drm/i915/sdvo: Fix GMBUSification
Besides a couple of bugs when writing more than a single byte along the
GMBUS, SDVO was completely failing whilst trying to use GMBUS, so use
bit banging instead.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 710d59e..0bb2553 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -132,10 +132,12 @@
};
struct sdvo_device_mapping {
+ u8 initialized;
u8 dvo_port;
u8 slave_addr;
u8 dvo_wiring;
- u8 initialized;
+ u8 i2c_pin;
+ u8 i2c_speed;
u8 ddc_pin;
};
@@ -248,8 +250,8 @@
struct intel_gmbus {
struct i2c_adapter adapter;
- struct i2c_adapter *force_bitbanging;
- int pin;
+ struct i2c_adapter *force_bit;
+ u32 reg0;
} *gmbus;
struct pci_dev *bridge_dev;
@@ -1104,6 +1106,8 @@
/* intel_i2c.c */
extern int intel_setup_gmbus(struct drm_device *dev);
extern void intel_teardown_gmbus(struct drm_device *dev);
+extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed);
+extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit);
extern void intel_i2c_reset(struct drm_device *dev);
/* intel_opregion.c */
diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
index 42a7a5b..7e868d2 100644
--- a/drivers/gpu/drm/i915/intel_bios.c
+++ b/drivers/gpu/drm/i915/intel_bios.c
@@ -369,7 +369,16 @@
p_mapping->slave_addr = p_child->slave_addr;
p_mapping->dvo_wiring = p_child->dvo_wiring;
p_mapping->ddc_pin = p_child->ddc_pin;
+ p_mapping->i2c_pin = p_child->i2c_pin;
+ p_mapping->i2c_speed = p_child->i2c_speed;
p_mapping->initialized = 1;
+ DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d, i2c_speed=%d\n",
+ p_mapping->dvo_port,
+ p_mapping->slave_addr,
+ p_mapping->dvo_wiring,
+ p_mapping->ddc_pin,
+ p_mapping->i2c_pin,
+ p_mapping->i2c_speed);
} else {
DRM_DEBUG_KMS("Maybe one SDVO port is shared by "
"two SDVO device.\n");
diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h
index 4c18514..e1a598f 100644
--- a/drivers/gpu/drm/i915/intel_bios.h
+++ b/drivers/gpu/drm/i915/intel_bios.h
@@ -197,7 +197,8 @@
struct child_device_config {
u16 handle;
u16 device_type;
- u8 device_id[10]; /* See DEVICE_TYPE_* above */
+ u8 i2c_speed;
+ u8 rsvd[9];
u16 addin_offset;
u8 dvo_port; /* See Device_PORT_* above */
u8 i2c_pin;
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 6f4d1289..9192024 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -38,6 +38,12 @@
#define I2C_RISEFALL_TIME 20
+static inline struct intel_gmbus *
+to_intel_gmbus(struct i2c_adapter *i2c)
+{
+ return container_of(i2c, struct intel_gmbus, adapter);
+}
+
struct intel_gpio {
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
@@ -71,10 +77,27 @@
I915_WRITE(DSPCLK_GATE_D, val);
}
+static u32 get_reserved(struct intel_gpio *gpio)
+{
+ struct drm_i915_private *dev_priv = gpio->dev_priv;
+ struct drm_device *dev = dev_priv->dev;
+ u32 reserved = 0;
+
+ /* On most chips, these bits must be preserved in software. */
+ if (!IS_I830(dev) && !IS_845G(dev))
+ reserved = I915_READ(gpio->reg) & (GPIO_DATA_PULLUP_DISABLE |
+ GPIO_CLOCK_PULLUP_DISABLE);
