| /* |
| * proc/fs/generic.c --- generic routines for the proc-fs |
| * |
| * This file contains generic proc-fs routines for handling |
| * directories and files. |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds. |
| * Copyright (C) 1997 Theodore Ts'o |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/time.h> |
| #include <linux/proc_fs.h> |
| #include <linux/stat.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/mount.h> |
| #include <linux/init.h> |
| #include <linux/idr.h> |
| #include <linux/namei.h> |
| #include <linux/bitops.h> |
| #include <linux/spinlock.h> |
| #include <linux/completion.h> |
| #include <asm/uaccess.h> |
| |
| #include "internal.h" |
| |
| DEFINE_SPINLOCK(proc_subdir_lock); |
| |
| static int proc_match(unsigned int len, const char *name, struct proc_dir_entry *de) |
| { |
| if (de->namelen != len) |
| return 0; |
| return !memcmp(name, de->name, len); |
| } |
| |
| /* buffer size is one page but our output routines use some slack for overruns */ |
| #define PROC_BLOCK_SIZE (PAGE_SIZE - 1024) |
| |
| static ssize_t |
| __proc_file_read(struct file *file, char __user *buf, size_t nbytes, |
| loff_t *ppos) |
| { |
| struct inode * inode = file->f_path.dentry->d_inode; |
| char *page; |
| ssize_t retval=0; |
| int eof=0; |
| ssize_t n, count; |
| char *start; |
| struct proc_dir_entry * dp; |
| unsigned long long pos; |
| |
| /* |
| * Gaah, please just use "seq_file" instead. The legacy /proc |
| * interfaces cut loff_t down to off_t for reads, and ignore |
| * the offset entirely for writes.. |
| */ |
| pos = *ppos; |
| if (pos > MAX_NON_LFS) |
| return 0; |
| if (nbytes > MAX_NON_LFS - pos) |
| nbytes = MAX_NON_LFS - pos; |
| |
| dp = PDE(inode); |
| if (!(page = (char*) __get_free_page(GFP_TEMPORARY))) |
| return -ENOMEM; |
| |
| while ((nbytes > 0) && !eof) { |
| count = min_t(size_t, PROC_BLOCK_SIZE, nbytes); |
| |
| start = NULL; |
| if (dp->read_proc) { |
| /* |
| * How to be a proc read function |
| * ------------------------------ |
| * Prototype: |
| * int f(char *buffer, char **start, off_t offset, |
| * int count, int *peof, void *dat) |
| * |
| * Assume that the buffer is "count" bytes in size. |
| * |
| * If you know you have supplied all the data you |
| * have, set *peof. |
| * |
| * You have three ways to return data: |
| * 0) Leave *start = NULL. (This is the default.) |
| * Put the data of the requested offset at that |
| * offset within the buffer. Return the number (n) |
| * of bytes there are from the beginning of the |
| * buffer up to the last byte of data. If the |
| * number of supplied bytes (= n - offset) is |
| * greater than zero and you didn't signal eof |
| * and the reader is prepared to take more data |
| * you will be called again with the requested |
| * offset advanced by the number of bytes |
| * absorbed. This interface is useful for files |
| * no larger than the buffer. |
| * 1) Set *start = an unsigned long value less than |
| * the buffer address but greater than zero. |
| * Put the data of the requested offset at the |
| * beginning of the buffer. Return the number of |
