arm/dt: msm8974: Remove obsolete properties from sensor devices
Remove obsolete properties from sensor devices that are not used
in sensor driver. Also remove documentation.
Change-Id: If118d55c1d94c24009a6ada5ab68d096297c5345
Signed-off-by: Sreesudhan Ramakrish Ramkumar <srramku@codeaurora.org>
diff --git a/Documentation/devicetree/bindings/media/video/msm-cci.txt b/Documentation/devicetree/bindings/media/video/msm-cci.txt
index 1a034dd..a432fb5 100644
--- a/Documentation/devicetree/bindings/media/video/msm-cci.txt
+++ b/Documentation/devicetree/bindings/media/video/msm-cci.txt
@@ -82,9 +82,6 @@
- qcom,is-vpe : should be enabled if VPE module is required for post processing
of this sensor
- 1 if required, 0 otherwise
-- qcom,led-flash-sd-index : should contain phandle to flash source node if flash
- is supported for this sensor
- - led_flash0, led_flash1
- qcom,mount-angle : should contain the physical mount angle of the sensor on
the target
- 0, 90, 180, 360
@@ -188,7 +185,6 @@
compatible = "qcom,s5k3l1yx";
reg = <0x6e 0x0>;
qcom,slave-id = <0x6e 0x0 0x3121>;
- qcom,led-flash-sd-index = <0>;
qcom,csiphy-sd-index = <2>;
qcom,csid-sd-index = <0>;
qcom,actuator-src = <&actuator0>;
diff --git a/arch/arm/boot/dts/msm8974-camera-sensor-cdp-mtp.dtsi b/arch/arm/boot/dts/msm8974-camera-sensor-cdp-mtp.dtsi
index 31e1188..fb2917c 100644
--- a/arch/arm/boot/dts/msm8974-camera-sensor-cdp-mtp.dtsi
+++ b/arch/arm/boot/dts/msm8974-camera-sensor-cdp-mtp.dtsi
@@ -26,7 +26,6 @@
qcom,slave-id = <0x6e 0x0 0x3121>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
- qcom,flash-src-index = <&led_flash0>;
qcom,actuator-src = <&actuator0>;
qcom,mount-angle = <90>;
qcom,sensor-name = "s5k3l1yx";
@@ -66,7 +65,6 @@
compatible = "qcom,ov2720";
reg = <0x6c 0x0>;
qcom,slave-id = <0x6c 0x300A 0x2720>;
- qcom,led-flash-sd-index = <0>;
qcom,csiphy-sd-index = <2>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <90>;
diff --git a/arch/arm/boot/dts/msm8974-camera-sensor-fluid.dtsi b/arch/arm/boot/dts/msm8974-camera-sensor-fluid.dtsi
index 03e016d..501926d 100644
--- a/arch/arm/boot/dts/msm8974-camera-sensor-fluid.dtsi
+++ b/arch/arm/boot/dts/msm8974-camera-sensor-fluid.dtsi
@@ -26,7 +26,6 @@
qcom,slave-id = <0x6e 0x0 0x3121>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
- qcom,flash-src-index = <&led_flash0>;
qcom,actuator-src = <&actuator0>;
qcom,mount-angle = <270>;
qcom,sensor-name = "s5k3l1yx";
@@ -66,7 +65,6 @@
compatible = "qcom,ov2720";
reg = <0x6c>;
qcom,slave-id = <0x6c 0x300A 0x2720>;
- qcom,led-flash-sd-index = <0>;
qcom,csiphy-sd-index = <2>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <90>;
diff --git a/arch/arm/boot/dts/msm8974-camera-sensor-liquid.dtsi b/arch/arm/boot/dts/msm8974-camera-sensor-liquid.dtsi
index 44bb13f..b313795 100644
--- a/arch/arm/boot/dts/msm8974-camera-sensor-liquid.dtsi
+++ b/arch/arm/boot/dts/msm8974-camera-sensor-liquid.dtsi
@@ -27,7 +27,6 @@
qcom,slave-id = <0x6e 0x0 0x3121>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
- qcom,flash-src-index = <&led_flash0>;
qcom,mount-angle = <0>;
qcom,sensor-name = "s5k3l1yx";
cam_vdig-supply = <&pm8941_l3>;
@@ -63,7 +62,6 @@
compatible = "qcom,ov2720";
reg = <0x6c 0x0>;
qcom,slave-id = <0x6c 0x300A 0x2720>;
- qcom,led-flash-sd-index = <0>;
qcom,csiphy-sd-index = <2>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <180>;