+
+ return reserved;
+}
+
static int get_clock(void *data)
{
struct intel_gpio *gpio = data;
struct drm_i915_private *dev_priv = gpio->dev_priv;
+ u32 reserved = get_reserved(gpio);
+ I915_WRITE(gpio->reg, reserved | GPIO_CLOCK_DIR_MASK);
+ I915_WRITE(gpio->reg, reserved);
return (I915_READ(gpio->reg) & GPIO_CLOCK_VAL_IN) != 0;
}
@@ -82,6 +105,9 @@
{
struct intel_gpio *gpio = data;
struct drm_i915_private *dev_priv = gpio->dev_priv;
+ u32 reserved = get_reserved(gpio);
+ I915_WRITE(gpio->reg, reserved | GPIO_DATA_DIR_MASK);
+ I915_WRITE(gpio->reg, reserved);
return (I915_READ(gpio->reg) & GPIO_DATA_VAL_IN) != 0;
}
@@ -89,13 +115,8 @@
{
struct intel_gpio *gpio = data;
struct drm_i915_private *dev_priv = gpio->dev_priv;
- struct drm_device *dev = dev_priv->dev;
- u32 reserved = 0, clock_bits;
-
- /* On most chips, these bits must be preserved in software. */
- if (!IS_I830(dev) && !IS_845G(dev))
- reserved = I915_READ(gpio->reg) & (GPIO_DATA_PULLUP_DISABLE |
- GPIO_CLOCK_PULLUP_DISABLE);
+ u32 reserved = get_reserved(gpio);
+ u32 clock_bits;
if (state_high)
clock_bits = GPIO_CLOCK_DIR_IN | GPIO_CLOCK_DIR_MASK;
@@ -111,13 +132,8 @@
{
struct intel_gpio *gpio = data;
struct drm_i915_private *dev_priv = gpio->dev_priv;
- struct drm_device *dev = dev_priv->dev;
- u32 reserved = 0, data_bits;
-
- /* On most chips, these bits must be preserved in software. */
- if (!IS_I830(dev) && !IS_845G(dev))
- reserved = I915_READ(gpio->reg) & (GPIO_DATA_PULLUP_DISABLE |
- GPIO_CLOCK_PULLUP_DISABLE);
+ u32 reserved = get_reserved(gpio);
+ u32 data_bits;
if (state_high)
data_bits = GPIO_DATA_DIR_IN | GPIO_DATA_DIR_MASK;
@@ -155,7 +171,7 @@
gpio->reg += PCH_GPIOA - GPIOA;
gpio->dev_priv = dev_priv;
- snprintf(gpio->adapter.name, I2C_NAME_SIZE, "GPIO %d", pin);
+ snprintf(gpio->adapter.name, I2C_NAME_SIZE, "GPIO%c", "?BACDEF?"[pin]);
gpio->adapter.owner = THIS_MODULE;
gpio->adapter.algo_data = &gpio->algo;
gpio->adapter.dev.parent = &dev_priv->dev->pdev->dev;
@@ -170,16 +186,6 @@
if (i2c_bit_add_bus(&gpio->adapter))
goto out_free;
- intel_i2c_reset(dev_priv->dev);
-
- /* JJJ: raise SCL and SDA? */
- intel_i2c_quirk_set(dev_priv, true);
- set_data(gpio, 1);
- udelay(I2C_RISEFALL_TIME);
- set_clock(gpio, 1);
- udelay(I2C_RISEFALL_TIME);
- intel_i2c_quirk_set(dev_priv, false);
-
return &gpio->adapter;
out_free:
@@ -188,17 +194,27 @@
}
static int
-quirk_i2c_transfer(struct drm_i915_private *dev_priv,
- struct i2c_adapter *adapter,
- struct i2c_msg *msgs,
- int num)
+intel_i2c_quirk_xfer(struct drm_i915_private *dev_priv,
+ struct i2c_adapter *adapter,
+ struct i2c_msg *msgs,
+ int num)
{
+ struct intel_gpio *gpio = container_of(adapter,
+ struct intel_gpio,
+ adapter);
int ret;
intel_i2c_reset(dev_priv->dev);
intel_i2c_quirk_set(dev_priv, true);
- ret = i2c_transfer(adapter, msgs, num);
+ set_data(gpio, 1);
+ set_clock(gpio, 1);
+ udelay(I2C_RISEFALL_TIME);
+
+ ret = adapter->algo->master_xfer(adapter, msgs, num);
+
+ set_data(gpio, 1);
