {
+ WL_ERROR(("\n%s: sap_eth_sema timeout \n", __FUNCTION__));
+ ret = -1;
+ goto fail;
+ }
+#endif
+
+ flags = dhd_os_spin_lock(iw->pub);
+ if (!ap_net_dev) {
+ WL_ERROR((" ap_net_dev is null !!!"));
+ ret = -1;
+ dhd_os_spin_unlock(iw->pub, flags);
+ goto fail;
+ }
+
+ WL_TRACE(("\n>%s: Thread:'softap ethdev IF:%s is detected !!!'\n\n",
+ __FUNCTION__, ap_net_dev->name));
+
+ ap_cfg_running = TRUE;
+
+ dhd_os_spin_unlock(iw->pub, flags);
+
+ bcm_mdelay(500);
+
+ wl_iw_send_priv_event(priv_dev, "AP_SET_CFG_OK");
+
+fail:
+ WL_TRACE(("\n>%s, thread completed\n", __FUNCTION__));
+
+ net_os_wake_unlock(dev);
+
+ complete_and_exit(&ap_cfg_exited, 0);
+ return ret;
+}
+#endif
+#ifndef AP_ONLY
+static int last_auto_channel = 6;
+#endif
+static int get_softap_auto_channel(struct net_device *dev, struct ap_profile *ap)
+{
+ int chosen = 0;
+ wl_uint32_list_t request;
+ int rescan = 0;
+ int retry = 0;
+ int updown = 0;
+ int ret = 0;
+ wlc_ssid_t null_ssid;
+ int res = 0;
+#ifndef AP_ONLY
+ int iolen = 0;
+ int mkvar_err = 0;
+ int bsscfg_index = 1;
+ char buf[WLC_IOCTL_SMLEN];
+#endif
+ WL_SOFTAP(("Enter %s\n", __FUNCTION__));
+
+#ifndef AP_ONLY
+ if (ap_cfg_running) {
+ ap->channel = last_auto_channel;
+ return res;
+ }
+#endif
+ memset(&null_ssid, 0, sizeof(wlc_ssid_t));
+ res |= dev_wlc_ioctl(dev, WLC_UP, &updown, sizeof(updown));
+#ifdef AP_ONLY
+ res |= dev_wlc_ioctl(dev, WLC_SET_SSID, &null_ssid, sizeof(null_ssid));
+#else
+ iolen = wl_bssiovar_mkbuf("ssid", bsscfg_index, (char *)(&null_ssid), \
+ null_ssid.SSID_len+4, buf, sizeof(buf), &mkvar_err);
+ ASSERT(iolen);
+ res |= dev_wlc_ioctl(dev, WLC_SET_VAR, buf, iolen);
+#endif
+ auto_channel_retry:
+ request.count = htod32(0);
+ ret = dev_wlc_ioctl(dev, WLC_START_CHANNEL_SEL, &request, sizeof(request));
+ if (ret < 0) {
+ WL_ERROR(("can't start auto channel scan\n"));
+ goto fail;
+ }
+
+ get_channel_retry:
+ bcm_mdelay(500);
+
+ ret = dev_wlc_ioctl(dev, WLC_GET_CHANNEL_SEL, &chosen, sizeof(chosen));
+ if (ret < 0 || dtoh32(chosen) == 0) {
+ if (retry++ < 3)
+ goto get_channel_retry;
+ else {
+ WL_ERROR(("can't get auto channel sel, err = %d, \
+ chosen = %d\n", ret, chosen));
+ goto fail;
+ }
+ }
+ if ((chosen == 1) && (!rescan++))
+ goto auto_channel_retry;
+ WL_SOFTAP(("Set auto channel = %d\n", chosen));
+ ap->channel = chosen;
+ if ((res = dev_wlc_ioctl(dev, WLC_DOWN, &updown, sizeof(updown))) < 0) {
+ WL_ERROR(("%s fail to set up err =%d\n", __FUNCTION__, res));
+ goto fail;
+ }
+#ifndef AP_ONLY
+ if (!res)
+ last_auto_channel = ap->channel;
+#endif
+
+fail :
+ return res;
+}
+
+
+static int set_ap_cfg(struct net_device *dev, struct ap_profile *ap)
+{
+ int updown = 0;
+ int channel = 0;
+
+ wlc_ssid_t ap_ssid;
+ int max_assoc = 8;
+
+ int res = 0;
+ int apsta_var = 0;
+#ifndef AP_ONLY
+ int mpc = 0;
+ int iolen = 0;
+ int mkvar_err = 0;
+ int bsscfg_index = 1;
+ char buf[WLC_IOCTL_SMLEN];
+#endif
+
+ if (!dev) {
+ WL_ERROR(("%s: dev is null\n", __FUNCTION__));
+ return -1;
+ }
+
+ net_os_wake_lock(dev);
+
+ WL_SOFTAP(("wl_iw: set ap profile:\n"));
+ WL_SOFTAP((" ssid = '%s'\n", ap->ssid));
+ WL_SOFTAP((" security = '%s'\n", ap->sec));
+ if (ap->key[0] != '\0')
+ WL_SOFTAP((" key = '%s'\n", ap->key));
+ WL_SOFTAP((" channel = %d\n", ap->channel));
+ WL_SOFTAP((" max scb = %d\n", ap->max_scb));
+
+#ifdef AP_ONLY
+ if (ap_cfg_running) {
+ wl_iw_softap_deassoc_stations(dev, NULL);
+ ap_cfg_running = FALSE;
+ }
+#endif
+
+ if (ap_cfg_running == FALSE) {
+
+#ifndef AP_ONLY
+ sema_init(&ap_eth_sema, 0);
+
+ mpc = 0;
+ if ((res = dev_wlc_intvar_set(dev, "mpc", mpc))) {
+ WL_ERROR(("%s fail to set mpc\n", __FUNCTION__));
+ goto fail;
+ }
+#endif
+
+ updown = 0;
+ if ((res = dev_wlc_ioctl(dev, WLC_DOWN, &updown, sizeof(updown)))) {
+ WL_ERROR(("%s fail to set updown\n", __FUNCTION__));
+ goto fail;
+ }
+
+#ifdef AP_ONLY
+ apsta_var = 0;
+ if ((res = dev_wlc_ioctl(dev, WLC_SET_AP, &apsta_var, sizeof(apsta_var)))) {
+ WL_ERROR(("%s fail to set apsta_var 0\n", __FUNCTION__));
+ goto fail;
+ }
+ apsta_var = 1;
+ if ((res = dev_wlc_ioctl(dev, WLC_SET_AP, &apsta_var, sizeof(apsta_var)))) {
+ WL_ERROR(("%s fail to set apsta_var 1\n", __FUNCTION__));
+ goto fail;
+ }
+ res = dev_wlc_ioctl(dev, WLC_GET_AP, &apsta_var, sizeof(apsta_var));
+#else
+ apsta_var = 1;
+ iolen = wl_bssiovar_mkbuf("apsta",
+ bsscfg_index, &apsta_var, sizeof(apsta_var)+4,
+ buf, sizeof(buf), &mkvar_err);
+
+ if (iolen <= 0)
+ goto fail;
+
+ if ((res = dev_wlc_ioctl(dev, WLC_SET_VAR, buf, iolen)) < 0) {
+ WL_ERROR(("%s fail to set apsta \n", __FUNCTION__));
+ goto fail;
+ }
+ WL_TRACE(("\n>in %s: apsta set result: %d \n", __FUNCTION__, res));
+#endif
+
+ updown = 1;
+ if ((res = dev_wlc_ioctl(dev, WLC_UP, &updown, sizeof(updown))) < 0) {
+ WL_ERROR(("%s fail to set apsta \n", __FUNCTION__));
+ goto fail;
+ }
+
+ } else {
+
+ if (!ap_net_dev) {
+ WL_ERROR(("%s: ap_net_dev is null\n", __FUNCTION__));
+ goto fail;
+ }
+
+ res = wl_iw_softap_deassoc_stations(ap_net_dev, NULL);
+
+
+ if ((res = dev_iw_write_cfg1_bss_var(dev, 0)) < 0) {
+ WL_ERROR(("%s fail to set bss down\n", __FUNCTION__));
+ goto fail;
+ }
+ }
+
+ if (strlen(ap->country_code)) {
+ int error = 0;
+ if ((error = dev_wlc_ioctl(dev, WLC_SET_COUNTRY,
+ ap->country_code, sizeof(ap->country_code))) >= 0) {
+ WL_SOFTAP(("%s: set country %s OK\n",
+ __FUNCTION__, ap->country_code));
+ dhd_bus_country_set(dev, &ap->country_code[0]);
+ } else {
+ WL_ERROR(("%s: ERROR:%d setting country %s\n",
+ __FUNCTION__, error, ap->country_code));
+ }
+ } else {
+ WL_SOFTAP(("%s: Country code is not specified,"
+ " will use Radio's default\n",
+ __FUNCTION__));
+ }
+
+ iolen = wl_bssiovar_mkbuf("closednet",
+ bsscfg_index, &ap->closednet, sizeof(ap->closednet)+4,
+ buf, sizeof(buf), &mkvar_err);
+ ASSERT(iolen);
+ if ((res = dev_wlc_ioctl(dev, WLC_SET_VAR, buf, iolen)) < 0) {
+ WL_ERROR(("%s failed to set 'closednet'for apsta \n", __FUNCTION__));
+ goto fail;
+ }
+
+
+ if ((ap->channel == 0) && (get_softap_auto_channel(dev, ap) < 0)) {
+ ap->channel = 1;
+ WL_ERROR(("%s auto channel failed, pick up channel=%d\n", \
+ __FUNCTION__, ap->channel));
+ }
+
+ channel = ap->channel;
+ if ((res = dev_wlc_ioctl(dev, WLC_SET_CHANNEL, &channel, sizeof(channel)))) {
+ WL_ERROR(("%s fail to set channel\n", __FUNCTION__));
+ goto fail;
+ }
+
+ if (ap_cfg_running == FALSE) {
+ updown = 0;
+ if ((res = dev_wlc_ioctl(dev, WLC_UP, &updown, sizeof(updown)))) {
+ WL_ERROR(("%s fail to set up\n", __FUNCTION__));
+ goto fail;
+ }
+ }
+
+ max_assoc = ap->max_scb;
+ if ((res = dev_wlc_intvar_set(dev, "maxassoc", max_assoc))) {
+ WL_ERROR(("%s fail to set maxassoc\n", __FUNCTION__));
+ goto fail;
+ }
+
+ ap_ssid.SSID_len = strlen(ap->ssid);
+ strncpy(ap_ssid.SSID, ap->ssid, ap_ssid.SSID_len);
+
+#ifdef AP_ONLY
+ if ((res = wl_iw_set_ap_security(dev, &my_ap)) != 0) {
+ WL_ERROR(("ERROR:%d in:%s, wl_iw_set_ap_security is skipped\n", \
+ res, __FUNCTION__));
+ goto fail;
+ }
+ wl_iw_send_priv_event(dev, "ASCII_CMD=AP_BSS_START");
+ ap_cfg_running = TRUE;
+#else
+ iolen = wl_bssiovar_mkbuf("ssid", bsscfg_index, (char *)(&ap_ssid),
+ ap_ssid.SSID_len+4, buf, sizeof(buf), &mkvar_err);
+ ASSERT(iolen);
+ if ((res = dev_wlc_ioctl(dev, WLC_SET_VAR, buf, iolen)) != 0) {
+ WL_ERROR(("ERROR:%d in:%s, Security & BSS reconfiguration is skipped\n", \
+ res, __FUNCTION__));
+ goto fail;
+ }
+ if (ap_cfg_running == FALSE) {
+ init_completion(&ap_cfg_exited);
+ ap_cfg_pid = kernel_thread(thr_wait_for_2nd_eth_dev, dev, 0);
+ } else {
+ ap_cfg_pid = -1;
+ if (ap_net_dev == NULL) {
+ WL_ERROR(("%s ERROR: ap_net_dev is NULL !!!\n", __FUNCTION__));
+ goto fail;
+ }
+
+ WL_ERROR(("%s: %s Configure security & restart AP bss \n", \
+ __FUNCTION__, ap_net_dev->name));
+
+ if ((res = wl_iw_set_ap_security(ap_net_dev, &my_ap)) < 0) {
+ WL_ERROR(("%s fail to set security : %d\n", __FUNCTION__, res));
+ goto fail;
+ }
+
+ if ((res = dev_iw_write_cfg1_bss_var(dev, 1)) < 0) {
+ WL_ERROR(("%s fail to set bss up\n", __FUNCTION__));
+ goto fail;
+ }
+ }
+#endif
+fail:
+ WL_SOFTAP(("%s exit with %d\n", __FUNCTION__, res));
+
+ net_os_wake_unlock(dev);
+
+ return res;
+}
+
+
+static int wl_iw_set_ap_security(struct net_device *dev, struct ap_profile *ap)
+{
+ int wsec = 0;
+ int wpa_auth = 0;
