| # |
| # Multimedia Video device configuration |
| # |
| |
| menu "Video For Linux" |
| depends on VIDEO_DEV |
| |
| comment "Video Adapters" |
| |
| config VIDEO_ADV_DEBUG |
| bool "Enable advanced debug functionality" |
| depends on VIDEO_DEV |
| default n |
| ---help--- |
| Say Y here to enable advanced debugging functionality on some |
| V4L devices. |
| In doubt, say N. |
| |
| source "drivers/media/video/bt8xx/Kconfig" |
| |
| config VIDEO_SAA6588 |
| tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards" |
| depends on VIDEO_DEV && I2C && VIDEO_BT848 |
| |
| help |
| Support for Radio Data System (RDS) decoder. This allows seeing |
| radio station identification transmitted using this standard. |
| Currentlly, it works only with bt8x8 chips. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa6588. |
| |
| config VIDEO_PMS |
| tristate "Mediavision Pro Movie Studio Video For Linux" |
| depends on VIDEO_DEV && ISA |
| help |
| Say Y if you have such a thing. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pms. |
| |
| config VIDEO_PLANB |
| tristate "PlanB Video-In on PowerMac" |
| depends on PPC_PMAC && VIDEO_DEV && BROKEN |
| help |
| PlanB is the V4L driver for the PowerMac 7x00/8x00 series video |
| input hardware. If you want to experiment with this, say Y. |
| Otherwise, or if you don't understand a word, say N. See |
| <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info. |
| |
| Saying M will compile this driver as a module (planb). |
| |
| config VIDEO_BWQCAM |
| tristate "Quickcam BW Video For Linux" |
| depends on VIDEO_DEV && PARPORT |
| help |
| Say Y have if you the black and white version of the QuickCam |
| camera. See the next option for the color version. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bw-qcam. |
| |
| config VIDEO_CQCAM |
| tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)" |
| depends on EXPERIMENTAL && VIDEO_DEV && PARPORT |
| help |
| This is the video4linux driver for the colour version of the |
| Connectix QuickCam. If you have one of these cameras, say Y here, |
| otherwise say N. This driver does not work with the original |
| monochrome QuickCam, QuickCam VC or QuickClip. It is also available |
| as a module (c-qcam). |
| Read <file:Documentation/video4linux/CQcam.txt> for more information. |
| |
| config VIDEO_W9966 |
| tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" |
| depends on PARPORT_1284 && VIDEO_DEV && PARPORT |
| help |
| Video4linux driver for Winbond's w9966 based Webcams. |
| Currently tested with the LifeView FlyCam Supra. |
| If you have one of these cameras, say Y here |
| otherwise say N. |
| This driver is also available as a module (w9966). |
| |
| Check out <file:Documentation/video4linux/w9966.txt> for more |
| information. |
| |
| config VIDEO_CPIA |
| tristate "CPiA Video For Linux" |
| depends on VIDEO_DEV |
| ---help--- |
| This is the video4linux driver for cameras based on Vision's CPiA |
| (Colour Processor Interface ASIC), such as the Creative Labs Video |
| Blaster Webcam II. If you have one of these cameras, say Y here |
| and select parallel port and/or USB lowlevel support below, |
| otherwise say N. This will not work with the Creative Webcam III. |
| |
| Please read <file:Documentation/video4linux/README.cpia> for more |
| information. |
| |
| This driver is also available as a module (cpia). |
| |
| config VIDEO_CPIA_PP |
| tristate "CPiA Parallel Port Lowlevel Support" |
| depends on PARPORT_1284 && VIDEO_CPIA && PARPORT |
| help |
| This is the lowlevel parallel port support for cameras based on |
| Vision's CPiA (Colour Processor Interface ASIC), such as the |
| Creative Webcam II. If you have the parallel port version of one |
| of these cameras, say Y here, otherwise say N. It is also available |
| as a module (cpia_pp). |
| |
| config VIDEO_CPIA_USB |
| tristate "CPiA USB Lowlevel Support" |
| depends on VIDEO_CPIA && USB |
| help |
| This is the lowlevel USB support for cameras based on Vision's CPiA |
| (Colour Processor Interface ASIC), such as the Creative Webcam II. |
| If you have the USB version of one of these cameras, say Y here, |
| otherwise say N. This will not work with the Creative Webcam III. |
| It is also available as a module (cpia_usb). |
| |
| source "drivers/media/video/cpia2/Kconfig" |
| |
| config VIDEO_SAA5246A |
