blob: 2dc040c1509ece16e32cb1921a8182de87dcc1d5 [file] [log] [blame]
/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "msm9625-v2-1.dtsi"
/ {
model = "Qualcomm MSM 9625V2.1 MTP";
compatible = "qcom,msm9625-mtp", "qcom,msm9625";
qcom,msm-id = <134 7 0x20001>, <152 7 0x20001>, <149 7 0x20001>,
<150 7 0x20001>, <151 7 0x20001>, <148 7 0x20001>,
<173 7 0x20001>, <174 7 0x20001>, <175 7 0x20001>;
i2c@f9925000 {
charger@57 {
compatible = "summit,smb137c";
reg = <0x57>;
summit,chg-current-ma = <1500>;
summit,term-current-ma = <50>;
summit,pre-chg-current-ma = <100>;
summit,float-voltage-mv = <4200>;
summit,thresh-voltage-mv = <3000>;
summit,recharge-thresh-mv = <75>;
summit,system-voltage-mv = <4250>;
summit,charging-timeout = <382>;
summit,pre-charge-timeout = <48>;
summit,therm-current-ua = <10>;
summit,temperature-min = <4>; /* 0 C */
summit,temperature-max = <3>; /* 45 C */
};
};
wlan0: qca,wlan {
cell-index = <0>;
compatible = "qca,ar6004-sdio";
qca,chip-pwd-l-gpios = <&msmgpio 62 0>;
qca,pm-enable-gpios = <&pm8019_gpios 3 0x0>;
qca,ar6004-vdd-io-supply = <&pm8019_l11>;
};
};
/* PM8019 GPIO and MPP configuration */
&pm8019_gpios {
gpio@c000 { /* GPIO 1 */
};
gpio@c100 { /* GPIO 2 */
};
gpio@c200 { /* GPIO 3 */
};
gpio@c300 { /* GPIO 4 */
/* ext_2p95v regulator enable config */
qcom,mode = <1>; /* Digital output */
qcom,output-type = <0>; /* CMOS */
qcom,invert = <0>; /* Output low */
qcom,out-strength = <1>; /* Low */
qcom,vin-sel = <2>; /* PM8019 L11 - 1.8V */
qcom,src-sel = <0>; /* Constant */
qcom,master-en = <1>; /* Enable GPIO */
};
gpio@c400 { /* GPIO 5 */
};
gpio@c500 { /* GPIO 6 */
};
};
&pm8019_mpps {
mpp@a000 { /* MPP 1 */
};
mpp@a100 { /* MPP 2 */
};
mpp@a200 { /* MPP 3 */
};
mpp@a300 { /* MPP 4 */
};
mpp@a400 { /* MPP 5 */
};
mpp@a500 { /* MPP 6 */
};
};