Merge branch 'samsung/ohci' into next/drivers

* samsung/ohci:
  ARM: EXYNOS: Add USB OHCI support to ORIGEN board
  USB: Add Samsung Exynos OHCI diver
  ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
  ARM: EXYNOS: Add USB OHCI device
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
new file mode 100644
index 0000000..44afa0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -0,0 +1,25 @@
+* Cadence MACB/GEM Ethernet controller
+
+Required properties:
+- compatible: Should be "cdns,[<chip>-]{macb|gem}"
+  Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
+  Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
+  Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on
+  the Cadence GEM, or the generic form: "cdns,gem".
+- reg: Address and length of the register set for the device
+- interrupts: Should contain macb interrupt
+- phy-mode: String, operation mode of the PHY interface.
+  Supported values are: "mii", "rmii", "gmii", "rgmii".
+
+Optional properties:
+- local-mac-address: 6 bytes, mac address
+
+Examples:
+
+	macb0: ethernet@fffc4000 {
+		compatible = "cdns,at32ap7000-macb";
+		reg = <0xfffc4000 0x4000>;
+		interrupts = <21>;
+		phy-mode = "rmii";
+		local-mac-address = [3a 0e 03 04 05 06];
+	};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 776d76b..b8c6972 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -592,6 +592,7 @@
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select GPIO_PXA
 	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select PLAT_PXA
@@ -674,6 +675,7 @@
 	select CLKSRC_MMIO
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
+	select GPIO_PXA
 	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select PLAT_PXA
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index aeef042..07603b8 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -114,6 +114,13 @@
 				atmel,use-dma-tx;
 				status = "disabled";
 			};
+
+			macb0: ethernet@fffc4000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xfffc4000 0x100>;
+				interrupts = <21>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index db6a452..fffa005 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -101,6 +101,13 @@
 				atmel,use-dma-tx;
 				status = "disabled";
 			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xfffbc000 0x100>;
+				interrupts = <25>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 85b34f5..a387e77 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -30,6 +30,11 @@
 			usart1: serial@fff90000 {
 				status = "okay";
 			};
+
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index d66e2c0..f04b535 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -25,6 +25,11 @@
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
 		};
 	};
 };
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index ecdd54d..17632b8 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -137,7 +137,7 @@
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-	.name		= "macb_clk",
+	.name		= "pclk",
 	.pmc_mask	= 1 << AT91CAP9_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -210,6 +210,8 @@
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+	/* One additional fake clock for macb_hclk */
+	CLKDEV_CON_ID("hclk", &macb_clk),
 	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
 	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index adad70d..695aeca 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -200,7 +200,7 @@
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
@@ -227,7 +227,7 @@
 	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
 	if (!data)
 		return;
@@ -264,7 +264,7 @@
 	platform_device_register(&at91cap9_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index ad93068..55d2291 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -135,7 +135,7 @@
 
 #if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
@@ -162,7 +162,7 @@
 	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
 	if (!data)
 		return;
@@ -199,7 +199,7 @@
 	platform_device_register(&at91rm9200_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 0d20677..1c945e3 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -120,7 +120,7 @@
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-	.name		= "macb_clk",
+	.name		= "pclk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -190,6 +190,8 @@
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+	/* One additional fake clock for macb_hclk */
+	CLKDEV_CON_ID("hclk", &macb_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 629fa97..b1a4812 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -136,7 +136,7 @@
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
@@ -163,7 +163,7 @@
 	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
 	if (!data)
 		return;
@@ -200,7 +200,7 @@
 	platform_device_register(&at91sam9260_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f83fbb0..182d112 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -118,7 +118,7 @@
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-	.name		= "macb_clk",
+	.name		= "pclk",
 	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -182,6 +182,8 @@
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+	/* One additional fake clock for macb_hclk */
+	CLKDEV_CON_ID("hclk", &macb_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index d5fbac9..183b5f1 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -144,7 +144,7 @@
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
@@ -171,7 +171,7 @@
 	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
 	if (!data)
 		return;
@@ -208,7 +208,7 @@
 	platform_device_register(&at91sam9263_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 318b040..5a0e522 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -150,7 +150,7 @@
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 static struct clk macb_clk = {
-	.name		= "macb_clk",
+	.name		= "pclk",
 	.pmc_mask	= 1 << AT91SAM9G45_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -209,6 +209,8 @@
 };
 
 static struct clk_lookup periph_clocks_lookups[] = {
+	/* One additional fake clock for macb_hclk */
+	CLKDEV_CON_ID("hclk", &macb_clk),
 	/* One additional fake clock for ohci */
 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
 	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 09a16d6..e2cb835 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -284,7 +284,7 @@
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
@@ -311,7 +311,7 @@
 	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
 {
 	if (!data)
 		return;
@@ -348,7 +348,7 @@
 	platform_device_register(&at91sam9g45_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 367d5cd..a60d98d 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -63,7 +63,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata onearm_eth_data = {
+static struct macb_platform_data __initdata onearm_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 4282d96..17fc779 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -103,7 +103,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata afeb9260_macb_data = {
+static struct macb_platform_data __initdata afeb9260_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA9,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index f90cfb3..2037d2c4 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -115,7 +115,7 @@
 /*
  * MACB Ethernet device
  */
-static struct __initdata at91_eth_data cam60_macb_data = {
+static struct __initdata macb_platform_data cam60_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PB5,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 5dffd3b..af5520c 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -153,7 +153,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata cap9adk_macb_data = {
+static struct macb_platform_data __initdata cap9adk_macb_data = {
 	.is_rmii	= 1,
 };
 
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 774c87f..529b356 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -57,7 +57,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata carmeva_eth_data = {
+static struct macb_platform_data __initdata carmeva_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index fc885a4..04d2b9b 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -99,7 +99,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata cpu9krea_macb_data = {
+static struct macb_platform_data __initdata cpu9krea_macb_data = {
 	.is_rmii	= 1,
 };
 
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index d35e65b..7a4c82e 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -82,7 +82,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata cpuat91_eth_data = {
+static struct macb_platform_data __initdata cpuat91_eth_data = {
 	.is_rmii	= 1,
 };
 
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index c393666..b004b20 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -58,7 +58,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata csb337_eth_data = {
+static struct macb_platform_data __initdata csb337_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC2,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 586100e..e966de5 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -52,7 +52,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata csb637_eth_data = {
+static struct macb_platform_data __initdata csb637_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC0,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 45db7a3..3788fa5 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -60,7 +60,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata eb9200_eth_data = {
+static struct macb_platform_data __initdata eb9200_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 2f9c16d2..af7622e 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -64,7 +64,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata ecb_at91eth_data = {
+static struct macb_platform_data __initdata ecb_at91eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 8252c72..8e75867 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -47,7 +47,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata eco920_eth_data = {
+static struct macb_platform_data __initdata eco920_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC2,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index f27d1a7..de8e096 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -135,7 +135,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata foxg20_macb_data = {
+static struct macb_platform_data __initdata foxg20_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA7,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 2e95949..51c82f1 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -93,7 +93,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA28,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 3bae73e..9628a3d 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -61,7 +61,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata kafa_eth_data = {
+static struct macb_platform_data __initdata kafa_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index e61351f..5ba5244 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -69,7 +69,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata kb9202_eth_data = {
+static struct macb_platform_data __initdata kb9202_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PB29,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index ef816c1..56e7aee 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -155,7 +155,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata neocore926_macb_data = {
+static struct macb_platform_data __initdata neocore926_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PE31,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 49e3f69..c545a3e 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -122,7 +122,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA28,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 0a8fe6a..dc18759 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -60,7 +60,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata picotux200_eth_data = {
+static struct macb_platform_data __initdata picotux200_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 07421bd..5444d6a 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -104,7 +104,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA31,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 80a8c9c..022d0ce 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -65,7 +65,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata dk_eth_data = {
+static struct macb_platform_data __initdata dk_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 99fd7f8..ed27586 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -65,7 +65,7 @@
 	at91_set_serial_console(0);
 }
 
-static struct at91_eth_data __initdata ek_eth_data = {
+static struct macb_platform_data __initdata ek_eth_data = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index e927df0..ed3b21f 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -60,7 +60,7 @@
 /*
  * Ethernet
  */
-static struct at91_eth_data rsi_ews_eth_data __initdata = {
+static struct macb_platform_data rsi_ews_eth_data __initdata = {
 	.phy_irq_pin	= AT91_PIN_PC4,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 072d53a..3e4b50e 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -109,7 +109,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA7,
 	.is_rmii	= 0,
 };
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4f10181..13478e1 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -151,7 +151,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA7,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index bccdcf2..fcf194e 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -158,7 +158,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PE31,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 64fc75c..78d27cc 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -123,7 +123,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA7,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 92de912..4e1ee9d 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -115,7 +115,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PD5,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 0df01c6..fbec934 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -65,7 +65,7 @@
 	.vbus_polled		= 1,
 };
 
-static struct at91_eth_data snapper9260_macb_data = {
+static struct macb_platform_data snapper9260_macb_data = {
 	.is_rmii	= 1,
 };
 
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 936e5fd..7c06c07 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -157,7 +157,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA28,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 0a20bab..3d84233 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -146,7 +146,7 @@
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PE31,
 	.is_rmii	= 1,
 };
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 12a3f95..2c40a21 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -110,7 +110,7 @@
 /*
  * Ethernet
  */
-static struct at91_eth_data __initdata yl9200_eth_data = {
+static struct macb_platform_data __initdata yl9200_eth_data = {
 	.phy_irq_pin		= AT91_PIN_PB28,
 	.is_rmii		= 1,
 };
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index eac92e9..e209a29 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -40,6 +40,7 @@
 #include <linux/atmel-mci.h>
 #include <sound/atmel-ac97c.h>
 #include <linux/serial.h>
+#include <linux/platform_data/macb.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -81,18 +82,7 @@
   /* atmel-mci platform config */
 extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
 
- /* Ethernet (EMAC & MACB) */
-struct at91_eth_data {
-	u32		phy_mask;
-	u8		phy_irq_pin;	/* PHY IRQ */
-	u8		is_rmii;	/* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45)
-#define eth_platform_data	at91_eth_data
-#endif
+extern void __init at91_add_device_eth(struct macb_platform_data *data);
 
  /* USB Host */
 struct at91_usbh_data {
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 7a60bbb..f0d236d 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -120,8 +120,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= gpio_to_irq(27),
-		.end	= gpio_to_irq(27),
+		.start	= MMP_GPIO_TO_IRQ(27),
+		.end	= MMP_GPIO_TO_IRQ(27),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
@@ -232,6 +232,7 @@
 	pxa168_add_nand(&aspenite_nand_info);
 	pxa168_add_fb(&aspenite_lcd_info);
 	pxa168_add_keypad(&aspenite_keypad_info);
+	platform_device_register(&pxa168_device_gpio);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 39f0878..c5d53e0 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -38,6 +38,7 @@
 
 	/* on-chip devices */
 	pxa168_add_uart(2);
+	platform_device_register(&pxa168_device_gpio);
 }
 
 MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 983cfb1..eb07565 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -202,6 +202,7 @@
 	/* on-chip devices */
 	mmp2_add_uart(1);
 	mmp2_add_uart(3);
+	platform_device_register(&mmp2_device_gpio);
 	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
 	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
 	mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index c4fd806..c1f0aa8 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -87,8 +87,8 @@
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = gpio_to_irq(155),
-		.end    = gpio_to_irq(155),
+		.start  = MMP_GPIO_TO_IRQ(155),
+		.end    = MMP_GPIO_TO_IRQ(155),
 		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
@@ -110,6 +110,7 @@
 	/* on-chip devices */
 	mmp2_add_uart(1);
 	mmp2_add_uart(2);
+	platform_device_register(&mmp2_device_gpio);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 4665767..e266f66 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -184,6 +184,7 @@
 	pxa168_add_uart(3);
 	pxa168_add_ssp(1);
 	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
+	platform_device_register(&pxa168_device_gpio);
 
 	pxa168_add_eth(&gplugd_eth_platform_data);
 }
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
index 99b4ce1..0e135a5 100644
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -2,6 +2,7 @@
 #define __ASM_MACH_GPIO_PXA_H
 
 #include <mach/addr-map.h>
+#include <mach/cputype.h>
 #include <mach/irqs.h>
 
 #define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
@@ -9,8 +10,6 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
 
-#define NR_BUILTIN_GPIO		IRQ_GPIO_NUM
-
 #define gpio_to_bank(gpio)	((gpio) >> 5)
 
 /* NOTE: these macros are defined here to make optimization of
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index 68126235..13219eb 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -3,11 +3,6 @@
 
 #include <asm-generic/gpio.h>
 
-#define gpio_to_irq(gpio)	(IRQ_GPIO_START + (gpio))
-#define irq_to_gpio(irq)	((irq) - IRQ_GPIO_START)
+#include <mach/cputype.h>
 
-#define __gpio_is_inverted(gpio)	(0)
-#define __gpio_is_occupied(gpio)	(0)
-
-#include <plat/gpio.h>
 #endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index a09d328..34635a0 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -219,10 +219,10 @@
 #define IRQ_MMP2_MUX_END		(IRQ_MMP2_SSP_BASE + 2)
 
 #define IRQ_GPIO_START			128
-#define IRQ_GPIO_NUM			192
-#define IRQ_GPIO(x)			(IRQ_GPIO_START + (x))
+#define MMP_NR_BUILTIN_GPIO		192
+#define MMP_GPIO_TO_IRQ(gpio)		(IRQ_GPIO_START + (gpio))
 
-#define IRQ_BOARD_START			(IRQ_GPIO_START + IRQ_GPIO_NUM)
+#define IRQ_BOARD_START			(IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO)
 
 #define NR_IRQS				(IRQ_BOARD_START)
 
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index 2f7b2d3..cba22fe 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -32,6 +32,8 @@
 extern struct pxa_device_desc mmp2_device_asram;
 extern struct pxa_device_desc mmp2_device_isram;
 
+extern struct platform_device mmp2_device_gpio;
+
 static inline int mmp2_add_uart(int id)
 {
 	struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 7fb568d..f928608 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -42,6 +42,8 @@
 /* pdata can be NULL */
 int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
 
+extern struct platform_device pxa168_device_gpio;
+
 static inline int pxa168_add_uart(int id)
 {
 	struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 91be755..4de13ab 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -21,6 +21,8 @@
 extern struct pxa_device_desc pxa910_device_pwm4;
 extern struct pxa_device_desc pxa910_device_nand;
 
+extern struct platform_device pxa910_device_gpio;
+
 static inline int pxa910_add_uart(int id)
 {
 	struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 5dd1d4a..617c60a 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include <asm/hardware/cache-tauros2.h>
 
@@ -24,7 +25,6 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 #include <mach/mfp.h>
-#include <mach/gpio-pxa.h>
 #include <mach/devices.h>
 #include <mach/mmp2.h>
 
@@ -33,8 +33,6 @@
 
 #define MFPR_VIRT_BASE	(APB_VIRT_BASE + 0x1e000)
 
-#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
-
 static struct mfp_addr_map mmp2_addr_map[] __initdata = {
 
 	MFP_ADDR_X(GPIO0, GPIO58, 0x54),
@@ -95,24 +93,9 @@
 	__raw_writel(data, mfpr_pmic);
 }
 
-static void __init mmp2_init_gpio(void)
-{
-	int i;
-
-	/* enable GPIO clock */
-	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
-
-	/* unmask GPIO edge detection for all 6 banks -- APMASKx */
-	for (i = 0; i < 6; i++)
-		__raw_writel(0xffffffff, APMASK(i));
-
-	pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
-}
-
 void __init mmp2_init_irq(void)
 {
 	mmp2_init_icu();
-	mmp2_init_gpio();
 }
 
 static void sdhc_clk_enable(struct clk *clk)
@@ -149,6 +132,7 @@
 static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
 static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
 static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
+static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000);
 
 static APMU_CLK(nand, NAND, 0xbf, 100000000);
 static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
@@ -168,6 +152,7 @@
 	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
 	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
 	INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
 	INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
@@ -230,3 +215,21 @@
 /* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
 MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
 
+struct resource mmp2_resource_gpio[] = {
+	{
+		.start	= 0xd4019000,
+		.end	= 0xd4019fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_MMP2_GPIO,
+		.end	= IRQ_MMP2_GPIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mmp2_device_gpio = {
+	.name		= "pxa-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(mmp2_resource_gpio),
+	.resource	= mmp2_resource_gpio,
+};
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 76ca15c..8424503 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -13,6 +13,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/time.h>
 #include <mach/addr-map.h>
@@ -20,7 +21,6 @@
 #include <mach/regs-apbc.h>
 #include <mach/regs-apmu.h>
 #include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
 #include <mach/dma.h>
 #include <mach/devices.h>
 #include <mach/mfp.h>
@@ -43,26 +43,9 @@
 	MFP_ADDR_END,
 };
 
-#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
-
-static void __init pxa168_init_gpio(void)
-{
-	int i;
-
-	/* enable GPIO clock */
-	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
-
-	/* unmask GPIO edge detection for all 4 banks - APMASKx */
-	for (i = 0; i < 4; i++)
-		__raw_writel(0xffffffff, APMASK(i));
-
-	pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL);
-}
-
 void __init pxa168_init_irq(void)
 {
 	icu_init_irq();
-	pxa168_init_gpio();
 }
 
 /* APB peripheral clocks */
@@ -80,6 +63,7 @@
 static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
 static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
 static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
+static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
 static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
 
 static APMU_CLK(nand, NAND, 0x19b, 156000000);
@@ -105,6 +89,7 @@
 	INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 	INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
 	INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
@@ -174,6 +159,25 @@
 PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
 PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
 
+struct resource pxa168_resource_gpio[] = {
+	{
+		.start	= 0xd4019000,
+		.end	= 0xd4019fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PXA168_GPIOX,
+		.end	= IRQ_PXA168_GPIOX,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa168_device_gpio = {
+	.name		= "pxa-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa168_resource_gpio),
+	.resource	= pxa168_resource_gpio,
+};
+
 struct resource pxa168_usb_host_resources[] = {
 	/* USB Host conroller register base */
 	[0] = {
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 4ebbfbb..3241a25 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 
 #include <asm/mach/time.h>
 #include <mach/addr-map.h>
@@ -19,7 +20,6 @@
 #include <mach/regs-apmu.h>
 #include <mach/cputype.h>
 #include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
 #include <mach/dma.h>
 #include <mach/mfp.h>
 #include <mach/devices.h>
@@ -77,26 +77,9 @@
 	MFP_ADDR_END,
 };
 
-#define APMASK(i)	(GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
-
-static void __init pxa910_init_gpio(void)
-{
-	int i;
-
-	/* enable GPIO clock */
-	__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
-
-	/* unmask GPIO edge detection for all 4 banks - APMASKx */
-	for (i = 0; i < 4; i++)
-		__raw_writel(0xffffffff, APMASK(i));
-
-	pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
-}
-
 void __init pxa910_init_irq(void)
 {
 	icu_init_irq();
-	pxa910_init_gpio();
 }
 
 /* APB peripheral clocks */
@@ -108,6 +91,7 @@
 static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
+static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
 
 static APMU_CLK(nand, NAND, 0x19b, 156000000);
 static APMU_CLK(u2o, USB, 0x1b, 480000000);
@@ -123,6 +107,7 @@
 	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
 	INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
 };
 
@@ -179,3 +164,22 @@
 PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
 PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
+
+struct resource pxa910_resource_gpio[] = {
+	{
+		.start	= 0xd4019000,
+		.end	= 0xd4019fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PXA910_AP_GPIO,
+		.end	= IRQ_PXA910_AP_GPIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa910_device_gpio = {
+	.name		= "pxa-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa910_resource_gpio),
+	.resource	= pxa910_resource_gpio,
+};
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index eb5be87..bb2ddb7 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -19,6 +19,7 @@
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
@@ -71,8 +72,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= gpio_to_irq(80),
-		.end	= gpio_to_irq(80),
+		.start	= MMP_GPIO_TO_IRQ(80),
+		.end	= MMP_GPIO_TO_IRQ(80),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
@@ -93,6 +94,7 @@
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
+	platform_device_register(&pxa910_device_gpio);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index bbe4727..703de85 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -66,7 +66,7 @@
 static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
 	{
 		I2C_BOARD_INFO("ds1337", 0x68),
-		.irq = gpio_to_irq(RTC_INT_GPIO)
+		.irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO)
 	},
 };
 
@@ -78,6 +78,7 @@
 	pxa168_add_uart(1);
 	pxa168_add_keypad(&teton_bga_keypad_info);
 	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
+	platform_device_register(&pxa168_device_gpio);
 }
 
 MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 176515a..a80ed26 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -24,12 +24,13 @@
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
-#define TTCDKB_GPIO_EXT0(x)	(NR_BUILTIN_GPIO + ((x < 0) ? 0 :	\
+#define TTCDKB_GPIO_EXT0(x)	(MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 :	\
 				((x < 16) ? x : 15)))
-#define TTCDKB_GPIO_EXT1(x)	(NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 :	\
+#define TTCDKB_GPIO_EXT1(x)	(MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
 				((x < 16) ? x : 15)))
 
 /*
@@ -122,6 +123,7 @@
 };
 
 static struct platform_device *ttc_dkb_devices[] = {
+	&pxa910_device_gpio,
 	&ttc_dkb_device_onenand,
 };
 
@@ -136,7 +138,7 @@
 	{
 		.type		= "max7312",
 		.addr		= 0x23,
-		.irq		= IRQ_GPIO(80),
+		.irq		= MMP_GPIO_TO_IRQ(80),
 		.platform_data	= &max7312_data,
 	},
 };
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index da6e4aa..df0ad3c 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/jiffies.h>
 #include <linux/clkdev.h>
+#include <linux/spinlock.h>
 
 #include <asm/clkdev.h>
 #include <asm/div64.h>
@@ -29,6 +30,7 @@
 #include <mach/mx28.h>
 #include <mach/common.h>
 #include <mach/clock.h>
+#include <mach/digctl.h>
 
 #include "regs-clkctrl-mx28.h"
 
@@ -43,6 +45,33 @@
 static struct clk saif0_clk;
 static struct clk saif1_clk;
 static struct clk clk32k_clk;
+static DEFINE_SPINLOCK(clkmux_lock);
+
+/*
+ * HW_SAIF_CLKMUX_SEL:
+ *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
+ *		clock pins selected for SAIF1 input clocks.
+ *  CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
+ *		SAIF0 clock inputs selected for SAIF1 input clocks.
+ *  EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
+ *		clocks.
+ *  EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
+ *		clocks.
+ */
+int mxs_saif_clkmux_select(unsigned int clkmux)
+{
+	if (clkmux > 0x3)
+		return -EINVAL;
+
+	spin_lock(&clkmux_lock);
+	__raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX,
+			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR);
+	__raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX,
+			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR);
+	spin_unlock(&clkmux_lock);
+
+	return 0;
+}
 
 static int _raw_clk_enable(struct clk *clk)
 {
@@ -785,6 +814,15 @@
 	clk_set_parent(&saif0_clk, &pll0_clk);
 	clk_set_parent(&saif1_clk, &pll0_clk);
 
+	/*
+	 * Set an initial clock rate for the saif internal logic to work
+	 * properly. This is important when working in EXTMASTER mode that
+	 * uses the other saif's BITCLK&LRCLK but it still needs a basic
+	 * clock which should be fast enough for the internal logic.
+	 */
+	clk_set_rate(&saif0_clk, 24000000);
+	clk_set_rate(&saif1_clk, 24000000);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0);
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index c888710..4f50094 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -47,6 +47,7 @@
 		const struct mxsfb_platform_data *pdata);
 
 extern const struct mxs_saif_data mx28_saif_data[] __initconst;
-#define mx28_add_saif(id)              mxs_add_saif(&mx28_saif_data[id])
+#define mx28_add_saif(id, pdata) \
+	mxs_add_saif(&mx28_saif_data[id], pdata)
 
 struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
index 1ec965e..f6e3a60 100644
--- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c
+++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
@@ -32,7 +32,8 @@
 };
 #endif
 
-struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
+struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
+				const struct mxs_saif_platform_data *pdata)
 {
 	struct resource res[] = {
 		{
@@ -56,5 +57,5 @@
 	};
 
 	return mxs_add_platform_device("mxs-saif", data->id, res,
-					ARRAY_SIZE(res), NULL, 0);
+				ARRAY_SIZE(res), pdata, sizeof(*pdata));
 }
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index 635bb5d..3bbb94f 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -16,6 +16,7 @@
 extern const u32 *mxs_get_ocotp(void);
 extern int mxs_reset_block(void __iomem *);
 extern void mxs_timer_init(struct clk *, int);
+extern int mxs_saif_clkmux_select(unsigned int clkmux);
 
 extern int mx23_register_gpios(void);
 extern int mx23_clocks_init(void);
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index a8080f4..dc369c1 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -94,6 +94,7 @@
 		resource_size_t iobase, int id);
 
 /* saif */
+#include <sound/saif.h>
 struct mxs_saif_data {
 	int id;
 	resource_size_t iobase;
@@ -103,4 +104,5 @@
 };
 
 struct platform_device *__init mxs_add_saif(
-		const struct mxs_saif_data *data);
+		const struct mxs_saif_data *data,
+		const struct mxs_saif_platform_data *pdata);
diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h
new file mode 100644
index 0000000..49a888c
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/digctl.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_DIGCTL_H__
+#define __MACH_DIGCTL_H__
+
+/* MXS DIGCTL SAIF CLKMUX */
+#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
+#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
+
+#define HW_DIGCTL_CTRL			0x0
+#define  BP_DIGCTL_CTRL_SAIF_CLKMUX	10
+#define  BM_DIGCTL_CTRL_SAIF_CLKMUX	(0x3 << 10)
+#endif
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 064ec5a..ac84a10 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -27,6 +27,7 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx28.h>
+#include <mach/digctl.h>
 
 #include "devices-mx28.h"
 
@@ -421,6 +422,18 @@
 	{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
 };
 
+static const struct mxs_saif_platform_data
+			mx28evk_mxs_saif_pdata[] __initconst = {
+	/* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
+	{
+		.master_mode = 1,
+		.master_id = 0,
+	}, {
+		.master_mode = 0,
+		.master_id = 0,
+	},
+};
+
 static void __init mx28evk_init(void)
 {
 	int ret;
@@ -454,8 +467,9 @@
 	else
 		mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
 
-	mx28_add_saif(0);
-	mx28_add_saif(1);
+	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
+	mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
+	mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]);
 
 	mx28_add_mxs_i2c(0);
 	i2c_register_board_info(0, mxs_i2c0_board_info,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 5156468..ba23224 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -404,6 +404,7 @@
 	{
 		.mmc		= 5,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+		.pm_caps	= MMC_PM_KEEP_POWER,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.ocr_mask	= MMC_VDD_165_195,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index d314f03..f7df8d3 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -24,6 +24,7 @@
 #include <linux/i2c/pca953x.h>
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
+#include <linux/mmc/host.h>
 
 #include <mach/hardware.h>
 #include <mach/am35xx.h>
@@ -40,6 +41,7 @@
 
 #include "mux.h"
 #include "control.h"
+#include "hsmmc.h"
 
 #define AM35XX_EVM_MDIO_FREQUENCY	(1000000)
 
@@ -455,6 +457,23 @@
 static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
 };
 
+static struct omap2_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= 127,
+		.gpio_wp	= 126,
+	},
+	{
+		.mmc		= 2,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= 128,
+		.gpio_wp	= 129,
+	},
+	{}      /* Terminator */
+};
+
+
 static void __init am3517_evm_init(void)
 {
 	omap_board_config = am3517_evm_config;
@@ -483,6 +502,9 @@
 
