sata_sil: ignore and clear spurious IRQs while executing commands by polling
sata_sil used to trigger HSM error if IRQ occurs during polling
command. This didn't matter because polling wasn't used in sata_sil.
However, as of 2.6.20, all IDENTIFYs are performed by polling and
device detection sometimes fails due to spurious IRQ. This patch
makes sata_sil ignore and clear spurious IRQ while executing commands
by polling.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 1487255..aaff357 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -386,9 +386,15 @@
goto freeze;
}
- if (unlikely(!qc || qc->tf.ctl & ATA_NIEN))
+ if (unlikely(!qc))
goto freeze;
+ if (unlikely(qc->tf.flags & ATA_TFLAG_POLLING)) {
+ /* this sometimes happens, just clear IRQ */
+ ata_chk_status(ap);
+ return;
+ }
+
/* Check whether we are expecting interrupt in this state */
switch (ap->hsm_task_state) {
case HSM_ST_FIRST: