vmlfb: framebuffer driver for Intel Vermilion Range
Add the Intel Vermilion Range framebuffer support.
Signed-off-by: Alan Hourihane <alanh@tungstengraphics.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 863c598..74d764e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -882,6 +882,22 @@
select FB_DDC
help
+config FB_LE80578
+ tristate "Intel LE80578 (Vermilion) support"
+ depends on FB && PCI && X86
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This driver supports the LE80578 (Vermilion Range) chipset
+
+config FB_CARILLO_RANCH
+ tristate "Intel Carillo Ranch support"
+ depends on FB_LE80578 && FB && PCI && X86
+ help
+ This driver supports the LE80578 (Carillo Ranch) board
+
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 6c7b26e..a59395d 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -56,6 +56,7 @@
obj-$(CONFIG_FB_FM2) += fm2fb.o
obj-$(CONFIG_FB_CYBLA) += cyblafb.o
obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
+obj-$(CONFIG_FB_LE80578) += vermilion/
obj-$(CONFIG_FB_S3) += s3fb.o
obj-$(CONFIG_FB_STI) += stifb.o
obj-$(CONFIG_FB_FFB) += ffb.o sbuslib.o
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 47d15b5..fbef663 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -63,3 +63,11 @@
help
If you have a Frontpath ProGear say Y to enable the
backlight driver.
+
+config BACKLIGHT_CARILLO_RANCH
+ tristate "Intel Carillo Ranch Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
+ default n
+ help
+ If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
+ backlight driver.
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 0c3ce46..c6e2266 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -6,3 +6,4 @@
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
+obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c
new file mode 100644
index 0000000..e9bbc34
--- /dev/null
+++ b/drivers/video/backlight/cr_bllcd.c
@@ -0,0 +1,287 @@
+/*
+ * Copyright (c) Intel Corp. 2007.
+ * All Rights Reserved.
+ *
+ * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ * develop this driver.
+ *
+ * This file is part of the Carillo Ranch video subsystem driver.
+ * The Carillo Ranch video subsystem driver is free software;
+ * you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The Carillo Ranch video subsystem driver is distributed
+ * in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Authors:
+ * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
+ * Alan Hourihane <alanh-at-tungstengraphics-dot-com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/lcd.h>
+#include <linux/pci.h>
+#include <asm/uaccess.h>
+
+/* The LVDS- and panel power controls sits on the
+ * GPIO port of the ISA bridge.
+ */
+
+#define CRVML_DEVICE_LPC 0x27B8
+#define CRVML_REG_GPIOBAR 0x48
+#define CRVML_REG_GPIOEN 0x4C
+#define CRVML_GPIOEN_BIT (1 << 4)
+#define CRVML_PANEL_PORT 0x38
+#define CRVML_LVDS_ON 0x00000001
+#define CRVML_PANEL_ON 0x00000002
+#define CRVML_BACKLIGHT_OFF 0x00000004
+
+/* The PLL Clock register sits on Host bridge */
+#define CRVML_DEVICE_MCH 0x5001
+#define CRVML_REG_MCHBAR 0x44
+#define CRVML_REG_MCHEN 0x54
+#define CRVML_MCHEN_BIT (1 << 28)
+#define CRVML_MCHMAP_SIZE 4096
+#define CRVML_REG_CLOCK 0xc3c
+#define CRVML_CLOCK_SHIFT 8
+#define CRVML_CLOCK_MASK 0x00000f00
+
+static struct pci_dev *lpc_dev;
+static u32 gpio_bar;
+
+struct cr_panel {
+ struct backlight_device *cr_backlight_device;
+ struct lcd_device *cr_lcd_device;
+};
+
+static int cr_backlight_set_intensity(struct backlight_device *bd)
+{
+ int intensity = bd->props.brightness;
+ u32 addr = gpio_bar + CRVML_PANEL_PORT;
+ u32 cur = inl(addr);
+
+ if (bd->props.power == FB_BLANK_UNBLANK)
+ intensity = FB_BLANK_UNBLANK;
+ if (bd->props.fb_blank == FB_BLANK_UNBLANK)
+ intensity = FB_BLANK_UNBLANK;
+ if (bd->props.power == FB_BLANK_POWERDOWN)
+ intensity = FB_BLANK_POWERDOWN;
+ if (bd->props.fb_blank == FB_BLANK_POWERDOWN)
+ intensity = FB_BLANK_POWERDOWN;
+
+ if (intensity == FB_BLANK_UNBLANK) { /* FULL ON */
+ cur &= ~CRVML_BACKLIGHT_OFF;
+ outl(cur, addr);
+ } else if (intensity == FB_BLANK_POWERDOWN) { /* OFF */
+ cur |= CRVML_BACKLIGHT_OFF;
+ outl(cur, addr);
+ } /* anything else, don't bother */
+
+ return 0;
+}
+
+static int cr_backlight_get_intensity(struct backlight_device *bd)
+{
+ u32 addr = gpio_bar + CRVML_PANEL_PORT;
+ u32 cur = inl(addr);
+ u8 intensity;
+
+ if (cur & CRVML_BACKLIGHT_OFF)
+ intensity = FB_BLANK_POWERDOWN;
+ else
+ intensity = FB_BLANK_UNBLANK;
+
+ return intensity;
+}
+
+static struct backlight_ops cr_backlight_ops = {
+ .get_brightness = cr_backlight_get_intensity,
+ .update_status = cr_backlight_set_intensity,
+};
+
+static void cr_panel_on(void)
+{
+ u32 addr = gpio_bar + CRVML_PANEL_PORT;
+ u32 cur = inl(addr);
+
+ if (!(cur & CRVML_PANEL_ON)) {
+ /* Make sure LVDS controller is down. */
+ if (cur & 0x00000001) {
+ cur &= ~CRVML_LVDS_ON;
+ outl(cur, addr);
+ }
+ /* Power up Panel */
+ schedule_timeout(HZ / 10);
+ cur |= CRVML_PANEL_ON;
+ outl(cur, addr);
+ }
+
+ /* Power up LVDS controller */
+
+ if (!(cur & CRVML_LVDS_ON)) {
+ schedule_timeout(HZ / 10);
+ outl(cur | CRVML_LVDS_ON, addr);
+ }
+}
+
+static void cr_panel_off(void)
+{
+ u32 addr = gpio_bar + CRVML_PANEL_PORT;
+ u32 cur = inl(addr);
+
+ /* Power down LVDS controller first to avoid high currents */
+ if (cur & CRVML_LVDS_ON) {
+ cur &= ~CRVML_LVDS_ON;
+ outl(cur, addr);
+ }
+ if (cur & CRVML_PANEL_ON) {
+ schedule_timeout(HZ / 10);
+ outl(cur & ~CRVML_PANEL_ON, addr);
+ }
+}
+
+static int cr_lcd_set_power(struct lcd_device *ld, int power)
+{
+ if (power == FB_BLANK_UNBLANK)
+ cr_panel_on();
+ if (power == FB_BLANK_POWERDOWN)
+ cr_panel_off();
+
+ return 0;
+}
+
+static struct lcd_ops cr_lcd_ops = {
+ .set_power = cr_lcd_set_power,
+};
+
+static int cr_backlight_probe(struct platform_device *pdev)
+{
+ struct cr_panel *crp;
+ u8 dev_en;
+
+ crp = kzalloc(sizeof(crp), GFP_KERNEL);
+ if (crp == NULL)
+ return -ENOMEM;
+
+ lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ CRVML_DEVICE_LPC, NULL);
+ if (!lpc_dev) {
+ printk("INTEL CARILLO RANCH LPC not found.\n");
+ return -ENODEV;
+ }
+
+ pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en);
+ if (!(dev_en & CRVML_GPIOEN_BIT)) {
+ printk(KERN_ERR
+ "Carillo Ranch GPIO device was not enabled.\n");
+ pci_dev_put(lpc_dev);
+ return -ENODEV;
+ }
+
+ crp->cr_backlight_device = backlight_device_register("cr-backlight",
+ &pdev->dev, NULL,
+ &cr_backlight_ops);
+ if (IS_ERR(crp->cr_backlight_device)) {
+ pci_dev_put(lpc_dev);
+ return PTR_ERR(crp->cr_backlight_device);
+ }
+
+ crp->cr_lcd_device = lcd_device_register("cr-lcd",
+ &pdev->dev,
+ &cr_lcd_ops);
+
+ if (IS_ERR(crp->cr_lcd_device)) {
+ pci_dev_put(lpc_dev);
+ return PTR_ERR(crp->cr_backlight_device);
+ }
+
+ pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR,
+ &gpio_bar);
+ gpio_bar &= ~0x3F;
+
+ crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK;