 	/* MUSB */
 	am3517_evm_musb_init();
+
+	/* MMC init function */
+	omap2_hsmmc_init(mmc);
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 5d0064a..9d59451 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -2480,6 +2480,16 @@
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk uart4_fck_am35xx = {
+	.name           = "uart4_fck",
+	.ops            = &clkops_omap2_dflt_wait,
+	.parent         = &per_48m_fck,
+	.enable_reg     = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit     = OMAP3430_EN_UART4_SHIFT,
+	.clkdm_name     = "core_l4_clkdm",
+	.recalc         = &followparent_recalc,
+};
+
 static struct clk gpt2_fck = {
 	.name		= "gpt2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
@@ -3287,7 +3297,7 @@
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs-omap.0",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs_omap",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("omap-mcbsp.1",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK("omap-mcbsp.5",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
@@ -3323,7 +3333,7 @@
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
 	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs-omap.0",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs_omap",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("omap_hsmmc.2",	"ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"icr_ick",	&icr_ick,	CK_34XX | CK_36XX),
 	CLK("omap-aes",	"ick",	&aes2_ick,	CK_34XX | CK_36XX),
@@ -3369,20 +3379,18 @@
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs-omap.0",	"hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs-omap.0",	"fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs-omap.0",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
-	CLK("usbhs-omap.0",	"utmi_p1_gfclk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs-omap.0",	"utmi_p2_gfclk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs-omap.0",	"xclk60mhsp1_ck",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs-omap.0",	"xclk60mhsp2_ck",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs-omap.0",	"usb_host_hs_utmi_p1_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs-omap.0",	"usb_host_hs_utmi_p2_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs-omap.0",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs-omap.0",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
-	CLK("usbhs-omap.0",	"init_60m_fclk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_omap",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("usbhs_omap",	"utmi_p1_gfclk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_omap",	"utmi_p2_gfclk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_omap",	"xclk60mhsp1_ck",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_omap",	"xclk60mhsp2_ck",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_omap",	"usb_host_hs_utmi_p1_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_omap",	"usb_host_hs_utmi_p2_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_omap",	"usb_tll_hs_usb_ch0_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_omap",	"usb_tll_hs_usb_ch1_clk",	&dummy_ck,	CK_3XXX),
+	CLK("usbhs_omap",	"init_60m_fclk",	&dummy_ck,	CK_3XXX),
 	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
 	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_3XXX),
@@ -3403,6 +3411,7 @@
 	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_3XXX),
 	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_3XXX),
 	CLK(NULL,	"uart4_fck",	&uart4_fck,	CK_36XX),
+	CLK(NULL,	"uart4_fck",	&uart4_fck_am35xx, CK_3505 | CK_3517),
 	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_3XXX),
 	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_3XXX),
 	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 0798a80..c8a1b27 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3295,7 +3295,7 @@
 	CLK(NULL,	"uart2_fck",			&uart2_fck,	CK_443X),
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
-	CLK("usbhs-omap.0",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
+	CLK("usbhs_omap",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
 	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk,	CK_443X),
@@ -3306,7 +3306,7 @@
 	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
-	CLK("usbhs-omap.0",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
+	CLK("usbhs_omap",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
 	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
 	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
 	CLK("musb-omap2430",	"ick",				&usb_otg_hs_ick,	CK_443X),
@@ -3314,7 +3314,7 @@
 	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
-	CLK("usbhs-omap.0",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK("usbhs_omap",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
 	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
@@ -3374,8 +3374,8 @@
 	CLK(NULL,	"uart2_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart3_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart4_ick",			&dummy_ck,	CK_443X),
-	CLK("usbhs-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
-	CLK("usbhs-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
+	CLK("usbhs_omap",	"usbhost_ick",		&dummy_ck,		CK_443X),
+	CLK("usbhs_omap",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
 	CLK("omap_timer.1",	"32k_ck",	&sys_32k_ck,	CK_443X),
 	CLK("omap_timer.2",	"32k_ck",	&sys_32k_ck,	CK_443X),
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index f4a1020..bd844af 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -171,6 +171,17 @@
 	}
 }
 
+static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
+{
+	u32 reg;
+
+	if (mmc->slots[0].internal_clock) {
+		reg = omap_ctrl_readl(control_devconf1_offset);
+		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+		omap_ctrl_writel(reg, control_devconf1_offset);
+	}
+}
+
 static void hsmmc23_before_set_reg(struct device *dev, int slot,
 				   int power_on, int vdd)
 {
@@ -179,16 +190,19 @@
 	if (mmc->slots[0].remux)
 		mmc->slots[0].remux(dev, slot, power_on);
 
-	if (power_on) {
-		/* Only MMC2 supports a CLKIN */
-		if (mmc->slots[0].internal_clock) {
-			u32 reg;
+	if (power_on)
+		hsmmc2_select_input_clk_src(mmc);
+}
 
-			reg = omap_ctrl_readl(control_devconf1_offset);
-			reg |= OMAP2_MMCSDIO2ADPCLKISEL;
-			omap_ctrl_writel(reg, control_devconf1_offset);
-		}
-	}
+static int am35x_hsmmc2_set_power(struct device *dev, int slot,
+				  int power_on, int vdd)
+{
+	struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+	if (power_on)
+		hsmmc2_select_input_clk_src(mmc);
+
+	return 0;
 }
 
 static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
@@ -200,10 +214,12 @@
 static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
 {
-	if (gpio_is_valid(mmc_controller->slots[0].switch_pin))
+	if (gpio_is_valid(mmc_controller->slots[0].switch_pin) &&
+		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
 		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
 					OMAP_PIN_INPUT_PULLUP);
-	if (gpio_is_valid(mmc_controller->slots[0].gpio_wp))
+	if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) &&
+		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
 		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
 					OMAP_PIN_INPUT_PULLUP);
 	if (cpu_is_omap34xx()) {
@@ -296,6 +312,7 @@
 	mmc->slots[0].name = hc_name;
 	mmc->nr_slots = 1;
 	mmc->slots[0].caps = c->caps;
+	mmc->slots[0].pm_caps = c->pm_caps;
 	mmc->slots[0].internal_clock = !c->ext_clock;
 	mmc->dma_mask = 0xffffffff;
 	if (cpu_is_omap44xx())
@@ -336,11 +353,17 @@
 	 *
 	 * temporary HACK: ocr_mask instead of fixed supply
 	 */
-	mmc->slots[0].ocr_mask = c->ocr_mask;
-
-	if (cpu_is_omap3517() || cpu_is_omap3505())
-		mmc->slots[0].set_power = nop_mmc_set_power;
+	if (cpu_is_omap3505() || cpu_is_omap3517())
+		mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+					 MMC_VDD_26_27 |
+					 MMC_VDD_27_28 |
+					 MMC_VDD_29_30 |
+					 MMC_VDD_30_31 |
+					 MMC_VDD_31_32;
 	else
+		mmc->slots[0].ocr_mask = c->ocr_mask;
+
+	if (!cpu_is_omap3517() && !cpu_is_omap3505())
 		mmc->slots[0].features |= HSMMC_HAS_PBIAS;
 
 	if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0))
@@ -363,6 +386,9 @@
 			}
 		}
 
+		if (cpu_is_omap3517() || cpu_is_omap3505())
+			mmc->slots[0].set_power = nop_mmc_set_power;
+
 		/* OMAP3630 HSMMC1 supports only 4-bit */
 		if (cpu_is_omap3630() &&
 				(c->caps & MMC_CAP_8_BIT_DATA)) {
@@ -372,6 +398,9 @@
 		}
 		break;
 	case 2:
+		if (cpu_is_omap3517() || cpu_is_omap3505())
+			mmc->slots[0].set_power = am35x_hsmmc2_set_power;
+
 		if (c->ext_clock)
 			c->transceiver = 1;
 		if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index f757e78..c440973 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -12,6 +12,7 @@
 	u8	mmc;		/* controller 1/2/3 */
 	u32	caps;		/* 4/8 wires and any additional host
 				 * capabilities OR'd (ref. linux/mmc/host.h) */
+	u32	pm_caps;	/* PM capabilities */
 	bool	transceiver;	/* MMC-2 option */
 	bool	ext_clock;	/* use external pin for input clock */
 	bool	cover_only;	/* No card detect - just cover switch */
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 7f8915a..5324e8d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -84,6 +84,8 @@
 static struct omap_hwmod omap3xxx_mcbsp5_hwmod;
 static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod;
 static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod;
+static struct omap_hwmod omap3xxx_usb_host_hs_hwmod;
+static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod;
 
 /* L3 -> L4_CORE interface */
 static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
@@ -164,6 +166,7 @@
 static struct omap_hwmod omap3xxx_uart2_hwmod;
 static struct omap_hwmod omap3xxx_uart3_hwmod;
 static struct omap_hwmod omap3xxx_uart4_hwmod;
+static struct omap_hwmod am35xx_uart4_hwmod;
 static struct omap_hwmod omap3xxx_usbhsotg_hwmod;
 
 /* l3_core -> usbhsotg interface */
@@ -299,6 +302,23 @@
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* AM35xx: L4 CORE -> UART4 interface */
+static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
+	{
+		.pa_start       = OMAP3_UART4_AM35XX_BASE,
+		.pa_end         = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
+		.flags          = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
+	.master         = &omap3xxx_l4_core_hwmod,
+	.slave          = &am35xx_uart4_hwmod,
+	.clk            = "uart4_ick",
+	.addr           = am35xx_uart4_addr_space,
+	.user           = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* L4 CORE -> I2C1 interface */
 static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
@@ -1162,6 +1182,7 @@
 			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
 			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.clockact	= CLOCKACT_TEST_ICLK,
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
 
@@ -1309,6 +1330,39 @@
 	.class		= &omap2_uart_class,
 };
 
+static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
+	{ .irq = INT_35XX_UART4_IRQ, },
+};
+
+static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
+	{ .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, },
+	{ .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
+};
+
+static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = {
+	&am35xx_l4_core__uart4,
+};
+
+static struct omap_hwmod am35xx_uart4_hwmod = {
+	.name           = "uart4",
+	.mpu_irqs       = am35xx_uart4_mpu_irqs,
+	.sdma_reqs      = am35xx_uart4_sdma_reqs,
+	.main_clk       = "uart4_fck",
+	.prcm           = {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_UART4_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
+		},
+	},
+	.slaves         = am35xx_uart4_slaves,
+	.slaves_cnt     = ARRAY_SIZE(am35xx_uart4_slaves),
+	.class          = &omap2_uart_class,
+};
+
+
 static struct omap_hwmod_class i2c_class = {
 	.name	= "i2c",
 	.sysc	= &i2c_sysc,
@@ -1636,7 +1690,7 @@
 
 static struct omap_hwmod omap3xxx_i2c1_hwmod = {
 	.name		= "i2c1",
-	.flags		= HWMOD_16BIT_REG,
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
 	.mpu_irqs	= omap2_i2c1_mpu_irqs,
 	.sdma_reqs	= omap2_i2c1_sdma_reqs,
 	.main_clk	= "i2c1_fck",
@@ -1670,7 +1724,7 @@
 
 static struct omap_hwmod omap3xxx_i2c2_hwmod = {
 	.name		= "i2c2",
-	.flags		= HWMOD_16BIT_REG,
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
 	.mpu_irqs	= omap2_i2c2_mpu_irqs,
 	.sdma_reqs	= omap2_i2c2_sdma_reqs,
 	.main_clk	= "i2c2_fck",
@@ -1715,7 +1769,7 @@
 
 static struct omap_hwmod omap3xxx_i2c3_hwmod = {
 	.name		= "i2c3",
-	.flags		= HWMOD_16BIT_REG,
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
 	.mpu_irqs	= i2c3_mpu_irqs,
 	.sdma_reqs	= i2c3_sdma_reqs,
 	.main_clk	= "i2c3_fck",
@@ -3072,7 +3126,35 @@
 	.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
 };
 
-static struct omap_hwmod omap3xxx_mmc1_hwmod = {
+/* See 35xx errata 2.1.1.128 in SPRZ278F */
+static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
+	.flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
+		  OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
+};
+
+static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
+	.name		= "mmc1",
+	.mpu_irqs	= omap34xx_mmc1_mpu_irqs,
+	.sdma_reqs	= omap34xx_mmc1_sdma_reqs,
+	.opt_clks	= omap34xx_mmc1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc1_opt_clks),
+	.main_clk	= "mmchs1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_MMC1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
+		},
+	},
+	.dev_attr	= &mmc1_pre_es3_dev_attr,
+	.slaves		= omap3xxx_mmc1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc1_slaves),
+	.class		= &omap34xx_mmc_class,
+};
+
+static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
 	.name		= "mmc1",
 	.mpu_irqs	= omap34xx_mmc1_mpu_irqs,
 	.sdma_reqs	= omap34xx_mmc1_sdma_reqs,
@@ -3115,7 +3197,34 @@
 	&omap3xxx_l4_core__mmc2,
 };
 
-static struct omap_hwmod omap3xxx_mmc2_hwmod = {
+/* See 35xx errata 2.1.1.128 in SPRZ278F */
+static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
+	.flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
+};
+
+static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
+	.name		= "mmc2",
+	.mpu_irqs	= omap34xx_mmc2_mpu_irqs,
+	.sdma_reqs	= omap34xx_mmc2_sdma_reqs,
+	.opt_clks	= omap34xx_mmc2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(omap34xx_mmc2_opt_clks),
+	.main_clk	= "mmchs2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_MMC2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
+		},
+	},
+	.dev_attr	= &mmc2_pre_es3_dev_attr,
+	.slaves		= omap3xxx_mmc2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_mmc2_slaves),
+	.class		= &omap34xx_mmc_class,
+};
+
+static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
 	.name		= "mmc2",
 	.mpu_irqs	= omap34xx_mmc2_mpu_irqs,
 	.sdma_reqs	= omap34xx_mmc2_sdma_reqs,
@@ -3177,13 +3286,223 @@
 	.class		= &omap34xx_mmc_class,
 };
 
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
+	.master		= &omap3xxx_usb_host_hs_hwmod,
+	.slave		= &omap3xxx_l3_main_hwmod,
+	.clk		= "core_l3_ick",
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
+	.name = "usb_host_hs",
+	.sysc = &omap3xxx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = {
+	&omap3xxx_usb_host_hs__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
+	{
+		.name		= "uhh",
+		.pa_start	= 0x48064000,
+		.pa_end		= 0x480643ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.name		= "ohci",
+		.pa_start	= 0x48064400,
+		.pa_end		= 0x480647ff,
+	},
+	{
+		.name		= "ehci",
+		.pa_start	= 0x48064800,
+		.pa_end		= 0x48064cff,
+	},
+	{}
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_usb_host_hs_hwmod,
+	.clk		= "usbhost_ick",
+	.addr		= omap3xxx_usb_host_hs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = {
+	&omap3xxx_l4_core__usb_host_hs,
+};
+
+static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
+	  { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
+};
+
+static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
+	{ .name = "ohci-irq", .irq = 76 },
+	{ .name = "ehci-irq", .irq = 77 },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
+	.name		= "usb_host_hs",
+	.class		= &omap3xxx_usb_host_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.mpu_irqs	= omap3xxx_usb_host_hs_irqs,
+	.main_clk	= "usbhost_48m_fck",
+	.prcm = {
+		.omap2 = {
+			.module_offs = OMAP3430ES2_USBHOST_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
+			.idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
+		},
+	},
+	.opt_clks	= omap3xxx_usb_host_hs_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
+	.slaves		= omap3xxx_usb_host_hs_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_slaves),
+	.masters	= omap3xxx_usb_host_hs_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_usb_host_hs_masters),
+
+	/*
+	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+	 * id: i660
+	 *
+	 * Description:
+	 * In the following configuration :
+	 * - USBHOST module is set to smart-idle mode
+	 * - PRCM asserts idle_req to the USBHOST module ( This typically
+	 *   happens when the system is going to a low power mode : all ports
+	 *   have been suspended, the master part of the USBHOST module has
+	 *   entered the standby state, and SW has cut the functional clocks)
+	 * - an USBHOST interrupt occurs before the module is able to answer
+	 *   idle_ack, typically a remote wakeup IRQ.
+	 * Then the USB HOST module will enter a deadlock situation where it
+	 * is no more accessible nor functional.
+	 *
+	 * Workaround:
+	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+	 */
+
+	/*
+	 * Errata: USB host EHCI may stall when entering smart-standby mode
+	 * Id: i571
+	 *
+	 * Description:
+	 * When the USBHOST module is set to smart-standby mode, and when it is
+	 * ready to enter the standby state (i.e. all ports are suspended and
+	 * all attached devices are in suspend mode), then it can wrongly assert
+	 * the Mstandby signal too early while there are still some residual OCP
+	 * transactions ongoing. If this condition occurs, the internal state
+	 * machine may go to an undefined state and the USB link may be stuck
+	 * upon the next resume.
+	 *
+	 * Workaround:
+	 * Don't use smart standby; use only force standby,
+	 * hence HWMOD_SWSUP_MSTANDBY
+	 */
+
+	/*
+	 * During system boot; If the hwmod framework resets the module
+	 * the module will have smart idle settings; which can lead to deadlock
+	 * (above Errata Id:i660); so, dont reset the module during boot;
+	 * Use HWMOD_INIT_NO_RESET.
+	 */
+
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+			  HWMOD_INIT_NO_RESET,
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
+	.name = "usb_tll_hs",
+	.sysc = &omap3xxx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
+	{ .name = "tll-irq", .irq = 78 },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = {
+	{
+		.name		= "tll",
+		.pa_start	= 0x48062000,
+		.pa_end		= 0x48062fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{}
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_usb_tll_hs_hwmod,
+	.clk		= "usbtll_ick",
+	.addr		= omap3xxx_usb_tll_hs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = {
+	&omap3xxx_l4_core__usb_tll_hs,
+};
+
+static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
+	.name		= "usb_tll_hs",
+	.class		= &omap3xxx_usb_tll_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.mpu_irqs	= omap3xxx_usb_tll_hs_irqs,
+	.main_clk	= "usbtll_fck",
+	.prcm = {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 3,
+			.module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
+			.idlest_reg_id = 3,
+			.idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_usb_tll_hs_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves),
+};
+
 static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_l3_main_hwmod,
 	&omap3xxx_l4_core_hwmod,
 	&omap3xxx_l4_per_hwmod,
 	&omap3xxx_l4_wkup_hwmod,
-	&omap3xxx_mmc1_hwmod,
-	&omap3xxx_mmc2_hwmod,
 	&omap3xxx_mmc3_hwmod,
 	&omap3xxx_mpu_hwmod,
 
@@ -3198,12 +3517,12 @@
 	&omap3xxx_timer9_hwmod,
 	&omap3xxx_timer10_hwmod,
 	&omap3xxx_timer11_hwmod,
-	&omap3xxx_timer12_hwmod,
 
 	&omap3xxx_wd_timer2_hwmod,
 	&omap3xxx_uart1_hwmod,
 	&omap3xxx_uart2_hwmod,
 	&omap3xxx_uart3_hwmod,
+
 	/* dss class */
 	&omap3xxx_dss_dispc_hwmod,
 	&omap3xxx_dss_dsi1_hwmod,
@@ -3245,20 +3564,38 @@
 	NULL,
 };
 
+/* GP-only hwmods */
+static __initdata struct omap_hwmod *omap3xxx_gp_hwmods[] = {
+	&omap3xxx_timer12_hwmod,
+	NULL
+};
+
 /* 3430ES1-only hwmods */
 static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
-	&omap3xxx_iva_hwmod,
 	&omap3430es1_dss_core_hwmod,
-	&omap3xxx_mailbox_hwmod,
 	NULL
 };
 
 /* 3430ES2+-only hwmods */
 static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
-	&omap3xxx_iva_hwmod,
 	&omap3xxx_dss_core_hwmod,
 	&omap3xxx_usbhsotg_hwmod,
-	&omap3xxx_mailbox_hwmod,
+	&omap3xxx_usb_host_hs_hwmod,
+	&omap3xxx_usb_tll_hs_hwmod,
+	NULL
+};
+
+/* <= 3430ES3-only hwmods */
+static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = {
+	&omap3xxx_pre_es3_mmc1_hwmod,
+	&omap3xxx_pre_es3_mmc2_hwmod,
+	NULL
+};
+
+/* 3430ES3+-only hwmods */
+static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = {
+	&omap3xxx_es3plus_mmc1_hwmod,
+	&omap3xxx_es3plus_mmc2_hwmod,
 	NULL
 };
 
@@ -3280,12 +3617,21 @@
 	&omap36xx_sr2_hwmod,
 	&omap3xxx_usbhsotg_hwmod,
 	&omap3xxx_mailbox_hwmod,
+	&omap3xxx_usb_host_hs_hwmod,
+	&omap3xxx_usb_tll_hs_hwmod,
+	&omap3xxx_es3plus_mmc1_hwmod,
+	&omap3xxx_es3plus_mmc2_hwmod,
 	NULL
 };
 
 static __initdata struct omap_hwmod *am35xx_hwmods[] = {
 	&omap3xxx_dss_core_hwmod, /* XXX ??? */
 	&am35xx_usbhsotg_hwmod,
+	&am35xx_uart4_hwmod,
+	&omap3xxx_usb_host_hs_hwmod,
+	&omap3xxx_usb_tll_hs_hwmod,
+	&omap3xxx_es3plus_mmc1_hwmod,
+	&omap3xxx_es3plus_mmc2_hwmod,
 	NULL
 };
 
@@ -3300,6 +3646,13 @@
 	if (r < 0)
 		return r;
 
+	/* Register GP-only hwmods. */
+	if (omap_type() == OMAP2_DEVICE_TYPE_GP) {
+		r = omap_hwmod_register(omap3xxx_gp_hwmods);
+		if (r < 0)
+			return r;
+	}
+
 	rev = omap_rev();
 
 	/*
@@ -3338,6 +3691,21 @@
 		h = omap3430es2plus_hwmods;
 	};
 
+	if (h) {
+		r = omap_hwmod_register(h);
+		if (r < 0)
+			return r;
+	}
+
+	h = NULL;
+	if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
+	    rev == OMAP3430_REV_ES2_1) {
+		h = omap3430_pre_es3_hwmods;
+	} else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
+		   rev == OMAP3430_REV_ES3_1_2) {
+		h = omap3430_es3plus_hwmods;
+	};
+
 	if (h)
 		r = omap_hwmod_register(h);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index daaf165..f9f1510 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -70,6 +70,8 @@
 static struct omap_hwmod omap44xx_mpu_hwmod;
 static struct omap_hwmod omap44xx_mpu_private_hwmod;
 static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
 
 /*
  * Interconnects omap_hwmod structures
@@ -2246,6 +2248,7 @@
 			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP),
+	.clockact	= CLOCKACT_TEST_ICLK,
 	.sysc_fields	= &omap_hwmod_sysc_type1,
 };
 
@@ -2300,7 +2303,7 @@
 	.name		= "i2c1",
 	.class		= &omap44xx_i2c_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_16BIT_REG,
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
 	.mpu_irqs	= omap44xx_i2c1_irqs,
 	.sdma_reqs	= omap44xx_i2c1_sdma_reqs,
 	.main_clk	= "i2c1_fck",
@@ -2356,7 +2359,7 @@
 	.name		= "i2c2",
 	.class		= &omap44xx_i2c_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_16BIT_REG,
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
 	.mpu_irqs	= omap44xx_i2c2_irqs,
 	.sdma_reqs	= omap44xx_i2c2_sdma_reqs,
 	.main_clk	= "i2c2_fck",
@@ -2412,7 +2415,7 @@
 	.name		= "i2c3",
 	.class		= &omap44xx_i2c_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_16BIT_REG,
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
 	.mpu_irqs	= omap44xx_i2c3_irqs,
 	.sdma_reqs	= omap44xx_i2c3_sdma_reqs,
 	.main_clk	= "i2c3_fck",
@@ -2468,7 +2471,7 @@
 	.name		= "i2c4",
 	.class		= &omap44xx_i2c_hwmod_class,
 	.clkdm_name	= "l4_per_clkdm",
-	.flags		= HWMOD_16BIT_REG,
+	.flags		= HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
 	.mpu_irqs	= omap44xx_i2c4_irqs,
 	.sdma_reqs	= omap44xx_i2c4_sdma_reqs,
 	.main_clk	= "i2c4_fck",
@@ -5276,6 +5279,207 @@
 	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_slaves),
 };
 
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
+	.master		= &omap44xx_usb_host_hs_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
+	.name = "usb_host_hs",
+	.sysc = &omap44xx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
+	&omap44xx_usb_host_hs__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
+	{
+		.name		= "uhh",
+		.pa_start	= 0x4a064000,
+		.pa_end		= 0x4a0647ff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{
+		.name		= "ohci",
+		.pa_start	= 0x4a064800,
+		.pa_end		= 0x4a064bff,
+	},
+	{
+		.name		= "ehci",
+		.pa_start	= 0x4a064c00,
+		.pa_end		= 0x4a064fff,
+	},
+	{}
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
+	{ .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_usb_host_hs_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_usb_host_hs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
+	&omap44xx_l4_cfg__usb_host_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
+	.name		= "usb_host_hs",
+	.class		= &omap44xx_usb_host_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.main_clk	= "usb_host_hs_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_SWCTRL,
+		},
+	},
+	.mpu_irqs	= omap44xx_usb_host_hs_irqs,
+	.slaves		= omap44xx_usb_host_hs_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
+	.masters	= omap44xx_usb_host_hs_masters,
+	.masters_cnt	= ARRAY_SIZE(omap44xx_usb_host_hs_masters),
+
+	/*
+	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+	 * id: i660
+	 *
+	 * Description:
+	 * In the following configuration :
+	 * - USBHOST module is set to smart-idle mode
+	 * - PRCM asserts idle_req to the USBHOST module ( This typically
+	 *   happens when the system is going to a low power mode : all ports
+	 *   have been suspended, the master part of the USBHOST module has
+	 *   entered the standby state, and SW has cut the functional clocks)
+	 * - an USBHOST interrupt occurs before the module is able to answer
+	 *   idle_ack, typically a remote wakeup IRQ.
+	 * Then the USB HOST module will enter a deadlock situation where it
+	 * is no more accessible nor functional.
+	 *
+	 * Workaround:
+	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+	 */
+
+	/*
+	 * Errata: USB host EHCI may stall when entering smart-standby mode
+	 * Id: i571
+	 *
+	 * Description:
+	 * When the USBHOST module is set to smart-standby mode, and when it is
+	 * ready to enter the standby state (i.e. all ports are suspended and
+	 * all attached devices are in suspend mode), then it can wrongly assert
+	 * the Mstandby signal too early while there are still some residual OCP
+	 * transactions ongoing. If this condition occurs, the internal state
+	 * machine may go to an undefined state and the USB link may be stuck
+	 * upon the next resume.
+	 *
+	 * Workaround:
+	 * Don't use smart standby; use only force standby,
+	 * hence HWMOD_SWSUP_MSTANDBY
+	 */
+
+	/*
+	 * During system boot; If the hwmod framework resets the module
+	 * the module will have smart idle settings; which can lead to deadlock
+	 * (above Errata Id:i660); so, dont reset the module during boot;
+	 * Use HWMOD_INIT_NO_RESET.
+	 */
+
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+			  HWMOD_INIT_NO_RESET,
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
+	.name = "usb_tll_hs",
+	.sysc = &omap44xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
+	{ .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
+	{ .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
+	{
+		.name		= "tll",
+		.pa_start	= 0x4a062000,
+		.pa_end		= 0x4a063fff,
+		.flags		= ADDR_TYPE_RT
+	},
+	{}
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_usb_tll_hs_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_usb_tll_hs_addrs,
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
+	&omap44xx_l4_cfg__usb_tll_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
+	.name		= "usb_tll_hs",
+	.class		= &omap44xx_usb_tll_hs_hwmod_class,
+	.clkdm_name	= "l3_init_clkdm",
+	.main_clk	= "usb_tll_hs_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
+			.context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
+			.modulemode   = MODULEMODE_HWCTRL,
+		},
+	},
+	.mpu_irqs	= omap44xx_usb_tll_hs_irqs,
+	.slaves		= omap44xx_usb_tll_hs_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
+};
+
 static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 
 	/* dmm class */
@@ -5415,13 +5619,16 @@
 	&omap44xx_uart3_hwmod,
 	&omap44xx_uart4_hwmod,
 
+	/* usb host class */
+	&omap44xx_usb_host_hs_hwmod,
+	&omap44xx_usb_tll_hs_hwmod,
+
 	/* usb_otg_hs class */
 	&omap44xx_usb_otg_hs_hwmod,
 
 	/* wd_timer class */
 	&omap44xx_wd_timer2_hwmod,
 	&omap44xx_wd_timer3_hwmod,
-
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 0363dcb..da2d80f 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -201,6 +201,8 @@
 #define OMAP3430_EN_MMC2_SHIFT				25
 #define OMAP3430_EN_MMC1_MASK				(1 << 24)
 #define OMAP3430_EN_MMC1_SHIFT				24
+#define OMAP3430_EN_UART4_MASK				(1 << 23)
+#define OMAP3430_EN_UART4_SHIFT				23
 #define OMAP3430_EN_MCSPI4_MASK				(1 << 21)
 #define OMAP3430_EN_MCSPI4_SHIFT			21
 #define OMAP3430_EN_MCSPI3_MASK				(1 << 20)
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 89ae298..771dc78 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -28,51 +28,28 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <plat/usb.h>
+#include <plat/omap_device.h>
 
 #include "mux.h"
 
 #ifdef CONFIG_MFD_OMAP_USB_HOST
 
-#define OMAP_USBHS_DEVICE	"usbhs-omap"
-
-static struct resource usbhs_resources[] = {
-	{
-		.name	= "uhh",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "tll",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ehci",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ehci-irq",
-		.flags	= IORESOURCE_IRQ,
-	},
-	{
-		.name	= "ohci",
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.name	= "ohci-irq",
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device usbhs_device = {
-	.name		= OMAP_USBHS_DEVICE,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(usbhs_resources),
-	.resource	= usbhs_resources,
-};
+#define OMAP_USBHS_DEVICE	"usbhs_omap"
+#define	USBHS_UHH_HWMODNAME	"usb_host_hs"
+#define USBHS_TLL_HWMODNAME	"usb_tll_hs"
 
 static struct usbhs_omap_platform_data		usbhs_data;
 static struct ehci_hcd_omap_platform_data	ehci_data;
 static struct ohci_hcd_omap_platform_data	ohci_data;
 
