ALSA: ua101: add Edirol UA-1000 support
Add support for the Edirol UA-1000 to the UA-101 driver.
Both devices behave the same, so we just have to shuffle around some
interface numbers and name strings.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 8c29258..c570ae3 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -22,13 +22,13 @@
will be called snd-usb-audio.
config SND_USB_UA101
- tristate "Edirol UA-101 driver (EXPERIMENTAL)"
+ tristate "Edirol UA-101/UA-1000 driver (EXPERIMENTAL)"
depends on EXPERIMENTAL
select SND_PCM
select SND_RAWMIDI
help
- Say Y here to include support for the Edirol UA-101 audio/MIDI
- interface.
+ Say Y here to include support for the Edirol UA-101 and UA-1000
+ audio/MIDI interfaces.
To compile this driver as a module, choose M here: the module
will be called snd-ua101.
diff --git a/sound/usb/ua101.c b/sound/usb/ua101.c
index 4f4ccdf..047dc1c 100644
--- a/sound/usb/ua101.c
+++ b/sound/usb/ua101.c
@@ -1,5 +1,5 @@
/*
- * Edirol UA-101 driver
+ * Edirol UA-101/UA-1000 driver
* Copyright (c) Clemens Ladisch <clemens@ladisch.de>
*
* This driver is free software: you can redistribute it and/or modify
@@ -25,10 +25,10 @@
#include <sound/pcm_params.h>
#include "usbaudio.h"
-MODULE_DESCRIPTION("Edirol UA-101 driver");
+MODULE_DESCRIPTION("Edirol UA-101/1000 driver");
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
MODULE_LICENSE("GPL v2");
-MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101}}");
+MODULE_SUPPORTED_DEVICE("{{Edirol,UA-101},{Edirol,UA-1000}}");
/* I use my UA-1A for testing because I don't have a UA-101 ... */
#define UA1A_HACK
@@ -1200,13 +1200,30 @@
.type = QUIRK_MIDI_FIXED_ENDPOINT,
.data = &midi_ep
};
+ static const int intf_numbers[2][3] = {
+ { /* UA-101 */
+ [INTF_PLAYBACK] = 0,
+ [INTF_CAPTURE] = 1,
+ [INTF_MIDI] = 2,
+ },
+ { /* UA-1000 */
+ [INTF_CAPTURE] = 1,
+ [INTF_PLAYBACK] = 2,
+ [INTF_MIDI] = 3,
+ },
+ };
struct snd_card *card;
struct ua101 *ua;
unsigned int card_index, i;
+ int is_ua1000;
+ const char *name;
char usb_path[32];
int err;
- if (interface->altsetting->desc.bInterfaceNumber != 0)
+ is_ua1000 = usb_id->idProduct == 0x0044;
+
+ if (interface->altsetting->desc.bInterfaceNumber !=
+ intf_numbers[is_ua1000][0])
return -ENODEV;
mutex_lock(&devices_mutex);
@@ -1250,9 +1267,11 @@
#endif
ua->intf[0] = interface;
for (i = 1; i < ARRAY_SIZE(ua->intf); ++i) {
- ua->intf[i] = usb_ifnum_to_if(ua->dev, i);
+ ua->intf[i] = usb_ifnum_to_if(ua->dev,
+ intf_numbers[is_ua1000][i]);
if (!ua->intf[i]) {
- dev_err(&ua->dev->dev, "interface %u not found\n", i);
+ dev_err(&ua->dev->dev, "interface %u not found\n",
+ intf_numbers[is_ua1000][i]);
err = -ENXIO;
goto probe_error;
}
@@ -1292,11 +1311,12 @@
}
#endif
+ name = usb_id->idProduct == 0x0044 ? "UA-1000" : "UA-101";
strcpy(card->driver, "UA-101");
- strcpy(card->shortname, "UA-101");
+ strcpy(card->shortname, name);
usb_make_path(ua->dev, usb_path, sizeof(usb_path));
snprintf(ua->card->longname, sizeof(ua->card->longname),
- "EDIROL UA-101 (serial %s), %u Hz at %s, %s speed",
+ "EDIROL %s (serial %s), %u Hz at %s, %s speed", name,
ua->dev->serial ? ua->dev->serial : "?", ua->rate, usb_path,
ua->dev->speed == USB_SPEED_HIGH ? "high" : "full");
@@ -1314,11 +1334,11 @@
if (err < 0)
goto probe_error;
- err = snd_pcm_new(card, "UA-101", 0, 1, 1, &ua->pcm);
+ err = snd_pcm_new(card, name, 0, 1, 1, &ua->pcm);
if (err < 0)
goto probe_error;
ua->pcm->private_data = ua;
- strcpy(ua->pcm->name, "UA-101");
+ strcpy(ua->pcm->name, name);
snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_PLAYBACK, &playback_pcm_ops);
snd_pcm_set_ops(ua->pcm, SNDRV_PCM_STREAM_CAPTURE, &capture_pcm_ops);
@@ -1389,8 +1409,9 @@
#ifdef UA1A_HACK
{ USB_DEVICE(0x0582, 0x0018) },
#endif
- { USB_DEVICE(0x0582, 0x007d) },
- { USB_DEVICE(0x0582, 0x008d) },
+ { USB_DEVICE(0x0582, 0x0044) }, /* UA-1000 high speed */
+ { USB_DEVICE(0x0582, 0x007d) }, /* UA-101 high speed */
+ { USB_DEVICE(0x0582, 0x008d) }, /* UA-101 full speed */
{ }
};
MODULE_DEVICE_TABLE(usb, ua101_ids);
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 8a8f625..7ad8089 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -3116,58 +3116,6 @@
return 0;
}
-/*
- * Create a stream for an Edirol UA-1000 interface.
