arm/dt: msm8226: camera: Enable ov8825 and ov9724 for 8x26
Make DTS file update to enable ov8825 on 8x26 CDP MTP QRD.
8x26 sensor is OV8825(Main sensor), ov9724(front sensor).
Then enable these two sensors for 8x26 CDP, MTP, QRD.
Change-Id: Iafb9af8cce8acc4a800a0c7dec0c60c04d4323d8
Signed-off-by: Su Liu <suliu@codeaurora.org>
diff --git a/arch/arm/boot/dts/msm8226-camera-sensor-cdp-mtp-qrd.dtsi b/arch/arm/boot/dts/msm8226-camera-sensor-cdp-mtp-qrd.dtsi
new file mode 100644
index 0000000..133dcac
--- /dev/null
+++ b/arch/arm/boot/dts/msm8226-camera-sensor-cdp-mtp-qrd.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&cci {
+ qcom,camera@6f {
+ compatible = "qcom,ov8825";
+ reg = <0x6f>;
+ qcom,slave-id = <0x6c 0x300a 0x8825>;
+ qcom,csiphy-sd-index = <0>;
+ qcom,csid-sd-index = <0>;
+ qcom,mount-angle = <90>;
+ qcom,sensor-name = "ov8825";
+ cam_vdig-supply = <&pm8226_l5>;
+ cam_vana-supply = <&pm8226_l19>;
+ cam_vio-supply = <&pm8226_lvs1>;
+ cam_vaf-supply = <&pm8226_l15>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
+ "cam_vaf";
+ qcom,cam-vreg-type = <0 1 0 0>;
+ qcom,cam-vreg-min-voltage = <1200000 0 2850000 2800000>;
+ qcom,cam-vreg-max-voltage = <1200000 0 2850000 2800000>;
+ qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
+ qcom,gpio-no-mux = <0>;
+ gpios = <&msmgpio 26 0>,
+ <&msmgpio 37 0>,
+ <&msmgpio 36 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-standby = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK",
+ "CAM_RESET1",
+ "CAM_STANDBY";
+ qcom,csi-lane-assign = <0x4320>;
+ qcom,csi-lane-mask = <0x1f>;
+ qcom,sensor-position = <0>;
+ qcom,sensor-mode = <1>;
+ qcom,cci-master = <0>;
+ };
+
+ qcom,camera@6d {
+ compatible = "qcom,ov9724";
+ reg = <0x6d>;
+ qcom,slave-id = <0x20 0x0 0x9724>;
+ qcom,csiphy-sd-index = <1>;
+ qcom,csid-sd-index = <0>;
+ qcom,mount-angle = <90>;
+ qcom,sensor-name = "ov9724";
+ cam_vdig-supply = <&pm8226_l5>;
+ cam_vana-supply = <&pm8226_l19>;
+ cam_vio-supply = <&pm8226_lvs1>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
+ qcom,cam-vreg-type = <0 1 0>;
+ qcom,cam-vreg-min-voltage = <1200000 0 2850000>;
+ qcom,cam-vreg-max-voltage = <1200000 0 2850000>;
+ qcom,cam-vreg-op-mode = <200000 0 80000>;
+ qcom,gpio-no-mux = <0>;
+ gpios = <&msmgpio 26 0>,
+ <&msmgpio 28 0>,
+ <&msmgpio 35 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-standby = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK",
+ "CAM_RESET",
+ "CAM_STANDBY";
+ qcom,gpio-set-tbl-num = <1 1>;
+ qcom,gpio-set-tbl-flags = <0 2>;
+ qcom,gpio-set-tbl-delay = <1000 4000>;
+ qcom,csi-lane-assign = <0x4320>;
+ qcom,csi-lane-mask = <0x3>;
+ qcom,sensor-position = <1>;
+ qcom,sensor-mode = <1>;
+ qcom,cci-master = <0>;
+ status = "ok";
+ };
+};
diff --git a/arch/arm/boot/dts/msm8226-camera.dtsi b/arch/arm/boot/dts/msm8226-camera.dtsi
index 2a9fdf2..425f358 100644
--- a/arch/arm/boot/dts/msm8226-camera.dtsi
+++ b/arch/arm/boot/dts/msm8226-camera.dtsi
@@ -1,4 +1,5 @@
-/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+/*
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -11,8 +12,113 @@
*/
/ {
- qcom,cam_server {
- compatible = "qcom,cam_server";
- reg = <0xfd8C0000 0x10000>;
+ qcom,msm-cam@fd8c0000 {
+ compatible = "qcom,msm-cam";
+ reg = <0xfd8c0000 0x10000>;
+ reg-names = "msm-cam";
+ };
+
+ qcom,csiphy@fda0ac00 {
+ cell-index = <0>;
+ compatible = "qcom,csiphy";
+ reg = <0xfda0ac00 0x200>;
+ reg-names = "csiphy";
+ interrupts = <0 78 0>;
+ interrupt-names = "csiphy";
+ };
+
+ qcom,csiphy@fda0b000 {
+ cell-index = <1>;
+ compatible = "qcom,csiphy";
