diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index b4a1ea7..4d4897c 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -148,3 +148,17 @@
 	brother on Alchemy SOCs.  The loss of features is not considered an
 	issue.
 Who:	Ralf Baechle <ralf@linux-mips.org>
+
+---------------------------
+
+What:	Legacy /proc/pci interface (PCI_LEGACY_PROC)
+When:	March 2006
+Why:	deprecated since 2.5.53 in favor of lspci(8)
+Who:	Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
+What:	pci_module_init(driver)
+When:	January 2007
+Why:	Is replaced by pci_register_driver(pci_driver).
+Who:	Richard Knutsson <ricknu-0@student.ltu.se> and Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/Documentation/usb/et61x251.txt b/Documentation/usb/et61x251.txt
new file mode 100644
index 0000000..b44dda4
--- /dev/null
+++ b/Documentation/usb/et61x251.txt
@@ -0,0 +1,306 @@
+
+                       ET61X[12]51 PC Camera Controllers
+                                Driver for Linux
+                       =================================
+
+                               - Documentation -
+
+
+Index
+=====
+1.  Copyright
+2.  Disclaimer
+3.  License
+4.  Overview and features
+5.  Module dependencies
+6.  Module loading
+7.  Module parameters
+8.  Optional device control through "sysfs"
+9.  Supported devices
+10. Notes for V4L2 application developers
+11. Contact information
+
+
+1. Copyright
+============
+Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>
+
+
+2. Disclaimer
+=============
+Etoms is a trademark of Etoms Electronics Corp.
+This software is not developed or sponsored by Etoms Electronics.
+
+
+3. License
+==========
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+4. Overview and features
+========================
+This driver supports the video interface of the devices mounting the ET61X151
+or ET61X251 PC Camera Controllers.
+
+It's worth to note that Etoms Electronics has never collaborated with the
+author during the development of this project; despite several requests,
+Etoms Electronics also refused to release enough detailed specifications of
+the video compression engine.
+
+The driver relies on the Video4Linux2 and USB core modules. It has been
+designed to run properly on SMP systems as well.
+
+The latest version of the ET61X[12]51 driver can be found at the following URL:
+http://www.linux-projects.org/
+
+Some of the features of the driver are:
+
+- full compliance with the Video4Linux2 API (see also "Notes for V4L2
+  application developers" paragraph);
+- available mmap or read/poll methods for video streaming through isochronous
+  data transfers;
+- automatic detection of image sensor;
+- support for any window resolutions and optional panning within the maximum
+  pixel area of image sensor;
+- image downscaling with arbitrary scaling factors from 1 and 2 in both
+  directions (see "Notes for V4L2 application developers" paragraph);
+- two different video formats for uncompressed or compressed data in low or
+  high compression quality (see also "Notes for V4L2 application developers"
+  paragraph);
+- full support for the capabilities of every possible image sensors that can
+  be connected to the ET61X[12]51 bridges, including, for istance, red, green,
+  blue and global gain adjustments and exposure control (see "Supported
+  devices" paragraph for details);
+- use of default color settings for sunlight conditions;
+- dynamic I/O interface for both ET61X[12]51 and image sensor control (see
+  "Optional device control through 'sysfs'" paragraph);
+- dynamic driver control thanks to various module parameters (see "Module
+  parameters" paragraph);
+- up to 64 cameras can be handled at the same time; they can be connected and
+  disconnected from the host many times without turning off the computer, if
+  the system supports hotplugging;
+- no known bugs.
+
+
+5. Module dependencies
+======================
+For it to work properly, the driver needs kernel support for Video4Linux and
+USB.
+
+The following options of the kernel configuration file must be enabled and
+corresponding modules must be compiled:
+
+	# Multimedia devices
+	#
+	CONFIG_VIDEO_DEV=m
+
+To enable advanced debugging functionality on the device through /sysfs:
+
+	# Multimedia devices
+	#
+	CONFIG_VIDEO_ADV_DEBUG=y
+
+	# USB support
+	#
+	CONFIG_USB=m
+
+In addition, depending on the hardware being used, the modules below are
+necessary:
+
+	# USB Host Controller Drivers
+	#
+	CONFIG_USB_EHCI_HCD=m
+	CONFIG_USB_UHCI_HCD=m
+	CONFIG_USB_OHCI_HCD=m
+
+And finally:
+
+	# USB Multimedia devices
+	#
+	CONFIG_USB_ET61X251=m
+
+
+6. Module loading
+=================
+To use the driver, it is necessary to load the "et61x251" module into memory
+after every other module required: "videodev", "usbcore" and, depending on
+the USB host controller you have, "ehci-hcd", "uhci-hcd" or "ohci-hcd".
+
+Loading can be done as shown below:
+
+	[root@localhost home]# modprobe et61x251
+
+At this point the devices should be recognized. You can invoke "dmesg" to
+analyze kernel messages and verify that the loading process has gone well:
+
+	[user@localhost home]$ dmesg
+
+
+7. Module parameters
+====================
+Module parameters are listed below:
+-------------------------------------------------------------------------------
+Name:           video_nr
+Type:           short array (min = 0, max = 64)
+Syntax:         <-1|n[,...]>
+Description:    Specify V4L2 minor mode number:
+                -1 = use next available
+                 n = use minor number n
+                You can specify up to 64 cameras this way.
+                For example:
+                video_nr=-1,2,-1 would assign minor number 2 to the second
+                registered camera and use auto for the first one and for every
+                other camera.
+Default:        -1
+-------------------------------------------------------------------------------
+Name:           force_munmap
+Type:           bool array (min = 0, max = 64)
+Syntax:         <0|1[,...]>
+Description:    Force the application to unmap previously mapped buffer memory
+                before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
+                all the applications support this feature. This parameter is
+                specific for each detected camera.
+                0 = do not force memory unmapping
+                1 = force memory unmapping (save memory)
+Default:        0
+-------------------------------------------------------------------------------
+Name:           debug
+Type:           ushort
+Syntax:         <n>
+Description:    Debugging information level, from 0 to 3:
+                0 = none (use carefully)
+                1 = critical errors
+                2 = significant informations
+                3 = more verbose messages
+                Level 3 is useful for testing only, when only one device
+                is used at the same time. It also shows some more informations
+                about the hardware being detected. This module parameter can be
+                changed at runtime thanks to the /sys filesystem interface.
+Default:        2
+-------------------------------------------------------------------------------
+
+
+8. Optional device control through "sysfs"
+==========================================
+If the kernel has been compiled with the CONFIG_VIDEO_ADV_DEBUG option enabled,
+it is possible to read and write both the ET61X[12]51 and the image sensor
+registers by using the "sysfs" filesystem interface.
+
+There are four files in the /sys/class/video4linux/videoX directory for each
+registered camera: "reg", "val", "i2c_reg" and "i2c_val". The first two files
+control the ET61X[12]51 bridge, while the other two control the sensor chip.
+"reg" and "i2c_reg" hold the values of the current register index where the
+following reading/writing operations are addressed at through "val" and
+"i2c_val". Their use is not intended for end-users, unless you know what you
+are doing. Remember that you must be logged in as root before writing to them.
+
+As an example, suppose we were to want to read the value contained in the
+register number 1 of the sensor register table - which is usually the product
+identifier - of the camera registered as "/dev/video0":
+
+	[root@localhost #] cd /sys/class/video4linux/video0
+	[root@localhost #] echo 1 > i2c_reg
+	[root@localhost #] cat i2c_val
+
+Note that if the sensor registers can not be read, "cat" will fail.
+To avoid race conditions, all the I/O accesses to the files are serialized.
+
+
+9. Supported devices
+====================
+None of the names of the companies as well as their products will be mentioned
+here. They have never collaborated with the author, so no advertising.
+
+From the point of view of a driver, what unambiguously identify a device are
+its vendor and product USB identifiers. Below is a list of known identifiers of
+devices mounting the ET61X[12]51 PC camera controllers:
+
+Vendor ID  Product ID
+---------  ----------
+0x102c     0x6151
+0x102c     0x6251
+0x102c     0x6253
+0x102c     0x6254
+0x102c     0x6255
+0x102c     0x6256
+0x102c     0x6257
+0x102c     0x6258
+0x102c     0x6259
+0x102c     0x625a
+0x102c     0x625b
+0x102c     0x625c
+0x102c     0x625d
+0x102c     0x625e
+0x102c     0x625f
+0x102c     0x6260
+0x102c     0x6261
+0x102c     0x6262
+0x102c     0x6263
+0x102c     0x6264
+0x102c     0x6265
+0x102c     0x6266
+0x102c     0x6267
+0x102c     0x6268
+0x102c     0x6269
+
+The following image sensors are supported:
+
+Model       Manufacturer
+-----       ------------
+TAS5130D1B  Taiwan Advanced Sensor Corporation
+
+All the available control settings of each image sensor are supported through
+the V4L2 interface.
+
+
+10. Notes for V4L2 application developers
+========================================
+This driver follows the V4L2 API specifications. In particular, it enforces two
+rules:
+
+- exactly one I/O method, either "mmap" or "read", is associated with each
+file descriptor. Once it is selected, the application must close and reopen the
+device to switch to the other I/O method;
+
+- although it is not mandatory, previously mapped buffer memory should always
+be unmapped before calling any "VIDIOC_S_CROP" or "VIDIOC_S_FMT" ioctl's.
+The same number of buffers as before will be allocated again to match the size
+of the new video frames, so you have to map the buffers again before any I/O
+attempts on them.
+
+Consistently with the hardware limits, this driver also supports image
+downscaling with arbitrary scaling factors from 1 and 2 in both directions.
+However, the V4L2 API specifications don't correctly define how the scaling
+factor can be chosen arbitrarily by the "negotiation" of the "source" and
+"target" rectangles. To work around this flaw, we have added the convention
+that, during the negotiation, whenever the "VIDIOC_S_CROP" ioctl is issued, the
+scaling factor is restored to 1.
+
+This driver supports two different video formats: the first one is the "8-bit
+Sequential Bayer" format and can be used to obtain uncompressed video data
+from the device through the current I/O method, while the second one provides
+"raw" compressed video data (without frame headers not related to the
+compressed data). The current compression quality may vary from 0 to 1 and can
+be selected or queried thanks to the VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP
+V4L2 ioctl's.
+
+
+11. Contact information
+=======================
+The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
+
+GPG/PGP encrypted e-mail's are accepted. The GPG key ID of the author is
+'FCE635A4'; the public 1024-bit key should be available at any keyserver;
+the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
diff --git a/Documentation/usb/sn9c102.txt b/Documentation/usb/sn9c102.txt
index 3f8a119..c6b7641 100644
--- a/Documentation/usb/sn9c102.txt
+++ b/Documentation/usb/sn9c102.txt
@@ -17,16 +17,15 @@
 7.  Module parameters
 8.  Optional device control through "sysfs"
 9.  Supported devices
-10. How to add plug-in's for new image sensors
-11. Notes for V4L2 application developers
-12. Video frame formats
-13. Contact information
-14. Credits
+10. Notes for V4L2 application developers
+11. Video frame formats
+12. Contact information
+13. Credits
 
 
 1. Copyright
 ============
-Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>
+Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>
 
 
 2. Disclaimer
@@ -54,9 +53,8 @@
 
 4. Overview and features
 ========================
-This driver attempts to support the video and audio streaming capabilities of
-the devices mounting the SONiX SN9C101, SN9C102 and SN9C103 PC Camera
-Controllers.
+This driver attempts to support the video interface of the devices mounting the
+SONiX SN9C101, SN9C102 and SN9C103 PC Camera Controllers.
 
 It's worth to note that SONiX has never collaborated with the author during the
 development of this project, despite several requests for enough detailed
@@ -78,6 +76,7 @@
 - available mmap or read/poll methods for video streaming through isochronous
   data transfers;
 - automatic detection of image sensor;
+- support for built-in microphone interface;
 - support for any window resolutions and optional panning within the maximum
   pixel area of image sensor;
 - image downscaling with arbitrary scaling factors from 1, 2 and 4 in both
@@ -96,7 +95,7 @@
   parameters" paragraph);
 - up to 64 cameras can be handled at the same time; they can be connected and
   disconnected from the host many times without turning off the computer, if
-  your system supports hotplugging;
+  the system supports hotplugging;
 - no known bugs.
 
 
@@ -112,6 +111,12 @@
 	#
 	CONFIG_VIDEO_DEV=m
 
+To enable advanced debugging functionality on the device through /sysfs:
+
+	# Multimedia devices
+	#
+	CONFIG_VIDEO_ADV_DEBUG=y
+
 	# USB support
 	#
 	CONFIG_USB=m
@@ -125,6 +130,21 @@
 	CONFIG_USB_UHCI_HCD=m
 	CONFIG_USB_OHCI_HCD=m
 
+The SN9C103 controller also provides a built-in microphone interface. It is
+supported by the USB Audio driver thanks to the ALSA API:
+
+	# Sound
+	#
+	CONFIG_SOUND=y
+
+	# Advanced Linux Sound Architecture
+	#
+	CONFIG_SND=m
+
+	# USB devices
+	#
+	CONFIG_SND_USB_AUDIO=m
+
 And finally:
 
 	# USB Multimedia devices
@@ -153,7 +173,7 @@
 Module parameters are listed below:
 -------------------------------------------------------------------------------
 Name:           video_nr
-Type:           int array (min = 0, max = 64)
+Type:           short array (min = 0, max = 64)
 Syntax:         <-1|n[,...]> 
 Description:    Specify V4L2 minor mode number:
                 -1 = use next available
@@ -165,19 +185,19 @@
                 other camera.
 Default:        -1
 -------------------------------------------------------------------------------
-Name:           force_munmap;
+Name:           force_munmap
 Type:           bool array (min = 0, max = 64)
 Syntax:         <0|1[,...]> 
 Description:    Force the application to unmap previously mapped buffer memory
                 before calling any VIDIOC_S_CROP or VIDIOC_S_FMT ioctl's. Not
                 all the applications support this feature. This parameter is
                 specific for each detected camera.
-                0 = do not force memory unmapping"
-                1 = force memory unmapping (save memory)"
+                0 = do not force memory unmapping
+                1 = force memory unmapping (save memory)
 Default:        0
 -------------------------------------------------------------------------------
 Name:           debug
-Type:           int
+Type:           ushort
 Syntax:         <n> 
 Description:    Debugging information level, from 0 to 3:
                 0 = none (use carefully)
@@ -187,14 +207,15 @@
                 Level 3 is useful for testing only, when only one device
                 is used. It also shows some more informations about the
                 hardware being detected. This parameter can be changed at
-                runtime thanks to the /sys filesystem.
+                runtime thanks to the /sys filesystem interface.
 Default:        2
 -------------------------------------------------------------------------------
 
 
 8. Optional device control through "sysfs" [1]
 ==========================================
-It is possible to read and write both the SN9C10x and the image sensor
+If the kernel has been compiled with the CONFIG_VIDEO_ADV_DEBUG option enabled,
+it is possible to read and write both the SN9C10x and the image sensor
 registers by using the "sysfs" filesystem interface.
 
 Every time a supported device is recognized, a write-only file named "green" is
@@ -236,7 +257,7 @@
 
 The sysfs interface also provides the "frame_header" entry, which exports the
 frame header of the most recent requested and captured video frame. The header
-is 12-bytes long and is appended to every video frame by the SN9C10x
+is always 18-bytes long and is appended to every video frame by the SN9C10x
 controllers. As an example, this additional information can be used by the user
 application for implementing auto-exposure features via software. 
 
@@ -250,7 +271,8 @@
 0x03    0xC4          Frame synchronisation pattern.
 0x04    0xC4          Frame synchronisation pattern.
 0x05    0x96          Frame synchronisation pattern.
-0x06    0x00 or 0x01  Unknown meaning. The exact value depends on the chip.
+0x06    0xXX          Unknown meaning. The exact value depends on the chip;
+                      possible values are 0x00, 0x01 and 0x20.
 0x07    0xXX          Variable value, whose bits are ff00uzzc, where ff is a
                       frame counter, u is unknown, zz is a size indicator
                       (00 = VGA, 01 = SIF, 10 = QSIF) and c stands for
@@ -267,12 +289,23 @@
                       times the area outside of the specified AE area. For
                       images that are not pure white, the value scales down
                       according to relative whiteness.
+                      according to relative whiteness.
+
+The following bytes are used by the SN9C103 bridge only:
+
+0x0C    0xXX          Unknown meaning
+0x0D    0xXX          Unknown meaning
+0x0E    0xXX          Unknown meaning
+0x0F    0xXX          Unknown meaning
+0x10    0xXX          Unknown meaning
+0x11    0xXX          Unknown meaning
 
 The AE area (sx, sy, ex, ey) in the active window can be set by programming the
 registers 0x1c, 0x1d, 0x1e and 0x1f of the SN9C10x controllers, where one unit
 corresponds to 32 pixels.
 
-[1] The frame header has been documented by Bertrik Sikken.
+[1] Part of the meaning of the frame header has been documented by Bertrik
+    Sikken.
 
 
 9. Supported devices
@@ -298,6 +331,7 @@
 0x0c45     0x602b
 0x0c45     0x602c
 0x0c45     0x602d
+0x0c45     0x602e
 0x0c45     0x6030
 0x0c45     0x6080
 0x0c45     0x6082
@@ -348,18 +382,7 @@
 driver.
 
 
-10. How to add plug-in's for new image sensors
-==============================================
-It should be easy to write plug-in's for new sensors by using the small API
-that has been created for this purpose, which is present in "sn9c102_sensor.h"
-(documentation is included there). As an example, have a look at the code in
-"sn9c102_pas106b.c", which uses the mentioned interface.
-
-At the moment, possible unsupported image sensors are: CIS-VF10 (VGA),
-OV7620 (VGA), OV7630 (VGA).
-
-
-11. Notes for V4L2 application developers
+10. Notes for V4L2 application developers
 =========================================
 This driver follows the V4L2 API specifications. In particular, it enforces two
 rules:
@@ -394,7 +417,7 @@
 supplied by this driver).
 
 
-12. Video frame formats [1]
+11. Video frame formats [1]
 =======================
 The SN9C10x PC Camera Controllers can send images in two possible video
 formats over the USB: either native "Sequential RGB Bayer" or Huffman
@@ -455,7 +478,7 @@
     documented by Bertrik Sikken.
 
 
-13. Contact information
+12. Contact information
 =======================
 The author may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
 
@@ -464,7 +487,7 @@
 the fingerprint is: '88E8 F32F 7244 68BA 3958  5D40 99DA 5D2A FCE6 35A4'.
 
 
-14. Credits
+13. Credits
 ===========
 Many thanks to following persons for their contribute (listed in alphabetical
 order):
@@ -480,5 +503,5 @@
 - Bertrik Sikken, who reverse-engineered and documented the Huffman compression
   algorithm used in the SN9C10x controllers and implemented the first decoder;
 - Mizuno Takafumi for the donation of a webcam;
-- An "anonymous" donator (who didn't want his name to be revealed) for the
+- an "anonymous" donator (who didn't want his name to be revealed) for the
   donation of a webcam.
diff --git a/Documentation/usb/w9968cf.txt b/Documentation/usb/w9968cf.txt
index 18a4773..9d46cd0 100644
--- a/Documentation/usb/w9968cf.txt
+++ b/Documentation/usb/w9968cf.txt
@@ -57,16 +57,12 @@
 The driver is divided into two modules: the basic one, "w9968cf", is needed for
 the supported devices to work; the second one, "w9968cf-vpp", is an optional
 module, which provides some useful video post-processing functions like video
-decoding, up-scaling and colour conversions. Once the driver is installed,
-every time an application tries to open a recognized device, "w9968cf" checks
-the presence of the "w9968cf-vpp" module and loads it automatically by default.
+decoding, up-scaling and colour conversions.
 
-Please keep in mind that official kernels do not include the second module for
-performance purposes. However it is always recommended to download and install
-the latest and complete release of the driver, replacing the existing one, if
-present: it will be still even possible not to load the "w9968cf-vpp" module at
-all, if you ever want to. Another important missing feature of the version in
-the official Linux 2.4 kernels is the writeable /proc filesystem interface.
+Note that the official kernels do neither include nor support the second
+module for performance purposes. Therefore, it is always recommended to
+download and install the latest and complete release of the driver,
+replacing the existing one, if present.
 
 The latest and full-featured version of the W996[87]CF driver can be found at:
 http://www.linux-projects.org. Please refer to the documentation included in
@@ -201,22 +197,6 @@
                  enabled for the 'ovcamchip' module to be loaded and for
                  this parameter to be present.
 -------------------------------------------------------------------------------
-Name:           vppmod_load
-Type:           bool
-Syntax:         <0|1>
-Description:    Automatic 'w9968cf-vpp' module loading: 0 disabled, 1 enabled.
-                If enabled, every time an application attempts to open a
-                camera, 'insmod' searches for the video post-processing module
-                in the system and loads it automatically (if present).
-                The optional 'w9968cf-vpp' module adds extra image manipulation
-                capabilities to the 'w9968cf' module,like software up-scaling,
-                colour conversions and video decompression for very high frame
-                rates.
-Default:        1
-Note:           The kernel must be compiled with the CONFIG_KMOD option
-                enabled for the 'w9968cf-vpp' module to be loaded and for
-                this parameter to be present.
--------------------------------------------------------------------------------
 Name:           simcams 
 Type:           int 
 Syntax:         <n> 
diff --git a/MAINTAINERS b/MAINTAINERS
index a37a2b3..42955fe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2673,6 +2673,14 @@
 L:	linux-usb-devel@lists.sourceforge.net
 S:	Maintained
 
+USB ET61X[12]51 DRIVER
+P:	Luca Risolia
+M:	luca.risolia@studio.unibo.it
+L:	linux-usb-devel@lists.sourceforge.net
+L:	video4linux-list@redhat.com
+W:	http://www.linux-projects.org
+S:	Maintained
+
 USB HID/HIDBP DRIVERS
 P:	Vojtech Pavlik
 M:	vojtech@suse.cz
@@ -2836,6 +2844,7 @@
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
 L:	linux-usb-devel@lists.sourceforge.net
+L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
 
@@ -2865,6 +2874,7 @@
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
 L:	linux-usb-devel@lists.sourceforge.net
+L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
 
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index e715aa9..3ca59ca 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -539,6 +539,11 @@
 		case PCI_DEVICE_ID_INTEL_ICH7_30:
 		case PCI_DEVICE_ID_INTEL_ICH7_31:
 		case PCI_DEVICE_ID_INTEL_ESB2_0:
+		case PCI_DEVICE_ID_INTEL_ICH8_0:
+		case PCI_DEVICE_ID_INTEL_ICH8_1:
+		case PCI_DEVICE_ID_INTEL_ICH8_2:
+		case PCI_DEVICE_ID_INTEL_ICH8_3:
+		case PCI_DEVICE_ID_INTEL_ICH8_4:
 			r->name = "PIIX/ICH";
 			r->get = pirq_piix_get;
 			r->set = pirq_piix_set;
diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c
index 4bb4d4b..0ee8a98 100644
--- a/arch/i386/pci/mmconfig.c
+++ b/arch/i386/pci/mmconfig.c
@@ -36,8 +36,7 @@
 	while (1) {
 		++cfg_num;
 		if (cfg_num >= pci_mmcfg_config_num) {
-			/* Not found - fallback to type 1 */
-			return 0;
+			break;
 		}
 		cfg = &pci_mmcfg_config[cfg_num];
 		if (cfg->pci_segment_group_number != seg)
@@ -46,6 +45,18 @@
 		    (cfg->end_bus_number >= bus))
 			return cfg->base_address;
 	}
+
+	/* Handle more broken MCFG tables on Asus etc.
+	   They only contain a single entry for bus 0-0. Assume
+ 	   this applies to all busses. */
+	cfg = &pci_mmcfg_config[0];
+	if (pci_mmcfg_config_num == 1 &&
+		cfg->pci_segment_group_number == 0 &&
+		(cfg->start_bus_number | cfg->end_bus_number) == 0)
+		return cfg->base_address;
+
+	/* Fall back to type 0 */
+	return 0;
 }
 
 static inline void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
index f16c0d5..00d4ddb 100644
--- a/arch/x86_64/pci/mmconfig.c
+++ b/arch/x86_64/pci/mmconfig.c
@@ -29,11 +29,8 @@
 
 	while (1) {
 		++cfg_num;
-		if (cfg_num >= pci_mmcfg_config_num) {
-			/* Not found - fall back to type 1. This happens
-			   e.g. on the internal devices of a K8 northbridge. */
-			return NULL;
-		}
+		if (cfg_num >= pci_mmcfg_config_num)
+			break;
 		cfg = pci_mmcfg_virt[cfg_num].cfg;
 		if (cfg->pci_segment_group_number != seg)
 			continue;
@@ -41,6 +38,18 @@
 		    (cfg->end_bus_number >= bus))
 			return pci_mmcfg_virt[cfg_num].virt;
 	}
+
+	/* Handle more broken MCFG tables on Asus etc.
+	   They only contain a single entry for bus 0-0. Assume
+ 	   this applies to all busses. */
+	cfg = &pci_mmcfg_config[0];
+	if (pci_mmcfg_config_num == 1 &&
+		cfg->pci_segment_group_number == 0 &&
+		(cfg->start_bus_number | cfg->end_bus_number) == 0)
+		return cfg->base_address;
+
+	/* Fall back to type 0 */
+	return 0;
 }
 
 static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index a05fe58..f04d864 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -14,7 +14,6 @@
  *  -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
  *  -- verify the 13 conditions and do bulk resets
  *  -- kill last_pipe and simply do two-state clearing on both pipes
- *  -- verify protocol (bulk) from USB descriptors (maybe...)
  *  -- highmem
  *  -- move top_sense and work_bcs into separate allocations (if they survive)
  *     for cache purists and esoteric architectures.
@@ -355,7 +354,7 @@
  * The USB device instance.
  */
 struct ub_dev {
-	spinlock_t lock;
+	spinlock_t *lock;
 	atomic_t poison;		/* The USB device is disconnected */
 	int openc;			/* protected by ub_lock! */
 					/* kref is too implicit for our taste */
@@ -420,11 +419,13 @@
 static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
     int stalled_pipe);
 static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
-static void ub_reset_enter(struct ub_dev *sc);
+static void ub_reset_enter(struct ub_dev *sc, int try);
 static void ub_reset_task(void *arg);
 static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
 static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
     struct ub_capacity *ret);
+static int ub_sync_reset(struct ub_dev *sc);
+static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe);
 static int ub_probe_lun(struct ub_dev *sc, int lnum);
 
 /*
@@ -452,6 +453,10 @@
 #define UB_MAX_HOSTS  26
 static char ub_hostv[UB_MAX_HOSTS];
 
+#define UB_QLOCK_NUM 5
+static spinlock_t ub_qlockv[UB_QLOCK_NUM];
+static int ub_qlock_next = 0;
+
 static DEFINE_SPINLOCK(ub_lock);	/* Locks globals and ->openc */
 
 /*
@@ -531,7 +536,7 @@
 		return 0;
 
 	cnt = 0;
-	spin_lock_irqsave(&sc->lock, flags);
+	spin_lock_irqsave(sc->lock, flags);
 
 	cnt += sprintf(page + cnt,
 	    "poison %d reset %d\n",
@@ -579,7 +584,7 @@
 		if (++nc == SCMD_TRACE_SZ) nc = 0;
 	}
 
-	spin_unlock_irqrestore(&sc->lock, flags);
+	spin_unlock_irqrestore(sc->lock, flags);
 	return cnt;
 }
 
@@ -627,6 +632,24 @@
 }
 
 /*
+ * This is necessitated by the fact that blk_cleanup_queue does not
+ * necesserily destroy the queue. Instead, it may merely decrease q->refcnt.
+ * Since our blk_init_queue() passes a spinlock common with ub_dev,
+ * we have life time issues when ub_cleanup frees ub_dev.
+ */
+static spinlock_t *ub_next_lock(void)
+{
+	unsigned long flags;
+	spinlock_t *ret;
+
+	spin_lock_irqsave(&ub_lock, flags);
+	ret = &ub_qlockv[ub_qlock_next];
+	ub_qlock_next = (ub_qlock_next + 1) % UB_QLOCK_NUM;
+	spin_unlock_irqrestore(&ub_lock, flags);
+	return ret;
+}
+
+/*
  * Downcount for deallocation. This rides on two assumptions:
  *  - once something is poisoned, its refcount cannot grow
  *  - opens cannot happen at this time (del_gendisk was done)
@@ -961,7 +984,7 @@
 	if (atomic_read(&sc->poison))
 		return -ENXIO;
 
-	ub_reset_enter(sc);
+	ub_reset_enter(sc, urq->current_try);
 
 	if (urq->current_try >= 3)
 		return -EIO;
@@ -997,8 +1020,6 @@
  * No exceptions.
  *
  * Host is assumed locked.
- *
- * XXX We only support Bulk for the moment.
  */
 static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 {
@@ -1083,9 +1104,10 @@
 	struct ub_dev *sc = (struct ub_dev *) arg;
 	unsigned long flags;
 
-	spin_lock_irqsave(&sc->lock, flags);
-	usb_unlink_urb(&sc->work_urb);
-	spin_unlock_irqrestore(&sc->lock, flags);
+	spin_lock_irqsave(sc->lock, flags);
+	if (!ub_is_completed(&sc->work_done))
+		usb_unlink_urb(&sc->work_urb);
+	spin_unlock_irqrestore(sc->lock, flags);
 }
 
 /*
@@ -1108,10 +1130,9 @@
 	struct ub_dev *sc = (struct ub_dev *) _dev;
 	unsigned long flags;
 
-	spin_lock_irqsave(&sc->lock, flags);
-	del_timer(&sc->work_timer);
+	spin_lock_irqsave(sc->lock, flags);
 	ub_scsi_dispatch(sc);
-	spin_unlock_irqrestore(&sc->lock, flags);
+	spin_unlock_irqrestore(sc->lock, flags);
 }
 
 static void ub_scsi_dispatch(struct ub_dev *sc)
@@ -1133,6 +1154,7 @@
 		} else {
 			if (!ub_is_completed(&sc->work_done))
 				break;
+			del_timer(&sc->work_timer);
 			ub_scsi_urb_compl(sc, cmd);
 		}
 	}
@@ -1680,16 +1702,18 @@
 
 /*
  * Reset management
+ * XXX Move usb_reset_device to khubd. Hogging kevent is not a good thing.
+ * XXX Make usb_sync_reset asynchronous.
  */
 
-static void ub_reset_enter(struct ub_dev *sc)
+static void ub_reset_enter(struct ub_dev *sc, int try)
 {
 
 	if (sc->reset) {
 		/* This happens often on multi-LUN devices. */
 		return;
 	}
-	sc->reset = 1;
+	sc->reset = try + 1;
 
 #if 0 /* Not needed because the disconnect waits for us. */
 	unsigned long flags;
@@ -1727,6 +1751,11 @@
 	if (atomic_read(&sc->poison)) {
 		printk(KERN_NOTICE "%s: Not resetting disconnected device\n",
 		    sc->name); /* P3 This floods. Remove soon. XXX */
+	} else if ((sc->reset & 1) == 0) {
+		ub_sync_reset(sc);
+		msleep(700);	/* usb-storage sleeps 6s (!) */
+		ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
+		ub_probe_clear_stall(sc, sc->send_bulk_pipe);
 	} else if (sc->dev->actconfig->desc.bNumInterfaces != 1) {
 		printk(KERN_NOTICE "%s: Not resetting multi-interface device\n",
 		    sc->name); /* P3 This floods. Remove soon. XXX */
@@ -1754,7 +1783,7 @@
 	 * queues of resets or anything. We do need a spinlock though,
 	 * to interact with block layer.
 	 */
-	spin_lock_irqsave(&sc->lock, flags);
+	spin_lock_irqsave(sc->lock, flags);
 	sc->reset = 0;
 	tasklet_schedule(&sc->tasklet);
 	list_for_each(p, &sc->luns) {
@@ -1762,7 +1791,7 @@
 		blk_start_queue(lun->disk->queue);
 	}
 	wake_up(&sc->reset_wait);
-	spin_unlock_irqrestore(&sc->lock, flags);
+	spin_unlock_irqrestore(sc->lock, flags);
 }
 
 /*
@@ -1990,11 +2019,11 @@
 	cmd->done = ub_probe_done;
 	cmd->back = &compl;
 
-	spin_lock_irqsave(&sc->lock, flags);
+	spin_lock_irqsave(sc->lock, flags);
 	cmd->tag = sc->tagcnt++;
 
 	rc = ub_submit_scsi(sc, cmd);
-	spin_unlock_irqrestore(&sc->lock, flags);
+	spin_unlock_irqrestore(sc->lock, flags);
 
 	if (rc != 0) {
 		printk("ub: testing ready: submit error (%d)\n", rc); /* P3 */
@@ -2052,11 +2081,11 @@
 	cmd->done = ub_probe_done;
 	cmd->back = &compl;
 
-	spin_lock_irqsave(&sc->lock, flags);
+	spin_lock_irqsave(sc->lock, flags);
 	cmd->tag = sc->tagcnt++;
 
 	rc = ub_submit_scsi(sc, cmd);
-	spin_unlock_irqrestore(&sc->lock, flags);
+	spin_unlock_irqrestore(sc->lock, flags);
 
 	if (rc != 0) {
 		printk("ub: reading capacity: submit error (%d)\n", rc); /* P3 */
@@ -2118,6 +2147,52 @@
 }
 
 /*
+ * Reset with a Bulk reset.
+ */
+static int ub_sync_reset(struct ub_dev *sc)
+{
+	int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
+	struct usb_ctrlrequest *cr;
+	struct completion compl;
+	struct timer_list timer;
+	int rc;
+
+	init_completion(&compl);
+
+	cr = &sc->work_cr;
+	cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+	cr->bRequest = US_BULK_RESET_REQUEST;
+	cr->wValue = cpu_to_le16(0);
+	cr->wIndex = cpu_to_le16(ifnum);
+	cr->wLength = cpu_to_le16(0);
+
+	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->send_ctrl_pipe,
+	    (unsigned char*) cr, NULL, 0, ub_probe_urb_complete, &compl);
+	sc->work_urb.actual_length = 0;
+	sc->work_urb.error_count = 0;
+	sc->work_urb.status = 0;
+
+	if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
+		printk(KERN_WARNING
+		     "%s: Unable to submit a bulk reset (%d)\n", sc->name, rc);
+		return rc;
+	}
+
+	init_timer(&timer);
+	timer.function = ub_probe_timeout;
+	timer.data = (unsigned long) &compl;
+	timer.expires = jiffies + UB_CTRL_TIMEOUT;
+	add_timer(&timer);
+
+	wait_for_completion(&compl);
+
+	del_timer_sync(&timer);
+	usb_kill_urb(&sc->work_urb);
+
+	return sc->work_urb.status;
+}
+
+/*
  * Get number of LUNs by the way of Bulk GetMaxLUN command.
  */
 static int ub_sync_getmaxlun(struct ub_dev *sc)
@@ -2333,7 +2408,7 @@
 	if ((sc = kmalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
 		goto err_core;
 	memset(sc, 0, sizeof(struct ub_dev));
-	spin_lock_init(&sc->lock);
+	sc->lock = ub_next_lock();
 	INIT_LIST_HEAD(&sc->luns);
 	usb_init_urb(&sc->work_urb);
 	tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
@@ -2483,7 +2558,7 @@
 	disk->driverfs_dev = &sc->intf->dev;
 
 	rc = -ENOMEM;
-	if ((q = blk_init_queue(ub_request_fn, &sc->lock)) == NULL)
+	if ((q = blk_init_queue(ub_request_fn, sc->lock)) == NULL)
 		goto err_blkqinit;
 
 	disk->queue = q;
@@ -2554,7 +2629,7 @@
 	 * and the whole queue drains. So, we just use this code to
 	 * print warnings.
 	 */
-	spin_lock_irqsave(&sc->lock, flags);
+	spin_lock_irqsave(sc->lock, flags);
 	{
 		struct ub_scsi_cmd *cmd;
 		int cnt = 0;
@@ -2571,7 +2646,7 @@
 			    "%d was queued after shutdown\n", sc->name, cnt);
 		}
 	}
-	spin_unlock_irqrestore(&sc->lock, flags);
+	spin_unlock_irqrestore(sc->lock, flags);
 
 	/*
 	 * Unregister the upper layer.
@@ -2590,19 +2665,15 @@
 	}
 
 	/*
-	 * Taking a lock on a structure which is about to be freed
-	 * is very nonsensual. Here it is largely a way to do a debug freeze,
-	 * and a bracket which shows where the nonsensual code segment ends.
-	 *
 	 * Testing for -EINPROGRESS is always a bug, so we are bending
 	 * the rules a little.
 	 */
-	spin_lock_irqsave(&sc->lock, flags);
+	spin_lock_irqsave(sc->lock, flags);
 	if (sc->work_urb.status == -EINPROGRESS) {	/* janitors: ignore */
 		printk(KERN_WARNING "%s: "
 		    "URB is active after disconnect\n", sc->name);
 	}
-	spin_unlock_irqrestore(&sc->lock, flags);
+	spin_unlock_irqrestore(sc->lock, flags);
 
 	/*
 	 * There is virtually no chance that other CPU runs times so long
@@ -2636,6 +2707,10 @@
 static int __init ub_init(void)
 {
 	int rc;
+	int i;
+
+	for (i = 0; i < UB_QLOCK_NUM; i++)
+		spin_lock_init(&ub_qlockv[i]);
 
 	if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
 		goto err_regblkdev;
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index 2f1289e..222a1cc 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -11,8 +11,7 @@
 	---help---
 	  Say Y here if you have a motherboard with a PCI Hotplug controller.
 	  This allows you to add and remove PCI cards while the machine is
-	  powered up and running.  The file system pcihpfs must be mounted
-	  in order to interact with any PCI Hotplug controllers.
+	  powered up and running.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pci_hotplug.
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index 7e7f913..317457d 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -302,7 +302,7 @@
 	}
 
 	package = (union acpi_object *) buffer.pointer;
-	if(!(package) ||
+	if (!(package) ||
 			(package->type != ACPI_TYPE_PACKAGE) ||
 			!(package->package.elements)) {
 		err("%s:  Invalid APCI object\n", __FUNCTION__);
@@ -405,7 +405,7 @@
 	}
 	info.hardware_id.value[sizeof(info.hardware_id.value) - 1] = '\0';
 
-	if(info.current_status && (info.valid & ACPI_VALID_HID) &&
+	if (info.current_status && (info.valid & ACPI_VALID_HID) &&
 			(!strcmp(info.hardware_id.value, IBM_HARDWARE_ID1) ||
 			!strcmp(info.hardware_id.value, IBM_HARDWARE_ID2))) {
 		dbg("found hardware: %s, handle: %p\n", info.hardware_id.value,
@@ -449,13 +449,11 @@
 	}
 
 	ibm_note.device = device;
-	status = acpi_install_notify_handler(
-			ibm_acpi_handle,
-			ACPI_DEVICE_NOTIFY,
-			ibm_handle_events,
+	status = acpi_install_notify_handler(ibm_acpi_handle,
+			ACPI_DEVICE_NOTIFY, ibm_handle_events,
 			&ibm_note);
 	if (ACPI_FAILURE(status)) {
-		err("%s:  Failed to register notification handler\n",
+		err("%s: Failed to register notification handler\n",
 				__FUNCTION__);
 		retval = -EBUSY;
 		goto init_cleanup;
@@ -482,14 +480,13 @@
 	if (acpiphp_unregister_attention(&ibm_attention_info))
 		err("%s: attention info deregistration failed", __FUNCTION__);
 
-	   status = acpi_remove_notify_handler(
+	status = acpi_remove_notify_handler(
 			   ibm_acpi_handle,
 			   ACPI_DEVICE_NOTIFY,
 			   ibm_handle_events);
-	   if (ACPI_FAILURE(status))
-		   err("%s:  Notification handler removal failed\n",
-				   __FUNCTION__);
-	// remove the /sys entries
+	if (ACPI_FAILURE(status))
+		err("%s: Notification handler removal failed\n", __FUNCTION__);
+	/* remove the /sys entries */
 	if (sysfs_remove_bin_file(sysdir, &ibm_apci_table_attr))
 		err("%s: removal of sysfs file apci_table failed\n",
 				__FUNCTION__);
diff --git a/drivers/pci/hotplug/ibmphp_core.c b/drivers/pci/hotplug/ibmphp_core.c
index aabf1e7..dc59da6 100644
--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -235,12 +235,12 @@
 {
 	int rc = 0;
 	struct slot *pslot;
-	u8 cmd;
+	u8 cmd = 0x00;     /* avoid compiler warning */
 
 	debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n",
 			(ulong) hotplug_slot, value);
 	ibmphp_lock_operations();
-	cmd = 0x00;     // avoid compiler warning
+
 
 	if (hotplug_slot) {
 		switch (value) {
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index 7d93dba..3eefe2c 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -103,13 +103,13 @@
 	struct list_head *tmp, *n;
 	struct slot *slot;
 
-        list_for_each_safe(tmp, n, &rpaphp_slot_head) {
-                slot = list_entry(tmp, struct slot, rpaphp_slot_list);
-                if (slot->dn == dn)
-                        return slot;
-        }
+	list_for_each_safe(tmp, n, &rpaphp_slot_head) {
+		slot = list_entry(tmp, struct slot, rpaphp_slot_list);
+		if (slot->dn == dn)
+			return slot;
+	}
 
-        return NULL;
+	return NULL;
 }
 
 static struct pci_dev *dlpar_find_new_dev(struct pci_bus *parent,
@@ -126,9 +126,9 @@
 	return NULL;
 }
 
-static struct pci_dev *dlpar_pci_add_bus(struct device_node *dn)
+static void dlpar_pci_add_bus(struct device_node *dn)
 {
-	struct pci_dn *pdn = dn->data;
+	struct pci_dn *pdn = PCI_DN(dn);
 	struct pci_controller *phb = pdn->phb;
 	struct pci_dev *dev = NULL;
 
@@ -139,52 +139,52 @@
 	if (!dev) {
 		printk(KERN_ERR "%s: failed to create pci dev for %s\n",
 				__FUNCTION__, dn->full_name);
-		return NULL;
+		return;
 	}
 
 	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
 	    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
 		of_scan_pci_bridge(dn, dev);
 
-	rpaphp_init_new_devs(dev->subordinate);
+	pcibios_fixup_new_pci_devices(dev->subordinate,0);
 
 	/* Claim new bus resources */
 	pcibios_claim_one_bus(dev->bus);
 
 	/* ioremap() for child bus, which may or may not succeed */
-	(void) remap_bus_range(dev->bus);
+	remap_bus_range(dev->subordinate);
 
 	/* Add new devices to global lists.  Register in proc, sysfs. */
 	pci_bus_add_devices(phb->bus);
-
-	/* Confirm new bridge dev was created */
-	dev = dlpar_find_new_dev(phb->bus, dn);
-	if (dev) {
-		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-			printk(KERN_ERR "%s: unexpected header type %d\n",
-				__FUNCTION__, dev->hdr_type);
-			return NULL;
-		}
-	}
-
-	return dev;
 }
 
 static int dlpar_add_pci_slot(char *drc_name, struct device_node *dn)
 {
 	struct pci_dev *dev;
+	struct pci_controller *phb;
 
-	if (rpaphp_find_pci_bus(dn))
+	if (pcibios_find_pci_bus(dn))
 		return -EINVAL;
 
 	/* Add pci bus */
-	dev = dlpar_pci_add_bus(dn);
+	dlpar_pci_add_bus(dn);
+
+	/* Confirm new bridge dev was created */
+	phb = PCI_DN(dn)->phb;
+	dev = dlpar_find_new_dev(phb->bus, dn);
+
 	if (!dev) {
 		printk(KERN_ERR "%s: unable to add bus %s\n", __FUNCTION__,
 			drc_name);
 		return -EIO;
 	}
 
+	if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
+		printk(KERN_ERR "%s: unexpected header type %d, unable to add bus %s\n",
+			__FUNCTION__, dev->hdr_type, drc_name);
+		return -EIO;
+	}
+
 	/* Add hotplug slot */
 	if (rpaphp_add_slot(dn)) {
 		printk(KERN_ERR "%s: unable to add hotplug slot %s\n",
@@ -221,13 +221,13 @@
 	struct pci_dn *pdn;
 	int rc = 0;
 
-	if (!rpaphp_find_pci_bus(dn))
+	if (!pcibios_find_pci_bus(dn))
 		return -EINVAL;
 
 	slot = find_slot(dn);
 	if (slot) {
 		/* Remove hotplug slot */
-		if (rpaphp_remove_slot(slot)) {
+		if (rpaphp_deregister_slot(slot)) {
 			printk(KERN_ERR
 				"%s: unable to remove hotplug slot %s\n",
 				__FUNCTION__, drc_name);
@@ -366,21 +366,25 @@
 	struct pci_bus *bus;
 	struct slot *slot;
 
-	bus = rpaphp_find_pci_bus(dn);
+	bus = pcibios_find_pci_bus(dn);
 	if (!bus)
 		return -EINVAL;
 
 	slot = find_slot(dn);
 	if (slot) {
 		/* Remove hotplug slot */
-		if (rpaphp_remove_slot(slot)) {
+		if (rpaphp_deregister_slot(slot)) {
 			printk(KERN_ERR
 				"%s: unable to remove hotplug slot %s\n",
 				__FUNCTION__, drc_name);
 			return -EIO;
 		}
 	} else {
-		rpaphp_unconfig_pci_adapter(bus);
+		struct pci_dev *dev, *tmp;
+		list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+			eeh_remove_bus_device(dev);
+			pci_remove_bus_device(dev);
+		}
 	}
 
 	if (unmap_bus_range(bus)) {
diff --git a/drivers/pci/hotplug/rpaphp.h b/drivers/pci/hotplug/rpaphp.h
index 57ea71a..310b618 100644
--- a/drivers/pci/hotplug/rpaphp.h
+++ b/drivers/pci/hotplug/rpaphp.h
@@ -88,16 +88,10 @@
 /* function prototypes */
 
 /* rpaphp_pci.c */
-extern struct pci_bus *rpaphp_find_pci_bus(struct device_node *dn);
-extern int rpaphp_claim_resource(struct pci_dev *dev, int resource);
 extern int rpaphp_enable_pci_slot(struct slot *slot);
-extern int register_pci_slot(struct slot *slot);
+extern int rpaphp_register_pci_slot(struct slot *slot);
 extern int rpaphp_get_pci_adapter_status(struct slot *slot, int is_init, u8 * value);
-extern void rpaphp_init_new_devs(struct pci_bus *bus);
-extern void rpaphp_eeh_init_nodes(struct device_node *dn);
-
-extern int rpaphp_config_pci_adapter(struct pci_bus *bus);
-extern int rpaphp_unconfig_pci_adapter(struct pci_bus *bus);
+extern int rpaphp_get_sensor_state(struct slot *slot, int *state);
 
 /* rpaphp_core.c */
 extern int rpaphp_add_slot(struct device_node *dn);
@@ -108,8 +102,8 @@
 /* rpaphp_slot.c */
 extern void dealloc_slot_struct(struct slot *slot);
 extern struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char *drc_name, int power_domain);
-extern int register_slot(struct slot *slot);
-extern int deregister_slot(struct slot *slot);
+extern int rpaphp_register_slot(struct slot *slot);
+extern int rpaphp_deregister_slot(struct slot *slot);
 extern int rpaphp_get_power_status(struct slot *slot, u8 * value);
 extern int rpaphp_set_attention_status(struct slot *slot, u8 status);
 	
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index cf075c3..6e79f56 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -56,25 +56,6 @@
 
 module_param(debug, bool, 0644);
 
-static int enable_slot(struct hotplug_slot *slot);
-static int disable_slot(struct hotplug_slot *slot);
-static int set_attention_status(struct hotplug_slot *slot, u8 value);
-static int get_power_status(struct hotplug_slot *slot, u8 * value);
-static int get_attention_status(struct hotplug_slot *slot, u8 * value);
-static int get_adapter_status(struct hotplug_slot *slot, u8 * value);
-static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_speed *value);
-
-struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
-	.owner = THIS_MODULE,
-	.enable_slot = enable_slot,
-	.disable_slot = disable_slot,
-	.set_attention_status = set_attention_status,
-	.get_power_status = get_power_status,
-	.get_attention_status = get_attention_status,
-	.get_adapter_status = get_adapter_status,
-	.get_max_bus_speed = get_max_bus_speed,
-};
-
 static int rpaphp_get_attention_status(struct slot *slot)
 {
 	return slot->hotplug_slot->info->attention_status;
@@ -196,11 +177,6 @@
 	return 0;
 }
 
-int rpaphp_remove_slot(struct slot *slot)
-{
-	return deregister_slot(slot);
-}
-
 static int get_children_props(struct device_node *dn, int **drc_indexes,
 		int **drc_names, int **drc_types, int **drc_power_domains)
 {
@@ -307,13 +283,15 @@
 	return 0;
 }
 
-/****************************************************************
+/**
+ * rpaphp_add_slot -- add hotplug or dlpar slot
+ *
  *	rpaphp not only registers PCI hotplug slots(HOTPLUG), 
  *	but also logical DR slots(EMBEDDED).
  *	HOTPLUG slot: An adapter can be physically added/removed. 
  *	EMBEDDED slot: An adapter can be logically removed/added
  *		  from/to a partition with the slot.
- ***************************************************************/
+ */
 int rpaphp_add_slot(struct device_node *dn)
 {
 	struct slot *slot;
@@ -344,7 +322,7 @@
 			dbg("Found drc-index:0x%x drc-name:%s drc-type:%s\n",
 					indexes[i + 1], name, type);
 
-			retval = register_pci_slot(slot);
+			retval = rpaphp_register_pci_slot(slot);
 		}
 	}
 exit:
@@ -393,53 +371,85 @@
 	cleanup_slots();
 }
 
+static int __enable_slot(struct slot *slot)
+{
+	int state;
+	int retval;
+
+	if (slot->state == CONFIGURED)
+		return 0;
+
+	retval = rpaphp_get_sensor_state(slot, &state);
+	if (retval)
+		return retval;
+
+	if (state == PRESENT) {
+		pcibios_add_pci_devices(slot->bus);
+		slot->state = CONFIGURED;
+	} else if (state == EMPTY) {
+		slot->state = EMPTY;
+	} else {
+		err("%s: slot[%s] is in invalid state\n", __FUNCTION__, slot->name);
+		slot->state = NOT_VALID;
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int enable_slot(struct hotplug_slot *hotplug_slot)
 {
-	int retval = 0;
+	int retval;
 	struct slot *slot = (struct slot *)hotplug_slot->private;
 
-	if (slot->state == CONFIGURED) {
-		dbg("%s: %s is already enabled\n", __FUNCTION__, slot->name);
-		goto exit;
+	down(&rpaphp_sem);
+	retval = __enable_slot(slot);
+	up(&rpaphp_sem);
+
+	return retval;
+}
+
+static int __disable_slot(struct slot *slot)
+{
+	struct pci_dev *dev, *tmp;
+
+	if (slot->state == NOT_CONFIGURED)
+		return -EINVAL;
+
+	list_for_each_entry_safe(dev, tmp, &slot->bus->devices, bus_list) {
+		eeh_remove_bus_device(dev);
+		pci_remove_bus_device(dev);
 	}
 
-	dbg("ENABLING SLOT %s\n", slot->name);
-	down(&rpaphp_sem);
-	retval = rpaphp_enable_pci_slot(slot);
-	up(&rpaphp_sem);
-exit:
-	dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
-	return retval;
+	slot->state = NOT_CONFIGURED;
+	return 0;
 }
 
 static int disable_slot(struct hotplug_slot *hotplug_slot)
 {
-	int retval = -EINVAL;
 	struct slot *slot = (struct slot *)hotplug_slot->private;
+	int retval;
 
-	dbg("%s - Entry: slot[%s]\n", __FUNCTION__, slot->name);
-
-	if (slot->state == NOT_CONFIGURED) {
-		dbg("%s: %s is already disabled\n", __FUNCTION__, slot->name);
-		goto exit;
-	}
-
-	dbg("DISABLING SLOT %s\n", slot->name);
 	down(&rpaphp_sem);
-	retval = rpaphp_unconfig_pci_adapter(slot->bus);
+	retval = __disable_slot (slot);
 	up(&rpaphp_sem);
-	slot->state = NOT_CONFIGURED;
-	info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__,
-	     slot->name);
-exit:
-	dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
+
 	return retval;
 }
 
+struct hotplug_slot_ops rpaphp_hotplug_slot_ops = {
+	.owner = THIS_MODULE,
+	.enable_slot = enable_slot,
+	.disable_slot = disable_slot,
+	.set_attention_status = set_attention_status,
+	.get_power_status = get_power_status,
+	.get_attention_status = get_attention_status,
+	.get_adapter_status = get_adapter_status,
+	.get_max_bus_speed = get_max_bus_speed,
+};
+
 module_init(rpaphp_init);
 module_exit(rpaphp_exit);
 