+ crp->cr_backlight_device->props.brightness = 0;
+ crp->cr_backlight_device->props.max_brightness = 0;
+ cr_backlight_set_intensity(crp->cr_backlight_device);
+
+ cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK);
+
+ platform_set_drvdata(pdev, crp);
+
+ return 0;
+}
+
+static int cr_backlight_remove(struct platform_device *pdev)
+{
+ struct cr_panel *crp = platform_get_drvdata(pdev);
+ crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN;
+ crp->cr_backlight_device->props.brightness = 0;
+ crp->cr_backlight_device->props.max_brightness = 0;
+ cr_backlight_set_intensity(crp->cr_backlight_device);
+ cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN);
+ backlight_device_unregister(crp->cr_backlight_device);
+ lcd_device_unregister(crp->cr_lcd_device);
+ pci_dev_put(lpc_dev);
+
+ return 0;
+}
+
+static struct platform_driver cr_backlight_driver = {
+ .probe = cr_backlight_probe,
+ .remove = cr_backlight_remove,
+ .driver = {
+ .name = "cr_backlight",
+ },
+};
+
+static struct platform_device *crp;
+
+static int __init cr_backlight_init(void)
+{
+ int ret = platform_driver_register(&cr_backlight_driver);
+
+ if (!ret) {
+ crp = platform_device_alloc("cr_backlight", -1);
+ if (!crp)
+ return -ENOMEM;
+
+ ret = platform_device_add(crp);
+
+ if (ret) {
+ platform_device_put(crp);
+ platform_driver_unregister(&cr_backlight_driver);
+ }
+ }
+
+ printk("Carillo Ranch Backlight Driver Initialized.\n");
+
+ return ret;
+}
+
+static void __exit cr_backlight_exit(void)
+{
+ platform_device_unregister(crp);
+ platform_driver_unregister(&cr_backlight_driver);
+}
+
+module_init(cr_backlight_init);
+module_exit(cr_backlight_exit);
+
+MODULE_AUTHOR("Tungsten Graphics Inc.");
+MODULE_DESCRIPTION("Carillo Ranch Backlight Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/vermilion/Makefile b/drivers/video/vermilion/Makefile
new file mode 100644
index 0000000..cc21a65
--- /dev/null
+++ b/drivers/video/vermilion/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_FB_LE80578) += vmlfb.o
+obj-$(CONFIG_FB_CARILLO_RANCH) += crvml.o
+
+vmlfb-objs := vermilion.o
+crvml-objs := cr_pll.o
diff --git a/drivers/video/vermilion/cr_pll.c b/drivers/video/vermilion/cr_pll.c
new file mode 100644
index 0000000..ebc6e6e
--- /dev/null
+++ b/drivers/video/vermilion/cr_pll.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (c) Intel Corp. 2007.
+ * All Rights Reserved.
+ *
+ * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ * develop this driver.
+ *
+ * This file is part of the Carillo Ranch video subsystem driver.
+ * The Carillo Ranch video subsystem driver is free software;
+ * you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The Carillo Ranch video subsystem driver is distributed
+ * in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Authors:
+ * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
+ * Alan Hourihane <alanh-at-tungstengraphics-dot-com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include "vermilion.h"
+
+/* The PLL Clock register sits on Host bridge */
+#define CRVML_DEVICE_MCH 0x5001
+#define CRVML_REG_MCHBAR 0x44
+#define CRVML_REG_MCHEN 0x54
+#define CRVML_MCHEN_BIT (1 << 28)
+#define CRVML_MCHMAP_SIZE 4096
+#define CRVML_REG_CLOCK 0xc3c
+#define CRVML_CLOCK_SHIFT 8
+#define CRVML_CLOCK_MASK 0x00000f00
+
+static struct pci_dev *mch_dev;
+static u32 mch_bar;
+static void __iomem *mch_regs_base;
+static u32 saved_clock;
+
+static const unsigned crvml_clocks[] = {
+ 6750,
+ 13500,
+ 27000,
+ 29700,
+ 37125,
+ 54000,
+ 59400,
+ 74250,
+ 120000
+ /*
+ * There are more clocks, but they are disabled on the CR board.
+ */
+};
+
+static const u32 crvml_clock_bits[] = {
+ 0x0a,
+ 0x09,
+ 0x08,
+ 0x07,
+ 0x06,
+ 0x05,
+ 0x04,
+ 0x03,
+ 0x0b
+};
+
+static const unsigned crvml_num_clocks = ARRAY_SIZE(crvml_clocks);
+
+static int crvml_sys_restore(struct vml_sys *sys)
+{
+ void __iomem *clock_reg = mch_regs_base + CRVML_REG_CLOCK;
+
+ iowrite32(saved_clock, clock_reg);
+ ioread32(clock_reg);
+
+ return 0;
+}
+
+static int crvml_sys_save(struct vml_sys *sys)
+{
+ void __iomem *clock_reg = mch_regs_base + CRVML_REG_CLOCK;
+
+ saved_clock = ioread32(clock_reg);
+
+ return 0;
+}
+
+static int crvml_nearest_index(const struct vml_sys *sys, int clock)
+{
+ int i;
+ int cur_index = 0;
+ int cur_diff;
+ int diff;
+
+ cur_diff = clock - crvml_clocks[0];
+ cur_diff = (cur_diff < 0) ? -cur_diff : cur_diff;
+ for (i = 1; i < crvml_num_clocks; ++i) {
+ diff = clock - crvml_clocks[i];
+ diff = (diff < 0) ? -diff : diff;
+ if (diff < cur_diff) {
+ cur_index = i;
+ cur_diff = diff;
+ }
+ }
+ return cur_index;
+}
+
+static int crvml_nearest_clock(const struct vml_sys *sys, int clock)
+{
+ return crvml_clocks[crvml_nearest_index(sys, clock)];
+}
+
+static int crvml_set_clock(struct vml_sys *sys, int clock)
+{
+ void __iomem *clock_reg = mch_regs_base + CRVML_REG_CLOCK;
+ int index;
+ u32 clock_val;
+
+ index = crvml_nearest_index(sys, clock);
+
+ if (crvml_clocks[index] != clock)
+ return -EINVAL;
+
+ clock_val = ioread32(clock_reg) & ~CRVML_CLOCK_MASK;
+ clock_val = crvml_clock_bits[index] << CRVML_CLOCK_SHIFT;
+ iowrite32(clock_val, clock_reg);
+ ioread32(clock_reg);
+
+ return 0;
+}
+
+static struct vml_sys cr_pll_ops = {
+ .name = "Carillo Ranch",
+ .save = crvml_sys_save,
+ .restore = crvml_sys_restore,
+ .set_clock = crvml_set_clock,
+ .nearest_clock = crvml_nearest_clock,
+};
+
+static int __init cr_pll_init(void)
+{
+ int err;
+ u32 dev_en;
+
+ mch_dev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ CRVML_DEVICE_MCH, NULL);
+ if (!mch_dev) {
+ printk(KERN_ERR
+ "Could not find Carillo Ranch MCH device.\n");
+ return -ENODEV;
+ }
+
+ pci_read_config_dword(mch_dev, CRVML_REG_MCHEN, &dev_en);
+ if (!(dev_en & CRVML_MCHEN_BIT)) {
+ printk(KERN_ERR
+ "Carillo Ranch MCH device was not enabled.\n");
+ pci_dev_put(mch_dev);
+ return -ENODEV;
+ }
+
+ pci_read_config_dword(mch_dev, CRVML_REG_MCHBAR,
+ &mch_bar);
+ mch_regs_base =
+ ioremap_nocache(mch_bar, CRVML_MCHMAP_SIZE);
+ if (!mch_regs_base) {
+ printk(KERN_ERR
+ "Carillo Ranch MCH device was not enabled.\n");
+ pci_dev_put(mch_dev);
+ return -ENODEV;
+ }
+
+ err = vmlfb_register_subsys(&cr_pll_ops);
+ if (err) {
+ printk(KERN_ERR
+ "Carillo Ranch failed to initialize vml_sys.\n");
+ pci_dev_put(mch_dev);
+ return err;
+ }
+
+ return 0;
+}
+
+static void __exit cr_pll_exit(void)
+{
+ vmlfb_unregister_subsys(&cr_pll_ops);
+
+ iounmap(mch_regs_base);
+ pci_dev_put(mch_dev);
+}
+
+module_init(cr_pll_init);
+module_exit(cr_pll_exit);
+
+MODULE_AUTHOR("Tungsten Graphics Inc.");
+MODULE_DESCRIPTION("Carillo Ranch PLL Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/vermilion/vermilion.c b/drivers/video/vermilion/vermilion.c
new file mode 100644
index 0000000..de531c9
--- /dev/null
+++ b/drivers/video/vermilion/vermilion.c
@@ -0,0 +1,1195 @@
+/*
+ * Copyright (c) Intel Corp. 2007.
+ * All Rights Reserved.
+ *
+ * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ * develop this driver.
+ *
+ * This file is part of the Vermilion Range fb driver.
+ * The Vermilion Range fb driver is free software;
+ * you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The Vermilion Range fb driver is distributed
+ * in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Authors:
+ * Thomas Hellström <thomas-at-tungstengraphics-dot-com>
+ * Michel Dänzer <michel-at-tungstengraphics-dot-com>
+ * Alan Hourihane <alanh-at-tungstengraphics-dot-com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <linux/mmzone.h>
+#include <asm/uaccess.h>
+
+/* #define VERMILION_DEBUG */
+
+#include "vermilion.h"
+
+#define MODULE_NAME "vmlfb"
+
+#define VML_TOHW(_val, _width) ((((_val) << (_width)) + 0x7FFF - (_val)) >> 16)
+
+static struct mutex vml_mutex;
+static struct list_head global_no_mode;
+static struct list_head global_has_mode;
+static struct fb_ops vmlfb_ops;
+static struct vml_sys *subsys = NULL;
+static char *vml_default_mode = "1024x768@60";
+static struct fb_videomode defaultmode = {
+ NULL, 60, 1024, 768, 12896, 144, 24, 29, 3, 136, 6,
+ 0, FB_VMODE_NONINTERLACED
+};
+
+static u32 vml_mem_requested = (10 * 1024 * 1024);
+static u32 vml_mem_contig = (4 * 1024 * 1024);
+static u32 vml_mem_min = (4 * 1024 * 1024);
+
+static u32 vml_clocks[] = {
+ 6750,
+ 13500,
+ 27000,
+ 29700,
+ 37125,
+ 54000,
+ 59400,
+ 74250,
+ 120000,
+ 148500
+};
+
+static u32 vml_num_clocks = ARRAY_SIZE(vml_clocks);
+
+/*
+ * Allocate a contiguous vram area and make its linear kernel map
+ * uncached.
+ */
+
+static int vmlfb_alloc_vram_area(struct vram_area *va, unsigned max_order,
+ unsigned min_order)
+{
+ gfp_t flags;
+ unsigned long i;
+ pgprot_t wc_pageprot;
+
+ wc_pageprot = PAGE_KERNEL_NOCACHE;
+ max_order++;
+ do {
+ /*
+ * Really try hard to get the needed memory.
+ * We need memory below the first 32MB, so we
+ * add the __GFP_DMA flag that guarantees that we are
+ * below the first 16MB.
+ */
+
+ flags = __GFP_DMA | __GFP_HIGH;
+ va->logical =
+ __get_free_pages(flags, --max_order);
+ } while (va->logical == 0 && max_order > min_order);
+
+ if (!va->logical)
+ return -ENOMEM;
+
+ va->phys = virt_to_phys((void *)va->logical);
+ va->size = PAGE_SIZE << max_order;
+ va->order = max_order;
+
+ /*
+ * It seems like __get_free_pages only ups the usage count
+ * of the first page. This doesn't work with nopage mapping, so
+ * up the usage count once more.
+ */
+
+ memset((void *)va->logical, 0x00, va->size);
+ for (i = va->logical; i < va->logical + va->size; i += PAGE_SIZE) {
+ get_page(virt_to_page(i));
+ }
+
+ /*
+ * Change caching policy of the linear kernel map to avoid
+ * mapping type conflicts with user-space mappings.
+ * The first global_flush_tlb() is really only there to do a global
+ * wbinvd().
+ */
+
+ global_flush_tlb();
+ change_page_attr(virt_to_page(va->logical), va->size >> PAGE_SHIFT,
+ wc_pageprot);
+ global_flush_tlb();
+
+ printk(KERN_DEBUG MODULE_NAME
+ ": Allocated %ld bytes vram area at 0x%08lx\n",
+ va->size, va->phys);
+
+ return 0;
+}
+
+/*
+ * Free a contiguous vram area and reset its linear kernel map
+ * mapping type.
+ */
+
+static void vmlfb_free_vram_area(struct vram_area *va)
+{
+ unsigned long j;
+
+ if (va->logical) {
+
+ /*
+ * Reset the linear kernel map caching policy.
+ */
+
+ change_page_attr(virt_to_page(va->logical),
+ va->size >> PAGE_SHIFT, PAGE_KERNEL);
+ global_flush_tlb();
+
+ /*
+ * Decrease the usage count on the pages we've used
+ * to compensate for upping when allocating.
+ */
+
+ for (j = va->logical; j < va->logical + va->size;
+ j += PAGE_SIZE) {
+ (void)put_page_testzero(virt_to_page(j));
+ }
+
+ printk(KERN_DEBUG MODULE_NAME
+ ": Freeing %ld bytes vram area at 0x%08lx\n",
+ va->size, va->phys);
+ free_pages(va->logical, va->order);
+
+ va->logical = 0;
+ }
+}
+
+/*
+ * Free allocated vram.
+ */
+
+static void vmlfb_free_vram(struct vml_info *vinfo)
+{
+ int i;
+
+ for (i = 0; i < vinfo->num_areas; ++i) {
+ vmlfb_free_vram_area(&vinfo->vram[i]);
+ }
+ vinfo->num_areas = 0;
+}
+
+/*
+ * Allocate vram. Currently we try to allocate contiguous areas from the
+ * __GFP_DMA zone and puzzle them together. A better approach would be to
+ * allocate one contiguous area for scanout and use one-page allocations for
+ * offscreen areas. This requires user-space and GPU virtual mappings.
+ */
+
+static int vmlfb_alloc_vram(struct vml_info *vinfo,
+ size_t requested,
+ size_t min_total, size_t min_contig)
+{
+ int i, j;
+ int order;
+ int contiguous;
+ int err;
+ struct vram_area *va;
+ struct vram_area *va2;
+
+ vinfo->num_areas = 0;
+ for (i = 0; i < VML_VRAM_AREAS; ++i) {
+ va = &vinfo->vram[i];
+ order = 0;
+
+ while (requested > (PAGE_SIZE << order) && order < MAX_ORDER)
+ order++;
+
+ err = vmlfb_alloc_vram_area(va, order, 0);
+
+ if (err)
+ break;
+
+ if (i == 0) {
+ vinfo->vram_start = va->phys;
+ vinfo->vram_logical = (void __iomem *) va->logical;
+ vinfo->vram_contig_size = va->size;
+ vinfo->num_areas = 1;
+ } else {
+ contiguous = 0;
+
+ for (j = 0; j < i; ++j) {
+ va2 = &vinfo->vram[j];
+ if (va->phys + va->size == va2->phys ||
+ va2->phys + va2->size == va->phys) {
+ contiguous = 1;
+ break;
+ }
+ }
+
+ if (contiguous) {
+ vinfo->num_areas++;
+ if (va->phys < vinfo->vram_start) {
+ vinfo->vram_start = va->phys;
+ vinfo->vram_logical =
+ (void __iomem *)va->logical;
+ }
+ vinfo->vram_contig_size += va->size;
+ } else {
+ vmlfb_free_vram_area(va);
+ break;
+ }
+ }
+
+ if (requested < va->size)
+ break;
+ else
+ requested -= va->size;
+ }
+
+ if (vinfo->vram_contig_size > min_total &&
+ vinfo->vram_contig_size > min_contig) {
+
+ printk(KERN_DEBUG MODULE_NAME
+ ": Contiguous vram: %ld bytes at physical 0x%08lx.\n",
+ (unsigned long)vinfo->vram_contig_size,
+ (unsigned long)vinfo->vram_start);
+
+ return 0;
+ }
+
+ printk(KERN_ERR MODULE_NAME
+ ": Could not allocate requested minimal amount of vram.\n");
+
+ vmlfb_free_vram(vinfo);
+
+ return -ENOMEM;
+}
+
+/*
+ * Find the GPU to use with our display controller.
