blob: c2197236b63285190d99bcd0fa80225b84e67eac [file] [log] [blame]
/*
* linux/arch/arm/mach-ep93xx/micro9.c
*
* Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
* Manfred Gruber <manfred.gruber@contec.at>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/io.h>
#include <linux/mtd/physmap.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
static struct ep93xx_eth_data micro9_eth_data = {
.phy_id = 0x1f,
};
static void __init micro9_init(void)
{
ep93xx_register_eth(&micro9_eth_data, 1);
}
/*
* Micro9-H
*/
#ifdef CONFIG_MACH_MICRO9H
static struct physmap_flash_data micro9h_flash_data = {
.width = 4,
};
static struct resource micro9h_flash_resource = {
.start = 0x10000000,
.end = 0x13ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device micro9h_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &micro9h_flash_data,
},
.num_resources = 1,
.resource = &micro9h_flash_resource,
};
static void __init micro9h_init(void)
{
platform_device_register(&micro9h_flash);
}
static void __init micro9h_init_machine(void)
{
ep93xx_init_devices();
micro9_init();
micro9h_init();
}
MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = micro9h_init_machine,
MACHINE_END
#endif
/*
* Micro9-M
*/
#ifdef CONFIG_MACH_MICRO9M
static void __init micro9m_init_machine(void)
{
ep93xx_init_devices();
micro9_init();
}
MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = micro9m_init_machine,
MACHINE_END
#endif
/*
* Micro9-L
*/
#ifdef CONFIG_MACH_MICRO9L
static void __init micro9l_init_machine(void)
{
ep93xx_init_devices();
micro9_init();
}
MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
.init_machine = micro9l_init_machine,
MACHINE_END
#endif