Merge branch 'fix/misc' into topic/misc
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 1c8eb45..6de56d1 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1631,7 +1631,7 @@
Module snd-sscape
-----------------
- Module for ENSONIQ SoundScape PnP cards.
+ Module for ENSONIQ SoundScape cards.
port - Port # (PnP setup)
wss_port - WSS Port # (PnP setup)
@@ -1639,10 +1639,11 @@
mpu_irq - MPU-401 IRQ # (PnP setup)
dma - DMA # (PnP setup)
dma2 - 2nd DMA # (PnP setup, -1 to disable)
+ joystick - Enable gameport - 0 = disable (default), 1 = enable
- This module supports multiple cards. ISA PnP must be enabled.
- You need sscape_ctl tool in alsa-tools package for loading
- the microcode.
+ This module supports multiple cards.
+
+ The driver requires the firmware loader support on kernel.
Module snd-sun-amd7930 (on sparc only)
--------------------------------------
diff --git a/include/sound/Kbuild b/include/sound/Kbuild
index fd054a3..e9dd936 100644
--- a/include/sound/Kbuild
+++ b/include/sound/Kbuild
@@ -2,7 +2,6 @@
header-y += hdsp.h
header-y += hdspm.h
header-y += sfnt_info.h
-header-y += sscape_ioctl.h
unifdef-y += asequencer.h
unifdef-y += asound.h
diff --git a/include/sound/sscape_ioctl.h b/include/sound/sscape_ioctl.h
deleted file mode 100644
index 0d88859..0000000
--- a/include/sound/sscape_ioctl.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef SSCAPE_IOCTL_H
-#define SSCAPE_IOCTL_H
-
-
-struct sscape_bootblock
-{
- unsigned char code[256];
- unsigned version;
-};
-
-#define SSCAPE_MICROCODE_SIZE 65536
-
-struct sscape_microcode
-{
- unsigned char __user *code;
-};
-
-#define SND_SSCAPE_LOAD_BOOTB _IOWR('P', 100, struct sscape_bootblock)
-#define SND_SSCAPE_LOAD_MCODE _IOW ('P', 101, struct sscape_microcode)
-
-#endif
diff --git a/sound/core/isadma.c b/sound/core/isadma.c
index 79f0f16..950e19b 100644
--- a/sound/core/isadma.c
+++ b/sound/core/isadma.c
@@ -85,16 +85,24 @@
unsigned int snd_dma_pointer(unsigned long dma, unsigned int size)
{
unsigned long flags;
- unsigned int result;
+ unsigned int result, result1;
flags = claim_dma_lock();
clear_dma_ff(dma);
if (!isa_dma_bridge_buggy)
disable_dma(dma);
result = get_dma_residue(dma);
+ /*
+ * HACK - read the counter again and choose higher value in order to
+ * avoid reading during counter lower byte roll over if the
+ * isa_dma_bridge_buggy is set.
+ */
+ result1 = get_dma_residue(dma);
if (!isa_dma_bridge_buggy)
enable_dma(dma);
release_dma_lock(flags);
+ if (unlikely(result < result1))
+ result = result1;
#ifdef CONFIG_SND_DEBUG
if (result > size)
snd_printk(KERN_ERR "pointer (0x%x) for DMA #%ld is greater than transfer size (0x%x)\n", result, dma, size);
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 51a7e37..02fe81c 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -372,15 +372,21 @@
config SND_SSCAPE
tristate "Ensoniq SoundScape driver"
- select SND_HWDEP
select SND_MPU401_UART
select SND_WSS_LIB
+ select FW_LOADER
help
Say Y here to include support for Ensoniq SoundScape
- soundcards.
+ and Ensoniq OEM soundcards.
The PCM audio is supported on SoundScape Classic, Elite, PnP
- and VIVO cards. The MIDI support is very experimental.
+ and VIVO cards. The supported OEM cards are SPEA Media FX and
+ Reveal SC-600.
+ The MIDI support is very experimental and requires binary
+ firmware files called "scope.cod" and "sndscape.co?" where the
+ ? is digit 0, 1, 2, 3 or 4. The firmware files can be found
+ in DOS or Windows driver packages. One has to put the firmware
+ files into the /lib/firmware directory.
To compile this driver as a module, choose M here: the module
will be called snd-sscape.
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index 8cfbff7..5cf42b4 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -121,7 +121,6 @@
unsigned int dma1_shift;
unsigned int dma2_shift;
- struct snd_card *card;
struct snd_pcm *pcm;
struct snd_pcm_substream *playback_a_substream;
struct snd_pcm_substream *capture_a_substream;
@@ -140,10 +139,6 @@
#ifdef CONFIG_PM
unsigned char pm_reg;
#endif
-};
-
-struct snd_audiodrive {
- struct snd_es18xx *chip;
#ifdef CONFIG_PNP
struct pnp_dev *dev;
struct pnp_dev *devc;
@@ -755,7 +750,8 @@
static irqreturn_t snd_es18xx_interrupt(int irq, void *dev_id)
{
- struct snd_es18xx *chip = dev_id;
+ struct snd_card *card = dev_id;
+ struct snd_es18xx *chip = card->private_data;
unsigned char status;
if (chip->caps & ES18XX_CONTROL) {
@@ -805,12 +801,16 @@
int split = 0;
if (chip->caps & ES18XX_HWV) {
split = snd_es18xx_mixer_read(chip, 0x64) & 0x80;
- snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE, &chip->hw_switch->id);
- snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE, &chip->hw_volume->id);
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &chip->hw_switch->id);
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &chip->hw_volume->id);
}
if (!split) {
- snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE, &chip->master_switch->id);
- snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE, &chip->master_volume->id);
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &chip->master_switch->id);
+ snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &chip->master_volume->id);
}
/* ack interrupt */
snd_es18xx_mixer_write(chip, 0x66, 0x00);
@@ -1691,8 +1691,10 @@
.pointer = snd_es18xx_capture_pointer,
};
-static int __devinit snd_es18xx_pcm(struct snd_es18xx *chip, int device, struct snd_pcm ** rpcm)
+static int __devinit snd_es18xx_pcm(struct snd_card *card, int device,
+ struct snd_pcm **rpcm)
{
+ struct snd_es18xx *chip = card->private_data;
struct snd_pcm *pcm;
char str[16];
int err;
@@ -1701,9 +1703,9 @@
*rpcm = NULL;
sprintf(str, "ES%x", chip->version);
if (chip->caps & ES18XX_PCM2)
- err = snd_pcm_new(chip->card, str, device, 2, 1, &pcm);
+ err = snd_pcm_new(card, str, device, 2, 1, &pcm);
else
- err = snd_pcm_new(chip->card, str, device, 1, 1, &pcm);
+ err = snd_pcm_new(card, str, device, 1, 1, &pcm);
if (err < 0)
return err;
@@ -1734,10 +1736,9 @@
#ifdef CONFIG_PM
static int snd_es18xx_suspend(struct snd_card *card, pm_message_t state)
{
- struct snd_audiodrive *acard = card->private_data;
- struct snd_es18xx *chip = acard->chip;
+ struct snd_es18xx *chip = card->private_data;
- snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
+ snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
snd_pcm_suspend_all(chip->pcm);
@@ -1752,24 +1753,25 @@
static int snd_es18xx_resume(struct snd_card *card)
{
- struct snd_audiodrive *acard = card->private_data;
- struct snd_es18xx *chip = acard->chip;
+ struct snd_es18xx *chip = card->private_data;
/* restore PM register, we won't wake till (not 0x07) i/o activity though */
snd_es18xx_write(chip, ES18XX_PM, chip->pm_reg ^= ES18XX_PM_FM);
- snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
+ snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
}
#endif /* CONFIG_PM */
-static int snd_es18xx_free(struct snd_es18xx *chip)
+static int snd_es18xx_free(struct snd_card *card)
{
+ struct snd_es18xx *chip = card->private_data;
+
release_and_free_resource(chip->res_port);
release_and_free_resource(chip->res_ctrl_port);
release_and_free_resource(chip->res_mpu_port);
if (chip->irq >= 0)
- free_irq(chip->irq, (void *) chip);
+ free_irq(chip->irq, (void *) card);
if (chip->dma1 >= 0) {
disable_dma(chip->dma1);
free_dma(chip->dma1);
@@ -1778,37 +1780,29 @@
disable_dma(chip->dma2);
free_dma(chip->dma2);
}
- kfree(chip);
return 0;
}
static int snd_es18xx_dev_free(struct snd_device *device)
{
- struct snd_es18xx *chip = device->device_data;
- return snd_es18xx_free(chip);
+ return snd_es18xx_free(device->card);
}
static int __devinit snd_es18xx_new_device(struct snd_card *card,
unsigned long port,
unsigned long mpu_port,
unsigned long fm_port,
- int irq, int dma1, int dma2,
- struct snd_es18xx ** rchip)
+ int irq, int dma1, int dma2)
{
- struct snd_es18xx *chip;
+ struct snd_es18xx *chip = card->private_data;
static struct snd_device_ops ops = {
.dev_free = snd_es18xx_dev_free,
};
int err;
- *rchip = NULL;
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (chip == NULL)
- return -ENOMEM;
spin_lock_init(&chip->reg_lock);
spin_lock_init(&chip->mixer_lock);
spin_lock_init(&chip->ctrl_lock);
- chip->card = card;
chip->port = port;
chip->mpu_port = mpu_port;
chip->fm_port = fm_port;
@@ -1818,53 +1812,53 @@
chip->audio2_vol = 0x00;
chip->active = 0;
- if ((chip->res_port = request_region(port, 16, "ES18xx")) == NULL) {
- snd_es18xx_free(chip);
+ chip->res_port = request_region(port, 16, "ES18xx");
+ if (chip->res_port == NULL) {
+ snd_es18xx_free(card);
snd_printk(KERN_ERR PFX "unable to grap ports 0x%lx-0x%lx\n", port, port + 16 - 1);
return -EBUSY;
}
- if (request_irq(irq, snd_es18xx_interrupt, IRQF_DISABLED, "ES18xx", (void *) chip)) {
- snd_es18xx_free(chip);
+ if (request_irq(irq, snd_es18xx_interrupt, IRQF_DISABLED, "ES18xx",
+ (void *) card)) {
+ snd_es18xx_free(card);
snd_printk(KERN_ERR PFX "unable to grap IRQ %d\n", irq);
return -EBUSY;
}
chip->irq = irq;
if (request_dma(dma1, "ES18xx DMA 1")) {
- snd_es18xx_free(chip);
+ snd_es18xx_free(card);
snd_printk(KERN_ERR PFX "unable to grap DMA1 %d\n", dma1);
return -EBUSY;
}
chip->dma1 = dma1;
if (dma2 != dma1 && request_dma(dma2, "ES18xx DMA 2")) {
- snd_es18xx_free(chip);
+ snd_es18xx_free(card);
snd_printk(KERN_ERR PFX "unable to grap DMA2 %d\n", dma2);
return -EBUSY;
}
chip->dma2 = dma2;
if (snd_es18xx_probe(chip) < 0) {
- snd_es18xx_free(chip);
+ snd_es18xx_free(card);
return -ENODEV;
}
- if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
- snd_es18xx_free(chip);
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, NULL, &ops);
+ if (err < 0) {
+ snd_es18xx_free(card);
return err;
}
- *rchip = chip;
return 0;
}
-static int __devinit snd_es18xx_mixer(struct snd_es18xx *chip)
+static int __devinit snd_es18xx_mixer(struct snd_card *card)
{
- struct snd_card *card;
+ struct snd_es18xx *chip = card->private_data;
int err;
unsigned int idx;
- card = chip->card;
-
strcpy(card->mixername, chip->pcm->name);
for (idx = 0; idx < ARRAY_SIZE(snd_es18xx_base_controls); idx++) {
@@ -2063,11 +2057,11 @@
return 0;
}
-static int __devinit snd_audiodrive_pnp(int dev, struct snd_audiodrive *acard,
+static int __devinit snd_audiodrive_pnp(int dev, struct snd_es18xx *chip,
struct pnp_dev *pdev)
{
- acard->dev = pdev;
- if (snd_audiodrive_pnp_init_main(dev, acard->dev) < 0)
+ chip->dev = pdev;
+ if (snd_audiodrive_pnp_init_main(dev, chip->dev) < 0)
return -EBUSY;
return 0;
}
@@ -2093,26 +2087,26 @@
MODULE_DEVICE_TABLE(pnp_card, snd_audiodrive_pnpids);
-static int __devinit snd_audiodrive_pnpc(int dev, struct snd_audiodrive *acard,
+static int __devinit snd_audiodrive_pnpc(int dev, struct snd_es18xx *chip,
struct pnp_card_link *card,
const struct pnp_card_device_id *id)
{
- acard->dev = pnp_request_card_device(card, id->devs[0].id, NULL);
- if (acard->dev == NULL)
+ chip->dev = pnp_request_card_device(card, id->devs[0].id, NULL);
+ if (chip->dev == NULL)
return -EBUSY;
- acard->devc = pnp_request_card_device(card, id->devs[1].id, NULL);
- if (acard->devc == NULL)
+ chip->devc = pnp_request_card_device(card, id->devs[1].id, NULL);
+ if (chip->devc == NULL)
return -EBUSY;
/* Control port initialization */
- if (pnp_activate_dev(acard->devc) < 0) {
+ if (pnp_activate_dev(chip->devc) < 0) {
snd_printk(KERN_ERR PFX "PnP control configure failure (out of resources?)\n");
return -EAGAIN;
}
snd_printdd("pnp: port=0x%llx\n",
- (unsigned long long)pnp_port_start(acard->devc, 0));
- if (snd_audiodrive_pnp_init_main(dev, acard->dev) < 0)
+ (unsigned long long)pnp_port_start(chip->devc, 0));
+ if (snd_audiodrive_pnp_init_main(dev, chip->dev) < 0)
return -EBUSY;
return 0;
@@ -2128,24 +2122,20 @@
static int snd_es18xx_card_new(int dev, struct snd_card **cardp)
{
return snd_card_create(index[dev], id[dev], THIS_MODULE,
- sizeof(struct snd_audiodrive), cardp);
+ sizeof(struct snd_es18xx), cardp);
}
static int __devinit snd_audiodrive_probe(struct snd_card *card, int dev)
{
- struct snd_audiodrive *acard = card->private_data;
- struct snd_es18xx *chip;
+ struct snd_es18xx *chip = card->private_data;
struct snd_opl3 *opl3;
int err;
- if ((err = snd_es18xx_new_device(card,
- port[dev],
- mpu_port[dev],
- fm_port[dev],
- irq[dev], dma1[dev], dma2[dev],
- &chip)) < 0)
+ err = snd_es18xx_new_device(card,
+ port[dev], mpu_port[dev], fm_port[dev],
+ irq[dev], dma1[dev], dma2[dev]);
+ if (err < 0)
return err;
- acard->chip = chip;
sprintf(card->driver, "ES%x", chip->version);
@@ -2161,10 +2151,12 @@
chip->port,
irq[dev], dma1[dev]);
- if ((err = snd_es18xx_pcm(chip, 0, NULL)) < 0)
+ err = snd_es18xx_pcm(card, 0, NULL);
+ if (err < 0)
return err;
- if ((err = snd_es18xx_mixer(chip)) < 0)
+ err = snd_es18xx_mixer(card);
+ if (err < 0)
return err;
if (fm_port[dev] > 0 && fm_port[dev] != SNDRV_AUTO_PORT) {
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c
index 6618712..e2d5d2d 100644
--- a/sound/isa/sscape.c
+++ b/sound/isa/sscape.c
@@ -1,5 +1,5 @@
/*
- * Low-level ALSA driver for the ENSONIQ SoundScape PnP
+ * Low-level ALSA driver for the ENSONIQ SoundScape
* Copyright (c) by Chris Rankin
*
* This driver was written in part using information obtained from
@@ -25,31 +25,36 @@
#include <linux/err.h>
#include <linux/isa.h>
#include <linux/delay.h>
+#include <linux/firmware.h>
#include <linux/pnp.h>
#include <linux/spinlock.h>
#include <linux/moduleparam.h>
#include <asm/dma.h>
#include <sound/core.h>
-#include <sound/hwdep.h>
#include <sound/wss.h>
#include <sound/mpu401.h>
