[ARM] pata_icside: fix the FIXMEs
Alan Cox suggested that the solution to the FIXMEs in pata_icside is
to use a private postreset method to detect the lack of devices on a
port, and in such a case, disable the interrupt for the port.
This patch implements such a method, and removes the hard coded
disable of port 0. Tested as working.
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 321d98b..64a7117 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -330,17 +330,12 @@
{
}
-/*
- * We need to shut down unused ports to prevent spurious interrupts.
- * FIXME: the libata core doesn't call this function for PATA interfaces.
- */
-static void pata_icside_port_disable(struct ata_port *ap)
+static void pata_icside_postreset(struct ata_port *ap, unsigned int *classes)
{
struct pata_icside_state *state = ap->host->private_data;
- ata_port_printk(ap, KERN_ERR, "disabling icside port\n");
-
- ata_port_disable(ap);
+ if (classes[0] != ATA_DEV_NONE || classes[1] != ATA_DEV_NONE)
+ return ata_std_postreset(ap, classes);
state->port[ap->port_no].disabled = 1;
@@ -356,6 +351,12 @@
}
}
+static void pata_icside_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
+ pata_icside_postreset);
+}
+
static u8 pata_icside_irq_ack(struct ata_port *ap, unsigned int chk_drq)
{
unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
@@ -374,7 +375,7 @@
}
static struct ata_port_operations pata_icside_port_ops = {
- .port_disable = pata_icside_port_disable,
+ .port_disable = ata_port_disable,
.set_dmamode = pata_icside_set_dmamode,
@@ -397,7 +398,7 @@
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
+ .error_handler = pata_icside_error_handler,
.post_internal_cmd = pata_icside_bmdma_stop,
.irq_clear = ata_dummy_noret,
@@ -484,13 +485,6 @@
state->port[0].port_sel = sel;
state->port[1].port_sel = sel | 1;
- /*
- * FIXME: work around libata's aversion to calling port_disable.
- * This permanently disables interrupts on port 0 - bad luck if
- * you have a drive on that port.
- */
- state->port[0].disabled = 1;
-
info->base = easi_base;
info->irqops = &pata_icside_ops_arcin_v6;
info->nr_ports = 2;