Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (49 commits)
[GFS2] fix assertion in log_refund()
[GFS2] fix GFP_KERNEL misuses
[GFS2] test for IS_ERR rather than 0
[GFS2] Invalidate cache at correct point
[GFS2] fs/gfs2/recovery.c: suppress warnings
[GFS2] Faster gfs2_bitfit algorithm
[GFS2] Streamline quota lock/check for no-quota case
[GFS2] Remove drop of module ref where not needed
[GFS2] gfs2_adjust_quota has broken unstuffing code
[GFS2] possible null pointer dereference fixup
[GFS2] Need to ensure that sector_t is 64bits for GFS2
[GFS2] re-support special inode
[GFS2] remove gfs2_dev_iops
[GFS2] fix file_system_type leak on gfs2meta mount
[GFS2] Allow bmap to allocate extents
[GFS2] Fix a page lock / glock deadlock
[GFS2] proper extern for gfs2/locking/dlm/mount.c:gdlm_ops
[GFS2] gfs2/ops_file.c should #include "ops_inode.h"
[GFS2] be*_add_cpu conversion
[GFS2] Fix bug where we called drop_bh incorrectly
...
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index fc8e7c7..f7923a4 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -167,10 +167,8 @@
- notes on the change from 16 bit to 32 bit user/group IDs.
hpet.txt
- High Precision Event Timer Driver for Linux.
-hrtimer/
- - info on the timer_stats debugging facility for timer (ab)use.
-hrtimers/
- - info on the hrtimers subsystem for high-resolution kernel timers.
+timers/
+ - info on the timer related topics
hw_random.txt
- info on Linux support for random number generator in i8xx chipsets.
hwmon/
@@ -271,8 +269,6 @@
- directory with information on the NetLabel subsystem.
networking/
- directory with info on various aspects of networking with Linux.
-nfsroot.txt
- - short guide on setting up a diskless box with NFS root filesystem.
nmi_watchdog.txt
- info on NMI watchdog for SMP systems.
nommu-mmap.txt
@@ -321,8 +317,6 @@
- a description of what robust futexes are.
rocket.txt
- info on the Comtrol RocketPort multiport serial driver.
-rpc-cache.txt
- - introduction to the caching mechanisms in the sunrpc layer.
rt-mutex-design.txt
- description of the RealTime mutex implementation design.
rt-mutex.txt
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 300e170..e471bc4 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -9,7 +9,7 @@
DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml networking.xml \
- kernel-api.xml filesystems.xml lsm.xml usb.xml \
+ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
new file mode 100644
index 0000000..97618be
--- /dev/null
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -0,0 +1,447 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="kgdbOnLinux">
+ <bookinfo>
+ <title>Using kgdb and the kgdb Internals</title>
+
+ <authorgroup>
+ <author>
+ <firstname>Jason</firstname>
+ <surname>Wessel</surname>
+ <affiliation>
+ <address>
+ <email>jason.wessel@windriver.com</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <authorgroup>
+ <author>
+ <firstname>Tom</firstname>
+ <surname>Rini</surname>
+ <affiliation>
+ <address>
+ <email>trini@kernel.crashing.org</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <authorgroup>
+ <author>
+ <firstname>Amit S.</firstname>
+ <surname>Kale</surname>
+ <affiliation>
+ <address>
+ <email>amitkale@linsyssoft.com</email>
+ </address>
+ </affiliation>
+ </author>
+ </authorgroup>
+
+ <copyright>
+ <year>2008</year>
+ <holder>Wind River Systems, Inc.</holder>
+ </copyright>
+ <copyright>
+ <year>2004-2005</year>
+ <holder>MontaVista Software, Inc.</holder>
+ </copyright>
+ <copyright>
+ <year>2004</year>
+ <holder>Amit S. Kale</holder>
+ </copyright>
+
+ <legalnotice>
+ <para>
+ This file is licensed under the terms of the GNU General Public License
+ version 2. This program is licensed "as is" without any warranty of any
+ kind, whether express or implied.
+ </para>
+
+ </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+ <chapter id="Introduction">
+ <title>Introduction</title>
+ <para>
+ kgdb is a source level debugger for linux kernel. It is used along
+ with gdb to debug a linux kernel. The expectation is that gdb can
+ be used to "break in" to the kernel to inspect memory, variables
+ and look through a cal stack information similar to what an
+ application developer would use gdb for. It is possible to place
+ breakpoints in kernel code and perform some limited execution
+ stepping.
+ </para>
+ <para>
+ Two machines are required for using kgdb. One of these machines is a
+ development machine and the other is a test machine. The kernel
+ to be debugged runs on the test machine. The development machine
+ runs an instance of gdb against the vmlinux file which contains
+ the symbols (not boot image such as bzImage, zImage, uImage...).
+ In gdb the developer specifies the connection parameters and
+ connects to kgdb. Depending on which kgdb I/O modules exist in
+ the kernel for a given architecture, it may be possible to debug
+ the test machine's kernel with the development machine using a
+ rs232 or ethernet connection.
+ </para>
+ </chapter>
+ <chapter id="CompilingAKernel">
+ <title>Compiling a kernel</title>
+ <para>
+ To enable <symbol>CONFIG_KGDB</symbol>, look under the "Kernel debugging"
+ and then select "KGDB: kernel debugging with remote gdb".
+ </para>
+ <para>
+ Next you should choose one of more I/O drivers to interconnect debugging
+ host and debugged target. Early boot debugging requires a KGDB
+ I/O driver that supports early debugging and the driver must be
+ built into the kernel directly. Kgdb I/O driver configuration
+ takes place via kernel or module parameters, see following
+ chapter.
+ </para>
+ <para>
+ The kgdb test compile options are described in the kgdb test suite chapter.
+ </para>
+
+ </chapter>
+ <chapter id="EnableKGDB">
+ <title>Enable kgdb for debugging</title>
+ <para>
+ In order to use kgdb you must activate it by passing configuration
+ information to one of the kgdb I/O drivers. If you do not pass any
+ configuration information kgdb will not do anything at all. Kgdb
+ will only actively hook up to the kernel trap hooks if a kgdb I/O
+ driver is loaded and configured. If you unconfigure a kgdb I/O
+ driver, kgdb will unregister all the kernel hook points.
+ </para>
+ <para>
+ All drivers can be reconfigured at run time, if
+ <symbol>CONFIG_SYSFS</symbol> and <symbol>CONFIG_MODULES</symbol>
+ are enabled, by echo'ing a new config string to
+ <constant>/sys/module/<driver>/parameter/<option></constant>.
+ The driver can be unconfigured by passing an empty string. You cannot
+ change the configuration while the debugger is attached. Make sure
+ to detach the debugger with the <constant>detach</constant> command
+ prior to trying unconfigure a kgdb I/O driver.
+ </para>
+ <sect1 id="kgdbwait">
+ <title>Kernel parameter: kgdbwait</title>
+ <para>
+ The Kernel command line option <constant>kgdbwait</constant> makes
+ kgdb wait for a debugger connection during booting of a kernel. You
+ can only use this option you compiled a kgdb I/O driver into the
+ kernel and you specified the I/O driver configuration as a kernel
+ command line option. The kgdbwait parameter should always follow the
+ configuration parameter for the kgdb I/O driver in the kernel
+ command line else the I/O driver will not be configured prior to
+ asking the kernel to use it to wait.
+ </para>
+ <para>
+ The kernel will stop and wait as early as the I/O driver and
+ architecture will allow when you use this option. If you build the
+ kgdb I/O driver as a kernel module kgdbwait will not do anything.
+ </para>
+ </sect1>
+ <sect1 id="kgdboc">
+ <title>Kernel parameter: kgdboc</title>
+ <para>
+ The kgdboc driver was originally an abbreviation meant to stand for
+ "kgdb over console". Kgdboc is designed to work with a single
+ serial port. It was meant to cover the circumstance
+ where you wanted to use a serial console as your primary console as
+ well as using it to perform kernel debugging. Of course you can
+ also use kgdboc without assigning a console to the same port.
+ </para>
+ <sect2 id="UsingKgdboc">
+ <title>Using kgdboc</title>
+ <para>
+ You can configure kgdboc via sysfs or a module or kernel boot line
+ parameter depending on if you build with CONFIG_KGDBOC as a module
+ or built-in.
+ <orderedlist>
+ <listitem><para>From the module load or build-in</para>
+ <para><constant>kgdboc=<tty-device>,[baud]</constant></para>
+ <para>
+ The example here would be if your console port was typically ttyS0, you would use something like <constant>kgdboc=ttyS0,115200</constant> or on the ARM Versatile AB you would likely use <constant>kgdboc=ttyAMA0,115200</constant>
+ </para>
+ </listitem>
+ <listitem><para>From sysfs</para>
+ <para><constant>echo ttyS0 > /sys/module/kgdboc/parameters/kgdboc</constant></para>
+ </listitem>
+ </orderedlist>
+ </para>
+ <para>
+ NOTE: Kgdboc does not support interrupting the target via the
+ gdb remote protocol. You must manually send a sysrq-g unless you
+ have a proxy that splits console output to a terminal problem and
+ has a separate port for the debugger to connect to that sends the
+ sysrq-g for you.
+ </para>
+ <para>When using kgdboc with no debugger proxy, you can end up
+ connecting the debugger for one of two entry points. If an
+ exception occurs after you have loaded kgdboc a message should print
+ on the console stating it is waiting for the debugger. In case you
+ disconnect your terminal program and then connect the debugger in
+ its place. If you want to interrupt the target system and forcibly
+ enter a debug session you have to issue a Sysrq sequence and then
+ type the letter <constant>g</constant>. Then you disconnect the
+ terminal session and connect gdb. Your options if you don't like
+ this are to hack gdb to send the sysrq-g for you as well as on the
+ initial connect, or to use a debugger proxy that allows an
+ unmodified gdb to do the debugging.
+ </para>
+ </sect2>
+ </sect1>
+ <sect1 id="kgdbcon">
+ <title>Kernel parameter: kgdbcon</title>
+ <para>
+ Kgdb supports using the gdb serial protocol to send console messages
+ to the debugger when the debugger is connected and running. There
+ are two ways to activate this feature.
+ <orderedlist>
+ <listitem><para>Activate with the kernel command line option:</para>
+ <para><constant>kgdbcon</constant></para>
+ </listitem>
+ <listitem><para>Use sysfs before configuring an io driver</para>
+ <para>
+ <constant>echo 1 > /sys/module/kgdb/parameters/kgdb_use_con</constant>
+ </para>
+ <para>
+ NOTE: If you do this after you configure the kgdb I/O driver, the
+ setting will not take effect until the next point the I/O is
+ reconfigured.
+ </para>
+ </listitem>
+ </orderedlist>
+ </para>
+ <para>
+ IMPORTANT NOTE: Using this option with kgdb over the console
+ (kgdboc) or kgdb over ethernet (kgdboe) is not supported.
+ </para>
+ </sect1>
+ </chapter>
+ <chapter id="ConnectingGDB">
+ <title>Connecting gdb</title>
+ <para>
+ If you are using kgdboc, you need to have used kgdbwait as a boot
+ argument, issued a sysrq-g, or the system you are going to debug
+ has already taken an exception and is waiting for the debugger to
+ attach before you can connect gdb.
+ </para>
+ <para>
+ If you are not using different kgdb I/O driver other than kgdboc,
+ you should be able to connect and the target will automatically
+ respond.
+ </para>
+ <para>
+ Example (using a serial port):
+ </para>
+ <programlisting>
+ % gdb ./vmlinux
+ (gdb) set remotebaud 115200
+ (gdb) target remote /dev/ttyS0
+ </programlisting>
+ <para>
+ Example (kgdb to a terminal server):
+ </para>
+ <programlisting>
+ % gdb ./vmlinux
+ (gdb) target remote udp:192.168.2.2:6443
+ </programlisting>
+ <para>
+ Example (kgdb over ethernet):
+ </para>
+ <programlisting>
+ % gdb ./vmlinux
+ (gdb) target remote udp:192.168.2.2:6443
+ </programlisting>
+ <para>
+ Once connected, you can debug a kernel the way you would debug an
+ application program.
+ </para>
+ <para>
+ If you are having problems connecting or something is going
+ seriously wrong while debugging, it will most often be the case
+ that you want to enable gdb to be verbose about its target
+ communications. You do this prior to issuing the <constant>target
+ remote</constant> command by typing in: <constant>set remote debug 1</constant>
+ </para>
+ </chapter>
+ <chapter id="KGDBTestSuite">
+ <title>kgdb Test Suite</title>
+ <para>
+ When kgdb is enabled in the kernel config you can also elect to
+ enable the config parameter KGDB_TESTS. Turning this on will
+ enable a special kgdb I/O module which is designed to test the
+ kgdb internal functions.
+ </para>
+ <para>
+ The kgdb tests are mainly intended for developers to test the kgdb
+ internals as well as a tool for developing a new kgdb architecture
+ specific implementation. These tests are not really for end users
+ of the Linux kernel. The primary source of documentation would be
+ to look in the drivers/misc/kgdbts.c file.
+ </para>
+ <para>
+ The kgdb test suite can also be configured at compile time to run
+ the core set of tests by setting the kernel config parameter
+ KGDB_TESTS_ON_BOOT. This particular option is aimed at automated
+ regression testing and does not require modifying the kernel boot
+ config arguments. If this is turned on, the kgdb test suite can
+ be disabled by specifying "kgdbts=" as a kernel boot argument.
+ </para>
+ </chapter>
+ <chapter id="CommonBackEndReq">
+ <title>KGDB Internals</title>
+ <sect1 id="kgdbArchitecture">
+ <title>Architecture Specifics</title>
+ <para>
+ Kgdb is organized into three basic components:
+ <orderedlist>
+ <listitem><para>kgdb core</para>
+ <para>
+ The kgdb core is found in kernel/kgdb.c. It contains:
+ <itemizedlist>
+ <listitem><para>All the logic to implement the gdb serial protocol</para></listitem>
+ <listitem><para>A generic OS exception handler which includes sync'ing the processors into a stopped state on an multi cpu system.</para></listitem>
+ <listitem><para>The API to talk to the kgdb I/O drivers</para></listitem>
+ <listitem><para>The API to make calls to the arch specific kgdb implementation</para></listitem>
+ <listitem><para>The logic to perform safe memory reads and writes to memory while using the debugger</para></listitem>
+ <listitem><para>A full implementation for software breakpoints unless overridden by the arch</para></listitem>
+ </itemizedlist>
+ </para>
+ </listitem>
+ <listitem><para>kgdb arch specific implementation</para>
+ <para>
+ This implementation is generally found in arch/*/kernel/kgdb.c.
+ As an example, arch/x86/kernel/kgdb.c contains the specifics to
+ implement HW breakpoint as well as the initialization to
+ dynamically register and unregister for the trap handlers on
+ this architecture. The arch specific portion implements:
+ <itemizedlist>
+ <listitem><para>contains an arch specific trap catcher which
+ invokes kgdb_handle_exception() to start kgdb about doing its
+ work</para></listitem>
+ <listitem><para>translation to and from gdb specific packet format to pt_regs</para></listitem>
+ <listitem><para>Registration and unregistration of architecture specific trap hooks</para></listitem>
+ <listitem><para>Any special exception handling and cleanup</para></listitem>
+ <listitem><para>NMI exception handling and cleanup</para></listitem>
+ <listitem><para>(optional)HW breakpoints</para></listitem>
+ </itemizedlist>
+ </para>
+ </listitem>
+ <listitem><para>kgdb I/O driver</para>
+ <para>
+ Each kgdb I/O driver has to provide an implemenation for the following:
+ <itemizedlist>
+ <listitem><para>configuration via builtin or module</para></listitem>
+ <listitem><para>dynamic configuration and kgdb hook registration calls</para></listitem>
+ <listitem><para>read and write character interface</para></listitem>
+ <listitem><para>A cleanup handler for unconfiguring from the kgdb core</para></listitem>
+ <listitem><para>(optional) Early debug methodology</para></listitem>
+ </itemizedlist>
+ Any given kgdb I/O driver has to operate very closely with the
+ hardware and must do it in such a way that does not enable
+ interrupts or change other parts of the system context without
+ completely restoring them. The kgdb core will repeatedly "poll"
+ a kgdb I/O driver for characters when it needs input. The I/O
+ driver is expected to return immediately if there is no data
+ available. Doing so allows for the future possibility to touch
+ watch dog hardware in such a way as to have a target system not
+ reset when these are enabled.
+ </para>
+ </listitem>
+ </orderedlist>
+ </para>
+ <para>
+ If you are intent on adding kgdb architecture specific support
+ for a new architecture, the architecture should define
+ <constant>HAVE_ARCH_KGDB</constant> in the architecture specific
+ Kconfig file. This will enable kgdb for the architecture, and
+ at that point you must create an architecture specific kgdb
+ implementation.
+ </para>
+ <para>
+ There are a few flags which must be set on every architecture in
+ their <asm/kgdb.h> file. These are:
+ <itemizedlist>
+ <listitem>
+ <para>
+ NUMREGBYTES: The size in bytes of all of the registers, so
+ that we can ensure they will all fit into a packet.
+ </para>
+ <para>
+ BUFMAX: The size in bytes of the buffer GDB will read into.
+ This must be larger than NUMREGBYTES.
+ </para>
+ <para>
+ CACHE_FLUSH_IS_SAFE: Set to 1 if it is always safe to call
+ flush_cache_range or flush_icache_range. On some architectures,
+ these functions may not be safe to call on SMP since we keep other
+ CPUs in a holding pattern.
+ </para>
+ </listitem>
+ </itemizedlist>
+ </para>
+ <para>
+ There are also the following functions for the common backend,
+ found in kernel/kgdb.c, that must be supplied by the
+ architecture-specific backend unless marked as (optional), in
+ which case a default function maybe used if the architecture
+ does not need to provide a specific implementation.
+ </para>
+!Iinclude/linux/kgdb.h
+ </sect1>
+ <sect1 id="kgdbocDesign">
+ <title>kgdboc internals</title>
+ <para>
+ The kgdboc driver is actually a very thin driver that relies on the
+ underlying low level to the hardware driver having "polling hooks"
+ which the to which the tty driver is attached. In the initial
+ implementation of kgdboc it the serial_core was changed to expose a
+ low level uart hook for doing polled mode reading and writing of a
+ single character while in an atomic context. When kgdb makes an I/O
+ request to the debugger, kgdboc invokes a call back in the serial
+ core which in turn uses the call back in the uart driver. It is
+ certainly possible to extend kgdboc to work with non-uart based
+ consoles in the future.
+ </para>
+ <para>
+ When using kgdboc with a uart, the uart driver must implement two callbacks in the <constant>struct uart_ops</constant>. Example from drivers/8250.c:<programlisting>
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = serial8250_get_poll_char,
+ .poll_put_char = serial8250_put_poll_char,
+#endif
+ </programlisting>
+ Any implementation specifics around creating a polling driver use the
+ <constant>#ifdef CONFIG_CONSOLE_POLL</constant>, as shown above.
+ Keep in mind that polling hooks have to be implemented in such a way
+ that they can be called from an atomic context and have to restore
+ the state of the uart chip on return such that the system can return
+ to normal when the debugger detaches. You need to be very careful
+ with any kind of lock you consider, because failing here is most
+ going to mean pressing the reset button.
+ </para>
+ </sect1>
+ </chapter>
+ <chapter id="credits">
+ <title>Credits</title>
+ <para>
+ The following people have contributed to this document:
+ <orderedlist>
+ <listitem><para>Amit Kale<email>amitkale@linsyssoft.com</email></para></listitem>
+ <listitem><para>Tom Rini<email>trini@kernel.crashing.org</email></para></listitem>
+ </orderedlist>
+ In March 2008 this document was completely rewritten by:
+ <itemizedlist>
+ <listitem><para>Jason Wessel<email>jason.wessel@windriver.com</email></para></listitem>
+ </itemizedlist>
+ </para>
+ </chapter>
+</book>
+
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 08a1ed1..1fc4e71 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -328,7 +328,7 @@
point out some special detail about the sign-off.
-13) When to use Acked-by:
+13) When to use Acked-by: and Cc:
The Signed-off-by: tag indicates that the signer was involved in the
development of the patch, or that he/she was in the patch's delivery path.
@@ -349,11 +349,59 @@
For example, if a patch affects multiple subsystems and has an Acked-by: from
one subsystem maintainer then this usually indicates acknowledgement of just
the part which affects that maintainer's code. Judgement should be used here.
- When in doubt people should refer to the original discussion in the mailing
+When in doubt people should refer to the original discussion in the mailing
list archives.
+If a person has had the opportunity to comment on a patch, but has not
+provided such comments, you may optionally add a "Cc:" tag to the patch.
+This is the only tag which might be added without an explicit action by the
+person it names. This tag documents that potentially interested parties
+have been included in the discussion
-14) The canonical patch format
+
+14) Using Test-by: and Reviewed-by:
+
+A Tested-by: tag indicates that the patch has been successfully tested (in
+some environment) by the person named. This tag informs maintainers that
+some testing has been performed, provides a means to locate testers for
+future patches, and ensures credit for the testers.
+
+Reviewed-by:, instead, indicates that the patch has been reviewed and found
+acceptable according to the Reviewer's Statement:
+
+ Reviewer's statement of oversight
+
+ By offering my Reviewed-by: tag, I state that:
+
+ (a) I have carried out a technical review of this patch to
+ evaluate its appropriateness and readiness for inclusion into
+ the mainline kernel.
+
+ (b) Any problems, concerns, or questions relating to the patch
+ have been communicated back to the submitter. I am satisfied
+ with the submitter's response to my comments.
+
+ (c) While there may be things that could be improved with this
+ submission, I believe that it is, at this time, (1) a
+ worthwhile modification to the kernel, and (2) free of known
+ issues which would argue against its inclusion.
+
+ (d) While I have reviewed the patch and believe it to be sound, I
+ do not (unless explicitly stated elsewhere) make any
+ warranties or guarantees that it will achieve its stated
+ purpose or function properly in any given situation.
+
+A Reviewed-by tag is a statement of opinion that the patch is an
+appropriate modification of the kernel without any remaining serious
+technical issues. Any interested reviewer (who has done the work) can
+offer a Reviewed-by tag for a patch. This tag serves to give credit to
+reviewers and to inform maintainers of the degree of review which has been
+done on the patch. Reviewed-by: tags, when supplied by reviewers known to
+understand the subject area and to perform thorough reviews, will normally
+increase the liklihood of your patch getting into the kernel.
+
+
+15) The canonical patch format
The canonical patch subject line is:
@@ -512,7 +560,7 @@
limitations, and under gcc they are as cheap as macros.
Macros should only be used for cases where a static inline is clearly
-suboptimal [there a few, isolated cases of this in fast paths],
+suboptimal [there are a few, isolated cases of this in fast paths],
or where it is impossible to use a static inline function [such as
string-izing].
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index bf0e3df..164c893 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -212,7 +212,7 @@
---------------------------
What: i386/x86_64 bzImage symlinks
-When: April 2008
+When: April 2010
Why: The i386/x86_64 merge provides a symlink to the old bzImage
location so not yet updated user space tools, e.g. package
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index e68021c..52cd611 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -66,6 +66,8 @@
- info on the Linux implementation of Sys V mandatory file locking.
ncpfs.txt
- info on Novell Netware(tm) filesystem using NCP protocol.
+nfsroot.txt
+ - short guide on setting up a diskless box with NFS root filesystem.
ntfs.txt
- info and mount options for the NTFS filesystem (Windows NT).
ocfs2.txt
@@ -82,6 +84,10 @@
- info on relay, for efficient streaming from kernel to user space.
romfs.txt
- description of the ROMFS filesystem.
+rpc-cache.txt
+ - introduction to the caching mechanisms in the sunrpc layer.
+seq_file.txt
+ - how to use the seq_file API
sharedsubtree.txt
- a description of shared subtrees for namespaces.
smbfs.txt
diff --git a/Documentation/nfsroot.txt b/Documentation/filesystems/nfsroot.txt
similarity index 100%
rename from Documentation/nfsroot.txt
rename to Documentation/filesystems/nfsroot.txt
diff --git a/Documentation/rpc-cache.txt b/Documentation/filesystems/rpc-cache.txt
similarity index 100%
rename from Documentation/rpc-cache.txt
rename to Documentation/filesystems/rpc-cache.txt
diff --git a/Documentation/filesystems/seq_file.txt b/Documentation/filesystems/seq_file.txt
new file mode 100644
index 0000000..7fb8e6d
--- /dev/null
+++ b/Documentation/filesystems/seq_file.txt
@@ -0,0 +1,283 @@
+The seq_file interface
+
+ Copyright 2003 Jonathan Corbet <corbet@lwn.net>
+ This file is originally from the LWN.net Driver Porting series at
+ http://lwn.net/Articles/driver-porting/
+
+
+There are numerous ways for a device driver (or other kernel component) to
+provide information to the user or system administrator. One useful
+technique is the creation of virtual files, in debugfs, /proc or elsewhere.
+Virtual files can provide human-readable output that is easy to get at
+without any special utility programs; they can also make life easier for
+script writers. It is not surprising that the use of virtual files has
+grown over the years.
+
+Creating those files correctly has always been a bit of a challenge,
+however. It is not that hard to make a virtual file which returns a
+string. But life gets trickier if the output is long - anything greater
+than an application is likely to read in a single operation. Handling
+multiple reads (and seeks) requires careful attention to the reader's
+position within the virtual file - that position is, likely as not, in the
+middle of a line of output. The kernel has traditionally had a number of
+implementations that got this wrong.
+
+The 2.6 kernel contains a set of functions (implemented by Alexander Viro)
+which are designed to make it easy for virtual file creators to get it
+right.
+
+The seq_file interface is available via <linux/seq_file.h>. There are
+three aspects to seq_file:
+
+ * An iterator interface which lets a virtual file implementation
+ step through the objects it is presenting.
+
+ * Some utility functions for formatting objects for output without
+ needing to worry about things like output buffers.
+
+ * A set of canned file_operations which implement most operations on
+ the virtual file.
+
+We'll look at the seq_file interface via an extremely simple example: a
+loadable module which creates a file called /proc/sequence. The file, when
+read, simply produces a set of increasing integer values, one per line. The
+sequence will continue until the user loses patience and finds something
+better to do. The file is seekable, in that one can do something like the
+following:
+
+ dd if=/proc/sequence of=out1 count=1
+ dd if=/proc/sequence skip=1 out=out2 count=1
+
+Then concatenate the output files out1 and out2 and get the right
+result. Yes, it is a thoroughly useless module, but the point is to show
+how the mechanism works without getting lost in other details. (Those
+wanting to see the full source for this module can find it at
+http://lwn.net/Articles/22359/).
+
+
+The iterator interface
+
+Modules implementing a virtual file with seq_file must implement a simple
+iterator object that allows stepping through the data of interest.
+Iterators must be able to move to a specific position - like the file they
+implement - but the interpretation of that position is up to the iterator
+itself. A seq_file implementation that is formatting firewall rules, for
+example, could interpret position N as the Nth rule in the chain.
+Positioning can thus be done in whatever way makes the most sense for the
+generator of the data, which need not be aware of how a position translates
+to an offset in the virtual file. The one obvious exception is that a
+position of zero should indicate the beginning of the file.
+
+The /proc/sequence iterator just uses the count of the next number it
+will output as its position.
+
+Four functions must be implemented to make the iterator work. The first,
+called start() takes a position as an argument and returns an iterator
+which will start reading at that position. For our simple sequence example,
+the start() function looks like:
+
+ static void *ct_seq_start(struct seq_file *s, loff_t *pos)
+ {
+ loff_t *spos = kmalloc(sizeof(loff_t), GFP_KERNEL);
+ if (! spos)
+ return NULL;
+ *spos = *pos;
+ return spos;
+ }
+
+The entire data structure for this iterator is a single loff_t value
+holding the current position. There is no upper bound for the sequence
+iterator, but that will not be the case for most other seq_file
+implementations; in most cases the start() function should check for a
+"past end of file" condition and return NULL if need be.
+
+For more complicated applications, the private field of the seq_file
+structure can be used. There is also a special value which can be returned
+by the start() function called SEQ_START_TOKEN; it can be used if you wish
+to instruct your show() function (described below) to print a header at the
+top of the output. SEQ_START_TOKEN should only be used if the offset is
+zero, however.
+
+The next function to implement is called, amazingly, next(); its job is to
+move the iterator forward to the next position in the sequence. The
+example module can simply increment the position by one; more useful
+modules will do what is needed to step through some data structure. The
+next() function returns a new iterator, or NULL if the sequence is
+complete. Here's the example version:
+
+ static void *ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
+ {
+ loff_t *spos = v;
+ *pos = ++*spos;
+ return spos;
+ }
+
+The stop() function is called when iteration is complete; its job, of
+course, is to clean up. If dynamic memory is allocated for the iterator,
+stop() is the place to free it.
+
+ static void ct_seq_stop(struct seq_file *s, void *v)
+ {
+ kfree(v);
+ }
+
+Finally, the show() function should format the object currently pointed to
+by the iterator for output. It should return zero, or an error code if
+something goes wrong. The example module's show() function is:
+
+ static int ct_seq_show(struct seq_file *s, void *v)
+ {
+ loff_t *spos = v;
+ seq_printf(s, "%lld\n", (long long)*spos);
+ return 0;
+ }
+
+We will look at seq_printf() in a moment. But first, the definition of the
+seq_file iterator is finished by creating a seq_operations structure with
+the four functions we have just defined:
+
+ static const struct seq_operations ct_seq_ops = {
+ .start = ct_seq_start,
+ .next = ct_seq_next,
+ .stop = ct_seq_stop,
+ .show = ct_seq_show
+ };
+
+This structure will be needed to tie our iterator to the /proc file in
+a little bit.
+
+It's worth noting that the iterator value returned by start() and
+manipulated by the other functions is considered to be completely opaque by
+the seq_file code. It can thus be anything that is useful in stepping
+through the data to be output. Counters can be useful, but it could also be
+a direct pointer into an array or linked list. Anything goes, as long as
+the programmer is aware that things can happen between calls to the
+iterator function. However, the seq_file code (by design) will not sleep
+between the calls to start() and stop(), so holding a lock during that time
+is a reasonable thing to do. The seq_file code will also avoid taking any
+other locks while the iterator is active.
+
+
+Formatted output
+
+The seq_file code manages positioning within the output created by the
+iterator and getting it into the user's buffer. But, for that to work, that
+output must be passed to the seq_file code. Some utility functions have
+been defined which make this task easy.
+
+Most code will simply use seq_printf(), which works pretty much like
+printk(), but which requires the seq_file pointer as an argument. It is
+common to ignore the return value from seq_printf(), but a function
+producing complicated output may want to check that value and quit if
+something non-zero is returned; an error return means that the seq_file
+buffer has been filled and further output will be discarded.
+
+For straight character output, the following functions may be used:
+
+ int seq_putc(struct seq_file *m, char c);
+ int seq_puts(struct seq_file *m, const char *s);
+ int seq_escape(struct seq_file *m, const char *s, const char *esc);
+
+The first two output a single character and a string, just like one would
+expect. seq_escape() is like seq_puts(), except that any character in s
+which is in the string esc will be represented in octal form in the output.
+
+There is also a function for printing filenames:
+
+ int seq_path(struct seq_file *m, struct path *path, char *esc);
+
+Here, path indicates the file of interest, and esc is a set of characters
+which should be escaped in the output.
+
+
+Making it all work
+
+So far, we have a nice set of functions which can produce output within the
+seq_file system, but we have not yet turned them into a file that a user
+can see. Creating a file within the kernel requires, of course, the
+creation of a set of file_operations which implement the operations on that
+file. The seq_file interface provides a set of canned operations which do
+most of the work. The virtual file author still must implement the open()
+method, however, to hook everything up. The open function is often a single
+line, as in the example module:
+
+ static int ct_open(struct inode *inode, struct file *file)
+ {
+ return seq_open(file, &ct_seq_ops);
+ }
+
+Here, the call to seq_open() takes the seq_operations structure we created
+before, and gets set up to iterate through the virtual file.
+
+On a successful open, seq_open() stores the struct seq_file pointer in
+file->private_data. If you have an application where the same iterator can
+be used for more than one file, you can store an arbitrary pointer in the
+private field of the seq_file structure; that value can then be retrieved
+by the iterator functions.
+
+The other operations of interest - read(), llseek(), and release() - are
+all implemented by the seq_file code itself. So a virtual file's
+file_operations structure will look like:
+
+ static const struct file_operations ct_file_ops = {
+ .owner = THIS_MODULE,
+ .open = ct_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release
+ };
+
+There is also a seq_release_private() which passes the contents of the
+seq_file private field to kfree() before releasing the structure.
+
+The final step is the creation of the /proc file itself. In the example
+code, that is done in the initialization code in the usual way:
+
+ static int ct_init(void)
+ {
+ struct proc_dir_entry *entry;
+
+ entry = create_proc_entry("sequence", 0, NULL);
+ if (entry)
+ entry->proc_fops = &ct_file_ops;
+ return 0;
+ }
+
+ module_init(ct_init);
+
+And that is pretty much it.
+
+
+seq_list
+
+If your file will be iterating through a linked list, you may find these
+routines useful:
+
+ struct list_head *seq_list_start(struct list_head *head,
+ loff_t pos);
+ struct list_head *seq_list_start_head(struct list_head *head,
+ loff_t pos);
+ struct list_head *seq_list_next(void *v, struct list_head *head,
+ loff_t *ppos);
+
+These helpers will interpret pos as a position within the list and iterate
+accordingly. Your start() and next() functions need only invoke the
+seq_list_* helpers with a pointer to the appropriate list_head structure.
+
+
+The extra-simple version
+
+For extremely simple virtual files, there is an even easier interface. A
+module can define only the show() function, which should create all the
+output that the virtual file will contain. The file's open() method then
+calls:
+
+ int single_open(struct file *file,
+ int (*show)(struct seq_file *m, void *p),
+ void *data);
+
+When output time comes, the show() function will be called once. The data
+value given to single_open() can be found in the private field of the
+seq_file structure. When using single_open(), the programmer should use
+single_release() instead of seq_release() in the file_operations structure
+to avoid a memory leak.
diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt
index 74aeb14..0a1668b 100644
--- a/Documentation/filesystems/xfs.txt
+++ b/Documentation/filesystems/xfs.txt
@@ -52,16 +52,15 @@
and also gets the setgid bit set if it is a directory itself.
ihashsize=value
- Sets the number of hash buckets available for hashing the
- in-memory inodes of the specified mount point. If a value
- of zero is used, the value selected by the default algorithm
- will be displayed in /proc/mounts.
+ In memory inode hashes have been removed, so this option has
+ no function as of August 2007. Option is deprecated.
ikeep/noikeep
- When inode clusters are emptied of inodes, keep them around
- on the disk (ikeep) - this is the traditional XFS behaviour
- and is still the default for now. Using the noikeep option,
- inode clusters are returned to the free space pool.
+ When ikeep is specified, XFS does not delete empty inode clusters
+ and keeps them around on disk. ikeep is the traditional XFS
+ behaviour. When noikeep is specified, empty inode clusters
+ are returned to the free space pool. The default is noikeep for
+ non-DMAPI mounts, while ikeep is the default when DMAPI is in use.
inode64
Indicates that XFS is allowed to create inodes at any location
diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt
index fc49b79..2eb1610 100644
--- a/Documentation/i386/boot.txt
+++ b/Documentation/i386/boot.txt
@@ -170,6 +170,8 @@
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data
+0248/4 2.08+ payload_offset Offset of kernel payload
+024C/4 2.08+ payload_length Length of kernel payload
(1) For backwards compatibility, if the setup_sects field contains 0, the
real value is 4.
@@ -512,6 +514,32 @@
A pointer to data that is specific to hardware subarch
+Field name: payload_offset
+Type: read
+Offset/size: 0x248/4
+Protocol: 2.08+
+
+ If non-zero then this field contains the offset from the end of the
+ real-mode code to the payload.
+
+ The payload may be compressed. The format of both the compressed and
+ uncompressed data should be determined using the standard magic
+ numbers. Currently only gzip compressed ELF is used.
+
+Field name: payload_length
+Type: read
+Offset/size: 0x24c/4
+Protocol: 2.08+
+
+ The length of the payload.
+
+**** THE IMAGE CHECKSUM
+
+From boot protocol version 2.08 onwards the CRC-32 is calculated over
+the entire file using the characteristic polynomial 0x04C11DB7 and an
+initial remainder of 0xffffffff. The checksum is appended to the
+file; therefore the CRC of the file up to the limit specified in the
+syssize field of the header is always 0.
**** THE KERNEL COMMAND LINE
diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt
index 818676a..486c699 100644
--- a/Documentation/ide/ide.txt
+++ b/Documentation/ide/ide.txt
@@ -71,29 +71,6 @@
ones), for the drives/geometries attached to those interfaces, and for the IRQ
lines being used by the interfaces (normally 14, 15 for ide0/ide1).
-For special cases, interfaces may be specified using kernel "command line"
-options. For example,
-
- ide3=0x168,0x36e,10 /* ioports 0x168-0x16f,0x36e, irq 10 */
-
-Normally the irq number need not be specified, as ide.c will probe for it:
-
- ide3=0x168,0x36e /* ioports 0x168-0x16f,0x36e */
-
-The standard port, and irq values are these:
-
- ide0=0x1f0,0x3f6,14
- ide1=0x170,0x376,15
- ide2=0x1e8,0x3ee,11
- ide3=0x168,0x36e,10
-
-Note that the first parameter reserves 8 contiguous ioports, whereas the
-second value denotes a single ioport. If in doubt, do a 'cat /proc/ioports'.
-
-In all probability the device uses these ports and IRQs if it is attached
-to the appropriate ide channel. Pass the parameter for the correct ide
-channel to the kernel, as explained above.
-
Any number of interfaces may share a single IRQ if necessary, at a slight
performance penalty, whether on separate cards or a single VLB card.
The IDE driver automatically detects and handles this. However, this may
@@ -184,13 +161,6 @@
Please pass on any feedback on any of this stuff to the maintainer,
whose address can be found in linux/MAINTAINERS.
-Note that if BOTH hd.c and ide.c are configured into the kernel,
-hd.c will normally be allowed to control the primary IDE interface.
-This is useful for older hardware that may be incompatible with ide.c,
-and still allows newer hardware to run on the 2nd/3rd/4th IDE ports
-under control of ide.c. To have ide.c also "take over" the primary
-IDE port in this situation, use the "command line" parameter: ide0=0x1f0
-
The IDE driver is modularized. The high level disk/CD-ROM/tape/floppy
drivers can always be compiled as loadable modules, the chipset drivers
can only be compiled into the kernel, and the core code (ide.c) can be
@@ -206,7 +176,7 @@
driver using the "options=" keyword to insmod, while replacing any ',' with
';'. For example:
- insmod ide.o options="ide0=serialize ide1=serialize ide2=0x1e8;0x3ee;11"
+ insmod ide.o options="hda=nodma hdb=nodma"
================================================================================
@@ -247,21 +217,11 @@
As for VLB, it is safest to not specify it.
Bigger values are safer than smaller ones.
- "idex=base" : probe for an interface at the addr specified,
- where "base" is usually 0x1f0 or 0x170
- and "ctl" is assumed to be "base"+0x206
-
- "idex=base,ctl" : specify both base and ctl
-
- "idex=base,ctl,irq" : specify base, ctl, and irq number
-
"idex=serialize" : do not overlap operations on idex. Please note
that you will have to specify this option for
both the respective primary and secondary channel
to take effect.
- "idex=four" : four drives on idex and ide(x^1) share same ports
-
"idex=reset" : reset interface after probe
"idex=ata66" : informs the interface that it has an 80c cable
@@ -269,8 +229,6 @@
ability to bit test for detection is currently
unknown.
- "ide=reverse" : formerly called to pci sub-system, but now local.
-
"ide=doubler" : probe/support IDE doublers on Amiga
There may be more options than shown -- use the source, Luke!
@@ -290,6 +248,9 @@
kernel paremeter to enable probing for VLB version of the chipset (PCI ones
are detected automatically).
+You also need to use "probe" kernel parameter for ide-4drives driver
+(support for IDE generic chipset with four drives on one port).
+
================================================================================
Some Terminology
diff --git a/Documentation/ide/warm-plug-howto.txt b/Documentation/ide/warm-plug-howto.txt
new file mode 100644
index 0000000..d588546
--- /dev/null
+++ b/Documentation/ide/warm-plug-howto.txt
@@ -0,0 +1,13 @@
+
+IDE warm-plug HOWTO
+===================
+
+To warm-plug devices on a port 'idex':
+
+# echo -n "1" > /sys/class/ide_port/idex/delete_devices
+
+unplug old device(s) and plug new device(s)
+
+# echo -n "1" > /sys/class/ide_port/idex/scan
+
+done
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 508e2a2..256a216 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -170,11 +170,6 @@
acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
Format: <irq>,<irq>...
- acpi_new_pts_ordering [HW,ACPI]
- Enforce the ACPI 2.0 ordering of the _PTS control
- method wrt putting devices into low power states
- default: pre ACPI 2.0 ordering of _PTS
-
acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT
acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
@@ -380,6 +375,10 @@
ccw_timeout_log [S390]
See Documentation/s390/CommonIO for details.
+ cgroup_disable= [KNL] Disable a particular controller
+ Format: {name of the controller(s) to disable}
+ {Currently supported controllers - "memory"}
+
checkreqprot [SELINUX] Set initial checkreqprot flag value.
Format: { "0" | "1" }
See security/selinux/Kconfig help text.
@@ -764,11 +763,11 @@
Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
ide= [HW] (E)IDE subsystem
- Format: ide=nodma or ide=doubler or ide=reverse
+ Format: ide=nodma or ide=doubler
See Documentation/ide/ide.txt.
ide?= [HW] (E)IDE subsystem
- Format: ide?=noprobe or chipset specific parameters.
+ Format: ide?=ata66 or chipset specific parameters.
See Documentation/ide/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
@@ -813,6 +812,19 @@
inttest= [IA64]
+ iommu= [x86]
+ off
+ force
+ noforce
+ biomerge
+ panic
+ nopanic
+ merge
+ nomerge
+ forcesac
+ soft
+
+
intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option
off
Disable intel iommu driver.
@@ -845,7 +857,7 @@
arch/alpha/kernel/core_marvel.c.
ip= [IP_PNP]
- See Documentation/nfsroot.txt.
+ See Documentation/filesystems/nfsroot.txt.
ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
See comment before ip2_setup() in
@@ -929,6 +941,11 @@
kstack=N [X86-32,X86-64] Print N words from the kernel stack
in oops dumps.
+ kgdboc= [HW] kgdb over consoles.
+ Requires a tty driver that supports console polling.
+ (only serial suported for now)
+ Format: <serial_device>[,baud]
+
l2cr= [PPC]
lapic [X86-32,APIC] Enable the local APIC even if BIOS
@@ -1135,6 +1152,11 @@
or
memmap=0x10000$0x18690000
+ memtest= [KNL,X86_64] Enable memtest
+ Format: <integer>
+ range: 0,4 : pattern number
+ default : 0 <disable>
+
meye.*= [HW] Set MotionEye Camera parameters
See Documentation/video4linux/meye.txt.
@@ -1199,10 +1221,10 @@
file if at all.
nfsaddrs= [NFS]
- See Documentation/nfsroot.txt.
+ See Documentation/filesystems/nfsroot.txt.
nfsroot= [NFS] nfs root filesystem for disk-less boxes.
- See Documentation/nfsroot.txt.
+ See Documentation/filesystems/nfsroot.txt.
nfs.callback_tcpport=
[NFS] set the TCP port on which the NFSv4 callback
@@ -1340,6 +1362,10 @@
nowb [ARM]
+ nptcg= [IA64] Override max number of concurrent global TLB
+ purges which is reported from either PAL_VM_SUMMARY or
+ SAL PALO.
+
numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
one of ['zone', 'node', 'default'] can be specified
This can be set from sysctl after boot.
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 02e56d4..c485ee0 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -84,9 +84,6 @@
- IP policy-based routing
ray_cs.txt
- Raylink Wireless LAN card driver info.
-sk98lin.txt
- - Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
- Ethernet Adapter family driver info
skfp.txt
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
smc9.txt
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index f1b2de1..641d2af 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -281,10 +281,10 @@
sa_family_t can_family;
int can_ifindex;
union {
- struct { canid_t rx_id, tx_id; } tp16;
- struct { canid_t rx_id, tx_id; } tp20;
- struct { canid_t rx_id, tx_id; } mcnet;
- struct { canid_t rx_id, tx_id; } isotp;
+ /* transport protocol class address info (e.g. ISOTP) */
+ struct { canid_t rx_id, tx_id; } tp;
+
+ /* reserved for future CAN protocols address information */
} can_addr;
};
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
deleted file mode 100644
index 8590a95..0000000
--- a/Documentation/networking/sk98lin.txt
+++ /dev/null
@@ -1,568 +0,0 @@
-(C)Copyright 1999-2004 Marvell(R).
-All rights reserved
-===========================================================================
-
-sk98lin.txt created 13-Feb-2004
-
-Readme File for sk98lin v6.23
-Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX
-
-This file contains
- 1 Overview
- 2 Required Files
- 3 Installation
- 3.1 Driver Installation
- 3.2 Inclusion of adapter at system start
- 4 Driver Parameters
- 4.1 Per-Port Parameters
- 4.2 Adapter Parameters
- 5 Large Frame Support
- 6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
- 7 Troubleshooting
-
-===========================================================================
-
-
-1 Overview
-===========
-
-The sk98lin driver supports the Marvell Yukon and SysKonnect
-SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has
-been tested with Linux on Intel/x86 machines.
-***
-
-
-2 Required Files
-=================
-
-The linux kernel source.
-No additional files required.
-***
-
-
-3 Installation
-===============
-
-It is recommended to download the latest version of the driver from the
-SysKonnect web site www.syskonnect.com. If you have downloaded the latest
-driver, the Linux kernel has to be patched before the driver can be
-installed. For details on how to patch a Linux kernel, refer to the
-patch.txt file.
-
-3.1 Driver Installation
-------------------------
-
-The following steps describe the actions that are required to install
-the driver and to start it manually. These steps should be carried
-out for the initial driver setup. Once confirmed to be ok, they can
-be included in the system start.
-
-NOTE 1: To perform the following tasks you need 'root' access.
-
-NOTE 2: In case of problems, please read the section "Troubleshooting"
- below.
-
-The driver can either be integrated into the kernel or it can be compiled
-as a module. Select the appropriate option during the kernel
-configuration.
-
-Compile/use the driver as a module
-----------------------------------
-To compile the driver, go to the directory /usr/src/linux and
-execute the command "make menuconfig" or "make xconfig" and proceed as
-follows:
-
-To integrate the driver permanently into the kernel, proceed as follows:
-
-1. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support"
- with (*)
-3. Build a new kernel when the configuration of the above options is
- finished.
-4. Install the new kernel.
-5. Reboot your system.
-
-To use the driver as a module, proceed as follows:
-
-1. Enable 'loadable module support' in the kernel.
-2. For automatic driver start, enable the 'Kernel module loader'.
-3. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support"
- with (M)
-5. Execute the command "make modules".
-6. Execute the command "make modules_install".
- The appropriate modules will be installed.
-7. Reboot your system.
-
-
-Load the module manually
-------------------------
-To load the module manually, proceed as follows:
-
-1. Enter "modprobe sk98lin".
-2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in
- your computer and you have a /proc file system, execute the command:
- "ls /proc/net/sk98lin/"
- This should produce an output containing a line with the following
- format:
- eth0 eth1 ...
- which indicates that your adapter has been found and initialized.
-
- NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx
- adapter installed, the adapters will be listed as 'eth0',
- 'eth1', 'eth2', etc.
- For each adapter, repeat steps 3 and 4 below.
-
- NOTE 2: If you have other Ethernet adapters installed, your Marvell
- Yukon or SysKonnect SK-98xx adapter will be mapped to the
- next available number, e.g. 'eth1'. The mapping is executed
- automatically.
- The module installation message (displayed either in a system
- log file or on the console) prints a line for each adapter
- found containing the corresponding 'ethX'.
-
-3. Select an IP address and assign it to the respective adapter by
- entering:
- ifconfig eth0 <ip-address>
- With this command, the adapter is connected to the Ethernet.
-
- SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter
- is now active, the link status LED of the primary port is active and
- the link status LED of the secondary port (on dual port adapters) is
- blinking (if the ports are connected to a switch or hub).
- SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active.
- In addition, you will receive a status message on the console stating
- "ethX: network connection up using port Y" and showing the selected
- connection parameters (x stands for the ethernet device number
- (0,1,2, etc), y stands for the port name (A or B)).
-
- NOTE: If you are in doubt about IP addresses, ask your network
- administrator for assistance.
-
-4. Your adapter should now be fully operational.
- Use 'ping <otherstation>' to verify the connection to other computers
- on your network.
-5. To check the adapter configuration view /proc/net/sk98lin/[devicename].
- For example by executing:
- "cat /proc/net/sk98lin/eth0"
-
-Unload the module
------------------
-To stop and unload the driver modules, proceed as follows:
-
-1. Execute the command "ifconfig eth0 down".
-2. Execute the command "rmmod sk98lin".
-
-3.2 Inclusion of adapter at system start
------------------------------------------
-
-Since a large number of different Linux distributions are
-available, we are unable to describe a general installation procedure
-for the driver module.
-Because the driver is now integrated in the kernel, installation should
-be easy, using the standard mechanism of your distribution.
-Refer to the distribution's manual for installation of ethernet adapters.
-
-***
-
-4 Driver Parameters
-====================
-
-Parameters can be set at the command line after the module has been
-loaded with the command 'modprobe'.
-In some distributions, the configuration tools are able to pass parameters
-to the driver module.
-
-If you use the kernel module loader, you can set driver parameters
-in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier).
-To set the driver parameters in this file, proceed as follows:
-
-1. Insert a line of the form :
- options sk98lin ...
- For "...", the same syntax is required as described for the command
- line parameters of modprobe below.
-2. To activate the new parameters, either reboot your computer
- or
- unload and reload the driver.
- The syntax of the driver parameters is:
-
- modprobe sk98lin parameter=value1[,value2[,value3...]]
-
- where value1 refers to the first adapter, value2 to the second etc.
-
-NOTE: All parameters are case sensitive. Write them exactly as shown
- below.
-
-Example:
-Suppose you have two adapters. You want to set auto-negotiation
-on the first adapter to ON and on the second adapter to OFF.
-You also want to set DuplexCapabilities on the first adapter
-to FULL, and on the second adapter to HALF.
-Then, you must enter:
-
- modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half
-
-NOTE: The number of adapters that can be configured this way is
- limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM).
- The current limit is 16. If you happen to install
- more adapters, adjust this and recompile.
-
-
-4.1 Per-Port Parameters
-------------------------
-
-These settings are available for each port on the adapter.
-In the following description, '?' stands for the port for
-which you set the parameter (A or B).
-
-Speed
------
-Parameter: Speed_?
-Values: 10, 100, 1000, Auto
-Default: Auto
-
-This parameter is used to set the speed capabilities. It is only valid
-for the SK-98xx V2.0 copper adapters.
-Usually, the speed is negotiated between the two ports during link
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-Auto-Negotiation
-----------------
-Parameter: AutoNeg_?
-Values: On, Off, Sense
-Default: On
-
-The "Sense"-mode automatically detects whether the link partner supports
-auto-negotiation or not.
-
-Duplex Capabilities
--------------------
-Parameter: DupCap_?
-Values: Half, Full, Both
-Default: Both
-
-This parameters is only relevant if auto-negotiation for this port is
-not set to "Sense". If auto-negotiation is set to "On", all three values
-are possible. If it is set to "Off", only "Full" and "Half" are allowed.
-This parameter is useful if your link partner does not support all
-possible combinations.
-
-Flow Control
-------------
-Parameter: FlowCtrl_?
-Values: Sym, SymOrRem, LocSend, None
-Default: SymOrRem
-
-This parameter can be used to set the flow control capabilities the
-port reports during auto-negotiation. It can be set for each port
-individually.
-Possible modes:
- -- Sym = Symmetric: both link partners are allowed to send
- PAUSE frames
- -- SymOrRem = SymmetricOrRemote: both or only remote partner
- are allowed to send PAUSE frames
- -- LocSend = LocalSend: only local link partner is allowed
- to send PAUSE frames
- -- None = no link partner is allowed to send PAUSE frames
-
-NOTE: This parameter is ignored if auto-negotiation is set to "Off".
-
-Role in Master-Slave-Negotiation (1000Base-T only)
---------------------------------------------------
-Parameter: Role_?
-Values: Auto, Master, Slave
-Default: Auto
-
-This parameter is only valid for the SK-9821 and SK-9822 adapters.
-For two 1000Base-T ports to communicate, one must take the role of the
-master (providing timing information), while the other must be the
-slave. Usually, this is negotiated between the two ports during link
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-
-4.2 Adapter Parameters
------------------------
-
-Connection Type (SK-98xx V2.0 copper adapters only)
----------------
-Parameter: ConType
-Values: Auto, 100FD, 100HD, 10FD, 10HD
-Default: Auto
-
-The parameter 'ConType' is a combination of all five per-port parameters
-within one single parameter. This simplifies the configuration of both ports
-of an adapter card! The different values of this variable reflect the most
-meaningful combinations of port parameters.
-
-The following table shows the values of 'ConType' and the corresponding
-combinations of the per-port parameters:
-
- ConType | DupCap AutoNeg FlowCtrl Role Speed
- ----------+------------------------------------------------------
- Auto | Both On SymOrRem Auto Auto
- 100FD | Full Off None Auto (ignored) 100
- 100HD | Half Off None Auto (ignored) 100
- 10FD | Full Off None Auto (ignored) 10
- 10HD | Half Off None Auto (ignored) 10
-
-Stating any other port parameter together with this 'ConType' variable
-will result in a merged configuration of those settings. This due to
-the fact, that the per-port parameters (e.g. Speed_? ) have a higher
-priority than the combined variable 'ConType'.
-
-NOTE: This parameter is always used on both ports of the adapter card.
-
-Interrupt Moderation
---------------------
-Parameter: Moderation
-Values: None, Static, Dynamic
-Default: None
-
-Interrupt moderation is employed to limit the maximum number of interrupts
-the driver has to serve. That is, one or more interrupts (which indicate any
-transmit or receive packet to be processed) are queued until the driver
-processes them. When queued interrupts are to be served, is determined by the
-'IntsPerSec' parameter, which is explained later below.
-
-Possible modes:
-
- -- None - No interrupt moderation is applied on the adapter card.
- Therefore, each transmit or receive interrupt is served immediately
- as soon as it appears on the interrupt line of the adapter card.
-
- -- Static - Interrupt moderation is applied on the adapter card.
- All transmit and receive interrupts are queued until a complete
- moderation interval ends. If such a moderation interval ends, all
- queued interrupts are processed in one big bunch without any delay.
- The term 'static' reflects the fact, that interrupt moderation is
- always enabled, regardless how much network load is currently
- passing via a particular interface. In addition, the duration of
- the moderation interval has a fixed length that never changes while
- the driver is operational.
-
- -- Dynamic - Interrupt moderation might be applied on the adapter card,
- depending on the load of the system. If the driver detects that the
- system load is too high, the driver tries to shield the system against
- too much network load by enabling interrupt moderation. If - at a later
- time - the CPU utilization decreases again (or if the network load is
- negligible) the interrupt moderation will automatically be disabled.
-
-Interrupt moderation should be used when the driver has to handle one or more
-interfaces with a high network load, which - as a consequence - leads also to a
-high CPU utilization. When moderation is applied in such high network load
-situations, CPU load might be reduced by 20-30%.
-
-NOTE: The drawback of using interrupt moderation is an increase of the round-
-trip-time (RTT), due to the queueing and serving of interrupts at dedicated
-moderation times.
-
-Interrupts per second
----------------------
-Parameter: IntsPerSec
-Values: 30...40000 (interrupts per second)
-Default: 2000
-
-This parameter is only used if either static or dynamic interrupt moderation
-is used on a network adapter card. Using this parameter if no moderation is
-applied will lead to no action performed.
-
-This parameter determines the length of any interrupt moderation interval.
-Assuming that static interrupt moderation is to be used, an 'IntsPerSec'
-parameter value of 2000 will lead to an interrupt moderation interval of
-500 microseconds.
-
-NOTE: The duration of the moderation interval is to be chosen with care.
-At first glance, selecting a very long duration (e.g. only 100 interrupts per
-second) seems to be meaningful, but the increase of packet-processing delay
-is tremendous. On the other hand, selecting a very short moderation time might
-compensate the use of any moderation being applied.
-
-
-Preferred Port
---------------
-Parameter: PrefPort
-Values: A, B
-Default: A
-
-This is used to force the preferred port to A or B (on dual-port network
-adapters). The preferred port is the one that is used if both are detected
-as fully functional.
-
-RLMT Mode (Redundant Link Management Technology)
-------------------------------------------------
-Parameter: RlmtMode
-Values: CheckLinkState,CheckLocalPort, CheckSeg, DualNet
-Default: CheckLinkState
-
-RLMT monitors the status of the port. If the link of the active port
-fails, RLMT switches immediately to the standby link. The virtual link is
-maintained as long as at least one 'physical' link is up.
-
-Possible modes:
-
- -- CheckLinkState - Check link state only: RLMT uses the link state
- reported by the adapter hardware for each individual port to
- determine whether a port can be used for all network traffic or
- not.
-
- -- CheckLocalPort - In this mode, RLMT monitors the network path
- between the two ports of an adapter by regularly exchanging packets
- between them. This mode requires a network configuration in which
- the two ports are able to "see" each other (i.e. there must not be
- any router between the ports).
-
- -- CheckSeg - Check local port and segmentation: This mode supports the
- same functions as the CheckLocalPort mode and additionally checks
- network segmentation between the ports. Therefore, this mode is only
- to be used if Gigabit Ethernet switches are installed on the network
- that have been configured to use the Spanning Tree protocol.
-
- -- DualNet - In this mode, ports A and B are used as separate devices.
- If you have a dual port adapter, port A will be configured as eth0
- and port B as eth1. Both ports can be used independently with
- distinct IP addresses. The preferred port setting is not used.
- RLMT is turned off.
-
-NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations
- where a network path between the ports on one adapter exists.
- Moreover, they are not designed to work where adapters are connected
- back-to-back.
-***
-
-
-5 Large Frame Support
-======================
-
-The driver supports large frames (also called jumbo frames). Using large
-frames can result in an improved throughput if transferring large amounts
-of data.
-To enable large frames, set the MTU (maximum transfer unit) of the
-interface to the desired value (up to 9000), execute the following
-command:
- ifconfig eth0 mtu 9000
-This will only work if you have two adapters connected back-to-back
-or if you use a switch that supports large frames. When using a switch,
-it should be configured to allow large frames and auto-negotiation should
-be set to OFF. The setting must be configured on all adapters that can be
-reached by the large frames. If one adapter is not set to receive large
-frames, it will simply drop them.
-
-You can switch back to the standard ethernet frame size by executing the
-following command:
- ifconfig eth0 mtu 1500
-
-To permanently configure this setting, add a script with the 'ifconfig'
-line to the system startup sequence (named something like "S99sk98lin"
-in /etc/rc.d/rc2.d).
-***
-
-
-6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
-==================================================================
-
-The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and
-Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad.
-These features are only available after installation of open source
-modules available on the Internet:
-For VLAN go to: http://www.candelatech.com/~greear/vlan.html
-For Link Aggregation go to: http://www.st.rim.or.jp/~yumo
-
-NOTE: SysKonnect GmbH does not offer any support for these open source
- modules and does not take the responsibility for any kind of
- failures or problems arising in connection with these modules.
-
-NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may
- cause problems when unloading the driver.
-
-
-7 Troubleshooting
-==================
-
-If any problems occur during the installation process, check the
-following list:
-
-
-Problem: The SK-98xx adapter cannot be found by the driver.
-Solution: In /proc/pci search for the following entry:
- 'Ethernet controller: SysKonnect SK-98xx ...'
- If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has
- been found by the system and should be operational.
- If this entry does not exist or if the file '/proc/pci' is not
- found, there may be a hardware problem or the PCI support may
- not be enabled in your kernel.
- The adapter can be checked using the diagnostics program which
- is available on the SysKonnect web site:
- www.syskonnect.com
-
- Some COMPAQ machines have problems dealing with PCI under Linux.
- This problem is described in the 'PCI howto' document
- (included in some distributions or available from the
- web, e.g. at 'www.linux.org').
-
-
-Problem: Programs such as 'ifconfig' or 'route' cannot be found or the
- error message 'Operation not permitted' is displayed.
-Reason: You are not logged in as user 'root'.
-Solution: Logout and login as 'root' or change to 'root' via 'su'.
-
-
-Problem: Upon use of the command 'ping <address>' the message
- "ping: sendto: Network is unreachable" is displayed.
-Reason: Your route is not set correctly.
-Solution: If you are using RedHat, you probably forgot to set up the
- route in the 'network configuration'.
- Check the existing routes with the 'route' command and check
- if an entry for 'eth0' exists, and if so, if it is set correctly.
-
-
-Problem: The driver can be started, the adapter is connected to the
- network, but you cannot receive or transmit any packets;
- e.g. 'ping' does not work.
-Reason: There is an incorrect route in your routing table.
-Solution: Check the routing table with the command 'route' and read the
- manual help pages dealing with routes (enter 'man route').
-
-NOTE: Although the 2.2.x kernel versions generate the routing entry
- automatically, problems of this kind may occur here as well. We've
- come across a situation in which the driver started correctly at
- system start, but after the driver has been removed and reloaded,
- the route of the adapter's network pointed to the 'dummy0'device
- and had to be corrected manually.
-
-
-Problem: Your computer should act as a router between multiple
- IP subnetworks (using multiple adapters), but computers in
- other subnetworks cannot be reached.
-Reason: Either the router's kernel is not configured for IP forwarding
- or the routing table and gateway configuration of at least one
- computer is not working.
-
-Problem: Upon driver start, the following error message is displayed:
- "eth0: -- ERROR --
- Class: internal Software error
- Nr: 0xcc
- Msg: SkGeInitPort() cannot init running ports"
-Reason: You are using a driver compiled for single processor machines
- on a multiprocessor machine with SMP (Symmetric MultiProcessor)
- kernel.
-Solution: Configure your kernel appropriately and recompile the kernel or
- the modules.
-
-
-
-If your problem is not listed here, please contact SysKonnect's technical
-support for help (linux@syskonnect.de).
-When contacting our technical support, please ensure that the following
-information is available:
-- System Manufacturer and HW Informations (CPU, Memory... )
-- PCI-Boards in your system
-- Distribution
-- Kernel version
-- Driver version
-***
-
-
-
-***End of Readme File***
diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt
index 0eb7c58..e054209 100644
--- a/Documentation/s390/s390dbf.txt
+++ b/Documentation/s390/s390dbf.txt
@@ -115,6 +115,27 @@
Description: Allocates memory for a debug log
Must not be called within an interrupt handler
+----------------------------------------------------------------------------
+debug_info_t *debug_register_mode(char *name, int pages, int nr_areas,
+ int buf_size, mode_t mode, uid_t uid,
+ gid_t gid);
+
+Parameter: name: Name of debug log (e.g. used for debugfs entry)
+ pages: Number of pages, which will be allocated per area
+ nr_areas: Number of debug areas
+ buf_size: Size of data area in each debug entry
+ mode: File mode for debugfs files. E.g. S_IRWXUGO
+ uid: User ID for debugfs files. Currently only 0 is
+ supported.
+ gid: Group ID for debugfs files. Currently only 0 is
+ supported.
+
+Return Value: Handle for generated debug area
+ NULL if register failed
+
+Description: Allocates memory for a debug log
+ Must not be called within an interrupt handler
+
---------------------------------------------------------------------------
void debug_unregister (debug_info_t * id);
diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX
index b5f5ca0..fc234d0 100644
--- a/Documentation/scheduler/00-INDEX
+++ b/Documentation/scheduler/00-INDEX
@@ -12,5 +12,7 @@
- information on scheduling domains.
sched-nice-design.txt
- How and why the scheduler's nice levels are implemented.
+sched-rt-group.txt
+ - real-time group scheduling.
sched-stats.txt
- information on schedstats (Linux Scheduler Statistics).
diff --git a/Documentation/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt
similarity index 100%
rename from Documentation/sched-rt-group.txt
rename to Documentation/scheduler/sched-rt-group.txt
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index 8861e47..6d5f181 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -116,6 +116,13 @@
starting low (CPOL=0) and data stabilized for sampling during the
trailing clock edge (CPHA=1), that's SPI mode 1.
+Note that the clock mode is relevant as soon as the chipselect goes
+active. So the master must set the clock to inactive before selecting
+a slave, and the slave can tell the chosen polarity by sampling the
+clock level when its select line goes active. That's why many devices
+support for example both modes 0 and 3: they don't care about polarity,
+and alway clock data in/out on rising clock edges.
+
How do these driver programming interfaces work?
------------------------------------------------
@@ -379,8 +386,14 @@
+ when bidirectional reads and writes start ... by how its
sequence of spi_transfer requests is arranged;
+ + which I/O buffers are used ... each spi_transfer wraps a
+ buffer for each transfer direction, supporting full duplex
+ (two pointers, maybe the same one in both cases) and half
+ duplex (one pointer is NULL) transfers;
+
+ optionally defining short delays after transfers ... using
- the spi_transfer.delay_usecs setting;
+ the spi_transfer.delay_usecs setting (this delay can be the
+ only protocol effect, if the buffer length is zero);
+ whether the chipselect becomes inactive after a transfer and
any delay ... by using the spi_transfer.cs_change flag;
diff --git a/Documentation/spinlocks.txt b/Documentation/spinlocks.txt
index 471e753..619699d 100644
--- a/Documentation/spinlocks.txt
+++ b/Documentation/spinlocks.txt
@@ -5,6 +5,28 @@
__SPIN_LOCK_UNLOCKED()/__RW_LOCK_UNLOCKED() as appropriate for static
initialization.
+Most of the time, you can simply turn:
+
+ static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
+
+into:
+
+ static DEFINE_SPINLOCK(xxx_lock);
+
+Static structure member variables go from:
+
+ struct foo bar {
+ .lock = SPIN_LOCK_UNLOCKED;
+ };
+
+to:
+
+ struct foo bar {
+ .lock = __SPIN_LOCK_UNLOCKED(bar.lock);
+ };
+
+Declaration of static rw_locks undergo a similar transformation.
+
Dynamic initialization, when necessary, may be performed as
demonstrated below.
diff --git a/Documentation/hrtimers/highres.txt b/Documentation/timers/highres.txt
similarity index 99%
rename from Documentation/hrtimers/highres.txt
rename to Documentation/timers/highres.txt
index ce0e9a9..a73ecf5 100644
--- a/Documentation/hrtimers/highres.txt
+++ b/Documentation/timers/highres.txt
@@ -98,7 +98,7 @@
event devices are used to provide local CPU functionality such as process
accounting, profiling, and high resolution timers.
-The management layer assignes one or more of the folliwing functions to a clock
+The management layer assigns one or more of the following functions to a clock
event device:
- system global periodic tick (jiffies update)
- cpu local update_process_times
diff --git a/Documentation/hrtimers/hrtimers.txt b/Documentation/timers/hrtimers.txt
similarity index 100%
rename from Documentation/hrtimers/hrtimers.txt
rename to Documentation/timers/hrtimers.txt
diff --git a/Documentation/hrtimer/timer_stats.txt b/Documentation/timers/timer_stats.txt
similarity index 100%
rename from Documentation/hrtimer/timer_stats.txt
rename to Documentation/timers/timer_stats.txt
diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt
index 6223eac..b0472ac 100644
--- a/Documentation/unaligned-memory-access.txt
+++ b/Documentation/unaligned-memory-access.txt
@@ -57,7 +57,7 @@
unaligned access to be corrected.
- Some architectures are not capable of unaligned memory access, but will
silently perform a different memory access to the one that was requested,
- resulting a a subtle code bug that is hard to detect!
+ resulting in a subtle code bug that is hard to detect!
It should be obvious from the above that if your code causes unaligned
memory accesses to happen, your code will not work correctly on certain
@@ -209,7 +209,7 @@
u32 value = get_unaligned((u32 *) data);
-These macros work work for memory accesses of any length (not just 32 bits as
+These macros work for memory accesses of any length (not just 32 bits as
in the examples above). Be aware that when compared to standard access of
aligned memory, using these macros to access unaligned memory can be costly in
terms of performance.
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index f962d01..3102b81 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -88,10 +88,9 @@
these surplus hugepages go out of use, they are freed back to the buddy
allocator.
-Caveat: Shrinking the pool via nr_hugepages while a surplus is in effect
-will allow the number of surplus huge pages to exceed the overcommit
-value, as the pool hugepages (which must have been in use for a surplus
-hugepages to be allocated) will become surplus hugepages. As long as
+Caveat: Shrinking the pool via nr_hugepages such that it becomes less
+than the number of hugepages in use will convert the balance to surplus
+huge pages even if it would exceed the overcommit value. As long as
this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt
new file mode 100644
index 0000000..17965f9
--- /dev/null
+++ b/Documentation/x86/pat.txt
@@ -0,0 +1,100 @@
+
+PAT (Page Attribute Table)
+
+x86 Page Attribute Table (PAT) allows for setting the memory attribute at the
+page level granularity. PAT is complementary to the MTRR settings which allows
+for setting of memory types over physical address ranges. However, PAT is
+more flexible than MTRR due to its capability to set attributes at page level
+and also due to the fact that there are no hardware limitations on number of
+such attribute settings allowed. Added flexibility comes with guidelines for
+not having memory type aliasing for the same physical memory with multiple
+virtual addresses.
+
+PAT allows for different types of memory attributes. The most commonly used
+ones that will be supported at this time are Write-back, Uncached,
+Write-combined and Uncached Minus.
+
+There are many different APIs in the kernel that allows setting of memory
+attributes at the page level. In order to avoid aliasing, these interfaces
+should be used thoughtfully. Below is a table of interfaces available,
+their intended usage and their memory attribute relationships. Internally,
+these APIs use a reserve_memtype()/free_memtype() interface on the physical
+address range to avoid any aliasing.
+
+
+-------------------------------------------------------------------
+API | RAM | ACPI,... | Reserved/Holes |
+-----------------------|----------|------------|------------------|
+ | | | |
+ioremap | -- | UC | UC |
+ | | | |
+ioremap_cache | -- | WB | WB |
+ | | | |
+ioremap_nocache | -- | UC | UC |
+ | | | |
+ioremap_wc | -- | -- | WC |
+ | | | |
+set_memory_uc | UC | -- | -- |
+ set_memory_wb | | | |
+ | | | |
+set_memory_wc | WC | -- | -- |
+ set_memory_wb | | | |
+ | | | |
+pci sysfs resource | -- | -- | UC |
+ | | | |
+pci sysfs resource_wc | -- | -- | WC |
+ is IORESOURCE_PREFETCH| | | |
+ | | | |
+pci proc | -- | -- | UC |
+ !PCIIOC_WRITE_COMBINE | | | |
+ | | | |
+pci proc | -- | -- | WC |
+ PCIIOC_WRITE_COMBINE | | | |
+ | | | |
+/dev/mem | -- | UC | UC |
+ read-write | | | |
+ | | | |
+/dev/mem | -- | UC | UC |
+ mmap SYNC flag | | | |
+ | | | |
+/dev/mem | -- | WB/WC/UC | WB/WC/UC |
+ mmap !SYNC flag | |(from exist-| (from exist- |
+ and | | ing alias)| ing alias) |
+ any alias to this area| | | |
+ | | | |
+/dev/mem | -- | WB | WB |
+ mmap !SYNC flag | | | |
+ no alias to this area | | | |
+ and | | | |
+ MTRR says WB | | | |
+ | | | |
+/dev/mem | -- | -- | UC_MINUS |
+ mmap !SYNC flag | | | |
+ no alias to this area | | | |
+ and | | | |
+ MTRR says !WB | | | |
+ | | | |
+-------------------------------------------------------------------
+
+Notes:
+
+-- in the above table mean "Not suggested usage for the API". Some of the --'s
+are strictly enforced by the kernel. Some others are not really enforced
+today, but may be enforced in future.
+
+For ioremap and pci access through /sys or /proc - The actual type returned
+can be more restrictive, in case of any existing aliasing for that address.
+For example: If there is an existing uncached mapping, a new ioremap_wc can
+return uncached mapping in place of write-combine requested.
+
+set_memory_[uc|wc] and set_memory_wb should be used in pairs, where driver will
+first make a region uc or wc and switch it back to wb after use.
+
+Over time writes to /proc/mtrr will be deprecated in favor of using PAT based
+interfaces. Users writing to /proc/mtrr are suggested to use above interfaces.
+
+Drivers should use ioremap_[uc|wc] to access PCI BARs with [uc|wc] access
+types.
+
+Drivers should use set_memory_[uc|wc] to set access type for RAM ranges.
+
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 34abae4..b0c7b6c 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -307,3 +307,8 @@
stuck (default)
Miscellaneous
+
+ nogbpages
+ Do not use GB pages for kernel direct mappings.
+ gbpages
+ Use GB pages for kernel direct mappings.
diff --git a/MAINTAINERS b/MAINTAINERS
index 90dcbbc..3eceebb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2116,7 +2116,7 @@
L: linux-wireless@vger.kernel.org
L: ipw3945-devel@lists.sourceforge.net
W: http://intellinuxwireless.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/rchatre/iwlwifi-2.6.git
+T: git kernel.org:/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
S: Supported
IOC3 ETHERNET DRIVER
@@ -2197,7 +2197,7 @@
ISDN SUBSYSTEM
P: Karsten Keil
M: kkeil@suse.de
-L: isdn4linux@listserv.isdn4linux.de
+L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.isdn4linux.de
T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
S: Maintained
@@ -2205,7 +2205,7 @@
ISDN SUBSYSTEM (Eicon active card driver)
P: Armin Schindler
M: mac@melware.de
-L: isdn4linux@listserv.isdn4linux.de
+L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.melware.de
S: Maintained
@@ -2319,6 +2319,12 @@
L: kexec@lists.infradead.org
S: Maintained
+KGDB
+P: Jason Wessel
+M: jason.wessel@windriver.com
+L: kgdb-bugreport@lists.sourceforge.net
+S: Maintained
+
KPROBES
P: Ananth N Mavinakayanahalli
M: ananth@in.ibm.com
@@ -3280,6 +3286,7 @@
L: rt2400-devel@lists.sourceforge.net
W: http://rt2x00.serialmonkey.com/
S: Maintained
+T: git kernel.org:/pub/scm/linux/kernel/git/ivd/rt2x00.git
F: drivers/net/wireless/rt2x00/
RAMDISK RAM BLOCK DEVICE DRIVER
@@ -3342,6 +3349,13 @@
W: http://www.namesys.com
S: Supported
+RFKILL
+P: Ivo van Doorn
+M: IvDoorn@gmail.com
+L: netdev@vger.kernel.org
+S: Maintained
+F: net/rfkill
+
ROCKETPORT DRIVER
P: Comtrol Corp.
W: http://www.comtrol.com
diff --git a/Makefile b/Makefile
index b08a259..39516bf 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 25
-EXTRAVERSION = -rc7
+EXTRAVERSION =
NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index dccf052..ac706c1 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -7,7 +7,7 @@
EXTRA_CFLAGS := -Werror -Wno-sign-compare
obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
- irq_alpha.o signal.o setup.o ptrace.o time.o semaphore.o \
+ irq_alpha.o signal.o setup.o ptrace.o time.o \
alpha_ksyms.o systbls.o err_common.o io.o
obj-$(CONFIG_VGA_HOSE) += console.o
diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c
index e9762a3..d96e742 100644
--- a/arch/alpha/kernel/alpha_ksyms.c
+++ b/arch/alpha/kernel/alpha_ksyms.c
@@ -77,15 +77,6 @@
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(__strnlen_user);
-/* Semaphore helper functions. */
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__up_wakeup);
-EXPORT_SYMBOL(down);
-EXPORT_SYMBOL(down_interruptible);
-EXPORT_SYMBOL(down_trylock);
-EXPORT_SYMBOL(up);
-
/*
* SMP-specific symbols.
*/
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 4e1c086..dd6e334 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -424,11 +424,13 @@
else DMA_ADDRP is undefined. */
void *
-pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+ dma_addr_t *dma_addrp, gfp_t gfp)
{
void *cpu_addr;
long order = get_order(size);
- gfp_t gfp = GFP_ATOMIC;
+
+ gfp &= ~GFP_DMA;
try_again:
cpu_addr = (void *)__get_free_pages(gfp, order);
@@ -458,7 +460,7 @@
return cpu_addr;
}
-EXPORT_SYMBOL(pci_alloc_consistent);
+EXPORT_SYMBOL(__pci_alloc_consistent);
/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must
be values that were returned from pci_alloc_consistent. SIZE must
diff --git a/arch/alpha/kernel/semaphore.c b/arch/alpha/kernel/semaphore.c
deleted file mode 100644
index 8d2982a..0000000
--- a/arch/alpha/kernel/semaphore.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Alpha semaphore implementation.
- *
- * (C) Copyright 1996 Linus Torvalds
- * (C) Copyright 1999, 2000 Richard Henderson
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-
-/*
- * This is basically the PPC semaphore scheme ported to use
- * the Alpha ll/sc sequences, so see the PPC code for
- * credits.
- */
-
-/*
- * Atomically update sem->count.
- * This does the equivalent of the following:
- *
- * old_count = sem->count;
- * tmp = MAX(old_count, 0) + incr;
- * sem->count = tmp;
- * return old_count;
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
- long old_count, tmp = 0;
-
- __asm__ __volatile__(
- "1: ldl_l %0,%2\n"
- " cmovgt %0,%0,%1\n"
- " addl %1,%3,%1\n"
- " stl_c %1,%2\n"
- " beq %1,2f\n"
- " mb\n"
- ".subsection 2\n"
- "2: br 1b\n"
- ".previous"
- : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
- : "Ir" (incr), "1" (tmp), "m" (sem->count));
-
- return old_count;
-}
-
-/*
- * Perform the "down" function. Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from down, the return is ignored and the wait loop is
- * not interruptible. This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from down_interruptible, the return value gets checked
- * upon return. If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- */
-
-void __sched
-__down_failed(struct semaphore *sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
- printk("%s(%d): down failed(%p)\n",
- tsk->comm, task_pid_nr(tsk), sem);
-#endif
-
- tsk->state = TASK_UNINTERRUPTIBLE;
- wmb();
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- /*
- * Try to get the semaphore. If the count is > 0, then we've
- * got the semaphore; we decrement count and exit the loop.
- * If the count is 0 or negative, we set it to -1, indicating
- * that we are asleep, and then sleep.
- */
- while (__sem_update_count(sem, -1) <= 0) {
- schedule();
- set_task_state(tsk, TASK_UNINTERRUPTIBLE);
- }
- remove_wait_queue(&sem->wait, &wait);
- tsk->state = TASK_RUNNING;
-
- /*
- * If there are any more sleepers, wake one of them up so
- * that it can either get the semaphore, or set count to -1
- * indicating that there are still processes sleeping.
- */
- wake_up(&sem->wait);
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
- printk("%s(%d): down acquired(%p)\n",
- tsk->comm, task_pid_nr(tsk), sem);
-#endif
-}
-
-int __sched
-__down_failed_interruptible(struct semaphore *sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- long ret = 0;
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
- printk("%s(%d): down failed(%p)\n",
- tsk->comm, task_pid_nr(tsk), sem);
-#endif
-
- tsk->state = TASK_INTERRUPTIBLE;
- wmb();
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- while (__sem_update_count(sem, -1) <= 0) {
- if (signal_pending(current)) {
- /*
- * A signal is pending - give up trying.
- * Set sem->count to 0 if it is negative,
- * since we are no longer sleeping.
- */
- __sem_update_count(sem, 0);
- ret = -EINTR;
- break;
- }
- schedule();
- set_task_state(tsk, TASK_INTERRUPTIBLE);
- }
-
- remove_wait_queue(&sem->wait, &wait);
- tsk->state = TASK_RUNNING;
- wake_up(&sem->wait);
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
- printk("%s(%d): down %s(%p)\n",
- current->comm, task_pid_nr(current),
- (ret < 0 ? "interrupted" : "acquired"), sem);
-#endif
- return ret;
-}
-
-void
-__up_wakeup(struct semaphore *sem)
-{
- /*
- * Note that we incremented count in up() before we came here,
- * but that was ineffective since the result was <= 0, and
- * any negative value of count is equivalent to 0.
- * This ends up setting count to 1, unless count is now > 0
- * (i.e. because some other cpu has called up() in the meantime),
- * in which case we just increment count.
- */
- __sem_update_count(sem, 1);
- wake_up(&sem->wait);
-}
-
-void __sched
-down(struct semaphore *sem)
-{
-#ifdef WAITQUEUE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-#ifdef CONFIG_DEBUG_SEMAPHORE
- printk("%s(%d): down(%p) <count=%d> from %p\n",
- current->comm, task_pid_nr(current), sem,
- atomic_read(&sem->count), __builtin_return_address(0));
-#endif
- __down(sem);
-}
-
-int __sched
-down_interruptible(struct semaphore *sem)
-{
-#ifdef WAITQUEUE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-#ifdef CONFIG_DEBUG_SEMAPHORE
- printk("%s(%d): down(%p) <count=%d> from %p\n",
- current->comm, task_pid_nr(current), sem,
- atomic_read(&sem->count), __builtin_return_address(0));
-#endif
- return __down_interruptible(sem);
-}
-
-int
-down_trylock(struct semaphore *sem)
-{
- int ret;
-
-#ifdef WAITQUEUE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-
- ret = __down_trylock(sem);
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
- printk("%s(%d): down_trylock %s from %p\n",
- current->comm, task_pid_nr(current),
- ret ? "failed" : "acquired",
- __builtin_return_address(0));
-#endif
-
- return ret;
-}
-
-void
-up(struct semaphore *sem)
-{
-#ifdef WAITQUEUE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-#ifdef CONFIG_DEBUG_SEMAPHORE
- printk("%s(%d): up(%p) <count=%d> from %p\n",
- current->comm, task_pid_nr(current), sem,
- atomic_read(&sem->count), __builtin_return_address(0));
-#endif
- __up(sem);
-}
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 5382622..5fe9588 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -120,6 +120,7 @@
time, when they all three were 0. */
bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
+ bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
if (!(bits_ld | bits_lp | bits_pd))
return;
}
@@ -133,14 +134,14 @@
bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
while (bits_lp) {
- i = __ffs(bits_pd);
+ i = __ffs(bits_lp);
it8152_irq(IT8152_LP_IRQ(i));
bits_lp &= ~(1 << i);
}
bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
while (bits_ld) {
- i = __ffs(bits_pd);
+ i = __ffs(bits_ld);
it8152_irq(IT8152_LD_IRQ(i));
bits_ld &= ~(1 << i);
}
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 00d44c6..6235f72 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -7,7 +7,7 @@
# Object file lists.
obj-y := compat.o entry-armv.o entry-common.o irq.o \
- process.o ptrace.o semaphore.o setup.o signal.o \
+ process.o ptrace.o setup.o signal.o \
sys_arm.o stacktrace.o time.o traps.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 283e14f..7e97b73 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -336,7 +336,7 @@
CALL(sys_mknodat)
/* 325 */ CALL(sys_fchownat)
CALL(sys_futimesat)
- CALL(sys_fstatat64)
+ CALL(ABI(sys_fstatat64, sys_oabi_fstatat64))
CALL(sys_unlinkat)
CALL(sys_renameat)
/* 330 */ CALL(sys_linkat)
diff --git a/arch/arm/kernel/semaphore.c b/arch/arm/kernel/semaphore.c
deleted file mode 100644
index 981fe5c..0000000
--- a/arch/arm/kernel/semaphore.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * ARM semaphore implementation, taken from
- *
- * i386 semaphore implementation.
- *
- * (C) Copyright 1999 Linus Torvalds
- *
- * Modified for ARM by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <asm/semaphore.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is
- * protected by the semaphore spinlock.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- * - only on a boundary condition do we need to care. When we go
- * from a negative count to a non-negative, we wake people up.
- * - when we go from a non-negative count to a negative do we
- * (a) synchronize with the "sleeper" count and (b) make sure
- * that we're on the wakeup list before we synchronize so that
- * we cannot lose wakeup events.
- */
-
-void __up(struct semaphore *sem)
-{
- wake_up(&sem->wait);
-}
-
-static DEFINE_SPINLOCK(semaphore_lock);
-
-void __sched __down(struct semaphore * sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- tsk->state = TASK_UNINTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- spin_lock_irq(&semaphore_lock);
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irq(&semaphore_lock);
-
- schedule();
- tsk->state = TASK_UNINTERRUPTIBLE;
- spin_lock_irq(&semaphore_lock);
- }
- spin_unlock_irq(&semaphore_lock);
- remove_wait_queue(&sem->wait, &wait);
- tsk->state = TASK_RUNNING;
- wake_up(&sem->wait);
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- tsk->state = TASK_INTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- spin_lock_irq(&semaphore_lock);
- sem->sleepers ++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * With signals pending, this turns into
- * the trylock failure case - we won't be
- * sleeping, and we* can't get the lock as
- * it has contention. Just correct the count
- * and exit.
- */
- if (signal_pending(current)) {
- retval = -EINTR;
- sem->sleepers = 0;
- atomic_add(sleepers, &sem->count);
- break;
- }
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock. The
- * "-1" is because we're still hoping to get
- * the lock.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irq(&semaphore_lock);
-
- schedule();
- tsk->state = TASK_INTERRUPTIBLE;
- spin_lock_irq(&semaphore_lock);
- }
- spin_unlock_irq(&semaphore_lock);
- tsk->state = TASK_RUNNING;
- remove_wait_queue(&sem->wait, &wait);
- wake_up(&sem->wait);
- return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- *
- * We could have done the trylock with a
- * single "cmpxchg" without failure cases,
- * but then it wouldn't work on a 386.
- */
-int __down_trylock(struct semaphore * sem)
-{
- int sleepers;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_lock, flags);
- sleepers = sem->sleepers + 1;
- sem->sleepers = 0;
-
- /*
- * Add "everybody else" and us into it. They aren't
- * playing, because we own the spinlock.
- */
- if (!atomic_add_negative(sleepers, &sem->count))
- wake_up(&sem->wait);
-
- spin_unlock_irqrestore(&semaphore_lock, flags);
- return 1;
-}
-
-/*
- * The semaphore operations have a special calling sequence that
- * allow us to do a simpler in-line version of them. These routines
- * need to convert that sequence back into the C sequence when
- * there is contention on the semaphore.
- *
- * ip contains the semaphore pointer on entry. Save the C-clobbered
- * registers (r0 to r3 and lr), but not ip, as we use it as a return
- * value in some cases..
- * To remain AAPCS compliant (64-bit stack align) we save r4 as well.
- */
-asm(" .section .sched.text,\"ax\",%progbits \n\
- .align 5 \n\
- .globl __down_failed \n\
-__down_failed: \n\
- stmfd sp!, {r0 - r4, lr} \n\
- mov r0, ip \n\
- bl __down \n\
- ldmfd sp!, {r0 - r4, pc} \n\
- \n\
- .align 5 \n\
- .globl __down_interruptible_failed \n\
-__down_interruptible_failed: \n\
- stmfd sp!, {r0 - r4, lr} \n\
- mov r0, ip \n\
- bl __down_interruptible \n\
- mov ip, r0 \n\
- ldmfd sp!, {r0 - r4, pc} \n\
- \n\
- .align 5 \n\
- .globl __down_trylock_failed \n\
-__down_trylock_failed: \n\
- stmfd sp!, {r0 - r4, lr} \n\
- mov r0, ip \n\
- bl __down_trylock \n\
- mov ip, r0 \n\
- ldmfd sp!, {r0 - r4, pc} \n\
- \n\
- .align 5 \n\
- .globl __up_wakeup \n\
-__up_wakeup: \n\
- stmfd sp!, {r0 - r4, lr} \n\
- mov r0, ip \n\
- bl __up \n\
- ldmfd sp!, {r0 - r4, pc} \n\
- ");
-
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_interruptible_failed);
-EXPORT_SYMBOL(__down_trylock_failed);
-EXPORT_SYMBOL(__up_wakeup);
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index e8b9804..96ab5f5 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -25,6 +25,7 @@
* sys_stat64:
* sys_lstat64:
* sys_fstat64:
+ * sys_fstatat64:
*
* struct stat64 has different sizes and some members are shifted
* Compatibility wrappers are needed for them and provided below.
@@ -169,6 +170,29 @@
return error;
}
+asmlinkage long sys_oabi_fstatat64(int dfd,
+ char __user *filename,
+ struct oldabi_stat64 __user *statbuf,
+ int flag)
+{
+ struct kstat stat;
+ int error = -EINVAL;
+
+ if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+ goto out;
+
+ if (flag & AT_SYMLINK_NOFOLLOW)
+ error = vfs_lstat_fd(dfd, filename, &stat);
+ else
+ error = vfs_stat_fd(dfd, filename, &stat);
+
+ if (!error)
+ error = cp_oldabi_stat64(&stat, statbuf);
+
+out:
+ return error;
+}
+
struct oabi_flock64 {
short l_type;
short l_whence;
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index c75d708..28e0caf 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,7 +10,6 @@
# With EMBEDDED=n, we get lots of stuff automatically selected
# that we usually don't need on AVR32.
select EMBEDDED
- select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
help
diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
index e4b6d12..18229d0 100644
--- a/arch/avr32/kernel/Makefile
+++ b/arch/avr32/kernel/Makefile
@@ -6,7 +6,7 @@
obj-$(CONFIG_SUBARCH_AVR32B) += entry-avr32b.o
obj-y += syscall_table.o syscall-stubs.o irq.o
-obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
+obj-y += setup.o traps.o ocd.o ptrace.o
obj-y += signal.o sys_avr32.o process.o time.o
obj-y += init_task.o switch_to.o cpu.o
obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
diff --git a/arch/avr32/kernel/semaphore.c b/arch/avr32/kernel/semaphore.c
deleted file mode 100644
index 1e2705a..0000000
--- a/arch/avr32/kernel/semaphore.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * AVR32 sempahore implementation.
- *
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * Based on linux/arch/i386/kernel/semaphore.c
- * Copyright (C) 1999 Linus Torvalds
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-
-#include <asm/semaphore.h>
-#include <asm/atomic.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is protected
- * by the spinlock in the semaphore's waitqueue head.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- * - only on a boundary condition do we need to care. When we go
- * from a negative count to a non-negative, we wake people up.
- * - when we go from a non-negative count to a negative do we
- * (a) synchronize with the "sleeper" count and (b) make sure
- * that we're on the wakeup list before we synchronize so that
- * we cannot lose wakeup events.
- */
-
-void __up(struct semaphore *sem)
-{
- wake_up(&sem->wait);
-}
-EXPORT_SYMBOL(__up);
-
-void __sched __down(struct semaphore *sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- unsigned long flags;
-
- tsk->state = TASK_UNINTERRUPTIBLE;
- spin_lock_irqsave(&sem->wait.lock, flags);
- add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock in
- * the wait_queue_head.
- */
- if (atomic_add_return(sleepers - 1, &sem->count) >= 0) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- schedule();
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- tsk->state = TASK_UNINTERRUPTIBLE;
- }
- remove_wait_queue_locked(&sem->wait, &wait);
- wake_up_locked(&sem->wait);
- spin_unlock_irqrestore(&sem->wait.lock, flags);
- tsk->state = TASK_RUNNING;
-}
-EXPORT_SYMBOL(__down);
-
-int __sched __down_interruptible(struct semaphore *sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- unsigned long flags;
-
- tsk->state = TASK_INTERRUPTIBLE;
- spin_lock_irqsave(&sem->wait.lock, flags);
- add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * With signals pending, this turns into the trylock
- * failure case - we won't be sleeping, and we can't
- * get the lock as it has contention. Just correct the
- * count and exit.
- */
- if (signal_pending(current)) {
- retval = -EINTR;
- sem->sleepers = 0;
- atomic_add(sleepers, &sem->count);
- break;
- }
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock in
- * the wait_queue_head.
- */
- if (atomic_add_return(sleepers - 1, &sem->count) >= 0) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- schedule();
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- tsk->state = TASK_INTERRUPTIBLE;
- }
- remove_wait_queue_locked(&sem->wait, &wait);
- wake_up_locked(&sem->wait);
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- tsk->state = TASK_RUNNING;
- return retval;
-}
-EXPORT_SYMBOL(__down_interruptible);
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 589c6ac..2dd1f30 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -31,10 +31,6 @@
bool
default y
-config SEMAPHORE_SLEEPERS
- bool
- default y
-
config GENERIC_FIND_NEXT_BIT
bool
default y
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index 0bfbb26..053edff 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -42,11 +42,6 @@
EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_trylock);
-EXPORT_SYMBOL(__down_interruptible);
-
EXPORT_SYMBOL(is_in_rom);
EXPORT_SYMBOL(bfin_return_from_exception);
diff --git a/arch/cris/kernel/Makefile b/arch/cris/kernel/Makefile
index c8e8ea5..ee7bcd4 100644
--- a/arch/cris/kernel/Makefile
+++ b/arch/cris/kernel/Makefile
@@ -5,8 +5,7 @@
extra-y := vmlinux.lds
-obj-y := process.o traps.o irq.o ptrace.o setup.o \
- time.o sys_cris.o semaphore.o
+obj-y := process.o traps.o irq.o ptrace.o setup.o time.o sys_cris.o
obj-$(CONFIG_MODULES) += crisksyms.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/cris/kernel/crisksyms.c b/arch/cris/kernel/crisksyms.c
index 62f0e75..7ac000f 100644
--- a/arch/cris/kernel/crisksyms.c
+++ b/arch/cris/kernel/crisksyms.c
@@ -9,7 +9,6 @@
#include <linux/string.h>
#include <linux/tty.h>
-#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/checksum.h>
@@ -49,12 +48,6 @@
EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
-/* Semaphore functions */
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__down_trylock);
-
/* Userspace access functions */
EXPORT_SYMBOL(__copy_user_zeroing);
EXPORT_SYMBOL(__copy_user);
diff --git a/arch/cris/kernel/semaphore.c b/arch/cris/kernel/semaphore.c
deleted file mode 100644
index f137a439..0000000
--- a/arch/cris/kernel/semaphore.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/sched.h>
-#include <asm/semaphore-helper.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit. ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore. The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
- wake_one_more(sem);
- wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function. Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible. This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return. If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-#define DOWN_VAR \
- struct task_struct *tsk = current; \
- wait_queue_t wait; \
- init_waitqueue_entry(&wait, tsk);
-
-#define DOWN_HEAD(task_state) \
- \
- \
- tsk->state = (task_state); \
- add_wait_queue(&sem->wait, &wait); \
- \
- /* \
- * Ok, we're set up. sem->count is known to be less than zero \
- * so we must wait. \
- * \
- * We can let go the lock for purposes of waiting. \
- * We re-acquire it after awaking so as to protect \
- * all semaphore operations. \
- * \
- * If "up()" is called before we call waking_non_zero() then \
- * we will catch it right away. If it is called later then \
- * we will have to go through a wakeup cycle to catch it. \
- * \
- * Multiple waiters contend for the semaphore lock to see \
- * who gets to gate through and who has to wait some more. \
- */ \
- for (;;) {
-
-#define DOWN_TAIL(task_state) \
- tsk->state = (task_state); \
- } \
- tsk->state = TASK_RUNNING; \
- remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
- DOWN_VAR
- DOWN_HEAD(TASK_UNINTERRUPTIBLE)
- if (waking_non_zero(sem))
- break;
- schedule();
- DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
- DOWN_VAR
- DOWN_HEAD(TASK_INTERRUPTIBLE)
-
- ret = waking_non_zero_interruptible(sem, tsk);
- if (ret)
- {
- if (ret == 1)
- /* ret != 0 only if we get interrupted -arca */
- ret = 0;
- break;
- }
- schedule();
- DOWN_TAIL(TASK_INTERRUPTIBLE)
- return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
- return waking_non_zero_trylock(sem);
-}
diff --git a/arch/frv/kernel/Makefile b/arch/frv/kernel/Makefile
index e8f73ed..c36f70b 100644
--- a/arch/frv/kernel/Makefile
+++ b/arch/frv/kernel/Makefile
@@ -9,7 +9,7 @@
obj-y := $(heads-y) entry.o entry-table.o break.o switch_to.o kernel_thread.o \
kernel_execve.o process.o traps.o ptrace.o signal.o dma.o \
- sys_frv.o time.o semaphore.o setup.o frv_ksyms.o \
+ sys_frv.o time.o setup.o frv_ksyms.o \
debug-stub.o irq.o sleep.o uaccess.o
obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-io.o
diff --git a/arch/frv/kernel/entry-table.S b/arch/frv/kernel/entry-table.S
index d3b9253..bf35f33 100644
--- a/arch/frv/kernel/entry-table.S
+++ b/arch/frv/kernel/entry-table.S
@@ -316,8 +316,14 @@
.section .trap.vector
.org TBR_TT_TRAP0 >> 2
.long system_call
- .rept 126
+ .rept 119
.long __entry_unsupported_trap
.endr
+
+ # userspace atomic op emulation, traps 120-126
+ .rept 7
+ .long __entry_atomic_op
+ .endr
+
.org TBR_TT_BREAK >> 2
.long __entry_debug_exception
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index f36d7f4..b8a4b94 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -656,6 +656,26 @@
###############################################################################
#
+# handle atomic operation emulation for userspace
+#
+###############################################################################
+ .globl __entry_atomic_op
+__entry_atomic_op:
+ LEDS 0x6012
+ sethi.p %hi(atomic_operation),gr5
+ setlo %lo(atomic_operation),gr5
+ movsg esfr1,gr8
+ movsg epcr0,gr9
+ movsg esr0,gr10
+
+ # now that we've accessed the exception regs, we can enable exceptions
+ movsg psr,gr4
+ ori gr4,#PSR_ET,gr4
+ movgs gr4,psr
+ jmpl @(gr5,gr0) ; call atomic_operation(esfr1,epcr0,esr0)
+
+###############################################################################
+#
# handle media exception
#
###############################################################################
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index f772704..0316b3c 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -12,7 +12,6 @@
#include <asm/pgalloc.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/semaphore.h>
#include <asm/checksum.h>
#include <asm/hardirq.h>
#include <asm/cacheflush.h>
diff --git a/arch/frv/kernel/head.inc b/arch/frv/kernel/head.inc
index d424cd2..bff6662 100644
--- a/arch/frv/kernel/head.inc
+++ b/arch/frv/kernel/head.inc
@@ -46,5 +46,5 @@
#ifdef CONFIG_MMU
__sdram_base = 0x00000000 /* base address to which SDRAM relocated */
#else
-__sdram_base = 0xc0000000 /* base address to which SDRAM relocated */
+__sdram_base = __page_offset /* base address to which SDRAM relocated */
#endif
diff --git a/arch/frv/kernel/semaphore.c b/arch/frv/kernel/semaphore.c
deleted file mode 100644
index 7ee3a14..0000000
--- a/arch/frv/kernel/semaphore.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* semaphore.c: FR-V semaphores
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from lib/rwsem-spinlock.c
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <asm/semaphore.h>
-
-struct sem_waiter {
- struct list_head list;
- struct task_struct *task;
-};
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
-void semtrace(struct semaphore *sem, const char *str)
-{
- if (sem->debug)
- printk("[%d] %s({%d,%d})\n",
- current->pid,
- str,
- sem->counter,
- list_empty(&sem->wait_list) ? 0 : 1);
-}
-#else
-#define semtrace(SEM,STR) do { } while(0)
-#endif
-
-/*
- * wait for a token to be granted from a semaphore
- * - entered with lock held and interrupts disabled
- */
-void __down(struct semaphore *sem, unsigned long flags)
-{
- struct task_struct *tsk = current;
- struct sem_waiter waiter;
-
- semtrace(sem, "Entering __down");
-
- /* set up my own style of waitqueue */
- waiter.task = tsk;
- get_task_struct(tsk);
-
- list_add_tail(&waiter.list, &sem->wait_list);
-
- /* we don't need to touch the semaphore struct anymore */
- spin_unlock_irqrestore(&sem->wait_lock, flags);
-
- /* wait to be given the semaphore */
- set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-
- for (;;) {
- if (list_empty(&waiter.list))
- break;
- schedule();
- set_task_state(tsk, TASK_UNINTERRUPTIBLE);
- }
-
- tsk->state = TASK_RUNNING;
- semtrace(sem, "Leaving __down");
-}
-
-EXPORT_SYMBOL(__down);
-
-/*
- * interruptibly wait for a token to be granted from a semaphore
- * - entered with lock held and interrupts disabled
- */
-int __down_interruptible(struct semaphore *sem, unsigned long flags)
-{
- struct task_struct *tsk = current;
- struct sem_waiter waiter;
- int ret;
-
- semtrace(sem,"Entering __down_interruptible");
-
- /* set up my own style of waitqueue */
- waiter.task = tsk;
- get_task_struct(tsk);
-
- list_add_tail(&waiter.list, &sem->wait_list);
-
- /* we don't need to touch the semaphore struct anymore */
- set_task_state(tsk, TASK_INTERRUPTIBLE);
-
- spin_unlock_irqrestore(&sem->wait_lock, flags);
-
- /* wait to be given the semaphore */
- ret = 0;
- for (;;) {
- if (list_empty(&waiter.list))
- break;
- if (unlikely(signal_pending(current)))
- goto interrupted;
- schedule();
- set_task_state(tsk, TASK_INTERRUPTIBLE);
- }
-
- out:
- tsk->state = TASK_RUNNING;
- semtrace(sem, "Leaving __down_interruptible");
- return ret;
-
- interrupted:
- spin_lock_irqsave(&sem->wait_lock, flags);
-
- if (!list_empty(&waiter.list)) {
- list_del(&waiter.list);
- ret = -EINTR;
- }
-
- spin_unlock_irqrestore(&sem->wait_lock, flags);
- if (ret == -EINTR)
- put_task_struct(current);
- goto out;
-}
-
-EXPORT_SYMBOL(__down_interruptible);
-
-/*
- * release a single token back to a semaphore
- * - entered with lock held and interrupts disabled
- */
-void __up(struct semaphore *sem)
-{
- struct task_struct *tsk;
- struct sem_waiter *waiter;
-
- semtrace(sem,"Entering __up");
-
- /* grant the token to the process at the front of the queue */
- waiter = list_entry(sem->wait_list.next, struct sem_waiter, list);
-
- /* We must be careful not to touch 'waiter' after we set ->task = NULL.
- * It is allocated on the waiter's stack and may become invalid at
- * any time after that point (due to a wakeup from another source).
- */
- list_del_init(&waiter->list);
- tsk = waiter->task;
- mb();
- waiter->task = NULL;
- wake_up_process(tsk);
- put_task_struct(tsk);
-
- semtrace(sem,"Leaving __up");
-}
-
-EXPORT_SYMBOL(__up);
diff --git a/arch/frv/kernel/switch_to.S b/arch/frv/kernel/switch_to.S
index b5275fa..b066686 100644
--- a/arch/frv/kernel/switch_to.S
+++ b/arch/frv/kernel/switch_to.S
@@ -102,13 +102,6 @@
movgs gr14,lr
bar
- srli gr15,#28,gr5
- subicc gr5,#0xc,gr0,icc0
- beq icc0,#0,111f
- break
- nop
-111:
-
# jump to __switch_back or ret_from_fork as appropriate
# - move prev to GR8
movgs gr4,psr
diff --git a/arch/frv/kernel/traps.c b/arch/frv/kernel/traps.c
index 2e6098c..7089c24 100644
--- a/arch/frv/kernel/traps.c
+++ b/arch/frv/kernel/traps.c
@@ -73,7 +73,7 @@
epcr0, esr0, esfr1);
info.si_errno = 0;
- info.si_addr = (void *) ((epcr0 & EPCR0_PC) ? (epcr0 & EPCR0_PC) : __frame->pc);
+ info.si_addr = (void *) ((epcr0 & EPCR0_V) ? (epcr0 & EPCR0_PC) : __frame->pc);
switch (__frame->tbr & TBR_TT) {
case TBR_TT_ILLEGAL_INSTR:
@@ -102,6 +102,233 @@
/*****************************************************************************/
/*
+ * handle atomic operations with errors
+ * - arguments in gr8, gr9, gr10
+ * - original memory value placed in gr5
+ * - replacement memory value placed in gr9
+ */
+asmlinkage void atomic_operation(unsigned long esfr1, unsigned long epcr0,
+ unsigned long esr0)
+{
+ static DEFINE_SPINLOCK(atomic_op_lock);
+ unsigned long x, y, z, *p;
+ mm_segment_t oldfs;
+ siginfo_t info;
+ int ret;
+
+ y = 0;
+ z = 0;
+
+ oldfs = get_fs();
+ if (!user_mode(__frame))
+ set_fs(KERNEL_DS);
+
+ switch (__frame->tbr & TBR_TT) {
+ /* TIRA gr0,#120
+ * u32 __atomic_user_cmpxchg32(u32 *ptr, u32 test, u32 new)
+ */
+ case TBR_TT_ATOMIC_CMPXCHG32:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+ y = __frame->gr10;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ if (z != x)
+ goto done;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ if (z != x)
+ goto done2;
+
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#121
+ * u32 __atomic_kernel_xchg32(void *v, u32 new)
+ */
+ case TBR_TT_ATOMIC_XCHG32:
+ p = (unsigned long *) __frame->gr8;
+ y = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#122
+ * ulong __atomic_kernel_XOR_return(ulong i, ulong *v)
+ */
+ case TBR_TT_ATOMIC_XOR:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ y = x ^ z;
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#123
+ * ulong __atomic_kernel_OR_return(ulong i, ulong *v)
+ */
+ case TBR_TT_ATOMIC_OR:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ y = x ^ z;
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#124
+ * ulong __atomic_kernel_AND_return(ulong i, ulong *v)
+ */
+ case TBR_TT_ATOMIC_AND:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ y = x & z;
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#125
+ * int __atomic_user_sub_return(atomic_t *v, int i)
+ */
+ case TBR_TT_ATOMIC_SUB:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ y = z - x;
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#126
+ * int __atomic_user_add_return(atomic_t *v, int i)
+ */
+ case TBR_TT_ATOMIC_ADD:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ y = z + x;
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ default:
+ BUG();
+ }
+
+done2:
+ spin_unlock_irq(&atomic_op_lock);
+done:
+ if (!user_mode(__frame))
+ set_fs(oldfs);
+ __frame->gr5 = z;
+ __frame->gr9 = y;
+ return;
+
+error2:
+ spin_unlock_irq(&atomic_op_lock);
+error:
+ if (!user_mode(__frame))
+ set_fs(oldfs);
+ __frame->pc -= 4;
+
+ die_if_kernel("-- Atomic Op Error --\n");
+
+ info.si_signo = SIGSEGV;
+ info.si_code = SEGV_ACCERR;
+ info.si_errno = 0;
+ info.si_addr = (void *) __frame->pc;
+
+ force_sig_info(info.si_signo, &info, current);
+}
+
+/*****************************************************************************/
+/*
*
*/
asmlinkage void media_exception(unsigned long msr0, unsigned long msr1)
diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile
index 874f6ae..6c248c3 100644
--- a/arch/h8300/kernel/Makefile
+++ b/arch/h8300/kernel/Makefile
@@ -5,7 +5,7 @@
extra-y := vmlinux.lds
obj-y := process.o traps.o ptrace.o irq.o \
- sys_h8300.o time.o semaphore.o signal.o \
+ sys_h8300.o time.o signal.o \
setup.o gpio.o init_task.o syscalls.o \
entry.o
diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c
index d1b1526..6866bd9 100644
--- a/arch/h8300/kernel/h8300_ksyms.c
+++ b/arch/h8300/kernel/h8300_ksyms.c
@@ -12,7 +12,6 @@
#include <asm/pgalloc.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/semaphore.h>
#include <asm/checksum.h>
#include <asm/current.h>
#include <asm/gpio.h>
diff --git a/arch/h8300/kernel/semaphore.c b/arch/h8300/kernel/semaphore.c
deleted file mode 100644
index d12cbbf..0000000
--- a/arch/h8300/kernel/semaphore.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/semaphore-helper.h>
-
-#ifndef CONFIG_RMW_INSNS
-spinlock_t semaphore_wake_lock;
-#endif
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit. ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore. The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
- wake_one_more(sem);
- wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function. Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible. This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return. If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-
-#define DOWN_HEAD(task_state) \
- \
- \
- current->state = (task_state); \
- add_wait_queue(&sem->wait, &wait); \
- \
- /* \
- * Ok, we're set up. sem->count is known to be less than zero \
- * so we must wait. \
- * \
- * We can let go the lock for purposes of waiting. \
- * We re-acquire it after awaking so as to protect \
- * all semaphore operations. \
- * \
- * If "up()" is called before we call waking_non_zero() then \
- * we will catch it right away. If it is called later then \
- * we will have to go through a wakeup cycle to catch it. \
- * \
- * Multiple waiters contend for the semaphore lock to see \
- * who gets to gate through and who has to wait some more. \
- */ \
- for (;;) {
-
-#define DOWN_TAIL(task_state) \
- current->state = (task_state); \
- } \
- current->state = TASK_RUNNING; \
- remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- DOWN_HEAD(TASK_UNINTERRUPTIBLE)
- if (waking_non_zero(sem))
- break;
- schedule();
- DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
-
- DOWN_HEAD(TASK_INTERRUPTIBLE)
-
- ret = waking_non_zero_interruptible(sem, current);
- if (ret)
- {
- if (ret == 1)
- /* ret != 0 only if we get interrupted -arca */
- ret = 0;
- break;
- }
- schedule();
- DOWN_TAIL(TASK_INTERRUPTIBLE)
- return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
- return waking_non_zero_trylock(sem);
-}
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 8fa3faf..ed21737 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -283,6 +283,17 @@
default "17" if HUGETLB_PAGE
default "11"
+config VIRT_CPU_ACCOUNTING
+ bool "Deterministic task and CPU time accounting"
+ default n
+ help
+ Select this option to enable more accurate task and CPU time
+ accounting. This is done by reading a CPU counter on each
+ kernel entry and exit and on transitions within the kernel
+ between system, softirq and hardirq state, so there is a
+ small performance impact.
+ If in doubt, say N here.
+
config SMP
bool "Symmetric multi-processing support"
help
@@ -611,6 +622,9 @@
bool
default y
+config IOMMU_HELPER
+ def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC)
+
source "arch/ia64/hp/sim/Kconfig"
source "arch/ia64/Kconfig.debug"
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 523eae6..9409de5 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -35,6 +35,7 @@
#include <linux/nodemask.h>
#include <linux/bitops.h> /* hweight64() */
#include <linux/crash_dump.h>
+#include <linux/iommu-helper.h>
#include <asm/delay.h> /* ia64_get_itc() */
#include <asm/io.h>
@@ -460,6 +461,13 @@
return order;
}
+static unsigned long ptr_to_pide(struct ioc *ioc, unsigned long *res_ptr,
+ unsigned int bitshiftcnt)
+{
+ return (((unsigned long)res_ptr - (unsigned long)ioc->res_map) << 3)
+ + bitshiftcnt;
+}
+
/**
* sba_search_bitmap - find free space in IO PDIR resource bitmap
* @ioc: IO MMU structure which owns the pdir we are interested in.
@@ -471,15 +479,25 @@
* Cool perf optimization: search for log2(size) bits at a time.
*/
static SBA_INLINE unsigned long
-sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted, int use_hint)
+sba_search_bitmap(struct ioc *ioc, struct device *dev,
+ unsigned long bits_wanted, int use_hint)
{
unsigned long *res_ptr;
unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
- unsigned long flags, pide = ~0UL;
+ unsigned long flags, pide = ~0UL, tpide;
+ unsigned long boundary_size;
+ unsigned long shift;
+ int ret;
ASSERT(((unsigned long) ioc->res_hint & (sizeof(unsigned long) - 1UL)) == 0);
ASSERT(res_ptr < res_end);
+ boundary_size = (unsigned long long)dma_get_seg_boundary(dev) + 1;
+ boundary_size = ALIGN(boundary_size, 1ULL << iovp_shift) >> iovp_shift;
+
+ BUG_ON(ioc->ibase & ~iovp_mask);
+ shift = ioc->ibase >> iovp_shift;
+
spin_lock_irqsave(&ioc->res_lock, flags);
/* Allow caller to force a search through the entire resource space */
@@ -504,9 +522,7 @@
if (likely(*res_ptr != ~0UL)) {
bitshiftcnt = ffz(*res_ptr);
*res_ptr |= (1UL << bitshiftcnt);
- pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
- pide <<= 3; /* convert to bit address */
- pide += bitshiftcnt;
+ pide = ptr_to_pide(ioc, res_ptr, bitshiftcnt);
ioc->res_bitshift = bitshiftcnt + bits_wanted;
goto found_it;
}
@@ -535,11 +551,13 @@
DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
ASSERT(0 != mask);
for (; mask ; mask <<= o, bitshiftcnt += o) {
- if(0 == ((*res_ptr) & mask)) {
+ tpide = ptr_to_pide(ioc, res_ptr, bitshiftcnt);
+ ret = iommu_is_span_boundary(tpide, bits_wanted,
+ shift,
+ boundary_size);
+ if ((0 == ((*res_ptr) & mask)) && !ret) {
*res_ptr |= mask; /* mark resources busy! */
- pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
- pide <<= 3; /* convert to bit address */
- pide += bitshiftcnt;
+ pide = tpide;
ioc->res_bitshift = bitshiftcnt + bits_wanted;
goto found_it;
}
@@ -560,6 +578,11 @@
end = res_end - qwords;
for (; res_ptr < end; res_ptr++) {
+ tpide = ptr_to_pide(ioc, res_ptr, 0);
+ ret = iommu_is_span_boundary(tpide, bits_wanted,
+ shift, boundary_size);
+ if (ret)
+ goto next_ptr;
for (i = 0 ; i < qwords ; i++) {
if (res_ptr[i] != 0)
goto next_ptr;
@@ -572,8 +595,7 @@
res_ptr[i] = ~0UL;
res_ptr[i] |= RESMAP_MASK(bits);
- pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
- pide <<= 3; /* convert to bit address */
+ pide = tpide;
res_ptr += qwords;
ioc->res_bitshift = bits;
goto found_it;
@@ -605,7 +627,7 @@
* resource bit map.
*/
static int
-sba_alloc_range(struct ioc *ioc, size_t size)
+sba_alloc_range(struct ioc *ioc, struct device *dev, size_t size)
{
unsigned int pages_needed = size >> iovp_shift;
#ifdef PDIR_SEARCH_TIMING
@@ -622,9 +644,9 @@
/*
** "seek and ye shall find"...praying never hurts either...
*/
- pide = sba_search_bitmap(ioc, pages_needed, 1);
+ pide = sba_search_bitmap(ioc, dev, pages_needed, 1);
if (unlikely(pide >= (ioc->res_size << 3))) {
- pide = sba_search_bitmap(ioc, pages_needed, 0);
+ pide = sba_search_bitmap(ioc, dev, pages_needed, 0);
if (unlikely(pide >= (ioc->res_size << 3))) {
#if DELAYED_RESOURCE_CNT > 0
unsigned long flags;
@@ -653,7 +675,7 @@
}
spin_unlock_irqrestore(&ioc->saved_lock, flags);
- pide = sba_search_bitmap(ioc, pages_needed, 0);
+ pide = sba_search_bitmap(ioc, dev, pages_needed, 0);
if (unlikely(pide >= (ioc->res_size << 3)))
panic(__FILE__ ": I/O MMU @ %p is out of mapping resources\n",
ioc->ioc_hpa);
@@ -936,7 +958,7 @@
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
- pide = sba_alloc_range(ioc, size);
+ pide = sba_alloc_range(ioc, dev, size);
iovp = (dma_addr_t) pide << iovp_shift;
@@ -1373,7 +1395,7 @@
dma_len = (dma_len + dma_offset + ~iovp_mask) & iovp_mask;
ASSERT(dma_len <= DMA_CHUNK_SIZE);
dma_sg->dma_address = (dma_addr_t) (PIDE_FLAG
- | (sba_alloc_range(ioc, dma_len) << iovp_shift)
+ | (sba_alloc_range(ioc, dev, dma_len) << iovp_shift)
| dma_offset);
n_mappings++;
}
diff --git a/arch/ia64/ia32/elfcore32.h b/arch/ia64/ia32/elfcore32.h
index 446c9aa..9a3abf5 100644
--- a/arch/ia64/ia32/elfcore32.h
+++ b/arch/ia64/ia32/elfcore32.h
@@ -30,7 +30,19 @@
int si_errno; /* errno */
};
-#define jiffies_to_timeval(a,b) do { (b)->tv_usec = 0; (b)->tv_sec = (a)/HZ; }while(0)
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+/*
+ * Hacks are here since types between compat_timeval (= pair of s32) and
+ * ia64-native timeval (= pair of s64) are not compatible, at least a file
+ * arch/ia64/ia32/../../../fs/binfmt_elf.c will get warnings from compiler on
+ * use of cputime_to_timeval(), which usually an alias of jiffies_to_timeval().
+ */
+#define cputime_to_timeval(a,b) \
+ do { (b)->tv_usec = 0; (b)->tv_sec = (a)/NSEC_PER_SEC; } while(0)
+#else
+#define jiffies_to_timeval(a,b) \
+ do { (b)->tv_usec = 0; (b)->tv_sec = (a)/HZ; } while(0)
+#endif
struct elf_prstatus
{
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index b1bf51fe..7e028ce 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -38,6 +38,7 @@
#include <linux/eventpoll.h>
#include <linux/personality.h>
#include <linux/ptrace.h>
+#include <linux/regset.h>
#include <linux/stat.h>
#include <linux/ipc.h>
#include <linux/capability.h>
@@ -2387,16 +2388,45 @@
return -ESRCH;
}
+static void set_tls_desc(struct task_struct *p, int idx,
+ const struct ia32_user_desc *info, int n)
+{
+ struct thread_struct *t = &p->thread;
+ struct desc_struct *desc = &t->tls_array[idx - GDT_ENTRY_TLS_MIN];
+ int cpu;
+
+ /*
+ * We must not get preempted while modifying the TLS.
+ */
+ cpu = get_cpu();
+
+ while (n-- > 0) {
+ if (LDT_empty(info)) {
+ desc->a = 0;
+ desc->b = 0;
+ } else {
+ desc->a = LDT_entry_a(info);
+ desc->b = LDT_entry_b(info);
+ }
+
+ ++info;
+ ++desc;
+ }
+
+ if (t == ¤t->thread)
+ load_TLS(t, cpu);
+
+ put_cpu();
+}
+
/*
* Set a given TLS descriptor:
*/
asmlinkage int
sys32_set_thread_area (struct ia32_user_desc __user *u_info)
{
- struct thread_struct *t = ¤t->thread;
struct ia32_user_desc info;
- struct desc_struct *desc;
- int cpu, idx;
+ int idx;
if (copy_from_user(&info, u_info, sizeof(info)))
return -EFAULT;
@@ -2416,18 +2446,7 @@
if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
return -EINVAL;
- desc = t->tls_array + idx - GDT_ENTRY_TLS_MIN;
-
- cpu = smp_processor_id();
-
- if (LDT_empty(&info)) {
- desc->a = 0;
- desc->b = 0;
- } else {
- desc->a = LDT_entry_a(&info);
- desc->b = LDT_entry_b(&info);
- }
- load_TLS(t, cpu);
+ set_tls_desc(current, idx, &info, 1);
return 0;
}
@@ -2451,6 +2470,20 @@
#define GET_PRESENT(desc) (((desc)->b >> 15) & 1)
#define GET_USEABLE(desc) (((desc)->b >> 20) & 1)
+static void fill_user_desc(struct ia32_user_desc *info, int idx,
+ const struct desc_struct *desc)
+{
+ info->entry_number = idx;
+ info->base_addr = GET_BASE(desc);
+ info->limit = GET_LIMIT(desc);
+ info->seg_32bit = GET_32BIT(desc);
+ info->contents = GET_CONTENTS(desc);
+ info->read_exec_only = !GET_WRITABLE(desc);
+ info->limit_in_pages = GET_LIMIT_PAGES(desc);
+ info->seg_not_present = !GET_PRESENT(desc);
+ info->useable = GET_USEABLE(desc);
+}
+
asmlinkage int
sys32_get_thread_area (struct ia32_user_desc __user *u_info)
{
@@ -2464,22 +2497,588 @@
return -EINVAL;
desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
-
- info.entry_number = idx;
- info.base_addr = GET_BASE(desc);
- info.limit = GET_LIMIT(desc);
- info.seg_32bit = GET_32BIT(desc);
- info.contents = GET_CONTENTS(desc);
- info.read_exec_only = !GET_WRITABLE(desc);
- info.limit_in_pages = GET_LIMIT_PAGES(desc);
- info.seg_not_present = !GET_PRESENT(desc);
- info.useable = GET_USEABLE(desc);
+ fill_user_desc(&info, idx, desc);
if (copy_to_user(u_info, &info, sizeof(info)))
return -EFAULT;
return 0;
}
+struct regset_get {
+ void *kbuf;
+ void __user *ubuf;
+};
+
+struct regset_set {
+ const void *kbuf;
+ const void __user *ubuf;
+};
+
+struct regset_getset {
+ struct task_struct *target;
+ const struct user_regset *regset;
+ union {
+ struct regset_get get;
+ struct regset_set set;
+ } u;
+ unsigned int pos;
+ unsigned int count;
+ int ret;
+};
+
+static void getfpreg(struct task_struct *task, int regno, int *val)
+{
+ switch (regno / sizeof(int)) {
+ case 0:
+ *val = task->thread.fcr & 0xffff;
+ break;
+ case 1:
+ *val = task->thread.fsr & 0xffff;
+ break;
+ case 2:
+ *val = (task->thread.fsr>>16) & 0xffff;
+ break;
+ case 3:
+ *val = task->thread.fir;
+ break;
+ case 4:
+ *val = (task->thread.fir>>32) & 0xffff;
+ break;
+ case 5:
+ *val = task->thread.fdr;
+ break;
+ case 6:
+ *val = (task->thread.fdr >> 32) & 0xffff;
+ break;
+ }
+}
+
+static void setfpreg(struct task_struct *task, int regno, int val)
+{
+ switch (regno / sizeof(int)) {
+ case 0:
+ task->thread.fcr = (task->thread.fcr & (~0x1f3f))
+ | (val & 0x1f3f);
+ break;
+ case 1:
+ task->thread.fsr = (task->thread.fsr & (~0xffff)) | val;
+ break;
+ case 2:
+ task->thread.fsr = (task->thread.fsr & (~0xffff0000))
+ | (val << 16);
+ break;
+ case 3:
+ task->thread.fir = (task->thread.fir & (~0xffffffff)) | val;
+ break;
+ case 5:
+ task->thread.fdr = (task->thread.fdr & (~0xffffffff)) | val;
+ break;
+ }
+}
+
+static void access_fpreg_ia32(int regno, void *reg,
+ struct pt_regs *pt, struct switch_stack *sw,
+ int tos, int write)
+{
+ void *f;
+
+ if ((regno += tos) >= 8)
+ regno -= 8;
+ if (regno < 4)
+ f = &pt->f8 + regno;
+ else if (regno <= 7)
+ f = &sw->f12 + (regno - 4);
+ else {
+ printk(KERN_ERR "regno must be less than 7 \n");
+ return;
+ }
+
+ if (write)
+ memcpy(f, reg, sizeof(struct _fpreg_ia32));
+ else
+ memcpy(reg, f, sizeof(struct _fpreg_ia32));
+}
+
+static void do_fpregs_get(struct unw_frame_info *info, void *arg)
+{
+ struct regset_getset *dst = arg;
+ struct task_struct *task = dst->target;
+ struct pt_regs *pt;
+ int start, end, tos;
+ char buf[80];
+
+ if (dst->count == 0 || unw_unwind_to_user(info) < 0)
+ return;
+ if (dst->pos < 7 * sizeof(int)) {
+ end = min((dst->pos + dst->count),
+ (unsigned int)(7 * sizeof(int)));
+ for (start = dst->pos; start < end; start += sizeof(int))
+ getfpreg(task, start, (int *)(buf + start));
+ dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf, buf,
+ 0, 7 * sizeof(int));
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+ if (dst->pos < sizeof(struct ia32_user_i387_struct)) {
+ pt = task_pt_regs(task);
+ tos = (task->thread.fsr >> 11) & 7;
+ end = min(dst->pos + dst->count,
+ (unsigned int)(sizeof(struct ia32_user_i387_struct)));
+ start = (dst->pos - 7 * sizeof(int)) /
+ sizeof(struct _fpreg_ia32);
+ end = (end - 7 * sizeof(int)) / sizeof(struct _fpreg_ia32);
+ for (; start < end; start++)
+ access_fpreg_ia32(start,
+ (struct _fpreg_ia32 *)buf + start,
+ pt, info->sw, tos, 0);
+ dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf,
+ buf, 7 * sizeof(int),
+ sizeof(struct ia32_user_i387_struct));
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+}
+
+static void do_fpregs_set(struct unw_frame_info *info, void *arg)
+{
+ struct regset_getset *dst = arg;
+ struct task_struct *task = dst->target;
+ struct pt_regs *pt;
+ char buf[80];
+ int end, start, tos;
+
+ if (dst->count == 0 || unw_unwind_to_user(info) < 0)
+ return;
+
+ if (dst->pos < 7 * sizeof(int)) {
+ start = dst->pos;
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf, &dst->u.set.ubuf, buf,
+ 0, 7 * sizeof(int));
+ if (dst->ret)
+ return;
+ for (; start < dst->pos; start += sizeof(int))
+ setfpreg(task, start, *((int *)(buf + start)));
+ if (dst->count == 0)
+ return;
+ }
+ if (dst->pos < sizeof(struct ia32_user_i387_struct)) {
+ start = (dst->pos - 7 * sizeof(int)) /
+ sizeof(struct _fpreg_ia32);
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf, &dst->u.set.ubuf,
+ buf, 7 * sizeof(int),
+ sizeof(struct ia32_user_i387_struct));
+ if (dst->ret)
+ return;
+ pt = task_pt_regs(task);
+ tos = (task->thread.fsr >> 11) & 7;
+ end = (dst->pos - 7 * sizeof(int)) / sizeof(struct _fpreg_ia32);
+ for (; start < end; start++)
+ access_fpreg_ia32(start,
+ (struct _fpreg_ia32 *)buf + start,
+ pt, info->sw, tos, 1);
+ if (dst->count == 0)
+ return;
+ }
+}
+
+#define OFFSET(member) ((int)(offsetof(struct ia32_user_fxsr_struct, member)))
+static void getfpxreg(struct task_struct *task, int start, int end, char *buf)
+{
+ int min_val;
+
+ min_val = min(end, OFFSET(fop));
+ while (start < min_val) {
+ if (start == OFFSET(cwd))
+ *((short *)buf) = task->thread.fcr & 0xffff;
+ else if (start == OFFSET(swd))
+ *((short *)buf) = task->thread.fsr & 0xffff;
+ else if (start == OFFSET(twd))
+ *((short *)buf) = (task->thread.fsr>>16) & 0xffff;
+ buf += 2;
+ start += 2;
+ }
+ /* skip fop element */
+ if (start == OFFSET(fop)) {
+ start += 2;
+ buf += 2;
+ }
+ while (start < end) {
+ if (start == OFFSET(fip))
+ *((int *)buf) = task->thread.fir;
+ else if (start == OFFSET(fcs))
+ *((int *)buf) = (task->thread.fir>>32) & 0xffff;
+ else if (start == OFFSET(foo))
+ *((int *)buf) = task->thread.fdr;
+ else if (start == OFFSET(fos))
+ *((int *)buf) = (task->thread.fdr>>32) & 0xffff;
+ else if (start == OFFSET(mxcsr))
+ *((int *)buf) = ((task->thread.fcr>>32) & 0xff80)
+ | ((task->thread.fsr>>32) & 0x3f);
+ buf += 4;
+ start += 4;
+ }
+}
+
+static void setfpxreg(struct task_struct *task, int start, int end, char *buf)
+{
+ int min_val, num32;
+ short num;
+ unsigned long num64;
+
+ min_val = min(end, OFFSET(fop));
+ while (start < min_val) {
+ num = *((short *)buf);
+ if (start == OFFSET(cwd)) {
+ task->thread.fcr = (task->thread.fcr & (~0x1f3f))
+ | (num & 0x1f3f);
+ } else if (start == OFFSET(swd)) {
+ task->thread.fsr = (task->thread.fsr & (~0xffff)) | num;
+ } else if (start == OFFSET(twd)) {
+ task->thread.fsr = (task->thread.fsr & (~0xffff0000))
+ | (((int)num) << 16);
+ }
+ buf += 2;
+ start += 2;
+ }
+ /* skip fop element */
+ if (start == OFFSET(fop)) {
+ start += 2;
+ buf += 2;
+ }
+ while (start < end) {
+ num32 = *((int *)buf);
+ if (start == OFFSET(fip))
+ task->thread.fir = (task->thread.fir & (~0xffffffff))
+ | num32;
+ else if (start == OFFSET(foo))
+ task->thread.fdr = (task->thread.fdr & (~0xffffffff))
+ | num32;
+ else if (start == OFFSET(mxcsr)) {
+ num64 = num32 & 0xff10;
+ task->thread.fcr = (task->thread.fcr &
+ (~0xff1000000000UL)) | (num64<<32);
+ num64 = num32 & 0x3f;
+ task->thread.fsr = (task->thread.fsr &
+ (~0x3f00000000UL)) | (num64<<32);
+ }
+ buf += 4;
+ start += 4;
+ }
+}
+
+static void do_fpxregs_get(struct unw_frame_info *info, void *arg)
+{
+ struct regset_getset *dst = arg;
+ struct task_struct *task = dst->target;
+ struct pt_regs *pt;
+ char buf[128];
+ int start, end, tos;
+
+ if (dst->count == 0 || unw_unwind_to_user(info) < 0)
+ return;
+ if (dst->pos < OFFSET(st_space[0])) {
+ end = min(dst->pos + dst->count, (unsigned int)32);
+ getfpxreg(task, dst->pos, end, buf);
+ dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf, buf,
+ 0, OFFSET(st_space[0]));
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+ if (dst->pos < OFFSET(xmm_space[0])) {
+ pt = task_pt_regs(task);
+ tos = (task->thread.fsr >> 11) & 7;
+ end = min(dst->pos + dst->count,
+ (unsigned int)OFFSET(xmm_space[0]));
+ start = (dst->pos - OFFSET(st_space[0])) / 16;
+ end = (end - OFFSET(st_space[0])) / 16;
+ for (; start < end; start++)
+ access_fpreg_ia32(start, buf + 16 * start, pt,
+ info->sw, tos, 0);
+ dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf,
+ buf, OFFSET(st_space[0]), OFFSET(xmm_space[0]));
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+ if (dst->pos < OFFSET(padding[0]))
+ dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf,
+ &info->sw->f16, OFFSET(xmm_space[0]),
+ OFFSET(padding[0]));
+}
+
+static void do_fpxregs_set(struct unw_frame_info *info, void *arg)
+{
+ struct regset_getset *dst = arg;
+ struct task_struct *task = dst->target;
+ char buf[128];
+ int start, end;
+
+ if (dst->count == 0 || unw_unwind_to_user(info) < 0)
+ return;
+
+ if (dst->pos < OFFSET(st_space[0])) {
+ start = dst->pos;
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf, &dst->u.set.ubuf,
+ buf, 0, OFFSET(st_space[0]));
+ if (dst->ret)
+ return;
+ setfpxreg(task, start, dst->pos, buf);
+ if (dst->count == 0)
+ return;
+ }
+ if (dst->pos < OFFSET(xmm_space[0])) {
+ struct pt_regs *pt;
+ int tos;
+ pt = task_pt_regs(task);
+ tos = (task->thread.fsr >> 11) & 7;
+ start = (dst->pos - OFFSET(st_space[0])) / 16;
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf, &dst->u.set.ubuf,
+ buf, OFFSET(st_space[0]), OFFSET(xmm_space[0]));
+ if (dst->ret)
+ return;
+ end = (dst->pos - OFFSET(st_space[0])) / 16;
+ for (; start < end; start++)
+ access_fpreg_ia32(start, buf + 16 * start, pt, info->sw,
+ tos, 1);
+ if (dst->count == 0)
+ return;
+ }
+ if (dst->pos < OFFSET(padding[0]))
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf, &dst->u.set.ubuf,
+ &info->sw->f16, OFFSET(xmm_space[0]),
+ OFFSET(padding[0]));
+}
+#undef OFFSET
+
+static int do_regset_call(void (*call)(struct unw_frame_info *, void *),
+ struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ struct regset_getset info = { .target = target, .regset = regset,
+ .pos = pos, .count = count,
+ .u.set = { .kbuf = kbuf, .ubuf = ubuf },
+ .ret = 0 };
+
+ if (target == current)
+ unw_init_running(call, &info);
+ else {
+ struct unw_frame_info ufi;
+ memset(&ufi, 0, sizeof(ufi));
+ unw_init_from_blocked_task(&ufi, target);
+ (*call)(&ufi, &info);
+ }
+
+ return info.ret;
+}
+
+static int ia32_fpregs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ return do_regset_call(do_fpregs_get, target, regset, pos, count,
+ kbuf, ubuf);
+}
+
+static int ia32_fpregs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return do_regset_call(do_fpregs_set, target, regset, pos, count,
+ kbuf, ubuf);
+}
+
+static int ia32_fpxregs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ return do_regset_call(do_fpxregs_get, target, regset, pos, count,
+ kbuf, ubuf);
+}
+
+static int ia32_fpxregs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return do_regset_call(do_fpxregs_set, target, regset, pos, count,
+ kbuf, ubuf);
+}
+
+static int ia32_genregs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ if (kbuf) {
+ u32 *kp = kbuf;
+ while (count > 0) {
+ *kp++ = getreg(target, pos);
+ pos += 4;
+ count -= 4;
+ }
+ } else {
+ u32 __user *up = ubuf;
+ while (count > 0) {
+ if (__put_user(getreg(target, pos), up++))
+ return -EFAULT;
+ pos += 4;
+ count -= 4;
+ }
+ }
+ return 0;
+}
+
+static int ia32_genregs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int ret = 0;
+
+ if (kbuf) {
+ const u32 *kp = kbuf;
+ while (!ret && count > 0) {
+ putreg(target, pos, *kp++);
+ pos += 4;
+ count -= 4;
+ }
+ } else {
+ const u32 __user *up = ubuf;
+ u32 val;
+ while (!ret && count > 0) {
+ ret = __get_user(val, up++);
+ if (!ret)
+ putreg(target, pos, val);
+ pos += 4;
+ count -= 4;
+ }
+ }
+ return ret;
+}
+
+static int ia32_tls_active(struct task_struct *target,
+ const struct user_regset *regset)
+{
+ struct thread_struct *t = &target->thread;
+ int n = GDT_ENTRY_TLS_ENTRIES;
+ while (n > 0 && desc_empty(&t->tls_array[n -1]))
+ --n;
+ return n;
+}
+
+static int ia32_tls_get(struct task_struct *target,
+ const struct user_regset *regset, unsigned int pos,
+ unsigned int count, void *kbuf, void __user *ubuf)
+{
+ const struct desc_struct *tls;
+
+ if (pos > GDT_ENTRY_TLS_ENTRIES * sizeof(struct ia32_user_desc) ||
+ (pos % sizeof(struct ia32_user_desc)) != 0 ||
+ (count % sizeof(struct ia32_user_desc)) != 0)
+ return -EINVAL;
+
+ pos /= sizeof(struct ia32_user_desc);
+ count /= sizeof(struct ia32_user_desc);
+
+ tls = &target->thread.tls_array[pos];
+
+ if (kbuf) {
+ struct ia32_user_desc *info = kbuf;
+ while (count-- > 0)
+ fill_user_desc(info++, GDT_ENTRY_TLS_MIN + pos++,
+ tls++);
+ } else {
+ struct ia32_user_desc __user *u_info = ubuf;
+ while (count-- > 0) {
+ struct ia32_user_desc info;
+ fill_user_desc(&info, GDT_ENTRY_TLS_MIN + pos++, tls++);
+ if (__copy_to_user(u_info++, &info, sizeof(info)))
+ return -EFAULT;
+ }
+ }
+
+ return 0;
+}
+
+static int ia32_tls_set(struct task_struct *target,
+ const struct user_regset *regset, unsigned int pos,
+ unsigned int count, const void *kbuf, const void __user *ubuf)
+{
+ struct ia32_user_desc infobuf[GDT_ENTRY_TLS_ENTRIES];
+ const struct ia32_user_desc *info;
+
+ if (pos > GDT_ENTRY_TLS_ENTRIES * sizeof(struct ia32_user_desc) ||
+ (pos % sizeof(struct ia32_user_desc)) != 0 ||
+ (count % sizeof(struct ia32_user_desc)) != 0)
+ return -EINVAL;
+
+ if (kbuf)
+ info = kbuf;
+ else if (__copy_from_user(infobuf, ubuf, count))
+ return -EFAULT;
+ else
+ info = infobuf;
+
+ set_tls_desc(target,
+ GDT_ENTRY_TLS_MIN + (pos / sizeof(struct ia32_user_desc)),
+ info, count / sizeof(struct ia32_user_desc));
+
+ return 0;
+}
+
+/*
+ * This should match arch/i386/kernel/ptrace.c:native_regsets.
+ * XXX ioperm? vm86?
+ */
+static const struct user_regset ia32_regsets[] = {
+ {
+ .core_note_type = NT_PRSTATUS,
+ .n = sizeof(struct user_regs_struct32)/4,
+ .size = 4, .align = 4,
+ .get = ia32_genregs_get, .set = ia32_genregs_set
+ },
+ {
+ .core_note_type = NT_PRFPREG,
+ .n = sizeof(struct ia32_user_i387_struct) / 4,
+ .size = 4, .align = 4,
+ .get = ia32_fpregs_get, .set = ia32_fpregs_set
+ },
+ {
+ .core_note_type = NT_PRXFPREG,
+ .n = sizeof(struct ia32_user_fxsr_struct) / 4,
+ .size = 4, .align = 4,
+ .get = ia32_fpxregs_get, .set = ia32_fpxregs_set
+ },
+ {
+ .core_note_type = NT_386_TLS,
+ .n = GDT_ENTRY_TLS_ENTRIES,
+ .bias = GDT_ENTRY_TLS_MIN,
+ .size = sizeof(struct ia32_user_desc),
+ .align = sizeof(struct ia32_user_desc),
+ .active = ia32_tls_active,
+ .get = ia32_tls_get, .set = ia32_tls_set,
+ },
+};
+
+const struct user_regset_view user_ia32_view = {
+ .name = "i386", .e_machine = EM_386,
+ .regsets = ia32_regsets, .n = ARRAY_SIZE(ia32_regsets)
+};
+
long sys32_fadvise64_64(int fd, __u32 offset_low, __u32 offset_high,
__u32 len_low, __u32 len_high, int advice)
{
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 33e5a59..13fd10e 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -6,7 +6,7 @@
obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o \
irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o \
- salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
+ salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
unwind.o mca.o mca_asm.o topology.o
obj-$(CONFIG_IA64_BRL_EMU) += brl_emu.o
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 78f28d8..c7467f8 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -423,6 +423,7 @@
#define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag))
#define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag))
static struct acpi_table_slit __initdata *slit_table;
+cpumask_t early_cpu_possible_map = CPU_MASK_NONE;
static int get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa)
{
@@ -482,6 +483,7 @@
(pa->apic_id << 8) | (pa->local_sapic_eid);
/* nid should be overridden as logical node id later */
node_cpuid[srat_num_cpus].nid = pxm;
+ cpu_set(srat_num_cpus, early_cpu_possible_map);
srat_num_cpus++;
}
@@ -559,7 +561,7 @@
}
/* set logical node id in cpu structure */
- for (i = 0; i < srat_num_cpus; i++)
+ for_each_possible_early_cpu(i)
node_cpuid[i].nid = pxm_to_node(node_cpuid[i].nid);
printk(KERN_INFO "Number of logical nodes in system = %d\n",
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index 0aebc6f..230a6f9 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -7,6 +7,7 @@
#define ASM_OFFSETS_C 1
#include <linux/sched.h>
+#include <linux/pid.h>
#include <linux/clocksource.h>
#include <asm-ia64/processor.h>
@@ -34,17 +35,29 @@
DEFINE(SIGFRAME_SIZE, sizeof (struct sigframe));
DEFINE(UNW_FRAME_INFO_SIZE, sizeof (struct unw_frame_info));
+ BUILD_BUG_ON(sizeof(struct upid) != 32);
+ DEFINE(IA64_UPID_SHIFT, 5);
+
BLANK();
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ DEFINE(TI_AC_STAMP, offsetof(struct thread_info, ac_stamp));
+ DEFINE(TI_AC_LEAVE, offsetof(struct thread_info, ac_leave));
+ DEFINE(TI_AC_STIME, offsetof(struct thread_info, ac_stime));
+ DEFINE(TI_AC_UTIME, offsetof(struct thread_info, ac_utime));
+#endif
BLANK();
DEFINE(IA64_TASK_BLOCKED_OFFSET,offsetof (struct task_struct, blocked));
DEFINE(IA64_TASK_CLEAR_CHILD_TID_OFFSET,offsetof (struct task_struct, clear_child_tid));
DEFINE(IA64_TASK_GROUP_LEADER_OFFSET, offsetof (struct task_struct, group_leader));
+ DEFINE(IA64_TASK_TGIDLINK_OFFSET, offsetof (struct task_struct, pids[PIDTYPE_PID].pid));
+ DEFINE(IA64_PID_LEVEL_OFFSET, offsetof (struct pid, level));
+ DEFINE(IA64_PID_UPID_OFFSET, offsetof (struct pid, numbers[0]));
DEFINE(IA64_TASK_PENDING_OFFSET,offsetof (struct task_struct, pending));
DEFINE(IA64_TASK_PID_OFFSET, offsetof (struct task_struct, pid));
DEFINE(IA64_TASK_REAL_PARENT_OFFSET, offsetof (struct task_struct, real_parent));
diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index fbe742a..90ef338 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -24,6 +24,7 @@
static atomic_t kdump_cpu_frozen;
atomic_t kdump_in_progress;
static int kdump_on_init = 1;
+static int kdump_on_fatal_mca = 1;
static inline Elf64_Word
*append_elf_note(Elf64_Word *buf, char *name, unsigned type, void *data,
@@ -118,6 +119,7 @@
static void
machine_kdump_on_init(void)
{
+ crash_save_vmcoreinfo();
local_irq_disable();
kexec_disable_iosapic();
machine_kexec(ia64_kimage);
@@ -148,7 +150,7 @@
struct ia64_mca_notify_die *nd;
struct die_args *args = data;
- if (!kdump_on_init)
+ if (!kdump_on_init && !kdump_on_fatal_mca)
return NOTIFY_DONE;
if (!ia64_kimage) {
@@ -173,32 +175,38 @@
return NOTIFY_DONE;
switch (val) {
- case DIE_INIT_MONARCH_PROCESS:
+ case DIE_INIT_MONARCH_PROCESS:
+ if (kdump_on_init) {
atomic_set(&kdump_in_progress, 1);
*(nd->monarch_cpu) = -1;
- break;
- case DIE_INIT_MONARCH_LEAVE:
+ }
+ break;
+ case DIE_INIT_MONARCH_LEAVE:
+ if (kdump_on_init)
machine_kdump_on_init();
- break;
- case DIE_INIT_SLAVE_LEAVE:
- if (atomic_read(&kdump_in_progress))
- unw_init_running(kdump_cpu_freeze, NULL);
- break;
- case DIE_MCA_RENDZVOUS_LEAVE:
- if (atomic_read(&kdump_in_progress))
- unw_init_running(kdump_cpu_freeze, NULL);
- break;
- case DIE_MCA_MONARCH_LEAVE:
- /* die_register->signr indicate if MCA is recoverable */
- if (!args->signr)
- machine_kdump_on_init();
- break;
+ break;
+ case DIE_INIT_SLAVE_LEAVE:
+ if (atomic_read(&kdump_in_progress))
+ unw_init_running(kdump_cpu_freeze, NULL);
+ break;
+ case DIE_MCA_RENDZVOUS_LEAVE:
+ if (atomic_read(&kdump_in_progress))
+ unw_init_running(kdump_cpu_freeze, NULL);
+ break;
+ case DIE_MCA_MONARCH_LEAVE:
+ /* die_register->signr indicate if MCA is recoverable */
+ if (kdump_on_fatal_mca && !args->signr) {
+ atomic_set(&kdump_in_progress, 1);
+ *(nd->monarch_cpu) = -1;
+ machine_kdump_on_init();
+ }
+ break;
}
return NOTIFY_DONE;
}
#ifdef CONFIG_SYSCTL
-static ctl_table kdump_on_init_table[] = {
+static ctl_table kdump_ctl_table[] = {
{
.ctl_name = CTL_UNNUMBERED,
.procname = "kdump_on_init",
@@ -207,6 +215,14 @@
.mode = 0644,
.proc_handler = &proc_dointvec,
},
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "kdump_on_fatal_mca",
+ .data = &kdump_on_fatal_mca,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
{ .ctl_name = 0 }
};
@@ -215,7 +231,7 @@
.ctl_name = CTL_KERN,
.procname = "kernel",
.mode = 0555,
- .child = kdump_on_init_table,
+ .child = kdump_ctl_table,
},
{ .ctl_name = 0 }
};
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 728d724..d45f215 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -37,6 +37,7 @@
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/mca.h>
+#include <asm/tlbflush.h>
#define EFI_DEBUG 0
@@ -403,6 +404,41 @@
return NULL;
}
+
+static u8 __init palo_checksum(u8 *buffer, u32 length)
+{
+ u8 sum = 0;
+ u8 *end = buffer + length;
+
+ while (buffer < end)
+ sum = (u8) (sum + *(buffer++));
+
+ return sum;
+}
+
+/*
+ * Parse and handle PALO table which is published at:
+ * http://www.dig64.org/home/DIG64_PALO_R1_0.pdf
+ */
+static void __init handle_palo(unsigned long palo_phys)
+{
+ struct palo_table *palo = __va(palo_phys);
+ u8 checksum;
+
+ if (strncmp(palo->signature, PALO_SIG, sizeof(PALO_SIG) - 1)) {
+ printk(KERN_INFO "PALO signature incorrect.\n");
+ return;
+ }
+
+ checksum = palo_checksum((u8 *)palo, palo->length);
+ if (checksum) {
+ printk(KERN_INFO "PALO checksum incorrect.\n");
+ return;
+ }
+
+ setup_ptcg_sem(palo->max_tlb_purges, NPTCG_FROM_PALO);
+}
+
void
efi_map_pal_code (void)
{
@@ -432,6 +468,7 @@
u64 efi_desc_size;
char *cp, vendor[100] = "unknown";
int i;
+ unsigned long palo_phys;
/*
* It's too early to be able to use the standard kernel command line
@@ -496,6 +533,8 @@
efi.hcdp = EFI_INVALID_TABLE_ADDR;
efi.uga = EFI_INVALID_TABLE_ADDR;
+ palo_phys = EFI_INVALID_TABLE_ADDR;
+
for (i = 0; i < (int) efi.systab->nr_tables; i++) {
if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) {
efi.mps = config_tables[i].table;
@@ -515,10 +554,17 @@
} else if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) {
efi.hcdp = config_tables[i].table;
printk(" HCDP=0x%lx", config_tables[i].table);
+ } else if (efi_guidcmp(config_tables[i].guid,
+ PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID) == 0) {
+ palo_phys = config_tables[i].table;
+ printk(" PALO=0x%lx", config_tables[i].table);
}
}
printk("\n");
+ if (palo_phys != EFI_INVALID_TABLE_ADDR)
+ handle_palo(palo_phys);
+
runtime = __va(efi.systab->runtime);
efi.get_time = phys_get_time;
efi.set_time = phys_set_time;
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 3c331c4..b0be4a2 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -710,6 +710,16 @@
(pUStk) cmp.eq.unc p6,p0=r0,r0 // p6 <- pUStk
#endif
.work_processed_syscall:
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ adds r2=PT(LOADRS)+16,r12
+(pUStk) mov.m r22=ar.itc // fetch time at leave
+ adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
+ ;;
+(p6) ld4 r31=[r18] // load current_thread_info()->flags
+ ld8 r19=[r2],PT(B6)-PT(LOADRS) // load ar.rsc value for "loadrs"
+ adds r3=PT(AR_BSPSTORE)+16,r12 // deferred
+ ;;
+#else
adds r2=PT(LOADRS)+16,r12
adds r3=PT(AR_BSPSTORE)+16,r12
adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
@@ -718,6 +728,7 @@
ld8 r19=[r2],PT(B6)-PT(LOADRS) // load ar.rsc value for "loadrs"
nop.i 0
;;
+#endif
mov r16=ar.bsp // M2 get existing backing store pointer
ld8 r18=[r2],PT(R9)-PT(B6) // load b6
(p6) and r15=TIF_WORK_MASK,r31 // any work other than TIF_SYSCALL_TRACE?
@@ -737,12 +748,21 @@
ld8 r29=[r2],16 // M0|1 load cr.ipsr
ld8 r28=[r3],16 // M0|1 load cr.iip
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+(pUStk) add r14=TI_AC_LEAVE+IA64_TASK_SIZE,r13
+ ;;
+ ld8 r30=[r2],16 // M0|1 load cr.ifs
+ ld8 r25=[r3],16 // M0|1 load ar.unat
+(pUStk) add r15=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
+ ;;
+#else
mov r22=r0 // A clear r22
;;
ld8 r30=[r2],16 // M0|1 load cr.ifs
ld8 r25=[r3],16 // M0|1 load ar.unat
(pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
;;
+#endif
ld8 r26=[r2],PT(B0)-PT(AR_PFS) // M0|1 load ar.pfs
(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
nop 0
@@ -759,7 +779,11 @@
ld8.fill r1=[r3],16 // M0|1 load r1
(pUStk) mov r17=1 // A
;;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+(pUStk) st1 [r15]=r17 // M2|3
+#else
(pUStk) st1 [r14]=r17 // M2|3
+#endif
ld8.fill r13=[r3],16 // M0|1
mov f8=f0 // F clear f8
;;
@@ -775,12 +799,22 @@
shr.u r18=r19,16 // I0|1 get byte size of existing "dirty" partition
cover // B add current frame into dirty partition & set cr.ifs
;;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ mov r19=ar.bsp // M2 get new backing store pointer
+ st8 [r14]=r22 // M save time at leave
+ mov f10=f0 // F clear f10
+
+ mov r22=r0 // A clear r22
+ movl r14=__kernel_syscall_via_epc // X
+ ;;
+#else
mov r19=ar.bsp // M2 get new backing store pointer
mov f10=f0 // F clear f10
nop.m 0
movl r14=__kernel_syscall_via_epc // X
;;
+#endif
mov.m ar.csd=r0 // M2 clear ar.csd
mov.m ar.ccv=r0 // M2 clear ar.ccv
mov b7=r14 // I0 clear b7 (hint with __kernel_syscall_via_epc)
@@ -913,10 +947,18 @@
adds r16=PT(CR_IPSR)+16,r12
adds r17=PT(CR_IIP)+16,r12
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ .pred.rel.mutex pUStk,pKStk
+(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
+(pUStk) mov.m r22=ar.itc // M fetch time at leave
+ nop.i 0
+ ;;
+#else
(pKStk) mov r22=psr // M2 read PSR now that interrupts are disabled
nop.i 0
nop.i 0
;;
+#endif
ld8 r29=[r16],16 // load cr.ipsr
ld8 r28=[r17],16 // load cr.iip
;;
@@ -938,15 +980,37 @@
;;
ld8.fill r12=[r16],16
ld8.fill r13=[r17],16
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+(pUStk) adds r3=TI_AC_LEAVE+IA64_TASK_SIZE,r18
+#else
(pUStk) adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18
+#endif
;;
ld8 r20=[r16],16 // ar.fpsr
ld8.fill r15=[r17],16
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+(pUStk) adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18 // deferred
+#endif
;;
ld8.fill r14=[r16],16
ld8.fill r2=[r17]
(pUStk) mov r17=1
;;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ // mmi_ : ld8 st1 shr;; mmi_ : st8 st1 shr;;
+ // mib : mov add br -> mib : ld8 add br
+ // bbb_ : br nop cover;; mbb_ : mov br cover;;
+ //
+ // no one require bsp in r16 if (pKStk) branch is selected.
+(pUStk) st8 [r3]=r22 // save time at leave
+(pUStk) st1 [r18]=r17 // restore current->thread.on_ustack
+ shr.u r18=r19,16 // get byte size of existing "dirty" partition
+ ;;
+ ld8.fill r3=[r16] // deferred
+ LOAD_PHYS_STACK_REG_SIZE(r17)
+(pKStk) br.cond.dpnt skip_rbs_switch
+ mov r16=ar.bsp // get existing backing store pointer
+#else
ld8.fill r3=[r16]
(pUStk) st1 [r18]=r17 // restore current->thread.on_ustack
shr.u r18=r19,16 // get byte size of existing "dirty" partition
@@ -954,6 +1018,7 @@
mov r16=ar.bsp // get existing backing store pointer
LOAD_PHYS_STACK_REG_SIZE(r17)
(pKStk) br.cond.dpnt skip_rbs_switch
+#endif
/*
* Restore user backing store.
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 4484197..c1625c7 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -61,13 +61,29 @@
.prologue
.altrp b6
.body
+ add r17=IA64_TASK_GROUP_LEADER_OFFSET,r16
+ ;;
+ ld8 r17=[r17] // r17 = current->group_leader
add r9=TI_FLAGS+IA64_TASK_SIZE,r16
;;
ld4 r9=[r9]
- add r8=IA64_TASK_TGID_OFFSET,r16
+ add r17=IA64_TASK_TGIDLINK_OFFSET,r17
;;
and r9=TIF_ALLWORK_MASK,r9
- ld4 r8=[r8] // r8 = current->tgid
+ ld8 r17=[r17] // r17 = current->group_leader->pids[PIDTYPE_PID].pid
+ ;;
+ add r8=IA64_PID_LEVEL_OFFSET,r17
+ ;;
+ ld4 r8=[r8] // r8 = pid->level
+ add r17=IA64_PID_UPID_OFFSET,r17 // r17 = &pid->numbers[0]
+ ;;
+ shl r8=r8,IA64_UPID_SHIFT
+ ;;
+ add r17=r17,r8 // r17 = &pid->numbers[pid->level]
+ ;;
+ ld4 r8=[r17] // r8 = pid->numbers[pid->level].nr
+ ;;
+ mov r17=0
;;
cmp.ne p8,p0=0,r9
(p8) br.spnt.many fsys_fallback_syscall
@@ -126,15 +142,25 @@
.altrp b6
.body
add r9=TI_FLAGS+IA64_TASK_SIZE,r16
+ add r17=IA64_TASK_TGIDLINK_OFFSET,r16
;;
ld4 r9=[r9]
tnat.z p6,p7=r32 // check argument register for being NaT
+ ld8 r17=[r17] // r17 = current->pids[PIDTYPE_PID].pid
;;
and r9=TIF_ALLWORK_MASK,r9
- add r8=IA64_TASK_PID_OFFSET,r16
+ add r8=IA64_PID_LEVEL_OFFSET,r17
add r18=IA64_TASK_CLEAR_CHILD_TID_OFFSET,r16
;;
- ld4 r8=[r8]
+ ld4 r8=[r8] // r8 = pid->level
+ add r17=IA64_PID_UPID_OFFSET,r17 // r17 = &pid->numbers[0]
+ ;;
+ shl r8=r8,IA64_UPID_SHIFT
+ ;;
+ add r17=r17,r8 // r17 = &pid->numbers[pid->level]
+ ;;
+ ld4 r8=[r17] // r8 = pid->numbers[pid->level].nr
+ ;;
cmp.ne p8,p0=0,r9
mov r17=-1
;;
@@ -210,27 +236,25 @@
// Note that instructions are optimized for McKinley. McKinley can
// process two bundles simultaneously and therefore we continuously
// try to feed the CPU two bundles and then a stop.
- //
- // Additional note that code has changed a lot. Optimization is TBD.
- // Comments begin with "?" are maybe outdated.
- tnat.nz p6,p0 = r31 // ? branch deferred to fit later bundle
- mov pr = r30,0xc000 // Set predicates according to function
+
add r2 = TI_FLAGS+IA64_TASK_SIZE,r16
+ tnat.nz p6,p0 = r31 // guard against Nat argument
+(p6) br.cond.spnt.few .fail_einval
movl r20 = fsyscall_gtod_data // load fsyscall gettimeofday data address
;;
+ ld4 r2 = [r2] // process work pending flags
movl r29 = itc_jitter_data // itc_jitter
add r22 = IA64_GTOD_WALL_TIME_OFFSET,r20 // wall_time
- ld4 r2 = [r2] // process work pending flags
- ;;
-(p15) add r22 = IA64_GTOD_MONO_TIME_OFFSET,r20 // monotonic_time
add r21 = IA64_CLKSRC_MMIO_OFFSET,r20
- add r19 = IA64_ITC_LASTCYCLE_OFFSET,r29
- and r2 = TIF_ALLWORK_MASK,r2
-(p6) br.cond.spnt.few .fail_einval // ? deferred branch
+ mov pr = r30,0xc000 // Set predicates according to function
;;
- add r26 = IA64_CLKSRC_CYCLE_LAST_OFFSET,r20 // clksrc_cycle_last
+ and r2 = TIF_ALLWORK_MASK,r2
+ add r19 = IA64_ITC_LASTCYCLE_OFFSET,r29
+(p15) add r22 = IA64_GTOD_MONO_TIME_OFFSET,r20 // monotonic_time
+ ;;
+ add r26 = IA64_CLKSRC_CYCLE_LAST_OFFSET,r20 // clksrc_cycle_last
cmp.ne p6, p0 = 0, r2 // Fallback if work is scheduled
-(p6) br.cond.spnt.many fsys_fallback_syscall
+(p6) br.cond.spnt.many fsys_fallback_syscall
;;
// Begin critical section
.time_redo:
@@ -258,7 +282,6 @@
(p8) mov r2 = ar.itc // CPU_TIMER. 36 clocks latency!!!
(p9) ld8 r2 = [r30] // MMIO_TIMER. Could also have latency issues..
(p13) ld8 r25 = [r19] // get itc_lastcycle value
- ;; // ? could be removed by moving the last add upward
ld8 r9 = [r22],IA64_TIMESPEC_TV_NSEC_OFFSET // tv_sec
;;
ld8 r8 = [r22],-IA64_TIMESPEC_TV_NSEC_OFFSET // tv_nsec
@@ -285,13 +308,12 @@
EX(.fail_efault, probe.w.fault r31, 3)
xmpy.l f8 = f8,f7 // nsec_per_cyc*(counter-last_counter)
;;
- // ? simulate tbit.nz.or p7,p0 = r28,0
getf.sig r2 = f8
mf
;;
ld4 r10 = [r20] // gtod_lock.sequence
shr.u r2 = r2,r23 // shift by factor
- ;; // ? overloaded 3 bundles!
+ ;;
add r8 = r8,r2 // Add xtime.nsecs
cmp4.ne p7,p0 = r28,r10
(p7) br.cond.dpnt.few .time_redo // sequence number changed, redo
@@ -319,9 +341,9 @@
EX(.fail_efault, probe.w.fault r23, 3) // This also costs 5 cycles
(p14) xmpy.hu f8 = f8, f7 // xmpy has 5 cycles latency so use it
;;
- mov r8 = r0
(p14) getf.sig r2 = f8
;;
+ mov r8 = r0
(p14) shr.u r21 = r2, 4
;;
EX(.fail_efault, st8 [r31] = r9)
@@ -660,7 +682,11 @@
nop.i 0
;;
mov ar.rsc=0 // M2 set enforced lazy mode, pl 0, LE, loadrs=0
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ mov.m r30=ar.itc // M get cycle for accounting
+#else
nop.m 0
+#endif
nop.i 0
;;
mov r23=ar.bspstore // M2 (12 cyc) save ar.bspstore
@@ -682,6 +708,28 @@
cmp.ne pKStk,pUStk=r0,r0 // A set pKStk <- 0, pUStk <- 1
br.call.sptk.many b7=ia64_syscall_setup // B
;;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ // mov.m r30=ar.itc is called in advance
+ add r16=TI_AC_STAMP+IA64_TASK_SIZE,r2
+ add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r2
+ ;;
+ ld8 r18=[r16],TI_AC_STIME-TI_AC_STAMP // time at last check in kernel
+ ld8 r19=[r17],TI_AC_UTIME-TI_AC_LEAVE // time at leave kernel
+ ;;
+ ld8 r20=[r16],TI_AC_STAMP-TI_AC_STIME // cumulated stime
+ ld8 r21=[r17] // cumulated utime
+ sub r22=r19,r18 // stime before leave kernel
+ ;;
+ st8 [r16]=r30,TI_AC_STIME-TI_AC_STAMP // update stamp
+ sub r18=r30,r19 // elapsed time in user mode
+ ;;
+ add r20=r20,r22 // sum stime
+ add r21=r21,r18 // sum utime
+ ;;
+ st8 [r16]=r20 // update stime
+ st8 [r17]=r21 // update utime
+ ;;
+#endif
mov ar.rsc=0x3 // M2 set eager mode, pl 0, LE, loadrs=0
mov rp=r14 // I0 set the real return addr
and r3=_TIF_SYSCALL_TRACEAUDIT,r3 // A
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index d3a41d5..ddeab4e 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -1002,6 +1002,26 @@
br.ret.sptk.many rp
END(sched_clock)
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+GLOBAL_ENTRY(cycle_to_cputime)
+ alloc r16=ar.pfs,1,0,0,0
+ addl r8=THIS_CPU(cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0
+ ;;
+ ldf8 f8=[r8]
+ ;;
+ setf.sig f9=r32
+ ;;
+ xmpy.lu f10=f9,f8 // calculate low 64 bits of 128-bit product (4 cyc)
+ xmpy.hu f11=f9,f8 // calculate high 64 bits of 128-bit product
+ ;;
+ getf.sig r8=f10 // (5 cyc)
+ getf.sig r9=f11
+ ;;
+ shrp r8=r9,r8,IA64_NSEC_PER_CYC_SHIFT
+ br.ret.sptk.many rp
+END(cycle_to_cputime)
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+
GLOBAL_ENTRY(start_kernel_thread)
.prologue
.save rp, r0 // this is the end of the call-chain
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 8e7193d..6da1f20 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -19,12 +19,6 @@
EXPORT_SYMBOL(ip_fast_csum); /* hand-coded assembly */
EXPORT_SYMBOL(csum_ipv6_magic);
-#include <asm/semaphore.h>
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__down_trylock);
-EXPORT_SYMBOL(__up);
-
#include <asm/page.h>
EXPORT_SYMBOL(clear_page);
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index d8be23f..5538471 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -472,7 +472,7 @@
static unsigned char count;
static long last_time;
- if (jiffies - last_time > 5*HZ)
+ if (time_after(jiffies, last_time + 5 * HZ))
count = 0;
if (++count < 5) {
last_time = jiffies;
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 34f44d8..6678c49 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -805,8 +805,13 @@
(p8) adds r28=16,r28 // A switch cr.iip to next bundle
(p9) adds r8=1,r8 // A increment ei to next slot
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ ;;
+ mov b6=r30 // I0 setup syscall handler branch reg early
+#else
nop.i 0
;;
+#endif
mov.m r25=ar.unat // M2 (5 cyc)
dep r29=r8,r29,41,2 // I0 insert new ei into cr.ipsr
@@ -817,7 +822,11 @@
//
///////////////////////////////////////////////////////////////////////
st1 [r16]=r0 // M2|3 clear current->thread.on_ustack flag
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ mov.m r30=ar.itc // M get cycle for accounting
+#else
mov b6=r30 // I0 setup syscall handler branch reg early
+#endif
cmp.eq pKStk,pUStk=r0,r17 // A were we on kernel stacks already?
and r9=_TIF_SYSCALL_TRACEAUDIT,r9 // A mask trace or audit
@@ -829,6 +838,30 @@
cmp.eq p14,p0=r9,r0 // A are syscalls being traced/audited?
br.call.sptk.many b7=ia64_syscall_setup // B
1:
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ // mov.m r30=ar.itc is called in advance, and r13 is current
+ add r16=TI_AC_STAMP+IA64_TASK_SIZE,r13 // A
+ add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r13 // A
+(pKStk) br.cond.spnt .skip_accounting // B unlikely skip
+ ;;
+ ld8 r18=[r16],TI_AC_STIME-TI_AC_STAMP // M get last stamp
+ ld8 r19=[r17],TI_AC_UTIME-TI_AC_LEAVE // M time at leave
+ ;;
+ ld8 r20=[r16],TI_AC_STAMP-TI_AC_STIME // M cumulated stime
+ ld8 r21=[r17] // M cumulated utime
+ sub r22=r19,r18 // A stime before leave
+ ;;
+ st8 [r16]=r30,TI_AC_STIME-TI_AC_STAMP // M update stamp
+ sub r18=r30,r19 // A elapsed time in user
+ ;;
+ add r20=r20,r22 // A sum stime
+ add r21=r21,r18 // A sum utime
+ ;;
+ st8 [r16]=r20 // M update stime
+ st8 [r17]=r21 // M update utime
+ ;;
+.skip_accounting:
+#endif
mov ar.rsc=0x3 // M2 set eager mode, pl 0, LE, loadrs=0
nop 0
bsw.1 // B (6 cyc) regs are saved, switch to bank 1
@@ -928,6 +961,7 @@
* - r27: saved ar.rsc
* - r28: saved cr.iip
* - r29: saved cr.ipsr
+ * - r30: ar.itc for accounting (don't touch)
* - r31: saved pr
* - b0: original contents (to be saved)
* On exit:
@@ -1090,6 +1124,41 @@
DBG_FAULT(16)
FAULT(16)
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ /*
+ * There is no particular reason for this code to be here, other than
+ * that there happens to be space here that would go unused otherwise.
+ * If this fault ever gets "unreserved", simply moved the following
+ * code to a more suitable spot...
+ *
+ * account_sys_enter is called from SAVE_MIN* macros if accounting is
+ * enabled and if the macro is entered from user mode.
+ */
+ENTRY(account_sys_enter)
+ // mov.m r20=ar.itc is called in advance, and r13 is current
+ add r16=TI_AC_STAMP+IA64_TASK_SIZE,r13
+ add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r13
+ ;;
+ ld8 r18=[r16],TI_AC_STIME-TI_AC_STAMP // time at last check in kernel
+ ld8 r19=[r17],TI_AC_UTIME-TI_AC_LEAVE // time at left from kernel
+ ;;
+ ld8 r23=[r16],TI_AC_STAMP-TI_AC_STIME // cumulated stime
+ ld8 r21=[r17] // cumulated utime
+ sub r22=r19,r18 // stime before leave kernel
+ ;;
+ st8 [r16]=r20,TI_AC_STIME-TI_AC_STAMP // update stamp
+ sub r18=r20,r19 // elapsed time in user mode
+ ;;
+ add r23=r23,r22 // sum stime
+ add r21=r21,r18 // sum utime
+ ;;
+ st8 [r16]=r23 // update stime
+ st8 [r17]=r21 // update utime
+ ;;
+ br.ret.sptk.many rp
+END(account_sys_enter)
+#endif
+
.org ia64_ivt+0x4400
/////////////////////////////////////////////////////////////////////////////////////////
// 0x4400 Entry 17 (size 64 bundles) Reserved
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 8d9a446..233434f 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -78,6 +78,20 @@
{ u, u, u }, /* 1F */
};
+/* Insert a long branch code */
+static void __kprobes set_brl_inst(void *from, void *to)
+{
+ s64 rel = ((s64) to - (s64) from) >> 4;
+ bundle_t *brl;
+ brl = (bundle_t *) ((u64) from & ~0xf);
+ brl->quad0.template = 0x05; /* [MLX](stop) */
+ brl->quad0.slot0 = NOP_M_INST; /* nop.m 0x0 */
+ brl->quad0.slot1_p0 = ((rel >> 20) & 0x7fffffffff) << 2;
+ brl->quad1.slot1_p1 = (((rel >> 20) & 0x7fffffffff) << 2) >> (64 - 46);
+ /* brl.cond.sptk.many.clr rel<<4 (qp=0) */
+ brl->quad1.slot2 = BRL_INST(rel >> 59, rel & 0xfffff);
+}
+
/*
* In this function we check to see if the instruction
* is IP relative instruction and update the kprobe
@@ -496,6 +510,77 @@
regs->b0 = ((struct fnptr *)kretprobe_trampoline)->ip;
}
+/* Check the instruction in the slot is break */
+static int __kprobes __is_ia64_break_inst(bundle_t *bundle, uint slot)
+{
+ unsigned int major_opcode;
+ unsigned int template = bundle->quad0.template;
+ unsigned long kprobe_inst;
+
+ /* Move to slot 2, if bundle is MLX type and kprobe slot is 1 */
+ if (slot == 1 && bundle_encoding[template][1] == L)
+ slot++;
+
+ /* Get Kprobe probe instruction at given slot*/
+ get_kprobe_inst(bundle, slot, &kprobe_inst, &major_opcode);
+
+ /* For break instruction,
+ * Bits 37:40 Major opcode to be zero
+ * Bits 27:32 X6 to be zero
+ * Bits 32:35 X3 to be zero
+ */
+ if (major_opcode || ((kprobe_inst >> 27) & 0x1FF)) {
+ /* Not a break instruction */
+ return 0;
+ }
+
+ /* Is a break instruction */
+ return 1;
+}
+
+/*
+ * In this function, we check whether the target bundle modifies IP or
+ * it triggers an exception. If so, it cannot be boostable.
+ */
+static int __kprobes can_boost(bundle_t *bundle, uint slot,
+ unsigned long bundle_addr)
+{
+ unsigned int template = bundle->quad0.template;
+
+ do {
+ if (search_exception_tables(bundle_addr + slot) ||
+ __is_ia64_break_inst(bundle, slot))
+ return 0; /* exception may occur in this bundle*/
+ } while ((++slot) < 3);
+ template &= 0x1e;
+ if (template >= 0x10 /* including B unit */ ||
+ template == 0x04 /* including X unit */ ||
+ template == 0x06) /* undefined */
+ return 0;
+
+ return 1;
+}
+
+/* Prepare long jump bundle and disables other boosters if need */
+static void __kprobes prepare_booster(struct kprobe *p)
+{
+ unsigned long addr = (unsigned long)p->addr & ~0xFULL;
+ unsigned int slot = (unsigned long)p->addr & 0xf;
+ struct kprobe *other_kp;
+
+ if (can_boost(&p->ainsn.insn[0].bundle, slot, addr)) {
+ set_brl_inst(&p->ainsn.insn[1].bundle, (bundle_t *)addr + 1);
+ p->ainsn.inst_flag |= INST_FLAG_BOOSTABLE;
+ }
+
+ /* disables boosters in previous slots */
+ for (; addr < (unsigned long)p->addr; addr++) {
+ other_kp = get_kprobe((void *)addr);
+ if (other_kp)
+ other_kp->ainsn.inst_flag &= ~INST_FLAG_BOOSTABLE;
+ }
+}
+
int __kprobes arch_prepare_kprobe(struct kprobe *p)
{
unsigned long addr = (unsigned long) p->addr;
@@ -530,6 +615,8 @@
prepare_break_inst(template, slot, major_opcode, kprobe_inst, p, qp);
+ prepare_booster(p);
+
return 0;
}
@@ -543,7 +630,9 @@
src = &p->opcode.bundle;
flush_icache_range((unsigned long)p->ainsn.insn,
- (unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t));
+ (unsigned long)p->ainsn.insn +
+ sizeof(kprobe_opcode_t) * MAX_INSN_SIZE);
+
switch (p->ainsn.slot) {
case 0:
dest->quad0.slot0 = src->quad0.slot0;
@@ -584,13 +673,13 @@
void __kprobes arch_remove_kprobe(struct kprobe *p)
{
mutex_lock(&kprobe_mutex);
- free_insn_slot(p->ainsn.insn, 0);
+ free_insn_slot(p->ainsn.insn, p->ainsn.inst_flag & INST_FLAG_BOOSTABLE);
mutex_unlock(&kprobe_mutex);
}
/*
* We are resuming execution after a single step fault, so the pt_regs
* structure reflects the register state after we executed the instruction
- * located in the kprobe (p->ainsn.insn.bundle). We still need to adjust
+ * located in the kprobe (p->ainsn.insn->bundle). We still need to adjust
* the ip to point back to the original stack address. To set the IP address
* to original stack address, handle the case where we need to fixup the
* relative IP address and/or fixup branch register.
@@ -607,7 +696,7 @@
if (slot == 1 && bundle_encoding[template][1] == L)
slot = 2;
- if (p->ainsn.inst_flag) {
+ if (p->ainsn.inst_flag & ~INST_FLAG_BOOSTABLE) {
if (p->ainsn.inst_flag & INST_FLAG_FIX_RELATIVE_IP_ADDR) {
/* Fix relative IP address */
@@ -686,33 +775,12 @@
static int __kprobes is_ia64_break_inst(struct pt_regs *regs)
{
unsigned int slot = ia64_psr(regs)->ri;
- unsigned int template, major_opcode;
- unsigned long kprobe_inst;
unsigned long *kprobe_addr = (unsigned long *)regs->cr_iip;
bundle_t bundle;
memcpy(&bundle, kprobe_addr, sizeof(bundle_t));
- template = bundle.quad0.template;
- /* Move to slot 2, if bundle is MLX type and kprobe slot is 1 */
- if (slot == 1 && bundle_encoding[template][1] == L)
- slot++;
-
- /* Get Kprobe probe instruction at given slot*/
- get_kprobe_inst(&bundle, slot, &kprobe_inst, &major_opcode);
-
- /* For break instruction,
- * Bits 37:40 Major opcode to be zero
- * Bits 27:32 X6 to be zero
- * Bits 32:35 X3 to be zero
- */
- if (major_opcode || ((kprobe_inst >> 27) & 0x1FF) ) {
- /* Not a break instruction */
- return 0;
- }
-
- /* Is a break instruction */
- return 1;
+ return __is_ia64_break_inst(&bundle, slot);
}
static int __kprobes pre_kprobes_handler(struct die_args *args)
@@ -802,6 +870,19 @@
return 1;
ss_probe:
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
+ if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
+ /* Boost up -- we can execute copied instructions directly */
+ ia64_psr(regs)->ri = p->ainsn.slot;
+ regs->cr_iip = (unsigned long)&p->ainsn.insn->bundle & ~0xFULL;
+ /* turn single stepping off */
+ ia64_psr(regs)->ss = 0;
+
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ return 1;
+ }
+#endif
prepare_ss(p, regs);
kcb->kprobe_status = KPROBE_HIT_SS;
return 1;
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 6c18221..e51bced 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -69,6 +69,7 @@
* 2007-04-27 Russ Anderson <rja@sgi.com>
* Support multiple cpus going through OS_MCA in the same event.
*/
+#include <linux/jiffies.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/sched.h>
@@ -97,6 +98,7 @@
#include <asm/irq.h>
#include <asm/hw_irq.h>
+#include <asm/tlb.h>
#include "mca_drv.h"
#include "entry.h"
@@ -112,6 +114,7 @@
DEFINE_PER_CPU(u64, ia64_mca_per_cpu_pte); /* PTE to map per-CPU area */
DEFINE_PER_CPU(u64, ia64_mca_pal_pte); /* PTE to map PAL code */
DEFINE_PER_CPU(u64, ia64_mca_pal_base); /* vaddr PAL code granule */
+DEFINE_PER_CPU(u64, ia64_mca_tr_reload); /* Flag for TR reload */
unsigned long __per_cpu_mca[NR_CPUS];
@@ -293,7 +296,8 @@
if (mlogbuf_finished)
return;
- if (mlogbuf_timestamp && (mlogbuf_timestamp + 30*HZ > jiffies)) {
+ if (mlogbuf_timestamp &&
+ time_before(jiffies, mlogbuf_timestamp + 30 * HZ)) {
printk(KERN_ERR "INIT: mlogbuf_dump is interrupted by INIT "
" and the system seems to be messed up.\n");
ia64_mlogbuf_finish(0);
@@ -1182,6 +1186,49 @@
return;
}
+/* mca_insert_tr
+ *
+ * Switch rid when TR reload and needed!
+ * iord: 1: itr, 2: itr;
+ *
+*/
+static void mca_insert_tr(u64 iord)
+{
+
+ int i;
+ u64 old_rr;
+ struct ia64_tr_entry *p;
+ unsigned long psr;
+ int cpu = smp_processor_id();
+
+ psr = ia64_clear_ic();
+ for (i = IA64_TR_ALLOC_BASE; i < IA64_TR_ALLOC_MAX; i++) {
+ p = &__per_cpu_idtrs[cpu][iord-1][i];
+ if (p->pte & 0x1) {
+ old_rr = ia64_get_rr(p->ifa);
+ if (old_rr != p->rr) {
+ ia64_set_rr(p->ifa, p->rr);
+ ia64_srlz_d();
+ }
+ ia64_ptr(iord, p->ifa, p->itir >> 2);
+ ia64_srlz_i();
+ if (iord & 0x1) {
+ ia64_itr(0x1, i, p->ifa, p->pte, p->itir >> 2);
+ ia64_srlz_i();
+ }
+ if (iord & 0x2) {
+ ia64_itr(0x2, i, p->ifa, p->pte, p->itir >> 2);
+ ia64_srlz_i();
+ }
+ if (old_rr != p->rr) {
+ ia64_set_rr(p->ifa, old_rr);
+ ia64_srlz_d();
+ }
+ }
+ }
+ ia64_set_psr(psr);
+}
+
/*
* ia64_mca_handler
*
@@ -1266,16 +1313,17 @@
} else {
/* Dump buffered message to console */
ia64_mlogbuf_finish(1);
-#ifdef CONFIG_KEXEC
- atomic_set(&kdump_in_progress, 1);
- monarch_cpu = -1;
-#endif
}
+
+ if (__get_cpu_var(ia64_mca_tr_reload)) {
+ mca_insert_tr(0x1); /*Reload dynamic itrs*/
+ mca_insert_tr(0x2); /*Reload dynamic itrs*/
+ }
+
if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, (long)&nd, 0, recover)
== NOTIFY_STOP)
ia64_mca_spin(__func__);
-
if (atomic_dec_return(&mca_count) > 0) {
int i;
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index 8bc7d25..a06d465 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -219,8 +219,13 @@
mov r20=IA64_TR_CURRENT_STACK
;;
itr.d dtr[r20]=r16
+ GET_THIS_PADDR(r2, ia64_mca_tr_reload)
+ mov r18 = 1
;;
srlz.d
+ ;;
+ st8 [r2] =r18
+ ;;
done_tlb_purge_and_reload:
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index c9ac8ba..7c548ac 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -3,6 +3,18 @@
#include "entry.h"
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+/* read ar.itc in advance, and use it before leaving bank 0 */
+#define ACCOUNT_GET_STAMP \
+(pUStk) mov.m r20=ar.itc;
+#define ACCOUNT_SYS_ENTER \
+(pUStk) br.call.spnt rp=account_sys_enter \
+ ;;
+#else
+#define ACCOUNT_GET_STAMP
+#define ACCOUNT_SYS_ENTER
+#endif
+
/*
* DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
* the minimum state necessary that allows us to turn psr.ic back
@@ -122,11 +134,13 @@
;; \
.mem.offset 0,0; st8.spill [r16]=r2,16; \
.mem.offset 8,0; st8.spill [r17]=r3,16; \
+ ACCOUNT_GET_STAMP \
adds r2=IA64_PT_REGS_R16_OFFSET,r1; \
;; \
EXTRA; \
movl r1=__gp; /* establish kernel global pointer */ \
;; \
+ ACCOUNT_SYS_ENTER \
bsw.1; /* switch back to bank 1 (must be last in insn group) */ \
;;
diff --git a/arch/ia64/kernel/numa.c b/arch/ia64/kernel/numa.c
index a78b45f..c93420c 100644
--- a/arch/ia64/kernel/numa.c
+++ b/arch/ia64/kernel/numa.c
@@ -73,7 +73,7 @@
for(node=0; node < MAX_NUMNODES; node++)
cpus_clear(node_to_cpu_mask[node]);
- for(cpu = 0; cpu < NR_CPUS; ++cpu) {
+ for_each_possible_early_cpu(cpu) {
node = -1;
for (i = 0; i < NR_CPUS; ++i)
if (cpu_physical_id(cpu) == node_cpuid[i].phys_id) {
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index 2cb9425..e0dca87 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -135,10 +135,10 @@
while (offp < (s32 *) end) {
wp = (u64 *) ia64_imva((char *) offp + *offp);
- wp[0] = 0x0000000100000000UL; /* nop.m 0; nop.i 0; nop.i 0 */
- wp[1] = 0x0004000000000200UL;
- wp[2] = 0x0000000100000011UL; /* nop.m 0; nop.i 0; br.ret.sptk.many b6 */
- wp[3] = 0x0084006880000200UL;
+ wp[0] = 0x0000000100000011UL; /* nop.m 0; nop.i 0; br.ret.sptk.many b6 */
+ wp[1] = 0x0084006880000200UL;
+ wp[2] = 0x0000000100000000UL; /* nop.m 0; nop.i 0; nop.i 0 */
+ wp[3] = 0x0004000000000200UL;
ia64_fc(wp); ia64_fc(wp + 2);
++offp;
}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index a2aabfd..d1d24f4 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -4204,10 +4204,10 @@
do_each_thread (g, t) {
if (t->thread.pfm_context == ctx) {
ret = 0;
- break;
+ goto out;
}
} while_each_thread (g, t);
-
+out:
read_unlock(&tasklist_lock);
DPRINT(("pfm_check_task_exist: ret=%d ctx=%p\n", ret, ctx));
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 49937a3..a5ea817 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -625,21 +625,6 @@
do_dump_task_fpu(current, info, arg);
}
-int
-dump_task_regs(struct task_struct *task, elf_gregset_t *regs)
-{
- struct unw_frame_info tcore_info;
-
- if (current == task) {
- unw_init_running(do_copy_regs, regs);
- } else {
- memset(&tcore_info, 0, sizeof(tcore_info));
- unw_init_from_blocked_task(&tcore_info, task);
- do_copy_task_regs(task, &tcore_info, regs);
- }
- return 1;
-}
-
void
ia64_elf_core_copy_regs (struct pt_regs *pt, elf_gregset_t dst)
{
@@ -647,21 +632,6 @@
}
int
-dump_task_fpu (struct task_struct *task, elf_fpregset_t *dst)
-{
- struct unw_frame_info tcore_info;
-
- if (current == task) {
- unw_init_running(do_dump_fpu, dst);
- } else {
- memset(&tcore_info, 0, sizeof(tcore_info));
- unw_init_from_blocked_task(&tcore_info, task);
- do_dump_task_fpu(task, &tcore_info, dst);
- }
- return 1;
-}
-
-int
dump_fpu (struct pt_regs *pt, elf_fpregset_t dst)
{
unw_init_running(do_dump_fpu, dst);
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index ab784ec..2a9943b 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -3,6 +3,9 @@
*
* Copyright (C) 1999-2005 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2006 Intel Co
+ * 2006-08-12 - IA64 Native Utrace implementation support added by
+ * Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
*
* Derived from the x86 and Alpha versions.
*/
@@ -17,6 +20,8 @@
#include <linux/security.h>
#include <linux/audit.h>
#include <linux/signal.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
@@ -740,25 +745,6 @@
psr->dfh = 1;
}
-static int
-access_fr (struct unw_frame_info *info, int regnum, int hi,
- unsigned long *data, int write_access)
-{
- struct ia64_fpreg fpval;
- int ret;
-
- ret = unw_get_fr(info, regnum, &fpval);
- if (ret < 0)
- return ret;
-
- if (write_access) {
- fpval.u.bits[hi] = *data;
- ret = unw_set_fr(info, regnum, fpval);
- } else
- *data = fpval.u.bits[hi];
- return ret;
-}
-
/*
* Change the machine-state of CHILD such that it will return via the normal
* kernel exit-path, rather than the syscall-exit path.
@@ -860,309 +846,7 @@
static int
access_uarea (struct task_struct *child, unsigned long addr,
- unsigned long *data, int write_access)
-{
- unsigned long *ptr, regnum, urbs_end, cfm;
- struct switch_stack *sw;
- struct pt_regs *pt;
-# define pt_reg_addr(pt, reg) ((void *) \
- ((unsigned long) (pt) \
- + offsetof(struct pt_regs, reg)))
-
-
- pt = task_pt_regs(child);
- sw = (struct switch_stack *) (child->thread.ksp + 16);
-
- if ((addr & 0x7) != 0) {
- dprintk("ptrace: unaligned register address 0x%lx\n", addr);
- return -1;
- }
-
- if (addr < PT_F127 + 16) {
- /* accessing fph */
- if (write_access)
- ia64_sync_fph(child);
- else
- ia64_flush_fph(child);
- ptr = (unsigned long *)
- ((unsigned long) &child->thread.fph + addr);
- } else if ((addr >= PT_F10) && (addr < PT_F11 + 16)) {
- /* scratch registers untouched by kernel (saved in pt_regs) */
- ptr = pt_reg_addr(pt, f10) + (addr - PT_F10);
- } else if (addr >= PT_F12 && addr < PT_F15 + 16) {
- /*
- * Scratch registers untouched by kernel (saved in
- * switch_stack).
- */
- ptr = (unsigned long *) ((long) sw
- + (addr - PT_NAT_BITS - 32));
- } else if (addr < PT_AR_LC + 8) {
- /* preserved state: */
- struct unw_frame_info info;
- char nat = 0;
- int ret;
-
- unw_init_from_blocked_task(&info, child);
- if (unw_unwind_to_user(&info) < 0)
- return -1;
-
- switch (addr) {
- case PT_NAT_BITS:
- return access_nat_bits(child, pt, &info,
- data, write_access);
-
- case PT_R4: case PT_R5: case PT_R6: case PT_R7:
- if (write_access) {
- /* read NaT bit first: */
- unsigned long dummy;
-
- ret = unw_get_gr(&info, (addr - PT_R4)/8 + 4,
- &dummy, &nat);
- if (ret < 0)
- return ret;
- }
- return unw_access_gr(&info, (addr - PT_R4)/8 + 4, data,
- &nat, write_access);
-
- case PT_B1: case PT_B2: case PT_B3:
- case PT_B4: case PT_B5:
- return unw_access_br(&info, (addr - PT_B1)/8 + 1, data,
- write_access);
-
- case PT_AR_EC:
- return unw_access_ar(&info, UNW_AR_EC, data,
- write_access);
-
- case PT_AR_LC:
- return unw_access_ar(&info, UNW_AR_LC, data,
- write_access);
-
- default:
- if (addr >= PT_F2 && addr < PT_F5 + 16)
- return access_fr(&info, (addr - PT_F2)/16 + 2,
- (addr & 8) != 0, data,
- write_access);
- else if (addr >= PT_F16 && addr < PT_F31 + 16)
- return access_fr(&info,
- (addr - PT_F16)/16 + 16,
- (addr & 8) != 0,
- data, write_access);
- else {
- dprintk("ptrace: rejecting access to register "
- "address 0x%lx\n", addr);
- return -1;
- }
- }
- } else if (addr < PT_F9+16) {
- /* scratch state */
- switch (addr) {
- case PT_AR_BSP:
- /*
- * By convention, we use PT_AR_BSP to refer to
- * the end of the user-level backing store.
- * Use ia64_rse_skip_regs(PT_AR_BSP, -CFM.sof)
- * to get the real value of ar.bsp at the time
- * the kernel was entered.
- *
- * Furthermore, when changing the contents of
- * PT_AR_BSP (or PT_CFM) while the task is
- * blocked in a system call, convert the state
- * so that the non-system-call exit
- * path is used. This ensures that the proper
- * state will be picked up when resuming
- * execution. However, it *also* means that
- * once we write PT_AR_BSP/PT_CFM, it won't be
- * possible to modify the syscall arguments of
- * the pending system call any longer. This
- * shouldn't be an issue because modifying
- * PT_AR_BSP/PT_CFM generally implies that
- * we're either abandoning the pending system
- * call or that we defer it's re-execution
- * (e.g., due to GDB doing an inferior
- * function call).
- */
- urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
- if (write_access) {
- if (*data != urbs_end) {
- if (in_syscall(pt))
- convert_to_non_syscall(child,
- pt,
- cfm);
- /*
- * Simulate user-level write
- * of ar.bsp:
- */
- pt->loadrs = 0;
- pt->ar_bspstore = *data;
- }
- } else
- *data = urbs_end;
- return 0;
-
- case PT_CFM:
- urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
- if (write_access) {
- if (((cfm ^ *data) & PFM_MASK) != 0) {
- if (in_syscall(pt))
- convert_to_non_syscall(child,
- pt,
- cfm);
- pt->cr_ifs = ((pt->cr_ifs & ~PFM_MASK)
- | (*data & PFM_MASK));
- }
- } else
- *data = cfm;
- return 0;
-
- case PT_CR_IPSR:
- if (write_access) {
- unsigned long tmp = *data;
- /* psr.ri==3 is a reserved value: SDM 2:25 */
- if ((tmp & IA64_PSR_RI) == IA64_PSR_RI)
- tmp &= ~IA64_PSR_RI;
- pt->cr_ipsr = ((tmp & IPSR_MASK)
- | (pt->cr_ipsr & ~IPSR_MASK));
- } else
- *data = (pt->cr_ipsr & IPSR_MASK);
- return 0;
-
- case PT_AR_RSC:
- if (write_access)
- pt->ar_rsc = *data | (3 << 2); /* force PL3 */
- else
- *data = pt->ar_rsc;
- return 0;
-
- case PT_AR_RNAT:
- ptr = pt_reg_addr(pt, ar_rnat);
- break;
- case PT_R1:
- ptr = pt_reg_addr(pt, r1);
- break;
- case PT_R2: case PT_R3:
- ptr = pt_reg_addr(pt, r2) + (addr - PT_R2);
- break;
- case PT_R8: case PT_R9: case PT_R10: case PT_R11:
- ptr = pt_reg_addr(pt, r8) + (addr - PT_R8);
- break;
- case PT_R12: case PT_R13:
- ptr = pt_reg_addr(pt, r12) + (addr - PT_R12);
- break;
- case PT_R14:
- ptr = pt_reg_addr(pt, r14);
- break;
- case PT_R15:
- ptr = pt_reg_addr(pt, r15);
- break;
- case PT_R16: case PT_R17: case PT_R18: case PT_R19:
- case PT_R20: case PT_R21: case PT_R22: case PT_R23:
- case PT_R24: case PT_R25: case PT_R26: case PT_R27:
- case PT_R28: case PT_R29: case PT_R30: case PT_R31:
- ptr = pt_reg_addr(pt, r16) + (addr - PT_R16);
- break;
- case PT_B0:
- ptr = pt_reg_addr(pt, b0);
- break;
- case PT_B6:
- ptr = pt_reg_addr(pt, b6);
- break;
- case PT_B7:
- ptr = pt_reg_addr(pt, b7);
- break;
- case PT_F6: case PT_F6+8: case PT_F7: case PT_F7+8:
- case PT_F8: case PT_F8+8: case PT_F9: case PT_F9+8:
- ptr = pt_reg_addr(pt, f6) + (addr - PT_F6);
- break;
- case PT_AR_BSPSTORE:
- ptr = pt_reg_addr(pt, ar_bspstore);
- break;
- case PT_AR_UNAT:
- ptr = pt_reg_addr(pt, ar_unat);
- break;
- case PT_AR_PFS:
- ptr = pt_reg_addr(pt, ar_pfs);
- break;
- case PT_AR_CCV:
- ptr = pt_reg_addr(pt, ar_ccv);
- break;
- case PT_AR_FPSR:
- ptr = pt_reg_addr(pt, ar_fpsr);
- break;
- case PT_CR_IIP:
- ptr = pt_reg_addr(pt, cr_iip);
- break;
- case PT_PR:
- ptr = pt_reg_addr(pt, pr);
- break;
- /* scratch register */
-
- default:
- /* disallow accessing anything else... */
- dprintk("ptrace: rejecting access to register "
- "address 0x%lx\n", addr);
- return -1;
- }
- } else if (addr <= PT_AR_SSD) {
- ptr = pt_reg_addr(pt, ar_csd) + (addr - PT_AR_CSD);
- } else {
- /* access debug registers */
-
- if (addr >= PT_IBR) {
- regnum = (addr - PT_IBR) >> 3;
- ptr = &child->thread.ibr[0];
- } else {
- regnum = (addr - PT_DBR) >> 3;
- ptr = &child->thread.dbr[0];
- }
-
- if (regnum >= 8) {
- dprintk("ptrace: rejecting access to register "
- "address 0x%lx\n", addr);
- return -1;
- }
-#ifdef CONFIG_PERFMON
- /*
- * Check if debug registers are used by perfmon. This
- * test must be done once we know that we can do the
- * operation, i.e. the arguments are all valid, but
- * before we start modifying the state.
- *
- * Perfmon needs to keep a count of how many processes
- * are trying to modify the debug registers for system
- * wide monitoring sessions.
- *
- * We also include read access here, because they may
- * cause the PMU-installed debug register state
- * (dbr[], ibr[]) to be reset. The two arrays are also
- * used by perfmon, but we do not use
- * IA64_THREAD_DBG_VALID. The registers are restored
- * by the PMU context switch code.
- */
- if (pfm_use_debug_registers(child)) return -1;
-#endif
-
- if (!(child->thread.flags & IA64_THREAD_DBG_VALID)) {
- child->thread.flags |= IA64_THREAD_DBG_VALID;
- memset(child->thread.dbr, 0,
- sizeof(child->thread.dbr));
- memset(child->thread.ibr, 0,
- sizeof(child->thread.ibr));
- }
-
- ptr += regnum;
-
- if ((regnum & 1) && write_access) {
- /* don't let the user set kernel-level breakpoints: */
- *ptr = *data & ~(7UL << 56);
- return 0;
- }
- }
- if (write_access)
- *ptr = *data;
- else
- *data = *ptr;
- return 0;
-}
+ unsigned long *data, int write_access);
static long
ptrace_getregs (struct task_struct *child, struct pt_all_user_regs __user *ppr)
@@ -1626,3 +1310,892 @@
if (test_thread_flag(TIF_RESTORE_RSE))
ia64_sync_krbs();
}
+
+/* Utrace implementation starts here */
+struct regset_get {
+ void *kbuf;
+ void __user *ubuf;
+};
+
+struct regset_set {
+ const void *kbuf;
+ const void __user *ubuf;
+};
+
+struct regset_getset {
+ struct task_struct *target;
+ const struct user_regset *regset;
+ union {
+ struct regset_get get;
+ struct regset_set set;
+ } u;
+ unsigned int pos;
+ unsigned int count;
+ int ret;
+};
+
+static int
+access_elf_gpreg(struct task_struct *target, struct unw_frame_info *info,
+ unsigned long addr, unsigned long *data, int write_access)
+{
+ struct pt_regs *pt;
+ unsigned long *ptr = NULL;
+ int ret;
+ char nat = 0;
+
+ pt = task_pt_regs(target);
+ switch (addr) {
+ case ELF_GR_OFFSET(1):
+ ptr = &pt->r1;
+ break;
+ case ELF_GR_OFFSET(2):
+ case ELF_GR_OFFSET(3):
+ ptr = (void *)&pt->r2 + (addr - ELF_GR_OFFSET(2));
+ break;
+ case ELF_GR_OFFSET(4) ... ELF_GR_OFFSET(7):
+ if (write_access) {
+ /* read NaT bit first: */
+ unsigned long dummy;
+
+ ret = unw_get_gr(info, addr/8, &dummy, &nat);
+ if (ret < 0)
+ return ret;
+ }
+ return unw_access_gr(info, addr/8, data, &nat, write_access);
+ case ELF_GR_OFFSET(8) ... ELF_GR_OFFSET(11):
+ ptr = (void *)&pt->r8 + addr - ELF_GR_OFFSET(8);
+ break;
+ case ELF_GR_OFFSET(12):
+ case ELF_GR_OFFSET(13):
+ ptr = (void *)&pt->r12 + addr - ELF_GR_OFFSET(12);
+ break;
+ case ELF_GR_OFFSET(14):
+ ptr = &pt->r14;
+ break;
+ case ELF_GR_OFFSET(15):
+ ptr = &pt->r15;
+ }
+ if (write_access)
+ *ptr = *data;
+ else
+ *data = *ptr;
+ return 0;
+}
+
+static int
+access_elf_breg(struct task_struct *target, struct unw_frame_info *info,
+ unsigned long addr, unsigned long *data, int write_access)
+{
+ struct pt_regs *pt;
+ unsigned long *ptr = NULL;
+
+ pt = task_pt_regs(target);
+ switch (addr) {
+ case ELF_BR_OFFSET(0):
+ ptr = &pt->b0;
+ break;
+ case ELF_BR_OFFSET(1) ... ELF_BR_OFFSET(5):
+ return unw_access_br(info, (addr - ELF_BR_OFFSET(0))/8,
+ data, write_access);
+ case ELF_BR_OFFSET(6):
+ ptr = &pt->b6;
+ break;
+ case ELF_BR_OFFSET(7):
+ ptr = &pt->b7;
+ }
+ if (write_access)
+ *ptr = *data;
+ else
+ *data = *ptr;
+ return 0;
+}
+
+static int
+access_elf_areg(struct task_struct *target, struct unw_frame_info *info,
+ unsigned long addr, unsigned long *data, int write_access)
+{
+ struct pt_regs *pt;
+ unsigned long cfm, urbs_end;
+ unsigned long *ptr = NULL;
+
+ pt = task_pt_regs(target);
+ if (addr >= ELF_AR_RSC_OFFSET && addr <= ELF_AR_SSD_OFFSET) {
+ switch (addr) {
+ case ELF_AR_RSC_OFFSET:
+ /* force PL3 */
+ if (write_access)
+ pt->ar_rsc = *data | (3 << 2);
+ else
+ *data = pt->ar_rsc;
+ return 0;
+ case ELF_AR_BSP_OFFSET:
+ /*
+ * By convention, we use PT_AR_BSP to refer to
+ * the end of the user-level backing store.
+ * Use ia64_rse_skip_regs(PT_AR_BSP, -CFM.sof)
+ * to get the real value of ar.bsp at the time
+ * the kernel was entered.
+ *
+ * Furthermore, when changing the contents of
+ * PT_AR_BSP (or PT_CFM) while the task is
+ * blocked in a system call, convert the state
+ * so that the non-system-call exit
+ * path is used. This ensures that the proper
+ * state will be picked up when resuming
+ * execution. However, it *also* means that
+ * once we write PT_AR_BSP/PT_CFM, it won't be
+ * possible to modify the syscall arguments of
+ * the pending system call any longer. This
+ * shouldn't be an issue because modifying
+ * PT_AR_BSP/PT_CFM generally implies that
+ * we're either abandoning the pending system
+ * call or that we defer it's re-execution
+ * (e.g., due to GDB doing an inferior
+ * function call).
+ */
+ urbs_end = ia64_get_user_rbs_end(target, pt, &cfm);
+ if (write_access) {
+ if (*data != urbs_end) {
+ if (in_syscall(pt))
+ convert_to_non_syscall(target,
+ pt,
+ cfm);
+ /*
+ * Simulate user-level write
+ * of ar.bsp:
+ */
+ pt->loadrs = 0;
+ pt->ar_bspstore = *data;
+ }
+ } else
+ *data = urbs_end;
+ return 0;
+ case ELF_AR_BSPSTORE_OFFSET:
+ ptr = &pt->ar_bspstore;
+ break;
+ case ELF_AR_RNAT_OFFSET:
+ ptr = &pt->ar_rnat;
+ break;
+ case ELF_AR_CCV_OFFSET:
+ ptr = &pt->ar_ccv;
+ break;
+ case ELF_AR_UNAT_OFFSET:
+ ptr = &pt->ar_unat;
+ break;
+ case ELF_AR_FPSR_OFFSET:
+ ptr = &pt->ar_fpsr;
+ break;
+ case ELF_AR_PFS_OFFSET:
+ ptr = &pt->ar_pfs;
+ break;
+ case ELF_AR_LC_OFFSET:
+ return unw_access_ar(info, UNW_AR_LC, data,
+ write_access);
+ case ELF_AR_EC_OFFSET:
+ return unw_access_ar(info, UNW_AR_EC, data,
+ write_access);
+ case ELF_AR_CSD_OFFSET:
+ ptr = &pt->ar_csd;
+ break;
+ case ELF_AR_SSD_OFFSET:
+ ptr = &pt->ar_ssd;
+ }
+ } else if (addr >= ELF_CR_IIP_OFFSET && addr <= ELF_CR_IPSR_OFFSET) {
+ switch (addr) {
+ case ELF_CR_IIP_OFFSET:
+ ptr = &pt->cr_iip;
+ break;
+ case ELF_CFM_OFFSET:
+ urbs_end = ia64_get_user_rbs_end(target, pt, &cfm);
+ if (write_access) {
+ if (((cfm ^ *data) & PFM_MASK) != 0) {
+ if (in_syscall(pt))
+ convert_to_non_syscall(target,
+ pt,
+ cfm);
+ pt->cr_ifs = ((pt->cr_ifs & ~PFM_MASK)
+ | (*data & PFM_MASK));
+ }
+ } else
+ *data = cfm;
+ return 0;
+ case ELF_CR_IPSR_OFFSET:
+ if (write_access) {
+ unsigned long tmp = *data;
+ /* psr.ri==3 is a reserved value: SDM 2:25 */
+ if ((tmp & IA64_PSR_RI) == IA64_PSR_RI)
+ tmp &= ~IA64_PSR_RI;
+ pt->cr_ipsr = ((tmp & IPSR_MASK)
+ | (pt->cr_ipsr & ~IPSR_MASK));
+ } else
+ *data = (pt->cr_ipsr & IPSR_MASK);
+ return 0;
+ }
+ } else if (addr == ELF_NAT_OFFSET)
+ return access_nat_bits(target, pt, info,
+ data, write_access);
+ else if (addr == ELF_PR_OFFSET)
+ ptr = &pt->pr;
+ else
+ return -1;
+
+ if (write_access)
+ *ptr = *data;
+ else
+ *data = *ptr;
+
+ return 0;
+}
+
+static int
+access_elf_reg(struct task_struct *target, struct unw_frame_info *info,
+ unsigned long addr, unsigned long *data, int write_access)
+{
+ if (addr >= ELF_GR_OFFSET(1) && addr <= ELF_GR_OFFSET(15))
+ return access_elf_gpreg(target, info, addr, data, write_access);
+ else if (addr >= ELF_BR_OFFSET(0) && addr <= ELF_BR_OFFSET(7))
+ return access_elf_breg(target, info, addr, data, write_access);
+ else
+ return access_elf_areg(target, info, addr, data, write_access);
+}
+
+void do_gpregs_get(struct unw_frame_info *info, void *arg)
+{
+ struct pt_regs *pt;
+ struct regset_getset *dst = arg;
+ elf_greg_t tmp[16];
+ unsigned int i, index, min_copy;
+
+ if (unw_unwind_to_user(info) < 0)
+ return;
+
+ /*
+ * coredump format:
+ * r0-r31
+ * NaT bits (for r0-r31; bit N == 1 iff rN is a NaT)
+ * predicate registers (p0-p63)
+ * b0-b7
+ * ip cfm user-mask
+ * ar.rsc ar.bsp ar.bspstore ar.rnat
+ * ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec
+ */
+
+
+ /* Skip r0 */
+ if (dst->count > 0 && dst->pos < ELF_GR_OFFSET(1)) {
+ dst->ret = user_regset_copyout_zero(&dst->pos, &dst->count,
+ &dst->u.get.kbuf,
+ &dst->u.get.ubuf,
+ 0, ELF_GR_OFFSET(1));
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+
+ /* gr1 - gr15 */
+ if (dst->count > 0 && dst->pos < ELF_GR_OFFSET(16)) {
+ index = (dst->pos - ELF_GR_OFFSET(1)) / sizeof(elf_greg_t);
+ min_copy = ELF_GR_OFFSET(16) > (dst->pos + dst->count) ?
+ (dst->pos + dst->count) : ELF_GR_OFFSET(16);
+ for (i = dst->pos; i < min_copy; i += sizeof(elf_greg_t),
+ index++)
+ if (access_elf_reg(dst->target, info, i,
+ &tmp[index], 0) < 0) {
+ dst->ret = -EIO;
+ return;
+ }
+ dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf, tmp,
+ ELF_GR_OFFSET(1), ELF_GR_OFFSET(16));
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+
+ /* r16-r31 */
+ if (dst->count > 0 && dst->pos < ELF_NAT_OFFSET) {
+ pt = task_pt_regs(dst->target);
+ dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf, &pt->r16,
+ ELF_GR_OFFSET(16), ELF_NAT_OFFSET);
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+
+ /* nat, pr, b0 - b7 */
+ if (dst->count > 0 && dst->pos < ELF_CR_IIP_OFFSET) {
+ index = (dst->pos - ELF_NAT_OFFSET) / sizeof(elf_greg_t);
+ min_copy = ELF_CR_IIP_OFFSET > (dst->pos + dst->count) ?
+ (dst->pos + dst->count) : ELF_CR_IIP_OFFSET;
+ for (i = dst->pos; i < min_copy; i += sizeof(elf_greg_t),
+ index++)
+ if (access_elf_reg(dst->target, info, i,
+ &tmp[index], 0) < 0) {
+ dst->ret = -EIO;
+ return;
+ }
+ dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf, tmp,
+ ELF_NAT_OFFSET, ELF_CR_IIP_OFFSET);
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+
+ /* ip cfm psr ar.rsc ar.bsp ar.bspstore ar.rnat
+ * ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd
+ */
+ if (dst->count > 0 && dst->pos < (ELF_AR_END_OFFSET)) {
+ index = (dst->pos - ELF_CR_IIP_OFFSET) / sizeof(elf_greg_t);
+ min_copy = ELF_AR_END_OFFSET > (dst->pos + dst->count) ?
+ (dst->pos + dst->count) : ELF_AR_END_OFFSET;
+ for (i = dst->pos; i < min_copy; i += sizeof(elf_greg_t),
+ index++)
+ if (access_elf_reg(dst->target, info, i,
+ &tmp[index], 0) < 0) {
+ dst->ret = -EIO;
+ return;
+ }
+ dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf, tmp,
+ ELF_CR_IIP_OFFSET, ELF_AR_END_OFFSET);
+ }
+}
+
+void do_gpregs_set(struct unw_frame_info *info, void *arg)
+{
+ struct pt_regs *pt;
+ struct regset_getset *dst = arg;
+ elf_greg_t tmp[16];
+ unsigned int i, index;
+
+ if (unw_unwind_to_user(info) < 0)
+ return;
+
+ /* Skip r0 */
+ if (dst->count > 0 && dst->pos < ELF_GR_OFFSET(1)) {
+ dst->ret = user_regset_copyin_ignore(&dst->pos, &dst->count,
+ &dst->u.set.kbuf,
+ &dst->u.set.ubuf,
+ 0, ELF_GR_OFFSET(1));
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+
+ /* gr1-gr15 */
+ if (dst->count > 0 && dst->pos < ELF_GR_OFFSET(16)) {
+ i = dst->pos;
+ index = (dst->pos - ELF_GR_OFFSET(1)) / sizeof(elf_greg_t);
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf, &dst->u.set.ubuf, tmp,
+ ELF_GR_OFFSET(1), ELF_GR_OFFSET(16));
+ if (dst->ret)
+ return;
+ for ( ; i < dst->pos; i += sizeof(elf_greg_t), index++)
+ if (access_elf_reg(dst->target, info, i,
+ &tmp[index], 1) < 0) {
+ dst->ret = -EIO;
+ return;
+ }
+ if (dst->count == 0)
+ return;
+ }
+
+ /* gr16-gr31 */
+ if (dst->count > 0 && dst->pos < ELF_NAT_OFFSET) {
+ pt = task_pt_regs(dst->target);
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf, &dst->u.set.ubuf, &pt->r16,
+ ELF_GR_OFFSET(16), ELF_NAT_OFFSET);
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+
+ /* nat, pr, b0 - b7 */
+ if (dst->count > 0 && dst->pos < ELF_CR_IIP_OFFSET) {
+ i = dst->pos;
+ index = (dst->pos - ELF_NAT_OFFSET) / sizeof(elf_greg_t);
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf, &dst->u.set.ubuf, tmp,
+ ELF_NAT_OFFSET, ELF_CR_IIP_OFFSET);
+ if (dst->ret)
+ return;
+ for (; i < dst->pos; i += sizeof(elf_greg_t), index++)
+ if (access_elf_reg(dst->target, info, i,
+ &tmp[index], 1) < 0) {
+ dst->ret = -EIO;
+ return;
+ }
+ if (dst->count == 0)
+ return;
+ }
+
+ /* ip cfm psr ar.rsc ar.bsp ar.bspstore ar.rnat
+ * ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd
+ */
+ if (dst->count > 0 && dst->pos < (ELF_AR_END_OFFSET)) {
+ i = dst->pos;
+ index = (dst->pos - ELF_CR_IIP_OFFSET) / sizeof(elf_greg_t);
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf, &dst->u.set.ubuf, tmp,
+ ELF_CR_IIP_OFFSET, ELF_AR_END_OFFSET);
+ if (dst->ret)
+ return;
+ for ( ; i < dst->pos; i += sizeof(elf_greg_t), index++)
+ if (access_elf_reg(dst->target, info, i,
+ &tmp[index], 1) < 0) {
+ dst->ret = -EIO;
+ return;
+ }
+ }
+}
+
+#define ELF_FP_OFFSET(i) (i * sizeof(elf_fpreg_t))
+
+void do_fpregs_get(struct unw_frame_info *info, void *arg)
+{
+ struct regset_getset *dst = arg;
+ struct task_struct *task = dst->target;
+ elf_fpreg_t tmp[30];
+ int index, min_copy, i;
+
+ if (unw_unwind_to_user(info) < 0)
+ return;
+
+ /* Skip pos 0 and 1 */
+ if (dst->count > 0 && dst->pos < ELF_FP_OFFSET(2)) {
+ dst->ret = user_regset_copyout_zero(&dst->pos, &dst->count,
+ &dst->u.get.kbuf,
+ &dst->u.get.ubuf,
+ 0, ELF_FP_OFFSET(2));
+ if (dst->count == 0 || dst->ret)
+ return;
+ }
+
+ /* fr2-fr31 */
+ if (dst->count > 0 && dst->pos < ELF_FP_OFFSET(32)) {
+ index = (dst->pos - ELF_FP_OFFSET(2)) / sizeof(elf_fpreg_t);
+
+ min_copy = min(((unsigned int)ELF_FP_OFFSET(32)),
+ dst->pos + dst->count);
+ for (i = dst->pos; i < min_copy; i += sizeof(elf_fpreg_t),
+ index++)
+ if (unw_get_fr(info, i / sizeof(elf_fpreg_t),
+ &tmp[index])) {
+ dst->ret = -EIO;
+ return;
+ }
+ dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf, tmp,
+ ELF_FP_OFFSET(2), ELF_FP_OFFSET(32));
+ if (dst->count == 0 || dst->ret)
+ return;
+ }
+
+ /* fph */
+ if (dst->count > 0) {
+ ia64_flush_fph(dst->target);
+ if (task->thread.flags & IA64_THREAD_FPH_VALID)
+ dst->ret = user_regset_copyout(
+ &dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf,
+ &dst->target->thread.fph,
+ ELF_FP_OFFSET(32), -1);
+ else
+ /* Zero fill instead. */
+ dst->ret = user_regset_copyout_zero(
+ &dst->pos, &dst->count,
+ &dst->u.get.kbuf, &dst->u.get.ubuf,
+ ELF_FP_OFFSET(32), -1);
+ }
+}
+
+void do_fpregs_set(struct unw_frame_info *info, void *arg)
+{
+ struct regset_getset *dst = arg;
+ elf_fpreg_t fpreg, tmp[30];
+ int index, start, end;
+
+ if (unw_unwind_to_user(info) < 0)
+ return;
+
+ /* Skip pos 0 and 1 */
+ if (dst->count > 0 && dst->pos < ELF_FP_OFFSET(2)) {
+ dst->ret = user_regset_copyin_ignore(&dst->pos, &dst->count,
+ &dst->u.set.kbuf,
+ &dst->u.set.ubuf,
+ 0, ELF_FP_OFFSET(2));
+ if (dst->count == 0 || dst->ret)
+ return;
+ }
+
+ /* fr2-fr31 */
+ if (dst->count > 0 && dst->pos < ELF_FP_OFFSET(32)) {
+ start = dst->pos;
+ end = min(((unsigned int)ELF_FP_OFFSET(32)),
+ dst->pos + dst->count);
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf, &dst->u.set.ubuf, tmp,
+ ELF_FP_OFFSET(2), ELF_FP_OFFSET(32));
+ if (dst->ret)
+ return;
+
+ if (start & 0xF) { /* only write high part */
+ if (unw_get_fr(info, start / sizeof(elf_fpreg_t),
+ &fpreg)) {
+ dst->ret = -EIO;
+ return;
+ }
+ tmp[start / sizeof(elf_fpreg_t) - 2].u.bits[0]
+ = fpreg.u.bits[0];
+ start &= ~0xFUL;
+ }
+ if (end & 0xF) { /* only write low part */
+ if (unw_get_fr(info, end / sizeof(elf_fpreg_t),
+ &fpreg)) {
+ dst->ret = -EIO;
+ return;
+ }
+ tmp[end / sizeof(elf_fpreg_t) - 2].u.bits[1]
+ = fpreg.u.bits[1];
+ end = (end + 0xF) & ~0xFUL;
+ }
+
+ for ( ; start < end ; start += sizeof(elf_fpreg_t)) {
+ index = start / sizeof(elf_fpreg_t);
+ if (unw_set_fr(info, index, tmp[index - 2])) {
+ dst->ret = -EIO;
+ return;
+ }
+ }
+ if (dst->ret || dst->count == 0)
+ return;
+ }
+
+ /* fph */
+ if (dst->count > 0 && dst->pos < ELF_FP_OFFSET(128)) {
+ ia64_sync_fph(dst->target);
+ dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+ &dst->u.set.kbuf,
+ &dst->u.set.ubuf,
+ &dst->target->thread.fph,
+ ELF_FP_OFFSET(32), -1);
+ }
+}
+
+static int
+do_regset_call(void (*call)(struct unw_frame_info *, void *),
+ struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ struct regset_getset info = { .target = target, .regset = regset,
+ .pos = pos, .count = count,
+ .u.set = { .kbuf = kbuf, .ubuf = ubuf },
+ .ret = 0 };
+
+ if (target == current)
+ unw_init_running(call, &info);
+ else {
+ struct unw_frame_info ufi;
+ memset(&ufi, 0, sizeof(ufi));
+ unw_init_from_blocked_task(&ufi, target);
+ (*call)(&ufi, &info);
+ }
+
+ return info.ret;
+}
+
+static int
+gpregs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ return do_regset_call(do_gpregs_get, target, regset, pos, count,
+ kbuf, ubuf);
+}
+
+static int gpregs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return do_regset_call(do_gpregs_set, target, regset, pos, count,
+ kbuf, ubuf);
+}
+
+static void do_gpregs_writeback(struct unw_frame_info *info, void *arg)
+{
+ do_sync_rbs(info, ia64_sync_user_rbs);
+}
+
+/*
+ * This is called to write back the register backing store.
+ * ptrace does this before it stops, so that a tracer reading the user
+ * memory after the thread stops will get the current register data.
+ */
+static int
+gpregs_writeback(struct task_struct *target,
+ const struct user_regset *regset,
+ int now)
+{
+ if (test_and_set_tsk_thread_flag(target, TIF_RESTORE_RSE))
+ return 0;
+ tsk_set_notify_resume(target);
+ return do_regset_call(do_gpregs_writeback, target, regset, 0, 0,
+ NULL, NULL);
+}
+
+static int
+fpregs_active(struct task_struct *target, const struct user_regset *regset)
+{
+ return (target->thread.flags & IA64_THREAD_FPH_VALID) ? 128 : 32;
+}
+
+static int fpregs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ return do_regset_call(do_fpregs_get, target, regset, pos, count,
+ kbuf, ubuf);
+}
+
+static int fpregs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ return do_regset_call(do_fpregs_set, target, regset, pos, count,
+ kbuf, ubuf);
+}
+
+static int
+access_uarea(struct task_struct *child, unsigned long addr,
+ unsigned long *data, int write_access)
+{
+ unsigned int pos = -1; /* an invalid value */
+ int ret;
+ unsigned long *ptr, regnum;
+
+ if ((addr & 0x7) != 0) {
+ dprintk("ptrace: unaligned register address 0x%lx\n", addr);
+ return -1;
+ }
+ if ((addr >= PT_NAT_BITS + 8 && addr < PT_F2) ||
+ (addr >= PT_R7 + 8 && addr < PT_B1) ||
+ (addr >= PT_AR_LC + 8 && addr < PT_CR_IPSR) ||
+ (addr >= PT_AR_SSD + 8 && addr < PT_DBR)) {
+ dprintk("ptrace: rejecting access to register "
+ "address 0x%lx\n", addr);
+ return -1;
+ }
+
+ switch (addr) {
+ case PT_F32 ... (PT_F127 + 15):
+ pos = addr - PT_F32 + ELF_FP_OFFSET(32);
+ break;
+ case PT_F2 ... (PT_F5 + 15):
+ pos = addr - PT_F2 + ELF_FP_OFFSET(2);
+ break;
+ case PT_F10 ... (PT_F31 + 15):
+ pos = addr - PT_F10 + ELF_FP_OFFSET(10);
+ break;
+ case PT_F6 ... (PT_F9 + 15):
+ pos = addr - PT_F6 + ELF_FP_OFFSET(6);
+ break;
+ }
+
+ if (pos != -1) {
+ if (write_access)
+ ret = fpregs_set(child, NULL, pos,
+ sizeof(unsigned long), data, NULL);
+ else
+ ret = fpregs_get(child, NULL, pos,
+ sizeof(unsigned long), data, NULL);
+ if (ret != 0)
+ return -1;
+ return 0;
+ }
+
+ switch (addr) {
+ case PT_NAT_BITS:
+ pos = ELF_NAT_OFFSET;
+ break;
+ case PT_R4 ... PT_R7:
+ pos = addr - PT_R4 + ELF_GR_OFFSET(4);
+ break;
+ case PT_B1 ... PT_B5:
+ pos = addr - PT_B1 + ELF_BR_OFFSET(1);
+ break;
+ case PT_AR_EC:
+ pos = ELF_AR_EC_OFFSET;
+ break;
+ case PT_AR_LC:
+ pos = ELF_AR_LC_OFFSET;
+ break;
+ case PT_CR_IPSR:
+ pos = ELF_CR_IPSR_OFFSET;
+ break;
+ case PT_CR_IIP:
+ pos = ELF_CR_IIP_OFFSET;
+ break;
+ case PT_CFM:
+ pos = ELF_CFM_OFFSET;
+ break;
+ case PT_AR_UNAT:
+ pos = ELF_AR_UNAT_OFFSET;
+ break;
+ case PT_AR_PFS:
+ pos = ELF_AR_PFS_OFFSET;
+ break;
+ case PT_AR_RSC:
+ pos = ELF_AR_RSC_OFFSET;
+ break;
+ case PT_AR_RNAT:
+ pos = ELF_AR_RNAT_OFFSET;
+ break;
+ case PT_AR_BSPSTORE:
+ pos = ELF_AR_BSPSTORE_OFFSET;
+ break;
+ case PT_PR:
+ pos = ELF_PR_OFFSET;
+ break;
+ case PT_B6:
+ pos = ELF_BR_OFFSET(6);
+ break;
+ case PT_AR_BSP:
+ pos = ELF_AR_BSP_OFFSET;
+ break;
+ case PT_R1 ... PT_R3:
+ pos = addr - PT_R1 + ELF_GR_OFFSET(1);
+ break;
+ case PT_R12 ... PT_R15:
+ pos = addr - PT_R12 + ELF_GR_OFFSET(12);
+ break;
+ case PT_R8 ... PT_R11:
+ pos = addr - PT_R8 + ELF_GR_OFFSET(8);
+ break;
+ case PT_R16 ... PT_R31:
+ pos = addr - PT_R16 + ELF_GR_OFFSET(16);
+ break;
+ case PT_AR_CCV:
+ pos = ELF_AR_CCV_OFFSET;
+ break;
+ case PT_AR_FPSR:
+ pos = ELF_AR_FPSR_OFFSET;
+ break;
+ case PT_B0:
+ pos = ELF_BR_OFFSET(0);
+ break;
+ case PT_B7:
+ pos = ELF_BR_OFFSET(7);
+ break;
+ case PT_AR_CSD:
+ pos = ELF_AR_CSD_OFFSET;
+ break;
+ case PT_AR_SSD:
+ pos = ELF_AR_SSD_OFFSET;
+ break;
+ }
+
+ if (pos != -1) {
+ if (write_access)
+ ret = gpregs_set(child, NULL, pos,
+ sizeof(unsigned long), data, NULL);
+ else
+ ret = gpregs_get(child, NULL, pos,
+ sizeof(unsigned long), data, NULL);
+ if (ret != 0)
+ return -1;
+ return 0;
+ }
+
+ /* access debug registers */
+ if (addr >= PT_IBR) {
+ regnum = (addr - PT_IBR) >> 3;
+ ptr = &child->thread.ibr[0];
+ } else {
+ regnum = (addr - PT_DBR) >> 3;
+ ptr = &child->thread.dbr[0];
+ }
+
+ if (regnum >= 8) {
+ dprintk("ptrace: rejecting access to register "
+ "address 0x%lx\n", addr);
+ return -1;
+ }
+#ifdef CONFIG_PERFMON
+ /*
+ * Check if debug registers are used by perfmon. This
+ * test must be done once we know that we can do the
+ * operation, i.e. the arguments are all valid, but
+ * before we start modifying the state.
+ *
+ * Perfmon needs to keep a count of how many processes
+ * are trying to modify the debug registers for system
+ * wide monitoring sessions.
+ *
+ * We also include read access here, because they may
+ * cause the PMU-installed debug register state
+ * (dbr[], ibr[]) to be reset. The two arrays are also
+ * used by perfmon, but we do not use
+ * IA64_THREAD_DBG_VALID. The registers are restored
+ * by the PMU context switch code.
+ */
+ if (pfm_use_debug_registers(child))
+ return -1;
+#endif
+
+ if (!(child->thread.flags & IA64_THREAD_DBG_VALID)) {
+ child->thread.flags |= IA64_THREAD_DBG_VALID;
+ memset(child->thread.dbr, 0,
+ sizeof(child->thread.dbr));
+ memset(child->thread.ibr, 0,
+ sizeof(child->thread.ibr));
+ }
+
+ ptr += regnum;
+
+ if ((regnum & 1) && write_access) {
+ /* don't let the user set kernel-level breakpoints: */
+ *ptr = *data & ~(7UL << 56);
+ return 0;
+ }
+ if (write_access)
+ *ptr = *data;
+ else
+ *data = *ptr;
+ return 0;
+}
+
+static const struct user_regset native_regsets[] = {
+ {
+ .core_note_type = NT_PRSTATUS,
+ .n = ELF_NGREG,
+ .size = sizeof(elf_greg_t), .align = sizeof(elf_greg_t),
+ .get = gpregs_get, .set = gpregs_set,
+ .writeback = gpregs_writeback
+ },
+ {
+ .core_note_type = NT_PRFPREG,
+ .n = ELF_NFPREG,
+ .size = sizeof(elf_fpreg_t), .align = sizeof(elf_fpreg_t),
+ .get = fpregs_get, .set = fpregs_set, .active = fpregs_active
+ },
+};
+
+static const struct user_regset_view user_ia64_view = {
+ .name = "ia64",
+ .e_machine = EM_IA_64,
+ .regsets = native_regsets, .n = ARRAY_SIZE(native_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *tsk)
+{
+#ifdef CONFIG_IA32_SUPPORT
+ extern const struct user_regset_view user_ia32_view;
+ if (IS_IA32_PROCESS(task_pt_regs(tsk)))
+ return &user_ia32_view;
+#endif
+ return &user_ia64_view;
+}
diff --git a/arch/ia64/kernel/semaphore.c b/arch/ia64/kernel/semaphore.c
deleted file mode 100644
index 2724ef3..0000000
--- a/arch/ia64/kernel/semaphore.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * IA-64 semaphore implementation (derived from x86 version).
- *
- * Copyright (C) 1999-2000, 2002 Hewlett-Packard Co
- * David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-/*
- * Semaphores are implemented using a two-way counter: The "count"
- * variable is decremented for each process that tries to acquire the
- * semaphore, while the "sleepers" variable is a count of such
- * acquires.
- *
- * Notably, the inline "up()" and "down()" functions can efficiently
- * test if they need to do any extra work (up needs to do something
- * only if count was negative before the increment operation.
- *
- * "sleeping" and the contention routine ordering is protected
- * by the spinlock in the semaphore's waitqueue head.
- *
- * Note that these functions are only called when there is contention
- * on the lock, and as such all this is the "non-critical" part of the
- * whole semaphore business. The critical part is the inline stuff in
- * <asm/semaphore.h> where we want to avoid any extra jumps and calls.
- */
-#include <linux/sched.h>
-#include <linux/init.h>
-
-#include <asm/errno.h>
-#include <asm/semaphore.h>
-
-/*
- * Logic:
- * - Only on a boundary condition do we need to care. When we go
- * from a negative count to a non-negative, we wake people up.
- * - When we go from a non-negative count to a negative do we
- * (a) synchronize with the "sleepers" count and (b) make sure
- * that we're on the wakeup list before we synchronize so that
- * we cannot lose wakeup events.
- */
-
-void
-__up (struct semaphore *sem)
-{
- wake_up(&sem->wait);
-}
-
-void __sched __down (struct semaphore *sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- unsigned long flags;
-
- tsk->state = TASK_UNINTERRUPTIBLE;
- spin_lock_irqsave(&sem->wait.lock, flags);
- add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock in
- * the wait_queue_head.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- schedule();
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- tsk->state = TASK_UNINTERRUPTIBLE;
- }
- remove_wait_queue_locked(&sem->wait, &wait);
- wake_up_locked(&sem->wait);
- spin_unlock_irqrestore(&sem->wait.lock, flags);
- tsk->state = TASK_RUNNING;
-}
-
-int __sched __down_interruptible (struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- unsigned long flags;
-
- tsk->state = TASK_INTERRUPTIBLE;
- spin_lock_irqsave(&sem->wait.lock, flags);
- add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
- sem->sleepers ++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * With signals pending, this turns into
- * the trylock failure case - we won't be
- * sleeping, and we* can't get the lock as
- * it has contention. Just correct the count
- * and exit.
- */
- if (signal_pending(current)) {
- retval = -EINTR;
- sem->sleepers = 0;
- atomic_add(sleepers, &sem->count);
- break;
- }
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock in
- * wait_queue_head. The "-1" is because we're
- * still hoping to get the semaphore.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- schedule();
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- tsk->state = TASK_INTERRUPTIBLE;
- }
- remove_wait_queue_locked(&sem->wait, &wait);
- wake_up_locked(&sem->wait);
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- tsk->state = TASK_RUNNING;
- return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for having decremented the
- * count.
- */
-int
-__down_trylock (struct semaphore *sem)
-{
- unsigned long flags;
- int sleepers;
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- sleepers = sem->sleepers + 1;
- sem->sleepers = 0;
-
- /*
- * Add "everybody else" and us into it. They aren't
- * playing, because we own the spinlock in the
- * wait_queue_head.
- */
- if (!atomic_add_negative(sleepers, &sem->count)) {
- wake_up_locked(&sem->wait);
- }
-
- spin_unlock_irqrestore(&sem->wait.lock, flags);
- return 1;
-}
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 4aa9eae..5015ca1 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -59,6 +59,7 @@
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/system.h>
+#include <asm/tlbflush.h>
#include <asm/unistd.h>
#include <asm/hpsim.h>
@@ -176,6 +177,29 @@
return 0;
}
+/*
+ * Similar to "filter_rsvd_memory()", but the reserved memory ranges
+ * are not filtered out.
+ */
+int __init
+filter_memory(unsigned long start, unsigned long end, void *arg)
+{
+ void (*func)(unsigned long, unsigned long, int);
+
+#if IGNORE_PFN0
+ if (start == PAGE_OFFSET) {
+ printk(KERN_WARNING "warning: skipping physical page 0\n");
+ start += PAGE_SIZE;
+ if (start >= end)
+ return 0;
+ }
+#endif
+ func = arg;
+ if (start < end)
+ call_pernode_memory(__pa(start), end - start, func);
+ return 0;
+}
+
static void __init
sort_regions (struct rsvd_region *rsvd_region, int max)
{
@@ -493,6 +517,8 @@
acpi_table_init();
# ifdef CONFIG_ACPI_NUMA
acpi_numa_init();
+ per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ?
+ 32 : cpus_weight(early_cpu_possible_map)), additional_cpus);
# endif
#else
# ifdef CONFIG_SMP
@@ -946,9 +972,10 @@
#endif
/* set ia64_ctx.max_rid to the maximum RID that is supported by all CPUs: */
- if (ia64_pal_vm_summary(NULL, &vmi) == 0)
+ if (ia64_pal_vm_summary(NULL, &vmi) == 0) {
max_ctx = (1U << (vmi.pal_vm_info_2_s.rid_size - 3)) - 1;
- else {
+ setup_ptcg_sem(vmi.pal_vm_info_2_s.max_purges, NPTCG_FROM_PAL);
+ } else {
printk(KERN_WARNING "cpu_init: PAL VM summary failed, assuming 18 RID bits\n");
max_ctx = (1U << 15) - 1; /* use architected minimum */
}
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 4e446aa..9a9d4c4 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -213,6 +213,19 @@
* Called with preemption disabled.
*/
static inline void
+send_IPI_mask(cpumask_t mask, int op)
+{
+ unsigned int cpu;
+
+ for_each_cpu_mask(cpu, mask) {
+ send_IPI_single(cpu, op);
+ }
+}
+
+/*
+ * Called with preemption disabled.
+ */
+static inline void
send_IPI_all (int op)
{
int i;
@@ -401,6 +414,75 @@
}
EXPORT_SYMBOL(smp_call_function_single);
+/**
+ * smp_call_function_mask(): Run a function on a set of other CPUs.
+ * <mask> The set of cpus to run on. Must not include the current cpu.
+ * <func> The function to run. This must be fast and non-blocking.
+ * <info> An arbitrary pointer to pass to the function.
+ * <wait> If true, wait (atomically) until function
+ * has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+int smp_call_function_mask(cpumask_t mask,
+ void (*func)(void *), void *info,
+ int wait)
+{
+ struct call_data_struct data;
+ cpumask_t allbutself;
+ int cpus;
+
+ spin_lock(&call_lock);
+ allbutself = cpu_online_map;
+ cpu_clear(smp_processor_id(), allbutself);
+
+ cpus_and(mask, mask, allbutself);
+ cpus = cpus_weight(mask);
+ if (!cpus) {
+ spin_unlock(&call_lock);
+ return 0;
+ }
+
+ /* Can deadlock when called with interrupts disabled */
+ WARN_ON(irqs_disabled());
+
+ data.func = func;
+ data.info = info;
+ atomic_set(&data.started, 0);
+ data.wait = wait;
+ if (wait)
+ atomic_set(&data.finished, 0);
+
+ call_data = &data;
+ mb(); /* ensure store to call_data precedes setting of IPI_CALL_FUNC*/
+
+ /* Send a message to other CPUs */
+ if (cpus_equal(mask, allbutself))
+ send_IPI_allbutself(IPI_CALL_FUNC);
+ else
+ send_IPI_mask(mask, IPI_CALL_FUNC);
+
+ /* Wait for response */
+ while (atomic_read(&data.started) != cpus)
+ cpu_relax();
+
+ if (wait)
+ while (atomic_read(&data.finished) != cpus)
+ cpu_relax();
+ call_data = NULL;
+
+ spin_unlock(&call_lock);
+ return 0;
+
+}
+EXPORT_SYMBOL(smp_call_function_mask);
+
/*
* this function sends a 'generic call function' IPI to all other CPUs
* in the system.
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 32ee597..16483be 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -400,9 +400,9 @@
/* Setup the per cpu irq handling data structures */
__setup_vector_irq(cpuid);
cpu_set(cpuid, cpu_online_map);
- unlock_ipi_calllock();
per_cpu(cpu_state, cpuid) = CPU_ONLINE;
spin_unlock(&vector_lock);
+ unlock_ipi_calllock();
smp_setup_percpu_timer();
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 17fda52..48e15a5 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -59,6 +59,84 @@
};
static struct clocksource *itc_clocksource;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+
+#include <linux/kernel_stat.h>
+
+extern cputime_t cycle_to_cputime(u64 cyc);
+
+/*
+ * Called from the context switch with interrupts disabled, to charge all
+ * accumulated times to the current process, and to prepare accounting on
+ * the next process.
+ */
+void ia64_account_on_switch(struct task_struct *prev, struct task_struct *next)
+{
+ struct thread_info *pi = task_thread_info(prev);
+ struct thread_info *ni = task_thread_info(next);
+ cputime_t delta_stime, delta_utime;
+ __u64 now;
+
+ now = ia64_get_itc();
+
+ delta_stime = cycle_to_cputime(pi->ac_stime + (now - pi->ac_stamp));
+ account_system_time(prev, 0, delta_stime);
+ account_system_time_scaled(prev, delta_stime);
+
+ if (pi->ac_utime) {
+ delta_utime = cycle_to_cputime(pi->ac_utime);
+ account_user_time(prev, delta_utime);
+ account_user_time_scaled(prev, delta_utime);
+ }
+
+ pi->ac_stamp = ni->ac_stamp = now;
+ ni->ac_stime = ni->ac_utime = 0;
+}
+
+/*
+ * Account time for a transition between system, hard irq or soft irq state.
+ * Note that this function is called with interrupts enabled.
+ */
+void account_system_vtime(struct task_struct *tsk)
+{
+ struct thread_info *ti = task_thread_info(tsk);
+ unsigned long flags;
+ cputime_t delta_stime;
+ __u64 now;
+
+ local_irq_save(flags);
+
+ now = ia64_get_itc();
+
+ delta_stime = cycle_to_cputime(ti->ac_stime + (now - ti->ac_stamp));
+ account_system_time(tsk, 0, delta_stime);
+ account_system_time_scaled(tsk, delta_stime);
+ ti->ac_stime = 0;
+
+ ti->ac_stamp = now;
+
+ local_irq_restore(flags);
+}
+
+/*
+ * Called from the timer interrupt handler to charge accumulated user time
+ * to the current process. Must be called with interrupts disabled.
+ */
+void account_process_tick(struct task_struct *p, int user_tick)
+{
+ struct thread_info *ti = task_thread_info(p);
+ cputime_t delta_utime;
+
+ if (ti->ac_utime) {
+ delta_utime = cycle_to_cputime(ti->ac_utime);
+ account_user_time(p, delta_utime);
+ account_user_time_scaled(p, delta_utime);
+ ti->ac_utime = 0;
+ }
+}
+
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+
static irqreturn_t
timer_interrupt (int irq, void *dev_id)
{
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index 6903361..ff0e7c1 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -13,6 +13,7 @@
* 2001/08/13 Correct size of extended floats (float_fsz) from 16 to 10 bytes.
* 2001/01/17 Add support emulation of unaligned kernel accesses.
*/
+#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/tty.h>
@@ -1290,7 +1291,7 @@
{
static unsigned long count, last_time;
- if (jiffies - last_time > 5*HZ)
+ if (time_after(jiffies, last_time + 5 * HZ))
count = 0;
if (count < 5) {
last_time = jiffies;
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 344f64e..798bf98 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -45,8 +45,6 @@
printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk(KERN_INFO "Free swap: %6ldkB\n",
- nr_swap_pages<<(PAGE_SHIFT-10));
printk(KERN_INFO "Node memory in pages:\n");
for_each_online_pgdat(pgdat) {
unsigned long present;
@@ -255,7 +253,7 @@
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
#ifdef CONFIG_VIRTUAL_MEM_MAP
- efi_memmap_walk(register_active_ranges, NULL);
+ efi_memmap_walk(filter_memory, register_active_ranges);
efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
if (max_gap < LARGE_GAP) {
vmem_map = (struct page *) 0;
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index ee5e68b..544dc42 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -104,7 +104,7 @@
{
int cpu, n = 0;
- for (cpu = 0; cpu < NR_CPUS; cpu++)
+ for_each_possible_early_cpu(cpu)
if (node == node_cpuid[cpu].nid)
n++;
@@ -124,6 +124,7 @@
pernodesize += node * L1_CACHE_BYTES;
pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
pernodesize += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
+ pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
pernodesize = PAGE_ALIGN(pernodesize);
return pernodesize;
}
@@ -142,7 +143,7 @@
#ifdef CONFIG_SMP
int cpu;
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ for_each_possible_early_cpu(cpu) {
if (node == node_cpuid[cpu].nid) {
memcpy(__va(cpu_data), __phys_per_cpu_start,
__per_cpu_end - __per_cpu_start);
@@ -345,7 +346,7 @@
#ifdef CONFIG_SMP
/* Set the node_data pointer for each per-cpu struct */
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
+ for_each_possible_early_cpu(cpu) {
node = node_cpuid[cpu].nid;
per_cpu(cpu_info, cpu).node_data = mem_data[node].node_data;
}
@@ -444,7 +445,7 @@
mem_data[node].min_pfn = ~0UL;
}
- efi_memmap_walk(register_active_ranges, NULL);
+ efi_memmap_walk(filter_memory, register_active_ranges);
/*
* Initialize the boot memory maps in reverse order since that's
@@ -493,13 +494,9 @@
int cpu;
static int first_time = 1;
-
- if (smp_processor_id() != 0)
- return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
-
if (first_time) {
first_time = 0;
- for (cpu = 0; cpu < NR_CPUS; cpu++)
+ for_each_possible_early_cpu(cpu)
per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
}
@@ -522,8 +519,6 @@
printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk(KERN_INFO "Free swap: %6ldkB\n",
- nr_swap_pages<<(PAGE_SHIFT-10));
printk(KERN_INFO "Node memory in pages:\n");
for_each_online_pgdat(pgdat) {
unsigned long present;
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index a4ca657..5c1de53 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -58,7 +58,6 @@
{
unsigned long addr;
struct page *page;
- unsigned long order;
page = pte_page(pte);
addr = (unsigned long) page_address(page);
@@ -66,12 +65,7 @@
if (test_bit(PG_arch_1, &page->flags))
return; /* i-cache is already coherent with d-cache */
- if (PageCompound(page)) {
- order = compound_order(page);
- flush_icache_range(addr, addr + (1UL << order << PAGE_SHIFT));
- }
- else
- flush_icache_range(addr, addr + PAGE_SIZE);
+ flush_icache_range(addr, addr + (PAGE_SIZE << compound_order(page)));
set_bit(PG_arch_1, &page->flags); /* mark page as clean */
}
@@ -553,12 +547,10 @@
#endif /* CONFIG_VIRTUAL_MEM_MAP */
int __init
-register_active_ranges(u64 start, u64 end, void *arg)
+register_active_ranges(u64 start, u64 len, int nid)
{
- int nid = paddr_to_nid(__pa(start));
+ u64 end = start + len;
- if (nid < 0)
- nid = 0;
#ifdef CONFIG_KEXEC
if (start > crashk_res.start && start < crashk_res.end)
start = crashk_res.end;
diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index 7807fc5..b73bf18 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -27,7 +27,9 @@
*/
int num_node_memblks;
struct node_memblk_s node_memblk[NR_NODE_MEMBLKS];
-struct node_cpuid_s node_cpuid[NR_CPUS];
+struct node_cpuid_s node_cpuid[NR_CPUS] =
+ { [0 ... NR_CPUS-1] = { .phys_id = 0, .nid = NUMA_NO_NODE } };
+
/*
* This is a matrix with "distances" between nodes, they should be
* proportional to the memory access latency ratios.
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 655da24..d52ec4e 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -11,6 +11,9 @@
* Rohit Seth <rohit.seth@intel.com>
* Ken Chen <kenneth.w.chen@intel.com>
* Christophe de Dinechin <ddd@hp.com>: Avoid ptc.e on memory allocation
+ * Copyright (C) 2007 Intel Corp
+ * Fenghua Yu <fenghua.yu@intel.com>
+ * Add multiple ptc.g/ptc.ga instruction support in global tlb purge.
*/
#include <linux/module.h>
#include <linux/init.h>
@@ -26,6 +29,9 @@
#include <asm/pal.h>
#include <asm/tlbflush.h>
#include <asm/dma.h>
+#include <asm/processor.h>
+#include <asm/sal.h>
+#include <asm/tlb.h>
static struct {
unsigned long mask; /* mask of supported purge page-sizes */
@@ -39,6 +45,10 @@
};
DEFINE_PER_CPU(u8, ia64_need_tlb_flush);
+DEFINE_PER_CPU(u8, ia64_tr_num); /*Number of TR slots in current processor*/
+DEFINE_PER_CPU(u8, ia64_tr_used); /*Max Slot number used by kernel*/
+
+struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX];
/*
* Initializes the ia64_ctx.bitmap array based on max_ctx+1.
@@ -84,14 +94,140 @@
local_flush_tlb_all();
}
+/*
+ * Implement "spinaphores" ... like counting semaphores, but they
+ * spin instead of sleeping. If there are ever any other users for
+ * this primitive it can be moved up to a spinaphore.h header.
+ */
+struct spinaphore {
+ atomic_t cur;
+};
+
+static inline void spinaphore_init(struct spinaphore *ss, int val)
+{
+ atomic_set(&ss->cur, val);
+}
+
+static inline void down_spin(struct spinaphore *ss)
+{
+ while (unlikely(!atomic_add_unless(&ss->cur, -1, 0)))
+ while (atomic_read(&ss->cur) == 0)
+ cpu_relax();
+}
+
+static inline void up_spin(struct spinaphore *ss)
+{
+ atomic_add(1, &ss->cur);
+}
+
+static struct spinaphore ptcg_sem;
+static u16 nptcg = 1;
+static int need_ptcg_sem = 1;
+static int toolatetochangeptcgsem = 0;
+
+/*
+ * Kernel parameter "nptcg=" overrides max number of concurrent global TLB
+ * purges which is reported from either PAL or SAL PALO.
+ *
+ * We don't have sanity checking for nptcg value. It's the user's responsibility
+ * for valid nptcg value on the platform. Otherwise, kernel may hang in some
+ * cases.
+ */
+static int __init
+set_nptcg(char *str)
+{
+ int value = 0;
+
+ get_option(&str, &value);
+ setup_ptcg_sem(value, NPTCG_FROM_KERNEL_PARAMETER);
+
+ return 1;
+}
+
+__setup("nptcg=", set_nptcg);
+
+/*
+ * Maximum number of simultaneous ptc.g purges in the system can
+ * be defined by PAL_VM_SUMMARY (in which case we should take
+ * the smallest value for any cpu in the system) or by the PAL
+ * override table (in which case we should ignore the value from
+ * PAL_VM_SUMMARY).
+ *
+ * Kernel parameter "nptcg=" overrides maximum number of simultanesous ptc.g
+ * purges defined in either PAL_VM_SUMMARY or PAL override table. In this case,
+ * we should ignore the value from either PAL_VM_SUMMARY or PAL override table.
+ *
+ * Complicating the logic here is the fact that num_possible_cpus()
+ * isn't fully setup until we start bringing cpus online.
+ */
+void
+setup_ptcg_sem(int max_purges, int nptcg_from)
+{
+ static int kp_override;
+ static int palo_override;
+ static int firstcpu = 1;
+
+ if (toolatetochangeptcgsem) {
+ BUG_ON(max_purges < nptcg);
+ return;
+ }
+
+ if (nptcg_from == NPTCG_FROM_KERNEL_PARAMETER) {
+ kp_override = 1;
+ nptcg = max_purges;
+ goto resetsema;
+ }
+ if (kp_override) {
+ need_ptcg_sem = num_possible_cpus() > nptcg;
+ return;
+ }
+
+ if (nptcg_from == NPTCG_FROM_PALO) {
+ palo_override = 1;
+
+ /* In PALO max_purges == 0 really means it! */
+ if (max_purges == 0)
+ panic("Whoa! Platform does not support global TLB purges.\n");
+ nptcg = max_purges;
+ if (nptcg == PALO_MAX_TLB_PURGES) {
+ need_ptcg_sem = 0;
+ return;
+ }
+ goto resetsema;
+ }
+ if (palo_override) {
+ if (nptcg != PALO_MAX_TLB_PURGES)
+ need_ptcg_sem = (num_possible_cpus() > nptcg);
+ return;
+ }
+
+ /* In PAL_VM_SUMMARY max_purges == 0 actually means 1 */
+ if (max_purges == 0) max_purges = 1;
+
+ if (firstcpu) {
+ nptcg = max_purges;
+ firstcpu = 0;
+ }
+ if (max_purges < nptcg)
+ nptcg = max_purges;
+ if (nptcg == PAL_MAX_PURGES) {
+ need_ptcg_sem = 0;
+ return;
+ } else
+ need_ptcg_sem = (num_possible_cpus() > nptcg);
+
+resetsema:
+ spinaphore_init(&ptcg_sem, max_purges);
+}
+
void
ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long nbits)
{
- static DEFINE_SPINLOCK(ptcg_lock);
-
struct mm_struct *active_mm = current->active_mm;
+ toolatetochangeptcgsem = 1;
+
if (mm != active_mm) {
/* Restore region IDs for mm */
if (mm && active_mm) {
@@ -102,19 +238,20 @@
}
}
- /* HW requires global serialization of ptc.ga. */
- spin_lock(&ptcg_lock);
- {
- do {
- /*
- * Flush ALAT entries also.
- */
- ia64_ptcga(start, (nbits<<2));
- ia64_srlz_i();
- start += (1UL << nbits);
- } while (start < end);
- }
- spin_unlock(&ptcg_lock);
+ if (need_ptcg_sem)
+ down_spin(&ptcg_sem);
+
+ do {
+ /*
+ * Flush ALAT entries also.
+ */
+ ia64_ptcga(start, (nbits << 2));
+ ia64_srlz_i();
+ start += (1UL << nbits);
+ } while (start < end);
+
+ if (need_ptcg_sem)
+ up_spin(&ptcg_sem);
if (mm != active_mm) {
activate_context(active_mm);
@@ -190,6 +327,9 @@
ia64_ptce_info_t uninitialized_var(ptce_info); /* GCC be quiet */
unsigned long tr_pgbits;
long status;
+ pal_vm_info_1_u_t vm_info_1;
+ pal_vm_info_2_u_t vm_info_2;
+ int cpu = smp_processor_id();
if ((status = ia64_pal_vm_page_size(&tr_pgbits, &purge.mask)) != 0) {
printk(KERN_ERR "PAL_VM_PAGE_SIZE failed with status=%ld; "
@@ -206,4 +346,191 @@
local_cpu_data->ptce_stride[1] = ptce_info.stride[1];
local_flush_tlb_all(); /* nuke left overs from bootstrapping... */
+ status = ia64_pal_vm_summary(&vm_info_1, &vm_info_2);
+
+ if (status) {
+ printk(KERN_ERR "ia64_pal_vm_summary=%ld\n", status);
+ per_cpu(ia64_tr_num, cpu) = 8;
+ return;
+ }
+ per_cpu(ia64_tr_num, cpu) = vm_info_1.pal_vm_info_1_s.max_itr_entry+1;
+ if (per_cpu(ia64_tr_num, cpu) >
+ (vm_info_1.pal_vm_info_1_s.max_dtr_entry+1))
+ per_cpu(ia64_tr_num, cpu) =
+ vm_info_1.pal_vm_info_1_s.max_dtr_entry+1;
+ if (per_cpu(ia64_tr_num, cpu) > IA64_TR_ALLOC_MAX) {
+ per_cpu(ia64_tr_num, cpu) = IA64_TR_ALLOC_MAX;
+ printk(KERN_DEBUG "TR register number exceeds IA64_TR_ALLOC_MAX!"
+ "IA64_TR_ALLOC_MAX should be extended\n");
+ }
}
+
+/*
+ * is_tr_overlap
+ *
+ * Check overlap with inserted TRs.
+ */
+static int is_tr_overlap(struct ia64_tr_entry *p, u64 va, u64 log_size)
+{
+ u64 tr_log_size;
+ u64 tr_end;
+ u64 va_rr = ia64_get_rr(va);
+ u64 va_rid = RR_TO_RID(va_rr);
+ u64 va_end = va + (1<<log_size) - 1;
+
+ if (va_rid != RR_TO_RID(p->rr))
+ return 0;
+ tr_log_size = (p->itir & 0xff) >> 2;
+ tr_end = p->ifa + (1<<tr_log_size) - 1;
+
+ if (va > tr_end || p->ifa > va_end)
+ return 0;
+ return 1;
+
+}
+
+/*
+ * ia64_insert_tr in virtual mode. Allocate a TR slot
+ *
+ * target_mask : 0x1 : itr, 0x2 : dtr, 0x3 : idtr
+ *
+ * va : virtual address.
+ * pte : pte entries inserted.
+ * log_size: range to be covered.
+ *
+ * Return value: <0 : error No.
+ *
+ * >=0 : slot number allocated for TR.
+ * Must be called with preemption disabled.
+ */
+int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size)
+{
+ int i, r;
+ unsigned long psr;
+ struct ia64_tr_entry *p;
+ int cpu = smp_processor_id();
+
+ r = -EINVAL;
+ /*Check overlap with existing TR entries*/
+ if (target_mask & 0x1) {
+ p = &__per_cpu_idtrs[cpu][0][0];
+ for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu);
+ i++, p++) {
+ if (p->pte & 0x1)
+ if (is_tr_overlap(p, va, log_size)) {
+ printk(KERN_DEBUG "Overlapped Entry"
+ "Inserted for TR Reigster!!\n");
+ goto out;
+ }
+ }
+ }
+ if (target_mask & 0x2) {
+ p = &__per_cpu_idtrs[cpu][1][0];
+ for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu);
+ i++, p++) {
+ if (p->pte & 0x1)
+ if (is_tr_overlap(p, va, log_size)) {
+ printk(KERN_DEBUG "Overlapped Entry"
+ "Inserted for TR Reigster!!\n");
+ goto out;
+ }
+ }
+ }
+
+ for (i = IA64_TR_ALLOC_BASE; i < per_cpu(ia64_tr_num, cpu); i++) {
+ switch (target_mask & 0x3) {
+ case 1:
+ if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1))
+ goto found;
+ continue;
+ case 2:
+ if (!(__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+ goto found;
+ continue;
+ case 3:
+ if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1) &&
+ !(__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+ goto found;
+ continue;
+ default:
+ r = -EINVAL;
+ goto out;
+ }
+ }
+found:
+ if (i >= per_cpu(ia64_tr_num, cpu))
+ return -EBUSY;
+
+ /*Record tr info for mca hander use!*/
+ if (i > per_cpu(ia64_tr_used, cpu))
+ per_cpu(ia64_tr_used, cpu) = i;
+
+ psr = ia64_clear_ic();
+ if (target_mask & 0x1) {
+ ia64_itr(0x1, i, va, pte, log_size);
+ ia64_srlz_i();
+ p = &__per_cpu_idtrs[cpu][0][i];
+ p->ifa = va;
+ p->pte = pte;
+ p->itir = log_size << 2;
+ p->rr = ia64_get_rr(va);
+ }
+ if (target_mask & 0x2) {
+ ia64_itr(0x2, i, va, pte, log_size);
+ ia64_srlz_i();
+ p = &__per_cpu_idtrs[cpu][1][i];
+ p->ifa = va;
+ p->pte = pte;
+ p->itir = log_size << 2;
+ p->rr = ia64_get_rr(va);
+ }
+ ia64_set_psr(psr);
+ r = i;
+out:
+ return r;
+}
+EXPORT_SYMBOL_GPL(ia64_itr_entry);
+
+/*
+ * ia64_purge_tr
+ *
+ * target_mask: 0x1: purge itr, 0x2 : purge dtr, 0x3 purge idtr.
+ * slot: slot number to be freed.
+ *
+ * Must be called with preemption disabled.
+ */
+void ia64_ptr_entry(u64 target_mask, int slot)
+{
+ int cpu = smp_processor_id();
+ int i;
+ struct ia64_tr_entry *p;
+
+ if (slot < IA64_TR_ALLOC_BASE || slot >= per_cpu(ia64_tr_num, cpu))
+ return;
+
+ if (target_mask & 0x1) {
+ p = &__per_cpu_idtrs[cpu][0][slot];
+ if ((p->pte&0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) {
+ p->pte = 0;
+ ia64_ptr(0x1, p->ifa, p->itir>>2);
+ ia64_srlz_i();
+ }
+ }
+
+ if (target_mask & 0x2) {
+ p = &__per_cpu_idtrs[cpu][1][slot];
+ if ((p->pte & 0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) {
+ p->pte = 0;
+ ia64_ptr(0x2, p->ifa, p->itir>>2);
+ ia64_srlz_i();
+ }
+ }
+
+ for (i = per_cpu(ia64_tr_used, cpu); i >= IA64_TR_ALLOC_BASE; i--) {
+ if ((__per_cpu_idtrs[cpu][0][i].pte & 0x1) ||
+ (__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+ break;
+ }
+ per_cpu(ia64_tr_used, cpu) = i;
+}
+EXPORT_SYMBOL_GPL(ia64_ptr_entry);
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index e282c34..53d0a8e 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -362,7 +362,12 @@
info.name = name;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
&info);
-
+ /*
+ * See arch/x86/pci/acpi.c.
+ * The desired pci bus might already be scanned in a quirk. We
+ * should handle the case here, but it appears that IA64 hasn't
+ * such quirk. So we just ignore the case now.
+ */
pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller);
if (pbus)
pcibios_setup_root_windows(pbus, controller);
diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c
index 81785b7..9e0b164 100644
--- a/arch/ia64/sn/kernel/xpc_main.c
+++ b/arch/ia64/sn/kernel/xpc_main.c
@@ -199,7 +199,7 @@
struct xpc_partition *part = (struct xpc_partition *) data;
- DBUG_ON(jiffies < part->disengage_request_timeout);
+ DBUG_ON(time_before(jiffies, part->disengage_request_timeout));
(void) xpc_partition_disengaged(part);
@@ -230,7 +230,7 @@
{
xpc_vars->heartbeat++;
- if (jiffies >= xpc_hb_check_timeout) {
+ if (time_after_eq(jiffies, xpc_hb_check_timeout)) {
wake_up_interruptible(&xpc_act_IRQ_wq);
}
@@ -270,7 +270,7 @@
/* checking of remote heartbeats is skewed by IRQ handling */
- if (jiffies >= xpc_hb_check_timeout) {
+ if (time_after_eq(jiffies, xpc_hb_check_timeout)) {
dev_dbg(xpc_part, "checking remote heartbeats\n");
xpc_check_remote_hb();
@@ -305,7 +305,7 @@
/* wait for IRQ or timeout */
(void) wait_event_interruptible(xpc_act_IRQ_wq,
(last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
- jiffies >= xpc_hb_check_timeout ||
+ time_after_eq(jiffies, xpc_hb_check_timeout) ||
(volatile int) xpc_exiting));
}
diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c
index 7ba4032..9e97c26 100644
--- a/arch/ia64/sn/kernel/xpc_partition.c
+++ b/arch/ia64/sn/kernel/xpc_partition.c
@@ -877,7 +877,7 @@
disengaged = (xpc_partition_engaged(1UL << partid) == 0);
if (part->disengage_request_timeout) {
if (!disengaged) {
- if (jiffies < part->disengage_request_timeout) {
+ if (time_before(jiffies, part->disengage_request_timeout)) {
/* timelimit hasn't been reached yet */
return 0;
}
diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile
index e97e26e..09200d4 100644
--- a/arch/m32r/kernel/Makefile
+++ b/arch/m32r/kernel/Makefile
@@ -5,7 +5,7 @@
extra-y := head.o init_task.o vmlinux.lds
obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \
- m32r_ksyms.o sys_m32r.o semaphore.o signal.o ptrace.o
+ m32r_ksyms.o sys_m32r.o signal.o ptrace.o
obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_MODULES) += module.o
diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index 41a4c95..e6709fe 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -7,7 +7,6 @@
#include <linux/interrupt.h>
#include <linux/string.h>
-#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/checksum.h>
@@ -22,10 +21,6 @@
EXPORT_SYMBOL(__ioremap);
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down_trylock);
/* Networking helper routines. */
/* Delay loops */
diff --git a/arch/m32r/kernel/semaphore.c b/arch/m32r/kernel/semaphore.c
deleted file mode 100644
index 940c2d3..0000000
--- a/arch/m32r/kernel/semaphore.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * linux/arch/m32r/semaphore.c
- * orig : i386 2.6.4
- *
- * M32R semaphore implementation.
- *
- * Copyright (c) 2002 - 2004 Hitoshi Yamamoto
- */
-
-/*
- * i386 semaphore implementation.
- *
- * (C) Copyright 1999 Linus Torvalds
- *
- * Portions Copyright 1999 Red Hat, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org>
- */
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <asm/semaphore.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is protected
- * by the spinlock in the semaphore's waitqueue head.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- * - only on a boundary condition do we need to care. When we go
- * from a negative count to a non-negative, we wake people up.
- * - when we go from a non-negative count to a negative do we
- * (a) synchronize with the "sleeper" count and (b) make sure
- * that we're on the wakeup list before we synchronize so that
- * we cannot lose wakeup events.
- */
-
-asmlinkage void __up(struct semaphore *sem)
-{
- wake_up(&sem->wait);
-}
-
-asmlinkage void __sched __down(struct semaphore * sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- unsigned long flags;
-
- tsk->state = TASK_UNINTERRUPTIBLE;
- spin_lock_irqsave(&sem->wait.lock, flags);
- add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock in
- * the wait_queue_head.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- schedule();
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- tsk->state = TASK_UNINTERRUPTIBLE;
- }
- remove_wait_queue_locked(&sem->wait, &wait);
- wake_up_locked(&sem->wait);
- spin_unlock_irqrestore(&sem->wait.lock, flags);
- tsk->state = TASK_RUNNING;
-}
-
-asmlinkage int __sched __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- unsigned long flags;
-
- tsk->state = TASK_INTERRUPTIBLE;
- spin_lock_irqsave(&sem->wait.lock, flags);
- add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * With signals pending, this turns into
- * the trylock failure case - we won't be
- * sleeping, and we* can't get the lock as
- * it has contention. Just correct the count
- * and exit.
- */
- if (signal_pending(current)) {
- retval = -EINTR;
- sem->sleepers = 0;
- atomic_add(sleepers, &sem->count);
- break;
- }
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock in
- * wait_queue_head. The "-1" is because we're
- * still hoping to get the semaphore.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- schedule();
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- tsk->state = TASK_INTERRUPTIBLE;
- }
- remove_wait_queue_locked(&sem->wait, &wait);
- wake_up_locked(&sem->wait);
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- tsk->state = TASK_RUNNING;
- return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- *
- * We could have done the trylock with a
- * single "cmpxchg" without failure cases,
- * but then it wouldn't work on a 386.
- */
-asmlinkage int __down_trylock(struct semaphore * sem)
-{
- int sleepers;
- unsigned long flags;
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- sleepers = sem->sleepers + 1;
- sem->sleepers = 0;
-
- /*
- * Add "everybody else" and us into it. They aren't
- * playing, because we own the spinlock in the
- * wait_queue_head.
- */
- if (!atomic_add_negative(sleepers, &sem->count)) {
- wake_up_locked(&sem->wait);
- }
-
- spin_unlock_irqrestore(&sem->wait.lock, flags);
- return 1;
-}
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 2cba605..b15173f 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -13,6 +13,8 @@
# Copyright (C) 1994 by Hamish Macdonald
#
+KBUILD_DEFCONFIG := amiga_defconfig
+
# override top level makefile
AS += -m68020
LDFLAGS := -m m68kelf
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 5649fba..e419583 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,63 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:23 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:06 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-amiga"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -80,10 +128,24 @@
CONFIG_M68040=y
CONFIG_M68060=y
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -97,47 +159,288 @@
CONFIG_PROC_HARDWARE=y
CONFIG_ISA=y
CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
# Device Drivers
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_AMIGA=m
CONFIG_PARPORT_MFC3=m
# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
+CONFIG_PARPORT_NOT_PC=y
# CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
CONFIG_AMIGA_FLOPPY=y
CONFIG_AMIGA_Z2RAM=y
-# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -145,56 +448,66 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -206,6 +519,7 @@
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -213,30 +527,34 @@
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
+CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
@@ -244,243 +562,42 @@
CONFIG_A3000_SCSI=y
CONFIG_A2091_SCSI=y
CONFIG_GVP11_SCSI=y
-CONFIG_CYBERSTORM_SCSI=y
-CONFIG_CYBERSTORMII_SCSI=y
-CONFIG_BLZ2060_SCSI=y
-CONFIG_BLZ1230_SCSI=y
-CONFIG_FASTLANE_SCSI=y
-CONFIG_OKTAGON_SCSI=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_SCSI_A4000T=y
+CONFIG_SCSI_ZORRO7XX=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
CONFIG_ARIADNE=m
CONFIG_A2065=m
CONFIG_HYDRA=m
@@ -493,32 +610,24 @@
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
-CONFIG_PLIP=m
+# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
@@ -526,28 +635,28 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -557,7 +666,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -570,6 +678,7 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_AMIGA=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
@@ -577,7 +686,7 @@
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
-CONFIG_MOUSE_AMIGA=y
+CONFIG_MOUSE_AMIGA=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
@@ -603,16 +712,16 @@
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_AMIGA=m
# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
@@ -621,6 +730,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_A2232=m
@@ -638,94 +748,102 @@
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_CIRRUS=m
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=y
CONFIG_FB_AMIGA=y
CONFIG_FB_AMIGA_OCS=y
CONFIG_FB_AMIGA_ECS=y
CONFIG_FB_AMIGA_AGA=y
CONFIG_FB_FM2=y
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_PEARL_8x8=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -733,27 +851,21 @@
CONFIG_SOUND=m
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
@@ -768,10 +880,11 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -782,25 +895,29 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -808,7 +925,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -827,19 +943,18 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=y
+CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
@@ -847,43 +962,39 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -894,10 +1005,6 @@
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -938,35 +1045,42 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
@@ -975,9 +1089,21 @@
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -986,20 +1112,35 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 63024b0..e61196c 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,63 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:27 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:07 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-apollo"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -80,10 +128,24 @@
CONFIG_M68040=y
CONFIG_M68060=y
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -93,134 +155,11 @@
CONFIG_BINFMT_MISC=m
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -230,10 +169,17 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +191,199 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -391,46 +391,154 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
CONFIG_APOLLO_ELPLUS=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -439,28 +547,28 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -470,7 +578,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -483,11 +590,19 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -495,7 +610,7 @@
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -506,6 +621,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -519,90 +635,114 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_COPYAREA is not set
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_APOLLO=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
@@ -615,10 +755,11 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -629,25 +770,29 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -655,7 +800,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -674,13 +818,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -694,44 +837,40 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -741,10 +880,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -785,35 +920,42 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -822,9 +964,21 @@
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -833,20 +987,35 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 6433da2..ba7f971 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,63 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:32 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:09 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-atari"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -80,10 +128,24 @@
CONFIG_M68040=y
CONFIG_M68060=y
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -94,166 +156,11 @@
CONFIG_STRAM_PROC=y
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PARPORT_ATARI=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_ATARI_FLOPPY=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_FALCON_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -263,10 +170,17 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
@@ -275,145 +189,199 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -421,46 +389,189 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (10 or 100Mbit)
+# Wireless
#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_ATARI=m
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_BLK_DEV=y
+CONFIG_ATARI_FLOPPY=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_FALCON_IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATARI_SCSI=y
+# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
+# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_ATARILANCE=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
@@ -470,28 +581,28 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -501,7 +612,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -509,26 +619,37 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_ATARI_KBD_CORE=y
+CONFIG_KEYBOARD_ATARI=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
+CONFIG_MOUSE_ATARI=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_M68K_BEEP=m
-CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
@@ -540,6 +661,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -556,86 +678,97 @@
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_ATY is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_ATARI=y
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ATY is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
@@ -643,27 +776,21 @@
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
@@ -680,38 +807,44 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
+# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-
-#
-# XFS support
-#
+CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -719,7 +852,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -738,13 +870,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -758,42 +889,38 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+CONFIG_SUNRPC_BIND34=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -804,10 +931,6 @@
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -848,35 +971,42 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
@@ -885,9 +1015,21 @@
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -896,20 +1038,35 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index da2a23a..ed98eff 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,63 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:37 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:10 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-bvme6000"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -85,6 +133,22 @@
CONFIG_MMU_MOTOROLA=y
# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -93,134 +157,11 @@
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -230,10 +171,17 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -245,126 +193,186 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -376,13 +384,8 @@
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -390,76 +393,186 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_BVME6000_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
CONFIG_BVME6000_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -469,7 +582,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -482,11 +594,19 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -494,7 +614,7 @@
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -505,6 +625,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -518,59 +639,56 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
@@ -581,27 +699,20 @@
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
@@ -614,10 +725,11 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -628,25 +740,29 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -654,7 +770,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -673,13 +788,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -693,44 +807,40 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -740,10 +850,7 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -784,35 +891,42 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -821,9 +935,21 @@
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -832,20 +958,35 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=m
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=m
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 5125188..38b68c7 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,63 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:41 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:12 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-hp300"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -81,10 +129,24 @@
CONFIG_M68040=y
CONFIG_M68060=y
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -94,134 +156,11 @@
CONFIG_BINFMT_MISC=m
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -231,10 +170,17 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -246,145 +192,199 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -392,46 +392,154 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
CONFIG_HPLANCE=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -440,28 +548,28 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -471,7 +579,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -484,19 +591,35 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_HIL=m
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_M68K_BEEP is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=m
#
# Hardware I/O ports
#
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -507,6 +630,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -520,90 +644,114 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_COPYAREA is not set
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_HP300=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
@@ -614,10 +762,11 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -628,25 +777,29 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -654,7 +807,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -673,13 +825,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -693,44 +844,40 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -740,10 +887,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -784,35 +927,42 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -821,9 +971,21 @@
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -832,20 +994,35 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index ff9dffa..738bca6 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,63 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:45 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:14 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-mac"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -82,10 +130,24 @@
CONFIG_M68040=y
# CONFIG_M68060 is not set
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -95,6 +157,263 @@
CONFIG_BINFMT_MISC=m
# CONFIG_HEARTBEAT is not set
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -103,28 +422,15 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -132,53 +438,50 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
@@ -190,6 +493,7 @@
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -197,58 +501,48 @@
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
-CONFIG_SCSI_MAC_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
CONFIG_ADB_MACII=y
CONFIG_ADB_MACIISI=y
@@ -257,253 +551,65 @@
CONFIG_ADB_CUDA=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MAC8390=y
-CONFIG_MAC89x0=y
-CONFIG_MACSONIC=y
+CONFIG_MAC89x0=m
+CONFIG_MACSONIC=m
CONFIG_MACMACE=y
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -513,7 +619,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -526,19 +631,29 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -549,6 +664,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -562,116 +678,117 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
CONFIG_FB_VALKYRIE=y
CONFIG_FB_MAC=y
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
@@ -685,10 +802,11 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -699,25 +817,29 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -725,7 +847,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -744,13 +865,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -764,43 +884,39 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -808,27 +924,9 @@
#
# Partition Types
#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
+# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -869,46 +967,65 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -917,20 +1034,35 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index f0d5534..f40b172 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,63 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:50 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:17 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-mvme147"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -85,6 +133,22 @@
CONFIG_MMU_MOTOROLA=y
# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -93,135 +157,11 @@
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_MVME147_SCSI=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -231,10 +171,17 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -246,145 +193,199 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -392,46 +393,155 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME147_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
CONFIG_MVME147_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -440,28 +550,28 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -471,7 +581,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -484,11 +593,19 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -496,7 +613,7 @@
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -507,6 +624,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -520,112 +638,80 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
@@ -638,10 +724,11 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -652,25 +739,29 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -678,7 +769,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -697,15 +787,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -719,44 +806,40 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -766,10 +849,7 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -810,35 +890,42 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -847,9 +934,21 @@
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -858,20 +957,35 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 1d5c46f..e9ccc77 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,63 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:53 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:19 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-mvme16x"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -85,6 +133,22 @@
CONFIG_MMU_MOTOROLA=y
# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -93,134 +157,11 @@
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -230,10 +171,17 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +193,199 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -391,46 +393,156 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME16x_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
CONFIG_MVME16x_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -439,28 +551,28 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -470,7 +582,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -483,11 +594,19 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -495,7 +614,7 @@
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -506,6 +625,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -519,116 +639,85 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
+CONFIG_SERIAL167=y
CONFIG_MVME162_SCC=y
CONFIG_SERIAL_CONSOLE=y
@@ -637,10 +726,11 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -651,25 +741,29 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -677,7 +771,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -696,15 +789,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -718,44 +808,40 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -765,10 +851,7 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -809,35 +892,42 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -846,9 +936,21 @@
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -857,20 +959,35 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 8562386..165658f 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,63 +1,112 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:58 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:20 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-q40"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -80,10 +129,24 @@
CONFIG_M68040=y
CONFIG_M68060=y
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -91,182 +154,15 @@
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
CONFIG_ISA=y
CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_Q40IDE=y
-# CONFIG_IDE_CHIPSETS is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -276,14 +172,18 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
@@ -291,145 +191,199 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -437,29 +391,195 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_Q40IDE=y
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
@@ -468,30 +588,21 @@
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NE2000=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -500,28 +611,28 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -531,7 +642,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -544,22 +654,32 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_Q40KBD=m
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
@@ -571,6 +691,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -584,115 +705,117 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
CONFIG_FB_Q40=y
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
-CONFIG_SOUND=y
-CONFIG_DMASOUND_Q40=y
-CONFIG_DMASOUND=y
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_Q40=m
+CONFIG_DMASOUND=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
@@ -703,10 +826,11 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -717,25 +841,29 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -743,7 +871,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -762,13 +889,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -782,44 +908,39 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -829,10 +950,6 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -873,35 +990,42 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -910,9 +1034,21 @@
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -921,20 +1057,35 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index af903b5..bd2b9c4 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,63 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:35:02 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:22 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+CONFIG_NO_DMA=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-sun3"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -69,10 +117,24 @@
#
CONFIG_M68020=y
CONFIG_MMU_SUN3=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_SINGLE_MEMORY_CHUNK=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -81,134 +143,11 @@
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -218,10 +157,17 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -233,145 +179,199 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -379,47 +379,156 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SUN3_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
CONFIG_SUN3LANCE=y
CONFIG_SUN3_82586=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -428,28 +537,28 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -459,7 +568,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -472,11 +580,19 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -484,7 +600,7 @@
# Hardware I/O ports
#
CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -495,6 +611,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -508,112 +625,113 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
@@ -624,10 +742,11 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -638,25 +757,29 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -664,7 +787,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -683,15 +805,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -705,44 +824,40 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -753,10 +868,6 @@
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -797,35 +908,42 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -834,9 +952,21 @@
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -845,20 +975,34 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 997143b..f18154f 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,63 +1,111 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:35:06 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:23 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-sun3x"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
@@ -80,10 +128,24 @@
# CONFIG_M68040 is not set
# CONFIG_M68060 is not set
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
@@ -92,135 +154,11 @@
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_SUN3X_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -230,10 +168,17 @@
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +190,199 @@
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
@@ -391,46 +390,155 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SUN3X_ESP=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
CONFIG_SUN3LANCE=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Ethernet (1000 Mbit)
+# Wireless LAN
#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -439,28 +547,28 @@
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
@@ -470,7 +578,6 @@
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -483,11 +590,19 @@
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -495,7 +610,7 @@
# Hardware I/O ports
#
CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
@@ -506,6 +621,7 @@
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -519,112 +635,113 @@
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
@@ -635,10 +752,11 @@
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
@@ -649,25 +767,29 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -675,7 +797,6 @@
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
@@ -694,15 +815,12 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
@@ -716,44 +834,40 @@
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
@@ -764,10 +878,6 @@
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
@@ -808,35 +918,42 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
@@ -845,9 +962,21 @@
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
@@ -856,20 +985,35 @@
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig
deleted file mode 100644
index 7d935e4..0000000
--- a/arch/m68k/defconfig
+++ /dev/null
@@ -1,657 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:17 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-CONFIG_AMIGA=y
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ZORRO=y
-# CONFIG_AMIGA_PCMCIA is not set
-# CONFIG_HEARTBEAT is not set
-CONFIG_PROC_HARDWARE=y
-# CONFIG_ZORRO_NAMES is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_AMIGA_FLOPPY=y
-# CONFIG_AMIGA_Z2RAM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_A3000_SCSI=y
-CONFIG_A2091_SCSI=y
-CONFIG_GVP11_SCSI=y
-# CONFIG_CYBERSTORM_SCSI is not set
-# CONFIG_CYBERSTORMII_SCSI is not set
-# CONFIG_BLZ2060_SCSI is not set
-# CONFIG_BLZ1230_SCSI is not set
-# CONFIG_FASTLANE_SCSI is not set
-# CONFIG_OKTAGON_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_AMIGA is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_AMIGA is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_A2232 is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-CONFIG_FB_AMIGA=y
-CONFIG_FB_AMIGA_OCS=y
-CONFIG_FB_AMIGA_ECS=y
-CONFIG_FB_AMIGA_AGA=y
-# CONFIG_FB_FM2 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_AMIGA_BUILTIN_SERIAL=y
-# CONFIG_MULTIFACE_III_TTY is not set
-# CONFIG_GVPIOEXT is not set
-# CONFIG_SERIAL_CONSOLE is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index a806208..7a62a71 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -10,7 +10,7 @@
extra-y += vmlinux.lds
obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
- sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o devres.o
+ sys_m68k.o time.o setup.o m68k_ksyms.o devres.o
devres-y = ../../../kernel/irq/devres.o
diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c
index 6fc69c7..d900e77 100644
--- a/arch/m68k/kernel/m68k_ksyms.c
+++ b/arch/m68k/kernel/m68k_ksyms.c
@@ -1,5 +1,4 @@
#include <linux/module.h>
-#include <asm/semaphore.h>
asmlinkage long long __ashldi3 (long long, int);
asmlinkage long long __ashrdi3 (long long, int);
@@ -15,8 +14,3 @@
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__muldi3);
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
-
diff --git a/arch/m68k/kernel/semaphore.c b/arch/m68k/kernel/semaphore.c
deleted file mode 100644
index d12cbbf..0000000
--- a/arch/m68k/kernel/semaphore.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/semaphore-helper.h>
-
-#ifndef CONFIG_RMW_INSNS
-spinlock_t semaphore_wake_lock;
-#endif
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit. ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore. The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
- wake_one_more(sem);
- wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function. Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible. This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return. If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-
-#define DOWN_HEAD(task_state) \
- \
- \
- current->state = (task_state); \
- add_wait_queue(&sem->wait, &wait); \
- \
- /* \
- * Ok, we're set up. sem->count is known to be less than zero \
- * so we must wait. \
- * \
- * We can let go the lock for purposes of waiting. \
- * We re-acquire it after awaking so as to protect \
- * all semaphore operations. \
- * \
- * If "up()" is called before we call waking_non_zero() then \
- * we will catch it right away. If it is called later then \
- * we will have to go through a wakeup cycle to catch it. \
- * \
- * Multiple waiters contend for the semaphore lock to see \
- * who gets to gate through and who has to wait some more. \
- */ \
- for (;;) {
-
-#define DOWN_TAIL(task_state) \
- current->state = (task_state); \
- } \
- current->state = TASK_RUNNING; \
- remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- DOWN_HEAD(TASK_UNINTERRUPTIBLE)
- if (waking_non_zero(sem))
- break;
- schedule();
- DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
-
- DOWN_HEAD(TASK_INTERRUPTIBLE)
-
- ret = waking_non_zero_interruptible(sem, current);
- if (ret)
- {
- if (ret == 1)
- /* ret != 0 only if we get interrupted -arca */
- ret = 0;
- break;
- }
- schedule();
- DOWN_TAIL(TASK_INTERRUPTIBLE)
- return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
- return waking_non_zero_trylock(sem);
-}
diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile
index 6bbf19f..a18af09 100644
--- a/arch/m68k/lib/Makefile
+++ b/arch/m68k/lib/Makefile
@@ -5,4 +5,4 @@
EXTRA_AFLAGS := -traditional
lib-y := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
- checksum.o string.o semaphore.o uaccess.o
+ checksum.o string.o uaccess.o
diff --git a/arch/m68k/lib/semaphore.S b/arch/m68k/lib/semaphore.S
deleted file mode 100644
index 0215624c..0000000
--- a/arch/m68k/lib/semaphore.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * linux/arch/m68k/lib/semaphore.S
- *
- * Copyright (C) 1996 Linus Torvalds
- *
- * m68k version by Andreas Schwab
- */
-
-#include <linux/linkage.h>
-#include <asm/semaphore.h>
-
-/*
- * The semaphore operations have a special calling sequence that
- * allow us to do a simpler in-line version of them. These routines
- * need to convert that sequence back into the C sequence when
- * there is contention on the semaphore.
- */
-ENTRY(__down_failed)
- moveml %a0/%d0/%d1,-(%sp)
- movel %a1,-(%sp)
- jbsr __down
- movel (%sp)+,%a1
- moveml (%sp)+,%a0/%d0/%d1
- rts
-
-ENTRY(__down_failed_interruptible)
- movel %a0,-(%sp)
- movel %d1,-(%sp)
- movel %a1,-(%sp)
- jbsr __down_interruptible
- movel (%sp)+,%a1
- movel (%sp)+,%d1
- movel (%sp)+,%a0
- rts
-
-ENTRY(__down_failed_trylock)
- movel %a0,-(%sp)
- movel %d1,-(%sp)
- movel %a1,-(%sp)
- jbsr __down_trylock
- movel (%sp)+,%a1
- movel (%sp)+,%d1
- movel (%sp)+,%a0
- rts
-
-ENTRY(__up_wakeup)
- moveml %a0/%d0/%d1,-(%sp)
- movel %a1,-(%sp)
- jbsr __up
- movel (%sp)+,%a1
- moveml (%sp)+,%a0/%d0/%d1
- rts
-
diff --git a/arch/m68knommu/kernel/Makefile b/arch/m68knommu/kernel/Makefile
index 1524b39..f0eab3d 100644
--- a/arch/m68knommu/kernel/Makefile
+++ b/arch/m68knommu/kernel/Makefile
@@ -5,7 +5,7 @@
extra-y := vmlinux.lds
obj-y += dma.o entry.o init_task.o irq.o m68k_ksyms.o process.o ptrace.o \
- semaphore.o setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o
+ setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_COMEMPCI) += comempci.o
diff --git a/arch/m68knommu/kernel/m68k_ksyms.c b/arch/m68knommu/kernel/m68k_ksyms.c
index 53fad14..39fe0a7 100644
--- a/arch/m68knommu/kernel/m68k_ksyms.c
+++ b/arch/m68knommu/kernel/m68k_ksyms.c
@@ -13,7 +13,6 @@
#include <asm/pgalloc.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/semaphore.h>
#include <asm/checksum.h>
#include <asm/current.h>
@@ -39,11 +38,6 @@
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
-
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
diff --git a/arch/m68knommu/kernel/semaphore.c b/arch/m68knommu/kernel/semaphore.c
deleted file mode 100644
index bce2bc7..0000000
--- a/arch/m68knommu/kernel/semaphore.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <asm/semaphore-helper.h>
-
-#ifndef CONFIG_RMW_INSNS
-spinlock_t semaphore_wake_lock;
-#endif
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit. ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore. The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
- wake_one_more(sem);
- wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function. Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible. This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return. If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-
-#define DOWN_HEAD(task_state) \
- \
- \
- current->state = (task_state); \
- add_wait_queue(&sem->wait, &wait); \
- \
- /* \
- * Ok, we're set up. sem->count is known to be less than zero \
- * so we must wait. \
- * \
- * We can let go the lock for purposes of waiting. \
- * We re-acquire it after awaking so as to protect \
- * all semaphore operations. \
- * \
- * If "up()" is called before we call waking_non_zero() then \
- * we will catch it right away. If it is called later then \
- * we will have to go through a wakeup cycle to catch it. \
- * \
- * Multiple waiters contend for the semaphore lock to see \
- * who gets to gate through and who has to wait some more. \
- */ \
- for (;;) {
-
-#define DOWN_TAIL(task_state) \
- current->state = (task_state); \
- } \
- current->state = TASK_RUNNING; \
- remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- DOWN_HEAD(TASK_UNINTERRUPTIBLE)
- if (waking_non_zero(sem))
- break;
- schedule();
- DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- DECLARE_WAITQUEUE(wait, current);
- int ret = 0;
-
- DOWN_HEAD(TASK_INTERRUPTIBLE)
-
- ret = waking_non_zero_interruptible(sem, current);
- if (ret)
- {
- if (ret == 1)
- /* ret != 0 only if we get interrupted -arca */
- ret = 0;
- break;
- }
- schedule();
- DOWN_TAIL(TASK_INTERRUPTIBLE)
- return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
- return waking_non_zero_trylock(sem);
-}
diff --git a/arch/m68knommu/lib/Makefile b/arch/m68knommu/lib/Makefile
index e051a79..d94d709 100644
--- a/arch/m68knommu/lib/Makefile
+++ b/arch/m68knommu/lib/Makefile
@@ -4,4 +4,4 @@
lib-y := ashldi3.o ashrdi3.o lshrdi3.o \
muldi3.o mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
- checksum.o semaphore.o memcpy.o memset.o delay.o
+ checksum.o memcpy.o memset.o delay.o
diff --git a/arch/m68knommu/lib/semaphore.S b/arch/m68knommu/lib/semaphore.S
deleted file mode 100644
index 87c7460..0000000
--- a/arch/m68knommu/lib/semaphore.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/arch/m68k/lib/semaphore.S
- *
- * Copyright (C) 1996 Linus Torvalds
- *
- * m68k version by Andreas Schwab
- *
- * MAR/1999 -- modified to support ColdFire (gerg@snapgear.com)
- */
-
-#include <linux/linkage.h>
-#include <asm/semaphore.h>
-
-/*
- * "down_failed" is called with the eventual return address
- * in %a0, and the address of the semaphore in %a1. We need
- * to increment the number of waiters on the semaphore,
- * call "__down()", and then eventually return to try again.
- */
-ENTRY(__down_failed)
-#ifdef CONFIG_COLDFIRE
- subl #12,%sp
- moveml %a0/%d0/%d1,(%sp)
-#else
- moveml %a0/%d0/%d1,-(%sp)
-#endif
- movel %a1,-(%sp)
- jbsr __down
- movel (%sp)+,%a1
- movel (%sp)+,%d0
- movel (%sp)+,%d1
- rts
-
-ENTRY(__down_failed_interruptible)
- movel %a0,-(%sp)
- movel %d1,-(%sp)
- movel %a1,-(%sp)
- jbsr __down_interruptible
- movel (%sp)+,%a1
- movel (%sp)+,%d1
- rts
-
-ENTRY(__up_wakeup)
-#ifdef CONFIG_COLDFIRE
- subl #12,%sp
- moveml %a0/%d0/%d1,(%sp)
-#else
- moveml %a0/%d0/%d1,-(%sp)
-#endif
- movel %a1,-(%sp)
- jbsr __up
- movel (%sp)+,%a1
- movel (%sp)+,%d0
- movel (%sp)+,%d1
- rts
-
-ENTRY(__down_failed_trylock)
- movel %a0,-(%sp)
- movel %d1,-(%sp)
- movel %a1,-(%sp)
- jbsr __down_trylock
- movel (%sp)+,%a1
- movel (%sp)+,%d1
- movel (%sp)+,%a0
- rts
-
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 72097da..1c62381 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -482,10 +482,13 @@
# be 16kb aligned or the handling of the current variable will break.
# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
#
-#core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o
+ifdef CONFIG_SGI_IP28
+ ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
+ $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+ endif
+endif
core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/
cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28
-#cflags-$(CONFIG_SGI_IP28) += -Iinclude/asm-mips/mach-ip28
load-$(CONFIG_SGI_IP28) += 0xa800000020004000
#
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index d8df5fd..5c0d35d 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -22,24 +22,24 @@
/* With some thought, we can probably use the mask to reduce the
* size of the table.
*/
-struct cpu_spec cpu_specs[] = {
- { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0 },
- { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0 },
- { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0 },
- { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1 },
- { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1 },
- { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1 },
- { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1 },
- { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1 },
- { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1 },
- { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1 },
- { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1 },
- { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
- { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
- { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
- { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
- { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
- { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
+struct cpu_spec cpu_specs[] = {
+ { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
+ { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
+ { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
+ { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
+ { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
+ { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
+ { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
+ { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
+ { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
+ { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
+ { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
+ { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
+ { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
+ { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
+ { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
+ { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
+ { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
};
void
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 841904c..39d6812 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -189,7 +189,7 @@
static struct resource au1200_ide0_resources[] = {
[0] = {
.start = AU1XXX_ATA_PHYS_ADDR,
- .end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN,
+ .end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index d885e38..9e4ab80 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -57,7 +57,7 @@
{
struct cpu_spec *sp;
char *argptr;
- unsigned long prid, cpupll, bclk = 1;
+ unsigned long prid, cpufreq, bclk = 1;
set_cpuspec();
sp = cur_cpu_spec[0];
@@ -65,8 +65,15 @@
board_setup(); /* board specific setup */
prid = read_c0_prid();
- cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
- printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll);
+ if (sp->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+ cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
+#else
+ cpufreq = 396;
+#endif
+ else
+ cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
+ printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
bclk = sp->cpu_bclk;
if (bclk)
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index f113b51..e122bbc 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -209,18 +209,22 @@
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
-
- cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
- AU1000_SRC_CLK;
- }
- else {
- /* The 32KHz oscillator isn't running, so assume there
- * isn't one and grab the processor speed from the PLL.
- * NOTE: some old silicon doesn't allow reading the PLL.
- */
- cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
+ } else
no_au1xxx_32khz = 1;
- }
+
+ /*
+ * On early Au1000, sys_cpupll was write-only. Since these
+ * silicon versions of Au1000 are not sold by AMD, we don't bend
+ * over backwards trying to determine the frequency.
+ */
+ if (cur_cpu_spec[0]->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+ cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+ cpu_speed = 396000000;
+#endif
+ else
+ cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
mips_hpt_frequency = cpu_speed;
// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index a9237f4..b2e413e 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -33,11 +33,10 @@
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
-#include <asm/keyboard.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
void board_reset(void)
{
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index 3893492..a343da1 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -45,7 +45,7 @@
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index abf70d7..3b42cea 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,58 +1,48 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:22 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 08:11:19 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-CONFIG_SIBYTE_BIGSUR=y
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+CONFIG_SIBYTE_BIGSUR=y
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_SIBYTE_BCM1x80=y
CONFIG_SIBYTE_SB1xxx_SOC=y
# CONFIG_CPU_SB1_PASS_1 is not set
@@ -68,9 +58,11 @@
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -81,11 +73,17 @@
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_CEVT_BCM1480=y
CONFIG_CSRC_BCM1480=y
+CONFIG_CFE=y
CONFIG_DMA_COHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,10 +91,6 @@
#
# CPU selection
#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
@@ -137,14 +131,15 @@
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_IRQ_PER_CPU=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -152,13 +147,19 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
CONFIG_SMP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_4=y
CONFIG_NR_CPUS=4
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
@@ -171,38 +172,45 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
@@ -211,24 +219,33 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -236,12 +253,10 @@
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
@@ -255,6 +270,7 @@
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -262,23 +278,19 @@
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+CONFIG_ZONE_DMA32=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
@@ -292,7 +304,6 @@
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# Networking
@@ -302,7 +313,6 @@
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -310,10 +320,11 @@
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
@@ -322,41 +333,141 @@
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
#
-# DCCP Configuration (EXPERIMENTAL)
+# Core Netfilter Configuration
#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -369,10 +480,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -380,9 +487,21 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -391,85 +510,70 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
@@ -495,87 +599,196 @@
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
# CONFIG_BLK_DEV_IDE_SWARM is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_ATA is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
-# Multi-device support (RAID and LVM)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+CONFIG_PATA_SIL680=y
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
#
-# PHY device support
+# MII PHY device drivers
#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -585,52 +798,53 @@
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -660,17 +874,16 @@
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+# CONFIG_NOZOMI is not set
#
# Serial drivers
@@ -680,39 +893,24 @@
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
@@ -736,29 +934,30 @@
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
CONFIG_I2C_SIBYTE=y
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-CONFIG_SENSORS_DS1374=y
+# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
CONFIG_SENSORS_PCF8574=y
-CONFIG_SENSORS_PCA9539=y
+# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=y
+# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=y
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
@@ -769,43 +968,49 @@
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Hardware Monitoring support
+# Sonics Silicon Backplane
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -814,104 +1019,73 @@
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
+# Userspace I/O
#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
#
# File systems
#
-CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
#
# Pseudo filesystems
@@ -923,7 +1097,6 @@
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
@@ -939,14 +1112,13 @@
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -958,6 +1130,7 @@
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -965,37 +1138,61 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1003,8 +1200,8 @@
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
@@ -1014,15 +1211,19 @@
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SB1XXX_CORELIS is not set
@@ -1034,23 +1235,22 @@
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
@@ -1058,39 +1258,50 @@
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 9e78e1a..6fcdb6f 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -5,7 +5,7 @@
extra-y := head.o init_task.o vmlinux.lds
obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
- ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \
+ ptrace.o reset.o setup.o signal.o syscall.o \
time.o topology.o traps.o unaligned.o
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index 3191afa..25f4eab 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -139,7 +139,6 @@
#include <asm/system.h>
#include <asm/gdb-stub.h>
#include <asm/inst.h>
-#include <asm/smp.h>
/*
* external low-level support routines
@@ -656,6 +655,7 @@
*epc = (unsigned long)async_breakpoint;
}
+#ifdef CONFIG_SMP
static void kgdb_wait(void *arg)
{
unsigned flags;
@@ -668,6 +668,7 @@
local_irq_restore(flags);
}
+#endif
/*
* GDB stub needs to call kgdb_wait on all processor with interrupts
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index fc4aa07..38fa1a1 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -15,6 +15,7 @@
#include <asm/time.h>
DEFINE_SPINLOCK(i8253_lock);
+EXPORT_SYMBOL(i8253_lock);
/*
* Initialize the PIT timer.
diff --git a/arch/mips/kernel/semaphore.c b/arch/mips/kernel/semaphore.c
deleted file mode 100644
index 1265358..0000000
--- a/arch/mips/kernel/semaphore.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * MIPS-specific semaphore code.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- * Copyright (C) 2004 Ralf Baechle <ralf@linux-mips.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * April 2001 - Reworked by Paul Mackerras <paulus@samba.org>
- * to eliminate the SMP races in the old version between the updates
- * of `count' and `waking'. Now we use negative `count' values to
- * indicate that some process(es) are waiting for the semaphore.
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/atomic.h>
-#include <asm/cpu-features.h>
-#include <asm/errno.h>
-#include <asm/semaphore.h>
-#include <asm/war.h>
-/*
- * Atomically update sem->count.
- * This does the equivalent of the following:
- *
- * old_count = sem->count;
- * tmp = MAX(old_count, 0) + incr;
- * sem->count = tmp;
- * return old_count;
- *
- * On machines without lld/scd we need a spinlock to make the manipulation of
- * sem->count and sem->waking atomic. Scalability isn't an issue because
- * this lock is used on UP only so it's just an empty variable.
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
- int old_count, tmp;
-
- if (cpu_has_llsc && R10000_LLSC_WAR) {
- __asm__ __volatile__(
- " .set mips3 \n"
- "1: ll %0, %2 # __sem_update_count \n"
- " sra %1, %0, 31 \n"
- " not %1 \n"
- " and %1, %0, %1 \n"
- " addu %1, %1, %3 \n"
- " sc %1, %2 \n"
- " beqzl %1, 1b \n"
- " .set mips0 \n"
- : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
- : "r" (incr), "m" (sem->count));
- } else if (cpu_has_llsc) {
- __asm__ __volatile__(
- " .set mips3 \n"
- "1: ll %0, %2 # __sem_update_count \n"
- " sra %1, %0, 31 \n"
- " not %1 \n"
- " and %1, %0, %1 \n"
- " addu %1, %1, %3 \n"
- " sc %1, %2 \n"
- " beqz %1, 1b \n"
- " .set mips0 \n"
- : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
- : "r" (incr), "m" (sem->count));
- } else {
- static DEFINE_SPINLOCK(semaphore_lock);
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_lock, flags);
- old_count = atomic_read(&sem->count);
- tmp = max_t(int, old_count, 0) + incr;
- atomic_set(&sem->count, tmp);
- spin_unlock_irqrestore(&semaphore_lock, flags);
- }
-
- return old_count;
-}
-
-void __up(struct semaphore *sem)
-{
- /*
- * Note that we incremented count in up() before we came here,
- * but that was ineffective since the result was <= 0, and
- * any negative value of count is equivalent to 0.
- * This ends up setting count to 1, unless count is now > 0
- * (i.e. because some other cpu has called up() in the meantime),
- * in which case we just increment count.
- */
- __sem_update_count(sem, 1);
- wake_up(&sem->wait);
-}
-
-EXPORT_SYMBOL(__up);
-
-/*
- * Note that when we come in to __down or __down_interruptible,
- * we have already decremented count, but that decrement was
- * ineffective since the result was < 0, and any negative value
- * of count is equivalent to 0.
- * Thus it is only when we decrement count from some value > 0
- * that we have actually got the semaphore.
- */
-void __sched __down(struct semaphore *sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
- __set_task_state(tsk, TASK_UNINTERRUPTIBLE);
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- /*
- * Try to get the semaphore. If the count is > 0, then we've
- * got the semaphore; we decrement count and exit the loop.
- * If the count is 0 or negative, we set it to -1, indicating
- * that we are asleep, and then sleep.
- */
- while (__sem_update_count(sem, -1) <= 0) {
- schedule();
- set_task_state(tsk, TASK_UNINTERRUPTIBLE);
- }
- remove_wait_queue(&sem->wait, &wait);
- __set_task_state(tsk, TASK_RUNNING);
-
- /*
- * If there are any more sleepers, wake one of them up so
- * that it can either get the semaphore, or set count to -1
- * indicating that there are still processes sleeping.
- */
- wake_up(&sem->wait);
-}
-
-EXPORT_SYMBOL(__down);
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
- __set_task_state(tsk, TASK_INTERRUPTIBLE);
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- while (__sem_update_count(sem, -1) <= 0) {
- if (signal_pending(current)) {
- /*
- * A signal is pending - give up trying.
- * Set sem->count to 0 if it is negative,
- * since we are no longer sleeping.
- */
- __sem_update_count(sem, 0);
- retval = -EINTR;
- break;
- }
- schedule();
- set_task_state(tsk, TASK_INTERRUPTIBLE);
- }
- remove_wait_queue(&sem->wait, &wait);
- __set_task_state(tsk, TASK_RUNNING);
-
- wake_up(&sem->wait);
- return retval;
-}
-
-EXPORT_SYMBOL(__down_interruptible);
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 9f85d4c..b45a709 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -157,6 +157,6 @@
{
plat_time_init();
- if (mips_clockevent_init() || !cpu_has_mfc0_count_bug())
+ if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug())
init_mips_clocksource();
}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index eed2dc4..39804c5 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -262,13 +262,21 @@
/* Find some VPE program space */
static void *alloc_progmem(unsigned long len)
{
+ void *addr;
+
#ifdef CONFIG_MIPS_VPE_LOADER_TOM
- /* this means you must tell linux to use less memory than you physically have */
- return pfn_to_kaddr(max_pfn);
+ /*
+ * This means you must tell Linux to use less memory than you
+ * physically have, for example by passing a mem= boot argument.
+ */
+ addr = pfn_to_kaddr(max_pfn);
+ memset(addr, 0, len);
#else
- // simple grab some mem for now
- return kmalloc(len, GFP_KERNEL);
+ /* simple grab some mem for now */
+ addr = kzalloc(len, GFP_KERNEL);
#endif
+
+ return addr;
}
static void release_progmem(void *ptr)
@@ -884,9 +892,10 @@
}
v->load_addr = alloc_progmem(mod.core_size);
- memset(v->load_addr, 0, mod.core_size);
+ if (!v->load_addr)
+ return -ENOMEM;
- printk("VPE loader: loading to %p\n", v->load_addr);
+ pr_info("VPE loader: loading to %p\n", v->load_addr);
if (relocate) {
for (i = 0; i < hdr->e_shnum; i++) {
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 6496925..77aefb4 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -361,6 +361,16 @@
#endif
}
+static void r4k__flush_cache_vmap(void)
+{
+ r4k_blast_dcache();
+}
+
+static void r4k__flush_cache_vunmap(void)
+{
+ r4k_blast_dcache();
+}
+
static inline void local_r4k_flush_cache_range(void * args)
{
struct vm_area_struct *vma = args;
@@ -1281,6 +1291,10 @@
PAGE_SIZE - 1);
else
shm_align_mask = PAGE_SIZE-1;
+
+ __flush_cache_vmap = r4k__flush_cache_vmap;
+ __flush_cache_vunmap = r4k__flush_cache_vunmap;
+
flush_cache_all = cache_noop;
__flush_cache_all = r4k___flush_cache_all;
flush_cache_mm = r4k_flush_cache_mm;
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index b09d569..a9f7f1f 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -122,6 +122,16 @@
local_irq_restore(flags);
}
+static void tx39__flush_cache_vmap(void)
+{
+ tx39_blast_dcache();
+}
+
+static void tx39__flush_cache_vunmap(void)
+{
+ tx39_blast_dcache();
+}
+
static inline void tx39_flush_cache_all(void)
{
if (!cpu_has_dc_aliases)
@@ -344,6 +354,8 @@
switch (current_cpu_type()) {
case CPU_TX3912:
/* TX39/H core (writethru direct-map cache) */
+ __flush_cache_vmap = tx39__flush_cache_vmap;
+ __flush_cache_vunmap = tx39__flush_cache_vunmap;
flush_cache_all = tx39h_flush_icache_all;
__flush_cache_all = tx39h_flush_icache_all;
flush_cache_mm = (void *) tx39h_flush_icache_all;
@@ -369,6 +381,9 @@
write_c0_wired(0); /* set 8 on reset... */
/* board-dependent init code may set WBON */
+ __flush_cache_vmap = tx39__flush_cache_vmap;
+ __flush_cache_vunmap = tx39__flush_cache_vunmap;
+
flush_cache_all = tx39_flush_cache_all;
__flush_cache_all = tx39___flush_cache_all;
flush_cache_mm = tx39_flush_cache_mm;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 51ab1fa..f590367 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -30,6 +30,9 @@
unsigned long pfn);
void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*__flush_cache_vmap)(void);
+void (*__flush_cache_vunmap)(void);
+
/* MIPS specific cache operations */
void (*flush_cache_sigtramp)(unsigned long addr);
void (*local_flush_data_cache_page)(void * addr);
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 3a93d4c..382738c 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -307,6 +307,7 @@
case CPU_R12000:
case CPU_R14000:
case CPU_4KC:
+ case CPU_4KEC:
case CPU_SB1:
case CPU_SB1A:
case CPU_4KSC:
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index ab68c43..87e2c8f 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -185,8 +185,8 @@
static struct resource bcm1480_io_resource = {
.name = "BCM1480 PCI I/O",
- .start = 0x2c000000UL,
- .end = 0x2dffffffUL,
+ .start = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
+ .end = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL,
.flags = IORESOURCE_IO,
};
@@ -194,6 +194,7 @@
.pci_ops = &bcm1480_pci_ops,
.mem_resource = &bcm1480_mem_resource,
.io_resource = &bcm1480_io_resource,
+ .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
};
@@ -251,6 +252,7 @@
bcm1480_controller.io_map_base = (unsigned long)
ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
+ bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
set_io_port_base(bcm1480_controller.io_map_base);
isa_slot_offset = (unsigned long)
ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
index 005e7fe..f54f454 100644
--- a/arch/mips/pci/pci-bcm1480ht.c
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -180,8 +180,8 @@
static struct resource bcm1480ht_io_resource = {
.name = "BCM1480 HT I/O",
- .start = 0x00000000UL,
- .end = 0x01ffffffUL,
+ .start = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
+ .end = A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL,
.flags = IORESOURCE_IO,
};
@@ -191,29 +191,22 @@
.io_resource = &bcm1480ht_io_resource,
.index = 1,
.get_busno = bcm1480ht_pcibios_get_busno,
+ .io_offset = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
};
static int __init bcm1480ht_pcibios_init(void)
{
- uint32_t cmdreg;
-
ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
- /*
- * See if the PCI bus has been configured by the firmware.
- */
- cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
- PCI_COMMAND));
- if (!(cmdreg & PCI_COMMAND_MASTER)) {
- printk("HT: Skipping HT probe. Bus is not initialized.\n");
- iounmap(ht_cfg_space);
- return 1; /* XXX */
- }
+ /* CFE doesn't always init all HT paths, so we always scan */
bcm1480ht_bus_status |= PCI_BUS_ENABLED;
ht_eoi_space = (unsigned long)
ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
4 * 1024 * 1024);
+ bcm1480ht_controller.io_map_base = (unsigned long)
+ ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536);
+ bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset;
register_pci_controller(&bcm1480ht_controller);
diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile
index ef07c95..23f2ab6 100644
--- a/arch/mn10300/kernel/Makefile
+++ b/arch/mn10300/kernel/Makefile
@@ -3,7 +3,7 @@
#
extra-y := head.o init_task.o vmlinux.lds
-obj-y := process.o semaphore.o signal.o entry.o fpu.o traps.o irq.o \
+obj-y := process.o signal.o entry.o fpu.o traps.o irq.o \
ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \
switch_to.o mn10300_ksyms.o kernel_execve.o
diff --git a/arch/mn10300/kernel/semaphore.c b/arch/mn10300/kernel/semaphore.c
deleted file mode 100644
index 9153c40..0000000
--- a/arch/mn10300/kernel/semaphore.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* MN10300 Semaphore implementation
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <asm/semaphore.h>
-
-struct sem_waiter {
- struct list_head list;
- struct task_struct *task;
-};
-
-#if SEMAPHORE_DEBUG
-void semtrace(struct semaphore *sem, const char *str)
-{
- if (sem->debug)
- printk(KERN_DEBUG "[%d] %s({%d,%d})\n",
- current->pid,
- str,
- atomic_read(&sem->count),
- list_empty(&sem->wait_list) ? 0 : 1);
-}
-#else
-#define semtrace(SEM, STR) do { } while (0)
-#endif
-
-/*
- * wait for a token to be granted from a semaphore
- * - entered with lock held and interrupts disabled
- */
-void __down(struct semaphore *sem, unsigned long flags)
-{
- struct task_struct *tsk = current;
- struct sem_waiter waiter;
-
- semtrace(sem, "Entering __down");
-
- /* set up my own style of waitqueue */
- waiter.task = tsk;
- get_task_struct(tsk);
-
- list_add_tail(&waiter.list, &sem->wait_list);
-
- /* we don't need to touch the semaphore struct anymore */
- spin_unlock_irqrestore(&sem->wait_lock, flags);
-
- /* wait to be given the semaphore */
- set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-
- for (;;) {
- if (!waiter.task)
- break;
- schedule();
- set_task_state(tsk, TASK_UNINTERRUPTIBLE);
- }
-
- tsk->state = TASK_RUNNING;
- semtrace(sem, "Leaving __down");
-}
-EXPORT_SYMBOL(__down);
-
-/*
- * interruptibly wait for a token to be granted from a semaphore
- * - entered with lock held and interrupts disabled
- */
-int __down_interruptible(struct semaphore *sem, unsigned long flags)
-{
- struct task_struct *tsk = current;
- struct sem_waiter waiter;
- int ret;
-
- semtrace(sem, "Entering __down_interruptible");
-
- /* set up my own style of waitqueue */
- waiter.task = tsk;
- get_task_struct(tsk);
-
- list_add_tail(&waiter.list, &sem->wait_list);
-
- /* we don't need to touch the semaphore struct anymore */
- set_task_state(tsk, TASK_INTERRUPTIBLE);
-
- spin_unlock_irqrestore(&sem->wait_lock, flags);
-
- /* wait to be given the semaphore */
- ret = 0;
- for (;;) {
- if (!waiter.task)
- break;
- if (unlikely(signal_pending(current)))
- goto interrupted;
- schedule();
- set_task_state(tsk, TASK_INTERRUPTIBLE);
- }
-
- out:
- tsk->state = TASK_RUNNING;
- semtrace(sem, "Leaving __down_interruptible");
- return ret;
-
- interrupted:
- spin_lock_irqsave(&sem->wait_lock, flags);
- list_del(&waiter.list);
- spin_unlock_irqrestore(&sem->wait_lock, flags);
-
- ret = 0;
- if (!waiter.task) {
- put_task_struct(current);
- ret = -EINTR;
- }
- goto out;
-}
-EXPORT_SYMBOL(__down_interruptible);
-
-/*
- * release a single token back to a semaphore
- * - entered with lock held and interrupts disabled
- */
-void __up(struct semaphore *sem)
-{
- struct task_struct *tsk;
- struct sem_waiter *waiter;
-
- semtrace(sem, "Entering __up");
-
- /* grant the token to the process at the front of the queue */
- waiter = list_entry(sem->wait_list.next, struct sem_waiter, list);
-
- /* We must be careful not to touch 'waiter' after we set ->task = NULL.
- * It is an allocated on the waiter's stack and may become invalid at
- * any time after that point (due to a wakeup from another source).
- */
- list_del_init(&waiter->list);
- tsk = waiter->task;
- smp_mb();
- waiter->task = NULL;
- wake_up_process(tsk);
- put_task_struct(tsk);
-
- semtrace(sem, "Leaving __up");
-}
-EXPORT_SYMBOL(__up);
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 27827bc..1f6585a 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -9,7 +9,7 @@
obj-y := cache.o pacache.o setup.o traps.o time.o irq.o \
pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \
- ptrace.o hardware.o inventory.o drivers.o semaphore.o \
+ ptrace.o hardware.o inventory.o drivers.o \
signal.o hpmc.o real2.o parisc_ksyms.o unaligned.o \
process.o processor.o pdc_cons.o pdc_chassis.o unwind.o \
topology.o
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index 7aca704..5b7fc4a 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -69,11 +69,6 @@
EXPORT_SYMBOL(memcpy_fromio);
EXPORT_SYMBOL(memset_io);
-#include <asm/semaphore.h>
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__down);
-
extern void $$divI(void);
extern void $$divU(void);
extern void $$remI(void);
diff --git a/arch/parisc/kernel/semaphore.c b/arch/parisc/kernel/semaphore.c
deleted file mode 100644
index ee806bc..0000000
--- a/arch/parisc/kernel/semaphore.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Semaphore implementation Copyright (c) 2001 Matthew Wilcox, Hewlett-Packard
- */
-
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-/*
- * Semaphores are complex as we wish to avoid using two variables.
- * `count' has multiple roles, depending on its value. If it is positive
- * or zero, there are no waiters. The functions here will never be
- * called; see <asm/semaphore.h>
- *
- * When count is -1 it indicates there is at least one task waiting
- * for the semaphore.
- *
- * When count is less than that, there are '- count - 1' wakeups
- * pending. ie if it has value -3, there are 2 wakeups pending.
- *
- * Note that these functions are only called when there is contention
- * on the lock, and as such all this is the "non-critical" part of the
- * whole semaphore business. The critical part is the inline stuff in
- * <asm/semaphore.h> where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
- sem->count--;
- wake_up(&sem->wait);
-}
-
-#define wakers(count) (-1 - count)
-
-#define DOWN_HEAD \
- int ret = 0; \
- DECLARE_WAITQUEUE(wait, current); \
- \
- /* Note that someone is waiting */ \
- if (sem->count == 0) \
- sem->count = -1; \
- \
- /* protected by the sentry still -- use unlocked version */ \
- wait.flags = WQ_FLAG_EXCLUSIVE; \
- __add_wait_queue_tail(&sem->wait, &wait); \
- lost_race: \
- spin_unlock_irq(&sem->sentry); \
-
-#define DOWN_TAIL \
- spin_lock_irq(&sem->sentry); \
- if (wakers(sem->count) == 0 && ret == 0) \
- goto lost_race; /* Someone stole our wakeup */ \
- __remove_wait_queue(&sem->wait, &wait); \
- current->state = TASK_RUNNING; \
- if (!waitqueue_active(&sem->wait) && (sem->count < 0)) \
- sem->count = wakers(sem->count);
-
-#define UPDATE_COUNT \
- sem->count += (sem->count < 0) ? 1 : - 1;
-
-
-void __sched __down(struct semaphore * sem)
-{
- DOWN_HEAD
-
- for(;;) {
- set_task_state(current, TASK_UNINTERRUPTIBLE);
- /* we can _read_ this without the sentry */
- if (sem->count != -1)
- break;
- schedule();
- }
-
- DOWN_TAIL
- UPDATE_COUNT
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- DOWN_HEAD
-
- for(;;) {
- set_task_state(current, TASK_INTERRUPTIBLE);
- /* we can _read_ this without the sentry */
- if (sem->count != -1)
- break;
-
- if (signal_pending(current)) {
- ret = -EINTR;
- break;
- }
- schedule();
- }
-
- DOWN_TAIL
-
- if (!ret) {
- UPDATE_COUNT
- }
-
- return ret;
-}
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 58fccc9..06213d1 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -534,7 +534,8 @@
* Flushing one cacheline is cheap.
* "sync" on bigger (> 4 way) boxes is not.
*/
- flush_icache_range(regs->gr[30], regs->gr[30] + 4);
+ flush_user_dcache_range(regs->gr[30], regs->gr[30] + 4);
+ flush_user_icache_range(regs->gr[30], regs->gr[30] + 4);
regs->gr[31] = regs->gr[30] + 8;
/* Preserve original r28. */
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index 30737ea..c6ca631 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -212,13 +212,30 @@
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <3000 800>;
+ reg = <3000 400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <3000 400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ interrupt-parent = <&mpc5200_pic>;
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ };
};
i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
@@ -231,4 +248,22 @@
reg = <8000 4000>;
};
};
+
+ lpb {
+ model = "fsl,lpb";
+ compatible = "fsl,lpb";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 fc000000 2000000>;
+
+ // 16-bit flash device at LocalPlus Bus CS0
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 2000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
+ };
};
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 0d701c1..09b4e16 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -258,6 +258,21 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-mdio";
+ reg = <3000 400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ interrupt-parent = <&mpc5200_pic>;
+
+ phy0:ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ reg = <1>;
+ };
};
ata@3a00 {
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 76951ab..2b0dde0 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -148,7 +148,6 @@
interrupt-parent = <&mpc5200_pic>;
};
-
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <f00 20>;
@@ -209,10 +208,25 @@
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <3000 800>;
+ reg = <3000 400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <3000 400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ interrupt-parent = <&mpc5200_pic>;
+
+ phy0: ethernet-phy@2 {
+ device_type = "ethernet-phy";
+ reg = <2>;
+ };
};
ata@3a00 {
@@ -223,11 +237,19 @@
};
i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
+
+ rtc@68 {
+ device_type = "rtc";
+ compatible = "dallas,ds1339";
+ reg = <68>;
+ };
};
sram@8000 {
@@ -240,7 +262,8 @@
compatible = "fsl,lpb";
#address-cells = <2>;
#size-cells = <1>;
- ranges = <1 0 50000000 00010000
+ ranges = <0 0 ff000000 01000000
+ 1 0 50000000 00010000
2 0 50010000 00010000
3 0 50020000 00010000>;
@@ -271,31 +294,15 @@
compatible = "promess,pro_module_dio";
reg = <3 800 2>;
};
- };
- pci@f0000d00 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
- reg = <f0000d00 100>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
- c000 0 0 2 &mpc5200_pic 1 1 3
- c000 0 0 3 &mpc5200_pic 1 2 3
- c000 0 0 4 &mpc5200_pic 1 3 3
-
- c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
- c800 0 0 2 &mpc5200_pic 1 2 3
- c800 0 0 3 &mpc5200_pic 1 3 3
- c800 0 0 4 &mpc5200_pic 0 0 3>;
- clock-frequency = <0>; // From boot loader
- interrupts = <2 8 0 2 9 0 2 a 0>;
- interrupt-parent = <&mpc5200_pic>;
- bus-range = <0 0>;
- ranges = <42000000 0 80000000 80000000 0 20000000
- 02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 b0000000 0 01000000>;
+ // 16-bit flash device at LocalPlus Bus CS0
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 49c05e9..eac8e1b 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -255,14 +255,14 @@
};
sata@18000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
};
sata@19000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 440aa4d..5bc09ad 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -143,7 +143,6 @@
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi";
+ phy_type = "ulpi";
};
mdio@24520 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 9271153..711f9a3 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -143,7 +143,6 @@
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi";
+ phy_type = "ulpi";
};
mdio@24520 {
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index fdb4a92..6f78a9f 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -255,28 +255,28 @@
};
sata@18000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
};
sata@19000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
};
sata@1a000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x1a000 0x1000>;
interrupts = <46 0x8>;
interrupt-parent = <&ipic>;
};
sata@1b000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x1b000 0x1000>;
interrupts = <47 0x8>;
interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 0dda2fc..c11ceb7 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -143,7 +143,6 @@
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi";
+ phy_type = "ulpi";
};
mdio@24520 {
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index c86464f..65bcea6 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -127,10 +127,25 @@
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200-fec";
- reg = <3000 800>;
+ reg = <3000 400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <3000 400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ interrupt-parent = <&mpc5200_pic>;
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ };
};
ata@3a00 {
@@ -141,11 +156,19 @@
};
i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
+
+ rtc@68 {
+ device_type = "rtc";
+ compatible = "dallas,ds1307";
+ reg = <68>;
+ };
};
sram@8000 {
@@ -154,6 +177,23 @@
};
};
+ lpb {
+ model = "fsl,lpb";
+ compatible = "fsl,lpb";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 fc000000 02000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 02000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
+ };
+
pci@f0000d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/mpc832x_mds_defconfig
index 79d228f..50cceda 100644
--- a/arch/powerpc/configs/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:16 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:51 2008
#
# CONFIG_PPC64 is not set
@@ -628,8 +628,7 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -824,10 +823,6 @@
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig
index 9360144..b4e82c0 100644
--- a/arch/powerpc/configs/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:20 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:56 2008
#
# CONFIG_PPC64 is not set
@@ -571,8 +571,7 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -767,10 +766,6 @@
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/mpc836x_mds_defconfig
index 7c8b060..d50a96e 100644
--- a/arch/powerpc/configs/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:21 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:57 2008
#
# CONFIG_PPC64 is not set
@@ -626,8 +626,7 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -822,10 +821,6 @@
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/mpc837x_rdb_defconfig
index 44093a0..a633176 100644
--- a/arch/powerpc/configs/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/mpc837x_rdb_defconfig
@@ -684,7 +684,29 @@
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 1f6cf68..029d2da 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -690,7 +690,29 @@
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/mpc8544_ds_defconfig
index c75b6ae..418bcdb 100644
--- a/arch/powerpc/configs/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:26 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:03 2008
#
# CONFIG_PPC64 is not set
@@ -742,8 +742,7 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -1209,10 +1208,6 @@
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig
index e7da4b9..2b866b3 100644
--- a/arch/powerpc/configs/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:28 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:05 2008
#
# CONFIG_PPC64 is not set
@@ -629,8 +629,7 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -825,10 +824,6 @@
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8572_ds_defconfig b/arch/powerpc/configs/mpc8572_ds_defconfig
index 460afe9..53aa6f3 100644
--- a/arch/powerpc/configs/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:29 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:06 2008
#
# CONFIG_PPC64 is not set
@@ -742,8 +742,7 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -1209,10 +1208,6 @@
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 615e4c1..2075722 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:31 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:08 2008
#
# CONFIG_PPC64 is not set
@@ -750,8 +750,7 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -1217,10 +1216,6 @@
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 994e768..d01dcdb 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:34 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:11 2008
#
# CONFIG_PPC64 is not set
@@ -736,8 +736,7 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -1203,10 +1202,6 @@
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index f53d55b..f912168 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:37 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:15 2008
#
# CONFIG_PPC64 is not set
@@ -855,8 +855,7 @@
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -1129,10 +1128,6 @@
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 8fc8574..fdbfd39 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:41 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:19 2008
#
# CONFIG_PPC64 is not set
@@ -717,8 +717,7 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -931,10 +930,6 @@
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index c1baf9d..b9dbfff 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -12,7 +12,7 @@
CFLAGS_btext.o += -fPIC
endif
-obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
+obj-y := cputable.o ptrace.o syscalls.o \
irq.o align.o signal_32.o pmc.o vdso.o \
init_task.o process.o systbl.o idle.o \
signal.o
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 11b4f6d..d3aee08 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1387,12 +1387,14 @@
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
ori r4,r4,MSR_EE
+ li r8,1
+ stb r8,PACAHARDIRQEN(r13)
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
BEGIN_FW_FTR_SECTION
- stb r7,PACASOFTIRQEN(r13)
stb r7,PACAHARDIRQEN(r13)
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+ stb r7,PACASOFTIRQEN(r13)
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
@@ -1520,15 +1522,14 @@
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
mfmsr r5
- ori r5,r5,MSR_EE /* Hard Enabled */
+ ori r5,r5,MSR_EE /* Hard Enabled on iSeries*/
mtmsrd r5
+ li r5,1
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
-BEGIN_FW_FTR_SECTION
- stb r5,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+ stb r5,PACAHARDIRQEN(r13) /* Hard Disabled on others */
- bl .start_kernel
+ bl .start_kernel
/* Not reached */
BUG_OPCODE
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index b0e5deb..292163f 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -143,7 +143,6 @@
*/
if (local_paca->lppaca_ptr->int_dword.any_int)
iseries_handle_interrupts();
- return;
}
/*
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 9c98424..65d14e6 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -15,7 +15,6 @@
#include <linux/bitops.h>
#include <asm/page.h>
-#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/cacheflush.h>
#include <asm/uaccess.h>
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index f227659..538baf4 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -356,7 +356,7 @@
/* Enforce exclusive open with use count of PDE */
spin_lock(&flash_file_open_lock);
- if (atomic_read(&dp->count) > 1) {
+ if (atomic_read(&dp->count) > 2) {
spin_unlock(&flash_file_open_lock);
return -EBUSY;
}
diff --git a/arch/powerpc/kernel/semaphore.c b/arch/powerpc/kernel/semaphore.c
deleted file mode 100644
index 2f8c3c9..0000000
--- a/arch/powerpc/kernel/semaphore.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * PowerPC-specific semaphore code.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * April 2001 - Reworked by Paul Mackerras <paulus@samba.org>
- * to eliminate the SMP races in the old version between the updates
- * of `count' and `waking'. Now we use negative `count' values to
- * indicate that some process(es) are waiting for the semaphore.
- */
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/atomic.h>
-#include <asm/semaphore.h>
-#include <asm/errno.h>
-
-/*
- * Atomically update sem->count.
- * This does the equivalent of the following:
- *
- * old_count = sem->count;
- * tmp = MAX(old_count, 0) + incr;
- * sem->count = tmp;
- * return old_count;
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
- int old_count, tmp;
-
- __asm__ __volatile__("\n"
-"1: lwarx %0,0,%3\n"
-" srawi %1,%0,31\n"
-" andc %1,%0,%1\n"
-" add %1,%1,%4\n"
- PPC405_ERR77(0,%3)
-" stwcx. %1,0,%3\n"
-" bne 1b"
- : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
- : "r" (&sem->count), "r" (incr), "m" (sem->count)
- : "cc");
-
- return old_count;
-}
-
-void __up(struct semaphore *sem)
-{
- /*
- * Note that we incremented count in up() before we came here,
- * but that was ineffective since the result was <= 0, and
- * any negative value of count is equivalent to 0.
- * This ends up setting count to 1, unless count is now > 0
- * (i.e. because some other cpu has called up() in the meantime),
- * in which case we just increment count.
- */
- __sem_update_count(sem, 1);
- wake_up(&sem->wait);
-}
-EXPORT_SYMBOL(__up);
-
-/*
- * Note that when we come in to __down or __down_interruptible,
- * we have already decremented count, but that decrement was
- * ineffective since the result was < 0, and any negative value
- * of count is equivalent to 0.
- * Thus it is only when we decrement count from some value > 0
- * that we have actually got the semaphore.
- */
-void __sched __down(struct semaphore *sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
- __set_task_state(tsk, TASK_UNINTERRUPTIBLE);
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- /*
- * Try to get the semaphore. If the count is > 0, then we've
- * got the semaphore; we decrement count and exit the loop.
- * If the count is 0 or negative, we set it to -1, indicating
- * that we are asleep, and then sleep.
- */
- while (__sem_update_count(sem, -1) <= 0) {
- schedule();
- set_task_state(tsk, TASK_UNINTERRUPTIBLE);
- }
- remove_wait_queue(&sem->wait, &wait);
- __set_task_state(tsk, TASK_RUNNING);
-
- /*
- * If there are any more sleepers, wake one of them up so
- * that it can either get the semaphore, or set count to -1
- * indicating that there are still processes sleeping.
- */
- wake_up(&sem->wait);
-}
-EXPORT_SYMBOL(__down);
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
- __set_task_state(tsk, TASK_INTERRUPTIBLE);
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- while (__sem_update_count(sem, -1) <= 0) {
- if (signal_pending(current)) {
- /*
- * A signal is pending - give up trying.
- * Set sem->count to 0 if it is negative,
- * since we are no longer sleeping.
- */
- __sem_update_count(sem, 0);
- retval = -EINTR;
- break;
- }
- schedule();
- set_task_state(tsk, TASK_INTERRUPTIBLE);
- }
- remove_wait_queue(&sem->wait, &wait);
- __set_task_state(tsk, TASK_RUNNING);
-
- wake_up(&sem->wait);
- return retval;
-}
-EXPORT_SYMBOL(__down_interruptible);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index cd870a8..06d918d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -10,9 +10,6 @@
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
-#if defined(CONFIG_IDE) || defined(CONFIG_IDE_MODULE)
-#include <linux/ide.h>
-#endif
#include <linux/tty.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
@@ -51,11 +48,6 @@
extern void bootx_init(unsigned long r4, unsigned long phys);
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-struct ide_machdep_calls ppc_ide_md;
-EXPORT_SYMBOL(ppc_ide_md);
-#endif
-
int boot_cpuid;
EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 7f830a4..e10d76a 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -44,6 +44,9 @@
#ifdef CONFIG_SMP
.text
_GLOBAL(hash_page_sync)
+ mfmsr r10
+ rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
+ mtmsr r0
lis r8,mmu_hash_lock@h
ori r8,r8,mmu_hash_lock@l
lis r0,0x0fff
@@ -60,8 +63,9 @@
eieio
li r0,0
stw r0,0(r8)
- blr
-#endif
+ mtmsr r10
+ blr
+#endif /* CONFIG_SMP */
/*
* Load a PTE into the hash table, if possible.
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 1c58db9..bcf50d7 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1144,28 +1144,6 @@
{
struct device_node* nd;
-#ifdef CONFIG_BLK_DEV_IDE
- struct pci_dev *dev = NULL;
-
- /* OF fails to initialize IDE controllers on macs
- * (and maybe other machines)
- *
- * Ideally, this should be moved to the IDE layer, but we need
- * to check specifically with Andre Hedrick how to do it cleanly
- * since the common IDE code seem to care about the fact that the
- * BIOS may have disabled a controller.
- *
- * -- BenH
- */
- for_each_pci_dev(dev) {
- if ((dev->class >> 16) != PCI_BASE_CLASS_STORAGE)
- continue;
- if (pci_enable_device(dev))
- printk(KERN_WARNING
- "pci: Failed to enable %s\n", pci_name(dev));
- }
-#endif /* CONFIG_BLK_DEV_IDE */
-
for_each_node_by_name(nd, "firewire") {
if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") ||
of_device_is_compatible(nd, "pci106b,30") ||
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index b3abaaf..3362e78 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -2,7 +2,6 @@
#define __PMAC_H__
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/irq.h>
/*
@@ -35,10 +34,6 @@
extern void pmac_setup_smp(void);
-extern unsigned long pmac_ide_get_base(int index);
-extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
- unsigned long data_port, unsigned long ctrl_port, int *irq);
-
extern int pmac_nvram_init(void);
extern void pmac_pic_init(void);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 36ff1b6..2693fc3 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -574,14 +574,6 @@
ISA_DMA_THRESHOLD = ~0L;
DMA_MODE_READ = 1;
DMA_MODE_WRITE = 2;
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
- ppc_ide_md.default_io_base = pmac_ide_get_base;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
-
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PMAC_SMU
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 7be7112..dd066bb 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -240,6 +240,7 @@
case CPM_CLK_SCC1:
reg = &im_cpmux->cmx_scr;
shift = 24;
+ break;
case CPM_CLK_SCC2:
reg = &im_cpmux->cmx_scr;
shift = 16;
diff --git a/arch/ppc/configs/sandpoint_defconfig b/arch/ppc/configs/sandpoint_defconfig
index fb493a6..9525e341 100644
--- a/arch/ppc/configs/sandpoint_defconfig
+++ b/arch/ppc/configs/sandpoint_defconfig
@@ -189,7 +189,7 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SL82C105=y
# CONFIG_BLK_DEV_IDEPCI is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index c353502..2ba659f 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -12,7 +12,6 @@
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/pm.h>
#include <linux/bitops.h>
@@ -124,10 +123,6 @@
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(ioremap_bot); /* aka VMALLOC_END */
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-EXPORT_SYMBOL(ppc_ide_md);
-#endif
-
#ifdef CONFIG_PCI
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(isa_mem_base);
diff --git a/arch/ppc/kernel/semaphore.c b/arch/ppc/kernel/semaphore.c
deleted file mode 100644
index 2fe429b..0000000
--- a/arch/ppc/kernel/semaphore.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * PowerPC-specific semaphore code.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * April 2001 - Reworked by Paul Mackerras <paulus@samba.org>
- * to eliminate the SMP races in the old version between the updates
- * of `count' and `waking'. Now we use negative `count' values to
- * indicate that some process(es) are waiting for the semaphore.
- */
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/atomic.h>
-#include <asm/semaphore.h>
-#include <asm/errno.h>
-
-/*
- * Atomically update sem->count.
- * This does the equivalent of the following:
- *
- * old_count = sem->count;
- * tmp = MAX(old_count, 0) + incr;
- * sem->count = tmp;
- * return old_count;
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
- int old_count, tmp;
-
- __asm__ __volatile__("\n"
-"1: lwarx %0,0,%3\n"
-" srawi %1,%0,31\n"
-" andc %1,%0,%1\n"
-" add %1,%1,%4\n"
- PPC405_ERR77(0,%3)
-" stwcx. %1,0,%3\n"
-" bne 1b"
- : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
- : "r" (&sem->count), "r" (incr), "m" (sem->count)
- : "cc");
-
- return old_count;
-}
-
-void __up(struct semaphore *sem)
-{
- /*
- * Note that we incremented count in up() before we came here,
- * but that was ineffective since the result was <= 0, and
- * any negative value of count is equivalent to 0.
- * This ends up setting count to 1, unless count is now > 0
- * (i.e. because some other cpu has called up() in the meantime),
- * in which case we just increment count.
- */
- __sem_update_count(sem, 1);
- wake_up(&sem->wait);
-}
-
-/*
- * Note that when we come in to __down or __down_interruptible,
- * we have already decremented count, but that decrement was
- * ineffective since the result was < 0, and any negative value
- * of count is equivalent to 0.
- * Thus it is only when we decrement count from some value > 0
- * that we have actually got the semaphore.
- */
-void __sched __down(struct semaphore *sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
- tsk->state = TASK_UNINTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
- smp_wmb();
-
- /*
- * Try to get the semaphore. If the count is > 0, then we've
- * got the semaphore; we decrement count and exit the loop.
- * If the count is 0 or negative, we set it to -1, indicating
- * that we are asleep, and then sleep.
- */
- while (__sem_update_count(sem, -1) <= 0) {
- schedule();
- tsk->state = TASK_UNINTERRUPTIBLE;
- }
- remove_wait_queue(&sem->wait, &wait);
- tsk->state = TASK_RUNNING;
-
- /*
- * If there are any more sleepers, wake one of them up so
- * that it can either get the semaphore, or set count to -1
- * indicating that there are still processes sleeping.
- */
- wake_up(&sem->wait);
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
- tsk->state = TASK_INTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
- smp_wmb();
-
- while (__sem_update_count(sem, -1) <= 0) {
- if (signal_pending(current)) {
- /*
- * A signal is pending - give up trying.
- * Set sem->count to 0 if it is negative,
- * since we are no longer sleeping.
- */
- __sem_update_count(sem, 0);
- retval = -EINTR;
- break;
- }
- schedule();
- tsk->state = TASK_INTERRUPTIBLE;
- }
- tsk->state = TASK_RUNNING;
- remove_wait_queue(&sem->wait, &wait);
- wake_up(&sem->wait);
- return retval;
-}
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 2940559..bfddfde 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -10,7 +10,6 @@
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
-#include <linux/ide.h>
#include <linux/screen_info.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
@@ -57,7 +56,6 @@
extern void power4_idle(void);
extern boot_infos_t *boot_infos;
-struct ide_machdep_calls ppc_ide_md;
/* Used with the BI_MEMSIZE bootinfo parameter to store the memory
size value reported by the boot loader. */
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
index 017623c..01f20f4 100644
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -22,7 +22,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
index 453643a..8027a36 100644
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -25,7 +25,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
index b79ebb8..f6d8c2e 100644
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -23,7 +23,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index 28a712c..308386e 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -23,7 +23,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
index f6a0c66..1156942 100644
--- a/arch/ppc/platforms/4xx/taishan.c
+++ b/arch/ppc/platforms/4xx/taishan.c
@@ -23,7 +23,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
index 66a44ff..f6cfd44 100644
--- a/arch/ppc/platforms/4xx/yucca.c
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -24,7 +24,6 @@
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c
index dcd6070..27c140f 100644
--- a/arch/ppc/platforms/chestnut.c
+++ b/arch/ppc/platforms/chestnut.c
@@ -22,7 +22,6 @@
#include <linux/initrd.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/ide.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c
index e78bccf..07f672d 100644
--- a/arch/ppc/platforms/cpci690.c
+++ b/arch/ppc/platforms/cpci690.c
@@ -10,7 +10,6 @@
*/
#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/irq.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c
index c1f77e1..f522b31 100644
--- a/arch/ppc/platforms/ev64260.c
+++ b/arch/ppc/platforms/ev64260.c
@@ -23,7 +23,6 @@
#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/irq.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
index ca5de13..904b518 100644
--- a/arch/ppc/platforms/hdpu.c
+++ b/arch/ppc/platforms/hdpu.c
@@ -16,7 +16,6 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/irq.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/platform_device.h>
@@ -604,41 +603,6 @@
}
}
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-static void
-hdpu_ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
-{
- request_region(from, extent, name);
- return;
-}
-
-static void hdpu_ide_release_region(ide_ioreg_t from, unsigned int extent)
-{
- release_region(from, extent);
- return;
-}
-
-static void __init
-hdpu_ide_pci_init_hwif_ports(hw_regs_t * hw, ide_ioreg_t data_port,
- ide_ioreg_t ctrl_port, int *irq)
-{
- struct pci_dev *dev;
-
- pci_for_each_dev(dev) {
- if (((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) ||
- ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)) {
- hw->irq = dev->irq;
-
- if (irq != NULL) {
- *irq = dev->irq;
- }
- }
- }
-
- return;
-}
-#endif
-
void hdpu_heartbeat(void)
{
if (mv64x60_read(&bh, MV64x60_GPP_VALUE) & (1 << 5))
diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c
index b947c77..1e3aa6e 100644
--- a/arch/ppc/platforms/lopec.c
+++ b/arch/ppc/platforms/lopec.c
@@ -15,7 +15,6 @@
#include <linux/pci_ids.h>
#include <linux/ioport.h>
#include <linux/init.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/initrd.h>
#include <linux/console.h>
@@ -168,85 +167,6 @@
lopec_halt();
}
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-int lopec_ide_ports_known = 0;
-static unsigned long lopec_ide_regbase[MAX_HWIFS];
-static unsigned long lopec_ide_ctl_regbase[MAX_HWIFS];
-static unsigned long lopec_idedma_regbase;
-
-static void
-lopec_ide_probe(void)
-{
- struct pci_dev *dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
- PCI_DEVICE_ID_WINBOND_82C105,
- NULL);
- lopec_ide_ports_known = 1;
-
- if (dev) {
- lopec_ide_regbase[0] = dev->resource[0].start;
- lopec_ide_regbase[1] = dev->resource[2].start;
- lopec_ide_ctl_regbase[0] = dev->resource[1].start;
- lopec_ide_ctl_regbase[1] = dev->resource[3].start;
- lopec_idedma_regbase = dev->resource[4].start;
- pci_dev_put(dev);
- }
-}
-
-static int
-lopec_ide_default_irq(unsigned long base)
-{
- if (lopec_ide_ports_known == 0)
- lopec_ide_probe();
-
- if (base == lopec_ide_regbase[0])
- return 14;
- else if (base == lopec_ide_regbase[1])
- return 15;
- else
- return 0;
-}
-
-static unsigned long
-lopec_ide_default_io_base(int index)
-{
- if (lopec_ide_ports_known == 0)
- lopec_ide_probe();
- return lopec_ide_regbase[index];
-}
-
-static void __init
-lopec_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data,
- unsigned long ctl, int *irq)
-{
- unsigned long reg = data;
- uint alt_status_base;
- int i;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
- hw->io_ports[i] = reg++;
-
- if (data == lopec_ide_regbase[0]) {
- alt_status_base = lopec_ide_ctl_regbase[0] + 2;
- hw->irq = 14;
- } else if (data == lopec_ide_regbase[1]) {
- alt_status_base = lopec_ide_ctl_regbase[1] + 2;
- hw->irq = 15;
- } else {
- alt_status_base = 0;
- hw->irq = 0;
- }
-
- if (ctl)
- hw->io_ports[IDE_CONTROL_OFFSET] = ctl;
- else
- hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
-
- if (irq != NULL)
- *irq = hw->irq;
-
-}
-#endif /* BLK_DEV_IDE */
-
static void __init
lopec_init_IRQ(void)
{
@@ -384,11 +304,6 @@
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = lopec_ide_default_irq;
- ppc_ide_md.default_io_base = lopec_ide_default_io_base;
- ppc_ide_md.ide_init_hwif = lopec_ide_init_hwif_ports;
-#endif
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c
index bb8d4a4..053b54a 100644
--- a/arch/ppc/platforms/mvme5100.c
+++ b/arch/ppc/platforms/mvme5100.c
@@ -17,7 +17,6 @@
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/kdev_t.h>
#include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c
index 4d46650..162dc85 100644
--- a/arch/ppc/platforms/powerpmc250.c
+++ b/arch/ppc/platforms/powerpmc250.c
@@ -25,7 +25,6 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
-#include <linux/ide.h>
#include <linux/root_dev.h>
#include <asm/byteorder.h>
diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c
index 8a1788c..cbcac85 100644
--- a/arch/ppc/platforms/pplus.c
+++ b/arch/ppc/platforms/pplus.c
@@ -19,7 +19,6 @@
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
@@ -668,57 +667,6 @@
ppc_md.progress("init_irq: exit", 0);
}
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE stuff.
- */
-static int pplus_ide_default_irq(unsigned long base)
-{
- switch (base) {
- case 0x1f0:
- return 14;
- case 0x170:
- return 15;
- default:
- return 0;
- }
-}
-
-static unsigned long pplus_ide_default_io_base(int index)
-{
- switch (index) {
- case 0:
- return 0x1f0;
- case 1:
- return 0x170;
- default:
- return 0;
- }
-}
-
-static void __init
-pplus_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
- unsigned long ctrl_port, int *irq)
-{
- unsigned long reg = data_port;
- int i;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
- hw->io_ports[i] = reg;
- reg += 1;
- }
-
- if (ctrl_port)
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
- else
- hw->io_ports[IDE_CONTROL_OFFSET] =
- hw->io_ports[IDE_DATA_OFFSET] + 0x206;
-
- if (irq != NULL)
- *irq = pplus_ide_default_irq(data_port);
-}
-#endif
-
#ifdef CONFIG_SMP
/* PowerPlus (MTX) support */
static int __init smp_pplus_probe(void)
@@ -884,12 +832,6 @@
ppc_md.find_end_of_memory = pplus_find_end_of_memory;
ppc_md.setup_io_mappings = pplus_map_io;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = pplus_ide_default_irq;
- ppc_ide_md.default_io_base = pplus_ide_default_io_base;
- ppc_ide_md.ide_init_hwif = pplus_ide_init_hwif_ports;
-#endif
-
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
index 3844985..465b658 100644
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -33,7 +33,6 @@
#include <linux/console.h>
#include <linux/timex.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
@@ -894,38 +893,6 @@
i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0);
}
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE stuff.
- */
-static int
-prep_ide_default_irq(unsigned long base)
-{
- switch (base) {
- case 0x1f0: return 13;
- case 0x170: return 13;
- case 0x1e8: return 11;
- case 0x168: return 10;
- case 0xfff0: return 14; /* MCP(N)750 ide0 */
- case 0xffe0: return 15; /* MCP(N)750 ide1 */
- default: return 0;
- }
-}
-
-static unsigned long
-prep_ide_default_io_base(int index)
-{
- switch (index) {
- case 0: return 0x1f0;
- case 1: return 0x170;
- case 2: return 0x1e8;
- case 3: return 0x168;
- default:
- return 0;
- }
-}
-#endif
-
#ifdef CONFIG_SMP
/* PReP (MTX) support */
static int __init
@@ -1070,11 +1037,6 @@
ppc_md.setup_io_mappings = prep_map_io;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = prep_ide_default_irq;
- ppc_ide_md.default_io_base = prep_ide_default_io_base;
-#endif
-
#ifdef CONFIG_SMP
smp_ops = &prep_smp_ops;
#endif /* CONFIG_SMP */
diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c
index fcab513..93bd593 100644
--- a/arch/ppc/platforms/prpmc750.c
+++ b/arch/ppc/platforms/prpmc750.c
@@ -22,7 +22,6 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/ide.h>
#include <linux/root_dev.h>
#include <linux/slab.h>
#include <linux/serial_reg.h>
diff --git a/arch/ppc/platforms/prpmc800.c b/arch/ppc/platforms/prpmc800.c
index f4ade5c..5bcda7f 100644
--- a/arch/ppc/platforms/prpmc800.c
+++ b/arch/ppc/platforms/prpmc800.c
@@ -20,7 +20,6 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/ide.h>
#include <linux/root_dev.h>
#include <linux/harrier_defs.h>
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index 44d4398..179b4a9 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -29,7 +29,6 @@
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
index c991160..18495e7 100644
--- a/arch/ppc/platforms/residual.c
+++ b/arch/ppc/platforms/residual.c
@@ -38,7 +38,6 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/pci.h>
-#include <linux/ide.h>
#include <asm/sections.h>
#include <asm/mmu.h>
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c
index 3352fae..b4897bd 100644
--- a/arch/ppc/platforms/sandpoint.c
+++ b/arch/ppc/platforms/sandpoint.c
@@ -71,7 +71,6 @@
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
@@ -559,93 +558,6 @@
return 0;
}
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE support.
- */
-static int sandpoint_ide_ports_known = 0;
-static unsigned long sandpoint_ide_regbase[MAX_HWIFS];
-static unsigned long sandpoint_ide_ctl_regbase[MAX_HWIFS];
-static unsigned long sandpoint_idedma_regbase;
-
-static void
-sandpoint_ide_probe(void)
-{
- struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_WINBOND,
- PCI_DEVICE_ID_WINBOND_82C105, NULL);
-
- if (pdev) {
- sandpoint_ide_regbase[0]=pdev->resource[0].start;
- sandpoint_ide_regbase[1]=pdev->resource[2].start;
- sandpoint_ide_ctl_regbase[0]=pdev->resource[1].start;
- sandpoint_ide_ctl_regbase[1]=pdev->resource[3].start;
- sandpoint_idedma_regbase=pdev->resource[4].start;
- pci_dev_put(pdev);
- }
-
- sandpoint_ide_ports_known = 1;
-}
-
-static int
-sandpoint_ide_default_irq(unsigned long base)
-{
- if (sandpoint_ide_ports_known == 0)
- sandpoint_ide_probe();
-
- if (base == sandpoint_ide_regbase[0])
- return SANDPOINT_IDE_INT0;
- else if (base == sandpoint_ide_regbase[1])
- return SANDPOINT_IDE_INT1;
- else
- return 0;
-}
-
-static unsigned long
-sandpoint_ide_default_io_base(int index)
-{
- if (sandpoint_ide_ports_known == 0)
- sandpoint_ide_probe();
-
- return sandpoint_ide_regbase[index];
-}
-
-static void __init
-sandpoint_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
- unsigned long ctrl_port, int *irq)
-{
- unsigned long reg = data_port;
- uint alt_status_base;
- int i;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
- hw->io_ports[i] = reg++;
- }
-
- if (data_port == sandpoint_ide_regbase[0]) {
- alt_status_base = sandpoint_ide_ctl_regbase[0] + 2;
- hw->irq = 14;
- }
- else if (data_port == sandpoint_ide_regbase[1]) {
- alt_status_base = sandpoint_ide_ctl_regbase[1] + 2;
- hw->irq = 15;
- }
- else {
- alt_status_base = 0;
- hw->irq = 0;
- }
-
- if (ctrl_port) {
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
- } else {
- hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
- }
-
- if (irq != NULL) {
- *irq = hw->irq;
- }
-}
-#endif
-
/*
* Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
*/
@@ -736,10 +648,4 @@
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = sandpoint_ide_default_irq;
- ppc_ide_md.default_io_base = sandpoint_ide_default_io_base;
- ppc_ide_md.ide_init_hwif = sandpoint_ide_init_hwif_ports;
-#endif
}
diff --git a/arch/ppc/platforms/sandpoint.h b/arch/ppc/platforms/sandpoint.h
index 3b64e64..ed83759 100644
--- a/arch/ppc/platforms/sandpoint.h
+++ b/arch/ppc/platforms/sandpoint.h
@@ -28,9 +28,6 @@
*/
#define SANDPOINT_IDE_INT0 23 /* EPIC 7 */
#define SANDPOINT_IDE_INT1 24 /* EPIC 8 */
-#else
-#define SANDPOINT_IDE_INT0 14 /* 8259 Test */
-#define SANDPOINT_IDE_INT1 15 /* 8259 Test */
#endif
/*
diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
index f4de50b..a344134 100644
--- a/arch/ppc/platforms/spruce.c
+++ b/arch/ppc/platforms/spruce.c
@@ -22,7 +22,6 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/ide.h>
#include <linux/root_dev.h>
#include <linux/serial.h>
#include <linux/tty.h>
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index 9caf850..19749e9 100644
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -87,8 +87,6 @@
unsigned char __res[sizeof(bd_t)];
-extern void m8xx_ide_init(void);
-
extern unsigned long find_available_memory(void);
extern void m8xx_cpm_reset(void);
extern void m8xx_wdt_handler_install(bd_t *bp);
@@ -474,8 +472,4 @@
ppc_md.find_end_of_memory = m8xx_find_end_of_memory;
ppc_md.setup_io_mappings = m8xx_map_io;
-
-#if defined(CONFIG_BLK_DEV_MPC8xx_IDE)
- m8xx_ide_init();
-#endif
}
diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c
index debe14c..353d746 100644
--- a/arch/ppc/syslib/ppc4xx_setup.c
+++ b/arch/ppc/syslib/ppc4xx_setup.c
@@ -24,7 +24,6 @@
#include <linux/pci.h>
#include <linux/rtc.h>
#include <linux/console.h>
-#include <linux/ide.h>
#include <linux/serial_reg.h>
#include <linux/seq_file.h>
@@ -189,24 +188,6 @@
mtspr(SPRN_PIT, tb_ticks_per_jiffy);
}
-/*
- * IDE stuff.
- * should be generic for every IDE PCI chipset
- */
-#if defined(CONFIG_PCI) && defined(CONFIG_IDE)
-static void
-ppc4xx_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
- unsigned long ctrl_port, int *irq)
-{
- int i;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; ++i)
- hw->io_ports[i] = data_port + i - IDE_DATA_OFFSET;
-
- hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
-
TODC_ALLOC();
/*
@@ -271,10 +252,6 @@
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
-
-#if defined(CONFIG_PCI) && defined(CONFIG_IDE)
- ppc_ide_md.ide_init_hwif = ppc4xx_ide_init_hwif_ports;
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
}
/* Called from machine_check_exception */
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 1831833..f6a68e1 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -3,6 +3,10 @@
# see Documentation/kbuild/kconfig-language.txt.
#
+config SCHED_MC
+ def_bool y
+ depends on SMP
+
config MMU
def_bool y
@@ -39,6 +43,9 @@
config GENERIC_TIME
def_bool y
+config GENERIC_CLOCKEVENTS
+ def_bool y
+
config GENERIC_BUG
bool
depends on BUG
@@ -69,6 +76,8 @@
comment "Processor type and features"
+source "kernel/time/Kconfig"
+
config 64BIT
bool "64 bit kernel"
help
@@ -301,10 +310,7 @@
tristate "QDIO support"
---help---
This driver provides the Queued Direct I/O base support for
- IBM mainframes.
-
- For details please refer to the documentation provided by IBM at
- <http://www10.software.ibm.com/developerworks/opensource/linux390>
+ IBM System z.
To compile this driver as a module, choose M here: the
module will be called qdio.
@@ -486,25 +492,6 @@
source kernel/Kconfig.hz
-config NO_IDLE_HZ
- bool "No HZ timer ticks in idle"
- help
- Switches the regular HZ timer off when the system is going idle.
- This helps z/VM to detect that the Linux system is idle. VM can
- then "swap-out" this guest which reduces memory usage. It also
- reduces the overhead of idle systems.
-
- The HZ timer can be switched on/off via /proc/sys/kernel/hz_timer.
- hz_timer=0 means HZ timer is disabled. hz_timer=1 means HZ
- timer is active.
-
-config NO_IDLE_HZ_INIT
- bool "HZ timer in idle off by default"
- depends on NO_IDLE_HZ
- help
- The HZ timer is switched off in idle by default. That means the
- HZ timer is already disabled at boot time.
