[PATCH] libata: implement ata_dev_enabled and disabled()
This patch renames ata_dev_present() to ata_dev_enabled() and adds
ata_dev_disabled(). This is to discern the state where a device is
present but disabled from not-present state. This disctinction is
necessary when configuring transfer mode because device selection
timing must not be violated even if a device fails to configure.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 559abe4..c10c550 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -411,7 +411,7 @@
static void ata_dev_disable(struct ata_port *ap, struct ata_device *dev)
{
- if (ata_dev_present(dev)) {
+ if (ata_dev_enabled(dev)) {
printk(KERN_WARNING "ata%u: dev %u disabled\n",
ap->id, dev->devno);
dev->class++;
@@ -1222,7 +1222,7 @@
unsigned int xfer_mask;
int i, rc;
- if (!ata_dev_present(dev)) {
+ if (!ata_dev_enabled(dev)) {
DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n",
ap->id, dev->devno);
return 0;
@@ -1401,7 +1401,7 @@
dev->class = classes[i];
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
continue;
WARN_ON(dev->id != NULL);
@@ -1565,7 +1565,7 @@
struct ata_device *ata_dev_pair(struct ata_port *ap, struct ata_device *adev)
{
struct ata_device *pair = &ap->device[1 - adev->devno];
- if (!ata_dev_present(pair))
+ if (!ata_dev_enabled(pair))
return NULL;
return pair;
}
@@ -1778,7 +1778,7 @@
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
continue;
if (!dev->pio_mode) {
@@ -1802,7 +1802,7 @@
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (!ata_dev_present(dev) || !dev->dma_mode)
+ if (!ata_dev_enabled(dev) || !dev->dma_mode)
continue;
dev->xfer_mode = dev->dma_mode;
@@ -1830,7 +1830,7 @@
struct ata_device *dev = &ap->device[i];
unsigned int pio_mask, dma_mask;
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
continue;
ata_dev_xfermask(ap, dev);
@@ -1858,7 +1858,7 @@
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
continue;
rc = ata_dev_set_mode(ap, dev);
@@ -2550,7 +2550,7 @@
u16 *id;
int rc;
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
return -ENODEV;
class = dev->class;
@@ -2679,7 +2679,7 @@
/* FIXME: Use port-wide xfermask for now */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *d = &ap->device[i];
- if (!ata_dev_present(d))
+ if (!ata_dev_enabled(d))
continue;
xfer_mask &= ata_pack_xfermask(d->pio_mask, d->mwdma_mask,
d->udma_mask);
@@ -4299,7 +4299,7 @@
ap->flags &= ~ATA_FLAG_SUSPENDED;
ata_set_mode(ap);
}
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
return 0;
if (dev->class == ATA_DEV_ATA)
ata_start_drive(ap, dev);
@@ -4317,7 +4317,7 @@
*/
int ata_device_suspend(struct ata_port *ap, struct ata_device *dev, pm_message_t state)
{
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
return 0;
if (dev->class == ATA_DEV_ATA)
ata_flush_cache(ap, dev);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 53f5b0d..c1a4b29 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -2349,7 +2349,7 @@
(scsidev->lun != 0)))
return NULL;
- if (unlikely(!ata_dev_present(dev)))
+ if (unlikely(!ata_dev_enabled(dev)))
return NULL;
if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) {
@@ -2743,7 +2743,7 @@
for (i = 0; i < ATA_MAX_DEVICES; i++) {
dev = &ap->device[i];
- if (ata_dev_present(dev))
+ if (ata_dev_enabled(dev))
scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0);
}
}
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index fa901fd..0f7d334 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -1991,7 +1991,7 @@
tf.nsect = readb((void __iomem *) ap->ioaddr.nsect_addr);
dev->class = ata_dev_classify(&tf);
- if (!ata_dev_present(dev)) {
+ if (!ata_dev_enabled(dev)) {
VPRINTK("Port disabled post-sig: No device present.\n");
ata_port_disable(ap);
}
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 18c296c..d6c7086 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -264,7 +264,7 @@
for (i = 0; i < 2; i++) {
dev = &ap->device[i];
- if (!ata_dev_present(dev))
+ if (!ata_dev_enabled(dev))
dev_mode[i] = 0; /* PIO0/1/2 */
else if (dev->flags & ATA_DFLAG_PIO)
dev_mode[i] = 1; /* PIO3/4 */