| /* |
| * Page fault handler for SH with an MMU. |
| * |
| * Copyright (C) 1999 Niibe Yutaka |
| * Copyright (C) 2003 - 2009 Paul Mundt |
| * |
| * Based on linux/arch/i386/mm/fault.c: |
| * Copyright (C) 1995 Linus Torvalds |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/hardirq.h> |
| #include <linux/kprobes.h> |
| #include <linux/perf_event.h> |
| #include <asm/io_trapped.h> |
| #include <asm/mmu_context.h> |
| #include <asm/tlbflush.h> |
| #include <asm/traps.h> |
| |
| static inline int notify_page_fault(struct pt_regs *regs, int trap) |
| { |
| int ret = 0; |
| |
| if (kprobes_built_in() && !user_mode(regs)) { |
| preempt_disable(); |
| if (kprobe_running() && kprobe_fault_handler(regs, trap)) |
| ret = 1; |
| preempt_enable(); |
| } |
| |
| return ret; |
| } |
| |
| static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address) |
| { |
| unsigned index = pgd_index(address); |
| pgd_t *pgd_k; |
| pud_t *pud, *pud_k; |
| pmd_t *pmd, *pmd_k; |
| |
| pgd += index; |
| pgd_k = init_mm.pgd + index; |
| |
| if (!pgd_present(*pgd_k)) |
| return NULL; |
| |
| pud = pud_offset(pgd, address); |
| pud_k = pud_offset(pgd_k, address); |
| if (!pud_present(*pud_k)) |
| return NULL; |
| |
| if (!pud_present(*pud)) |
| set_pud(pud, *pud_k); |
| |
| pmd = pmd_offset(pud, address); |
| pmd_k = pmd_offset(pud_k, address); |
| if (!pmd_present(*pmd_k)) |
| return NULL; |
| |
| if (!pmd_present(*pmd)) |
| set_pmd(pmd, *pmd_k); |
| else { |
| /* |
| * The page tables are fully synchronised so there must |
| * be another reason for the fault. Return NULL here to |
| * signal that we have not taken care of the fault. |
| */ |
| BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k)); |
| return NULL; |
| } |
| |
| return pmd_k; |
| } |
| |
| /* |
| * Handle a fault on the vmalloc or module mapping area |
| */ |
| static noinline int vmalloc_fault(unsigned long address) |
| { |
| pgd_t *pgd_k; |
| pmd_t *pmd_k; |
| pte_t *pte_k; |
| |
| /* Make sure we are in vmalloc/module/P3 area: */ |
| if (!(address >= P3SEG && address < P3_ADDR_MAX)) |
| return -1; |
| |
| /* |
| * Synchronize this task's top level page-table |
| * with the 'reference' page table. |
| * |
| * Do _not_ use "current" here. We might be inside |
| * an interrupt in the middle of a task switch.. |
| */ |
| pgd_k = get_TTB(); |
| pmd_k = vmalloc_sync_one(pgd_k, address); |
| if (!pmd_k) |
| return -1; |
| |
| pte_k = pte_offset_kernel(pmd_k, address); |
| if (!pte_present(*pte_k)) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int fault_in_kernel_space(unsigned long address) |
| { |
| return address >= TASK_SIZE; |
| } |
| |
| /* |
| * This routine handles page faults. It determines the address, |
| * and the problem, and then passes it off to one of the appropriate |
| * routines. |
| */ |
| asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, |
| unsigned long writeaccess, |
| unsigned long address) |
| { |
| unsigned long vec; |
| struct task_struct *tsk; |
| struct mm_struct *mm; |
| struct vm_area_struct * vma; |
| int si_code; |
| int fault; |
| siginfo_t info; |
| |
| tsk = current; |
| mm = tsk->mm; |
| si_code = SEGV_MAPERR; |
| vec = lookup_exception_vector(); |
| |
| /* |
| * We fault-in kernel-space virtual memory on-demand. The |
| * 'reference' page table is init_mm.pgd. |
| * |
| * NOTE! We MUST NOT take any locks for this case. We may |
| * be in an interrupt or a critical region, and should |
| * only copy the information from the master page table, |
| * nothing more. |
| */ |
| if (unlikely(fault_in_kernel_space(address))) { |
| if (vmalloc_fault(address) >= 0) |
| return; |
| if (notify_page_fault(regs, vec)) |
| return; |
| |
| goto bad_area_nosemaphore; |
| } |
| |
| if (unlikely(notify_page_fault(regs, vec))) |
| return; |
| |
| /* Only enable interrupts if they were on before the fault */ |
| if ((regs->sr & SR_IMASK) != SR_IMASK) |
| local_irq_enable(); |
| |
| perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address); |
| |
| /* |
| * If we're in an interrupt, have no user context or are running |
| * in an atomic region then we must not take the fault: |
| */ |
| if (in_atomic() || !mm) |
| goto no_context; |
| |
| down_read(&mm->mmap_sem); |
| |
| vma = find_vma(mm, address); |
| if (!vma) |
| goto bad_area; |
| if (vma->vm_start <= address) |
| goto good_area; |
| if (!(vma->vm_flags & VM_GROWSDOWN)) |
| goto bad_area; |
| if (expand_stack(vma, address)) |
| goto bad_area; |
| |
| /* |
| * Ok, we have a good vm_area for this memory access, so |
| * we can handle it.. |
| */ |
| good_area: |
| si_code = SEGV_ACCERR; |
| if (writeaccess) { |
| if (!(vma->vm_flags & VM_WRITE)) |
| goto bad_area; |
| } else { |
