ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive: To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero. At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller. This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.
With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.
This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter. As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index 598c22f..5de23c0 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -4288,7 +4288,7 @@
<![CDATA[
struct snd_rawmidi *rmidi;
snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, info_flags,
- irq, irq_flags, &rmidi);
+ irq, &rmidi);
]]>
</programlisting>
</informalexample>
@@ -4343,6 +4343,13 @@
by itself to start processing the output stream in the irq handler.
</para>
+ <para>
+ If the MPU-401 interface shares its interrupt with the other logical
+ devices on the card, set <constant>MPU401_INFO_IRQ_HOOK</constant>
+ (see <link linkend="midi-interface-interrupt-handler"><citetitle>
+ below</citetitle></link>).
+ </para>
+
<para>
Usually, the port address corresponds to the command port and
port + 1 corresponds to the data port. If not, you may change
@@ -4375,14 +4382,12 @@
</para>
<para>
- The 6th argument specifies the irq number for UART. If the irq
- is already allocated, pass 0 to the 7th argument
- (<parameter>irq_flags</parameter>). Otherwise, pass the flags
- for irq allocation
- (<constant>SA_XXX</constant> bits) to it, and the irq will be
- reserved by the mpu401-uart layer. If the card doesn't generate
- UART interrupts, pass -1 as the irq number. Then a timer
- interrupt will be invoked for polling.
+ The 6th argument specifies the ISA irq number that will be
+ allocated. If no interrupt is to be allocated (because your
+ code is already allocating a shared interrupt, or because the
+ device does not use interrupts), pass -1 instead.
+ For a MPU-401 device without an interrupt, a polling timer
+ will be used instead.
</para>
</section>
@@ -4390,12 +4395,13 @@
<title>Interrupt Handler</title>
<para>
When the interrupt is allocated in
- <function>snd_mpu401_uart_new()</function>, the private
- interrupt handler is used, hence you don't have anything else to do
- than creating the mpu401 stuff. Otherwise, you have to call
- <function>snd_mpu401_uart_interrupt()</function> explicitly when
- a UART interrupt is invoked and checked in your own interrupt
- handler.
+ <function>snd_mpu401_uart_new()</function>, an exclusive ISA
+ interrupt handler is automatically used, hence you don't have
+ anything else to do than creating the mpu401 stuff. Otherwise, you
+ have to set <constant>MPU401_INFO_IRQ_HOOK</constant>, and call
+ <function>snd_mpu401_uart_interrupt()</function> explicitly from your
+ own interrupt handler when it has determined that a UART interrupt
+ has occurred.
</para>
<para>
diff --git a/include/sound/mpu401.h b/include/sound/mpu401.h
index 1f1d53f..20230db 100644
--- a/include/sound/mpu401.h
+++ b/include/sound/mpu401.h
@@ -50,7 +50,10 @@
#define MPU401_INFO_INTEGRATED (1 << 2) /* integrated h/w port */
#define MPU401_INFO_MMIO (1 << 3) /* MMIO access */
#define MPU401_INFO_TX_IRQ (1 << 4) /* independent TX irq */
+#define MPU401_INFO_IRQ_HOOK (1 << 5) /* mpu401 irq handler is called
+ from driver irq handler */
#define MPU401_INFO_NO_ACK (1 << 6) /* No ACK cmd needed */
+#define MPU401_INFO_USE_TIMER (1 << 15) /* internal */
#define MPU401_MODE_BIT_INPUT 0
#define MPU401_MODE_BIT_OUTPUT 1
@@ -73,8 +76,7 @@
unsigned long port; /* base port of MPU-401 chip */
unsigned long cport; /* port + 1 (usually) */
struct resource *res; /* port resource */
- int irq; /* IRQ number of MPU-401 chip (-1 = poll) */
- int irq_flags;
+ int irq; /* IRQ number of MPU-401 chip */
unsigned long mode; /* MPU401_MODE_XXXX */
int timer_invoked;
@@ -131,7 +133,6 @@
unsigned long port,
unsigned int info_flags,
int irq,
- int irq_flags,
struct snd_rawmidi ** rrawmidi);
#endif /* __SOUND_MPU401_H */
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index 149d05a..1c02852 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -86,8 +86,7 @@
}
err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port[dev], 0,
- irq[dev], irq[dev] >= 0 ? IRQF_DISABLED : 0,
- NULL);
+ irq[dev], NULL);
if (err < 0) {
printk(KERN_ERR "MPU401 not detected at 0x%lx\n", port[dev]);
goto _err;
diff --git a/sound/drivers/mpu401/mpu401_uart.c b/sound/drivers/mpu401/mpu401_uart.c
index 2af0999..9d01c18 100644
--- a/sound/drivers/mpu401/mpu401_uart.c
+++ b/sound/drivers/mpu401/mpu401_uart.c
@@ -3,7 +3,7 @@
* Routines for control of MPU-401 in UART mode
*
* MPU-401 supports UART mode which is not capable generate transmit
- * interrupts thus output is done via polling. Also, if irq < 0, then
+ * interrupts thus output is done via polling. Without interrupt,
* input is done also via polling. Do not expect good performance.