#include <sound/initval.h>
-#include <sound/sscape_ioctl.h>
-
MODULE_AUTHOR("Chris Rankin");
-MODULE_DESCRIPTION("ENSONIQ SoundScape PnP driver");
+MODULE_DESCRIPTION("ENSONIQ SoundScape driver");
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("sndscape.co0");
+MODULE_FIRMWARE("sndscape.co1");
+MODULE_FIRMWARE("sndscape.co2");
+MODULE_FIRMWARE("sndscape.co3");
+MODULE_FIRMWARE("sndscape.co4");
+MODULE_FIRMWARE("scope.cod");
-static int index[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IDX;
-static char* id[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_STR;
-static long port[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PORT;
-static long wss_port[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_PORT;
-static int irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ;
-static int mpu_irq[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_IRQ;
-static int dma[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_DMA;
-static int dma2[SNDRV_CARDS] __devinitdata = SNDRV_DEFAULT_DMA;
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
+static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
+static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
+static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
+static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
+static bool joystick[SNDRV_CARDS];
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index number for SoundScape soundcard");
@@ -75,6 +80,9 @@
module_param_array(dma2, int, NULL, 0444);
MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver.");
+module_param_array(joystick, bool, NULL, 0444);
+MODULE_PARM_DESC(joystick, "Enable gameport.");
+
#ifdef CONFIG_PNP
static int isa_registered;
static int pnp_registered;
@@ -101,14 +109,14 @@
#define RX_READY 0x01
#define TX_READY 0x02
-#define CMD_ACK 0x80
-#define CMD_SET_MIDI_VOL 0x84
-#define CMD_GET_MIDI_VOL 0x85
-#define CMD_XXX_MIDI_VOL 0x86
-#define CMD_SET_EXTMIDI 0x8a
-#define CMD_GET_EXTMIDI 0x8b
-#define CMD_SET_MT32 0x8c
-#define CMD_GET_MT32 0x8d
+#define CMD_ACK 0x80
+#define CMD_SET_MIDI_VOL 0x84
+#define CMD_GET_MIDI_VOL 0x85
+#define CMD_XXX_MIDI_VOL 0x86
+#define CMD_SET_EXTMIDI 0x8a
+#define CMD_GET_EXTMIDI 0x8b
+#define CMD_SET_MT32 0x8c
+#define CMD_GET_MT32 0x8d
enum GA_REG {
GA_INTSTAT_REG = 0,
@@ -127,7 +135,8 @@
enum card_type {
- SSCAPE,
+ MEDIA_FX, /* Sequoia S-1000 */
+ SSCAPE, /* Sequoia S-2000 */
SSCAPE_PNP,
SSCAPE_VIVO,
};
@@ -140,16 +149,7 @@
struct resource *io_res;
struct resource *wss_res;
struct snd_wss *chip;
- struct snd_mpu401 *mpu;
- struct snd_hwdep *hw;
- /*
- * The MIDI device won't work until we've loaded
- * its firmware via a hardware-dependent device IOCTL
- */
- spinlock_t fwlock;
- int hw_in_use;
- unsigned long midi_usage;
unsigned char midi_vol;
};
@@ -161,28 +161,21 @@
return (struct soundscape *) (c->private_data);
}
-static inline struct soundscape *get_mpu401_soundscape(struct snd_mpu401 * mpu)
-{
- return (struct soundscape *) (mpu->private_data);
-}
-
-static inline struct soundscape *get_hwdep_soundscape(struct snd_hwdep * hw)
-{
- return (struct soundscape *) (hw->private_data);
-}
-
-
/*
* Allocates some kernel memory that we can use for DMA.
* I think this means that the memory has to map to
* contiguous pages of physical memory.
*/
-static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf, unsigned long size)
+static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf,
+ unsigned long size)
{
if (buf) {
- if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV, snd_dma_isa_data(),
+ if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
+ snd_dma_isa_data(),
size, buf) < 0) {
- snd_printk(KERN_ERR "sscape: Failed to allocate %lu bytes for DMA\n", size);
+ snd_printk(KERN_ERR "sscape: Failed to allocate "
+ "%lu bytes for DMA\n",
+ size);
return NULL;
}
}
@@ -199,13 +192,13 @@
snd_dma_free_pages(buf);
}
-
/*
* This function writes to the SoundScape's control registers,
* but doesn't do any locking. It's up to the caller to do that.
* This is why this function is "unsafe" ...
*/
-static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg, unsigned char val)
+static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg,
+ unsigned char val)
{
outb(reg, ODIE_ADDR_IO(io_base));
outb(val, ODIE_DATA_IO(io_base));
@@ -215,7 +208,8 @@
* Write to the SoundScape's control registers, and do the
* necessary locking ...
*/
-static void sscape_write(struct soundscape *s, enum GA_REG reg, unsigned char val)
+static void sscape_write(struct soundscape *s, enum GA_REG reg,
+ unsigned char val)
{
unsigned long flags;
@@ -228,7 +222,8 @@
* Read from the SoundScape's control registers, but leave any
* locking to the caller. This is why the function is "unsafe" ...
*/
-static inline unsigned char sscape_read_unsafe(unsigned io_base, enum GA_REG reg)
+static inline unsigned char sscape_read_unsafe(unsigned io_base,
+ enum GA_REG reg)
{
outb(reg, ODIE_ADDR_IO(io_base));
return inb(ODIE_DATA_IO(io_base));
@@ -257,9 +252,8 @@
static inline int host_read_unsafe(unsigned io_base)
{
int data = -1;
- if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0) {
+ if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0)
data = inb(HOST_DATA_IO(io_base));
- }
return data;
}
@@ -301,7 +295,7 @@
* Also leaves all locking-issues to the caller ...
*/
static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
- unsigned timeout)
+ unsigned timeout)
{
int err;
@@ -320,7 +314,7 @@
*
* NOTE: This check is based upon observation, not documentation.
*/
-static inline int verify_mpu401(const struct snd_mpu401 * mpu)
+static inline int verify_mpu401(const struct snd_mpu401 *mpu)
{
return ((inb(MPU401C(mpu)) & 0xc0) == 0x80);
}
@@ -328,7 +322,7 @@
/*
* This is apparently the standard way to initailise an MPU-401
*/
-static inline void initialise_mpu401(const struct snd_mpu401 * mpu)
+static inline void initialise_mpu401(const struct snd_mpu401 *mpu)
{
outb(0, MPU401D(mpu));
}
@@ -338,9 +332,10 @@
* The AD1845 detection fails if we *don't* do this, so I
* think that this is a good idea ...
*/
-static inline void activate_ad1845_unsafe(unsigned io_base)
+static void activate_ad1845_unsafe(unsigned io_base)
{
- sscape_write_unsafe(io_base, GA_HMCTL_REG, (sscape_read_unsafe(io_base, GA_HMCTL_REG) & 0xcf) | 0x10);
+ unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG);
+ sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10);
sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80);
}
@@ -359,24 +354,27 @@
* Tell the SoundScape to begin a DMA tranfer using the given channel.
* All locking issues are left to the caller.
*/
-static inline void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
+static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
{
- sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) | 0x01);
- sscape_write_unsafe(io_base, reg, sscape_read_unsafe(io_base, reg) & 0xfe);
+ sscape_write_unsafe(io_base, reg,
+ sscape_read_unsafe(io_base, reg) | 0x01);
+ sscape_write_unsafe(io_base, reg,
+ sscape_read_unsafe(io_base, reg) & 0xfe);
}
/*
* Wait for a DMA transfer to complete. This is a "limited busy-wait",
* and all locking issues are left to the caller.
*/
-static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned timeout)
+static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg,
+ unsigned timeout)
{
while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) {
udelay(100);
--timeout;
} /* while */
- return (sscape_read_unsafe(io_base, reg) & 0x01);
+ return sscape_read_unsafe(io_base, reg) & 0x01;
}
/*
@@ -392,12 +390,12 @@
do {
unsigned long flags;
- unsigned char x;
+ int x;
spin_lock_irqsave(&s->lock, flags);
- x = inb(HOST_DATA_IO(s->io_base));
+ x = host_read_unsafe(s->io_base);
spin_unlock_irqrestore(&s->lock, flags);
- if ((x & 0xfe) == 0xfe)
+ if (x == 0xfe || x == 0xff)
return 1;
msleep(10);
@@ -419,10 +417,10 @@
do {
unsigned long flags;
- unsigned char x;
+ int x;
spin_lock_irqsave(&s->lock, flags);
- x = inb(HOST_DATA_IO(s->io_base));
+ x = host_read_unsafe(s->io_base);
spin_unlock_irqrestore(&s->lock, flags);
if (x == 0xfe)
return 1;
@@ -436,15 +434,15 @@
/*
* Upload a byte-stream into the SoundScape using DMA channel A.
*/
-static int upload_dma_data(struct soundscape *s,
- const unsigned char __user *data,
- size_t size)
+static int upload_dma_data(struct soundscape *s, const unsigned char *data,
+ size_t size)
{
unsigned long flags;
struct snd_dma_buffer dma;
int ret;
+ unsigned char val;
- if (!get_dmabuf(&dma, PAGE_ALIGN(size)))
+ if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024)))
return -ENOMEM;
spin_lock_irqsave(&s->lock, flags);
@@ -452,70 +450,57 @@
/*
* Reset the board ...
*/
- sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f);
+ val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f);
/*
* Enable the DMA channels and configure them ...
*/
- sscape_write_unsafe(s->io_base, GA_DMACFG_REG, 0x50);
- sscape_write_unsafe(s->io_base, GA_DMAA_REG, (s->chip->dma1 << 4) | DMA_8BIT);
+ val = (s->chip->dma1 << 4) | DMA_8BIT;
+ sscape_write_unsafe(s->io_base, GA_DMAA_REG, val);
sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);
/*
* Take the board out of reset ...
*/
- sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x80);
+ val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80);
/*
- * Upload the user's data (firmware?) to the SoundScape
+ * Upload the firmware to the SoundScape
* board through the DMA channel ...
*/
while (size != 0) {
unsigned long len;
- /*
- * Apparently, copying to/from userspace can sleep.
- * We are therefore forbidden from holding any
- * spinlocks while we copy ...
- */
- spin_unlock_irqrestore(&s->lock, flags);
-
- /*
- * Remember that the data that we want to DMA
- * comes from USERSPACE. We have already verified
- * the userspace pointer ...
- */
len = min(size, dma.bytes);
- len -= __copy_from_user(dma.area, data, len);
+ memcpy(dma.area, data, len);
data += len;
size -= len;
- /*
- * Grab that spinlock again, now that we've
- * finished copying!
- */
- spin_lock_irqsave(&s->lock, flags);
-
snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE);
sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG);
if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) {
/*
- * Don't forget to release this spinlock we're holding ...
+ * Don't forget to release this spinlock we're holding
*/
spin_unlock_irqrestore(&s->lock, flags);
- snd_printk(KERN_ERR "sscape: DMA upload has timed out\n");
+ snd_printk(KERN_ERR
+ "sscape: DMA upload has timed out\n");
ret = -EAGAIN;
goto _release_dma;
}
} /* while */
set_host_mode_unsafe(s->io_base);
+ outb(0x0, s->io_base);
/*
* Boot the board ... (I think)
*/
- sscape_write_unsafe(s->io_base, GA_HMCTL_REG, sscape_read_unsafe(s->io_base, GA_HMCTL_REG) | 0x40);
+ val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40);
spin_unlock_irqrestore(&s->lock, flags);
/*
@@ -525,10 +510,12 @@
*/
ret = 0;
if (!obp_startup_ack(s, 5000)) {
- snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n");
+ snd_printk(KERN_ERR "sscape: No response "
+ "from on-board processor after upload\n");
ret = -EAGAIN;
} else if (!host_startup_ack(s, 5000)) {
- snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n");
+ snd_printk(KERN_ERR
+ "sscape: SoundScape failed to initialise\n");
ret = -EAGAIN;
}
@@ -536,7 +523,7 @@
/*
* NOTE!!! We are NOT holding any spinlocks at this point !!!
*/
- sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_ODIE ? 0x70 : 0x40));
+ sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70));
free_dmabuf(&dma);
return ret;
@@ -546,167 +533,76 @@
* Upload the bootblock(?) into the SoundScape. The only
* purpose of this block of code seems to be to tell
* us which version of the microcode we should be using.
- *
- * NOTE: The boot-block data resides in USER-SPACE!!!
- * However, we have already verified its memory
- * addresses by the time we get here.
*/
-static int sscape_upload_bootblock(struct soundscape *sscape, struct sscape_bootblock __user *bb)
+static int sscape_upload_bootblock(struct snd_card *card)
{
+ struct soundscape *sscape = get_card_soundscape(card);
unsigned long flags;
+ const struct firmware *init_fw = NULL;
int data = 0;
int ret;
- ret = upload_dma_data(sscape, bb->code, sizeof(bb->code));
+ ret = request_firmware(&init_fw, "scope.cod", card->dev);
+ if (ret < 0) {
+ snd_printk(KERN_ERR "sscape: Error loading scope.cod");
+ return ret;
+ }
+ ret = upload_dma_data(sscape, init_fw->data, init_fw->size);
+
+ release_firmware(init_fw);
spin_lock_irqsave(&sscape->lock, flags);
- if (ret == 0) {
+ if (ret == 0)
data = host_read_ctrl_unsafe(sscape->io_base, 100);
- }
- set_midi_mode_unsafe(sscape->io_base);
+
+ if (data & 0x10)
+ sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f);
+
spin_unlock_irqrestore(&sscape->lock, flags);
- if (ret == 0) {
- if (data < 0) {
- snd_printk(KERN_ERR "sscape: timeout reading firmware version\n");
- ret = -EAGAIN;
- }
- else if (__copy_to_user(&bb->version, &data, sizeof(bb->version))) {
- ret = -EFAULT;
- }
+ data &= 0xf;
+ if (ret == 0 && data > 7) {
+ snd_printk(KERN_ERR
+ "sscape: timeout reading firmware version\n");
+ ret = -EAGAIN;
}
- return ret;
+ return (ret == 0) ? data : ret;
}
/*
- * Upload the microcode into the SoundScape. The
- * microcode is 64K of data, and if we try to copy
- * it into a local variable then we will SMASH THE
- * KERNEL'S STACK! We therefore leave it in USER
- * SPACE, and save ourselves from copying it at all.
+ * Upload the microcode into the SoundScape.
*/
-static int sscape_upload_microcode(struct soundscape *sscape,
- const struct sscape_microcode __user *mc)
+static int sscape_upload_microcode(struct snd_card *card, int version)
{
- unsigned long flags;
- char __user *code;
+ struct soundscape *sscape = get_card_soundscape(card);
+ const struct firmware *init_fw = NULL;
+ char name[14];
int err;
- /*
- * We are going to have to copy this data into a special
- * DMA-able buffer before we can upload it. We shall therefore
- * just check that the data pointer is valid for now.
- *
- * NOTE: This buffer is 64K long! That's WAY too big to
- * copy into a stack-temporary anyway.
- */
- if ( get_user(code, &mc->code) ||
- !access_ok(VERIFY_READ, code, SSCAPE_MICROCODE_SIZE) )
- return -EFAULT;
+ snprintf(name, sizeof(name), "sndscape.co%d", version);
- if ((err = upload_dma_data(sscape, code, SSCAPE_MICROCODE_SIZE)) == 0) {
- snd_printk(KERN_INFO "sscape: MIDI firmware loaded\n");
+ err = request_firmware(&init_fw, name, card->dev);
+ if (err < 0) {
+ snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d",
+ version);
+ return err;
}
+ err = upload_dma_data(sscape, init_fw->data, init_fw->size);
+ if (err == 0)
+ snd_printk(KERN_INFO "sscape: MIDI firmware loaded %d KBs\n",
+ init_fw->size >> 10);
- spin_lock_irqsave(&sscape->lock, flags);
- set_midi_mode_unsafe(sscape->io_base);
- spin_unlock_irqrestore(&sscape->lock, flags);
-
- initialise_mpu401(sscape->mpu);
+ release_firmware(init_fw);
return err;
}
/*
- * Hardware-specific device functions, to implement special
- * IOCTLs for the SoundScape card. This is how we upload
- * the microcode into the card, for example, and so we
- * must ensure that no two processes can open this device
- * simultaneously, and that we can't open it at all if
- * someone is using the MIDI device.
- */
-static int sscape_hw_open(struct snd_hwdep * hw, struct file *file)
-{
- register struct soundscape *sscape = get_hwdep_soundscape(hw);
- unsigned long flags;
- int err;
-
- spin_lock_irqsave(&sscape->fwlock, flags);
-
- if ((sscape->midi_usage != 0) || sscape->hw_in_use) {
- err = -EBUSY;
- } else {
- sscape->hw_in_use = 1;
- err = 0;
- }
-
- spin_unlock_irqrestore(&sscape->fwlock, flags);
- return err;
-}
-
-static int sscape_hw_release(struct snd_hwdep * hw, struct file *file)
-{
- register struct soundscape *sscape = get_hwdep_soundscape(hw);
- unsigned long flags;
-
- spin_lock_irqsave(&sscape->fwlock, flags);
- sscape->hw_in_use = 0;
- spin_unlock_irqrestore(&sscape->fwlock, flags);
- return 0;
-}
-
-static int sscape_hw_ioctl(struct snd_hwdep * hw, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct soundscape *sscape = get_hwdep_soundscape(hw);
- int err = -EBUSY;
-
- switch (cmd) {
- case SND_SSCAPE_LOAD_BOOTB:
- {
- register struct sscape_bootblock __user *bb = (struct sscape_bootblock __user *) arg;
-
- /*
- * We are going to have to copy this data into a special
- * DMA-able buffer before we can upload it. We shall therefore
- * just check that the data pointer is valid for now ...
- */
- if ( !access_ok(VERIFY_READ, bb->code, sizeof(bb->code)) )
- return -EFAULT;
-
- /*
- * Now check that we can write the firmware version number too...
- */
- if ( !access_ok(VERIFY_WRITE, &bb->version, sizeof(bb->version)) )
- return -EFAULT;
-
- err = sscape_upload_bootblock(sscape, bb);
- }
- break;
-
- case SND_SSCAPE_LOAD_MCODE:
- {
- register const struct sscape_microcode __user *mc = (const struct sscape_microcode __user *) arg;
-
- err = sscape_upload_microcode(sscape, mc);
- }
- break;
-
- default:
- err = -EINVAL;
- break;
- } /* switch */
-
- return err;
-}
-
-
-/*
* Mixer control for the SoundScape's MIDI device.
*/
static int sscape_midi_info(struct snd_kcontrol *ctl,
- struct snd_ctl_elem_info *uinfo)
+ struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 1;
@@ -716,7 +612,7 @@
}
static int sscape_midi_get(struct snd_kcontrol *kctl,
- struct snd_ctl_elem_value *uctl)
+ struct snd_ctl_elem_value *uctl)
{
struct snd_wss *chip = snd_kcontrol_chip(kctl);
struct snd_card *card = chip->card;
@@ -730,16 +626,18 @@
}
static int sscape_midi_put(struct snd_kcontrol *kctl,
- struct snd_ctl_elem_value *uctl)
+ struct snd_ctl_elem_value *uctl)
{
struct snd_wss *chip = snd_kcontrol_chip(kctl);
struct snd_card *card = chip->card;
- register struct soundscape *s = get_card_soundscape(card);
+ struct soundscape *s = get_card_soundscape(card);
unsigned long flags;
int change;
+ unsigned char new_val;
spin_lock_irqsave(&s->lock, flags);
+ new_val = uctl->value.integer.value[0] & 127;
/*
* We need to put the board into HOST mode before we
* can send any volume-changing HOST commands ...
@@ -752,15 +650,16 @@
* and then perform another volume-related command. Perhaps the
* first command is an "open" and the second command is a "close"?
*/
- if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) {
+ if (s->midi_vol == new_val) {
change = 0;
goto __skip_change;
}
- change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
- && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100)
- && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100));
- s->midi_vol = (unsigned char) uctl->value.integer.value[0] & 127;
- __skip_change:
+ change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
+ && host_write_ctrl_unsafe(s->io_base, new_val, 100)
+ && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)
+ && host_write_ctrl_unsafe(s->io_base, new_val, 100);
+ s->midi_vol = new_val;
+__skip_change:
/*
* Take the board out of HOST mode and back into MIDI mode ...
@@ -784,20 +683,25 @@
* These IRQs are encoded as bit patterns so that they can be
* written to the control registers.
*/
-static unsigned __devinit get_irq_config(int irq)
+static unsigned __devinit get_irq_config(int sscape_type, int irq)
{
static const int valid_irq[] = { 9, 5, 7, 10 };
+ static const int old_irq[] = { 9, 7, 5, 15 };
unsigned cfg;
- for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg) {
- if (irq == valid_irq[cfg])
- return cfg;
- } /* for */
+ if (sscape_type == MEDIA_FX) {
+ for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg)
+ if (irq == old_irq[cfg])
+ return cfg;
+ } else {
+ for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg)
+ if (irq == valid_irq[cfg])
+ return cfg;
+ }
return INVALID_IRQ;
}
-
/*
* Perform certain arcane port-checks to see whether there
* is a SoundScape board lurking behind the given ports.
@@ -842,11 +746,15 @@
if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e)
goto _done;
- d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
- sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
+ if (s->ic_type == IC_OPUS)
+ activate_ad1845_unsafe(s->io_base);
if (s->type == SSCAPE_VIVO)
wss_io += 4;
+
+ d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
+
/* wait for WSS codec */
for (d = 0; d < 500; d++) {
if ((inb(wss_io) & 0x80) == 0)
@@ -855,14 +763,36 @@
msleep(1);
spin_lock_irqsave(&s->lock, flags);
}
- snd_printd(KERN_INFO "init delay = %d ms\n", d);
+
+ if ((inb(wss_io) & 0x80) != 0)
+ goto _done;
+
+ if (inb(wss_io + 2) == 0xff)
+ goto _done;
+
+ d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
+ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d);
+
+ if ((inb(wss_io) & 0x80) != 0)
+ s->type = MEDIA_FX;
+
+ d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
+ sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
+ /* wait for WSS codec */
+ for (d = 0; d < 500; d++) {
+ if ((inb(wss_io) & 0x80) == 0)
+ break;
+ spin_unlock_irqrestore(&s->lock, flags);
+ msleep(1);
+ spin_lock_irqsave(&s->lock, flags);
+ }
/*
* SoundScape successfully detected!
*/
retval = 1;
- _done:
+_done:
spin_unlock_irqrestore(&s->lock, flags);
return retval;
}
@@ -873,63 +803,35 @@
* to crash the machine. Also check that someone isn't using the hardware
* IOCTL device.
*/
-static int mpu401_open(struct snd_mpu401 * mpu)
+static int mpu401_open(struct snd_mpu401 *mpu)
{
- int err;
-
if (!verify_mpu401(mpu)) {
- snd_printk(KERN_ERR "sscape: MIDI disabled, please load firmware\n");
- err = -ENODEV;
- } else {
- register struct soundscape *sscape = get_mpu401_soundscape(mpu);
- unsigned long flags;
-
- spin_lock_irqsave(&sscape->fwlock, flags);
-
- if (sscape->hw_in_use || (sscape->midi_usage == ULONG_MAX)) {
- err = -EBUSY;
- } else {
- ++(sscape->midi_usage);
- err = 0;
- }
-
- spin_unlock_irqrestore(&sscape->fwlock, flags);
+ snd_printk(KERN_ERR "sscape: MIDI disabled, "
+ "please load firmware\n");
+ return -ENODEV;
}
- return err;
-}
-
-static void mpu401_close(struct snd_mpu401 * mpu)
-{
- register struct soundscape *sscape = get_mpu401_soundscape(mpu);
- unsigned long flags;
-
- spin_lock_irqsave(&sscape->fwlock, flags);
- --(sscape->midi_usage);
- spin_unlock_irqrestore(&sscape->fwlock, flags);
+ return 0;
}
/*
* Initialse an MPU-401 subdevice for MIDI support on the SoundScape.
*/
-static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned long port, int irq)
+static int __devinit create_mpu401(struct snd_card *card, int devnum,
+ unsigned long port, int irq)
{
struct soundscape *sscape = get_card_soundscape(card);
struct snd_rawmidi *rawmidi;
int err;
- if ((err = snd_mpu401_uart_new(card, devnum,
- MPU401_HW_MPU401,
- port, MPU401_INFO_INTEGRATED,
- irq, IRQF_DISABLED,
- &rawmidi)) == 0) {
- struct snd_mpu401 *mpu = (struct snd_mpu401 *) rawmidi->private_data;
+ err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
+ MPU401_INFO_INTEGRATED, irq, IRQF_DISABLED,
+ &rawmidi);
+ if (err == 0) {
+ struct snd_mpu401 *mpu = rawmidi->private_data;
mpu->open_input = mpu401_open;
mpu->open_output = mpu401_open;
- mpu->close_input = mpu401_close;
- mpu->close_output = mpu401_close;
mpu->private_data = sscape;
- sscape->mpu = mpu;
initialise_mpu401(mpu);
}
@@ -950,32 +852,34 @@
register struct soundscape *sscape = get_card_soundscape(card);
struct snd_wss *chip;
int err;
+ int codec_type = WSS_HW_DETECT;
- if (sscape->type == SSCAPE_VIVO)
+ switch (sscape->type) {
+ case MEDIA_FX:
+ case SSCAPE:
+ /*
+ * There are some freak examples of early Soundscape cards
+ * with CS4231 instead of AD1848/CS4248. Unfortunately, the
+ * CS4231 works only in CS4248 compatibility mode on
+ * these cards so force it.
+ */
+ if (sscape->ic_type != IC_OPUS)
+ codec_type = WSS_HW_AD1848;
+ break;
+
+ case SSCAPE_VIVO:
port += 4;
-
- if (dma1 == dma2)
- dma2 = -1;
+ break;
+ default:
+ break;
+ }
err = snd_wss_create(card, port, -1, irq, dma1, dma2,
- WSS_HW_DETECT, WSS_HWSHARE_DMA1, &chip);
+ codec_type, WSS_HWSHARE_DMA1, &chip);
if (!err) {
unsigned long flags;
struct snd_pcm *pcm;
-/*
- * It turns out that the PLAYBACK_ENABLE bit is set
- * by the lowlevel driver ...
- *
-#define AD1845_IFACE_CONFIG \
- (CS4231_AUTOCALIB | CS4231_RECORD_ENABLE | CS4231_PLAYBACK_ENABLE)
- snd_wss_mce_up(chip);
- spin_lock_irqsave(&chip->reg_lock, flags);
- snd_wss_out(chip, CS4231_IFACE_CTRL, AD1845_IFACE_CONFIG);
- spin_unlock_irqrestore(&chip->reg_lock, flags);
- snd_wss_mce_down(chip);
- */
-
if (sscape->type != SSCAPE_VIVO) {
/*
* The input clock frequency on the SoundScape must
@@ -1022,17 +926,10 @@
}
}
- strcpy(card->driver, "SoundScape");
- strcpy(card->shortname, pcm->name);
- snprintf(card->longname, sizeof(card->longname),
- "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
- pcm->name, chip->port, chip->irq,
- chip->dma1, chip->dma2);
-
sscape->chip = chip;
}
- _error:
+_error:
return err;
}
@@ -1051,21 +948,8 @@
struct resource *wss_res;
unsigned long flags;
int err;
-
- /*
- * Check that the user didn't pass us garbage data ...
- */
- irq_cfg = get_irq_config(irq[dev]);
- if (irq_cfg == INVALID_IRQ) {
- snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
- return -ENXIO;
- }
-
- mpu_irq_cfg = get_irq_config(mpu_irq[dev]);
- if (mpu_irq_cfg == INVALID_IRQ) {
- printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
- return -ENXIO;
- }
+ int val;
+ const char *name;
/*
* Grab IO ports that we will need to probe so that we
@@ -1098,41 +982,51 @@
}
spin_lock_init(&sscape->lock);
- spin_lock_init(&sscape->fwlock);
sscape->io_res = io_res;
sscape->wss_res = wss_res;
sscape->io_base = port[dev];
if (!detect_sscape(sscape, wss_port[dev])) {
- printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base);
+ printk(KERN_ERR "sscape: hardware not detected at 0x%x\n",
+ sscape->io_base);
err = -ENODEV;
goto _release_dma;
}
- printk(KERN_INFO "sscape: hardware detected at 0x%x, using IRQ %d, DMA %d\n",
- sscape->io_base, irq[dev], dma[dev]);
+ switch (sscape->type) {
+ case MEDIA_FX:
+ name = "MediaFX/SoundFX";
+ break;
+ case SSCAPE:
+ name = "Soundscape";
+ break;
+ case SSCAPE_PNP:
+ name = "Soundscape PnP";
+ break;
+ case SSCAPE_VIVO:
+ name = "Soundscape VIVO";
+ break;
+ default:
+ name = "unknown Soundscape";
+ break;
+ }
- if (sscape->type != SSCAPE_VIVO) {
- /*
- * Now create the hardware-specific device so that we can
- * load the microcode into the on-board processor.