- */
-static int create_ua1000_quirk(struct snd_usb_audio *chip,
- struct usb_interface *iface,
- const struct snd_usb_audio_quirk *quirk)
-{
- static const struct audioformat ua1000_format = {
- .format = SNDRV_PCM_FORMAT_S32_LE,
- .fmt_type = USB_FORMAT_TYPE_I,
- .altsetting = 1,
- .altset_idx = 1,
- .attributes = 0,
- .rates = SNDRV_PCM_RATE_CONTINUOUS,
- };
- struct usb_host_interface *alts;
- struct usb_interface_descriptor *altsd;
- struct audioformat *fp;
- int stream, err;
-
- if (iface->num_altsetting != 2)
- return -ENXIO;
- alts = &iface->altsetting[1];
- altsd = get_iface_desc(alts);
- if (alts->extralen != 11 || alts->extra[1] != USB_DT_CS_INTERFACE ||
- altsd->bNumEndpoints != 1)
- return -ENXIO;
-
- fp = kmemdup(&ua1000_format, sizeof(*fp), GFP_KERNEL);
- if (!fp)
- return -ENOMEM;
-
- fp->channels = alts->extra[4];
- fp->iface = altsd->bInterfaceNumber;
- fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
- fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
- fp->datainterval = parse_datainterval(chip, alts);
- fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
- fp->rate_max = fp->rate_min = combine_triple(&alts->extra[8]);
-
- stream = (fp->endpoint & USB_DIR_IN)
- ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
- err = add_audio_endpoint(chip, stream, fp);
- if (err < 0) {
- kfree(fp);
- return err;
- }
- /* FIXME: playback must be synchronized to capture */
- usb_set_interface(chip->dev, fp->iface, 0);
- return 0;
-}
-
static int snd_usb_create_quirk(struct snd_usb_audio *chip,
struct usb_interface *iface,
const struct snd_usb_audio_quirk *quirk);
@@ -3416,7 +3364,6 @@
[QUIRK_MIDI_CME] = create_any_midi_quirk,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
[QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
- [QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk,
[QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
[QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk
};
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 9d8cea4..96c558a 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -159,7 +159,6 @@
QUIRK_MIDI_US122L,
QUIRK_AUDIO_STANDARD_INTERFACE,
QUIRK_AUDIO_FIXED_ENDPOINT,
- QUIRK_AUDIO_EDIROL_UA1000,
QUIRK_AUDIO_EDIROL_UAXX,
QUIRK_AUDIO_ALIGN_TRANSFER,
@@ -196,7 +195,7 @@
/* for QUIRK_AUDIO/MIDI_STANDARD_INTERFACE, data is NULL */
-/* for QUIRK_AUDIO_EDIROL_UA700_UA25/UA1000, data is NULL */
+/* for QUIRK_AUDIO_EDIROL_UAXX, data is NULL */
/* for QUIRK_IGNORE_INTERFACE, data is NULL */
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index e691eba..977d980 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1016,36 +1016,6 @@
}
},
{
- USB_DEVICE(0x0582, 0x0044),
- .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
- .vendor_name = "Roland",
- .product_name = "UA-1000",
- .ifnum = QUIRK_ANY_INTERFACE,
- .type = QUIRK_COMPOSITE,
- .data = (const struct snd_usb_audio_quirk[]) {
- {
- .ifnum = 1,
- .type = QUIRK_AUDIO_EDIROL_UA1000
- },
- {
- .ifnum = 2,
- .type = QUIRK_AUDIO_EDIROL_UA1000
- },
- {
- .ifnum = 3,
- .type = QUIRK_MIDI_FIXED_ENDPOINT,
- .data = & (const struct snd_usb_midi_endpoint_info) {
- .out_cables = 0x0003,
- .in_cables = 0x0003
- }
- },
- {
- .ifnum = -1
- }
- }
- }
-},
-{
/* has ID 0x0049 when not in "Advanced Driver" mode */
USB_DEVICE(0x0582, 0x0047),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {