| /* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/uaccess.h> |
| #include <linux/diagchar.h> |
| #include <linux/sched.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/workqueue.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_wakeup.h> |
| #include <linux/spinlock.h> |
| #include <asm/current.h> |
| #ifdef CONFIG_DIAG_OVER_USB |
| #include <mach/usbdiag.h> |
| #endif |
| #include "diagchar_hdlc.h" |
| #include "diagmem.h" |
| #include "diagchar.h" |
| #include "diagfwd.h" |
| #include "diagfwd_cntl.h" |
| #include "diag_dci.h" |
| |
| unsigned int dci_max_reg = 100; |
| unsigned int dci_max_clients = 10; |
| unsigned char dci_cumulative_log_mask[DCI_LOG_MASK_SIZE]; |
| unsigned char dci_cumulative_event_mask[DCI_EVENT_MASK_SIZE]; |
| struct mutex dci_log_mask_mutex; |
| struct mutex dci_event_mask_mutex; |
| struct mutex dci_health_mutex; |
| |
| spinlock_t ws_lock; |
| unsigned long ws_lock_flags; |
| |
| /* Number of milliseconds anticipated to process the DCI data */ |
| #define DCI_WAKEUP_TIMEOUT 1 |
| |
| #define DCI_CHK_CAPACITY(entry, new_data_len) \ |
| ((entry->data_len + new_data_len > entry->total_capacity) ? 1 : 0) \ |
| |
| #ifdef CONFIG_DEBUG_FS |
| struct diag_dci_data_info *dci_data_smd; |
| struct mutex dci_stat_mutex; |
| |
| void diag_dci_smd_record_info(int read_bytes, uint8_t ch_type) |
| { |
| static int curr_dci_data_smd; |
| static unsigned long iteration; |
| struct diag_dci_data_info *temp_data = dci_data_smd; |
| if (!temp_data) |
| return; |
| mutex_lock(&dci_stat_mutex); |
| if (curr_dci_data_smd == DIAG_DCI_DEBUG_CNT) |
| curr_dci_data_smd = 0; |
| temp_data += curr_dci_data_smd; |
| temp_data->iteration = iteration + 1; |
| temp_data->data_size = read_bytes; |
| temp_data->ch_type = ch_type; |
| diag_get_timestamp(temp_data->time_stamp); |
| curr_dci_data_smd++; |
| iteration++; |
| mutex_unlock(&dci_stat_mutex); |
| } |
| #else |
| void diag_dci_smd_record_info(int read_bytes, uint8_t ch_type) { } |
| #endif |
| |
| /* Process the data read from the smd dci channel */ |
| int diag_process_smd_dci_read_data(struct diag_smd_info *smd_info, void *buf, |
| int recd_bytes) |
| { |
| int read_bytes, dci_pkt_len, i; |
| uint8_t recv_pkt_cmd_code; |
| |
| diag_dci_smd_record_info(recd_bytes, (uint8_t)smd_info->type); |
| /* Each SMD read can have multiple DCI packets */ |
| read_bytes = 0; |
| while (read_bytes < recd_bytes) { |
| /* read actual length of dci pkt */ |
| dci_pkt_len = *(uint16_t *)(buf+2); |
| /* process one dci packet */ |
| pr_debug("diag: bytes read = %d, single dci pkt len = %d\n", |
| read_bytes, dci_pkt_len); |
| /* print_hex_dump(KERN_DEBUG, "Single DCI packet :", |
| DUMP_PREFIX_ADDRESS, 16, 1, buf, 5 + dci_pkt_len, 1); */ |
| recv_pkt_cmd_code = *(uint8_t *)(buf+4); |
| if (recv_pkt_cmd_code == LOG_CMD_CODE) |
| extract_dci_log(buf+4); |
| else if (recv_pkt_cmd_code == EVENT_CMD_CODE) |
| extract_dci_events(buf+4); |
| else |
| extract_dci_pkt_rsp(smd_info, buf); /* pkt response */ |
| read_bytes += 5 + dci_pkt_len; |
| buf += 5 + dci_pkt_len; /* advance to next DCI pkt */ |
| } |
| /* Release wakeup source when there are no more clients to |
| process DCI data */ |
| if (driver->num_dci_client == 0) |
| diag_dci_try_deactivate_wakeup_source(smd_info->ch); |
| |
| /* wake up all sleeping DCI clients which have some data */ |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| if (driver->dci_client_tbl[i].client && |
| driver->dci_client_tbl[i].data_len) { |
| smd_info->in_busy_1 = 1; |
| diag_update_sleeping_process( |
| driver->dci_client_tbl[i].client->tgid, |
| DCI_DATA_TYPE); |
| } |
| } |
| |
| return 0; |
| } |
| |
| void extract_dci_pkt_rsp(struct diag_smd_info *smd_info, unsigned char *buf) |
| { |
| int i = 0, index = -1, cmd_code_len = 1; |
| int curr_client_pid = 0, write_len; |
| struct diag_dci_client_tbl *entry; |
| void *temp_buf = NULL; |
| uint8_t recv_pkt_cmd_code; |
| |
| recv_pkt_cmd_code = *(uint8_t *)(buf+4); |
| if (recv_pkt_cmd_code != DCI_PKT_RSP_CODE) |
| cmd_code_len = 4; /* delayed response */ |
| write_len = (int)(*(uint16_t *)(buf+2)) - cmd_code_len; |
| |
| pr_debug("diag: len = %d\n", write_len); |
| /* look up DCI client with tag */ |
| for (i = 0; i < dci_max_reg; i++) { |
| if (driver->req_tracking_tbl[i].tag == |
| *(int *)(buf+(4+cmd_code_len))) { |
| *(int *)(buf+4+cmd_code_len) = |
| driver->req_tracking_tbl[i].uid; |
| curr_client_pid = |
| driver->req_tracking_tbl[i].pid; |
| index = i; |
| break; |
| } |
| } |
| if (index == -1) { |
| pr_alert("diag: No matching PID for DCI data\n"); |
| return; |
| } |
| /* Using PID of client process, find client buffer */ |
| i = diag_dci_find_client_index(curr_client_pid); |
| if (i != DCI_CLIENT_INDEX_INVALID) { |
| /* copy pkt rsp in client buf */ |
| entry = &(driver->dci_client_tbl[i]); |
| mutex_lock(&entry->data_mutex); |
| if (DCI_CHK_CAPACITY(entry, 8+write_len)) { |
| pr_alert("diag: create capacity for pkt rsp\n"); |
| entry->total_capacity += 8+write_len; |
| temp_buf = krealloc(entry->dci_data, |
| entry->total_capacity, GFP_KERNEL); |
| if (!temp_buf) { |
| pr_err("diag: DCI realloc failed\n"); |
| mutex_unlock(&entry->data_mutex); |
| return; |
| } else { |
| entry->dci_data = temp_buf; |
| } |
| } |
| *(int *)(entry->dci_data+entry->data_len) = |
| DCI_PKT_RSP_TYPE; |
| entry->data_len += 4; |
| *(int *)(entry->dci_data+entry->data_len) |
| = write_len; |
| entry->data_len += 4; |
| memcpy(entry->dci_data+entry->data_len, |
