| /* |
| * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/miscdevice.h> |
| #include <linux/uaccess.h> |
| #include <linux/sched.h> |
| #include <linux/wait.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/slab.h> |
| #include <linux/msm_audio_aac.h> |
| #include <asm/atomic.h> |
| #include <asm/ioctls.h> |
| #include "audio_utils.h" |
| |
| |
| /* Buffer with meta*/ |
| #define PCM_BUF_SIZE (4096 + sizeof(struct meta_in)) |
| |
| /* Maximum 5 frames in buffer with meta */ |
| #define FRAME_SIZE (1 + ((1536+sizeof(struct meta_out_dsp)) * 5)) |
| |
| #define AAC_FORMAT_ADTS 65535 |
| |
| /* ------------------- device --------------------- */ |
| static long aac_in_ioctl(struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct q6audio_in *audio = file->private_data; |
| int rc = 0; |
| int cnt = 0; |
| |
| switch (cmd) { |
| case AUDIO_START: { |
| struct msm_audio_aac_enc_config *enc_cfg; |
| struct msm_audio_aac_config *aac_config; |
| uint32_t aac_mode = AAC_ENC_MODE_AAC_LC; |
| |
| enc_cfg = audio->enc_cfg; |
| aac_config = audio->codec_cfg; |
| /* ENCODE CFG (after new set of API's are published )bharath*/ |
| pr_debug("%s:session id %d: default buf alloc[%d]\n", __func__, |
| audio->ac->session, audio->buf_alloc); |
| if (audio->enabled == 1) { |
| pr_info("%s:AUDIO_START already over\n", __func__); |
| rc = 0; |
| break; |
| } |
| |
| rc = audio_in_buf_alloc(audio); |
| if (rc < 0) { |
| pr_err("%s:session id %d: buffer allocation failed\n", |
| __func__, audio->ac->session); |
| break; |
| } |
| |
| pr_debug("%s:sbr_ps_flag = %d, sbr_flag = %d\n", __func__, |
| aac_config->sbr_ps_on_flag, aac_config->sbr_on_flag); |
| if (aac_config->sbr_ps_on_flag) |
| aac_mode = AAC_ENC_MODE_EAAC_P; |
| else if (aac_config->sbr_on_flag) |
| aac_mode = AAC_ENC_MODE_AAC_P; |
| else |
| aac_mode = AAC_ENC_MODE_AAC_LC; |
| |
| rc = q6asm_enc_cfg_blk_aac(audio->ac, |
| audio->buf_cfg.frames_per_buf, |
| enc_cfg->sample_rate, |
| enc_cfg->channels, |
| enc_cfg->bit_rate, |
| aac_mode, |
| enc_cfg->stream_format); |
| if (rc < 0) { |
| pr_err("%s:session id %d: cmd media format block" |
| "failed\n", __func__, audio->ac->session); |
| break; |
| } |
| if (audio->feedback == NON_TUNNEL_MODE) { |
| rc = q6asm_media_format_block_pcm(audio->ac, |
| audio->pcm_cfg.sample_rate, |
| audio->pcm_cfg.channel_count); |
| if (rc < 0) { |
| pr_err("%s:session id %d: media format block" |
| "failed\n", __func__, audio->ac->session); |
| break; |
| } |
| } |
| rc = audio_in_enable(audio); |
| if (!rc) { |
| audio->enabled = 1; |
| } else { |
| audio->enabled = 0; |
| pr_err("%s:session id %d: Audio Start procedure" |
| "failed rc=%d\n", __func__, audio->ac->session, rc); |
| break; |
| } |
| while (cnt++ < audio->str_cfg.buffer_count) |
| q6asm_read(audio->ac); |
| pr_debug("%s:session id %d: AUDIO_START success enable[%d]\n", |
| __func__, audio->ac->session, audio->enabled); |
| break; |
| } |
| case AUDIO_STOP: { |
