Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
diff --git a/tools/perf/Documentation/perf-annotate.txt b/tools/perf/Documentation/perf-annotate.txt
index b2c6330..6f5a498 100644
--- a/tools/perf/Documentation/perf-annotate.txt
+++ b/tools/perf/Documentation/perf-annotate.txt
@@ -24,12 +24,47 @@
--input=::
Input file name. (default: perf.data)
+-d::
+--dsos=<dso[,dso...]>::
+ Only consider symbols in these dsos.
+-s::
+--symbol=<symbol>::
+ Symbol to annotate.
+
+-f::
+--force::
+ Don't complain, do it.
+
+-v::
+--verbose::
+ Be more verbose. (Show symbol address, etc)
+
+-D::
+--dump-raw-trace::
+ Dump raw trace in ASCII.
+
+-k::
+--vmlinux=<file>::
+ vmlinux pathname.
+
+-m::
+--modules::
+ Load module symbols. WARNING: use only with -k and LIVE kernel.
+
+-l::
+--print-line::
+ Print matching source lines (may be slow).
+
+-P::
+--full-paths::
+ Don't shorten the displayed pathnames.
+
--stdio:: Use the stdio interface.
--tui:: Use the TUI interface Use of --tui requires a tty, if one is not
present, as when piping to other commands, the stdio interface is
used. This interfaces starts by centering on the line with more
- samples, TAB/UNTAB cycles thru the lines with more samples.
+ samples, TAB/UNTAB cycles through the lines with more samples.
SEE ALSO
--------
diff --git a/tools/perf/Documentation/perf-buildid-list.txt b/tools/perf/Documentation/perf-buildid-list.txt
index 01b642c..5eaac6f 100644
--- a/tools/perf/Documentation/perf-buildid-list.txt
+++ b/tools/perf/Documentation/perf-buildid-list.txt
@@ -18,6 +18,9 @@
OPTIONS
-------
+-H::
+--with-hits::
+ Show only DSOs with hits.
-i::
--input=::
Input file name. (default: perf.data)
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index 20d97d8..6a9ec2b 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -19,6 +19,18 @@
OPTIONS
-------
+-M::
+--displacement::
+ Show position displacement relative to baseline.
+
+-D::
+--dump-raw-trace::
+ Dump raw trace in ASCII.
+
+-m::
+--modules::
+ Load module symbols. WARNING: use only with -k and LIVE kernel
+
-d::
--dsos=::
Only consider symbols in these dsos. CSV that understands
@@ -42,7 +54,7 @@
--field-separator=::
Use a special separator character and don't pad with spaces, replacing
- all occurances of this separator in symbol names (and other output)
+ all occurrences of this separator in symbol names (and other output)
with a '.' character, that thus it's the only non valid separator.
-v::
@@ -50,6 +62,11 @@
Be verbose, for instance, show the raw counts in addition to the
diff.
+-f::
+--force::
+ Don't complain, do it.
+
+
SEE ALSO
--------
linkperf:perf-record[1]
diff --git a/tools/perf/Documentation/perf-kvm.txt b/tools/perf/Documentation/perf-kvm.txt
index d004e19..dd84cb2 100644
--- a/tools/perf/Documentation/perf-kvm.txt
+++ b/tools/perf/Documentation/perf-kvm.txt
@@ -22,7 +22,7 @@
a performance counter profile of guest os in realtime
of an arbitrary workload.
- 'perf kvm record <command>' to record the performance couinter profile
+ 'perf kvm record <command>' to record the performance counter profile
of an arbitrary workload and save it into a perf data file. If both
--host and --guest are input, the perf data file name is perf.data.kvm.
If there is no --host but --guest, the file name is perf.data.guest.
@@ -40,6 +40,12 @@
OPTIONS
-------
+-i::
+--input=::
+ Input file name.
+-o::
+--output::
+ Output file name.
