Merge branch 'for-james' of git://tpmdd.git.sourceforge.net/gitroot/tpmdd/tpmdd into for-linus
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index 1ff9f14..7dbc664 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -10,6 +10,7 @@
#define __BFIN_ASM_SERIAL_H__
#include <linux/serial_core.h>
+#include <linux/spinlock.h>
#include <mach/anomaly.h>
#include <mach/bfin_serial.h>
@@ -41,6 +42,7 @@
struct circ_buf rx_dma_buf;
struct timer_list rx_dma_timer;
int rx_dma_nrows;
+ spinlock_t rx_lock;
unsigned int tx_dma_channel;
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 5bc765d..8238f89 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -30,6 +30,7 @@
obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
obj-$(CONFIG_SX) += sx.o generic_serial.o
obj-$(CONFIG_RIO) += rio/ generic_serial.o
+obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o
obj-$(CONFIG_RAW_DRIVER) += raw.o
obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o
obj-$(CONFIG_MSPEC) += mspec.o
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index b6ae6e9..7855f9f 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -320,6 +320,7 @@
static int add_smi(struct smi_info *smi);
static int try_smi_init(struct smi_info *smi);
static void cleanup_one_si(struct smi_info *to_clean);
+static void cleanup_ipmi_si(void);
static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
static int register_xaction_notifier(struct notifier_block *nb)
@@ -3450,16 +3451,7 @@
mutex_lock(&smi_infos_lock);
if (unload_when_empty && list_empty(&smi_infos)) {
mutex_unlock(&smi_infos_lock);
-#ifdef CONFIG_PCI
- if (pci_registered)
- pci_unregister_driver(&ipmi_pci_driver);
-#endif
-
-#ifdef CONFIG_PPC_OF
- if (of_registered)
- of_unregister_platform_driver(&ipmi_of_platform_driver);
-#endif
- driver_unregister(&ipmi_driver.driver);
+ cleanup_ipmi_si();
printk(KERN_WARNING PFX
"Unable to find any System Interface(s)\n");
return -ENODEV;
diff --git a/drivers/tty/hvc/virtio_console.c b/drivers/char/virtio_console.c
similarity index 99%
rename from drivers/tty/hvc/virtio_console.c
rename to drivers/char/virtio_console.c
index 239d86f..4903931 100644
--- a/drivers/tty/hvc/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -32,7 +32,7 @@
#include <linux/virtio_console.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
-#include "hvc_console.h"
+#include "../tty/hvc/hvc_console.h"
/*
* This is a global struct for storing common data for all the devices
diff --git a/drivers/isdn/hysdn/hysdn_defs.h b/drivers/isdn/hysdn/hysdn_defs.h
index 729df40..18b801a 100644
--- a/drivers/isdn/hysdn/hysdn_defs.h
+++ b/drivers/isdn/hysdn/hysdn_defs.h
@@ -227,7 +227,6 @@
/*************************/
/* im/exported functions */
/*************************/
-extern char *hysdn_getrev(const char *);
/* hysdn_procconf.c */
extern int hysdn_procconf_init(void); /* init proc config filesys */
@@ -259,7 +258,6 @@
/* hysdn_net.c */
extern unsigned int hynet_enable;
-extern char *hysdn_net_revision;
extern int hysdn_net_create(hysdn_card *); /* create a new net device */
extern int hysdn_net_release(hysdn_card *); /* delete the device */
extern char *hysdn_net_getname(hysdn_card *); /* get name of net interface */
diff --git a/drivers/isdn/hysdn/hysdn_init.c b/drivers/isdn/hysdn/hysdn_init.c
index b7cc5c2..0ab42ac 100644
--- a/drivers/isdn/hysdn/hysdn_init.c
+++ b/drivers/isdn/hysdn/hysdn_init.c
@@ -36,7 +36,6 @@
MODULE_AUTHOR("Werner Cornelius");
MODULE_LICENSE("GPL");
-static char *hysdn_init_revision = "$Revision: 1.6.6.6 $";
static int cardmax; /* number of found cards */
hysdn_card *card_root = NULL; /* pointer to first card */
static hysdn_card *card_last = NULL; /* pointer to first card */
@@ -49,25 +48,6 @@
/* Additionally newer versions may be activated without rebooting. */
/****************************************************************************/
-/******************************************************/
-/* extract revision number from string for log output */
-/******************************************************/
-char *
-hysdn_getrev(const char *revision)
-{
- char *rev;
- char *p;
-
- if ((p = strchr(revision, ':'))) {
- rev = p + 2;
- p = strchr(rev, '$');
- *--p = 0;
- } else
- rev = "???";
- return rev;
-}
-
-
/****************************************************************************/
/* init_module is called once when the module is loaded to do all necessary */
/* things like autodetect... */
@@ -175,13 +155,9 @@
static int __init
hysdn_init(void)
{
- char tmp[50];
int rc;
- strcpy(tmp, hysdn_init_revision);
- printk(KERN_NOTICE "HYSDN: module Rev: %s loaded\n", hysdn_getrev(tmp));
- strcpy(tmp, hysdn_net_revision);
- printk(KERN_NOTICE "HYSDN: network interface Rev: %s \n", hysdn_getrev(tmp));
+ printk(KERN_NOTICE "HYSDN: module loaded\n");
rc = pci_register_driver(&hysdn_pci_driver);
if (rc)
diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c
index feec8d8..11f2cce 100644
--- a/drivers/isdn/hysdn/hysdn_net.c
+++ b/drivers/isdn/hysdn/hysdn_net.c
@@ -26,9 +26,6 @@
unsigned int hynet_enable = 0xffffffff;
module_param(hynet_enable, uint, 0);
-/* store the actual version for log reporting */
-char *hysdn_net_revision = "$Revision: 1.8.6.4 $";
-
#define MAX_SKB_BUFFERS 20 /* number of buffers for keeping TX-data */
/****************************************************************************/
diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c
index 96b3e39..5fe83bd 100644
--- a/drivers/isdn/hysdn/hysdn_procconf.c
+++ b/drivers/isdn/hysdn/hysdn_procconf.c
@@ -23,7 +23,6 @@
#include "hysdn_defs.h"
static DEFINE_MUTEX(hysdn_conf_mutex);
-static char *hysdn_procconf_revision = "$Revision: 1.8.6.4 $";
#define INFO_OUT_LEN 80 /* length of info line including lf */
@@ -404,7 +403,7 @@
card = card->next; /* next entry */
}
- printk(KERN_NOTICE "HYSDN: procfs Rev. %s initialised\n", hysdn_getrev(hysdn_procconf_revision));
+ printk(KERN_NOTICE "HYSDN: procfs initialised\n");
return (0);
} /* hysdn_procconf_init */
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 0c7811f..a179cc6 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -1786,6 +1786,10 @@
spin_lock_bh(&adapter->mcc_lock);
wrb = wrb_from_mccq(adapter);
+ if (!wrb) {
+ status = -EBUSY;
+ goto err;
+ }
req = nonemb_cmd->va;
sge = nonembedded_sgl(wrb);
@@ -1801,6 +1805,7 @@
status = be_mcc_notify_wait(adapter);
+err:
spin_unlock_bh(&adapter->mcc_lock);
return status;
}
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index f40740e..d584d32 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -4276,9 +4276,12 @@
def_q_filters |= BNX2X_ACCEPT_UNICAST | BNX2X_ACCEPT_BROADCAST |
BNX2X_ACCEPT_MULTICAST;
#ifdef BCM_CNIC
- cl_id = bnx2x_fcoe(bp, cl_id);
- bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST |
- BNX2X_ACCEPT_MULTICAST);
+ if (!NO_FCOE(bp)) {
+ cl_id = bnx2x_fcoe(bp, cl_id);
+ bnx2x_rxq_set_mac_filters(bp, cl_id,
+ BNX2X_ACCEPT_UNICAST |
+ BNX2X_ACCEPT_MULTICAST);
+ }
#endif
break;
@@ -4286,18 +4289,29 @@
def_q_filters |= BNX2X_ACCEPT_UNICAST | BNX2X_ACCEPT_BROADCAST |
BNX2X_ACCEPT_ALL_MULTICAST;
#ifdef BCM_CNIC
- cl_id = bnx2x_fcoe(bp, cl_id);
- bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST |
- BNX2X_ACCEPT_MULTICAST);
+ /*
+ * Prevent duplication of multicast packets by configuring FCoE
+ * L2 Client to receive only matched unicast frames.
+ */
+ if (!NO_FCOE(bp)) {
+ cl_id = bnx2x_fcoe(bp, cl_id);
+ bnx2x_rxq_set_mac_filters(bp, cl_id,
+ BNX2X_ACCEPT_UNICAST);
+ }
#endif
break;
case BNX2X_RX_MODE_PROMISC:
def_q_filters |= BNX2X_PROMISCUOUS_MODE;
#ifdef BCM_CNIC
- cl_id = bnx2x_fcoe(bp, cl_id);
- bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST |
- BNX2X_ACCEPT_MULTICAST);
+ /*
+ * Prevent packets duplication by configuring DROP_ALL for FCoE
+ * L2 Client.
+ */
+ if (!NO_FCOE(bp)) {
+ cl_id = bnx2x_fcoe(bp, cl_id);
+ bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_NONE);
+ }
#endif
/* pass management unicast packets as well */
llh_mask |= NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST;
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index c42e972..e54712b 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -185,7 +185,7 @@
static struct can_bittiming_const pch_can_bittiming_const = {
.name = KBUILD_MODNAME,
- .tseg1_min = 1,
+ .tseg1_min = 2,
.tseg1_max = 16,
.tseg2_min = 1,
.tseg2_max = 8,
@@ -959,13 +959,13 @@
struct pch_can_priv *priv = netdev_priv(ndev);
unregister_candev(priv->ndev);
- pci_iounmap(pdev, priv->regs);
if (priv->use_msi)
pci_disable_msi(priv->dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
pch_can_reset(priv);
+ pci_iounmap(pdev, priv->regs);
free_candev(priv->ndev);
}
@@ -1238,6 +1238,7 @@
priv->use_msi = 0;
} else {
netdev_err(ndev, "PCH CAN opened with MSI\n");
+ pci_set_master(pdev);
priv->use_msi = 1;
}
diff --git a/drivers/net/can/softing/softing_cs.c b/drivers/net/can/softing/softing_cs.c
index 300fe75..c11bb4d 100644
--- a/drivers/net/can/softing/softing_cs.c
+++ b/drivers/net/can/softing/softing_cs.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index aed223b..7501d97 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -124,6 +124,7 @@
case M88E1000_I_PHY_ID:
case M88E1011_I_PHY_ID:
case M88E1111_I_PHY_ID:
+ case M88E1118_E_PHY_ID:
hw->phy_type = e1000_phy_m88;
break;
case IGP01E1000_I_PHY_ID:
@@ -3222,7 +3223,8 @@
break;
case e1000_ce4100:
if ((hw->phy_id == RTL8211B_PHY_ID) ||
- (hw->phy_id == RTL8201N_PHY_ID))
+ (hw->phy_id == RTL8201N_PHY_ID) ||
+ (hw->phy_id == M88E1118_E_PHY_ID))
match = true;
break;
case e1000_82541:
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 196eeda..c70b23d 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -2917,6 +2917,7 @@
#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
#define M88E1011_I_REV_4 0x04
#define M88E1111_I_PHY_ID 0x01410CC0
+#define M88E1118_E_PHY_ID 0x01410E40
#define L1LXT971A_PHY_ID 0x001378E0
#define RTL8211B_PHY_ID 0x001CC910
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 1c18f26..3065870 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4309,7 +4309,6 @@
* to get done, so reset controller to flush Tx.
