| #ifndef ____ASM_ARCH_SDRC_H |
| #define ____ASM_ARCH_SDRC_H |
| |
| /* |
| * OMAP2/3 SDRC/SMS register definitions |
| * |
| * Copyright (C) 2007 Texas Instruments, Inc. |
| * Copyright (C) 2007 Nokia Corporation |
| * |
| * Written by Paul Walmsley |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <asm/arch/io.h> |
| |
| /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ |
| |
| #define SDRC_SYSCONFIG 0x010 |
| #define SDRC_DLLA_CTRL 0x060 |
| #define SDRC_DLLA_STATUS 0x064 |
| #define SDRC_DLLB_CTRL 0x068 |
| #define SDRC_DLLB_STATUS 0x06C |
| #define SDRC_POWER 0x070 |
| #define SDRC_MR_0 0x084 |
| #define SDRC_RFR_CTRL_0 0x0a4 |
| |
| /* |
| * These values represent the number of memory clock cycles between |
| * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 |
| * rows per device, and include a subtraction of a 50 cycle window in the |
| * event that the autorefresh command is delayed due to other SDRC activity. |
| * The '| 1' sets the ARE field to send one autorefresh when the autorefresh |
| * counter reaches 0. |
| * |
| * These represent optimal values for common parts, it won't work for all. |
| * As long as you scale down, most parameters are still work, they just |
| * become sub-optimal. The RFR value goes in the opposite direction. If you |
| * don't adjust it down as your clock period increases the refresh interval |
| * will not be met. Setting all parameters for complete worst case may work, |
| * but may cut memory performance by 2x. Due to errata the DLLs need to be |
| * unlocked and their value needs run time calibration. A dynamic call is |
| * need for that as no single right value exists acorss production samples. |
| * |
| * Only the FULL speed values are given. Current code is such that rate |
| * changes must be made at DPLLoutx2. The actual value adjustment for low |
| * frequency operation will be handled by omap_set_performance() |
| * |
| * By having the boot loader boot up in the fastest L4 speed available likely |
| * will result in something which you can switch between. |
| */ |
| #define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) |
| #define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) |
| #define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) |
| #define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ |
| #define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ |
| |
| |
| /* |
| * SMS register access |
| */ |
| |
| |
| #define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) |
| #define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) |
| #define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) |
| |
| /* SMS register offsets - read/write with sms_{read,write}_reg() */ |
| |
| #define SMS_SYSCONFIG 0x010 |
| /* REVISIT: fill in other SMS registers here */ |
| |
| #endif |