| * bytes of data placed there. If this number is |
| * greater than zero and you didn't signal eof |
| * and the reader is prepared to take more data |
| * you will be called again with the requested |
| * offset advanced by *start. This interface is |
| * useful when you have a large file consisting |
| * of a series of blocks which you want to count |
| * and return as wholes. |
| * (Hack by Paul.Russell@rustcorp.com.au) |
| * 2) Set *start = an address within the buffer. |
| * Put the data of the requested offset at *start. |
| * Return the number of bytes of data placed there. |
| * If this number is greater than zero and you |
| * didn't signal eof and the reader is prepared to |
| * take more data you will be called again with the |
| * requested offset advanced by the number of bytes |
| * absorbed. |
| */ |
| n = dp->read_proc(page, &start, *ppos, |
| count, &eof, dp->data); |
| } else |
| break; |
| |
| if (n == 0) /* end of file */ |
| break; |
| if (n < 0) { /* error */ |
| if (retval == 0) |
| retval = n; |
| break; |
| } |
| |
| if (start == NULL) { |
| if (n > PAGE_SIZE) { |
| printk(KERN_ERR |
| "proc_file_read: Apparent buffer overflow!\n"); |
| n = PAGE_SIZE; |
| } |
| n -= *ppos; |
| if (n <= 0) |
| break; |
| if (n > count) |
| n = count; |
| start = page + *ppos; |
| } else if (start < page) { |
| if (n > PAGE_SIZE) { |
| printk(KERN_ERR |
| "proc_file_read: Apparent buffer overflow!\n"); |
| n = PAGE_SIZE; |
| } |
| if (n > count) { |
| /* |
| * Don't reduce n because doing so might |
| * cut off part of a data block. |
| */ |
| printk(KERN_WARNING |
| "proc_file_read: Read count exceeded\n"); |
| } |
| } else /* start >= page */ { |
| unsigned long startoff = (unsigned long)(start - page); |
| if (n > (PAGE_SIZE - startoff)) { |
| printk(KERN_ERR |
| "proc_file_read: Apparent buffer overflow!\n"); |
| n = PAGE_SIZE - startoff; |
| } |
| if (n > count) |
| n = count; |
| } |
| |
| n -= copy_to_user(buf, start < page ? page : start, n); |
| if (n == 0) { |
| if (retval == 0) |
| retval = -EFAULT; |
| break; |
| } |
| |
| *ppos += start < page ? (unsigned long)start : n; |
| nbytes -= n; |
| buf += n; |
| retval += n; |
| } |
| free_page((unsigned long) page); |
| return retval; |
| } |
| |
| static ssize_t |
| proc_file_read(struct file *file, char __user *buf, size_t nbytes, |
| loff_t *ppos) |
| { |
| struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode); |
| ssize_t rv = -EIO; |
| |
| spin_lock(&pde->pde_unload_lock); |
| if (!pde->proc_fops) { |
| spin_unlock(&pde->pde_unload_lock); |
| return rv; |
| } |
| pde->pde_users++; |
| spin_unlock(&pde->pde_unload_lock); |
| |
| rv = __proc_file_read(file, buf, nbytes, ppos); |
| |
| pde_users_dec(pde); |
| return rv; |
| } |
| |
| static ssize_t |
| proc_file_write(struct file *file, const char __user *buffer, |
| size_t count, loff_t *ppos) |
| { |
| struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode); |
| ssize_t rv = -EIO; |
| |
| if (pde->write_proc) { |
| spin_lock(&pde->pde_unload_lock); |
| if (!pde->proc_fops) { |
| spin_unlock(&pde->pde_unload_lock); |
