| Qualcomm MDSS EDP |
| |
| MDSS EDP is a edp driver which supports panels that are compatable with |
| VESA EDP display interface specification. |
| |
| When configuring the optional properties for external backlight, one should also |
| configure the gpio that drives the pwm to it. |
| |
| Required properties |
| - compatible : Must be "qcom,mdss-edp". |
| - reg : Offset and length of the register set for the |
| device. |
| - reg-names : Names to refer to register sets related to this |
| device |
| - vdda-supply : Phandle for vdd regulator device node. |
| - gpio-panel-en : GPIO for supplying power to panel and backlight |
| driver. |
| - status : A string that has to be set to "okay/ok" to enable |
| the driver. By default this property will be set to |
| "disable". Will be set to "ok/okay" status for |
| specific platforms. |
| - qcom,mdss-fb-map: pHandle that specifies the framebuffer to which the |
| interface is mapped. |
| - gpio-panel-hpd : gpio pin use for edp hpd |
| |
| Example: |
| mdss_edp: qcom,mdss_edp@fd923400 { |
| compatible = "qcom,mdss-edp"; |
| reg = <0xfd923400 0x700>, |
| <0xfd8c2000 0x1000>; |
| reg-names = "edp_base", "mmss_cc_base"; |
| vdda-supply = <&pm8941_l12>; |
| gpio-panel-en = <&msmgpio 58 0>; |
| qcom,panel-lpg-channel = <7>; /* LPG Channel 8 */ |
| qcom,panel-pwm-period = <53>; |
| status = "disable"; |
| qcom,mdss-fb-map = <&mdss_fb0>; |
| gpio-panel-hpd = <&msmgpio 102 0>; |
| }; |
| |
| Optional properties |
| - qcom,panel-lpg-channel : LPG channel for backlight. |
| - qcom,panel-pwm-period : PWM period in microseconds. |
| |
| |