| buf+4+cmd_code_len, write_len); |
| entry->data_len += write_len; |
| mutex_unlock(&entry->data_mutex); |
| /* delete immediate response entry */ |
| if (smd_info->buf_in_1[8+cmd_code_len] != 0x80) |
| driver->req_tracking_tbl[index].pid = 0; |
| } |
| } |
| |
| void extract_dci_events(unsigned char *buf) |
| { |
| uint16_t event_id, event_id_packet, length, temp_len; |
| uint8_t *event_mask_ptr, byte_mask, payload_len, payload_len_field; |
| uint8_t timestamp[8], bit_index, timestamp_len; |
| uint8_t event_data[MAX_EVENT_SIZE]; |
| unsigned int byte_index, total_event_len, i; |
| struct diag_dci_client_tbl *entry; |
| |
| length = *(uint16_t *)(buf + 1); /* total length of event series */ |
| if (length == 0) { |
| pr_err("diag: Incoming dci event length is invalid\n"); |
| return; |
| } |
| temp_len = 0; |
| buf = buf + 3; /* start of event series */ |
| while (temp_len < (length - 1)) { |
| event_id_packet = *(uint16_t *)(buf + temp_len); |
| event_id = event_id_packet & 0x0FFF; /* extract 12 bits */ |
| if (event_id_packet & 0x8000) { |
| /* The packet has the two smallest byte of the |
| * timestamp |
| */ |
| timestamp_len = 2; |
| } else { |
| /* The packet has the full timestamp. The first event |
| * will always have full timestamp. Save it in the |
| * timestamp buffer and use it for subsequent events if |
| * necessary. |
| */ |
| timestamp_len = 8; |
| memcpy(timestamp, buf + temp_len + 2, timestamp_len); |
| } |
| /* 13th and 14th bit represent the payload length */ |
| if (((event_id_packet & 0x6000) >> 13) == 3) { |
| payload_len_field = 1; |
| payload_len = *(uint8_t *) |
| (buf + temp_len + 2 + timestamp_len); |
| if (payload_len < (MAX_EVENT_SIZE - 13)) { |
| /* copy the payload length and the payload */ |
| memcpy(event_data + 12, buf + temp_len + 2 + |
| timestamp_len, 1); |
| memcpy(event_data + 13, buf + temp_len + 2 + |
| timestamp_len + 1, payload_len); |
| } else { |
| pr_err("diag: event > %d, payload_len = %d\n", |
| (MAX_EVENT_SIZE - 13), payload_len); |
| return; |
| } |
| } else { |
| payload_len_field = 0; |
| payload_len = (event_id_packet & 0x6000) >> 13; |
| /* copy the payload */ |
| memcpy(event_data + 12, buf + temp_len + 2 + |
| timestamp_len, payload_len); |
| } |
| /* 2 bytes for the event id & timestamp len is hard coded to 8, |
| as individual events have full timestamp */ |
| *(uint16_t *)(event_data) = 10 + |
| payload_len_field + payload_len; |
| *(uint16_t *)(event_data + 2) = event_id_packet & 0x7FFF; |
| memcpy(event_data + 4, timestamp, 8); |
| /* 2 bytes for the event length field which is added to |
| the event data */ |
| total_event_len = 2 + 10 + payload_len_field + payload_len; |
| byte_index = event_id / 8; |
| bit_index = event_id % 8; |
| byte_mask = 0x1 << bit_index; |
| /* parse through event mask tbl of each client and check mask */ |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| if (driver->dci_client_tbl[i].client) { |
| entry = &(driver->dci_client_tbl[i]); |
| event_mask_ptr = entry->dci_event_mask + |
| byte_index; |
| mutex_lock(&dci_health_mutex); |
| mutex_lock(&entry->data_mutex); |
| if (*event_mask_ptr & byte_mask) { |
| /* copy to client buffer */ |
| if (DCI_CHK_CAPACITY(entry, |
| 4 + total_event_len)) { |
| pr_err("diag: DCI event drop\n"); |
| driver->dci_client_tbl[i]. |
| dropped_events++; |
| mutex_unlock( |
| &entry->data_mutex); |
| mutex_unlock( |
| &dci_health_mutex); |
| break; |
| } |
| driver->dci_client_tbl[i]. |
| received_events++; |
| *(int *)(entry->dci_data+ |
| entry->data_len) = DCI_EVENT_TYPE; |
| /* 4 bytes for DCI_EVENT_TYPE */ |
| memcpy(entry->dci_data + |
| entry->data_len + 4, event_data |
| , total_event_len); |
| entry->data_len += 4 + total_event_len; |
| } |
| mutex_unlock(&entry->data_mutex); |
| mutex_unlock(&dci_health_mutex); |
| } |
| } |
| temp_len += 2 + timestamp_len + payload_len_field + payload_len; |
| } |
| } |
| |
| void extract_dci_log(unsigned char *buf) |
| { |
| uint16_t log_code, item_num; |
| uint8_t equip_id, *log_mask_ptr, byte_mask; |
| unsigned int i, byte_index, byte_offset = 0; |
| struct diag_dci_client_tbl *entry; |
| |
| log_code = *(uint16_t *)(buf + 6); |
| equip_id = LOG_GET_EQUIP_ID(log_code); |
| item_num = LOG_GET_ITEM_NUM(log_code); |
| byte_index = item_num/8 + 2; |
| byte_mask = 0x01 << (item_num % 8); |
| |
| byte_offset = (equip_id * 514) + byte_index; |
| if (byte_offset >= DCI_LOG_MASK_SIZE) { |
| pr_err("diag: Invalid byte_offset %d in dci log\n", |
| byte_offset); |
| return; |
| } |
| |
| /* parse through log mask table of each client and check mask */ |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| if (driver->dci_client_tbl[i].client) { |
| entry = &(driver->dci_client_tbl[i]); |
| log_mask_ptr = entry->dci_log_mask; |
| if (!log_mask_ptr) |
| return; |
| log_mask_ptr = log_mask_ptr + byte_offset; |
| mutex_lock(&dci_health_mutex); |
| mutex_lock(&entry->data_mutex); |
| if (*log_mask_ptr & byte_mask) { |
| pr_debug("\t log code %x needed by client %d", |
| log_code, entry->client->tgid); |
| /* copy to client buffer */ |
| if (DCI_CHK_CAPACITY(entry, |
| 4 + *(uint16_t *)(buf + 2))) { |
| pr_err("diag: DCI log drop\n"); |
| driver->dci_client_tbl[i]. |
| dropped_logs++; |
| mutex_unlock( |
| &entry->data_mutex); |
| mutex_unlock( |
| &dci_health_mutex); |
| return; |
| } |
| driver->dci_client_tbl[i].received_logs++; |
| *(int *)(entry->dci_data+entry->data_len) = |
| DCI_LOG_TYPE; |
