| /* |
| * linux/drivers/mmc/core/mmc.c |
| * |
| * Copyright (C) 2003-2004 Russell King, All Rights Reserved. |
| * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved. |
| * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/err.h> |
| |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/mmc.h> |
| |
| #include "core.h" |
| #include "bus.h" |
| #include "mmc_ops.h" |
| |
| static const unsigned int tran_exp[] = { |
| 10000, 100000, 1000000, 10000000, |
| 0, 0, 0, 0 |
| }; |
| |
| static const unsigned char tran_mant[] = { |
| 0, 10, 12, 13, 15, 20, 25, 30, |
| 35, 40, 45, 50, 55, 60, 70, 80, |
| }; |
| |
| static const unsigned int tacc_exp[] = { |
| 1, 10, 100, 1000, 10000, 100000, 1000000, 10000000, |
| }; |
| |
| static const unsigned int tacc_mant[] = { |
| 0, 10, 12, 13, 15, 20, 25, 30, |
| 35, 40, 45, 50, 55, 60, 70, 80, |
| }; |
| |
| #define UNSTUFF_BITS(resp,start,size) \ |
| ({ \ |
| const int __size = size; \ |
| const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1; \ |
| const int __off = 3 - ((start) / 32); \ |
| const int __shft = (start) & 31; \ |
| u32 __res; \ |
| \ |
| __res = resp[__off] >> __shft; \ |
| if (__size + __shft > 32) \ |
| __res |= resp[__off-1] << ((32 - __shft) % 32); \ |
| __res & __mask; \ |
| }) |
| |
| /* |
| * Given the decoded CSD structure, decode the raw CID to our CID structure. |
| */ |
| static int mmc_decode_cid(struct mmc_card *card) |
| { |
| u32 *resp = card->raw_cid; |
| |
| /* |
| * The selection of the format here is based upon published |
| * specs from sandisk and from what people have reported. |
| */ |
| switch (card->csd.mmca_vsn) { |
| case 0: /* MMC v1.0 - v1.2 */ |
| case 1: /* MMC v1.4 */ |
| card->cid.manfid = UNSTUFF_BITS(resp, 104, 24); |
| card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); |
| card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); |
| card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); |
| card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); |
| card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); |
| card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); |
| card->cid.prod_name[6] = UNSTUFF_BITS(resp, 48, 8); |
| card->cid.hwrev = UNSTUFF_BITS(resp, 44, 4); |
| card->cid.fwrev = UNSTUFF_BITS(resp, 40, 4); |
| card->cid.serial = UNSTUFF_BITS(resp, 16, 24); |
| card->cid.month = UNSTUFF_BITS(resp, 12, 4); |
| card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; |
| break; |
| |
| case 2: /* MMC v2.0 - v2.2 */ |
| case 3: /* MMC v3.1 - v3.3 */ |
| case 4: /* MMC v4 */ |
| card->cid.manfid = UNSTUFF_BITS(resp, 120, 8); |
| card->cid.oemid = UNSTUFF_BITS(resp, 104, 16); |
| card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8); |
| card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8); |
| card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8); |
| card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8); |
| card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8); |
| card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8); |
| card->cid.serial = UNSTUFF_BITS(resp, 16, 32); |
| card->cid.month = UNSTUFF_BITS(resp, 12, 4); |
| card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997; |
| break; |
| |
| default: |
| printk(KERN_ERR "%s: card has unknown MMCA version %d\n", |
| mmc_hostname(card->host), card->csd.mmca_vsn); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Given a 128-bit response, decode to our card CSD structure. |
| */ |
| static int mmc_decode_csd(struct mmc_card *card) |
| { |
| struct mmc_csd *csd = &card->csd; |
| unsigned int e, m, csd_struct; |
| u32 *resp = card->raw_csd; |
