vxge: add support for ethtool firmware flashing
Add the ability in the vxge driver to flash firmware via ethtool.
Updated to include comments from Ben Hutchings.
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Ram Vepa <ram.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index c822463..7761b9e 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -155,7 +155,6 @@
static enum vxge_hw_status
__vxge_hw_vpath_sw_reset(struct __vxge_hw_device *devh, u32 vp_id);
-
static enum vxge_hw_status
__vxge_hw_vpath_mac_configure(struct __vxge_hw_device *devh, u32 vp_id);
@@ -322,6 +321,188 @@
return status;
}
+enum vxge_hw_status
+vxge_hw_upgrade_read_version(struct __vxge_hw_device *hldev, u32 *major,
+ u32 *minor, u32 *build)
+{
+ u64 data0 = 0, data1 = 0, steer_ctrl = 0;
+ struct __vxge_hw_virtualpath *vpath;
+ enum vxge_hw_status status;
+
+ vpath = &hldev->virtual_paths[hldev->first_vp_id];
+
+ status = vxge_hw_vpath_fw_api(vpath,
+ VXGE_HW_FW_UPGRADE_ACTION,
+ VXGE_HW_FW_UPGRADE_MEMO,
+ VXGE_HW_FW_UPGRADE_OFFSET_READ,
+ &data0, &data1, &steer_ctrl);
+ if (status != VXGE_HW_OK)
+ return status;
+
+ *major = VXGE_HW_RTS_ACCESS_STEER_DATA0_GET_FW_VER_MAJOR(data0);
+ *minor = VXGE_HW_RTS_ACCESS_STEER_DATA0_GET_FW_VER_MINOR(data0);
+ *build = VXGE_HW_RTS_ACCESS_STEER_DATA0_GET_FW_VER_BUILD(data0);
+
+ return status;
+}
+
+enum vxge_hw_status vxge_hw_flash_fw(struct __vxge_hw_device *hldev)
+{
+ u64 data0 = 0, data1 = 0, steer_ctrl = 0;
+ struct __vxge_hw_virtualpath *vpath;
+ enum vxge_hw_status status;
+ u32 ret;
+
+ vpath = &hldev->virtual_paths[hldev->first_vp_id];
+
+ status = vxge_hw_vpath_fw_api(vpath,
+ VXGE_HW_FW_UPGRADE_ACTION,
+ VXGE_HW_FW_UPGRADE_MEMO,
+ VXGE_HW_FW_UPGRADE_OFFSET_COMMIT,
+ &data0, &data1, &steer_ctrl);
+ if (status != VXGE_HW_OK) {
+ vxge_debug_init(VXGE_ERR, "%s: FW upgrade failed", __func__);
+ goto exit;
+ }
+
+ ret = VXGE_HW_RTS_ACCESS_STEER_CTRL_GET_ACTION(steer_ctrl) & 0x7F;
+ if (ret != 1) {
+ vxge_debug_init(VXGE_ERR, "%s: FW commit failed with error %d",
+ __func__, ret);
+ status = VXGE_HW_FAIL;
+ }
+
+exit:
+ return status;
+}
+
+enum vxge_hw_status
+vxge_update_fw_image(struct __vxge_hw_device *hldev, const u8 *fwdata, int size)
+{
+ u64 data0 = 0, data1 = 0, steer_ctrl = 0;
+ struct __vxge_hw_virtualpath *vpath;
+ enum vxge_hw_status status;
+ int ret_code, sec_code;
+
+ vpath = &hldev->virtual_paths[hldev->first_vp_id];
+
+ /* send upgrade start command */
+ status = vxge_hw_vpath_fw_api(vpath,
+ VXGE_HW_FW_UPGRADE_ACTION,
+ VXGE_HW_FW_UPGRADE_MEMO,
+ VXGE_HW_FW_UPGRADE_OFFSET_START,
+ &data0, &data1, &steer_ctrl);
+ if (status != VXGE_HW_OK) {
+ vxge_debug_init(VXGE_ERR, " %s: Upgrade start cmd failed",
+ __func__);
+ return status;
+ }
+
+ /* Transfer fw image to adapter 16 bytes at a time */
+ for (; size > 0; size -= VXGE_HW_FW_UPGRADE_BLK_SIZE) {
+ steer_ctrl = 0;
+
+ /* The next 128bits of fwdata to be loaded onto the adapter */