| pr_debug("%s:session id %d: Rxed AUDIO_STOP\n", __func__, |
| audio->ac->session); |
| rc = audio_in_disable(audio); |
| if (rc < 0) { |
| pr_err("%s:session id %d: Audio Stop procedure failed" |
| "rc=%d\n", __func__, audio->ac->session, rc); |
| break; |
| } |
| break; |
| } |
| case AUDIO_GET_AAC_ENC_CONFIG: { |
| struct msm_audio_aac_enc_config cfg; |
| struct msm_audio_aac_enc_config *enc_cfg; |
| enc_cfg = audio->enc_cfg; |
| if (enc_cfg->channels == CH_MODE_MONO) |
| cfg.channels = 1; |
| else |
| cfg.channels = 2; |
| cfg.sample_rate = enc_cfg->sample_rate; |
| cfg.bit_rate = enc_cfg->bit_rate; |
| /* ADTS(-1) to ADTS(0x00), RAW(0x00) to RAW(0x03) */ |
| cfg.stream_format = ((enc_cfg->stream_format == \ |
| 0x00) ? AUDIO_AAC_FORMAT_ADTS : AUDIO_AAC_FORMAT_RAW); |
| pr_debug("%s:session id %d: Get-aac-cfg: format=%d sr=%d" |
| "bitrate=%d\n", __func__, audio->ac->session, |
| cfg.stream_format, cfg.sample_rate, cfg.bit_rate); |
| if (copy_to_user((void *)arg, &cfg, sizeof(cfg))) |
| rc = -EFAULT; |
| break; |
| } |
| case AUDIO_SET_AAC_ENC_CONFIG: { |
| struct msm_audio_aac_enc_config cfg; |
| struct msm_audio_aac_enc_config *enc_cfg; |
| enc_cfg = audio->enc_cfg; |
| if (copy_from_user(&cfg, (void *)arg, sizeof(cfg))) { |
| rc = -EFAULT; |
| break; |
| } |
| pr_debug("%s:session id %d: Set-aac-cfg: stream=%d\n", __func__, |
| audio->ac->session, cfg.stream_format); |
| |
| if ((cfg.stream_format != AUDIO_AAC_FORMAT_RAW) && |
| (cfg.stream_format != AAC_FORMAT_ADTS)) { |
| pr_err("%s:session id %d: unsupported AAC format\n", |
| __func__, audio->ac->session); |
| rc = -EINVAL; |
| break; |
| } |
| |
| if (cfg.channels == 1) { |
| cfg.channels = CH_MODE_MONO; |
| } else if (cfg.channels == 2) { |
| cfg.channels = CH_MODE_STEREO; |
| } else { |
| rc = -EINVAL; |
| break; |
| } |
| if ((cfg.sample_rate < 8000) && (cfg.sample_rate > 48000)) { |
| pr_err("%s: ERROR in setting samplerate = %d\n", |
| __func__, cfg.sample_rate); |
| rc = -EINVAL; |
| break; |
| } |
| /* For aac-lc, min_bit_rate = min(24Kbps, 0.5*SR*num_chan); |
| max_bi_rate = min(192Kbps, 6*SR*num_chan); |
| min_sample_rate = 8000Hz, max_rate=48000 */ |
| if ((cfg.bit_rate < 4000) || (cfg.bit_rate > 192000)) { |
| pr_err("%s: ERROR in setting bitrate = %d\n", |
| __func__, cfg.bit_rate); |
| rc = -EINVAL; |
| break; |
| } |
| enc_cfg->sample_rate = cfg.sample_rate; |
| enc_cfg->channels = cfg.channels; |
| enc_cfg->bit_rate = cfg.bit_rate; |
| enc_cfg->stream_format = |
| ((cfg.stream_format == AUDIO_AAC_FORMAT_RAW) ? \ |
| 0x03 : 0x00); |
| pr_debug("%s:session id %d: Set-aac-cfg:SR= 0x%x ch=0x%x" |
| "bitrate=0x%x, format(adts/raw) = %d\n", |
| __func__, audio->ac->session, enc_cfg->sample_rate, |
| enc_cfg->channels, enc_cfg->bit_rate, |
| enc_cfg->stream_format); |
| break; |
| } |
| case AUDIO_GET_AAC_CONFIG: { |
| if (copy_to_user((void *)arg, &audio->codec_cfg, |
| sizeof(struct msm_audio_aac_config))) { |
| rc = -EFAULT; |