- * We cannot use the MPU-401 MIDI system until this firmware
- * has been loaded into the card.
- */
- err = snd_hwdep_new(card, "MC68EC000", 0, &(sscape->hw));
- if (err < 0) {
- printk(KERN_ERR "sscape: Failed to create "
- "firmware device\n");
- goto _release_dma;
- }
- strlcpy(sscape->hw->name, "SoundScape M68K",
- sizeof(sscape->hw->name));
- sscape->hw->name[sizeof(sscape->hw->name) - 1] = '\0';
- sscape->hw->iface = SNDRV_HWDEP_IFACE_SSCAPE;
- sscape->hw->ops.open = sscape_hw_open;
- sscape->hw->ops.release = sscape_hw_release;
- sscape->hw->ops.ioctl = sscape_hw_ioctl;
- sscape->hw->private_data = sscape;
+ printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n",
+ name, sscape->io_base, irq[dev], dma[dev]);
+
+ /*
+ * Check that the user didn't pass us garbage data ...
+ */
+ irq_cfg = get_irq_config(sscape->type, irq[dev]);
+ if (irq_cfg == INVALID_IRQ) {
+ snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
+ return -ENXIO;
+ }
+
+ mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]);
+ if (mpu_irq_cfg == INVALID_IRQ) {
+ snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
+ return -ENXIO;
}
/*
@@ -1141,9 +1035,6 @@
*/
spin_lock_irqsave(&sscape->lock, flags);
- activate_ad1845_unsafe(sscape->io_base);
-
- sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x00); /* disable */
sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e);
sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00);
@@ -1151,15 +1042,23 @@
* Enable and configure the DMA channels ...
*/
sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50);
- dma_cfg = (sscape->ic_type == IC_ODIE ? 0x70 : 0x40);
+ dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70);
sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg);
sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20);
- sscape_write_unsafe(sscape->io_base,
- GA_INTCFG_REG, 0xf0 | (mpu_irq_cfg << 2) | mpu_irq_cfg);
+ mpu_irq_cfg |= mpu_irq_cfg << 2;
+ val = sscape_read_unsafe(sscape->io_base, GA_HMCTL_REG) & 0xF7;
+ if (joystick[dev])
+ val |= 8;
+ sscape_write_unsafe(sscape->io_base, GA_HMCTL_REG, val | 0x10);
+ sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg);
sscape_write_unsafe(sscape->io_base,
GA_CDCFG_REG, 0x09 | DMA_8BIT
| (dma[dev] << 4) | (irq_cfg << 1));
+ /*
+ * Enable the master IRQ ...
+ */
+ sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80);
spin_unlock_irqrestore(&sscape->lock, flags);
@@ -1170,32 +1069,56 @@
err = create_ad1845(card, wss_port[dev], irq[dev],
dma[dev], dma2[dev]);
if (err < 0) {
- printk(KERN_ERR "sscape: No AD1845 device at 0x%lx, IRQ %d\n",
- wss_port[dev], irq[dev]);
+ snd_printk(KERN_ERR
+ "sscape: No AD1845 device at 0x%lx, IRQ %d\n",
+ wss_port[dev], irq[dev]);
goto _release_dma;
}
+ strcpy(card->driver, "SoundScape");
+ strcpy(card->shortname, name);
+ snprintf(card->longname, sizeof(card->longname),
+ "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
+ name, sscape->chip->port, sscape->chip->irq,
+ sscape->chip->dma1, sscape->chip->dma2);
+
#define MIDI_DEVNUM 0
if (sscape->type != SSCAPE_VIVO) {
- err = create_mpu401(card, MIDI_DEVNUM, port[dev], mpu_irq[dev]);
- if (err < 0) {
- printk(KERN_ERR "sscape: Failed to create "
- "MPU-401 device at 0x%lx\n",
- port[dev]);
- goto _release_dma;
+ err = sscape_upload_bootblock(card);
+ if (err >= 0)
+ err = sscape_upload_microcode(card, err);
+
+ if (err == 0) {
+ err = create_mpu401(card, MIDI_DEVNUM, port[dev],
+ mpu_irq[dev]);
+ if (err < 0) {
+ snd_printk(KERN_ERR "sscape: Failed to create "
+ "MPU-401 device at 0x%lx\n",
+ port[dev]);
+ goto _release_dma;
+ }
+
+ /*
+ * Initialize mixer
+ */
+ spin_lock_irqsave(&sscape->lock, flags);
+ sscape->midi_vol = 0;
+ host_write_ctrl_unsafe(sscape->io_base,
+ CMD_SET_MIDI_VOL, 100);
+ host_write_ctrl_unsafe(sscape->io_base,
+ sscape->midi_vol, 100);
+ host_write_ctrl_unsafe(sscape->io_base,
+ CMD_XXX_MIDI_VOL, 100);
+ host_write_ctrl_unsafe(sscape->io_base,
+ sscape->midi_vol, 100);
+ host_write_ctrl_unsafe(sscape->io_base,
+ CMD_SET_EXTMIDI, 100);
+ host_write_ctrl_unsafe(sscape->io_base,
+ 0, 100);
+ host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100);
+
+ set_midi_mode_unsafe(sscape->io_base);
+ spin_unlock_irqrestore(&sscape->lock, flags);
}
-
- /*
- * Enable the master IRQ ...
- */
- sscape_write(sscape, GA_INTENA_REG, 0x80);
-
- /*
- * Initialize mixer
- */
- sscape->midi_vol = 0;
- host_write_ctrl_unsafe(sscape->io_base, CMD_SET_MIDI_VOL, 100);
- host_write_ctrl_unsafe(sscape->io_base, 0, 100);
- host_write_ctrl_unsafe(sscape->io_base, CMD_XXX_MIDI_VOL, 100);
}
/*
@@ -1231,7 +1154,8 @@
mpu_irq[i] == SNDRV_AUTO_IRQ ||
dma[i] == SNDRV_AUTO_DMA) {
printk(KERN_INFO
- "sscape: insufficient parameters, need IO, IRQ, MPU-IRQ and DMA\n");
+ "sscape: insufficient parameters, "
+ "need IO, IRQ, MPU-IRQ and DMA\n");
return 0;
}
@@ -1253,13 +1177,15 @@
sscape->type = SSCAPE;
dma[dev] &= 0x03;
+ snd_card_set_dev(card, pdev);
+
ret = create_sscape(dev, card);
if (ret < 0)
goto _release_card;
- snd_card_set_dev(card, pdev);
- if ((ret = snd_card_register(card)) < 0) {
- printk(KERN_ERR "sscape: Failed to register sound card\n");
+ ret = snd_card_register(card);
+ if (ret < 0) {
+ snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
goto _release_card;
}
dev_set_drvdata(pdev, card);
@@ -1311,36 +1237,20 @@
* Allow this function to fail *quietly* if all the ISA PnP
* devices were configured using module parameters instead.
*/
- if ((idx = get_next_autoindex(idx)) >= SNDRV_CARDS)
+ idx = get_next_autoindex(idx);
+ if (idx >= SNDRV_CARDS)
return -ENOSPC;
/*
- * We have found a candidate ISA PnP card. Now we
- * have to check that it has the devices that we
- * expect it to have.
- *
- * We will NOT try and autoconfigure all of the resources
- * needed and then activate the card as we are assuming that
- * has already been done at boot-time using /proc/isapnp.
- * We shall simply try to give each active card the resources
- * that it wants. This is a sensible strategy for a modular
- * system where unused modules are unloaded regularly.
- *
- * This strategy is utterly useless if we compile the driver
- * into the kernel, of course.
- */
- // printk(KERN_INFO "sscape: %s\n", card->name);
-
- /*
* Check that we still have room for another sound card ...
*/
dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL);
- if (! dev)
+ if (!dev)
return -ENODEV;
if (!pnp_is_active(dev)) {
if (pnp_activate_dev(dev) < 0) {
- printk(KERN_INFO "sscape: device is inactive\n");
+ snd_printk(KERN_INFO "sscape: device is inactive\n");
return -EBUSY;
}
}
@@ -1378,14 +1288,15 @@
wss_port[idx] = pnp_port_start(dev, 1);
dma2[idx] = pnp_dma(dev, 1);
}
+ snd_card_set_dev(card, &pcard->card->dev);
ret = create_sscape(idx, card);
if (ret < 0)
goto _release_card;
- snd_card_set_dev(card, &pcard->card->dev);
- if ((ret = snd_card_register(card)) < 0) {
- printk(KERN_ERR "sscape: Failed to register sound card\n");
+ ret = snd_card_register(card);
+ if (ret < 0) {
+ snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
goto _release_card;
}
diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c
index 5d2ba1b..2ba1897 100644
--- a/sound/isa/wss/wss_lib.c
+++ b/sound/isa/wss/wss_lib.c
@@ -2198,64 +2198,26 @@
static const DECLARE_TLV_DB_SCALE(db_scale_6bit, -9450, 150, 0);
static const DECLARE_TLV_DB_SCALE(db_scale_5bit_12db_max, -3450, 150, 0);
static const DECLARE_TLV_DB_SCALE(db_scale_rec_gain, 0, 150, 0);
-
-static struct snd_kcontrol_new snd_ad1848_controls[] = {
-WSS_DOUBLE("PCM Playback Switch", 0, CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT,
- 7, 7, 1, 1),
-WSS_DOUBLE_TLV("PCM Playback Volume", 0,
- CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1,
- db_scale_6bit),
-WSS_DOUBLE("Aux Playback Switch", 0,
- CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE_TLV("Aux Playback Volume", 0,
- CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 0, 0, 31, 1,
- db_scale_5bit_12db_max),
-WSS_DOUBLE("Aux Playback Switch", 1,
- CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE_TLV("Aux Playback Volume", 1,
- CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1,
- db_scale_5bit_12db_max),
-WSS_DOUBLE_TLV("Capture Volume", 0, CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT,
- 0, 0, 15, 0, db_scale_rec_gain),
-{
- .name = "Capture Source",
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .info = snd_wss_info_mux,
- .get = snd_wss_get_mux,
- .put = snd_wss_put_mux,
-},
-WSS_SINGLE("Loopback Capture Switch", 0, CS4231_LOOPBACK, 0, 1, 0),
-WSS_SINGLE_TLV("Loopback Capture Volume", 0, CS4231_LOOPBACK, 1, 63, 0,
- db_scale_6bit),
-};
+static const DECLARE_TLV_DB_SCALE(db_scale_4bit, -4500, 300, 0);
static struct snd_kcontrol_new snd_wss_controls[] = {
WSS_DOUBLE("PCM Playback Switch", 0,
CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1),
-WSS_DOUBLE("PCM Playback Volume", 0,
- CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1),
-WSS_DOUBLE("Line Playback Switch", 0,
- CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1),
-WSS_DOUBLE("Line Playback Volume", 0,
- CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("PCM Playback Volume", 0,
+ CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 0, 0, 63, 1,
+ db_scale_6bit),
WSS_DOUBLE("Aux Playback Switch", 0,
CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("Aux Playback Volume", 0,
- CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 0, 0, 31, 1),
+WSS_DOUBLE_TLV("Aux Playback Volume", 0,
+ CS4231_AUX1_LEFT_INPUT, CS4231_AUX1_RIGHT_INPUT, 0, 0, 31, 1,
+ db_scale_5bit_12db_max),
WSS_DOUBLE("Aux Playback Switch", 1,
CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 7, 7, 1, 1),
-WSS_DOUBLE("Aux Playback Volume", 1,
- CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1),
-WSS_SINGLE("Mono Playback Switch", 0,
- CS4231_MONO_CTRL, 7, 1, 1),
-WSS_SINGLE("Mono Playback Volume", 0,
- CS4231_MONO_CTRL, 0, 15, 1),
-WSS_SINGLE("Mono Output Playback Switch", 0,
- CS4231_MONO_CTRL, 6, 1, 1),
-WSS_SINGLE("Mono Output Playback Bypass", 0,
- CS4231_MONO_CTRL, 5, 1, 0),
-WSS_DOUBLE("Capture Volume", 0,
- CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 0, 0, 15, 0),
+WSS_DOUBLE_TLV("Aux Playback Volume", 1,
+ CS4231_AUX2_LEFT_INPUT, CS4231_AUX2_RIGHT_INPUT, 0, 0, 31, 1,
+ db_scale_5bit_12db_max),
+WSS_DOUBLE_TLV("Capture Volume", 0, CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT,
+ 0, 0, 15, 0, db_scale_rec_gain),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
@@ -2267,15 +2229,30 @@
CS4231_LEFT_INPUT, CS4231_RIGHT_INPUT, 5, 5, 1, 0),
WSS_SINGLE("Loopback Capture Switch", 0,
CS4231_LOOPBACK, 0, 1, 0),
-WSS_SINGLE("Loopback Capture Volume", 0,
- CS4231_LOOPBACK, 2, 63, 1)
+WSS_SINGLE_TLV("Loopback Capture Volume", 0, CS4231_LOOPBACK, 2, 63, 1,
+ db_scale_6bit),
+WSS_DOUBLE("Line Playback Switch", 0,
+ CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 7, 7, 1, 1),
+WSS_DOUBLE_TLV("Line Playback Volume", 0,
+ CS4231_LEFT_LINE_IN, CS4231_RIGHT_LINE_IN, 0, 0, 31, 1,
+ db_scale_5bit_12db_max),
+WSS_SINGLE("Mono Playback Switch", 0,
+ CS4231_MONO_CTRL, 7, 1, 1),
+WSS_SINGLE_TLV("Mono Playback Volume", 0,
+ CS4231_MONO_CTRL, 0, 15, 1,
+ db_scale_4bit),
+WSS_SINGLE("Mono Output Playback Switch", 0,
+ CS4231_MONO_CTRL, 6, 1, 1),
+WSS_SINGLE("Mono Output Playback Bypass", 0,
+ CS4231_MONO_CTRL, 5, 1, 0),
};
static struct snd_kcontrol_new snd_opti93x_controls[] = {
WSS_DOUBLE("Master Playback Switch", 0,
OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 7, 7, 1, 1),
-WSS_DOUBLE("Master Playback Volume", 0,
- OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1),
+WSS_DOUBLE_TLV("Master Playback Volume", 0,
+ OPTi93X_OUT_LEFT, OPTi93X_OUT_RIGHT, 1, 1, 31, 1,
+ db_scale_6bit),
WSS_DOUBLE("PCM Playback Switch", 0,
CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1),
WSS_DOUBLE("PCM Playback Volume", 0,
@@ -2334,22 +2311,21 @@
if (err < 0)
return err;
}
- else if (chip->hardware & WSS_HW_AD1848_MASK)
- for (idx = 0; idx < ARRAY_SIZE(snd_ad1848_controls); idx++) {
- err = snd_ctl_add(card,
- snd_ctl_new1(&snd_ad1848_controls[idx],
- chip));
- if (err < 0)
- return err;
- }
- else
- for (idx = 0; idx < ARRAY_SIZE(snd_wss_controls); idx++) {
+ else {
+ int count = ARRAY_SIZE(snd_wss_controls);
+
+ /* Use only the first 11 entries on AD1848 */
+ if (chip->hardware & WSS_HW_AD1848_MASK)
+ count = 11;
+
+ for (idx = 0; idx < count; idx++) {
err = snd_ctl_add(card,
snd_ctl_new1(&snd_wss_controls[idx],
chip));
if (err < 0)
return err;
}
+ }
return 0;
}
EXPORT_SYMBOL(snd_wss_mixer);
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index bcf2a06..135a2b7 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -287,18 +287,6 @@
Say Y unless you have 16MB or more RAM or a PCI sound card.
