| /* |
| * Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| |
| #include <linux/clk.h> |
| #include <mach/clk-provider.h> |
| #include <mach/clk.h> |
| #include <mach/clock-generic.h> |
| #include <mach/msm-krait-l2-accessors.h> |
| #include "clock-krait.h" |
| #include "avs.h" |
| |
| static DEFINE_SPINLOCK(kpss_clock_reg_lock); |
| |
| #define LPL_SHIFT 8 |
| static void __kpss_mux_set_sel(struct mux_clk *mux, int sel) |
| { |
| unsigned long flags; |
| u32 regval; |
| |
| spin_lock_irqsave(&kpss_clock_reg_lock, flags); |
| regval = get_l2_indirect_reg(mux->offset); |
| regval &= ~(mux->mask << mux->shift); |
| regval |= (sel & mux->mask) << mux->shift; |
| if (mux->priv) { |
| regval &= ~(mux->mask << (mux->shift + LPL_SHIFT)); |
| regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT); |
| } |
| set_l2_indirect_reg(mux->offset, regval); |
| spin_unlock_irqrestore(&kpss_clock_reg_lock, flags); |
| |
| /* Wait for switch to complete. */ |
| mb(); |
| udelay(1); |
| } |
| static int kpss_mux_set_sel(struct mux_clk *mux, int sel) |
| { |
| mux->en_mask = sel; |
| if (mux->c.count) |
| __kpss_mux_set_sel(mux, sel); |
| return 0; |
| } |
| |
| static int kpss_mux_get_sel(struct mux_clk *mux) |
| { |
| u32 sel; |
| |
| sel = get_l2_indirect_reg(mux->offset); |
| sel >>= mux->shift; |
| sel &= mux->mask; |
| mux->en_mask = sel; |
| |
| return sel; |
| } |
| |
| static int kpss_mux_enable(struct mux_clk *mux) |
| { |
| __kpss_mux_set_sel(mux, mux->en_mask); |
| return 0; |
| } |
| |
| static void kpss_mux_disable(struct mux_clk *mux) |
| { |
| __kpss_mux_set_sel(mux, mux->safe_sel); |
| } |
| |
| struct clk_mux_ops clk_mux_ops_kpss = { |
| .enable = kpss_mux_enable, |
| .disable = kpss_mux_disable, |
| .set_mux_sel = kpss_mux_set_sel, |
| .get_mux_sel = kpss_mux_get_sel, |
| }; |
| |
| /* |
| * The divider can divide by 2, 4, 6 and 8. But we only really need div-2. So |
| * force it to div-2 during handoff and treat it like a fixed div-2 clock. |
| */ |
| static int kpss_div2_get_div(struct div_clk *div) |
| { |
| unsigned long flags; |
| u32 regval; |
| int val; |
| |
| spin_lock_irqsave(&kpss_clock_reg_lock, flags); |
| regval = get_l2_indirect_reg(div->offset); |
| val = (regval >> div->shift) & div->mask; |
| regval &= ~(div->mask << div->shift); |
| if (div->priv) |
| regval &= ~(div->mask << (div->shift + LPL_SHIFT)); |
| set_l2_indirect_reg(div->offset, regval); |
| spin_unlock_irqrestore(&kpss_clock_reg_lock, flags); |
| |
| val = (val + 1) * 2; |
| WARN(val != 2, "Divider %s was configured to div-%d instead of 2!\n", |
| div->c.dbg_name, val); |
| |
| return 2; |
| } |
| |
| struct clk_div_ops clk_div_ops_kpss_div2 = { |
| .get_div = kpss_div2_get_div, |
| }; |
| |
| #define LOCK_BIT BIT(16) |
| |
| /* Initialize a HFPLL at a given rate and enable it. */ |
| static void __hfpll_clk_init_once(struct clk *c) |
| { |
| struct hfpll_clk *h = to_hfpll_clk(c); |
| struct hfpll_data const *hd = h->d; |
| |
| if (likely(h->init_done)) |
| return; |
| |
| /* Configure PLL parameters for integer mode. */ |
| if (hd->config_val) |
| writel_relaxed(hd->config_val, h->base + hd->config_offset); |
| writel_relaxed(0, h->base + hd->m_offset); |
| writel_relaxed(1, h->base + hd->n_offset); |
| |
| if (hd->user_offset) { |
| u32 regval = hd->user_val; |
