| /* Written 2000 by Andi Kleen */ |
| #ifndef __ARCH_DESC_H |
| #define __ARCH_DESC_H |
| |
| #include <linux/threads.h> |
| #include <asm/ldt.h> |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <linux/string.h> |
| #include <linux/smp.h> |
| #include <asm/desc_defs.h> |
| |
| #include <asm/segment.h> |
| #include <asm/mmu.h> |
| |
| extern struct desc_struct cpu_gdt_table[GDT_ENTRIES]; |
| |
| #define load_TR_desc() asm volatile("ltr %w0"::"r" (GDT_ENTRY_TSS*8)) |
| #define load_LDT_desc() asm volatile("lldt %w0"::"r" (GDT_ENTRY_LDT*8)) |
| #define clear_LDT() asm volatile("lldt %w0"::"r" (0)) |
| |
| /* |
| * This is the ldt that every process will get unless we need |
| * something other than this. |
| */ |
| extern struct desc_struct default_ldt[]; |
| extern struct gate_struct idt_table[]; |
| extern struct desc_ptr cpu_gdt_descr[]; |
| |
| /* the cpu gdt accessor */ |
| #define cpu_gdt(_cpu) ((struct desc_struct *)cpu_gdt_descr[_cpu].address) |
| |
| static inline void _set_gate(void *adr, unsigned type, unsigned long func, unsigned dpl, unsigned ist) |
| { |
| struct gate_struct s; |
| s.offset_low = PTR_LOW(func); |
| s.segment = __KERNEL_CS; |
| s.ist = ist; |
| s.p = 1; |
| s.dpl = dpl; |
| s.zero0 = 0; |
| s.zero1 = 0; |
| s.type = type; |
| s.offset_middle = PTR_MIDDLE(func); |
| s.offset_high = PTR_HIGH(func); |
| /* does not need to be atomic because it is only done once at setup time */ |
| memcpy(adr, &s, 16); |
| } |
| |
| static inline void set_intr_gate(int nr, void *func) |
| { |
| BUG_ON((unsigned)nr > 0xFF); |
| _set_gate(&idt_table[nr], GATE_INTERRUPT, (unsigned long) func, 0, 0); |
| } |
| |
| static inline void set_intr_gate_ist(int nr, void *func, unsigned ist) |
| { |
| BUG_ON((unsigned)nr > 0xFF); |
| _set_gate(&idt_table[nr], GATE_INTERRUPT, (unsigned long) func, 0, ist); |
| } |
| |
| static inline void set_system_gate(int nr, void *func) |
| { |
| BUG_ON((unsigned)nr > 0xFF); |
| _set_gate(&idt_table[nr], GATE_INTERRUPT, (unsigned long) func, 3, 0); |
| } |
| |
| static inline void set_system_gate_ist(int nr, void *func, unsigned ist) |
| { |
| _set_gate(&idt_table[nr], GATE_INTERRUPT, (unsigned long) func, 3, ist); |
| } |
| |
| static inline void set_tssldt_descriptor(void *ptr, unsigned long tss, unsigned type, |
| unsigned size) |
| { |
| struct ldttss_desc d; |
| memset(&d,0,sizeof(d)); |
| d.limit0 = size & 0xFFFF; |
| d.base0 = PTR_LOW(tss); |
| d.base1 = PTR_MIDDLE(tss) & 0xFF; |
| d.type = type; |
| d.p = 1; |
| d.limit1 = (size >> 16) & 0xF; |
| d.base2 = (PTR_MIDDLE(tss) >> 8) & 0xFF; |
| d.base3 = PTR_HIGH(tss); |
| memcpy(ptr, &d, 16); |
| } |
| |
| static inline void set_tss_desc(unsigned cpu, void *addr) |
| { |
| /* |
| * sizeof(unsigned long) coming from an extra "long" at the end |
| * of the iobitmap. See tss_struct definition in processor.h |
| * |
| * -1? seg base+limit should be pointing to the address of the |
| * last valid byte |
| */ |
| set_tssldt_descriptor(&cpu_gdt(cpu)[GDT_ENTRY_TSS], |
| (unsigned long)addr, DESC_TSS, |
| IO_BITMAP_OFFSET + IO_BITMAP_BYTES + sizeof(unsigned long) - 1); |
| } |
| |
| static inline void set_ldt_desc(unsigned cpu, void *addr, int size) |
| { |
| set_tssldt_descriptor(&cpu_gdt(cpu)[GDT_ENTRY_LDT], (unsigned long)addr, |
| DESC_LDT, size * 8 - 1); |
| } |
| |
| static inline void set_seg_base(unsigned cpu, int entry, void *base) |
| { |
| struct desc_struct *d = &cpu_gdt(cpu)[entry]; |
| u32 addr = (u32)(u64)base; |
| BUG_ON((u64)base >> 32); |
| d->base0 = addr & 0xffff; |
| d->base1 = (addr >> 16) & 0xff; |
| d->base2 = (addr >> 24) & 0xff; |
| } |
| |
| #define LDT_entry_a(info) \ |
| ((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff)) |
| /* Don't allow setting of the lm bit. It is useless anyways because |
| 64bit system calls require __USER_CS. */ |
| #define LDT_entry_b(info) \ |
| (((info)->base_addr & 0xff000000) | \ |
| (((info)->base_addr & 0x00ff0000) >> 16) | \ |
| ((info)->limit & 0xf0000) | \ |
| (((info)->read_exec_only ^ 1) << 9) | \ |
| ((info)->contents << 10) | \ |
| (((info)->seg_not_present ^ 1) << 15) | \ |
| ((info)->seg_32bit << 22) | \ |
| ((info)->limit_in_pages << 23) | \ |
| ((info)->useable << 20) | \ |
| /* ((info)->lm << 21) | */ \ |
| 0x7000) |
| |
| #define LDT_empty(info) (\ |
| (info)->base_addr == 0 && \ |
| (info)->limit == 0 && \ |
| (info)->contents == 0 && \ |
| (info)->read_exec_only == 1 && \ |
| (info)->seg_32bit == 0 && \ |
| (info)->limit_in_pages == 0 && \ |
| (info)->seg_not_present == 1 && \ |
| (info)->useable == 0 && \ |
| (info)->lm == 0) |
| |
| #if TLS_SIZE != 24 |
| # error update this code. |
| #endif |
| |
| static inline void load_TLS(struct thread_struct *t, unsigned int cpu) |
| { |
| u64 *gdt = (u64 *)(cpu_gdt(cpu) + GDT_ENTRY_TLS_MIN); |
| gdt[0] = t->tls_array[0]; |
| gdt[1] = t->tls_array[1]; |
| gdt[2] = t->tls_array[2]; |
| } |
| |
| /* |
| * load one particular LDT into the current CPU |
| */ |
| static inline void load_LDT_nolock (mm_context_t *pc, int cpu) |
| { |
| int count = pc->size; |
| |
| if (likely(!count)) { |
| clear_LDT(); |
| return; |
| } |
| |
| set_ldt_desc(cpu, pc->ldt, count); |
| load_LDT_desc(); |
| } |
| |
| static inline void load_LDT(mm_context_t *pc) |
| { |
| int cpu = get_cpu(); |
| load_LDT_nolock(pc, cpu); |
| put_cpu(); |
| } |
| |
| extern struct desc_ptr idt_descr; |
| |
| #endif /* !__ASSEMBLY__ */ |
| |
| #endif |