dl2k: add Sundance/Tamarack TC902x Gigabit Ethernet Adapter support
Actually, D-Link modified the VendorID/ProductID of the TC902x.
The TC902x is the original chipset.
Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 502dd0e..eeac2f4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1995,14 +1995,15 @@
The safe and default value for this is N.
config DL2K
- tristate "D-Link DL2000-based Gigabit Ethernet support"
+ tristate "DL2000/TC902x-based Gigabit Ethernet support"
depends on PCI
select CRC32
help
- This driver supports D-Link 2000-based gigabit ethernet cards, which
- includes
+ This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+ which includes
D-Link DGE-550T Gigabit Ethernet Adapter.
D-Link DL2000-based Gigabit Ethernet Adapter.
+ Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
To compile this driver as a module, choose M here: the
module will be called dl2k.
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 04e3710..ca21a18 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -10,9 +10,9 @@
(at your option) any later version.
*/
-#define DRV_NAME "D-Link DL2000-based linux driver"
-#define DRV_VERSION "v1.18"
-#define DRV_RELDATE "2006/06/27"
+#define DRV_NAME "DL2000/TC902x-based linux driver"
+#define DRV_VERSION "v1.19"
+#define DRV_RELDATE "2007/08/12"
#include "dl2k.h"
#include <linux/dma-mapping.h>
@@ -339,17 +339,24 @@
#ifdef MEM_MAPPING
ioaddr = dev->base_addr;
#endif
- /* Check CRC */
- crc = ~ether_crc_le (256 - 4, sromdata);
- if (psrom->crc != crc) {
- printk (KERN_ERR "%s: EEPROM data CRC error.\n", dev->name);
- return -1;
+ if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) { /* D-Link Only */
+ /* Check CRC */
+ crc = ~ether_crc_le (256 - 4, sromdata);
+ if (psrom->crc != crc) {
+ printk (KERN_ERR "%s: EEPROM data CRC error.\n",
+ dev->name);
+ return -1;
+ }
}
/* Set MAC address */
for (i = 0; i < 6; i++)
dev->dev_addr[i] = psrom->mac_addr[i];
+ if (np->pdev->vendor != PCI_VENDOR_ID_DLINK) {
+ return 0;
+ }
+
/* Parse Software Information Block */
i = 0x30;
psib = (u8 *) sromdata;
diff --git a/drivers/net/dl2k.h b/drivers/net/dl2k.h
index e443065..5b80177 100644
--- a/drivers/net/dl2k.h
+++ b/drivers/net/dl2k.h
@@ -692,6 +692,7 @@
static const struct pci_device_id rio_pci_tbl[] = {
{0x1186, 0x4000, PCI_ANY_ID, PCI_ANY_ID, },
+ {0x13f0, 0x1021, PCI_ANY_ID, PCI_ANY_ID, },
{ }
};
MODULE_DEVICE_TABLE (pci, rio_pci_tbl);