+ */
+
+static int vmlfb_get_gpu(struct vml_par *par)
+{
+ mutex_lock(&vml_mutex);
+
+ par->gpu = pci_get_device(PCI_VENDOR_ID_INTEL, VML_DEVICE_GPU, NULL);
+
+ if (!par->gpu) {
+ mutex_unlock(&vml_mutex);
+ return -ENODEV;
+ }
+
+ mutex_unlock(&vml_mutex);
+
+ if (pci_enable_device(par->gpu) < 0)
+ return -ENODEV;
+
+ return 0;
+}
+
+/*
+ * Find a contiguous vram area that contains a given offset from vram start.
+ */
+static int vmlfb_vram_offset(struct vml_info *vinfo, unsigned long offset)
+{
+ unsigned long aoffset;
+ unsigned i;
+
+ for (i = 0; i < vinfo->num_areas; ++i) {
+ aoffset = offset - (vinfo->vram[i].phys - vinfo->vram_start);
+
+ if (aoffset < vinfo->vram[i].size) {
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+/*
+ * Remap the MMIO register spaces of the VDC and the GPU.
+ */
+
+static int vmlfb_enable_mmio(struct vml_par *par)
+{
+ int err;
+
+ par->vdc_mem_base = pci_resource_start(par->vdc, 0);
+ par->vdc_mem_size = pci_resource_len(par->vdc, 0);
+ if (!request_mem_region(par->vdc_mem_base, par->vdc_mem_size, "vmlfb")) {
+ printk(KERN_ERR MODULE_NAME
+ ": Could not claim display controller MMIO.\n");
+ return -EBUSY;
+ }
+ par->vdc_mem = ioremap_nocache(par->vdc_mem_base, par->vdc_mem_size);
+ if (par->vdc_mem == NULL) {
+ printk(KERN_ERR MODULE_NAME
+ ": Could not map display controller MMIO.\n");
+ err = -ENOMEM;
+ goto out_err_0;
+ }
+
+ par->gpu_mem_base = pci_resource_start(par->gpu, 0);
+ par->gpu_mem_size = pci_resource_len(par->gpu, 0);
+ if (!request_mem_region(par->gpu_mem_base, par->gpu_mem_size, "vmlfb")) {
+ printk(KERN_ERR MODULE_NAME ": Could not claim GPU MMIO.\n");
+ err = -EBUSY;
+ goto out_err_1;
+ }
+ par->gpu_mem = ioremap_nocache(par->gpu_mem_base, par->gpu_mem_size);
+ if (par->gpu_mem == NULL) {
+ printk(KERN_ERR MODULE_NAME ": Could not map GPU MMIO.\n");
+ err = -ENOMEM;
+ goto out_err_2;
+ }
+
+ return 0;
+
+out_err_2:
+ release_mem_region(par->gpu_mem_base, par->gpu_mem_size);
+out_err_1:
+ iounmap(par->vdc_mem);
+out_err_0:
+ release_mem_region(par->vdc_mem_base, par->vdc_mem_size);
+ return err;
+}
+
+/*
+ * Unmap the VDC and GPU register spaces.
+ */
+
+static void vmlfb_disable_mmio(struct vml_par *par)
+{
+ iounmap(par->gpu_mem);
+ release_mem_region(par->gpu_mem_base, par->gpu_mem_size);
+ iounmap(par->vdc_mem);
+ release_mem_region(par->vdc_mem_base, par->vdc_mem_size);
+}
+
+/*
+ * Release and uninit the VDC and GPU.
+ */
+
+static void vmlfb_release_devices(struct vml_par *par)
+{
+ if (atomic_dec_and_test(&par->refcount)) {
+ pci_set_drvdata(par->vdc, NULL);
+ pci_disable_device(par->gpu);
+ pci_disable_device(par->vdc);
+ }
+}
+
+/*
+ * Free up allocated resources for a device.
+ */
+
+static void __devexit vml_pci_remove(struct pci_dev *dev)
+{
+ struct fb_info *info;
+ struct vml_info *vinfo;
+ struct vml_par *par;
+
+ info = pci_get_drvdata(dev);
+ if (info) {
+ vinfo = container_of(info, struct vml_info, info);
+ par = vinfo->par;
+ mutex_lock(&vml_mutex);
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info->cmap);
+ vmlfb_free_vram(vinfo);
+ vmlfb_disable_mmio(par);
+ vmlfb_release_devices(par);
+ kfree(vinfo);
+ kfree(par);
+ mutex_unlock(&vml_mutex);
+ }
+}
+
+static void vmlfb_set_pref_pixel_format(struct fb_var_screeninfo *var)
+{
+ switch (var->bits_per_pixel) {
+ case 16:
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ var->green.offset = 5;
+ var->green.length = 5;
+ var->red.offset = 10;
+ var->red.length = 5;
+ var->transp.offset = 15;
+ var->transp.length = 1;
+ break;
+ case 32:
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->transp.offset = 24;
+ var->transp.length = 0;
+ break;
+ default:
+ break;
+ }
+
+ var->blue.msb_right = var->green.msb_right =
+ var->red.msb_right = var->transp.msb_right = 0;
+}
+
+/*
+ * Device initialization.
+ * We initialize one vml_par struct per device and one vml_info
+ * struct per pipe. Currently we have only one pipe.
+ */
+
+static int __devinit vml_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct vml_info *vinfo;
+ struct fb_info *info;
+ struct vml_par *par;
+ int err = 0;
+
+ par = kzalloc(sizeof(*par), GFP_KERNEL);
+ if (par == NULL)
+ return -ENOMEM;
+
+ vinfo = kzalloc(sizeof(*vinfo), GFP_KERNEL);
+ if (vinfo == NULL) {
+ err = -ENOMEM;
+ goto out_err_0;
+ }
+
+ vinfo->par = par;
+ par->vdc = dev;
+ atomic_set(&par->refcount, 1);
+
+ switch (id->device) {
+ case VML_DEVICE_VDC:
+ if ((err = vmlfb_get_gpu(par)))
+ goto out_err_1;
+ pci_set_drvdata(dev, &vinfo->info);
+ break;
+ default:
+ err = -ENODEV;
+ goto out_err_1;
+ break;
+ }
+
+ info = &vinfo->info;
+ info->flags = FBINFO_DEFAULT | FBINFO_PARTIAL_PAN_OK;
+
+ err = vmlfb_enable_mmio(par);
+ if (err)
+ goto out_err_2;
+
+ err = vmlfb_alloc_vram(vinfo, vml_mem_requested,
+ vml_mem_contig, vml_mem_min);
+ if (err)
+ goto out_err_3;
+
+ strcpy(info->fix.id, "Vermilion Range");
+ info->fix.mmio_start = 0;
+ info->fix.mmio_len = 0;
+ info->fix.smem_start = vinfo->vram_start;
+ info->fix.smem_len = vinfo->vram_contig_size;
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ info->fix.ypanstep = 1;
+ info->fix.xpanstep = 1;
+ info->fix.ywrapstep = 0;
+ info->fix.accel = FB_ACCEL_NONE;
+ info->screen_base = vinfo->vram_logical;
+ info->pseudo_palette = vinfo->pseudo_palette;
+ info->par = par;
+ info->fbops = &vmlfb_ops;
+ info->device = &dev->dev;
+
+ INIT_LIST_HEAD(&vinfo->head);
+ vinfo->pipe_disabled = 1;
+ vinfo->cur_blank_mode = FB_BLANK_UNBLANK;
+
+ info->var.grayscale = 0;
+ info->var.bits_per_pixel = 16;
+ vmlfb_set_pref_pixel_format(&info->var);
+
+ if (!fb_find_mode
+ (&info->var, info, vml_default_mode, NULL, 0, &defaultmode, 16)) {
+ printk(KERN_ERR MODULE_NAME ": Could not find initial mode\n");
+ }
+
+ if (fb_alloc_cmap(&info->cmap, 256, 1) < 0) {
+ err = -ENOMEM;
+ goto out_err_4;
+ }
+
+ err = register_framebuffer(info);
+ if (err) {
+ printk(KERN_ERR MODULE_NAME ": Register framebuffer error.\n");
+ goto out_err_5;
+ }
+
+ printk("Initialized vmlfb\n");
+
+ return 0;
+
+out_err_5:
+ fb_dealloc_cmap(&info->cmap);
+out_err_4:
+ vmlfb_free_vram(vinfo);
+out_err_3:
+ vmlfb_disable_mmio(par);
+out_err_2:
+ vmlfb_release_devices(par);
+out_err_1:
+ kfree(vinfo);
+out_err_0:
+ kfree(par);
+ return err;
+}
+
+static int vmlfb_open(struct fb_info *info, int user)
+{
+ /*
+ * Save registers here?