| tristate "SAA5246A, SAA5281 Teletext processor" |
| depends on VIDEO_DEV && I2C |
| help |
| Support for I2C bus based teletext using the SAA5246A or SAA5281 |
| chip. Useful only if you live in Europe. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa5246a. |
| |
| config VIDEO_SAA5249 |
| tristate "SAA5249 Teletext processor" |
| depends on VIDEO_DEV && I2C |
| help |
| Support for I2C bus based teletext using the SAA5249 chip. At the |
| moment this is only useful on some European WinTV cards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa5249. |
| |
| config TUNER_3036 |
| tristate "SAB3036 tuner" |
| depends on VIDEO_DEV && I2C |
| help |
| Say Y here to include support for Philips SAB3036 compatible tuners. |
| If in doubt, say N. |
| |
| config VIDEO_VINO |
| tristate "SGI Vino Video For Linux (EXPERIMENTAL)" |
| depends on VIDEO_DEV && I2C && SGI_IP22 && EXPERIMENTAL |
| select I2C_ALGO_SGI |
| help |
| Say Y here to build in support for the Vino video input system found |
| on SGI Indy machines. |
| |
| config VIDEO_STRADIS |
| tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)" |
| depends on EXPERIMENTAL && VIDEO_DEV && PCI |
| help |
| Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video |
| driver for PCI. There is a product page at |
| <http://www.stradis.com/>. |
| |
| config VIDEO_ZORAN |
| tristate "Zoran ZR36057/36067 Video For Linux" |
| depends on VIDEO_DEV && PCI && I2C_ALGOBIT |
| help |
| Say Y for support for MJPEG capture cards based on the Zoran |
| 36057/36067 PCI controller chipset. This includes the Iomega |
| Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is |
| a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For |
| more information, check <file:Documentation/video4linux/Zoran>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called zr36067. |
| |
| config VIDEO_ZORAN_BUZ |
| tristate "Iomega Buz support" |
| depends on VIDEO_ZORAN |
| help |
| Support for the Iomega Buz MJPEG capture/playback card. |
| |
| config VIDEO_ZORAN_DC10 |
| tristate "Pinnacle/Miro DC10(+) support" |
| depends on VIDEO_ZORAN |
| help |
| Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback |
| card. |
| |
| config VIDEO_ZORAN_DC30 |
| tristate "Pinnacle/Miro DC30(+) support" |
| depends on VIDEO_ZORAN |
| help |
| Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback |
| card. This also supports really old DC10 cards based on the |
| zr36050 MJPEG codec and zr36016 VFE. |
| |
| config VIDEO_ZORAN_LML33 |
| tristate "Linux Media Labs LML33 support" |
| depends on VIDEO_ZORAN |
| help |
| Support for the Linux Media Labs LML33 MJPEG capture/playback |
| card. |
| |
| config VIDEO_ZORAN_LML33R10 |
| tristate "Linux Media Labs LML33R10 support" |
| depends on VIDEO_ZORAN |
| help |
| support for the Linux Media Labs LML33R10 MJPEG capture/playback |
| card. |
| |
| config VIDEO_ZR36120 |
| tristate "Zoran ZR36120/36125 Video For Linux" |
| depends on VIDEO_DEV && PCI && I2C && BROKEN |
| help |
| Support for ZR36120/ZR36125 based frame grabber/overlay boards. |
| This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV, |
| and Buster boards. Please read the material in |
| <file:Documentation/video4linux/zr36120.txt> for more information. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called zr36120. |
| |
| config VIDEO_MEYE |
| tristate "Sony Vaio Picturebook Motion Eye Video For Linux" |
| depends on VIDEO_DEV && PCI && SONYPI |
| ---help--- |
| This is the video4linux driver for the Motion Eye camera found |
| in the Vaio Picturebook laptops. Please read the material in |
| <file:Documentation/video4linux/meye.txt> for more information. |
| |
| If you say Y or M here, you need to say Y or M to "Sony Programmable |
| I/O Control Device" in the character device section. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called meye. |
| |
| source "drivers/media/video/saa7134/Kconfig" |
| |
| config VIDEO_MXB |
| tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" |
| depends on VIDEO_DEV && PCI |
| select VIDEO_SAA7146_VV |
| select VIDEO_TUNER |
| ---help--- |
| This is a video4linux driver for the 'Multimedia eXtension Board' |
| TV card by Siemens-Nixdorf. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mxb. |
| |
| config VIDEO_DPC |
| tristate "Philips-Semiconductors 'dpc7146 demonstration board'" |