+static struct omap_device_pm_latency omap_uhhtll_latency[] = {
+	  {
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func	 = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	  },
+};
+
 /* MUX settings for EHCI pins */
 /*
  * setup_ehci_io_mux - initialize IO pad mux for USBHOST
@@ -508,7 +485,10 @@
 
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
-	int	i;
+	struct omap_hwmod	*oh[2];
+	struct omap_device	*od;
+	int			bus_id = -1;
+	int			i;
 
 	for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
 		usbhs_data.port_mode[i] = pdata->port_mode[i];
@@ -523,44 +503,34 @@
 	usbhs_data.ohci_data = &ohci_data;
 
 	if (cpu_is_omap34xx()) {
-		usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE;
-		usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
-		usbhs_resources[1].start = OMAP34XX_USBTLL_BASE;
-		usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1;
-		usbhs_resources[2].start	= OMAP34XX_EHCI_BASE;
-		usbhs_resources[2].end	= OMAP34XX_EHCI_BASE + SZ_1K - 1;
-		usbhs_resources[3].start = INT_34XX_EHCI_IRQ;
-		usbhs_resources[4].start	= OMAP34XX_OHCI_BASE;
-		usbhs_resources[4].end	= OMAP34XX_OHCI_BASE + SZ_1K - 1;
-		usbhs_resources[5].start = INT_34XX_OHCI_IRQ;
 		setup_ehci_io_mux(pdata->port_mode);
 		setup_ohci_io_mux(pdata->port_mode);
 	} else if (cpu_is_omap44xx()) {
-		usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE;
-		usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1;
-		usbhs_resources[1].start = OMAP44XX_USBTLL_BASE;
-		usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1;
-		usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE;
-		usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
-		usbhs_resources[3].start = OMAP44XX_IRQ_EHCI;
-		usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE;
-		usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1;
-		usbhs_resources[5].start = OMAP44XX_IRQ_OHCI;
 		setup_4430ehci_io_mux(pdata->port_mode);
 		setup_4430ohci_io_mux(pdata->port_mode);
 	}
 
-	if (platform_device_add_data(&usbhs_device,
-				&usbhs_data, sizeof(usbhs_data)) < 0) {
-		printk(KERN_ERR "USBHS platform_device_add_data failed\n");
-		goto init_end;
+	oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
+	if (!oh[0]) {
+		pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
+		return;
 	}
 
-	if (platform_device_register(&usbhs_device) < 0)
-		printk(KERN_ERR "USBHS platform_device_register failed\n");
+	oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
+	if (!oh[1]) {
+		pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
+		return;
+	}
 
-init_end:
-	return;
+	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+				(void *)&usbhs_data, sizeof(usbhs_data),
+				omap_uhhtll_latency,
+				ARRAY_SIZE(omap_uhhtll_latency), false);
+	if (IS_ERR(od)) {
+		pr_err("Could not build hwmod devices %s,%s\n",
+			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
+		return;
+	}
 }
 
 #else
@@ -570,5 +540,3 @@
 }
 
 #endif
-
-
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 4cb069f..ccdac4b 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -138,7 +138,7 @@
 {
 	int i;
 
-	free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
 
 	for (i = 0; i < ARRAY_SIZE(gpios); i++)
 		gpio_free(gpios[i]);
@@ -292,7 +292,7 @@
 {
 	int ret;
 
-	ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq,
 				IRQF_DISABLED|IRQF_TRIGGER_FALLING,
 				"AM200", info->par);
 	if (ret)
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index fa8bad2..76c4b94 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -176,7 +176,7 @@
 {
 	int i;
 
-	free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+	free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
 
 	for (i = 0; i < ARRAY_SIZE(gpios); i++)
 		gpio_free(gpios[i]);
@@ -240,7 +240,7 @@
 	int ret;
 	struct broadsheetfb_par *par = info->par;
 
-	ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
+	ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
 				IRQF_DISABLED|IRQF_TRIGGER_RISING,
 				"AM300", par);
 	if (ret)
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 4b81f59..11f2223 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -179,7 +179,7 @@
 };
 
 static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+	.irq		= PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
 };
 
 
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4efc16d..5516317 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -50,8 +50,8 @@
 	       .flags = IORESOURCE_MEM
 	},
 	[2] = {
-	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
-	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
+	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
 	       .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
 	}
 };
@@ -80,7 +80,7 @@
 static struct plat_serial8250_port ti16c752_platform_data[] = {
 	[0] = {
 	       .mapbase = 0x14000000,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
@@ -89,7 +89,7 @@
 	},
 	[1] = {
 	       .mapbase = 0x14000040,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
@@ -98,7 +98,7 @@
 	},
 	[2] = {
 	       .mapbase = 0x14000080,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
@@ -107,7 +107,7 @@
 	},
 	[3] = {
 	       .mapbase = 0x140000c0,
-	       .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+	       .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
 	       .irqflags = IRQF_TRIGGER_RISING,
 	       .flags = TI16C752_FLAGS,
 	       .iotype = UPIO_MEM,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 13518a7..431ef56 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -33,7 +33,7 @@
 /* GPIO IRQ usage */
 #define GPIO83_MMC_IRQ		(83)
 
-#define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ)
 
 /* MMC power enable */
 #define GPIO105_MMC_POWER	(105)
@@ -380,7 +380,7 @@
 		.modalias		= "libertas_spi",
 		.max_speed_hz		= 13000000,
 		.bus_num		= 2,
-		.irq			= gpio_to_irq(95),
+		.irq			= PXA_GPIO_TO_IRQ(95),
 		.chip_select		= 0,
 		.controller_data	= &cm_x270_libertas_chip,
 		.platform_data		= &cm_x270_libertas_pdata,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index f2e4190..9344a0e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -58,8 +58,8 @@
 #define CMX255_GPIO_IT8152_IRQ	(0)
 #define CMX270_GPIO_IT8152_IRQ	(22)
 
-#define CMX255_ETHIRQ		IRQ_GPIO(GPIO22_ETHIRQ)
-#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX255_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ)
+#define CMX270_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ)
 
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 static struct resource cmx255_dm9000_resource[] = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index e096bba..684acf6 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -64,7 +64,7 @@
 #define GPIO82_MMC_IRQ		(82)
 #define GPIO85_MMC_WP		(85)
 
-#define	CM_X300_MMC_IRQ		IRQ_GPIO(GPIO82_MMC_IRQ)
+#define	CM_X300_MMC_IRQ		PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
 
 #define GPIO95_RTC_CS		(95)
 #define GPIO96_RTC_WR		(96)
@@ -229,8 +229,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
-		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
-		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 05bfa1b..f0fe9a5 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -218,8 +218,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
-		.end	= gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.start	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
 	},
 };
@@ -249,7 +249,7 @@
 };
 
 static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
-	.irq		= gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+	.irq		= PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
 };
 
 static struct platform_device colibri_pxa270_ucb1400_device = {
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index c825e8b..0a6222e 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -78,8 +78,8 @@
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
-		.end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
 		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
 	}
 };
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d23b92b..56ab7a6 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -115,8 +115,8 @@
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
-		.end   = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
 		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
 	}
 };
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 549468d..3812ba0 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -531,7 +531,7 @@
 		.chip_select	= 0,
 		.platform_data	= &corgi_ads7846_info,
 		.controller_data= &corgi_ads7846_chip,
-		.irq		= gpio_to_irq(CORGI_GPIO_TP_INT),
+		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
 	}, {
 		.modalias	= "corgi-lcd",
 		.max_speed_hz	= 50000,
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 2903477..39e265c 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
@@ -40,7 +41,9 @@
 	{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
 	{ CORGI_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
 	{ CORGI_GPIO_CHRG_UKN,	  GPIOF_OUT_INIT_LOW, "Charger Unknown" },
+	{ CORGI_GPIO_AC_IN,	  GPIOF_IN, "Charger Detection" },
 	{ CORGI_GPIO_KEY_INT,	  GPIOF_IN, "Key Interrupt" },
+	{ CORGI_GPIO_WAKEUP,	  GPIOF_IN, "System wakeup notification" },
 };
 
 static void corgi_charger_init(void)
@@ -90,7 +93,12 @@
 {
 	int is_resume = 0;
 
-	dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR);
+	dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
+		"GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
+		PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
+		gpio_get_value(CORGI_GPIO_CHRG_FULL),
+		gpio_get_value(CORGI_GPIO_KEY_INT),
+		gpio_get_value(CORGI_GPIO_WAKEUP));
 
 	if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
 		if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
@@ -124,14 +132,21 @@
 
 static unsigned long corgi_charger_wakeup(void)
 {
-	return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) );
+	unsigned long ret;
+
+	ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
+		| (!gpio_get_value(CORGI_GPIO_KEY_INT)
+		<< GPIO_bit(CORGI_GPIO_KEY_INT))
+		| (!gpio_get_value(CORGI_GPIO_WAKEUP)
+		<< GPIO_bit(CORGI_GPIO_WAKEUP));
+	return ret;
 }
 
 unsigned long corgipm_read_devdata(int type)
 {
 	switch(type) {
 	case SHARPSL_STATUS_ACIN:
-		return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
+		return !gpio_get_value(CORGI_GPIO_AC_IN);
 	case SHARPSL_STATUS_LOCK:
 		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
 	case SHARPSL_STATUS_CHRGFULL:
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 2e04254..5bc1312 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -1051,6 +1051,36 @@
 };
 #endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
 
+struct resource pxa_resource_gpio[] = {
+	{
+		.start	= 0x40e00000,
+		.end	= 0x40e0ffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_GPIO0,
+		.end	= IRQ_GPIO0,
+		.name	= "gpio0",
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_GPIO1,
+		.end	= IRQ_GPIO1,
+		.name	= "gpio1",
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.start	= IRQ_GPIO_2_x,
+		.end	= IRQ_GPIO_2_x,
+		.name	= "gpio_mux",
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa_device_gpio = {
+	.name		= "pxa-gpio",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa_resource_gpio),
+	.resource	= pxa_resource_gpio,
+};
+
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
  * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
 void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 2fd5a8b..1475db1 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -16,6 +16,7 @@
 extern struct platform_device sa1100_device_rtc;
 extern struct platform_device pxa_device_rtc;
 extern struct platform_device pxa_device_ac97;
+extern struct platform_device pxa_device_gpio;
 
 extern struct platform_device pxa27x_device_i2c_power;
 extern struct platform_device pxa27x_device_ohci;
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 94acc0b..3358f4d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -70,7 +70,7 @@
 /* common  GPIOs */
 #define GPIO11_NAND_CS		(11)
 #define GPIO41_ETHIRQ		(41)
-#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_ETHIRQ		PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
 #define GPIO115_WLAN_PWEN	(115)
 #define GPIO19_WLAN_STRAP	(19)
 #define GPIO9_USB_VBUS_EN	(9)
@@ -805,7 +805,7 @@
 		.modalias		= "libertas_spi",
 		.max_speed_hz		= 13000000,
 		.bus_num		= 2,
-		.irq			= IRQ_GPIO(116),
+		.irq			= PXA_GPIO_TO_IRQ(116),
 		.chip_select		= 0,
 		.controller_data	= &em_x270_libertas_chip,
 		.platform_data		= &em_x270_libertas_pdata,
@@ -1203,7 +1203,7 @@
 
 static struct i2c_board_info em_x270_i2c_pmic_info = {
 	I2C_BOARD_INFO("da9030", 0x49),
-	.irq = IRQ_GPIO(0),
+	.irq = PXA_GPIO_TO_IRQ(0),
 	.platform_data = &em_x270_da9030_info,
 };
 
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index d82b7aa..e556a1e 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -119,8 +119,8 @@
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
-		.end    = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+		.start  = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
+		.end    = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
 		.flags  = IORESOURCE_IRQ,
 	},
 };
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6f6368e..82e9976 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -252,8 +252,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
-		.end	= gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+		.start	= PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
 		.flags	= IORESOURCE_IRQ,
 	},
 	/* SD part */
@@ -263,8 +263,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[3] = {
-		.start	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
-		.end	= gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.start	= PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -587,7 +587,7 @@
 		.modalias        = "ads7846",
 		.bus_num         = 2,
 		.max_speed_hz    = 2600000, /* 100 kHz sample rate */
-		.irq             = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+		.irq             = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
 		.platform_data   = &tsc2046_info,
 		.controller_data = &tsc2046_chip,
 	},
@@ -635,15 +635,15 @@
 		.name  = "ac",
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 		         IORESOURCE_IRQ_LOWEDGE,
-		.start = gpio_to_irq(GPIOD9_nAC_IN),
-		.end   = gpio_to_irq(GPIOD9_nAC_IN),
+		.start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
+		.end   = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
 	},
 	[1] = {
 		.name  = "usb",
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 		         IORESOURCE_IRQ_LOWEDGE,
-		.start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
-		.end   = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+		.start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
+		.end   = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index f78d5db..33e81e8 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -86,7 +86,7 @@
 		.chip_select     = 0,
 		.platform_data   = &mcp251x_info,
 		.controller_data = &mcp251x_chip_info1,
-		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
 	},
 	{
 		.modalias        = "mcp2515",
@@ -95,7 +95,7 @@
 		.chip_select     = 1,
 		.platform_data   = &mcp251x_info,
 		.controller_data = &mcp251x_chip_info2,
-		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
 	},
 	{
 		.modalias        = "mcp2515",
@@ -104,7 +104,7 @@
 		.chip_select     = 0,
 		.platform_data   = &mcp251x_info,
 		.controller_data = &mcp251x_chip_info3,
-		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
 	},
 	{
 		.modalias        = "mcp2515",
@@ -113,7 +113,7 @@
 		.chip_select     = 1,
 		.platform_data   = &mcp251x_info,
 		.controller_data = &mcp251x_chip_info4,
-		.irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
+		.irq             = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
 	}
 };
 
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ddf20e5..bb98ff5 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -75,8 +75,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_GPIO(4),
-		.end	= IRQ_GPIO(4),
+		.start	= PXA_GPIO_TO_IRQ(4),
+		.end	= PXA_GPIO_TO_IRQ(4),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 6d7eab3..f02fa1e 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -172,9 +172,9 @@
 /* Balloon3 Interrupts */
 #define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
 
-#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
-#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+#define BALLOON3_AUX_NIRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ	PXA_GPIO_TO_IRQ(BALLOON3_GPIO_S0_CD)
 
 #define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 16)
 
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 5dfd119..f3c3493 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -66,18 +66,18 @@
 /*
  * Corgi Interrupts
  */
-#define CORGI_IRQ_GPIO_KEY_INT		IRQ_GPIO(0)
-#define CORGI_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
-#define CORGI_IRQ_GPIO_WAKEUP		IRQ_GPIO(3)
-#define CORGI_IRQ_GPIO_AK_INT		IRQ_GPIO(4)
-#define CORGI_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
-#define CORGI_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
-#define CORGI_IRQ_GPIO_nSD_INT		IRQ_GPIO(10)
-#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(11)
-#define CORGI_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
-#define CORGI_IRQ_GPIO_CHRG_FULL	IRQ_GPIO(16)	/* Battery fully charged */
-#define CORGI_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
-#define CORGI_IRQ_GPIO_KEY_SENSE(a)	IRQ_GPIO(58+(a))	/* Keyboard Sense lines */
+#define CORGI_IRQ_GPIO_KEY_INT		PXA_GPIO_TO_IRQ(0)
+#define CORGI_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
+#define CORGI_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(3)
+#define CORGI_IRQ_GPIO_AK_INT		PXA_GPIO_TO_IRQ(4)
+#define CORGI_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
+#define CORGI_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
+#define CORGI_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(10)
+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(11)
+#define CORGI_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
+#define CORGI_IRQ_GPIO_CHRG_FULL	PXA_GPIO_TO_IRQ(16)	/* Battery fully charged */
+#define CORGI_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
+#define CORGI_IRQ_GPIO_KEY_SENSE(a)	PXA_GPIO_TO_IRQ(58+(a))	/* Keyboard Sense lines */
 
 
 /*
@@ -98,7 +98,7 @@
 			CORGI_SCP_MIC_BIAS )
 #define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
 
-#define CORGI_SCOOP_GPIO_BASE		(NR_BUILTIN_GPIO)
+#define CORGI_SCOOP_GPIO_BASE		(PXA_NR_BUILTIN_GPIO)
 #define CORGI_GPIO_LED_GREEN		(CORGI_SCOOP_GPIO_BASE + 0)
 #define CORGI_GPIO_SWA			(CORGI_SCOOP_GPIO_BASE + 1)  /* Hinge Switch A */
 #define CORGI_GPIO_SWB			(CORGI_SCOOP_GPIO_BASE + 2)  /* Hinge Switch B */
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h
index 747ab1a..2628e7b 100644
--- a/arch/arm/mach-pxa/include/mach/csb726.h
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@@ -19,8 +19,8 @@
 #define CSB726_FLASH_SIZE	(64 * 1024 * 1024)
 #define CSB726_FLASH_uMON	(8 * 1024 * 1024)
 
-#define CSB726_IRQ_LAN		gpio_to_irq(CSB726_GPIO_IRQ_LAN)
-#define CSB726_IRQ_SM501	gpio_to_irq(CSB726_GPIO_IRQ_SM501)
+#define CSB726_IRQ_LAN		PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501	PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
 
 #endif
 
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
deleted file mode 100644
index 41b4c93..0000000
--- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __MACH_PXA_GPIO_PXA_H
-#define __MACH_PXA_GPIO_PXA_H
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#define GPIO_REGS_VIRT	io_p2v(0x40E00000)
-
-#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-/* GPIO Pin Level Registers */
-#define GPLR0		GPIO_REG(BANK_OFF(0) + 0x00)
-#define GPLR1		GPIO_REG(BANK_OFF(1) + 0x00)
-#define GPLR2		GPIO_REG(BANK_OFF(2) + 0x00)
-#define GPLR3		GPIO_REG(BANK_OFF(3) + 0x00)
-
-/* GPIO Pin Direction Registers */
-#define GPDR0		GPIO_REG(BANK_OFF(0) + 0x0c)
-#define GPDR1		GPIO_REG(BANK_OFF(1) + 0x0c)
-#define GPDR2		GPIO_REG(BANK_OFF(2) + 0x0c)
-#define GPDR3		GPIO_REG(BANK_OFF(3) + 0x0c)
-
-/* GPIO Pin Output Set Registers */
-#define GPSR0		GPIO_REG(BANK_OFF(0) + 0x18)
-#define GPSR1		GPIO_REG(BANK_OFF(1) + 0x18)
-#define GPSR2		GPIO_REG(BANK_OFF(2) + 0x18)
-#define GPSR3		GPIO_REG(BANK_OFF(3) + 0x18)
-
-/* GPIO Pin Output Clear Registers */
-#define GPCR0		GPIO_REG(BANK_OFF(0) + 0x24)
-#define GPCR1		GPIO_REG(BANK_OFF(1) + 0x24)
-#define GPCR2		GPIO_REG(BANK_OFF(2) + 0x24)
-#define GPCR3		GPIO_REG(BANK_OFF(3) + 0x24)
-
-/* GPIO Rising Edge Detect Registers */
-#define GRER0		GPIO_REG(BANK_OFF(0) + 0x30)
-#define GRER1		GPIO_REG(BANK_OFF(1) + 0x30)
-#define GRER2		GPIO_REG(BANK_OFF(2) + 0x30)
-#define GRER3		GPIO_REG(BANK_OFF(3) + 0x30)
-
-/* GPIO Falling Edge Detect Registers */
-#define GFER0		GPIO_REG(BANK_OFF(0) + 0x3c)
-#define GFER1		GPIO_REG(BANK_OFF(1) + 0x3c)
-#define GFER2		GPIO_REG(BANK_OFF(2) + 0x3c)
-#define GFER3		GPIO_REG(BANK_OFF(3) + 0x3c)
-
-/* GPIO Edge Detect Status Registers */
-#define GEDR0		GPIO_REG(BANK_OFF(0) + 0x48)
-#define GEDR1		GPIO_REG(BANK_OFF(1) + 0x48)
-#define GEDR2		GPIO_REG(BANK_OFF(2) + 0x48)
-#define GEDR3		GPIO_REG(BANK_OFF(3) + 0x48)
-
-/* GPIO Alternate Function Select Registers */
-#define GAFR0_L		GPIO_REG(0x0054)
-#define GAFR0_U		GPIO_REG(0x0058)
-#define GAFR1_L		GPIO_REG(0x005C)
-#define GAFR1_U		GPIO_REG(0x0060)
-#define GAFR2_L		GPIO_REG(0x0064)
-#define GAFR2_U		GPIO_REG(0x0068)
-#define GAFR3_L		GPIO_REG(0x006C)
-#define GAFR3_U		GPIO_REG(0x0070)
-
-/* More handy macros.  The argument is a literal GPIO number. */
-
-#define GPIO_bit(x)	(1 << ((x) & 0x1f))
-
-#define GPLR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
-#define GPDR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
-#define GPSR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
-#define GPCR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
-#define GRER(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
-#define GFER(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
-#define GEDR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
-#define GAFR(x)		GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-
-
-#define NR_BUILTIN_GPIO		PXA_GPIO_IRQ_NUM
-
-#define gpio_to_bank(gpio)	((gpio) >> 5)
-
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static inline int __gpio_is_inverted(unsigned gpio)
-{
-	return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
-#endif
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static inline int __gpio_is_occupied(unsigned gpio)
-{
-	if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
-		int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
-		int dir = GPDR(gpio) & GPIO_bit(gpio);
-
-		if (__gpio_is_inverted(gpio))
-			return af != 1 || dir == 0;
-		else
-			return af != 0 || dir != 0;
-	} else
-		return GPDR(gpio) & GPIO_bit(gpio);
-}
-
-#include <plat/gpio-pxa.h>
-#endif /* __MACH_PXA_GPIO_PXA_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 004cade..0248e43 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -25,24 +25,8 @@
 #define __ASM_ARCH_PXA_GPIO_H
 
 #include <asm-generic/gpio.h>
-/* The defines for the driver are needed for the accelerated accessors */
-#include "gpio-pxa.h"
 
-#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
+#include <mach/irqs.h>
+#include <mach/hardware.h>
 
-static inline int irq_to_gpio(unsigned int irq)
-{
-	int gpio;
-
-	if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1)
-		return irq - IRQ_GPIO0;
-
-	gpio = irq - PXA_GPIO_IRQ_BASE;
-	if (gpio >= 2 && gpio < NR_BUILTIN_GPIO)
-		return gpio;
-
-	return -1;
-}
-
-#include <plat/gpio.h>
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 9b89868..dba14b6 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -24,7 +24,7 @@
 #define GPIO_GUMSTIX_USB_GPIOx		41
 
 /* usb state change */
-#define GUMSTIX_USB_INTR_IRQ		IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+#define GUMSTIX_USB_INTR_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn)
 
 #define GPIO_GUMSTIX_USB_GPIOn_MD	(GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
 #define GPIO_GUMSTIX_USB_GPIOx_CON_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
@@ -35,7 +35,7 @@
  */
 #define GUMSTIX_GPIO_nSD_WP		22 /* SD Write Protect */
 #define GUMSTIX_GPIO_nSD_DETECT		11 /* MMC/SD Card Detect */
-#define GUMSTIX_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT)
 
 /*
  * SMC Ethernet definitions
@@ -49,10 +49,10 @@
 
 #define GPIO_GUMSTIX_ETH0		36
 #define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
-#define GUMSTIX_ETH0_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GUMSTIX_ETH0_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
 #define GPIO_GUMSTIX_ETH1		27
 #define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
-#define GUMSTIX_ETH1_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+#define GUMSTIX_ETH1_IRQ		PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
 
 
 /* CF reset line */
@@ -63,18 +63,18 @@
 #define GPIO4_nSTSCHG			GPIO4_nBVD1
 #define GPIO11_nCD			11
 #define GPIO26_PRDY_nBSY		26
-#define GUMSTIX_S0_nSTSCHG_IRQ		IRQ_GPIO(GPIO4_nSTSCHG)
-#define GUMSTIX_S0_nCD_IRQ		IRQ_GPIO(GPIO11_nCD)
-#define GUMSTIX_S0_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO26_PRDY_nBSY)
+#define GUMSTIX_S0_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY)
 
 /* CF slot 1 */
 #define GPIO18_nBVD1			18
 #define GPIO18_nSTSCHG			GPIO18_nBVD1
 #define GPIO36_nCD			36
 #define GPIO27_PRDY_nBSY		27
-#define GUMSTIX_S1_nSTSCHG_IRQ		IRQ_GPIO(GPIO18_nSTSCHG)
-#define GUMSTIX_S1_nCD_IRQ		IRQ_GPIO(GPIO36_nCD)
-#define GUMSTIX_S1_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO27_PRDY_nBSY)
+#define GUMSTIX_S1_nSTSCHG_IRQ		PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ		PXA_GPIO_TO_IRQ(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ	PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY)
 
 /* CF GPIO line modes */
 #define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 3740844..8bc0291 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -15,7 +15,7 @@
 #include <linux/gpio.h>
 #include <linux/mfd/asic3.h>
 
-#define HX4700_ASIC3_GPIO_BASE	NR_BUILTIN_GPIO
+#define HX4700_ASIC3_GPIO_BASE	PXA_NR_BUILTIN_GPIO
 #define HX4700_EGPIO_BASE	(HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
 #define HX4700_NR_IRQS		(IRQ_BOARD_START + 70)
 
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
index 5eff96f..22a96f8 100644
--- a/arch/arm/mach-pxa/include/mach/idp.h
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -131,28 +131,26 @@
 #define PCC_VS2		(1 << 1)
 #define PCC_VS1		(1 << 0)
 
-#define PCC_DETECT(x)	(GPLR(7 + (x)) & GPIO_bit(7 + (x)))
-
 /* A listing of interrupts used by external hardware devices */
 
-#define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
-#define IDE_IRQ				IRQ_GPIO(21)
+#define TOUCH_PANEL_IRQ			PXA_GPIO_TO_IRQ(5)
+#define IDE_IRQ				PXA_GPIO_TO_IRQ(21)
 
 #define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
 
-#define ETHERNET_IRQ			IRQ_GPIO(4)
+#define ETHERNET_IRQ			PXA_GPIO_TO_IRQ(4)
 #define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
 
 #define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
 
-#define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID		PXA_GPIO_TO_IRQ(7)
 #define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
 
-#define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID		PXA_GPIO_TO_IRQ(8)
 #define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
 
-#define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
-#define PCMCIA_S1_RDYINT		IRQ_GPIO(22)
+#define PCMCIA_S0_RDYINT		PXA_GPIO_TO_IRQ(19)
+#define PCMCIA_S1_RDYINT		PXA_GPIO_TO_IRQ(22)
 
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 7cc5a78..32975ad 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -88,10 +88,8 @@
 #define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
 
 #define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)
-#define PXA_GPIO_IRQ_NUM	(192)
-
-#define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
-#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+#define PXA_NR_BUILTIN_GPIO	(192)
+#define PXA_GPIO_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
 
 /*
  * The following interrupts are for board specific purposes. Since
@@ -100,7 +98,7 @@
  * By default, no board IRQ is reserved. It should be finished in
  * custom board since sparse IRQ is already enabled.
  */
-#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO)
 
 #define NR_IRQS			(IRQ_BOARD_START)
 
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index b6238cb..8066be5 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -1,13 +1,11 @@
 #ifndef __ASM_ARCH_LITTLETON_H
 #define __ASM_ARCH_LITTLETON_H
 
-#include <mach/gpio-pxa.h>
-
 #define LITTLETON_ETH_PHYS	0x30000000
 
 #define LITTLETON_GPIO_LCD_CS	(17)
 
-#define EXT0_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define EXT0_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
 #define EXT0_GPIO(x)	(EXT0_GPIO_BASE + (x))
 
 #define LITTLETON_NR_IRQS	(IRQ_BOARD_START + 8)
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 7cbfc5d..ba6a6e1 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -78,7 +78,7 @@
  * CPLD EGPIOs
  */
 
-#define MAGICIAN_EGPIO_BASE			NR_BUILTIN_GPIO
+#define MAGICIAN_EGPIO_BASE			PXA_NR_BUILTIN_GPIO
 #define MAGICIAN_EGPIO(reg,bit) \
 	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
 
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index ae536e8..2c44713 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -68,10 +68,10 @@
 /* 20, 53 and 86 are usb related too */
 