| memcpy(entry->dci_data + entry->data_len + 4, |
| buf + 4, *(uint16_t *)(buf + 2)); |
| entry->data_len += 4 + *(uint16_t *)(buf + 2); |
| } |
| mutex_unlock(&entry->data_mutex); |
| mutex_unlock(&dci_health_mutex); |
| } |
| } |
| } |
| |
| void diag_update_smd_dci_work_fn(struct work_struct *work) |
| { |
| struct diag_smd_info *smd_info = container_of(work, |
| struct diag_smd_info, |
| diag_notify_update_smd_work); |
| int i, j; |
| char dirty_bits[16]; |
| uint8_t *client_log_mask_ptr; |
| uint8_t *log_mask_ptr; |
| int ret; |
| int index = smd_info->peripheral; |
| |
| /* Update the peripheral(s) with the dci log and event masks */ |
| |
| /* If the cntl channel is not up, we can't update logs and events */ |
| if (!driver->smd_cntl[index].ch) |
| return; |
| |
| memset(dirty_bits, 0, 16 * sizeof(uint8_t)); |
| |
| /* |
| * From each log entry used by each client, determine |
| * which log entries in the cumulative logs that need |
| * to be updated on the peripheral. |
| */ |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| if (driver->dci_client_tbl[i].client) { |
| client_log_mask_ptr = |
| driver->dci_client_tbl[i].dci_log_mask; |
| for (j = 0; j < 16; j++) { |
| if (*(client_log_mask_ptr+1)) |
| dirty_bits[j] = 1; |
| client_log_mask_ptr += 514; |
| } |
| } |
| } |
| |
| mutex_lock(&dci_log_mask_mutex); |
| /* Update the appropriate dirty bits in the cumulative mask */ |
| log_mask_ptr = dci_cumulative_log_mask; |
| for (i = 0; i < 16; i++) { |
| if (dirty_bits[i]) |
| *(log_mask_ptr+1) = dirty_bits[i]; |
| |
| log_mask_ptr += 514; |
| } |
| mutex_unlock(&dci_log_mask_mutex); |
| |
| ret = diag_send_dci_log_mask(driver->smd_cntl[index].ch); |
| |
| ret = diag_send_dci_event_mask(driver->smd_cntl[index].ch); |
| |
| smd_info->notify_context = 0; |
| } |
| |
| void diag_dci_notify_client(int peripheral_mask, int data) |
| { |
| int i, stat; |
| struct siginfo info; |
| memset(&info, 0, sizeof(struct siginfo)); |
| info.si_code = SI_QUEUE; |
| info.si_int = (peripheral_mask | data); |
| |
| /* Notify the DCI process that the peripheral DCI Channel is up */ |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| if (!driver->dci_client_tbl[i].client) |
| continue; |
| if (driver->dci_client_tbl[i].list & peripheral_mask) { |
| info.si_signo = driver->dci_client_tbl[i].signal_type; |
| stat = send_sig_info( |
| driver->dci_client_tbl[i].signal_type, |
| &info, driver->dci_client_tbl[i].client); |
| if (stat) |
| pr_err("diag: Err sending dci signal to client, signal data: 0x%x, stat: %d\n", |
| info.si_int, stat); |
| } |
| } /* end of loop for all DCI clients */ |
| } |
| |
| int diag_send_dci_pkt(struct diag_master_table entry, unsigned char *buf, |
| int len, int index) |
| { |
| int i, status = 0; |
| unsigned int read_len = 0; |
| |
| /* The first 4 bytes is the uid tag and the next four bytes is |
| the minmum packet length of a request packet */ |
| if (len < DCI_PKT_REQ_MIN_LEN) { |
| pr_err("diag: dci: Invalid pkt len %d in %s\n", len, __func__); |
| return -EIO; |
| } |
| if (len > APPS_BUF_SIZE - 10) { |
| pr_err("diag: dci: Invalid payload length in %s\n", __func__); |
| return -EIO; |
| } |
| /* remove UID from user space pkt before sending to peripheral*/ |
| buf = buf + sizeof(int); |
| read_len += sizeof(int); |
| len = len - sizeof(int); |
| mutex_lock(&driver->dci_mutex); |
| /* prepare DCI packet */ |
| driver->apps_dci_buf[0] = CONTROL_CHAR; /* start */ |
| driver->apps_dci_buf[1] = 1; /* version */ |
| *(uint16_t *)(driver->apps_dci_buf + 2) = len + 4 + 1; /* length */ |
| driver->apps_dci_buf[4] = DCI_PKT_RSP_CODE; |
| *(int *)(driver->apps_dci_buf + 5) = |
| driver->req_tracking_tbl[index].tag; |
| for (i = 0; i < len; i++) |
| driver->apps_dci_buf[i+9] = *(buf+i); |
| read_len += len; |
| driver->apps_dci_buf[9+len] = CONTROL_CHAR; /* end */ |
| if ((read_len + 9) >= USER_SPACE_DATA) { |
| pr_err("diag: dci: Invalid length while forming dci pkt in %s", |
| __func__); |
| mutex_unlock(&driver->dci_mutex); |
| return -EIO; |
| } |
| |
| for (i = 0; i < NUM_SMD_DCI_CHANNELS; i++) { |
| struct diag_smd_info *smd_info = driver->separate_cmdrsp[i] ? |
| &driver->smd_dci_cmd[i] : |
| &driver->smd_dci[i]; |
| if (entry.client_id == smd_info->peripheral) { |
| if (smd_info->ch) { |
| smd_write(smd_info->ch, |
| driver->apps_dci_buf, len + 10); |
| status = DIAG_DCI_NO_ERROR; |
| } |
| break; |
| } |
| } |
| |
| if (status != DIAG_DCI_NO_ERROR) { |
| pr_alert("diag: check DCI channel\n"); |
| status = DIAG_DCI_SEND_DATA_FAIL; |
| } |
| mutex_unlock(&driver->dci_mutex); |
| return status; |
| } |
| |
| int diag_register_dci_transaction(int uid) |
| { |
| int i, new_dci_client = 1, ret = -1; |
| |
| for (i = 0; i < dci_max_reg; i++) { |
| if (driver->req_tracking_tbl[i].pid == current->tgid) { |
| new_dci_client = 0; |
| break; |
| } |
| } |
| mutex_lock(&driver->dci_mutex); |
| /* Make an entry in kernel DCI table */ |
| driver->dci_tag++; |
| for (i = 0; i < dci_max_reg; i++) { |
| if (driver->req_tracking_tbl[i].pid == 0) { |
| driver->req_tracking_tbl[i].pid = current->tgid; |
| driver->req_tracking_tbl[i].uid = uid; |
| driver->req_tracking_tbl[i].tag = driver->dci_tag; |
| ret = i; |
| break; |
| } |
| } |
| mutex_unlock(&driver->dci_mutex); |
| return ret; |
| } |
| |
| int diag_process_dci_transaction(unsigned char *buf, int len) |
| { |
| unsigned char *temp = buf; |
| uint16_t subsys_cmd_code, log_code, item_num; |