 EXPORT_SYMBOL_GPL(rpaphp_add_slot);
-EXPORT_SYMBOL_GPL(rpaphp_remove_slot);
 EXPORT_SYMBOL_GPL(rpaphp_slot_head);
 EXPORT_SYMBOL_GPL(rpaphp_get_drc_props);
diff --git a/drivers/pci/hotplug/rpaphp_pci.c b/drivers/pci/hotplug/rpaphp_pci.c
index 396b54b..6f6cbed 100644
--- a/drivers/pci/hotplug/rpaphp_pci.c
+++ b/drivers/pci/hotplug/rpaphp_pci.c
@@ -32,37 +32,7 @@
 #include "../pci.h"		/* for pci_add_new_bus */
 #include "rpaphp.h"
 
-static struct pci_bus *find_bus_among_children(struct pci_bus *bus,
-					struct device_node *dn)
-{
-	struct pci_bus *child = NULL;
-	struct list_head *tmp;
-	struct device_node *busdn;
-
-	busdn = pci_bus_to_OF_node(bus);
-	if (busdn == dn)
-		return bus;
-
-	list_for_each(tmp, &bus->children) {
-		child = find_bus_among_children(pci_bus_b(tmp), dn);
-		if (child)
-			break;
-	}
-	return child;
-}
-
-struct pci_bus *rpaphp_find_pci_bus(struct device_node *dn)
-{
-	struct pci_dn *pdn = dn->data;
-
-	if (!pdn  || !pdn->phb || !pdn->phb->bus)
-		return NULL;
-
-	return find_bus_among_children(pdn->phb->bus, dn);
-}
-EXPORT_SYMBOL_GPL(rpaphp_find_pci_bus);
-
-static int rpaphp_get_sensor_state(struct slot *slot, int *state)
+int rpaphp_get_sensor_state(struct slot *slot, int *state)
 {
 	int rc;
 	int setlevel;
@@ -120,7 +90,7 @@
 			/* config/unconfig adapter */
 			*value = slot->state;
 		} else {
-			bus = rpaphp_find_pci_bus(slot->dn);
+			bus = pcibios_find_pci_bus(slot->dn);
 			if (bus && !list_empty(&bus->devices))
 				*value = CONFIGURED;
 			else
@@ -131,140 +101,6 @@
 	return rc;
 }
 
-/* Must be called before pci_bus_add_devices */
-void rpaphp_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		/*
-		 * Skip already-present devices (which are on the
-		 * global device list.)
-		 */
-		if (list_empty(&dev->global_list)) {
-			int i;
-			
-			/* Need to setup IOMMU tables */
-			ppc_md.iommu_dev_setup(dev);
-
-			if(fix_bus)
-				pcibios_fixup_device_resources(dev, bus);
-			pci_read_irq_line(dev);
-			for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-				struct resource *r = &dev->resource[i];
-
-				if (r->parent || !r->start || !r->flags)
-					continue;
-				pci_claim_resource(dev, i);
-			}
-		}
-	}
-}
-
-static void rpaphp_eeh_add_bus_device(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		eeh_add_device_late(dev);
-		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-			struct pci_bus *subbus = dev->subordinate;
-			if (subbus)
-				rpaphp_eeh_add_bus_device (subbus);
-		}
-	}
-}
-
-static int rpaphp_pci_config_bridge(struct pci_dev *dev)
-{
-	u8 sec_busno;
-	struct pci_bus *child_bus;
-	struct pci_dev *child_dev;
-
-	dbg("Enter %s:  BRIDGE dev=%s\n", __FUNCTION__, pci_name(dev));
-
-	/* get busno of downstream bus */
-	pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno);
-		
-	/* add to children of PCI bridge dev->bus */
-	child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
-	if (!child_bus) {
-		err("%s: could not add second bus\n", __FUNCTION__);
-		return -EIO;
-	}
-	sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
-	/* do pci_scan_child_bus */
-	pci_scan_child_bus(child_bus);
-
-	list_for_each_entry(child_dev, &child_bus->devices, bus_list) {
-		eeh_add_device_late(child_dev);
-	}
-
-	 /* fixup new pci devices without touching bus struct */
-	rpaphp_fixup_new_pci_devices(child_bus, 0);
-
-	/* Make the discovered devices available */
-	pci_bus_add_devices(child_bus);
-	return 0;
-}
-
-void rpaphp_init_new_devs(struct pci_bus *bus)
-{
-	rpaphp_fixup_new_pci_devices(bus, 0);
-	rpaphp_eeh_add_bus_device(bus);
-}
-EXPORT_SYMBOL_GPL(rpaphp_init_new_devs);
-
-/*****************************************************************************
- rpaphp_pci_config_slot() will  configure all devices under the
- given slot->dn and return the the first pci_dev.
- *****************************************************************************/
-static struct pci_dev *
-rpaphp_pci_config_slot(struct pci_bus *bus)
-{
-	struct device_node *dn = pci_bus_to_OF_node(bus);
-	struct pci_dev *dev = NULL;
-	int slotno;
-	int num;
-
-	dbg("Enter %s: dn=%s bus=%s\n", __FUNCTION__, dn->full_name, bus->name);
-	if (!dn || !dn->child)
-		return NULL;
-
-	if (_machine == PLATFORM_PSERIES_LPAR) {
-		of_scan_bus(dn, bus);
-		if (list_empty(&bus->devices)) {
-			err("%s: No new device found\n", __FUNCTION__);
-			return NULL;
-		}
-
-		rpaphp_init_new_devs(bus);
-		pci_bus_add_devices(bus);
-		dev = list_entry(&bus->devices, struct pci_dev, bus_list);
-	} else {
-		slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
-
-		/* pci_scan_slot should find all children */
-		num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
-		if (num) {
-			rpaphp_fixup_new_pci_devices(bus, 1);
-			pci_bus_add_devices(bus);
-		}
-		if (list_empty(&bus->devices)) {
-			err("%s: No new device found\n", __FUNCTION__);
-			return NULL;
-		}
-		list_for_each_entry(dev, &bus->devices, bus_list) {
-			if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
-				rpaphp_pci_config_bridge(dev);
-
-			rpaphp_eeh_add_bus_device(bus);
-		}
-	}
-
-	return dev;
-}
-
 static void print_slot_pci_funcs(struct pci_bus *bus)
 {
 	struct device_node *dn;
@@ -280,60 +116,6 @@
 	return;
 }
 
-int rpaphp_config_pci_adapter(struct pci_bus *bus)
-{
-	struct device_node *dn = pci_bus_to_OF_node(bus);
-	struct pci_dev *dev;
-	int rc = -ENODEV;
-
-	dbg("Entry %s: slot[%s]\n", __FUNCTION__, dn->full_name);
-	if (!dn)
-		goto exit;
-
-	eeh_add_device_tree_early(dn);
-	dev = rpaphp_pci_config_slot(bus);
-	if (!dev) {
-		err("%s: can't find any devices.\n", __FUNCTION__);
-		goto exit;
-	}
-	print_slot_pci_funcs(bus);
-	rc = 0;
-exit:
-	dbg("Exit %s:  rc=%d\n", __FUNCTION__, rc);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(rpaphp_config_pci_adapter);
-
-static void rpaphp_eeh_remove_bus_device(struct pci_dev *dev)
-{
-	eeh_remove_device(dev);
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		struct pci_bus *bus = dev->subordinate;
-		struct list_head *ln;
-		if (!bus)
-			return; 
-		for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
-			struct pci_dev *pdev = pci_dev_b(ln);
-			if (pdev)
-				rpaphp_eeh_remove_bus_device(pdev);
-		}
-
-	}
-	return;
-}
-
-int rpaphp_unconfig_pci_adapter(struct pci_bus *bus)
-{
-	struct pci_dev *dev, *tmp;
-
-	list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
-		rpaphp_eeh_remove_bus_device(dev);
-		pci_remove_bus_device(dev);
-	}
-	return 0;
-}
-EXPORT_SYMBOL_GPL(rpaphp_unconfig_pci_adapter);
-
 static int setup_pci_hotplug_slot_info(struct slot *slot)
 {
 	struct hotplug_slot_info *hotplug_slot_info = slot->hotplug_slot->info;
@@ -370,7 +152,7 @@
 	struct pci_bus *bus;
 
 	BUG_ON(!dn);
-	bus = rpaphp_find_pci_bus(dn);
+	bus = pcibios_find_pci_bus(dn);
 	if (!bus) {
 		err("%s: no pci_bus for dn %s\n", __FUNCTION__, dn->full_name);
 		goto exit_rc;
@@ -395,10 +177,7 @@
 		if (slot->hotplug_slot->info->adapter_status == NOT_CONFIGURED) {
 			dbg("%s CONFIGURING pci adapter in slot[%s]\n",  
 				__FUNCTION__, slot->name);
-			if (rpaphp_config_pci_adapter(slot->bus)) {
-				err("%s: CONFIG pci adapter failed\n", __FUNCTION__);
-				goto exit_rc;		
-			}
+			pcibios_add_pci_devices(slot->bus);
 
 		} else if (slot->hotplug_slot->info->adapter_status != CONFIGURED) {
 			err("%s: slot[%s]'s adapter_status is NOT_VALID.\n",
@@ -420,7 +199,7 @@
 	return -EINVAL;
 }
 
-int register_pci_slot(struct slot *slot)
+int rpaphp_register_pci_slot(struct slot *slot)
 {
 	int rc = -EINVAL;
 
@@ -428,42 +207,8 @@
 		goto exit_rc;
 	if (setup_pci_slot(slot))
 		goto exit_rc;
-	rc = register_slot(slot);
+	rc = rpaphp_register_slot(slot);
 exit_rc:
 	return rc;
 }
 
-int rpaphp_enable_pci_slot(struct slot *slot)
-{
-	int retval = 0, state;
-
-	retval = rpaphp_get_sensor_state(slot, &state);
-	if (retval)
-		goto exit;
-	dbg("%s: sensor state[%d]\n", __FUNCTION__, state);
-	/* if slot is not empty, enable the adapter */
-	if (state == PRESENT) {
-		dbg("%s : slot[%s] is occupied.\n", __FUNCTION__, slot->name);
-		retval = rpaphp_config_pci_adapter(slot->bus);
-		if (!retval) {
-			slot->state = CONFIGURED;
-			info("%s: devices in slot[%s] configured\n",
-					__FUNCTION__, slot->name);
-		} else {
-			slot->state = NOT_CONFIGURED;
-			dbg("%s: no pci_dev struct for adapter in slot[%s]\n",
-			    __FUNCTION__, slot->name);
-		}
-	} else if (state == EMPTY) {
-		dbg("%s : slot[%s] is empty\n", __FUNCTION__, slot->name);
-		slot->state = EMPTY;
-	} else {
-		err("%s: slot[%s] is in invalid state\n", __FUNCTION__,
-		    slot->name);
-		slot->state = NOT_VALID;
-		retval = -EINVAL;
-	}
-exit:
-	dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
-	return retval;
-}
diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c
index daa89ae..04cc1e7 100644
--- a/drivers/pci/hotplug/rpaphp_slot.c
+++ b/drivers/pci/hotplug/rpaphp_slot.c
@@ -35,16 +35,16 @@
 
 static ssize_t location_read_file (struct hotplug_slot *php_slot, char *buf)
 {
-        char *value;
-        int retval = -ENOENT;
+	char *value;
+	int retval = -ENOENT;
 	struct slot *slot = (struct slot *)php_slot->private;
 
 	if (!slot)
 		return retval;
 
-        value = slot->location;
-        retval = sprintf (buf, "%s\n", value);
-        return retval;
+	value = slot->location;
+	retval = sprintf (buf, "%s\n", value);
+	return retval;
 }
 
 static struct hotplug_slot_attribute hotplug_slot_attr_location = {
@@ -137,7 +137,7 @@
 	return 0;
 }
 
-int deregister_slot(struct slot *slot)
+int rpaphp_deregister_slot(struct slot *slot)
 {
 	int retval = 0;
 	struct hotplug_slot *php_slot = slot->hotplug_slot;
@@ -160,7 +160,7 @@
 	return retval;
 }
 
-int register_slot(struct slot *slot)
+int rpaphp_register_slot(struct slot *slot)
 {
 	int retval;
 
@@ -169,7 +169,7 @@
 		slot->power_domain, slot->type);
 	/* should not try to register the same slot twice */
 	if (is_registered(slot)) { /* should't be here */
-		err("register_slot: slot[%s] is already registered\n", slot->name);
+		err("rpaphp_register_slot: slot[%s] is already registered\n", slot->name);
 		rpaphp_release_slot(slot->hotplug_slot);
 		return -EAGAIN;
 	}	
diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h
index ce0e9b6..7d6f521 100644
--- a/drivers/pci/hotplug/shpchp.h
+++ b/drivers/pci/hotplug/shpchp.h
@@ -95,6 +95,7 @@
 	u8 function;
 	u8 slot_device_offset;
 	u8 add_support;
+	u32 pcix_misc2_reg;	/* for amd pogo errata */
 	enum pci_bus_speed speed;
 	u32 first_slot;		/* First physical slot number */
 	u8 slot_bus;		/* Bus where the slots handled by this controller sit */
@@ -113,6 +114,26 @@
 
 /* Define AMD SHPC ID  */
 #define PCI_DEVICE_ID_AMD_GOLAM_7450	0x7450 
+#define PCI_DEVICE_ID_AMD_POGO_7458	0x7458
+
+/* AMD PCIX bridge registers */
+
+#define PCIX_MEM_BASE_LIMIT_OFFSET	0x1C
+#define PCIX_MISCII_OFFSET		0x48
+#define PCIX_MISC_BRIDGE_ERRORS_OFFSET	0x80
+
+/* AMD PCIX_MISCII masks and offsets */
+#define PERRNONFATALENABLE_MASK		0x00040000
+#define PERRFATALENABLE_MASK		0x00080000
+#define PERRFLOODENABLE_MASK		0x00100000
+#define SERRNONFATALENABLE_MASK		0x00200000
+#define SERRFATALENABLE_MASK		0x00400000
+
+/* AMD PCIX_MISC_BRIDGE_ERRORS masks and offsets */
+#define PERR_OBSERVED_MASK		0x00000001
+
+/* AMD PCIX_MEM_BASE_LIMIT masks */
+#define RSE_MASK			0x40000000
 
 #define INT_BUTTON_IGNORE		0
 #define INT_PRESENCE_ON			1
@@ -333,6 +354,79 @@
 	return retval;
 }
 
+static inline void amd_pogo_errata_save_misc_reg(struct slot *p_slot)
+{
+	u32 pcix_misc2_temp;
+
+	/* save MiscII register */
+	pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, &pcix_misc2_temp);
+
+	p_slot->ctrl->pcix_misc2_reg = pcix_misc2_temp;
+
+	/* clear SERR/PERR enable bits */
+	pcix_misc2_temp &= ~SERRFATALENABLE_MASK;
+	pcix_misc2_temp &= ~SERRNONFATALENABLE_MASK;
+	pcix_misc2_temp &= ~PERRFLOODENABLE_MASK;
+	pcix_misc2_temp &= ~PERRFATALENABLE_MASK;
+	pcix_misc2_temp &= ~PERRNONFATALENABLE_MASK;
+	pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp);
+}
+
+static inline void amd_pogo_errata_restore_misc_reg(struct slot *p_slot)
+{
+	u32 pcix_misc2_temp;
+	u32 pcix_bridge_errors_reg;
+	u32 pcix_mem_base_reg;
+	u8  perr_set;
+	u8  rse_set;
+
+	/* write-one-to-clear Bridge_Errors[ PERR_OBSERVED ] */
+	pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, &pcix_bridge_errors_reg);
+	perr_set = pcix_bridge_errors_reg & PERR_OBSERVED_MASK;
+	if (perr_set) {
+		dbg ("%s  W1C: Bridge_Errors[ PERR_OBSERVED = %08X]\n",__FUNCTION__ , perr_set);
+
+		pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISC_BRIDGE_ERRORS_OFFSET, perr_set);
+	}
+
+	/* write-one-to-clear Memory_Base_Limit[ RSE ] */
+	pci_read_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, &pcix_mem_base_reg);
+	rse_set = pcix_mem_base_reg & RSE_MASK;
+	if (rse_set) {
+		dbg ("%s  W1C: Memory_Base_Limit[ RSE ]\n",__FUNCTION__ );
+
+		pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MEM_BASE_LIMIT_OFFSET, rse_set);
+	}
+	/* restore MiscII register */
+	pci_read_config_dword( p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, &pcix_misc2_temp );
+
+	if (p_slot->ctrl->pcix_misc2_reg & SERRFATALENABLE_MASK)
+		pcix_misc2_temp |= SERRFATALENABLE_MASK;
+	else
+		pcix_misc2_temp &= ~SERRFATALENABLE_MASK;
+
+	if (p_slot->ctrl->pcix_misc2_reg & SERRNONFATALENABLE_MASK)
+		pcix_misc2_temp |= SERRNONFATALENABLE_MASK;
+	else
+		pcix_misc2_temp &= ~SERRNONFATALENABLE_MASK;
+
+	if (p_slot->ctrl->pcix_misc2_reg & PERRFLOODENABLE_MASK)
+		pcix_misc2_temp |= PERRFLOODENABLE_MASK;
+	else
+		pcix_misc2_temp &= ~PERRFLOODENABLE_MASK;
+
+	if (p_slot->ctrl->pcix_misc2_reg & PERRFATALENABLE_MASK)
+		pcix_misc2_temp |= PERRFATALENABLE_MASK;
+	else
+		pcix_misc2_temp &= ~PERRFATALENABLE_MASK;
+
+	if (p_slot->ctrl->pcix_misc2_reg & PERRNONFATALENABLE_MASK)
+		pcix_misc2_temp |= PERRNONFATALENABLE_MASK;
+	else
+		pcix_misc2_temp &= ~PERRNONFATALENABLE_MASK;
+	pci_write_config_dword(p_slot->ctrl->pci_dev, PCIX_MISCII_OFFSET, pcix_misc2_temp);
+}
+
 #define SLOT_NAME_SIZE 10
 
 static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot)
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index 25ccb0e..643252d 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -894,7 +894,17 @@
 	dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save);
 	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 
-	rc = board_added(p_slot);
+	if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
+	    (p_slot->ctrl->pci_dev->device == PCI_DEVICE_ID_AMD_POGO_7458))
+	     && p_slot->ctrl->num_slots == 1) {
+		/* handle amd pogo errata; this must be done before enable  */
+		amd_pogo_errata_save_misc_reg(p_slot);
+		rc = board_added(p_slot);
+		/* handle amd pogo errata; this must be done after enable  */
+		amd_pogo_errata_restore_misc_reg(p_slot);
+	} else
+		rc = board_added(p_slot);
+
 	if (rc) {
 		p_slot->hpc_ops->get_adapter_status(p_slot,
 				&(p_slot->presence_save));
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 8e1ba0b..48723d6 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -137,6 +137,8 @@
 		break;
 	}
 }
+#else
+#define set_msi_affinity NULL
 #endif /* CONFIG_SMP */
 
 static void mask_MSI_irq(unsigned int vector)
@@ -214,7 +216,7 @@
 	.disable	= mask_MSI_irq,
 	.ack		= mask_MSI_irq,
 	.end		= end_msi_irq_w_maskbit,
-	.set_affinity	= set_msi_irq_affinity
+	.set_affinity	= set_msi_affinity
 };
 
 /*
@@ -230,7 +232,7 @@
 	.disable	= mask_MSI_irq,
 	.ack		= mask_MSI_irq,
 	.end		= end_msi_irq_w_maskbit,
-	.set_affinity	= set_msi_irq_affinity
+	.set_affinity	= set_msi_affinity
 };
 
 /*
@@ -246,7 +248,7 @@
 	.disable	= do_nothing,
 	.ack		= do_nothing,
 	.end		= end_msi_irq_wo_maskbit,
-	.set_affinity	= set_msi_irq_affinity
+	.set_affinity	= set_msi_affinity
 };
 
 static void msi_data_init(struct msg_data *msi_data,
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index 402136a..4ac52d4 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -22,12 +22,6 @@
 extern void (*interrupt[NR_IRQS])(void);
 extern int pci_vector_resources(int last, int nr_released);
 
-#ifdef CONFIG_SMP
-#define set_msi_irq_affinity	set_msi_affinity
-#else
-#define set_msi_irq_affinity	NULL
-#endif
-
 /*
  * MSI-X Address Register
  */
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d2a633e..d2d1879 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -163,6 +163,7 @@
 	return __pci_bus_find_cap(bus, devfn, hdr_type & 0x7f, cap);
 }
 
+#if 0
 /**
  * pci_find_ext_capability - Find an extended capability
  * @dev: PCI device to query
@@ -210,6 +211,7 @@
 
 	return 0;
 }
+#endif  /*  0  */
 
 /**
  * pci_find_parent_resource - return resource region of parent bus of given region
diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c
index 50d6685..ea9277b 100644
--- a/drivers/pci/setup-res.c
+++ b/drivers/pci/setup-res.c
@@ -112,6 +112,7 @@
 
 	return err;
 }
+EXPORT_SYMBOL_GPL(pci_claim_resource);
 
 int pci_assign_resource(struct pci_dev *dev, int resno)
 {
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 3639c3f..36e476d 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -38,6 +38,7 @@
 
 obj-$(CONFIG_USB_DABUSB)	+= media/
 obj-$(CONFIG_USB_DSBR)		+= media/
+obj-$(CONFIG_USB_ET61X251)	+= media/
 obj-$(CONFIG_USB_IBMCAM)	+= media/
 obj-$(CONFIG_USB_KONICAWC)	+= media/
 obj-$(CONFIG_USB_OV511)		+= media/
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index af0a41e..04631dc 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -36,6 +36,7 @@
 #include <linux/init.h>
 #include <linux/device.h>	/* FIXME: linux/firmware.h should include it itself */
 #include <linux/firmware.h>
+#include <linux/mutex.h>
 
 #include "usbatm.h"
 
@@ -160,7 +161,7 @@
 	struct work_struct poll_work;
 
 	/* contol handles */
-	struct semaphore cm_serialize;
+	struct mutex cm_serialize;
 	u8 *rcv_buf;
 	u8 *snd_buf;
 	struct urb *rcv_urb;
@@ -219,7 +220,7 @@
 		goto fail;
 	}
 
-	down(&instance->cm_serialize);
+	mutex_lock(&instance->cm_serialize);
 
 	/* submit reading urb before the writing one */
 	init_completion(&instance->rcv_done);
@@ -288,7 +289,7 @@
 	ret = offd;
 	dbg("cm %#x", cm);
 fail:
-	up(&instance->cm_serialize);
+	mutex_unlock(&instance->cm_serialize);
 	return ret;
 }
 
@@ -352,7 +353,6 @@
 		struct atm_dev *atm_dev)
 {
 	struct cxacru_data *instance = usbatm_instance->driver_data;
-	struct device *dev = &usbatm_instance->usb_intf->dev;
 	/*
 	struct atm_dev *atm_dev = usbatm_instance->atm_dev;
 	*/
@@ -364,14 +364,14 @@
 	ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_MAC_ADDRESS, NULL, 0,
 			atm_dev->esi, sizeof(atm_dev->esi));
 	if (ret < 0) {
-		dev_err(dev, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret);
+		atm_err(usbatm_instance, "cxacru_atm_start: CARD_GET_MAC_ADDRESS returned %d\n", ret);
 		return ret;
 	}
 
 	/* start ADSL */
 	ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
 	if (ret < 0) {
-		dev_err(dev, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
+		atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
 		return ret;
 	}
 
@@ -383,13 +383,13 @@
 static void cxacru_poll_status(struct cxacru_data *instance)
 {
 	u32 buf[CXINF_MAX] = {};
-	struct device *dev = &instance->usbatm->usb_intf->dev;
-	struct atm_dev *atm_dev = instance->usbatm->atm_dev;
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct atm_dev *atm_dev = usbatm->atm_dev;
 	int ret;
 
 	ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX);
 	if (ret < 0) {
-		dev_warn(dev, "poll status: error %d\n", ret);
+		atm_warn(usbatm, "poll status: error %d\n", ret);
 		goto reschedule;
 	}
 
@@ -400,50 +400,50 @@
 	switch (instance->line_status) {
 	case 0:
 		atm_dev->signal = ATM_PHY_SIG_LOST;
-		dev_info(dev, "ADSL line: down\n");
+		atm_info(usbatm, "ADSL line: down\n");
 		break;
 
 	case 1:
 		atm_dev->signal = ATM_PHY_SIG_LOST;
-		dev_info(dev, "ADSL line: attemtping to activate\n");
+		atm_info(usbatm, "ADSL line: attempting to activate\n");
 		break;
 
 	case 2:
 		atm_dev->signal = ATM_PHY_SIG_LOST;
-		dev_info(dev, "ADSL line: training\n");
+		atm_info(usbatm, "ADSL line: training\n");
 		break;
 
 	case 3:
 		atm_dev->signal = ATM_PHY_SIG_LOST;
-		dev_info(dev, "ADSL line: channel analysis\n");
+		atm_info(usbatm, "ADSL line: channel analysis\n");
 		break;
 
 	case 4:
 		atm_dev->signal = ATM_PHY_SIG_LOST;
-		dev_info(dev, "ADSL line: exchange\n");
+		atm_info(usbatm, "ADSL line: exchange\n");
 		break;
 
 	case 5:
 		atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424;
 		atm_dev->signal = ATM_PHY_SIG_FOUND;
 
-		dev_info(dev, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
+		atm_info(usbatm, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
 		     buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]);
 		break;
 
 	case 6:
 		atm_dev->signal = ATM_PHY_SIG_LOST;
-		dev_info(dev, "ADSL line: waiting\n");
+		atm_info(usbatm, "ADSL line: waiting\n");
 		break;
 
 	case 7:
 		atm_dev->signal = ATM_PHY_SIG_LOST;
-		dev_info(dev, "ADSL line: initializing\n");
+		atm_info(usbatm, "ADSL line: initializing\n");
 		break;
 
 	default:
 		atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
-		dev_info(dev, "Unknown line state %02x\n", instance->line_status);
+		atm_info(usbatm, "Unknown line state %02x\n", instance->line_status);
 		break;
 	}
 reschedule:
@@ -504,8 +504,8 @@
 {
 	int ret;
 	int off;
-	struct usb_device *usb_dev = instance->usbatm->usb_dev;
-	struct device *dev = &instance->usbatm->usb_intf->dev;
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct usb_device *usb_dev = usbatm->usb_dev;
 	u16 signature[] = { usb_dev->descriptor.idVendor, usb_dev->descriptor.idProduct };
 	u32 val;
 
@@ -515,7 +515,7 @@
 	val = cpu_to_le32(instance->modem_type->pll_f_clk);
 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLFCLK_ADDR, (u8 *) &val, 4);
 	if (ret) {
-		dev_err(dev, "FirmwarePllFClkValue failed: %d\n", ret);
+		usb_err(usbatm, "FirmwarePllFClkValue failed: %d\n", ret);
 		return;
 	}
 
@@ -523,7 +523,7 @@
 	val = cpu_to_le32(instance->modem_type->pll_b_clk);
 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, PLLBCLK_ADDR, (u8 *) &val, 4);
 	if (ret) {
-		dev_err(dev, "FirmwarePllBClkValue failed: %d\n", ret);
+		usb_err(usbatm, "FirmwarePllBClkValue failed: %d\n", ret);
 		return;
 	}
 
@@ -531,14 +531,14 @@
 	val = cpu_to_le32(SDRAM_ENA);
 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SDRAMEN_ADDR, (u8 *) &val, 4);
 	if (ret) {
-		dev_err(dev, "Enable SDRAM failed: %d\n", ret);
+		usb_err(usbatm, "Enable SDRAM failed: %d\n", ret);
 		return;
 	}
 
 	/* Firmware */
 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, FW_ADDR, fw->data, fw->size);
 	if (ret) {
-		dev_err(dev, "Firmware upload failed: %d\n", ret);
+		usb_err(usbatm, "Firmware upload failed: %d\n", ret);
 		return;
 	}
 
@@ -546,7 +546,7 @@
 	if (instance->modem_type->boot_rom_patch) {
 		ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_ADDR, bp->data, bp->size);
 		if (ret) {
-			dev_err(dev, "Boot ROM patching failed: %d\n", ret);
+			usb_err(usbatm, "Boot ROM patching failed: %d\n", ret);
 			return;
 		}
 	}
@@ -554,7 +554,7 @@
 	/* Signature */
 	ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, SIG_ADDR, (u8 *) signature, 4);
 	if (ret) {
-		dev_err(dev, "Signature storing failed: %d\n", ret);
+		usb_err(usbatm, "Signature storing failed: %d\n", ret);
 		return;
 	}
 
@@ -566,7 +566,7 @@
 		ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0);
 	}
 	if (ret) {
-		dev_err(dev, "Passing control to firmware failed: %d\n", ret);
+		usb_err(usbatm, "Passing control to firmware failed: %d\n", ret);
 		return;
 	}
 
@@ -580,7 +580,7 @@
 
 	ret = cxacru_cm(instance, CM_REQUEST_CARD_GET_STATUS, NULL, 0, NULL, 0);
 	if (ret < 0) {
-		dev_err(dev, "modem failed to initialize: %d\n", ret);
+		usb_err(usbatm, "modem failed to initialize: %d\n", ret);
 		return;
 	}
 
@@ -597,7 +597,7 @@
 			ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
 					(u8 *) buf, len, NULL, 0);
 			if (ret < 0) {
-				dev_err(dev, "load config data failed: %d\n", ret);
+				usb_err(usbatm, "load config data failed: %d\n", ret);
 				return;
 			}
 		}
@@ -608,18 +608,19 @@
 static int cxacru_find_firmware(struct cxacru_data *instance,
 				char* phase, const struct firmware **fw_p)
 {
-	struct device *dev = &instance->usbatm->usb_intf->dev;
+	struct usbatm_data *usbatm = instance->usbatm;
+	struct device *dev = &usbatm->usb_intf->dev;
 	char buf[16];
 
 	sprintf(buf, "cxacru-%s.bin", phase);
 	dbg("cxacru_find_firmware: looking for %s", buf);
 
 	if (request_firmware(fw_p, buf, dev)) {
-		dev_dbg(dev, "no stage %s firmware found\n", phase);
+		usb_dbg(usbatm, "no stage %s firmware found\n", phase);
 		return -ENOENT;
 	}
 
-	dev_info(dev, "found firmware %s\n", buf);
+	usb_info(usbatm, "found firmware %s\n", buf);
 
 	return 0;
 }
@@ -627,20 +628,19 @@
 static int cxacru_heavy_init(struct usbatm_data *usbatm_instance,
 			     struct usb_interface *usb_intf)
 {
-	struct device *dev = &usbatm_instance->usb_intf->dev;
 	const struct firmware *fw, *bp, *cf;
 	struct cxacru_data *instance = usbatm_instance->driver_data;
 
 	int ret = cxacru_find_firmware(instance, "fw", &fw);
 	if (ret) {
-		dev_warn(dev, "firmware (cxacru-fw.bin) unavailable (hotplug misconfiguration?)\n");
+		usb_warn(usbatm_instance, "firmware (cxacru-fw.bin) unavailable (system misconfigured?)\n");
 		return ret;
 	}
 
 	if (instance->modem_type->boot_rom_patch) {
 		ret = cxacru_find_firmware(instance, "bp", &bp);
 		if (ret) {
-			dev_warn(dev, "boot ROM patch (cxacru-bp.bin) unavailable (hotplug misconfiguration?)\n");
+			usb_warn(usbatm_instance, "boot ROM patch (cxacru-bp.bin) unavailable (system misconfigured?)\n");
 			release_firmware(fw);
 			return ret;
 		}
@@ -667,22 +667,19 @@
 }
 
 static int cxacru_bind(struct usbatm_data *usbatm_instance,
-		       struct usb_interface *intf, const struct usb_device_id *id,
-		       int *need_heavy_init)
+		       struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct cxacru_data *instance;
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	int ret;
 
 	/* instance init */
-	instance = kmalloc(sizeof(*instance), GFP_KERNEL);
+	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
 	if (!instance) {
 		dbg("cxacru_bind: no memory for instance data");
 		return -ENOMEM;
 	}
 
-	memset(instance, 0, sizeof(*instance));
-
 	instance->usbatm = usbatm_instance;
 	instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
 
@@ -721,13 +718,13 @@
 			instance->snd_buf, PAGE_SIZE,
 			cxacru_blocking_completion, &instance->snd_done, 4);
 
-	init_MUTEX(&instance->cm_serialize);
+	mutex_init(&instance->cm_serialize);
 
 	INIT_WORK(&instance->poll_work, (void *)cxacru_poll_status, instance);
 
 	usbatm_instance->driver_data = instance;
 
-	*need_heavy_init = cxacru_card_status(instance);
+	usbatm_instance->flags = (cxacru_card_status(instance) ? 0 : UDSL_SKIP_HEAVY_INIT);
 
 	return 0;
 
@@ -787,12 +784,12 @@
 	{ /* V = Conexant			P = ADSL modem (Hasbani project)	*/
 		USB_DEVICE(0x0572, 0xcb00),	.driver_info = (unsigned long) &cxacru_cb00
 	},
-	{ /* V = Conexant             P = ADSL modem (Well PTI-800 */
-		USB_DEVICE(0x0572, 0xcb02),	.driver_info = (unsigned long) &cxacru_cb00
-	},
 	{ /* V = Conexant			P = ADSL modem				*/
 		USB_DEVICE(0x0572, 0xcb01),	.driver_info = (unsigned long) &cxacru_cb00
 	},
+	{ /* V = Conexant			P = ADSL modem (Well PTI-800) */
+		USB_DEVICE(0x0572, 0xcb02),	.driver_info = (unsigned long) &cxacru_cb00
+	},
 	{ /* V = Conexant			P = ADSL modem				*/
 		USB_DEVICE(0x0572, 0xcb06),	.driver_info = (unsigned long) &cxacru_cb00
 	},
@@ -835,14 +832,13 @@
 MODULE_DEVICE_TABLE(usb, cxacru_usb_ids);
 
 static struct usbatm_driver cxacru_driver = {
-	.owner		= THIS_MODULE,
 	.driver_name	= cxacru_driver_name,
 	.bind		= cxacru_bind,
 	.heavy_init	= cxacru_heavy_init,
 	.unbind		= cxacru_unbind,
 	.atm_start	= cxacru_atm_start,
-	.in		= CXACRU_EP_DATA,
-	.out		= CXACRU_EP_DATA,
+	.bulk_in	= CXACRU_EP_DATA,
+	.bulk_out	= CXACRU_EP_DATA,
 	.rx_padding	= 3,
 	.tx_padding	= 11,
 };
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index c1b47d7..7860c8a 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -35,12 +35,14 @@
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/usb_ch9.h>
 #include <linux/workqueue.h>
 
 #include "usbatm.h"
 
 #define DRIVER_AUTHOR	"Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
-#define DRIVER_VERSION	"1.9"
+#define DRIVER_VERSION	"1.10"
 #define DRIVER_DESC	"Alcatel SpeedTouch USB driver version " DRIVER_VERSION
 
 static const char speedtch_driver_name[] = "speedtch";
@@ -66,31 +68,42 @@
 
 #define RESUBMIT_DELAY		1000	/* milliseconds */
 
-#define DEFAULT_ALTSETTING	1
+#define DEFAULT_BULK_ALTSETTING	1
+#define DEFAULT_ISOC_ALTSETTING	2
 #define DEFAULT_DL_512_FIRST	0
+#define DEFAULT_ENABLE_ISOC	0
 #define DEFAULT_SW_BUFFERING	0
 
-static int altsetting = DEFAULT_ALTSETTING;
+static unsigned int altsetting = 0; /* zero means: use the default */
 static int dl_512_first = DEFAULT_DL_512_FIRST;
+static int enable_isoc = DEFAULT_ENABLE_ISOC;
 static int sw_buffering = DEFAULT_SW_BUFFERING;
 
-module_param(altsetting, int, S_IRUGO | S_IWUSR);
+module_param(altsetting, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(altsetting,
-		 "Alternative setting for data interface (default: "
-		 __MODULE_STRING(DEFAULT_ALTSETTING) ")");
+		"Alternative setting for data interface (bulk_default: "
+		__MODULE_STRING(DEFAULT_BULK_ALTSETTING) "; isoc_default: "
+		__MODULE_STRING(DEFAULT_ISOC_ALTSETTING) ")");
 
 module_param(dl_512_first, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(dl_512_first,
 		 "Read 512 bytes before sending firmware (default: "
 		 __MODULE_STRING(DEFAULT_DL_512_FIRST) ")");
 
+module_param(enable_isoc, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_isoc,
+		"Use isochronous transfers if available (default: "
+		__MODULE_STRING(DEFAULT_ENABLE_ISOC) ")");
+
 module_param(sw_buffering, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(sw_buffering,
 		 "Enable software buffering (default: "
 		 __MODULE_STRING(DEFAULT_SW_BUFFERING) ")");
 
+#define INTERFACE_DATA		1
 #define ENDPOINT_INT		0x81
-#define ENDPOINT_DATA		0x07
+#define ENDPOINT_BULK_DATA	0x07
+#define ENDPOINT_ISOC_DATA	0x07
 #define ENDPOINT_FIRMWARE	0x05
 
 #define hex2int(c) ( (c >= '0') && (c <= '9') ? (c - '0') : ((c & 0xf) + 9) )
@@ -98,6 +111,8 @@
 struct speedtch_instance_data {
 	struct usbatm_data *usbatm;
 
+	unsigned int altsetting;
+
 	struct work_struct status_checker;
 
 	unsigned char last_status;
@@ -205,7 +220,7 @@
 				   buffer, 0x200, &actual_length, 2000);
 
 		if (ret < 0 && ret != -ETIMEDOUT)
-			usb_dbg(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
+			usb_warn(usbatm, "%s: read BLOCK0 from modem failed (%d)!\n", __func__, ret);
 		else
 			usb_dbg(usbatm, "%s: BLOCK0 downloaded (%d bytes)\n", __func__, ret);
 	}
@@ -219,7 +234,7 @@
 				   buffer, thislen, &actual_length, DATA_TIMEOUT);
 
 		if (ret < 0) {
-			usb_dbg(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
+			usb_err(usbatm, "%s: write BLOCK1 to modem failed (%d)!\n", __func__, ret);
 			goto out_free;
 		}
 		usb_dbg(usbatm, "%s: BLOCK1 uploaded (%zu bytes)\n", __func__, fw1->size);
@@ -232,7 +247,7 @@
 			   buffer, 0x200, &actual_length, DATA_TIMEOUT);
 
 	if (ret < 0) {
-		usb_dbg(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
+		usb_err(usbatm, "%s: read BLOCK2 from modem failed (%d)!\n", __func__, ret);
 		goto out_free;
 	}
 	usb_dbg(usbatm, "%s: BLOCK2 downloaded (%d bytes)\n", __func__, actual_length);
@@ -246,7 +261,7 @@
 				   buffer, thislen, &actual_length, DATA_TIMEOUT);
 
 		if (ret < 0) {
-			usb_dbg(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
+			usb_err(usbatm, "%s: write BLOCK3 to modem failed (%d)!\n", __func__, ret);
 			goto out_free;
 		}
 	}
@@ -259,7 +274,7 @@
 			   buffer, 0x200, &actual_length, DATA_TIMEOUT);
 
 	if (ret < 0) {
-		usb_dbg(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
+		usb_err(usbatm, "%s: read BLOCK4 from modem failed (%d)!\n", __func__, ret);
 		goto out_free;
 	}
 
@@ -270,6 +285,11 @@
 	   because we're in our own kernel thread anyway. */
 	msleep_interruptible(1000);
 
+	if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
+		usb_err(usbatm, "%s: setting interface to %d failed (%d)!\n", __func__, instance->altsetting, ret);
+		goto out_free;
+	}
+
 	/* Enable software buffering, if requested */
 	if (sw_buffering)
 		speedtch_set_swbuff(instance, 1);
@@ -285,8 +305,8 @@
 	return ret;
 }
 
-static int speedtch_find_firmware(struct usb_interface *intf, int phase,
-				  const struct firmware **fw_p)
+static int speedtch_find_firmware(struct usbatm_data *usbatm, struct usb_interface *intf,
+				  int phase, const struct firmware **fw_p)
 {
 	struct device *dev = &intf->dev;
 	const u16 bcdDevice = le16_to_cpu(interface_to_usbdev(intf)->descriptor.bcdDevice);
@@ -295,24 +315,24 @@
 	char buf[24];
 
 	sprintf(buf, "speedtch-%d.bin.%x.%02x", phase, major_revision, minor_revision);
-	dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+	usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
 
 	if (request_firmware(fw_p, buf, dev)) {
 		sprintf(buf, "speedtch-%d.bin.%x", phase, major_revision);
-		dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+		usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
 
 		if (request_firmware(fw_p, buf, dev)) {
 			sprintf(buf, "speedtch-%d.bin", phase);
-			dev_dbg(dev, "%s: looking for %s\n", __func__, buf);
+			usb_dbg(usbatm, "%s: looking for %s\n", __func__, buf);
 
 			if (request_firmware(fw_p, buf, dev)) {
-				dev_warn(dev, "no stage %d firmware found!\n", phase);
+				usb_err(usbatm, "%s: no stage %d firmware found!\n", __func__, phase);
 				return -ENOENT;
 			}
 		}
 	}
 
-	dev_info(dev, "found stage %d firmware %s\n", phase, buf);
+	usb_info(usbatm, "found stage %d firmware %s\n", phase, buf);
 
 	return 0;
 }
@@ -323,15 +343,16 @@
 	struct speedtch_instance_data *instance = usbatm->driver_data;
 	int ret;
 
-	if ((ret = speedtch_find_firmware(intf, 1, &fw1)) < 0)
-			return ret;
+	if ((ret = speedtch_find_firmware(usbatm, intf, 1, &fw1)) < 0)
+		return ret;
 
-	if ((ret = speedtch_find_firmware(intf, 2, &fw2)) < 0) {
+	if ((ret = speedtch_find_firmware(usbatm, intf, 2, &fw2)) < 0) {
 		release_firmware(fw1);
 		return ret;
 	}
 
-	ret = speedtch_upload_firmware(instance, fw1, fw2);
+	if ((ret = speedtch_upload_firmware(instance, fw1, fw2)) < 0)
+		usb_err(usbatm, "%s: firmware upload failed (%d)!\n", __func__, ret);
 
 	release_firmware(fw2);
 	release_firmware(fw1);
@@ -428,7 +449,9 @@
 	int down_speed, up_speed, ret;
 	unsigned char status;
 
+#ifdef VERBOSE_DEBUG
 	atm_dbg(usbatm, "%s entered\n", __func__);
+#endif
 
 	ret = speedtch_read_status(instance);
 	if (ret < 0) {
@@ -441,9 +464,9 @@
 
 	status = buf[OFFSET_7];
 
-	atm_dbg(usbatm, "%s: line state %02x\n", __func__, status);
-
 	if ((status != instance->last_status) || !status) {
+		atm_dbg(usbatm, "%s: line state 0x%02x\n", __func__, status);
+
 		switch (status) {
 		case 0:
 			atm_dev->signal = ATM_PHY_SIG_LOST;
@@ -484,7 +507,7 @@
 
 		default:
 			atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
-			atm_info(usbatm, "Unknown line state %02x\n", status);
+			atm_info(usbatm, "unknown line state %02x\n", status);
 			break;
 		}
 
@@ -583,11 +606,6 @@
 
 	atm_dbg(usbatm, "%s entered\n", __func__);
 
-	if ((ret = usb_set_interface(usb_dev, 1, altsetting)) < 0) {
-		atm_dbg(usbatm, "%s: usb_set_interface returned %d!\n", __func__, ret);
-		return ret;
-	}
-
 	/* Set MAC address, it is stored in the serial number */
 	memset(atm_dev->esi, 0, sizeof(atm_dev->esi));
 	if (usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, mac_str, sizeof(mac_str)) == 12) {
@@ -678,20 +696,27 @@
 
 static int speedtch_bind(struct usbatm_data *usbatm,
 			 struct usb_interface *intf,
-			 const struct usb_device_id *id,
-			 int *need_heavy_init)
+			 const struct usb_device_id *id)
 {
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
-	struct usb_interface *cur_intf;
+	struct usb_interface *cur_intf, *data_intf;
 	struct speedtch_instance_data *instance;
 	int ifnum = intf->altsetting->desc.bInterfaceNumber;
 	int num_interfaces = usb_dev->actconfig->desc.bNumInterfaces;
 	int i, ret;
+	int use_isoc;
 
 	usb_dbg(usbatm, "%s entered\n", __func__);
 
+	/* sanity checks */
+
 	if (usb_dev->descriptor.bDeviceClass != USB_CLASS_VENDOR_SPEC) {
-		usb_dbg(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
+		usb_err(usbatm, "%s: wrong device class %d\n", __func__, usb_dev->descriptor.bDeviceClass);
+		return -ENODEV;
+	}
+
+	if (!(data_intf = usb_ifnum_to_if(usb_dev, INTERFACE_DATA))) {
+		usb_err(usbatm, "%s: data interface not found!\n", __func__);
 		return -ENODEV;
 	}
 
@@ -704,25 +729,71 @@
 			ret = usb_driver_claim_interface(&speedtch_usb_driver, cur_intf, usbatm);
 
 			if (ret < 0) {
-				usb_dbg(usbatm, "%s: failed to claim interface %d (%d)\n", __func__, i, ret);
+				usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, i, ret);
 				speedtch_release_interfaces(usb_dev, i);
 				return ret;
 			}
 		}
 	}
 
-	instance = kmalloc(sizeof(*instance), GFP_KERNEL);
+	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
 
 	if (!instance) {
-		usb_dbg(usbatm, "%s: no memory for instance data!\n", __func__);
+		usb_err(usbatm, "%s: no memory for instance data!\n", __func__);
 		ret = -ENOMEM;
 		goto fail_release;
 	}
 
-	memset(instance, 0, sizeof(struct speedtch_instance_data));
-
 	instance->usbatm = usbatm;
 
+	/* altsetting and enable_isoc may change at any moment, so take a snapshot */
+	instance->altsetting = altsetting;
+	use_isoc = enable_isoc;
+
+	if (instance->altsetting)
+		if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, instance->altsetting)) < 0) {
+			usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, instance->altsetting, ret);
+			instance->altsetting = 0; /* fall back to default */
+		}
+
+	if (!instance->altsetting && use_isoc)
+		if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_ISOC_ALTSETTING)) < 0) {
+			usb_dbg(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_ISOC_ALTSETTING, ret);
+			use_isoc = 0; /* fall back to bulk */
+		}
+
+	if (use_isoc) {
+		const struct usb_host_interface *desc = data_intf->cur_altsetting;
+		const __u8 target_address = USB_DIR_IN | usbatm->driver->isoc_in;
+		int i;
+
+		use_isoc = 0; /* fall back to bulk if endpoint not found */
+
+		for (i=0; i<desc->desc.bNumEndpoints; i++) {
+			const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
+
+			if ((endpoint_desc->bEndpointAddress == target_address)) {
+				use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+					USB_ENDPOINT_XFER_ISOC;
+				break;
+			}
+		}
+
+		if (!use_isoc)
+			usb_info(usbatm, "isochronous transfer not supported - using bulk\n");
+	}
+
+	if (!use_isoc && !instance->altsetting)
+		if ((ret = usb_set_interface(usb_dev, INTERFACE_DATA, DEFAULT_BULK_ALTSETTING)) < 0) {
+			usb_err(usbatm, "%s: setting interface to %2d failed (%d)!\n", __func__, DEFAULT_BULK_ALTSETTING, ret);
+			goto fail_free;
+		}
+
+	if (!instance->altsetting)
+		instance->altsetting = use_isoc ? DEFAULT_ISOC_ALTSETTING : DEFAULT_BULK_ALTSETTING;
+
+	usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
+
 	INIT_WORK(&instance->status_checker, (void *)speedtch_check_status, instance);
 
 	instance->status_checker.timer.function = speedtch_status_poll;
@@ -749,13 +820,15 @@
 			      0x12, 0xc0, 0x07, 0x00,
 			      instance->scratch_buffer + OFFSET_7, SIZE_7, 500);
 
-	*need_heavy_init = (ret != SIZE_7);
+	usbatm->flags |= (ret == SIZE_7 ? UDSL_SKIP_HEAVY_INIT : 0);
 
-	usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, need_heavy_init ? "not" : "already");
+	usb_dbg(usbatm, "%s: firmware %s loaded\n", __func__, usbatm->flags & UDSL_SKIP_HEAVY_INIT ? "already" : "not");
 
-	if (*need_heavy_init)
-		if ((ret = usb_reset_device(usb_dev)) < 0)
+	if (!(usbatm->flags & UDSL_SKIP_HEAVY_INIT))
+		if ((ret = usb_reset_device(usb_dev)) < 0) {
+			usb_err(usbatm, "%s: device reset failed (%d)!\n", __func__, ret);
 			goto fail_free;
+		}
 
         usbatm->driver_data = instance;
 
@@ -787,15 +860,15 @@
 ***********/
 
 static struct usbatm_driver speedtch_usbatm_driver = {
-	.owner		= THIS_MODULE,
 	.driver_name	= speedtch_driver_name,
 	.bind		= speedtch_bind,
 	.heavy_init	= speedtch_heavy_init,
 	.unbind		= speedtch_unbind,
 	.atm_start	= speedtch_atm_start,
 	.atm_stop	= speedtch_atm_stop,
-	.in		= ENDPOINT_DATA,
-	.out		= ENDPOINT_DATA
+	.bulk_in	= ENDPOINT_BULK_DATA,
+	.bulk_out	= ENDPOINT_BULK_DATA,
+	.isoc_in	= ENDPOINT_ISOC_DATA
 };
 
 static int speedtch_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 7d2a679..830d2c9 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -63,11 +63,12 @@
 #include <linux/ctype.h>
 #include <linux/kthread.h>
 #include <linux/version.h>
+#include <linux/mutex.h>
 #include <asm/unaligned.h>
 
 #include "usbatm.h"
 
-#define EAGLEUSBVERSION "ueagle 1.1"
+#define EAGLEUSBVERSION "ueagle 1.2"
 
 
 /*
@@ -358,16 +359,19 @@
 #define INTR_PKT_SIZE 28
 
 static struct usb_driver uea_driver;
-static DECLARE_MUTEX(uea_semaphore);
+static DEFINE_MUTEX(uea_mutex);
 static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III"};
 
 static int modem_index;
 static unsigned int debug;
+static int use_iso[NB_MODEM] = {[0 ... (NB_MODEM - 1)] = 1};
 static int sync_wait[NB_MODEM];
 static char *cmv_file[NB_MODEM];
 
 module_param(debug, uint, 0644);
 MODULE_PARM_DESC(debug, "module debug level (0=off,1=on,2=verbose)");
+module_param_array(use_iso, bool, NULL, 0644);
+MODULE_PARM_DESC(use_iso, "use isochronous usb pipe for incoming traffic");
 module_param_array(sync_wait, bool, NULL, 0644);
 MODULE_PARM_DESC(sync_wait, "wait the synchronisation before starting ATM");
 module_param_array(cmv_file, charp, NULL, 0644);
@@ -628,8 +632,7 @@
 			dsp_name = FW_DIR "DSPep.bin";
 	}
 
-	ret = request_firmware(&sc->dsp_firm,
-				dsp_name, &sc->usb_dev->dev);
+	ret = request_firmware(&sc->dsp_firm, dsp_name, &sc->usb_dev->dev);
 	if (ret < 0) {
 		uea_err(INS_TO_USBDEV(sc),
 		       "requesting firmware %s failed with error %d\n",
@@ -744,7 +747,6 @@
 		return ret;
 
 	return (ret == 0) ? -ETIMEDOUT : 0;
-
 }
 
 #define UCDC_SEND_ENCAPSULATED_COMMAND 0x00
@@ -935,6 +937,7 @@
 	 * ADI930 don't support it (-EPIPE error).
 	 */
 	if (UEA_CHIP_VERSION(sc) != ADI930
+		    && !use_iso[sc->modem_index]
 		    && sc->stats.phy.dsrate != (data >> 16) * 32) {
 		/* Original timming from ADI(used in windows driver)
 		 * 0x20ffff>>16 * 32 = 32 * 32 = 1Mbits
@@ -1010,7 +1013,7 @@
 	int ret, size;
 	u8 *data;
 	char *file;
-	static char cmv_name[256] = FW_DIR;
+	char cmv_name[FIRMWARE_NAME_MAX]; /* 30 bytes stack variable */
 
 	if (cmv_file[sc->modem_index] == NULL) {
 		if (UEA_CHIP_VERSION(sc) == ADI930)
@@ -1184,8 +1187,7 @@
 		}
 	}
 
-	/* finish to send the fpga
-	 */
+	/* finish to send the fpga */
 	ret = uea_request(sc, 0xe, 1, 0, NULL);
 	if (ret < 0) {
 		uea_err(INS_TO_USBDEV(sc),
@@ -1193,9 +1195,7 @@
 		goto err1;
 	}
 
