| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2009-2010 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/vmalloc.h> |
| #include <linux/platform_device.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/sdio_ids.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/host.h> |
| #include <linux/gpio.h> |
| #include <linux/wl12xx.h> |
| #include <linux/pm_runtime.h> |
| |
| #include "wl12xx.h" |
| #include "wl12xx_80211.h" |
| #include "io.h" |
| |
| #ifndef SDIO_VENDOR_ID_TI |
| #define SDIO_VENDOR_ID_TI 0x0097 |
| #endif |
| |
| #ifndef SDIO_DEVICE_ID_TI_WL1271 |
| #define SDIO_DEVICE_ID_TI_WL1271 0x4076 |
| #endif |
| |
| struct wl12xx_sdio_glue { |
| struct device *dev; |
| struct platform_device *core; |
| }; |
| |
| static const struct sdio_device_id wl1271_devices[] __devinitconst = { |
| { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(sdio, wl1271_devices); |
| |
| static void wl1271_sdio_set_block_size(struct device *child, |
| unsigned int blksz) |
| { |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| |
| sdio_claim_host(func); |
| sdio_set_block_size(func, blksz); |
| sdio_release_host(func); |
| } |
| |
| static void wl12xx_sdio_raw_read(struct device *child, int addr, void *buf, |
| size_t len, bool fixed) |
| { |
| int ret; |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| |
| sdio_claim_host(func); |
| |
| if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { |
| ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret); |
| dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n", |
| addr, ((u8 *)buf)[0]); |
| } else { |
| if (fixed) |
| ret = sdio_readsb(func, buf, addr, len); |
| else |
| ret = sdio_memcpy_fromio(func, buf, addr, len); |
| |
| dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n", |
| addr, len); |
| } |
| |
| sdio_release_host(func); |
| |
| if (ret) |
| dev_err(child->parent, "sdio read failed (%d)\n", ret); |
| } |
| |
| static void wl12xx_sdio_raw_write(struct device *child, int addr, void *buf, |
| size_t len, bool fixed) |
| { |
| int ret; |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| |
| sdio_claim_host(func); |
| |
| if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) { |
| sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret); |
| dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n", |
| addr, ((u8 *)buf)[0]); |
| } else { |
| dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n", |
| addr, len); |
| |
| if (fixed) |
| ret = sdio_writesb(func, addr, buf, len); |
| else |
| ret = sdio_memcpy_toio(func, addr, buf, len); |
| } |
| |
| sdio_release_host(func); |
| |
| if (ret) |
| dev_err(child->parent, "sdio write failed (%d)\n", ret); |
| } |
| |
| static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue) |
| { |
| int ret; |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| |
| /* If enabled, tell runtime PM not to power off the card */ |
| if (pm_runtime_enabled(&func->dev)) { |
| ret = pm_runtime_get_sync(&func->dev); |
| if (ret < 0) |
| goto out; |
| } else { |
| /* Runtime PM is disabled: power up the card manually */ |
| ret = mmc_power_restore_host(func->card->host); |
| if (ret < 0) |
| goto out; |
| } |
| |
| sdio_claim_host(func); |
| sdio_enable_func(func); |
| sdio_release_host(func); |
| |
| out: |
| return ret; |
| } |
| |
| static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue) |
| { |
| int ret; |
| struct sdio_func *func = dev_to_sdio_func(glue->dev); |
| |
| sdio_claim_host(func); |
| sdio_disable_func(func); |
| sdio_release_host(func); |
| |
| /* Power off the card manually, even if runtime PM is enabled. */ |
| ret = mmc_power_save_host(func->card->host); |
| if (ret < 0) |
| return ret; |
| |
| /* If enabled, let runtime PM know the card is powered off */ |
| if (pm_runtime_enabled(&func->dev)) |
| ret = pm_runtime_put_sync(&func->dev); |
| |
| return ret; |
| } |
| |
| static int wl12xx_sdio_set_power(struct device *child, bool enable) |
| { |
| struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent); |
| |
| if (enable) |
| return wl12xx_sdio_power_on(glue); |
| else |
| return wl12xx_sdio_power_off(glue); |
| } |
| |
| static struct wl1271_if_operations sdio_ops = { |
| .read = wl12xx_sdio_raw_read, |
| .write = wl12xx_sdio_raw_write, |
| .power = wl12xx_sdio_set_power, |
| .set_block_size = wl1271_sdio_set_block_size, |
| }; |
| |
| static int __devinit wl1271_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| struct wl12xx_platform_data *wlan_data; |
| struct wl12xx_sdio_glue *glue; |
| struct resource res[1]; |
| mmc_pm_flag_t mmcflags; |
| int ret = -ENOMEM; |
| |
| /* We are only able to handle the wlan function */ |