--host=::
Collect host side performance profile.
--guest=::
diff --git a/tools/perf/Documentation/perf-lock.txt b/tools/perf/Documentation/perf-lock.txt
index b317102..921de25 100644
--- a/tools/perf/Documentation/perf-lock.txt
+++ b/tools/perf/Documentation/perf-lock.txt
@@ -24,6 +24,21 @@
'perf lock report' reports statistical data.
+OPTIONS
+-------
+
+-i::
+--input=<file>::
+ Input file name.
+
+-v::
+--verbose::
+ Be more verbose (show symbol address, etc).
+
+-D::
+--dump-raw-trace::
+ Dump raw trace in ASCII.
+
SEE ALSO
--------
linkperf:perf[1]
diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt
index 62de1b7..4e23232 100644
--- a/tools/perf/Documentation/perf-probe.txt
+++ b/tools/perf/Documentation/perf-probe.txt
@@ -115,7 +115,7 @@
LINE SYNTAX
-----------
-Line range is descripted by following syntax.
+Line range is described by following syntax.
"FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]"
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index a91f9f9..0ad1bc7 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -39,15 +39,24 @@
be passed as follows: '\mem:addr[:[r][w][x]]'.
If you want to profile read-write accesses in 0x1000, just set
'mem:0x1000:rw'.
+
+--filter=<filter>::
+ Event filter.
+
-a::
- System-wide collection.
+--all-cpus::
+ System-wide collection from all CPUs.
-l::
Scale counter values.
-p::
--pid=::
- Record events on existing pid.
+ Record events on existing process ID.
+
+-t::
+--tid=::
+ Record events on existing thread ID.
-r::
--realtime=::
@@ -109,8 +118,8 @@
-C::
--cpu::
-Collect samples only on the list of cpus provided. Multiple CPUs can be provided as a
-comma-sperated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+Collect samples only on the list of CPUs provided. Multiple CPUs can be provided as a
+comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
In per-thread mode with inheritance mode on (default), samples are captured only when
the thread executes on the designated CPUs. Default is to monitor all CPUs.
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 12052c9..59a1f57 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -20,6 +20,11 @@
-i::
--input=::
Input file name. (default: perf.data)
+
+-v::
+--verbose::
+ Be more verbose. (show symbol address, etc)
+
-d::
--dsos=::
Only consider symbols in these dsos. CSV that understands
@@ -27,6 +32,10 @@
-n::
--show-nr-samples::
Show the number of samples for each symbol
+
+--showcpuutilization::
+ Show sample percentage for different cpu modes.
+
-T::
--threads::
Show per-thread event counters
@@ -39,12 +48,24 @@
Only consider these symbols. CSV that understands
file://filename entries.
+-U::
+--hide-unresolved::
+ Only display entries resolved to a symbol.
+
-s::
--sort=::
Sort by key(s): pid, comm, dso, symbol, parent.
+-p::
+--parent=<regex>::
+ regex filter to identify parent, see: '--sort parent'
+
+-x::
+--exclude-other::
+ Only display entries with parent-match.
+
-w::
---field-width=::
+--column-widths=<width[,width...]>::
Force each column width to the provided list, for large terminal
readability.
@@ -52,19 +73,26 @@
--field-separator=::
Use a special separator character and don't pad with spaces, replacing
- all occurances of this separator in symbol names (and other output)
+ all occurrences of this separator in symbol names (and other output)
with a '.' character, that thus it's the only non valid separator.
+-D::
+--dump-raw-trace::
+ Dump raw trace in ASCII.
+
-g [type,min]::
--call-graph::
- Display callchains using type and min percent threshold.
+ Display call chains using type and min percent threshold.
type can be either:
- - flat: single column, linear exposure of callchains.
+ - flat: single column, linear exposure of call chains.
- graph: use a graph tree, displaying absolute overhead rates.
