blob: e86628657a3eb15877bce19b9f83f3b1d4beef1a [file] [log] [blame]
/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/*
* Only 8926-specific property overrides should be placed inside this
* file. Device definitions should be placed inside the msm8226.dtsi
* file.
*/
/include/ "msm8226.dtsi"
/include/ "msm8226-v2-pm.dtsi"
/ {
model = "Qualcomm MSM 8926";
compatible = "qcom,msm8926";
};
&soc {
qcom,mss@fc880000 {
reg = <0xfc880000 0x100>,
<0xfd485000 0x400>,
<0xfc820000 0x20>,
<0xfc401680 0x4>;
reg-names = "qdsp6_base", "halt_base", "rmb_base",
"restart_reg";
vdd_mss-supply = <&pm8226_s5>;
};
qcom,clock-a7@f9011050 {
reg = <0xf9011050 0x8>,
<0xfc4b80b0 0x8>;
reg-names = "rcg-base", "efuse";
qcom,speed0-bin-v0 =
< 0 0>,
< 384000000 2>,
< 787200000 4>,
<1190400000 7>;
qcom,speed0-bin-v1 =
< 0 0>,
< 384000000 2>,
< 787200000 4>,
<1190400000 7>;
qcom,speed2-bin-v1 =
< 0 0>,
< 384000000 2>,
< 787200000 4>,
<1401600000 10>;
qcom,speed1-bin-v1 =
< 0 0>,
< 384000000 2>,
< 787200000 4>,
< 998400000 5>,
<1094400000 6>,
<1190400000 7>,
<1305600000 8>,
<1344000000 9>,
<1401600000 10>,
<1497600000 11>,
<1593600000 12>;
qcom,speed5-bin-v1 =
< 0 0>,
< 384000000 2>,
< 787200000 4>,
< 998400000 5>,
<1094400000 6>,
<1190400000 7>,
<1305600000 8>,
<1344000000 9>,
<1401600000 10>,
<1497600000 11>,
<1593600000 12>,
<1689600000 13>,
<1785600000 14>;
};
qcom,msm-thermal {
qcom,cpu-sensors = "tsens_tz_sensor5", "tsens_tz_sensor5",
"tsens_tz_sensor1", "tsens_tz_sensor1";
};
qcom,mpm@fc4281d0 {
qcom,gpio-map = <3 1>,
<4 4 >,
<5 5 >,
<6 9 >,
<7 13>,
<8 17>,
<9 21>,
<10 27>,
<11 29>,
<12 31>,
<13 33>,
<14 35>,
<15 37>,
<16 38>,
<17 39>,
<18 41>,
<19 46>,
<20 48>,
<21 49>,
<22 50>,
<23 51>,
<24 52>,
<25 54>,
<26 62>,
<27 63>,
<28 64>,
<29 65>,
<30 66>,
<31 67>,
<32 68>,
<33 69>,
<34 71>,
<35 72>,
<36 106>,
<37 107>,
<38 108>,
<39 109>,
<40 110>,
<41 119>,
<54 111>,
<55 113>;
};
};
&apc_vreg_corner {
qcom,cpr-up-threshold = <0>;
qcom,cpr-down-threshold = <2>;
regulator-min-microvolt = <1>;
regulator-max-microvolt = <14>;
qcom,cpr-corner-map = <1 1 2 2 3 3 3 3 3 3 3 3 3 3>;
qcom,cpr-quotient-adjustment = <0 72 72>;
qcom,pvs-version-fuse-sel = <22 4 2 0>;
qcom,cpr-corner-frequency-map =
<1 300000000>,
<2 384000000>,
<3 600000000>,
<4 787200000>,
<5 998400000>,
<6 1094400000>,
<7 1190400000>,
<8 1305600000>,
<9 1344000000>,
<10 1401600000>,
<11 1497600000>,
<12 1593600000>,
<13 1689600000>,
<14 1785600000>;
qcom,cpr-speed-bin-max-corners =
<0 1 2 4 7>,
<1 1 2 4 12>,
<2 1 2 4 10>,
<5 1 2 4 14>;
qcom,cpr-quot-adjust-scaling-factor-max = <650>;
};
&tsens {
qcom,sensors = <6>;
qcom,slope = <2901 2846 3038 2955 2901 2846>;
};
&msmgpio {
ngpio = <121>;
};
&memory_hole {
qcom,memblock-remove = <0x08000000 0x7500000
0x0fa00000 0x500000>; /* Address and size of the hole */
};
&hsic_host {
interrupt-map = <0 &intc 0 136 0
1 &intc 0 148 0
2 &msmgpio 119 0x8>;
hsic,strobe-gpio = <&msmgpio 119 0x00>;
hsic,data-gpio = <&msmgpio 120 0x00>;
};
&usb_otg {
/delete-property/ qcom,hsusb-otg-disable-reset;
qcom,ahb-async-bridge-bypass;
};