| /* Linux driver for devices based on the DiBcom DiB0700 USB bridge |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation, version 2. |
| * |
| * Copyright (C) 2005-6 DiBcom, SA |
| */ |
| #include "dib0700.h" |
| |
| #include "dib3000mc.h" |
| #include "dib7000m.h" |
| #include "dib7000p.h" |
| #include "mt2060.h" |
| |
| static int force_lna_activation; |
| module_param(force_lna_activation, int, 0644); |
| MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), " |
| "if applicable for the device (default: 0=automatic/off)."); |
| |
| /* Hauppauge Nova-T 500 |
| * has a LNA on GPIO0 which is enabled by setting 1 */ |
| static struct mt2060_config bristol_mt2060_config[2] = { |
| { |
| .i2c_address = 0x60, |
| .clock_out = 3, |
| }, { |
| .i2c_address = 0x61, |
| } |
| }; |
| |
| static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { |
| .band_caps = BAND_VHF | BAND_UHF, |
| .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), |
| |
| .agc1_max = 42598, |
| .agc1_min = 17694, |
| .agc2_max = 45875, |
| .agc2_min = 0, |
| |
| .agc1_pt1 = 0, |
| .agc1_pt2 = 59, |
| |
| .agc1_slope1 = 0, |
| .agc1_slope2 = 69, |
| |
| .agc2_pt1 = 0, |
| .agc2_pt2 = 59, |
| |
| .agc2_slope1 = 111, |
| .agc2_slope2 = 28, |
| }; |
| |
| static struct dib3000mc_config bristol_dib3000mc_config[2] = { |
| { .agc = &bristol_dib3000p_mt2060_agc_config, |
| .max_time = 0x196, |
| .ln_adc_level = 0x1cc7, |
| .output_mpeg2_in_188_bytes = 1, |
| }, |
| { .agc = &bristol_dib3000p_mt2060_agc_config, |
| .max_time = 0x196, |
| .ln_adc_level = 0x1cc7, |
| .output_mpeg2_in_188_bytes = 1, |
| } |
| }; |
| |
| static int bristol_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| if (adap->id == 0) { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); |
| |
| if (force_lna_activation) |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| else |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); |
| |
| if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) { |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); |
| return -ENODEV; |
| } |
| } |
| st->mt2060_if1[adap->id] = 1220; |
| return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, |
| (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0; |
| } |
| |
| static int bristol_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); |
| return dvb_attach(mt2060_attach,adap->fe, tun_i2c, &bristol_mt2060_config[adap->id], |
| st->mt2060_if1[adap->id]) == NULL ? -ENODEV : 0; |
| } |
| |
| /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */ |
| static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = { |
| BAND_UHF | BAND_VHF, // band_caps |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup |
| |
| 712, // inv_gain |
| 41, // time_stabiliz |
| |
| 0, // alpha_level |
| 118, // thlock |
| |
| 0, // wbd_inv |
| 4095, // wbd_ref |
| 0, // wbd_sel |
| 0, // wbd_alpha |
| |
| 42598, // agc1_max |
| 17694, // agc1_min |
| 45875, // agc2_max |
| 2621, // agc2_min |
| 0, // agc1_pt1 |
| 76, // agc1_pt2 |
| 139, // agc1_pt3 |
| 52, // agc1_slope1 |
| 59, // agc1_slope2 |
| 107, // agc2_pt1 |
| 172, // agc2_pt2 |
| 57, // agc2_slope1 |
| 70, // agc2_slope2 |
| |
| 21, // alpha_mant |
| 25, // alpha_exp |
| 28, // beta_mant |
| 48, // beta_exp |
| |
| 1, // perform_agc_softsplit |
| { 0, // split_min |
| 107, // split_max |
| 51800, // global_split_min |
| 24700 // global_split_max |
| }, |
| }; |
| |
| static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = { |
| BAND_UHF | BAND_VHF, |
| |
| /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, |
| * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ |
| (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup |
| |
| 712, // inv_gain |
| 41, // time_stabiliz |
| |
| 0, // alpha_level |
| 118, // thlock |
| |
| 0, // wbd_inv |
| 4095, // wbd_ref |
| 0, // wbd_sel |
| 0, // wbd_alpha |
| |
| 42598, // agc1_max |
| 16384, // agc1_min |
| 42598, // agc2_max |
| 0, // agc2_min |
| |
| 0, // agc1_pt1 |
| 137, // agc1_pt2 |
| 255, // agc1_pt3 |
| |
| 0, // agc1_slope1 |
| 255, // agc1_slope2 |
| |
| 0, // agc2_pt1 |
| 0, // agc2_pt2 |
| |
| 0, // agc2_slope1 |
| 41, // agc2_slope2 |
| |
| 15, // alpha_mant |
| 25, // alpha_exp |
| |
| 28, // beta_mant |
| 48, // beta_exp |
| |
| 0, // perform_agc_softsplit |
| }; |
| |
| static struct dibx000_bandwidth_config stk7700p_pll_config = { |
| 60000, 30000, // internal, sampling |
| 1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass |
| 0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo |
| (3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k |
| 60258167, // ifreq |
| 20452225, // timf |
| }; |
| |
| static struct dib7000m_config stk7700p_dib7000m_config = { |
| .dvbt_mode = 1, |
| .output_mpeg2_in_188_bytes = 1, |
| .quartz_direct = 1, |
| |
| .agc_config_count = 1, |
| .agc = &stk7700p_7000m_mt2060_agc_config, |
| .bw = &stk7700p_pll_config, |
| |