-	/*
-	 * Tell the modem we finish : de-assert reset
-	 */
+	/* Tell the modem we finish : de-assert reset */
 	value = 0;
 	ret = uea_send_modem_cmd(sc->usb_dev, 0xe, 1, &value);
 	if (ret < 0)
@@ -1209,6 +1209,7 @@
 	return ret;
 }
 
+/* The modem send us an ack. First with check if it right */
 static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
 {
 	uea_enters(INS_TO_USBDEV(sc));
@@ -1268,23 +1269,19 @@
  */
 static void uea_intr(struct urb *urb, struct pt_regs *regs)
 {
-	struct uea_softc *sc = (struct uea_softc *)urb->context;
-	struct intr_pkt *intr;
+	struct uea_softc *sc = urb->context;
+	struct intr_pkt *intr = urb->transfer_buffer;
 	uea_enters(INS_TO_USBDEV(sc));
 
-	if (urb->status < 0) {
+	if (unlikely(urb->status < 0)) {
 		uea_err(INS_TO_USBDEV(sc), "uea_intr() failed with %d\n",
 		       urb->status);
 		return;
 	}
 
-	intr = (struct intr_pkt *) urb->transfer_buffer;
-
 	/* device-to-host interrupt */
 	if (intr->bType != 0x08 || sc->booting) {
-		uea_err(INS_TO_USBDEV(sc), "wrong intr\n");
-		// rebooting ?
-		// sc->reset = 1;
+		uea_err(INS_TO_USBDEV(sc), "wrong interrupt\n");
 		goto resubmit;
 	}
 
@@ -1300,7 +1297,7 @@
 		break;
 
 	default:
-		uea_err(INS_TO_USBDEV(sc), "unknown intr %u\n",
+		uea_err(INS_TO_USBDEV(sc), "unknown interrupt %u\n",
 		       le16_to_cpu(intr->wInterrupt));
 	}
 
@@ -1379,7 +1376,7 @@
 	int ret;
 	uea_enters(INS_TO_USBDEV(sc));
 	ret = kthread_stop(sc->kthread);
-	uea_info(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
+	uea_dbg(INS_TO_USBDEV(sc), "kthread finish with status %d\n", ret);
 
 	/* stop any pending boot process */
 	flush_scheduled_work();
@@ -1418,13 +1415,13 @@
 	int ret = -ENODEV;
 	struct uea_softc *sc;
 
-	down(&uea_semaphore);
+	mutex_lock(&uea_mutex);
 	sc = dev_to_uea(dev);
 	if (!sc)
 		goto out;
 	ret = snprintf(buf, 10, "%08x\n", sc->stats.phy.state);
 out:
-	up(&uea_semaphore);
+	mutex_unlock(&uea_mutex);
 	return ret;
 }
 
@@ -1434,14 +1431,14 @@
 	int ret = -ENODEV;
 	struct uea_softc *sc;
 
-	down(&uea_semaphore);
+	mutex_lock(&uea_mutex);
 	sc = dev_to_uea(dev);
 	if (!sc)
 		goto out;
 	sc->reset = 1;
 	ret = count;
 out:
-	up(&uea_semaphore);
+	mutex_unlock(&uea_mutex);
 	return ret;
 }
 
@@ -1453,7 +1450,7 @@
 	int ret = -ENODEV;
 	struct uea_softc *sc;
 
-	down(&uea_semaphore);
+	mutex_lock(&uea_mutex);
 	sc = dev_to_uea(dev);
 	if (!sc)
 		goto out;
@@ -1473,7 +1470,7 @@
 		break;
 	}
 out:
-	up(&uea_semaphore);
+	mutex_unlock(&uea_mutex);
 	return ret;
 }
 
@@ -1485,7 +1482,7 @@
 	int ret = -ENODEV;
 	struct uea_softc *sc;
 
-	down(&uea_semaphore);
+	mutex_lock(&uea_mutex);
 	sc = dev_to_uea(dev);
 	if (!sc)
 		goto out;
@@ -1497,7 +1494,7 @@
 	else
 		ret = sprintf(buf, "GOOD\n");
 out:
-	up(&uea_semaphore);
+	mutex_unlock(&uea_mutex);
 	return ret;
 }
 
@@ -1511,7 +1508,7 @@
 	int ret = -ENODEV; 					\
 	struct uea_softc *sc; 					\
  								\
-	down(&uea_semaphore); 					\
+	mutex_lock(&uea_mutex); 					\
 	sc = dev_to_uea(dev);					\
 	if (!sc) 						\
 		goto out; 					\
@@ -1519,7 +1516,7 @@
 	if (reset)						\
 		sc->stats.phy.name = 0;				\
 out: 								\
-	up(&uea_semaphore); 					\
+	mutex_unlock(&uea_mutex); 					\
 	return ret; 						\
 } 								\
 								\
@@ -1617,7 +1614,7 @@
 }
 
 static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
-		   const struct usb_device_id *id, int *heavy)
+		   const struct usb_device_id *id)
 {
 	struct usb_device *usb = interface_to_usbdev(intf);
 	struct uea_softc *sc;
@@ -1629,16 +1626,14 @@
 	if (ifnum != UEA_INTR_IFACE_NO)
 		return -ENODEV;
 
-	*heavy = sync_wait[modem_index];
+	usbatm->flags = (sync_wait[modem_index] ? 0 : UDSL_SKIP_HEAVY_INIT);
 
 	/* interface 1 is for outbound traffic */
 	ret = claim_interface(usb, usbatm, UEA_US_IFACE_NO);
 	if (ret < 0)
 		return ret;
 
-	/* ADI930 has only 2 interfaces and inbound traffic
-	 * is on interface 1
-	 */
+	/* ADI930 has only 2 interfaces and inbound traffic is on interface 1 */
 	if (UEA_CHIP_VERSION(id) != ADI930) {
 		/* interface 2 is for inbound traffic */
 		ret = claim_interface(usb, usbatm, UEA_DS_IFACE_NO);
@@ -1658,6 +1653,25 @@
 	sc->modem_index = (modem_index < NB_MODEM) ? modem_index++ : 0;
 	sc->driver_info = id->driver_info;
 
+	/* ADI930 don't support iso */
+	if (UEA_CHIP_VERSION(id) != ADI930 && use_iso[sc->modem_index]) {
+		int i;
+
+		/* try set fastest alternate for inbound traffic interface */
+		for (i = FASTEST_ISO_INTF; i > 0; i--)
+			if (usb_set_interface(usb, UEA_DS_IFACE_NO, i) == 0)
+				break;
+
+		if (i > 0) {
+			uea_dbg(usb, "set alternate %d for 2 interface\n", i);
+			uea_info(usb, "using iso mode\n");
+			usbatm->flags |= UDSL_USE_ISOC | UDSL_IGNORE_EILSEQ;
+		} else {
+			uea_err(usb, "setting any alternate failed for "
+					"2 interface, using bulk mode\n");
+		}
+	}
+
 	ret = uea_boot(sc);
 	if (ret < 0) {
 		kfree(sc);
@@ -1701,13 +1715,13 @@
 
 static struct usbatm_driver uea_usbatm_driver = {
 	.driver_name = "ueagle-atm",
-	.owner = THIS_MODULE,
 	.bind = uea_bind,
 	.atm_start = uea_atm_open,
 	.unbind = uea_unbind,
 	.heavy_init = uea_heavy,
-	.in = UEA_BULK_DATA_PIPE,
-	.out = UEA_BULK_DATA_PIPE,
+	.bulk_in = UEA_BULK_DATA_PIPE,
+	.bulk_out = UEA_BULK_DATA_PIPE,
+	.isoc_in = UEA_ISO_DATA_PIPE,
 };
 
 static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
@@ -1738,9 +1752,9 @@
 	 * Pre-firmware device has one interface
 	 */
 	if (usb->config->desc.bNumInterfaces != 1 && ifnum == 0) {
-		down(&uea_semaphore);
+		mutex_lock(&uea_mutex);
 		usbatm_usb_disconnect(intf);
-		up(&uea_semaphore);
+		mutex_unlock(&uea_mutex);
 		uea_info(usb, "ADSL device removed\n");
 	}
 
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 7af1883..c1211fc 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -72,6 +72,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
+#include <linux/netdevice.h>
 #include <linux/proc_fs.h>
 #include <linux/sched.h>
 #include <linux/signal.h>
@@ -91,19 +92,18 @@
 #endif
 
 #define DRIVER_AUTHOR	"Johan Verrept, Duncan Sands <duncan.sands@free.fr>"
-#define DRIVER_VERSION	"1.9"
+#define DRIVER_VERSION	"1.10"
 #define DRIVER_DESC	"Generic USB ATM/DSL I/O, version " DRIVER_VERSION
 
 static const char usbatm_driver_name[] = "usbatm";
 
 #define UDSL_MAX_RCV_URBS		16
 #define UDSL_MAX_SND_URBS		16
-#define UDSL_MAX_RCV_BUF_SIZE		1024	/* ATM cells */
-#define UDSL_MAX_SND_BUF_SIZE		1024	/* ATM cells */
+#define UDSL_MAX_BUF_SIZE		64 * 1024	/* bytes */
 #define UDSL_DEFAULT_RCV_URBS		4
 #define UDSL_DEFAULT_SND_URBS		4
-#define UDSL_DEFAULT_RCV_BUF_SIZE	64	/* ATM cells */
-#define UDSL_DEFAULT_SND_BUF_SIZE	64	/* ATM cells */
+#define UDSL_DEFAULT_RCV_BUF_SIZE	64 * ATM_CELL_SIZE	/* bytes */
+#define UDSL_DEFAULT_SND_BUF_SIZE	64 * ATM_CELL_SIZE	/* bytes */
 
 #define ATM_CELL_HEADER			(ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
 
@@ -111,8 +111,8 @@
 
 static unsigned int num_rcv_urbs = UDSL_DEFAULT_RCV_URBS;
 static unsigned int num_snd_urbs = UDSL_DEFAULT_SND_URBS;
-static unsigned int rcv_buf_size = UDSL_DEFAULT_RCV_BUF_SIZE;
-static unsigned int snd_buf_size = UDSL_DEFAULT_SND_BUF_SIZE;
+static unsigned int rcv_buf_bytes = UDSL_DEFAULT_RCV_BUF_SIZE;
+static unsigned int snd_buf_bytes = UDSL_DEFAULT_SND_BUF_SIZE;
 
 module_param(num_rcv_urbs, uint, S_IRUGO);
 MODULE_PARM_DESC(num_rcv_urbs,
@@ -126,15 +126,15 @@
 		 __MODULE_STRING(UDSL_MAX_SND_URBS) ", default: "
 		 __MODULE_STRING(UDSL_DEFAULT_SND_URBS) ")");
 
-module_param(rcv_buf_size, uint, S_IRUGO);
-MODULE_PARM_DESC(rcv_buf_size,
-		 "Size of the buffers used for reception in ATM cells (range: 1-"
-		 __MODULE_STRING(UDSL_MAX_RCV_BUF_SIZE) ", default: "
+module_param(rcv_buf_bytes, uint, S_IRUGO);
+MODULE_PARM_DESC(rcv_buf_bytes,
+		 "Size of the buffers used for reception, in bytes (range: 1-"
+		 __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
 		 __MODULE_STRING(UDSL_DEFAULT_RCV_BUF_SIZE) ")");
 
-module_param(snd_buf_size, uint, S_IRUGO);
-MODULE_PARM_DESC(snd_buf_size,
-		 "Size of the buffers used for transmission in ATM cells (range: 1-"
+module_param(snd_buf_bytes, uint, S_IRUGO);
+MODULE_PARM_DESC(snd_buf_bytes,
+		 "Size of the buffers used for transmission, in bytes (range: 1-"
 		 __MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
 		 __MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
 
@@ -166,10 +166,10 @@
 
 /* ATM */
 
-static void usbatm_atm_dev_close(struct atm_dev *dev);
+static void usbatm_atm_dev_close(struct atm_dev *atm_dev);
 static int usbatm_atm_open(struct atm_vcc *vcc);
 static void usbatm_atm_close(struct atm_vcc *vcc);
-static int usbatm_atm_ioctl(struct atm_dev *dev, unsigned int cmd, void __user * arg);
+static int usbatm_atm_ioctl(struct atm_dev *atm_dev, unsigned int cmd, void __user * arg);
 static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb);
 static int usbatm_atm_proc_read(struct atm_dev *atm_dev, loff_t * pos, char *page);
 
@@ -199,7 +199,7 @@
 	if (vcc->pop)
 		vcc->pop(vcc, skb);
 	else
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 }
 
 
@@ -234,8 +234,9 @@
 
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
 	if (ret) {
-		atm_dbg(channel->usbatm, "%s: urb 0x%p submission failed (%d)!\n",
-			__func__, urb, ret);
+		if (printk_ratelimit())
+			atm_warn(channel->usbatm, "%s: urb 0x%p submission failed (%d)!\n",
+				__func__, urb, ret);
 
 		/* consider all errors transient and return the buffer back to the queue */
 		urb->status = -EAGAIN;
@@ -269,10 +270,16 @@
 
 	spin_unlock_irqrestore(&channel->lock, flags);
 
-	if (unlikely(urb->status))
+	if (unlikely(urb->status) &&
+			(!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) ||
+			 urb->status != -EILSEQ ))
+	{
+		if (printk_ratelimit())
+			atm_warn(channel->usbatm, "%s: urb 0x%p failed (%d)!\n",
+				__func__, urb, urb->status);
 		/* throttle processing in case of an error */
 		mod_timer(&channel->delay, jiffies + msecs_to_jiffies(THROTTLE_MSECS));
-	else
+	} else
 		tasklet_schedule(&channel->tasklet);
 }
 
@@ -284,128 +291,166 @@
 static inline struct usbatm_vcc_data *usbatm_find_vcc(struct usbatm_data *instance,
 						  short vpi, int vci)
 {
-	struct usbatm_vcc_data *vcc;
+	struct usbatm_vcc_data *vcc_data;
 
-	list_for_each_entry(vcc, &instance->vcc_list, list)
-		if ((vcc->vci == vci) && (vcc->vpi == vpi))
-			return vcc;
+	list_for_each_entry(vcc_data, &instance->vcc_list, list)
+		if ((vcc_data->vci == vci) && (vcc_data->vpi == vpi))
+			return vcc_data;
 	return NULL;
 }
 
-static void usbatm_extract_cells(struct usbatm_data *instance,
-			       unsigned char *source, unsigned int avail_data)
+static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char *source)
 {
-	struct usbatm_vcc_data *cached_vcc = NULL;
 	struct atm_vcc *vcc;
 	struct sk_buff *sarb;
-	unsigned int stride = instance->rx_channel.stride;
-	int vci, cached_vci = 0;
-	short vpi, cached_vpi = 0;
-	u8 pti;
+	short vpi = ((source[0] & 0x0f) << 4)  | (source[1] >> 4);
+	int vci = ((source[1] & 0x0f) << 12) | (source[2] << 4) | (source[3] >> 4);
+	u8 pti = ((source[3] & 0xe) >> 1);
 
-	for (; avail_data >= stride; avail_data -= stride, source += stride) {
-		vpi = ((source[0] & 0x0f) << 4)  | (source[1] >> 4);
-		vci = ((source[1] & 0x0f) << 12) | (source[2] << 4) | (source[3] >> 4);
-		pti = ((source[3] & 0xe) >> 1);
+	vdbg("%s: vpi %hd, vci %d, pti %d", __func__, vpi, vci, pti);
 
-		vdbg("%s: vpi %hd, vci %d, pti %d", __func__, vpi, vci, pti);
+	if ((vci != instance->cached_vci) || (vpi != instance->cached_vpi)) {
+		instance->cached_vpi = vpi;
+		instance->cached_vci = vci;
 
-		if ((vci != cached_vci) || (vpi != cached_vpi)) {
-			cached_vpi = vpi;
-			cached_vci = vci;
+		instance->cached_vcc = usbatm_find_vcc(instance, vpi, vci);
 
-			cached_vcc = usbatm_find_vcc(instance, vpi, vci);
+		if (!instance->cached_vcc)
+			atm_rldbg(instance, "%s: unknown vpi/vci (%hd/%d)!\n", __func__, vpi, vci);
+	}
 
-			if (!cached_vcc)
-				atm_dbg(instance, "%s: unknown vpi/vci (%hd/%d)!\n", __func__, vpi, vci);
-		}
+	if (!instance->cached_vcc)
+		return;
 
-		if (!cached_vcc)
-			continue;
+	vcc = instance->cached_vcc->vcc;
 
-		vcc = cached_vcc->vcc;
+	/* OAM F5 end-to-end */
+	if (pti == ATM_PTI_E2EF5) {
+		if (printk_ratelimit())
+			atm_warn(instance, "%s: OAM not supported (vpi %d, vci %d)!\n",
+				__func__, vpi, vci);
+		atomic_inc(&vcc->stats->rx_err);
+		return;
+	}
 
-		/* OAM F5 end-to-end */
-		if (pti == ATM_PTI_E2EF5) {
-			atm_warn(instance, "%s: OAM not supported (vpi %d, vci %d)!\n", __func__, vpi, vci);
+	sarb = instance->cached_vcc->sarb;
+
+	if (sarb->tail + ATM_CELL_PAYLOAD > sarb->end) {
+		atm_rldbg(instance, "%s: buffer overrun (sarb->len %u, vcc: 0x%p)!\n",
+				__func__, sarb->len, vcc);
+		/* discard cells already received */
+		skb_trim(sarb, 0);
+		UDSL_ASSERT(sarb->tail + ATM_CELL_PAYLOAD <= sarb->end);
+	}
+
+	memcpy(sarb->tail, source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
+	__skb_put(sarb, ATM_CELL_PAYLOAD);
+
+	if (pti & 1) {
+		struct sk_buff *skb;
+		unsigned int length;
+		unsigned int pdu_length;
+
+		length = (source[ATM_CELL_SIZE - 6] << 8) + source[ATM_CELL_SIZE - 5];
+
+		/* guard against overflow */
+		if (length > ATM_MAX_AAL5_PDU) {
+			atm_rldbg(instance, "%s: bogus length %u (vcc: 0x%p)!\n",
+				  __func__, length, vcc);
 			atomic_inc(&vcc->stats->rx_err);
-			continue;
+			goto out;
 		}
 
-		sarb = cached_vcc->sarb;
+		pdu_length = usbatm_pdu_length(length);
 
-		if (sarb->tail + ATM_CELL_PAYLOAD > sarb->end) {
-			atm_dbg(instance, "%s: buffer overrun (sarb->len %u, vcc: 0x%p)!\n",
-					__func__, sarb->len, vcc);
-			/* discard cells already received */
-			skb_trim(sarb, 0);
-			UDSL_ASSERT(sarb->tail + ATM_CELL_PAYLOAD <= sarb->end);
+		if (sarb->len < pdu_length) {
+			atm_rldbg(instance, "%s: bogus pdu_length %u (sarb->len: %u, vcc: 0x%p)!\n",
+				  __func__, pdu_length, sarb->len, vcc);
+			atomic_inc(&vcc->stats->rx_err);
+			goto out;
 		}
 
-		memcpy(sarb->tail, source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
-		__skb_put(sarb, ATM_CELL_PAYLOAD);
-
-		if (pti & 1) {
-			struct sk_buff *skb;
-			unsigned int length;
-			unsigned int pdu_length;
-
-			length = (source[ATM_CELL_SIZE - 6] << 8) + source[ATM_CELL_SIZE - 5];
-
-			/* guard against overflow */
-			if (length > ATM_MAX_AAL5_PDU) {
-				atm_dbg(instance, "%s: bogus length %u (vcc: 0x%p)!\n",
-						__func__, length, vcc);
-				atomic_inc(&vcc->stats->rx_err);
-				goto out;
-			}
-
-			pdu_length = usbatm_pdu_length(length);
-
-			if (sarb->len < pdu_length) {
-				atm_dbg(instance, "%s: bogus pdu_length %u (sarb->len: %u, vcc: 0x%p)!\n",
-						__func__, pdu_length, sarb->len, vcc);
-				atomic_inc(&vcc->stats->rx_err);
-				goto out;
-			}
-
-			if (crc32_be(~0, sarb->tail - pdu_length, pdu_length) != 0xc704dd7b) {
-				atm_dbg(instance, "%s: packet failed crc check (vcc: 0x%p)!\n",
-						__func__, vcc);
-				atomic_inc(&vcc->stats->rx_err);
-				goto out;
-			}
-
-			vdbg("%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", __func__, length, pdu_length, vcc);
-
-			if (!(skb = dev_alloc_skb(length))) {
-				atm_dbg(instance, "%s: no memory for skb (length: %u)!\n", __func__, length);
-				atomic_inc(&vcc->stats->rx_drop);
-				goto out;
-			}
-
-			vdbg("%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", __func__, skb, skb->truesize);
-
-			if (!atm_charge(vcc, skb->truesize)) {
-				atm_dbg(instance, "%s: failed atm_charge (skb->truesize: %u)!\n", __func__, skb->truesize);
-				dev_kfree_skb(skb);
-				goto out;	/* atm_charge increments rx_drop */
-			}
-
-			memcpy(skb->data, sarb->tail - pdu_length, length);
-			__skb_put(skb, length);
-
-			vdbg("%s: sending skb 0x%p, skb->len %u, skb->truesize %u",
-			     __func__, skb, skb->len, skb->truesize);
-
-			PACKETDEBUG(skb->data, skb->len);
-
-			vcc->push(vcc, skb);
-
-			atomic_inc(&vcc->stats->rx);
-		out:
-			skb_trim(sarb, 0);
+		if (crc32_be(~0, sarb->tail - pdu_length, pdu_length) != 0xc704dd7b) {
+			atm_rldbg(instance, "%s: packet failed crc check (vcc: 0x%p)!\n",
+				  __func__, vcc);
+			atomic_inc(&vcc->stats->rx_err);
+			goto out;
 		}
+
+		vdbg("%s: got packet (length: %u, pdu_length: %u, vcc: 0x%p)", __func__, length, pdu_length, vcc);
+
+		if (!(skb = dev_alloc_skb(length))) {
+			if (printk_ratelimit())
+				atm_err(instance, "%s: no memory for skb (length: %u)!\n",
+					__func__, length);
+			atomic_inc(&vcc->stats->rx_drop);
+			goto out;
+		}
+
+		vdbg("%s: allocated new sk_buff (skb: 0x%p, skb->truesize: %u)", __func__, skb, skb->truesize);
+
+		if (!atm_charge(vcc, skb->truesize)) {
+			atm_rldbg(instance, "%s: failed atm_charge (skb->truesize: %u)!\n",
+				  __func__, skb->truesize);
+			dev_kfree_skb_any(skb);
+			goto out;	/* atm_charge increments rx_drop */
+		}
+
+		memcpy(skb->data, sarb->tail - pdu_length, length);
+		__skb_put(skb, length);
+
+		vdbg("%s: sending skb 0x%p, skb->len %u, skb->truesize %u",
+		     __func__, skb, skb->len, skb->truesize);
+
+		PACKETDEBUG(skb->data, skb->len);
+
+		vcc->push(vcc, skb);
+
+		atomic_inc(&vcc->stats->rx);
+	out:
+		skb_trim(sarb, 0);
+	}
+}
+
+static void usbatm_extract_cells(struct usbatm_data *instance,
+		unsigned char *source, unsigned int avail_data)
+{
+	unsigned int stride = instance->rx_channel.stride;
+	unsigned int buf_usage = instance->buf_usage;
+
+	/* extract cells from incoming data, taking into account that
+	 * the length of avail data may not be a multiple of stride */
+
+	if (buf_usage > 0) {
+		/* we have a partially received atm cell */
+		unsigned char *cell_buf = instance->cell_buf;
+		unsigned int space_left = stride - buf_usage;
+
+		UDSL_ASSERT(buf_usage <= stride);
+
+		if (avail_data >= space_left) {
+			/* add new data and process cell */
+			memcpy(cell_buf + buf_usage, source, space_left);
+			source += space_left;
+			avail_data -= space_left;
+			usbatm_extract_one_cell(instance, cell_buf);
+			instance->buf_usage = 0;
+		} else {
+			/* not enough data to fill the cell */
+			memcpy(cell_buf + buf_usage, source, avail_data);
+			instance->buf_usage = buf_usage + avail_data;
+			return;
+		}
+	}
+
+	for (; avail_data >= stride; avail_data -= stride, source += stride)
+		usbatm_extract_one_cell(instance, source);
+
+	if (avail_data > 0) {
+		/* length was not a multiple of stride -
+		 * save remaining data for next call */
+		memcpy(instance->cell_buf, source, avail_data);
+		instance->buf_usage = avail_data;
 	}
 }
 
@@ -420,14 +465,14 @@
 {
 	struct usbatm_control *ctrl = UDSL_SKB(skb);
 	struct atm_vcc *vcc = ctrl->atm.vcc;
-	unsigned int num_written;
+	unsigned int bytes_written;
 	unsigned int stride = instance->tx_channel.stride;
 
 	vdbg("%s: skb->len=%d, avail_space=%u", __func__, skb->len, avail_space);
 	UDSL_ASSERT(!(avail_space % stride));
 
-	for (num_written = 0; num_written < avail_space && ctrl->len;
-	     num_written += stride, target += stride) {
+	for (bytes_written = 0; bytes_written < avail_space && ctrl->len;
+	     bytes_written += stride, target += stride) {
 		unsigned int data_len = min_t(unsigned int, skb->len, ATM_CELL_PAYLOAD);
 		unsigned int left = ATM_CELL_PAYLOAD - data_len;
 		u8 *ptr = target;
@@ -470,7 +515,7 @@
 			ctrl->crc = crc32_be(ctrl->crc, ptr, left);
 	}
 
-	return num_written;
+	return bytes_written;
 }
 
 
@@ -487,16 +532,40 @@
 		vdbg("%s: processing urb 0x%p", __func__, urb);
 
 		if (usb_pipeisoc(urb->pipe)) {
+			unsigned char *merge_start = NULL;
+			unsigned int merge_length = 0;
+			const unsigned int packet_size = instance->rx_channel.packet_size;
 			int i;
-			for (i = 0; i < urb->number_of_packets; i++)
-				if (!urb->iso_frame_desc[i].status)
-					usbatm_extract_cells(instance,
-							     (u8 *)urb->transfer_buffer + urb->iso_frame_desc[i].offset,
-							     urb->iso_frame_desc[i].actual_length);
-		}
-		else
+
+			for (i = 0; i < urb->number_of_packets; i++) {
+				if (!urb->iso_frame_desc[i].status) {
+					unsigned int actual_length = urb->iso_frame_desc[i].actual_length;
+
+					UDSL_ASSERT(actual_length <= packet_size);
+
+					if (!merge_length)
+						merge_start = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+					merge_length += actual_length;
+					if (merge_length && (actual_length < packet_size)) {
+						usbatm_extract_cells(instance, merge_start, merge_length);
+						merge_length = 0;
+					}
+				} else {
+					atm_rldbg(instance, "%s: status %d in frame %d!\n", __func__, urb->status, i);
+					if (merge_length)
+						usbatm_extract_cells(instance, merge_start, merge_length);
+					merge_length = 0;
+					instance->buf_usage = 0;
+				}
+			}
+
+			if (merge_length)
+				usbatm_extract_cells(instance, merge_start, merge_length);
+		} else
 			if (!urb->status)
 				usbatm_extract_cells(instance, urb->transfer_buffer, urb->actual_length);
+			else
+				instance->buf_usage = 0;
 
 		if (usbatm_submit_urb(urb))
 			return;
@@ -514,7 +583,7 @@
 	struct sk_buff *skb = instance->current_skb;
 	struct urb *urb = NULL;
 	const unsigned int buf_size = instance->tx_channel.buf_size;
-	unsigned int num_written = 0;
+	unsigned int bytes_written = 0;
 	u8 *buffer = NULL;
 
 	if (!skb)
@@ -526,16 +595,16 @@
 			if (!urb)
 				break;		/* no more senders */
 			buffer = urb->transfer_buffer;
-			num_written = (urb->status == -EAGAIN) ?
+			bytes_written = (urb->status == -EAGAIN) ?
 				urb->transfer_buffer_length : 0;
 		}
 
-		num_written += usbatm_write_cells(instance, skb,
-						  buffer + num_written,
-						  buf_size - num_written);
+		bytes_written += usbatm_write_cells(instance, skb,
+						  buffer + bytes_written,
+						  buf_size - bytes_written);
 
 		vdbg("%s: wrote %u bytes from skb 0x%p to urb 0x%p",
-		     __func__, num_written, skb, urb);
+		     __func__, bytes_written, skb, urb);
 
 		if (!UDSL_SKB(skb)->len) {
 			struct atm_vcc *vcc = UDSL_SKB(skb)->atm.vcc;
@@ -546,8 +615,8 @@
 			skb = skb_dequeue(&instance->sndqueue);
 		}
 
-		if (num_written == buf_size || (!skb && num_written)) {
-			urb->transfer_buffer_length = num_written;
+		if (bytes_written == buf_size || (!skb && bytes_written)) {
+			urb->transfer_buffer_length = bytes_written;
 
 			if (usbatm_submit_urb(urb))
 				break;
@@ -593,20 +662,24 @@
 
 	vdbg("%s called (skb 0x%p, len %u)", __func__, skb, skb->len);
 
-	if (!instance) {
-		dbg("%s: NULL data!", __func__);
+	/* racy disconnection check - fine */
+	if (!instance || instance->disconnected) {
+#ifdef DEBUG
+		if (printk_ratelimit())
+			printk(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
+#endif
 		err = -ENODEV;
 		goto fail;
 	}
 
 	if (vcc->qos.aal != ATM_AAL5) {
-		atm_dbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
+		atm_rldbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
 		err = -EINVAL;
 		goto fail;
 	}
 
 	if (skb->len > ATM_MAX_AAL5_PDU) {
-		atm_dbg(instance, "%s: packet too long (%d vs %d)!\n",
+		atm_rldbg(instance, "%s: packet too long (%d vs %d)!\n",
 				__func__, skb->len, ATM_MAX_AAL5_PDU);
 		err = -EINVAL;
 		goto fail;
@@ -665,16 +738,16 @@
 **  ATM  **
 **********/
 
-static void usbatm_atm_dev_close(struct atm_dev *dev)
+static void usbatm_atm_dev_close(struct atm_dev *atm_dev)
 {
-	struct usbatm_data *instance = dev->dev_data;
+	struct usbatm_data *instance = atm_dev->dev_data;
 
 	dbg("%s", __func__);
 
 	if (!instance)
 		return;
 
-	dev->dev_data = NULL;
+	atm_dev->dev_data = NULL; /* catch bugs */
 	usbatm_put_instance(instance);	/* taken in usbatm_atm_init */
 }
 
@@ -706,15 +779,19 @@
 			       atomic_read(&atm_dev->stats.aal5.rx_err),
 			       atomic_read(&atm_dev->stats.aal5.rx_drop));
 
-	if (!left--)
-		switch (atm_dev->signal) {
-		case ATM_PHY_SIG_FOUND:
-			return sprintf(page, "Line up\n");
-		case ATM_PHY_SIG_LOST:
-			return sprintf(page, "Line down\n");
-		default:
-			return sprintf(page, "Line state unknown\n");
-		}
+	if (!left--) {
+		if (instance->disconnected)
+			return sprintf(page, "Disconnected\n");
+		else
+			switch (atm_dev->signal) {
+			case ATM_PHY_SIG_FOUND:
+				return sprintf(page, "Line up\n");
+			case ATM_PHY_SIG_LOST:
+				return sprintf(page, "Line down\n");
+			default:
+				return sprintf(page, "Line state unknown\n");
+			}
+	}
 
 	return 0;
 }
@@ -735,13 +812,24 @@
 	atm_dbg(instance, "%s: vpi %hd, vci %d\n", __func__, vpi, vci);
 
 	/* only support AAL5 */
-	if ((vcc->qos.aal != ATM_AAL5) || (vcc->qos.rxtp.max_sdu < 0)
-	    || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU)) {
-		atm_dbg(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
+	if ((vcc->qos.aal != ATM_AAL5)) {
+		atm_warn(instance, "%s: unsupported ATM type %d!\n", __func__, vcc->qos.aal);
 		return -EINVAL;
 	}
 
-	down(&instance->serialize);	/* vs self, usbatm_atm_close */
+	/* sanity checks */
+	if ((vcc->qos.rxtp.max_sdu < 0) || (vcc->qos.rxtp.max_sdu > ATM_MAX_AAL5_PDU)) {
+		atm_dbg(instance, "%s: max_sdu %d out of range!\n", __func__, vcc->qos.rxtp.max_sdu);
+		return -EINVAL;
+	}
+
+	mutex_lock(&instance->serialize);	/* vs self, usbatm_atm_close, usbatm_usb_disconnect */
+
+	if (instance->disconnected) {
+		atm_dbg(instance, "%s: disconnected!\n", __func__);
+		ret = -ENODEV;
+		goto fail;
+	}
 
 	if (usbatm_find_vcc(instance, vpi, vci)) {
 		atm_dbg(instance, "%s: %hd/%d already in use!\n", __func__, vpi, vci);
@@ -749,20 +837,19 @@
 		goto fail;
 	}
 
-	if (!(new = kmalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL))) {
-		atm_dbg(instance, "%s: no memory for vcc_data!\n", __func__);
+	if (!(new = kzalloc(sizeof(struct usbatm_vcc_data), GFP_KERNEL))) {
+		atm_err(instance, "%s: no memory for vcc_data!\n", __func__);
 		ret = -ENOMEM;
 		goto fail;
 	}
 
-	memset(new, 0, sizeof(struct usbatm_vcc_data));
 	new->vcc = vcc;
 	new->vpi = vpi;
 	new->vci = vci;
 
 	new->sarb = alloc_skb(usbatm_pdu_length(vcc->qos.rxtp.max_sdu), GFP_KERNEL);
 	if (!new->sarb) {
-		atm_dbg(instance, "%s: no memory for SAR buffer!\n", __func__);
+		atm_err(instance, "%s: no memory for SAR buffer!\n", __func__);
 		ret = -ENOMEM;
 		goto fail;
 	}
@@ -770,6 +857,9 @@
 	vcc->dev_data = new;
 
 	tasklet_disable(&instance->rx_channel.tasklet);
+	instance->cached_vcc = new;
+	instance->cached_vpi = vpi;
+	instance->cached_vci = vci;
 	list_add(&new->list, &instance->vcc_list);
 	tasklet_enable(&instance->rx_channel.tasklet);
 
@@ -777,7 +867,7 @@
 	set_bit(ATM_VF_PARTIAL, &vcc->flags);
 	set_bit(ATM_VF_READY, &vcc->flags);
 
-	up(&instance->serialize);
+	mutex_unlock(&instance->serialize);
 
 	atm_dbg(instance, "%s: allocated vcc data 0x%p\n", __func__, new);
 
@@ -785,7 +875,7 @@
 
 fail:
 	kfree(new);
-	up(&instance->serialize);
+	mutex_unlock(&instance->serialize);
 	return ret;
 }
 
@@ -806,9 +896,14 @@
 
 	usbatm_cancel_send(instance, vcc);
 
-	down(&instance->serialize);	/* vs self, usbatm_atm_open */
+	mutex_lock(&instance->serialize);	/* vs self, usbatm_atm_open, usbatm_usb_disconnect */
 
 	tasklet_disable(&instance->rx_channel.tasklet);
+	if (instance->cached_vcc == vcc_data) {
+		instance->cached_vcc = NULL;
+		instance->cached_vpi = ATM_VPI_UNSPEC;
+		instance->cached_vci = ATM_VCI_UNSPEC;
+	}
 	list_del(&vcc_data->list);
 	tasklet_enable(&instance->rx_channel.tasklet);
 
@@ -824,14 +919,21 @@
 	clear_bit(ATM_VF_PARTIAL, &vcc->flags);
 	clear_bit(ATM_VF_ADDR, &vcc->flags);
 
-	up(&instance->serialize);
+	mutex_unlock(&instance->serialize);
 
 	atm_dbg(instance, "%s successful\n", __func__);
 }
 
-static int usbatm_atm_ioctl(struct atm_dev *dev, unsigned int cmd,
+static int usbatm_atm_ioctl(struct atm_dev *atm_dev, unsigned int cmd,
 			  void __user * arg)
 {
+	struct usbatm_data *instance = atm_dev->dev_data;
+
+	if (!instance || instance->disconnected) {
+		dbg("%s: %s!", __func__, instance ? "disconnected" : "NULL instance");
+		return -ENODEV;
+	}
+
 	switch (cmd) {
 	case ATM_QUERYLOOP:
 		return put_user(ATM_LM_NONE, (int __user *)arg) ? -EFAULT : 0;
@@ -845,10 +947,13 @@
 	struct atm_dev *atm_dev;
 	int ret, i;
 
-	/* ATM init */
+	/* ATM init.  The ATM initialization scheme suffers from an intrinsic race
+	 * condition: callbacks we register can be executed at once, before we have
+	 * initialized the struct atm_dev.  To protect against this, all callbacks
+	 * abort if atm_dev->dev_data is NULL. */
 	atm_dev = atm_dev_register(instance->driver_name, &usbatm_atm_devops, -1, NULL);
 	if (!atm_dev) {
-		usb_dbg(instance, "%s: failed to register ATM device!\n", __func__);
+		usb_err(instance, "%s: failed to register ATM device!\n", __func__);
 		return -1;
 	}
 
@@ -862,12 +967,13 @@
 	atm_dev->link_rate = 128 * 1000 / 424;
 
 	if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
-		atm_dbg(instance, "%s: atm_start failed: %d!\n", __func__, ret);
+		atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
 		goto fail;
 	}
 
-	/* ready for ATM callbacks */
 	usbatm_get_instance(instance);	/* dropped in usbatm_atm_dev_close */
+
+	/* ready for ATM callbacks */
 	mb();
 	atm_dev->dev_data = instance;
 
@@ -903,9 +1009,9 @@
 	if (!ret)
 		ret = usbatm_atm_init(instance);
 
-	down(&instance->serialize);
+	mutex_lock(&instance->serialize);
 	instance->thread_pid = -1;
-	up(&instance->serialize);
+	mutex_unlock(&instance->serialize);
 
 	complete_and_exit(&instance->thread_exited, ret);
 }
@@ -915,13 +1021,13 @@
 	int ret = kernel_thread(usbatm_do_heavy_init, instance, CLONE_KERNEL);
 
 	if (ret < 0) {
-		usb_dbg(instance, "%s: failed to create kernel_thread (%d)!\n", __func__, ret);
+		usb_err(instance, "%s: failed to create kernel_thread (%d)!\n", __func__, ret);
 		return ret;
 	}
 
-	down(&instance->serialize);
+	mutex_lock(&instance->serialize);
 	instance->thread_pid = ret;
-	up(&instance->serialize);
+	mutex_unlock(&instance->serialize);
 
 	wait_for_completion(&instance->thread_started);
 
@@ -951,9 +1057,9 @@
 	char *buf;
 	int error = -ENOMEM;
 	int i, length;
-	int need_heavy;
+	unsigned int maxpacket, num_packets;
 
-	dev_dbg(dev, "%s: trying driver %s with vendor=0x%x, product=0x%x, ifnum %d\n",
+	dev_dbg(dev, "%s: trying driver %s with vendor=%04x, product=%04x, ifnum %2d\n",
 			__func__, driver->driver_name,
 			le16_to_cpu(usb_dev->descriptor.idVendor),
 			le16_to_cpu(usb_dev->descriptor.idProduct),
@@ -962,7 +1068,7 @@
 	/* instance init */
 	instance = kzalloc(sizeof(*instance) + sizeof(struct urb *) * (num_rcv_urbs + num_snd_urbs), GFP_KERNEL);
 	if (!instance) {
-		dev_dbg(dev, "%s: no memory for instance data!\n", __func__);
+		dev_err(dev, "%s: no memory for instance data!\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -996,66 +1102,96 @@
 	snprintf(buf, length, ")");
 
  bind:
-	need_heavy = 1;
-	if (driver->bind && (error = driver->bind(instance, intf, id, &need_heavy)) < 0) {
-			dev_dbg(dev, "%s: bind failed: %d!\n", __func__, error);
+	if (driver->bind && (error = driver->bind(instance, intf, id)) < 0) {
+			dev_err(dev, "%s: bind failed: %d!\n", __func__, error);
 			goto fail_free;
 	}
 
 	/* private fields */
 
 	kref_init(&instance->refcount);		/* dropped in usbatm_usb_disconnect */
-	init_MUTEX(&instance->serialize);
+	mutex_init(&instance->serialize);
 
 	instance->thread_pid = -1;
 	init_completion(&instance->thread_started);
 	init_completion(&instance->thread_exited);
 
 	INIT_LIST_HEAD(&instance->vcc_list);
+	skb_queue_head_init(&instance->sndqueue);
 
 	usbatm_init_channel(&instance->rx_channel);
 	usbatm_init_channel(&instance->tx_channel);
 	tasklet_init(&instance->rx_channel.tasklet, usbatm_rx_process, (unsigned long)instance);
 	tasklet_init(&instance->tx_channel.tasklet, usbatm_tx_process, (unsigned long)instance);
-	instance->rx_channel.endpoint = usb_rcvbulkpipe(usb_dev, driver->in);
-	instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->out);
 	instance->rx_channel.stride = ATM_CELL_SIZE + driver->rx_padding;
 	instance->tx_channel.stride = ATM_CELL_SIZE + driver->tx_padding;
-	instance->rx_channel.buf_size = rcv_buf_size * instance->rx_channel.stride;
-	instance->tx_channel.buf_size = snd_buf_size * instance->tx_channel.stride;
 	instance->rx_channel.usbatm = instance->tx_channel.usbatm = instance;
 
-	skb_queue_head_init(&instance->sndqueue);
+	if ((instance->flags & UDSL_USE_ISOC) && driver->isoc_in)
+		instance->rx_channel.endpoint = usb_rcvisocpipe(usb_dev, driver->isoc_in);
+	else
+		instance->rx_channel.endpoint = usb_rcvbulkpipe(usb_dev, driver->bulk_in);
+
+	instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->bulk_out);
+
+	/* tx buffer size must be a positive multiple of the stride */
+	instance->tx_channel.buf_size = max (instance->tx_channel.stride,
+			snd_buf_bytes - (snd_buf_bytes % instance->tx_channel.stride));
+
+	/* rx buffer size must be a positive multiple of the endpoint maxpacket */
+	maxpacket = usb_maxpacket(usb_dev, instance->rx_channel.endpoint, 0);
+
+	if ((maxpacket < 1) || (maxpacket > UDSL_MAX_BUF_SIZE)) {
+		dev_err(dev, "%s: invalid endpoint %02x!\n", __func__,
+				usb_pipeendpoint(instance->rx_channel.endpoint));
+		error = -EINVAL;
+		goto fail_unbind;
+	}
+
+	num_packets = max (1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */
+
+	if (num_packets * maxpacket > UDSL_MAX_BUF_SIZE)
+		num_packets--;
+
+	instance->rx_channel.buf_size = num_packets * maxpacket;
+	instance->rx_channel.packet_size = maxpacket;
+
+#ifdef DEBUG
+	for (i = 0; i < 2; i++) {
+		struct usbatm_channel *channel = i ?
+			&instance->tx_channel : &instance->rx_channel;
+
+		dev_dbg(dev, "%s: using %d byte buffer for %s channel 0x%p\n", __func__, channel->buf_size, i ? "tx" : "rx", channel);
+	}
+#endif
+
+	/* initialize urbs */
 
 	for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
-		struct urb *urb;
 		u8 *buffer;
-		unsigned int iso_packets = 0, iso_size = 0;
 		struct usbatm_channel *channel = i < num_rcv_urbs ?
 			&instance->rx_channel : &instance->tx_channel;
+		struct urb *urb;
+		unsigned int iso_packets = usb_pipeisoc(channel->endpoint) ? channel->buf_size / channel->packet_size : 0;
 
-		if (usb_pipeisoc(channel->endpoint)) {
-			/* don't expect iso out endpoints */
-			iso_size = usb_maxpacket(instance->usb_dev, channel->endpoint, 0);
-			iso_size -= iso_size % channel->stride;	/* alignment */
-			BUG_ON(!iso_size);
-			iso_packets = (channel->buf_size - 1) / iso_size + 1;
-		}
+		UDSL_ASSERT(!usb_pipeisoc(channel->endpoint) || usb_pipein(channel->endpoint));
 
 		urb = usb_alloc_urb(iso_packets, GFP_KERNEL);
 		if (!urb) {
-			dev_dbg(dev, "%s: no memory for urb %d!\n", __func__, i);
+			dev_err(dev, "%s: no memory for urb %d!\n", __func__, i);
+			error = -ENOMEM;
 			goto fail_unbind;
 		}
 
 		instance->urbs[i] = urb;
 
-		buffer = kmalloc(channel->buf_size, GFP_KERNEL);
+		/* zero the tx padding to avoid leaking information */
+		buffer = kzalloc(channel->buf_size, GFP_KERNEL);
 		if (!buffer) {
-			dev_dbg(dev, "%s: no memory for buffer %d!\n", __func__, i);
+			dev_err(dev, "%s: no memory for buffer %d!\n", __func__, i);
+			error = -ENOMEM;
 			goto fail_unbind;
 		}
-		memset(buffer, 0, channel->buf_size);
 
 		usb_fill_bulk_urb(urb, instance->usb_dev, channel->endpoint,
 				  buffer, channel->buf_size, usbatm_complete, channel);
@@ -1065,9 +1201,8 @@
 			urb->transfer_flags = URB_ISO_ASAP;
 			urb->number_of_packets = iso_packets;
 			for (j = 0; j < iso_packets; j++) {
-				urb->iso_frame_desc[j].offset = iso_size * j;
-				urb->iso_frame_desc[j].length = min_t(int, iso_size,
-								      channel->buf_size - urb->iso_frame_desc[j].offset);
+				urb->iso_frame_desc[j].offset = channel->packet_size * j;
+				urb->iso_frame_desc[j].length = channel->packet_size;
 			}
 		}
 
@@ -1079,7 +1214,17 @@
 		     __func__, urb->transfer_buffer, urb->transfer_buffer_length, urb);
 	}
 
-	if (need_heavy && driver->heavy_init) {
+	instance->cached_vpi = ATM_VPI_UNSPEC;
+	instance->cached_vci = ATM_VCI_UNSPEC;
+	instance->cell_buf = kmalloc(instance->rx_channel.stride, GFP_KERNEL);
+
+	if (!instance->cell_buf) {
+		dev_err(dev, "%s: no memory for cell buffer!\n", __func__);
+		error = -ENOMEM;
+		goto fail_unbind;
+	}
+
+	if (!(instance->flags & UDSL_SKIP_HEAVY_INIT) && driver->heavy_init) {
 		error = usbatm_heavy_init(instance);
 	} else {
 		complete(&instance->thread_exited);	/* pretend that heavy_init was run */
@@ -1098,6 +1243,8 @@
 	if (instance->driver->unbind)
 		instance->driver->unbind(instance, intf);
  fail_free:
+	kfree(instance->cell_buf);
+
 	for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
 		if (instance->urbs[i])
 			kfree(instance->urbs[i]->transfer_buffer);
@@ -1114,6 +1261,7 @@
 {
 	struct device *dev = &intf->dev;
 	struct usbatm_data *instance = usb_get_intfdata(intf);
+	struct usbatm_vcc_data *vcc_data;
 	int i;
 
 	dev_dbg(dev, "%s entered\n", __func__);
@@ -1125,13 +1273,19 @@
 
 	usb_set_intfdata(intf, NULL);
 
-	down(&instance->serialize);
+	mutex_lock(&instance->serialize);
+	instance->disconnected = 1;
 	if (instance->thread_pid >= 0)
 		kill_proc(instance->thread_pid, SIGTERM, 1);
-	up(&instance->serialize);
+	mutex_unlock(&instance->serialize);
 
 	wait_for_completion(&instance->thread_exited);
 
+	mutex_lock(&instance->serialize);
+	list_for_each_entry(vcc_data, &instance->vcc_list, list)
+		vcc_release_async(vcc_data->vcc, -EPIPE);
+	mutex_unlock(&instance->serialize);
+
 	tasklet_disable(&instance->rx_channel.tasklet);
 	tasklet_disable(&instance->tx_channel.tasklet);
 
@@ -1141,6 +1295,14 @@
 	del_timer_sync(&instance->rx_channel.delay);
 	del_timer_sync(&instance->tx_channel.delay);
 
+	/* turn usbatm_[rt]x_process into something close to a no-op */
+	/* no need to take the spinlock */
+	INIT_LIST_HEAD(&instance->rx_channel.list);
+	INIT_LIST_HEAD(&instance->tx_channel.list);
+
+	tasklet_enable(&instance->rx_channel.tasklet);
+	tasklet_enable(&instance->tx_channel.tasklet);
+
 	if (instance->atm_dev && instance->driver->atm_stop)
 		instance->driver->atm_stop(instance, instance->atm_dev);
 
@@ -1149,19 +1311,13 @@
 
 	instance->driver_data = NULL;
 
-	/* turn usbatm_[rt]x_process into noop */
-	/* no need to take the spinlock */
-	INIT_LIST_HEAD(&instance->rx_channel.list);
-	INIT_LIST_HEAD(&instance->tx_channel.list);
-
-	tasklet_enable(&instance->rx_channel.tasklet);
-	tasklet_enable(&instance->tx_channel.tasklet);
-
 	for (i = 0; i < num_rcv_urbs + num_snd_urbs; i++) {
 		kfree(instance->urbs[i]->transfer_buffer);
 		usb_free_urb(instance->urbs[i]);
 	}
 
+	kfree(instance->cell_buf);
+
 	/* ATM finalize */
 	if (instance->atm_dev)
 		atm_dev_deregister(instance->atm_dev);
@@ -1186,10 +1342,10 @@
 
 	if ((num_rcv_urbs > UDSL_MAX_RCV_URBS)
 	    || (num_snd_urbs > UDSL_MAX_SND_URBS)
-	    || (rcv_buf_size < 1)
-	    || (rcv_buf_size > UDSL_MAX_RCV_BUF_SIZE)
-	    || (snd_buf_size < 1)
-	    || (snd_buf_size > UDSL_MAX_SND_BUF_SIZE))
+	    || (rcv_buf_bytes < 1)
+	    || (rcv_buf_bytes > UDSL_MAX_BUF_SIZE)
+	    || (snd_buf_bytes < 1)
+	    || (snd_buf_bytes > UDSL_MAX_BUF_SIZE))
 		return -EINVAL;
 
 	return 0;
diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h
index 1adacd6..ff8551e 100644
--- a/drivers/usb/atm/usbatm.h
+++ b/drivers/usb/atm/usbatm.h
@@ -24,21 +24,21 @@
 #ifndef	_USBATM_H_
 #define	_USBATM_H_
 
-#include <linux/config.h>
-
-/*
-#define VERBOSE_DEBUG
-*/
-
 #include <asm/semaphore.h>
 #include <linux/atm.h>
 #include <linux/atmdev.h>
 #include <linux/completion.h>
 #include <linux/device.h>
+#include <linux/kernel.h>
 #include <linux/kref.h>
 #include <linux/list.h>
 #include <linux/stringify.h>
 #include <linux/usb.h>
+#include <linux/mutex.h>
+
+/*
+#define VERBOSE_DEBUG
+*/
 
 #ifdef DEBUG
 #define UDSL_ASSERT(x)	BUG_ON(!(x))
@@ -52,8 +52,13 @@
 	dev_info(&(instance)->usb_intf->dev , format , ## arg)
 #define usb_warn(instance, format, arg...)	\
 	dev_warn(&(instance)->usb_intf->dev , format , ## arg)
+#ifdef DEBUG
 #define usb_dbg(instance, format, arg...)	\
-	dev_dbg(&(instance)->usb_intf->dev , format , ## arg)
+        dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg)
+#else
+#define usb_dbg(instance, format, arg...)	\
+	do {} while (0)
+#endif
 
 /* FIXME: move to dev_* once ATM is driver model aware */
 #define atm_printk(level, instance, format, arg...)	\
@@ -69,12 +74,24 @@
 #ifdef DEBUG
 #define atm_dbg(instance, format, arg...)	\
 	atm_printk(KERN_DEBUG, instance , format , ## arg)
+#define atm_rldbg(instance, format, arg...)	\
+	if (printk_ratelimit())				\
+		atm_printk(KERN_DEBUG, instance , format , ## arg)
 #else
 #define atm_dbg(instance, format, arg...)	\
 	do {} while (0)
+#define atm_rldbg(instance, format, arg...)	\
+	do {} while (0)
 #endif
 
 
+/* flags, set by mini-driver in bind() */
+
+#define UDSL_SKIP_HEAVY_INIT	(1<<0)
+#define UDSL_USE_ISOC		(1<<1)
+#define UDSL_IGNORE_EILSEQ	(1<<2)
+
+
 /* mini driver */
 
 struct usbatm_data;
@@ -86,16 +103,11 @@
 */
 
 struct usbatm_driver {
-	struct module *owner;
-
 	const char *driver_name;
 