| break; |
| } |
| break; |
| } |
| case AUDIO_SET_AAC_CONFIG: { |
| struct msm_audio_aac_config aac_cfg; |
| struct msm_audio_aac_config *audio_aac_cfg; |
| struct msm_audio_aac_enc_config *enc_cfg; |
| enc_cfg = audio->enc_cfg; |
| audio_aac_cfg = audio->codec_cfg; |
| |
| if (copy_from_user(&aac_cfg, (void *)arg, |
| sizeof(struct msm_audio_aac_config))) { |
| rc = -EFAULT; |
| break; |
| } |
| pr_debug("%s:session id %d: AUDIO_SET_AAC_CONFIG: sbr_flag = %d" |
| " sbr_ps_flag = %d\n", __func__, |
| audio->ac->session, aac_cfg.sbr_on_flag, |
| aac_cfg.sbr_ps_on_flag); |
| audio_aac_cfg->sbr_on_flag = aac_cfg.sbr_on_flag; |
| audio_aac_cfg->sbr_ps_on_flag = aac_cfg.sbr_ps_on_flag; |
| if ((audio_aac_cfg->sbr_on_flag == 1) || |
| (audio_aac_cfg->sbr_ps_on_flag == 1)) { |
| if (enc_cfg->sample_rate < 24000) { |
| pr_err("%s: ERROR in setting samplerate = %d" |
| "\n", __func__, enc_cfg->sample_rate); |
| rc = -EINVAL; |
| break; |
| } |
| } |
| break; |
| } |
| default: |
| rc = -EINVAL; |
| } |
| return rc; |
| } |
| |
| static int aac_in_open(struct inode *inode, struct file *file) |
| { |
| struct q6audio_in *audio = NULL; |
| struct msm_audio_aac_enc_config *enc_cfg; |
| struct msm_audio_aac_config *aac_config; |
| int rc = 0; |
| |
| audio = kzalloc(sizeof(struct q6audio_in), GFP_KERNEL); |
| |
| if (audio == NULL) { |
| pr_err("%s: Could not allocate memory for aac" |
| "driver\n", __func__); |
| return -ENOMEM; |
| } |
| /* Allocate memory for encoder config param */ |
| audio->enc_cfg = kzalloc(sizeof(struct msm_audio_aac_enc_config), |
| GFP_KERNEL); |
| if (audio->enc_cfg == NULL) { |
| pr_err("%s:session id %d: Could not allocate memory for aac" |
| "config param\n", __func__, audio->ac->session); |
| kfree(audio); |
| return -ENOMEM; |
| } |
| enc_cfg = audio->enc_cfg; |
| |
| audio->codec_cfg = kzalloc(sizeof(struct msm_audio_aac_config), |
| GFP_KERNEL); |
| if (audio->codec_cfg == NULL) { |
| pr_err("%s:session id %d: Could not allocate memory for aac" |
| "config\n", __func__, audio->ac->session); |
| kfree(audio->enc_cfg); |
| kfree(audio); |
| return -ENOMEM; |
| } |
| aac_config = audio->codec_cfg; |
| |
| mutex_init(&audio->lock); |
| mutex_init(&audio->read_lock); |
| mutex_init(&audio->write_lock); |
| spin_lock_init(&audio->dsp_lock); |
| init_waitqueue_head(&audio->read_wait); |
| init_waitqueue_head(&audio->write_wait); |
| |
| /* Settings will be re-config at AUDIO_SET_CONFIG, |
| * but at least we need to have initial config |
| */ |
| audio->str_cfg.buffer_size = FRAME_SIZE; |
| audio->str_cfg.buffer_count = FRAME_NUM; |
| audio->min_frame_size = 1536; |
| audio->max_frames_per_buf = 5; |
| enc_cfg->sample_rate = 8000; |
| enc_cfg->channels = 1; |
| enc_cfg->bit_rate = 16000; |
| enc_cfg->stream_format = 0x00;/* 0:ADTS, 3:RAW */ |
| audio->buf_cfg.meta_info_enable = 0x01; |
| audio->buf_cfg.frames_per_buf = 0x01; |
| audio->pcm_cfg.buffer_count = PCM_BUF_COUNT; |
