[SCSI] mpt2sas: print level KERN_DEBUG is replaced by KERN_INFO
Converting print level from MPT2SAS_DEBUG_FMT to MPT2SAS_INFO_FMT.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 371f063..55fbd5b 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -188,14 +188,14 @@
if (!desc)
return;
- printk(MPT2SAS_DEBUG_FMT "%s: %s, smid(%d)\n",
+ printk(MPT2SAS_INFO_FMT "%s: %s, smid(%d)\n",
ioc->name, calling_function_name, desc, smid);
if (!mpi_reply)
return;
if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
- printk(MPT2SAS_DEBUG_FMT
+ printk(MPT2SAS_INFO_FMT
"\tiocstatus(0x%04x), loginfo(0x%08x)\n",
ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo));
@@ -206,7 +206,7 @@
Mpi2SCSIIOReply_t *scsi_reply =
(Mpi2SCSIIOReply_t *)mpi_reply;
if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
- printk(MPT2SAS_DEBUG_FMT
+ printk(MPT2SAS_INFO_FMT
"\tscsi_state(0x%02x), scsi_status"
"(0x%02x)\n", ioc->name,
scsi_reply->SCSIState,
@@ -392,7 +392,7 @@
switch (reset_phase) {
case MPT2_IOC_PRE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
if (!(ioc->diag_buffer_status[i] &
@@ -405,7 +405,7 @@
}
break;
case MPT2_IOC_AFTER_RESET:
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
if (ioc->ctl_cmds.status & MPT2_CMD_PENDING) {
ioc->ctl_cmds.status |= MPT2_CMD_RESET;
@@ -414,7 +414,7 @@
}
break;
case MPT2_IOC_DONE_RESET:
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
@@ -531,7 +531,7 @@
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
if (!found) {
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"handle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
desc, le16_to_cpu(tm_request->DevHandle), lun));
tm_reply = ioc->ctl_cmds.reply;
@@ -549,7 +549,7 @@
return 1;
}
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name,
desc, le16_to_cpu(tm_request->DevHandle), lun,
le16_to_cpu(tm_request->TaskMID)));
@@ -756,7 +756,7 @@
Mpi2SCSITaskManagementRequest_t *tm_request =
(Mpi2SCSITaskManagementRequest_t *)mpi_request;
- dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "TASK_MGMT: "
+ dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "TASK_MGMT: "
"handle(0x%04x), task_type(0x%02x)\n", ioc->name,
le16_to_cpu(tm_request->DevHandle), tm_request->TaskType));
@@ -851,7 +851,7 @@
Mpi2SCSITaskManagementReply_t *tm_reply =
(Mpi2SCSITaskManagementReply_t *)mpi_reply;
- printk(MPT2SAS_DEBUG_FMT "TASK_MGMT: "
+ printk(MPT2SAS_INFO_FMT "TASK_MGMT: "
"IOCStatus(0x%04x), IOCLogInfo(0x%08x), "
"TerminationCount(0x%08x)\n", ioc->name,
le16_to_cpu(tm_reply->IOCStatus),
@@ -950,7 +950,7 @@
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
memset(&karg, 0 , sizeof(karg));
@@ -998,7 +998,7 @@
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
karg.event_entries = MPT2SAS_CTL_EVENT_LOG_SIZE;
@@ -1031,7 +1031,7 @@
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
if (ioc->event_log)
@@ -1073,7 +1073,7 @@
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
number_bytes = karg.hdr.max_data_size -
@@ -1118,7 +1118,7 @@
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
__func__));
retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
@@ -1219,7 +1219,7 @@
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
rc = _ctl_btdh_search_sas_device(ioc, &karg);
@@ -1288,7 +1288,7 @@
u16 ioc_status;
u8 issue_reset = 0;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
@@ -1376,7 +1376,7 @@
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(0x%p), "
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(0x%p), "
"dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data,
(unsigned long long)request_data_dma,
le32_to_cpu(mpi_request->BufferLength)));
@@ -1414,10 +1414,10 @@
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
ioc->diag_buffer_status[buffer_type] |=
MPT2_DIAG_BUFFER_IS_REGISTERED;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n",
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
ioc->name, __func__));
} else {
- printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
+ printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
"log_info(0x%08x)\n", ioc->name, __func__,
ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
@@ -1541,7 +1541,7 @@
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
buffer_type = karg.unique_id & 0x000000ff;
@@ -1611,7 +1611,7 @@
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
karg.application_flags = 0;
@@ -1689,7 +1689,7 @@
int rc;
unsigned long timeleft;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
rc = 0;
@@ -1697,7 +1697,7 @@
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"skipping due to FAULT state\n", ioc->name,
__func__));
rc = -EAGAIN;
@@ -1759,10 +1759,10 @@
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
ioc->diag_buffer_status[buffer_type] |=
MPT2_DIAG_BUFFER_IS_RELEASED;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n",
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
ioc->name, __func__));
} else {
- printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
+ printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
"log_info(0x%08x)\n", ioc->name, __func__,
ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
@@ -1800,7 +1800,7 @@
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
buffer_type = karg.unique_id & 0x000000ff;
@@ -1896,7 +1896,7 @@
if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
__func__));
buffer_type = karg.unique_id & 0x000000ff;
@@ -1927,7 +1927,7 @@
}
diag_data = (void *)(request_data + karg.starting_offset);
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(%p), "
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(%p), "
"offset(%d), sz(%d)\n", ioc->name, __func__,
diag_data, karg.starting_offset, karg.bytes_to_read));
@@ -1942,11 +1942,11 @@
if ((karg.flags & MPT2_FLAGS_REREGISTER) == 0)
return 0;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: Reregister "
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: Reregister "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type));
if ((ioc->diag_buffer_status[buffer_type] &
MPT2_DIAG_BUFFER_IS_RELEASED) == 0) {
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
"buffer_type(0x%02x) is still registered\n", ioc->name,
__func__, buffer_type));
return 0;
@@ -2020,10 +2020,10 @@
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
ioc->diag_buffer_status[buffer_type] |=
MPT2_DIAG_BUFFER_IS_REGISTERED;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: success\n",
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: success\n",
ioc->name, __func__));
} else {
- printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
+ printk(MPT2SAS_INFO_FMT "%s: ioc_status(0x%04x) "
"log_info(0x%08x)\n", ioc->name, __func__,
ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
@@ -2140,7 +2140,7 @@
!ioc)
return -ENODEV;
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT
+ dctlprintk(ioc, printk(MPT2SAS_INFO_FMT
"unsupported ioctl opcode(0x%08x)\n", ioc->name, cmd));
break;
}