- fractal: like graph, but displays relative rates. Each branch of
the tree is considered as a new profiled object. +
Default: fractal,0.5.
+--pretty=<key>::
+ Pretty printing style. key: normal, raw
+
--stdio:: Use the stdio interface.
--tui:: Use the TUI interface, that is integrated with annotate and allows
@@ -72,6 +100,19 @@
requires a tty, if one is not present, as when piping to other
commands, the stdio interface is used.
+-k::
+--vmlinux=<file>::
+ vmlinux pathname
+
+-m::
+--modules::
+ Load module symbols. WARNING: This should only be used with -k and
+ a LIVE kernel.
+
+-f::
+--force::
+ Don't complain, do it.
+
SEE ALSO
--------
linkperf:perf-stat[1]
diff --git a/tools/perf/Documentation/perf-sched.txt b/tools/perf/Documentation/perf-sched.txt
index 8417644..46822d5 100644
--- a/tools/perf/Documentation/perf-sched.txt
+++ b/tools/perf/Documentation/perf-sched.txt
@@ -8,11 +8,11 @@
SYNOPSIS
--------
[verse]
-'perf sched' {record|latency|replay|trace}
+'perf sched' {record|latency|map|replay|trace}
DESCRIPTION
-----------
-There are four variants of perf sched:
+There are five variants of perf sched:
'perf sched record <command>' to record the scheduling events
of an arbitrary workload.
@@ -30,8 +30,22 @@
of the workload as it occurred when it was recorded - and can repeat
it a number of times, measuring its performance.)
+ 'perf sched map' to print a textual context-switching outline of
+ workload captured via perf sched record. Columns stand for
+ individual CPUs, and the two-letter shortcuts stand for tasks that
+ are running on a CPU. A '*' denotes the CPU that had the event, and
+ a dot signals an idle CPU.
+
OPTIONS
-------
+-i::
+--input=<file>::
+ Input file name. (default: perf.data)
+
+-v::
+--verbose::
+ Be more verbose. (show symbol address, etc)
+
-D::
--dump-raw-trace=::
Display verbose dump of the sched data.
diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt
index f442acc..29ad942 100644
--- a/tools/perf/Documentation/perf-script.txt
+++ b/tools/perf/Documentation/perf-script.txt
@@ -104,6 +104,13 @@
normally don't - this option allows the latter to be run in
system-wide mode.
+-i::
+--input=::
+ Input file name.
+
+-d::
+--debug-mode::
+ Do various checks like samples ordering and lost events.
SEE ALSO
--------
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index c405bca..b6da7af 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -8,8 +8,8 @@
SYNOPSIS
--------
[verse]
-'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] <command>
-'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] -- <command> [<options>]
+'perf stat' [-e <EVENT> | --event=EVENT] [-a] <command>
+'perf stat' [-e <EVENT> | --event=EVENT] [-a] -- <command> [<options>]
DESCRIPTION
-----------
@@ -35,21 +35,33 @@
child tasks do not inherit counters
-p::
--pid=<pid>::
- stat events on existing pid
+ stat events on existing process id
+
+-t::
+--tid=<tid>::
+ stat events on existing thread id
+
-a::
- system-wide collection
+--all-cpus::
+ system-wide collection from all CPUs
-c::
- scale counter values
+--scale::
+ scale/normalize counter values
+
+-r::
+--repeat=<n>::
+ repeat command and print average + stddev (max: 100)
-B::
+--big-num::
print large numbers with thousands' separators according to locale
-C::
--cpu=::
-Count only on the list of cpus provided. Multiple CPUs can be provided as a
-comma-sperated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+Count only on the list of CPUs provided. Multiple CPUs can be provided as a
+comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
In per-thread mode, this option is ignored. The -a option is still necessary
to activate system-wide monitoring. Default is to count on all CPUs.
@@ -58,6 +70,19 @@
Do not aggregate counts across all monitored CPUs in system-wide mode (-a).