-
config S390_HYPFS_FS
bool "s390 hypervisor file system support"
select SYS_HYPERVISOR
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index a3f67f8..e33f32b 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -499,7 +499,7 @@
}
};
-static int __init aes_init(void)
+static int __init aes_s390_init(void)
{
int ret;
@@ -542,15 +542,15 @@
goto out;
}
-static void __exit aes_fini(void)
+static void __exit aes_s390_fini(void)
{
crypto_unregister_alg(&cbc_aes_alg);
crypto_unregister_alg(&ecb_aes_alg);
crypto_unregister_alg(&aes_alg);
}
-module_init(aes_init);
-module_exit(aes_fini);
+module_init(aes_s390_init);
+module_exit(aes_s390_fini);
MODULE_ALIAS("aes");
diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index ea22707..4aba83b 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -550,7 +550,7 @@
}
};
-static int init(void)
+static int des_s390_init(void)
{
int ret = 0;
@@ -612,7 +612,7 @@
goto out;
}
-static void __exit fini(void)
+static void __exit des_s390_fini(void)
{
crypto_unregister_alg(&cbc_des3_192_alg);
crypto_unregister_alg(&ecb_des3_192_alg);
@@ -625,8 +625,8 @@
crypto_unregister_alg(&des_alg);
}
-module_init(init);
-module_exit(fini);
+module_init(des_s390_init);
+module_exit(des_s390_fini);
MODULE_ALIAS("des");
MODULE_ALIAS("des3_ede");
diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index 5a834f6..9cf9eca 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -137,7 +137,7 @@
.dia_final = sha1_final } }
};
-static int __init init(void)
+static int __init sha1_s390_init(void)
{
if (!crypt_s390_func_available(KIMD_SHA_1))
return -EOPNOTSUPP;
@@ -145,13 +145,13 @@
return crypto_register_alg(&alg);
}
-static void __exit fini(void)
+static void __exit sha1_s390_fini(void)
{
crypto_unregister_alg(&alg);
}
-module_init(init);
-module_exit(fini);
+module_init(sha1_s390_init);
+module_exit(sha1_s390_fini);
MODULE_ALIAS("sha1");
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index ccf8633..2a3d756 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -133,7 +133,7 @@
.dia_final = sha256_final } }
};
-static int init(void)
+static int sha256_s390_init(void)
{
if (!crypt_s390_func_available(KIMD_SHA_256))
return -EOPNOTSUPP;
@@ -141,13 +141,13 @@
return crypto_register_alg(&alg);
}
-static void __exit fini(void)
+static void __exit sha256_s390_fini(void)
{
crypto_unregister_alg(&alg);
}
-module_init(init);
-module_exit(fini);
+module_init(sha256_s390_init);
+module_exit(sha256_s390_fini);
MODULE_ALIAS("sha256");
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 62f6b5a..dcc3ec2 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -3,6 +3,7 @@
# Linux kernel version: 2.6.25-rc4
# Wed Mar 5 11:22:59 2008
#
+CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_LOCKDEP_SUPPORT=y
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 4d3e383..77051cd 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -11,7 +11,7 @@
obj-y := bitmap.o traps.o time.o process.o base.o early.o \
setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
- semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o diag.o
+ s390_ext.o debug.o irq.o ipl.o dis.o diag.o
obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o)
obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
@@ -19,7 +19,7 @@
extra-y += head.o init_task.o vmlinux.lds
obj-$(CONFIG_MODULES) += s390_ksyms.o module.o
-obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_SMP) += smp.o topology.o
obj-$(CONFIG_AUDIT) += audit.o
compat-obj-$(CONFIG_AUDIT) += compat_audit.o
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index e89f8c0..20723a0 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -162,4 +162,77 @@
compat_sigset_t uc_sigmask; /* mask last for extensibility */
};
+struct __sysctl_args32;
+struct stat64_emu31;
+struct mmap_arg_struct_emu31;
+struct fadvise64_64_args;
+struct old_sigaction32;
+struct old_sigaction32;
+
+long sys32_chown16(const char __user * filename, u16 user, u16 group);
+long sys32_lchown16(const char __user * filename, u16 user, u16 group);
+long sys32_fchown16(unsigned int fd, u16 user, u16 group);
+long sys32_setregid16(u16 rgid, u16 egid);
+long sys32_setgid16(u16 gid);
+long sys32_setreuid16(u16 ruid, u16 euid);
+long sys32_setuid16(u16 uid);
+long sys32_setresuid16(u16 ruid, u16 euid, u16 suid);
+long sys32_getresuid16(u16 __user *ruid, u16 __user *euid, u16 __user *suid);
+long sys32_setresgid16(u16 rgid, u16 egid, u16 sgid);
+long sys32_getresgid16(u16 __user *rgid, u16 __user *egid, u16 __user *sgid);
+long sys32_setfsuid16(u16 uid);
+long sys32_setfsgid16(u16 gid);
+long sys32_getgroups16(int gidsetsize, u16 __user *grouplist);
+long sys32_setgroups16(int gidsetsize, u16 __user *grouplist);
+long sys32_getuid16(void);
+long sys32_geteuid16(void);
+long sys32_getgid16(void);
+long sys32_getegid16(void);
+long sys32_ipc(u32 call, int first, int second, int third, u32 ptr);
+long sys32_truncate64(const char __user * path, unsigned long high,
+ unsigned long low);
+long sys32_ftruncate64(unsigned int fd, unsigned long high, unsigned long low);
+long sys32_sched_rr_get_interval(compat_pid_t pid,
+ struct compat_timespec __user *interval);
+long sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
+ compat_sigset_t __user *oset, size_t sigsetsize);
+long sys32_rt_sigpending(compat_sigset_t __user *set, size_t sigsetsize);
+long sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo);
+long sys32_execve(void);
+long sys32_init_module(void __user *umod, unsigned long len,
+ const char __user *uargs);
+long sys32_delete_module(const char __user *name_user, unsigned int flags);
+long sys32_gettimeofday(struct compat_timeval __user *tv,
+ struct timezone __user *tz);
+long sys32_settimeofday(struct compat_timeval __user *tv,
+ struct timezone __user *tz);
+long sys32_pause(void);
+long sys32_pread64(unsigned int fd, char __user *ubuf, size_t count,
+ u32 poshi, u32 poslo);
+long sys32_pwrite64(unsigned int fd, const char __user *ubuf,
+ size_t count, u32 poshi, u32 poslo);
+compat_ssize_t sys32_readahead(int fd, u32 offhi, u32 offlo, s32 count);
+long sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
+ size_t count);
+long sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *offset,
+ s32 count);
+long sys32_sysctl(struct __sysctl_args32 __user *args);
+long sys32_stat64(char __user * filename, struct stat64_emu31 __user * statbuf);
+long sys32_lstat64(char __user * filename,
+ struct stat64_emu31 __user * statbuf);
+long sys32_fstat64(unsigned long fd, struct stat64_emu31 __user * statbuf);
+long sys32_fstatat64(unsigned int dfd, char __user *filename,
+ struct stat64_emu31 __user* statbuf, int flag);
+unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg);
+long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg);
+long sys32_read(unsigned int fd, char __user * buf, size_t count);
+long sys32_write(unsigned int fd, char __user * buf, size_t count);
+long sys32_clone(void);
+long sys32_fadvise64(int fd, loff_t offset, size_t len, int advise);
+long sys32_fadvise64_64(struct fadvise64_64_args __user *args);
+long sys32_sigaction(int sig, const struct old_sigaction32 __user *act,
+ struct old_sigaction32 __user *oact);
+long sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
+ struct sigaction32 __user *oact, size_t sigsetsize);
+long sys32_sigaltstack(const stack_t32 __user *uss, stack_t32 __user *uoss);
#endif /* _ASM_S390X_S390_H */
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index a5692c4..c7f02e7 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -29,6 +29,7 @@
#include <asm/lowcore.h>
#include "compat_linux.h"
#include "compat_ptrace.h"
+#include "entry.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
@@ -428,6 +429,10 @@
/* Default to using normal stack */
sp = (unsigned long) A(regs->gprs[15]);
+ /* Overflow on alternate signal stack gives SIGSEGV. */
+ if (on_sig_stack(sp) && !on_sig_stack((sp - frame_size) & -8UL))
+ return (void __user *) -1UL;
+
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (! sas_ss_flags(sp))
@@ -461,6 +466,9 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof(sigframe32)))
goto give_sigsegv;
+ if (frame == (void __user *) -1UL)
+ goto give_sigsegv;
+
if (__copy_to_user(&frame->sc.oldmask, &set->sig, _SIGMASK_COPY_SIZE32))
goto give_sigsegv;
@@ -514,6 +522,9 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof(rt_sigframe32)))
goto give_sigsegv;
+ if (frame == (void __user *) -1UL)
+ goto give_sigsegv;
+
if (copy_siginfo_to_user32(&frame->info, info))
goto give_sigsegv;
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 1b2f5ce..1e7d4ac 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -73,7 +73,7 @@
static int debug_open(struct inode *inode, struct file *file);
static int debug_close(struct inode *inode, struct file *file);
static debug_info_t* debug_info_create(char *name, int pages_per_area,
- int nr_areas, int buf_size);
+ int nr_areas, int buf_size, mode_t mode);
static void debug_info_get(debug_info_t *);
static void debug_info_put(debug_info_t *);
static int debug_prolog_level_fn(debug_info_t * id,
@@ -157,7 +157,7 @@
};
/* used by dump analysis tools to determine version of debug feature */
-unsigned int debug_feature_version = __DEBUG_FEATURE_VERSION;
+static unsigned int __used debug_feature_version = __DEBUG_FEATURE_VERSION;
/* static globals */
@@ -327,7 +327,8 @@
*/
static debug_info_t*
-debug_info_create(char *name, int pages_per_area, int nr_areas, int buf_size)
+debug_info_create(char *name, int pages_per_area, int nr_areas, int buf_size,
+ mode_t mode)
{
debug_info_t* rc;
@@ -336,6 +337,8 @@
if(!rc)
goto out;
+ rc->mode = mode & ~S_IFMT;
+
/* create root directory */
rc->debugfs_root_entry = debugfs_create_dir(rc->name,
debug_debugfs_root_entry);
@@ -676,23 +679,30 @@
}
/*
- * debug_register:
- * - creates and initializes debug area for the caller
- * - returns handle for debug area
+ * debug_register_mode:
+ * - Creates and initializes debug area for the caller
+ * The mode parameter allows to specify access rights for the s390dbf files
+ * - Returns handle for debug area
*/
-debug_info_t*
-debug_register (char *name, int pages_per_area, int nr_areas, int buf_size)
+debug_info_t *debug_register_mode(char *name, int pages_per_area, int nr_areas,
+ int buf_size, mode_t mode, uid_t uid,
+ gid_t gid)
{
debug_info_t *rc = NULL;
+ /* Since debugfs currently does not support uid/gid other than root, */
+ /* we do not allow gid/uid != 0 until we get support for that. */
+ if ((uid != 0) || (gid != 0))
+ printk(KERN_WARNING "debug: Warning - Currently only uid/gid "
+ "= 0 are supported. Using root as owner now!");
if (!initialized)
BUG();
mutex_lock(&debug_mutex);
/* create new debug_info */
- rc = debug_info_create(name, pages_per_area, nr_areas, buf_size);
+ rc = debug_info_create(name, pages_per_area, nr_areas, buf_size, mode);
if(!rc)
goto out;
debug_register_view(rc, &debug_level_view);
@@ -705,6 +715,20 @@
mutex_unlock(&debug_mutex);
return rc;
}
+EXPORT_SYMBOL(debug_register_mode);
+
+/*
+ * debug_register:
+ * - creates and initializes debug area for the caller
+ * - returns handle for debug area
+ */
+
+debug_info_t *debug_register(char *name, int pages_per_area, int nr_areas,
+ int buf_size)
+{
+ return debug_register_mode(name, pages_per_area, nr_areas, buf_size,
+ S_IRUSR | S_IWUSR, 0, 0);
+}
/*
* debug_unregister:
@@ -1073,15 +1097,16 @@
int rc = 0;
int i;
unsigned long flags;
- mode_t mode = S_IFREG;
+ mode_t mode;
struct dentry *pde;
if (!id)
goto out;
- if (view->prolog_proc || view->format_proc || view->header_proc)
- mode |= S_IRUSR;
- if (view->input_proc)
- mode |= S_IWUSR;
+ mode = (id->mode | S_IFREG) & ~S_IXUGO;
+ if (!(view->prolog_proc || view->format_proc || view->header_proc))
+ mode &= ~(S_IRUSR | S_IRGRP | S_IROTH);
+ if (!view->input_proc)
+ mode &= ~(S_IWUSR | S_IWGRP | S_IWOTH);
pde = debugfs_create_file(view->name, mode, id->debugfs_root_entry,
id , &debug_file_ops);
if (!pde){
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 01832c4..540a67f 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -21,6 +21,7 @@
#include <asm/setup.h>
#include <asm/cpcmd.h>
#include <asm/sclp.h>
+#include "entry.h"
/*
* Create a Kernel NSS if the SAVESYS= parameter is defined
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
new file mode 100644
index 0000000..6b18963
--- /dev/null
+++ b/arch/s390/kernel/entry.h
@@ -0,0 +1,60 @@
+#ifndef _ENTRY_H
+#define _ENTRY_H
+
+#include <linux/types.h>
+#include <linux/signal.h>
+#include <asm/ptrace.h>
+
+typedef void pgm_check_handler_t(struct pt_regs *, long);
+extern pgm_check_handler_t *pgm_check_table[128];
+pgm_check_handler_t do_protection_exception;
+pgm_check_handler_t do_dat_exception;
+
+extern int sysctl_userprocess_debug;
+
+void do_single_step(struct pt_regs *regs);
+void syscall_trace(struct pt_regs *regs, int entryexit);
+void kernel_stack_overflow(struct pt_regs * regs);
+void do_signal(struct pt_regs *regs);
+int handle_signal32(unsigned long sig, struct k_sigaction *ka,
+ siginfo_t *info, sigset_t *oldset, struct pt_regs *regs);
+
+void do_extint(struct pt_regs *regs, unsigned short code);
+int __cpuinit start_secondary(void *cpuvoid);
+void __init startup_init(void);
+void die(const char * str, struct pt_regs * regs, long err);
+
+struct new_utsname;
+struct mmap_arg_struct;
+struct fadvise64_64_args;
+struct old_sigaction;
+struct sel_arg_struct;
+
+long sys_pipe(unsigned long __user *fildes);
+long sys_mmap2(struct mmap_arg_struct __user *arg);
+long old_mmap(struct mmap_arg_struct __user *arg);
+long sys_ipc(uint call, int first, unsigned long second,
+ unsigned long third, void __user *ptr);
+long s390x_newuname(struct new_utsname __user *name);
+long s390x_personality(unsigned long personality);
+long s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
+ size_t len, int advice);
+long s390_fadvise64_64(struct fadvise64_64_args __user *args);
+long s390_fallocate(int fd, int mode, loff_t offset, u32 len_high, u32 len_low);
+long sys_fork(void);
+long sys_clone(void);
+long sys_vfork(void);
+void execve_tail(void);
+long sys_execve(void);
+int sys_sigsuspend(int history0, int history1, old_sigset_t mask);
+long sys_sigaction(int sig, const struct old_sigaction __user *act,
+ struct old_sigaction __user *oact);
+long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss);
+long sys_sigreturn(void);
+long sys_rt_sigreturn(void);
+long sys32_sigreturn(void);
+long sys32_rt_sigreturn(void);
+long old_select(struct sel_arg_struct __user *arg);
+long sys_ptrace(long request, long pid, long addr, long data);
+
+#endif /* _ENTRY_H */
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index efde6e1..cd959c0 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -475,6 +475,7 @@
pgm_no_vtime:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
+ mvc SP_ARGS(8,%r15),__LC_LAST_BREAK
TRACE_IRQS_OFF
lgf %r3,__LC_PGM_ILC # load program interruption code
lghi %r8,0x7f
@@ -847,6 +848,7 @@
je 0f
la %r1,__LC_SAVE_AREA+32
0: mvc SP_R12(32,%r15),0(%r1) # move %r12-%r15 to stack
+ mvc SP_ARGS(8,%r15),__LC_LAST_BREAK
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # clear back chain
la %r2,SP_PTREGS(%r15) # load pt_regs
jg kernel_stack_overflow
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 375232c..5325424 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -655,7 +655,7 @@
static struct kset *reipl_kset;
-void reipl_run(struct shutdown_trigger *trigger)
+static void reipl_run(struct shutdown_trigger *trigger)
{
struct ccw_dev_id devid;
static char buf[100];
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index c5549a2..ed04d13 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -360,7 +360,7 @@
* - When the probed function returns, this probe
* causes the handlers to fire
*/
-void kretprobe_trampoline_holder(void)
+static void __used kretprobe_trampoline_holder(void)
{
asm volatile(".global kretprobe_trampoline\n"
"kretprobe_trampoline: bcr 0,0\n");
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index ce20315..c1aff19 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -36,6 +36,8 @@
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/utsname.h>
+#include <linux/tick.h>
+#include <linux/elfcore.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@@ -44,6 +46,7 @@
#include <asm/irq.h>
#include <asm/timer.h>
#include <asm/cpu.h>
+#include "entry.h"
asmlinkage void ret_from_fork(void) asm ("ret_from_fork");
@@ -76,6 +79,7 @@
* Need to know about CPUs going idle?
*/
static ATOMIC_NOTIFIER_HEAD(idle_chain);
+DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
int register_idle_notifier(struct notifier_block *nb)
{
@@ -89,9 +93,33 @@
}
EXPORT_SYMBOL(unregister_idle_notifier);
-void do_monitor_call(struct pt_regs *regs, long interruption_code)
+static int s390_idle_enter(void)
{
-#ifdef CONFIG_SMP
+ struct s390_idle_data *idle;
+ int nr_calls = 0;
+ void *hcpu;
+ int rc;
+
+ hcpu = (void *)(long)smp_processor_id();
+ rc = __atomic_notifier_call_chain(&idle_chain, S390_CPU_IDLE, hcpu, -1,
+ &nr_calls);
+ if (rc == NOTIFY_BAD) {
+ nr_calls--;
+ __atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
+ hcpu, nr_calls, NULL);
+ return rc;
+ }
+ idle = &__get_cpu_var(s390_idle);
+ spin_lock(&idle->lock);
+ idle->idle_count++;
+ idle->in_idle = 1;
+ idle->idle_enter = get_clock();
+ spin_unlock(&idle->lock);
+ return NOTIFY_OK;
+}
+
+void s390_idle_leave(void)
+{
struct s390_idle_data *idle;
idle = &__get_cpu_var(s390_idle);
@@ -99,10 +127,6 @@
idle->idle_time += get_clock() - idle->idle_enter;
idle->in_idle = 0;
spin_unlock(&idle->lock);
-#endif
- /* disable monitor call class 0 */
- __ctl_clear_bit(8, 15);
-
atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
(void *)(long) smp_processor_id());
}
@@ -113,61 +137,30 @@
*/
static void default_idle(void)
{
- int cpu, rc;
- int nr_calls = 0;
- void *hcpu;
-#ifdef CONFIG_SMP
- struct s390_idle_data *idle;
-#endif
-
/* CPU is going idle. */
- cpu = smp_processor_id();
- hcpu = (void *)(long)cpu;
local_irq_disable();
if (need_resched()) {
local_irq_enable();
return;
}
-
- rc = __atomic_notifier_call_chain(&idle_chain, S390_CPU_IDLE, hcpu, -1,
- &nr_calls);
- if (rc == NOTIFY_BAD) {
- nr_calls--;
- __atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
- hcpu, nr_calls, NULL);
+ if (s390_idle_enter() == NOTIFY_BAD) {
local_irq_enable();
return;
}
-
- /* enable monitor call class 0 */
- __ctl_set_bit(8, 15);
-
#ifdef CONFIG_HOTPLUG_CPU
- if (cpu_is_offline(cpu)) {
+ if (cpu_is_offline(smp_processor_id())) {
preempt_enable_no_resched();
cpu_die();
}
#endif
-
local_mcck_disable();
if (test_thread_flag(TIF_MCCK_PENDING)) {
local_mcck_enable();
- /* disable monitor call class 0 */
- __ctl_clear_bit(8, 15);
- atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
- hcpu);
+ s390_idle_leave();
local_irq_enable();
s390_handle_mcck();
return;
}
-#ifdef CONFIG_SMP
- idle = &__get_cpu_var(s390_idle);
- spin_lock(&idle->lock);
- idle->idle_count++;
- idle->in_idle = 1;
- idle->idle_enter = get_clock();
- spin_unlock(&idle->lock);
-#endif
trace_hardirqs_on();
/* Wait for external, I/O or machine check interrupt. */
__load_psw_mask(psw_kernel_bits | PSW_MASK_WAIT |
@@ -177,9 +170,10 @@
void cpu_idle(void)
{
for (;;) {
+ tick_nohz_stop_sched_tick();
while (!need_resched())
default_idle();
-
+ tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
schedule();
preempt_disable();
@@ -201,6 +195,7 @@
/* Show stack backtrace if pt_regs is from kernel mode */
if (!(regs->psw.mask & PSW_MASK_PSTATE))
show_trace(NULL, (unsigned long *) regs->gprs[15]);
+ show_last_breaking_event(regs);
}
extern void kernel_thread_starter(void);
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 6e036ba..58a0642 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -41,6 +41,7 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
+#include "entry.h"
#ifdef CONFIG_COMPAT
#include "compat_ptrace.h"
diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c
index acf93db..e019b41 100644
--- a/arch/s390/kernel/s390_ext.c
+++ b/arch/s390/kernel/s390_ext.c
@@ -13,11 +13,12 @@
#include <linux/errno.h>
#include <linux/kernel_stat.h>
#include <linux/interrupt.h>
-
+#include <asm/cpu.h>
#include <asm/lowcore.h>
#include <asm/s390_ext.h>
#include <asm/irq_regs.h>
#include <asm/irq.h>
+#include "entry.h"
/*
* ext_int_hash[index] is the start of the list for all external interrupts
@@ -119,13 +120,10 @@
old_regs = set_irq_regs(regs);
irq_enter();
- asm volatile ("mc 0,0");
- if (S390_lowcore.int_clock >= S390_lowcore.jiffy_timer)
- /**
- * Make sure that the i/o interrupt did not "overtake"
- * the last HZ timer interrupt.
- */
- account_ticks(S390_lowcore.int_clock);
+ s390_idle_check();
+ if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
+ /* Serve timer interrupts first. */
+ clock_comparator_work();
kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++;
index = ext_hash(code);
for (p = ext_int_hash[index]; p; p = p->next) {
diff --git a/arch/s390/kernel/s390_ksyms.c b/arch/s390/kernel/s390_ksyms.c
index 7234c73..48238a1 100644
--- a/arch/s390/kernel/s390_ksyms.c
+++ b/arch/s390/kernel/s390_ksyms.c
@@ -27,13 +27,6 @@
EXPORT_SYMBOL(_sb_findmap);
/*
- * semaphore ops
- */
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-
-/*
* binfmt_elf loader
*/
extern int dump_fpu (struct pt_regs * regs, s390_fp_regs *fpregs);
diff --git a/arch/s390/kernel/semaphore.c b/arch/s390/kernel/semaphore.c
deleted file mode 100644
index 191303f..0000000
--- a/arch/s390/kernel/semaphore.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * linux/arch/s390/kernel/semaphore.c
- *
- * S390 version
- * Copyright (C) 1998-2000 IBM Corporation
- * Author(s): Martin Schwidefsky
- *
- * Derived from "linux/arch/i386/kernel/semaphore.c
- * Copyright (C) 1999, Linus Torvalds
- *
- */
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <asm/semaphore.h>
-
-/*
- * Atomically update sem->count. Equivalent to:
- * old_val = sem->count.counter;
- * new_val = ((old_val >= 0) ? old_val : 0) + incr;
- * sem->count.counter = new_val;
- * return old_val;
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
- int old_val, new_val;
-
- asm volatile(
- " l %0,0(%3)\n"
- "0: ltr %1,%0\n"
- " jhe 1f\n"
- " lhi %1,0\n"
- "1: ar %1,%4\n"
- " cs %0,%1,0(%3)\n"
- " jl 0b\n"
- : "=&d" (old_val), "=&d" (new_val), "=m" (sem->count)
- : "a" (&sem->count), "d" (incr), "m" (sem->count)
- : "cc");
- return old_val;
-}
-
-/*
- * The inline function up() incremented count but the result
- * was <= 0. This indicates that some process is waiting on
- * the semaphore. The semaphore is free and we'll wake the
- * first sleeping process, so we set count to 1 unless some
- * other cpu has called up in the meantime in which case
- * we just increment count by 1.
- */
-void __up(struct semaphore *sem)
-{
- __sem_update_count(sem, 1);
- wake_up(&sem->wait);
-}
-
-/*
- * The inline function down() decremented count and the result
- * was < 0. The wait loop will atomically test and update the
- * semaphore counter following the rules:
- * count > 0: decrement count, wake up queue and exit.
- * count <= 0: set count to -1, go to sleep.
- */
-void __sched __down(struct semaphore * sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
- __set_task_state(tsk, TASK_UNINTERRUPTIBLE);
- add_wait_queue_exclusive(&sem->wait, &wait);
- while (__sem_update_count(sem, -1) <= 0) {
- schedule();
- set_task_state(tsk, TASK_UNINTERRUPTIBLE);
- }
- remove_wait_queue(&sem->wait, &wait);
- __set_task_state(tsk, TASK_RUNNING);
- wake_up(&sem->wait);
-}
-
-/*
- * Same as __down() with an additional test for signals.
- * If a signal is pending the count is updated as follows:
- * count > 0: wake up queue and exit.
- * count <= 0: set count to 0, wake up queue and exit.
- */
-int __sched __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
- __set_task_state(tsk, TASK_INTERRUPTIBLE);
- add_wait_queue_exclusive(&sem->wait, &wait);
- while (__sem_update_count(sem, -1) <= 0) {
- if (signal_pending(current)) {
- __sem_update_count(sem, 0);
- retval = -EINTR;
- break;
- }
- schedule();
- set_task_state(tsk, TASK_INTERRUPTIBLE);
- }
- remove_wait_queue(&sem->wait, &wait);
- __set_task_state(tsk, TASK_RUNNING);
- wake_up(&sem->wait);
- return retval;
-}
-
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 290e504..7141147 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -39,6 +39,7 @@
#include <linux/pfn.h>
#include <linux/ctype.h>
#include <linux/reboot.h>
+#include <linux/topology.h>
#include <asm/ipl.h>
#include <asm/uaccess.h>
@@ -427,7 +428,7 @@
lc->io_new_psw.mask = psw_kernel_bits;
lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
lc->ipl_device = S390_lowcore.ipl_device;
- lc->jiffy_timer = -1LL;
+ lc->clock_comparator = -1ULL;
lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE;
lc->async_stack = (unsigned long)
__alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE;
@@ -687,7 +688,7 @@
return S390_lowcore.stfl_fac_list;
}
-static __init int stfle(unsigned long long *list, int doublewords)
+static int __init __stfle(unsigned long long *list, int doublewords)
{
typedef struct { unsigned long long _[doublewords]; } addrtype;
register unsigned long __nr asm("0") = doublewords - 1;
@@ -697,6 +698,13 @@
return __nr + 1;
}
+int __init stfle(unsigned long long *list, int doublewords)
+{
+ if (!(stfl() & (1UL << 24)))
+ return -EOPNOTSUPP;
+ return __stfle(list, doublewords);
+}
+
/*
* Setup hardware capabilities.
*/
@@ -741,7 +749,7 @@
* HWCAP_S390_DFP bit 6.
*/
if ((elf_hwcap & (1UL << 2)) &&
- stfle(&facility_list_extended, 1) > 0) {
+ __stfle(&facility_list_extended, 1) > 0) {
if (facility_list_extended & (1ULL << (64 - 43)))
elf_hwcap |= 1UL << 6;
}
@@ -823,6 +831,7 @@
cpu_init();
__cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr;
+ s390_init_cpu_topology();
/*
* Setup capabilities (ELF_HWCAP & ELF_PLATFORM).
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 4449bf3..b976820 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -27,6 +27,7 @@
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/lowcore.h>
+#include "entry.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
@@ -235,6 +236,10 @@
/* Default to using normal stack */
sp = regs->gprs[15];
+ /* Overflow on alternate signal stack gives SIGSEGV. */
+ if (on_sig_stack(sp) && !on_sig_stack((sp - frame_size) & -8UL))
+ return (void __user *) -1UL;
+
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (! sas_ss_flags(sp))
@@ -270,6 +275,9 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof(sigframe)))
goto give_sigsegv;
+ if (frame == (void __user *) -1UL)
+ goto give_sigsegv;
+
if (__copy_to_user(&frame->sc.oldmask, &set->sig, _SIGMASK_COPY_SIZE))
goto give_sigsegv;
@@ -327,6 +335,9 @@
if (!access_ok(VERIFY_WRITE, frame, sizeof(rt_sigframe)))
goto give_sigsegv;
+ if (frame == (void __user *) -1UL)
+ goto give_sigsegv;
+
if (copy_siginfo_to_user(&frame->info, info))
goto give_sigsegv;
@@ -474,11 +485,6 @@
int ret;
#ifdef CONFIG_COMPAT
if (test_thread_flag(TIF_31BIT)) {
- extern int handle_signal32(unsigned long sig,
- struct k_sigaction *ka,
- siginfo_t *info,
- sigset_t *oldset,
- struct pt_regs *regs);
ret = handle_signal32(signr, &ka, &info, oldset, regs);
}
else
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 8f894d3..0dfa988 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -44,6 +44,7 @@
#include <asm/lowcore.h>
#include <asm/sclp.h>
#include <asm/cpu.h>
+#include "entry.h"
/*
* An array with a pointer the lowcore of every CPU.
@@ -67,13 +68,12 @@
CPU_STATE_CONFIGURED,
};
-#ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_MUTEX(smp_cpu_state_mutex);
-#endif
+DEFINE_MUTEX(smp_cpu_state_mutex);
+int smp_cpu_polarization[NR_CPUS];
static int smp_cpu_state[NR_CPUS];
+static int cpu_management;
static DEFINE_PER_CPU(struct cpu, cpu_devices);
-DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
static void smp_ext_bitcall(int, ec_bit_sig);
@@ -298,7 +298,7 @@
/*
* this function sends a 'purge tlb' signal to another CPU.
*/
-void smp_ptlb_callback(void *info)
+static void smp_ptlb_callback(void *info)
{
__tlb_flush_local();
}
@@ -456,6 +456,7 @@
if (cpu_known(cpu_id))
continue;
__cpu_logical_map[logical_cpu] = cpu_id;
+ smp_cpu_polarization[logical_cpu] = POLARIZATION_UNKNWN;
if (!cpu_stopped(logical_cpu))
continue;
cpu_set(logical_cpu, cpu_present_map);
@@ -489,6 +490,7 @@
if (cpu_known(cpu_id))
continue;
__cpu_logical_map[logical_cpu] = cpu_id;
+ smp_cpu_polarization[logical_cpu] = POLARIZATION_UNKNWN;
cpu_set(logical_cpu, cpu_present_map);
if (cpu >= info->configured)
smp_cpu_state[logical_cpu] = CPU_STATE_STANDBY;
@@ -846,6 +848,7 @@
S390_lowcore.percpu_offset = __per_cpu_offset[0];
current_set[0] = current;
smp_cpu_state[0] = CPU_STATE_CONFIGURED;
+ smp_cpu_polarization[0] = POLARIZATION_UNKNWN;
spin_lock_init(&(&__get_cpu_var(s390_idle))->lock);
}
@@ -897,15 +900,19 @@
case 0:
if (smp_cpu_state[cpu] == CPU_STATE_CONFIGURED) {
rc = sclp_cpu_deconfigure(__cpu_logical_map[cpu]);
- if (!rc)
+ if (!rc) {
smp_cpu_state[cpu] = CPU_STATE_STANDBY;
+ smp_cpu_polarization[cpu] = POLARIZATION_UNKNWN;
+ }
}
break;
case 1:
if (smp_cpu_state[cpu] == CPU_STATE_STANDBY) {
rc = sclp_cpu_configure(__cpu_logical_map[cpu]);
- if (!rc)
+ if (!rc) {
smp_cpu_state[cpu] = CPU_STATE_CONFIGURED;
+ smp_cpu_polarization[cpu] = POLARIZATION_UNKNWN;
+ }
}
break;
default:
@@ -919,6 +926,34 @@
static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
#endif /* CONFIG_HOTPLUG_CPU */
+static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
+{
+ int cpu = dev->id;
+ ssize_t count;
+
+ mutex_lock(&smp_cpu_state_mutex);
+ switch (smp_cpu_polarization[cpu]) {
+ case POLARIZATION_HRZ:
+ count = sprintf(buf, "horizontal\n");
+ break;
+ case POLARIZATION_VL:
+ count = sprintf(buf, "vertical:low\n");
+ break;
+ case POLARIZATION_VM:
+ count = sprintf(buf, "vertical:medium\n");
+ break;
+ case POLARIZATION_VH:
+ count = sprintf(buf, "vertical:high\n");
+ break;
+ default:
+ count = sprintf(buf, "unknown\n");
+ break;
+ }
+ mutex_unlock(&smp_cpu_state_mutex);
+ return count;
+}
+static SYSDEV_ATTR(polarization, 0444, cpu_polarization_show, NULL);
+
static ssize_t show_cpu_address(struct sys_device *dev, char *buf)
{
return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]);
@@ -931,6 +966,7 @@
&attr_configure.attr,
#endif
&attr_address.attr,
+ &attr_polarization.attr,
NULL,
};
@@ -1075,11 +1111,48 @@
out:
put_online_cpus();
mutex_unlock(&smp_cpu_state_mutex);
+ if (!cpus_empty(newcpus))
+ topology_schedule_update();
return rc ? rc : count;
}
static SYSDEV_ATTR(rescan, 0200, NULL, rescan_store);
#endif /* CONFIG_HOTPLUG_CPU */
+static ssize_t dispatching_show(struct sys_device *dev, char *buf)
+{
+ ssize_t count;
+
+ mutex_lock(&smp_cpu_state_mutex);
+ count = sprintf(buf, "%d\n", cpu_management);
+ mutex_unlock(&smp_cpu_state_mutex);
+ return count;
+}
+
+static ssize_t dispatching_store(struct sys_device *dev, const char *buf,
+ size_t count)
+{
+ int val, rc;
+ char delim;
+
+ if (sscanf(buf, "%d %c", &val, &delim) != 1)
+ return -EINVAL;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+ rc = 0;
+ mutex_lock(&smp_cpu_state_mutex);
+ get_online_cpus();
+ if (cpu_management == val)
+ goto out;
+ rc = topology_set_cpu_management(val);
+ if (!rc)
+ cpu_management = val;
+out:
+ put_online_cpus();
+ mutex_unlock(&smp_cpu_state_mutex);
+ return rc ? rc : count;
+}
+static SYSDEV_ATTR(dispatching, 0644, dispatching_show, dispatching_store);
+
static int __init topology_init(void)
{
int cpu;
@@ -1093,6 +1166,10 @@
if (rc)
return rc;
#endif
+ rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
+ &attr_dispatching.attr);
+ if (rc)
+ return rc;
for_each_present_cpu(cpu) {
rc = smp_add_present_cpu(cpu);
if (rc)
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index fefee99..988d0d6 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -29,8 +29,8 @@
#include <linux/personality.h>
#include <linux/unistd.h>
#include <linux/ipc.h>
-
#include <asm/uaccess.h>
+#include "entry.h"
/*
* sys_pipe() is the normal C calling standard for creating
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index cb232c1..7aec676 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -30,7 +30,7 @@
#include <linux/timex.h>
#include <linux/notifier.h>
#include <linux/clocksource.h>
-
+#include <linux/clockchips.h>
#include <asm/uaccess.h>
#include <asm/delay.h>
#include <asm/s390_ext.h>
@@ -39,6 +39,7 @@
#include <asm/irq_regs.h>
#include <asm/timer.h>
#include <asm/etr.h>
+#include <asm/cio.h>
/* change this if you have some constant time drift */
#define USECS_PER_JIFFY ((unsigned long) 1000000/HZ)
@@ -57,16 +58,16 @@
static ext_int_info_t ext_int_info_cc;
static ext_int_info_t ext_int_etr_cc;
-static u64 init_timer_cc;
static u64 jiffies_timer_cc;
-static u64 xtime_cc;
+
+static DEFINE_PER_CPU(struct clock_event_device, comparators);
/*
* Scheduler clock - returns current time in nanosec units.
*/
unsigned long long sched_clock(void)
{
- return ((get_clock() - jiffies_timer_cc) * 125) >> 9;
+ return ((get_clock_xt() - jiffies_timer_cc) * 125) >> 9;
}
/*
@@ -95,162 +96,40 @@
#define s390_do_profile() do { ; } while(0)
#endif /* CONFIG_PROFILING */
-/*
- * Advance the per cpu tick counter up to the time given with the
- * "time" argument. The per cpu update consists of accounting
- * the virtual cpu time, calling update_process_times and calling
- * the profiling hook. If xtime is before time it is advanced as well.
- */
-void account_ticks(u64 time)
+void clock_comparator_work(void)
{
- __u32 ticks;
- __u64 tmp;
+ struct clock_event_device *cd;
- /* Calculate how many ticks have passed. */
- if (time < S390_lowcore.jiffy_timer)
- return;
- tmp = time - S390_lowcore.jiffy_timer;
- if (tmp >= 2*CLK_TICKS_PER_JIFFY) { /* more than two ticks ? */
- ticks = __div(tmp, CLK_TICKS_PER_JIFFY) + 1;
- S390_lowcore.jiffy_timer +=
- CLK_TICKS_PER_JIFFY * (__u64) ticks;
- } else if (tmp >= CLK_TICKS_PER_JIFFY) {
- ticks = 2;
- S390_lowcore.jiffy_timer += 2*CLK_TICKS_PER_JIFFY;
- } else {
- ticks = 1;
- S390_lowcore.jiffy_timer += CLK_TICKS_PER_JIFFY;
- }
-
-#ifdef CONFIG_SMP
- /*
- * Do not rely on the boot cpu to do the calls to do_timer.
- * Spread it over all cpus instead.
- */
- write_seqlock(&xtime_lock);
- if (S390_lowcore.jiffy_timer > xtime_cc) {
- __u32 xticks;
- tmp = S390_lowcore.jiffy_timer - xtime_cc;
- if (tmp >= 2*CLK_TICKS_PER_JIFFY) {
- xticks = __div(tmp, CLK_TICKS_PER_JIFFY);
- xtime_cc += (__u64) xticks * CLK_TICKS_PER_JIFFY;
- } else {
- xticks = 1;
- xtime_cc += CLK_TICKS_PER_JIFFY;
- }
- do_timer(xticks);
- }
- write_sequnlock(&xtime_lock);
-#else
- do_timer(ticks);
-#endif
-
- while (ticks--)
- update_process_times(user_mode(get_irq_regs()));
-
+ S390_lowcore.clock_comparator = -1ULL;
+ set_clock_comparator(S390_lowcore.clock_comparator);
+ cd = &__get_cpu_var(comparators);
+ cd->event_handler(cd);
s390_do_profile();
}
-#ifdef CONFIG_NO_IDLE_HZ
-
-#ifdef CONFIG_NO_IDLE_HZ_INIT
-int sysctl_hz_timer = 0;
-#else
-int sysctl_hz_timer = 1;
-#endif
-
/*
- * Stop the HZ tick on the current CPU.
- * Only cpu_idle may call this function.
+ * Fixup the clock comparator.
*/
-static void stop_hz_timer(void)
+static void fixup_clock_comparator(unsigned long long delta)
{
- unsigned long flags;
- unsigned long seq, next;
- __u64 timer, todval;
- int cpu = smp_processor_id();
-
- if (sysctl_hz_timer != 0)
+ /* If nobody is waiting there's nothing to fix. */
+ if (S390_lowcore.clock_comparator == -1ULL)
return;
-
- cpu_set(cpu, nohz_cpu_mask);
-
- /*
- * Leave the clock comparator set up for the next timer
- * tick if either rcu or a softirq is pending.
- */
- if (rcu_needs_cpu(cpu) || local_softirq_pending()) {
- cpu_clear(cpu, nohz_cpu_mask);
- return;
- }
-
- /*
- * This cpu is going really idle. Set up the clock comparator
- * for the next event.
- */
- next = next_timer_interrupt();
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- timer = ((__u64) next) - ((__u64) jiffies) + jiffies_64;
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
- todval = -1ULL;
- /* Be careful about overflows. */
- if (timer < (-1ULL / CLK_TICKS_PER_JIFFY)) {
- timer = jiffies_timer_cc + timer * CLK_TICKS_PER_JIFFY;
- if (timer >= jiffies_timer_cc)
- todval = timer;
- }
- set_clock_comparator(todval);
+ S390_lowcore.clock_comparator += delta;
+ set_clock_comparator(S390_lowcore.clock_comparator);
}
-/*
- * Start the HZ tick on the current CPU.
- * Only cpu_idle may call this function.
- */
-static void start_hz_timer(void)
+static int s390_next_event(unsigned long delta,
+ struct clock_event_device *evt)
{
- if (!cpu_isset(smp_processor_id(), nohz_cpu_mask))
- return;
- account_ticks(get_clock());
- set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
- cpu_clear(smp_processor_id(), nohz_cpu_mask);
+ S390_lowcore.clock_comparator = get_clock() + delta;
+ set_clock_comparator(S390_lowcore.clock_comparator);
+ return 0;
}
-static int nohz_idle_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
+static void s390_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
{
- switch (action) {
- case S390_CPU_IDLE:
- stop_hz_timer();
- break;
- case S390_CPU_NOT_IDLE:
- start_hz_timer();
- break;
- }
- return NOTIFY_OK;
-}
-
-static struct notifier_block nohz_idle_nb = {
- .notifier_call = nohz_idle_notify,
-};
-
-static void __init nohz_init(void)
-{
- if (register_idle_notifier(&nohz_idle_nb))
- panic("Couldn't register idle notifier");
-}
-
-#endif
-
-/*
- * Set up per cpu jiffy timer and set the clock comparator.
- */
-static void setup_jiffy_timer(void)
-{
- /* Set up clock comparator to next jiffy. */
- S390_lowcore.jiffy_timer =
- jiffies_timer_cc + (jiffies_64 + 1) * CLK_TICKS_PER_JIFFY;
- set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
}
/*
@@ -259,7 +138,26 @@
*/
void init_cpu_timer(void)
{
- setup_jiffy_timer();
+ struct clock_event_device *cd;
+ int cpu;
+
+ S390_lowcore.clock_comparator = -1ULL;
+ set_clock_comparator(S390_lowcore.clock_comparator);
+
+ cpu = smp_processor_id();
+ cd = &per_cpu(comparators, cpu);
+ cd->name = "comparator";
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
+ cd->mult = 16777;
+ cd->shift = 12;
+ cd->min_delta_ns = 1;
+ cd->max_delta_ns = LONG_MAX;
+ cd->rating = 400;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = s390_next_event;
+ cd->set_mode = s390_set_mode;
+
+ clockevents_register_device(cd);
/* Enable clock comparator timer interrupt. */
__ctl_set_bit(0,11);
@@ -270,8 +168,6 @@
static void clock_comparator_interrupt(__u16 code)
{
- /* set clock comparator for next tick */
- set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
}
static void etr_reset(void);
@@ -316,8 +212,9 @@
*/
void __init time_init(void)
{
+ u64 init_timer_cc;
+
init_timer_cc = reset_tod_clock();
- xtime_cc = init_timer_cc + CLK_TICKS_PER_JIFFY;
jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY;
/* set xtime */
@@ -342,10 +239,6 @@
/* Enable TOD clock interrupts on the boot cpu. */
init_cpu_timer();
-#ifdef CONFIG_NO_IDLE_HZ
- nohz_init();
-#endif
-
#ifdef CONFIG_VIRT_TIMER
vtime_init();
#endif
@@ -699,53 +592,49 @@
}
/*
- * The time is "clock". xtime is what we think the time is.
+ * The time is "clock". old is what we think the time is.
* Adjust the value by a multiple of jiffies and add the delta to ntp.
* "delay" is an approximation how long the synchronization took. If
* the time correction is positive, then "delay" is subtracted from
* the time difference and only the remaining part is passed to ntp.
*/
-static void etr_adjust_time(unsigned long long clock, unsigned long long delay)
+static unsigned long long etr_adjust_time(unsigned long long old,
+ unsigned long long clock,
+ unsigned long long delay)
{
unsigned long long delta, ticks;
struct timex adjust;
- /*
- * We don't have to take the xtime lock because the cpu
- * executing etr_adjust_time is running disabled in
- * tasklet context and all other cpus are looping in
- * etr_sync_cpu_start.
- */
- if (clock > xtime_cc) {
+ if (clock > old) {
/* It is later than we thought. */
- delta = ticks = clock - xtime_cc;
+ delta = ticks = clock - old;
delta = ticks = (delta < delay) ? 0 : delta - delay;
delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
- init_timer_cc = init_timer_cc + delta;
- jiffies_timer_cc = jiffies_timer_cc + delta;
- xtime_cc = xtime_cc + delta;
adjust.offset = ticks * (1000000 / HZ);
} else {
/* It is earlier than we thought. */
- delta = ticks = xtime_cc - clock;
+ delta = ticks = old - clock;
delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
- init_timer_cc = init_timer_cc - delta;
- jiffies_timer_cc = jiffies_timer_cc - delta;
- xtime_cc = xtime_cc - delta;
+ delta = -delta;
adjust.offset = -ticks * (1000000 / HZ);
}
+ jiffies_timer_cc += delta;
if (adjust.offset != 0) {
printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
adjust.offset);
adjust.modes = ADJ_OFFSET_SINGLESHOT;
do_adjtimex(&adjust);
}
+ return delta;
}
+static struct {
+ int in_sync;
+ unsigned long long fixup_cc;
+} etr_sync;
+
static void etr_sync_cpu_start(void *dummy)
{
- int *in_sync = dummy;
-
etr_enable_sync_clock();
/*
* This looks like a busy wait loop but it isn't. etr_sync_cpus
@@ -753,7 +642,7 @@
* __udelay will stop the cpu on an enabled wait psw until the
* TOD is running again.
*/
- while (*in_sync == 0) {
+ while (etr_sync.in_sync == 0) {
__udelay(1);
/*
* A different cpu changes *in_sync. Therefore use
@@ -761,14 +650,14 @@
*/
barrier();
}
- if (*in_sync != 1)
+ if (etr_sync.in_sync != 1)
/* Didn't work. Clear per-cpu in sync bit again. */
etr_disable_sync_clock(NULL);
/*
* This round of TOD syncing is done. Set the clock comparator
* to the next tick and let the processor continue.
*/
- setup_jiffy_timer();
+ fixup_clock_comparator(etr_sync.fixup_cc);
}
static void etr_sync_cpu_end(void *dummy)
@@ -783,8 +672,8 @@
static int etr_sync_clock(struct etr_aib *aib, int port)
{
struct etr_aib *sync_port;
- unsigned long long clock, delay;
- int in_sync, follows;
+ unsigned long long clock, old_clock, delay, delta;
+ int follows;
int rc;
/* Check if the current aib is adjacent to the sync port aib. */
@@ -799,9 +688,9 @@
* successfully synced the clock. smp_call_function will
* return after all other cpus are in etr_sync_cpu_start.
*/
- in_sync = 0;
+ memset(&etr_sync, 0, sizeof(etr_sync));
preempt_disable();
- smp_call_function(etr_sync_cpu_start,&in_sync,0,0);
+ smp_call_function(etr_sync_cpu_start, NULL, 0, 0);
local_irq_disable();
etr_enable_sync_clock();
@@ -809,6 +698,7 @@
__ctl_set_bit(14, 21);
__ctl_set_bit(0, 29);
clock = ((unsigned long long) (aib->edf2.etv + 1)) << 32;
+ old_clock = get_clock();
if (set_clock(clock) == 0) {
__udelay(1); /* Wait for the clock to start. */
__ctl_clear_bit(0, 29);
@@ -817,16 +707,17 @@
/* Adjust Linux timing variables. */
delay = (unsigned long long)
(aib->edf2.etv - sync_port->edf2.etv) << 32;
- etr_adjust_time(clock, delay);
- setup_jiffy_timer();
+ delta = etr_adjust_time(old_clock, clock, delay);
+ etr_sync.fixup_cc = delta;
+ fixup_clock_comparator(delta);
/* Verify that the clock is properly set. */
if (!etr_aib_follows(sync_port, aib, port)) {
/* Didn't work. */
etr_disable_sync_clock(NULL);
- in_sync = -EAGAIN;
+ etr_sync.in_sync = -EAGAIN;
rc = -EAGAIN;
} else {
- in_sync = 1;
+ etr_sync.in_sync = 1;
rc = 0;
}
} else {
@@ -834,7 +725,7 @@
__ctl_clear_bit(0, 29);
__ctl_clear_bit(14, 21);
etr_disable_sync_clock(NULL);
- in_sync = -EAGAIN;
+ etr_sync.in_sync = -EAGAIN;
rc = -EAGAIN;
}
local_irq_enable();
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
new file mode 100644
index 0000000..12b39b3
--- /dev/null
+++ b/arch/s390/kernel/topology.c
@@ -0,0 +1,314 @@
+/*
+ * Copyright IBM Corp. 2007
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <asm/delay.h>
+#include <asm/s390_ext.h>
+#include <asm/sysinfo.h>
+
+#define CPU_BITS 64
+#define NR_MAG 6
+
+#define PTF_HORIZONTAL (0UL)
+#define PTF_VERTICAL (1UL)
+#define PTF_CHECK (2UL)
+
+struct tl_cpu {
+ unsigned char reserved0[4];
+ unsigned char :6;
+ unsigned char pp:2;
+ unsigned char reserved1;
+ unsigned short origin;
+ unsigned long mask[CPU_BITS / BITS_PER_LONG];
+};
+
+struct tl_container {
+ unsigned char reserved[8];
+};
+
+union tl_entry {
+ unsigned char nl;
+ struct tl_cpu cpu;
+ struct tl_container container;
+};
+
+struct tl_info {
+ unsigned char reserved0[2];
+ unsigned short length;
+ unsigned char mag[NR_MAG];
+ unsigned char reserved1;
+ unsigned char mnest;
+ unsigned char reserved2[4];
+ union tl_entry tle[0];
+};
+
+struct core_info {
+ struct core_info *next;
+ cpumask_t mask;
+};
+
+static void topology_work_fn(struct work_struct *work);
+static struct tl_info *tl_info;
+static struct core_info core_info;
+static int machine_has_topology;
+static int machine_has_topology_irq;
+static struct timer_list topology_timer;
+static void set_topology_timer(void);
+static DECLARE_WORK(topology_work, topology_work_fn);
+
+cpumask_t cpu_coregroup_map(unsigned int cpu)
+{
+ struct core_info *core = &core_info;
+ cpumask_t mask;
+
+ cpus_clear(mask);
+ if (!machine_has_topology)
+ return cpu_present_map;
+ mutex_lock(&smp_cpu_state_mutex);
+ while (core) {
+ if (cpu_isset(cpu, core->mask)) {
+ mask = core->mask;
+ break;
+ }
+ core = core->next;
+ }
+ mutex_unlock(&smp_cpu_state_mutex);
+ if (cpus_empty(mask))
+ mask = cpumask_of_cpu(cpu);
+ return mask;
+}
+
+static void add_cpus_to_core(struct tl_cpu *tl_cpu, struct core_info *core)
+{
+ unsigned int cpu;
+
+ for (cpu = find_first_bit(&tl_cpu->mask[0], CPU_BITS);
+ cpu < CPU_BITS;
+ cpu = find_next_bit(&tl_cpu->mask[0], CPU_BITS, cpu + 1))
+ {
+ unsigned int rcpu, lcpu;
+
+ rcpu = CPU_BITS - 1 - cpu + tl_cpu->origin;
+ for_each_present_cpu(lcpu) {
+ if (__cpu_logical_map[lcpu] == rcpu) {
+ cpu_set(lcpu, core->mask);
+ smp_cpu_polarization[lcpu] = tl_cpu->pp;
+ }
+ }
+ }
+}
+
+static void clear_cores(void)
+{
+ struct core_info *core = &core_info;
+
+ while (core) {
+ cpus_clear(core->mask);
+ core = core->next;
+ }
+}
+
+static union tl_entry *next_tle(union tl_entry *tle)
+{
+ if (tle->nl)
+ return (union tl_entry *)((struct tl_container *)tle + 1);
+ else
+ return (union tl_entry *)((struct tl_cpu *)tle + 1);
+}
+
+static void tl_to_cores(struct tl_info *info)
+{
+ union tl_entry *tle, *end;
+ struct core_info *core = &core_info;
+
+ mutex_lock(&smp_cpu_state_mutex);
+ clear_cores();
+ tle = info->tle;
+ end = (union tl_entry *)((unsigned long)info + info->length);
+ while (tle < end) {
+ switch (tle->nl) {
+ case 5:
+ case 4:
+ case 3:
+ case 2:
+ break;
+ case 1:
+ core = core->next;
+ break;
+ case 0:
+ add_cpus_to_core(&tle->cpu, core);
+ break;
+ default:
+ clear_cores();
+ machine_has_topology = 0;
+ return;
+ }
+ tle = next_tle(tle);
+ }
+ mutex_unlock(&smp_cpu_state_mutex);
+}
+
+static void topology_update_polarization_simple(void)
+{
+ int cpu;
+
+ mutex_lock(&smp_cpu_state_mutex);
+ for_each_present_cpu(cpu)
+ smp_cpu_polarization[cpu] = POLARIZATION_HRZ;
+ mutex_unlock(&smp_cpu_state_mutex);
+}
+
+static int ptf(unsigned long fc)
+{
+ int rc;
+
+ asm volatile(
+ " .insn rre,0xb9a20000,%1,%1\n"
+ " ipm %0\n"
+ " srl %0,28\n"
+ : "=d" (rc)
+ : "d" (fc) : "cc");
+ return rc;
+}
+
+int topology_set_cpu_management(int fc)
+{
+ int cpu;
+ int rc;
+
+ if (!machine_has_topology)
+ return -EOPNOTSUPP;
+ if (fc)
+ rc = ptf(PTF_VERTICAL);
+ else
+ rc = ptf(PTF_HORIZONTAL);
+ if (rc)
+ return -EBUSY;
+ for_each_present_cpu(cpu)
+ smp_cpu_polarization[cpu] = POLARIZATION_UNKNWN;
+ return rc;
+}
+
+void arch_update_cpu_topology(void)
+{
+ struct tl_info *info = tl_info;
+ struct sys_device *sysdev;
+ int cpu;
+
+ if (!machine_has_topology) {
+ topology_update_polarization_simple();
+ return;
+ }
+ stsi(info, 15, 1, 2);
+ tl_to_cores(info);
+ for_each_online_cpu(cpu) {
+ sysdev = get_cpu_sysdev(cpu);
+ kobject_uevent(&sysdev->kobj, KOBJ_CHANGE);
+ }
+}
+
+static void topology_work_fn(struct work_struct *work)
+{
+ arch_reinit_sched_domains();
+}
+
+void topology_schedule_update(void)
+{
+ schedule_work(&topology_work);
+}
+
+static void topology_timer_fn(unsigned long ignored)
+{
+ if (ptf(PTF_CHECK))
+ topology_schedule_update();
+ set_topology_timer();
+}
+
+static void set_topology_timer(void)
+{
+ topology_timer.function = topology_timer_fn;
+ topology_timer.data = 0;
+ topology_timer.expires = jiffies + 60 * HZ;
+ add_timer(&topology_timer);
+}
+
+static void topology_interrupt(__u16 code)
+{
+ schedule_work(&topology_work);
+}
+
+static int __init init_topology_update(void)
+{
+ int rc;
+
+ if (!machine_has_topology) {
+ topology_update_polarization_simple();
+ return 0;
+ }
+ init_timer_deferrable(&topology_timer);
+ if (machine_has_topology_irq) {
+ rc = register_external_interrupt(0x2005, topology_interrupt);
+ if (rc)
+ return rc;
+ ctl_set_bit(0, 8);
+ }
+ else
+ set_topology_timer();
+ return 0;
+}
+__initcall(init_topology_update);
+
+void __init s390_init_cpu_topology(void)
+{
+ unsigned long long facility_bits;
+ struct tl_info *info;
+ struct core_info *core;
+ int nr_cores;
+ int i;
+
+ if (stfle(&facility_bits, 1) <= 0)
+ return;
+ if (!(facility_bits & (1ULL << 52)) || !(facility_bits & (1ULL << 61)))
+ return;
+ machine_has_topology = 1;
+
+ if (facility_bits & (1ULL << 51))
+ machine_has_topology_irq = 1;
+
+ tl_info = alloc_bootmem_pages(PAGE_SIZE);
+ if (!tl_info)
+ goto error;
+ info = tl_info;
+ stsi(info, 15, 1, 2);
+
+ nr_cores = info->mag[NR_MAG - 2];
+ for (i = 0; i < info->mnest - 2; i++)
+ nr_cores *= info->mag[NR_MAG - 3 - i];
+
+ printk(KERN_INFO "CPU topology:");
+ for (i = 0; i < NR_MAG; i++)
+ printk(" %d", info->mag[i]);
+ printk(" / %d\n", info->mnest);
+
+ core = &core_info;
+ for (i = 0; i < nr_cores; i++) {
+ core->next = alloc_bootmem(sizeof(struct core_info));
+ core = core->next;
+ if (!core)
+ goto error;
+ }
+ return;
+error:
+ machine_has_topology = 0;
+ machine_has_topology_irq = 0;
+}
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 60f728a..57b607b 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -42,11 +42,8 @@
#include <asm/s390_ext.h>
#include <asm/lowcore.h>
#include <asm/debug.h>
+#include "entry.h"
-/* Called from entry.S only */
-extern void handle_per_exception(struct pt_regs *regs);
-
-typedef void pgm_check_handler_t(struct pt_regs *, long);
pgm_check_handler_t *pgm_check_table[128];
#ifdef CONFIG_SYSCTL
@@ -59,7 +56,6 @@
extern pgm_check_handler_t do_protection_exception;
extern pgm_check_handler_t do_dat_exception;
-extern pgm_check_handler_t do_monitor_call;
extern pgm_check_handler_t do_asce_exception;
#define stack_pointer ({ void **sp; asm("la %0,0(15)" : "=&d" (sp)); sp; })
@@ -138,7 +134,6 @@
else
__show_trace(sp, S390_lowcore.thread_info,
S390_lowcore.thread_info + THREAD_SIZE);
- printk("\n");
if (!task)
task = current;
debug_show_held_locks(task);
@@ -166,6 +161,15 @@
show_trace(task, sp);
}
+#ifdef CONFIG_64BIT
+void show_last_breaking_event(struct pt_regs *regs)
+{
+ printk("Last Breaking-Event-Address:\n");
+ printk(" [<%016lx>] ", regs->args[0] & PSW_ADDR_INSN);
+ print_symbol("%s\n", regs->args[0] & PSW_ADDR_INSN);
+}
+#endif
+
/*
* The architecture-independent dump_stack generator
*/
@@ -739,6 +743,5 @@
pgm_check_table[0x15] = &operand_exception;
pgm_check_table[0x1C] = &space_switch_exception;
pgm_check_table[0x1D] = &hfp_sqrt_exception;
- pgm_check_table[0x40] = &do_monitor_call;
pfault_irq_init();
}
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 70f2a86..eae21a8 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -34,7 +34,7 @@
*/
void __udelay(unsigned long usecs)
{
- u64 end, time, jiffy_timer = 0;
+ u64 end, time, old_cc = 0;
unsigned long flags, cr0, mask, dummy;
int irq_context;
@@ -43,8 +43,8 @@
local_bh_disable();
local_irq_save(flags);
if (raw_irqs_disabled_flags(flags)) {
- jiffy_timer = S390_lowcore.jiffy_timer;
- S390_lowcore.jiffy_timer = -1ULL - (4096 << 12);
+ old_cc = S390_lowcore.clock_comparator;
+ S390_lowcore.clock_comparator = -1ULL;
__ctl_store(cr0, 0, 0);
dummy = (cr0 & 0xffff00e0) | 0x00000800;
__ctl_load(dummy , 0, 0);
@@ -55,8 +55,8 @@
end = get_clock() + ((u64) usecs << 12);
do {
- time = end < S390_lowcore.jiffy_timer ?
- end : S390_lowcore.jiffy_timer;
+ time = end < S390_lowcore.clock_comparator ?
+ end : S390_lowcore.clock_comparator;
set_clock_comparator(time);
trace_hardirqs_on();
__load_psw_mask(mask);
@@ -65,10 +65,10 @@
if (raw_irqs_disabled_flags(flags)) {
__ctl_load(cr0, 0, 0);
- S390_lowcore.jiffy_timer = jiffy_timer;
+ S390_lowcore.clock_comparator = old_cc;
}
if (!irq_context)
_local_bh_enable();
- set_clock_comparator(S390_lowcore.jiffy_timer);
+ set_clock_comparator(S390_lowcore.clock_comparator);
local_irq_restore(flags);
}
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index 5efdfe9..d66215b 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -302,6 +302,10 @@
pte_t *pte_from, *pte_to;
int write_user;
+ if (segment_eq(get_fs(), KERNEL_DS)) {
+ memcpy((void __force *) to, (void __force *) from, n);
+ return 0;
+ }
done = 0;
retry:
spin_lock(&mm->page_table_lock);
@@ -361,18 +365,10 @@
: "0" (-EFAULT), "d" (oparg), "a" (uaddr), \
"m" (*uaddr) : "cc" );
-int futex_atomic_op_pt(int op, int __user *uaddr, int oparg, int *old)
+static int __futex_atomic_op_pt(int op, int __user *uaddr, int oparg, int *old)
{
int oldval = 0, newval, ret;
- spin_lock(¤t->mm->page_table_lock);
- uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
- if (!uaddr) {
- spin_unlock(¤t->mm->page_table_lock);
- return -EFAULT;
- }
- get_page(virt_to_page(uaddr));
- spin_unlock(¤t->mm->page_table_lock);
switch (op) {
case FUTEX_OP_SET:
__futex_atomic_op("lr %2,%5\n",
@@ -397,17 +393,17 @@
default:
ret = -ENOSYS;
}
- put_page(virt_to_page(uaddr));
- *old = oldval;
+ if (ret == 0)
+ *old = oldval;
return ret;
}
-int futex_atomic_cmpxchg_pt(int __user *uaddr, int oldval, int newval)
+int futex_atomic_op_pt(int op, int __user *uaddr, int oparg, int *old)
{
int ret;
- if (!current->mm)
- return -EFAULT;
+ if (segment_eq(get_fs(), KERNEL_DS))
+ return __futex_atomic_op_pt(op, uaddr, oparg, old);
spin_lock(¤t->mm->page_table_lock);
uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
if (!uaddr) {
@@ -416,13 +412,40 @@
}
get_page(virt_to_page(uaddr));
spin_unlock(¤t->mm->page_table_lock);
- asm volatile(" cs %1,%4,0(%5)\n"
- "0: lr %0,%1\n"
- "1:\n"
- EX_TABLE(0b,1b)
+ ret = __futex_atomic_op_pt(op, uaddr, oparg, old);
+ put_page(virt_to_page(uaddr));
+ return ret;
+}
+
+static int __futex_atomic_cmpxchg_pt(int __user *uaddr, int oldval, int newval)
+{
+ int ret;
+
+ asm volatile("0: cs %1,%4,0(%5)\n"
+ "1: lr %0,%1\n"
+ "2:\n"
+ EX_TABLE(0b,2b) EX_TABLE(1b,2b)
: "=d" (ret), "+d" (oldval), "=m" (*uaddr)
: "0" (-EFAULT), "d" (newval), "a" (uaddr), "m" (*uaddr)
: "cc", "memory" );
+ return ret;
+}
+
+int futex_atomic_cmpxchg_pt(int __user *uaddr, int oldval, int newval)
+{
+ int ret;
+
+ if (segment_eq(get_fs(), KERNEL_DS))
+ return __futex_atomic_cmpxchg_pt(uaddr, oldval, newval);
+ spin_lock(¤t->mm->page_table_lock);
+ uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
+ if (!uaddr) {
+ spin_unlock(¤t->mm->page_table_lock);
+ return -EFAULT;
+ }
+ get_page(virt_to_page(uaddr));
+ spin_unlock(¤t->mm->page_table_lock);
+ ret = __futex_atomic_cmpxchg_pt(uaddr, oldval, newval);
put_page(virt_to_page(uaddr));
return ret;
}
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index 880b0eb..ed2af0a 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -289,22 +289,8 @@
rc = add_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);
- switch (rc) {
- case 0:
- break;
- case -ENOSPC:
- PRINT_WARN("segment_load: not loading segment %s - overlaps "
- "storage/segment\n", name);
+ if (rc)
goto out_free;
- case -ERANGE:
- PRINT_WARN("segment_load: not loading segment %s - exceeds "
- "kernel mapping range\n", name);
- goto out_free;
- default:
- PRINT_WARN("segment_load: not loading segment %s (rc: %d)\n",
- name, rc);
- goto out_free;
- }
seg->res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (seg->res == NULL) {
@@ -582,8 +568,59 @@
mutex_unlock(&dcss_lock);
}
+/*
+ * print appropriate error message for segment_load()/segment_type()
+ * return code
+ */
+void segment_warning(int rc, char *seg_name)
+{
+ switch (rc) {
+ case -ENOENT:
+ PRINT_WARN("cannot load/query segment %s, "
+ "does not exist\n", seg_name);
+ break;
+ case -ENOSYS:
+ PRINT_WARN("cannot load/query segment %s, "
+ "not running on VM\n", seg_name);
+ break;
+ case -EIO:
+ PRINT_WARN("cannot load/query segment %s, "
+ "hardware error\n", seg_name);
+ break;
+ case -ENOTSUPP:
+ PRINT_WARN("cannot load/query segment %s, "
+ "is a multi-part segment\n", seg_name);
+ break;
+ case -ENOSPC:
+ PRINT_WARN("cannot load/query segment %s, "
+ "overlaps with storage\n", seg_name);
+ break;
+ case -EBUSY:
+ PRINT_WARN("cannot load/query segment %s, "
+ "overlaps with already loaded dcss\n", seg_name);
+ break;
+ case -EPERM:
+ PRINT_WARN("cannot load/query segment %s, "
+ "already loaded in incompatible mode\n", seg_name);
+ break;
+ case -ENOMEM:
+ PRINT_WARN("cannot load/query segment %s, "
+ "out of memory\n", seg_name);
+ break;
+ case -ERANGE:
+ PRINT_WARN("cannot load/query segment %s, "
+ "exceeds kernel mapping range\n", seg_name);
+ break;
+ default:
+ PRINT_WARN("cannot load/query segment %s, "
+ "return value %i\n", seg_name, rc);
+ break;
+ }
+}
+
EXPORT_SYMBOL(segment_load);
EXPORT_SYMBOL(segment_unload);
EXPORT_SYMBOL(segment_save);
EXPORT_SYMBOL(segment_type);
EXPORT_SYMBOL(segment_modify_shared);
+EXPORT_SYMBOL(segment_warning);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index ed13d42..2650f46 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -28,11 +28,11 @@
#include <linux/hardirq.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
-
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/s390_ext.h>
#include <asm/mmu_context.h>
+#include "../kernel/entry.h"
#ifndef CONFIG_64BIT
#define __FAIL_ADDR_MASK 0x7ffff000
@@ -50,8 +50,6 @@
extern int sysctl_userprocess_debug;
#endif
-extern void die(const char *,struct pt_regs *,long);
-
#ifdef CONFIG_KPROBES
static inline int notify_page_fault(struct pt_regs *regs, long err)
{
@@ -245,11 +243,6 @@
}
#ifdef CONFIG_S390_EXEC_PROTECT
-extern long sys_sigreturn(struct pt_regs *regs);
-extern long sys_rt_sigreturn(struct pt_regs *regs);
-extern long sys32_sigreturn(struct pt_regs *regs);
-extern long sys32_rt_sigreturn(struct pt_regs *regs);
-
static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
unsigned long address, unsigned long error_code)
{
@@ -270,15 +263,15 @@
#ifdef CONFIG_COMPAT
compat = test_tsk_thread_flag(current, TIF_31BIT);
if (compat && instruction == 0x0a77)
- sys32_sigreturn(regs);
+ sys32_sigreturn();
else if (compat && instruction == 0x0aad)
- sys32_rt_sigreturn(regs);
+ sys32_rt_sigreturn();
else
#endif
if (instruction == 0x0a77)
- sys_sigreturn(regs);
+ sys_sigreturn();
else if (instruction == 0x0aad)
- sys_rt_sigreturn(regs);
+ sys_rt_sigreturn();
else {
current->thread.prot_addr = address;
current->thread.trap_no = error_code;
@@ -424,7 +417,7 @@
}
void __kprobes do_protection_exception(struct pt_regs *regs,
- unsigned long error_code)
+ long error_code)
{
/* Protection exception is supressing, decrement psw address. */
regs->psw.addr -= (error_code >> 16);
@@ -440,7 +433,7 @@
do_exception(regs, 4, 1);
}
-void __kprobes do_dat_exception(struct pt_regs *regs, unsigned long error_code)
+void __kprobes do_dat_exception(struct pt_regs *regs, long error_code)
{
do_exception(regs, error_code & 0xff, 0);
}
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 8053245..202c952 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -50,7 +50,6 @@
printk("Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages << (PAGE_SHIFT - 10));
i = max_mapnr;
while (i-- > 0) {
if (!pfn_valid(i))
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 1272048..8d2cd1d 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -72,9 +72,6 @@
config SYS_SUPPORTS_PCI
bool
-config ARCH_MAY_HAVE_PC_FDC
- bool
-
config STACKTRACE_SUPPORT
def_bool y
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 3dda24d..89b4086 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -44,7 +44,7 @@
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
- -C none -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
+ -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S
index a8399b0..06ac31f 100644
--- a/arch/sh/boot/compressed/head_32.S
+++ b/arch/sh/boot/compressed/head_32.S
@@ -7,7 +7,6 @@
.text
-#include <linux/linkage.h>
#include <asm/page.h>
.global startup
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
index 1d4ecbf..f72c198 100644
--- a/arch/sh/boot/compressed/head_64.S
+++ b/arch/sh/boot/compressed/head_64.S
@@ -13,7 +13,6 @@
* Modification for compressed loader:
* Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
*/
-#include <linux/linkage.h>
#include <asm/cache.h>
#include <asm/cpu/mmu_context.h>
#include <asm/cpu/registers.h>
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 62bf373..4bbdce3 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -5,7 +5,7 @@
extra-y := head_32.o init_task.o vmlinux.lds
obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \
- ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o sys_sh32.o \
+ ptrace_32.o setup.o signal_32.o sys_sh.o sys_sh32.o \
syscalls_32.o time_32.o topology.o traps.o traps_32.o
obj-y += cpu/ timers/
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index e01283d..6edf53b 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -1,7 +1,7 @@
extra-y := head_64.o init_task.o vmlinux.lds
obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \
- ptrace_64.o semaphore.o setup.o signal_64.o sys_sh.o sys_sh64.o \
+ ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \
syscalls_64.o time_64.o topology.o traps.o traps_64.o
obj-y += cpu/ timers/
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
index ff99562..5627c0b 100644
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ b/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -13,6 +13,7 @@
#include <linux/signal.h>
#include <asm/processor.h>
#include <asm/io.h>
+#include <asm/fpu.h>
/* The PR (precision) bit in the FP Status Register must be clear when
* an frchg instruction is executed, otherwise the instruction is undefined.
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 817f993..8020796 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -16,6 +16,7 @@
#include <asm/cpu/fpu.h>
#include <asm/processor.h>
#include <asm/system.h>
+#include <asm/fpu.h>
/* The PR (precision) bit in the FP Status Register must be clear when
* an frchg instruction is executed, otherwise the instruction is undefined.
diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c
index 30b76a9..dd4f51f 100644
--- a/arch/sh/kernel/cpu/sh5/fpu.c
+++ b/arch/sh/kernel/cpu/sh5/fpu.c
@@ -17,6 +17,7 @@
#include <asm/processor.h>
#include <asm/user.h>
#include <asm/io.h>
+#include <asm/fpu.h>
/*
* Initially load the FPU with signalling NANS. This bit pattern
diff --git a/arch/sh/kernel/dump_task.c b/arch/sh/kernel/dump_task.c
index 4a8a408..1db7ce0 100644
--- a/arch/sh/kernel/dump_task.c
+++ b/arch/sh/kernel/dump_task.c
@@ -1,5 +1,6 @@
#include <linux/elfcore.h>
#include <linux/sched.h>
+#include <asm/fpu.h>
/*
* Capture the user space registers if the task is not running (in user space)
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 9ab1926..b98e37a 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -25,6 +25,7 @@
#include <asm/pgalloc.h>
#include <asm/system.h>
#include <asm/ubc.h>
+#include <asm/fpu.h>
static int hlt_counter;
int ubc_usercnt = 0;
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 046999b..0283d81 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -28,6 +28,7 @@
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/mmu_context.h>
+#include <asm/fpu.h>
struct task_struct *last_task_used_math = NULL;
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index f6fbdfa..d453c47 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -33,6 +33,7 @@
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/mmu_context.h>
+#include <asm/fpu.h>
/* This mask defines the bits of the SR which the user is not allowed to
change, which are everything except S, Q, M, PR, SZ, FR. */
diff --git a/arch/sh/kernel/semaphore.c b/arch/sh/kernel/semaphore.c
deleted file mode 100644
index 184119e..0000000
--- a/arch/sh/kernel/semaphore.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Just taken from alpha implementation.
- * This can't work well, perhaps.
- */
-/*
- * Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/init.h>
-#include <asm/semaphore.h>
-#include <asm/semaphore-helper.h>
-
-DEFINE_SPINLOCK(semaphore_wake_lock);
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit. ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore. The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
- wake_one_more(sem);
- wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function. Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible. This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return. If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-#define DOWN_VAR \
- struct task_struct *tsk = current; \
- wait_queue_t wait; \
- init_waitqueue_entry(&wait, tsk);
-
-#define DOWN_HEAD(task_state) \
- \
- \
- tsk->state = (task_state); \
- add_wait_queue(&sem->wait, &wait); \
- \
- /* \
- * Ok, we're set up. sem->count is known to be less than zero \
- * so we must wait. \
- * \
- * We can let go the lock for purposes of waiting. \
- * We re-acquire it after awaking so as to protect \
- * all semaphore operations. \
- * \
- * If "up()" is called before we call waking_non_zero() then \
- * we will catch it right away. If it is called later then \
- * we will have to go through a wakeup cycle to catch it. \
- * \
- * Multiple waiters contend for the semaphore lock to see \
- * who gets to gate through and who has to wait some more. \
- */ \
- for (;;) {
-
-#define DOWN_TAIL(task_state) \
- tsk->state = (task_state); \
- } \
- tsk->state = TASK_RUNNING; \
- remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
- DOWN_VAR
- DOWN_HEAD(TASK_UNINTERRUPTIBLE)
- if (waking_non_zero(sem))
- break;
- schedule();
- DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
- DOWN_VAR
- DOWN_HEAD(TASK_INTERRUPTIBLE)
-
- ret = waking_non_zero_interruptible(sem, tsk);
- if (ret)
- {
- if (ret == 1)
- /* ret != 0 only if we get interrupted -arca */
- ret = 0;
- break;
- }
- schedule();
- DOWN_TAIL(TASK_INTERRUPTIBLE)
- return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
- return waking_non_zero_trylock(sem);
-}
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index d80de39..6d40546 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -9,7 +9,6 @@
#include <linux/pci.h>
#include <linux/irq.h>
#include <asm/sections.h>
-#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/checksum.h>
@@ -48,12 +47,6 @@
EXPORT_SYMBOL(get_vm_area);
#endif
-/* semaphore exports */
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__down_trylock);
-
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
EXPORT_SYMBOL(__const_udelay);
@@ -149,3 +142,4 @@
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(_ebss);
+EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index dd38a68..a310c97 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -16,7 +16,6 @@
#include <linux/in6.h>
#include <linux/interrupt.h>
#include <linux/screen_info.h>
-#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/checksum.h>
@@ -37,13 +36,11 @@
EXPORT_SYMBOL(screen_info);
#endif
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_trylock);
-EXPORT_SYMBOL(__up);
EXPORT_SYMBOL(__put_user_asm_l);
EXPORT_SYMBOL(__get_user_asm_l);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_user);
+EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f6b5fbf..f311551 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -29,6 +29,7 @@
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
+#include <asm/fpu.h>
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 80bde19..552eb81 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -26,6 +26,7 @@
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
+#include <asm/fpu.h>
#define REG_RET 9
#define REG_ARG1 2
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index baa4fa3..e08b3bf 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -25,6 +25,7 @@
#include <linux/limits.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#include <asm/fpu.h>
#ifdef CONFIG_SH_KGDB
#include <asm/kgdb.h>
diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c
index 1b58a74..a85831c 100644
--- a/arch/sh/kernel/traps_64.c
+++ b/arch/sh/kernel/traps_64.c
@@ -30,6 +30,7 @@
#include <asm/atomic.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
+#include <asm/fpu.h>
#undef DEBUG_EXCEPTION
#ifdef DEBUG_EXCEPTION
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index bf1b15d..2712bb1 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -12,7 +12,7 @@
sys_sparc.o sunos_asm.o systbls.o \
time.o windows.o cpu.o devices.o sclow.o \
tadpole.o tick14.o ptrace.o sys_solaris.o \
- unaligned.o una_asm.o muldiv.o semaphore.o \
+ unaligned.o una_asm.o muldiv.o \
prom.o of_device.o devres.o
devres-y = ../../../kernel/irq/devres.o
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 5b54f11..7f44ae6 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -325,7 +325,7 @@
const struct user_regset_view *view;
int ret;
- view = task_user_regset_view(child);
+ view = task_user_regset_view(current);
switch(request) {
case PTRACE_GETREGS: {
diff --git a/arch/sparc/kernel/semaphore.c b/arch/sparc/kernel/semaphore.c
deleted file mode 100644
index 0c37c1a..0000000
--- a/arch/sparc/kernel/semaphore.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* $Id: semaphore.c,v 1.7 2001/04/18 21:06:05 davem Exp $ */
-
-/* sparc32 semaphore implementation, based on i386 version */
-
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <asm/semaphore.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is
- * protected by the semaphore spinlock.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- * - only on a boundary condition do we need to care. When we go
- * from a negative count to a non-negative, we wake people up.
- * - when we go from a non-negative count to a negative do we
- * (a) synchronize with the "sleeper" count and (b) make sure
- * that we're on the wakeup list before we synchronize so that
- * we cannot lose wakeup events.
- */
-
-void __up(struct semaphore *sem)
-{
- wake_up(&sem->wait);
-}
-
-static DEFINE_SPINLOCK(semaphore_lock);
-
-void __sched __down(struct semaphore * sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- tsk->state = TASK_UNINTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- spin_lock_irq(&semaphore_lock);
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock.
- */
- if (!atomic24_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irq(&semaphore_lock);
-
- schedule();
- tsk->state = TASK_UNINTERRUPTIBLE;
- spin_lock_irq(&semaphore_lock);
- }
- spin_unlock_irq(&semaphore_lock);
- remove_wait_queue(&sem->wait, &wait);
- tsk->state = TASK_RUNNING;
- wake_up(&sem->wait);
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- tsk->state = TASK_INTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- spin_lock_irq(&semaphore_lock);
- sem->sleepers ++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * With signals pending, this turns into
- * the trylock failure case - we won't be
- * sleeping, and we* can't get the lock as
- * it has contention. Just correct the count
- * and exit.
- */
- if (signal_pending(current)) {
- retval = -EINTR;
- sem->sleepers = 0;
- atomic24_add(sleepers, &sem->count);
- break;
- }
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock. The
- * "-1" is because we're still hoping to get
- * the lock.
- */
- if (!atomic24_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irq(&semaphore_lock);
-
- schedule();
- tsk->state = TASK_INTERRUPTIBLE;
- spin_lock_irq(&semaphore_lock);
- }
- spin_unlock_irq(&semaphore_lock);
- tsk->state = TASK_RUNNING;
- remove_wait_queue(&sem->wait, &wait);
- wake_up(&sem->wait);
- return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- */
-int __down_trylock(struct semaphore * sem)
-{
- int sleepers;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_lock, flags);
- sleepers = sem->sleepers + 1;
- sem->sleepers = 0;
-
- /*
- * Add "everybody else" and us into it. They aren't
- * playing, because we own the spinlock.
- */
- if (!atomic24_add_negative(sleepers, &sem->count))
- wake_up(&sem->wait);
-
- spin_unlock_irqrestore(&semaphore_lock, flags);
- return 1;
-}
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index c1025e5..97b1de0 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -107,11 +107,6 @@
EXPORT_SYMBOL(___rw_read_exit);
EXPORT_SYMBOL(___rw_write_enter);
#endif
-/* semaphores */
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_trylock);
-EXPORT_SYMBOL(__down_interruptible);
EXPORT_SYMBOL(sparc_valid_addr_bitmap);
EXPORT_SYMBOL(phys_base);
diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile
index 1bf5b18..459462e 100644
--- a/arch/sparc64/kernel/Makefile
+++ b/arch/sparc64/kernel/Makefile
@@ -10,7 +10,7 @@
obj-y := process.o setup.o cpu.o idprom.o \
traps.o auxio.o una_asm.o sysfs.o iommu.o \
irq.o ptrace.o time.o sys_sparc.o signal.o \
- unaligned.o central.o pci.o starfire.o semaphore.o \
+ unaligned.o central.o pci.o starfire.o \
power.o sbus.o sparc64_ksyms.o chmc.o \
visemul.o prom.o of_device.o hvapi.o sstate.o mdesc.o
diff --git a/arch/sparc64/kernel/iommu.c b/arch/sparc64/kernel/iommu.c
index b781d3d..756fa24 100644
--- a/arch/sparc64/kernel/iommu.c
+++ b/arch/sparc64/kernel/iommu.c
@@ -516,9 +516,11 @@
unsigned long flags, handle, prot, ctx;
dma_addr_t dma_next = 0, dma_addr;
unsigned int max_seg_size;
+ unsigned long seg_boundary_size;
int outcount, incount, i;
struct strbuf *strbuf;
struct iommu *iommu;
+ unsigned long base_shift;
BUG_ON(direction == DMA_NONE);
@@ -549,8 +551,11 @@
outs->dma_length = 0;
max_seg_size = dma_get_max_seg_size(dev);
+ seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+ IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+ base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
for_each_sg(sglist, s, nelems, i) {
- unsigned long paddr, npages, entry, slen;
+ unsigned long paddr, npages, entry, out_entry = 0, slen;
iopte_t *base;
slen = s->length;
@@ -593,7 +598,9 @@
* - allocated dma_addr isn't contiguous to previous allocation
*/
if ((dma_addr != dma_next) ||
- (outs->dma_length + s->length > max_seg_size)) {
+ (outs->dma_length + s->length > max_seg_size) ||
+ (is_span_boundary(out_entry, base_shift,
+ seg_boundary_size, outs, s))) {
/* Can't merge: create a new segment */
segstart = s;
outcount++;
@@ -607,6 +614,7 @@
/* This is a new segment, fill entries */
outs->dma_address = dma_addr;
outs->dma_length = slen;
+ out_entry = entry;
}
/* Calculate next page pointer for contiguous check */
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index 0713bd5..f3575a6 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -12,6 +12,7 @@
#include <linux/mm.h>
#include <linux/scatterlist.h>
#include <linux/device.h>
+#include <linux/iommu-helper.h>
#include <asm/iommu.h>
#include <asm/scatterlist.h>
@@ -45,17 +46,16 @@
return npages;
}
-static inline unsigned long calc_npages(struct scatterlist *sglist, int nelems)
+static inline int is_span_boundary(unsigned long entry,
+ unsigned long shift,
+ unsigned long boundary_size,
+ struct scatterlist *outs,
+ struct scatterlist *sg)
{
- unsigned long i, npages = 0;
- struct scatterlist *sg;
+ unsigned long paddr = SG_ENT_PHYS_ADDRESS(outs);
+ int nr = iommu_num_pages(paddr, outs->dma_length + sg->length);
- for_each_sg(sglist, sg, nelems, i) {
- unsigned long paddr = SG_ENT_PHYS_ADDRESS(sg);
- npages += iommu_num_pages(paddr, sg->length);
- }
-
- return npages;
+ return iommu_is_span_boundary(entry, nr, shift, boundary_size);
}
extern unsigned long iommu_range_alloc(struct device *dev,
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index ddca6c6..0183970 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -335,8 +335,10 @@
unsigned long flags, handle, prot;
dma_addr_t dma_next = 0, dma_addr;
unsigned int max_seg_size;
+ unsigned long seg_boundary_size;
int outcount, incount, i;
struct iommu *iommu;
+ unsigned long base_shift;
long err;
BUG_ON(direction == DMA_NONE);
@@ -362,8 +364,11 @@
iommu_batch_start(dev, prot, ~0UL);
max_seg_size = dma_get_max_seg_size(dev);
+ seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+ IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+ base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
for_each_sg(sglist, s, nelems, i) {
- unsigned long paddr, npages, entry, slen;
+ unsigned long paddr, npages, entry, out_entry = 0, slen;
slen = s->length;
/* Sanity check */
@@ -406,7 +411,9 @@
* - allocated dma_addr isn't contiguous to previous allocation
*/
if ((dma_addr != dma_next) ||
- (outs->dma_length + s->length > max_seg_size)) {
+ (outs->dma_length + s->length > max_seg_size) ||
+ (is_span_boundary(out_entry, base_shift,
+ seg_boundary_size, outs, s))) {
/* Can't merge: create a new segment */
segstart = s;
outcount++;
@@ -420,6 +427,7 @@
/* This is a new segment, fill entries */
outs->dma_address = dma_addr;
outs->dma_length = slen;
+ out_entry = entry;
}
/* Calculate next page pointer for contiguous check */
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index aaae865..e9fc0aa 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -114,6 +114,85 @@
preempt_enable();
}
+static int get_from_target(struct task_struct *target, unsigned long uaddr,
+ void *kbuf, int len)
+{
+ if (target == current) {
+ if (copy_from_user(kbuf, (void __user *) uaddr, len))
+ return -EFAULT;
+ } else {
+ int len2 = access_process_vm(target, uaddr, kbuf, len, 0);
+ if (len2 != len)
+ return -EFAULT;
+ }
+ return 0;
+}
+
+static int set_to_target(struct task_struct *target, unsigned long uaddr,
+ void *kbuf, int len)
+{
+ if (target == current) {
+ if (copy_to_user((void __user *) uaddr, kbuf, len))
+ return -EFAULT;
+ } else {
+ int len2 = access_process_vm(target, uaddr, kbuf, len, 1);
+ if (len2 != len)
+ return -EFAULT;
+ }
+ return 0;
+}
+
+static int regwindow64_get(struct task_struct *target,
+ const struct pt_regs *regs,
+ struct reg_window *wbuf)
+{
+ unsigned long rw_addr = regs->u_regs[UREG_I6];
+
+ if (test_tsk_thread_flag(current, TIF_32BIT)) {
+ struct reg_window32 win32;
+ int i;
+
+ if (get_from_target(target, rw_addr, &win32, sizeof(win32)))
+ return -EFAULT;
+ for (i = 0; i < 8; i++)
+ wbuf->locals[i] = win32.locals[i];
+ for (i = 0; i < 8; i++)
+ wbuf->ins[i] = win32.ins[i];
+ } else {
+ rw_addr += STACK_BIAS;
+ if (get_from_target(target, rw_addr, wbuf, sizeof(*wbuf)))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int regwindow64_set(struct task_struct *target,
+ const struct pt_regs *regs,
+ struct reg_window *wbuf)
+{
+ unsigned long rw_addr = regs->u_regs[UREG_I6];
+
+ if (test_tsk_thread_flag(current, TIF_32BIT)) {
+ struct reg_window32 win32;
+ int i;
+
+ for (i = 0; i < 8; i++)
+ win32.locals[i] = wbuf->locals[i];
+ for (i = 0; i < 8; i++)
+ win32.ins[i] = wbuf->ins[i];
+
+ if (set_to_target(target, rw_addr, &win32, sizeof(win32)))
+ return -EFAULT;
+ } else {
+ rw_addr += STACK_BIAS;
+ if (set_to_target(target, rw_addr, wbuf, sizeof(*wbuf)))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
enum sparc_regset {
REGSET_GENERAL,
REGSET_FP,
@@ -133,16 +212,13 @@
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
regs->u_regs,
0, 16 * sizeof(u64));
- if (!ret) {
- unsigned long __user *reg_window = (unsigned long __user *)
- (regs->u_regs[UREG_I6] + STACK_BIAS);
- unsigned long window[16];
+ if (!ret && count && pos < (32 * sizeof(u64))) {
+ struct reg_window window;
- if (copy_from_user(window, reg_window, sizeof(window)))
+ if (regwindow64_get(target, regs, &window))
return -EFAULT;
-
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- window,
+ &window,
16 * sizeof(u64),
32 * sizeof(u64));
}
@@ -164,10 +240,11 @@
36 * sizeof(u64));
}
- if (!ret)
+ if (!ret) {
ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
36 * sizeof(u64), -1);
+ }
return ret;
}
@@ -185,20 +262,19 @@
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
regs->u_regs,
0, 16 * sizeof(u64));
- if (!ret && count > 0) {
- unsigned long __user *reg_window = (unsigned long __user *)
- (regs->u_regs[UREG_I6] + STACK_BIAS);
- unsigned long window[16];
+ if (!ret && count && pos < (32 * sizeof(u64))) {
+ struct reg_window window;
- if (copy_from_user(window, reg_window, sizeof(window)))
+ if (regwindow64_get(target, regs, &window))
return -EFAULT;
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- window,
+ &window,
16 * sizeof(u64),
32 * sizeof(u64));
+
if (!ret &&
- copy_to_user(reg_window, window, sizeof(window)))
+ regwindow64_set(target, regs, &window))
return -EFAULT;
}
@@ -412,9 +488,22 @@
*k++ = regs->u_regs[pos++];
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
- for (; count > 0 && pos < 32; count--) {
- if (get_user(*k++, ®_window[pos++]))
- return -EFAULT;
+ if (target == current) {
+ for (; count > 0 && pos < 32; count--) {
+ if (get_user(*k++, ®_window[pos++]))
+ return -EFAULT;
+ }
+ } else {
+ for (; count > 0 && pos < 32; count--) {
+ if (access_process_vm(target,
+ (unsigned long)
+ ®_window[pos],
+ k, sizeof(*k), 0)
+ != sizeof(*k))
+ return -EFAULT;
+ k++;
+ pos++;
+ }
}
} else {
for (; count > 0 && pos < 16; count--) {
@@ -423,10 +512,28 @@
}
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
- for (; count > 0 && pos < 32; count--) {
- if (get_user(reg, ®_window[pos++]) ||
- put_user(reg, u++))
- return -EFAULT;
+ if (target == current) {
+ for (; count > 0 && pos < 32; count--) {
+ if (get_user(reg, ®_window[pos++]) ||
+ put_user(reg, u++))
+ return -EFAULT;
+ }
+ } else {
+ for (; count > 0 && pos < 32; count--) {
+ if (access_process_vm(target,
+ (unsigned long)
+ ®_window[pos],
+ ®, sizeof(reg), 0)
+ != sizeof(reg))
+ return -EFAULT;
+ if (access_process_vm(target,
+ (unsigned long) u,
+ ®, sizeof(reg), 1)
+ != sizeof(reg))
+ return -EFAULT;
+ pos++;
+ u++;
+ }
}
}
while (count > 0) {
@@ -488,9 +595,23 @@
regs->u_regs[pos++] = *k++;
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
- for (; count > 0 && pos < 32; count--) {
- if (put_user(*k++, ®_window[pos++]))
- return -EFAULT;
+ if (target == current) {
+ for (; count > 0 && pos < 32; count--) {
+ if (put_user(*k++, ®_window[pos++]))
+ return -EFAULT;
+ }
+ } else {
+ for (; count > 0 && pos < 32; count--) {
+ if (access_process_vm(target,
+ (unsigned long)
+ ®_window[pos],
+ (void *) k,
+ sizeof(*k), 1)
+ != sizeof(*k))
+ return -EFAULT;
+ k++;
+ pos++;
+ }
}
} else {
for (; count > 0 && pos < 16; count--) {
@@ -500,10 +621,29 @@
}
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
- for (; count > 0 && pos < 32; count--) {
- if (get_user(reg, u++) ||
- put_user(reg, ®_window[pos++]))
- return -EFAULT;
+ if (target == current) {
+ for (; count > 0 && pos < 32; count--) {
+ if (get_user(reg, u++) ||
+ put_user(reg, ®_window[pos++]))
+ return -EFAULT;
+ }
+ } else {
+ for (; count > 0 && pos < 32; count--) {
+ if (access_process_vm(target,
+ (unsigned long)
+ u,
+ ®, sizeof(reg), 0)
+ != sizeof(reg))
+ return -EFAULT;
+ if (access_process_vm(target,
+ (unsigned long)
+ ®_window[pos],
+ ®, sizeof(reg), 1)
+ != sizeof(reg))
+ return -EFAULT;
+ pos++;
+ u++;
+ }
}
}
while (count > 0) {
@@ -711,7 +851,7 @@
long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t caddr, compat_ulong_t cdata)
{
- const struct user_regset_view *view = task_user_regset_view(child);
+ const struct user_regset_view *view = task_user_regset_view(current);
compat_ulong_t caddr2 = task_pt_regs(current)->u_regs[UREG_I4];
struct pt_regs32 __user *pregs;
struct compat_fps __user *fps;
@@ -819,7 +959,7 @@
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- const struct user_regset_view *view = task_user_regset_view(child);
+ const struct user_regset_view *view = task_user_regset_view(current);
unsigned long addr2 = task_pt_regs(current)->u_regs[UREG_I4];
struct pt_regs __user *pregs;
struct fps __user *fps;
diff --git a/arch/sparc64/kernel/semaphore.c b/arch/sparc64/kernel/semaphore.c
deleted file mode 100644
index 9974a68..0000000
--- a/arch/sparc64/kernel/semaphore.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/* semaphore.c: Sparc64 semaphore implementation.
- *
- * This is basically the PPC semaphore scheme ported to use
- * the sparc64 atomic instructions, so see the PPC code for
- * credits.
- */
-
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-/*
- * Atomically update sem->count.
- * This does the equivalent of the following:
- *
- * old_count = sem->count;
- * tmp = MAX(old_count, 0) + incr;
- * sem->count = tmp;
- * return old_count;
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
- int old_count, tmp;
-
- __asm__ __volatile__("\n"
-" ! __sem_update_count old_count(%0) tmp(%1) incr(%4) &sem->count(%3)\n"
-"1: ldsw [%3], %0\n"
-" mov %0, %1\n"
-" cmp %0, 0\n"
-" movl %%icc, 0, %1\n"
-" add %1, %4, %1\n"
-" cas [%3], %0, %1\n"
-" cmp %0, %1\n"
-" membar #StoreLoad | #StoreStore\n"
-" bne,pn %%icc, 1b\n"
-" nop\n"
- : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
- : "r" (&sem->count), "r" (incr), "m" (sem->count)
- : "cc");
-
- return old_count;
-}
-
-static void __up(struct semaphore *sem)
-{
- __sem_update_count(sem, 1);
- wake_up(&sem->wait);
-}
-
-void up(struct semaphore *sem)
-{
- /* This atomically does:
- * old_val = sem->count;
- * new_val = sem->count + 1;
- * sem->count = new_val;
- * if (old_val < 0)
- * __up(sem);
- *
- * The (old_val < 0) test is equivalent to
- * the more straightforward (new_val <= 0),
- * but it is easier to test the former because
- * of how the CAS instruction works.
- */
-
- __asm__ __volatile__("\n"
-" ! up sem(%0)\n"
-" membar #StoreLoad | #LoadLoad\n"
-"1: lduw [%0], %%g1\n"
-" add %%g1, 1, %%g7\n"
-" cas [%0], %%g1, %%g7\n"
-" cmp %%g1, %%g7\n"
-" bne,pn %%icc, 1b\n"
-" addcc %%g7, 1, %%g0\n"
-" membar #StoreLoad | #StoreStore\n"
-" ble,pn %%icc, 3f\n"
-" nop\n"
-"2:\n"
-" .subsection 2\n"
-"3: mov %0, %%g1\n"
-" save %%sp, -160, %%sp\n"
-" call %1\n"
-" mov %%g1, %%o0\n"
-" ba,pt %%xcc, 2b\n"
-" restore\n"
-" .previous\n"
- : : "r" (sem), "i" (__up)
- : "g1", "g2", "g3", "g7", "memory", "cc");
-}
-
-static void __sched __down(struct semaphore * sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
- tsk->state = TASK_UNINTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- while (__sem_update_count(sem, -1) <= 0) {
- schedule();
- tsk->state = TASK_UNINTERRUPTIBLE;
- }
- remove_wait_queue(&sem->wait, &wait);
- tsk->state = TASK_RUNNING;
-
- wake_up(&sem->wait);
-}
-
-void __sched down(struct semaphore *sem)
-{
- might_sleep();
- /* This atomically does:
- * old_val = sem->count;
- * new_val = sem->count - 1;
- * sem->count = new_val;
- * if (old_val < 1)
- * __down(sem);
- *
- * The (old_val < 1) test is equivalent to
- * the more straightforward (new_val < 0),
- * but it is easier to test the former because
- * of how the CAS instruction works.
- */
-
- __asm__ __volatile__("\n"
-" ! down sem(%0)\n"
-"1: lduw [%0], %%g1\n"
-" sub %%g1, 1, %%g7\n"
-" cas [%0], %%g1, %%g7\n"
-" cmp %%g1, %%g7\n"
-" bne,pn %%icc, 1b\n"
-" cmp %%g7, 1\n"
-" membar #StoreLoad | #StoreStore\n"
-" bl,pn %%icc, 3f\n"
-" nop\n"
-"2:\n"
-" .subsection 2\n"
-"3: mov %0, %%g1\n"
-" save %%sp, -160, %%sp\n"
-" call %1\n"
-" mov %%g1, %%o0\n"
-" ba,pt %%xcc, 2b\n"
-" restore\n"
-" .previous\n"
- : : "r" (sem), "i" (__down)
- : "g1", "g2", "g3", "g7", "memory", "cc");
-}
-
-int down_trylock(struct semaphore *sem)
-{
- int ret;
-
- /* This atomically does:
- * old_val = sem->count;
- * new_val = sem->count - 1;
- * if (old_val < 1) {
- * ret = 1;
- * } else {
- * sem->count = new_val;
- * ret = 0;
- * }
- *
- * The (old_val < 1) test is equivalent to
- * the more straightforward (new_val < 0),
- * but it is easier to test the former because
- * of how the CAS instruction works.
- */
-
- __asm__ __volatile__("\n"
-" ! down_trylock sem(%1) ret(%0)\n"
-"1: lduw [%1], %%g1\n"
-" sub %%g1, 1, %%g7\n"
-" cmp %%g1, 1\n"
-" bl,pn %%icc, 2f\n"
-" mov 1, %0\n"
-" cas [%1], %%g1, %%g7\n"
-" cmp %%g1, %%g7\n"
-" bne,pn %%icc, 1b\n"
-" mov 0, %0\n"
-" membar #StoreLoad | #StoreStore\n"
-"2:\n"
- : "=&r" (ret)
- : "r" (sem)
- : "g1", "g7", "memory", "cc");
-
- return ret;
-}
-
-static int __sched __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
-
- tsk->state = TASK_INTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- while (__sem_update_count(sem, -1) <= 0) {
- if (signal_pending(current)) {
- __sem_update_count(sem, 0);
- retval = -EINTR;
- break;
- }
- schedule();
- tsk->state = TASK_INTERRUPTIBLE;
- }
- tsk->state = TASK_RUNNING;
- remove_wait_queue(&sem->wait, &wait);
- wake_up(&sem->wait);
- return retval;
-}
-
-int __sched down_interruptible(struct semaphore *sem)
-{
- int ret = 0;
-
- might_sleep();
- /* This atomically does:
- * old_val = sem->count;
- * new_val = sem->count - 1;
- * sem->count = new_val;
- * if (old_val < 1)
- * ret = __down_interruptible(sem);
- *
- * The (old_val < 1) test is equivalent to
- * the more straightforward (new_val < 0),
- * but it is easier to test the former because
- * of how the CAS instruction works.
- */
-
- __asm__ __volatile__("\n"
-" ! down_interruptible sem(%2) ret(%0)\n"
-"1: lduw [%2], %%g1\n"
-" sub %%g1, 1, %%g7\n"
-" cas [%2], %%g1, %%g7\n"
-" cmp %%g1, %%g7\n"
-" bne,pn %%icc, 1b\n"
-" cmp %%g7, 1\n"
-" membar #StoreLoad | #StoreStore\n"
-" bl,pn %%icc, 3f\n"
-" nop\n"
-"2:\n"
-" .subsection 2\n"
-"3: mov %2, %%g1\n"
-" save %%sp, -160, %%sp\n"
-" call %3\n"
-" mov %%g1, %%o0\n"
-" ba,pt %%xcc, 2b\n"
-" restore\n"
-" .previous\n"
- : "=r" (ret)
- : "0" (ret), "r" (sem), "i" (__down_interruptible)
- : "g1", "g2", "g3", "g7", "memory", "cc");
- return ret;
-}
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index 94a9d64..9d51956 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -357,7 +357,7 @@
static inline int
save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
{
- unsigned long *fpregs = (unsigned long *)(regs+1);
+ unsigned long *fpregs = current_thread_info()->fpregs;
unsigned long fprs;
int err = 0;
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 51fa773..051b8d9 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -130,12 +130,6 @@
EXPORT_SYMBOL(sparc64_get_clock_tick);
-/* semaphores */
-EXPORT_SYMBOL(down);
-EXPORT_SYMBOL(down_trylock);
-EXPORT_SYMBOL(down_interruptible);
-EXPORT_SYMBOL(up);
-
/* RW semaphores */
EXPORT_SYMBOL(__down_read);
EXPORT_SYMBOL(__down_read_trylock);
diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c
index a0f000b..ae24919 100644
--- a/arch/sparc64/mm/tlb.c
+++ b/arch/sparc64/mm/tlb.c
@@ -23,11 +23,8 @@
void flush_tlb_pending(void)
{
- struct mmu_gather *mp;
+ struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
- preempt_disable();
-
- mp = &__get_cpu_var(mmu_gathers);
if (mp->tlb_nr) {
flush_tsb_user(mp);
@@ -43,7 +40,7 @@
mp->tlb_nr = 0;
}
- preempt_enable();
+ put_cpu_var(mmu_gathers);
}
void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig)
diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386
index 3cd8a04..e09edfa 100644
--- a/arch/um/Kconfig.i386
+++ b/arch/um/Kconfig.i386
@@ -19,10 +19,6 @@
bool
default n
-config SEMAPHORE_SLEEPERS
- bool
- default y
-
config 3_LEVEL_PGTABLES
bool "Three-level pagetables (EXPERIMENTAL)"
default n
diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64
index 6533b34..3fbe69e 100644
--- a/arch/um/Kconfig.x86_64
+++ b/arch/um/Kconfig.x86_64
@@ -11,10 +11,6 @@
bool
default y
-config SEMAPHORE_SLEEPERS
- bool
- default y
-
config 3_LEVEL_PGTABLES
bool
default y
diff --git a/arch/um/sys-i386/ksyms.c b/arch/um/sys-i386/ksyms.c
index 2a1eac1..bfbefd3 100644
--- a/arch/um/sys-i386/ksyms.c
+++ b/arch/um/sys-i386/ksyms.c
@@ -1,17 +1,5 @@
#include "linux/module.h"
-#include "linux/in6.h"
-#include "linux/rwsem.h"
-#include "asm/byteorder.h"
-#include "asm/delay.h"
-#include "asm/semaphore.h"
-#include "asm/uaccess.h"
#include "asm/checksum.h"
-#include "asm/errno.h"
-
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
/* Networking helper routines. */
EXPORT_SYMBOL(csum_partial);
diff --git a/arch/um/sys-ppc/Makefile b/arch/um/sys-ppc/Makefile
index 0890152..b8bc844 100644
--- a/arch/um/sys-ppc/Makefile
+++ b/arch/um/sys-ppc/Makefile
@@ -3,7 +3,7 @@
.S.o:
$(CC) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o
-OBJS = ptrace.o sigcontext.o semaphore.o checksum.o miscthings.o misc.o \
+OBJS = ptrace.o sigcontext.o checksum.o miscthings.o misc.o \
ptrace_user.o sysrq.o
EXTRA_AFLAGS := -DCONFIG_PPC32 -I. -I$(srctree)/arch/ppc/kernel
@@ -20,10 +20,6 @@
sigcontext.o: sigcontext.c
$(CC) $(USER_CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
-semaphore.c:
- rm -f $@
- ln -s $(srctree)/arch/ppc/kernel/$@ $@
-
checksum.S:
rm -f $@
ln -s $(srctree)/arch/ppc/lib/$@ $@
@@ -66,4 +62,4 @@
$(CC) $(EXTRA_AFLAGS) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o
rm -f asm
-clean-files := $(OBJS) ppc_defs.h checksum.S semaphore.c mk_defs.c
+clean-files := $(OBJS) ppc_defs.h checksum.S mk_defs.c
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c
index 12c5936..4d7d1a8 100644
--- a/arch/um/sys-x86_64/ksyms.c
+++ b/arch/um/sys-x86_64/ksyms.c
@@ -1,16 +1,5 @@
#include "linux/module.h"
-#include "linux/in6.h"
-#include "linux/rwsem.h"
-#include "asm/byteorder.h"
-#include "asm/semaphore.h"
-#include "asm/uaccess.h"
-#include "asm/checksum.h"
-#include "asm/errno.h"
-
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
+#include "asm/string.h"
/*XXX: we need them because they would be exported by x86_64 */
EXPORT_SYMBOL(__memcpy);
diff --git a/arch/v850/kernel/Makefile b/arch/v850/kernel/Makefile
index 3930482..da5889c 100644
--- a/arch/v850/kernel/Makefile
+++ b/arch/v850/kernel/Makefile
@@ -11,7 +11,7 @@
extra-y := head.o init_task.o vmlinux.lds
-obj-y += intv.o entry.o process.o syscalls.o time.o semaphore.o setup.o \
+obj-y += intv.o entry.o process.o syscalls.o time.o setup.o \
signal.o irq.o mach.o ptrace.o bug.o
obj-$(CONFIG_MODULES) += module.o v850_ksyms.o
# chip-specific code
diff --git a/arch/v850/kernel/semaphore.c b/arch/v850/kernel/semaphore.c
deleted file mode 100644
index fc89fd6..0000000
--- a/arch/v850/kernel/semaphore.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * arch/v850/kernel/semaphore.c -- Semaphore support
- *
- * Copyright (C) 1998-2000 IBM Corporation
- * Copyright (C) 1999 Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file is a copy of the s390 version, arch/s390/kernel/semaphore.c
- * Author(s): Martin Schwidefsky
- * which was derived from the i386 version, linux/arch/i386/kernel/semaphore.c
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-
-#include <asm/semaphore.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is
- * protected by the semaphore spinlock.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- * - only on a boundary condition do we need to care. When we go
- * from a negative count to a non-negative, we wake people up.
- * - when we go from a non-negative count to a negative do we
- * (a) synchronize with the "sleeper" count and (b) make sure
- * that we're on the wakeup list before we synchronize so that
- * we cannot lose wakeup events.
- */
-
-void __up(struct semaphore *sem)
-{
- wake_up(&sem->wait);
-}
-
-static DEFINE_SPINLOCK(semaphore_lock);
-
-void __sched __down(struct semaphore * sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- tsk->state = TASK_UNINTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- spin_lock_irq(&semaphore_lock);
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irq(&semaphore_lock);
-
- schedule();
- tsk->state = TASK_UNINTERRUPTIBLE;
- spin_lock_irq(&semaphore_lock);
- }
- spin_unlock_irq(&semaphore_lock);
- remove_wait_queue(&sem->wait, &wait);
- tsk->state = TASK_RUNNING;
- wake_up(&sem->wait);
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- tsk->state = TASK_INTERRUPTIBLE;
- add_wait_queue_exclusive(&sem->wait, &wait);
-
- spin_lock_irq(&semaphore_lock);
- sem->sleepers ++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * With signals pending, this turns into
- * the trylock failure case - we won't be
- * sleeping, and we* can't get the lock as
- * it has contention. Just correct the count
- * and exit.
- */
- if (signal_pending(current)) {
- retval = -EINTR;
- sem->sleepers = 0;
- atomic_add(sleepers, &sem->count);
- break;
- }
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock. The
- * "-1" is because we're still hoping to get
- * the lock.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irq(&semaphore_lock);
-
- schedule();
- tsk->state = TASK_INTERRUPTIBLE;
- spin_lock_irq(&semaphore_lock);
- }
- spin_unlock_irq(&semaphore_lock);
- tsk->state = TASK_RUNNING;
- remove_wait_queue(&sem->wait, &wait);
- wake_up(&sem->wait);
- return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- */
-int __down_trylock(struct semaphore * sem)
-{
- unsigned long flags;
- int sleepers;
-
- spin_lock_irqsave(&semaphore_lock, flags);
- sleepers = sem->sleepers + 1;
- sem->sleepers = 0;
-
- /*
- * Add "everybody else" and us into it. They aren't
- * playing, because we own the spinlock.
- */
- if (!atomic_add_negative(sleepers, &sem->count))
- wake_up(&sem->wait);
-
- spin_unlock_irqrestore(&semaphore_lock, flags);
- return 1;
-}
diff --git a/arch/v850/kernel/v850_ksyms.c b/arch/v850/kernel/v850_ksyms.c
index 93575fd..8d386a5 100644
--- a/arch/v850/kernel/v850_ksyms.c
+++ b/arch/v850/kernel/v850_ksyms.c
@@ -11,7 +11,6 @@
#include <asm/pgalloc.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/semaphore.h>
#include <asm/checksum.h>
#include <asm/current.h>
@@ -34,12 +33,6 @@
EXPORT_SYMBOL (memcpy);
EXPORT_SYMBOL (memmove);
-/* semaphores */
-EXPORT_SYMBOL (__down);
-EXPORT_SYMBOL (__down_interruptible);
-EXPORT_SYMBOL (__down_trylock);
-EXPORT_SYMBOL (__up);
-
/*
* libgcc functions - functions that are used internally by the
* compiler... (prototypes are not correct though, but that
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6c70fed..2a59dbb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -23,6 +23,7 @@
select HAVE_KPROBES
select HAVE_KRETPROBES
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
+ select HAVE_ARCH_KGDB
config GENERIC_LOCKBREAK
@@ -53,9 +54,6 @@
config HAVE_LATENCYTOP_SUPPORT
def_bool y
-config SEMAPHORE_SLEEPERS
- def_bool y
-
config FAST_CMPXCHG_LOCAL
bool
default y
@@ -117,7 +115,7 @@
def_bool y
config HAVE_SETUP_PER_CPU_AREA
- def_bool X86_64
+ def_bool X86_64 || (X86_SMP && !X86_VOYAGER)
config ARCH_HIBERNATION_POSSIBLE
def_bool y
@@ -171,7 +169,7 @@
config X86_HT
bool
depends on SMP
- depends on (X86_32 && !(X86_VISWS || X86_VOYAGER)) || (X86_64 && !MK8)
+ depends on (X86_32 && !(X86_VISWS || X86_VOYAGER)) || X86_64
default y
config X86_BIOS_REBOOT
@@ -181,7 +179,7 @@
config X86_TRAMPOLINE
bool
- depends on X86_SMP || (X86_VOYAGER && SMP)
+ depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP)
default y
config KTIME_SCALAR
@@ -241,8 +239,7 @@
config X86_VOYAGER
bool "Voyager (NCR)"
- depends on X86_32
- select SMP if !BROKEN
+ depends on X86_32 && (SMP || BROKEN)
help
Voyager is an MCA-based 32-way capable SMP architecture proprietary
to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based.
@@ -254,9 +251,8 @@
config X86_NUMAQ
bool "NUMAQ (IBM/Sequent)"
- select SMP
+ depends on SMP && X86_32
select NUMA
- depends on X86_32
help
This option is used for getting Linux to run on a (IBM/Sequent) NUMA
multiquad box. This changes the way that processors are bootstrapped,
@@ -327,8 +323,9 @@
config X86_VSMP
bool "Support for ScaleMP vSMP"
- depends on X86_64 && PCI
- help
+ select PARAVIRT
+ depends on X86_64
+ help
Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
supposed to run on these EM64T-based machines. Only choose this option
if you have one of these machines.
@@ -383,6 +380,35 @@
endif
+config MEMTEST_BOOTPARAM
+ bool "Memtest boot parameter"
+ depends on X86_64
+ default y
+ help
+ This option adds a kernel parameter 'memtest', which allows memtest
+ to be disabled at boot. If this option is selected, memtest
+ functionality can be disabled with memtest=0 on the kernel
+ command line. The purpose of this option is to allow a single
+ kernel image to be distributed with memtest built in, but not
+ necessarily enabled.
+
+ If you are unsure how to answer this question, answer Y.
+
+config MEMTEST_BOOTPARAM_VALUE
+ int "Memtest boot parameter default value (0-4)"
+ depends on MEMTEST_BOOTPARAM
+ range 0 4
+ default 0
+ help
+ This option sets the default value for the kernel parameter
+ 'memtest', which allows memtest to be disabled at boot. If this
+ option is set to 0 (zero), the memtest kernel parameter will
+ default to 0, disabling memtest at bootup. If this option is
+ set to 4, the memtest kernel parameter will default to 4,
+ enabling memtest at bootup, and use that as pattern number.
+
+ If you are unsure how to answer this question, answer 0.
+
config ACPI_SRAT
def_bool y
depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
@@ -507,7 +533,7 @@
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
- depends on (X86_64 && SMP) || (X86_32 && X86_HT)
+ depends on X86_HT
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with Intel Pentium 4 chips with HyperThreading at a
@@ -517,7 +543,7 @@
config SCHED_MC
def_bool y
prompt "Multi-core scheduler support"
- depends on (X86_64 && SMP) || (X86_32 && X86_HT)
+ depends on X86_HT
help
Multi-core scheduler support improves the CPU scheduler's decision
making when dealing with multi-core CPU chips at a cost of slightly
@@ -886,7 +912,7 @@
number of nodes. This is only useful for debugging.
config NODES_SHIFT
- int
+ int "Max num nodes shift(1-15)"
range 1 15 if X86_64
default "6" if X86_64
default "4" if X86_NUMAQ
@@ -1010,6 +1036,21 @@
See <file:Documentation/mtrr.txt> for more information.
+config X86_PAT
+ def_bool y
+ prompt "x86 PAT support"
+ depends on MTRR && NONPROMISC_DEVMEM
+ help
+ Use PAT attributes to setup page level cache control.
+
+ PATs are the modern equivalents of MTRRs and are much more
+ flexible than MTRRs.
+
+ Say N here if you see bootup problems (boot crash, boot hang,
+ spontaneous reboots) or a non-working video driver.
+
+ If unsure, say Y.
+
config EFI
def_bool n
prompt "EFI runtime service support"
@@ -1078,6 +1119,7 @@
config KEXEC
bool "kexec system call"
+ depends on X86_64 || X86_BIOS_REBOOT
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
@@ -1379,7 +1421,7 @@
menu "Bus options (PCI etc.)"
config PCI
- bool "PCI support" if !X86_VISWS
+ bool "PCI support" if !X86_VISWS && !X86_VSMP
depends on !X86_VOYAGER
default y
select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 9304bfb..57072f2 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -388,7 +388,7 @@
#
config X86_P6_NOP
def_bool y
- depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4)
+ depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
config X86_TSC
def_bool y
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 702eb39..610aaec 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -54,6 +54,18 @@
Say N if unsure.
+config X86_PTDUMP
+ bool "Export kernel pagetable layout to userspace via debugfs"
+ depends on DEBUG_KERNEL
+ select DEBUG_FS
+ help
+ Say Y here if you want to show the kernel pagetable layout in a
+ debugfs file. This information is only useful for kernel developers
+ who are working in architecture specific areas of the kernel.
+ It is probably not a good idea to enable this feature in a production
+ kernel.
+ If in doubt, say "N"
+
config DEBUG_RODATA
bool "Write protect kernel read-only data structures"
default y
@@ -64,6 +76,18 @@
data. This is recommended so that we can catch kernel bugs sooner.
If in doubt, say "Y".
+config DIRECT_GBPAGES
+ bool "Enable gbpages-mapped kernel pagetables"
+ depends on DEBUG_KERNEL && EXPERIMENTAL && X86_64
+ help
+ Enable gigabyte pages support (if the CPU supports it). This can
+ improve the kernel's performance a tiny bit by reducing TLB
+ pressure.
+
+ This is experimental code.
+
+ If in doubt, say "N".
+
config DEBUG_RODATA_TEST
bool "Testcase for the DEBUG_RODATA feature"
depends on DEBUG_RODATA
@@ -82,8 +106,8 @@
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
- depends on DEBUG_KERNEL
depends on X86_32
+ default y
help
If you say Y here the kernel will use a 4Kb stacksize for the
kernel stack attached to each process/thread. This facilitates
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index f1e739a..3cff3c8 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -151,7 +151,6 @@
# 64 bit does not support subarch support - clear sub arch variables
fcore-$(CONFIG_X86_64) :=
mcore-$(CONFIG_X86_64) :=
-mflags-$(CONFIG_X86_64) :=
KBUILD_CFLAGS += $(mflags-y)
KBUILD_AFLAGS += $(mflags-y)
@@ -159,9 +158,9 @@
###
# Kernel objects
-head-y := arch/x86/kernel/head_$(BITS).o
-head-$(CONFIG_X86_64) += arch/x86/kernel/head64.o
-head-y += arch/x86/kernel/init_task.o
+head-y := arch/x86/kernel/head_$(BITS).o
+head-y += arch/x86/kernel/head$(BITS).o
+head-y += arch/x86/kernel/init_task.o
libs-y += arch/x86/lib/
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index f88458e..7ee102f 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -30,7 +30,7 @@
setup-y += a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
setup-y += header.o main.o mca.o memory.o pm.o pmjump.o
-setup-y += printf.o string.o tty.o video.o version.o
+setup-y += printf.o string.o tty.o video.o video-mode.o version.o
setup-$(CONFIG_X86_APM_BOOT) += apm.o
setup-$(CONFIG_X86_VOYAGER) += voyager.o
@@ -94,6 +94,20 @@
SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
+sed-offsets := -e 's/^00*/0/' \
+ -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p'
+
+quiet_cmd_offsets = OFFSETS $@
+ cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
+
+$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,offsets)
+
+targets += offsets.h
+
+AFLAGS_header.o += -I$(obj)
+$(obj)/header.o: $(obj)/offsets.h
+
LDFLAGS_setup.elf := -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
$(call if_changed,ld)
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index 7822a49..0957807 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -286,6 +286,11 @@
/* video.c */
void set_video(void);
+/* video-mode.c */
+int set_mode(u16 mode);
+int mode_defined(u16 mode);
+void probe_cards(int unsafe);
+
/* video-vesa.c */
void vesa_store_edid(void);
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index d2b9f3b..92fdd35 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -22,7 +22,7 @@
$(call if_changed,ld)
@:
-OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
+OBJCOPYFLAGS_vmlinux.bin := -R .comment -S
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 8182e32..dad4e69 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -15,6 +15,10 @@
* we just keep it from happening
*/
#undef CONFIG_PARAVIRT
+#ifdef CONFIG_X86_32
+#define _ASM_DESC_H_ 1
+#endif
+
#ifdef CONFIG_X86_64
#define _LINUX_STRING_H_ 1
#define __LINUX_BITMAP_H 1
@@ -22,6 +26,7 @@
#include <linux/linkage.h>
#include <linux/screen_info.h>
+#include <linux/elf.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/boot.h>
@@ -53,8 +58,8 @@
* 1 bit (last block flag)
* 2 bits (block type)
*
- * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
- * The smallest block type encoding is always used.
+ * 1 block occurs every 32K -1 bytes or when there 50% compression
+ * has been achieved. The smallest block type encoding is always used.
*
* stored:
* 32 bits length in bytes.
@@ -90,9 +95,9 @@
*
* All of which is enough to compute an amount of extra data that is required
* to be safe. To avoid problems at the block level allocating 5 extra bytes
- * per 32767 bytes of data is sufficient. To avoind problems internal to a block
- * adding an extra 32767 bytes (the worst case uncompressed block size) is
- * sufficient, to ensure that in the worst case the decompressed data for
+ * per 32767 bytes of data is sufficient. To avoind problems internal to a
+ * block adding an extra 32767 bytes (the worst case uncompressed block size)
+ * is sufficient, to ensure that in the worst case the decompressed data for
* block will stop the byte before the compressed data for a block begins.
* To avoid problems with the compressed data's meta information an extra 18
* bytes are needed. Leading to the formula:
@@ -111,58 +116,66 @@
* gzip declarations
*/
-#define OF(args) args
-#define STATIC static
+#define OF(args) args
+#define STATIC static
#undef memset
#undef memcpy
-#define memzero(s, n) memset ((s), 0, (n))
+#define memzero(s, n) memset((s), 0, (n))
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
-#define WSIZE 0x80000000 /* Window size must be at least 32k,
- * and a power of two
- * We don't actually have a window just
- * a huge output buffer so I report
- * a 2G windows size, as that should
- * always be larger than our output buffer.
- */
+/*
+ * Window size must be at least 32k, and a power of two.
+ * We don't actually have a window just a huge output buffer,
+ * so we report a 2G window size, as that should always be
+ * larger than our output buffer:
+ */
+#define WSIZE 0x80000000
-static uch *inbuf; /* input buffer */
-static uch *window; /* Sliding window buffer, (and final output buffer) */
+/* Input buffer: */
+static unsigned char *inbuf;
-static unsigned insize; /* valid bytes in inbuf */
-static unsigned inptr; /* index of next byte to be processed in inbuf */
-static unsigned outcnt; /* bytes in output buffer */
+/* Sliding window buffer (and final output buffer): */
+static unsigned char *window;
+
+/* Valid bytes in inbuf: */
+static unsigned insize;
+
+/* Index of next byte to be processed in inbuf: */
+static unsigned inptr;
+
+/* Bytes in output buffer: */
+static unsigned outcnt;
/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gz file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAM 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6, 7: reserved */
-#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
+#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
+
/* Diagnostic functions */
#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+# define Assert(cond, msg) do { if (!(cond)) error(msg); } while (0)
+# define Trace(x) do { fprintf x; } while (0)
+# define Tracev(x) do { if (verbose) fprintf x ; } while (0)
+# define Tracevv(x) do { if (verbose > 1) fprintf x ; } while (0)
+# define Tracec(c, x) do { if (verbose && (c)) fprintf x ; } while (0)
+# define Tracecv(c, x) do { if (verbose > 1 && (c)) fprintf x ; } while (0)
#else
-# define Assert(cond,msg)
+# define Assert(cond, msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
+# define Tracec(c, x)
+# define Tracecv(c, x)
#endif
static int fill_inbuf(void);
@@ -170,7 +183,7 @@
static void error(char *m);
static void gzip_mark(void **);
static void gzip_release(void **);
-
+
/*
* This is set up by the setup-routine at boot-time
*/
@@ -185,7 +198,7 @@
extern unsigned char input_data[];
extern int input_len;
-static long bytes_out = 0;
+static long bytes_out;
static void *malloc(int size);
static void free(void *where);
@@ -210,7 +223,7 @@
#define HEAP_SIZE 0x4000
#endif
-static char *vidmem = (char *)0xb8000;
+static char *vidmem;
static int vidport;
static int lines, cols;
@@ -224,8 +237,10 @@
{
void *p;
- if (size <0) error("Malloc error");
- if (free_mem_ptr <= 0) error("Memory error");
+ if (size < 0)
+ error("Malloc error");
+ if (free_mem_ptr <= 0)
+ error("Memory error");
free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
@@ -251,19 +266,19 @@
{
free_mem_ptr = (memptr) *ptr;
}
-
+
static void scroll(void)
{
int i;
- memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
- for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
+ memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
+ for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
vidmem[i] = ' ';
}
static void putstr(const char *s)
{
- int x,y,pos;
+ int x, y, pos;
char c;
#ifdef CONFIG_X86_32
@@ -274,18 +289,18 @@
x = RM_SCREEN_INFO.orig_x;
y = RM_SCREEN_INFO.orig_y;
- while ( ( c = *s++ ) != '\0' ) {
- if ( c == '\n' ) {
+ while ((c = *s++) != '\0') {
+ if (c == '\n') {
x = 0;
- if ( ++y >= lines ) {
+ if (++y >= lines) {
scroll();
y--;
}
} else {
vidmem [(x + cols * y) * 2] = c;
- if ( ++x >= cols ) {
+ if (++x >= cols) {
x = 0;
- if ( ++y >= lines ) {
+ if (++y >= lines) {
scroll();
y--;
}
@@ -303,22 +318,22 @@
outb(0xff & (pos >> 1), vidport+1);
}
-static void* memset(void* s, int c, unsigned n)
+static void *memset(void *s, int c, unsigned n)
{
int i;
char *ss = s;
- for (i=0;i<n;i++) ss[i] = c;
+ for (i = 0; i < n; i++) ss[i] = c;
return s;
}
-static void* memcpy(void* dest, const void* src, unsigned n)
+static void *memcpy(void *dest, const void *src, unsigned n)
{
int i;
const char *s = src;
char *d = dest;
- for (i=0;i<n;i++) d[i] = s[i];
+ for (i = 0; i < n; i++) d[i] = s[i];
return dest;
}
@@ -341,9 +356,9 @@
/* With my window equal to my output buffer
* I only need to compute the crc here.
*/
- ulg c = crc; /* temporary variable */
+ unsigned long c = crc; /* temporary variable */
unsigned n;
- uch *in, ch;
+ unsigned char *in, ch;
in = window;
for (n = 0; n < outcnt; n++) {
@@ -351,7 +366,7 @@
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
- bytes_out += (ulg)outcnt;
+ bytes_out += (unsigned long)outcnt;
outcnt = 0;
}
@@ -365,9 +380,59 @@
asm("hlt");
}
+static void parse_elf(void *output)
+{
+#ifdef CONFIG_X86_64
+ Elf64_Ehdr ehdr;
+ Elf64_Phdr *phdrs, *phdr;
+#else
+ Elf32_Ehdr ehdr;
+ Elf32_Phdr *phdrs, *phdr;
+#endif
+ void *dest;
+ int i;
+
+ memcpy(&ehdr, output, sizeof(ehdr));
+ if (ehdr.e_ident[EI_MAG0] != ELFMAG0 ||
+ ehdr.e_ident[EI_MAG1] != ELFMAG1 ||
+ ehdr.e_ident[EI_MAG2] != ELFMAG2 ||
+ ehdr.e_ident[EI_MAG3] != ELFMAG3) {
+ error("Kernel is not a valid ELF file");
+ return;
+ }
+
+ putstr("Parsing ELF... ");
+
+ phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
+ if (!phdrs)
+ error("Failed to allocate space for phdrs");
+
+ memcpy(phdrs, output + ehdr.e_phoff, sizeof(*phdrs) * ehdr.e_phnum);
+
+ for (i = 0; i < ehdr.e_phnum; i++) {
+ phdr = &phdrs[i];
+
+ switch (phdr->p_type) {
+ case PT_LOAD:
+#ifdef CONFIG_RELOCATABLE
+ dest = output;
+ dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);
+#else
+ dest = (void *)(phdr->p_paddr);
+#endif
+ memcpy(dest,
+ output + phdr->p_offset,
+ phdr->p_filesz);
+ break;
+ default: /* Ignore other PT_* */ break;
+ }
+ }
+}
+
asmlinkage void decompress_kernel(void *rmode, memptr heap,
- uch *input_data, unsigned long input_len,
- uch *output)
+ unsigned char *input_data,
+ unsigned long input_len,
+ unsigned char *output)
{
real_mode = rmode;
@@ -390,12 +455,12 @@
inptr = 0;
#ifdef CONFIG_X86_64
- if ((ulg)output & (__KERNEL_ALIGN - 1))
+ if ((unsigned long)output & (__KERNEL_ALIGN - 1))
error("Destination address not 2M aligned");
- if ((ulg)output >= 0xffffffffffUL)
+ if ((unsigned long)output >= 0xffffffffffUL)
error("Destination address too large");
#else
- if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1))
+ if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1))
error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
error("Destination address too large");
@@ -408,6 +473,7 @@
makecrc();
putstr("\nDecompressing Linux... ");
gunzip();
+ parse_elf(output);
putstr("done.\nBooting the kernel.\n");
return;
}
diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index 769065b..2462c88 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -56,27 +56,27 @@
REQUIRED_MASK7,
};
-#define A32(a,b,c,d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
+#define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
static int is_amd(void)
{
- return cpu_vendor[0] == A32('A','u','t','h') &&
- cpu_vendor[1] == A32('e','n','t','i') &&
- cpu_vendor[2] == A32('c','A','M','D');
+ return cpu_vendor[0] == A32('A', 'u', 't', 'h') &&
+ cpu_vendor[1] == A32('e', 'n', 't', 'i') &&
+ cpu_vendor[2] == A32('c', 'A', 'M', 'D');
}
static int is_centaur(void)
{
- return cpu_vendor[0] == A32('C','e','n','t') &&
- cpu_vendor[1] == A32('a','u','r','H') &&
- cpu_vendor[2] == A32('a','u','l','s');
+ return cpu_vendor[0] == A32('C', 'e', 'n', 't') &&
+ cpu_vendor[1] == A32('a', 'u', 'r', 'H') &&
+ cpu_vendor[2] == A32('a', 'u', 'l', 's');
}
static int is_transmeta(void)
{
- return cpu_vendor[0] == A32('G','e','n','u') &&
- cpu_vendor[1] == A32('i','n','e','T') &&
- cpu_vendor[2] == A32('M','x','8','6');
+ return cpu_vendor[0] == A32('G', 'e', 'n', 'u') &&
+ cpu_vendor[1] == A32('i', 'n', 'e', 'T') &&
+ cpu_vendor[2] == A32('M', 'x', '8', '6');
}
static int has_fpu(void)
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 64ad901..6d2df8d 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -22,6 +22,7 @@
#include <asm/page.h>
#include <asm/setup.h>
#include "boot.h"
+#include "offsets.h"
SETUPSECTS = 4 /* default nr of setup-sectors */
BOOTSEG = 0x07C0 /* original address of boot-sector */
@@ -119,7 +120,7 @@
# Part 2 of the header, from the old setup.S
.ascii "HdrS" # header signature
- .word 0x0207 # header version number (>= 0x0105)
+ .word 0x0208 # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
.globl realmode_swtch
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
@@ -223,6 +224,9 @@
hardware_subarch_data: .quad 0
+payload_offset: .long input_data
+payload_length: .long input_data_end-input_data
+
# End of setup header #####################################################
.section ".inittext", "ax"
diff --git a/arch/x86/boot/pm.c b/arch/x86/boot/pm.c
index 1a0f936..a93cb8b 100644
--- a/arch/x86/boot/pm.c
+++ b/arch/x86/boot/pm.c
@@ -100,7 +100,7 @@
/*
* Set up the GDT
*/
-#define GDT_ENTRY(flags,base,limit) \
+#define GDT_ENTRY(flags, base, limit) \
(((u64)(base & 0xff000000) << 32) | \
((u64)flags << 40) | \
((u64)(limit & 0x00ff0000) << 32) | \
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index b424874..44dc192 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -50,6 +50,75 @@
u8 buf[SETUP_SECT_MAX*512];
int is_big_kernel;
+/*----------------------------------------------------------------------*/
+
+static const u32 crctab32[] = {
+ 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419,
+ 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4,
+ 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07,
+ 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
+ 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856,
+ 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
+ 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4,
+ 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
+ 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3,
+ 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a,
+ 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599,
+ 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+ 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190,
+ 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f,
+ 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e,
+ 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
+ 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed,
+ 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+ 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3,
+ 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
+ 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a,
+ 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5,
+ 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010,
+ 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+ 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17,
+ 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6,
+ 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615,
+ 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
+ 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344,
+ 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+ 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a,
+ 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
+ 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1,
+ 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c,
+ 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef,
+ 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+ 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe,
+ 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31,
+ 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c,
+ 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
+ 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b,
+ 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+ 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1,
+ 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
+ 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278,
+ 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7,
+ 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66,
+ 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+ 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605,
+ 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8,
+ 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b,
+ 0x2d02ef8d
+};
+
+static u32 partial_crc32_one(u8 c, u32 crc)
+{
+ return crctab32[(crc ^ c) & 0xff] ^ (crc >> 8);
+}
+
+static u32 partial_crc32(const u8 *s, int len, u32 crc)
+{
+ while (len--)
+ crc = partial_crc32_one(*s++, crc);
+ return crc;
+}
+
static void die(const char * str, ...)
{
va_list args;
@@ -74,6 +143,7 @@
FILE *file;
int fd;
void *kernel;
+ u32 crc = 0xffffffffUL;
if (argc > 2 && !strcmp(argv[1], "-b"))
{
@@ -144,7 +214,8 @@
kernel = mmap(NULL, sz, PROT_READ, MAP_SHARED, fd, 0);
if (kernel == MAP_FAILED)
die("Unable to mmap '%s': %m", argv[2]);
- sys_size = (sz + 15) / 16;
+ /* Number of 16-byte paragraphs, including space for a 4-byte CRC */
+ sys_size = (sz + 15 + 4) / 16;
if (!is_big_kernel && sys_size > DEF_SYSSIZE)
die("System is too big. Try using bzImage or modules.");
@@ -155,12 +226,27 @@
buf[0x1f6] = sys_size >> 16;
buf[0x1f7] = sys_size >> 24;
+ crc = partial_crc32(buf, i, crc);
if (fwrite(buf, 1, i, stdout) != i)
die("Writing setup failed");
/* Copy the kernel code */
+ crc = partial_crc32(kernel, sz, crc);
if (fwrite(kernel, 1, sz, stdout) != sz)
die("Writing kernel failed");
+
+ /* Add padding leaving 4 bytes for the checksum */
+ while (sz++ < (sys_size*16) - 4) {
+ crc = partial_crc32_one('\0', crc);
+ if (fwrite("\0", 1, 1, stdout) != 1)
+ die("Writing padding failed");
+ }
+
+ /* Write the CRC */
+ fprintf(stderr, "CRC %lx\n", crc);
+ if (fwrite(&crc, 1, 4, stdout) != 4)
+ die("Writing CRC failed");
+
close(fd);
/* Everything is OK */
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index ff664a1..39e247e 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -50,6 +50,7 @@
if (new_mode == mode)
return 0; /* Mode change OK */
+#ifndef _WAKEUP
if (new_mode != boot_params.screen_info.orig_video_mode) {
/* Mode setting failed, but we didn't end up where we
started. That's bad. Try to revert to the original
@@ -59,13 +60,18 @@
: "+a" (ax)
: : "ebx", "ecx", "edx", "esi", "edi");
}
+#endif
return -1;
}
static int bios_probe(void)
{
u8 mode;
+#ifdef _WAKEUP
+ u8 saved_mode = 0x03;
+#else
u8 saved_mode = boot_params.screen_info.orig_video_mode;
+#endif
u16 crtc;
struct mode_info *mi;
int nmodes = 0;
diff --git a/arch/x86/boot/video-mode.c b/arch/x86/boot/video-mode.c
new file mode 100644
index 0000000..748e8d0
--- /dev/null
+++ b/arch/x86/boot/video-mode.c
@@ -0,0 +1,173 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007-2008 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/video-mode.c
+ *
+ * Set the video mode. This is separated out into a different
+ * file in order to be shared with the ACPI wakeup code.
+ */
+
+#include "boot.h"
+#include "video.h"
+#include "vesa.h"
+
+/*
+ * Common variables
+ */
+int adapter; /* 0=CGA/MDA/HGC, 1=EGA, 2=VGA+ */
+u16 video_segment;
+int force_x, force_y; /* Don't query the BIOS for cols/rows */
+
+int do_restore; /* Screen contents changed during mode flip */
+int graphic_mode; /* Graphic mode with linear frame buffer */
+
+/* Probe the video drivers and have them generate their mode lists. */
+void probe_cards(int unsafe)
+{
+ struct card_info *card;
+ static u8 probed[2];
+
+ if (probed[unsafe])
+ return;
+
+ probed[unsafe] = 1;
+
+ for (card = video_cards; card < video_cards_end; card++) {
+ if (card->unsafe == unsafe) {
+ if (card->probe)
+ card->nmodes = card->probe();
+ else
+ card->nmodes = 0;
+ }
+ }
+}
+
+/* Test if a mode is defined */
+int mode_defined(u16 mode)
+{
+ struct card_info *card;
+ struct mode_info *mi;
+ int i;
+
+ for (card = video_cards; card < video_cards_end; card++) {
+ mi = card->modes;
+ for (i = 0; i < card->nmodes; i++, mi++) {
+ if (mi->mode == mode)
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/* Set mode (without recalc) */
+static int raw_set_mode(u16 mode, u16 *real_mode)
+{
+ int nmode, i;
+ struct card_info *card;
+ struct mode_info *mi;
+
+ /* Drop the recalc bit if set */
+ mode &= ~VIDEO_RECALC;
+
+ /* Scan for mode based on fixed ID, position, or resolution */
+ nmode = 0;
+ for (card = video_cards; card < video_cards_end; card++) {
+ mi = card->modes;
+ for (i = 0; i < card->nmodes; i++, mi++) {
+ int visible = mi->x || mi->y;
+
+ if ((mode == nmode && visible) ||
+ mode == mi->mode ||
+ mode == (mi->y << 8)+mi->x) {
+ *real_mode = mi->mode;
+ return card->set_mode(mi);
+ }
+
+ if (visible)
+ nmode++;
+ }
+ }
+
+ /* Nothing found? Is it an "exceptional" (unprobed) mode? */
+ for (card = video_cards; card < video_cards_end; card++) {
+ if (mode >= card->xmode_first &&
+ mode < card->xmode_first+card->xmode_n) {
+ struct mode_info mix;
+ *real_mode = mix.mode = mode;
+ mix.x = mix.y = 0;
+ return card->set_mode(&mix);
+ }
+ }
+
+ /* Otherwise, failure... */
+ return -1;
+}
+
+/*
+ * Recalculate the vertical video cutoff (hack!)
+ */
+static void vga_recalc_vertical(void)
+{
+ unsigned int font_size, rows;
+ u16 crtc;
+ u8 pt, ov;
+
+ set_fs(0);
+ font_size = rdfs8(0x485); /* BIOS: font size (pixels) */
+ rows = force_y ? force_y : rdfs8(0x484)+1; /* Text rows */
+
+ rows *= font_size; /* Visible scan lines */
+ rows--; /* ... minus one */
+
+ crtc = vga_crtc();
+
+ pt = in_idx(crtc, 0x11);
+ pt &= ~0x80; /* Unlock CR0-7 */
+ out_idx(pt, crtc, 0x11);
+
+ out_idx((u8)rows, crtc, 0x12); /* Lower height register */
+
+ ov = in_idx(crtc, 0x07); /* Overflow register */
+ ov &= 0xbd;
+ ov |= (rows >> (8-1)) & 0x02;
+ ov |= (rows >> (9-6)) & 0x40;
+ out_idx(ov, crtc, 0x07);
+}
+
+/* Set mode (with recalc if specified) */
+int set_mode(u16 mode)
+{
+ int rv;
+ u16 real_mode;
+
+ /* Very special mode numbers... */
+ if (mode == VIDEO_CURRENT_MODE)
+ return 0; /* Nothing to do... */
+ else if (mode == NORMAL_VGA)
+ mode = VIDEO_80x25;
+ else if (mode == EXTENDED_VGA)
+ mode = VIDEO_8POINT;
+
+ rv = raw_set_mode(mode, &real_mode);
+ if (rv)
+ return rv;
+
+ if (mode & VIDEO_RECALC)
+ vga_recalc_vertical();
+
+ /* Save the canonical mode number for the kernel, not
+ an alias, size specification or menu position */
+#ifndef _WAKEUP
+ boot_params.hdr.vid_mode = real_mode;
+#endif
+ return 0;
+}
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 419b5c2..5d5a3f6 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -24,7 +24,11 @@
__videocard video_vesa;
+#ifndef _WAKEUP
static void vesa_store_mode_params_graphics(void);
+#else /* _WAKEUP */
+static inline void vesa_store_mode_params_graphics(void) {}
+#endif /* _WAKEUP */
static int vesa_probe(void)
{
@@ -165,6 +169,8 @@
}
+#ifndef _WAKEUP
+
/* Switch DAC to 8-bit mode */
static void vesa_dac_set_8bits(void)
{
@@ -288,6 +294,8 @@
#endif /* CONFIG_FIRMWARE_EDID */
}
+#endif /* not _WAKEUP */
+
__videocard video_vesa =
{
.card_name = "VESA",
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 7259387..330d658 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -210,6 +210,8 @@
*/
static int vga_probe(void)
{
+ u16 ega_bx;
+
static const char *card_name[] = {
"CGA/MDA/HGC", "EGA", "VGA"
};
@@ -226,12 +228,16 @@
u8 vga_flag;
asm(INT10
- : "=b" (boot_params.screen_info.orig_video_ega_bx)
+ : "=b" (ega_bx)
: "a" (0x1200), "b" (0x10) /* Check EGA/VGA */
: "ecx", "edx", "esi", "edi");
+#ifndef _WAKEUP
+ boot_params.screen_info.orig_video_ega_bx = ega_bx;
+#endif
+
/* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */
- if ((u8)boot_params.screen_info.orig_video_ega_bx != 0x10) {
+ if ((u8)ega_bx != 0x10) {
/* EGA/VGA */
asm(INT10
: "=a" (vga_flag)
@@ -240,7 +246,9 @@
if (vga_flag == 0x1a) {
adapter = ADAPTER_VGA;
+#ifndef _WAKEUP
boot_params.screen_info.orig_video_isVGA = 1;
+#endif
} else {
adapter = ADAPTER_EGA;
}
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index 696d08f..c1c47ba 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -18,21 +18,6 @@
#include "video.h"
#include "vesa.h"
-/*
- * Mode list variables
- */
-static struct card_info cards[]; /* List of cards to probe for */
-
-/*
- * Common variables
- */
-int adapter; /* 0=CGA/MDA/HGC, 1=EGA, 2=VGA+ */
-u16 video_segment;
-int force_x, force_y; /* Don't query the BIOS for cols/rows */
-
-int do_restore = 0; /* Screen contents changed during mode flip */
-int graphic_mode; /* Graphic mode with linear frame buffer */
-
static void store_cursor_position(void)
{
u16 curpos;
@@ -107,147 +92,6 @@
boot_params.screen_info.orig_video_lines = y;
}
-/* Probe the video drivers and have them generate their mode lists. */
-static void probe_cards(int unsafe)
-{
- struct card_info *card;
- static u8 probed[2];
-
- if (probed[unsafe])
- return;
-
- probed[unsafe] = 1;
-
- for (card = video_cards; card < video_cards_end; card++) {
- if (card->unsafe == unsafe) {
- if (card->probe)
- card->nmodes = card->probe();
- else
- card->nmodes = 0;
- }
- }
-}
-
-/* Test if a mode is defined */
-int mode_defined(u16 mode)
-{
- struct card_info *card;
- struct mode_info *mi;
- int i;
-
- for (card = video_cards; card < video_cards_end; card++) {
- mi = card->modes;
- for (i = 0; i < card->nmodes; i++, mi++) {
- if (mi->mode == mode)
- return 1;
- }
- }
-
- return 0;
-}
-
-/* Set mode (without recalc) */
-static int raw_set_mode(u16 mode, u16 *real_mode)
-{
- int nmode, i;
- struct card_info *card;
- struct mode_info *mi;
-
- /* Drop the recalc bit if set */
- mode &= ~VIDEO_RECALC;
-
- /* Scan for mode based on fixed ID, position, or resolution */
- nmode = 0;
- for (card = video_cards; card < video_cards_end; card++) {
- mi = card->modes;
- for (i = 0; i < card->nmodes; i++, mi++) {
- int visible = mi->x || mi->y;
-
- if ((mode == nmode && visible) ||
- mode == mi->mode ||
- mode == (mi->y << 8)+mi->x) {
- *real_mode = mi->mode;
- return card->set_mode(mi);
- }
-
- if (visible)
- nmode++;
- }
- }
-
- /* Nothing found? Is it an "exceptional" (unprobed) mode? */
- for (card = video_cards; card < video_cards_end; card++) {
- if (mode >= card->xmode_first &&
- mode < card->xmode_first+card->xmode_n) {
- struct mode_info mix;
- *real_mode = mix.mode = mode;
- mix.x = mix.y = 0;
- return card->set_mode(&mix);
- }
- }
-
- /* Otherwise, failure... */
- return -1;
-}
-
-/*
- * Recalculate the vertical video cutoff (hack!)
- */
-static void vga_recalc_vertical(void)
-{
- unsigned int font_size, rows;
- u16 crtc;
- u8 pt, ov;
-
- set_fs(0);
- font_size = rdfs8(0x485); /* BIOS: font size (pixels) */
- rows = force_y ? force_y : rdfs8(0x484)+1; /* Text rows */
-
- rows *= font_size; /* Visible scan lines */
- rows--; /* ... minus one */
-
- crtc = vga_crtc();
-
- pt = in_idx(crtc, 0x11);
- pt &= ~0x80; /* Unlock CR0-7 */
- out_idx(pt, crtc, 0x11);
-
- out_idx((u8)rows, crtc, 0x12); /* Lower height register */
-
- ov = in_idx(crtc, 0x07); /* Overflow register */
- ov &= 0xbd;
- ov |= (rows >> (8-1)) & 0x02;
- ov |= (rows >> (9-6)) & 0x40;
- out_idx(ov, crtc, 0x07);
-}
-
-/* Set mode (with recalc if specified) */
-static int set_mode(u16 mode)
-{
- int rv;
- u16 real_mode;
-
- /* Very special mode numbers... */
- if (mode == VIDEO_CURRENT_MODE)
- return 0; /* Nothing to do... */
- else if (mode == NORMAL_VGA)
- mode = VIDEO_80x25;
- else if (mode == EXTENDED_VGA)
- mode = VIDEO_8POINT;
-
- rv = raw_set_mode(mode, &real_mode);
- if (rv)
- return rv;
-
- if (mode & VIDEO_RECALC)
- vga_recalc_vertical();
-
- /* Save the canonical mode number for the kernel, not
- an alias, size specification or menu position */
- boot_params.hdr.vid_mode = real_mode;
- return 0;
-}
-
static unsigned int get_entry(void)
{
char entry_buf[4];
@@ -486,6 +330,7 @@
printf("Undefined video mode number: %x\n", mode);
mode = ASK_VGA;
}
+ boot_params.hdr.vid_mode = mode;
vesa_store_edid();
store_mode_params();
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 5e7771a..05e155d 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -468,7 +468,7 @@
restorer = ka->sa.sa_restorer;
} else {
/* Return stub is in 32bit vsyscall page */
- if (current->binfmt->hasvdso)
+ if (current->mm->context.vdso)
restorer = VDSO32_SYMBOL(current->mm->context.vdso,
sigreturn);
else
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 8022d3c..ae7158b 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -162,12 +162,14 @@
SAVE_REST
CLEAR_RREGS
movq %r9,R9(%rsp)
- movq $-ENOSYS,RAX(%rsp) /* really needed? */
+ movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
xchgl %ebp,%r9d
+ cmpl $(IA32_NR_syscalls-1),%eax
+ ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
jmp sysenter_do_call
CFI_ENDPROC
ENDPROC(ia32_sysenter_target)
@@ -261,13 +263,15 @@
SAVE_REST
CLEAR_RREGS
movq %r9,R9(%rsp)
- movq $-ENOSYS,RAX(%rsp) /* really needed? */
+ movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
xchgl %ebp,%r9d
movl RSP-ARGOFFSET(%rsp), %r8d
+ cmpl $(IA32_NR_syscalls-1),%eax
+ ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */
jmp cstar_do_call
END(ia32_cstar_target)
@@ -325,7 +329,7 @@
jnz ia32_tracesys
ia32_do_syscall:
cmpl $(IA32_NR_syscalls-1),%eax
- ja ia32_badsys
+ ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */
IA32_ARG_FIXUP
call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
ia32_sysret:
@@ -335,7 +339,7 @@
ia32_tracesys:
SAVE_REST
CLEAR_RREGS
- movq $-ENOSYS,RAX(%rsp) /* really needed? */
+ movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index abf71d2..7cede7a 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -26,51 +26,27 @@
#include <linux/file.h>
#include <linux/signal.h>
#include <linux/syscalls.h>
-#include <linux/resource.h>
#include <linux/times.h>
#include <linux/utsname.h>
-#include <linux/smp.h>
#include <linux/smp_lock.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
#include <linux/mm.h>
-#include <linux/shm.h>
-#include <linux/slab.h>
#include <linux/uio.h>
-#include <linux/nfs_fs.h>
-#include <linux/quota.h>
-#include <linux/module.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
#include <linux/poll.h>
#include <linux/personality.h>
#include <linux/stat.h>
-#include <linux/ipc.h>
#include <linux/rwsem.h>
-#include <linux/binfmts.h>
-#include <linux/init.h>
-#include <linux/aio_abi.h>
-#include <linux/aio.h>
#include <linux/compat.h>
#include <linux/vfs.h>
#include <linux/ptrace.h>
#include <linux/highuid.h>
-#include <linux/vmalloc.h>
-#include <linux/fsnotify.h>
#include <linux/sysctl.h>
#include <asm/mman.h>
#include <asm/types.h>
#include <asm/uaccess.h>
#include <asm/semaphore.h>
#include <asm/atomic.h>
-#include <asm/ldt.h>
-
-#include <net/scm.h>
-#include <net/sock.h>
#include <asm/ia32.h>
+#include <asm/vgtod.h>
#define AA(__x) ((unsigned long)(__x))
@@ -804,11 +780,6 @@
if (IS_ERR(filename))
return error;
error = compat_do_execve(filename, argv, envp, regs);
- if (error == 0) {
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
- }
putname(filename);
return error;
}
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 4eb5ce8..c3920ea 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -2,8 +2,7 @@
# Makefile for the linux kernel.
#
-extra-y := head_$(BITS).o init_task.o vmlinux.lds
-extra-$(CONFIG_X86_64) += head64.o
+extra-y := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds
CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
@@ -19,7 +18,7 @@
obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
obj-y += traps_$(BITS).o irq_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o
-obj-y += setup_$(BITS).o i8259_$(BITS).o
+obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o
@@ -29,6 +28,7 @@
obj-$(CONFIG_X86_64) += pci-nommu_64.o bugs_64.o
obj-y += tsc_$(BITS).o io_delay.o rtc.o
+obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
obj-y += i387.o
obj-y += ptrace.o
obj-y += ds.o
@@ -47,11 +47,12 @@
obj-$(CONFIG_PCI) += early-quirks.o
apm-y := apm_32.o
obj-$(CONFIG_APM) += apm.o
-obj-$(CONFIG_X86_SMP) += smp_$(BITS).o smpboot_$(BITS).o tsc_sync.o
-obj-$(CONFIG_X86_32_SMP) += smpcommon_32.o
-obj-$(CONFIG_X86_64_SMP) += smp_64.o smpboot_64.o tsc_sync.o
+obj-$(CONFIG_X86_SMP) += smp.o
+obj-$(CONFIG_X86_SMP) += smpboot.o tsc_sync.o ipi.o tlb_$(BITS).o
+obj-$(CONFIG_X86_32_SMP) += smpcommon.o
+obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o
-obj-$(CONFIG_X86_MPPARSE) += mpparse_$(BITS).o
+obj-$(CONFIG_X86_MPPARSE) += mpparse.o
obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o
obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
@@ -60,12 +61,13 @@
obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit_32.o
-obj-$(CONFIG_X86_VSMP) += vsmp_64.o
+obj-y += vsmp_64.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_MODULES) += module_$(BITS).o
obj-$(CONFIG_ACPI_SRAT) += srat_32.o
obj-$(CONFIG_EFI) += efi.o efi_$(BITS).o efi_stub_$(BITS).o
obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o
+obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_VM86) += vm86_32.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
@@ -89,7 +91,7 @@
###
# 64 bit specific files
ifeq ($(CONFIG_X86_64),y)
- obj-y += genapic_64.o genapic_flat_64.o
+ obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o
obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o
obj-$(CONFIG_AUDIT) += audit_64.o
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
index 19d3d6e..7335959 100644
--- a/arch/x86/kernel/acpi/Makefile
+++ b/arch/x86/kernel/acpi/Makefile
@@ -1,7 +1,14 @@
+subdir- := realmode
+
obj-$(CONFIG_ACPI) += boot.o
-obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_$(BITS).o
+obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_rm.o wakeup_$(BITS).o
ifneq ($(CONFIG_ACPI_PROCESSOR),)
obj-y += cstate.o processor.o
endif
+$(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin
+
+$(obj)/realmode/wakeup.bin: FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/realmode $@
+
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 2cdc9de..057ccf1 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -39,6 +39,11 @@
#include <asm/apic.h>
#include <asm/io.h>
#include <asm/mpspec.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_X86_LOCAL_APIC
+# include <mach_apic.h>
+#endif
static int __initdata acpi_force = 0;
@@ -52,9 +57,7 @@
#ifdef CONFIG_X86_64
#include <asm/proto.h>
-
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
-
+#include <asm/genapic.h>
#else /* X86 */
@@ -111,7 +114,7 @@
if (!phys_addr || !size)
return NULL;
- if (phys_addr+size <= (end_pfn_map << PAGE_SHIFT) + PAGE_SIZE)
+ if (phys_addr+size <= (max_pfn_mapped << PAGE_SHIFT) + PAGE_SIZE)
return __va(phys_addr);
return NULL;
@@ -237,6 +240,16 @@
return 0;
}
+static void __cpuinit acpi_register_lapic(int id, u8 enabled)
+{
+ if (!enabled) {
+ ++disabled_cpus;
+ return;
+ }
+
+ generic_processor_info(id, 0);
+}
+
static int __init
acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
{
@@ -256,8 +269,26 @@
* to not preallocating memory for all NR_CPUS
* when we use CPU hotplug.
*/
- mp_register_lapic(processor->id, /* APIC ID */
- processor->lapic_flags & ACPI_MADT_ENABLED); /* Enabled? */
+ acpi_register_lapic(processor->id, /* APIC ID */
+ processor->lapic_flags & ACPI_MADT_ENABLED);
+
+ return 0;
+}
+
+static int __init
+acpi_parse_sapic(struct acpi_subtable_header *header, const unsigned long end)
+{
+ struct acpi_madt_local_sapic *processor = NULL;
+
+ processor = (struct acpi_madt_local_sapic *)header;
+
+ if (BAD_MADT_ENTRY(processor, end))
+ return -EINVAL;
+
+ acpi_table_print_madt_entry(header);
+
+ acpi_register_lapic((processor->id << 8) | processor->eid,/* APIC ID */
+ processor->lapic_flags & ACPI_MADT_ENABLED);
return 0;
}
@@ -300,6 +331,8 @@
#ifdef CONFIG_X86_IO_APIC
+struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
+
static int __init
acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
{
@@ -532,7 +565,7 @@
buffer.pointer = NULL;
tmp_map = cpu_present_map;
- mp_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
+ acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
/*
* If mp_register_lapic successfully generates a new logical cpu
@@ -732,6 +765,16 @@
* Parse LAPIC entries in MADT
* returns 0 on success, < 0 on error
*/
+
+static void __init acpi_register_lapic_address(unsigned long address)
+{
+ mp_lapic_addr = address;
+
+ set_fixmap_nocache(FIX_APIC_BASE, address);
+ if (boot_cpu_physical_apicid == -1U)
+ boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+}
+
static int __init acpi_parse_madt_lapic_entries(void)
{
int count;
@@ -753,10 +796,14 @@
return count;
}
- mp_register_lapic_address(acpi_lapic_addr);
+ acpi_register_lapic_address(acpi_lapic_addr);
- count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, acpi_parse_lapic,
- MAX_APICS);
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
+ acpi_parse_sapic, MAX_APICS);
+
+ if (!count)
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
+ acpi_parse_lapic, MAX_APICS);
if (!count) {
printk(KERN_ERR PREFIX "No LAPIC entries present\n");
/* TBD: Cleanup to allow fallback to MPS */
diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile
new file mode 100644
index 0000000..0929008
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/Makefile
@@ -0,0 +1,57 @@
+#
+# arch/x86/kernel/acpi/realmode/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+targets := wakeup.bin wakeup.elf
+
+wakeup-y += wakeup.o wakemain.o video-mode.o copy.o
+
+# The link order of the video-*.o modules can matter. In particular,
+# video-vga.o *must* be listed first, followed by video-vesa.o.
+# Hardware-specific drivers should follow in the order they should be
+# probed, and video-bios.o should typically be last.
+wakeup-y += video-vga.o
+wakeup-y += video-vesa.o
+wakeup-y += video-bios.o
+
+targets += $(wakeup-y)
+
+bootsrc := $(src)/../../../boot
+
+# ---------------------------------------------------------------------------
+
+# How to compile the 16-bit code. Note we always compile for -march=i386,
+# that way we can complain to the user if the CPU is insufficient.
+# Compile with _SETUP since this is similar to the boot-time setup code.
+KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \
+ -I$(srctree)/$(bootsrc) \
+ $(cflags-y) \
+ -Wall -Wstrict-prototypes \
+ -march=i386 -mregparm=3 \
+ -include $(srctree)/$(bootsrc)/code16gcc.h \
+ -fno-strict-aliasing -fomit-frame-pointer \
+ $(call cc-option, -ffreestanding) \
+ $(call cc-option, -fno-toplevel-reorder,\
+ $(call cc-option, -fno-unit-at-a-time)) \
+ $(call cc-option, -fno-stack-protector) \
+ $(call cc-option, -mpreferred-stack-boundary=2)
+KBUILD_CFLAGS += $(call cc-option, -m32)
+KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
+
+WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y))
+
+LDFLAGS_wakeup.elf := -T
+
+CPPFLAGS_wakeup.lds += -P -C
+
+$(obj)/wakeup.elf: $(src)/wakeup.lds $(WAKEUP_OBJS) FORCE
+ $(call if_changed,ld)
+
+OBJCOPYFLAGS_wakeup.bin := -O binary
+
+$(obj)/wakeup.bin: $(obj)/wakeup.elf FORCE
+ $(call if_changed,objcopy)
diff --git a/arch/x86/kernel/acpi/realmode/copy.S b/arch/x86/kernel/acpi/realmode/copy.S
new file mode 100644
index 0000000..dc59ebe
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/copy.S
@@ -0,0 +1 @@
+#include "../../../boot/copy.S"
diff --git a/arch/x86/kernel/acpi/realmode/video-bios.c b/arch/x86/kernel/acpi/realmode/video-bios.c
new file mode 100644
index 0000000..7deabc1
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/video-bios.c
@@ -0,0 +1 @@
+#include "../../../boot/video-bios.c"
diff --git a/arch/x86/kernel/acpi/realmode/video-mode.c b/arch/x86/kernel/acpi/realmode/video-mode.c
new file mode 100644
index 0000000..328ad20
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/video-mode.c
@@ -0,0 +1 @@
+#include "../../../boot/video-mode.c"
diff --git a/arch/x86/kernel/acpi/realmode/video-vesa.c b/arch/x86/kernel/acpi/realmode/video-vesa.c
new file mode 100644
index 0000000..9dbb967
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/video-vesa.c
@@ -0,0 +1 @@
+#include "../../../boot/video-vesa.c"
diff --git a/arch/x86/kernel/acpi/realmode/video-vga.c b/arch/x86/kernel/acpi/realmode/video-vga.c
new file mode 100644
index 0000000..bcc8125
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/video-vga.c
@@ -0,0 +1 @@
+#include "../../../boot/video-vga.c"
diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c
new file mode 100644
index 0000000..883962d
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/wakemain.c
@@ -0,0 +1,81 @@
+#include "wakeup.h"
+#include "boot.h"
+
+static void udelay(int loops)
+{
+ while (loops--)
+ io_delay(); /* Approximately 1 us */
+}
+
+static void beep(unsigned int hz)
+{
+ u8 enable;
+
+ if (!hz) {
+ enable = 0x00; /* Turn off speaker */
+ } else {
+ u16 div = 1193181/hz;
+
+ outb(0xb6, 0x43); /* Ctr 2, squarewave, load, binary */
+ io_delay();
+ outb(div, 0x42); /* LSB of counter */
+ io_delay();
+ outb(div >> 8, 0x42); /* MSB of counter */
+ io_delay();
+
+ enable = 0x03; /* Turn on speaker */
+ }
+ inb(0x61); /* Dummy read of System Control Port B */
+ io_delay();
+ outb(enable, 0x61); /* Enable timer 2 output to speaker */
+ io_delay();
+}
+
+#define DOT_HZ 880
+#define DASH_HZ 587
+#define US_PER_DOT 125000
+
+/* Okay, this is totally silly, but it's kind of fun. */
+static void send_morse(const char *pattern)
+{
+ char s;
+
+ while ((s = *pattern++)) {
+ switch (s) {
+ case '.':
+ beep(DOT_HZ);
+ udelay(US_PER_DOT);
+ beep(0);
+ udelay(US_PER_DOT);
+ break;
+ case '-':
+ beep(DASH_HZ);
+ udelay(US_PER_DOT * 3);
+ beep(0);
+ udelay(US_PER_DOT);
+ break;
+ default: /* Assume it's a space */
+ udelay(US_PER_DOT * 3);
+ break;
+ }
+ }
+}
+
+void main(void)
+{
+ /* Kill machine if structures are wrong */
+ if (wakeup_header.real_magic != 0x12345678)
+ while (1);
+
+ if (wakeup_header.realmode_flags & 4)
+ send_morse("...-");
+
+ if (wakeup_header.realmode_flags & 1)
+ asm volatile("lcallw $0xc000,$3");
+
+ if (wakeup_header.realmode_flags & 2) {
+ /* Need to call BIOS */
+ probe_cards(0);
+ set_mode(wakeup_header.video_mode);
+ }
+}
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S
new file mode 100644
index 0000000..f9b77fb
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/wakeup.S
@@ -0,0 +1,113 @@
+/*
+ * ACPI wakeup real mode startup stub
+ */
+#include <asm/segment.h>
+#include <asm/msr-index.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+ .code16
+ .section ".header", "a"
+
+/* This should match the structure in wakeup.h */
+ .globl wakeup_header
+wakeup_header:
+video_mode: .short 0 /* Video mode number */
+pmode_return: .byte 0x66, 0xea /* ljmpl */
+ .long 0 /* offset goes here */
+ .short __KERNEL_CS
+pmode_cr0: .long 0 /* Saved %cr0 */
+pmode_cr3: .long 0 /* Saved %cr3 */
+pmode_cr4: .long 0 /* Saved %cr4 */
+pmode_efer: .quad 0 /* Saved EFER */
+pmode_gdt: .quad 0
+realmode_flags: .long 0
+real_magic: .long 0
+trampoline_segment: .word 0
+signature: .long 0x51ee1111
+
+ .text
+ .globl _start
+ .code16
+wakeup_code:
+_start:
+ cli
+ cld
+
+ /* Set up segments */
+ movw %cs, %ax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss
+
+ movl $wakeup_stack_end, %esp
+
+ /* Clear the EFLAGS */
+ pushl $0
+ popfl
+
+ /* Check header signature... */
+ movl signature, %eax
+ cmpl $0x51ee1111, %eax
+ jne bogus_real_magic
+
+ /* Check we really have everything... */
+ movl end_signature, %eax
+ cmpl $0x65a22c82, %eax
+ jne bogus_real_magic
+
+ /* Call the C code */
+ calll main
+
+ /* Do any other stuff... */
+
+#ifndef CONFIG_64BIT
+ /* This could also be done in C code... */
+ movl pmode_cr3, %eax
+ movl %eax, %cr3
+
+ movl pmode_cr4, %ecx
+ jecxz 1f
+ movl %ecx, %cr4
+1:
+ movl pmode_efer, %eax
+ movl pmode_efer + 4, %edx
+ movl %eax, %ecx
+ orl %edx, %ecx
+ jz 1f
+ movl $0xc0000080, %ecx
+ wrmsr
+1:
+
+ lgdtl pmode_gdt
+
+ /* This really couldn't... */
+ movl pmode_cr0, %eax
+ movl %eax, %cr0
+ jmp pmode_return
+#else
+ pushw $0
+ pushw trampoline_segment
+ pushw $0
+ lret
+#endif
+
+bogus_real_magic:
+1:
+ hlt
+ jmp 1b
+
+ .data
+ .balign 4
+ .globl HEAP, heap_end
+HEAP:
+ .long wakeup_heap
+heap_end:
+ .long wakeup_stack
+
+ .bss
+wakeup_heap:
+ .space 2048
+wakeup_stack:
+ .space 2048
+wakeup_stack_end:
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h
new file mode 100644
index 0000000..ef8166f
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/wakeup.h
@@ -0,0 +1,36 @@
+/*
+ * Definitions for the wakeup data structure at the head of the
+ * wakeup code.
+ */
+
+#ifndef ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H
+#define ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+/* This must match data at wakeup.S */
+struct wakeup_header {
+ u16 video_mode; /* Video mode number */
+ u16 _jmp1; /* ljmpl opcode, 32-bit only */
+ u32 pmode_entry; /* Protected mode resume point, 32-bit only */
+ u16 _jmp2; /* CS value, 32-bit only */
+ u32 pmode_cr0; /* Protected mode cr0 */
+ u32 pmode_cr3; /* Protected mode cr3 */
+ u32 pmode_cr4; /* Protected mode cr4 */
+ u32 pmode_efer_low; /* Protected mode EFER */
+ u32 pmode_efer_high;
+ u64 pmode_gdt;
+ u32 realmode_flags;
+ u32 real_magic;
+ u16 trampoline_segment; /* segment with trampoline code, 64-bit only */
+ u32 signature; /* To check we have correct structure */
+} __attribute__((__packed__));
+
+extern struct wakeup_header wakeup_header;
+#endif
+
+#define HEADER_OFFSET 0x3f00
+#define WAKEUP_SIZE 0x4000
+
+#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
new file mode 100644
index 0000000..22fab6c
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
@@ -0,0 +1,61 @@
+/*
+ * wakeup.ld
+ *
+ * Linker script for the real-mode wakeup code
+ */
+#undef i386
+#include "wakeup.h"
+
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(_start)
+
+SECTIONS
+{
+ . = HEADER_OFFSET;
+ .header : {
+ *(.header)
+ }
+
+ . = 0;
+ .text : {
+ *(.text*)
+ }
+
+ . = ALIGN(16);
+ .rodata : {
+ *(.rodata*)
+ }
+
+ .videocards : {
+ video_cards = .;
+ *(.videocards)
+ video_cards_end = .;
+ }
+
+ . = ALIGN(16);
+ .data : {
+ *(.data*)
+ }
+
+ .signature : {
+ end_signature = .;
+ LONG(0x65a22c82)
+ }
+
+ . = ALIGN(16);
+ .bss : {
+ __bss_start = .;
+ *(.bss)
+ __bss_end = .;
+ }
+
+ . = ALIGN(16);
+ _end = .;
+
+ /DISCARD/ : {
+ *(.note*)
+ }
+
+ . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!");
+}
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 6bc815c..afc25ee 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -10,30 +10,72 @@
#include <linux/dmi.h>
#include <linux/cpumask.h>
-#include <asm/smp.h>
+#include "realmode/wakeup.h"
+#include "sleep.h"
+
+unsigned long acpi_wakeup_address;
+unsigned long acpi_realmode_flags;
/* address in low memory of the wakeup routine. */
-unsigned long acpi_wakeup_address = 0;
-unsigned long acpi_realmode_flags;
-extern char wakeup_start, wakeup_end;
+static unsigned long acpi_realmode;
-extern unsigned long acpi_copy_wakeup_routine(unsigned long);
+#ifdef CONFIG_64BIT
+static char temp_stack[10240];
+#endif
/**
* acpi_save_state_mem - save kernel state
*
* Create an identity mapped page table and copy the wakeup routine to
* low memory.
+ *
+ * Note that this is too late to change acpi_wakeup_address.
*/
int acpi_save_state_mem(void)
{
- if (!acpi_wakeup_address) {
- printk(KERN_ERR "Could not allocate memory during boot, S3 disabled\n");
+ struct wakeup_header *header;
+
+ if (!acpi_realmode) {
+ printk(KERN_ERR "Could not allocate memory during boot, "
+ "S3 disabled\n");
return -ENOMEM;
}
- memcpy((void *)acpi_wakeup_address, &wakeup_start,
- &wakeup_end - &wakeup_start);
- acpi_copy_wakeup_routine(acpi_wakeup_address);
+ memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE);
+
+ header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET);
+ if (header->signature != 0x51ee1111) {
+ printk(KERN_ERR "wakeup header does not match\n");
+ return -EINVAL;
+ }
+
+ header->video_mode = saved_video_mode;
+
+#ifndef CONFIG_64BIT
+ store_gdt((struct desc_ptr *)&header->pmode_gdt);
+
+ header->pmode_efer_low = nx_enabled;
+ if (header->pmode_efer_low & 1) {
+ /* This is strange, why not save efer, always? */
+ rdmsr(MSR_EFER, header->pmode_efer_low,
+ header->pmode_efer_high);
+ }
+#endif /* !CONFIG_64BIT */
+
+ header->pmode_cr0 = read_cr0();
+ header->pmode_cr4 = read_cr4();
+ header->realmode_flags = acpi_realmode_flags;
+ header->real_magic = 0x12345678;
+
+#ifndef CONFIG_64BIT
+ header->pmode_entry = (u32)&wakeup_pmode_return;
+ header->pmode_cr3 = (u32)(swsusp_pg_dir - __PAGE_OFFSET);
+ saved_magic = 0x12345678;
+#else /* CONFIG_64BIT */
+ header->trampoline_segment = setup_trampoline() >> 4;
+ init_rsp = (unsigned long)temp_stack + 4096;
+ initial_code = (unsigned long)wakeup_long64;
+ saved_magic = 0x123456789abcdef0;
+#endif /* CONFIG_64BIT */
return 0;
}
@@ -56,15 +98,20 @@
*/
void __init acpi_reserve_bootmem(void)
{
- if ((&wakeup_end - &wakeup_start) > PAGE_SIZE*2) {
+ if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) {
printk(KERN_ERR
"ACPI: Wakeup code way too big, S3 disabled.\n");
return;
}
- acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2);
- if (!acpi_wakeup_address)
+ acpi_realmode = (unsigned long)alloc_bootmem_low(WAKEUP_SIZE);
+
+ if (!acpi_realmode) {
printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
+ return;
+ }
+
+ acpi_wakeup_address = acpi_realmode;
}
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
new file mode 100644
index 0000000..adbcbaa
--- /dev/null
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -0,0 +1,16 @@
+/*
+ * Variables and functions used by the code in sleep.c
+ */
+
+#include <asm/trampoline.h>
+
+extern char wakeup_code_start, wakeup_code_end;
+
+extern unsigned long saved_video_mode;
+extern long saved_magic;
+
+extern int wakeup_pmode_return;
+extern char swsusp_pg_dir[PAGE_SIZE];
+
+extern unsigned long acpi_copy_wakeup_routine(unsigned long);
+extern void wakeup_long64(void);
diff --git a/arch/x86/kernel/acpi/sleep_32.c b/arch/x86/kernel/acpi/sleep_32.c
deleted file mode 100644
index 63fe552..0000000
--- a/arch/x86/kernel/acpi/sleep_32.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * sleep.c - x86-specific ACPI sleep support.
- *
- * Copyright (C) 2001-2003 Patrick Mochel
- * Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
- */
-
-#include <linux/acpi.h>
-#include <linux/bootmem.h>
-#include <linux/dmi.h>
-#include <linux/cpumask.h>
-
-#include <asm/smp.h>
-
-/* Ouch, we want to delete this. We already have better version in userspace, in
- s2ram from suspend.sf.net project */
-static __init int reset_videomode_after_s3(const struct dmi_system_id *d)
-{
- acpi_realmode_flags |= 2;
- return 0;
-}
-
-static __initdata struct dmi_system_id acpisleep_dmi_table[] = {
- { /* Reset video mode after returning from ACPI S3 sleep */
- .callback = reset_videomode_after_s3,
- .ident = "Toshiba Satellite 4030cdt",
- .matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
- },
- },
- {}
-};
-
-static int __init acpisleep_dmi_init(void)
-{
- dmi_check_system(acpisleep_dmi_table);
- return 0;
-}
-
-core_initcall(acpisleep_dmi_init);
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index f53e327..a12e6a9 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -3,178 +3,12 @@
#include <asm/segment.h>
#include <asm/page.h>
-#
-# wakeup_code runs in real mode, and at unknown address (determined at run-time).
-# Therefore it must only use relative jumps/calls.
-#
-# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
-#
-# If physical address of wakeup_code is 0x12345, BIOS should call us with
-# cs = 0x1234, eip = 0x05
-#
-
-#define BEEP \
- inb $97, %al; \
- outb %al, $0x80; \
- movb $3, %al; \
- outb %al, $97; \
- outb %al, $0x80; \
- movb $-74, %al; \
- outb %al, $67; \
- outb %al, $0x80; \
- movb $-119, %al; \
- outb %al, $66; \
- outb %al, $0x80; \
- movb $15, %al; \
- outb %al, $66;
-
-ALIGN
- .align 4096
-ENTRY(wakeup_start)
-wakeup_code:
- wakeup_code_start = .
- .code16
-
- cli
- cld
-
- # setup data segment
- movw %cs, %ax
- movw %ax, %ds # Make ds:0 point to wakeup_start
- movw %ax, %ss
-
- testl $4, realmode_flags - wakeup_code
- jz 1f
- BEEP
-1:
- mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board
-
- pushl $0 # Kill any dangerous flags
- popfl
-
- movl real_magic - wakeup_code, %eax
- cmpl $0x12345678, %eax
- jne bogus_real_magic
-
- testl $1, realmode_flags - wakeup_code
- jz 1f
- lcall $0xc000,$3
- movw %cs, %ax
- movw %ax, %ds # Bios might have played with that
- movw %ax, %ss
-1:
-
- testl $2, realmode_flags - wakeup_code
- jz 1f
- mov video_mode - wakeup_code, %ax
- call mode_set
-1:
-
- # set up page table
- movl $swsusp_pg_dir-__PAGE_OFFSET, %eax
- movl %eax, %cr3
-
- testl $1, real_efer_save_restore - wakeup_code
- jz 4f
- # restore efer setting
- movl real_save_efer_edx - wakeup_code, %edx
- movl real_save_efer_eax - wakeup_code, %eax
- mov $0xc0000080, %ecx
- wrmsr
-4:
- # make sure %cr4 is set correctly (features, etc)
- movl real_save_cr4 - wakeup_code, %eax
- movl %eax, %cr4
-
- # need a gdt -- use lgdtl to force 32-bit operands, in case
- # the GDT is located past 16 megabytes.
- lgdtl real_save_gdt - wakeup_code
-
- movl real_save_cr0 - wakeup_code, %eax
- movl %eax, %cr0
- jmp 1f
-1:
- movl real_magic - wakeup_code, %eax
- cmpl $0x12345678, %eax
- jne bogus_real_magic
-
- testl $8, realmode_flags - wakeup_code
- jz 1f
- BEEP
-1:
- ljmpl $__KERNEL_CS, $wakeup_pmode_return
-
-real_save_gdt: .word 0
- .long 0
-real_save_cr0: .long 0
-real_save_cr3: .long 0
-real_save_cr4: .long 0
-real_magic: .long 0
-video_mode: .long 0
-realmode_flags: .long 0
-real_efer_save_restore: .long 0
-real_save_efer_edx: .long 0
-real_save_efer_eax: .long 0
-
-bogus_real_magic:
- jmp bogus_real_magic
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- * NORMAL_VGA (-1)
- * EXTENDED_VGA (-2)
- * ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-# Setting of user mode (AX=mode ID) => CF=success
-
-# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
-# modes, we should probably compile in the video code from the boot
-# directory.
-mode_set:
- movw %ax, %bx
- subb $VIDEO_FIRST_VESA>>8, %bh
- cmpb $2, %bh
- jb check_vesa
-
-setbad:
- clc
- ret
-
-check_vesa:
- orw $0x4000, %bx # Use linear frame buffer
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz setbad # AH=0 if OK
-
- stc
- ret
+# Copyright 2003, 2008 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
.code32
ALIGN
-.org 0x800
-wakeup_stack_begin: # Stack grows down
-
-.org 0xff0 # Just below end of page
-wakeup_stack:
-ENTRY(wakeup_end)
-
-.org 0x1000
-
+ENTRY(wakeup_pmode_return)
wakeup_pmode_return:
movw $__KERNEL_DS, %ax
movw %ax, %ss
@@ -187,7 +21,7 @@
lgdt saved_gdt
lidt saved_idt
lldt saved_ldt
- ljmp $(__KERNEL_CS),$1f
+ ljmp $(__KERNEL_CS), $1f
1:
movl %cr3, %eax
movl %eax, %cr3
@@ -201,82 +35,41 @@
jne bogus_magic
# jump to place where we left off
- movl saved_eip,%eax
+ movl saved_eip, %eax
jmp *%eax
bogus_magic:
jmp bogus_magic
-##
-# acpi_copy_wakeup_routine
-#
-# Copy the above routine to low memory.
-#
-# Parameters:
-# %eax: place to copy wakeup routine to
-#
-# Returned address is location of code in low memory (past data and stack)
-#
-ENTRY(acpi_copy_wakeup_routine)
- pushl %ebx
+save_registers:
sgdt saved_gdt
sidt saved_idt
sldt saved_ldt
str saved_tss
- movl nx_enabled, %edx
- movl %edx, real_efer_save_restore - wakeup_start (%eax)
- testl $1, real_efer_save_restore - wakeup_start (%eax)
- jz 2f
- # save efer setting
- pushl %eax
- movl %eax, %ebx
- mov $0xc0000080, %ecx
- rdmsr
- movl %edx, real_save_efer_edx - wakeup_start (%ebx)
- movl %eax, real_save_efer_eax - wakeup_start (%ebx)
- popl %eax
-2:
-
- movl %cr3, %edx
- movl %edx, real_save_cr3 - wakeup_start (%eax)
- movl %cr4, %edx
- movl %edx, real_save_cr4 - wakeup_start (%eax)
- movl %cr0, %edx
- movl %edx, real_save_cr0 - wakeup_start (%eax)
- sgdt real_save_gdt - wakeup_start (%eax)
-
- movl saved_videomode, %edx
- movl %edx, video_mode - wakeup_start (%eax)
- movl acpi_realmode_flags, %edx
- movl %edx, realmode_flags - wakeup_start (%eax)
- movl $0x12345678, real_magic - wakeup_start (%eax)
- movl $0x12345678, saved_magic
- popl %ebx
- ret
-
-save_registers:
leal 4(%esp), %eax
movl %eax, saved_context_esp
- movl %ebx, saved_context_ebx
- movl %ebp, saved_context_ebp
- movl %esi, saved_context_esi
- movl %edi, saved_context_edi
- pushfl ; popl saved_context_eflags
+ movl %ebx, saved_context_ebx
+ movl %ebp, saved_context_ebp
+ movl %esi, saved_context_esi
+ movl %edi, saved_context_edi
+ pushfl
+ popl saved_context_eflags
- movl $ret_point, saved_eip
+ movl $ret_point, saved_eip
ret
restore_registers:
- movl saved_context_ebp, %ebp
- movl saved_context_ebx, %ebx
- movl saved_context_esi, %esi
- movl saved_context_edi, %edi
- pushl saved_context_eflags ; popfl
- ret
+ movl saved_context_ebp, %ebp
+ movl saved_context_ebx, %ebx
+ movl saved_context_esi, %esi
+ movl saved_context_edi, %edi
+ pushl saved_context_eflags
+ popfl
+ ret
ENTRY(do_suspend_lowlevel)
call save_processor_state
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index 2e1b9e0..bcc2934 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -7,191 +7,18 @@
#include <asm/asm-offsets.h>
# Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
-#
-# wakeup_code runs in real mode, and at unknown address (determined at run-time).