-	/*
-	*  init device ... can sleep, or cause probe() failure.  Drivers with a heavy_init
-	*  method can avoid having it called by setting need_heavy_init to zero.
-	*/
+	/* init device ... can sleep, or cause probe() failure */
         int (*bind) (struct usbatm_data *, struct usb_interface *,
-		     const struct usb_device_id *id, int *need_heavy_init);
+		     const struct usb_device_id *id);
 
 	/* additional device initialization that is too slow to be done in probe() */
         int (*heavy_init) (struct usbatm_data *, struct usb_interface *);
@@ -109,8 +121,9 @@
 	/* cleanup ATM device ... can sleep, but can't fail */
 	void (*atm_stop) (struct usbatm_data *, struct atm_dev *);
 
-        int in;		/* rx endpoint */
-        int out;	/* tx endpoint */
+        int bulk_in;	/* bulk rx endpoint */
+        int isoc_in;	/* isochronous rx endpoint */
+        int bulk_out;	/* bulk tx endpoint */
 
 	unsigned rx_padding;
 	unsigned tx_padding;
@@ -125,6 +138,7 @@
 	int endpoint;			/* usb pipe */
 	unsigned int stride;		/* ATM cell size + padding */
 	unsigned int buf_size;		/* urb buffer size */
+	unsigned int packet_size;	/* endpoint maxpacket */
 	spinlock_t lock;
 	struct list_head list;
 	struct tasklet_struct tasklet;
@@ -143,6 +157,7 @@
 	struct usbatm_driver *driver;
 	void *driver_data;
 	char driver_name[16];
+	unsigned int flags; /* set by mini-driver in bind() */
 
 	/* USB device */
 	struct usb_device *usb_dev;
@@ -157,7 +172,8 @@
         ********************************/
 
 	struct kref refcount;
-	struct semaphore serialize;
+	struct mutex serialize;
+	int disconnected;
 
 	/* heavy init */
 	int thread_pid;
@@ -171,7 +187,14 @@
 	struct usbatm_channel tx_channel;
 
 	struct sk_buff_head sndqueue;
-	struct sk_buff *current_skb;			/* being emptied */
+	struct sk_buff *current_skb;	/* being emptied */
+
+	struct usbatm_vcc_data *cached_vcc;
+	int cached_vci;
+	short cached_vpi;
+
+	unsigned char *cell_buf;	/* holds partial rx cell */
+	unsigned int buf_usage;
 
 	struct urb *urbs[0];
 };
diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c
index 5c76e3a..42d6823 100644
--- a/drivers/usb/atm/xusbatm.c
+++ b/drivers/usb/atm/xusbatm.c
@@ -41,6 +41,8 @@
 XUSBATM_PARM(tx_endpoint, unsigned char, byte, "tx endpoint number");
 XUSBATM_PARM(rx_padding, unsigned char, byte, "rx padding (default 0)");
 XUSBATM_PARM(tx_padding, unsigned char, byte, "tx padding (default 0)");
+XUSBATM_PARM(rx_altsetting, unsigned char, byte, "rx altsetting (default 0)");
+XUSBATM_PARM(tx_altsetting, unsigned char, byte, "rx altsetting (default 0)");
 
 static const char xusbatm_driver_name[] = "xusbatm";
 
@@ -48,82 +50,118 @@
 static struct usb_device_id xusbatm_usb_ids[XUSBATM_DRIVERS_MAX + 1];
 static struct usb_driver xusbatm_usb_driver;
 
-static int usb_intf_has_ep(const struct usb_interface *intf, u8 ep)
+static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int altsetting, u8 ep)
 {
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
 	int i, j;
 
-	for (i = 0; i < intf->num_altsetting; i++) {
-		struct usb_host_interface *alt = intf->altsetting;
-		for (j = 0; j < alt->desc.bNumEndpoints; j++)
-			if ((alt->endpoint[i].desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) == ep)
-				return 1;
+	for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++)
+		if ((intf = usb_dev->actconfig->interface[i]) && (alt = usb_altnum_to_altsetting(intf, altsetting)))
+			for (j = 0; j < alt->desc.bNumEndpoints; j++)
+				if (alt->endpoint[j].desc.bEndpointAddress == ep)
+					return intf;
+	return NULL;
+}
+
+static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device *usb_dev,
+		struct usb_interface *intf, int altsetting, int claim)
+{
+	int ifnum = intf->altsetting->desc.bInterfaceNumber;
+	int ret;
+
+	if (claim && (ret = usb_driver_claim_interface(&xusbatm_usb_driver, intf, usbatm))) {
+		usb_err(usbatm, "%s: failed to claim interface %2d (%d)!\n", __func__, ifnum, ret);
+		return ret;
+	}
+	if ((ret = usb_set_interface(usb_dev, ifnum, altsetting))) {
+		usb_err(usbatm, "%s: altsetting %2d for interface %2d failed (%d)!\n", __func__, altsetting, ifnum, ret);
+		return ret;
 	}
 	return 0;
 }
 
-static int xusbatm_bind(struct usbatm_data *usbatm_instance,
-			struct usb_interface *intf, const struct usb_device_id *id,
-			int *need_heavy_init)
+static void xusbatm_release_intf (struct usb_device *usb_dev, struct usb_interface *intf, int claimed)
+{
+	if (claimed) {
+		usb_set_intfdata(intf, NULL);
+		usb_driver_release_interface(&xusbatm_usb_driver, intf);
+	}
+}
+
+static int xusbatm_bind(struct usbatm_data *usbatm,
+			struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	int drv_ix = id - xusbatm_usb_ids;
-	int rx_ep_present = usb_intf_has_ep(intf, rx_endpoint[drv_ix]);
-	int tx_ep_present = usb_intf_has_ep(intf, tx_endpoint[drv_ix]);
-	u8 searched_ep = rx_ep_present ? tx_endpoint[drv_ix] : rx_endpoint[drv_ix];
-	int i, ret;
+	int rx_alt = rx_altsetting[drv_ix];
+	int tx_alt = tx_altsetting[drv_ix];
+	struct usb_interface *rx_intf = xusbatm_find_intf(usb_dev, rx_alt, rx_endpoint[drv_ix]);
+	struct usb_interface *tx_intf = xusbatm_find_intf(usb_dev, tx_alt, tx_endpoint[drv_ix]);
+	int ret;
 
-	usb_dbg(usbatm_instance, "%s: binding driver %d: vendor %#x product %#x"
-		" rx: ep %#x padd %d tx: ep %#x padd %d\n",
+	usb_dbg(usbatm, "%s: binding driver %d: vendor %04x product %04x"
+		" rx: ep %02x padd %d alt %2d tx: ep %02x padd %d alt %2d\n",
 		__func__, drv_ix, vendor[drv_ix], product[drv_ix],
-		rx_endpoint[drv_ix], rx_padding[drv_ix],
-		tx_endpoint[drv_ix], tx_padding[drv_ix]);
+		rx_endpoint[drv_ix], rx_padding[drv_ix], rx_alt,
+		tx_endpoint[drv_ix], tx_padding[drv_ix], tx_alt);
 
-	if (!rx_ep_present && !tx_ep_present) {
-		usb_dbg(usbatm_instance, "%s: intf #%d has neither rx (%#x) nor tx (%#x) endpoint\n",
-			__func__, intf->altsetting->desc.bInterfaceNumber,
-			rx_endpoint[drv_ix], tx_endpoint[drv_ix]);
+	if (!rx_intf || !tx_intf) {
+		if (!rx_intf)
+			usb_dbg(usbatm, "%s: no interface contains endpoint %02x in altsetting %2d\n",
+				__func__, rx_endpoint[drv_ix], rx_alt);
+		if (!tx_intf)
+			usb_dbg(usbatm, "%s: no interface contains endpoint %02x in altsetting %2d\n",
+				__func__, tx_endpoint[drv_ix], tx_alt);
 		return -ENODEV;
 	}
 
-	if (rx_ep_present && tx_ep_present)
-		return 0;
+	if ((rx_intf != intf) && (tx_intf != intf))
+		return -ENODEV;
 
-	for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
-		struct usb_interface *cur_if = usb_dev->actconfig->interface[i];
-
-		if (cur_if != intf && usb_intf_has_ep(cur_if, searched_ep)) {
-			ret = usb_driver_claim_interface(&xusbatm_usb_driver,
-							 cur_if, usbatm_instance);
-			if (!ret)
-				usb_err(usbatm_instance, "%s: failed to claim interface #%d (%d)\n",
-					__func__, cur_if->altsetting->desc.bInterfaceNumber, ret);
-			return ret;
-		}
+	if ((rx_intf == tx_intf) && (rx_alt != tx_alt)) {
+		usb_err(usbatm, "%s: altsettings clash on interface %2d (%2d vs %2d)!\n", __func__,
+				rx_intf->altsetting->desc.bInterfaceNumber, rx_alt, tx_alt);
+		return -EINVAL;
 	}
 
-	usb_err(usbatm_instance, "%s: no interface has endpoint %#x\n",
-		__func__, searched_ep);
-	return -ENODEV;
+	usb_dbg(usbatm, "%s: rx If#=%2d; tx If#=%2d\n", __func__,
+			rx_intf->altsetting->desc.bInterfaceNumber,
+			tx_intf->altsetting->desc.bInterfaceNumber);
+
+	if ((ret = xusbatm_capture_intf(usbatm, usb_dev, rx_intf, rx_alt, rx_intf != intf)))
+		return ret;
+
+	if ((tx_intf != rx_intf) && (ret = xusbatm_capture_intf(usbatm, usb_dev, tx_intf, tx_alt, tx_intf != intf))) {
+		xusbatm_release_intf(usb_dev, rx_intf, rx_intf != intf);
+		return ret;
+	}
+
+	return 0;
 }
 
-static void xusbatm_unbind(struct usbatm_data *usbatm_instance,
+static void xusbatm_unbind(struct usbatm_data *usbatm,
 			   struct usb_interface *intf)
 {
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	int i;
-	usb_dbg(usbatm_instance, "%s entered\n", __func__);
+
+	usb_dbg(usbatm, "%s entered\n", __func__);
 
 	for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) {
-		struct usb_interface *cur_if = usb_dev->actconfig->interface[i];
-		usb_set_intfdata(cur_if, NULL);
-		usb_driver_release_interface(&xusbatm_usb_driver, cur_if);
+		struct usb_interface *cur_intf = usb_dev->actconfig->interface[i];
+
+		if (cur_intf && (usb_get_intfdata(cur_intf) == usbatm)) {
+			usb_set_intfdata(cur_intf, NULL);
+			usb_driver_release_interface(&xusbatm_usb_driver, cur_intf);
+		}
 	}
 }
 
-static int xusbatm_atm_start(struct usbatm_data *usbatm_instance,
+static int xusbatm_atm_start(struct usbatm_data *usbatm,
 			     struct atm_dev *atm_dev)
 {
-	atm_dbg(usbatm_instance, "%s entered\n", __func__);
+	atm_dbg(usbatm, "%s entered\n", __func__);
 
 	/* use random MAC as we've no way to get it from the device */
 	random_ether_addr(atm_dev->esi);
@@ -161,18 +199,19 @@
 	}
 
 	for (i = 0; i < num_vendor; i++) {
+		rx_endpoint[i] |= USB_DIR_IN;
+		tx_endpoint[i] &= USB_ENDPOINT_NUMBER_MASK;
+
 		xusbatm_usb_ids[i].match_flags	= USB_DEVICE_ID_MATCH_DEVICE;
 		xusbatm_usb_ids[i].idVendor	= vendor[i];
 		xusbatm_usb_ids[i].idProduct	= product[i];
 
-
-		xusbatm_drivers[i].owner	= THIS_MODULE;
 		xusbatm_drivers[i].driver_name	= xusbatm_driver_name;
 		xusbatm_drivers[i].bind		= xusbatm_bind;
 		xusbatm_drivers[i].unbind	= xusbatm_unbind;
 		xusbatm_drivers[i].atm_start	= xusbatm_atm_start;
-		xusbatm_drivers[i].in		= rx_endpoint[i];
-		xusbatm_drivers[i].out		= tx_endpoint[i];
+		xusbatm_drivers[i].bulk_in	= rx_endpoint[i];
+		xusbatm_drivers[i].bulk_out	= tx_endpoint[i];
 		xusbatm_drivers[i].rx_padding	= rx_padding[i];
 		xusbatm_drivers[i].tx_padding	= tx_padding[i];
 	}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index b9fd39f..97bdeb1 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1014,8 +1014,13 @@
 	}
 
 	down(&open_sem);
+	if (!usb_get_intfdata(intf)) {
+		up(&open_sem);
+		return;
+	}
 	acm->dev = NULL;
-	usb_set_intfdata (intf, NULL);
+	usb_set_intfdata(acm->control, NULL);
+	usb_set_intfdata(acm->data, NULL);
 
 	tasklet_disable(&acm->urb_task);
 
@@ -1036,7 +1041,7 @@
 	for (i = 0; i < ACM_NRB; i++)
 		usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma);
 
-	usb_driver_release_interface(&acm_driver, acm->data);
+	usb_driver_release_interface(&acm_driver, intf == acm->control ? acm->data : intf);
 
 	if (!acm->used) {
 		acm_tty_unregister(acm);
diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c
index dba4cc0..d34848a 100644
--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -7,6 +7,7 @@
  * Copyright (c) 2000 Vojtech Pavlik	<vojtech@suse.cz>
  # Copyright (c) 2001 Pete Zaitcev	<zaitcev@redhat.com>
  # Copyright (c) 2001 David Paschal	<paschal@rcsis.com>
+ * Copyright (c) 2006 Oliver Neukum	<oliver@neukum.name>
  *
  * USB Printer Device Class driver for USB printers and printer cables
  *
@@ -273,13 +274,16 @@
 {
 	struct usblp *usblp = urb->context;
 
-	if (!usblp || !usblp->dev || !usblp->used || !usblp->present)
+	if (unlikely(!usblp || !usblp->dev || !usblp->used))
 		return;
 
+	if (unlikely(!usblp->present))
+		goto unplug;
 	if (unlikely(urb->status))
 		warn("usblp%d: nonzero read/write bulk status received: %d",
 			usblp->minor, urb->status);
 	usblp->rcomplete = 1;
+unplug:
 	wake_up_interruptible(&usblp->wait);
 }
 
@@ -287,13 +291,15 @@
 {
 	struct usblp *usblp = urb->context;
 
-	if (!usblp || !usblp->dev || !usblp->used || !usblp->present)
+	if (unlikely(!usblp || !usblp->dev || !usblp->used))
 		return;
-
+	if (unlikely(!usblp->present))
+		goto unplug;
 	if (unlikely(urb->status))
 		warn("usblp%d: nonzero read/write bulk status received: %d",
 			usblp->minor, urb->status);
 	usblp->wcomplete = 1;
+unplug:
 	wake_up_interruptible(&usblp->wait);
 }
 
@@ -627,9 +633,8 @@
 
 static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
 {
-	DECLARE_WAITQUEUE(wait, current);
 	struct usblp *usblp = file->private_data;
-	int timeout, err = 0, transfer_length = 0;
+	int timeout, rv, err = 0, transfer_length = 0;
 	size_t writecount = 0;
 
 	while (writecount < count) {
@@ -641,24 +646,11 @@
 			}
 
 			timeout = USBLP_WRITE_TIMEOUT;
-			add_wait_queue(&usblp->wait, &wait);
-			while ( 1==1 ) {
 
-				if (signal_pending(current)) {
-					remove_wait_queue(&usblp->wait, &wait);
-					return writecount ? writecount : -EINTR;
-				}
-				set_current_state(TASK_INTERRUPTIBLE);
-				if (timeout && !usblp->wcomplete) {
-					timeout = schedule_timeout(timeout);
-				} else {
-					set_current_state(TASK_RUNNING);
-					break;
-				}
-			}
-			remove_wait_queue(&usblp->wait, &wait);
+			rv = wait_event_interruptible_timeout(usblp->wait, usblp->wcomplete || !usblp->present , timeout);
+			if (rv < 0)
+				return writecount ? writecount : -EINTR;
 		}
-
 		down (&usblp->sem);
 		if (!usblp->present) {
 			up (&usblp->sem);
@@ -724,7 +716,7 @@
 static ssize_t usblp_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
 {
 	struct usblp *usblp = file->private_data;
-	DECLARE_WAITQUEUE(wait, current);
+	int rv;
 
 	if (!usblp->bidir)
 		return -EINVAL;
@@ -742,26 +734,13 @@
 			count = -EAGAIN;
 			goto done;
 		}
-
-		add_wait_queue(&usblp->wait, &wait);
-		while (1==1) {
-			if (signal_pending(current)) {
-				count = -EINTR;
-				remove_wait_queue(&usblp->wait, &wait);
-				goto done;
-			}
-			up (&usblp->sem);
-			set_current_state(TASK_INTERRUPTIBLE);
-			if (!usblp->rcomplete) {
-				schedule();
-			} else {
-				set_current_state(TASK_RUNNING);
-				down(&usblp->sem);
-				break;
-			}
-			down (&usblp->sem);
+		up(&usblp->sem);
+		rv = wait_event_interruptible(usblp->wait, usblp->rcomplete || !usblp->present);
+		down(&usblp->sem);
+		if (rv < 0) {
+			count = -EINTR;
+			goto done;
 		}
-		remove_wait_queue(&usblp->wait, &wait);
 	}
 
 	if (!usblp->present) {
@@ -874,11 +853,10 @@
 
 	/* Malloc and start initializing usblp structure so we can use it
 	 * directly. */
-	if (!(usblp = kmalloc(sizeof(struct usblp), GFP_KERNEL))) {
+	if (!(usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL))) {
 		err("out of memory for usblp");
 		goto abort;
 	}
-	memset(usblp, 0, sizeof(struct usblp));
 	usblp->dev = dev;
 	init_MUTEX (&usblp->sem);
 	init_waitqueue_head(&usblp->wait);
@@ -1214,10 +1192,9 @@
 {
 	int retval;
 	retval = usb_register(&usblp_driver);
-	if (retval)
-		goto out;
-	info(DRIVER_VERSION ": " DRIVER_DESC);
-out:
+	if (!retval)
+		info(DRIVER_VERSION ": " DRIVER_DESC);
+
 	return retval;
 }
 
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 319de03..7135e54 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -13,6 +13,7 @@
 #include <linux/ctype.h>
 #include <linux/device.h>
 #include <asm/byteorder.h>
+#include <asm/scatterlist.h>
 
 #include "hcd.h"	/* for usbcore internals */
 #include "usb.h"
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 0817967..dad4d8f 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -468,6 +468,7 @@
  */
 void usb_kill_urb(struct urb *urb)
 {
+	might_sleep();
 	if (!(urb && urb->dev && urb->dev->bus && urb->dev->bus->op))
 		return;
 	spin_lock_irq(&urb->lock);
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 9a4edc5..0aab7d2 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -135,6 +135,7 @@
 					setup_out_ready : 1,
 					setup_out_error : 1,
 					setup_abort : 1;
+	unsigned			setup_wLength;
 
 	/* the rest is basically write-once */
 	struct usb_config_descriptor	*config, *hs_config;
@@ -942,6 +943,7 @@
 	}
 	req->complete = ep0_complete;
 	req->length = len;
+	req->zero = 0;
 	return 0;
 }
 
@@ -1161,10 +1163,13 @@
 				spin_unlock_irq (&dev->lock);
 				if (copy_from_user (dev->req->buf, buf, len))
 					retval = -EFAULT;
-				else
+				else {
+					if (len < dev->setup_wLength)
+						dev->req->zero = 1;
 					retval = usb_ep_queue (
 						dev->gadget->ep0, dev->req,
 						GFP_KERNEL);
+				}
 				if (retval < 0) {
 					spin_lock_irq (&dev->lock);
 					clean_req (dev->gadget->ep0, dev->req);
@@ -1483,6 +1488,7 @@
 delegate:
 			dev->setup_in = (ctrl->bRequestType & USB_DIR_IN)
 						? 1 : 0;
+			dev->setup_wLength = w_length;
 			dev->setup_out_ready = 0;
 			dev->setup_out_error = 0;
 			value = 0;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index c32e1f7..67b13ab 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -47,6 +47,7 @@
 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 2fc110d..ae7a1c0 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -165,8 +165,8 @@
 static unsigned qlen = 32;
 static unsigned pattern = 0;
 
-module_param (buflen, uint, S_IRUGO|S_IWUSR);
-module_param (qlen, uint, S_IRUGO|S_IWUSR);
+module_param (buflen, uint, S_IRUGO);
+module_param (qlen, uint, S_IRUGO);
 module_param (pattern, uint, S_IRUGO|S_IWUSR);
 
 /*
@@ -1127,8 +1127,10 @@
 	DBG (dev, "unbind\n");
 
 	/* we've already been disconnected ... no i/o is active */
-	if (dev->req)
+	if (dev->req) {
+		dev->req->length = USB_BUFSIZ;
 		free_ep_req (gadget->ep0, dev->req);
+	}
 	del_timer_sync (&dev->resume);
 	kfree (dev);
 	set_gadget_data (gadget, NULL);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 08ca0f8..3a6687d 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -24,46 +24,11 @@
 
 /*-------------------------------------------------------------------------*/
 
-/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
- * off the controller (maybe it can boot from highspeed USB disks).
- */
-static int bios_handoff(struct ehci_hcd *ehci, int where, u32 cap)
-{
-	struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
-
-	/* always say Linux will own the hardware */
-	pci_write_config_byte(pdev, where + 3, 1);
-
-	/* maybe wait a while for BIOS to respond */
-	if (cap & (1 << 16)) {
-		int msec = 5000;
-
-		do {
-			msleep(10);
-			msec -= 10;
-			pci_read_config_dword(pdev, where, &cap);
-		} while ((cap & (1 << 16)) && msec);
-		if (cap & (1 << 16)) {
-			ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
-				where, cap);
-			// some BIOS versions seem buggy...
-			// return 1;
-			ehci_warn(ehci, "continuing after BIOS bug...\n");
-			/* disable all SMIs, and clear "BIOS owns" flag */
-			pci_write_config_dword(pdev, where + 4, 0);
-			pci_write_config_byte(pdev, where + 2, 0);
-		} else
-			ehci_dbg(ehci, "BIOS handoff succeeded\n");
-	}
-	return 0;
-}
-
 /* called after powerup, by probe or system-pm "wakeup" */
 static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 {
 	u32			temp;
 	int			retval;
-	unsigned		count = 256/4;
 
 	/* optional debug port, normally in the first BAR */
 	temp = pci_find_capability(pdev, 0x0a);
@@ -84,32 +49,9 @@
 		}
 	}
 
-	temp = HCC_EXT_CAPS(readl(&ehci->caps->hcc_params));
-
-	/* EHCI 0.96 and later may have "extended capabilities" */
-	while (temp && count--) {
-		u32		cap;
-
-		pci_read_config_dword(pdev, temp, &cap);
-		ehci_dbg(ehci, "capability %04x at %02x\n", cap, temp);
-		switch (cap & 0xff) {
-		case 1:			/* BIOS/SMM/... handoff */
-			if (bios_handoff(ehci, temp, cap) != 0)
-				return -EOPNOTSUPP;
-			break;
-		case 0:			/* illegal reserved capability */
-			ehci_dbg(ehci, "illegal capability!\n");
-			cap = 0;
-			/* FALLTHROUGH */
-		default:		/* unknown */
-			break;
-		}
-		temp = (cap >> 8) & 0xff;
-	}
-	if (!count) {
-		ehci_err(ehci, "bogus capabilities ... PCI problems!\n");
-		return -EIO;
-	}
+	/* we expect static quirk code to handle the "extended capabilities"
+	 * (currently just BIOS handoff) allowed starting with EHCI 0.96
+	 */
 
 	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
 	retval = pci_set_mwi(pdev);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 57e7737..ebcca97 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1063,6 +1063,7 @@
 
 		/* for IN, check CSPLIT */
 		if (stream->c_usecs) {
+			uf = uframe & 7;
 			max_used = 100 - stream->c_usecs;
 			do {
 				tmp = 1 << uf;
@@ -1843,8 +1844,7 @@
 #else
 
 static inline int
-sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
-	unsigned mem_flags)
+sitd_submit (struct ehci_hcd *ehci, struct urb *urb, gfp_t mem_flags)
 {
 	ehci_dbg (ehci, "split iso support is disabled\n");
 	return -ENOSYS;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 584b8dc..972ce04 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1420,20 +1420,22 @@
 	int ret = 0;
 
 	spin_lock_irqsave(&isp116x->lock, flags);
-
 	val = isp116x_read_reg32(isp116x, HCCONTROL);
+
 	switch (val & HCCONTROL_HCFS) {
 	case HCCONTROL_USB_OPER:
+		spin_unlock_irqrestore(&isp116x->lock, flags);
 		val &= (~HCCONTROL_HCFS & ~HCCONTROL_RWE);
 		val |= HCCONTROL_USB_SUSPEND;
 		if (device_may_wakeup(&hcd->self.root_hub->dev))
 			val |= HCCONTROL_RWE;
 		/* Wait for usb transfers to finish */
-		mdelay(2);
+		msleep(2);
+		spin_lock_irqsave(&isp116x->lock, flags);
 		isp116x_write_reg32(isp116x, HCCONTROL, val);
+		spin_unlock_irqrestore(&isp116x->lock, flags);
 		/* Wait for devices to suspend */
-		mdelay(5);
-	case HCCONTROL_USB_SUSPEND:
+		msleep(5);
 		break;
 	case HCCONTROL_USB_RESUME:
 		isp116x_write_reg32(isp116x, HCCONTROL,
@@ -1441,12 +1443,11 @@
 				    HCCONTROL_USB_RESET);
 	case HCCONTROL_USB_RESET:
 		ret = -EBUSY;
+	default:		/* HCCONTROL_USB_SUSPEND */
+		spin_unlock_irqrestore(&isp116x->lock, flags);
 		break;
-	default:
-		ret = -EINVAL;
 	}
 
-	spin_unlock_irqrestore(&isp116x->lock, flags);
 	return ret;
 }
 
@@ -1715,9 +1716,9 @@
 	.remove = isp116x_remove,
 	.suspend = isp116x_suspend,
 	.resume = isp116x_resume,
-	.driver	= {
-		.name = (char *)hcd_name,
-	},
+	.driver = {
+		   .name = (char *)hcd_name,
+		   },
 };
 
 /*-----------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 77cd6ac..db280ca 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -67,7 +67,7 @@
 	       ": stopping Au1xxx OHCI USB Controller\n");
 
 	/* Disable clock */
-	au_writel(readl((void *)USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
+	au_writel(au_readl(USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
 }
 
 
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 3ef2c0c..e9e5bc1 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -190,7 +190,7 @@
 			msleep(10);
 		}
 		if (wait_time <= 0)
-			printk(KERN_WARNING "%s %s: early BIOS handoff "
+			printk(KERN_WARNING "%s %s: BIOS handoff "
 					"failed (BIOS bug ?)\n",
 					pdev->dev.bus_id, "OHCI");
 
@@ -212,8 +212,9 @@
 {
 	int wait_time, delta;
 	void __iomem *base, *op_reg_base;
-	u32 hcc_params, val, temp;
-	u8 cap_length;
+	u32	hcc_params, val;
+	u8	offset, cap_length;
+	int	count = 256/4;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -224,51 +225,80 @@
 
 	cap_length = readb(base);
 	op_reg_base = base + cap_length;
-	hcc_params = readl(base + EHCI_HCC_PARAMS);
-	hcc_params = (hcc_params >> 8) & 0xff;
-	if (hcc_params) {
-		pci_read_config_dword(pdev,
-					hcc_params + EHCI_USBLEGSUP,
-					&val);
-		if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
-			/*
-			 * Ok, BIOS is in smm mode, try to hand off...
-			 */
-			pci_read_config_dword(pdev,
-						hcc_params + EHCI_USBLEGCTLSTS,
-						&temp);
-			pci_write_config_dword(pdev,
-						hcc_params + EHCI_USBLEGCTLSTS,
-						temp | EHCI_USBLEGCTLSTS_SOOE);
-			val |= EHCI_USBLEGSUP_OS;
-			pci_write_config_dword(pdev,
-						hcc_params + EHCI_USBLEGSUP,
-						val);
 
-			wait_time = 500;
-			do {
-				msleep(10);
-				wait_time -= 10;
-				pci_read_config_dword(pdev,
-						hcc_params + EHCI_USBLEGSUP,
-						&val);
-			} while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
-			if (!wait_time) {
-				/*
-				 * well, possibly buggy BIOS...
+	/* EHCI 0.96 and later may have "extended capabilities"
+	 * spec section 5.1 explains the bios handoff, e.g. for
+	 * booting from USB disk or using a usb keyboard
+	 */
+	hcc_params = readl(base + EHCI_HCC_PARAMS);
+	offset = (hcc_params >> 8) & 0xff;
+	while (offset && count--) {
+		u32		cap;
+		int		msec;
+
+		pci_read_config_dword(pdev, offset, &cap);
+		switch (cap & 0xff) {
+		case 1:			/* BIOS/SMM/... handoff support */
+			if ((cap & EHCI_USBLEGSUP_BIOS)) {
+				pr_debug("%s %s: BIOS handoff\n",
+						pdev->dev.bus_id, "EHCI");
+
+				/* BIOS workaround (?): be sure the
+				 * pre-Linux code receives the SMI
 				 */
-				printk(KERN_WARNING "%s %s: early BIOS handoff "
+				pci_read_config_dword(pdev,
+						offset + EHCI_USBLEGCTLSTS,
+						&val);
+				pci_write_config_dword(pdev,
+						offset + EHCI_USBLEGCTLSTS,
+						val | EHCI_USBLEGCTLSTS_SOOE);
+			}
+
+			/* always say Linux will own the hardware
+			 * by setting EHCI_USBLEGSUP_OS.
+			 */
+			pci_write_config_byte(pdev, offset + 3, 1);
+
+			/* if boot firmware now owns EHCI, spin till
+			 * it hands it over.
+			 */
+			msec = 5000;
+			while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) {
+				msleep(10);
+				msec -= 10;
+				pci_read_config_dword(pdev, offset, &cap);
+			}
+
+			if (cap & EHCI_USBLEGSUP_BIOS) {
+				/* well, possibly buggy BIOS... try to shut
+				 * it down, and hope nothing goes too wrong
+				 */
+				printk(KERN_WARNING "%s %s: BIOS handoff "
 						"failed (BIOS bug ?)\n",
 					pdev->dev.bus_id, "EHCI");
-				pci_write_config_dword(pdev,
-						hcc_params + EHCI_USBLEGSUP,
-						EHCI_USBLEGSUP_OS);
-				pci_write_config_dword(pdev,
-						hcc_params + EHCI_USBLEGCTLSTS,
-						0);
+				pci_write_config_byte(pdev, offset + 2, 0);
 			}
+
+			/* just in case, always disable EHCI SMIs */
+			pci_write_config_dword(pdev,
+					offset + EHCI_USBLEGCTLSTS,
+					0);
+			break;
+		case 0:			/* illegal reserved capability */
+			cap = 0;
+			/* FALLTHROUGH */
+		default:
+			printk(KERN_WARNING "%s %s: unrecognized "
+					"capability %02x\n",
+					pdev->dev.bus_id, "EHCI",
+					cap & 0xff);
+			break;
 		}
+		offset = (cap >> 8) & 0xff;
 	}
+	if (!count)
+		printk(KERN_DEBUG "%s %s: capability loop?\n",
+				pdev->dev.bus_id, "EHCI");
 
 	/*
 	 * halt EHCI & disable its interrupts in any case
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index b607600..7823980 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -672,9 +672,9 @@
 	/* Low-speed transfers get a different queue, and won't hog the bus.
 	 * Also, some devices enumerate better without FSBR; the easiest way
 	 * to do that is to put URBs on the low-speed queue while the device
-	 * is in the DEFAULT state. */
+	 * isn't in the CONFIGURED state. */
 	if (urb->dev->speed == USB_SPEED_LOW ||
-			urb->dev->state == USB_STATE_DEFAULT)
+			urb->dev->state != USB_STATE_CONFIGURED)
 		skelqh = uhci->skel_ls_control_qh;
 	else {
 		skelqh = uhci->skel_fs_control_qh;
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index a91e72c..6f7a684 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1307,7 +1307,7 @@
 	}
 
 	if (err)
-		warn("timeout initializing reports\n");
+		warn("timeout initializing reports");
 }
 
 #define USB_VENDOR_ID_WACOM		0x056a
@@ -1453,6 +1453,9 @@
 #define USB_VENDOR_ID_CHERRY		0x046a
 #define USB_DEVICE_ID_CHERRY_CYMOTION	0x0023
 
+#define USB_VENDOR_ID_HP		0x03f0
+#define USB_DEVICE_ID_HP_USBHUB_KB	0x020c
+
 /*
  * Alphabetically sorted blacklist by quirk type.
  */
@@ -1566,6 +1569,7 @@
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_KEYBOARD, HID_QUIRK_NOGET},
 	{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
+	{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
 
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
@@ -1828,9 +1832,6 @@
 	hid->urbctrl->transfer_dma = hid->ctrlbuf_dma;
 	hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
 
-	/* May be needed for some devices */
-	usb_clear_halt(hid->dev, hid->urbin->pipe);
-
 	return hid;
 
 fail:
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 4dff847..77be6b9 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -35,7 +35,6 @@
 #include <linux/usb.h>
 #include "hid.h"
 #include <linux/hiddev.h>
-#include <linux/devfs_fs_kernel.h>
 
 #ifdef CONFIG_USB_DYNAMIC_MINORS
 #define HIDDEV_MINOR_BASE	0
@@ -832,12 +831,10 @@
 
 int __init hiddev_init(void)
 {
-	devfs_mk_dir("usb/hid");
 	return usb_register(&hiddev_driver);
 }
 
 void hiddev_exit(void)
 {
 	usb_deregister(&hiddev_driver);
-	devfs_remove("usb/hid");
 }
diff --git a/drivers/usb/input/touchkitusb.c b/drivers/usb/input/touchkitusb.c
index 3b3c7b4..697c5e5 100644
--- a/drivers/usb/input/touchkitusb.c
+++ b/drivers/usb/input/touchkitusb.c
@@ -337,6 +337,9 @@
 			 touchkit->data, TOUCHKIT_REPORT_DATA_SIZE,
 			 touchkit_irq, touchkit, endpoint->bInterval);
 
+	touchkit->irq->transfer_dma = touchkit->data_dma;
+	touchkit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
 	input_register_device(touchkit->input);
 
 	usb_set_intfdata(intf, touchkit);
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index 1bfc105..37d2f0b 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -59,7 +59,7 @@
 #include "map_to_7segment.h"
 #include "yealink.h"
 
-#define DRIVER_VERSION "yld-20050816"
+#define DRIVER_VERSION "yld-20051230"
 #define DRIVER_AUTHOR "Henk Vergonet"
 #define DRIVER_DESC "Yealink phone driver"
 
@@ -786,16 +786,25 @@
  * Linux interface and usb initialisation
  ******************************************************************************/
 
-static const struct yld_device {
-	u16 idVendor;
-	u16 idProduct;
+struct driver_info {
 	char *name;
-} yld_device[] = {
-	{ 0x6993, 0xb001, "Yealink usb-p1k" },
 };
 
-static struct usb_device_id usb_table [] = {
-	{ USB_INTERFACE_INFO(USB_CLASS_HID, 0, 0) },
+static const struct driver_info info_P1K = {
+	.name	= "Yealink usb-p1k",
+};
+
+static const struct usb_device_id usb_table [] = {
+	{
+		.match_flags		= USB_DEVICE_ID_MATCH_DEVICE |
+						USB_DEVICE_ID_MATCH_INT_INFO,
+		.idVendor		= 0x6993,
+		.idProduct		= 0xb001,
+		.bInterfaceClass	= USB_CLASS_HID,
+		.bInterfaceSubClass	= 0,
+		.bInterfaceProtocol	= 0,
+		.driver_info		= (kernel_ulong_t)&info_P1K
+	},
 	{ }
 };
 
@@ -842,33 +851,16 @@
 	usb_cleanup(yld, 0);
 }
 
-static int usb_match(struct usb_device *udev)
-{
-	int i;
-	u16 idVendor = le16_to_cpu(udev->descriptor.idVendor);
-	u16 idProduct = le16_to_cpu(udev->descriptor.idProduct);
-
-	for (i = 0; i < ARRAY_SIZE(yld_device); i++) {
-		if ((idVendor == yld_device[i].idVendor) &&
-		    (idProduct == yld_device[i].idProduct))
-			return i;
-	}
-	return -ENODEV;
-}
-
 static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *udev = interface_to_usbdev (intf);
+	struct driver_info *nfo = (struct driver_info *)id->driver_info;
 	struct usb_host_interface *interface;
 	struct usb_endpoint_descriptor *endpoint;
 	struct yealink_dev *yld;
 	struct input_dev *input_dev;
 	int ret, pipe, i;
 
-	i = usb_match(udev);
-	if (i < 0)
-		return -ENODEV;
-
 	interface = intf->cur_altsetting;
 	endpoint = &interface->endpoint[0].desc;
 	if (!(endpoint->bEndpointAddress & USB_DIR_IN))
@@ -915,7 +907,7 @@
 	pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
 	ret = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
 	if (ret != USB_PKT_LEN)
-		err("invalid payload size %d, expected %d", ret, USB_PKT_LEN);
+		err("invalid payload size %d, expected %zd", ret, USB_PKT_LEN);
 
 	/* initialise irq urb */
 	usb_fill_int_urb(yld->urb_irq, udev, pipe, yld->irq_data,
@@ -948,7 +940,7 @@
 	strlcat(yld->phys,  "/input0", sizeof(yld->phys));
 
 	/* register settings for the input device */
-	input_dev->name = yld_device[i].name;
+	input_dev->name = nfo->name;
 	input_dev->phys = yld->phys;
 	usb_to_input_id(udev, &input_dev->id);
 	input_dev->cdev.dev = &intf->dev;
diff --git a/drivers/usb/media/Kconfig b/drivers/usb/media/Kconfig
index 21232ee..0d3d2cc 100644
--- a/drivers/usb/media/Kconfig
+++ b/drivers/usb/media/Kconfig
@@ -53,6 +53,21 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called dsbr100.
 
+config USB_ET61X251
+	tristate "USB ET61X[12]51 PC Camera Controller support"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y here if you want support for cameras based on Etoms ET61X151
+	  or ET61X251 PC Camera Controllers.
+
+	  See <file:Documentation/usb/et61x251.txt> for more informations.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" to use this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called et61x251.
+
 config USB_IBMCAM
 	tristate "USB IBM (Xirlink) C-it Camera support"
 	depends on USB && VIDEO_DEV
@@ -209,5 +224,3 @@
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called pwc.
-
-
diff --git a/drivers/usb/media/Makefile b/drivers/usb/media/Makefile
index d83adff..3957aa1 100644
--- a/drivers/usb/media/Makefile
+++ b/drivers/usb/media/Makefile
@@ -3,9 +3,11 @@
 #
 
 sn9c102-objs	:= sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bcb.o sn9c102_tas5110c1b.o sn9c102_tas5130d1b.o
+et61x251-objs	:= et61x251_core.o et61x251_tas5130d1b.o
 