| depends on VIDEO_DEV && PCI |
| select VIDEO_SAA7146_VV |
| ---help--- |
| This is a video4linux driver for the 'dpc7146 demonstration |
| board' by Philips-Semiconductors. It's the reference design |
| for SAA7146 bases boards, so if you have some unsupported |
| saa7146 based, analog video card, chances are good that it |
| will work with this skeleton driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called dpc7146. |
| |
| config VIDEO_HEXIUM_ORION |
| tristate "Hexium HV-PCI6 and Orion frame grabber" |
| depends on VIDEO_DEV && PCI |
| select VIDEO_SAA7146_VV |
| ---help--- |
| This is a video4linux driver for the Hexium HV-PCI6 and |
| Orion frame grabber cards by Hexium. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hexium_orion. |
| |
| config VIDEO_HEXIUM_GEMINI |
| tristate "Hexium Gemini frame grabber" |
| depends on VIDEO_DEV && PCI |
| select VIDEO_SAA7146_VV |
| ---help--- |
| This is a video4linux driver for the Hexium Gemini frame |
| grabber card by Hexium. Please note that the Gemini Dual |
| card is *not* fully supported. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called hexium_gemini. |
| |
| source "drivers/media/video/cx88/Kconfig" |
| |
| config VIDEO_OVCAMCHIP |
| tristate "OmniVision Camera Chip support" |
| depends on VIDEO_DEV && I2C |
| ---help--- |
| Support for the OmniVision OV6xxx and OV7xxx series of camera chips. |
| This driver is intended to be used with the ov511 and w9968cf USB |
| camera drivers. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ovcamchip |
| |
| config VIDEO_M32R_AR |
| tristate "AR devices" |
| depends on M32R |
| ---help--- |
| This is a video4linux driver for the Renesas AR (Artificial Retina) |
| camera module. |
| |
| config VIDEO_M32R_AR_M64278 |
| tristate "Use Colour AR module M64278(VGA)" |
| depends on VIDEO_M32R_AR && PLAT_M32700UT |
| ---help--- |
| Say Y here to use the Renesas M64278E-800 camera module, |
| which supports VGA(640x480 pixcels) size of images. |
| |
| config VIDEO_MSP3400 |
| tristate "Micronas MSP34xx audio decoders" |
| depends on VIDEO_DEV && I2C |
| ---help--- |
| Support for the Micronas MSP34xx series of audio decoders. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called msp3400 |
| |
| config VIDEO_CS53L32A |
| tristate "Cirrus Logic CS53L32A audio ADC" |
| depends on VIDEO_DEV && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the Cirrus Logic CS53L32A low voltage |
| stereo A/D converter. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called cs53l32a |
| |
| config VIDEO_WM8775 |
| tristate "Wolfson Microelectronics WM8775 audio ADC" |
| depends on VIDEO_DEV && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the Wolfson Microelectronics WM8775 |
| high performance stereo A/D Converter. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called wm8775 |
| |
| source "drivers/media/video/cx25840/Kconfig" |
| |
| config VIDEO_SAA711X |
| tristate "Philips SAA7113/4/5 video decoders" |
| depends on VIDEO_DEV && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the Philips SAA7113/4/5 video decoders. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa7115 |
| |
| config VIDEO_SAA7127 |
| tristate "Philips SAA7127/9 digital video encoders" |
| depends on VIDEO_DEV && I2C && EXPERIMENTAL |
| ---help--- |
| Support for the Philips SAA7127/9 digital video encoders. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called saa7127 |
| |
| # |
| # USB Multimedia device configuration |
| # |
| |
| menu "V4L USB devices" |
| depends on USB && VIDEO_DEV |
| |
| source "drivers/media/video/em28xx/Kconfig" |
| |
| config USB_VICAM |
| tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)" |
| depends on USB && VIDEO_DEV && EXPERIMENTAL |
| ---help--- |
| Say Y here if you have 3com homeconnect camera (vicam). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called vicam. |
| |
| config USB_DSBR |
| tristate "D-Link USB FM radio support (EXPERIMENTAL)" |
| depends on USB && VIDEO_DEV && EXPERIMENTAL |
| ---help--- |
| Say Y here if you want to connect this type of radio to your |
| computer's USB port. Note that the audio is not digital, and |
| you must connect the line out connector to a sound card or a |
| set of speakers. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called dsbr100. |
| |
| source "drivers/media/video/et61x251/Kconfig" |
