V4L/DVB (13375): cx23885: Add support for Mygica X8558Pro DMB-TH
Adds support for cx23885 card Mygica X8558 Pro DMB-TH
Signed-off-by: David T. L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index d9d71c8..23302dd 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -269,6 +269,11 @@
.name = "Hauppauge WinTV-HVR1290",
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_MYGICA_X8558PRO] = {
+ .name = "Mygica X8558 PRO DMB-TH",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -408,6 +413,10 @@
.subvendor = 0x0070,
.subdevice = 0x8551,
.card = CX23885_BOARD_HAUPPAUGE_HVR1290,
+ }, {
+ .subvendor = 0x14f1,
+ .subdevice = 0x8578,
+ .card = CX23885_BOARD_MYGICA_X8558PRO,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -830,6 +839,15 @@
cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2);
mdelay(100);
break;
+ case CX23885_BOARD_MYGICA_X8558PRO:
+ /* GPIO-0 reset first ATBM8830 */
+ /* GPIO-1 reset second ATBM8830 */
+ cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
+ cx23885_gpio_clear(dev, GPIO_0 | GPIO_1);
+ mdelay(100);
+ cx23885_gpio_set(dev, GPIO_0 | GPIO_1);
+ mdelay(100);
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
/* GPIO-0 656_CLK */
@@ -1005,6 +1023,14 @@
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_MYGICA_X8558PRO:
+ ts1->gen_ctrl_val = 0x5; /* Parallel */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 133e802..bf24e86 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -38,6 +38,7 @@
#include "tda18271.h"
#include "lgdt330x.h"
#include "xc5000.h"
+#include "max2165.h"
#include "tda10048.h"
#include "tuner-xc2028.h"
#include "tuner-simple.h"
@@ -54,6 +55,7 @@
#include "netup-eeprom.h"
#include "netup-init.h"
#include "lgdt3305.h"
+#include "atbm8830.h"
static unsigned int debug;
@@ -543,6 +545,38 @@
.if_khz = 6500,
};
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
+ .prod = ATBM8830_PROD_8830,
+ .demod_address = 0x44,
+ .serial_ts = 0,
+ .ts_sampling_edge = 1,
+ .ts_clk_gated = 0,
+ .osc_clk_freq = 30400, /* in kHz */
+ .if_freq = 0, /* zero IF */
+ .zif_swap_iq = 1,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
+ .i2c_address = 0x60,
+ .osc_clk = 20
+};
+
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
+ .prod = ATBM8830_PROD_8830,
+ .demod_address = 0x44,
+ .serial_ts = 1,
+ .ts_sampling_edge = 1,
+ .ts_clk_gated = 0,
+ .osc_clk_freq = 30400, /* in kHz */
+ .if_freq = 0, /* zero IF */
+ .zif_swap_iq = 1,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
+ .i2c_address = 0x60,
+ .osc_clk = 20
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
@@ -908,6 +942,36 @@
0x60, &dev->i2c_bus[0].i2c_adap,
&hauppauge_tda18271_config);
break;
+ case CX23885_BOARD_MYGICA_X8558PRO:
+ switch (port->nr) {
+ /* port B */
+ case 1:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+ &mygica_x8558pro_atbm8830_cfg1,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(max2165_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &mygic_x8558pro_max2165_cfg1);
+ }
+ break;
+ /* port C */
+ case 2:
+ i2c_bus = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+ &mygica_x8558pro_atbm8830_cfg2,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(max2165_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &mygic_x8558pro_max2165_cfg2);
+ }
+ break;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 12d1a34..3383200 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -80,6 +80,7 @@
#define CX23885_BOARD_HAUPPAUGE_HVR1850 24
#define CX23885_BOARD_COMPRO_VIDEOMATE_E800 25
#define CX23885_BOARD_HAUPPAUGE_HVR1290 26
+#define CX23885_BOARD_MYGICA_X8558PRO 27
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002