| return rv; |
| } |
| pde->pde_users++; |
| spin_unlock(&pde->pde_unload_lock); |
| |
| /* FIXME: does this routine need ppos? probably... */ |
| rv = pde->write_proc(file, buffer, count, pde->data); |
| pde_users_dec(pde); |
| } |
| return rv; |
| } |
| |
| |
| static loff_t |
| proc_file_lseek(struct file *file, loff_t offset, int orig) |
| { |
| loff_t retval = -EINVAL; |
| switch (orig) { |
| case 1: |
| offset += file->f_pos; |
| /* fallthrough */ |
| case 0: |
| if (offset < 0 || offset > MAX_NON_LFS) |
| break; |
| file->f_pos = retval = offset; |
| } |
| return retval; |
| } |
| |
| static const struct file_operations proc_file_operations = { |
| .llseek = proc_file_lseek, |
| .read = proc_file_read, |
| .write = proc_file_write, |
| }; |
| |
| static int proc_notify_change(struct dentry *dentry, struct iattr *iattr) |
| { |
| struct inode *inode = dentry->d_inode; |
| struct proc_dir_entry *de = PDE(inode); |
| int error; |
| |
| error = inode_change_ok(inode, iattr); |
| if (error) |
| return error; |
| |
| if ((iattr->ia_valid & ATTR_SIZE) && |
| iattr->ia_size != i_size_read(inode)) { |
| error = vmtruncate(inode, iattr->ia_size); |
| if (error) |
| return error; |
| } |
| |
| setattr_copy(inode, iattr); |
| mark_inode_dirty(inode); |
| |
| de->uid = inode->i_uid; |
| de->gid = inode->i_gid; |
| de->mode = inode->i_mode; |
| return 0; |
| } |
| |
| static int proc_getattr(struct vfsmount *mnt, struct dentry *dentry, |
| struct kstat *stat) |
| { |
| struct inode *inode = dentry->d_inode; |
| struct proc_dir_entry *de = PROC_I(inode)->pde; |
| if (de && de->nlink) |
| inode->i_nlink = de->nlink; |
| |
| generic_fillattr(inode, stat); |
| return 0; |
| } |
| |
| static const struct inode_operations proc_file_inode_operations = { |
| .setattr = proc_notify_change, |
| }; |
| |
| /* |
| * This function parses a name such as "tty/driver/serial", and |
| * returns the struct proc_dir_entry for "/proc/tty/driver", and |
| * returns "serial" in residual. |
| */ |
| static int __xlate_proc_name(const char *name, struct proc_dir_entry **ret, |
| const char **residual) |
| { |
| const char *cp = name, *next; |
| struct proc_dir_entry *de; |
| unsigned int len; |
| |
| de = *ret; |
| if (!de) |
| de = &proc_root; |
| |
| while (1) { |
| next = strchr(cp, '/'); |
| if (!next) |
| break; |
| |
| len = next - cp; |
| for (de = de->subdir; de ; de = de->next) { |
| if (proc_match(len, cp, de)) |
| break; |
| } |
| if (!de) { |
| WARN(1, "name '%s'\n", name); |
| return -ENOENT; |
| } |
| cp += len + 1; |
| } |
| *residual = cp; |
| *ret = de; |
| return 0; |
| } |
| |
| static int xlate_proc_name(const char *name, struct proc_dir_entry **ret, |
| const char **residual) |
| { |
| int rv; |
| |
| spin_lock(&proc_subdir_lock); |
| rv = __xlate_proc_name(name, ret, residual); |
| spin_unlock(&proc_subdir_lock); |
| return rv; |
| } |
| |
| static DEFINE_IDA(proc_inum_ida); |
| static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */ |
| |
| #define PROC_DYNAMIC_FIRST 0xF0000000U |
| |
| /* |
| * Return an inode number between PROC_DYNAMIC_FIRST and |
| * 0xffffffff, or zero on failure. |
| */ |
| static unsigned int get_inode_number(void) |
| { |
| unsigned int i; |
| int error; |
| |
| retry: |
| if (ida_pre_get(&proc_inum_ida, GFP_KERNEL) == 0) |
| return 0; |
| |
| spin_lock(&proc_inum_lock); |
| error = ida_get_new(&proc_inum_ida, &i); |
| spin_unlock(&proc_inum_lock); |
| if (error == -EAGAIN) |
| goto retry; |
| else if (error) |
| return 0; |
| |
| if (i > UINT_MAX - PROC_DYNAMIC_FIRST) { |
| spin_lock(&proc_inum_lock); |
| ida_remove(&proc_inum_ida, i); |
| spin_unlock(&proc_inum_lock); |
| return 0; |
| } |
| return PROC_DYNAMIC_FIRST + i; |
| } |
| |
| static void release_inode_number(unsigned int inum) |
| { |
| spin_lock(&proc_inum_lock); |
| ida_remove(&proc_inum_ida, inum - PROC_DYNAMIC_FIRST); |
| spin_unlock(&proc_inum_lock); |
| } |
| |
| static void *proc_follow_link(struct dentry *dentry, struct nameidata *nd) |
| { |
| nd_set_link(nd, PDE(dentry->d_inode)->data); |
| return NULL; |
| } |
| |
| static const struct inode_operations proc_link_inode_operations = { |
| .readlink = generic_readlink, |
| .follow_link = proc_follow_link, |
| }; |
| |
| /* |
| * As some entries in /proc are volatile, we want to |
| * get rid of unused dentries. This could be made |
| * smarter: we could keep a "volatile" flag in the |
| * inode to indicate which ones to keep. |
| */ |
| static int proc_delete_dentry(const struct dentry * dentry) |
| { |
| return 1; |
| } |
| |
| static const struct dentry_operations proc_dentry_operations = |
| { |
| .d_delete = proc_delete_dentry, |
| }; |
| |
| /* |
| * Don't create negative dentries here, return -ENOENT by hand |
| * instead. |
| */ |
| struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *dir, |
| struct dentry *dentry) |
| { |
| struct inode *inode = NULL; |
| int error = -ENOENT; |
| |
| spin_lock(&proc_subdir_lock); |
| for (de = de->subdir; de ; de = de->next) { |
| if (de->namelen != dentry->d_name.len) |
| continue; |
| if (!memcmp(dentry->d_name.name, de->name, de->namelen)) { |
| pde_get(de); |
| spin_unlock(&proc_subdir_lock); |
| error = -EINVAL; |
| inode = proc_get_inode(dir->i_sb, de); |
| goto out_unlock; |
| } |
| } |
| spin_unlock(&proc_subdir_lock); |
| out_unlock: |
| |
| if (inode) { |
| d_set_d_op(dentry, &proc_dentry_operations); |
| d_add(dentry, inode); |
| return NULL; |
| } |
| if (de) |
| pde_put(de); |
| return ERR_PTR(error); |
| } |
| |
| struct dentry *proc_lookup(struct inode *dir, struct dentry *dentry, |
| struct nameidata *nd) |
| { |
| return proc_lookup_de(PDE(dir), dir, dentry); |
| } |
| |
| /* |
| * This returns non-zero if at EOF, so that the /proc |
| * root directory can use this and check if it should |
| * continue with the <pid> entries.. |
| * |
| * Note that the VFS-layer doesn't care about the return |
| * value of the readdir() call, as long as it's non-negative |
| * for success.. |
| */ |
| int proc_readdir_de(struct proc_dir_entry *de, struct file *filp, void *dirent, |
| filldir_t filldir) |
| { |
| unsigned int ino; |
| int i; |