| int subsys_id, cmd_code, ret = -1, index = -1, found = 0; |
| struct diag_master_table entry; |
| int count, set_mask, num_codes, bit_index, event_id, offset = 0, i; |
| unsigned int byte_index, read_len = 0; |
| uint8_t equip_id, *log_mask_ptr, *head_log_mask_ptr, byte_mask; |
| uint8_t *event_mask_ptr; |
| |
| if (!driver->smd_dci[MODEM_DATA].ch) { |
| pr_err("diag: DCI smd channel for peripheral %d not valid for dci updates\n", |
| driver->smd_dci[MODEM_DATA].peripheral); |
| return DIAG_DCI_SEND_DATA_FAIL; |
| } |
| |
| if (!temp) { |
| pr_err("diag: Invalid buffer in %s\n", __func__); |
| return -ENOMEM; |
| } |
| |
| /* This is Pkt request/response transaction */ |
| if (*(int *)temp > 0) { |
| if (len < DCI_PKT_REQ_MIN_LEN || len > USER_SPACE_DATA) { |
| pr_err("diag: dci: Invalid length %d len in %s", len, |
| __func__); |
| return -EIO; |
| } |
| /* enter this UID into kernel table and return index */ |
| index = diag_register_dci_transaction(*(int *)temp); |
| if (index < 0) { |
| pr_alert("diag: registering new DCI transaction failed\n"); |
| return DIAG_DCI_NO_REG; |
| } |
| temp += sizeof(int); |
| /* |
| * Check for registered peripheral and fwd pkt to |
| * appropriate proc |
| */ |
| cmd_code = (int)(*(char *)temp); |
| temp++; |
| subsys_id = (int)(*(char *)temp); |
| temp++; |
| subsys_cmd_code = *(uint16_t *)temp; |
| temp += sizeof(uint16_t); |
| read_len += sizeof(int) + 2 + sizeof(uint16_t); |
| if (read_len >= USER_SPACE_DATA) { |
| pr_err("diag: dci: Invalid length in %s\n", __func__); |
| return -EIO; |
| } |
| pr_debug("diag: %d %d %d", cmd_code, subsys_id, |
| subsys_cmd_code); |
| for (i = 0; i < diag_max_reg; i++) { |
| entry = driver->table[i]; |
| if (entry.process_id != NO_PROCESS) { |
| if (entry.cmd_code == cmd_code && |
| entry.subsys_id == subsys_id && |
| entry.cmd_code_lo <= subsys_cmd_code && |
| entry.cmd_code_hi >= subsys_cmd_code) { |
| ret = diag_send_dci_pkt(entry, buf, |
| len, index); |
| } else if (entry.cmd_code == 255 |
| && cmd_code == 75) { |
| if (entry.subsys_id == subsys_id && |
| entry.cmd_code_lo <= |
| subsys_cmd_code && |
| entry.cmd_code_hi >= |
| subsys_cmd_code) { |
| ret = diag_send_dci_pkt(entry, |
| buf, len, index); |
| } |
| } else if (entry.cmd_code == 255 && |
| entry.subsys_id == 255) { |
| if (entry.cmd_code_lo <= cmd_code && |
| entry.cmd_code_hi >= |
| cmd_code) { |
| ret = diag_send_dci_pkt(entry, |
| buf, len, index); |
| } |
| } |
| } |
| } |
| } else if (*(int *)temp == DCI_LOG_TYPE) { |
| /* Minimum length of a log mask config is 12 + 2 bytes for |
| atleast one log code to be set or reset */ |
| if (len < DCI_LOG_CON_MIN_LEN || len > USER_SPACE_DATA) { |
| pr_err("diag: dci: Invalid length in %s\n", __func__); |
| return -EIO; |
| } |
| /* find client id and table */ |
| i = diag_dci_find_client_index(current->tgid); |
| if (i == DCI_CLIENT_INDEX_INVALID) { |
| pr_err("diag: dci client not registered/found\n"); |
| return ret; |
| } |
| /* Extract each log code and put in client table */ |
| temp += sizeof(int); |
| read_len += sizeof(int); |
| set_mask = *(int *)temp; |
| temp += sizeof(int); |
| read_len += sizeof(int); |
| num_codes = *(int *)temp; |
| temp += sizeof(int); |
| read_len += sizeof(int); |
| |
| if (num_codes == 0 || (num_codes >= (USER_SPACE_DATA - 8)/2)) { |
| pr_err("diag: dci: Invalid number of log codes %d\n", |
| num_codes); |
| return -EIO; |
| } |
| |
| head_log_mask_ptr = driver->dci_client_tbl[i].dci_log_mask; |
| if (!head_log_mask_ptr) { |
| pr_err("diag: dci: Invalid Log mask pointer in %s\n", |
| __func__); |
| return -ENOMEM; |
| } |
| pr_debug("diag: head of dci log mask %p\n", head_log_mask_ptr); |
| count = 0; /* iterator for extracting log codes */ |
| while (count < num_codes) { |
| if (read_len >= USER_SPACE_DATA) { |
| pr_err("diag: dci: Invalid length for log type in %s", |
| __func__); |
| return -EIO; |
| } |
| log_code = *(uint16_t *)temp; |
| equip_id = LOG_GET_EQUIP_ID(log_code); |
| item_num = LOG_GET_ITEM_NUM(log_code); |
| byte_index = item_num/8 + 2; |
| if (byte_index >= (DCI_MAX_ITEMS_PER_LOG_CODE+2)) { |
| pr_err("diag: dci: Log type, invalid byte index\n"); |
| return ret; |
| } |
| byte_mask = 0x01 << (item_num % 8); |
| /* |
| * Parse through log mask table and find |
| * relevant range |
| */ |
| log_mask_ptr = head_log_mask_ptr; |
| found = 0; |
| offset = 0; |
| while (log_mask_ptr && (offset < DCI_LOG_MASK_SIZE)) { |
| if (*log_mask_ptr == equip_id) { |
| found = 1; |
| pr_debug("diag: find equip id = %x at %p\n", |
| equip_id, log_mask_ptr); |
| break; |
| } else { |
| pr_debug("diag: did not find equip id = %x at %p\n", |
| equip_id, log_mask_ptr); |
| log_mask_ptr += 514; |
| offset += 514; |
| } |
| } |
| if (!found) { |
| pr_err("diag: dci equip id not found\n"); |
| return ret; |
| } |
| *(log_mask_ptr+1) = 1; /* set the dirty byte */ |
| log_mask_ptr = log_mask_ptr + byte_index; |
| if (set_mask) |
| *log_mask_ptr |= byte_mask; |
| else |
| *log_mask_ptr &= ~byte_mask; |
| /* add to cumulative mask */ |
| update_dci_cumulative_log_mask( |
| offset, byte_index, |
| byte_mask); |
| temp += 2; |
| read_len += 2; |
| count++; |
| ret = DIAG_DCI_NO_ERROR; |
| } |
| /* send updated mask to peripherals */ |
| ret = diag_send_dci_log_mask(driver->smd_cntl[MODEM_DATA].ch); |
| } else if (*(int *)temp == DCI_EVENT_TYPE) { |
| /* Minimum length of a event mask config is 12 + 4 bytes for |
| atleast one event id to be set or reset. */ |