| |
| /* |
| * We only understand CSD structure v1.1 and v1.2. |
| * v1.2 has extra information in bits 15, 11 and 10. |
| */ |
| csd_struct = UNSTUFF_BITS(resp, 126, 2); |
| if (csd_struct != 1 && csd_struct != 2) { |
| printk(KERN_ERR "%s: unrecognised CSD structure version %d\n", |
| mmc_hostname(card->host), csd_struct); |
| return -EINVAL; |
| } |
| |
| csd->mmca_vsn = UNSTUFF_BITS(resp, 122, 4); |
| m = UNSTUFF_BITS(resp, 115, 4); |
| e = UNSTUFF_BITS(resp, 112, 3); |
| csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10; |
| csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100; |
| |
| m = UNSTUFF_BITS(resp, 99, 4); |
| e = UNSTUFF_BITS(resp, 96, 3); |
| csd->max_dtr = tran_exp[e] * tran_mant[m]; |
| csd->cmdclass = UNSTUFF_BITS(resp, 84, 12); |
| |
| e = UNSTUFF_BITS(resp, 47, 3); |
| m = UNSTUFF_BITS(resp, 62, 12); |
| csd->capacity = (1 + m) << (e + 2); |
| |
| csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); |
| csd->read_partial = UNSTUFF_BITS(resp, 79, 1); |
| csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); |
| csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); |
| csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); |
| csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); |
| csd->write_partial = UNSTUFF_BITS(resp, 21, 1); |
| |
| return 0; |
| } |
| |
| /* |
| * Read and decode extended CSD. |
| */ |
| static int mmc_read_ext_csd(struct mmc_card *card) |
| { |
| int err; |
| u8 *ext_csd; |
| |
| BUG_ON(!card); |
| |
| if (card->csd.mmca_vsn < CSD_SPEC_VER_4) |
| return 0; |
| |
| /* |
| * As the ext_csd is so large and mostly unused, we don't store the |
| * raw block in mmc_card. |
| */ |
| ext_csd = kmalloc(512, GFP_KERNEL); |
| if (!ext_csd) { |
| printk(KERN_ERR "%s: could not allocate a buffer to " |
| "receive the ext_csd.\n", mmc_hostname(card->host)); |
| return -ENOMEM; |
| } |
| |
| err = mmc_send_ext_csd(card, ext_csd); |
| if (err) { |
| /* |
| * We all hosts that cannot perform the command |
| * to fail more gracefully |
| */ |
| if (err != -EINVAL) |
| goto out; |
| |
| /* |
| * High capacity cards should have this "magic" size |
| * stored in their CSD. |
| */ |
| if (card->csd.capacity == (4096 * 512)) { |
| printk(KERN_ERR "%s: unable to read EXT_CSD " |
| "on a possible high capacity card. " |
| "Card will be ignored.\n", |
| mmc_hostname(card->host)); |
| } else { |
| printk(KERN_WARNING "%s: unable to read " |
| "EXT_CSD, performance might " |
| "suffer.\n", |
| mmc_hostname(card->host)); |
| err = 0; |
| } |
| |
| goto out; |
| } |
| |
| card->ext_csd.rev = ext_csd[EXT_CSD_REV]; |
| if (card->ext_csd.rev > 3) { |
| printk(KERN_ERR "%s: unrecognised EXT_CSD structure " |
| "version %d\n", mmc_hostname(card->host), |
| card->ext_csd.rev); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| if (card->ext_csd.rev >= 2) { |
| card->ext_csd.sectors = |
| ext_csd[EXT_CSD_SEC_CNT + 0] << 0 | |
| ext_csd[EXT_CSD_SEC_CNT + 1] << 8 | |
| ext_csd[EXT_CSD_SEC_CNT + 2] << 16 | |
| ext_csd[EXT_CSD_SEC_CNT + 3] << 24; |
| if (card->ext_csd.sectors) |
| mmc_card_set_blockaddr(card); |
| } |
| |
| switch (ext_csd[EXT_CSD_CARD_TYPE]) { |
| case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: |
| card->ext_csd.hs_max_dtr = 52000000; |
| break; |
| case EXT_CSD_CARD_TYPE_26: |
| card->ext_csd.hs_max_dtr = 26000000; |
| break; |
| default: |
| /* MMC v4 spec says this cannot happen */ |
| printk(KERN_WARNING "%s: card is mmc v4 but doesn't " |
| "support any high-speed modes.\n", |
| mmc_hostname(card->host)); |
| goto out; |
| } |
| |
| if (card->ext_csd.rev >= 3) { |