| struct inode *inode = filp->f_path.dentry->d_inode; |
| int ret = 0; |
| |
| ino = inode->i_ino; |
| i = filp->f_pos; |
| switch (i) { |
| case 0: |
| if (filldir(dirent, ".", 1, i, ino, DT_DIR) < 0) |
| goto out; |
| i++; |
| filp->f_pos++; |
| /* fall through */ |
| case 1: |
| if (filldir(dirent, "..", 2, i, |
| parent_ino(filp->f_path.dentry), |
| DT_DIR) < 0) |
| goto out; |
| i++; |
| filp->f_pos++; |
| /* fall through */ |
| default: |
| spin_lock(&proc_subdir_lock); |
| de = de->subdir; |
| i -= 2; |
| for (;;) { |
| if (!de) { |
| ret = 1; |
| spin_unlock(&proc_subdir_lock); |
| goto out; |
| } |
| if (!i) |
| break; |
| de = de->next; |
| i--; |
| } |
| |
| do { |
| struct proc_dir_entry *next; |
| |
| /* filldir passes info to user space */ |
| pde_get(de); |
| spin_unlock(&proc_subdir_lock); |
| if (filldir(dirent, de->name, de->namelen, filp->f_pos, |
| de->low_ino, de->mode >> 12) < 0) { |
| pde_put(de); |
| goto out; |
| } |
| spin_lock(&proc_subdir_lock); |
| filp->f_pos++; |
| next = de->next; |
| pde_put(de); |
| de = next; |
| } while (de); |
| spin_unlock(&proc_subdir_lock); |
| } |
| ret = 1; |
| out: |
| return ret; |
| } |
| |
| int proc_readdir(struct file *filp, void *dirent, filldir_t filldir) |
| { |
| struct inode *inode = filp->f_path.dentry->d_inode; |
| |
| return proc_readdir_de(PDE(inode), filp, dirent, filldir); |
| } |
| |
| /* |
| * These are the generic /proc directory operations. They |
| * use the in-memory "struct proc_dir_entry" tree to parse |
| * the /proc directory. |
| */ |
| static const struct file_operations proc_dir_operations = { |
| .llseek = generic_file_llseek, |
| .read = generic_read_dir, |
| .readdir = proc_readdir, |
| }; |
| |
| /* |
| * proc directories can do almost nothing.. |
| */ |
| static const struct inode_operations proc_dir_inode_operations = { |
| .lookup = proc_lookup, |
| .getattr = proc_getattr, |
| .setattr = proc_notify_change, |
| }; |
| |
| static int proc_register(struct proc_dir_entry * dir, struct proc_dir_entry * dp) |
| { |
| unsigned int i; |
| struct proc_dir_entry *tmp; |
| |
| i = get_inode_number(); |
| if (i == 0) |
| return -EAGAIN; |
| dp->low_ino = i; |
| |
| if (S_ISDIR(dp->mode)) { |
| if (dp->proc_iops == NULL) { |
| dp->proc_fops = &proc_dir_operations; |
| dp->proc_iops = &proc_dir_inode_operations; |
| } |
| dir->nlink++; |
| } else if (S_ISLNK(dp->mode)) { |
| if (dp->proc_iops == NULL) |
| dp->proc_iops = &proc_link_inode_operations; |
| } else if (S_ISREG(dp->mode)) { |
| if (dp->proc_fops == NULL) |
| dp->proc_fops = &proc_file_operations; |
| if (dp->proc_iops == NULL) |
| dp->proc_iops = &proc_file_inode_operations; |
| } |
| |
| spin_lock(&proc_subdir_lock); |
| |
| for (tmp = dir->subdir; tmp; tmp = tmp->next) |
| if (strcmp(tmp->name, dp->name) == 0) { |
| WARN(1, KERN_WARNING "proc_dir_entry '%s/%s' already registered\n", |
| dir->name, dp->name); |
| break; |
| } |
| |
| dp->next = dir->subdir; |
| dp->parent = dir; |
| dir->subdir = dp; |
| spin_unlock(&proc_subdir_lock); |
| |
| return 0; |
| } |
| |
| static struct proc_dir_entry *__proc_create(struct proc_dir_entry **parent, |