| if (len < DCI_EVENT_CON_MIN_LEN || len > USER_SPACE_DATA) { |
| pr_err("diag: dci: Invalid length in %s\n", __func__); |
| return -EIO; |
| } |
| /* find client id and table */ |
| i = diag_dci_find_client_index(current->tgid); |
| if (i == DCI_CLIENT_INDEX_INVALID) { |
| pr_err("diag: dci client not registered/found\n"); |
| return ret; |
| } |
| /* Extract each log code and put in client table */ |
| temp += sizeof(int); |
| read_len += sizeof(int); |
| set_mask = *(int *)temp; |
| temp += sizeof(int); |
| read_len += sizeof(int); |
| num_codes = *(int *)temp; |
| temp += sizeof(int); |
| read_len += sizeof(int); |
| |
| /* Check for positive number of event ids. Also, the number of |
| event ids should fit in the buffer along with set_mask and |
| num_codes which are 4 bytes each */ |
| if (num_codes == 0 || (num_codes >= (USER_SPACE_DATA - 8)/2)) { |
| pr_err("diag: dci: Invalid number of event ids %d\n", |
| num_codes); |
| return -EIO; |
| } |
| |
| event_mask_ptr = driver->dci_client_tbl[i].dci_event_mask; |
| if (!event_mask_ptr) { |
| pr_err("diag: dci: Invalid event mask pointer in %s\n", |
| __func__); |
| return -ENOMEM; |
| } |
| pr_debug("diag: head of dci event mask %p\n", event_mask_ptr); |
| count = 0; /* iterator for extracting log codes */ |
| while (count < num_codes) { |
| if (read_len >= USER_SPACE_DATA) { |
| pr_err("diag: dci: Invalid length for event type in %s", |
| __func__); |
| return -EIO; |
| } |
| event_id = *(int *)temp; |
| byte_index = event_id/8; |
| if (byte_index >= DCI_EVENT_MASK_SIZE) { |
| pr_err("diag: dci: Event type, invalid byte index\n"); |
| return ret; |
| } |
| bit_index = event_id % 8; |
| byte_mask = 0x1 << bit_index; |
| /* |
| * Parse through event mask table and set |
| * relevant byte & bit combination |
| */ |
| if (set_mask) |
| *(event_mask_ptr + byte_index) |= byte_mask; |
| else |
| *(event_mask_ptr + byte_index) &= ~byte_mask; |
| /* add to cumulative mask */ |
| update_dci_cumulative_event_mask(byte_index, byte_mask); |
| temp += sizeof(int); |
| read_len += sizeof(int); |
| count++; |
| ret = DIAG_DCI_NO_ERROR; |
| } |
| /* send updated mask to peripherals */ |
| ret = diag_send_dci_event_mask(driver->smd_cntl[MODEM_DATA].ch); |
| } else { |
| pr_alert("diag: Incorrect DCI transaction\n"); |
| } |
| return ret; |
| } |
| |
| int diag_dci_find_client_index(int client_id) |
| { |
| int i, ret = DCI_CLIENT_INDEX_INVALID; |
| |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| if (driver->dci_client_tbl[i].client != NULL) { |
| if (driver->dci_client_tbl[i].client->tgid == |
| client_id) { |
| ret = i; |
| break; |
| } |
| } |
| } |
| return ret; |
| } |
| |
| void update_dci_cumulative_event_mask(int offset, uint8_t byte_mask) |
| { |
| int i; |
| uint8_t *event_mask_ptr; |
| uint8_t *update_ptr = dci_cumulative_event_mask; |
| bool is_set = false; |
| |
| mutex_lock(&dci_event_mask_mutex); |
| update_ptr += offset; |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| event_mask_ptr = |
| driver->dci_client_tbl[i].dci_event_mask; |
| event_mask_ptr += offset; |
| if ((*event_mask_ptr & byte_mask) == byte_mask) { |
| is_set = true; |
| /* break even if one client has the event mask set */ |
| break; |
| } |
| } |
| if (is_set == false) |
| *update_ptr &= ~byte_mask; |
| else |
| *update_ptr |= byte_mask; |
| mutex_unlock(&dci_event_mask_mutex); |
| } |
| |
| void clear_client_dci_cumulative_event_mask(int client_index) |
| { |
| int i, j; |
| uint8_t *update_ptr = dci_cumulative_event_mask; |
| uint8_t *event_mask_ptr, *client_event_mask_ptr, byte_mask = 0; |
| bool is_set = false; |
| |
| event_mask_ptr = |
| (driver->dci_client_tbl[client_index].dci_event_mask); |
| |
| mutex_lock(&dci_event_mask_mutex); |
| for (i = 0; i < DCI_EVENT_MASK_SIZE; i++) { |
| is_set = false; |
| /* Already cleared event masks need not to be considered */ |
| if (*event_mask_ptr != 0) { |
| byte_mask = *event_mask_ptr; |
| } else { |
| update_ptr++; |
| event_mask_ptr++; |
| continue; |
| } |
| for (j = 0; j < MAX_DCI_CLIENTS; j++) { |
| /* continue searching for valid client */ |
| if (driver->dci_client_tbl[j].client == NULL || |
| client_index == j) |
| continue; |
| client_event_mask_ptr = |
| (driver->dci_client_tbl[j].dci_event_mask); |
| client_event_mask_ptr += i; |
| if (*client_event_mask_ptr & byte_mask) { |
| /* |
| * Break if another client has same |
| * event mask set |
| */ |
| if ((*client_event_mask_ptr & |
| byte_mask) == byte_mask) { |
| is_set = true; |
| break; |
| } else { |
| byte_mask = |
| (~(*client_event_mask_ptr) & |
| byte_mask); |
| is_set = false; |
| } |
| } |
| } |
| /* |
| * Clear only if this client has event mask set else |
| * don't update cumulative event mask ptr |
| */ |
| if (is_set == false) |
| *update_ptr &= ~byte_mask; |
| |
| update_ptr++; |
| event_mask_ptr++; |
| } |
| event_mask_ptr = |
| (driver->dci_client_tbl[client_index].dci_event_mask); |
| memset(event_mask_ptr, 0, DCI_EVENT_MASK_SIZE); |
| mutex_unlock(&dci_event_mask_mutex); |
| } |
| |
| |
| int diag_send_dci_event_mask(smd_channel_t *ch) |
| { |
| void *buf = driver->buf_event_mask_update; |
| int header_size = sizeof(struct diag_ctrl_event_mask); |
| int wr_size = -ENOMEM, retry_count = 0, timer; |
| int ret = DIAG_DCI_NO_ERROR; |
| |
| mutex_lock(&driver->diag_cntl_mutex); |
| /* send event mask update */ |
| driver->event_mask->cmd_type = DIAG_CTRL_MSG_EVENT_MASK; |
| driver->event_mask->data_len = 7 + DCI_EVENT_MASK_SIZE; |