 /* INTERRUPTS */
-#define IRQ_GPIO_PALMLD_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET)
-#define IRQ_GPIO_PALMLD_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N)
-#define IRQ_GPIO_PALMLD_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ)
-#define IRQ_GPIO_PALMLD_IDE_IRQ		IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ)
+#define IRQ_GPIO_PALMLD_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET)
+#define IRQ_GPIO_PALMLD_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N)
+#define IRQ_GPIO_PALMLD_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ)
+#define IRQ_GPIO_PALMLD_IDE_IRQ		PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ)
 
 
 /** HERE ARE INIT VALUES **/
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 6baf746..0bd4f03 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -48,10 +48,10 @@
 #define GPIO_NR_PALMT5_BT_RESET			83
 
 /* INTERRUPTS */
-#define IRQ_GPIO_PALMT5_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N)
-#define IRQ_GPIO_PALMT5_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ)
-#define IRQ_GPIO_PALMT5_USB_DETECT	IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT)
-#define IRQ_GPIO_PALMT5_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET)
+#define IRQ_GPIO_PALMT5_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET)
 
 /** HERE ARE INIT VALUES **/
 
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 3f9dd3f..c383a21 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -52,8 +52,8 @@
 #define GPIO_NR_PALMTC_IR_DISABLE	45
 
 /* IRQs */
-#define IRQ_GPIO_PALMTC_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
-#define IRQ_GPIO_PALMTC_WLAN_READY	IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
+#define IRQ_GPIO_PALMTC_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_WLAN_READY	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY)
 
 /* UCB1400 GPIOs */
 #define GPIO_NR_PALMTC_POWER_DETECT	(0x80 | 0x00)
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 7074a6e..f2e5303 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -62,10 +62,10 @@
 #define GPIO_NR_PALMTX_NAND_BUFFER_DIR		79
 
 /* INTERRUPTS */
-#define IRQ_GPIO_PALMTX_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N)
-#define IRQ_GPIO_PALMTX_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ)
-#define IRQ_GPIO_PALMTX_USB_DETECT	IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT)
-#define IRQ_GPIO_PALMTX_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET)
+#define IRQ_GPIO_PALMTX_SD_DETECT_N	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_USB_DETECT	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_GPIO_RESET	PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET)
 
 /** HERE ARE INIT VALUES **/
 
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 4bac588..6bf28de 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -34,7 +34,7 @@
 
 /* I2C RTC */
 #define PCM027_RTC_IRQ_GPIO	0
-#define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ		PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO)
 #define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
 #define ADR_PCM027_RTC		0x51	/* I2C address */
 
@@ -43,21 +43,21 @@
 
 /* Ethernet chip (SMSC91C111) */
 #define PCM027_ETH_IRQ_GPIO	52
-#define PCM027_ETH_IRQ		IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ		PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO)
 #define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM027_ETH_PHYS		PXA_CS5_PHYS
 #define PCM027_ETH_SIZE		(1*1024*1024)
 
 /* CAN controller SJA1000 (unsupported yet) */
 #define PCM027_CAN_IRQ_GPIO	114
-#define PCM027_CAN_IRQ		IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ		PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO)
 #define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
 #define PCM027_CAN_PHYS		0x22000000
 #define PCM027_CAN_SIZE		0x100
 
 /* SPI GPIO expander (unsupported yet) */
 #define PCM027_EGPIO_IRQ_GPIO	27
-#define PCM027_EGPIO_IRQ	IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ	PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO)
 #define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
 #define PCM027_EGPIO_CS		24
 /*
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index 8a4383b..d727916 100644
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -28,14 +28,14 @@
 
 /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
 #define PCM990_CTRL_INT_IRQ_GPIO	9
-#define PCM990_CTRL_INT_IRQ		IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
 #define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
 #define PCM990_CTRL_BASE		0xea000000
 #define PCM990_CTRL_SIZE		(1*1024*1024)
 
 #define PCM990_CTRL_PWR_IRQ_GPIO	14
-#define PCM990_CTRL_PWR_IRQ		IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ		PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
 #define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 /* visible CPLD (U7) registers */
@@ -132,7 +132,7 @@
  * IDE
  */
 #define PCM990_IDE_IRQ_GPIO	13
-#define PCM990_IDE_IRQ		IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ		PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
 #define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 #define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
 #define PCM990_IDE_PLD_BASE	0xee000000
@@ -188,11 +188,11 @@
  * Compact Flash
  */
 #define PCM990_CF_IRQ_GPIO	11
-#define PCM990_CF_IRQ		IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ		PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
 #define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_CD_GPIO	12
-#define PCM990_CF_CD		IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD		PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
 #define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
 
 #define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
@@ -258,14 +258,14 @@
  * Wolfson AC97 Touch
  */
 #define PCM990_AC97_IRQ_GPIO	10
-#define PCM990_AC97_IRQ		IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ		PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
 #define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
 
 /*
  * MMC phyCORE
  */
 #define PCM990_MMC0_IRQ_GPIO	9
-#define PCM990_MMC0_IRQ		IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ		PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
 #define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 83d1cfd..f32ff75 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -47,18 +47,18 @@
 #define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
 
 /* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
-#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
-#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO(4)
-#define POODLE_IRQ_GPIO_CO		IRQ_GPIO(16)
-#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
-#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO(11)
-#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO(10)
-#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
-#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
-#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(13)
+#define POODLE_IRQ_GPIO_ON_KEY		PXA_GPIO_TO_IRQ(0)
+#define POODLE_IRQ_GPIO_AC_IN		PXA_GPIO_TO_IRQ(1)
+#define POODLE_IRQ_GPIO_HP_IN		PXA_GPIO_TO_IRQ(4)
+#define POODLE_IRQ_GPIO_CO		PXA_GPIO_TO_IRQ(16)
+#define POODLE_IRQ_GPIO_TP_INT		PXA_GPIO_TO_IRQ(5)
+#define POODLE_IRQ_GPIO_WAKEUP		PXA_GPIO_TO_IRQ(11)
+#define POODLE_IRQ_GPIO_GA_INT		PXA_GPIO_TO_IRQ(10)
+#define POODLE_IRQ_GPIO_CF_IRQ		PXA_GPIO_TO_IRQ(17)
+#define POODLE_IRQ_GPIO_CF_CD		PXA_GPIO_TO_IRQ(14)
+#define POODLE_IRQ_GPIO_nSD_INT		PXA_GPIO_TO_IRQ(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT	PXA_GPIO_TO_IRQ(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	PXA_GPIO_TO_IRQ(13)
 
 /* SCOOP GPIOs */
 #define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
@@ -71,7 +71,7 @@
 #define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
 #define POODLE_SCOOP_IO_OUT	( 0 )
 
-#define POODLE_SCOOP_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define POODLE_SCOOP_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
 #define POODLE_GPIO_CHARGE_ON	(POODLE_SCOOP_GPIO_BASE + 0)
 #define POODLE_GPIO_CP401	(POODLE_SCOOP_GPIO_BASE + 2)
 #define POODLE_GPIO_VPEN	(POODLE_SCOOP_GPIO_BASE + 7)
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index 685749a..0bfe650 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -108,7 +108,7 @@
 #define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
 #define SPITZ_SCP_SUS_SET     0
 
-#define SPITZ_SCP_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define SPITZ_SCP_GPIO_BASE	(PXA_NR_BUILTIN_GPIO)
 #define SPITZ_GPIO_LED_GREEN	(SPITZ_SCP_GPIO_BASE + 0)
 #define SPITZ_GPIO_JK_B		(SPITZ_SCP_GPIO_BASE + 1)
 #define SPITZ_GPIO_CHRG_ON	(SPITZ_SCP_GPIO_BASE + 2)
@@ -140,7 +140,7 @@
                              SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
 #define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
 
-#define SPITZ_SCP2_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define SPITZ_SCP2_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
 #define SPITZ_GPIO_IR_ON		(SPITZ_SCP2_GPIO_BASE + 0)
 #define SPITZ_GPIO_AKIN_PULLUP		(SPITZ_SCP2_GPIO_BASE + 1)
 #define SPITZ_GPIO_RESERVED_1		(SPITZ_SCP2_GPIO_BASE + 2)
@@ -152,7 +152,7 @@
 #define SPITZ_GPIO_MIC_BIAS		(SPITZ_SCP2_GPIO_BASE + 8)
 
 /* Akita IO Expander GPIOs */
-#define AKITA_IOEXP_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define AKITA_IOEXP_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
 #define AKITA_GPIO_RESERVED_0		(AKITA_IOEXP_GPIO_BASE + 0)
 #define AKITA_GPIO_RESERVED_1		(AKITA_IOEXP_GPIO_BASE + 1)
 #define AKITA_GPIO_MIC_BIAS		(AKITA_IOEXP_GPIO_BASE + 2)
@@ -164,23 +164,23 @@
 
 /* Spitz IRQ Definitions */
 
-#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
-#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
-#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
-#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
-#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
-#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
-#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
-#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
-#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
-#define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
-#define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
-#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
-#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
-#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
-#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
-#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
-#define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+#define SPITZ_IRQ_GPIO_KEY_INT        PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN          PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT         PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN          PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT         PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC           PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY         PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA            PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB            PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_BAT_COVER      PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_FATAL_BAT      PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_CO             PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CF_IRQ         PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD          PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ        PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT        PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT     PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT)
 
 /*
  * Shared data structures
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 1272c4b..2bb0e86 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -24,7 +24,7 @@
 /*
  * SCOOP2 internal GPIOs
  */
-#define TOSA_SCOOP_GPIO_BASE		NR_BUILTIN_GPIO
+#define TOSA_SCOOP_GPIO_BASE		PXA_NR_BUILTIN_GPIO
 #define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
 #define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
 #define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
@@ -42,7 +42,7 @@
 /*
  * SCOOP2 jacket GPIOs
  */
-#define TOSA_SCOOP_JC_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define TOSA_SCOOP_JC_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 12)
 #define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
 #define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
 #define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
@@ -59,7 +59,7 @@
 /*
  * TC6393XB GPIOs
  */
-#define TOSA_TC6393XB_GPIO_BASE		(NR_BUILTIN_GPIO + 2 * 12)
+#define TOSA_TC6393XB_GPIO_BASE		(PXA_NR_BUILTIN_GPIO + 2 * 12)
 
 #define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
 #define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
@@ -141,30 +141,30 @@
 /*
  * Interrupts
  */
-#define TOSA_IRQ_GPIO_WAKEUP        	IRQ_GPIO(TOSA_GPIO_WAKEUP)
-#define TOSA_IRQ_GPIO_AC_IN         	IRQ_GPIO(TOSA_GPIO_AC_IN)
-#define TOSA_IRQ_GPIO_RECORD_BTN    	IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
-#define TOSA_IRQ_GPIO_SYNC          	IRQ_GPIO(TOSA_GPIO_SYNC)
-#define TOSA_IRQ_GPIO_USB_IN        	IRQ_GPIO(TOSA_GPIO_USB_IN)
-#define TOSA_IRQ_GPIO_JACKET_DETECT 	IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
-#define TOSA_IRQ_GPIO_nSD_INT       	IRQ_GPIO(TOSA_GPIO_nSD_INT)
-#define TOSA_IRQ_GPIO_nSD_DETECT    	IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
-#define TOSA_IRQ_GPIO_BAT1_CRG      	IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
-#define TOSA_IRQ_GPIO_CF_CD         	IRQ_GPIO(TOSA_GPIO_CF_CD)
-#define TOSA_IRQ_GPIO_BAT0_CRG      	IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393XB_INT    	IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
-#define TOSA_IRQ_GPIO_BAT0_LOW      	IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
-#define TOSA_IRQ_GPIO_EAR_IN        	IRQ_GPIO(TOSA_GPIO_EAR_IN)
-#define TOSA_IRQ_GPIO_CF_IRQ        	IRQ_GPIO(TOSA_GPIO_CF_IRQ)
-#define TOSA_IRQ_GPIO_ON_KEY        	IRQ_GPIO(TOSA_GPIO_ON_KEY)
-#define TOSA_IRQ_GPIO_VGA_LINE      	IRQ_GPIO(TOSA_GPIO_VGA_LINE)
-#define TOSA_IRQ_GPIO_TP_INT        	IRQ_GPIO(TOSA_GPIO_TP_INT)
-#define TOSA_IRQ_GPIO_JC_CF_IRQ     	IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
-#define TOSA_IRQ_GPIO_BAT_LOCKED    	IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
-#define TOSA_IRQ_GPIO_BAT1_LOW      	IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
-#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	IRQ_GPIO(69+(a))
+#define TOSA_IRQ_GPIO_WAKEUP        	PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_AC_IN         	PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_RECORD_BTN    	PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_SYNC          	PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_USB_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_JACKET_DETECT 	PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_nSD_INT       	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_DETECT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_BAT1_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_CF_CD         	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_BAT0_CRG      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_TC6393XB_INT    	PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT)
+#define TOSA_IRQ_GPIO_BAT0_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_EAR_IN        	PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_CF_IRQ        	PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_ON_KEY        	PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_VGA_LINE      	PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_TP_INT        	PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ     	PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_BAT_LOCKED    	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT1_LOW      	PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	PXA_GPIO_TO_IRQ(69+(a))
 
-#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW)
 
 #define TOSA_KEY_SYNC		KEY_102ND /* ??? */
 
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index 903e1a2..d2ca010 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -43,30 +43,30 @@
 
 /* Ethernet Controller Davicom DM9000 */
 #define GPIO_DM9000		101
-#define TRIZEPS4_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
+#define TRIZEPS4_ETH_IRQ	PXA_GPIO_TO_IRQ(GPIO_DM9000)
 
 /* UCB1400 audio / TS-controller */
 #define GPIO_UCB1400		1
-#define TRIZEPS4_UCB1400_IRQ	IRQ_GPIO(GPIO_UCB1400)
+#define TRIZEPS4_UCB1400_IRQ	PXA_GPIO_TO_IRQ(GPIO_UCB1400)
 
 /* PCMCIA socket Compact Flash */
 #define GPIO_PCD		11		/* PCMCIA Card Detect */
-#define TRIZEPS4_CD_IRQ		IRQ_GPIO(GPIO_PCD)
+#define TRIZEPS4_CD_IRQ		PXA_GPIO_TO_IRQ(GPIO_PCD)
 #define GPIO_PRDY		13		/* READY / nINT */
-#define TRIZEPS4_READY_NINT	IRQ_GPIO(GPIO_PRDY)
+#define TRIZEPS4_READY_NINT	PXA_GPIO_TO_IRQ(GPIO_PRDY)
 
 /* MMC socket */
 #define GPIO_MMC_DET		12
-#define TRIZEPS4_MMC_IRQ	IRQ_GPIO(GPIO_MMC_DET)
+#define TRIZEPS4_MMC_IRQ	PXA_GPIO_TO_IRQ(GPIO_MMC_DET)
 
 /* DOC NAND chip */
 #define GPIO_DOC_LOCK           94
 #define GPIO_DOC_IRQ            93
-#define TRIZEPS4_DOC_IRQ        IRQ_GPIO(GPIO_DOC_IRQ)
+#define TRIZEPS4_DOC_IRQ        PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ)
 
 /* SPI interface */
 #define GPIO_SPI                53
-#define TRIZEPS4_SPI_IRQ        IRQ_GPIO(GPIO_SPI)
+#define TRIZEPS4_SPI_IRQ        PXA_GPIO_TO_IRQ(GPIO_SPI)
 
 /* LEDS using tx2 / rx2 */
 #define GPIO_SYS_BUSY_LED	46
@@ -74,7 +74,7 @@
 
 /* Off-module PIC on ConXS board */
 #define GPIO_PIC		0
-#define TRIZEPS4_PIC_IRQ	IRQ_GPIO(GPIO_PIC)
+#define TRIZEPS4_PIC_IRQ	PXA_GPIO_TO_IRQ(GPIO_PIC)
 
 #ifdef CONFIG_MACH_TRIZEPS_CONXS
 /* for CONXS base board define these registers */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 532c5d3..5dae15e 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -22,7 +22,6 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
 
 #include "generic.h"
 
@@ -92,44 +91,6 @@
 	.irq_unmask	= pxa_unmask_irq,
 };
 
-/*
- * GPIO IRQs for GPIO 0 and 1
- */
-static int pxa_set_low_gpio_type(struct irq_data *d, unsigned int type)
-{
-	int gpio = d->irq - IRQ_GPIO0;
-
-	if (__gpio_is_occupied(gpio)) {
-		pr_err("%s failed: GPIO is configured\n", __func__);
-		return -EINVAL;
-	}
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		GRER0 |= GPIO_bit(gpio);
-	else
-		GRER0 &= ~GPIO_bit(gpio);
-
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		GFER0 |= GPIO_bit(gpio);
-	else
-		GFER0 &= ~GPIO_bit(gpio);
-
-	return 0;
-}
-
-static void pxa_ack_low_gpio(struct irq_data *d)
-{
-	GEDR0 = (1 << (d->irq - IRQ_GPIO0));
-}
-
-static struct irq_chip pxa_low_gpio_chip = {
-	.name		= "GPIO-l",
-	.irq_ack	= pxa_ack_low_gpio,
-	.irq_mask	= pxa_mask_irq,
-	.irq_unmask	= pxa_unmask_irq,
-	.irq_set_type	= pxa_set_low_gpio_type,
-};
-
 asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs)
 {
 	uint32_t icip, icmr, mask;
@@ -160,26 +121,7 @@
 	} while (1);
 }
 
-static void __init pxa_init_low_gpio_irq(set_wake_t fn)
-{
-	int irq;
-
-	/* clear edge detection on GPIO 0 and 1 */
-	GFER0 &= ~0x3;
-	GRER0 &= ~0x3;
-	GEDR0 = 0x3;
-
-	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
-		irq_set_chip_and_handler(irq, &pxa_low_gpio_chip,
-					 handle_edge_irq);
-		irq_set_chip_data(irq, irq_base(0));
-		set_irq_flags(irq, IRQF_VALID);
-	}
-
-	pxa_low_gpio_chip.irq_set_wake = fn;
-}
-
-void __init pxa_init_irq(int irq_nr, set_wake_t fn)
+void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
 {
 	int irq, i, n;
 
@@ -209,7 +151,6 @@
 	__raw_writel(1, irq_base(0) + ICCR);
 
 	pxa_internal_irq_chip.irq_set_wake = fn;
-	pxa_init_low_gpio_irq(fn);
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 7b324ec..d21e28b4 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -124,8 +124,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
+		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	}
 };
@@ -396,7 +396,7 @@
 		.type		= "da9034",
 		.addr		= 0x34,
 		.platform_data	= &littleton_da9034_info,
-		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)),
+		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
 	},
 	[1] = {
 		.type		= "max7320",
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1dd5302..565dd2f 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -152,8 +152,8 @@
 					 handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
-	irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
-	irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
+	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c48ce6d..2fb2b50 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -170,8 +170,8 @@
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	irq_set_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
-	irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
+	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 4b796c3..e340ea0 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -184,8 +184,8 @@
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
-		.end   = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
+		.start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+		.end   = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -468,8 +468,8 @@
 	},
 	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
 	[1] = {
-		.start  = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
-		.end    = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.start  = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.end    = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
 		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 0567d39..ea62a99 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -178,8 +178,8 @@
 	MST_INTMSKENA = 0;
 	MST_INTSETCLR = 0;
 
-	irq_set_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
-	irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
+	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 43a5f68..f147755 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -13,6 +13,7 @@
  *  published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -20,7 +21,6 @@
 
 #include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa2xx.h>
-#include <mach/gpio-pxa.h>
 
 #include "generic.h"
 
@@ -29,6 +29,10 @@
 #define GAFR_L(x)	__GAFR(0, x)
 #define GAFR_U(x)	__GAFR(1, x)
 
+#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPLR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5))
+#define GPDR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+
 #define PWER_WE35	(1 << 24)
 
 struct gpio_desc {
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index b938fc2..23f90c7 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -541,15 +541,15 @@
 static struct resource power_resources[] = {
 	[0] = {
 		.name	= "ac",
-		.start	= gpio_to_irq(GPIO96_AC_DETECT),
-		.end	= gpio_to_irq(GPIO96_AC_DETECT),
+		.start	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
+		.end	= PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 		IORESOURCE_IRQ_LOWEDGE,
 	},
 	[1] = {
 		.name	= "usb",
-		.start	= gpio_to_irq(GPIO13_nUSB_DETECT),
-		.end	= gpio_to_irq(GPIO13_nUSB_DETECT),
+		.start	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
+		.end	= PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
 		IORESOURCE_IRQ_LOWEDGE,
 	},
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index 90928d6..83570a7 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -417,8 +417,8 @@
 	       .flags = IORESOURCE_MEM
 	},
 	[2] = {
-	       .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
-	       .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+	       .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
+	       .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
 	       .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
 	}
 };
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6d38c65..abab4e2 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -378,7 +378,7 @@
 #include <linux/i2c/pca953x.h>
 
 static struct pca953x_platform_data pca9536_data = {
-	.gpio_base	= NR_BUILTIN_GPIO,
+	.gpio_base	= PXA_NR_BUILTIN_GPIO,
 };
 
 static int gpio_bus_switch = -EINVAL;
@@ -406,9 +406,9 @@
 	int ret;
 
 	if (gpio_bus_switch < 0) {
-		ret = gpio_request(NR_BUILTIN_GPIO, "camera");
+		ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera");
 		if (!ret) {
-			gpio_bus_switch = NR_BUILTIN_GPIO;
+			gpio_bus_switch = PXA_NR_BUILTIN_GPIO;
 			gpio_direction_output(gpio_bus_switch, 0);
 		}
 	}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 50c8331..8ee4b6c 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -166,8 +166,8 @@
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= IRQ_GPIO(10),
-		.end		= IRQ_GPIO(10),
+		.start		= PXA_GPIO_TO_IRQ(10),
+		.end		= PXA_GPIO_TO_IRQ(10),
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -212,7 +212,7 @@
 		.bus_num	= 1,
 		.platform_data	= &poodle_ads7846_info,
 		.controller_data= &poodle_ads7846_chip,
-		.irq		= gpio_to_irq(POODLE_GPIO_TP_INT),
+		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index f05f948..8a775f6 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -17,6 +17,7 @@
  * need be.
  */
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -208,6 +209,7 @@
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
 	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 static struct clk_lookup pxa25x_hwuart_clkreg =
@@ -287,7 +289,7 @@
 
 static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
 {
-	int gpio = irq_to_gpio(d->irq);
+	int gpio = pxa_irq_to_gpio(d->irq);
 	uint32_t mask = 0;
 
 	if (gpio >= 0 && gpio < 85)
@@ -312,14 +314,12 @@
 void __init pxa25x_init_irq(void)
 {
 	pxa_init_irq(32, pxa25x_set_wake);
-	pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake);
 }
 
 #ifdef CONFIG_CPU_PXA26x
 void __init pxa26x_init_irq(void)
 {
 	pxa_init_irq(32, pxa25x_set_wake);
-	pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index bc5a98e..6c49e66 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -12,6 +12,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -229,6 +230,7 @@
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
 	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -355,7 +357,7 @@
  */
 static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
 {
-	int gpio = irq_to_gpio(d->irq);
+	int gpio = pxa_irq_to_gpio(d->irq);
 	uint32_t mask;
 
 	if (gpio >= 0 && gpio < 128)
@@ -386,7 +388,6 @@
 void __init pxa27x_init_irq(void)
 {
 	pxa_init_irq(34, pxa27x_set_wake);
-	pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
 }
 
 static struct map_desc pxa27x_io_desc[] __initdata = {
@@ -422,6 +423,7 @@
 }
 
 static struct platform_device *devices[] __initdata = {
+	&pxa_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 0737c59..4f402af 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -25,7 +25,6 @@
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
 #include <mach/hardware.h>
-#include <mach/gpio-pxa.h>
 #include <mach/pxa3xx-regs.h>
 #include <mach/reset.h>
 #include <mach/ohci.h>
@@ -56,6 +55,7 @@
 static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0);
 
 static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
 static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
@@ -88,6 +88,7 @@
 	INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
+	INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -365,7 +366,8 @@
 	.irq_set_type	= pxa_set_ext_wakeup_type,
 };
 
-static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
+static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
+					   unsigned int))
 {
 	int irq;
 
@@ -388,7 +390,6 @@
 
 	pxa_init_irq(56, pxa3xx_set_wake);
 	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
-	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
 }
 
 static struct map_desc pxa3xx_io_desc[] __initdata = {
@@ -417,6 +418,7 @@
 }
 
 static struct platform_device *devices[] __initdata = {
+	&pxa_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 51371b3..d082a58 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -20,7 +20,6 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
-#include <mach/gpio-pxa.h>
 #include <mach/pxa3xx-regs.h>
 #include <mach/pxa930.h>
 #include <mach/reset.h>
@@ -212,6 +211,7 @@
 static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0);
 
 static struct clk_lookup pxa95x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
@@ -230,12 +230,12 @@
 	INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
 	INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
 	INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
+	INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
 };
 
 void __init pxa95x_init_irq(void)
 {
 	pxa_init_irq(96, NULL);
-	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
 }
 
 /*
@@ -248,6 +248,7 @@
 }
 
 static struct platform_device *devices[] __initdata = {
+	&pxa_device_gpio,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
 	&pxa27x_device_ssp1,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index f0c05f4..78d6437 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -292,8 +292,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= gpio_to_irq(GPIO_ETH_IRQ),
-		.end	= gpio_to_irq(GPIO_ETH_IRQ),
+		.start	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
 	}
 };
@@ -672,7 +672,7 @@
 	.chip_select	= 1,			\
 	.controller_data = (void *) GPIO_ACCEL_CS,	\
 	.platform_data	= &lis3_pdata,		\
-	.irq		= gpio_to_irq(GPIO_ACCEL_IRQ),	\
+	.irq		= PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ),	\
 }
 
 #define SPI_DAC7512	\
@@ -956,7 +956,7 @@
 static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
 	.type	= "eeti_ts",
 	.addr	= 0x0a,
-	.irq	= gpio_to_irq(GPIO_TOUCH_IRQ),
+	.irq	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
 	.platform_data = &eeti_ts_pdata,
 };
 
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fc2c1e0..423ec89 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -96,8 +96,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
-		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
@@ -502,7 +502,7 @@
 		.type		= "da9034",
 		.addr		= 0x34,
 		.platform_data	= &saar_da9034_info,
-		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 3e999e3..d1cdd6a 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -92,7 +92,7 @@
 		.type		= "88PM860x",
 		.addr		= 0x34,
 		.platform_data	= &saarb_pm8607_info,
-		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 785880f..8d5168d 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -907,24 +907,24 @@
 	gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
 
 	/* Register interrupt handlers */
-	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
-		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
+	if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
+		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
 	}
 
-	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
-		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
+	if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
+		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
 	}
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
-		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
-			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
+		if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
+			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
 		}
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq) {
 		/* Register interrupt handler. */
-		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
-			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
+		if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
+			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
 		}
 	}
 
@@ -953,14 +953,14 @@
 
 	led_trigger_unregister_simple(sharpsl_charge_led_trigger);
 
-	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
-	free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+	free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+	free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
 
 	if (sharpsl_pm.machinfo->gpio_fatal)
-		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+		free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
 
 	if (sharpsl_pm.machinfo->batfull_irq)
-		free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+		free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
 
 	gpio_free(sharpsl_pm.machinfo->gpio_batlock);
 	gpio_free(sharpsl_pm.machinfo->gpio_batfull);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 953a919..1b39cec 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -552,7 +552,7 @@
 		.chip_select		= 0,
 		.platform_data		= &spitz_ads7846_info,
 		.controller_data	= &spitz_ads7846_chip,
-		.irq			= gpio_to_irq(SPITZ_GPIO_TP_INT),
+		.irq			= PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
 	}, {
 		.modalias		= "corgi-lcd",
 		.max_speed_hz		= 50000,
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 094279a..34cbdac 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
@@ -41,6 +42,7 @@
 static struct gpio spitz_charger_gpios[] = {
 	{ SPITZ_GPIO_KEY_INT,	GPIOF_IN, "Keyboard Interrupt" },
 	{ SPITZ_GPIO_SYNC,	GPIOF_IN, "Sync" },
+	{ SPITZ_GPIO_AC_IN,     GPIOF_IN, "Charger Detection" },
 	{ SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
 	{ SPITZ_GPIO_JK_B,	  GPIOF_OUT_INIT_LOW, "JK B" },
 	{ SPITZ_GPIO_CHRG_ON,	  GPIOF_OUT_INIT_LOW, "Charger On" },
@@ -169,14 +171,19 @@
 
 static unsigned long spitz_charger_wakeup(void)
 {
-	return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC));
+	unsigned long ret;
+	ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+		<< GPIO_bit(SPITZ_GPIO_KEY_INT))
+		| (!gpio_get_value(SPITZ_GPIO_SYNC)
+		<< GPIO_bit(SPITZ_GPIO_SYNC));
+	return ret;
 }
 
 unsigned long spitzpm_read_devdata(int type)
 {
 	switch (type) {
 	case SHARPSL_STATUS_ACIN:
-		return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
+		return !gpio_get_value(SPITZ_GPIO_AC_IN);
 	case SHARPSL_STATUS_LOCK:
 		return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
 	case SHARPSL_STATUS_CHRGFULL:
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4c9a48b..940ca56 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -376,7 +376,7 @@
 		.bus_num = 1,
 		.chip_select = 0,
 		.controller_data = &staccel_chip_info,
-		.irq = IRQ_GPIO(96),
+		.irq = PXA_GPIO_TO_IRQ(96),
 	}, {
 		.modalias = "cc2420",
 		.max_speed_hz = 6500000,
@@ -546,7 +546,7 @@
 		.type = "da9030",
 		.addr = 0x49,
 		.platform_data = &imote2_da9030_pdata,
-		.irq = gpio_to_irq(1),
+		.irq = PXA_GPIO_TO_IRQ(1),
 	},
 };
 