This option is only valid in system-wide mode.
+-n::
+--null::
+ null run - don't start any counters
+
+-v::
+--verbose::
+ be more verbose (show counter open errors, etc)
+
+-x SEP::
+--field-separator SEP::
+print counts using a CSV-style output to make it easy to import directly into
+spreadsheets. Columns are separated by the string specified in SEP.
+
EXAMPLES
--------
diff --git a/tools/perf/Documentation/perf-test.txt b/tools/perf/Documentation/perf-test.txt
index 1c4b5f5..2c3b462 100644
--- a/tools/perf/Documentation/perf-test.txt
+++ b/tools/perf/Documentation/perf-test.txt
@@ -12,7 +12,7 @@
DESCRIPTION
-----------
-This command does assorted sanity tests, initially thru linked routines but
+This command does assorted sanity tests, initially through linked routines but
also will look for a directory with more tests in the form of scripts.
OPTIONS
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 1f96876..f6eb1cd 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -12,7 +12,7 @@
DESCRIPTION
-----------
-This command generates and displays a performance counter profile in realtime.
+This command generates and displays a performance counter profile in real time.
OPTIONS
@@ -27,8 +27,8 @@
-C <cpu-list>::
--cpu=<cpu>::
-Monitor only on the list of cpus provided. Multiple CPUs can be provided as a
-comma-sperated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+Monitor only on the list of CPUs provided. Multiple CPUs can be provided as a
+comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
Default is to monitor all CPUS.
-d <seconds>::
@@ -50,6 +50,10 @@
--count-filter=<count>::
Only display functions with more events than this.
+-g::
+--group::
+ Put the counters into a counter group.
+
-F <freq>::
--freq=<freq>::
Profile at this frequency.
@@ -68,7 +72,11 @@
-p <pid>::
--pid=<pid>::
- Profile events on existing pid.
+ Profile events on existing Process ID.
+
+-t <tid>::
+--tid=<tid>::
+ Profile events on existing thread ID.
-r <priority>::
--realtime=<priority>::
@@ -78,6 +86,18 @@
--sym-annotate=<symbol>::
Annotate this symbol.
+-K::
+--hide_kernel_symbols::
+ Hide kernel symbols.
+
+-U::
+--hide_user_symbols::
+ Hide user symbols.
+
+-D::
+--dump-symtab::
+ Dump the symbol table used for profiling.
+
-v::
--verbose::
Be more verbose (show counter open errors, etc).
diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c
index fca1d44..221b823 100644
--- a/tools/perf/builtin-diff.c
+++ b/tools/perf/builtin-diff.c
@@ -173,7 +173,7 @@
static const struct option options[] = {
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show symbol address, etc)"),
- OPT_BOOLEAN('m', "displacement", &show_displacement,
+ OPT_BOOLEAN('M', "displacement", &show_displacement,
"Show position displacement relative to baseline"),
OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
"dump raw trace in ASCII"),
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 970a7f2..7ff746d 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -52,6 +52,8 @@
#include <math.h>
#include <locale.h>
+#define DEFAULT_SEPARATOR " "
+
static struct perf_event_attr default_attrs[] = {