| driver->event_mask->stream_id = DCI_MASK_STREAM; |
| driver->event_mask->status = 3; /* status for valid mask */ |
| driver->event_mask->event_config = 1; /* event config */ |
| driver->event_mask->event_mask_size = DCI_EVENT_MASK_SIZE; |
| memcpy(buf, driver->event_mask, header_size); |
| memcpy(buf+header_size, dci_cumulative_event_mask, DCI_EVENT_MASK_SIZE); |
| if (ch) { |
| while (retry_count < 3) { |
| wr_size = smd_write(ch, buf, |
| header_size + DCI_EVENT_MASK_SIZE); |
| if (wr_size == -ENOMEM) { |
| retry_count++; |
| for (timer = 0; timer < 5; timer++) |
| udelay(2000); |
| } else { |
| break; |
| } |
| } |
| if (wr_size != header_size + DCI_EVENT_MASK_SIZE) { |
| pr_err("diag: error writing dci event mask %d, tried %d\n", |
| wr_size, header_size + DCI_EVENT_MASK_SIZE); |
| ret = DIAG_DCI_SEND_DATA_FAIL; |
| } |
| } else { |
| pr_err("diag: ch not valid for dci event mask update\n"); |
| ret = DIAG_DCI_SEND_DATA_FAIL; |
| } |
| mutex_unlock(&driver->diag_cntl_mutex); |
| |
| return ret; |
| } |
| |
| void update_dci_cumulative_log_mask(int offset, unsigned int byte_index, |
| uint8_t byte_mask) |
| { |
| int i; |
| uint8_t *update_ptr = dci_cumulative_log_mask; |
| uint8_t *log_mask_ptr; |
| bool is_set = false; |
| |
| mutex_lock(&dci_log_mask_mutex); |
| *update_ptr = 0; |
| /* set the equipment IDs */ |
| for (i = 0; i < 16; i++) |
| *(update_ptr + (i*514)) = i; |
| |
| update_ptr += offset; |
| /* update the dirty bit */ |
| *(update_ptr+1) = 1; |
| update_ptr = update_ptr + byte_index; |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| log_mask_ptr = |
| (driver->dci_client_tbl[i].dci_log_mask); |
| log_mask_ptr = log_mask_ptr + offset + byte_index; |
| if ((*log_mask_ptr & byte_mask) == byte_mask) { |
| is_set = true; |
| /* break even if one client has the log mask set */ |
| break; |
| } |
| } |
| |
| if (is_set == false) |
| *update_ptr &= ~byte_mask; |
| else |
| *update_ptr |= byte_mask; |
| mutex_unlock(&dci_log_mask_mutex); |
| } |
| |
| void clear_client_dci_cumulative_log_mask(int client_index) |
| { |
| int i, j, k; |
| uint8_t *update_ptr = dci_cumulative_log_mask; |
| uint8_t *log_mask_ptr, *client_log_mask_ptr, byte_mask = 0; |
| bool is_set = false; |
| |
| log_mask_ptr = driver->dci_client_tbl[client_index].dci_log_mask; |
| |
| mutex_lock(&dci_log_mask_mutex); |
| *update_ptr = 0; |
| /* set the equipment IDs */ |
| for (i = 0; i < 16; i++) |
| *(update_ptr + (i*514)) = i; |
| |
| /* update cumulative log mask ptr*/ |
| update_ptr += 2; |
| log_mask_ptr += 2; |
| for (i = 0; i < 16; i++) { |
| for (j = 0; j < 512; j++) { |
| is_set = false; |
| /* |
| * Already cleared log masks need |
| * not to be considered |
| */ |
| if (*log_mask_ptr != 0) { |
| byte_mask = *log_mask_ptr; |
| } else { |
| update_ptr++; |
| log_mask_ptr++; |
| continue; |
| } |
| for (k = 0; k < MAX_DCI_CLIENTS; k++) { |
| /* continue searching for valid client */ |
| if (driver->dci_client_tbl[k].client == NULL || |
| client_index == k) |
| continue; |
| client_log_mask_ptr = |
| (driver->dci_client_tbl[k].dci_log_mask); |
| client_log_mask_ptr += (i*514) + 2 + j; |
| if (*client_log_mask_ptr & byte_mask) { |
| /* |
| * Break if another client has same |
| * log mask set |
| */ |
| if ((*client_log_mask_ptr & |
| byte_mask) == byte_mask) { |
| is_set = true; |
| break; |
| } else { |
| byte_mask = |
| (~(*client_log_mask_ptr) & |
| byte_mask); |
| is_set = false; |
| } |
| } |
| } |
| /* |
| * Clear only if this client has log mask set else |
| * don't update cumulative log mask ptr |
| */ |
| if (is_set == false) { |
| /* |
| * Update the dirty bit for the equipment |
| * whose mask is changing |
| */ |
| dci_cumulative_log_mask[1+(i*514)] = 1; |
| *update_ptr &= ~byte_mask; |
| } |
| |
| update_ptr++; |
| log_mask_ptr++; |
| } |
| update_ptr += 2; |
| log_mask_ptr += 2; |
| } |
| log_mask_ptr = driver->dci_client_tbl[client_index].dci_log_mask; |
| memset(log_mask_ptr, 0, DCI_LOG_MASK_SIZE); |
| mutex_unlock(&dci_log_mask_mutex); |
| } |
| |
| int diag_send_dci_log_mask(smd_channel_t *ch) |
| { |
| void *buf = driver->buf_log_mask_update; |
| int header_size = sizeof(struct diag_ctrl_log_mask); |
| uint8_t *log_mask_ptr = dci_cumulative_log_mask; |
| int i, wr_size = -ENOMEM, retry_count = 0, timer; |
| int ret = DIAG_DCI_NO_ERROR; |
| |
| if (!ch) { |
| pr_err("diag: ch not valid for dci log mask update\n"); |
| return DIAG_DCI_SEND_DATA_FAIL; |
| } |
| |
| mutex_lock(&driver->diag_cntl_mutex); |
| for (i = 0; i < 16; i++) { |
| retry_count = 0; |
| driver->log_mask->cmd_type = DIAG_CTRL_MSG_LOG_MASK; |
| driver->log_mask->num_items = 512; |
| driver->log_mask->data_len = 11 + 512; |
| driver->log_mask->stream_id = DCI_MASK_STREAM; |
| driver->log_mask->status = 3; /* status for valid mask */ |
| driver->log_mask->equip_id = *log_mask_ptr; |
| driver->log_mask->log_mask_size = 512; |
| memcpy(buf, driver->log_mask, header_size); |
| memcpy(buf+header_size, log_mask_ptr+2, 512); |
| /* if dirty byte is set and channel is valid */ |
| if (ch && *(log_mask_ptr+1)) { |
| while (retry_count < 3) { |
| wr_size = smd_write(ch, buf, header_size + 512); |
| if (wr_size == -ENOMEM) { |
| retry_count++; |
| for (timer = 0; timer < 5; timer++) |
| udelay(2000); |
| } else |
| break; |
| } |
| if (wr_size != header_size + 512) { |
| pr_err("diag: dci log mask update failed %d, tried %d for equip_id %d\n", |
| wr_size, header_size + 512, |
| driver->log_mask->equip_id); |