+ int res = 0;
+ int i;
+ char *ptr;
+#ifdef AP_ONLY
+ int mpc = 0;
+ wlc_ssid_t ap_ssid;
+#endif
+ wl_wsec_key_t key;
+
+ WL_SOFTAP(("\nsetting SOFTAP security mode:\n"));
+ WL_SOFTAP(("wl_iw: set ap profile:\n"));
+ WL_SOFTAP((" ssid = '%s'\n", ap->ssid));
+ WL_SOFTAP((" security = '%s'\n", ap->sec));
+ if (ap->key[0] != '\0') {
+ WL_SOFTAP((" key = '%s'\n", ap->key));
+ }
+ WL_SOFTAP((" channel = %d\n", ap->channel));
+ WL_SOFTAP((" max scb = %d\n", ap->max_scb));
+
+ if (strnicmp(ap->sec, "open", strlen("open")) == 0) {
+ wsec = 0;
+ res = dev_wlc_intvar_set(dev, "wsec", wsec);
+ wpa_auth = WPA_AUTH_DISABLED;
+ res |= dev_wlc_intvar_set(dev, "wpa_auth", wpa_auth);
+
+ WL_SOFTAP(("=====================\n"));
+ WL_SOFTAP((" wsec & wpa_auth set 'OPEN', result:&d %d\n", res));
+ WL_SOFTAP(("=====================\n"));
+
+ } else if (strnicmp(ap->sec, "wep", strlen("wep")) == 0) {
+
+ memset(&key, 0, sizeof(key));
+
+ wsec = WEP_ENABLED;
+ res = dev_wlc_intvar_set(dev, "wsec", wsec);
+
+ key.index = 0;
+ if (wl_iw_parse_wep(ap->key, &key)) {
+ WL_SOFTAP(("wep key parse err!\n"));
+ return -1;
+ }
+
+ key.index = htod32(key.index);
+ key.len = htod32(key.len);
+ key.algo = htod32(key.algo);
+ key.flags = htod32(key.flags);
+
+ res |= dev_wlc_ioctl(dev, WLC_SET_KEY, &key, sizeof(key));
+
+ wpa_auth = WPA_AUTH_DISABLED;
+ res |= dev_wlc_intvar_set(dev, "wpa_auth", wpa_auth);
+
+ WL_SOFTAP(("=====================\n"));
+ WL_SOFTAP((" wsec & auth set 'WEP', result:&d %d\n", res));
+ WL_SOFTAP(("=====================\n"));
+
+ } else if (strnicmp(ap->sec, "wpa2-psk", strlen("wpa2-psk")) == 0) {
+ wsec_pmk_t psk;
+ size_t key_len;
+
+ wsec = AES_ENABLED;
+ dev_wlc_intvar_set(dev, "wsec", wsec);
+
+ key_len = strlen(ap->key);
+ if (key_len < WSEC_MIN_PSK_LEN || key_len > WSEC_MAX_PSK_LEN) {
+ WL_SOFTAP(("passphrase must be between %d and %d characters long\n",
+ WSEC_MIN_PSK_LEN, WSEC_MAX_PSK_LEN));
+ return -1;
+ }
+
+ if (key_len < WSEC_MAX_PSK_LEN) {
+ unsigned char output[2*SHA1HashSize];
+ char key_str_buf[WSEC_MAX_PSK_LEN+1];
+
+ memset(output, 0, sizeof(output));
+ pbkdf2_sha1(ap->key, ap->ssid, strlen(ap->ssid), 4096, output, 32);
+
+ ptr = key_str_buf;
+ for (i = 0; i < (WSEC_MAX_PSK_LEN/8); i++) {
+ sprintf(ptr, "%02x%02x%02x%02x", (uint)output[i*4], \
+ (uint)output[i*4+1], (uint)output[i*4+2], \
+ (uint)output[i*4+3]);
+ ptr += 8;
+ }
+ WL_SOFTAP(("%s: passphase = %s\n", __FUNCTION__, key_str_buf));
+
+ psk.key_len = htod16((ushort)WSEC_MAX_PSK_LEN);
+ memcpy(psk.key, key_str_buf, psk.key_len);
+ } else {
+ psk.key_len = htod16((ushort) key_len);
+ memcpy(psk.key, ap->key, key_len);
+ }
+ psk.flags = htod16(WSEC_PASSPHRASE);
+ dev_wlc_ioctl(dev, WLC_SET_WSEC_PMK, &psk, sizeof(psk));
+
+ wpa_auth = WPA2_AUTH_PSK;
+ dev_wlc_intvar_set(dev, "wpa_auth", wpa_auth);
+
+ } else if (strnicmp(ap->sec, "wpa-psk", strlen("wpa-psk")) == 0) {
+
+ wsec_pmk_t psk;
+ size_t key_len;
+
+ wsec = TKIP_ENABLED;
+ res = dev_wlc_intvar_set(dev, "wsec", wsec);
+
+ key_len = strlen(ap->key);
+ if (key_len < WSEC_MIN_PSK_LEN || key_len > WSEC_MAX_PSK_LEN) {
+ WL_SOFTAP(("passphrase must be between %d and %d characters long\n",
+ WSEC_MIN_PSK_LEN, WSEC_MAX_PSK_LEN));
+ return -1;
+ }
+
+ if (key_len < WSEC_MAX_PSK_LEN) {
+ unsigned char output[2*SHA1HashSize];
+ char key_str_buf[WSEC_MAX_PSK_LEN+1];
+ bzero(output, 2*SHA1HashSize);
+
+ WL_SOFTAP(("%s: do passhash...\n", __FUNCTION__));
+
+ pbkdf2_sha1(ap->key, ap->ssid, strlen(ap->ssid), 4096, output, 32);
+
+ ptr = key_str_buf;
+ for (i = 0; i < (WSEC_MAX_PSK_LEN/8); i++) {
+ WL_SOFTAP(("[%02d]: %08x\n", i, *((unsigned int *)&output[i*4])));
+
+ sprintf(ptr, "%02x%02x%02x%02x", (uint)output[i*4],
+ (uint)output[i*4+1], (uint)output[i*4+2],
+ (uint)output[i*4+3]);
+ ptr += 8;
+ }
+ WL_SOFTAP(("%s: passphase = %s\n", __FUNCTION__, key_str_buf));
+
+ psk.key_len = htod16((ushort)WSEC_MAX_PSK_LEN);
+ memcpy(psk.key, key_str_buf, psk.key_len);
+ } else {
+ psk.key_len = htod16((ushort) key_len);
+ memcpy(psk.key, ap->key, key_len);
+ }
+
+ psk.flags = htod16(WSEC_PASSPHRASE);
+ res |= dev_wlc_ioctl(dev, WLC_SET_WSEC_PMK, &psk, sizeof(psk));
+
+ wpa_auth = WPA_AUTH_PSK;
+ res |= dev_wlc_intvar_set(dev, "wpa_auth", wpa_auth);
+
+ WL_SOFTAP((" wsec & auth set 'wpa-psk' (TKIP), result:&d %d\n", res));
+ }
+
+#ifdef AP_ONLY
+ ap_ssid.SSID_len = strlen(ap->ssid);
+ strncpy(ap_ssid.SSID, ap->ssid, ap_ssid.SSID_len);
+ res |= dev_wlc_ioctl(dev, WLC_SET_SSID, &ap_ssid, sizeof(ap_ssid));
+ mpc = 0;
+ res |= dev_wlc_intvar_set(dev, "mpc", mpc);
+ if (strnicmp(ap->sec, "wep", strlen("wep")) == 0) {
+ res |= dev_wlc_ioctl(dev, WLC_SET_KEY, &key, sizeof(key));
+ }
+#endif
+ return res;
+}
+
+
+
+int get_parmeter_from_string(
+ char **str_ptr, const char *token,
+ int param_type, void *dst, int param_max_len)
+{
+ char int_str[7] = "0";
+ int parm_str_len;
+ char *param_str_begin;
+ char *param_str_end;
+
+ if ((*str_ptr) && !strncmp(*str_ptr, token, strlen(token))) {
+
+ strsep(str_ptr, "=,");
+ param_str_begin = *str_ptr;
+ strsep(str_ptr, "=,");
+
+ if (*str_ptr == NULL) {
+ parm_str_len = strlen(param_str_begin);
+ } else {
+ param_str_end = *str_ptr-1;
+ parm_str_len = param_str_end - param_str_begin;
+ }
+
+ WL_TRACE((" 'token:%s', len:%d, ", token, parm_str_len));
+
+ if (parm_str_len > param_max_len) {
+ WL_TRACE((" WARNING: extracted param len:%d is > MAX:%d\n",
+ parm_str_len, param_max_len));
+
+ parm_str_len = param_max_len;
+ }
+
+ switch (param_type) {
+
+ case PTYPE_INTDEC: {
+ int *pdst_int = dst;
+ char *eptr;
+
+ if (parm_str_len > sizeof(int_str))
+ parm_str_len = sizeof(int_str);
+
+ memcpy(int_str, param_str_begin, parm_str_len);
+
+ *pdst_int = simple_strtoul(int_str, &eptr, 10);
+
+ WL_TRACE((" written as integer:%d\n", *pdst_int));
+ }
+ break;
+ case PTYPE_STR_HEX: {
+ u8 *buf = dst;
+
+ param_max_len = param_max_len >> 1;
+ hstr_2_buf(param_str_begin, buf, param_max_len);
+ print_buf(buf, param_max_len, 0);
+ }
+ break;
+ default:
+ memcpy(dst, param_str_begin, parm_str_len);
+ *((char *)dst + parm_str_len) = 0;
+ WL_TRACE((" written as a string:%s\n", (char *)dst));
+ break;
+ }
+
+ return 0;
+ } else {
+ WL_ERROR(("\n %s: No token:%s in str:%s\n",
+ __FUNCTION__, token, *str_ptr));
+
+ return -1;
+ }
+}
+
+static int wl_iw_softap_deassoc_stations(struct net_device *dev, u8 *mac)
+{
+ int i;
+ int res = 0;
+ char mac_buf[128] = {0};
+ char z_mac[6] = {0, 0, 0, 0, 0, 0};
+ char *sta_mac;
+ struct maclist *assoc_maclist = (struct maclist *) mac_buf;
+ bool deauth_all = false;
+
+ if (mac == NULL) {
+ deauth_all = true;
+ sta_mac = z_mac;
+ } else {
+ sta_mac = mac;
+ }
+
+ memset(assoc_maclist, 0, sizeof(mac_buf));
+ assoc_maclist->count = 8;
+
+ res = dev_wlc_ioctl(dev, WLC_GET_ASSOCLIST, assoc_maclist, 128);
+ if (res != 0) {
+ WL_SOFTAP(("%s: Error:%d Couldn't get ASSOC List\n", __FUNCTION__, res));
+ return res;
+ }
+
+ if (assoc_maclist->count) {
+ for (i = 0; i < assoc_maclist->count; i++) {
+ scb_val_t scbval;
+
+ scbval.val = htod32(1);
+ bcopy(&assoc_maclist->ea[i], &scbval.ea, ETHER_ADDR_LEN);
+
+ if (deauth_all || (memcmp(&scbval.ea, sta_mac, ETHER_ADDR_LEN) == 0)) {
+ WL_SOFTAP(("%s, deauth STA:%d \n", __FUNCTION__, i));
+ res |= dev_wlc_ioctl(dev, WLC_SCB_DEAUTHENTICATE_FOR_REASON,
+ &scbval, sizeof(scb_val_t));
+ }
+ }
+ } else {
+ WL_SOFTAP((" STA ASSOC list is empty\n"));
+ }
+
+ if (res != 0) {
+ WL_ERROR(("%s: Error:%d\n", __FUNCTION__, res));
+ } else if (assoc_maclist->count) {
+ bcm_mdelay(200);
+ }
+ return res;
+}
+
+
+static int iwpriv_softap_stop(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *ext)
+{
+ int res = 0;
+
+ WL_SOFTAP(("got iwpriv AP_BSS_STOP\n"));
+
+ if ((!dev) && (!ap_net_dev)) {
+ WL_ERROR(("%s: dev is null\n", __FUNCTION__));
+ return res;
+ }
+
+ net_os_wake_lock(dev);
+
+ if ((ap_cfg_running == TRUE)) {
+#ifdef AP_ONLY
+ wl_iw_softap_deassoc_stations(dev, NULL);
+#else
+ wl_iw_softap_deassoc_stations(ap_net_dev, NULL);
+
+ if ((res = dev_iw_write_cfg1_bss_var(dev, 2)) < 0)
+ WL_ERROR(("%s failed to del BSS err = %d", __FUNCTION__, res));
+#endif
+
+ bcm_mdelay(100);
+
+ wrqu->data.length = 0;
+ ap_cfg_running = FALSE;
+ }
+ else
+ WL_ERROR(("%s: was called when SoftAP is OFF : move on\n", __FUNCTION__));