 obj-$(CONFIG_USB_DABUSB)	+= dabusb.o
 obj-$(CONFIG_USB_DSBR)		+= dsbr100.o
+obj-$(CONFIG_USB_ET61X251)	+= et61x251.o
 obj-$(CONFIG_USB_IBMCAM)	+= ibmcam.o usbvideo.o ultracam.o
 obj-$(CONFIG_USB_KONICAWC)	+= konicawc.o usbvideo.o
 obj-$(CONFIG_USB_OV511)		+= ov511.o
diff --git a/drivers/usb/media/et61x251.h b/drivers/usb/media/et61x251.h
new file mode 100644
index 0000000..652238f
--- /dev/null
+++ b/drivers/usb/media/et61x251.h
@@ -0,0 +1,220 @@
+/***************************************************************************
+ * V4L2 driver for ET61X[12]51 PC Camera Controllers                       *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _ET61X251_H_
+#define _ET61X251_H_
+
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/types.h>
+#include <linux/param.h>
+#include <linux/rwsem.h>
+#include <asm/semaphore.h>
+
+#include "et61x251_sensor.h"
+
+/*****************************************************************************/
+
+#define ET61X251_DEBUG
+#define ET61X251_DEBUG_LEVEL         2
+#define ET61X251_MAX_DEVICES         64
+#define ET61X251_PRESERVE_IMGSCALE   0
+#define ET61X251_FORCE_MUNMAP        0
+#define ET61X251_MAX_FRAMES          32
+#define ET61X251_COMPRESSION_QUALITY 0
+#define ET61X251_URBS                2
+#define ET61X251_ISO_PACKETS         7
+#define ET61X251_ALTERNATE_SETTING   13
+#define ET61X251_URB_TIMEOUT         msecs_to_jiffies(2 * ET61X251_ISO_PACKETS)
+#define ET61X251_CTRL_TIMEOUT        100
+
+/*****************************************************************************/
+
+static const struct usb_device_id et61x251_id_table[] = {
+	{ USB_DEVICE(0x102c, 0x6151), },
+	{ USB_DEVICE(0x102c, 0x6251), },
+	{ USB_DEVICE(0x102c, 0x6253), },
+	{ USB_DEVICE(0x102c, 0x6254), },
+	{ USB_DEVICE(0x102c, 0x6255), },
+	{ USB_DEVICE(0x102c, 0x6256), },
+	{ USB_DEVICE(0x102c, 0x6257), },
+	{ USB_DEVICE(0x102c, 0x6258), },
+	{ USB_DEVICE(0x102c, 0x6259), },
+	{ USB_DEVICE(0x102c, 0x625a), },
+	{ USB_DEVICE(0x102c, 0x625b), },
+	{ USB_DEVICE(0x102c, 0x625c), },
+	{ USB_DEVICE(0x102c, 0x625d), },
+	{ USB_DEVICE(0x102c, 0x625e), },
+	{ USB_DEVICE(0x102c, 0x625f), },
+	{ USB_DEVICE(0x102c, 0x6260), },
+	{ USB_DEVICE(0x102c, 0x6261), },
+	{ USB_DEVICE(0x102c, 0x6262), },
+	{ USB_DEVICE(0x102c, 0x6263), },
+	{ USB_DEVICE(0x102c, 0x6264), },
+	{ USB_DEVICE(0x102c, 0x6265), },
+	{ USB_DEVICE(0x102c, 0x6266), },
+	{ USB_DEVICE(0x102c, 0x6267), },
+	{ USB_DEVICE(0x102c, 0x6268), },
+	{ USB_DEVICE(0x102c, 0x6269), },
+	{ }
+};
+
+ET61X251_SENSOR_TABLE
+
+/*****************************************************************************/
+
+enum et61x251_frame_state {
+	F_UNUSED,
+	F_QUEUED,
+	F_GRABBING,
+	F_DONE,
+	F_ERROR,
+};
+
+struct et61x251_frame_t {
+	void* bufmem;
+	struct v4l2_buffer buf;
+	enum et61x251_frame_state state;
+	struct list_head frame;
+	unsigned long vma_use_count;
+};
+
+enum et61x251_dev_state {
+	DEV_INITIALIZED = 0x01,
+	DEV_DISCONNECTED = 0x02,
+	DEV_MISCONFIGURED = 0x04,
+};
+
+enum et61x251_io_method {
+	IO_NONE,
+	IO_READ,
+	IO_MMAP,
+};
+
+enum et61x251_stream_state {
+	STREAM_OFF,
+	STREAM_INTERRUPT,
+	STREAM_ON,
+};
+
+struct et61x251_sysfs_attr {
+	u8 reg, i2c_reg;
+};
+
+struct et61x251_module_param {
+	u8 force_munmap;
+};
+
+static DECLARE_MUTEX(et61x251_sysfs_lock);
+static DECLARE_RWSEM(et61x251_disconnect);
+
+struct et61x251_device {
+	struct video_device* v4ldev;
+
+	struct et61x251_sensor* sensor;
+
+	struct usb_device* usbdev;
+	struct urb* urb[ET61X251_URBS];
+	void* transfer_buffer[ET61X251_URBS];
+	u8* control_buffer;
+
+	struct et61x251_frame_t *frame_current, frame[ET61X251_MAX_FRAMES];
+	struct list_head inqueue, outqueue;
+	u32 frame_count, nbuffers, nreadbuffers;
+
+	enum et61x251_io_method io;
+	enum et61x251_stream_state stream;
+
+	struct v4l2_jpegcompression compression;
+
+	struct et61x251_sysfs_attr sysfs;
+	struct et61x251_module_param module_param;
+
+	enum et61x251_dev_state state;
+	u8 users;
+
+	struct semaphore dev_sem, fileop_sem;
+	spinlock_t queue_lock;
+	wait_queue_head_t open, wait_frame, wait_stream;
+};
+
+/*****************************************************************************/
+
+void
+et61x251_attach_sensor(struct et61x251_device* cam,
+                       struct et61x251_sensor* sensor)
+{
+	cam->sensor = sensor;
+	cam->sensor->usbdev = cam->usbdev;
+}
+
+/*****************************************************************************/
+
+#undef DBG
+#undef KDBG
+#ifdef ET61X251_DEBUG
+#	define DBG(level, fmt, args...)                                       \
+do {                                                                          \
+	if (debug >= (level)) {                                               \
+		if ((level) == 1)                                             \
+			dev_err(&cam->usbdev->dev, fmt "\n", ## args);        \
+		else if ((level) == 2)                                        \
+			dev_info(&cam->usbdev->dev, fmt "\n", ## args);       \
+		else if ((level) >= 3)                                        \
+			dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n",      \
+			         __FUNCTION__, __LINE__ , ## args);           \
+	}                                                                     \
+} while (0)
+#	define KDBG(level, fmt, args...)                                      \
+do {                                                                          \
+	if (debug >= (level)) {                                               \
+		if ((level) == 1 || (level) == 2)                             \
+			pr_info("et61x251: " fmt "\n", ## args);              \
+		else if ((level) == 3)                                        \
+			pr_debug("et61x251: [%s:%d] " fmt "\n", __FUNCTION__, \
+			         __LINE__ , ## args);                         \
+	}                                                                     \
+} while (0)
+#	define V4LDBG(level, name, cmd)                                       \
+do {                                                                          \
+	if (debug >= (level))                                                 \
+		v4l_print_ioctl(name, cmd);                                   \
+} while (0)
+#else
+#	define DBG(level, fmt, args...) do {;} while(0)
+#	define KDBG(level, fmt, args...) do {;} while(0)
+#	define V4LDBG(level, name, cmd) do {;} while(0)
+#endif
+
+#undef PDBG
+#define PDBG(fmt, args...)                                                    \
+dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args)
+
+#undef PDBGG
+#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
+
+#endif /* _ET61X251_H_ */
diff --git a/drivers/usb/media/et61x251_core.c b/drivers/usb/media/et61x251_core.c
new file mode 100644
index 0000000..2c0171a
--- /dev/null
+++ b/drivers/usb/media/et61x251_core.c
@@ -0,0 +1,2605 @@
+/***************************************************************************
+ * V4L2 driver for ET61X[12]51 PC Camera Controllers                       *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/moduleparam.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/poll.h>
+#include <linux/stat.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/page-flags.h>
+#include <linux/byteorder/generic.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
+
+#include "et61x251.h"
+
+/*****************************************************************************/
+
+#define ET61X251_MODULE_NAME    "V4L2 driver for ET61X[12]51 "                \
+                                "PC Camera Controllers"
+#define ET61X251_MODULE_AUTHOR  "(C) 2006 Luca Risolia"
+#define ET61X251_AUTHOR_EMAIL   "<luca.risolia@studio.unibo.it>"
+#define ET61X251_MODULE_LICENSE "GPL"
+#define ET61X251_MODULE_VERSION "1:1.01"
+#define ET61X251_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 1)
+
+/*****************************************************************************/
+
+MODULE_DEVICE_TABLE(usb, et61x251_id_table);
+
+MODULE_AUTHOR(ET61X251_MODULE_AUTHOR " " ET61X251_AUTHOR_EMAIL);
+MODULE_DESCRIPTION(ET61X251_MODULE_NAME);
+MODULE_VERSION(ET61X251_MODULE_VERSION);
+MODULE_LICENSE(ET61X251_MODULE_LICENSE);
+
+static short video_nr[] = {[0 ... ET61X251_MAX_DEVICES-1] = -1};
+module_param_array(video_nr, short, NULL, 0444);
+MODULE_PARM_DESC(video_nr,
+                 "\n<-1|n[,...]> Specify V4L2 minor mode number."
+                 "\n -1 = use next available (default)"
+                 "\n  n = use minor number n (integer >= 0)"
+                 "\nYou can specify up to "
+                 __MODULE_STRING(ET61X251_MAX_DEVICES) " cameras this way."
+                 "\nFor example:"
+                 "\nvideo_nr=-1,2,-1 would assign minor number 2 to"
+                 "\nthe second registered camera and use auto for the first"
+                 "\none and for every other camera."
+                 "\n");
+
+static short force_munmap[] = {[0 ... ET61X251_MAX_DEVICES-1] =
+                               ET61X251_FORCE_MUNMAP};
+module_param_array(force_munmap, bool, NULL, 0444);
+MODULE_PARM_DESC(force_munmap,
+                 "\n<0|1[,...]> Force the application to unmap previously"
+                 "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+                 "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+                 "\nthis feature. This parameter is specific for each"
+                 "\ndetected camera."
+                 "\n 0 = do not force memory unmapping"
+                 "\n 1 = force memory unmapping (save memory)"
+                 "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
+                 "\n");
+
+#ifdef ET61X251_DEBUG
+static unsigned short debug = ET61X251_DEBUG_LEVEL;
+module_param(debug, ushort, 0644);
+MODULE_PARM_DESC(debug,
+                 "\n<n> Debugging information level, from 0 to 3:"
+                 "\n0 = none (use carefully)"
+                 "\n1 = critical errors"
+                 "\n2 = significant informations"
+                 "\n3 = more verbose messages"
+                 "\nLevel 3 is useful for testing only, when only "
+                 "one device is used."
+                 "\nDefault value is "__MODULE_STRING(ET61X251_DEBUG_LEVEL)"."
+                 "\n");
+#endif
+
+/*****************************************************************************/
+
+static u32
+et61x251_request_buffers(struct et61x251_device* cam, u32 count,
+                         enum et61x251_io_method io)
+{
+	struct v4l2_pix_format* p = &(cam->sensor->pix_format);
+	struct v4l2_rect* r = &(cam->sensor->cropcap.bounds);
+	const size_t imagesize = cam->module_param.force_munmap ||
+	                         io == IO_READ ?
+	                         (p->width * p->height * p->priv) / 8 :
+	                         (r->width * r->height * p->priv) / 8;
+	void* buff = NULL;
+	u32 i;
+
+	if (count > ET61X251_MAX_FRAMES)
+		count = ET61X251_MAX_FRAMES;
+
+	cam->nbuffers = count;
+	while (cam->nbuffers > 0) {
+		if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
+			break;
+		cam->nbuffers--;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++) {
+		cam->frame[i].bufmem = buff + i*PAGE_ALIGN(imagesize);
+		cam->frame[i].buf.index = i;
+		cam->frame[i].buf.m.offset = i*PAGE_ALIGN(imagesize);
+		cam->frame[i].buf.length = imagesize;
+		cam->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		cam->frame[i].buf.sequence = 0;
+		cam->frame[i].buf.field = V4L2_FIELD_NONE;
+		cam->frame[i].buf.memory = V4L2_MEMORY_MMAP;
+		cam->frame[i].buf.flags = 0;
+	}
+
+	return cam->nbuffers;
+}
+
+
+static void et61x251_release_buffers(struct et61x251_device* cam)
+{
+	if (cam->nbuffers) {
+		vfree(cam->frame[0].bufmem);
+		cam->nbuffers = 0;
+	}
+	cam->frame_current = NULL;
+}
+
+
+static void et61x251_empty_framequeues(struct et61x251_device* cam)
+{
+	u32 i;
+
+	INIT_LIST_HEAD(&cam->inqueue);
+	INIT_LIST_HEAD(&cam->outqueue);
+
+	for (i = 0; i < ET61X251_MAX_FRAMES; i++) {
+		cam->frame[i].state = F_UNUSED;
+		cam->frame[i].buf.bytesused = 0;
+	}
+}
+
+
+static void et61x251_requeue_outqueue(struct et61x251_device* cam)
+{
+	struct et61x251_frame_t *i;
+
+	list_for_each_entry(i, &cam->outqueue, frame) {
+		i->state = F_QUEUED;
+		list_add(&i->frame, &cam->inqueue);
+	}
+
+	INIT_LIST_HEAD(&cam->outqueue);
+}
+
+
+static void et61x251_queue_unusedframes(struct et61x251_device* cam)
+{
+	unsigned long lock_flags;
+	u32 i;
+
+	for (i = 0; i < cam->nbuffers; i++)
+		if (cam->frame[i].state == F_UNUSED) {
+			cam->frame[i].state = F_QUEUED;
+			spin_lock_irqsave(&cam->queue_lock, lock_flags);
+			list_add_tail(&cam->frame[i].frame, &cam->inqueue);
+			spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+		}
+}
+
+/*****************************************************************************/
+
+int et61x251_write_reg(struct et61x251_device* cam, u8 value, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* buff = cam->control_buffer;
+	int res;
+
+	*buff = value;
+
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+	                      0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
+	if (res < 0) {
+		DBG(3, "Failed to write a register (value 0x%02X, index "
+		       "0x%02X, error %d)", value, index, res);
+		return -1;
+	}
+
+	return 0;
+}
+
+
+int et61x251_read_reg(struct et61x251_device* cam, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* buff = cam->control_buffer;
+	int res;
+
+	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
+	                      0, index, buff, 1, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		DBG(3, "Failed to read a register (index 0x%02X, error %d)",
+		    index, res);
+
+	return (res >= 0) ? (int)(*buff) : -1;
+}
+
+
+static int
+et61x251_i2c_wait(struct et61x251_device* cam, struct et61x251_sensor* sensor)
+{
+	int i, r;
+
+	for (i = 1; i <= 8; i++) {
+		if (sensor->interface == ET61X251_I2C_3WIRES) {
+			r = et61x251_read_reg(cam, 0x8e);
+			if (!(r & 0x02) && (r >= 0))
+				return 0;
+		} else {
+			r = et61x251_read_reg(cam, 0x8b);
+			if (!(r & 0x01) && (r >= 0))
+				return 0;
+		}
+		if (r < 0)
+			return -EIO;
+		udelay(8*8); /* minimum for sensors at 400kHz */
+	}
+
+	return -EBUSY;
+}
+
+
+int
+et61x251_i2c_try_read(struct et61x251_device* cam,
+                      struct et61x251_sensor* sensor, u8 address)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* data = cam->control_buffer;
+	int err = 0, res;
+
+	data[0] = address;
+	data[1] = cam->sensor->i2c_slave_id;
+	data[2] = cam->sensor->rsta | 0x10;
+	data[3] = !(et61x251_read_reg(cam, 0x8b) & 0x02);
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+	                      0, 0x88, data, 4, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	err += et61x251_i2c_wait(cam, sensor);
+
+	res = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, 0xc1,
+	                      0, 0x80, data, 8, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	if (err)
+		DBG(3, "I2C read failed for %s image sensor", sensor->name);
+
+	PDBGG("I2C read: address 0x%02X, value: 0x%02X", address, data[0]);
+
+	return err ? -1 : (int)data[0];
+}
+
+
+int
+et61x251_i2c_try_write(struct et61x251_device* cam,
+                       struct et61x251_sensor* sensor, u8 address, u8 value)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* data = cam->control_buffer;
+	int err = 0, res;
+
+	data[0] = address;
+	data[1] = cam->sensor->i2c_slave_id;
+	data[2] = cam->sensor->rsta | 0x12;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+	                      0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	data[0] = value;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+	                      0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	err += et61x251_i2c_wait(cam, sensor);
+
+	if (err)
+		DBG(3, "I2C write failed for %s image sensor", sensor->name);
+
+	PDBGG("I2C write: address 0x%02X, value: 0x%02X", address, value);
+
+	return err ? -1 : 0;
+}
+
+
+int
+et61x251_i2c_raw_write(struct et61x251_device* cam, u8 n, u8 data1, u8 data2,
+                       u8 data3, u8 data4, u8 data5, u8 data6, u8 data7,
+                       u8 data8, u8 address)
+{
+	struct usb_device* udev = cam->usbdev;
+	u8* data = cam->control_buffer;
+	int err = 0, res;
+
+	if (!cam->sensor)
+		return -1;
+
+	data[0] = data2;
+	data[1] = data3;
+	data[2] = data4;
+	data[3] = data5;
+	data[4] = data6;
+	data[5] = data7;
+	data[6] = data8;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+	                      0, 0x81, data, n-1, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	data[0] = address;
+	data[1] = cam->sensor->i2c_slave_id;
+	data[2] = cam->sensor->rsta | 0x02 | (n << 4);
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+	                      0, 0x88, data, 3, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	/* Start writing through the serial interface */
+	data[0] = data1;
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x00, 0x41,
+	                      0, 0x80, data, 1, ET61X251_CTRL_TIMEOUT);
+	if (res < 0)
+		err += res;
+
+	err += et61x251_i2c_wait(cam, cam->sensor);
+
+	if (err)
+		DBG(3, "I2C raw write failed for %s image sensor",
+		    cam->sensor->name);
+
+	PDBGG("I2C raw write: %u bytes, address = 0x%02X, data1 = 0x%02X, "
+	      "data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X,"
+	      " data6 = 0x%02X, data7 = 0x%02X, data8 = 0x%02X", n, address,
+	      data1, data2, data3, data4, data5, data6, data7, data8);
+
+	return err ? -1 : 0;
+
+}
+
+
+int et61x251_i2c_read(struct et61x251_device* cam, u8 address)
+{
+	if (!cam->sensor)
+		return -1;
+
+	return et61x251_i2c_try_read(cam, cam->sensor, address);
+}
+
+
+int et61x251_i2c_write(struct et61x251_device* cam, u8 address, u8 value)
+{
+	if (!cam->sensor)
+		return -1;
+
+	return et61x251_i2c_try_write(cam, cam->sensor, address, value);
+}
+
+/*****************************************************************************/
+
+static void et61x251_urb_complete(struct urb *urb, struct pt_regs* regs)
+{
+	struct et61x251_device* cam = urb->context;
+	struct et61x251_frame_t** f;
+	size_t imagesize;
+	u8 i;
+	int err = 0;
+
+	if (urb->status == -ENOENT)
+		return;
+
+	f = &cam->frame_current;
+
+	if (cam->stream == STREAM_INTERRUPT) {
+		cam->stream = STREAM_OFF;
+		if ((*f))
+			(*f)->state = F_QUEUED;
+		DBG(3, "Stream interrupted");
+		wake_up_interruptible(&cam->wait_stream);
+	}
+
+	if (cam->state & DEV_DISCONNECTED)
+		return;
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		wake_up_interruptible(&cam->wait_frame);
+		return;
+	}
+
+	if (cam->stream == STREAM_OFF || list_empty(&cam->inqueue))
+		goto resubmit_urb;
+
+	if (!(*f))
+		(*f) = list_entry(cam->inqueue.next, struct et61x251_frame_t,
+		                  frame);
+
+	imagesize = (cam->sensor->pix_format.width *
+	             cam->sensor->pix_format.height *
+	             cam->sensor->pix_format.priv) / 8;
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		unsigned int len, status;
+		void *pos;
+		u8* b1, * b2, sof;
+		const u8 VOID_BYTES = 6;
+		size_t imglen;
+
+		len = urb->iso_frame_desc[i].actual_length;
+		status = urb->iso_frame_desc[i].status;
+		pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
+
+		if (status) {
+			DBG(3, "Error in isochronous frame");
+			(*f)->state = F_ERROR;
+			continue;
+		}
+
+		b1 = pos++;
+		b2 = pos++;
+		sof = ((*b1 & 0x3f) == 63);
+		imglen = ((*b1 & 0xc0) << 2) | *b2;
+
+		PDBGG("Isochrnous frame: length %u, #%u i, image length %zu",
+		      len, i, imglen);
+
+		if ((*f)->state == F_QUEUED || (*f)->state == F_ERROR)
+start_of_frame:
+			if (sof) {
+				(*f)->state = F_GRABBING;
+				(*f)->buf.bytesused = 0;
+				do_gettimeofday(&(*f)->buf.timestamp);
+				pos += 22;
+				DBG(3, "SOF detected: new video frame");
+			}
+
+		if ((*f)->state == F_GRABBING) {
+			if (sof && (*f)->buf.bytesused) {
+				if (cam->sensor->pix_format.pixelformat ==
+				                         V4L2_PIX_FMT_ET61X251)
+					goto end_of_frame;
+				else {
+					DBG(3, "Not expected SOF detected "
+					       "after %lu bytes",
+					   (unsigned long)(*f)->buf.bytesused);
+					(*f)->state = F_ERROR;
+					continue;
+				}
+			}
+
+			if ((*f)->buf.bytesused + imglen > imagesize) {
+				DBG(3, "Video frame size exceeded");
+				(*f)->state = F_ERROR;
+				continue;
+			}
+
+			pos += VOID_BYTES;
+
+			memcpy((*f)->bufmem+(*f)->buf.bytesused, pos, imglen);
+			(*f)->buf.bytesused += imglen;
+
+			if ((*f)->buf.bytesused == imagesize) {
+				u32 b;
+end_of_frame:
+				b = (*f)->buf.bytesused;
+				(*f)->state = F_DONE;
+				(*f)->buf.sequence= ++cam->frame_count;
+				spin_lock(&cam->queue_lock);
+				list_move_tail(&(*f)->frame, &cam->outqueue);
+				if (!list_empty(&cam->inqueue))
+					(*f) = list_entry(cam->inqueue.next,
+					               struct et61x251_frame_t,
+					                  frame);
+				else
+					(*f) = NULL;
+				spin_unlock(&cam->queue_lock);
+				DBG(3, "Video frame captured: : %lu bytes",
+				       (unsigned long)(b));
+
+				if (!(*f))
+					goto resubmit_urb;
+
+				if (sof &&
+				    cam->sensor->pix_format.pixelformat ==
+				                         V4L2_PIX_FMT_ET61X251)
+					goto start_of_frame;
+			}
+		}
+	}
+
+resubmit_urb:
+	urb->dev = cam->usbdev;
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0 && err != -EPERM) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "usb_submit_urb() failed");
+	}
+
+	wake_up_interruptible(&cam->wait_frame);
+}
+
+
+static int et61x251_start_transfer(struct et61x251_device* cam)
+{
+	struct usb_device *udev = cam->usbdev;
+	struct urb* urb;
+	const unsigned int wMaxPacketSize[] = {0, 256, 384, 512, 640, 768, 832,
+	                                       864, 896, 920, 956, 980, 1000,
+	                                       1022};
+	const unsigned int psz = wMaxPacketSize[ET61X251_ALTERNATE_SETTING];
+	s8 i, j;
+	int err = 0;
+
+	for (i = 0; i < ET61X251_URBS; i++) {
+		cam->transfer_buffer[i] = kzalloc(ET61X251_ISO_PACKETS * psz,
+		                                  GFP_KERNEL);
+		if (!cam->transfer_buffer[i]) {
+			err = -ENOMEM;
+			DBG(1, "Not enough memory");
+			goto free_buffers;
+		}
+	}
+
+	for (i = 0; i < ET61X251_URBS; i++) {
+		urb = usb_alloc_urb(ET61X251_ISO_PACKETS, GFP_KERNEL);
+		cam->urb[i] = urb;
+		if (!urb) {
+			err = -ENOMEM;
+			DBG(1, "usb_alloc_urb() failed");
+			goto free_urbs;
+		}
+		urb->dev = udev;
+		urb->context = cam;
+		urb->pipe = usb_rcvisocpipe(udev, 1);
+		urb->transfer_flags = URB_ISO_ASAP;
+		urb->number_of_packets = ET61X251_ISO_PACKETS;
+		urb->complete = et61x251_urb_complete;
+		urb->transfer_buffer = cam->transfer_buffer[i];
+		urb->transfer_buffer_length = psz * ET61X251_ISO_PACKETS;
+		urb->interval = 1;
+		for (j = 0; j < ET61X251_ISO_PACKETS; j++) {
+			urb->iso_frame_desc[j].offset = psz * j;
+			urb->iso_frame_desc[j].length = psz;
+		}
+	}
+
+	err = et61x251_write_reg(cam, 0x01, 0x03);
+	err = et61x251_write_reg(cam, 0x00, 0x03);
+	err = et61x251_write_reg(cam, 0x08, 0x03);
+	if (err) {
+		err = -EIO;
+		DBG(1, "I/O hardware error");
+		goto free_urbs;
+	}
+
+	err = usb_set_interface(udev, 0, ET61X251_ALTERNATE_SETTING);
+	if (err) {
+		DBG(1, "usb_set_interface() failed");
+		goto free_urbs;
+	}
+
+	cam->frame_current = NULL;
+
+	for (i = 0; i < ET61X251_URBS; i++) {
+		err = usb_submit_urb(cam->urb[i], GFP_KERNEL);
+		if (err) {
+			for (j = i-1; j >= 0; j--)
+				usb_kill_urb(cam->urb[j]);
+			DBG(1, "usb_submit_urb() failed, error %d", err);
+			goto free_urbs;
+		}
+	}
+
+	return 0;
+
+free_urbs:
+	for (i = 0; (i < ET61X251_URBS) &&  cam->urb[i]; i++)
+		usb_free_urb(cam->urb[i]);
+
+free_buffers:
+	for (i = 0; (i < ET61X251_URBS) && cam->transfer_buffer[i]; i++)
+		kfree(cam->transfer_buffer[i]);
+
+	return err;
+}
+
+
+static int et61x251_stop_transfer(struct et61x251_device* cam)
+{
+	struct usb_device *udev = cam->usbdev;
+	s8 i;
+	int err = 0;
+
+	if (cam->state & DEV_DISCONNECTED)
+		return 0;
+
+	for (i = ET61X251_URBS-1; i >= 0; i--) {
+		usb_kill_urb(cam->urb[i]);
+		usb_free_urb(cam->urb[i]);
+		kfree(cam->transfer_buffer[i]);
+	}
+
+	err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
+	if (err)
+		DBG(3, "usb_set_interface() failed");
+
+	return err;
+}
+
+
+static int et61x251_stream_interrupt(struct et61x251_device* cam)
+{
+	int err = 0;
+
+	cam->stream = STREAM_INTERRUPT;
+	err = wait_event_timeout(cam->wait_stream,
+	                         (cam->stream == STREAM_OFF) ||
+	                         (cam->state & DEV_DISCONNECTED),
+	                         ET61X251_URB_TIMEOUT);
+	if (cam->state & DEV_DISCONNECTED)
+		return -ENODEV;
+	else if (err) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "URB timeout reached. The camera is misconfigured. To "
+		       "use it, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return err;
+	}
+
+	return 0;
+}
+
+/*****************************************************************************/
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static u8 et61x251_strtou8(const char* buff, size_t len, ssize_t* count)
+{
+	char str[5];
+	char* endp;
+	unsigned long val;
+
+	if (len < 4) {
+		strncpy(str, buff, len);
+		str[len+1] = '\0';
+	} else {
+		strncpy(str, buff, 4);
+		str[4] = '\0';
+	}
+
+	val = simple_strtoul(str, &endp, 0);
+
+	*count = 0;
+	if (val <= 0xff)
+		*count = (ssize_t)(endp - str);
+	if ((*count) && (len == *count+1) && (buff[*count] == '\n'))
+		*count += 1;
+
+	return (u8)val;
+}
+
+/*
+   NOTE 1: being inside one of the following methods implies that the v4l
+           device exists for sure (see kobjects and reference counters)
+   NOTE 2: buffers are PAGE_SIZE long
+*/
+
+static ssize_t et61x251_show_reg(struct class_device* cd, char* buf)
+{
+	struct et61x251_device* cam;
+	ssize_t count;
+
+	if (down_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		up(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	count = sprintf(buf, "%u\n", cam->sysfs.reg);
+
+	up(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+et61x251_store_reg(struct class_device* cd, const char* buf, size_t len)
+{
+	struct et61x251_device* cam;
+	u8 index;
+	ssize_t count;
+
+	if (down_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		up(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	index = et61x251_strtou8(buf, len, &count);
+	if (index > 0x8e || !count) {
+		up(&et61x251_sysfs_lock);
+		return -EINVAL;
+	}
+
+	cam->sysfs.reg = index;
+
+	DBG(2, "Moved ET61X[12]51 register index to 0x%02X", cam->sysfs.reg);
+	DBG(3, "Written bytes: %zd", count);
+
+	up(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t et61x251_show_val(struct class_device* cd, char* buf)
+{
+	struct et61x251_device* cam;
+	ssize_t count;
+	int val;
+
+	if (down_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		up(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	if ((val = et61x251_read_reg(cam, cam->sysfs.reg)) < 0) {
+		up(&et61x251_sysfs_lock);
+		return -EIO;
+	}
+
+	count = sprintf(buf, "%d\n", val);
+
+	DBG(3, "Read bytes: %zd", count);
+
+	up(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+et61x251_store_val(struct class_device* cd, const char* buf, size_t len)
+{
+	struct et61x251_device* cam;
+	u8 value;
+	ssize_t count;
+	int err;
+
+	if (down_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		up(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	value = et61x251_strtou8(buf, len, &count);
+	if (!count) {
+		up(&et61x251_sysfs_lock);
+		return -EINVAL;
+	}
+
+	err = et61x251_write_reg(cam, value, cam->sysfs.reg);
+	if (err) {
+		up(&et61x251_sysfs_lock);
+		return -EIO;
+	}
+
+	DBG(2, "Written ET61X[12]51 reg. 0x%02X, val. 0x%02X",
+	    cam->sysfs.reg, value);
+	DBG(3, "Written bytes: %zd", count);
+
+	up(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t et61x251_show_i2c_reg(struct class_device* cd, char* buf)
+{
+	struct et61x251_device* cam;
+	ssize_t count;
+
+	if (down_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		up(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg);
+
+	DBG(3, "Read bytes: %zd", count);
+
+	up(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+et61x251_store_i2c_reg(struct class_device* cd, const char* buf, size_t len)
+{
+	struct et61x251_device* cam;
+	u8 index;
+	ssize_t count;
+
+	if (down_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		up(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	index = et61x251_strtou8(buf, len, &count);
+	if (!count) {
+		up(&et61x251_sysfs_lock);
+		return -EINVAL;
+	}
+
+	cam->sysfs.i2c_reg = index;
+
+	DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg);
+	DBG(3, "Written bytes: %zd", count);
+
+	up(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t et61x251_show_i2c_val(struct class_device* cd, char* buf)
+{
+	struct et61x251_device* cam;
+	ssize_t count;
+	int val;
+
+	if (down_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		up(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	if (!(cam->sensor->sysfs_ops & ET61X251_I2C_READ)) {
+		up(&et61x251_sysfs_lock);
+		return -ENOSYS;
+	}
+
+	if ((val = et61x251_i2c_read(cam, cam->sysfs.i2c_reg)) < 0) {
+		up(&et61x251_sysfs_lock);
+		return -EIO;
+	}
+
+	count = sprintf(buf, "%d\n", val);
+
+	DBG(3, "Read bytes: %zd", count);
+
+	up(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static ssize_t
+et61x251_store_i2c_val(struct class_device* cd, const char* buf, size_t len)
+{
+	struct et61x251_device* cam;
+	u8 value;
+	ssize_t count;
+	int err;
+
+	if (down_interruptible(&et61x251_sysfs_lock))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(to_video_device(cd));
+	if (!cam) {
+		up(&et61x251_sysfs_lock);
+		return -ENODEV;
+	}
+
+	if (!(cam->sensor->sysfs_ops & ET61X251_I2C_READ)) {
+		up(&et61x251_sysfs_lock);
+		return -ENOSYS;
+	}
+
+	value = et61x251_strtou8(buf, len, &count);
+	if (!count) {
+		up(&et61x251_sysfs_lock);
+		return -EINVAL;
+	}
+
+	err = et61x251_i2c_write(cam, cam->sysfs.i2c_reg, value);
+	if (err) {
+		up(&et61x251_sysfs_lock);
+		return -EIO;
+	}
+
+	DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X",
+	    cam->sysfs.i2c_reg, value);
+	DBG(3, "Written bytes: %zd", count);
+
+	up(&et61x251_sysfs_lock);
+
+	return count;
+}
+
+
+static CLASS_DEVICE_ATTR(reg, S_IRUGO | S_IWUSR,
+                         et61x251_show_reg, et61x251_store_reg);
+static CLASS_DEVICE_ATTR(val, S_IRUGO | S_IWUSR,
+                         et61x251_show_val, et61x251_store_val);
+static CLASS_DEVICE_ATTR(i2c_reg, S_IRUGO | S_IWUSR,
+                         et61x251_show_i2c_reg, et61x251_store_i2c_reg);
+static CLASS_DEVICE_ATTR(i2c_val, S_IRUGO | S_IWUSR,
+                         et61x251_show_i2c_val, et61x251_store_i2c_val);
+
+
+static void et61x251_create_sysfs(struct et61x251_device* cam)
+{
+	struct video_device *v4ldev = cam->v4ldev;
+
+	video_device_create_file(v4ldev, &class_device_attr_reg);
+	video_device_create_file(v4ldev, &class_device_attr_val);
+	if (cam->sensor && cam->sensor->sysfs_ops) {
+		video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
+		video_device_create_file(v4ldev, &class_device_attr_i2c_val);
+	}
+}
+#endif /* CONFIG_VIDEO_ADV_DEBUG */
+
+/*****************************************************************************/
+
+static int
+et61x251_set_pix_format(struct et61x251_device* cam,
+                        struct v4l2_pix_format* pix)
+{
+	int r, err = 0;
+
+	if ((r = et61x251_read_reg(cam, 0x12)) < 0)
+		err += r;
+	if (pix->pixelformat == V4L2_PIX_FMT_ET61X251)
+		err += et61x251_write_reg(cam, r & 0xfd, 0x12);
+	else
+		err += et61x251_write_reg(cam, r | 0x02, 0x12);
+
+	return err ? -EIO : 0;
+}
+
+
+static int
+et61x251_set_compression(struct et61x251_device* cam,
+                         struct v4l2_jpegcompression* compression)
+{
+	int r, err = 0;
+
+	if ((r = et61x251_read_reg(cam, 0x12)) < 0)
+		err += r;
+	if (compression->quality == 0)
+		err += et61x251_write_reg(cam, r & 0xfb, 0x12);
+	else
+		err += et61x251_write_reg(cam, r | 0x04, 0x12);
+
+	return err ? -EIO : 0;
+}
+
+
+static int et61x251_set_scale(struct et61x251_device* cam, u8 scale)
+{
+	int r = 0, err = 0;
+
+	r = et61x251_read_reg(cam, 0x12);
+	if (r < 0)
+		err += r;
+
+	if (scale == 1)
+		err += et61x251_write_reg(cam, r & ~0x01, 0x12);
+	else if (scale == 2)
+		err += et61x251_write_reg(cam, r | 0x01, 0x12);
+
+	if (err)
+		return -EIO;
+
+	PDBGG("Scaling factor: %u", scale);
+
+	return 0;
+}
+
+
+static int
+et61x251_set_crop(struct et61x251_device* cam, struct v4l2_rect* rect)
+{
+	struct et61x251_sensor* s = cam->sensor;
+	u16 fmw_sx = (u16)(rect->left - s->cropcap.bounds.left +
+	                   s->active_pixel.left),
+	    fmw_sy = (u16)(rect->top - s->cropcap.bounds.top +
+	                   s->active_pixel.top),
+	    fmw_length = (u16)(rect->width),
+	    fmw_height = (u16)(rect->height);
+	int err = 0;
+
+	err += et61x251_write_reg(cam, fmw_sx & 0xff, 0x69);
+	err += et61x251_write_reg(cam, fmw_sy & 0xff, 0x6a);
+	err += et61x251_write_reg(cam, fmw_length & 0xff, 0x6b);
+	err += et61x251_write_reg(cam, fmw_height & 0xff, 0x6c);
+	err += et61x251_write_reg(cam, (fmw_sx >> 8) | ((fmw_sy & 0x300) >> 6)
+	                               | ((fmw_length & 0x300) >> 4)
+	                               | ((fmw_height & 0x300) >> 2), 0x6d);
+	if (err)
+		return -EIO;
+
+	PDBGG("fmw_sx, fmw_sy, fmw_length, fmw_height: %u %u %u %u",
+	      fmw_sx, fmw_sy, fmw_length, fmw_height);
+
+	return 0;
+}
+
+
+static int et61x251_init(struct et61x251_device* cam)
+{
+	struct et61x251_sensor* s = cam->sensor;
+	struct v4l2_control ctrl;
+	struct v4l2_queryctrl *qctrl;
+	struct v4l2_rect* rect;
+	u8 i = 0;
+	int err = 0;
+
+	if (!(cam->state & DEV_INITIALIZED)) {
+		init_waitqueue_head(&cam->open);
+		qctrl = s->qctrl;
+		rect = &(s->cropcap.defrect);
+		cam->compression.quality = ET61X251_COMPRESSION_QUALITY;
+	} else { /* use current values */
+		qctrl = s->_qctrl;
+		rect = &(s->_rect);
+	}
+
+	err += et61x251_set_scale(cam, rect->width / s->pix_format.width);
+	err += et61x251_set_crop(cam, rect);
+	if (err)
+		return err;
+
+	if (s->init) {
+		err = s->init(cam);
+		if (err) {
+			DBG(3, "Sensor initialization failed");
+			return err;
+		}
+	}
+
+	err += et61x251_set_compression(cam, &cam->compression);
+	err += et61x251_set_pix_format(cam, &s->pix_format);
+	if (s->set_pix_format)
+		err += s->set_pix_format(cam, &s->pix_format);
+	if (err)
+		return err;
+
+	if (s->pix_format.pixelformat == V4L2_PIX_FMT_ET61X251)
+		DBG(3, "Compressed video format is active, quality %d",
+		    cam->compression.quality);
+	else
+		DBG(3, "Uncompressed video format is active");
+
+	if (s->set_crop)
+		if ((err = s->set_crop(cam, rect))) {
+			DBG(3, "set_crop() failed");
+			return err;
+		}
+
+	if (s->set_ctrl) {
+		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+			if (s->qctrl[i].id != 0 &&
+			    !(s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)) {
+				ctrl.id = s->qctrl[i].id;
+				ctrl.value = qctrl[i].default_value;
+				err = s->set_ctrl(cam, &ctrl);
+				if (err) {
+					DBG(3, "Set %s control failed",
+					    s->qctrl[i].name);
+					return err;
+				}
+				DBG(3, "Image sensor supports '%s' control",
+				    s->qctrl[i].name);
+			}
+	}
+
+	if (!(cam->state & DEV_INITIALIZED)) {
+		init_MUTEX(&cam->fileop_sem);
+		spin_lock_init(&cam->queue_lock);
+		init_waitqueue_head(&cam->wait_frame);
+		init_waitqueue_head(&cam->wait_stream);
+		cam->nreadbuffers = 2;
+		memcpy(s->_qctrl, s->qctrl, sizeof(s->qctrl));
+		memcpy(&(s->_rect), &(s->cropcap.defrect),
+		       sizeof(struct v4l2_rect));
+		cam->state |= DEV_INITIALIZED;
+	}
+
+	DBG(2, "Initialization succeeded");
+	return 0;
+}
+
+
+static void et61x251_release_resources(struct et61x251_device* cam)
+{
+	down(&et61x251_sysfs_lock);
+
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
+	video_set_drvdata(cam->v4ldev, NULL);
+	video_unregister_device(cam->v4ldev);
+
+	up(&et61x251_sysfs_lock);
+
+	kfree(cam->control_buffer);
+}
+
+/*****************************************************************************/
+
+static int et61x251_open(struct inode* inode, struct file* filp)
+{
+	struct et61x251_device* cam;
+	int err = 0;
+
+	/*
+	   This is the only safe way to prevent race conditions with
+	   disconnect
+	*/
+	if (!down_read_trylock(&et61x251_disconnect))
+		return -ERESTARTSYS;
+
+	cam = video_get_drvdata(video_devdata(filp));
+
+	if (down_interruptible(&cam->dev_sem)) {
+		up_read(&et61x251_disconnect);
+		return -ERESTARTSYS;
+	}
+
+	if (cam->users) {
+		DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
+		if ((filp->f_flags & O_NONBLOCK) ||
+		    (filp->f_flags & O_NDELAY)) {
+			err = -EWOULDBLOCK;
+			goto out;
+		}
+		up(&cam->dev_sem);
+		err = wait_event_interruptible_exclusive(cam->open,
+		                                  cam->state & DEV_DISCONNECTED
+		                                         || !cam->users);
+		if (err) {
+			up_read(&et61x251_disconnect);
+			return err;
+		}
+		if (cam->state & DEV_DISCONNECTED) {
+			up_read(&et61x251_disconnect);
+			return -ENODEV;
+		}
+		down(&cam->dev_sem);
+	}
+
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		err = et61x251_init(cam);
+		if (err) {
+			DBG(1, "Initialization failed again. "
+			       "I will retry on next open().");
+			goto out;
+		}
+		cam->state &= ~DEV_MISCONFIGURED;
+	}
+
+	if ((err = et61x251_start_transfer(cam)))
+		goto out;
+
+	filp->private_data = cam;
+	cam->users++;
+	cam->io = IO_NONE;
+	cam->stream = STREAM_OFF;
+	cam->nbuffers = 0;
+	cam->frame_count = 0;
+	et61x251_empty_framequeues(cam);
+
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
+
+out:
+	up(&cam->dev_sem);
+	up_read(&et61x251_disconnect);
+	return err;
+}
+
+
+static int et61x251_release(struct inode* inode, struct file* filp)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+
+	down(&cam->dev_sem); /* prevent disconnect() to be called */
+
+	et61x251_stop_transfer(cam);
+
+	et61x251_release_buffers(cam);
+
+	if (cam->state & DEV_DISCONNECTED) {
+		et61x251_release_resources(cam);
+		up(&cam->dev_sem);
+		kfree(cam);
+		return 0;
+	}
+
+	cam->users--;
+	wake_up_interruptible_nr(&cam->open, 1);
+
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
+
+	up(&cam->dev_sem);
+
+	return 0;
+}
+
+
+static ssize_t
+et61x251_read(struct file* filp, char __user * buf,
+              size_t count, loff_t* f_pos)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+	struct et61x251_frame_t* f, * i;
+	unsigned long lock_flags;
+	int err = 0;
+
+	if (down_interruptible(&cam->fileop_sem))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		up(&cam->fileop_sem);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		up(&cam->fileop_sem);
+		return -EIO;
+	}
+
+	if (cam->io == IO_MMAP) {
+		DBG(3, "Close and open the device again to choose the read "
+		       "method");
+		up(&cam->fileop_sem);
+		return -EINVAL;
+	}
+
+	if (cam->io == IO_NONE) {
+		if (!et61x251_request_buffers(cam, cam->nreadbuffers,
+		                              IO_READ)) {
+			DBG(1, "read() failed, not enough memory");
+			up(&cam->fileop_sem);
+			return -ENOMEM;
+		}
+		cam->io = IO_READ;
+		cam->stream = STREAM_ON;
+	}
+
+	if (list_empty(&cam->inqueue)) {
+		if (!list_empty(&cam->outqueue))
+			et61x251_empty_framequeues(cam);
+		et61x251_queue_unusedframes(cam);
+	}
+
+	if (!count) {
+		up(&cam->fileop_sem);
+		return 0;
+	}
+
+	if (list_empty(&cam->outqueue)) {
+		if (filp->f_flags & O_NONBLOCK) {
+			up(&cam->fileop_sem);
+			return -EAGAIN;
+		}
+		err = wait_event_interruptible
+		      ( cam->wait_frame,
+		        (!list_empty(&cam->outqueue)) ||
+		        (cam->state & DEV_DISCONNECTED) ||
+			(cam->state & DEV_MISCONFIGURED) );
+		if (err) {
+			up(&cam->fileop_sem);
+			return err;
+		}
+		if (cam->state & DEV_DISCONNECTED) {
+			up(&cam->fileop_sem);
+			return -ENODEV;
+		}
+		if (cam->state & DEV_MISCONFIGURED) {
+			up(&cam->fileop_sem);
+			return -EIO;
+		}
+	}
+
+	f = list_entry(cam->outqueue.prev, struct et61x251_frame_t, frame);
+
+	if (count > f->buf.bytesused)
+		count = f->buf.bytesused;
+
+	if (copy_to_user(buf, f->bufmem, count)) {
+		err = -EFAULT;
+		goto exit;
+	}
+	*f_pos += count;
+
+exit:
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	list_for_each_entry(i, &cam->outqueue, frame)
+		i->state = F_UNUSED;
+	INIT_LIST_HEAD(&cam->outqueue);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	et61x251_queue_unusedframes(cam);
+
+	PDBGG("Frame #%lu, bytes read: %zu",
+	      (unsigned long)f->buf.index, count);
+
+	up(&cam->fileop_sem);
+
+	return err ? err : count;
+}
+
+
+static unsigned int et61x251_poll(struct file *filp, poll_table *wait)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+	struct et61x251_frame_t* f;
+	unsigned long lock_flags;
+	unsigned int mask = 0;
+
+	if (down_interruptible(&cam->fileop_sem))
+		return POLLERR;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		goto error;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		goto error;
+	}
+
+	if (cam->io == IO_NONE) {
+		if (!et61x251_request_buffers(cam, cam->nreadbuffers,
+		                              IO_READ)) {
+			DBG(1, "poll() failed, not enough memory");
+			goto error;
+		}
+		cam->io = IO_READ;
+		cam->stream = STREAM_ON;
+	}
+
+	if (cam->io == IO_READ) {
+		spin_lock_irqsave(&cam->queue_lock, lock_flags);
+		list_for_each_entry(f, &cam->outqueue, frame)
+			f->state = F_UNUSED;
+		INIT_LIST_HEAD(&cam->outqueue);
+		spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+		et61x251_queue_unusedframes(cam);
+	}
+
+	poll_wait(filp, &cam->wait_frame, wait);
+
+	if (!list_empty(&cam->outqueue))
+		mask |= POLLIN | POLLRDNORM;
+
+	up(&cam->fileop_sem);
+
+	return mask;
+
+error:
+	up(&cam->fileop_sem);
+	return POLLERR;
+}
+
+
+static void et61x251_vm_open(struct vm_area_struct* vma)
+{
+	struct et61x251_frame_t* f = vma->vm_private_data;
+	f->vma_use_count++;
+}
+
+
+static void et61x251_vm_close(struct vm_area_struct* vma)
+{
+	/* NOTE: buffers are not freed here */
+	struct et61x251_frame_t* f = vma->vm_private_data;
+	f->vma_use_count--;
+}
+
+
+static struct vm_operations_struct et61x251_vm_ops = {
+	.open = et61x251_vm_open,
+	.close = et61x251_vm_close,
+};
+
+
+static int et61x251_mmap(struct file* filp, struct vm_area_struct *vma)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+	unsigned long size = vma->vm_end - vma->vm_start,
+	              start = vma->vm_start;
+	void *pos;
+	u32 i;
+
+	if (down_interruptible(&cam->fileop_sem))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		up(&cam->fileop_sem);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		up(&cam->fileop_sem);
+		return -EIO;
+	}
+
+	if (cam->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) ||
+	    size != PAGE_ALIGN(cam->frame[0].buf.length)) {
+		up(&cam->fileop_sem);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++) {
+		if ((cam->frame[i].buf.m.offset>>PAGE_SHIFT) == vma->vm_pgoff)
+			break;
+	}
+	if (i == cam->nbuffers) {
+		up(&cam->fileop_sem);
+		return -EINVAL;
+	}
+
+	vma->vm_flags |= VM_IO;
+	vma->vm_flags |= VM_RESERVED;
+
+	pos = cam->frame[i].bufmem;
+	while (size > 0) { /* size is page-aligned */
+		if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
+			up(&cam->fileop_sem);
+			return -EAGAIN;
+		}
+		start += PAGE_SIZE;
+		pos += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	vma->vm_ops = &et61x251_vm_ops;
+	vma->vm_private_data = &cam->frame[i];
+
+	et61x251_vm_open(vma);
+
+	up(&cam->fileop_sem);
+
+	return 0;
+}
+
+/*****************************************************************************/
+
+static int
+et61x251_vidioc_querycap(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_capability cap = {
+		.driver = "et61x251",
+		.version = ET61X251_MODULE_VERSION_CODE,
+		.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+		                V4L2_CAP_STREAMING,
+	};
+
+	strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
+	if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
+		strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
+		        sizeof(cap.bus_info));
+
+	if (copy_to_user(arg, &cap, sizeof(cap)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_enuminput(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_input i;
+
+	if (copy_from_user(&i, arg, sizeof(i)))
+		return -EFAULT;
+
+	if (i.index)
+		return -EINVAL;
+
+	memset(&i, 0, sizeof(i));
+	strcpy(i.name, "Camera");
+
+	if (copy_to_user(arg, &i, sizeof(i)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_gs_input(struct et61x251_device* cam, void __user * arg)
+{
+	int index;
+
+	if (copy_from_user(&index, arg, sizeof(index)))
+		return -EFAULT;
+
+	if (index != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_query_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+	struct et61x251_sensor* s = cam->sensor;
+	struct v4l2_queryctrl qc;
+	u8 i;
+
+	if (copy_from_user(&qc, arg, sizeof(qc)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+		if (qc.id && qc.id == s->qctrl[i].id) {
+			memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
+			if (copy_to_user(arg, &qc, sizeof(qc)))
+				return -EFAULT;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+
+static int
+et61x251_vidioc_g_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+	struct et61x251_sensor* s = cam->sensor;
+	struct v4l2_control ctrl;
+	int err = 0;
+	u8 i;
+
+	if (!s->get_ctrl && !s->set_ctrl)
+		return -EINVAL;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+
+	if (!s->get_ctrl) {
+		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+			if (ctrl.id == s->qctrl[i].id) {
+				ctrl.value = s->_qctrl[i].default_value;
+				goto exit;
+			}
+		return -EINVAL;
+	} else
+		err = s->get_ctrl(cam, &ctrl);
+
+exit:
+	if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
+		return -EFAULT;
+
+	return err;
+}
+
+
+static int
+et61x251_vidioc_s_ctrl(struct et61x251_device* cam, void __user * arg)
+{
+	struct et61x251_sensor* s = cam->sensor;
+	struct v4l2_control ctrl;
+	u8 i;
+	int err = 0;
+
+	if (!s->set_ctrl)
+		return -EINVAL;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+		if (ctrl.id == s->qctrl[i].id) {
+			if (ctrl.value < s->qctrl[i].minimum ||
+			    ctrl.value > s->qctrl[i].maximum)
+				return -ERANGE;
+			ctrl.value -= ctrl.value % s->qctrl[i].step;
+			break;
+		}
+
+	if ((err = s->set_ctrl(cam, &ctrl)))
+		return err;
+
+	s->_qctrl[i].default_value = ctrl.value;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_cropcap(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
+
+	cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	cc->pixelaspect.numerator = 1;
+	cc->pixelaspect.denominator = 1;
+
+	if (copy_to_user(arg, cc, sizeof(*cc)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_g_crop(struct et61x251_device* cam, void __user * arg)
+{
+	struct et61x251_sensor* s = cam->sensor;
+	struct v4l2_crop crop = {
+		.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+	};
+
+	memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
+
+	if (copy_to_user(arg, &crop, sizeof(crop)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg)
+{
+	struct et61x251_sensor* s = cam->sensor;
+	struct v4l2_crop crop;
+	struct v4l2_rect* rect;
+	struct v4l2_rect* bounds = &(s->cropcap.bounds);
+	struct v4l2_pix_format* pix_format = &(s->pix_format);
+	u8 scale;
+	const enum et61x251_stream_state stream = cam->stream;
+	const u32 nbuffers = cam->nbuffers;
+	u32 i;
+	int err = 0;
+
+	if (copy_from_user(&crop, arg, sizeof(crop)))
+		return -EFAULT;
+
+	rect = &(crop.c);
+
+	if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (cam->module_param.force_munmap)
+		for (i = 0; i < cam->nbuffers; i++)
+			if (cam->frame[i].vma_use_count) {
+				DBG(3, "VIDIOC_S_CROP failed. "
+				       "Unmap the buffers first.");
+				return -EINVAL;
+			}
+
+	/* Preserve R,G or B origin */
+	rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L;
+	rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L;
+
+	if (rect->width < 4)
+		rect->width = 4;
+	if (rect->height < 4)
+		rect->height = 4;
+	if (rect->width > bounds->width)
+		rect->width = bounds->width;
+	if (rect->height > bounds->height)
+		rect->height = bounds->height;
+	if (rect->left < bounds->left)
+		rect->left = bounds->left;
+	if (rect->top < bounds->top)
+		rect->top = bounds->top;
+	if (rect->left + rect->width > bounds->left + bounds->width)
+		rect->left = bounds->left+bounds->width - rect->width;
+	if (rect->top + rect->height > bounds->top + bounds->height)
+		rect->top = bounds->top+bounds->height - rect->height;
+
+	rect->width &= ~3L;
+	rect->height &= ~3L;
+
+	if (ET61X251_PRESERVE_IMGSCALE) {
+		/* Calculate the actual scaling factor */
+		u32 a, b;
+		a = rect->width * rect->height;
+		b = pix_format->width * pix_format->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+	} else
+		scale = 1;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = et61x251_stream_interrupt(cam)))
+			return err;
+
+	if (copy_to_user(arg, &crop, sizeof(crop))) {
+		cam->stream = stream;
+		return -EFAULT;
+	}
+
+	if (cam->module_param.force_munmap || cam->io == IO_READ)
+		et61x251_release_buffers(cam);
+
+	err = et61x251_set_crop(cam, rect);
+	if (s->set_crop)
+		err += s->set_crop(cam, rect);
+	err += et61x251_set_scale(cam, scale);
+
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	s->pix_format.width = rect->width/scale;
+	s->pix_format.height = rect->height/scale;
+	memcpy(&(s->_rect), rect, sizeof(*rect));
+
+	if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
+	    nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -ENOMEM;
+	}
+
+	if (cam->io == IO_READ)
+		et61x251_empty_framequeues(cam);
+	else if (cam->module_param.force_munmap)
+		et61x251_requeue_outqueue(cam);
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_enum_fmt(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_fmtdesc fmtd;
+
+	if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
+		return -EFAULT;
+
+	if (fmtd.index == 0) {
+		strcpy(fmtd.description, "bayer rgb");
+		fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
+	} else if (fmtd.index == 1) {
+		strcpy(fmtd.description, "compressed");
+		fmtd.pixelformat = V4L2_PIX_FMT_ET61X251;
+		fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
+	} else
+		return -EINVAL;
+
+	fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
+
+	if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_g_fmt(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_format format;
+	struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
+
+	if (copy_from_user(&format, arg, sizeof(format)))
+		return -EFAULT;
+
+	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_ET61X251)
+	                     ? 0 : (pfmt->width * pfmt->priv) / 8;
+	pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
+	pfmt->field = V4L2_FIELD_NONE;
+	memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
+
+	if (copy_to_user(arg, &format, sizeof(format)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd,
+                          void __user * arg)
+{
+	struct et61x251_sensor* s = cam->sensor;
+	struct v4l2_format format;
+	struct v4l2_pix_format* pix;
+	struct v4l2_pix_format* pfmt = &(s->pix_format);
+	struct v4l2_rect* bounds = &(s->cropcap.bounds);
+	struct v4l2_rect rect;
+	u8 scale;
+	const enum et61x251_stream_state stream = cam->stream;
+	const u32 nbuffers = cam->nbuffers;
+	u32 i;
+	int err = 0;
+
+	if (copy_from_user(&format, arg, sizeof(format)))
+		return -EFAULT;
+
+	pix = &(format.fmt.pix);
+
+	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	memcpy(&rect, &(s->_rect), sizeof(rect));
+
+	{ /* calculate the actual scaling factor */
+		u32 a, b;
+		a = rect.width * rect.height;
+		b = pix->width * pix->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+	}
+
+	rect.width = scale * pix->width;
+	rect.height = scale * pix->height;
+
+	if (rect.width < 4)
+		rect.width = 4;
+	if (rect.height < 4)
+		rect.height = 4;
+	if (rect.width > bounds->left + bounds->width - rect.left)
+		rect.width = bounds->left + bounds->width - rect.left;
+	if (rect.height > bounds->top + bounds->height - rect.top)
+		rect.height = bounds->top + bounds->height - rect.top;
+
+	rect.width &= ~3L;
+	rect.height &= ~3L;
+
+	{ /* adjust the scaling factor */
+		u32 a, b;
+		a = rect.width * rect.height;
+		b = pix->width * pix->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : 2) : 1;
+	}
+
+	pix->width = rect.width / scale;
+	pix->height = rect.height / scale;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_ET61X251 &&
+	    pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
+		pix->pixelformat = pfmt->pixelformat;
+	pix->priv = pfmt->priv; /* bpp */
+	pix->colorspace = pfmt->colorspace;
+	pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_ET61X251)
+	                    ? 0 : (pix->width * pix->priv) / 8;
+	pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
+	pix->field = V4L2_FIELD_NONE;
+
+	if (cmd == VIDIOC_TRY_FMT) {
+		if (copy_to_user(arg, &format, sizeof(format)))
+			return -EFAULT;
+		return 0;
+	}
+
+	if (cam->module_param.force_munmap)
+		for (i = 0; i < cam->nbuffers; i++)
+			if (cam->frame[i].vma_use_count) {
+				DBG(3, "VIDIOC_S_FMT failed. "
+				       "Unmap the buffers first.");
+				return -EINVAL;
+			}
+
+	if (cam->stream == STREAM_ON)
+		if ((err = et61x251_stream_interrupt(cam)))
+			return err;
+
+	if (copy_to_user(arg, &format, sizeof(format))) {
+		cam->stream = stream;
+		return -EFAULT;
+	}
+
+	if (cam->module_param.force_munmap || cam->io == IO_READ)
+		et61x251_release_buffers(cam);
+
+	err += et61x251_set_pix_format(cam, pix);
+	err += et61x251_set_crop(cam, &rect);
+	if (s->set_pix_format)
+		err += s->set_pix_format(cam, pix);
+	if (s->set_crop)
+		err += s->set_crop(cam, &rect);
+	err += et61x251_set_scale(cam, scale);
+
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	memcpy(pfmt, pix, sizeof(*pix));
+	memcpy(&(s->_rect), &rect, sizeof(rect));
+
+	if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
+	    nbuffers != et61x251_request_buffers(cam, nbuffers, cam->io)) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -ENOMEM;
+	}
+
+	if (cam->io == IO_READ)
+		et61x251_empty_framequeues(cam);
+	else if (cam->module_param.force_munmap)
+		et61x251_requeue_outqueue(cam);
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_g_jpegcomp(struct et61x251_device* cam, void __user * arg)
+{
+	if (copy_to_user(arg, &cam->compression,
+	                 sizeof(cam->compression)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_s_jpegcomp(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_jpegcompression jc;
+	const enum et61x251_stream_state stream = cam->stream;
+	int err = 0;
+
+	if (copy_from_user(&jc, arg, sizeof(jc)))
+		return -EFAULT;
+
+	if (jc.quality != 0 && jc.quality != 1)
+		return -EINVAL;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = et61x251_stream_interrupt(cam)))
+			return err;
+
+	err += et61x251_set_compression(cam, &jc);
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
+		       "problems. To use the camera, close and open "
+		       "/dev/video%d again.", cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	cam->compression.quality = jc.quality;
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_reqbufs(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_requestbuffers rb;
+	u32 i;
+	int err;
+
+	if (copy_from_user(&rb, arg, sizeof(rb)))
+		return -EFAULT;
+
+	if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    rb.memory != V4L2_MEMORY_MMAP)
+		return -EINVAL;
+
+	if (cam->io == IO_READ) {
+		DBG(3, "Close and open the device again to choose the mmap "
+		       "I/O method");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++)
+		if (cam->frame[i].vma_use_count) {
+			DBG(3, "VIDIOC_REQBUFS failed. "
+			       "Previous buffers are still mapped.");
+			return -EINVAL;
+		}
+
+	if (cam->stream == STREAM_ON)
+		if ((err = et61x251_stream_interrupt(cam)))
+			return err;
+
+	et61x251_empty_framequeues(cam);
+
+	et61x251_release_buffers(cam);
+	if (rb.count)
+		rb.count = et61x251_request_buffers(cam, rb.count, IO_MMAP);
+
+	if (copy_to_user(arg, &rb, sizeof(rb))) {
+		et61x251_release_buffers(cam);
+		cam->io = IO_NONE;
+		return -EFAULT;
+	}
+
+	cam->io = rb.count ? IO_MMAP : IO_NONE;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_querybuf(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_buffer b;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
+
+	if (cam->frame[b.index].vma_use_count)
+		b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+	if (cam->frame[b.index].state == F_DONE)
+		b.flags |= V4L2_BUF_FLAG_DONE;
+	else if (cam->frame[b.index].state != F_UNUSED)
+		b.flags |= V4L2_BUF_FLAG_QUEUED;
+
+	if (copy_to_user(arg, &b, sizeof(b)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_qbuf(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_buffer b;
+	unsigned long lock_flags;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (cam->frame[b.index].state != F_UNUSED)
+		return -EINVAL;
+
+	cam->frame[b.index].state = F_QUEUED;
+
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	PDBGG("Frame #%lu queued", (unsigned long)b.index);
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_dqbuf(struct et61x251_device* cam, struct file* filp,
+                      void __user * arg)
+{
+	struct v4l2_buffer b;
+	struct et61x251_frame_t *f;
+	unsigned long lock_flags;
+	int err = 0;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
+		return -EINVAL;
+
+	if (list_empty(&cam->outqueue)) {
+		if (cam->stream == STREAM_OFF)
+			return -EINVAL;
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		err = wait_event_interruptible
+		      ( cam->wait_frame,
+		        (!list_empty(&cam->outqueue)) ||
+		        (cam->state & DEV_DISCONNECTED) ||
+		        (cam->state & DEV_MISCONFIGURED) );
+		if (err)
+			return err;
+		if (cam->state & DEV_DISCONNECTED)
+			return -ENODEV;
+		if (cam->state & DEV_MISCONFIGURED)
+			return -EIO;
+	}
+
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	f = list_entry(cam->outqueue.next, struct et61x251_frame_t, frame);
+	list_del(cam->outqueue.next);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	f->state = F_UNUSED;
+
+	memcpy(&b, &f->buf, sizeof(b));
+	if (f->vma_use_count)
+		b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+	if (copy_to_user(arg, &b, sizeof(b)))
+		return -EFAULT;
+
+	PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_streamon(struct et61x251_device* cam, void __user * arg)
+{
+	int type;
+
+	if (copy_from_user(&type, arg, sizeof(type)))
+		return -EFAULT;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (list_empty(&cam->inqueue))
+		return -EINVAL;
+
+	cam->stream = STREAM_ON;
+
+	DBG(3, "Stream on");
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_streamoff(struct et61x251_device* cam, void __user * arg)
+{
+	int type, err;
+
+	if (copy_from_user(&type, arg, sizeof(type)))
+		return -EFAULT;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = et61x251_stream_interrupt(cam)))
+			return err;
+
+	et61x251_empty_framequeues(cam);
+
+	DBG(3, "Stream off");
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_g_parm(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_streamparm sp;
+
+	if (copy_from_user(&sp, arg, sizeof(sp)))
+		return -EFAULT;
+
+	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp.parm.capture.extendedmode = 0;
+	sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+	if (copy_to_user(arg, &sp, sizeof(sp)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+et61x251_vidioc_s_parm(struct et61x251_device* cam, void __user * arg)
+{
+	struct v4l2_streamparm sp;
+
+	if (copy_from_user(&sp, arg, sizeof(sp)))
+		return -EFAULT;
+
+	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp.parm.capture.extendedmode = 0;
+
+	if (sp.parm.capture.readbuffers == 0)
+		sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+	if (sp.parm.capture.readbuffers > ET61X251_MAX_FRAMES)
+		sp.parm.capture.readbuffers = ET61X251_MAX_FRAMES;
+
+	if (copy_to_user(arg, &sp, sizeof(sp)))
+		return -EFAULT;
+
+	cam->nreadbuffers = sp.parm.capture.readbuffers;
+
+	return 0;
+}
+
+
+static int et61x251_ioctl_v4l2(struct inode* inode, struct file* filp,
+                               unsigned int cmd, void __user * arg)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+
+	switch (cmd) {
+
+	case VIDIOC_QUERYCAP:
+		return et61x251_vidioc_querycap(cam, arg);
+
+	case VIDIOC_ENUMINPUT:
+		return et61x251_vidioc_enuminput(cam, arg);
+
+	case VIDIOC_G_INPUT:
+	case VIDIOC_S_INPUT:
+		return et61x251_vidioc_gs_input(cam, arg);
+
+	case VIDIOC_QUERYCTRL:
+		return et61x251_vidioc_query_ctrl(cam, arg);
+
+	case VIDIOC_G_CTRL:
+		return et61x251_vidioc_g_ctrl(cam, arg);
+
+	case VIDIOC_S_CTRL_OLD:
+	case VIDIOC_S_CTRL:
+		return et61x251_vidioc_s_ctrl(cam, arg);
+
+	case VIDIOC_CROPCAP_OLD:
+	case VIDIOC_CROPCAP:
+		return et61x251_vidioc_cropcap(cam, arg);
+
+	case VIDIOC_G_CROP:
+		return et61x251_vidioc_g_crop(cam, arg);
+
+	case VIDIOC_S_CROP:
+		return et61x251_vidioc_s_crop(cam, arg);
+
+	case VIDIOC_ENUM_FMT:
+		return et61x251_vidioc_enum_fmt(cam, arg);
+
+	case VIDIOC_G_FMT:
+		return et61x251_vidioc_g_fmt(cam, arg);
+
+	case VIDIOC_TRY_FMT:
+	case VIDIOC_S_FMT:
+		return et61x251_vidioc_try_s_fmt(cam, cmd, arg);
+
+	case VIDIOC_G_JPEGCOMP:
+		return et61x251_vidioc_g_jpegcomp(cam, arg);
+
+	case VIDIOC_S_JPEGCOMP:
+		return et61x251_vidioc_s_jpegcomp(cam, arg);
+
+	case VIDIOC_REQBUFS:
+		return et61x251_vidioc_reqbufs(cam, arg);
+
+	case VIDIOC_QUERYBUF:
+		return et61x251_vidioc_querybuf(cam, arg);
+
+	case VIDIOC_QBUF:
+		return et61x251_vidioc_qbuf(cam, arg);
+
+	case VIDIOC_DQBUF:
+		return et61x251_vidioc_dqbuf(cam, filp, arg);
+
+	case VIDIOC_STREAMON:
+		return et61x251_vidioc_streamon(cam, arg);
+
+	case VIDIOC_STREAMOFF:
+		return et61x251_vidioc_streamoff(cam, arg);
+
+	case VIDIOC_G_PARM:
+		return et61x251_vidioc_g_parm(cam, arg);
+
+	case VIDIOC_S_PARM_OLD:
+	case VIDIOC_S_PARM:
+		return et61x251_vidioc_s_parm(cam, arg);
+
+	case VIDIOC_G_STD:
+	case VIDIOC_S_STD:
+	case VIDIOC_QUERYSTD:
+	case VIDIOC_ENUMSTD:
+	case VIDIOC_QUERYMENU:
+		return -EINVAL;
+
+	default:
+		return -EINVAL;
+
+	}
+}
+
+
+static int et61x251_ioctl(struct inode* inode, struct file* filp,
+                         unsigned int cmd, unsigned long arg)
+{
+	struct et61x251_device* cam = video_get_drvdata(video_devdata(filp));
+	int err = 0;
+
+	if (down_interruptible(&cam->fileop_sem))
+		return -ERESTARTSYS;
+
+	if (cam->state & DEV_DISCONNECTED) {
+		DBG(1, "Device not present");
+		up(&cam->fileop_sem);
+		return -ENODEV;
+	}
+
+	if (cam->state & DEV_MISCONFIGURED) {
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
+		up(&cam->fileop_sem);
+		return -EIO;
+	}
+
+	V4LDBG(3, "et61x251", cmd);
+
+	err = et61x251_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
+
+	up(&cam->fileop_sem);
+
+	return err;
+}
+
+
+static struct file_operations et61x251_fops = {
+	.owner = THIS_MODULE,
+	.open =    et61x251_open,
+	.release = et61x251_release,
+	.ioctl =   et61x251_ioctl,
+	.read =    et61x251_read,
+	.poll =    et61x251_poll,
+	.mmap =    et61x251_mmap,
+	.llseek =  no_llseek,
+};
+
+/*****************************************************************************/
+
+/* It exists a single interface only. We do not need to validate anything. */
+static int
+et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct et61x251_device* cam;
+	static unsigned int dev_nr = 0;
+	unsigned int i;
+	int err = 0;
+
+	if (!(cam = kzalloc(sizeof(struct et61x251_device), GFP_KERNEL)))
+		return -ENOMEM;
+
+	cam->usbdev = udev;
+
+	if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) {
+		DBG(1, "kmalloc() failed");
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	if (!(cam->v4ldev = video_device_alloc())) {
+		DBG(1, "video_device_alloc() failed");
+		err = -ENOMEM;
+		goto fail;
+	}
+
+	init_MUTEX(&cam->dev_sem);
+
+	DBG(2, "ET61X[12]51 PC Camera Controller detected "
+	       "(vid/pid 0x%04X/0x%04X)",id->idVendor, id->idProduct);
+
+	for  (i = 0; et61x251_sensor_table[i]; i++) {
+		err = et61x251_sensor_table[i](cam);
+		if (!err)
+			break;
+	}
+
+	if (!err && cam->sensor)
+		DBG(2, "%s image sensor detected", cam->sensor->name);
+	else {
+		DBG(1, "No supported image sensor detected");
+		err = -ENODEV;
+		goto fail;
+	}
+
+	if (et61x251_init(cam)) {
+		DBG(1, "Initialization failed. I will retry on open().");
+		cam->state |= DEV_MISCONFIGURED;
+	}
+
+	strcpy(cam->v4ldev->name, "ET61X[12]51 PC Camera");
+	cam->v4ldev->owner = THIS_MODULE;
+	cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
+	cam->v4ldev->hardware = 0;
+	cam->v4ldev->fops = &et61x251_fops;
+	cam->v4ldev->minor = video_nr[dev_nr];
+	cam->v4ldev->release = video_device_release;
+	video_set_drvdata(cam->v4ldev, cam);
+
+	down(&cam->dev_sem);
+
+	err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
+	                            video_nr[dev_nr]);
+	if (err) {
+		DBG(1, "V4L2 device registration failed");
+		if (err == -ENFILE && video_nr[dev_nr] == -1)
+			DBG(1, "Free /dev/videoX node not found");
+		video_nr[dev_nr] = -1;
+		dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
+		up(&cam->dev_sem);
+		goto fail;
+	}
+
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
+
+	cam->module_param.force_munmap = force_munmap[dev_nr];
+
+	dev_nr = (dev_nr < ET61X251_MAX_DEVICES-1) ? dev_nr+1 : 0;
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	et61x251_create_sysfs(cam);
+	DBG(2, "Optional device control through 'sysfs' interface ready");
+#endif
+
+	usb_set_intfdata(intf, cam);
+
+	up(&cam->dev_sem);
+
+	return 0;
+
+fail:
+	if (cam) {
+		kfree(cam->control_buffer);
+		if (cam->v4ldev)
+			video_device_release(cam->v4ldev);
+		kfree(cam);
+	}
+	return err;
+}
+
+
+static void et61x251_usb_disconnect(struct usb_interface* intf)
+{
+	struct et61x251_device* cam = usb_get_intfdata(intf);
+
+	if (!cam)
+		return;
+
+	down_write(&et61x251_disconnect);
+
+	down(&cam->dev_sem);
+
+	DBG(2, "Disconnecting %s...", cam->v4ldev->name);
+
+	wake_up_interruptible_all(&cam->open);
+
+	if (cam->users) {
+		DBG(2, "Device /dev/video%d is open! Deregistration and "
+		       "memory deallocation are deferred on close.",
+		    cam->v4ldev->minor);
+		cam->state |= DEV_MISCONFIGURED;
+		et61x251_stop_transfer(cam);
+		cam->state |= DEV_DISCONNECTED;
+		wake_up_interruptible(&cam->wait_frame);
+		wake_up_interruptible(&cam->wait_stream);
+	} else {
+		cam->state |= DEV_DISCONNECTED;
+		et61x251_release_resources(cam);
+	}
+
+	up(&cam->dev_sem);
+
+	if (!cam->users)
+		kfree(cam);
+
+	up_write(&et61x251_disconnect);
+}
+
+
+static struct usb_driver et61x251_usb_driver = {
+	.name =       "et61x251",
+	.id_table =   et61x251_id_table,
+	.probe =      et61x251_usb_probe,
+	.disconnect = et61x251_usb_disconnect,
+};
+
+/*****************************************************************************/
+
+static int __init et61x251_module_init(void)
+{
+	int err = 0;
+
+	KDBG(2, ET61X251_MODULE_NAME " v" ET61X251_MODULE_VERSION);
+	KDBG(3, ET61X251_MODULE_AUTHOR);
+
+	if ((err = usb_register(&et61x251_usb_driver)))
+		KDBG(1, "usb_register() failed");
+
+	return err;
+}
+
+
+static void __exit et61x251_module_exit(void)
+{
+	usb_deregister(&et61x251_usb_driver);
+}
+
+
+module_init(et61x251_module_init);
+module_exit(et61x251_module_exit);
diff --git a/drivers/usb/media/et61x251_sensor.h b/drivers/usb/media/et61x251_sensor.h
new file mode 100644
index 0000000..b9df910
--- /dev/null
+++ b/drivers/usb/media/et61x251_sensor.h
@@ -0,0 +1,115 @@
+/***************************************************************************
+ * API for image sensors connected to ET61X[12]51 PC Camera Controllers    *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#ifndef _ET61X251_SENSOR_H_
+#define _ET61X251_SENSOR_H_
+
+#include <linux/usb.h>
+#include <linux/videodev.h>
+#include <linux/device.h>
+#include <linux/stddef.h>
+#include <linux/errno.h>
+#include <asm/types.h>
+
+struct et61x251_device;
+struct et61x251_sensor;
+
+/*****************************************************************************/
+
+extern int et61x251_probe_tas5130d1b(struct et61x251_device* cam);
+
+#define ET61X251_SENSOR_TABLE                                                 \
+/* Weak detections must go at the end of the list */                          \
+static int (*et61x251_sensor_table[])(struct et61x251_device*) = {            \
+	&et61x251_probe_tas5130d1b,                                           \
+	NULL,                                                                 \
+};
+
+extern void
+et61x251_attach_sensor(struct et61x251_device* cam,
+                       struct et61x251_sensor* sensor);
+
+/*****************************************************************************/
+
+extern int et61x251_write_reg(struct et61x251_device*, u8 value, u16 index);
+extern int et61x251_read_reg(struct et61x251_device*, u16 index);
+extern int et61x251_i2c_write(struct et61x251_device*, u8 address, u8 value);
+extern int et61x251_i2c_read(struct et61x251_device*, u8 address);
+extern int et61x251_i2c_try_write(struct et61x251_device*,
+                                  struct et61x251_sensor*, u8 address,
+                                  u8 value);
+extern int et61x251_i2c_try_read(struct et61x251_device*,
+                                 struct et61x251_sensor*, u8 address);
+extern int et61x251_i2c_raw_write(struct et61x251_device*, u8 n, u8 data1,
+                                  u8 data2, u8 data3, u8 data4, u8 data5,
+                                  u8 data6, u8 data7, u8 data8, u8 address);
+
+/*****************************************************************************/
+
+enum et61x251_i2c_sysfs_ops {
+	ET61X251_I2C_READ = 0x01,
+	ET61X251_I2C_WRITE = 0x02,
+};
+
+enum et61x251_i2c_interface {
+	ET61X251_I2C_2WIRES,
+	ET61X251_I2C_3WIRES,
+};
+
+/* Repeat start condition when RSTA is high */
+enum et61x251_i2c_rsta {
+	ET61X251_I2C_RSTA_STOP = 0x00, /* stop then start */
+	ET61X251_I2C_RSTA_REPEAT = 0x01, /* repeat start */
+};
+
+#define ET61X251_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
+
+struct et61x251_sensor {
+	char name[32];
+
+	enum et61x251_i2c_sysfs_ops sysfs_ops;
+
+	enum et61x251_i2c_interface interface;
+	u8 i2c_slave_id;
+	enum et61x251_i2c_rsta rsta;
+	struct v4l2_rect active_pixel; /* left and top define FVSX and FVSY */
+
+	struct v4l2_queryctrl qctrl[ET61X251_MAX_CTRLS];
+	struct v4l2_cropcap cropcap;
+	struct v4l2_pix_format pix_format;
+
+	int (*init)(struct et61x251_device* cam);
+	int (*get_ctrl)(struct et61x251_device* cam,
+	                struct v4l2_control* ctrl);
+	int (*set_ctrl)(struct et61x251_device* cam,
+	                const struct v4l2_control* ctrl);
+	int (*set_crop)(struct et61x251_device* cam,
+	                const struct v4l2_rect* rect);
+	int (*set_pix_format)(struct et61x251_device* cam,
+	                      const struct v4l2_pix_format* pix);
+
+	const struct usb_device* usbdev;
+
+	/* Private */
+	struct v4l2_queryctrl _qctrl[ET61X251_MAX_CTRLS];
+	struct v4l2_rect _rect;
+};
+
+#endif /* _ET61X251_SENSOR_H_ */
diff --git a/drivers/usb/media/et61x251_tas5130d1b.c b/drivers/usb/media/et61x251_tas5130d1b.c
new file mode 100644
index 0000000..65f1ae9
--- /dev/null
+++ b/drivers/usb/media/et61x251_tas5130d1b.c
@@ -0,0 +1,137 @@
+/***************************************************************************
+ * Plug-in for TAS5130D1B image sensor connected to the ET61X[12]51        *
+ * PC Camera Controllers                                                   *
+ *                                                                         *
+ * Copyright (C) 2006 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include "et61x251_sensor.h"
+
+
+static int tas5130d1b_init(struct et61x251_device* cam)
+{
+	int err = 0;
+
+	err += et61x251_write_reg(cam, 0x14, 0x01);
+	err += et61x251_write_reg(cam, 0x1b, 0x02);
+	err += et61x251_write_reg(cam, 0x02, 0x12);
+	err += et61x251_write_reg(cam, 0x0e, 0x60);
+	err += et61x251_write_reg(cam, 0x80, 0x61);
+	err += et61x251_write_reg(cam, 0xf0, 0x62);
+	err += et61x251_write_reg(cam, 0x03, 0x63);
+	err += et61x251_write_reg(cam, 0x14, 0x64);
+	err += et61x251_write_reg(cam, 0xf4, 0x65);
+	err += et61x251_write_reg(cam, 0x01, 0x66);
+	err += et61x251_write_reg(cam, 0x05, 0x67);
+	err += et61x251_write_reg(cam, 0x8f, 0x68);
+	err += et61x251_write_reg(cam, 0x0f, 0x8d);
+	err += et61x251_write_reg(cam, 0x08, 0x8e);
+
+	return err;
+}
+
+
+static int tas5130d1b_set_ctrl(struct et61x251_device* cam,
+                               const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_GAIN:
+		err += et61x251_i2c_raw_write(cam, 2, 0x20,
+		                              0xf6-ctrl->value, 0, 0, 0,
+		                              0, 0, 0, 0);
+		break;
+	case V4L2_CID_EXPOSURE:
+		err += et61x251_i2c_raw_write(cam, 2, 0x40,
+		                              0x47-ctrl->value, 0, 0, 0,
+		                              0, 0, 0, 0);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return err ? -EIO : 0;
+}
+
+
+static struct et61x251_sensor tas5130d1b = {
+	.name = "TAS5130D1B",
+	.interface = ET61X251_I2C_3WIRES,
+	.rsta = ET61X251_I2C_RSTA_STOP,
+	.active_pixel = {
+		.left = 106,
+		.top = 13,
+	},
+	.init = &tas5130d1b_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0xf6,
+			.step = 0x02,
+			.default_value = 0x0d,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x00,
+			.maximum = 0x47,
+			.step = 0x01,
+			.default_value = 0x23,
+			.flags = 0,
+		},
+	},
+	.set_ctrl = &tas5130d1b_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+};
+
+
+int et61x251_probe_tas5130d1b(struct et61x251_device* cam)
+{
+	/* This sensor has no identifiers, so let's attach it anyway */
+	et61x251_attach_sensor(cam, &tas5130d1b);
+
+	/* Sensor detection is based on USB pid/vid */
+	if (le16_to_cpu(tas5130d1b.usbdev->descriptor.idProduct) != 0x6251)
+		return -ENODEV;
+
+	return 0;
+}
diff --git a/drivers/usb/media/ov511.c b/drivers/usb/media/ov511.c
index 8af665b..51e9cc0 100644
--- a/drivers/usb/media/ov511.c
+++ b/drivers/usb/media/ov511.c
@@ -204,22 +204,10 @@
 