| |
| config USB_IBMCAM |
| tristate "USB IBM (Xirlink) C-it Camera support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want to connect a IBM "C-It" camera, also known as |
| "Xirlink PC Camera" to your computer's USB port. For more |
| information, read <file:Documentation/usb/ibmcam.txt>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ibmcam. |
| |
| This camera has several configuration options which |
| can be specified when you load the module. Read |
| <file:Documentation/usb/ibmcam.txt> to learn more. |
| |
| config USB_KONICAWC |
| tristate "USB Konica Webcam support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want support for webcams based on a Konica |
| chipset. This is known to work with the Intel YC76 webcam. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called konicawc. |
| |
| config USB_OV511 |
| tristate "USB OV511 Camera support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want to connect this type of camera to your |
| computer's USB port. See <file:Documentation/usb/ov511.txt> for more |
| information and for a list of supported cameras. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ov511. |
| |
| config USB_SE401 |
| tristate "USB SE401 Camera support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want to connect this type of camera to your |
| computer's USB port. See <file:Documentation/usb/se401.txt> for more |
| information and for a list of supported cameras. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called se401. |
| |
| config USB_SN9C102 |
| tristate "USB SN9C10x PC Camera Controller support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want support for cameras based on SONiX SN9C101, |
| SN9C102 or SN9C103 PC Camera Controllers. |
| |
| See <file:Documentation/usb/sn9c102.txt> for more informations. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sn9c102. |
| |
| config USB_STV680 |
| tristate "USB STV680 (Pencam) Camera support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want to connect this type of camera to your |
| computer's USB port. This includes the Pencam line of cameras. |
| See <file:Documentation/usb/stv680.txt> for more information and for |
| a list of supported cameras. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called stv680. |
| |
| config USB_W9968CF |
| tristate "USB W996[87]CF JPEG Dual Mode Camera support" |
| depends on USB && VIDEO_DEV && I2C |
| select VIDEO_OVCAMCHIP |
| ---help--- |
| Say Y here if you want support for cameras based on OV681 or |
| Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. |
| |
| This driver has an optional plugin, which is distributed as a |
| separate module only (released under GPL). It allows to use higher |
| resolutions and framerates, but cannot be included in the official |
| Linux kernel for performance purposes. |
| |
| See <file:Documentation/usb/w9968cf.txt> for more informations. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called w9968cf. |
| |
| config USB_ZC0301 |
| tristate "USB ZC0301 Image Processor and Control Chip support" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y here if you want support for cameras based on the ZC0301 |
| Image Processor and Control Chip. |
| |
| See <file:Documentation/usb/zc0301.txt> for more informations. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called zc0301. |
| |
| config USB_PWC |
| tristate "USB Philips Cameras" |
| depends on USB && VIDEO_DEV |
| ---help--- |
| Say Y or M here if you want to use one of these Philips & OEM |
| webcams: |
| * Philips PCA645, PCA646 |
| * Philips PCVC675, PCVC680, PCVC690 |
| * Philips PCVC720/40, PCVC730, PCVC740, PCVC750 |
| * Askey VC010 |
| * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro' |
| and 'Orbit'/'Sphere' |
| * Samsung MPC-C10, MPC-C30 |
| * Creative Webcam 5, Pro Ex |
| * SOTEC Afina Eye |
| * Visionite VCS-UC300, VCS-UM100 |
| |
| The PCA635, PCVC665 and PCVC720/20 are not supported by this driver |
| and never will be, but the 665 and 720/20 are supported by other |
| drivers. |
| |
| See <file:Documentation/usb/philips.txt> for more information and |
| installation instructions. |
| |
| The built-in microphone is enabled by selecting USB Audio support. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pwc. |
| |
| endmenu # V4L USB devices |
| |
| endmenu |