-config SOUND_SSCAPE
- tristate "Ensoniq SoundScape support"
- help
- Answer Y if you have a sound card based on the Ensoniq SoundScape
- chipset. Such cards are being manufactured at least by Ensoniq, Spea
- and Reveal (Reveal makes also other cards).
-
- If you compile the driver into the kernel, you have to add
- "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
- line.
-
-
config SOUND_VMIDI
tristate "Loopback MIDI device support"
help
diff --git a/sound/oss/Makefile b/sound/oss/Makefile
index e0ae4d4..567b8a7 100644
--- a/sound/oss/Makefile
+++ b/sound/oss/Makefile
@@ -13,7 +13,6 @@
obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
obj-$(CONFIG_SOUND_PSS) += pss.o ad1848.o mpu401.o
obj-$(CONFIG_SOUND_TRIX) += trix.o ad1848.o sb_lib.o uart401.o
-obj-$(CONFIG_SOUND_SSCAPE) += sscape.o ad1848.o mpu401.o
obj-$(CONFIG_SOUND_MSS) += ad1848.o
obj-$(CONFIG_SOUND_PAS) += pas2.o sb.o sb_lib.o uart401.o
obj-$(CONFIG_SOUND_SB) += sb.o sb_lib.o uart401.o
diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c
index b2ed875..4153752 100644
--- a/sound/oss/sh_dac_audio.c
+++ b/sound/oss/sh_dac_audio.c
@@ -164,9 +164,6 @@
int free;
int nbytes;
- if (count < 0)
- return -EINVAL;
-
if (!count) {
dac_audio_sync();
return 0;
diff --git a/sound/oss/sscape.c b/sound/oss/sscape.c
deleted file mode 100644
index 30c36d1..0000000
--- a/sound/oss/sscape.c
+++ /dev/null
@@ -1,1480 +0,0 @@
-/*
- * sound/oss/sscape.c
- *
- * Low level driver for Ensoniq SoundScape
- *
- *
- * Copyright (C) by Hannu Savolainen 1993-1997
- *
- * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
- * Version 2 (June 1991). See the "COPYING" file distributed with this software
- * for more info.
- *
- *
- * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed)
- * Sergey Smitienko : ensoniq p'n'p support
- * Christoph Hellwig : adapted to module_init/module_exit
- * Bartlomiej Zolnierkiewicz : added __init to attach_sscape()
- * Chris Rankin : Specify that this module owns the coprocessor
- * Arnaldo C. de Melo : added missing restore_flags in sscape_pnp_upload_file
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include "sound_config.h"
-#include "sound_firmware.h"
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/fcntl.h>
-#include <linux/ctype.h>
-#include <linux/stddef.h>
-#include <linux/kmod.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <linux/wait.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/spinlock.h>
-
-#include "coproc.h"
-
-#include "ad1848.h"
-#include "mpu401.h"
-
-/*
- * I/O ports
- */
-#define MIDI_DATA 0
-#define MIDI_CTRL 1
-#define HOST_CTRL 2
-#define TX_READY 0x02
-#define RX_READY 0x01
-#define HOST_DATA 3
-#define ODIE_ADDR 4
-#define ODIE_DATA 5
-
-/*
- * Indirect registers
- */
-
-#define GA_INTSTAT_REG 0
-#define GA_INTENA_REG 1
-#define GA_DMAA_REG 2
-#define GA_DMAB_REG 3
-#define GA_INTCFG_REG 4
-#define GA_DMACFG_REG 5
-#define GA_CDCFG_REG 6
-#define GA_SMCFGA_REG 7
-#define GA_SMCFGB_REG 8
-#define GA_HMCTL_REG 9
-
-/*
- * DMA channel identifiers (A and B)
- */
-
-#define SSCAPE_DMA_A 0
-#define SSCAPE_DMA_B 1
-
-#define PORT(name) (devc->base+name)
-
-/*
- * Host commands recognized by the OBP microcode
- */
-
-#define CMD_GEN_HOST_ACK 0x80
-#define CMD_GEN_MPU_ACK 0x81
-#define CMD_GET_BOARD_TYPE 0x82
-#define CMD_SET_CONTROL 0x88 /* Old firmware only */
-#define CMD_GET_CONTROL 0x89 /* Old firmware only */
-#define CTL_MASTER_VOL 0
-#define CTL_MIC_MODE 2
-#define CTL_SYNTH_VOL 4
-#define CTL_WAVE_VOL 7
-#define CMD_SET_EXTMIDI 0x8a
-#define CMD_GET_EXTMIDI 0x8b
-#define CMD_SET_MT32 0x8c
-#define CMD_GET_MT32 0x8d
-
-#define CMD_ACK 0x80
-
-#define IC_ODIE 1
-#define IC_OPUS 2
-
-typedef struct sscape_info
-{
- int base, irq, dma;
-
- int codec, codec_irq; /* required to setup pnp cards*/
- int codec_type;
- int ic_type;
- char* raw_buf;
- unsigned long raw_buf_phys;
- int buffsize; /* -------------------------- */
- spinlock_t lock;
- int ok; /* Properly detected */
- int failed;
- int dma_allocated;
- int codec_audiodev;
- int opened;
- int *osp;
- int my_audiodev;
-} sscape_info;
-
-static struct sscape_info adev_info = {
- 0
-};
-
-static struct sscape_info *devc = &adev_info;
-static int sscape_mididev = -1;
-
-/* Some older cards have assigned interrupt bits differently than new ones */
-static char valid_interrupts_old[] = {
- 9, 7, 5, 15
-};
-
-static char valid_interrupts_new[] = {
- 9, 5, 7, 10
-};
-
-static char *valid_interrupts = valid_interrupts_new;
-
-/*
- * See the bottom of the driver. This can be set by spea =0/1.
- */
-
-#ifdef REVEAL_SPEA
-static char old_hardware = 1;
-#else
-static char old_hardware;
-#endif
-
-static void sleep(unsigned howlong)
-{
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(howlong);
-}
-
-static unsigned char sscape_read(struct sscape_info *devc, int reg)
-{
- unsigned long flags;
- unsigned char val;
-
- spin_lock_irqsave(&devc->lock,flags);
- outb(reg, PORT(ODIE_ADDR));
- val = inb(PORT(ODIE_DATA));
- spin_unlock_irqrestore(&devc->lock,flags);
- return val;
-}
-
-static void __sscape_write(int reg, int data)
-{
- outb(reg, PORT(ODIE_ADDR));
- outb(data, PORT(ODIE_DATA));
-}
-
-static void sscape_write(struct sscape_info *devc, int reg, int data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&devc->lock,flags);
- __sscape_write(reg, data);
- spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static unsigned char sscape_pnp_read_codec(sscape_info* devc, unsigned char reg)
-{
- unsigned char res;
- unsigned long flags;
-
- spin_lock_irqsave(&devc->lock,flags);
- outb( reg, devc -> codec);
- res = inb (devc -> codec + 1);
- spin_unlock_irqrestore(&devc->lock,flags);
- return res;
-
-}
-
-static void sscape_pnp_write_codec(sscape_info* devc, unsigned char reg, unsigned char data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&devc->lock,flags);
- outb( reg, devc -> codec);
- outb( data, devc -> codec + 1);
- spin_unlock_irqrestore(&devc->lock,flags);
-}
-
-static void host_open(struct sscape_info *devc)
-{
- outb((0x00), PORT(HOST_CTRL)); /* Put the board to the host mode */
-}
-
-static void host_close(struct sscape_info *devc)
-{
- outb((0x03), PORT(HOST_CTRL)); /* Put the board to the MIDI mode */
-}
-
-static int host_write(struct sscape_info *devc, unsigned char *data, int count)
-{
- unsigned long flags;
- int i, timeout_val;
-
- spin_lock_irqsave(&devc->lock,flags);
- /*
- * Send the command and data bytes
- */
-
- for (i = 0; i < count; i++)
- {
- for (timeout_val = 10000; timeout_val > 0; timeout_val--)
- if (inb(PORT(HOST_CTRL)) & TX_READY)
- break;
-
- if (timeout_val <= 0)
- {
- spin_unlock_irqrestore(&devc->lock,flags);
- return 0;
- }
- outb(data[i], PORT(HOST_DATA));
- }
- spin_unlock_irqrestore(&devc->lock,flags);
- return 1;
-}
-
-static int host_read(struct sscape_info *devc)
-{
- unsigned long flags;
- int timeout_val;
- unsigned char data;
-
- spin_lock_irqsave(&devc->lock,flags);
- /*
- * Read a byte
- */
-
- for (timeout_val = 10000; timeout_val > 0; timeout_val--)
- if (inb(PORT(HOST_CTRL)) & RX_READY)
- break;
-
- if (timeout_val <= 0)
- {
- spin_unlock_irqrestore(&devc->lock,flags);
- return -1;
- }
- data = inb(PORT(HOST_DATA));
- spin_unlock_irqrestore(&devc->lock,flags);
- return data;
-}
-
-#if 0 /* unused */
-static int host_command1(struct sscape_info *devc, int cmd)
-{
- unsigned char buf[10];
- buf[0] = (unsigned char) (cmd & 0xff);
- return host_write(devc, buf, 1);
-}
-#endif /* unused */
-
-
-static int host_command2(struct sscape_info *devc, int cmd, int parm1)
-{
- unsigned char buf[10];
-
- buf[0] = (unsigned char) (cmd & 0xff);
- buf[1] = (unsigned char) (parm1 & 0xff);
-
- return host_write(devc, buf, 2);
-}
-
-static int host_command3(struct sscape_info *devc, int cmd, int parm1, int parm2)
-{
- unsigned char buf[10];
-
- buf[0] = (unsigned char) (cmd & 0xff);
- buf[1] = (unsigned char) (parm1 & 0xff);
- buf[2] = (unsigned char) (parm2 & 0xff);
- return host_write(devc, buf, 3);
-}
-
-static void set_mt32(struct sscape_info *devc, int value)
-{
- host_open(devc);
- host_command2(devc, CMD_SET_MT32, value ? 1 : 0);
- if (host_read(devc) != CMD_ACK)
- {
- /* printk( "SNDSCAPE: Setting MT32 mode failed\n"); */
- }
- host_close(devc);
-}
-
-static void set_control(struct sscape_info *devc, int ctrl, int value)
-{
- host_open(devc);
- host_command3(devc, CMD_SET_CONTROL, ctrl, value);
- if (host_read(devc) != CMD_ACK)
- {
- /* printk( "SNDSCAPE: Setting control (%d) failed\n", ctrl); */
- }
- host_close(devc);
-}
-
-static void do_dma(struct sscape_info *devc, int dma_chan, unsigned long buf, int blk_size, int mode)
-{
- unsigned char temp;
-
- if (dma_chan != SSCAPE_DMA_A)
- {
- printk(KERN_WARNING "soundscape: Tried to use DMA channel != A. Why?\n");
- return;
- }
- audio_devs[devc->codec_audiodev]->flags &= ~DMA_AUTOMODE;
- DMAbuf_start_dma(devc->codec_audiodev, buf, blk_size, mode);
- audio_devs[devc->codec_audiodev]->flags |= DMA_AUTOMODE;
-
- temp = devc->dma << 4; /* Setup DMA channel select bits */
- if (devc->dma <= 3)
- temp |= 0x80; /* 8 bit DMA channel */
-
- temp |= 1; /* Trigger DMA */
- sscape_write(devc, GA_DMAA_REG, temp);
- temp &= 0xfe; /* Clear DMA trigger */
- sscape_write(devc, GA_DMAA_REG, temp);
-}
-
-static int verify_mpu(struct sscape_info *devc)
-{
- /*
- * The SoundScape board could be in three modes (MPU, 8250 and host).
- * If the card is not in the MPU mode, enabling the MPU driver will
- * cause infinite loop (the driver believes that there is always some
- * received data in the buffer.
- *
- * Detect this by looking if there are more than 10 received MIDI bytes
- * (0x00) in the buffer.
- */
-
- int i;
-
- for (i = 0; i < 10; i++)
- {
- if (inb(devc->base + HOST_CTRL) & 0x80)
- return 1;
-
- if (inb(devc->base) != 0x00)
- return 1;
- }
- printk(KERN_WARNING "SoundScape: The device is not in the MPU-401 mode\n");
- return 0;
-}
-
-static int sscape_coproc_open(void *dev_info, int sub_device)
-{
- if (sub_device == COPR_MIDI)
- {
- set_mt32(devc, 0);
- if (!verify_mpu(devc))
- return -EIO;
- }
- return 0;
-}
-
-static void sscape_coproc_close(void *dev_info, int sub_device)
-{
- struct sscape_info *devc = dev_info;
- unsigned long flags;
-
- spin_lock_irqsave(&devc->lock,flags);
- if (devc->dma_allocated)
- {
- __sscape_write(GA_DMAA_REG, 0x20); /* DMA channel disabled */
- devc->dma_allocated = 0;
- }
- spin_unlock_irqrestore(&devc->lock,flags);
- return;
-}
-
-static void sscape_coproc_reset(void *dev_info)
-{
-}
-
-static int sscape_download_boot(struct sscape_info *devc, unsigned char *block, int size, int flag)
-{
- unsigned long flags;
- unsigned char temp;
- volatile int done, timeout_val;
- static unsigned char codec_dma_bits;
-
- if (flag & CPF_FIRST)
- {
- /*
- * First block. Have to allocate DMA and to reset the board
- * before continuing.