*
*
@@ -374,7 +374,7 @@
/* first time - flush FIFO */
while (max-- > 0)
mpu->read(mpu, MPU401D(mpu));
- if (mpu->irq < 0)
+ if (mpu->info_flags & MPU401_INFO_USE_TIMER)
snd_mpu401_uart_add_timer(mpu, 1);
}
@@ -383,7 +383,7 @@
snd_mpu401_uart_input_read(mpu);
spin_unlock_irqrestore(&mpu->input_lock, flags);
} else {
- if (mpu->irq < 0)
+ if (mpu->info_flags & MPU401_INFO_USE_TIMER)
snd_mpu401_uart_remove_timer(mpu, 1);
clear_bit(MPU401_MODE_BIT_INPUT_TRIGGER, &mpu->mode);
}
@@ -496,7 +496,7 @@
static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi)
{
struct snd_mpu401 *mpu = rmidi->private_data;
- if (mpu->irq_flags && mpu->irq >= 0)
+ if (mpu->irq >= 0)
free_irq(mpu->irq, (void *) mpu);
release_and_free_resource(mpu->res);
kfree(mpu);
@@ -509,8 +509,7 @@
* @hardware: the hardware type, MPU401_HW_XXXX
* @port: the base address of MPU401 port
* @info_flags: bitflags MPU401_INFO_XXX
- * @irq: the irq number, -1 if no interrupt for mpu
- * @irq_flags: the irq request flags (SA_XXX), 0 if irq was already reserved.
+ * @irq: the ISA irq number, -1 if not to be allocated
* @rrawmidi: the pointer to store the new rawmidi instance
*
* Creates a new MPU-401 instance.
@@ -525,7 +524,7 @@
unsigned short hardware,
unsigned long port,
unsigned int info_flags,
- int irq, int irq_flags,
+ int irq,
struct snd_rawmidi ** rrawmidi)
{
struct snd_mpu401 *mpu;
@@ -577,8 +576,8 @@
mpu->cport = port + 2;
else
mpu->cport = port + 1;
- if (irq >= 0 && irq_flags) {
- if (request_irq(irq, snd_mpu401_uart_interrupt, irq_flags,
+ if (irq >= 0) {
+ if (request_irq(irq, snd_mpu401_uart_interrupt, IRQF_DISABLED,
"MPU401 UART", (void *) mpu)) {
snd_printk(KERN_ERR "mpu401_uart: "
"unable to grab IRQ %d\n", irq);
@@ -586,9 +585,10 @@
return -EBUSY;
}
}
+ if (irq < 0 && !(info_flags & MPU401_INFO_IRQ_HOOK))
+ info_flags |= MPU401_INFO_USE_TIMER;
mpu->info_flags = info_flags;
mpu->irq = irq;
- mpu->irq_flags = irq_flags;
if (card->shortname[0])
snprintf(rmidi->name, sizeof(rmidi->name), "%s MIDI",
card->shortname);
diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c
index 3cb75bc..a87a2b56 100644
--- a/sound/isa/ad1816a/ad1816a.c
+++ b/sound/isa/ad1816a/ad1816a.c
@@ -204,7 +204,7 @@
if (mpu_port[dev] > 0) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port[dev], 0, mpu_irq[dev], IRQF_DISABLED,
+ mpu_port[dev], 0, mpu_irq[dev],
NULL) < 0)
printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n", mpu_port[dev]);
}
diff --git a/sound/isa/als100.c b/sound/isa/als100.c
index 20becc8..706effd 100644
--- a/sound/isa/als100.c
+++ b/sound/isa/als100.c
@@ -256,7 +256,6 @@
mpu_type,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
diff --git a/sound/isa/azt2320.c b/sound/isa/azt2320.c
index aac8dc1..b7bdbf3 100644
--- a/sound/isa/azt2320.c
+++ b/sound/isa/azt2320.c
@@ -234,8 +234,7 @@
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_AZT2320,
mpu_port[dev], 0,
- mpu_irq[dev], IRQF_DISABLED,
- NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
snd_printk(KERN_ERR PFX "no MPU-401 device at 0x%lx\n", mpu_port[dev]);
}
diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c
index fe79a16..dca69f8 100644
--- a/sound/isa/cmi8330.c
+++ b/sound/isa/cmi8330.c
@@ -597,7 +597,7 @@
if (mpuport[dev] != SNDRV_AUTO_PORT) {
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
mpuport[dev], 0, mpuirq[dev],
- IRQF_DISABLED, NULL) < 0)
+ NULL) < 0)
printk(KERN_ERR PFX "no MPU-401 device at 0x%lx.\n",
mpuport[dev]);
}
diff --git a/sound/isa/cs423x/cs4231.c b/sound/isa/cs423x/cs4231.c
