coresight: 8974: add regulator & gpio properties to tpiu dt node
In preparation for tpiu driver support to output trace data via
the mictor connector or sdc connector, add regulator and gpio
properties to tpiu DT node.
Change-Id: I95c52c5fd40da05dab291e108ef529237d99cb37
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
diff --git a/arch/arm/boot/dts/msm8974-cdp.dtsi b/arch/arm/boot/dts/msm8974-cdp.dtsi
index 1a57534..9d98476 100644
--- a/arch/arm/boot/dts/msm8974-cdp.dtsi
+++ b/arch/arm/boot/dts/msm8974-cdp.dtsi
@@ -617,6 +617,55 @@
};
};
+/* CoreSight */
+&tpiu {
+ qcom,seta-gpios = <&msmgpio 31 0>,
+ <&msmgpio 32 0>,
+ <&msmgpio 33 0>,
+ <&msmgpio 34 0>,
+ <&msmgpio 35 0>,
+ <&msmgpio 36 0>,
+ <&msmgpio 37 0>,
+ <&msmgpio 38 0>,
+ <&msmgpio 39 0>,
+ <&msmgpio 40 0>,
+ <&msmgpio 41 0>,
+ <&msmgpio 42 0>,
+ <&msmgpio 43 0>,
+ <&msmgpio 44 0>,
+ <&msmgpio 45 0>,
+ <&msmgpio 46 0>,
+ <&msmgpio 47 0>,
+ <&msmgpio 48 0>;
+ qcom,seta-gpios-func = <4 4 4 3 4 4 4 3 4 3 5 5 5 5 4 4 5 5>;
+ qcom,seta-gpios-drv = <7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7>;
+ qcom,seta-gpios-pull = <0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0>;
+ qcom,seta-gpios-dir = <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>;
+
+ qcom,setb-gpios = <&msmgpio 15 0>,
+ <&msmgpio 16 0>,
+ <&msmgpio 17 0>,
+ <&msmgpio 18 0>,
+ <&msmgpio 19 0>,
+ <&msmgpio 20 0>,
+ <&msmgpio 21 0>,
+ <&msmgpio 22 0>,
+ <&msmgpio 23 0>,
+ <&msmgpio 24 0>,
+ <&msmgpio 25 0>,
+ <&msmgpio 26 0>,
+ <&msmgpio 27 0>,
+ <&msmgpio 28 0>,
+ <&msmgpio 89 0>,
+ <&msmgpio 90 0>,
+ <&msmgpio 91 0>,
+ <&msmgpio 92 0>;
+ qcom,setb-gpios-func = <2 2 2 2 5 5 5 5 6 6 6 7 7 5 2 3 3 3>;
+ qcom,setb-gpios-drv = <7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7>;
+ qcom,setb-gpios-pull = <0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0>;
+ qcom,setb-gpios-dir = <2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2>;
+};
+
&slim_msm {
taiko_codec {
qcom,cdc-micbias1-ext-cap;
diff --git a/arch/arm/boot/dts/msm8974-coresight.dtsi b/arch/arm/boot/dts/msm8974-coresight.dtsi
index 5df8f10..109a9fe 100644
--- a/arch/arm/boot/dts/msm8974-coresight.dtsi
+++ b/arch/arm/boot/dts/msm8974-coresight.dtsi
@@ -34,6 +34,11 @@
coresight-id = <1>;
coresight-name = "coresight-tpiu";
coresight-nr-inports = <1>;
+
+ vdd-supply = <&pm8941_l21>;
+
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <9000 800000>;
};
replicator: replicator@fc31c000 {