drivers/usb/misc/Kconfig - kernel/msm - Gitiles

 #
 # USB Miscellaneous driver configuration
 #
 comment "USB Miscellaneous drivers"
 	depends on USB

 config USB_EMI62
 	tristate "EMI 6|2m USB Audio interface support"
 	depends on USB
 	---help---
 	  This driver loads firmware to Emagic EMI 6|2m low latency USB
 	  Audio and Midi interface.

 	  After firmware load the device is handled with standard linux
 	  USB Audio driver.

 	  This code is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
 	  The module will be called audio. If you want to compile it as a
 	  module, say M here and read <file:Documentation/kbuild/modules.txt>.

 config USB_EMI26
 	tristate "EMI 2|6 USB Audio interface support"
 	depends on USB
 	---help---
 	  This driver loads firmware to Emagic EMI 2|6 low latency USB
 	  Audio interface.

 	  After firmware load the device is handled with standard linux
 	  USB Audio driver.

 	  To compile this driver as a module, choose M here: the
 	  module will be called emi26.

 config USB_ADUTUX
 	tristate "ADU devices from Ontrak Control Systems"
 	depends on USB
 	help
 	  Say Y if you want to use an ADU device from Ontrak Control
 	  Systems.

 	  To compile this driver as a module, choose M here.  The module
 	  will be called adutux.

 config USB_AUERSWALD
 	tristate "USB Auerswald ISDN support"
 	depends on USB
 	help
 	  Say Y here if you want to connect an Auerswald USB ISDN Device
 	  to your computer's USB port.

 	  To compile this driver as a module, choose M here: the
 	  module will be called auerswald.

 config USB_RIO500
 	tristate "USB Diamond Rio500 support"
 	depends on USB
 	help
 	  Say Y here if you want to connect a USB Rio500 mp3 player to your
 	  computer's USB port. Please read <file:Documentation/usb/rio.txt>
 	  for more information.

 	  To compile this driver as a module, choose M here: the
 	  module will be called rio500.

 config USB_LEGOTOWER
 	tristate "USB Lego Infrared Tower support"
 	depends on USB
 	help
 	  Say Y here if you want to connect a USB Lego Infrared Tower to your
 	  computer's USB port.

 	  This code is also available as a module ( = code which can be
 	  inserted in and removed from the running kernel whenever you want).
 	  The module will be called legousbtower. If you want to compile it as
 	  a module, say M here and read
 	  <file:Documentation/kbuild/modules.txt>.

 config USB_LCD
 	tristate "USB LCD driver support"
 	depends on USB
 	help
 	  Say Y here if you want to connect an USBLCD to your computer's
 	  USB port. The USBLCD is a small USB interface board for
 	  alphanumeric LCD modules. See <http://www.usblcd.de/> for more
 	  information.

 	  To compile this driver as a module, choose M here: the
 	  module will be called usblcd.

 config USB_BERRY_CHARGE
 	tristate "USB BlackBerry recharge support"
 	depends on USB
 	help
 	  Say Y here if you want to connect a BlackBerry device to your
 	  computer's USB port and have it automatically switch to "recharge"
 	  mode.

 	  To compile this driver as a module, choose M here: the
 	  module will be called berry_charge.

 config USB_LED
 	tristate "USB LED driver support"
 	depends on USB
 	help
 	  Say Y here if you want to connect an USBLED device to your
 	  computer's USB port.

 	  To compile this driver as a module, choose M here: the
 	  module will be called usbled.

 config USB_CYPRESS_CY7C63
 	tristate "Cypress CY7C63xxx USB driver support"
 	depends on USB
 	help
 	  Say Y here if you want to connect a Cypress CY7C63xxx
 	  micro controller to your computer's USB port. Currently this
 	  driver supports the pre-programmed devices (incl. firmware)
 	  by AK Modul-Bus Computer GmbH.

 	  Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html

 	  To compile this driver as a module, choose M here: the
 	  module will be called cypress_cy7c63.

 config USB_CYTHERM
 	tristate "Cypress USB thermometer driver support"
 	depends on USB
 	help
 	  Say Y here if you want to connect a Cypress USB thermometer
 	  device to your computer's USB port. This device is also known
 	  as the Cypress USB Starter kit or demo board. The Elektor
 	  magazine published a modified version of this device in issue
 	  #291.