index cb9153e..409fa0a 100644
--- a/sound/isa/cs423x/cs4231.c
+++ b/sound/isa/cs423x/cs4231.c
@@ -131,7 +131,6 @@
mpu_irq[n] = -1;
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
mpu_port[n], 0, mpu_irq[n],
- mpu_irq[n] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
dev_warn(dev, "MPU401 not detected\n");
}
diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index 999dc1e..0dbde46 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -449,8 +449,7 @@
mpu_irq[dev] = -1;
if (snd_mpu401_uart_new(card, 0, MPU401_HW_CS4232,
mpu_port[dev], 0,
- mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0, NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
printk(KERN_WARNING IDENT ": MPU401 not detected\n");
}
diff --git a/sound/isa/es1688/es1688.c b/sound/isa/es1688/es1688.c
index 0cde813..5493e9e 100644
--- a/sound/isa/es1688/es1688.c
+++ b/sound/isa/es1688/es1688.c
@@ -174,7 +174,7 @@
chip->mpu_port > 0) {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
chip->mpu_port, 0,
- mpu_irq[n], IRQF_DISABLED, NULL);
+ mpu_irq[n], NULL);
if (error < 0)
return error;
}
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index fb4d6b3..aeee8f8 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -2160,8 +2160,8 @@
if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_ES18XX,
- mpu_port[dev], 0,
- irq[dev], 0, &chip->rmidi);
+ mpu_port[dev], MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi);
if (err < 0)
return err;
}
diff --git a/sound/isa/galaxy/galaxy.c b/sound/isa/galaxy/galaxy.c
index ee54df0..e51d324 100644
--- a/sound/isa/galaxy/galaxy.c
+++ b/sound/isa/galaxy/galaxy.c
@@ -585,8 +585,7 @@
if (mpu_port[n] >= 0) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port[n], 0, mpu_irq[n],
- IRQF_DISABLED, NULL);
+ mpu_port[n], 0, mpu_irq[n], NULL);
if (err < 0)
goto error;
}
diff --git a/sound/isa/gus/gusextreme.c b/sound/isa/gus/gusextreme.c
index 008e8e5..c4733c0 100644
--- a/sound/isa/gus/gusextreme.c
+++ b/sound/isa/gus/gusextreme.c
@@ -317,8 +317,7 @@
if (es1688->mpu_port >= 0x300) {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_ES1688,
- es1688->mpu_port, 0,
- mpu_irq[n], IRQF_DISABLED, NULL);
+ es1688->mpu_port, 0, mpu_irq[n], NULL);
if (error < 0)
goto out;
}
diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c
index 91d6023..0961e2c 100644
--- a/sound/isa/msnd/msnd_pinnacle.c
+++ b/sound/isa/msnd/msnd_pinnacle.c
@@ -600,7 +600,7 @@
mpu_io[0],
MPU401_MODE_INPUT |
MPU401_MODE_OUTPUT,
- mpu_irq[0], IRQF_DISABLED,
+ mpu_irq[0],
&chip->rmidi);
if (err < 0) {
printk(KERN_ERR LOGNAME
diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c
index 9b915e2..de99f47 100644
--- a/sound/isa/opl3sa2.c
+++ b/sound/isa/opl3sa2.c
@@ -707,8 +707,9 @@
}
if (midi_port[dev] >= 0x300 && midi_port[dev] < 0x340) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_OPL3SA2,
- midi_port[dev], 0,
- xirq, 0, &chip->rmidi)) < 0)
+ midi_port[dev],
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi)) < 0)
return err;
}
sprintf(card->longname, "%s at 0x%lx, irq %d, dma %d",
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index 8c24102..d94d0f3 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -1377,8 +1377,7 @@
rmidi = NULL;
else {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port, 0, miro->mpu_irq, IRQF_DISABLED,
- &rmidi);
+ mpu_port, 0, miro->mpu_irq, &rmidi);
if (error < 0)
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
mpu_port);