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK },
@@ -82,8 +84,11 @@
static int thread_num = 0;
static pid_t child_pid = -1;
static bool null_run = false;
-static bool big_num = false;
+static bool big_num = true;
+static int big_num_opt = -1;
static const char *cpu_list;
+static const char *csv_sep = NULL;
+static bool csv_output = false;
static int *fd[MAX_NR_CPUS][MAX_COUNTERS];
@@ -449,12 +454,18 @@
static void nsec_printout(int cpu, int counter, double avg)
{
double msecs = avg / 1e6;
+ char cpustr[16] = { '\0', };
+ const char *fmt = csv_output ? "%s%.6f%s%s" : "%s%18.6f%s%-24s";
if (no_aggr)
- fprintf(stderr, "CPU%-4d %18.6f %-24s",
- cpumap[cpu], msecs, event_name(counter));
- else
- fprintf(stderr, " %18.6f %-24s", msecs, event_name(counter));
+ sprintf(cpustr, "CPU%*d%s",
+ csv_output ? 0 : -4,
+ cpumap[cpu], csv_sep);
+
+ fprintf(stderr, fmt, cpustr, msecs, csv_sep, event_name(counter));
+
+ if (csv_output)
+ return;
if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) {
fprintf(stderr, " # %10.3f CPUs ",
@@ -466,18 +477,26 @@
{
double total, ratio = 0.0;
char cpustr[16] = { '\0', };
+ const char *fmt;
+
+ if (csv_output)
+ fmt = "%s%.0f%s%s";
+ else if (big_num)
+ fmt = "%s%'18.0f%s%-24s";
+ else
+ fmt = "%s%18.0f%s%-24s";
if (no_aggr)
- sprintf(cpustr, "CPU%-4d", cpumap[cpu]);
+ sprintf(cpustr, "CPU%*d%s",
+ csv_output ? 0 : -4,
+ cpumap[cpu], csv_sep);
else
cpu = 0;
- if (big_num)
- fprintf(stderr, "%s %'18.0f %-24s",
- cpustr, avg, event_name(counter));
- else
- fprintf(stderr, "%s %18.0f %-24s",
- cpustr, avg, event_name(counter));
+ fprintf(stderr, fmt, cpustr, avg, csv_sep, event_name(counter));
+
+ if (csv_output)
+ return;
if (MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
total = avg_stats(&runtime_cycles_stats[cpu]);
@@ -515,8 +534,9 @@
int scaled = event_scaled[counter];
if (scaled == -1) {
- fprintf(stderr, " %18s %-24s\n",
- "<not counted>", event_name(counter));
+ fprintf(stderr, "%*s%s%-24s\n",
+ csv_output ? 0 : 18,
+ "<not counted>", csv_sep, event_name(counter));
return;
}
@@ -525,6 +545,11 @@
else
abs_printout(-1, counter, avg);
+ if (csv_output) {
+ fputc('\n', stderr);
+ return;
+ }
+
print_noise(counter, avg);
if (scaled) {
@@ -554,8 +579,12 @@
ena = cpu_counts[cpu][counter].ena;
run = cpu_counts[cpu][counter].run;
if (run == 0 || ena == 0) {
- fprintf(stderr, "CPU%-4d %18s %-24s", cpumap[cpu],
- "<not counted>", event_name(counter));
+ fprintf(stderr, "CPU%*d%s%*s%s%-24s",
+ csv_output ? 0 : -4,
+ cpumap[cpu], csv_sep,
+ csv_output ? 0 : 18,
+ "<not counted>", csv_sep,
+ event_name(counter));
fprintf(stderr, "\n");
continue;
@@ -566,11 +595,13 @@
else
abs_printout(cpu, counter, val);
- print_noise(counter, 1.0);
+ if (!csv_output) {
+ print_noise(counter, 1.0);
- if (run != ena) {
- fprintf(stderr, " (scaled from %.2f%%)",
+ if (run != ena) {
+ fprintf(stderr, " (scaled from %.2f%%)",
100.0 * run / ena);
+ }
}
fprintf(stderr, "\n");
}
@@ -582,21 +613,23 @@
fflush(stdout);
- fprintf(stderr, "\n");
- fprintf(stderr, " Performance counter stats for ");
- if(target_pid == -1 && target_tid == -1) {
- fprintf(stderr, "\'%s", argv[0]);
- for (i = 1; i < argc; i++)