+ set_clock(gpio, 1);
intel_i2c_quirk_set(dev_priv, false);
return ret;
@@ -213,21 +229,15 @@
struct intel_gmbus,
adapter);
struct drm_i915_private *dev_priv = adapter->algo_data;
- int i, speed, reg_offset;
+ int i, reg_offset;
- if (bus->force_bitbanging)
- return quirk_i2c_transfer(dev_priv, bus->force_bitbanging, msgs, num);
+ if (bus->force_bit)
+ return intel_i2c_quirk_xfer(dev_priv,
+ bus->force_bit, msgs, num);
reg_offset = HAS_PCH_SPLIT(dev_priv->dev) ? PCH_GMBUS0 - GMBUS0 : 0;
- speed = GMBUS_RATE_100KHZ;
- if (INTEL_INFO(dev_priv->dev)->gen > 4 || IS_G4X(dev_priv->dev)) {
- if (bus->pin == GMBUS_PORT_DPB) /* SDVO only? */
- speed = GMBUS_RATE_1MHZ;
- else
- speed = GMBUS_RATE_400KHZ;
- }
- I915_WRITE(GMBUS0 + reg_offset, speed | bus->pin);
+ I915_WRITE(GMBUS0 + reg_offset, bus->reg0);
for (i = 0; i < num; i++) {
u16 len = msgs[i].len;
@@ -239,6 +249,7 @@
(len << GMBUS_BYTE_COUNT_SHIFT) |
(msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
+ POSTING_READ(GMBUS2+reg_offset);
do {
u32 val, loop = 0;
@@ -254,20 +265,35 @@
} while (--len && ++loop < 4);
} while (len);
} else {
- u32 val = 0, loop = 0;
+ u32 val, loop;
- BUG_ON(msgs[i].len > 4);
-
+ val = loop = 0;
do {
- val |= *buf++ << (loop*8);
- } while (--len && +loop < 4);
+ val |= *buf++ << (8 * loop);
+ } while (--len && ++loop < 4);
I915_WRITE(GMBUS3 + reg_offset, val);
I915_WRITE(GMBUS1 + reg_offset,
- (i + 1 == num ? GMBUS_CYCLE_STOP : GMBUS_CYCLE_WAIT ) |
+ (i + 1 == num ? GMBUS_CYCLE_STOP : GMBUS_CYCLE_WAIT) |
(msgs[i].len << GMBUS_BYTE_COUNT_SHIFT) |
(msgs[i].addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
+ POSTING_READ(GMBUS2+reg_offset);
+
+ while (len) {
+ if (wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_RDY), 50))
+ goto timeout;
+ if (I915_READ(GMBUS2 + reg_offset) & GMBUS_SATOER)
+ return 0;
+
+ val = loop = 0;
+ do {
+ val |= *buf++ << (8 * loop);
+ } while (--len && ++loop < 4);
+
+ I915_WRITE(GMBUS3 + reg_offset, val);
+ POSTING_READ(GMBUS2+reg_offset);
+ }
}
if (i + 1 < num && wait_for(I915_READ(GMBUS2 + reg_offset) & (GMBUS_SATOER | GMBUS_HW_WAIT_PHASE), 50))
@@ -279,17 +305,25 @@
return num;
timeout:
- DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d\n", bus->pin);
+ DRM_INFO("GMBUS timed out, falling back to bit banging on pin %d [%s]\n",
+ bus->reg0 & 0xff, bus->adapter.name);
/* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
- bus->force_bitbanging = intel_gpio_create(dev_priv, bus->pin);
- if (!bus->force_bitbanging)
+ bus->force_bit = intel_gpio_create(dev_priv, bus->reg0 & 0xff);
+ if (!bus->force_bit)
return -ENOMEM;
- return quirk_i2c_transfer(dev_priv, bus->force_bitbanging, msgs, num);
+ return intel_i2c_quirk_xfer(dev_priv, bus->force_bit, msgs, num);
}
static u32 gmbus_func(struct i2c_adapter *adapter)
{
+ struct intel_gmbus *bus = container_of(adapter,
+ struct intel_gmbus,
+ adapter);
+
+ if (bus->force_bit)
+ bus->force_bit->algo->functionality(bus->force_bit);
+
return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
/* I2C_FUNC_10BIT_ADDR | */
I2C_FUNC_SMBUS_READ_BLOCK_DATA |
@@ -307,15 +341,15 @@
*/
int intel_setup_gmbus(struct drm_device *dev)
{
- static const char *names[] = {
+ static const char *names[GMBUS_NUM_PORTS] = {
"disabled",
"ssc",
"vga",
"panel",
"dpc",
"dpb",
- "dpd",
"reserved"
+ "dpd",
};
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i;
@@ -343,7 +377,8 @@
if (ret)
goto err;
- bus->pin = i;
+ /* By default use a conservative clock rate */
+ bus->reg0 = i | GMBUS_RATE_100KHZ;
}
intel_i2c_reset(dev_priv->dev);
@@ -360,6 +395,38 @@
return ret;
}
+void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
+{
+ struct intel_gmbus *bus = to_intel_gmbus(adapter);
+
+ /* speed:
+ * 0x0 = 100 KHz
+ * 0x1 = 50 KHz
+ * 0x2 = 400 KHz
+ * 0x3 = 1000 Khz
+ */
+ bus->reg0 = (bus->reg0 & ~(0x3 << 8)) | (speed << 8);
+}
+
+void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit)
+{
+ struct intel_gmbus *bus = to_intel_gmbus(adapter);
+
+ if (force_bit) {
+ if (bus->force_bit == NULL) {
+ struct drm_i915_private *dev_priv = adapter->algo_data;
+ bus->force_bit = intel_gpio_create(dev_priv,
+ bus->reg0 & 0xff);
+ }
+ } else {
+ if (bus->force_bit) {
+ i2c_del_adapter(bus->force_bit);
+ kfree(bus->force_bit);
+ bus->force_bit = NULL;
+ }
+ }
+}
+
void intel_teardown_gmbus(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -370,9 +437,9 @@
for (i = 0; i < GMBUS_NUM_PORTS; i++) {
struct intel_gmbus *bus = &dev_priv->gmbus[i];
- if (bus->force_bitbanging) {
- i2c_del_adapter(bus->force_bitbanging);
- kfree(bus->force_bitbanging);
+ if (bus->force_bit) {
+ i2c_del_adapter(bus->force_bit);
+ kfree(bus->force_bit);
}
i2c_del_adapter(&bus->adapter);
}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 7cd2d95..b684a40 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -68,6 +68,8 @@
struct i2c_adapter *i2c;
u8 slave_addr;
+ struct i2c_adapter ddc;
+
/* Register for the SDVO device: SDVOB or SDVOC */
int sdvo_reg;
@@ -247,49 +249,29 @@
static bool intel_sdvo_read_byte(struct intel_sdvo *intel_sdvo, u8 addr, u8 *ch)
{
- u8 out_buf[2] = { addr, 0 };
- u8 buf[2];
struct i2c_msg msgs[] = {
{
- .addr = intel_sdvo->slave_addr >> 1,
+ .addr = intel_sdvo->slave_addr,
.flags = 0,
.len = 1,
- .buf = out_buf,
+ .buf = &addr,
},
{
- .addr = intel_sdvo->slave_addr >> 1,
+ .addr = intel_sdvo->slave_addr,
.flags = I2C_M_RD,
.len = 1,
- .buf = buf,
+ .buf = ch,
}
};
int ret;
if ((ret = i2c_transfer(intel_sdvo->i2c, msgs, 2)) == 2)
- {
- *ch = buf[0];
return true;
- }
DRM_DEBUG_KMS("i2c transfer returned %d\n", ret);
return false;
}
-static bool intel_sdvo_write_byte(struct intel_sdvo *intel_sdvo, int addr, u8 ch)
-{
- u8 out_buf[2] = { addr, ch };
- struct i2c_msg msgs[] = {
- {
- .addr = intel_sdvo->slave_addr >> 1,
- .flags = 0,
- .len = 2,
- .buf = out_buf,
- }
- };
-
- return i2c_transfer(intel_sdvo->i2c, msgs, 1) == 1;
-}
-
#define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}
/** Mapping of command numbers to names, for debug output */
static const struct _sdvo_cmd_name {
@@ -434,22 +416,6 @@
DRM_LOG_KMS("\n");
}
-static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd,
- const void *args, int args_len)
-{
- int i;
-
- intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len);
-
- for (i = 0; i < args_len; i++) {
- if (!intel_sdvo_write_byte(intel_sdvo, SDVO_I2C_ARG_0 - i,
- ((u8*)args)[i]))
- return false;
- }
-
- return intel_sdvo_write_byte(intel_sdvo, SDVO_I2C_OPCODE, cmd);
-}
-
static const char *cmd_status_names[] = {
"Power on",
"Success",
@@ -460,6 +426,70 @@
"Scaling not supported"
};
+static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd,
+ const void *args, int args_len)
+{
+ u8 buf[args_len*2 + 2], status;
+ struct i2c_msg msgs[args_len + 3];
+ int i, ret;
+
+ intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len);
+
+ for (i = 0; i < args_len; i++) {
+ msgs[i].addr = intel_sdvo->slave_addr;
+ msgs[i].flags = 0;
+ msgs[i].len = 2;
+ msgs[i].buf = buf + 2 *i;
+ buf[2*i + 0] = SDVO_I2C_ARG_0 - i;
+ buf[2*i + 1] = ((u8*)args)[i];
+ }
+ msgs[i].addr = intel_sdvo->slave_addr;
+ msgs[i].flags = 0;
+ msgs[i].len = 2;
+ msgs[i].buf = buf + 2*i;
+ buf[2*i + 0] = SDVO_I2C_OPCODE;
+ buf[2*i + 1] = cmd;
+
+ /* the following two are to read the response */
+ status = SDVO_I2C_CMD_STATUS;
+ msgs[i+1].addr = intel_sdvo->slave_addr;
+ msgs[i+1].flags = 0;
+ msgs[i+1].len = 1;
+ msgs[i+1].buf = &status;
+
+ msgs[i+2].addr = intel_sdvo->slave_addr;
+ msgs[i+2].flags = I2C_M_RD;
+ msgs[i+2].len = 1;
+ msgs[i+2].buf = &status;
+
+ ret = i2c_transfer(intel_sdvo->i2c, msgs, i+3);
+ if (ret < 0) {
+ DRM_DEBUG_KMS("I2c transfer returned %d\n", ret);
+ return false;
+ }
+ if (ret != i+3) {
+ /* failure in I2C transfer */
+ DRM_DEBUG_KMS("I2c transfer returned %d/%d\n", ret, i+3);
+ return false;
+ }
+
+ i = 3;
+ while (status == SDVO_CMD_STATUS_PENDING && i--) {
+ if (!intel_sdvo_read_byte(intel_sdvo,
+ SDVO_I2C_CMD_STATUS,
+ &status))
+ return false;
+ }
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("command returns response %s [%d]\n",
+ status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP ? cmd_status_names[status] : "???",
+ status);
+ return false;
+ }
+
+ return true;
+}
+
static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo,
void *response, int response_len)
{
@@ -497,13 +527,9 @@
SDVO_I2C_RETURN_0 + i,
&((u8 *)response)[i]))
goto log_fail;
- DRM_LOG_KMS("%02X ", ((u8 *)response)[i]);
+ DRM_LOG_KMS(" %02X", ((u8 *)response)[i]);
}
-
- for (; i < 8; i++)
- DRM_LOG_KMS(" ");
DRM_LOG_KMS("\n");
-
return true;
log_fail:
@@ -521,75 +547,17 @@
return 4;
}
-/**
- * Try to read the response after issuie the DDC switch command. But it
- * is noted that we must do the action of reading response and issuing DDC
- * switch command in one I2C transaction. Otherwise when we try to start
- * another I2C transaction after issuing the DDC bus switch, it will be
- * switched to the internal SDVO register.
- */
-static int intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo,
- u8 target)
+static bool intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo,
+ u8 ddc_bus)
{
- u8 out_buf[2], cmd_buf[2], ret_value[2], ret;
- struct i2c_msg msgs[] = {
- {
- .addr = intel_sdvo->slave_addr >> 1,
- .flags = 0,
- .len = 2,
- .buf = out_buf,
- },
- /* the following two are to read the response */
- {
- .addr = intel_sdvo->slave_addr >> 1,
- .flags = 0,
- .len = 1,
- .buf = cmd_buf,
- },
- {
- .addr = intel_sdvo->slave_addr >> 1,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = ret_value,
- },
- };
-
- intel_sdvo_debug_write(intel_sdvo, SDVO_CMD_SET_CONTROL_BUS_SWITCH,
- &target, 1);
- /* write the DDC switch command argument */
- if (!intel_sdvo_write_byte(intel_sdvo, SDVO_I2C_ARG_0, target))
- return -EIO;
-
- out_buf[0] = SDVO_I2C_OPCODE;
- out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH;
- cmd_buf[0] = SDVO_I2C_CMD_STATUS;
- cmd_buf[1] = 0;
- ret_value[0] = 0;
- ret_value[1] = 0;
-
- ret = i2c_transfer(intel_sdvo->i2c, msgs, 3);
- if (ret < 0)
- return ret;
- if (ret != 3) {
- /* failure in I2C transfer */
- DRM_DEBUG_KMS("I2c transfer returned %d\n", ret);
- return -EIO;
- }
- if (ret_value[0] != SDVO_CMD_STATUS_SUCCESS) {
- DRM_DEBUG_KMS("DDC switch command returns response %d\n",
- ret_value[0]);
- return -EIO;
- }
-
- return 0;
+ return intel_sdvo_write_cmd(intel_sdvo,
+ SDVO_CMD_SET_CONTROL_BUS_SWITCH,
+ &ddc_bus, 1);
}
static bool intel_sdvo_set_value(struct intel_sdvo *intel_sdvo, u8 cmd, const void *data, int len)
{
- if (!intel_sdvo_write_cmd(intel_sdvo, cmd, data, len))
- return false;
-
- return intel_sdvo_read_response(intel_sdvo, NULL, 0);
+ return intel_sdvo_write_cmd(intel_sdvo, cmd, data, len);
}
static bool
@@ -1272,7 +1240,38 @@
static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct intel_sdvo_caps *caps)
{
- return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_DEVICE_CAPS, caps, sizeof(*caps));
+ if (!intel_sdvo_get_value(intel_sdvo,
+ SDVO_CMD_GET_DEVICE_CAPS,
+ caps, sizeof(*caps)))
+ return false;
+
+ DRM_DEBUG_KMS("SDVO capabilities:\n"
+ " vendor_id: %d\n"
+ " device_id: %d\n"
+ " device_rev_id: %d\n"
+ " sdvo_version_major: %d\n"
+ " sdvo_version_minor: %d\n"
+ " sdvo_inputs_mask: %d\n"
+ " smooth_scaling: %d\n"
+ " sharp_scaling: %d\n"
+ " up_scaling: %d\n"
+ " down_scaling: %d\n"
+ " stall_support: %d\n"
+ " output_flags: %d\n",
+ caps->vendor_id,
+ caps->device_id,
+ caps->device_rev_id,
+ caps->sdvo_version_major,
+ caps->sdvo_version_minor,
+ caps->sdvo_inputs_mask,
+ caps->smooth_scaling,
+ caps->sharp_scaling,
+ caps->up_scaling,
+ caps->down_scaling,
+ caps->stall_support,
+ caps->output_flags);
+
+ return true;
}
/* No use! */
@@ -1377,16 +1376,10 @@
}
static struct edid *
-intel_sdvo_get_edid(struct drm_connector *connector, int ddc)