| audio->pcm_cfg.buffer_size = PCM_BUF_SIZE; |
| aac_config->format = AUDIO_AAC_FORMAT_ADTS; |
| aac_config->audio_object = AUDIO_AAC_OBJECT_LC; |
| aac_config->sbr_on_flag = 0; |
| aac_config->sbr_ps_on_flag = 0; |
| aac_config->channel_configuration = 1; |
| |
| audio->ac = q6asm_audio_client_alloc((app_cb)q6asm_in_cb, |
| (void *)audio); |
| |
| if (!audio->ac) { |
| pr_err("%s: Could not allocate memory for" |
| "audio client\n", __func__); |
| kfree(audio->enc_cfg); |
| kfree(audio->codec_cfg); |
| kfree(audio); |
| return -ENOMEM; |
| } |
| /* open aac encoder in tunnel mode */ |
| audio->buf_cfg.frames_per_buf = 0x01; |
| |
| if ((file->f_mode & FMODE_WRITE) && |
| (file->f_mode & FMODE_READ)) { |
| audio->feedback = NON_TUNNEL_MODE; |
| rc = q6asm_open_read_write(audio->ac, FORMAT_MPEG4_AAC, |
| FORMAT_LINEAR_PCM); |
| |
| if (rc < 0) { |
| pr_err("%s:session id %d: NT Open failed rc=%d\n", |
| __func__, audio->ac->session, rc); |
| rc = -ENODEV; |
| goto fail; |
| } |
| audio->buf_cfg.meta_info_enable = 0x01; |
| pr_info("%s:session id %d: NT mode encoder success\n", __func__, |
| audio->ac->session); |
| } else if (!(file->f_mode & FMODE_WRITE) && |
| (file->f_mode & FMODE_READ)) { |
| audio->feedback = TUNNEL_MODE; |
| rc = q6asm_open_read(audio->ac, FORMAT_MPEG4_AAC); |
| |
| if (rc < 0) { |
| pr_err("%s:session id %d: Tunnel Open failed rc=%d\n", |
| __func__, audio->ac->session, rc); |
| rc = -ENODEV; |
| goto fail; |
| } |
| /* register for tx overflow (valid for tunnel mode only) */ |
| rc = q6asm_reg_tx_overflow(audio->ac, 0x01); |
| if (rc < 0) { |
| pr_err("%s:session id %d: TX Overflow registration" |
| "failed rc=%d\n", __func__, |
| audio->ac->session, rc); |
| rc = -ENODEV; |
| goto fail; |
| } |
| audio->buf_cfg.meta_info_enable = 0x00; |
| pr_info("%s:session id %d: T mode encoder success\n", __func__, |
| audio->ac->session); |
| } else { |
| pr_err("%s:session id %d: Unexpected mode\n", __func__, |
| audio->ac->session); |
| rc = -EACCES; |
| goto fail; |
| } |
| audio->opened = 1; |
| atomic_set(&audio->in_count, PCM_BUF_COUNT); |
| atomic_set(&audio->out_count, 0x00); |
| audio->enc_ioctl = aac_in_ioctl; |
| file->private_data = audio; |
| |
| pr_info("%s:session id %d: success\n", __func__, audio->ac->session); |
| return 0; |
| fail: |
| q6asm_audio_client_free(audio->ac); |
| kfree(audio->enc_cfg); |
| kfree(audio->codec_cfg); |
| kfree(audio); |
| return rc; |
| } |
| |
| static const struct file_operations audio_in_fops = { |
| .owner = THIS_MODULE, |
| .open = aac_in_open, |
| .release = audio_in_release, |
| .read = audio_in_read, |
| .write = audio_in_write, |
| .unlocked_ioctl = audio_in_ioctl, |
| }; |
| |
| struct miscdevice audio_aac_in_misc = { |
| .minor = MISC_DYNAMIC_MINOR, |
| .name = "msm_aac_in", |
| .fops = &audio_in_fops, |
| }; |
| |
| static int __init aac_in_init(void) |
| { |
| return misc_register(&audio_aac_in_misc); |
| } |
| device_initcall(aac_in_init); |