| const char *name, |
| mode_t mode, |
| nlink_t nlink) |
| { |
| struct proc_dir_entry *ent = NULL; |
| const char *fn = name; |
| unsigned int len; |
| |
| /* make sure name is valid */ |
| if (!name || !strlen(name)) goto out; |
| |
| if (xlate_proc_name(name, parent, &fn) != 0) |
| goto out; |
| |
| /* At this point there must not be any '/' characters beyond *fn */ |
| if (strchr(fn, '/')) |
| goto out; |
| |
| len = strlen(fn); |
| |
| ent = kmalloc(sizeof(struct proc_dir_entry) + len + 1, GFP_KERNEL); |
| if (!ent) goto out; |
| |
| memset(ent, 0, sizeof(struct proc_dir_entry)); |
| memcpy(ent->name, fn, len + 1); |
| ent->namelen = len; |
| ent->mode = mode; |
| ent->nlink = nlink; |
| atomic_set(&ent->count, 1); |
| ent->pde_users = 0; |
| spin_lock_init(&ent->pde_unload_lock); |
| ent->pde_unload_completion = NULL; |
| INIT_LIST_HEAD(&ent->pde_openers); |
| out: |
| return ent; |
| } |
| |
| struct proc_dir_entry *proc_symlink(const char *name, |
| struct proc_dir_entry *parent, const char *dest) |
| { |
| struct proc_dir_entry *ent; |
| |
| ent = __proc_create(&parent, name, |
| (S_IFLNK | S_IRUGO | S_IWUGO | S_IXUGO),1); |
| |
| if (ent) { |
| ent->data = kmalloc((ent->size=strlen(dest))+1, GFP_KERNEL); |
| if (ent->data) { |
| strcpy((char*)ent->data,dest); |
| if (proc_register(parent, ent) < 0) { |
| kfree(ent->data); |
| kfree(ent); |
| ent = NULL; |
| } |
| } else { |
| kfree(ent); |
| ent = NULL; |
| } |
| } |
| return ent; |
| } |
| EXPORT_SYMBOL(proc_symlink); |
| |
| struct proc_dir_entry *proc_mkdir_mode(const char *name, mode_t mode, |
| struct proc_dir_entry *parent) |
| { |
| struct proc_dir_entry *ent; |
| |
| ent = __proc_create(&parent, name, S_IFDIR | mode, 2); |
| if (ent) { |
| if (proc_register(parent, ent) < 0) { |
| kfree(ent); |
| ent = NULL; |
| } |
| } |
| return ent; |
| } |
| EXPORT_SYMBOL(proc_mkdir_mode); |
| |
| struct proc_dir_entry *proc_net_mkdir(struct net *net, const char *name, |
| struct proc_dir_entry *parent) |
| { |
| struct proc_dir_entry *ent; |
| |
| ent = __proc_create(&parent, name, S_IFDIR | S_IRUGO | S_IXUGO, 2); |
| if (ent) { |
| ent->data = net; |
| if (proc_register(parent, ent) < 0) { |
| kfree(ent); |
| ent = NULL; |
| } |
| } |
| return ent; |
| } |
| EXPORT_SYMBOL_GPL(proc_net_mkdir); |
| |
| struct proc_dir_entry *proc_mkdir(const char *name, |
| struct proc_dir_entry *parent) |
| { |
| return proc_mkdir_mode(name, S_IRUGO | S_IXUGO, parent); |
| } |
| EXPORT_SYMBOL(proc_mkdir); |
| |
| struct proc_dir_entry *create_proc_entry(const char *name, mode_t mode, |
| struct proc_dir_entry *parent) |
| { |
| struct proc_dir_entry *ent; |
| nlink_t nlink; |
| |
| if (S_ISDIR(mode)) { |
| if ((mode & S_IALLUGO) == 0) |
| mode |= S_IRUGO | S_IXUGO; |
| nlink = 2; |
| } else { |
| if ((mode & S_IFMT) == 0) |
| mode |= S_IFREG; |
| if ((mode & S_IALLUGO) == 0) |
| mode |= S_IRUGO; |
| nlink = 1; |
| } |
| |
| ent = __proc_create(&parent, name, mode, nlink); |
| if (ent) { |
| if (proc_register(parent, ent) < 0) { |
| kfree(ent); |
| ent = NULL; |
| } |
| } |