- */
-
- spin_lock_irqsave(&devc->lock,flags);
- codec_dma_bits = sscape_read(devc, GA_CDCFG_REG);
-
- if (devc->dma_allocated == 0)
- devc->dma_allocated = 1;
-
- spin_unlock_irqrestore(&devc->lock,flags);
-
- sscape_write(devc, GA_HMCTL_REG,
- (temp = sscape_read(devc, GA_HMCTL_REG)) & 0x3f); /*Reset */
-
- for (timeout_val = 10000; timeout_val > 0; timeout_val--)
- sscape_read(devc, GA_HMCTL_REG); /* Delay */
-
- /* Take board out of reset */
- sscape_write(devc, GA_HMCTL_REG,
- (temp = sscape_read(devc, GA_HMCTL_REG)) | 0x80);
- }
- /*
- * Transfer one code block using DMA
- */
- if (audio_devs[devc->codec_audiodev]->dmap_out->raw_buf == NULL)
- {
- printk(KERN_WARNING "soundscape: DMA buffer not available\n");
- return 0;
- }
- memcpy(audio_devs[devc->codec_audiodev]->dmap_out->raw_buf, block, size);
-
- spin_lock_irqsave(&devc->lock,flags);
-
- /******** INTERRUPTS DISABLED NOW ********/
-
- do_dma(devc, SSCAPE_DMA_A,
- audio_devs[devc->codec_audiodev]->dmap_out->raw_buf_phys,
- size, DMA_MODE_WRITE);
-
- /*
- * Wait until transfer completes.
- */
-
- done = 0;
- timeout_val = 30;
- while (!done && timeout_val-- > 0)
- {
- int resid;
-
- if (HZ / 50)
- sleep(HZ / 50);
- clear_dma_ff(devc->dma);
- if ((resid = get_dma_residue(devc->dma)) == 0)
- done = 1;
- }
-
- spin_unlock_irqrestore(&devc->lock,flags);
- if (!done)
- return 0;
-
- if (flag & CPF_LAST)
- {
- /*
- * Take the board out of reset
- */
- outb((0x00), PORT(HOST_CTRL));
- outb((0x00), PORT(MIDI_CTRL));
-
- temp = sscape_read(devc, GA_HMCTL_REG);
- temp |= 0x40;
- sscape_write(devc, GA_HMCTL_REG, temp); /* Kickstart the board */
-
- /*
- * Wait until the ODB wakes up
- */
- spin_lock_irqsave(&devc->lock,flags);
- done = 0;
- timeout_val = 5 * HZ;
- while (!done && timeout_val-- > 0)
- {
- unsigned char x;
-
- sleep(1);
- x = inb(PORT(HOST_DATA));
- if (x == 0xff || x == 0xfe) /* OBP startup acknowledge */
- {
- DDB(printk("Soundscape: Acknowledge = %x\n", x));
- done = 1;
- }
- }
- sscape_write(devc, GA_CDCFG_REG, codec_dma_bits);
-
- spin_unlock_irqrestore(&devc->lock,flags);
- if (!done)
- {
- printk(KERN_ERR "soundscape: The OBP didn't respond after code download\n");
- return 0;
- }
- spin_lock_irqsave(&devc->lock,flags);
- done = 0;
- timeout_val = 5 * HZ;
- while (!done && timeout_val-- > 0)
- {
- sleep(1);
- if (inb(PORT(HOST_DATA)) == 0xfe) /* Host startup acknowledge */
- done = 1;
- }
- spin_unlock_irqrestore(&devc->lock,flags);
- if (!done)
- {
- printk(KERN_ERR "soundscape: OBP Initialization failed.\n");
- return 0;
- }
- printk(KERN_INFO "SoundScape board initialized OK\n");
- set_control(devc, CTL_MASTER_VOL, 100);
- set_control(devc, CTL_SYNTH_VOL, 100);
-
-#ifdef SSCAPE_DEBUG3
- /*
- * Temporary debugging aid. Print contents of the registers after
- * downloading the code.
- */
- {
- int i;
-
- for (i = 0; i < 13; i++)
- printk("I%d = %02x (new value)\n", i, sscape_read(devc, i));
- }
-#endif
-
- }
- return 1;
-}
-
-static int download_boot_block(void *dev_info, copr_buffer * buf)
-{
- if (buf->len <= 0 || buf->len > sizeof(buf->data))
- return -EINVAL;
-
- if (!sscape_download_boot(devc, buf->data, buf->len, buf->flags))
- {
- printk(KERN_ERR "soundscape: Unable to load microcode block to the OBP.\n");
- return -EIO;
- }
- return 0;
-}
-
-static int sscape_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local)
-{
- copr_buffer *buf;
- int err;
-
- switch (cmd)
- {
- case SNDCTL_COPR_RESET:
- sscape_coproc_reset(dev_info);
- return 0;
-
- case SNDCTL_COPR_LOAD:
- buf = (copr_buffer *) vmalloc(sizeof(copr_buffer));
- if (buf == NULL)
- return -ENOSPC;
- if (copy_from_user(buf, arg, sizeof(copr_buffer)))
- {
- vfree(buf);
- return -EFAULT;
- }
- err = download_boot_block(dev_info, buf);
- vfree(buf);
- return err;
-
- default:
- return -EINVAL;
- }
-}
-
-static coproc_operations sscape_coproc_operations =
-{
- "SoundScape M68K",
- THIS_MODULE,
- sscape_coproc_open,
- sscape_coproc_close,
- sscape_coproc_ioctl,
- sscape_coproc_reset,
- &adev_info
-};
-
-static struct resource *sscape_ports;
-static int sscape_is_pnp;
-
-static void __init attach_sscape(struct address_info *hw_config)
-{
-#ifndef SSCAPE_REGS
- /*
- * Config register values for Spea/V7 Media FX and Ensoniq S-2000.
- * These values are card
- * dependent. If you have another SoundScape based card, you have to
- * find the correct values. Do the following:
- * - Compile this driver with SSCAPE_DEBUG1 defined.
- * - Shut down and power off your machine.
- * - Boot with DOS so that the SSINIT.EXE program is run.
- * - Warm boot to {Linux|SYSV|BSD} and write down the lines displayed
- * when detecting the SoundScape.
- * - Modify the following list to use the values printed during boot.
- * Undefine the SSCAPE_DEBUG1
- */
-#define SSCAPE_REGS { \
-/* I0 */ 0x00, \
-/* I1 */ 0xf0, /* Note! Ignored. Set always to 0xf0 */ \
-/* I2 */ 0x20, /* Note! Ignored. Set always to 0x20 */ \
-/* I3 */ 0x20, /* Note! Ignored. Set always to 0x20 */ \
-/* I4 */ 0xf5, /* Ignored */ \
-/* I5 */ 0x10, \
-/* I6 */ 0x00, \
-/* I7 */ 0x2e, /* I7 MEM config A. Likely to vary between models */ \
-/* I8 */ 0x00, /* I8 MEM config B. Likely to vary between models */ \
-/* I9 */ 0x40 /* Ignored */ \
- }
-#endif
-
- unsigned long flags;
- static unsigned char regs[10] = SSCAPE_REGS;
-
- int i, irq_bits = 0xff;
-
- if (old_hardware)
- {
- valid_interrupts = valid_interrupts_old;
- conf_printf("Ensoniq SoundScape (old)", hw_config);
- }
- else
- conf_printf("Ensoniq SoundScape", hw_config);
-
- for (i = 0; i < 4; i++)
- {
- if (hw_config->irq == valid_interrupts[i])
- {
- irq_bits = i;
- break;
- }
- }
- if (hw_config->irq > 15 || (regs[4] = irq_bits == 0xff))
- {
- printk(KERN_ERR "Invalid IRQ%d\n", hw_config->irq);
- release_region(devc->base, 2);
- release_region(devc->base + 2, 6);
- if (sscape_is_pnp)
- release_region(devc->codec, 2);
- return;
- }
-
- if (!sscape_is_pnp) {
-
- spin_lock_irqsave(&devc->lock,flags);
- /* Host interrupt enable */
- sscape_write(devc, 1, 0xf0); /* All interrupts enabled */
- /* DMA A status/trigger register */
- sscape_write(devc, 2, 0x20); /* DMA channel disabled */
- /* DMA B status/trigger register */
- sscape_write(devc, 3, 0x20); /* DMA channel disabled */
- /* Host interrupt config reg */
- sscape_write(devc, 4, 0xf0 | (irq_bits << 2) | irq_bits);
- /* Don't destroy CD-ROM DMA config bits (0xc0) */
- sscape_write(devc, 5, (regs[5] & 0x3f) | (sscape_read(devc, 5) & 0xc0));
- /* CD-ROM config (WSS codec actually) */
- sscape_write(devc, 6, regs[6]);
- sscape_write(devc, 7, regs[7]);
- sscape_write(devc, 8, regs[8]);
- /* Master control reg. Don't modify CR-ROM bits. Disable SB emul */
- sscape_write(devc, 9, (sscape_read(devc, 9) & 0xf0) | 0x08);
- spin_unlock_irqrestore(&devc->lock,flags);
- }
-#ifdef SSCAPE_DEBUG2
- /*
- * Temporary debugging aid. Print contents of the registers after
- * changing them.
- */
- {
- int i;
-
- for (i = 0; i < 13; i++)
- printk("I%d = %02x (new value)\n", i, sscape_read(devc, i));
- }
-#endif
-
- if (probe_mpu401(hw_config, sscape_ports))
- hw_config->always_detect = 1;
- hw_config->name = "SoundScape";
-
- hw_config->irq *= -1; /* Negative value signals IRQ sharing */
- attach_mpu401(hw_config, THIS_MODULE);
- hw_config->irq *= -1; /* Restore it */
-
- if (hw_config->slots[1] != -1) /* The MPU driver installed itself */
- {
- sscape_mididev = hw_config->slots[1];
- midi_devs[hw_config->slots[1]]->coproc = &sscape_coproc_operations;
- }
- sscape_write(devc, GA_INTENA_REG, 0x80); /* Master IRQ enable */
- devc->ok = 1;
- devc->failed = 0;
-}
-
-static int detect_ga(sscape_info * devc)
-{
- unsigned char save;
-
- DDB(printk("Entered Soundscape detect_ga(%x)\n", devc->base));
-
- /*
- * First check that the address register of "ODIE" is
- * there and that it has exactly 4 writable bits.
- * First 4 bits
- */
-
- if ((save = inb(PORT(ODIE_ADDR))) & 0xf0)
- {
- DDB(printk("soundscape: Detect error A\n"));
- return 0;
- }
- outb((0x00), PORT(ODIE_ADDR));
- if (inb(PORT(ODIE_ADDR)) != 0x00)
- {
- DDB(printk("soundscape: Detect error B\n"));
- return 0;
- }
- outb((0xff), PORT(ODIE_ADDR));
- if (inb(PORT(ODIE_ADDR)) != 0x0f)
- {
- DDB(printk("soundscape: Detect error C\n"));
- return 0;
- }
- outb((save), PORT(ODIE_ADDR));
-
- /*
- * Now verify that some indirect registers return zero on some bits.
- * This may break the driver with some future revisions of "ODIE" but...
- */
-
- if (sscape_read(devc, 0) & 0x0c)
- {
- DDB(printk("soundscape: Detect error D (%x)\n", sscape_read(devc, 0)));
- return 0;
- }
- if (sscape_read(devc, 1) & 0x0f)
- {
- DDB(printk("soundscape: Detect error E\n"));
- return 0;
- }
- if (sscape_read(devc, 5) & 0x0f)
- {
- DDB(printk("soundscape: Detect error F\n"));
- return 0;
- }
- return 1;
-}
-
-static int sscape_read_host_ctrl(sscape_info* devc)
-{
- return host_read(devc);
-}
-
-static void sscape_write_host_ctrl2(sscape_info *devc, int a, int b)
-{
- host_command2(devc, a, b);
-}
-
-static int sscape_alloc_dma(sscape_info *devc)
-{
- char *start_addr, *end_addr;
- int dma_pagesize;
- int sz, size;
- struct page *page;
-
- if (devc->raw_buf != NULL) return 0; /* Already done */
- dma_pagesize = (devc->dma < 4) ? (64 * 1024) : (128 * 1024);
- devc->raw_buf = NULL;
- devc->buffsize = 8192*4;
- if (devc->buffsize > dma_pagesize) devc->buffsize = dma_pagesize;
- start_addr = NULL;
- /*
- * Now loop until we get a free buffer. Try to get smaller buffer if
- * it fails. Don't accept smaller than 8k buffer for performance
- * reasons.