| if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) |
| goto bad_area; |
| } |
| |
| /* |
| * If for any reason at all we couldn't handle the fault, |
| * make sure we exit gracefully rather than endlessly redo |
| * the fault. |
| */ |
| fault = handle_mm_fault(mm, vma, address, writeaccess ? FAULT_FLAG_WRITE : 0); |
| if (unlikely(fault & VM_FAULT_ERROR)) { |
| if (fault & VM_FAULT_OOM) |
| goto out_of_memory; |
| else if (fault & VM_FAULT_SIGBUS) |
| goto do_sigbus; |
| BUG(); |
| } |
| if (fault & VM_FAULT_MAJOR) { |
| tsk->maj_flt++; |
| perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, |
| regs, address); |
| } else { |
| tsk->min_flt++; |
| perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, |
| regs, address); |
| } |
| |
| up_read(&mm->mmap_sem); |
| return; |
| |
| /* |
| * Something tried to access memory that isn't in our memory map.. |
| * Fix it, but check if it's kernel or user first.. |
| */ |
| bad_area: |
| up_read(&mm->mmap_sem); |
| |
| bad_area_nosemaphore: |
| if (user_mode(regs)) { |
| info.si_signo = SIGSEGV; |
| info.si_errno = 0; |
| info.si_code = si_code; |
| info.si_addr = (void *) address; |
| force_sig_info(SIGSEGV, &info, tsk); |
| return; |
| } |
| |
| no_context: |
| /* Are we prepared to handle this kernel fault? */ |
| if (fixup_exception(regs)) |
| return; |
| |
| if (handle_trapped_io(regs, address)) |
| return; |
| /* |
| * Oops. The kernel tried to access some bad page. We'll have to |
| * terminate things with extreme prejudice. |
| * |
| */ |
| |
| bust_spinlocks(1); |
| |
| if (oops_may_print()) { |
| unsigned long page; |
| |
| if (address < PAGE_SIZE) |
| printk(KERN_ALERT "Unable to handle kernel NULL " |
| "pointer dereference"); |
| else |
| printk(KERN_ALERT "Unable to handle kernel paging " |
| "request"); |
| printk(" at virtual address %08lx\n", address); |
| printk(KERN_ALERT "pc = %08lx\n", regs->pc); |
| page = (unsigned long)get_TTB(); |
| if (page) { |
| page = ((__typeof__(page) *)page)[address >> PGDIR_SHIFT]; |
| printk(KERN_ALERT "*pde = %08lx\n", page); |
| if (page & _PAGE_PRESENT) { |
| page &= PAGE_MASK; |
| address &= 0x003ff000; |
| page = ((__typeof__(page) *) |
| __va(page))[address >> |
| PAGE_SHIFT]; |
| printk(KERN_ALERT "*pte = %08lx\n", page); |
| } |
| } |
| } |
| |
| die("Oops", regs, writeaccess); |
| bust_spinlocks(0); |
| do_exit(SIGKILL); |
| |
| /* |
| * We ran out of memory, or some other thing happened to us that made |
| * us unable to handle the page fault gracefully. |
| */ |
| out_of_memory: |
| up_read(&mm->mmap_sem); |
| if (!user_mode(regs)) |
| goto no_context; |
| pagefault_out_of_memory(); |
| return; |
| |
| do_sigbus: |
| up_read(&mm->mmap_sem); |
| |
| /* |
| * Send a sigbus, regardless of whether we were in kernel |
| * or user mode. |
| */ |
| info.si_signo = SIGBUS; |
| info.si_errno = 0; |
| info.si_code = BUS_ADRERR; |
| info.si_addr = (void *)address; |
| force_sig_info(SIGBUS, &info, tsk); |
| |
| /* Kernel mode? Handle exceptions or die */ |
| if (!user_mode(regs)) |
| goto no_context; |
| } |
| |
| /* |
| * Called with interrupts disabled. |
| */ |
| asmlinkage int __kprobes |
| handle_tlbmiss(struct pt_regs *regs, unsigned long writeaccess, |
| unsigned long address) |
| { |
| pgd_t *pgd; |
| pud_t *pud; |
| pmd_t *pmd; |
| pte_t *pte; |
| pte_t entry; |
| |
| /* |
| * We don't take page faults for P1, P2, and parts of P4, these |
| * are always mapped, whether it be due to legacy behaviour in |
| * 29-bit mode, or due to PMB configuration in 32-bit mode. |
| */ |
| if (address >= P3SEG && address < P3_ADDR_MAX) { |
| pgd = pgd_offset_k(address); |
| } else { |
| if (unlikely(address >= TASK_SIZE || !current->mm)) |
| return 1; |
| |
| pgd = pgd_offset(current->mm, address); |
| } |
| |
| pud = pud_offset(pgd, address); |
| if (pud_none_or_clear_bad(pud)) |
| return 1; |
| pmd = pmd_offset(pud, address); |
| if (pmd_none_or_clear_bad(pmd)) |
| return 1; |
| pte = pte_offset_kernel(pmd, address); |
| entry = *pte; |
| if (unlikely(pte_none(entry) || pte_not_present(entry))) |
| return 1; |
| if (unlikely(writeaccess && !pte_write(entry))) |
| return 1; |
| |
| if (writeaccess) |
| entry = pte_mkdirty(entry); |
| entry = pte_mkyoung(entry); |
| |
| set_pte(pte, entry); |
| |
| #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SMP) |
| /* |
| * SH-4 does not set MMUCR.RC to the corresponding TLB entry in |
| * the case of an initial page write exception, so we need to |
| * flush it in order to avoid potential TLB entry duplication. |
| */ |
| if (writeaccess == 2) |
| local_flush_tlb_one(get_asid(), address & PAGE_MASK); |
| #endif |
| |
| update_mmu_cache(NULL, address, pte); |
| |
| return 0; |
| } |