Use menuconfig objects: MTD
Use menuconfigs instead of menus, so the whole menu can be disabled at once
instead of going through all options.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 49cbf51..4e62afe 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,10 +1,7 @@
# drivers/mtd/nand/Kconfig
# $Id: Kconfig,v 1.35 2005/11/07 11:14:30 gleixner Exp $
-menu "NAND Flash Device Drivers"
- depends on MTD!=n
-
-config MTD_NAND
+menuconfig MTD_NAND
tristate "NAND Device Support"
depends on MTD
select MTD_NAND_IDS
@@ -13,9 +10,10 @@
devices. For further information see
<http://www.linux-mtd.infradead.org/doc/nand.html>.
+if MTD_NAND
+
config MTD_NAND_VERIFY_WRITE
bool "Verify NAND page writes"
- depends on MTD_NAND
help
This adds an extra check when data is written to the flash. The
NAND flash device internally checks only bits transitioning
@@ -25,7 +23,6 @@
config MTD_NAND_ECC_SMC
bool "NAND ECC Smart Media byte order"
- depends on MTD_NAND
default n
help
Software ECC according to the Smart Media Specification.
@@ -42,45 +39,45 @@
config MTD_NAND_AUTCPU12
tristate "SmartMediaCard on autronix autcpu12 board"
- depends on MTD_NAND && ARCH_AUTCPU12
+ depends on ARCH_AUTCPU12
help
This enables the driver for the autronix autcpu12 board to
access the SmartMediaCard.
config MTD_NAND_EDB7312
tristate "Support for Cirrus Logic EBD7312 evaluation board"
- depends on MTD_NAND && ARCH_EDB7312
+ depends on ARCH_EDB7312
help
This enables the driver for the Cirrus Logic EBD7312 evaluation
board to access the onboard NAND Flash.
config MTD_NAND_H1900
tristate "iPAQ H1900 flash"
- depends on MTD_NAND && ARCH_PXA && MTD_PARTITIONS
+ depends on ARCH_PXA && MTD_PARTITIONS
help
This enables the driver for the iPAQ h1900 flash.
config MTD_NAND_SPIA
tristate "NAND Flash device on SPIA board"
- depends on ARCH_P720T && MTD_NAND
+ depends on ARCH_P720T
help
If you had to ask, you don't have one. Say 'N'.
config MTD_NAND_AMS_DELTA
tristate "NAND Flash device on Amstrad E3"
- depends on MACH_AMS_DELTA && MTD_NAND
+ depends on MACH_AMS_DELTA
help
Support for NAND flash on Amstrad E3 (Delta).
config MTD_NAND_TOTO
tristate "NAND Flash device on TOTO board"
- depends on ARCH_OMAP && MTD_NAND && BROKEN
+ depends on ARCH_OMAP && BROKEN
help
Support for NAND flash on Texas Instruments Toto platform.
config MTD_NAND_TS7250
tristate "NAND Flash device on TS-7250 board"
- depends on MACH_TS72XX && MTD_NAND
+ depends on MACH_TS72XX
help
Support for NAND flash on Technologic Systems TS-7250 platform.
@@ -89,14 +86,14 @@
config MTD_NAND_AU1550
tristate "Au1550/1200 NAND support"
- depends on (SOC_AU1200 || SOC_AU1550) && MTD_NAND
+ depends on SOC_AU1200 || SOC_AU1550
help
This enables the driver for the NAND flash controller on the
AMD/Alchemy 1550 SOC.
config MTD_NAND_RTC_FROM4
tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)"
- depends on MTD_NAND && SH_SOLUTION_ENGINE
+ depends on SH_SOLUTION_ENGINE
select REED_SOLOMON
select REED_SOLOMON_DEC8
select BITREVERSE
@@ -106,13 +103,13 @@
config MTD_NAND_PPCHAMELEONEVB
tristate "NAND Flash device on PPChameleonEVB board"
- depends on PPCHAMELEONEVB && MTD_NAND && BROKEN
+ depends on PPCHAMELEONEVB && BROKEN
help
This enables the NAND flash driver on the PPChameleon EVB Board.
config MTD_NAND_S3C2410
tristate "NAND Flash support for S3C2410/S3C2440 SoC"
- depends on ARCH_S3C2410 && MTD_NAND
+ depends on ARCH_S3C2410
help
This enables the NAND flash controller on the S3C2410 and S3C2440
SoCs
@@ -137,7 +134,7 @@
config MTD_NAND_NDFC
tristate "NDFC NanD Flash Controller"
- depends on MTD_NAND && 44x
+ depends on 44x
select MTD_NAND_ECC_SMC
help
NDFC Nand Flash Controllers are integrated in EP44x SoCs
@@ -154,7 +151,7 @@
config MTD_NAND_DISKONCHIP
tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)"
- depends on MTD_NAND && EXPERIMENTAL
+ depends on EXPERIMENTAL
select REED_SOLOMON
select REED_SOLOMON_DEC16
help
@@ -224,11 +221,11 @@
config MTD_NAND_SHARPSL
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
- depends on MTD_NAND && ARCH_PXA
+ depends on ARCH_PXA
config MTD_NAND_BASLER_EXCITE
tristate "Support for NAND Flash on Basler eXcite"
- depends on MTD_NAND && BASLER_EXCITE
+ depends on BASLER_EXCITE
help
This enables the driver for the NAND flash device found on the
Basler eXcite Smart Camera. If built as a module, the driver
@@ -236,14 +233,14 @@
config MTD_NAND_CAFE
tristate "NAND support for OLPC CAFÉ chip"
- depends on MTD_NAND && PCI
+ depends on PCI
help
Use NAND flash attached to the CAFÉ chip designed for the $100
laptop.
config MTD_NAND_CS553X
tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
- depends on MTD_NAND && X86_32 && (X86_PC || X86_GENERICARCH)
+ depends on X86_32 && (X86_PC || X86_GENERICARCH)
help
The CS553x companion chips for the AMD Geode processor
include NAND flash controllers with built-in hardware ECC
@@ -256,16 +253,16 @@
config MTD_NAND_AT91
bool "Support for NAND Flash / SmartMedia on AT91"
- depends on MTD_NAND && ARCH_AT91
+ depends on ARCH_AT91
help
Enables support for NAND Flash / Smart Media Card interface
on Atmel AT91 processors.
config MTD_NAND_NANDSIM
tristate "Support for NAND Flash Simulator"
- depends on MTD_NAND && MTD_PARTITIONS
+ depends on MTD_PARTITIONS
help
The simulator may simulate various NAND flash chips for the
MTD nand layer.
-endmenu
+endif # MTD_NAND