| unsigned long rate; |
| |
| rate = readl_relaxed(h->base + hd->l_offset) * h->src_rate; |
| |
| /* Pick the right VCO. */ |
| if (hd->user_vco_mask && rate > hd->low_vco_max_rate) |
| regval |= hd->user_vco_mask; |
| writel_relaxed(regval, h->base + hd->user_offset); |
| } |
| |
| if (hd->droop_offset) |
| writel_relaxed(hd->droop_val, h->base + hd->droop_offset); |
| |
| h->init_done = true; |
| } |
| |
| /* Enable an already-configured HFPLL. */ |
| static int hfpll_clk_enable(struct clk *c) |
| { |
| struct hfpll_clk *h = to_hfpll_clk(c); |
| struct hfpll_data const *hd = h->d; |
| |
| if (!h->base) |
| return -ENODEV; |
| |
| __hfpll_clk_init_once(c); |
| |
| /* Disable PLL bypass mode. */ |
| writel_relaxed(0x2, h->base + hd->mode_offset); |
| |
| /* |
| * H/W requires a 5us delay between disabling the bypass and |
| * de-asserting the reset. Delay 10us just to be safe. |
| */ |
| mb(); |
| udelay(10); |
| |
| /* De-assert active-low PLL reset. */ |
| writel_relaxed(0x6, h->base + hd->mode_offset); |
| |
| /* Wait for PLL to lock. */ |
| if (hd->status_offset) { |
| while (!(readl_relaxed(h->base + hd->status_offset) & LOCK_BIT)) |
| ; |
| } else { |
| mb(); |
| udelay(60); |
| } |
| |
| /* Enable PLL output. */ |
| writel_relaxed(0x7, h->base + hd->mode_offset); |
| |
| /* Make sure the enable is done before returning. */ |
| mb(); |
| |
| return 0; |
| } |
| |
| static void hfpll_clk_disable(struct clk *c) |
| { |
| struct hfpll_clk *h = to_hfpll_clk(c); |
| struct hfpll_data const *hd = h->d; |
| |
| /* |
| * Disable the PLL output, disable test mode, enable the bypass mode, |
| * and assert the reset. |
| */ |
| writel_relaxed(0, h->base + hd->mode_offset); |
| } |
| |
| static long hfpll_clk_round_rate(struct clk *c, unsigned long rate) |
| { |
| struct hfpll_clk *h = to_hfpll_clk(c); |
| struct hfpll_data const *hd = h->d; |
| unsigned long rrate; |
| |
| if (!h->src_rate) |
| return 0; |
| |
| rate = max(rate, hd->min_rate); |
| rate = min(rate, hd->max_rate); |
| |
| rrate = DIV_ROUND_UP(rate, h->src_rate) * h->src_rate; |
| if (rrate > hd->max_rate) |
| rrate -= h->src_rate; |
| |
| return rrate; |
| } |
| |
| /* |
| * For optimization reasons, assumes no downstream clocks are actively using |
| * it. |
| */ |
| static int hfpll_clk_set_rate(struct clk *c, unsigned long rate) |
| { |
| struct hfpll_clk *h = to_hfpll_clk(c); |
| struct hfpll_data const *hd = h->d; |
| unsigned long flags; |
| u32 l_val; |
| |
| if (!h->base) |
| return -ENODEV; |
| |
| if (rate != hfpll_clk_round_rate(c, rate)) |
| return -EINVAL; |
| |
| l_val = rate / h->src_rate; |
| |
| spin_lock_irqsave(&c->lock, flags); |
| |
| if (c->count) |
| hfpll_clk_disable(c); |
| |
| /* Pick the right VCO. */ |
| if (hd->user_offset && hd->user_vco_mask) { |
| u32 regval; |
| regval = readl_relaxed(h->base + hd->user_offset); |
| if (rate <= hd->low_vco_max_rate) |
| regval &= ~hd->user_vco_mask; |
| else |
| regval |= hd->user_vco_mask; |
| writel_relaxed(regval, h->base + hd->user_offset); |
| } |
| |
| writel_relaxed(l_val, h->base + hd->l_offset); |
| |
| if (c->count) |
| hfpll_clk_enable(c); |
| |
| spin_unlock_irqrestore(&c->lock, flags); |
| |
| return 0; |
| } |
| |
| static enum handoff hfpll_clk_handoff(struct clk *c) |
| { |
| struct hfpll_clk *h = to_hfpll_clk(c); |
