ide: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
[bart: fix checkpatch.pl errors in ide-lib.c and ppc/mpc8xx.c while at it]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index e16597d..ec48dec 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -170,10 +170,10 @@
printk(KERN_ERR
"%s(%s) : PCI Bus Error when doing DMA:"
" status-cmd reg is 0x%x\n",
- __FUNCTION__, drive->name, pci_stat_cmd_reg);
+ __func__, drive->name, pci_stat_cmd_reg);
printk(KERN_ERR
"%s(%s) : PCI Error Address is 0x%x%x\n",
- __FUNCTION__, drive->name,
+ __func__, drive->name,
pci_err_addr_high, pci_err_addr_low);
/* Clear the PCI Error indicator */
pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
@@ -232,7 +232,7 @@
printk(KERN_ERR
"%s(%s): IOC4 DMA STOP bit is still 1 :"
"ioc4_dma_reg 0x%x\n",
- __FUNCTION__, drive->name, ioc4_dma);
+ __func__, drive->name, ioc4_dma);
dma_stat = 1;
}
@@ -251,7 +251,7 @@
udelay(1);
}
if (!valid) {
- printk(KERN_ERR "%s(%s) : DMA incomplete\n", __FUNCTION__,
+ printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__,
drive->name);
dma_stat = 1;
}
@@ -264,7 +264,7 @@
printk(KERN_ERR
"%s(%s): WARNING!! byte_count_dev %d "
"!= byte_count_mem %d\n",
- __FUNCTION__, drive->name, bc_dev, bc_mem);
+ __func__, drive->name, bc_dev, bc_mem);
}
}
@@ -343,7 +343,7 @@
printk(KERN_ERR
"%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
"ALREADY in use\n",
- __FUNCTION__, hwif->name, (void *) dma_base,
+ __func__, hwif->name, (void *) dma_base,
(void *) dma_base + num_ports - 1);
return -1;
}
@@ -352,7 +352,7 @@
if (virt_dma_base == NULL) {
printk(KERN_ERR
"%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n",
- __FUNCTION__, hwif->name, dma_base, dma_base + num_ports - 1);
+ __func__, hwif->name, dma_base, dma_base + num_ports - 1);
goto dma_remap_failure;
}
hwif->dma_base = (unsigned long) virt_dma_base;
@@ -378,7 +378,7 @@
hwif->dmatable_cpu, hwif->dmatable_dma);
printk(KERN_INFO
"%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
- __FUNCTION__, hwif->name);
+ __func__, hwif->name);
printk(KERN_INFO
"Changing from DMA to PIO mode for Drive %s\n", hwif->name);
@@ -406,14 +406,14 @@
if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
printk(KERN_WARNING
"%s(%s):Warning!! DMA from previous transfer was still active\n",
- __FUNCTION__, drive->name);
+ __func__, drive->name);
writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP)
printk(KERN_ERR
"%s(%s) : IOC4 Dma STOP bit is still 1\n",
- __FUNCTION__, drive->name);
+ __func__, drive->name);
}
ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
@@ -421,14 +421,14 @@
printk(KERN_WARNING
"%s(%s) : Warning!! - DMA Error during Previous"
" transfer | status 0x%x\n",
- __FUNCTION__, drive->name, ioc4_dma);
+ __func__, drive->name, ioc4_dma);
writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP)
printk(KERN_ERR
"%s(%s) : IOC4 DMA STOP bit is still 1\n",
- __FUNCTION__, drive->name);
+ __func__, drive->name);
}
/* Address of the Scatter Gather List */
@@ -618,7 +618,7 @@
printk(KERN_ERR
"%s : %s -- ERROR, Addresses "
"0x%p to 0x%p ALREADY in use\n",
- __FUNCTION__, hwif->name, (void *) cmd_phys_base,
+ __func__, hwif->name, (void *) cmd_phys_base,
(void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
return -ENOMEM;
}