| return ent; |
| } |
| EXPORT_SYMBOL(create_proc_entry); |
| |
| struct proc_dir_entry *proc_create_data(const char *name, mode_t mode, |
| struct proc_dir_entry *parent, |
| const struct file_operations *proc_fops, |
| void *data) |
| { |
| struct proc_dir_entry *pde; |
| nlink_t nlink; |
| |
| if (S_ISDIR(mode)) { |
| if ((mode & S_IALLUGO) == 0) |
| mode |= S_IRUGO | S_IXUGO; |
| nlink = 2; |
| } else { |
| if ((mode & S_IFMT) == 0) |
| mode |= S_IFREG; |
| if ((mode & S_IALLUGO) == 0) |
| mode |= S_IRUGO; |
| nlink = 1; |
| } |
| |
| pde = __proc_create(&parent, name, mode, nlink); |
| if (!pde) |
| goto out; |
| pde->proc_fops = proc_fops; |
| pde->data = data; |
| if (proc_register(parent, pde) < 0) |
| goto out_free; |
| return pde; |
| out_free: |
| kfree(pde); |
| out: |
| return NULL; |
| } |
| EXPORT_SYMBOL(proc_create_data); |
| |
| static void free_proc_entry(struct proc_dir_entry *de) |
| { |
| release_inode_number(de->low_ino); |
| |
| if (S_ISLNK(de->mode)) |
| kfree(de->data); |
| kfree(de); |
| } |
| |
| void pde_put(struct proc_dir_entry *pde) |
| { |
| if (atomic_dec_and_test(&pde->count)) |
| free_proc_entry(pde); |
| } |
| |
| /* |
| * Remove a /proc entry and free it if it's not currently in use. |
| */ |
| void remove_proc_entry(const char *name, struct proc_dir_entry *parent) |
| { |
| struct proc_dir_entry **p; |
| struct proc_dir_entry *de = NULL; |
| const char *fn = name; |
| unsigned int len; |
| |
| spin_lock(&proc_subdir_lock); |
| if (__xlate_proc_name(name, &parent, &fn) != 0) { |
| spin_unlock(&proc_subdir_lock); |
| return; |
| } |
| len = strlen(fn); |
| |
| for (p = &parent->subdir; *p; p=&(*p)->next ) { |
| if (proc_match(len, fn, *p)) { |
| de = *p; |
| *p = de->next; |
| de->next = NULL; |
| break; |
| } |
| } |
| spin_unlock(&proc_subdir_lock); |
| if (!de) { |
| WARN(1, "name '%s'\n", name); |
| return; |
| } |
| |
| spin_lock(&de->pde_unload_lock); |
| /* |
| * Stop accepting new callers into module. If you're |
| * dynamically allocating ->proc_fops, save a pointer somewhere. |
| */ |
| de->proc_fops = NULL; |
| /* Wait until all existing callers into module are done. */ |
| if (de->pde_users > 0) { |
| DECLARE_COMPLETION_ONSTACK(c); |
| |
| if (!de->pde_unload_completion) |
| de->pde_unload_completion = &c; |
| |
| spin_unlock(&de->pde_unload_lock); |
| |
| wait_for_completion(de->pde_unload_completion); |
| |
| spin_lock(&de->pde_unload_lock); |
| } |
| |
| while (!list_empty(&de->pde_openers)) { |
| struct pde_opener *pdeo; |
| |
| pdeo = list_first_entry(&de->pde_openers, struct pde_opener, lh); |
| list_del(&pdeo->lh); |
| spin_unlock(&de->pde_unload_lock); |
| pdeo->release(pdeo->inode, pdeo->file); |
| kfree(pdeo); |
| spin_lock(&de->pde_unload_lock); |
| } |
| spin_unlock(&de->pde_unload_lock); |
| |
| if (S_ISDIR(de->mode)) |
| parent->nlink--; |
| de->nlink = 0; |
| WARN(de->subdir, KERN_WARNING "%s: removing non-empty directory " |
| "'%s/%s', leaking at least '%s'\n", __func__, |
| de->parent->name, de->name, de->subdir->name); |
| pde_put(de); |
| } |
| EXPORT_SYMBOL(remove_proc_entry); |