mac80211: QoS related cleanups
This
* makes the queue number passed to drivers a u16
(as it will be with skb_get_queue_mapping)
* removes the useless queue number defines
* splits hw->queues into hw->queues/ampdu_queues
* removes the debugfs files for per-queue counters
* removes some dead QoS code
* removes the beacon queue configuration for IBSS
so that the drivers now never get a queue number
bigger than (hw->queues + hw->ampdu_queues - 1)
for tx and only in the range 0..hw->queues-1 for
conf_tx.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index ef701d6..75a3460 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -98,6 +98,18 @@
};
/**
+ * enum ieee80211_max_queues - maximum number of queues
+ *
+ * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
+ * @IEEE80211_MAX_AMPDU_QUEUES: Maximum number of queues usable
+ * for A-MPDU operation.
+ */
+enum ieee80211_max_queues {
+ IEEE80211_MAX_QUEUES = 16,
+ IEEE80211_MAX_AMPDU_QUEUES = 16,
+};
+
+/**
* struct ieee80211_tx_queue_params - transmit queue configuration
*
* The information provided in this structure is required for QoS
@@ -129,42 +141,6 @@
unsigned int count;
};
-/**
- * enum ieee80211_tx_queue - transmit queue number
- *
- * These constants are used with some callbacks that take a
- * queue number to set parameters for a queue.
- *
- * @IEEE80211_TX_QUEUE_DATA0: data queue 0
- * @IEEE80211_TX_QUEUE_DATA1: data queue 1
- * @IEEE80211_TX_QUEUE_DATA2: data queue 2
- * @IEEE80211_TX_QUEUE_DATA3: data queue 3
- * @IEEE80211_TX_QUEUE_DATA4: data queue 4
- * @IEEE80211_TX_QUEUE_SVP: ??
- * @NUM_TX_DATA_QUEUES: number of data queues
- * @IEEE80211_TX_QUEUE_AFTER_BEACON: transmit queue for frames to be
- * sent after a beacon
- * @IEEE80211_TX_QUEUE_BEACON: transmit queue for beacon frames
- * @NUM_TX_DATA_QUEUES_AMPDU: adding more queues for A-MPDU
- */
-enum ieee80211_tx_queue {
- IEEE80211_TX_QUEUE_DATA0,
- IEEE80211_TX_QUEUE_DATA1,
- IEEE80211_TX_QUEUE_DATA2,
- IEEE80211_TX_QUEUE_DATA3,
- IEEE80211_TX_QUEUE_DATA4,
- IEEE80211_TX_QUEUE_SVP,
-
- NUM_TX_DATA_QUEUES,
-
-/* due to stupidity in the sub-ioctl userspace interface, the items in
- * this struct need to have fixed values. As soon as it is removed, we can
- * fix these entries. */
- IEEE80211_TX_QUEUE_AFTER_BEACON = 6,
- IEEE80211_TX_QUEUE_BEACON = 7,
- NUM_TX_DATA_QUEUES_AMPDU = 16
-};
-
struct ieee80211_low_level_stats {
unsigned int dot11ACKFailureCount;
unsigned int dot11RTSFailureCount;
@@ -315,7 +291,7 @@
* position represents antenna number used */
u8 icv_len; /* length of the ICV/MIC field in octets */
u8 iv_len; /* length of the IV field in octets */
- u8 queue; /* hardware queue to use for this frame;
+ u16 queue; /* hardware queue to use for this frame;
* 0 = highest, hw->queues-1 = lowest */
u16 aid; /* Station AID */
int type; /* internal */
@@ -772,7 +748,14 @@
* @max_noise: like @max_rssi, but for the noise value.
*
* @queues: number of available hardware transmit queues for
- * data packets. WMM/QoS requires at least four.
+ * data packets. WMM/QoS requires at least four, these
+ * queues need to have configurable access parameters.
+ *
+ * @ampdu_queues: number of available hardware transmit queues
+ * for A-MPDU packets, these have no access parameters
+ * because they're used only for A-MPDU frames. Note that
+ * mac80211 will not currently use any of the regular queues
+ * for aggregation.
*
* @rate_control_algorithm: rate control algorithm for this hardware.
* If unset (NULL), the default algorithm will be used. Must be
@@ -791,7 +774,7 @@
unsigned int extra_tx_headroom;
int channel_change_time;
int vif_data_size;
- u8 queues;
+ u16 queues, ampdu_queues;
s8 max_rssi;
s8 max_signal;
s8 max_noise;
@@ -1069,8 +1052,7 @@
* of assocaited station or AP.
*
* @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
- * bursting) for a hardware TX queue. The @queue parameter uses the
- * %IEEE80211_TX_QUEUE_* constants. Must be atomic.
+ * bursting) for a hardware TX queue. Must be atomic.
*
* @get_tx_stats: Get statistics of the current TX queue status. This is used
* to get number of currently queued packets (queue length), maximum queue
@@ -1150,7 +1132,7 @@
u32 short_retry, u32 long_retr);
void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum sta_notify_cmd, const u8 *addr);
- int (*conf_tx)(struct ieee80211_hw *hw, int queue,
+ int (*conf_tx)(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params);
int (*get_tx_stats)(struct ieee80211_hw *hw,
struct ieee80211_tx_queue_stats *stats);