+ */
+ return 0;
+}
+
+static int vmlfb_release(struct fb_info *info, int user)
+{
+ /*
+ * Restore registers here.
+ */
+
+ return 0;
+}
+
+static int vml_nearest_clock(int clock)
+{
+
+ int i;
+ int cur_index;
+ int cur_diff;
+ int diff;
+
+ cur_index = 0;
+ cur_diff = clock - vml_clocks[0];
+ cur_diff = (cur_diff < 0) ? -cur_diff : cur_diff;
+ for (i = 1; i < vml_num_clocks; ++i) {
+ diff = clock - vml_clocks[i];
+ diff = (diff < 0) ? -diff : diff;
+ if (diff < cur_diff) {
+ cur_index = i;
+ cur_diff = diff;
+ }
+ }
+ return vml_clocks[cur_index];
+}
+
+static int vmlfb_check_var_locked(struct fb_var_screeninfo *var,
+ struct vml_info *vinfo)
+{
+ u32 pitch;
+ u64 mem;
+ int nearest_clock;
+ int clock;
+ int clock_diff;
+ struct fb_var_screeninfo v;
+
+ v = *var;
+ clock = PICOS2KHZ(var->pixclock);
+
+ if (subsys && subsys->nearest_clock) {
+ nearest_clock = subsys->nearest_clock(subsys, clock);
+ } else {
+ nearest_clock = vml_nearest_clock(clock);
+ }
+
+ /*
+ * Accept a 20% diff.
+ */
+
+ clock_diff = nearest_clock - clock;
+ clock_diff = (clock_diff < 0) ? -clock_diff : clock_diff;
+ if (clock_diff > clock / 5) {
+#if 0
+ printk(KERN_DEBUG MODULE_NAME ": Diff failure. %d %d\n",clock_diff,clock);
+#endif
+ return -EINVAL;
+ }
+
+ v.pixclock = KHZ2PICOS(nearest_clock);
+
+ if (var->xres > VML_MAX_XRES || var->yres > VML_MAX_YRES) {
+ printk(KERN_DEBUG MODULE_NAME ": Resolution failure.\n");
+ return -EINVAL;
+ }
+ if (var->xres_virtual > VML_MAX_XRES_VIRTUAL) {
+ printk(KERN_DEBUG MODULE_NAME
+ ": Virtual resolution failure.\n");
+ return -EINVAL;
+ }
+ switch (v.bits_per_pixel) {
+ case 0 ... 16:
+ v.bits_per_pixel = 16;
+ break;
+ case 17 ... 32:
+ v.bits_per_pixel = 32;
+ break;
+ default:
+ printk(KERN_DEBUG MODULE_NAME ": Invalid bpp: %d.\n",
+ var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ pitch = __ALIGN_MASK((var->xres * var->bits_per_pixel) >> 3, 0x3F);
+ mem = pitch * var->yres_virtual;
+ if (mem > vinfo->vram_contig_size) {
+ return -ENOMEM;
+ }
+
+ switch (v.bits_per_pixel) {
+ case 16:
+ if (var->blue.offset != 0 ||
+ var->blue.length != 5 ||
+ var->green.offset != 5 ||
+ var->green.length != 5 ||
+ var->red.offset != 10 ||
+ var->red.length != 5 ||
+ var->transp.offset != 15 || var->transp.length != 1) {
+ vmlfb_set_pref_pixel_format(&v);
+ }
+ break;
+ case 32:
+ if (var->blue.offset != 0 ||
+ var->blue.length != 8 ||
+ var->green.offset != 8 ||
+ var->green.length != 8 ||
+ var->red.offset != 16 ||
+ var->red.length != 8 ||
+ (var->transp.length != 0 && var->transp.length != 8) ||
+ (var->transp.length == 8 && var->transp.offset != 24)) {
+ vmlfb_set_pref_pixel_format(&v);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *var = v;
+
+ return 0;
+}
+
+static int vmlfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct vml_info *vinfo = container_of(info, struct vml_info, info);
+ int ret;
+
+ mutex_lock(&vml_mutex);
+ ret = vmlfb_check_var_locked(var, vinfo);
+ mutex_unlock(&vml_mutex);
+
+ return ret;
+}
+
+static void vml_wait_vblank(struct vml_info *vinfo)
+{
+ /* Wait for vblank. For now, just wait for a 50Hz cycle (20ms)) */
+ mdelay(20);
+}
+
+static void vmlfb_disable_pipe(struct vml_info *vinfo)
+{
+ struct vml_par *par = vinfo->par;
+
+ /* Disable the MDVO pad */
+ VML_WRITE32(par, VML_RCOMPSTAT, 0);
+ while (!(VML_READ32(par, VML_RCOMPSTAT) & VML_MDVO_VDC_I_RCOMP)) ;
+
+ /* Disable display planes */
+ VML_WRITE32(par, VML_DSPCCNTR,
+ VML_READ32(par, VML_DSPCCNTR) & ~VML_GFX_ENABLE);
+ (void)VML_READ32(par, VML_DSPCCNTR);
+ /* Wait for vblank for the disable to take effect */
+ vml_wait_vblank(vinfo);
+
+ /* Next, disable display pipes */
+ VML_WRITE32(par, VML_PIPEACONF, 0);
+ (void)VML_READ32(par, VML_PIPEACONF);
+
+ vinfo->pipe_disabled = 1;
+}
+
+#ifdef VERMILION_DEBUG
+static void vml_dump_regs(struct vml_info *vinfo)
+{
+ struct vml_par *par = vinfo->par;
+
+ printk(KERN_DEBUG MODULE_NAME ": Modesetting register dump:\n");
+ printk(KERN_DEBUG MODULE_NAME ": \tHTOTAL_A : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_HTOTAL_A));
+ printk(KERN_DEBUG MODULE_NAME ": \tHBLANK_A : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_HBLANK_A));
+ printk(KERN_DEBUG MODULE_NAME ": \tHSYNC_A : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_HSYNC_A));
+ printk(KERN_DEBUG MODULE_NAME ": \tVTOTAL_A : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_VTOTAL_A));
+ printk(KERN_DEBUG MODULE_NAME ": \tVBLANK_A : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_VBLANK_A));
+ printk(KERN_DEBUG MODULE_NAME ": \tVSYNC_A : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_VSYNC_A));
+ printk(KERN_DEBUG MODULE_NAME ": \tDSPCSTRIDE : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_DSPCSTRIDE));
+ printk(KERN_DEBUG MODULE_NAME ": \tDSPCSIZE : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_DSPCSIZE));
+ printk(KERN_DEBUG MODULE_NAME ": \tDSPCPOS : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_DSPCPOS));
+ printk(KERN_DEBUG MODULE_NAME ": \tDSPARB : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_DSPARB));
+ printk(KERN_DEBUG MODULE_NAME ": \tDSPCADDR : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_DSPCADDR));
+ printk(KERN_DEBUG MODULE_NAME ": \tBCLRPAT_A : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_BCLRPAT_A));
+ printk(KERN_DEBUG MODULE_NAME ": \tCANVSCLR_A : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_CANVSCLR_A));
+ printk(KERN_DEBUG MODULE_NAME ": \tPIPEASRC : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_PIPEASRC));