-# Therefore it must only use relative jumps/calls.
-#
-# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
-#
-# If physical address of wakeup_code is 0x12345, BIOS should call us with
-# cs = 0x1234, eip = 0x05
-#
-
-#define BEEP \
- inb $97, %al; \
- outb %al, $0x80; \
- movb $3, %al; \
- outb %al, $97; \
- outb %al, $0x80; \
- movb $-74, %al; \
- outb %al, $67; \
- outb %al, $0x80; \
- movb $-119, %al; \
- outb %al, $66; \
- outb %al, $0x80; \
- movb $15, %al; \
- outb %al, $66;
-
-
-ALIGN
- .align 16
-ENTRY(wakeup_start)
-wakeup_code:
- wakeup_code_start = .
- .code16
-
-# Running in *copy* of this code, somewhere in low 1MB.
-
- cli
- cld
- # setup data segment
- movw %cs, %ax
- movw %ax, %ds # Make ds:0 point to wakeup_start
- movw %ax, %ss
-
- # Data segment must be set up before we can see whether to beep.
- testl $4, realmode_flags - wakeup_code
- jz 1f
- BEEP
-1:
-
- # Private stack is needed for ASUS board
- mov $(wakeup_stack - wakeup_code), %sp
-
- pushl $0 # Kill any dangerous flags
- popfl
-
- movl real_magic - wakeup_code, %eax
- cmpl $0x12345678, %eax
- jne bogus_real_magic
-
- testl $1, realmode_flags - wakeup_code
- jz 1f
- lcall $0xc000,$3
- movw %cs, %ax
- movw %ax, %ds # Bios might have played with that
- movw %ax, %ss
-1:
-
- testl $2, realmode_flags - wakeup_code
- jz 1f
- mov video_mode - wakeup_code, %ax
- call mode_set
-1:
-
- mov %ds, %ax # Find 32bit wakeup_code addr
- movzx %ax, %esi # (Convert %ds:gdt to a liner ptr)
- shll $4, %esi
- # Fix up the vectors
- addl %esi, wakeup_32_vector - wakeup_code
- addl %esi, wakeup_long64_vector - wakeup_code
- addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer
-
- lidtl %ds:idt_48a - wakeup_code
- lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is
- # appropriate
-
- movl $1, %eax # protected mode (PE) bit
- lmsw %ax # This is it!
- jmp 1f
-1:
-
- ljmpl *(wakeup_32_vector - wakeup_code)
-
- .balign 4
-wakeup_32_vector:
- .long wakeup_32 - wakeup_code
- .word __KERNEL32_CS, 0
-
- .code32
-wakeup_32:
-# Running in this code, but at low address; paging is not yet turned on.
-
- movl $__KERNEL_DS, %eax
- movl %eax, %ds
-
- /*
- * Prepare for entering 64bits mode
- */
-
- /* Enable PAE */
- xorl %eax, %eax
- btsl $5, %eax
- movl %eax, %cr4
-
- /* Setup early boot stage 4 level pagetables */
- leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax
- movl %eax, %cr3
-
- /* Check if nx is implemented */
- movl $0x80000001, %eax
- cpuid
- movl %edx,%edi
-
- /* Enable Long Mode */
- xorl %eax, %eax
- btsl $_EFER_LME, %eax
-
- /* No Execute supported? */
- btl $20,%edi
- jnc 1f
- btsl $_EFER_NX, %eax
-
- /* Make changes effective */
-1: movl $MSR_EFER, %ecx
- xorl %edx, %edx
- wrmsr
-
- xorl %eax, %eax
- btsl $31, %eax /* Enable paging and in turn activate Long Mode */
- btsl $0, %eax /* Enable protected mode */
-
- /* Make changes effective */
- movl %eax, %cr0
-
- /* At this point:
- CR4.PAE must be 1
- CS.L must be 0
- CR3 must point to PML4
- Next instruction must be a branch
- This must be on identity-mapped page
- */
- /*
- * At this point we're in long mode but in 32bit compatibility mode
- * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
- * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load
- * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
- */
-
- /* Finally jump in 64bit mode */
- ljmp *(wakeup_long64_vector - wakeup_code)(%esi)
-
- .balign 4
-wakeup_long64_vector:
- .long wakeup_long64 - wakeup_code
- .word __KERNEL_CS, 0
.code64
-
- /* Hooray, we are in Long 64-bit mode (but still running in
- * low memory)
- */
-wakeup_long64:
/*
- * We must switch to a new descriptor in kernel space for the GDT
- * because soon the kernel won't have access anymore to the userspace
- * addresses where we're currently running on. We have to do that here
- * because in 32bit we couldn't load a 64bit linear address.
+ * Hooray, we are in Long 64-bit mode (but still running in low memory)
*/
- lgdt cpu_gdt_descr
+ENTRY(wakeup_long64)
+wakeup_long64:
+ movq saved_magic, %rax
+ movq $0x123456789abcdef0, %rdx
+ cmpq %rdx, %rax
+ jne bogus_64_magic
- movq saved_magic, %rax
- movq $0x123456789abcdef0, %rdx
- cmpq %rdx, %rax
- jne bogus_64_magic
-
- nop
- nop
movw $__KERNEL_DS, %ax
movw %ax, %ss
movw %ax, %ds
@@ -208,130 +35,8 @@
movq saved_rip, %rax
jmp *%rax
-.code32
-
- .align 64
-gdta:
- /* Its good to keep gdt in sync with one in trampoline.S */
- .word 0, 0, 0, 0 # dummy
- /* ??? Why I need the accessed bit set in order for this to work? */
- .quad 0x00cf9b000000ffff # __KERNEL32_CS
- .quad 0x00af9b000000ffff # __KERNEL_CS
- .quad 0x00cf93000000ffff # __KERNEL_DS
-
-idt_48a:
- .word 0 # idt limit = 0
- .word 0, 0 # idt base = 0L
-
-gdt_48a:
- .word 0x800 # gdt limit=2048,
- # 256 GDT entries
- .long gdta - wakeup_code # gdt base (relocated in later)
-
-real_magic: .quad 0
-video_mode: .quad 0
-realmode_flags: .quad 0
-
-.code16
-bogus_real_magic:
- jmp bogus_real_magic
-
-.code64
bogus_64_magic:
- jmp bogus_64_magic
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- * NORMAL_VGA (-1)
- * EXTENDED_VGA (-2)
- * ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-# Setting of user mode (AX=mode ID) => CF=success
-
-# For now, we only handle VESA modes (0x0200..0x03ff). To handle other
-# modes, we should probably compile in the video code from the boot
-# directory.
-.code16
-mode_set:
- movw %ax, %bx
- subb $VIDEO_FIRST_VESA>>8, %bh
- cmpb $2, %bh
- jb check_vesa
-
-setbad:
- clc
- ret
-
-check_vesa:
- orw $0x4000, %bx # Use linear frame buffer
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz setbad # AH=0 if OK
-
- stc
- ret
-
-wakeup_stack_begin: # Stack grows down
-
-.org 0xff0
-wakeup_stack: # Just below end of page
-
-.org 0x1000
-ENTRY(wakeup_level4_pgt)
- .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
- .fill 510,8,0
- /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
- .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
-
-ENTRY(wakeup_end)
-
-##
-# acpi_copy_wakeup_routine
-#
-# Copy the above routine to low memory.
-#
-# Parameters:
-# %rdi: place to copy wakeup routine to
-#
-# Returned address is location of code in low memory (past data and stack)
-#
- .code64
-ENTRY(acpi_copy_wakeup_routine)
- pushq %rax
- pushq %rdx
-
- movl saved_video_mode, %edx
- movl %edx, video_mode - wakeup_start (,%rdi)
- movl acpi_realmode_flags, %edx
- movl %edx, realmode_flags - wakeup_start (,%rdi)
- movq $0x12345678, real_magic - wakeup_start (,%rdi)
- movq $0x123456789abcdef0, %rdx
- movq %rdx, saved_magic
-
- movq saved_magic, %rax
- movq $0x123456789abcdef0, %rdx
- cmpq %rdx, %rax
- jne bogus_64_magic
-
- # restore the regs we used
- popq %rdx
- popq %rax
-ENTRY(do_suspend_lowlevel_s4bios)
- ret
+ jmp bogus_64_magic
.align 2
.p2align 4,,15
@@ -414,7 +119,7 @@
jmp restore_processor_state
.LFE5:
.Lfe5:
- .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel
+ .size do_suspend_lowlevel, .Lfe5-do_suspend_lowlevel
.data
ALIGN
diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S
new file mode 100644
index 0000000..6ff3b57
--- /dev/null
+++ b/arch/x86/kernel/acpi/wakeup_rm.S
@@ -0,0 +1,10 @@
+/*
+ * Wrapper script for the realmode binary as a transport object
+ * before copying to low memory.
+ */
+ .section ".rodata","a"
+ .globl wakeup_code_start, wakeup_code_end
+wakeup_code_start:
+ .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin"
+wakeup_code_end:
+ .size wakeup_code_start, .-wakeup_code_start
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 45d79ea..df4099d 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -11,6 +11,8 @@
#include <asm/mce.h>
#include <asm/nmi.h>
#include <asm/vsyscall.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
#define MAX_PATCH_LEN (255-1)
@@ -65,7 +67,8 @@
get them easily into strings. */
asm("\t.section .rodata, \"a\"\nintelnops: "
GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
- GENERIC_NOP7 GENERIC_NOP8);
+ GENERIC_NOP7 GENERIC_NOP8
+ "\t.previous");
extern const unsigned char intelnops[];
static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
NULL,
@@ -83,7 +86,8 @@
#ifdef K8_NOP1
asm("\t.section .rodata, \"a\"\nk8nops: "
K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
- K8_NOP7 K8_NOP8);
+ K8_NOP7 K8_NOP8
+ "\t.previous");
extern const unsigned char k8nops[];
static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
NULL,
@@ -101,7 +105,8 @@
#ifdef K7_NOP1
asm("\t.section .rodata, \"a\"\nk7nops: "
K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
- K7_NOP7 K7_NOP8);
+ K7_NOP7 K7_NOP8
+ "\t.previous");
extern const unsigned char k7nops[];
static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
NULL,
@@ -119,7 +124,8 @@
#ifdef P6_NOP1
asm("\t.section .rodata, \"a\"\np6nops: "
P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6
- P6_NOP7 P6_NOP8);
+ P6_NOP7 P6_NOP8
+ "\t.previous");
extern const unsigned char p6nops[];
static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
NULL,
@@ -173,7 +179,7 @@
#endif /* CONFIG_X86_64 */
/* Use this to add nops to a buffer, then text_poke the whole buffer. */
-static void add_nops(void *insns, unsigned int len)
+void add_nops(void *insns, unsigned int len)
{
const unsigned char *const *noptable = find_nop_table();
@@ -186,6 +192,7 @@
len -= noplen;
}
}
+EXPORT_SYMBOL_GPL(add_nops);
extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
extern u8 *__smp_locks[], *__smp_locks_end[];
@@ -201,7 +208,7 @@
struct alt_instr *a;
char insnbuf[MAX_PATCH_LEN];
- DPRINTK("%s: alt table %p -> %p\n", __FUNCTION__, start, end);
+ DPRINTK("%s: alt table %p -> %p\n", __func__, start, end);
for (a = start; a < end; a++) {
u8 *instr = a->instr;
BUG_ON(a->replacementlen > a->instrlen);
@@ -213,13 +220,13 @@
if (instr >= (u8 *)VSYSCALL_START && instr < (u8*)VSYSCALL_END) {
instr = __va(instr - (u8*)VSYSCALL_START + (u8*)__pa_symbol(&__vsyscall_0));
DPRINTK("%s: vsyscall fixup: %p => %p\n",
- __FUNCTION__, a->instr, instr);
+ __func__, a->instr, instr);
}
#endif
memcpy(insnbuf, a->replacement, a->replacementlen);
add_nops(insnbuf + a->replacementlen,
a->instrlen - a->replacementlen);
- text_poke(instr, insnbuf, a->instrlen);
+ text_poke_early(instr, insnbuf, a->instrlen);
}
}
@@ -280,7 +287,6 @@
void *text, void *text_end)
{
struct smp_alt_module *smp;
- unsigned long flags;
if (noreplace_smp)
return;
@@ -303,42 +309,40 @@
smp->text = text;
smp->text_end = text_end;
DPRINTK("%s: locks %p -> %p, text %p -> %p, name %s\n",
- __FUNCTION__, smp->locks, smp->locks_end,
+ __func__, smp->locks, smp->locks_end,
smp->text, smp->text_end, smp->name);
- spin_lock_irqsave(&smp_alt, flags);
+ spin_lock(&smp_alt);
list_add_tail(&smp->next, &smp_alt_modules);
if (boot_cpu_has(X86_FEATURE_UP))
alternatives_smp_unlock(smp->locks, smp->locks_end,
smp->text, smp->text_end);
- spin_unlock_irqrestore(&smp_alt, flags);
+ spin_unlock(&smp_alt);
}
void alternatives_smp_module_del(struct module *mod)
{
struct smp_alt_module *item;
- unsigned long flags;
if (smp_alt_once || noreplace_smp)
return;
- spin_lock_irqsave(&smp_alt, flags);
+ spin_lock(&smp_alt);
list_for_each_entry(item, &smp_alt_modules, next) {
if (mod != item->mod)
continue;
list_del(&item->next);
- spin_unlock_irqrestore(&smp_alt, flags);
- DPRINTK("%s: %s\n", __FUNCTION__, item->name);
+ spin_unlock(&smp_alt);
+ DPRINTK("%s: %s\n", __func__, item->name);
kfree(item);
return;
}
- spin_unlock_irqrestore(&smp_alt, flags);
+ spin_unlock(&smp_alt);
}
void alternatives_smp_switch(int smp)
{
struct smp_alt_module *mod;
- unsigned long flags;
#ifdef CONFIG_LOCKDEP
/*
@@ -355,7 +359,7 @@
return;
BUG_ON(!smp && (num_online_cpus() > 1));
- spin_lock_irqsave(&smp_alt, flags);
+ spin_lock(&smp_alt);
/*
* Avoid unnecessary switches because it forces JIT based VMs to
@@ -379,7 +383,7 @@
mod->text, mod->text_end);
}
smp_mode = smp;
- spin_unlock_irqrestore(&smp_alt, flags);
+ spin_unlock(&smp_alt);
}
#endif
@@ -407,7 +411,7 @@
/* Pad the rest with nops */
add_nops(insnbuf + used, p->len - used);
- text_poke(p->instr, insnbuf, p->len);
+ text_poke_early(p->instr, insnbuf, p->len);
}
}
extern struct paravirt_patch_site __start_parainstructions[],
@@ -416,8 +420,6 @@
void __init alternative_instructions(void)
{
- unsigned long flags;
-
/* The patching is not fully atomic, so try to avoid local interruptions
that might execute the to be patched code.
Other CPUs are not running. */
@@ -426,7 +428,6 @@
stop_mce();
#endif
- local_irq_save(flags);
apply_alternatives(__alt_instructions, __alt_instructions_end);
/* switch to patch-once-at-boottime-only mode and free the
@@ -458,7 +459,6 @@
}
#endif
apply_paravirt(__parainstructions, __parainstructions_end);
- local_irq_restore(flags);
if (smp_alt_once)
free_init_pages("SMP alternatives",
@@ -471,18 +471,71 @@
#endif
}
-/*
- * Warning:
+/**
+ * text_poke_early - Update instructions on a live kernel at boot time
+ * @addr: address to modify
+ * @opcode: source of the copy
+ * @len: length to copy
+ *
* When you use this code to patch more than one byte of an instruction
* you need to make sure that other CPUs cannot execute this code in parallel.
- * Also no thread must be currently preempted in the middle of these instructions.
- * And on the local CPU you need to be protected again NMI or MCE handlers
- * seeing an inconsistent instruction while you patch.
+ * Also no thread must be currently preempted in the middle of these
+ * instructions. And on the local CPU you need to be protected again NMI or MCE
+ * handlers seeing an inconsistent instruction while you patch.
*/
-void __kprobes text_poke(void *addr, unsigned char *opcode, int len)
+void *text_poke_early(void *addr, const void *opcode, size_t len)
{
+ unsigned long flags;
+ local_irq_save(flags);
memcpy(addr, opcode, len);
+ local_irq_restore(flags);
sync_core();
/* Could also do a CLFLUSH here to speed up CPU recovery; but
that causes hangs on some VIA CPUs. */
+ return addr;
+}
+
+/**
+ * text_poke - Update instructions on a live kernel
+ * @addr: address to modify
+ * @opcode: source of the copy
+ * @len: length to copy
+ *
+ * Only atomic text poke/set should be allowed when not doing early patching.
+ * It means the size must be writable atomically and the address must be aligned
+ * in a way that permits an atomic write. It also makes sure we fit on a single
+ * page.
+ */
+void *__kprobes text_poke(void *addr, const void *opcode, size_t len)
+{
+ unsigned long flags;
+ char *vaddr;
+ int nr_pages = 2;
+
+ BUG_ON(len > sizeof(long));
+ BUG_ON((((long)addr + len - 1) & ~(sizeof(long) - 1))
+ - ((long)addr & ~(sizeof(long) - 1)));
+ if (kernel_text_address((unsigned long)addr)) {
+ struct page *pages[2] = { virt_to_page(addr),
+ virt_to_page(addr + PAGE_SIZE) };
+ if (!pages[1])
+ nr_pages = 1;
+ vaddr = vmap(pages, nr_pages, VM_MAP, PAGE_KERNEL);
+ BUG_ON(!vaddr);
+ local_irq_save(flags);
+ memcpy(&vaddr[(unsigned long)addr & ~PAGE_MASK], opcode, len);
+ local_irq_restore(flags);
+ vunmap(vaddr);
+ } else {
+ /*
+ * modules are in vmalloc'ed memory, always writable.
+ */
+ local_irq_save(flags);
+ memcpy(addr, opcode, len);
+ local_irq_restore(flags);
+ }
+ sync_core();
+ /* Could also do a CLFLUSH here to speed up CPU recovery; but
+ that causes hangs on some VIA CPUs. */
+ return addr;
}
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 00df126..479926d 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -27,11 +27,11 @@
#include <asm/k8.h>
int gart_iommu_aperture;
-int gart_iommu_aperture_disabled __initdata = 0;
-int gart_iommu_aperture_allowed __initdata = 0;
+int gart_iommu_aperture_disabled __initdata;
+int gart_iommu_aperture_allowed __initdata;
int fallback_aper_order __initdata = 1; /* 64MB */
-int fallback_aper_force __initdata = 0;
+int fallback_aper_force __initdata;
int fix_aperture __initdata = 1;
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 35a568e..6872081 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -50,6 +50,11 @@
# error SPURIOUS_APIC_VECTOR definition error
#endif
+unsigned long mp_lapic_addr;
+
+DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
+EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
+
/*
* Knob to control our willingness to enable the local APIC.
*
@@ -621,6 +626,35 @@
}
/*
+ * Setup extended LVT, AMD specific (K8, family 10h)
+ *
+ * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
+ * MCE interrupts are supported. Thus MCE offset must be set to 0.
+ */
+
+#define APIC_EILVT_LVTOFF_MCE 0
+#define APIC_EILVT_LVTOFF_IBS 1
+
+static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
+{
+ unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+ unsigned int v = (mask << 16) | (msg_type << 8) | vector;
+ apic_write(reg, v);
+}
+
+u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
+{
+ setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
+ return APIC_EILVT_LVTOFF_MCE;
+}
+
+u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
+{
+ setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
+ return APIC_EILVT_LVTOFF_IBS;
+}
+
+/*
* Local APIC start and shutdown
*/
@@ -868,12 +902,50 @@
apic_write_around(APIC_LVT1, value);
}
+void __cpuinit lapic_setup_esr(void)
+{
+ unsigned long oldvalue, value, maxlvt;
+ if (lapic_is_integrated() && !esr_disable) {
+ /* !82489DX */
+ maxlvt = lapic_get_maxlvt();
+ if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
+ apic_write(APIC_ESR, 0);
+ oldvalue = apic_read(APIC_ESR);
+
+ /* enables sending errors */
+ value = ERROR_APIC_VECTOR;
+ apic_write_around(APIC_LVTERR, value);
+ /*
+ * spec says clear errors after enabling vector.
+ */
+ if (maxlvt > 3)
+ apic_write(APIC_ESR, 0);
+ value = apic_read(APIC_ESR);
+ if (value != oldvalue)
+ apic_printk(APIC_VERBOSE, "ESR value before enabling "
+ "vector: 0x%08lx after: 0x%08lx\n",
+ oldvalue, value);
+ } else {
+ if (esr_disable)
+ /*
+ * Something untraceable is creating bad interrupts on
+ * secondary quads ... for the moment, just leave the
+ * ESR disabled - we can't do anything useful with the
+ * errors anyway - mbligh
+ */
+ printk(KERN_INFO "Leaving ESR disabled.\n");
+ else
+ printk(KERN_INFO "No ESR for 82489DX.\n");
+ }
+}
+
+
/**
* setup_local_APIC - setup the local APIC
*/
void __cpuinit setup_local_APIC(void)
{
- unsigned long oldvalue, value, maxlvt, integrated;
+ unsigned long value, integrated;
int i, j;
/* Pound the ESR really hard over the head with a big hammer - mbligh */
@@ -997,40 +1069,13 @@
if (!integrated) /* 82489DX */
value |= APIC_LVT_LEVEL_TRIGGER;
apic_write_around(APIC_LVT1, value);
+}
- if (integrated && !esr_disable) {
- /* !82489DX */
- maxlvt = lapic_get_maxlvt();
- if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
- apic_write(APIC_ESR, 0);
- oldvalue = apic_read(APIC_ESR);
+void __cpuinit end_local_APIC_setup(void)
+{
+ unsigned long value;
- /* enables sending errors */
- value = ERROR_APIC_VECTOR;
- apic_write_around(APIC_LVTERR, value);
- /*
- * spec says clear errors after enabling vector.
- */
- if (maxlvt > 3)
- apic_write(APIC_ESR, 0);
- value = apic_read(APIC_ESR);
- if (value != oldvalue)
- apic_printk(APIC_VERBOSE, "ESR value before enabling "
- "vector: 0x%08lx after: 0x%08lx\n",
- oldvalue, value);
- } else {
- if (esr_disable)
- /*
- * Something untraceable is creating bad interrupts on
- * secondary quads ... for the moment, just leave the
- * ESR disabled - we can't do anything useful with the
- * errors anyway - mbligh
- */
- printk(KERN_INFO "Leaving ESR disabled.\n");
- else
- printk(KERN_INFO "No ESR for 82489DX.\n");
- }
-
+ lapic_setup_esr();
/* Disable the local apic timer */
value = apic_read(APIC_LVTT);
value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
@@ -1147,7 +1192,7 @@
* default configuration (or the MP table is broken).
*/
if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+ boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
#ifdef CONFIG_X86_IO_APIC
{
@@ -1185,6 +1230,9 @@
* This initializes the IO-APIC and APIC hardware if this is
* a UP kernel.
*/
+
+int apic_version[MAX_APICS];
+
int __init APIC_init_uniprocessor(void)
{
if (enable_local_apic < 0)
@@ -1214,12 +1262,13 @@
* might be zero if read from MP tables. Get it from LAPIC.
*/
#ifdef CONFIG_CRASH_DUMP
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+ boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
#endif
phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
setup_local_APIC();
+ end_local_APIC_setup();
#ifdef CONFIG_X86_IO_APIC
if (smp_found_config)
if (!skip_ioapic_setup && nr_ioapics)
@@ -1288,6 +1337,29 @@
irq_exit();
}
+#ifdef CONFIG_SMP
+void __init smp_intr_init(void)
+{
+ /*
+ * IRQ0 must be given a fixed assignment and initialized,
+ * because it's used before the IO-APIC is set up.
+ */
+ set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+
+ /*
+ * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+ * IPI, driven by wakeup.
+ */
+ set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+ /* IPI for invalidation */
+ set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+
+ /* IPI for generic function call */
+ set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+}
+#endif
+
/*
* Initialize APIC interrupts
*/
@@ -1394,6 +1466,88 @@
}
}
+unsigned int __cpuinitdata maxcpus = NR_CPUS;
+
+void __cpuinit generic_processor_info(int apicid, int version)
+{
+ int cpu;
+ cpumask_t tmp_map;
+ physid_mask_t phys_cpu;
+
+ /*
+ * Validate version
+ */
+ if (version == 0x0) {
+ printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
+ "fixing up to 0x10. (tell your hw vendor)\n",
+ version);
+ version = 0x10;
+ }
+ apic_version[apicid] = version;
+
+ phys_cpu = apicid_to_cpu_present(apicid);
+ physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
+ if (num_processors >= NR_CPUS) {
+ printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+ " Processor ignored.\n", NR_CPUS);
+ return;
+ }
+
+ if (num_processors >= maxcpus) {
+ printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+ " Processor ignored.\n", maxcpus);
+ return;
+ }
+
+ num_processors++;
+ cpus_complement(tmp_map, cpu_present_map);
+ cpu = first_cpu(tmp_map);
+
+ if (apicid == boot_cpu_physical_apicid)
+ /*
+ * x86_bios_cpu_apicid is required to have processors listed
+ * in same order as logical cpu numbers. Hence the first
+ * entry is BSP, and so on.
+ */
+ cpu = 0;
+
+ /*
+ * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+ * but we need to work other dependencies like SMP_SUSPEND etc
+ * before this can be done without some confusion.
+ * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+ * - Ashok Raj <ashok.raj@intel.com>
+ */
+ if (num_processors > 8) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_INTEL:
+ if (!APIC_XAPIC(version)) {
+ def_to_bigsmp = 0;
+ break;
+ }
+ /* If P4 and above fall through */
+ case X86_VENDOR_AMD:
+ def_to_bigsmp = 1;
+ }
+ }
+#ifdef CONFIG_SMP
+ /* are we being called early in kernel startup? */
+ if (x86_cpu_to_apicid_early_ptr) {
+ u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
+ u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+
+ cpu_to_apicid[cpu] = apicid;
+ bios_cpu_apicid[cpu] = apicid;
+ } else {
+ per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+ per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
+ }
+#endif
+ cpu_set(cpu, cpu_possible_map);
+ cpu_set(cpu, cpu_present_map);
+}
+
/*
* Power management
*/
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index d8d03e0..9e8e5c0 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -34,13 +34,15 @@
#include <asm/mpspec.h>
#include <asm/hpet.h>
#include <asm/pgalloc.h>
-#include <asm/mach_apic.h>
#include <asm/nmi.h>
#include <asm/idle.h>
#include <asm/proto.h>
#include <asm/timex.h>
#include <asm/apic.h>
+#include <mach_ipi.h>
+#include <mach_apic.h>
+
int disable_apic_timer __cpuinitdata;
static int apic_calibrate_pmtmr __initdata;
int disable_apic;
@@ -83,6 +85,12 @@
static unsigned long apic_phys;
+unsigned long mp_lapic_addr;
+
+DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
+EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
+
+unsigned int __cpuinitdata maxcpus = NR_CPUS;
/*
* Get the LAPIC version
*/
@@ -431,7 +439,8 @@
lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY;
local_irq_enable();
- clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, &boot_cpu_id);
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
+ &boot_cpu_physical_apicid);
local_irq_disable();
}
@@ -640,10 +649,10 @@
/*
* The ID register is read/write in a real APIC.
*/
- reg0 = apic_read(APIC_ID);
+ reg0 = read_apic_id();
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
- reg1 = apic_read(APIC_ID);
+ reg1 = read_apic_id();
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
apic_write(APIC_ID, reg0);
if (reg1 != (reg0 ^ APIC_ID_MASK))
@@ -728,6 +737,7 @@
unsigned int value;
int i, j;
+ preempt_disable();
value = apic_read(APIC_LVR);
BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f);
@@ -821,6 +831,7 @@
else
value = APIC_DM_NMI | APIC_LVT_MASKED;
apic_write(APIC_LVT1, value);
+ preempt_enable();
}
void __cpuinit lapic_setup_esr(void)
@@ -857,10 +868,34 @@
}
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
- boot_cpu_id = 0;
+ boot_cpu_physical_apicid = 0;
return 0;
}
+void __init early_init_lapic_mapping(void)
+{
+ unsigned long apic_phys;
+
+ /*
+ * If no local APIC can be found then go out
+ * : it means there is no mpatable and MADT
+ */
+ if (!smp_found_config)
+ return;
+
+ apic_phys = mp_lapic_addr;
+
+ set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+ apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
+ APIC_BASE, apic_phys);
+
+ /*
+ * Fetch the APIC ID of the BSP in case we have a
+ * default configuration (or the MP table is broken).
+ */
+ boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+}
+
/**
* init_apic_mappings - initialize APIC mappings
*/
@@ -881,16 +916,11 @@
apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
APIC_BASE, apic_phys);
- /* Put local APIC into the resource map. */
- lapic_resource.start = apic_phys;
- lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
- insert_resource(&iomem_resource, &lapic_resource);
-
/*
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
- boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
+ boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
}
/*
@@ -911,8 +941,8 @@
verify_local_APIC();
- phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id);
- apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id));
+ phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+ apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
setup_local_APIC();
@@ -1029,6 +1059,52 @@
apic_write(APIC_LVT1, value);
}
+void __cpuinit generic_processor_info(int apicid, int version)
+{
+ int cpu;
+ cpumask_t tmp_map;
+
+ if (num_processors >= NR_CPUS) {
+ printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+ " Processor ignored.\n", NR_CPUS);
+ return;
+ }
+
+ if (num_processors >= maxcpus) {
+ printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+ " Processor ignored.\n", maxcpus);
+ return;
+ }
+
+ num_processors++;
+ cpus_complement(tmp_map, cpu_present_map);
+ cpu = first_cpu(tmp_map);
+
+ physid_set(apicid, phys_cpu_present_map);
+ if (apicid == boot_cpu_physical_apicid) {
+ /*
+ * x86_bios_cpu_apicid is required to have processors listed
+ * in same order as logical cpu numbers. Hence the first
+ * entry is BSP, and so on.
+ */
+ cpu = 0;
+ }
+ /* are we being called early in kernel startup? */
+ if (x86_cpu_to_apicid_early_ptr) {
+ u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
+ u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+
+ cpu_to_apicid[cpu] = apicid;
+ bios_cpu_apicid[cpu] = apicid;
+ } else {
+ per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+ per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
+ }
+
+ cpu_set(cpu, cpu_possible_map);
+ cpu_set(cpu, cpu_present_map);
+}
+
/*
* Power management
*/
@@ -1065,7 +1141,7 @@
maxlvt = lapic_get_maxlvt();
- apic_pm_state.apic_id = apic_read(APIC_ID);
+ apic_pm_state.apic_id = read_apic_id();
apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
apic_pm_state.apic_ldr = apic_read(APIC_LDR);
apic_pm_state.apic_dfr = apic_read(APIC_DFR);
@@ -1180,9 +1256,19 @@
{
int i, clusters, zeros;
unsigned id;
- u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+ u16 *bios_cpu_apicid;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
+ /*
+ * there is not this kind of box with AMD CPU yet.
+ * Some AMD box with quadcore cpu and 8 sockets apicid
+ * will be [4, 0x23] or [8, 0x27] could be thought to
+ * vsmp box still need checking...
+ */
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
+ return 0;
+
+ bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
for (i = 0; i < NR_CPUS; i++) {
@@ -1219,6 +1305,12 @@
++zeros;
}
+ /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
+ * not guaranteed to be synced between boards
+ */
+ if (is_vsmp_box() && clusters > 1)
+ return 1;
+
/*
* If clusters > 2, then should be multi-chassis.
* May have to revisit this when multi-core + hyperthreaded CPUs come
@@ -1290,3 +1382,21 @@
}
__setup("apicpmtimer", setup_apicpmtimer);
+static int __init lapic_insert_resource(void)
+{
+ if (!apic_phys)
+ return -1;
+
+ /* Put local APIC into the resource map. */
+ lapic_resource.start = apic_phys;
+ lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+ insert_resource(&iomem_resource, &lapic_resource);
+
+ return 0;
+}
+
+/*
+ * need call insert after e820_reserve_resources()
+ * that is using request_resource
+ */
+late_initcall(lapic_insert_resource);
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index d4438ef..f0030a0 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -2217,7 +2217,6 @@
*/
static int __init apm_init(void)
{
- struct proc_dir_entry *apm_proc;
struct desc_struct *gdt;
int err;
@@ -2322,9 +2321,7 @@
set_base(gdt[APM_DS >> 3],
__va((unsigned long)apm_info.bios.dseg << 4));
- apm_proc = create_proc_entry("apm", 0, NULL);
- if (apm_proc)
- apm_proc->proc_fops = &apm_file_ops;
+ proc_create("apm", 0, NULL, &apm_file_ops);
kapmd_task = kthread_create(apm, NULL, "kapmd");
if (IS_ERR(kapmd_task)) {
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 8ea0401..670c3c3 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -10,7 +10,7 @@
#include <linux/personality.h>
#include <linux/suspend.h>
#include <asm/ucontext.h>
-#include "sigframe_32.h"
+#include "sigframe.h"
#include <asm/pgtable.h>
#include <asm/fixmap.h>
#include <asm/processor.h>
diff --git a/arch/x86/kernel/bugs_64.c b/arch/x86/kernel/bugs_64.c
index 8f520f9..9a3ed06 100644
--- a/arch/x86/kernel/bugs_64.c
+++ b/arch/x86/kernel/bugs_64.c
@@ -9,13 +9,25 @@
#include <asm/bugs.h>
#include <asm/processor.h>
#include <asm/mtrr.h>
+#include <asm/cacheflush.h>
void __init check_bugs(void)
{
- identify_cpu(&boot_cpu_data);
+ identify_boot_cpu();
#if !defined(CONFIG_SMP)
printk("CPU: ");
print_cpu_info(&boot_cpu_data);
#endif
alternative_instructions();
+
+ /*
+ * Make sure the first 2MB area is not mapped by huge pages
+ * There are typically fixed size MTRRs in there and overlapping
+ * MTRRs into large pages causes slow downs.
+ *
+ * Right now we don't do that with gbpages because there seems
+ * very little benefit for that case.
+ */
+ if (!direct_gbpages)
+ set_memory_4k((unsigned long)__va(0), 1);
}
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index a0c4d7c..ee7c452 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -3,9 +3,9 @@
#
obj-y := intel_cacheinfo.o addon_cpuid_features.o
-obj-y += feature_names.o
+obj-y += proc.o feature_names.o
-obj-$(CONFIG_X86_32) += common.o proc.o bugs.o
+obj-$(CONFIG_X86_32) += common.o bugs.o
obj-$(CONFIG_X86_32) += amd.o
obj-$(CONFIG_X86_32) += cyrix.o
obj-$(CONFIG_X86_32) += centaur.o
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 693e353..0173065 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -4,8 +4,8 @@
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/apic.h>
-#include <asm/mach_apic.h>
+#include <mach_apic.h>
#include "cpu.h"
/*
@@ -20,7 +20,7 @@
* the chip setting when fixing the bug but they also tweaked some
* performance at the same time..
*/
-
+
extern void vide(void);
__asm__(".align 4\nvide: ret");
@@ -63,12 +63,12 @@
int force_mwait __cpuinitdata;
-void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
{
if (cpuid_eax(0x80000000) >= 0x80000007) {
c->x86_power = cpuid_edx(0x80000007);
if (c->x86_power & (1<<8))
- set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
}
}
@@ -81,7 +81,8 @@
#ifdef CONFIG_SMP
unsigned long long value;
- /* Disable TLB flush filter by setting HWCR.FFDIS on K8
+ /*
+ * Disable TLB flush filter by setting HWCR.FFDIS on K8
* bit 6 of msr C001_0015
*
* Errata 63 for SH-B3 steppings
@@ -102,15 +103,16 @@
* no bus pipeline)
*/
- /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
- 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
- clear_bit(0*32+31, c->x86_capability);
-
+ /*
+ * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
+ */
+ clear_cpu_cap(c, 0*32+31);
+
r = get_model_name(c);
- switch(c->x86)
- {
- case 4:
+ switch (c->x86) {
+ case 4:
/*
* General Systems BIOSen alias the cpu frequency registers
* of the Elan at 0x000df000. Unfortuantly, one of the Linux
@@ -120,61 +122,60 @@
#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */
#define CBAR_ENB (0x80000000)
#define CBAR_KEY (0X000000CB)
- if (c->x86_model==9 || c->x86_model == 10) {
+ if (c->x86_model == 9 || c->x86_model == 10) {
if (inl (CBAR) & CBAR_ENB)
outl (0 | CBAR_KEY, CBAR);
}
break;
- case 5:
- if( c->x86_model < 6 )
- {
+ case 5:
+ if (c->x86_model < 6) {
/* Based on AMD doc 20734R - June 2000 */
- if ( c->x86_model == 0 ) {
- clear_bit(X86_FEATURE_APIC, c->x86_capability);
- set_bit(X86_FEATURE_PGE, c->x86_capability);
+ if (c->x86_model == 0) {
+ clear_cpu_cap(c, X86_FEATURE_APIC);
+ set_cpu_cap(c, X86_FEATURE_PGE);
}
break;
}
-
- if ( c->x86_model == 6 && c->x86_mask == 1 ) {
+
+ if (c->x86_model == 6 && c->x86_mask == 1) {
const int K6_BUG_LOOP = 1000000;
int n;
void (*f_vide)(void);
unsigned long d, d2;
-
+
printk(KERN_INFO "AMD K6 stepping B detected - ");
-
+
/*
- * It looks like AMD fixed the 2.6.2 bug and improved indirect
+ * It looks like AMD fixed the 2.6.2 bug and improved indirect
* calls at the same time.
*/
n = K6_BUG_LOOP;
f_vide = vide;
rdtscl(d);
- while (n--)
+ while (n--)
f_vide();
rdtscl(d2);
d = d2-d;
- if (d > 20*K6_BUG_LOOP)
+ if (d > 20*K6_BUG_LOOP)
printk("system stability may be impaired when more than 32 MB are used.\n");
- else
+ else
printk("probably OK (after B9730xxxx).\n");
printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
}
/* K6 with old style WHCR */
if (c->x86_model < 8 ||
- (c->x86_model== 8 && c->x86_mask < 8)) {
+ (c->x86_model == 8 && c->x86_mask < 8)) {
/* We can only write allocate on the low 508Mb */
- if(mbytes>508)
- mbytes=508;
+ if (mbytes > 508)
+ mbytes = 508;
rdmsr(MSR_K6_WHCR, l, h);
- if ((l&0x0000FFFF)==0) {
+ if ((l&0x0000FFFF) == 0) {
unsigned long flags;
- l=(1<<0)|((mbytes/4)<<1);
+ l = (1<<0)|((mbytes/4)<<1);
local_irq_save(flags);
wbinvd();
wrmsr(MSR_K6_WHCR, l, h);
@@ -185,17 +186,17 @@
break;
}
- if ((c->x86_model == 8 && c->x86_mask >7) ||
+ if ((c->x86_model == 8 && c->x86_mask > 7) ||
c->x86_model == 9 || c->x86_model == 13) {
/* The more serious chips .. */
- if(mbytes>4092)
- mbytes=4092;
+ if (mbytes > 4092)
+ mbytes = 4092;
rdmsr(MSR_K6_WHCR, l, h);
- if ((l&0xFFFF0000)==0) {
+ if ((l&0xFFFF0000) == 0) {
unsigned long flags;
- l=((mbytes>>2)<<22)|(1<<16);
+ l = ((mbytes>>2)<<22)|(1<<16);
local_irq_save(flags);
wbinvd();
wrmsr(MSR_K6_WHCR, l, h);
@@ -207,7 +208,7 @@
/* Set MTRR capability flag if appropriate */
if (c->x86_model == 13 || c->x86_model == 9 ||
(c->x86_model == 8 && c->x86_mask >= 8))
- set_bit(X86_FEATURE_K6_MTRR, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_K6_MTRR);
break;
}
@@ -217,10 +218,11 @@
break;
}
break;
- case 6: /* An Athlon/Duron */
-
- /* Bit 15 of Athlon specific MSR 15, needs to be 0
- * to enable SSE on Palomino/Morgan/Barton CPU's.
+ case 6: /* An Athlon/Duron */
+
+ /*
+ * Bit 15 of Athlon specific MSR 15, needs to be 0
+ * to enable SSE on Palomino/Morgan/Barton CPU's.
* If the BIOS didn't enable it already, enable it here.
*/
if (c->x86_model >= 6 && c->x86_model <= 10) {
@@ -229,15 +231,16 @@
rdmsr(MSR_K7_HWCR, l, h);
l &= ~0x00008000;
wrmsr(MSR_K7_HWCR, l, h);
- set_bit(X86_FEATURE_XMM, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_XMM);
}
}
- /* It's been determined by AMD that Athlons since model 8 stepping 1
+ /*
+ * It's been determined by AMD that Athlons since model 8 stepping 1
* are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
* As per AMD technical note 27212 0.2
*/
- if ((c->x86_model == 8 && c->x86_mask>=1) || (c->x86_model > 8)) {
+ if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
rdmsr(MSR_K7_CLK_CTL, l, h);
if ((l & 0xfff00000) != 0x20000000) {
printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
@@ -253,20 +256,19 @@
/* Use K8 tuning for Fam10h and Fam11h */
case 0x10:
case 0x11:
- set_bit(X86_FEATURE_K8, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_K8);
break;
case 6:
- set_bit(X86_FEATURE_K7, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_K7);
break;
}
if (c->x86 >= 6)
- set_bit(X86_FEATURE_FXSAVE_LEAK, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
display_cacheinfo(c);
- if (cpuid_eax(0x80000000) >= 0x80000008) {
+ if (cpuid_eax(0x80000000) >= 0x80000008)
c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
- }
#ifdef CONFIG_X86_HT
/*
@@ -302,20 +304,20 @@
/* K6s reports MCEs but don't actually have all the MSRs */
if (c->x86 < 6)
- clear_bit(X86_FEATURE_MCE, c->x86_capability);
+ clear_cpu_cap(c, X86_FEATURE_MCE);
if (cpu_has_xmm2)
- set_bit(X86_FEATURE_MFENCE_RDTSC, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
}
-static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
{
/* AMD errata T13 (order #21922) */
if ((c->x86 == 6)) {
if (c->x86_model == 3 && c->x86_mask == 0) /* Duron Rev A0 */
size = 64;
if (c->x86_model == 4 &&
- (c->x86_mask==0 || c->x86_mask==1)) /* Tbird rev A1/A2 */
+ (c->x86_mask == 0 || c->x86_mask == 1)) /* Tbird rev A1/A2 */
size = 256;
}
return size;
@@ -323,19 +325,20 @@
static struct cpu_dev amd_cpu_dev __cpuinitdata = {
.c_vendor = "AMD",
- .c_ident = { "AuthenticAMD" },
+ .c_ident = { "AuthenticAMD" },
.c_models = {
{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
{
[3] = "486 DX/2",
[7] = "486 DX/2-WB",
- [8] = "486 DX/4",
- [9] = "486 DX/4-WB",
+ [8] = "486 DX/4",
+ [9] = "486 DX/4-WB",
[14] = "Am5x86-WT",
- [15] = "Am5x86-WB"
+ [15] = "Am5x86-WB"
}
},
},
+ .c_early_init = early_init_amd,
.c_init = init_amd,
.c_size_cache = amd_size_cache,
};
@@ -345,3 +348,5 @@
cpu_devs[X86_VENDOR_AMD] = &amd_cpu_dev;
return 0;
}
+
+cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 027e5c0..170d2f5 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -143,14 +143,6 @@
#endif
/*
- * If we configured ourselves for a TSC, we'd better have one!
- */
-#ifdef CONFIG_X86_TSC
- if (!cpu_has_tsc)
- panic("Kernel compiled for Pentium+, requires TSC feature!");
-#endif
-
-/*
* If we were told we had a good local APIC, check for buggy Pentia,
* i.e. all B steppings and the C2 stepping of P54C when using their
* integrated APIC (see 11AP erratum in "Pentium Processor
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index 9681fa1..e0f45ed 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -1,31 +1,34 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/bitops.h>
+
#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/e820.h>
#include <asm/mtrr.h>
+
#include "cpu.h"
#ifdef CONFIG_X86_OOSTORE
static u32 __cpuinit power2(u32 x)
{
- u32 s=1;
- while(s<=x)
- s<<=1;
- return s>>=1;
+ u32 s = 1;
+
+ while (s <= x)
+ s <<= 1;
+
+ return s >>= 1;
}
/*
- * Set up an actual MCR
+ * Set up an actual MCR
*/
-
static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key)
{
u32 lo, hi;
-
+
hi = base & ~0xFFF;
lo = ~(size-1); /* Size is a power of 2 so this makes a mask */
lo &= ~0xFFF; /* Remove the ctrl value bits */
@@ -35,30 +38,28 @@
}
/*
- * Figure what we can cover with MCR's
+ * Figure what we can cover with MCR's
*
- * Shortcut: We know you can't put 4Gig of RAM on a winchip
+ * Shortcut: We know you can't put 4Gig of RAM on a winchip
*/
-
-static u32 __cpuinit ramtop(void) /* 16388 */
+static u32 __cpuinit ramtop(void)
{
- int i;
- u32 top = 0;
u32 clip = 0xFFFFFFFFUL;
-
+ u32 top = 0;
+ int i;
+
for (i = 0; i < e820.nr_map; i++) {
unsigned long start, end;
if (e820.map[i].addr > 0xFFFFFFFFUL)
continue;
/*
- * Don't MCR over reserved space. Ignore the ISA hole
- * we frob around that catastrophe already
+ * Don't MCR over reserved space. Ignore the ISA hole
+ * we frob around that catastrophe already
*/
-
- if (e820.map[i].type == E820_RESERVED)
- {
- if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
+ if (e820.map[i].type == E820_RESERVED) {
+ if (e820.map[i].addr >= 0x100000UL &&
+ e820.map[i].addr < clip)
clip = e820.map[i].addr;
continue;
}
@@ -69,28 +70,27 @@
if (end > top)
top = end;
}
- /* Everything below 'top' should be RAM except for the ISA hole.
- Because of the limited MCR's we want to map NV/ACPI into our
- MCR range for gunk in RAM
-
- Clip might cause us to MCR insufficient RAM but that is an
- acceptable failure mode and should only bite obscure boxes with
- a VESA hole at 15Mb
-
- The second case Clip sometimes kicks in is when the EBDA is marked
- as reserved. Again we fail safe with reasonable results
- */
-
- if(top>clip)
- top=clip;
-
+ /*
+ * Everything below 'top' should be RAM except for the ISA hole.
+ * Because of the limited MCR's we want to map NV/ACPI into our
+ * MCR range for gunk in RAM
+ *
+ * Clip might cause us to MCR insufficient RAM but that is an
+ * acceptable failure mode and should only bite obscure boxes with
+ * a VESA hole at 15Mb
+ *
+ * The second case Clip sometimes kicks in is when the EBDA is marked
+ * as reserved. Again we fail safe with reasonable results
+ */
+ if (top > clip)
+ top = clip;
+
return top;
}
/*
- * Compute a set of MCR's to give maximum coverage
+ * Compute a set of MCR's to give maximum coverage
*/
-
static int __cpuinit centaur_mcr_compute(int nr, int key)
{
u32 mem = ramtop();
@@ -99,141 +99,131 @@
u32 top = root;
u32 floor = 0;
int ct = 0;
-
- while(ct<nr)
- {
+
+ while (ct < nr) {
u32 fspace = 0;
+ u32 high;
+ u32 low;
/*
- * Find the largest block we will fill going upwards
+ * Find the largest block we will fill going upwards
*/
-
- u32 high = power2(mem-top);
+ high = power2(mem-top);
/*
- * Find the largest block we will fill going downwards
+ * Find the largest block we will fill going downwards
*/
-
- u32 low = base/2;
+ low = base/2;
/*
- * Don't fill below 1Mb going downwards as there
- * is an ISA hole in the way.
- */
-
- if(base <= 1024*1024)
+ * Don't fill below 1Mb going downwards as there
+ * is an ISA hole in the way.
+ */
+ if (base <= 1024*1024)
low = 0;
-
+
/*
- * See how much space we could cover by filling below
- * the ISA hole
+ * See how much space we could cover by filling below
+ * the ISA hole
*/
-
- if(floor == 0)
+
+ if (floor == 0)
fspace = 512*1024;
- else if(floor ==512*1024)
+ else if (floor == 512*1024)
fspace = 128*1024;
/* And forget ROM space */
-
+
/*
- * Now install the largest coverage we get
+ * Now install the largest coverage we get
*/
-
- if(fspace > high && fspace > low)
- {
+ if (fspace > high && fspace > low) {
centaur_mcr_insert(ct, floor, fspace, key);
floor += fspace;
- }
- else if(high > low)
- {
+ } else if (high > low) {
centaur_mcr_insert(ct, top, high, key);
top += high;
- }
- else if(low > 0)
- {
+ } else if (low > 0) {
base -= low;
centaur_mcr_insert(ct, base, low, key);
- }
- else break;
+ } else
+ break;
ct++;
}
/*
- * We loaded ct values. We now need to set the mask. The caller
- * must do this bit.
+ * We loaded ct values. We now need to set the mask. The caller
+ * must do this bit.
*/
-
return ct;
}
static void __cpuinit centaur_create_optimal_mcr(void)
{
+ int used;
int i;
- /*
- * Allocate up to 6 mcrs to mark as much of ram as possible
- * as write combining and weak write ordered.
- *
- * To experiment with: Linux never uses stack operations for
- * mmio spaces so we could globally enable stack operation wc
- *
- * Load the registers with type 31 - full write combining, all
- * writes weakly ordered.
- */
- int used = centaur_mcr_compute(6, 31);
/*
- * Wipe unused MCRs
+ * Allocate up to 6 mcrs to mark as much of ram as possible
+ * as write combining and weak write ordered.
+ *
+ * To experiment with: Linux never uses stack operations for
+ * mmio spaces so we could globally enable stack operation wc
+ *
+ * Load the registers with type 31 - full write combining, all
+ * writes weakly ordered.
*/
-
- for(i=used;i<8;i++)
+ used = centaur_mcr_compute(6, 31);
+
+ /*
+ * Wipe unused MCRs
+ */
+ for (i = used; i < 8; i++)
wrmsr(MSR_IDT_MCR0+i, 0, 0);
}
static void __cpuinit winchip2_create_optimal_mcr(void)
{
u32 lo, hi;
+ int used;
int i;
/*
- * Allocate up to 6 mcrs to mark as much of ram as possible
- * as write combining, weak store ordered.
+ * Allocate up to 6 mcrs to mark as much of ram as possible
+ * as write combining, weak store ordered.
*
- * Load the registers with type 25
- * 8 - weak write ordering
- * 16 - weak read ordering
- * 1 - write combining
+ * Load the registers with type 25
+ * 8 - weak write ordering
+ * 16 - weak read ordering
+ * 1 - write combining
+ */
+ used = centaur_mcr_compute(6, 25);
+
+ /*
+ * Mark the registers we are using.
+ */
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ for (i = 0; i < used; i++)
+ lo |= 1<<(9+i);
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+
+ /*
+ * Wipe unused MCRs
*/
- int used = centaur_mcr_compute(6, 25);
-
- /*
- * Mark the registers we are using.
- */
-
- rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
- for(i=0;i<used;i++)
- lo|=1<<(9+i);
- wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-
- /*
- * Wipe unused MCRs
- */
-
- for(i=used;i<8;i++)
+ for (i = used; i < 8; i++)
wrmsr(MSR_IDT_MCR0+i, 0, 0);
}
/*
- * Handle the MCR key on the Winchip 2.
+ * Handle the MCR key on the Winchip 2.
*/
-
static void __cpuinit winchip2_unprotect_mcr(void)
{
u32 lo, hi;
u32 key;
-
+
rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
- lo&=~0x1C0; /* blank bits 8-6 */
+ lo &= ~0x1C0; /* blank bits 8-6 */
key = (lo>>17) & 7;
lo |= key<<6; /* replace with unlock key */
wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
@@ -242,9 +232,9 @@
static void __cpuinit winchip2_protect_mcr(void)
{
u32 lo, hi;
-
+
rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
- lo&=~0x1C0; /* blank bits 8-6 */
+ lo &= ~0x1C0; /* blank bits 8-6 */
wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
}
#endif /* CONFIG_X86_OOSTORE */
@@ -267,17 +257,17 @@
/* enable ACE unit, if present and disabled */
if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) {
- rdmsr (MSR_VIA_FCR, lo, hi);
+ rdmsr(MSR_VIA_FCR, lo, hi);
lo |= ACE_FCR; /* enable ACE unit */
- wrmsr (MSR_VIA_FCR, lo, hi);
+ wrmsr(MSR_VIA_FCR, lo, hi);
printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n");
}
/* enable RNG unit, if present and disabled */
if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) {
- rdmsr (MSR_VIA_RNG, lo, hi);
+ rdmsr(MSR_VIA_RNG, lo, hi);
lo |= RNG_ENABLE; /* enable RNG unit */
- wrmsr (MSR_VIA_RNG, lo, hi);
+ wrmsr(MSR_VIA_RNG, lo, hi);
printk(KERN_INFO "CPU: Enabled h/w RNG\n");
}
@@ -288,171 +278,183 @@
}
/* Cyrix III family needs CX8 & PGE explicitly enabled. */
- if (c->x86_model >=6 && c->x86_model <= 9) {
- rdmsr (MSR_VIA_FCR, lo, hi);
+ if (c->x86_model >= 6 && c->x86_model <= 9) {
+ rdmsr(MSR_VIA_FCR, lo, hi);
lo |= (1<<1 | 1<<7);
- wrmsr (MSR_VIA_FCR, lo, hi);
- set_bit(X86_FEATURE_CX8, c->x86_capability);
+ wrmsr(MSR_VIA_FCR, lo, hi);
+ set_cpu_cap(c, X86_FEATURE_CX8);
}
/* Before Nehemiah, the C3's had 3dNOW! */
- if (c->x86_model >=6 && c->x86_model <9)
- set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+ if (c->x86_model >= 6 && c->x86_model < 9)
+ set_cpu_cap(c, X86_FEATURE_3DNOW);
get_model_name(c);
display_cacheinfo(c);
}
+enum {
+ ECX8 = 1<<1,
+ EIERRINT = 1<<2,
+ DPM = 1<<3,
+ DMCE = 1<<4,
+ DSTPCLK = 1<<5,
+ ELINEAR = 1<<6,
+ DSMC = 1<<7,
+ DTLOCK = 1<<8,
+ EDCTLB = 1<<8,
+ EMMX = 1<<9,
+ DPDC = 1<<11,
+ EBRPRED = 1<<12,
+ DIC = 1<<13,
+ DDC = 1<<14,
+ DNA = 1<<15,
+ ERETSTK = 1<<16,
+ E2MMX = 1<<19,
+ EAMD3D = 1<<20,
+};
+
static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
{
- enum {
- ECX8=1<<1,
- EIERRINT=1<<2,
- DPM=1<<3,
- DMCE=1<<4,
- DSTPCLK=1<<5,
- ELINEAR=1<<6,
- DSMC=1<<7,
- DTLOCK=1<<8,
- EDCTLB=1<<8,
- EMMX=1<<9,
- DPDC=1<<11,
- EBRPRED=1<<12,
- DIC=1<<13,
- DDC=1<<14,
- DNA=1<<15,
- ERETSTK=1<<16,
- E2MMX=1<<19,
- EAMD3D=1<<20,
- };
char *name;
- u32 fcr_set=0;
- u32 fcr_clr=0;
- u32 lo,hi,newlo;
- u32 aa,bb,cc,dd;
+ u32 fcr_set = 0;
+ u32 fcr_clr = 0;
+ u32 lo, hi, newlo;
+ u32 aa, bb, cc, dd;
- /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
- 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
- clear_bit(0*32+31, c->x86_capability);
+ /*
+ * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
+ */
+ clear_cpu_cap(c, 0*32+31);
switch (c->x86) {
-
- case 5:
- switch(c->x86_model) {
- case 4:
- name="C6";
- fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
- fcr_clr=DPDC;
- printk(KERN_NOTICE "Disabling bugged TSC.\n");
- clear_bit(X86_FEATURE_TSC, c->x86_capability);
+ case 5:
+ switch (c->x86_model) {
+ case 4:
+ name = "C6";
+ fcr_set = ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
+ fcr_clr = DPDC;
+ printk(KERN_NOTICE "Disabling bugged TSC.\n");
+ clear_cpu_cap(c, X86_FEATURE_TSC);
#ifdef CONFIG_X86_OOSTORE
- centaur_create_optimal_mcr();
- /* Enable
- write combining on non-stack, non-string
- write combining on string, all types
- weak write ordering
-
- The C6 original lacks weak read order
-
- Note 0x120 is write only on Winchip 1 */
-
- wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
-#endif
- break;
- case 8:
- switch(c->x86_mask) {
- default:
- name="2";
- break;
- case 7 ... 9:
- name="2A";
- break;
- case 10 ... 15:
- name="2B";
- break;
- }
- fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
- fcr_clr=DPDC;
-#ifdef CONFIG_X86_OOSTORE
- winchip2_unprotect_mcr();
- winchip2_create_optimal_mcr();
- rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
- /* Enable
- write combining on non-stack, non-string
- write combining on string, all types
- weak write ordering
- */
- lo|=31;
- wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
- winchip2_protect_mcr();
+ centaur_create_optimal_mcr();
+ /*
+ * Enable:
+ * write combining on non-stack, non-string
+ * write combining on string, all types
+ * weak write ordering
+ *
+ * The C6 original lacks weak read order
+ *
+ * Note 0x120 is write only on Winchip 1
+ */
+ wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
#endif
- break;
- case 9:
- name="3";
- fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
- fcr_clr=DPDC;
-#ifdef CONFIG_X86_OOSTORE
- winchip2_unprotect_mcr();
- winchip2_create_optimal_mcr();
- rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
- /* Enable
- write combining on non-stack, non-string
- write combining on string, all types
- weak write ordering
- */
- lo|=31;
- wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
- winchip2_protect_mcr();
-#endif
- break;
+ break;
+ case 8:
+ switch (c->x86_mask) {
default:
- name="??";
+ name = "2";
+ break;
+ case 7 ... 9:
+ name = "2A";
+ break;
+ case 10 ... 15:
+ name = "2B";
+ break;
}
-
- rdmsr(MSR_IDT_FCR1, lo, hi);
- newlo=(lo|fcr_set) & (~fcr_clr);
-
- if (newlo!=lo) {
- printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
- wrmsr(MSR_IDT_FCR1, newlo, hi );
- } else {
- printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
- }
- /* Emulate MTRRs using Centaur's MCR. */
- set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
- /* Report CX8 */
- set_bit(X86_FEATURE_CX8, c->x86_capability);
- /* Set 3DNow! on Winchip 2 and above. */
- if (c->x86_model >=8)
- set_bit(X86_FEATURE_3DNOW, c->x86_capability);
- /* See if we can find out some more. */
- if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
- /* Yes, we can. */
- cpuid(0x80000005,&aa,&bb,&cc,&dd);
- /* Add L1 data and code cache sizes. */
- c->x86_cache_size = (cc>>24)+(dd>>24);
- }
- sprintf( c->x86_model_id, "WinChip %s", name );
+ fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|
+ E2MMX|EAMD3D;
+ fcr_clr = DPDC;
+#ifdef CONFIG_X86_OOSTORE
+ winchip2_unprotect_mcr();
+ winchip2_create_optimal_mcr();
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ /*
+ * Enable:
+ * write combining on non-stack, non-string
+ * write combining on string, all types
+ * weak write ordering
+ */
+ lo |= 31;
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ winchip2_protect_mcr();
+#endif
break;
-
- case 6:
- init_c3(c);
+ case 9:
+ name = "3";
+ fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|
+ E2MMX|EAMD3D;
+ fcr_clr = DPDC;
+#ifdef CONFIG_X86_OOSTORE
+ winchip2_unprotect_mcr();
+ winchip2_create_optimal_mcr();
+ rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ /*
+ * Enable:
+ * write combining on non-stack, non-string
+ * write combining on string, all types
+ * weak write ordering
+ */
+ lo |= 31;
+ wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+ winchip2_protect_mcr();
+#endif
break;
+ default:
+ name = "??";
+ }
+
+ rdmsr(MSR_IDT_FCR1, lo, hi);
+ newlo = (lo|fcr_set) & (~fcr_clr);
+
+ if (newlo != lo) {
+ printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n",
+ lo, newlo);
+ wrmsr(MSR_IDT_FCR1, newlo, hi);
+ } else {
+ printk(KERN_INFO "Centaur FCR is 0x%X\n", lo);
+ }
+ /* Emulate MTRRs using Centaur's MCR. */
+ set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+ /* Report CX8 */
+ set_cpu_cap(c, X86_FEATURE_CX8);
+ /* Set 3DNow! on Winchip 2 and above. */
+ if (c->x86_model >= 8)
+ set_cpu_cap(c, X86_FEATURE_3DNOW);
+ /* See if we can find out some more. */
+ if (cpuid_eax(0x80000000) >= 0x80000005) {
+ /* Yes, we can. */
+ cpuid(0x80000005, &aa, &bb, &cc, &dd);
+ /* Add L1 data and code cache sizes. */
+ c->x86_cache_size = (cc>>24)+(dd>>24);
+ }
+ sprintf(c->x86_model_id, "WinChip %s", name);
+ break;
+
+ case 6:
+ init_c3(c);
+ break;
}
}
-static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit
+centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
{
/* VIA C3 CPUs (670-68F) need further shifting. */
if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
size >>= 8;
- /* VIA also screwed up Nehemiah stepping 1, and made
- it return '65KB' instead of '64KB'
- - Note, it seems this may only be in engineering samples. */
- if ((c->x86==6) && (c->x86_model==9) && (c->x86_mask==1) && (size==65))
- size -=1;
+ /*
+ * There's also an erratum in Nehemiah stepping 1, which
+ * returns '65KB' instead of '64KB'
+ * - Note, it seems this may only be in engineering samples.
+ */
+ if ((c->x86 == 6) && (c->x86_model == 9) &&
+ (c->x86_mask == 1) && (size == 65))
+ size -= 1;
return size;
}
@@ -464,8 +466,4 @@
.c_size_cache = centaur_size_cache,
};
-int __init centaur_init_cpu(void)
-{
- cpu_devs[X86_VENDOR_CENTAUR] = ¢aur_cpu_dev;
- return 0;
-}
+cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index a38aafa..d999d78 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -62,9 +62,9 @@
static int cachesize_override __cpuinitdata = -1;
static int disable_x86_serial_nr __cpuinitdata = 1;
-struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
+struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
-static void __cpuinit default_init(struct cpuinfo_x86 * c)
+static void __cpuinit default_init(struct cpuinfo_x86 *c)
{
/* Not much we can do here... */
/* Check if at least it has cpuid */
@@ -81,11 +81,11 @@
.c_init = default_init,
.c_vendor = "Unknown",
};
-static struct cpu_dev * this_cpu __cpuinitdata = &default_cpu;
+static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
static int __init cachesize_setup(char *str)
{
- get_option (&str, &cachesize_override);
+ get_option(&str, &cachesize_override);
return 1;
}
__setup("cachesize=", cachesize_setup);
@@ -107,12 +107,12 @@
/* Intel chips right-justify this string for some dumb reason;
undo that brain damage */
p = q = &c->x86_model_id[0];
- while ( *p == ' ' )
+ while (*p == ' ')
p++;
- if ( p != q ) {
- while ( *p )
+ if (p != q) {
+ while (*p)
*q++ = *p++;
- while ( q <= &c->x86_model_id[48] )
+ while (q <= &c->x86_model_id[48])
*q++ = '\0'; /* Zero-pad the rest */
}
@@ -130,7 +130,7 @@
cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
- c->x86_cache_size=(ecx>>24)+(edx>>24);
+ c->x86_cache_size = (ecx>>24)+(edx>>24);
}
if (n < 0x80000006) /* Some chips just has a large L1. */
@@ -138,16 +138,16 @@
ecx = cpuid_ecx(0x80000006);
l2size = ecx >> 16;
-
+
/* do processor-specific cache resizing */
if (this_cpu->c_size_cache)
- l2size = this_cpu->c_size_cache(c,l2size);
+ l2size = this_cpu->c_size_cache(c, l2size);
/* Allow user to override all this if necessary. */
if (cachesize_override != -1)
l2size = cachesize_override;
- if ( l2size == 0 )
+ if (l2size == 0)
return; /* Again, no L2 cache is possible */
c->x86_cache_size = l2size;
@@ -156,16 +156,19 @@
l2size, ecx & 0xFF);
}
-/* Naming convention should be: <Name> [(<Codename>)] */
-/* This table only is used unless init_<vendor>() below doesn't set it; */
-/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
+/*
+ * Naming convention should be: <Name> [(<Codename>)]
+ * This table only is used unless init_<vendor>() below doesn't set it;
+ * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
+ *
+ */
/* Look up CPU names by table lookup. */
static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
{
struct cpu_model_info *info;
- if ( c->x86_model >= 16 )
+ if (c->x86_model >= 16)
return NULL; /* Range check */
if (!this_cpu)
@@ -190,9 +193,9 @@
for (i = 0; i < X86_VENDOR_NUM; i++) {
if (cpu_devs[i]) {
- if (!strcmp(v,cpu_devs[i]->c_ident[0]) ||
- (cpu_devs[i]->c_ident[1] &&
- !strcmp(v,cpu_devs[i]->c_ident[1]))) {
+ if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
+ (cpu_devs[i]->c_ident[1] &&
+ !strcmp(v, cpu_devs[i]->c_ident[1]))) {
c->x86_vendor = i;
if (!early)
this_cpu = cpu_devs[i];
@@ -210,7 +213,7 @@
}
-static int __init x86_fxsr_setup(char * s)
+static int __init x86_fxsr_setup(char *s)
{
setup_clear_cpu_cap(X86_FEATURE_FXSR);
setup_clear_cpu_cap(X86_FEATURE_XMM);
@@ -219,7 +222,7 @@
__setup("nofxsr", x86_fxsr_setup);
-static int __init x86_sep_setup(char * s)
+static int __init x86_sep_setup(char *s)
{
setup_clear_cpu_cap(X86_FEATURE_SEP);
return 1;
@@ -306,14 +309,30 @@
}
+ clear_cpu_cap(c, X86_FEATURE_PAT);
+
+ switch (c->x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (c->x86 >= 0xf && c->x86 <= 0x11)
+ set_cpu_cap(c, X86_FEATURE_PAT);
+ break;
+ case X86_VENDOR_INTEL:
+ if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+ set_cpu_cap(c, X86_FEATURE_PAT);
+ break;
+ }
+
}
-/* Do minimum CPU detection early.
- Fields really needed: vendor, cpuid_level, family, model, mask, cache alignment.
- The others are not touched to avoid unwanted side effects.
-
- WARNING: this function is only called on the BP. Don't add code here
- that is supposed to run on all CPUs. */
+/*
+ * Do minimum CPU detection early.
+ * Fields really needed: vendor, cpuid_level, family, model, mask,
+ * cache alignment.
+ * The others are not touched to avoid unwanted side effects.
+ *
+ * WARNING: this function is only called on the BP. Don't add code here
+ * that is supposed to run on all CPUs.
+ */
static void __init early_cpu_detect(void)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
@@ -328,19 +347,14 @@
get_cpu_vendor(c, 1);
- switch (c->x86_vendor) {
- case X86_VENDOR_AMD:
- early_init_amd(c);
- break;
- case X86_VENDOR_INTEL:
- early_init_intel(c);
- break;
- }
+ if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
+ cpu_devs[c->x86_vendor]->c_early_init)
+ cpu_devs[c->x86_vendor]->c_early_init(c);
early_get_cap(c);
}
-static void __cpuinit generic_identify(struct cpuinfo_x86 * c)
+static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
{
u32 tfms, xlvl;
unsigned int ebx;
@@ -351,13 +365,12 @@
(unsigned int *)&c->x86_vendor_id[0],
(unsigned int *)&c->x86_vendor_id[8],
(unsigned int *)&c->x86_vendor_id[4]);
-
+
get_cpu_vendor(c, 0);
/* Initialize the standard set of capabilities */
/* Note that the vendor-specific code below might override */
-
/* Intel-defined flags: level 0x00000001 */
- if ( c->cpuid_level >= 0x00000001 ) {
+ if (c->cpuid_level >= 0x00000001) {
u32 capability, excap;
cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
c->x86_capability[0] = capability;
@@ -369,12 +382,14 @@
if (c->x86 >= 0x6)
c->x86_model += ((tfms >> 16) & 0xF) << 4;
c->x86_mask = tfms & 15;
+ c->initial_apicid = (ebx >> 24) & 0xFF;
#ifdef CONFIG_X86_HT
- c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0);
+ c->apicid = phys_pkg_id(c->initial_apicid, 0);
+ c->phys_proc_id = c->initial_apicid;
#else
- c->apicid = (ebx >> 24) & 0xFF;
+ c->apicid = c->initial_apicid;
#endif
- if (c->x86_capability[0] & (1<<19))
+ if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8;
} else {
/* Have CPUID level 0 only - unheard of */
@@ -383,33 +398,42 @@
/* AMD-defined flags: level 0x80000001 */
xlvl = cpuid_eax(0x80000000);
- if ( (xlvl & 0xffff0000) == 0x80000000 ) {
- if ( xlvl >= 0x80000001 ) {
+ if ((xlvl & 0xffff0000) == 0x80000000) {
+ if (xlvl >= 0x80000001) {
c->x86_capability[1] = cpuid_edx(0x80000001);
c->x86_capability[6] = cpuid_ecx(0x80000001);
}
- if ( xlvl >= 0x80000004 )
+ if (xlvl >= 0x80000004)
get_model_name(c); /* Default name */
}
init_scattered_cpuid_features(c);
}
-#ifdef CONFIG_X86_HT
- c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
-#endif
+ clear_cpu_cap(c, X86_FEATURE_PAT);
+
+ switch (c->x86_vendor) {
+ case X86_VENDOR_AMD:
+ if (c->x86 >= 0xf && c->x86 <= 0x11)
+ set_cpu_cap(c, X86_FEATURE_PAT);
+ break;
+ case X86_VENDOR_INTEL:
+ if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+ set_cpu_cap(c, X86_FEATURE_PAT);
+ break;
+ }
}
static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
{
- if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
+ if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) {
/* Disable processor serial number */
- unsigned long lo,hi;
- rdmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+ unsigned long lo, hi;
+ rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
lo |= 0x200000;
- wrmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+ wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
printk(KERN_NOTICE "CPU serial number disabled.\n");
- clear_bit(X86_FEATURE_PN, c->x86_capability);
+ clear_cpu_cap(c, X86_FEATURE_PN);
/* Disabling the serial number may affect the cpuid level */
c->cpuid_level = cpuid_eax(0);
@@ -444,9 +468,11 @@
memset(&c->x86_capability, 0, sizeof c->x86_capability);
if (!have_cpuid_p()) {
- /* First of all, decide if this is a 486 or higher */
- /* It's a 486 if we can modify the AC flag */
- if ( flag_is_changeable_p(X86_EFLAGS_AC) )
+ /*
+ * First of all, decide if this is a 486 or higher
+ * It's a 486 if we can modify the AC flag
+ */
+ if (flag_is_changeable_p(X86_EFLAGS_AC))
c->x86 = 4;
else
c->x86 = 3;
@@ -479,10 +505,10 @@
*/
/* If the model name is still unset, do table lookup. */
- if ( !c->x86_model_id[0] ) {
+ if (!c->x86_model_id[0]) {
char *p;
p = table_lookup_model(c);
- if ( p )
+ if (p)
strcpy(c->x86_model_id, p);
else
/* Last resort... */
@@ -496,9 +522,9 @@
* common between the CPUs. The first time this routine gets
* executed, c == &boot_cpu_data.
*/
- if ( c != &boot_cpu_data ) {
+ if (c != &boot_cpu_data) {
/* AND the already accumulated flags with these */
- for ( i = 0 ; i < NCAPINTS ; i++ )
+ for (i = 0 ; i < NCAPINTS ; i++)
boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
}
@@ -542,7 +568,7 @@
if (smp_num_siblings == 1) {
printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
- } else if (smp_num_siblings > 1 ) {
+ } else if (smp_num_siblings > 1) {
if (smp_num_siblings > NR_CPUS) {
printk(KERN_WARNING "CPU: Unsupported number of the "
@@ -552,7 +578,7 @@
}
index_msb = get_count_order(smp_num_siblings);
- c->phys_proc_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb);
+ c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
c->phys_proc_id);
@@ -563,7 +589,7 @@
core_bits = get_count_order(c->x86_max_cores);
- c->cpu_core_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) &
+ c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
((1 << core_bits) - 1);
if (c->x86_max_cores > 1)
@@ -597,7 +623,7 @@
else
printk("%s", c->x86_model_id);
- if (c->x86_mask || c->cpuid_level >= 0)
+ if (c->x86_mask || c->cpuid_level >= 0)
printk(" stepping %02x\n", c->x86_mask);
else
printk("\n");
@@ -616,23 +642,15 @@
cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
-/* This is hacky. :)
- * We're emulating future behavior.
- * In the future, the cpu-specific init functions will be called implicitly
- * via the magic of initcalls.
- * They will insert themselves into the cpu_devs structure.
- * Then, when cpu_init() is called, we can just iterate over that array.
- */
void __init early_cpu_init(void)
{
- intel_cpu_init();
- cyrix_init_cpu();
- nsc_init_cpu();
- amd_init_cpu();
- centaur_init_cpu();
- transmeta_init_cpu();
- nexgen_init_cpu();
- umc_init_cpu();
+ struct cpu_vendor_dev *cvdev;
+
+ for (cvdev = __x86cpuvendor_start ;
+ cvdev < __x86cpuvendor_end ;
+ cvdev++)
+ cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
+
early_cpu_detect();
}
@@ -666,7 +684,7 @@
{
int cpu = smp_processor_id();
struct task_struct *curr = current;
- struct tss_struct * t = &per_cpu(init_tss, cpu);
+ struct tss_struct *t = &per_cpu(init_tss, cpu);
struct thread_struct *thread = &curr->thread;
if (cpu_test_and_set(cpu, cpu_initialized)) {
@@ -692,7 +710,7 @@
enter_lazy_tlb(&init_mm, curr);
load_sp0(t, thread);
- set_tss_desc(cpu,t);
+ set_tss_desc(cpu, t);
load_TR_desc();
load_LDT(&init_mm.context);
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index e0b38c3..783691b 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -14,6 +14,7 @@
struct cpu_model_info c_models[4];
+ void (*c_early_init)(struct cpuinfo_x86 *c);
void (*c_init)(struct cpuinfo_x86 * c);
void (*c_identify)(struct cpuinfo_x86 * c);
unsigned int (*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
@@ -21,18 +22,17 @@
extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
+struct cpu_vendor_dev {
+ int vendor;
+ struct cpu_dev *cpu_dev;
+};
+
+#define cpu_vendor_dev_register(cpu_vendor_id, cpu_dev) \
+ static struct cpu_vendor_dev __cpu_vendor_dev_##cpu_vendor_id __used \
+ __attribute__((__section__(".x86cpuvendor.init"))) = \
+ { cpu_vendor_id, cpu_dev }
+
+extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[];
+
extern int get_model_name(struct cpuinfo_x86 *c);
extern void display_cacheinfo(struct cpuinfo_x86 *c);
-
-extern void early_init_intel(struct cpuinfo_x86 *c);
-extern void early_init_amd(struct cpuinfo_x86 *c);
-
-/* Specific CPU type init functions */
-int intel_cpu_init(void);
-int amd_init_cpu(void);
-int cyrix_init_cpu(void);
-int nsc_init_cpu(void);
-int centaur_init_cpu(void);
-int transmeta_init_cpu(void);
-int nexgen_init_cpu(void);
-int umc_init_cpu(void);
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 7139b02..3fd7a67 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -19,7 +19,7 @@
{
unsigned char ccr2, ccr3;
unsigned long flags;
-
+
/* we test for DEVID by checking whether CCR3 is writable */
local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
@@ -37,8 +37,7 @@
setCx86(CX86_CCR2, ccr2);
*dir0 = 0xfe;
}
- }
- else {
+ } else {
setCx86(CX86_CCR3, ccr3); /* restore CCR3 */
/* read DIR0 and DIR1 CPU registers */
@@ -86,7 +85,7 @@
static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c)
{
unsigned long flags;
-
+
if (Cx86_dir0_msb == 3) {
unsigned char ccr3, ccr5;
@@ -132,7 +131,7 @@
/* set 'Not Write-through' */
write_cr0(read_cr0() | X86_CR0_NW);
/* CCR2 bit 2: lock NW bit and set WT1 */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
+ setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
}
static void __cpuinit set_cx86_inc(void)
@@ -148,7 +147,7 @@
setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
/* PCR0 -- Performance Control */
/* Incrementor Margin 10 */
- setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
+ setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
}
@@ -167,16 +166,16 @@
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
-
+
/* FPU fast, DTE cache, Mem bypass */
setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
-
+
set_cx86_memwb();
- set_cx86_reorder();
+ set_cx86_reorder();
set_cx86_inc();
-
+
local_irq_restore(flags);
}
@@ -187,14 +186,16 @@
char *buf = c->x86_model_id;
const char *p = NULL;
- /* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
- 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
- clear_bit(0*32+31, c->x86_capability);
+ /*
+ * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+ * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
+ */
+ clear_cpu_cap(c, 0*32+31);
/* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
- if ( test_bit(1*32+24, c->x86_capability) ) {
- clear_bit(1*32+24, c->x86_capability);
- set_bit(X86_FEATURE_CXMMX, c->x86_capability);
+ if (test_cpu_cap(c, 1*32+24)) {
+ clear_cpu_cap(c, 1*32+24);
+ set_cpu_cap(c, X86_FEATURE_CXMMX);
}
do_cyrix_devid(&dir0, &dir1);
@@ -213,7 +214,7 @@
* the model, multiplier and stepping. Black magic included,
* to make the silicon step/rev numbers match the printed ones.
*/
-
+
switch (dir0_msn) {
unsigned char tmp;
@@ -241,7 +242,7 @@
} else /* 686 */
p = Cx86_cb+1;
/* Emulate MTRRs using Cyrix's ARRs. */
- set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
/* 6x86's contain this bug */
c->coma_bug = 1;
break;
@@ -250,17 +251,18 @@
#ifdef CONFIG_PCI
{
u32 vendor, device;
- /* It isn't really a PCI quirk directly, but the cure is the
- same. The MediaGX has deep magic SMM stuff that handles the
- SB emulation. It throws away the fifo on disable_dma() which
- is wrong and ruins the audio.
-
- Bug2: VSA1 has a wrap bug so that using maximum sized DMA
- causes bad things. According to NatSemi VSA2 has another
- bug to do with 'hlt'. I've not seen any boards using VSA2
- and X doesn't seem to support it either so who cares 8).
- VSA1 we work around however.
- */
+ /*
+ * It isn't really a PCI quirk directly, but the cure is the
+ * same. The MediaGX has deep magic SMM stuff that handles the
+ * SB emulation. It throws away the fifo on disable_dma() which
+ * is wrong and ruins the audio.
+ *
+ * Bug2: VSA1 has a wrap bug so that using maximum sized DMA
+ * causes bad things. According to NatSemi VSA2 has another
+ * bug to do with 'hlt'. I've not seen any boards using VSA2
+ * and X doesn't seem to support it either so who cares 8).
+ * VSA1 we work around however.
+ */
printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
isa_dma_bridge_buggy = 2;
@@ -273,55 +275,51 @@
/*
* The 5510/5520 companion chips have a funky PIT.
- */
+ */
if (vendor == PCI_VENDOR_ID_CYRIX &&
(device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520))
mark_tsc_unstable("cyrix 5510/5520 detected");
}
#endif
- c->x86_cache_size=16; /* Yep 16K integrated cache thats it */
+ c->x86_cache_size = 16; /* Yep 16K integrated cache thats it */
/* GXm supports extended cpuid levels 'ala' AMD */
if (c->cpuid_level == 2) {
/* Enable cxMMX extensions (GX1 Datasheet 54) */
setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
-
+
/*
* GXm : 0x30 ... 0x5f GXm datasheet 51
* GXlv: 0x6x GXlv datasheet 54
* ? : 0x7x
* GX1 : 0x8x GX1 datasheet 56
*/
- if((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <=dir1 && dir1 <= 0x8f))
+ if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
geode_configure();
get_model_name(c); /* get CPU marketing name */
return;
- }
- else { /* MediaGX */
+ } else { /* MediaGX */
Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
p = Cx86_cb+2;
c->x86_model = (dir1 & 0x20) ? 1 : 2;
}
break;
- case 5: /* 6x86MX/M II */
- if (dir1 > 7)
- {
+ case 5: /* 6x86MX/M II */
+ if (dir1 > 7) {
dir0_msn++; /* M II */
/* Enable MMX extensions (App note 108) */
setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
- }
- else
- {
+ } else {
c->coma_bug = 1; /* 6x86MX, it has the bug. */
}
tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
p = Cx86_cb+tmp;
- if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
+ if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
(c->x86_model)++;
/* Emulate MTRRs using Cyrix's ARRs. */
- set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
break;
case 0xf: /* Cyrix 486 without DEVID registers */
@@ -343,7 +341,8 @@
break;
}
strcpy(buf, Cx86_model[dir0_msn & 7]);
- if (p) strcat(buf, p);
+ if (p)
+ strcat(buf, p);
return;
}
@@ -352,7 +351,8 @@
*/
static void __cpuinit init_nsc(struct cpuinfo_x86 *c)
{
- /* There may be GX1 processors in the wild that are branded
+ /*
+ * There may be GX1 processors in the wild that are branded
* NSC and not Cyrix.
*
* This function only handles the GX processor, and kicks every
@@ -377,7 +377,7 @@
* by the fact that they preserve the flags across the division of 5/2.
* PII and PPro exhibit this behavior too, but they have cpuid available.
*/
-
+
/*
* Perform the Cyrix 5/2 test. A Cyrix won't change
* the flags, while other 486 chips will.
@@ -398,27 +398,26 @@
return (unsigned char) (test >> 8) == 0x02;
}
-static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c)
+static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
{
/* Detect Cyrix with disabled CPUID */
- if ( c->x86 == 4 && test_cyrix_52div() ) {
+ if (c->x86 == 4 && test_cyrix_52div()) {
unsigned char dir0, dir1;
-
+
strcpy(c->x86_vendor_id, "CyrixInstead");
- c->x86_vendor = X86_VENDOR_CYRIX;
-
- /* Actually enable cpuid on the older cyrix */
-
- /* Retrieve CPU revisions */
-
+ c->x86_vendor = X86_VENDOR_CYRIX;
+
+ /* Actually enable cpuid on the older cyrix */
+
+ /* Retrieve CPU revisions */
+
do_cyrix_devid(&dir0, &dir1);
- dir0>>=4;
-
+ dir0 >>= 4;
+
/* Check it is an affected model */
-
- if (dir0 == 5 || dir0 == 3)
- {
+
+ if (dir0 == 5 || dir0 == 3) {
unsigned char ccr3;
unsigned long flags;
printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
@@ -434,26 +433,17 @@
static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
.c_vendor = "Cyrix",
- .c_ident = { "CyrixInstead" },
+ .c_ident = { "CyrixInstead" },
.c_init = init_cyrix,
.c_identify = cyrix_identify,
};
-int __init cyrix_init_cpu(void)
-{
- cpu_devs[X86_VENDOR_CYRIX] = &cyrix_cpu_dev;
- return 0;
-}
+cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev);
static struct cpu_dev nsc_cpu_dev __cpuinitdata = {
.c_vendor = "NSC",
- .c_ident = { "Geode by NSC" },
+ .c_ident = { "Geode by NSC" },
.c_init = init_nsc,
};
-int __init nsc_init_cpu(void)
-{
- cpu_devs[X86_VENDOR_NSC] = &nsc_cpu_dev;
- return 0;
-}
-
+cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev);
diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c
index ee975ac..e43ad4a 100644
--- a/arch/x86/kernel/cpu/feature_names.c
+++ b/arch/x86/kernel/cpu/feature_names.c
@@ -4,7 +4,7 @@
* This file must not contain any executable code.
*/
-#include "asm/cpufeature.h"
+#include <asm/cpufeature.h>
/*
* These flag bits must match the definitions in <asm/cpufeature.h>.
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index fae31ce..fe9224c 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -30,7 +30,7 @@
struct movsl_mask movsl_mask __read_mostly;
#endif
-void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
+static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
{
/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
if (c->x86 == 15 && c->x86_cache_alignment == 64)
@@ -45,7 +45,7 @@
*
* This is called before we do cpu ident work
*/
-
+
int __cpuinit ppro_with_ram_bug(void)
{
/* Uses data from early_cpu_detect now */
@@ -58,7 +58,7 @@
}
return 0;
}
-
+
/*
* P4 Xeon errata 037 workaround.
@@ -69,7 +69,7 @@
unsigned long lo, hi;
if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
- rdmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+ rdmsr(MSR_IA32_MISC_ENABLE, lo, hi);
if ((lo & (1<<9)) == 0) {
printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
@@ -127,10 +127,10 @@
*/
c->f00f_bug = 0;
if (!paravirt_enabled() && c->x86 == 5) {
- static int f00f_workaround_enabled = 0;
+ static int f00f_workaround_enabled;
c->f00f_bug = 1;
- if ( !f00f_workaround_enabled ) {
+ if (!f00f_workaround_enabled) {
trap_init_f00f_bug();
printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
f00f_workaround_enabled = 1;
@@ -139,20 +139,22 @@
#endif
l2 = init_intel_cacheinfo(c);
- if (c->cpuid_level > 9 ) {
+ if (c->cpuid_level > 9) {
unsigned eax = cpuid_eax(10);
/* Check for version and the number of counters */
if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
- set_bit(X86_FEATURE_ARCH_PERFMON, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
}
/* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */
if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
- clear_bit(X86_FEATURE_SEP, c->x86_capability);
+ clear_cpu_cap(c, X86_FEATURE_SEP);
- /* Names for the Pentium II/Celeron processors
- detectable only by also checking the cache size.
- Dixon is NOT a Celeron. */
+ /*
+ * Names for the Pentium II/Celeron processors
+ * detectable only by also checking the cache size.
+ * Dixon is NOT a Celeron.
+ */
if (c->x86 == 6) {
switch (c->x86_model) {
case 5:
@@ -163,14 +165,14 @@
p = "Mobile Pentium II (Dixon)";
}
break;
-
+
case 6:
if (l2 == 128)
p = "Celeron (Mendocino)";
else if (c->x86_mask == 0 || c->x86_mask == 5)
p = "Celeron-A";
break;
-
+
case 8:
if (l2 == 128)
p = "Celeron (Coppermine)";
@@ -178,9 +180,9 @@
}
}
- if ( p )
+ if (p)
strcpy(c->x86_model_id, p);
-
+
c->x86_max_cores = num_cpu_cores(c);
detect_ht(c);
@@ -207,28 +209,29 @@
#endif
if (cpu_has_xmm2)
- set_bit(X86_FEATURE_LFENCE_RDTSC, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
if (c->x86 == 15) {
- set_bit(X86_FEATURE_P4, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_P4);
}
- if (c->x86 == 6)
- set_bit(X86_FEATURE_P3, c->x86_capability);
+ if (c->x86 == 6)
+ set_cpu_cap(c, X86_FEATURE_P3);
if (cpu_has_ds) {
unsigned int l1;
rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
if (!(l1 & (1<<11)))
- set_bit(X86_FEATURE_BTS, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_BTS);
if (!(l1 & (1<<12)))
- set_bit(X86_FEATURE_PEBS, c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_PEBS);
}
if (cpu_has_bts)
ds_init_intel(c);
}
-static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
{
- /* Intel PIII Tualatin. This comes in two flavours.
+ /*
+ * Intel PIII Tualatin. This comes in two flavours.
* One has 256kb of cache, the other 512. We have no way
* to determine which, so we use a boottime override
* for the 512kb model, and assume 256 otherwise.
@@ -240,42 +243,42 @@
static struct cpu_dev intel_cpu_dev __cpuinitdata = {
.c_vendor = "Intel",
- .c_ident = { "GenuineIntel" },
+ .c_ident = { "GenuineIntel" },
.c_models = {
- { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
- {
- [0] = "486 DX-25/33",
- [1] = "486 DX-50",
- [2] = "486 SX",
- [3] = "486 DX/2",
- [4] = "486 SL",
- [5] = "486 SX/2",
- [7] = "486 DX/2-WB",
- [8] = "486 DX/4",
+ { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
+ {
+ [0] = "486 DX-25/33",
+ [1] = "486 DX-50",
+ [2] = "486 SX",
+ [3] = "486 DX/2",
+ [4] = "486 SL",
+ [5] = "486 SX/2",
+ [7] = "486 DX/2-WB",
+ [8] = "486 DX/4",
[9] = "486 DX/4-WB"
}
},
{ .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
- {
- [0] = "Pentium 60/66 A-step",
- [1] = "Pentium 60/66",
+ {
+ [0] = "Pentium 60/66 A-step",
+ [1] = "Pentium 60/66",
[2] = "Pentium 75 - 200",
- [3] = "OverDrive PODP5V83",
+ [3] = "OverDrive PODP5V83",
[4] = "Pentium MMX",
- [7] = "Mobile Pentium 75 - 200",
+ [7] = "Mobile Pentium 75 - 200",
[8] = "Mobile Pentium MMX"
}
},
{ .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
- {
+ {
[0] = "Pentium Pro A-step",
- [1] = "Pentium Pro",
- [3] = "Pentium II (Klamath)",
- [4] = "Pentium II (Deschutes)",
- [5] = "Pentium II (Deschutes)",
+ [1] = "Pentium Pro",
+ [3] = "Pentium II (Klamath)",
+ [4] = "Pentium II (Deschutes)",
+ [5] = "Pentium II (Deschutes)",
[6] = "Mobile Pentium II",
- [7] = "Pentium III (Katmai)",
- [8] = "Pentium III (Coppermine)",
+ [7] = "Pentium III (Katmai)",
+ [8] = "Pentium III (Coppermine)",
[10] = "Pentium III (Cascades)",
[11] = "Pentium III (Tualatin)",
}
@@ -290,15 +293,12 @@
}
},
},
+ .c_early_init = early_init_intel,
.c_init = init_intel,
.c_size_cache = intel_size_cache,
};
-__init int intel_cpu_init(void)
-{
- cpu_devs[X86_VENDOR_INTEL] = &intel_cpu_dev;
- return 0;
-}
+cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
#ifndef CONFIG_X86_CMPXCHG
unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
@@ -364,5 +364,5 @@
EXPORT_SYMBOL(cmpxchg_486_u64);
#endif
-// arch_initcall(intel_cpu_init);
+/* arch_initcall(intel_cpu_init); */
diff --git a/arch/x86/kernel/cpu/mcheck/mce_32.c b/arch/x86/kernel/cpu/mcheck/mce_32.c
index a5182dc..774d87c 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_32.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_32.c
@@ -10,20 +10,20 @@
#include <linux/smp.h>
#include <linux/thread_info.h>
-#include <asm/processor.h>
+#include <asm/processor.h>
#include <asm/system.h>
#include <asm/mce.h>
#include "mce.h"
-int mce_disabled = 0;
+int mce_disabled;
int nr_mce_banks;
EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */
/* Handle unconfigured int18 (should never happen) */
-static void unexpected_machine_check(struct pt_regs * regs, long error_code)
-{
+static void unexpected_machine_check(struct pt_regs *regs, long error_code)
+{
printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
}
@@ -33,30 +33,30 @@
/* This has to be run for each processor */
void mcheck_init(struct cpuinfo_x86 *c)
{
- if (mce_disabled==1)
+ if (mce_disabled == 1)
return;
switch (c->x86_vendor) {
- case X86_VENDOR_AMD:
- amd_mcheck_init(c);
- break;
+ case X86_VENDOR_AMD:
+ amd_mcheck_init(c);
+ break;
- case X86_VENDOR_INTEL:
- if (c->x86==5)
- intel_p5_mcheck_init(c);
- if (c->x86==6)
- intel_p6_mcheck_init(c);
- if (c->x86==15)
- intel_p4_mcheck_init(c);
- break;
+ case X86_VENDOR_INTEL:
+ if (c->x86 == 5)
+ intel_p5_mcheck_init(c);
+ if (c->x86 == 6)
+ intel_p6_mcheck_init(c);
+ if (c->x86 == 15)
+ intel_p4_mcheck_init(c);
+ break;
- case X86_VENDOR_CENTAUR:
- if (c->x86==5)
- winchip_mcheck_init(c);
- break;
+ case X86_VENDOR_CENTAUR:
+ if (c->x86 == 5)
+ winchip_mcheck_init(c);
+ break;
- default:
- break;
+ default:
+ break;
}
}
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
index bf39409..00ccb6c 100644
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c
@@ -16,7 +16,7 @@
#include <linux/smp.h>
#include <linux/module.h>
-#include <asm/processor.h>
+#include <asm/processor.h>
#include <asm/system.h>
#include <asm/msr.h>
@@ -26,23 +26,26 @@
#define MCE_RATE 15*HZ /* timer rate is 15s */
-static void mce_checkregs (void *info)
+static void mce_checkregs(void *info)
{
u32 low, high;
int i;
- for (i=firstbank; i<nr_mce_banks; i++) {
- rdmsr (MSR_IA32_MC0_STATUS+i*4, low, high);
+ for (i = firstbank; i < nr_mce_banks; i++) {
+ rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
if (high & (1<<31)) {
printk(KERN_INFO "MCE: The hardware reports a non "
"fatal, correctable incident occurred on "
"CPU %d.\n",
smp_processor_id());
- printk (KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
+ printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
- /* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
- wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+ /*
+ * Scrub the error so we don't pick it up in MCE_RATE
+ * seconds time.
+ */
+ wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
/* Serialize */
wmb();
@@ -55,10 +58,10 @@
static DECLARE_DELAYED_WORK(mce_work, mce_work_fn);
static void mce_work_fn(struct work_struct *work)
-{
+{
on_each_cpu(mce_checkregs, NULL, 1, 1);
schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
-}
+}
static int __init init_nonfatal_mce_checker(void)
{
diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c
index a18310a..bfa5817 100644
--- a/arch/x86/kernel/cpu/mcheck/p5.c
+++ b/arch/x86/kernel/cpu/mcheck/p5.c
@@ -9,20 +9,20 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
-#include <asm/processor.h>
+#include <asm/processor.h>
#include <asm/system.h>
#include <asm/msr.h>
#include "mce.h"
/* Machine check handler for Pentium class Intel */
-static void pentium_machine_check(struct pt_regs * regs, long error_code)
+static void pentium_machine_check(struct pt_regs *regs, long error_code)
{
u32 loaddr, hi, lotype;
rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
printk(KERN_EMERG "CPU#%d: Machine Check Exception: 0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
- if(lotype&(1<<5))
+ if (lotype&(1<<5))
printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
add_taint(TAINT_MACHINE_CHECK);
}
@@ -31,13 +31,13 @@
void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
-
+
/*Check for MCE support */
- if( !cpu_has(c, X86_FEATURE_MCE) )
- return;
+ if (!cpu_has(c, X86_FEATURE_MCE))
+ return;
/* Default P5 to off as its often misconnected */
- if(mce_disabled != -1)
+ if (mce_disabled != -1)
return;
machine_check_vector = pentium_machine_check;
wmb();
@@ -47,7 +47,7 @@
rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
printk(KERN_INFO "Intel old style machine check architecture supported.\n");
- /* Enable MCE */
+ /* Enable MCE */
set_in_cr4(X86_CR4_MCE);
printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
}
diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c
index 7434260..62efc9c 100644
--- a/arch/x86/kernel/cpu/mcheck/p6.c
+++ b/arch/x86/kernel/cpu/mcheck/p6.c
@@ -9,23 +9,23 @@
#include <linux/interrupt.h>
#include <linux/smp.h>
-#include <asm/processor.h>
+#include <asm/processor.h>
#include <asm/system.h>
#include <asm/msr.h>
#include "mce.h"
/* Machine Check Handler For PII/PIII */
-static void intel_machine_check(struct pt_regs * regs, long error_code)
+static void intel_machine_check(struct pt_regs *regs, long error_code)
{
- int recover=1;
+ int recover = 1;
u32 alow, ahigh, high, low;
u32 mcgstl, mcgsth;
int i;
- rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+ rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
if (mcgstl & (1<<0)) /* Recoverable ? */
- recover=0;
+ recover = 0;
printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
smp_processor_id(), mcgsth, mcgstl);
@@ -55,30 +55,30 @@
}
if (recover & 2)
- panic ("CPU context corrupt");
+ panic("CPU context corrupt");
if (recover & 1)
- panic ("Unable to continue");
+ panic("Unable to continue");
- printk (KERN_EMERG "Attempting to continue.\n");
- /*
- * Do not clear the MSR_IA32_MCi_STATUS if the error is not
+ printk(KERN_EMERG "Attempting to continue.\n");
+ /*
+ * Do not clear the MSR_IA32_MCi_STATUS if the error is not
* recoverable/continuable.This will allow BIOS to look at the MSRs
* for errors if the OS could not log the error.
*/
- for (i=0; i<nr_mce_banks; i++) {
+ for (i = 0; i < nr_mce_banks; i++) {
unsigned int msr;
msr = MSR_IA32_MC0_STATUS+i*4;
- rdmsr (msr,low, high);
+ rdmsr(msr, low, high);
if (high & (1<<31)) {
/* Clear it */
- wrmsr (msr, 0UL, 0UL);
+ wrmsr(msr, 0UL, 0UL);
/* Serialize */
wmb();
add_taint(TAINT_MACHINE_CHECK);
}
}
mcgstl &= ~(1<<2);
- wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+ wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
}
/* Set up machine check reporting for processors with Intel style MCE */
@@ -86,21 +86,21 @@
{
u32 l, h;
int i;
-
+
/* Check for MCE support */
if (!cpu_has(c, X86_FEATURE_MCE))
return;
/* Check for PPro style MCA */
- if (!cpu_has(c, X86_FEATURE_MCA))
+ if (!cpu_has(c, X86_FEATURE_MCA))
return;
/* Ok machine check is available */
machine_check_vector = intel_machine_check;
wmb();
- printk (KERN_INFO "Intel machine check architecture supported.\n");
- rdmsr (MSR_IA32_MCG_CAP, l, h);
+ printk(KERN_INFO "Intel machine check architecture supported.\n");
+ rdmsr(MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
@@ -110,13 +110,13 @@
* - MC0_CTL should not be written
* - Status registers on all banks should be cleared on reset
*/
- for (i=1; i<nr_mce_banks; i++)
- wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+ for (i = 1; i < nr_mce_banks; i++)
+ wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
- for (i=0; i<nr_mce_banks; i++)
- wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+ for (i = 0; i < nr_mce_banks; i++)
+ wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
- set_in_cr4 (X86_CR4_MCE);
- printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+ set_in_cr4(X86_CR4_MCE);
+ printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
}
diff --git a/arch/x86/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c
index 3d428d5..f2be3e1 100644
--- a/arch/x86/kernel/cpu/mcheck/winchip.c
+++ b/arch/x86/kernel/cpu/mcheck/winchip.c
@@ -8,14 +8,14 @@
#include <linux/kernel.h>
#include <linux/interrupt.h>
-#include <asm/processor.h>
+#include <asm/processor.h>
#include <asm/system.h>
#include <asm/msr.h>
#include "mce.h"
/* Machine check handler for WinChip C6 */
-static void winchip_machine_check(struct pt_regs * regs, long error_code)
+static void winchip_machine_check(struct pt_regs *regs, long error_code)
{
printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
add_taint(TAINT_MACHINE_CHECK);
@@ -28,8 +28,8 @@
machine_check_vector = winchip_machine_check;
wmb();
rdmsr(MSR_IDT_FCR1, lo, hi);
- lo|= (1<<2); /* Enable EIERRINT (int 18 MCE) */
- lo&= ~(1<<4); /* Enable MCE */
+ lo |= (1<<2); /* Enable EIERRINT (int 18 MCE) */
+ lo &= ~(1<<4); /* Enable MCE */
wrmsr(MSR_IDT_FCR1, lo, hi);
set_in_cr4(X86_CR4_MCE);
printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 3e18db4..353efe4 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -11,6 +11,7 @@
#include <asm/cpufeature.h>
#include <asm/processor-flags.h>
#include <asm/tlbflush.h>
+#include <asm/pat.h>
#include "mtrr.h"
struct mtrr_state {
@@ -35,6 +36,8 @@
static unsigned long smp_changes_mask;
static struct mtrr_state mtrr_state = {};
+static int mtrr_state_set;
+static u64 tom2;
#undef MODULE_PARAM_PREFIX
#define MODULE_PARAM_PREFIX "mtrr."
@@ -42,6 +45,111 @@
static int mtrr_show;
module_param_named(show, mtrr_show, bool, 0);
+/*
+ * Returns the effective MTRR type for the region
+ * Error returns:
+ * - 0xFE - when the range is "not entirely covered" by _any_ var range MTRR
+ * - 0xFF - when MTRR is not enabled
+ */
+u8 mtrr_type_lookup(u64 start, u64 end)
+{
+ int i;
+ u64 base, mask;
+ u8 prev_match, curr_match;
+
+ if (!mtrr_state_set)
+ return 0xFF;
+
+ if (!mtrr_state.enabled)
+ return 0xFF;
+
+ /* Make end inclusive end, instead of exclusive */
+ end--;
+
+ /* Look in fixed ranges. Just return the type as per start */
+ if (mtrr_state.have_fixed && (start < 0x100000)) {
+ int idx;
+
+ if (start < 0x80000) {
+ idx = 0;
+ idx += (start >> 16);
+ return mtrr_state.fixed_ranges[idx];
+ } else if (start < 0xC0000) {
+ idx = 1 * 8;
+ idx += ((start - 0x80000) >> 14);
+ return mtrr_state.fixed_ranges[idx];
+ } else if (start < 0x1000000) {
+ idx = 3 * 8;
+ idx += ((start - 0xC0000) >> 12);
+ return mtrr_state.fixed_ranges[idx];
+ }
+ }
+
+ /*
+ * Look in variable ranges
+ * Look of multiple ranges matching this address and pick type
+ * as per MTRR precedence
+ */
+ if (!mtrr_state.enabled & 2) {
+ return mtrr_state.def_type;
+ }
+
+ prev_match = 0xFF;
+ for (i = 0; i < num_var_ranges; ++i) {
+ unsigned short start_state, end_state;
+
+ if (!(mtrr_state.var_ranges[i].mask_lo & (1 << 11)))
+ continue;
+
+ base = (((u64)mtrr_state.var_ranges[i].base_hi) << 32) +
+ (mtrr_state.var_ranges[i].base_lo & PAGE_MASK);
+ mask = (((u64)mtrr_state.var_ranges[i].mask_hi) << 32) +
+ (mtrr_state.var_ranges[i].mask_lo & PAGE_MASK);
+
+ start_state = ((start & mask) == (base & mask));
+ end_state = ((end & mask) == (base & mask));
+ if (start_state != end_state)
+ return 0xFE;
+
+ if ((start & mask) != (base & mask)) {
+ continue;
+ }
+
+ curr_match = mtrr_state.var_ranges[i].base_lo & 0xff;
+ if (prev_match == 0xFF) {
+ prev_match = curr_match;
+ continue;
+ }
+
+ if (prev_match == MTRR_TYPE_UNCACHABLE ||
+ curr_match == MTRR_TYPE_UNCACHABLE) {
+ return MTRR_TYPE_UNCACHABLE;
+ }
+
+ if ((prev_match == MTRR_TYPE_WRBACK &&
+ curr_match == MTRR_TYPE_WRTHROUGH) ||
+ (prev_match == MTRR_TYPE_WRTHROUGH &&
+ curr_match == MTRR_TYPE_WRBACK)) {
+ prev_match = MTRR_TYPE_WRTHROUGH;
+ curr_match = MTRR_TYPE_WRTHROUGH;
+ }
+
+ if (prev_match != curr_match) {
+ return MTRR_TYPE_UNCACHABLE;
+ }
+ }
+
+ if (tom2) {
+ if (start >= (1ULL<<32) && (end < tom2))
+ return MTRR_TYPE_WRBACK;
+ }
+
+ if (prev_match != 0xFF)
+ return prev_match;
+
+ return mtrr_state.def_type;
+}
+
/* Get the MSR pair relating to a var range */
static void
get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
@@ -79,12 +187,16 @@
base, base + step - 1, mtrr_attrib_to_str(*types));
}
+static void prepare_set(void);
+static void post_set(void);
+
/* Grab all of the MTRR state for this CPU into *state */
void __init get_mtrr_state(void)
{
unsigned int i;
struct mtrr_var_range *vrs;
unsigned lo, dummy;
+ unsigned long flags;
vrs = mtrr_state.var_ranges;
@@ -100,6 +212,15 @@
mtrr_state.def_type = (lo & 0xff);
mtrr_state.enabled = (lo & 0xc00) >> 10;
+ if (amd_special_default_mtrr()) {
+ unsigned lo, hi;
+ /* TOP_MEM2 */
+ rdmsr(MSR_K8_TOP_MEM2, lo, hi);
+ tom2 = hi;
+ tom2 <<= 32;
+ tom2 |= lo;
+ tom2 &= 0xffffff8000000ULL;
+ }
if (mtrr_show) {
int high_width;
@@ -130,7 +251,22 @@
else
printk(KERN_INFO "MTRR %u disabled\n", i);
}
+ if (tom2) {
+ printk(KERN_INFO "TOM2: %016llx aka %lldM\n",
+ tom2, tom2>>20);
+ }
}
+ mtrr_state_set = 1;
+
+ /* PAT setup for BP. We need to go through sync steps here */
+ local_irq_save(flags);
+ prepare_set();
+
+ pat_init();
+
+ post_set();
+ local_irq_restore(flags);
+
}
/* Some BIOS's are fucked and don't set all MTRRs the same! */
@@ -397,6 +533,9 @@
/* Actually set the state */
mask = set_mtrr_state();
+ /* also set PAT */
+ pat_init();
+
post_set();
local_irq_restore(flags);
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index 91e150a..1960f19 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -424,11 +424,10 @@
return -ENODEV;
proc_root_mtrr =
- create_proc_entry("mtrr", S_IWUSR | S_IRUGO, &proc_root);
- if (proc_root_mtrr) {
+ proc_create("mtrr", S_IWUSR | S_IRUGO, &proc_root, &mtrr_fops);
+
+ if (proc_root_mtrr)
proc_root_mtrr->owner = THIS_MODULE;
- proc_root_mtrr->proc_fops = &mtrr_fops;
- }
return 0;
}
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index a6450b3..6a1e278 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -627,7 +627,7 @@
#define Tom2Enabled (1U << 21)
#define Tom2ForceMemTypeWB (1U << 22)
-static __init int amd_special_default_mtrr(void)
+int __init amd_special_default_mtrr(void)
{
u32 l, h;
diff --git a/arch/x86/kernel/cpu/mtrr/state.c b/arch/x86/kernel/cpu/mtrr/state.c
index 9f8ba92..7f7e275 100644
--- a/arch/x86/kernel/cpu/mtrr/state.c
+++ b/arch/x86/kernel/cpu/mtrr/state.c
@@ -19,13 +19,15 @@
if (use_intel() || is_cpu(CYRIX)) {
/* Save value of CR4 and clear Page Global Enable (bit 7) */
- if ( cpu_has_pge ) {
+ if (cpu_has_pge) {
ctxt->cr4val = read_cr4();
write_cr4(ctxt->cr4val & ~X86_CR4_PGE);
}
- /* Disable and flush caches. Note that wbinvd flushes the TLBs as
- a side-effect */
+ /*
+ * Disable and flush caches. Note that wbinvd flushes the TLBs
+ * as a side-effect
+ */
cr0 = read_cr0() | X86_CR0_CD;
wbinvd();
write_cr0(cr0);
@@ -42,7 +44,7 @@
void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
{
- if (use_intel())
+ if (use_intel())
/* Disable MTRRs, and set the default type to uncached */
mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL,
ctxt->deftype_hi);
@@ -66,12 +68,12 @@
else
/* Cyrix ARRs - everything else was excluded at the top */
setCx86(CX86_CCR3, ctxt->ccr3);
-
+
/* Enable caches */
write_cr0(read_cr0() & 0xbfffffff);
/* Restore value of CR4 */
- if ( cpu_has_pge )
+ if (cpu_has_pge)
write_cr4(ctxt->cr4val);
}
/* Re-enable interrupts locally (if enabled previously) */
diff --git a/arch/x86/kernel/cpu/nexgen.c b/arch/x86/kernel/cpu/nexgen.c
index 961fbe1..5d5e1c1 100644
--- a/arch/x86/kernel/cpu/nexgen.c
+++ b/arch/x86/kernel/cpu/nexgen.c
@@ -9,11 +9,11 @@
* Detect a NexGen CPU running without BIOS hypercode new enough
* to have CPUID. (Thanks to Herbert Oppmann)
*/
-
+
static int __cpuinit deep_magic_nexgen_probe(void)
{
int ret;
-
+
__asm__ __volatile__ (
" movw $0x5555, %%ax\n"
" xorw %%dx,%%dx\n"
@@ -22,22 +22,21 @@
" movl $0, %%eax\n"
" jnz 1f\n"
" movl $1, %%eax\n"
- "1:\n"
- : "=a" (ret) : : "cx", "dx" );
+ "1:\n"
+ : "=a" (ret) : : "cx", "dx");
return ret;
}
-static void __cpuinit init_nexgen(struct cpuinfo_x86 * c)
+static void __cpuinit init_nexgen(struct cpuinfo_x86 *c)
{
c->x86_cache_size = 256; /* A few had 1 MB... */
}
-static void __cpuinit nexgen_identify(struct cpuinfo_x86 * c)
+static void __cpuinit nexgen_identify(struct cpuinfo_x86 *c)
{
/* Detect NexGen with old hypercode */
- if ( deep_magic_nexgen_probe() ) {
+ if (deep_magic_nexgen_probe())
strcpy(c->x86_vendor_id, "NexGenDriven");
- }
}
static struct cpu_dev nexgen_cpu_dev __cpuinitdata = {
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 9b83832..b943e10 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -652,9 +652,6 @@
wd_ops = &p6_wd_ops;
break;
case 15:
- if (boot_cpu_data.x86_model > 0x4)
- return;
-
wd_ops = &p4_wd_ops;
break;
default:
@@ -670,8 +667,10 @@
{
if (!wd_ops) {
probe_nmi_watchdog();
- if (!wd_ops)
+ if (!wd_ops) {
+ printk(KERN_INFO "NMI watchdog: CPU not supported\n");
return -1;
+ }
if (!wd_ops->reserve()) {
printk(KERN_ERR
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index af11d31..0978a4a 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -8,78 +8,139 @@
/*
* Get CPU information for use by the procfs.
*/
+#ifdef CONFIG_X86_32
+static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
+ unsigned int cpu)
+{
+#ifdef CONFIG_X86_HT
+ if (c->x86_max_cores * smp_num_siblings > 1) {
+ seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
+ seq_printf(m, "siblings\t: %d\n",
+ cpus_weight(per_cpu(cpu_core_map, cpu)));
+ seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
+ seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
+ seq_printf(m, "apicid\t\t: %d\n", c->apicid);
+ seq_printf(m, "initial apicid\t: %d\n", c->initial_apicid);
+ }
+#endif
+}
+
+static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
+{
+ /*
+ * We use exception 16 if we have hardware math and we've either seen
+ * it or the CPU claims it is internal
+ */
+ int fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu);
+ seq_printf(m,
+ "fdiv_bug\t: %s\n"
+ "hlt_bug\t\t: %s\n"
+ "f00f_bug\t: %s\n"
+ "coma_bug\t: %s\n"
+ "fpu\t\t: %s\n"
+ "fpu_exception\t: %s\n"
+ "cpuid level\t: %d\n"
+ "wp\t\t: %s\n",
+ c->fdiv_bug ? "yes" : "no",
+ c->hlt_works_ok ? "no" : "yes",
+ c->f00f_bug ? "yes" : "no",
+ c->coma_bug ? "yes" : "no",
+ c->hard_math ? "yes" : "no",
+ fpu_exception ? "yes" : "no",
+ c->cpuid_level,
+ c->wp_works_ok ? "yes" : "no");
+}
+#else
+static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
+ unsigned int cpu)
+{
+#ifdef CONFIG_SMP
+ if (c->x86_max_cores * smp_num_siblings > 1) {
+ seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
+ seq_printf(m, "siblings\t: %d\n",
+ cpus_weight(per_cpu(cpu_core_map, cpu)));
+ seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
+ seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
+ seq_printf(m, "apicid\t\t: %d\n", c->apicid);
+ seq_printf(m, "initial apicid\t: %d\n", c->initial_apicid);
+ }
+#endif
+}
+
+static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
+{
+ seq_printf(m,
+ "fpu\t\t: yes\n"
+ "fpu_exception\t: yes\n"
+ "cpuid level\t: %d\n"
+ "wp\t\t: yes\n",
+ c->cpuid_level);
+}
+#endif
+
static int show_cpuinfo(struct seq_file *m, void *v)
{
struct cpuinfo_x86 *c = v;
- int i, n = 0;
- int fpu_exception;
+ unsigned int cpu = 0;
+ int i;
#ifdef CONFIG_SMP
- n = c->cpu_index;
+ cpu = c->cpu_index;
#endif
- seq_printf(m, "processor\t: %d\n"
- "vendor_id\t: %s\n"
- "cpu family\t: %d\n"
- "model\t\t: %d\n"
- "model name\t: %s\n",
- n,
- c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
- c->x86,
- c->x86_model,
- c->x86_model_id[0] ? c->x86_model_id : "unknown");
+ seq_printf(m, "processor\t: %u\n"
+ "vendor_id\t: %s\n"
+ "cpu family\t: %d\n"
+ "model\t\t: %u\n"
+ "model name\t: %s\n",
+ cpu,
+ c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
+ c->x86,
+ c->x86_model,
+ c->x86_model_id[0] ? c->x86_model_id : "unknown");
if (c->x86_mask || c->cpuid_level >= 0)
seq_printf(m, "stepping\t: %d\n", c->x86_mask);
else
seq_printf(m, "stepping\t: unknown\n");
- if ( cpu_has(c, X86_FEATURE_TSC) ) {
- unsigned int freq = cpufreq_quick_get(n);
+ if (cpu_has(c, X86_FEATURE_TSC)) {
+ unsigned int freq = cpufreq_quick_get(cpu);
+
if (!freq)
freq = cpu_khz;
seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
- freq / 1000, (freq % 1000));
+ freq / 1000, (freq % 1000));
}
/* Cache size */
if (c->x86_cache_size >= 0)
seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
-#ifdef CONFIG_X86_HT
- if (c->x86_max_cores * smp_num_siblings > 1) {
- seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
- seq_printf(m, "siblings\t: %d\n",
- cpus_weight(per_cpu(cpu_core_map, n)));
- seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
- seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
- }
-#endif
-
- /* We use exception 16 if we have hardware math and we've either seen it or the CPU claims it is internal */
- fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu);
- seq_printf(m, "fdiv_bug\t: %s\n"
- "hlt_bug\t\t: %s\n"
- "f00f_bug\t: %s\n"
- "coma_bug\t: %s\n"
- "fpu\t\t: %s\n"
- "fpu_exception\t: %s\n"
- "cpuid level\t: %d\n"
- "wp\t\t: %s\n"
- "flags\t\t:",
- c->fdiv_bug ? "yes" : "no",
- c->hlt_works_ok ? "no" : "yes",
- c->f00f_bug ? "yes" : "no",
- c->coma_bug ? "yes" : "no",
- c->hard_math ? "yes" : "no",
- fpu_exception ? "yes" : "no",
- c->cpuid_level,
- c->wp_works_ok ? "yes" : "no");
- for ( i = 0 ; i < 32*NCAPINTS ; i++ )
- if ( test_bit(i, c->x86_capability) &&
- x86_cap_flags[i] != NULL )
+ show_cpuinfo_core(m, c, cpu);
+ show_cpuinfo_misc(m, c);
+
+ seq_printf(m, "flags\t\t:");
+ for (i = 0; i < 32*NCAPINTS; i++)
+ if (cpu_has(c, i) && x86_cap_flags[i] != NULL)
seq_printf(m, " %s", x86_cap_flags[i]);
- for (i = 0; i < 32; i++)
+ seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
+ c->loops_per_jiffy/(500000/HZ),
+ (c->loops_per_jiffy/(5000/HZ)) % 100);
+
+#ifdef CONFIG_X86_64
+ if (c->x86_tlbsize > 0)
+ seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize);
+#endif
+ seq_printf(m, "clflush size\t: %u\n", c->x86_clflush_size);
+#ifdef CONFIG_X86_64
+ seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment);
+ seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n",
+ c->x86_phys_bits, c->x86_virt_bits);
+#endif
+
+ seq_printf(m, "power management:");
+ for (i = 0; i < 32; i++) {
if (c->x86_power & (1 << i)) {
if (i < ARRAY_SIZE(x86_power_flags) &&
x86_power_flags[i])
@@ -89,11 +150,9 @@
else
seq_printf(m, " [%d]", i);
}
+ }
- seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
- c->loops_per_jiffy/(500000/HZ),
- (c->loops_per_jiffy/(5000/HZ)) % 100);
- seq_printf(m, "clflush size\t: %u\n\n", c->x86_clflush_size);
+ seq_printf(m, "\n\n");
return 0;
}
@@ -106,14 +165,17 @@
return &cpu_data(*pos);
return NULL;
}
+
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
*pos = next_cpu(*pos, cpu_online_map);
return c_start(m, pos);
}
+
static void c_stop(struct seq_file *m, void *v)
{
}
+
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c
index e8b422c..b911a2c 100644
--- a/arch/x86/kernel/cpu/transmeta.c
+++ b/arch/x86/kernel/cpu/transmeta.c
@@ -18,8 +18,8 @@
/* Print CMS and CPU revision */
max = cpuid_eax(0x80860000);
cpu_rev = 0;
- if ( max >= 0x80860001 ) {
- cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags);
+ if (max >= 0x80860001) {
+ cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags);
if (cpu_rev != 0x02000000) {
printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
(cpu_rev >> 24) & 0xff,
@@ -29,7 +29,7 @@
cpu_freq);
}
}
- if ( max >= 0x80860002 ) {
+ if (max >= 0x80860002) {
cpuid(0x80860002, &new_cpu_rev, &cms_rev1, &cms_rev2, &dummy);
if (cpu_rev == 0x02000000) {
printk(KERN_INFO "CPU: Processor revision %08X, %u MHz\n",
@@ -42,7 +42,7 @@
cms_rev1 & 0xff,
cms_rev2);
}
- if ( max >= 0x80860006 ) {
+ if (max >= 0x80860006) {
cpuid(0x80860003,
(void *)&cpu_info[0],
(void *)&cpu_info[4],
@@ -74,23 +74,25 @@
wrmsr(0x80860004, cap_mask, uk);
/* All Transmeta CPUs have a constant TSC */
- set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
-
+ set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
#ifdef CONFIG_SYSCTL
- /* randomize_va_space slows us down enormously;
- it probably triggers retranslation of x86->native bytecode */
+ /*
+ * randomize_va_space slows us down enormously;
+ * it probably triggers retranslation of x86->native bytecode
+ */
randomize_va_space = 0;
#endif
}
-static void __cpuinit transmeta_identify(struct cpuinfo_x86 * c)
+static void __cpuinit transmeta_identify(struct cpuinfo_x86 *c)
{
u32 xlvl;
/* Transmeta-defined flags: level 0x80860001 */
xlvl = cpuid_eax(0x80860000);
- if ( (xlvl & 0xffff0000) == 0x80860000 ) {
- if ( xlvl >= 0x80860001 )
+ if ((xlvl & 0xffff0000) == 0x80860000) {
+ if (xlvl >= 0x80860001)
c->x86_capability[2] = cpuid_edx(0x80860001);
}
}
@@ -102,8 +104,4 @@
.c_identify = transmeta_identify,
};
-int __init transmeta_init_cpu(void)
-{
- cpu_devs[X86_VENDOR_TRANSMETA] = &transmeta_cpu_dev;
- return 0;
-}
+cpu_vendor_dev_register(X86_VENDOR_TRANSMETA, &transmeta_cpu_dev);
diff --git a/arch/x86/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c
index a7a4e75..b1fc909 100644
--- a/arch/x86/kernel/cpu/umc.c
+++ b/arch/x86/kernel/cpu/umc.c
@@ -3,24 +3,23 @@
#include <asm/processor.h>
#include "cpu.h"
-/* UMC chips appear to be only either 386 or 486, so no special init takes place.
+/*
+ * UMC chips appear to be only either 386 or 486,
+ * so no special init takes place.
*/
static struct cpu_dev umc_cpu_dev __cpuinitdata = {
.c_vendor = "UMC",
- .c_ident = { "UMC UMC UMC" },
+ .c_ident = { "UMC UMC UMC" },
.c_models = {
{ .vendor = X86_VENDOR_UMC, .family = 4, .model_names =
- {
- [1] = "U5D",
- [2] = "U5S",
+ {
+ [1] = "U5D",
+ [2] = "U5S",
}
},
},
};
-int __init umc_init_cpu(void)
-{
- cpu_devs[X86_VENDOR_UMC] = &umc_cpu_dev;
- return 0;
-}
+cpu_vendor_dev_register(X86_VENDOR_UMC, &umc_cpu_dev);
+
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 9a5fa0a..2251d0a 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -26,11 +26,7 @@
#include <linux/kdebug.h>
#include <asm/smp.h>
-#ifdef CONFIG_X86_32
#include <mach_ipi.h>
-#else
-#include <asm/mach_apic.h>
-#endif
/* This keeps a track of which one is crashing cpu. */
static int crashing_cpu;
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index dcd918c..11c11b8 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -220,11 +220,11 @@
int ds_free(void **dsp)
{
- if (*dsp)
+ if (*dsp) {
kfree((void *)get_bts_buffer_base(*dsp));
- kfree(*dsp);
- *dsp = NULL;
-
+ kfree(*dsp);
+ *dsp = NULL;
+ }
return 0;
}
diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c
index 80444c5..0240cd7 100644
--- a/arch/x86/kernel/e820_32.c
+++ b/arch/x86/kernel/e820_32.c
@@ -450,38 +450,25 @@
* thinkpad 560x, for example, does not cooperate with the memory
* detection code.)
*/
-int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
+int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
{
/* Only one memory region (or negative)? Ignore it */
if (nr_map < 2)
return -1;
do {
- unsigned long long start = biosmap->addr;
- unsigned long long size = biosmap->size;
- unsigned long long end = start + size;
- unsigned long type = biosmap->type;
+ u64 start = biosmap->addr;
+ u64 size = biosmap->size;
+ u64 end = start + size;
+ u32 type = biosmap->type;
/* Overflow in 64 bits? Ignore the memory map. */
if (start > end)
return -1;
- /*
- * Some BIOSes claim RAM in the 640k - 1M region.
- * Not right. Fix it up.
- */
- if (type == E820_RAM) {
- if (start < 0x100000ULL && end > 0xA0000ULL) {
- if (start < 0xA0000ULL)
- add_memory_region(start, 0xA0000ULL-start, type);
- if (end <= 0x100000ULL)
- continue;
- start = 0x100000ULL;
- size = end - start;
- }
- }
add_memory_region(start, size, type);
- } while (biosmap++,--nr_map);
+ } while (biosmap++, --nr_map);
+
return 0;
}
diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c
index 9be6971..7f6c0c8 100644
--- a/arch/x86/kernel/e820_64.c
+++ b/arch/x86/kernel/e820_64.c
@@ -27,6 +27,7 @@
#include <asm/setup.h>
#include <asm/sections.h>
#include <asm/kdebug.h>
+#include <asm/trampoline.h>
struct e820map e820;
@@ -36,11 +37,11 @@
unsigned long end_pfn;
/*
- * end_pfn only includes RAM, while end_pfn_map includes all e820 entries.
- * The direct mapping extends to end_pfn_map, so that we can directly access
+ * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
+ * The direct mapping extends to max_pfn_mapped, so that we can directly access
* apertures, ACPI and other tables without having to play with fixmaps.
*/
-unsigned long end_pfn_map;
+unsigned long max_pfn_mapped;
/*
* Last pfn which the user wants to use.
@@ -58,8 +59,8 @@
};
static struct early_res early_res[MAX_EARLY_RES] __initdata = {
{ 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */
-#ifdef CONFIG_SMP
- { SMP_TRAMPOLINE_BASE, SMP_TRAMPOLINE_BASE + 2*PAGE_SIZE, "SMP_TRAMPOLINE" },
+#ifdef CONFIG_X86_TRAMPOLINE
+ { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" },
#endif
{}
};
@@ -95,7 +96,8 @@
}
/* Check for already reserved areas */
-static inline int bad_addr(unsigned long *addrp, unsigned long size)
+static inline int
+bad_addr(unsigned long *addrp, unsigned long size, unsigned long align)
{
int i;
unsigned long addr = *addrp, last;
@@ -105,7 +107,7 @@
for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
struct early_res *r = &early_res[i];
if (last >= r->start && addr < r->end) {
- *addrp = addr = r->end;
+ *addrp = addr = round_up(r->end, align);
changed = 1;
goto again;
}
@@ -113,6 +115,40 @@
return changed;
}
+/* Check for already reserved areas */
+static inline int
+bad_addr_size(unsigned long *addrp, unsigned long *sizep, unsigned long align)
+{
+ int i;
+ unsigned long addr = *addrp, last;
+ unsigned long size = *sizep;
+ int changed = 0;
+again:
+ last = addr + size;
+ for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+ struct early_res *r = &early_res[i];
+ if (last > r->start && addr < r->start) {
+ size = r->start - addr;
+ changed = 1;
+ goto again;
+ }
+ if (last > r->end && addr < r->end) {
+ addr = round_up(r->end, align);
+ size = last - addr;
+ changed = 1;
+ goto again;
+ }
+ if (last <= r->end && addr >= r->start) {
+ (*sizep)++;
+ return 0;
+ }
+ }
+ if (changed) {
+ *addrp = addr;
+ *sizep = size;
+ }
+ return changed;
+}
/*
* This function checks if any part of the range <start,end> is mapped
* with type.
@@ -174,26 +210,27 @@
* Find a free area with specified alignment in a specific range.
*/
unsigned long __init find_e820_area(unsigned long start, unsigned long end,
- unsigned size, unsigned long align)
+ unsigned long size, unsigned long align)
{
int i;
- unsigned long mask = ~(align - 1);
for (i = 0; i < e820.nr_map; i++) {
struct e820entry *ei = &e820.map[i];
- unsigned long addr = ei->addr, last;
+ unsigned long addr, last;
+ unsigned long ei_last;
if (ei->type != E820_RAM)
continue;
+ addr = round_up(ei->addr, align);
+ ei_last = ei->addr + ei->size;
if (addr < start)
- addr = start;
- if (addr > ei->addr + ei->size)
+ addr = round_up(start, align);
+ if (addr >= ei_last)
continue;
- while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size)
+ while (bad_addr(&addr, size, align) && addr+size <= ei_last)
;
- addr = (addr + align - 1) & mask;
last = addr + size;
- if (last > ei->addr + ei->size)
+ if (last > ei_last)
continue;
if (last > end)
continue;
@@ -203,6 +240,40 @@
}
/*
+ * Find next free range after *start
+ */
+unsigned long __init find_e820_area_size(unsigned long start,
+ unsigned long *sizep,
+ unsigned long align)
+{
+ int i;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ unsigned long addr, last;
+ unsigned long ei_last;
+
+ if (ei->type != E820_RAM)
+ continue;
+ addr = round_up(ei->addr, align);
+ ei_last = ei->addr + ei->size;
+ if (addr < start)
+ addr = round_up(start, align);
+ if (addr >= ei_last)
+ continue;
+ *sizep = ei_last - addr;
+ while (bad_addr_size(&addr, sizep, align) &&
+ addr + *sizep <= ei_last)
+ ;
+ last = addr + *sizep;
+ if (last > ei_last)
+ continue;
+ return addr;
+ }
+ return -1UL;
+
+}
+/*
* Find the highest page frame number we have available
*/
unsigned long __init e820_end_of_ram(void)
@@ -211,29 +282,29 @@
end_pfn = find_max_pfn_with_active_regions();
- if (end_pfn > end_pfn_map)
- end_pfn_map = end_pfn;
- if (end_pfn_map > MAXMEM>>PAGE_SHIFT)
- end_pfn_map = MAXMEM>>PAGE_SHIFT;
+ if (end_pfn > max_pfn_mapped)
+ max_pfn_mapped = end_pfn;
+ if (max_pfn_mapped > MAXMEM>>PAGE_SHIFT)
+ max_pfn_mapped = MAXMEM>>PAGE_SHIFT;
if (end_pfn > end_user_pfn)
end_pfn = end_user_pfn;
- if (end_pfn > end_pfn_map)
- end_pfn = end_pfn_map;
+ if (end_pfn > max_pfn_mapped)
+ end_pfn = max_pfn_mapped;
- printk(KERN_INFO "end_pfn_map = %lu\n", end_pfn_map);
+ printk(KERN_INFO "max_pfn_mapped = %lu\n", max_pfn_mapped);
return end_pfn;
}
/*
* Mark e820 reserved areas as busy for the resource manager.
*/
-void __init e820_reserve_resources(struct resource *code_resource,
- struct resource *data_resource, struct resource *bss_resource)
+void __init e820_reserve_resources(void)
{
int i;
+ struct resource *res;
+
+ res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
for (i = 0; i < e820.nr_map; i++) {
- struct resource *res;
- res = alloc_bootmem_low(sizeof(struct resource));
switch (e820.map[i].type) {
case E820_RAM: res->name = "System RAM"; break;
case E820_ACPI: res->name = "ACPI Tables"; break;
@@ -243,21 +314,8 @@
res->start = e820.map[i].addr;
res->end = res->start + e820.map[i].size - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- request_resource(&iomem_resource, res);
- if (e820.map[i].type == E820_RAM) {
- /*
- * We don't know which RAM region contains kernel data,
- * so we try it repeatedly and let the resource manager
- * test it.
- */
- request_resource(res, code_resource);
- request_resource(res, data_resource);
- request_resource(res, bss_resource);
-#ifdef CONFIG_KEXEC
- if (crashk_res.start != crashk_res.end)
- request_resource(res, &crashk_res);
-#endif
- }
+ insert_resource(&iomem_resource, res);
+ res++;
}
}
@@ -309,9 +367,9 @@
if (*ei_startpfn >= *ei_endpfn)
return 0;
- /* Check if end_pfn_map should be updated */
- if (ei->type != E820_RAM && *ei_endpfn > end_pfn_map)
- end_pfn_map = *ei_endpfn;
+ /* Check if max_pfn_mapped should be updated */
+ if (ei->type != E820_RAM && *ei_endpfn > max_pfn_mapped)
+ max_pfn_mapped = *ei_endpfn;
/* Skip if map is outside the node */
if (ei->type != E820_RAM || *ei_endpfn <= start_pfn ||
@@ -634,10 +692,10 @@
return -1;
do {
- unsigned long start = biosmap->addr;
- unsigned long size = biosmap->size;
- unsigned long end = start + size;
- unsigned long type = biosmap->type;
+ u64 start = biosmap->addr;
+ u64 size = biosmap->size;
+ u64 end = start + size;
+ u32 type = biosmap->type;
/* Overflow in 64 bits? Ignore the memory map. */
if (start > end)
@@ -702,7 +760,7 @@
saved_max_pfn = e820_end_of_ram();
remove_all_active_ranges();
#endif
- end_pfn_map = 0;
+ max_pfn_mapped = 0;
e820.nr_map = 0;
userdef = 1;
return 0;
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index cff84cd..643fd86 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -13,7 +13,7 @@
#define VGABASE (__ISA_IO_base + 0xb8000)
static int max_ypos = 25, max_xpos = 80;
-static int current_ypos = 25, current_xpos = 0;
+static int current_ypos = 25, current_xpos;
static void early_vga_write(struct console *con, const char *str, unsigned n)
{
@@ -108,12 +108,12 @@
if (*s) {
unsigned port;
- if (!strncmp(s,"0x",2)) {
+ if (!strncmp(s, "0x", 2)) {
early_serial_base = simple_strtoul(s, &e, 16);
} else {
static int bases[] = { 0x3f8, 0x2f8 };
- if (!strncmp(s,"ttyS",4))
+ if (!strncmp(s, "ttyS", 4))
s += 4;
port = simple_strtoul(s, &e, 10);
if (port > 1 || s == e)
@@ -194,7 +194,7 @@
/* Direct interface for emergencies */
static struct console *early_console = &early_vga_console;
-static int early_console_initialized = 0;
+static int early_console_initialized;
void early_printk(const char *fmt, ...)
{
@@ -202,9 +202,9 @@
int n;
va_list ap;
- va_start(ap,fmt);
- n = vscnprintf(buf,512,fmt,ap);
- early_console->write(early_console,buf,n);
+ va_start(ap, fmt);
+ n = vscnprintf(buf, 512, fmt, ap);
+ early_console->write(early_console, buf, n);
va_end(ap);
}
@@ -229,15 +229,15 @@
early_serial_init(buf);
early_console = &early_serial_console;
} else if (!strncmp(buf, "vga", 3)
- && boot_params.screen_info.orig_video_isVGA == 1) {
+ && boot_params.screen_info.orig_video_isVGA == 1) {
max_xpos = boot_params.screen_info.orig_video_cols;
max_ypos = boot_params.screen_info.orig_video_lines;
current_ypos = boot_params.screen_info.orig_y;
early_console = &early_vga_console;
- } else if (!strncmp(buf, "simnow", 6)) {
- simnow_init(buf + 6);
- early_console = &simnow_console;
- keep_early = 1;
+ } else if (!strncmp(buf, "simnow", 6)) {
+ simnow_init(buf + 6);
+ early_console = &simnow_console;
+ keep_early = 1;
#ifdef CONFIG_HVC_XEN
} else if (!strncmp(buf, "xen", 3)) {
early_console = &xenboot_console;
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 4b87c32..9ba49a2 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -51,6 +51,7 @@
#include <asm/desc.h>
#include <asm/percpu.h>
#include <asm/dwarf2.h>
+#include <asm/processor-flags.h>
#include "irq_vectors.h"
/*
@@ -68,13 +69,6 @@
#define nr_syscalls ((syscall_table_size)/4)
-CF_MASK = 0x00000001
-TF_MASK = 0x00000100
-IF_MASK = 0x00000200
-DF_MASK = 0x00000400
-NT_MASK = 0x00004000
-VM_MASK = 0x00020000
-
#ifdef CONFIG_PREEMPT
#define preempt_stop(clobbers) DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
#else
@@ -84,7 +78,7 @@
.macro TRACE_IRQS_IRET
#ifdef CONFIG_TRACE_IRQFLAGS
- testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off?
+ testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off?
jz 1f
TRACE_IRQS_ON
1:
@@ -246,7 +240,7 @@
check_userspace:
movl PT_EFLAGS(%esp), %eax # mix EFLAGS and CS
movb PT_CS(%esp), %al
- andl $(VM_MASK | SEGMENT_RPL_MASK), %eax
+ andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
cmpl $USER_RPL, %eax
jb resume_kernel # not returning to v8086 or userspace
@@ -271,7 +265,7 @@
movl TI_flags(%ebp), %ecx # need_resched set ?
testb $_TIF_NEED_RESCHED, %cl
jz restore_all
- testl $IF_MASK,PT_EFLAGS(%esp) # interrupts off (exception path) ?
+ testl $X86_EFLAGS_IF,PT_EFLAGS(%esp) # interrupts off (exception path) ?
jz restore_all
call preempt_schedule_irq
jmp need_resched
@@ -291,10 +285,10 @@
movl TSS_sysenter_sp0(%esp),%esp
sysenter_past_esp:
/*
- * No need to follow this irqs on/off section: the syscall
- * disabled irqs and here we enable it straight after entry:
+ * Interrupts are disabled here, but we can't trace it until
+ * enough kernel state to call TRACE_IRQS_OFF can be called - but
+ * we immediately enable interrupts at that point anyway.
*/
- ENABLE_INTERRUPTS(CLBR_NONE)
pushl $(__USER_DS)
CFI_ADJUST_CFA_OFFSET 4
/*CFI_REL_OFFSET ss, 0*/
@@ -302,6 +296,7 @@
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET esp, 0
pushfl
+ orl $X86_EFLAGS_IF, (%esp)
CFI_ADJUST_CFA_OFFSET 4
pushl $(__USER_CS)
CFI_ADJUST_CFA_OFFSET 4
@@ -315,6 +310,11 @@
CFI_ADJUST_CFA_OFFSET 4
CFI_REL_OFFSET eip, 0
+ pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ SAVE_ALL
+ ENABLE_INTERRUPTS(CLBR_NONE)
+
/*
* Load the potential sixth argument from user stack.
* Careful about security.
@@ -322,14 +322,12 @@
cmpl $__PAGE_OFFSET-3,%ebp
jae syscall_fault
1: movl (%ebp),%ebp
+ movl %ebp,PT_EBP(%esp)
.section __ex_table,"a"
.align 4
.long 1b,syscall_fault
.previous
- pushl %eax
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
GET_THREAD_INFO(%ebp)
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
@@ -384,7 +382,7 @@
# setting need_resched or sigpending
# between sampling and the iret
TRACE_IRQS_OFF
- testl $TF_MASK,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit
+ testl $X86_EFLAGS_TF,PT_EFLAGS(%esp) # If tracing set singlestep flag on exit
jz no_singlestep
orl $_TIF_SINGLESTEP,TI_flags(%ebp)
no_singlestep:
@@ -399,7 +397,7 @@
# See comments in process.c:copy_thread() for details.
movb PT_OLDSS(%esp), %ah
movb PT_CS(%esp), %al
- andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+ andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
CFI_REMEMBER_STATE
je ldt_ss # returning to user-space with LDT SS
@@ -486,7 +484,7 @@
work_notifysig: # deal with pending signals and
# notify-resume requests
#ifdef CONFIG_VM86
- testl $VM_MASK, PT_EFLAGS(%esp)
+ testl $X86_EFLAGS_VM, PT_EFLAGS(%esp)
movl %esp, %eax
jne work_notifysig_v86 # returning to kernel-space or
# vm86-space
@@ -543,9 +541,6 @@
RING0_INT_FRAME # can't unwind into user space anyway
syscall_fault:
- pushl %eax # save orig_eax
- CFI_ADJUST_CFA_OFFSET 4
- SAVE_ALL
GET_THREAD_INFO(%ebp)
movl $-EFAULT,PT_EAX(%esp)
jmp resume_userspace
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index c20c9e7..556a8df 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -319,19 +319,17 @@
/* Do syscall tracing */
tracesys:
SAVE_REST
- movq $-ENOSYS,RAX(%rsp)
+ movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
FIXUP_TOP_OF_STACK %rdi
movq %rsp,%rdi
call syscall_trace_enter
LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
cmpq $__NR_syscall_max,%rax
- movq $-ENOSYS,%rcx
- cmova %rcx,%rax
- ja 1f
+ ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */
movq %r10,%rcx /* fixup for C */
call *sys_call_table(,%rax,8)
-1: movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX-ARGOFFSET(%rsp)
/* Use IRET because user could have changed frame */
/*
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 4ae7b64..9546ef4 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/init.h>
+#include <linux/hardirq.h>
#include <asm/smp.h>
#include <asm/ipi.h>
@@ -24,20 +25,20 @@
#include <acpi/acpi_bus.h>
#endif
-/* which logical CPU number maps to which CPU (physical APIC ID) */
-u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata
- = { [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_cpu_to_apicid_early_ptr;
-DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
+DEFINE_PER_CPU(int, x2apic_extra_bits);
struct genapic __read_mostly *genapic = &apic_flat;
+static enum uv_system_type uv_system_type;
+
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
void __init setup_apic_routing(void)
{
+ if (uv_system_type == UV_NON_UNIQUE_APIC)
+ genapic = &apic_x2apic_uv_x;
+ else
#ifdef CONFIG_ACPI
/*
* Quirk: some x86_64 machines can only use physical APIC mode
@@ -64,3 +65,37 @@
{
__send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
}
+
+int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ if (!strcmp(oem_id, "SGI")) {
+ if (!strcmp(oem_table_id, "UVL"))
+ uv_system_type = UV_LEGACY_APIC;
+ else if (!strcmp(oem_table_id, "UVX"))
+ uv_system_type = UV_X2APIC;
+ else if (!strcmp(oem_table_id, "UVH"))
+ uv_system_type = UV_NON_UNIQUE_APIC;
+ }
+ return 0;
+}
+
+unsigned int read_apic_id(void)
+{
+ unsigned int id;
+
+ WARN_ON(preemptible());
+ id = apic_read(APIC_ID);
+ if (uv_system_type >= UV_X2APIC)
+ id |= __get_cpu_var(x2apic_extra_bits);
+ return id;
+}
+
+enum uv_system_type get_uv_system_type(void)
+{
+ return uv_system_type;
+}
+
+int is_uv_system(void)
+{
+ return uv_system_type != UV_NONE;
+}
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 07352b7..1a9c688 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -97,7 +97,7 @@
static int flat_apic_id_registered(void)
{
- return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
+ return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
}
static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask)
@@ -138,12 +138,9 @@
static cpumask_t physflat_vector_allocation_domain(int cpu)
{
- cpumask_t domain = CPU_MASK_NONE;
- cpu_set(cpu, domain);
- return domain;
+ return cpumask_of_cpu(cpu);
}
-
static void physflat_send_IPI_mask(cpumask_t cpumask, int vector)
{
send_IPI_mask_sequence(cpumask, vector);
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
new file mode 100644
index 0000000..5d77c9c
--- /dev/null
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -0,0 +1,245 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV APIC functions (note: not an Intel compatible APIC)
+ *
+ * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <asm/smp.h>
+#include <asm/ipi.h>
+#include <asm/genapic.h>
+#include <asm/uv/uv_mmrs.h>
+#include <asm/uv/uv_hub.h>
+
+DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+
+struct uv_blade_info *uv_blade_info;
+EXPORT_SYMBOL_GPL(uv_blade_info);
+
+short *uv_node_to_blade;
+EXPORT_SYMBOL_GPL(uv_node_to_blade);
+
+short *uv_cpu_to_blade;
+EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
+
+short uv_possible_blades;
+EXPORT_SYMBOL_GPL(uv_possible_blades);
+
+/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */
+
+static cpumask_t uv_target_cpus(void)
+{
+ return cpumask_of_cpu(0);
+}
+
+static cpumask_t uv_vector_allocation_domain(int cpu)
+{
+ cpumask_t domain = CPU_MASK_NONE;
+ cpu_set(cpu, domain);
+ return domain;
+}
+
+int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
+{
+ unsigned long val;
+ int nasid;
+
+ nasid = uv_apicid_to_nasid(phys_apicid);
+ val = (1UL << UVH_IPI_INT_SEND_SHFT) |
+ (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
+ (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
+ (6 << UVH_IPI_INT_DELIVERY_MODE_SHFT);
+ uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+ return 0;
+}
+
+static void uv_send_IPI_one(int cpu, int vector)
+{
+ unsigned long val, apicid;
+ int nasid;
+
+ apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */
+ nasid = uv_apicid_to_nasid(apicid);
+ val =
+ (1UL << UVH_IPI_INT_SEND_SHFT) | (apicid <<
+ UVH_IPI_INT_APIC_ID_SHFT) |
+ (vector << UVH_IPI_INT_VECTOR_SHFT);
+ uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+ printk(KERN_DEBUG
+ "UV: IPI to cpu %d, apicid 0x%lx, vec %d, nasid%d, val 0x%lx\n",
+ cpu, apicid, vector, nasid, val);
+}
+
+static void uv_send_IPI_mask(cpumask_t mask, int vector)
+{
+ unsigned int cpu;
+
+ for (cpu = 0; cpu < NR_CPUS; ++cpu)
+ if (cpu_isset(cpu, mask))
+ uv_send_IPI_one(cpu, vector);
+}
+
+static void uv_send_IPI_allbutself(int vector)
+{
+ cpumask_t mask = cpu_online_map;
+
+ cpu_clear(smp_processor_id(), mask);
+
+ if (!cpus_empty(mask))
+ uv_send_IPI_mask(mask, vector);
+}
+
+static void uv_send_IPI_all(int vector)
+{
+ uv_send_IPI_mask(cpu_online_map, vector);
+}
+
+static int uv_apic_id_registered(void)
+{
+ return 1;
+}
+
+static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ int cpu;
+
+ /*
+ * We're using fixed IRQ delivery, can only return one phys APIC ID.
+ * May as well be the first.
+ */
+ cpu = first_cpu(cpumask);
+ if ((unsigned)cpu < NR_CPUS)
+ return per_cpu(x86_cpu_to_apicid, cpu);
+ else
+ return BAD_APICID;
+}
+
+static unsigned int phys_pkg_id(int index_msb)
+{
+ return GET_APIC_ID(read_apic_id()) >> index_msb;
+}
+
+#ifdef ZZZ /* Needs x2apic patch */
+static void uv_send_IPI_self(int vector)
+{
+ apic_write(APIC_SELF_IPI, vector);
+}
+#endif
+
+struct genapic apic_x2apic_uv_x = {
+ .name = "UV large system",
+ .int_delivery_mode = dest_Fixed,
+ .int_dest_mode = (APIC_DEST_PHYSICAL != 0),
+ .target_cpus = uv_target_cpus,
+ .vector_allocation_domain = uv_vector_allocation_domain,/* Fixme ZZZ */
+ .apic_id_registered = uv_apic_id_registered,
+ .send_IPI_all = uv_send_IPI_all,
+ .send_IPI_allbutself = uv_send_IPI_allbutself,
+ .send_IPI_mask = uv_send_IPI_mask,
+ /* ZZZ.send_IPI_self = uv_send_IPI_self, */
+ .cpu_mask_to_apicid = uv_cpu_mask_to_apicid,
+ .phys_pkg_id = phys_pkg_id, /* Fixme ZZZ */
+};
+
+static __cpuinit void set_x2apic_extra_bits(int nasid)
+{
+ __get_cpu_var(x2apic_extra_bits) = ((nasid >> 1) << 6);
+}
+
+/*
+ * Called on boot cpu.
+ */
+static __init void uv_system_init(void)
+{
+ union uvh_si_addr_map_config_u m_n_config;
+ int bytes, nid, cpu, lcpu, nasid, last_nasid, blade;
+ unsigned long mmr_base;
+
+ m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+ mmr_base =
+ uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
+ ~UV_MMR_ENABLE;
+ printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
+
+ last_nasid = -1;
+ for_each_possible_cpu(cpu) {
+ nid = cpu_to_node(cpu);
+ nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu));
+ if (nasid != last_nasid)
+ uv_possible_blades++;
+ last_nasid = nasid;
+ }
+ printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades());
+
+ bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
+ uv_blade_info = alloc_bootmem_pages(bytes);
+
+ bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes();
+ uv_node_to_blade = alloc_bootmem_pages(bytes);
+ memset(uv_node_to_blade, 255, bytes);
+
+ bytes = sizeof(uv_cpu_to_blade[0]) * num_possible_cpus();
+ uv_cpu_to_blade = alloc_bootmem_pages(bytes);
+ memset(uv_cpu_to_blade, 255, bytes);
+
+ last_nasid = -1;
+ blade = -1;
+ lcpu = -1;
+ for_each_possible_cpu(cpu) {
+ nid = cpu_to_node(cpu);
+ nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu));
+ if (nasid != last_nasid) {
+ blade++;
+ lcpu = -1;
+ uv_blade_info[blade].nr_posible_cpus = 0;
+ uv_blade_info[blade].nr_online_cpus = 0;
+ }
+ last_nasid = nasid;
+ lcpu++;
+
+ uv_cpu_hub_info(cpu)->m_val = m_n_config.s.m_skt;
+ uv_cpu_hub_info(cpu)->n_val = m_n_config.s.n_skt;
+ uv_cpu_hub_info(cpu)->numa_blade_id = blade;
+ uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
+ uv_cpu_hub_info(cpu)->local_nasid = nasid;
+ uv_cpu_hub_info(cpu)->gnode_upper =
+ nasid & ~((1 << uv_hub_info->n_val) - 1);
+ uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
+ uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */
+ uv_blade_info[blade].nasid = nasid;
+ uv_blade_info[blade].nr_posible_cpus++;
+ uv_node_to_blade[nid] = blade;
+ uv_cpu_to_blade[cpu] = blade;
+
+ printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, nasid %d, nid %d\n",
+ cpu, per_cpu(x86_cpu_to_apicid, cpu), nasid, nid);
+ printk(KERN_DEBUG "UV lcpu %d, blade %d\n", lcpu, blade);
+ }
+}
+
+/*
+ * Called on each cpu to initialize the per_cpu UV data area.
+ */
+void __cpuinit uv_cpu_init(void)
+{
+ if (!uv_node_to_blade)
+ uv_system_init();
+
+ uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
+
+ if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
+ set_x2apic_extra_bits(uv_hub_info->local_nasid);
+}
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
new file mode 100644
index 0000000..3db0590
--- /dev/null
+++ b/arch/x86/kernel/head32.c
@@ -0,0 +1,14 @@
+/*
+ * linux/arch/i386/kernel/head32.c -- prepare to run common code
+ *
+ * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
+ * Copyright (C) 2007 Eric Biederman <ebiederm@xmission.com>
+ */
+
+#include <linux/init.h>
+#include <linux/start_kernel.h>
+
+void __init i386_start_kernel(void)
+{
+ start_kernel();
+}
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index ad24408..d6d54fa 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -49,39 +49,75 @@
}
}
-#define EBDA_ADDR_POINTER 0x40E
+#define BIOS_EBDA_SEGMENT 0x40E
+#define BIOS_LOWMEM_KILOBYTES 0x413
-static __init void reserve_ebda(void)
+/*
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
+ */
+static void __init reserve_ebda_region(void)
{
- unsigned ebda_addr, ebda_size;
+ unsigned int lowmem, ebda_addr;
- /*
- * there is a real-mode segmented pointer pointing to the
- * 4K EBDA area at 0x40E
- */
- ebda_addr = *(unsigned short *)__va(EBDA_ADDR_POINTER);
- ebda_addr <<= 4;
-
- if (!ebda_addr)
+ /* To determine the position of the EBDA and the */
+ /* end of conventional memory, we need to look at */
+ /* the BIOS data area. In a paravirtual environment */
+ /* that area is absent. We'll just have to assume */
+ /* that the paravirt case can handle memory setup */
+ /* correctly, without our help. */
+ if (paravirt_enabled())
return;
- ebda_size = *(unsigned short *)__va(ebda_addr);
+ /* end of low (conventional) memory */
+ lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+ lowmem <<= 10;
- /* Round EBDA up to pages */
- if (ebda_size == 0)
- ebda_size = 1;
- ebda_size <<= 10;
- ebda_size = round_up(ebda_size + (ebda_addr & ~PAGE_MASK), PAGE_SIZE);
- if (ebda_size > 64*1024)
- ebda_size = 64*1024;
+ /* start of EBDA area */
+ ebda_addr = *(unsigned short *)__va(BIOS_EBDA_SEGMENT);
+ ebda_addr <<= 4;
- reserve_early(ebda_addr, ebda_addr + ebda_size, "EBDA");
+ /* Fixup: bios puts an EBDA in the top 64K segment */
+ /* of conventional memory, but does not adjust lowmem. */
+ if ((lowmem - ebda_addr) <= 0x10000)
+ lowmem = ebda_addr;
+
+ /* Fixup: bios does not report an EBDA at all. */
+ /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+ if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+ lowmem = 0x9f000;
+
+ /* Paranoia: should never happen, but... */
+ if ((lowmem == 0) || (lowmem >= 0x100000))
+ lowmem = 0x9f000;
+
+ /* reserve all memory between lowmem and the 1MB mark */
+ reserve_early(lowmem, 0x100000, "BIOS reserved");
}
void __init x86_64_start_kernel(char * real_mode_data)
{
int i;
+ /*
+ * Build-time sanity checks on the kernel image and module
+ * area mappings. (these are purely build-time and produce no code)
+ */
+ BUILD_BUG_ON(MODULES_VADDR < KERNEL_IMAGE_START);
+ BUILD_BUG_ON(MODULES_VADDR-KERNEL_IMAGE_START < KERNEL_IMAGE_SIZE);
+ BUILD_BUG_ON(MODULES_LEN + KERNEL_IMAGE_SIZE > 2*PUD_SIZE);
+ BUILD_BUG_ON((KERNEL_IMAGE_START & ~PMD_MASK) != 0);
+ BUILD_BUG_ON((MODULES_VADDR & ~PMD_MASK) != 0);
+ BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
+ BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
+ (__START_KERNEL & PGDIR_MASK)));
+
/* clear bss before set_intr_gate with early_idt_handler */
clear_bss();
@@ -91,7 +127,7 @@
/* Cleanup the over mapped high alias */
cleanup_highmap();
- for (i = 0; i < IDT_ENTRIES; i++) {
+ for (i = 0; i < NUM_EXCEPTION_VECTORS; i++) {
#ifdef CONFIG_EARLY_PRINTK
set_intr_gate(i, &early_idt_handlers[i]);
#else
@@ -118,7 +154,7 @@
reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
}
- reserve_ebda();
+ reserve_ebda_region();
/*
* At this point everything still needed from the boot loader
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 74d87ea..826988a 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -450,7 +450,7 @@
jmp initialize_secondary # all other CPUs call initialize_secondary
1:
#endif /* CONFIG_SMP */
- jmp start_kernel
+ jmp i386_start_kernel
/*
* We depend on ET to be correct. This checks for 287/387.
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index a007454..10a1955 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -132,10 +132,6 @@
addq %rbp, trampoline_level4_pgt + 0(%rip)
addq %rbp, trampoline_level4_pgt + (511*8)(%rip)
#endif
-#ifdef CONFIG_ACPI_SLEEP
- addq %rbp, wakeup_level4_pgt + 0(%rip)
- addq %rbp, wakeup_level4_pgt + (511*8)(%rip)
-#endif
/* Due to ENTRY(), sometimes the empty space gets filled with
* zeros. Better take a jmp than relying on empty space being
@@ -267,21 +263,16 @@
bad_address:
jmp bad_address
+ .section ".init.text","ax"
#ifdef CONFIG_EARLY_PRINTK
-.macro early_idt_tramp first, last
- .ifgt \last-\first
- early_idt_tramp \first, \last-1
- .endif
- movl $\last,%esi
- jmp early_idt_handler
-.endm
-
.globl early_idt_handlers
early_idt_handlers:
- early_idt_tramp 0, 63
- early_idt_tramp 64, 127
- early_idt_tramp 128, 191
- early_idt_tramp 192, 255
+ i = 0
+ .rept NUM_EXCEPTION_VECTORS
+ movl $i, %esi
+ jmp early_idt_handler
+ i = i + 1
+ .endr
#endif
ENTRY(early_idt_handler)
@@ -327,6 +318,7 @@
early_idt_ripmsg:
.asciz "RIP %s\n"
#endif /* CONFIG_EARLY_PRINTK */
+ .previous
.balign PAGE_SIZE
@@ -383,12 +375,12 @@
NEXT_PAGE(level2_kernel_pgt)
/*
- * 128 MB kernel mapping. We spend a full page on this pagetable
+ * 512 MB kernel mapping. We spend a full page on this pagetable
* anyway.
*
* The kernel code+data+bss must not be bigger than that.
*
- * (NOTE: at +128MB starts the module area, see MODULES_VADDR.
+ * (NOTE: at +512MB starts the module area, see MODULES_VADDR.
* If you want to increase this then increase MODULES_VADDR
* too.)
*/
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 235fd6c..36652ea 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -133,13 +133,16 @@
#ifdef CONFIG_HPET_EMULATE_RTC
hpet_reserve_timer(&hd, 1);
#endif
+
hd.hd_irq[0] = HPET_LEGACY_8254;
hd.hd_irq[1] = HPET_LEGACY_RTC;
- for (i = 2; i < nrtimers; timer++, i++)
- hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
- Tn_INT_ROUTE_CNF_SHIFT;
+ for (i = 2; i < nrtimers; timer++, i++)
+ hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
+ Tn_INT_ROUTE_CNF_SHIFT;
+
hpet_alloc(&hd);
+
}
#else
static void hpet_reserve_platform_timers(unsigned long id) { }
diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c
index 0616278..deb4378 100644
--- a/arch/x86/kernel/i386_ksyms_32.c
+++ b/arch/x86/kernel/i386_ksyms_32.c
@@ -1,13 +1,8 @@
#include <linux/module.h>
-#include <asm/semaphore.h>
#include <asm/checksum.h>
#include <asm/desc.h>
#include <asm/pgtable.h>
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
/* Networking helper routines. */
EXPORT_SYMBOL(csum_partial_copy_generic);
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index d2e39e6..8f8102d 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -5,45 +5,41 @@
* General FPU state handling cleanups
* Gareth Hughes <gareth@valinux.com>, May 2000
*/
-
-#include <linux/sched.h>
#include <linux/module.h>
#include <linux/regset.h>
-#include <asm/processor.h>
-#include <asm/i387.h>
-#include <asm/math_emu.h>
+#include <linux/sched.h>
+
#include <asm/sigcontext.h>
-#include <asm/user.h>
-#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/math_emu.h>
#include <asm/uaccess.h>
+#include <asm/ptrace.h>
+#include <asm/i387.h>
+#include <asm/user.h>
#ifdef CONFIG_X86_64
-
-#include <asm/sigcontext32.h>
-#include <asm/user32.h>
-
+# include <asm/sigcontext32.h>
+# include <asm/user32.h>
#else
-
-#define save_i387_ia32 save_i387
-#define restore_i387_ia32 restore_i387
-
-#define _fpstate_ia32 _fpstate
-#define user_i387_ia32_struct user_i387_struct
-#define user32_fxsr_struct user_fxsr_struct
-
+# define save_i387_ia32 save_i387
+# define restore_i387_ia32 restore_i387
+# define _fpstate_ia32 _fpstate
+# define user_i387_ia32_struct user_i387_struct
+# define user32_fxsr_struct user_fxsr_struct
#endif
#ifdef CONFIG_MATH_EMULATION
-#define HAVE_HWFP (boot_cpu_data.hard_math)
+# define HAVE_HWFP (boot_cpu_data.hard_math)
#else
-#define HAVE_HWFP 1
+# define HAVE_HWFP 1
#endif
-static unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
+static unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
void mxcsr_feature_mask_init(void)
{
unsigned long mask = 0;
+
clts();
if (cpu_has_fxsr) {
memset(¤t->thread.i387.fxsave, 0,
@@ -69,10 +65,11 @@
if (offsetof(struct task_struct, thread.i387.fxsave) & 15)
__bad_fxsave_alignment();
+
set_in_cr4(X86_CR4_OSFXSR);
set_in_cr4(X86_CR4_OSXMMEXCPT);
- write_cr0(oldcr0 & ~((1UL<<3)|(1UL<<2))); /* clear TS and EM */
+ write_cr0(oldcr0 & ~(X86_CR0_TS|X86_CR0_EM)); /* clear TS and EM */
mxcsr_feature_mask_init();
/* clean state in init */
@@ -178,6 +175,7 @@
tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
+
return tmp;
}
@@ -232,8 +230,8 @@
* FXSR floating point environment conversions.
*/
-static void convert_from_fxsr(struct user_i387_ia32_struct *env,
- struct task_struct *tsk)
+static void
+convert_from_fxsr(struct user_i387_ia32_struct *env, struct task_struct *tsk)
{
struct i387_fxsave_struct *fxsave = &tsk->thread.i387.fxsave;
struct _fpreg *to = (struct _fpreg *) &env->st_space[0];
@@ -252,10 +250,11 @@
* should be actually ds/cs at fpu exception time, but
* that information is not available in 64bit mode.
*/
- asm("mov %%ds,%0" : "=r" (env->fos));
- asm("mov %%cs,%0" : "=r" (env->fcs));
+ asm("mov %%ds, %[fos]" : [fos] "=r" (env->fos));
+ asm("mov %%cs, %[fcs]" : [fcs] "=r" (env->fcs));
} else {
struct pt_regs *regs = task_pt_regs(tsk);
+
env->fos = 0xffff0000 | tsk->thread.ds;
env->fcs = regs->cs;
}
@@ -309,9 +308,10 @@
init_fpu(target);
- if (!cpu_has_fxsr)
+ if (!cpu_has_fxsr) {
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.i387.fsave, 0, -1);
+ }
if (kbuf && pos == 0 && count == sizeof(env)) {
convert_from_fxsr(kbuf, target);
@@ -319,6 +319,7 @@
}
convert_from_fxsr(&env, target);
+
return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &env, 0, -1);
}
@@ -335,9 +336,10 @@
init_fpu(target);
set_stopped_child_used_math(target);
- if (!cpu_has_fxsr)
+ if (!cpu_has_fxsr) {
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.i387.fsave, 0, -1);
+ }
if (pos > 0 || count < sizeof(env))
convert_from_fxsr(&env, target);
@@ -392,28 +394,28 @@
{
if (!used_math())
return 0;
-
- /* This will cause a "finit" to be triggered by the next
+ /*
+ * This will cause a "finit" to be triggered by the next
* attempted FPU operation by the 'current' process.
*/
clear_used_math();
- if (HAVE_HWFP) {
- if (cpu_has_fxsr) {
- return save_i387_fxsave(buf);
- } else {
- return save_i387_fsave(buf);
- }
- } else {
+ if (!HAVE_HWFP) {
return fpregs_soft_get(current, NULL,
0, sizeof(struct user_i387_ia32_struct),
NULL, buf) ? -1 : 1;
}
+
+ if (cpu_has_fxsr)
+ return save_i387_fxsave(buf);
+ else
+ return save_i387_fsave(buf);
}
static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf)
{
struct task_struct *tsk = current;
+
clear_fpu(tsk);
return __copy_from_user(&tsk->thread.i387.fsave, buf,
sizeof(struct i387_fsave_struct));
@@ -421,9 +423,10 @@
static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf)
{
- int err;
struct task_struct *tsk = current;
struct user_i387_ia32_struct env;
+ int err;
+
clear_fpu(tsk);
err = __copy_from_user(&tsk->thread.i387.fxsave, &buf->_fxsr_env[0],
sizeof(struct i387_fxsave_struct));
@@ -432,6 +435,7 @@
if (err || __copy_from_user(&env, buf, sizeof(env)))
return 1;
convert_to_fxsr(tsk, &env);
+
return 0;
}
@@ -440,17 +444,17 @@
int err;
if (HAVE_HWFP) {
- if (cpu_has_fxsr) {
+ if (cpu_has_fxsr)
err = restore_i387_fxsave(buf);
- } else {
+ else
err = restore_i387_fsave(buf);
- }
} else {
err = fpregs_soft_set(current, NULL,
0, sizeof(struct user_i387_ia32_struct),
NULL, buf) != 0;
}
set_used_math();
+
return err;
}
@@ -463,8 +467,8 @@
*/
int dump_fpu(struct pt_regs *regs, struct user_i387_struct *fpu)
{
- int fpvalid;
struct task_struct *tsk = current;
+ int fpvalid;
fpvalid = !!used_math();
if (fpvalid)
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 4ca5486..2e2f420 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -71,6 +71,16 @@
*/
int nr_ioapic_registers[MAX_IO_APICS];
+/* I/O APIC entries */
+struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+int nr_ioapics;
+
+/* MP IRQ source entries */
+struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* # of MP IRQ source entries */
+int mp_irq_entries;
+
static int disable_timer_pin_1 __initdata;
/*
@@ -810,10 +820,7 @@
for (i = 0; i < mp_irq_entries; i++) {
int lbus = mp_irqs[i].mpc_srcbus;
- if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_MCA
- ) &&
+ if (test_bit(lbus, mp_bus_not_pci) &&
(mp_irqs[i].mpc_irqtype == type) &&
(mp_irqs[i].mpc_srcbusirq == irq))
@@ -829,10 +836,7 @@
for (i = 0; i < mp_irq_entries; i++) {
int lbus = mp_irqs[i].mpc_srcbus;
- if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
- mp_bus_id_to_type[lbus] == MP_BUS_MCA
- ) &&
+ if (test_bit(lbus, mp_bus_not_pci) &&
(mp_irqs[i].mpc_irqtype == type) &&
(mp_irqs[i].mpc_srcbusirq == irq))
break;
@@ -872,7 +876,7 @@
mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
break;
- if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) &&
+ if (!test_bit(lbus, mp_bus_not_pci) &&
!mp_irqs[i].mpc_irqtype &&
(bus == lbus) &&
(slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
@@ -921,6 +925,7 @@
}
#endif
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
/*
* EISA Edge/Level control register, ELCR
*/
@@ -934,6 +939,13 @@
"Broken MPtable reports ISA irq %d\n", irq);
return 0;
}
+#endif
+
+/* ISA interrupts are always polarity zero edge triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_ISA_trigger(idx) (0)
+#define default_ISA_polarity(idx) (0)
/* EISA interrupts are always polarity zero and can be edge or level
* trigger depending on the ELCR value. If an interrupt is listed as
@@ -941,13 +953,7 @@
* be read in from the ELCR */
#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
-#define default_EISA_polarity(idx) (0)
-
-/* ISA interrupts are always polarity zero edge triggered,
- * when listed as conforming in the MP table. */
-
-#define default_ISA_trigger(idx) (0)
-#define default_ISA_polarity(idx) (0)
+#define default_EISA_polarity(idx) default_ISA_polarity(idx)
/* PCI interrupts are always polarity one level triggered,
* when listed as conforming in the MP table. */
@@ -959,7 +965,7 @@
* when listed as conforming in the MP table. */
#define default_MCA_trigger(idx) (1)
-#define default_MCA_polarity(idx) (0)
+#define default_MCA_polarity(idx) default_ISA_polarity(idx)
static int MPBIOS_polarity(int idx)
{
@@ -973,35 +979,9 @@
{
case 0: /* conforms, ie. bus-type dependent polarity */
{
- switch (mp_bus_id_to_type[bus])
- {
- case MP_BUS_ISA: /* ISA pin */
- {
- polarity = default_ISA_polarity(idx);
- break;
- }
- case MP_BUS_EISA: /* EISA pin */
- {
- polarity = default_EISA_polarity(idx);
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- polarity = default_PCI_polarity(idx);
- break;
- }
- case MP_BUS_MCA: /* MCA pin */
- {
- polarity = default_MCA_polarity(idx);
- break;
- }
- default:
- {
- printk(KERN_WARNING "broken BIOS!!\n");
- polarity = 1;
- break;
- }
- }
+ polarity = test_bit(bus, mp_bus_not_pci)?
+ default_ISA_polarity(idx):
+ default_PCI_polarity(idx);
break;
}
case 1: /* high active */
@@ -1042,11 +1022,15 @@
{
case 0: /* conforms, ie. bus-type dependent */
{
+ trigger = test_bit(bus, mp_bus_not_pci)?
+ default_ISA_trigger(idx):
+ default_PCI_trigger(idx);
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
switch (mp_bus_id_to_type[bus])
{
case MP_BUS_ISA: /* ISA pin */
{
- trigger = default_ISA_trigger(idx);
+ /* set before the switch */
break;
}
case MP_BUS_EISA: /* EISA pin */
@@ -1056,7 +1040,7 @@
}
case MP_BUS_PCI: /* PCI pin */
{
- trigger = default_PCI_trigger(idx);
+ /* set before the switch */
break;
}
case MP_BUS_MCA: /* MCA pin */
@@ -1071,6 +1055,7 @@
break;
}
}
+#endif
break;
}
case 1: /* edge */
@@ -1120,39 +1105,22 @@
if (mp_irqs[idx].mpc_dstirq != pin)
printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
- switch (mp_bus_id_to_type[bus])
- {
- case MP_BUS_ISA: /* ISA pin */
- case MP_BUS_EISA:
- case MP_BUS_MCA:
- {
- irq = mp_irqs[idx].mpc_srcbusirq;
- break;
- }
- case MP_BUS_PCI: /* PCI pin */
- {
- /*
- * PCI IRQs are mapped in order
- */
- i = irq = 0;
- while (i < apic)
- irq += nr_ioapic_registers[i++];
- irq += pin;
+ if (test_bit(bus, mp_bus_not_pci))
+ irq = mp_irqs[idx].mpc_srcbusirq;
+ else {
+ /*
+ * PCI IRQs are mapped in order
+ */
+ i = irq = 0;
+ while (i < apic)
+ irq += nr_ioapic_registers[i++];
+ irq += pin;
- /*
- * For MPS mode, so far only needed by ES7000 platform
- */
- if (ioapic_renumber_irq)
- irq = ioapic_renumber_irq(apic, irq);
-
- break;
- }
- default:
- {
- printk(KERN_ERR "unknown bus type %d.\n",bus);
- irq = 0;
- break;
- }
+ /*
+ * For MPS mode, so far only needed by ES7000 platform
+ */
+ if (ioapic_renumber_irq)
+ irq = ioapic_renumber_irq(apic, irq);
}
/*
@@ -1260,7 +1228,6 @@
{
struct IO_APIC_route_entry entry;
int apic, pin, idx, irq, first_notcon = 1, vector;
- unsigned long flags;
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
@@ -1326,9 +1293,7 @@
if (!apic && (irq < 16))
disable_8259A_irq(irq);
}
- spin_lock_irqsave(&ioapic_lock, flags);
- __ioapic_write_entry(apic, pin, entry);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(apic, pin, entry);
}
}
@@ -1524,8 +1489,8 @@
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
- v = apic_read(APIC_ID);
- printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v));
+ printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v,
+ GET_APIC_ID(read_apic_id()));
v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
ver = GET_APIC_VERSION(v);
@@ -1734,7 +1699,7 @@
entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
entry.dest.physical.physical_dest =
- GET_APIC_ID(apic_read(APIC_ID));
+ GET_APIC_ID(read_apic_id());
/*
* Add it to the IO-APIC irq-routing table:
@@ -2031,8 +1996,7 @@
* 0x80, because int 0x80 is hm, kind of importantish. ;)
*/
for (irq = 0; irq < NR_IRQS ; irq++) {
- int tmp = irq;
- if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) {
+ if (IO_APIC_IRQ(irq) && !irq_vector[irq]) {
/*
* Hmm.. We don't have an entry for this,
* so default to an old-fashioned 8259
@@ -2156,8 +2120,6 @@
ioapic_write_entry(apic, pin, entry0);
}
-int timer_uses_ioapic_pin_0;
-
/*
* This code may look a bit paranoid, but it's supposed to cooperate with
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
@@ -2168,10 +2130,14 @@
{
int apic1, pin1, apic2, pin2;
int vector;
+ unsigned int ver;
unsigned long flags;
local_irq_save(flags);
+ ver = apic_read(APIC_LVR);
+ ver = GET_APIC_VERSION(ver);
+
/*
* get/set the timer IRQ vector:
*/
@@ -2184,11 +2150,15 @@
* mode for the 8259A whenever interrupts are routed
* through I/O APICs. Also IRQ0 has to be enabled in
* the 8259A which implies the virtual wire has to be
- * disabled in the local APIC.
+ * disabled in the local APIC. Finally timer interrupts
+ * need to be acknowledged manually in the 8259A for
+ * timer_interrupt() and for the i82489DX when using
+ * the NMI watchdog.
*/
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- timer_ack = 1;
+ timer_ack = !cpu_has_tsc;
+ timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
if (timer_over_8254 > 0)
enable_8259A_irq(0);
@@ -2197,9 +2167,6 @@
pin2 = ioapic_i8259.pin;
apic2 = ioapic_i8259.apic;
- if (pin1 == 0)
- timer_uses_ioapic_pin_0 = 1;
-
printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
vector, apic1, pin1, apic2, pin2);
@@ -2789,7 +2756,6 @@
int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
{
struct IO_APIC_route_entry entry;
- unsigned long flags;
if (!IO_APIC_IRQ(irq)) {
printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
@@ -2830,9 +2796,7 @@
if (!ioapic && (irq < 16))
disable_8259A_irq(irq);
- spin_lock_irqsave(&ioapic_lock, flags);
- __ioapic_write_entry(ioapic, pin, entry);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(ioapic, pin, entry);
return 0;
}
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index 1627c0d..b54464b 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -43,13 +43,15 @@
#include <asm/smp.h>
#include <asm/desc.h>
#include <asm/proto.h>
-#include <asm/mach_apic.h>
#include <asm/acpi.h>
#include <asm/dma.h>
#include <asm/nmi.h>
#include <asm/msidef.h>
#include <asm/hypertransport.h>
+#include <mach_ipi.h>
+#include <mach_apic.h>
+
struct irq_cfg {
cpumask_t domain;
cpumask_t old_domain;
@@ -101,6 +103,16 @@
*/
int nr_ioapic_registers[MAX_IO_APICS];
+/* I/O APIC entries */
+struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+int nr_ioapics;
+
+/* MP IRQ source entries */
+struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* # of MP IRQ source entries */
+int mp_irq_entries;
+
/*
* Rough estimation of how many shared IRQs there are, can
* be changed anytime.
@@ -155,11 +167,10 @@
writel(value, &io_apic->data);
}
-static int io_apic_level_ack_pending(unsigned int irq)
+static bool io_apic_level_ack_pending(unsigned int irq)
{
struct irq_pin_list *entry;
unsigned long flags;
- int pending = 0;
spin_lock_irqsave(&ioapic_lock, flags);
entry = irq_2_pin + irq;
@@ -172,13 +183,17 @@
break;
reg = io_apic_read(entry->apic, 0x10 + pin*2);
/* Is the remote IRR bit set? */
- pending |= (reg >> 14) & 1;
+ if ((reg >> 14) & 1) {
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ return true;
+ }
if (!entry->next)
break;
entry = irq_2_pin + entry->next;
}
spin_unlock_irqrestore(&ioapic_lock, flags);
- return pending;
+
+ return false;
}
/*
@@ -902,9 +917,8 @@
static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
{
struct IO_APIC_route_entry entry;
- unsigned long flags;
- memset(&entry,0,sizeof(entry));
+ memset(&entry, 0, sizeof(entry));
disable_8259A_irq(0);
@@ -932,10 +946,7 @@
/*
* Add it to the IO-APIC irq-routing table:
*/
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
- io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(apic, pin, entry);
enable_8259A_irq(0);
}
@@ -1066,8 +1077,7 @@
printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
smp_processor_id(), hard_smp_processor_id());
- v = apic_read(APIC_ID);
- printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v));
+ printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
v = apic_read(APIC_LVR);
printk(KERN_INFO "... APIC VERSION: %08x\n", v);
ver = GET_APIC_VERSION(v);
@@ -1261,7 +1271,7 @@
entry.dest_mode = 0; /* Physical */
entry.delivery_mode = dest_ExtINT; /* ExtInt */
entry.vector = 0;
- entry.dest = GET_APIC_ID(apic_read(APIC_ID));
+ entry.dest = GET_APIC_ID(read_apic_id());
/*
* Add it to the IO-APIC irq-routing table:
@@ -1352,9 +1362,7 @@
unsigned long flags;
spin_lock_irqsave(&vector_lock, flags);
- cpus_clear(mask);
- cpu_set(first_cpu(cfg->domain), mask);
-
+ mask = cpumask_of_cpu(first_cpu(cfg->domain));
send_IPI_mask(mask, cfg->vector);
spin_unlock_irqrestore(&vector_lock, flags);
@@ -1517,8 +1525,7 @@
* 0x80, because int 0x80 is hm, kind of importantish. ;)
*/
for (irq = 0; irq < NR_IRQS ; irq++) {
- int tmp = irq;
- if (IO_APIC_IRQ(tmp) && !irq_cfg[tmp].vector) {
+ if (IO_APIC_IRQ(irq) && !irq_cfg[irq].vector) {
/*
* Hmm.. We don't have an entry for this,
* so default to an old-fashioned 8259
@@ -1597,17 +1604,14 @@
int apic, pin, i;
struct IO_APIC_route_entry entry0, entry1;
unsigned char save_control, save_freq_select;
- unsigned long flags;
pin = find_isa_irq_pin(8, mp_INT);
apic = find_isa_irq_apic(8, mp_INT);
if (pin == -1)
return;
- spin_lock_irqsave(&ioapic_lock, flags);
- *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
- *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ entry0 = ioapic_read_entry(apic, pin);
+
clear_IO_APIC_pin(apic, pin);
memset(&entry1, 0, sizeof(entry1));
@@ -1620,10 +1624,7 @@
entry1.trigger = 0;
entry1.vector = 0;
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
- io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(apic, pin, entry1);
save_control = CMOS_READ(RTC_CONTROL);
save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
@@ -1642,10 +1643,7 @@
CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
clear_IO_APIC_pin(apic, pin);
- spin_lock_irqsave(&ioapic_lock, flags);
- io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
- io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
- spin_unlock_irqrestore(&ioapic_lock, flags);
+ ioapic_write_entry(apic, pin, entry0);
}
/*
@@ -2314,7 +2312,6 @@
res = (void *)mem;
if (mem != NULL) {
- memset(mem, 0, n);
mem += sizeof(struct resource) * nr_ioapics;
for (i = 0; i < nr_ioapics; i++) {
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
new file mode 100644
index 0000000..c0df7b8
--- /dev/null
+++ b/arch/x86/kernel/ipi.c
@@ -0,0 +1,178 @@
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/apic.h>
+#include <asm/proto.h>
+
+#ifdef CONFIG_X86_32
+#include <mach_apic.h>
+/*
+ * the following functions deal with sending IPIs between CPUs.
+ *
+ * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
+ */
+
+static inline int __prepare_ICR(unsigned int shortcut, int vector)
+{
+ unsigned int icr = shortcut | APIC_DEST_LOGICAL;
+
+ switch (vector) {
+ default:
+ icr |= APIC_DM_FIXED | vector;
+ break;
+ case NMI_VECTOR:
+ icr |= APIC_DM_NMI;
+ break;
+ }
+ return icr;
+}
+
+static inline int __prepare_ICR2(unsigned int mask)
+{
+ return SET_APIC_DEST_FIELD(mask);
+}
+
+void __send_IPI_shortcut(unsigned int shortcut, int vector)
+{
+ /*
+ * Subtle. In the case of the 'never do double writes' workaround
+ * we have to lock out interrupts to be safe. As we don't care
+ * of the value read we use an atomic rmw access to avoid costly
+ * cli/sti. Otherwise we use an even cheaper single atomic write
+ * to the APIC.
+ */
+ unsigned int cfg;
+
+ /*
+ * Wait for idle.
+ */
+ apic_wait_icr_idle();
+
+ /*
+ * No need to touch the target chip field
+ */
+ cfg = __prepare_ICR(shortcut, vector);
+
+ /*
+ * Send the IPI. The write to APIC_ICR fires this off.
+ */
+ apic_write_around(APIC_ICR, cfg);
+}
+
+void send_IPI_self(int vector)
+{
+ __send_IPI_shortcut(APIC_DEST_SELF, vector);
+}
+
+/*
+ * This is used to send an IPI with no shorthand notation (the destination is
+ * specified in bits 56 to 63 of the ICR).
+ */
+static inline void __send_IPI_dest_field(unsigned long mask, int vector)
+{
+ unsigned long cfg;
+
+ /*
+ * Wait for idle.
+ */
+ if (unlikely(vector == NMI_VECTOR))
+ safe_apic_wait_icr_idle();
+ else
+ apic_wait_icr_idle();
+
+ /*
+ * prepare target chip field
+ */
+ cfg = __prepare_ICR2(mask);
+ apic_write_around(APIC_ICR2, cfg);
+
+ /*
+ * program the ICR
+ */
+ cfg = __prepare_ICR(0, vector);
+
+ /*
+ * Send the IPI. The write to APIC_ICR fires this off.
+ */
+ apic_write_around(APIC_ICR, cfg);
+}
+
+/*
+ * This is only used on smaller machines.
+ */
+void send_IPI_mask_bitmask(cpumask_t cpumask, int vector)
+{
+ unsigned long mask = cpus_addr(cpumask)[0];
+ unsigned long flags;
+
+ local_irq_save(flags);
+ WARN_ON(mask & ~cpus_addr(cpu_online_map)[0]);
+ __send_IPI_dest_field(mask, vector);
+ local_irq_restore(flags);
+}
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector)
+{
+ unsigned long flags;
+ unsigned int query_cpu;
+
+ /*
+ * Hack. The clustered APIC addressing mode doesn't allow us to send
+ * to an arbitrary mask, so I do a unicasts to each CPU instead. This
+ * should be modified to do 1 message per cluster ID - mbligh
+ */
+
+ local_irq_save(flags);
+ for_each_possible_cpu(query_cpu) {
+ if (cpu_isset(query_cpu, mask)) {
+ __send_IPI_dest_field(cpu_to_logical_apicid(query_cpu),
+ vector);
+ }
+ }
+ local_irq_restore(flags);
+}
+
+/* must come after the send_IPI functions above for inlining */
+#include <mach_ipi.h>
+static int convert_apicid_to_cpu(int apic_id)
+{
+ int i;
+
+ for_each_possible_cpu(i) {
+ if (per_cpu(x86_cpu_to_apicid, i) == apic_id)
+ return i;
+ }
+ return -1;
+}
+
+int safe_smp_processor_id(void)
+{
+ int apicid, cpuid;
+
+ if (!boot_cpu_has(X86_FEATURE_APIC))
+ return 0;
+
+ apicid = hard_smp_processor_id();
+ if (apicid == BAD_APICID)
+ return 0;
+
+ cpuid = convert_apicid_to_cpu(apicid);
+
+ return cpuid >= 0 ? cpuid : 0;
+}
+#endif
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index cef054b..6ea67b7 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -79,7 +79,7 @@
if (unlikely((unsigned)irq >= NR_IRQS)) {
printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
- __FUNCTION__, irq);
+ __func__, irq);
BUG();
}
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
new file mode 100644
index 0000000..24362ec
--- /dev/null
+++ b/arch/x86/kernel/kgdb.c
@@ -0,0 +1,571 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+/*
+ * Copyright (C) 2004 Amit S. Kale <amitkale@linsyssoft.com>
+ * Copyright (C) 2000-2001 VERITAS Software Corporation.
+ * Copyright (C) 2002 Andi Kleen, SuSE Labs
+ * Copyright (C) 2004 LinSysSoft Technologies Pvt. Ltd.
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Copyright (C) 2007-2008 Jason Wessel, Wind River Systems, Inc.
+ */
+/****************************************************************************
+ * Contributor: Lake Stevens Instrument Division$
+ * Written by: Glenn Engel $
+ * Updated by: Amit Kale<akale@veritas.com>
+ * Updated by: Tom Rini <trini@kernel.crashing.org>
+ * Updated by: Jason Wessel <jason.wessel@windriver.com>
+ * Modified for 386 by Jim Kingdon, Cygnus Support.
+ * Origianl kgdb, compatibility with 2.1.xx kernel by
+ * David Grothe <dave@gcom.com>
+ * Integrated into 2.2.5 kernel by Tigran Aivazian <tigran@sco.com>
+ * X86_64 changes from Andi Kleen's patch merged by Jim Houston
+ */
+#include <linux/spinlock.h>
+#include <linux/kdebug.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/kgdb.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/nmi.h>
+
+#include <asm/apicdef.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_X86_32
+# include <mach_ipi.h>
+#else
+# include <asm/mach_apic.h>
+#endif
+
+/*
+ * Put the error code here just in case the user cares:
+ */
+static int gdb_x86errcode;
+
+/*
+ * Likewise, the vector number here (since GDB only gets the signal
+ * number through the usual means, and that's not very specific):
+ */
+static int gdb_x86vector = -1;
+
+/**
+ * pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs
+ * @gdb_regs: A pointer to hold the registers in the order GDB wants.
+ * @regs: The &struct pt_regs of the current process.
+ *
+ * Convert the pt_regs in @regs into the format for registers that
+ * GDB expects, stored in @gdb_regs.
+ */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ gdb_regs[GDB_AX] = regs->ax;
+ gdb_regs[GDB_BX] = regs->bx;
+ gdb_regs[GDB_CX] = regs->cx;
+ gdb_regs[GDB_DX] = regs->dx;
+ gdb_regs[GDB_SI] = regs->si;
+ gdb_regs[GDB_DI] = regs->di;
+ gdb_regs[GDB_BP] = regs->bp;
+ gdb_regs[GDB_PS] = regs->flags;
+ gdb_regs[GDB_PC] = regs->ip;
+#ifdef CONFIG_X86_32
+ gdb_regs[GDB_DS] = regs->ds;
+ gdb_regs[GDB_ES] = regs->es;
+ gdb_regs[GDB_CS] = regs->cs;
+ gdb_regs[GDB_SS] = __KERNEL_DS;
+ gdb_regs[GDB_FS] = 0xFFFF;
+ gdb_regs[GDB_GS] = 0xFFFF;
+#else
+ gdb_regs[GDB_R8] = regs->r8;
+ gdb_regs[GDB_R9] = regs->r9;
+ gdb_regs[GDB_R10] = regs->r10;
+ gdb_regs[GDB_R11] = regs->r11;
+ gdb_regs[GDB_R12] = regs->r12;
+ gdb_regs[GDB_R13] = regs->r13;
+ gdb_regs[GDB_R14] = regs->r14;
+ gdb_regs[GDB_R15] = regs->r15;
+#endif
+ gdb_regs[GDB_SP] = regs->sp;
+}
+
+/**
+ * sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs
+ * @gdb_regs: A pointer to hold the registers in the order GDB wants.
+ * @p: The &struct task_struct of the desired process.
+ *
+ * Convert the register values of the sleeping process in @p to
+ * the format that GDB expects.
+ * This function is called when kgdb does not have access to the
+ * &struct pt_regs and therefore it should fill the gdb registers
+ * @gdb_regs with what has been saved in &struct thread_struct
+ * thread field during switch_to.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+ gdb_regs[GDB_AX] = 0;
+ gdb_regs[GDB_BX] = 0;
+ gdb_regs[GDB_CX] = 0;
+ gdb_regs[GDB_DX] = 0;
+ gdb_regs[GDB_SI] = 0;
+ gdb_regs[GDB_DI] = 0;
+ gdb_regs[GDB_BP] = *(unsigned long *)p->thread.sp;
+#ifdef CONFIG_X86_32
+ gdb_regs[GDB_DS] = __KERNEL_DS;
+ gdb_regs[GDB_ES] = __KERNEL_DS;
+ gdb_regs[GDB_PS] = 0;
+ gdb_regs[GDB_CS] = __KERNEL_CS;
+ gdb_regs[GDB_PC] = p->thread.ip;
+ gdb_regs[GDB_SS] = __KERNEL_DS;
+ gdb_regs[GDB_FS] = 0xFFFF;
+ gdb_regs[GDB_GS] = 0xFFFF;
+#else
+ gdb_regs[GDB_PS] = *(unsigned long *)(p->thread.sp + 8);
+ gdb_regs[GDB_PC] = 0;
+ gdb_regs[GDB_R8] = 0;
+ gdb_regs[GDB_R9] = 0;
+ gdb_regs[GDB_R10] = 0;
+ gdb_regs[GDB_R11] = 0;
+ gdb_regs[GDB_R12] = 0;
+ gdb_regs[GDB_R13] = 0;
+ gdb_regs[GDB_R14] = 0;
+ gdb_regs[GDB_R15] = 0;
+#endif
+ gdb_regs[GDB_SP] = p->thread.sp;
+}
+
+/**
+ * gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs.
+ * @gdb_regs: A pointer to hold the registers we've received from GDB.
+ * @regs: A pointer to a &struct pt_regs to hold these values in.
+ *
+ * Convert the GDB regs in @gdb_regs into the pt_regs, and store them
+ * in @regs.
+ */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ regs->ax = gdb_regs[GDB_AX];
+ regs->bx = gdb_regs[GDB_BX];
+ regs->cx = gdb_regs[GDB_CX];
+ regs->dx = gdb_regs[GDB_DX];
+ regs->si = gdb_regs[GDB_SI];
+ regs->di = gdb_regs[GDB_DI];
+ regs->bp = gdb_regs[GDB_BP];
+ regs->flags = gdb_regs[GDB_PS];
+ regs->ip = gdb_regs[GDB_PC];
+#ifdef CONFIG_X86_32
+ regs->ds = gdb_regs[GDB_DS];
+ regs->es = gdb_regs[GDB_ES];
+ regs->cs = gdb_regs[GDB_CS];
+#else
+ regs->r8 = gdb_regs[GDB_R8];
+ regs->r9 = gdb_regs[GDB_R9];
+ regs->r10 = gdb_regs[GDB_R10];
+ regs->r11 = gdb_regs[GDB_R11];
+ regs->r12 = gdb_regs[GDB_R12];
+ regs->r13 = gdb_regs[GDB_R13];
+ regs->r14 = gdb_regs[GDB_R14];
+ regs->r15 = gdb_regs[GDB_R15];
+#endif
+}
+
+static struct hw_breakpoint {
+ unsigned enabled;
+ unsigned type;
+ unsigned len;
+ unsigned long addr;
+} breakinfo[4];
+
+static void kgdb_correct_hw_break(void)
+{
+ unsigned long dr7;
+ int correctit = 0;
+ int breakbit;
+ int breakno;
+
+ get_debugreg(dr7, 7);
+ for (breakno = 0; breakno < 4; breakno++) {
+ breakbit = 2 << (breakno << 1);
+ if (!(dr7 & breakbit) && breakinfo[breakno].enabled) {
+ correctit = 1;
+ dr7 |= breakbit;
+ dr7 &= ~(0xf0000 << (breakno << 2));
+ dr7 |= ((breakinfo[breakno].len << 2) |
+ breakinfo[breakno].type) <<
+ ((breakno << 2) + 16);
+ if (breakno >= 0 && breakno <= 3)
+ set_debugreg(breakinfo[breakno].addr, breakno);
+
+ } else {
+ if ((dr7 & breakbit) && !breakinfo[breakno].enabled) {
+ correctit = 1;
+ dr7 &= ~breakbit;
+ dr7 &= ~(0xf0000 << (breakno << 2));
+ }
+ }
+ }
+ if (correctit)
+ set_debugreg(dr7, 7);
+}
+
+static int
+kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
+{
+ int i;
+
+ for (i = 0; i < 4; i++)
+ if (breakinfo[i].addr == addr && breakinfo[i].enabled)
+ break;
+ if (i == 4)
+ return -1;
+
+ breakinfo[i].enabled = 0;
+
+ return 0;
+}
+
+static void kgdb_remove_all_hw_break(void)
+{
+ int i;
+
+ for (i = 0; i < 4; i++)
+ memset(&breakinfo[i], 0, sizeof(struct hw_breakpoint));
+}
+
+static int
+kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
+{
+ unsigned type;
+ int i;
+
+ for (i = 0; i < 4; i++)
+ if (!breakinfo[i].enabled)
+ break;
+ if (i == 4)
+ return -1;
+
+ switch (bptype) {
+ case BP_HARDWARE_BREAKPOINT:
+ type = 0;
+ len = 1;
+ break;
+ case BP_WRITE_WATCHPOINT:
+ type = 1;
+ break;
+ case BP_ACCESS_WATCHPOINT:
+ type = 3;
+ break;
+ default:
+ return -1;
+ }
+
+ if (len == 1 || len == 2 || len == 4)
+ breakinfo[i].len = len - 1;
+ else
+ return -1;
+
+ breakinfo[i].enabled = 1;
+ breakinfo[i].addr = addr;
+ breakinfo[i].type = type;
+
+ return 0;
+}
+
+/**
+ * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb.
+ * @regs: Current &struct pt_regs.
+ *
+ * This function will be called if the particular architecture must
+ * disable hardware debugging while it is processing gdb packets or
+ * handling exception.
+ */
+void kgdb_disable_hw_debug(struct pt_regs *regs)
+{
+ /* Disable hardware debugging while we are in kgdb: */
+ set_debugreg(0UL, 7);
+}
+
+/**
+ * kgdb_post_primary_code - Save error vector/code numbers.
+ * @regs: Original pt_regs.
+ * @e_vector: Original error vector.
+ * @err_code: Original error code.
+ *
+ * This is needed on architectures which support SMP and KGDB.
+ * This function is called after all the slave cpus have been put
+ * to a know spin state and the primary CPU has control over KGDB.
+ */
+void kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code)
+{
+ /* primary processor is completely in the debugger */
+ gdb_x86vector = e_vector;
+ gdb_x86errcode = err_code;
+}
+
+#ifdef CONFIG_SMP
+/**
+ * kgdb_roundup_cpus - Get other CPUs into a holding pattern
+ * @flags: Current IRQ state
+ *
+ * On SMP systems, we need to get the attention of the other CPUs
+ * and get them be in a known state. This should do what is needed
+ * to get the other CPUs to call kgdb_wait(). Note that on some arches,
+ * the NMI approach is not used for rounding up all the CPUs. For example,
+ * in case of MIPS, smp_call_function() is used to roundup CPUs. In
+ * this case, we have to make sure that interrupts are enabled before
+ * calling smp_call_function(). The argument to this function is
+ * the flags that will be used when restoring the interrupts. There is
+ * local_irq_save() call before kgdb_roundup_cpus().
+ *
+ * On non-SMP systems, this is not called.
+ */
+void kgdb_roundup_cpus(unsigned long flags)
+{
+ send_IPI_allbutself(APIC_DM_NMI);
+}
+#endif
+
+/**
+ * kgdb_arch_handle_exception - Handle architecture specific GDB packets.
+ * @vector: The error vector of the exception that happened.
+ * @signo: The signal number of the exception that happened.
+ * @err_code: The error code of the exception that happened.
+ * @remcom_in_buffer: The buffer of the packet we have read.
+ * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
+ * @regs: The &struct pt_regs of the current process.
+ *
+ * This function MUST handle the 'c' and 's' command packets,
+ * as well packets to set / remove a hardware breakpoint, if used.
+ * If there are additional packets which the hardware needs to handle,
+ * they are handled here. The code should return -1 if it wants to
+ * process more packets, and a %0 or %1 if it wants to exit from the
+ * kgdb callback.
+ */
+int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
+ char *remcomInBuffer, char *remcomOutBuffer,
+ struct pt_regs *linux_regs)
+{
+ unsigned long addr;
+ unsigned long dr6;
+ char *ptr;
+ int newPC;
+
+ switch (remcomInBuffer[0]) {
+ case 'c':
+ case 's':
+ /* try to read optional parameter, pc unchanged if no parm */
+ ptr = &remcomInBuffer[1];
+ if (kgdb_hex2long(&ptr, &addr))
+ linux_regs->ip = addr;
+ case 'D':
+ case 'k':
+ newPC = linux_regs->ip;
+
+ /* clear the trace bit */
+ linux_regs->flags &= ~X86_EFLAGS_TF;
+ atomic_set(&kgdb_cpu_doing_single_step, -1);
+
+ /* set the trace bit if we're stepping */
+ if (remcomInBuffer[0] == 's') {
+ linux_regs->flags |= X86_EFLAGS_TF;
+ kgdb_single_step = 1;
+ if (kgdb_contthread) {
+ atomic_set(&kgdb_cpu_doing_single_step,
+ raw_smp_processor_id());
+ }
+ }
+
+ get_debugreg(dr6, 6);
+ if (!(dr6 & 0x4000)) {
+ int breakno;
+
+ for (breakno = 0; breakno < 4; breakno++) {
+ if (dr6 & (1 << breakno) &&
+ breakinfo[breakno].type == 0) {
+ /* Set restore flag: */
+ linux_regs->flags |= X86_EFLAGS_RF;
+ break;
+ }
+ }
+ }
+ set_debugreg(0UL, 6);
+ kgdb_correct_hw_break();
+
+ return 0;
+ }
+
+ /* this means that we do not want to exit from the handler: */
+ return -1;
+}
+
+static inline int
+single_step_cont(struct pt_regs *regs, struct die_args *args)
+{
+ /*
+ * Single step exception from kernel space to user space so
+ * eat the exception and continue the process:
+ */
+ printk(KERN_ERR "KGDB: trap/step from kernel to user space, "
+ "resuming...\n");
+ kgdb_arch_handle_exception(args->trapnr, args->signr,
+ args->err, "c", "", regs);
+
+ return NOTIFY_STOP;
+}
+
+static int was_in_debug_nmi[NR_CPUS];
+
+static int __kgdb_notify(struct die_args *args, unsigned long cmd)
+{
+ struct pt_regs *regs = args->regs;
+
+ switch (cmd) {
+ case DIE_NMI:
+ if (atomic_read(&kgdb_active) != -1) {
+ /* KGDB CPU roundup */
+ kgdb_nmicallback(raw_smp_processor_id(), regs);
+ was_in_debug_nmi[raw_smp_processor_id()] = 1;
+ touch_nmi_watchdog();
+ return NOTIFY_STOP;
+ }
+ return NOTIFY_DONE;
+
+ case DIE_NMI_IPI:
+ if (atomic_read(&kgdb_active) != -1) {
+ /* KGDB CPU roundup */
+ kgdb_nmicallback(raw_smp_processor_id(), regs);
+ was_in_debug_nmi[raw_smp_processor_id()] = 1;
+ touch_nmi_watchdog();
+ }
+ return NOTIFY_DONE;
+
+ case DIE_NMIUNKNOWN:
+ if (was_in_debug_nmi[raw_smp_processor_id()]) {
+ was_in_debug_nmi[raw_smp_processor_id()] = 0;
+ return NOTIFY_STOP;
+ }
+ return NOTIFY_DONE;
+
+ case DIE_NMIWATCHDOG:
+ if (atomic_read(&kgdb_active) != -1) {
+ /* KGDB CPU roundup: */
+ kgdb_nmicallback(raw_smp_processor_id(), regs);
+ return NOTIFY_STOP;
+ }
+ /* Enter debugger: */
+ break;
+
+ case DIE_DEBUG:
+ if (atomic_read(&kgdb_cpu_doing_single_step) ==
+ raw_smp_processor_id() &&
+ user_mode(regs))
+ return single_step_cont(regs, args);
+ /* fall through */
+ default:
+ if (user_mode(regs))
+ return NOTIFY_DONE;
+ }
+
+ if (kgdb_handle_exception(args->trapnr, args->signr, args->err, regs))
+ return NOTIFY_DONE;
+
+ /* Must touch watchdog before return to normal operation */
+ touch_nmi_watchdog();
+ return NOTIFY_STOP;
+}
+
+static int
+kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
+{
+ unsigned long flags;
+ int ret;
+
+ local_irq_save(flags);
+ ret = __kgdb_notify(ptr, cmd);
+ local_irq_restore(flags);
+
+ return ret;
+}
+
+static struct notifier_block kgdb_notifier = {
+ .notifier_call = kgdb_notify,
+
+ /*
+ * Lowest-prio notifier priority, we want to be notified last:
+ */
+ .priority = -INT_MAX,
+};
+
+/**
+ * kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ * This function will handle the initalization of any architecture
+ * specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+ return register_die_notifier(&kgdb_notifier);
+}
+
+/**
+ * kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ * This function will handle the uninitalization of any architecture
+ * specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+ unregister_die_notifier(&kgdb_notifier);
+}
+
+/**
+ *
+ * kgdb_skipexception - Bail out of KGDB when we've been triggered.
+ * @exception: Exception vector number
+ * @regs: Current &struct pt_regs.
+ *
+ * On some architectures we need to skip a breakpoint exception when
+ * it occurs after a breakpoint has been removed.
+ *
+ * Skip an int3 exception when it occurs after a breakpoint has been
+ * removed. Backtrack eip by 1 since the int3 would have caused it to
+ * increment by 1.
+ */
+int kgdb_skipexception(int exception, struct pt_regs *regs)
+{
+ if (exception == 3 && kgdb_isremovedbreak(regs->ip - 1)) {
+ regs->ip -= 1;
+ return 1;
+ }
+ return 0;
+}
+
+unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
+{
+ if (exception == 3)
+ return instruction_pointer(regs) - 1;
+ return instruction_pointer(regs);
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+ /* Breakpoint instruction: */
+ .gdb_bpt_instr = { 0xcc },
+ .flags = KGDB_HW_BREAKPOINT,
+ .set_hw_breakpoint = kgdb_set_hw_break,
+ .remove_hw_breakpoint = kgdb_remove_hw_break,
+ .remove_all_hw_break = kgdb_remove_all_hw_break,
+ .correct_hw_break = kgdb_correct_hw_break,
+};
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 34a5912..b8c6743 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -410,13 +410,13 @@
static void __kprobes clear_btf(void)
{
if (test_thread_flag(TIF_DEBUGCTLMSR))
- wrmsrl(MSR_IA32_DEBUGCTLMSR, 0);
+ update_debugctlmsr(0);
}
static void __kprobes restore_btf(void)
{
if (test_thread_flag(TIF_DEBUGCTLMSR))
- wrmsrl(MSR_IA32_DEBUGCTLMSR, current->thread.debugctlmsr);
+ update_debugctlmsr(current->thread.debugctlmsr);
}
static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
@@ -489,7 +489,7 @@
break;
case KPROBE_HIT_SS:
if (p == kprobe_running()) {
- regs->flags &= ~TF_MASK;
+ regs->flags &= ~X86_EFLAGS_TF;
regs->flags |= kcb->kprobe_saved_flags;
return 0;
} else {
@@ -858,15 +858,15 @@
if (!cur)
return 0;
+ resume_execution(cur, regs, kcb);
+ regs->flags |= kcb->kprobe_saved_flags;
+ trace_hardirqs_fixup_flags(regs->flags);
+
if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
kcb->kprobe_status = KPROBE_HIT_SSDONE;
cur->post_handler(cur, regs, 0);
}
- resume_execution(cur, regs, kcb);
- regs->flags |= kcb->kprobe_saved_flags;
- trace_hardirqs_fixup_flags(regs->flags);
-
/* Restore back the original saved kprobes variables and continue. */
if (kcb->kprobe_status == KPROBE_REENTER) {
restore_previous_kprobe(kcb);
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 236d2f8..576a03d 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -233,6 +233,7 @@
void arch_crash_save_vmcoreinfo(void)
{
+ VMCOREINFO_SYMBOL(phys_base);
VMCOREINFO_SYMBOL(init_level4_pgt);
#ifdef CONFIG_NUMA
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c
index 9482033..2dc1837 100644
--- a/arch/x86/kernel/mca_32.c
+++ b/arch/x86/kernel/mca_32.c
@@ -53,9 +53,9 @@
#include <linux/init.h>
#include <asm/arch_hooks.h>
-static unsigned char which_scsi = 0;
+static unsigned char which_scsi;
-int MCA_bus = 0;
+int MCA_bus;
EXPORT_SYMBOL(MCA_bus);
/*
@@ -68,15 +68,17 @@
/* Build the status info for the adapter */
-static void mca_configure_adapter_status(struct mca_device *mca_dev) {
+static void mca_configure_adapter_status(struct mca_device *mca_dev)
+{
mca_dev->status = MCA_ADAPTER_NONE;
mca_dev->pos_id = mca_dev->pos[0]
+ (mca_dev->pos[1] << 8);
- if(!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
+ if (!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
- /* id = 0x0000 usually indicates hardware failure,
+ /*
+ * id = 0x0000 usually indicates hardware failure,
* however, ZP Gu (zpg@castle.net> reports that his 9556
* has 0x0000 as id and everything still works. There
* also seem to be an adapter with id = 0x0000; the
@@ -87,9 +89,10 @@
mca_dev->status = MCA_ADAPTER_ERROR;
return;
- } else if(mca_dev->pos_id != 0xffff) {
+ } else if (mca_dev->pos_id != 0xffff) {
- /* 0xffff usually indicates that there's no adapter,
+ /*
+ * 0xffff usually indicates that there's no adapter,
* however, some integrated adapters may have 0xffff as
* their id and still be valid. Examples are on-board
* VGA of the 55sx, the integrated SCSI of the 56 & 57,
@@ -99,19 +102,19 @@
mca_dev->status = MCA_ADAPTER_NORMAL;
}
- if((mca_dev->pos_id == 0xffff ||
+ if ((mca_dev->pos_id == 0xffff ||
mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) {
int j;
- for(j = 2; j < 8; j++) {
- if(mca_dev->pos[j] != 0xff) {
+ for (j = 2; j < 8; j++) {
+ if (mca_dev->pos[j] != 0xff) {
mca_dev->status = MCA_ADAPTER_NORMAL;
break;
}
}
}
- if(!(mca_dev->pos[2] & MCA_ENABLED)) {
+ if (!(mca_dev->pos[2] & MCA_ENABLED)) {
/* enabled bit is in POS 2 */
@@ -133,7 +136,7 @@
#define MCA_STANDARD_RESOURCES ARRAY_SIZE(mca_standard_resources)
-/**
+/*
* mca_read_and_store_pos - read the POS registers into a memory buffer
* @pos: a char pointer to 8 bytes, contains the POS register value on
* successful return
@@ -141,12 +144,14 @@
* Returns 1 if a card actually exists (i.e. the pos isn't
* all 0xff) or 0 otherwise
*/
-static int mca_read_and_store_pos(unsigned char *pos) {
+static int mca_read_and_store_pos(unsigned char *pos)
+{
int j;
int found = 0;
- for(j=0; j<8; j++) {
- if((pos[j] = inb_p(MCA_POS_REG(j))) != 0xff) {
+ for (j = 0; j < 8; j++) {
+ pos[j] = inb_p(MCA_POS_REG(j));
+ if (pos[j] != 0xff) {
/* 0xff all across means no device. 0x00 means
* something's broken, but a device is
* probably there. However, if you get 0x00
@@ -167,11 +172,11 @@
unsigned char byte;
unsigned long flags;
- if(reg < 0 || reg >= 8)
+ if (reg < 0 || reg >= 8)
return 0;
spin_lock_irqsave(&mca_lock, flags);
- if(mca_dev->pos_register) {
+ if (mca_dev->pos_register) {
/* Disable adapter setup, enable motherboard setup */
outb_p(0, MCA_ADAPTER_SETUP_REG);
@@ -203,7 +208,7 @@
{
unsigned long flags;
- if(reg < 0 || reg >= 8)
+ if (reg < 0 || reg >= 8)
return;
spin_lock_irqsave(&mca_lock, flags);
@@ -227,17 +232,17 @@
}
/* for the primary MCA bus, we have identity transforms */
-static int mca_dummy_transform_irq(struct mca_device * mca_dev, int irq)
+static int mca_dummy_transform_irq(struct mca_device *mca_dev, int irq)
{
return irq;
}
-static int mca_dummy_transform_ioport(struct mca_device * mca_dev, int port)
+static int mca_dummy_transform_ioport(struct mca_device *mca_dev, int port)
{
return port;
}
-static void *mca_dummy_transform_memory(struct mca_device * mca_dev, void *mem)
+static void *mca_dummy_transform_memory(struct mca_device *mca_dev, void *mem)
{
return mem;
}
@@ -251,7 +256,8 @@
short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00};
struct mca_bus *bus;
- /* WARNING: Be careful when making changes here. Putting an adapter
+ /*
+ * WARNING: Be careful when making changes here. Putting an adapter
* and the motherboard simultaneously into setup mode may result in
* damage to chips (according to The Indispensible PC Hardware Book
* by Hans-Peter Messmer). Also, we disable system interrupts (so
@@ -283,7 +289,7 @@
/* get the motherboard device */
mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL);
- if(unlikely(!mca_dev))
+ if (unlikely(!mca_dev))
goto out_nomem;
/*
@@ -309,7 +315,7 @@
mca_register_device(MCA_PRIMARY_BUS, mca_dev);
mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
- if(unlikely(!mca_dev))
+ if (unlikely(!mca_dev))
goto out_unlock_nomem;
/* Put motherboard into video setup mode, read integrated video
@@ -326,7 +332,8 @@
mca_dev->slot = MCA_INTEGVIDEO;
mca_register_device(MCA_PRIMARY_BUS, mca_dev);
- /* Put motherboard into scsi setup mode, read integrated scsi
+ /*
+ * Put motherboard into scsi setup mode, read integrated scsi
* POS registers, and turn motherboard setup off.
*
* It seems there are two possible SCSI registers. Martin says that
@@ -338,18 +345,18 @@
* machine.
*/
- for(i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
+ for (i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG);
- if(mca_read_and_store_pos(pos))
+ if (mca_read_and_store_pos(pos))
break;
}
- if(which_scsi) {
+ if (which_scsi) {
/* found a scsi card */
mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
- if(unlikely(!mca_dev))
+ if (unlikely(!mca_dev))
goto out_unlock_nomem;
- for(j = 0; j < 8; j++)
+ for (j = 0; j < 8; j++)
mca_dev->pos[j] = pos[j];
mca_configure_adapter_status(mca_dev);
@@ -364,21 +371,22 @@
outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
- /* Now loop over MCA slots: put each adapter into setup mode, and
+ /*
+ * Now loop over MCA slots: put each adapter into setup mode, and
* read its POS registers. Then put adapter setup off.
*/
- for(i=0; i<MCA_MAX_SLOT_NR; i++) {
+ for (i = 0; i < MCA_MAX_SLOT_NR; i++) {
outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG);
- if(!mca_read_and_store_pos(pos))
+ if (!mca_read_and_store_pos(pos))
continue;
mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
- if(unlikely(!mca_dev))
+ if (unlikely(!mca_dev))
goto out_unlock_nomem;
- for(j=0; j<8; j++)
- mca_dev->pos[j]=pos[j];
+ for (j = 0; j < 8; j++)
+ mca_dev->pos[j] = pos[j];
mca_dev->driver_loaded = 0;
mca_dev->slot = i;
@@ -414,20 +422,20 @@
{
int slot = mca_dev->slot;
- if(slot == MCA_INTEGSCSI) {
+ if (slot == MCA_INTEGSCSI) {
printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n",
mca_dev->name);
- } else if(slot == MCA_INTEGVIDEO) {
+ } else if (slot == MCA_INTEGVIDEO) {
printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n",
mca_dev->name);
- } else if(slot == MCA_MOTHERBOARD) {
+ } else if (slot == MCA_MOTHERBOARD) {
printk(KERN_CRIT "NMI: caused by motherboard (%s)\n",
mca_dev->name);
}
/* More info available in POS 6 and 7? */
- if(check_flag) {
+ if (check_flag) {
unsigned char pos6, pos7;
pos6 = mca_device_read_pos(mca_dev, 6);
@@ -447,8 +455,9 @@
pos5 = mca_device_read_pos(mca_dev, 5);
- if(!(pos5 & 0x80)) {
- /* Bit 7 of POS 5 is reset when this adapter has a hardware
+ if (!(pos5 & 0x80)) {
+ /*
+ * Bit 7 of POS 5 is reset when this adapter has a hardware
* error. Bit 7 it reset if there's error information
* available in POS 6 and 7.
*/
@@ -460,7 +469,8 @@
void __kprobes mca_handle_nmi(void)
{
- /* First try - scan the various adapters and see if a specific
+ /*
+ * First try - scan the various adapters and see if a specific
* adapter was responsible for the error.
*/
bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback);
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index f2702d0..25cf6de 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -290,7 +290,7 @@
}
return 0;
find:
- pr_debug("microcode: CPU %d found a matching microcode update with"
+ pr_debug("microcode: CPU%d found a matching microcode update with"
" version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev);
new_mc = vmalloc(total_size);
if (!new_mc) {
@@ -336,11 +336,11 @@
spin_unlock_irqrestore(µcode_update_lock, flags);
if (val[1] != uci->mc->hdr.rev) {
- printk(KERN_ERR "microcode: CPU%d updated from revision "
+ printk(KERN_ERR "microcode: CPU%d update from revision "
"0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]);
return;
}
- pr_debug("microcode: CPU%d updated from revision "
+ printk(KERN_INFO "microcode: CPU%d updated from revision "
"0x%x to 0x%x, date = %08x \n",
cpu_num, uci->rev, val[1], uci->mc->hdr.date);
uci->rev = val[1];
@@ -534,7 +534,7 @@
c->x86, c->x86_model, c->x86_mask);
error = request_firmware(&firmware, name, µcode_pdev->dev);
if (error) {
- pr_debug("ucode data file %s load failed\n", name);
+ pr_debug("microcode: ucode data file %s load failed\n", name);
return error;
}
buf = firmware->data;
@@ -709,7 +709,7 @@
if (!cpu_online(cpu))
return 0;
- pr_debug("Microcode:CPU %d added\n", cpu);
+ pr_debug("microcode: CPU%d added\n", cpu);
memset(uci, 0, sizeof(*uci));
err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
@@ -733,7 +733,7 @@
if (!cpu_online(cpu))
return 0;
- pr_debug("Microcode:CPU %d removed\n", cpu);
+ pr_debug("microcode: CPU%d removed\n", cpu);
microcode_fini_cpu(cpu);
sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
return 0;
@@ -745,7 +745,7 @@
if (!cpu_online(cpu))
return 0;
- pr_debug("Microcode:CPU %d resumed\n", cpu);
+ pr_debug("microcode: CPU%d resumed\n", cpu);
/* only CPU 0 will apply ucode here */
apply_microcode(0);
return 0;
@@ -783,7 +783,7 @@
}
case CPU_DOWN_FAILED_FROZEN:
if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
- printk(KERN_ERR "Microcode: Failed to create the sysfs "
+ printk(KERN_ERR "microcode: Failed to create the sysfs "
"group for CPU%d\n", cpu);
break;
case CPU_DOWN_PREPARE:
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
new file mode 100644
index 0000000..70744e3
--- /dev/null
+++ b/arch/x86/kernel/mpparse.c
@@ -0,0 +1,1105 @@
+/*
+ * Intel Multiprocessor Specification 1.1 and 1.4
+ * compliant MP-table parsing routines.
+ *
+ * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ * (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bitops.h>
+#include <linux/acpi.h>
+#include <linux/module.h>
+
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/pgalloc.h>
+#include <asm/io_apic.h>
+#include <asm/proto.h>
+#include <asm/acpi.h>
+#include <asm/bios_ebda.h>
+
+#include <mach_apic.h>
+#ifdef CONFIG_X86_32
+#include <mach_apicdef.h>
+#include <mach_mpparse.h>
+#endif
+
+/* Have we found an MP table */
+int smp_found_config;
+
+/*
+ * Various Linux-internal data structures created from the
+ * MP-table.
+ */
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+int mp_bus_id_to_type[MAX_MP_BUSSES];
+#endif
+
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 };
+
+static int mp_current_pci_id;
+
+int pic_mode;
+
+/*
+ * Intel MP BIOS table parsing routines:
+ */
+
+/*
+ * Checksum an MP configuration block.
+ */
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+ int sum = 0;
+
+ while (len--)
+ sum += *mp++;
+
+ return sum & 0xFF;
+}
+
+#ifdef CONFIG_X86_NUMAQ
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+
+static int mpc_record;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
+ __cpuinitdata;
+#endif
+
+static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
+{
+ int apicid;
+ char *bootup_cpu = "";
+
+ if (!(m->mpc_cpuflag & CPU_ENABLED)) {
+ disabled_cpus++;
+ return;
+ }
+#ifdef CONFIG_X86_NUMAQ
+ apicid = mpc_apic_id(m, translation_table[mpc_record]);
+#else
+ apicid = m->mpc_apicid;
+#endif
+ if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
+ bootup_cpu = " (Bootup-CPU)";
+ boot_cpu_physical_apicid = m->mpc_apicid;
+ }
+
+ printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
+ generic_processor_info(apicid, m->mpc_apicver);
+}
+
+static void __init MP_bus_info(struct mpc_config_bus *m)
+{
+ char str[7];
+
+ memcpy(str, m->mpc_bustype, 6);
+ str[6] = 0;
+
+#ifdef CONFIG_X86_NUMAQ
+ mpc_oem_bus_info(m, str, translation_table[mpc_record]);
+#else
+ Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
+#endif
+
+#if MAX_MP_BUSSES < 256
+ if (m->mpc_busid >= MAX_MP_BUSSES) {
+ printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
+ " is too large, max. supported is %d\n",
+ m->mpc_busid, str, MAX_MP_BUSSES - 1);
+ return;
+ }
+#endif
+
+ if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
+ set_bit(m->mpc_busid, mp_bus_not_pci);
+#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
+#endif
+ } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
+#ifdef CONFIG_X86_NUMAQ
+ mpc_oem_pci_bus(m, translation_table[mpc_record]);
+#endif
+ clear_bit(m->mpc_busid, mp_bus_not_pci);
+ mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
+ mp_current_pci_id++;
+#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
+ } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
+ } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) {
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
+#endif
+ } else
+ printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
+}
+
+#ifdef CONFIG_X86_IO_APIC
+
+static int bad_ioapic(unsigned long address)
+{
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+ "(found %d)\n", MAX_IO_APICS, nr_ioapics);
+ panic("Recompile kernel with bigger MAX_IO_APICS!\n");
+ }
+ if (!address) {
+ printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
+ " found in table, skipping!\n");
+ return 1;
+ }
+ return 0;
+}
+
+static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
+{
+ if (!(m->mpc_flags & MPC_APIC_USABLE))
+ return;
+
+ printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
+ m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
+
+ if (bad_ioapic(m->mpc_apicaddr))
+ return;
+
+ mp_ioapics[nr_ioapics] = *m;
+ nr_ioapics++;
+}
+
+static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
+{
+ mp_irqs[mp_irq_entries] = *m;
+ Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
+ " IRQ %02x, APIC ID %x, APIC INT %02x\n",
+ m->mpc_irqtype, m->mpc_irqflag & 3,
+ (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
+ m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!!\n");
+}
+
+#endif
+
+static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
+{
+ Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
+ " IRQ %02x, APIC ID %x, APIC LINT %02x\n",
+ m->mpc_irqtype, m->mpc_irqflag & 3,
+ (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
+ m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
+}
+
+#ifdef CONFIG_X86_NUMAQ
+static void __init MP_translation_info(struct mpc_config_translation *m)
+{
+ printk(KERN_INFO
+ "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+ mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+ m->trans_local);
+
+ if (mpc_record >= MAX_MPC_ENTRY)
+ printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+ else
+ translation_table[mpc_record] = m; /* stash this for later */
+ if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+ node_set_online(m->trans_quad);
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
+ unsigned short oemsize)
+{
+ int count = sizeof(*oemtable); /* the header size */
+ unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
+ mpc_record = 0;
+ printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
+ oemtable);
+ if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
+ printk(KERN_WARNING
+ "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+ oemtable->oem_signature[0], oemtable->oem_signature[1],
+ oemtable->oem_signature[2], oemtable->oem_signature[3]);
+ return;
+ }
+ if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
+ printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+ return;
+ }
+ while (count < oemtable->oem_length) {
+ switch (*oemptr) {
+ case MP_TRANSLATION:
+ {
+ struct mpc_config_translation *m =
+ (struct mpc_config_translation *)oemptr;
+ MP_translation_info(m);
+ oemptr += sizeof(*m);
+ count += sizeof(*m);
+ ++mpc_record;
+ break;
+ }
+ default:
+ {
+ printk(KERN_WARNING
+ "Unrecognised OEM table entry type! - %d\n",
+ (int)*oemptr);
+ return;
+ }
+ }
+ }
+}
+
+static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ if (strncmp(oem, "IBM NUMA", 8))
+ printk("Warning! May not be a NUMA-Q system!\n");
+ if (mpc->mpc_oemptr)
+ smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
+ mpc->mpc_oemsize);
+}
+#endif /* CONFIG_X86_NUMAQ */
+
+/*
+ * Read/parse the MPC
+ */
+
+static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
+{
+ char str[16];
+ char oem[10];
+ int count = sizeof(*mpc);
+ unsigned char *mpt = ((unsigned char *)mpc) + count;
+
+ if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) {
+ printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n",
+ mpc->mpc_signature[0], mpc->mpc_signature[1],
+ mpc->mpc_signature[2], mpc->mpc_signature[3]);
+ return 0;
+ }
+ if (mpf_checksum((unsigned char *)mpc, mpc->mpc_length)) {
+ printk(KERN_ERR "MPTABLE: checksum error!\n");
+ return 0;
+ }
+ if (mpc->mpc_spec != 0x01 && mpc->mpc_spec != 0x04) {
+ printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
+ mpc->mpc_spec);
+ return 0;
+ }
+ if (!mpc->mpc_lapic) {
+ printk(KERN_ERR "MPTABLE: null local APIC address!\n");
+ return 0;
+ }
+ memcpy(oem, mpc->mpc_oem, 8);
+ oem[8] = 0;
+ printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem);
+
+ memcpy(str, mpc->mpc_productid, 12);
+ str[12] = 0;
+ printk("Product ID: %s ", str);
+
+#ifdef CONFIG_X86_32
+ mps_oem_check(mpc, oem, str);
+#endif
+ printk(KERN_INFO "MPTABLE: Product ID: %s ", str);
+
+ printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic);
+
+ /* save the local APIC address, it might be non-default */
+ if (!acpi_lapic)
+ mp_lapic_addr = mpc->mpc_lapic;
+
+ if (early)
+ return 1;
+
+ /*
+ * Now process the configuration blocks.
+ */
+#ifdef CONFIG_X86_NUMAQ
+ mpc_record = 0;
+#endif
+ while (count < mpc->mpc_length) {
+ switch (*mpt) {
+ case MP_PROCESSOR:
+ {
+ struct mpc_config_processor *m =
+ (struct mpc_config_processor *)mpt;
+ /* ACPI may have already provided this data */
+ if (!acpi_lapic)
+ MP_processor_info(m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
+ break;
+ }
+ case MP_BUS:
+ {
+ struct mpc_config_bus *m =
+ (struct mpc_config_bus *)mpt;
+ MP_bus_info(m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
+ break;
+ }
+ case MP_IOAPIC:
+ {
+#ifdef CONFIG_X86_IO_APIC
+ struct mpc_config_ioapic *m =
+ (struct mpc_config_ioapic *)mpt;
+ MP_ioapic_info(m);
+#endif
+ mpt += sizeof(struct mpc_config_ioapic);
+ count += sizeof(struct mpc_config_ioapic);
+ break;
+ }
+ case MP_INTSRC:
+ {
+#ifdef CONFIG_X86_IO_APIC
+ struct mpc_config_intsrc *m =
+ (struct mpc_config_intsrc *)mpt;
+
+ MP_intsrc_info(m);
+#endif
+ mpt += sizeof(struct mpc_config_intsrc);
+ count += sizeof(struct mpc_config_intsrc);
+ break;
+ }
+ case MP_LINTSRC:
+ {
+ struct mpc_config_lintsrc *m =
+ (struct mpc_config_lintsrc *)mpt;
+ MP_lintsrc_info(m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
+ break;
+ }
+ default:
+ /* wrong mptable */
+ printk(KERN_ERR "Your mptable is wrong, contact your HW vendor!\n");
+ printk(KERN_ERR "type %x\n", *mpt);
+ print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16,
+ 1, mpc, mpc->mpc_length, 1);
+ count = mpc->mpc_length;
+ break;
+ }
+#ifdef CONFIG_X86_NUMAQ
+ ++mpc_record;
+#endif
+ }
+ setup_apic_routing();
+ if (!num_processors)
+ printk(KERN_ERR "MPTABLE: no processors registered!\n");
+ return num_processors;
+}
+
+#ifdef CONFIG_X86_IO_APIC
+
+static int __init ELCR_trigger(unsigned int irq)
+{
+ unsigned int port;
+
+ port = 0x4d0 + (irq >> 3);
+ return (inb(port) >> (irq & 7)) & 1;
+}
+
+static void __init construct_default_ioirq_mptable(int mpc_default_type)
+{
+ struct mpc_config_intsrc intsrc;
+ int i;
+ int ELCR_fallback = 0;
+
+ intsrc.mpc_type = MP_INTSRC;
+ intsrc.mpc_irqflag = 0; /* conforming */
+ intsrc.mpc_srcbus = 0;
+ intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
+
+ intsrc.mpc_irqtype = mp_INT;
+
+ /*
+ * If true, we have an ISA/PCI system with no IRQ entries
+ * in the MP table. To prevent the PCI interrupts from being set up
+ * incorrectly, we try to use the ELCR. The sanity check to see if
+ * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
+ * never be level sensitive, so we simply see if the ELCR agrees.
+ * If it does, we assume it's valid.
+ */
+ if (mpc_default_type == 5) {
+ printk(KERN_INFO "ISA/PCI bus type with no IRQ information... "
+ "falling back to ELCR\n");
+
+ if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
+ ELCR_trigger(13))
+ printk(KERN_ERR "ELCR contains invalid data... "
+ "not using ELCR\n");
+ else {
+ printk(KERN_INFO
+ "Using ELCR to identify PCI interrupts\n");
+ ELCR_fallback = 1;
+ }
+ }
+
+ for (i = 0; i < 16; i++) {
+ switch (mpc_default_type) {
+ case 2:
+ if (i == 0 || i == 13)
+ continue; /* IRQ0 & IRQ13 not connected */
+ /* fall through */
+ default:
+ if (i == 2)
+ continue; /* IRQ2 is never connected */
+ }
+
+ if (ELCR_fallback) {
+ /*
+ * If the ELCR indicates a level-sensitive interrupt, we
+ * copy that information over to the MP table in the
+ * irqflag field (level sensitive, active high polarity).
+ */
+ if (ELCR_trigger(i))
+ intsrc.mpc_irqflag = 13;
+ else
+ intsrc.mpc_irqflag = 0;
+ }
+
+ intsrc.mpc_srcbusirq = i;
+ intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
+ MP_intsrc_info(&intsrc);
+ }
+
+ intsrc.mpc_irqtype = mp_ExtINT;
+ intsrc.mpc_srcbusirq = 0;
+ intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
+ MP_intsrc_info(&intsrc);
+}
+
+#endif
+
+static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+{
+ struct mpc_config_processor processor;
+ struct mpc_config_bus bus;
+#ifdef CONFIG_X86_IO_APIC
+ struct mpc_config_ioapic ioapic;
+#endif
+ struct mpc_config_lintsrc lintsrc;
+ int linttypes[2] = { mp_ExtINT, mp_NMI };
+ int i;
+
+ /*
+ * local APIC has default address
+ */
+ mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+ /*
+ * 2 CPUs, numbered 0 & 1.
+ */
+ processor.mpc_type = MP_PROCESSOR;
+ /* Either an integrated APIC or a discrete 82489DX. */
+ processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ processor.mpc_cpuflag = CPU_ENABLED;
+ processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
+ (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+ processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+ processor.mpc_reserved[0] = 0;
+ processor.mpc_reserved[1] = 0;
+ for (i = 0; i < 2; i++) {
+ processor.mpc_apicid = i;
+ MP_processor_info(&processor);
+ }
+
+ bus.mpc_type = MP_BUS;
+ bus.mpc_busid = 0;
+ switch (mpc_default_type) {
+ default:
+ printk(KERN_ERR "???\nUnknown standard configuration %d\n",
+ mpc_default_type);
+ /* fall through */
+ case 1:
+ case 5:
+ memcpy(bus.mpc_bustype, "ISA ", 6);
+ break;
+ case 2:
+ case 6:
+ case 3:
+ memcpy(bus.mpc_bustype, "EISA ", 6);
+ break;
+ case 4:
+ case 7:
+ memcpy(bus.mpc_bustype, "MCA ", 6);
+ }
+ MP_bus_info(&bus);
+ if (mpc_default_type > 4) {
+ bus.mpc_busid = 1;
+ memcpy(bus.mpc_bustype, "PCI ", 6);
+ MP_bus_info(&bus);
+ }
+
+#ifdef CONFIG_X86_IO_APIC
+ ioapic.mpc_type = MP_IOAPIC;
+ ioapic.mpc_apicid = 2;
+ ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ ioapic.mpc_flags = MPC_APIC_USABLE;
+ ioapic.mpc_apicaddr = 0xFEC00000;
+ MP_ioapic_info(&ioapic);
+
+ /*
+ * We set up most of the low 16 IO-APIC pins according to MPS rules.
+ */
+ construct_default_ioirq_mptable(mpc_default_type);
+#endif
+ lintsrc.mpc_type = MP_LINTSRC;
+ lintsrc.mpc_irqflag = 0; /* conforming */
+ lintsrc.mpc_srcbusid = 0;
+ lintsrc.mpc_srcbusirq = 0;
+ lintsrc.mpc_destapic = MP_APIC_ALL;
+ for (i = 0; i < 2; i++) {
+ lintsrc.mpc_irqtype = linttypes[i];
+ lintsrc.mpc_destapiclint = i;
+ MP_lintsrc_info(&lintsrc);
+ }
+}
+
+static struct intel_mp_floating *mpf_found;
+
+/*
+ * Scan the memory blocks for an SMP configuration block.
+ */
+static void __init __get_smp_config(unsigned early)
+{
+ struct intel_mp_floating *mpf = mpf_found;
+
+ if (acpi_lapic && early)
+ return;
+ /*
+ * ACPI supports both logical (e.g. Hyper-Threading) and physical
+ * processors, where MPS only supports physical.
+ */
+ if (acpi_lapic && acpi_ioapic) {
+ printk(KERN_INFO "Using ACPI (MADT) for SMP configuration "
+ "information\n");
+ return;
+ } else if (acpi_lapic)
+ printk(KERN_INFO "Using ACPI for processor (LAPIC) "
+ "configuration information\n");
+
+ printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
+ mpf->mpf_specification);
+#ifdef CONFIG_X86_32
+ if (mpf->mpf_feature2 & (1 << 7)) {
+ printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
+ pic_mode = 1;
+ } else {
+ printk(KERN_INFO " Virtual Wire compatibility mode.\n");
+ pic_mode = 0;
+ }
+#endif
+ /*
+ * Now see if we need to read further.
+ */
+ if (mpf->mpf_feature1 != 0) {
+ if (early) {
+ /*
+ * local APIC has default address
+ */
+ mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+ return;
+ }
+
+ printk(KERN_INFO "Default MP configuration #%d\n",
+ mpf->mpf_feature1);
+ construct_default_ISA_mptable(mpf->mpf_feature1);
+
+ } else if (mpf->mpf_physptr) {
+
+ /*
+ * Read the physical hardware table. Anything here will
+ * override the defaults.
+ */
+ if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) {
+ smp_found_config = 0;
+ printk(KERN_ERR
+ "BIOS bug, MP table errors detected!...\n");
+ printk(KERN_ERR "... disabling SMP support. "
+ "(tell your hw vendor)\n");
+ return;
+ }
+
+ if (early)
+ return;
+#ifdef CONFIG_X86_IO_APIC
+ /*
+ * If there are no explicit MP IRQ entries, then we are
+ * broken. We set up most of the low 16 IO-APIC pins to
+ * ISA defaults and hope it will work.
+ */
+ if (!mp_irq_entries) {
+ struct mpc_config_bus bus;
+
+ printk(KERN_ERR "BIOS bug, no explicit IRQ entries, "
+ "using default mptable. "
+ "(tell your hw vendor)\n");
+
+ bus.mpc_type = MP_BUS;
+ bus.mpc_busid = 0;
+ memcpy(bus.mpc_bustype, "ISA ", 6);
+ MP_bus_info(&bus);
+
+ construct_default_ioirq_mptable(0);
+ }
+#endif
+ } else
+ BUG();
+
+ if (!early)
+ printk(KERN_INFO "Processors: %d\n", num_processors);
+ /*
+ * Only use the first configuration found.
+ */
+}
+
+void __init early_get_smp_config(void)
+{
+ __get_smp_config(1);
+}
+
+void __init get_smp_config(void)
+{
+ __get_smp_config(0);
+}
+
+static int __init smp_scan_config(unsigned long base, unsigned long length,
+ unsigned reserve)
+{
+ extern void __bad_mpf_size(void);
+ unsigned int *bp = phys_to_virt(base);
+ struct intel_mp_floating *mpf;
+
+ Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length);
+ if (sizeof(*mpf) != 16)
+ __bad_mpf_size();
+
+ while (length > 0) {
+ mpf = (struct intel_mp_floating *)bp;
+ if ((*bp == SMP_MAGIC_IDENT) &&
+ (mpf->mpf_length == 1) &&
+ !mpf_checksum((unsigned char *)bp, 16) &&
+ ((mpf->mpf_specification == 1)
+ || (mpf->mpf_specification == 4))) {
+
+ smp_found_config = 1;
+ mpf_found = mpf;
+#ifdef CONFIG_X86_32
+ printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
+ mpf, virt_to_phys(mpf));
+ reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE,
+ BOOTMEM_DEFAULT);
+ if (mpf->mpf_physptr) {
+ /*
+ * We cannot access to MPC table to compute
+ * table size yet, as only few megabytes from
+ * the bottom is mapped now.
+ * PC-9800's MPC table places on the very last
+ * of physical memory; so that simply reserving
+ * PAGE_SIZE from mpg->mpf_physptr yields BUG()
+ * in reserve_bootmem.
+ */
+ unsigned long size = PAGE_SIZE;
+ unsigned long end = max_low_pfn * PAGE_SIZE;
+ if (mpf->mpf_physptr + size > end)
+ size = end - mpf->mpf_physptr;
+ reserve_bootmem(mpf->mpf_physptr, size,
+ BOOTMEM_DEFAULT);
+ }
+
+#else
+ if (!reserve)
+ return 1;
+
+ reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
+ if (mpf->mpf_physptr)
+ reserve_bootmem_generic(mpf->mpf_physptr,
+ PAGE_SIZE);
+#endif
+ return 1;
+ }
+ bp += 4;
+ length -= 16;
+ }
+ return 0;
+}
+
+static void __init __find_smp_config(unsigned reserve)
+{
+ unsigned int address;
+
+ /*
+ * FIXME: Linux assumes you have 640K of base ram..
+ * this continues the error...
+ *
+ * 1) Scan the bottom 1K for a signature
+ * 2) Scan the top 1K of base RAM
+ * 3) Scan the 64K of bios
+ */
+ if (smp_scan_config(0x0, 0x400, reserve) ||
+ smp_scan_config(639 * 0x400, 0x400, reserve) ||
+ smp_scan_config(0xF0000, 0x10000, reserve))
+ return;
+ /*
+ * If it is an SMP machine we should know now, unless the
+ * configuration is in an EISA/MCA bus machine with an
+ * extended bios data area.
+ *
+ * there is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E, calculate and scan it here.
+ *
+ * NOTE! There are Linux loaders that will corrupt the EBDA
+ * area, and as such this kind of SMP config may be less
+ * trustworthy, simply because the SMP table may have been
+ * stomped on during early boot. These loaders are buggy and
+ * should be fixed.
+ *
+ * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
+ */
+
+ address = get_bios_ebda();
+ if (address)
+ smp_scan_config(address, 0x400, reserve);
+}
+
+void __init early_find_smp_config(void)
+{
+ __find_smp_config(0);
+}
+
+void __init find_smp_config(void)
+{
+ __find_smp_config(1);
+}
+
+/* --------------------------------------------------------------------------
+ ACPI-based MP Configuration
+ -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI
+
+#ifdef CONFIG_X86_IO_APIC
+
+#define MP_ISA_BUS 0
+#define MP_MAX_IOAPIC_PIN 127
+
+extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
+
+static int mp_find_ioapic(int gsi)
+{
+ int i = 0;
+
+ /* Find the IOAPIC that manages this GSI. */
+ for (i = 0; i < nr_ioapics; i++) {
+ if ((gsi >= mp_ioapic_routing[i].gsi_base)
+ && (gsi <= mp_ioapic_routing[i].gsi_end))
+ return i;
+ }
+
+ printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+ return -1;
+}
+
+static u8 uniq_ioapic_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+ !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ return io_apic_get_unique_id(nr_ioapics, id);
+ else
+ return id;
+#else
+ int i;
+ DECLARE_BITMAP(used, 256);
+ bitmap_zero(used, 256);
+ for (i = 0; i < nr_ioapics; i++) {
+ struct mpc_config_ioapic *ia = &mp_ioapics[i];
+ __set_bit(ia->mpc_apicid, used);
+ }
+ if (!test_bit(id, used))
+ return id;
+ return find_first_zero_bit(used, 256);
+#endif
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+ int idx = 0;
+
+ if (bad_ioapic(address))
+ return;
+
+ idx = nr_ioapics;
+
+ mp_ioapics[idx].mpc_type = MP_IOAPIC;
+ mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
+ mp_ioapics[idx].mpc_apicaddr = address;
+
+ set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+ mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
+#ifdef CONFIG_X86_32
+ mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
+#else
+ mp_ioapics[idx].mpc_apicver = 0;
+#endif
+ /*
+ * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+ * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+ */
+ mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
+ mp_ioapic_routing[idx].gsi_base = gsi_base;
+ mp_ioapic_routing[idx].gsi_end = gsi_base +
+ io_apic_get_redir_entries(idx);
+
+ printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+ "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
+ mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
+ mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
+
+ nr_ioapics++;
+}
+
+void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
+{
+ struct mpc_config_intsrc intsrc;
+ int ioapic = -1;
+ int pin = -1;
+
+ /*
+ * Convert 'gsi' to 'ioapic.pin'.
+ */
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0)
+ return;
+ pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+ /*
+ * TBD: This check is for faulty timer entries, where the override
+ * erroneously sets the trigger to level, resulting in a HUGE
+ * increase of timer interrupts!
+ */
+ if ((bus_irq == 0) && (trigger == 3))
+ trigger = 1;
+
+ intsrc.mpc_type = MP_INTSRC;
+ intsrc.mpc_irqtype = mp_INT;
+ intsrc.mpc_irqflag = (trigger << 2) | polarity;
+ intsrc.mpc_srcbus = MP_ISA_BUS;
+ intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
+ intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
+ intsrc.mpc_dstirq = pin; /* INTIN# */
+
+ Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
+ intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+ (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+ intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
+
+ mp_irqs[mp_irq_entries] = intsrc;
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!\n");
+}
+
+int es7000_plat;
+
+void __init mp_config_acpi_legacy_irqs(void)
+{
+ struct mpc_config_intsrc intsrc;
+ int i = 0;
+ int ioapic = -1;
+
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+ /*
+ * Fabricate the legacy ISA bus (bus #31).
+ */
+ mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+#endif
+ set_bit(MP_ISA_BUS, mp_bus_not_pci);
+ Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+
+ /*
+ * Older generations of ES7000 have no legacy identity mappings
+ */
+ if (es7000_plat == 1)
+ return;
+
+ /*
+ * Locate the IOAPIC that manages the ISA IRQs (0-15).
+ */
+ ioapic = mp_find_ioapic(0);
+ if (ioapic < 0)
+ return;
+
+ intsrc.mpc_type = MP_INTSRC;
+ intsrc.mpc_irqflag = 0; /* Conforming */
+ intsrc.mpc_srcbus = MP_ISA_BUS;
+#ifdef CONFIG_X86_IO_APIC
+ intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
+#endif
+ /*
+ * Use the default configuration for the IRQs 0-15. Unless
+ * overridden by (MADT) interrupt source override entries.
+ */
+ for (i = 0; i < 16; i++) {
+ int idx;
+
+ for (idx = 0; idx < mp_irq_entries; idx++) {
+ struct mpc_config_intsrc *irq = mp_irqs + idx;
+
+ /* Do we already have a mapping for this ISA IRQ? */
+ if (irq->mpc_srcbus == MP_ISA_BUS
+ && irq->mpc_srcbusirq == i)
+ break;
+
+ /* Do we already have a mapping for this IOAPIC pin */
+ if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
+ (irq->mpc_dstirq == i))
+ break;
+ }
+
+ if (idx != mp_irq_entries) {
+ printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+ continue; /* IRQ already used */
+ }
+
+ intsrc.mpc_irqtype = mp_INT;
+ intsrc.mpc_srcbusirq = i; /* Identity mapped */
+ intsrc.mpc_dstirq = i;
+
+ Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
+ "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+ (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+ intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
+ intsrc.mpc_dstirq);
+
+ mp_irqs[mp_irq_entries] = intsrc;
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!\n");
+ }
+}
+
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
+{
+ int ioapic = -1;
+ int ioapic_pin = 0;
+ int idx, bit = 0;
+#ifdef CONFIG_X86_32
+#define MAX_GSI_NUM 4096
+#define IRQ_COMPRESSION_START 64
+
+ static int pci_irq = IRQ_COMPRESSION_START;
+ /*
+ * Mapping between Global System Interrupts, which
+ * represent all possible interrupts, and IRQs
+ * assigned to actual devices.
+ */
+ static int gsi_to_irq[MAX_GSI_NUM];
+#else
+
+ if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+ return gsi;
+#endif
+
+ /* Don't set up the ACPI SCI because it's already set up */
+ if (acpi_gbl_FADT.sci_interrupt == gsi)
+ return gsi;
+
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0) {
+ printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
+ return gsi;
+ }
+
+ ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+#ifdef CONFIG_X86_32
+ if (ioapic_renumber_irq)
+ gsi = ioapic_renumber_irq(ioapic, gsi);
+#endif
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ bit = ioapic_pin % 32;
+ idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
+ if (idx > 3) {
+ printk(KERN_ERR "Invalid reference to IOAPIC pin "
+ "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ ioapic_pin);
+ return gsi;
+ }
+ if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
+ Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
+ mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+#ifdef CONFIG_X86_32
+ return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
+#else
+ return gsi;
+#endif
+ }
+
+ mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit);
+#ifdef CONFIG_X86_32
+ /*
+ * For GSI >= 64, use IRQ compression
+ */
+ if ((gsi >= IRQ_COMPRESSION_START)
+ && (triggering == ACPI_LEVEL_SENSITIVE)) {
+ /*
+ * For PCI devices assign IRQs in order, avoiding gaps
+ * due to unused I/O APIC pins.
+ */
+ int irq = gsi;
+ if (gsi < MAX_GSI_NUM) {
+ /*
+ * Retain the VIA chipset work-around (gsi > 15), but
+ * avoid a problem where the 8254 timer (IRQ0) is setup
+ * via an override (so it's not on pin 0 of the ioapic),
+ * and at the same time, the pin 0 interrupt is a PCI
+ * type. The gsi > 15 test could cause these two pins
+ * to be shared as IRQ0, and they are not shareable.
+ * So test for this condition, and if necessary, avoid
+ * the pin collision.
+ */
+ gsi = pci_irq++;
+ /*
+ * Don't assign IRQ used by ACPI SCI
+ */
+ if (gsi == acpi_gbl_FADT.sci_interrupt)
+ gsi = pci_irq++;
+ gsi_to_irq[irq] = gsi;
+ } else {
+ printk(KERN_ERR "GSI %u is too high\n", gsi);
+ return gsi;
+ }
+ }
+#endif
+ io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
+ triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ return gsi;
+}
+
+#endif /* CONFIG_X86_IO_APIC */
+#endif /* CONFIG_ACPI */
diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse_32.c
deleted file mode 100644
index f349e68..0000000
--- a/arch/x86/kernel/mpparse_32.c
+++ /dev/null
@@ -1,1139 +0,0 @@
-/*
- * Intel Multiprocessor Specification 1.1 and 1.4
- * compliant MP-table parsing routines.
- *
- * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- * Fixes
- * Erich Boleyn : MP v1.4 and additional changes.
- * Alan Cox : Added EBDA scanning
- * Ingo Molnar : various cleanups and rewrites
- * Maciej W. Rozycki: Bits for default MP configurations
- * Paul Diefenbaugh: Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/bitops.h>
-
-#include <asm/smp.h>
-#include <asm/acpi.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/io_apic.h>
-
-#include <mach_apic.h>
-#include <mach_apicdef.h>
-#include <mach_mpparse.h>
-#include <bios_ebda.h>
-
-/* Have we found an MP table */
-int smp_found_config;
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
-
-/*
- * Various Linux-internal data structures created from the
- * MP-table.
- */
-int apic_version [MAX_APICS];
-int mp_bus_id_to_type [MAX_MP_BUSSES];
-int mp_bus_id_to_node [MAX_MP_BUSSES];
-int mp_bus_id_to_local [MAX_MP_BUSSES];
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
-static int mp_current_pci_id;
-
-/* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
-
-/* # of MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
-
-/* MP IRQ source entries */
-int mp_irq_entries;
-
-int nr_ioapics;
-
-int pic_mode;
-unsigned long mp_lapic_addr;
-
-unsigned int def_to_bigsmp = 0;
-
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_physical_apicid = -1U;
-/* Internal processor count */
-unsigned int num_processors;
-
-/* Bitmask of physically existing CPUs */
-physid_mask_t phys_cpu_present_map;
-
-u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
-
-/*
- * Intel MP BIOS table parsing routines:
- */
-
-
-/*
- * Checksum an MP configuration block.
- */
-
-static int __init mpf_checksum(unsigned char *mp, int len)
-{
- int sum = 0;
-
- while (len--)
- sum += *mp++;
-
- return sum & 0xFF;
-}
-
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-
-static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata;
-
-static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
-{
- int ver, apicid;
- physid_mask_t phys_cpu;
-
- if (!(m->mpc_cpuflag & CPU_ENABLED))
- return;
-
- apicid = mpc_apic_id(m, translation_table[mpc_record]);
-
- if (m->mpc_featureflag&(1<<0))
- Dprintk(" Floating point unit present.\n");
- if (m->mpc_featureflag&(1<<7))
- Dprintk(" Machine Exception supported.\n");
- if (m->mpc_featureflag&(1<<8))
- Dprintk(" 64 bit compare & exchange supported.\n");
- if (m->mpc_featureflag&(1<<9))
- Dprintk(" Internal APIC present.\n");
- if (m->mpc_featureflag&(1<<11))
- Dprintk(" SEP present.\n");
- if (m->mpc_featureflag&(1<<12))
- Dprintk(" MTRR present.\n");
- if (m->mpc_featureflag&(1<<13))
- Dprintk(" PGE present.\n");
- if (m->mpc_featureflag&(1<<14))
- Dprintk(" MCA present.\n");
- if (m->mpc_featureflag&(1<<15))
- Dprintk(" CMOV present.\n");
- if (m->mpc_featureflag&(1<<16))
- Dprintk(" PAT present.\n");
- if (m->mpc_featureflag&(1<<17))
- Dprintk(" PSE present.\n");
- if (m->mpc_featureflag&(1<<18))
- Dprintk(" PSN present.\n");
- if (m->mpc_featureflag&(1<<19))
- Dprintk(" Cache Line Flush Instruction present.\n");
- /* 20 Reserved */
- if (m->mpc_featureflag&(1<<21))
- Dprintk(" Debug Trace and EMON Store present.\n");
- if (m->mpc_featureflag&(1<<22))
- Dprintk(" ACPI Thermal Throttle Registers present.\n");
- if (m->mpc_featureflag&(1<<23))
- Dprintk(" MMX present.\n");
- if (m->mpc_featureflag&(1<<24))
- Dprintk(" FXSR present.\n");
- if (m->mpc_featureflag&(1<<25))
- Dprintk(" XMM present.\n");
- if (m->mpc_featureflag&(1<<26))
- Dprintk(" Willamette New Instructions present.\n");
- if (m->mpc_featureflag&(1<<27))
- Dprintk(" Self Snoop present.\n");
- if (m->mpc_featureflag&(1<<28))
- Dprintk(" HT present.\n");
- if (m->mpc_featureflag&(1<<29))
- Dprintk(" Thermal Monitor present.\n");
- /* 30, 31 Reserved */
-
-
- if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- Dprintk(" Bootup CPU\n");
- boot_cpu_physical_apicid = m->mpc_apicid;
- }
-
- ver = m->mpc_apicver;
-
- /*
- * Validate version
- */
- if (ver == 0x0) {
- printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
- "fixing up to 0x10. (tell your hw vendor)\n",
- m->mpc_apicid);
- ver = 0x10;
- }
- apic_version[m->mpc_apicid] = ver;
-
- phys_cpu = apicid_to_cpu_present(apicid);
- physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
- if (num_processors >= NR_CPUS) {
- printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
- " Processor ignored.\n", NR_CPUS);
- return;
- }
-
- if (num_processors >= maxcpus) {
- printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
- " Processor ignored.\n", maxcpus);
- return;
- }
-
- cpu_set(num_processors, cpu_possible_map);
- num_processors++;
-
- /*
- * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
- * but we need to work other dependencies like SMP_SUSPEND etc
- * before this can be done without some confusion.
- * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
- * - Ashok Raj <ashok.raj@intel.com>
- */
- if (num_processors > 8) {
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (!APIC_XAPIC(ver)) {
- def_to_bigsmp = 0;
- break;
- }
- /* If P4 and above fall through */
- case X86_VENDOR_AMD:
- def_to_bigsmp = 1;
- }
- }
- bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
-}
-
-static void __init MP_bus_info (struct mpc_config_bus *m)
-{
- char str[7];
-
- memcpy(str, m->mpc_bustype, 6);
- str[6] = 0;
-
- mpc_oem_bus_info(m, str, translation_table[mpc_record]);
-
-#if MAX_MP_BUSSES < 256
- if (m->mpc_busid >= MAX_MP_BUSSES) {
- printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
- " is too large, max. supported is %d\n",
- m->mpc_busid, str, MAX_MP_BUSSES - 1);
- return;
- }
-#endif
-
- if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
- } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
- } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) {
- mpc_oem_pci_bus(m, translation_table[mpc_record]);
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
- mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
- mp_current_pci_id++;
- } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
- } else {
- printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
- }
-}
-
-static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
-{
- if (!(m->mpc_flags & MPC_APIC_USABLE))
- return;
-
- printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
- m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n",
- MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!.\n");
- }
- if (!m->mpc_apicaddr) {
- printk(KERN_ERR "WARNING: bogus zero I/O APIC address"
- " found in MP table, skipping!\n");
- return;
- }
- mp_ioapics[nr_ioapics] = *m;
- nr_ioapics++;
-}
-
-static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
-{
- mp_irqs [mp_irq_entries] = *m;
- Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
- " IRQ %02x, APIC ID %x, APIC INT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
- m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!!\n");
-}
-
-static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
-{
- Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
- " IRQ %02x, APIC ID %x, APIC LINT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
- m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
-}
-
-#ifdef CONFIG_X86_NUMAQ
-static void __init MP_translation_info (struct mpc_config_translation *m)
-{
- printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
-
- if (mpc_record >= MAX_MPC_ENTRY)
- printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
- else
- translation_table[mpc_record] = m; /* stash this for later */
- if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
- node_set_online(m->trans_quad);
-}
-
-/*
- * Read/parse the MPC oem tables
- */
-
-static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \
- unsigned short oemsize)
-{
- int count = sizeof (*oemtable); /* the header size */
- unsigned char *oemptr = ((unsigned char *)oemtable)+count;
-
- mpc_record = 0;
- printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
- if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4))
- {
- printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
- oemtable->oem_signature[0],
- oemtable->oem_signature[1],
- oemtable->oem_signature[2],
- oemtable->oem_signature[3]);
- return;
- }
- if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length))
- {
- printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
- return;
- }
- while (count < oemtable->oem_length) {
- switch (*oemptr) {
- case MP_TRANSLATION:
- {
- struct mpc_config_translation *m=
- (struct mpc_config_translation *)oemptr;
- MP_translation_info(m);
- oemptr += sizeof(*m);
- count += sizeof(*m);
- ++mpc_record;
- break;
- }
- default:
- {
- printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr);
- return;
- }
- }
- }
-}
-
-static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid)
-{
- if (strncmp(oem, "IBM NUMA", 8))
- printk("Warning! May not be a NUMA-Q system!\n");
- if (mpc->mpc_oemptr)
- smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr,
- mpc->mpc_oemsize);
-}
-#endif /* CONFIG_X86_NUMAQ */
-
-/*
- * Read/parse the MPC
- */
-
-static int __init smp_read_mpc(struct mp_config_table *mpc)
-{
- char str[16];
- char oem[10];
- int count=sizeof(*mpc);
- unsigned char *mpt=((unsigned char *)mpc)+count;
-
- if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
- printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n",
- *(u32 *)mpc->mpc_signature);
- return 0;
- }
- if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
- printk(KERN_ERR "SMP mptable: checksum error!\n");
- return 0;
- }
- if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
- printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n",
- mpc->mpc_spec);
- return 0;
- }
- if (!mpc->mpc_lapic) {
- printk(KERN_ERR "SMP mptable: null local APIC address!\n");
- return 0;
- }
- memcpy(oem,mpc->mpc_oem,8);
- oem[8]=0;
- printk(KERN_INFO "OEM ID: %s ",oem);
-
- memcpy(str,mpc->mpc_productid,12);
- str[12]=0;
- printk("Product ID: %s ",str);
-
- mps_oem_check(mpc, oem, str);
-
- printk("APIC at: 0x%X\n", mpc->mpc_lapic);
-
- /*
- * Save the local APIC address (it might be non-default) -- but only
- * if we're not using ACPI.
- */
- if (!acpi_lapic)
- mp_lapic_addr = mpc->mpc_lapic;
-
- /*
- * Now process the configuration blocks.
- */
- mpc_record = 0;
- while (count < mpc->mpc_length) {
- switch(*mpt) {
- case MP_PROCESSOR:
- {
- struct mpc_config_processor *m=
- (struct mpc_config_processor *)mpt;
- /* ACPI may have already provided this data */
- if (!acpi_lapic)
- MP_processor_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_BUS:
- {
- struct mpc_config_bus *m=
- (struct mpc_config_bus *)mpt;
- MP_bus_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_IOAPIC:
- {
- struct mpc_config_ioapic *m=
- (struct mpc_config_ioapic *)mpt;
- MP_ioapic_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
- break;
- }
- case MP_INTSRC:
- {
- struct mpc_config_intsrc *m=
- (struct mpc_config_intsrc *)mpt;
-
- MP_intsrc_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
- break;
- }
- case MP_LINTSRC:
- {
- struct mpc_config_lintsrc *m=
- (struct mpc_config_lintsrc *)mpt;
- MP_lintsrc_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
- break;
- }
- default:
- {
- count = mpc->mpc_length;
- break;
- }
- }
- ++mpc_record;
- }
- setup_apic_routing();
- if (!num_processors)
- printk(KERN_ERR "SMP mptable: no processors registered!\n");
- return num_processors;
-}
-
-static int __init ELCR_trigger(unsigned int irq)
-{
- unsigned int port;
-
- port = 0x4d0 + (irq >> 3);
- return (inb(port) >> (irq & 7)) & 1;
-}
-
-static void __init construct_default_ioirq_mptable(int mpc_default_type)
-{
- struct mpc_config_intsrc intsrc;
- int i;
- int ELCR_fallback = 0;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* conforming */
- intsrc.mpc_srcbus = 0;
- intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
-
- intsrc.mpc_irqtype = mp_INT;
-
- /*
- * If true, we have an ISA/PCI system with no IRQ entries
- * in the MP table. To prevent the PCI interrupts from being set up
- * incorrectly, we try to use the ELCR. The sanity check to see if
- * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
- * never be level sensitive, so we simply see if the ELCR agrees.
- * If it does, we assume it's valid.
- */
- if (mpc_default_type == 5) {
- printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
-
- if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
- printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n");
- else {
- printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
- ELCR_fallback = 1;
- }
- }
-
- for (i = 0; i < 16; i++) {
- switch (mpc_default_type) {
- case 2:
- if (i == 0 || i == 13)
- continue; /* IRQ0 & IRQ13 not connected */
- /* fall through */
- default:
- if (i == 2)
- continue; /* IRQ2 is never connected */
- }
-
- if (ELCR_fallback) {
- /*
- * If the ELCR indicates a level-sensitive interrupt, we
- * copy that information over to the MP table in the
- * irqflag field (level sensitive, active high polarity).
- */
- if (ELCR_trigger(i))
- intsrc.mpc_irqflag = 13;
- else
- intsrc.mpc_irqflag = 0;
- }
-
- intsrc.mpc_srcbusirq = i;
- intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
- MP_intsrc_info(&intsrc);
- }
-
- intsrc.mpc_irqtype = mp_ExtINT;
- intsrc.mpc_srcbusirq = 0;
- intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
- MP_intsrc_info(&intsrc);
-}
-
-static inline void __init construct_default_ISA_mptable(int mpc_default_type)
-{
- struct mpc_config_processor processor;
- struct mpc_config_bus bus;
- struct mpc_config_ioapic ioapic;
- struct mpc_config_lintsrc lintsrc;
- int linttypes[2] = { mp_ExtINT, mp_NMI };
- int i;
-
- /*
- * local APIC has default address
- */
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
- /*
- * 2 CPUs, numbered 0 & 1.
- */
- processor.mpc_type = MP_PROCESSOR;
- /* Either an integrated APIC or a discrete 82489DX. */
- processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
- processor.mpc_cpuflag = CPU_ENABLED;
- processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) |
- boot_cpu_data.x86_mask;
- processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
- processor.mpc_reserved[0] = 0;
- processor.mpc_reserved[1] = 0;
- for (i = 0; i < 2; i++) {
- processor.mpc_apicid = i;
- MP_processor_info(&processor);
- }
-
- bus.mpc_type = MP_BUS;
- bus.mpc_busid = 0;
- switch (mpc_default_type) {
- default:
- printk("???\n");
- printk(KERN_ERR "Unknown standard configuration %d\n",
- mpc_default_type);
- /* fall through */
- case 1:
- case 5:
- memcpy(bus.mpc_bustype, "ISA ", 6);
- break;
- case 2:
- case 6:
- case 3:
- memcpy(bus.mpc_bustype, "EISA ", 6);
- break;
- case 4:
- case 7:
- memcpy(bus.mpc_bustype, "MCA ", 6);
- }
- MP_bus_info(&bus);
- if (mpc_default_type > 4) {
- bus.mpc_busid = 1;
- memcpy(bus.mpc_bustype, "PCI ", 6);
- MP_bus_info(&bus);
- }
-
- ioapic.mpc_type = MP_IOAPIC;
- ioapic.mpc_apicid = 2;
- ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
- ioapic.mpc_flags = MPC_APIC_USABLE;
- ioapic.mpc_apicaddr = 0xFEC00000;
- MP_ioapic_info(&ioapic);
-
- /*
- * We set up most of the low 16 IO-APIC pins according to MPS rules.
- */
- construct_default_ioirq_mptable(mpc_default_type);
-
- lintsrc.mpc_type = MP_LINTSRC;
- lintsrc.mpc_irqflag = 0; /* conforming */
- lintsrc.mpc_srcbusid = 0;
- lintsrc.mpc_srcbusirq = 0;
- lintsrc.mpc_destapic = MP_APIC_ALL;
- for (i = 0; i < 2; i++) {
- lintsrc.mpc_irqtype = linttypes[i];
- lintsrc.mpc_destapiclint = i;
- MP_lintsrc_info(&lintsrc);
- }
-}
-
-static struct intel_mp_floating *mpf_found;
-
-/*
- * Scan the memory blocks for an SMP configuration block.
- */
-void __init get_smp_config (void)
-{
- struct intel_mp_floating *mpf = mpf_found;
-
- /*
- * ACPI supports both logical (e.g. Hyper-Threading) and physical
- * processors, where MPS only supports physical.
- */
- if (acpi_lapic && acpi_ioapic) {
- printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
- return;
- }
- else if (acpi_lapic)
- printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
-
- printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
- if (mpf->mpf_feature2 & (1<<7)) {
- printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
- pic_mode = 1;
- } else {
- printk(KERN_INFO " Virtual Wire compatibility mode.\n");
- pic_mode = 0;
- }
-
- /*
- * Now see if we need to read further.
- */
- if (mpf->mpf_feature1 != 0) {
-
- printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
- construct_default_ISA_mptable(mpf->mpf_feature1);
-
- } else if (mpf->mpf_physptr) {
-
- /*
- * Read the physical hardware table. Anything here will
- * override the defaults.
- */
- if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
- smp_found_config = 0;
- printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
- printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
- return;
- }
- /*
- * If there are no explicit MP IRQ entries, then we are
- * broken. We set up most of the low 16 IO-APIC pins to
- * ISA defaults and hope it will work.
- */
- if (!mp_irq_entries) {
- struct mpc_config_bus bus;
-
- printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
-
- bus.mpc_type = MP_BUS;
- bus.mpc_busid = 0;
- memcpy(bus.mpc_bustype, "ISA ", 6);
- MP_bus_info(&bus);
-
- construct_default_ioirq_mptable(0);
- }
-
- } else
- BUG();
-
- printk(KERN_INFO "Processors: %d\n", num_processors);
- /*
- * Only use the first configuration found.
- */
-}
-
-static int __init smp_scan_config (unsigned long base, unsigned long length)
-{
- unsigned long *bp = phys_to_virt(base);
- struct intel_mp_floating *mpf;
-
- printk(KERN_INFO "Scan SMP from %p for %ld bytes.\n", bp,length);
- if (sizeof(*mpf) != 16)
- printk("Error: MPF size\n");
-
- while (length > 0) {
- mpf = (struct intel_mp_floating *)bp;
- if ((*bp == SMP_MAGIC_IDENT) &&
- (mpf->mpf_length == 1) &&
- !mpf_checksum((unsigned char *)bp, 16) &&
- ((mpf->mpf_specification == 1)
- || (mpf->mpf_specification == 4)) ) {
-
- smp_found_config = 1;
- printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
- mpf, virt_to_phys(mpf));
- reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE,
- BOOTMEM_DEFAULT);
- if (mpf->mpf_physptr) {
- /*
- * We cannot access to MPC table to compute
- * table size yet, as only few megabytes from
- * the bottom is mapped now.
- * PC-9800's MPC table places on the very last
- * of physical memory; so that simply reserving
- * PAGE_SIZE from mpg->mpf_physptr yields BUG()
- * in reserve_bootmem.
- */
- unsigned long size = PAGE_SIZE;
- unsigned long end = max_low_pfn * PAGE_SIZE;
- if (mpf->mpf_physptr + size > end)
- size = end - mpf->mpf_physptr;
- reserve_bootmem(mpf->mpf_physptr, size,
- BOOTMEM_DEFAULT);
- }
-
- mpf_found = mpf;
- return 1;
- }
- bp += 4;
- length -= 16;
- }
- return 0;
-}
-
-void __init find_smp_config (void)
-{
- unsigned int address;
-
- /*
- * FIXME: Linux assumes you have 640K of base ram..
- * this continues the error...
- *
- * 1) Scan the bottom 1K for a signature
- * 2) Scan the top 1K of base RAM
- * 3) Scan the 64K of bios
- */
- if (smp_scan_config(0x0,0x400) ||
- smp_scan_config(639*0x400,0x400) ||
- smp_scan_config(0xF0000,0x10000))
- return;
- /*
- * If it is an SMP machine we should know now, unless the
- * configuration is in an EISA/MCA bus machine with an
- * extended bios data area.
- *
- * there is a real-mode segmented pointer pointing to the
- * 4K EBDA area at 0x40E, calculate and scan it here.
- *
- * NOTE! There are Linux loaders that will corrupt the EBDA
- * area, and as such this kind of SMP config may be less
- * trustworthy, simply because the SMP table may have been
- * stomped on during early boot. These loaders are buggy and
- * should be fixed.
- *
- * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
- */
-
- address = get_bios_ebda();
- if (address)
- smp_scan_config(address, 0x400);
-}
-
-int es7000_plat;
-
-/* --------------------------------------------------------------------------
- ACPI-based MP Configuration
- -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-void __init mp_register_lapic_address(u64 address)
-{
- mp_lapic_addr = (unsigned long) address;
-
- set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
-
- if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
-
- Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
-}
-
-void __cpuinit mp_register_lapic (u8 id, u8 enabled)
-{
- struct mpc_config_processor processor;
- int boot_cpu = 0;
-
- if (MAX_APICS - id <= 0) {
- printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
- id, MAX_APICS);
- return;
- }
-
- if (id == boot_cpu_physical_apicid)
- boot_cpu = 1;
-
- processor.mpc_type = MP_PROCESSOR;
- processor.mpc_apicid = id;
- processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR));
- processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
- processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
- processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
- processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
- processor.mpc_reserved[0] = 0;
- processor.mpc_reserved[1] = 0;
-
- MP_processor_info(&processor);
-}
-
-#ifdef CONFIG_X86_IO_APIC
-
-#define MP_ISA_BUS 0
-#define MP_MAX_IOAPIC_PIN 127
-
-static struct mp_ioapic_routing {
- int apic_id;
- int gsi_base;
- int gsi_end;
- u32 pin_programmed[4];
-} mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic (int gsi)
-{
- int i = 0;
-
- /* Find the IOAPIC that manages this GSI. */
- for (i = 0; i < nr_ioapics; i++) {
- if ((gsi >= mp_ioapic_routing[i].gsi_base)
- && (gsi <= mp_ioapic_routing[i].gsi_end))
- return i;
- }
-
- printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-
- return -1;
-}
-
-void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
-{
- int idx = 0;
- int tmpid;
-
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
- "(found %d)\n", MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!\n");
- }
- if (!address) {
- printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
- " found in MADT table, skipping!\n");
- return;
- }
-
- idx = nr_ioapics++;
-
- mp_ioapics[idx].mpc_type = MP_IOAPIC;
- mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
- mp_ioapics[idx].mpc_apicaddr = address;
-
- set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
- && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
- tmpid = io_apic_get_unique_id(idx, id);
- else
- tmpid = id;
- if (tmpid == -1) {
- nr_ioapics--;
- return;
- }
- mp_ioapics[idx].mpc_apicid = tmpid;
- mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
-
- /*
- * Build basic GSI lookup table to facilitate gsi->io_apic lookups
- * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
- */
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
- mp_ioapic_routing[idx].gsi_base = gsi_base;
- mp_ioapic_routing[idx].gsi_end = gsi_base +
- io_apic_get_redir_entries(idx);
-
- printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
- "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
- mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
- mp_ioapic_routing[idx].gsi_base,
- mp_ioapic_routing[idx].gsi_end);
-}
-
-void __init
-mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
-{
- struct mpc_config_intsrc intsrc;
- int ioapic = -1;
- int pin = -1;
-
- /*
- * Convert 'gsi' to 'ioapic.pin'.
- */
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0)
- return;
- pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
-
- /*
- * TBD: This check is for faulty timer entries, where the override
- * erroneously sets the trigger to level, resulting in a HUGE
- * increase of timer interrupts!
- */
- if ((bus_irq == 0) && (trigger == 3))
- trigger = 1;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_irqflag = (trigger << 2) | polarity;
- intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
- intsrc.mpc_dstirq = pin; /* INTIN# */
-
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
- intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
- intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
-
- mp_irqs[mp_irq_entries] = intsrc;
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!\n");
-}
-
-void __init mp_config_acpi_legacy_irqs (void)
-{
- struct mpc_config_intsrc intsrc;
- int i = 0;
- int ioapic = -1;
-
- /*
- * Fabricate the legacy ISA bus (bus #31).
- */
- mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
- Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
-
- /*
- * Older generations of ES7000 have no legacy identity mappings
- */
- if (es7000_plat == 1)
- return;
-
- /*
- * Locate the IOAPIC that manages the ISA IRQs (0-15).
- */
- ioapic = mp_find_ioapic(0);
- if (ioapic < 0)
- return;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* Conforming */
- intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
-
- /*
- * Use the default configuration for the IRQs 0-15. Unless
- * overridden by (MADT) interrupt source override entries.
- */
- for (i = 0; i < 16; i++) {
- int idx;
-
- for (idx = 0; idx < mp_irq_entries; idx++) {
- struct mpc_config_intsrc *irq = mp_irqs + idx;
-
- /* Do we already have a mapping for this ISA IRQ? */
- if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
- break;
-
- /* Do we already have a mapping for this IOAPIC pin */
- if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
- (irq->mpc_dstirq == i))
- break;
- }
-
- if (idx != mp_irq_entries) {
- printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
- continue; /* IRQ already used */
- }
-
- intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_srcbusirq = i; /* Identity mapped */
- intsrc.mpc_dstirq = i;
-
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
- "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
- intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
- intsrc.mpc_dstirq);
-
- mp_irqs[mp_irq_entries] = intsrc;
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!\n");
- }
-}
-
-#define MAX_GSI_NUM 4096
-#define IRQ_COMPRESSION_START 64
-
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
-{
- int ioapic = -1;
- int ioapic_pin = 0;
- int idx, bit = 0;
- static int pci_irq = IRQ_COMPRESSION_START;
- /*
- * Mapping between Global System Interrupts, which
- * represent all possible interrupts, and IRQs
- * assigned to actual devices.
- */
- static int gsi_to_irq[MAX_GSI_NUM];
-
- /* Don't set up the ACPI SCI because it's already set up */
- if (acpi_gbl_FADT.sci_interrupt == gsi)
- return gsi;
-
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0) {
- printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
- return gsi;
- }
-
- ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
-
- if (ioapic_renumber_irq)
- gsi = ioapic_renumber_irq(ioapic, gsi);
-
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- bit = ioapic_pin % 32;
- idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
- if (idx > 3) {
- printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
- ioapic_pin);
- return gsi;
- }
- if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
- Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
- }
-
- mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
-
- /*
- * For GSI >= 64, use IRQ compression
- */
- if ((gsi >= IRQ_COMPRESSION_START)
- && (triggering == ACPI_LEVEL_SENSITIVE)) {
- /*
- * For PCI devices assign IRQs in order, avoiding gaps
- * due to unused I/O APIC pins.
- */
- int irq = gsi;
- if (gsi < MAX_GSI_NUM) {
- /*
- * Retain the VIA chipset work-around (gsi > 15), but
- * avoid a problem where the 8254 timer (IRQ0) is setup
- * via an override (so it's not on pin 0 of the ioapic),
- * and at the same time, the pin 0 interrupt is a PCI
- * type. The gsi > 15 test could cause these two pins
- * to be shared as IRQ0, and they are not shareable.
- * So test for this condition, and if necessary, avoid
- * the pin collision.
- */
- if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0))
- gsi = pci_irq++;
- /*
- * Don't assign IRQ used by ACPI SCI
- */
- if (gsi == acpi_gbl_FADT.sci_interrupt)
- gsi = pci_irq++;
- gsi_to_irq[irq] = gsi;
- } else {
- printk(KERN_ERR "GSI %u is too high\n", gsi);
- return gsi;
- }
- }
-
- io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- return gsi;
-}
-
-#endif /* CONFIG_X86_IO_APIC */
-#endif /* CONFIG_ACPI */
diff --git a/arch/x86/kernel/mpparse_64.c b/arch/x86/kernel/mpparse_64.c
deleted file mode 100644
index 72ab140..0000000
--- a/arch/x86/kernel/mpparse_64.c
+++ /dev/null
@@ -1,867 +0,0 @@
-/*
- * Intel Multiprocessor Specification 1.1 and 1.4
- * compliant MP-table parsing routines.
- *
- * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- * Fixes
- * Erich Boleyn : MP v1.4 and additional changes.
- * Alan Cox : Added EBDA scanning
- * Ingo Molnar : various cleanups and rewrites
- * Maciej W. Rozycki: Bits for default MP configurations
- * Paul Diefenbaugh: Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/acpi.h>
-#include <linux/module.h>
-
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/pgalloc.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/acpi.h>
-
-/* Have we found an MP table */
-int smp_found_config;
-
-/*
- * Various Linux-internal data structures created from the
- * MP-table.
- */
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
-
-static int mp_current_pci_id = 0;
-/* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
-
-/* # of MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
-
-/* MP IRQ source entries */
-int mp_irq_entries;
-
-int nr_ioapics;
-unsigned long mp_lapic_addr = 0;
-
-
-
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_id = -1U;
-EXPORT_SYMBOL(boot_cpu_id);
-
-/* Internal processor count */
-unsigned int num_processors;
-
-unsigned disabled_cpus __cpuinitdata;
-
-/* Bitmask of physically existing CPUs */
-physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
-
-u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
- = { [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_bios_cpu_apicid_early_ptr;
-DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-
-
-/*
- * Intel MP BIOS table parsing routines:
- */
-
-/*
- * Checksum an MP configuration block.
- */
-
-static int __init mpf_checksum(unsigned char *mp, int len)
-{
- int sum = 0;
-
- while (len--)
- sum += *mp++;
-
- return sum & 0xFF;
-}
-
-static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
-{
- int cpu;
- cpumask_t tmp_map;
- char *bootup_cpu = "";
-
- if (!(m->mpc_cpuflag & CPU_ENABLED)) {
- disabled_cpus++;
- return;
- }
- if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- bootup_cpu = " (Bootup-CPU)";
- boot_cpu_id = m->mpc_apicid;
- }
-
- printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
-
- if (num_processors >= NR_CPUS) {
- printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
- " Processor ignored.\n", NR_CPUS);
- return;
- }
-
- num_processors++;
- cpus_complement(tmp_map, cpu_present_map);
- cpu = first_cpu(tmp_map);
-
- physid_set(m->mpc_apicid, phys_cpu_present_map);
- if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- /*
- * x86_bios_cpu_apicid is required to have processors listed
- * in same order as logical cpu numbers. Hence the first
- * entry is BSP, and so on.
- */
- cpu = 0;
- }
- /* are we being called early in kernel startup? */
- if (x86_cpu_to_apicid_early_ptr) {
- u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
- u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
-
- cpu_to_apicid[cpu] = m->mpc_apicid;
- bios_cpu_apicid[cpu] = m->mpc_apicid;
- } else {
- per_cpu(x86_cpu_to_apicid, cpu) = m->mpc_apicid;
- per_cpu(x86_bios_cpu_apicid, cpu) = m->mpc_apicid;
- }
-
- cpu_set(cpu, cpu_possible_map);
- cpu_set(cpu, cpu_present_map);
-}
-
-static void __init MP_bus_info (struct mpc_config_bus *m)
-{
- char str[7];
-
- memcpy(str, m->mpc_bustype, 6);
- str[6] = 0;
- Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
-
- if (strncmp(str, "ISA", 3) == 0) {
- set_bit(m->mpc_busid, mp_bus_not_pci);
- } else if (strncmp(str, "PCI", 3) == 0) {
- clear_bit(m->mpc_busid, mp_bus_not_pci);
- mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
- mp_current_pci_id++;
- } else {
- printk(KERN_ERR "Unknown bustype %s\n", str);
- }
-}
-
-static int bad_ioapic(unsigned long address)
-{
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
- "(found %d)\n", MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!\n");
- }
- if (!address) {
- printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
- " found in table, skipping!\n");
- return 1;
- }
- return 0;
-}
-
-static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
-{
- if (!(m->mpc_flags & MPC_APIC_USABLE))
- return;
-
- printk("I/O APIC #%d at 0x%X.\n",
- m->mpc_apicid, m->mpc_apicaddr);
-
- if (bad_ioapic(m->mpc_apicaddr))
- return;
-
- mp_ioapics[nr_ioapics] = *m;
- nr_ioapics++;
-}
-
-static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
-{
- mp_irqs [mp_irq_entries] = *m;
- Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
- " IRQ %02x, APIC ID %x, APIC INT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
- m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
- if (++mp_irq_entries >= MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!!\n");
-}
-
-static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
-{
- Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
- " IRQ %02x, APIC ID %x, APIC LINT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
- m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
-}
-
-/*
- * Read/parse the MPC
- */
-
-static int __init smp_read_mpc(struct mp_config_table *mpc)
-{
- char str[16];
- int count=sizeof(*mpc);
- unsigned char *mpt=((unsigned char *)mpc)+count;
-
- if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
- printk("MPTABLE: bad signature [%c%c%c%c]!\n",
- mpc->mpc_signature[0],
- mpc->mpc_signature[1],
- mpc->mpc_signature[2],
- mpc->mpc_signature[3]);
- return 0;
- }
- if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
- printk("MPTABLE: checksum error!\n");
- return 0;
- }
- if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
- printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
- mpc->mpc_spec);
- return 0;
- }
- if (!mpc->mpc_lapic) {
- printk(KERN_ERR "MPTABLE: null local APIC address!\n");
- return 0;
- }
- memcpy(str,mpc->mpc_oem,8);
- str[8] = 0;
- printk(KERN_INFO "MPTABLE: OEM ID: %s ",str);
-
- memcpy(str,mpc->mpc_productid,12);
- str[12] = 0;
- printk("MPTABLE: Product ID: %s ",str);
-
- printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic);
-
- /* save the local APIC address, it might be non-default */
- if (!acpi_lapic)
- mp_lapic_addr = mpc->mpc_lapic;
-
- /*
- * Now process the configuration blocks.
- */
- while (count < mpc->mpc_length) {
- switch(*mpt) {
- case MP_PROCESSOR:
- {
- struct mpc_config_processor *m=
- (struct mpc_config_processor *)mpt;
- if (!acpi_lapic)
- MP_processor_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_BUS:
- {
- struct mpc_config_bus *m=
- (struct mpc_config_bus *)mpt;
- MP_bus_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_IOAPIC:
- {
- struct mpc_config_ioapic *m=
- (struct mpc_config_ioapic *)mpt;
- MP_ioapic_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_INTSRC:
- {
- struct mpc_config_intsrc *m=
- (struct mpc_config_intsrc *)mpt;
-
- MP_intsrc_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_LINTSRC:
- {
- struct mpc_config_lintsrc *m=
- (struct mpc_config_lintsrc *)mpt;
- MP_lintsrc_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- }
- }
- setup_apic_routing();
- if (!num_processors)
- printk(KERN_ERR "MPTABLE: no processors registered!\n");
- return num_processors;
-}
-
-static int __init ELCR_trigger(unsigned int irq)
-{
- unsigned int port;
-
- port = 0x4d0 + (irq >> 3);
- return (inb(port) >> (irq & 7)) & 1;
-}
-
-static void __init construct_default_ioirq_mptable(int mpc_default_type)
-{
- struct mpc_config_intsrc intsrc;
- int i;
- int ELCR_fallback = 0;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* conforming */
- intsrc.mpc_srcbus = 0;
- intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
-
- intsrc.mpc_irqtype = mp_INT;
-
- /*
- * If true, we have an ISA/PCI system with no IRQ entries
- * in the MP table. To prevent the PCI interrupts from being set up
- * incorrectly, we try to use the ELCR. The sanity check to see if
- * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
- * never be level sensitive, so we simply see if the ELCR agrees.
- * If it does, we assume it's valid.
- */
- if (mpc_default_type == 5) {
- printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
-
- if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
- printk(KERN_ERR "ELCR contains invalid data... not using ELCR\n");
- else {
- printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
- ELCR_fallback = 1;
- }
- }
-
- for (i = 0; i < 16; i++) {
- switch (mpc_default_type) {
- case 2:
- if (i == 0 || i == 13)
- continue; /* IRQ0 & IRQ13 not connected */
- /* fall through */
- default:
- if (i == 2)
- continue; /* IRQ2 is never connected */
- }
-
- if (ELCR_fallback) {
- /*
- * If the ELCR indicates a level-sensitive interrupt, we
- * copy that information over to the MP table in the
- * irqflag field (level sensitive, active high polarity).
- */
- if (ELCR_trigger(i))
- intsrc.mpc_irqflag = 13;
- else
- intsrc.mpc_irqflag = 0;
- }
-
- intsrc.mpc_srcbusirq = i;
- intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
- MP_intsrc_info(&intsrc);
- }
-
- intsrc.mpc_irqtype = mp_ExtINT;
- intsrc.mpc_srcbusirq = 0;
- intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
- MP_intsrc_info(&intsrc);
-}
-
-static inline void __init construct_default_ISA_mptable(int mpc_default_type)
-{
- struct mpc_config_processor processor;
- struct mpc_config_bus bus;
- struct mpc_config_ioapic ioapic;
- struct mpc_config_lintsrc lintsrc;
- int linttypes[2] = { mp_ExtINT, mp_NMI };
- int i;
-
- /*
- * local APIC has default address
- */
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
- /*
- * 2 CPUs, numbered 0 & 1.
- */
- processor.mpc_type = MP_PROCESSOR;
- processor.mpc_apicver = 0;
- processor.mpc_cpuflag = CPU_ENABLED;
- processor.mpc_cpufeature = 0;
- processor.mpc_featureflag = 0;
- processor.mpc_reserved[0] = 0;
- processor.mpc_reserved[1] = 0;
- for (i = 0; i < 2; i++) {
- processor.mpc_apicid = i;
- MP_processor_info(&processor);
- }
-
- bus.mpc_type = MP_BUS;
- bus.mpc_busid = 0;
- switch (mpc_default_type) {
- default:
- printk(KERN_ERR "???\nUnknown standard configuration %d\n",
- mpc_default_type);
- /* fall through */
- case 1:
- case 5:
- memcpy(bus.mpc_bustype, "ISA ", 6);
- break;
- }
- MP_bus_info(&bus);
- if (mpc_default_type > 4) {
- bus.mpc_busid = 1;
- memcpy(bus.mpc_bustype, "PCI ", 6);
- MP_bus_info(&bus);
- }
-
- ioapic.mpc_type = MP_IOAPIC;
- ioapic.mpc_apicid = 2;
- ioapic.mpc_apicver = 0;
- ioapic.mpc_flags = MPC_APIC_USABLE;
- ioapic.mpc_apicaddr = 0xFEC00000;
- MP_ioapic_info(&ioapic);
-
- /*
- * We set up most of the low 16 IO-APIC pins according to MPS rules.
- */
- construct_default_ioirq_mptable(mpc_default_type);
-
- lintsrc.mpc_type = MP_LINTSRC;
- lintsrc.mpc_irqflag = 0; /* conforming */
- lintsrc.mpc_srcbusid = 0;
- lintsrc.mpc_srcbusirq = 0;
- lintsrc.mpc_destapic = MP_APIC_ALL;
- for (i = 0; i < 2; i++) {
- lintsrc.mpc_irqtype = linttypes[i];
- lintsrc.mpc_destapiclint = i;
- MP_lintsrc_info(&lintsrc);
- }
-}
-
-static struct intel_mp_floating *mpf_found;
-
-/*
- * Scan the memory blocks for an SMP configuration block.
- */
-void __init get_smp_config (void)
-{
- struct intel_mp_floating *mpf = mpf_found;
-
- /*
- * ACPI supports both logical (e.g. Hyper-Threading) and physical
- * processors, where MPS only supports physical.
- */
- if (acpi_lapic && acpi_ioapic) {
- printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
- return;
- }
- else if (acpi_lapic)
- printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
-
- printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
-
- /*
- * Now see if we need to read further.
- */
- if (mpf->mpf_feature1 != 0) {
-
- printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
- construct_default_ISA_mptable(mpf->mpf_feature1);
-
- } else if (mpf->mpf_physptr) {
-
- /*
- * Read the physical hardware table. Anything here will
- * override the defaults.
- */
- if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
- smp_found_config = 0;
- printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
- printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
- return;
- }
- /*
- * If there are no explicit MP IRQ entries, then we are
- * broken. We set up most of the low 16 IO-APIC pins to
- * ISA defaults and hope it will work.
- */
- if (!mp_irq_entries) {
- struct mpc_config_bus bus;
-
- printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
-
- bus.mpc_type = MP_BUS;
- bus.mpc_busid = 0;
- memcpy(bus.mpc_bustype, "ISA ", 6);
- MP_bus_info(&bus);
-
- construct_default_ioirq_mptable(0);
- }
-
- } else
- BUG();
-
- printk(KERN_INFO "Processors: %d\n", num_processors);
- /*
- * Only use the first configuration found.
- */
-}
-
-static int __init smp_scan_config (unsigned long base, unsigned long length)
-{
- extern void __bad_mpf_size(void);
- unsigned int *bp = phys_to_virt(base);
- struct intel_mp_floating *mpf;
-
- Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
- if (sizeof(*mpf) != 16)
- __bad_mpf_size();
-
- while (length > 0) {
- mpf = (struct intel_mp_floating *)bp;
- if ((*bp == SMP_MAGIC_IDENT) &&
- (mpf->mpf_length == 1) &&
- !mpf_checksum((unsigned char *)bp, 16) &&
- ((mpf->mpf_specification == 1)
- || (mpf->mpf_specification == 4)) ) {
-
- smp_found_config = 1;
- reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
- if (mpf->mpf_physptr)
- reserve_bootmem_generic(mpf->mpf_physptr, PAGE_SIZE);
- mpf_found = mpf;
- return 1;
- }
- bp += 4;
- length -= 16;
- }
- return 0;
-}
-
-void __init find_smp_config(void)
-{
- unsigned int address;
-
- /*
- * FIXME: Linux assumes you have 640K of base ram..
- * this continues the error...
- *
- * 1) Scan the bottom 1K for a signature
- * 2) Scan the top 1K of base RAM
- * 3) Scan the 64K of bios
- */
- if (smp_scan_config(0x0,0x400) ||
- smp_scan_config(639*0x400,0x400) ||
- smp_scan_config(0xF0000,0x10000))
- return;
- /*
- * If it is an SMP machine we should know now.
- *
- * there is a real-mode segmented pointer pointing to the
- * 4K EBDA area at 0x40E, calculate and scan it here.
- *
- * NOTE! There are Linux loaders that will corrupt the EBDA
- * area, and as such this kind of SMP config may be less
- * trustworthy, simply because the SMP table may have been
- * stomped on during early boot. These loaders are buggy and
- * should be fixed.
- */
-
- address = *(unsigned short *)phys_to_virt(0x40E);
- address <<= 4;
- if (smp_scan_config(address, 0x1000))
- return;
-
- /* If we have come this far, we did not find an MP table */
- printk(KERN_INFO "No mptable found.\n");
-}
-
-/* --------------------------------------------------------------------------
- ACPI-based MP Configuration
- -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-void __init mp_register_lapic_address(u64 address)
-{
- mp_lapic_addr = (unsigned long) address;
- set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
- if (boot_cpu_id == -1U)
- boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
-}
-
-void __cpuinit mp_register_lapic (u8 id, u8 enabled)
-{
- struct mpc_config_processor processor;
- int boot_cpu = 0;
-
- if (id == boot_cpu_id)
- boot_cpu = 1;
-
- processor.mpc_type = MP_PROCESSOR;
- processor.mpc_apicid = id;
- processor.mpc_apicver = 0;
- processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
- processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
- processor.mpc_cpufeature = 0;
- processor.mpc_featureflag = 0;
- processor.mpc_reserved[0] = 0;
- processor.mpc_reserved[1] = 0;
-
- MP_processor_info(&processor);
-}
-
-#define MP_ISA_BUS 0
-#define MP_MAX_IOAPIC_PIN 127
-
-static struct mp_ioapic_routing {
- int apic_id;
- int gsi_start;
- int gsi_end;
- u32 pin_programmed[4];
-} mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic(int gsi)
-{
- int i = 0;
-
- /* Find the IOAPIC that manages this GSI. */
- for (i = 0; i < nr_ioapics; i++) {
- if ((gsi >= mp_ioapic_routing[i].gsi_start)
- && (gsi <= mp_ioapic_routing[i].gsi_end))
- return i;
- }
-
- printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
- return -1;
-}
-
-static u8 uniq_ioapic_id(u8 id)
-{
- int i;
- DECLARE_BITMAP(used, 256);
- bitmap_zero(used, 256);
- for (i = 0; i < nr_ioapics; i++) {
- struct mpc_config_ioapic *ia = &mp_ioapics[i];
- __set_bit(ia->mpc_apicid, used);
- }
- if (!test_bit(id, used))
- return id;
- return find_first_zero_bit(used, 256);
-}
-
-void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
-{
- int idx = 0;
-
- if (bad_ioapic(address))
- return;
-
- idx = nr_ioapics;
-
- mp_ioapics[idx].mpc_type = MP_IOAPIC;
- mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
- mp_ioapics[idx].mpc_apicaddr = address;
-
- set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
- mp_ioapics[idx].mpc_apicver = 0;
-
- /*
- * Build basic IRQ lookup table to facilitate gsi->io_apic lookups
- * and to prevent reprogramming of IOAPIC pins (PCI IRQs).
- */
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
- mp_ioapic_routing[idx].gsi_start = gsi_base;
- mp_ioapic_routing[idx].gsi_end = gsi_base +
- io_apic_get_redir_entries(idx);
-
- printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, "
- "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
- mp_ioapics[idx].mpc_apicaddr,
- mp_ioapic_routing[idx].gsi_start,
- mp_ioapic_routing[idx].gsi_end);
-
- nr_ioapics++;
-}
-
-void __init
-mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
-{
- struct mpc_config_intsrc intsrc;
- int ioapic = -1;
- int pin = -1;
-
- /*
- * Convert 'gsi' to 'ioapic.pin'.
- */
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0)
- return;
- pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
-
- /*
- * TBD: This check is for faulty timer entries, where the override
- * erroneously sets the trigger to level, resulting in a HUGE
- * increase of timer interrupts!
- */
- if ((bus_irq == 0) && (trigger == 3))
- trigger = 1;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_irqflag = (trigger << 2) | polarity;
- intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
- intsrc.mpc_dstirq = pin; /* INTIN# */
-
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
- intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
- intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
-
- mp_irqs[mp_irq_entries] = intsrc;
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!\n");
-}
-
-void __init mp_config_acpi_legacy_irqs(void)
-{
- struct mpc_config_intsrc intsrc;
- int i = 0;
- int ioapic = -1;
-
- /*
- * Fabricate the legacy ISA bus (bus #31).
- */
- set_bit(MP_ISA_BUS, mp_bus_not_pci);
-
- /*
- * Locate the IOAPIC that manages the ISA IRQs (0-15).
- */
- ioapic = mp_find_ioapic(0);
- if (ioapic < 0)
- return;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* Conforming */
- intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
-
- /*
- * Use the default configuration for the IRQs 0-15. Unless
- * overridden by (MADT) interrupt source override entries.
- */
- for (i = 0; i < 16; i++) {
- int idx;
-
- for (idx = 0; idx < mp_irq_entries; idx++) {
- struct mpc_config_intsrc *irq = mp_irqs + idx;
-
- /* Do we already have a mapping for this ISA IRQ? */
- if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
- break;
-
- /* Do we already have a mapping for this IOAPIC pin */
- if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
- (irq->mpc_dstirq == i))
- break;
- }
-
- if (idx != mp_irq_entries) {
- printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
- continue; /* IRQ already used */
- }
-
- intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_srcbusirq = i; /* Identity mapped */
- intsrc.mpc_dstirq = i;
-
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
- "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
- intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
- intsrc.mpc_dstirq);
-
- mp_irqs[mp_irq_entries] = intsrc;
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!\n");
- }
-}
-
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
-{
- int ioapic = -1;
- int ioapic_pin = 0;
- int idx, bit = 0;
-
- if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
- return gsi;
-
- /* Don't set up the ACPI SCI because it's already set up */
- if (acpi_gbl_FADT.sci_interrupt == gsi)
- return gsi;
-
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0) {
- printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
- return gsi;
- }
-
- ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
-
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- bit = ioapic_pin % 32;
- idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
- if (idx > 3) {
- printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
- ioapic_pin);
- return gsi;
- }
- if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
- Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- return gsi;
- }
-
- mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
-
- io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- return gsi;
-}
-#endif /*CONFIG_ACPI*/
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index af51ea8..4dfb405 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -65,8 +65,8 @@
return ret;
}
-static ssize_t msr_read(struct file *file, char __user * buf,
- size_t count, loff_t * ppos)
+static ssize_t msr_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
{
u32 __user *tmp = (u32 __user *) buf;
u32 data[2];
diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c
index 6a0aa70..8421d0a 100644
--- a/arch/x86/kernel/nmi_32.c
+++ b/arch/x86/kernel/nmi_32.c
@@ -22,9 +22,11 @@
#include <linux/cpumask.h>
#include <linux/kernel_stat.h>
#include <linux/kdebug.h>
+#include <linux/slab.h>
#include <asm/smp.h>
#include <asm/nmi.h>
+#include <asm/timer.h>
#include "mach_traps.h"
@@ -67,7 +69,7 @@
}
#endif
-static int __init check_nmi_watchdog(void)
+int __init check_nmi_watchdog(void)
{
unsigned int *prev_nmi_count;
int cpu;
@@ -80,7 +82,7 @@
prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
if (!prev_nmi_count)
- return -1;
+ goto error;
printk(KERN_INFO "Testing NMI watchdog ... ");
@@ -117,7 +119,7 @@
if (!atomic_read(&nmi_active)) {
kfree(prev_nmi_count);
atomic_set(&nmi_active, -1);
- return -1;
+ goto error;
}
printk("OK.\n");
@@ -128,9 +130,11 @@
kfree(prev_nmi_count);
return 0;
+error:
+ timer_ack = !cpu_has_tsc;
+
+ return -1;
}
-/* This needs to happen later in boot so counters are working */
-late_initcall(check_nmi_watchdog);
static int __init setup_nmi_watchdog(char *str)
{
diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c
index 9a4fde7..11f9130 100644
--- a/arch/x86/kernel/nmi_64.c
+++ b/arch/x86/kernel/nmi_64.c
@@ -26,6 +26,8 @@
#include <asm/proto.h>
#include <asm/mce.h>
+#include <mach_traps.h>
+
int unknown_nmi_panic;
int nmi_watchdog_enabled;
int panic_on_unrecovered_nmi;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 075962c..3733412 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -206,13 +206,6 @@
.flags = IORESOURCE_IO | IORESOURCE_BUSY,
};
-static struct resource reserve_iomem = {
- .start = 0,
- .end = -1,
- .name = "paravirt-iomem",
- .flags = IORESOURCE_MEM | IORESOURCE_BUSY,
-};
-
/*
* Reserve the whole legacy IO space to prevent any legacy drivers
* from wasting time probing for their hardware. This is a fairly
@@ -222,16 +215,7 @@
*/
int paravirt_disable_iospace(void)
{
- int ret;
-
- ret = request_resource(&ioport_resource, &reserve_ioports);
- if (ret == 0) {
- ret = request_resource(&iomem_resource, &reserve_iomem);
- if (ret)
- release_resource(&reserve_ioports);
- }
-
- return ret;
+ return request_resource(&ioport_resource, &reserve_ioports);
}
static DEFINE_PER_CPU(enum paravirt_lazy_mode, paravirt_lazy_mode) = PARAVIRT_LAZY_NONE;
diff --git a/arch/x86/kernel/pci-dma_64.c b/arch/x86/kernel/pci-dma_64.c
index 375cb2b..ada5a06 100644
--- a/arch/x86/kernel/pci-dma_64.c
+++ b/arch/x86/kernel/pci-dma_64.c
@@ -232,32 +232,32 @@
return -EINVAL;
while (*p) {
- if (!strncmp(p,"off",3))
+ if (!strncmp(p, "off", 3))
no_iommu = 1;
/* gart_parse_options has more force support */
- if (!strncmp(p,"force",5))
+ if (!strncmp(p, "force", 5))
force_iommu = 1;
- if (!strncmp(p,"noforce",7)) {
+ if (!strncmp(p, "noforce", 7)) {
iommu_merge = 0;
force_iommu = 0;
}
- if (!strncmp(p, "biomerge",8)) {
+ if (!strncmp(p, "biomerge", 8)) {
iommu_bio_merge = 4096;
iommu_merge = 1;
force_iommu = 1;
}
- if (!strncmp(p, "panic",5))
+ if (!strncmp(p, "panic", 5))
panic_on_overflow = 1;
- if (!strncmp(p, "nopanic",7))
+ if (!strncmp(p, "nopanic", 7))
panic_on_overflow = 0;
- if (!strncmp(p, "merge",5)) {
+ if (!strncmp(p, "merge", 5)) {
iommu_merge = 1;
force_iommu = 1;
}
- if (!strncmp(p, "nomerge",7))
+ if (!strncmp(p, "nomerge", 7))
iommu_merge = 0;
- if (!strncmp(p, "forcesac",8))
+ if (!strncmp(p, "forcesac", 8))
iommu_sac_force = 1;
if (!strncmp(p, "allowdac", 8))
forbid_dac = 0;
@@ -265,7 +265,7 @@
forbid_dac = -1;
#ifdef CONFIG_SWIOTLB
- if (!strncmp(p, "soft",4))
+ if (!strncmp(p, "soft", 4))
swiotlb = 1;
#endif
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index faf3229..700e464 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -615,8 +615,8 @@
nommu:
/* Should not happen anymore */
- printk(KERN_ERR "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
- KERN_ERR "PCI-DMA: 32bit PCI IO may malfunction.\n");
+ printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
+ KERN_WARNING "falling back to iommu=soft.\n");
return -1;
}
@@ -692,9 +692,9 @@
!gart_iommu_aperture ||
(no_agp && init_k8_gatt(&info) < 0)) {
if (end_pfn > MAX_DMA32_PFN) {
- printk(KERN_ERR "WARNING more than 4GB of memory "
- "but GART IOMMU not available.\n"
- KERN_ERR "WARNING 32bit PCI may malfunction.\n");
+ printk(KERN_WARNING "More than 4GB of memory "
+ "but GART IOMMU not available.\n"
+ KERN_WARNING "falling back to iommu=soft.\n");
}
return;
}
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index be3c7a2..3903a8f 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -82,7 +82,6 @@
*/
void (*pm_idle)(void);
EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
void disable_hlt(void)
{
@@ -114,20 +113,13 @@
local_irq_disable();
if (!need_resched()) {
- ktime_t t0, t1;
- u64 t0n, t1n;
-
- t0 = ktime_get();
- t0n = ktime_to_ns(t0);
safe_halt(); /* enables interrupts racelessly */
local_irq_disable();
- t1 = ktime_get();
- t1n = ktime_to_ns(t1);
- sched_clock_idle_wakeup_event(t1n - t0n);
}
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
} else {
+ local_irq_enable();
/* loop is done by the caller */
cpu_relax();
}
@@ -143,6 +135,7 @@
*/
static void poll_idle(void)
{
+ local_irq_enable();
cpu_relax();
}
@@ -190,9 +183,6 @@
while (!need_resched()) {
void (*idle)(void);
- if (__get_cpu_var(cpu_idle_state))
- __get_cpu_var(cpu_idle_state) = 0;
-
check_pgt_cache();
rmb();
idle = pm_idle;
@@ -220,40 +210,19 @@
{
}
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
void cpu_idle_wait(void)
{
- unsigned int cpu, this_cpu = get_cpu();
- cpumask_t map, tmp = current->cpus_allowed;
-
- set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
- put_cpu();
-
- cpus_clear(map);
- for_each_online_cpu(cpu) {
- per_cpu(cpu_idle_state, cpu) = 1;
- cpu_set(cpu, map);
- }
-
- __get_cpu_var(cpu_idle_state) = 0;
-
- wmb();
- do {
- ssleep(1);
- for_each_online_cpu(cpu) {
- if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
- cpu_clear(cpu, map);
- }
- cpus_and(map, map, cpu_online_map);
- /*
- * We waited 1 sec, if a CPU still did not call idle
- * it may be because it is in idle and not waking up
- * because it has nothing to do.
- * Give all the remaining CPUS a kick.
- */
- smp_call_function_mask(map, do_nothing, NULL, 0);
- } while (!cpus_empty(map));
-
- set_cpus_allowed(current, tmp);
+ smp_mb();
+ /* kick all the CPUs so that they exit out of pm_idle */
+ smp_call_function(do_nothing, NULL, 0, 1);
}
EXPORT_SYMBOL_GPL(cpu_idle_wait);
@@ -273,8 +242,11 @@
__monitor((void *)¤t_thread_info()->flags, 0, 0);
smp_mb();
if (!need_resched())
- __mwait(ax, cx);
- }
+ __sti_mwait(ax, cx);
+ else
+ local_irq_enable();
+ } else
+ local_irq_enable();
}
/* Default MONITOR/MWAIT with no hints, used for default C1 state */
@@ -357,7 +329,7 @@
init_utsname()->version);
printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
- 0xffff & regs->cs, regs->ip, regs->flags,
+ (u16)regs->cs, regs->ip, regs->flags,
smp_processor_id());
print_symbol("EIP is at %s\n", regs->ip);
@@ -366,8 +338,7 @@
printk("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
regs->si, regs->di, regs->bp, sp);
printk(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
- regs->ds & 0xffff, regs->es & 0xffff,
- regs->fs & 0xffff, gs, ss);
+ (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, ss);
if (!all)
return;
@@ -538,6 +509,21 @@
return err;
}
+void
+start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+{
+ __asm__("movl %0, %%gs" :: "r"(0));
+ regs->fs = 0;
+ set_fs(USER_DS);
+ regs->ds = __USER_DS;
+ regs->es = __USER_DS;
+ regs->ss = __USER_DS;
+ regs->cs = __USER_CS;
+ regs->ip = new_ip;
+ regs->sp = new_sp;
+}
+EXPORT_SYMBOL_GPL(start_thread);
+
#ifdef CONFIG_SECCOMP
static void hard_disable_TSC(void)
{
@@ -575,12 +561,12 @@
/* we clear debugctl to make sure DS
* is not in use when we change it */
debugctl = 0;
- wrmsrl(MSR_IA32_DEBUGCTLMSR, 0);
+ update_debugctlmsr(0);
wrmsr(MSR_IA32_DS_AREA, next->ds_area_msr, 0);
}
if (next->debugctlmsr != debugctl)
- wrmsr(MSR_IA32_DEBUGCTLMSR, next->debugctlmsr, 0);
+ update_debugctlmsr(next->debugctlmsr);
if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
set_debugreg(next->debugreg0, 0);
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 3baf9b9..e75ccc8 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -63,7 +63,6 @@
*/
void (*pm_idle)(void);
EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
static ATOMIC_NOTIFIER_HEAD(idle_notifier);
@@ -108,16 +107,8 @@
smp_mb();
local_irq_disable();
if (!need_resched()) {
- ktime_t t0, t1;
- u64 t0n, t1n;
-
- t0 = ktime_get();
- t0n = ktime_to_ns(t0);
safe_halt(); /* enables interrupts racelessly */
local_irq_disable();
- t1 = ktime_get();
- t1n = ktime_to_ns(t1);
- sched_clock_idle_wakeup_event(t1n - t0n);
}
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
@@ -173,9 +164,6 @@
while (!need_resched()) {
void (*idle)(void);
- if (__get_cpu_var(cpu_idle_state))
- __get_cpu_var(cpu_idle_state) = 0;
-
rmb();
idle = pm_idle;
if (!idle)
@@ -207,40 +195,19 @@
{
}
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
void cpu_idle_wait(void)
{
- unsigned int cpu, this_cpu = get_cpu();
- cpumask_t map, tmp = current->cpus_allowed;
-
- set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
- put_cpu();
-
- cpus_clear(map);
- for_each_online_cpu(cpu) {
- per_cpu(cpu_idle_state, cpu) = 1;
- cpu_set(cpu, map);
- }
-
- __get_cpu_var(cpu_idle_state) = 0;
-
- wmb();
- do {
- ssleep(1);
- for_each_online_cpu(cpu) {
- if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
- cpu_clear(cpu, map);
- }
- cpus_and(map, map, cpu_online_map);
- /*
- * We waited 1 sec, if a CPU still did not call idle
- * it may be because it is in idle and not waking up
- * because it has nothing to do.
- * Give all the remaining CPUS a kick.
- */
- smp_call_function_mask(map, do_nothing, 0, 0);
- } while (!cpus_empty(map));
-
- set_cpus_allowed(current, tmp);
+ smp_mb();
+ /* kick all the CPUs so that they exit out of pm_idle */
+ smp_call_function(do_nothing, NULL, 0, 1);
}
EXPORT_SYMBOL_GPL(cpu_idle_wait);
@@ -553,6 +520,21 @@
return err;
}
+void
+start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+{
+ asm volatile("movl %0, %%fs; movl %0, %%es; movl %0, %%ds" :: "r"(0));
+ load_gs_index(0);
+ regs->ip = new_ip;
+ regs->sp = new_sp;
+ write_pda(oldrsp, new_sp);
+ regs->cs = __USER_CS;
+ regs->ss = __USER_DS;
+ regs->flags = 0x200;
+ set_fs(USER_DS);
+}
+EXPORT_SYMBOL_GPL(start_thread);
+
/*
* This special macro can be used to load a debugging register
*/
@@ -573,12 +555,12 @@
/* we clear debugctl to make sure DS
* is not in use when we change it */
debugctl = 0;
- wrmsrl(MSR_IA32_DEBUGCTLMSR, 0);
+ update_debugctlmsr(0);
wrmsrl(MSR_IA32_DS_AREA, next->ds_area_msr);
}
if (next->debugctlmsr != debugctl)
- wrmsrl(MSR_IA32_DEBUGCTLMSR, next->debugctlmsr);
+ update_debugctlmsr(next->debugctlmsr);
if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
loaddebug(next, 0);
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index eb92ccb..559c1b0 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1456,7 +1456,6 @@
/* notification of system call entry/exit
* - triggered by current->work.syscall_trace
*/
-__attribute__((regparm(3)))
int do_syscall_trace(struct pt_regs *regs, int entryexit)
{
int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU);
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 484c4a8..9692202 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -1,5 +1,4 @@
#include <linux/module.h>
-#include <linux/init.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/pm.h>
@@ -412,12 +411,12 @@
#ifdef CONFIG_X86_32
/* See if there has been given a command line override */
if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) &&
- cpu_isset(reboot_cpu, cpu_online_map))
+ cpu_online(reboot_cpu))
reboot_cpu_id = reboot_cpu;
#endif
/* Make certain the cpu I'm about to reboot on is online */
- if (!cpu_isset(reboot_cpu_id, cpu_online_map))
+ if (!cpu_online(reboot_cpu_id))
reboot_cpu_id = smp_processor_id();
/* Make certain I only run on the appropriate processor */
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index f151d6f..c30fe25 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -9,18 +9,19 @@
#include <linux/linkage.h>
#include <asm/page.h>
#include <asm/kexec.h>
+#include <asm/processor-flags.h>
+#include <asm/pgtable.h>
/*
* Must be relocatable PIC code callable as a C function
*/
#define PTR(x) (x << 2)
-#define PAGE_ALIGNED (1 << PAGE_SHIFT)
-#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */
-#define PAE_PGD_ATTR 0x01 /* _PAGE_PRESENT */
+#define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define PAE_PGD_ATTR (_PAGE_PRESENT)
.text
- .align PAGE_ALIGNED
+ .align PAGE_SIZE
.globl relocate_kernel
relocate_kernel:
movl 8(%esp), %ebp /* list of pages */
@@ -155,7 +156,7 @@
movl %eax, %cr3
/* setup a new stack at the end of the physical control page */
- lea 4096(%edi), %esp
+ lea PAGE_SIZE(%edi), %esp
/* jump to identity mapped page */
movl %edi, %eax
@@ -168,16 +169,16 @@
pushl %edx
/* Set cr0 to a known state:
- * 31 0 == Paging disabled
- * 18 0 == Alignment check disabled
- * 16 0 == Write protect disabled
- * 3 0 == No task switch
- * 2 0 == Don't do FP software emulation.
- * 0 1 == Proctected mode enabled
+ * - Paging disabled
+ * - Alignment check disabled
+ * - Write protect disabled
+ * - No task switch
+ * - Don't do FP software emulation.
+ * - Proctected mode enabled
*/
movl %cr0, %eax
- andl $~((1<<31)|(1<<18)|(1<<16)|(1<<3)|(1<<2)), %eax
- orl $(1<<0), %eax
+ andl $~(X86_CR0_PG | X86_CR0_AM | X86_CR0_WP | X86_CR0_TS | X86_CR0_EM), %eax
+ orl $(X86_CR0_PE), %eax
movl %eax, %cr0
/* clear cr4 if applicable */
@@ -186,8 +187,7 @@
/* Set cr4 to a known state:
* Setting everything to zero seems safe.
*/
- movl %cr4, %eax
- andl $0, %eax
+ xorl %eax, %eax
movl %eax, %cr4
jmp 1f
diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S
index 14e9587..f5afe66 100644
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -9,17 +9,18 @@
#include <linux/linkage.h>
#include <asm/page.h>
#include <asm/kexec.h>
+#include <asm/processor-flags.h>
+#include <asm/pgtable.h>
/*
* Must be relocatable PIC code callable as a C function
*/
#define PTR(x) (x << 3)
-#define PAGE_ALIGNED (1 << PAGE_SHIFT)
-#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */
+#define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
.text
- .align PAGE_ALIGNED
+ .align PAGE_SIZE
.code64
.globl relocate_kernel
relocate_kernel:
@@ -160,7 +161,7 @@
movq %r9, %cr3
/* setup a new stack at the end of the physical control page */
- lea 4096(%r8), %rsp
+ lea PAGE_SIZE(%r8), %rsp
/* jump to identity mapped page */
addq $(identity_mapped - relocate_kernel), %r8
@@ -172,33 +173,22 @@
pushq %rdx
/* Set cr0 to a known state:
- * 31 1 == Paging enabled
- * 18 0 == Alignment check disabled
- * 16 0 == Write protect disabled
- * 3 0 == No task switch
- * 2 0 == Don't do FP software emulation.
- * 0 1 == Proctected mode enabled
+ * - Paging enabled
+ * - Alignment check disabled
+ * - Write protect disabled
+ * - No task switch
+ * - Don't do FP software emulation.
+ * - Proctected mode enabled
*/
movq %cr0, %rax
- andq $~((1<<18)|(1<<16)|(1<<3)|(1<<2)), %rax
- orl $((1<<31)|(1<<0)), %eax
+ andq $~(X86_CR0_AM | X86_CR0_WP | X86_CR0_TS | X86_CR0_EM), %rax
+ orl $(X86_CR0_PG | X86_CR0_PE), %eax
movq %rax, %cr0
/* Set cr4 to a known state:
- * 10 0 == xmm exceptions disabled
- * 9 0 == xmm registers instructions disabled
- * 8 0 == performance monitoring counter disabled
- * 7 0 == page global disabled
- * 6 0 == machine check exceptions disabled
- * 5 1 == physical address extension enabled
- * 4 0 == page size extensions disabled
- * 3 0 == Debug extensions disabled
- * 2 0 == Time stamp disable (disabled)
- * 1 0 == Protected mode virtual interrupts disabled
- * 0 0 == VME disabled
+ * - physical address extension enabled
*/
-
- movq $((1<<5)), %rax
+ movq $X86_CR4_PAE, %rax
movq %rax, %cr4
jmp 1f
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index eb9b1a1..9615eee 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -9,7 +9,6 @@
#include <asm/vsyscall.h>
#ifdef CONFIG_X86_32
-# define CMOS_YEARS_OFFS 1900
/*
* This is a special lock that is owned by the CPU and holds the index
* register we are working with. It is required for NMI access to the
@@ -17,14 +16,11 @@
*/
volatile unsigned long cmos_lock = 0;
EXPORT_SYMBOL(cmos_lock);
-#else
-/*
- * x86-64 systems only exists since 2002.
- * This will work up to Dec 31, 2100
- */
-# define CMOS_YEARS_OFFS 2000
#endif
+/* For two digit years assume time is always after that */
+#define CMOS_YEARS_OFFS 2000
+
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
@@ -98,7 +94,7 @@
unsigned long mach_get_cmos_time(void)
{
- unsigned int year, mon, day, hour, min, sec, century = 0;
+ unsigned int status, year, mon, day, hour, min, sec, century = 0;
/*
* If UIP is clear, then we have >= 244 microseconds before
@@ -116,14 +112,16 @@
mon = CMOS_READ(RTC_MONTH);
year = CMOS_READ(RTC_YEAR);
-#if defined(CONFIG_ACPI) && defined(CONFIG_X86_64)
- /* CHECKME: Is this really 64bit only ??? */
+#ifdef CONFIG_ACPI
if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
acpi_gbl_FADT.century)
century = CMOS_READ(acpi_gbl_FADT.century);
#endif
- if (RTC_ALWAYS_BCD || !(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)) {
+ status = CMOS_READ(RTC_CONTROL);
+ WARN_ON_ONCE(RTC_ALWAYS_BCD && (status & RTC_DM_BINARY));
+
+ if (RTC_ALWAYS_BCD || !(status & RTC_DM_BINARY)) {
BCD_TO_BIN(sec);
BCD_TO_BIN(min);
BCD_TO_BIN(hour);
@@ -136,11 +134,8 @@
BCD_TO_BIN(century);
year += century * 100;
printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
- } else {
+ } else
year += CMOS_YEARS_OFFS;
- if (year < 1970)
- year += 100;
- }
return mktime(year, mon, day, hour, min, sec);
}
@@ -151,8 +146,8 @@
unsigned char val;
lock_cmos_prefix(addr);
- outb_p(addr, RTC_PORT(0));
- val = inb_p(RTC_PORT(1));
+ outb(addr, RTC_PORT(0));
+ val = inb(RTC_PORT(1));
lock_cmos_suffix(addr);
return val;
}
@@ -161,8 +156,8 @@
void rtc_cmos_write(unsigned char val, unsigned char addr)
{
lock_cmos_prefix(addr);
- outb_p(addr, RTC_PORT(0));
- outb_p(val, RTC_PORT(1));
+ outb(addr, RTC_PORT(0));
+ outb(val, RTC_PORT(1));
lock_cmos_suffix(addr);
}
EXPORT_SYMBOL(rtc_cmos_write);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
new file mode 100644
index 0000000..ed157c9
--- /dev/null
+++ b/arch/x86/kernel/setup.c
@@ -0,0 +1,113 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/percpu.h>
+#include <asm/smp.h>
+#include <asm/percpu.h>
+#include <asm/sections.h>
+#include <asm/processor.h>
+#include <asm/setup.h>
+#include <asm/topology.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+
+unsigned int num_processors;
+unsigned disabled_cpus __cpuinitdata;
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+EXPORT_SYMBOL(boot_cpu_physical_apicid);
+
+physid_mask_t phys_cpu_present_map;
+
+DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
+EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
+
+/* Bitmask of physically existing CPUs */
+physid_mask_t phys_cpu_present_map;
+
+#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_SMP)
+/*
+ * Copy data used in early init routines from the initial arrays to the
+ * per cpu data areas. These arrays then become expendable and the
+ * *_early_ptr's are zeroed indicating that the static arrays are gone.
+ */
+static void __init setup_per_cpu_maps(void)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ per_cpu(x86_cpu_to_apicid, cpu) = x86_cpu_to_apicid_init[cpu];
+ per_cpu(x86_bios_cpu_apicid, cpu) =
+ x86_bios_cpu_apicid_init[cpu];
+#ifdef CONFIG_NUMA
+ per_cpu(x86_cpu_to_node_map, cpu) =
+ x86_cpu_to_node_map_init[cpu];
+#endif
+ }
+
+ /* indicate the early static arrays will soon be gone */
+ x86_cpu_to_apicid_early_ptr = NULL;
+ x86_bios_cpu_apicid_early_ptr = NULL;
+#ifdef CONFIG_NUMA
+ x86_cpu_to_node_map_early_ptr = NULL;
+#endif
+}
+
+#ifdef CONFIG_X86_32
+/*
+ * Great future not-so-futuristic plan: make i386 and x86_64 do it
+ * the same way
+ */
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+#endif
+
+/*
+ * Great future plan:
+ * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
+ * Always point %gs to its beginning
+ */
+void __init setup_per_cpu_areas(void)
+{
+ int i;
+ unsigned long size;
+
+#ifdef CONFIG_HOTPLUG_CPU
+ prefill_possible_map();
+#endif
+
+ /* Copy section for each CPU (we discard the original) */
+ size = PERCPU_ENOUGH_ROOM;
+ printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n",
+ size);
+
+ for_each_possible_cpu(i) {
+ char *ptr;
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+ ptr = alloc_bootmem_pages(size);
+#else
+ int node = early_cpu_to_node(i);
+ if (!node_online(node) || !NODE_DATA(node)) {
+ ptr = alloc_bootmem_pages(size);
+ printk(KERN_INFO
+ "cpu %d has no node or node-local memory\n", i);
+ }
+ else
+ ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+#endif
+ if (!ptr)
+ panic("Cannot allocate cpu data for CPU %d\n", i);
+#ifdef CONFIG_X86_64
+ cpu_pda(i)->data_offset = ptr - __per_cpu_start;
+#else
+ __per_cpu_offset[i] = ptr - __per_cpu_start;
+#endif
+ memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+ }
+
+ /* Setup percpu data maps */
+ setup_per_cpu_maps();
+}
+
+#endif
diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c
index e24c456..9042fb0 100644
--- a/arch/x86/kernel/setup64.c
+++ b/arch/x86/kernel/setup64.c
@@ -11,6 +11,7 @@
#include <linux/bootmem.h>
#include <linux/bitops.h>
#include <linux/module.h>
+#include <linux/kgdb.h>
#include <asm/pda.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
@@ -23,6 +24,7 @@
#include <asm/proto.h>
#include <asm/sections.h>
#include <asm/setup.h>
+#include <asm/genapic.h>
#ifndef CONFIG_DEBUG_BOOT_PARAMS
struct boot_params __initdata boot_params;
@@ -85,83 +87,6 @@
}
__setup("noexec32=", nonx32_setup);
-/*
- * Copy data used in early init routines from the initial arrays to the
- * per cpu data areas. These arrays then become expendable and the
- * *_early_ptr's are zeroed indicating that the static arrays are gone.
- */
-static void __init setup_per_cpu_maps(void)
-{
- int cpu;
-
- for_each_possible_cpu(cpu) {
-#ifdef CONFIG_SMP
- if (per_cpu_offset(cpu)) {
-#endif
- per_cpu(x86_cpu_to_apicid, cpu) =
- x86_cpu_to_apicid_init[cpu];
- per_cpu(x86_bios_cpu_apicid, cpu) =
- x86_bios_cpu_apicid_init[cpu];
-#ifdef CONFIG_NUMA
- per_cpu(x86_cpu_to_node_map, cpu) =
- x86_cpu_to_node_map_init[cpu];
-#endif
-#ifdef CONFIG_SMP
- }
- else
- printk(KERN_NOTICE "per_cpu_offset zero for cpu %d\n",
- cpu);
-#endif
- }
-
- /* indicate the early static arrays will soon be gone */
- x86_cpu_to_apicid_early_ptr = NULL;
- x86_bios_cpu_apicid_early_ptr = NULL;
-#ifdef CONFIG_NUMA
- x86_cpu_to_node_map_early_ptr = NULL;
-#endif
-}
-
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
-void __init setup_per_cpu_areas(void)
-{
- int i;
- unsigned long size;
-
-#ifdef CONFIG_HOTPLUG_CPU
- prefill_possible_map();
-#endif
-
- /* Copy section for each CPU (we discard the original) */
- size = PERCPU_ENOUGH_ROOM;
-
- printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size);
- for_each_cpu_mask (i, cpu_possible_map) {
- char *ptr;
-#ifndef CONFIG_NEED_MULTIPLE_NODES
- ptr = alloc_bootmem_pages(size);
-#else
- int node = early_cpu_to_node(i);
-
- if (!node_online(node) || !NODE_DATA(node))
- ptr = alloc_bootmem_pages(size);
- else
- ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
-#endif
- if (!ptr)
- panic("Cannot allocate cpu data for CPU %d\n", i);
- cpu_pda(i)->data_offset = ptr - __per_cpu_start;
- memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
- }
-
- /* setup percpu data maps early */
- setup_per_cpu_maps();
-}
-
void pda_init(int cpu)
{
struct x8664_pda *pda = cpu_pda(cpu);
@@ -327,6 +252,17 @@
load_TR_desc();
load_LDT(&init_mm.context);
+#ifdef CONFIG_KGDB
+ /*
+ * If the kgdb is connected no debug regs should be altered. This
+ * is only applicable when KGDB and a KGDB I/O module are built
+ * into the kernel and you are using early debugging with
+ * kgdbwait. KGDB will control the kernel HW breakpoint registers.
+ */
+ if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
+ arch_kgdb_ops.correct_hw_break();
+ else {
+#endif
/*
* Clear all 6 debug registers:
*/
@@ -337,8 +273,15 @@
set_debugreg(0UL, 3);
set_debugreg(0UL, 6);
set_debugreg(0UL, 7);
+#ifdef CONFIG_KGDB
+ /* If the kgdb is connected no debug regs should be altered. */
+ }
+#endif
fpu_init();
raw_local_save_flags(kernel_eflags);
+
+ if (is_uv_system())
+ uv_cpu_init();
}
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 2b3e5d4..5b0bffb 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -62,8 +62,9 @@
#include <asm/io.h>
#include <asm/vmi.h>
#include <setup_arch.h>
-#include <bios_ebda.h>
+#include <asm/bios_ebda.h>
#include <asm/cacheflush.h>
+#include <asm/processor.h>
/* This value is set up by the early boot code to point to the value
immediately after the boot time page tables. It contains a *physical*
@@ -154,6 +155,8 @@
struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
EXPORT_SYMBOL(boot_cpu_data);
+unsigned int def_to_bigsmp;
+
#ifndef CONFIG_X86_PAE
unsigned long mmu_cr4_features;
#else
@@ -189,7 +192,7 @@
extern void early_cpu_init(void);
extern int root_mountflags;
-unsigned long saved_videomode;
+unsigned long saved_video_mode;
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
@@ -227,7 +230,7 @@
}
#endif
-int __initdata user_defined_memmap = 0;
+int __initdata user_defined_memmap;
/*
* "mem=nopentium" disables the 4MB page tables.
@@ -385,15 +388,56 @@
return max_low_pfn;
}
+#define BIOS_EBDA_SEGMENT 0x40E
+#define BIOS_LOWMEM_KILOBYTES 0x413
+
/*
- * workaround for Dell systems that neglect to reserve EBDA
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
*/
static void __init reserve_ebda_region(void)
{
- unsigned int addr;
- addr = get_bios_ebda();
- if (addr)
- reserve_bootmem(addr, PAGE_SIZE, BOOTMEM_DEFAULT);
+ unsigned int lowmem, ebda_addr;
+
+ /* To determine the position of the EBDA and the */
+ /* end of conventional memory, we need to look at */
+ /* the BIOS data area. In a paravirtual environment */
+ /* that area is absent. We'll just have to assume */
+ /* that the paravirt case can handle memory setup */
+ /* correctly, without our help. */
+ if (paravirt_enabled())
+ return;
+
+ /* end of low (conventional) memory */
+ lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+ lowmem <<= 10;
+
+ /* start of EBDA area */
+ ebda_addr = *(unsigned short *)__va(BIOS_EBDA_SEGMENT);
+ ebda_addr <<= 4;
+
+ /* Fixup: bios puts an EBDA in the top 64K segment */
+ /* of conventional memory, but does not adjust lowmem. */
+ if ((lowmem - ebda_addr) <= 0x10000)
+ lowmem = ebda_addr;
+
+ /* Fixup: bios does not report an EBDA at all. */
+ /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+ if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+ lowmem = 0x9f000;
+
+ /* Paranoia: should never happen, but... */
+ if ((lowmem == 0) || (lowmem >= 0x100000))
+ lowmem = 0x9f000;
+
+ /* reserve all memory between lowmem and the 1MB mark */
+ reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT);
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
@@ -617,16 +661,9 @@
*/
reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
- /* reserve EBDA region, it's a 4K region */
+ /* reserve EBDA region */
reserve_ebda_region();
- /* could be an AMD 768MPX chipset. Reserve a page before VGA to prevent
- PCI prefetch into it (errata #56). Usually the page is reserved anyways,
- unless you have no PS/2 mouse plugged in. */
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
- boot_cpu_data.x86 == 6)
- reserve_bootmem(0xa0000 - 4096, 4096, BOOTMEM_DEFAULT);
-
#ifdef CONFIG_SMP
/*
* But first pinch a few for the stack/trampoline stuff
@@ -687,6 +724,18 @@
return machine_specific_memory_setup();
}
+#ifdef CONFIG_NUMA
+/*
+ * In the golden day, when everything among i386 and x86_64 will be
+ * integrated, this will not live here
+ */
+void *x86_cpu_to_node_map_early_ptr;
+int x86_cpu_to_node_map_init[NR_CPUS] = {
+ [0 ... NR_CPUS-1] = NUMA_NO_NODE
+};
+DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE;
+#endif
+
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
@@ -714,7 +763,7 @@
edid_info = boot_params.edid_info;
apm_info.bios = boot_params.apm_bios_info;
ist_info = boot_params.ist_info;
- saved_videomode = boot_params.hdr.vid_mode;
+ saved_video_mode = boot_params.hdr.vid_mode;
if( boot_params.sys_desc_table.length != 0 ) {
set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
machine_id = boot_params.sys_desc_table.table[0];
@@ -820,6 +869,18 @@
io_delay_init();
+#ifdef CONFIG_X86_SMP
+ /*
+ * setup to use the early static init tables during kernel startup
+ * X86_SMP will exclude sub-arches that don't deal well with it.
+ */
+ x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
+ x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init;
+#ifdef CONFIG_NUMA
+ x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init;
+#endif
+#endif
+
#ifdef CONFIG_X86_GENERICARCH
generic_apic_probe();
#endif
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index f4f7ecf..674ef35 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -58,7 +58,6 @@
#include <asm/mmu_context.h>
#include <asm/proto.h>
#include <asm/setup.h>
-#include <asm/mach_apic.h>
#include <asm/numa.h>
#include <asm/sections.h>
#include <asm/dmi.h>
@@ -66,7 +65,9 @@
#include <asm/mce.h>
#include <asm/ds.h>
#include <asm/topology.h>
+#include <asm/trampoline.h>
+#include <mach_apic.h>
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
@@ -248,6 +249,7 @@
(unsigned long)(total_mem >> 20));
crashk_res.start = crash_base;
crashk_res.end = crash_base + crash_size - 1;
+ insert_resource(&iomem_resource, &crashk_res);
}
}
#else
@@ -322,6 +324,11 @@
finish_e820_parsing();
+ /* after parse_early_param, so could debug it */
+ insert_resource(&iomem_resource, &code_resource);
+ insert_resource(&iomem_resource, &data_resource);
+ insert_resource(&iomem_resource, &bss_resource);
+
early_gart_iommu_check();
e820_register_active_regions(0, 0, -1UL);
@@ -341,10 +348,12 @@
check_efer();
- init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
+ max_pfn_mapped = init_memory_mapping(0, (max_pfn_mapped << PAGE_SHIFT));
if (efi_enabled)
efi_init();
+ vsmp_init();
+
dmi_scan_machine();
io_delay_init();
@@ -450,7 +459,7 @@
/*
* We trust e820 completely. No explicit ROM probing in memory.
*/
- e820_reserve_resources(&code_resource, &data_resource, &bss_resource);
+ e820_reserve_resources();
e820_mark_nosave_regions();
/* request I/O space for devices used on all i[345]86 PCs */
@@ -552,9 +561,9 @@
bits = c->x86_coreid_bits;
/* Low order bits define the core id (index of core in socket) */
- c->cpu_core_id = c->phys_proc_id & ((1 << bits)-1);
- /* Convert the APIC ID into the socket ID */
- c->phys_proc_id = phys_pkg_id(bits);
+ c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
+ /* Convert the initial APIC ID into the socket ID */
+ c->phys_proc_id = c->initial_apicid >> bits;
#ifdef CONFIG_NUMA
node = c->phys_proc_id;
@@ -571,7 +580,7 @@
If that doesn't result in a usable node fall back to the
path for the previous case. */
- int ht_nodeid = apicid - (cpu_data(0).phys_proc_id << bits);
+ int ht_nodeid = c->initial_apicid;
if (ht_nodeid >= 0 &&
apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
@@ -677,7 +686,7 @@
/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
- clear_bit(0*32+31, (unsigned long *)&c->x86_capability);
+ clear_cpu_cap(c, 0*32+31);
/* On C+ stepping K8 rep microcode works well for copy/memset */
level = cpuid_eax(1);
@@ -721,6 +730,19 @@
if (amd_apic_timer_broken())
disable_apic_timer = 1;
+
+ if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
+ unsigned long long tseg;
+
+ /*
+ * Split up direct mapping around the TSEG SMM area.
+ * Don't do it for gbpages because there seems very little
+ * benefit in doing so.
+ */
+ if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) &&
+ (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT)))
+ set_memory_4k((unsigned long)__va(tseg), 1);
+ }
}
void __cpuinit detect_ht(struct cpuinfo_x86 *c)
@@ -813,7 +835,7 @@
{
if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
(c->x86 == 0x6 && c->x86_model >= 0x0e))
- set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
}
static void __cpuinit init_intel(struct cpuinfo_x86 *c)
@@ -856,9 +878,6 @@
if (c->x86 == 15)
c->x86_cache_alignment = c->x86_clflush_size * 2;
- if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
- (c->x86 == 0x6 && c->x86_model >= 0x0e))
- set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
if (c->x86 == 6)
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
@@ -867,6 +886,32 @@
srat_detect_node();
}
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+ if (c->x86 == 0x6 && c->x86_model >= 0xf)
+ set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+}
+
+static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
+{
+ /* Cache sizes */
+ unsigned n;
+
+ n = c->extended_cpuid_level;
+ if (n >= 0x80000008) {
+ unsigned eax = cpuid_eax(0x80000008);
+ c->x86_virt_bits = (eax >> 8) & 0xff;
+ c->x86_phys_bits = eax & 0xff;
+ }
+
+ if (c->x86 == 0x6 && c->x86_model >= 0xf) {
+ c->x86_cache_alignment = c->x86_clflush_size * 2;
+ set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+ set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+ }
+ set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
+}
+
static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
{
char *v = c->x86_vendor_id;
@@ -875,6 +920,8 @@
c->x86_vendor = X86_VENDOR_AMD;
else if (!strcmp(v, "GenuineIntel"))
c->x86_vendor = X86_VENDOR_INTEL;
+ else if (!strcmp(v, "CentaurHauls"))
+ c->x86_vendor = X86_VENDOR_CENTAUR;
else
c->x86_vendor = X86_VENDOR_UNKNOWN;
}
@@ -922,15 +969,16 @@
c->x86 += (tfms >> 20) & 0xff;
if (c->x86 >= 0x6)
c->x86_model += ((tfms >> 16) & 0xF) << 4;
- if (c->x86_capability[0] & (1<<19))
+ if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
} else {
/* Have CPUID level 0 only - unheard of */
c->x86 = 4;
}
+ c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
#ifdef CONFIG_SMP
- c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
+ c->phys_proc_id = c->initial_apicid;
#endif
/* AMD-defined flags: level 0x80000001 */
xlvl = cpuid_eax(0x80000000);
@@ -956,12 +1004,22 @@
if (c->extended_cpuid_level >= 0x80000007)
c->x86_power = cpuid_edx(0x80000007);
+
+ clear_cpu_cap(c, X86_FEATURE_PAT);
+
switch (c->x86_vendor) {
case X86_VENDOR_AMD:
early_init_amd(c);
+ if (c->x86 >= 0xf && c->x86 <= 0x11)
+ set_cpu_cap(c, X86_FEATURE_PAT);
break;
case X86_VENDOR_INTEL:
early_init_intel(c);
+ if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+ set_cpu_cap(c, X86_FEATURE_PAT);
+ break;
+ case X86_VENDOR_CENTAUR:
+ early_init_centaur(c);
break;
}
@@ -999,6 +1057,10 @@
init_intel(c);
break;
+ case X86_VENDOR_CENTAUR:
+ init_centaur(c);
+ break;
+
case X86_VENDOR_UNKNOWN:
default:
display_cacheinfo(c);
@@ -1028,14 +1090,24 @@
#endif
select_idle_routine(c);
- if (c != &boot_cpu_data)
- mtrr_ap_init();
#ifdef CONFIG_NUMA
numa_add_cpu(smp_processor_id());
#endif
}
+void __cpuinit identify_boot_cpu(void)
+{
+ identify_cpu(&boot_cpu_data);
+}
+
+void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
+{
+ BUG_ON(c == &boot_cpu_data);
+ identify_cpu(c);
+ mtrr_ap_init();
+}
+
static __init int setup_noclflush(char *arg)
{
setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
@@ -1064,123 +1136,3 @@
return 1;
}
__setup("clearcpuid=", setup_disablecpuid);
-
-/*
- * Get CPU information for use by the procfs.
- */
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
- struct cpuinfo_x86 *c = v;
- int cpu = 0, i;
-
-#ifdef CONFIG_SMP
- cpu = c->cpu_index;
-#endif
-
- seq_printf(m, "processor\t: %u\n"
- "vendor_id\t: %s\n"
- "cpu family\t: %d\n"
- "model\t\t: %d\n"
- "model name\t: %s\n",
- (unsigned)cpu,
- c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
- c->x86,
- (int)c->x86_model,
- c->x86_model_id[0] ? c->x86_model_id : "unknown");
-
- if (c->x86_mask || c->cpuid_level >= 0)
- seq_printf(m, "stepping\t: %d\n", c->x86_mask);
- else
- seq_printf(m, "stepping\t: unknown\n");
-
- if (cpu_has(c, X86_FEATURE_TSC)) {
- unsigned int freq = cpufreq_quick_get((unsigned)cpu);
-
- if (!freq)
- freq = cpu_khz;
- seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
- freq / 1000, (freq % 1000));
- }
-
- /* Cache size */
- if (c->x86_cache_size >= 0)
- seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
-
-#ifdef CONFIG_SMP
- if (smp_num_siblings * c->x86_max_cores > 1) {
- seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
- seq_printf(m, "siblings\t: %d\n",
- cpus_weight(per_cpu(cpu_core_map, cpu)));
- seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
- seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
- }
-#endif
-
- seq_printf(m,
- "fpu\t\t: yes\n"
- "fpu_exception\t: yes\n"
- "cpuid level\t: %d\n"
- "wp\t\t: yes\n"
- "flags\t\t:",
- c->cpuid_level);
-
- for (i = 0; i < 32*NCAPINTS; i++)
- if (cpu_has(c, i) && x86_cap_flags[i] != NULL)
- seq_printf(m, " %s", x86_cap_flags[i]);
-
- seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
- c->loops_per_jiffy/(500000/HZ),
- (c->loops_per_jiffy/(5000/HZ)) % 100);
-
- if (c->x86_tlbsize > 0)
- seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize);
- seq_printf(m, "clflush size\t: %d\n", c->x86_clflush_size);
- seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment);
-
- seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n",
- c->x86_phys_bits, c->x86_virt_bits);
-
- seq_printf(m, "power management:");
- for (i = 0; i < 32; i++) {
- if (c->x86_power & (1 << i)) {
- if (i < ARRAY_SIZE(x86_power_flags) &&
- x86_power_flags[i])
- seq_printf(m, "%s%s",
- x86_power_flags[i][0]?" ":"",
- x86_power_flags[i]);
- else
- seq_printf(m, " [%d]", i);
- }
- }
-
- seq_printf(m, "\n\n");
-
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- if (*pos == 0) /* just in case, cpu 0 is not the first */
- *pos = first_cpu(cpu_online_map);
- if ((*pos) < NR_CPUS && cpu_online(*pos))
- return &cpu_data(*pos);
- return NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- *pos = next_cpu(*pos, cpu_online_map);
- return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
-};
diff --git a/arch/x86/kernel/sigframe_32.h b/arch/x86/kernel/sigframe.h
similarity index 66%
rename from arch/x86/kernel/sigframe_32.h
rename to arch/x86/kernel/sigframe.h
index 0b22217..72bbb51 100644
--- a/arch/x86/kernel/sigframe_32.h
+++ b/arch/x86/kernel/sigframe.h
@@ -1,5 +1,5 @@
-struct sigframe
-{
+#ifdef CONFIG_X86_32
+struct sigframe {
char __user *pretcode;
int sig;
struct sigcontext sc;
@@ -8,8 +8,7 @@
char retcode[8];
};
-struct rt_sigframe
-{
+struct rt_sigframe {
char __user *pretcode;
int sig;
struct siginfo __user *pinfo;
@@ -19,3 +18,10 @@
struct _fpstate fpstate;
char retcode[8];
};
+#else
+struct rt_sigframe {
+ char __user *pretcode;
+ struct ucontext uc;
+ struct siginfo info;
+};
+#endif
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index 0157a6f..f1b1179 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -4,32 +4,44 @@
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
* 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
*/
+#include <linux/list.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
#include <linux/personality.h>
-#include <linux/suspend.h>
-#include <linux/ptrace.h>
-#include <linux/elf.h>
#include <linux/binfmts.h>
+#include <linux/suspend.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/signal.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/elf.h>
+#include <linux/smp.h>
+#include <linux/mm.h>
+
#include <asm/processor.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/i387.h>
#include <asm/vdso.h>
-#include "sigframe_32.h"
-#define DEBUG_SIG 0
+#include "sigframe.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+#define __FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_OF | \
+ X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
+ X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
+ X86_EFLAGS_CF)
+
+#ifdef CONFIG_X86_32
+# define FIX_EFLAGS (__FIX_EFLAGS | X86_EFLAGS_RF)
+#else
+# define FIX_EFLAGS __FIX_EFLAGS
+#endif
+
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
@@ -46,10 +58,11 @@
current->state = TASK_INTERRUPTIBLE;
schedule();
set_thread_flag(TIF_RESTORE_SIGMASK);
+
return -ERESTARTNOHAND;
}
-asmlinkage int
+asmlinkage int
sys_sigaction(int sig, const struct old_sigaction __user *act,
struct old_sigaction __user *oact)
{
@@ -58,10 +71,12 @@
if (act) {
old_sigset_t mask;
+
if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
__get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
__get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
return -EFAULT;
+
__get_user(new_ka.sa.sa_flags, &act->sa_flags);
__get_user(mask, &act->sa_mask);
siginitset(&new_ka.sa.sa_mask, mask);
@@ -74,6 +89,7 @@
__put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
__put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
return -EFAULT;
+
__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
}
@@ -81,10 +97,12 @@
return ret;
}
-asmlinkage int
-sys_sigaltstack(unsigned long bx)
+asmlinkage int sys_sigaltstack(unsigned long bx)
{
- /* This is needed to make gcc realize it doesn't own the "struct pt_regs" */
+ /*
+ * This is needed to make gcc realize it doesn't own the
+ * "struct pt_regs"
+ */
struct pt_regs *regs = (struct pt_regs *)&bx;
const stack_t __user *uss = (const stack_t __user *)bx;
stack_t __user *uoss = (stack_t __user *)regs->cx;
@@ -96,9 +114,9 @@
/*
* Do a signal return; undo the signal stack.
*/
-
static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax)
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
+ unsigned long *pax)
{
unsigned int err = 0;
@@ -120,37 +138,29 @@
#define GET_SEG(seg) \
{ unsigned short tmp; \
err |= __get_user(tmp, &sc->seg); \
- loadsegment(seg,tmp); }
-
-#define FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_RF | \
- X86_EFLAGS_OF | X86_EFLAGS_DF | \
- X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \
- X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF)
+ loadsegment(seg, tmp); }
GET_SEG(gs);
COPY_SEG(fs);
COPY_SEG(es);
COPY_SEG(ds);
- COPY(di);
- COPY(si);
- COPY(bp);
- COPY(sp);
- COPY(bx);
- COPY(dx);
- COPY(cx);
- COPY(ip);
+ COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
+ COPY(dx); COPY(cx); COPY(ip);
COPY_SEG_STRICT(cs);
COPY_SEG_STRICT(ss);
-
+
{
unsigned int tmpflags;
+
err |= __get_user(tmpflags, &sc->flags);
- regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+ regs->flags = (regs->flags & ~FIX_EFLAGS) |
+ (tmpflags & FIX_EFLAGS);
regs->orig_ax = -1; /* disable syscall checks */
}
{
- struct _fpstate __user * buf;
+ struct _fpstate __user *buf;
+
err |= __get_user(buf, &sc->fpstate);
if (buf) {
if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
@@ -158,6 +168,7 @@
err |= restore_i387(buf);
} else {
struct task_struct *me = current;
+
if (used_math()) {
clear_fpu(me);
clear_used_math();
@@ -165,24 +176,26 @@
}
}
- err |= __get_user(*peax, &sc->ax);
+ err |= __get_user(*pax, &sc->ax);
return err;
badframe:
return 1;
}
-asmlinkage int sys_sigreturn(unsigned long __unused)
+asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
{
- struct pt_regs *regs = (struct pt_regs *) &__unused;
- struct sigframe __user *frame = (struct sigframe __user *)(regs->sp - 8);
+ struct sigframe __user *frame;
+ struct pt_regs *regs;
+ unsigned long ax;
sigset_t set;
- int ax;
+
+ regs = (struct pt_regs *) &__unused;
+ frame = (struct sigframe __user *)(regs->sp - 8);
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_NSIG_WORDS > 1
+ if (__get_user(set.sig[0], &frame->sc.oldmask) || (_NSIG_WORDS > 1
&& __copy_from_user(&set.sig[1], &frame->extramask,
sizeof(frame->extramask))))
goto badframe;
@@ -192,33 +205,35 @@
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
-
+
if (restore_sigcontext(regs, &frame->sc, &ax))
goto badframe;
return ax;
badframe:
if (show_unhandled_signals && printk_ratelimit()) {
- printk("%s%s[%d] bad frame in sigreturn frame:%p ip:%lx"
- " sp:%lx oeax:%lx",
+ printk(KERN_INFO "%s%s[%d] bad frame in sigreturn frame:"
+ "%p ip:%lx sp:%lx oeax:%lx",
task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
current->comm, task_pid_nr(current), frame, regs->ip,
regs->sp, regs->orig_ax);
print_vma_addr(" in ", regs->ip);
- printk("\n");
+ printk(KERN_CONT "\n");
}
force_sig(SIGSEGV, current);
+
return 0;
-}
+}
asmlinkage int sys_rt_sigreturn(unsigned long __unused)
{
- struct pt_regs *regs = (struct pt_regs *) &__unused;
- struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->sp - 4);
+ struct pt_regs *regs = (struct pt_regs *)&__unused;
+ struct rt_sigframe __user *frame;
+ unsigned long ax;
sigset_t set;
- int ax;
+ frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
@@ -229,7 +244,7 @@
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
-
+
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
goto badframe;
@@ -241,12 +256,11 @@
badframe:
force_sig(SIGSEGV, current);
return 0;
-}
+}
/*
* Set up a signal frame.
*/
-
static int
setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
struct pt_regs *regs, unsigned long mask)
@@ -277,9 +291,9 @@
tmp = save_i387(fpstate);
if (tmp < 0)
- err = 1;
+ err = 1;
else
- err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
+ err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
/* non-iBCS2 extensions.. */
err |= __put_user(mask, &sc->oldmask);
@@ -292,7 +306,7 @@
* Determine which stack to use..
*/
static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
{
unsigned long sp;
@@ -310,32 +324,30 @@
if (ka->sa.sa_flags & SA_ONSTACK) {
if (sas_ss_flags(sp) == 0)
sp = current->sas_ss_sp + current->sas_ss_size;
- }
-
- /* This is the legacy signal stack switching. */
- else if ((regs->ss & 0xffff) != __USER_DS &&
- !(ka->sa.sa_flags & SA_RESTORER) &&
- ka->sa.sa_restorer) {
- sp = (unsigned long) ka->sa.sa_restorer;
+ } else {
+ /* This is the legacy signal stack switching. */
+ if ((regs->ss & 0xffff) != __USER_DS &&
+ !(ka->sa.sa_flags & SA_RESTORER) &&
+ ka->sa.sa_restorer)
+ sp = (unsigned long) ka->sa.sa_restorer;
}
sp -= frame_size;
- /* Align the stack pointer according to the i386 ABI,
- * i.e. so that on function entry ((sp + 4) & 15) == 0. */
+ /*
+ * Align the stack pointer according to the i386 ABI,
+ * i.e. so that on function entry ((sp + 4) & 15) == 0.
+ */
sp = ((sp + 4) & -16ul) - 4;
+
return (void __user *) sp;
}
-/* These symbols are defined with the addresses in the vsyscall page.
- See vsyscall-sigreturn.S. */
-extern void __user __kernel_sigreturn;
-extern void __user __kernel_rt_sigreturn;
-
-static int setup_frame(int sig, struct k_sigaction *ka,
- sigset_t *set, struct pt_regs * regs)
+static int
+setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
+ struct pt_regs *regs)
{
- void __user *restorer;
struct sigframe __user *frame;
+ void __user *restorer;
int err = 0;
int usig;
@@ -365,7 +377,7 @@
goto give_sigsegv;
}
- if (current->binfmt->hasvdso)
+ if (current->mm->context.vdso)
restorer = VDSO32_SYMBOL(current->mm->context.vdso, sigreturn);
else
restorer = &frame->retcode;
@@ -374,9 +386,9 @@
/* Set up to return from userspace. */
err |= __put_user(restorer, &frame->pretcode);
-
+
/*
- * This is popl %eax ; movl $,%eax ; int $0x80
+ * This is popl %eax ; movl $__NR_sigreturn, %eax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
@@ -390,11 +402,11 @@
goto give_sigsegv;
/* Set up registers for signal handler */
- regs->sp = (unsigned long) frame;
- regs->ip = (unsigned long) ka->sa.sa_handler;
- regs->ax = (unsigned long) sig;
- regs->dx = (unsigned long) 0;
- regs->cx = (unsigned long) 0;
+ regs->sp = (unsigned long)frame;
+ regs->ip = (unsigned long)ka->sa.sa_handler;
+ regs->ax = (unsigned long)sig;
+ regs->dx = 0;
+ regs->cx = 0;
regs->ds = __USER_DS;
regs->es = __USER_DS;
@@ -407,15 +419,10 @@
* The tracer may want to single-step inside the
* handler too.
*/
- regs->flags &= ~(TF_MASK | X86_EFLAGS_DF);
+ regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
-#if DEBUG_SIG
- printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
- current->comm, current->pid, frame, regs->ip, frame->pretcode);
-#endif
-
return 0;
give_sigsegv:
@@ -424,10 +431,10 @@
}
static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs * regs)
+ sigset_t *set, struct pt_regs *regs)
{
- void __user *restorer;
struct rt_sigframe __user *frame;
+ void __user *restorer;
int err = 0;
int usig;
@@ -457,7 +464,7 @@
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
- regs, set->sig[0]);
+ regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
@@ -467,9 +474,9 @@
if (ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
err |= __put_user(restorer, &frame->pretcode);
-
+
/*
- * This is movl $,%ax ; int $0x80
+ * This is movl $__NR_rt_sigreturn, %ax ; int $0x80
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
@@ -483,11 +490,11 @@
goto give_sigsegv;
/* Set up registers for signal handler */
- regs->sp = (unsigned long) frame;
- regs->ip = (unsigned long) ka->sa.sa_handler;
- regs->ax = (unsigned long) usig;
- regs->dx = (unsigned long) &frame->info;
- regs->cx = (unsigned long) &frame->uc;
+ regs->sp = (unsigned long)frame;
+ regs->ip = (unsigned long)ka->sa.sa_handler;
+ regs->ax = (unsigned long)usig;
+ regs->dx = (unsigned long)&frame->info;
+ regs->cx = (unsigned long)&frame->uc;
regs->ds = __USER_DS;
regs->es = __USER_DS;
@@ -500,15 +507,10 @@
* The tracer may want to single-step inside the
* handler too.
*/
- regs->flags &= ~(TF_MASK | X86_EFLAGS_DF);
+ regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
-#if DEBUG_SIG
- printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
- current->comm, current->pid, frame, regs->ip, frame->pretcode);
-#endif
-
return 0;
give_sigsegv:
@@ -517,33 +519,33 @@
}
/*
- * OK, we're invoking a handler
- */
-
+ * OK, we're invoking a handler:
+ */
static int
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
- sigset_t *oldset, struct pt_regs * regs)
+ sigset_t *oldset, struct pt_regs *regs)
{
int ret;
/* Are we from a system call? */
- if (regs->orig_ax >= 0) {
+ if ((long)regs->orig_ax >= 0) {
/* If so, check system call restarting.. */
switch (regs->ax) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->ax = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ax = -EINTR;
break;
-
- case -ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- regs->ax = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- regs->ax = regs->orig_ax;
- regs->ip -= 2;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ regs->ax = regs->orig_ax;
+ regs->ip -= 2;
+ break;
}
}
@@ -561,16 +563,17 @@
else
ret = setup_frame(sig, ka, oldset, regs);
- if (ret == 0) {
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
- if (!(ka->sa.sa_flags & SA_NODEFER))
- sigaddset(¤t->blocked,sig);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- }
+ if (ret)
+ return ret;
- return ret;
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(¤t->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ return 0;
}
/*
@@ -580,18 +583,17 @@
*/
static void do_signal(struct pt_regs *regs)
{
+ struct k_sigaction ka;
siginfo_t info;
int signr;
- struct k_sigaction ka;
sigset_t *oldset;
/*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so. vm86 regs switched out by assembly code
- * before reaching here, so testing against kernel
- * CS suffices.
+ * We want the common case to go fast, which is why we may in certain
+ * cases get here from kernel mode. Just return without doing anything
+ * if so.
+ * X86_32: vm86 regs switched out by assembly code before reaching
+ * here, so testing against kernel CS suffices.
*/
if (!user_mode(regs))
return;
@@ -603,29 +605,31 @@
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
- /* Re-enable any watchpoints before delivering the
+ /*
+ * Re-enable any watchpoints before delivering the
* signal to user space. The processor register will
* have been cleared if the watchpoint triggered
* inside the kernel.
*/
- if (unlikely(current->thread.debugreg7))
+ if (current->thread.debugreg7)
set_debugreg(current->thread.debugreg7, 7);
- /* Whee! Actually deliver the signal. */
+ /* Whee! Actually deliver the signal. */
if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
- /* a signal was successfully delivered; the saved
+ /*
+ * a signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag */
+ * clear the TIF_RESTORE_SIGMASK flag
+ */
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
-
return;
}
/* Did we come from a system call? */
- if (regs->orig_ax >= 0) {
+ if ((long)regs->orig_ax >= 0) {
/* Restart the system call - no handlers present */
switch (regs->ax) {
case -ERESTARTNOHAND:
@@ -642,8 +646,10 @@
}
}
- /* if there's no signal to deliver, we just put the saved sigmask
- * back */
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back.
+ */
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
@@ -654,13 +660,12 @@
* notification of userspace execution resumption
* - triggered by the TIF_WORK_MASK flags
*/
-__attribute__((regparm(3)))
-void do_notify_resume(struct pt_regs *regs, void *_unused,
- __u32 thread_info_flags)
+void
+do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
{
/* Pending single-step? */
if (thread_info_flags & _TIF_SINGLESTEP) {
- regs->flags |= TF_MASK;
+ regs->flags |= X86_EFLAGS_TF;
clear_thread_flag(TIF_SINGLESTEP);
}
@@ -670,6 +675,6 @@
if (thread_info_flags & _TIF_HRTICK_RESCHED)
hrtick_resched();
-
+
clear_thread_flag(TIF_IRET);
}
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index 1c83e51..827179c 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -19,17 +19,28 @@
#include <linux/stddef.h>
#include <linux/personality.h>
#include <linux/compiler.h>
+#include <asm/processor.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/i387.h>
#include <asm/proto.h>
#include <asm/ia32_unistd.h>
#include <asm/mce.h>
-
-/* #define DEBUG_SIG 1 */
+#include "sigframe.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+#define __FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_OF | \
+ X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
+ X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
+ X86_EFLAGS_CF)
+
+#ifdef CONFIG_X86_32
+# define FIX_EFLAGS (__FIX_EFLAGS | X86_EFLAGS_RF)
+#else
+# define FIX_EFLAGS __FIX_EFLAGS
+#endif
+
int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs * regs);
int ia32_setup_frame(int sig, struct k_sigaction *ka,
@@ -46,16 +57,9 @@
/*
* Do a signal return; undo the signal stack.