+ reg = <0xfda0b000 0x200>;
+ reg-names = "csiphy";
+ interrupts = <0 79 0>;
+ interrupt-names = "csiphy";
+ };
+
+ qcom,csid@fda08000 {
+ cell-index = <0>;
+ compatible = "qcom,csid";
+ reg = <0xfda08000 0x100>;
+ reg-names = "csid";
+ interrupts = <0 51 0>;
+ interrupt-names = "csid";
+ qcom,csi-vdd-voltage = <1200000>;
+ qcom,mipi-csi-vdd-supply = <&pm8226_l4>;
+ };
+
+ qcom,csid@fda08400 {
+ cell-index = <1>;
+ compatible = "qcom,csid";
+ reg = <0xfda08400 0x100>;
+ reg-names = "csid";
+ interrupts = <0 52 0>;
+ interrupt-names = "csid";
+ qcom,csi-vdd-voltage = <1200000>;
+ qcom,mipi-csi-vdd-supply = <&pm8226_l4>;
+ };
+
+ qcom,ispif@fda0a000 {
+ cell-index = <0>;
+ compatible = "qcom,ispif";
+ reg = <0xfda0a000 0x500>;
+ reg-names = "ispif";
+ interrupts = <0 55 0>;
+ interrupt-names = "ispif";
+ };
+
+ qcom,vfe@fda10000 {
+ cell-index = <0>;
+ compatible = "qcom,vfe40";
+ reg = <0xfda10000 0x1000>,
+ <0xfda40000 0x200>;
+ reg-names = "vfe", "vfe_vbif";
+ interrupts = <0 57 0>;
+ interrupt-names = "vfe";
+ vdd-supply = <&gdsc_vfe>;
+ };
+
+ qcom,jpeg@fda1c000 {
+ cell-index = <0>;
+ compatible = "qcom,jpeg";
+ reg = <0xfda1c000 0x400>;
+ reg-names = "jpeg";
+ interrupts = <0 59 0>;
+ interrupt-names = "jpeg";
+ vdd-supply = <&gdsc_jpeg>;
+ };
+
+ qcom,irqrouter@fda00000 {
+ cell-index = <0>;
+ compatible = "qcom,irqrouter";
+ reg = <0xfda00000 0x100>;
+ reg-names = "irqrouter";
+ };
+
+ cci: qcom,cci@fda0c000 {
+ cell-index = <0>;
+ compatible = "qcom,cci";
+ reg = <0xfda0c000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg-names = "cci";
+ interrupts = <0 50 0>;
+ interrupt-names = "cci";
+ gpios = <&msmgpio 29 0>,
+ <&msmgpio 30 0>;
+ qcom,gpio-tbl-num = <0 1>;
+ qcom,gpio-tbl-flags = <1 1>;
+ qcom,gpio-tbl-label = "CCI_I2C_DATA0",
+ "CCI_I2C_CLK0";
+ qcom,hw-thigh = <78>;
+ qcom,hw-tlow = <114>;
+ qcom,hw-tsu-sto = <28>;
+ qcom,hw-tsu-sta = <28>;
+ qcom,hw-thd-dat = <10>;
+ qcom,hw-thd-sta = <77>;
+ qcom,hw-tbuf = <118>;
+ qcom,hw-scl-stretch-en = <0>;
+ qcom,hw-trdhld = <6>;
+ qcom,hw-tsp = <1>;
};
};
diff --git a/arch/arm/boot/dts/msm8226-cdp.dts b/arch/arm/boot/dts/msm8226-cdp.dts
index c303061..04b7c7e 100644
--- a/arch/arm/boot/dts/msm8226-cdp.dts
+++ b/arch/arm/boot/dts/msm8226-cdp.dts
@@ -13,6 +13,7 @@
/dts-v1/;
/include/ "msm8226.dtsi"
/include/ "dsi-panel-nt35590-720p-video.dtsi"
+/include/ "msm8226-camera-sensor-cdp-mtp-qrd.dtsi"
/ {
model = "Qualcomm MSM 8226 CDP";
diff --git a/arch/arm/boot/dts/msm8226-mtp.dts b/arch/arm/boot/dts/msm8226-mtp.dts
index a18bad3..e12bb64 100644
--- a/arch/arm/boot/dts/msm8226-mtp.dts
+++ b/arch/arm/boot/dts/msm8226-mtp.dts
@@ -13,6 +13,7 @@
/dts-v1/;
/include/ "msm8226.dtsi"
/include/ "dsi-panel-nt35590-720p-video.dtsi"
+/include/ "msm8226-camera-sensor-cdp-mtp-qrd.dtsi"
/ {
model = "Qualcomm MSM 8226 MTP";
diff --git a/arch/arm/boot/dts/msm8226-qrd.dts b/arch/arm/boot/dts/msm8226-qrd.dts
index e137ee2..cdefdd0 100644
--- a/arch/arm/boot/dts/msm8226-qrd.dts
+++ b/arch/arm/boot/dts/msm8226-qrd.dts
@@ -13,6 +13,7 @@
/dts-v1/;
/include/ "msm8226.dtsi"
/include/ "dsi-panel-nt35590-720p-video.dtsi"
+/include/ "msm8226-camera-sensor-cdp-mtp-qrd.dtsi"
/ {
model = "Qualcomm MSM 8226 QRD";
diff --git a/arch/arm/boot/dts/msm8226.dtsi b/arch/arm/boot/dts/msm8226.dtsi
index af1faab..9fb55c9 100644
--- a/arch/arm/boot/dts/msm8226.dtsi
+++ b/arch/arm/boot/dts/msm8226.dtsi
@@ -12,6 +12,7 @@
/include/ "skeleton.dtsi"
/include/ "msm8226-ion.dtsi"
+/include/ "msm8226-camera.dtsi"
/include/ "msm-gdsc.dtsi"
/include/ "msm8226-iommu.dtsi"
/include/ "msm8226-pm.dtsi"