+
+ WL_SOFTAP(("%s Done with %d\n", __FUNCTION__, res));
+
+ net_os_wake_unlock(dev);
+
+ return res;
+}
+
+
+static int iwpriv_fw_reload(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *ext)
+{
+ int ret = -1;
+ char extra[256];
+ char *fwstr = fw_path;
+
+ WL_SOFTAP(("current firmware_path[]=%s\n", fwstr));
+
+ WL_TRACE((">Got FW_RELOAD cmd:"
+ "info->cmd:%x, info->flags:%x, u.data:%p, u.len:%d, \
+ fw_path:%p, len:%d \n",
+ info->cmd, info->flags,
+ wrqu->data.pointer, wrqu->data.length, fwstr, strlen(fwstr)));
+
+ if ((wrqu->data.length > 4) && (wrqu->data.length < sizeof(extra))) {
+
+ char *str_ptr;
+
+ if (copy_from_user(extra, wrqu->data.pointer, wrqu->data.length)) {
+ ret = -EFAULT;
+ goto exit_proc;
+ }
+
+ extra[wrqu->data.length] = 8;
+ str_ptr = extra;
+
+ if (get_parmeter_from_string(&str_ptr, "FW_PATH=", PTYPE_STRING, fwstr, 255) != 0) {
+ WL_ERROR(("Error: extracting FW_PATH='' string\n"));
+ goto exit_proc;
+ }
+
+ if (strstr(fwstr, "apsta") != NULL) {
+ WL_SOFTAP(("GOT APSTA FIRMWARE\n"));
+ ap_fw_loaded = TRUE;
+ } else {
+ WL_SOFTAP(("GOT STA FIRMWARE\n"));
+ ap_fw_loaded = FALSE;
+ }
+
+ WL_SOFTAP(("SET firmware_path[]=%s , str_p:%p\n", fwstr, fwstr));
+ ret = 0;
+ } else {
+ WL_ERROR(("Error: ivalid param len:%d\n", wrqu->data.length));
+ }
+
+exit_proc:
+ return ret;
+}
+#endif
+
+#ifdef SOFTAP
+static int iwpriv_wpasupp_loop_tst(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *ext)
+{
+ int res = 0;
+ char *params = NULL;
+
+ WL_TRACE((">Got IWPRIV wp_supp loopback cmd test:"
+ "info->cmd:%x, info->flags:%x, u.data:%p, u.len:%d\n",
+ info->cmd, info->flags,
+ wrqu->data.pointer, wrqu->data.length));
+
+ if (wrqu->data.length != 0) {
+
+ if (!(params = kmalloc(wrqu->data.length+1, GFP_KERNEL)))
+ return -ENOMEM;
+
+ if (copy_from_user(params, wrqu->data.pointer, wrqu->data.length)) {
+ kfree(params);
+ return -EFAULT;
+ }
+
+ params[wrqu->data.length] = 0;
+ WL_SOFTAP(("\n>> copied from user:\n %s\n", params));
+ } else {
+ WL_ERROR(("ERROR param length is 0\n"));
+ return -EFAULT;
+ }
+
+ res = wl_iw_send_priv_event(dev, params);
+ kfree(params);
+
+ return res;
+}
+#endif
+
+
+static int
+iwpriv_en_ap_bss(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ void *wrqu,
+ char *extra)
+{
+ int res = 0;
+
+ if (!dev) {
+ WL_ERROR(("%s: dev is null\n", __FUNCTION__));
+ return -1;
+ }
+
+ net_os_wake_lock(dev);
+
+ WL_SOFTAP(("%s: rcvd IWPRIV IOCTL: for dev:%s\n", __FUNCTION__, dev->name));
+
+#ifndef AP_ONLY
+ if (ap_cfg_pid >= 0) {
+ wait_for_completion(&ap_cfg_exited);
+ ap_cfg_pid = -1;
+ }
+
+ if ((res = wl_iw_set_ap_security(dev, &my_ap)) != 0) {
+ WL_ERROR((" %s ERROR setting SOFTAP security in :%d\n", __FUNCTION__, res));
+ }
+ else {
+ if ((res = dev_iw_write_cfg1_bss_var(dev, 1)) < 0)
+ WL_ERROR(("%s fail to set bss up err=%d\n", __FUNCTION__, res));
+ else
+ bcm_mdelay(100);
+ }
+
+#endif
+ WL_SOFTAP(("%s done with res %d \n", __FUNCTION__, res));
+
+ net_os_wake_unlock(dev);
+
+ return res;
+}
+
+static int
+get_assoc_sta_list(struct net_device *dev, char *buf, int len)
+{
+ WL_TRACE(("%s: dev_wlc_ioctl(dev:%p, cmd:%d, buf:%p, len:%d)\n",
+ __FUNCTION__, dev, WLC_GET_ASSOCLIST, buf, len));
+
+ return dev_wlc_ioctl(dev, WLC_GET_ASSOCLIST, buf, len);
+
+}
+
+
+void check_error(int res, const char *msg, const char *func, int line)
+{
+ if (res != 0)
+ WL_ERROR(("%s, %d function:%s, line:%d\n", msg, res, func, line));
+}
+
+static int
+set_ap_mac_list(struct net_device *dev, void *buf)
+{
+ struct mac_list_set *mac_list_set = (struct mac_list_set *)buf;
+ struct maclist *maclist = (struct maclist *)&mac_list_set->mac_list;
+ int length;
+ int i;
+ int mac_mode = mac_list_set->mode;
+ int ioc_res = 0;
+ ap_macmode = mac_list_set->mode;
+
+ bzero(&ap_black_list, sizeof(struct mflist));
+
+ if (mac_mode == MACLIST_MODE_DISABLED) {
+
+ ioc_res = dev_wlc_ioctl(dev, WLC_SET_MACMODE, &mac_mode, sizeof(mac_mode));
+ check_error(ioc_res, "ioctl ERROR:", __FUNCTION__, __LINE__);
+ WL_SOFTAP(("%s: MAC filtering disabled\n", __FUNCTION__));
+ } else {
+
+ scb_val_t scbval;
+ char mac_buf[256] = {0};
+ struct maclist *assoc_maclist = (struct maclist *) mac_buf;
+
+ bcopy(maclist, &ap_black_list, sizeof(ap_black_list));
+
+ ioc_res = dev_wlc_ioctl(dev, WLC_SET_MACMODE, &mac_mode, sizeof(mac_mode));
+ check_error(ioc_res, "ioctl ERROR:", __FUNCTION__, __LINE__);
+
+ length = sizeof(maclist->count) + maclist->count*ETHER_ADDR_LEN;
+ dev_wlc_ioctl(dev, WLC_SET_MACLIST, maclist, length);
+
+ WL_SOFTAP(("%s: applied MAC List, mode:%d, length %d:\n",
+ __FUNCTION__, mac_mode, length));
+ for (i = 0; i < maclist->count; i++)
+ WL_SOFTAP(("mac %d: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ i, maclist->ea[i].octet[0], maclist->ea[i].octet[1], \
+ maclist->ea[i].octet[2], \
+ maclist->ea[i].octet[3], maclist->ea[i].octet[4], \
+ maclist->ea[i].octet[5]));
+
+ assoc_maclist->count = 8;
+ ioc_res = dev_wlc_ioctl(dev, WLC_GET_ASSOCLIST, assoc_maclist, 256);
+ check_error(ioc_res, "ioctl ERROR:", __FUNCTION__, __LINE__);
+ WL_SOFTAP((" Cur assoc clients:%d\n", assoc_maclist->count));
+
+ if (assoc_maclist->count)
+ for (i = 0; i < assoc_maclist->count; i++) {
+ int j;
+ bool assoc_mac_matched = false;
+
+ WL_SOFTAP(("\n Cheking assoc STA: "));
+ print_buf(&assoc_maclist->ea[i], 6, 7);
+ WL_SOFTAP(("with the b/w list:"));
+
+ for (j = 0; j < maclist->count; j++)
+ if (!bcmp(&assoc_maclist->ea[i], &maclist->ea[j],
+ ETHER_ADDR_LEN)) {
+
+ assoc_mac_matched = true;
+ break;
+ }
+
+ if (((mac_mode == MACLIST_MODE_ALLOW) && !assoc_mac_matched) ||
+ ((mac_mode == MACLIST_MODE_DENY) && assoc_mac_matched)) {
+
+ WL_SOFTAP(("b-match or w-mismatch,"
+ " do deauth/disassoc \n"));
+ scbval.val = htod32(1);
+ bcopy(&assoc_maclist->ea[i], &scbval.ea, \
+ ETHER_ADDR_LEN);
+ ioc_res = dev_wlc_ioctl(dev,
+ WLC_SCB_DEAUTHENTICATE_FOR_REASON,
+ &scbval, sizeof(scb_val_t));
+ check_error(ioc_res,
+ "ioctl ERROR:",
+ __FUNCTION__, __LINE__);
+
+ } else {
+ WL_SOFTAP((" no b/w list hits, let it be\n"));
+ }
+ } else {
+ WL_SOFTAP(("No ASSOC CLIENTS\n"));
+ }
+ }
+
+ WL_SOFTAP(("%s iocres:%d\n", __FUNCTION__, ioc_res));
+ return ioc_res;
+}
+#endif
+
+
+#ifdef SOFTAP
+int set_macfilt_from_string(struct mflist *pmflist, char **param_str)
+{
+ return 0;
+}
+#endif
+
+
+#ifdef SOFTAP
+#define PARAM_OFFSET PROFILE_OFFSET
+
+int wl_iw_process_private_ascii_cmd(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *dwrq,
+ char *cmd_str)
+{
+ int ret = 0;
+ char *sub_cmd = cmd_str + PROFILE_OFFSET + strlen("ASCII_CMD=");
+
+ WL_SOFTAP(("\n %s: ASCII_CMD: offs_0:%s, offset_32:\n'%s'\n",
+ __FUNCTION__, cmd_str, cmd_str + PROFILE_OFFSET));
+
+ if (strnicmp(sub_cmd, "AP_CFG", strlen("AP_CFG")) == 0) {
+
+ WL_SOFTAP((" AP_CFG \n"));
+
+
+ if (init_ap_profile_from_string(cmd_str+PROFILE_OFFSET, &my_ap) != 0) {
+ WL_ERROR(("ERROR: SoftAP CFG prams !\n"));
+ ret = -1;
+ } else {
+ ret = set_ap_cfg(dev, &my_ap);
+ }
+
+ } else if (strnicmp(sub_cmd, "AP_BSS_START", strlen("AP_BSS_START")) == 0) {
+
+ WL_SOFTAP(("\n SOFTAP - ENABLE BSS \n"));
+
+ WL_SOFTAP(("\n!!! got 'WL_AP_EN_BSS' from WPA supplicant, dev:%s\n", dev->name));
+
+#ifndef AP_ONLY
+ if (ap_net_dev == NULL) {
+ printf("\n ERROR: SOFTAP net_dev* is NULL !!!\n");
+ } else {
+ if ((ret = iwpriv_en_ap_bss(ap_net_dev, info, dwrq, cmd_str)) < 0)
+ WL_ERROR(("%s line %d fail to set bss up\n", \
+ __FUNCTION__, __LINE__));
+ }
+#else
+ if ((ret = iwpriv_en_ap_bss(dev, info, dwrq, cmd_str)) < 0)
+ WL_ERROR(("%s line %d fail to set bss up\n", \
+ __FUNCTION__, __LINE__));
+#endif
+ } else if (strnicmp(sub_cmd, "ASSOC_LST", strlen("ASSOC_LST")) == 0) {
+ /* no code yet */
+ } else if (strnicmp(sub_cmd, "AP_BSS_STOP", strlen("AP_BSS_STOP")) == 0) {
+ WL_SOFTAP((" \n temp DOWN SOFTAP\n"));
+#ifndef AP_ONLY
+ if ((ret = dev_iw_write_cfg1_bss_var(dev, 0)) < 0) {
+ WL_ERROR(("%s line %d fail to set bss down\n", \
+ __FUNCTION__, __LINE__));
+ }
+#endif
+ }
+
+ return ret;
+}
+#endif
+
+static int wl_iw_set_priv(
+ struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *ext
+)
+{
+ int ret = 0;
+ char * extra;
+
+ if (!(extra = kmalloc(dwrq->length, GFP_KERNEL)))
+ return -ENOMEM;
+
+ if (copy_from_user(extra, dwrq->pointer, dwrq->length)) {
+ kfree(extra);
+ return -EFAULT;
+ }
+
+ WL_TRACE(("%s: SIOCSIWPRIV request %s, info->cmd:%x, info->flags:%d\n dwrq->length:%d",
+ dev->name, extra, info->cmd, info->flags, dwrq->length));
+
+ net_os_wake_lock(dev);
+
+ if (dwrq->length && extra) {
+ if (strnicmp(extra, "START", strlen("START")) == 0) {
+ wl_iw_control_wl_on(dev, info);
+ WL_TRACE(("%s, Received regular START command\n", __FUNCTION__));
+ }
+
+ if (g_onoff == G_WLAN_SET_OFF) {
+ WL_TRACE(("%s, missing START, Fail\n", __FUNCTION__));
+ kfree(extra);
+ net_os_wake_unlock(dev);
+ return -EFAULT;
+ }
+
+ if (strnicmp(extra, "SCAN-ACTIVE", strlen("SCAN-ACTIVE")) == 0) {
+#ifdef ENABLE_ACTIVE_PASSIVE_SCAN_SUPPRESS
+ WL_TRACE(("%s: active scan setting suppressed\n", dev->name));
+#else
+ ret = wl_iw_set_active_scan(dev, info, (union iwreq_data *)dwrq, extra);
+#endif
+ } else if (strnicmp(extra, "SCAN-PASSIVE", strlen("SCAN-PASSIVE")) == 0)
+#ifdef ENABLE_ACTIVE_PASSIVE_SCAN_SUPPRESS
+ WL_TRACE(("%s: passive scan setting suppressed\n", dev->name));
+#else
+ ret = wl_iw_set_passive_scan(dev, info, (union iwreq_data *)dwrq, extra);
+#endif
+ else if (strnicmp(extra, "RSSI", strlen("RSSI")) == 0)
+ ret = wl_iw_get_rssi(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, "LINKSPEED", strlen("LINKSPEED")) == 0)
+ ret = wl_iw_get_link_speed(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, "MACADDR", strlen("MACADDR")) == 0)
+ ret = wl_iw_get_macaddr(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, "COUNTRY", strlen("COUNTRY")) == 0)
+ ret = wl_iw_set_country(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, "STOP", strlen("STOP")) == 0)
+ ret = wl_iw_control_wl_off(dev, info);
+ else if (strnicmp(extra, BAND_GET_CMD, strlen(BAND_GET_CMD)) == 0)
+ ret = wl_iw_get_band(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, BAND_SET_CMD, strlen(BAND_SET_CMD)) == 0)
+ ret = wl_iw_set_band(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, DTIM_SKIP_GET_CMD, strlen(DTIM_SKIP_GET_CMD)) == 0)
+ ret = wl_iw_get_dtim_skip(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, DTIM_SKIP_SET_CMD, strlen(DTIM_SKIP_SET_CMD)) == 0)
+ ret = wl_iw_set_dtim_skip(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, SETSUSPEND_CMD, strlen(SETSUSPEND_CMD)) == 0)
+ ret = wl_iw_set_suspend(dev, info, (union iwreq_data *)dwrq, extra);
+#ifdef CONFIG_US_NON_DFS_CHANNELS_ONLY
+ else if (strnicmp(extra, SETDFSCHANNELS_CMD, strlen(SETDFSCHANNELS_CMD)) == 0)
+ ret = wl_iw_set_dfs_channels(dev, info, (union iwreq_data *)dwrq, extra);
+#endif
+#if defined(PNO_SUPPORT)
+ else if (strnicmp(extra, PNOSSIDCLR_SET_CMD, strlen(PNOSSIDCLR_SET_CMD)) == 0)
+ ret = wl_iw_set_pno_reset(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, PNOSETUP_SET_CMD, strlen(PNOSETUP_SET_CMD)) == 0)
+ ret = wl_iw_set_pno_set(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, PNOENABLE_SET_CMD, strlen(PNOENABLE_SET_CMD)) == 0)
+ ret = wl_iw_set_pno_enable(dev, info, (union iwreq_data *)dwrq, extra);
+#endif
+#if defined(CSCAN)
+ else if (strnicmp(extra, CSCAN_COMMAND, strlen(CSCAN_COMMAND)) == 0)
+ ret = wl_iw_set_cscan(dev, info, (union iwreq_data *)dwrq, extra);
+#endif
+#ifdef CUSTOMER_HW2
+ else if (strnicmp(extra, "POWERMODE", strlen("POWERMODE")) == 0)
+ ret = wl_iw_set_power_mode(dev, info, (union iwreq_data *)dwrq, extra);
+ else if (strnicmp(extra, "BTCOEXMODE", strlen("BTCOEXMODE")) == 0)
+ ret = wl_iw_set_btcoex_dhcp(dev, info, (union iwreq_data *)dwrq, extra);
+#else
+ else if (strnicmp(extra, "POWERMODE", strlen("POWERMODE")) == 0)
+ ret = wl_iw_set_btcoex_dhcp(dev, info, (union iwreq_data *)dwrq, extra);
+#endif
+ else if (strnicmp(extra, "GETPOWER", strlen("GETPOWER")) == 0)
+ ret = wl_iw_get_power_mode(dev, info, (union iwreq_data *)dwrq, extra);
+#ifdef SOFTAP
+ else if (strnicmp(extra, "ASCII_CMD", strlen("ASCII_CMD")) == 0) {
+ wl_iw_process_private_ascii_cmd(dev, info, (union iwreq_data *)dwrq, extra);
+ } else if (strnicmp(extra, "AP_MAC_LIST_SET", strlen("AP_MAC_LIST_SET")) == 0) {
+ WL_SOFTAP(("penguin, set AP_MAC_LIST_SET\n"));
+ set_ap_mac_list(dev, (extra + PROFILE_OFFSET));
+ }
+#endif
+ else {
+ WL_TRACE(("Unknown PRIVATE command: %s: ignored\n", extra));
+ snprintf(extra, MAX_WX_STRING, "OK");
+ dwrq->length = strlen("OK") + 1;
+ }
+ }
+
+ net_os_wake_unlock(dev);
+
+ if (extra) {
+ if (copy_to_user(dwrq->pointer, extra, dwrq->length)) {
+ kfree(extra);
+ return -EFAULT;
+ }
+
+ kfree(extra);
+ }
+
+ return ret;
+}
+
+static const iw_handler wl_iw_handler[] =
+{
+ (iw_handler) wl_iw_config_commit,
+ (iw_handler) wl_iw_get_name,
+ (iw_handler) NULL,
+ (iw_handler) NULL,
+ (iw_handler) wl_iw_set_freq,
+ (iw_handler) wl_iw_get_freq,
+ (iw_handler) wl_iw_set_mode,
+ (iw_handler) wl_iw_get_mode,
+ (iw_handler) NULL,
+ (iw_handler) NULL,
+ (iw_handler) NULL,
+ (iw_handler) wl_iw_get_range,
+ (iw_handler) wl_iw_set_priv,
+ (iw_handler) NULL,
+ (iw_handler) NULL,
+ (iw_handler) NULL,
+ (iw_handler) wl_iw_set_spy,
+ (iw_handler) wl_iw_get_spy,
+ (iw_handler) NULL,
+ (iw_handler) NULL,
+ (iw_handler) wl_iw_set_wap,
+ (iw_handler) wl_iw_get_wap,
+#if WIRELESS_EXT > 17
+ (iw_handler) wl_iw_mlme,
+#else
+ (iw_handler) NULL,
+#endif
+#if defined(WL_IW_USE_ISCAN)
+ (iw_handler) wl_iw_iscan_get_aplist,
+#else
+ (iw_handler) wl_iw_get_aplist,
+#endif
+#if WIRELESS_EXT > 13
+#if defined(WL_IW_USE_ISCAN)
+ (iw_handler) wl_iw_iscan_set_scan,
+ (iw_handler) wl_iw_iscan_get_scan,
+#else
+ (iw_handler) wl_iw_set_scan,
+ (iw_handler) wl_iw_get_scan,
+#endif
+#else
+ (iw_handler) NULL,
+ (iw_handler) NULL,
+#endif
+ (iw_handler) wl_iw_set_essid,
+ (iw_handler) wl_iw_get_essid,
+ (iw_handler) wl_iw_set_nick,
+ (iw_handler) wl_iw_get_nick,
+ (iw_handler) NULL,
+ (iw_handler) NULL,
+ (iw_handler) wl_iw_set_rate,
+ (iw_handler) wl_iw_get_rate,
+ (iw_handler) wl_iw_set_rts,
+ (iw_handler) wl_iw_get_rts,
+ (iw_handler) wl_iw_set_frag,
+ (iw_handler) wl_iw_get_frag,
+ (iw_handler) wl_iw_set_txpow,
+ (iw_handler) wl_iw_get_txpow,
+#if WIRELESS_EXT > 10
+ (iw_handler) wl_iw_set_retry,
+ (iw_handler) wl_iw_get_retry,
+#endif
+ (iw_handler) wl_iw_set_encode,
+ (iw_handler) wl_iw_get_encode,
+ (iw_handler) wl_iw_set_power,
+ (iw_handler) wl_iw_get_power,
+#if WIRELESS_EXT > 17
+ (iw_handler) NULL,
+ (iw_handler) NULL,
+ (iw_handler) wl_iw_set_wpaie,
+ (iw_handler) wl_iw_get_wpaie,
+ (iw_handler) wl_iw_set_wpaauth,
+ (iw_handler) wl_iw_get_wpaauth,
+ (iw_handler) wl_iw_set_encodeext,
+ (iw_handler) wl_iw_get_encodeext,
+#ifdef BCMWPA2
+ (iw_handler) wl_iw_set_pmksa,
+#endif
+#endif
+};
+
+#if WIRELESS_EXT > 12
+static const iw_handler wl_iw_priv_handler[] = {
+ NULL,
+ (iw_handler)wl_iw_set_active_scan,
+ NULL,
+ (iw_handler)wl_iw_get_rssi,
+ NULL,
+ (iw_handler)wl_iw_set_passive_scan,
+ NULL,
+ (iw_handler)wl_iw_get_link_speed,
+ NULL,
+ (iw_handler)wl_iw_get_macaddr,
+ NULL,
+ (iw_handler)wl_iw_control_wl_off,
+ NULL,
+ (iw_handler)wl_iw_control_wl_on,
+#ifdef SOFTAP
+ NULL,
+ (iw_handler)iwpriv_set_ap_config,
+
+ NULL,
+ (iw_handler)iwpriv_get_assoc_list,
+
+ NULL,
+ (iw_handler)iwpriv_set_mac_filters,
+
+ NULL,
+ (iw_handler)iwpriv_en_ap_bss,
+
+ NULL,
+ (iw_handler)iwpriv_wpasupp_loop_tst,
+
+ NULL,
+ (iw_handler)iwpriv_softap_stop,
+
+ NULL,
+ (iw_handler)iwpriv_fw_reload,
+
+ NULL,
+ (iw_handler)iwpriv_set_ap_sta_disassoc,
+#endif
+#if defined(CSCAN)
+
+ NULL,
+ (iw_handler)iwpriv_set_cscan
+#endif
+};
+
+static const struct iw_priv_args wl_iw_priv_args[] = {
+ {
+ WL_IW_SET_ACTIVE_SCAN,
+ 0,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ "SCAN-ACTIVE"
+ },
+ {
+ WL_IW_GET_RSSI,
+ 0,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ "RSSI"
+ },
+ {
+ WL_IW_SET_PASSIVE_SCAN,
+ 0,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ "SCAN-PASSIVE"
+ },
+ {
+ WL_IW_GET_LINK_SPEED,
+ 0,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ "LINKSPEED"
+ },
+ {
+ WL_IW_GET_CURR_MACADDR,
+ 0,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ "Macaddr"
+ },
+ {
+ WL_IW_SET_STOP,
+ 0,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ "STOP"
+ },
+ {
+ WL_IW_SET_START,
+ 0,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ "START"
+ },
+
+#ifdef SOFTAP
+ {
+ WL_SET_AP_CFG,
+ IW_PRIV_TYPE_CHAR | 256,
+ 0,
+ "AP_SET_CFG"
+ },
+