* (Do the reset outside of interrupt context).
*/
- adapter->tx_timeout_count++;
schedule_work(&adapter->reset_task);
/* return immediately since reset is imminent */
return;
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index d5ede2d..ebbda7d 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1370,6 +1370,9 @@
hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr);
hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+
+ /* clear VMDq pool/queue selection for RAR 0 */
+ hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
}
hw->addr_ctrl.overflow_promisc = 0;
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 6342d48..8753980 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -165,7 +165,7 @@
unsigned int thisoff = 0;
unsigned int thislen = 0;
u32 fcbuff, fcdmarw, fcfltrw;
- dma_addr_t addr;
+ dma_addr_t addr = 0;
if (!netdev || !sgl)
return 0;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 602078b..fbae703 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -52,7 +52,7 @@
static const char ixgbe_driver_string[] =
"Intel(R) 10 Gigabit PCI Express Network Driver";
-#define DRV_VERSION "3.0.12-k2"
+#define DRV_VERSION "3.2.9-k2"
const char ixgbe_driver_version[] = DRV_VERSION;
static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation.";
@@ -3176,9 +3176,16 @@
u32 mhadd, hlreg0;
/* Decide whether to use packet split mode or not */
+ /* On by default */
+ adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+
/* Do not use packet split if we're in SR-IOV Mode */
- if (!adapter->num_vfs)
- adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+ if (adapter->num_vfs)
+ adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+
+ /* Disable packet split due to 82599 erratum #45 */
+ if (hw->mac.type == ixgbe_mac_82599EB)
+ adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
/* Set the RX buffer length according to the mode */
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
@@ -4863,16 +4870,13 @@
{
int q_idx, num_q_vectors;
struct ixgbe_q_vector *q_vector;
- int napi_vectors;
int (*poll)(struct napi_struct *, int);
if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
- napi_vectors = adapter->num_rx_queues;
poll = &ixgbe_clean_rxtx_many;
} else {
num_q_vectors = 1;
- napi_vectors = 1;
poll = &ixgbe_poll;
}
diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c
index 47b1573..187b3a1 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ixgbe/ixgbe_sriov.c
@@ -110,12 +110,10 @@
return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
}
-
static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
{
u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
vmolr |= (IXGBE_VMOLR_ROMPE |
- IXGBE_VMOLR_ROPE |
IXGBE_VMOLR_BAM);
if (aupe)
vmolr |= IXGBE_VMOLR_AUPE;
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c
index 3a89239..f2518b0 100644
--- a/drivers/net/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ixgbe/ixgbe_x540.c
@@ -133,17 +133,17 @@
}
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | reset_bit));
IXGBE_WRITE_FLUSH(hw);
/* Poll for reset bit to self-clear indicating reset is complete */
for (i = 0; i < 10; i++) {
udelay(1);
ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- if (!(ctrl & IXGBE_CTRL_RST))
+ if (!(ctrl & reset_bit))
break;
}
- if (ctrl & IXGBE_CTRL_RST) {
+ if (ctrl & reset_bit) {
status = IXGBE_ERR_RESET_FAILED;
hw_dbg(hw, "Reset polling failed to complete.\n");
}
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index 1bf1233..4c9a7d4 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -519,7 +519,9 @@
struct pch_gbe_adapter *adapter;
adapter = container_of(work, struct pch_gbe_adapter, reset_task);
+ rtnl_lock();
pch_gbe_reinit_locked(adapter);
+ rtnl_unlock();
}
/**
@@ -528,14 +530,8 @@
*/
void pch_gbe_reinit_locked(struct pch_gbe_adapter *adapter)
{
- struct net_device *netdev = adapter->netdev;
-
- rtnl_lock();
- if (netif_running(netdev)) {
- pch_gbe_down(adapter);
- pch_gbe_up(adapter);
- }
- rtnl_unlock();
+ pch_gbe_down(adapter);
+ pch_gbe_up(adapter);
}
/**
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 5976d1d..640e368 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1777,6 +1777,7 @@
"cur_rx:%4.4d, dirty_rx:%4.4d\n",
net_dev->name, sis_priv->cur_rx,
sis_priv->dirty_rx);
+ dev_kfree_skb(skb);
break;
}
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 04e8ce1..7113168 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1,7 +1,7 @@
/*
* cdc_ncm.c
*
- * Copyright (C) ST-Ericsson 2010
+ * Copyright (C) ST-Ericsson 2010-2011
* Contact: Alexey Orishko <alexey.orishko@stericsson.com>
* Original author: Hans Petter Selasky <hans.petter.selasky@stericsson.com>
*
@@ -54,7 +54,7 @@
#include <linux/usb/usbnet.h>
#include <linux/usb/cdc.h>
-#define DRIVER_VERSION "17-Jan-2011"
+#define DRIVER_VERSION "7-Feb-2011"
/* CDC NCM subclass 3.2.1 */
#define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10
@@ -77,6 +77,9 @@
*/
#define CDC_NCM_DPT_DATAGRAMS_MAX 32
+/* Maximum amount of IN datagrams in NTB */
+#define CDC_NCM_DPT_DATAGRAMS_IN_MAX 0 /* unlimited */
+
/* Restart the timer, if amount of datagrams is less than given value */
#define CDC_NCM_RESTART_TIMER_DATAGRAM_CNT 3
@@ -85,11 +88,6 @@
(sizeof(struct usb_cdc_ncm_nth16) + sizeof(struct usb_cdc_ncm_ndp16) + \
(CDC_NCM_DPT_DATAGRAMS_MAX + 1) * sizeof(struct usb_cdc_ncm_dpe16))
-struct connection_speed_change {
- __le32 USBitRate; /* holds 3GPP downlink value, bits per second */
- __le32 DSBitRate; /* holds 3GPP uplink value, bits per second */
-} __attribute__ ((packed));
-
struct cdc_ncm_data {
struct usb_cdc_ncm_nth16 nth16;
struct usb_cdc_ncm_ndp16 ndp16;
@@ -198,10 +196,10 @@
{
struct usb_cdc_notification req;
u32 val;
- __le16 max_datagram_size;
u8 flags;
u8 iface_no;
int err;
+ u16 ntb_fmt_supported;
iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber;
@@ -223,6 +221,9 @@
ctx->tx_remainder = le16_to_cpu(ctx->ncm_parm.wNdpOutPayloadRemainder);
ctx->tx_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutDivisor);
ctx->tx_ndp_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutAlignment);
+ /* devices prior to NCM Errata shall set this field to zero */
+ ctx->tx_max_datagrams = le16_to_cpu(ctx->ncm_parm.wNtbOutMaxDatagrams);
+ ntb_fmt_supported = le16_to_cpu(ctx->ncm_parm.bmNtbFormatsSupported);
if (ctx->func_desc != NULL)
flags = ctx->func_desc->bmNetworkCapabilities;
@@ -231,22 +232,58 @@
pr_debug("dwNtbInMaxSize=%u dwNtbOutMaxSize=%u "
"wNdpOutPayloadRemainder=%u wNdpOutDivisor=%u "
- "wNdpOutAlignment=%u flags=0x%x\n",
+ "wNdpOutAlignment=%u wNtbOutMaxDatagrams=%u flags=0x%x\n",
ctx->rx_max, ctx->tx_max, ctx->tx_remainder, ctx->tx_modulus,
- ctx->tx_ndp_modulus, flags);
+ ctx->tx_ndp_modulus, ctx->tx_max_datagrams, flags);
- /* max count of tx datagrams without terminating NULL entry */
- ctx->tx_max_datagrams = CDC_NCM_DPT_DATAGRAMS_MAX;
+ /* max count of tx datagrams */
+ if ((ctx->tx_max_datagrams == 0) ||
+ (ctx->tx_max_datagrams > CDC_NCM_DPT_DATAGRAMS_MAX))
+ ctx->tx_max_datagrams = CDC_NCM_DPT_DATAGRAMS_MAX;
/* verify maximum size of received NTB in bytes */
- if ((ctx->rx_max <
- (CDC_NCM_MIN_HDR_SIZE + CDC_NCM_MIN_DATAGRAM_SIZE)) ||
- (ctx->rx_max > CDC_NCM_NTB_MAX_SIZE_RX)) {
+ if (ctx->rx_max < USB_CDC_NCM_NTB_MIN_IN_SIZE) {
+ pr_debug("Using min receive length=%d\n",
+ USB_CDC_NCM_NTB_MIN_IN_SIZE);
+ ctx->rx_max = USB_CDC_NCM_NTB_MIN_IN_SIZE;
+ }
+
+ if (ctx->rx_max > CDC_NCM_NTB_MAX_SIZE_RX) {
pr_debug("Using default maximum receive length=%d\n",
CDC_NCM_NTB_MAX_SIZE_RX);
ctx->rx_max = CDC_NCM_NTB_MAX_SIZE_RX;
}
+ /* inform device about NTB input size changes */
+ if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) {
+ req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
+ USB_RECIP_INTERFACE;
+ req.bNotificationType = USB_CDC_SET_NTB_INPUT_SIZE;
+ req.wValue = 0;
+ req.wIndex = cpu_to_le16(iface_no);
+
+ if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) {
+ struct usb_cdc_ncm_ndp_input_size ndp_in_sz;
+
+ req.wLength = 8;
+ ndp_in_sz.dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
+ ndp_in_sz.wNtbInMaxDatagrams =
+ cpu_to_le16(CDC_NCM_DPT_DATAGRAMS_MAX);
+ ndp_in_sz.wReserved = 0;
+ err = cdc_ncm_do_request(ctx, &req, &ndp_in_sz, 0, NULL,
+ 1000);
+ } else {
+ __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max);
+
+ req.wLength = 4;
+ err = cdc_ncm_do_request(ctx, &req, &dwNtbInMaxSize, 0,
+ NULL, 1000);
+ }
+
+ if (err)
+ pr_debug("Setting NTB Input Size failed\n");
+ }
+
/* verify maximum size of transmitted NTB in bytes */
if ((ctx->tx_max <
(CDC_NCM_MIN_HDR_SIZE + CDC_NCM_MIN_DATAGRAM_SIZE)) ||