| .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, |
| }; |
| |
| static struct dib7000p_config stk7700p_dib7000p_config = { |
| .output_mpeg2_in_188_bytes = 1, |
| |
| .agc = &stk7700p_7000p_mt2060_agc_config, |
| .bw = &stk7700p_pll_config, |
| |
| .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, |
| .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, |
| .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, |
| }; |
| |
| static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| /* unless there is no real power management in DVB - we leave the device on GPIO6 */ |
| |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50); |
| |
| dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); |
| dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); |
| |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); |
| dib0700_ctrl_clock(adap->dev, 72, 1); |
| dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100); |
| |
| dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); |
| |
| st->mt2060_if1[0] = 1220; |
| |
| if (dib7000pc_detection(&adap->dev->i2c_adap)) { |
| adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config); |
| st->is_dib7000pc = 1; |
| } else |
| adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config); |
| |
| return adap->fe == NULL ? -ENODEV : 0; |
| } |
| |
| static struct mt2060_config stk7700p_mt2060_config = { |
| 0x60 |
| }; |
| |
| static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) |
| { |
| struct dib0700_state *st = adap->dev->priv; |
| struct i2c_adapter *tun_i2c; |
| |
| if (st->is_dib7000pc) |
| tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| else |
| tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1); |
| |
| return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config, |
| st->mt2060_if1[0]) == NULL ? -ENODEV : 0; |
| } |
| |
| struct usb_device_id dib0700_usb_id_table[] = { |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) }, |
| { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) }, |
| |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) }, |
| { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) }, |
| { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) }, |
| { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) }, |
| { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) }, |
| { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) }, |
| { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) }, |
| { } /* Terminating entry */ |
| }; |
| MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); |
| |
| #define DIB0700_DEFAULT_DEVICE_PROPERTIES \ |
| .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ |
| .usb_ctrl = DEVICE_SPECIFIC, \ |
| .firmware = "dvb-usb-dib0700-02-rc1.fw", \ |
| .download_firmware = dib0700_download_firmware, \ |
| .no_reconnect = 1, \ |
| .size_of_priv = sizeof(struct dib0700_state), \ |
| .i2c_algo = &dib0700_i2c_algo, \ |
| .identify_state = dib0700_identify_state |
| |
| #define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \ |
| .streaming_ctrl = dib0700_streaming_ctrl, \ |
| .stream = { \ |
| .type = USB_BULK, \ |
| .count = 4, \ |
| .endpoint = ep, \ |
| .u = { \ |
| .bulk = { \ |
| .buffersize = 39480, \ |
| } \ |
| } \ |
| } |
| |
| struct dvb_usb_device_properties dib0700_devices[] = { |
| { |
| DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 1, |
| .adapter = { |
| { |
| .frontend_attach = stk7700p_frontend_attach, |
| .tuner_attach = stk7700p_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| }, |
| }, |
| |
| .num_device_descs = 6, |
| .devices = { |
| { "DiBcom STK7700P reference design", |
| { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] }, |
| { NULL }, |
| }, |
| { "Hauppauge Nova-T Stick", |
| { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL }, |
| { NULL }, |
| }, |
| { "AVerMedia AVerTV DVB-T Volar", |
| { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] }, |
| { NULL }, |
| }, |
| { "Compro Videomate U500", |
| { &dib0700_usb_id_table[6], NULL }, |
| { NULL }, |
| }, |
| { "Uniwill STK7700P based (Hama and others)", |
| { &dib0700_usb_id_table[7], NULL }, |
| { NULL }, |
| }, |
| { "Leadtek Winfast DTV Dongle (STK7700P based)", |
| { &dib0700_usb_id_table[8], NULL }, |
| { NULL }, |
| } |
| } |
| }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, |
| |
| .num_adapters = 2, |
| .adapter = { |
| { |
| .frontend_attach = bristol_frontend_attach, |
| .tuner_attach = bristol_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x02), |
| }, { |
| .frontend_attach = bristol_frontend_attach, |
| .tuner_attach = bristol_tuner_attach, |
| |
| DIB0700_DEFAULT_STREAMING_CONFIG(0x03), |
| } |
| }, |
| |
| .num_device_descs = 1, |
| .devices = { |
| { "Hauppauge Nova-T 500 Dual DVB-T", |
| { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL }, |
| { NULL }, |
| }, |
| } |
| } |
| }; |
| |
| int dib0700_device_count = ARRAY_SIZE(dib0700_devices); |