[ARM] pxa/balloon3: Add NAND driver
The NAND support is implemented through the gen_nand driver.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 238f887..eec92e6 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -31,12 +31,15 @@
#define BALLOON3_CF_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
/* FPGA / CPLD version register */
#define BALLOON3_FPGA_VER (BALLOON3_FPGA_VIRT + 0x00e0001c)
+/* FPGA / CPLD registers for NAND flash */
+#define BALLOON3_NAND_BASE (PXA_CS4_PHYS + 0x00e00000)
+#define BALLOON3_NAND_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
+#define BALLOON3_NAND_CONTROL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_STAT_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NAND_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
-#define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
/* fpga/cpld interrupt control register */
#define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C)
-#define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
-#define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
#define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c)
#define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000)
@@ -56,6 +59,22 @@
#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
+/* NAND Control register */
+#define BALLOON3_NAND_CONTROL_FLWP (1 << 7)
+#define BALLOON3_NAND_CONTROL_FLSE (1 << 6)
+#define BALLOON3_NAND_CONTROL_FLCE3 (1 << 5)
+#define BALLOON3_NAND_CONTROL_FLCE2 (1 << 4)
+#define BALLOON3_NAND_CONTROL_FLCE1 (1 << 3)
+#define BALLOON3_NAND_CONTROL_FLCE0 (1 << 2)
+#define BALLOON3_NAND_CONTROL_FLALE (1 << 1)
+#define BALLOON3_NAND_CONTROL_FLCLE (1 << 0)
+
+/* NAND Status register */
+#define BALLOON3_NAND_STAT_RNB (1 << 0)
+
+/* NAND Control2 register */
+#define BALLOON3_NAND_CONTROL2_16BIT (1 << 0)
+
/* GPIOs for irqs */
#define BALLOON3_GPIO_AUX_NIRQ (94)
#define BALLOON3_GPIO_CODEC_IRQ (95)
@@ -69,6 +88,9 @@
#define BALLOON3_GPIO_S0_CD (105)
+/* NAND */
+#define BALLOON3_GPIO_RUN_NAND (102)
+
/* PCF8574A Leds */
#define BALLOON3_PCF_GPIO_BASE 160
#define BALLOON3_PCF_GPIO_LED0 (BALLOON3_PCF_GPIO_BASE + 0)