*/
-
-struct rt_sigframe
-{
- char __user *pretcode;
- struct ucontext uc;
- struct siginfo info;
-};
-
static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned long *prax)
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
+ unsigned long *pax)
{
unsigned int err = 0;
@@ -87,7 +91,7 @@
{
unsigned int tmpflags;
err |= __get_user(tmpflags, &sc->flags);
- regs->flags = (regs->flags & ~0x40DD5) | (tmpflags & 0x40DD5);
+ regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
regs->orig_ax = -1; /* disable syscall checks */
}
@@ -108,7 +112,7 @@
}
}
- err |= __get_user(*prax, &sc->ax);
+ err |= __get_user(*pax, &sc->ax);
return err;
badframe:
@@ -121,13 +125,11 @@
sigset_t set;
unsigned long ax;
- frame = (struct rt_sigframe __user *)(regs->sp - 8);
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) {
+ frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
- }
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) {
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
- }
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(¤t->sighand->siglock);
@@ -138,10 +140,6 @@
if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
goto badframe;
-#ifdef DEBUG_SIG
- printk("%d sigreturn ip:%lx sp:%lx frame:%p ax:%lx\n",current->pid,regs->ip,regs->sp,frame,ax);
-#endif
-
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
goto badframe;
@@ -270,10 +268,6 @@
if (err)
goto give_sigsegv;
-#ifdef DEBUG_SIG
- printk("%d old ip %lx old sp %lx old ax %lx\n", current->pid,regs->ip,regs->sp,regs->ax);
-#endif
-
/* Set up registers for signal handler */
regs->di = sig;
/* In case the signal handler was declared without prototypes */
@@ -298,10 +292,6 @@
regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
-#ifdef DEBUG_SIG
- printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%p\n",
- current->comm, current->pid, frame, regs->ip, frame->pretcode);
-#endif
return 0;
@@ -345,35 +335,29 @@
static int
handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
- sigset_t *oldset, struct pt_regs *regs)
+ sigset_t *oldset, struct pt_regs *regs)
{
int ret;
-#ifdef DEBUG_SIG
- printk("handle_signal pid:%d sig:%lu ip:%lx sp:%lx regs=%p\n",
- current->pid, sig,
- regs->ip, regs->sp, regs);
-#endif
-
/* Are we from a system call? */
if (current_syscall(regs) >= 0) {
/* If so, check system call restarting.. */
switch (current_syscall_ret(regs)) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->ax = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ax = -EINTR;
break;
-
- case -ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- regs->ax = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- regs->ax = regs->orig_ax;
- regs->ip -= 2;
- break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ regs->ax = regs->orig_ax;
+ regs->ip -= 2;
+ break;
}
}
@@ -420,10 +404,11 @@
sigset_t *oldset;
/*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
+ * We want the common case to go fast, which is why we may in certain
+ * cases get here from kernel mode. Just return without doing anything
* if so.
+ * X86_32: vm86 regs switched out by assembly code before reaching
+ * here, so testing against kernel CS suffices.
*/
if (!user_mode(regs))
return;
@@ -473,22 +458,19 @@
}
}
- /* if there's no signal to deliver, we just put the saved sigmask
- back. */
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back.
+ */
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
-void
-do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, void *unused,
+ __u32 thread_info_flags)
{
-#ifdef DEBUG_SIG
- printk("do_notify_resume flags:%x ip:%lx sp:%lx caller:%p pending:%x\n",
- thread_info_flags, regs->ip, regs->sp, __builtin_return_address(0),signal_pending(current));
-#endif
-
/* Pending single-step? */
if (thread_info_flags & _TIF_SINGLESTEP) {
regs->flags |= X86_EFLAGS_TF;
@@ -502,7 +484,7 @@
#endif /* CONFIG_X86_MCE */
/* deal with pending signal delivery */
- if (thread_info_flags & (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK))
+ if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
do_signal(regs);
if (thread_info_flags & _TIF_HRTICK_RESCHED)
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
new file mode 100644
index 0000000..8f75893
--- /dev/null
+++ b/arch/x86/kernel/smp.c
@@ -0,0 +1,343 @@
+/*
+ * Intel SMP support routines.
+ *
+ * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
+ * (c) 2002,2003 Andi Kleen, SuSE Labs.
+ *
+ * i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com>
+ *
+ * This code is released under the GNU General Public License version 2 or
+ * later.
+ */
+
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <linux/cpu.h>
+
+#include <asm/mtrr.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/proto.h>
+#include <mach_ipi.h>
+#include <mach_apic.h>
+/*
+ * Some notes on x86 processor bugs affecting SMP operation:
+ *
+ * Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
+ * The Linux implications for SMP are handled as follows:
+ *
+ * Pentium III / [Xeon]
+ * None of the E1AP-E3AP errata are visible to the user.
+ *
+ * E1AP. see PII A1AP
+ * E2AP. see PII A2AP
+ * E3AP. see PII A3AP
+ *
+ * Pentium II / [Xeon]
+ * None of the A1AP-A3AP errata are visible to the user.
+ *
+ * A1AP. see PPro 1AP
+ * A2AP. see PPro 2AP
+ * A3AP. see PPro 7AP
+ *
+ * Pentium Pro
+ * None of 1AP-9AP errata are visible to the normal user,
+ * except occasional delivery of 'spurious interrupt' as trap #15.
+ * This is very rare and a non-problem.
+ *
+ * 1AP. Linux maps APIC as non-cacheable
+ * 2AP. worked around in hardware
+ * 3AP. fixed in C0 and above steppings microcode update.
+ * Linux does not use excessive STARTUP_IPIs.
+ * 4AP. worked around in hardware
+ * 5AP. symmetric IO mode (normal Linux operation) not affected.
+ * 'noapic' mode has vector 0xf filled out properly.
+ * 6AP. 'noapic' mode might be affected - fixed in later steppings
+ * 7AP. We do not assume writes to the LVT deassering IRQs
+ * 8AP. We do not enable low power mode (deep sleep) during MP bootup
+ * 9AP. We do not use mixed mode
+ *
+ * Pentium
+ * There is a marginal case where REP MOVS on 100MHz SMP
+ * machines with B stepping processors can fail. XXX should provide
+ * an L1cache=Writethrough or L1cache=off option.
+ *
+ * B stepping CPUs may hang. There are hardware work arounds
+ * for this. We warn about it in case your board doesn't have the work
+ * arounds. Basically that's so I can tell anyone with a B stepping
+ * CPU and SMP problems "tough".
+ *
+ * Specific items [From Pentium Processor Specification Update]
+ *
+ * 1AP. Linux doesn't use remote read
+ * 2AP. Linux doesn't trust APIC errors
+ * 3AP. We work around this
+ * 4AP. Linux never generated 3 interrupts of the same priority
+ * to cause a lost local interrupt.
+ * 5AP. Remote read is never used
+ * 6AP. not affected - worked around in hardware
+ * 7AP. not affected - worked around in hardware
+ * 8AP. worked around in hardware - we get explicit CS errors if not
+ * 9AP. only 'noapic' mode affected. Might generate spurious
+ * interrupts, we log only the first one and count the
+ * rest silently.
+ * 10AP. not affected - worked around in hardware
+ * 11AP. Linux reads the APIC between writes to avoid this, as per
+ * the documentation. Make sure you preserve this as it affects
+ * the C stepping chips too.
+ * 12AP. not affected - worked around in hardware
+ * 13AP. not affected - worked around in hardware
+ * 14AP. we always deassert INIT during bootup
+ * 15AP. not affected - worked around in hardware
+ * 16AP. not affected - worked around in hardware
+ * 17AP. not affected - worked around in hardware
+ * 18AP. not affected - worked around in hardware
+ * 19AP. not affected - worked around in BIOS
+ *
+ * If this sounds worrying believe me these bugs are either ___RARE___,
+ * or are signal timing bugs worked around in hardware and there's
+ * about nothing of note with C stepping upwards.
+ */
+
+/*
+ * this function sends a 'reschedule' IPI to another CPU.
+ * it goes straight through and wastes no time serializing
+ * anything. Worst case is that we lose a reschedule ...
+ */
+static void native_smp_send_reschedule(int cpu)
+{
+ if (unlikely(cpu_is_offline(cpu))) {
+ WARN_ON(1);
+ return;
+ }
+ send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
+}
+
+/*
+ * Structure and data for smp_call_function(). This is designed to minimise
+ * static memory requirements. It also looks cleaner.
+ */
+static DEFINE_SPINLOCK(call_lock);
+
+struct call_data_struct {
+ void (*func) (void *info);
+ void *info;
+ atomic_t started;
+ atomic_t finished;
+ int wait;
+};
+
+void lock_ipi_call_lock(void)
+{
+ spin_lock_irq(&call_lock);
+}
+
+void unlock_ipi_call_lock(void)
+{
+ spin_unlock_irq(&call_lock);
+}
+
+static struct call_data_struct *call_data;
+
+static void __smp_call_function(void (*func) (void *info), void *info,
+ int nonatomic, int wait)
+{
+ struct call_data_struct data;
+ int cpus = num_online_cpus() - 1;
+
+ if (!cpus)
+ return;
+
+ data.func = func;
+ data.info = info;
+ atomic_set(&data.started, 0);
+ data.wait = wait;
+ if (wait)
+ atomic_set(&data.finished, 0);
+
+ call_data = &data;
+ mb();
+
+ /* Send a message to all other CPUs and wait for them to respond */
+ send_IPI_allbutself(CALL_FUNCTION_VECTOR);
+
+ /* Wait for response */
+ while (atomic_read(&data.started) != cpus)
+ cpu_relax();
+
+ if (wait)
+ while (atomic_read(&data.finished) != cpus)
+ cpu_relax();
+}
+
+
+/**
+ * smp_call_function_mask(): Run a function on a set of other CPUs.
+ * @mask: The set of cpus to run on. Must not include the current cpu.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @wait: If true, wait (atomically) until function has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+static int
+native_smp_call_function_mask(cpumask_t mask,
+ void (*func)(void *), void *info,
+ int wait)
+{
+ struct call_data_struct data;
+ cpumask_t allbutself;
+ int cpus;
+
+ /* Can deadlock when called with interrupts disabled */
+ WARN_ON(irqs_disabled());
+
+ /* Holding any lock stops cpus from going down. */
+ spin_lock(&call_lock);
+
+ allbutself = cpu_online_map;
+ cpu_clear(smp_processor_id(), allbutself);
+
+ cpus_and(mask, mask, allbutself);
+ cpus = cpus_weight(mask);
+
+ if (!cpus) {
+ spin_unlock(&call_lock);
+ return 0;
+ }
+
+ data.func = func;
+ data.info = info;
+ atomic_set(&data.started, 0);
+ data.wait = wait;
+ if (wait)
+ atomic_set(&data.finished, 0);
+
+ call_data = &data;
+ wmb();
+
+ /* Send a message to other CPUs */
+ if (cpus_equal(mask, allbutself))
+ send_IPI_allbutself(CALL_FUNCTION_VECTOR);
+ else
+ send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
+
+ /* Wait for response */
+ while (atomic_read(&data.started) != cpus)
+ cpu_relax();
+
+ if (wait)
+ while (atomic_read(&data.finished) != cpus)
+ cpu_relax();
+ spin_unlock(&call_lock);
+
+ return 0;
+}
+
+static void stop_this_cpu(void *dummy)
+{
+ local_irq_disable();
+ /*
+ * Remove this CPU:
+ */
+ cpu_clear(smp_processor_id(), cpu_online_map);
+ disable_local_APIC();
+ if (hlt_works(smp_processor_id()))
+ for (;;) halt();
+ for (;;);
+}
+
+/*
+ * this function calls the 'stop' function on all other CPUs in the system.
+ */
+
+static void native_smp_send_stop(void)
+{
+ int nolock;
+ unsigned long flags;
+
+ if (reboot_force)
+ return;
+
+ /* Don't deadlock on the call lock in panic */
+ nolock = !spin_trylock(&call_lock);
+ local_irq_save(flags);
+ __smp_call_function(stop_this_cpu, NULL, 0, 0);
+ if (!nolock)
+ spin_unlock(&call_lock);
+ disable_local_APIC();
+ local_irq_restore(flags);
+}
+
+/*
+ * Reschedule call back. Nothing to do,
+ * all the work is done automatically when
+ * we return from the interrupt.
+ */
+void smp_reschedule_interrupt(struct pt_regs *regs)
+{
+ ack_APIC_irq();
+#ifdef CONFIG_X86_32
+ __get_cpu_var(irq_stat).irq_resched_count++;
+#else
+ add_pda(irq_resched_count, 1);
+#endif
+}
+
+void smp_call_function_interrupt(struct pt_regs *regs)
+{
+ void (*func) (void *info) = call_data->func;
+ void *info = call_data->info;
+ int wait = call_data->wait;
+
+ ack_APIC_irq();
+ /*
+ * Notify initiating CPU that I've grabbed the data and am
+ * about to execute the function
+ */
+ mb();
+ atomic_inc(&call_data->started);
+ /*
+ * At this point the info structure may be out of scope unless wait==1
+ */
+ irq_enter();
+ (*func)(info);
+#ifdef CONFIG_X86_32
+ __get_cpu_var(irq_stat).irq_call_count++;
+#else
+ add_pda(irq_call_count, 1);
+#endif
+ irq_exit();
+
+ if (wait) {
+ mb();
+ atomic_inc(&call_data->finished);
+ }
+}
+
+struct smp_ops smp_ops = {
+ .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
+ .smp_prepare_cpus = native_smp_prepare_cpus,
+ .cpu_up = native_cpu_up,
+ .smp_cpus_done = native_smp_cpus_done,
+
+ .smp_send_stop = native_smp_send_stop,
+ .smp_send_reschedule = native_smp_send_reschedule,
+ .smp_call_function_mask = native_smp_call_function_mask,
+};
+EXPORT_SYMBOL_GPL(smp_ops);
+
diff --git a/arch/x86/kernel/smp_32.c b/arch/x86/kernel/smp_32.c
deleted file mode 100644
index dc0cde9..0000000
--- a/arch/x86/kernel/smp_32.c
+++ /dev/null
@@ -1,712 +0,0 @@
-/*
- * Intel SMP support routines.
- *
- * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
- *
- * This code is released under the GNU General Public License version 2 or
- * later.
- */
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <linux/cpu.h>
-#include <linux/module.h>
-
-#include <asm/mtrr.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <mach_apic.h>
-
-/*
- * Some notes on x86 processor bugs affecting SMP operation:
- *
- * Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
- * The Linux implications for SMP are handled as follows:
- *
- * Pentium III / [Xeon]
- * None of the E1AP-E3AP errata are visible to the user.
- *
- * E1AP. see PII A1AP
- * E2AP. see PII A2AP
- * E3AP. see PII A3AP
- *
- * Pentium II / [Xeon]
- * None of the A1AP-A3AP errata are visible to the user.
- *
- * A1AP. see PPro 1AP
- * A2AP. see PPro 2AP
- * A3AP. see PPro 7AP
- *
- * Pentium Pro
- * None of 1AP-9AP errata are visible to the normal user,
- * except occasional delivery of 'spurious interrupt' as trap #15.
- * This is very rare and a non-problem.
- *
- * 1AP. Linux maps APIC as non-cacheable
- * 2AP. worked around in hardware
- * 3AP. fixed in C0 and above steppings microcode update.
- * Linux does not use excessive STARTUP_IPIs.
- * 4AP. worked around in hardware
- * 5AP. symmetric IO mode (normal Linux operation) not affected.
- * 'noapic' mode has vector 0xf filled out properly.
- * 6AP. 'noapic' mode might be affected - fixed in later steppings
- * 7AP. We do not assume writes to the LVT deassering IRQs
- * 8AP. We do not enable low power mode (deep sleep) during MP bootup
- * 9AP. We do not use mixed mode
- *
- * Pentium
- * There is a marginal case where REP MOVS on 100MHz SMP
- * machines with B stepping processors can fail. XXX should provide
- * an L1cache=Writethrough or L1cache=off option.
- *
- * B stepping CPUs may hang. There are hardware work arounds
- * for this. We warn about it in case your board doesn't have the work
- * arounds. Basically that's so I can tell anyone with a B stepping
- * CPU and SMP problems "tough".
- *
- * Specific items [From Pentium Processor Specification Update]
- *
- * 1AP. Linux doesn't use remote read
- * 2AP. Linux doesn't trust APIC errors
- * 3AP. We work around this
- * 4AP. Linux never generated 3 interrupts of the same priority
- * to cause a lost local interrupt.
- * 5AP. Remote read is never used
- * 6AP. not affected - worked around in hardware
- * 7AP. not affected - worked around in hardware
- * 8AP. worked around in hardware - we get explicit CS errors if not
- * 9AP. only 'noapic' mode affected. Might generate spurious
- * interrupts, we log only the first one and count the
- * rest silently.
- * 10AP. not affected - worked around in hardware
- * 11AP. Linux reads the APIC between writes to avoid this, as per
- * the documentation. Make sure you preserve this as it affects
- * the C stepping chips too.
- * 12AP. not affected - worked around in hardware
- * 13AP. not affected - worked around in hardware
- * 14AP. we always deassert INIT during bootup
- * 15AP. not affected - worked around in hardware
- * 16AP. not affected - worked around in hardware
- * 17AP. not affected - worked around in hardware
- * 18AP. not affected - worked around in hardware
- * 19AP. not affected - worked around in BIOS
- *
- * If this sounds worrying believe me these bugs are either ___RARE___,
- * or are signal timing bugs worked around in hardware and there's
- * about nothing of note with C stepping upwards.
- */
-
-DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0, };
-
-/*
- * the following functions deal with sending IPIs between CPUs.
- *
- * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
- */
-
-static inline int __prepare_ICR (unsigned int shortcut, int vector)
-{
- unsigned int icr = shortcut | APIC_DEST_LOGICAL;
-
- switch (vector) {
- default:
- icr |= APIC_DM_FIXED | vector;
- break;
- case NMI_VECTOR:
- icr |= APIC_DM_NMI;
- break;
- }
- return icr;
-}
-
-static inline int __prepare_ICR2 (unsigned int mask)
-{
- return SET_APIC_DEST_FIELD(mask);
-}
-
-void __send_IPI_shortcut(unsigned int shortcut, int vector)
-{
- /*
- * Subtle. In the case of the 'never do double writes' workaround
- * we have to lock out interrupts to be safe. As we don't care
- * of the value read we use an atomic rmw access to avoid costly
- * cli/sti. Otherwise we use an even cheaper single atomic write
- * to the APIC.
- */
- unsigned int cfg;
-
- /*
- * Wait for idle.
- */
- apic_wait_icr_idle();
-
- /*
- * No need to touch the target chip field
- */
- cfg = __prepare_ICR(shortcut, vector);
-
- /*
- * Send the IPI. The write to APIC_ICR fires this off.
- */
- apic_write_around(APIC_ICR, cfg);
-}
-
-void send_IPI_self(int vector)
-{
- __send_IPI_shortcut(APIC_DEST_SELF, vector);
-}
-
-/*
- * This is used to send an IPI with no shorthand notation (the destination is
- * specified in bits 56 to 63 of the ICR).
- */
-static inline void __send_IPI_dest_field(unsigned long mask, int vector)
-{
- unsigned long cfg;
-
- /*
- * Wait for idle.
- */
- if (unlikely(vector == NMI_VECTOR))
- safe_apic_wait_icr_idle();
- else
- apic_wait_icr_idle();
-
- /*
- * prepare target chip field
- */
- cfg = __prepare_ICR2(mask);
- apic_write_around(APIC_ICR2, cfg);
-
- /*
- * program the ICR
- */
- cfg = __prepare_ICR(0, vector);
-
- /*
- * Send the IPI. The write to APIC_ICR fires this off.
- */
- apic_write_around(APIC_ICR, cfg);
-}
-
-/*
- * This is only used on smaller machines.
- */
-void send_IPI_mask_bitmask(cpumask_t cpumask, int vector)
-{
- unsigned long mask = cpus_addr(cpumask)[0];
- unsigned long flags;
-
- local_irq_save(flags);
- WARN_ON(mask & ~cpus_addr(cpu_online_map)[0]);
- __send_IPI_dest_field(mask, vector);
- local_irq_restore(flags);
-}
-
-void send_IPI_mask_sequence(cpumask_t mask, int vector)
-{
- unsigned long flags;
- unsigned int query_cpu;
-
- /*
- * Hack. The clustered APIC addressing mode doesn't allow us to send
- * to an arbitrary mask, so I do a unicasts to each CPU instead. This
- * should be modified to do 1 message per cluster ID - mbligh
- */
-
- local_irq_save(flags);
- for_each_possible_cpu(query_cpu) {
- if (cpu_isset(query_cpu, mask)) {
- __send_IPI_dest_field(cpu_to_logical_apicid(query_cpu),
- vector);
- }
- }
- local_irq_restore(flags);
-}
-
-#include <mach_ipi.h> /* must come after the send_IPI functions above for inlining */
-
-/*
- * Smarter SMP flushing macros.
- * c/o Linus Torvalds.
- *
- * These mean you can really definitely utterly forget about
- * writing to user space from interrupts. (Its not allowed anyway).
- *
- * Optimizations Manfred Spraul <manfred@colorfullife.com>
- */
-
-static cpumask_t flush_cpumask;
-static struct mm_struct * flush_mm;
-static unsigned long flush_va;
-static DEFINE_SPINLOCK(tlbstate_lock);
-
-/*
- * We cannot call mmdrop() because we are in interrupt context,
- * instead update mm->cpu_vm_mask.
- *
- * We need to reload %cr3 since the page tables may be going
- * away from under us..
- */
-void leave_mm(int cpu)
-{
- if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
- BUG();
- cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask);
- load_cr3(swapper_pg_dir);
-}
-EXPORT_SYMBOL_GPL(leave_mm);
-
-/*
- *
- * The flush IPI assumes that a thread switch happens in this order:
- * [cpu0: the cpu that switches]
- * 1) switch_mm() either 1a) or 1b)
- * 1a) thread switch to a different mm
- * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
- * Stop ipi delivery for the old mm. This is not synchronized with
- * the other cpus, but smp_invalidate_interrupt ignore flush ipis
- * for the wrong mm, and in the worst case we perform a superfluous
- * tlb flush.
- * 1a2) set cpu_tlbstate to TLBSTATE_OK
- * Now the smp_invalidate_interrupt won't call leave_mm if cpu0
- * was in lazy tlb mode.
- * 1a3) update cpu_tlbstate[].active_mm
- * Now cpu0 accepts tlb flushes for the new mm.
- * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
- * Now the other cpus will send tlb flush ipis.
- * 1a4) change cr3.
- * 1b) thread switch without mm change
- * cpu_tlbstate[].active_mm is correct, cpu0 already handles
- * flush ipis.
- * 1b1) set cpu_tlbstate to TLBSTATE_OK
- * 1b2) test_and_set the cpu bit in cpu_vm_mask.
- * Atomically set the bit [other cpus will start sending flush ipis],
- * and test the bit.
- * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
- * 2) switch %%esp, ie current
- *
- * The interrupt must handle 2 special cases:
- * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
- * - the cpu performs speculative tlb reads, i.e. even if the cpu only
- * runs in kernel space, the cpu could load tlb entries for user space
- * pages.
- *
- * The good news is that cpu_tlbstate is local to each cpu, no
- * write/read ordering problems.
- */
-
-/*
- * TLB flush IPI:
- *
- * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
- * 2) Leave the mm if we are in the lazy tlb mode.
- */
-
-void smp_invalidate_interrupt(struct pt_regs *regs)
-{
- unsigned long cpu;
-
- cpu = get_cpu();
-
- if (!cpu_isset(cpu, flush_cpumask))
- goto out;
- /*
- * This was a BUG() but until someone can quote me the
- * line from the intel manual that guarantees an IPI to
- * multiple CPUs is retried _only_ on the erroring CPUs
- * its staying as a return
- *
- * BUG();
- */
-
- if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) {
- if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) {
- if (flush_va == TLB_FLUSH_ALL)
- local_flush_tlb();
- else
- __flush_tlb_one(flush_va);
- } else
- leave_mm(cpu);
- }
- ack_APIC_irq();
- smp_mb__before_clear_bit();
- cpu_clear(cpu, flush_cpumask);
- smp_mb__after_clear_bit();
-out:
- put_cpu_no_resched();
- __get_cpu_var(irq_stat).irq_tlb_count++;
-}
-
-void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
- unsigned long va)
-{
- cpumask_t cpumask = *cpumaskp;
-
- /*
- * A couple of (to be removed) sanity checks:
- *
- * - current CPU must not be in mask
- * - mask must exist :)
- */
- BUG_ON(cpus_empty(cpumask));
- BUG_ON(cpu_isset(smp_processor_id(), cpumask));
- BUG_ON(!mm);
-
-#ifdef CONFIG_HOTPLUG_CPU
- /* If a CPU which we ran on has gone down, OK. */
- cpus_and(cpumask, cpumask, cpu_online_map);
- if (unlikely(cpus_empty(cpumask)))
- return;
-#endif
-
- /*
- * i'm not happy about this global shared spinlock in the
- * MM hot path, but we'll see how contended it is.
- * AK: x86-64 has a faster method that could be ported.
- */
- spin_lock(&tlbstate_lock);
-
- flush_mm = mm;
- flush_va = va;
- cpus_or(flush_cpumask, cpumask, flush_cpumask);
- /*
- * We have to send the IPI only to
- * CPUs affected.
- */
- send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR);
-
- while (!cpus_empty(flush_cpumask))
- /* nothing. lockup detection does not belong here */
- cpu_relax();
-
- flush_mm = NULL;
- flush_va = 0;
- spin_unlock(&tlbstate_lock);
-}
-
-void flush_tlb_current_task(void)
-{
- struct mm_struct *mm = current->mm;
- cpumask_t cpu_mask;
-
- preempt_disable();
- cpu_mask = mm->cpu_vm_mask;
- cpu_clear(smp_processor_id(), cpu_mask);
-
- local_flush_tlb();
- if (!cpus_empty(cpu_mask))
- flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
- preempt_enable();
-}
-
-void flush_tlb_mm (struct mm_struct * mm)
-{
- cpumask_t cpu_mask;
-
- preempt_disable();
- cpu_mask = mm->cpu_vm_mask;
- cpu_clear(smp_processor_id(), cpu_mask);
-
- if (current->active_mm == mm) {
- if (current->mm)
- local_flush_tlb();
- else
- leave_mm(smp_processor_id());
- }
- if (!cpus_empty(cpu_mask))
- flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
-
- preempt_enable();
-}
-
-void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
-{
- struct mm_struct *mm = vma->vm_mm;
- cpumask_t cpu_mask;
-
- preempt_disable();
- cpu_mask = mm->cpu_vm_mask;
- cpu_clear(smp_processor_id(), cpu_mask);
-
- if (current->active_mm == mm) {
- if(current->mm)
- __flush_tlb_one(va);
- else
- leave_mm(smp_processor_id());
- }
-
- if (!cpus_empty(cpu_mask))
- flush_tlb_others(cpu_mask, mm, va);
-
- preempt_enable();
-}
-EXPORT_SYMBOL(flush_tlb_page);
-
-static void do_flush_tlb_all(void* info)
-{
- unsigned long cpu = smp_processor_id();
-
- __flush_tlb_all();
- if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY)
- leave_mm(cpu);
-}
-
-void flush_tlb_all(void)
-{
- on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
-}
-
-/*
- * this function sends a 'reschedule' IPI to another CPU.
- * it goes straight through and wastes no time serializing
- * anything. Worst case is that we lose a reschedule ...
- */
-static void native_smp_send_reschedule(int cpu)
-{
- WARN_ON(cpu_is_offline(cpu));
- send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
-}
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
- void (*func) (void *info);
- void *info;
- atomic_t started;
- atomic_t finished;
- int wait;
-};
-
-void lock_ipi_call_lock(void)
-{
- spin_lock_irq(&call_lock);
-}
-
-void unlock_ipi_call_lock(void)
-{
- spin_unlock_irq(&call_lock);
-}
-
-static struct call_data_struct *call_data;
-
-static void __smp_call_function(void (*func) (void *info), void *info,
- int nonatomic, int wait)
-{
- struct call_data_struct data;
- int cpus = num_online_cpus() - 1;
-
- if (!cpus)
- return;
-
- data.func = func;
- data.info = info;
- atomic_set(&data.started, 0);
- data.wait = wait;
- if (wait)
- atomic_set(&data.finished, 0);
-
- call_data = &data;
- mb();
-
- /* Send a message to all other CPUs and wait for them to respond */
- send_IPI_allbutself(CALL_FUNCTION_VECTOR);
-
- /* Wait for response */
- while (atomic_read(&data.started) != cpus)
- cpu_relax();
-
- if (wait)
- while (atomic_read(&data.finished) != cpus)
- cpu_relax();
-}
-
-
-/**
- * smp_call_function_mask(): Run a function on a set of other CPUs.
- * @mask: The set of cpus to run on. Must not include the current cpu.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-static int
-native_smp_call_function_mask(cpumask_t mask,
- void (*func)(void *), void *info,
- int wait)
-{
- struct call_data_struct data;
- cpumask_t allbutself;
- int cpus;
-
- /* Can deadlock when called with interrupts disabled */
- WARN_ON(irqs_disabled());
-
- /* Holding any lock stops cpus from going down. */
- spin_lock(&call_lock);
-
- allbutself = cpu_online_map;
- cpu_clear(smp_processor_id(), allbutself);
-
- cpus_and(mask, mask, allbutself);
- cpus = cpus_weight(mask);
-
- if (!cpus) {
- spin_unlock(&call_lock);
- return 0;
- }
-
- data.func = func;
- data.info = info;
- atomic_set(&data.started, 0);
- data.wait = wait;
- if (wait)
- atomic_set(&data.finished, 0);
-
- call_data = &data;
- mb();
-
- /* Send a message to other CPUs */
- if (cpus_equal(mask, allbutself))
- send_IPI_allbutself(CALL_FUNCTION_VECTOR);
- else
- send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
-
- /* Wait for response */
- while (atomic_read(&data.started) != cpus)
- cpu_relax();
-
- if (wait)
- while (atomic_read(&data.finished) != cpus)
- cpu_relax();
- spin_unlock(&call_lock);
-
- return 0;
-}
-
-static void stop_this_cpu (void * dummy)
-{
- local_irq_disable();
- /*
- * Remove this CPU:
- */
- cpu_clear(smp_processor_id(), cpu_online_map);
- disable_local_APIC();
- if (cpu_data(smp_processor_id()).hlt_works_ok)
- for(;;) halt();
- for (;;);
-}
-
-/*
- * this function calls the 'stop' function on all other CPUs in the system.
- */
-
-static void native_smp_send_stop(void)
-{
- /* Don't deadlock on the call lock in panic */
- int nolock = !spin_trylock(&call_lock);
- unsigned long flags;
-
- local_irq_save(flags);
- __smp_call_function(stop_this_cpu, NULL, 0, 0);
- if (!nolock)
- spin_unlock(&call_lock);
- disable_local_APIC();
- local_irq_restore(flags);
-}
-
-/*
- * Reschedule call back. Nothing to do,
- * all the work is done automatically when
- * we return from the interrupt.
- */
-void smp_reschedule_interrupt(struct pt_regs *regs)
-{
- ack_APIC_irq();
- __get_cpu_var(irq_stat).irq_resched_count++;
-}
-
-void smp_call_function_interrupt(struct pt_regs *regs)
-{
- void (*func) (void *info) = call_data->func;
- void *info = call_data->info;
- int wait = call_data->wait;
-
- ack_APIC_irq();
- /*
- * Notify initiating CPU that I've grabbed the data and am
- * about to execute the function
- */
- mb();
- atomic_inc(&call_data->started);
- /*
- * At this point the info structure may be out of scope unless wait==1
- */
- irq_enter();
- (*func)(info);
- __get_cpu_var(irq_stat).irq_call_count++;
- irq_exit();
-
- if (wait) {
- mb();
- atomic_inc(&call_data->finished);
- }
-}
-
-static int convert_apicid_to_cpu(int apic_id)
-{
- int i;
-
- for_each_possible_cpu(i) {
- if (per_cpu(x86_cpu_to_apicid, i) == apic_id)
- return i;
- }
- return -1;
-}
-
-int safe_smp_processor_id(void)
-{
- int apicid, cpuid;
-
- if (!boot_cpu_has(X86_FEATURE_APIC))
- return 0;
-
- apicid = hard_smp_processor_id();
- if (apicid == BAD_APICID)
- return 0;
-
- cpuid = convert_apicid_to_cpu(apicid);
-
- return cpuid >= 0 ? cpuid : 0;
-}
-
-struct smp_ops smp_ops = {
- .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
- .smp_prepare_cpus = native_smp_prepare_cpus,
- .cpu_up = native_cpu_up,
- .smp_cpus_done = native_smp_cpus_done,
-
- .smp_send_stop = native_smp_send_stop,
- .smp_send_reschedule = native_smp_send_reschedule,
- .smp_call_function_mask = native_smp_call_function_mask,
-};
-EXPORT_SYMBOL_GPL(smp_ops);
diff --git a/arch/x86/kernel/smp_64.c b/arch/x86/kernel/smp_64.c
deleted file mode 100644
index 2fd74b0..0000000
--- a/arch/x86/kernel/smp_64.c
+++ /dev/null
@@ -1,530 +0,0 @@
-/*
- * Intel SMP support routines.
- *
- * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- * (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
- * (c) 2002,2003 Andi Kleen, SuSE Labs.
- *
- * This code is released under the GNU General Public License version 2 or
- * later.
- */
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/smp.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/interrupt.h>
-
-#include <asm/mtrr.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm/mach_apic.h>
-#include <asm/mmu_context.h>
-#include <asm/proto.h>
-#include <asm/apicdef.h>
-#include <asm/idle.h>
-
-/*
- * Smarter SMP flushing macros.
- * c/o Linus Torvalds.
- *
- * These mean you can really definitely utterly forget about
- * writing to user space from interrupts. (Its not allowed anyway).
- *
- * Optimizations Manfred Spraul <manfred@colorfullife.com>
- *
- * More scalable flush, from Andi Kleen
- *
- * To avoid global state use 8 different call vectors.
- * Each CPU uses a specific vector to trigger flushes on other
- * CPUs. Depending on the received vector the target CPUs look into
- * the right per cpu variable for the flush data.
- *
- * With more than 8 CPUs they are hashed to the 8 available
- * vectors. The limited global vector space forces us to this right now.
- * In future when interrupts are split into per CPU domains this could be
- * fixed, at the cost of triggering multiple IPIs in some cases.
- */
-
-union smp_flush_state {
- struct {
- cpumask_t flush_cpumask;
- struct mm_struct *flush_mm;
- unsigned long flush_va;
- spinlock_t tlbstate_lock;
- };
- char pad[SMP_CACHE_BYTES];
-} ____cacheline_aligned;
-
-/* State is put into the per CPU data section, but padded
- to a full cache line because other CPUs can access it and we don't
- want false sharing in the per cpu data segment. */
-static DEFINE_PER_CPU(union smp_flush_state, flush_state);
-
-/*
- * We cannot call mmdrop() because we are in interrupt context,
- * instead update mm->cpu_vm_mask.
- */
-void leave_mm(int cpu)
-{
- if (read_pda(mmu_state) == TLBSTATE_OK)
- BUG();
- cpu_clear(cpu, read_pda(active_mm)->cpu_vm_mask);
- load_cr3(swapper_pg_dir);
-}
-EXPORT_SYMBOL_GPL(leave_mm);
-
-/*
- *
- * The flush IPI assumes that a thread switch happens in this order:
- * [cpu0: the cpu that switches]
- * 1) switch_mm() either 1a) or 1b)
- * 1a) thread switch to a different mm
- * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
- * Stop ipi delivery for the old mm. This is not synchronized with
- * the other cpus, but smp_invalidate_interrupt ignore flush ipis
- * for the wrong mm, and in the worst case we perform a superfluous
- * tlb flush.
- * 1a2) set cpu mmu_state to TLBSTATE_OK
- * Now the smp_invalidate_interrupt won't call leave_mm if cpu0
- * was in lazy tlb mode.
- * 1a3) update cpu active_mm
- * Now cpu0 accepts tlb flushes for the new mm.
- * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
- * Now the other cpus will send tlb flush ipis.
- * 1a4) change cr3.
- * 1b) thread switch without mm change
- * cpu active_mm is correct, cpu0 already handles
- * flush ipis.
- * 1b1) set cpu mmu_state to TLBSTATE_OK
- * 1b2) test_and_set the cpu bit in cpu_vm_mask.
- * Atomically set the bit [other cpus will start sending flush ipis],
- * and test the bit.
- * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
- * 2) switch %%esp, ie current
- *
- * The interrupt must handle 2 special cases:
- * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
- * - the cpu performs speculative tlb reads, i.e. even if the cpu only
- * runs in kernel space, the cpu could load tlb entries for user space
- * pages.
- *
- * The good news is that cpu mmu_state is local to each cpu, no
- * write/read ordering problems.
- */
-
-/*
- * TLB flush IPI:
- *
- * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
- * 2) Leave the mm if we are in the lazy tlb mode.
- *
- * Interrupts are disabled.
- */
-
-asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
-{
- int cpu;
- int sender;
- union smp_flush_state *f;
-
- cpu = smp_processor_id();
- /*
- * orig_rax contains the negated interrupt vector.
- * Use that to determine where the sender put the data.
- */
- sender = ~regs->orig_ax - INVALIDATE_TLB_VECTOR_START;
- f = &per_cpu(flush_state, sender);
-
- if (!cpu_isset(cpu, f->flush_cpumask))
- goto out;
- /*
- * This was a BUG() but until someone can quote me the
- * line from the intel manual that guarantees an IPI to
- * multiple CPUs is retried _only_ on the erroring CPUs
- * its staying as a return
- *
- * BUG();
- */
-
- if (f->flush_mm == read_pda(active_mm)) {
- if (read_pda(mmu_state) == TLBSTATE_OK) {
- if (f->flush_va == TLB_FLUSH_ALL)
- local_flush_tlb();
- else
- __flush_tlb_one(f->flush_va);
- } else
- leave_mm(cpu);
- }
-out:
- ack_APIC_irq();
- cpu_clear(cpu, f->flush_cpumask);
- add_pda(irq_tlb_count, 1);
-}
-
-void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
- unsigned long va)
-{
- int sender;
- union smp_flush_state *f;
- cpumask_t cpumask = *cpumaskp;
-
- /* Caller has disabled preemption */
- sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
- f = &per_cpu(flush_state, sender);
-
- /*
- * Could avoid this lock when
- * num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is
- * probably not worth checking this for a cache-hot lock.
- */
- spin_lock(&f->tlbstate_lock);
-
- f->flush_mm = mm;
- f->flush_va = va;
- cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask);
-
- /*
- * We have to send the IPI only to
- * CPUs affected.
- */
- send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR_START + sender);
-
- while (!cpus_empty(f->flush_cpumask))
- cpu_relax();
-
- f->flush_mm = NULL;
- f->flush_va = 0;
- spin_unlock(&f->tlbstate_lock);
-}
-
-int __cpuinit init_smp_flush(void)
-{
- int i;
-
- for_each_cpu_mask(i, cpu_possible_map) {
- spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock);
- }
- return 0;
-}
-core_initcall(init_smp_flush);
-
-void flush_tlb_current_task(void)
-{
- struct mm_struct *mm = current->mm;
- cpumask_t cpu_mask;
-
- preempt_disable();
- cpu_mask = mm->cpu_vm_mask;
- cpu_clear(smp_processor_id(), cpu_mask);
-
- local_flush_tlb();
- if (!cpus_empty(cpu_mask))
- flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
- preempt_enable();
-}
-
-void flush_tlb_mm (struct mm_struct * mm)
-{
- cpumask_t cpu_mask;
-
- preempt_disable();
- cpu_mask = mm->cpu_vm_mask;
- cpu_clear(smp_processor_id(), cpu_mask);
-
- if (current->active_mm == mm) {
- if (current->mm)
- local_flush_tlb();
- else
- leave_mm(smp_processor_id());
- }
- if (!cpus_empty(cpu_mask))
- flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
-
- preempt_enable();
-}
-
-void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
-{
- struct mm_struct *mm = vma->vm_mm;
- cpumask_t cpu_mask;
-
- preempt_disable();
- cpu_mask = mm->cpu_vm_mask;
- cpu_clear(smp_processor_id(), cpu_mask);
-
- if (current->active_mm == mm) {
- if(current->mm)
- __flush_tlb_one(va);
- else
- leave_mm(smp_processor_id());
- }
-
- if (!cpus_empty(cpu_mask))
- flush_tlb_others(cpu_mask, mm, va);
-
- preempt_enable();
-}
-
-static void do_flush_tlb_all(void* info)
-{
- unsigned long cpu = smp_processor_id();
-
- __flush_tlb_all();
- if (read_pda(mmu_state) == TLBSTATE_LAZY)
- leave_mm(cpu);
-}
-
-void flush_tlb_all(void)
-{
- on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
-}
-
-/*
- * this function sends a 'reschedule' IPI to another CPU.
- * it goes straight through and wastes no time serializing
- * anything. Worst case is that we lose a reschedule ...
- */
-
-void smp_send_reschedule(int cpu)
-{
- send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
-}
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
- void (*func) (void *info);
- void *info;
- atomic_t started;
- atomic_t finished;
- int wait;
-};
-
-static struct call_data_struct * call_data;
-
-void lock_ipi_call_lock(void)
-{
- spin_lock_irq(&call_lock);
-}
-
-void unlock_ipi_call_lock(void)
-{
- spin_unlock_irq(&call_lock);
-}
-
-/*
- * this function sends a 'generic call function' IPI to all other CPU
- * of the system defined in the mask.
- */
-static int __smp_call_function_mask(cpumask_t mask,
- void (*func)(void *), void *info,
- int wait)
-{
- struct call_data_struct data;
- cpumask_t allbutself;
- int cpus;
-
- allbutself = cpu_online_map;
- cpu_clear(smp_processor_id(), allbutself);
-
- cpus_and(mask, mask, allbutself);
- cpus = cpus_weight(mask);
-
- if (!cpus)
- return 0;
-
- data.func = func;
- data.info = info;
- atomic_set(&data.started, 0);
- data.wait = wait;
- if (wait)
- atomic_set(&data.finished, 0);
-
- call_data = &data;
- wmb();
-
- /* Send a message to other CPUs */
- if (cpus_equal(mask, allbutself))
- send_IPI_allbutself(CALL_FUNCTION_VECTOR);
- else
- send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
-
- /* Wait for response */
- while (atomic_read(&data.started) != cpus)
- cpu_relax();
-
- if (!wait)
- return 0;
-
- while (atomic_read(&data.finished) != cpus)
- cpu_relax();
-
- return 0;
-}
-/**
- * smp_call_function_mask(): Run a function on a set of other CPUs.
- * @mask: The set of cpus to run on. Must not include the current cpu.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function_mask(cpumask_t mask,
- void (*func)(void *), void *info,
- int wait)
-{
- int ret;
-
- /* Can deadlock when called with interrupts disabled */
- WARN_ON(irqs_disabled());
-
- spin_lock(&call_lock);
- ret = __smp_call_function_mask(mask, func, info, wait);
- spin_unlock(&call_lock);
- return ret;
-}
-EXPORT_SYMBOL(smp_call_function_mask);
-
-/*
- * smp_call_function_single - Run a function on a specific CPU
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Currently unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Retrurns 0 on success, else a negative status code.
- *
- * Does not return until the remote CPU is nearly ready to execute <func>
- * or is or has executed.
- */
-
-int smp_call_function_single (int cpu, void (*func) (void *info), void *info,
- int nonatomic, int wait)
-{
- /* prevent preemption and reschedule on another processor */
- int ret, me = get_cpu();
-
- /* Can deadlock when called with interrupts disabled */
- WARN_ON(irqs_disabled());
-
- if (cpu == me) {
- local_irq_disable();
- func(info);
- local_irq_enable();
- put_cpu();
- return 0;
- }
-
- ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
-
- put_cpu();
- return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
-/*
- * smp_call_function - run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: currently unused.
- * @wait: If true, wait (atomically) until function has completed on other
- * CPUs.
- *
- * Returns 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute func or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- * Actually there are a few legal cases, like panic.
- */
-int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
- int wait)
-{
- return smp_call_function_mask(cpu_online_map, func, info, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-static void stop_this_cpu(void *dummy)
-{
- local_irq_disable();
- /*
- * Remove this CPU:
- */
- cpu_clear(smp_processor_id(), cpu_online_map);
- disable_local_APIC();
- for (;;)
- halt();
-}
-
-void smp_send_stop(void)
-{
- int nolock;
- unsigned long flags;
-
- if (reboot_force)
- return;
-
- /* Don't deadlock on the call lock in panic */
- nolock = !spin_trylock(&call_lock);
- local_irq_save(flags);
- __smp_call_function_mask(cpu_online_map, stop_this_cpu, NULL, 0);
- if (!nolock)
- spin_unlock(&call_lock);
- disable_local_APIC();
- local_irq_restore(flags);
-}
-
-/*
- * Reschedule call back. Nothing to do,
- * all the work is done automatically when
- * we return from the interrupt.
- */
-asmlinkage void smp_reschedule_interrupt(void)
-{
- ack_APIC_irq();
- add_pda(irq_resched_count, 1);
-}
-
-asmlinkage void smp_call_function_interrupt(void)
-{
- void (*func) (void *info) = call_data->func;
- void *info = call_data->info;
- int wait = call_data->wait;
-
- ack_APIC_irq();
- /*
- * Notify initiating CPU that I've grabbed the data and am
- * about to execute the function
- */
- mb();
- atomic_inc(&call_data->started);
- /*
- * At this point the info structure may be out of scope unless wait==1
- */
- exit_idle();
- irq_enter();
- (*func)(info);
- add_pda(irq_call_count, 1);
- irq_exit();
- if (wait) {
- mb();
- atomic_inc(&call_data->finished);
- }
-}
-
diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot.c
similarity index 62%
rename from arch/x86/kernel/smpboot_32.c
rename to arch/x86/kernel/smpboot.c
index 579b9b7..e6abe8a 100644
--- a/arch/x86/kernel/smpboot_32.c
+++ b/arch/x86/kernel/smpboot.c
@@ -3,6 +3,7 @@
*
* (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
* (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ * Copyright 2001 Andi Kleen, SuSE Labs.
*
* Much of the core SMP work is based on previous work by Thomas Radke, to
* whom a great many thanks are extended.
@@ -29,53 +30,90 @@
* Ingo Molnar : various cleanups and rewrites
* Tigran Aivazian : fixed "0.00 in /proc/uptime on SMP" bug.
* Maciej W. Rozycki : Bits for genuine 82489DX APICs
+ * Andi Kleen : Changed for SMP boot into long mode.
* Martin J. Bligh : Added support for multi-quad systems
* Dave Jones : Report invalid combinations of Athlon CPUs.
-* Rusty Russell : Hacked into shape for new "hotplug" boot process. */
+ * Rusty Russell : Hacked into shape for new "hotplug" boot process.
+ * Andi Kleen : Converted to new state machine.
+ * Ashok Raj : CPU hotplug support
+ * Glauber Costa : i386 and x86_64 integration
+ */
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/bootmem.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
#include <linux/percpu.h>
+#include <linux/bootmem.h>
+#include <linux/err.h>
#include <linux/nmi.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <asm/tlbflush.h>
+#include <asm/acpi.h>
#include <asm/desc.h>
-#include <asm/arch_hooks.h>
#include <asm/nmi.h>
+#include <asm/irq.h>
+#include <asm/smp.h>
+#include <asm/trampoline.h>
+#include <asm/cpu.h>
+#include <asm/numa.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/mtrr.h>
+#include <asm/nmi.h>
+#include <asm/vmi.h>
+#include <linux/mc146818rtc.h>
#include <mach_apic.h>
#include <mach_wakecpu.h>
#include <smpboot_hooks.h>
-#include <asm/vmi.h>
-#include <asm/mtrr.h>
-/* Set if we find a B stepping CPU */
-static int __cpuinitdata smp_b_stepping;
+/*
+ * FIXME: For x86_64, those are defined in other files. But moving them here,
+ * would make the setup areas dependent on smp, which is a loss. When we
+ * integrate apic between arches, we can probably do a better job, but
+ * right now, they'll stay here -- glommer
+ */
+
+/* which logical CPU number maps to which CPU (physical APIC ID) */
+u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata =
+ { [0 ... NR_CPUS-1] = BAD_APICID };
+void *x86_cpu_to_apicid_early_ptr;
+
+u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
+ = { [0 ... NR_CPUS-1] = BAD_APICID };
+void *x86_bios_cpu_apicid_early_ptr;
+
+#ifdef CONFIG_X86_32
+u8 apicid_2_node[MAX_APICID];
+#endif
+
+/* State of each CPU */
+DEFINE_PER_CPU(int, cpu_state) = { 0 };
+
+/* Store all idle threads, this can be reused instead of creating
+* a new thread. Also avoids complicated thread destroy functionality
+* for idle threads.
+*/
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is
+ * removed after init for !CONFIG_HOTPLUG_CPU.
+ */
+static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
+#define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x))
+#define set_idle_for_cpu(x, p) (per_cpu(idle_thread_array, x) = (p))
+#else
+struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
+#define get_idle_for_cpu(x) (idle_thread_array[(x)])
+#define set_idle_for_cpu(x, p) (idle_thread_array[(x)] = (p))
+#endif
/* Number of siblings per CPU package */
int smp_num_siblings = 1;
EXPORT_SYMBOL(smp_num_siblings);
/* Last level cache ID of each logical CPU */
-DEFINE_PER_CPU(u8, cpu_llc_id) = BAD_APICID;
-
-/* representing HT siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_sibling_map);
-EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
-
-/* representing HT and core siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_core_map);
-EXPORT_PER_CPU_SYMBOL(cpu_core_map);
+DEFINE_PER_CPU(u16, cpu_llc_id) = BAD_APICID;
/* bitmap of online cpus */
cpumask_t cpu_online_map __read_mostly;
@@ -85,126 +123,94 @@
cpumask_t cpu_callout_map;
cpumask_t cpu_possible_map;
EXPORT_SYMBOL(cpu_possible_map);
-static cpumask_t smp_commenced_mask;
+
+/* representing HT siblings of each logical CPU */
+DEFINE_PER_CPU(cpumask_t, cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
+
+/* representing HT and core siblings of each logical CPU */
+DEFINE_PER_CPU(cpumask_t, cpu_core_map);
+EXPORT_PER_CPU_SYMBOL(cpu_core_map);
/* Per CPU bogomips and other parameters */
DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
EXPORT_PER_CPU_SYMBOL(cpu_info);
-/* which logical CPU number maps to which CPU (physical APIC ID) */
-u8 x86_cpu_to_apicid_init[NR_CPUS] __initdata =
- { [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_cpu_to_apicid_early_ptr;
-DEFINE_PER_CPU(u8, x86_cpu_to_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
-
-u8 apicid_2_node[MAX_APICID];
-
-/*
- * Trampoline 80x86 program as an array.
- */
-
-extern const unsigned char trampoline_data [];
-extern const unsigned char trampoline_end [];
-static unsigned char *trampoline_base;
-
-static void map_cpu_to_logical_apicid(void);
-
-/* State of each CPU. */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
-
-/*
- * Currently trivial. Write the real->protected mode
- * bootstrap into the page concerned. The caller
- * has made sure it's suitably aligned.
- */
-
-static unsigned long __cpuinit setup_trampoline(void)
-{
- memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data);
- return virt_to_phys(trampoline_base);
-}
-
-/*
- * We are called very early to get the low memory for the
- * SMP bootup trampoline page.
- */
-void __init smp_alloc_memory(void)
-{
- trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
- /*
- * Has to be in very low memory so we can execute
- * real-mode AP code.
- */
- if (__pa(trampoline_base) >= 0x9F000)
- BUG();
-}
-
-/*
- * The bootstrap kernel entry code has set these up. Save them for
- * a given CPU
- */
-
-void __cpuinit smp_store_cpu_info(int id)
-{
- struct cpuinfo_x86 *c = &cpu_data(id);
-
- *c = boot_cpu_data;
- c->cpu_index = id;
- if (id!=0)
- identify_secondary_cpu(c);
- /*
- * Mask B, Pentium, but not Pentium MMX
- */
- if (c->x86_vendor == X86_VENDOR_INTEL &&
- c->x86 == 5 &&
- c->x86_mask >= 1 && c->x86_mask <= 4 &&
- c->x86_model <= 3)
- /*
- * Remember we have B step Pentia with bugs
- */
- smp_b_stepping = 1;
-
- /*
- * Certain Athlons might work (for various values of 'work') in SMP
- * but they are not certified as MP capable.
- */
- if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) {
-
- if (num_possible_cpus() == 1)
- goto valid_k7;
-
- /* Athlon 660/661 is valid. */
- if ((c->x86_model==6) && ((c->x86_mask==0) || (c->x86_mask==1)))
- goto valid_k7;
-
- /* Duron 670 is valid */
- if ((c->x86_model==7) && (c->x86_mask==0))
- goto valid_k7;
-
- /*
- * Athlon 662, Duron 671, and Athlon >model 7 have capability bit.
- * It's worth noting that the A5 stepping (662) of some Athlon XP's
- * have the MP bit set.
- * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for more.
- */
- if (((c->x86_model==6) && (c->x86_mask>=2)) ||
- ((c->x86_model==7) && (c->x86_mask>=1)) ||
- (c->x86_model> 7))
- if (cpu_has_mp)
- goto valid_k7;
-
- /* If we get here, it's not a certified SMP capable AMD system. */
- add_taint(TAINT_UNSAFE_SMP);
- }
-
-valid_k7:
- ;
-}
-
static atomic_t init_deasserted;
-static void __cpuinit smp_callin(void)
+static int boot_cpu_logical_apicid;
+
+/* representing cpus for which sibling maps can be computed */
+static cpumask_t cpu_sibling_setup_map;
+
+/* Set if we find a B stepping CPU */
+int __cpuinitdata smp_b_stepping;
+
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_32)
+
+/* which logical CPUs are on which nodes */
+cpumask_t node_to_cpumask_map[MAX_NUMNODES] __read_mostly =
+ { [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE };
+EXPORT_SYMBOL(node_to_cpumask_map);
+/* which node each logical CPU is on */
+int cpu_to_node_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 };
+EXPORT_SYMBOL(cpu_to_node_map);
+
+/* set up a mapping between cpu and node. */
+static void map_cpu_to_node(int cpu, int node)
+{
+ printk(KERN_INFO "Mapping cpu %d to node %d\n", cpu, node);
+ cpu_set(cpu, node_to_cpumask_map[node]);
+ cpu_to_node_map[cpu] = node;
+}
+
+/* undo a mapping between cpu and node. */
+static void unmap_cpu_to_node(int cpu)
+{
+ int node;
+
+ printk(KERN_INFO "Unmapping cpu %d from all nodes\n", cpu);
+ for (node = 0; node < MAX_NUMNODES; node++)
+ cpu_clear(cpu, node_to_cpumask_map[node]);
+ cpu_to_node_map[cpu] = 0;
+}
+#else /* !(CONFIG_NUMA && CONFIG_X86_32) */
+#define map_cpu_to_node(cpu, node) ({})
+#define unmap_cpu_to_node(cpu) ({})
+#endif
+
+#ifdef CONFIG_X86_32
+u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly =
+ { [0 ... NR_CPUS-1] = BAD_APICID };
+
+void map_cpu_to_logical_apicid(void)
+{
+ int cpu = smp_processor_id();
+ int apicid = logical_smp_processor_id();
+ int node = apicid_to_node(apicid);
+
+ if (!node_online(node))
+ node = first_online_node;
+
+ cpu_2_logical_apicid[cpu] = apicid;
+ map_cpu_to_node(cpu, node);
+}
+
+void unmap_cpu_to_logical_apicid(int cpu)
+{
+ cpu_2_logical_apicid[cpu] = BAD_APICID;
+ unmap_cpu_to_node(cpu);
+}
+#else
+#define unmap_cpu_to_logical_apicid(cpu) do {} while (0)
+#define map_cpu_to_logical_apicid() do {} while (0)
+#endif
+
+/*
+ * Report back to the Boot Processor.
+ * Running on AP.
+ */
+void __cpuinit smp_callin(void)
{
int cpuid, phys_id;
unsigned long timeout;
@@ -220,12 +226,11 @@
/*
* (This works even if the APIC is not enabled.)
*/
- phys_id = GET_APIC_ID(apic_read(APIC_ID));
+ phys_id = GET_APIC_ID(read_apic_id());
cpuid = smp_processor_id();
if (cpu_isset(cpuid, cpu_callin_map)) {
- printk("huh, phys CPU#%d, CPU#%d already present??\n",
+ panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
phys_id, cpuid);
- BUG();
}
Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
@@ -247,13 +252,12 @@
*/
if (cpu_isset(cpuid, cpu_callout_map))
break;
- rep_nop();
+ cpu_relax();
}
if (!time_before(jiffies, timeout)) {
- printk("BUG: CPU%d started up but did not get a callout!\n",
- cpuid);
- BUG();
+ panic("%s: CPU%d started up but did not get a callout!\n",
+ __func__, cpuid);
}
/*
@@ -266,13 +270,19 @@
Dprintk("CALLIN, before setup_local_APIC().\n");
smp_callin_clear_local_apic();
setup_local_APIC();
+ end_local_APIC_setup();
map_cpu_to_logical_apicid();
/*
* Get our bogomips.
+ *
+ * Need to enable IRQs because it can take longer and then
+ * the NMI watchdog might kill us.
*/
+ local_irq_enable();
calibrate_delay();
- Dprintk("Stack at about %p\n",&cpuid);
+ local_irq_disable();
+ Dprintk("Stack at about %p\n", &cpuid);
/*
* Save our processor parameters
@@ -285,24 +295,181 @@
cpu_set(cpuid, cpu_callin_map);
}
-static int cpucount;
-
-/* maps the cpu to the sched domain representing multi-core */
-cpumask_t cpu_coregroup_map(int cpu)
+/*
+ * Activate a secondary processor.
+ */
+void __cpuinit start_secondary(void *unused)
{
- struct cpuinfo_x86 *c = &cpu_data(cpu);
/*
- * For perf, we return last level cache shared map.
- * And for power savings, we return cpu_core_map
+ * Don't put *anything* before cpu_init(), SMP booting is too
+ * fragile that we want to limit the things done here to the
+ * most necessary things.
*/
- if (sched_mc_power_savings || sched_smt_power_savings)
- return per_cpu(cpu_core_map, cpu);
- else
- return c->llc_shared_map;
+#ifdef CONFIG_VMI
+ vmi_bringup();
+#endif
+ cpu_init();
+ preempt_disable();
+ smp_callin();
+
+ /* otherwise gcc will move up smp_processor_id before the cpu_init */
+ barrier();
+ /*
+ * Check TSC synchronization with the BP:
+ */
+ check_tsc_sync_target();
+
+ if (nmi_watchdog == NMI_IO_APIC) {
+ disable_8259A_irq(0);
+ enable_NMI_through_LVT0();
+ enable_8259A_irq(0);
+ }
+
+ /* This must be done before setting cpu_online_map */
+ set_cpu_sibling_map(raw_smp_processor_id());
+ wmb();
+
+ /*
+ * We need to hold call_lock, so there is no inconsistency
+ * between the time smp_call_function() determines number of
+ * IPI recipients, and the time when the determination is made
+ * for which cpus receive the IPI. Holding this
+ * lock helps us to not include this cpu in a currently in progress
+ * smp_call_function().
+ */
+ lock_ipi_call_lock();
+#ifdef CONFIG_X86_64
+ spin_lock(&vector_lock);
+
+ /* Setup the per cpu irq handling data structures */
+ __setup_vector_irq(smp_processor_id());
+ /*
+ * Allow the master to continue.
+ */
+ spin_unlock(&vector_lock);
+#endif
+ cpu_set(smp_processor_id(), cpu_online_map);
+ unlock_ipi_call_lock();
+ per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+
+ setup_secondary_clock();
+
+ wmb();
+ cpu_idle();
}
-/* representing cpus for which sibling maps can be computed */
-static cpumask_t cpu_sibling_setup_map;
+#ifdef CONFIG_X86_32
+/*
+ * Everything has been set up for the secondary
+ * CPUs - they just need to reload everything
+ * from the task structure
+ * This function must not return.
+ */
+void __devinit initialize_secondary(void)
+{
+ /*
+ * We don't actually need to load the full TSS,
+ * basically just the stack pointer and the ip.
+ */
+
+ asm volatile(
+ "movl %0,%%esp\n\t"
+ "jmp *%1"
+ :
+ :"m" (current->thread.sp), "m" (current->thread.ip));
+}
+#endif
+
+static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_32
+ /*
+ * Mask B, Pentium, but not Pentium MMX
+ */
+ if (c->x86_vendor == X86_VENDOR_INTEL &&
+ c->x86 == 5 &&
+ c->x86_mask >= 1 && c->x86_mask <= 4 &&
+ c->x86_model <= 3)
+ /*
+ * Remember we have B step Pentia with bugs
+ */
+ smp_b_stepping = 1;
+
+ /*
+ * Certain Athlons might work (for various values of 'work') in SMP
+ * but they are not certified as MP capable.
+ */
+ if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) {
+
+ if (num_possible_cpus() == 1)
+ goto valid_k7;
+
+ /* Athlon 660/661 is valid. */
+ if ((c->x86_model == 6) && ((c->x86_mask == 0) ||
+ (c->x86_mask == 1)))
+ goto valid_k7;
+
+ /* Duron 670 is valid */
+ if ((c->x86_model == 7) && (c->x86_mask == 0))
+ goto valid_k7;
+
+ /*
+ * Athlon 662, Duron 671, and Athlon >model 7 have capability
+ * bit. It's worth noting that the A5 stepping (662) of some
+ * Athlon XP's have the MP bit set.
+ * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
+ * more.
+ */
+ if (((c->x86_model == 6) && (c->x86_mask >= 2)) ||
+ ((c->x86_model == 7) && (c->x86_mask >= 1)) ||
+ (c->x86_model > 7))
+ if (cpu_has_mp)
+ goto valid_k7;
+
+ /* If we get here, not a certified SMP capable AMD system. */
+ add_taint(TAINT_UNSAFE_SMP);
+ }
+
+valid_k7:
+ ;
+#endif
+}
+
+void __cpuinit smp_checks(void)
+{
+ if (smp_b_stepping)
+ printk(KERN_WARNING "WARNING: SMP operation may be unreliable"
+ "with B stepping processors.\n");
+
+ /*
+ * Don't taint if we are running SMP kernel on a single non-MP
+ * approved Athlon
+ */
+ if (tainted & TAINT_UNSAFE_SMP) {
+ if (num_online_cpus())
+ printk(KERN_INFO "WARNING: This combination of AMD"
+ "processors is not suitable for SMP.\n");
+ else
+ tainted &= ~TAINT_UNSAFE_SMP;
+ }
+}
+
+/*
+ * The bootstrap kernel entry code has set these up. Save them for
+ * a given CPU
+ */
+
+void __cpuinit smp_store_cpu_info(int id)
+{
+ struct cpuinfo_x86 *c = &cpu_data(id);
+
+ *c = boot_cpu_data;
+ c->cpu_index = id;
+ if (id != 0)
+ identify_secondary_cpu(c);
+ smp_apply_quirks(c);
+}
+
void __cpuinit set_cpu_sibling_map(int cpu)
{
@@ -366,165 +533,76 @@
}
}
-/*
- * Activate a secondary processor.
- */
-static void __cpuinit start_secondary(void *unused)
+/* maps the cpu to the sched domain representing multi-core */
+cpumask_t cpu_coregroup_map(int cpu)
{
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
/*
- * Don't put *anything* before cpu_init(), SMP booting is too
- * fragile that we want to limit the things done here to the
- * most necessary things.
+ * For perf, we return last level cache shared map.
+ * And for power savings, we return cpu_core_map
*/
-#ifdef CONFIG_VMI
- vmi_bringup();
+ if (sched_mc_power_savings || sched_smt_power_savings)
+ return per_cpu(cpu_core_map, cpu);
+ else
+ return c->llc_shared_map;
+}
+
+#ifdef CONFIG_X86_32
+/*
+ * We are called very early to get the low memory for the
+ * SMP bootup trampoline page.
+ */
+void __init smp_alloc_memory(void)
+{
+ trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
+ /*
+ * Has to be in very low memory so we can execute
+ * real-mode AP code.
+ */
+ if (__pa(trampoline_base) >= 0x9F000)
+ BUG();
+}
#endif
- cpu_init();
- preempt_disable();
- smp_callin();
- while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
- rep_nop();
+
+void impress_friends(void)
+{
+ int cpu;
+ unsigned long bogosum = 0;
/*
- * Check TSC synchronization with the BP:
+ * Allow the user to impress friends.
*/
- check_tsc_sync_target();
+ Dprintk("Before bogomips.\n");
+ for_each_possible_cpu(cpu)
+ if (cpu_isset(cpu, cpu_callout_map))
+ bogosum += cpu_data(cpu).loops_per_jiffy;
+ printk(KERN_INFO
+ "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
+ num_online_cpus(),
+ bogosum/(500000/HZ),
+ (bogosum/(5000/HZ))%100);
- setup_secondary_clock();
- if (nmi_watchdog == NMI_IO_APIC) {
- disable_8259A_irq(0);
- enable_NMI_through_LVT0();
- enable_8259A_irq(0);
- }
- /*
- * low-memory mappings have been cleared, flush them from
- * the local TLBs too.
- */
- local_flush_tlb();
-
- /* This must be done before setting cpu_online_map */
- set_cpu_sibling_map(raw_smp_processor_id());
- wmb();
-
- /*
- * We need to hold call_lock, so there is no inconsistency
- * between the time smp_call_function() determines number of
- * IPI recipients, and the time when the determination is made
- * for which cpus receive the IPI. Holding this
- * lock helps us to not include this cpu in a currently in progress
- * smp_call_function().
- */
- lock_ipi_call_lock();
- cpu_set(smp_processor_id(), cpu_online_map);
- unlock_ipi_call_lock();
- per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
-
- /* We can take interrupts now: we're officially "up". */
- local_irq_enable();
-
- wmb();
- cpu_idle();
-}
-
-/*
- * Everything has been set up for the secondary
- * CPUs - they just need to reload everything
- * from the task structure
- * This function must not return.
- */
-void __devinit initialize_secondary(void)
-{
- /*
- * We don't actually need to load the full TSS,
- * basically just the stack pointer and the ip.
- */
-
- asm volatile(
- "movl %0,%%esp\n\t"
- "jmp *%1"
- :
- :"m" (current->thread.sp),"m" (current->thread.ip));
-}
-
-/* Static state in head.S used to set up a CPU */
-extern struct {
- void * sp;
- unsigned short ss;
-} stack_start;
-
-#ifdef CONFIG_NUMA
-
-/* which logical CPUs are on which nodes */
-cpumask_t node_to_cpumask_map[MAX_NUMNODES] __read_mostly =
- { [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE };
-EXPORT_SYMBOL(node_to_cpumask_map);
-/* which node each logical CPU is on */
-int cpu_to_node_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 };
-EXPORT_SYMBOL(cpu_to_node_map);
-
-/* set up a mapping between cpu and node. */
-static inline void map_cpu_to_node(int cpu, int node)
-{
- printk("Mapping cpu %d to node %d\n", cpu, node);
- cpu_set(cpu, node_to_cpumask_map[node]);
- cpu_to_node_map[cpu] = node;
-}
-
-/* undo a mapping between cpu and node. */
-static inline void unmap_cpu_to_node(int cpu)
-{
- int node;
-
- printk("Unmapping cpu %d from all nodes\n", cpu);
- for (node = 0; node < MAX_NUMNODES; node ++)
- cpu_clear(cpu, node_to_cpumask_map[node]);
- cpu_to_node_map[cpu] = 0;
-}
-#else /* !CONFIG_NUMA */
-
-#define map_cpu_to_node(cpu, node) ({})
-#define unmap_cpu_to_node(cpu) ({})
-
-#endif /* CONFIG_NUMA */
-
-u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID };
-
-static void map_cpu_to_logical_apicid(void)
-{
- int cpu = smp_processor_id();
- int apicid = logical_smp_processor_id();
- int node = apicid_to_node(apicid);
-
- if (!node_online(node))
- node = first_online_node;
-
- cpu_2_logical_apicid[cpu] = apicid;
- map_cpu_to_node(cpu, node);
-}
-
-static void unmap_cpu_to_logical_apicid(int cpu)
-{
- cpu_2_logical_apicid[cpu] = BAD_APICID;
- unmap_cpu_to_node(cpu);
+ Dprintk("Before bogocount - setting activated=1.\n");
}
static inline void __inquire_remote_apic(int apicid)
{
- int i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
+ unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
char *names[] = { "ID", "VERSION", "SPIV" };
int timeout;
- unsigned long status;
+ u32 status;
- printk("Inquiring remote APIC #%d...\n", apicid);
+ printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid);
for (i = 0; i < ARRAY_SIZE(regs); i++) {
- printk("... APIC #%d %s: ", apicid, names[i]);
+ printk(KERN_INFO "... APIC #%d %s: ", apicid, names[i]);
/*
* Wait for idle.
*/
status = safe_apic_wait_icr_idle();
if (status)
- printk("a previous APIC delivery may have failed\n");
+ printk(KERN_CONT
+ "a previous APIC delivery may have failed\n");
apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
@@ -538,16 +616,16 @@
switch (status) {
case APIC_ICR_RR_VALID:
status = apic_read(APIC_RRR);
- printk("%lx\n", status);
+ printk(KERN_CONT "%08x\n", status);
break;
default:
- printk("failed\n");
+ printk(KERN_CONT "failed\n");
}
}
}
#ifdef WAKE_SECONDARY_VIA_NMI
-/*
+/*
* Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
* INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
* won't ... remember to clear down the APIC, etc later.
@@ -584,9 +662,9 @@
Dprintk("NMI sent.\n");
if (send_status)
- printk("APIC never delivered???\n");
+ printk(KERN_ERR "APIC never delivered???\n");
if (accept_status)
- printk("APIC delivery error (%lx).\n", accept_status);
+ printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
return (send_status | accept_status);
}
@@ -637,6 +715,7 @@
Dprintk("Waiting for send to finish...\n");
send_status = safe_apic_wait_icr_idle();
+ mb();
atomic_set(&init_deasserted, 1);
/*
@@ -655,7 +734,11 @@
* target processor state.
*/
startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
- (unsigned long) stack_start.sp);
+#ifdef CONFIG_X86_64
+ (unsigned long)init_rsp);
+#else
+ (unsigned long)stack_start.sp);
+#endif
/*
* Run STARTUP IPI loop.
@@ -665,7 +748,7 @@
maxlvt = lapic_get_maxlvt();
for (j = 1; j <= num_starts; j++) {
- Dprintk("Sending STARTUP #%d.\n",j);
+ Dprintk("Sending STARTUP #%d.\n", j);
apic_read_around(APIC_SPIV);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
@@ -711,49 +794,29 @@
Dprintk("After Startup.\n");
if (send_status)
- printk("APIC never delivered???\n");
+ printk(KERN_ERR "APIC never delivered???\n");
if (accept_status)
- printk("APIC delivery error (%lx).\n", accept_status);
+ printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
return (send_status | accept_status);
}
#endif /* WAKE_SECONDARY_VIA_INIT */
-extern cpumask_t cpu_initialized;
-static inline int alloc_cpu_id(void)
-{
- cpumask_t tmp_map;
- int cpu;
- cpus_complement(tmp_map, cpu_present_map);
- cpu = first_cpu(tmp_map);
- if (cpu >= NR_CPUS)
- return -ENODEV;
- return cpu;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-static struct task_struct * __cpuinitdata cpu_idle_tasks[NR_CPUS];
-static inline struct task_struct * __cpuinit alloc_idle_task(int cpu)
-{
+struct create_idle {
+ struct work_struct work;
struct task_struct *idle;
+ struct completion done;
+ int cpu;
+};
- if ((idle = cpu_idle_tasks[cpu]) != NULL) {
- /* initialize thread_struct. we really want to avoid destroy
- * idle tread
- */
- idle->thread.sp = (unsigned long)task_pt_regs(idle);
- init_idle(idle, cpu);
- return idle;
- }
- idle = fork_idle(cpu);
+static void __cpuinit do_fork_idle(struct work_struct *work)
+{
+ struct create_idle *c_idle =
+ container_of(work, struct create_idle, work);
- if (!IS_ERR(idle))
- cpu_idle_tasks[cpu] = idle;
- return idle;
+ c_idle->idle = fork_idle(c_idle->cpu);
+ complete(&c_idle->done);
}
-#else
-#define alloc_idle_task(cpu) fork_idle(cpu)
-#endif
static int __cpuinit do_boot_cpu(int apicid, int cpu)
/*
@@ -762,45 +825,92 @@
* Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu.
*/
{
- struct task_struct *idle;
- unsigned long boot_error;
+ unsigned long boot_error = 0;
int timeout;
- unsigned long start_eip;
+ unsigned long start_ip;
unsigned short nmi_high = 0, nmi_low = 0;
+ struct create_idle c_idle = {
+ .cpu = cpu,
+ .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
+ };
+ INIT_WORK(&c_idle.work, do_fork_idle);
+#ifdef CONFIG_X86_64
+ /* allocate memory for gdts of secondary cpus. Hotplug is considered */
+ if (!cpu_gdt_descr[cpu].address &&
+ !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
+ printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu);
+ return -1;
+ }
- /*
- * Save current MTRR state in case it was changed since early boot
- * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
- */
- mtrr_save_state();
+ /* Allocate node local memory for AP pdas */
+ if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
+ struct x8664_pda *newpda, *pda;
+ int node = cpu_to_node(cpu);
+ pda = cpu_pda(cpu);
+ newpda = kmalloc_node(sizeof(struct x8664_pda), GFP_ATOMIC,
+ node);
+ if (newpda) {
+ memcpy(newpda, pda, sizeof(struct x8664_pda));
+ cpu_pda(cpu) = newpda;
+ } else
+ printk(KERN_ERR
+ "Could not allocate node local PDA for CPU %d on node %d\n",
+ cpu, node);
+ }
+#endif
+
+ alternatives_smp_switch(1);
+
+ c_idle.idle = get_idle_for_cpu(cpu);
/*
* We can't use kernel_thread since we must avoid to
* reschedule the child.
*/
- idle = alloc_idle_task(cpu);
- if (IS_ERR(idle))
- panic("failed fork for CPU %d", cpu);
+ if (c_idle.idle) {
+ c_idle.idle->thread.sp = (unsigned long) (((struct pt_regs *)
+ (THREAD_SIZE + task_stack_page(c_idle.idle))) - 1);
+ init_idle(c_idle.idle, cpu);
+ goto do_rest;
+ }
+ if (!keventd_up() || current_is_keventd())
+ c_idle.work.func(&c_idle.work);
+ else {
+ schedule_work(&c_idle.work);
+ wait_for_completion(&c_idle.done);
+ }
+
+ if (IS_ERR(c_idle.idle)) {
+ printk("failed fork for CPU %d\n", cpu);
+ return PTR_ERR(c_idle.idle);
+ }
+
+ set_idle_for_cpu(cpu, c_idle.idle);
+do_rest:
+#ifdef CONFIG_X86_32
+ per_cpu(current_task, cpu) = c_idle.idle;
init_gdt(cpu);
- per_cpu(current_task, cpu) = idle;
early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
+ c_idle.idle->thread.ip = (unsigned long) start_secondary;
+ /* Stack for startup_32 can be just as for start_secondary onwards */
+ stack_start.sp = (void *) c_idle.idle->thread.sp;
+ irq_ctx_init(cpu);
+#else
+ cpu_pda(cpu)->pcurrent = c_idle.idle;
+ init_rsp = c_idle.idle->thread.sp;
+ load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread);
+ initial_code = (unsigned long)start_secondary;
+ clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
+#endif
- idle->thread.ip = (unsigned long) start_secondary;
- /* start_eip had better be page-aligned! */
- start_eip = setup_trampoline();
-
- ++cpucount;
- alternatives_smp_switch(1);
+ /* start_ip had better be page-aligned! */
+ start_ip = setup_trampoline();
/* So we see what's up */
- printk("Booting processor %d/%d ip %lx\n", cpu, apicid, start_eip);
- /* Stack for startup_32 can be just as for start_secondary onwards */
- stack_start.sp = (void *) idle->thread.sp;
+ printk(KERN_INFO "Booting processor %d/%d ip %lx\n",
+ cpu, apicid, start_ip);
- irq_ctx_init(cpu);
-
- per_cpu(x86_cpu_to_apicid, cpu) = apicid;
/*
* This grunge runs the startup process for
* the targeted processor.
@@ -812,12 +922,17 @@
store_NMI_vector(&nmi_high, &nmi_low);
- smpboot_setup_warm_reset_vector(start_eip);
+ smpboot_setup_warm_reset_vector(start_ip);
+ /*
+ * Be paranoid about clearing APIC errors.
+ */
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
/*
* Starting actual IPI sequence...
*/
- boot_error = wakeup_secondary_cpu(apicid, start_eip);
+ boot_error = wakeup_secondary_cpu(apicid, start_ip);
if (!boot_error) {
/*
@@ -839,18 +954,18 @@
if (cpu_isset(cpu, cpu_callin_map)) {
/* number CPUs logically, starting from 1 (BSP is 0) */
Dprintk("OK.\n");
- printk("CPU%d: ", cpu);
+ printk(KERN_INFO "CPU%d: ", cpu);
print_cpu_info(&cpu_data(cpu));
Dprintk("CPU has booted.\n");
} else {
- boot_error= 1;
+ boot_error = 1;
if (*((volatile unsigned char *)trampoline_base)
== 0xA5)
/* trampoline started but...? */
- printk("Stuck ??\n");
+ printk(KERN_ERR "Stuck ??\n");
else
/* trampoline code not run */
- printk("Not responding.\n");
+ printk(KERN_ERR "Not responding.\n");
inquire_remote_apic(apicid);
}
}
@@ -858,408 +973,71 @@
if (boot_error) {
/* Try to put things back the way they were before ... */
unmap_cpu_to_logical_apicid(cpu);
- cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
+#ifdef CONFIG_X86_64
+ clear_node_cpumask(cpu); /* was set by numa_add_cpu */
+#endif
+ cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */
cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
- cpucount--;
- } else {
- per_cpu(x86_cpu_to_apicid, cpu) = apicid;
- cpu_set(cpu, cpu_present_map);
+ cpu_clear(cpu, cpu_possible_map);
+ cpu_clear(cpu, cpu_present_map);
+ per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
}
/* mark "stuck" area as not stuck */
*((volatile unsigned long *)trampoline_base) = 0;
- return boot_error;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-void cpu_exit_clear(void)
-{
- int cpu = raw_smp_processor_id();
-
- idle_task_exit();
-
- cpucount --;
- cpu_uninit();
- irq_ctx_exit(cpu);
-
- cpu_clear(cpu, cpu_callout_map);
- cpu_clear(cpu, cpu_callin_map);
-
- cpu_clear(cpu, smp_commenced_mask);
- unmap_cpu_to_logical_apicid(cpu);
-}
-
-struct warm_boot_cpu_info {
- struct completion *complete;
- struct work_struct task;
- int apicid;
- int cpu;
-};
-
-static void __cpuinit do_warm_boot_cpu(struct work_struct *work)
-{
- struct warm_boot_cpu_info *info =
- container_of(work, struct warm_boot_cpu_info, task);
- do_boot_cpu(info->apicid, info->cpu);
- complete(info->complete);
-}
-
-static int __cpuinit __smp_prepare_cpu(int cpu)
-{
- DECLARE_COMPLETION_ONSTACK(done);
- struct warm_boot_cpu_info info;
- int apicid, ret;
-
- apicid = per_cpu(x86_cpu_to_apicid, cpu);
- if (apicid == BAD_APICID) {
- ret = -ENODEV;
- goto exit;
- }
-
- info.complete = &done;
- info.apicid = apicid;
- info.cpu = cpu;
- INIT_WORK(&info.task, do_warm_boot_cpu);
-
- /* init low mem mapping */
- clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
- min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS));
- flush_tlb_all();
- schedule_work(&info.task);
- wait_for_completion(&done);
-
- zap_low_mappings();
- ret = 0;
-exit:
- return ret;
-}
-#endif
-
-/*
- * Cycle through the processors sending APIC IPIs to boot each.
- */
-
-static int boot_cpu_logical_apicid;
-/* Where the IO area was mapped on multiquad, always 0 otherwise */
-void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
-EXPORT_SYMBOL(xquad_portio);
-#endif
-
-static void __init smp_boot_cpus(unsigned int max_cpus)
-{
- int apicid, cpu, bit, kicked;
- unsigned long bogosum = 0;
-
- /*
- * Setup boot CPU information
- */
- smp_store_cpu_info(0); /* Final full version of the data */
- printk("CPU%d: ", 0);
- print_cpu_info(&cpu_data(0));
-
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
- boot_cpu_logical_apicid = logical_smp_processor_id();
- per_cpu(x86_cpu_to_apicid, 0) = boot_cpu_physical_apicid;
-
- current_thread_info()->cpu = 0;
-
- set_cpu_sibling_map(0);
-
- /*
- * If we couldn't find an SMP configuration at boot time,
- * get out of here now!
- */
- if (!smp_found_config && !acpi_lapic) {
- printk(KERN_NOTICE "SMP motherboard not detected.\n");
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
- if (APIC_init_uniprocessor())
- printk(KERN_NOTICE "Local APIC not detected."
- " Using dummy APIC emulation.\n");
- map_cpu_to_logical_apicid();
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
- return;
- }
-
- /*
- * Should not be necessary because the MP table should list the boot
- * CPU too, but we do it for the sake of robustness anyway.
- * Makes no sense to do this check in clustered apic mode, so skip it
- */
- if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
- printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
- boot_cpu_physical_apicid);
- physid_set(hard_smp_processor_id(), phys_cpu_present_map);
- }
-
- /*
- * If we couldn't find a local APIC, then get out of here now!
- */
- if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
- printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
- boot_cpu_physical_apicid);
- printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
- map_cpu_to_logical_apicid();
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
- return;
- }
-
- verify_local_APIC();
-
- /*
- * If SMP should be disabled, then really disable it!
- */
- if (!max_cpus) {
- smp_found_config = 0;
- printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
-
- if (nmi_watchdog == NMI_LOCAL_APIC) {
- printk(KERN_INFO "activating minimal APIC for NMI watchdog use.\n");
- connect_bsp_APIC();
- setup_local_APIC();
- }
- smpboot_clear_io_apic_irqs();
- phys_cpu_present_map = physid_mask_of_physid(0);
- map_cpu_to_logical_apicid();
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
- return;
- }
-
- connect_bsp_APIC();
- setup_local_APIC();
- map_cpu_to_logical_apicid();
-
-
- setup_portio_remap();
-
- /*
- * Scan the CPU present map and fire up the other CPUs via do_boot_cpu
- *
- * In clustered apic mode, phys_cpu_present_map is a constructed thus:
- * bits 0-3 are quad0, 4-7 are quad1, etc. A perverse twist on the
- * clustered apic ID.
- */
- Dprintk("CPU present map: %lx\n", physids_coerce(phys_cpu_present_map));
-
- kicked = 1;
- for (bit = 0; kicked < NR_CPUS && bit < MAX_APICS; bit++) {
- apicid = cpu_present_to_apicid(bit);
- /*
- * Don't even attempt to start the boot CPU!
- */
- if ((apicid == boot_cpu_apicid) || (apicid == BAD_APICID))
- continue;
-
- if (!check_apicid_present(bit))
- continue;
- if (max_cpus <= cpucount+1)
- continue;
-
- if (((cpu = alloc_cpu_id()) <= 0) || do_boot_cpu(apicid, cpu))
- printk("CPU #%d not responding - cannot use it.\n",
- apicid);
- else
- ++kicked;
- }
-
/*
* Cleanup possible dangling ends...
*/
smpboot_restore_warm_reset_vector();
- /*
- * Allow the user to impress friends.
- */
- Dprintk("Before bogomips.\n");
- for_each_possible_cpu(cpu)
- if (cpu_isset(cpu, cpu_callout_map))
- bogosum += cpu_data(cpu).loops_per_jiffy;
- printk(KERN_INFO
- "Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
- cpucount+1,
- bogosum/(500000/HZ),
- (bogosum/(5000/HZ))%100);
-
- Dprintk("Before bogocount - setting activated=1.\n");
-
- if (smp_b_stepping)
- printk(KERN_WARNING "WARNING: SMP operation may be unreliable with B stepping processors.\n");
-
- /*
- * Don't taint if we are running SMP kernel on a single non-MP
- * approved Athlon
- */
- if (tainted & TAINT_UNSAFE_SMP) {
- if (cpucount)
- printk (KERN_INFO "WARNING: This combination of AMD processors is not suitable for SMP.\n");
- else
- tainted &= ~TAINT_UNSAFE_SMP;
- }
-
- Dprintk("Boot done.\n");
-
- /*
- * construct cpu_sibling_map, so that we can tell sibling CPUs
- * efficiently.
- */
- for_each_possible_cpu(cpu) {
- cpus_clear(per_cpu(cpu_sibling_map, cpu));
- cpus_clear(per_cpu(cpu_core_map, cpu));
- }
-
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
-
- smpboot_setup_io_apic();
-
- setup_boot_clock();
+ return boot_error;
}
-/* These are wrappers to interface to the new boot process. Someone
- who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */
-void __init native_smp_prepare_cpus(unsigned int max_cpus)
-{
- smp_commenced_mask = cpumask_of_cpu(0);
- cpu_callin_map = cpumask_of_cpu(0);
- mb();
- smp_boot_cpus(max_cpus);
-}
-
-void __init native_smp_prepare_boot_cpu(void)
-{
- unsigned int cpu = smp_processor_id();
-
- init_gdt(cpu);
- switch_to_new_gdt();
-
- cpu_set(cpu, cpu_online_map);
- cpu_set(cpu, cpu_callout_map);
- cpu_set(cpu, cpu_present_map);
- cpu_set(cpu, cpu_possible_map);
- __get_cpu_var(cpu_state) = CPU_ONLINE;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-void remove_siblinginfo(int cpu)
-{
- int sibling;
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
- cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
- /*/
- * last thread sibling in this cpu core going down
- */
- if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
- cpu_data(sibling).booted_cores--;
- }
-
- for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
- cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
- cpus_clear(per_cpu(cpu_sibling_map, cpu));
- cpus_clear(per_cpu(cpu_core_map, cpu));
- c->phys_proc_id = 0;
- c->cpu_core_id = 0;
- cpu_clear(cpu, cpu_sibling_setup_map);
-}
-
-int __cpu_disable(void)
-{
- cpumask_t map = cpu_online_map;
- int cpu = smp_processor_id();
-
- /*
- * Perhaps use cpufreq to drop frequency, but that could go
- * into generic code.
- *
- * We won't take down the boot processor on i386 due to some
- * interrupts only being able to be serviced by the BSP.
- * Especially so if we're not using an IOAPIC -zwane
- */
- if (cpu == 0)
- return -EBUSY;
- if (nmi_watchdog == NMI_LOCAL_APIC)
- stop_apic_nmi_watchdog(NULL);
- clear_local_APIC();
- /* Allow any queued timer interrupts to get serviced */
- local_irq_enable();
- mdelay(1);
- local_irq_disable();
-
- remove_siblinginfo(cpu);
-
- cpu_clear(cpu, map);
- fixup_irqs(map);
- /* It's now safe to remove this processor from the online map */
- cpu_clear(cpu, cpu_online_map);
- return 0;
-}
-
-void __cpu_die(unsigned int cpu)
-{
- /* We don't do anything here: idle task is faking death itself. */
- unsigned int i;
-
- for (i = 0; i < 10; i++) {
- /* They ack this in play_dead by setting CPU_DEAD */
- if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
- printk ("CPU %d is now offline\n", cpu);
- if (1 == num_online_cpus())
- alternatives_smp_switch(0);
- return;
- }
- msleep(100);
- }
- printk(KERN_ERR "CPU %u didn't die...\n", cpu);
-}
-#else /* ... !CONFIG_HOTPLUG_CPU */
-int __cpu_disable(void)
-{
- return -ENOSYS;
-}
-
-void __cpu_die(unsigned int cpu)
-{
- /* We said "no" in __cpu_disable */
- BUG();
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
int __cpuinit native_cpu_up(unsigned int cpu)
{
+ int apicid = cpu_present_to_apicid(cpu);
unsigned long flags;
-#ifdef CONFIG_HOTPLUG_CPU
- int ret = 0;
+ int err;
- /*
- * We do warm boot only on cpus that had booted earlier
- * Otherwise cold boot is all handled from smp_boot_cpus().
- * cpu_callin_map is set during AP kickstart process. Its reset
- * when a cpu is taken offline from cpu_exit_clear().
- */
- if (!cpu_isset(cpu, cpu_callin_map))
- ret = __smp_prepare_cpu(cpu);
+ WARN_ON(irqs_disabled());
- if (ret)
- return -EIO;
-#endif
+ Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu);
- /* In case one didn't come up */
- if (!cpu_isset(cpu, cpu_callin_map)) {
- printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu);
- return -EIO;
+ if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
+ !physid_isset(apicid, phys_cpu_present_map)) {
+ printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
+ return -EINVAL;
}
+ /*
+ * Already booted CPU?
+ */
+ if (cpu_isset(cpu, cpu_callin_map)) {
+ Dprintk("do_boot_cpu %d Already started\n", cpu);
+ return -ENOSYS;
+ }
+
+ /*
+ * Save current MTRR state in case it was changed since early boot
+ * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
+ */
+ mtrr_save_state();
+
per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
- /* Unleash the CPU! */
- cpu_set(cpu, smp_commenced_mask);
+
+#ifdef CONFIG_X86_32
+ /* init low mem mapping */
+ clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
+ min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS));
+ flush_tlb_all();
+#endif
+
+ err = do_boot_cpu(apicid, cpu);
+ if (err < 0) {
+ Dprintk("do_boot_cpu failed %d\n", err);
+ return err;
+ }
/*
* Check TSC synchronization with the AP (keep irqs disabled
@@ -1277,34 +1055,375 @@
return 0;
}
+/*
+ * Fall back to non SMP mode after errors.
+ *
+ * RED-PEN audit/test this more. I bet there is more state messed up here.
+ */
+static __init void disable_smp(void)
+{
+ cpu_present_map = cpumask_of_cpu(0);
+ cpu_possible_map = cpumask_of_cpu(0);
+#ifdef CONFIG_X86_32
+ smpboot_clear_io_apic_irqs();
+#endif
+ if (smp_found_config)
+ phys_cpu_present_map =
+ physid_mask_of_physid(boot_cpu_physical_apicid);
+ else
+ phys_cpu_present_map = physid_mask_of_physid(0);
+ map_cpu_to_logical_apicid();
+ cpu_set(0, per_cpu(cpu_sibling_map, 0));
+ cpu_set(0, per_cpu(cpu_core_map, 0));
+}
+
+/*
+ * Various sanity checks.
+ */
+static int __init smp_sanity_check(unsigned max_cpus)
+{
+ preempt_disable();
+ if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
+ printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
+ "by the BIOS.\n", hard_smp_processor_id());
+ physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+ }
+
+ /*
+ * If we couldn't find an SMP configuration at boot time,
+ * get out of here now!
+ */
+ if (!smp_found_config && !acpi_lapic) {
+ preempt_enable();
+ printk(KERN_NOTICE "SMP motherboard not detected.\n");
+ disable_smp();
+ if (APIC_init_uniprocessor())
+ printk(KERN_NOTICE "Local APIC not detected."
+ " Using dummy APIC emulation.\n");
+ return -1;
+ }
+
+ /*
+ * Should not be necessary because the MP table should list the boot
+ * CPU too, but we do it for the sake of robustness anyway.
+ */
+ if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+ printk(KERN_NOTICE
+ "weird, boot CPU (#%d) not listed by the BIOS.\n",
+ boot_cpu_physical_apicid);
+ physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+ }
+ preempt_enable();
+
+ /*
+ * If we couldn't find a local APIC, then get out of here now!
+ */
+ if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
+ !cpu_has_apic) {
+ printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
+ boot_cpu_physical_apicid);
+ printk(KERN_ERR "... forcing use of dummy APIC emulation."
+ "(tell your hw vendor)\n");
+ smpboot_clear_io_apic();
+ return -1;
+ }
+
+ verify_local_APIC();
+
+ /*
+ * If SMP should be disabled, then really disable it!
+ */
+ if (!max_cpus) {
+ printk(KERN_INFO "SMP mode deactivated,"
+ "forcing use of dummy APIC emulation.\n");
+ smpboot_clear_io_apic();
+#ifdef CONFIG_X86_32
+ if (nmi_watchdog == NMI_LOCAL_APIC) {
+ printk(KERN_INFO "activating minimal APIC for"
+ "NMI watchdog use.\n");
+ connect_bsp_APIC();
+ setup_local_APIC();
+ end_local_APIC_setup();
+ }
+#endif
+ return -1;
+ }
+
+ return 0;
+}
+
+static void __init smp_cpu_index_default(void)
+{
+ int i;
+ struct cpuinfo_x86 *c;
+
+ for_each_cpu_mask(i, cpu_possible_map) {
+ c = &cpu_data(i);
+ /* mark all to hotplug */
+ c->cpu_index = NR_CPUS;
+ }
+}
+
+/*
+ * Prepare for SMP bootup. The MP table or ACPI has been read
+ * earlier. Just do some sanity checking here and enable APIC mode.
+ */
+void __init native_smp_prepare_cpus(unsigned int max_cpus)
+{
+ nmi_watchdog_default();
+ smp_cpu_index_default();
+ current_cpu_data = boot_cpu_data;
+ cpu_callin_map = cpumask_of_cpu(0);
+ mb();
+ /*
+ * Setup boot CPU information
+ */
+ smp_store_cpu_info(0); /* Final full version of the data */
+ boot_cpu_logical_apicid = logical_smp_processor_id();
+ current_thread_info()->cpu = 0; /* needed? */
+ set_cpu_sibling_map(0);
+
+ if (smp_sanity_check(max_cpus) < 0) {
+ printk(KERN_INFO "SMP disabled\n");
+ disable_smp();
+ return;
+ }
+
+ preempt_disable();
+ if (GET_APIC_ID(read_apic_id()) != boot_cpu_physical_apicid) {
+ panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
+ GET_APIC_ID(read_apic_id()), boot_cpu_physical_apicid);
+ /* Or can we switch back to PIC here? */
+ }
+ preempt_enable();
+
+#ifdef CONFIG_X86_32
+ connect_bsp_APIC();
+#endif
+ /*
+ * Switch from PIC to APIC mode.
+ */
+ setup_local_APIC();
+
+#ifdef CONFIG_X86_64
+ /*
+ * Enable IO APIC before setting up error vector
+ */
+ if (!skip_ioapic_setup && nr_ioapics)
+ enable_IO_APIC();
+#endif
+ end_local_APIC_setup();
+
+ map_cpu_to_logical_apicid();
+
+ setup_portio_remap();
+
+ smpboot_setup_io_apic();
+ /*
+ * Set up local APIC timer on boot CPU.
+ */
+
+ printk(KERN_INFO "CPU%d: ", 0);
+ print_cpu_info(&cpu_data(0));
+ setup_boot_clock();
+}
+/*
+ * Early setup to make printk work.
+ */
+void __init native_smp_prepare_boot_cpu(void)
+{
+ int me = smp_processor_id();
+#ifdef CONFIG_X86_32
+ init_gdt(me);
+ switch_to_new_gdt();
+#endif
+ /* already set me in cpu_online_map in boot_cpu_init() */
+ cpu_set(me, cpu_callout_map);
+ per_cpu(cpu_state, me) = CPU_ONLINE;
+}
+
void __init native_smp_cpus_done(unsigned int max_cpus)
{
+ Dprintk("Boot done.\n");
+
+ impress_friends();
+ smp_checks();
#ifdef CONFIG_X86_IO_APIC
setup_ioapic_dest();
#endif
+ check_nmi_watchdog();
+#ifdef CONFIG_X86_32
zap_low_mappings();
+#endif
}
-void __init smp_intr_init(void)
+#ifdef CONFIG_HOTPLUG_CPU
+
+# ifdef CONFIG_X86_32
+void cpu_exit_clear(void)
{
- /*
- * IRQ0 must be given a fixed assignment and initialized,
- * because it's used before the IO-APIC is set up.
- */
- set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+ int cpu = raw_smp_processor_id();
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+ idle_task_exit();
- /* IPI for invalidation */
- set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+ cpu_uninit();
+ irq_ctx_exit(cpu);
- /* IPI for generic function call */
- set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+ cpu_clear(cpu, cpu_callout_map);
+ cpu_clear(cpu, cpu_callin_map);
+
+ unmap_cpu_to_logical_apicid(cpu);
}
+# endif /* CONFIG_X86_32 */
+
+void remove_siblinginfo(int cpu)
+{
+ int sibling;
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+ for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
+ cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
+ /*/
+ * last thread sibling in this cpu core going down
+ */
+ if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
+ cpu_data(sibling).booted_cores--;
+ }
+
+ for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
+ cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
+ cpus_clear(per_cpu(cpu_sibling_map, cpu));
+ cpus_clear(per_cpu(cpu_core_map, cpu));
+ c->phys_proc_id = 0;
+ c->cpu_core_id = 0;
+ cpu_clear(cpu, cpu_sibling_setup_map);
+}
+
+int additional_cpus __initdata = -1;
+
+static __init int setup_additional_cpus(char *s)
+{
+ return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
+}
+early_param("additional_cpus", setup_additional_cpus);
+
+/*
+ * cpu_possible_map should be static, it cannot change as cpu's
+ * are onlined, or offlined. The reason is per-cpu data-structures
+ * are allocated by some modules at init time, and dont expect to
+ * do this dynamically on cpu arrival/departure.
+ * cpu_present_map on the other hand can change dynamically.
+ * In case when cpu_hotplug is not compiled, then we resort to current
+ * behaviour, which is cpu_possible == cpu_present.
+ * - Ashok Raj
+ *
+ * Three ways to find out the number of additional hotplug CPUs:
+ * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
+ * - The user can overwrite it with additional_cpus=NUM
+ * - Otherwise don't reserve additional CPUs.
+ * We do this because additional CPUs waste a lot of memory.
+ * -AK
+ */
+__init void prefill_possible_map(void)
+{
+ int i;
+ int possible;
+
+ if (additional_cpus == -1) {
+ if (disabled_cpus > 0)
+ additional_cpus = disabled_cpus;
+ else
+ additional_cpus = 0;
+ }
+ possible = num_processors + additional_cpus;
+ if (possible > NR_CPUS)
+ possible = NR_CPUS;
+
+ printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
+ possible, max_t(int, possible - num_processors, 0));
+
+ for (i = 0; i < possible; i++)
+ cpu_set(i, cpu_possible_map);
+}
+
+static void __ref remove_cpu_from_maps(int cpu)
+{
+ cpu_clear(cpu, cpu_online_map);
+#ifdef CONFIG_X86_64
+ cpu_clear(cpu, cpu_callout_map);
+ cpu_clear(cpu, cpu_callin_map);
+ /* was set by cpu_init() */
+ clear_bit(cpu, (unsigned long *)&cpu_initialized);
+ clear_node_cpumask(cpu);
+#endif
+}
+
+int __cpu_disable(void)
+{
+ int cpu = smp_processor_id();
+
+ /*
+ * Perhaps use cpufreq to drop frequency, but that could go
+ * into generic code.
+ *
+ * We won't take down the boot processor on i386 due to some
+ * interrupts only being able to be serviced by the BSP.
+ * Especially so if we're not using an IOAPIC -zwane
+ */
+ if (cpu == 0)
+ return -EBUSY;
+
+ if (nmi_watchdog == NMI_LOCAL_APIC)
+ stop_apic_nmi_watchdog(NULL);
+ clear_local_APIC();
+
+ /*
+ * HACK:
+ * Allow any queued timer interrupts to get serviced
+ * This is only a temporary solution until we cleanup
+ * fixup_irqs as we do for IA64.
+ */
+ local_irq_enable();
+ mdelay(1);
+
+ local_irq_disable();
+ remove_siblinginfo(cpu);
+
+ /* It's now safe to remove this processor from the online map */
+ remove_cpu_from_maps(cpu);
+ fixup_irqs(cpu_online_map);
+ return 0;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+ /* We don't do anything here: idle task is faking death itself. */
+ unsigned int i;
+
+ for (i = 0; i < 10; i++) {
+ /* They ack this in play_dead by setting CPU_DEAD */
+ if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
+ printk(KERN_INFO "CPU %d is now offline\n", cpu);
+ if (1 == num_online_cpus())
+ alternatives_smp_switch(0);
+ return;
+ }
+ msleep(100);
+ }
+ printk(KERN_ERR "CPU %u didn't die...\n", cpu);
+}
+#else /* ... !CONFIG_HOTPLUG_CPU */
+int __cpu_disable(void)
+{
+ return -ENOSYS;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+ /* We said "no" in __cpu_disable */
+ BUG();
+}
+#endif
/*
* If the BIOS enumerates physical processors before logical,
diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c
deleted file mode 100644
index 0880f2c..0000000
--- a/arch/x86/kernel/smpboot_64.c
+++ /dev/null
@@ -1,1108 +0,0 @@
-/*
- * x86 SMP booting functions
- *
- * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- * Copyright 2001 Andi Kleen, SuSE Labs.
- *
- * Much of the core SMP work is based on previous work by Thomas Radke, to
- * whom a great many thanks are extended.
- *
- * Thanks to Intel for making available several different Pentium,
- * Pentium Pro and Pentium-II/Xeon MP machines.
- * Original development of Linux SMP code supported by Caldera.
- *
- * This code is released under the GNU General Public License version 2
- *
- * Fixes
- * Felix Koop : NR_CPUS used properly
- * Jose Renau : Handle single CPU case.
- * Alan Cox : By repeated request 8) - Total BogoMIP report.
- * Greg Wright : Fix for kernel stacks panic.
- * Erich Boleyn : MP v1.4 and additional changes.
- * Matthias Sattler : Changes for 2.1 kernel map.
- * Michel Lespinasse : Changes for 2.1 kernel map.
- * Michael Chastain : Change trampoline.S to gnu as.
- * Alan Cox : Dumb bug: 'B' step PPro's are fine
- * Ingo Molnar : Added APIC timers, based on code
- * from Jose Renau
- * Ingo Molnar : various cleanups and rewrites
- * Tigran Aivazian : fixed "0.00 in /proc/uptime on SMP" bug.
- * Maciej W. Rozycki : Bits for genuine 82489DX APICs
- * Andi Kleen : Changed for SMP boot into long mode.
- * Rusty Russell : Hacked into shape for new "hotplug" boot process.
- * Andi Kleen : Converted to new state machine.
- * Various cleanups.
- * Probably mostly hotplug CPU ready now.
- * Ashok Raj : CPU hotplug support
- */
-
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/kernel_stat.h>
-#include <linux/bootmem.h>
-#include <linux/thread_info.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <linux/smp.h>
-#include <linux/kdebug.h>
-
-#include <asm/mtrr.h>
-#include <asm/pgalloc.h>
-#include <asm/desc.h>
-#include <asm/tlbflush.h>
-#include <asm/proto.h>
-#include <asm/nmi.h>
-#include <asm/irq.h>
-#include <asm/hw_irq.h>
-#include <asm/numa.h>
-
-/* Number of siblings per CPU package */
-int smp_num_siblings = 1;
-EXPORT_SYMBOL(smp_num_siblings);
-
-/* Last level cache ID of each logical CPU */
-DEFINE_PER_CPU(u16, cpu_llc_id) = BAD_APICID;
-
-/* Bitmask of currently online CPUs */
-cpumask_t cpu_online_map __read_mostly;
-
-EXPORT_SYMBOL(cpu_online_map);
-
-/*
- * Private maps to synchronize booting between AP and BP.
- * Probably not needed anymore, but it makes for easier debugging. -AK
- */
-cpumask_t cpu_callin_map;
-cpumask_t cpu_callout_map;
-cpumask_t cpu_possible_map;
-EXPORT_SYMBOL(cpu_possible_map);
-
-/* Per CPU bogomips and other parameters */
-DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
-EXPORT_PER_CPU_SYMBOL(cpu_info);
-
-/* Set when the idlers are all forked */
-int smp_threads_ready;
-
-/* representing HT siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_sibling_map);
-EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
-
-/* representing HT and core siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_core_map);
-EXPORT_PER_CPU_SYMBOL(cpu_core_map);
-
-/*
- * Trampoline 80x86 program as an array.
- */
-
-extern const unsigned char trampoline_data[];
-extern const unsigned char trampoline_end[];
-
-/* State of each CPU */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
-
-/*
- * Store all idle threads, this can be reused instead of creating
- * a new thread. Also avoids complicated thread destroy functionality
- * for idle threads.
- */
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is
- * removed after init for !CONFIG_HOTPLUG_CPU.
- */
-static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
-#define get_idle_for_cpu(x) (per_cpu(idle_thread_array, x))
-#define set_idle_for_cpu(x,p) (per_cpu(idle_thread_array, x) = (p))
-#else
-struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
-#define get_idle_for_cpu(x) (idle_thread_array[(x)])
-#define set_idle_for_cpu(x,p) (idle_thread_array[(x)] = (p))
-#endif
-
-
-/*
- * Currently trivial. Write the real->protected mode
- * bootstrap into the page concerned. The caller
- * has made sure it's suitably aligned.
- */
-
-static unsigned long __cpuinit setup_trampoline(void)
-{
- void *tramp = __va(SMP_TRAMPOLINE_BASE);
- memcpy(tramp, trampoline_data, trampoline_end - trampoline_data);
- return virt_to_phys(tramp);
-}
-
-/*
- * The bootstrap kernel entry code has set these up. Save them for
- * a given CPU
- */
-
-static void __cpuinit smp_store_cpu_info(int id)
-{
- struct cpuinfo_x86 *c = &cpu_data(id);
-
- *c = boot_cpu_data;
- c->cpu_index = id;
- identify_cpu(c);
- print_cpu_info(c);
-}
-
-static atomic_t init_deasserted __cpuinitdata;
-
-/*
- * Report back to the Boot Processor.
- * Running on AP.
- */
-void __cpuinit smp_callin(void)
-{
- int cpuid, phys_id;
- unsigned long timeout;
-
- /*
- * If waken up by an INIT in an 82489DX configuration
- * we may get here before an INIT-deassert IPI reaches
- * our local APIC. We have to wait for the IPI or we'll
- * lock up on an APIC access.
- */
- while (!atomic_read(&init_deasserted))
- cpu_relax();
-
- /*
- * (This works even if the APIC is not enabled.)
- */
- phys_id = GET_APIC_ID(apic_read(APIC_ID));
- cpuid = smp_processor_id();
- if (cpu_isset(cpuid, cpu_callin_map)) {
- panic("smp_callin: phys CPU#%d, CPU#%d already present??\n",
- phys_id, cpuid);
- }
- Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
-
- /*
- * STARTUP IPIs are fragile beasts as they might sometimes
- * trigger some glue motherboard logic. Complete APIC bus
- * silence for 1 second, this overestimates the time the
- * boot CPU is spending to send the up to 2 STARTUP IPIs
- * by a factor of two. This should be enough.
- */
-
- /*
- * Waiting 2s total for startup (udelay is not yet working)
- */
- timeout = jiffies + 2*HZ;
- while (time_before(jiffies, timeout)) {
- /*
- * Has the boot CPU finished it's STARTUP sequence?
- */
- if (cpu_isset(cpuid, cpu_callout_map))
- break;
- cpu_relax();
- }
-
- if (!time_before(jiffies, timeout)) {
- panic("smp_callin: CPU%d started up but did not get a callout!\n",
- cpuid);
- }
-
- /*
- * the boot CPU has finished the init stage and is spinning
- * on callin_map until we finish. We are free to set up this
- * CPU, first the APIC. (this is probably redundant on most
- * boards)
- */
-
- Dprintk("CALLIN, before setup_local_APIC().\n");
- setup_local_APIC();
- end_local_APIC_setup();
-
- /*
- * Get our bogomips.
- *
- * Need to enable IRQs because it can take longer and then
- * the NMI watchdog might kill us.
- */
- local_irq_enable();
- calibrate_delay();
- local_irq_disable();
- Dprintk("Stack at about %p\n",&cpuid);
-
- /*
- * Save our processor parameters
- */
- smp_store_cpu_info(cpuid);
-
- /*
- * Allow the master to continue.
- */
- cpu_set(cpuid, cpu_callin_map);
-}
-
-/* maps the cpu to the sched domain representing multi-core */
-cpumask_t cpu_coregroup_map(int cpu)
-{
- struct cpuinfo_x86 *c = &cpu_data(cpu);
- /*
- * For perf, we return last level cache shared map.
- * And for power savings, we return cpu_core_map
- */
- if (sched_mc_power_savings || sched_smt_power_savings)
- return per_cpu(cpu_core_map, cpu);
- else
- return c->llc_shared_map;
-}
-
-/* representing cpus for which sibling maps can be computed */
-static cpumask_t cpu_sibling_setup_map;
-
-static inline void set_cpu_sibling_map(int cpu)
-{
- int i;
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- cpu_set(cpu, cpu_sibling_setup_map);
-
- if (smp_num_siblings > 1) {
- for_each_cpu_mask(i, cpu_sibling_setup_map) {
- if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
- c->cpu_core_id == cpu_data(i).cpu_core_id) {
- cpu_set(i, per_cpu(cpu_sibling_map, cpu));
- cpu_set(cpu, per_cpu(cpu_sibling_map, i));
- cpu_set(i, per_cpu(cpu_core_map, cpu));
- cpu_set(cpu, per_cpu(cpu_core_map, i));
- cpu_set(i, c->llc_shared_map);
- cpu_set(cpu, cpu_data(i).llc_shared_map);
- }
- }
- } else {
- cpu_set(cpu, per_cpu(cpu_sibling_map, cpu));
- }
-
- cpu_set(cpu, c->llc_shared_map);
-
- if (current_cpu_data.x86_max_cores == 1) {
- per_cpu(cpu_core_map, cpu) = per_cpu(cpu_sibling_map, cpu);
- c->booted_cores = 1;
- return;
- }
-
- for_each_cpu_mask(i, cpu_sibling_setup_map) {
- if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
- per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
- cpu_set(i, c->llc_shared_map);
- cpu_set(cpu, cpu_data(i).llc_shared_map);
- }
- if (c->phys_proc_id == cpu_data(i).phys_proc_id) {
- cpu_set(i, per_cpu(cpu_core_map, cpu));
- cpu_set(cpu, per_cpu(cpu_core_map, i));
- /*
- * Does this new cpu bringup a new core?
- */
- if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1) {
- /*
- * for each core in package, increment
- * the booted_cores for this new cpu
- */
- if (first_cpu(per_cpu(cpu_sibling_map, i)) == i)
- c->booted_cores++;
- /*
- * increment the core count for all
- * the other cpus in this package
- */
- if (i != cpu)
- cpu_data(i).booted_cores++;
- } else if (i != cpu && !c->booted_cores)
- c->booted_cores = cpu_data(i).booted_cores;
- }
- }
-}
-
-/*
- * Setup code on secondary processor (after comming out of the trampoline)
- */
-void __cpuinit start_secondary(void)
-{
- /*
- * Dont put anything before smp_callin(), SMP
- * booting is too fragile that we want to limit the
- * things done here to the most necessary things.
- */
- cpu_init();
- preempt_disable();
- smp_callin();
-
- /* otherwise gcc will move up the smp_processor_id before the cpu_init */
- barrier();
-
- /*
- * Check TSC sync first:
- */
- check_tsc_sync_target();
-
- if (nmi_watchdog == NMI_IO_APIC) {
- disable_8259A_irq(0);
- enable_NMI_through_LVT0();
- enable_8259A_irq(0);
- }
-
- /*
- * The sibling maps must be set before turing the online map on for
- * this cpu
- */
- set_cpu_sibling_map(smp_processor_id());
-
- /*
- * We need to hold call_lock, so there is no inconsistency
- * between the time smp_call_function() determines number of
- * IPI recipients, and the time when the determination is made
- * for which cpus receive the IPI in genapic_flat.c. Holding this
- * lock helps us to not include this cpu in a currently in progress
- * smp_call_function().
- */
- lock_ipi_call_lock();
- spin_lock(&vector_lock);
-
- /* Setup the per cpu irq handling data structures */
- __setup_vector_irq(smp_processor_id());
- /*
- * Allow the master to continue.
- */
- cpu_set(smp_processor_id(), cpu_online_map);
- per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
- spin_unlock(&vector_lock);
-
- unlock_ipi_call_lock();
-
- setup_secondary_clock();
-
- cpu_idle();
-}
-
-extern volatile unsigned long init_rsp;
-extern void (*initial_code)(void);
-
-#ifdef APIC_DEBUG
-static void inquire_remote_apic(int apicid)
-{
- unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
- char *names[] = { "ID", "VERSION", "SPIV" };
- int timeout;
- u32 status;
-
- printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid);
-
- for (i = 0; i < ARRAY_SIZE(regs); i++) {
- printk(KERN_INFO "... APIC #%d %s: ", apicid, names[i]);
-
- /*
- * Wait for idle.
- */
- status = safe_apic_wait_icr_idle();
- if (status)
- printk(KERN_CONT
- "a previous APIC delivery may have failed\n");
-
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
- apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
-
- timeout = 0;
- do {
- udelay(100);
- status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK;
- } while (status == APIC_ICR_RR_INPROG && timeout++ < 1000);
-
- switch (status) {
- case APIC_ICR_RR_VALID:
- status = apic_read(APIC_RRR);
- printk(KERN_CONT "%08x\n", status);
- break;
- default:
- printk(KERN_CONT "failed\n");
- }
- }
-}
-#endif
-
-/*
- * Kick the secondary to wake up.
- */
-static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_rip)
-{
- unsigned long send_status, accept_status = 0;
- int maxlvt, num_starts, j;
-
- Dprintk("Asserting INIT.\n");
-
- /*
- * Turn INIT on target chip
- */
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
- /*
- * Send IPI
- */
- apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
- | APIC_DM_INIT);
-
- Dprintk("Waiting for send to finish...\n");
- send_status = safe_apic_wait_icr_idle();
-
- mdelay(10);
-
- Dprintk("Deasserting INIT.\n");
-
- /* Target chip */
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
- /* Send IPI */
- apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
-
- Dprintk("Waiting for send to finish...\n");
- send_status = safe_apic_wait_icr_idle();
-
- mb();
- atomic_set(&init_deasserted, 1);
-
- num_starts = 2;
-
- /*
- * Run STARTUP IPI loop.
- */
- Dprintk("#startup loops: %d.\n", num_starts);
-
- maxlvt = lapic_get_maxlvt();
-
- for (j = 1; j <= num_starts; j++) {
- Dprintk("Sending STARTUP #%d.\n",j);
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
- Dprintk("After apic_write.\n");
-
- /*
- * STARTUP IPI
- */
-
- /* Target chip */
- apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
- /* Boot on the stack */
- /* Kick the second */
- apic_write(APIC_ICR, APIC_DM_STARTUP | (start_rip >> 12));
-
- /*
- * Give the other CPU some time to accept the IPI.
- */
- udelay(300);
-
- Dprintk("Startup point 1.\n");
-
- Dprintk("Waiting for send to finish...\n");
- send_status = safe_apic_wait_icr_idle();
-
- /*
- * Give the other CPU some time to accept the IPI.
- */
- udelay(200);
- /*
- * Due to the Pentium erratum 3AP.
- */
- if (maxlvt > 3) {
- apic_write(APIC_ESR, 0);
- }
- accept_status = (apic_read(APIC_ESR) & 0xEF);
- if (send_status || accept_status)
- break;
- }
- Dprintk("After Startup.\n");
-
- if (send_status)
- printk(KERN_ERR "APIC never delivered???\n");
- if (accept_status)
- printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
-
- return (send_status | accept_status);
-}
-
-struct create_idle {
- struct work_struct work;
- struct task_struct *idle;
- struct completion done;
- int cpu;
-};
-
-static void __cpuinit do_fork_idle(struct work_struct *work)
-{
- struct create_idle *c_idle =
- container_of(work, struct create_idle, work);
-
- c_idle->idle = fork_idle(c_idle->cpu);
- complete(&c_idle->done);
-}
-
-/*
- * Boot one CPU.
- */
-static int __cpuinit do_boot_cpu(int cpu, int apicid)
-{
- unsigned long boot_error;
- int timeout;
- unsigned long start_rip;
- struct create_idle c_idle = {
- .cpu = cpu,
- .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
- };
- INIT_WORK(&c_idle.work, do_fork_idle);
-
- /* allocate memory for gdts of secondary cpus. Hotplug is considered */
- if (!cpu_gdt_descr[cpu].address &&
- !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
- printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu);
- return -1;
- }
-
- /* Allocate node local memory for AP pdas */
- if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
- struct x8664_pda *newpda, *pda;
- int node = cpu_to_node(cpu);
- pda = cpu_pda(cpu);
- newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC,
- node);
- if (newpda) {
- memcpy(newpda, pda, sizeof (struct x8664_pda));
- cpu_pda(cpu) = newpda;
- } else
- printk(KERN_ERR
- "Could not allocate node local PDA for CPU %d on node %d\n",
- cpu, node);
- }
-
- alternatives_smp_switch(1);
-
- c_idle.idle = get_idle_for_cpu(cpu);
-
- if (c_idle.idle) {
- c_idle.idle->thread.sp = (unsigned long) (((struct pt_regs *)
- (THREAD_SIZE + task_stack_page(c_idle.idle))) - 1);
- init_idle(c_idle.idle, cpu);
- goto do_rest;
- }
-
- /*
- * During cold boot process, keventd thread is not spun up yet.
- * When we do cpu hot-add, we create idle threads on the fly, we should
- * not acquire any attributes from the calling context. Hence the clean
- * way to create kernel_threads() is to do that from keventd().
- * We do the current_is_keventd() due to the fact that ACPI notifier
- * was also queuing to keventd() and when the caller is already running
- * in context of keventd(), we would end up with locking up the keventd
- * thread.
- */
- if (!keventd_up() || current_is_keventd())
- c_idle.work.func(&c_idle.work);
- else {
- schedule_work(&c_idle.work);
- wait_for_completion(&c_idle.done);
- }
-
- if (IS_ERR(c_idle.idle)) {
- printk("failed fork for CPU %d\n", cpu);
- return PTR_ERR(c_idle.idle);
- }
-
- set_idle_for_cpu(cpu, c_idle.idle);
-
-do_rest:
-
- cpu_pda(cpu)->pcurrent = c_idle.idle;
-
- start_rip = setup_trampoline();
-
- init_rsp = c_idle.idle->thread.sp;
- load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread);
- initial_code = start_secondary;
- clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
-
- printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu,
- cpus_weight(cpu_present_map),
- apicid);
-
- /*
- * This grunge runs the startup process for
- * the targeted processor.
- */
-
- atomic_set(&init_deasserted, 0);
-
- Dprintk("Setting warm reset code and vector.\n");
-
- CMOS_WRITE(0xa, 0xf);
- local_flush_tlb();
- Dprintk("1.\n");
- *((volatile unsigned short *) phys_to_virt(0x469)) = start_rip >> 4;
- Dprintk("2.\n");
- *((volatile unsigned short *) phys_to_virt(0x467)) = start_rip & 0xf;
- Dprintk("3.\n");
-
- /*
- * Be paranoid about clearing APIC errors.
- */
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
-
- /*
- * Status is now clean
- */
- boot_error = 0;
-
- /*
- * Starting actual IPI sequence...
- */
- boot_error = wakeup_secondary_via_INIT(apicid, start_rip);
-
- if (!boot_error) {
- /*
- * allow APs to start initializing.
- */
- Dprintk("Before Callout %d.\n", cpu);
- cpu_set(cpu, cpu_callout_map);
- Dprintk("After Callout %d.\n", cpu);
-
- /*
- * Wait 5s total for a response
- */
- for (timeout = 0; timeout < 50000; timeout++) {
- if (cpu_isset(cpu, cpu_callin_map))
- break; /* It has booted */
- udelay(100);
- }
-
- if (cpu_isset(cpu, cpu_callin_map)) {
- /* number CPUs logically, starting from 1 (BSP is 0) */
- Dprintk("CPU has booted.\n");
- } else {
- boot_error = 1;
- if (*((volatile unsigned char *)phys_to_virt(SMP_TRAMPOLINE_BASE))
- == 0xA5)
- /* trampoline started but...? */
- printk("Stuck ??\n");
- else
- /* trampoline code not run */
- printk("Not responding.\n");
-#ifdef APIC_DEBUG
- inquire_remote_apic(apicid);
-#endif
- }
- }
- if (boot_error) {
- cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
- clear_bit(cpu, (unsigned long *)&cpu_initialized); /* was set by cpu_init() */
- clear_node_cpumask(cpu); /* was set by numa_add_cpu */
- cpu_clear(cpu, cpu_present_map);
- cpu_clear(cpu, cpu_possible_map);
- per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
- return -EIO;
- }
-
- return 0;
-}
-
-cycles_t cacheflush_time;
-unsigned long cache_decay_ticks;
-
-/*
- * Cleanup possible dangling ends...
- */
-static __cpuinit void smp_cleanup_boot(void)
-{
- /*
- * Paranoid: Set warm reset code and vector here back
- * to default values.
- */
- CMOS_WRITE(0, 0xf);
-
- /*
- * Reset trampoline flag
- */
- *((volatile int *) phys_to_virt(0x467)) = 0;
-}
-
-/*
- * Fall back to non SMP mode after errors.
- *
- * RED-PEN audit/test this more. I bet there is more state messed up here.
- */
-static __init void disable_smp(void)
-{
- cpu_present_map = cpumask_of_cpu(0);
- cpu_possible_map = cpumask_of_cpu(0);
- if (smp_found_config)
- phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id);
- else
- phys_cpu_present_map = physid_mask_of_physid(0);
- cpu_set(0, per_cpu(cpu_sibling_map, 0));
- cpu_set(0, per_cpu(cpu_core_map, 0));
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-int additional_cpus __initdata = -1;
-
-/*
- * cpu_possible_map should be static, it cannot change as cpu's
- * are onlined, or offlined. The reason is per-cpu data-structures
- * are allocated by some modules at init time, and dont expect to
- * do this dynamically on cpu arrival/departure.
- * cpu_present_map on the other hand can change dynamically.
- * In case when cpu_hotplug is not compiled, then we resort to current
- * behaviour, which is cpu_possible == cpu_present.
- * - Ashok Raj
- *
- * Three ways to find out the number of additional hotplug CPUs:
- * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
- * - The user can overwrite it with additional_cpus=NUM
- * - Otherwise don't reserve additional CPUs.
- * We do this because additional CPUs waste a lot of memory.
- * -AK
- */
-__init void prefill_possible_map(void)
-{
- int i;
- int possible;
-
- if (additional_cpus == -1) {
- if (disabled_cpus > 0)
- additional_cpus = disabled_cpus;
- else
- additional_cpus = 0;
- }
- possible = num_processors + additional_cpus;
- if (possible > NR_CPUS)
- possible = NR_CPUS;
-
- printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
- possible,
- max_t(int, possible - num_processors, 0));
-
- for (i = 0; i < possible; i++)
- cpu_set(i, cpu_possible_map);
-}
-#endif
-
-/*
- * Various sanity checks.
- */
-static int __init smp_sanity_check(unsigned max_cpus)
-{
- if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
- printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
- hard_smp_processor_id());
- physid_set(hard_smp_processor_id(), phys_cpu_present_map);
- }
-
- /*
- * If we couldn't find an SMP configuration at boot time,
- * get out of here now!
- */
- if (!smp_found_config) {
- printk(KERN_NOTICE "SMP motherboard not detected.\n");
- disable_smp();
- if (APIC_init_uniprocessor())
- printk(KERN_NOTICE "Local APIC not detected."
- " Using dummy APIC emulation.\n");
- return -1;
- }
-
- /*
- * Should not be necessary because the MP table should list the boot
- * CPU too, but we do it for the sake of robustness anyway.
- */
- if (!physid_isset(boot_cpu_id, phys_cpu_present_map)) {
- printk(KERN_NOTICE "weird, boot CPU (#%d) not listed by the BIOS.\n",
- boot_cpu_id);
- physid_set(hard_smp_processor_id(), phys_cpu_present_map);
- }
-
- /*
- * If we couldn't find a local APIC, then get out of here now!
- */
- if (!cpu_has_apic) {
- printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
- boot_cpu_id);
- printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
- nr_ioapics = 0;
- return -1;
- }
-
- /*
- * If SMP should be disabled, then really disable it!
- */
- if (!max_cpus) {
- printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
- nr_ioapics = 0;
- return -1;
- }
-
- return 0;
-}
-
-static void __init smp_cpu_index_default(void)
-{
- int i;
- struct cpuinfo_x86 *c;
-
- for_each_cpu_mask(i, cpu_possible_map) {
- c = &cpu_data(i);
- /* mark all to hotplug */
- c->cpu_index = NR_CPUS;
- }
-}
-
-/*
- * Prepare for SMP bootup. The MP table or ACPI has been read
- * earlier. Just do some sanity checking here and enable APIC mode.
- */
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
- nmi_watchdog_default();
- smp_cpu_index_default();
- current_cpu_data = boot_cpu_data;
- current_thread_info()->cpu = 0; /* needed? */
- set_cpu_sibling_map(0);
-
- if (smp_sanity_check(max_cpus) < 0) {
- printk(KERN_INFO "SMP disabled\n");
- disable_smp();
- return;
- }
-
-
- /*
- * Switch from PIC to APIC mode.
- */
- setup_local_APIC();
-
- /*
- * Enable IO APIC before setting up error vector
- */
- if (!skip_ioapic_setup && nr_ioapics)
- enable_IO_APIC();
- end_local_APIC_setup();
-
- if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id) {
- panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
- GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_id);
- /* Or can we switch back to PIC here? */
- }
-
- /*
- * Now start the IO-APICs
- */
- if (!skip_ioapic_setup && nr_ioapics)
- setup_IO_APIC();
- else
- nr_ioapics = 0;
-
- /*
- * Set up local APIC timer on boot CPU.
- */
-
- setup_boot_clock();
-}
-
-/*
- * Early setup to make printk work.
- */
-void __init smp_prepare_boot_cpu(void)
-{
- int me = smp_processor_id();
- /* already set me in cpu_online_map in boot_cpu_init() */
- cpu_set(me, cpu_callout_map);
- per_cpu(cpu_state, me) = CPU_ONLINE;
-}
-
-/*
- * Entry point to boot a CPU.
- */
-int __cpuinit __cpu_up(unsigned int cpu)
-{
- int apicid = cpu_present_to_apicid(cpu);
- unsigned long flags;
- int err;
-
- WARN_ON(irqs_disabled());
-
- Dprintk("++++++++++++++++++++=_---CPU UP %u\n", cpu);
-
- if (apicid == BAD_APICID || apicid == boot_cpu_id ||
- !physid_isset(apicid, phys_cpu_present_map)) {
- printk("__cpu_up: bad cpu %d\n", cpu);
- return -EINVAL;
- }
-
- /*
- * Already booted CPU?
- */
- if (cpu_isset(cpu, cpu_callin_map)) {
- Dprintk("do_boot_cpu %d Already started\n", cpu);
- return -ENOSYS;
- }
-
- /*
- * Save current MTRR state in case it was changed since early boot
- * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
- */
- mtrr_save_state();
-
- per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
- /* Boot it! */
- err = do_boot_cpu(cpu, apicid);
- if (err < 0) {
- Dprintk("do_boot_cpu failed %d\n", err);
- return err;
- }
-
- /* Unleash the CPU! */
- Dprintk("waiting for cpu %d\n", cpu);
-
- /*
- * Make sure and check TSC sync:
- */
- local_irq_save(flags);
- check_tsc_sync_source(cpu);
- local_irq_restore(flags);
-
- while (!cpu_isset(cpu, cpu_online_map))
- cpu_relax();
- err = 0;
-
- return err;
-}
-
-/*
- * Finish the SMP boot.
- */
-void __init smp_cpus_done(unsigned int max_cpus)
-{
- smp_cleanup_boot();
- setup_ioapic_dest();
- check_nmi_watchdog();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-static void remove_siblinginfo(int cpu)
-{
- int sibling;
- struct cpuinfo_x86 *c = &cpu_data(cpu);
-
- for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
- cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
- /*
- * last thread sibling in this cpu core going down
- */
- if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
- cpu_data(sibling).booted_cores--;
- }
-
- for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
- cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
- cpus_clear(per_cpu(cpu_sibling_map, cpu));
- cpus_clear(per_cpu(cpu_core_map, cpu));
- c->phys_proc_id = 0;
- c->cpu_core_id = 0;
- cpu_clear(cpu, cpu_sibling_setup_map);
-}
-
-static void __ref remove_cpu_from_maps(void)
-{
- int cpu = smp_processor_id();
-
- cpu_clear(cpu, cpu_callout_map);
- cpu_clear(cpu, cpu_callin_map);
- clear_bit(cpu, (unsigned long *)&cpu_initialized); /* was set by cpu_init() */
- clear_node_cpumask(cpu);
-}
-
-int __cpu_disable(void)
-{
- int cpu = smp_processor_id();
-
- /*
- * Perhaps use cpufreq to drop frequency, but that could go
- * into generic code.
- *
- * We won't take down the boot processor on i386 due to some
- * interrupts only being able to be serviced by the BSP.
- * Especially so if we're not using an IOAPIC -zwane
- */
- if (cpu == 0)
- return -EBUSY;
-
- if (nmi_watchdog == NMI_LOCAL_APIC)
- stop_apic_nmi_watchdog(NULL);
- clear_local_APIC();
-
- /*
- * HACK:
- * Allow any queued timer interrupts to get serviced
- * This is only a temporary solution until we cleanup
- * fixup_irqs as we do for IA64.
- */
- local_irq_enable();
- mdelay(1);
-
- local_irq_disable();
- remove_siblinginfo(cpu);
-
- spin_lock(&vector_lock);
- /* It's now safe to remove this processor from the online map */
- cpu_clear(cpu, cpu_online_map);
- spin_unlock(&vector_lock);
- remove_cpu_from_maps();
- fixup_irqs(cpu_online_map);
- return 0;
-}
-
-void __cpu_die(unsigned int cpu)
-{
- /* We don't do anything here: idle task is faking death itself. */
- unsigned int i;
-
- for (i = 0; i < 10; i++) {
- /* They ack this in play_dead by setting CPU_DEAD */
- if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
- printk ("CPU %d is now offline\n", cpu);
- if (1 == num_online_cpus())
- alternatives_smp_switch(0);
- return;
- }
- msleep(100);
- }
- printk(KERN_ERR "CPU %u didn't die...\n", cpu);
-}
-
-static __init int setup_additional_cpus(char *s)
-{
- return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
-}
-early_param("additional_cpus", setup_additional_cpus);
-
-#else /* ... !CONFIG_HOTPLUG_CPU */
-
-int __cpu_disable(void)
-{
- return -ENOSYS;
-}
-
-void __cpu_die(unsigned int cpu)
-{
- /* We said "no" in __cpu_disable */
- BUG();
-}
-#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
new file mode 100644
index 0000000..3449064
--- /dev/null
+++ b/arch/x86/kernel/smpcommon.c
@@ -0,0 +1,83 @@
+/*
+ * SMP stuff which is common to all sub-architectures.
+ */
+#include <linux/module.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_X86_32
+DEFINE_PER_CPU(unsigned long, this_cpu_off);
+EXPORT_PER_CPU_SYMBOL(this_cpu_off);
+
+/* Initialize the CPU's GDT. This is either the boot CPU doing itself
+ (still using the master per-cpu area), or a CPU doing it for a
+ secondary which will soon come up. */
+__cpuinit void init_gdt(int cpu)
+{
+ struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+
+ pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
+ __per_cpu_offset[cpu], 0xFFFFF,
+ 0x2 | DESCTYPE_S, 0x8);
+
+ gdt[GDT_ENTRY_PERCPU].s = 1;
+
+ per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
+ per_cpu(cpu_number, cpu) = cpu;
+}
+#endif
+
+/**
+ * smp_call_function(): Run a function on all other CPUs.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Unused.
+ * @wait: If true, wait (atomically) until function has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
+ int wait)
+{
+ return smp_call_function_mask(cpu_online_map, func, info, wait);
+}
+EXPORT_SYMBOL(smp_call_function);
+
+/**
+ * smp_call_function_single - Run a function on a specific CPU
+ * @cpu: The target CPU. Cannot be the calling CPU.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Unused.
+ * @wait: If true, wait until function has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ */
+int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+ int nonatomic, int wait)
+{
+ /* prevent preemption and reschedule on another processor */
+ int ret;
+ int me = get_cpu();
+ if (cpu == me) {
+ local_irq_disable();
+ func(info);
+ local_irq_enable();
+ put_cpu();
+ return 0;
+ }
+
+ ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
+
+ put_cpu();
+ return ret;
+}
+EXPORT_SYMBOL(smp_call_function_single);
diff --git a/arch/x86/kernel/smpcommon_32.c b/arch/x86/kernel/smpcommon_32.c
index 8bc38af..8b13789 100644
--- a/arch/x86/kernel/smpcommon_32.c
+++ b/arch/x86/kernel/smpcommon_32.c
@@ -1,82 +1 @@
-/*
- * SMP stuff which is common to all sub-architectures.
- */
-#include <linux/module.h>
-#include <asm/smp.h>
-DEFINE_PER_CPU(unsigned long, this_cpu_off);
-EXPORT_PER_CPU_SYMBOL(this_cpu_off);
-
-/* Initialize the CPU's GDT. This is either the boot CPU doing itself
- (still using the master per-cpu area), or a CPU doing it for a
- secondary which will soon come up. */
-__cpuinit void init_gdt(int cpu)
-{
- struct desc_struct *gdt = get_cpu_gdt_table(cpu);
-
- pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
- __per_cpu_offset[cpu], 0xFFFFF,
- 0x2 | DESCTYPE_S, 0x8);
-
- gdt[GDT_ENTRY_PERCPU].s = 1;
-
- per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
- per_cpu(cpu_number, cpu) = cpu;
-}
-
-
-/**
- * smp_call_function(): Run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
- int wait)
-{
- return smp_call_function_mask(cpu_online_map, func, info, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-/**
- * smp_call_function_single - Run a function on a specific CPU
- * @cpu: The target CPU. Cannot be the calling CPU.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- */
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
- int nonatomic, int wait)
-{
- /* prevent preemption and reschedule on another processor */
- int ret;
- int me = get_cpu();
- if (cpu == me) {
- local_irq_disable();
- func(info);
- local_irq_enable();
- put_cpu();
- return 0;
- }
-
- ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
-
- put_cpu();
- return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c
index b72e613..70e4a37 100644
--- a/arch/x86/kernel/srat_32.c
+++ b/arch/x86/kernel/srat_32.c
@@ -277,14 +277,14 @@
rsdp_address = acpi_os_get_root_pointer();
if (!rsdp_address) {
printk("%s: System description tables not found\n",
- __FUNCTION__);
+ __func__);
goto out_err;
}
- printk("%s: assigning address to rsdp\n", __FUNCTION__);
+ printk("%s: assigning address to rsdp\n", __func__);
rsdp = (struct acpi_table_rsdp *)(u32)rsdp_address;
if (!rsdp) {
- printk("%s: Didn't find ACPI root!\n", __FUNCTION__);
+ printk("%s: Didn't find ACPI root!\n", __func__);
goto out_err;
}
@@ -292,7 +292,7 @@
rsdp->oem_id);
if (strncmp(rsdp->signature, ACPI_SIG_RSDP,strlen(ACPI_SIG_RSDP))) {
- printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __func__);
goto out_err;
}
@@ -302,7 +302,7 @@
if (!rsdt) {
printk(KERN_WARNING
"%s: ACPI: Invalid root system description tables (RSDT)\n",
- __FUNCTION__);
+ __func__);
goto out_err;
}
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 9d406cd..92c20fe 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -140,12 +140,15 @@
*/
static void write_debugctlmsr(struct task_struct *child, unsigned long val)
{
+ if (child->thread.debugctlmsr == val)
+ return;
+
child->thread.debugctlmsr = val;
if (child != current)
return;
- wrmsrl(MSR_IA32_DEBUGCTLMSR, val);
+ update_debugctlmsr(val);
}
/*
@@ -165,11 +168,11 @@
write_debugctlmsr(child,
child->thread.debugctlmsr | DEBUGCTLMSR_BTF);
} else {
- write_debugctlmsr(child,
- child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
+ write_debugctlmsr(child,
+ child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
- if (!child->thread.debugctlmsr)
- clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
+ if (!child->thread.debugctlmsr)
+ clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
}
}
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 72f4634..6878a9c 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -35,43 +35,47 @@
static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata;
static struct rio_detail *rio_devs[MAX_NUMNODES*4] __initdata;
+static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+
static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
{
int twister = 0, node = 0;
int i, bus, num_buses;
- for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
- if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id){
+ for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
+ if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
twister = rio_devs[i]->owner_id;
break;
}
}
- if (i == rio_table_hdr->num_rio_dev){
- printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __FUNCTION__);
+ if (i == rio_table_hdr->num_rio_dev) {
+ printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
return last_bus;
}
- for(i = 0; i < rio_table_hdr->num_scal_dev; i++){
- if (scal_devs[i]->node_id == twister){
+ for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
+ if (scal_devs[i]->node_id == twister) {
node = scal_devs[i]->node_id;
break;
}
}
- if (i == rio_table_hdr->num_scal_dev){
- printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __FUNCTION__);
+ if (i == rio_table_hdr->num_scal_dev) {
+ printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
return last_bus;
}
- switch (rio_devs[wpeg_num]->type){
+ switch (rio_devs[wpeg_num]->type) {
case CompatWPEG:
- /* The Compatibility Winnipeg controls the 2 legacy buses,
+ /*
+ * The Compatibility Winnipeg controls the 2 legacy buses,
* the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
* a PCI-PCI bridge card is used in either slot: total 5 buses.
*/
num_buses = 5;
break;
case AltWPEG:
- /* The Alternate Winnipeg controls the 2 133MHz buses [1 slot
+ /*
+ * The Alternate Winnipeg controls the 2 133MHz buses [1 slot
* each], their 2 "extra" buses, the 100MHz bus [2 slots] and
* the "extra" buses for each of those slots: total 7 buses.
*/
@@ -79,17 +83,18 @@
break;
case LookOutAWPEG:
case LookOutBWPEG:
- /* A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
+ /*
+ * A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
* & the "extra" buses for each of those slots: total 9 buses.
*/
num_buses = 9;
break;
default:
- printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __FUNCTION__);
+ printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
return last_bus;
}
- for(bus = last_bus; bus < last_bus + num_buses; bus++)
+ for (bus = last_bus; bus < last_bus + num_buses; bus++)
mp_bus_id_to_node[bus] = node;
return bus;
}
@@ -99,14 +104,14 @@
unsigned long ptr;
int i, scal_detail_size, rio_detail_size;
- if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
- printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __FUNCTION__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+ if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
+ printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
return 0;
}
- switch (rio_table_hdr->version){
+ switch (rio_table_hdr->version) {
default:
- printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __FUNCTION__, rio_table_hdr->version);
+ printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
return 0;
case 2:
scal_detail_size = 11;
@@ -119,10 +124,10 @@
}
ptr = (unsigned long)rio_table_hdr + 3;
- for(i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
+ for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
scal_devs[i] = (struct scal_detail *)ptr;
- for(i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
+ for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
rio_devs[i] = (struct rio_detail *)ptr;
return 1;
@@ -140,9 +145,9 @@
rio_table_hdr = NULL;
offset = 0x180;
- while (offset){
+ while (offset) {
/* The block id is stored in the 2nd word */
- if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
+ if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
/* set the pointer past the offset & block id */
rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
break;
@@ -150,8 +155,8 @@
/* The next offset is stored in the 1st word. 0 means no more */
offset = *((unsigned short *)(ptr + offset));
}
- if (!rio_table_hdr){
- printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __FUNCTION__);
+ if (!rio_table_hdr) {
+ printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
return;
}
@@ -161,8 +166,8 @@
/* The first Winnipeg we're looking for has an index of 0 */
next_wpeg = 0;
do {
- for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
- if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg){
+ for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
+ if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
/* It's the Winnipeg we're looking for! */
next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
next_wpeg++;
diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c
index 9d498c2..170d43c 100644
--- a/arch/x86/kernel/syscall_64.c
+++ b/arch/x86/kernel/syscall_64.c
@@ -1,4 +1,4 @@
-/* System call table for x86-64. */
+/* System call table for x86-64. */
#include <linux/linkage.h>
#include <linux/sys.h>
@@ -7,20 +7,23 @@
#define __NO_STUBS
-#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
+#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
#undef _ASM_X86_64_UNISTD_H_
#include <asm/unistd_64.h>
#undef __SYSCALL
-#define __SYSCALL(nr, sym) [ nr ] = sym,
+#define __SYSCALL(nr, sym) [nr] = sym,
#undef _ASM_X86_64_UNISTD_H_
-typedef void (*sys_call_ptr_t)(void);
+typedef void (*sys_call_ptr_t)(void);
extern void sys_ni_syscall(void);
const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
- /* Smells like a like a compiler bug -- it doesn't work when the & below is removed. */
+ /*
+ *Smells like a like a compiler bug -- it doesn't work
+ *when the & below is removed.
+ */
[0 ... __NR_syscall_max] = &sys_ni_syscall,
#include <asm/unistd_64.h>
};
diff --git a/arch/x86/kernel/test_nx.c b/arch/x86/kernel/test_nx.c
index 10b8a6f..787a5e4 100644
--- a/arch/x86/kernel/test_nx.c
+++ b/arch/x86/kernel/test_nx.c
@@ -11,6 +11,8 @@
*/
#include <linux/module.h>
#include <linux/sort.h>
+#include <linux/slab.h>
+
#include <asm/uaccess.h>
#include <asm/asm.h>
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
new file mode 100644
index 0000000..9bb2363
--- /dev/null
+++ b/arch/x86/kernel/tlb_32.c
@@ -0,0 +1,243 @@
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+
+#include <asm/tlbflush.h>
+
+DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate)
+ ____cacheline_aligned = { &init_mm, 0, };
+
+/* must come after the send_IPI functions above for inlining */
+#include <mach_ipi.h>
+
+/*
+ * Smarter SMP flushing macros.
+ * c/o Linus Torvalds.
+ *
+ * These mean you can really definitely utterly forget about
+ * writing to user space from interrupts. (Its not allowed anyway).
+ *
+ * Optimizations Manfred Spraul <manfred@colorfullife.com>
+ */
+
+static cpumask_t flush_cpumask;
+static struct mm_struct *flush_mm;
+static unsigned long flush_va;
+static DEFINE_SPINLOCK(tlbstate_lock);
+
+/*
+ * We cannot call mmdrop() because we are in interrupt context,
+ * instead update mm->cpu_vm_mask.
+ *
+ * We need to reload %cr3 since the page tables may be going
+ * away from under us..
+ */
+void leave_mm(int cpu)
+{
+ if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
+ BUG();
+ cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask);
+ load_cr3(swapper_pg_dir);
+}
+EXPORT_SYMBOL_GPL(leave_mm);
+
+/*
+ *
+ * The flush IPI assumes that a thread switch happens in this order:
+ * [cpu0: the cpu that switches]
+ * 1) switch_mm() either 1a) or 1b)
+ * 1a) thread switch to a different mm
+ * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
+ * Stop ipi delivery for the old mm. This is not synchronized with
+ * the other cpus, but smp_invalidate_interrupt ignore flush ipis
+ * for the wrong mm, and in the worst case we perform a superfluous
+ * tlb flush.
+ * 1a2) set cpu_tlbstate to TLBSTATE_OK
+ * Now the smp_invalidate_interrupt won't call leave_mm if cpu0
+ * was in lazy tlb mode.
+ * 1a3) update cpu_tlbstate[].active_mm
+ * Now cpu0 accepts tlb flushes for the new mm.
+ * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
+ * Now the other cpus will send tlb flush ipis.
+ * 1a4) change cr3.
+ * 1b) thread switch without mm change
+ * cpu_tlbstate[].active_mm is correct, cpu0 already handles
+ * flush ipis.
+ * 1b1) set cpu_tlbstate to TLBSTATE_OK
+ * 1b2) test_and_set the cpu bit in cpu_vm_mask.
+ * Atomically set the bit [other cpus will start sending flush ipis],
+ * and test the bit.
+ * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
+ * 2) switch %%esp, ie current
+ *
+ * The interrupt must handle 2 special cases:
+ * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
+ * - the cpu performs speculative tlb reads, i.e. even if the cpu only
+ * runs in kernel space, the cpu could load tlb entries for user space
+ * pages.
+ *
+ * The good news is that cpu_tlbstate is local to each cpu, no
+ * write/read ordering problems.
+ */
+
+/*
+ * TLB flush IPI:
+ *
+ * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
+ * 2) Leave the mm if we are in the lazy tlb mode.
+ */
+
+void smp_invalidate_interrupt(struct pt_regs *regs)
+{
+ unsigned long cpu;
+
+ cpu = get_cpu();
+
+ if (!cpu_isset(cpu, flush_cpumask))
+ goto out;
+ /*
+ * This was a BUG() but until someone can quote me the
+ * line from the intel manual that guarantees an IPI to
+ * multiple CPUs is retried _only_ on the erroring CPUs
+ * its staying as a return
+ *
+ * BUG();
+ */
+
+ if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) {
+ if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) {
+ if (flush_va == TLB_FLUSH_ALL)
+ local_flush_tlb();
+ else
+ __flush_tlb_one(flush_va);
+ } else
+ leave_mm(cpu);
+ }
+ ack_APIC_irq();
+ smp_mb__before_clear_bit();
+ cpu_clear(cpu, flush_cpumask);
+ smp_mb__after_clear_bit();
+out:
+ put_cpu_no_resched();
+ __get_cpu_var(irq_stat).irq_tlb_count++;
+}
+
+void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
+ unsigned long va)
+{
+ cpumask_t cpumask = *cpumaskp;
+
+ /*
+ * A couple of (to be removed) sanity checks:
+ *
+ * - current CPU must not be in mask
+ * - mask must exist :)
+ */
+ BUG_ON(cpus_empty(cpumask));
+ BUG_ON(cpu_isset(smp_processor_id(), cpumask));
+ BUG_ON(!mm);
+
+#ifdef CONFIG_HOTPLUG_CPU
+ /* If a CPU which we ran on has gone down, OK. */
+ cpus_and(cpumask, cpumask, cpu_online_map);
+ if (unlikely(cpus_empty(cpumask)))
+ return;
+#endif
+
+ /*
+ * i'm not happy about this global shared spinlock in the
+ * MM hot path, but we'll see how contended it is.
+ * AK: x86-64 has a faster method that could be ported.
+ */
+ spin_lock(&tlbstate_lock);
+
+ flush_mm = mm;
+ flush_va = va;
+ cpus_or(flush_cpumask, cpumask, flush_cpumask);
+ /*
+ * We have to send the IPI only to
+ * CPUs affected.
+ */
+ send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR);
+
+ while (!cpus_empty(flush_cpumask))
+ /* nothing. lockup detection does not belong here */
+ cpu_relax();
+
+ flush_mm = NULL;
+ flush_va = 0;
+ spin_unlock(&tlbstate_lock);
+}
+
+void flush_tlb_current_task(void)
+{
+ struct mm_struct *mm = current->mm;
+ cpumask_t cpu_mask;
+
+ preempt_disable();
+ cpu_mask = mm->cpu_vm_mask;
+ cpu_clear(smp_processor_id(), cpu_mask);
+
+ local_flush_tlb();
+ if (!cpus_empty(cpu_mask))
+ flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
+ preempt_enable();
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ cpumask_t cpu_mask;
+
+ preempt_disable();
+ cpu_mask = mm->cpu_vm_mask;
+ cpu_clear(smp_processor_id(), cpu_mask);
+
+ if (current->active_mm == mm) {
+ if (current->mm)
+ local_flush_tlb();
+ else
+ leave_mm(smp_processor_id());
+ }
+ if (!cpus_empty(cpu_mask))
+ flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
+
+ preempt_enable();
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ cpumask_t cpu_mask;
+
+ preempt_disable();
+ cpu_mask = mm->cpu_vm_mask;
+ cpu_clear(smp_processor_id(), cpu_mask);
+
+ if (current->active_mm == mm) {
+ if (current->mm)
+ __flush_tlb_one(va);
+ else
+ leave_mm(smp_processor_id());
+ }
+
+ if (!cpus_empty(cpu_mask))
+ flush_tlb_others(cpu_mask, mm, va);
+
+ preempt_enable();
+}
+EXPORT_SYMBOL(flush_tlb_page);
+
+static void do_flush_tlb_all(void *info)
+{
+ unsigned long cpu = smp_processor_id();
+
+ __flush_tlb_all();
+ if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY)
+ leave_mm(cpu);
+}
+
+void flush_tlb_all(void)
+{
+ on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
+}
+
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
new file mode 100644
index 0000000..1558e51
--- /dev/null
+++ b/arch/x86/kernel/tlb_64.c
@@ -0,0 +1,274 @@
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/interrupt.h>
+
+#include <asm/mtrr.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/proto.h>
+#include <asm/apicdef.h>
+#include <asm/idle.h>
+
+#include <mach_ipi.h>
+/*
+ * Smarter SMP flushing macros.
+ * c/o Linus Torvalds.
+ *
+ * These mean you can really definitely utterly forget about
+ * writing to user space from interrupts. (Its not allowed anyway).
+ *
+ * Optimizations Manfred Spraul <manfred@colorfullife.com>
+ *
+ * More scalable flush, from Andi Kleen
+ *
+ * To avoid global state use 8 different call vectors.
+ * Each CPU uses a specific vector to trigger flushes on other
+ * CPUs. Depending on the received vector the target CPUs look into
+ * the right per cpu variable for the flush data.
+ *
+ * With more than 8 CPUs they are hashed to the 8 available
+ * vectors. The limited global vector space forces us to this right now.
+ * In future when interrupts are split into per CPU domains this could be
+ * fixed, at the cost of triggering multiple IPIs in some cases.
+ */
+
+union smp_flush_state {
+ struct {
+ cpumask_t flush_cpumask;
+ struct mm_struct *flush_mm;
+ unsigned long flush_va;
+ spinlock_t tlbstate_lock;
+ };
+ char pad[SMP_CACHE_BYTES];
+} ____cacheline_aligned;
+
+/* State is put into the per CPU data section, but padded
+ to a full cache line because other CPUs can access it and we don't
+ want false sharing in the per cpu data segment. */
+static DEFINE_PER_CPU(union smp_flush_state, flush_state);
+
+/*
+ * We cannot call mmdrop() because we are in interrupt context,
+ * instead update mm->cpu_vm_mask.
+ */
+void leave_mm(int cpu)
+{
+ if (read_pda(mmu_state) == TLBSTATE_OK)
+ BUG();
+ cpu_clear(cpu, read_pda(active_mm)->cpu_vm_mask);
+ load_cr3(swapper_pg_dir);
+}
+EXPORT_SYMBOL_GPL(leave_mm);
+
+/*
+ *
+ * The flush IPI assumes that a thread switch happens in this order:
+ * [cpu0: the cpu that switches]
+ * 1) switch_mm() either 1a) or 1b)
+ * 1a) thread switch to a different mm
+ * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
+ * Stop ipi delivery for the old mm. This is not synchronized with
+ * the other cpus, but smp_invalidate_interrupt ignore flush ipis
+ * for the wrong mm, and in the worst case we perform a superfluous
+ * tlb flush.
+ * 1a2) set cpu mmu_state to TLBSTATE_OK
+ * Now the smp_invalidate_interrupt won't call leave_mm if cpu0
+ * was in lazy tlb mode.
+ * 1a3) update cpu active_mm
+ * Now cpu0 accepts tlb flushes for the new mm.
+ * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
+ * Now the other cpus will send tlb flush ipis.
+ * 1a4) change cr3.
+ * 1b) thread switch without mm change
+ * cpu active_mm is correct, cpu0 already handles
+ * flush ipis.
+ * 1b1) set cpu mmu_state to TLBSTATE_OK
+ * 1b2) test_and_set the cpu bit in cpu_vm_mask.
+ * Atomically set the bit [other cpus will start sending flush ipis],
+ * and test the bit.
+ * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
+ * 2) switch %%esp, ie current
+ *
+ * The interrupt must handle 2 special cases:
+ * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
+ * - the cpu performs speculative tlb reads, i.e. even if the cpu only
+ * runs in kernel space, the cpu could load tlb entries for user space
+ * pages.
+ *
+ * The good news is that cpu mmu_state is local to each cpu, no
+ * write/read ordering problems.
+ */
+
+/*
+ * TLB flush IPI:
+ *
+ * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
+ * 2) Leave the mm if we are in the lazy tlb mode.
+ *
+ * Interrupts are disabled.
+ */
+
+asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
+{
+ int cpu;
+ int sender;
+ union smp_flush_state *f;
+
+ cpu = smp_processor_id();
+ /*
+ * orig_rax contains the negated interrupt vector.
+ * Use that to determine where the sender put the data.
+ */
+ sender = ~regs->orig_ax - INVALIDATE_TLB_VECTOR_START;
+ f = &per_cpu(flush_state, sender);
+
+ if (!cpu_isset(cpu, f->flush_cpumask))
+ goto out;
+ /*
+ * This was a BUG() but until someone can quote me the
+ * line from the intel manual that guarantees an IPI to
+ * multiple CPUs is retried _only_ on the erroring CPUs
+ * its staying as a return
+ *
+ * BUG();
+ */
+
+ if (f->flush_mm == read_pda(active_mm)) {
+ if (read_pda(mmu_state) == TLBSTATE_OK) {
+ if (f->flush_va == TLB_FLUSH_ALL)
+ local_flush_tlb();
+ else
+ __flush_tlb_one(f->flush_va);
+ } else
+ leave_mm(cpu);
+ }
+out:
+ ack_APIC_irq();
+ cpu_clear(cpu, f->flush_cpumask);
+ add_pda(irq_tlb_count, 1);
+}
+
+void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
+ unsigned long va)
+{
+ int sender;
+ union smp_flush_state *f;
+ cpumask_t cpumask = *cpumaskp;
+
+ /* Caller has disabled preemption */
+ sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
+ f = &per_cpu(flush_state, sender);
+
+ /*
+ * Could avoid this lock when
+ * num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is
+ * probably not worth checking this for a cache-hot lock.
+ */
+ spin_lock(&f->tlbstate_lock);
+
+ f->flush_mm = mm;
+ f->flush_va = va;
+ cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask);
+
+ /*
+ * We have to send the IPI only to
+ * CPUs affected.
+ */
+ send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR_START + sender);
+
+ while (!cpus_empty(f->flush_cpumask))
+ cpu_relax();
+
+ f->flush_mm = NULL;
+ f->flush_va = 0;
+ spin_unlock(&f->tlbstate_lock);
+}
+
+int __cpuinit init_smp_flush(void)
+{
+ int i;
+
+ for_each_cpu_mask(i, cpu_possible_map) {
+ spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock);
+ }
+ return 0;
+}
+core_initcall(init_smp_flush);
+
+void flush_tlb_current_task(void)
+{
+ struct mm_struct *mm = current->mm;
+ cpumask_t cpu_mask;
+
+ preempt_disable();
+ cpu_mask = mm->cpu_vm_mask;
+ cpu_clear(smp_processor_id(), cpu_mask);
+
+ local_flush_tlb();
+ if (!cpus_empty(cpu_mask))
+ flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
+ preempt_enable();
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ cpumask_t cpu_mask;
+
+ preempt_disable();
+ cpu_mask = mm->cpu_vm_mask;
+ cpu_clear(smp_processor_id(), cpu_mask);
+
+ if (current->active_mm == mm) {
+ if (current->mm)
+ local_flush_tlb();
+ else
+ leave_mm(smp_processor_id());
+ }
+ if (!cpus_empty(cpu_mask))
+ flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
+
+ preempt_enable();
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ cpumask_t cpu_mask;
+
+ preempt_disable();
+ cpu_mask = mm->cpu_vm_mask;
+ cpu_clear(smp_processor_id(), cpu_mask);
+
+ if (current->active_mm == mm) {
+ if (current->mm)
+ __flush_tlb_one(va);
+ else
+ leave_mm(smp_processor_id());
+ }
+
+ if (!cpus_empty(cpu_mask))
+ flush_tlb_others(cpu_mask, mm, va);
+
+ preempt_enable();
+}
+
+static void do_flush_tlb_all(void *info)
+{
+ unsigned long cpu = smp_processor_id();
+
+ __flush_tlb_all();
+ if (read_pda(mmu_state) == TLBSTATE_LAZY)
+ leave_mm(cpu);
+}
+
+void flush_tlb_all(void)
+{
+ on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
+}
diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c
index 022bcaa..ab6bf37 100644
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -92,7 +92,7 @@
asmlinkage int sys_set_thread_area(struct user_desc __user *u_info)
{
int ret = do_set_thread_area(current, -1, u_info, 1);
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, u_info);
return ret;
}
@@ -142,7 +142,7 @@
asmlinkage int sys_get_thread_area(struct user_desc __user *u_info)
{
int ret = do_get_thread_area(current, -1, u_info);
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, u_info);
return ret;
}
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
new file mode 100644
index 0000000..abbf199
--- /dev/null
+++ b/arch/x86/kernel/trampoline.c
@@ -0,0 +1,18 @@
+#include <linux/io.h>
+
+#include <asm/trampoline.h>
+
+/* ready for x86_64, no harm for x86, since it will overwrite after alloc */
+unsigned char *trampoline_base = __va(TRAMPOLINE_BASE);
+
+/*
+ * Currently trivial. Write the real->protected mode
+ * bootstrap into the page concerned. The caller
+ * has made sure it's suitably aligned.
+ */
+unsigned long setup_trampoline(void)
+{
+ memcpy(trampoline_base, trampoline_data,
+ trampoline_end - trampoline_data);
+ return virt_to_phys(trampoline_base);
+}
diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
index 4aedd0b..894293c 100644
--- a/arch/x86/kernel/trampoline_64.S
+++ b/arch/x86/kernel/trampoline_64.S
@@ -30,12 +30,7 @@
#include <asm/msr.h>
#include <asm/segment.h>
-/* We can free up trampoline after bootup if cpu hotplug is not supported. */
-#ifndef CONFIG_HOTPLUG_CPU
-.section .init.data, "aw", @progbits
-#else
.section .rodata, "a", @progbits
-#endif
.code16
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index b22c01e..65791ca 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -9,26 +9,28 @@
* 'Traps.c' handles hardware traps and faults after we have saved some
* state in 'asm.s'.
*/
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
#include <linux/interrupt.h>
-#include <linux/highmem.h>
#include <linux/kallsyms.h>
-#include <linux/ptrace.h>
-#include <linux/utsname.h>
+#include <linux/spinlock.h>
+#include <linux/highmem.h>
#include <linux/kprobes.h>
-#include <linux/kexec.h>
-#include <linux/unwind.h>
#include <linux/uaccess.h>
-#include <linux/nmi.h>
+#include <linux/utsname.h>
+#include <linux/kdebug.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/string.h>
+#include <linux/unwind.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kexec.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/init.h>
#include <linux/bug.h>
+#include <linux/nmi.h>
+#include <linux/mm.h>
#ifdef CONFIG_EISA
#include <linux/ioport.h>
@@ -43,21 +45,18 @@
#include <linux/edac.h>
#endif
+#include <asm/arch_hooks.h>
+#include <asm/stacktrace.h>
#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/atomic.h>
#include <asm/debugreg.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/unwind.h>
#include <asm/desc.h>
#include <asm/i387.h>
#include <asm/nmi.h>
-#include <asm/unwind.h>
#include <asm/smp.h>
-#include <asm/arch_hooks.h>
-#include <linux/kdebug.h>
-#include <asm/stacktrace.h>
-
-#include <linux/module.h>
+#include <asm/io.h>
#include "mach_traps.h"
@@ -69,7 +68,7 @@
asmlinkage int system_call(void);
/* Do we ignore FPU interrupts ? */
-char ignore_fpu_irq = 0;
+char ignore_fpu_irq;
/*
* The IDT has to be page-aligned to simplify the Pentium
@@ -105,12 +104,13 @@
void printk_address(unsigned long address, int reliable)
{
#ifdef CONFIG_KALLSYMS
- unsigned long offset = 0, symsize;
+ char namebuf[KSYM_NAME_LEN];
+ unsigned long offset = 0;
+ unsigned long symsize;
const char *symname;
- char *modname;
- char *delim = ":";
- char namebuf[128];
char reliab[4] = "";
+ char *delim = ":";
+ char *modname;
symname = kallsyms_lookup(address, &symsize, &offset,
&modname, namebuf);
@@ -138,13 +138,14 @@
/* The form of the top of the frame on the stack */
struct stack_frame {
- struct stack_frame *next_frame;
- unsigned long return_address;
+ struct stack_frame *next_frame;
+ unsigned long return_address;
};
-static inline unsigned long print_context_stack(struct thread_info *tinfo,
- unsigned long *stack, unsigned long bp,
- const struct stacktrace_ops *ops, void *data)
+static inline unsigned long
+print_context_stack(struct thread_info *tinfo,
+ unsigned long *stack, unsigned long bp,
+ const struct stacktrace_ops *ops, void *data)
{
struct stack_frame *frame = (struct stack_frame *)bp;
@@ -166,7 +167,7 @@
return bp;
}
-#define MSG(msg) ops->warning(data, msg)
+#define MSG(msg) ops->warning(data, msg)
void dump_trace(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, unsigned long bp,
@@ -177,6 +178,7 @@
if (!stack) {
unsigned long dummy;
+
stack = &dummy;
if (task != current)
stack = (unsigned long *)task->thread.sp;
@@ -186,7 +188,7 @@
if (!bp) {
if (task == current) {
/* Grab bp right from our regs */
- asm ("movl %%ebp, %0" : "=r" (bp) : );
+ asm("movl %%ebp, %0" : "=r" (bp) :);
} else {
/* bp is the last reg pushed by switch_to */
bp = *(unsigned long *) task->thread.sp;
@@ -196,15 +198,18 @@
while (1) {
struct thread_info *context;
+
context = (struct thread_info *)
((unsigned long)stack & (~(THREAD_SIZE - 1)));
bp = print_context_stack(context, stack, bp, ops, data);
- /* Should be after the line below, but somewhere
- in early boot context comes out corrupted and we
- can't reference it -AK */
+ /*
+ * Should be after the line below, but somewhere
+ * in early boot context comes out corrupted and we
+ * can't reference it:
+ */
if (ops->stack(data, "IRQ") < 0)
break;
- stack = (unsigned long*)context->previous_esp;
+ stack = (unsigned long *)context->previous_esp;
if (!stack)
break;
touch_nmi_watchdog();
@@ -243,15 +248,15 @@
}
static const struct stacktrace_ops print_trace_ops = {
- .warning = print_trace_warning,
- .warning_symbol = print_trace_warning_symbol,
- .stack = print_trace_stack,
- .address = print_trace_address,
+ .warning = print_trace_warning,
+ .warning_symbol = print_trace_warning_symbol,
+ .stack = print_trace_stack,
+ .address = print_trace_address,
};
static void
show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
- unsigned long *stack, unsigned long bp, char *log_lvl)
+ unsigned long *stack, unsigned long bp, char *log_lvl)
{
dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
printk("%s =======================\n", log_lvl);
@@ -263,21 +268,22 @@
show_trace_log_lvl(task, regs, stack, bp, "");
}
-static void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
- unsigned long *sp, unsigned long bp, char *log_lvl)
+static void
+show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+ unsigned long *sp, unsigned long bp, char *log_lvl)
{
unsigned long *stack;
int i;
if (sp == NULL) {
if (task)
- sp = (unsigned long*)task->thread.sp;
+ sp = (unsigned long *)task->thread.sp;
else
sp = (unsigned long *)&sp;
}
stack = sp;
- for(i = 0; i < kstack_depth_to_print; i++) {
+ for (i = 0; i < kstack_depth_to_print; i++) {
if (kstack_end(stack))
break;
if (i && ((i % 8) == 0))
@@ -285,6 +291,7 @@
printk("%08lx ", *stack++);
}
printk("\n%sCall Trace:\n", log_lvl);
+
show_trace_log_lvl(task, regs, sp, bp, log_lvl);
}
@@ -299,8 +306,8 @@
*/
void dump_stack(void)
{
- unsigned long stack;
unsigned long bp = 0;
+ unsigned long stack;
#ifdef CONFIG_FRAME_POINTER
if (!bp)
@@ -312,6 +319,7 @@
init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
init_utsname()->version);
+
show_trace(current, NULL, &stack, bp);
}
@@ -323,6 +331,7 @@
print_modules();
__show_registers(regs, 0);
+
printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)",
TASK_COMM_LEN, current->comm, task_pid_nr(current),
current_thread_info(), current, task_thread_info(current));
@@ -331,10 +340,10 @@
* time of the fault..
*/
if (!user_mode_vm(regs)) {
- u8 *ip;
unsigned int code_prologue = code_bytes * 43 / 64;
unsigned int code_len = code_bytes;
unsigned char c;
+ u8 *ip;
printk("\n" KERN_EMERG "Stack: ");
show_stack_log_lvl(NULL, regs, ®s->sp, 0, KERN_EMERG);
@@ -361,7 +370,7 @@
}
}
printk("\n");
-}
+}
int is_valid_bugaddr(unsigned long ip)
{
@@ -377,10 +386,10 @@
static int die_counter;
-int __kprobes __die(const char * str, struct pt_regs * regs, long err)
+int __kprobes __die(const char *str, struct pt_regs *regs, long err)
{
- unsigned long sp;
unsigned short ss;
+ unsigned long sp;
printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
#ifdef CONFIG_PREEMPT
@@ -395,8 +404,8 @@
printk("\n");
if (notify_die(DIE_OOPS, str, regs, err,
- current->thread.trap_no, SIGSEGV) !=
- NOTIFY_STOP) {
+ current->thread.trap_no, SIGSEGV) != NOTIFY_STOP) {
+
show_registers(regs);
/* Executive summary in case the oops scrolled away */
sp = (unsigned long) (®s->sp);
@@ -408,17 +417,18 @@
printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip);
print_symbol("%s", regs->ip);
printk(" SS:ESP %04x:%08lx\n", ss, sp);
+
return 0;
- } else {
- return 1;
}
+
+ return 1;
}
/*
- * This is gone through when something in the kernel has done something bad and
- * is about to be terminated.
+ * This is gone through when something in the kernel has done something bad
+ * and is about to be terminated:
*/
-void die(const char * str, struct pt_regs * regs, long err)
+void die(const char *str, struct pt_regs *regs, long err)
{
static struct {
raw_spinlock_t lock;
@@ -440,8 +450,9 @@
die.lock_owner = smp_processor_id();
die.lock_owner_depth = 0;
bust_spinlocks(1);
- } else
+ } else {
raw_local_irq_save(flags);
+ }
if (++die.lock_owner_depth < 3) {
report_bug(regs->ip, regs);
@@ -474,19 +485,20 @@
do_exit(SIGSEGV);
}
-static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err)
+static inline void
+die_if_kernel(const char *str, struct pt_regs *regs, long err)
{
if (!user_mode_vm(regs))
die(str, regs, err);
}
-static void __kprobes do_trap(int trapnr, int signr, char *str, int vm86,
- struct pt_regs * regs, long error_code,
- siginfo_t *info)
+static void __kprobes
+do_trap(int trapnr, int signr, char *str, int vm86, struct pt_regs *regs,
+ long error_code, siginfo_t *info)
{
struct task_struct *tsk = current;
- if (regs->flags & VM_MASK) {
+ if (regs->flags & X86_VM_MASK) {
if (vm86)
goto vm86_trap;
goto trap_signal;
@@ -495,111 +507,112 @@
if (!user_mode(regs))
goto kernel_trap;
- trap_signal: {
- /*
- * We want error_code and trap_no set for userspace faults and
- * kernelspace faults which result in die(), but not
- * kernelspace faults which are fixed up. die() gives the
- * process no chance to handle the signal and notice the
- * kernel fault information, so that won't result in polluting
- * the information about previously queued, but not yet
- * delivered, faults. See also do_general_protection below.
- */
+trap_signal:
+ /*
+ * We want error_code and trap_no set for userspace faults and
+ * kernelspace faults which result in die(), but not
+ * kernelspace faults which are fixed up. die() gives the
+ * process no chance to handle the signal and notice the
+ * kernel fault information, so that won't result in polluting
+ * the information about previously queued, but not yet
+ * delivered, faults. See also do_general_protection below.
+ */
+ tsk->thread.error_code = error_code;
+ tsk->thread.trap_no = trapnr;
+
+ if (info)
+ force_sig_info(signr, info, tsk);
+ else
+ force_sig(signr, tsk);
+ return;
+
+kernel_trap:
+ if (!fixup_exception(regs)) {
tsk->thread.error_code = error_code;
tsk->thread.trap_no = trapnr;
-
- if (info)
- force_sig_info(signr, info, tsk);
- else
- force_sig(signr, tsk);
- return;
+ die(str, regs, error_code);
}
+ return;
- kernel_trap: {
- if (!fixup_exception(regs)) {
- tsk->thread.error_code = error_code;
- tsk->thread.trap_no = trapnr;
- die(str, regs, error_code);
- }
- return;
- }
-
- vm86_trap: {
- int ret = handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, trapnr);
- if (ret) goto trap_signal;
- return;
- }
+vm86_trap:
+ if (handle_vm86_trap((struct kernel_vm86_regs *) regs,
+ error_code, trapnr))
+ goto trap_signal;
+ return;
}
-#define DO_ERROR(trapnr, signr, str, name) \
-void do_##name(struct pt_regs * regs, long error_code) \
-{ \
- if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
- == NOTIFY_STOP) \
- return; \
- do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \
+#define DO_ERROR(trapnr, signr, str, name) \
+void do_##name(struct pt_regs *regs, long error_code) \
+{ \
+ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+ == NOTIFY_STOP) \
+ return; \
+ do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \
}
-#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr, irq) \
-void do_##name(struct pt_regs * regs, long error_code) \
-{ \
- siginfo_t info; \
- if (irq) \
- local_irq_enable(); \
- info.si_signo = signr; \
- info.si_errno = 0; \
- info.si_code = sicode; \
- info.si_addr = (void __user *)siaddr; \
- if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
- == NOTIFY_STOP) \
- return; \
- do_trap(trapnr, signr, str, 0, regs, error_code, &info); \
+#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr, irq) \
+void do_##name(struct pt_regs *regs, long error_code) \
+{ \
+ siginfo_t info; \
+ if (irq) \
+ local_irq_enable(); \
+ info.si_signo = signr; \
+ info.si_errno = 0; \
+ info.si_code = sicode; \
+ info.si_addr = (void __user *)siaddr; \
+ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+ == NOTIFY_STOP) \
+ return; \
+ do_trap(trapnr, signr, str, 0, regs, error_code, &info); \
}
-#define DO_VM86_ERROR(trapnr, signr, str, name) \
-void do_##name(struct pt_regs * regs, long error_code) \
-{ \
- if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
- == NOTIFY_STOP) \
- return; \
- do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \
+#define DO_VM86_ERROR(trapnr, signr, str, name) \
+void do_##name(struct pt_regs *regs, long error_code) \
+{ \
+ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+ == NOTIFY_STOP) \
+ return; \
+ do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \
}
-#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
-void do_##name(struct pt_regs * regs, long error_code) \
-{ \
- siginfo_t info; \
- info.si_signo = signr; \
- info.si_errno = 0; \
- info.si_code = sicode; \
- info.si_addr = (void __user *)siaddr; \
- trace_hardirqs_fixup(); \
- if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
- == NOTIFY_STOP) \
- return; \
- do_trap(trapnr, signr, str, 1, regs, error_code, &info); \
+#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
+void do_##name(struct pt_regs *regs, long error_code) \
+{ \
+ siginfo_t info; \
+ info.si_signo = signr; \
+ info.si_errno = 0; \
+ info.si_code = sicode; \
+ info.si_addr = (void __user *)siaddr; \
+ trace_hardirqs_fixup(); \
+ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
+ == NOTIFY_STOP) \
+ return; \
+ do_trap(trapnr, signr, str, 1, regs, error_code, &info); \
}
-DO_VM86_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
+DO_VM86_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
#ifndef CONFIG_KPROBES
-DO_VM86_ERROR( 3, SIGTRAP, "int3", int3)
+DO_VM86_ERROR(3, SIGTRAP, "int3", int3)
#endif
-DO_VM86_ERROR( 4, SIGSEGV, "overflow", overflow)
-DO_VM86_ERROR( 5, SIGSEGV, "bounds", bounds)
-DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0)
-DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
+DO_VM86_ERROR(4, SIGSEGV, "overflow", overflow)
+DO_VM86_ERROR(5, SIGSEGV, "bounds", bounds)
+DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0)
+DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0, 0)
DO_ERROR_INFO(32, SIGSEGV, "iret exception", iret_error, ILL_BADSTK, 0, 1)
-void __kprobes do_general_protection(struct pt_regs * regs,
- long error_code)
+void __kprobes do_general_protection(struct pt_regs *regs, long error_code)
{
- int cpu = get_cpu();
- struct tss_struct *tss = &per_cpu(init_tss, cpu);
- struct thread_struct *thread = ¤t->thread;
+ struct thread_struct *thread;
+ struct tss_struct *tss;
+ int cpu;
+
+ cpu = get_cpu();
+ tss = &per_cpu(init_tss, cpu);
+ thread = ¤t->thread;
/*
* Perform the lazy TSS's I/O bitmap copy. If the TSS has an
@@ -616,19 +629,21 @@
* If the previously set map was extending to higher ports
* than the current one, pad extra space with 0xff (no access).
*/
- if (thread->io_bitmap_max < tss->io_bitmap_max)
+ if (thread->io_bitmap_max < tss->io_bitmap_max) {
memset((char *) tss->io_bitmap +
thread->io_bitmap_max, 0xff,
tss->io_bitmap_max - thread->io_bitmap_max);
+ }
tss->io_bitmap_max = thread->io_bitmap_max;
tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
tss->io_bitmap_owner = thread;
put_cpu();
+
return;
}
put_cpu();
- if (regs->flags & VM_MASK)
+ if (regs->flags & X86_VM_MASK)
goto gp_in_vm86;
if (!user_mode(regs))
@@ -636,6 +651,7 @@
current->thread.error_code = error_code;
current->thread.trap_no = 13;
+
if (show_unhandled_signals && unhandled_signal(current, SIGSEGV) &&
printk_ratelimit()) {
printk(KERN_INFO
@@ -666,21 +682,24 @@
}
static __kprobes void
-mem_parity_error(unsigned char reason, struct pt_regs * regs)
+mem_parity_error(unsigned char reason, struct pt_regs *regs)
{
- printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on "
- "CPU %d.\n", reason, smp_processor_id());
- printk(KERN_EMERG "You have some hardware problem, likely on the PCI bus.\n");
+ printk(KERN_EMERG
+ "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
+ reason, smp_processor_id());
+
+ printk(KERN_EMERG
+ "You have some hardware problem, likely on the PCI bus.\n");
#if defined(CONFIG_EDAC)
- if(edac_handler_set()) {
+ if (edac_handler_set()) {
edac_atomic_assert_error();
return;
}
#endif
if (panic_on_unrecovered_nmi)
- panic("NMI: Not continuing");
+ panic("NMI: Not continuing");
printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
@@ -689,7 +708,7 @@
}
static __kprobes void
-io_check_error(unsigned char reason, struct pt_regs * regs)
+io_check_error(unsigned char reason, struct pt_regs *regs)
{
unsigned long i;
@@ -699,28 +718,37 @@
/* Re-enable the IOCK line, wait for a few seconds */
reason = (reason & 0xf) | 8;
outb(reason, 0x61);
+
i = 2000;
- while (--i) udelay(1000);
+ while (--i)
+ udelay(1000);
+
reason &= ~8;
outb(reason, 0x61);
}
static __kprobes void
-unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
+unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
{
+ if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
+ return;
#ifdef CONFIG_MCA
- /* Might actually be able to figure out what the guilty party
- * is. */
- if( MCA_bus ) {
+ /*
+ * Might actually be able to figure out what the guilty party
+ * is:
+ */
+ if (MCA_bus) {
mca_handle_nmi();
return;
}
#endif
- printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on "
- "CPU %d.\n", reason, smp_processor_id());
+ printk(KERN_EMERG
+ "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
+ reason, smp_processor_id());
+
printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
if (panic_on_unrecovered_nmi)
- panic("NMI: Not continuing");
+ panic("NMI: Not continuing");
printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
}
@@ -729,14 +757,13 @@
void __kprobes die_nmi(struct pt_regs *regs, const char *msg)
{
- if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) ==
- NOTIFY_STOP)
+ if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP)
return;
spin_lock(&nmi_print_lock);
/*
* We are in trouble anyway, lets at least try
- * to get a message out.