| struct hfpll_data const *hd = h->d; |
| u32 l_val, mode; |
| |
| if (!hd) |
| return HANDOFF_DISABLED_CLK; |
| |
| if (!h->base) |
| return HANDOFF_DISABLED_CLK; |
| |
| /* Assume parent rate doesn't change and cache it. */ |
| h->src_rate = clk_get_rate(c->parent); |
| l_val = readl_relaxed(h->base + hd->l_offset); |
| c->rate = l_val * h->src_rate; |
| |
| mode = readl_relaxed(h->base + hd->mode_offset) & 0x7; |
| if (mode != 0x7) { |
| __hfpll_clk_init_once(c); |
| return HANDOFF_DISABLED_CLK; |
| } |
| |
| if (hd->status_offset && |
| !(readl_relaxed(h->base + hd->status_offset) & LOCK_BIT)) { |
| WARN(1, "HFPLL %s is ON, but not locked!\n", c->dbg_name); |
| hfpll_clk_disable(c); |
| __hfpll_clk_init_once(c); |
| return HANDOFF_DISABLED_CLK; |
| } |
| |
| WARN(c->rate < hd->min_rate || c->rate > hd->max_rate, |
| "HFPLL %s rate %lu outside spec!\n", c->dbg_name, c->rate); |
| |
| return HANDOFF_ENABLED_CLK; |
| } |
| |
| struct clk_ops clk_ops_hfpll = { |
| .enable = hfpll_clk_enable, |
| .disable = hfpll_clk_disable, |
| .round_rate = hfpll_clk_round_rate, |
| .set_rate = hfpll_clk_set_rate, |
| .handoff = hfpll_clk_handoff, |
| }; |
| |
| struct cpu_hwcg_action { |
| bool read; |
| bool enable; |
| }; |
| |
| static void cpu_hwcg_rw(void *info) |
| { |
| struct cpu_hwcg_action *action = info; |
| |
| u32 val; |
| asm volatile ("mrc p15, 7, %[cpmr0], c15, c0, 5\n\t" |
| : [cpmr0]"=r" (val)); |
| |
| if (action->read) { |
| action->enable = !(val & BIT(0)); |
| return; |
| } |
| |
| if (action->enable) |
| val &= ~BIT(0); |
| else |
| val |= BIT(0); |
| |
| asm volatile ("mcr p15, 7, %[cpmr0], c15, c0, 5\n\t" |
| : : [cpmr0]"r" (val)); |
| } |
| |
| static void kpss_cpu_enable_hwcg(struct clk *c) |
| { |
| struct kpss_core_clk *cpu = to_kpss_core_clk(c); |
| struct cpu_hwcg_action action = { .enable = true }; |
| |
| smp_call_function_single(cpu->id, cpu_hwcg_rw, &action, 1); |
| } |
| |
| static void kpss_cpu_disable_hwcg(struct clk *c) |
| { |
| struct kpss_core_clk *cpu = to_kpss_core_clk(c); |
| struct cpu_hwcg_action action = { .enable = false }; |
| |
| smp_call_function_single(cpu->id, cpu_hwcg_rw, &action, 1); |
| } |
| |
| static int kpss_cpu_in_hwcg_mode(struct clk *c) |
| { |
| struct kpss_core_clk *cpu = to_kpss_core_clk(c); |
| struct cpu_hwcg_action action = { .read = true }; |
| |
| smp_call_function_single(cpu->id, cpu_hwcg_rw, &action, 1); |
| return action.enable; |
| } |
| |
| static enum handoff kpss_cpu_handoff(struct clk *c) |
| { |
| struct kpss_core_clk *cpu = to_kpss_core_clk(c); |
| |
| c->rate = clk_get_rate(c->parent); |
| |
| /* |
| * Don't unnecessarily turn on the parents for an offline CPU and |
| * then have them turned off at late init. |
| */ |
| return (cpu_online(cpu->id) ? |
| HANDOFF_ENABLED_CLK : HANDOFF_DISABLED_CLK); |
| } |
| |
| u32 find_dscr(struct avs_data *t, unsigned long rate) |
| { |
| int i; |
| |
| if (!t) |
| return 0; |
| |
| for (i = 0; i < t->num; i++) { |
| if (t->rate[i] == rate) |
| return t->dscr[i]; |
| } |
| |
| return 0; |
| } |
| |
| static int kpss_cpu_pre_set_rate(struct clk *c, unsigned long new_rate) |
| { |
| struct kpss_core_clk *cpu = to_kpss_core_clk(c); |
| u32 dscr = find_dscr(cpu->avs_tbl, c->rate); |
| |
| if (dscr) |
| AVS_DISABLE(cpu->id); |
| return 0; |
| } |
| |