@@ -297,47 +334,84 @@
/* additional configuration */
/* set CRC Mode */
- req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE;
- req.bNotificationType = USB_CDC_SET_CRC_MODE;
- req.wValue = cpu_to_le16(USB_CDC_NCM_CRC_NOT_APPENDED);
- req.wIndex = cpu_to_le16(iface_no);
- req.wLength = 0;
+ if (flags & USB_CDC_NCM_NCAP_CRC_MODE) {
+ req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
+ USB_RECIP_INTERFACE;
+ req.bNotificationType = USB_CDC_SET_CRC_MODE;
+ req.wValue = cpu_to_le16(USB_CDC_NCM_CRC_NOT_APPENDED);
+ req.wIndex = cpu_to_le16(iface_no);
+ req.wLength = 0;
- err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000);
- if (err)
- pr_debug("Setting CRC mode off failed\n");
+ err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000);
+ if (err)
+ pr_debug("Setting CRC mode off failed\n");
+ }
- /* set NTB format */
- req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE;
- req.bNotificationType = USB_CDC_SET_NTB_FORMAT;
- req.wValue = cpu_to_le16(USB_CDC_NCM_NTB16_FORMAT);
- req.wIndex = cpu_to_le16(iface_no);
- req.wLength = 0;
+ /* set NTB format, if both formats are supported */
+ if (ntb_fmt_supported & USB_CDC_NCM_NTH32_SIGN) {
+ req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
+ USB_RECIP_INTERFACE;
+ req.bNotificationType = USB_CDC_SET_NTB_FORMAT;
+ req.wValue = cpu_to_le16(USB_CDC_NCM_NTB16_FORMAT);
+ req.wIndex = cpu_to_le16(iface_no);
+ req.wLength = 0;
- err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000);
- if (err)
- pr_debug("Setting NTB format to 16-bit failed\n");
+ err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000);
+ if (err)
+ pr_debug("Setting NTB format to 16-bit failed\n");
+ }
+
+ ctx->max_datagram_size = CDC_NCM_MIN_DATAGRAM_SIZE;
/* set Max Datagram Size (MTU) */
- req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE;
- req.bNotificationType = USB_CDC_GET_MAX_DATAGRAM_SIZE;
- req.wValue = 0;
- req.wIndex = cpu_to_le16(iface_no);
- req.wLength = cpu_to_le16(2);
+ if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) {
+ __le16 max_datagram_size;
+ u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
- err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, 0, NULL, 1000);
- if (err) {
- pr_debug(" GET_MAX_DATAGRAM_SIZE failed, using size=%u\n",
- CDC_NCM_MIN_DATAGRAM_SIZE);
- /* use default */
- ctx->max_datagram_size = CDC_NCM_MIN_DATAGRAM_SIZE;
- } else {
- ctx->max_datagram_size = le16_to_cpu(max_datagram_size);
+ req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN |
+ USB_RECIP_INTERFACE;
+ req.bNotificationType = USB_CDC_GET_MAX_DATAGRAM_SIZE;
+ req.wValue = 0;
+ req.wIndex = cpu_to_le16(iface_no);
+ req.wLength = cpu_to_le16(2);
- if (ctx->max_datagram_size < CDC_NCM_MIN_DATAGRAM_SIZE)
- ctx->max_datagram_size = CDC_NCM_MIN_DATAGRAM_SIZE;
- else if (ctx->max_datagram_size > CDC_NCM_MAX_DATAGRAM_SIZE)
- ctx->max_datagram_size = CDC_NCM_MAX_DATAGRAM_SIZE;
+ err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, 0, NULL,
+ 1000);
+ if (err) {
+ pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n",
+ CDC_NCM_MIN_DATAGRAM_SIZE);
+ } else {
+ ctx->max_datagram_size = le16_to_cpu(max_datagram_size);
+ /* Check Eth descriptor value */
+ if (eth_max_sz < CDC_NCM_MAX_DATAGRAM_SIZE) {
+ if (ctx->max_datagram_size > eth_max_sz)
+ ctx->max_datagram_size = eth_max_sz;
+ } else {
+ if (ctx->max_datagram_size >
+ CDC_NCM_MAX_DATAGRAM_SIZE)
+ ctx->max_datagram_size =
+ CDC_NCM_MAX_DATAGRAM_SIZE;
+ }
+
+ if (ctx->max_datagram_size < CDC_NCM_MIN_DATAGRAM_SIZE)
+ ctx->max_datagram_size =
+ CDC_NCM_MIN_DATAGRAM_SIZE;
+
+ /* if value changed, update device */
+ req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT |
+ USB_RECIP_INTERFACE;
+ req.bNotificationType = USB_CDC_SET_MAX_DATAGRAM_SIZE;
+ req.wValue = 0;
+ req.wIndex = cpu_to_le16(iface_no);
+ req.wLength = 2;
+ max_datagram_size = cpu_to_le16(ctx->max_datagram_size);
+
+ err = cdc_ncm_do_request(ctx, &req, &max_datagram_size,
+ 0, NULL, 1000);
+ if (err)
+ pr_debug("SET_MAX_DATAGRAM_SIZE failed\n");
+ }
+
}
if (ctx->netdev->mtu != (ctx->max_datagram_size - ETH_HLEN))
@@ -466,19 +540,13 @@
ctx->ether_desc =
(const struct usb_cdc_ether_desc *)buf;
-
dev->hard_mtu =
le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
- if (dev->hard_mtu <
- (CDC_NCM_MIN_DATAGRAM_SIZE - ETH_HLEN))
- dev->hard_mtu =
- CDC_NCM_MIN_DATAGRAM_SIZE - ETH_HLEN;
-
- else if (dev->hard_mtu >
- (CDC_NCM_MAX_DATAGRAM_SIZE - ETH_HLEN))
- dev->hard_mtu =
- CDC_NCM_MAX_DATAGRAM_SIZE - ETH_HLEN;
+ if (dev->hard_mtu < CDC_NCM_MIN_DATAGRAM_SIZE)
+ dev->hard_mtu = CDC_NCM_MIN_DATAGRAM_SIZE;
+ else if (dev->hard_mtu > CDC_NCM_MAX_DATAGRAM_SIZE)
+ dev->hard_mtu = CDC_NCM_MAX_DATAGRAM_SIZE;
break;
case USB_CDC_NCM_TYPE:
@@ -628,13 +696,13 @@
u32 offset;
u32 last_offset;
u16 n = 0;
- u8 timeout = 0;
+ u8 ready2send = 0;
/* if there is a remaining skb, it gets priority */
if (skb != NULL)
swap(skb, ctx->tx_rem_skb);
else
- timeout = 1;
+ ready2send = 1;
/*
* +----------------+
@@ -682,9 +750,10 @@
for (; n < ctx->tx_max_datagrams; n++) {
/* check if end of transmit buffer is reached */
- if (offset >= ctx->tx_max)
+ if (offset >= ctx->tx_max) {
+ ready2send = 1;
break;
-
+ }
/* compute maximum buffer size */
rem = ctx->tx_max - offset;
@@ -711,9 +780,7 @@
}
ctx->tx_rem_skb = skb;
skb = NULL;
-
- /* loop one more time */
- timeout = 1;
+ ready2send = 1;
}
break;
}
@@ -756,7 +823,7 @@
ctx->tx_curr_last_offset = last_offset;
goto exit_no_skb;
- } else if ((n < ctx->tx_max_datagrams) && (timeout == 0)) {
+ } else if ((n < ctx->tx_max_datagrams) && (ready2send == 0)) {
/* wait for more frames */
/* push variables */
ctx->tx_curr_skb = skb_out;
@@ -813,7 +880,7 @@
cpu_to_le16(sizeof(ctx->tx_ncm.nth16));
ctx->tx_ncm.nth16.wSequence = cpu_to_le16(ctx->tx_seq);
ctx->tx_ncm.nth16.wBlockLength = cpu_to_le16(last_offset);
- ctx->tx_ncm.nth16.wFpIndex = ALIGN(sizeof(struct usb_cdc_ncm_nth16),
+ ctx->tx_ncm.nth16.wNdpIndex = ALIGN(sizeof(struct usb_cdc_ncm_nth16),
ctx->tx_ndp_modulus);
memcpy(skb_out->data, &(ctx->tx_ncm.nth16), sizeof(ctx->tx_ncm.nth16));
@@ -825,13 +892,13 @@
rem = sizeof(ctx->tx_ncm.ndp16) + ((ctx->tx_curr_frame_num + 1) *
sizeof(struct usb_cdc_ncm_dpe16));
ctx->tx_ncm.ndp16.wLength = cpu_to_le16(rem);
- ctx->tx_ncm.ndp16.wNextFpIndex = 0; /* reserved */
+ ctx->tx_ncm.ndp16.wNextNdpIndex = 0; /* reserved */
- memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wFpIndex,
+ memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wNdpIndex,
&(ctx->tx_ncm.ndp16),
sizeof(ctx->tx_ncm.ndp16));
- memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wFpIndex +
+ memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wNdpIndex +
sizeof(ctx->tx_ncm.ndp16),
&(ctx->tx_ncm.dpe16),
(ctx->tx_curr_frame_num + 1) *
@@ -961,7 +1028,7 @@
goto error;
}
- temp = le16_to_cpu(ctx->rx_ncm.nth16.wFpIndex);
+ temp = le16_to_cpu(ctx->rx_ncm.nth16.wNdpIndex);
if ((temp + sizeof(ctx->rx_ncm.ndp16)) > actlen) {
pr_debug("invalid DPT16 index\n");
goto error;
@@ -1048,10 +1115,10 @@
static void
cdc_ncm_speed_change(struct cdc_ncm_ctx *ctx,
- struct connection_speed_change *data)
+ struct usb_cdc_speed_change *data)
{
- uint32_t rx_speed = le32_to_cpu(data->USBitRate);
- uint32_t tx_speed = le32_to_cpu(data->DSBitRate);
+ uint32_t rx_speed = le32_to_cpu(data->DLBitRRate);
+ uint32_t tx_speed = le32_to_cpu(data->ULBitRate);
/*
* Currently the USB-NET API does not support reporting the actual
@@ -1092,7 +1159,7 @@
/* test for split data in 8-byte chunks */
if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
cdc_ncm_speed_change(ctx,
- (struct connection_speed_change *)urb->transfer_buffer);
+ (struct usb_cdc_speed_change *)urb->transfer_buffer);
return;
}
@@ -1120,12 +1187,12 @@
break;
case USB_CDC_NOTIFY_SPEED_CHANGE:
- if (urb->actual_length <
- (sizeof(*event) + sizeof(struct connection_speed_change)))
+ if (urb->actual_length < (sizeof(*event) +
+ sizeof(struct usb_cdc_speed_change)))
set_bit(EVENT_STS_SPLIT, &dev->flags);
else
cdc_ncm_speed_change(ctx,
- (struct connection_speed_change *) &event[1]);
+ (struct usb_cdc_speed_change *) &event[1]);
break;
default:
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 90a23e4..82dba5a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -446,6 +446,20 @@
}
}
+static void virtnet_napi_enable(struct virtnet_info *vi)
+{
+ napi_enable(&vi->napi);
+
+ /* If all buffers were filled by other side before we napi_enabled, we
+ * won't get another interrupt, so process any outstanding packets
+ * now. virtnet_poll wants re-enable the queue, so we disable here.