+ * to get a message out:
*/
bust_spinlocks(1);
printk(KERN_EMERG "%s", msg);
@@ -747,9 +774,10 @@
spin_unlock(&nmi_print_lock);
bust_spinlocks(0);
- /* If we are in kernel we are probably nested up pretty bad
- * and might aswell get out now while we still can.
- */
+ /*
+ * If we are in kernel we are probably nested up pretty bad
+ * and might aswell get out now while we still can:
+ */
if (!user_mode_vm(regs)) {
current->thread.trap_no = 2;
crash_kexec(regs);
@@ -758,14 +786,14 @@
do_exit(SIGSEGV);
}
-static __kprobes void default_do_nmi(struct pt_regs * regs)
+static __kprobes void default_do_nmi(struct pt_regs *regs)
{
unsigned char reason = 0;
- /* Only the BSP gets external NMIs from the system. */
+ /* Only the BSP gets external NMIs from the system: */
if (!smp_processor_id())
reason = get_nmi_reason();
-
+
if (!(reason & 0xc0)) {
if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
== NOTIFY_STOP)
@@ -778,8 +806,10 @@
if (nmi_watchdog_tick(regs, reason))
return;
if (!do_nmi_callback(regs, smp_processor_id()))
-#endif
unknown_nmi_error(reason, regs);
+#else
+ unknown_nmi_error(reason, regs);
+#endif
return;
}
@@ -791,14 +821,14 @@
io_check_error(reason, regs);
/*
* Reassert NMI in case it became active meanwhile
- * as it's edge-triggered.
+ * as it's edge-triggered:
*/
reassert_nmi();
}
static int ignore_nmis;
-__kprobes void do_nmi(struct pt_regs * regs, long error_code)
+__kprobes void do_nmi(struct pt_regs *regs, long error_code)
{
int cpu;
@@ -834,9 +864,12 @@
if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
== NOTIFY_STOP)
return;
- /* This is an interrupt gate, because kprobes wants interrupts
- disabled. Normal trap handlers don't. */
+ /*
+ * This is an interrupt gate, because kprobes wants interrupts
+ * disabled. Normal trap handlers don't.
+ */
restore_interrupts(regs);
+
do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL);
}
#endif
@@ -851,7 +884,7 @@
* from user space. Such code must not hold kernel locks (since it
* can equally take a page fault), therefore it is safe to call
* force_sig_info even though that claims and releases locks.
- *
+ *
* Code in ./signal.c ensures that the debug control register
* is restored before we deliver any signal, and therefore that
* user code runs with the correct debug control register even though
@@ -863,10 +896,10 @@
* find every occurrence of the TF bit that could be saved away even
* by user code)
*/
-void __kprobes do_debug(struct pt_regs * regs, long error_code)
+void __kprobes do_debug(struct pt_regs *regs, long error_code)
{
- unsigned int condition;
struct task_struct *tsk = current;
+ unsigned int condition;
trace_hardirqs_fixup();
@@ -891,7 +924,7 @@
goto clear_dr7;
}
- if (regs->flags & VM_MASK)
+ if (regs->flags & X86_VM_MASK)
goto debug_vm86;
/* Save debug status register where ptrace can see it */
@@ -914,7 +947,8 @@
/* Ok, finally something we can handle */
send_sigtrap(tsk, regs, error_code);
- /* Disable additional traps. They'll be re-enabled when
+ /*
+ * Disable additional traps. They'll be re-enabled when
* the signal is delivered.
*/
clear_dr7:
@@ -927,7 +961,7 @@
clear_TF_reenable:
set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
- regs->flags &= ~TF_MASK;
+ regs->flags &= ~X86_EFLAGS_TF;
return;
}
@@ -938,9 +972,10 @@
*/
void math_error(void __user *ip)
{
- struct task_struct * task;
+ struct task_struct *task;
+ unsigned short cwd;
+ unsigned short swd;
siginfo_t info;
- unsigned short cwd, swd;
/*
* Save the info for the exception handler and clear the error.
@@ -966,36 +1001,36 @@
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
switch (swd & ~cwd & 0x3f) {
- case 0x000: /* No unmasked exception */
- return;
- default: /* Multiple exceptions */
- break;
- case 0x001: /* Invalid Op */
- /*
- * swd & 0x240 == 0x040: Stack Underflow
- * swd & 0x240 == 0x240: Stack Overflow
- * User must clear the SF bit (0x40) if set
- */
- info.si_code = FPE_FLTINV;
- break;
- case 0x002: /* Denormalize */
- case 0x010: /* Underflow */
- info.si_code = FPE_FLTUND;
- break;
- case 0x004: /* Zero Divide */
- info.si_code = FPE_FLTDIV;
- break;
- case 0x008: /* Overflow */
- info.si_code = FPE_FLTOVF;
- break;
- case 0x020: /* Precision */
- info.si_code = FPE_FLTRES;
- break;
+ case 0x000: /* No unmasked exception */
+ return;
+ default: /* Multiple exceptions */
+ break;
+ case 0x001: /* Invalid Op */
+ /*
+ * swd & 0x240 == 0x040: Stack Underflow
+ * swd & 0x240 == 0x240: Stack Overflow
+ * User must clear the SF bit (0x40) if set
+ */
+ info.si_code = FPE_FLTINV;
+ break;
+ case 0x002: /* Denormalize */
+ case 0x010: /* Underflow */
+ info.si_code = FPE_FLTUND;
+ break;
+ case 0x004: /* Zero Divide */
+ info.si_code = FPE_FLTDIV;
+ break;
+ case 0x008: /* Overflow */
+ info.si_code = FPE_FLTOVF;
+ break;
+ case 0x020: /* Precision */
+ info.si_code = FPE_FLTRES;
+ break;
}
force_sig_info(SIGFPE, &info, task);
}
-void do_coprocessor_error(struct pt_regs * regs, long error_code)
+void do_coprocessor_error(struct pt_regs *regs, long error_code)
{
ignore_fpu_irq = 1;
math_error((void __user *)regs->ip);
@@ -1003,9 +1038,9 @@
static void simd_math_error(void __user *ip)
{
- struct task_struct * task;
- siginfo_t info;
+ struct task_struct *task;
unsigned short mxcsr;
+ siginfo_t info;
/*
* Save the info for the exception handler and clear the error.
@@ -1026,82 +1061,80 @@
*/
mxcsr = get_fpu_mxcsr(task);
switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
- case 0x000:
- default:
- break;
- case 0x001: /* Invalid Op */
- info.si_code = FPE_FLTINV;
- break;
- case 0x002: /* Denormalize */
- case 0x010: /* Underflow */
- info.si_code = FPE_FLTUND;
- break;
- case 0x004: /* Zero Divide */
- info.si_code = FPE_FLTDIV;
- break;
- case 0x008: /* Overflow */
- info.si_code = FPE_FLTOVF;
- break;
- case 0x020: /* Precision */
- info.si_code = FPE_FLTRES;
- break;
+ case 0x000:
+ default:
+ break;
+ case 0x001: /* Invalid Op */
+ info.si_code = FPE_FLTINV;
+ break;
+ case 0x002: /* Denormalize */
+ case 0x010: /* Underflow */
+ info.si_code = FPE_FLTUND;
+ break;
+ case 0x004: /* Zero Divide */
+ info.si_code = FPE_FLTDIV;
+ break;
+ case 0x008: /* Overflow */
+ info.si_code = FPE_FLTOVF;
+ break;
+ case 0x020: /* Precision */
+ info.si_code = FPE_FLTRES;
+ break;
}
force_sig_info(SIGFPE, &info, task);
}
-void do_simd_coprocessor_error(struct pt_regs * regs,
- long error_code)
+void do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
{
if (cpu_has_xmm) {
/* Handle SIMD FPU exceptions on PIII+ processors. */
ignore_fpu_irq = 1;
simd_math_error((void __user *)regs->ip);
- } else {
- /*
- * Handle strange cache flush from user space exception
- * in all other cases. This is undocumented behaviour.
- */
- if (regs->flags & VM_MASK) {
- handle_vm86_fault((struct kernel_vm86_regs *)regs,
- error_code);
- return;
- }
- current->thread.trap_no = 19;
- current->thread.error_code = error_code;
- die_if_kernel("cache flush denied", regs, error_code);
- force_sig(SIGSEGV, current);
+ return;
}
+ /*
+ * Handle strange cache flush from user space exception
+ * in all other cases. This is undocumented behaviour.
+ */
+ if (regs->flags & X86_VM_MASK) {
+ handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code);
+ return;
+ }
+ current->thread.trap_no = 19;
+ current->thread.error_code = error_code;
+ die_if_kernel("cache flush denied", regs, error_code);
+ force_sig(SIGSEGV, current);
}
-void do_spurious_interrupt_bug(struct pt_regs * regs,
- long error_code)
+void do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
{
#if 0
/* No need to warn about this any longer. */
- printk("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
+ printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
#endif
}
-unsigned long patch_espfix_desc(unsigned long uesp,
- unsigned long kesp)
+unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
{
struct desc_struct *gdt = __get_cpu_var(gdt_page).gdt;
unsigned long base = (kesp - uesp) & -THREAD_SIZE;
unsigned long new_kesp = kesp - base;
unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
__u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS];
+
/* Set up base for espfix segment */
- desc &= 0x00f0ff0000000000ULL;
- desc |= ((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
+ desc &= 0x00f0ff0000000000ULL;
+ desc |= ((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
((((__u64)base) << 32) & 0xff00000000000000ULL) |
((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) |
(lim_pages & 0xffff);
*(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc;
+
return new_kesp;
}
/*
- * 'math_state_restore()' saves the current math information in the
+ * 'math_state_restore()' saves the current math information in the
* old math state array, and gets the new ones from the current task
*
* Careful.. There are problems with IBM-designed IRQ13 behaviour.
@@ -1115,7 +1148,7 @@
struct thread_info *thread = current_thread_info();
struct task_struct *tsk = thread->task;
- clts(); /* Allow maths ops (or we recurse) */
+ clts(); /* Allow maths ops (or we recurse) */
if (!tsk_used_math(tsk))
init_fpu(tsk);
restore_fpu(tsk);
@@ -1128,53 +1161,52 @@
asmlinkage void math_emulate(long arg)
{
- printk(KERN_EMERG "math-emulation not enabled and no coprocessor found.\n");
- printk(KERN_EMERG "killing %s.\n",current->comm);
- force_sig(SIGFPE,current);
+ printk(KERN_EMERG
+ "math-emulation not enabled and no coprocessor found.\n");
+ printk(KERN_EMERG "killing %s.\n", current->comm);
+ force_sig(SIGFPE, current);
schedule();
}
#endif /* CONFIG_MATH_EMULATION */
-
void __init trap_init(void)
{
int i;
#ifdef CONFIG_EISA
void __iomem *p = early_ioremap(0x0FFFD9, 4);
- if (readl(p) == 'E'+('I'<<8)+('S'<<16)+('A'<<24)) {
+
+ if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
EISA_bus = 1;
- }
early_iounmap(p, 4);
#endif
#ifdef CONFIG_X86_LOCAL_APIC
init_apic_mappings();
#endif
-
- set_trap_gate(0,÷_error);
- set_intr_gate(1,&debug);
- set_intr_gate(2,&nmi);
+ set_trap_gate(0, ÷_error);
+ set_intr_gate(1, &debug);
+ set_intr_gate(2, &nmi);
set_system_intr_gate(3, &int3); /* int3/4 can be called from all */
- set_system_gate(4,&overflow);
- set_trap_gate(5,&bounds);
- set_trap_gate(6,&invalid_op);
- set_trap_gate(7,&device_not_available);
- set_task_gate(8,GDT_ENTRY_DOUBLEFAULT_TSS);
- set_trap_gate(9,&coprocessor_segment_overrun);
- set_trap_gate(10,&invalid_TSS);
- set_trap_gate(11,&segment_not_present);
- set_trap_gate(12,&stack_segment);
- set_trap_gate(13,&general_protection);
- set_intr_gate(14,&page_fault);
- set_trap_gate(15,&spurious_interrupt_bug);
- set_trap_gate(16,&coprocessor_error);
- set_trap_gate(17,&alignment_check);
+ set_system_gate(4, &overflow);
+ set_trap_gate(5, &bounds);
+ set_trap_gate(6, &invalid_op);
+ set_trap_gate(7, &device_not_available);
+ set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
+ set_trap_gate(9, &coprocessor_segment_overrun);
+ set_trap_gate(10, &invalid_TSS);
+ set_trap_gate(11, &segment_not_present);
+ set_trap_gate(12, &stack_segment);
+ set_trap_gate(13, &general_protection);
+ set_intr_gate(14, &page_fault);
+ set_trap_gate(15, &spurious_interrupt_bug);
+ set_trap_gate(16, &coprocessor_error);
+ set_trap_gate(17, &alignment_check);
#ifdef CONFIG_X86_MCE
- set_trap_gate(18,&machine_check);
+ set_trap_gate(18, &machine_check);
#endif
- set_trap_gate(19,&simd_coprocessor_error);
+ set_trap_gate(19, &simd_coprocessor_error);
/*
* Verify that the FXSAVE/FXRSTOR data will be 16-byte aligned.
@@ -1187,21 +1219,22 @@
printk("done.\n");
}
if (cpu_has_xmm) {
- printk(KERN_INFO "Enabling unmasked SIMD FPU exception "
- "support... ");
+ printk(KERN_INFO
+ "Enabling unmasked SIMD FPU exception support... ");
set_in_cr4(X86_CR4_OSXMMEXCPT);
printk("done.\n");
}
- set_system_gate(SYSCALL_VECTOR,&system_call);
+ set_system_gate(SYSCALL_VECTOR, &system_call);
- /* Reserve all the builtin and the syscall vector. */
+ /* Reserve all the builtin and the syscall vector: */
for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
set_bit(i, used_vectors);
+
set_bit(SYSCALL_VECTOR, used_vectors);
/*
- * Should be a barrier for any external CPU state.
+ * Should be a barrier for any external CPU state:
*/
cpu_init();
@@ -1211,6 +1244,7 @@
static int __init kstack_setup(char *s)
{
kstack_depth_to_print = simple_strtoul(s, NULL, 0);
+
return 1;
}
__setup("kstack=", kstack_setup);
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index 0454666..79aa6fc 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -33,6 +33,8 @@
#include <linux/kdebug.h>
#include <linux/utsname.h>
+#include <mach_traps.h>
+
#if defined(CONFIG_EDAC)
#include <linux/edac.h>
#endif
@@ -600,8 +602,13 @@
void __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic)
{
- unsigned long flags = oops_begin();
+ unsigned long flags;
+ if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) ==
+ NOTIFY_STOP)
+ return;
+
+ flags = oops_begin();
/*
* We are in trouble anyway, lets at least try
* to get a message out.
@@ -806,6 +813,8 @@
static __kprobes void
unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
{
+ if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
+ return;
printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
reason);
printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index f14cfd9..3d7e6e9 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -84,8 +84,8 @@
static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
{
- unsigned long flags, prev_scale, *scale;
unsigned long long tsc_now, ns_now;
+ unsigned long flags, *scale;
local_irq_save(flags);
sched_clock_idle_sleep_event();
@@ -95,7 +95,6 @@
rdtscll(tsc_now);
ns_now = __cycles_2_ns(tsc_now);
- prev_scale = *scale;
if (cpu_khz)
*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
@@ -256,9 +255,7 @@
ref_freq, freq->new);
if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
tsc_khz = cpu_khz;
- preempt_disable();
- set_cyc2ns_scale(cpu_khz, smp_processor_id());
- preempt_enable();
+ set_cyc2ns_scale(cpu_khz, freq->cpu);
/*
* TSC based sched_clock turns
* to junk w/ cpufreq
@@ -394,13 +391,15 @@
int cpu;
if (!cpu_has_tsc)
- goto out_no_tsc;
+ return;
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
- if (!cpu_khz)
- goto out_no_tsc;
+ if (!cpu_khz) {
+ mark_tsc_unstable("could not calculate TSC khz");
+ return;
+ }
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
@@ -433,9 +432,4 @@
tsc_enabled = 1;
clocksource_register(&clocksource_tsc);
-
- return;
-
-out_no_tsc:
- setup_clear_cpu_cap(X86_FEATURE_TSC);
}
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
index 947554d..ceeba01 100644
--- a/arch/x86/kernel/tsc_64.c
+++ b/arch/x86/kernel/tsc_64.c
@@ -44,8 +44,8 @@
static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
{
- unsigned long flags, prev_scale, *scale;
unsigned long long tsc_now, ns_now;
+ unsigned long flags, *scale;
local_irq_save(flags);
sched_clock_idle_sleep_event();
@@ -55,7 +55,6 @@
rdtscll(tsc_now);
ns_now = __cycles_2_ns(tsc_now);
- prev_scale = *scale;
if (cpu_khz)
*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
@@ -148,9 +147,7 @@
mark_tsc_unstable("cpufreq changes");
}
- preempt_disable();
- set_cyc2ns_scale(tsc_khz_ref, smp_processor_id());
- preempt_enable();
+ set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
return 0;
}
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 738c210..38f566f 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -64,7 +64,7 @@
#define KVM86 ((struct kernel_vm86_struct *)regs)
-#define VMPI KVM86->vm86plus
+#define VMPI KVM86->vm86plus
/*
@@ -81,7 +81,7 @@
#define VFLAGS (*(unsigned short *)&(current->thread.v86flags))
#define VEFLAGS (current->thread.v86flags)
-#define set_flags(X,new,mask) \
+#define set_flags(X, new, mask) \
((X) = ((X) & ~(mask)) | ((new) & (mask)))
#define SAFE_MASK (0xDD5)
@@ -93,8 +93,10 @@
{
int ret = 0;
- /* kernel_vm86_regs is missing gs, so copy everything up to
- (but not including) orig_eax, and then rest including orig_eax. */
+ /*
+ * kernel_vm86_regs is missing gs, so copy everything up to
+ * (but not including) orig_eax, and then rest including orig_eax.
+ */
ret += copy_to_user(user, regs, offsetof(struct kernel_vm86_regs, pt.orig_ax));
ret += copy_to_user(&user->orig_eax, ®s->pt.orig_ax,
sizeof(struct kernel_vm86_regs) -
@@ -120,7 +122,7 @@
return ret;
}
-struct pt_regs * save_v86_state(struct kernel_vm86_regs * regs)
+struct pt_regs *save_v86_state(struct kernel_vm86_regs *regs)
{
struct tss_struct *tss;
struct pt_regs *ret;
@@ -137,9 +139,9 @@
printk("no vm86_info: BAD\n");
do_exit(SIGSEGV);
}
- set_flags(regs->pt.flags, VEFLAGS, VIF_MASK | current->thread.v86mask);
- tmp = copy_vm86_regs_to_user(¤t->thread.vm86_info->regs,regs);
- tmp += put_user(current->thread.screen_bitmap,¤t->thread.vm86_info->screen_bitmap);
+ set_flags(regs->pt.flags, VEFLAGS, X86_EFLAGS_VIF | current->thread.v86mask);
+ tmp = copy_vm86_regs_to_user(¤t->thread.vm86_info->regs, regs);
+ tmp += put_user(current->thread.screen_bitmap, ¤t->thread.vm86_info->screen_bitmap);
if (tmp) {
printk("vm86: could not access userspace vm86_info\n");
do_exit(SIGSEGV);
@@ -237,20 +239,21 @@
tsk = current;
switch (regs.bx) {
- case VM86_REQUEST_IRQ:
- case VM86_FREE_IRQ:
- case VM86_GET_IRQ_BITS:
- case VM86_GET_AND_RESET_IRQ:
- ret = do_vm86_irq_handling(regs.bx, (int)regs.cx);
- goto out;
- case VM86_PLUS_INSTALL_CHECK:
- /* NOTE: on old vm86 stuff this will return the error
- from access_ok(), because the subfunction is
- interpreted as (invalid) address to vm86_struct.
- So the installation check works.
- */
- ret = 0;
- goto out;
+ case VM86_REQUEST_IRQ:
+ case VM86_FREE_IRQ:
+ case VM86_GET_IRQ_BITS:
+ case VM86_GET_AND_RESET_IRQ:
+ ret = do_vm86_irq_handling(regs.bx, (int)regs.cx);
+ goto out;
+ case VM86_PLUS_INSTALL_CHECK:
+ /*
+ * NOTE: on old vm86 stuff this will return the error
+ * from access_ok(), because the subfunction is
+ * interpreted as (invalid) address to vm86_struct.
+ * So the installation check works.
+ */
+ ret = 0;
+ goto out;
}
/* we come here only for functions VM86_ENTER, VM86_ENTER_NO_BYPASS */
@@ -296,21 +299,21 @@
VEFLAGS = info->regs.pt.flags;
info->regs.pt.flags &= SAFE_MASK;
info->regs.pt.flags |= info->regs32->flags & ~SAFE_MASK;
- info->regs.pt.flags |= VM_MASK;
+ info->regs.pt.flags |= X86_VM_MASK;
switch (info->cpu_type) {
- case CPU_286:
- tsk->thread.v86mask = 0;
- break;
- case CPU_386:
- tsk->thread.v86mask = NT_MASK | IOPL_MASK;
- break;
- case CPU_486:
- tsk->thread.v86mask = AC_MASK | NT_MASK | IOPL_MASK;
- break;
- default:
- tsk->thread.v86mask = ID_MASK | AC_MASK | NT_MASK | IOPL_MASK;
- break;
+ case CPU_286:
+ tsk->thread.v86mask = 0;
+ break;
+ case CPU_386:
+ tsk->thread.v86mask = X86_EFLAGS_NT | X86_EFLAGS_IOPL;
+ break;
+ case CPU_486:
+ tsk->thread.v86mask = X86_EFLAGS_AC | X86_EFLAGS_NT | X86_EFLAGS_IOPL;
+ break;
+ default:
+ tsk->thread.v86mask = X86_EFLAGS_ID | X86_EFLAGS_AC | X86_EFLAGS_NT | X86_EFLAGS_IOPL;
+ break;
}
/*
@@ -346,9 +349,9 @@
/* we never return here */
}
-static inline void return_to_32bit(struct kernel_vm86_regs * regs16, int retval)
+static inline void return_to_32bit(struct kernel_vm86_regs *regs16, int retval)
{
- struct pt_regs * regs32;
+ struct pt_regs *regs32;
regs32 = save_v86_state(regs16);
regs32->ax = retval;
@@ -358,29 +361,30 @@
: : "r" (regs32), "r" (current_thread_info()));
}
-static inline void set_IF(struct kernel_vm86_regs * regs)
+static inline void set_IF(struct kernel_vm86_regs *regs)
{
- VEFLAGS |= VIF_MASK;
- if (VEFLAGS & VIP_MASK)
+ VEFLAGS |= X86_EFLAGS_VIF;
+ if (VEFLAGS & X86_EFLAGS_VIP)
return_to_32bit(regs, VM86_STI);
}
-static inline void clear_IF(struct kernel_vm86_regs * regs)
+static inline void clear_IF(struct kernel_vm86_regs *regs)
{
- VEFLAGS &= ~VIF_MASK;
+ VEFLAGS &= ~X86_EFLAGS_VIF;
}
-static inline void clear_TF(struct kernel_vm86_regs * regs)
+static inline void clear_TF(struct kernel_vm86_regs *regs)
{
- regs->pt.flags &= ~TF_MASK;
+ regs->pt.flags &= ~X86_EFLAGS_TF;
}
-static inline void clear_AC(struct kernel_vm86_regs * regs)
+static inline void clear_AC(struct kernel_vm86_regs *regs)
{
- regs->pt.flags &= ~AC_MASK;
+ regs->pt.flags &= ~X86_EFLAGS_AC;
}
-/* It is correct to call set_IF(regs) from the set_vflags_*
+/*
+ * It is correct to call set_IF(regs) from the set_vflags_*
* functions. However someone forgot to call clear_IF(regs)
* in the opposite case.
* After the command sequence CLI PUSHF STI POPF you should
@@ -391,41 +395,41 @@
* [KD]
*/
-static inline void set_vflags_long(unsigned long flags, struct kernel_vm86_regs * regs)
+static inline void set_vflags_long(unsigned long flags, struct kernel_vm86_regs *regs)
{
set_flags(VEFLAGS, flags, current->thread.v86mask);
set_flags(regs->pt.flags, flags, SAFE_MASK);
- if (flags & IF_MASK)
+ if (flags & X86_EFLAGS_IF)
set_IF(regs);
else
clear_IF(regs);
}
-static inline void set_vflags_short(unsigned short flags, struct kernel_vm86_regs * regs)
+static inline void set_vflags_short(unsigned short flags, struct kernel_vm86_regs *regs)
{
set_flags(VFLAGS, flags, current->thread.v86mask);
set_flags(regs->pt.flags, flags, SAFE_MASK);
- if (flags & IF_MASK)
+ if (flags & X86_EFLAGS_IF)
set_IF(regs);
else
clear_IF(regs);
}
-static inline unsigned long get_vflags(struct kernel_vm86_regs * regs)
+static inline unsigned long get_vflags(struct kernel_vm86_regs *regs)
{
unsigned long flags = regs->pt.flags & RETURN_MASK;
- if (VEFLAGS & VIF_MASK)
- flags |= IF_MASK;
- flags |= IOPL_MASK;
+ if (VEFLAGS & X86_EFLAGS_VIF)
+ flags |= X86_EFLAGS_IF;
+ flags |= X86_EFLAGS_IOPL;
return flags | (VEFLAGS & current->thread.v86mask);
}
-static inline int is_revectored(int nr, struct revectored_struct * bitmap)
+static inline int is_revectored(int nr, struct revectored_struct *bitmap)
{
__asm__ __volatile__("btl %2,%1\n\tsbbl %0,%0"
:"=r" (nr)
- :"m" (*bitmap),"r" (nr));
+ :"m" (*bitmap), "r" (nr));
return nr;
}
@@ -437,7 +441,7 @@
ptr--; \
if (put_user(__val, base + ptr) < 0) \
goto err_label; \
- } while(0)
+ } while (0)
#define pushw(base, ptr, val, err_label) \
do { \
@@ -448,7 +452,7 @@
ptr--; \
if (put_user(val_byte(__val, 0), base + ptr) < 0) \
goto err_label; \
- } while(0)
+ } while (0)
#define pushl(base, ptr, val, err_label) \
do { \
@@ -465,7 +469,7 @@
ptr--; \
if (put_user(val_byte(__val, 0), base + ptr) < 0) \
goto err_label; \
- } while(0)
+ } while (0)
#define popb(base, ptr, err_label) \
({ \
@@ -512,7 +516,7 @@
* in userspace is always better than an Oops anyway.) [KD]
*/
static void do_int(struct kernel_vm86_regs *regs, int i,
- unsigned char __user * ssp, unsigned short sp)
+ unsigned char __user *ssp, unsigned short sp)
{
unsigned long __user *intr_ptr;
unsigned long segoffs;
@@ -521,7 +525,7 @@
goto cannot_handle;
if (is_revectored(i, &KVM86->int_revectored))
goto cannot_handle;
- if (i==0x21 && is_revectored(AH(regs),&KVM86->int21_revectored))
+ if (i == 0x21 && is_revectored(AH(regs), &KVM86->int21_revectored))
goto cannot_handle;
intr_ptr = (unsigned long __user *) (i << 2);
if (get_user(segoffs, intr_ptr))
@@ -543,30 +547,23 @@
return_to_32bit(regs, VM86_INTx + (i << 8));
}
-int handle_vm86_trap(struct kernel_vm86_regs * regs, long error_code, int trapno)
+int handle_vm86_trap(struct kernel_vm86_regs *regs, long error_code, int trapno)
{
if (VMPI.is_vm86pus) {
- if ( (trapno==3) || (trapno==1) )
+ if ((trapno == 3) || (trapno == 1))
return_to_32bit(regs, VM86_TRAP + (trapno << 8));
do_int(regs, trapno, (unsigned char __user *) (regs->pt.ss << 4), SP(regs));
return 0;
}
- if (trapno !=1)
+ if (trapno != 1)
return 1; /* we let this handle by the calling routine */
- if (current->ptrace & PT_PTRACED) {
- unsigned long flags;
- spin_lock_irqsave(¤t->sighand->siglock, flags);
- sigdelset(¤t->blocked, SIGTRAP);
- recalc_sigpending();
- spin_unlock_irqrestore(¤t->sighand->siglock, flags);
- }
- send_sig(SIGTRAP, current, 1);
current->thread.trap_no = trapno;
current->thread.error_code = error_code;
+ force_sig(SIGTRAP, current);
return 0;
}
-void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code)
+void handle_vm86_fault(struct kernel_vm86_regs *regs, long error_code)
{
unsigned char opcode;
unsigned char __user *csp;
@@ -576,11 +573,11 @@
#define CHECK_IF_IN_TRAP \
if (VMPI.vm86dbg_active && VMPI.vm86dbg_TFpendig) \
- newflags |= TF_MASK
+ newflags |= X86_EFLAGS_TF
#define VM86_FAULT_RETURN do { \
- if (VMPI.force_return_for_pic && (VEFLAGS & (IF_MASK | VIF_MASK))) \
+ if (VMPI.force_return_for_pic && (VEFLAGS & (X86_EFLAGS_IF | X86_EFLAGS_VIF))) \
return_to_32bit(regs, VM86_PICRETURN); \
- if (orig_flags & TF_MASK) \
+ if (orig_flags & X86_EFLAGS_TF) \
handle_vm86_trap(regs, 0, 1); \
return; } while (0)
@@ -595,17 +592,17 @@
pref_done = 0;
do {
switch (opcode = popb(csp, ip, simulate_sigsegv)) {
- case 0x66: /* 32-bit data */ data32=1; break;
- case 0x67: /* 32-bit address */ break;
- case 0x2e: /* CS */ break;
- case 0x3e: /* DS */ break;
- case 0x26: /* ES */ break;
- case 0x36: /* SS */ break;
- case 0x65: /* GS */ break;
- case 0x64: /* FS */ break;
- case 0xf2: /* repnz */ break;
- case 0xf3: /* rep */ break;
- default: pref_done = 1;
+ case 0x66: /* 32-bit data */ data32 = 1; break;
+ case 0x67: /* 32-bit address */ break;
+ case 0x2e: /* CS */ break;
+ case 0x3e: /* DS */ break;
+ case 0x26: /* ES */ break;
+ case 0x36: /* SS */ break;
+ case 0x65: /* GS */ break;
+ case 0x64: /* FS */ break;
+ case 0xf2: /* repnz */ break;
+ case 0xf3: /* rep */ break;
+ default: pref_done = 1;
}
} while (!pref_done);
@@ -628,7 +625,7 @@
{
unsigned long newflags;
if (data32) {
- newflags=popl(ssp, sp, simulate_sigsegv);
+ newflags = popl(ssp, sp, simulate_sigsegv);
SP(regs) += 4;
} else {
newflags = popw(ssp, sp, simulate_sigsegv);
@@ -636,20 +633,20 @@
}
IP(regs) = ip;
CHECK_IF_IN_TRAP;
- if (data32) {
+ if (data32)
set_vflags_long(newflags, regs);
- } else {
+ else
set_vflags_short(newflags, regs);
- }
+
VM86_FAULT_RETURN;
}
/* int xx */
case 0xcd: {
- int intno=popb(csp, ip, simulate_sigsegv);
+ int intno = popb(csp, ip, simulate_sigsegv);
IP(regs) = ip;
if (VMPI.vm86dbg_active) {
- if ( (1 << (intno &7)) & VMPI.vm86dbg_intxxtab[intno >> 3] )
+ if ((1 << (intno & 7)) & VMPI.vm86dbg_intxxtab[intno >> 3])
return_to_32bit(regs, VM86_INTx + (intno << 8));
}
do_int(regs, intno, ssp, sp);
@@ -663,9 +660,9 @@
unsigned long newcs;
unsigned long newflags;
if (data32) {
- newip=popl(ssp, sp, simulate_sigsegv);
- newcs=popl(ssp, sp, simulate_sigsegv);
- newflags=popl(ssp, sp, simulate_sigsegv);
+ newip = popl(ssp, sp, simulate_sigsegv);
+ newcs = popl(ssp, sp, simulate_sigsegv);
+ newflags = popl(ssp, sp, simulate_sigsegv);
SP(regs) += 12;
} else {
newip = popw(ssp, sp, simulate_sigsegv);
@@ -734,18 +731,18 @@
static DEFINE_SPINLOCK(irqbits_lock);
static int irqbits;
-#define ALLOWED_SIGS ( 1 /* 0 = don't send a signal */ \
+#define ALLOWED_SIGS (1 /* 0 = don't send a signal */ \
| (1 << SIGUSR1) | (1 << SIGUSR2) | (1 << SIGIO) | (1 << SIGURG) \
- | (1 << SIGUNUSED) )
-
+ | (1 << SIGUNUSED))
+
static irqreturn_t irq_handler(int intno, void *dev_id)
{
int irq_bit;
unsigned long flags;
- spin_lock_irqsave(&irqbits_lock, flags);
+ spin_lock_irqsave(&irqbits_lock, flags);
irq_bit = 1 << intno;
- if ((irqbits & irq_bit) || ! vm86_irqs[intno].tsk)
+ if ((irqbits & irq_bit) || !vm86_irqs[intno].tsk)
goto out;
irqbits |= irq_bit;
if (vm86_irqs[intno].sig)
@@ -759,7 +756,7 @@
return IRQ_HANDLED;
out:
- spin_unlock_irqrestore(&irqbits_lock, flags);
+ spin_unlock_irqrestore(&irqbits_lock, flags);
return IRQ_NONE;
}
@@ -770,9 +767,9 @@
free_irq(irqnumber, NULL);
vm86_irqs[irqnumber].tsk = NULL;
- spin_lock_irqsave(&irqbits_lock, flags);
+ spin_lock_irqsave(&irqbits_lock, flags);
irqbits &= ~(1 << irqnumber);
- spin_unlock_irqrestore(&irqbits_lock, flags);
+ spin_unlock_irqrestore(&irqbits_lock, flags);
}
void release_vm86_irqs(struct task_struct *task)
@@ -788,10 +785,10 @@
int bit;
unsigned long flags;
int ret = 0;
-
+
if (invalid_vm86_irq(irqnumber)) return 0;
if (vm86_irqs[irqnumber].tsk != current) return 0;
- spin_lock_irqsave(&irqbits_lock, flags);
+ spin_lock_irqsave(&irqbits_lock, flags);
bit = irqbits & (1 << irqnumber);
irqbits &= ~bit;
if (bit) {
@@ -799,7 +796,7 @@
ret = 1;
}
- spin_unlock_irqrestore(&irqbits_lock, flags);
+ spin_unlock_irqrestore(&irqbits_lock, flags);
return ret;
}
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index 2ffa965..ce5ed08 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -149,6 +149,11 @@
*(.con_initcall.init)
__con_initcall_end = .;
}
+ .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
+ __x86cpuvendor_start = .;
+ *(.x86cpuvendor.init)
+ __x86cpuvendor_end = .;
+ }
SECURITY_INIT
. = ALIGN(4);
.altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index fab1322..b7ab3c3 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -177,6 +177,11 @@
*(.con_initcall.init)
}
__con_initcall_end = .;
+ __x86cpuvendor_start = .;
+ .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
+ *(.x86cpuvendor.init)
+ }
+ __x86cpuvendor_end = .;
SECURITY_INIT
. = ALIGN(8);
@@ -247,3 +252,9 @@
DWARF_DEBUG
}
+
+/*
+ * Build-time check on the image size:
+ */
+ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE")
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index d971210..caf2a26 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -8,6 +8,8 @@
*
* Ravikiran Thirumalai <kiran@scalemp.com>,
* Shai Fultheim <shai@scalemp.com>
+ * Paravirt ops integration: Glauber de Oliveira Costa <gcosta@redhat.com>,
+ * Ravikiran Thirumalai <kiran@scalemp.com>
*/
#include <linux/init.h>
@@ -15,38 +17,137 @@
#include <linux/pci_regs.h>
#include <asm/pci-direct.h>
#include <asm/io.h>
+#include <asm/paravirt.h>
-static int __init vsmp_init(void)
+#if defined CONFIG_PCI && defined CONFIG_PARAVIRT
+/*
+ * Interrupt control on vSMPowered systems:
+ * ~AC is a shadow of IF. If IF is 'on' AC should be 'off'
+ * and vice versa.
+ */
+
+static unsigned long vsmp_save_fl(void)
+{
+ unsigned long flags = native_save_fl();
+
+ if (!(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC))
+ flags &= ~X86_EFLAGS_IF;
+ return flags;
+}
+
+static void vsmp_restore_fl(unsigned long flags)
+{
+ if (flags & X86_EFLAGS_IF)
+ flags &= ~X86_EFLAGS_AC;
+ else
+ flags |= X86_EFLAGS_AC;
+ native_restore_fl(flags);
+}
+
+static void vsmp_irq_disable(void)
+{
+ unsigned long flags = native_save_fl();
+
+ native_restore_fl((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
+}
+
+static void vsmp_irq_enable(void)
+{
+ unsigned long flags = native_save_fl();
+
+ native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
+}
+
+static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf,
+ unsigned long addr, unsigned len)
+{
+ switch (type) {
+ case PARAVIRT_PATCH(pv_irq_ops.irq_enable):
+ case PARAVIRT_PATCH(pv_irq_ops.irq_disable):
+ case PARAVIRT_PATCH(pv_irq_ops.save_fl):
+ case PARAVIRT_PATCH(pv_irq_ops.restore_fl):
+ return paravirt_patch_default(type, clobbers, ibuf, addr, len);
+ default:
+ return native_patch(type, clobbers, ibuf, addr, len);
+ }
+
+}
+
+static void __init set_vsmp_pv_ops(void)
{
void *address;
- unsigned int cap, ctl;
-
- if (!early_pci_allowed())
- return 0;
-
- /* Check if we are running on a ScaleMP vSMP box */
- if ((read_pci_config_16(0, 0x1f, 0, PCI_VENDOR_ID) !=
- PCI_VENDOR_ID_SCALEMP) ||
- (read_pci_config_16(0, 0x1f, 0, PCI_DEVICE_ID) !=
- PCI_DEVICE_ID_SCALEMP_VSMP_CTL))
- return 0;
+ unsigned int cap, ctl, cfg;
/* set vSMP magic bits to indicate vSMP capable kernel */
- address = ioremap(read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0), 8);
+ cfg = read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0);
+ address = early_ioremap(cfg, 8);
cap = readl(address);
ctl = readl(address + 4);
printk(KERN_INFO "vSMP CTL: capabilities:0x%08x control:0x%08x\n",
cap, ctl);
if (cap & ctl & (1 << 4)) {
- /* Turn on vSMP IRQ fastpath handling (see system.h) */
+ /* Setup irq ops and turn on vSMP IRQ fastpath handling */
+ pv_irq_ops.irq_disable = vsmp_irq_disable;
+ pv_irq_ops.irq_enable = vsmp_irq_enable;
+ pv_irq_ops.save_fl = vsmp_save_fl;
+ pv_irq_ops.restore_fl = vsmp_restore_fl;
+ pv_init_ops.patch = vsmp_patch;
+
ctl &= ~(1 << 4);
writel(ctl, address + 4);
ctl = readl(address + 4);
printk(KERN_INFO "vSMP CTL: control set to:0x%08x\n", ctl);
}
- iounmap(address);
- return 0;
+ early_iounmap(address, 8);
+}
+#else
+static void __init set_vsmp_pv_ops(void)
+{
+}
+#endif
+
+#ifdef CONFIG_PCI
+static int is_vsmp = -1;
+
+static void __init detect_vsmp_box(void)
+{
+ is_vsmp = 0;
+
+ if (!early_pci_allowed())
+ return;
+
+ /* Check if we are running on a ScaleMP vSMPowered box */
+ if (read_pci_config(0, 0x1f, 0, PCI_VENDOR_ID) ==
+ (PCI_VENDOR_ID_SCALEMP | (PCI_DEVICE_ID_SCALEMP_VSMP_CTL << 16)))
+ is_vsmp = 1;
}
-core_initcall(vsmp_init);
+int is_vsmp_box(void)
+{
+ if (is_vsmp != -1)
+ return is_vsmp;
+ else {
+ WARN_ON_ONCE(1);
+ return 0;
+ }
+}
+#else
+static int __init detect_vsmp_box(void)
+{
+}
+int is_vsmp_box(void)
+{
+ return 0;
+}
+#endif
+
+void __init vsmp_init(void)
+{
+ detect_vsmp_box();
+ if (!is_vsmp_box())
+ return;
+
+ set_vsmp_pv_ops();
+ return;
+}
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index a66e9c1..58882f9 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -4,7 +4,6 @@
#include <linux/module.h>
#include <linux/smp.h>
-#include <asm/semaphore.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
@@ -12,11 +11,6 @@
EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
-
EXPORT_SYMBOL(__get_user_1);
EXPORT_SYMBOL(__get_user_2);
EXPORT_SYMBOL(__get_user_4);
@@ -35,15 +29,17 @@
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(clear_page);
-/* Export string functions. We normally rely on gcc builtin for most of these,
- but gcc sometimes decides not to inline them. */
+/*
+ * Export string functions. We normally rely on gcc builtin for most of these,
+ * but gcc sometimes decides not to inline them.
+ */
#undef memcpy
#undef memset
#undef memmove
-extern void * memset(void *,int,__kernel_size_t);
-extern void * memcpy(void *,const void *,__kernel_size_t);
-extern void * __memcpy(void *,const void *,__kernel_size_t);
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *__memcpy(void *, const void *, __kernel_size_t);
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 3335b45..af65b2d 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -661,7 +661,7 @@
if (delta < LG_CLOCK_MIN_DELTA) {
if (printk_ratelimit())
printk(KERN_DEBUG "%s: small delta %lu ns\n",
- __FUNCTION__, delta);
+ __func__, delta);
return -ETIME;
}
diff --git a/arch/x86/lib/memcpy_32.c b/arch/x86/lib/memcpy_32.c
index 37756b6..5415a9d 100644
--- a/arch/x86/lib/memcpy_32.c
+++ b/arch/x86/lib/memcpy_32.c
@@ -25,7 +25,7 @@
int d0, d1, d2;
if (dest < src) {
- memcpy(dest,src,n);
+ memcpy(dest, src, n);
} else {
__asm__ __volatile__(
"std\n\t"
diff --git a/arch/x86/lib/memmove_64.c b/arch/x86/lib/memmove_64.c
index 80175e4..0a33909 100644
--- a/arch/x86/lib/memmove_64.c
+++ b/arch/x86/lib/memmove_64.c
@@ -6,10 +6,10 @@
#include <linux/module.h>
#undef memmove
-void *memmove(void * dest,const void *src,size_t count)
+void *memmove(void *dest, const void *src, size_t count)
{
- if (dest < src) {
- return memcpy(dest,src,count);
+ if (dest < src) {
+ return memcpy(dest, src, count);
} else {
char *p = dest + count;
const char *s = src + count;
@@ -17,5 +17,5 @@
*--p = *--s;
}
return dest;
-}
+}
EXPORT_SYMBOL(memmove);
diff --git a/arch/x86/lib/mmx_32.c b/arch/x86/lib/mmx_32.c
index cc9b4a4..c9f2d9b 100644
--- a/arch/x86/lib/mmx_32.c
+++ b/arch/x86/lib/mmx_32.c
@@ -1,32 +1,30 @@
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/hardirq.h>
-#include <linux/module.h>
-
-#include <asm/asm.h>
-#include <asm/i387.h>
-
-
/*
* MMX 3DNow! library helper functions
*
* To do:
- * We can use MMX just for prefetch in IRQ's. This may be a win.
+ * We can use MMX just for prefetch in IRQ's. This may be a win.
* (reported so on K6-III)
* We should use a better code neutral filler for the short jump
* leal ebx. [ebx] is apparently best for K6-2, but Cyrix ??
* We also want to clobber the filler register so we don't get any
- * register forwarding stalls on the filler.
+ * register forwarding stalls on the filler.
*
* Add *user handling. Checksums are not a win with MMX on any CPU
* tested so far for any MMX solution figured.
*
- * 22/09/2000 - Arjan van de Ven
- * Improved for non-egineering-sample Athlons
+ * 22/09/2000 - Arjan van de Ven
+ * Improved for non-egineering-sample Athlons
*
*/
-
+#include <linux/hardirq.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+
+#include <asm/i387.h>
+#include <asm/asm.h>
+
void *_mmx_memcpy(void *to, const void *from, size_t len)
{
void *p;
@@ -51,12 +49,10 @@
"3: movw $0x1AEB, 1b\n" /* jmp on 26 bytes */
" jmp 2b\n"
".previous\n"
- _ASM_EXTABLE(1b,3b)
- : : "r" (from) );
-
-
- for(; i>5; i--)
- {
+ _ASM_EXTABLE(1b, 3b)
+ : : "r" (from));
+
+ for ( ; i > 5; i--) {
__asm__ __volatile__ (
"1: prefetch 320(%0)\n"
"2: movq (%0), %%mm0\n"
@@ -79,14 +75,14 @@
"3: movw $0x05EB, 1b\n" /* jmp on 5 bytes */
" jmp 2b\n"
".previous\n"
- _ASM_EXTABLE(1b,3b)
- : : "r" (from), "r" (to) : "memory");
- from+=64;
- to+=64;
+ _ASM_EXTABLE(1b, 3b)
+ : : "r" (from), "r" (to) : "memory");
+
+ from += 64;
+ to += 64;
}
- for(; i>0; i--)
- {
+ for ( ; i > 0; i--) {
__asm__ __volatile__ (
" movq (%0), %%mm0\n"
" movq 8(%0), %%mm1\n"
@@ -104,17 +100,20 @@
" movq %%mm1, 40(%1)\n"
" movq %%mm2, 48(%1)\n"
" movq %%mm3, 56(%1)\n"
- : : "r" (from), "r" (to) : "memory");
- from+=64;
- to+=64;
+ : : "r" (from), "r" (to) : "memory");
+
+ from += 64;
+ to += 64;
}
/*
- * Now do the tail of the block
+ * Now do the tail of the block:
*/
- __memcpy(to, from, len&63);
+ __memcpy(to, from, len & 63);
kernel_fpu_end();
+
return p;
}
+EXPORT_SYMBOL(_mmx_memcpy);
#ifdef CONFIG_MK7
@@ -128,13 +127,12 @@
int i;
kernel_fpu_begin();
-
+
__asm__ __volatile__ (
" pxor %%mm0, %%mm0\n" : :
);
- for(i=0;i<4096/64;i++)
- {
+ for (i = 0; i < 4096/64; i++) {
__asm__ __volatile__ (
" movntq %%mm0, (%0)\n"
" movntq %%mm0, 8(%0)\n"
@@ -145,14 +143,15 @@
" movntq %%mm0, 48(%0)\n"
" movntq %%mm0, 56(%0)\n"
: : "r" (page) : "memory");
- page+=64;
+ page += 64;
}
- /* since movntq is weakly-ordered, a "sfence" is needed to become
- * ordered again.
+
+ /*
+ * Since movntq is weakly-ordered, a "sfence" is needed to become
+ * ordered again:
*/
- __asm__ __volatile__ (
- " sfence \n" : :
- );
+ __asm__ __volatile__("sfence\n"::);
+
kernel_fpu_end();
}
@@ -162,10 +161,11 @@
kernel_fpu_begin();
- /* maybe the prefetch stuff can go before the expensive fnsave...
+ /*
+ * maybe the prefetch stuff can go before the expensive fnsave...
* but that is for later. -AV
*/
- __asm__ __volatile__ (
+ __asm__ __volatile__(
"1: prefetch (%0)\n"
" prefetch 64(%0)\n"
" prefetch 128(%0)\n"
@@ -176,11 +176,9 @@
"3: movw $0x1AEB, 1b\n" /* jmp on 26 bytes */
" jmp 2b\n"
".previous\n"
- _ASM_EXTABLE(1b,3b)
- : : "r" (from) );
+ _ASM_EXTABLE(1b, 3b) : : "r" (from));
- for(i=0; i<(4096-320)/64; i++)
- {
+ for (i = 0; i < (4096-320)/64; i++) {
__asm__ __volatile__ (
"1: prefetch 320(%0)\n"
"2: movq (%0), %%mm0\n"
@@ -203,13 +201,13 @@
"3: movw $0x05EB, 1b\n" /* jmp on 5 bytes */
" jmp 2b\n"
".previous\n"
- _ASM_EXTABLE(1b,3b)
- : : "r" (from), "r" (to) : "memory");
- from+=64;
- to+=64;
+ _ASM_EXTABLE(1b, 3b) : : "r" (from), "r" (to) : "memory");
+
+ from += 64;
+ to += 64;
}
- for(i=(4096-320)/64; i<4096/64; i++)
- {
+
+ for (i = (4096-320)/64; i < 4096/64; i++) {
__asm__ __volatile__ (
"2: movq (%0), %%mm0\n"
" movntq %%mm0, (%1)\n"
@@ -227,37 +225,34 @@
" movntq %%mm6, 48(%1)\n"
" movq 56(%0), %%mm7\n"
" movntq %%mm7, 56(%1)\n"
- : : "r" (from), "r" (to) : "memory");
- from+=64;
- to+=64;
+ : : "r" (from), "r" (to) : "memory");
+ from += 64;
+ to += 64;
}
- /* since movntq is weakly-ordered, a "sfence" is needed to become
- * ordered again.
+ /*
+ * Since movntq is weakly-ordered, a "sfence" is needed to become
+ * ordered again:
*/
- __asm__ __volatile__ (
- " sfence \n" : :
- );
+ __asm__ __volatile__("sfence \n"::);
kernel_fpu_end();
}
-#else
+#else /* CONFIG_MK7 */
/*
* Generic MMX implementation without K7 specific streaming
*/
-
static void fast_clear_page(void *page)
{
int i;
-
+
kernel_fpu_begin();
-
+
__asm__ __volatile__ (
" pxor %%mm0, %%mm0\n" : :
);
- for(i=0;i<4096/128;i++)
- {
+ for (i = 0; i < 4096/128; i++) {
__asm__ __volatile__ (
" movq %%mm0, (%0)\n"
" movq %%mm0, 8(%0)\n"
@@ -275,8 +270,8 @@
" movq %%mm0, 104(%0)\n"
" movq %%mm0, 112(%0)\n"
" movq %%mm0, 120(%0)\n"
- : : "r" (page) : "memory");
- page+=128;
+ : : "r" (page) : "memory");
+ page += 128;
}
kernel_fpu_end();
@@ -285,8 +280,7 @@
static void fast_copy_page(void *to, void *from)
{
int i;
-
-
+
kernel_fpu_begin();
__asm__ __volatile__ (
@@ -300,11 +294,9 @@
"3: movw $0x1AEB, 1b\n" /* jmp on 26 bytes */
" jmp 2b\n"
".previous\n"
- _ASM_EXTABLE(1b,3b)
- : : "r" (from) );
+ _ASM_EXTABLE(1b, 3b) : : "r" (from));
- for(i=0; i<4096/64; i++)
- {
+ for (i = 0; i < 4096/64; i++) {
__asm__ __volatile__ (
"1: prefetch 320(%0)\n"
"2: movq (%0), %%mm0\n"
@@ -327,60 +319,59 @@
"3: movw $0x05EB, 1b\n" /* jmp on 5 bytes */
" jmp 2b\n"
".previous\n"
- _ASM_EXTABLE(1b,3b)
- : : "r" (from), "r" (to) : "memory");
- from+=64;
- to+=64;
+ _ASM_EXTABLE(1b, 3b)
+ : : "r" (from), "r" (to) : "memory");
+
+ from += 64;
+ to += 64;
}
kernel_fpu_end();
}
-
-#endif
+#endif /* !CONFIG_MK7 */
/*
- * Favour MMX for page clear and copy.
+ * Favour MMX for page clear and copy:
*/
-
-static void slow_zero_page(void * page)
+static void slow_zero_page(void *page)
{
int d0, d1;
- __asm__ __volatile__( \
- "cld\n\t" \
- "rep ; stosl" \
- : "=&c" (d0), "=&D" (d1)
- :"a" (0),"1" (page),"0" (1024)
- :"memory");
+
+ __asm__ __volatile__(
+ "cld\n\t"
+ "rep ; stosl"
+
+ : "=&c" (d0), "=&D" (d1)
+ :"a" (0), "1" (page), "0" (1024)
+ :"memory");
}
-
-void mmx_clear_page(void * page)
+
+void mmx_clear_page(void *page)
{
- if(unlikely(in_interrupt()))
+ if (unlikely(in_interrupt()))
slow_zero_page(page);
else
fast_clear_page(page);
}
+EXPORT_SYMBOL(mmx_clear_page);
static void slow_copy_page(void *to, void *from)
{
int d0, d1, d2;
- __asm__ __volatile__( \
- "cld\n\t" \
- "rep ; movsl" \
- : "=&c" (d0), "=&D" (d1), "=&S" (d2) \
- : "0" (1024),"1" ((long) to),"2" ((long) from) \
+
+ __asm__ __volatile__(
+ "cld\n\t"
+ "rep ; movsl"
+ : "=&c" (d0), "=&D" (d1), "=&S" (d2)
+ : "0" (1024), "1" ((long) to), "2" ((long) from)
: "memory");
}
-
void mmx_copy_page(void *to, void *from)
{
- if(unlikely(in_interrupt()))
+ if (unlikely(in_interrupt()))
slow_copy_page(to, from);
else
fast_copy_page(to, from);
}
-
-EXPORT_SYMBOL(_mmx_memcpy);
-EXPORT_SYMBOL(mmx_clear_page);
EXPORT_SYMBOL(mmx_copy_page);
diff --git a/arch/x86/lib/semaphore_32.S b/arch/x86/lib/semaphore_32.S
index 3899bd3..648fe47 100644
--- a/arch/x86/lib/semaphore_32.S
+++ b/arch/x86/lib/semaphore_32.S
@@ -30,89 +30,6 @@
* value or just clobbered..
*/
.section .sched.text, "ax"
-ENTRY(__down_failed)
- CFI_STARTPROC
- FRAME
- pushl %edx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET edx,0
- pushl %ecx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET ecx,0
- call __down
- popl %ecx
- CFI_ADJUST_CFA_OFFSET -4
- CFI_RESTORE ecx
- popl %edx
- CFI_ADJUST_CFA_OFFSET -4
- CFI_RESTORE edx
- ENDFRAME
- ret
- CFI_ENDPROC
- ENDPROC(__down_failed)
-
-ENTRY(__down_failed_interruptible)
- CFI_STARTPROC
- FRAME
- pushl %edx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET edx,0
- pushl %ecx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET ecx,0
- call __down_interruptible
- popl %ecx
- CFI_ADJUST_CFA_OFFSET -4
- CFI_RESTORE ecx
- popl %edx
- CFI_ADJUST_CFA_OFFSET -4
- CFI_RESTORE edx
- ENDFRAME
- ret
- CFI_ENDPROC
- ENDPROC(__down_failed_interruptible)
-
-ENTRY(__down_failed_trylock)
- CFI_STARTPROC
- FRAME
- pushl %edx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET edx,0
- pushl %ecx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET ecx,0
- call __down_trylock
- popl %ecx
- CFI_ADJUST_CFA_OFFSET -4
- CFI_RESTORE ecx
- popl %edx
- CFI_ADJUST_CFA_OFFSET -4
- CFI_RESTORE edx
- ENDFRAME
- ret
- CFI_ENDPROC
- ENDPROC(__down_failed_trylock)
-
-ENTRY(__up_wakeup)
- CFI_STARTPROC
- FRAME
- pushl %edx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET edx,0
- pushl %ecx
- CFI_ADJUST_CFA_OFFSET 4
- CFI_REL_OFFSET ecx,0
- call __up
- popl %ecx
- CFI_ADJUST_CFA_OFFSET -4
- CFI_RESTORE ecx
- popl %edx
- CFI_ADJUST_CFA_OFFSET -4
- CFI_RESTORE edx
- ENDFRAME
- ret
- CFI_ENDPROC
- ENDPROC(__up_wakeup)
/*
* rw spinlock fallbacks
diff --git a/arch/x86/lib/string_32.c b/arch/x86/lib/string_32.c
index c2c0504..94972e7 100644
--- a/arch/x86/lib/string_32.c
+++ b/arch/x86/lib/string_32.c
@@ -14,25 +14,25 @@
#include <linux/module.h>
#ifdef __HAVE_ARCH_STRCPY
-char *strcpy(char * dest,const char *src)
+char *strcpy(char *dest, const char *src)
{
int d0, d1, d2;
- asm volatile( "1:\tlodsb\n\t"
+ asm volatile("1:\tlodsb\n\t"
"stosb\n\t"
"testb %%al,%%al\n\t"
"jne 1b"
: "=&S" (d0), "=&D" (d1), "=&a" (d2)
- :"0" (src),"1" (dest) : "memory");
+ :"0" (src), "1" (dest) : "memory");
return dest;
}
EXPORT_SYMBOL(strcpy);
#endif
#ifdef __HAVE_ARCH_STRNCPY
-char *strncpy(char * dest,const char *src,size_t count)
+char *strncpy(char *dest, const char *src, size_t count)
{
int d0, d1, d2, d3;
- asm volatile( "1:\tdecl %2\n\t"
+ asm volatile("1:\tdecl %2\n\t"
"js 2f\n\t"
"lodsb\n\t"
"stosb\n\t"
@@ -42,17 +42,17 @@
"stosb\n"
"2:"
: "=&S" (d0), "=&D" (d1), "=&c" (d2), "=&a" (d3)
- :"0" (src),"1" (dest),"2" (count) : "memory");
+ :"0" (src), "1" (dest), "2" (count) : "memory");
return dest;
}
EXPORT_SYMBOL(strncpy);
#endif
#ifdef __HAVE_ARCH_STRCAT
-char *strcat(char * dest,const char * src)
+char *strcat(char *dest, const char *src)
{
int d0, d1, d2, d3;
- asm volatile( "repne\n\t"
+ asm volatile("repne\n\t"
"scasb\n\t"
"decl %1\n"
"1:\tlodsb\n\t"
@@ -67,10 +67,10 @@
#endif
#ifdef __HAVE_ARCH_STRNCAT
-char *strncat(char * dest,const char * src,size_t count)
+char *strncat(char *dest, const char *src, size_t count)
{
int d0, d1, d2, d3;
- asm volatile( "repne\n\t"
+ asm volatile("repne\n\t"
"scasb\n\t"
"decl %1\n\t"
"movl %8,%3\n"
@@ -83,7 +83,7 @@
"2:\txorl %2,%2\n\t"
"stosb"
: "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3)
- : "0" (src),"1" (dest),"2" (0),"3" (0xffffffffu), "g" (count)
+ : "0" (src), "1" (dest), "2" (0), "3" (0xffffffffu), "g" (count)
: "memory");
return dest;
}
@@ -91,11 +91,11 @@
#endif
#ifdef __HAVE_ARCH_STRCMP
-int strcmp(const char * cs,const char * ct)
+int strcmp(const char *cs, const char *ct)
{
int d0, d1;
int res;
- asm volatile( "1:\tlodsb\n\t"
+ asm volatile("1:\tlodsb\n\t"
"scasb\n\t"
"jne 2f\n\t"
"testb %%al,%%al\n\t"
@@ -106,7 +106,7 @@
"orb $1,%%al\n"
"3:"
:"=a" (res), "=&S" (d0), "=&D" (d1)
- :"1" (cs),"2" (ct)
+ :"1" (cs), "2" (ct)
:"memory");
return res;
}
@@ -114,11 +114,11 @@
#endif
#ifdef __HAVE_ARCH_STRNCMP
-int strncmp(const char * cs,const char * ct,size_t count)
+int strncmp(const char *cs, const char *ct, size_t count)
{
int res;
int d0, d1, d2;
- asm volatile( "1:\tdecl %3\n\t"
+ asm volatile("1:\tdecl %3\n\t"
"js 2f\n\t"
"lodsb\n\t"
"scasb\n\t"
@@ -131,7 +131,7 @@
"orb $1,%%al\n"
"4:"
:"=a" (res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
- :"1" (cs),"2" (ct),"3" (count)
+ :"1" (cs), "2" (ct), "3" (count)
:"memory");
return res;
}
@@ -139,11 +139,11 @@
#endif
#ifdef __HAVE_ARCH_STRCHR
-char *strchr(const char * s, int c)
+char *strchr(const char *s, int c)
{
int d0;
- char * res;
- asm volatile( "movb %%al,%%ah\n"
+ char *res;
+ asm volatile("movb %%al,%%ah\n"
"1:\tlodsb\n\t"
"cmpb %%ah,%%al\n\t"
"je 2f\n\t"
@@ -153,7 +153,7 @@
"2:\tmovl %1,%0\n\t"
"decl %0"
:"=a" (res), "=&S" (d0)
- :"1" (s),"0" (c)
+ :"1" (s), "0" (c)
:"memory");
return res;
}
@@ -161,16 +161,16 @@
#endif
#ifdef __HAVE_ARCH_STRLEN
-size_t strlen(const char * s)
+size_t strlen(const char *s)
{
int d0;
int res;
- asm volatile( "repne\n\t"
+ asm volatile("repne\n\t"
"scasb\n\t"
"notl %0\n\t"
"decl %0"
:"=c" (res), "=&D" (d0)
- :"1" (s),"a" (0), "0" (0xffffffffu)
+ :"1" (s), "a" (0), "0" (0xffffffffu)
:"memory");
return res;
}
@@ -178,19 +178,19 @@
#endif
#ifdef __HAVE_ARCH_MEMCHR
-void *memchr(const void *cs,int c,size_t count)
+void *memchr(const void *cs, int c, size_t count)
{
int d0;
void *res;
if (!count)
return NULL;
- asm volatile( "repne\n\t"
+ asm volatile("repne\n\t"
"scasb\n\t"
"je 1f\n\t"
"movl $1,%0\n"
"1:\tdecl %0"
:"=D" (res), "=&c" (d0)
- :"a" (c),"0" (cs),"1" (count)
+ :"a" (c), "0" (cs), "1" (count)
:"memory");
return res;
}
@@ -198,7 +198,7 @@
#endif
#ifdef __HAVE_ARCH_MEMSCAN
-void *memscan(void * addr, int c, size_t size)
+void *memscan(void *addr, int c, size_t size)
{
if (!size)
return addr;
@@ -219,7 +219,7 @@
{
int d0;
int res;
- asm volatile( "movl %2,%0\n\t"
+ asm volatile("movl %2,%0\n\t"
"jmp 2f\n"
"1:\tcmpb $0,(%0)\n\t"
"je 3f\n\t"
@@ -229,7 +229,7 @@
"jne 1b\n"
"3:\tsubl %2,%0"
:"=a" (res), "=&d" (d0)
- :"c" (s),"1" (count)
+ :"c" (s), "1" (count)
:"memory");
return res;
}
diff --git a/arch/x86/lib/strstr_32.c b/arch/x86/lib/strstr_32.c
index a3dafbf..42e8a50 100644
--- a/arch/x86/lib/strstr_32.c
+++ b/arch/x86/lib/strstr_32.c
@@ -1,9 +1,9 @@
#include <linux/string.h>
-char * strstr(const char * cs,const char * ct)
+char *strstr(const char *cs, const char *ct)
{
int d0, d1;
-register char * __res;
+register char *__res;
__asm__ __volatile__(
"movl %6,%%edi\n\t"
"repne\n\t"
diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/lib/thunk_64.S
index 8b92d42..e009251 100644
--- a/arch/x86/lib/thunk_64.S
+++ b/arch/x86/lib/thunk_64.S
@@ -41,11 +41,6 @@
thunk rwsem_downgrade_thunk,rwsem_downgrade_wake
#endif
- thunk __down_failed,__down
- thunk_retrax __down_failed_interruptible,__down_interruptible
- thunk_retrax __down_failed_trylock,__down_trylock
- thunk __up_wakeup,__up
-
#ifdef CONFIG_TRACE_IRQFLAGS
thunk trace_hardirqs_on_thunk,trace_hardirqs_on
thunk trace_hardirqs_off_thunk,trace_hardirqs_off
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index e849b99..24e6094 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -1,4 +1,4 @@
-/*
+/*
* User address space access functions.
* The non inlined parts of asm-i386/uaccess.h are here.
*
@@ -22,14 +22,14 @@
#endif
return 1;
}
-#define movsl_is_ok(a1,a2,n) \
- __movsl_is_ok((unsigned long)(a1),(unsigned long)(a2),(n))
+#define movsl_is_ok(a1, a2, n) \
+ __movsl_is_ok((unsigned long)(a1), (unsigned long)(a2), (n))
/*
* Copy a null terminated string from userspace.
*/
-#define __do_strncpy_from_user(dst,src,count,res) \
+#define __do_strncpy_from_user(dst, src, count, res) \
do { \
int __d0, __d1, __d2; \
might_sleep(); \
@@ -61,7 +61,7 @@
* least @count bytes long.
* @src: Source address, in user space.
* @count: Maximum number of bytes to copy, including the trailing NUL.
- *
+ *
* Copies a NUL-terminated string from userspace to kernel space.
* Caller must check the specified block with access_ok() before calling
* this function.
@@ -90,7 +90,7 @@
* least @count bytes long.
* @src: Source address, in user space.
* @count: Maximum number of bytes to copy, including the trailing NUL.
- *
+ *
* Copies a NUL-terminated string from userspace to kernel space.
*
* On success, returns the length of the string (not including the trailing
@@ -120,7 +120,7 @@
do { \
int __d0; \
might_sleep(); \
- __asm__ __volatile__( \
+ __asm__ __volatile__( \
"0: rep; stosl\n" \
" movl %2,%0\n" \
"1: rep; stosb\n" \
@@ -333,17 +333,17 @@
__asm__ __volatile__(
" .align 2,0x90\n"
"0: movl 32(%4), %%eax\n"
- " cmpl $67, %0\n"
- " jbe 2f\n"
+ " cmpl $67, %0\n"
+ " jbe 2f\n"
"1: movl 64(%4), %%eax\n"
- " .align 2,0x90\n"
- "2: movl 0(%4), %%eax\n"
- "21: movl 4(%4), %%edx\n"
- " movl %%eax, 0(%3)\n"
- " movl %%edx, 4(%3)\n"
- "3: movl 8(%4), %%eax\n"
- "31: movl 12(%4),%%edx\n"
- " movl %%eax, 8(%3)\n"
+ " .align 2,0x90\n"
+ "2: movl 0(%4), %%eax\n"
+ "21: movl 4(%4), %%edx\n"
+ " movl %%eax, 0(%3)\n"
+ " movl %%edx, 4(%3)\n"
+ "3: movl 8(%4), %%eax\n"
+ "31: movl 12(%4),%%edx\n"
+ " movl %%eax, 8(%3)\n"
" movl %%edx, 12(%3)\n"
"4: movl 16(%4), %%eax\n"
"41: movl 20(%4), %%edx\n"
@@ -369,38 +369,38 @@
"91: movl 60(%4), %%edx\n"
" movl %%eax, 56(%3)\n"
" movl %%edx, 60(%3)\n"
- " addl $-64, %0\n"
- " addl $64, %4\n"
- " addl $64, %3\n"
- " cmpl $63, %0\n"
- " ja 0b\n"
- "5: movl %0, %%eax\n"
- " shrl $2, %0\n"
- " andl $3, %%eax\n"
- " cld\n"
- "6: rep; movsl\n"
+ " addl $-64, %0\n"
+ " addl $64, %4\n"
+ " addl $64, %3\n"
+ " cmpl $63, %0\n"
+ " ja 0b\n"
+ "5: movl %0, %%eax\n"
+ " shrl $2, %0\n"
+ " andl $3, %%eax\n"
+ " cld\n"
+ "6: rep; movsl\n"
" movl %%eax,%0\n"
- "7: rep; movsb\n"
- "8:\n"
+ "7: rep; movsb\n"
+ "8:\n"
".section .fixup,\"ax\"\n"
- "9: lea 0(%%eax,%0,4),%0\n"
- "16: pushl %0\n"
- " pushl %%eax\n"
+ "9: lea 0(%%eax,%0,4),%0\n"
+ "16: pushl %0\n"
+ " pushl %%eax\n"
" xorl %%eax,%%eax\n"
- " rep; stosb\n"
- " popl %%eax\n"
- " popl %0\n"
- " jmp 8b\n"
- ".previous\n"
+ " rep; stosb\n"
+ " popl %%eax\n"
+ " popl %0\n"
+ " jmp 8b\n"
+ ".previous\n"
".section __ex_table,\"a\"\n"
- " .align 4\n"
- " .long 0b,16b\n"
+ " .align 4\n"
+ " .long 0b,16b\n"
" .long 1b,16b\n"
" .long 2b,16b\n"
" .long 21b,16b\n"
- " .long 3b,16b\n"
+ " .long 3b,16b\n"
" .long 31b,16b\n"
- " .long 4b,16b\n"
+ " .long 4b,16b\n"
" .long 41b,16b\n"
" .long 10b,16b\n"
" .long 51b,16b\n"
@@ -412,9 +412,9 @@
" .long 81b,16b\n"
" .long 14b,16b\n"
" .long 91b,16b\n"
- " .long 6b,9b\n"
- " .long 7b,16b\n"
- ".previous"
+ " .long 6b,9b\n"
+ " .long 7b,16b\n"
+ ".previous"
: "=&c"(size), "=&D" (d0), "=&S" (d1)
: "1"(to), "2"(from), "0"(size)
: "eax", "edx", "memory");
@@ -429,7 +429,7 @@
static unsigned long __copy_user_zeroing_intel_nocache(void *to,
const void __user *from, unsigned long size)
{
- int d0, d1;
+ int d0, d1;
__asm__ __volatile__(
" .align 2,0x90\n"
@@ -526,7 +526,7 @@
static unsigned long __copy_user_intel_nocache(void *to,
const void __user *from, unsigned long size)
{
- int d0, d1;
+ int d0, d1;
__asm__ __volatile__(
" .align 2,0x90\n"
@@ -629,7 +629,7 @@
#endif /* CONFIG_X86_INTEL_USERCOPY */
/* Generic arbitrary sized copy. */
-#define __copy_user(to,from,size) \
+#define __copy_user(to, from, size) \
do { \
int __d0, __d1, __d2; \
__asm__ __volatile__( \
@@ -665,7 +665,7 @@
: "memory"); \
} while (0)
-#define __copy_user_zeroing(to,from,size) \
+#define __copy_user_zeroing(to, from, size) \
do { \
int __d0, __d1, __d2; \
__asm__ __volatile__( \
@@ -712,7 +712,7 @@
{
#ifndef CONFIG_X86_WP_WORKS_OK
if (unlikely(boot_cpu_data.wp_works_ok == 0) &&
- ((unsigned long )to) < TASK_SIZE) {
+ ((unsigned long)to) < TASK_SIZE) {
/*
* When we are in an atomic section (see
* mm/filemap.c:file_read_actor), return the full
@@ -721,26 +721,26 @@
if (in_atomic())
return n;
- /*
+ /*
* CPU does not honor the WP bit when writing
* from supervisory mode, and due to preemption or SMP,
* the page tables can change at any time.
* Do it manually. Manfred <manfred@colorfullife.com>
*/
while (n) {
- unsigned long offset = ((unsigned long)to)%PAGE_SIZE;
+ unsigned long offset = ((unsigned long)to)%PAGE_SIZE;
unsigned long len = PAGE_SIZE - offset;
int retval;
struct page *pg;
void *maddr;
-
+
if (len > n)
len = n;
survive:
down_read(¤t->mm->mmap_sem);
retval = get_user_pages(current, current->mm,
- (unsigned long )to, 1, 1, 0, &pg, NULL);
+ (unsigned long)to, 1, 1, 0, &pg, NULL);
if (retval == -ENOMEM && is_global_init(current)) {
up_read(¤t->mm->mmap_sem);
@@ -750,8 +750,8 @@
if (retval != 1) {
up_read(¤t->mm->mmap_sem);
- break;
- }
+ break;
+ }
maddr = kmap_atomic(pg, KM_USER0);
memcpy(maddr + offset, from, len);
@@ -802,12 +802,12 @@
unsigned long n)
{
#ifdef CONFIG_X86_INTEL_USERCOPY
- if ( n > 64 && cpu_has_xmm2)
- n = __copy_user_zeroing_intel_nocache(to, from, n);
+ if (n > 64 && cpu_has_xmm2)
+ n = __copy_user_zeroing_intel_nocache(to, from, n);
else
__copy_user_zeroing(to, from, n);
#else
- __copy_user_zeroing(to, from, n);
+ __copy_user_zeroing(to, from, n);
#endif
return n;
}
@@ -817,12 +817,12 @@
unsigned long n)
{
#ifdef CONFIG_X86_INTEL_USERCOPY
- if ( n > 64 && cpu_has_xmm2)
- n = __copy_user_intel_nocache(to, from, n);
+ if (n > 64 && cpu_has_xmm2)
+ n = __copy_user_intel_nocache(to, from, n);
else
__copy_user(to, from, n);
#else
- __copy_user(to, from, n);
+ __copy_user(to, from, n);
#endif
return n;
}
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 292a225..95fc463 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -1,4 +1,4 @@
-/*
+/*
* APIC driver for "bigsmp" XAPIC machines with more than 8 virtual CPUs.
* Drives the local APIC in "clustered mode".
*/
@@ -32,26 +32,26 @@
static const struct dmi_system_id bigsmp_dmi_table[] = {
- { hp_ht_bigsmp, "HP ProLiant DL760 G2", {
- DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
- DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
- }},
+ { hp_ht_bigsmp, "HP ProLiant DL760 G2",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+ DMI_MATCH(DMI_BIOS_VERSION, "P44-"),}
+ },
- { hp_ht_bigsmp, "HP ProLiant DL740", {
- DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
- DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
- }},
+ { hp_ht_bigsmp, "HP ProLiant DL740",
+ { DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+ DMI_MATCH(DMI_BIOS_VERSION, "P47-"),}
+ },
{ }
};
static int probe_bigsmp(void)
-{
+{
if (def_to_bigsmp)
- dmi_bigsmp = 1;
+ dmi_bigsmp = 1;
else
dmi_check_system(bigsmp_dmi_table);
- return dmi_bigsmp;
-}
+ return dmi_bigsmp;
+}
-struct genapic apic_bigsmp = APIC_INIT("bigsmp", probe_bigsmp);
+struct genapic apic_bigsmp = APIC_INIT("bigsmp", probe_bigsmp);
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 1af0cc7..9e835a1 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -1,4 +1,4 @@
-/*
+/*
* Default generic APIC driver. This handles up to 8 CPUs.
*/
#define APIC_DEFINITION 1
@@ -19,8 +19,8 @@
/* should be called last. */
static int probe_default(void)
-{
+{
return 1;
-}
+}
-struct genapic apic_default = APIC_INIT("default", probe_default);
+struct genapic apic_default = APIC_INIT("default", probe_default);
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index f410d3c..c5ae751 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -1,8 +1,9 @@
-/* Copyright 2003 Andi Kleen, SuSE Labs.
- * Subject to the GNU Public License, v.2
- *
+/*
+ * Copyright 2003 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License, v.2
+ *
* Generic x86 APIC driver probe layer.
- */
+ */
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/string.h>
@@ -24,7 +25,7 @@
static struct genapic *apic_probe[] __initdata = {
&apic_summit,
- &apic_bigsmp,
+ &apic_bigsmp,
&apic_es7000,
&apic_default, /* must be last */
NULL,
@@ -69,7 +70,7 @@
}
void __init generic_apic_probe(void)
-{
+{
if (!cmdline_apic) {
int i;
for (i = 0; apic_probe[i]; i++) {
@@ -83,40 +84,40 @@
panic("Didn't find an APIC driver");
}
printk(KERN_INFO "Using APIC driver %s\n", genapic->name);
-}
+}
/* These functions can switch the APIC even after the initial ->probe() */
int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
-{
+{
int i;
- for (i = 0; apic_probe[i]; ++i) {
- if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) {
+ for (i = 0; apic_probe[i]; ++i) {
+ if (apic_probe[i]->mps_oem_check(mpc, oem, productid)) {
if (!cmdline_apic) {
genapic = apic_probe[i];
printk(KERN_INFO "Switched to APIC driver `%s'.\n",
genapic->name);
}
return 1;
- }
- }
+ }
+ }
return 0;
-}
+}
int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
int i;
- for (i = 0; apic_probe[i]; ++i) {
- if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
+ for (i = 0; apic_probe[i]; ++i) {
+ if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
if (!cmdline_apic) {
genapic = apic_probe[i];
printk(KERN_INFO "Switched to APIC driver `%s'.\n",
genapic->name);
}
return 1;
- }
- }
- return 0;
+ }
+ }
+ return 0;
}
int hard_smp_processor_id(void)
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 74883cc..a97ea0f 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -1,4 +1,4 @@
-/*
+/*
* APIC driver for the IBM "Summit" chipset.
*/
#define APIC_DEFINITION 1
@@ -19,9 +19,9 @@
#include <asm/mach-summit/mach_mpparse.h>
static int probe_summit(void)
-{
+{
/* probed later in mptable/ACPI hooks */
return 0;
-}
+}
-struct genapic apic_summit = APIC_INIT("summit", probe_summit);
+struct genapic apic_summit = APIC_INIT("summit", probe_summit);
diff --git a/arch/x86/mach-rdc321x/Makefile b/arch/x86/mach-rdc321x/Makefile
index 1faac81..8325b4c 100644
--- a/arch/x86/mach-rdc321x/Makefile
+++ b/arch/x86/mach-rdc321x/Makefile
@@ -1,5 +1,5 @@
#
# Makefile for the RDC321x specific parts of the kernel
#
-obj-$(CONFIG_X86_RDC321X) := gpio.o platform.o wdt.o
+obj-$(CONFIG_X86_RDC321X) := gpio.o platform.o
diff --git a/arch/x86/mach-rdc321x/wdt.c b/arch/x86/mach-rdc321x/wdt.c
deleted file mode 100644
index ec5625a..0000000
--- a/arch/x86/mach-rdc321x/wdt.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * RDC321x watchdog driver
- *
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- * This driver is highly inspired from the cpu5_wdt driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/timer.h>
-#include <linux/completion.h>
-#include <linux/jiffies.h>
-#include <linux/platform_device.h>
-#include <linux/watchdog.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-
-#include <asm/mach-rdc321x/rdc321x_defs.h>
-
-#define RDC_WDT_MASK 0x80000000 /* Mask */
-#define RDC_WDT_EN 0x00800000 /* Enable bit */
-#define RDC_WDT_WTI 0x00200000 /* Generate CPU reset/NMI/WDT on timeout */
-#define RDC_WDT_RST 0x00100000 /* Reset bit */
-#define RDC_WDT_WIF 0x00040000 /* WDT IRQ Flag */
-#define RDC_WDT_IRT 0x00000100 /* IRQ Routing table */
-#define RDC_WDT_CNT 0x00000001 /* WDT count */
-
-#define RDC_CLS_TMR 0x80003844 /* Clear timer */
-
-#define RDC_WDT_INTERVAL (HZ/10+1)
-
-int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-static int ticks = 1000;
-
-/* some device data */
-
-static struct {
- struct completion stop;
- volatile int running;
- struct timer_list timer;
- volatile int queue;
- int default_ticks;
- unsigned long inuse;
-} rdc321x_wdt_device;
-
-/* generic helper functions */
-
-static void rdc321x_wdt_trigger(unsigned long unused)
-{
- if (rdc321x_wdt_device.running)
- ticks--;
-
- /* keep watchdog alive */
- outl(RDC_WDT_EN|inl(RDC3210_CFGREG_DATA), RDC3210_CFGREG_DATA);
-
- /* requeue?? */
- if (rdc321x_wdt_device.queue && ticks)
- mod_timer(&rdc321x_wdt_device.timer,
- jiffies + RDC_WDT_INTERVAL);
- else {
- /* ticks doesn't matter anyway */
- complete(&rdc321x_wdt_device.stop);
- }
-
-}
-
-static void rdc321x_wdt_reset(void)
-{
- ticks = rdc321x_wdt_device.default_ticks;
-}
-
-static void rdc321x_wdt_start(void)
-{
- if (!rdc321x_wdt_device.queue) {
- rdc321x_wdt_device.queue = 1;
-
- /* Clear the timer */
- outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
-
- /* Enable watchdog and set the timeout to 81.92 us */
- outl(RDC_WDT_EN|RDC_WDT_CNT, RDC3210_CFGREG_DATA);
-
- mod_timer(&rdc321x_wdt_device.timer,
- jiffies + RDC_WDT_INTERVAL);
- }
-
- /* if process dies, counter is not decremented */
- rdc321x_wdt_device.running++;
-}
-
-static int rdc321x_wdt_stop(void)
-{
- if (rdc321x_wdt_device.running)
- rdc321x_wdt_device.running = 0;
-
- ticks = rdc321x_wdt_device.default_ticks;
-
- return -EIO;
-}
-
-/* filesystem operations */
-
-static int rdc321x_wdt_open(struct inode *inode, struct file *file)
-{
- if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
- return -EBUSY;
-
- return nonseekable_open(inode, file);
-}
-
-static int rdc321x_wdt_release(struct inode *inode, struct file *file)
-{
- clear_bit(0, &rdc321x_wdt_device.inuse);
- return 0;
-}
-
-static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- void __user *argp = (void __user *)arg;
- unsigned int value;
- static struct watchdog_info ident = {
- .options = WDIOF_CARDRESET,
- .identity = "RDC321x WDT",
- };
-
- switch (cmd) {
- case WDIOC_KEEPALIVE:
- rdc321x_wdt_reset();
- break;
- case WDIOC_GETSTATUS:
- /* Read the value from the DATA register */
- value = inl(RDC3210_CFGREG_DATA);
- if (copy_to_user(argp, &value, sizeof(int)))
- return -EFAULT;
- break;
- case WDIOC_GETSUPPORT:
- if (copy_to_user(argp, &ident, sizeof(ident)))
- return -EFAULT;
- break;
- case WDIOC_SETOPTIONS:
- if (copy_from_user(&value, argp, sizeof(int)))
- return -EFAULT;
- switch (value) {
- case WDIOS_ENABLECARD:
- rdc321x_wdt_start();
- break;
- case WDIOS_DISABLECARD:
- return rdc321x_wdt_stop();
- default:
- return -EINVAL;
- }
- break;
- default:
- return -ENOTTY;
- }
- return 0;
-}
-
-static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- if (!count)
- return -EIO;
-
- rdc321x_wdt_reset();
-
- return count;
-}
-
-static const struct file_operations rdc321x_wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .ioctl = rdc321x_wdt_ioctl,
- .open = rdc321x_wdt_open,
- .write = rdc321x_wdt_write,
- .release = rdc321x_wdt_release,
-};
-
-static struct miscdevice rdc321x_wdt_misc = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &rdc321x_wdt_fops,
-};
-
-static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
-{
- int err;
-
- err = misc_register(&rdc321x_wdt_misc);
- if (err < 0) {
- printk(KERN_ERR PFX "watchdog misc_register failed\n");
- return err;
- }
-
- /* Reset the watchdog */
- outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
-
- init_completion(&rdc321x_wdt_device.stop);
- rdc321x_wdt_device.queue = 0;
-
- clear_bit(0, &rdc321x_wdt_device.inuse);
-
- setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
-
- rdc321x_wdt_device.default_ticks = ticks;
-
- printk(KERN_INFO PFX "watchdog init success\n");
-
- return 0;
-}
-
-static int rdc321x_wdt_remove(struct platform_device *pdev)
-{
- if (rdc321x_wdt_device.queue) {
- rdc321x_wdt_device.queue = 0;
- wait_for_completion(&rdc321x_wdt_device.stop);
- }
-
- misc_deregister(&rdc321x_wdt_misc);
-
- return 0;
-}
-
-static struct platform_driver rdc321x_wdt_driver = {
- .probe = rdc321x_wdt_probe,
- .remove = rdc321x_wdt_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = "rdc321x-wdt",
- },
-};
-
-static int __init rdc321x_wdt_init(void)
-{
- return platform_driver_register(&rdc321x_wdt_driver);
-}
-
-static void __exit rdc321x_wdt_exit(void)
-{
- platform_driver_unregister(&rdc321x_wdt_driver);
-}
-
-module_init(rdc321x_wdt_init);
-module_exit(rdc321x_wdt_exit);
-
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("RDC321x watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 3cc8eb2..be7235b 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -27,6 +27,7 @@
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/arch_hooks.h>
+#include <asm/trampoline.h>
/* TLB state -- visible externally, indexed physically */
DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { &init_mm, 0 };
@@ -210,7 +211,7 @@
/* steal a page from the bottom of memory for the trampoline and
* squirrel its address away here. This will be in kernel virtual
* space */
-static __u32 trampoline_base;
+unsigned char *trampoline_base;
/* The per cpu profile stuff - used in smp_local_timer_interrupt */
static DEFINE_PER_CPU(int, prof_multiplier) = 1;
@@ -429,15 +430,15 @@
}
/* set up the trampoline and return the physical address of the code */
-static __u32 __init setup_trampoline(void)
+unsigned long __init setup_trampoline(void)
{
/* these two are global symbols in trampoline.S */
extern const __u8 trampoline_end[];
extern const __u8 trampoline_data[];
- memcpy((__u8 *) trampoline_base, trampoline_data,
+ memcpy(trampoline_base, trampoline_data,
trampoline_end - trampoline_data);
- return virt_to_phys((__u8 *) trampoline_base);
+ return virt_to_phys(trampoline_base);
}
/* Routine initially called when a non-boot CPU is brought online */
@@ -520,13 +521,6 @@
& ~(voyager_extended_vic_processors
& voyager_allowed_boot_processors);
- /* This is an area in head.S which was used to set up the
- * initial kernel stack. We need to alter this to give the
- * booting CPU a new stack (taken from its idle process) */
- extern struct {
- __u8 *sp;
- unsigned short ss;
- } stack_start;
/* This is the format of the CPI IDT gate (in real mode) which
* we're hijacking to boot the CPU */
union IDTFormat {
@@ -1166,7 +1160,7 @@
* is sorted out */
void __init smp_alloc_memory(void)
{
- trampoline_base = (__u32) alloc_bootmem_low_pages(PAGE_SIZE);
+ trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
if (__pa(trampoline_base) >= 0x93000)
BUG();
}
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 760baee..4bab3b1 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -276,6 +276,7 @@
entry_sel_off.offset = FPU_ORIG_EIP;
entry_sel_off.selector = FPU_CS;
entry_sel_off.opcode = (byte1 << 8) | FPU_modrm;
+ entry_sel_off.empty = 0;
FPU_rm = FPU_modrm & 7;
diff --git a/arch/x86/math-emu/reg_ld_str.c b/arch/x86/math-emu/reg_ld_str.c
index 799d4af..02af772 100644
--- a/arch/x86/math-emu/reg_ld_str.c
+++ b/arch/x86/math-emu/reg_ld_str.c
@@ -383,15 +383,15 @@
int exp;
FPU_REG tmp;
+ l[0] = 0;
+ l[1] = 0;
if (st0_tag == TAG_Valid) {
reg_copy(st0_ptr, &tmp);
exp = exponent(&tmp);
if (exp < DOUBLE_Emin) { /* It may be a denormal */
addexponent(&tmp, -DOUBLE_Emin + 52); /* largest exp to be 51 */
-
- denormal_arg:
-
+denormal_arg:
if ((precision_loss = FPU_round_to_int(&tmp, st0_tag))) {
#ifdef PECULIAR_486
/* Did it round to a non-denormal ? */
@@ -477,8 +477,7 @@
/* This is a special case: see sec 16.2.5.1 of the 80486 book */
/* Overflow to infinity */
- l[0] = 0x00000000; /* Set to */
- l[1] = 0x7ff00000; /* + INF */
+ l[1] = 0x7ff00000; /* Set to + INF */
} else {
if (precision_loss) {
if (increment)
@@ -492,8 +491,6 @@
}
} else if (st0_tag == TAG_Zero) {
/* Number is zero */
- l[0] = 0;
- l[1] = 0;
} else if (st0_tag == TAG_Special) {
st0_tag = FPU_Special(st0_ptr);
if (st0_tag == TW_Denormal) {
@@ -508,7 +505,6 @@
reg_copy(st0_ptr, &tmp);
goto denormal_arg;
} else if (st0_tag == TW_Infinity) {
- l[0] = 0;
l[1] = 0x7ff00000;
} else if (st0_tag == TW_NaN) {
/* Is it really a NaN ? */
@@ -532,7 +528,6 @@
EXCEPTION(EX_Invalid);
if (!(control_word & CW_Invalid))
return 0;
- l[0] = 0;
l[1] = 0xfff80000;
}
}
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 9832910..20941d2 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,5 +1,17 @@
+obj-y := init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
+ pat.o
+
+obj-$(CONFIG_X86_32) += pgtable_32.o
+
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_X86_PTDUMP) += dump_pagetables.o
+
+obj-$(CONFIG_HIGHMEM) += highmem_32.o
+
ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/mm/Makefile_32
+obj-$(CONFIG_NUMA) += discontig_32.o
else
-include ${srctree}/arch/x86/mm/Makefile_64
+obj-$(CONFIG_NUMA) += numa_64.o
+obj-$(CONFIG_K8_NUMA) += k8topology_64.o
+obj-$(CONFIG_ACPI_NUMA) += srat_64.o
endif
diff --git a/arch/x86/mm/Makefile_32 b/arch/x86/mm/Makefile_32
deleted file mode 100644
index c36ae88..0000000
--- a/arch/x86/mm/Makefile_32
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux i386-specific parts of the memory manager.
-#
-
-obj-y := init_32.o pgtable_32.o fault.o ioremap.o extable.o pageattr.o mmap.o
-
-obj-$(CONFIG_NUMA) += discontig_32.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_HIGHMEM) += highmem_32.o
diff --git a/arch/x86/mm/Makefile_64 b/arch/x86/mm/Makefile_64
deleted file mode 100644
index 688c8c2..0000000
--- a/arch/x86/mm/Makefile_64
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux x86_64-specific parts of the memory manager.
-#
-
-obj-y := init_64.o fault.o ioremap.o extable.o pageattr.o mmap.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_NUMA) += numa_64.o
-obj-$(CONFIG_K8_NUMA) += k8topology_64.o
-obj-$(CONFIG_ACPI_NUMA) += srat_64.o
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index 8e25e06..eba0bbe 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -37,7 +37,7 @@
#include <asm/e820.h>
#include <asm/setup.h>
#include <asm/mmzone.h>
-#include <bios_ebda.h>
+#include <asm/bios_ebda.h>
struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
EXPORT_SYMBOL(node_data);
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
new file mode 100644
index 0000000..6791b83
--- /dev/null
+++ b/arch/x86/mm/dump_pagetables.c
@@ -0,0 +1,354 @@
+/*
+ * Debug helper to dump the current kernel pagetables of the system
+ * so that we can see what the various memory ranges are set to.
+ *
+ * (C) Copyright 2008 Intel Corporation
+ *
+ * Author: Arjan van de Ven <arjan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+
+#include <asm/pgtable.h>
+
+/*
+ * The dumper groups pagetable entries of the same type into one, and for
+ * that it needs to keep some state when walking, and flush this state
+ * when a "break" in the continuity is found.
+ */
+struct pg_state {
+ int level;
+ pgprot_t current_prot;
+ unsigned long start_address;
+ unsigned long current_address;
+ const struct addr_marker *marker;
+};
+
+struct addr_marker {
+ unsigned long start_address;
+ const char *name;
+};
+
+/* Address space markers hints */
+static struct addr_marker address_markers[] = {
+ { 0, "User Space" },
+#ifdef CONFIG_X86_64
+ { 0x8000000000000000UL, "Kernel Space" },
+ { 0xffff810000000000UL, "Low Kernel Mapping" },
+ { VMALLOC_START, "vmalloc() Area" },
+ { VMEMMAP_START, "Vmemmap" },
+ { __START_KERNEL_map, "High Kernel Mapping" },
+ { MODULES_VADDR, "Modules" },
+ { MODULES_END, "End Modules" },
+#else
+ { PAGE_OFFSET, "Kernel Mapping" },
+ { 0/* VMALLOC_START */, "vmalloc() Area" },
+ { 0/*VMALLOC_END*/, "vmalloc() End" },
+# ifdef CONFIG_HIGHMEM
+ { 0/*PKMAP_BASE*/, "Persisent kmap() Area" },
+# endif
+ { 0/*FIXADDR_START*/, "Fixmap Area" },
+#endif
+ { -1, NULL } /* End of list */
+};
+
+/* Multipliers for offsets within the PTEs */
+#define PTE_LEVEL_MULT (PAGE_SIZE)
+#define PMD_LEVEL_MULT (PTRS_PER_PTE * PTE_LEVEL_MULT)
+#define PUD_LEVEL_MULT (PTRS_PER_PMD * PMD_LEVEL_MULT)
+#define PGD_LEVEL_MULT (PTRS_PER_PUD * PUD_LEVEL_MULT)
+
+/*
+ * Print a readable form of a pgprot_t to the seq_file
+ */
+static void printk_prot(struct seq_file *m, pgprot_t prot, int level)
+{
+ pgprotval_t pr = pgprot_val(prot);
+ static const char * const level_name[] =
+ { "cr3", "pgd", "pud", "pmd", "pte" };
+
+ if (!pgprot_val(prot)) {
+ /* Not present */
+ seq_printf(m, " ");
+ } else {
+ if (pr & _PAGE_USER)
+ seq_printf(m, "USR ");
+ else
+ seq_printf(m, " ");
+ if (pr & _PAGE_RW)
+ seq_printf(m, "RW ");
+ else
+ seq_printf(m, "ro ");
+ if (pr & _PAGE_PWT)
+ seq_printf(m, "PWT ");
+ else
+ seq_printf(m, " ");
+ if (pr & _PAGE_PCD)
+ seq_printf(m, "PCD ");
+ else
+ seq_printf(m, " ");
+
+ /* Bit 9 has a different meaning on level 3 vs 4 */
+ if (level <= 3) {
+ if (pr & _PAGE_PSE)
+ seq_printf(m, "PSE ");
+ else
+ seq_printf(m, " ");
+ } else {
+ if (pr & _PAGE_PAT)
+ seq_printf(m, "pat ");
+ else
+ seq_printf(m, " ");
+ }
+ if (pr & _PAGE_GLOBAL)
+ seq_printf(m, "GLB ");
+ else
+ seq_printf(m, " ");
+ if (pr & _PAGE_NX)
+ seq_printf(m, "NX ");
+ else
+ seq_printf(m, "x ");
+ }
+ seq_printf(m, "%s\n", level_name[level]);
+}
+
+/*
+ * On 64 bits, sign-extend the 48 bit address to 64 bit
+ */
+static unsigned long normalize_addr(unsigned long u)
+{
+#ifdef CONFIG_X86_64
+ return (signed long)(u << 16) >> 16;
+#else
+ return u;
+#endif
+}
+
+/*
+ * This function gets called on a break in a continuous series
+ * of PTE entries; the next one is different so we need to
+ * print what we collected so far.
+ */
+static void note_page(struct seq_file *m, struct pg_state *st,
+ pgprot_t new_prot, int level)
+{
+ pgprotval_t prot, cur;
+ static const char units[] = "KMGTPE";
+
+ /*
+ * If we have a "break" in the series, we need to flush the state that
+ * we have now. "break" is either changing perms, levels or
+ * address space marker.
+ */
+ prot = pgprot_val(new_prot) & ~(PTE_MASK);
+ cur = pgprot_val(st->current_prot) & ~(PTE_MASK);
+
+ if (!st->level) {
+ /* First entry */
+ st->current_prot = new_prot;
+ st->level = level;
+ st->marker = address_markers;
+ seq_printf(m, "---[ %s ]---\n", st->marker->name);
+ } else if (prot != cur || level != st->level ||
+ st->current_address >= st->marker[1].start_address) {
+ const char *unit = units;
+ unsigned long delta;
+
+ /*
+ * Now print the actual finished series
+ */
+ seq_printf(m, "0x%p-0x%p ",
+ (void *)st->start_address,
+ (void *)st->current_address);
+
+ delta = (st->current_address - st->start_address) >> 10;
+ while (!(delta & 1023) && unit[1]) {
+ delta >>= 10;
+ unit++;
+ }
+ seq_printf(m, "%9lu%c ", delta, *unit);
+ printk_prot(m, st->current_prot, st->level);
+
+ /*
+ * We print markers for special areas of address space,
+ * such as the start of vmalloc space etc.
+ * This helps in the interpretation.
+ */
+ if (st->current_address >= st->marker[1].start_address) {
+ st->marker++;
+ seq_printf(m, "---[ %s ]---\n", st->marker->name);
+ }
+
+ st->start_address = st->current_address;
+ st->current_prot = new_prot;
+ st->level = level;
+ }
+}
+
+static void walk_pte_level(struct seq_file *m, struct pg_state *st, pmd_t addr,
+ unsigned long P)
+{
+ int i;
+ pte_t *start;
+
+ start = (pte_t *) pmd_page_vaddr(addr);
+ for (i = 0; i < PTRS_PER_PTE; i++) {
+ pgprot_t prot = pte_pgprot(*start);
+
+ st->current_address = normalize_addr(P + i * PTE_LEVEL_MULT);
+ note_page(m, st, prot, 4);
+ start++;
+ }
+}
+
+#if PTRS_PER_PMD > 1
+
+static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
+ unsigned long P)
+{
+ int i;
+ pmd_t *start;
+
+ start = (pmd_t *) pud_page_vaddr(addr);
+ for (i = 0; i < PTRS_PER_PMD; i++) {
+ st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
+ if (!pmd_none(*start)) {
+ pgprotval_t prot = pmd_val(*start) & ~PTE_MASK;
+
+ if (pmd_large(*start) || !pmd_present(*start))
+ note_page(m, st, __pgprot(prot), 3);
+ else
+ walk_pte_level(m, st, *start,
+ P + i * PMD_LEVEL_MULT);
+ } else
+ note_page(m, st, __pgprot(0), 3);
+ start++;
+ }
+}
+
+#else
+#define walk_pmd_level(m,s,a,p) walk_pte_level(m,s,__pmd(pud_val(a)),p)
+#define pud_large(a) pmd_large(__pmd(pud_val(a)))
+#define pud_none(a) pmd_none(__pmd(pud_val(a)))
+#endif
+
+#if PTRS_PER_PUD > 1
+
+static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
+ unsigned long P)
+{
+ int i;
+ pud_t *start;
+
+ start = (pud_t *) pgd_page_vaddr(addr);
+
+ for (i = 0; i < PTRS_PER_PUD; i++) {
+ st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
+ if (!pud_none(*start)) {
+ pgprotval_t prot = pud_val(*start) & ~PTE_MASK;
+
+ if (pud_large(*start) || !pud_present(*start))
+ note_page(m, st, __pgprot(prot), 2);
+ else
+ walk_pmd_level(m, st, *start,
+ P + i * PUD_LEVEL_MULT);
+ } else
+ note_page(m, st, __pgprot(0), 2);
+
+ start++;
+ }
+}
+
+#else
+#define walk_pud_level(m,s,a,p) walk_pmd_level(m,s,__pud(pgd_val(a)),p)
+#define pgd_large(a) pud_large(__pud(pgd_val(a)))
+#define pgd_none(a) pud_none(__pud(pgd_val(a)))
+#endif
+
+static void walk_pgd_level(struct seq_file *m)
+{
+#ifdef CONFIG_X86_64
+ pgd_t *start = (pgd_t *) &init_level4_pgt;
+#else
+ pgd_t *start = swapper_pg_dir;
+#endif
+ int i;
+ struct pg_state st;
+
+ memset(&st, 0, sizeof(st));
+
+ for (i = 0; i < PTRS_PER_PGD; i++) {
+ st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
+ if (!pgd_none(*start)) {
+ pgprotval_t prot = pgd_val(*start) & ~PTE_MASK;
+
+ if (pgd_large(*start) || !pgd_present(*start))
+ note_page(m, &st, __pgprot(prot), 1);
+ else
+ walk_pud_level(m, &st, *start,
+ i * PGD_LEVEL_MULT);
+ } else
+ note_page(m, &st, __pgprot(0), 1);
+
+ start++;
+ }
+
+ /* Flush out the last page */
+ st.current_address = normalize_addr(PTRS_PER_PGD*PGD_LEVEL_MULT);
+ note_page(m, &st, __pgprot(0), 0);
+}
+
+static int ptdump_show(struct seq_file *m, void *v)
+{
+ walk_pgd_level(m);
+ return 0;
+}
+
+static int ptdump_open(struct inode *inode, struct file *filp)
+{
+ return single_open(filp, ptdump_show, NULL);
+}
+
+static const struct file_operations ptdump_fops = {
+ .open = ptdump_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+int pt_dump_init(void)
+{
+ struct dentry *pe;
+
+#ifdef CONFIG_X86_32
+ /* Not a compile-time constant on x86-32 */
+ address_markers[2].start_address = VMALLOC_START;
+ address_markers[3].start_address = VMALLOC_END;
+# ifdef CONFIG_HIGHMEM
+ address_markers[4].start_address = PKMAP_BASE;
+ address_markers[5].start_address = FIXADDR_START;
+# else
+ address_markers[4].start_address = FIXADDR_START;
+# endif
+#endif
+
+ pe = debugfs_create_file("kernel_page_tables", 0600, NULL, NULL,
+ &ptdump_fops);
+ if (!pe)
+ return -ENOMEM;
+
+ return 0;
+}
+
+__initcall(pt_dump_init);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arjan van de Ven <arjan@linux.intel.com>");
+MODULE_DESCRIPTION("Kernel debugging helper that dumps pagetables");
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index ec08d83..fd7e179 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -639,7 +639,7 @@
#ifdef CONFIG_X86_32
/* It's safe to allow irq's after cr2 has been saved and the vmalloc
fault has been handled. */
- if (regs->flags & (X86_EFLAGS_IF|VM_MASK))
+ if (regs->flags & (X86_EFLAGS_IF | X86_VM_MASK))
local_irq_enable();
/*
@@ -976,9 +976,5 @@
if (address == start)
start = address + PGDIR_SIZE;
}
- /* Check that there is no need to do the same for the modules area. */
- BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
- BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
- (__START_KERNEL & PGDIR_MASK)));
#endif
}
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index ee1091a..1500dc8 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -51,6 +51,8 @@
unsigned int __VMALLOC_RESERVE = 128 << 20;
+unsigned long max_pfn_mapped;
+
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
unsigned long highstart_pfn, highend_pfn;
@@ -179,8 +181,13 @@
/*
* Map with big pages if possible, otherwise
* create normal page tables:
+ *
+ * Don't use a large page for the first 2/4MB of memory
+ * because there are often fixed size MTRRs in there
+ * and overlapping MTRRs into large pages can cause
+ * slowdowns.
*/
- if (cpu_has_pse) {
+ if (cpu_has_pse && !(pgd_idx == 0 && pmd_idx == 0)) {
unsigned int addr2;
pgprot_t prot = PAGE_KERNEL_LARGE;
@@ -194,6 +201,7 @@
set_pmd(pmd, pfn_pmd(pfn, prot));
pfn += PTRS_PER_PTE;
+ max_pfn_mapped = pfn;
continue;
}
pte = one_page_table_init(pmd);
@@ -208,6 +216,7 @@
set_pte(pte, pfn_pte(pfn, prot));
}
+ max_pfn_mapped = pfn;
}
}
}
@@ -723,25 +732,17 @@
unsigned long start = PFN_ALIGN(_text);
unsigned long size = PFN_ALIGN(_etext) - start;
-#ifndef CONFIG_KPROBES
-#ifdef CONFIG_HOTPLUG_CPU
- /* It must still be possible to apply SMP alternatives. */
- if (num_possible_cpus() <= 1)
-#endif
- {
- set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
- printk(KERN_INFO "Write protecting the kernel text: %luk\n",
- size >> 10);
+ set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
+ printk(KERN_INFO "Write protecting the kernel text: %luk\n",
+ size >> 10);
#ifdef CONFIG_CPA_DEBUG
- printk(KERN_INFO "Testing CPA: Reverting %lx-%lx\n",
- start, start+size);
- set_pages_rw(virt_to_page(start), size>>PAGE_SHIFT);
+ printk(KERN_INFO "Testing CPA: Reverting %lx-%lx\n",
+ start, start+size);
+ set_pages_rw(virt_to_page(start), size>>PAGE_SHIFT);
- printk(KERN_INFO "Testing CPA: write protecting again\n");
- set_pages_ro(virt_to_page(start), size>>PAGE_SHIFT);
-#endif
- }
+ printk(KERN_INFO "Testing CPA: write protecting again\n");
+ set_pages_ro(virt_to_page(start), size>>PAGE_SHIFT);
#endif
start += size;
size = (unsigned long)__end_rodata - start;
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index a02a14f..1076097 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -54,6 +54,26 @@
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+int direct_gbpages __meminitdata
+#ifdef CONFIG_DIRECT_GBPAGES
+ = 1
+#endif
+;
+
+static int __init parse_direct_gbpages_off(char *arg)
+{
+ direct_gbpages = 0;
+ return 0;
+}
+early_param("nogbpages", parse_direct_gbpages_off);
+
+static int __init parse_direct_gbpages_on(char *arg)
+{
+ direct_gbpages = 1;
+ return 0;
+}
+early_param("gbpages", parse_direct_gbpages_on);
+
/*
* NOTE: pagetable_init alloc all the fixmap pagetables contiguous on the
* physical space so we can cache the place of the first one and move
@@ -69,9 +89,6 @@
printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk(KERN_INFO "Free swap: %6ldkB\n",
- nr_swap_pages << (PAGE_SHIFT-10));
-
for_each_online_pgdat(pgdat) {
for (i = 0; i < pgdat->node_spanned_pages; ++i) {
/*
@@ -296,7 +313,7 @@
__flush_tlb_all();
}
-static void __meminit
+static unsigned long __meminit
phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end)
{
int i = pmd_index(address);
@@ -318,21 +335,26 @@
set_pte((pte_t *)pmd,
pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
}
+ return address;
}
-static void __meminit
+static unsigned long __meminit
phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end)
{
pmd_t *pmd = pmd_offset(pud, 0);
+ unsigned long last_map_addr;
+
spin_lock(&init_mm.page_table_lock);
- phys_pmd_init(pmd, address, end);
+ last_map_addr = phys_pmd_init(pmd, address, end);
spin_unlock(&init_mm.page_table_lock);
__flush_tlb_all();
+ return last_map_addr;
}
-static void __meminit
+static unsigned long __meminit
phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end)
{
+ unsigned long last_map_addr = end;
int i = pud_index(addr);
for (; i < PTRS_PER_PUD; i++, addr = (addr & PUD_MASK) + PUD_SIZE) {
@@ -350,7 +372,15 @@
}
if (pud_val(*pud)) {
- phys_pmd_update(pud, addr, end);
+ if (!pud_large(*pud))
+ last_map_addr = phys_pmd_update(pud, addr, end);
+ continue;
+ }
+
+ if (direct_gbpages) {
+ set_pte((pte_t *)pud,
+ pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+ last_map_addr = (addr & PUD_MASK) + PUD_SIZE;
continue;
}
@@ -358,12 +388,14 @@
spin_lock(&init_mm.page_table_lock);
set_pud(pud, __pud(pmd_phys | _KERNPG_TABLE));
- phys_pmd_init(pmd, addr, end);
+ last_map_addr = phys_pmd_init(pmd, addr, end);
spin_unlock(&init_mm.page_table_lock);
unmap_low_page(pmd);
}
__flush_tlb_all();
+
+ return last_map_addr >> PAGE_SHIFT;
}
static void __init find_early_table_space(unsigned long end)
@@ -371,9 +403,11 @@
unsigned long puds, pmds, tables, start;
puds = (end + PUD_SIZE - 1) >> PUD_SHIFT;
- pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
- tables = round_up(puds * sizeof(pud_t), PAGE_SIZE) +
- round_up(pmds * sizeof(pmd_t), PAGE_SIZE);
+ tables = round_up(puds * sizeof(pud_t), PAGE_SIZE);
+ if (!direct_gbpages) {
+ pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
+ tables += round_up(pmds * sizeof(pmd_t), PAGE_SIZE);
+ }
/*
* RED-PEN putting page tables only on node 0 could
@@ -393,16 +427,135 @@
(table_start << PAGE_SHIFT) + tables);
}
+static void __init init_gbpages(void)
+{
+ if (direct_gbpages && cpu_has_gbpages)
+ printk(KERN_INFO "Using GB pages for direct mapping\n");
+ else
+ direct_gbpages = 0;
+}
+
+#ifdef CONFIG_MEMTEST_BOOTPARAM
+
+static void __init memtest(unsigned long start_phys, unsigned long size,
+ unsigned pattern)
+{
+ unsigned long i;
+ unsigned long *start;
+ unsigned long start_bad;
+ unsigned long last_bad;
+ unsigned long val;
+ unsigned long start_phys_aligned;
+ unsigned long count;
+ unsigned long incr;
+
+ switch (pattern) {
+ case 0:
+ val = 0UL;
+ break;
+ case 1:
+ val = -1UL;
+ break;
+ case 2:
+ val = 0x5555555555555555UL;
+ break;
+ case 3:
+ val = 0xaaaaaaaaaaaaaaaaUL;
+ break;
+ default:
+ return;
+ }
+
+ incr = sizeof(unsigned long);
+ start_phys_aligned = ALIGN(start_phys, incr);
+ count = (size - (start_phys_aligned - start_phys))/incr;
+ start = __va(start_phys_aligned);
+ start_bad = 0;
+ last_bad = 0;
+
+ for (i = 0; i < count; i++)
+ start[i] = val;
+ for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
+ if (*start != val) {
+ if (start_phys_aligned == last_bad + incr) {
+ last_bad += incr;
+ } else {
+ if (start_bad) {
+ printk(KERN_CONT "\n %016lx bad mem addr %016lx - %016lx reserved",
+ val, start_bad, last_bad + incr);
+ reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+ }
+ start_bad = last_bad = start_phys_aligned;
+ }
+ }
+ }
+ if (start_bad) {
+ printk(KERN_CONT "\n %016lx bad mem addr %016lx - %016lx reserved",
+ val, start_bad, last_bad + incr);
+ reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+ }
+
+}
+
+static int memtest_pattern __initdata = CONFIG_MEMTEST_BOOTPARAM_VALUE;
+
+static int __init parse_memtest(char *arg)
+{
+ if (arg)
+ memtest_pattern = simple_strtoul(arg, NULL, 0);
+ return 0;
+}
+
+early_param("memtest", parse_memtest);
+
+static void __init early_memtest(unsigned long start, unsigned long end)
+{
+ unsigned long t_start, t_size;
+ unsigned pattern;
+
+ if (!memtest_pattern)
+ return;
+
+ printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
+ for (pattern = 0; pattern < memtest_pattern; pattern++) {
+ t_start = start;
+ t_size = 0;
+ while (t_start < end) {
+ t_start = find_e820_area_size(t_start, &t_size, 1);
+
+ /* done ? */
+ if (t_start >= end)
+ break;
+ if (t_start + t_size > end)
+ t_size = end - t_start;
+
+ printk(KERN_CONT "\n %016lx - %016lx pattern %d",
+ t_start, t_start + t_size, pattern);
+
+ memtest(t_start, t_size, pattern);
+
+ t_start += t_size;
+ }
+ }
+ printk(KERN_CONT "\n");
+}
+#else
+static void __init early_memtest(unsigned long start, unsigned long end)
+{
+}
+#endif
+
/*
* Setup the direct mapping of the physical memory at PAGE_OFFSET.
* This runs before bootmem is initialized and gets pages directly from
* the physical memory. To access them they are temporarily mapped.
*/
-void __init_refok init_memory_mapping(unsigned long start, unsigned long end)
+unsigned long __init_refok init_memory_mapping(unsigned long start, unsigned long end)
{
- unsigned long next;
+ unsigned long next, last_map_addr = end;
+ unsigned long start_phys = start, end_phys = end;
- pr_debug("init_memory_mapping\n");
+ printk(KERN_INFO "init_memory_mapping\n");
/*
* Find space for the kernel direct mapping tables.
@@ -411,8 +564,10 @@
* memory mapped. Unfortunately this is done currently before the
* nodes are discovered.
*/
- if (!after_bootmem)
+ if (!after_bootmem) {
+ init_gbpages();
find_early_table_space(end);
+ }
start = (unsigned long)__va(start);
end = (unsigned long)__va(end);
@@ -430,7 +585,7 @@
next = start + PGDIR_SIZE;
if (next > end)
next = end;
- phys_pud_init(pud, __pa(start), __pa(next));
+ last_map_addr = phys_pud_init(pud, __pa(start), __pa(next));
if (!after_bootmem)
set_pgd(pgd_offset_k(start), mk_kernel_pgd(pud_phys));
unmap_low_page(pud);
@@ -443,6 +598,11 @@
if (!after_bootmem)
reserve_early(table_start << PAGE_SHIFT,
table_end << PAGE_SHIFT, "PGTABLE");
+
+ if (!after_bootmem)
+ early_memtest(start_phys, end_phys);
+
+ return last_map_addr;
}
#ifndef CONFIG_NUMA
@@ -482,11 +642,13 @@
{
struct pglist_data *pgdat = NODE_DATA(nid);
struct zone *zone = pgdat->node_zones + ZONE_NORMAL;
- unsigned long start_pfn = start >> PAGE_SHIFT;
+ unsigned long last_mapped_pfn, start_pfn = start >> PAGE_SHIFT;
unsigned long nr_pages = size >> PAGE_SHIFT;
int ret;
- init_memory_mapping(start, start + size-1);
+ last_mapped_pfn = init_memory_mapping(start, start + size-1);
+ if (last_mapped_pfn > max_pfn_mapped)
+ max_pfn_mapped = last_mapped_pfn;
ret = __add_pages(zone, start_pfn, nr_pages);
WARN_ON(1);
@@ -596,24 +758,7 @@
void mark_rodata_ro(void)
{
- unsigned long start = (unsigned long)_stext, end;
-
-#ifdef CONFIG_HOTPLUG_CPU
- /* It must still be possible to apply SMP alternatives. */
- if (num_possible_cpus() > 1)
- start = (unsigned long)_etext;
-#endif
-
-#ifdef CONFIG_KPROBES
- start = (unsigned long)__start_rodata;
-#endif
-
- end = (unsigned long)__end_rodata;
- start = (start + PAGE_SIZE - 1) & PAGE_MASK;
- end &= PAGE_MASK;
- if (end <= start)
- return;
-
+ unsigned long start = PFN_ALIGN(_stext), end = PFN_ALIGN(__end_rodata);
printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
(end - start) >> 10);
@@ -636,6 +781,7 @@
set_memory_ro(start, (end-start) >> PAGE_SHIFT);
#endif
}
+
#endif
#ifdef CONFIG_BLK_DEV_INITRD
@@ -657,7 +803,7 @@
* This can happen with kdump kernels when accessing
* firmware tables:
*/
- if (pfn < end_pfn_map)
+ if (pfn < max_pfn_mapped)
return;
printk(KERN_ERR "reserve_bootmem: illegal reserve %lx %u\n",
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 794895c..c590fd2 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -19,11 +19,7 @@
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
#include <asm/pgalloc.h>
-
-enum ioremap_mode {
- IOR_MODE_UNCACHED,
- IOR_MODE_CACHED,
-};
+#include <asm/pat.h>
#ifdef CONFIG_X86_64
@@ -35,11 +31,23 @@
}
EXPORT_SYMBOL(__phys_addr);
+static inline int phys_addr_valid(unsigned long addr)
+{
+ return addr < (1UL << boot_cpu_data.x86_phys_bits);
+}
+
+#else
+
+static inline int phys_addr_valid(unsigned long addr)
+{
+ return 1;
+}
+
#endif
int page_is_ram(unsigned long pagenr)
{
- unsigned long addr, end;
+ resource_size_t addr, end;
int i;
/*
@@ -78,19 +86,22 @@
* Fix up the linear direct mapping of the kernel to avoid cache attribute
* conflicts.
*/
-static int ioremap_change_attr(unsigned long vaddr, unsigned long size,
- enum ioremap_mode mode)
+int ioremap_change_attr(unsigned long vaddr, unsigned long size,
+ unsigned long prot_val)
{
unsigned long nrpages = size >> PAGE_SHIFT;
int err;
- switch (mode) {
- case IOR_MODE_UNCACHED:
+ switch (prot_val) {
+ case _PAGE_CACHE_UC:
default:
- err = set_memory_uc(vaddr, nrpages);
+ err = _set_memory_uc(vaddr, nrpages);
break;
- case IOR_MODE_CACHED:
- err = set_memory_wb(vaddr, nrpages);
+ case _PAGE_CACHE_WC:
+ err = _set_memory_wc(vaddr, nrpages);
+ break;
+ case _PAGE_CACHE_WB:
+ err = _set_memory_wb(vaddr, nrpages);
break;
}
@@ -107,17 +118,27 @@
* caller shouldn't need to know that small detail.
*/
static void __iomem *__ioremap(resource_size_t phys_addr, unsigned long size,
- enum ioremap_mode mode)
+ unsigned long prot_val)
{
- unsigned long pfn, offset, last_addr, vaddr;
+ unsigned long pfn, offset, vaddr;
+ resource_size_t last_addr;
struct vm_struct *area;
+ unsigned long new_prot_val;
pgprot_t prot;
+ int retval;
/* Don't allow wraparound or zero size */
last_addr = phys_addr + size - 1;
if (!size || last_addr < phys_addr)
return NULL;
+ if (!phys_addr_valid(phys_addr)) {
+ printk(KERN_WARNING "ioremap: invalid physical address %llx\n",
+ phys_addr);
+ WARN_ON_ONCE(1);
+ return NULL;
+ }
+
/*
* Don't remap the low PCI/ISA area, it's always mapped..
*/
@@ -127,25 +148,14 @@
/*
* Don't allow anybody to remap normal RAM that we're using..
*/
- for (pfn = phys_addr >> PAGE_SHIFT; pfn < max_pfn_mapped &&
- (pfn << PAGE_SHIFT) < last_addr; pfn++) {
- if (page_is_ram(pfn) && pfn_valid(pfn) &&
- !PageReserved(pfn_to_page(pfn)))
- return NULL;
- }
+ for (pfn = phys_addr >> PAGE_SHIFT;
+ (pfn << PAGE_SHIFT) < last_addr; pfn++) {
- switch (mode) {
- case IOR_MODE_UNCACHED:
- default:
- /*
- * FIXME: we will use UC MINUS for now, as video fb drivers
- * depend on it. Upcoming ioremap_wc() will fix this behavior.
- */
- prot = PAGE_KERNEL_UC_MINUS;
- break;
- case IOR_MODE_CACHED:
- prot = PAGE_KERNEL;
- break;
+ int is_ram = page_is_ram(pfn);
+
+ if (is_ram && pfn_valid(pfn) && !PageReserved(pfn_to_page(pfn)))
+ return NULL;
+ WARN_ON_ONCE(is_ram);
}
/*
@@ -155,6 +165,49 @@
phys_addr &= PAGE_MASK;
size = PAGE_ALIGN(last_addr+1) - phys_addr;
+ retval = reserve_memtype(phys_addr, phys_addr + size,
+ prot_val, &new_prot_val);
+ if (retval) {
+ pr_debug("Warning: reserve_memtype returned %d\n", retval);
+ return NULL;
+ }
+
+ if (prot_val != new_prot_val) {
+ /*
+ * Do not fallback to certain memory types with certain
+ * requested type:
+ * - request is uncached, return cannot be write-back
+ * - request is uncached, return cannot be write-combine
+ * - request is write-combine, return cannot be write-back
+ */
+ if ((prot_val == _PAGE_CACHE_UC &&
+ (new_prot_val == _PAGE_CACHE_WB ||
+ new_prot_val == _PAGE_CACHE_WC)) ||
+ (prot_val == _PAGE_CACHE_WC &&
+ new_prot_val == _PAGE_CACHE_WB)) {
+ pr_debug(
+ "ioremap error for 0x%llx-0x%llx, requested 0x%lx, got 0x%lx\n",
+ phys_addr, phys_addr + size,
+ prot_val, new_prot_val);
+ free_memtype(phys_addr, phys_addr + size);
+ return NULL;
+ }
+ prot_val = new_prot_val;
+ }
+
+ switch (prot_val) {
+ case _PAGE_CACHE_UC:
+ default:
+ prot = PAGE_KERNEL_NOCACHE;
+ break;
+ case _PAGE_CACHE_WC:
+ prot = PAGE_KERNEL_WC;
+ break;
+ case _PAGE_CACHE_WB:
+ prot = PAGE_KERNEL;
+ break;
+ }
+
/*
* Ok, go for it..
*/
@@ -164,11 +217,13 @@
area->phys_addr = phys_addr;
vaddr = (unsigned long) area->addr;
if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
+ free_memtype(phys_addr, phys_addr + size);
free_vm_area(area);
return NULL;
}
- if (ioremap_change_attr(vaddr, size, mode) < 0) {
+ if (ioremap_change_attr(vaddr, size, prot_val) < 0) {
+ free_memtype(phys_addr, phys_addr + size);
vunmap(area->addr);
return NULL;
}
@@ -199,13 +254,32 @@
*/
void __iomem *ioremap_nocache(resource_size_t phys_addr, unsigned long size)
{
- return __ioremap(phys_addr, size, IOR_MODE_UNCACHED);
+ return __ioremap(phys_addr, size, _PAGE_CACHE_UC);
}
EXPORT_SYMBOL(ioremap_nocache);
+/**
+ * ioremap_wc - map memory into CPU space write combined
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * This version of ioremap ensures that the memory is marked write combining.
+ * Write combining allows faster writes to some hardware devices.
+ *
+ * Must be freed with iounmap.
+ */
+void __iomem *ioremap_wc(unsigned long phys_addr, unsigned long size)
+{
+ if (pat_wc_enabled)
+ return __ioremap(phys_addr, size, _PAGE_CACHE_WC);
+ else
+ return ioremap_nocache(phys_addr, size);
+}
+EXPORT_SYMBOL(ioremap_wc);
+
void __iomem *ioremap_cache(resource_size_t phys_addr, unsigned long size)
{
- return __ioremap(phys_addr, size, IOR_MODE_CACHED);
+ return __ioremap(phys_addr, size, _PAGE_CACHE_WB);
}
EXPORT_SYMBOL(ioremap_cache);
@@ -252,6 +326,8 @@
return;
}
+ free_memtype(p->phys_addr, p->phys_addr + get_vm_area_size(p));
+
/* Finally remove it */
o = remove_vm_area((void *)addr);
BUG_ON(p != o || o == NULL);
@@ -272,8 +348,8 @@
early_param("early_ioremap_debug", early_ioremap_debug_setup);
static __initdata int after_paging_init;
-static __initdata pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)]
- __attribute__((aligned(PAGE_SIZE)));
+static pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)]
+ __section(.bss.page_aligned);
static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
{
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 16b82ad..2ea56f4 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -31,13 +31,15 @@
struct memnode memnode;
+#ifdef CONFIG_SMP
int x86_cpu_to_node_map_init[NR_CPUS] = {
[0 ... NR_CPUS-1] = NUMA_NO_NODE
};
void *x86_cpu_to_node_map_early_ptr;
+EXPORT_SYMBOL(x86_cpu_to_node_map_early_ptr);
+#endif
DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE;
EXPORT_PER_CPU_SYMBOL(x86_cpu_to_node_map);
-EXPORT_SYMBOL(x86_cpu_to_node_map_early_ptr);
s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
[0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
@@ -548,8 +550,6 @@
{
int *cpu_to_node_map = x86_cpu_to_node_map_early_ptr;
- cpu_pda(cpu)->nodenumber = node;
-
if(cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else if(per_cpu_offset(cpu))
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 7b79f6b..7d9517a 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -9,6 +9,8 @@
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
#include <asm/e820.h>
#include <asm/processor.h>
@@ -17,6 +19,7 @@
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/proto.h>
+#include <asm/pat.h>
/*
* The current flushing context - we pass it instead of 5 arguments:
@@ -28,6 +31,7 @@
int numpages;
int flushtlb;
unsigned long pfn;
+ unsigned force_split : 1;
};
#ifdef CONFIG_X86_64
@@ -259,6 +263,9 @@
int i, do_split = 1;
unsigned int level;
+ if (cpa->force_split)
+ return 1;
+
spin_lock_irqsave(&pgd_lock, flags);
/*
* Check for races, another CPU might have split this page
@@ -693,7 +700,8 @@
}
static int change_page_attr_set_clr(unsigned long addr, int numpages,
- pgprot_t mask_set, pgprot_t mask_clr)
+ pgprot_t mask_set, pgprot_t mask_clr,
+ int force_split)
{
struct cpa_data cpa;
int ret, cache, checkalias;
@@ -704,7 +712,7 @@
*/
mask_set = canon_pgprot(mask_set);
mask_clr = canon_pgprot(mask_clr);
- if (!pgprot_val(mask_set) && !pgprot_val(mask_clr))
+ if (!pgprot_val(mask_set) && !pgprot_val(mask_clr) && !force_split)
return 0;
/* Ensure we are PAGE_SIZE aligned */
@@ -721,6 +729,7 @@
cpa.mask_set = mask_set;
cpa.mask_clr = mask_clr;
cpa.flushtlb = 0;
+ cpa.force_split = force_split;
/* No alias checking for _NX bit modifications */
checkalias = (pgprot_val(mask_set) | pgprot_val(mask_clr)) != _PAGE_NX;
@@ -759,26 +768,61 @@
static inline int change_page_attr_set(unsigned long addr, int numpages,
pgprot_t mask)
{
- return change_page_attr_set_clr(addr, numpages, mask, __pgprot(0));
+ return change_page_attr_set_clr(addr, numpages, mask, __pgprot(0), 0);
}
static inline int change_page_attr_clear(unsigned long addr, int numpages,
pgprot_t mask)
{
- return change_page_attr_set_clr(addr, numpages, __pgprot(0), mask);
+ return change_page_attr_set_clr(addr, numpages, __pgprot(0), mask, 0);
+}
+
+int _set_memory_uc(unsigned long addr, int numpages)
+{
+ return change_page_attr_set(addr, numpages,
+ __pgprot(_PAGE_CACHE_UC));
}
int set_memory_uc(unsigned long addr, int numpages)
{
- return change_page_attr_set(addr, numpages,
- __pgprot(_PAGE_PCD));
+ if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+ _PAGE_CACHE_UC, NULL))
+ return -EINVAL;
+
+ return _set_memory_uc(addr, numpages);
}
EXPORT_SYMBOL(set_memory_uc);
-int set_memory_wb(unsigned long addr, int numpages)
+int _set_memory_wc(unsigned long addr, int numpages)
+{
+ return change_page_attr_set(addr, numpages,
+ __pgprot(_PAGE_CACHE_WC));
+}
+
+int set_memory_wc(unsigned long addr, int numpages)
+{
+ if (!pat_wc_enabled)
+ return set_memory_uc(addr, numpages);
+
+ if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+ _PAGE_CACHE_WC, NULL))
+ return -EINVAL;
+
+ return _set_memory_wc(addr, numpages);
+}
+EXPORT_SYMBOL(set_memory_wc);
+
+int _set_memory_wb(unsigned long addr, int numpages)
{
return change_page_attr_clear(addr, numpages,
- __pgprot(_PAGE_PCD | _PAGE_PWT));
+ __pgprot(_PAGE_CACHE_MASK));
+}
+
+int set_memory_wb(unsigned long addr, int numpages)
+{
+ free_memtype(addr, addr + numpages * PAGE_SIZE);
+
+ return _set_memory_wb(addr, numpages);
}
EXPORT_SYMBOL(set_memory_wb);
@@ -809,6 +853,12 @@
return change_page_attr_clear(addr, numpages, __pgprot(_PAGE_PRESENT));
}
+int set_memory_4k(unsigned long addr, int numpages)
+{
+ return change_page_attr_set_clr(addr, numpages, __pgprot(0),
+ __pgprot(0), 1);
+}
+
int set_pages_uc(struct page *page, int numpages)
{
unsigned long addr = (unsigned long)page_address(page);
@@ -918,6 +968,45 @@
cpa_fill_pool(NULL);
}
+#ifdef CONFIG_DEBUG_FS
+static int dpa_show(struct seq_file *m, void *v)
+{
+ seq_puts(m, "DEBUG_PAGEALLOC\n");
+ seq_printf(m, "pool_size : %lu\n", pool_size);
+ seq_printf(m, "pool_pages : %lu\n", pool_pages);
+ seq_printf(m, "pool_low : %lu\n", pool_low);
+ seq_printf(m, "pool_used : %lu\n", pool_used);
+ seq_printf(m, "pool_failed : %lu\n", pool_failed);
+
+ return 0;
+}
+
+static int dpa_open(struct inode *inode, struct file *filp)
+{
+ return single_open(filp, dpa_show, NULL);
+}
+
+static const struct file_operations dpa_fops = {
+ .open = dpa_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+int __init debug_pagealloc_proc_init(void)
+{
+ struct dentry *de;
+
+ de = debugfs_create_file("debug_pagealloc", 0600, NULL, NULL,
+ &dpa_fops);
+ if (!de)
+ return -ENOMEM;
+
+ return 0;
+}
+__initcall(debug_pagealloc_proc_init);
+#endif
+
#ifdef CONFIG_HIBERNATION
bool kernel_page_present(struct page *page)
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
new file mode 100644
index 0000000..72c0f60
--- /dev/null
+++ b/arch/x86/mm/pat.c
@@ -0,0 +1,421 @@
+/*
+ * Handle caching attributes in page tables (PAT)
+ *
+ * Authors: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ * Suresh B Siddha <suresh.b.siddha@intel.com>
+ *
+ * Loosely based on earlier PAT patchset from Eric Biederman and Andi Kleen.
+ */
+
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/fs.h>
+
+#include <asm/msr.h>
+#include <asm/tlbflush.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/pat.h>
+#include <asm/e820.h>
+#include <asm/cacheflush.h>
+#include <asm/fcntl.h>
+#include <asm/mtrr.h>
+
+int pat_wc_enabled = 1;
+
+static u64 __read_mostly boot_pat_state;
+
+static int nopat(char *str)
+{
+ pat_wc_enabled = 0;
+ printk(KERN_INFO "x86: PAT support disabled.\n");
+
+ return 0;
+}
+early_param("nopat", nopat);
+
+static int pat_known_cpu(void)
+{
+ if (!pat_wc_enabled)
+ return 0;
+
+ if (cpu_has_pat)
+ return 1;
+
+ pat_wc_enabled = 0;
+ printk(KERN_INFO "CPU and/or kernel does not support PAT.\n");
+ return 0;
+}
+
+enum {
+ PAT_UC = 0, /* uncached */
+ PAT_WC = 1, /* Write combining */
+ PAT_WT = 4, /* Write Through */
+ PAT_WP = 5, /* Write Protected */
+ PAT_WB = 6, /* Write Back (default) */
+ PAT_UC_MINUS = 7, /* UC, but can be overriden by MTRR */
+};
+
+#define PAT(x,y) ((u64)PAT_ ## y << ((x)*8))
+
+void pat_init(void)
+{
+ u64 pat;
+
+#ifndef CONFIG_X86_PAT
+ nopat(NULL);
+#endif
+
+ /* Boot CPU enables PAT based on CPU feature */
+ if (!smp_processor_id() && !pat_known_cpu())
+ return;
+
+ /* APs enable PAT iff boot CPU has enabled it before */
+ if (smp_processor_id() && !pat_wc_enabled)
+ return;
+
+ /* Set PWT to Write-Combining. All other bits stay the same */
+ /*
+ * PTE encoding used in Linux:
+ * PAT
+ * |PCD
+ * ||PWT
+ * |||
+ * 000 WB _PAGE_CACHE_WB
+ * 001 WC _PAGE_CACHE_WC
+ * 010 UC- _PAGE_CACHE_UC_MINUS
+ * 011 UC _PAGE_CACHE_UC
+ * PAT bit unused
+ */
+ pat = PAT(0,WB) | PAT(1,WC) | PAT(2,UC_MINUS) | PAT(3,UC) |
+ PAT(4,WB) | PAT(5,WC) | PAT(6,UC_MINUS) | PAT(7,UC);
+
+ /* Boot CPU check */
+ if (!smp_processor_id()) {
+ rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
+ }
+
+ wrmsrl(MSR_IA32_CR_PAT, pat);
+ printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
+ smp_processor_id(), boot_pat_state, pat);
+}
+
+#undef PAT
+
+static char *cattr_name(unsigned long flags)
+{
+ switch (flags & _PAGE_CACHE_MASK) {
+ case _PAGE_CACHE_UC: return "uncached";
+ case _PAGE_CACHE_UC_MINUS: return "uncached-minus";
+ case _PAGE_CACHE_WB: return "write-back";
+ case _PAGE_CACHE_WC: return "write-combining";
+ default: return "broken";
+ }
+}
+
+/*
+ * The global memtype list keeps track of memory type for specific
+ * physical memory areas. Conflicting memory types in different
+ * mappings can cause CPU cache corruption. To avoid this we keep track.
+ *
+ * The list is sorted based on starting address and can contain multiple
+ * entries for each address (this allows reference counting for overlapping
+ * areas). All the aliases have the same cache attributes of course.
+ * Zero attributes are represented as holes.
+ *
+ * Currently the data structure is a list because the number of mappings
+ * are expected to be relatively small. If this should be a problem
+ * it could be changed to a rbtree or similar.
+ *
+ * memtype_lock protects the whole list.
+ */
+
+struct memtype {
+ u64 start;
+ u64 end;
+ unsigned long type;
+ struct list_head nd;
+};
+
+static LIST_HEAD(memtype_list);
+static DEFINE_SPINLOCK(memtype_lock); /* protects memtype list */
+
+/*
+ * Does intersection of PAT memory type and MTRR memory type and returns
+ * the resulting memory type as PAT understands it.
+ * (Type in pat and mtrr will not have same value)
+ * The intersection is based on "Effective Memory Type" tables in IA-32
+ * SDM vol 3a
+ */
+static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot,
+ unsigned long *ret_prot)
+{
+ unsigned long pat_type;
+ u8 mtrr_type;
+
+ mtrr_type = mtrr_type_lookup(start, end);
+ if (mtrr_type == 0xFF) { /* MTRR not enabled */
+ *ret_prot = prot;
+ return 0;
+ }
+ if (mtrr_type == 0xFE) { /* MTRR match error */
+ *ret_prot = _PAGE_CACHE_UC;
+ return -1;
+ }
+ if (mtrr_type != MTRR_TYPE_UNCACHABLE &&
+ mtrr_type != MTRR_TYPE_WRBACK &&
+ mtrr_type != MTRR_TYPE_WRCOMB) { /* MTRR type unhandled */
+ *ret_prot = _PAGE_CACHE_UC;
+ return -1;
+ }
+
+ pat_type = prot & _PAGE_CACHE_MASK;
+ prot &= (~_PAGE_CACHE_MASK);
+
+ /* Currently doing intersection by hand. Optimize it later. */
+ if (pat_type == _PAGE_CACHE_WC) {
+ *ret_prot = prot | _PAGE_CACHE_WC;
+ } else if (pat_type == _PAGE_CACHE_UC_MINUS) {
+ *ret_prot = prot | _PAGE_CACHE_UC_MINUS;
+ } else if (pat_type == _PAGE_CACHE_UC ||
+ mtrr_type == MTRR_TYPE_UNCACHABLE) {
+ *ret_prot = prot | _PAGE_CACHE_UC;
+ } else if (mtrr_type == MTRR_TYPE_WRCOMB) {
+ *ret_prot = prot | _PAGE_CACHE_WC;
+ } else {
+ *ret_prot = prot | _PAGE_CACHE_WB;
+ }
+
+ return 0;
+}
+
+int reserve_memtype(u64 start, u64 end, unsigned long req_type,
+ unsigned long *ret_type)
+{
+ struct memtype *new_entry = NULL;
+ struct memtype *parse;
+ unsigned long actual_type;
+ int err = 0;
+
+ /* Only track when pat_wc_enabled */
+ if (!pat_wc_enabled) {
+ if (ret_type)
+ *ret_type = req_type;
+
+ return 0;
+ }
+
+ /* Low ISA region is always mapped WB in page table. No need to track */
+ if (start >= ISA_START_ADDRESS && (end - 1) <= ISA_END_ADDRESS) {
+ if (ret_type)
+ *ret_type = _PAGE_CACHE_WB;
+
+ return 0;
+ }
+
+ req_type &= _PAGE_CACHE_MASK;
+ err = pat_x_mtrr_type(start, end, req_type, &actual_type);
+ if (err) {
+ if (ret_type)
+ *ret_type = actual_type;
+
+ return -EINVAL;
+ }
+
+ new_entry = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+ if (!new_entry)
+ return -ENOMEM;
+
+ new_entry->start = start;
+ new_entry->end = end;
+ new_entry->type = actual_type;
+
+ if (ret_type)
+ *ret_type = actual_type;
+
+ spin_lock(&memtype_lock);
+
+ /* Search for existing mapping that overlaps the current range */
+ list_for_each_entry(parse, &memtype_list, nd) {
+ struct memtype *saved_ptr;
+
+ if (parse->start >= end) {
+ printk("New Entry\n");
+ list_add(&new_entry->nd, parse->nd.prev);
+ new_entry = NULL;
+ break;
+ }
+
+ if (start <= parse->start && end >= parse->start) {
+ if (actual_type != parse->type && ret_type) {
+ actual_type = parse->type;
+ *ret_type = actual_type;
+ new_entry->type = actual_type;
+ }
+
+ if (actual_type != parse->type) {
+ printk(
+ KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
+ current->comm, current->pid,
+ start, end,
+ cattr_name(actual_type),
+ cattr_name(parse->type));
+ err = -EBUSY;
+ break;
+ }
+
+ saved_ptr = parse;
+ /*
+ * Check to see whether the request overlaps more
+ * than one entry in the list
+ */
+ list_for_each_entry_continue(parse, &memtype_list, nd) {
+ if (end <= parse->start) {
+ break;
+ }
+
+ if (actual_type != parse->type) {
+ printk(
+ KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
+ current->comm, current->pid,
+ start, end,
+ cattr_name(actual_type),
+ cattr_name(parse->type));
+ err = -EBUSY;
+ break;
+ }
+ }
+
+ if (err) {
+ break;
+ }
+
+ printk("Overlap at 0x%Lx-0x%Lx\n",
+ saved_ptr->start, saved_ptr->end);
+ /* No conflict. Go ahead and add this new entry */
+ list_add(&new_entry->nd, saved_ptr->nd.prev);
+ new_entry = NULL;
+ break;
+ }
+
+ if (start < parse->end) {
+ if (actual_type != parse->type && ret_type) {
+ actual_type = parse->type;
+ *ret_type = actual_type;
+ new_entry->type = actual_type;
+ }
+
+ if (actual_type != parse->type) {
+ printk(
+ KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
+ current->comm, current->pid,
+ start, end,
+ cattr_name(actual_type),
+ cattr_name(parse->type));
+ err = -EBUSY;
+ break;
+ }
+
+ saved_ptr = parse;
+ /*
+ * Check to see whether the request overlaps more
+ * than one entry in the list
+ */
+ list_for_each_entry_continue(parse, &memtype_list, nd) {
+ if (end <= parse->start) {
+ break;
+ }
+
+ if (actual_type != parse->type) {
+ printk(
+ KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
+ current->comm, current->pid,
+ start, end,
+ cattr_name(actual_type),
+ cattr_name(parse->type));
+ err = -EBUSY;
+ break;
+ }
+ }
+
+ if (err) {
+ break;
+ }
+
+ printk("Overlap at 0x%Lx-0x%Lx\n",
+ saved_ptr->start, saved_ptr->end);
+ /* No conflict. Go ahead and add this new entry */
+ list_add(&new_entry->nd, &saved_ptr->nd);
+ new_entry = NULL;
+ break;
+ }
+ }
+
+ if (err) {
+ printk(
+ "reserve_memtype failed 0x%Lx-0x%Lx, track %s, req %s\n",
+ start, end, cattr_name(new_entry->type),
+ cattr_name(req_type));
+ kfree(new_entry);
+ spin_unlock(&memtype_lock);
+ return err;
+ }
+
+ if (new_entry) {
+ /* No conflict. Not yet added to the list. Add to the tail */
+ list_add_tail(&new_entry->nd, &memtype_list);
+ printk("New Entry\n");
+ }
+
+ if (ret_type) {
+ printk(
+ "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n",
+ start, end, cattr_name(actual_type),
+ cattr_name(req_type), cattr_name(*ret_type));
+ } else {
+ printk(
+ "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s\n",
+ start, end, cattr_name(actual_type),
+ cattr_name(req_type));
+ }
+
+ spin_unlock(&memtype_lock);
+ return err;
+}
+
+int free_memtype(u64 start, u64 end)
+{
+ struct memtype *ml;
+ int err = -EINVAL;
+
+ /* Only track when pat_wc_enabled */
+ if (!pat_wc_enabled) {
+ return 0;
+ }
+
+ /* Low ISA region is always mapped WB. No need to track */
+ if (start >= ISA_START_ADDRESS && end <= ISA_END_ADDRESS) {
+ return 0;
+ }
+
+ spin_lock(&memtype_lock);
+ list_for_each_entry(ml, &memtype_list, nd) {
+ if (ml->start == start && ml->end == end) {
+ list_del(&ml->nd);
+ kfree(ml);
+ err = 0;
+ break;
+ }
+ }
+ spin_unlock(&memtype_lock);
+
+ if (err) {
+ printk(KERN_DEBUG "%s:%d freeing invalid memtype %Lx-%Lx\n",
+ current->comm, current->pid, start, end);
+ }
+
+ printk( "free_memtype request 0x%Lx-0x%Lx\n", start, end);
+ return err;
+}
+
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 2f9e9af..3165ec0 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -36,7 +36,6 @@
printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk(KERN_INFO "Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_pgdat(pgdat) {
pgdat_resize_lock(pgdat, &flags);
for (i = 0; i < pgdat->node_spanned_pages; ++i) {
@@ -381,3 +380,10 @@
}
#endif
+
+int pmd_bad(pmd_t pmd)
+{
+ WARN_ON_ONCE(pmd_bad_v1(pmd) != pmd_bad_v2(pmd));
+
+ return pmd_bad_v1(pmd);
+}
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 845001c..1bae9c8 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -20,6 +20,7 @@
#include <asm/proto.h>
#include <asm/numa.h>
#include <asm/e820.h>
+#include <asm/genapic.h>
int acpi_numa __initdata;
@@ -132,7 +133,6 @@
int pxm, node;
int apic_id;
- apic_id = pa->apic_id;
if (srat_disabled())
return;
if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
@@ -148,6 +148,11 @@
bad_srat();
return;
}
+
+ if (is_uv_system())
+ apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
+ else
+ apic_id = pa->apic_id;
apicid_to_node[apic_id] = node;
acpi_numa = 1;
printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
diff --git a/arch/x86/oprofile/init.c b/arch/x86/oprofile/init.c
index 5341d48..cdfe4c5 100644
--- a/arch/x86/oprofile/init.c
+++ b/arch/x86/oprofile/init.c
@@ -10,18 +10,19 @@
#include <linux/oprofile.h>
#include <linux/init.h>
#include <linux/errno.h>
-
-/* We support CPUs that have performance counters like the Pentium Pro
+
+/*
+ * We support CPUs that have performance counters like the Pentium Pro
* with the NMI mode driver.
*/
-
-extern int op_nmi_init(struct oprofile_operations * ops);
-extern int op_nmi_timer_init(struct oprofile_operations * ops);
+
+extern int op_nmi_init(struct oprofile_operations *ops);
+extern int op_nmi_timer_init(struct oprofile_operations *ops);
extern void op_nmi_exit(void);
extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth);
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
{
int ret;
diff --git a/arch/x86/oprofile/nmi_timer_int.c b/arch/x86/oprofile/nmi_timer_int.c
index 1418e36..e3ecb71 100644
--- a/arch/x86/oprofile/nmi_timer_int.c
+++ b/arch/x86/oprofile/nmi_timer_int.c
@@ -17,14 +17,14 @@
#include <asm/nmi.h>
#include <asm/apic.h>
#include <asm/ptrace.h>
-
+
static int profile_timer_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
struct die_args *args = (struct die_args *)data;
int ret = NOTIFY_DONE;
- switch(val) {
+ switch (val) {
case DIE_NMI:
oprofile_add_sample(args->regs, 0);
ret = NOTIFY_STOP;
@@ -56,7 +56,7 @@
}
-int __init op_nmi_timer_init(struct oprofile_operations * ops)
+int __init op_nmi_timer_init(struct oprofile_operations *ops)
{
if ((nmi_watchdog != NMI_IO_APIC) || (atomic_read(&nmi_active) <= 0))
return -ENODEV;
diff --git a/arch/x86/oprofile/op_model_athlon.c b/arch/x86/oprofile/op_model_athlon.c
index c3ee433..3d53487 100644
--- a/arch/x86/oprofile/op_model_athlon.c
+++ b/arch/x86/oprofile/op_model_athlon.c
@@ -1,4 +1,4 @@
-/**
+/*
* @file op_model_athlon.h
* athlon / K7 / K8 / Family 10h model-specific MSR operations
*
@@ -14,28 +14,28 @@
#include <asm/ptrace.h>
#include <asm/msr.h>
#include <asm/nmi.h>
-
+
#include "op_x86_model.h"
#include "op_counter.h"
#define NUM_COUNTERS 4
#define NUM_CONTROLS 4
-#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0)
-#define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1);} while (0)
+#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
+#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
+#define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0)
#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTRL_READ(l,h,msrs,c) do {rdmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
-#define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
+#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
+#define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
+#define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
#define CTRL_CLEAR_LO(x) (x &= (1<<21))
#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
+#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
+#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
#define CTRL_SET_UM(val, m) (val |= (m << 8))
#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
@@ -43,19 +43,19 @@
#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
static unsigned long reset_value[NUM_COUNTERS];
-
+
static void athlon_fill_in_addresses(struct op_msrs * const msrs)
{
int i;
- for (i=0; i < NUM_COUNTERS; i++) {
+ for (i = 0; i < NUM_COUNTERS; i++) {
if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
else
msrs->counters[i].addr = 0;
}
- for (i=0; i < NUM_CONTROLS; i++) {
+ for (i = 0; i < NUM_CONTROLS; i++) {
if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i))
msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
else
@@ -63,15 +63,15 @@
}
}
-
+
static void athlon_setup_ctrs(struct op_msrs const * const msrs)
{
unsigned int low, high;
int i;
-
+
/* clear all counters */
for (i = 0 ; i < NUM_CONTROLS; ++i) {
- if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+ if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
continue;
CTRL_READ(low, high, msrs, i);
CTRL_CLEAR_LO(low);
@@ -81,14 +81,14 @@
/* avoid a false detection of ctr overflows in NMI handler */
for (i = 0; i < NUM_COUNTERS; ++i) {
- if (unlikely(!CTR_IS_RESERVED(msrs,i)))
+ if (unlikely(!CTR_IS_RESERVED(msrs, i)))
continue;
CTR_WRITE(1, msrs, i);
}
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
- if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) {
+ if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
reset_value[i] = counter_config[i].count;
CTR_WRITE(counter_config[i].count, msrs, i);
@@ -112,7 +112,7 @@
}
}
-
+
static int athlon_check_ctrs(struct pt_regs * const regs,
struct op_msrs const * const msrs)
{
@@ -133,7 +133,7 @@
return 1;
}
-
+
static void athlon_start(struct op_msrs const * const msrs)
{
unsigned int low, high;
@@ -150,7 +150,7 @@
static void athlon_stop(struct op_msrs const * const msrs)
{
- unsigned int low,high;
+ unsigned int low, high;
int i;
/* Subtle: stop on all counters to avoid race with
@@ -169,11 +169,11 @@
int i;
for (i = 0 ; i < NUM_COUNTERS ; ++i) {
- if (CTR_IS_RESERVED(msrs,i))
+ if (CTR_IS_RESERVED(msrs, i))
release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
}
for (i = 0 ; i < NUM_CONTROLS ; ++i) {
- if (CTRL_IS_RESERVED(msrs,i))
+ if (CTRL_IS_RESERVED(msrs, i))
release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
}
}
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index c554f52..eff431f 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -1,4 +1,4 @@
-/**
+/*
* @file op_model_ppro.h
* pentium pro / P6 model-specific MSR operations
*
@@ -15,45 +15,45 @@
#include <asm/msr.h>
#include <asm/apic.h>
#include <asm/nmi.h>
-
+
#include "op_x86_model.h"
#include "op_counter.h"
#define NUM_COUNTERS 2
#define NUM_CONTROLS 2
-#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0)
-#define CTR_32BIT_WRITE(l,msrs,c) \
- do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0);} while (0)
+#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
+#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
+#define CTR_32BIT_WRITE(l, msrs, c) \
+ do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0); } while (0)
#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTRL_READ(l,h,msrs,c) do {rdmsr((msrs->controls[(c)].addr), (l), (h));} while (0)
-#define CTRL_WRITE(l,h,msrs,c) do {wrmsr((msrs->controls[(c)].addr), (l), (h));} while (0)
+#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
+#define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
+#define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
#define CTRL_CLEAR(x) (x &= (1<<21))
#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
+#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
+#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
#define CTRL_SET_UM(val, m) (val |= (m << 8))
#define CTRL_SET_EVENT(val, e) (val |= e)
static unsigned long reset_value[NUM_COUNTERS];
-
+
static void ppro_fill_in_addresses(struct op_msrs * const msrs)
{
int i;
- for (i=0; i < NUM_COUNTERS; i++) {
+ for (i = 0; i < NUM_COUNTERS; i++) {
if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
else
msrs->counters[i].addr = 0;
}
-
- for (i=0; i < NUM_CONTROLS; i++) {
+
+ for (i = 0; i < NUM_CONTROLS; i++) {
if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
else
@@ -69,23 +69,23 @@
/* clear all counters */
for (i = 0 ; i < NUM_CONTROLS; ++i) {
- if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+ if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
continue;
CTRL_READ(low, high, msrs, i);
CTRL_CLEAR(low);
CTRL_WRITE(low, high, msrs, i);
}
-
+
/* avoid a false detection of ctr overflows in NMI handler */
for (i = 0; i < NUM_COUNTERS; ++i) {
- if (unlikely(!CTR_IS_RESERVED(msrs,i)))
+ if (unlikely(!CTR_IS_RESERVED(msrs, i)))
continue;
CTR_32BIT_WRITE(1, msrs, i);
}
/* enable active counters */
for (i = 0; i < NUM_COUNTERS; ++i) {
- if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) {
+ if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
reset_value[i] = counter_config[i].count;
CTR_32BIT_WRITE(counter_config[i].count, msrs, i);
@@ -104,13 +104,13 @@
}
}
-
+
static int ppro_check_ctrs(struct pt_regs * const regs,
struct op_msrs const * const msrs)
{
unsigned int low, high;
int i;
-
+
for (i = 0 ; i < NUM_COUNTERS; ++i) {
if (!reset_value[i])
continue;
@@ -135,10 +135,10 @@
return 1;
}
-
+
static void ppro_start(struct op_msrs const * const msrs)
{
- unsigned int low,high;
+ unsigned int low, high;
int i;
for (i = 0; i < NUM_COUNTERS; ++i) {
@@ -153,7 +153,7 @@
static void ppro_stop(struct op_msrs const * const msrs)
{
- unsigned int low,high;
+ unsigned int low, high;
int i;
for (i = 0; i < NUM_COUNTERS; ++i) {
@@ -170,11 +170,11 @@
int i;
for (i = 0 ; i < NUM_COUNTERS ; ++i) {
- if (CTR_IS_RESERVED(msrs,i))
+ if (CTR_IS_RESERVED(msrs, i))
release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
}
for (i = 0 ; i < NUM_CONTROLS ; ++i) {
- if (CTRL_IS_RESERVED(msrs,i))
+ if (CTRL_IS_RESERVED(msrs, i))
release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
}
}
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 0234f28..378136f 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -219,8 +219,21 @@
if (pxm >= 0)
sd->node = pxm_to_node(pxm);
#endif
+ /*
+ * Maybe the desired pci bus has been already scanned. In such case
+ * it is unnecessary to scan the pci bus with the given domain,busnum.
+ */
+ bus = pci_find_bus(domain, busnum);
+ if (bus) {
+ /*
+ * If the desired bus exits, the content of bus->sysdata will
+ * be replaced by sd.
+ */
+ memcpy(bus->sysdata, sd, sizeof(*sd));
+ kfree(sd);
+ } else
+ bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
- bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
if (!bus)
kfree(sd);
@@ -228,7 +241,7 @@
if (bus != NULL) {
if (pxm >= 0) {
printk("bus %d -> pxm %d -> node %d\n",
- busnum, pxm, sd->node);
+ busnum, pxm, pxm_to_node(pxm));
}
}
#endif
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 103b9df..2ead723 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -30,6 +30,9 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/errno.h>
+#include <linux/bootmem.h>
+
+#include <asm/pat.h>
#include "pci.h"
@@ -297,10 +300,35 @@
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
+static void pci_unmap_page_range(struct vm_area_struct *vma)
+{
+ u64 addr = (u64)vma->vm_pgoff << PAGE_SHIFT;
+ free_memtype(addr, addr + vma->vm_end - vma->vm_start);
+}
+
+static void pci_track_mmap_page_range(struct vm_area_struct *vma)
+{
+ u64 addr = (u64)vma->vm_pgoff << PAGE_SHIFT;
+ unsigned long flags = pgprot_val(vma->vm_page_prot)
+ & _PAGE_CACHE_MASK;
+
+ reserve_memtype(addr, addr + vma->vm_end - vma->vm_start, flags, NULL);
+}
+
+static struct vm_operations_struct pci_mmap_ops = {
+ .open = pci_track_mmap_page_range,
+ .close = pci_unmap_page_range,
+};
+
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
unsigned long prot;
+ u64 addr = vma->vm_pgoff << PAGE_SHIFT;
+ unsigned long len = vma->vm_end - vma->vm_start;
+ unsigned long flags;
+ unsigned long new_flags;
+ int retval;
/* I/O space cannot be accessed via normal processor loads and
* stores on this platform.
@@ -308,21 +336,50 @@
if (mmap_state == pci_mmap_io)
return -EINVAL;
- /* Leave vm_pgoff as-is, the PCI space address is the physical
- * address on this platform.
- */
prot = pgprot_val(vma->vm_page_prot);
- if (boot_cpu_data.x86 > 3)
- prot |= _PAGE_PCD | _PAGE_PWT;
+ if (pat_wc_enabled && write_combine)
+ prot |= _PAGE_CACHE_WC;
+ else if (boot_cpu_data.x86 > 3)
+ prot |= _PAGE_CACHE_UC;
+
vma->vm_page_prot = __pgprot(prot);
- /* Write-combine setting is ignored, it is changed via the mtrr
- * interfaces on this platform.
- */
+ flags = pgprot_val(vma->vm_page_prot) & _PAGE_CACHE_MASK;
+ retval = reserve_memtype(addr, addr + len, flags, &new_flags);
+ if (retval)
+ return retval;
+
+ if (flags != new_flags) {
+ /*
+ * Do not fallback to certain memory types with certain
+ * requested type:
+ * - request is uncached, return cannot be write-back
+ * - request is uncached, return cannot be write-combine
+ * - request is write-combine, return cannot be write-back
+ */
+ if ((flags == _PAGE_CACHE_UC &&
+ (new_flags == _PAGE_CACHE_WB ||
+ new_flags == _PAGE_CACHE_WC)) ||
+ (flags == _PAGE_CACHE_WC &&
+ new_flags == _PAGE_CACHE_WB)) {
+ free_memtype(addr, addr+len);
+ return -EINVAL;
+ }
+ flags = new_flags;
+ }
+
+ if (vma->vm_pgoff <= max_pfn_mapped &&
+ ioremap_change_attr((unsigned long)__va(addr), len, flags)) {
+ free_memtype(addr, addr + len);
+ return -EINVAL;
+ }
+
if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start,
vma->vm_page_prot))
return -EAGAIN;
+ vma->vm_ops = &pci_mmap_ops;
+
return 0;
}
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index a871586..579745c 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -200,7 +200,7 @@
{
static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 };
- WARN_ON_ONCE(pirq >= 16);
+ WARN_ON_ONCE(pirq > 16);
return irqmap[read_config_nybble(router, 0x48, pirq-1)];
}
@@ -209,7 +209,7 @@
static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 };
unsigned int val = irqmap[irq];
- WARN_ON_ONCE(pirq >= 16);
+ WARN_ON_ONCE(pirq > 16);
if (val) {
write_config_nybble(router, 0x48, pirq-1, val);
return 1;
@@ -260,7 +260,7 @@
{
static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
- WARN_ON_ONCE(pirq >= 5);
+ WARN_ON_ONCE(pirq > 5);
return read_config_nybble(router, 0x55, pirqmap[pirq-1]);
}
@@ -268,7 +268,7 @@
{
static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
- WARN_ON_ONCE(pirq >= 5);
+ WARN_ON_ONCE(pirq > 5);
write_config_nybble(router, 0x55, pirqmap[pirq-1], irq);
return 1;
}
@@ -282,7 +282,7 @@
{
static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
- WARN_ON_ONCE(pirq >= 4);
+ WARN_ON_ONCE(pirq > 4);
return read_config_nybble(router,0x43, pirqmap[pirq-1]);
}
@@ -290,7 +290,7 @@
{
static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
- WARN_ON_ONCE(pirq >= 4);
+ WARN_ON_ONCE(pirq > 4);
write_config_nybble(router, 0x43, pirqmap[pirq-1], irq);
return 1;
}
diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numa.c
index 55270c2..d9afbae 100644
--- a/arch/x86/pci/numa.c
+++ b/arch/x86/pci/numa.c
@@ -11,11 +11,41 @@
#define XQUAD_PORTIO_BASE 0xfe400000
#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
+int mp_bus_id_to_node[MAX_MP_BUSSES];
#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-extern void *xquad_portio; /* Where the IO area was mapped */
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
+
+void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
+ struct mpc_config_translation *translation)
+{
+ int quad = translation->trans_quad;
+ int local = translation->trans_local;
+
+ mp_bus_id_to_node[m->mpc_busid] = quad;
+ mp_bus_id_to_local[m->mpc_busid] = local;
+ printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+ m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
+void mpc_oem_pci_bus(struct mpc_config_bus *m,
+ struct mpc_config_translation *translation)
+{
+ int quad = translation->trans_quad;
+ int local = translation->trans_local;
+
+ quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
+/* Where the IO area was mapped on multiquad, always 0 otherwise */
+void *xquad_portio;
+#ifdef CONFIG_X86_NUMAQ
+EXPORT_SYMBOL(xquad_portio);
+#endif
+
#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c
index 7f9c6da..7dc5d5c 100644
--- a/arch/x86/power/cpu_32.c
+++ b/arch/x86/power/cpu_32.c
@@ -27,17 +27,17 @@
/*
* descriptor tables
*/
- store_gdt(&ctxt->gdt);
- store_idt(&ctxt->idt);
- store_tr(ctxt->tr);
+ store_gdt(&ctxt->gdt);
+ store_idt(&ctxt->idt);
+ store_tr(ctxt->tr);
/*
* segment registers
*/
- savesegment(es, ctxt->es);
- savesegment(fs, ctxt->fs);
- savesegment(gs, ctxt->gs);
- savesegment(ss, ctxt->ss);
+ savesegment(es, ctxt->es);
+ savesegment(fs, ctxt->fs);
+ savesegment(gs, ctxt->gs);
+ savesegment(ss, ctxt->ss);
/*
* control registers
@@ -48,10 +48,12 @@
ctxt->cr4 = read_cr4();
}
+/* Needed by apm.c */
void save_processor_state(void)
{
__save_processor_state(&saved_context);
}
+EXPORT_SYMBOL(save_processor_state);
static void do_fpu_end(void)
{
@@ -64,9 +66,14 @@
static void fix_processor_context(void)
{
int cpu = smp_processor_id();
- struct tss_struct * t = &per_cpu(init_tss, cpu);
+ struct tss_struct *t = &per_cpu(init_tss, cpu);
- set_tss_desc(cpu,t); /* This just modifies memory; should not be necessary. But... This is necessary, because 386 hardware has concept of busy TSS or some similar stupidity. */
+ set_tss_desc(cpu, t); /*
+ * This just modifies memory; should not be
+ * necessary. But... This is necessary, because
+ * 386 hardware has concept of busy TSS or some
+ * similar stupidity.
+ */
load_TR_desc(); /* This does ltr */
load_LDT(¤t->active_mm->context); /* This does lldt */
@@ -100,16 +107,16 @@
* now restore the descriptor tables to their proper values
* ltr is done i fix_processor_context().
*/
- load_gdt(&ctxt->gdt);
- load_idt(&ctxt->idt);
+ load_gdt(&ctxt->gdt);
+ load_idt(&ctxt->idt);
/*
* segment registers
*/
- loadsegment(es, ctxt->es);
- loadsegment(fs, ctxt->fs);
- loadsegment(gs, ctxt->gs);
- loadsegment(ss, ctxt->ss);
+ loadsegment(es, ctxt->es);
+ loadsegment(fs, ctxt->fs);
+ loadsegment(gs, ctxt->gs);
+ loadsegment(ss, ctxt->ss);
/*
* sysenter MSRs
@@ -123,11 +130,9 @@
mcheck_init(&boot_cpu_data);
}
+/* Needed by apm.c */
void restore_processor_state(void)
{
__restore_processor_state(&saved_context);
}
-
-/* Needed by apm.c */
-EXPORT_SYMBOL(save_processor_state);
EXPORT_SYMBOL(restore_processor_state);
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 0a8f474..17a6b05 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -39,7 +39,7 @@
CFL := $(PROFILING) -mcmodel=small -fPIC -g0 -O2 -fasynchronous-unwind-tables -m64
-$(vobjs): KBUILD_CFLAGS = $(CFL)
+$(vobjs): KBUILD_CFLAGS += $(CFL)
targets += vdso-syms.lds
obj-$(VDSO64-y) += vdso-syms.lds
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 348f134..e2af8ee 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -210,8 +210,12 @@
/* May not be __init: called during resume */
void syscall32_cpu_init(void)
{
- if (use_sysenter < 0)
- use_sysenter = (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL);
+ if (use_sysenter < 0) {
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ use_sysenter = 1;
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR)
+ use_sysenter = 1;
+ }
/* Load these always in case some future AMD CPU supports
SYSENTER from compat mode too. */
@@ -325,6 +329,9 @@
int ret = 0;
bool compat;
+ if (vdso_enabled == VDSO_DISABLED)
+ return 0;
+
down_write(&mm->mmap_sem);
/* Test compat mode once here, in case someone
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index de4e6f0..c038822 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -25,6 +25,7 @@
#include <linux/mm.h>
#include <linux/page-flags.h>
#include <linux/highmem.h>
+#include <linux/console.h>
#include <xen/interface/xen.h>
#include <xen/interface/physdev.h>
@@ -667,10 +668,10 @@
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
-static void pin_pagetable_pfn(unsigned level, unsigned long pfn)
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
{
struct mmuext_op op;
- op.cmd = level;
+ op.cmd = cmd;
op.arg1.mfn = pfn_to_mfn(pfn);
if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
BUG();
@@ -687,7 +688,8 @@
if (!PageHighMem(page)) {
make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
- pin_pagetable_pfn(level, pfn);
+ if (level == PT_PTE)
+ pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
} else
/* make sure there are no stray mappings of
this page */
@@ -697,27 +699,39 @@
static void xen_alloc_pt(struct mm_struct *mm, u32 pfn)
{
- xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L1_TABLE);
+ xen_alloc_ptpage(mm, pfn, PT_PTE);
}
static void xen_alloc_pd(struct mm_struct *mm, u32 pfn)
{
- xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L2_TABLE);
+ xen_alloc_ptpage(mm, pfn, PT_PMD);
}
/* This should never happen until we're OK to use struct page */
-static void xen_release_pt(u32 pfn)
+static void xen_release_ptpage(u32 pfn, unsigned level)
{
struct page *page = pfn_to_page(pfn);
if (PagePinned(page)) {
if (!PageHighMem(page)) {
- pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
+ if (level == PT_PTE)
+ pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
+ ClearPagePinned(page);
}
}
+static void xen_release_pt(u32 pfn)
+{
+ xen_release_ptpage(pfn, PT_PTE);
+}
+
+static void xen_release_pd(u32 pfn)
+{
+ xen_release_ptpage(pfn, PT_PMD);
+}
+
#ifdef CONFIG_HIGHPTE
static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
{
@@ -838,7 +852,7 @@
pv_mmu_ops.alloc_pt = xen_alloc_pt;
pv_mmu_ops.alloc_pd = xen_alloc_pd;
pv_mmu_ops.release_pt = xen_release_pt;
- pv_mmu_ops.release_pd = xen_release_pt;
+ pv_mmu_ops.release_pd = xen_release_pd;
pv_mmu_ops.set_pte = xen_set_pte;
setup_shared_info();
@@ -876,7 +890,6 @@
pv_irq_ops.irq_disable = xen_irq_disable_direct;
pv_irq_ops.irq_enable = xen_irq_enable_direct;
pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
- pv_cpu_ops.iret = xen_iret_direct;
}
}
@@ -980,7 +993,7 @@
.read_tsc = native_read_tsc,
.read_pmc = native_read_pmc,
- .iret = (void *)&hypercall_page[__HYPERVISOR_iret],
+ .iret = xen_iret,
.irq_enable_syscall_ret = NULL, /* never called */
.load_tr_desc = paravirt_nop,
@@ -1215,6 +1228,9 @@
? __pa(xen_start_info->mod_start) : 0;
boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
+ if (!is_initial_xendomain())
+ add_preferred_console("hvc", 0, NULL);
+
/* Start the world */
start_kernel();
}
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 0144395..2a054ef 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -310,13 +310,6 @@
}
#endif /* CONFIG_X86_PAE */
-enum pt_level {
- PT_PGD,
- PT_PUD,
- PT_PMD,
- PT_PTE
-};
-
/*
(Yet another) pagetable walker. This one is intended for pinning a
pagetable. This means that it walks a pagetable and calls the
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index c9ff27f..b5e189b 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -3,6 +3,13 @@
#include <linux/linkage.h>
#include <asm/page.h>
+enum pt_level {
+ PT_PGD,
+ PT_PUD,
+ PT_PMD,
+ PT_PTE
+};
+
/*
* Page-directory addresses above 4GB do not fit into architectural %cr3.
* When accessing %cr3, or equivalent field in vcpu_guest_context, guests
diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 5e6f36f..5791eb2 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -76,7 +76,7 @@
if (ret) {
printk(KERN_ERR "%d multicall(s) failed: cpu %d\n",
ret, smp_processor_id());
- for(i = 0; i < b->mcidx; i++) {
+ for (i = 0; i < b->mcidx; i++) {
printk(" call %2d/%d: op=%lu arg=[%lx] result=%ld\n",
i+1, b->mcidx,
b->debug[i].op,
@@ -93,7 +93,7 @@
local_irq_restore(flags);
- for(i = 0; i < b->cbidx; i++) {
+ for (i = 0; i < b->cbidx; i++) {
struct callback *cb = &b->callbacks[i];
(*cb->fn)(cb->data);
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index aafc544..e340ff9 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -35,7 +35,7 @@
#include "xen-ops.h"
#include "mmu.h"
-static cpumask_t cpu_initialized_map;
+static cpumask_t xen_cpu_initialized_map;
static DEFINE_PER_CPU(int, resched_irq);
static DEFINE_PER_CPU(int, callfunc_irq);
@@ -179,7 +179,7 @@
if (xen_smp_intr_init(0))
BUG();
- cpu_initialized_map = cpumask_of_cpu(0);
+ xen_cpu_initialized_map = cpumask_of_cpu(0);
/* Restrict the possible_map according to max_cpus. */
while ((num_possible_cpus() > 1) && (num_possible_cpus() > max_cpus)) {
@@ -210,7 +210,7 @@
struct vcpu_guest_context *ctxt;
struct gdt_page *gdt = &per_cpu(gdt_page, cpu);
- if (cpu_test_and_set(cpu, cpu_initialized_map))
+ if (cpu_test_and_set(cpu, xen_cpu_initialized_map))
return 0;
ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL);
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 6b71904..fe161ed 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -135,13 +135,8 @@
current stack state in whatever form its in, we keep things
simple by only using a single register which is pushed/popped
on the stack.
-
- Non-direct iret could be done in the same way, but it would
- require an annoying amount of code duplication. We'll assume
- that direct mode will be the common case once the hypervisor
- support becomes commonplace.
*/
-ENTRY(xen_iret_direct)
+ENTRY(xen_iret)
/* test eflags for special cases */
testl $(X86_EFLAGS_VM | XEN_EFLAGS_NMI), 8(%esp)
jnz hyper_iret
@@ -155,9 +150,9 @@
GET_THREAD_INFO(%eax)
movl TI_cpu(%eax),%eax
movl __per_cpu_offset(,%eax,4),%eax
- lea per_cpu__xen_vcpu_info(%eax),%eax
+ mov per_cpu__xen_vcpu(%eax),%eax
#else
- movl $per_cpu__xen_vcpu_info, %eax
+ movl per_cpu__xen_vcpu, %eax
#endif
/* check IF state we're restoring */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index b02a909..956a491 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -63,5 +63,5 @@
DECL_ASM(unsigned long, xen_save_fl_direct, void);
DECL_ASM(void, xen_restore_fl_direct, unsigned long);
-void xen_iret_direct(void);
+void xen_iret(void);
#endif /* XEN_OPS_H */
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index f582d6a..7419dbc 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -5,7 +5,7 @@
extra-y := head.o vmlinux.lds
-obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o semaphore.o \
+obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \
setup.o signal.o syscall.o time.o traps.o vectors.o platform.o \
pci-dma.o init_task.o io.o
diff --git a/arch/xtensa/kernel/semaphore.c b/arch/xtensa/kernel/semaphore.c
deleted file mode 100644
index 995c641..0000000
--- a/arch/xtensa/kernel/semaphore.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * arch/xtensa/kernel/semaphore.c
- *
- * Generic semaphore code. Buyer beware. Do your own specific changes
- * in <asm/semaphore-helper.h>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- *
- * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
- * Chris Zankel <chris@zankel.net>
- * Marc Gauthier<marc@tensilica.com, marc@alumni.uwaterloo.ca>
- * Kevin Chea
- */
-
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/init.h>
-#include <asm/semaphore.h>
-#include <asm/errno.h>
-
-/*
- * These two _must_ execute atomically wrt each other.
- */
-
-static __inline__ void wake_one_more(struct semaphore * sem)
-{
- atomic_inc((atomic_t *)&sem->sleepers);
-}
-
-static __inline__ int waking_non_zero(struct semaphore *sem)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->sleepers > 0) {
- sem->sleepers--;
- ret = 1;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_interruptible:
- * 1 got the lock
- * 0 go to sleep
- * -EINTR interrupted
- *
- * We must undo the sem->count down_interruptible() increment while we are
- * protected by the spinlock in order to make atomic this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-
-static __inline__ int waking_non_zero_interruptible(struct semaphore *sem,
- struct task_struct *tsk)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->sleepers > 0) {
- sem->sleepers--;
- ret = 1;
- } else if (signal_pending(tsk)) {
- atomic_inc(&sem->count);
- ret = -EINTR;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_trylock:
- * 1 failed to lock
- * 0 got the lock
- *
- * We must undo the sem->count down_trylock() increment while we are
- * protected by the spinlock in order to make atomic this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-
-static __inline__ int waking_non_zero_trylock(struct semaphore *sem)
-{
- unsigned long flags;
- int ret = 1;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->sleepers <= 0)
- atomic_inc(&sem->count);
- else {
- sem->sleepers--;
- ret = 0;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-DEFINE_SPINLOCK(semaphore_wake_lock);
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit. ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore. The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-void __up(struct semaphore *sem)
-{
- wake_one_more(sem);
- wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function. Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible. This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return. If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-#define DOWN_VAR \
- struct task_struct *tsk = current; \
- wait_queue_t wait; \
- init_waitqueue_entry(&wait, tsk);
-
-#define DOWN_HEAD(task_state) \
- \
- \
- tsk->state = (task_state); \
- add_wait_queue(&sem->wait, &wait); \
- \
- /* \
- * Ok, we're set up. sem->count is known to be less than zero \
- * so we must wait. \
- * \
- * We can let go the lock for purposes of waiting. \
- * We re-acquire it after awaking so as to protect \
- * all semaphore operations. \
- * \
- * If "up()" is called before we call waking_non_zero() then \
- * we will catch it right away. If it is called later then \
- * we will have to go through a wakeup cycle to catch it. \
- * \
- * Multiple waiters contend for the semaphore lock to see \
- * who gets to gate through and who has to wait some more. \
- */ \
- for (;;) {
-
-#define DOWN_TAIL(task_state) \
- tsk->state = (task_state); \
- } \
- tsk->state = TASK_RUNNING; \
- remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
- DOWN_VAR
- DOWN_HEAD(TASK_UNINTERRUPTIBLE)
- if (waking_non_zero(sem))
- break;
- schedule();
- DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
- DOWN_VAR
- DOWN_HEAD(TASK_INTERRUPTIBLE)
-
- ret = waking_non_zero_interruptible(sem, tsk);
- if (ret)
- {
- if (ret == 1)
- /* ret != 0 only if we get interrupted -arca */
- ret = 0;
- break;
- }
- schedule();
- DOWN_TAIL(TASK_INTERRUPTIBLE)
- return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
- return waking_non_zero_trylock(sem);
-}
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index 60dbdb4..6e52cdd 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -26,7 +26,6 @@
#include <asm/io.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
-#include <asm/semaphore.h>
#ifdef CONFIG_BLK_DEV_FD
#include <asm/floppy.h>
#endif
@@ -71,14 +70,6 @@
EXPORT_SYMBOL(__udivdi3);
EXPORT_SYMBOL(__umoddi3);
-/*
- * Semaphore operations
- */
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__down_trylock);
-EXPORT_SYMBOL(__up);
-
#ifdef CONFIG_NET
/*
* Networking support
diff --git a/block/Kconfig b/block/Kconfig
index 9bda7bc..7db9a41 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -38,7 +38,7 @@
on a block device queue. For more information (and the user space
support tools needed), fetch the blktrace app from:
- git://brick.kernel.dk/data/git/blktrace.git
+ git://git.kernel.dk/blktrace.git
config LSF
bool "Support for Large Single Files"
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 1344a0e..5713f7e 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -140,7 +140,7 @@
/* Assume anything <= 4GB can be handled by IOMMU.
Actually some IOMMUs can handle everything, but I don't
know of a way to test this here. */
- if (b_pfn <= (min_t(u64, 0xffffffff, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+ if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
dma = 1;
q->bounce_pfn = max_low_pfn;
#else
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 0f962ec..f4e1006 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1143,24 +1143,37 @@
}
/*
- * Call func for each cic attached to this ioc. Returns number of cic's seen.
+ * Call func for each cic attached to this ioc.