 static struct usb_driver ov511_driver;
 
-static struct ov51x_decomp_ops *ov511_decomp_ops;
-static struct ov51x_decomp_ops *ov511_mmx_decomp_ops;
-static struct ov51x_decomp_ops *ov518_decomp_ops;
-static struct ov51x_decomp_ops *ov518_mmx_decomp_ops;
-
 /* Number of times to retry a failed I2C transaction. Increase this if you
  * are getting "Failed to read sensor ID..." */
 static const int i2c_detect_tries = 5;
 
-/* MMX support is present in kernel and CPU. Checked upon decomp module load. */
-#if defined(__i386__) || defined(__x86_64__)
-#define ov51x_mmx_available (cpu_has_mmx)
-#else
-#define ov51x_mmx_available (0)
-#endif
-
 static struct usb_device_id device_table [] = {
 	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511) },
 	{ USB_DEVICE(VEND_OMNIVISION, PROD_OV511PLUS) },
@@ -3012,93 +3000,18 @@
  *
  **********************************************************************/
 
-/* Chooses a decompression module, locks it, and sets ov->decomp_ops
- * accordingly. Returns -ENXIO if decompressor is not available, otherwise
- * returns 0 if no other error.
- */
 static int
 request_decompressor(struct usb_ov511 *ov)
 {
-	if (!ov)
-		return -ENODEV;
-
-	if (ov->decomp_ops) {
-		err("ERROR: Decompressor already requested!");
-		return -EINVAL;
-	}
-
-	lock_kernel();
-
-	/* Try to get MMX, and fall back on no-MMX if necessary */
-	if (ov->bclass == BCL_OV511) {
-		if (ov511_mmx_decomp_ops) {
-			PDEBUG(3, "Using OV511 MMX decompressor");
-			ov->decomp_ops = ov511_mmx_decomp_ops;
-		} else if (ov511_decomp_ops) {
-			PDEBUG(3, "Using OV511 decompressor");
-			ov->decomp_ops = ov511_decomp_ops;
-		} else {
-			err("No decompressor available");
-		}
-	} else if (ov->bclass == BCL_OV518) {
-		if (ov518_mmx_decomp_ops) {
-			PDEBUG(3, "Using OV518 MMX decompressor");
-			ov->decomp_ops = ov518_mmx_decomp_ops;
-		} else if (ov518_decomp_ops) {
-			PDEBUG(3, "Using OV518 decompressor");
-			ov->decomp_ops = ov518_decomp_ops;
-		} else {
-			err("No decompressor available");
-		}
+	if (ov->bclass == BCL_OV511 || ov->bclass == BCL_OV518) {
+		err("No decompressor available");
 	} else {
 		err("Unknown bridge");
 	}
 
-	if (!ov->decomp_ops)
-		goto nosys;
-
-	if (!ov->decomp_ops->owner) {
-		ov->decomp_ops = NULL;
-		goto nosys;
-	}
-	
-	if (!try_module_get(ov->decomp_ops->owner))
-		goto nosys;
-
-	unlock_kernel();
-	return 0;
-
- nosys:
-	unlock_kernel();
 	return -ENOSYS;
 }
 
-/* Unlocks decompression module and nulls ov->decomp_ops. Safe to call even
- * if ov->decomp_ops is NULL.
- */
-static void
-release_decompressor(struct usb_ov511 *ov)
-{
-	int released = 0;	/* Did we actually do anything? */
-
-	if (!ov)
-		return;
-
-	lock_kernel();
-
-	if (ov->decomp_ops) {
-		module_put(ov->decomp_ops->owner);
-		released = 1;
-	}
-
-	ov->decomp_ops = NULL;
-
-	unlock_kernel();
-
-	if (released)
-		PDEBUG(3, "Decompressor released");
-}
-
 static void
 decompress(struct usb_ov511 *ov, struct ov511_frame *frame,
 	   unsigned char *pIn0, unsigned char *pOut0)
@@ -3107,31 +3020,6 @@
 		if (request_decompressor(ov))
 			return;
 
-	PDEBUG(4, "Decompressing %d bytes", frame->bytes_recvd);
-
-	if (frame->format == VIDEO_PALETTE_GREY
-	    && ov->decomp_ops->decomp_400) {
-		int ret = ov->decomp_ops->decomp_400(
-			pIn0,
-			pOut0,
-			frame->compbuf,
-			frame->rawwidth,
-			frame->rawheight,
-			frame->bytes_recvd);
-		PDEBUG(4, "DEBUG: decomp_400 returned %d", ret);
-	} else if (frame->format != VIDEO_PALETTE_GREY
-		   && ov->decomp_ops->decomp_420) {
-		int ret = ov->decomp_ops->decomp_420(
-			pIn0,
-			pOut0,
-			frame->compbuf,
-			frame->rawwidth,
-			frame->rawheight,
-			frame->bytes_recvd);
-		PDEBUG(4, "DEBUG: decomp_420 returned %d", ret);
-	} else {
-		err("Decompressor does not support this format");
-	}
 }
 
 /**********************************************************************
@@ -4087,8 +3975,6 @@
 	ov->user--;
 	ov51x_stop_isoc(ov);
 
-	release_decompressor(ov);
-
 	if (ov->led_policy == LED_AUTO)
 		ov51x_led_control(ov, 0);
 
@@ -6021,82 +5907,6 @@
  *
  ***************************************************************************/
 
-/* Returns 0 for success */
-int
-ov511_register_decomp_module(int ver, struct ov51x_decomp_ops *ops, int ov518,
-			     int mmx)
-{
-	if (ver != DECOMP_INTERFACE_VER) {
-		err("Decompression module has incompatible");
-		err("interface version %d", ver);
-		err("Interface version %d is required", DECOMP_INTERFACE_VER);
-		return -EINVAL;
-	}
-
-	if (!ops)
-		return -EFAULT;
-
-	if (mmx && !ov51x_mmx_available) {
-		err("MMX not available on this system or kernel");
-		return -EINVAL;
-	}
-
-	lock_kernel();
-
-	if (ov518) {
-		if (mmx) {
-			if (ov518_mmx_decomp_ops)
-				goto err_in_use;
-			else
-				ov518_mmx_decomp_ops = ops;
-		} else {
-			if (ov518_decomp_ops)
-				goto err_in_use;
-			else
-				ov518_decomp_ops = ops;
-		}
-	} else {
-		if (mmx) {
-			if (ov511_mmx_decomp_ops)
-				goto err_in_use;
-			else
-				ov511_mmx_decomp_ops = ops;
-		} else {
-			if (ov511_decomp_ops)
-				goto err_in_use;
-			else
-				ov511_decomp_ops = ops;
-		}
-	}
-
-	unlock_kernel();
-	return 0;
-
-err_in_use:
-	unlock_kernel();
-	return -EBUSY;
-}
-
-void
-ov511_deregister_decomp_module(int ov518, int mmx)
-{
-	lock_kernel();
-
-	if (ov518) {
-		if (mmx)
-			ov518_mmx_decomp_ops = NULL;
-		else
-			ov518_decomp_ops = NULL;
-	} else {
-		if (mmx)
-			ov511_mmx_decomp_ops = NULL;
-		else
-			ov511_decomp_ops = NULL;
-	}
-
-	unlock_kernel();
-}
-
 static int __init
 usb_ov511_init(void)
 {
@@ -6123,5 +5933,3 @@
 module_init(usb_ov511_init);
 module_exit(usb_ov511_exit);
 
-EXPORT_SYMBOL(ov511_register_decomp_module);
-EXPORT_SYMBOL(ov511_deregister_decomp_module);
diff --git a/drivers/usb/media/pwc/pwc-ctrl.c b/drivers/usb/media/pwc/pwc-ctrl.c
index 359c4b2..3ebb6e9 100644
--- a/drivers/usb/media/pwc/pwc-ctrl.c
+++ b/drivers/usb/media/pwc/pwc-ctrl.c
@@ -1152,45 +1152,6 @@
  /* End of Add-Ons                                    */
  /* ************************************************* */
 
-/* Linux 2.5.something and 2.6 pass direct pointers to arguments of
-   ioctl() calls. With 2.4, you have to do tedious copy_from_user()
-   and copy_to_user() calls. With these macros we circumvent this,
-   and let me maintain only one source file. The functionality is
-   exactly the same otherwise.
- */   
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
-
-/* define local variable for arg */
-#define ARG_DEF(ARG_type, ARG_name)\
-	ARG_type *ARG_name = arg;
-/* copy arg to local variable */	
-#define ARG_IN(ARG_name) /* nothing */
-/* argument itself (referenced) */
-#define ARGR(ARG_name) (*ARG_name)
-/* argument address */
-#define ARGA(ARG_name) ARG_name
-/* copy local variable to arg */
-#define ARG_OUT(ARG_name) /* nothing */
-
-#else
-
-#define ARG_DEF(ARG_type, ARG_name)\
-	ARG_type ARG_name;
-#define ARG_IN(ARG_name)\
-	if (copy_from_user(&ARG_name, arg, sizeof(ARG_name))) {\
-		ret = -EFAULT;\
-		break;\
-	}
-#define ARGR(ARG_name) ARG_name
-#define ARGA(ARG_name) &ARG_name
-#define ARG_OUT(ARG_name)\
-	if (copy_to_user(arg, &ARG_name, sizeof(ARG_name))) {\
-		ret = -EFAULT;\
-		break;\
-	}
-
-#endif
 
 int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 {
@@ -1220,243 +1181,206 @@
 	
 	case VIDIOCPWCSCQUAL:
 	{	
-		ARG_DEF(int, qual)
+		int *qual = arg;
 
-		ARG_IN(qual)
-		if (ARGR(qual) < 0 || ARGR(qual) > 3)
+		if (*qual < 0 || *qual > 3)
 			ret = -EINVAL;
 		else
-			ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
+			ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, *qual, pdev->vsnapshot);
 		if (ret >= 0)
-			pdev->vcompression = ARGR(qual);
+			pdev->vcompression = *qual;
 		break;
 	}
 	
 	case VIDIOCPWCGCQUAL:
 	{
-		ARG_DEF(int, qual)
-		
-		ARGR(qual) = pdev->vcompression;
-		ARG_OUT(qual)
+		int *qual = arg;
+		*qual = pdev->vcompression;
 		break;
 	}
 	
 	case VIDIOCPWCPROBE:
 	{
-		ARG_DEF(struct pwc_probe, probe)
-		
-		strcpy(ARGR(probe).name, pdev->vdev->name);
-		ARGR(probe).type = pdev->type;
-		ARG_OUT(probe)
+		struct pwc_probe *probe = arg;
+		strcpy(probe->name, pdev->vdev->name);
+		probe->type = pdev->type;
 		break;
 	}
 
 	case VIDIOCPWCGSERIAL:
 	{
-		ARG_DEF(struct pwc_serial, serial)
-		
-		strcpy(ARGR(serial).serial, pdev->serial);
-		ARG_OUT(serial)
+		struct pwc_serial *serial = arg;
+		strcpy(serial->serial, pdev->serial);
 		break;
 	}
 
 	case VIDIOCPWCSAGC:
 	{
-		ARG_DEF(int, agc)
-
-		ARG_IN(agc)
-		if (pwc_set_agc(pdev, ARGR(agc) < 0 ? 1 : 0, ARGR(agc)))
+		int *agc = arg;
+		if (pwc_set_agc(pdev, *agc < 0 ? 1 : 0, *agc))
 			ret = -EINVAL;
 		break;
 	}
 	
 	case VIDIOCPWCGAGC:
 	{
-		ARG_DEF(int, agc)
+		int *agc = arg;
 		
-		if (pwc_get_agc(pdev, ARGA(agc)))
+		if (pwc_get_agc(pdev, agc))
 			ret = -EINVAL;
-		ARG_OUT(agc)
 		break;
 	}
 	
 	case VIDIOCPWCSSHUTTER:
 	{
-		ARG_DEF(int, shutter_speed)
-
-		ARG_IN(shutter_speed)
-		ret = pwc_set_shutter_speed(pdev, ARGR(shutter_speed) < 0 ? 1 : 0, ARGR(shutter_speed));
+		int *shutter_speed = arg;
+		ret = pwc_set_shutter_speed(pdev, *shutter_speed < 0 ? 1 : 0, *shutter_speed);
 		break;
 	}
 	
         case VIDIOCPWCSAWB:
 	{
-		ARG_DEF(struct pwc_whitebalance, wb)
+		struct pwc_whitebalance *wb = arg;
 		
-		ARG_IN(wb)
-		ret = pwc_set_awb(pdev, ARGR(wb).mode);
-		if (ret >= 0 && ARGR(wb).mode == PWC_WB_MANUAL) {
-			pwc_set_red_gain(pdev, ARGR(wb).manual_red);
-			pwc_set_blue_gain(pdev, ARGR(wb).manual_blue);
+		ret = pwc_set_awb(pdev, wb->mode);
+		if (ret >= 0 && wb->mode == PWC_WB_MANUAL) {
+			pwc_set_red_gain(pdev, wb->manual_red);
+			pwc_set_blue_gain(pdev, wb->manual_blue);
 		}
 		break;
 	}
 
 	case VIDIOCPWCGAWB:
 	{
-		ARG_DEF(struct pwc_whitebalance, wb)
+		struct pwc_whitebalance *wb = arg;
 
-		memset(ARGA(wb), 0, sizeof(struct pwc_whitebalance));
-		ARGR(wb).mode = pwc_get_awb(pdev);
-		if (ARGR(wb).mode < 0)
+		memset(wb, 0, sizeof(struct pwc_whitebalance));
+		wb->mode = pwc_get_awb(pdev);
+		if (wb->mode < 0)
 			ret = -EINVAL;
 		else {
-			if (ARGR(wb).mode == PWC_WB_MANUAL) {
-				ret = pwc_get_red_gain(pdev, &ARGR(wb).manual_red);
+			if (wb->mode == PWC_WB_MANUAL) {
+				ret = pwc_get_red_gain(pdev, &wb->manual_red);
 				if (ret < 0)
 					break;
-				ret = pwc_get_blue_gain(pdev, &ARGR(wb).manual_blue);
+				ret = pwc_get_blue_gain(pdev, &wb->manual_blue);
 				if (ret < 0)
 					break;
 			}
-			if (ARGR(wb).mode == PWC_WB_AUTO) {
-				ret = pwc_read_red_gain(pdev, &ARGR(wb).read_red);
+			if (wb->mode == PWC_WB_AUTO) {
+				ret = pwc_read_red_gain(pdev, &wb->read_red);
 				if (ret < 0)
 					break;
- 				ret =pwc_read_blue_gain(pdev, &ARGR(wb).read_blue);
+ 				ret = pwc_read_blue_gain(pdev, &wb->read_blue);
  				if (ret < 0)
  					break;
 			}
 		}
-		ARG_OUT(wb)
 		break;
 	}
 	
 	case VIDIOCPWCSAWBSPEED:
 	{
-		ARG_DEF(struct pwc_wb_speed, wbs)
+		struct pwc_wb_speed *wbs = arg;
 		
-		if (ARGR(wbs).control_speed > 0) {
-			ret = pwc_set_wb_speed(pdev, ARGR(wbs).control_speed);
+		if (wbs->control_speed > 0) {
+			ret = pwc_set_wb_speed(pdev, wbs->control_speed);
 		}
-		if (ARGR(wbs).control_delay > 0) {
-			ret = pwc_set_wb_delay(pdev, ARGR(wbs).control_delay);
+		if (wbs->control_delay > 0) {
+			ret = pwc_set_wb_delay(pdev, wbs->control_delay);
 		}
 		break;
 	}
 	
 	case VIDIOCPWCGAWBSPEED:
 	{
-		ARG_DEF(struct pwc_wb_speed, wbs)
+		struct pwc_wb_speed *wbs = arg;
 		
-		ret = pwc_get_wb_speed(pdev, &ARGR(wbs).control_speed);
+		ret = pwc_get_wb_speed(pdev, &wbs->control_speed);
 		if (ret < 0)
 			break;
-		ret = pwc_get_wb_delay(pdev, &ARGR(wbs).control_delay);
+		ret = pwc_get_wb_delay(pdev, &wbs->control_delay);
 		if (ret < 0)
 			break;
-		ARG_OUT(wbs)
 		break;
 	}
 
         case VIDIOCPWCSLED:
 	{
-		ARG_DEF(struct pwc_leds, leds)
-
-		ARG_IN(leds)
-		ret = pwc_set_leds(pdev, ARGR(leds).led_on, ARGR(leds).led_off);
+		struct pwc_leds *leds = arg;
+		ret = pwc_set_leds(pdev, leds->led_on, leds->led_off);
 	    	break;
 	}
 
 
 	case VIDIOCPWCGLED:
 	{
-		ARG_DEF(struct pwc_leds, leds)
-		
-		ret = pwc_get_leds(pdev, &ARGR(leds).led_on, &ARGR(leds).led_off);
-		ARG_OUT(leds)
+		struct pwc_leds *leds = arg;
+		ret = pwc_get_leds(pdev, &leds->led_on, &leds->led_off);
 		break;
 	}
 
 	case VIDIOCPWCSCONTOUR:
 	{
-		ARG_DEF(int, contour)
-
-		ARG_IN(contour)
-		ret = pwc_set_contour(pdev, ARGR(contour));
+		int *contour = arg;
+		ret = pwc_set_contour(pdev, *contour);
 		break;
 	}
 			
 	case VIDIOCPWCGCONTOUR:
 	{
-		ARG_DEF(int, contour)
-		
-		ret = pwc_get_contour(pdev, ARGA(contour));
-		ARG_OUT(contour)
+		int *contour = arg;
+		ret = pwc_get_contour(pdev, contour);
 		break;
 	}
 	
 	case VIDIOCPWCSBACKLIGHT:
 	{
-		ARG_DEF(int, backlight)
-		
-		ARG_IN(backlight)
-		ret = pwc_set_backlight(pdev, ARGR(backlight));
+		int *backlight = arg;
+		ret = pwc_set_backlight(pdev, *backlight);
 		break;
 	}
 
 	case VIDIOCPWCGBACKLIGHT:
 	{
-		ARG_DEF(int, backlight)
-		
-		ret = pwc_get_backlight(pdev, ARGA(backlight));
-		ARG_OUT(backlight)
+		int *backlight = arg;
+		ret = pwc_get_backlight(pdev, backlight);
 		break;
 	}
 	
 	case VIDIOCPWCSFLICKER:
 	{
-		ARG_DEF(int, flicker)
-		
-		ARG_IN(flicker)
-		ret = pwc_set_flicker(pdev, ARGR(flicker));
+		int *flicker = arg;
+		ret = pwc_set_flicker(pdev, *flicker);
 		break;
 	}
 
 	case VIDIOCPWCGFLICKER:
 	{
-		ARG_DEF(int, flicker)
-		
-		ret = pwc_get_flicker(pdev, ARGA(flicker));
-		ARG_OUT(flicker)
+		int *flicker = arg;
+		ret = pwc_get_flicker(pdev, flicker);
 		break;
 	}
 	
 	case VIDIOCPWCSDYNNOISE:
 	{
-		ARG_DEF(int, dynnoise)
-		
-		ARG_IN(dynnoise)
-		ret = pwc_set_dynamic_noise(pdev, ARGR(dynnoise));
+		int *dynnoise = arg;
+		ret = pwc_set_dynamic_noise(pdev, *dynnoise);
 		break;
 	}
 	
 	case VIDIOCPWCGDYNNOISE:
 	{
-		ARG_DEF(int, dynnoise)
-
-		ret = pwc_get_dynamic_noise(pdev, ARGA(dynnoise));
-		ARG_OUT(dynnoise);
+		int *dynnoise = arg;
+		ret = pwc_get_dynamic_noise(pdev, dynnoise);
 		break;
 	}
 
 	case VIDIOCPWCGREALSIZE:
 	{
-		ARG_DEF(struct pwc_imagesize, size)
-		
-		ARGR(size).width = pdev->image.x;
-		ARGR(size).height = pdev->image.y;
-		ARG_OUT(size)
+		struct pwc_imagesize *size = arg;
+		size->width = pdev->image.x;
+		size->height = pdev->image.y;
 		break;
  	}
  	
@@ -1464,10 +1388,9 @@
  	{
  		if (pdev->features & FEATURE_MOTOR_PANTILT)
  		{
-	 		ARG_DEF(int, flags)
+	 		int *flags = arg;
 
- 			ARG_IN(flags)
-			ret = pwc_mpt_reset(pdev, ARGR(flags));
+			ret = pwc_mpt_reset(pdev, *flags);
  			if (ret >= 0)
  			{
  				pdev->pan_angle = 0;
@@ -1485,10 +1408,8 @@
  	{
  		if (pdev->features & FEATURE_MOTOR_PANTILT)
  		{
- 			ARG_DEF(struct pwc_mpt_range, range)
- 			
- 			ARGR(range) = pdev->angle_range;
- 			ARG_OUT(range)
+ 			struct pwc_mpt_range *range = arg;
+ 			*range = pdev->angle_range;
  		}
  		else
  		{	
@@ -1503,21 +1424,19 @@
  		
  		if (pdev->features & FEATURE_MOTOR_PANTILT)
  		{
-	 		ARG_DEF(struct pwc_mpt_angles, angles)
-
-	 		ARG_IN(angles)
+	 		struct pwc_mpt_angles *angles = arg;
 			/* The camera can only set relative angles, so
 			   do some calculations when getting an absolute angle .
 			 */
-			if (ARGR(angles).absolute)
+			if (angles->absolute)
 			{
- 				new_pan  = ARGR(angles).pan; 
- 				new_tilt = ARGR(angles).tilt;
+ 				new_pan  = angles->pan;
+ 				new_tilt = angles->tilt;
  			}
  			else
  			{
- 				new_pan  = pdev->pan_angle  + ARGR(angles).pan;
- 				new_tilt = pdev->tilt_angle + ARGR(angles).tilt;
+ 				new_pan  = pdev->pan_angle  + angles->pan;
+ 				new_tilt = pdev->tilt_angle + angles->tilt;
 			}
 			/* check absolute ranges */
 			if (new_pan  < pdev->angle_range.pan_min  ||
@@ -1560,12 +1479,11 @@
  		
  		if (pdev->features & FEATURE_MOTOR_PANTILT)
  		{
-	 		ARG_DEF(struct pwc_mpt_angles, angles)
+	 		struct pwc_mpt_angles *angles = arg;
 
- 			ARGR(angles).absolute = 1;
- 			ARGR(angles).pan  = pdev->pan_angle;
- 			ARGR(angles).tilt = pdev->tilt_angle;
- 			ARG_OUT(angles)
+ 			angles->absolute = 1;
+ 			angles->pan  = pdev->pan_angle;
+ 			angles->tilt = pdev->tilt_angle;
  		}
  		else
  		{
@@ -1578,10 +1496,8 @@
  	{
  		if (pdev->features & FEATURE_MOTOR_PANTILT)
  		{
- 			ARG_DEF(struct pwc_mpt_status, status)
- 			
- 			ret = pwc_mpt_get_status(pdev, ARGA(status));
- 			ARG_OUT(status)
+ 			struct pwc_mpt_status *status = arg;
+ 			ret = pwc_mpt_get_status(pdev, status);
  		}
  		else
  		{
@@ -1592,24 +1508,22 @@
 
 	case VIDIOCPWCGVIDCMD:
 	{
-		ARG_DEF(struct pwc_video_command, cmd);
+		struct pwc_video_command *cmd = arg;
 		
-                ARGR(cmd).type = pdev->type;
-		ARGR(cmd).release = pdev->release;
-		ARGR(cmd).command_len = pdev->cmd_len;
-		memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
-		ARGR(cmd).bandlength = pdev->vbandlength;
-		ARGR(cmd).frame_size = pdev->frame_size;
-		ARG_OUT(cmd)
+                cmd->type = pdev->type;
+		cmd->release = pdev->release;
+		cmd->command_len = pdev->cmd_len;
+		memcpy(&cmd->command_buf, pdev->cmd_buf, pdev->cmd_len);
+		cmd->bandlength = pdev->vbandlength;
+		cmd->frame_size = pdev->frame_size;
 		break;
 	}
        /*
 	case VIDIOCPWCGVIDTABLE:
 	{
-		ARG_DEF(struct pwc_table_init_buffer, table);
-		ARGR(table).len = pdev->cmd_len;
-		memcpy(&ARGR(table).buffer, pdev->decompress_data, pdev->decompressor->table_size);
-		ARG_OUT(table)
+		struct pwc_table_init_buffer *table = arg;
+		table->len = pdev->cmd_len;
+		memcpy(&table->buffer, pdev->decompress_data, pdev->decompressor->table_size);
 		break;
 	}
 	*/
diff --git a/drivers/usb/media/sn9c102.h b/drivers/usb/media/sn9c102.h
index e5cea0e..17d60c1 100644
--- a/drivers/usb/media/sn9c102.h
+++ b/drivers/usb/media/sn9c102.h
@@ -1,7 +1,7 @@
 /***************************************************************************
  * V4L2 driver for SN9C10x PC Camera Controllers                           *
  *                                                                         *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -23,7 +23,8 @@
 
 #include <linux/version.h>
 #include <linux/usb.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/spinlock.h>
@@ -52,13 +53,6 @@
 
 /*****************************************************************************/
 
-#define SN9C102_MODULE_NAME     "V4L2 driver for SN9C10x PC Camera Controllers"
-#define SN9C102_MODULE_AUTHOR   "(C) 2004-2005 Luca Risolia"
-#define SN9C102_AUTHOR_EMAIL    "<luca.risolia@studio.unibo.it>"
-#define SN9C102_MODULE_LICENSE  "GPL"
-#define SN9C102_MODULE_VERSION  "1:1.24a"
-#define SN9C102_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 24)
-
 enum sn9c102_bridge {
 	BRIDGE_SN9C101 = 0x01,
 	BRIDGE_SN9C102 = 0x02,
@@ -102,12 +96,13 @@
 	STREAM_ON,
 };
 
+typedef char sn9c103_sof_header_t[18];
 typedef char sn9c102_sof_header_t[12];
 typedef char sn9c102_eof_header_t[4];
 
 struct sn9c102_sysfs_attr {
 	u8 reg, i2c_reg;
-	sn9c102_sof_header_t frame_header;
+	sn9c103_sof_header_t frame_header;
 };
 
 struct sn9c102_module_param {
@@ -118,8 +113,6 @@
 static DECLARE_RWSEM(sn9c102_disconnect);
 
 struct sn9c102_device {
-	struct device dev;
-
 	struct video_device* v4ldev;
 
 	enum sn9c102_bridge bridge;
@@ -140,8 +133,8 @@
 	struct v4l2_jpegcompression compression;
 
 	struct sn9c102_sysfs_attr sysfs;
-	sn9c102_sof_header_t sof_header;
-	u16 reg[32];
+	sn9c103_sof_header_t sof_header;
+	u16 reg[63];
 
 	struct sn9c102_module_param module_param;
 
@@ -160,7 +153,6 @@
                       struct sn9c102_sensor* sensor)
 {
 	cam->sensor = sensor;
-	cam->sensor->dev = &cam->dev;
 	cam->sensor->usbdev = cam->usbdev;
 }
 
@@ -170,19 +162,24 @@
 #undef KDBG
 #ifdef SN9C102_DEBUG
 #	define DBG(level, fmt, args...)                                       \
-{                                                                             \
+do {                                                                          \
 	if (debug >= (level)) {                                               \
 		if ((level) == 1)                                             \
-			dev_err(&cam->dev, fmt "\n", ## args);                \
+			dev_err(&cam->usbdev->dev, fmt "\n", ## args);        \
 		else if ((level) == 2)                                        \
-			dev_info(&cam->dev, fmt "\n", ## args);               \
+			dev_info(&cam->usbdev->dev, fmt "\n", ## args);       \
 		else if ((level) >= 3)                                        \
-			dev_info(&cam->dev, "[%s:%d] " fmt "\n",              \
+			dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n",      \
 			         __FUNCTION__, __LINE__ , ## args);           \
 	}                                                                     \
-}
+} while (0)
+#	define V4LDBG(level, name, cmd)                                       \
+do {                                                                          \
+	if (debug >= (level))                                                 \
+		v4l_print_ioctl(name, cmd);                                   \
+} while (0)
 #	define KDBG(level, fmt, args...)                                      \
-{                                                                             \
+do {                                                                          \
 	if (debug >= (level)) {                                               \
 		if ((level) == 1 || (level) == 2)                             \
 			pr_info("sn9c102: " fmt "\n", ## args);               \
@@ -190,17 +187,18 @@
 			pr_debug("sn9c102: [%s:%d] " fmt "\n", __FUNCTION__,  \
 			         __LINE__ , ## args);                         \
 	}                                                                     \
-}
+} while (0)
 #else
-#	define KDBG(level, fmt, args...) do {;} while(0);
-#	define DBG(level, fmt, args...) do {;} while(0);
+#	define DBG(level, fmt, args...) do {;} while(0)
+#	define V4LDBG(level, name, cmd) do {;} while(0)
+#	define KDBG(level, fmt, args...) do {;} while(0)
 #endif
 
 #undef PDBG
 #define PDBG(fmt, args...)                                                    \
-dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args);
+dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args)
 
 #undef PDBGG
-#define PDBGG(fmt, args...) do {;} while(0); /* placeholder */
+#define PDBGG(fmt, args...) do {;} while(0) /* placeholder */
 
 #endif /* _SN9C102_H_ */
diff --git a/drivers/usb/media/sn9c102_core.c b/drivers/usb/media/sn9c102_core.c
index 8d1a1c3..c81397e 100644
--- a/drivers/usb/media/sn9c102_core.c
+++ b/drivers/usb/media/sn9c102_core.c
@@ -1,7 +1,7 @@
 /***************************************************************************
  * V4L2 driver for SN9C10x PC Camera Controllers                           *
  *                                                                         *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -45,6 +45,15 @@
 
 /*****************************************************************************/
 
+#define SN9C102_MODULE_NAME     "V4L2 driver for SN9C10x PC Camera Controllers"
+#define SN9C102_MODULE_AUTHOR   "(C) 2004-2006 Luca Risolia"
+#define SN9C102_AUTHOR_EMAIL    "<luca.risolia@studio.unibo.it>"
+#define SN9C102_MODULE_LICENSE  "GPL"
+#define SN9C102_MODULE_VERSION  "1:1.26"
+#define SN9C102_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 26)
+
+/*****************************************************************************/
+
 MODULE_DEVICE_TABLE(usb, sn9c102_id_table);
 
 MODULE_AUTHOR(SN9C102_MODULE_AUTHOR " " SN9C102_AUTHOR_EMAIL);
@@ -70,10 +79,10 @@
                                SN9C102_FORCE_MUNMAP};
 module_param_array(force_munmap, bool, NULL, 0444);
 MODULE_PARM_DESC(force_munmap,
-                 "\n<0|1[,...]> Force the application to unmap previously "
-                 "\nmapped buffer memory before calling any VIDIOC_S_CROP or "
-                 "\nVIDIOC_S_FMT ioctl's. Not all the applications support "
-                 "\nthis feature. This parameter is specific for each "
+                 "\n<0|1[,...]> Force the application to unmap previously"
+                 "\nmapped buffer memory before calling any VIDIOC_S_CROP or"
+                 "\nVIDIOC_S_FMT ioctl's. Not all the applications support"
+                 "\nthis feature. This parameter is specific for each"
                  "\ndetected camera."
                  "\n 0 = do not force memory unmapping"
                  "\n 1 = force memory unmapping (save memory)"
@@ -102,6 +111,9 @@
 	{0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x01},
 };
 
+static sn9c103_sof_header_t sn9c103_sof_header[] = {
+	{0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96, 0x20},
+};
 
 static sn9c102_eof_header_t sn9c102_eof_header[] = {
 	{0x00, 0x00, 0x00, 0x00},
@@ -112,50 +124,6 @@
 
 /*****************************************************************************/
 
-static void* rvmalloc(size_t size)
-{
-	void* mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-
-	mem = vmalloc_32((unsigned long)size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size);
-
-	adr = (unsigned long)mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-
-static void rvfree(void* mem, size_t size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	size = PAGE_ALIGN(size);
-
-	adr = (unsigned long)mem;
-	while (size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	vfree(mem);
-}
-
-
 static u32 
 sn9c102_request_buffers(struct sn9c102_device* cam, u32 count, 
                         enum sn9c102_io_method io)
@@ -174,7 +142,7 @@
 
 	cam->nbuffers = count;
 	while (cam->nbuffers > 0) {
-		if ((buff = rvmalloc(cam->nbuffers * PAGE_ALIGN(imagesize))))
+		if ((buff = vmalloc_32(cam->nbuffers * PAGE_ALIGN(imagesize))))
 			break;
 		cam->nbuffers--;
 	}
@@ -198,10 +166,10 @@
 static void sn9c102_release_buffers(struct sn9c102_device* cam)
 {
 	if (cam->nbuffers) {
-		rvfree(cam->frame[0].bufmem,
-		       cam->nbuffers * PAGE_ALIGN(cam->frame[0].buf.length));
+		vfree(cam->frame[0].bufmem);
 		cam->nbuffers = 0;
 	}
+	cam->frame_current = NULL;
 }
 
 
@@ -219,6 +187,19 @@
 }
 
 
+static void sn9c102_requeue_outqueue(struct sn9c102_device* cam)
+{
+	struct sn9c102_frame_t *i;
+
+	list_for_each_entry(i, &cam->outqueue, frame) {
+		i->state = F_QUEUED;
+		list_add(&i->frame, &cam->inqueue);
+	}
+
+	INIT_LIST_HEAD(&cam->outqueue);
+}
+
+
 static void sn9c102_queue_unusedframes(struct sn9c102_device* cam)
 {
 	unsigned long lock_flags;
@@ -235,19 +216,46 @@
 
 /*****************************************************************************/
 
+int sn9c102_write_regs(struct sn9c102_device* cam, u8* buff, u16 index)
+{
+	struct usb_device* udev = cam->usbdev;
+	int i, res;
+
+	if (index + sizeof(buff) >= ARRAY_SIZE(cam->reg))
+		return -1;
+
+	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
+	                      index, 0, buff, sizeof(buff),
+	                      SN9C102_CTRL_TIMEOUT*sizeof(buff));
+	if (res < 0) {
+		DBG(3, "Failed to write registers (index 0x%02X, error %d)",
+		    index, res);
+		return -1;
+	}
+
+	for (i = 0; i < sizeof(buff); i++)
+		cam->reg[index+i] = buff[i];
+
+	return 0;
+}
+
+
 int sn9c102_write_reg(struct sn9c102_device* cam, u8 value, u16 index)
 {
 	struct usb_device* udev = cam->usbdev;
 	u8* buff = cam->control_buffer;
 	int res;
 
+	if (index >= ARRAY_SIZE(cam->reg))
+		return -1;
+
 	*buff = value;
 
 	res = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x08, 0x41,
 	                      index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
 	if (res < 0) {
 		DBG(3, "Failed to write a register (value 0x%02X, index "
-		       "0x%02X, error %d)", value, index, res)
+		       "0x%02X, error %d)", value, index, res);
 		return -1;
 	}
 
@@ -268,7 +276,7 @@
 	                      index, 0, buff, 1, SN9C102_CTRL_TIMEOUT);
 	if (res < 0)
 		DBG(3, "Failed to read a register (index 0x%02X, error %d)",
-		    index, res)
+		    index, res);
 
 	return (res >= 0) ? (int)(*buff) : -1;
 }
@@ -276,8 +284,8 @@
 
 int sn9c102_pread_reg(struct sn9c102_device* cam, u16 index)
 {
-	if (index > 0x1f)
-		return -EINVAL;
+	if (index >= ARRAY_SIZE(cam->reg))
+		return -1;
 
 	return cam->reg[index];
 }
@@ -367,10 +375,10 @@
 	err += sn9c102_i2c_detect_read_error(cam, sensor);
 
 	PDBGG("I2C read: address 0x%02X, first read byte: 0x%02X", data1,
-	      data[4])
+	      data[4]);
 
 	if (err) {
-		DBG(3, "I2C read failed for %s image sensor", sensor->name)
+		DBG(3, "I2C read failed for %s image sensor", sensor->name);
 		return -1;
 	}
 
@@ -410,11 +418,11 @@
 	err += sn9c102_i2c_detect_write_error(cam, sensor);
 
 	if (err)
-		DBG(3, "I2C write failed for %s image sensor", sensor->name)
+		DBG(3, "I2C write failed for %s image sensor", sensor->name);
 
 	PDBGG("I2C raw write: %u bytes, data0 = 0x%02X, data1 = 0x%02X, "
 	      "data2 = 0x%02X, data3 = 0x%02X, data4 = 0x%02X, data5 = 0x%02X",
-	      n, data0, data1, data2, data3, data4, data5)
+	      n, data0, data1, data2, data3, data4, data5);
 
 	return err ? -1 : 0;
 }
@@ -461,13 +469,27 @@
 static void*
 sn9c102_find_sof_header(struct sn9c102_device* cam, void* mem, size_t len)
 {
-	size_t soflen = sizeof(sn9c102_sof_header_t), i;
-	u8 j, n = sizeof(sn9c102_sof_header) / soflen;
+	size_t soflen = 0, i;
+	u8 j, n = 0;
 