- */
- while (start_addr == NULL && devc->buffsize > PAGE_SIZE) {
- for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1);
- devc->buffsize = PAGE_SIZE * (1 << sz);
- start_addr = (char *) __get_free_pages(GFP_ATOMIC|GFP_DMA, sz);
- if (start_addr == NULL) devc->buffsize /= 2;
- }
-
- if (start_addr == NULL) {
- printk(KERN_ERR "sscape pnp init error: Couldn't allocate DMA buffer\n");
- return 0;
- } else {
- /* make some checks */
- end_addr = start_addr + devc->buffsize - 1;
- /* now check if it fits into the same dma-pagesize */
-
- if (((long) start_addr & ~(dma_pagesize - 1)) != ((long) end_addr & ~(dma_pagesize - 1))
- || end_addr >= (char *) (MAX_DMA_ADDRESS)) {
- printk(KERN_ERR "sscape pnp: Got invalid address 0x%lx for %db DMA-buffer\n", (long) start_addr, devc->buffsize);
- return 0;
- }
- }
- devc->raw_buf = start_addr;
- devc->raw_buf_phys = virt_to_bus(start_addr);
-
- for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++)
- SetPageReserved(page);
- return 1;
-}
-
-static void sscape_free_dma(sscape_info *devc)
-{
- int sz, size;
- unsigned long start_addr, end_addr;
- struct page *page;
-
- if (devc->raw_buf == NULL) return;
- for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1);
- start_addr = (unsigned long) devc->raw_buf;
- end_addr = start_addr + devc->buffsize;
-
- for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++)
- ClearPageReserved(page);
-
- free_pages((unsigned long) devc->raw_buf, sz);
- devc->raw_buf = NULL;
-}
-
-/* Intel version !!!!!!!!! */
-
-static int sscape_start_dma(int chan, unsigned long physaddr, int count, int dma_mode)
-{
- unsigned long flags;
-
- flags = claim_dma_lock();
- disable_dma(chan);
- clear_dma_ff(chan);
- set_dma_mode(chan, dma_mode);
- set_dma_addr(chan, physaddr);
- set_dma_count(chan, count);
- enable_dma(chan);
- release_dma_lock(flags);
- return 0;
-}
-
-static void sscape_pnp_start_dma(sscape_info* devc, int arg )
-{
- int reg;
- if (arg == 0) reg = 2;
- else reg = 3;
-
- sscape_write(devc, reg, sscape_read( devc, reg) | 0x01);
- sscape_write(devc, reg, sscape_read( devc, reg) & 0xFE);
-}
-
-static int sscape_pnp_wait_dma (sscape_info* devc, int arg )
-{
- int reg;
- unsigned long i;
- unsigned char d;
-
- if (arg == 0) reg = 2;
- else reg = 3;
-
- sleep ( 1 );
- i = 0;
- do {
- d = sscape_read(devc, reg) & 1;
- if ( d == 1) break;
- i++;
- } while (i < 500000);
- d = sscape_read(devc, reg) & 1;
- return d;
-}
-
-static int sscape_pnp_alloc_dma(sscape_info* devc)
-{
- /* printk(KERN_INFO "sscape: requesting dma\n"); */
- if (request_dma(devc -> dma, "sscape")) return 0;
- /* printk(KERN_INFO "sscape: dma channel allocated\n"); */
- if (!sscape_alloc_dma(devc)) {
- free_dma(devc -> dma);
- return 0;
- };
- return 1;
-}
-
-static void sscape_pnp_free_dma(sscape_info* devc)
-{
- sscape_free_dma( devc);
- free_dma(devc -> dma );
- /* printk(KERN_INFO "sscape: dma released\n"); */
-}
-
-static int sscape_pnp_upload_file(sscape_info* devc, char* fn)
-{
- int done = 0;
- int timeout_val;
- char* data,*dt;
- int len,l;
- unsigned long flags;
-
- sscape_write( devc, 9, sscape_read(devc, 9 ) & 0x3F );
- sscape_write( devc, 2, (devc -> dma << 4) | 0x80 );
- sscape_write( devc, 3, 0x20 );
- sscape_write( devc, 9, sscape_read( devc, 9 ) | 0x80 );
-
- len = mod_firmware_load(fn, &data);
- if (len == 0) {
- printk(KERN_ERR "sscape: file not found: %s\n", fn);
- return 0;
- }
- dt = data;
- spin_lock_irqsave(&devc->lock,flags);
- while ( len > 0 ) {
- if (len > devc -> buffsize) l = devc->buffsize;
- else l = len;
- len -= l;
- memcpy(devc->raw_buf, dt, l); dt += l;
- sscape_start_dma(devc->dma, devc->raw_buf_phys, l, 0x48);
- sscape_pnp_start_dma ( devc, 0 );
- if (sscape_pnp_wait_dma ( devc, 0 ) == 0) {
- spin_unlock_irqrestore(&devc->lock,flags);
- return 0;
- }
- }
-
- spin_unlock_irqrestore(&devc->lock,flags);
- vfree(data);
-
- outb(0, devc -> base + 2);
- outb(0, devc -> base);
-
- sscape_write ( devc, 9, sscape_read( devc, 9 ) | 0x40);
-
- timeout_val = 5 * HZ;
- while (!done && timeout_val-- > 0)
- {
- unsigned char x;
- sleep(1);
- x = inb( devc -> base + 3);
- if (x == 0xff || x == 0xfe) /* OBP startup acknowledge */
- {
- //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x);
- done = 1;
- }
- }
- timeout_val = 5 * HZ;
- done = 0;
- while (!done && timeout_val-- > 0)
- {
- unsigned char x;
- sleep(1);
- x = inb( devc -> base + 3);
- if (x == 0xfe) /* OBP startup acknowledge */
- {
- //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x);
- done = 1;
- }
- }
-
- if ( !done ) printk(KERN_ERR "soundscape: OBP Initialization failed.\n");
-
- sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40);
- sscape_write( devc, 3, (devc -> dma << 4) + 0x80);
- return 1;
-}
-
-static void __init sscape_pnp_init_hw(sscape_info* devc)
-{
- unsigned char midi_irq = 0, sb_irq = 0;
- unsigned i;
- static char code_file_name[23] = "/sndscape/sndscape.cox";
-
- int sscape_joystic_enable = 0x7f;
- int sscape_mic_enable = 0;
- int sscape_ext_midi = 0;
-
- if ( !sscape_pnp_alloc_dma(devc) ) {
- printk(KERN_ERR "sscape: faild to allocate dma\n");
- return;
- }
-
- for (i = 0; i < 4; i++) {
- if ( devc -> irq == valid_interrupts[i] )
- midi_irq = i;
- if ( devc -> codec_irq == valid_interrupts[i] )
- sb_irq = i;
- }
-
- sscape_write( devc, 5, 0x50);
- sscape_write( devc, 7, 0x2e);
- sscape_write( devc, 8, 0x00);
-
- sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40);
- sscape_write( devc, 3, ( devc -> dma << 4) | 0x80);
-
- sscape_write (devc, 4, 0xF0 | (midi_irq<<2) | midi_irq);
-
- i = 0x10; //sscape_read(devc, 9) & (devc->ic_type == IC_ODIE ? 0xf0 : 0xc0);
- if (sscape_joystic_enable) i |= 8;
-
- sscape_write (devc, 9, i);
- sscape_write (devc, 6, 0x80);
- sscape_write (devc, 1, 0x80);
-
- if (devc -> codec_type == 2) {
- sscape_pnp_write_codec( devc, 0x0C, 0x50);
- sscape_pnp_write_codec( devc, 0x10, sscape_pnp_read_codec( devc, 0x10) & 0x3F);
- sscape_pnp_write_codec( devc, 0x11, sscape_pnp_read_codec( devc, 0x11) | 0xC0);
- sscape_pnp_write_codec( devc, 29, 0x20);
- }
-
- if (sscape_pnp_upload_file(devc, "/sndscape/scope.cod") == 0 ) {
- printk(KERN_ERR "sscape: faild to upload file /sndscape/scope.cod\n");
- sscape_pnp_free_dma(devc);
- return;
- }
-
- i = sscape_read_host_ctrl( devc );
-
- if ( (i & 0x0F) > 7 ) {
- printk(KERN_ERR "sscape: scope.cod faild\n");
- sscape_pnp_free_dma(devc);
- return;
- }
- if ( i & 0x10 ) sscape_write( devc, 7, 0x2F);
- code_file_name[21] = (char) ( i & 0x0F) + 0x30;
- if (sscape_pnp_upload_file( devc, code_file_name) == 0) {
- printk(KERN_ERR "sscape: faild to upload file %s\n", code_file_name);
- sscape_pnp_free_dma(devc);
- return;
- }
-
- if (devc->ic_type != IC_ODIE) {
- sscape_pnp_write_codec( devc, 10, (sscape_pnp_read_codec(devc, 10) & 0x7f) |
- ( sscape_mic_enable == 0 ? 0x00 : 0x80) );
- }
- sscape_write_host_ctrl2( devc, 0x84, 0x64 ); /* MIDI volume */
- sscape_write_host_ctrl2( devc, 0x86, 0x64 ); /* MIDI volume?? */
- sscape_write_host_ctrl2( devc, 0x8A, sscape_ext_midi);
-
- sscape_pnp_write_codec ( devc, 6, 0x3f ); //WAV_VOL
- sscape_pnp_write_codec ( devc, 7, 0x3f ); //WAV_VOL
- sscape_pnp_write_codec ( devc, 2, 0x1F ); //WD_CDXVOLL
- sscape_pnp_write_codec ( devc, 3, 0x1F ); //WD_CDXVOLR
-
- if (devc -> codec_type == 1) {
- sscape_pnp_write_codec ( devc, 4, 0x1F );
- sscape_pnp_write_codec ( devc, 5, 0x1F );
- sscape_write_host_ctrl2( devc, 0x88, sscape_mic_enable);
- } else {
- int t;
- sscape_pnp_write_codec ( devc, 0x10, 0x1F << 1);
- sscape_pnp_write_codec ( devc, 0x11, 0xC0 | (0x1F << 1));
-
- t = sscape_pnp_read_codec( devc, 0x00) & 0xDF;
- if ( (sscape_mic_enable == 0)) t |= 0;
- else t |= 0x20;
- sscape_pnp_write_codec ( devc, 0x00, t);
- t = sscape_pnp_read_codec( devc, 0x01) & 0xDF;
- if ( (sscape_mic_enable == 0) ) t |= 0;
- else t |= 0x20;
- sscape_pnp_write_codec ( devc, 0x01, t);
- sscape_pnp_write_codec ( devc, 0x40 | 29 , 0x20);
- outb(0, devc -> codec);
- }
- if (devc -> ic_type == IC_OPUS ) {
- int i = sscape_read( devc, 9 );
- sscape_write( devc, 9, i | 3 );
- sscape_write( devc, 3, 0x40);
-
- if (request_region(0x228, 1, "sscape setup junk")) {
- outb(0, 0x228);
- release_region(0x228,1);
- }
- sscape_write( devc, 3, (devc -> dma << 4) | 0x80);
- sscape_write( devc, 9, i );
- }
-
- host_close ( devc );
- sscape_pnp_free_dma(devc);
-}
-
-static int __init detect_sscape_pnp(sscape_info* devc)
-{
- long i, irq_bits = 0xff;
- unsigned int d;
-
- DDB(printk("Entered detect_sscape_pnp(%x)\n", devc->base));
-
- if (!request_region(devc->codec, 2, "sscape codec")) {
- printk(KERN_ERR "detect_sscape_pnp: port %x is not free\n", devc->codec);
- return 0;
- }
-
- if ((inb(devc->base + 2) & 0x78) != 0)
- goto fail;
-
- d = inb ( devc -> base + 4) & 0xF0;
- if (d & 0x80)
- goto fail;
-
- if (d == 0) {
- devc->codec_type = 1;
- devc->ic_type = IC_ODIE;
- } else if ( (d & 0x60) != 0) {
- devc->codec_type = 2;
- devc->ic_type = IC_OPUS;
- } else if ( (d & 0x40) != 0) { /* WTF? */
- devc->codec_type = 2;
- devc->ic_type = IC_ODIE;
- } else
- goto fail;
-
- sscape_is_pnp = 1;
-
- outb(0xFA, devc -> base+4);
- if ((inb( devc -> base+4) & 0x9F) != 0x0A)
- goto fail;
- outb(0xFE, devc -> base+4);
- if ( (inb(devc -> base+4) & 0x9F) != 0x0E)
- goto fail;
- if ( (inb(devc -> base+5) & 0x9F) != 0x0E)
- goto fail;
-
- if (devc->codec_type == 2) {
- if (devc->codec != devc->base + 8) {
- printk("soundscape warning: incorrect codec port specified\n");
- goto fail;
- }
- d = 0x10 | (sscape_read(devc, 9) & 0xCF);
- sscape_write(devc, 9, d);
- sscape_write(devc, 6, 0x80);
- } else {
- //todo: check codec is not base + 8
- }
-
- d = (sscape_read(devc, 9) & 0x3F) | 0xC0;
- sscape_write(devc, 9, d);
-
- for (i = 0; i < 550000; i++)
- if ( !(inb(devc -> codec) & 0x80) ) break;
-
- d = inb(devc -> codec);
- if (d & 0x80)
- goto fail;
- if ( inb(devc -> codec + 2) == 0xFF)
- goto fail;
-
- sscape_write(devc, 9, sscape_read(devc, 9) & 0x3F );
-
- d = inb(devc -> codec) & 0x80;
- if ( d == 0) {
- printk(KERN_INFO "soundscape: hardware detected\n");
- valid_interrupts = valid_interrupts_new;
- } else {
- printk(KERN_INFO "soundscape: board looks like media fx\n");
- valid_interrupts = valid_interrupts_old;
- old_hardware = 1;
- }
-
- sscape_write( devc, 9, 0xC0 | (sscape_read(devc, 9) & 0x3F) );
-
- for (i = 0; i < 550000; i++)
- if ( !(inb(devc -> codec) & 0x80))
- break;
-
- sscape_pnp_init_hw(devc);
-
- for (i = 0; i < 4; i++)
- {
- if (devc->codec_irq == valid_interrupts[i]) {
- irq_bits = i;
- break;
- }
- }
- sscape_write(devc, GA_INTENA_REG, 0x00);
- sscape_write(devc, GA_DMACFG_REG, 0x50);
- sscape_write(devc, GA_DMAA_REG, 0x70);
- sscape_write(devc, GA_DMAB_REG, 0x20);
- sscape_write(devc, GA_INTCFG_REG, 0xf0);
- sscape_write(devc, GA_CDCFG_REG, 0x89 | (devc->dma << 4) | (irq_bits << 1));
-
- sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 0) | 0x20);
- sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 1) | 0x20);
-
- return 1;
-fail:
- release_region(devc->codec, 2);
- return 0;
-}
-
-static int __init probe_sscape(struct address_info *hw_config)
-{
- devc->base = hw_config->io_base;
- devc->irq = hw_config->irq;
- devc->dma = hw_config->dma;
- devc->osp = hw_config->osp;
-
-#ifdef SSCAPE_DEBUG1
- /*
- * Temporary debugging aid. Print contents of the registers before
- * changing them.
- */
- {
- int i;
-
- for (i = 0; i < 13; i++)
- printk("I%d = %02x (old value)\n", i, sscape_read(devc, i));
- }
-#endif
- devc->failed = 1;
-
- sscape_ports = request_region(devc->base, 2, "mpu401");
- if (!sscape_ports)
- return 0;
-
- if (!request_region(devc->base + 2, 6, "SoundScape")) {
- release_region(devc->base, 2);
- return 0;
- }
-
- if (!detect_ga(devc)) {
- if (detect_sscape_pnp(devc))
- return 1;
- release_region(devc->base, 2);
- release_region(devc->base + 2, 6);
- return 0;
- }
-
- if (old_hardware) /* Check that it's really an old Spea/Reveal card. */
- {
- unsigned char tmp;
- int cc;
-
- if (!((tmp = sscape_read(devc, GA_HMCTL_REG)) & 0xc0))
- {
- sscape_write(devc, GA_HMCTL_REG, tmp | 0x80);
- for (cc = 0; cc < 200000; ++cc)
- inb(devc->base + ODIE_ADDR);
- }
- }
- return 1;
-}
-
-static int __init init_ss_ms_sound(struct address_info *hw_config)
-{
- int i, irq_bits = 0xff;
- int ad_flags = 0;
- struct resource *ports;
-
- if (devc->failed)
- {
- printk(KERN_ERR "soundscape: Card not detected\n");
- return 0;
- }
- if (devc->ok == 0)
- {
- printk(KERN_ERR "soundscape: Invalid initialization order.\n");
- return 0;
- }
- for (i = 0; i < 4; i++)
- {
- if (hw_config->irq == valid_interrupts[i])
- {
- irq_bits = i;
- break;
- }
- }
- if (irq_bits == 0xff) {
- printk(KERN_ERR "soundscape: Invalid MSS IRQ%d\n", hw_config->irq);
- return 0;
- }
-
- if (old_hardware)
- ad_flags = 0x12345677; /* Tell that we may have a CS4248 chip (Spea-V7 Media FX) */
- else if (sscape_is_pnp)
- ad_flags = 0x87654321; /* Tell that we have a soundscape pnp with 1845 chip */
-
- ports = request_region(hw_config->io_base, 4, "ad1848");
- if (!ports) {
- printk(KERN_ERR "soundscape: ports busy\n");
- return 0;
- }
-
- if (!ad1848_detect(ports, &ad_flags, hw_config->osp)) {
- release_region(hw_config->io_base, 4);
- return 0;
- }
-
- if (!sscape_is_pnp) /*pnp is already setup*/
- {
- /*
- * Setup the DMA polarity.