@@ -560,18 +560,18 @@
 		/* Through a nand gate - Also beware, on V2 sensor board the
 		 * pull up resistors are missing.
 		 */
-		.irq = IRQ_GPIO(99),
+		.irq = PXA_GPIO_TO_IRQ(99),
 	}, { /* ITS400 Sensor board only */
 		.type = "tsl2561",
 		.addr = 0x49,
 		/* Through a nand gate - Also beware, on V2 sensor board the
 		 * pull up resistors are missing.
 		 */
-		.irq = IRQ_GPIO(99),
+		.irq = PXA_GPIO_TO_IRQ(99),
 	}, { /* ITS400 Sensor board only */
 		.type = "tmp175",
 		.addr = 0x4A,
-		.irq = IRQ_GPIO(96),
+		.irq = PXA_GPIO_TO_IRQ(96),
 	}, { /* IMB400 Multimedia board */
 		.type = "wm8940",
 		.addr = 0x1A,
@@ -661,8 +661,8 @@
 		.flags = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start = IRQ_GPIO(40),
-		.end = IRQ_GPIO(40),
+		.start = PXA_GPIO_TO_IRQ(40),
+		.end = PXA_GPIO_TO_IRQ(40),
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
@@ -707,7 +707,7 @@
 	}
 	gpio_direction_input(SG2_GPIO_nSD_DETECT);
 
-	err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+	err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
 			  stargate2_detect_int,
 			  IRQ_TYPE_EDGE_BOTH,
 			  "MMC card detect",
@@ -738,7 +738,7 @@
 
 static void stargate2_mci_exit(struct device *dev, void *data)
 {
-	free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+	free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
 	gpio_free(SG2_SD_POWER_ENABLE);
 	gpio_free(SG2_GPIO_nSD_DETECT);
 }
@@ -913,7 +913,7 @@
 		.type = "da9030",
 		.addr = 0x49,
 		.platform_data = &stargate2_da9030_pdata,
-		.irq = gpio_to_irq(1),
+		.irq = PXA_GPIO_TO_IRQ(1),
 	},
 };
 
@@ -938,18 +938,18 @@
 		/* Through a nand gate - Also beware, on V2 sensor board the
 		 * pull up resistors are missing.
 		 */
-		.irq = IRQ_GPIO(99),
+		.irq = PXA_GPIO_TO_IRQ(99),
 	}, { /* ITS400 Sensor board only */
 		.type = "tsl2561",
 		.addr = 0x49,
 		/* Through a nand gate - Also beware, on V2 sensor board the
 		 * pull up resistors are missing.
 		 */
-		.irq = IRQ_GPIO(99),
+		.irq = PXA_GPIO_TO_IRQ(99),
 	}, { /* ITS400 Sensor board only */
 		.type = "tmp175",
 		.addr = 0x4A,
-		.irq = IRQ_GPIO(96),
+		.irq = PXA_GPIO_TO_IRQ(96),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ad47bb9..43bdcb9 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -85,8 +85,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
-		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.start	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.end	= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd56916..46c60b3 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -101,7 +101,7 @@
 		.type		= "88PM860x",
 		.addr		= 0x34,
 		.platform_data	= &evb3_pm8607_info,
-		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+		.irq		= PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
 	},
 };
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 402b0c96..1ddb982 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -404,8 +404,8 @@
 static struct resource tosa_power_resource[] = {
 	{
 		.name		= "ac",
-		.start		= gpio_to_irq(TOSA_GPIO_AC_IN),
-		.end		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.start		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
+		.end		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
 		.flags		= IORESOURCE_IRQ |
 				  IORESOURCE_IRQ_HIGHEDGE |
 				  IORESOURCE_IRQ_LOWEDGE,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 242ddae..d9a653a 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -422,8 +422,8 @@
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = gpio_to_irq(VIPER_ETH_GPIO),
-		.end    = gpio_to_irq(VIPER_ETH_GPIO),
+		.start  = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
+		.end    = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
 		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 	[2] = {
@@ -546,7 +546,7 @@
 	/* External UARTs */
 	{
 		.mapbase	= VIPER_UARTA_PHYS,
-		.irq		= gpio_to_irq(VIPER_UARTA_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
@@ -556,7 +556,7 @@
 	},
 	{
 		.mapbase	= VIPER_UARTB_PHYS,
-		.irq		= gpio_to_irq(VIPER_UARTB_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
@@ -596,8 +596,8 @@
 		.flags  = IORESOURCE_MEM,
 	},
 	[2] = {
-		.start  = gpio_to_irq(VIPER_USB_GPIO),
-		.end    = gpio_to_irq(VIPER_USB_GPIO),
+		.start  = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
+		.end    = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
 		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index ca0c661..9edeec6 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -395,8 +395,8 @@
 		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
-		.start	= IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
-		.end	= IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+		.start	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
+		.end	= PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
@@ -433,7 +433,7 @@
 };
 
 static struct ucb1400_pdata vpac270_ucb1400_pdata = {
-	.irq		= IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
+	.irq		= PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ),
 };
 
 static struct platform_device vpac270_ucb1400_device = {
@@ -610,8 +610,8 @@
 	       .flags	= IORESOURCE_DMA
 	},
 	[3] = {	/* IDE IRQ pin */
-	       .start	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
-	       .end	= gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+	       .start	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
+	       .end	= PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
 	       .flags	= IORESOURCE_IRQ
 	}
 };
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index ead32c9..4246618 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -573,7 +573,7 @@
 	.modalias		= "libertas_spi",
 	.platform_data		= &z2_lbs_pdata,
 	.controller_data	= &z2_lbs_chip_info,
-	.irq			= gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ),
+	.irq			= PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ),
 	.max_speed_hz		= 13000000,
 	.bus_num		= 1,
 	.chip_select		= 0,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 498b83b..68de9c1 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -233,7 +233,7 @@
 	/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
 	{ /* COM1 */
 		.mapbase	= 0x10000000,
-		.irq		= gpio_to_irq(ZEUS_UARTA_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 14745600,
 		.regshift	= 1,
@@ -242,7 +242,7 @@
 	},
 	{ /* COM2 */
 		.mapbase	= 0x10800000,
-		.irq		= gpio_to_irq(ZEUS_UARTB_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 14745600,
 		.regshift	= 1,
@@ -251,7 +251,7 @@
 	},
 	{ /* COM3 */
 		.mapbase	= 0x11000000,
-		.irq		= gpio_to_irq(ZEUS_UARTC_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 14745600,
 		.regshift	= 1,
@@ -260,7 +260,7 @@
 	},
 	{ /* COM4 */
 		.mapbase	= 0x11800000,
-		.irq		= gpio_to_irq(ZEUS_UARTD_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO),
 		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 14745600,
 		.regshift	= 1,
@@ -321,8 +321,8 @@
 		.flags = IORESOURCE_MEM
 	},
 	[2] = {
-		.start = gpio_to_irq(ZEUS_ETH0_GPIO),
-		.end   = gpio_to_irq(ZEUS_ETH0_GPIO),
+		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
@@ -339,8 +339,8 @@
 		.flags = IORESOURCE_MEM,
 	},
 	[2] = {
-		.start = gpio_to_irq(ZEUS_ETH1_GPIO),
-		.end   = gpio_to_irq(ZEUS_ETH1_GPIO),
+		.start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
+		.end   = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
 		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	},
 };
@@ -423,7 +423,7 @@
 	[0] = {
 		.modalias	= "mcp2515",
 		.platform_data	= &zeus_mcp2515_pdata,
-		.irq		= gpio_to_irq(ZEUS_CAN_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
 		.max_speed_hz	= 1*1000*1000,
 		.bus_num	= 3,
 		.mode		= SPI_MODE_0,
@@ -753,7 +753,7 @@
 	{
 		I2C_BOARD_INFO("pca9535",	0x20),
 		.platform_data	= &zeus_pca953x_pdata[2],
-		.irq		= gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+		.irq		= PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
 	},
 	{ I2C_BOARD_INFO("lm75a",	0x48) },
 	{ I2C_BOARD_INFO("24c01",	0x50) },
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 6c39c33..a4c8075 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -408,8 +408,8 @@
 	 * Note: We depend that the bootloader set
 	 * the correct value to MSC register for SMC91x.
 	 */
-	smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
-	smc91x_resources[1].end   = gpio_to_irq(gpio_eth_irq);
+	smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
+	smc91x_resources[1].end   = PXA_GPIO_TO_IRQ(gpio_eth_irq);
 	platform_device_register(&smc91x_device);
 
 	pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 93c64d8..86e59c0 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -231,12 +231,12 @@
 		.type		= "pca9539",
 		.addr		= 0x74,
 		.platform_data	= &gpio_exp[0],
-		.irq		= IRQ_GPIO(18),
+		.irq		= PXA_GPIO_TO_IRQ(18),
 	}, {
 		.type		= "pca9539",
 		.addr		= 0x75,
 		.platform_data	= &gpio_exp[1],
-		.irq		= IRQ_GPIO(19),
+		.irq		= PXA_GPIO_TO_IRQ(19),
 	},
 };
 
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 30e1071..6e5d3a0 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -357,7 +357,7 @@
 #define INT_35XX_EMAC_C0_TX_PULSE_IRQ	69
 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ	70
 #define INT_35XX_USBOTG_IRQ		71
-#define INT_35XX_UART4			84
+#define INT_35XX_UART4_IRQ		84
 #define INT_35XX_CCDC_VD0_IRQ		88
 #define INT_35XX_CCDC_VD1_IRQ		92
 #define INT_35XX_CCDC_VD2_IRQ		93
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 94cf70a..f75946c 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -96,6 +96,7 @@
 		 */
 		u8  wires;	/* Used for the MMC driver on omap1 and 2420 */
 		u32 caps;	/* Used for the MMC driver on 2430 and later */
+		u32 pm_caps;	/* PM capabilities of the mmc */
 
 		/*
 		 * nomux means "standard" muxing is wrong on this board, and
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 1ab9fd6..865a2ba 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -44,6 +44,7 @@
 #define OMAP3_UART2_BASE	OMAP2_UART2_BASE
 #define OMAP3_UART3_BASE	0x49020000
 #define OMAP3_UART4_BASE	0x49042000	/* Only on 36xx */
+#define OMAP3_UART4_AM35XX_BASE	0x4809E000	/* Only on AM35xx */
 
 /* OMAP4 serial ports */
 #define OMAP4_UART1_BASE	OMAP2_UART1_BASE
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 17d3c93..2b66dc26 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -100,9 +100,6 @@
 
 extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
 
-extern int omap_usbhs_enable(struct device *dev);
-extern void omap_usbhs_disable(struct device *dev);
-
 extern int omap4430_phy_power(struct device *dev, int ID, int on);
 extern int omap4430_phy_set_clk(struct device *dev, int on);
 extern int omap4430_phy_init(struct device *dev);
diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
deleted file mode 100644
index b6390be..0000000
--- a/arch/arm/plat-pxa/include/plat/gpio-pxa.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __PLAT_PXA_GPIO_H
-#define __PLAT_PXA_GPIO_H
-
-struct irq_data;
-
-/*
- * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
- * one set of registers. The register offsets are organized below:
- *
- *           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
- * BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
- * BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
- * BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050
- *
- * BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
- * BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
- * BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150
- *
- * NOTE:
- *   BANK 3 is only available on PXA27x and later processors.
- *   BANK 4 and 5 are only available on PXA935
- */
-
-#define GPIO_BANK(n)	(GPIO_REGS_VIRT + BANK_OFF(n))
-
-#define GPLR_OFFSET	0x00
-#define GPDR_OFFSET	0x0C
-#define GPSR_OFFSET	0x18
-#define GPCR_OFFSET	0x24
-#define GRER_OFFSET	0x30
-#define GFER_OFFSET	0x3C
-#define GEDR_OFFSET	0x48
-
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
-typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
-
-extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
-
-#endif /* __PLAT_PXA_GPIO_H */
diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h
deleted file mode 100644
index 258f772..0000000
--- a/arch/arm/plat-pxa/include/plat/gpio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __PLAT_GPIO_H
-#define __PLAT_GPIO_H
-
-#define __ARM_GPIOLIB_COMPLEX
-
-/* The individual machine provides register offsets and NR_BUILTIN_GPIO */
-#include <mach/gpio-pxa.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
-		return GPLR(gpio) & GPIO_bit(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
-		if (value)
-			GPSR(gpio) = GPIO_bit(gpio);
-		else
-			GPCR(gpio) = GPIO_bit(gpio);
-	} else
-		__gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep		__gpio_cansleep
-
-#endif /* __PLAT_GPIO_H */
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 1f17bde..7c756fb 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -109,7 +109,7 @@
 	u8 addr[6];
 };
 static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
 
 static struct spi_board_info spi0_board_info[] __initdata = {
 	{
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 4643ff5..c56ddac 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -105,7 +105,7 @@
 };
 
 static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2] = {
+static struct macb_platform_data __initdata eth_data[2] = {
 	{
 		/*
 		 * The MDIO pullups on STK1000 are a bit too weak for
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 86fab77..27bd6fb 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -50,7 +50,7 @@
 	u8 addr[6];
 };
 static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1] = {
+static struct macb_platform_data __initdata eth_data[1] = {
 	{
 		.phy_mask	= ~(1U << 1),
 	},
diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c
index da14fbd..9d1efd1 100644
--- a/arch/avr32/boards/hammerhead/setup.c
+++ b/arch/avr32/boards/hammerhead/setup.c
@@ -102,7 +102,7 @@
 };
 
 static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1];
+static struct macb_platform_data __initdata eth_data[1];
 
 /*
  * The next two functions should go away as the boot loader is
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index e61bc94..ed137e3 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -52,7 +52,7 @@
 };
 
 static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
 
 static int ads7846_get_pendown_state_PB26(void)
 {
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index c4da5cb..05358aa 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -86,7 +86,7 @@
 	u8 addr[6];
 };
 static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
 
 static struct spi_eeprom eeprom_25lc010 = {
 		.name = "25lc010",
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 7fbf0dc..402a7bb 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1067,7 +1067,7 @@
  * -------------------------------------------------------------------- */
 
 #ifdef CONFIG_CPU_AT32AP7000
-static struct eth_platform_data macb0_data;
+static struct macb_platform_data macb0_data;
 static struct resource macb0_resource[] = {
 	PBMEM(0xfff01800),
 	IRQ(25),
@@ -1076,7 +1076,7 @@
 DEV_CLK(hclk, macb0, hsb, 8);
 DEV_CLK(pclk, macb0, pbb, 6);
 
-static struct eth_platform_data macb1_data;
+static struct macb_platform_data macb1_data;
 static struct resource macb1_resource[] = {
 	PBMEM(0xfff01c00),
 	IRQ(26),
@@ -1086,7 +1086,7 @@
 DEV_CLK(pclk, macb1, pbb, 7);
 
 struct platform_device *__init
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+at32_add_device_eth(unsigned int id, struct macb_platform_data *data)
 {
 	struct platform_device *pdev;
 	u32 pin_mask;
@@ -1163,7 +1163,7 @@
 		return NULL;
 	}
 
-	memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+	memcpy(pdev->dev.platform_data, data, sizeof(struct macb_platform_data));
 	platform_device_register(pdev);
 
 	return pdev;
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 5d7ffca..67b111c 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -6,6 +6,7 @@
 
 #include <linux/types.h>
 #include <linux/serial.h>
+#include <linux/platform_data/macb.h>
 
 #define GPIO_PIN_NONE	(-1)
 
@@ -42,12 +43,8 @@
 void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
 struct platform_device *at32_add_device_usart(unsigned int id);
 
-struct eth_platform_data {
-	u32	phy_mask;
-	u8	is_rmii;
-};
 struct platform_device *
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
+at32_add_device_eth(unsigned int id, struct macb_platform_data *data);
 
 struct spi_board_info;
 struct platform_device *
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8482a23..aa0b94f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -141,6 +141,12 @@
 	help
 	  Say yes here to support the PrimeCell PL061 GPIO device
 
+config GPIO_PXA
+	bool "PXA GPIO support"
+	depends on ARCH_PXA || ARCH_MMP
+	help
+	  Say yes here to support the PXA GPIO device
+
 config GPIO_XILINX
 	bool "Xilinx GPIO support"
 	depends on PPC_OF || MICROBLAZE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 4e018d6..8ef9e9a 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -40,7 +40,7 @@
 obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
-obj-$(CONFIG_PLAT_PXA)		+= gpio-pxa.o
+obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
 obj-$(CONFIG_PLAT_SAMSUNG)	+= gpio-samsung.o
 obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index ee13771..b2d3ee1 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -11,14 +11,46 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
 #include <linux/slab.h>
 
-#include <mach/gpio-pxa.h>
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ *           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
+ * BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
+ * BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
+ * BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050
+ *
+ * BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
+ * BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
+ * BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150
+ *
+ * NOTE:
+ *   BANK 3 is only available on PXA27x and later processors.
+ *   BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPLR_OFFSET	0x00
+#define GPDR_OFFSET	0x0C
+#define GPSR_OFFSET	0x18
+#define GPCR_OFFSET	0x24
+#define GRER_OFFSET	0x30
+#define GFER_OFFSET	0x3C
+#define GEDR_OFFSET	0x48
+#define GAFR_OFFSET	0x54
+#define ED_MASK_OFFSET	0x9C	/* GPIO edge detection for AP side */
+
+#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 
 int pxa_last_gpio;
 
@@ -39,8 +71,20 @@
 #endif
 };
 
+enum {
+	PXA25X_GPIO = 0,
+	PXA26X_GPIO,
+	PXA27X_GPIO,
+	PXA3XX_GPIO,
+	PXA93X_GPIO,
+	MMP_GPIO = 0x10,
+	MMP2_GPIO,
+};
+
 static DEFINE_SPINLOCK(gpio_lock);
 static struct pxa_gpio_chip *pxa_gpio_chips;
+static int gpio_type;
+static void __iomem *gpio_reg_base;
 
 #define for_each_gpio_chip(i, c)			\
 	for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
@@ -55,6 +99,122 @@
 	return &pxa_gpio_chips[gpio_to_bank(gpio)];
 }
 
+static inline int gpio_is_pxa_type(int type)
+{
+	return (type & MMP_GPIO) == 0;
+}
+
+static inline int gpio_is_mmp_type(int type)
+{
+	return (type & MMP_GPIO) != 0;
+}
+
+/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(int gpio)
+{
+	if ((gpio_type == PXA26X_GPIO) && (gpio > 85))
+		return 1;
+	return 0;
+}
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+	struct pxa_gpio_chip *pxachip;
+	void __iomem *base;
+	unsigned long gafr = 0, gpdr = 0;
+	int ret, af = 0, dir = 0;
+
+	pxachip = gpio_to_pxachip(gpio);
+	base = gpio_chip_base(&pxachip->chip);
+	gpdr = readl_relaxed(base + GPDR_OFFSET);
+
+	switch (gpio_type) {
+	case PXA25X_GPIO:
+	case PXA26X_GPIO:
+	case PXA27X_GPIO:
+		gafr = readl_relaxed(base + GAFR_OFFSET);
+		af = (gafr >> ((gpio & 0xf) * 2)) & 0x3;
+		dir = gpdr & GPIO_bit(gpio);
+
+		if (__gpio_is_inverted(gpio))
+			ret = (af != 1) || (dir == 0);
+		else
+			ret = (af != 0) || (dir != 0);
+		break;
+	default:
+		ret = gpdr & GPIO_bit(gpio);
+		break;
+	}
+	return ret;
+}
+
+#ifdef CONFIG_ARCH_PXA
+static inline int __pxa_gpio_to_irq(int gpio)
+{
+	if (gpio_is_pxa_type(gpio_type))
+		return PXA_GPIO_TO_IRQ(gpio);
+	return -1;
+}
+
+static inline int __pxa_irq_to_gpio(int irq)
+{
+	if (gpio_is_pxa_type(gpio_type))
+		return irq - PXA_GPIO_TO_IRQ(0);
+	return -1;
+}
+#else
+static inline int __pxa_gpio_to_irq(int gpio) { return -1; }
+static inline int __pxa_irq_to_gpio(int irq) { return -1; }
+#endif
+
+#ifdef CONFIG_ARCH_MMP
+static inline int __mmp_gpio_to_irq(int gpio)
+{
+	if (gpio_is_mmp_type(gpio_type))
+		return MMP_GPIO_TO_IRQ(gpio);
+	return -1;
+}
+
+static inline int __mmp_irq_to_gpio(int irq)
+{
+	if (gpio_is_mmp_type(gpio_type))
+		return irq - MMP_GPIO_TO_IRQ(0);
+	return -1;
+}
+#else
+static inline int __mmp_gpio_to_irq(int gpio) { return -1; }
+static inline int __mmp_irq_to_gpio(int irq) { return -1; }
+#endif
+
+static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	int gpio, ret;
+
+	gpio = chip->base + offset;
+	ret = __pxa_gpio_to_irq(gpio);
+	if (ret >= 0)
+		return ret;
+	return __mmp_gpio_to_irq(gpio);
+}
+
+int pxa_irq_to_gpio(int irq)
+{
+	int ret;
+
+	ret = __pxa_irq_to_gpio(irq);
+	if (ret >= 0)
+		return ret;
+	return __mmp_irq_to_gpio(irq);
+}
+
 static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
 	void __iomem *base = gpio_chip_base(chip);
@@ -63,12 +223,12 @@
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	value = __raw_readl(base + GPDR_OFFSET);
+	value = readl_relaxed(base + GPDR_OFFSET);
 	if (__gpio_is_inverted(chip->base + offset))
 		value |= mask;
 	else
 		value &= ~mask;
-	__raw_writel(value, base + GPDR_OFFSET);
+	writel_relaxed(value, base + GPDR_OFFSET);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 	return 0;
@@ -81,16 +241,16 @@
 	uint32_t tmp, mask = 1 << offset;
 	unsigned long flags;
 
-	__raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+	writel_relaxed(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	tmp = __raw_readl(base + GPDR_OFFSET);
+	tmp = readl_relaxed(base + GPDR_OFFSET);
 	if (__gpio_is_inverted(chip->base + offset))
 		tmp &= ~mask;
 	else
 		tmp |= mask;
-	__raw_writel(tmp, base + GPDR_OFFSET);
+	writel_relaxed(tmp, base + GPDR_OFFSET);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 	return 0;
@@ -98,16 +258,16 @@
 
 static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+	return readl_relaxed(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
 }
 
 static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	__raw_writel(1 << offset, gpio_chip_base(chip) +
+	writel_relaxed(1 << offset, gpio_chip_base(chip) +
 				(value ? GPSR_OFFSET : GPCR_OFFSET));
 }
 
-static int __init pxa_init_gpio_chip(int gpio_end)
+static int __devinit pxa_init_gpio_chip(int gpio_end)
 {
 	int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
 	struct pxa_gpio_chip *chips;
@@ -122,7 +282,7 @@
 		struct gpio_chip *c = &chips[i].chip;
 
 		sprintf(chips[i].label, "gpio-%d", i);
-		chips[i].regbase = GPIO_BANK(i);
+		chips[i].regbase = gpio_reg_base + BANK_OFF(i);
 
 		c->base  = gpio;
 		c->label = chips[i].label;
@@ -131,6 +291,7 @@
 		c->direction_output = pxa_gpio_direction_output;
 		c->get = pxa_gpio_get;
 		c->set = pxa_gpio_set;
+		c->to_irq = pxa_gpio_to_irq;
 
 		/* number of GPIOs on last bank may be less than 32 */
 		c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
@@ -147,18 +308,18 @@
 {
 	uint32_t grer, gfer;
 
-	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
-	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+	grer = readl_relaxed(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+	gfer = readl_relaxed(c->regbase + GFER_OFFSET) & ~c->irq_mask;
 	grer |= c->irq_edge_rise & c->irq_mask;
 	gfer |= c->irq_edge_fall & c->irq_mask;
-	__raw_writel(grer, c->regbase + GRER_OFFSET);
-	__raw_writel(gfer, c->regbase + GFER_OFFSET);
+	writel_relaxed(grer, c->regbase + GRER_OFFSET);
+	writel_relaxed(gfer, c->regbase + GFER_OFFSET);
 }
 
 static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
 {
 	struct pxa_gpio_chip *c;
-	int gpio = irq_to_gpio(d->irq);
+	int gpio = pxa_irq_to_gpio(d->irq);
 	unsigned long gpdr, mask = GPIO_bit(gpio);
 
 	c = gpio_to_pxachip(gpio);
@@ -176,12 +337,12 @@
 		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+	gpdr = readl_relaxed(c->regbase + GPDR_OFFSET);
 
 	if (__gpio_is_inverted(gpio))
-		__raw_writel(gpdr | mask,  c->regbase + GPDR_OFFSET);
+		writel_relaxed(gpdr | mask,  c->regbase + GPDR_OFFSET);
 	else
-		__raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+		writel_relaxed(gpdr & ~mask, c->regbase + GPDR_OFFSET);
 
 	if (type & IRQ_TYPE_EDGE_RISING)
 		c->irq_edge_rise |= mask;
@@ -212,9 +373,9 @@
 		for_each_gpio_chip(gpio, c) {
 			gpio_base = c->chip.base;
 
-			gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+			gedr = readl_relaxed(c->regbase + GEDR_OFFSET);
 			gedr = gedr & c->irq_mask;
-			__raw_writel(gedr, c->regbase + GEDR_OFFSET);
+			writel_relaxed(gedr, c->regbase + GEDR_OFFSET);
 
 			n = find_first_bit(&gedr, BITS_PER_LONG);
 			while (n < BITS_PER_LONG) {
@@ -229,29 +390,29 @@
 
 static void pxa_ack_muxed_gpio(struct irq_data *d)
 {
-	int gpio = irq_to_gpio(d->irq);
+	int gpio = pxa_irq_to_gpio(d->irq);
 	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 
-	__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+	writel_relaxed(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
 }
 
 static void pxa_mask_muxed_gpio(struct irq_data *d)
 {
-	int gpio = irq_to_gpio(d->irq);
+	int gpio = pxa_irq_to_gpio(d->irq);
 	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 	uint32_t grer, gfer;
 
 	c->irq_mask &= ~GPIO_bit(gpio);
 
-	grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
-	gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
-	__raw_writel(grer, c->regbase + GRER_OFFSET);
-	__raw_writel(gfer, c->regbase + GFER_OFFSET);
+	grer = readl_relaxed(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+	gfer = readl_relaxed(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+	writel_relaxed(grer, c->regbase + GRER_OFFSET);
+	writel_relaxed(gfer, c->regbase + GFER_OFFSET);
 }
 
 static void pxa_unmask_muxed_gpio(struct irq_data *d)
 {
-	int gpio = irq_to_gpio(d->irq);
+	int gpio = pxa_irq_to_gpio(d->irq);
 	struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
 
 	c->irq_mask |= GPIO_bit(gpio);
@@ -266,34 +427,143 @@
 	.irq_set_type	= pxa_gpio_irq_type,
 };
 
-void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+static int pxa_gpio_nums(void)
+{
+	int count = 0;
+
+#ifdef CONFIG_ARCH_PXA
+	if (cpu_is_pxa25x()) {
+#ifdef CONFIG_CPU_PXA26x
+		count = 89;
+		gpio_type = PXA26X_GPIO;
+#elif defined(CONFIG_PXA25x)
+		count = 84;
+		gpio_type = PXA26X_GPIO;
+#endif /* CONFIG_CPU_PXA26x */
+	} else if (cpu_is_pxa27x()) {
+		count = 120;
+		gpio_type = PXA27X_GPIO;
+	} else if (cpu_is_pxa93x() || cpu_is_pxa95x()) {
+		count = 191;
+		gpio_type = PXA93X_GPIO;
+	} else if (cpu_is_pxa3xx()) {
+		count = 127;
+		gpio_type = PXA3XX_GPIO;
+	}
+#endif /* CONFIG_ARCH_PXA */
+
+#ifdef CONFIG_ARCH_MMP
+	if (cpu_is_pxa168() || cpu_is_pxa910()) {
+		count = 127;
+		gpio_type = MMP_GPIO;
+	} else if (cpu_is_mmp2()) {
+		count = 191;
+		gpio_type = MMP2_GPIO;
+	}
+#endif /* CONFIG_ARCH_MMP */
+	return count;
+}
+
+static int __devinit pxa_gpio_probe(struct platform_device *pdev)
 {
 	struct pxa_gpio_chip *c;
-	int gpio, irq;
+	struct resource *res;
+	struct clk *clk;
+	int gpio, irq, ret;
+	int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
 