 	  To compile this driver as a module, choose M here: the
 	  module will be called cytherm.

 config USB_PHIDGET
 	tristate "USB Phidgets drivers"
 	depends on USB
 	help
 	  Say Y here to enable the various drivers for devices from
 	  Phidgets inc.

 config USB_PHIDGETKIT
 	tristate "USB PhidgetInterfaceKit support"
 	depends on USB_PHIDGET
 	help
 	  Say Y here if you want to connect a PhidgetInterfaceKit USB device
 	  from Phidgets Inc.

 	  To compile this driver as a module, choose M here: the
 	  module will be called phidgetkit.

 config USB_PHIDGETMOTORCONTROL
 	tristate "USB PhidgetMotorControl support"
 	depends on USB_PHIDGET
 	help
 	  Say Y here if you want to connect a PhidgetMotorControl USB device
 	  from Phidgets Inc.

 	  To compile this driver as a module, choose M here: the
 	  module will be called phidgetmotorcontrol.

 config USB_PHIDGETSERVO
 	tristate "USB PhidgetServo support"
 	depends on USB_PHIDGET
 	help
 	  Say Y here if you want to connect an 1 or 4 Motor PhidgetServo
 	  servo controller version 2.0 or 3.0.

 	  Phidgets Inc. has a web page at <http://www.phidgets.com/>.

 	  To compile this driver as a module, choose M here: the
 	  module will be called phidgetservo.

 config USB_IDMOUSE
 	tristate "Siemens ID USB Mouse Fingerprint sensor support"
 	depends on USB
 	help
 	  Say Y here if you want to use the fingerprint sensor on
 	  the Siemens ID Mouse. There is also a Siemens ID Mouse
 	  _Professional_, which has not been tested with this driver,
 	  but uses the same sensor and may therefore work.

 	  This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
 	  which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".

 	  See also <http://www.fs.tum.de/~echtler/idmouse/>.

 config USB_FTDI_ELAN
 	tristate "Elan PCMCIA CardBus Adapter USB Client"
 	depends on USB
 	default M
 	help
 	  ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
 	  Currently only the U132 adapter is available.

 	  The U132 is specifically designed for CardBus PC cards that contain
 	  an OHCI host controller. Typical PC cards are the Orange Mobile 3G
 	  Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
 	  with PC cards that do not contain an OHCI controller. To use a U132
 	  adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
 	  module which is a USB host controller driver that talks to the OHCI
 	  controller within CardBus card that are inserted in the U132 adapter.

 	  This driver has been tested with a CardBus OHCI USB adapter, and
 	  worked with a USB PEN Drive inserted into the first USB port of
 	  the PCCARD. A rather pointless thing to do, but useful for testing.

 	  See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"

 	  It is safe to say M here.

 config USB_APPLEDISPLAY
 	tristate "Apple Cinema Display support"
 	depends on USB
 	select BACKLIGHT_LCD_SUPPORT
 	select BACKLIGHT_CLASS_DEVICE
 	help
 	  Say Y here if you want to control the backlight of Apple Cinema
 	  Displays over USB. This driver provides a sysfs interface.

 source "drivers/usb/misc/sisusbvga/Kconfig"

 config USB_LD
 	tristate "USB LD driver"
 	depends on USB
 	help
 	  This driver is for generic USB devices that use interrupt transfers,
 	  like LD Didactic's USB devices.

 	  To compile this driver as a module, choose M here: the
 	  module will be called ldusb.

 config USB_TRANCEVIBRATOR
 	tristate "PlayStation 2 Trance Vibrator driver support"
 	depends on USB
 	help
 	  Say Y here if you want to connect a PlayStation 2 Trance Vibrator
 	  device to your computer's USB port.

 	  To compile this driver as a module, choose M here: the
 	  module will be called trancevibrator.

 config USB_IOWARRIOR
 	tristate "IO Warrior driver support"
 	depends on USB
 	help
 	  Say Y here if you want to support the IO Warrior devices from Code
 	  Mercenaries.  This includes support for the following devices:
 	  	IO Warrior 40
 		IO Warrior 24
 		IO Warrior 56
 		IO Warrior 24 Power Vampire

 	  To compile this driver as a module, choose M here: the
 	  module will be called iowarrior.

 config USB_TEST
 	tristate "USB testing driver"
 	depends on USB && USB_DEVICEFS
 	help
 	  This driver is for testing host controller software.  It is used
 	  with specialized device firmware for regression and stress testing,
 	  to help prevent problems from cropping up with "real" drivers.