| u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT]; |
| |
| /* Sleep / awake timeout in 100ns units */ |
| if (sa_shift > 0 && sa_shift <= 0x17) |
| card->ext_csd.sa_timeout = |
| 1 << ext_csd[EXT_CSD_S_A_TIMEOUT]; |
| } |
| |
| out: |
| kfree(ext_csd); |
| |
| return err; |
| } |
| |
| MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1], |
| card->raw_cid[2], card->raw_cid[3]); |
| MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1], |
| card->raw_csd[2], card->raw_csd[3]); |
| MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year); |
| MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev); |
| MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev); |
| MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); |
| MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name); |
| MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid); |
| MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial); |
| |
| static struct attribute *mmc_std_attrs[] = { |
| &dev_attr_cid.attr, |
| &dev_attr_csd.attr, |
| &dev_attr_date.attr, |
| &dev_attr_fwrev.attr, |
| &dev_attr_hwrev.attr, |
| &dev_attr_manfid.attr, |
| &dev_attr_name.attr, |
| &dev_attr_oemid.attr, |
| &dev_attr_serial.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group mmc_std_attr_group = { |
| .attrs = mmc_std_attrs, |
| }; |
| |
| static const struct attribute_group *mmc_attr_groups[] = { |
| &mmc_std_attr_group, |
| NULL, |
| }; |
| |
| static struct device_type mmc_type = { |
| .groups = mmc_attr_groups, |
| }; |
| |
| /* |
| * Handle the detection and initialisation of a card. |
| * |
| * In the case of a resume, "oldcard" will contain the card |
| * we're trying to reinitialise. |
| */ |
| static int mmc_init_card(struct mmc_host *host, u32 ocr, |
| struct mmc_card *oldcard) |
| { |
| struct mmc_card *card; |
| int err; |
| u32 cid[4]; |
| unsigned int max_dtr; |
| |
| BUG_ON(!host); |
| WARN_ON(!host->claimed); |
| |
| /* |
| * Since we're changing the OCR value, we seem to |
| * need to tell some cards to go back to the idle |
| * state. We wait 1ms to give cards time to |
| * respond. |
| */ |
| mmc_go_idle(host); |
| |
| /* The extra bit indicates that we support high capacity */ |
| err = mmc_send_op_cond(host, ocr | (1 << 30), NULL); |
| if (err) |
| goto err; |
| |
| /* |
| * For SPI, enable CRC as appropriate. |
| */ |
| if (mmc_host_is_spi(host)) { |
| err = mmc_spi_set_crc(host, use_spi_crc); |
| if (err) |
| goto err; |
| } |
| |
| /* |
| * Fetch CID from card. |
| */ |
| if (mmc_host_is_spi(host)) |
| err = mmc_send_cid(host, cid); |
| else |
| err = mmc_all_send_cid(host, cid); |
| if (err) |
| goto err; |
| |
| if (oldcard) { |
| if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) { |
| err = -ENOENT; |
| goto err; |
| } |
| |
| card = oldcard; |
| } else { |
| /* |
| * Allocate card structure. |
| */ |
| card = mmc_alloc_card(host, &mmc_type); |
| if (IS_ERR(card)) { |
| err = PTR_ERR(card); |
| goto err; |
| } |
| |
| card->type = MMC_TYPE_MMC; |
| card->rca = 1; |
| memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); |
| } |
| |
| /* |
| * For native busses: set card RCA and quit open drain mode. |
| */ |
| if (!mmc_host_is_spi(host)) { |
| err = mmc_set_relative_addr(card); |
| if (err) |
| goto free_card; |
| |
| mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); |
| } |
| |
| if (!oldcard) { |
| /* |
| * Fetch CSD from card. |
| */ |
| err = mmc_send_csd(card, card->raw_csd); |
| if (err) |
| goto free_card; |
| |
| err = mmc_decode_csd(card); |
| if (err) |
| goto free_card; |
| err = mmc_decode_cid(card); |
| if (err) |
| goto free_card; |
| } |
| |
| /* |
| * Select card, as all following commands rely on that. |
| */ |
| if (!mmc_host_is_spi(host)) { |
| err = mmc_select_card(card); |
| if (err) |
| goto free_card; |
| } |
| |
| if (!oldcard) { |
| /* |
| * Fetch and process extended CSD. |
| */ |
| err = mmc_read_ext_csd(card); |
| if (err) |
| goto free_card; |
| } |
| |
| /* |
| * Activate high speed (if supported) |
| */ |
| if ((card->ext_csd.hs_max_dtr != 0) && |
| (host->caps & MMC_CAP_MMC_HIGHSPEED)) { |
| err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, |
| EXT_CSD_HS_TIMING, 1); |
| if (err && err != -EBADMSG) |
| goto free_card; |
| |
| if (err) { |
| printk(KERN_WARNING "%s: switch to highspeed failed\n", |
| mmc_hostname(card->host)); |
| err = 0; |
| } else { |
| mmc_card_set_highspeed(card); |
| mmc_set_timing(card->host, MMC_TIMING_MMC_HS); |
| } |
| } |
| |
| /* |
| * Compute bus speed. |
| */ |
| max_dtr = (unsigned int)-1; |
| |
| if (mmc_card_highspeed(card)) { |
| if (max_dtr > card->ext_csd.hs_max_dtr) |
| max_dtr = card->ext_csd.hs_max_dtr; |
| } else if (max_dtr > card->csd.max_dtr) { |
| max_dtr = card->csd.max_dtr; |
| } |
| |
| mmc_set_clock(host, max_dtr); |
| |
| /* |
| * Activate wide bus (if supported). |
| */ |
| if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) && |
| (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) { |
| unsigned ext_csd_bit, bus_width; |
| |
| if (host->caps & MMC_CAP_8_BIT_DATA) { |
| ext_csd_bit = EXT_CSD_BUS_WIDTH_8; |
| bus_width = MMC_BUS_WIDTH_8; |
| } else { |
| ext_csd_bit = EXT_CSD_BUS_WIDTH_4; |
| bus_width = MMC_BUS_WIDTH_4; |
| } |
| |
| err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, |
| EXT_CSD_BUS_WIDTH, ext_csd_bit); |
| |
| if (err && err != -EBADMSG) |
| goto free_card; |
| |
| if (err) { |
| printk(KERN_WARNING "%s: switch to bus width %d " |
| "failed\n", mmc_hostname(card->host), |
| 1 << bus_width); |
| err = 0; |
| } else { |
| mmc_set_bus_width(card->host, bus_width); |
| } |
| } |
| |
| if (!oldcard) |
| host->card = card; |
| |
| return 0; |
| |
| free_card: |
| if (!oldcard) |
| mmc_remove_card(card); |
| err: |
| |
| return err; |
| } |
| |
| /* |
| * Host is being removed. Free up the current card. |
| */ |
| static void mmc_remove(struct mmc_host *host) |
| { |
| BUG_ON(!host); |
| BUG_ON(!host->card); |
| |
| mmc_remove_card(host->card); |
| host->card = NULL; |
| } |
| |
| /* |
| * Card detection callback from host. |
| */ |
| static void mmc_detect(struct mmc_host *host) |
| { |
| int err; |
| |
| BUG_ON(!host); |
| BUG_ON(!host->card); |
| |
| mmc_claim_host(host); |
| |
| /* |
| * Just check if our card has been removed. |
| */ |
| err = mmc_send_status(host->card, NULL); |
| |
| mmc_release_host(host); |
| |
| if (err) { |
| mmc_remove(host); |
| |
| mmc_claim_host(host); |
| mmc_detach_bus(host); |
| mmc_release_host(host); |
| } |
| } |
| |
| /* |
| * Suspend callback from host. |
| */ |
| static void mmc_suspend(struct mmc_host *host) |
| { |
| BUG_ON(!host); |
| BUG_ON(!host->card); |
| |
| mmc_claim_host(host); |
| if (!mmc_host_is_spi(host)) |
| mmc_deselect_cards(host); |
| host->card->state &= ~MMC_STATE_HIGHSPEED; |
| mmc_release_host(host); |
| } |
| |
| /* |
| * Resume callback from host. |
| * |
| * This function tries to determine if the same card is still present |
| * and, if so, restore all state to it. |
| */ |
| static void mmc_resume(struct mmc_host *host) |
| { |
| int err; |
| |
| BUG_ON(!host); |
| BUG_ON(!host->card); |
| |
| mmc_claim_host(host); |
| err = mmc_init_card(host, host->ocr, host->card); |
| mmc_release_host(host); |
| |