- fprintf(stderr, " %s", argv[i]);
- } else if (target_pid != -1)
- fprintf(stderr, "process id \'%d", target_pid);
- else
- fprintf(stderr, "thread id \'%d", target_tid);
+ if (!csv_output) {
+ fprintf(stderr, "\n");
+ fprintf(stderr, " Performance counter stats for ");
+ if(target_pid == -1 && target_tid == -1) {
+ fprintf(stderr, "\'%s", argv[0]);
+ for (i = 1; i < argc; i++)
+ fprintf(stderr, " %s", argv[i]);
+ } else if (target_pid != -1)
+ fprintf(stderr, "process id \'%d", target_pid);
+ else
+ fprintf(stderr, "thread id \'%d", target_tid);
- fprintf(stderr, "\'");
- if (run_count > 1)
- fprintf(stderr, " (%d runs)", run_count);
- fprintf(stderr, ":\n\n");
+ fprintf(stderr, "\'");
+ if (run_count > 1)
+ fprintf(stderr, " (%d runs)", run_count);
+ fprintf(stderr, ":\n\n");
+ }
if (no_aggr) {
for (counter = 0; counter < nr_counters; counter++)
@@ -606,15 +639,17 @@
print_counter_aggr(counter);
}
- fprintf(stderr, "\n");
- fprintf(stderr, " %18.9f seconds time elapsed",
- avg_stats(&walltime_nsecs_stats)/1e9);
- if (run_count > 1) {
- fprintf(stderr, " ( +- %7.3f%% )",
+ if (!csv_output) {
+ fprintf(stderr, "\n");
+ fprintf(stderr, " %18.9f seconds time elapsed",
+ avg_stats(&walltime_nsecs_stats)/1e9);
+ if (run_count > 1) {
+ fprintf(stderr, " ( +- %7.3f%% )",
100*stddev_stats(&walltime_nsecs_stats) /
avg_stats(&walltime_nsecs_stats));
+ }
+ fprintf(stderr, "\n\n");
}
- fprintf(stderr, "\n\n");
}
static volatile int signr = -1;
@@ -644,6 +679,13 @@
NULL
};
+static int stat__set_big_num(const struct option *opt __used,
+ const char *s __used, int unset)
+{
+ big_num_opt = unset ? 0 : 1;
+ return 0;
+}
+
static const struct option options[] = {
OPT_CALLBACK('e', "event", NULL, "event",
"event selector. use 'perf list' to list available events",
@@ -664,12 +706,15 @@
"repeat command and print average + stddev (max: 100)"),
OPT_BOOLEAN('n', "null", &null_run,
"null run - dont start any counters"),
- OPT_BOOLEAN('B', "big-num", &big_num,
- "print large numbers with thousands\' separators"),
+ OPT_CALLBACK_NOOPT('B', "big-num", NULL, NULL,
+ "print large numbers with thousands\' separators",
+ stat__set_big_num),
OPT_STRING('C', "cpu", &cpu_list, "cpu",
"list of cpus to monitor in system-wide"),
OPT_BOOLEAN('A', "no-aggr", &no_aggr,
"disable CPU count aggregation"),
+ OPT_STRING('x', "field-separator", &csv_sep, "separator",
+ "print counts with custom separator"),
OPT_END()
};
@@ -682,6 +727,25 @@
argc = parse_options(argc, argv, options, stat_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
+
+ if (csv_sep)
+ csv_output = true;
+ else
+ csv_sep = DEFAULT_SEPARATOR;
+
+ /*
+ * let the spreadsheet do the pretty-printing
+ */
+ if (csv_output) {
+ /* User explicitely passed -B? */
+ if (big_num_opt == 1) {
+ fprintf(stderr, "-B option not supported with -x\n");
+ usage_with_options(stat_usage, options);
+ } else /* Nope, so disable big number formatting */
+ big_num = false;
+ } else if (big_num_opt == 0) /* User passed --no-big-num */
+ big_num = false;
+
if (!argc && target_pid == -1 && target_tid == -1)
usage_with_options(stat_usage, options);
if (run_count <= 0)