| ret = DIAG_DCI_SEND_DATA_FAIL; |
| |
| } else { |
| *(log_mask_ptr+1) = 0; /* clear dirty byte */ |
| pr_debug("diag: updated dci log equip ID %d\n", |
| *log_mask_ptr); |
| } |
| } |
| log_mask_ptr += 514; |
| } |
| mutex_unlock(&driver->diag_cntl_mutex); |
| |
| return ret; |
| } |
| |
| void create_dci_log_mask_tbl(unsigned char *tbl_buf) |
| { |
| uint8_t i; int count = 0; |
| |
| /* create hard coded table for log mask with 16 categories */ |
| for (i = 0; i < 16; i++) { |
| *(uint8_t *)tbl_buf = i; |
| pr_debug("diag: put value %x at %p\n", i, tbl_buf); |
| memset(tbl_buf+1, 0, 513); /* set dirty bit as 0 */ |
| tbl_buf += 514; |
| count += 514; |
| } |
| } |
| |
| void create_dci_event_mask_tbl(unsigned char *tbl_buf) |
| { |
| memset(tbl_buf, 0, 512); |
| } |
| |
| static int diag_dci_probe(struct platform_device *pdev) |
| { |
| int err = 0; |
| int index; |
| |
| if (pdev->id == SMD_APPS_MODEM) { |
| index = MODEM_DATA; |
| err = smd_open("DIAG_2", |
| &driver->smd_dci[index].ch, |
| &driver->smd_dci[index], |
| diag_smd_notify); |
| driver->smd_dci[index].ch_save = |
| driver->smd_dci[index].ch; |
| driver->dci_device = &pdev->dev; |
| driver->dci_device->power.wakeup = wakeup_source_register |
| ("DIAG_DCI_WS"); |
| if (err) |
| pr_err("diag: In %s, cannot open DCI port, Id = %d, err: %d\n", |
| __func__, pdev->id, err); |
| } |
| |
| return err; |
| } |
| |
| static int diag_dci_cmd_probe(struct platform_device *pdev) |
| { |
| int err = 0; |
| int index; |
| |
| if (pdev->id == SMD_APPS_MODEM) { |
| index = MODEM_DATA; |
| err = smd_named_open_on_edge("DIAG_2_CMD", |
| pdev->id, |
| &driver->smd_dci_cmd[index].ch, |
| &driver->smd_dci_cmd[index], |
| diag_smd_notify); |
| driver->smd_dci_cmd[index].ch_save = |
| driver->smd_dci_cmd[index].ch; |
| driver->dci_cmd_device = &pdev->dev; |
| driver->dci_cmd_device->power.wakeup = wakeup_source_register |
| ("DIAG_DCI_CMD_WS"); |
| if (err) |
| pr_err("diag: In %s, cannot open DCI port, Id = %d, err: %d\n", |
| __func__, pdev->id, err); |
| } |
| |
| return err; |
| } |
| |
| static int diag_dci_runtime_suspend(struct device *dev) |
| { |
| dev_dbg(dev, "pm_runtime: suspending...\n"); |
| return 0; |
| } |
| |
| static int diag_dci_runtime_resume(struct device *dev) |
| { |
| dev_dbg(dev, "pm_runtime: resuming...\n"); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops diag_dci_dev_pm_ops = { |
| .runtime_suspend = diag_dci_runtime_suspend, |
| .runtime_resume = diag_dci_runtime_resume, |
| }; |
| |
| struct platform_driver msm_diag_dci_driver = { |
| .probe = diag_dci_probe, |
| .driver = { |
| .name = "DIAG_2", |
| .owner = THIS_MODULE, |
| .pm = &diag_dci_dev_pm_ops, |
| }, |
| }; |
| |
| struct platform_driver msm_diag_dci_cmd_driver = { |
| .probe = diag_dci_cmd_probe, |
| .driver = { |
| .name = "DIAG_2_CMD", |
| .owner = THIS_MODULE, |
| .pm = &diag_dci_dev_pm_ops, |
| }, |
| }; |
| |
| int diag_dci_init(void) |
| { |
| int success = 0; |
| int i; |
| |
| driver->dci_tag = 0; |
| driver->dci_client_id = 0; |
| driver->num_dci_client = 0; |
| driver->dci_device = NULL; |
| driver->dci_cmd_device = NULL; |
| mutex_init(&driver->dci_mutex); |
| mutex_init(&dci_log_mask_mutex); |
| mutex_init(&dci_event_mask_mutex); |
| mutex_init(&dci_health_mutex); |
| spin_lock_init(&ws_lock); |
| |
| for (i = 0; i < NUM_SMD_DCI_CHANNELS; i++) { |
| success = diag_smd_constructor(&driver->smd_dci[i], i, |
| SMD_DCI_TYPE); |
| if (!success) |
| goto err; |
| } |
| |
| if (driver->supports_separate_cmdrsp) { |
| for (i = 0; i < NUM_SMD_DCI_CMD_CHANNELS; i++) { |
| success = diag_smd_constructor(&driver->smd_dci_cmd[i], |
| i, SMD_DCI_CMD_TYPE); |
| if (!success) |
| goto err; |
| } |
| } |
| |
| if (driver->req_tracking_tbl == NULL) { |
| driver->req_tracking_tbl = kzalloc(dci_max_reg * |
| sizeof(struct dci_pkt_req_tracking_tbl), GFP_KERNEL); |
| if (driver->req_tracking_tbl == NULL) |
| goto err; |
| } |
| if (driver->apps_dci_buf == NULL) { |
| driver->apps_dci_buf = kzalloc(APPS_BUF_SIZE, GFP_KERNEL); |
| if (driver->apps_dci_buf == NULL) |
| goto err; |
| } |
| if (driver->dci_client_tbl == NULL) { |
| driver->dci_client_tbl = kzalloc(MAX_DCI_CLIENTS * |
| sizeof(struct diag_dci_client_tbl), GFP_KERNEL); |
| if (driver->dci_client_tbl == NULL) |
| goto err; |
| } |
| driver->diag_dci_wq = create_singlethread_workqueue("diag_dci_wq"); |
| success = platform_driver_register(&msm_diag_dci_driver); |
| if (success) { |
| pr_err("diag: Could not register DCI driver\n"); |
| goto err; |
| } |
| if (driver->supports_separate_cmdrsp) { |
| success = platform_driver_register(&msm_diag_dci_cmd_driver); |
| if (success) { |
| pr_err("diag: Could not register DCI cmd driver\n"); |
| goto err; |
| } |
| } |
| return DIAG_DCI_NO_ERROR; |
| err: |
| pr_err("diag: Could not initialize diag DCI buffers"); |
| kfree(driver->req_tracking_tbl); |
| kfree(driver->dci_client_tbl); |
| kfree(driver->apps_dci_buf); |
| for (i = 0; i < NUM_SMD_DCI_CHANNELS; i++) |
| diag_smd_destructor(&driver->smd_dci[i]); |
| |
| if (driver->supports_separate_cmdrsp) |
| for (i = 0; i < NUM_SMD_DCI_CMD_CHANNELS; i++) |
| diag_smd_destructor(&driver->smd_dci_cmd[i]); |
| |
| if (driver->diag_dci_wq) |
| destroy_workqueue(driver->diag_dci_wq); |
| mutex_destroy(&driver->dci_mutex); |
| mutex_destroy(&dci_log_mask_mutex); |
| mutex_destroy(&dci_event_mask_mutex); |
| mutex_destroy(&dci_health_mutex); |
| return DIAG_DCI_NO_REG; |
| } |
| |
| void diag_dci_exit(void) |
