Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
hwmon: (smsc47m1) restore missing name attribute
hwmon: (w83627ehf) don't assume bank 0
hwmon: (w83627ehf) read fan_div values during probe
hwmon: fix w83781d temp sensor type setting
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index 338ee4f..d318196 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -585,6 +585,8 @@
if ((err = device_create_file(dev, &dev_attr_alarms)))
goto error_remove_files;
+ if ((err = device_create_file(dev, &dev_attr_name)))
+ goto error_remove_files;
data->class_dev = hwmon_device_register(dev);
if (IS_ERR(data->class_dev)) {
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index c51ae2e..d9a9ec7 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -309,18 +309,16 @@
|| (reg & 0x00ff) == 0x55));
}
-/* We assume that the default bank is 0, thus the following two functions do
- nothing for registers which live in bank 0. For others, they respectively
- set the bank register to the correct value (before the register is
- accessed), and back to 0 (afterwards). */
+/* Registers 0x50-0x5f are banked */
static inline void w83627ehf_set_bank(struct w83627ehf_data *data, u16 reg)
{
- if (reg & 0xff00) {
+ if ((reg & 0x00f0) == 0x50) {
outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET);
outb_p(reg >> 8, data->addr + DATA_REG_OFFSET);
}
}
+/* Not strictly necessary, but play it safe for now */
static inline void w83627ehf_reset_bank(struct w83627ehf_data *data, u16 reg)
{
if (reg & 0xff00) {
@@ -421,6 +419,31 @@
}
}
+static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
+{
+ int i;
+
+ i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
+ data->fan_div[0] = (i >> 4) & 0x03;
+ data->fan_div[1] = (i >> 6) & 0x03;
+ i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2);
+ data->fan_div[2] = (i >> 6) & 0x03;
+ i = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
+ data->fan_div[0] |= (i >> 3) & 0x04;
+ data->fan_div[1] |= (i >> 4) & 0x04;
+ data->fan_div[2] |= (i >> 5) & 0x04;
+ if (data->has_fan & ((1 << 3) | (1 << 4))) {
+ i = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
+ data->fan_div[3] = i & 0x03;
+ data->fan_div[4] = ((i >> 2) & 0x03)
+ | ((i >> 5) & 0x04);
+ }
+ if (data->has_fan & (1 << 3)) {
+ i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT);
+ data->fan_div[3] |= (i >> 5) & 0x04;
+ }
+}
+
static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
{
struct w83627ehf_data *data = dev_get_drvdata(dev);
@@ -432,25 +455,7 @@
if (time_after(jiffies, data->last_updated + HZ + HZ/2)
|| !data->valid) {
/* Fan clock dividers */
- i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
- data->fan_div[0] = (i >> 4) & 0x03;
- data->fan_div[1] = (i >> 6) & 0x03;
- i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2);
- data->fan_div[2] = (i >> 6) & 0x03;
- i = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
- data->fan_div[0] |= (i >> 3) & 0x04;
- data->fan_div[1] |= (i >> 4) & 0x04;
- data->fan_div[2] |= (i >> 5) & 0x04;
- if (data->has_fan & ((1 << 3) | (1 << 4))) {
- i = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
- data->fan_div[3] = i & 0x03;
- data->fan_div[4] = ((i >> 2) & 0x03)
- | ((i >> 5) & 0x04);
- }
- if (data->has_fan & (1 << 3)) {
- i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT);
- data->fan_div[3] |= (i >> 5) & 0x04;
- }
+ w83627ehf_update_fan_div(data);
/* Measured voltages and limits */
for (i = 0; i < data->in_num; i++) {
@@ -1312,6 +1317,9 @@
if (!(i & (1 << 1)) && (!fan5pin))
data->has_fan |= (1 << 4);
+ /* Read fan clock dividers immediately */
+ w83627ehf_update_fan_div(data);
+
/* Register sysfs hooks */
for (i = 0; i < ARRAY_SIZE(sda_sf3_arrays); i++)
if ((err = device_create_file(dev,
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index f85b48f..c95909c 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -740,9 +740,9 @@
static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR,
show_sensor, store_sensor, 0);
static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR,
- show_sensor, store_sensor, 0);
+ show_sensor, store_sensor, 1);
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR,
- show_sensor, store_sensor, 0);
+ show_sensor, store_sensor, 2);
/* I2C devices get this name attribute automatically, but for ISA devices
we must create it by ourselves. */