+ * We synchronize against interrupts via NAPI_STATE_SCHED */
+ if (napi_schedule_prep(&vi->napi)) {
+ virtqueue_disable_cb(vi->rvq);
+ __napi_schedule(&vi->napi);
+ }
+}
+
static void refill_work(struct work_struct *work)
{
struct virtnet_info *vi;
@@ -454,7 +468,7 @@
vi = container_of(work, struct virtnet_info, refill.work);
napi_disable(&vi->napi);
still_empty = !try_fill_recv(vi, GFP_KERNEL);
- napi_enable(&vi->napi);
+ virtnet_napi_enable(vi);
/* In theory, this can happen: if we don't get any buffers in
* we will *never* try to fill again. */
@@ -638,16 +652,7 @@
{
struct virtnet_info *vi = netdev_priv(dev);
- napi_enable(&vi->napi);
-
- /* If all buffers were filled by other side before we napi_enabled, we
- * won't get another interrupt, so process any outstanding packets
- * now. virtnet_poll wants re-enable the queue, so we disable here.
- * We synchronize against interrupts via NAPI_STATE_SCHED */
- if (napi_schedule_prep(&vi->napi)) {
- virtqueue_disable_cb(vi->rvq);
- __napi_schedule(&vi->napi);
- }
+ virtnet_napi_enable(vi);
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 3681caf5..23838e3 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -218,6 +218,7 @@
struct ath_buf_state {
u8 bf_type;
u8 bfs_paprd;
+ unsigned long bfs_paprd_timestamp;
enum ath9k_internal_frame_type bfs_ftype;
};
@@ -593,7 +594,6 @@
struct work_struct paprd_work;
struct work_struct hw_check_work;
struct completion paprd_complete;
- bool paprd_pending;
u32 intrstatus;
u32 sc_flags; /* SC_OP_* */
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 9040c2f..da5c645 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -342,7 +342,6 @@
tx_info->control.rates[1].idx = -1;
init_completion(&sc->paprd_complete);
- sc->paprd_pending = true;
txctl.paprd = BIT(chain);
if (ath_tx_start(hw, skb, &txctl) != 0) {
@@ -353,7 +352,6 @@
time_left = wait_for_completion_timeout(&sc->paprd_complete,
msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
- sc->paprd_pending = false;
if (!time_left)
ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CALIBRATE,
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 33a37ed..07b7804 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1725,6 +1725,9 @@
ar9003_hw_set_paprd_txdesc(sc->sc_ah, bf->bf_desc,
bf->bf_state.bfs_paprd);
+ if (txctl->paprd)
+ bf->bf_state.bfs_paprd_timestamp = jiffies;
+
ath_tx_send_normal(sc, txctl->txq, tid, &bf_head);
}
@@ -1886,7 +1889,9 @@
bf->bf_buf_addr = 0;
if (bf->bf_state.bfs_paprd) {
- if (!sc->paprd_pending)
+ if (time_after(jiffies,
+ bf->bf_state.bfs_paprd_timestamp +
+ msecs_to_jiffies(ATH_PAPRD_TIMEOUT)))
dev_kfree_skb_any(skb);
else
complete(&sc->paprd_complete);
diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c
index 939a0e9..84866a4 100644
--- a/drivers/net/wireless/ath/carl9170/rx.c
+++ b/drivers/net/wireless/ath/carl9170/rx.c
@@ -564,7 +564,7 @@
cam = ieee80211_check_tim(tim_ie, tim_len, ar->common.curaid);
/* 2. Maybe the AP wants to send multicast/broadcast data? */
- cam = !!(tim_ie->bitmap_ctrl & 0x01);
+ cam |= !!(tim_ie->bitmap_ctrl & 0x01);
if (!cam) {
/* back to low-power land. */
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index af505bc..ef36aff 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -681,6 +681,8 @@
.fw_name_pre = IWL6050_FW_PRE, \
.ucode_api_max = IWL6050_UCODE_API_MAX, \
.ucode_api_min = IWL6050_UCODE_API_MIN, \
+ .valid_tx_ant = ANT_AB, /* .cfg overwrite */ \
+ .valid_rx_ant = ANT_AB, /* .cfg overwrite */ \
.ops = &iwl6050_ops, \
.eeprom_ver = EEPROM_6050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 36335b1..c1cfd99 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1157,6 +1157,9 @@
/* only Re-enable if disabled by irq */
if (test_bit(STATUS_INT_ENABLED, &priv->status))
iwl_enable_interrupts(priv);
+ /* Re-enable RF_KILL if it occurred */
+ else if (handled & CSR_INT_BIT_RF_KILL)
+ iwl_enable_rfkill_int(priv);
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
@@ -1371,6 +1374,9 @@
/* only Re-enable if disabled by irq */
if (test_bit(STATUS_INT_ENABLED, &priv->status))
iwl_enable_interrupts(priv);
+ /* Re-enable RF_KILL if it occurred */
+ else if (handled & CSR_INT_BIT_RF_KILL)
+ iwl_enable_rfkill_int(priv);
}
/* the threshold ratio of actual_ack_cnt to expected_ack_cnt in percent */
diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c
index 012e1a4..40372ba 100644
--- a/drivers/net/wireless/wl1251/main.c
+++ b/drivers/net/wireless/wl1251/main.c
@@ -1039,6 +1039,9 @@
if (changed & BSS_CHANGED_BEACON) {
beacon = ieee80211_beacon_get(hw, vif);
+ if (!beacon)
+ goto out_sleep;
+
ret = wl1251_cmd_template_set(wl, CMD_BEACON, beacon->data,
beacon->len);
diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c
index c7345db..f853379 100644
--- a/drivers/ssb/pcmcia.c
+++ b/drivers/ssb/pcmcia.c
@@ -733,7 +733,7 @@
/* Fetch the vendor specific tuples. */
res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS,
- ssb_pcmcia_do_get_invariants, sprom);
+ ssb_pcmcia_do_get_invariants, iv);
if ((res == 0) || (res == -ENOSPC))
return 0;
diff --git a/drivers/staging/brcm80211/sys/wl_mac80211.c b/drivers/staging/brcm80211/sys/wl_mac80211.c
index f123588..cd8392b 100644
--- a/drivers/staging/brcm80211/sys/wl_mac80211.c
+++ b/drivers/staging/brcm80211/sys/wl_mac80211.c
@@ -263,9 +263,7 @@
switch (type) {
case NL80211_CHAN_HT20:
case NL80211_CHAN_NO_HT:
- WL_LOCK(wl);
err = wlc_set(wl->wlc, WLC_SET_CHANNEL, chan->hw_value);
- WL_UNLOCK(wl);
break;
case NL80211_CHAN_HT40MINUS:
case NL80211_CHAN_HT40PLUS:
@@ -285,6 +283,7 @@
int err = 0;
int new_int;
+ WL_LOCK(wl);
if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
WL_NONE("%s: Setting listen interval to %d\n",
__func__, conf->listen_interval);
@@ -341,6 +340,7 @@
}
config_out:
+ WL_UNLOCK(wl);
return err;
}
@@ -459,13 +459,21 @@
static void wl_ops_sw_scan_start(struct ieee80211_hw *hw)
{
+ struct wl_info *wl = hw->priv;
WL_NONE("Scan Start\n");
+ WL_LOCK(wl);
+ wlc_scan_start(wl->wlc);
+ WL_UNLOCK(wl);
return;
}
static void wl_ops_sw_scan_complete(struct ieee80211_hw *hw)
{
+ struct wl_info *wl = hw->priv;
WL_NONE("Scan Complete\n");
+ WL_LOCK(wl);
+ wlc_scan_stop(wl->wlc);
+ WL_UNLOCK(wl);
return;
}
diff --git a/drivers/staging/brcm80211/sys/wlc_mac80211.c b/drivers/staging/brcm80211/sys/wlc_mac80211.c
index a130386..e37e805 100644
--- a/drivers/staging/brcm80211/sys/wlc_mac80211.c
+++ b/drivers/staging/brcm80211/sys/wlc_mac80211.c
@@ -8461,3 +8461,16 @@
kfree(qi);
}
+
+/*
+ * Flag 'scan in progress' to withold dynamic phy calibration
+ */
+void wlc_scan_start(struct wlc_info *wlc)
+{
+ wlc_phy_hold_upd(wlc->band->pi, PHY_HOLD_FOR_SCAN, true);
+}
+
+void wlc_scan_stop(struct wlc_info *wlc)
+{
+ wlc_phy_hold_upd(wlc->band->pi, PHY_HOLD_FOR_SCAN, false);
+}
diff --git a/drivers/staging/brcm80211/sys/wlc_pub.h b/drivers/staging/brcm80211/sys/wlc_pub.h
index 146a690..aff4130 100644
--- a/drivers/staging/brcm80211/sys/wlc_pub.h
+++ b/drivers/staging/brcm80211/sys/wlc_pub.h
@@ -570,6 +570,8 @@
extern u16 wlc_rate_shm_offset(struct wlc_info *wlc, u8 rate);
extern u32 wlc_get_rspec_history(struct wlc_bsscfg *cfg);
extern u32 wlc_get_current_highest_rate(struct wlc_bsscfg *cfg);
+extern void wlc_scan_start(struct wlc_info *wlc);
+extern void wlc_scan_stop(struct wlc_info *wlc);
static inline int wlc_iovar_getuint(struct wlc_info *wlc, const char *name,
uint *arg)
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index aad4732..1502d80 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -439,6 +439,7 @@
config COMEDI_NI_ATMIO
tristate "NI AT-MIO E series ISA-PNP card support"
depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON
+ select COMEDI_8255
default N
---help---
Enable support for National Instruments AT-MIO E series cards
@@ -1040,6 +1041,8 @@
config COMEDI_NI_PCIMIO
tristate "NI PCI-MIO-E series and M series support"
depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
+ select COMEDI_8255
+ select COMEDI_FC
default N
---help---
Enable support for National Instruments PCI-MIO-E series and M series
@@ -1164,6 +1167,7 @@
config COMEDI_NI_MIO_CS
tristate "NI DAQCard E series PCMCIA support"
depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
+ select COMEDI_8255
select COMEDI_FC
default N
---help---
@@ -1268,7 +1272,6 @@
config COMEDI_NI_TIO
tristate "NI general purpose counter support"
depends on COMEDI_MITE
- select COMEDI_8255
default N
---help---
Enable support for National Instruments general purpose counters.
diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c
index cd25b24..fd274e9 100644
--- a/drivers/staging/comedi/drivers/mite.c
+++ b/drivers/staging/comedi/drivers/mite.c
@@ -61,8 +61,6 @@
#define PCI_DAQ_SIZE 4096
#define PCI_DAQ_SIZE_660X 8192
-MODULE_LICENSE("GPL");
-
struct mite_struct *mite_devices;
EXPORT_SYMBOL(mite_devices);
diff --git a/drivers/staging/comedi/drivers/ni_6527.c b/drivers/staging/comedi/drivers/ni_6527.c
index 14e716e..54741c9 100644
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -527,3 +527,7 @@
module_init(driver_ni6527_init_module);
module_exit(driver_ni6527_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index 8b8e2aa..403fc09 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -871,3 +871,7 @@
module_init(driver_ni_65xx_init_module);
module_exit(driver_ni_65xx_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c
index 6612b08..ca2aeaa 100644
--- a/drivers/staging/comedi/drivers/ni_660x.c
+++ b/drivers/staging/comedi/drivers/ni_660x.c
@@ -1421,3 +1421,7 @@
};
return 0;
}
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c
index e9f034e..d8d91f9 100644
--- a/drivers/staging/comedi/drivers/ni_670x.c
+++ b/drivers/staging/comedi/drivers/ni_670x.c
@@ -384,3 +384,7 @@
mite_list_devices();
return -EIO;
}
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index 84a15c3..005d2fe 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -1354,3 +1354,7 @@
module_init(driver_pcidio_init_module);
module_exit(driver_pcidio_cleanup_module);
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c
index 23a3812..9148abd 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -1853,3 +1853,7 @@
return 0;
}
+
+MODULE_AUTHOR("Comedi http://www.comedi.org");
+MODULE_DESCRIPTION("Comedi low-level driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c
index 54706a1..b41c964 100644
--- a/drivers/staging/hv/netvsc_drv.c
+++ b/drivers/staging/hv/netvsc_drv.c
@@ -236,6 +236,7 @@
if (status == 1) {
netif_carrier_on(net);
netif_wake_queue(net);
+ netif_notify_peers(net);
} else {
netif_carrier_off(net);
netif_stop_queue(net);
diff --git a/drivers/staging/intel_sst/intelmid_v2_control.c b/drivers/staging/intel_sst/intelmid_v2_control.c
index e38e89d..e2f6d6a 100644
--- a/drivers/staging/intel_sst/intelmid_v2_control.c
+++ b/drivers/staging/intel_sst/intelmid_v2_control.c
@@ -874,7 +874,10 @@
sc_access[3].reg_addr = 0x109;
sc_access[3].mask = MASK6;
sc_access[3].value = 0x00;
- num_val = 4;
+ sc_access[4].reg_addr = 0x104;
+ sc_access[4].value = 0x3C;
+ sc_access[4].mask = 0xff;
+ num_val = 5;
break;
default:
return -EINVAL;
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 5415712..4bd8cbd 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -227,6 +227,7 @@
if (zram_test_flag(zram, index, ZRAM_ZERO)) {
handle_zero_page(page);
+ index++;
continue;
}
@@ -235,12 +236,14 @@
pr_debug("Read before write: sector=%lu, size=%u",
(ulong)(bio->bi_sector), bio->bi_size);
/* Do nothing */
+ index++;
continue;
}
/* Page is stored uncompressed since it's incompressible */
if (unlikely(zram_test_flag(zram, index, ZRAM_UNCOMPRESSED))) {
handle_uncompressed_page(zram, page, index);
+ index++;
continue;
}
@@ -320,6 +323,7 @@
mutex_unlock(&zram->lock);
zram_stat_inc(&zram->stats.pages_zero);
zram_set_flag(zram, index, ZRAM_ZERO);
+ index++;
continue;
}
diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile
index e6bed5f..d79e7e9 100644
--- a/drivers/tty/hvc/Makefile
+++ b/drivers/tty/hvc/Makefile
@@ -10,4 +10,3 @@
obj-$(CONFIG_HVC_IUCV) += hvc_iucv.o
obj-$(CONFIG_HVC_UDBG) += hvc_udbg.o
obj-$(CONFIG_HVCS) += hvcs.o
-obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 44b8412..aa2e5d3 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2414,6 +2414,7 @@
gsm->initiator = c->initiator;
gsm->mru = c->mru;
+ gsm->mtu = c->mtu;
gsm->encoding = c->encapsulation;
gsm->adaption = c->adaption;
gsm->n2 = c->n2;
diff --git a/drivers/tty/serial/68360serial.c b/drivers/tty/serial/68360serial.c
index 88b1335..bc21eea 100644
--- a/drivers/tty/serial/68360serial.c
+++ b/drivers/tty/serial/68360serial.c
@@ -2428,6 +2428,7 @@
/* .read_proc = rs_360_read_proc, */
.tiocmget = rs_360_tiocmget,
.tiocmset = rs_360_tiocmset,
+ .get_icount = rs_360_get_icount,
};
static int __init rs_360_init(void)
diff --git a/drivers/tty/serial/bfin_5xx.c b/drivers/tty/serial/bfin_5xx.c
index e381b89..9b1ff2b 100644
--- a/drivers/tty/serial/bfin_5xx.c
+++ b/drivers/tty/serial/bfin_5xx.c
@@ -370,10 +370,8 @@
{
struct bfin_serial_port *uart = dev_id;
- spin_lock(&uart->port.lock);
while (UART_GET_LSR(uart) & DR)
bfin_serial_rx_chars(uart);
- spin_unlock(&uart->port.lock);
return IRQ_HANDLED;
}
@@ -490,9 +488,8 @@
{
int x_pos, pos;
- dma_disable_irq(uart->tx_dma_channel);
- dma_disable_irq(uart->rx_dma_channel);
- spin_lock_bh(&uart->port.lock);
+ dma_disable_irq_nosync(uart->rx_dma_channel);
+ spin_lock_bh(&uart->rx_lock);
/* 2D DMA RX buffer ring is used. Because curr_y_count and
* curr_x_count can't be read as an atomic operation,
@@ -523,8 +520,7 @@
uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
}
- spin_unlock_bh(&uart->port.lock);
- dma_enable_irq(uart->tx_dma_channel);
+ spin_unlock_bh(&uart->rx_lock);
dma_enable_irq(uart->rx_dma_channel);
mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
@@ -571,7 +567,7 @@
unsigned short irqstat;
int x_pos, pos;
- spin_lock(&uart->port.lock);
+ spin_lock(&uart->rx_lock);
irqstat = get_dma_curr_irqstat(uart->rx_dma_channel);
clear_dma_irqstat(uart->rx_dma_channel);
@@ -589,7 +585,7 @@
uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
}
- spin_unlock(&uart->port.lock);
+ spin_unlock(&uart->rx_lock);
return IRQ_HANDLED;
}
@@ -1332,6 +1328,7 @@
}
#ifdef CONFIG_SERIAL_BFIN_DMA
+ spin_lock_init(&uart->rx_lock);
uart->tx_done = 1;
uart->tx_count = 0;
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index d6ede98..4ab49d4 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1607,6 +1607,7 @@
{ NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 6a95017..e935f71 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1955,7 +1955,6 @@
dev_dbg(&rhdev->dev, "usb %s%s\n",
(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
- clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
if (!hcd->driver->bus_resume)
return -ENOENT;
if (hcd->state == HC_STATE_RUNNING)
@@ -1963,6 +1962,7 @@
hcd->state = HC_STATE_RESUMING;
status = hcd->driver->bus_resume(hcd);
+ clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
if (status == 0) {
/* TRSMRCY = 10 msec */
msleep(10);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4310cc4..d041c68 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2753,6 +2753,11 @@
udev->ttport = hdev->ttport;
} else if (udev->speed != USB_SPEED_HIGH
&& hdev->speed == USB_SPEED_HIGH) {
+ if (!hub->tt.hub) {
+ dev_err(&udev->dev, "parent hub has no TT\n");
+ retval = -EINVAL;
+ goto fail;
+ }
udev->tt = &hub->tt;
udev->ttport = port1;
}
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 06bb9d4..d500996 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -546,6 +546,8 @@
ci13xxx_udc core.
This driver depends on OTG driver for PHY initialization,
clock management, powering up VBUS, and power management.
+ This driver is not supported on boards like trout which
+ has an external PHY.
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "ci13xxx_msm" and force all
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index b5dbb23..6d8e533 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -293,6 +293,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb/composite.h>
#include "gadget_chips.h"
@@ -2763,7 +2764,7 @@
return ERR_PTR(-ENOMEM);
common->free_storage_on_release = 1;
} else {
- memset(common, 0, sizeof common);
+ memset(common, 0, sizeof *common);
common->free_storage_on_release = 0;
}
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index 20d43da..0151185 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -258,7 +258,7 @@
break;
case R8A66597_BULK:
/* isochronous pipes may be used as bulk pipes */
- if (info->pipe > R8A66597_BASE_PIPENUM_BULK)
+ if (info->pipe >= R8A66597_BASE_PIPENUM_BULK)
bufnum = info->pipe - R8A66597_BASE_PIPENUM_BULK;
else
bufnum = info->pipe - R8A66597_BASE_PIPENUM_ISOC;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 24046c0..0e6afa2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -151,6 +151,8 @@
Qualcomm chipsets. Root Hub has inbuilt TT.
This driver depends on OTG driver for PHY initialization,
clock management, powering up VBUS, and power management.
+ This driver is not supported on boards like trout which
+ has an external PHY.
config USB_EHCI_HCD_PPC_OF
bool "EHCI support for PPC USB controller on OF platform bus"
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 2baf8a8..a869e3c 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -227,8 +227,8 @@
* mark HW unaccessible. The PM and USB cores make sure that
* the root hub is either suspended or stopped.
*/
- spin_lock_irqsave(&ehci->lock, flags);
ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
+ spin_lock_irqsave(&ehci->lock, flags);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 796ea0c..8a515f0 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -111,6 +111,7 @@
{
int port;
u32 temp;
+ unsigned long flags;
/* If remote wakeup is enabled for the root hub but disabled
* for the controller, we must adjust all the port wakeup flags
@@ -120,6 +121,8 @@
if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
return;
+ spin_lock_irqsave(&ehci->lock, flags);
+
/* clear phy low-power mode before changing wakeup flags */
if (ehci->has_hostpc) {
port = HCS_N_PORTS(ehci->hcs_params);
@@ -131,7 +134,9 @@
temp = ehci_readl(ehci, hostpc_reg);
ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
}
+ spin_unlock_irqrestore(&ehci->lock, flags);
msleep(5);
+ spin_lock_irqsave(&ehci->lock, flags);
}
port = HCS_N_PORTS(ehci->hcs_params);
@@ -170,6 +175,8 @@
/* Does the root hub have a port wakeup pending? */
if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
}
static int ehci_bus_suspend (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 680f2ef..f784ceb 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -796,7 +796,7 @@
hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
- dev_dbg(&pdev->dev, "failed to create hcd with err %d\n", ret);
+ dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret);
ret = -ENOMEM;
goto err_create_hcd;
}
@@ -864,7 +864,7 @@
ret = omap_start_ehc(omap, hcd);
if (ret) {
- dev_dbg(&pdev->dev, "failed to start ehci\n");
+ dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret);
goto err_start;
}
@@ -879,7 +879,7 @@
ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
if (ret) {
- dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret);
+ dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret);
goto err_add_hcd;
}
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index bed07d4..07bb982 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -367,8 +367,8 @@
* mark HW unaccessible. The PM and USB cores make sure that
* the root hub is either suspended or stopped.
*/
- spin_lock_irqsave (&ehci->lock, flags);
ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
+ spin_lock_irqsave (&ehci->lock, flags);
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 990f06b..2e9602a 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -861,6 +861,7 @@
DBG("dev %d ep%d maxpacket %d\n",
udev->devnum, epnum, ep->maxpacket);
retval = -EINVAL;
+ kfree(ep);
goto fail;
}
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index eeba228..9d49d1c 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -404,6 +404,7 @@
musb->xceiv->set_power = bfin_musb_set_power;
musb->isr = blackfin_interrupt;
+ musb->double_buffer_not_ok = true;
return 0;
}
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 07cf394..54a8bd1 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -128,12 +128,7 @@
static inline struct musb *dev_to_musb(struct device *dev)
{
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- /* usbcore insists dev->driver_data is a "struct hcd *" */
- return hcd_to_musb(dev_get_drvdata(dev));
-#else
return dev_get_drvdata(dev);
-#endif
}
/*-------------------------------------------------------------------------*/
@@ -1876,10 +1871,9 @@
musb = kzalloc(sizeof *musb, GFP_KERNEL);
if (!musb)
return NULL;
- dev_set_drvdata(dev, musb);
#endif
-
+ dev_set_drvdata(dev, musb);
musb->mregs = mbase;
musb->ctrl_base = mbase;
musb->nIrq = -ENODEV;
@@ -2191,7 +2185,7 @@
void __iomem *base;
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!iomem || irq == 0)
+ if (!iomem || irq <= 0)
return -ENODEV;
base = ioremap(iomem->start, resource_size(iomem));
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index d0c236f..d74a811 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -488,6 +488,18 @@
unsigned set_address:1;
unsigned test_mode:1;
unsigned softconnect:1;
+ /*
+ * FIXME: Remove this flag.
+ *
+ * This is only added to allow Blackfin to work
+ * with current driver. For some unknown reason
+ * Blackfin doesn't work with double buffering
+ * and that's enabled by default.
+ *
+ * We added this flag to forcefully disable double
+ * buffering until we get it working.
+ */
+ unsigned double_buffer_not_ok:1 __deprecated;
u8 address;
u8 test_mode_nr;
diff --git a/drivers/usb/musb/musb_dma.h b/drivers/usb/musb/musb_dma.h
index 916065b..3a97c4e 100644
--- a/drivers/usb/musb/musb_dma.h
+++ b/drivers/usb/musb/musb_dma.h
@@ -169,6 +169,9 @@
dma_addr_t dma_addr,
u32 length);
int (*channel_abort)(struct dma_channel *);
+ int (*is_compatible)(struct dma_channel *channel,
+ u16 maxpacket,
+ void *buf, u32 length);
};
/* called after channel_program(), may indicate a fault */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index ed58c6c..2fe3046 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,11 +92,33 @@
/* ----------------------------------------------------------------------- */
+#define is_buffer_mapped(req) (is_dma_capable() && \
+ (req->map_state != UN_MAPPED))
+
/* Maps the buffer to dma */
static inline void map_dma_buffer(struct musb_request *request,
- struct musb *musb)
+ struct musb *musb, struct musb_ep *musb_ep)
{
+ int compatible = true;
+ struct dma_controller *dma = musb->dma_controller;
+
+ request->map_state = UN_MAPPED;
+
+ if (!is_dma_capable() || !musb_ep->dma)
+ return;
+
+ /* Check if DMA engine can handle this request.
+ * DMA code must reject the USB request explicitly.
+ * Default behaviour is to map the request.
+ */
+ if (dma->is_compatible)
+ compatible = dma->is_compatible(musb_ep->dma,
+ musb_ep->packet_sz, request->request.buf,
+ request->request.length);
+ if (!compatible)
+ return;
+
if (request->request.dma == DMA_ADDR_INVALID) {
request->request.dma = dma_map_single(
musb->controller,
@@ -105,7 +127,7 @@
request->tx
? DMA_TO_DEVICE
: DMA_FROM_DEVICE);
- request->mapped = 1;
+ request->map_state = MUSB_MAPPED;
} else {
dma_sync_single_for_device(musb->controller,
request->request.dma,
@@ -113,7 +135,7 @@
request->tx
? DMA_TO_DEVICE
: DMA_FROM_DEVICE);
- request->mapped = 0;
+ request->map_state = PRE_MAPPED;
}
}
@@ -121,11 +143,14 @@
static inline void unmap_dma_buffer(struct musb_request *request,
struct musb *musb)
{
+ if (!is_buffer_mapped(request))
+ return;
+
if (request->request.dma == DMA_ADDR_INVALID) {
DBG(20, "not unmapping a never mapped buffer\n");
return;
}
- if (request->mapped) {
+ if (request->map_state == MUSB_MAPPED) {
dma_unmap_single(musb->controller,
request->request.dma,
request->request.length,
@@ -133,16 +158,15 @@
? DMA_TO_DEVICE
: DMA_FROM_DEVICE);
request->request.dma = DMA_ADDR_INVALID;
- request->mapped = 0;
- } else {
+ } else { /* PRE_MAPPED */
dma_sync_single_for_cpu(musb->controller,
request->request.dma,
request->request.length,
request->tx
? DMA_TO_DEVICE
: DMA_FROM_DEVICE);
-
}
+ request->map_state = UN_MAPPED;
}
/*
@@ -172,8 +196,7 @@
ep->busy = 1;
spin_unlock(&musb->lock);
- if (is_dma_capable() && ep->dma)
- unmap_dma_buffer(req, musb);
+ unmap_dma_buffer(req, musb);
if (request->status == 0)
DBG(5, "%s done request %p, %d/%d\n",
ep->end_point.name, request,
@@ -335,7 +358,7 @@
csr);
#ifndef CONFIG_MUSB_PIO_ONLY
- if (is_dma_capable() && musb_ep->dma) {
+ if (is_buffer_mapped(req)) {
struct dma_controller *c = musb->dma_controller;
size_t request_size;
@@ -436,8 +459,7 @@
* Unmap the dma buffer back to cpu if dma channel
* programming fails
*/
- if (is_dma_capable() && musb_ep->dma)
- unmap_dma_buffer(req, musb);
+ unmap_dma_buffer(req, musb);
musb_write_fifo(musb_ep->hw_ep, fifo_count,
(u8 *) (request->buf + request->actual));
@@ -627,7 +649,7 @@
return;
}
- if (is_cppi_enabled() && musb_ep->dma) {
+ if (is_cppi_enabled() && is_buffer_mapped(req)) {
struct dma_controller *c = musb->dma_controller;
struct dma_channel *channel = musb_ep->dma;
@@ -658,7 +680,7 @@
len = musb_readw(epio, MUSB_RXCOUNT);
if (request->actual < request->length) {
#ifdef CONFIG_USB_INVENTRA_DMA
- if (is_dma_capable() && musb_ep->dma) {
+ if (is_buffer_mapped(req)) {
struct dma_controller *c;
struct dma_channel *channel;
int use_dma = 0;
@@ -742,7 +764,7 @@
fifo_count = min_t(unsigned, len, fifo_count);
#ifdef CONFIG_USB_TUSB_OMAP_DMA
- if (tusb_dma_omap() && musb_ep->dma) {
+ if (tusb_dma_omap() && is_buffer_mapped(req)) {
struct dma_controller *c = musb->dma_controller;
struct dma_channel *channel = musb_ep->dma;
u32 dma_addr = request->dma + request->actual;
@@ -762,7 +784,7 @@
* programming fails. This buffer is mapped if the
* channel allocation is successful
*/
- if (is_dma_capable() && musb_ep->dma) {
+ if (is_buffer_mapped(req)) {
unmap_dma_buffer(req, musb);
/*
@@ -989,7 +1011,11 @@
/* Set TXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
- musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+ if (musb->double_buffer_not_ok)
+ musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
+ else
+ musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz
+ | (musb_ep->hb_mult << 11));
csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
if (musb_readw(regs, MUSB_TXCSR)
@@ -1025,7 +1051,11 @@
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffering mode.
*/
- musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+ if (musb->double_buffer_not_ok)
+ musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_tx);
+ else
+ musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz
+ | (musb_ep->hb_mult << 11));
/* force shared fifo to OUT-only mode */
if (hw_ep->is_shared_fifo) {
@@ -1214,10 +1244,7 @@
request->epnum = musb_ep->current_epnum;
request->tx = musb_ep->is_in;
- if (is_dma_capable() && musb_ep->dma)
- map_dma_buffer(request, musb);
- else
- request->mapped = 0;
+ map_dma_buffer(request, musb, musb_ep);
spin_lock_irqsave(&musb->lock, lockflags);
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index dec8dc0..a55354f 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -35,13 +35,19 @@
#ifndef __MUSB_GADGET_H
#define __MUSB_GADGET_H
+enum buffer_map_state {
+ UN_MAPPED = 0,
+ PRE_MAPPED,
+ MUSB_MAPPED
+};
+
struct musb_request {
struct usb_request request;
struct musb_ep *ep;
struct musb *musb;
u8 tx; /* endpoint direction */
u8 epnum;
- u8 mapped;
+ enum buffer_map_state map_state;
};
static inline struct musb_request *to_musb_request(struct usb_request *req)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 4d5bcb4..0f523d7 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -609,7 +609,7 @@
/* Set RXMAXP with the FIFO size of the endpoint
* to disable double buffer mode.
*/
- if (musb->hwvers < MUSB_HWVERS_2000)
+ if (musb->double_buffer_not_ok)
musb_writew(ep->regs, MUSB_RXMAXP, ep->max_packet_sz_rx);
else
musb_writew(ep->regs, MUSB_RXMAXP,
@@ -784,14 +784,13 @@
/* protocol/endpoint/interval/NAKlimit */
if (epnum) {
musb_writeb(epio, MUSB_TXTYPE, qh->type_reg);
- if (can_bulk_split(musb, qh->type))
+ if (musb->double_buffer_not_ok)
musb_writew(epio, MUSB_TXMAXP,
- packet_sz
- | ((hw_ep->max_packet_sz_tx /
- packet_sz) - 1) << 11);
+ hw_ep->max_packet_sz_tx);
else
musb_writew(epio, MUSB_TXMAXP,
- packet_sz);
+ qh->maxpacket |
+ ((qh->hb_mult - 1) << 11));
musb_writeb(epio, MUSB_TXINTERVAL, qh->intv_reg);
} else {
musb_writeb(epio, MUSB_NAKLIMIT0, qh->intv_reg);
diff --git a/drivers/usb/musb/musbhsdma.h b/drivers/usb/musb/musbhsdma.h
index f763d62..21056c9 100644
--- a/drivers/usb/musb/musbhsdma.h
+++ b/drivers/usb/musb/musbhsdma.h
@@ -94,24 +94,33 @@
{
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_LOW),
- ((u16)((u32) dma_addr & 0xFFFF)));
+ dma_addr);
musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDR_HIGH),
- ((u16)(((u32) dma_addr >> 16) & 0xFFFF)));
+ (dma_addr >> 16));
}
static inline u32 musb_read_hsdma_count(void __iomem *mbase, u8 bchannel)
{
- return musb_readl(mbase,
+ u32 count = musb_readw(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH));
+
+ count = count << 16;
+
+ count |= musb_readw(mbase,
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW));
+
+ return count;
}
static inline void musb_write_hsdma_count(void __iomem *mbase,
u8 bchannel, u32 len)
{
- musb_writel(mbase,
+ musb_writew(mbase,
+ MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_LOW),len);
+ musb_writew(mbase,
MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT_HIGH),
- len);
+ (len >> 16));
}
#endif /* CONFIG_BLACKFIN */
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 9fb875d..9ffc823 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -103,6 +103,8 @@
required after resetting the hardware and power management.