 	  See <http://www.linux-usb.org/usbtest/> for more information,
 	  including sample test device firmware and "how to use it".
	#
	# USB Miscellaneous driver configuration
	#
	comment "USB Miscellaneous drivers"
	depends on USB

	config USB_EMI62
	tristate "EMI 6\|2m USB Audio interface support"
	depends on USB
	---help---
	This driver loads firmware to Emagic EMI 6\|2m low latency USB
	Audio and Midi interface.

	After firmware load the device is handled with standard linux
	USB Audio driver.

	This code is also available as a module ( = code which can be
	inserted in and removed from the running kernel whenever you want).
	The module will be called audio. If you want to compile it as a
	module, say M here and read <file:Documentation/kbuild/modules.txt>.

	config USB_EMI26
	tristate "EMI 2\|6 USB Audio interface support"
	depends on USB
	---help---
	This driver loads firmware to Emagic EMI 2\|6 low latency USB
	Audio interface.

	After firmware load the device is handled with standard linux
	USB Audio driver.

	To compile this driver as a module, choose M here: the
	module will be called emi26.

	config USB_ADUTUX
	tristate "ADU devices from Ontrak Control Systems"
	depends on USB
	help
	Say Y if you want to use an ADU device from Ontrak Control
	Systems.

	To compile this driver as a module, choose M here. The module
	will be called adutux.

	config USB_AUERSWALD
	tristate "USB Auerswald ISDN support"
	depends on USB
	help
	Say Y here if you want to connect an Auerswald USB ISDN Device
	to your computer's USB port.

	To compile this driver as a module, choose M here: the
	module will be called auerswald.

	config USB_RIO500
	tristate "USB Diamond Rio500 support"
	depends on USB
	help
	Say Y here if you want to connect a USB Rio500 mp3 player to your
	computer's USB port. Please read <file:Documentation/usb/rio.txt>
	for more information.

	To compile this driver as a module, choose M here: the
	module will be called rio500.

	config USB_LEGOTOWER
	tristate "USB Lego Infrared Tower support"
	depends on USB
	help
	Say Y here if you want to connect a USB Lego Infrared Tower to your
	computer's USB port.

	This code is also available as a module ( = code which can be
	inserted in and removed from the running kernel whenever you want).
	The module will be called legousbtower. If you want to compile it as
	a module, say M here and read
	<file:Documentation/kbuild/modules.txt>.

	config USB_LCD
	tristate "USB LCD driver support"
	depends on USB
	help
	Say Y here if you want to connect an USBLCD to your computer's
	USB port. The USBLCD is a small USB interface board for
	alphanumeric LCD modules. See <http://www.usblcd.de/> for more
	information.

	To compile this driver as a module, choose M here: the
	module will be called usblcd.

	config USB_BERRY_CHARGE
	tristate "USB BlackBerry recharge support"
	depends on USB
	help
	Say Y here if you want to connect a BlackBerry device to your
	computer's USB port and have it automatically switch to "recharge"
	mode.

	To compile this driver as a module, choose M here: the
	module will be called berry_charge.

	config USB_LED
	tristate "USB LED driver support"
	depends on USB
	help
	Say Y here if you want to connect an USBLED device to your
	computer's USB port.

	To compile this driver as a module, choose M here: the
	module will be called usbled.

	config USB_CYPRESS_CY7C63
	tristate "Cypress CY7C63xxx USB driver support"
	depends on USB
	help
	Say Y here if you want to connect a Cypress CY7C63xxx
	micro controller to your computer's USB port. Currently this
	driver supports the pre-programmed devices (incl. firmware)
	by AK Modul-Bus Computer GmbH.

	Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html

	To compile this driver as a module, choose M here: the
	module will be called cypress_cy7c63.

	config USB_CYTHERM
	tristate "Cypress USB thermometer driver support"
	depends on USB
	help
	Say Y here if you want to connect a Cypress USB thermometer
	device to your computer's USB port. This device is also known
	as the Cypress USB Starter kit or demo board. The Elektor
	magazine published a modified version of this device in issue
	#291.