-	pxa_last_gpio = end;
+	pxa_last_gpio = pxa_gpio_nums();
+	if (!pxa_last_gpio)
+		return -EINVAL;
+
+	irq0 = platform_get_irq_byname(pdev, "gpio0");
+	irq1 = platform_get_irq_byname(pdev, "gpio1");
+	irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
+	if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
+		|| (irq_mux <= 0))
+		return -EINVAL;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+	gpio_reg_base = ioremap(res->start, resource_size(res));
+	if (!gpio_reg_base)
+		return -EINVAL;
+
+	if (irq0 > 0)
+		gpio_offset = 2;
+
+	clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Error %ld to get gpio clock\n",
+			PTR_ERR(clk));
+		iounmap(gpio_reg_base);
+		return PTR_ERR(clk);
+	}
+	ret = clk_prepare(clk);
+	if (ret) {
+		clk_put(clk);
+		iounmap(gpio_reg_base);
+		return ret;
+	}
+	ret = clk_enable(clk);
+	if (ret) {
+		clk_unprepare(clk);
+		clk_put(clk);
+		iounmap(gpio_reg_base);
+		return ret;
+	}
 
 	/* Initialize GPIO chips */
-	pxa_init_gpio_chip(end);
+	pxa_init_gpio_chip(pxa_last_gpio);
 
 	/* clear all GPIO edge detects */
 	for_each_gpio_chip(gpio, c) {
-		__raw_writel(0, c->regbase + GFER_OFFSET);
-		__raw_writel(0, c->regbase + GRER_OFFSET);
-		__raw_writel(~0,c->regbase + GEDR_OFFSET);
+		writel_relaxed(0, c->regbase + GFER_OFFSET);
+		writel_relaxed(0, c->regbase + GRER_OFFSET);
+		writel_relaxed(~0,c->regbase + GEDR_OFFSET);
+		/* unmask GPIO edge detect for AP side */
+		if (gpio_is_mmp_type(gpio_type))
+			writel_relaxed(~0, c->regbase + ED_MASK_OFFSET);
 	}
 
-	for (irq  = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+#ifdef CONFIG_ARCH_PXA
+	irq = gpio_to_irq(0);
+	irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+				 handle_edge_irq);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	irq_set_chained_handler(IRQ_GPIO0, pxa_gpio_demux_handler);
+
+	irq = gpio_to_irq(1);
+	irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+				 handle_edge_irq);
+	set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler);
+#endif
+
+	for (irq  = gpio_to_irq(gpio_offset);
+		irq <= gpio_to_irq(pxa_last_gpio); irq++) {
 		irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
 					 handle_edge_irq);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 
-	/* Install handler for GPIO>=2 edge detect interrupts */
-	irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
-	pxa_muxed_gpio_chip.irq_set_wake = fn;
+	irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler);
+	return 0;
 }
 
+static struct platform_driver pxa_gpio_driver = {
+	.probe		= pxa_gpio_probe,
+	.driver		= {
+		.name	= "pxa-gpio",
+	},
+};
+
+static int __init pxa_gpio_init(void)
+{
+	return platform_driver_register(&pxa_gpio_driver);
+}
+postcore_initcall(pxa_gpio_init);
+
 #ifdef CONFIG_PM
 static int pxa_gpio_suspend(void)
 {
@@ -301,13 +571,13 @@
 	int gpio;
 
 	for_each_gpio_chip(gpio, c) {
-		c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
-		c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
-		c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
-		c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+		c->saved_gplr = readl_relaxed(c->regbase + GPLR_OFFSET);
+		c->saved_gpdr = readl_relaxed(c->regbase + GPDR_OFFSET);
+		c->saved_grer = readl_relaxed(c->regbase + GRER_OFFSET);
+		c->saved_gfer = readl_relaxed(c->regbase + GFER_OFFSET);
 
 		/* Clear GPIO transition detect bits */
-		__raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+		writel_relaxed(0xffffffff, c->regbase + GEDR_OFFSET);
 	}
 	return 0;
 }
@@ -319,12 +589,12 @@
 
 	for_each_gpio_chip(gpio, c) {
 		/* restore level with set/clear */
-		__raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
-		__raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+		writel_relaxed( c->saved_gplr, c->regbase + GPSR_OFFSET);
+		writel_relaxed(~c->saved_gplr, c->regbase + GPCR_OFFSET);
 
-		__raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
-		__raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
-		__raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+		writel_relaxed(c->saved_grer, c->regbase + GRER_OFFSET);
+		writel_relaxed(c->saved_gfer, c->regbase + GFER_OFFSET);
+		writel_relaxed(c->saved_gpdr, c->regbase + GPDR_OFFSET);
 	}
 }
 #else
@@ -336,3 +606,10 @@
 	.suspend	= pxa_gpio_suspend,
 	.resume		= pxa_gpio_resume,
 };
+
+static int __init pxa_gpio_sysinit(void)
+{
+	register_syscore_ops(&pxa_gpio_syscore_ops);
+	return 0;
+}
+postcore_initcall(pxa_gpio_sysinit);
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 46b6500..6381604 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -558,7 +558,7 @@
 	.functionality	= tegra_i2c_func,
 };
 
-static int tegra_i2c_probe(struct platform_device *pdev)
+static int __devinit tegra_i2c_probe(struct platform_device *pdev)
 {
 	struct tegra_i2c_dev *i2c_dev;
 	struct tegra_i2c_platform_data *pdata = pdev->dev.platform_data;
@@ -636,7 +636,10 @@
 			i2c_dev->bus_clk_rate = be32_to_cpup(prop);
 	}
 
-	if (pdev->id == 3)
+	if (pdev->dev.of_node)
+		i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
+						"nvidia,tegra20-i2c-dvc");
+	else if (pdev->id == 3)
 		i2c_dev->is_dvc = 1;
 	init_completion(&i2c_dev->msg_complete);
 
@@ -690,7 +693,7 @@
 	return ret;
 }
 
-static int tegra_i2c_remove(struct platform_device *pdev)
+static int __devexit tegra_i2c_remove(struct platform_device *pdev)
 {
 	struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 	i2c_del_adapter(&i2c_dev->adapter);
@@ -742,6 +745,7 @@
 /* Match table for of_platform binding */
 static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
 	{ .compatible = "nvidia,tegra20-i2c", },
+	{ .compatible = "nvidia,tegra20-i2c-dvc", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 86e1458..3f565ef 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -27,8 +27,9 @@
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
 #include <plat/usb.h>
+#include <linux/pm_runtime.h>
 
-#define USBHS_DRIVER_NAME	"usbhs-omap"
+#define USBHS_DRIVER_NAME	"usbhs_omap"
 #define OMAP_EHCI_DEVICE	"ehci-omap"
 #define OMAP_OHCI_DEVICE	"ohci-omap3"
 
@@ -147,9 +148,6 @@
 
 
 struct usbhs_hcd_omap {
-	struct clk			*usbhost_ick;
-	struct clk			*usbhost_hs_fck;
-	struct clk			*usbhost_fs_fck;
 	struct clk			*xclk60mhsp1_ck;
 	struct clk			*xclk60mhsp2_ck;
 	struct clk			*utmi_p1_fck;
@@ -159,8 +157,7 @@
 	struct clk			*usbhost_p2_fck;
 	struct clk			*usbtll_p2_fck;
 	struct clk			*init_60m_fclk;
-	struct clk			*usbtll_fck;
-	struct clk			*usbtll_ick;
+	struct clk			*ehci_logic_fck;
 
 	void __iomem			*uhh_base;
 	void __iomem			*tll_base;
@@ -169,7 +166,6 @@
 
 	u32				usbhs_rev;
 	spinlock_t			lock;
-	int				count;
 };
 /*-------------------------------------------------------------------------*/
 
@@ -319,269 +315,6 @@
 	return ret;
 }
 
-/**
- * usbhs_omap_probe - initialize TI-based HCDs
- *
- * Allocates basic resources for this USB host controller.
- */
-static int __devinit usbhs_omap_probe(struct platform_device *pdev)
-{
-	struct device			*dev =  &pdev->dev;
-	struct usbhs_omap_platform_data	*pdata = dev->platform_data;
-	struct usbhs_hcd_omap		*omap;
-	struct resource			*res;
-	int				ret = 0;
-	int				i;
-
-	if (!pdata) {
-		dev_err(dev, "Missing platform data\n");
-		ret = -ENOMEM;
-		goto end_probe;
-	}
-
-	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
-	if (!omap) {
-		dev_err(dev, "Memory allocation failed\n");
-		ret = -ENOMEM;
-		goto end_probe;
-	}
-
-	spin_lock_init(&omap->lock);
-
-	for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
-		omap->platdata.port_mode[i] = pdata->port_mode[i];
-
-	omap->platdata.ehci_data = pdata->ehci_data;
-	omap->platdata.ohci_data = pdata->ohci_data;
-
-	omap->usbhost_ick = clk_get(dev, "usbhost_ick");
-	if (IS_ERR(omap->usbhost_ick)) {
-		ret =  PTR_ERR(omap->usbhost_ick);
-		dev_err(dev, "usbhost_ick failed error:%d\n", ret);
-		goto err_end;
-	}
-
-	omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
-	if (IS_ERR(omap->usbhost_hs_fck)) {
-		ret = PTR_ERR(omap->usbhost_hs_fck);
-		dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
-		goto err_usbhost_ick;
-	}
-
-	omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
-	if (IS_ERR(omap->usbhost_fs_fck)) {
-		ret = PTR_ERR(omap->usbhost_fs_fck);
-		dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
-		goto err_usbhost_hs_fck;
-	}
-
-	omap->usbtll_fck = clk_get(dev, "usbtll_fck");
-	if (IS_ERR(omap->usbtll_fck)) {
-		ret = PTR_ERR(omap->usbtll_fck);
-		dev_err(dev, "usbtll_fck failed error:%d\n", ret);
-		goto err_usbhost_fs_fck;
-	}
-
-	omap->usbtll_ick = clk_get(dev, "usbtll_ick");
-	if (IS_ERR(omap->usbtll_ick)) {
-		ret = PTR_ERR(omap->usbtll_ick);
-		dev_err(dev, "usbtll_ick failed error:%d\n", ret);
-		goto err_usbtll_fck;
-	}
-
-	omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
-	if (IS_ERR(omap->utmi_p1_fck)) {
-		ret = PTR_ERR(omap->utmi_p1_fck);
-		dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret);
-		goto err_usbtll_ick;
-	}
-
-	omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
-	if (IS_ERR(omap->xclk60mhsp1_ck)) {
-		ret = PTR_ERR(omap->xclk60mhsp1_ck);
-		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
-		goto err_utmi_p1_fck;
-	}
-
-	omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
-	if (IS_ERR(omap->utmi_p2_fck)) {
-		ret = PTR_ERR(omap->utmi_p2_fck);
-		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
-		goto err_xclk60mhsp1_ck;
-	}
-
-	omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
-	if (IS_ERR(omap->xclk60mhsp2_ck)) {
-		ret = PTR_ERR(omap->xclk60mhsp2_ck);
-		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
-		goto err_utmi_p2_fck;
-	}
-
-	omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
-	if (IS_ERR(omap->usbhost_p1_fck)) {
-		ret = PTR_ERR(omap->usbhost_p1_fck);
-		dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
-		goto err_xclk60mhsp2_ck;
-	}
-
-	omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
-	if (IS_ERR(omap->usbtll_p1_fck)) {
-		ret = PTR_ERR(omap->usbtll_p1_fck);
-		dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
-		goto err_usbhost_p1_fck;
-	}
-
-	omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
-	if (IS_ERR(omap->usbhost_p2_fck)) {
-		ret = PTR_ERR(omap->usbhost_p2_fck);
-		dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
-		goto err_usbtll_p1_fck;
-	}
-
-	omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
-	if (IS_ERR(omap->usbtll_p2_fck)) {
-		ret = PTR_ERR(omap->usbtll_p2_fck);
-		dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
-		goto err_usbhost_p2_fck;
-	}
-
-	omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
-	if (IS_ERR(omap->init_60m_fclk)) {
-		ret = PTR_ERR(omap->init_60m_fclk);
-		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
-		goto err_usbtll_p2_fck;
-	}
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
-	if (!res) {
-		dev_err(dev, "UHH EHCI get resource failed\n");
-		ret = -ENODEV;
-		goto err_init_60m_fclk;
-	}
-
-	omap->uhh_base = ioremap(res->start, resource_size(res));
-	if (!omap->uhh_base) {
-		dev_err(dev, "UHH ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_init_60m_fclk;
-	}
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
-	if (!res) {
-		dev_err(dev, "UHH EHCI get resource failed\n");
-		ret = -ENODEV;
-		goto err_tll;
-	}
-
-	omap->tll_base = ioremap(res->start, resource_size(res));
-	if (!omap->tll_base) {
-		dev_err(dev, "TLL ioremap failed\n");
-		ret = -ENOMEM;
-		goto err_tll;
-	}
-
-	platform_set_drvdata(pdev, omap);
-
-	ret = omap_usbhs_alloc_children(pdev);
-	if (ret) {
-		dev_err(dev, "omap_usbhs_alloc_children failed\n");
-		goto err_alloc;
-	}
-
-	goto end_probe;
-
-err_alloc:
-	iounmap(omap->tll_base);
-
-err_tll:
-	iounmap(omap->uhh_base);
-
-err_init_60m_fclk:
-	clk_put(omap->init_60m_fclk);
-
-err_usbtll_p2_fck:
-	clk_put(omap->usbtll_p2_fck);
-
-err_usbhost_p2_fck:
-	clk_put(omap->usbhost_p2_fck);
-
-err_usbtll_p1_fck:
-	clk_put(omap->usbtll_p1_fck);
-
-err_usbhost_p1_fck:
-	clk_put(omap->usbhost_p1_fck);
-
-err_xclk60mhsp2_ck:
-	clk_put(omap->xclk60mhsp2_ck);
-
-err_utmi_p2_fck:
-	clk_put(omap->utmi_p2_fck);
-
-err_xclk60mhsp1_ck:
-	clk_put(omap->xclk60mhsp1_ck);
-
-err_utmi_p1_fck:
-	clk_put(omap->utmi_p1_fck);
-
-err_usbtll_ick:
-	clk_put(omap->usbtll_ick);
-
-err_usbtll_fck:
-	clk_put(omap->usbtll_fck);
-
-err_usbhost_fs_fck:
-	clk_put(omap->usbhost_fs_fck);
-
-err_usbhost_hs_fck:
-	clk_put(omap->usbhost_hs_fck);
-
-err_usbhost_ick:
-	clk_put(omap->usbhost_ick);
-
-err_end:
-	kfree(omap);
-
-end_probe:
-	return ret;
-}
-
-/**
- * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
- * @pdev: USB Host Controller being removed
- *
- * Reverses the effect of usbhs_omap_probe().
- */
-static int __devexit usbhs_omap_remove(struct platform_device *pdev)
-{
-	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
-
-	if (omap->count != 0) {
-		dev_err(&pdev->dev,
-			"Either EHCI or OHCI is still using usbhs core\n");
-		return -EBUSY;
-	}
-
-	iounmap(omap->tll_base);
-	iounmap(omap->uhh_base);
-	clk_put(omap->init_60m_fclk);
-	clk_put(omap->usbtll_p2_fck);
-	clk_put(omap->usbhost_p2_fck);
-	clk_put(omap->usbtll_p1_fck);
-	clk_put(omap->usbhost_p1_fck);
-	clk_put(omap->xclk60mhsp2_ck);
-	clk_put(omap->utmi_p2_fck);
-	clk_put(omap->xclk60mhsp1_ck);
-	clk_put(omap->utmi_p1_fck);
-	clk_put(omap->usbtll_ick);
-	clk_put(omap->usbtll_fck);
-	clk_put(omap->usbhost_fs_fck);
-	clk_put(omap->usbhost_hs_fck);
-	clk_put(omap->usbhost_ick);
-	kfree(omap);
-
-	return 0;
-}
-
 static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
 {
 	switch (pmode) {
@@ -689,30 +422,85 @@
 	}
 }
 
-static int usbhs_enable(struct device *dev)
+static int usbhs_runtime_resume(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
 	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
-	unsigned long			flags = 0;
-	int				ret = 0;
-	unsigned long			timeout;
-	unsigned			reg;
+	unsigned long			flags;
 
-	dev_dbg(dev, "starting TI HSUSB Controller\n");
+	dev_dbg(dev, "usbhs_runtime_resume\n");
+
 	if (!pdata) {
 		dev_dbg(dev, "missing platform_data\n");
 		return  -ENODEV;
 	}
 
 	spin_lock_irqsave(&omap->lock, flags);
-	if (omap->count > 0)
-		goto end_count;
 
-	clk_enable(omap->usbhost_ick);
-	clk_enable(omap->usbhost_hs_fck);
-	clk_enable(omap->usbhost_fs_fck);
-	clk_enable(omap->usbtll_fck);
-	clk_enable(omap->usbtll_ick);
+	if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
+		clk_enable(omap->ehci_logic_fck);
+
+	if (is_ehci_tll_mode(pdata->port_mode[0])) {
+		clk_enable(omap->usbhost_p1_fck);
+		clk_enable(omap->usbtll_p1_fck);
+	}
+	if (is_ehci_tll_mode(pdata->port_mode[1])) {
+		clk_enable(omap->usbhost_p2_fck);
+		clk_enable(omap->usbtll_p2_fck);
+	}
+	clk_enable(omap->utmi_p1_fck);
+	clk_enable(omap->utmi_p2_fck);
+
+	spin_unlock_irqrestore(&omap->lock, flags);
+
+	return 0;
+}
+
+static int usbhs_runtime_suspend(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
+	unsigned long			flags;
+
+	dev_dbg(dev, "usbhs_runtime_suspend\n");
+
+	if (!pdata) {
+		dev_dbg(dev, "missing platform_data\n");
+		return  -ENODEV;
+	}
+
+	spin_lock_irqsave(&omap->lock, flags);
+
+	if (is_ehci_tll_mode(pdata->port_mode[0])) {
+		clk_disable(omap->usbhost_p1_fck);
+		clk_disable(omap->usbtll_p1_fck);
+	}
+	if (is_ehci_tll_mode(pdata->port_mode[1])) {
+		clk_disable(omap->usbhost_p2_fck);
+		clk_disable(omap->usbtll_p2_fck);
+	}
+	clk_disable(omap->utmi_p2_fck);
+	clk_disable(omap->utmi_p1_fck);
+
+	if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
+		clk_disable(omap->ehci_logic_fck);
+
+	spin_unlock_irqrestore(&omap->lock, flags);
+
+	return 0;
+}
+
+static void omap_usbhs_init(struct device *dev)
+{
+	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
+	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
+	unsigned long			flags;
+	unsigned			reg;
+
+	dev_dbg(dev, "starting TI HSUSB Controller\n");
+
+	pm_runtime_get_sync(dev);
+	spin_lock_irqsave(&omap->lock, flags);
 
 	if (pdata->ehci_data->phy_reset) {
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
@@ -736,50 +524,6 @@
 	omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
 	dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
 
-	/* perform TLL soft reset, and wait until reset is complete */
-	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
-			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
-
-	/* Wait for TLL reset to complete */
-	timeout = jiffies + msecs_to_jiffies(1000);
-	while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
-			& OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout)) {
-			dev_dbg(dev, "operation timed out\n");
-			ret = -EINVAL;
-			goto err_tll;
-		}
-	}
-
-	dev_dbg(dev, "TLL RESET DONE\n");
-
-	/* (1<<3) = no idle mode only for initial debugging */
-	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
-			OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
-			OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
-			OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
-
-	/* Put UHH in NoIdle/NoStandby mode */
-	reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
-	if (is_omap_usbhs_rev1(omap)) {
-		reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
-				| OMAP_UHH_SYSCONFIG_SIDLEMODE
-				| OMAP_UHH_SYSCONFIG_CACTIVITY
-				| OMAP_UHH_SYSCONFIG_MIDLEMODE);
-		reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
-
-
-	} else if (is_omap_usbhs_rev2(omap)) {
-		reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
-		reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
-		reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
-		reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
-	}
-
-	usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
-
 	reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
 	/* setup ULPI bypass and burst configurations */
 	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
@@ -825,49 +569,6 @@
 		reg &= ~OMAP4_P1_MODE_CLEAR;
 		reg &= ~OMAP4_P2_MODE_CLEAR;
 
-		if (is_ehci_phy_mode(pdata->port_mode[0])) {
-			ret = clk_set_parent(omap->utmi_p1_fck,
-						omap->xclk60mhsp1_ck);
-			if (ret != 0) {
-				dev_err(dev, "xclk60mhsp1_ck set parent"
-				"failed error:%d\n", ret);
-				goto err_tll;
-			}
-		} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
-			ret = clk_set_parent(omap->utmi_p1_fck,
-						omap->init_60m_fclk);
-			if (ret != 0) {
-				dev_err(dev, "init_60m_fclk set parent"
-				"failed error:%d\n", ret);
-				goto err_tll;
-			}
-			clk_enable(omap->usbhost_p1_fck);
-			clk_enable(omap->usbtll_p1_fck);
-		}
-
-		if (is_ehci_phy_mode(pdata->port_mode[1])) {
-			ret = clk_set_parent(omap->utmi_p2_fck,
-						omap->xclk60mhsp2_ck);
-			if (ret != 0) {
-				dev_err(dev, "xclk60mhsp1_ck set parent"
-					"failed error:%d\n", ret);
-				goto err_tll;
-			}
-		} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
-			ret = clk_set_parent(omap->utmi_p2_fck,
-						omap->init_60m_fclk);
-			if (ret != 0) {
-				dev_err(dev, "init_60m_fclk set parent"
-				"failed error:%d\n", ret);
-				goto err_tll;
-			}
-			clk_enable(omap->usbhost_p2_fck);
-			clk_enable(omap->usbtll_p2_fck);
-		}
-
-		clk_enable(omap->utmi_p1_fck);
-		clk_enable(omap->utmi_p2_fck);
-
 		if (is_ehci_tll_mode(pdata->port_mode[0]) ||
 			(is_ohci_port(pdata->port_mode[0])))
 			reg |= OMAP4_P1_MODE_TLL;
@@ -913,106 +614,14 @@
 				(pdata->ehci_data->reset_gpio_port[1], 1);
 	}
 
-end_count:
-	omap->count++;
 	spin_unlock_irqrestore(&omap->lock, flags);
-	return 0;
-
-err_tll:
-	if (pdata->ehci_data->phy_reset) {
-		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
-			gpio_free(pdata->ehci_data->reset_gpio_port[0]);
-
-		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
-			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
-	}
-
-	clk_disable(omap->usbtll_ick);
-	clk_disable(omap->usbtll_fck);
-	clk_disable(omap->usbhost_fs_fck);
-	clk_disable(omap->usbhost_hs_fck);
-	clk_disable(omap->usbhost_ick);
-	spin_unlock_irqrestore(&omap->lock, flags);
-	return ret;
+	pm_runtime_put_sync(dev);
 }
 
-static void usbhs_disable(struct device *dev)
+static void omap_usbhs_deinit(struct device *dev)
 {
 	struct usbhs_hcd_omap		*omap = dev_get_drvdata(dev);
 	struct usbhs_omap_platform_data	*pdata = &omap->platdata;
-	unsigned long			flags = 0;
-	unsigned long			timeout;
-
-	dev_dbg(dev, "stopping TI HSUSB Controller\n");
-
-	spin_lock_irqsave(&omap->lock, flags);
-
-	if (omap->count == 0)
-		goto end_disble;
-
-	omap->count--;
-
-	if (omap->count != 0)
-		goto end_disble;
-
-	/* Reset OMAP modules for insmod/rmmod to work */
-	usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
-			is_omap_usbhs_rev2(omap) ?
-			OMAP4_UHH_SYSCONFIG_SOFTRESET :
-			OMAP_UHH_SYSCONFIG_SOFTRESET);
-
-	timeout = jiffies + msecs_to_jiffies(100);
-	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
-				& (1 << 0))) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(dev, "operation timed out\n");
-	}
-
-	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
-				& (1 << 1))) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(dev, "operation timed out\n");
-	}
-
-	while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
-				& (1 << 2))) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(dev, "operation timed out\n");
-	}
-
-	usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
-
-	while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
-				& (1 << 0))) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout))
-			dev_dbg(dev, "operation timed out\n");
-	}
-
-	if (is_omap_usbhs_rev2(omap)) {
-		if (is_ehci_tll_mode(pdata->port_mode[0]))
-			clk_disable(omap->usbtll_p1_fck);
-		if (is_ehci_tll_mode(pdata->port_mode[1]))
-			clk_disable(omap->usbtll_p2_fck);
-		clk_disable(omap->utmi_p2_fck);
-		clk_disable(omap->utmi_p1_fck);
-	}
-
-	clk_disable(omap->usbtll_ick);
-	clk_disable(omap->usbtll_fck);
-	clk_disable(omap->usbhost_fs_fck);
-	clk_disable(omap->usbhost_hs_fck);
-	clk_disable(omap->usbhost_ick);
-
-	/* The gpio_free migh sleep; so unlock the spinlock */
-	spin_unlock_irqrestore(&omap->lock, flags);
 
 	if (pdata->ehci_data->phy_reset) {
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
@@ -1021,28 +630,272 @@
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
 			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
 	}
-	return;
-
-end_disble:
-	spin_unlock_irqrestore(&omap->lock, flags);
 }
 
-int omap_usbhs_enable(struct device *dev)
+
+/**
+ * usbhs_omap_probe - initialize TI-based HCDs
+ *
+ * Allocates basic resources for this USB host controller.
+ */
+static int __devinit usbhs_omap_probe(struct platform_device *pdev)
 {
-	return  usbhs_enable(dev->parent);
-}
-EXPORT_SYMBOL_GPL(omap_usbhs_enable);
+	struct device			*dev =  &pdev->dev;
+	struct usbhs_omap_platform_data	*pdata = dev->platform_data;
+	struct usbhs_hcd_omap		*omap;
+	struct resource			*res;
+	int				ret = 0;
+	int				i;
 