+intel_sdvo_get_edid(struct drm_connector *connector)
{
- struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
- int ret;
-
- ret = intel_sdvo_set_control_bus_switch(intel_sdvo, ddc);
- if (ret)
- return NULL;
-
- return drm_get_edid(connector, intel_sdvo->i2c);
+ struct intel_sdvo *sdvo = intel_attached_sdvo(connector);
+ return drm_get_edid(connector, &sdvo->ddc);
}
static struct drm_connector *
@@ -1447,26 +1440,27 @@
enum drm_connector_status status;
struct edid *edid;
- edid = intel_sdvo_get_edid(connector, intel_sdvo->ddc_bus);
+ edid = intel_sdvo_get_edid(connector);
if (edid == NULL && intel_sdvo_multifunc_encoder(intel_sdvo)) {
- u8 ddc;
+ u8 ddc, saved_ddc = intel_sdvo->ddc_bus;
/*
* Don't use the 1 as the argument of DDC bus switch to get
* the EDID. It is used for SDVO SPD ROM.
*/
for (ddc = intel_sdvo->ddc_bus >> 1; ddc > 1; ddc >>= 1) {
- edid = intel_sdvo_get_edid(connector, ddc);
- if (edid) {
- /*
- * If we found the EDID on the other bus,
- * assume that is the correct DDC bus.
- */
- intel_sdvo->ddc_bus = ddc;
+ intel_sdvo->ddc_bus = ddc;
+ edid = intel_sdvo_get_edid(connector);
+ if (edid)
break;
- }
}
+ /*
+ * If we found the EDID on the other bus,
+ * assume that is the correct DDC bus.
+ */
+ if (edid == NULL)
+ intel_sdvo->ddc_bus = saved_ddc;
}
/*
@@ -1499,7 +1493,7 @@
enum drm_connector_status ret;
if (!intel_sdvo_write_cmd(intel_sdvo,
- SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0))
+ SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0))
return connector_status_unknown;
if (intel_sdvo->is_tv) {
/* add 30ms delay when the output type is SDVO-TV */
@@ -1508,7 +1502,9 @@
if (!intel_sdvo_read_response(intel_sdvo, &response, 2))
return connector_status_unknown;
- DRM_DEBUG_KMS("SDVO response %d %d\n", response & 0xff, response >> 8);
+ DRM_DEBUG_KMS("SDVO response %d %d [%x]\n",
+ response & 0xff, response >> 8,
+ intel_sdvo_connector->output_flag);
if (response == 0)
return connector_status_disconnected;
@@ -1541,11 +1537,10 @@
static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
{
- struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector);
struct edid *edid;
/* set the bus switch and get the modes */
- edid = intel_sdvo_get_edid(connector, intel_sdvo->ddc_bus);
+ edid = intel_sdvo_get_edid(connector);
/*
* Mac mini hack. On this device, the DVI-I connector shares one DDC
@@ -1647,7 +1642,8 @@
return;
BUILD_BUG_ON(sizeof(tv_res) != 3);
- if (!intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT,
+ if (!intel_sdvo_write_cmd(intel_sdvo,
+ SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT,
&tv_res, sizeof(tv_res)))
return;
if (!intel_sdvo_read_response(intel_sdvo, &reply, 3))
@@ -1924,6 +1920,7 @@
drm_mode_destroy(encoder->dev,
intel_sdvo->sdvo_lvds_fixed_mode);
+ i2c_del_adapter(&intel_sdvo->ddc);