This driver is required even for peripheral only or host only
mode configurations.
+ This driver is not supported on boards like trout which
+ has an external PHY.
config AB8500_USB
tristate "AB8500 USB Transceiver Driver"
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4787c0c..f349a36 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -100,6 +100,7 @@
static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
static int ftdi_NDI_device_setup(struct usb_serial *serial);
+static int ftdi_stmclite_probe(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
@@ -123,6 +124,10 @@
.port_probe = ftdi_HE_TIRA1_setup,
};
+static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
+ .probe = ftdi_stmclite_probe,
+};
+
/*
* The 8U232AM has the same API as the sio except for:
* - it can support MUCH higher baudrates; up to:
@@ -616,6 +621,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+ { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
@@ -810,6 +816,8 @@
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -1709,6 +1717,25 @@
}
/*
+ * First and second port on STMCLiteadaptors is reserved for JTAG interface
+ * and the forth port for pio
+ */
+static int ftdi_stmclite_probe(struct usb_serial *serial)
+{
+ struct usb_device *udev = serial->dev;
+ struct usb_interface *interface = serial->interface;
+
+ dbg("%s", __func__);
+
+ if (interface == udev->actconfig->interface[2])
+ return 0;
+
+ dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+
+ return -ENODEV;
+}
+
+/*
* The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
* We have to correct it if we want to read from it.
*/
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index ed160de..117e8e6 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -518,6 +518,12 @@
#define RATOC_PRODUCT_ID_USB60F 0xb020
/*
+ * Acton Research Corp.
+ */
+#define ACTON_VID 0x0647 /* Vendor ID */
+#define ACTON_SPECTRAPRO_PID 0x0100
+
+/*
* Contec products (http://www.contec.com)
* Submitted by Daniel Sangorrin
*/
@@ -1034,6 +1040,12 @@
#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
/*
+ * STMicroelectonics
+ */
+#define ST_VID 0x0483
+#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */
+
+/*
* Papouch products (http://www.papouch.com/)
* Submitted by Folkert van Heusden
*/
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index cd769ef..3b246d9 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2889,8 +2889,8 @@
dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
- edge_serial->product_info.FirmwareMajorVersion = fw->data[0];
- edge_serial->product_info.FirmwareMinorVersion = fw->data[1];
+ edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
+ edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
for (rec = ihex_next_binrec(rec); rec;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index b2902f3..a910004 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -369,9 +369,9 @@
static void __exit ti_exit(void)
{
+ usb_deregister(&ti_usb_driver);
usb_serial_deregister(&ti_1port_device);
usb_serial_deregister(&ti_2port_device);
- usb_deregister(&ti_usb_driver);
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 24bd5d7..c1602b8 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1397,6 +1397,13 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Submitted by Nick Holloway */
+UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100,
+ "VTech",
+ "Kidizoom",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
@@ -1890,6 +1897,13 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
+/* Reported by Jasper Mackenzie <scarletpimpernal@hotmail.com> */
+UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
+ "Coby Electronics",
+ "MP3 Player",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
+
UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
"ST",
"2A",
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index 5e86dc7..81a9279 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -89,7 +89,7 @@
#define USB_CDC_COMM_FEATURE 0x01
#define USB_CDC_CAP_LINE 0x02
-#define USB_CDC_CAP_BRK 0x04
+#define USB_CDC_CAP_BRK 0x04
#define USB_CDC_CAP_NOTIFY 0x08
/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */
@@ -271,6 +271,11 @@
__le16 wLength;
} __attribute__ ((packed));
+struct usb_cdc_speed_change {
+ __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */
+ __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */
+} __attribute__ ((packed));
+
/*-------------------------------------------------------------------------*/
/*
@@ -292,7 +297,7 @@
__le16 wNdpOutDivisor;
__le16 wNdpOutPayloadRemainder;
__le16 wNdpOutAlignment;
- __le16 wPadding2;
+ __le16 wNtbOutMaxDatagrams;
} __attribute__ ((packed));
/*
@@ -307,7 +312,7 @@
__le16 wHeaderLength;
__le16 wSequence;
__le16 wBlockLength;
- __le16 wFpIndex;
+ __le16 wNdpIndex;
} __attribute__ ((packed));
struct usb_cdc_ncm_nth32 {
@@ -315,7 +320,7 @@
__le16 wHeaderLength;
__le16 wSequence;
__le32 dwBlockLength;
- __le32 dwFpIndex;
+ __le32 dwNdpIndex;
} __attribute__ ((packed));
/*
@@ -337,7 +342,7 @@
struct usb_cdc_ncm_ndp16 {
__le32 dwSignature;
__le16 wLength;
- __le16 wNextFpIndex;
+ __le16 wNextNdpIndex;
struct usb_cdc_ncm_dpe16 dpe16[0];
} __attribute__ ((packed));
@@ -375,6 +380,7 @@
#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2)
#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3)
#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4)
+#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5)
/* CDC NCM subclass Table 6-3: NTB Parameter Structure */
#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0)
@@ -392,6 +398,13 @@
#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048
#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048
+/* NTB Input Size Structure */
+struct usb_cdc_ncm_ndp_input_size {
+ __le32 dwNtbInMaxSize;
+ __le16 wNtbInMaxDatagrams;
+ __le16 wReserved;
+} __attribute__ ((packed));
+
/* CDC NCM subclass 6.2.11 SetCrcMode */
#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00
#define USB_CDC_NCM_CRC_APPENDED 0x01
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
index b92e173..7d1babb 100644
--- a/include/linux/usb/msm_hsusb_hw.h
+++ b/include/linux/usb/msm_hsusb_hw.h
@@ -16,12 +16,8 @@
#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
#define __LINUX_USB_GADGET_MSM72K_UDC_H__
-#ifdef CONFIG_ARCH_MSM7X00A
-#define USB_SBUSCFG (MSM_USB_BASE + 0x0090)
-#else
#define USB_AHBBURST (MSM_USB_BASE + 0x0090)
#define USB_AHBMODE (MSM_USB_BASE + 0x0098)
-#endif
#define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */
#define USB_USBCMD (MSM_USB_BASE + 0x0140)
diff --git a/init/calibrate.c b/init/calibrate.c
index 6eb48e5..24fe022 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -66,7 +66,7 @@
pre_start = 0;
read_current_timer(&start);
start_jiffies = jiffies;
- while (jiffies <= (start_jiffies + 1)) {
+ while (time_before_eq(jiffies, start_jiffies + 1)) {
pre_start = start;
read_current_timer(&start);
}
@@ -74,8 +74,8 @@
pre_end = 0;
end = post_start;
- while (jiffies <=
- (start_jiffies + 1 + DELAY_CALIBRATION_TICKS)) {
+ while (time_before_eq(jiffies, start_jiffies + 1 +
+ DELAY_CALIBRATION_TICKS)) {
pre_end = end;
read_current_timer(&end);
}
diff --git a/kernel/printk.c b/kernel/printk.c
index 2ddbdc7..3623152 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -262,25 +262,47 @@
int dmesg_restrict;
#endif
+static int syslog_action_restricted(int type)
+{
+ if (dmesg_restrict)
+ return 1;
+ /* Unless restricted, we allow "read all" and "get buffer size" for everybody */
+ return type != SYSLOG_ACTION_READ_ALL && type != SYSLOG_ACTION_SIZE_BUFFER;
+}
+
+static int check_syslog_permissions(int type, bool from_file)
+{
+ /*
+ * If this is from /proc/kmsg and we've already opened it, then we've
+ * already done the capabilities checks at open time.
+ */
+ if (from_file && type != SYSLOG_ACTION_OPEN)
+ return 0;
+
+ if (syslog_action_restricted(type)) {
+ if (capable(CAP_SYSLOG))
+ return 0;
+ /* For historical reasons, accept CAP_SYS_ADMIN too, with a warning */
+ if (capable(CAP_SYS_ADMIN)) {
+ WARN_ONCE(1, "Attempt to access syslog with CAP_SYS_ADMIN "
+ "but no CAP_SYSLOG (deprecated).\n");
+ return 0;
+ }
+ return -EPERM;
+ }
+ return 0;
+}
+
int do_syslog(int type, char __user *buf, int len, bool from_file)
{
unsigned i, j, limit, count;
int do_clear = 0;
char c;
- int error = 0;
+ int error;
- /*
- * If this is from /proc/kmsg we only do the capabilities checks
- * at open time.