+ data0 = *((u64 *)fwdata);
+ data1 = *((u64 *)fwdata + 1);
+
+ status = vxge_hw_vpath_fw_api(vpath,
+ VXGE_HW_FW_UPGRADE_ACTION,
+ VXGE_HW_FW_UPGRADE_MEMO,
+ VXGE_HW_FW_UPGRADE_OFFSET_SEND,
+ &data0, &data1, &steer_ctrl);
+ if (status != VXGE_HW_OK) {
+ vxge_debug_init(VXGE_ERR, "%s: Upgrade send failed",
+ __func__);
+ goto out;
+ }
+
+ ret_code = VXGE_HW_UPGRADE_GET_RET_ERR_CODE(data0);
+ switch (ret_code) {
+ case VXGE_HW_FW_UPGRADE_OK:
+ /* All OK, send next 16 bytes. */
+ break;
+ case VXGE_FW_UPGRADE_BYTES2SKIP:
+ /* skip bytes in the stream */
+ fwdata += (data0 >> 8) & 0xFFFFFFFF;
+ break;
+ case VXGE_HW_FW_UPGRADE_DONE:
+ goto out;
+ case VXGE_HW_FW_UPGRADE_ERR:
+ sec_code = VXGE_HW_UPGRADE_GET_SEC_ERR_CODE(data0);
+ switch (sec_code) {
+ case VXGE_HW_FW_UPGRADE_ERR_CORRUPT_DATA_1:
+ case VXGE_HW_FW_UPGRADE_ERR_CORRUPT_DATA_7:
+ printk(KERN_ERR
+ "corrupted data from .ncf file\n");
+ break;
+ case VXGE_HW_FW_UPGRADE_ERR_INV_NCF_FILE_3:
+ case VXGE_HW_FW_UPGRADE_ERR_INV_NCF_FILE_4:
+ case VXGE_HW_FW_UPGRADE_ERR_INV_NCF_FILE_5:
+ case VXGE_HW_FW_UPGRADE_ERR_INV_NCF_FILE_6:
+ case VXGE_HW_FW_UPGRADE_ERR_INV_NCF_FILE_8:
+ printk(KERN_ERR "invalid .ncf file\n");
+ break;
+ case VXGE_HW_FW_UPGRADE_ERR_BUFFER_OVERFLOW:
+ printk(KERN_ERR "buffer overflow\n");
+ break;
+ case VXGE_HW_FW_UPGRADE_ERR_FAILED_TO_FLASH:
+ printk(KERN_ERR "failed to flash the image\n");
+ break;
+ case VXGE_HW_FW_UPGRADE_ERR_GENERIC_ERROR_UNKNOWN:
+ printk(KERN_ERR
+ "generic error. Unknown error type\n");
+ break;
+ default:
+ printk(KERN_ERR "Unknown error of type %d\n",
+ sec_code);
+ break;
+ }
+ status = VXGE_HW_FAIL;
+ goto out;
+ default:
+ printk(KERN_ERR "Unknown FW error: %d\n", ret_code);
+ status = VXGE_HW_FAIL;
+ goto out;
+ }
+ /* point to next 16 bytes */
+ fwdata += VXGE_HW_FW_UPGRADE_BLK_SIZE;
+ }
+out:
+ return status;
+}
+
+enum vxge_hw_status
+vxge_hw_vpath_eprom_img_ver_get(struct __vxge_hw_device *hldev,
+ struct eprom_image *img)
+{
+ u64 data0 = 0, data1 = 0, steer_ctrl = 0;
+ struct __vxge_hw_virtualpath *vpath;
+ enum vxge_hw_status status;
+ int i;
+
+ vpath = &hldev->virtual_paths[hldev->first_vp_id];
+
+ for (i = 0; i < VXGE_HW_MAX_ROM_IMAGES; i++) {
+ data0 = VXGE_HW_RTS_ACCESS_STEER_ROM_IMAGE_INDEX(i);
+ data1 = steer_ctrl = 0;
+
+ status = vxge_hw_vpath_fw_api(vpath,
+ VXGE_HW_RTS_ACCESS_STEER_CTRL_DATA_STRUCT_SEL_FW_MEMO,
+ VXGE_HW_FW_API_GET_EPROM_REV,
+ 0, &data0, &data1, &steer_ctrl);
+ if (status != VXGE_HW_OK)
+ break;
+
+ img[i].is_valid = VXGE_HW_GET_EPROM_IMAGE_VALID(data0);
+ img[i].index = VXGE_HW_GET_EPROM_IMAGE_INDEX(data0);
+ img[i].type = VXGE_HW_GET_EPROM_IMAGE_TYPE(data0);
+ img[i].version = VXGE_HW_GET_EPROM_IMAGE_REV(data0);
+ }
+
+ return status;
+}
+
/*
* __vxge_hw_channel_allocate - Allocate memory for channel
* This function allocates required memory for the channel and various arrays