+ printk(KERN_DEBUG MODULE_NAME ": \tPIPEACONF : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_PIPEACONF));
+ printk(KERN_DEBUG MODULE_NAME ": \tDSPCCNTR : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_DSPCCNTR));
+ printk(KERN_DEBUG MODULE_NAME ": \tRCOMPSTAT : 0x%08x\n",
+ (unsigned)VML_READ32(par, VML_RCOMPSTAT));
+ printk(KERN_DEBUG MODULE_NAME ": End of modesetting register dump.\n");
+}
+#endif
+
+static int vmlfb_set_par_locked(struct vml_info *vinfo)
+{
+ struct vml_par *par = vinfo->par;
+ struct fb_info *info = &vinfo->info;
+ struct fb_var_screeninfo *var = &info->var;
+ u32 htotal, hactive, hblank_start, hblank_end, hsync_start, hsync_end;
+ u32 vtotal, vactive, vblank_start, vblank_end, vsync_start, vsync_end;
+ u32 dspcntr;
+ int clock;
+
+ vinfo->bytes_per_pixel = var->bits_per_pixel >> 3;
+ vinfo->stride =
+ __ALIGN_MASK(var->xres_virtual * vinfo->bytes_per_pixel, 0x3F);
+ info->fix.line_length = vinfo->stride;
+
+ if (!subsys)
+ return 0;
+
+ htotal =
+ var->xres + var->right_margin + var->hsync_len + var->left_margin;
+ hactive = var->xres;
+ hblank_start = var->xres;
+ hblank_end = htotal;
+ hsync_start = hactive + var->right_margin;
+ hsync_end = hsync_start + var->hsync_len;
+
+ vtotal =
+ var->yres + var->lower_margin + var->vsync_len + var->upper_margin;
+ vactive = var->yres;
+ vblank_start = var->yres;
+ vblank_end = vtotal;
+ vsync_start = vactive + var->lower_margin;
+ vsync_end = vsync_start + var->vsync_len;
+
+ dspcntr = VML_GFX_ENABLE | VML_GFX_GAMMABYPASS;
+ clock = PICOS2KHZ(var->pixclock);
+
+ if (subsys->nearest_clock) {
+ clock = subsys->nearest_clock(subsys, clock);
+ } else {
+ clock = vml_nearest_clock(clock);
+ }
+ printk(KERN_DEBUG MODULE_NAME
+ ": Set mode Hfreq : %d kHz, Vfreq : %d Hz.\n", clock / htotal,
+ ((clock / htotal) * 1000) / vtotal);
+
+ switch (var->bits_per_pixel) {
+ case 16:
+ dspcntr |= VML_GFX_ARGB1555;
+ break;
+ case 32:
+ if (var->transp.length == 8)
+ dspcntr |= VML_GFX_ARGB8888 | VML_GFX_ALPHAMULT;
+ else
+ dspcntr |= VML_GFX_RGB0888;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ vmlfb_disable_pipe(vinfo);
+ mb();
+
+ if (subsys->set_clock)
+ subsys->set_clock(subsys, clock);
+ else
+ return -EINVAL;
+
+ VML_WRITE32(par, VML_HTOTAL_A, ((htotal - 1) << 16) | (hactive - 1));
+ VML_WRITE32(par, VML_HBLANK_A,
+ ((hblank_end - 1) << 16) | (hblank_start - 1));
+ VML_WRITE32(par, VML_HSYNC_A,
+ ((hsync_end - 1) << 16) | (hsync_start - 1));
+ VML_WRITE32(par, VML_VTOTAL_A, ((vtotal - 1) << 16) | (vactive - 1));
+ VML_WRITE32(par, VML_VBLANK_A,
+ ((vblank_end - 1) << 16) | (vblank_start - 1));
+ VML_WRITE32(par, VML_VSYNC_A,
+ ((vsync_end - 1) << 16) | (vsync_start - 1));
+ VML_WRITE32(par, VML_DSPCSTRIDE, vinfo->stride);
+ VML_WRITE32(par, VML_DSPCSIZE,
+ ((var->yres - 1) << 16) | (var->xres - 1));
+ VML_WRITE32(par, VML_DSPCPOS, 0x00000000);
+ VML_WRITE32(par, VML_DSPARB, VML_FIFO_DEFAULT);
+ VML_WRITE32(par, VML_BCLRPAT_A, 0x00000000);
+ VML_WRITE32(par, VML_CANVSCLR_A, 0x00000000);
+ VML_WRITE32(par, VML_PIPEASRC,
+ ((var->xres - 1) << 16) | (var->yres - 1));
+
+ wmb();
+ VML_WRITE32(par, VML_PIPEACONF, VML_PIPE_ENABLE);
+ wmb();
+ VML_WRITE32(par, VML_DSPCCNTR, dspcntr);
+ wmb();
+ VML_WRITE32(par, VML_DSPCADDR, (u32) vinfo->vram_start +
+ var->yoffset * vinfo->stride +
+ var->xoffset * vinfo->bytes_per_pixel);
+
+ VML_WRITE32(par, VML_RCOMPSTAT, VML_MDVO_PAD_ENABLE);
+
+ while (!(VML_READ32(par, VML_RCOMPSTAT) &
+ (VML_MDVO_VDC_I_RCOMP | VML_MDVO_PAD_ENABLE))) ;
+
+ vinfo->pipe_disabled = 0;
+#ifdef VERMILION_DEBUG
+ vml_dump_regs(vinfo);
+#endif
+
+ return 0;
+}
+
+static int vmlfb_set_par(struct fb_info *info)
+{
+ struct vml_info *vinfo = container_of(info, struct vml_info, info);
+ int ret;
+
+ mutex_lock(&vml_mutex);
+ list_del(&vinfo->head);
+ list_add(&vinfo->head, (subsys) ? &global_has_mode : &global_no_mode);
+ ret = vmlfb_set_par_locked(vinfo);
+
+ mutex_unlock(&vml_mutex);
+ return ret;
+}
+
+static int vmlfb_blank_locked(struct vml_info *vinfo)
+{
+ struct vml_par *par = vinfo->par;
+ u32 cur = VML_READ32(par, VML_PIPEACONF);
+
+ switch (vinfo->cur_blank_mode) {
+ case FB_BLANK_UNBLANK:
+ if (vinfo->pipe_disabled) {
+ vmlfb_set_par_locked(vinfo);
+ }
+ VML_WRITE32(par, VML_PIPEACONF, cur & ~VML_PIPE_FORCE_BORDER);
+ (void)VML_READ32(par, VML_PIPEACONF);
+ break;
+ case FB_BLANK_NORMAL:
+ if (vinfo->pipe_disabled) {
+ vmlfb_set_par_locked(vinfo);
+ }
+ VML_WRITE32(par, VML_PIPEACONF, cur | VML_PIPE_FORCE_BORDER);
+ (void)VML_READ32(par, VML_PIPEACONF);
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ if (!vinfo->pipe_disabled) {
+ vmlfb_disable_pipe(vinfo);
+ }
+ break;
+ case FB_BLANK_POWERDOWN:
+ if (!vinfo->pipe_disabled) {
+ vmlfb_disable_pipe(vinfo);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int vmlfb_blank(int blank_mode, struct fb_info *info)
+{
+ struct vml_info *vinfo = container_of(info, struct vml_info, info);
+ int ret;
+
+ mutex_lock(&vml_mutex);
+ vinfo->cur_blank_mode = blank_mode;
+ ret = vmlfb_blank_locked(vinfo);
+ mutex_unlock(&vml_mutex);
+ return ret;
+}
+
+static int vmlfb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct vml_info *vinfo = container_of(info, struct vml_info, info);
+ struct vml_par *par = vinfo->par;
+
+ mutex_lock(&vml_mutex);
+ VML_WRITE32(par, VML_DSPCADDR, (u32) vinfo->vram_start +
+ var->yoffset * vinfo->stride +
+ var->xoffset * vinfo->bytes_per_pixel);
+ (void)VML_READ32(par, VML_DSPCADDR);
+ mutex_unlock(&vml_mutex);
+
+ return 0;
+}
+
+static int vmlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *info)
+{
+ u32 v;
+
+ if (regno >= 16)
+ return -EINVAL;