+ {
+ WL_AP_STA_LIST,
+ IW_PRIV_TYPE_CHAR | 0,
+ IW_PRIV_TYPE_CHAR | 1024,
+ "AP_GET_STA_LIST"
+ },
+
+ {
+ WL_AP_MAC_FLTR,
+ IW_PRIV_TYPE_CHAR | 256,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 0,
+ "AP_SET_MAC_FLTR"
+ },
+
+ {
+ WL_AP_BSS_START,
+ 0,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
+ "AP_BSS_START"
+ },
+
+ {
+ AP_LPB_CMD,
+ IW_PRIV_TYPE_CHAR | 256,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 0,
+ "AP_LPB_CMD"
+ },
+
+ {
+ WL_AP_STOP,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 0,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 0,
+ "AP_BSS_STOP"
+ },
+
+ {
+ WL_FW_RELOAD,
+ IW_PRIV_TYPE_CHAR | 256,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 0,
+ "WL_FW_RELOAD"
+ },
+
+ {
+ WL_AP_STA_DISASSOC,
+ IW_PRIV_TYPE_CHAR | 256,
+ IW_PRIV_TYPE_CHAR | 0,
+ "AP_STA_DISASSOC"
+ },
+#endif
+#if defined(CSCAN)
+ {
+ WL_COMBO_SCAN,
+ IW_PRIV_TYPE_CHAR | 1024,
+ 0,
+ "CSCAN"
+ },
+#endif
+};
+
+const struct iw_handler_def wl_iw_handler_def =
+{
+ .num_standard = ARRAYSIZE(wl_iw_handler),
+ .standard = (iw_handler *) wl_iw_handler,
+ .num_private = ARRAYSIZE(wl_iw_priv_handler),
+ .num_private_args = ARRAY_SIZE(wl_iw_priv_args),
+ .private = (iw_handler *)wl_iw_priv_handler,
+ .private_args = (void *) wl_iw_priv_args,
+
+#if WIRELESS_EXT >= 19
+ get_wireless_stats: dhd_get_wireless_stats,
+#endif
+};
+#endif
+
+
+int wl_iw_ioctl(
+ struct net_device *dev,
+ struct ifreq *rq,
+ int cmd
+)
+{
+ struct iwreq *wrq = (struct iwreq *) rq;
+ struct iw_request_info info;
+ iw_handler handler;
+ char *extra = NULL;
+ int token_size = 1, max_tokens = 0, ret = 0;
+
+ net_os_wake_lock(dev);
+
+ WL_TRACE(("%s: cmd:%x alled via dhd->do_ioctl()entry point\n", __FUNCTION__, cmd));
+ if (cmd < SIOCIWFIRST ||
+ IW_IOCTL_IDX(cmd) >= ARRAYSIZE(wl_iw_handler) ||
+ !(handler = wl_iw_handler[IW_IOCTL_IDX(cmd)])) {
+ WL_ERROR(("%s: error in cmd=%x : not supported\n", __FUNCTION__, cmd));
+ net_os_wake_unlock(dev);
+ return -EOPNOTSUPP;
+ }
+
+ switch (cmd) {
+
+ case SIOCSIWESSID:
+ case SIOCGIWESSID:
+ case SIOCSIWNICKN:
+ case SIOCGIWNICKN:
+ max_tokens = IW_ESSID_MAX_SIZE + 1;
+ break;
+
+ case SIOCSIWENCODE:
+ case SIOCGIWENCODE:
+#if WIRELESS_EXT > 17
+ case SIOCSIWENCODEEXT:
+ case SIOCGIWENCODEEXT:
+#endif
+ max_tokens = wrq->u.data.length;
+ break;
+
+ case SIOCGIWRANGE:
+ max_tokens = sizeof(struct iw_range) + 500;
+ break;
+
+ case SIOCGIWAPLIST:
+ token_size = sizeof(struct sockaddr) + sizeof(struct iw_quality);
+ max_tokens = IW_MAX_AP;
+ break;
+
+#if WIRELESS_EXT > 13
+ case SIOCGIWSCAN:
+#if defined(WL_IW_USE_ISCAN)
+ if (g_iscan)
+ max_tokens = wrq->u.data.length;
+ else
+#endif
+ max_tokens = IW_SCAN_MAX_DATA;
+ break;
+#endif
+
+ case SIOCSIWSPY:
+ token_size = sizeof(struct sockaddr);
+ max_tokens = IW_MAX_SPY;
+ break;
+
+ case SIOCGIWSPY:
+ token_size = sizeof(struct sockaddr) + sizeof(struct iw_quality);
+ max_tokens = IW_MAX_SPY;
+ break;
+
+#if WIRELESS_EXT > 17
+ case SIOCSIWPMKSA:
+ case SIOCSIWGENIE:
+#endif
+ case SIOCSIWPRIV:
+ max_tokens = wrq->u.data.length;
+ break;
+ }
+
+ if (max_tokens && wrq->u.data.pointer) {
+ if (wrq->u.data.length > max_tokens) {
+ WL_ERROR(("%s: error in cmd=%x wrq->u.data.length=%d > max_tokens=%d\n", \
+ __FUNCTION__, cmd, wrq->u.data.length, max_tokens));
+ ret = -E2BIG;
+ goto wl_iw_ioctl_done;
+ }
+ if (!(extra = kmalloc(max_tokens * token_size, GFP_KERNEL))) {
+ ret = -ENOMEM;
+ goto wl_iw_ioctl_done;
+ }
+
+ if (copy_from_user(extra, wrq->u.data.pointer, wrq->u.data.length * token_size)) {
+ kfree(extra);
+ ret = -EFAULT;
+ goto wl_iw_ioctl_done;
+ }
+ }
+
+ info.cmd = cmd;
+ info.flags = 0;
+
+ ret = handler(dev, &info, &wrq->u, extra);
+
+ if (extra) {
+ if (copy_to_user(wrq->u.data.pointer, extra, wrq->u.data.length * token_size)) {
+ kfree(extra);
+ ret = -EFAULT;
+ goto wl_iw_ioctl_done;
+ }
+
+ kfree(extra);
+ }
+
+wl_iw_ioctl_done:
+
+ net_os_wake_unlock(dev);
+
+ return ret;
+}
+
+
+bool
+wl_iw_conn_status_str(uint32 event_type, uint32 status, uint32 reason,
+ char* stringBuf, uint buflen)
+{
+ typedef struct conn_fail_event_map_t {
+ uint32 inEvent;
+ uint32 inStatus;
+ uint32 inReason;
+ const char* outName;
+ const char* outCause;
+ } conn_fail_event_map_t;
+
+
+# define WL_IW_DONT_CARE 9999
+ const conn_fail_event_map_t event_map [] = {
+
+
+ {WLC_E_SET_SSID, WLC_E_STATUS_SUCCESS, WL_IW_DONT_CARE,
+ "Conn", "Success"},
+ {WLC_E_SET_SSID, WLC_E_STATUS_NO_NETWORKS, WL_IW_DONT_CARE,
+ "Conn", "NoNetworks"},
+ {WLC_E_SET_SSID, WLC_E_STATUS_FAIL, WL_IW_DONT_CARE,
+ "Conn", "ConfigMismatch"},
+ {WLC_E_PRUNE, WL_IW_DONT_CARE, WLC_E_PRUNE_ENCR_MISMATCH,
+ "Conn", "EncrypMismatch"},
+ {WLC_E_PRUNE, WL_IW_DONT_CARE, WLC_E_RSN_MISMATCH,
+ "Conn", "RsnMismatch"},
+ {WLC_E_AUTH, WLC_E_STATUS_TIMEOUT, WL_IW_DONT_CARE,
+ "Conn", "AuthTimeout"},
+ {WLC_E_AUTH, WLC_E_STATUS_FAIL, WL_IW_DONT_CARE,
+ "Conn", "AuthFail"},
+ {WLC_E_AUTH, WLC_E_STATUS_NO_ACK, WL_IW_DONT_CARE,
+ "Conn", "AuthNoAck"},
+ {WLC_E_REASSOC, WLC_E_STATUS_FAIL, WL_IW_DONT_CARE,
+ "Conn", "ReassocFail"},
+ {WLC_E_REASSOC, WLC_E_STATUS_TIMEOUT, WL_IW_DONT_CARE,
+ "Conn", "ReassocTimeout"},
+ {WLC_E_REASSOC, WLC_E_STATUS_ABORT, WL_IW_DONT_CARE,
+ "Conn", "ReassocAbort"},
+ {WLC_E_PSK_SUP, WLC_SUP_KEYED, WL_IW_DONT_CARE,
+ "Sup", "ConnSuccess"},
+ {WLC_E_PSK_SUP, WL_IW_DONT_CARE, WL_IW_DONT_CARE,
+ "Sup", "WpaHandshakeFail"},
+ {WLC_E_DEAUTH_IND, WL_IW_DONT_CARE, WL_IW_DONT_CARE,
+ "Conn", "Deauth"},
+ {WLC_E_DISASSOC_IND, WL_IW_DONT_CARE, WL_IW_DONT_CARE,
+ "Conn", "DisassocInd"},
+ {WLC_E_DISASSOC, WL_IW_DONT_CARE, WL_IW_DONT_CARE,
+ "Conn", "Disassoc"}
+ };
+
+ const char* name = "";
+ const char* cause = NULL;
+ int i;
+
+
+ for (i = 0; i < sizeof(event_map)/sizeof(event_map[0]); i++) {
+ const conn_fail_event_map_t* row = &event_map[i];
+ if (row->inEvent == event_type &&
+ (row->inStatus == status || row->inStatus == WL_IW_DONT_CARE) &&
+ (row->inReason == reason || row->inReason == WL_IW_DONT_CARE)) {
+ name = row->outName;
+ cause = row->outCause;
+ break;
+ }
+ }
+
+
+ if (cause) {
+ memset(stringBuf, 0, buflen);
+ snprintf(stringBuf, buflen, "%s %s %02d %02d",
+ name, cause, status, reason);
+ WL_INFORM(("Connection status: %s\n", stringBuf));
+ return TRUE;
+ } else {
+ return FALSE;
+ }
+}
+
+#if WIRELESS_EXT > 14
+
+static bool
+wl_iw_check_conn_fail(wl_event_msg_t *e, char* stringBuf, uint buflen)
+{
+ uint32 event = ntoh32(e->event_type);
+ uint32 status = ntoh32(e->status);
+ uint32 reason = ntoh32(e->reason);
+
+ if (wl_iw_conn_status_str(event, status, reason, stringBuf, buflen)) {
+ return TRUE;
+ }
+ else
+ return FALSE;
+}
+#endif
+
+#ifndef IW_CUSTOM_MAX
+#define IW_CUSTOM_MAX 256
+#endif
+
+void
+wl_iw_event(struct net_device *dev, wl_event_msg_t *e, void* data)
+{
+#if WIRELESS_EXT > 13
+ union iwreq_data wrqu;
+ char extra[IW_CUSTOM_MAX + 1];
+ int cmd = 0;
+ uint32 event_type = ntoh32(e->event_type);
+ uint16 flags = ntoh16(e->flags);
+ uint32 datalen = ntoh32(e->datalen);
+ uint32 status = ntoh32(e->status);
+ uint32 toto;
+ static uint32 roam_no_success = 0;
+ static bool roam_no_success_send = FALSE;
+
+ memset(&wrqu, 0, sizeof(wrqu));
+ memset(extra, 0, sizeof(extra));
+
+ if (!dev) {
+ WL_ERROR(("%s: dev is null\n", __FUNCTION__));
+ return;
+ }
+
+ net_os_wake_lock(dev);
+
+ WL_TRACE(("%s: dev=%s event=%d \n", __FUNCTION__, dev->name, event_type));
+
+ switch (event_type) {
+
+ case WLC_E_RELOAD:
+ WL_ERROR(("%s: Firmware ERROR %d\n", __FUNCTION__, status));
+ net_os_send_hang_message(dev);
+ goto wl_iw_event_end;
+
+#if defined(SOFTAP)
+ case WLC_E_PRUNE:
+ if (ap_cfg_running) {
+ char *macaddr = (char *)&e->addr;
+ WL_SOFTAP(("PRUNE received, %02X:%02X:%02X:%02X:%02X:%02X!\n",
+ macaddr[0], macaddr[1], macaddr[2], macaddr[3], \
+ macaddr[4], macaddr[5]));
+
+ if (ap_macmode) {
+ int i;
+ for (i = 0; i < ap_black_list.count; i++) {
+ if (!bcmp(macaddr, &ap_black_list.ea[i], \
+ sizeof(struct ether_addr))) {
+ WL_SOFTAP(("mac in black list, ignore it\n"));
+ break;
+ }
+ }
+
+ if (i == ap_black_list.count) {
+ char mac_buf[32] = {0};
+ sprintf(mac_buf, "STA_BLOCK %02X:%02X:%02X:%02X:%02X:%02X",
+ macaddr[0], macaddr[1], macaddr[2],
+ macaddr[3], macaddr[4], macaddr[5]);
+ wl_iw_send_priv_event(priv_dev, mac_buf);
+ }
+ }
+ }
+ break;
+#endif
+ case WLC_E_TXFAIL:
+ cmd = IWEVTXDROP;
+ memcpy(wrqu.addr.sa_data, &e->addr, ETHER_ADDR_LEN);
+ wrqu.addr.sa_family = ARPHRD_ETHER;
+ break;
+#if WIRELESS_EXT > 14
+ case WLC_E_JOIN:
+ case WLC_E_ASSOC_IND:
+ case WLC_E_REASSOC_IND:
+#if defined(SOFTAP)
+ WL_SOFTAP(("STA connect received %d\n", event_type));
+ if (ap_cfg_running) {
+ wl_iw_send_priv_event(priv_dev, "STA_JOIN");
+ goto wl_iw_event_end;
+ }
+#endif
+ memcpy(wrqu.addr.sa_data, &e->addr, ETHER_ADDR_LEN);
+ wrqu.addr.sa_family = ARPHRD_ETHER;
+ cmd = IWEVREGISTERED;
+ break;
+ case WLC_E_ROAM:
+ if (status == WLC_E_STATUS_SUCCESS) {
+ memcpy(wrqu.addr.sa_data, &e->addr.octet, ETHER_ADDR_LEN);
+ wrqu.addr.sa_family = ARPHRD_ETHER;
+ cmd = SIOCGIWAP;
+ }
+ else if (status == WLC_E_STATUS_NO_NETWORKS) {
+ roam_no_success++;
+ if ((roam_no_success == 5) && (roam_no_success_send == FALSE)) {
+ roam_no_success_send = TRUE;
+ bzero(wrqu.addr.sa_data, ETHER_ADDR_LEN);
+ bzero(&extra, ETHER_ADDR_LEN);
+ cmd = SIOCGIWAP;
+ WL_ERROR(("%s ROAMING did not succeeded , send Link Down\n", \
+ __FUNCTION__));
+ } else {
+ WL_TRACE(("##### ROAMING did not succeeded %d\n", roam_no_success));
+ goto wl_iw_event_end;
+ }
+ }
+ break;
+ case WLC_E_DEAUTH_IND:
+ case WLC_E_DISASSOC_IND:
+#if defined(SOFTAP)
+ WL_SOFTAP(("STA disconnect received %d\n", event_type));
+ if (ap_cfg_running) {
+ wl_iw_send_priv_event(priv_dev, "STA_LEAVE");
+ goto wl_iw_event_end;
+ }
+#endif
+ cmd = SIOCGIWAP;
+ bzero(wrqu.addr.sa_data, ETHER_ADDR_LEN);
+ wrqu.addr.sa_family = ARPHRD_ETHER;
+ bzero(&extra, ETHER_ADDR_LEN);
+ break;
+ case WLC_E_LINK:
+ case WLC_E_NDIS_LINK:
+ cmd = SIOCGIWAP;
+ if (!(flags & WLC_EVENT_MSG_LINK)) {
+#ifdef SOFTAP
+#ifdef AP_ONLY
+ if (ap_cfg_running) {
+#else
+ if (ap_cfg_running && !strncmp(dev->name, "wl0.1", 5)) {
+#endif
+ WL_SOFTAP(("AP DOWN %d\n", event_type));
+ wl_iw_send_priv_event(priv_dev, "AP_DOWN");
+ } else {
+ WL_TRACE(("STA_Link Down\n"));
+ g_ss_cache_ctrl.m_link_down = 1;
+ }
+#else
+ g_ss_cache_ctrl.m_link_down = 1;
+#endif
+ WL_TRACE(("Link Down\n"));
+
+ bzero(wrqu.addr.sa_data, ETHER_ADDR_LEN);
+ bzero(&extra, ETHER_ADDR_LEN);
+ }
+ else {
+ memcpy(wrqu.addr.sa_data, &e->addr, ETHER_ADDR_LEN);
+ g_ss_cache_ctrl.m_link_down = 0;
+
+ memcpy(g_ss_cache_ctrl.m_active_bssid, &e->addr, ETHER_ADDR_LEN);
+
+#ifdef SOFTAP
+#ifdef AP_ONLY
+ if (ap_cfg_running) {
+#else
+ if (ap_cfg_running && !strncmp(dev->name, "wl0.1", 5)) {
+#endif
+ WL_SOFTAP(("AP UP %d\n", event_type));
+ wl_iw_send_priv_event(priv_dev, "AP_UP");
+ } else {
+ WL_TRACE(("STA_LINK_UP\n"));
+ roam_no_success_send = FALSE;
+ roam_no_success = 0;
+ }
+#endif
+ WL_TRACE(("Link UP\n"));
+
+ }
+ net_os_wake_lock_timeout_enable(dev);
+ wrqu.addr.sa_family = ARPHRD_ETHER;
+ break;
+ case WLC_E_ACTION_FRAME:
+ cmd = IWEVCUSTOM;
+ if (datalen + 1 <= sizeof(extra)) {
+ wrqu.data.length = datalen + 1;
+ extra[0] = WLC_E_ACTION_FRAME;
+ memcpy(&extra[1], data, datalen);
+ WL_TRACE(("WLC_E_ACTION_FRAME len %d \n", wrqu.data.length));
+ }
+ break;
+
+ case WLC_E_ACTION_FRAME_COMPLETE:
+ cmd = IWEVCUSTOM;
+ memcpy(&toto, data, 4);
+ if (sizeof(status) + 1 <= sizeof(extra)) {
+ wrqu.data.length = sizeof(status) + 1;
+ extra[0] = WLC_E_ACTION_FRAME_COMPLETE;
+ memcpy(&extra[1], &status, sizeof(status));
+ printf("wl_iw_event status %d PacketId %d \n", status, toto);
+ printf("WLC_E_ACTION_FRAME_COMPLETE len %d \n", wrqu.data.length);
+ }
+ break;
+#endif
+#if WIRELESS_EXT > 17
+ case WLC_E_MIC_ERROR: {
+ struct iw_michaelmicfailure *micerrevt = (struct iw_michaelmicfailure *)&extra;
+ cmd = IWEVMICHAELMICFAILURE;
+ wrqu.data.length = sizeof(struct iw_michaelmicfailure);
+ if (flags & WLC_EVENT_MSG_GROUP)
+ micerrevt->flags |= IW_MICFAILURE_GROUP;
+ else
+ micerrevt->flags |= IW_MICFAILURE_PAIRWISE;
+ memcpy(micerrevt->src_addr.sa_data, &e->addr, ETHER_ADDR_LEN);
+ micerrevt->src_addr.sa_family = ARPHRD_ETHER;
+
+ break;
+ }
+#ifdef BCMWPA2
+ case WLC_E_PMKID_CACHE: {
+ if (data)
+ {
+ struct iw_pmkid_cand *iwpmkidcand = (struct iw_pmkid_cand *)&extra;
+ pmkid_cand_list_t *pmkcandlist;
+ pmkid_cand_t *pmkidcand;
+ int count;
+
+ cmd = IWEVPMKIDCAND;
+ pmkcandlist = data;
+ count = ntoh32_ua((uint8 *)&pmkcandlist->npmkid_cand);
+ ASSERT(count >= 0);
+ wrqu.data.length = sizeof(struct iw_pmkid_cand);
+ pmkidcand = pmkcandlist->pmkid_cand;
+ while (count) {
+ bzero(iwpmkidcand, sizeof(struct iw_pmkid_cand));
+ if (pmkidcand->preauth)
+ iwpmkidcand->flags |= IW_PMKID_CAND_PREAUTH;
+ bcopy(&pmkidcand->BSSID, &iwpmkidcand->bssid.sa_data,
+ ETHER_ADDR_LEN);
+#ifndef SANDGATE2G
+ wireless_send_event(dev, cmd, &wrqu, extra);
+#endif
+ pmkidcand++;
+ count--;
+ }
+ }
+ goto wl_iw_event_end;
+ }
+#endif
+#endif
+
+ case WLC_E_SCAN_COMPLETE:
+#if defined(WL_IW_USE_ISCAN)
+ if ((g_iscan) && (g_iscan->sysioc_pid >= 0) &&
+ (g_iscan->iscan_state != ISCAN_STATE_IDLE))
+ {
+ up(&g_iscan->sysioc_sem);
+ } else {
+ cmd = SIOCGIWSCAN;
+ wrqu.data.length = strlen(extra);
+ WL_TRACE(("Event WLC_E_SCAN_COMPLETE from specific scan %d\n", \
+ g_iscan->iscan_state));
+ }
+#else
+ cmd = SIOCGIWSCAN;
+ wrqu.data.length = strlen(extra);
+ WL_TRACE(("Event WLC_E_SCAN_COMPLETE\n"));
+#endif
+ break;
+
+ case WLC_E_PFN_NET_FOUND:
+ {
+ wlc_ssid_t * ssid;
+ ssid = (wlc_ssid_t *)data;
+ WL_TRACE(("%s Event WLC_E_PFN_NET_FOUND, send %s up : find %s len=%d\n", \
+ __FUNCTION__, PNO_EVENT_UP, ssid->SSID, ssid->SSID_len));
+ net_os_wake_lock_timeout_enable(dev);
+ cmd = IWEVCUSTOM;
+ memset(&wrqu, 0, sizeof(wrqu));
+ strcpy(extra, PNO_EVENT_UP);
+ wrqu.data.length = strlen(extra);
+ }
+ break;
+
+ default:
+
+ WL_TRACE(("Unknown Event %d: ignoring\n", event_type));
+ break;
+ }
+#ifndef SANDGATE2G
+ if (cmd) {
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 31))
+ if (cmd == SIOCGIWSCAN)
+ wireless_send_event(dev, cmd, &wrqu, NULL);
+ else
+#endif
+ wireless_send_event(dev, cmd, &wrqu, extra);
+ }
+#endif
+
+#if WIRELESS_EXT > 14
+
+ memset(extra, 0, sizeof(extra));
+ if (wl_iw_check_conn_fail(e, extra, sizeof(extra))) {
+ cmd = IWEVCUSTOM;
+ wrqu.data.length = strlen(extra);
+#ifndef SANDGATE2G
+ wireless_send_event(dev, cmd, &wrqu, extra);
+#endif
+ }
+#endif
+wl_iw_event_end:
+ net_os_wake_unlock(dev);
+#endif
+}
+
+int wl_iw_get_wireless_stats(struct net_device *dev, struct iw_statistics *wstats)
+{
+ int res = 0;
+ wl_cnt_t cnt;
+ int phy_noise;
+ int rssi;
+ scb_val_t scb_val;
+
+ phy_noise = 0;
+ if ((res = dev_wlc_ioctl(dev, WLC_GET_PHY_NOISE, &phy_noise, sizeof(phy_noise))))
+ goto done;
+
+ phy_noise = dtoh32(phy_noise);
+ WL_TRACE(("wl_iw_get_wireless_stats phy noise=%d\n", phy_noise));
+
+ bzero(&scb_val, sizeof(scb_val_t));
+ if ((res = dev_wlc_ioctl(dev, WLC_GET_RSSI, &scb_val, sizeof(scb_val_t))))
+ goto done;
+
+ rssi = dtoh32(scb_val.val);
+ WL_TRACE(("wl_iw_get_wireless_stats rssi=%d\n", rssi));
+ if (rssi <= WL_IW_RSSI_NO_SIGNAL)
+ wstats->qual.qual = 0;
+ else if (rssi <= WL_IW_RSSI_VERY_LOW)
+ wstats->qual.qual = 1;
+ else if (rssi <= WL_IW_RSSI_LOW)
+ wstats->qual.qual = 2;
+ else if (rssi <= WL_IW_RSSI_GOOD)
+ wstats->qual.qual = 3;
+ else if (rssi <= WL_IW_RSSI_VERY_GOOD)
+ wstats->qual.qual = 4;
+ else
+ wstats->qual.qual = 5;
+
+
+ wstats->qual.level = 0x100 + rssi;
+ wstats->qual.noise = 0x100 + phy_noise;
+#if WIRELESS_EXT > 18
+ wstats->qual.updated |= (IW_QUAL_ALL_UPDATED | IW_QUAL_DBM);
+#else
+ wstats->qual.updated |= 7;
+#endif
+
+#if WIRELESS_EXT > 11
+ WL_TRACE(("wl_iw_get_wireless_stats counters=%d\n", (int)sizeof(wl_cnt_t)));
+
+ memset(&cnt, 0, sizeof(wl_cnt_t));
+ res = dev_wlc_bufvar_get(dev, "counters", (char *)&cnt, sizeof(wl_cnt_t));
+ if (res)
+ {
+ WL_ERROR(("wl_iw_get_wireless_stats counters failed error=%d\n", res));
+ goto done;
+ }
+
+ cnt.version = dtoh16(cnt.version);
+ if (cnt.version != WL_CNT_T_VERSION) {
+ WL_TRACE(("\tIncorrect version of counters struct: expected %d; got %d\n",
+ WL_CNT_T_VERSION, cnt.version));
+ goto done;
+ }
+
+ wstats->discard.nwid = 0;
+ wstats->discard.code = dtoh32(cnt.rxundec);
+ wstats->discard.fragment = dtoh32(cnt.rxfragerr);
+ wstats->discard.retries = dtoh32(cnt.txfail);
+ wstats->discard.misc = dtoh32(cnt.rxrunt) + dtoh32(cnt.rxgiant);
+ wstats->miss.beacon = 0;