- */
- sscape_write(devc, GA_DMACFG_REG, 0x50);
-
- /*
- * Take the gate-array off of the DMA channel.
- */
- sscape_write(devc, GA_DMAB_REG, 0x20);
-
- /*
- * Init the AD1848 (CD-ROM) config reg.
- */
- sscape_write(devc, GA_CDCFG_REG, 0x89 | (hw_config->dma << 4) | (irq_bits << 1));
- }
-
- if (hw_config->irq == devc->irq)
- printk(KERN_WARNING "soundscape: Warning! The WSS mode can't share IRQ with MIDI\n");
-
- hw_config->slots[0] = ad1848_init(
- sscape_is_pnp ? "SoundScape" : "SoundScape PNP",
- ports,
- hw_config->irq,
- hw_config->dma,
- hw_config->dma,
- 0,
- devc->osp,
- THIS_MODULE);
-
-
- if (hw_config->slots[0] != -1) /* The AD1848 driver installed itself */
- {
- audio_devs[hw_config->slots[0]]->coproc = &sscape_coproc_operations;
- devc->codec_audiodev = hw_config->slots[0];
- devc->my_audiodev = hw_config->slots[0];
-
- /* Set proper routings here (what are they) */
- AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE);
- }
-
-#ifdef SSCAPE_DEBUG5
- /*
- * Temporary debugging aid. Print contents of the registers
- * after the AD1848 device has been initialized.
- */
- {
- int i;
-
- for (i = 0; i < 13; i++)
- printk("I%d = %02x\n", i, sscape_read(devc, i));
- }
-#endif
- return 1;
-}
-
-static void __exit unload_sscape(struct address_info *hw_config)
-{
- release_region(devc->base + 2, 6);
- unload_mpu401(hw_config);
- if (sscape_is_pnp)
- release_region(devc->codec, 2);
-}
-
-static void __exit unload_ss_ms_sound(struct address_info *hw_config)
-{
- ad1848_unload(hw_config->io_base,
- hw_config->irq,
- devc->dma,
- devc->dma,
- 0);
- sound_unload_audiodev(hw_config->slots[0]);
-}
-
-static struct address_info cfg;
-static struct address_info cfg_mpu;
-
-static int __initdata spea = -1;
-static int mss = 0;
-static int __initdata dma = -1;
-static int __initdata irq = -1;
-static int __initdata io = -1;
-static int __initdata mpu_irq = -1;
-static int __initdata mpu_io = -1;
-
-module_param(dma, int, 0);
-module_param(irq, int, 0);
-module_param(io, int, 0);
-module_param(spea, int, 0); /* spea=0/1 set the old_hardware */
-module_param(mpu_irq, int, 0);
-module_param(mpu_io, int, 0);
-module_param(mss, int, 0);
-
-static int __init init_sscape(void)
-{
- printk(KERN_INFO "Soundscape driver Copyright (C) by Hannu Savolainen 1993-1996\n");
-
- cfg.irq = irq;
- cfg.dma = dma;
- cfg.io_base = io;
-
- cfg_mpu.irq = mpu_irq;
- cfg_mpu.io_base = mpu_io;
- /* WEH - Try to get right dma channel */
- cfg_mpu.dma = dma;
-
- devc->codec = cfg.io_base;
- devc->codec_irq = cfg.irq;
- devc->codec_type = 0;
- devc->ic_type = 0;
- devc->raw_buf = NULL;
- spin_lock_init(&devc->lock);
-
- if (cfg.dma == -1 || cfg.irq == -1 || cfg.io_base == -1) {
- printk(KERN_ERR "DMA, IRQ, and IO port must be specified.\n");
- return -EINVAL;
- }
-
- if (cfg_mpu.irq == -1 && cfg_mpu.io_base != -1) {
- printk(KERN_ERR "MPU_IRQ must be specified if MPU_IO is set.\n");
- return -EINVAL;
- }
-
- if(spea != -1) {
- old_hardware = spea;
- printk(KERN_INFO "Forcing %s hardware support.\n",
- spea?"new":"old");
- }
- if (probe_sscape(&cfg_mpu) == 0)
- return -ENODEV;
-
- attach_sscape(&cfg_mpu);
-
- mss = init_ss_ms_sound(&cfg);
-
- return 0;
-}
-
-static void __exit cleanup_sscape(void)
-{
- if (mss)
- unload_ss_ms_sound(&cfg);
- unload_sscape(&cfg_mpu);
-}
-
-module_init(init_sscape);
-module_exit(cleanup_sscape);
-
-#ifndef MODULE
-static int __init setup_sscape(char *str)
-{
- /* io, irq, dma, mpu_io, mpu_irq */
- int ints[6];
-
- str = get_options(str, ARRAY_SIZE(ints), ints);
-
- io = ints[1];
- irq = ints[2];
- dma = ints[3];
- mpu_io = ints[4];
- mpu_irq = ints[5];
-
- return 1;
-}
-
-__setup("sscape=", setup_sscape);
-#endif
-MODULE_LICENSE("GPL");
diff --git a/sound/pci/ca0106/ca0106_proc.c b/sound/pci/ca0106/ca0106_proc.c
index c62b7d1..15523e6 100644
--- a/sound/pci/ca0106/ca0106_proc.c
+++ b/sound/pci/ca0106/ca0106_proc.c
@@ -304,7 +304,7 @@
while (!snd_info_get_line(buffer, line, sizeof(line))) {
if (sscanf(line, "%x %x", ®, &val) != 2)
continue;
- if ((reg < 0x40) && (reg >=0) && (val <= 0xffffffff) ) {
+ if (reg < 0x40 && val <= 0xffffffff) {
spin_lock_irqsave(&emu->emu_lock, flags);
outl(val, emu->port + (reg & 0xfffffffc));
spin_unlock_irqrestore(&emu->emu_lock, flags);
@@ -405,7 +405,7 @@
while (!snd_info_get_line(buffer, line, sizeof(line))) {
if (sscanf(line, "%x %x %x", ®, &channel_id, &val) != 3)
continue;
- if ((reg < 0x80) && (reg >=0) && (val <= 0xffffffff) && (channel_id >=0) && (channel_id <= 3) )
+ if (reg < 0x80 && val <= 0xffffffff && channel_id <= 3)
snd_ca0106_ptr_write(emu, reg, channel_id, val);
}
}
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index 7545464..cb65bd0 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -240,7 +240,7 @@
} else if (pitch == 0x02000000) {
/* pitch == 2 */
return 3;
- } else if (pitch >= 0x0 && pitch <= 0x08000000) {
+ } else if (pitch <= 0x08000000) {
/* 0 <= pitch <= 8 */
return 0;
} else {
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 36e08bd..6b8ae7b 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -1040,8 +1040,7 @@
if (sscanf(line, "%x %x %x", ®, &channel_id, &val) != 3)
continue;
- if ((reg < 0x49) && (reg >= 0) && (val <= 0xffffffff)
- && (channel_id >= 0) && (channel_id <= 2) )
+ if (reg < 0x49 && val <= 0xffffffff && channel_id <= 2)
snd_emu10k1x_ptr_write(emu, reg, channel_id, val);
}
}
diff --git a/sound/pci/emu10k1/emuproc.c b/sound/pci/emu10k1/emuproc.c
index 216f974..baa7cd5 100644
--- a/sound/pci/emu10k1/emuproc.c
+++ b/sound/pci/emu10k1/emuproc.c
@@ -451,7 +451,7 @@
while (!snd_info_get_line(buffer, line, sizeof(line))) {
if (sscanf(line, "%x %x", ®, &val) != 2)
continue;
- if ((reg < 0x40) && (reg >= 0) && (val <= 0xffffffff) ) {
+ if (reg < 0x40 && val <= 0xffffffff) {
spin_lock_irqsave(&emu->emu_lock, flags);
outl(val, emu->port + (reg & 0xfffffffc));
spin_unlock_irqrestore(&emu->emu_lock, flags);
@@ -527,7 +527,7 @@
while (!snd_info_get_line(buffer, line, sizeof(line))) {
if (sscanf(line, "%x %x %x", ®, &channel_id, &val) != 3)
continue;
- if ((reg < 0xa0) && (reg >= 0) && (val <= 0xffffffff) && (channel_id >= 0) && (channel_id <= 3) )
+ if (reg < 0xa0 && val <= 0xffffffff && channel_id <= 3)
snd_ptr_write(emu, iobase, reg, channel_id, val);
}
}
diff --git a/sound/pci/emu10k1/io.c b/sound/pci/emu10k1/io.c
index c1a5aa1..5ef7080 100644
--- a/sound/pci/emu10k1/io.c
+++ b/sound/pci/emu10k1/io.c
@@ -256,7 +256,7 @@
if (reg > 0x3f)
return 1;
reg += 0x40; /* 0x40 upwards are registers. */
- if (value < 0 || value > 0x3f) /* 0 to 0x3f are values */
+ if (value > 0x3f) /* 0 to 0x3f are values */
return 1;
spin_lock_irqsave(&emu->emu_lock, flags);
outl(reg, emu->port + A_IOCFG);
diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c
index 0b8dcb5..35606ae 100644
--- a/sound/soc/codecs/tlv320aic23.c
+++ b/sound/soc/codecs/tlv320aic23.c
@@ -85,7 +85,7 @@
* of data into val
*/
- if ((reg < 0 || reg > 9) && (reg != 15)) {
+ if (reg > 9 && reg != 15) {
printk(KERN_WARNING "%s Invalid register R%u\n", __func__, reg);
return -1;
}
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index 99f3376..00cd54c 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -66,6 +66,28 @@
iface, &quirk);
}
+static int us144_create_usbmidi(struct snd_card *card)
+{
+ static struct snd_usb_midi_endpoint_info quirk_data = {
+ .out_ep = 4,
+ .in_ep = 3,
+ .out_cables = 0x001,
+ .in_cables = 0x001
+ };
+ static struct snd_usb_audio_quirk quirk = {
+ .vendor_name = "US144",
+ .product_name = NAME_ALLCAPS,
+ .ifnum = 0,
+ .type = QUIRK_MIDI_US122L,
+ .data = &quirk_data
+ };
+ struct usb_device *dev = US122L(card)->chip.dev;
+ struct usb_interface *iface = usb_ifnum_to_if(dev, 0);
+
+ return snd_usb_create_midi_interface(&US122L(card)->chip,
+ iface, &quirk);
+}
+
/*
* Wrapper for usb_control_msg().
* Allocates a temp buffer to prevent dmaing from/to the stack.
@@ -171,6 +193,11 @@
if (!us122l->first)
us122l->first = file;
+
+ if (us122l->chip.dev->descriptor.idProduct == USB_ID_US144) {
+ iface = usb_ifnum_to_if(us122l->chip.dev, 0);
+ usb_autopm_get_interface(iface);
+ }
iface = usb_ifnum_to_if(us122l->chip.dev, 1);
usb_autopm_get_interface(iface);
return 0;
@@ -179,8 +206,14 @@
static int usb_stream_hwdep_release(struct snd_hwdep *hw, struct file *file)
{
struct us122l *us122l = hw->private_data;
- struct usb_interface *iface = usb_ifnum_to_if(us122l->chip.dev, 1);
+ struct usb_interface *iface;
snd_printdd(KERN_DEBUG "%p %p\n", hw, file);
+
+ if (us122l->chip.dev->descriptor.idProduct == USB_ID_US144) {
+ iface = usb_ifnum_to_if(us122l->chip.dev, 0);
+ usb_autopm_put_interface(iface);
+ }
+ iface = usb_ifnum_to_if(us122l->chip.dev, 1);
usb_autopm_put_interface(iface);
if (us122l->first == file)
us122l->first = NULL;
@@ -443,6 +476,13 @@
int err;
struct us122l *us122l = US122L(card);
+ if (us122l->chip.dev->descriptor.idProduct == USB_ID_US144) {
+ err = usb_set_interface(us122l->chip.dev, 0, 1);
+ if (err) {
+ snd_printk(KERN_ERR "usb_set_interface error \n");
+ return false;
+ }
+ }
err = usb_set_interface(us122l->chip.dev, 1, 1);
if (err) {
snd_printk(KERN_ERR "usb_set_interface error \n");
@@ -455,7 +495,10 @@
if (!us122l_start(us122l, 44100, 256))
return false;
- err = us122l_create_usbmidi(card);
+ if (us122l->chip.dev->descriptor.idProduct == USB_ID_US144)
+ err = us144_create_usbmidi(card);
+ else
+ err = us122l_create_usbmidi(card);
if (err < 0) {
snd_printk(KERN_ERR "us122l_create_usbmidi error %i \n", err);
us122l_stop(us122l);
@@ -542,6 +585,7 @@
return err;
}
+ usb_get_intf(usb_ifnum_to_if(device, 0));
usb_get_dev(device);
*cardp = card;
return 0;
@@ -550,9 +594,16 @@
static int snd_us122l_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+ struct usb_device *device = interface_to_usbdev(intf);
struct snd_card *card;
int err;
+ if (device->descriptor.idProduct == USB_ID_US144
+ && device->speed == USB_SPEED_HIGH) {
+ snd_printk(KERN_ERR "disable ehci-hcd to run US-144 \n");
+ return -ENODEV;
+ }
+
snd_printdd(KERN_DEBUG"%p:%i\n",
intf, intf->cur_altsetting->desc.bInterfaceNumber);
if (intf->cur_altsetting->desc.bInterfaceNumber != 1)
@@ -591,7 +642,8 @@
snd_usbmidi_disconnect(p);
}
- usb_put_intf(intf);
+ usb_put_intf(usb_ifnum_to_if(us122l->chip.dev, 0));
+ usb_put_intf(usb_ifnum_to_if(us122l->chip.dev, 1));
usb_put_dev(us122l->chip.dev);
while (atomic_read(&us122l->mmap_count))
@@ -642,6 +694,13 @@
mutex_lock(&us122l->mutex);
/* needed, doesn't restart without: */
+ if (us122l->chip.dev->descriptor.idProduct == USB_ID_US144) {
+ err = usb_set_interface(us122l->chip.dev, 0, 1);
+ if (err) {
+ snd_printk(KERN_ERR "usb_set_interface error \n");
+ goto unlock;
+ }
+ }
err = usb_set_interface(us122l->chip.dev, 1, 1);
if (err) {
snd_printk(KERN_ERR "usb_set_interface error \n");
@@ -675,11 +734,11 @@
.idVendor = 0x0644,
.idProduct = USB_ID_US122L
},
-/* { */ /* US-144 maybe works when @USB1.1. Untested. */
-/* .match_flags = USB_DEVICE_ID_MATCH_DEVICE, */
-/* .idVendor = 0x0644, */
-/* .idProduct = USB_ID_US144 */
-/* }, */
+ { /* US-144 only works at USB1.1! Disable module ehci-hcd. */
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x0644,
+ .idProduct = USB_ID_US144
+ },
{ /* terminator */ }
};