	To compile this driver as a module, choose M here: the
	module will be called cytherm.

	config USB_PHIDGET
	tristate "USB Phidgets drivers"
	depends on USB
	help
	Say Y here to enable the various drivers for devices from
	Phidgets inc.

	config USB_PHIDGETKIT
	tristate "USB PhidgetInterfaceKit support"
	depends on USB_PHIDGET
	help
	Say Y here if you want to connect a PhidgetInterfaceKit USB device
	from Phidgets Inc.

	To compile this driver as a module, choose M here: the
	module will be called phidgetkit.

	config USB_PHIDGETMOTORCONTROL
	tristate "USB PhidgetMotorControl support"
	depends on USB_PHIDGET
	help
	Say Y here if you want to connect a PhidgetMotorControl USB device
	from Phidgets Inc.

	To compile this driver as a module, choose M here: the
	module will be called phidgetmotorcontrol.

	config USB_PHIDGETSERVO
	tristate "USB PhidgetServo support"
	depends on USB_PHIDGET
	help
	Say Y here if you want to connect an 1 or 4 Motor PhidgetServo
	servo controller version 2.0 or 3.0.

	Phidgets Inc. has a web page at <http://www.phidgets.com/>.

	To compile this driver as a module, choose M here: the
	module will be called phidgetservo.

	config USB_IDMOUSE
	tristate "Siemens ID USB Mouse Fingerprint sensor support"
	depends on USB
	help
	Say Y here if you want to use the fingerprint sensor on
	the Siemens ID Mouse. There is also a Siemens ID Mouse
	_Professional_, which has not been tested with this driver,
	but uses the same sensor and may therefore work.

	This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
	which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".

	See also <http://www.fs.tum.de/~echtler/idmouse/>.

	config USB_FTDI_ELAN
	tristate "Elan PCMCIA CardBus Adapter USB Client"
	depends on USB
	default M
	help
	ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
	Currently only the U132 adapter is available.

	The U132 is specifically designed for CardBus PC cards that contain
	an OHCI host controller. Typical PC cards are the Orange Mobile 3G
	Option GlobeTrotter Fusion card. The U132 adapter will NOT work
	with PC cards that do not contain an OHCI controller. To use a U132
	adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
	module which is a USB host controller driver that talks to the OHCI
	controller within CardBus card that are inserted in the U132 adapter.

	This driver has been tested with a CardBus OHCI USB adapter, and
	worked with a USB PEN Drive inserted into the first USB port of
	the PCCARD. A rather pointless thing to do, but useful for testing.

	See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"

	It is safe to say M here.

	config USB_APPLEDISPLAY
	tristate "Apple Cinema Display support"
	depends on USB
	select BACKLIGHT_LCD_SUPPORT
	select BACKLIGHT_CLASS_DEVICE
	help
	Say Y here if you want to control the backlight of Apple Cinema
	Displays over USB. This driver provides a sysfs interface.

	source "drivers/usb/misc/sisusbvga/Kconfig"

	config USB_LD
	tristate "USB LD driver"
	depends on USB
	help
	This driver is for generic USB devices that use interrupt transfers,
	like LD Didactic's USB devices.

	To compile this driver as a module, choose M here: the
	module will be called ldusb.

	config USB_TRANCEVIBRATOR
	tristate "PlayStation 2 Trance Vibrator driver support"
	depends on USB
	help
	Say Y here if you want to connect a PlayStation 2 Trance Vibrator
	device to your computer's USB port.

	To compile this driver as a module, choose M here: the
	module will be called trancevibrator.

	config USB_IOWARRIOR
	tristate "IO Warrior driver support"
	depends on USB
	help
	Say Y here if you want to support the IO Warrior devices from Code
	Mercenaries. This includes support for the following devices:
	IO Warrior 40
	IO Warrior 24
	IO Warrior 56
	IO Warrior 24 Power Vampire

	To compile this driver as a module, choose M here: the
	module will be called iowarrior.

	config USB_TEST
	tristate "USB testing driver"
	depends on USB && USB_DEVICEFS
	help
	This driver is for testing host controller software. It is used
	with specialized device firmware for regression and stress testing,
	to help prevent problems from cropping up with "real" drivers.

	See <http://www.linux-usb.org/usbtest/> for more information,
	including sample test device firmware and "how to use it".