+
+ WL_TRACE(("wl_iw_get_wireless_stats counters txframe=%d txbyte=%d\n",
+ dtoh32(cnt.txframe), dtoh32(cnt.txbyte)));
+ WL_TRACE(("wl_iw_get_wireless_stats counters rxfrmtoolong=%d\n", dtoh32(cnt.rxfrmtoolong)));
+ WL_TRACE(("wl_iw_get_wireless_stats counters rxbadplcp=%d\n", dtoh32(cnt.rxbadplcp)));
+ WL_TRACE(("wl_iw_get_wireless_stats counters rxundec=%d\n", dtoh32(cnt.rxundec)));
+ WL_TRACE(("wl_iw_get_wireless_stats counters rxfragerr=%d\n", dtoh32(cnt.rxfragerr)));
+ WL_TRACE(("wl_iw_get_wireless_stats counters txfail=%d\n", dtoh32(cnt.txfail)));
+ WL_TRACE(("wl_iw_get_wireless_stats counters rxrunt=%d\n", dtoh32(cnt.rxrunt)));
+ WL_TRACE(("wl_iw_get_wireless_stats counters rxgiant=%d\n", dtoh32(cnt.rxgiant)));
+
+#endif
+
+done:
+ return res;
+}
+static void
+wl_iw_bt_flag_set(
+ struct net_device *dev,
+ bool set)
+{
+#if defined(BT_DHCP_USE_FLAGS)
+ char buf_flag7_dhcp_on[8] = { 7, 00, 00, 00, 0x1, 0x0, 0x00, 0x00 };
+ char buf_flag7_default[8] = { 7, 00, 00, 00, 0x0, 0x00, 0x00, 0x00};
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ rtnl_lock();
+#endif
+
+#if defined(BT_DHCP_eSCO_FIX)
+ set_btc_esco_params(dev, set);
+#endif
+
+#if defined(BT_DHCP_USE_FLAGS)
+ WL_TRACE_COEX(("WI-FI priority boost via bt flags, set:%d\n", set));
+ if (set == TRUE) {
+ dev_wlc_bufvar_set(dev, "btc_flags",
+ (char *)&buf_flag7_dhcp_on[0], sizeof(buf_flag7_dhcp_on));
+ }
+ else {
+ dev_wlc_bufvar_set(dev, "btc_flags",
+ (char *)&buf_flag7_default[0], sizeof(buf_flag7_default));
+ }
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27))
+ rtnl_unlock();
+#endif
+}
+
+static void
+wl_iw_bt_timerfunc(ulong data)
+{
+ bt_info_t *bt_local = (bt_info_t *)data;
+ bt_local->timer_on = 0;
+ WL_TRACE(("%s\n", __FUNCTION__));
+
+ up(&bt_local->bt_sem);
+}
+
+static int
+_bt_dhcp_sysioc_thread(void *data)
+{
+ DAEMONIZE("dhcp_sysioc");
+
+ while (down_interruptible(&g_bt->bt_sem) == 0) {
+
+ net_os_wake_lock(g_bt->dev);
+
+ if (g_bt->timer_on) {
+ g_bt->timer_on = 0;
+ del_timer_sync(&g_bt->timer);
+ }
+
+ switch (g_bt->bt_state) {
+ case BT_DHCP_START:
+ WL_TRACE_COEX(("%s bt_dhcp stm: started \n", __FUNCTION__));
+ g_bt->bt_state = BT_DHCP_OPPORTUNITY_WINDOW;
+ mod_timer(&g_bt->timer, jiffies + BT_DHCP_OPPORTUNITY_WINDOW_TIME*HZ/1000);
+ g_bt->timer_on = 1;
+ break;
+
+ case BT_DHCP_OPPORTUNITY_WINDOW:
+ if (g_bt->dhcp_done) {
+ WL_TRACE_COEX(("%s DHCP Done before T1 expiration\n", \
+ __FUNCTION__));
+ g_bt->bt_state = BT_DHCP_IDLE;
+ g_bt->timer_on = 0;
+ break;
+ }
+
+ WL_TRACE_COEX(("%s DHCP T1:%d expired\n", \
+ __FUNCTION__, BT_DHCP_OPPORTUNITY_WINDOW_TIME));
+ if (g_bt->dev) wl_iw_bt_flag_set(g_bt->dev, TRUE);
+ g_bt->bt_state = BT_DHCP_FLAG_FORCE_TIMEOUT;
+ mod_timer(&g_bt->timer, jiffies + BT_DHCP_FLAG_FORCE_TIME*HZ/1000);
+ g_bt->timer_on = 1;
+ break;
+
+ case BT_DHCP_FLAG_FORCE_TIMEOUT:
+ if (g_bt->dhcp_done) {
+ WL_TRACE_COEX(("%s DHCP Done before T2 expiration\n", \
+ __FUNCTION__));
+ } else {
+ WL_TRACE_COEX(("%s DHCP wait interval T2:%d msec expired\n",
+ __FUNCTION__, BT_DHCP_FLAG_FORCE_TIME));
+ }
+
+ if (g_bt->dev) wl_iw_bt_flag_set(g_bt->dev, FALSE);
+ g_bt->bt_state = BT_DHCP_IDLE;
+ g_bt->timer_on = 0;
+ break;
+
+ default:
+ WL_ERROR(("%s error g_status=%d !!!\n", __FUNCTION__, \
+ g_bt->bt_state));
+ if (g_bt->dev) wl_iw_bt_flag_set(g_bt->dev, FALSE);
+ g_bt->bt_state = BT_DHCP_IDLE;
+ g_bt->timer_on = 0;
+ break;
+ }
+
+ net_os_wake_unlock(g_bt->dev);
+ }
+
+ if (g_bt->timer_on) {
+ g_bt->timer_on = 0;
+ del_timer_sync(&g_bt->timer);
+ }
+
+ complete_and_exit(&g_bt->bt_exited, 0);
+}
+
+static void
+wl_iw_bt_release(void)
+{
+ bt_info_t *bt_local = g_bt;
+
+ if (!bt_local) {
+ return;
+ }
+
+ if (bt_local->bt_pid >= 0) {
+ KILL_PROC(bt_local->bt_pid, SIGTERM);
+ wait_for_completion(&bt_local->bt_exited);
+ }
+ kfree(bt_local);
+ g_bt = NULL;
+}
+
+static int
+wl_iw_bt_init(struct net_device *dev)
+{
+ bt_info_t *bt_dhcp = NULL;
+
+ bt_dhcp = kmalloc(sizeof(bt_info_t), GFP_KERNEL);
+ if (!bt_dhcp)
+ return -ENOMEM;
+
+ memset(bt_dhcp, 0, sizeof(bt_info_t));
+ bt_dhcp->bt_pid = -1;
+ g_bt = bt_dhcp;
+ bt_dhcp->dev = dev;
+ bt_dhcp->bt_state = BT_DHCP_IDLE;
+
+
+ bt_dhcp->timer_ms = 10;
+ init_timer(&bt_dhcp->timer);
+ bt_dhcp->timer.data = (ulong)bt_dhcp;
+ bt_dhcp->timer.function = wl_iw_bt_timerfunc;
+
+ sema_init(&bt_dhcp->bt_sem, 0);
+ init_completion(&bt_dhcp->bt_exited);
+ bt_dhcp->bt_pid = kernel_thread(_bt_dhcp_sysioc_thread, bt_dhcp, 0);
+ if (bt_dhcp->bt_pid < 0) {
+ WL_ERROR(("Failed in %s\n", __FUNCTION__));
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+int wl_iw_attach(struct net_device *dev, void *dhdp)
+{
+ int params_size;
+ wl_iw_t *iw;
+#if defined(WL_IW_USE_ISCAN)
+ iscan_info_t *iscan = NULL;
+#endif
+
+ mutex_init(&wl_cache_lock);
+
+#if defined(WL_IW_USE_ISCAN)
+ if (!dev)
+ return 0;
+
+ memset(&g_wl_iw_params, 0, sizeof(wl_iw_extra_params_t));
+
+#ifdef CSCAN
+ params_size = (WL_SCAN_PARAMS_FIXED_SIZE + OFFSETOF(wl_iscan_params_t, params)) +
+ (WL_NUMCHANNELS * sizeof(uint16)) + WL_SCAN_PARAMS_SSID_MAX * sizeof(wlc_ssid_t);
+#else
+ params_size = (WL_SCAN_PARAMS_FIXED_SIZE + OFFSETOF(wl_iscan_params_t, params));
+#endif
+ iscan = kmalloc(sizeof(iscan_info_t), GFP_KERNEL);
+ if (!iscan)
+ return -ENOMEM;
+ memset(iscan, 0, sizeof(iscan_info_t));
+
+ iscan->iscan_ex_params_p = (wl_iscan_params_t*)kmalloc(params_size, GFP_KERNEL);
+ if (!iscan->iscan_ex_params_p)
+ return -ENOMEM;
+ iscan->iscan_ex_param_size = params_size;
+ iscan->sysioc_pid = -1;
+
+ g_iscan = iscan;
+ iscan->dev = dev;
+ iscan->iscan_state = ISCAN_STATE_IDLE;
+#if defined(CONFIG_FIRST_SCAN)
+ g_first_broadcast_scan = BROADCAST_SCAN_FIRST_IDLE;
+ g_first_counter_scans = 0;
+ g_iscan->scan_flag = 0;
+#endif
+
+ iscan->timer_ms = 8000;
+ init_timer(&iscan->timer);
+ iscan->timer.data = (ulong)iscan;
+ iscan->timer.function = wl_iw_timerfunc;
+
+ sema_init(&iscan->sysioc_sem, 0);
+ init_completion(&iscan->sysioc_exited);
+ iscan->sysioc_pid = kernel_thread(_iscan_sysioc_thread, iscan, 0);
+ if (iscan->sysioc_pid < 0)
+ return -ENOMEM;
+#endif
+
+ iw = *(wl_iw_t **)netdev_priv(dev);
+ iw->pub = (dhd_pub_t *)dhdp;
+#ifdef SOFTAP
+ priv_dev = dev;
+#endif
+ g_scan = NULL;
+
+ g_scan = (void *)kmalloc(G_SCAN_RESULTS, GFP_KERNEL);
+ if (!g_scan)
+ return -ENOMEM;
+
+ memset(g_scan, 0, G_SCAN_RESULTS);
+ g_scan_specified_ssid = 0;
+
+#if !defined(CSCAN)
+ wl_iw_init_ss_cache_ctrl();
+#endif
+
+ wl_iw_bt_init(dev);
+
+ return 0;
+}
+
+void wl_iw_detach(void)
+{
+#if defined(WL_IW_USE_ISCAN)
+ iscan_buf_t *buf;
+ iscan_info_t *iscan = g_iscan;
+
+ if (!iscan)
+ return;
+ if (iscan->sysioc_pid >= 0) {
+ KILL_PROC(iscan->sysioc_pid, SIGTERM);
+ wait_for_completion(&iscan->sysioc_exited);
+ }
+ mutex_lock(&wl_cache_lock);
+ while (iscan->list_hdr) {
+ buf = iscan->list_hdr->next;
+ kfree(iscan->list_hdr);
+ iscan->list_hdr = buf;
+ }
+ kfree(iscan->iscan_ex_params_p);
+ kfree(iscan);
+ g_iscan = NULL;
+ mutex_unlock(&wl_cache_lock);
+#endif
+
+ if (g_scan)
+ kfree(g_scan);
+
+ g_scan = NULL;
+#if !defined(CSCAN)
+ wl_iw_release_ss_cache_ctrl();
+#endif
+ wl_iw_bt_release();
+#ifdef SOFTAP
+ if (ap_cfg_running) {
+ WL_TRACE(("\n%s AP is going down\n", __FUNCTION__));
+ wl_iw_send_priv_event(priv_dev, "AP_DOWN");
+ }
+#endif
+}
diff --git a/drivers/net/wireless/bcm4329/wl_iw.h b/drivers/net/wireless/bcm4329/wl_iw.h
new file mode 100644
index 0000000..928291f
--- /dev/null
+++ b/drivers/net/wireless/bcm4329/wl_iw.h
@@ -0,0 +1,284 @@
+/*
+ * Linux Wireless Extensions support
+ *
+ * Copyright (C) 1999-2010, Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2 (the "GPL"),
+ * available at http://www.broadcom.com/licenses/GPLv2.php, with the
+ * following added to such license:
+ *
+ * As a special exception, the copyright holders of this software give you
+ * permission to link this software with independent modules, and to copy and
+ * distribute the resulting executable under terms of your choice, provided that
+ * you also meet, for each linked independent module, the terms and conditions of
+ * the license of that module. An independent module is a module which is not
+ * derived from this software. The special exception does not apply to any
+ * modifications of the software.