- */
- if (type == SYSLOG_ACTION_OPEN || !from_file) {
- if (dmesg_restrict && !capable(CAP_SYSLOG))
- goto warn; /* switch to return -EPERM after 2.6.39 */
- if ((type != SYSLOG_ACTION_READ_ALL &&
- type != SYSLOG_ACTION_SIZE_BUFFER) &&
- !capable(CAP_SYSLOG))
- goto warn; /* switch to return -EPERM after 2.6.39 */
- }
+ error = check_syslog_permissions(type, from_file);
+ if (error)
+ goto out;
error = security_syslog(type);
if (error)
@@ -423,12 +445,6 @@
}
out:
return error;
-warn:
- /* remove after 2.6.39 */
- if (capable(CAP_SYS_ADMIN))
- WARN_ONCE(1, "Attempt to access syslog with CAP_SYS_ADMIN "
- "but no CAP_SYSLOG (deprecated and denied).\n");
- return -EPERM;
}
SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
diff --git a/net/batman-adv/unicast.c b/net/batman-adv/unicast.c
index ee41fef..d1a6113 100644
--- a/net/batman-adv/unicast.c
+++ b/net/batman-adv/unicast.c
@@ -50,12 +50,12 @@
skb = tfp->skb;
}
+ if (skb_linearize(skb) < 0 || skb_linearize(tmp_skb) < 0)
+ goto err;
+
skb_pull(tmp_skb, sizeof(struct unicast_frag_packet));
- if (pskb_expand_head(skb, 0, tmp_skb->len, GFP_ATOMIC) < 0) {
- /* free buffered skb, skb will be freed later */
- kfree_skb(tfp->skb);
- return NULL;
- }
+ if (pskb_expand_head(skb, 0, tmp_skb->len, GFP_ATOMIC) < 0)
+ goto err;
/* move free entry to end */
tfp->skb = NULL;
@@ -70,6 +70,11 @@
unicast_packet->packet_type = BAT_UNICAST;
return skb;
+
+err:
+ /* free buffered skb, skb will be freed later */
+ kfree_skb(tfp->skb);
+ return NULL;
}
static void frag_create_entry(struct list_head *head, struct sk_buff *skb)
diff --git a/net/caif/chnl_net.c b/net/caif/chnl_net.c
index fa9dab3..6008d6d 100644
--- a/net/caif/chnl_net.c
+++ b/net/caif/chnl_net.c
@@ -394,9 +394,7 @@
priv->conn_req.sockaddr.u.dgm.connection_id = -1;
priv->flowenabled = false;
- ASSERT_RTNL();
init_waitqueue_head(&priv->netmgmt_wq);
- list_add(&priv->list_field, &chnl_net_list);
}
@@ -453,6 +451,8 @@
ret = register_netdevice(dev);
if (ret)
pr_warn("device rtml registration failed\n");
+ else
+ list_add(&caifdev->list_field, &chnl_net_list);
return ret;
}
diff --git a/net/core/dev.c b/net/core/dev.c
index b6d0bf8..8e726cb 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5660,18 +5660,6 @@
dev_net_set(dev, &init_net);
- dev->num_tx_queues = txqs;
- dev->real_num_tx_queues = txqs;
- if (netif_alloc_netdev_queues(dev))
- goto free_pcpu;
-
-#ifdef CONFIG_RPS
- dev->num_rx_queues = rxqs;
- dev->real_num_rx_queues = rxqs;
- if (netif_alloc_rx_queues(dev))
- goto free_pcpu;
-#endif
-
dev->gso_max_size = GSO_MAX_SIZE;
INIT_LIST_HEAD(&dev->ethtool_ntuple_list.list);
@@ -5681,9 +5669,26 @@
INIT_LIST_HEAD(&dev->link_watch_list);
dev->priv_flags = IFF_XMIT_DST_RELEASE;
setup(dev);
+
+ dev->num_tx_queues = txqs;
+ dev->real_num_tx_queues = txqs;
+ if (netif_alloc_netdev_queues(dev))
+ goto free_all;
+
+#ifdef CONFIG_RPS
+ dev->num_rx_queues = rxqs;
+ dev->real_num_rx_queues = rxqs;
+ if (netif_alloc_rx_queues(dev))
+ goto free_all;
+#endif
+
strcpy(dev->name, name);
return dev;
+free_all:
+ free_netdev(dev);
+ return NULL;
+
free_pcpu:
free_percpu(dev->pcpu_refcnt);
kfree(dev->_tx);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 4bc8a92..9cd73b1 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1822,6 +1822,7 @@
*cookie ^= 2;
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN;
local->hw_roc_skb = skb;
+ local->hw_roc_skb_for_status = skb;
mutex_unlock(&local->mtx);
return 0;
@@ -1875,6 +1876,7 @@
if (ret == 0) {
kfree_skb(local->hw_roc_skb);
local->hw_roc_skb = NULL;
+ local->hw_roc_skb_for_status = NULL;
}
mutex_unlock(&local->mtx);
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index c47d7c0..533fd32 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -953,7 +953,7 @@
struct ieee80211_channel *hw_roc_channel;
struct net_device *hw_roc_dev;
- struct sk_buff *hw_roc_skb;
+ struct sk_buff *hw_roc_skb, *hw_roc_skb_for_status;
struct work_struct hw_roc_start, hw_roc_done;
enum nl80211_channel_type hw_roc_channel_type;
unsigned int hw_roc_duration;
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 38a7972..071ac95 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -323,6 +323,7 @@
if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX) {
struct ieee80211_work *wk;
+ u64 cookie = (unsigned long)skb;
rcu_read_lock();
list_for_each_entry_rcu(wk, &local->work_list, list) {
@@ -334,8 +335,12 @@
break;
}
rcu_read_unlock();
+ if (local->hw_roc_skb_for_status == skb) {
+ cookie = local->hw_roc_cookie ^ 2;
+ local->hw_roc_skb_for_status = NULL;
+ }
cfg80211_mgmt_tx_status(
- skb->dev, (unsigned long) skb, skb->data, skb->len,
+ skb->dev, cookie, skb->data, skb->len,
!!(info->flags & IEEE80211_TX_STAT_ACK), GFP_ATOMIC);
}
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index b64b42b..b0beaa5 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1547,7 +1547,7 @@
skb_orphan(skb);
}
- if (skb_header_cloned(skb))
+ if (skb_cloned(skb))
I802_DEBUG_INC(local->tx_expand_skb_head_cloned);
else if (head_need || tail_need)
I802_DEBUG_INC(local->tx_expand_skb_head);
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index e615119..84f4fcc 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -942,8 +942,15 @@
if (set_reply && !test_and_set_bit(IPS_SEEN_REPLY_BIT, &ct->status))
nf_conntrack_event_cache(IPCT_REPLY, ct);
out:
- if (tmpl)
- nf_ct_put(tmpl);
+ if (tmpl) {
+ /* Special case: we have to repeat this hook, assign the
+ * template again to this packet. We assume that this packet
+ * has no conntrack assigned. This is used by nf_ct_tcp. */
+ if (ret == NF_REPEAT)
+ skb->nfct = (struct nf_conntrack *)tmpl;
+ else
+ nf_ct_put(tmpl);
+ }
return ret;
}
diff --git a/net/x25/x25_facilities.c b/net/x25/x25_facilities.c
index 55187c8..4062075 100644
--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -27,9 +27,19 @@
#include <net/sock.h>
#include <net/x25.h>
-/*
- * Parse a set of facilities into the facilities structures. Unrecognised
- * facilities are written to the debug log file.
+/**
+ * x25_parse_facilities - Parse facilities from skb into the facilities structs
+ *
+ * @skb: sk_buff to parse
+ * @facilities: Regular facilites, updated as facilities are found
+ * @dte_facs: ITU DTE facilities, updated as DTE facilities are found
+ * @vc_fac_mask: mask is updated with all facilities found
+ *
+ * Return codes:
+ * -1 - Parsing error, caller should drop call and clean up
+ * 0 - Parse OK, this skb has no facilities
+ * >0 - Parse OK, returns the length of the facilities header
+ *
*/
int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
struct x25_dte_facilities *dte_facs, unsigned long *vc_fac_mask)
@@ -62,7 +72,7 @@
switch (*p & X25_FAC_CLASS_MASK) {
case X25_FAC_CLASS_A:
if (len < 2)
- return 0;
+ return -1;
switch (*p) {
case X25_FAC_REVERSE:
if((p[1] & 0x81) == 0x81) {
@@ -107,7 +117,7 @@
break;
case X25_FAC_CLASS_B:
if (len < 3)
- return 0;
+ return -1;
switch (*p) {
case X25_FAC_PACKET_SIZE:
facilities->pacsize_in = p[1];
@@ -130,7 +140,7 @@
break;
case X25_FAC_CLASS_C:
if (len < 4)
- return 0;
+ return -1;
printk(KERN_DEBUG "X.25: unknown facility %02X, "
"values %02X, %02X, %02X\n",
p[0], p[1], p[2], p[3]);
@@ -139,18 +149,18 @@
break;
case X25_FAC_CLASS_D:
if (len < p[1] + 2)
- return 0;
+ return -1;
switch (*p) {
case X25_FAC_CALLING_AE:
if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
- return 0;
+ return -1;
dte_facs->calling_len = p[2];
memcpy(dte_facs->calling_ae, &p[3], p[1] - 1);
*vc_fac_mask |= X25_MASK_CALLING_AE;
break;
case X25_FAC_CALLED_AE:
if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
- return 0;
+ return -1;
dte_facs->called_len = p[2];
memcpy(dte_facs->called_ae, &p[3], p[1] - 1);
*vc_fac_mask |= X25_MASK_CALLED_AE;
diff --git a/net/x25/x25_in.c b/net/x25/x25_in.c
index f729f02..15de65f 100644
--- a/net/x25/x25_in.c
+++ b/net/x25/x25_in.c
@@ -91,10 +91,10 @@
{
struct x25_address source_addr, dest_addr;
int len;
+ struct x25_sock *x25 = x25_sk(sk);
switch (frametype) {
case X25_CALL_ACCEPTED: {
- struct x25_sock *x25 = x25_sk(sk);
x25_stop_timer(sk);
x25->condition = 0x00;
@@ -113,14 +113,16 @@
&dest_addr);
if (len > 0)
skb_pull(skb, len);
+ else if (len < 0)
+ goto out_clear;
len = x25_parse_facilities(skb, &x25->facilities,
&x25->dte_facilities,
&x25->vc_facil_mask);
if (len > 0)
skb_pull(skb, len);
- else
- return -1;
+ else if (len < 0)
+ goto out_clear;
/*
* Copy any Call User Data.
*/
@@ -144,6 +146,12 @@
}
return 0;
+
+out_clear:
+ x25_write_internal(sk, X25_CLEAR_REQUEST);
+ x25->state = X25_STATE_2;
+ x25_start_t23timer(sk);
+ return 0;
}
/*
diff --git a/net/x25/x25_link.c b/net/x25/x25_link.c
index 4cbc942..2130692 100644
--- a/net/x25/x25_link.c
+++ b/net/x25/x25_link.c
@@ -396,9 +396,12 @@
write_lock_bh(&x25_neigh_list_lock);
list_for_each_safe(entry, tmp, &x25_neigh_list) {
+ struct net_device *dev;
+
nb = list_entry(entry, struct x25_neigh, node);
+ dev = nb->dev;
__x25_remove_neigh(nb);
- dev_put(nb->dev);
+ dev_put(dev);
}
write_unlock_bh(&x25_neigh_list_lock);
}
diff --git a/scripts/package/builddeb b/scripts/package/builddeb
index b0b2357..f6cbc3d 100644
--- a/scripts/package/builddeb
+++ b/scripts/package/builddeb
@@ -238,12 +238,12 @@
fi
# Build header package
-find . -name Makefile -o -name Kconfig\* -o -name \*.pl > /tmp/files$$
-find arch/x86/include include scripts -type f >> /tmp/files$$
+(cd $srctree; find . -name Makefile -o -name Kconfig\* -o -name \*.pl > /tmp/files$$)
+(cd $srctree; find arch/$SRCARCH/include include scripts -type f >> /tmp/files$$)
(cd $objtree; find .config Module.symvers include scripts -type f >> /tmp/objfiles$$)
destdir=$kernel_headers_dir/usr/src/linux-headers-$version
mkdir -p "$destdir"
-tar -c -f - -T /tmp/files$$ | (cd $destdir; tar -xf -)
+(cd $srctree; tar -c -f - -T /tmp/files$$) | (cd $destdir; tar -xf -)
(cd $objtree; tar -c -f - -T /tmp/objfiles$$) | (cd $destdir; tar -xf -)
rm -f /tmp/files$$ /tmp/objfiles$$
arch=$(dpkg --print-architecture)