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index c35dc68..346e12b 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -914,7 +914,7 @@
rmidi = NULL;
else {
error = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- mpu_port, 0, mpu_irq, IRQF_DISABLED, &rmidi);
+ mpu_port, 0, mpu_irq, &rmidi);
if (error)
snd_printk(KERN_WARNING "no MPU-401 device at 0x%lx?\n",
mpu_port);
diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c
index 8ccbcdd..54e3c2c 100644
--- a/sound/isa/sb/jazz16.c
+++ b/sound/isa/sb/jazz16.c
@@ -322,7 +322,6 @@
MPU401_HW_MPU401,
mpu_port[dev], 0,
mpu_irq[dev],
- mpu_irq[dev] >= 0 ? IRQF_DISABLED : 0,
NULL) < 0)
snd_printk(KERN_ERR "no MPU-401 device at 0x%lx\n",
mpu_port[dev]);
diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c
index 4d1c5a3..237f8bd 100644
--- a/sound/isa/sb/sb16.c
+++ b/sound/isa/sb/sb16.c
@@ -394,8 +394,9 @@
if (chip->mpu_port > 0 && chip->mpu_port != SNDRV_AUTO_PORT) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SB,
- chip->mpu_port, 0,
- xirq, 0, &chip->rmidi)) < 0)
+ chip->mpu_port,
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi)) < 0)
return err;
chip->rmidi_callback = snd_mpu401_uart_interrupt;
}
diff --git a/sound/isa/sc6000.c b/sound/isa/sc6000.c
index 9a8bbf6..207c161 100644
--- a/sound/isa/sc6000.c
+++ b/sound/isa/sc6000.c
@@ -658,8 +658,7 @@
if (snd_mpu401_uart_new(card, 0,
MPU401_HW_MPU401,
mpu_port[dev], 0,
- mpu_irq[dev], IRQF_DISABLED,
- NULL) < 0)
+ mpu_irq[dev], NULL) < 0)
snd_printk(KERN_ERR "no MPU-401 device at 0x%lx ?\n",
mpu_port[dev]);
}
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index e2d5d2d..f2379e1 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -825,8 +825,7 @@
int err;
err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
- MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED,
- &rawmidi);
+ MPU401_INFO_INTEGRATED, irq, &rawmidi);
if (err == 0) {
struct snd_mpu401 *mpu = rawmidi->private_data;
mpu->open_input = mpu401_open;
diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c
index 711670e..83f291d 100644
--- a/sound/isa/wavefront/wavefront.c
+++ b/sound/isa/wavefront/wavefront.c
@@ -449,8 +449,7 @@
if (cs4232_mpu_port[dev] > 0 && cs4232_mpu_port[dev] != SNDRV_AUTO_PORT) {
err = snd_mpu401_uart_new(card, midi_dev, MPU401_HW_CS4232,
cs4232_mpu_port[dev], 0,
- cs4232_mpu_irq[dev], IRQF_DISABLED,
- NULL);
+ cs4232_mpu_irq[dev], NULL);
if (err < 0) {
snd_printk (KERN_ERR "can't allocate CS4232 MPU-401 device\n");
return err;
diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c
index a9c1af3..0462869 100644
--- a/sound/pci/als4000.c
+++ b/sound/pci/als4000.c
@@ -931,8 +931,9 @@
if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_ALS4000,
iobase + ALS4K_IOB_30_MIDI_DATA,
- MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
printk(KERN_ERR "als4000: no MPU-401 device at 0x%lx?\n",
iobase + ALS4K_IOB_30_MIDI_DATA);
goto out_err;
diff --git a/sound/pci/au88x0/au88x0_mpu401.c b/sound/pci/au88x0/au88x0_mpu401.c
index 0dc8d25..e6c6a0f 100644
--- a/sound/pci/au88x0/au88x0_mpu401.c
+++ b/sound/pci/au88x0/au88x0_mpu401.c
@@ -84,7 +84,7 @@
#ifdef VORTEX_MPU401_LEGACY
if ((temp =
snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_MPU401, 0x330,
- 0, 0, 0, &rmidi)) != 0) {
+ MPU401_INFO_IRQ_HOOK, -1, &rmidi)) != 0) {
hwwrite(vortex->mmio, VORTEX_CTRL,
(hwread(vortex->mmio, VORTEX_CTRL) &
~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
@@ -94,8 +94,8 @@
port = (unsigned long)(vortex->mmio + VORTEX_MIDI_DATA);
if ((temp =
snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_AUREAL, port,
- MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO,
- 0, 0, &rmidi)) != 0) {
+ MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO |
+ MPU401_INFO_IRQ_HOOK, -1, &rmidi)) != 0) {
hwwrite(vortex->mmio, VORTEX_CTRL,
(hwread(vortex->mmio, VORTEX_CTRL) &
~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 579fc0d..d24fe42 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -2652,8 +2652,9 @@
since our hardware ought to be similar, thus use same ID. */
err = snd_mpu401_uart_new(
card, 0,
- MPU401_HW_AZT2320, chip->mpu_io, MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rmidi
+ MPU401_HW_AZT2320, chip->mpu_io,
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi
);
if (err < 0) {
snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n",
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 9cf99fb..da9c732 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -3228,8 +3228,9 @@
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_CMIPCI,
iomidi,
(integrated_midi ?
- MPU401_INFO_INTEGRATED : 0),
- cm->irq, 0, &cm->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED : 0) |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &cm->rmidi)) < 0) {
printk(KERN_ERR "cmipci: no UART401 device at 0x%lx\n", iomidi);
}
}
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index 26a5a2f..718a264 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -1854,8 +1854,9 @@
}
}
if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
- chip->mpu_port, MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi) < 0) {
+ chip->mpu_port,
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi) < 0) {
printk(KERN_ERR "es1938: unable to initialize MPU-401\n");
} else {
// this line is vital for MIDI interrupt handling on ess-solo1
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 99ea932..407e4ab 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -2843,8 +2843,9 @@
if (enable_mpu[dev]) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
chip->io_port + ESM_MPU401_PORT,
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
printk(KERN_WARNING "es1968: skipping MPU-401 MIDI support..\n");
}
}
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index f9123f0..c55b1b3 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -1306,8 +1306,9 @@
}
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_FM801,
FM801_REG(chip, MPU401_DATA),
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi)) < 0) {
snd_card_free(card);
return err;
}
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 0ccc0eb..8531b98 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -2748,8 +2748,9 @@
if (!c->no_mpu401) {
err = snd_mpu401_uart_new(card, 0, MPU401_HW_ICE1712,
ICEREG(ice, MPU1_CTRL),
- (c->mpu401_1_info_flags | MPU401_INFO_INTEGRATED),
- ice->irq, 0, &ice->rmidi[0]);
+ c->mpu401_1_info_flags |
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &ice->rmidi[0]);
if (err < 0) {
snd_card_free(card);
return err;
@@ -2764,8 +2765,9 @@
/* 2nd port used */
err = snd_mpu401_uart_new(card, 1, MPU401_HW_ICE1712,
ICEREG(ice, MPU2_CTRL),
- (c->mpu401_2_info_flags | MPU401_INFO_INTEGRATED),
- ice->irq, 0, &ice->rmidi[1]);
+ c->mpu401_2_info_flags |
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &ice->rmidi[1]);
if (err < 0) {
snd_card_free(card);
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 0378126..2fd4bf2 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -2820,8 +2820,8 @@
/* TODO enable MIDI IRQ and I/O */