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a license
+ * other than the GPL, without Broadcom's express prior written consent.
+ *
+ * $Id: wl_iw.h,v 1.5.34.1.6.36.4.15 2010/11/17 03:13:51 Exp $
+ */
+
+
+#ifndef _wl_iw_h_
+#define _wl_iw_h_
+
+#include <linux/wireless.h>
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+#include <wlioctl.h>
+
+#define WL_SCAN_PARAMS_SSID_MAX 10
+#define GET_SSID "SSID="
+#define GET_CHANNEL "CH="
+#define GET_NPROBE "NPROBE="
+#define GET_ACTIVE_ASSOC_DWELL "ACTIVE="
+#define GET_PASSIVE_ASSOC_DWELL "PASSIVE="
+#define GET_HOME_DWELL "HOME="
+#define GET_SCAN_TYPE "TYPE="
+
+#define BAND_GET_CMD "GETBAND"
+#define BAND_SET_CMD "SETBAND"
+#define DTIM_SKIP_GET_CMD "DTIMSKIPGET"
+#define DTIM_SKIP_SET_CMD "DTIMSKIPSET"
+#define SETSUSPEND_CMD "SETSUSPENDOPT"
+#define PNOSSIDCLR_SET_CMD "PNOSSIDCLR"
+#define PNOSETUP_SET_CMD "PNOSETUP "
+#define PNOENABLE_SET_CMD "PNOFORCE"
+#define PNODEBUG_SET_CMD "PNODEBUG"
+#define SETDFSCHANNELS_CMD "SETDFSCHANNELS"
+
+#define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]
+#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
+
+
+typedef struct wl_iw_extra_params {
+ int target_channel;
+} wl_iw_extra_params_t;
+
+#define WL_IW_RSSI_MINVAL -200
+#define WL_IW_RSSI_NO_SIGNAL -91
+#define WL_IW_RSSI_VERY_LOW -80
+#define WL_IW_RSSI_LOW -70
+#define WL_IW_RSSI_GOOD -68
+#define WL_IW_RSSI_VERY_GOOD -58
+#define WL_IW_RSSI_EXCELLENT -57
+#define WL_IW_RSSI_INVALID 0
+#define MAX_WX_STRING 80
+#define isprint(c) bcm_isprint(c)
+#define WL_IW_SET_ACTIVE_SCAN (SIOCIWFIRSTPRIV+1)
+#define WL_IW_GET_RSSI (SIOCIWFIRSTPRIV+3)
+#define WL_IW_SET_PASSIVE_SCAN (SIOCIWFIRSTPRIV+5)
+#define WL_IW_GET_LINK_SPEED (SIOCIWFIRSTPRIV+7)
+#define WL_IW_GET_CURR_MACADDR (SIOCIWFIRSTPRIV+9)
+#define WL_IW_SET_STOP (SIOCIWFIRSTPRIV+11)
+#define WL_IW_SET_START (SIOCIWFIRSTPRIV+13)
+
+
+#define WL_SET_AP_CFG (SIOCIWFIRSTPRIV+15)
+#define WL_AP_STA_LIST (SIOCIWFIRSTPRIV+17)
+#define WL_AP_MAC_FLTR (SIOCIWFIRSTPRIV+19)
+#define WL_AP_BSS_START (SIOCIWFIRSTPRIV+21)
+#define AP_LPB_CMD (SIOCIWFIRSTPRIV+23)
+#define WL_AP_STOP (SIOCIWFIRSTPRIV+25)
+#define WL_FW_RELOAD (SIOCIWFIRSTPRIV+27)
+#define WL_AP_STA_DISASSOC (SIOCIWFIRSTPRIV+29)
+#define WL_COMBO_SCAN (SIOCIWFIRSTPRIV+31)
+
+#define G_SCAN_RESULTS (8*1024)
+#define WE_ADD_EVENT_FIX 0x80
+#define G_WLAN_SET_ON 0
+#define G_WLAN_SET_OFF 1
+
+#define CHECK_EXTRA_FOR_NULL(extra) \
+if (!extra) { \
+ WL_ERROR(("%s: error : extra is null pointer\n", __FUNCTION__)); \
+ return -EINVAL; \
+}
+
+typedef struct wl_iw {
+ char nickname[IW_ESSID_MAX_SIZE];
+
+ struct iw_statistics wstats;
+
+ int spy_num;
+ uint32 pwsec;
+ uint32 gwsec;
+ bool privacy_invoked;
+
+ struct ether_addr spy_addr[IW_MAX_SPY];
+ struct iw_quality spy_qual[IW_MAX_SPY];
+ void *wlinfo;
+ dhd_pub_t * pub;
+} wl_iw_t;
+
+#define WLC_IW_SS_CACHE_MAXLEN 2048
+#define WLC_IW_SS_CACHE_CTRL_FIELD_MAXLEN 32
+#define WLC_IW_BSS_INFO_MAXLEN \
+ (WLC_IW_SS_CACHE_MAXLEN - WLC_IW_SS_CACHE_CTRL_FIELD_MAXLEN)
+
+typedef struct wl_iw_ss_cache {
+ struct wl_iw_ss_cache *next;
+ int dirty;
+ uint32 buflen;
+ uint32 version;
+ uint32 count;
+ wl_bss_info_t bss_info[1];
+} wl_iw_ss_cache_t;
+
+typedef struct wl_iw_ss_cache_ctrl {
+ wl_iw_ss_cache_t *m_cache_head;
+ int m_link_down;
+ int m_timer_expired;
+ char m_active_bssid[ETHER_ADDR_LEN];
+ uint m_prev_scan_mode;
+ uint m_cons_br_scan_cnt;
+ struct timer_list *m_timer;
+} wl_iw_ss_cache_ctrl_t;
+
+typedef enum broadcast_first_scan {
+ BROADCAST_SCAN_FIRST_IDLE = 0,
+ BROADCAST_SCAN_FIRST_STARTED,
+ BROADCAST_SCAN_FIRST_RESULT_READY,
+ BROADCAST_SCAN_FIRST_RESULT_CONSUMED
+} broadcast_first_scan_t;
+#ifdef SOFTAP
+#define SSID_LEN 33
+#define SEC_LEN 16
+#define KEY_LEN 65
+#define PROFILE_OFFSET 32
+struct ap_profile {
+ uint8 ssid[SSID_LEN];
+ uint8 sec[SEC_LEN];
+ uint8 key[KEY_LEN];
+ uint32 channel;
+ uint32 preamble;
+ uint32 max_scb;
+ uint32 closednet;
+ char country_code[WLC_CNTRY_BUF_SZ];
+};
+
+
+#define MACLIST_MODE_DISABLED 0
+#define MACLIST_MODE_DENY 1
+#define MACLIST_MODE_ALLOW 2
+struct mflist {
+ uint count;
+ struct ether_addr ea[16];
+};
+
+struct mac_list_set {
+ uint32 mode;
+ struct mflist mac_list;
+};
+#endif
+
+#if WIRELESS_EXT > 12
+#include <net/iw_handler.h>
+extern const struct iw_handler_def wl_iw_handler_def;
+#endif
+
+extern int wl_iw_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+extern void wl_iw_event(struct net_device *dev, wl_event_msg_t *e, void* data);
+extern int wl_iw_get_wireless_stats(struct net_device *dev, struct iw_statistics *wstats);
+int wl_iw_attach(struct net_device *dev, void * dhdp);
+void wl_iw_detach(void);
+int wl_control_wl_start(struct net_device *dev);
+
+extern int net_os_wake_lock(struct net_device *dev);
+extern int net_os_wake_unlock(struct net_device *dev);
+extern int net_os_wake_lock_timeout(struct net_device *dev);
+extern int net_os_wake_lock_timeout_enable(struct net_device *dev);
+extern int net_os_set_suspend_disable(struct net_device *dev, int val);
+extern int net_os_set_suspend(struct net_device *dev, int val);
+extern int net_os_set_dtim_skip(struct net_device *dev, int val);
+extern int net_os_set_packet_filter(struct net_device *dev, int val);
+extern void dhd_bus_country_set(struct net_device *dev, char *country_code);
+extern char *dhd_bus_country_get(struct net_device *dev);
+extern int dhd_get_dtim_skip(dhd_pub_t *dhd);
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
+#define IWE_STREAM_ADD_EVENT(info, stream, ends, iwe, extra) \
+ iwe_stream_add_event(info, stream, ends, iwe, extra)
+#define IWE_STREAM_ADD_VALUE(info, event, value, ends, iwe, event_len) \
+ iwe_stream_add_value(info, event, value, ends, iwe, event_len)
+#define IWE_STREAM_ADD_POINT(info, stream, ends, iwe, extra) \
+ iwe_stream_add_point(info, stream, ends, iwe, extra)
+#else
+#define IWE_STREAM_ADD_EVENT(info, stream, ends, iwe, extra) \
+ iwe_stream_add_event(stream, ends, iwe, extra)
+#define IWE_STREAM_ADD_VALUE(info, event, value, ends, iwe, event_len) \
+ iwe_stream_add_value(event, value, ends, iwe, event_len)
+#define IWE_STREAM_ADD_POINT(info, stream, ends, iwe, extra) \
+ iwe_stream_add_point(stream, ends, iwe, extra)
+#endif
+
+extern int dhd_pno_enable(dhd_pub_t *dhd, int pfn_enabled);
+extern int dhd_pno_clean(dhd_pub_t *dhd);
+extern int dhd_pno_set(dhd_pub_t *dhd, wlc_ssid_t* ssids_local, int nssid, ushort scan_fr);
+extern int dhd_pno_get_status(dhd_pub_t *dhd);
+extern int dhd_dev_pno_reset(struct net_device *dev);
+extern int dhd_dev_pno_set(struct net_device *dev, wlc_ssid_t* ssids_local, \
+ int nssid, ushort scan_fr);
+extern int dhd_dev_pno_enable(struct net_device *dev, int pfn_enabled);
+extern int dhd_dev_get_pno_status(struct net_device *dev);
+
+#define PNO_TLV_PREFIX 'S'
+#define PNO_TLV_VERSION '1'
+#define PNO_TLV_SUBVERSION '2'
+#define PNO_TLV_RESERVED '0'
+#define PNO_TLV_TYPE_SSID_IE 'S'
+#define PNO_TLV_TYPE_TIME 'T'
+#define PNO_EVENT_UP "PNO_EVENT"
+#define PNO_SCAN_MAX_FW 508
+
+typedef struct cmd_tlv {
+ char prefix;
+ char version;
+ char subver;
+ char reserved;
+} cmd_tlv_t;
+
+#if defined(CSCAN)
+
+typedef struct cscan_tlv {
+ char prefix;
+ char version;
+ char subver;
+ char reserved;
+} cscan_tlv_t;
+
+#define CSCAN_COMMAND "CSCAN "
+#define CSCAN_TLV_PREFIX 'S'
+#define CSCAN_TLV_VERSION 1
+#define CSCAN_TLV_SUBVERSION 0
+#define CSCAN_TLV_TYPE_SSID_IE 'S'
+#define CSCAN_TLV_TYPE_CHANNEL_IE 'C'
+#define CSCAN_TLV_TYPE_NPROBE_IE 'N'
+#define CSCAN_TLV_TYPE_ACTIVE_IE 'A'
+#define CSCAN_TLV_TYPE_PASSIVE_IE 'P'
+#define CSCAN_TLV_TYPE_HOME_IE 'H'
+#define CSCAN_TLV_TYPE_STYPE_IE 'T'
+
+extern int wl_iw_parse_channel_list_tlv(char** list_str, uint16* channel_list, \
+ int channel_num, int *bytes_left);
+
+extern int wl_iw_parse_data_tlv(char** list_str, void *dst, int dst_size, \
+ const char token, int input_size, int *bytes_left);
+
+extern int wl_iw_parse_ssid_list_tlv(char** list_str, wlc_ssid_t* ssid, \
+ int max, int *bytes_left);
+
+extern int wl_iw_parse_ssid_list(char** list_str, wlc_ssid_t* ssid, int idx, int max);
+
+extern int wl_iw_parse_channel_list(char** list_str, uint16* channel_list, int channel_num);
+
+#endif
+
+#endif