usb: musb: split omap2430 to its own platform_driver
Just adding its own platform_driver, not really
using it yet.
When all HW glue layers are converted, more patches
will come to split power management code from musb_core
and move it completely to HW glue layer.
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 7d3ea53..542387a 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -77,7 +77,7 @@
static u64 musb_dmamask = DMA_BIT_MASK(32);
static struct platform_device musb_device = {
- .name = "musb-hdrc",
+ .name = "musb-omap2430",
.id = -1,
.dev = {
.dma_mask = &musb_dmamask,
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 52d18db..4792001 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -17,10 +17,11 @@
musb_hdrc-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o
musb_hdrc-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
musb_hdrc-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o
-musb_hdrc-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o
musb_hdrc-$(CONFIG_USB_MUSB_AM35X) += am35x.o
musb_hdrc-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
+obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o
+
# the kconfig must guarantee that only one of the
# possible I/O schemes will be enabled at a time ...
# PIO only, or DMA (several potential schemes).
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 5f0d0f1..78bb1e5 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -31,6 +31,8 @@
#include <linux/list.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include "musb_core.h"
#include "omap2430.h"
@@ -341,3 +343,85 @@
.set_vbus = omap2430_musb_set_vbus,
};
+
+static u64 omap2430_dmamask = DMA_BIT_MASK(32);
+
+static int __init omap2430_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
+ struct platform_device *musb;
+
+ int ret = -ENOMEM;
+
+ musb = platform_device_alloc("musb-hdrc", -1);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err0;
+ }
+
+ musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &omap2430_dmamask;
+ musb->dev.coherent_dma_mask = omap2430_dmamask;
+
+ platform_set_drvdata(pdev, musb);
+
+ ret = platform_device_add_resources(musb, pdev->resource,
+ pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err1;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err1;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err1;
+ }
+
+ return 0;
+
+err1:
+ platform_device_put(musb);
+
+err0:
+ return ret;
+}
+
+static int __exit omap2430_remove(struct platform_device *pdev)
+{
+ struct platform_device *musb = platform_get_drvdata(pdev);
+
+ platform_device_del(musb);
+ platform_device_put(musb);
+
+ return 0;
+}
+
+static struct platform_driver omap2430_driver = {
+ .remove = __exit_p(omap2430_remove),
+ .driver = {
+ .name = "musb-omap2430",
+ },
+};
+
+MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init omap2430_init(void)
+{
+ return platform_driver_probe(&omap2430_driver, omap2430_probe);
+}
+subsys_initcall(omap2430_init);
+
+static void __exit omap2430_exit(void)
+{
+ platform_driver_unregister(&omap2430_driver);
+}
+module_exit(omap2430_exit);