-	for (i = 0; (len >= soflen) && (i <= len - soflen); i++)
+	switch (cam->bridge) {
+	case BRIDGE_SN9C101:
+	case BRIDGE_SN9C102:
+		soflen = sizeof(sn9c102_sof_header_t);
+		n = sizeof(sn9c102_sof_header) / soflen;
+		break;
+	case BRIDGE_SN9C103:
+		soflen = sizeof(sn9c103_sof_header_t);
+		n = sizeof(sn9c103_sof_header) / soflen;
+	}
+
+ 	for (i = 0; (len >= soflen) && (i <= len - soflen); i++)
 		for (j = 0; j < n; j++)
-			/* It's enough to compare 7 bytes */
-			if (!memcmp(mem + i, sn9c102_sof_header[j], 7)) {
+			/* The invariable part of the header is 6 bytes long */
+			if ((cam->bridge != BRIDGE_SN9C103 &&
+			    !memcmp(mem + i, sn9c102_sof_header[j], 6)) ||
+			    (cam->bridge == BRIDGE_SN9C103 &&
+			    !memcmp(mem + i, sn9c103_sof_header[j], 6))) {
 				memcpy(cam->sof_header, mem + i, soflen);
 				/* Skip the header */
 				return mem + i + soflen;
@@ -499,8 +521,7 @@
 {
 	struct sn9c102_device* cam = urb->context;
 	struct sn9c102_frame_t** f;
-	size_t imagesize;
-	unsigned long lock_flags;
+	size_t imagesize, soflen;
 	u8 i;
 	int err = 0;
 
@@ -513,7 +534,7 @@
 		cam->stream = STREAM_OFF;
 		if ((*f))
 			(*f)->state = F_QUEUED;
-		DBG(3, "Stream interrupted")
+		DBG(3, "Stream interrupted");
 		wake_up_interruptible(&cam->wait_stream);
 	}
 
@@ -536,6 +557,10 @@
 	             cam->sensor->pix_format.height *
 	             cam->sensor->pix_format.priv) / 8;
 
+	soflen = (cam->bridge) == BRIDGE_SN9C103 ?
+	                          sizeof(sn9c103_sof_header_t) :
+	                          sizeof(sn9c102_sof_header_t);
+
 	for (i = 0; i < urb->number_of_packets; i++) {
 		unsigned int img, len, status;
 		void *pos, *sof, *eof;
@@ -545,19 +570,12 @@
 		pos = urb->iso_frame_desc[i].offset + urb->transfer_buffer;
 
 		if (status) {
-			DBG(3, "Error in isochronous frame")
+			DBG(3, "Error in isochronous frame");
 			(*f)->state = F_ERROR;
 			continue;
 		}
 
-		PDBGG("Isochrnous frame: length %u, #%u i", len, i)
-
-		/*
-		   NOTE: It is probably correct to assume that SOF and EOF
-		         headers do not occur between two consecutive packets,
-		         but who knows..Whatever is the truth, this assumption
-		         doesn't introduce bugs.
-		*/
+		PDBGG("Isochrnous frame: length %u, #%u i", len, i);
 
 redo:
 		sof = sn9c102_find_sof_header(cam, pos, len);
@@ -575,10 +593,10 @@
 					        imagesize;
 					img = imagesize - (*f)->buf.bytesused;
 					DBG(3, "Expected EOF not found: "
-					       "video frame cut")
+					       "video frame cut");
 					if (eof)
 						DBG(3, "Exceeded limit: +%u "
-						       "bytes", (unsigned)(b))
+						       "bytes", (unsigned)(b));
 				}
 
 				memcpy((*f)->bufmem + (*f)->buf.bytesused, pos,
@@ -595,8 +613,7 @@
 					u32 b = (*f)->buf.bytesused;
 					(*f)->state = F_DONE;
 					(*f)->buf.sequence= ++cam->frame_count;
-					spin_lock_irqsave(&cam->queue_lock,
-					                  lock_flags);
+					spin_lock(&cam->queue_lock);
 					list_move_tail(&(*f)->frame,
 					               &cam->outqueue);
 					if (!list_empty(&cam->inqueue))
@@ -606,13 +623,11 @@
 						        frame );
 					else
 						(*f) = NULL;
-					spin_unlock_irqrestore(&cam->queue_lock
-					                       , lock_flags);
+					spin_unlock(&cam->queue_lock);
 					memcpy(cam->sysfs.frame_header,
-					       cam->sof_header,
-					       sizeof(sn9c102_sof_header_t));
-					DBG(3, "Video frame captured: "
-					       "%lu bytes", (unsigned long)(b))
+					       cam->sof_header, soflen);
+					DBG(3, "Video frame captured: %lu "
+					       "bytes", (unsigned long)(b));
 
 					if (!(*f))
 						goto resubmit_urb;
@@ -621,18 +636,19 @@
 					(*f)->state = F_ERROR;
 					DBG(3, "Not expected EOF after %lu "
 					       "bytes of image data", 
-					  (unsigned long)((*f)->buf.bytesused))
+					    (unsigned long)
+					    ((*f)->buf.bytesused));
 				}
 
 				if (sof) /* (1) */
 					goto start_of_frame;
 
 			} else if (eof) {
-				DBG(3, "EOF without SOF")
+				DBG(3, "EOF without SOF");
 				continue;
 
 			} else {
-				PDBGG("Ignoring pointless isochronous frame")
+				PDBGG("Ignoring pointless isochronous frame");
 				continue;
 			}
 
@@ -642,7 +658,7 @@
 			(*f)->buf.bytesused = 0;
 			len -= (sof - pos);
 			pos = sof;
-			DBG(3, "SOF detected: new video frame")
+			DBG(3, "SOF detected: new video frame");
 			if (len)
 				goto redo;
 
@@ -653,12 +669,13 @@
 			else {
 				if (cam->sensor->pix_format.pixelformat ==
 				    V4L2_PIX_FMT_SN9C10X) {
-					eof = sof-sizeof(sn9c102_sof_header_t);
+					eof = sof - soflen;
 					goto end_of_frame;
 				} else {
 					DBG(3, "SOF before expected EOF after "
 					       "%lu bytes of image data", 
-					  (unsigned long)((*f)->buf.bytesused))
+					    (unsigned long)
+					    ((*f)->buf.bytesused));
 					goto start_of_frame;
 				}
 			}
@@ -670,7 +687,7 @@
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0 && err != -EPERM) {
 		cam->state |= DEV_MISCONFIGURED;
-		DBG(1, "usb_submit_urb() failed")
+		DBG(1, "usb_submit_urb() failed");
 	}
 
 	wake_up_interruptible(&cam->wait_frame);
@@ -681,18 +698,22 @@
 {
 	struct usb_device *udev = cam->usbdev;
 	struct urb* urb;
-	const unsigned int wMaxPacketSize[] = {0, 128, 256, 384, 512,
-	                                       680, 800, 900, 1023};
-	const unsigned int psz = wMaxPacketSize[SN9C102_ALTERNATE_SETTING];
+	const unsigned int sn9c102_wMaxPacketSize[] = {0, 128, 256, 384, 512,
+	                                               680, 800, 900, 1023};
+	const unsigned int sn9c103_wMaxPacketSize[] = {0, 128, 256, 384, 512,
+	                                               680, 800, 900, 1003};
+	const unsigned int psz = (cam->bridge == BRIDGE_SN9C103) ?
+	                    sn9c103_wMaxPacketSize[SN9C102_ALTERNATE_SETTING] :
+	                    sn9c102_wMaxPacketSize[SN9C102_ALTERNATE_SETTING];
 	s8 i, j;
 	int err = 0;
 
 	for (i = 0; i < SN9C102_URBS; i++) {
-		cam->transfer_buffer[i] = kmalloc(SN9C102_ISO_PACKETS * psz,
+		cam->transfer_buffer[i] = kzalloc(SN9C102_ISO_PACKETS * psz,
 		                                  GFP_KERNEL);
 		if (!cam->transfer_buffer[i]) {
 			err = -ENOMEM;
-			DBG(1, "Not enough memory")
+			DBG(1, "Not enough memory");
 			goto free_buffers;
 		}
 	}
@@ -702,7 +723,7 @@
 		cam->urb[i] = urb;
 		if (!urb) {
 			err = -ENOMEM;
-			DBG(1, "usb_alloc_urb() failed")
+			DBG(1, "usb_alloc_urb() failed");
 			goto free_urbs;
 		}
 		urb->dev = udev;
@@ -725,14 +746,14 @@
 		err = sn9c102_write_reg(cam, cam->reg[0x01] | 0x04, 0x01);
 		if (err) {
 			err = -EIO;
-			DBG(1, "I/O hardware error")
+			DBG(1, "I/O hardware error");
 			goto free_urbs;
 		}
 	}
 
 	err = usb_set_interface(udev, 0, SN9C102_ALTERNATE_SETTING);
 	if (err) {
-		DBG(1, "usb_set_interface() failed")
+		DBG(1, "usb_set_interface() failed");
 		goto free_urbs;
 	}
 
@@ -743,7 +764,7 @@
 		if (err) {
 			for (j = i-1; j >= 0; j--)
 				usb_kill_urb(cam->urb[j]);
-			DBG(1, "usb_submit_urb() failed, error %d", err)
+			DBG(1, "usb_submit_urb() failed, error %d", err);
 			goto free_urbs;
 		}
 	}
@@ -779,7 +800,7 @@
 
 	err = usb_set_interface(udev, 0, 0); /* 0 Mb/s */
 	if (err)
-		DBG(3, "usb_set_interface() failed")
+		DBG(3, "usb_set_interface() failed");
 
 	return err;
 }
@@ -799,7 +820,7 @@
 	else if (err) {
 		cam->state |= DEV_MISCONFIGURED;
 		DBG(1, "The camera is misconfigured. To use it, close and "
-		       "open /dev/video%d again.", cam->v4ldev->minor)
+		       "open /dev/video%d again.", cam->v4ldev->minor);
 		return err;
 	}
 
@@ -808,6 +829,7 @@
 
 /*****************************************************************************/
 
+#ifdef CONFIG_VIDEO_ADV_DEBUG
 static u8 sn9c102_strtou8(const char* buff, size_t len, ssize_t* count)
 {
 	char str[5];
@@ -885,8 +907,8 @@
 
 	cam->sysfs.reg = index;
 
-	DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg)
-	DBG(3, "Written bytes: %zd", count)
+	DBG(2, "Moved SN9C10X register index to 0x%02X", cam->sysfs.reg);
+	DBG(3, "Written bytes: %zd", count);
 
 	up(&sn9c102_sysfs_lock);
 
@@ -916,7 +938,7 @@
 
 	count = sprintf(buf, "%d\n", val);
 
-	DBG(3, "Read bytes: %zd", count)
+	DBG(3, "Read bytes: %zd", count);
 
 	up(&sn9c102_sysfs_lock);
 
@@ -954,8 +976,8 @@
 	}
 
 	DBG(2, "Written SN9C10X reg. 0x%02X, val. 0x%02X",
-	    cam->sysfs.reg, value)
-	DBG(3, "Written bytes: %zd", count)
+	    cam->sysfs.reg, value);
+	DBG(3, "Written bytes: %zd", count);
 
 	up(&sn9c102_sysfs_lock);
 
@@ -979,7 +1001,7 @@
 
 	count = sprintf(buf, "%u\n", cam->sysfs.i2c_reg);
 
-	DBG(3, "Read bytes: %zd", count)
+	DBG(3, "Read bytes: %zd", count);
 
 	up(&sn9c102_sysfs_lock);
 
@@ -1011,8 +1033,8 @@
 
 	cam->sysfs.i2c_reg = index;
 
-	DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg)
-	DBG(3, "Written bytes: %zd", count)
+	DBG(2, "Moved sensor register index to 0x%02X", cam->sysfs.i2c_reg);
+	DBG(3, "Written bytes: %zd", count);
 
 	up(&sn9c102_sysfs_lock);
 
@@ -1047,7 +1069,7 @@
 
 	count = sprintf(buf, "%d\n", val);
 
-	DBG(3, "Read bytes: %zd", count)
+	DBG(3, "Read bytes: %zd", count);
 
 	up(&sn9c102_sysfs_lock);
 
@@ -1090,8 +1112,8 @@
 	}
 
 	DBG(2, "Written sensor reg. 0x%02X, val. 0x%02X",
-	    cam->sysfs.i2c_reg, value)
-	DBG(3, "Written bytes: %zd", count)
+	    cam->sysfs.i2c_reg, value);
+	DBG(3, "Written bytes: %zd", count);
 
 	up(&sn9c102_sysfs_lock);
 
@@ -1193,7 +1215,7 @@
 	count = sizeof(cam->sysfs.frame_header);
 	memcpy(buf, cam->sysfs.frame_header, count);
 
-	DBG(3, "Frame header, read bytes: %zd", count)
+	DBG(3, "Frame header, read bytes: %zd", count);
 
 	return count;
 } 
@@ -1227,11 +1249,12 @@
 		video_device_create_file(v4ldev, &class_device_attr_blue);
 		video_device_create_file(v4ldev, &class_device_attr_red);
 	}
-	if (cam->sensor->sysfs_ops) {
+	if (cam->sensor && cam->sensor->sysfs_ops) {
 		video_device_create_file(v4ldev, &class_device_attr_i2c_reg);
 		video_device_create_file(v4ldev, &class_device_attr_i2c_val);
 	}
 }
+#endif /* CONFIG_VIDEO_ADV_DEBUG */
 
 /*****************************************************************************/
 
@@ -1281,7 +1304,7 @@
 	if (err)
 		return -EIO;
 
-	PDBGG("Scaling factor: %u", scale)
+	PDBGG("Scaling factor: %u", scale);
 
 	return 0;
 }
@@ -1304,7 +1327,7 @@
 		return -EIO;
 
 	PDBGG("h_start, v_start, h_size, v_size, ho_size, vo_size "
-	      "%u %u %u %u", h_start, v_start, h_size, v_size)
+	      "%u %u %u %u", h_start, v_start, h_size, v_size);
 
 	return 0;
 }
@@ -1336,7 +1359,7 @@
 	if (s->init) {
 		err = s->init(cam);
 		if (err) {
-			DBG(3, "Sensor initialization failed")
+			DBG(3, "Sensor initialization failed");
 			return err;
 		}
 	}
@@ -1353,13 +1376,13 @@
 
 	if (s->pix_format.pixelformat == V4L2_PIX_FMT_SN9C10X)
 		DBG(3, "Compressed video format is active, quality %d",
-		    cam->compression.quality)
+		    cam->compression.quality);
 	else
-		DBG(3, "Uncompressed video format is active")
+		DBG(3, "Uncompressed video format is active");
 
 	if (s->set_crop)
 		if ((err = s->set_crop(cam, rect))) {
-			DBG(3, "set_crop() failed")
+			DBG(3, "set_crop() failed");
 			return err;
 		}
 
@@ -1372,11 +1395,11 @@
 				err = s->set_ctrl(cam, &ctrl);
 				if (err) {
 					DBG(3, "Set %s control failed",
-					    s->qctrl[i].name)
+					    s->qctrl[i].name);
 					return err;
 				}
 				DBG(3, "Image sensor supports '%s' control",
-				    s->qctrl[i].name)
+				    s->qctrl[i].name);
 			}
 	}
 
@@ -1392,7 +1415,7 @@
 		cam->state |= DEV_INITIALIZED;
 	}
 
-	DBG(2, "Initialization succeeded")
+	DBG(2, "Initialization succeeded");
 	return 0;
 }
 
@@ -1401,7 +1424,7 @@
 {
 	down(&sn9c102_sysfs_lock);
 
-	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor)
+	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
 	video_set_drvdata(cam->v4ldev, NULL);
 	video_unregister_device(cam->v4ldev);
 
@@ -1432,7 +1455,7 @@
 	}
 
 	if (cam->users) {
-		DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor)
+		DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor);
 		if ((filp->f_flags & O_NONBLOCK) ||
 		    (filp->f_flags & O_NDELAY)) {
 			err = -EWOULDBLOCK;
@@ -1458,7 +1481,7 @@
 		err = sn9c102_init(cam);
 		if (err) {
 			DBG(1, "Initialization failed again. "
-			       "I will retry on next open().")
+			       "I will retry on next open().");
 			goto out;
 		}
 		cam->state &= ~DEV_MISCONFIGURED;
@@ -1475,7 +1498,7 @@
 	cam->frame_count = 0;
 	sn9c102_empty_framequeues(cam);
 
-	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor)
+	DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor);
 
 out:
 	up(&cam->dev_sem);
@@ -1504,7 +1527,7 @@
 	cam->users--;
 	wake_up_interruptible_nr(&cam->open, 1);
 
-	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor)
+	DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor);
 
 	up(&cam->dev_sem);
 
@@ -1524,32 +1547,38 @@
 		return -ERESTARTSYS;
 
 	if (cam->state & DEV_DISCONNECTED) {
-		DBG(1, "Device not present")
+		DBG(1, "Device not present");
 		up(&cam->fileop_sem);
 		return -ENODEV;
 	}
 
 	if (cam->state & DEV_MISCONFIGURED) {
-		DBG(1, "The camera is misconfigured. Close and open it again.")
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
 		up(&cam->fileop_sem);
 		return -EIO;
 	}
 
 	if (cam->io == IO_MMAP) {
 		DBG(3, "Close and open the device again to choose "
-		       "the read method")
+		       "the read method");
 		up(&cam->fileop_sem);
 		return -EINVAL;
 	}
 
 	if (cam->io == IO_NONE) {
 		if (!sn9c102_request_buffers(cam,cam->nreadbuffers, IO_READ)) {
-			DBG(1, "read() failed, not enough memory")
+			DBG(1, "read() failed, not enough memory");
 			up(&cam->fileop_sem);
 			return -ENOMEM;
 		}
 		cam->io = IO_READ;
 		cam->stream = STREAM_ON;
+	}
+
+	if (list_empty(&cam->inqueue)) {
+		if (!list_empty(&cam->outqueue))
+			sn9c102_empty_framequeues(cam);
 		sn9c102_queue_unusedframes(cam);
 	}
 
@@ -1584,6 +1613,16 @@
 
 	f = list_entry(cam->outqueue.prev, struct sn9c102_frame_t, frame);
 
+	if (count > f->buf.bytesused)
+		count = f->buf.bytesused;
+
+	if (copy_to_user(buf, f->bufmem, count)) {
+		err = -EFAULT;
+		goto exit;
+	}
+	*f_pos += count;
+
+exit:
 	spin_lock_irqsave(&cam->queue_lock, lock_flags);
 	list_for_each_entry(i, &cam->outqueue, frame)
 		i->state = F_UNUSED;
@@ -1592,16 +1631,8 @@
 
 	sn9c102_queue_unusedframes(cam);
 
-	if (count > f->buf.bytesused)
-		count = f->buf.bytesused;
-
-	if (copy_to_user(buf, f->bufmem, count)) {
-		up(&cam->fileop_sem);
-		return -EFAULT;
-	}
-	*f_pos += count;
-
-	PDBGG("Frame #%lu, bytes read: %zu", (unsigned long)f->buf.index,count)
+	PDBGG("Frame #%lu, bytes read: %zu",
+	      (unsigned long)f->buf.index, count);
 
 	up(&cam->fileop_sem);
 
@@ -1612,33 +1643,42 @@
 static unsigned int sn9c102_poll(struct file *filp, poll_table *wait)
 {
 	struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
+	struct sn9c102_frame_t* f;
+	unsigned long lock_flags;
 	unsigned int mask = 0;
 
 	if (down_interruptible(&cam->fileop_sem))
 		return POLLERR;
 
 	if (cam->state & DEV_DISCONNECTED) {
-		DBG(1, "Device not present")
+		DBG(1, "Device not present");
 		goto error;
 	}
 
 	if (cam->state & DEV_MISCONFIGURED) {
-		DBG(1, "The camera is misconfigured. Close and open it again.")
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
 		goto error;
 	}
 
 	if (cam->io == IO_NONE) {
 		if (!sn9c102_request_buffers(cam, cam->nreadbuffers,
 		                             IO_READ)) {
-			DBG(1, "poll() failed, not enough memory")
+			DBG(1, "poll() failed, not enough memory");
 			goto error;
 		}
 		cam->io = IO_READ;
 		cam->stream = STREAM_ON;
 	}
 
-	if (cam->io == IO_READ)
+	if (cam->io == IO_READ) {
+		spin_lock_irqsave(&cam->queue_lock, lock_flags);
+		list_for_each_entry(f, &cam->outqueue, frame)
+			f->state = F_UNUSED;
+		INIT_LIST_HEAD(&cam->outqueue);
+		spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
 		sn9c102_queue_unusedframes(cam);
+	}
 
 	poll_wait(filp, &cam->wait_frame, wait);
 
@@ -1680,22 +1720,22 @@
 {
 	struct sn9c102_device* cam = video_get_drvdata(video_devdata(filp));
 	unsigned long size = vma->vm_end - vma->vm_start,
-	              start = vma->vm_start,
-	              pos,
-	              page;
+	              start = vma->vm_start;
+	void *pos;
 	u32 i;
 
 	if (down_interruptible(&cam->fileop_sem))
 		return -ERESTARTSYS;
 
 	if (cam->state & DEV_DISCONNECTED) {
-		DBG(1, "Device not present")
+		DBG(1, "Device not present");
 		up(&cam->fileop_sem);
 		return -ENODEV;
 	}
 
 	if (cam->state & DEV_MISCONFIGURED) {
-		DBG(1, "The camera is misconfigured. Close and open it again.")
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
 		up(&cam->fileop_sem);
 		return -EIO;
 	}
@@ -1715,15 +1755,12 @@
 		return -EINVAL;
 	}
 
-	/* VM_IO is eventually going to replace PageReserved altogether */
 	vma->vm_flags |= VM_IO;
-	vma->vm_flags |= VM_RESERVED; /* avoid to swap out this VMA */
+	vma->vm_flags |= VM_RESERVED;
 
-	pos = (unsigned long)cam->frame[i].bufmem;
+	pos = cam->frame[i].bufmem;
 	while (size > 0) { /* size is page-aligned */
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE,
-		                    vma->vm_page_prot)) {
+		if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
 			up(&cam->fileop_sem);
 			return -EAGAIN;
 		}
@@ -1742,6 +1779,783 @@
 	return 0;
 }
 
+/*****************************************************************************/
+
+static int
+sn9c102_vidioc_querycap(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_capability cap = {
+		.driver = "sn9c102",
+		.version = SN9C102_MODULE_VERSION_CODE,
+		.capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
+		                V4L2_CAP_STREAMING,
+	};
+
+	strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
+	if (usb_make_path(cam->usbdev, cap.bus_info, sizeof(cap.bus_info)) < 0)
+		strlcpy(cap.bus_info, cam->usbdev->dev.bus_id,
+		        sizeof(cap.bus_info));
+
+	if (copy_to_user(arg, &cap, sizeof(cap)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_enuminput(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_input i;
+
+	if (copy_from_user(&i, arg, sizeof(i)))
+		return -EFAULT;
+
+	if (i.index)
+		return -EINVAL;
+
+	memset(&i, 0, sizeof(i));
+	strcpy(i.name, "Camera");
+
+	if (copy_to_user(arg, &i, sizeof(i)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_gs_input(struct sn9c102_device* cam, void __user * arg)
+{
+	int index;
+
+	if (copy_from_user(&index, arg, sizeof(index)))
+		return -EFAULT;
+
+	if (index != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_query_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+	struct sn9c102_sensor* s = cam->sensor;
+	struct v4l2_queryctrl qc;
+	u8 i;
+
+	if (copy_from_user(&qc, arg, sizeof(qc)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+		if (qc.id && qc.id == s->qctrl[i].id) {
+			memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
+			if (copy_to_user(arg, &qc, sizeof(qc)))
+				return -EFAULT;
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+
+static int
+sn9c102_vidioc_g_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+	struct sn9c102_sensor* s = cam->sensor;
+	struct v4l2_control ctrl;
+	int err = 0;
+	u8 i;
+
+	if (!s->get_ctrl && !s->set_ctrl)
+		return -EINVAL;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+
+	if (!s->get_ctrl) {
+		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+			if (ctrl.id && ctrl.id == s->qctrl[i].id) {
+				ctrl.value = s->_qctrl[i].default_value;
+				goto exit;
+			}
+		return -EINVAL;
+	} else
+		err = s->get_ctrl(cam, &ctrl);
+
+exit:
+	if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
+		return -EFAULT;
+
+	return err;
+}
+
+
+static int
+sn9c102_vidioc_s_ctrl(struct sn9c102_device* cam, void __user * arg)
+{
+	struct sn9c102_sensor* s = cam->sensor;
+	struct v4l2_control ctrl;
+	u8 i;
+	int err = 0;
+
+	if (!s->set_ctrl)
+		return -EINVAL;
+
+	if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
+		return -EFAULT;
+
+	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
+		if (ctrl.id == s->qctrl[i].id) {
+			if (ctrl.value < s->qctrl[i].minimum ||
+			    ctrl.value > s->qctrl[i].maximum)
+				return -ERANGE;
+			ctrl.value -= ctrl.value % s->qctrl[i].step;
+			break;
+		}
+
+	if ((err = s->set_ctrl(cam, &ctrl)))
+		return err;
+
+	s->_qctrl[i].default_value = ctrl.value;
+
+	PDBGG("VIDIOC_S_CTRL: id %lu, value %lu",
+	      (unsigned long)ctrl.id, (unsigned long)ctrl.value);
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_cropcap(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
+
+	cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	cc->pixelaspect.numerator = 1;
+	cc->pixelaspect.denominator = 1;
+
+	if (copy_to_user(arg, cc, sizeof(*cc)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_crop(struct sn9c102_device* cam, void __user * arg)
+{
+	struct sn9c102_sensor* s = cam->sensor;
+	struct v4l2_crop crop = {
+		.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+	};
+
+	memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
+
+	if (copy_to_user(arg, &crop, sizeof(crop)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg)
+{
+	struct sn9c102_sensor* s = cam->sensor;
+	struct v4l2_crop crop;
+	struct v4l2_rect* rect;
+	struct v4l2_rect* bounds = &(s->cropcap.bounds);
+	struct v4l2_pix_format* pix_format = &(s->pix_format);
+	u8 scale;
+	const enum sn9c102_stream_state stream = cam->stream;
+	const u32 nbuffers = cam->nbuffers;
+	u32 i;
+	int err = 0;
+
+	if (copy_from_user(&crop, arg, sizeof(crop)))
+		return -EFAULT;
+
+	rect = &(crop.c);
+
+	if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (cam->module_param.force_munmap)
+		for (i = 0; i < cam->nbuffers; i++)
+			if (cam->frame[i].vma_use_count) {
+				DBG(3, "VIDIOC_S_CROP failed. "
+				       "Unmap the buffers first.");
+				return -EINVAL;
+			}
+
+	/* Preserve R,G or B origin */
+	rect->left = (s->_rect.left & 1L) ? rect->left | 1L : rect->left & ~1L;
+	rect->top = (s->_rect.top & 1L) ? rect->top | 1L : rect->top & ~1L;
+
+	if (rect->width < 16)
+		rect->width = 16;
+	if (rect->height < 16)
+		rect->height = 16;
+	if (rect->width > bounds->width)
+		rect->width = bounds->width;
+	if (rect->height > bounds->height)
+		rect->height = bounds->height;
+	if (rect->left < bounds->left)
+		rect->left = bounds->left;
+	if (rect->top < bounds->top)
+		rect->top = bounds->top;
+	if (rect->left + rect->width > bounds->left + bounds->width)
+		rect->left = bounds->left+bounds->width - rect->width;
+	if (rect->top + rect->height > bounds->top + bounds->height)
+		rect->top = bounds->top+bounds->height - rect->height;
+
+	rect->width &= ~15L;
+	rect->height &= ~15L;
+
+	if (SN9C102_PRESERVE_IMGSCALE) {
+		/* Calculate the actual scaling factor */
+		u32 a, b;
+		a = rect->width * rect->height;
+		b = pix_format->width * pix_format->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+	} else
+		scale = 1;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = sn9c102_stream_interrupt(cam)))
+			return err;
+
+	if (copy_to_user(arg, &crop, sizeof(crop))) {
+		cam->stream = stream;
+		return -EFAULT;
+	}
+
+	if (cam->module_param.force_munmap || cam->io == IO_READ)
+		sn9c102_release_buffers(cam);
+
+	err = sn9c102_set_crop(cam, rect);
+	if (s->set_crop)
+		err += s->set_crop(cam, rect);
+	err += sn9c102_set_scale(cam, scale);
+
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	s->pix_format.width = rect->width/scale;
+	s->pix_format.height = rect->height/scale;
+	memcpy(&(s->_rect), rect, sizeof(*rect));
+
+	if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
+	    nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -ENOMEM;
+	}
+
+	if (cam->io == IO_READ)
+		sn9c102_empty_framequeues(cam);
+	else if (cam->module_param.force_munmap)
+		sn9c102_requeue_outqueue(cam);
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_enum_fmt(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_fmtdesc fmtd;
+
+	if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
+		return -EFAULT;
+
+	if (fmtd.index == 0) {
+		strcpy(fmtd.description, "bayer rgb");
+		fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
+	} else if (fmtd.index == 1) {
+		strcpy(fmtd.description, "compressed");
+		fmtd.pixelformat = V4L2_PIX_FMT_SN9C10X;
+		fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
+	} else
+		return -EINVAL;
+
+	fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
+
+	if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_fmt(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_format format;
+	struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
+
+	if (copy_from_user(&format, arg, sizeof(format)))
+		return -EFAULT;
+
+	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X)
+	                     ? 0 : (pfmt->width * pfmt->priv) / 8;
+	pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
+	pfmt->field = V4L2_FIELD_NONE;
+	memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
+
+	if (copy_to_user(arg, &format, sizeof(format)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd,
+                         void __user * arg)
+{
+	struct sn9c102_sensor* s = cam->sensor;
+	struct v4l2_format format;
+	struct v4l2_pix_format* pix;
+	struct v4l2_pix_format* pfmt = &(s->pix_format);
+	struct v4l2_rect* bounds = &(s->cropcap.bounds);
+	struct v4l2_rect rect;
+	u8 scale;
+	const enum sn9c102_stream_state stream = cam->stream;
+	const u32 nbuffers = cam->nbuffers;
+	u32 i;
+	int err = 0;
+
+	if (copy_from_user(&format, arg, sizeof(format)))
+		return -EFAULT;
+
+	pix = &(format.fmt.pix);
+
+	if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	memcpy(&rect, &(s->_rect), sizeof(rect));
+
+	{ /* calculate the actual scaling factor */
+		u32 a, b;
+		a = rect.width * rect.height;
+		b = pix->width * pix->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+	}
+
+	rect.width = scale * pix->width;
+	rect.height = scale * pix->height;
+
+	if (rect.width < 16)
+		rect.width = 16;
+	if (rect.height < 16)
+		rect.height = 16;
+	if (rect.width > bounds->left + bounds->width - rect.left)
+		rect.width = bounds->left + bounds->width - rect.left;
+	if (rect.height > bounds->top + bounds->height - rect.top)
+		rect.height = bounds->top + bounds->height - rect.top;
+
+	rect.width &= ~15L;
+	rect.height &= ~15L;
+
+	{ /* adjust the scaling factor */
+		u32 a, b;
+		a = rect.width * rect.height;
+		b = pix->width * pix->height;
+		scale = b ? (u8)((a / b) < 4 ? 1 : ((a / b) < 16 ? 2 : 4)) : 1;
+	}
+
+	pix->width = rect.width / scale;
+	pix->height = rect.height / scale;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_SN9C10X &&
+	    pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
+		pix->pixelformat = pfmt->pixelformat;
+	pix->priv = pfmt->priv; /* bpp */
+	pix->colorspace = pfmt->colorspace;
+	pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+	                    ? 0 : (pix->width * pix->priv) / 8;
+	pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
+	pix->field = V4L2_FIELD_NONE;
+
+	if (cmd == VIDIOC_TRY_FMT) {
+		if (copy_to_user(arg, &format, sizeof(format)))
+			return -EFAULT;
+		return 0;
+	}
+
+	if (cam->module_param.force_munmap)
+		for (i = 0; i < cam->nbuffers; i++)
+			if (cam->frame[i].vma_use_count) {
+				DBG(3, "VIDIOC_S_FMT failed. Unmap the "
+				       "buffers first.");
+				return -EINVAL;
+			}
+
+	if (cam->stream == STREAM_ON)
+		if ((err = sn9c102_stream_interrupt(cam)))
+			return err;
+
+	if (copy_to_user(arg, &format, sizeof(format))) {
+		cam->stream = stream;
+		return -EFAULT;
+	}
+
+	if (cam->module_param.force_munmap  || cam->io == IO_READ)
+		sn9c102_release_buffers(cam);
+
+	err += sn9c102_set_pix_format(cam, pix);
+	err += sn9c102_set_crop(cam, &rect);
+	if (s->set_pix_format)
+		err += s->set_pix_format(cam, pix);
+	if (s->set_crop)
+		err += s->set_crop(cam, &rect);
+	err += sn9c102_set_scale(cam, scale);
+
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	memcpy(pfmt, pix, sizeof(*pix));
+	memcpy(&(s->_rect), &rect, sizeof(rect));
+
+	if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
+	    nbuffers != sn9c102_request_buffers(cam, nbuffers, cam->io)) {
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To "
+		       "use the camera, close and open /dev/video%d again.",
+		    cam->v4ldev->minor);
+		return -ENOMEM;
+	}
+
+	if (cam->io == IO_READ)
+		sn9c102_empty_framequeues(cam);
+	else if (cam->module_param.force_munmap)
+		sn9c102_requeue_outqueue(cam);
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_jpegcomp(struct sn9c102_device* cam, void __user * arg)
+{
+	if (copy_to_user(arg, &cam->compression,
+	                 sizeof(cam->compression)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_jpegcomp(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_jpegcompression jc;
+	const enum sn9c102_stream_state stream = cam->stream;
+	int err = 0;
+
+	if (copy_from_user(&jc, arg, sizeof(jc)))
+		return -EFAULT;
+
+	if (jc.quality != 0 && jc.quality != 1)
+		return -EINVAL;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = sn9c102_stream_interrupt(cam)))
+			return err;
+
+	err += sn9c102_set_compression(cam, &jc);
+	if (err) { /* atomic, no rollback in ioctl() */
+		cam->state |= DEV_MISCONFIGURED;
+		DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
+		       "problems. To use the camera, close and open "
+		       "/dev/video%d again.", cam->v4ldev->minor);
+		return -EIO;
+	}
+
+	cam->compression.quality = jc.quality;
+
+	cam->stream = stream;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_reqbufs(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_requestbuffers rb;
+	u32 i;
+	int err;
+
+	if (copy_from_user(&rb, arg, sizeof(rb)))
+		return -EFAULT;
+
+	if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    rb.memory != V4L2_MEMORY_MMAP)
+		return -EINVAL;
+
+	if (cam->io == IO_READ) {
+		DBG(3, "Close and open the device again to choose the mmap "
+		       "I/O method");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cam->nbuffers; i++)
+		if (cam->frame[i].vma_use_count) {
+			DBG(3, "VIDIOC_REQBUFS failed. Previous buffers are "
+			       "still mapped.");
+			return -EINVAL;
+		}
+
+	if (cam->stream == STREAM_ON)
+		if ((err = sn9c102_stream_interrupt(cam)))
+			return err;
+
+	sn9c102_empty_framequeues(cam);
+
+	sn9c102_release_buffers(cam);
+	if (rb.count)
+		rb.count = sn9c102_request_buffers(cam, rb.count, IO_MMAP);
+
+	if (copy_to_user(arg, &rb, sizeof(rb))) {
+		sn9c102_release_buffers(cam);
+		cam->io = IO_NONE;
+		return -EFAULT;
+	}
+
+	cam->io = rb.count ? IO_MMAP : IO_NONE;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_querybuf(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_buffer b;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
+
+	if (cam->frame[b.index].vma_use_count)
+		b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+	if (cam->frame[b.index].state == F_DONE)
+		b.flags |= V4L2_BUF_FLAG_DONE;
+	else if (cam->frame[b.index].state != F_UNUSED)
+		b.flags |= V4L2_BUF_FLAG_QUEUED;
+
+	if (copy_to_user(arg, &b, sizeof(b)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_qbuf(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_buffer b;
+	unsigned long lock_flags;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+	    b.index >= cam->nbuffers || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (cam->frame[b.index].state != F_UNUSED)
+		return -EINVAL;
+
+	cam->frame[b.index].state = F_QUEUED;
+
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	PDBGG("Frame #%lu queued", (unsigned long)b.index);
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_dqbuf(struct sn9c102_device* cam, struct file* filp,
+                     void __user * arg)
+{
+	struct v4l2_buffer b;
+	struct sn9c102_frame_t *f;
+	unsigned long lock_flags;
+	int err = 0;
+
+	if (copy_from_user(&b, arg, sizeof(b)))
+		return -EFAULT;
+
+	if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (list_empty(&cam->outqueue)) {
+		if (cam->stream == STREAM_OFF)
+			return -EINVAL;
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		err = wait_event_interruptible
+		      ( cam->wait_frame,
+		        (!list_empty(&cam->outqueue)) ||
+		        (cam->state & DEV_DISCONNECTED) ||
+		        (cam->state & DEV_MISCONFIGURED) );
+		if (err)
+			return err;
+		if (cam->state & DEV_DISCONNECTED)
+			return -ENODEV;
+		if (cam->state & DEV_MISCONFIGURED)
+			return -EIO;
+	}
+
+	spin_lock_irqsave(&cam->queue_lock, lock_flags);
+	f = list_entry(cam->outqueue.next, struct sn9c102_frame_t, frame);
+	list_del(cam->outqueue.next);
+	spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
+
+	f->state = F_UNUSED;
+
+	memcpy(&b, &f->buf, sizeof(b));
+	if (f->vma_use_count)
+		b.flags |= V4L2_BUF_FLAG_MAPPED;
+
+	if (copy_to_user(arg, &b, sizeof(b)))
+		return -EFAULT;
+
+	PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index);
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_streamon(struct sn9c102_device* cam, void __user * arg)
+{
+	int type;
+
+	if (copy_from_user(&type, arg, sizeof(type)))
+		return -EFAULT;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (list_empty(&cam->inqueue))
+		return -EINVAL;
+
+	cam->stream = STREAM_ON;
+
+	DBG(3, "Stream on");
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_streamoff(struct sn9c102_device* cam, void __user * arg)
+{
+	int type, err;
+
+	if (copy_from_user(&type, arg, sizeof(type)))
+		return -EFAULT;
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
+		return -EINVAL;
+
+	if (cam->stream == STREAM_ON)
+		if ((err = sn9c102_stream_interrupt(cam)))
+			return err;
+
+	sn9c102_empty_framequeues(cam);
+
+	DBG(3, "Stream off");
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_g_parm(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_streamparm sp;
+
+	if (copy_from_user(&sp, arg, sizeof(sp)))
+		return -EFAULT;
+
+	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp.parm.capture.extendedmode = 0;
+	sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+	if (copy_to_user(arg, &sp, sizeof(sp)))
+		return -EFAULT;
+
+	return 0;
+}
+
+
+static int
+sn9c102_vidioc_s_parm(struct sn9c102_device* cam, void __user * arg)
+{
+	struct v4l2_streamparm sp;
+
+	if (copy_from_user(&sp, arg, sizeof(sp)))
+		return -EFAULT;
+
+	if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	sp.parm.capture.extendedmode = 0;
+
+	if (sp.parm.capture.readbuffers == 0)
+		sp.parm.capture.readbuffers = cam->nreadbuffers;
+
+	if (sp.parm.capture.readbuffers > SN9C102_MAX_FRAMES)
+		sp.parm.capture.readbuffers = SN9C102_MAX_FRAMES;
+
+	if (copy_to_user(arg, &sp, sizeof(sp)))
+		return -EFAULT;
+
+	cam->nreadbuffers = sp.parm.capture.readbuffers;
+
+	return 0;
+}
+
 
 static int sn9c102_ioctl_v4l2(struct inode* inode, struct file* filp,
                               unsigned int cmd, void __user * arg)
@@ -1751,729 +2565,75 @@
 	switch (cmd) {
 
 	case VIDIOC_QUERYCAP:
-	{
-		struct v4l2_capability cap = {
-			.driver = "sn9c102",
-			.version = SN9C102_MODULE_VERSION_CODE,
-			.capabilities = V4L2_CAP_VIDEO_CAPTURE | 
-			                V4L2_CAP_READWRITE |
-			                V4L2_CAP_STREAMING,
-		};
-
-		strlcpy(cap.card, cam->v4ldev->name, sizeof(cap.card));
-		if (usb_make_path(cam->usbdev, cap.bus_info,
-		    sizeof(cap.bus_info)) < 0)
-			strlcpy(cap.bus_info, cam->dev.bus_id,
-			        sizeof(cap.bus_info));
-
-		if (copy_to_user(arg, &cap, sizeof(cap)))
-			return -EFAULT;
-
-		return 0;
-	}
+		return sn9c102_vidioc_querycap(cam, arg);
 
 	case VIDIOC_ENUMINPUT:
-	{
-		struct v4l2_input i;
-
-		if (copy_from_user(&i, arg, sizeof(i)))
-			return -EFAULT;
-
-		if (i.index)
-			return -EINVAL;
-
-		memset(&i, 0, sizeof(i));
-		strcpy(i.name, "USB");
-
-		if (copy_to_user(arg, &i, sizeof(i)))
-			return -EFAULT;
-
-		return 0;
-	}
+		return sn9c102_vidioc_enuminput(cam, arg);
 
 	case VIDIOC_G_INPUT:
 	case VIDIOC_S_INPUT:
-	{
-		int index;
-
-		if (copy_from_user(&index, arg, sizeof(index)))
-			return -EFAULT;
-
-		if (index != 0)
-			return -EINVAL;
-
-		return 0;
-	}
+		return sn9c102_vidioc_gs_input(cam, arg);
 
 	case VIDIOC_QUERYCTRL:
-	{
-		struct sn9c102_sensor* s = cam->sensor;
-		struct v4l2_queryctrl qc;
-		u8 i;
-
-		if (copy_from_user(&qc, arg, sizeof(qc)))
-			return -EFAULT;
-
-		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
-			if (qc.id && qc.id == s->qctrl[i].id) {
-				memcpy(&qc, &(s->qctrl[i]), sizeof(qc));
-				if (copy_to_user(arg, &qc, sizeof(qc)))
-					return -EFAULT;
-				return 0;
-			}
-
-		return -EINVAL;
-	}
+		return sn9c102_vidioc_query_ctrl(cam, arg);
 
 	case VIDIOC_G_CTRL:
-	{
-		struct sn9c102_sensor* s = cam->sensor;
-		struct v4l2_control ctrl;
-		int err = 0;
-
-		if (!s->get_ctrl)
-			return -EINVAL;
-
-		if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
-			return -EFAULT;
-
-		err = s->get_ctrl(cam, &ctrl);
-
-		if (copy_to_user(arg, &ctrl, sizeof(ctrl)))
-			return -EFAULT;
-
-		return err;
-	}
+		return sn9c102_vidioc_g_ctrl(cam, arg);
 
 	case VIDIOC_S_CTRL_OLD:
 	case VIDIOC_S_CTRL:
-	{
-		struct sn9c102_sensor* s = cam->sensor;
-		struct v4l2_control ctrl;
-		u8 i;
-		int err = 0;
+		return sn9c102_vidioc_s_ctrl(cam, arg);
 
-		if (!s->set_ctrl)
-			return -EINVAL;
-
-		if (copy_from_user(&ctrl, arg, sizeof(ctrl)))
-			return -EFAULT;
-
-		for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
-			if (ctrl.id == s->qctrl[i].id) {
-				if (ctrl.value < s->qctrl[i].minimum ||
-				    ctrl.value > s->qctrl[i].maximum)
-					return -ERANGE;
-				ctrl.value -= ctrl.value % s->qctrl[i].step;
-				break;
-			}
-
-		if ((err = s->set_ctrl(cam, &ctrl)))
-			return err;
-
-		s->_qctrl[i].default_value = ctrl.value;
-
-		PDBGG("VIDIOC_S_CTRL: id %lu, value %lu",
-		      (unsigned long)ctrl.id, (unsigned long)ctrl.value)
-
-		return 0;
-	}
-
+	case VIDIOC_CROPCAP_OLD:
 	case VIDIOC_CROPCAP:
-	{
-		struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
-
-		cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		cc->pixelaspect.numerator = 1;
-		cc->pixelaspect.denominator = 1;
-
-		if (copy_to_user(arg, cc, sizeof(*cc)))
-			return -EFAULT;
-
-		return 0;
-	}
+		return sn9c102_vidioc_cropcap(cam, arg);
 
 	case VIDIOC_G_CROP:
-	{
-		struct sn9c102_sensor* s = cam->sensor;
-		struct v4l2_crop crop = {
-			.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
-		};
-
-		memcpy(&(crop.c), &(s->_rect), sizeof(struct v4l2_rect));
-
-		if (copy_to_user(arg, &crop, sizeof(crop)))
-			return -EFAULT;
-
-		return 0;
-	}
+		return sn9c102_vidioc_g_crop(cam, arg);
 
 	case VIDIOC_S_CROP:
-	{
-		struct sn9c102_sensor* s = cam->sensor;
-		struct v4l2_crop crop;
-		struct v4l2_rect* rect;
-		struct v4l2_rect* bounds = &(s->cropcap.bounds);
-		struct v4l2_pix_format* pix_format = &(s->pix_format);
-		u8 scale;
-		const enum sn9c102_stream_state stream = cam->stream;
-		const u32 nbuffers = cam->nbuffers;
-		u32 i;
-		int err = 0;
-
-		if (copy_from_user(&crop, arg, sizeof(crop)))
-			return -EFAULT;
-
-		rect = &(crop.c);
-
-		if (crop.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-			return -EINVAL;
-
-		if (cam->module_param.force_munmap)
-			for (i = 0; i < cam->nbuffers; i++)
-				if (cam->frame[i].vma_use_count) {
-					DBG(3, "VIDIOC_S_CROP failed. "
-					       "Unmap the buffers first.")
-					return -EINVAL;
-				}
-
-		/* Preserve R,G or B origin */
-		rect->left = (s->_rect.left & 1L) ?
-		             rect->left | 1L : rect->left & ~1L;
-		rect->top = (s->_rect.top & 1L) ?
-		            rect->top | 1L : rect->top & ~1L;
-
-		if (rect->width < 16)
-			rect->width = 16;
-		if (rect->height < 16)
-			rect->height = 16;
-		if (rect->width > bounds->width)
-			rect->width = bounds->width;
-		if (rect->height > bounds->height)
-			rect->height = bounds->height;
-		if (rect->left < bounds->left)
-			rect->left = bounds->left;
-		if (rect->top < bounds->top)
-			rect->top = bounds->top;
-		if (rect->left + rect->width > bounds->left + bounds->width)
-			rect->left = bounds->left+bounds->width - rect->width;
-		if (rect->top + rect->height > bounds->top + bounds->height)
-			rect->top = bounds->top+bounds->height - rect->height;
-
-		rect->width &= ~15L;
-		rect->height &= ~15L;
-
-		if (SN9C102_PRESERVE_IMGSCALE) {
-			/* Calculate the actual scaling factor */
-			u32 a, b;
-			a = rect->width * rect->height;
-			b = pix_format->width * pix_format->height;
-			scale = b ? (u8)((a / b) < 4 ? 1 :
-		                        ((a / b) < 16 ? 2 : 4)) : 1;
-		} else
-			scale = 1;
-
-		if (cam->stream == STREAM_ON)
-			if ((err = sn9c102_stream_interrupt(cam)))
-				return err;
-
-		if (copy_to_user(arg, &crop, sizeof(crop))) {
-			cam->stream = stream;
-			return -EFAULT;
-		}
-
-		if (cam->module_param.force_munmap || cam->io == IO_READ)
-			sn9c102_release_buffers(cam);
-
-		err = sn9c102_set_crop(cam, rect);
-		if (s->set_crop)
-			err += s->set_crop(cam, rect);
-		err += sn9c102_set_scale(cam, scale);
-
-		if (err) { /* atomic, no rollback in ioctl() */
-			cam->state |= DEV_MISCONFIGURED;
-			DBG(1, "VIDIOC_S_CROP failed because of hardware "
-			       "problems. To use the camera, close and open "
-			       "/dev/video%d again.", cam->v4ldev->minor)
-			return -EIO;
-		}
-
-		s->pix_format.width = rect->width/scale;
-		s->pix_format.height = rect->height/scale;
-		memcpy(&(s->_rect), rect, sizeof(*rect));
-
-		if ((cam->module_param.force_munmap || cam->io == IO_READ) &&
-		    nbuffers != sn9c102_request_buffers(cam, nbuffers,
-		                                        cam->io)) {
-			cam->state |= DEV_MISCONFIGURED;
-			DBG(1, "VIDIOC_S_CROP failed because of not enough "
-			       "memory. To use the camera, close and open "
-			       "/dev/video%d again.", cam->v4ldev->minor)
-			return -ENOMEM;
-		}
-
-		cam->stream = stream;
-
-		return 0;
-	}
+		return sn9c102_vidioc_s_crop(cam, arg);
 
 	case VIDIOC_ENUM_FMT:
-	{
-		struct v4l2_fmtdesc fmtd;
-
-		if (copy_from_user(&fmtd, arg, sizeof(fmtd)))
-			return -EFAULT;
-
-		if (fmtd.index == 0) {
-			strcpy(fmtd.description, "bayer rgb");
-			fmtd.pixelformat = V4L2_PIX_FMT_SBGGR8;
-		} else if (fmtd.index == 1) {
-			strcpy(fmtd.description, "compressed");
-			fmtd.pixelformat = V4L2_PIX_FMT_SN9C10X;
-			fmtd.flags = V4L2_FMT_FLAG_COMPRESSED;
-		} else
-			return -EINVAL;
-
-		fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-		memset(&fmtd.reserved, 0, sizeof(fmtd.reserved));
-
-		if (copy_to_user(arg, &fmtd, sizeof(fmtd)))
-			return -EFAULT;
-
-		return 0;
-	}
+		return sn9c102_vidioc_enum_fmt(cam, arg);
 
 	case VIDIOC_G_FMT:
-	{
-		struct v4l2_format format;
-		struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
-
-		if (copy_from_user(&format, arg, sizeof(format)))
-			return -EFAULT;
-
-		if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-			return -EINVAL;
-
-		pfmt->bytesperline = (pfmt->pixelformat==V4L2_PIX_FMT_SN9C10X)
-		                     ? 0 : (pfmt->width * pfmt->priv) / 8;
-		pfmt->sizeimage = pfmt->height * ((pfmt->width*pfmt->priv)/8);
-		pfmt->field = V4L2_FIELD_NONE;
-		memcpy(&(format.fmt.pix), pfmt, sizeof(*pfmt));
-
-		if (copy_to_user(arg, &format, sizeof(format)))
-			return -EFAULT;
-
-		return 0;
-	}
+		return sn9c102_vidioc_g_fmt(cam, arg);
 