-void omap_usbhs_disable(struct device *dev)
-{
-	usbhs_disable(dev->parent);
+	if (!pdata) {
+		dev_err(dev, "Missing platform data\n");
+		ret = -ENOMEM;
+		goto end_probe;
+	}
+
+	omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+	if (!omap) {
+		dev_err(dev, "Memory allocation failed\n");
+		ret = -ENOMEM;
+		goto end_probe;
+	}
+
+	spin_lock_init(&omap->lock);
+
+	for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+		omap->platdata.port_mode[i] = pdata->port_mode[i];
+
+	omap->platdata.ehci_data = pdata->ehci_data;
+	omap->platdata.ohci_data = pdata->ohci_data;
+
+	pm_runtime_enable(dev);
+
+
+	for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+		if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
+			is_ehci_hsic_mode(i)) {
+			omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
+			if (IS_ERR(omap->ehci_logic_fck)) {
+				ret = PTR_ERR(omap->ehci_logic_fck);
+				dev_warn(dev, "ehci_logic_fck failed:%d\n",
+					 ret);
+			}
+			break;
+		}
+
+	omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+	if (IS_ERR(omap->utmi_p1_fck)) {
+		ret = PTR_ERR(omap->utmi_p1_fck);
+		dev_err(dev, "utmi_p1_gfclk failed error:%d\n",	ret);
+		goto err_end;
+	}
+
+	omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+	if (IS_ERR(omap->xclk60mhsp1_ck)) {
+		ret = PTR_ERR(omap->xclk60mhsp1_ck);
+		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+		goto err_utmi_p1_fck;
+	}
+
+	omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+	if (IS_ERR(omap->utmi_p2_fck)) {
+		ret = PTR_ERR(omap->utmi_p2_fck);
+		dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+		goto err_xclk60mhsp1_ck;
+	}
+
+	omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+	if (IS_ERR(omap->xclk60mhsp2_ck)) {
+		ret = PTR_ERR(omap->xclk60mhsp2_ck);
+		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+		goto err_utmi_p2_fck;
+	}
+
+	omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+	if (IS_ERR(omap->usbhost_p1_fck)) {
+		ret = PTR_ERR(omap->usbhost_p1_fck);
+		dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+		goto err_xclk60mhsp2_ck;
+	}
+
+	omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
+	if (IS_ERR(omap->usbtll_p1_fck)) {
+		ret = PTR_ERR(omap->usbtll_p1_fck);
+		dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
+		goto err_usbhost_p1_fck;
+	}
+
+	omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+	if (IS_ERR(omap->usbhost_p2_fck)) {
+		ret = PTR_ERR(omap->usbhost_p2_fck);
+		dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+		goto err_usbtll_p1_fck;
+	}
+
+	omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
+	if (IS_ERR(omap->usbtll_p2_fck)) {
+		ret = PTR_ERR(omap->usbtll_p2_fck);
+		dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
+		goto err_usbhost_p2_fck;
+	}
+
+	omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
+	if (IS_ERR(omap->init_60m_fclk)) {
+		ret = PTR_ERR(omap->init_60m_fclk);
+		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+		goto err_usbtll_p2_fck;
+	}
+
+	if (is_ehci_phy_mode(pdata->port_mode[0])) {
+		/* for OMAP3 , the clk set paretn fails */
+		ret = clk_set_parent(omap->utmi_p1_fck,
+					omap->xclk60mhsp1_ck);
+		if (ret != 0)
+			dev_err(dev, "xclk60mhsp1_ck set parent"
+				"failed error:%d\n", ret);
+	} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
+		ret = clk_set_parent(omap->utmi_p1_fck,
+					omap->init_60m_fclk);
+		if (ret != 0)
+			dev_err(dev, "init_60m_fclk set parent"
+				"failed error:%d\n", ret);
+	}
+
+	if (is_ehci_phy_mode(pdata->port_mode[1])) {
+		ret = clk_set_parent(omap->utmi_p2_fck,
+					omap->xclk60mhsp2_ck);
+		if (ret != 0)
+			dev_err(dev, "xclk60mhsp2_ck set parent"
+					"failed error:%d\n", ret);
+	} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
+		ret = clk_set_parent(omap->utmi_p2_fck,
+						omap->init_60m_fclk);
+		if (ret != 0)
+			dev_err(dev, "init_60m_fclk set parent"
+				"failed error:%d\n", ret);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
+	if (!res) {
+		dev_err(dev, "UHH EHCI get resource failed\n");
+		ret = -ENODEV;
+		goto err_init_60m_fclk;
+	}
+
+	omap->uhh_base = ioremap(res->start, resource_size(res));
+	if (!omap->uhh_base) {
+		dev_err(dev, "UHH ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_init_60m_fclk;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
+	if (!res) {
+		dev_err(dev, "UHH EHCI get resource failed\n");
+		ret = -ENODEV;
+		goto err_tll;
+	}
+
+	omap->tll_base = ioremap(res->start, resource_size(res));
+	if (!omap->tll_base) {
+		dev_err(dev, "TLL ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_tll;
+	}
+
+	platform_set_drvdata(pdev, omap);
+
+	ret = omap_usbhs_alloc_children(pdev);
+	if (ret) {
+		dev_err(dev, "omap_usbhs_alloc_children failed\n");
+		goto err_alloc;
+	}
+
+	omap_usbhs_init(dev);
+
+	goto end_probe;
+
+err_alloc:
+	iounmap(omap->tll_base);
+
+err_tll:
+	iounmap(omap->uhh_base);
+
+err_init_60m_fclk:
+	clk_put(omap->init_60m_fclk);
+
+err_usbtll_p2_fck:
+	clk_put(omap->usbtll_p2_fck);
+
+err_usbhost_p2_fck:
+	clk_put(omap->usbhost_p2_fck);
+
+err_usbtll_p1_fck:
+	clk_put(omap->usbtll_p1_fck);
+
+err_usbhost_p1_fck:
+	clk_put(omap->usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+	clk_put(omap->xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+	clk_put(omap->utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+	clk_put(omap->xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+	clk_put(omap->utmi_p1_fck);
+
+err_end:
+	clk_put(omap->ehci_logic_fck);
+	pm_runtime_disable(dev);
+	kfree(omap);
+
+end_probe:
+	return ret;
 }
-EXPORT_SYMBOL_GPL(omap_usbhs_disable);
+
+/**
+ * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usbhs_omap_probe().
+ */
+static int __devexit usbhs_omap_remove(struct platform_device *pdev)
+{
+	struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+
+	omap_usbhs_deinit(&pdev->dev);
+	iounmap(omap->tll_base);
+	iounmap(omap->uhh_base);
+	clk_put(omap->init_60m_fclk);
+	clk_put(omap->usbtll_p2_fck);
+	clk_put(omap->usbhost_p2_fck);
+	clk_put(omap->usbtll_p1_fck);
+	clk_put(omap->usbhost_p1_fck);
+	clk_put(omap->xclk60mhsp2_ck);
+	clk_put(omap->utmi_p2_fck);
+	clk_put(omap->xclk60mhsp1_ck);
+	clk_put(omap->utmi_p1_fck);
+	clk_put(omap->ehci_logic_fck);
+	pm_runtime_disable(&pdev->dev);
+	kfree(omap);
+
+	return 0;
+}
+
+static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
+	.runtime_suspend	= usbhs_runtime_suspend,
+	.runtime_resume		= usbhs_runtime_resume,
+};
 
 static struct platform_driver usbhs_omap_driver = {
 	.driver = {
 		.name		= (char *)usbhs_driver_name,
 		.owner		= THIS_MODULE,
+		.pm		= &usbhsomap_dev_pm_ops,
 	},
 	.remove		= __exit_p(usbhs_omap_remove),
 };
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index d5fe43d..d1fb561 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1991,6 +1991,8 @@
 	if (mmc_slot(host).nonremovable)
 		mmc->caps |= MMC_CAP_NONREMOVABLE;
 
+	mmc->pm_caps = mmc_slot(host).pm_caps;
+
 	omap_hsmmc_conf_bus_power(host);
 
 	/* Select DMA lines */
@@ -2179,13 +2181,7 @@
 		cancel_work_sync(&host->mmc_carddetect_work);
 		ret = mmc_suspend_host(host->mmc);
 
-		if (ret == 0) {
-			omap_hsmmc_disable_irq(host);
-			OMAP_HSMMC_WRITE(host->base, HCTL,
-				OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
-			if (host->got_dbclk)
-				clk_disable(host->dbclk);
-		} else {
+		if (ret) {
 			host->suspended = 0;
 			if (host->pdata->resume) {
 				ret = host->pdata->resume(&pdev->dev,
@@ -2194,9 +2190,20 @@
 					dev_dbg(mmc_dev(host->mmc),
 						"Unmask interrupt failed\n");
 			}
+			goto err;
 		}
-		pm_runtime_put_sync(host->dev);
+
+		if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) {
+			omap_hsmmc_disable_irq(host);
+			OMAP_HSMMC_WRITE(host->base, HCTL,
+				OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
+		}
+		if (host->got_dbclk)
+			clk_disable(host->dbclk);
+
 	}
+err:
+	pm_runtime_put_sync(host->dev);
 	return ret;
 }
 
@@ -2216,7 +2223,8 @@
 		if (host->got_dbclk)
 			clk_enable(host->dbclk);
 
-		omap_hsmmc_conf_bus_power(host);
+		if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
+			omap_hsmmc_conf_bus_power(host);
 
 		if (host->pdata->resume) {
 			ret = host->pdata->resume(&pdev->dev, host->slot_id);
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index be5dde0..94b7f28 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -10,7 +10,7 @@
 obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
 obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
-obj-$(CONFIG_NET_ATMEL) += cadence/
+obj-$(CONFIG_NET_CADENCE) += cadence/
 obj-$(CONFIG_NET_BFIN) += adi/
 obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index b48378a..db93191 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -5,8 +5,8 @@
 config HAVE_NET_MACB
 	bool
 
-config NET_ATMEL
-	bool "Atmel devices"
+config NET_CADENCE
+	bool "Cadence devices"
 	default y
 	depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
 	---help---
@@ -21,7 +21,7 @@
 	  the remaining Atmel network card questions. If you say Y, you will be
 	  asked for your specific card in the following questions.
 
-if NET_ATMEL
+if NET_CADENCE
 
 config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
@@ -33,14 +33,16 @@
 	  ethernet support, then you should always answer Y to this.
 
 config MACB
-	tristate "Atmel MACB support"
+	tristate "Cadence MACB/GEM support"
 	depends on HAVE_NET_MACB
 	select PHYLIB
 	---help---
-	  The Atmel MACB ethernet interface is found on many AT32 and AT91
-	  parts. Say Y to include support for the MACB chip.
+	  The Cadence MACB ethernet interface is found on many Atmel AT32 and
+	  AT91 parts.  This driver also supports the Cadence GEM (Gigabit
+	  Ethernet MAC found in some ARM SoC devices).  Note: the Gigabit mode
+	  is not yet supported.  Say Y to include support for the MACB/GEM chip.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called macb.
 
-endif # NET_ATMEL
+endif # NET_CADENCE
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index 56624d3..1a5b6ef 100644
--- a/drivers/net/ethernet/cadence/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -26,6 +26,7 @@
 #include <linux/skbuff.h>
 #include <linux/dma-mapping.h>
 #include <linux/ethtool.h>
+#include <linux/platform_data/macb.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/gfp.h>
@@ -255,8 +256,7 @@
 	unsigned int dsintr, irq_number;
 	int status;
 
-	irq_number = lp->board_data.phy_irq_pin;
-	if (!irq_number) {
+	if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
 		/*
 		 * PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
 		 * or board does not have it connected.
@@ -265,6 +265,7 @@
 		return;
 	}
 
+	irq_number = lp->board_data.phy_irq_pin;
 	status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev);
 	if (status) {
 		printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status);
@@ -319,8 +320,7 @@
 	unsigned int dsintr;
 	unsigned int irq_number;
 
-	irq_number = lp->board_data.phy_irq_pin;
-	if (!irq_number) {
+	if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
 		del_timer_sync(&lp->check_timer);
 		return;
 	}
@@ -365,6 +365,7 @@
 	disable_mdi();
 	spin_unlock_irq(&lp->lock);
 
+	irq_number = lp->board_data.phy_irq_pin;
 	free_irq(irq_number, dev);			/* Free interrupt handler */
 }
 
@@ -984,7 +985,7 @@
 static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address,
 			struct platform_device *pdev, struct clk *ether_clk)
 {
-	struct at91_eth_data *board_data = pdev->dev.platform_data;
+	struct macb_platform_data *board_data = pdev->dev.platform_data;
 	struct net_device *dev;
 	struct at91_private *lp;
 	unsigned int val;
@@ -1077,7 +1078,7 @@
 	netif_carrier_off(dev);		/* will be enabled in open() */
 
 	/* If board has no PHY IRQ, use a timer to poll the PHY */
-	if (!lp->board_data.phy_irq_pin) {
+	if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
 		init_timer(&lp->check_timer);
 		lp->check_timer.data = (unsigned long)dev;
 		lp->check_timer.function = at91ether_check_link;
@@ -1169,7 +1170,8 @@
 	struct net_device *dev = platform_get_drvdata(pdev);
 	struct at91_private *lp = netdev_priv(dev);
 
-	if (lp->board_data.phy_irq_pin >= 32)
+	if (gpio_is_valid(lp->board_data.phy_irq_pin) &&
+	    lp->board_data.phy_irq_pin >= 32)
 		gpio_free(lp->board_data.phy_irq_pin);
 
 	unregister_netdev(dev);
@@ -1188,11 +1190,12 @@
 {
 	struct net_device *net_dev = platform_get_drvdata(pdev);
 	struct at91_private *lp = netdev_priv(net_dev);
-	int phy_irq = lp->board_data.phy_irq_pin;
 
 	if (netif_running(net_dev)) {
-		if (phy_irq)
+		if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
+			int phy_irq = lp->board_data.phy_irq_pin;
 			disable_irq(phy_irq);
+		}
 
 		netif_stop_queue(net_dev);
 		netif_device_detach(net_dev);
@@ -1206,7 +1209,6 @@
 {
 	struct net_device *net_dev = platform_get_drvdata(pdev);
 	struct at91_private *lp = netdev_priv(net_dev);
-	int phy_irq = lp->board_data.phy_irq_pin;
 
 	if (netif_running(net_dev)) {
 		clk_enable(lp->ether_clk);
@@ -1214,8 +1216,10 @@
 		netif_device_attach(net_dev);
 		netif_start_queue(net_dev);
 
-		if (phy_irq)
+		if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
+			int phy_irq = lp->board_data.phy_irq_pin;
 			enable_irq(phy_irq);
+		}
 	}
 	return 0;
 }
diff --git a/drivers/net/ethernet/cadence/at91_ether.h b/drivers/net/ethernet/cadence/at91_ether.h
index 353f4da..3725fbb0 100644
--- a/drivers/net/ethernet/cadence/at91_ether.h
+++ b/drivers/net/ethernet/cadence/at91_ether.h
@@ -85,7 +85,9 @@
 struct at91_private
 {
 	struct mii_if_info mii;			/* ethtool support */
-	struct at91_eth_data board_data;	/* board-specific configuration */
+	struct macb_platform_data board_data;	/* board-specific
+						 * configuration (shared with
+						 * macb for common data */
 	struct clk *ether_clk;			/* clock */
 
 	/* PHY */
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index a437b46..f3d5c65 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -1,5 +1,5 @@
 /*
- * Atmel MACB Ethernet Controller driver
+ * Cadence MACB/GEM Ethernet Controller driver
  *
  * Copyright (C) 2004-2006 Atmel Corporation
  *
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -19,11 +20,12 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/dma-mapping.h>
+#include <linux/platform_data/macb.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
 
 #include "macb.h"
 
@@ -60,9 +62,9 @@
 	u16 top;
 
 	bottom = cpu_to_le32(*((u32 *)bp->dev->dev_addr));
-	macb_writel(bp, SA1B, bottom);
+	macb_or_gem_writel(bp, SA1B, bottom);
 	top = cpu_to_le16(*((u16 *)(bp->dev->dev_addr + 4)));
-	macb_writel(bp, SA1T, top);
+	macb_or_gem_writel(bp, SA1T, top);
 }
 
 static void __init macb_get_hwaddr(struct macb *bp)
@@ -71,8 +73,8 @@
 	u16 top;
 	u8 addr[6];
 
-	bottom = macb_readl(bp, SA1B);
-	top = macb_readl(bp, SA1T);
+	bottom = macb_or_gem_readl(bp, SA1B);
+	top = macb_or_gem_readl(bp, SA1T);
 
 	addr[0] = bottom & 0xff;
 	addr[1] = (bottom >> 8) & 0xff;
@@ -84,7 +86,7 @@
 	if (is_valid_ether_addr(addr)) {
 		memcpy(bp->dev->dev_addr, addr, sizeof(addr));
 	} else {
-		dev_info(&bp->pdev->dev, "invalid hw address, using random\n");
+		netdev_info(bp->dev, "invalid hw address, using random\n");
 		random_ether_addr(bp->dev->dev_addr);
 	}
 }
@@ -178,11 +180,12 @@
 
 	if (status_change) {
 		if (phydev->link)
-			printk(KERN_INFO "%s: link up (%d/%s)\n",
-			       dev->name, phydev->speed,
-			       DUPLEX_FULL == phydev->duplex ? "Full":"Half");
+			netdev_info(dev, "link up (%d/%s)\n",
+				    phydev->speed,
+				    phydev->duplex == DUPLEX_FULL ?
+				    "Full" : "Half");
 		else
-			printk(KERN_INFO "%s: link down\n", dev->name);
+			netdev_info(dev, "link down\n");
 	}
 }
 
@@ -191,25 +194,21 @@
 {
 	struct macb *bp = netdev_priv(dev);
 	struct phy_device *phydev;
-	struct eth_platform_data *pdata;
 	int ret;
 
 	phydev = phy_find_first(bp->mii_bus);
 	if (!phydev) {
-		printk (KERN_ERR "%s: no PHY found\n", dev->name);
+		netdev_err(dev, "no PHY found\n");
 		return -1;
 	}
 
-	pdata = bp->pdev->dev.platform_data;
 	/* TODO : add pin_irq */
 
 	/* attach the mac to the phy */
 	ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, 0,
-				 pdata && pdata->is_rmii ?
-				 PHY_INTERFACE_MODE_RMII :
-				 PHY_INTERFACE_MODE_MII);
+				 bp->phy_interface);
 	if (ret) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+		netdev_err(dev, "Could not attach to PHY\n");
 		return ret;
 	}
 
@@ -228,7 +227,7 @@
 
 static int macb_mii_init(struct macb *bp)
 {
-	struct eth_platform_data *pdata;
+	struct macb_platform_data *pdata;
 	int err = -ENXIO, i;
 
 	/* Enable management port */
@@ -285,8 +284,8 @@
 static void macb_update_stats(struct macb *bp)
 {
 	u32 __iomem *reg = bp->regs + MACB_PFR;
-	u32 *p = &bp->hw_stats.rx_pause_frames;
-	u32 *end = &bp->hw_stats.tx_pause_frames + 1;
+	u32 *p = &bp->hw_stats.macb.rx_pause_frames;
+	u32 *end = &bp->hw_stats.macb.tx_pause_frames + 1;
 
 	WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4);
 
@@ -303,14 +302,13 @@
 	status = macb_readl(bp, TSR);
 	macb_writel(bp, TSR, status);
 
-	dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n",
-		(unsigned long)status);
+	netdev_dbg(bp->dev, "macb_tx status = %02lx\n", (unsigned long)status);
 
 	if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) {
 		int i;
-		printk(KERN_ERR "%s: TX %s, resetting buffers\n",
-			bp->dev->name, status & MACB_BIT(UND) ?
-			"underrun" : "retry limit exceeded");
+		netdev_err(bp->dev, "TX %s, resetting buffers\n",
+			   status & MACB_BIT(UND) ?
+			   "underrun" : "retry limit exceeded");
 
 		/* Transfer ongoing, disable transmitter, to avoid confusion */
 		if (status & MACB_BIT(TGO))
@@ -369,8 +367,8 @@
 		if (!(bufstat & MACB_BIT(TX_USED)))
 			break;
 
-		dev_dbg(&bp->pdev->dev, "skb %u (data %p) TX complete\n",
-			tail, skb->data);
+		netdev_dbg(bp->dev, "skb %u (data %p) TX complete\n",
+			   tail, skb->data);
 		dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len,
 				 DMA_TO_DEVICE);
 		bp->stats.tx_packets++;
@@ -395,8 +393,8 @@
 
 	len = MACB_BFEXT(RX_FRMLEN, bp->rx_ring[last_frag].ctrl);
 
-	dev_dbg(&bp->pdev->dev, "macb_rx_frame frags %u - %u (len %u)\n",
-		first_frag, last_frag, len);
+	netdev_dbg(bp->dev, "macb_rx_frame frags %u - %u (len %u)\n",
+		   first_frag, last_frag, len);
 
 	skb = dev_alloc_skb(len + RX_OFFSET);
 	if (!skb) {
@@ -437,8 +435,8 @@
 
 	bp->stats.rx_packets++;
 	bp->stats.rx_bytes += len;
-	dev_dbg(&bp->pdev->dev, "received skb of length %u, csum: %08x\n",
-		skb->len, skb->csum);
+	netdev_dbg(bp->dev, "received skb of length %u, csum: %08x\n",
+		   skb->len, skb->csum);
 	netif_receive_skb(skb);
 
 	return 0;
@@ -515,8 +513,8 @@
 
 	work_done = 0;
 
-	dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n",
-		(unsigned long)status, budget);
+	netdev_dbg(bp->dev, "poll: status = %08lx, budget = %d\n",
+		   (unsigned long)status, budget);
 
 	work_done = macb_rx(bp, budget);
 	if (work_done < budget) {
@@ -565,8 +563,7 @@
 			macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
 
 			if (napi_schedule_prep(&bp->napi)) {
-				dev_dbg(&bp->pdev->dev,
-					"scheduling RX softirq\n");
+				netdev_dbg(bp->dev, "scheduling RX softirq\n");
 				__napi_schedule(&bp->napi);
 			}
 		}
@@ -582,16 +579,19 @@
 
 		if (status & MACB_BIT(ISR_ROVR)) {
 			/* We missed at least one packet */
-			bp->hw_stats.rx_overruns++;
+			if (macb_is_gem(bp))
+				bp->hw_stats.gem.rx_overruns++;
+			else
+				bp->hw_stats.macb.rx_overruns++;
 		}
 
 		if (status & MACB_BIT(HRESP)) {
 			/*
-			 * TODO: Reset the hardware, and maybe move the printk
-			 * to a lower-priority context as well (work queue?)
+			 * TODO: Reset the hardware, and maybe move the
+			 * netdev_err to a lower-priority context as well
+			 * (work queue?)
 			 */
-			printk(KERN_ERR "%s: DMA bus error: HRESP not OK\n",
-			       dev->name);
+			netdev_err(dev, "DMA bus error: HRESP not OK\n");
 		}
 
 		status = macb_readl(bp, ISR);
@@ -626,16 +626,12 @@
 	unsigned long flags;
 
 #ifdef DEBUG
-	int i;
-	dev_dbg(&bp->pdev->dev,
-		"start_xmit: len %u head %p data %p tail %p end %p\n",
-		skb->len, skb->head, skb->data,
-		skb_tail_pointer(skb), skb_end_pointer(skb));
-	dev_dbg(&bp->pdev->dev,
-		"data:");
-	for (i = 0; i < 16; i++)
-		printk(" %02x", (unsigned int)skb->data[i]);
-	printk("\n");
+	netdev_dbg(bp->dev,
+		   "start_xmit: len %u head %p data %p tail %p end %p\n",
+		   skb->len, skb->head, skb->data,
+		   skb_tail_pointer(skb), skb_end_pointer(skb));
+	print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1,
+		       skb->data, 16, true);
 #endif
 
 	len = skb->len;
@@ -645,21 +641,20 @@
 	if (TX_BUFFS_AVAIL(bp) < 1) {
 		netif_stop_queue(dev);
 		spin_unlock_irqrestore(&bp->lock, flags);
-		dev_err(&bp->pdev->dev,
-			"BUG! Tx Ring full when queue awake!\n");
-		dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
-			bp->tx_head, bp->tx_tail);
+		netdev_err(bp->dev, "BUG! Tx Ring full when queue awake!\n");
+		netdev_dbg(bp->dev, "tx_head = %u, tx_tail = %u\n",
+			   bp->tx_head, bp->tx_tail);
 		return NETDEV_TX_BUSY;
 	}
 
 	entry = bp->tx_head;
-	dev_dbg(&bp->pdev->dev, "Allocated ring entry %u\n", entry);
+	netdev_dbg(bp->dev, "Allocated ring entry %u\n", entry);
 	mapping = dma_map_single(&bp->pdev->dev, skb->data,
 				 len, DMA_TO_DEVICE);
 	bp->tx_skb[entry].skb = skb;
 	bp->tx_skb[entry].mapping = mapping;
-	dev_dbg(&bp->pdev->dev, "Mapped skb data %p to DMA addr %08lx\n",
-		skb->data, (unsigned long)mapping);
+	netdev_dbg(bp->dev, "Mapped skb data %p to DMA addr %08lx\n",
+		   skb->data, (unsigned long)mapping);
 
 	ctrl = MACB_BF(TX_FRMLEN, len);
 	ctrl |= MACB_BIT(TX_LAST);
@@ -723,27 +718,27 @@
 					 &bp->rx_ring_dma, GFP_KERNEL);
 	if (!bp->rx_ring)
 		goto out_err;
-	dev_dbg(&bp->pdev->dev,
-		"Allocated RX ring of %d bytes at %08lx (mapped %p)\n",
-		size, (unsigned long)bp->rx_ring_dma, bp->rx_ring);
+	netdev_dbg(bp->dev,
+		   "Allocated RX ring of %d bytes at %08lx (mapped %p)\n",
+		   size, (unsigned long)bp->rx_ring_dma, bp->rx_ring);
 
 	size = TX_RING_BYTES;
 	bp->tx_ring = dma_alloc_coherent(&bp->pdev->dev, size,
 					 &bp->tx_ring_dma, GFP_KERNEL);
 	if (!bp->tx_ring)
 		goto out_err;
-	dev_dbg(&bp->pdev->dev,
-		"Allocated TX ring of %d bytes at %08lx (mapped %p)\n",
-		size, (unsigned long)bp->tx_ring_dma, bp->tx_ring);
+	netdev_dbg(bp->dev,
+		   "Allocated TX ring of %d bytes at %08lx (mapped %p)\n",
+		   size, (unsigned long)bp->tx_ring_dma, bp->tx_ring);
 
 	size = RX_RING_SIZE * RX_BUFFER_SIZE;
 	bp->rx_buffers = dma_alloc_coherent(&bp->pdev->dev, size,
 					    &bp->rx_buffers_dma, GFP_KERNEL);
 	if (!bp->rx_buffers)
 		goto out_err;
-	dev_dbg(&bp->pdev->dev,
-		"Allocated RX buffers of %d bytes at %08lx (mapped %p)\n",
-		size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers);
+	netdev_dbg(bp->dev,
+		   "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n",
+		   size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers);
 
 	return 0;
 
@@ -797,6 +792,84 @@
 	macb_readl(bp, ISR);
 }
 
+static u32 gem_mdc_clk_div(struct macb *bp)
+{
+	u32 config;
+	unsigned long pclk_hz = clk_get_rate(bp->pclk);
+
+	if (pclk_hz <= 20000000)
+		config = GEM_BF(CLK, GEM_CLK_DIV8);
+	else if (pclk_hz <= 40000000)
+		config = GEM_BF(CLK, GEM_CLK_DIV16);
+	else if (pclk_hz <= 80000000)
+		config = GEM_BF(CLK, GEM_CLK_DIV32);
+	else if (pclk_hz <= 120000000)
+		config = GEM_BF(CLK, GEM_CLK_DIV48);
+	else if (pclk_hz <= 160000000)
+		config = GEM_BF(CLK, GEM_CLK_DIV64);
+	else
+		config = GEM_BF(CLK, GEM_CLK_DIV96);
+
+	return config;
+}
+
+static u32 macb_mdc_clk_div(struct macb *bp)
+{
+	u32 config;
+	unsigned long pclk_hz;
+
+	if (macb_is_gem(bp))
+		return gem_mdc_clk_div(bp);
+
+	pclk_hz = clk_get_rate(bp->pclk);
+	if (pclk_hz <= 20000000)
+		config = MACB_BF(CLK, MACB_CLK_DIV8);
+	else if (pclk_hz <= 40000000)
+		config = MACB_BF(CLK, MACB_CLK_DIV16);
+	else if (pclk_hz <= 80000000)
+		config = MACB_BF(CLK, MACB_CLK_DIV32);
+	else
+		config = MACB_BF(CLK, MACB_CLK_DIV64);
+
+	return config;
+}
+
+/*
+ * Get the DMA bus width field of the network configuration register that we
+ * should program.  We find the width from decoding the design configuration
+ * register to find the maximum supported data bus width.
+ */
+static u32 macb_dbw(struct macb *bp)
+{
+	if (!macb_is_gem(bp))
+		return 0;
+
+	switch (GEM_BFEXT(DBWDEF, gem_readl(bp, DCFG1))) {
+	case 4:
+		return GEM_BF(DBW, GEM_DBW128);
+	case 2:
+		return GEM_BF(DBW, GEM_DBW64);
+	case 1:
+	default:
+		return GEM_BF(DBW, GEM_DBW32);
+	}
+}
+
+/*
+ * Configure the receive DMA engine to use the correct receive buffer size.
+ * This is a configurable parameter for GEM.
+ */
+static void macb_configure_dma(struct macb *bp)
+{
+	u32 dmacfg;
+
+	if (macb_is_gem(bp)) {
+		dmacfg = gem_readl(bp, DMACFG) & ~GEM_BF(RXBS, -1L);
+		dmacfg |= GEM_BF(RXBS, RX_BUFFER_SIZE / 64);
+		gem_writel(bp, DMACFG, dmacfg);
+	}
+}
+
 static void macb_init_hw(struct macb *bp)
 {
 	u32 config;
@@ -804,7 +877,7 @@
 	macb_reset_hw(bp);
 	__macb_set_hwaddr(bp);
 
-	config = macb_readl(bp, NCFGR) & MACB_BF(CLK, -1L);
+	config = macb_mdc_clk_div(bp);
 	config |= MACB_BIT(PAE);		/* PAuse Enable */
 	config |= MACB_BIT(DRFCS);		/* Discard Rx FCS */
 	config |= MACB_BIT(BIG);		/* Receive oversized frames */
@@ -812,8 +885,11 @@
 		config |= MACB_BIT(CAF);	/* Copy All Frames */
 	if (!(bp->dev->flags & IFF_BROADCAST))
 		config |= MACB_BIT(NBC);	/* No BroadCast */
+	config |= macb_dbw(bp);
 	macb_writel(bp, NCFGR, config);
 
+	macb_configure_dma(bp);
+
 	/* Initialize TX and RX buffers */
 	macb_writel(bp, RBQP, bp->rx_ring_dma);
 	macb_writel(bp, TBQP, bp->tx_ring_dma);
@@ -909,8 +985,8 @@
 		mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
 	}
 