err = snd_mpu401_uart_new(chip->card, 0, MPU401_HW_MPU401,
chip->iobase + MPU401_DATA_PORT,
- MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi);
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rmidi);
if (err < 0)
printk(KERN_WARNING "maestro3: no MIDI support.\n");
#endif
diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c
index 82311fc..53e5508 100644
--- a/sound/pci/oxygen/oxygen_lib.c
+++ b/sound/pci/oxygen/oxygen_lib.c
@@ -678,15 +678,15 @@
goto err_card;
if (chip->model.device_config & (MIDI_OUTPUT | MIDI_INPUT)) {
- unsigned int info_flags = MPU401_INFO_INTEGRATED;
+ unsigned int info_flags =
+ MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK;
if (chip->model.device_config & MIDI_OUTPUT)
info_flags |= MPU401_INFO_OUTPUT;
if (chip->model.device_config & MIDI_INPUT)
info_flags |= MPU401_INFO_INPUT;
err = snd_mpu401_uart_new(card, 0, MPU401_HW_CMIPCI,
chip->addr + OXYGEN_MPU401,
- info_flags, 0, 0,
- &chip->midi);
+ info_flags, -1, &chip->midi);
if (err < 0)
goto err_card;
}
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index e34ae14..88cc776 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -2109,7 +2109,7 @@
val = mpu_port[dev];
pci_write_config_word(chip->pci, PCI_EXT_MPU_Base, val);
err = snd_mpu401_uart_new(card, 0, MPU401_HW_RIPTIDE,
- val, 0, chip->irq, 0,
+ val, MPU401_INFO_IRQ_HOOK, -1,
&chip->rmidi);
if (err < 0)
snd_printk(KERN_WARNING
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index 2571a67..c500816 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -1493,9 +1493,10 @@
return err;
}
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SONICVIBES,
- sonic->midi_port, MPU401_INFO_INTEGRATED,
- sonic->irq, 0,
- &midi_uart)) < 0) {
+ sonic->midi_port,
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &midi_uart)) < 0) {
snd_card_free(card);
return err;
}
diff --git a/sound/pci/trident/trident.c b/sound/pci/trident/trident.c
index d8a128f..5e707ef 100644
--- a/sound/pci/trident/trident.c
+++ b/sound/pci/trident/trident.c
@@ -148,8 +148,9 @@
if (trident->device != TRIDENT_DEVICE_ID_SI7018 &&
(err = snd_mpu401_uart_new(card, 0, MPU401_HW_TRID4DWAVE,
trident->midi_port,
- MPU401_INFO_INTEGRATED,
- trident->irq, 0, &trident->rmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &trident->rmidi)) < 0) {
snd_card_free(card);
return err;
}
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index f03fd62..35d5f43 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -2068,8 +2068,9 @@
pci_write_config_byte(chip->pci, VIA_PNP_CONTROL, legacy_cfg);
if (chip->mpu_res) {
if (snd_mpu401_uart_new(chip->card, 0, MPU401_HW_VIA686A,
- mpu_port, MPU401_INFO_INTEGRATED,
- chip->irq, 0, &chip->rmidi) < 0) {
+ mpu_port, MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK, -1,
+ &chip->rmidi) < 0) {
printk(KERN_WARNING "unable to initialize MPU-401"
" at 0x%lx, skipping\n", mpu_port);
legacy &= ~VIA_FUNC_ENABLE_MIDI;
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index 511d576..3253b04 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -305,8 +305,9 @@
if (chip->mpu_res) {
if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_YMFPCI,
mpu_port[dev],
- MPU401_INFO_INTEGRATED,
- pci->irq, 0, &chip->rawmidi)) < 0) {
+ MPU401_INFO_INTEGRATED |
+ MPU401_INFO_IRQ_HOOK,
+ -1, &chip->rawmidi)) < 0) {
printk(KERN_WARNING "ymfpci: cannot initialize MPU401 at 0x%lx, skipping...\n", mpu_port[dev]);
legacy_ctrl &= ~YMFPCI_LEGACY_MIEN; /* disable MPU401 irq */
pci_write_config_word(pci, PCIR_DSXG_LEGACY, legacy_ctrl);