+
+ if (info->var.grayscale) {
+ red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+ if (info->fix.visual != FB_VISUAL_TRUECOLOR)
+ return -EINVAL;
+
+ red = VML_TOHW(red, info->var.red.length);
+ blue = VML_TOHW(blue, info->var.blue.length);
+ green = VML_TOHW(green, info->var.green.length);
+ transp = VML_TOHW(transp, info->var.transp.length);
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+
+ switch (info->var.bits_per_pixel) {
+ case 16:
+ ((u32 *) info->pseudo_palette)[regno] = v;
+ break;
+ case 24:
+ case 32:
+ ((u32 *) info->pseudo_palette)[regno] = v;
+ break;
+ }
+ return 0;
+}
+
+static int vmlfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+ struct vml_info *vinfo = container_of(info, struct vml_info, info);
+ unsigned long size = vma->vm_end - vma->vm_start;
+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ int ret;
+
+ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+ return -EINVAL;
+ if (offset + size > vinfo->vram_contig_size)
+ return -EINVAL;
+ ret = vmlfb_vram_offset(vinfo, offset);
+ if (ret)
+ return -EINVAL;
+ offset += vinfo->vram_start;
+ pgprot_val(vma->vm_page_prot) |= _PAGE_PCD;
+ pgprot_val(vma->vm_page_prot) &= ~_PAGE_PWT;
+ vma->vm_flags |= VM_RESERVED | VM_IO;
+ if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT,
+ size, vma->vm_page_prot))
+ return -EAGAIN;
+ return 0;
+}
+
+static int vmlfb_sync(struct fb_info *info)
+{
+ return 0;
+}
+
+static int vmlfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+ return -EINVAL; /* just to force soft_cursor() call */
+}
+
+static struct fb_ops vmlfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = vmlfb_open,
+ .fb_release = vmlfb_release,
+ .fb_check_var = vmlfb_check_var,
+ .fb_set_par = vmlfb_set_par,
+ .fb_blank = vmlfb_blank,
+ .fb_pan_display = vmlfb_pan_display,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_cursor = vmlfb_cursor,
+ .fb_sync = vmlfb_sync,
+ .fb_mmap = vmlfb_mmap,
+ .fb_setcolreg = vmlfb_setcolreg
+};
+
+static struct pci_device_id vml_ids[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, VML_DEVICE_VDC)},
+ {0}
+};
+
+static struct pci_driver vmlfb_pci_driver = {
+ .name = "vmlfb",
+ .id_table = vml_ids,
+ .probe = vml_pci_probe,
+ .remove = __devexit_p(vml_pci_remove)
+};
+
+static void __exit vmlfb_cleanup(void)
+{
+ pci_unregister_driver(&vmlfb_pci_driver);
+}
+
+static int __init vmlfb_init(void)
+{
+
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options(MODULE_NAME, &option))
+ return -ENODEV;
+#endif
+
+ printk(KERN_DEBUG MODULE_NAME ": initializing\n");
+ mutex_init(&vml_mutex);
+ INIT_LIST_HEAD(&global_no_mode);
+ INIT_LIST_HEAD(&global_has_mode);
+
+ return pci_register_driver(&vmlfb_pci_driver);
+}
+
+int vmlfb_register_subsys(struct vml_sys *sys)
+{
+ struct vml_info *entry;
+ struct list_head *list;
+ u32 save_activate;
+
+ mutex_lock(&vml_mutex);
+ if (subsys != NULL) {
+ subsys->restore(subsys);
+ }
+ subsys = sys;
+ subsys->save(subsys);
+
+ /*
+ * We need to restart list traversal for each item, since we
+ * release the list mutex in the loop.
+ */
+
+ list = global_no_mode.next;
+ while (list != &global_no_mode) {
+ list_del_init(list);
+ entry = list_entry(list, struct vml_info, head);
+
+ /*
+ * First, try the current mode which might not be
+ * completely validated with respect to the pixel clock.
+ */
+
+ if (!vmlfb_check_var_locked(&entry->info.var, entry)) {
+ vmlfb_set_par_locked(entry);
+ list_add_tail(list, &global_has_mode);
+ } else {
+
+ /*
+ * Didn't work. Try to find another mode,
+ * that matches this subsys.
+ */
+
+ mutex_unlock(&vml_mutex);
+ save_activate = entry->info.var.activate;
+ entry->info.var.bits_per_pixel = 16;
+ vmlfb_set_pref_pixel_format(&entry->info.var);
+ if (fb_find_mode(&entry->info.var,
+ &entry->info,
+ vml_default_mode, NULL, 0, NULL, 16)) {
+ entry->info.var.activate |=
+ FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+ fb_set_var(&entry->info, &entry->info.var);
+ } else {
+ printk(KERN_ERR MODULE_NAME
+ ": Sorry. no mode found for this subsys.\n");
+ }
+ entry->info.var.activate = save_activate;
+ mutex_lock(&vml_mutex);
+ }
+ vmlfb_blank_locked(entry);
+ list = global_no_mode.next;
+ }
+ mutex_unlock(&vml_mutex);
+
+ printk(KERN_DEBUG MODULE_NAME ": Registered %s subsystem.\n",
+ subsys->name ? subsys->name : "unknown");
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(vmlfb_register_subsys);
+
+void vmlfb_unregister_subsys(struct vml_sys *sys)
+{
+ struct vml_info *entry, *next;
+
+ mutex_lock(&vml_mutex);
+ if (subsys != sys) {
+ mutex_unlock(&vml_mutex);
+ return;
+ }
+ subsys->restore(subsys);
+ subsys = NULL;
+ list_for_each_entry_safe(entry, next, &global_has_mode, head) {
+ printk(KERN_DEBUG MODULE_NAME ": subsys disable pipe\n");
+ vmlfb_disable_pipe(entry);
+ list_del(&entry->head);
+ list_add_tail(&entry->head, &global_no_mode);
+ }
+ mutex_unlock(&vml_mutex);
+}
+
+EXPORT_SYMBOL_GPL(vmlfb_unregister_subsys);
+
+module_init(vmlfb_init);
+module_exit(vmlfb_cleanup);
+
+MODULE_AUTHOR("Tungsten Graphics");
+MODULE_DESCRIPTION("Initialization of the Vermilion display devices");
+MODULE_VERSION("1.0.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/vermilion/vermilion.h b/drivers/video/vermilion/vermilion.h
new file mode 100644
index 0000000..1fc6695
--- /dev/null
+++ b/drivers/video/vermilion/vermilion.h
@@ -0,0 +1,260 @@
+/*
+ * Copyright (c) Intel Corp. 2007.
+ * All Rights Reserved.
+ *
+ * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ * develop this driver.
+ *
+ * This file is part of the Vermilion Range fb driver.