-	macb_writel(bp, HRB, mc_filter[0]);
-	macb_writel(bp, HRT, mc_filter[1]);
+	macb_or_gem_writel(bp, HRB, mc_filter[0]);
+	macb_or_gem_writel(bp, HRT, mc_filter[1]);
 }
 
 /*
@@ -932,8 +1008,8 @@
 
 	if (dev->flags & IFF_ALLMULTI) {
 		/* Enable all multicast mode */
-		macb_writel(bp, HRB, -1);
-		macb_writel(bp, HRT, -1);
+		macb_or_gem_writel(bp, HRB, -1);
+		macb_or_gem_writel(bp, HRT, -1);
 		cfg |= MACB_BIT(NCFGR_MTI);
 	} else if (!netdev_mc_empty(dev)) {
 		/* Enable specific multicasts */
@@ -941,8 +1017,8 @@
 		cfg |= MACB_BIT(NCFGR_MTI);
 	} else if (dev->flags & (~IFF_ALLMULTI)) {
 		/* Disable all multicast mode */
-		macb_writel(bp, HRB, 0);
-		macb_writel(bp, HRT, 0);
+		macb_or_gem_writel(bp, HRB, 0);
+		macb_or_gem_writel(bp, HRT, 0);
 		cfg &= ~MACB_BIT(NCFGR_MTI);
 	}
 
@@ -954,7 +1030,7 @@
 	struct macb *bp = netdev_priv(dev);
 	int err;
 
-	dev_dbg(&bp->pdev->dev, "open\n");
+	netdev_dbg(bp->dev, "open\n");
 
 	/* if the phy is not yet register, retry later*/
 	if (!bp->phy_dev)
@@ -965,9 +1041,8 @@
 
 	err = macb_alloc_consistent(bp);
 	if (err) {
-		printk(KERN_ERR
-		       "%s: Unable to allocate DMA memory (error %d)\n",
-		       dev->name, err);
+		netdev_err(dev, "Unable to allocate DMA memory (error %d)\n",
+			   err);
 		return err;
 	}
 
@@ -1005,11 +1080,62 @@
 	return 0;
 }
 
+static void gem_update_stats(struct macb *bp)
+{
+	u32 __iomem *reg = bp->regs + GEM_OTX;
+	u32 *p = &bp->hw_stats.gem.tx_octets_31_0;
+	u32 *end = &bp->hw_stats.gem.rx_udp_checksum_errors + 1;
+
+	for (; p < end; p++, reg++)
+		*p += __raw_readl(reg);
+}
+
+static struct net_device_stats *gem_get_stats(struct macb *bp)
+{
+	struct gem_stats *hwstat = &bp->hw_stats.gem;
+	struct net_device_stats *nstat = &bp->stats;
+
+	gem_update_stats(bp);
+
+	nstat->rx_errors = (hwstat->rx_frame_check_sequence_errors +
+			    hwstat->rx_alignment_errors +
+			    hwstat->rx_resource_errors +
+			    hwstat->rx_overruns +
+			    hwstat->rx_oversize_frames +
+			    hwstat->rx_jabbers +
+			    hwstat->rx_undersized_frames +
+			    hwstat->rx_length_field_frame_errors);
+	nstat->tx_errors = (hwstat->tx_late_collisions +
+			    hwstat->tx_excessive_collisions +
+			    hwstat->tx_underrun +
+			    hwstat->tx_carrier_sense_errors);
+	nstat->multicast = hwstat->rx_multicast_frames;
+	nstat->collisions = (hwstat->tx_single_collision_frames +
+			     hwstat->tx_multiple_collision_frames +
+			     hwstat->tx_excessive_collisions);
+	nstat->rx_length_errors = (hwstat->rx_oversize_frames +
+				   hwstat->rx_jabbers +
+				   hwstat->rx_undersized_frames +
+				   hwstat->rx_length_field_frame_errors);
+	nstat->rx_over_errors = hwstat->rx_resource_errors;
+	nstat->rx_crc_errors = hwstat->rx_frame_check_sequence_errors;
+	nstat->rx_frame_errors = hwstat->rx_alignment_errors;
+	nstat->rx_fifo_errors = hwstat->rx_overruns;
+	nstat->tx_aborted_errors = hwstat->tx_excessive_collisions;
+	nstat->tx_carrier_errors = hwstat->tx_carrier_sense_errors;
+	nstat->tx_fifo_errors = hwstat->tx_underrun;
+
+	return nstat;
+}
+
 static struct net_device_stats *macb_get_stats(struct net_device *dev)
 {
 	struct macb *bp = netdev_priv(dev);
 	struct net_device_stats *nstat = &bp->stats;
-	struct macb_stats *hwstat = &bp->hw_stats;
+	struct macb_stats *hwstat = &bp->hw_stats.macb;
+
+	if (macb_is_gem(bp))
+		return gem_get_stats(bp);
 
 	/* read stats from hardware */
 	macb_update_stats(bp);
@@ -1117,14 +1243,59 @@
 #endif
 };
 
+#if defined(CONFIG_OF)
+static const struct of_device_id macb_dt_ids[] = {
+	{ .compatible = "cdns,at32ap7000-macb" },
+	{ .compatible = "cdns,at91sam9260-macb" },
+	{ .compatible = "cdns,macb" },
+	{ .compatible = "cdns,pc302-gem" },
+	{ .compatible = "cdns,gem" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, macb_dt_ids);
+
+static int __devinit macb_get_phy_mode_dt(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+
+	if (np)
+		return of_get_phy_mode(np);
+
+	return -ENODEV;
+}
+
+static int __devinit macb_get_hwaddr_dt(struct macb *bp)
+{
+	struct device_node *np = bp->pdev->dev.of_node;
+	if (np) {
+		const char *mac = of_get_mac_address(np);
+		if (mac) {
+			memcpy(bp->dev->dev_addr, mac, ETH_ALEN);
+			return 0;
+		}
+	}
+
+	return -ENODEV;
+}
+#else
+static int __devinit macb_get_phy_mode_dt(struct platform_device *pdev)
+{
+	return -ENODEV;
+}
+static int __devinit macb_get_hwaddr_dt(struct macb *bp)
+{
+	return -ENODEV;
+}
+#endif
+
 static int __init macb_probe(struct platform_device *pdev)
 {
-	struct eth_platform_data *pdata;
+	struct macb_platform_data *pdata;
 	struct resource *regs;
 	struct net_device *dev;
 	struct macb *bp;
 	struct phy_device *phydev;
-	unsigned long pclk_hz;
 	u32 config;
 	int err = -ENXIO;
 
@@ -1152,28 +1323,19 @@
 
 	spin_lock_init(&bp->lock);
 
-#if defined(CONFIG_ARCH_AT91)
-	bp->pclk = clk_get(&pdev->dev, "macb_clk");
+	bp->pclk = clk_get(&pdev->dev, "pclk");
 	if (IS_ERR(bp->pclk)) {
 		dev_err(&pdev->dev, "failed to get macb_clk\n");
 		goto err_out_free_dev;
 	}
 	clk_enable(bp->pclk);
-#else
-	bp->pclk = clk_get(&pdev->dev, "pclk");
-	if (IS_ERR(bp->pclk)) {
-		dev_err(&pdev->dev, "failed to get pclk\n");
-		goto err_out_free_dev;
-	}
+
 	bp->hclk = clk_get(&pdev->dev, "hclk");
 	if (IS_ERR(bp->hclk)) {
 		dev_err(&pdev->dev, "failed to get hclk\n");
 		goto err_out_put_pclk;
 	}
-
-	clk_enable(bp->pclk);
 	clk_enable(bp->hclk);
-#endif
 
 	bp->regs = ioremap(regs->start, resource_size(regs));
 	if (!bp->regs) {
@@ -1185,9 +1347,8 @@
 	dev->irq = platform_get_irq(pdev, 0);
 	err = request_irq(dev->irq, macb_interrupt, 0, dev->name, dev);
 	if (err) {
-		printk(KERN_ERR
-		       "%s: Unable to request IRQ %d (error %d)\n",
-		       dev->name, dev->irq, err);
+		dev_err(&pdev->dev, "Unable to request IRQ %d (error %d)\n",
+			dev->irq, err);
 		goto err_out_iounmap;
 	}
 
@@ -1198,31 +1359,37 @@
 	dev->base_addr = regs->start;
 
 	/* Set MII management clock divider */
-	pclk_hz = clk_get_rate(bp->pclk);
-	if (pclk_hz <= 20000000)
-		config = MACB_BF(CLK, MACB_CLK_DIV8);
-	else if (pclk_hz <= 40000000)
-		config = MACB_BF(CLK, MACB_CLK_DIV16);
-	else if (pclk_hz <= 80000000)
-		config = MACB_BF(CLK, MACB_CLK_DIV32);
-	else
-		config = MACB_BF(CLK, MACB_CLK_DIV64);
+	config = macb_mdc_clk_div(bp);
+	config |= macb_dbw(bp);
 	macb_writel(bp, NCFGR, config);
 
-	macb_get_hwaddr(bp);
-	pdata = pdev->dev.platform_data;
+	err = macb_get_hwaddr_dt(bp);
+	if (err < 0)
+		macb_get_hwaddr(bp);
 
-	if (pdata && pdata->is_rmii)
+	err = macb_get_phy_mode_dt(pdev);
+	if (err < 0) {
+		pdata = pdev->dev.platform_data;
+		if (pdata && pdata->is_rmii)
+			bp->phy_interface = PHY_INTERFACE_MODE_RMII;
+		else
+			bp->phy_interface = PHY_INTERFACE_MODE_MII;
+	} else {
+		bp->phy_interface = err;
+	}
+
+	if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
 #if defined(CONFIG_ARCH_AT91)
-		macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
+		macb_or_gem_writel(bp, USRIO, (MACB_BIT(RMII) |
+					       MACB_BIT(CLKEN)));
 #else
-		macb_writel(bp, USRIO, 0);
+		macb_or_gem_writel(bp, USRIO, 0);
 #endif
 	else
 #if defined(CONFIG_ARCH_AT91)
-		macb_writel(bp, USRIO, MACB_BIT(CLKEN));
+		macb_or_gem_writel(bp, USRIO, MACB_BIT(CLKEN));
 #else
-		macb_writel(bp, USRIO, MACB_BIT(MII));
+		macb_or_gem_writel(bp, USRIO, MACB_BIT(MII));
 #endif
 
 	bp->tx_pending = DEF_TX_RING_PENDING;
@@ -1239,13 +1406,13 @@
 
 	platform_set_drvdata(pdev, dev);
 
-	printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d (%pM)\n",
-	       dev->name, dev->base_addr, dev->irq, dev->dev_addr);
+	netdev_info(dev, "Cadence %s at 0x%08lx irq %d (%pM)\n",
+		    macb_is_gem(bp) ? "GEM" : "MACB", dev->base_addr,
+		    dev->irq, dev->dev_addr);
 
 	phydev = bp->phy_dev;
-	printk(KERN_INFO "%s: attached PHY driver [%s] "
-		"(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
-		phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
+	netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+		    phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
 
 	return 0;
 
@@ -1256,14 +1423,10 @@
 err_out_iounmap:
 	iounmap(bp->regs);
 err_out_disable_clocks:
-#ifndef CONFIG_ARCH_AT91
 	clk_disable(bp->hclk);
 	clk_put(bp->hclk);
-#endif
 	clk_disable(bp->pclk);
-#ifndef CONFIG_ARCH_AT91
 err_out_put_pclk:
-#endif
 	clk_put(bp->pclk);
 err_out_free_dev:
 	free_netdev(dev);
@@ -1289,10 +1452,8 @@
 		unregister_netdev(dev);
 		free_irq(dev->irq, dev);
 		iounmap(bp->regs);
-#ifndef CONFIG_ARCH_AT91
 		clk_disable(bp->hclk);
 		clk_put(bp->hclk);
-#endif
 		clk_disable(bp->pclk);
 		clk_put(bp->pclk);
 		free_netdev(dev);
@@ -1310,9 +1471,7 @@
 
 	netif_device_detach(netdev);
 
-#ifndef CONFIG_ARCH_AT91
 	clk_disable(bp->hclk);
-#endif
 	clk_disable(bp->pclk);
 
 	return 0;
@@ -1324,9 +1483,7 @@
 	struct macb *bp = netdev_priv(netdev);
 
 	clk_enable(bp->pclk);
-#ifndef CONFIG_ARCH_AT91
 	clk_enable(bp->hclk);
-#endif
 
 	netif_device_attach(netdev);
 
@@ -1344,6 +1501,7 @@
 	.driver		= {
 		.name		= "macb",
 		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(macb_dt_ids),
 	},
 };
 
@@ -1361,6 +1519,6 @@
 module_exit(macb_exit);
 
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Atmel MACB Ethernet driver");
+MODULE_DESCRIPTION("Cadence MACB/GEM Ethernet driver");
 MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
 MODULE_ALIAS("platform:macb");
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index d3212f6..335e288 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -59,6 +59,24 @@
 #define MACB_TPQ				0x00bc
 #define MACB_USRIO				0x00c0
 #define MACB_WOL				0x00c4
+#define MACB_MID				0x00fc
+
+/* GEM register offsets. */
+#define GEM_NCFGR				0x0004
+#define GEM_USRIO				0x000c
+#define GEM_DMACFG				0x0010
+#define GEM_HRB					0x0080
+#define GEM_HRT					0x0084
+#define GEM_SA1B				0x0088
+#define GEM_SA1T				0x008C
+#define GEM_OTX					0x0100
+#define GEM_DCFG1				0x0280
+#define GEM_DCFG2				0x0284
+#define GEM_DCFG3				0x0288
+#define GEM_DCFG4				0x028c
+#define GEM_DCFG5				0x0290
+#define GEM_DCFG6				0x0294
+#define GEM_DCFG7				0x0298
 
 /* Bitfields in NCR */
 #define MACB_LB_OFFSET				0
@@ -126,6 +144,21 @@
 #define MACB_IRXFCS_OFFSET			19
 #define MACB_IRXFCS_SIZE			1
 
+/* GEM specific NCFGR bitfields. */
+#define GEM_CLK_OFFSET				18
+#define GEM_CLK_SIZE				3
+#define GEM_DBW_OFFSET				21
+#define GEM_DBW_SIZE				2
+
+/* Constants for data bus width. */
+#define GEM_DBW32				0
+#define GEM_DBW64				1
+#define GEM_DBW128				2
+
+/* Bitfields in DMACFG. */
+#define GEM_RXBS_OFFSET				16
+#define GEM_RXBS_SIZE				8
+
 /* Bitfields in NSR */
 #define MACB_NSR_LINK_OFFSET			0
 #define MACB_NSR_LINK_SIZE			1
@@ -228,12 +261,30 @@
 #define MACB_WOL_MTI_OFFSET			19
 #define MACB_WOL_MTI_SIZE			1
 
+/* Bitfields in MID */
+#define MACB_IDNUM_OFFSET			16
+#define MACB_IDNUM_SIZE				16
+#define MACB_REV_OFFSET				0
+#define MACB_REV_SIZE				16
+
+/* Bitfields in DCFG1. */
+#define GEM_DBWDEF_OFFSET			25
+#define GEM_DBWDEF_SIZE				3
+
 /* Constants for CLK */
 #define MACB_CLK_DIV8				0
 #define MACB_CLK_DIV16				1
 #define MACB_CLK_DIV32				2
 #define MACB_CLK_DIV64				3
 
+/* GEM specific constants for CLK. */
+#define GEM_CLK_DIV8				0
+#define GEM_CLK_DIV16				1
+#define GEM_CLK_DIV32				2
+#define GEM_CLK_DIV48				3
+#define GEM_CLK_DIV64				4
+#define GEM_CLK_DIV96				5
+
 /* Constants for MAN register */
 #define MACB_MAN_SOF				1
 #define MACB_MAN_WRITE				1
@@ -254,11 +305,52 @@
 		    << MACB_##name##_OFFSET))		\
 	 | MACB_BF(name,value))
 
+#define GEM_BIT(name)					\
+	(1 << GEM_##name##_OFFSET)
+#define GEM_BF(name, value)				\
+	(((value) & ((1 << GEM_##name##_SIZE) - 1))	\
+	 << GEM_##name##_OFFSET)
+#define GEM_BFEXT(name, value)\
+	(((value) >> GEM_##name##_OFFSET)		\
+	 & ((1 << GEM_##name##_SIZE) - 1))
+#define GEM_BFINS(name, value, old)			\
+	(((old) & ~(((1 << GEM_##name##_SIZE) - 1)	\
+		    << GEM_##name##_OFFSET))		\
+	 | GEM_BF(name, value))
+
 /* Register access macros */
 #define macb_readl(port,reg)				\
 	__raw_readl((port)->regs + MACB_##reg)
 #define macb_writel(port,reg,value)			\
 	__raw_writel((value), (port)->regs + MACB_##reg)
+#define gem_readl(port, reg)				\
+	__raw_readl((port)->regs + GEM_##reg)
+#define gem_writel(port, reg, value)			\
+	__raw_writel((value), (port)->regs + GEM_##reg)
+
+/*
+ * Conditional GEM/MACB macros.  These perform the operation to the correct
+ * register dependent on whether the device is a GEM or a MACB.  For registers
+ * and bitfields that are common across both devices, use macb_{read,write}l
+ * to avoid the cost of the conditional.
+ */
+#define macb_or_gem_writel(__bp, __reg, __value) \
+	({ \
+		if (macb_is_gem((__bp))) \
+			gem_writel((__bp), __reg, __value); \
+		else \
+			macb_writel((__bp), __reg, __value); \
+	})
+
+#define macb_or_gem_readl(__bp, __reg) \
+	({ \
+		u32 __v; \
+		if (macb_is_gem((__bp))) \
+			__v = gem_readl((__bp), __reg); \
+		else \
+			__v = macb_readl((__bp), __reg); \
+		__v; \
+	})
 
 struct dma_desc {
 	u32	addr;
@@ -358,6 +450,54 @@
 	u32	tx_pause_frames;
 };
 
+struct gem_stats {
+	u32	tx_octets_31_0;
+	u32	tx_octets_47_32;
+	u32	tx_frames;
+	u32	tx_broadcast_frames;
+	u32	tx_multicast_frames;
+	u32	tx_pause_frames;
+	u32	tx_64_byte_frames;
+	u32	tx_65_127_byte_frames;
+	u32	tx_128_255_byte_frames;
+	u32	tx_256_511_byte_frames;
+	u32	tx_512_1023_byte_frames;
+	u32	tx_1024_1518_byte_frames;
+	u32	tx_greater_than_1518_byte_frames;
+	u32	tx_underrun;
+	u32	tx_single_collision_frames;
+	u32	tx_multiple_collision_frames;
+	u32	tx_excessive_collisions;
+	u32	tx_late_collisions;
+	u32	tx_deferred_frames;
+	u32	tx_carrier_sense_errors;
+	u32	rx_octets_31_0;
+	u32	rx_octets_47_32;
+	u32	rx_frames;
+	u32	rx_broadcast_frames;
+	u32	rx_multicast_frames;
+	u32	rx_pause_frames;
+	u32	rx_64_byte_frames;
+	u32	rx_65_127_byte_frames;
+	u32	rx_128_255_byte_frames;
+	u32	rx_256_511_byte_frames;
+	u32	rx_512_1023_byte_frames;
+	u32	rx_1024_1518_byte_frames;
+	u32	rx_greater_than_1518_byte_frames;
+	u32	rx_undersized_frames;
+	u32	rx_oversize_frames;
+	u32	rx_jabbers;
+	u32	rx_frame_check_sequence_errors;
+	u32	rx_length_field_frame_errors;
+	u32	rx_symbol_errors;
+	u32	rx_alignment_errors;
+	u32	rx_resource_errors;
+	u32	rx_overruns;
+	u32	rx_ip_header_checksum_errors;
+	u32	rx_tcp_checksum_errors;
+	u32	rx_udp_checksum_errors;
+};
+
 struct macb {
 	void __iomem		*regs;
 
@@ -376,7 +516,10 @@
 	struct net_device	*dev;
 	struct napi_struct	napi;
 	struct net_device_stats	stats;
-	struct macb_stats	hw_stats;
+	union {
+		struct macb_stats	macb;
+		struct gem_stats	gem;
+	}			hw_stats;
 
 	dma_addr_t		rx_ring_dma;
 	dma_addr_t		tx_ring_dma;
@@ -389,6 +532,13 @@
 	unsigned int 		link;
 	unsigned int 		speed;
 	unsigned int 		duplex;
+
+	phy_interface_t		phy_interface;
 };
 
+static inline bool macb_is_gem(struct macb *bp)
+{
+	return MACB_BFEXT(IDNUM, macb_readl(bp, MID)) == 0x2;
+}
+
 #endif /* _MACB_H */
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
index 0b4f946..31ab6ddf 100644
--- a/drivers/pcmcia/pxa2xx_cm_x255.c
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -16,8 +16,6 @@
 #include <linux/gpio.h>
 #include <linux/export.h>
 
-#include <asm/mach-types.h>
-
 #include "soc_common.h"
 
 #define GPIO_PCMCIA_SKTSEL	(54)
@@ -27,15 +25,15 @@
 #define GPIO_PCMCIA_S1_RDYINT	(8)
 #define GPIO_PCMCIA_RESET	(9)
 
-#define PCMCIA_S0_CD_VALID	IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
-#define PCMCIA_S1_CD_VALID	IRQ_GPIO(GPIO_PCMCIA_S1_CD_VALID)
-#define PCMCIA_S0_RDYINT	IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
-#define PCMCIA_S1_RDYINT	IRQ_GPIO(GPIO_PCMCIA_S1_RDYINT)
+#define PCMCIA_S0_CD_VALID	gpio_to_irq(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S1_CD_VALID	gpio_to_irq(GPIO_PCMCIA_S1_CD_VALID)
+#define PCMCIA_S0_RDYINT	gpio_to_irq(GPIO_PCMCIA_S0_RDYINT)
+#define PCMCIA_S1_RDYINT	gpio_to_irq(GPIO_PCMCIA_S1_RDYINT)
 
 
 static struct pcmcia_irqs irqs[] = {
-	{ 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
-	{ 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
+	{ .sock = 0, .str = "PCMCIA0 CD" },
+	{ .sock = 1, .str = "PCMCIA1 CD" },
 };
 
 static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -46,6 +44,8 @@
 	gpio_direction_output(GPIO_PCMCIA_RESET, 0);
 
 	skt->socket.pci_irq = skt->nr == 0 ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
+	irqs[0].irq = PCMCIA_S0_CD_VALID;
+	irqs[1].irq = PCMCIA_S1_CD_VALID;
 	ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 	if (!ret)
 		gpio_free(GPIO_PCMCIA_RESET);
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index 923f315..3dc7621 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -16,20 +16,18 @@
 #include <linux/gpio.h>
 #include <linux/export.h>
 
-#include <asm/mach-types.h>
-
 #include "soc_common.h"
 
 #define GPIO_PCMCIA_S0_CD_VALID	(84)
 #define GPIO_PCMCIA_S0_RDYINT	(82)
 #define GPIO_PCMCIA_RESET	(53)
 
-#define PCMCIA_S0_CD_VALID	IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
-#define PCMCIA_S0_RDYINT	IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
+#define PCMCIA_S0_CD_VALID	gpio_to_irq(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S0_RDYINT	gpio_to_irq(GPIO_PCMCIA_S0_RDYINT)
 
 
 static struct pcmcia_irqs irqs[] = {
-	{ 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
+	{ .sock = 0, .str = "PCMCIA0 CD" },
 };
 
 static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -40,6 +38,7 @@
 	gpio_direction_output(GPIO_PCMCIA_RESET, 0);
 
 	skt->socket.pci_irq = PCMCIA_S0_RDYINT;
+	irqs[0].irq = PCMCIA_S0_CD_VALID;
 	ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
 	if (!ret)
 		gpio_free(GPIO_PCMCIA_RESET);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index e39b029..568cefb 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -41,6 +41,7 @@
 #include <linux/usb/ulpi.h>
 #include <plat/usb.h>
 #include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
 
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
@@ -190,11 +191,8 @@
 		}
 	}
 
-	ret = omap_usbhs_enable(dev);
-	if (ret) {
-		dev_err(dev, "failed to start usbhs with err %d\n", ret);
-		goto err_enable;
-	}
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
 
 	/*
 	 * An undocumented "feature" in the OMAP3 EHCI controller,
@@ -240,11 +238,8 @@
 	return 0;
 
 err_add_hcd:
-	omap_usbhs_disable(dev);
-
-err_enable:
 	disable_put_regulator(pdata);
-	usb_put_hcd(hcd);
+	pm_runtime_put_sync(dev);
 
 err_io:
 	iounmap(regs);
@@ -266,10 +261,12 @@
 	struct usb_hcd *hcd	= dev_get_drvdata(dev);
 
 	usb_remove_hcd(hcd);
-	omap_usbhs_disable(dev);
 	disable_put_regulator(dev->platform_data);
 	iounmap(hcd->regs);
 	usb_put_hcd(hcd);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
 	return 0;
 }
 
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 516ebc4..1b8133b 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -31,6 +31,7 @@
 
 #include <linux/platform_device.h>
 #include <plat/usb.h>
+#include <linux/pm_runtime.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -134,7 +135,7 @@
 	int			irq;
 
 	if (usb_disabled())
-		goto err_end;
+		return -ENODEV;
 
 	if (!dev->parent) {
 		dev_err(dev, "Missing parent device\n");
@@ -172,11 +173,8 @@
 	hcd->rsrc_len = resource_size(res);
 	hcd->regs =  regs;
 
-	ret = omap_usbhs_enable(dev);
-	if (ret) {
-		dev_dbg(dev, "failed to start ohci\n");
-		goto err_end;
-	}
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
@@ -189,9 +187,7 @@
 	return 0;
 
 err_add_hcd:
-	omap_usbhs_disable(dev);
-
-err_end:
+	pm_runtime_put_sync(dev);
 	usb_put_hcd(hcd);
 
 err_io:
@@ -220,9 +216,9 @@
 
 	iounmap(hcd->regs);
 	usb_remove_hcd(hcd);
-	omap_usbhs_disable(dev);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 	usb_put_hcd(hcd);
-
 	return 0;
 }
 
diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h
new file mode 100644
index 0000000..05071ee
--- /dev/null
+++ b/include/linux/gpio-pxa.h
@@ -0,0 +1,16 @@
+#ifndef __GPIO_PXA_H
+#define __GPIO_PXA_H
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+#define gpio_to_bank(gpio)	((gpio) >> 5)
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+extern int pxa_irq_to_gpio(int irq);
+
+#endif /* __GPIO_PXA_H */
diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h
new file mode 100644
index 0000000..e7c748f
--- /dev/null
+++ b/include/linux/platform_data/macb.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACB_PDATA_H__
+#define __MACB_PDATA_H__
+
+struct macb_platform_data {
+	u32		phy_mask;
+	u8		phy_irq_pin;	/* PHY IRQ */
+	u8		is_rmii;	/* using RMII interface? */
+};
+
+#endif /* __MACB_PDATA_H__ */
diff --git a/include/sound/saif.h b/include/sound/saif.h
index d0e0de7..f22f3e1 100644
--- a/include/sound/saif.h
+++ b/include/sound/saif.h
@@ -10,7 +10,7 @@
 #define __SOUND_SAIF_H__
 
 struct mxs_saif_platform_data {
-	int (*init) (void);
-	int (*get_master_id) (unsigned int saif_id);
+	bool master_mode;	/* if true use master mode */
+	int master_id;		/* id of the master if in slave mode */
 };
 #endif
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index 76dc74d..1ef697f 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -625,13 +625,6 @@
 	if (pdev->id >= ARRAY_SIZE(mxs_saif))
 		return -EINVAL;
 
-	pdata = pdev->dev.platform_data;
-	if (pdata && pdata->init) {
-		ret = pdata->init();
-		if (ret)
-			return ret;
-	}
-
 	saif = kzalloc(sizeof(*saif), GFP_KERNEL);
 	if (!saif)
 		return -ENOMEM;
@@ -639,12 +632,17 @@
 	mxs_saif[pdev->id] = saif;
 	saif->id = pdev->id;
 
-	saif->master_id = saif->id;
-	if (pdata && pdata->get_master_id) {
-		saif->master_id = pdata->get_master_id(saif->id);
+	pdata = pdev->dev.platform_data;
+	if (pdata && !pdata->master_mode) {
+		saif->master_id = pdata->master_id;
 		if (saif->master_id < 0 ||
-			saif->master_id >= ARRAY_SIZE(mxs_saif))
+			saif->master_id >= ARRAY_SIZE(mxs_saif) ||
+			saif->master_id == saif->id) {
+			dev_err(&pdev->dev, "get wrong master id\n");
 			return -EINVAL;
+		}
+	} else {
+		saif->master_id = saif->id;
 	}
 
 	saif->clk = clk_get(&pdev->dev, NULL);