| static long kpss_core_round_rate(struct clk *c, unsigned long rate) |
| { |
| if (c->fmax && c->num_fmax) |
| rate = min(rate, c->fmax[c->num_fmax-1]); |
| |
| return clk_round_rate(c->parent, rate); |
| } |
| |
| static int kpss_core_set_rate(struct clk *c, unsigned long rate) |
| { |
| return clk_set_rate(c->parent, rate); |
| } |
| |
| static void kpss_cpu_post_set_rate(struct clk *c, unsigned long old_rate) |
| { |
| struct kpss_core_clk *cpu = to_kpss_core_clk(c); |
| u32 dscr = find_dscr(cpu->avs_tbl, c->rate); |
| |
| /* |
| * FIXME: If AVS enable/disable needs to be done in the |
| * enable/disable op to correctly handle power collapse, then might |
| * need to grab the spinlock here. |
| */ |
| if (dscr) |
| AVS_ENABLE(cpu->id, dscr); |
| } |
| |
| static unsigned long kpss_core_get_rate(struct clk *c) |
| { |
| return clk_get_rate(c->parent); |
| } |
| |
| static long kpss_core_list_rate(struct clk *c, unsigned n) |
| { |
| if (!c->fmax || c->num_fmax <= n) |
| return -ENXIO; |
| |
| return c->fmax[n]; |
| } |
| |
| struct clk_ops clk_ops_kpss_cpu = { |
| .enable_hwcg = kpss_cpu_enable_hwcg, |
| .disable_hwcg = kpss_cpu_disable_hwcg, |
| .in_hwcg_mode = kpss_cpu_in_hwcg_mode, |
| .pre_set_rate = kpss_cpu_pre_set_rate, |
| .round_rate = kpss_core_round_rate, |
| .set_rate = kpss_core_set_rate, |
| .post_set_rate = kpss_cpu_post_set_rate, |
| .get_rate = kpss_core_get_rate, |
| .list_rate = kpss_core_list_rate, |
| .handoff = kpss_cpu_handoff, |
| }; |
| |
| #define SLPDLY_SHIFT 10 |
| #define SLPDLY_MASK 0x3 |
| static void kpss_l2_enable_hwcg(struct clk *c) |
| { |
| struct kpss_core_clk *l2 = to_kpss_core_clk(c); |
| u32 regval; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&kpss_clock_reg_lock, flags); |
| regval = get_l2_indirect_reg(l2->cp15_iaddr); |
| regval &= ~(SLPDLY_MASK << SLPDLY_SHIFT); |
| regval |= l2->l2_slp_delay; |
| set_l2_indirect_reg(l2->cp15_iaddr, regval); |
| spin_unlock_irqrestore(&kpss_clock_reg_lock, flags); |
| } |
| |
| static void kpss_l2_disable_hwcg(struct clk *c) |
| { |
| struct kpss_core_clk *l2 = to_kpss_core_clk(c); |
| u32 regval; |
| unsigned long flags; |
| |
| /* |
| * NOTE: Should not be called when HW clock gating is already |
| * disabled. |
| */ |
| spin_lock_irqsave(&kpss_clock_reg_lock, flags); |
| regval = get_l2_indirect_reg(l2->cp15_iaddr); |
| l2->l2_slp_delay = regval & (SLPDLY_MASK << SLPDLY_SHIFT); |
| regval |= (SLPDLY_MASK << SLPDLY_SHIFT); |
| set_l2_indirect_reg(l2->cp15_iaddr, regval); |
| spin_unlock_irqrestore(&kpss_clock_reg_lock, flags); |
| } |
| |
| static int kpss_l2_in_hwcg_mode(struct clk *c) |
| { |
| struct kpss_core_clk *l2 = to_kpss_core_clk(c); |
| u32 regval; |
| |
| regval = get_l2_indirect_reg(l2->cp15_iaddr); |
| regval >>= SLPDLY_SHIFT; |
| regval &= SLPDLY_MASK; |
| return (regval != SLPDLY_MASK); |
| } |
| |
| static enum handoff kpss_l2_handoff(struct clk *c) |
| { |
| c->rate = clk_get_rate(c->parent); |
| return HANDOFF_ENABLED_CLK; |
| } |
| |
| struct clk_ops clk_ops_kpss_l2 = { |
| .enable_hwcg = kpss_l2_enable_hwcg, |
| .disable_hwcg = kpss_l2_disable_hwcg, |
| .in_hwcg_mode = kpss_l2_in_hwcg_mode, |
| .round_rate = kpss_core_round_rate, |
| .set_rate = kpss_core_set_rate, |
| .get_rate = kpss_core_get_rate, |
| .list_rate = kpss_core_list_rate, |
| .handoff = kpss_l2_handoff, |
| }; |