+ * The Vermilion Range fb driver is free software;
+ * you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * The Vermilion Range fb driver is distributed
+ * in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * Authors:
+ * Thomas Hellström <thomas-at-tungstengraphics-dot-com>
+ */
+
+#ifndef _VERMILION_H_
+#define _VERMILION_H_
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/pci.h>
+#include <asm/atomic.h>
+#include <linux/mutex.h>
+
+#define VML_DEVICE_GPU 0x5002
+#define VML_DEVICE_VDC 0x5009
+
+#define VML_VRAM_AREAS 3
+#define VML_MAX_XRES 1024
+#define VML_MAX_YRES 768
+#define VML_MAX_XRES_VIRTUAL 1040
+
+/*
+ * Display controller registers:
+ */
+
+/* Display controller 10-bit color representation */
+
+#define VML_R_MASK 0x3FF00000
+#define VML_R_SHIFT 20
+#define VML_G_MASK 0x000FFC00
+#define VML_G_SHIFT 10
+#define VML_B_MASK 0x000003FF
+#define VML_B_SHIFT 0
+
+/* Graphics plane control */
+#define VML_DSPCCNTR 0x00072180
+#define VML_GFX_ENABLE 0x80000000
+#define VML_GFX_GAMMABYPASS 0x40000000
+#define VML_GFX_ARGB1555 0x0C000000
+#define VML_GFX_RGB0888 0x18000000
+#define VML_GFX_ARGB8888 0x1C000000
+#define VML_GFX_ALPHACONST 0x02000000
+#define VML_GFX_ALPHAMULT 0x01000000
+#define VML_GFX_CONST_ALPHA 0x000000FF
+
+/* Graphics plane start address. Pixel aligned. */
+#define VML_DSPCADDR 0x00072184
+
+/* Graphics plane stride register. */
+#define VML_DSPCSTRIDE 0x00072188
+
+/* Graphics plane position register. */
+#define VML_DSPCPOS 0x0007218C
+#define VML_POS_YMASK 0x0FFF0000
+#define VML_POS_YSHIFT 16
+#define VML_POS_XMASK 0x00000FFF
+#define VML_POS_XSHIFT 0
+
+/* Graphics plane height and width */
+#define VML_DSPCSIZE 0x00072190
+#define VML_SIZE_HMASK 0x0FFF0000
+#define VML_SIZE_HSHIFT 16
+#define VML_SISE_WMASK 0x00000FFF
+#define VML_SIZE_WSHIFT 0
+
+/* Graphics plane gamma correction lookup table registers (129 * 32 bits) */
+#define VML_DSPCGAMLUT 0x00072200
+
+/* Pixel video output configuration register */
+#define VML_PVOCONFIG 0x00061140
+#define VML_CONFIG_BASE 0x80000000
+#define VML_CONFIG_PIXEL_SWAP 0x04000000
+#define VML_CONFIG_DE_INV 0x01000000
+#define VML_CONFIG_HREF_INV 0x00400000
+#define VML_CONFIG_VREF_INV 0x00100000
+#define VML_CONFIG_CLK_INV 0x00040000
+#define VML_CONFIG_CLK_DIV2 0x00010000
+#define VML_CONFIG_ESTRB_INV 0x00008000
+
+/* Pipe A Horizontal total register */
+#define VML_HTOTAL_A 0x00060000
+#define VML_HTOTAL_MASK 0x1FFF0000
+#define VML_HTOTAL_SHIFT 16
+#define VML_HTOTAL_VAL 8192
+#define VML_HACTIVE_MASK 0x000007FF
+#define VML_HACTIVE_SHIFT 0
+#define VML_HACTIVE_VAL 4096
+
+/* Pipe A Horizontal Blank register */
+#define VML_HBLANK_A 0x00060004
+#define VML_HBLANK_END_MASK 0x1FFF0000
+#define VML_HBLANK_END_SHIFT 16
+#define VML_HBLANK_END_VAL 8192
+#define VML_HBLANK_START_MASK 0x00001FFF
+#define VML_HBLANK_START_SHIFT 0
+#define VML_HBLANK_START_VAL 8192
+
+/* Pipe A Horizontal Sync register */
+#define VML_HSYNC_A 0x00060008
+#define VML_HSYNC_END_MASK 0x1FFF0000
+#define VML_HSYNC_END_SHIFT 16
+#define VML_HSYNC_END_VAL 8192
+#define VML_HSYNC_START_MASK 0x00001FFF
+#define VML_HSYNC_START_SHIFT 0
+#define VML_HSYNC_START_VAL 8192
+
+/* Pipe A Vertical total register */
+#define VML_VTOTAL_A 0x0006000C
+#define VML_VTOTAL_MASK 0x1FFF0000
+#define VML_VTOTAL_SHIFT 16
+#define VML_VTOTAL_VAL 8192
+#define VML_VACTIVE_MASK 0x000007FF
+#define VML_VACTIVE_SHIFT 0
+#define VML_VACTIVE_VAL 4096
+
+/* Pipe A Vertical Blank register */
+#define VML_VBLANK_A 0x00060010
+#define VML_VBLANK_END_MASK 0x1FFF0000
+#define VML_VBLANK_END_SHIFT 16
+#define VML_VBLANK_END_VAL 8192
+#define VML_VBLANK_START_MASK 0x00001FFF
+#define VML_VBLANK_START_SHIFT 0
+#define VML_VBLANK_START_VAL 8192
+
+/* Pipe A Vertical Sync register */
+#define VML_VSYNC_A 0x00060014
+#define VML_VSYNC_END_MASK 0x1FFF0000
+#define VML_VSYNC_END_SHIFT 16
+#define VML_VSYNC_END_VAL 8192
+#define VML_VSYNC_START_MASK 0x00001FFF
+#define VML_VSYNC_START_SHIFT 0
+#define VML_VSYNC_START_VAL 8192
+
+/* Pipe A Source Image size (minus one - equal to active size)
+ * Programmable while pipe is enabled.
+ */
+#define VML_PIPEASRC 0x0006001C
+#define VML_PIPEASRC_HMASK 0x0FFF0000
+#define VML_PIPEASRC_HSHIFT 16
+#define VML_PIPEASRC_VMASK 0x00000FFF
+#define VML_PIPEASRC_VSHIFT 0
+
+/* Pipe A Border Color Pattern register (10 bit color) */
+#define VML_BCLRPAT_A 0x00060020
+
+/* Pipe A Canvas Color register (10 bit color) */
+#define VML_CANVSCLR_A 0x00060024
+
+/* Pipe A Configuration register */
+#define VML_PIPEACONF 0x00070008
+#define VML_PIPE_BASE 0x00000000
+#define VML_PIPE_ENABLE 0x80000000
+#define VML_PIPE_FORCE_BORDER 0x02000000
+#define VML_PIPE_PLANES_OFF 0x00080000
+#define VML_PIPE_ARGB_OUTPUT_MODE 0x00040000
+
+/* Pipe A FIFO setting */
+#define VML_DSPARB 0x00070030
+#define VML_FIFO_DEFAULT 0x00001D9C
+
+/* MDVO rcomp status & pads control register */
+#define VML_RCOMPSTAT 0x00070048
+#define VML_MDVO_VDC_I_RCOMP 0x80000000
+#define VML_MDVO_POWERSAVE_OFF 0x00000008
+#define VML_MDVO_PAD_ENABLE 0x00000004
+#define VML_MDVO_PULLDOWN_ENABLE 0x00000001
+
+struct vml_par {
+ struct pci_dev *vdc;
+ u64 vdc_mem_base;
+ u64 vdc_mem_size;
+ char __iomem *vdc_mem;
+
+ struct pci_dev *gpu;
+ u64 gpu_mem_base;
+ u64 gpu_mem_size;
+ char __iomem *gpu_mem;
+
+ atomic_t refcount;
+};
+
+struct vram_area {
+ unsigned long logical;
+ unsigned long phys;
+ unsigned long size;
+ unsigned order;
+};
+
+struct vml_info {
+ struct fb_info info;
+ struct vml_par *par;
+ struct list_head head;
+ struct vram_area vram[VML_VRAM_AREAS];
+ u64 vram_start;
+ u64 vram_contig_size;
+ u32 num_areas;
+ void __iomem *vram_logical;
+ u32 pseudo_palette[16];
+ u32 stride;
+ u32 bytes_per_pixel;
+ atomic_t vmas;
+ int cur_blank_mode;
+ int pipe_disabled;
+};
+
+/*
+ * Subsystem
+ */
+
+struct vml_sys {
+ char *name;
+
+ /*
+ * Save / Restore;
+ */
+
+ int (*save) (struct vml_sys * sys);
+ int (*restore) (struct vml_sys * sys);
+
+ /*
+ * PLL programming;
+ */
+
+ int (*set_clock) (struct vml_sys * sys, int clock);
+ int (*nearest_clock) (const struct vml_sys * sys, int clock);
+};
+
+extern int vmlfb_register_subsys(struct vml_sys *sys);
+extern void vmlfb_unregister_subsys(struct vml_sys *sys);
+
+#define VML_READ32(_par, _offset) \
+ (ioread32((_par)->vdc_mem + (_offset)))
+#define VML_WRITE32(_par, _offset, _value) \
+ iowrite32(_value, (_par)->vdc_mem + (_offset))
+
+#endif