| { |
| int i; |
| |
| for (i = 0; i < NUM_SMD_DCI_CHANNELS; i++) |
| diag_smd_destructor(&driver->smd_dci[i]); |
| |
| platform_driver_unregister(&msm_diag_dci_driver); |
| |
| if (driver->dci_client_tbl) { |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| kfree(driver->dci_client_tbl[i].dci_data); |
| mutex_destroy(&driver->dci_client_tbl[i].data_mutex); |
| } |
| } |
| |
| if (driver->supports_separate_cmdrsp) { |
| for (i = 0; i < NUM_SMD_DCI_CMD_CHANNELS; i++) |
| diag_smd_destructor(&driver->smd_dci_cmd[i]); |
| |
| platform_driver_unregister(&msm_diag_dci_cmd_driver); |
| } |
| kfree(driver->req_tracking_tbl); |
| kfree(driver->dci_client_tbl); |
| kfree(driver->apps_dci_buf); |
| mutex_destroy(&driver->dci_mutex); |
| mutex_destroy(&dci_log_mask_mutex); |
| mutex_destroy(&dci_event_mask_mutex); |
| mutex_destroy(&dci_health_mutex); |
| destroy_workqueue(driver->diag_dci_wq); |
| } |
| |
| int diag_dci_clear_log_mask() |
| { |
| int i, j, k, err = DIAG_DCI_NO_ERROR; |
| uint8_t *log_mask_ptr, *update_ptr; |
| |
| i = diag_dci_find_client_index(current->tgid); |
| if (i == DCI_CLIENT_INDEX_INVALID) |
| return DIAG_DCI_TABLE_ERR; |
| |
| mutex_lock(&dci_log_mask_mutex); |
| create_dci_log_mask_tbl( |
| driver->dci_client_tbl[i].dci_log_mask); |
| memset(dci_cumulative_log_mask, |
| 0x0, DCI_LOG_MASK_SIZE); |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| update_ptr = dci_cumulative_log_mask; |
| if (driver->dci_client_tbl[i].client) { |
| log_mask_ptr = |
| driver->dci_client_tbl[i].dci_log_mask; |
| for (j = 0; j < 16; j++) { |
| *update_ptr = j; |
| *(update_ptr + 1) = 1; |
| update_ptr += 2; |
| log_mask_ptr += 2; |
| for (k = 0; k < 513; k++) { |
| *update_ptr |= *log_mask_ptr; |
| update_ptr++; |
| log_mask_ptr++; |
| } |
| } |
| } |
| } |
| mutex_unlock(&dci_log_mask_mutex); |
| err = diag_send_dci_log_mask(driver->smd_cntl[MODEM_DATA].ch); |
| return err; |
| } |
| |
| int diag_dci_clear_event_mask() |
| { |
| int i, j, err = DIAG_DCI_NO_ERROR; |
| uint8_t *event_mask_ptr, *update_ptr; |
| |
| i = diag_dci_find_client_index(current->tgid); |
| if (i == DCI_CLIENT_INDEX_INVALID) |
| return DIAG_DCI_TABLE_ERR; |
| |
| mutex_lock(&dci_event_mask_mutex); |
| memset(driver->dci_client_tbl[i].dci_event_mask, |
| 0x0, DCI_EVENT_MASK_SIZE); |
| memset(dci_cumulative_event_mask, |
| 0x0, DCI_EVENT_MASK_SIZE); |
| update_ptr = dci_cumulative_event_mask; |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) { |
| event_mask_ptr = |
| driver->dci_client_tbl[i].dci_event_mask; |
| for (j = 0; j < DCI_EVENT_MASK_SIZE; j++) |
| *(update_ptr + j) |= *(event_mask_ptr + j); |
| } |
| mutex_unlock(&dci_event_mask_mutex); |
| err = diag_send_dci_event_mask(driver->smd_cntl[MODEM_DATA].ch); |
| return err; |
| } |
| |
| int diag_dci_query_log_mask(uint16_t log_code) |
| { |
| uint16_t item_num; |
| uint8_t equip_id, *log_mask_ptr, byte_mask; |
| int i, byte_index, offset; |
| |
| equip_id = LOG_GET_EQUIP_ID(log_code); |
| item_num = LOG_GET_ITEM_NUM(log_code); |
| byte_index = item_num/8 + 2; |
| byte_mask = 0x01 << (item_num % 8); |
| offset = equip_id * 514; |
| |
| i = diag_dci_find_client_index(current->tgid); |
| if (i != DCI_CLIENT_INDEX_INVALID) { |
| log_mask_ptr = driver->dci_client_tbl[i].dci_log_mask; |
| log_mask_ptr = log_mask_ptr + offset + byte_index; |
| return ((*log_mask_ptr & byte_mask) == byte_mask) ? |
| 1 : 0; |
| } |
| return 0; |
| } |
| |
| |
| int diag_dci_query_event_mask(uint16_t event_id) |
| { |
| uint8_t *event_mask_ptr, byte_mask; |
| int i, byte_index, bit_index; |
| byte_index = event_id/8; |
| bit_index = event_id % 8; |
| byte_mask = 0x1 << bit_index; |
| |
| i = diag_dci_find_client_index(current->tgid); |
| if (i != DCI_CLIENT_INDEX_INVALID) { |
| event_mask_ptr = |
| driver->dci_client_tbl[i].dci_event_mask; |
| event_mask_ptr = event_mask_ptr + byte_index; |
| if ((*event_mask_ptr & byte_mask) == byte_mask) |
| return 1; |
| else |
| return 0; |
| } |
| return 0; |
| } |
| |
| uint8_t diag_dci_get_cumulative_real_time() |
| { |
| uint8_t real_time = MODE_NONREALTIME, i; |
| for (i = 0; i < MAX_DCI_CLIENTS; i++) |
| if (driver->dci_client_tbl[i].client && |
| driver->dci_client_tbl[i].real_time == |
| MODE_REALTIME) { |
| real_time = 1; |
| break; |
| } |
| return real_time; |
| } |
| |
| int diag_dci_set_real_time(int client_id, uint8_t real_time) |
| { |
| int i = DCI_CLIENT_INDEX_INVALID; |
| i = diag_dci_find_client_index(client_id); |
| |
| if (i != DCI_CLIENT_INDEX_INVALID) |
| driver->dci_client_tbl[i].real_time = real_time; |
| return i; |
| } |
| |
| void diag_dci_try_activate_wakeup_source(smd_channel_t *channel) |
| { |
| spin_lock_irqsave(&ws_lock, ws_lock_flags); |
| if (channel == driver->smd_dci[MODEM_DATA].ch) { |
| pm_wakeup_event(driver->dci_device, DCI_WAKEUP_TIMEOUT); |
| pm_stay_awake(driver->dci_device); |
| } else if (channel == driver->smd_dci_cmd[MODEM_DATA].ch) { |
| pm_wakeup_event(driver->dci_cmd_device, DCI_WAKEUP_TIMEOUT); |
| pm_stay_awake(driver->dci_cmd_device); |
| } |
| spin_unlock_irqrestore(&ws_lock, ws_lock_flags); |
| } |
| |
| void diag_dci_try_deactivate_wakeup_source(smd_channel_t *channel) |
| { |
| spin_lock_irqsave(&ws_lock, ws_lock_flags); |
| if (channel == driver->smd_dci[MODEM_DATA].ch) |
| pm_relax(driver->dci_device); |
| else if (channel == driver->smd_dci_cmd[MODEM_DATA].ch) |
| pm_relax(driver->dci_cmd_device); |
| spin_unlock_irqrestore(&ws_lock, ws_lock_flags); |
| } |