| if (err) { |
| mmc_remove(host); |
| |
| mmc_claim_host(host); |
| mmc_detach_bus(host); |
| mmc_release_host(host); |
| } |
| |
| } |
| |
| static void mmc_power_restore(struct mmc_host *host) |
| { |
| host->card->state &= ~MMC_STATE_HIGHSPEED; |
| mmc_claim_host(host); |
| mmc_init_card(host, host->ocr, host->card); |
| mmc_release_host(host); |
| } |
| |
| static int mmc_sleep(struct mmc_host *host) |
| { |
| struct mmc_card *card = host->card; |
| int err = -ENOSYS; |
| |
| if (card && card->ext_csd.rev >= 3) { |
| err = mmc_card_sleepawake(host, 1); |
| if (err < 0) |
| pr_debug("%s: Error %d while putting card into sleep", |
| mmc_hostname(host), err); |
| } |
| |
| return err; |
| } |
| |
| static int mmc_awake(struct mmc_host *host) |
| { |
| struct mmc_card *card = host->card; |
| int err = -ENOSYS; |
| |
| if (card && card->ext_csd.rev >= 3) { |
| err = mmc_card_sleepawake(host, 0); |
| if (err < 0) |
| pr_debug("%s: Error %d while awaking sleeping card", |
| mmc_hostname(host), err); |
| } |
| |
| return err; |
| } |
| |
| #ifdef CONFIG_MMC_UNSAFE_RESUME |
| |
| static const struct mmc_bus_ops mmc_ops = { |
| .awake = mmc_awake, |
| .sleep = mmc_sleep, |
| .remove = mmc_remove, |
| .detect = mmc_detect, |
| .suspend = mmc_suspend, |
| .resume = mmc_resume, |
| .power_restore = mmc_power_restore, |
| }; |
| |
| static void mmc_attach_bus_ops(struct mmc_host *host) |
| { |
| mmc_attach_bus(host, &mmc_ops); |
| } |
| |
| #else |
| |
| static const struct mmc_bus_ops mmc_ops = { |
| .awake = mmc_awake, |
| .sleep = mmc_sleep, |
| .remove = mmc_remove, |
| .detect = mmc_detect, |
| .suspend = NULL, |
| .resume = NULL, |
| .power_restore = mmc_power_restore, |
| }; |
| |
| static const struct mmc_bus_ops mmc_ops_unsafe = { |
| .awake = mmc_awake, |
| .sleep = mmc_sleep, |
| .remove = mmc_remove, |
| .detect = mmc_detect, |
| .suspend = mmc_suspend, |
| .resume = mmc_resume, |
| .power_restore = mmc_power_restore, |
| }; |
| |
| static void mmc_attach_bus_ops(struct mmc_host *host) |
| { |
| const struct mmc_bus_ops *bus_ops; |
| |
| if (host->caps & MMC_CAP_NONREMOVABLE) |
| bus_ops = &mmc_ops_unsafe; |
| else |
| bus_ops = &mmc_ops; |
| mmc_attach_bus(host, bus_ops); |
| } |
| |
| #endif |
| |
| /* |
| * Starting point for MMC card init. |
| */ |
| int mmc_attach_mmc(struct mmc_host *host, u32 ocr) |
| { |
| int err; |
| |
| BUG_ON(!host); |
| WARN_ON(!host->claimed); |
| |
| mmc_attach_bus_ops(host); |
| |
| /* |
| * We need to get OCR a different way for SPI. |
| */ |
| if (mmc_host_is_spi(host)) { |
| err = mmc_spi_read_ocr(host, 1, &ocr); |
| if (err) |
| goto err; |
| } |
| |
| /* |
| * Sanity check the voltages that the card claims to |
| * support. |
| */ |
| if (ocr & 0x7F) { |
| printk(KERN_WARNING "%s: card claims to support voltages " |
| "below the defined range. These will be ignored.\n", |
| mmc_hostname(host)); |
| ocr &= ~0x7F; |
| } |
| |
| host->ocr = mmc_select_voltage(host, ocr); |
| |
| /* |
| * Can we support the voltage of the card? |
| */ |
| if (!host->ocr) { |
| err = -EINVAL; |
| goto err; |
| } |
| |
| /* |
| * Detect and init the card. |
| */ |
| err = mmc_init_card(host, host->ocr, NULL); |
| if (err) |
| goto err; |
| |
| mmc_release_host(host); |
| |
| err = mmc_add_card(host->card); |
| if (err) |
| goto remove_card; |
| |
| return 0; |
| |
| remove_card: |
| mmc_remove_card(host->card); |
| host->card = NULL; |
| mmc_claim_host(host); |
| err: |
| mmc_detach_bus(host); |
| mmc_release_host(host); |
| |
| printk(KERN_ERR "%s: error %d whilst initialising MMC card\n", |
| mmc_hostname(host), err); |
| |
| return err; |
| } |