| if (func->num != 0x02) |
| return -ENODEV; |
| |
| glue = kzalloc(sizeof(*glue), GFP_KERNEL); |
| if (!glue) { |
| dev_err(&func->dev, "can't allocate glue\n"); |
| goto out; |
| } |
| |
| glue->dev = &func->dev; |
| |
| /* Grab access to FN0 for ELP reg. */ |
| func->card->quirks |= MMC_QUIRK_LENIENT_FN0; |
| |
| /* Use block mode for transferring over one block size of data */ |
| func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE; |
| |
| wlan_data = wl12xx_get_platform_data(); |
| if (IS_ERR(wlan_data)) { |
| ret = PTR_ERR(wlan_data); |
| dev_err(glue->dev, "missing wlan platform data: %d\n", ret); |
| goto out_free_glue; |
| } |
| |
| /* if sdio can keep power while host is suspended, enable wow */ |
| mmcflags = sdio_get_host_pm_caps(func); |
| dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags); |
| |
| if (mmcflags & MMC_PM_KEEP_POWER) |
| wlan_data->pwr_in_suspend = true; |
| |
| wlan_data->ops = &sdio_ops; |
| |
| sdio_set_drvdata(func, glue); |
| |
| /* Tell PM core that we don't need the card to be powered now */ |
| pm_runtime_put_noidle(&func->dev); |
| |
| glue->core = platform_device_alloc("wl12xx", -1); |
| if (!glue->core) { |
| dev_err(glue->dev, "can't allocate platform_device"); |
| ret = -ENOMEM; |
| goto out_free_glue; |
| } |
| |
| glue->core->dev.parent = &func->dev; |
| |
| memset(res, 0x00, sizeof(res)); |
| |
| res[0].start = wlan_data->irq; |
| res[0].flags = IORESOURCE_IRQ; |
| res[0].name = "irq"; |
| |
| ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res)); |
| if (ret) { |
| dev_err(glue->dev, "can't add resources\n"); |
| goto out_dev_put; |
| } |
| |
| ret = platform_device_add_data(glue->core, wlan_data, |
| sizeof(*wlan_data)); |
| if (ret) { |
| dev_err(glue->dev, "can't add platform data\n"); |
| goto out_dev_put; |
| } |
| |
| ret = platform_device_add(glue->core); |
| if (ret) { |
| dev_err(glue->dev, "can't add platform device\n"); |
| goto out_dev_put; |
| } |
| return 0; |
| |
| out_dev_put: |
| platform_device_put(glue->core); |
| |
| out_free_glue: |
| kfree(glue); |
| |
| out: |
| return ret; |
| } |
| |
| static void __devexit wl1271_remove(struct sdio_func *func) |
| { |
| struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); |
| |
| /* Undo decrement done above in wl1271_probe */ |
| pm_runtime_get_noresume(&func->dev); |
| |
| platform_device_del(glue->core); |
| platform_device_put(glue->core); |
| kfree(glue); |
| } |
| |
| #ifdef CONFIG_PM |
| static int wl1271_suspend(struct device *dev) |
| { |
| /* Tell MMC/SDIO core it's OK to power down the card |
| * (if it isn't already), but not to remove it completely */ |
| struct sdio_func *func = dev_to_sdio_func(dev); |
| struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func); |
| struct wl1271 *wl = platform_get_drvdata(glue->core); |
| mmc_pm_flag_t sdio_flags; |
| int ret = 0; |
| |
| dev_dbg(dev, "wl1271 suspend. wow_enabled: %d\n", |
| wl->wow_enabled); |
| |
| /* check whether sdio should keep power */ |
| if (wl->wow_enabled) { |
| sdio_flags = sdio_get_host_pm_caps(func); |
| |
| if (!(sdio_flags & MMC_PM_KEEP_POWER)) { |
| dev_err(dev, "can't keep power while host " |
| "is suspended\n"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* keep power while host suspended */ |
| ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER); |
| if (ret) { |
| dev_err(dev, "error while trying to keep power\n"); |
| goto out; |
| } |
| } |
| out: |
| return ret; |
| } |
| |
| static int wl1271_resume(struct device *dev) |
| { |
| dev_dbg(dev, "wl1271 resume\n"); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops wl1271_sdio_pm_ops = { |
| .suspend = wl1271_suspend, |
| .resume = wl1271_resume, |
| }; |
| #endif |
| |
| static struct sdio_driver wl1271_sdio_driver = { |
| .name = "wl1271_sdio", |
| .id_table = wl1271_devices, |
| .probe = wl1271_probe, |
| .remove = __devexit_p(wl1271_remove), |
| #ifdef CONFIG_PM |
| .drv = { |
| .pm = &wl1271_sdio_pm_ops, |
| }, |
| #endif |
| }; |
| |
| static int __init wl1271_init(void) |
| { |
| return sdio_register_driver(&wl1271_sdio_driver); |
| } |
| |
| static void __exit wl1271_exit(void) |
| { |
| sdio_unregister_driver(&wl1271_sdio_driver); |
| } |
| |
| module_init(wl1271_init); |
| module_exit(wl1271_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); |
| MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); |
| MODULE_FIRMWARE(WL127X_FW_NAME_SINGLE); |
| MODULE_FIRMWARE(WL127X_FW_NAME_MULTI); |
| MODULE_FIRMWARE(WL127X_PLT_FW_NAME); |
| MODULE_FIRMWARE(WL128X_FW_NAME_SINGLE); |
| MODULE_FIRMWARE(WL128X_FW_NAME_MULTI); |
| MODULE_FIRMWARE(WL128X_PLT_FW_NAME); |