 	case VIDIOC_TRY_FMT:
 	case VIDIOC_S_FMT:
-	{
-		struct sn9c102_sensor* s = cam->sensor;
-		struct v4l2_format format;
-		struct v4l2_pix_format* pix;
-		struct v4l2_pix_format* pfmt = &(s->pix_format);
-		struct v4l2_rect* bounds = &(s->cropcap.bounds);
-		struct v4l2_rect rect;
-		u8 scale;
-		const enum sn9c102_stream_state stream = cam->stream;
-		const u32 nbuffers = cam->nbuffers;
-		u32 i;
-		int err = 0;
-
-		if (copy_from_user(&format, arg, sizeof(format)))
-			return -EFAULT;
-
-		pix = &(format.fmt.pix);
-
-		if (format.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-			return -EINVAL;
-
-		memcpy(&rect, &(s->_rect), sizeof(rect));
-
-		{ /* calculate the actual scaling factor */
-			u32 a, b;
-			a = rect.width * rect.height;
-			b = pix->width * pix->height;
-			scale = b ? (u8)((a / b) < 4 ? 1 :
-		                        ((a / b) < 16 ? 2 : 4)) : 1;
-		}
-
-		rect.width = scale * pix->width;
-		rect.height = scale * pix->height;
-
-		if (rect.width < 16)
-			rect.width = 16;
-		if (rect.height < 16)
-			rect.height = 16;
-		if (rect.width > bounds->left + bounds->width - rect.left)
-			rect.width = bounds->left + bounds->width - rect.left;
-		if (rect.height > bounds->top + bounds->height - rect.top)
-			rect.height = bounds->top + bounds->height - rect.top;
-
-		rect.width &= ~15L;
-		rect.height &= ~15L;
-
-		{ /* adjust the scaling factor */
-			u32 a, b;
-			a = rect.width * rect.height;
-			b = pix->width * pix->height;
-			scale = b ? (u8)((a / b) < 4 ? 1 :
-		                        ((a / b) < 16 ? 2 : 4)) : 1;
-		}
-
-		pix->width = rect.width / scale;
-		pix->height = rect.height / scale;
-
-		if (pix->pixelformat != V4L2_PIX_FMT_SN9C10X &&
-		    pix->pixelformat != V4L2_PIX_FMT_SBGGR8)
-			pix->pixelformat = pfmt->pixelformat;
-		pix->priv = pfmt->priv; /* bpp */
-		pix->colorspace = pfmt->colorspace;
-		pix->bytesperline = (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
-		                    ? 0 : (pix->width * pix->priv) / 8;
-		pix->sizeimage = pix->height * ((pix->width * pix->priv) / 8);
-		pix->field = V4L2_FIELD_NONE;
-
-		if (cmd == VIDIOC_TRY_FMT) {
-			if (copy_to_user(arg, &format, sizeof(format)))
-				return -EFAULT;
-			return 0;
-		}
-
-		if (cam->module_param.force_munmap)
-			for (i = 0; i < cam->nbuffers; i++)
-				if (cam->frame[i].vma_use_count) {
-					DBG(3, "VIDIOC_S_FMT failed. "
-					       "Unmap the buffers first.")
-					return -EINVAL;
-				}
-
-		if (cam->stream == STREAM_ON)
-			if ((err = sn9c102_stream_interrupt(cam)))
-				return err;
-
-		if (copy_to_user(arg, &format, sizeof(format))) {
-			cam->stream = stream;
-			return -EFAULT;
-		}
-
-		if (cam->module_param.force_munmap  || cam->io == IO_READ)
-			sn9c102_release_buffers(cam);
-
-		err += sn9c102_set_pix_format(cam, pix);
-		err += sn9c102_set_crop(cam, &rect);
-		if (s->set_pix_format)
-			err += s->set_pix_format(cam, pix);
-		if (s->set_crop)
-			err += s->set_crop(cam, &rect);
-		err += sn9c102_set_scale(cam, scale);
-
-		if (err) { /* atomic, no rollback in ioctl() */
-			cam->state |= DEV_MISCONFIGURED;
-			DBG(1, "VIDIOC_S_FMT failed because of hardware "
-			       "problems. To use the camera, close and open "
-			       "/dev/video%d again.", cam->v4ldev->minor)
-			return -EIO;
-		}
-
-		memcpy(pfmt, pix, sizeof(*pix));
-		memcpy(&(s->_rect), &rect, sizeof(rect));
-
-		if ((cam->module_param.force_munmap  || cam->io == IO_READ) &&
-		    nbuffers != sn9c102_request_buffers(cam, nbuffers,
-		                                        cam->io)) {
-			cam->state |= DEV_MISCONFIGURED;
-			DBG(1, "VIDIOC_S_FMT failed because of not enough "
-			       "memory. To use the camera, close and open "
-			       "/dev/video%d again.", cam->v4ldev->minor)
-			return -ENOMEM;
-		}
-
-		cam->stream = stream;
-
-		return 0;
-	}
+		return sn9c102_vidioc_try_s_fmt(cam, cmd, arg);
 
 	case VIDIOC_G_JPEGCOMP:
-	{
-		if (copy_to_user(arg, &cam->compression,
-		                 sizeof(cam->compression)))
-			return -EFAULT;
-
-		return 0;
-	}
+		return sn9c102_vidioc_g_jpegcomp(cam, arg);
 
 	case VIDIOC_S_JPEGCOMP:
-	{
-		struct v4l2_jpegcompression jc;
-		const enum sn9c102_stream_state stream = cam->stream;
-		int err = 0;
-
-		if (copy_from_user(&jc, arg, sizeof(jc)))
-			return -EFAULT;
-
-		if (jc.quality != 0 && jc.quality != 1)
-			return -EINVAL;
-
-		if (cam->stream == STREAM_ON)
-			if ((err = sn9c102_stream_interrupt(cam)))
-				return err;
-
-		err += sn9c102_set_compression(cam, &jc);
-		if (err) { /* atomic, no rollback in ioctl() */
-			cam->state |= DEV_MISCONFIGURED;
-			DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware "
-			       "problems. To use the camera, close and open "
-			       "/dev/video%d again.", cam->v4ldev->minor)
-			return -EIO;
-		}
-
-		cam->compression.quality = jc.quality;
-
-		cam->stream = stream;
-
-		return 0;
-	}
+		return sn9c102_vidioc_s_jpegcomp(cam, arg);
 
 	case VIDIOC_REQBUFS:
-	{
-		struct v4l2_requestbuffers rb;
-		u32 i;
-		int err;
-
-		if (copy_from_user(&rb, arg, sizeof(rb)))
-			return -EFAULT;
-
-		if (rb.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
-		    rb.memory != V4L2_MEMORY_MMAP)
-			return -EINVAL;
-
-		if (cam->io == IO_READ) {
-			DBG(3, "Close and open the device again to choose "
-			       "the mmap I/O method")
-			return -EINVAL;
-		}
-
-		for (i = 0; i < cam->nbuffers; i++)
-			if (cam->frame[i].vma_use_count) {
-				DBG(3, "VIDIOC_REQBUFS failed. "
-				       "Previous buffers are still mapped.")
-				return -EINVAL;
-			}
-
-		if (cam->stream == STREAM_ON)
-			if ((err = sn9c102_stream_interrupt(cam)))
-				return err;
-
-		sn9c102_empty_framequeues(cam);
-
-		sn9c102_release_buffers(cam);
-		if (rb.count)
-			rb.count = sn9c102_request_buffers(cam, rb.count,
-			                                   IO_MMAP);
-
-		if (copy_to_user(arg, &rb, sizeof(rb))) {
-			sn9c102_release_buffers(cam);
-			cam->io = IO_NONE;
-			return -EFAULT;
-		}
-
-		cam->io = rb.count ? IO_MMAP : IO_NONE;
-
-		return 0;
-	}
+		return sn9c102_vidioc_reqbufs(cam, arg);
 
 	case VIDIOC_QUERYBUF:
-	{
-		struct v4l2_buffer b;
-
-		if (copy_from_user(&b, arg, sizeof(b)))
-			return -EFAULT;
-
-		if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
-		    b.index >= cam->nbuffers || cam->io != IO_MMAP)
-			return -EINVAL;
-
-		memcpy(&b, &cam->frame[b.index].buf, sizeof(b));
-
-		if (cam->frame[b.index].vma_use_count)
-			b.flags |= V4L2_BUF_FLAG_MAPPED;
-
-		if (cam->frame[b.index].state == F_DONE)
-			b.flags |= V4L2_BUF_FLAG_DONE;
-		else if (cam->frame[b.index].state != F_UNUSED)
-			b.flags |= V4L2_BUF_FLAG_QUEUED;
-
-		if (copy_to_user(arg, &b, sizeof(b)))
-			return -EFAULT;
-
-		return 0;
-	}
+		return sn9c102_vidioc_querybuf(cam, arg);
 
 	case VIDIOC_QBUF:
-	{
-		struct v4l2_buffer b;
-		unsigned long lock_flags;
-
-		if (copy_from_user(&b, arg, sizeof(b)))
-			return -EFAULT;
-
-		if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
-		    b.index >= cam->nbuffers || cam->io != IO_MMAP)
-			return -EINVAL;
-
-		if (cam->frame[b.index].state != F_UNUSED)
-			return -EINVAL;
-
-		cam->frame[b.index].state = F_QUEUED;
-
-		spin_lock_irqsave(&cam->queue_lock, lock_flags);
-		list_add_tail(&cam->frame[b.index].frame, &cam->inqueue);
-		spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
-		PDBGG("Frame #%lu queued", (unsigned long)b.index)
-
-		return 0;
-	}
+		return sn9c102_vidioc_qbuf(cam, arg);
 
 	case VIDIOC_DQBUF:
-	{
-		struct v4l2_buffer b;
-		struct sn9c102_frame_t *f;
-		unsigned long lock_flags;
-		int err = 0;
-
-		if (copy_from_user(&b, arg, sizeof(b)))
-			return -EFAULT;
-
-		if (b.type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io!= IO_MMAP)
-			return -EINVAL;
-
-		if (list_empty(&cam->outqueue)) {
-			if (cam->stream == STREAM_OFF)
-				return -EINVAL;
-			if (filp->f_flags & O_NONBLOCK)
-				return -EAGAIN;
-			err = wait_event_interruptible
-			      ( cam->wait_frame, 
-			        (!list_empty(&cam->outqueue)) ||
-			        (cam->state & DEV_DISCONNECTED) ||
-			        (cam->state & DEV_MISCONFIGURED) );
-			if (err)
-				return err;
-			if (cam->state & DEV_DISCONNECTED)
-				return -ENODEV;
-			if (cam->state & DEV_MISCONFIGURED)
-				return -EIO;
-		}
-
-		spin_lock_irqsave(&cam->queue_lock, lock_flags);
-		f = list_entry(cam->outqueue.next, struct sn9c102_frame_t,
-		               frame);
-		list_del(cam->outqueue.next);
-		spin_unlock_irqrestore(&cam->queue_lock, lock_flags);
-
-		f->state = F_UNUSED;
-
-		memcpy(&b, &f->buf, sizeof(b));
-		if (f->vma_use_count)
-			b.flags |= V4L2_BUF_FLAG_MAPPED;
-
-		if (copy_to_user(arg, &b, sizeof(b)))
-			return -EFAULT;
-
-		PDBGG("Frame #%lu dequeued", (unsigned long)f->buf.index)
-
-		return 0;
-	}
+		return sn9c102_vidioc_dqbuf(cam, filp, arg);
 
 	case VIDIOC_STREAMON:
-	{
-		int type;
-
-		if (copy_from_user(&type, arg, sizeof(type)))
-			return -EFAULT;
-
-		if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
-			return -EINVAL;
-
-		if (list_empty(&cam->inqueue))
-			return -EINVAL;
-
-		cam->stream = STREAM_ON;
-
-		DBG(3, "Stream on")
-
-		return 0;
-	}
+		return sn9c102_vidioc_streamon(cam, arg);
 
 	case VIDIOC_STREAMOFF:
-	{
-		int type, err;
-
-		if (copy_from_user(&type, arg, sizeof(type)))
-			return -EFAULT;
-
-		if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE || cam->io != IO_MMAP)
-			return -EINVAL;
-
-		if (cam->stream == STREAM_ON)
-			if ((err = sn9c102_stream_interrupt(cam)))
-				return err;
-
-		sn9c102_empty_framequeues(cam);
-
-		DBG(3, "Stream off")
-
-		return 0;
-	}
+		return sn9c102_vidioc_streamoff(cam, arg);
 
 	case VIDIOC_G_PARM:
-	{
-		struct v4l2_streamparm sp;
-
-		if (copy_from_user(&sp, arg, sizeof(sp)))
-			return -EFAULT;
-
-		if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-			return -EINVAL;
-
-		sp.parm.capture.extendedmode = 0;
-		sp.parm.capture.readbuffers = cam->nreadbuffers;
-
-		if (copy_to_user(arg, &sp, sizeof(sp)))
-			return -EFAULT;
-
-		return 0;
-	}
+		return sn9c102_vidioc_g_parm(cam, arg);
 
 	case VIDIOC_S_PARM_OLD:
 	case VIDIOC_S_PARM:
-	{
-		struct v4l2_streamparm sp;
-
-		if (copy_from_user(&sp, arg, sizeof(sp)))
-			return -EFAULT;
-
-		if (sp.type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-			return -EINVAL;
-
-		sp.parm.capture.extendedmode = 0;
-
-		if (sp.parm.capture.readbuffers == 0)
-			sp.parm.capture.readbuffers = cam->nreadbuffers;
-
-		if (sp.parm.capture.readbuffers > SN9C102_MAX_FRAMES)
-			sp.parm.capture.readbuffers = SN9C102_MAX_FRAMES;
-
-		if (copy_to_user(arg, &sp, sizeof(sp)))
-			return -EFAULT;
-
-		cam->nreadbuffers = sp.parm.capture.readbuffers;
-
-		return 0;
-	}
+		return sn9c102_vidioc_s_parm(cam, arg);
 
 	case VIDIOC_G_STD:
 	case VIDIOC_S_STD:
@@ -2499,17 +2659,20 @@
 		return -ERESTARTSYS;
 
 	if (cam->state & DEV_DISCONNECTED) {
-		DBG(1, "Device not present")
+		DBG(1, "Device not present");
 		up(&cam->fileop_sem);
 		return -ENODEV;
 	}
 
 	if (cam->state & DEV_MISCONFIGURED) {
-		DBG(1, "The camera is misconfigured. Close and open it again.")
+		DBG(1, "The camera is misconfigured. Close and open it "
+		       "again.");
 		up(&cam->fileop_sem);
 		return -EIO;
 	}
 
+	V4LDBG(3, "sn9c102", cmd);
+
 	err = sn9c102_ioctl_v4l2(inode, filp, cmd, (void __user *)arg);
 
 	up(&cam->fileop_sem);
@@ -2517,9 +2680,10 @@
 	return err;
 }
 
+/*****************************************************************************/
 
 static struct file_operations sn9c102_fops = {
-	.owner =   THIS_MODULE,
+	.owner = THIS_MODULE,
 	.open =    sn9c102_open,
 	.release = sn9c102_release,
 	.ioctl =   sn9c102_ioctl,
@@ -2538,36 +2702,22 @@
 	struct usb_device *udev = interface_to_usbdev(intf);
 	struct sn9c102_device* cam;
 	static unsigned int dev_nr = 0;
-	unsigned int i, n;
+	unsigned int i;
 	int err = 0, r;
 
-	n = ARRAY_SIZE(sn9c102_id_table);
-	for (i = 0; i < n-1; i++)
-		if (le16_to_cpu(udev->descriptor.idVendor) == 
-		    sn9c102_id_table[i].idVendor &&
-		    le16_to_cpu(udev->descriptor.idProduct) ==
-		    sn9c102_id_table[i].idProduct)
-			break;
-	if (i == n-1)
-		return -ENODEV;
-
-	if (!(cam = kmalloc(sizeof(struct sn9c102_device), GFP_KERNEL)))
+	if (!(cam = kzalloc(sizeof(struct sn9c102_device), GFP_KERNEL)))
 		return -ENOMEM;
-	memset(cam, 0, sizeof(*cam));
 
 	cam->usbdev = udev;
 
-	memcpy(&cam->dev, &udev->dev, sizeof(struct device));
-
-	if (!(cam->control_buffer = kmalloc(8, GFP_KERNEL))) {
-		DBG(1, "kmalloc() failed")
+	if (!(cam->control_buffer = kzalloc(8, GFP_KERNEL))) {
+		DBG(1, "kmalloc() failed");
 		err = -ENOMEM;
 		goto fail;
 	}
-	memset(cam->control_buffer, 0, 8);
 
 	if (!(cam->v4ldev = video_device_alloc())) {
-		DBG(1, "video_device_alloc() failed")
+		DBG(1, "video_device_alloc() failed");
 		err = -ENOMEM;
 		goto fail;
 	}
@@ -2577,25 +2727,22 @@
 	r = sn9c102_read_reg(cam, 0x00);
 	if (r < 0 || r != 0x10) {
 		DBG(1, "Sorry, this is not a SN9C10x based camera "
-		       "(vid/pid 0x%04X/0x%04X)",
-		    sn9c102_id_table[i].idVendor,sn9c102_id_table[i].idProduct)
+		       "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
 		err = -ENODEV;
 		goto fail;
 	}
 
-	cam->bridge = (sn9c102_id_table[i].idProduct & 0xffc0) == 0x6080 ?
+	cam->bridge = (id->idProduct & 0xffc0) == 0x6080 ?
 	              BRIDGE_SN9C103 : BRIDGE_SN9C102;
 	switch (cam->bridge) {
 	case BRIDGE_SN9C101:
 	case BRIDGE_SN9C102:
 		DBG(2, "SN9C10[12] PC Camera Controller detected "
-		       "(vid/pid 0x%04X/0x%04X)", sn9c102_id_table[i].idVendor,
-		    sn9c102_id_table[i].idProduct)
+		       "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
 		break;
 	case BRIDGE_SN9C103:
 		DBG(2, "SN9C103 PC Camera Controller detected "
-		       "(vid/pid 0x%04X/0x%04X)", sn9c102_id_table[i].idVendor,
-		    sn9c102_id_table[i].idProduct)
+		       "(vid/pid 0x%04X/0x%04X)", id->idVendor, id->idProduct);
 		break;
 	}
 
@@ -2606,24 +2753,24 @@
 	}
 
 	if (!err && cam->sensor) {
-		DBG(2, "%s image sensor detected", cam->sensor->name)
+		DBG(2, "%s image sensor detected", cam->sensor->name);
 		DBG(3, "Support for %s maintained by %s",
-		    cam->sensor->name, cam->sensor->maintainer)
+		    cam->sensor->name, cam->sensor->maintainer);
 	} else {
-		DBG(1, "No supported image sensor detected")
+		DBG(1, "No supported image sensor detected");
 		err = -ENODEV;
 		goto fail;
 	}
 
 	if (sn9c102_init(cam)) {
-		DBG(1, "Initialization failed. I will retry on open().")
+		DBG(1, "Initialization failed. I will retry on open().");
 		cam->state |= DEV_MISCONFIGURED;
 	}
 
 	strcpy(cam->v4ldev->name, "SN9C10x PC Camera");
 	cam->v4ldev->owner = THIS_MODULE;
 	cam->v4ldev->type = VID_TYPE_CAPTURE | VID_TYPE_SCALES;
-	cam->v4ldev->hardware = VID_HARDWARE_SN9C102;
+	cam->v4ldev->hardware = 0;
 	cam->v4ldev->fops = &sn9c102_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
@@ -2634,23 +2781,25 @@
 	err = video_register_device(cam->v4ldev, VFL_TYPE_GRABBER,
 	                            video_nr[dev_nr]);
 	if (err) {
-		DBG(1, "V4L2 device registration failed")
+		DBG(1, "V4L2 device registration failed");
 		if (err == -ENFILE && video_nr[dev_nr] == -1)
-			DBG(1, "Free /dev/videoX node not found")
+			DBG(1, "Free /dev/videoX node not found");
 		video_nr[dev_nr] = -1;
 		dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
 		up(&cam->dev_sem);
 		goto fail;
 	}
 
-	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor)
+	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
 
 	cam->module_param.force_munmap = force_munmap[dev_nr];
 
 	dev_nr = (dev_nr < SN9C102_MAX_DEVICES-1) ? dev_nr+1 : 0;
 
+#ifdef CONFIG_VIDEO_ADV_DEBUG
 	sn9c102_create_sysfs(cam);
-	DBG(2, "Optional device control through 'sysfs' interface ready")
+	DBG(2, "Optional device control through 'sysfs' interface ready");
+#endif
 
 	usb_set_intfdata(intf, cam);
 
@@ -2680,14 +2829,14 @@
 
 	down(&cam->dev_sem); 
 
-	DBG(2, "Disconnecting %s...", cam->v4ldev->name)
+	DBG(2, "Disconnecting %s...", cam->v4ldev->name);
 
 	wake_up_interruptible_all(&cam->open);
 
 	if (cam->users) {
 		DBG(2, "Device /dev/video%d is open! Deregistration and "
 		       "memory deallocation are deferred on close.",
-		    cam->v4ldev->minor)
+		    cam->v4ldev->minor);
 		cam->state |= DEV_MISCONFIGURED;
 		sn9c102_stop_transfer(cam);
 		cam->state |= DEV_DISCONNECTED;
@@ -2720,11 +2869,11 @@
 {
 	int err = 0;
 
-	KDBG(2, SN9C102_MODULE_NAME " v" SN9C102_MODULE_VERSION)
-	KDBG(3, SN9C102_MODULE_AUTHOR)
+	KDBG(2, SN9C102_MODULE_NAME " v" SN9C102_MODULE_VERSION);
+	KDBG(3, SN9C102_MODULE_AUTHOR);
 
 	if ((err = usb_register(&sn9c102_usb_driver)))
-		KDBG(1, "usb_register() failed")
+		KDBG(1, "usb_register() failed");
 
 	return err;
 }
diff --git a/drivers/usb/media/sn9c102_hv7131d.c b/drivers/usb/media/sn9c102_hv7131d.c
index 18070d5..46c12ec 100644
--- a/drivers/usb/media/sn9c102_hv7131d.c
+++ b/drivers/usb/media/sn9c102_hv7131d.c
@@ -2,7 +2,7 @@
  * Plug-in for HV7131D image sensor connected to the SN9C10x PC Camera     *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
diff --git a/drivers/usb/media/sn9c102_mi0343.c b/drivers/usb/media/sn9c102_mi0343.c
index 86676ab..d9aa7a6 100644
--- a/drivers/usb/media/sn9c102_mi0343.c
+++ b/drivers/usb/media/sn9c102_mi0343.c
@@ -2,7 +2,7 @@
  * Plug-in for MI-0343 image sensor connected to the SN9C10x PC Camera     *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
diff --git a/drivers/usb/media/sn9c102_ov7630.c b/drivers/usb/media/sn9c102_ov7630.c
index d27c5ae..4a36519 100644
--- a/drivers/usb/media/sn9c102_ov7630.c
+++ b/drivers/usb/media/sn9c102_ov7630.c
@@ -2,7 +2,7 @@
  * Plug-in for OV7630 image sensor connected to the SN9C10x PC Camera      *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2005 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ * Copyright (C) 2005-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -375,8 +375,10 @@
 
 	sn9c102_attach_sensor(cam, &ov7630);
 
-	if (le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x608f &&
-	    le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602c)
+	if (le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602c &&
+	    le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602d &&
+	    le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x608f &&
+	    le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x60b0)
 		return -ENODEV;
 
 	err += sn9c102_write_reg(cam, 0x01, 0x01);
diff --git a/drivers/usb/media/sn9c102_pas106b.c b/drivers/usb/media/sn9c102_pas106b.c
index 48e3ec3..b1dee78 100644
--- a/drivers/usb/media/sn9c102_pas106b.c
+++ b/drivers/usb/media/sn9c102_pas106b.c
@@ -2,7 +2,7 @@
  * Plug-in for PAS106B image sensor connected to the SN9C10x PC Camera     *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
diff --git a/drivers/usb/media/sn9c102_sensor.h b/drivers/usb/media/sn9c102_sensor.h
index a45166c..7d953b2 100644
--- a/drivers/usb/media/sn9c102_sensor.h
+++ b/drivers/usb/media/sn9c102_sensor.h
@@ -1,7 +1,7 @@
 /***************************************************************************
  * API for image sensors connected to the SN9C10x PC Camera Controllers    *
  *                                                                         *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
@@ -92,7 +92,18 @@
 sn9c102_attach_sensor(struct sn9c102_device* cam,
                       struct sn9c102_sensor* sensor);
 
-/* Each SN9C10X camera has proper PID/VID identifiers. Add them here in case.*/
+/*
+   Each SN9C10x camera has proper PID/VID identifiers.
+   SN9C103 supports multiple interfaces, but we only handle the video class
+   interface.
+*/
+#define SN9C102_USB_DEVICE(vend, prod, intclass)                              \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |                           \
+	               USB_DEVICE_ID_MATCH_INT_CLASS,                         \
+	.idVendor = (vend),                                                   \
+	.idProduct = (prod),                                                  \
+	.bInterfaceClass = (intclass)
+
 #define SN9C102_ID_TABLE                                                      \
 static const struct usb_device_id sn9c102_id_table[] = {                      \
 	{ USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */                     \
@@ -107,33 +118,34 @@
 	{ USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */                        \
 	{ USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */                         \
 	{ USB_DEVICE(0x0c45, 0x602d), },                                      \
+	{ USB_DEVICE(0x0c45, 0x602e), }, /* OV7630 */                         \
 	{ USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */                          \
-	{ USB_DEVICE(0x0c45, 0x6080), },                                      \
-	{ USB_DEVICE(0x0c45, 0x6082), }, /* MI0343 and MI0360 */              \
-	{ USB_DEVICE(0x0c45, 0x6083), }, /* HV7131[D|E1] */                   \
-	{ USB_DEVICE(0x0c45, 0x6088), },                                      \
-	{ USB_DEVICE(0x0c45, 0x608a), },                                      \
-	{ USB_DEVICE(0x0c45, 0x608b), },                                      \
-	{ USB_DEVICE(0x0c45, 0x608c), }, /* HV7131x */                        \
-	{ USB_DEVICE(0x0c45, 0x608e), }, /* CIS-VF10 */                       \
-	{ USB_DEVICE(0x0c45, 0x608f), }, /* OV7630 */                         \
-	{ USB_DEVICE(0x0c45, 0x60a0), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60a2), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60a3), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60a8), }, /* PAS106B */                        \
-	{ USB_DEVICE(0x0c45, 0x60aa), }, /* TAS5130D1B */                     \
-	{ USB_DEVICE(0x0c45, 0x60ab), }, /* TAS5110C1B */                     \
-	{ USB_DEVICE(0x0c45, 0x60ac), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60ae), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60af), }, /* PAS202BCB */                      \
-	{ USB_DEVICE(0x0c45, 0x60b0), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60b2), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60b3), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60b8), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60ba), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60bb), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60bc), },                                      \
-	{ USB_DEVICE(0x0c45, 0x60be), },                                      \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6080, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6082, 0xff), }, /* MI0343 & MI0360 */  \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6083, 0xff), }, /* HV7131[D|E1] */     \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131x */          \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */         \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */           \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60a2, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60a3, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60a8, 0xff), }, /* PAS106B */          \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60aa, 0xff), }, /* TAS5130D1B */       \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60ab, 0xff), }, /* TAS5110C1B */       \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60ac, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60ae, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60af, 0xff), }, /* PAS202BCB */        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60b0, 0xff), }, /* OV7630 (?) */       \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60b2, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60b3, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60b8, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60ba, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60bb, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60bc, 0xff), },                        \
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60be, 0xff), },                        \
 	{ }                                                                   \
 };
 
@@ -177,16 +189,18 @@
 extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address);
 
 /* I/O on registers in the bridge. Could be used by the sensor methods too */
+extern int sn9c102_write_regs(struct sn9c102_device*, u8* buff, u16 index);
 extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index);
 extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index);
 
 /*
    NOTE: there are no exported debugging functions. To uniform the output you
    must use the dev_info()/dev_warn()/dev_err() macros defined in device.h,
-   already included here, the argument being the struct device 'dev' of the
-   sensor structure. Do NOT use these macros before the sensor is attached or
-   the kernel will crash! However, you should not need to notify the user about
-   common errors or other messages, since this is done by the master module.
+   already included here, the argument being the struct device '&usbdev->dev'
+   of the sensor structure. Do NOT use these macros before the sensor is
+   attached or the kernel will crash! However, you should not need to notify
+   the user about common errors or other messages, since this is done by the
+   master module.
 */
 
 /*****************************************************************************/
@@ -345,13 +359,6 @@
 	   error code without rolling back.
 	*/
 
-	const struct device* dev;
-	/*
-	   This is the argument for dev_err(), dev_info() and dev_warn(). It
-	   is used for debugging purposes. You must not access the struct
-	   before the sensor is attached.
-	*/
-
 	const struct usb_device* usbdev;
 	/*
 	   Points to the usb_device struct after the sensor is attached.
diff --git a/drivers/usb/media/sn9c102_tas5110c1b.c b/drivers/usb/media/sn9c102_tas5110c1b.c
index 8775999..32ddf23 100644
--- a/drivers/usb/media/sn9c102_tas5110c1b.c
+++ b/drivers/usb/media/sn9c102_tas5110c1b.c
@@ -2,7 +2,7 @@
  * Plug-in for TAS5110C1B image sensor connected to the SN9C10x PC Camera  *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
diff --git a/drivers/usb/media/sn9c102_tas5130d1b.c b/drivers/usb/media/sn9c102_tas5130d1b.c
index 927eafd..a0728f0 100644
--- a/drivers/usb/media/sn9c102_tas5130d1b.c
+++ b/drivers/usb/media/sn9c102_tas5130d1b.c
@@ -2,7 +2,7 @@
  * Plug-in for TAS5130D1B image sensor connected to the SN9C10x PC Camera  *
  * Controllers                                                             *
  *                                                                         *
- * Copyright (C) 2004-2005 by Luca Risolia <luca.risolia@studio.unibo.it>  *
+ * Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>  *
  *                                                                         *
  * This program is free software; you can redistribute it and/or modify    *
  * it under the terms of the GNU General Public License as published by    *
diff --git a/drivers/usb/media/w9968cf.c b/drivers/usb/media/w9968cf.c
index bff9434..9937fc6 100644
--- a/drivers/usb/media/w9968cf.c
+++ b/drivers/usb/media/w9968cf.c
@@ -62,7 +62,6 @@
 MODULE_SUPPORTED_DEVICE("Video");
 
 static int ovmod_load = W9968CF_OVMOD_LOAD;
-static int vppmod_load = W9968CF_VPPMOD_LOAD;
 static unsigned short simcams = W9968CF_SIMCAMS;
 static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
 static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] = 
@@ -107,7 +106,6 @@
 
 #ifdef CONFIG_KMOD
 module_param(ovmod_load, bool, 0644);
-module_param(vppmod_load, bool, 0444);
 #endif
 module_param(simcams, ushort, 0644);
 module_param_array(video_nr, short, &param_nv[0], 0444);
@@ -150,18 +148,6 @@
                  "\ninto memory."
                  "\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"."
                  "\n");
-MODULE_PARM_DESC(vppmod_load, 
-                 "\n<0|1> Automatic 'w9968cf-vpp' module loading."
-                 "\n0 disabled, 1 enabled."
-                 "\nIf enabled, every time an application attempts to open a"
-                 "\ncamera, 'insmod' searches for the video post-processing"
-                 "\nmodule in the system and loads it automatically (if"
-                 "\npresent). The optional 'w9968cf-vpp' module adds extra"
-                 "\n image manipulation functions to the 'w9968cf' module,like"
-                 "\nsoftware up-scaling,colour conversions and video decoding"
-                 "\nfor very high frame rates."
-                 "\nDefault value is "__MODULE_STRING(W9968CF_VPPMOD_LOAD)"."
-                 "\n");
 #endif
 MODULE_PARM_DESC(simcams, 
                  "\n<n> Number of cameras allowed to stream simultaneously."
@@ -492,10 +478,6 @@
 static void w9968cf_pop_frame(struct w9968cf_device*,struct w9968cf_frame_t**);
 static void w9968cf_release_resources(struct w9968cf_device*);
 
-/* Intermodule communication */
-static int w9968cf_vppmod_detect(struct w9968cf_device*);
-static void w9968cf_vppmod_release(struct w9968cf_device*);
-
 
 
 /****************************************************************************
@@ -2737,9 +2719,7 @@
 	cam->streaming = 0;
 	cam->misconfigured = 0;
 
-	if (!w9968cf_vpp)
-		if ((err = w9968cf_vppmod_detect(cam)))
-			goto out;
+	w9968cf_adjust_configuration(cam);
 
 	if ((err = w9968cf_allocate_memory(cam)))
 		goto deallocate_memory;
@@ -2766,7 +2746,6 @@
 
 deallocate_memory:
 	w9968cf_deallocate_memory(cam);
-out:
 	DBG(2, "Failed to open the video device")
 	up(&cam->dev_sem);
 	up_read(&w9968cf_disconnect);
@@ -2784,8 +2763,6 @@
 
 	w9968cf_stop_transfer(cam);
 
-	w9968cf_vppmod_release(cam);
-
 	if (cam->disconnected) {
 		w9968cf_release_resources(cam);
 		up(&cam->dev_sem);
@@ -3681,106 +3658,6 @@
  * Module init, exit and intermodule communication                          *
  ****************************************************************************/
 
-static int w9968cf_vppmod_detect(struct w9968cf_device* cam)
-{
-	if (!w9968cf_vpp)
-		if (vppmod_load)
-			request_module("w9968cf-vpp");
-
-	down(&w9968cf_vppmod_lock);
-
-	if (!w9968cf_vpp) {
-		DBG(4, "Video post-processing module not detected")
-		w9968cf_adjust_configuration(cam);
-		goto out;
-	}
-
-	if (!try_module_get(w9968cf_vpp->owner)) {
-		DBG(1, "Couldn't increment the reference count of "
-		       "the video post-processing module")
-		up(&w9968cf_vppmod_lock);
-		return -ENOSYS;
-	}
-
-	w9968cf_vpp->busy++;
-
-	DBG(5, "Video post-processing module detected")
-
-out:
-	up(&w9968cf_vppmod_lock);
-	return 0;
-}
-
-
-static void w9968cf_vppmod_release(struct w9968cf_device* cam)
-{
-	down(&w9968cf_vppmod_lock);
-
-	if (w9968cf_vpp && w9968cf_vpp->busy) {
-		module_put(w9968cf_vpp->owner);
-		w9968cf_vpp->busy--;
-		wake_up(&w9968cf_vppmod_wait);
-		DBG(5, "Video post-processing module released")
-	}
-
-	up(&w9968cf_vppmod_lock);
-}
-
-
-int w9968cf_vppmod_register(struct w9968cf_vpp_t* vpp)
-{
-	down(&w9968cf_vppmod_lock);
-
-	if (w9968cf_vpp) {
-		KDBG(1, "Video post-processing module already registered")
-		up(&w9968cf_vppmod_lock);
-		return -EINVAL;
-	}
-
-	w9968cf_vpp = vpp;
-	w9968cf_vpp->busy = 0;
-
-	KDBG(2, "Video post-processing module registered")
-	up(&w9968cf_vppmod_lock);
-	return 0;
-}
-
-
-int w9968cf_vppmod_deregister(struct w9968cf_vpp_t* vpp)
-{
-	down(&w9968cf_vppmod_lock);
-
-	if (!w9968cf_vpp) {
-		up(&w9968cf_vppmod_lock);
-		return -EINVAL;
-	}
-
-	if (w9968cf_vpp != vpp) {
-		KDBG(1, "Only the owner can unregister the video "
-		        "post-processing module")
-		up(&w9968cf_vppmod_lock);
-		return -EINVAL;
-	}
-
-	if (w9968cf_vpp->busy) {
-		KDBG(2, "Video post-processing module busy. Wait for it to be "
-		        "released...")
-		up(&w9968cf_vppmod_lock);
-		wait_event(w9968cf_vppmod_wait, !w9968cf_vpp->busy);
-		w9968cf_vpp = NULL;
-		goto out;
-	}
-
-	w9968cf_vpp = NULL;
-
-	up(&w9968cf_vppmod_lock);
-
-out:
-	KDBG(2, "Video post-processing module unregistered")
-	return 0;
-}
-
-
 static int __init w9968cf_module_init(void)
 {
 	int err;
@@ -3810,6 +3687,3 @@
 module_init(w9968cf_module_init);
 module_exit(w9968cf_module_exit);
 
-
-EXPORT_SYMBOL(w9968cf_vppmod_register);
-EXPORT_SYMBOL(w9968cf_vppmod_deregister);
diff --git a/drivers/usb/media/w9968cf.h b/drivers/usb/media/w9968cf.h
index 8acbfe2..47a6ff7 100644
--- a/drivers/usb/media/w9968cf.h
+++ b/drivers/usb/media/w9968cf.h
@@ -195,7 +195,6 @@
 };
 
 static struct w9968cf_vpp_t* w9968cf_vpp;
-static DECLARE_MUTEX(w9968cf_vppmod_lock);
 static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait);
 
 static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */
diff --git a/drivers/usb/media/w9968cf_vpp.h b/drivers/usb/media/w9968cf_vpp.h
index 3f5317d..f3b91b7 100644
--- a/drivers/usb/media/w9968cf_vpp.h
+++ b/drivers/usb/media/w9968cf_vpp.h
@@ -37,7 +37,4 @@
 	u8 busy; /* read-only flag: module is/is not in use */
 };
 
-extern int w9968cf_vppmod_register(struct w9968cf_vpp_t*);
-extern int w9968cf_vppmod_deregister(struct w9968cf_vpp_t*);
-
 #endif /* _W9968CF_VPP_H_ */
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index 449b250..ad2f4cc 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -2093,6 +2093,8 @@
 static struct usb_device_id auerswald_ids [] = {
 	{ USB_DEVICE (ID_AUERSWALD, 0x00C0) },          /* COMpact 2104 USB */
 	{ USB_DEVICE (ID_AUERSWALD, 0x00DB) },          /* COMpact 4410/2206 USB */
+	{ USB_DEVICE (ID_AUERSWALD, 0x00DC) }, /* COMpact 4406 DSL */
+	{ USB_DEVICE (ID_AUERSWALD, 0x00DD) }, /* COMpact 2204 USB */
 	{ USB_DEVICE (ID_AUERSWALD, 0x00F1) },          /* Comfort 2000 System Telephone */
 	{ USB_DEVICE (ID_AUERSWALD, 0x00F2) },          /* Comfort 1200 System Telephone */
         { }			                        /* Terminating entry */
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 981d8a5..331d4ae 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -593,7 +593,7 @@
 
 /*
  * usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
+ * and to have the device registered with the driver core
  */
 static struct usb_class_driver ld_usb_class = {
 	.name =		"ldusb%d",
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 5411816..3094970 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -916,6 +916,10 @@
 	// Linksys USB200M Rev 2
 	USB_DEVICE (0x13b1, 0x0018),
 	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// 0Q0 cable ethernet
+	USB_DEVICE (0x1557, 0x7720),
+	.driver_info = (unsigned long) &ax88772_info,
 },
 	{ },		// END
 };
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index da46b35..dc7a069 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -32,7 +32,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.05"
+#define DRIVER_VERSION "v0.06"
 #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
 
 /*
@@ -55,11 +55,15 @@
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
-	{ USB_DEVICE(0x10C4, 0xEA60) },	/* Silicon Labs factory default */
-	{ USB_DEVICE(0x10C4, 0x80CA) },	/* Degree Controls Inc */
-	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
 	{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
-	{ USB_DEVICE(0x10AB, 0x10C5) },	/* Siemens MC60 Cable */
+	{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+	{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
 	{ } /* Terminating Entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 10bc1bf..f2b4ca8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -476,10 +476,16 @@
 	{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) },
 	{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
 	{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
 	{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 00d45f8..ca40f16 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -31,9 +31,14 @@
 #define FTDI_NF_RIC_VID	0x0DCD	/* Vendor Id */
 #define FTDI_NF_RIC_PID	0x0001	/* Product Id */
 
+
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
 
+
+/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
+#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
+
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
@@ -51,6 +56,12 @@
 #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
 
 /*
+ * PCDJ use ftdi based dj-controllers.  The following PID is for their DAC-2 device
+ * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen)
+ * (the VID is the standard ftdi vid (FTDI_VID) */
+#define FTDI_PCDJ_DAC2_PID 0xFA88
+
+/*
  * The following are the values for the Matrix Orbital LCD displays,
  * which are the FT232BM ( similar to the 8U232AM )
  */
@@ -215,8 +226,10 @@
  * Definitions for ATIK Instruments astronomical USB based cameras
  * Check it at http://www.atik-instruments.com/
  */
-#define FTDI_ATIK_ATK16_PID	0xDF30	/* ATIK ATK-16 Camera */
-#define FTDI_ATIK_ATK16HR_PID	0xDF31	/* ATIK ATK-16HR Camera */
+#define FTDI_ATIK_ATK16_PID	0xDF30	/* ATIK ATK-16 Grayscale Camera */
+#define FTDI_ATIK_ATK16C_PID	0xDF32	/* ATIK ATK-16C Colour Camera */
+#define FTDI_ATIK_ATK16HR_PID	0xDF31	/* ATIK ATK-16HR Grayscale Camera */
+#define FTDI_ATIK_ATK16HRC_PID	0xDF33	/* ATIK ATK-16HRC Colour Camera */
 
 /*
  * Protego product ids
@@ -365,6 +378,12 @@
 #define POSIFLEX_VID		0x0d3a  /* Vendor ID */
 #define POSIFLEX_PP7000_PID	0x0300  /* PP-7000II thermal printer */
 
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID	0xDC01	/* Model 8900F */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 0eb883f..e8e575e 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -73,7 +73,9 @@
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
 	{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
-	{ USB_DEVICE( NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
+	{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
+	{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID ) },
+	{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 21d434d..1807087 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -64,3 +64,10 @@
 /* Nokia CA-42 Cable */
 #define NOKIA_CA42_VENDOR_ID	0x078b
 #define NOKIA_CA42_PRODUCT_ID	0x1234
+
+/* CA-42 CLONE Cable www.ca-42.com chipset: Prolific Technology Inc */
+#define CA_42_CA42_VENDOR_ID	0x10b5
+#define CA_42_CA42_PRODUCT_ID	0xac70
+
+#define SAGEM_VENDOR_ID		0x079b
+#define SAGEM_PRODUCT_ID	0x0027
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 5b06f92..ab173b3 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -45,6 +45,12 @@
 #include "debug.h"
 #include "transport.h"
 
+#define RIO_MSC 0x08
+#define RIOP_INIT "RIOP\x00\x01\x08"
+#define RIOP_INIT_LEN 7
+#define RIO_SEND_LEN 40
+#define RIO_RECV_LEN 0x200
+
 /* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
  * mode */
 int usb_stor_euscsi_init(struct us_data *us)
@@ -91,3 +97,70 @@
 
 	return (res ? -1 : 0);
 }
+
+/* Place the Rio Karma into mass storage mode.
+ *
+ * The initialization begins by sending 40 bytes starting
+ * RIOP\x00\x01\x08\x00, which the device will ack with a 512-byte
+ * packet with the high four bits set and everything else null.
+ *
+ * Next, we send RIOP\x80\x00\x08\x00.  Each time, a 512 byte response
+ * must be read, but we must loop until byte 5 in the response is 0x08,
+ * indicating success.  */
+int rio_karma_init(struct us_data *us)
+{
+	int result, partial;
+	char *recv;
+	unsigned long timeout;
+
+	// us->iobuf is big enough to hold cmd but not receive
+	if (!(recv = kmalloc(RIO_RECV_LEN, GFP_KERNEL)))
+		goto die_nomem;
+
+	US_DEBUGP("Initializing Karma...\n");
+
+	memset(us->iobuf, 0, RIO_SEND_LEN);
+	memcpy(us->iobuf, RIOP_INIT, RIOP_INIT_LEN);
+
+	result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+		us->iobuf, RIO_SEND_LEN, &partial);
+	if (result != USB_STOR_XFER_GOOD)
+		goto die;
+
+	result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+		recv, RIO_RECV_LEN, &partial);
+	if (result != USB_STOR_XFER_GOOD)
+		goto die;
+
+	us->iobuf[4] = 0x80;
+	us->iobuf[5] = 0;
+	timeout = jiffies + msecs_to_jiffies(3000);
+	for (;;) {
+		US_DEBUGP("Sending init command\n");
+		result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+			us->iobuf, RIO_SEND_LEN, &partial);
+		if (result != USB_STOR_XFER_GOOD)
+			goto die;
+
+		result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+			recv, RIO_RECV_LEN, &partial);
+		if (result != USB_STOR_XFER_GOOD)
+			goto die;
+
+		if (recv[5] == RIO_MSC)
+			break;
+		if (time_after(jiffies, timeout))
+			goto die;
+		msleep(10);
+	}
+	US_DEBUGP("Karma initialized.\n");
+	kfree(recv);
+	return 0;
+
+die:
+	kfree(recv);
+die_nomem:
+	US_DEBUGP("Could not initialize karma.\n");
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 4c1b2bd..f9907a5 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -48,3 +48,4 @@
 /* This function is required to activate all four slots on the UCR-61S2B
  * flash reader */
 int usb_stor_ucr61s2b_init(struct us_data *us);
+int rio_karma_init(struct us_data *us);
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index b28151d..b1ec4a7 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -116,7 +116,7 @@
 static int usu_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id)
 {
-	int type;
+	unsigned long type;
 	int rc;
 	unsigned long flags;
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index dc301e5..ee958f9 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -145,6 +145,11 @@
 		US_SC_DEVICE, US_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
+UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
+		"Rio",
+		"Rio Karma",
+		US_SC_SCSI, US_PR_BULK, rio_karma_init, 0),
+
 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
 UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,
 		"Kyocera",
@@ -424,11 +429,11 @@
 		US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE | US_FL_NO_WP_DETECT ),
 
 /* This entry is needed because the device reports Sub=ff */
-UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0500, 
-               "Sony",
-               "DSC-T1", 
-               US_SC_8070, US_PR_DEVICE, NULL,
-               US_FL_SINGLE_LUN ),
+UNUSUAL_DEV(  0x054c, 0x0010, 0x0500, 0x0600,
+		"Sony",
+		"DSC-T1/T5",
+		US_SC_8070, US_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN ),
 
 
 /* Reported by wim@geeks.nl */
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 5d02f16..4de9fb5 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -234,7 +234,7 @@
 
 /* 
  * usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
+ * and to have the device registered with the driver core
  */
 static struct usb_class_driver skel_class = {
 	.name =		"skel%d",
diff --git a/drivers/video/cyblafb.c b/drivers/video/cyblafb.c
index 2b97246..0ae0a97 100644
--- a/drivers/video/cyblafb.c
+++ b/drivers/video/cyblafb.c
@@ -1665,7 +1665,6 @@
 		}
 #endif
 	output("CyblaFB version %s initializing\n", VERSION);
-	return pci_module_init(&cyblafb_pci_driver);
 	return pci_register_driver(&cyblafb_pci_driver);
 }
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 0a44072..fe1a2b0 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -406,7 +406,6 @@
 struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn);
 int pci_find_capability (struct pci_dev *dev, int cap);
 int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap);
-int pci_find_ext_capability (struct pci_dev *dev, int cap);
 struct pci_bus * pci_find_next_bus(const struct pci_bus *from);
 
 struct pci_dev *pci_get_device (unsigned int vendor, unsigned int device, struct pci_dev *from);
@@ -626,7 +625,6 @@
 static inline void pci_unregister_driver(struct pci_driver *drv) { }
 static inline int pci_find_capability (struct pci_dev *dev, int cap) {return 0; }
 static inline int pci_find_next_capability (struct pci_dev *dev, u8 post, int cap) { return 0; }
-static inline int pci_find_ext_capability (struct pci_dev *dev, int cap) {return 0; }
 static inline const struct pci_device_id *pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev) { return NULL; }
 
 /* Power management related routines */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 4401a7e..b0b908f 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -394,14 +394,9 @@
 #define PCI_DEVICE_ID_NS_SC1100_SMI	0x0511
 #define PCI_DEVICE_ID_NS_SC1100_XBUS	0x0515
 #define PCI_DEVICE_ID_NS_87410		0xd001
-#define PCI_DEVICE_ID_NS_CS5535_IDE	0x002d
 
 #define PCI_DEVICE_ID_NS_CS5535_HOST_BRIDGE  0x0028
 #define PCI_DEVICE_ID_NS_CS5535_ISA_BRIDGE   0x002b
-#define PCI_DEVICE_ID_NS_CS5535_IDE          0x002d
-#define PCI_DEVICE_ID_NS_CS5535_AUDIO        0x002e
-#define PCI_DEVICE_ID_NS_CS5535_USB          0x002f
-#define PCI_DEVICE_ID_NS_CS5535_VIDEO        0x0030
 
 #define PCI_VENDOR_ID_TSENG		0x100c
 #define PCI_DEVICE_ID_TSENG_W32P_2	0x3202
@@ -511,8 +506,6 @@
 #define PCI_DEVICE_ID_AMD_CS5536_UOC    0x2097
 #define PCI_DEVICE_ID_AMD_CS5536_IDE    0x209A
 
-#define PCI_DEVICE_ID_AMD_CS5536_IDE	0x209A
-
 #define PCI_DEVICE_ID_AMD_LX_VIDEO  0x2081
 #define PCI_DEVICE_ID_AMD_LX_AES    0x2082
 
@@ -2065,6 +2058,7 @@
 #define PCI_DEVICE_ID_INTEL_82801EB_5	0x24d5
 #define PCI_DEVICE_ID_INTEL_82801EB_6	0x24d6
 #define PCI_DEVICE_ID_INTEL_82801EB_11	0x24db
+#define PCI_DEVICE_ID_INTEL_82801EB_13	0x24dd
 #define PCI_DEVICE_ID_INTEL_ESB_1	0x25a1
 #define PCI_DEVICE_ID_INTEL_ESB_2	0x25a2
 #define PCI_DEVICE_ID_INTEL_ESB_4	0x25a4
@@ -2106,6 +2100,13 @@
 #define PCI_DEVICE_ID_INTEL_ICH7_19	0x27dd
 #define PCI_DEVICE_ID_INTEL_ICH7_20	0x27de
 #define PCI_DEVICE_ID_INTEL_ICH7_21	0x27df
+#define PCI_DEVICE_ID_INTEL_ICH8_0	0x2810
+#define PCI_DEVICE_ID_INTEL_ICH8_1	0x2811
+#define PCI_DEVICE_ID_INTEL_ICH8_2	0x2812
+#define PCI_DEVICE_ID_INTEL_ICH8_3	0x2814
+#define PCI_DEVICE_ID_INTEL_ICH8_4	0x2815
+#define PCI_DEVICE_ID_INTEL_ICH8_5	0x283e
+#define PCI_DEVICE_ID_INTEL_ICH8_6	0x2850
 #define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
 #define PCI_DEVICE_ID_INTEL_82830_HB	0x3575
 #define PCI_DEVICE_ID_INTEL_82830_CGC	0x3577
@@ -2149,6 +2150,7 @@
 #define PCI_DEVICE_ID_INTEL_82443GX_2	0x71a2
 #define PCI_DEVICE_ID_INTEL_82372FB_1	0x7601
 #define PCI_DEVICE_ID_INTEL_82454GX	0x84c4
+#define PCI_DEVICE_ID_INTEL_82450GX	0x84c5
 #define PCI_DEVICE_ID_INTEL_82451NX	0x84ca
 #define PCI_DEVICE_ID_INTEL_82454NX     0x84cb
 #define PCI_DEVICE_ID_INTEL_84460GX	0x84ea
diff --git a/include/linux/usb_ch9.h b/include/linux/usb_ch9.h
index ee21e6b..a2aacfc 100644
--- a/include/linux/usb_ch9.h
+++ b/include/linux/usb_ch9.h
@@ -535,9 +535,11 @@
 	 */
 	USB_STATE_NOTATTACHED = 0,
 
-	/* the chapter 9 device states */
+	/* chapter 9 and authentication (wireless) device states */
 	USB_STATE_ATTACHED,
-	USB_STATE_POWERED,
+	USB_STATE_POWERED,			/* wired */
+	USB_STATE_UNAUTHENTICATED,		/* auth */
+	USB_STATE_RECONNECTING,			/* auth */
 	USB_STATE_DEFAULT,			/* limited function */
 	USB_STATE_ADDRESS,
 	USB_STATE_CONFIGURED,			/* most functions */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index ce40675..6f6c697 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -315,6 +315,7 @@
 #define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S','9','1','0') /* SN9C10x compression */
 #define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P','W','C','1') /* pwc older webcam */
 #define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P','W','C','2') /* pwc newer webcam */
+#define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E','6','2','5') /* ET61X251 compression */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c
index b963c55..bdee050 100644
--- a/sound/oss/au1550_ac97.c
+++ b/sound/oss/au1550_ac97.c
@@ -462,7 +462,7 @@
 	/* Wait for Transmit Busy to show disabled.
 	*/
 	do {
-		stat = readl((void *)PSC_AC97STAT);
+		stat = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((stat & PSC_AC97STAT_TB) != 0);
 
@@ -491,7 +491,7 @@
 	/* Wait for Receive Busy to show disabled.
 	*/
 	do {
-		stat = readl((void *)PSC_AC97STAT);
+		stat = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((stat & PSC_AC97STAT_RB) != 0);
 
@@ -541,7 +541,7 @@
 	/* Wait for Device ready.
 	*/
 	do {
-		stat = readl((void *)PSC_AC97STAT);
+		stat = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((stat & PSC_AC97STAT_DR) == 0);
 }
@@ -573,7 +573,7 @@
 	/* Wait for Device ready.
 	*/
 	do {
-		stat = readl((void *)PSC_AC97STAT);
+		stat = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((stat & PSC_AC97STAT_DR) == 0);
 }
@@ -1995,7 +1995,7 @@
 	/* Wait for PSC ready.
 	*/
 	do {
-		val = readl((void *)PSC_AC97STAT);
+		val = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((val & PSC_AC97STAT_SR) == 0);
 
@@ -2018,7 +2018,7 @@
 	/* Wait for Device ready.
 	*/
 	do {
-		val = readl((void *)PSC_AC97STAT);
+		val = au_readl(PSC_AC97STAT);
 		au_sync();
 	} while ((val & PSC_AC97STAT_DR) == 0);