intel_encoder_destroy(encoder);
}
@@ -1991,6 +1988,30 @@
intel_sdvo_guess_ddc_bus(sdvo);
}
+static void
+intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv,
+ struct intel_sdvo *sdvo, u32 reg)
+{
+ struct sdvo_device_mapping *mapping;
+ u8 pin, speed;
+
+ if (IS_SDVOB(reg))
+ mapping = &dev_priv->sdvo_mappings[0];
+ else
+ mapping = &dev_priv->sdvo_mappings[1];
+
+ pin = GMBUS_PORT_DPB;
+ speed = GMBUS_RATE_1MHZ >> 8;
+ if (mapping->initialized) {
+ pin = mapping->i2c_pin;
+ speed = mapping->i2c_speed;
+ }
+
+ sdvo->i2c = &dev_priv->gmbus[pin].adapter;
+ intel_gmbus_set_speed(sdvo->i2c, speed);
+ intel_gmbus_force_bit(sdvo->i2c, true);
+}
+
static bool
intel_sdvo_get_digital_encoding_mode(struct intel_sdvo *intel_sdvo, int device)
{
@@ -2504,7 +2525,43 @@
return intel_sdvo_create_enhance_property_lvds(intel_sdvo, intel_sdvo_connector, enhancements.reply);
else
return true;
+}
+static int intel_sdvo_ddc_proxy_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs,
+ int num)
+{
+ struct intel_sdvo *sdvo = adapter->algo_data;
+
+ if (!intel_sdvo_set_control_bus_switch(sdvo, sdvo->ddc_bus))
+ return -EIO;
+
+ return sdvo->i2c->algo->master_xfer(sdvo->i2c, msgs, num);
+}
+
+static u32 intel_sdvo_ddc_proxy_func(struct i2c_adapter *adapter)
+{
+ struct intel_sdvo *sdvo = adapter->algo_data;
+ return sdvo->i2c->algo->functionality(sdvo->i2c);
+}
+
+static const struct i2c_algorithm intel_sdvo_ddc_proxy = {
+ .master_xfer = intel_sdvo_ddc_proxy_xfer,
+ .functionality = intel_sdvo_ddc_proxy_func
+};
+
+static bool
+intel_sdvo_init_ddc_proxy(struct intel_sdvo *sdvo,
+ struct drm_device *dev)
+{
+ sdvo->ddc.owner = THIS_MODULE;
+ sdvo->ddc.class = I2C_CLASS_DDC;
+ snprintf(sdvo->ddc.name, I2C_NAME_SIZE, "SDVO DDC proxy");
+ sdvo->ddc.dev.parent = &dev->pdev->dev;
+ sdvo->ddc.algo_data = sdvo;
+ sdvo->ddc.algo = &intel_sdvo_ddc_proxy;
+
+ return i2c_add_adapter(&sdvo->ddc) == 0;
}
bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
@@ -2518,6 +2575,11 @@
if (!intel_sdvo)
return false;
+ if (!intel_sdvo_init_ddc_proxy(intel_sdvo, dev)) {
+ kfree(intel_sdvo);
+ return false;
+ }
+
intel_sdvo->sdvo_reg = sdvo_reg;
intel_encoder = &intel_sdvo->base;
@@ -2525,9 +2587,8 @@
/* encoder type will be decided later */
drm_encoder_init(dev, &intel_encoder->base, &intel_sdvo_enc_funcs, 0);
- intel_sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter;
-
- intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, sdvo_reg);
+ intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, sdvo_reg) >> 1;
+ intel_sdvo_select_i2c_bus(dev_priv, intel_sdvo, sdvo_reg);
/* Read the regs to test if we can talk to the device */
for (i = 0; i < 0x40; i++) {
@@ -2589,6 +2650,7 @@
err:
drm_encoder_cleanup(&intel_encoder->base);
+ i2c_del_adapter(&intel_sdvo->ddc);
kfree(intel_sdvo);
return false;