*/
-static unsigned int
+static void
call_for_each_cic(struct io_context *ioc,
void (*func)(struct io_context *, struct cfq_io_context *))
{
struct cfq_io_context *cic;
struct hlist_node *n;
- int called = 0;
rcu_read_lock();
- hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list) {
+ hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list)
func(ioc, cic);
- called++;
- }
rcu_read_unlock();
+}
- return called;
+static void cfq_cic_free_rcu(struct rcu_head *head)
+{
+ struct cfq_io_context *cic;
+
+ cic = container_of(head, struct cfq_io_context, rcu_head);
+
+ kmem_cache_free(cfq_ioc_pool, cic);
+ elv_ioc_count_dec(ioc_count);
+
+ if (ioc_gone && !elv_ioc_count_read(ioc_count))
+ complete(ioc_gone);
+}
+
+static void cfq_cic_free(struct cfq_io_context *cic)
+{
+ call_rcu(&cic->rcu_head, cfq_cic_free_rcu);
}
static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic)
@@ -1174,24 +1187,18 @@
hlist_del_rcu(&cic->cic_list);
spin_unlock_irqrestore(&ioc->lock, flags);
- kmem_cache_free(cfq_ioc_pool, cic);
+ cfq_cic_free(cic);
}
static void cfq_free_io_context(struct io_context *ioc)
{
- int freed;
-
/*
- * ioc->refcount is zero here, so no more cic's are allowed to be
- * linked into this ioc. So it should be ok to iterate over the known
- * list, we will see all cic's since no new ones are added.
+ * ioc->refcount is zero here, or we are called from elv_unregister(),
+ * so no more cic's are allowed to be linked into this ioc. So it
+ * should be ok to iterate over the known list, we will see all cic's
+ * since no new ones are added.
*/
- freed = call_for_each_cic(ioc, cic_free_func);
-
- elv_ioc_count_mod(ioc_count, -freed);
-
- if (ioc_gone && !elv_ioc_count_read(ioc_count))
- complete(ioc_gone);
+ call_for_each_cic(ioc, cic_free_func);
}
static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
@@ -1207,6 +1214,8 @@
static void __cfq_exit_single_io_context(struct cfq_data *cfqd,
struct cfq_io_context *cic)
{
+ struct io_context *ioc = cic->ioc;
+
list_del_init(&cic->queue_list);
/*
@@ -1216,6 +1225,9 @@
cic->dead_key = (unsigned long) cic->key;
cic->key = NULL;
+ if (ioc->ioc_data == cic)
+ rcu_assign_pointer(ioc->ioc_data, NULL);
+
if (cic->cfqq[ASYNC]) {
cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]);
cic->cfqq[ASYNC] = NULL;
@@ -1248,7 +1260,6 @@
*/
static void cfq_exit_io_context(struct io_context *ioc)
{
- rcu_assign_pointer(ioc->ioc_data, NULL);
call_for_each_cic(ioc, cfq_exit_single_io_context);
}
@@ -1458,15 +1469,6 @@
return cfqq;
}
-static void cfq_cic_free(struct cfq_io_context *cic)
-{
- kmem_cache_free(cfq_ioc_pool, cic);
- elv_ioc_count_dec(ioc_count);
-
- if (ioc_gone && !elv_ioc_count_read(ioc_count))
- complete(ioc_gone);
-}
-
/*
* We drop cfq io contexts lazily, so we may find a dead one.
*/
@@ -1480,8 +1482,7 @@
spin_lock_irqsave(&ioc->lock, flags);
- if (ioc->ioc_data == cic)
- rcu_assign_pointer(ioc->ioc_data, NULL);
+ BUG_ON(ioc->ioc_data == cic);
radix_tree_delete(&ioc->radix_root, (unsigned long) cfqd);
hlist_del_rcu(&cic->cic_list);
@@ -2138,7 +2139,7 @@
if (!cfq_pool)
goto fail;
- cfq_ioc_pool = KMEM_CACHE(cfq_io_context, SLAB_DESTROY_BY_RCU);
+ cfq_ioc_pool = KMEM_CACHE(cfq_io_context, 0);
if (!cfq_ioc_pool)
goto fail;
@@ -2286,7 +2287,6 @@
smp_wmb();
if (elv_ioc_count_read(ioc_count))
wait_for_completion(ioc_gone);
- synchronize_rcu();
cfq_slab_kill();
}
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index b733732..c70d0b6 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -624,7 +624,6 @@
case HDIO_GET_IDENTITY:
case HDIO_DRIVE_TASK:
case HDIO_DRIVE_CMD:
- case HDIO_SCAN_HWIF:
/* 0x330 is reserved -- it used to be HDIO_GETGEO_BIG */
case 0x330:
/* 0x02 -- Floppy ioctls */
diff --git a/crypto/async_tx/async_memcpy.c b/crypto/async_tx/async_memcpy.c
index 84caa4e..a5eda80 100644
--- a/crypto/async_tx/async_memcpy.c
+++ b/crypto/async_tx/async_memcpy.c
@@ -77,7 +77,7 @@
/* if ack is already set then we cannot be sure
* we are referring to the correct operation
*/
- BUG_ON(depend_tx->ack);
+ BUG_ON(async_tx_test_ack(depend_tx));
if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
panic("%s: DMA_ERROR waiting for depend_tx\n",
__func__);
diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c
index 2be3bae..c6e772f 100644
--- a/crypto/async_tx/async_tx.c
+++ b/crypto/async_tx/async_tx.c
@@ -89,13 +89,19 @@
iter = tx;
/* find the root of the unsubmitted dependency chain */
- while (iter->cookie == -EBUSY) {
+ do {
parent = iter->parent;
- if (parent && parent->cookie == -EBUSY)
- iter = iter->parent;
- else
+ if (!parent)
break;
- }
+ else
+ iter = parent;
+ } while (parent);
+
+ /* there is a small window for ->parent == NULL and
+ * ->cookie == -EBUSY
+ */
+ while (iter->cookie == -EBUSY)
+ cpu_relax();
status = dma_sync_wait(iter->chan, iter->cookie);
} while (status == DMA_IN_PROGRESS || (iter != tx));
@@ -111,24 +117,33 @@
void
async_tx_run_dependencies(struct dma_async_tx_descriptor *tx)
{
- struct dma_async_tx_descriptor *dep_tx, *_dep_tx;
- struct dma_device *dev;
+ struct dma_async_tx_descriptor *next = tx->next;
struct dma_chan *chan;
- list_for_each_entry_safe(dep_tx, _dep_tx, &tx->depend_list,
- depend_node) {
- chan = dep_tx->chan;
- dev = chan->device;
- /* we can't depend on ourselves */
- BUG_ON(chan == tx->chan);
- list_del(&dep_tx->depend_node);
- tx->tx_submit(dep_tx);
+ if (!next)
+ return;
- /* we need to poke the engine as client code does not
- * know about dependency submission events
- */
- dev->device_issue_pending(chan);
+ tx->next = NULL;
+ chan = next->chan;
+
+ /* keep submitting up until a channel switch is detected
+ * in that case we will be called again as a result of
+ * processing the interrupt from async_tx_channel_switch
+ */
+ while (next && next->chan == chan) {
+ struct dma_async_tx_descriptor *_next;
+
+ spin_lock_bh(&next->lock);
+ next->parent = NULL;
+ _next = next->next;
+ next->next = NULL;
+ spin_unlock_bh(&next->lock);
+
+ next->tx_submit(next);
+ next = _next;
}
+
+ chan->device->device_issue_pending(chan);
}
EXPORT_SYMBOL_GPL(async_tx_run_dependencies);
@@ -397,6 +412,92 @@
}
#endif
+
+/**
+ * async_tx_channel_switch - queue an interrupt descriptor with a dependency
+ * pre-attached.
+ * @depend_tx: the operation that must finish before the new operation runs
+ * @tx: the new operation
+ */
+static void
+async_tx_channel_switch(struct dma_async_tx_descriptor *depend_tx,
+ struct dma_async_tx_descriptor *tx)
+{
+ struct dma_chan *chan;
+ struct dma_device *device;
+ struct dma_async_tx_descriptor *intr_tx = (void *) ~0;
+
+ /* first check to see if we can still append to depend_tx */
+ spin_lock_bh(&depend_tx->lock);
+ if (depend_tx->parent && depend_tx->chan == tx->chan) {
+ tx->parent = depend_tx;
+ depend_tx->next = tx;
+ intr_tx = NULL;
+ }
+ spin_unlock_bh(&depend_tx->lock);
+
+ if (!intr_tx)
+ return;
+
+ chan = depend_tx->chan;
+ device = chan->device;
+
+ /* see if we can schedule an interrupt
+ * otherwise poll for completion
+ */
+ if (dma_has_cap(DMA_INTERRUPT, device->cap_mask))
+ intr_tx = device->device_prep_dma_interrupt(chan, 0);
+ else
+ intr_tx = NULL;
+
+ if (intr_tx) {
+ intr_tx->callback = NULL;
+ intr_tx->callback_param = NULL;
+ tx->parent = intr_tx;
+ /* safe to set ->next outside the lock since we know we are
+ * not submitted yet
+ */
+ intr_tx->next = tx;
+
+ /* check if we need to append */
+ spin_lock_bh(&depend_tx->lock);
+ if (depend_tx->parent) {
+ intr_tx->parent = depend_tx;
+ depend_tx->next = intr_tx;
+ async_tx_ack(intr_tx);
+ intr_tx = NULL;
+ }
+ spin_unlock_bh(&depend_tx->lock);
+
+ if (intr_tx) {
+ intr_tx->parent = NULL;
+ intr_tx->tx_submit(intr_tx);
+ async_tx_ack(intr_tx);
+ }
+ } else {
+ if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
+ panic("%s: DMA_ERROR waiting for depend_tx\n",
+ __func__);
+ tx->tx_submit(tx);
+ }
+}
+
+
+/**
+ * submit_disposition - while holding depend_tx->lock we must avoid submitting
+ * new operations to prevent a circular locking dependency with
+ * drivers that already hold a channel lock when calling
+ * async_tx_run_dependencies.
+ * @ASYNC_TX_SUBMITTED: we were able to append the new operation under the lock
+ * @ASYNC_TX_CHANNEL_SWITCH: when the lock is dropped schedule a channel switch
+ * @ASYNC_TX_DIRECT_SUBMIT: when the lock is dropped submit directly
+ */
+enum submit_disposition {
+ ASYNC_TX_SUBMITTED,
+ ASYNC_TX_CHANNEL_SWITCH,
+ ASYNC_TX_DIRECT_SUBMIT,
+};
+
void
async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx,
enum async_tx_flags flags, struct dma_async_tx_descriptor *depend_tx,
@@ -405,28 +506,55 @@
tx->callback = cb_fn;
tx->callback_param = cb_param;
- /* set this new tx to run after depend_tx if:
- * 1/ a dependency exists (depend_tx is !NULL)
- * 2/ the tx can not be submitted to the current channel
- */
- if (depend_tx && depend_tx->chan != chan) {
- /* if ack is already set then we cannot be sure
- * we are referring to the correct operation
- */
- BUG_ON(depend_tx->ack);
+ if (depend_tx) {
+ enum submit_disposition s;
- tx->parent = depend_tx;
+ /* sanity check the dependency chain:
+ * 1/ if ack is already set then we cannot be sure
+ * we are referring to the correct operation
+ * 2/ dependencies are 1:1 i.e. two transactions can
+ * not depend on the same parent
+ */
+ BUG_ON(async_tx_test_ack(depend_tx) || depend_tx->next ||
+ tx->parent);
+
+ /* the lock prevents async_tx_run_dependencies from missing
+ * the setting of ->next when ->parent != NULL
+ */
spin_lock_bh(&depend_tx->lock);
- list_add_tail(&tx->depend_node, &depend_tx->depend_list);
- if (depend_tx->cookie == 0) {
- struct dma_chan *dep_chan = depend_tx->chan;
- struct dma_device *dep_dev = dep_chan->device;
- dep_dev->device_dependency_added(dep_chan);
+ if (depend_tx->parent) {
+ /* we have a parent so we can not submit directly
+ * if we are staying on the same channel: append
+ * else: channel switch
+ */
+ if (depend_tx->chan == chan) {
+ tx->parent = depend_tx;
+ depend_tx->next = tx;
+ s = ASYNC_TX_SUBMITTED;
+ } else
+ s = ASYNC_TX_CHANNEL_SWITCH;
+ } else {
+ /* we do not have a parent so we may be able to submit
+ * directly if we are staying on the same channel
+ */
+ if (depend_tx->chan == chan)
+ s = ASYNC_TX_DIRECT_SUBMIT;
+ else
+ s = ASYNC_TX_CHANNEL_SWITCH;
}
spin_unlock_bh(&depend_tx->lock);
- /* schedule an interrupt to trigger the channel switch */
- async_trigger_callback(ASYNC_TX_ACK, depend_tx, NULL, NULL);
+ switch (s) {
+ case ASYNC_TX_SUBMITTED:
+ break;
+ case ASYNC_TX_CHANNEL_SWITCH:
+ async_tx_channel_switch(depend_tx, tx);
+ break;
+ case ASYNC_TX_DIRECT_SUBMIT:
+ tx->parent = NULL;
+ tx->tx_submit(tx);
+ break;
+ }
} else {
tx->parent = NULL;
tx->tx_submit(tx);
@@ -467,7 +595,7 @@
if (device && !dma_has_cap(DMA_INTERRUPT, device->cap_mask))
device = NULL;
- tx = device ? device->device_prep_dma_interrupt(chan) : NULL;
+ tx = device ? device->device_prep_dma_interrupt(chan, 0) : NULL;
} else
tx = NULL;
@@ -483,7 +611,7 @@
/* if ack is already set then we cannot be sure
* we are referring to the correct operation
*/
- BUG_ON(depend_tx->ack);
+ BUG_ON(async_tx_test_ack(depend_tx));
if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
panic("%s: DMA_ERROR waiting for depend_tx\n",
__func__);
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 1c445c7..3a0dddc 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -191,7 +191,7 @@
/* if ack is already set then we cannot be sure
* we are referring to the correct operation
*/
- BUG_ON(depend_tx->ack);
+ BUG_ON(async_tx_test_ack(depend_tx));
if (dma_wait_for_async_tx(depend_tx) ==
DMA_ERROR)
panic("%s: DMA_ERROR waiting for "
diff --git a/crypto/xcbc.c b/crypto/xcbc.c
index 2feb0f23..b63b633 100644
--- a/crypto/xcbc.c
+++ b/crypto/xcbc.c
@@ -116,13 +116,11 @@
struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent);
struct crypto_cipher *tfm = ctx->child;
int bs = crypto_hash_blocksize(parent);
- unsigned int i = 0;
- do {
-
- struct page *pg = sg_page(&sg[i]);
- unsigned int offset = sg[i].offset;
- unsigned int slen = sg[i].length;
+ for (;;) {
+ struct page *pg = sg_page(sg);
+ unsigned int offset = sg->offset;
+ unsigned int slen = sg->length;
if (unlikely(slen > nbytes))
slen = nbytes;
@@ -182,8 +180,11 @@
offset = 0;
pg++;
}
- i++;
- } while (nbytes>0);
+
+ if (!nbytes)
+ break;
+ sg = scatterwalk_sg_next(sg);
+ }
return 0;
}
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 5b6760e..2d1955c 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -373,10 +373,11 @@
}
spin_lock_irqsave(&acpi_bus_event_lock, flags);
- entry =
- list_entry(acpi_bus_event_list.next, struct acpi_bus_event, node);
- if (entry)
+ if (!list_empty(&acpi_bus_event_list)) {
+ entry = list_entry(acpi_bus_event_list.next,
+ struct acpi_bus_event, node);
list_del(&entry->node);
+ }
spin_unlock_irqrestore(&acpi_bus_event_lock, flags);
if (!entry)
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index a697fb6..a498a6c 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -4,6 +4,8 @@
* Copyright (C) 2000 Andrew Henroid
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ * Copyright (c) 2008 Intel Corporation
+ * Author: Matthew Wilcox <willy@linux.intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
@@ -37,15 +39,18 @@
#include <linux/workqueue.h>
#include <linux/nmi.h>
#include <linux/acpi.h>
-#include <acpi/acpi.h>
-#include <asm/io.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/processor.h>
-#include <asm/uaccess.h>
-
#include <linux/efi.h>
#include <linux/ioport.h>
#include <linux/list.h>
+#include <linux/jiffies.h>
+#include <linux/semaphore.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/processor.h>
#define _COMPONENT ACPI_OS_SERVICES
ACPI_MODULE_NAME("osl");
@@ -764,7 +769,6 @@
{
struct semaphore *sem = NULL;
-
sem = acpi_os_allocate(sizeof(struct semaphore));
if (!sem)
return AE_NO_MEMORY;
@@ -791,12 +795,12 @@
{
struct semaphore *sem = (struct semaphore *)handle;
-
if (!sem)
return AE_BAD_PARAMETER;
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Deleting semaphore[%p].\n", handle));
+ BUG_ON(!list_empty(&sem->wait_list));
kfree(sem);
sem = NULL;
@@ -804,21 +808,15 @@
}
/*
- * TODO: The kernel doesn't have a 'down_timeout' function -- had to
- * improvise. The process is to sleep for one scheduler quantum
- * until the semaphore becomes available. Downside is that this
- * may result in starvation for timeout-based waits when there's
- * lots of semaphore activity.
- *
* TODO: Support for units > 1?
*/
acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout)
{
acpi_status status = AE_OK;
struct semaphore *sem = (struct semaphore *)handle;
+ long jiffies;
int ret = 0;
-
if (!sem || (units < 1))
return AE_BAD_PARAMETER;
@@ -828,58 +826,14 @@
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Waiting for semaphore[%p|%d|%d]\n",
handle, units, timeout));
- /*
- * This can be called during resume with interrupts off.
- * Like boot-time, we should be single threaded and will
- * always get the lock if we try -- timeout or not.
- * If this doesn't succeed, then we will oops courtesy of
- * might_sleep() in down().
- */
- if (!down_trylock(sem))
- return AE_OK;
-
- switch (timeout) {
- /*
- * No Wait:
- * --------
- * A zero timeout value indicates that we shouldn't wait - just
- * acquire the semaphore if available otherwise return AE_TIME
- * (a.k.a. 'would block').
- */
- case 0:
- if (down_trylock(sem))
- status = AE_TIME;
- break;
-
- /*
- * Wait Indefinitely:
- * ------------------
- */
- case ACPI_WAIT_FOREVER:
- down(sem);
- break;
-
- /*
- * Wait w/ Timeout:
- * ----------------
- */
- default:
- // TODO: A better timeout algorithm?
- {
- int i = 0;
- static const int quantum_ms = 1000 / HZ;
-
- ret = down_trylock(sem);
- for (i = timeout; (i > 0 && ret != 0); i -= quantum_ms) {
- schedule_timeout_interruptible(1);
- ret = down_trylock(sem);
- }
-
- if (ret != 0)
- status = AE_TIME;
- }
- break;
- }
+ if (timeout == ACPI_WAIT_FOREVER)
+ jiffies = MAX_SCHEDULE_TIMEOUT;
+ else
+ jiffies = msecs_to_jiffies(timeout);
+
+ ret = down_timeout(sem, jiffies);
+ if (ret)
+ status = AE_TIME;
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
@@ -902,7 +856,6 @@
{
struct semaphore *sem = (struct semaphore *)handle;
-
if (!sem || (units < 1))
return AE_BAD_PARAMETER;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 36a68fa..a825b43 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -822,7 +822,7 @@
}
processors[pr->id] = NULL;
-
+ processor_device_array[pr->id] = NULL;
kfree(pr);
return 0;
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index d2f71a5..71183ee 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -26,21 +26,6 @@
#ifdef CONFIG_PM_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-static bool acpi_sleep_finish_wake_up;
-
-/*
- * ACPI 2.0 and later want us to execute _PTS after suspending devices, so we
- * allow the user to request that behavior by using the 'acpi_new_pts_ordering'
- * kernel command line option that causes the following variable to be set.
- */
-static bool new_pts_ordering;
-
-static int __init acpi_new_pts_ordering(char *str)
-{
- new_pts_ordering = true;
- return 1;
-}
-__setup("acpi_new_pts_ordering", acpi_new_pts_ordering);
#endif
static int acpi_sleep_prepare(u32 acpi_state)
@@ -91,14 +76,6 @@
if (sleep_states[acpi_state]) {
acpi_target_sleep_state = acpi_state;
- if (new_pts_ordering)
- return 0;
-
- error = acpi_sleep_prepare(acpi_state);
- if (error)
- acpi_target_sleep_state = ACPI_STATE_S0;
- else
- acpi_sleep_finish_wake_up = true;
} else {
printk(KERN_ERR "ACPI does not support this state: %d\n",
pm_state);
@@ -116,14 +93,11 @@
static int acpi_pm_prepare(void)
{
- if (new_pts_ordering) {
- int error = acpi_sleep_prepare(acpi_target_sleep_state);
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
- acpi_sleep_finish_wake_up = true;
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
}
return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
@@ -212,7 +186,6 @@
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
- acpi_sleep_finish_wake_up = false;
#ifdef CONFIG_X86
if (init_8259A_after_S1) {
@@ -229,11 +202,10 @@
static void acpi_pm_end(void)
{
/*
- * This is necessary in case acpi_pm_finish() is not called directly
- * during a failing transition to a sleep state.
+ * This is necessary in case acpi_pm_finish() is not called during a
+ * failing transition to a sleep state.
*/
- if (acpi_sleep_finish_wake_up)
- acpi_pm_finish();
+ acpi_target_sleep_state = ACPI_STATE_S0;
}
static int acpi_pm_state_valid(suspend_state_t pm_state)
@@ -285,31 +257,18 @@
#ifdef CONFIG_HIBERNATION
static int acpi_hibernation_begin(void)
{
- int error;
-
acpi_target_sleep_state = ACPI_STATE_S4;
- if (new_pts_ordering)
- return 0;
- error = acpi_sleep_prepare(ACPI_STATE_S4);
- if (error)
- acpi_target_sleep_state = ACPI_STATE_S0;
- else
- acpi_sleep_finish_wake_up = true;
-
- return error;
+ return 0;
}
static int acpi_hibernation_prepare(void)
{
- if (new_pts_ordering) {
- int error = acpi_sleep_prepare(ACPI_STATE_S4);
+ int error = acpi_sleep_prepare(ACPI_STATE_S4);
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
- acpi_sleep_finish_wake_up = true;
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
}
return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
@@ -353,17 +312,15 @@
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
- acpi_sleep_finish_wake_up = false;
}
static void acpi_hibernation_end(void)
{
/*
* This is necessary in case acpi_hibernation_finish() is not called
- * directly during a failing transition to the sleep state.
+ * during a failing transition to the sleep state.
*/
- if (acpi_sleep_finish_wake_up)
- acpi_hibernation_finish();
+ acpi_target_sleep_state = ACPI_STATE_S0;
}
static int acpi_hibernation_pre_restore(void)
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index c4e00ac..1bcecc7 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -1125,7 +1125,7 @@
tz->trips.active[i].flags.valid; i++, trips++);
tz->thermal_zone = thermal_zone_device_register("ACPI thermal zone",
trips, tz, &acpi_thermal_zone_ops);
- if (!tz->thermal_zone)
+ if (IS_ERR(tz->thermal_zone))
return -ENODEV;
result = sysfs_create_link(&tz->device->dev.kobj,
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 12fb44f..980a741 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -713,7 +713,7 @@
kfree(obj);
- if (device->cap._BCL && device->cap._BCM && max_level > 0) {
+ if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){
int result;
static int count = 0;
char *name;
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 25aba69..292aa9a 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -28,7 +28,7 @@
default n
config ATA_ACPI
- bool
+ bool "ATA ACPI Support"
depends on ACPI && PCI
select ACPI_DOCK
default y
@@ -41,6 +41,13 @@
You can disable this at kernel boot time by using the
option libata.noacpi=1
+config SATA_PMP
+ bool "SATA Port Multiplier support"
+ default y
+ help
+ This option adds support for SATA Port Multipliers
+ (the SATA version of an ethernet hub, or SAS expander).
+
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
@@ -49,6 +56,43 @@
If unsure, say N.
+config SATA_SIL24
+ tristate "Silicon Image 3124/3132 SATA support"
+ depends on PCI
+ help
+ This option enables support for Silicon Image 3124/3132 Serial ATA.
+
+ If unsure, say N.
+
+config SATA_FSL
+ tristate "Freescale 3.0Gbps SATA support"
+ depends on FSL_SOC
+ help
+ This option enables support for Freescale 3.0Gbps SATA controller.
+ It can be found on MPC837x and MPC8315.
+
+ If unsure, say N.
+
+config ATA_SFF
+ bool "ATA SFF support"
+ default y
+ help
+ This option adds support for ATA controllers with SFF
+ compliant or similar programming interface.
+
+ SFF is the legacy IDE interface that has been around since
+ the dawn of time. Almost all PATA controllers have an
+ SFF interface. Many SATA controllers have an SFF interface
+ when configured into a legacy compatibility mode.
+
+ For users with exclusively modern controllers like AHCI,
+ Silicon Image 3124, or Marvell 6440, you may choose to
+ disable this uneeded SFF support.
+
+ If unsure, say Y.
+
+if ATA_SFF
+
config SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
depends on PCI
@@ -125,14 +169,6 @@
If unsure, say N.
-config SATA_SIL24
- tristate "Silicon Image 3124/3132 SATA support"
- depends on PCI
- help
- This option enables support for Silicon Image 3124/3132 Serial ATA.
-
- If unsure, say N.
-
config SATA_SIS
tristate "SiS 964/965/966/180 SATA support"
depends on PCI
@@ -183,15 +219,6 @@
firmware in the BIOS. This driver can sometimes handle
otherwise unsupported hardware.
-config SATA_FSL
- tristate "Freescale 3.0Gbps SATA support"
- depends on FSL_SOC
- help
- This option enables support for Freescale 3.0Gbps SATA controller.
- It can be found on MPC837x and MPC8315.
-
- If unsure, say N.
-
config PATA_ALI
tristate "ALi PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
@@ -679,4 +706,5 @@
If unsure, say N.
+endif # ATA_SFF
endif # ATA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 0511e6f..1fbc2aa 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -78,6 +78,7 @@
# Should be last libata driver
obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o
-libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o \
- libata-pmp.o
+libata-objs := libata-core.o libata-scsi.o libata-eh.o
+libata-$(CONFIG_ATA_SFF) += libata-sff.o
+libata-$(CONFIG_SATA_PMP) += libata-pmp.o
libata-$(CONFIG_ATA_ACPI) += libata-acpi.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b1eb4e2..739ba3f 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -62,7 +62,6 @@
AHCI_MAX_PORTS = 32,
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
- AHCI_USE_CLUSTERING = 1,
AHCI_MAX_CMDS = 32,
AHCI_CMD_SZ = 32,
AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
@@ -198,7 +197,6 @@
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
ATA_FLAG_IPM,
- AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY,
ICH_MAP = 0x90, /* ICH MAP register */
};
@@ -245,19 +243,24 @@
static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
-static void ahci_irq_clear(struct ata_port *ap);
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
static int ahci_port_start(struct ata_port *ap);
static void ahci_port_stop(struct ata_port *ap);
-static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
-static u8 ahci_check_status(struct ata_port *ap);
static void ahci_freeze(struct ata_port *ap);
static void ahci_thaw(struct ata_port *ap);
static void ahci_pmp_attach(struct ata_port *ap);
static void ahci_pmp_detach(struct ata_port *ap);
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static void ahci_postreset(struct ata_link *link, unsigned int *class);
static void ahci_error_handler(struct ata_port *ap);
-static void ahci_vt8251_error_handler(struct ata_port *ap);
-static void ahci_p5wdh_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
static int ahci_port_resume(struct ata_port *ap);
static void ahci_dev_config(struct ata_device *dev);
@@ -276,129 +279,54 @@
};
static struct scsi_host_template ahci_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .change_queue_depth = ata_scsi_change_queue_depth,
+ ATA_NCQ_SHT(DRV_NAME),
.can_queue = AHCI_MAX_CMDS - 1,
- .this_id = ATA_SHT_THIS_ID,
.sg_tablesize = AHCI_MAX_SG,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = AHCI_USE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = AHCI_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
.shost_attrs = ahci_shost_attrs,
};
-static const struct ata_port_operations ahci_ops = {
- .check_status = ahci_check_status,
- .check_altstatus = ahci_check_status,
- .dev_select = ata_noop_dev_select,
-
- .dev_config = ahci_dev_config,
-
- .tf_read = ahci_tf_read,
+static struct ata_port_operations ahci_ops = {
+ .inherits = &sata_pmp_port_ops,
.qc_defer = sata_pmp_qc_defer_cmd_switch,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
-
- .irq_clear = ahci_irq_clear,
-
- .scr_read = ahci_scr_read,
- .scr_write = ahci_scr_write,
+ .qc_fill_rtf = ahci_qc_fill_rtf,
.freeze = ahci_freeze,
.thaw = ahci_thaw,
-
+ .softreset = ahci_softreset,
+ .hardreset = ahci_hardreset,
+ .postreset = ahci_postreset,
+ .pmp_softreset = ahci_softreset,
.error_handler = ahci_error_handler,
.post_internal_cmd = ahci_post_internal_cmd,
+ .dev_config = ahci_dev_config,
+ .scr_read = ahci_scr_read,
+ .scr_write = ahci_scr_write,
.pmp_attach = ahci_pmp_attach,
.pmp_detach = ahci_pmp_detach,
-#ifdef CONFIG_PM
- .port_suspend = ahci_port_suspend,
- .port_resume = ahci_port_resume,
-#endif
.enable_pm = ahci_enable_alpm,
.disable_pm = ahci_disable_alpm,
-
- .port_start = ahci_port_start,
- .port_stop = ahci_port_stop,
-};
-
-static const struct ata_port_operations ahci_vt8251_ops = {
- .check_status = ahci_check_status,
- .check_altstatus = ahci_check_status,
- .dev_select = ata_noop_dev_select,
-
- .tf_read = ahci_tf_read,
-
- .qc_defer = sata_pmp_qc_defer_cmd_switch,
- .qc_prep = ahci_qc_prep,
- .qc_issue = ahci_qc_issue,
-
- .irq_clear = ahci_irq_clear,
-
- .scr_read = ahci_scr_read,
- .scr_write = ahci_scr_write,
-
- .freeze = ahci_freeze,
- .thaw = ahci_thaw,
-
- .error_handler = ahci_vt8251_error_handler,
- .post_internal_cmd = ahci_post_internal_cmd,
-
- .pmp_attach = ahci_pmp_attach,
- .pmp_detach = ahci_pmp_detach,
-
#ifdef CONFIG_PM
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
#endif
-
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
};
-static const struct ata_port_operations ahci_p5wdh_ops = {
- .check_status = ahci_check_status,
- .check_altstatus = ahci_check_status,
- .dev_select = ata_noop_dev_select,
+static struct ata_port_operations ahci_vt8251_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = ahci_vt8251_hardreset,
+};
- .tf_read = ahci_tf_read,
-
- .qc_defer = sata_pmp_qc_defer_cmd_switch,
- .qc_prep = ahci_qc_prep,
- .qc_issue = ahci_qc_issue,
-
- .irq_clear = ahci_irq_clear,
-
- .scr_read = ahci_scr_read,
- .scr_write = ahci_scr_write,
-
- .freeze = ahci_freeze,
- .thaw = ahci_thaw,
-
- .error_handler = ahci_p5wdh_error_handler,
- .post_internal_cmd = ahci_post_internal_cmd,
-
- .pmp_attach = ahci_pmp_attach,
- .pmp_detach = ahci_pmp_detach,
-
-#ifdef CONFIG_PM
- .port_suspend = ahci_port_suspend,
- .port_resume = ahci_port_resume,
-#endif
-
- .port_start = ahci_port_start,
- .port_stop = ahci_port_stop,
+static struct ata_port_operations ahci_p5wdh_ops = {
+ .inherits = &ahci_ops,
+ .hardreset = ahci_p5wdh_hardreset,
};
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
@@ -407,7 +335,6 @@
/* board_ahci */
{
.flags = AHCI_FLAG_COMMON,
- .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@@ -416,7 +343,6 @@
{
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
- .link_flags = AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_vt8251_ops,
@@ -425,7 +351,6 @@
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
.flags = AHCI_FLAG_COMMON,
- .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@@ -436,7 +361,6 @@
AHCI_HFLAG_32BIT_ONLY |
AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
- .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@@ -447,7 +371,6 @@
AHCI_HFLAG_MV_PATA),
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
- .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@@ -457,7 +380,6 @@
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
- .link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@@ -1255,13 +1177,14 @@
static int ahci_kick_engine(struct ata_port *ap, int force_restart)
{
- void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+ void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_host_priv *hpriv = ap->host->private_data;
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
u32 tmp;
int busy, rc;
/* do we need to kick the port? */
- busy = ahci_check_status(ap) & (ATA_BUSY | ATA_DRQ);
+ busy = status & (ATA_BUSY | ATA_DRQ);
if (!busy && !force_restart)
return 0;
@@ -1328,10 +1251,21 @@
return 0;
}
-static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
- int pmp, unsigned long deadline)
+static int ahci_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+
+ if (!(status & ATA_BUSY))
+ return 1;
+ return 0;
+}
+
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
+ int pmp = sata_srst_pmp(link);
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
@@ -1339,12 +1273,6 @@
DPRINTK("ENTER\n");
- if (ata_link_offline(link)) {
- DPRINTK("PHY reports no device\n");
- *class = ATA_DEV_NONE;
- return 0;
- }
-
/* prepare for SRST (AHCI-1.1 10.4.1) */
rc = ahci_kick_engine(ap, 1);
if (rc && rc != -EOPNOTSUPP)
@@ -1374,10 +1302,8 @@
tf.ctl &= ~ATA_SRST;
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
- /* wait a while before checking status */
- ata_wait_after_reset(ap, deadline);
-
- rc = ata_wait_ready(ap, deadline);
+ /* wait for link to become ready */
+ rc = ata_wait_after_reset(link, deadline, ahci_check_ready);
/* link occupied, -ENODEV too is an error */
if (rc) {
reason = "device not ready";
@@ -1393,24 +1319,15 @@
return rc;
}
-static int ahci_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- int pmp = 0;
-
- if (link->ap->flags & ATA_FLAG_PMP)
- pmp = SATA_PMP_CTRL_PORT;
-
- return ahci_do_softreset(link, class, pmp, deadline);
-}
-
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
+ const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
+ bool online;
int rc;
DPRINTK("ENTER\n");
@@ -1422,14 +1339,13 @@
tf.command = 0x80;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
- rc = sata_std_hardreset(link, class, deadline);
+ rc = sata_link_hardreset(link, timing, deadline, &online,
+ ahci_check_ready);
ahci_start_engine(ap);
- if (rc == 0 && ata_link_online(link))
+ if (online)
*class = ahci_dev_classify(ap);
- if (rc != -EAGAIN && *class == ATA_DEV_UNKNOWN)
- *class = ATA_DEV_NONE;
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
return rc;
@@ -1439,7 +1355,7 @@
unsigned long deadline)
{
struct ata_port *ap = link->ap;
- u32 serror;
+ bool online;
int rc;
DPRINTK("ENTER\n");
@@ -1447,11 +1363,7 @@
ahci_stop_engine(ap);
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
- deadline);
-
- /* vt8251 needs SError cleared for the port to operate */
- ahci_scr_read(ap, SCR_ERROR, &serror);
- ahci_scr_write(ap, SCR_ERROR, serror);
+ deadline, &online, NULL);
ahci_start_engine(ap);
@@ -1460,7 +1372,7 @@
/* vt8251 doesn't clear BSY on signature FIS reception,
* request follow-up softreset.
*/
- return rc ?: -EAGAIN;
+ return online ? -EAGAIN : rc;
}
static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
@@ -1470,6 +1382,7 @@
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
+ bool online;
int rc;
ahci_stop_engine(ap);
@@ -1480,16 +1393,10 @@
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
- deadline);
+ deadline, &online, NULL);
ahci_start_engine(ap);
- if (rc || ata_link_offline(link))
- return rc;
-
- /* spec mandates ">= 2ms" before checking status */
- msleep(150);
-
/* The pseudo configuration device on SIMG4726 attached to
* ASUS P5W-DH Deluxe doesn't send signature FIS after
* hardreset if no device is attached to the first downstream
@@ -1503,11 +1410,13 @@
* have to be reset again. For most cases, this should
* suffice while making probing snappish enough.
*/
- rc = ata_wait_ready(ap, jiffies + 2 * HZ);
- if (rc)
- ahci_kick_engine(ap, 0);
-
- return 0;
+ if (online) {
+ rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
+ ahci_check_ready);
+ if (rc)
+ ahci_kick_engine(ap, 0);
+ }
+ return rc;
}
static void ahci_postreset(struct ata_link *link, unsigned int *class)
@@ -1530,27 +1439,6 @@
}
}
-static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- return ahci_do_softreset(link, class, link->pmp, deadline);
-}
-
-static u8 ahci_check_status(struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.cmd_addr;
-
- return readl(mmio + PORT_TFDATA) & 0xFF;
-}
-
-static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct ahci_port_priv *pp = ap->private_data;
- u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
-
- ata_tf_from_fis(d2h_fis, tf);
-}
-
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
{
struct scatterlist *sg;
@@ -1663,27 +1551,27 @@
u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
active_ehi->err_mask |= AC_ERR_HSM;
- active_ehi->action |= ATA_EH_SOFTRESET;
+ active_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(active_ehi,
"unknown FIS %08x %08x %08x %08x" ,
unk[0], unk[1], unk[2], unk[3]);
}
- if (ap->nr_pmp_links && (irq_stat & PORT_IRQ_BAD_PMP)) {
+ if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
active_ehi->err_mask |= AC_ERR_HSM;
- active_ehi->action |= ATA_EH_SOFTRESET;
+ active_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(active_ehi, "incorrect PMP");
}
if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
host_ehi->err_mask |= AC_ERR_HOST_BUS;
- host_ehi->action |= ATA_EH_SOFTRESET;
+ host_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(host_ehi, "host bus error");
}
if (irq_stat & PORT_IRQ_IF_ERR) {
host_ehi->err_mask |= AC_ERR_ATA_BUS;
- host_ehi->action |= ATA_EH_SOFTRESET;
+ host_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(host_ehi, "interface fatal error");
}
@@ -1704,7 +1592,7 @@
static void ahci_port_intr(struct ata_port *ap)
{
- void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+ void __iomem *port_mmio = ahci_port_base(ap);
struct ata_eh_info *ehi = &ap->link.eh_info;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_host_priv *hpriv = ap->host->private_data;
@@ -1766,21 +1654,16 @@
else
qc_active = readl(port_mmio + PORT_CMD_ISSUE);
- rc = ata_qc_complete_multiple(ap, qc_active, NULL);
+ rc = ata_qc_complete_multiple(ap, qc_active);
/* while resetting, invalid completions are expected */
if (unlikely(rc < 0 && !resetting)) {
ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
}
}
-static void ahci_irq_clear(struct ata_port *ap)
-{
- /* TODO */
-}
-
static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
@@ -1854,6 +1737,15 @@
return 0;
}
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ struct ahci_port_priv *pp = qc->ap->private_data;
+ u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+
+ ata_tf_from_fis(d2h_fis, &qc->result_tf);
+ return true;
+}
+
static void ahci_freeze(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
@@ -1886,37 +1778,7 @@
ahci_start_engine(ap);
}
- /* perform recovery */
- sata_pmp_do_eh(ap, ata_std_prereset, ahci_softreset,
- ahci_hardreset, ahci_postreset,
- sata_pmp_std_prereset, ahci_pmp_softreset,
- sata_pmp_std_hardreset, sata_pmp_std_postreset);
-}
-
-static void ahci_vt8251_error_handler(struct ata_port *ap)
-{
- if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
- /* restart engine */
- ahci_stop_engine(ap);
- ahci_start_engine(ap);
- }
-
- /* perform recovery */
- ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_vt8251_hardreset,
- ahci_postreset);
-}
-
-static void ahci_p5wdh_error_handler(struct ata_port *ap)
-{
- if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
- /* restart engine */
- ahci_stop_engine(ap);
- ahci_start_engine(ap);
- }
-
- /* perform recovery */
- ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_p5wdh_hardreset,
- ahci_postreset);
+ sata_pmp_error_handler(ap);
}
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
@@ -1961,7 +1823,7 @@
ahci_power_up(ap);
ahci_start_port(ap);
- if (ap->nr_pmp_links)
+ if (sata_pmp_attached(ap))
ahci_pmp_attach(ap);
else
ahci_pmp_detach(ap);
@@ -2324,7 +2186,6 @@
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- void __iomem *port_mmio = ahci_port_base(ap);
ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
ata_port_pbar_desc(ap, AHCI_PCI_BAR,
@@ -2333,12 +2194,8 @@
/* set initial link pm policy */
ap->pm_policy = NOT_AVAILABLE;
- /* standard SATA port setup */
- if (hpriv->port_map & (1 << i))
- ap->ioaddr.cmd_addr = port_mmio;
-
/* disabled/not-implemented port */
- else
+ if (!(hpriv->port_map & (1 << i)))
ap->ops = &ata_dummy_port_ops;
}
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 2053420..47aeccd 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -95,53 +95,13 @@
}
static struct scsi_host_template generic_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations generic_port_ops = {
- .set_mode = generic_set_mode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_unknown,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_mode = generic_set_mode,
};
static int all_generic_ide; /* Set to claim all devices */
@@ -160,7 +120,6 @@
{
u16 command;
static const struct ata_port_info info = {
- .sht = &generic_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -191,9 +150,9 @@
return -ENODEV;
if (dev->vendor == PCI_VENDOR_ID_AL)
- ata_pci_clear_simplex(dev);
+ ata_pci_bmdma_clear_simplex(dev);
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL);
}
static struct pci_device_id ata_generic[] = {
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index fae8404..b7c38ee 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -100,13 +100,11 @@
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
ICH5_PMR = 0x90, /* port mapping register */
ICH5_PCS = 0x92, /* port control and status */
- PIIX_SCC = 0x0A, /* sub-class code register */
PIIX_SIDPR_BAR = 5,
PIIX_SIDPR_LEN = 16,
PIIX_SIDPR_IDX = 0,
PIIX_SIDPR_DATA = 4,
- PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
PIIX_FLAG_SIDPR = (1 << 29), /* SATA idx/data pair regs */
@@ -140,12 +138,11 @@
ich_pata_100, /* ICH up to UDMA 100 */
ich5_sata,
ich6_sata,
- ich6_sata_ahci,
- ich6m_sata_ahci,
- ich8_sata_ahci,
+ ich6m_sata,
+ ich8_sata,
ich8_2port_sata,
- ich8m_apple_sata_ahci, /* locks up on second port enable */
- tolapai_sata_ahci,
+ ich8m_apple_sata, /* locks up on second port enable */
+ tolapai_sata,
piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
};
@@ -162,7 +159,7 @@
static int piix_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
-static void piix_pata_error_handler(struct ata_port *ap);
+static int piix_pata_prereset(struct ata_link *link, unsigned long deadline);
static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
@@ -170,7 +167,6 @@
static u8 piix_vmw_bmdma_status(struct ata_port *ap);
static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val);
static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val);
-static void piix_sidpr_error_handler(struct ata_port *ap);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
@@ -236,25 +232,27 @@
/* 82801FB/FW (ICH6/ICH6W) */
{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* 82801FR/FRW (ICH6R/ICH6RW) */
- { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
- /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */
- { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+ { 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
+ /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented).
+ * Attach iff the controller is in IDE mode. */
+ { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata },
/* 82801GB/GR/GH (ICH7, identical to ICH6) */
- { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
- { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+ { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata },
/* Enterprise Southbridge 2 (631xESB/632xESB) */
- { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* SATA Controller 1 IDE (ICH8) */
- { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* Mobile SATA Controller IDE (ICH8M) */
- { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* Mobile SATA Controller IDE (ICH8M), Apple */
- { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata_ahci },
+ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
/* SATA Controller IDE (ICH9) */
- { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9) */
@@ -264,15 +262,15 @@
/* SATA Controller IDE (ICH9M) */
{ 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
- { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (Tolapai) */
- { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci },
+ { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata },
/* SATA Controller IDE (ICH10) */
- { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH10) */
{ 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH10) */
- { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
+ { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH10) */
{ 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
@@ -291,170 +289,37 @@
};
static struct scsi_host_template piix_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations piix_pata_ops = {
- .set_piomode = piix_set_piomode,
- .set_dmamode = piix_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = piix_pata_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+static struct ata_port_operations piix_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_40wire,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
-};
-
-static const struct ata_port_operations ich_pata_ops = {
- .set_piomode = piix_set_piomode,
- .set_dmamode = ich_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = piix_pata_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ich_pata_cable_detect,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
-};
-
-static const struct ata_port_operations piix_sata_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
-};
-
-static const struct ata_port_operations piix_vmw_ops = {
.set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode,
- .mode_filter = ata_pci_default_filter,
+ .prereset = piix_pata_prereset,
+};
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
+static struct ata_port_operations piix_vmw_ops = {
+ .inherits = &piix_pata_ops,
.bmdma_status = piix_vmw_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = piix_pata_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
};
-static const struct ata_port_operations piix_sidpr_sata_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
+static struct ata_port_operations ich_pata_ops = {
+ .inherits = &piix_pata_ops,
+ .cable_detect = ich_pata_cable_detect,
+ .set_dmamode = ich_set_dmamode,
+};
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
+static struct ata_port_operations piix_sata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+};
+static struct ata_port_operations piix_sidpr_sata_ops = {
+ .inherits = &piix_sata_ops,
+ .hardreset = sata_std_hardreset,
.scr_read = piix_sidpr_scr_read,
.scr_write = piix_sidpr_scr_write,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = piix_sidpr_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
};
static const struct piix_map_db ich5_map_db = {
@@ -553,12 +418,11 @@
static const struct piix_map_db *piix_map_db_table[] = {
[ich5_sata] = &ich5_map_db,
[ich6_sata] = &ich6_map_db,
- [ich6_sata_ahci] = &ich6_map_db,
- [ich6m_sata_ahci] = &ich6m_map_db,
- [ich8_sata_ahci] = &ich8_map_db,
+ [ich6m_sata] = &ich6m_map_db,
+ [ich8_sata] = &ich8_map_db,
[ich8_2port_sata] = &ich8_2port_map_db,
- [ich8m_apple_sata_ahci] = &ich8m_apple_map_db,
- [tolapai_sata_ahci] = &tolapai_map_db,
+ [ich8m_apple_sata] = &ich8m_apple_map_db,
+ [tolapai_sata] = &tolapai_map_db,
};
static struct ata_port_info piix_port_info[] = {
@@ -624,28 +488,18 @@
.port_ops = &piix_sata_ops,
},
- [ich6_sata_ahci] =
+ [ich6m_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
- [ich6m_sata_ahci] =
+ [ich8_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
- .pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = ATA_UDMA6,
- .port_ops = &piix_sata_ops,
- },
-
- [ich8_sata_ahci] =
- {
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
- PIIX_FLAG_SIDPR,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -654,27 +508,25 @@
[ich8_2port_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
- PIIX_FLAG_SIDPR,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
- [tolapai_sata_ahci] =
+ [tolapai_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
- [ich8m_apple_sata_ahci] =
+ [ich8m_apple_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
- PIIX_FLAG_SIDPR,
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -683,7 +535,6 @@
[piix_pata_vmw] =
{
- .sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
@@ -776,13 +627,7 @@
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-static void piix_pata_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL,
- ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -1168,35 +1013,6 @@
return 0;
}
-static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
- int rc;
-
- /* do hardreset */
- rc = sata_link_hardreset(link, timing, deadline);
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "COMRESET failed (errno=%d)\n", rc);
- return rc;
- }
-
- /* TODO: phy layer with polling, timeouts, etc. */
- if (ata_link_offline(link)) {
- *class = ATA_DEV_NONE;
- return 0;
- }
-
- return -EAGAIN;
-}
-
-static void piix_sidpr_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
- piix_sidpr_hardreset, ata_std_postreset);
-}
-
#ifdef CONFIG_PM
static int piix_broken_suspend(void)
{
@@ -1633,6 +1449,16 @@
if (rc)
return rc;
+ /* ICH6R may be driven by either ata_piix or ahci driver
+ * regardless of BIOS configuration. Make sure AHCI mode is
+ * off.
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
+ int rc = piix_disable_ahci(pdev);
+ if (rc)
+ return rc;
+ }
+
/* SATA map init can change port_info, do it before prepping host */
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
@@ -1642,22 +1468,12 @@
hpriv->map = piix_init_sata_map(pdev, port_info,
piix_map_db_table[ent->driver_data]);
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
host->private_data = hpriv;
/* initialize controller */
- if (port_flags & PIIX_FLAG_AHCI) {
- u8 tmp;
- pci_read_config_byte(pdev, PIIX_SCC, &tmp);
- if (tmp == PIIX_AHCI_DEVICE) {
- rc = piix_disable_ahci(pdev);
- if (rc)
- return rc;
- }
- }
-
if (port_flags & ATA_FLAG_SATA) {
piix_init_pcs(host, piix_map_db_table[ent->driver_data]);
piix_init_sidpr(host);
@@ -1686,7 +1502,7 @@
}
pci_set_master(pdev);
- return ata_pci_activate_sff_host(host, ata_interrupt, &piix_sht);
+ return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
}
static int __init piix_init(void)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index bf98a56..8c1cfc6 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -77,7 +77,7 @@
{
WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA));
- if (!ap->nr_pmp_links) {
+ if (!sata_pmp_attached(ap)) {
acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
ap->link.device->acpi_handle =
@@ -839,7 +839,8 @@
*/
ata_link_for_each_dev(dev, &ap->link) {
ata_acpi_clear_gtf(dev);
- if (ata_dev_get_GTF(dev, NULL) >= 0)
+ if (ata_dev_enabled(dev) &&
+ ata_dev_get_GTF(dev, NULL) >= 0)
dev->flags |= ATA_DFLAG_ACPI_PENDING;
}
} else {
@@ -849,7 +850,8 @@
*/
ata_link_for_each_dev(dev, &ap->link) {
ata_acpi_clear_gtf(dev);
- dev->flags |= ATA_DFLAG_ACPI_PENDING;
+ if (ata_dev_enabled(dev))
+ dev->flags |= ATA_DFLAG_ACPI_PENDING;
}
}
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4851988..733eb94 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -46,7 +46,6 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/mm.h>
-#include <linux/highmem.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
@@ -74,6 +73,19 @@
const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 };
const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 };
+const struct ata_port_operations ata_base_port_ops = {
+ .prereset = ata_std_prereset,
+ .postreset = ata_std_postreset,
+ .error_handler = ata_std_error_handler,
+};
+
+const struct ata_port_operations sata_port_ops = {
+ .inherits = &ata_base_port_ops,
+
+ .qc_defer = ata_std_qc_defer,
+ .hardreset = sata_std_hardreset,
+};
+
static unsigned int ata_dev_init_params(struct ata_device *dev,
u16 heads, u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
@@ -326,6 +338,44 @@
}
/**
+ * atapi_cmd_type - Determine ATAPI command type from SCSI opcode
+ * @opcode: SCSI opcode
+ *
+ * Determine ATAPI command type from @opcode.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC}
+ */
+int atapi_cmd_type(u8 opcode)
+{
+ switch (opcode) {
+ case GPCMD_READ_10:
+ case GPCMD_READ_12:
+ return ATAPI_READ;
+
+ case GPCMD_WRITE_10:
+ case GPCMD_WRITE_12:
+ case GPCMD_WRITE_AND_VERIFY_10:
+ return ATAPI_WRITE;
+
+ case GPCMD_READ_CD:
+ case GPCMD_READ_CD_MSF:
+ return ATAPI_READ_CD;
+
+ case ATA_16:
+ case ATA_12:
+ if (atapi_passthru16)
+ return ATAPI_PASS_THRU;
+ /* fall thru */
+ default:
+ return ATAPI_MISC;
+ }
+}
+
+/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
* @pmp: Port multiplier port
@@ -1005,50 +1055,6 @@
}
#endif /* CONFIG_PM */
-
-/**
- * ata_devchk - PATA device presence detection
- * @ap: ATA channel to examine
- * @device: Device to examine (starting at zero)
- *
- * This technique was originally described in
- * Hale Landis's ATADRVR (www.ata-atapi.com), and
- * later found its way into the ATA/ATAPI spec.
- *
- * Write a pattern to the ATA shadow registers,
- * and if a device is present, it will respond by
- * correctly storing and echoing back the
- * ATA shadow register contents.
- *
- * LOCKING:
- * caller.
- */
-
-static unsigned int ata_devchk(struct ata_port *ap, unsigned int device)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- u8 nsect, lbal;
-
- ap->ops->dev_select(ap, device);
-
- iowrite8(0x55, ioaddr->nsect_addr);
- iowrite8(0xaa, ioaddr->lbal_addr);
-
- iowrite8(0xaa, ioaddr->nsect_addr);
- iowrite8(0x55, ioaddr->lbal_addr);
-
- iowrite8(0x55, ioaddr->nsect_addr);
- iowrite8(0xaa, ioaddr->lbal_addr);
-
- nsect = ioread8(ioaddr->nsect_addr);
- lbal = ioread8(ioaddr->lbal_addr);
-
- if ((nsect == 0x55) && (lbal == 0xaa))
- return 1; /* we found a device */
-
- return 0; /* nothing found */
-}
-
/**
* ata_dev_classify - determine device type based on ATA-spec signature
* @tf: ATA taskfile register set for device to be identified
@@ -1109,75 +1115,6 @@
}
/**
- * ata_dev_try_classify - Parse returned ATA device signature
- * @dev: ATA device to classify (starting at zero)
- * @present: device seems present
- * @r_err: Value of error register on completion
- *
- * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs,
- * an ATA/ATAPI-defined set of values is placed in the ATA
- * shadow registers, indicating the results of device detection
- * and diagnostics.
- *
- * Select the ATA device, and read the values from the ATA shadow
- * registers. Then parse according to the Error register value,
- * and the spec-defined values examined by ata_dev_classify().
- *
- * LOCKING:
- * caller.
- *
- * RETURNS:
- * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
- */
-unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
- u8 *r_err)
-{
- struct ata_port *ap = dev->link->ap;
- struct ata_taskfile tf;
- unsigned int class;
- u8 err;
-
- ap->ops->dev_select(ap, dev->devno);
-
- memset(&tf, 0, sizeof(tf));
-
- ap->ops->tf_read(ap, &tf);
- err = tf.feature;
- if (r_err)
- *r_err = err;
-
- /* see if device passed diags: continue and warn later */
- if (err == 0)
- /* diagnostic fail : do nothing _YET_ */
- dev->horkage |= ATA_HORKAGE_DIAGNOSTIC;
- else if (err == 1)
- /* do nothing */ ;
- else if ((dev->devno == 0) && (err == 0x81))
- /* do nothing */ ;
- else
- return ATA_DEV_NONE;
-
- /* determine if device is ATA or ATAPI */
- class = ata_dev_classify(&tf);
-
- if (class == ATA_DEV_UNKNOWN) {
- /* If the device failed diagnostic, it's likely to
- * have reported incorrect device signature too.
- * Assume ATA device if the device seems present but
- * device signature is invalid with diagnostic
- * failure.
- */
- if (present && (dev->horkage & ATA_HORKAGE_DIAGNOSTIC))
- class = ATA_DEV_ATA;
- else
- class = ATA_DEV_NONE;
- } else if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0))
- class = ATA_DEV_NONE;
-
- return class;
-}
-
-/**
* ata_id_string - Convert IDENTIFY DEVICE page into string
* @id: IDENTIFY DEVICE results we will examine
* @s: string into which data is output
@@ -1255,7 +1192,7 @@
}
}
-static u64 ata_tf_to_lba48(struct ata_taskfile *tf)
+u64 ata_tf_to_lba48(const struct ata_taskfile *tf)
{
u64 sectors = 0;
@@ -1266,10 +1203,10 @@
sectors |= (tf->lbam & 0xff) << 8;
sectors |= (tf->lbal & 0xff);
- return ++sectors;
+ return sectors;
}
-static u64 ata_tf_to_lba(struct ata_taskfile *tf)
+u64 ata_tf_to_lba(const struct ata_taskfile *tf)
{
u64 sectors = 0;
@@ -1278,7 +1215,7 @@
sectors |= (tf->lbam & 0xff) << 8;
sectors |= (tf->lbal & 0xff);
- return ++sectors;
+ return sectors;
}
/**
@@ -1323,9 +1260,9 @@
}
if (lba48)
- *max_sectors = ata_tf_to_lba48(&tf);
+ *max_sectors = ata_tf_to_lba48(&tf) + 1;
else
- *max_sectors = ata_tf_to_lba(&tf);
+ *max_sectors = ata_tf_to_lba(&tf) + 1;
if (dev->horkage & ATA_HORKAGE_HPA_SIZE)
(*max_sectors)--;
return 0;
@@ -1485,89 +1422,6 @@
}
/**
- * ata_noop_dev_select - Select device 0/1 on ATA bus
- * @ap: ATA channel to manipulate
- * @device: ATA device (numbered from zero) to select
- *
- * This function performs no actual function.
- *
- * May be used as the dev_select() entry in ata_port_operations.
- *
- * LOCKING:
- * caller.
- */
-void ata_noop_dev_select(struct ata_port *ap, unsigned int device)
-{
-}
-
-
-/**
- * ata_std_dev_select - Select device 0/1 on ATA bus
- * @ap: ATA channel to manipulate
- * @device: ATA device (numbered from zero) to select
- *
- * Use the method defined in the ATA specification to
- * make either device 0, or device 1, active on the
- * ATA channel. Works with both PIO and MMIO.
- *
- * May be used as the dev_select() entry in ata_port_operations.
- *
- * LOCKING:
- * caller.
- */
-
-void ata_std_dev_select(struct ata_port *ap, unsigned int device)
-{
- u8 tmp;
-
- if (device == 0)
- tmp = ATA_DEVICE_OBS;
- else
- tmp = ATA_DEVICE_OBS | ATA_DEV1;
-
- iowrite8(tmp, ap->ioaddr.device_addr);
- ata_pause(ap); /* needed; also flushes, for mmio */
-}
-
-/**
- * ata_dev_select - Select device 0/1 on ATA bus
- * @ap: ATA channel to manipulate
- * @device: ATA device (numbered from zero) to select
- * @wait: non-zero to wait for Status register BSY bit to clear
- * @can_sleep: non-zero if context allows sleeping
- *
- * Use the method defined in the ATA specification to
- * make either device 0, or device 1, active on the
- * ATA channel.
- *
- * This is a high-level version of ata_std_dev_select(),
- * which additionally provides the services of inserting
- * the proper pauses and status polling, where needed.
- *
- * LOCKING:
- * caller.
- */
-
-void ata_dev_select(struct ata_port *ap, unsigned int device,
- unsigned int wait, unsigned int can_sleep)
-{
- if (ata_msg_probe(ap))
- ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, "
- "device %u, wait %u\n", device, wait);
-
- if (wait)
- ata_wait_idle(ap);
-
- ap->ops->dev_select(ap, device);
-
- if (wait) {
- if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI)
- msleep(150);
- ata_wait_idle(ap);
- }
-}
-
-/**
* ata_dump_id - IDENTIFY DEVICE info debugging output
* @id: IDENTIFY DEVICE page to dump
*
@@ -1694,8 +1548,7 @@
* LOCKING:
* Inherited from caller.
*/
-static void ata_pio_queue_task(struct ata_port *ap, void *data,
- unsigned long delay)
+void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay)
{
ap->port_task_data = data;
@@ -2059,7 +1912,6 @@
if (ata_msg_ctl(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
- ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
retry:
ata_tf_init(dev, &tf);
@@ -2426,7 +2278,7 @@
* changed notifications and ATAPI ANs.
*/
if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
- (!ap->nr_pmp_links ||
+ (!sata_pmp_attached(ap) ||
sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
unsigned int err_mask;
@@ -2520,9 +2372,6 @@
}
}
- if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
- __func__, ata_chk_status(ap));
return 0;
err_out_nosup:
@@ -2660,7 +2509,7 @@
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev_reverse(dev, &ap->link) {
if (tries[dev->devno])
dev->class = classes[dev->devno];
@@ -3283,16 +3132,21 @@
if (rc)
return rc;
- /* Old CFA may refuse this command, which is just fine */
- if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id))
- ign_dev_err = 1;
-
- /* Some very old devices and some bad newer ones fail any kind of
- SET_XFERMODE request but support PIO0-2 timings and no IORDY */
- if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) &&
- dev->pio_mode <= XFER_PIO_2)
- ign_dev_err = 1;
-
+ if (dev->xfer_shift == ATA_SHIFT_PIO) {
+ /* Old CFA may refuse this command, which is just fine */
+ if (ata_id_is_cfa(dev->id))
+ ign_dev_err = 1;
+ /* Catch several broken garbage emulations plus some pre
+ ATA devices */
+ if (ata_id_major_version(dev->id) == 0 &&
+ dev->pio_mode <= XFER_PIO_2)
+ ign_dev_err = 1;
+ /* Some very old devices and some bad newer ones fail
+ any kind of SET_XFERMODE request but support PIO0-2
+ timings and no IORDY */
+ if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2)
+ ign_dev_err = 1;
+ }
/* Early MWDMA devices do DMA but don't allow DMA mode setting.
Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
@@ -3436,170 +3290,73 @@
}
/**
- * ata_tf_to_host - issue ATA taskfile to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
+ * ata_wait_ready - wait for link to become ready
+ * @link: link to be waited on
+ * @deadline: deadline jiffies for the operation
+ * @check_ready: callback to check link readiness
*
- * Issues ATA taskfile register set to ATA host controller,
- * with proper synchronization with interrupt handler and
- * other threads.
+ * Wait for @link to become ready. @check_ready should return
+ * positive number if @link is ready, 0 if it isn't, -ENODEV if
+ * link doesn't seem to be occupied, other errno for other error
+ * conditions.
+ *
+ * Transient -ENODEV conditions are allowed for
+ * ATA_TMOUT_FF_WAIT.
*
* LOCKING:
- * spin_lock_irqsave(host lock)
- */
-
-static inline void ata_tf_to_host(struct ata_port *ap,
- const struct ata_taskfile *tf)
-{
- ap->ops->tf_load(ap, tf);
- ap->ops->exec_command(ap, tf);
-}
-
-/**
- * ata_busy_sleep - sleep until BSY clears, or timeout
- * @ap: port containing status register to be polled
- * @tmout_pat: impatience timeout
- * @tmout: overall timeout
- *
- * Sleep until ATA Status register bit BSY clears,
- * or a timeout occurs.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
+ * EH context.
*
* RETURNS:
- * 0 on success, -errno otherwise.
+ * 0 if @linke is ready before @deadline; otherwise, -errno.
*/
-int ata_busy_sleep(struct ata_port *ap,
- unsigned long tmout_pat, unsigned long tmout)
-{
- unsigned long timer_start, timeout;
- u8 status;
-
- status = ata_busy_wait(ap, ATA_BUSY, 300);
- timer_start = jiffies;
- timeout = timer_start + tmout_pat;
- while (status != 0xff && (status & ATA_BUSY) &&
- time_before(jiffies, timeout)) {
- msleep(50);
- status = ata_busy_wait(ap, ATA_BUSY, 3);
- }
-
- if (status != 0xff && (status & ATA_BUSY))
- ata_port_printk(ap, KERN_WARNING,
- "port is slow to respond, please be patient "
- "(Status 0x%x)\n", status);
-
- timeout = timer_start + tmout;
- while (status != 0xff && (status & ATA_BUSY) &&
- time_before(jiffies, timeout)) {
- msleep(50);
- status = ata_chk_status(ap);
- }
-
- if (status == 0xff)
- return -ENODEV;
-
- if (status & ATA_BUSY) {
- ata_port_printk(ap, KERN_ERR, "port failed to respond "
- "(%lu secs, Status 0x%x)\n",
- tmout / HZ, status);
- return -EBUSY;
- }
-
- return 0;
-}
-
-/**
- * ata_wait_after_reset - wait before checking status after reset
- * @ap: port containing status register to be polled
- * @deadline: deadline jiffies for the operation
- *
- * After reset, we need to pause a while before reading status.
- * Also, certain combination of controller and device report 0xff
- * for some duration (e.g. until SATA PHY is up and running)
- * which is interpreted as empty port in ATA world. This
- * function also waits for such devices to get out of 0xff
- * status.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- */
-void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline)
-{
- unsigned long until = jiffies + ATA_TMOUT_FF_WAIT;
-
- if (time_before(until, deadline))
- deadline = until;
-
- /* Spec mandates ">= 2ms" before checking status. We wait
- * 150ms, because that was the magic delay used for ATAPI
- * devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- *
- * Old drivers/ide uses the 2mS rule and then waits for ready.
- */
- msleep(150);
-
- /* Wait for 0xff to clear. Some SATA devices take a long time
- * to clear 0xff after reset. For example, HHD424020F7SV00
- * iVDR needs >= 800ms while. Quantum GoVault needs even more
- * than that.
- *
- * Note that some PATA controllers (pata_ali) explode if
- * status register is read more than once when there's no
- * device attached.
- */
- if (ap->flags & ATA_FLAG_SATA) {
- while (1) {
- u8 status = ata_chk_status(ap);
-
- if (status != 0xff || time_after(jiffies, deadline))
- return;
-
- msleep(50);
- }
- }
-}
-
-/**
- * ata_wait_ready - sleep until BSY clears, or timeout
- * @ap: port containing status register to be polled
- * @deadline: deadline jiffies for the operation
- *
- * Sleep until ATA Status register bit BSY clears, or timeout
- * occurs.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int ata_wait_ready(struct ata_port *ap, unsigned long deadline)
+int ata_wait_ready(struct ata_link *link, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
{
unsigned long start = jiffies;
+ unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT;
int warned = 0;
- while (1) {
- u8 status = ata_chk_status(ap);
- unsigned long now = jiffies;
+ if (time_after(nodev_deadline, deadline))
+ nodev_deadline = deadline;
- if (!(status & ATA_BUSY))
+ while (1) {
+ unsigned long now = jiffies;
+ int ready, tmp;
+
+ ready = tmp = check_ready(link);
+ if (ready > 0)
return 0;
- if (!ata_link_online(&ap->link) && status == 0xff)
- return -ENODEV;
+
+ /* -ENODEV could be transient. Ignore -ENODEV if link
+ * is online. Also, some SATA devices take a long
+ * time to clear 0xff after reset. For example,
+ * HHD424020F7SV00 iVDR needs >= 800ms while Quantum
+ * GoVault needs even more than that. Wait for
+ * ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
+ *
+ * Note that some PATA controllers (pata_ali) explode
+ * if status register is read more than once when
+ * there's no device attached.
+ */
+ if (ready == -ENODEV) {
+ if (ata_link_online(link))
+ ready = 0;
+ else if ((link->ap->flags & ATA_FLAG_SATA) &&
+ !ata_link_offline(link) &&
+ time_before(now, nodev_deadline))
+ ready = 0;
+ }
+
+ if (ready)
+ return ready;
if (time_after(now, deadline))
return -EBUSY;
if (!warned && time_after(now, start + 5 * HZ) &&
(deadline - now > 3 * HZ)) {
- ata_port_printk(ap, KERN_WARNING,
- "port is slow to respond, please be patient "
- "(Status 0x%x)\n", status);
+ ata_link_printk(link, KERN_WARNING,
+ "link is slow to respond, please be patient "
+ "(ready=%d)\n", tmp);
warned = 1;
}
@@ -3607,179 +3364,26 @@
}
}
-static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
- unsigned long deadline)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int dev0 = devmask & (1 << 0);
- unsigned int dev1 = devmask & (1 << 1);
- int rc, ret = 0;
-
- /* if device 0 was found in ata_devchk, wait for its
- * BSY bit to clear
- */
- if (dev0) {
- rc = ata_wait_ready(ap, deadline);
- if (rc) {
- if (rc != -ENODEV)
- return rc;
- ret = rc;
- }
- }
-
- /* if device 1 was found in ata_devchk, wait for register
- * access briefly, then wait for BSY to clear.
- */
- if (dev1) {
- int i;
-
- ap->ops->dev_select(ap, 1);
-
- /* Wait for register access. Some ATAPI devices fail
- * to set nsect/lbal after reset, so don't waste too
- * much time on it. We're gonna wait for !BSY anyway.
- */
- for (i = 0; i < 2; i++) {
- u8 nsect, lbal;
-
- nsect = ioread8(ioaddr->nsect_addr);
- lbal = ioread8(ioaddr->lbal_addr);
- if ((nsect == 1) && (lbal == 1))
- break;
- msleep(50); /* give drive a breather */
- }
-
- rc = ata_wait_ready(ap, deadline);
- if (rc) {
- if (rc != -ENODEV)
- return rc;
- ret = rc;
- }
- }
-
- /* is all this really necessary? */
- ap->ops->dev_select(ap, 0);
- if (dev1)
- ap->ops->dev_select(ap, 1);
- if (dev0)
- ap->ops->dev_select(ap, 0);
-
- return ret;
-}
-
-static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
- unsigned long deadline)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
- DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
-
- /* software reset. causes dev0 to be selected */
- iowrite8(ap->ctl, ioaddr->ctl_addr);
- udelay(20); /* FIXME: flush */
- iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
- udelay(20); /* FIXME: flush */
- iowrite8(ap->ctl, ioaddr->ctl_addr);
-
- /* wait a while before checking status */
- ata_wait_after_reset(ap, deadline);
-
- /* Before we perform post reset processing we want to see if
- * the bus shows 0xFF because the odd clown forgets the D7
- * pulldown resistor.
- */
- if (ata_chk_status(ap) == 0xFF)
- return -ENODEV;
-
- return ata_bus_post_reset(ap, devmask, deadline);
-}
-
/**
- * ata_bus_reset - reset host port and associated ATA channel
- * @ap: port to reset
+ * ata_wait_after_reset - wait for link to become ready after reset
+ * @link: link to be waited on
+ * @deadline: deadline jiffies for the operation
+ * @check_ready: callback to check link readiness
*
- * This is typically the first time we actually start issuing
- * commands to the ATA channel. We wait for BSY to clear, then
- * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
- * result. Determine what devices, if any, are on the channel
- * by looking at the device 0/1 error register. Look at the signature
- * stored in each device's taskfile registers, to determine if
- * the device is ATA or ATAPI.
+ * Wait for @link to become ready after reset.
*
* LOCKING:
- * PCI/etc. bus probe sem.
- * Obtains host lock.
+ * EH context.
*
- * SIDE EFFECTS:
- * Sets ATA_FLAG_DISABLED if bus reset fails.
+ * RETURNS:
+ * 0 if @linke is ready before @deadline; otherwise, -errno.
*/
-
-void ata_bus_reset(struct ata_port *ap)
+extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
{
- struct ata_device *device = ap->link.device;
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
- u8 err;
- unsigned int dev0, dev1 = 0, devmask = 0;
- int rc;
+ msleep(ATA_WAIT_AFTER_RESET_MSECS);
- DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
-
- /* determine if device 0/1 are present */
- if (ap->flags & ATA_FLAG_SATA_RESET)
- dev0 = 1;
- else {
- dev0 = ata_devchk(ap, 0);
- if (slave_possible)
- dev1 = ata_devchk(ap, 1);
- }
-
- if (dev0)
- devmask |= (1 << 0);
- if (dev1)
- devmask |= (1 << 1);
-
- /* select device 0 again */
- ap->ops->dev_select(ap, 0);
-
- /* issue bus reset */
- if (ap->flags & ATA_FLAG_SRST) {
- rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ);
- if (rc && rc != -ENODEV)
- goto err_out;
- }
-
- /*
- * determine by signature whether we have ATA or ATAPI devices
- */
- device[0].class = ata_dev_try_classify(&device[0], dev0, &err);
- if ((slave_possible) && (err != 0x81))
- device[1].class = ata_dev_try_classify(&device[1], dev1, &err);
-
- /* is double-select really necessary? */
- if (device[1].class != ATA_DEV_NONE)
- ap->ops->dev_select(ap, 1);
- if (device[0].class != ATA_DEV_NONE)
- ap->ops->dev_select(ap, 0);
-
- /* if no devices were detected, disable this port */
- if ((device[0].class == ATA_DEV_NONE) &&
- (device[1].class == ATA_DEV_NONE))
- goto err_out;
-
- if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
- /* set up device control for ATA_FLAG_SATA_RESET */
- iowrite8(ap->ctl, ioaddr->ctl_addr);
- }
-
- DPRINTK("EXIT\n");
- return;
-
-err_out:
- ata_port_printk(ap, KERN_ERR, "disabling port\n");
- ata_port_disable(ap);
-
- DPRINTK("EXIT\n");
+ return ata_wait_ready(link, deadline, check_ready);
}
/**
@@ -3868,7 +3472,7 @@
int sata_link_resume(struct ata_link *link, const unsigned long *params,
unsigned long deadline)
{
- u32 scontrol;
+ u32 scontrol, serror;
int rc;
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
@@ -3884,7 +3488,25 @@
*/
msleep(200);
- return sata_link_debounce(link, params, deadline);
+ if ((rc = sata_link_debounce(link, params, deadline)))
+ return rc;
+
+ /* Clear SError. PMP and some host PHYs require this to
+ * operate and clearing should be done before checking PHY
+ * online status to avoid race condition (hotplugging between
+ * link resume and status check).
+ */
+ if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
+ rc = sata_scr_write(link, SCR_ERROR, serror);
+ if (rc == 0 || rc == -EINVAL) {
+ unsigned long flags;
+
+ spin_lock_irqsave(link->ap->lock, flags);
+ link->eh_info.serror = 0;
+ spin_unlock_irqrestore(link->ap->lock, flags);
+ rc = 0;
+ }
+ return rc;
}
/**
@@ -3911,17 +3533,6 @@
const unsigned long *timing = sata_ehc_deb_timing(ehc);
int rc;
- /* handle link resume */
- if ((ehc->i.flags & ATA_EHI_RESUME_LINK) &&
- (link->flags & ATA_LFLAG_HRST_TO_RESUME))
- ehc->i.action |= ATA_EH_HARDRESET;
-
- /* Some PMPs don't work with only SRST, force hardreset if PMP
- * is supported.
- */
- if (ap->flags & ATA_FLAG_PMP)
- ehc->i.action |= ATA_EH_HARDRESET;
-
/* if we're about to do hardreset, nothing more to do */
if (ehc->i.action & ATA_EH_HARDRESET)
return 0;
@@ -3935,88 +3546,30 @@
"link for reset (errno=%d)\n", rc);
}
- /* Wait for !BSY if the controller can wait for the first D2H
- * Reg FIS and we don't know that no device is attached.
- */
- if (!(link->flags & ATA_LFLAG_SKIP_D2H_BSY) && !ata_link_offline(link)) {
- rc = ata_wait_ready(ap, deadline);
- if (rc && rc != -ENODEV) {
- ata_link_printk(link, KERN_WARNING, "device not ready "
- "(errno=%d), forcing hardreset\n", rc);
- ehc->i.action |= ATA_EH_HARDRESET;
- }
- }
+ /* no point in trying softreset on offline link */
+ if (ata_link_offline(link))
+ ehc->i.action &= ~ATA_EH_SOFTRESET;
return 0;
}
/**
- * ata_std_softreset - reset host port via ATA SRST
- * @link: ATA link to reset
- * @classes: resulting classes of attached devices
- * @deadline: deadline jiffies for the operation
- *
- * Reset host port using ATA SRST.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int ata_std_softreset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
- unsigned int devmask = 0;
- int rc;
- u8 err;
-
- DPRINTK("ENTER\n");
-
- if (ata_link_offline(link)) {
- classes[0] = ATA_DEV_NONE;
- goto out;
- }
-
- /* determine if device 0/1 are present */
- if (ata_devchk(ap, 0))
- devmask |= (1 << 0);
- if (slave_possible && ata_devchk(ap, 1))
- devmask |= (1 << 1);
-
- /* select device 0 again */
- ap->ops->dev_select(ap, 0);
-
- /* issue bus reset */
- DPRINTK("about to softreset, devmask=%x\n", devmask);
- rc = ata_bus_softreset(ap, devmask, deadline);
- /* if link is occupied, -ENODEV too is an error */
- if (rc && (rc != -ENODEV || sata_scr_valid(link))) {
- ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
- return rc;
- }
-
- /* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_dev_try_classify(&link->device[0],
- devmask & (1 << 0), &err);
- if (slave_possible && err != 0x81)
- classes[1] = ata_dev_try_classify(&link->device[1],
- devmask & (1 << 1), &err);
-
- out:
- DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
- return 0;
-}
-
-/**
* sata_link_hardreset - reset link via SATA phy reset
* @link: link to reset
* @timing: timing parameters { interval, duratinon, timeout } in msec
* @deadline: deadline jiffies for the operation
+ * @online: optional out parameter indicating link onlineness
+ * @check_ready: optional callback to check link readiness
*
* SATA phy-reset @link using DET bits of SControl register.
+ * After hardreset, link readiness is waited upon using
+ * ata_wait_ready() if @check_ready is specified. LLDs are
+ * allowed to not specify @check_ready and wait itself after this
+ * function returns. Device classification is LLD's
+ * responsibility.
+ *
+ * *@online is set to one iff reset succeeded and @link is online
+ * after reset.
*
* LOCKING:
* Kernel thread context (may sleep)
@@ -4025,13 +3578,17 @@
* 0 on success, -errno otherwise.
*/
int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
- unsigned long deadline)
+ unsigned long deadline,
+ bool *online, int (*check_ready)(struct ata_link *))
{
u32 scontrol;
int rc;
DPRINTK("ENTER\n");
+ if (online)
+ *online = false;
+
if (sata_set_spd_needed(link)) {
/* SATA spec says nothing about how to reconfigure
* spd. To be on the safe side, turn off phy during
@@ -4065,77 +3622,69 @@
/* bring link back */
rc = sata_link_resume(link, timing, deadline);
+ if (rc)
+ goto out;
+ /* if link is offline nothing more to do */
+ if (ata_link_offline(link))
+ goto out;
+
+ /* Link is online. From this point, -ENODEV too is an error. */
+ if (online)
+ *online = true;
+
+ if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
+ /* If PMP is supported, we have to do follow-up SRST.
+ * Some PMPs don't send D2H Reg FIS after hardreset if
+ * the first port is empty. Wait only for
+ * ATA_TMOUT_PMP_SRST_WAIT.
+ */
+ if (check_ready) {
+ unsigned long pmp_deadline;
+
+ pmp_deadline = jiffies + ATA_TMOUT_PMP_SRST_WAIT;
+ if (time_after(pmp_deadline, deadline))
+ pmp_deadline = deadline;
+ ata_wait_ready(link, pmp_deadline, check_ready);
+ }
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ rc = 0;
+ if (check_ready)
+ rc = ata_wait_ready(link, deadline, check_ready);
out:
+ if (rc && rc != -EAGAIN)
+ ata_link_printk(link, KERN_ERR,
+ "COMRESET failed (errno=%d)\n", rc);
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
}
/**
- * sata_std_hardreset - reset host port via SATA phy reset
+ * sata_std_hardreset - COMRESET w/o waiting or classification
* @link: link to reset
* @class: resulting class of attached device
* @deadline: deadline jiffies for the operation
*
- * SATA phy-reset host port using DET bits of SControl register,
- * wait for !BSY and classify the attached device.
+ * Standard SATA COMRESET w/o waiting or classification.
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
- * 0 on success, -errno otherwise.
+ * 0 if link offline, -EAGAIN if link online, -errno on errors.
*/
int sata_std_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
- struct ata_port *ap = link->ap;
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+ bool online;
int rc;
- DPRINTK("ENTER\n");
-
/* do hardreset */
- rc = sata_link_hardreset(link, timing, deadline);
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "COMRESET failed (errno=%d)\n", rc);
- return rc;
- }
-
- /* TODO: phy layer with polling, timeouts, etc. */
- if (ata_link_offline(link)) {
- *class = ATA_DEV_NONE;
- DPRINTK("EXIT, link offline\n");
- return 0;
- }
-
- /* wait a while before checking status */
- ata_wait_after_reset(ap, deadline);
-
- /* If PMP is supported, we have to do follow-up SRST. Note
- * that some PMPs don't send D2H Reg FIS after hardreset at
- * all if the first port is empty. Wait for it just for a
- * second and request follow-up SRST.
- */
- if (ap->flags & ATA_FLAG_PMP) {
- ata_wait_ready(ap, jiffies + HZ);
- return -EAGAIN;
- }
-
- rc = ata_wait_ready(ap, deadline);
- /* link occupied, -ENODEV too is an error */
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "COMRESET failed (errno=%d)\n", rc);
- return rc;
- }
-
- ap->ops->dev_select(ap, 0); /* probably unnecessary */
-
- *class = ata_dev_try_classify(link->device, 1, NULL);
-
- DPRINTK("EXIT, class=%u\n", *class);
- return 0;
+ rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
+ return online ? -EAGAIN : rc;
}
/**
@@ -4152,35 +3701,11 @@
*/
void ata_std_postreset(struct ata_link *link, unsigned int *classes)
{
- struct ata_port *ap = link->ap;
- u32 serror;
-
DPRINTK("ENTER\n");
/* print link status */
sata_print_link_status(link);
- /* clear SError */
- if (sata_scr_read(link, SCR_ERROR, &serror) == 0)
- sata_scr_write(link, SCR_ERROR, serror);
- link->eh_info.serror = 0;
-
- /* is double-select really necessary? */
- if (classes[0] != ATA_DEV_NONE)
- ap->ops->dev_select(ap, 1);
- if (classes[1] != ATA_DEV_NONE)
- ap->ops->dev_select(ap, 0);
-
- /* bail out if no device is present */
- if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
- DPRINTK("EXIT, no device\n");
- return;
- }
-
- /* set up device control */
- if (ap->ioaddr.ctl_addr)
- iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
-
DPRINTK("EXIT\n");
}
@@ -4490,6 +4015,53 @@
}
/**
+ * cable_is_40wire - 40/80/SATA decider
+ * @ap: port to consider
+ *
+ * This function encapsulates the policy for speed management
+ * in one place. At the moment we don't cache the result but
+ * there is a good case for setting ap->cbl to the result when
+ * we are called with unknown cables (and figuring out if it
+ * impacts hotplug at all).
+ *
+ * Return 1 if the cable appears to be 40 wire.
+ */
+
+static int cable_is_40wire(struct ata_port *ap)
+{
+ struct ata_link *link;
+ struct ata_device *dev;
+
+ /* If the controller thinks we are 40 wire, we are */
+ if (ap->cbl == ATA_CBL_PATA40)
+ return 1;
+ /* If the controller thinks we are 80 wire, we are */
+ if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
+ return 0;
+ /* If the system is known to be 40 wire short cable (eg laptop),
+ then we allow 80 wire modes even if the drive isn't sure */
+ if (ap->cbl == ATA_CBL_PATA40_SHORT)
+ return 0;
+ /* If the controller doesn't know we scan
+
+ - Note: We look for all 40 wire detects at this point.
+ Any 80 wire detect is taken to be 80 wire cable
+ because
+ - In many setups only the one drive (slave if present)
+ will give a valid detect
+ - If you have a non detect capable drive you don't
+ want it to colour the choice
+ */
+ ata_port_for_each_link(link, ap) {
+ ata_link_for_each_dev(dev, link) {
+ if (!ata_is_40wire(dev))
+ return 0;
+ }
+ }
+ return 1;
+}
+
+/**
* ata_dev_xfermask - Compute supported xfermask of the given device
* @dev: Device to compute xfermask for
*
@@ -4557,10 +4129,7 @@
*/
if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
/* UDMA/44 or higher would be available */
- if ((ap->cbl == ATA_CBL_PATA40) ||
- (ata_is_40wire(dev) &&
- (ap->cbl == ATA_CBL_PATA_UNK ||
- ap->cbl == ATA_CBL_PATA80))) {
+ if (cable_is_40wire(ap)) {
ata_dev_printk(dev, KERN_WARNING,
"limited to UDMA/33 due to 40-wire cable\n");
xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
@@ -4721,112 +4290,6 @@
}
/**
- * ata_fill_sg - Fill PCI IDE PRD table
- * @qc: Metadata associated with taskfile to be transferred
- *
- * Fill PCI IDE PRD (scatter-gather) table with segments
- * associated with the current disk command.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- */
-static void ata_fill_sg(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct scatterlist *sg;
- unsigned int si, pi;
-
- pi = 0;
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- u32 addr, offset;
- u32 sg_len, len;
-
- /* determine if physical DMA addr spans 64K boundary.
- * Note h/w doesn't support 64-bit, so we unconditionally
- * truncate dma_addr_t to u32.
- */
- addr = (u32) sg_dma_address(sg);
- sg_len = sg_dma_len(sg);
-
- while (sg_len) {
- offset = addr & 0xffff;
- len = sg_len;
- if ((offset + sg_len) > 0x10000)
- len = 0x10000 - offset;
-
- ap->prd[pi].addr = cpu_to_le32(addr);
- ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
-
- pi++;
- sg_len -= len;
- addr += len;
- }
- }
-
- ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
-}
-
-/**
- * ata_fill_sg_dumb - Fill PCI IDE PRD table
- * @qc: Metadata associated with taskfile to be transferred
- *
- * Fill PCI IDE PRD (scatter-gather) table with segments
- * associated with the current disk command. Perform the fill
- * so that we avoid writing any length 64K records for
- * controllers that don't follow the spec.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- */
-static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct scatterlist *sg;
- unsigned int si, pi;
-
- pi = 0;
- for_each_sg(qc->sg, sg, qc->n_elem, si) {
- u32 addr, offset;
- u32 sg_len, len, blen;
-
- /* determine if physical DMA addr spans 64K boundary.
- * Note h/w doesn't support 64-bit, so we unconditionally
- * truncate dma_addr_t to u32.
- */
- addr = (u32) sg_dma_address(sg);
- sg_len = sg_dma_len(sg);
-
- while (sg_len) {
- offset = addr & 0xffff;
- len = sg_len;
- if ((offset + sg_len) > 0x10000)
- len = 0x10000 - offset;
-
- blen = len & 0xffff;
- ap->prd[pi].addr = cpu_to_le32(addr);
- if (blen == 0) {
- /* Some PATA chipsets like the CS5530 can't
- cope with 0x0000 meaning 64K as the spec says */
- ap->prd[pi].flags_len = cpu_to_le32(0x8000);
- blen = 0x8000;
- ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
- }
- ap->prd[pi].flags_len = cpu_to_le32(blen);
- VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
-
- pi++;
- sg_len -= len;
- addr += len;
- }
- }
-
- ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
-}
-
-/**
* ata_check_atapi_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
@@ -4886,40 +4349,6 @@
return ATA_DEFER_LINK;
}
-/**
- * ata_qc_prep - Prepare taskfile for submission
- * @qc: Metadata associated with taskfile to be prepared
- *
- * Prepare ATA taskfile for submission.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_qc_prep(struct ata_queued_cmd *qc)
-{
- if (!(qc->flags & ATA_QCFLAG_DMAMAP))
- return;
-
- ata_fill_sg(qc);
-}
-
-/**
- * ata_dumb_qc_prep - Prepare taskfile for submission
- * @qc: Metadata associated with taskfile to be prepared
- *
- * Prepare ATA taskfile for submission.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_dumb_qc_prep(struct ata_queued_cmd *qc)
-{
- if (!(qc->flags & ATA_QCFLAG_DMAMAP))
- return;
-
- ata_fill_sg_dumb(qc);
-}
-
void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
/**
@@ -4998,698 +4427,6 @@
}
/**
- * ata_data_xfer - Transfer data by PIO
- * @dev: device to target
- * @buf: data buffer
- * @buflen: buffer length
- * @rw: read/write
- *
- * Transfer data from/to the device data register by PIO.
- *
- * LOCKING:
- * Inherited from caller.
- *
- * RETURNS:
- * Bytes consumed.
- */
-unsigned int ata_data_xfer(struct ata_device *dev, unsigned char *buf,
- unsigned int buflen, int rw)
-{
- struct ata_port *ap = dev->link->ap;
- void __iomem *data_addr = ap->ioaddr.data_addr;
- unsigned int words = buflen >> 1;
-
- /* Transfer multiple of 2 bytes */
- if (rw == READ)
- ioread16_rep(data_addr, buf, words);
- else
- iowrite16_rep(data_addr, buf, words);
-
- /* Transfer trailing 1 byte, if any. */
- if (unlikely(buflen & 0x01)) {
- __le16 align_buf[1] = { 0 };
- unsigned char *trailing_buf = buf + buflen - 1;
-
- if (rw == READ) {
- align_buf[0] = cpu_to_le16(ioread16(data_addr));
- memcpy(trailing_buf, align_buf, 1);
- } else {
- memcpy(align_buf, trailing_buf, 1);
- iowrite16(le16_to_cpu(align_buf[0]), data_addr);
- }
- words++;
- }
-
- return words << 1;
-}
-
-/**
- * ata_data_xfer_noirq - Transfer data by PIO
- * @dev: device to target
- * @buf: data buffer
- * @buflen: buffer length
- * @rw: read/write
- *
- * Transfer data from/to the device data register by PIO. Do the
- * transfer with interrupts disabled.
- *
- * LOCKING:
- * Inherited from caller.
- *
- * RETURNS:
- * Bytes consumed.
- */
-unsigned int ata_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
- unsigned int buflen, int rw)
-{
- unsigned long flags;
- unsigned int consumed;
-
- local_irq_save(flags);
- consumed = ata_data_xfer(dev, buf, buflen, rw);
- local_irq_restore(flags);
-
- return consumed;
-}
-
-
-/**
- * ata_pio_sector - Transfer a sector of data.
- * @qc: Command on going
- *
- * Transfer qc->sect_size bytes of data from/to the ATA device.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static void ata_pio_sector(struct ata_queued_cmd *qc)
-{
- int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
- struct ata_port *ap = qc->ap;
- struct page *page;
- unsigned int offset;
- unsigned char *buf;
-
- if (qc->curbytes == qc->nbytes - qc->sect_size)
- ap->hsm_task_state = HSM_ST_LAST;
-
- page = sg_page(qc->cursg);
- offset = qc->cursg->offset + qc->cursg_ofs;
-
- /* get the current page and offset */
- page = nth_page(page, (offset >> PAGE_SHIFT));
- offset %= PAGE_SIZE;
-
- DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
-
- if (PageHighMem(page)) {
- unsigned long flags;
-
- /* FIXME: use a bounce buffer */
- local_irq_save(flags);
- buf = kmap_atomic(page, KM_IRQ0);
-
- /* do the actual data transfer */
- ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
-
- kunmap_atomic(buf, KM_IRQ0);
- local_irq_restore(flags);
- } else {
- buf = page_address(page);
- ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
- }
-
- qc->curbytes += qc->sect_size;
- qc->cursg_ofs += qc->sect_size;
-
- if (qc->cursg_ofs == qc->cursg->length) {
- qc->cursg = sg_next(qc->cursg);
- qc->cursg_ofs = 0;
- }
-}
-
-/**
- * ata_pio_sectors - Transfer one or many sectors.
- * @qc: Command on going
- *
- * Transfer one or many sectors of data from/to the
- * ATA device for the DRQ request.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static void ata_pio_sectors(struct ata_queued_cmd *qc)
-{
- if (is_multi_taskfile(&qc->tf)) {
- /* READ/WRITE MULTIPLE */
- unsigned int nsect;
-
- WARN_ON(qc->dev->multi_count == 0);
-
- nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size,
- qc->dev->multi_count);
- while (nsect--)
- ata_pio_sector(qc);
- } else
- ata_pio_sector(qc);
-
- ata_altstatus(qc->ap); /* flush */
-}
-
-/**
- * atapi_send_cdb - Write CDB bytes to hardware
- * @ap: Port to which ATAPI device is attached.
- * @qc: Taskfile currently active
- *
- * When device has indicated its readiness to accept
- * a CDB, this function is called. Send the CDB.
- *
- * LOCKING:
- * caller.
- */
-
-static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
-{
- /* send SCSI cdb */
- DPRINTK("send cdb\n");
- WARN_ON(qc->dev->cdb_len < 12);
-
- ap->ops->data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
- ata_altstatus(ap); /* flush */
-
- switch (qc->tf.protocol) {
- case ATAPI_PROT_PIO:
- ap->hsm_task_state = HSM_ST;
- break;
- case ATAPI_PROT_NODATA:
- ap->hsm_task_state = HSM_ST_LAST;
- break;
- case ATAPI_PROT_DMA:
- ap->hsm_task_state = HSM_ST_LAST;
- /* initiate bmdma */
- ap->ops->bmdma_start(qc);
- break;
- }
-}
-
-/**
- * __atapi_pio_bytes - Transfer data from/to the ATAPI device.
- * @qc: Command on going
- * @bytes: number of bytes
- *
- * Transfer Transfer data from/to the ATAPI device.
- *
- * LOCKING:
- * Inherited from caller.
- *
- */
-static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
-{
- int rw = (qc->tf.flags & ATA_TFLAG_WRITE) ? WRITE : READ;
- struct ata_port *ap = qc->ap;
- struct ata_device *dev = qc->dev;
- struct ata_eh_info *ehi = &dev->link->eh_info;
- struct scatterlist *sg;
- struct page *page;
- unsigned char *buf;
- unsigned int offset, count, consumed;
-
-next_sg:
- sg = qc->cursg;
- if (unlikely(!sg)) {
- ata_ehi_push_desc(ehi, "unexpected or too much trailing data "
- "buf=%u cur=%u bytes=%u",
- qc->nbytes, qc->curbytes, bytes);
- return -1;
- }
-
- page = sg_page(sg);
- offset = sg->offset + qc->cursg_ofs;
-
- /* get the current page and offset */
- page = nth_page(page, (offset >> PAGE_SHIFT));
- offset %= PAGE_SIZE;
-
- /* don't overrun current sg */
- count = min(sg->length - qc->cursg_ofs, bytes);
-
- /* don't cross page boundaries */
- count = min(count, (unsigned int)PAGE_SIZE - offset);
-
- DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
-
- if (PageHighMem(page)) {
- unsigned long flags;
-
- /* FIXME: use bounce buffer */
- local_irq_save(flags);
- buf = kmap_atomic(page, KM_IRQ0);
-
- /* do the actual data transfer */
- consumed = ap->ops->data_xfer(dev, buf + offset, count, rw);
-
- kunmap_atomic(buf, KM_IRQ0);
- local_irq_restore(flags);
- } else {
- buf = page_address(page);
- consumed = ap->ops->data_xfer(dev, buf + offset, count, rw);
- }
-
- bytes -= min(bytes, consumed);
- qc->curbytes += count;
- qc->cursg_ofs += count;
-
- if (qc->cursg_ofs == sg->length) {
- qc->cursg = sg_next(qc->cursg);
- qc->cursg_ofs = 0;
- }
-
- /* consumed can be larger than count only for the last transfer */
- WARN_ON(qc->cursg && count != consumed);
-
- if (bytes)
- goto next_sg;
- return 0;
-}
-
-/**
- * atapi_pio_bytes - Transfer data from/to the ATAPI device.
- * @qc: Command on going
- *
- * Transfer Transfer data from/to the ATAPI device.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static void atapi_pio_bytes(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct ata_device *dev = qc->dev;
- struct ata_eh_info *ehi = &dev->link->eh_info;
- unsigned int ireason, bc_lo, bc_hi, bytes;
- int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0;
-
- /* Abuse qc->result_tf for temp storage of intermediate TF
- * here to save some kernel stack usage.
- * For normal completion, qc->result_tf is not relevant. For
- * error, qc->result_tf is later overwritten by ata_qc_complete().
- * So, the correctness of qc->result_tf is not affected.
- */
- ap->ops->tf_read(ap, &qc->result_tf);
- ireason = qc->result_tf.nsect;
- bc_lo = qc->result_tf.lbam;
- bc_hi = qc->result_tf.lbah;
- bytes = (bc_hi << 8) | bc_lo;
-
- /* shall be cleared to zero, indicating xfer of data */
- if (unlikely(ireason & (1 << 0)))
- goto atapi_check;
-
- /* make sure transfer direction matches expected */
- i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0;
- if (unlikely(do_write != i_write))
- goto atapi_check;
-
- if (unlikely(!bytes))
- goto atapi_check;
-
- VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
-
- if (unlikely(__atapi_pio_bytes(qc, bytes)))
- goto err_out;
- ata_altstatus(ap); /* flush */
-
- return;
-
- atapi_check:
- ata_ehi_push_desc(ehi, "ATAPI check failed (ireason=0x%x bytes=%u)",
- ireason, bytes);
- err_out:
- qc->err_mask |= AC_ERR_HSM;
- ap->hsm_task_state = HSM_ST_ERR;
-}
-
-/**
- * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue.
- * @ap: the target ata_port
- * @qc: qc on going
- *
- * RETURNS:
- * 1 if ok in workqueue, 0 otherwise.
- */
-
-static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
-{
- if (qc->tf.flags & ATA_TFLAG_POLLING)
- return 1;
-
- if (ap->hsm_task_state == HSM_ST_FIRST) {
- if (qc->tf.protocol == ATA_PROT_PIO &&
- (qc->tf.flags & ATA_TFLAG_WRITE))
- return 1;
-
- if (ata_is_atapi(qc->tf.protocol) &&
- !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- return 1;
- }
-
- return 0;
-}
-
-/**
- * ata_hsm_qc_complete - finish a qc running on standard HSM
- * @qc: Command to complete
- * @in_wq: 1 if called from workqueue, 0 otherwise
- *
- * Finish @qc which is running on standard HSM.
- *
- * LOCKING:
- * If @in_wq is zero, spin_lock_irqsave(host lock).
- * Otherwise, none on entry and grabs host lock.
- */
-static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
-{
- struct ata_port *ap = qc->ap;
- unsigned long flags;
-
- if (ap->ops->error_handler) {
- if (in_wq) {
- spin_lock_irqsave(ap->lock, flags);
-
- /* EH might have kicked in while host lock is
- * released.
- */
- qc = ata_qc_from_tag(ap, qc->tag);
- if (qc) {
- if (likely(!(qc->err_mask & AC_ERR_HSM))) {
- ap->ops->irq_on(ap);
- ata_qc_complete(qc);
- } else
- ata_port_freeze(ap);
- }
-
- spin_unlock_irqrestore(ap->lock, flags);
- } else {
- if (likely(!(qc->err_mask & AC_ERR_HSM)))
- ata_qc_complete(qc);
- else
- ata_port_freeze(ap);
- }
- } else {
- if (in_wq) {
- spin_lock_irqsave(ap->lock, flags);
- ap->ops->irq_on(ap);
- ata_qc_complete(qc);
- spin_unlock_irqrestore(ap->lock, flags);
- } else
- ata_qc_complete(qc);
- }
-}
-
-/**
- * ata_hsm_move - move the HSM to the next state.
- * @ap: the target ata_port
- * @qc: qc on going
- * @status: current device status
- * @in_wq: 1 if called from workqueue, 0 otherwise
- *
- * RETURNS:
- * 1 when poll next status needed, 0 otherwise.
- */
-int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
- u8 status, int in_wq)
-{
- unsigned long flags = 0;
- int poll_next;
-
- WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
-
- /* Make sure ata_qc_issue_prot() does not throw things
- * like DMA polling into the workqueue. Notice that
- * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
- */
- WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
-
-fsm_start:
- DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
- ap->print_id, qc->tf.protocol, ap->hsm_task_state, status);
-
- switch (ap->hsm_task_state) {
- case HSM_ST_FIRST:
- /* Send first data block or PACKET CDB */
-
- /* If polling, we will stay in the work queue after
- * sending the data. Otherwise, interrupt handler
- * takes over after sending the data.
- */
- poll_next = (qc->tf.flags & ATA_TFLAG_POLLING);
-
- /* check device status */
- if (unlikely((status & ATA_DRQ) == 0)) {
- /* handle BSY=0, DRQ=0 as error */
- if (likely(status & (ATA_ERR | ATA_DF)))
- /* device stops HSM for abort/error */
- qc->err_mask |= AC_ERR_DEV;
- else
- /* HSM violation. Let EH handle this */
- qc->err_mask |= AC_ERR_HSM;
-
- ap->hsm_task_state = HSM_ST_ERR;
- goto fsm_start;
- }
-
- /* Device should not ask for data transfer (DRQ=1)
- * when it finds something wrong.
- * We ignore DRQ here and stop the HSM by
- * changing hsm_task_state to HSM_ST_ERR and
- * let the EH abort the command or reset the device.
- */
- if (unlikely(status & (ATA_ERR | ATA_DF))) {
- /* Some ATAPI tape drives forget to clear the ERR bit
- * when doing the next command (mostly request sense).
- * We ignore ERR here to workaround and proceed sending
- * the CDB.
- */
- if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
- ata_port_printk(ap, KERN_WARNING,
- "DRQ=1 with device error, "
- "dev_stat 0x%X\n", status);
- qc->err_mask |= AC_ERR_HSM;
- ap->hsm_task_state = HSM_ST_ERR;
- goto fsm_start;
- }
- }
-
- /* Send the CDB (atapi) or the first data block (ata pio out).
- * During the state transition, interrupt handler shouldn't
- * be invoked before the data transfer is complete and
- * hsm_task_state is changed. Hence, the following locking.
- */
- if (in_wq)
- spin_lock_irqsave(ap->lock, flags);
-
- if (qc->tf.protocol == ATA_PROT_PIO) {
- /* PIO data out protocol.
- * send first data block.
- */
-
- /* ata_pio_sectors() might change the state
- * to HSM_ST_LAST. so, the state is changed here
- * before ata_pio_sectors().
- */
- ap->hsm_task_state = HSM_ST;
- ata_pio_sectors(qc);
- } else
- /* send CDB */
- atapi_send_cdb(ap, qc);
-
- if (in_wq)
- spin_unlock_irqrestore(ap->lock, flags);
-
- /* if polling, ata_pio_task() handles the rest.
- * otherwise, interrupt handler takes over from here.
- */
- break;
-
- case HSM_ST:
- /* complete command or read/write the data register */
- if (qc->tf.protocol == ATAPI_PROT_PIO) {
- /* ATAPI PIO protocol */
- if ((status & ATA_DRQ) == 0) {
- /* No more data to transfer or device error.
- * Device error will be tagged in HSM_ST_LAST.
- */
- ap->hsm_task_state = HSM_ST_LAST;
- goto fsm_start;
- }
-
- /* Device should not ask for data transfer (DRQ=1)
- * when it finds something wrong.
- * We ignore DRQ here and stop the HSM by
- * changing hsm_task_state to HSM_ST_ERR and
- * let the EH abort the command or reset the device.
- */
- if (unlikely(status & (ATA_ERR | ATA_DF))) {
- ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
- "device error, dev_stat 0x%X\n",
- status);
- qc->err_mask |= AC_ERR_HSM;
- ap->hsm_task_state = HSM_ST_ERR;
- goto fsm_start;
- }
-
- atapi_pio_bytes(qc);
-
- if (unlikely(ap->hsm_task_state == HSM_ST_ERR))
- /* bad ireason reported by device */
- goto fsm_start;
-
- } else {
- /* ATA PIO protocol */
- if (unlikely((status & ATA_DRQ) == 0)) {
- /* handle BSY=0, DRQ=0 as error */
- if (likely(status & (ATA_ERR | ATA_DF)))
- /* device stops HSM for abort/error */
- qc->err_mask |= AC_ERR_DEV;
- else
- /* HSM violation. Let EH handle this.
- * Phantom devices also trigger this
- * condition. Mark hint.
- */
- qc->err_mask |= AC_ERR_HSM |
- AC_ERR_NODEV_HINT;
-
- ap->hsm_task_state = HSM_ST_ERR;
- goto fsm_start;
- }
-
- /* For PIO reads, some devices may ask for
- * data transfer (DRQ=1) alone with ERR=1.
- * We respect DRQ here and transfer one
- * block of junk data before changing the
- * hsm_task_state to HSM_ST_ERR.
- *
- * For PIO writes, ERR=1 DRQ=1 doesn't make
- * sense since the data block has been
- * transferred to the device.
- */
- if (unlikely(status & (ATA_ERR | ATA_DF))) {
- /* data might be corrputed */
- qc->err_mask |= AC_ERR_DEV;
-
- if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
- ata_pio_sectors(qc);
- status = ata_wait_idle(ap);
- }
-
- if (status & (ATA_BUSY | ATA_DRQ))
- qc->err_mask |= AC_ERR_HSM;
-
- /* ata_pio_sectors() might change the
- * state to HSM_ST_LAST. so, the state
- * is changed after ata_pio_sectors().
- */
- ap->hsm_task_state = HSM_ST_ERR;
- goto fsm_start;
- }
-
- ata_pio_sectors(qc);
-
- if (ap->hsm_task_state == HSM_ST_LAST &&
- (!(qc->tf.flags & ATA_TFLAG_WRITE))) {
- /* all data read */
- status = ata_wait_idle(ap);
- goto fsm_start;
- }
- }
-
- poll_next = 1;
- break;
-
- case HSM_ST_LAST:
- if (unlikely(!ata_ok(status))) {
- qc->err_mask |= __ac_err_mask(status);
- ap->hsm_task_state = HSM_ST_ERR;
- goto fsm_start;
- }
-
- /* no more data to transfer */
- DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
- ap->print_id, qc->dev->devno, status);
-
- WARN_ON(qc->err_mask);
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- /* complete taskfile transaction */
- ata_hsm_qc_complete(qc, in_wq);
-
- poll_next = 0;
- break;
-
- case HSM_ST_ERR:
- /* make sure qc->err_mask is available to
- * know what's wrong and recover
- */
- WARN_ON(qc->err_mask == 0);
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- /* complete taskfile transaction */
- ata_hsm_qc_complete(qc, in_wq);
-
- poll_next = 0;
- break;
- default:
- poll_next = 0;
- BUG();
- }
-
- return poll_next;
-}
-
-static void ata_pio_task(struct work_struct *work)
-{
- struct ata_port *ap =
- container_of(work, struct ata_port, port_task.work);
- struct ata_queued_cmd *qc = ap->port_task_data;
- u8 status;
- int poll_next;
-
-fsm_start:
- WARN_ON(ap->hsm_task_state == HSM_ST_IDLE);
-
- /*
- * This is purely heuristic. This is a fast path.
- * Sometimes when we enter, BSY will be cleared in
- * a chk-status or two. If not, the drive is probably seeking
- * or something. Snooze for a couple msecs, then
- * chk-status again. If still busy, queue delayed work.
- */
- status = ata_busy_wait(ap, ATA_BUSY, 5);
- if (status & ATA_BUSY) {
- msleep(2);
- status = ata_busy_wait(ap, ATA_BUSY, 10);
- if (status & ATA_BUSY) {
- ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
- return;
- }
- }
-
- /* move the HSM */
- poll_next = ata_hsm_move(ap, qc, status, 1);
-
- /* another command or interrupt handler
- * may be running at this point.
- */
- if (poll_next)
- goto fsm_start;
-}
-
-/**
* ata_qc_new - Request an available ATA command, for queueing
* @ap: Port associated with device @dev
* @dev: Device from whom we request an available command structure
@@ -5812,7 +4549,7 @@
struct ata_port *ap = qc->ap;
qc->result_tf.flags = qc->tf.flags;
- ap->ops->tf_read(ap, &qc->result_tf);
+ ap->ops->qc_fill_rtf(qc);
}
static void ata_verify_xfer(struct ata_queued_cmd *qc)
@@ -5922,7 +4659,6 @@
* ata_qc_complete_multiple - Complete multiple qcs successfully
* @ap: port in question
* @qc_active: new qc_active mask
- * @finish_qc: LLDD callback invoked before completing a qc
*
* Complete in-flight commands. This functions is meant to be
* called from low-level driver's interrupt routine to complete
@@ -5935,8 +4671,7 @@
* RETURNS:
* Number of completed commands on success, -errno otherwise.
*/
-int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active,
- void (*finish_qc)(struct ata_queued_cmd *))
+int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active)
{
int nr_done = 0;
u32 done_mask;
@@ -5957,8 +4692,6 @@
continue;
if ((qc = ata_qc_from_tag(ap, i))) {
- if (finish_qc)
- finish_qc(qc);
ata_qc_complete(qc);
nr_done++;
}
@@ -6017,9 +4750,9 @@
if (ata_sg_setup(qc))
goto sg_err;
- /* if device is sleeping, schedule softreset and abort the link */
+ /* if device is sleeping, schedule reset and abort the link */
if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
- link->eh_info.action |= ATA_EH_SOFTRESET;
+ link->eh_info.action |= ATA_EH_RESET;
ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
ata_link_abort(link);
return;
@@ -6039,285 +4772,6 @@
}
/**
- * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
- * @qc: command to issue to device
- *
- * Using various libata functions and hooks, this function
- * starts an ATA command. ATA commands are grouped into
- * classes called "protocols", and issuing each type of protocol
- * is slightly different.
- *
- * May be used as the qc_issue() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- * RETURNS:
- * Zero on success, AC_ERR_* mask on failure
- */
-
-unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
-
- /* Use polling pio if the LLD doesn't handle
- * interrupt driven pio and atapi CDB interrupt.
- */
- if (ap->flags & ATA_FLAG_PIO_POLLING) {
- switch (qc->tf.protocol) {
- case ATA_PROT_PIO:
- case ATA_PROT_NODATA:
- case ATAPI_PROT_PIO:
- case ATAPI_PROT_NODATA:
- qc->tf.flags |= ATA_TFLAG_POLLING;
- break;
- case ATAPI_PROT_DMA:
- if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
- /* see ata_dma_blacklisted() */
- BUG();
- break;
- default:
- break;
- }
- }
-
- /* select the device */
- ata_dev_select(ap, qc->dev->devno, 1, 0);
-
- /* start the command */
- switch (qc->tf.protocol) {
- case ATA_PROT_NODATA:
- if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_qc_set_polling(qc);
-
- ata_tf_to_host(ap, &qc->tf);
- ap->hsm_task_state = HSM_ST_LAST;
-
- if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_pio_queue_task(ap, qc, 0);
-
- break;
-
- case ATA_PROT_DMA:
- WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
-
- ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
- ap->ops->bmdma_setup(qc); /* set up bmdma */
- ap->ops->bmdma_start(qc); /* initiate bmdma */
- ap->hsm_task_state = HSM_ST_LAST;
- break;
-
- case ATA_PROT_PIO:
- if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_qc_set_polling(qc);
-
- ata_tf_to_host(ap, &qc->tf);
-
- if (qc->tf.flags & ATA_TFLAG_WRITE) {
- /* PIO data out protocol */
- ap->hsm_task_state = HSM_ST_FIRST;
- ata_pio_queue_task(ap, qc, 0);
-
- /* always send first data block using
- * the ata_pio_task() codepath.
- */
- } else {
- /* PIO data in protocol */
- ap->hsm_task_state = HSM_ST;
-
- if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_pio_queue_task(ap, qc, 0);
-
- /* if polling, ata_pio_task() handles the rest.
- * otherwise, interrupt handler takes over from here.
- */
- }
-
- break;
-
- case ATAPI_PROT_PIO:
- case ATAPI_PROT_NODATA:
- if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_qc_set_polling(qc);
-
- ata_tf_to_host(ap, &qc->tf);
-
- ap->hsm_task_state = HSM_ST_FIRST;
-
- /* send cdb by polling if no cdb interrupt */
- if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
- (qc->tf.flags & ATA_TFLAG_POLLING))
- ata_pio_queue_task(ap, qc, 0);
- break;
-
- case ATAPI_PROT_DMA:
- WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
-
- ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
- ap->ops->bmdma_setup(qc); /* set up bmdma */
- ap->hsm_task_state = HSM_ST_FIRST;
-
- /* send cdb by polling if no cdb interrupt */
- if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- ata_pio_queue_task(ap, qc, 0);
- break;
-
- default:
- WARN_ON(1);
- return AC_ERR_SYSTEM;
- }
-
- return 0;
-}
-
-/**
- * ata_host_intr - Handle host interrupt for given (port, task)
- * @ap: Port on which interrupt arrived (possibly...)
- * @qc: Taskfile currently active in engine
- *
- * Handle host interrupt for given queued command. Currently,
- * only DMA interrupts are handled. All other commands are
- * handled via polling with interrupts disabled (nIEN bit).
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- *
- * RETURNS:
- * One if interrupt was handled, zero if not (shared irq).
- */
-
-inline unsigned int ata_host_intr(struct ata_port *ap,
- struct ata_queued_cmd *qc)
-{
- struct ata_eh_info *ehi = &ap->link.eh_info;
- u8 status, host_stat = 0;
-
- VPRINTK("ata%u: protocol %d task_state %d\n",
- ap->print_id, qc->tf.protocol, ap->hsm_task_state);
-
- /* Check whether we are expecting interrupt in this state */
- switch (ap->hsm_task_state) {
- case HSM_ST_FIRST:
- /* Some pre-ATAPI-4 devices assert INTRQ
- * at this state when ready to receive CDB.
- */
-
- /* Check the ATA_DFLAG_CDB_INTR flag is enough here.
- * The flag was turned on only for atapi devices. No
- * need to check ata_is_atapi(qc->tf.protocol) again.
- */
- if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- goto idle_irq;
- break;
- case HSM_ST_LAST:
- if (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA) {
- /* check status of DMA engine */
- host_stat = ap->ops->bmdma_status(ap);
- VPRINTK("ata%u: host_stat 0x%X\n",
- ap->print_id, host_stat);
-
- /* if it's not our irq... */
- if (!(host_stat & ATA_DMA_INTR))
- goto idle_irq;
-
- /* before we do anything else, clear DMA-Start bit */
- ap->ops->bmdma_stop(qc);
-
- if (unlikely(host_stat & ATA_DMA_ERR)) {
- /* error when transfering data to/from memory */
- qc->err_mask |= AC_ERR_HOST_BUS;
- ap->hsm_task_state = HSM_ST_ERR;
- }
- }
- break;
- case HSM_ST:
- break;
- default:
- goto idle_irq;
- }
-
- /* check altstatus */
- status = ata_altstatus(ap);
- if (status & ATA_BUSY)
- goto idle_irq;
-
- /* check main status, clearing INTRQ */
- status = ata_chk_status(ap);
- if (unlikely(status & ATA_BUSY))
- goto idle_irq;
-
- /* ack bmdma irq events */
- ap->ops->irq_clear(ap);
-
- ata_hsm_move(ap, qc, status, 0);
-
- if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA))
- ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
-
- return 1; /* irq handled */
-
-idle_irq:
- ap->stats.idle_irq++;
-
-#ifdef ATA_IRQ_TRAP
- if ((ap->stats.idle_irq % 1000) == 0) {
- ata_chk_status(ap);
- ap->ops->irq_clear(ap);
- ata_port_printk(ap, KERN_WARNING, "irq trap\n");
- return 1;
- }
-#endif
- return 0; /* irq not handled */
-}
-
-/**
- * ata_interrupt - Default ATA host interrupt handler
- * @irq: irq line (unused)
- * @dev_instance: pointer to our ata_host information structure
- *
- * Default interrupt handler for PCI IDE devices. Calls
- * ata_host_intr() for each port that is not disabled.
- *
- * LOCKING:
- * Obtains host lock during operation.
- *
- * RETURNS:
- * IRQ_NONE or IRQ_HANDLED.
- */
-
-irqreturn_t ata_interrupt(int irq, void *dev_instance)
-{
- struct ata_host *host = dev_instance;
- unsigned int i;
- unsigned int handled = 0;
- unsigned long flags;
-
- /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
- spin_lock_irqsave(&host->lock, flags);
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap;
-
- ap = host->ports[i];
- if (ap &&
- !(ap->flags & ATA_FLAG_DISABLED)) {
- struct ata_queued_cmd *qc;
-
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
- (qc->flags & ATA_QCFLAG_ACTIVE))
- handled |= ata_host_intr(ap, qc);
- }
- }
-
- spin_unlock_irqrestore(&host->lock, flags);
-
- return IRQ_RETVAL(handled);
-}
-
-/**
* sata_scr_valid - test whether SCRs are accessible
* @link: ATA link to test SCR accessibility for
*
@@ -6475,32 +4929,6 @@
return 0;
}
-int ata_flush_cache(struct ata_device *dev)
-{
- unsigned int err_mask;
- u8 cmd;
-
- if (!ata_try_flush_cache(dev))
- return 0;
-
- if (dev->flags & ATA_DFLAG_FLUSH_EXT)
- cmd = ATA_CMD_FLUSH_EXT;
- else
- cmd = ATA_CMD_FLUSH;
-
- /* This is wrong. On a failed flush we get back the LBA of the lost
- sector and we should (assuming it wasn't aborted as unknown) issue
- a further flush command to continue the writeback until it
- does not error */
- err_mask = ata_do_simple_cmd(dev, cmd);
- if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to flush cache\n");
- return -EIO;
- }
-
- return 0;
-}
-
#ifdef CONFIG_PM
static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
unsigned int action, unsigned int ehi_flags,
@@ -6596,7 +5024,7 @@
*/
void ata_host_resume(struct ata_host *host)
{
- ata_host_request_pm(host, PMSG_ON, ATA_EH_SOFTRESET,
+ ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
host->dev->power.power_state = PMSG_ON;
@@ -6771,7 +5199,9 @@
ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
#endif
+#ifdef CONFIG_ATA_SFF
INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
+#endif
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
INIT_LIST_HEAD(&ap->eh_done_q);
@@ -6921,8 +5351,6 @@
if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
host->ops = pi->port_ops;
- if (!host->private_data && pi->private_data)
- host->private_data = pi->private_data;
}
return host;
@@ -6947,6 +5375,56 @@
}
/**
+ * ata_finalize_port_ops - finalize ata_port_operations
+ * @ops: ata_port_operations to finalize
+ *
+ * An ata_port_operations can inherit from another ops and that
+ * ops can again inherit from another. This can go on as many
+ * times as necessary as long as there is no loop in the
+ * inheritance chain.
+ *
+ * Ops tables are finalized when the host is started. NULL or
+ * unspecified entries are inherited from the closet ancestor
+ * which has the method and the entry is populated with it.
+ * After finalization, the ops table directly points to all the
+ * methods and ->inherits is no longer necessary and cleared.
+ *
+ * Using ATA_OP_NULL, inheriting ops can force a method to NULL.
+ *
+ * LOCKING:
+ * None.
+ */
+static void ata_finalize_port_ops(struct ata_port_operations *ops)
+{
+ static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ const struct ata_port_operations *cur;
+ void **begin = (void **)ops;
+ void **end = (void **)&ops->inherits;
+ void **pp;
+
+ if (!ops || !ops->inherits)
+ return;
+
+ spin_lock(&lock);
+
+ for (cur = ops->inherits; cur; cur = cur->inherits) {
+ void **inherit = (void **)cur;
+
+ for (pp = begin; pp < end; pp++, inherit++)
+ if (!*pp)
+ *pp = *inherit;
+ }
+
+ for (pp = begin; pp < end; pp++)
+ if (IS_ERR(*pp))
+ *pp = NULL;
+
+ ops->inherits = NULL;
+
+ spin_unlock(&lock);
+}
+
+/**
* ata_host_start - start and freeze ports of an ATA host
* @host: ATA host to start ports for
*
@@ -6971,9 +5449,13 @@
if (host->flags & ATA_HOST_STARTED)
return 0;
+ ata_finalize_port_ops(host->ops);
+
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
+ ata_finalize_port_ops(ap->ops);
+
if (!host->ops && !ata_port_is_dummy(ap))
host->ops = ap->ops;
@@ -7035,7 +5517,7 @@
*/
/* KILLME - the only user left is ipr */
void ata_host_init(struct ata_host *host, struct device *dev,
- unsigned long flags, const struct ata_port_operations *ops)
+ unsigned long flags, struct ata_port_operations *ops)
{
spin_lock_init(&host->lock);
host->dev = dev;
@@ -7131,9 +5613,8 @@
/* kick EH for boot probing */
spin_lock_irqsave(ap->lock, flags);
- ehi->probe_mask =
- (1 << ata_link_max_devices(&ap->link)) - 1;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->probe_mask |= ATA_ALL_DEVICES;
+ ehi->action |= ATA_EH_RESET;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
@@ -7298,33 +5779,6 @@
ata_acpi_dissociate(host);
}
-/**
- * ata_std_ports - initialize ioaddr with standard port offsets.
- * @ioaddr: IO address structure to be initialized
- *
- * Utility function which initializes data_addr, error_addr,
- * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
- * device_addr, status_addr, and command_addr to standard offsets
- * relative to cmd_addr.
- *
- * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
- */
-
-void ata_std_ports(struct ata_ioports *ioaddr)
-{
- ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
- ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
- ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE;
- ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT;
- ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL;
- ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM;
- ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH;
- ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE;
- ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
- ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
-}
-
-
#ifdef CONFIG_PCI
/**
@@ -7711,33 +6165,20 @@
/*
* Dummy port_ops
*/
-static void ata_dummy_noret(struct ata_port *ap) { }
-static int ata_dummy_ret0(struct ata_port *ap) { return 0; }
-static void ata_dummy_qc_noret(struct ata_queued_cmd *qc) { }
-
-static u8 ata_dummy_check_status(struct ata_port *ap)
-{
- return ATA_DRDY;
-}
-
static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
{
return AC_ERR_SYSTEM;
}
-const struct ata_port_operations ata_dummy_port_ops = {
- .check_status = ata_dummy_check_status,
- .check_altstatus = ata_dummy_check_status,
- .dev_select = ata_noop_dev_select,
+static void ata_dummy_error_handler(struct ata_port *ap)
+{
+ /* truly dummy */
+}
+
+struct ata_port_operations ata_dummy_port_ops = {
.qc_prep = ata_noop_qc_prep,
.qc_issue = ata_dummy_qc_issue,
- .freeze = ata_dummy_noret,
- .thaw = ata_dummy_noret,
- .error_handler = ata_dummy_noret,
- .post_internal_cmd = ata_dummy_qc_noret,
- .irq_clear = ata_dummy_noret,
- .port_start = ata_dummy_ret0,
- .port_stop = ata_dummy_noret,
+ .error_handler = ata_dummy_error_handler,
};
const struct ata_port_info ata_dummy_port_info = {
@@ -7753,10 +6194,11 @@
EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
EXPORT_SYMBOL_GPL(sata_deb_timing_long);
+EXPORT_SYMBOL_GPL(ata_base_port_ops);
+EXPORT_SYMBOL_GPL(sata_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
-EXPORT_SYMBOL_GPL(ata_std_ports);
EXPORT_SYMBOL_GPL(ata_host_init);
EXPORT_SYMBOL_GPL(ata_host_alloc);
EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
@@ -7765,15 +6207,10 @@
EXPORT_SYMBOL_GPL(ata_host_activate);
EXPORT_SYMBOL_GPL(ata_host_detach);
EXPORT_SYMBOL_GPL(ata_sg_init);
-EXPORT_SYMBOL_GPL(ata_hsm_move);
EXPORT_SYMBOL_GPL(ata_qc_complete);
EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
-EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
-EXPORT_SYMBOL_GPL(ata_tf_load);
-EXPORT_SYMBOL_GPL(ata_tf_read);
-EXPORT_SYMBOL_GPL(ata_noop_dev_select);
-EXPORT_SYMBOL_GPL(ata_std_dev_select);
EXPORT_SYMBOL_GPL(sata_print_link_status);
+EXPORT_SYMBOL_GPL(atapi_cmd_type);
EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
EXPORT_SYMBOL_GPL(ata_pack_xfermask);
@@ -7783,37 +6220,17 @@
EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
EXPORT_SYMBOL_GPL(ata_mode_string);
EXPORT_SYMBOL_GPL(ata_id_xfermask);
-EXPORT_SYMBOL_GPL(ata_check_status);
-EXPORT_SYMBOL_GPL(ata_altstatus);
-EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
-EXPORT_SYMBOL_GPL(ata_sff_port_start);
-EXPORT_SYMBOL_GPL(ata_interrupt);
EXPORT_SYMBOL_GPL(ata_do_set_mode);
-EXPORT_SYMBOL_GPL(ata_data_xfer);
-EXPORT_SYMBOL_GPL(ata_data_xfer_noirq);
EXPORT_SYMBOL_GPL(ata_std_qc_defer);
-EXPORT_SYMBOL_GPL(ata_qc_prep);
-EXPORT_SYMBOL_GPL(ata_dumb_qc_prep);
EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
-EXPORT_SYMBOL_GPL(ata_bmdma_setup);
-EXPORT_SYMBOL_GPL(ata_bmdma_start);
-EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
-EXPORT_SYMBOL_GPL(ata_bmdma_status);
-EXPORT_SYMBOL_GPL(ata_bmdma_stop);
-EXPORT_SYMBOL_GPL(ata_bmdma_freeze);
-EXPORT_SYMBOL_GPL(ata_bmdma_thaw);
-EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh);
-EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
-EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
EXPORT_SYMBOL_GPL(ata_port_probe);
EXPORT_SYMBOL_GPL(ata_dev_disable);
EXPORT_SYMBOL_GPL(sata_set_spd);
+EXPORT_SYMBOL_GPL(ata_wait_after_reset);
EXPORT_SYMBOL_GPL(sata_link_debounce);
EXPORT_SYMBOL_GPL(sata_link_resume);
-EXPORT_SYMBOL_GPL(ata_bus_reset);
EXPORT_SYMBOL_GPL(ata_std_prereset);
-EXPORT_SYMBOL_GPL(ata_std_softreset);
EXPORT_SYMBOL_GPL(sata_link_hardreset);
EXPORT_SYMBOL_GPL(sata_std_hardreset);
EXPORT_SYMBOL_GPL(ata_std_postreset);
@@ -7822,15 +6239,11 @@
EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_wait_register);
-EXPORT_SYMBOL_GPL(ata_busy_sleep);
-EXPORT_SYMBOL_GPL(ata_wait_after_reset);
-EXPORT_SYMBOL_GPL(ata_wait_ready);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
-EXPORT_SYMBOL_GPL(ata_host_intr);
EXPORT_SYMBOL_GPL(sata_scr_valid);
EXPORT_SYMBOL_GPL(sata_scr_read);
EXPORT_SYMBOL_GPL(sata_scr_write);
@@ -7853,11 +6266,6 @@
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
-EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
-EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_activate_sff_host);
-EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
#ifdef CONFIG_PM
EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
@@ -7865,16 +6273,8 @@
EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
EXPORT_SYMBOL_GPL(ata_pci_device_resume);
#endif /* CONFIG_PM */
-EXPORT_SYMBOL_GPL(ata_pci_default_filter);
-EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
#endif /* CONFIG_PCI */
-EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
-EXPORT_SYMBOL_GPL(sata_pmp_std_prereset);
-EXPORT_SYMBOL_GPL(sata_pmp_std_hardreset);
-EXPORT_SYMBOL_GPL(sata_pmp_std_postreset);
-EXPORT_SYMBOL_GPL(sata_pmp_do_eh);
-
EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
@@ -7892,8 +6292,7 @@
EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
EXPORT_SYMBOL_GPL(ata_do_eh);
-EXPORT_SYMBOL_GPL(ata_irq_on);
-EXPORT_SYMBOL_GPL(ata_dev_try_classify);
+EXPORT_SYMBOL_GPL(ata_std_error_handler);
EXPORT_SYMBOL_GPL(ata_cable_40wire);
EXPORT_SYMBOL_GPL(ata_cable_80wire);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index a583032..d94359a 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -873,9 +873,9 @@
if (rc == 0)
sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf);
- if (!ap->nr_pmp_links || rc) {
+ if (!sata_pmp_attached(ap) || rc) {
/* PMP is not attached or SNTF is not available */
- if (!ap->nr_pmp_links) {
+ if (!sata_pmp_attached(ap)) {
/* PMP is not attached. Check whether ATAPI
* AN is configured. If so, notify media
* change.
@@ -1079,19 +1079,6 @@
spin_lock_irqsave(ap->lock, flags);
- /* Reset is represented by combination of actions and EHI
- * flags. Suck in all related bits before clearing eh_info to
- * avoid losing requested action.
- */
- if (action & ATA_EH_RESET_MASK) {
- ehc->i.action |= ehi->action & ATA_EH_RESET_MASK;
- ehc->i.flags |= ehi->flags & ATA_EHI_RESET_MODIFIER_MASK;
-
- /* make sure all reset actions are cleared & clear EHI flags */
- action |= ATA_EH_RESET_MASK;
- ehi->flags &= ~ATA_EHI_RESET_MODIFIER_MASK;
- }
-
ata_eh_clear_action(link, dev, ehi, action);
if (!(ehc->i.flags & ATA_EHI_QUIET))
@@ -1117,12 +1104,6 @@
{
struct ata_eh_context *ehc = &link->eh_context;
- /* if reset is complete, clear all reset actions & reset modifier */
- if (action & ATA_EH_RESET_MASK) {
- action |= ATA_EH_RESET_MASK;
- ehc->i.flags &= ~ATA_EHI_RESET_MODIFIER_MASK;
- }
-
ata_eh_clear_action(link, dev, &ehc->i, action);
}
@@ -1329,20 +1310,20 @@
if (serror & SERR_PERSISTENT) {
err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_HARDRESET;
+ action |= ATA_EH_RESET;
}
if (serror &
(SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) {
err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_SOFTRESET;
+ action |= ATA_EH_RESET;
}
if (serror & SERR_PROTOCOL) {
err_mask |= AC_ERR_HSM;
- action |= ATA_EH_SOFTRESET;
+ action |= ATA_EH_RESET;
}
if (serror & SERR_INTERNAL) {
err_mask |= AC_ERR_SYSTEM;
- action |= ATA_EH_HARDRESET;
+ action |= ATA_EH_RESET;
}
/* Determine whether a hotplug event has occurred. Both
@@ -1448,7 +1429,7 @@
if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) {
qc->err_mask |= AC_ERR_HSM;
- return ATA_EH_SOFTRESET;
+ return ATA_EH_RESET;
}
if (stat & (ATA_ERR | ATA_DF))
@@ -1484,7 +1465,7 @@
}
if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS))
- action |= ATA_EH_SOFTRESET;
+ action |= ATA_EH_RESET;
return action;
}
@@ -1685,7 +1666,7 @@
if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
/* speed down SATA link speed if possible */
if (sata_down_spd_limit(link) == 0) {
- action |= ATA_EH_HARDRESET;
+ action |= ATA_EH_RESET;
goto done;
}
@@ -1705,7 +1686,7 @@
dev->spdn_cnt++;
if (ata_down_xfermask_limit(dev, sel) == 0) {
- action |= ATA_EH_SOFTRESET;
+ action |= ATA_EH_RESET;
goto done;
}
}
@@ -1719,7 +1700,7 @@
(dev->xfer_shift != ATA_SHIFT_PIO)) {
if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
dev->spdn_cnt = 0;
- action |= ATA_EH_SOFTRESET;
+ action |= ATA_EH_RESET;
goto done;
}
}
@@ -1764,9 +1745,9 @@
ehc->i.serror |= serror;
ata_eh_analyze_serror(link);
} else if (rc != -EOPNOTSUPP) {
- /* SError read failed, force hardreset and probing */
- ata_ehi_schedule_probe(&ehc->i);
- ehc->i.action |= ATA_EH_HARDRESET;
+ /* SError read failed, force reset and probing */
+ ehc->i.probe_mask |= ATA_ALL_DEVICES;
+ ehc->i.action |= ATA_EH_RESET;
ehc->i.err_mask |= AC_ERR_OTHER;
}
@@ -1804,6 +1785,11 @@
if (qc->flags & ATA_QCFLAG_SENSE_VALID)
qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
+ /* determine whether the command is worth retrying */
+ if (!(qc->err_mask & AC_ERR_INVALID) &&
+ ((qc->flags & ATA_QCFLAG_IO) || qc->err_mask != AC_ERR_DEV))
+ qc->flags |= ATA_QCFLAG_RETRY;
+
/* accumulate error info */
ehc->i.dev = qc->dev;
all_err_mask |= qc->err_mask;
@@ -1814,7 +1800,7 @@
/* enforce default EH actions */
if (ap->pflags & ATA_PFLAG_FROZEN ||
all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT))
- ehc->i.action |= ATA_EH_SOFTRESET;
+ ehc->i.action |= ATA_EH_RESET;
else if (((eflags & ATA_EFLAG_IS_IO) && all_err_mask) ||
(!(eflags & ATA_EFLAG_IS_IO) && (all_err_mask & ~AC_ERR_DEV)))
ehc->i.action |= ATA_EH_REVALIDATE;
@@ -1867,7 +1853,7 @@
/* Autopsy of fanout ports can affect host link autopsy.
* Perform host link autopsy last.
*/
- if (ap->nr_pmp_links)
+ if (sata_pmp_attached(ap))
ata_eh_link_autopsy(&ap->link);
}
@@ -2066,41 +2052,29 @@
classes[dev->devno] = ATA_DEV_UNKNOWN;
rc = reset(link, classes, deadline);
- if (rc)
- return rc;
- /* If any class isn't ATA_DEV_UNKNOWN, consider classification
- * is complete and convert all ATA_DEV_UNKNOWN to
- * ATA_DEV_NONE.
- */
+ /* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
ata_link_for_each_dev(dev, link)
- if (classes[dev->devno] != ATA_DEV_UNKNOWN)
- break;
+ if (classes[dev->devno] == ATA_DEV_UNKNOWN)
+ classes[dev->devno] = ATA_DEV_NONE;
- if (dev) {
- ata_link_for_each_dev(dev, link) {
- if (classes[dev->devno] == ATA_DEV_UNKNOWN)
- classes[dev->devno] = ATA_DEV_NONE;
- }
- }
-
- return 0;
+ return rc;
}
static int ata_eh_followup_srst_needed(struct ata_link *link,
int rc, int classify,
const unsigned int *classes)
{
- if (link->flags & ATA_LFLAG_NO_SRST)
+ if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
return 0;
- if (rc == -EAGAIN)
- return 1;
+ if (rc == -EAGAIN) {
+ if (classify)
+ return 1;
+ rc = 0;
+ }
if (rc != 0)
return 0;
- if ((link->ap->flags & ATA_FLAG_PMP) && ata_is_host_link(link))
- return 1;
- if (classify && !(link->flags & ATA_LFLAG_ASSUME_CLASS) &&
- classes[0] == ATA_DEV_UNKNOWN)
+ if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
return 1;
return 0;
}
@@ -2118,7 +2092,6 @@
int try = 0;
struct ata_device *dev;
unsigned long deadline, now;
- unsigned int tmp_action;
ata_reset_fn_t reset;
unsigned long flags;
u32 sstatus;
@@ -2129,7 +2102,7 @@
ap->pflags |= ATA_PFLAG_RESETTING;
spin_unlock_irqrestore(ap->lock, flags);
- ata_eh_about_to_do(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+ ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
ata_link_for_each_dev(dev, link) {
/* If we issue an SRST then an ATA drive (not ATAPI)
@@ -2159,17 +2132,20 @@
goto done;
}
- /* Determine which reset to use and record in ehc->i.action.
- * prereset() may examine and modify it.
- */
- if (softreset && (!hardreset || (!(lflags & ATA_LFLAG_NO_SRST) &&
- !sata_set_spd_needed(link) &&
- !(ehc->i.action & ATA_EH_HARDRESET))))
- tmp_action = ATA_EH_SOFTRESET;
- else
- tmp_action = ATA_EH_HARDRESET;
-
- ehc->i.action = (ehc->i.action & ~ATA_EH_RESET_MASK) | tmp_action;
+ /* prefer hardreset */
+ ehc->i.action &= ~ATA_EH_RESET;
+ if (hardreset) {
+ reset = hardreset;
+ ehc->i.action = ATA_EH_HARDRESET;
+ } else if (softreset) {
+ reset = softreset;
+ ehc->i.action = ATA_EH_SOFTRESET;
+ } else {
+ ata_link_printk(link, KERN_ERR, "BUG: no reset method, "
+ "please report to linux-ide@vger.kernel.org\n");
+ dump_stack();
+ return -EINVAL;
+ }
if (prereset) {
rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT);
@@ -2177,7 +2153,7 @@
if (rc == -ENOENT) {
ata_link_printk(link, KERN_DEBUG,
"port disabled. ignoring.\n");
- ehc->i.action &= ~ATA_EH_RESET_MASK;
+ ehc->i.action &= ~ATA_EH_RESET;
ata_link_for_each_dev(dev, link)
classes[dev->devno] = ATA_DEV_NONE;
@@ -2190,12 +2166,8 @@
}
}
- /* prereset() might have modified ehc->i.action */
- if (ehc->i.action & ATA_EH_HARDRESET)
- reset = hardreset;
- else if (ehc->i.action & ATA_EH_SOFTRESET)
- reset = softreset;
- else {
+ /* prereset() might have cleared ATA_EH_RESET */
+ if (!(ehc->i.action & ATA_EH_RESET)) {
/* prereset told us not to reset, bang classes and return */
ata_link_for_each_dev(dev, link)
classes[dev->devno] = ATA_DEV_NONE;
@@ -2203,14 +2175,6 @@
goto out;
}
- /* did prereset() screw up? if so, fix up to avoid oopsing */
- if (!reset) {
- if (softreset)
- reset = softreset;
- else
- reset = hardreset;
- }
-
retry:
deadline = jiffies + ata_eh_reset_timeouts[try++];
@@ -2240,7 +2204,7 @@
goto fail;
}
- ata_eh_about_to_do(link, NULL, ATA_EH_RESET_MASK);
+ ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
rc = ata_do_reset(link, reset, classes, deadline);
}
@@ -2248,21 +2212,6 @@
if (rc && rc != -EAGAIN)
goto fail;
- /* was classification successful? */
- if (classify && classes[0] == ATA_DEV_UNKNOWN &&
- !(lflags & ATA_LFLAG_ASSUME_CLASS)) {
- if (try < max_tries) {
- ata_link_printk(link, KERN_WARNING,
- "classification failed\n");
- rc = -EINVAL;
- goto fail;
- }
-
- ata_link_printk(link, KERN_WARNING,
- "classfication failed, assuming ATA\n");
- lflags |= ATA_LFLAG_ASSUME_ATA;
- }
-
done:
ata_link_for_each_dev(dev, link) {
/* After the reset, the device state is PIO 0 and the
@@ -2290,7 +2239,7 @@
postreset(link, classes);
/* reset successful, schedule revalidation */
- ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
+ ata_eh_done(link, NULL, ATA_EH_RESET);
ehc->i.action |= ATA_EH_REVALIDATE;
rc = 0;
@@ -2305,6 +2254,11 @@
return rc;
fail:
+ /* if SCR isn't accessible on a fan-out port, PMP needs to be reset */
+ if (!ata_is_host_link(link) &&
+ sata_scr_read(link, SCR_STATUS, &sstatus))
+ rc = -ERESTART;
+
if (rc == -ERESTART || try >= max_tries)
goto out;
@@ -2515,6 +2469,7 @@
static int ata_eh_skip_recovery(struct ata_link *link)
{
+ struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev;
@@ -2522,9 +2477,13 @@
if (link->flags & ATA_LFLAG_DISABLED)
return 1;
- /* thaw frozen port, resume link and recover failed devices */
- if ((link->ap->pflags & ATA_PFLAG_FROZEN) ||
- (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_link_nr_enabled(link))
+ /* thaw frozen port and recover failed devices */
+ if ((ap->pflags & ATA_PFLAG_FROZEN) || ata_link_nr_enabled(link))
+ return 0;
+
+ /* reset at least once if reset is requested */
+ if ((ehc->i.action & ATA_EH_RESET) &&
+ !(ehc->i.flags & ATA_EHI_DID_RESET))
return 0;
/* skip if class codes for all vacant slots are ATA_DEV_NONE */
@@ -2548,7 +2507,7 @@
ata_eh_detach_dev(dev);
ata_dev_init(dev);
ehc->did_probe_mask |= (1 << dev->devno);
- ehc->i.action |= ATA_EH_SOFTRESET;
+ ehc->i.action |= ATA_EH_RESET;
ehc->saved_xfer_mode[dev->devno] = 0;
ehc->saved_ncq_enabled &= ~(1 << dev->devno);
@@ -2592,12 +2551,7 @@
return 1;
} else {
- /* soft didn't work? be haaaaard */
- if (ehc->i.flags & ATA_EHI_DID_RESET)
- ehc->i.action |= ATA_EH_HARDRESET;
- else
- ehc->i.action |= ATA_EH_SOFTRESET;
-
+ ehc->i.action |= ATA_EH_RESET;
return 0;
}
}
@@ -2690,7 +2644,7 @@
ehc->i.action = 0;
/* do we need to reset? */
- if (ehc->i.action & ATA_EH_RESET_MASK)
+ if (ehc->i.action & ATA_EH_RESET)
reset = 1;
ata_link_for_each_dev(dev, link)
@@ -2702,13 +2656,13 @@
/* if PMP is attached, this function only deals with
* downstream links, port should stay thawed.
*/
- if (!ap->nr_pmp_links)
+ if (!sata_pmp_attached(ap))
ata_eh_freeze_port(ap);
ata_port_for_each_link(link, ap) {
struct ata_eh_context *ehc = &link->eh_context;
- if (!(ehc->i.action & ATA_EH_RESET_MASK))
+ if (!(ehc->i.action & ATA_EH_RESET))
continue;
rc = ata_eh_reset(link, ata_link_nr_vacant(link),
@@ -2721,7 +2675,7 @@
}
}
- if (!ap->nr_pmp_links)
+ if (!sata_pmp_attached(ap))
ata_eh_thaw_port(ap);
}
@@ -2765,7 +2719,7 @@
/* PMP reset requires working host port.
* Can't retry if it's frozen.
*/
- if (ap->nr_pmp_links)
+ if (sata_pmp_attached(ap))
goto out;
break;
}
@@ -2817,18 +2771,11 @@
/* FIXME: Once EH migration is complete,
* generate sense data in this function,
* considering both err_mask and tf.
- *
- * There's no point in retrying invalid
- * (detected by libata) and non-IO device
- * errors (rejected by device). Finish them
- * immediately.
*/
- if ((qc->err_mask & AC_ERR_INVALID) ||
- (!(qc->flags & ATA_QCFLAG_IO) &&
- qc->err_mask == AC_ERR_DEV))
- ata_eh_qc_complete(qc);
- else
+ if (qc->flags & ATA_QCFLAG_RETRY)
ata_eh_qc_retry(qc);
+ else
+ ata_eh_qc_complete(qc);
} else {
if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
ata_eh_qc_complete(qc);
@@ -2848,6 +2795,7 @@
/**
* ata_do_eh - do standard error handling
* @ap: host port to handle error for
+ *
* @prereset: prereset method (can be NULL)
* @softreset: softreset method (can be NULL)
* @hardreset: hardreset method (can be NULL)
@@ -2878,6 +2826,27 @@
ata_eh_finish(ap);
}
+/**
+ * ata_std_error_handler - standard error handler
+ * @ap: host port to handle error for
+ *
+ * Standard error handler
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+void ata_std_error_handler(struct ata_port *ap)
+{
+ struct ata_port_operations *ops = ap->ops;
+ ata_reset_fn_t hardreset = ops->hardreset;
+
+ /* ignore built-in hardreset if SCR access is not available */
+ if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link))
+ hardreset = NULL;
+
+ ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
+}
+
#ifdef CONFIG_PM
/**
* ata_eh_handle_port_suspend - perform port suspend operation
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index d91f509..ff1822a 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -11,6 +11,14 @@
#include <linux/libata.h>
#include "libata.h"
+const struct ata_port_operations sata_pmp_port_ops = {
+ .inherits = &sata_port_ops,
+ .pmp_prereset = ata_std_prereset,
+ .pmp_hardreset = sata_std_hardreset,
+ .pmp_postreset = ata_std_postreset,
+ .error_handler = sata_pmp_error_handler,
+};
+
/**
* sata_pmp_read - read PMP register
* @link: link to read PMP register for
@@ -176,140 +184,6 @@
}
/**
- * sata_pmp_std_prereset - prepare PMP link for reset
- * @link: link to be reset
- * @deadline: deadline jiffies for the operation
- *
- * @link is about to be reset. Initialize it.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline)
-{
- struct ata_eh_context *ehc = &link->eh_context;
- const unsigned long *timing = sata_ehc_deb_timing(ehc);
- int rc;
-
- /* force HRST? */
- if (link->flags & ATA_LFLAG_NO_SRST)
- ehc->i.action |= ATA_EH_HARDRESET;
-
- /* handle link resume */
- if ((ehc->i.flags & ATA_EHI_RESUME_LINK) &&
- (link->flags & ATA_LFLAG_HRST_TO_RESUME))
- ehc->i.action |= ATA_EH_HARDRESET;
-
- /* if we're about to do hardreset, nothing more to do */
- if (ehc->i.action & ATA_EH_HARDRESET)
- return 0;
-
- /* resume link */
- rc = sata_link_resume(link, timing, deadline);
- if (rc) {
- /* phy resume failed */
- ata_link_printk(link, KERN_WARNING, "failed to resume link "
- "for reset (errno=%d)\n", rc);
- return rc;
- }
-
- /* clear SError bits including .X which blocks the port when set */
- rc = sata_scr_write(link, SCR_ERROR, 0xffffffff);
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "failed to clear SError (errno=%d)\n", rc);
- return rc;
- }
-
- return 0;
-}
-
-/**
- * sata_pmp_std_hardreset - standard hardreset method for PMP link
- * @link: link to be reset
- * @class: resulting class of attached device
- * @deadline: deadline jiffies for the operation
- *
- * Hardreset PMP port @link. Note that this function doesn't
- * wait for BSY clearance. There simply isn't a generic way to
- * wait the event. Instead, this function return -EAGAIN thus
- * telling libata-EH to followup with softreset.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
- u32 tmp;
- int rc;
-
- DPRINTK("ENTER\n");
-
- /* do hardreset */
- rc = sata_link_hardreset(link, timing, deadline);
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "COMRESET failed (errno=%d)\n", rc);
- goto out;
- }
-
- /* clear SError bits including .X which blocks the port when set */
- rc = sata_scr_write(link, SCR_ERROR, 0xffffffff);
- if (rc) {
- ata_link_printk(link, KERN_ERR, "failed to clear SError "
- "during hardreset (errno=%d)\n", rc);
- goto out;
- }
-
- /* if device is present, follow up with srst to wait for !BSY */
- if (ata_link_online(link))
- rc = -EAGAIN;
- out:
- /* if SCR isn't accessible, we need to reset the PMP */
- if (rc && rc != -EAGAIN && sata_scr_read(link, SCR_STATUS, &tmp))
- rc = -ERESTART;
-
- DPRINTK("EXIT, rc=%d\n", rc);
- return rc;
-}
-
-/**
- * ata_std_postreset - standard postreset method for PMP link
- * @link: the target ata_link
- * @classes: classes of attached devices
- *
- * This function is invoked after a successful reset. Note that
- * the device might have been reset more than once using
- * different reset methods before postreset is invoked.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-void sata_pmp_std_postreset(struct ata_link *link, unsigned int *class)
-{
- u32 serror;
-
- DPRINTK("ENTER\n");
-
- /* clear SError */
- if (sata_scr_read(link, SCR_ERROR, &serror) == 0)
- sata_scr_write(link, SCR_ERROR, serror);
-
- /* print link status */
- sata_print_link_status(link);
-
- DPRINTK("EXIT\n");
-}
-
-/**
* sata_pmp_read_gscr - read GSCR block of SATA PMP
* @dev: PMP device
* @gscr: buffer to read GSCR block into
@@ -444,9 +318,8 @@
struct ata_eh_context *ehc = &link->eh_context;
link->flags = 0;
- ehc->i.probe_mask |= 1;
- ehc->i.action |= ATA_EH_SOFTRESET;
- ehc->i.flags |= ATA_EHI_RESUME_LINK;
+ ehc->i.probe_mask |= ATA_ALL_DEVICES;
+ ehc->i.action |= ATA_EH_RESET;
}
return 0;
@@ -462,9 +335,6 @@
if (vendor == 0x1095 && devid == 0x3726) {
/* sil3726 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* class code report is unreliable */
if (link->pmp < 5)
link->flags |= ATA_LFLAG_ASSUME_ATA;
@@ -477,9 +347,6 @@
} else if (vendor == 0x1095 && devid == 0x4723) {
/* sil4723 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* class code report is unreliable */
if (link->pmp < 2)
link->flags |= ATA_LFLAG_ASSUME_ATA;
@@ -492,9 +359,6 @@
} else if (vendor == 0x1095 && devid == 0x4726) {
/* sil4726 quirks */
ata_port_for_each_link(link, ap) {
- /* SError.N need a kick in the ass to get working */
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
-
/* Class code report is unreliable and SRST
* times out under certain configurations.
* Config device can be at port 0 or 5 and
@@ -522,13 +386,6 @@
* otherwise. Don't try hard to recover it.
*/
ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
- } else if (vendor == 0x11ab && devid == 0x4140) {
- /* Marvell 88SM4140 quirks. Fan-out ports require PHY
- * reset to work; other than that, it behaves very
- * nicely.
- */
- ata_port_for_each_link(link, ap)
- link->flags |= ATA_LFLAG_HRST_TO_RESUME;
}
}
@@ -554,7 +411,7 @@
int rc;
/* is it hanging off the right place? */
- if (!(ap->flags & ATA_FLAG_PMP)) {
+ if (!sata_pmp_supported(ap)) {
ata_dev_printk(dev, KERN_ERR,
"host does not support Port Multiplier\n");
return -EINVAL;
@@ -840,13 +697,12 @@
retry:
ehc->classes[0] = ATA_DEV_UNKNOWN;
- if (ehc->i.action & ATA_EH_RESET_MASK) {
+ if (ehc->i.action & ATA_EH_RESET) {
struct ata_link *tlink;
ata_eh_freeze_port(ap);
/* reset */
- ehc->i.action = ATA_EH_HARDRESET;
rc = ata_eh_reset(link, 0, prereset, softreset, hardreset,
postreset);
if (rc) {
@@ -858,8 +714,12 @@
ata_eh_thaw_port(ap);
/* PMP is reset, SErrors cannot be trusted, scan all */
- ata_port_for_each_link(tlink, ap)
- ata_ehi_schedule_probe(&tlink->eh_context.i);
+ ata_port_for_each_link(tlink, ap) {
+ struct ata_eh_context *ehc = &tlink->eh_context;
+
+ ehc->i.probe_mask |= ATA_ALL_DEVICES;
+ ehc->i.action |= ATA_EH_RESET;
+ }
}
/* If revalidation is requested, revalidate and reconfigure;
@@ -874,7 +734,7 @@
tries--;
if (rc == -ENODEV) {
- ehc->i.probe_mask |= 1;
+ ehc->i.probe_mask |= ATA_ALL_DEVICES;
detach = 1;
/* give it just two more chances */
tries = min(tries, 2);
@@ -890,11 +750,11 @@
reval_failed = 1;
ata_dev_printk(dev, KERN_WARNING,
- "retrying hardreset%s\n",
+ "retrying reset%s\n",
sleep ? " in 5 secs" : "");
if (sleep)
ssleep(5);
- ehc->i.action |= ATA_EH_HARDRESET;
+ ehc->i.action |= ATA_EH_RESET;
goto retry;
} else {
ata_dev_printk(dev, KERN_ERR, "failed to recover PMP "
@@ -938,10 +798,8 @@
/* Some PMPs require hardreset sequence to get
* SError.N working.
*/
- if ((link->flags & ATA_LFLAG_HRST_TO_RESUME) &&
- (link->eh_context.i.flags & ATA_EHI_RESUME_LINK))
- sata_link_hardreset(link, sata_deb_timing_normal,
- jiffies + ATA_TMOUT_INTERNAL_QUICK);
+ sata_link_hardreset(link, sata_deb_timing_normal,
+ jiffies + ATA_TMOUT_INTERNAL_QUICK, NULL, NULL);
/* unconditionally clear SError.N */
rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
@@ -987,14 +845,6 @@
/**
* sata_pmp_eh_recover - recover PMP-enabled port
* @ap: ATA port to recover
- * @prereset: prereset method (can be NULL)
- * @softreset: softreset method
- * @hardreset: hardreset method
- * @postreset: postreset method (can be NULL)
- * @pmp_prereset: PMP prereset method (can be NULL)
- * @pmp_softreset: PMP softreset method (can be NULL)
- * @pmp_hardreset: PMP hardreset method (can be NULL)
- * @pmp_postreset: PMP postreset method (can be NULL)
*
* Drive EH recovery operation for PMP enabled port @ap. This
* function recovers host and PMP ports with proper retrials and
@@ -1007,12 +857,9 @@
* RETURNS:
* 0 on success, -errno on failure.
*/
-static int sata_pmp_eh_recover(struct ata_port *ap,
- ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
- ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
- ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
- ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset)
+static int sata_pmp_eh_recover(struct ata_port *ap)
{
+ struct ata_port_operations *ops = ap->ops;
int pmp_tries, link_tries[SATA_PMP_MAX_PORTS];
struct ata_link *pmp_link = &ap->link;
struct ata_device *pmp_dev = pmp_link->device;
@@ -1029,9 +876,9 @@
retry:
/* PMP attached? */
- if (!ap->nr_pmp_links) {
- rc = ata_eh_recover(ap, prereset, softreset, hardreset,
- postreset, NULL);
+ if (!sata_pmp_attached(ap)) {
+ rc = ata_eh_recover(ap, ops->prereset, ops->softreset,
+ ops->hardreset, ops->postreset, NULL);
if (rc) {
ata_link_for_each_dev(dev, &ap->link)
ata_dev_disable(dev);
@@ -1049,8 +896,8 @@
}
/* recover pmp */
- rc = sata_pmp_eh_recover_pmp(ap, prereset, softreset, hardreset,
- postreset);
+ rc = sata_pmp_eh_recover_pmp(ap, ops->prereset, ops->softreset,
+ ops->hardreset, ops->postreset);
if (rc)
goto pmp_fail;
@@ -1060,8 +907,8 @@
goto pmp_fail;
/* recover links */
- rc = ata_eh_recover(ap, pmp_prereset, pmp_softreset, pmp_hardreset,
- pmp_postreset, &link);
+ rc = ata_eh_recover(ap, ops->pmp_prereset, ops->pmp_softreset,
+ ops->pmp_hardreset, ops->pmp_postreset, &link);
if (rc)
goto link_fail;
@@ -1124,7 +971,7 @@
link_fail:
if (sata_pmp_handle_link_fail(link, link_tries)) {
- pmp_ehc->i.action |= ATA_EH_HARDRESET;
+ pmp_ehc->i.action |= ATA_EH_RESET;
goto retry;
}
@@ -1136,13 +983,13 @@
if (ap->pflags & ATA_PFLAG_UNLOADING)
return rc;
- if (!ap->nr_pmp_links)
+ if (!sata_pmp_attached(ap))
goto retry;
if (--pmp_tries) {
ata_port_printk(ap, KERN_WARNING,
"failed to recover PMP, retrying in 5 secs\n");
- pmp_ehc->i.action |= ATA_EH_HARDRESET;
+ pmp_ehc->i.action |= ATA_EH_RESET;
ssleep(5);
goto retry;
}
@@ -1157,16 +1004,8 @@
}
/**
- * sata_pmp_do_eh - do standard error handling for PMP-enabled host
+ * sata_pmp_error_handler - do standard error handling for PMP-enabled host
* @ap: host port to handle error for
- * @prereset: prereset method (can be NULL)
- * @softreset: softreset method
- * @hardreset: hardreset method
- * @postreset: postreset method (can be NULL)
- * @pmp_prereset: PMP prereset method (can be NULL)
- * @pmp_softreset: PMP softreset method (can be NULL)
- * @pmp_hardreset: PMP hardreset method (can be NULL)
- * @pmp_postreset: PMP postreset method (can be NULL)
*
* Perform standard error handling sequence for PMP-enabled host
* @ap.
@@ -1174,16 +1013,14 @@
* LOCKING:
* Kernel thread context (may sleep).
*/
-void sata_pmp_do_eh(struct ata_port *ap,
- ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
- ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
- ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
- ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset)
+void sata_pmp_error_handler(struct ata_port *ap)
{
ata_eh_autopsy(ap);
ata_eh_report(ap);
- sata_pmp_eh_recover(ap, prereset, softreset, hardreset, postreset,
- pmp_prereset, pmp_softreset, pmp_hardreset,
- pmp_postreset);
+ sata_pmp_eh_recover(ap);
ata_eh_finish(ap);
}
+
+EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
+EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
+EXPORT_SYMBOL_GPL(sata_pmp_error_handler);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1579539..fedf62d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2393,7 +2393,9 @@
/* FIXME: is this needed? */
memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
- ap->ops->tf_read(ap, &qc->tf);
+#ifdef CONFIG_ATA_SFF
+ ap->ops->sff_tf_read(ap, &qc->tf);
+#endif
/* fill these in, for the case where they are -not- overwritten */
cmd->sense_buffer[0] = 0x70;
@@ -2615,7 +2617,7 @@
static struct ata_device *ata_find_dev(struct ata_port *ap, int devno)
{
- if (ap->nr_pmp_links == 0) {
+ if (!sata_pmp_attached(ap)) {
if (likely(devno < ata_link_max_devices(&ap->link)))
return &ap->link.device[devno];
} else {
@@ -2632,7 +2634,7 @@
int devno;
/* skip commands not addressed to targets we simulate */
- if (ap->nr_pmp_links == 0) {
+ if (!sata_pmp_attached(ap)) {
if (unlikely(scsidev->channel || scsidev->lun))
return NULL;
devno = scsidev->id;
@@ -3490,7 +3492,7 @@
if (lun != SCAN_WILD_CARD && lun)
return -EINVAL;
- if (ap->nr_pmp_links == 0) {
+ if (!sata_pmp_attached(ap)) {
if (channel != SCAN_WILD_CARD && channel)
return -EINVAL;
devno = id;
@@ -3507,8 +3509,8 @@
ata_port_for_each_link(link, ap) {
struct ata_eh_info *ehi = &link->eh_info;
- ehi->probe_mask |= (1 << ata_link_max_devices(link)) - 1;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->probe_mask |= ATA_ALL_DEVICES;
+ ehi->action |= ATA_EH_RESET;
}
} else {
struct ata_device *dev = ata_find_dev(ap, devno);
@@ -3516,8 +3518,7 @@
if (dev) {
struct ata_eh_info *ehi = &dev->link->eh_info;
ehi->probe_mask |= 1 << dev->devno;
- ehi->action |= ATA_EH_SOFTRESET;
- ehi->flags |= ATA_EHI_RESUME_LINK;
+ ehi->action |= ATA_EH_RESET;
} else
rc = -EINVAL;
}
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 20dc572..1549952 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -35,11 +35,377 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/libata.h>
+#include <linux/highmem.h>
#include "libata.h"
+const struct ata_port_operations ata_sff_port_ops = {
+ .inherits = &ata_base_port_ops,
+
+ .qc_prep = ata_sff_qc_prep,
+ .qc_issue = ata_sff_qc_issue,
+ .qc_fill_rtf = ata_sff_qc_fill_rtf,
+
+ .freeze = ata_sff_freeze,
+ .thaw = ata_sff_thaw,
+ .prereset = ata_sff_prereset,
+ .softreset = ata_sff_softreset,
+ .hardreset = sata_sff_hardreset,
+ .postreset = ata_sff_postreset,
+ .error_handler = ata_sff_error_handler,
+ .post_internal_cmd = ata_sff_post_internal_cmd,
+
+ .sff_dev_select = ata_sff_dev_select,
+ .sff_check_status = ata_sff_check_status,
+ .sff_tf_load = ata_sff_tf_load,
+ .sff_tf_read = ata_sff_tf_read,
+ .sff_exec_command = ata_sff_exec_command,
+ .sff_data_xfer = ata_sff_data_xfer,
+ .sff_irq_on = ata_sff_irq_on,
+ .sff_irq_clear = ata_sff_irq_clear,
+
+ .port_start = ata_sff_port_start,
+};
+
+const struct ata_port_operations ata_bmdma_port_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .mode_filter = ata_bmdma_mode_filter,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+};
+
/**
- * ata_irq_on - Enable interrupts on a port.
+ * ata_fill_sg - Fill PCI IDE PRD table
+ * @qc: Metadata associated with taskfile to be transferred
+ *
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_fill_sg(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scatterlist *sg;
+ unsigned int si, pi;
+
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ u32 addr, offset;
+ u32 sg_len, len;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ offset = addr & 0xffff;
+ len = sg_len;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ ap->prd[pi].addr = cpu_to_le32(addr);
+ ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
+
+ pi++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
+ * ata_fill_sg_dumb - Fill PCI IDE PRD table
+ * @qc: Metadata associated with taskfile to be transferred
+ *
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command. Perform the fill
+ * so that we avoid writing any length 64K records for
+ * controllers that don't follow the spec.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ */
+static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scatterlist *sg;
+ unsigned int si, pi;
+
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ u32 addr, offset;
+ u32 sg_len, len, blen;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ offset = addr & 0xffff;
+ len = sg_len;
+ if ((offset + sg_len) > 0x10000)
+ len = 0x10000 - offset;
+
+ blen = len & 0xffff;
+ ap->prd[pi].addr = cpu_to_le32(addr);
+ if (blen == 0) {
+ /* Some PATA chipsets like the CS5530 can't
+ cope with 0x0000 meaning 64K as the spec says */
+ ap->prd[pi].flags_len = cpu_to_le32(0x8000);
+ blen = 0x8000;
+ ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
+ }
+ ap->prd[pi].flags_len = cpu_to_le32(blen);
+ VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len);
+
+ pi++;
+ sg_len -= len;
+ addr += len;
+ }
+ }
+
+ ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
+}
+
+/**
+ * ata_sff_qc_prep - Prepare taskfile for submission
+ * @qc: Metadata associated with taskfile to be prepared
+ *
+ * Prepare ATA taskfile for submission.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_sff_qc_prep(struct ata_queued_cmd *qc)
+{
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ ata_fill_sg(qc);
+}
+
+/**
+ * ata_sff_dumb_qc_prep - Prepare taskfile for submission
+ * @qc: Metadata associated with taskfile to be prepared
+ *
+ * Prepare ATA taskfile for submission.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc)
+{
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ ata_fill_sg_dumb(qc);
+}
+
+/**
+ * ata_sff_check_status - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile status register for currently-selected device
+ * and return its value. This also clears pending interrupts
+ * from this device
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+u8 ata_sff_check_status(struct ata_port *ap)
+{
+ return ioread8(ap->ioaddr.status_addr);
+}
+
+/**
+ * ata_sff_altstatus - Read device alternate status reg
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile alternate status register for
+ * currently-selected device and return its value.
+ *
+ * Note: may NOT be used as the check_altstatus() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+u8 ata_sff_altstatus(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus)
+ return ap->ops->sff_check_altstatus(ap);
+
+ return ioread8(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ * ata_sff_busy_sleep - sleep until BSY clears, or timeout
+ * @ap: port containing status register to be polled
+ * @tmout_pat: impatience timeout
+ * @tmout: overall timeout
+ *
+ * Sleep until ATA Status register bit BSY clears,
+ * or a timeout occurs.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_sff_busy_sleep(struct ata_port *ap,
+ unsigned long tmout_pat, unsigned long tmout)
+{
+ unsigned long timer_start, timeout;
+ u8 status;
+
+ status = ata_sff_busy_wait(ap, ATA_BUSY, 300);
+ timer_start = jiffies;
+ timeout = timer_start + tmout_pat;
+ while (status != 0xff && (status & ATA_BUSY) &&
+ time_before(jiffies, timeout)) {
+ msleep(50);
+ status = ata_sff_busy_wait(ap, ATA_BUSY, 3);
+ }
+
+ if (status != 0xff && (status & ATA_BUSY))
+ ata_port_printk(ap, KERN_WARNING,
+ "port is slow to respond, please be patient "
+ "(Status 0x%x)\n", status);
+
+ timeout = timer_start + tmout;
+ while (status != 0xff && (status & ATA_BUSY) &&
+ time_before(jiffies, timeout)) {
+ msleep(50);
+ status = ap->ops->sff_check_status(ap);
+ }
+
+ if (status == 0xff)
+ return -ENODEV;
+
+ if (status & ATA_BUSY) {
+ ata_port_printk(ap, KERN_ERR, "port failed to respond "
+ "(%lu secs, Status 0x%x)\n",
+ tmout / HZ, status);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static int ata_sff_check_ready(struct ata_link *link)
+{
+ u8 status = link->ap->ops->sff_check_status(link->ap);
+
+ if (!(status & ATA_BUSY))
+ return 1;
+ if (status == 0xff)
+ return -ENODEV;
+ return 0;
+}
+
+/**
+ * ata_sff_wait_ready - sleep until BSY clears, or timeout
+ * @link: SFF link to wait ready status for
+ * @deadline: deadline jiffies for the operation
+ *
+ * Sleep until ATA Status register bit BSY clears, or timeout
+ * occurs.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline)
+{
+ return ata_wait_ready(link, deadline, ata_sff_check_ready);
+}
+
+/**
+ * ata_sff_dev_select - Select device 0/1 on ATA bus
+ * @ap: ATA channel to manipulate
+ * @device: ATA device (numbered from zero) to select
+ *
+ * Use the method defined in the ATA specification to
+ * make either device 0, or device 1, active on the
+ * ATA channel. Works with both PIO and MMIO.
+ *
+ * May be used as the dev_select() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * caller.
+ */
+void ata_sff_dev_select(struct ata_port *ap, unsigned int device)
+{
+ u8 tmp;
+
+ if (device == 0)
+ tmp = ATA_DEVICE_OBS;
+ else
+ tmp = ATA_DEVICE_OBS | ATA_DEV1;
+
+ iowrite8(tmp, ap->ioaddr.device_addr);
+ ata_sff_pause(ap); /* needed; also flushes, for mmio */
+}
+
+/**
+ * ata_dev_select - Select device 0/1 on ATA bus
+ * @ap: ATA channel to manipulate
+ * @device: ATA device (numbered from zero) to select
+ * @wait: non-zero to wait for Status register BSY bit to clear
+ * @can_sleep: non-zero if context allows sleeping
+ *
+ * Use the method defined in the ATA specification to
+ * make either device 0, or device 1, active on the
+ * ATA channel.
+ *
+ * This is a high-level version of ata_sff_dev_select(), which
+ * additionally provides the services of inserting the proper
+ * pauses and status polling, where needed.
+ *
+ * LOCKING:
+ * caller.
+ */
+void ata_dev_select(struct ata_port *ap, unsigned int device,
+ unsigned int wait, unsigned int can_sleep)
+{
+ if (ata_msg_probe(ap))
+ ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, "
+ "device %u, wait %u\n", device, wait);
+
+ if (wait)
+ ata_wait_idle(ap);
+
+ ap->ops->sff_dev_select(ap, device);
+
+ if (wait) {
+ if (can_sleep && ap->link.device[device].class == ATA_DEV_ATAPI)
+ msleep(150);
+ ata_wait_idle(ap);
+ }
+}
+
+/**
+ * ata_sff_irq_on - Enable interrupts on a port.
* @ap: Port on which interrupts are enabled.
*
* Enable interrupts on a legacy IDE device using MMIO or PIO,
@@ -48,7 +414,7 @@
* LOCKING:
* Inherited from caller.
*/
-u8 ata_irq_on(struct ata_port *ap)
+u8 ata_sff_irq_on(struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
u8 tmp;
@@ -60,13 +426,34 @@
iowrite8(ap->ctl, ioaddr->ctl_addr);
tmp = ata_wait_idle(ap);
- ap->ops->irq_clear(ap);
+ ap->ops->sff_irq_clear(ap);
return tmp;
}
/**
- * ata_tf_load - send taskfile registers to host controller
+ * ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clear interrupt and error flags in DMA status register.
+ *
+ * May be used as the irq_clear() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_sff_irq_clear(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+ if (!mmio)
+ return;
+
+ iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
+}
+
+/**
+ * ata_sff_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
@@ -75,8 +462,7 @@
* LOCKING:
* Inherited from caller.
*/
-
-void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
@@ -126,26 +512,7 @@
}
/**
- * ata_exec_command - issue ATA command to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues ATA command, with proper synchronization with interrupt
- * handler / other threads.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
-{
- DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
-
- iowrite8(tf->command, ap->ioaddr.command_addr);
- ata_pause(ap);
-}
-
-/**
- * ata_tf_read - input device's ATA taskfile shadow registers
+ * ata_sff_tf_read - input device's ATA taskfile shadow registers
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
@@ -157,11 +524,11 @@
* LOCKING:
* Inherited from caller.
*/
-void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
- tf->command = ata_check_status(ap);
+ tf->command = ata_sff_check_status(ap);
tf->feature = ioread8(ioaddr->error_addr);
tf->nsect = ioread8(ioaddr->nsect_addr);
tf->lbal = ioread8(ioaddr->lbal_addr);
@@ -185,40 +552,1578 @@
}
/**
- * ata_check_status - Read device status reg & clear interrupt
- * @ap: port where the device is
+ * ata_sff_exec_command - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
*
- * Reads ATA taskfile status register for currently-selected device
- * and return its value. This also clears pending interrupts
- * from this device
+ * Issues ATA command, with proper synchronization with interrupt
+ * handler / other threads.
*
* LOCKING:
- * Inherited from caller.
+ * spin_lock_irqsave(host lock)
*/
-u8 ata_check_status(struct ata_port *ap)
+void ata_sff_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
{
- return ioread8(ap->ioaddr.status_addr);
+ DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
+
+ iowrite8(tf->command, ap->ioaddr.command_addr);
+ ata_sff_pause(ap);
}
/**
- * ata_altstatus - Read device alternate status reg
- * @ap: port where the device is
+ * ata_tf_to_host - issue ATA taskfile to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
*
- * Reads ATA taskfile alternate status register for
- * currently-selected device and return its value.
+ * Issues ATA taskfile register set to ATA host controller,
+ * with proper synchronization with interrupt handler and
+ * other threads.
*
- * Note: may NOT be used as the check_altstatus() entry in
- * ata_port_operations.
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+static inline void ata_tf_to_host(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ ap->ops->sff_tf_load(ap, tf);
+ ap->ops->sff_exec_command(ap, tf);
+}
+
+/**
+ * ata_sff_data_xfer - Transfer data by PIO
+ * @dev: device to target
+ * @buf: data buffer
+ * @buflen: buffer length
+ * @rw: read/write
+ *
+ * Transfer data from/to the device data register by PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ * RETURNS:
+ * Bytes consumed.
+ */
+unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
+{
+ struct ata_port *ap = dev->link->ap;
+ void __iomem *data_addr = ap->ioaddr.data_addr;
+ unsigned int words = buflen >> 1;
+
+ /* Transfer multiple of 2 bytes */
+ if (rw == READ)
+ ioread16_rep(data_addr, buf, words);
+ else
+ iowrite16_rep(data_addr, buf, words);
+
+ /* Transfer trailing 1 byte, if any. */
+ if (unlikely(buflen & 0x01)) {
+ __le16 align_buf[1] = { 0 };
+ unsigned char *trailing_buf = buf + buflen - 1;
+
+ if (rw == READ) {
+ align_buf[0] = cpu_to_le16(ioread16(data_addr));
+ memcpy(trailing_buf, align_buf, 1);
+ } else {
+ memcpy(align_buf, trailing_buf, 1);
+ iowrite16(le16_to_cpu(align_buf[0]), data_addr);
+ }
+ words++;
+ }
+
+ return words << 1;
+}
+
+/**
+ * ata_sff_data_xfer_noirq - Transfer data by PIO
+ * @dev: device to target
+ * @buf: data buffer
+ * @buflen: buffer length
+ * @rw: read/write
+ *
+ * Transfer data from/to the device data register by PIO. Do the
+ * transfer with interrupts disabled.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ * RETURNS:
+ * Bytes consumed.
+ */
+unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
+ unsigned int buflen, int rw)
+{
+ unsigned long flags;
+ unsigned int consumed;
+
+ local_irq_save(flags);
+ consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+ local_irq_restore(flags);
+
+ return consumed;
+}
+
+/**
+ * ata_pio_sector - Transfer a sector of data.
+ * @qc: Command on going
+ *
+ * Transfer qc->sect_size bytes of data from/to the ATA device.
*
* LOCKING:
* Inherited from caller.
*/
-u8 ata_altstatus(struct ata_port *ap)
+static void ata_pio_sector(struct ata_queued_cmd *qc)
{
- if (ap->ops->check_altstatus)
- return ap->ops->check_altstatus(ap);
+ int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
+ struct ata_port *ap = qc->ap;
+ struct page *page;
+ unsigned int offset;
+ unsigned char *buf;
- return ioread8(ap->ioaddr.altstatus_addr);
+ if (qc->curbytes == qc->nbytes - qc->sect_size)
+ ap->hsm_task_state = HSM_ST_LAST;
+
+ page = sg_page(qc->cursg);
+ offset = qc->cursg->offset + qc->cursg_ofs;
+
+ /* get the current page and offset */
+ page = nth_page(page, (offset >> PAGE_SHIFT));
+ offset %= PAGE_SIZE;
+
+ DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
+
+ if (PageHighMem(page)) {
+ unsigned long flags;
+
+ /* FIXME: use a bounce buffer */
+ local_irq_save(flags);
+ buf = kmap_atomic(page, KM_IRQ0);
+
+ /* do the actual data transfer */
+ ap->ops->sff_data_xfer(qc->dev, buf + offset, qc->sect_size,
+ do_write);
+
+ kunmap_atomic(buf, KM_IRQ0);
+ local_irq_restore(flags);
+ } else {
+ buf = page_address(page);
+ ap->ops->sff_data_xfer(qc->dev, buf + offset, qc->sect_size,
+ do_write);
+ }
+
+ qc->curbytes += qc->sect_size;
+ qc->cursg_ofs += qc->sect_size;
+
+ if (qc->cursg_ofs == qc->cursg->length) {
+ qc->cursg = sg_next(qc->cursg);
+ qc->cursg_ofs = 0;
+ }
+}
+
+/**
+ * ata_pio_sectors - Transfer one or many sectors.
+ * @qc: Command on going
+ *
+ * Transfer one or many sectors of data from/to the
+ * ATA device for the DRQ request.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void ata_pio_sectors(struct ata_queued_cmd *qc)
+{
+ if (is_multi_taskfile(&qc->tf)) {
+ /* READ/WRITE MULTIPLE */
+ unsigned int nsect;
+
+ WARN_ON(qc->dev->multi_count == 0);
+
+ nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size,
+ qc->dev->multi_count);
+ while (nsect--)
+ ata_pio_sector(qc);
+ } else
+ ata_pio_sector(qc);
+
+ ata_sff_altstatus(qc->ap); /* flush */
+}
+
+/**
+ * atapi_send_cdb - Write CDB bytes to hardware
+ * @ap: Port to which ATAPI device is attached.
+ * @qc: Taskfile currently active
+ *
+ * When device has indicated its readiness to accept
+ * a CDB, this function is called. Send the CDB.
+ *
+ * LOCKING:
+ * caller.
+ */
+static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ /* send SCSI cdb */
+ DPRINTK("send cdb\n");
+ WARN_ON(qc->dev->cdb_len < 12);
+
+ ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
+ ata_sff_altstatus(ap); /* flush */
+
+ switch (qc->tf.protocol) {
+ case ATAPI_PROT_PIO:
+ ap->hsm_task_state = HSM_ST;
+ break;
+ case ATAPI_PROT_NODATA:
+ ap->hsm_task_state = HSM_ST_LAST;
+ break;
+ case ATAPI_PROT_DMA:
+ ap->hsm_task_state = HSM_ST_LAST;
+ /* initiate bmdma */
+ ap->ops->bmdma_start(qc);
+ break;
+ }
+}
+
+/**
+ * __atapi_pio_bytes - Transfer data from/to the ATAPI device.
+ * @qc: Command on going
+ * @bytes: number of bytes
+ *
+ * Transfer Transfer data from/to the ATAPI device.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ */
+static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes)
+{
+ int rw = (qc->tf.flags & ATA_TFLAG_WRITE) ? WRITE : READ;
+ struct ata_port *ap = qc->ap;
+ struct ata_device *dev = qc->dev;
+ struct ata_eh_info *ehi = &dev->link->eh_info;
+ struct scatterlist *sg;
+ struct page *page;
+ unsigned char *buf;
+ unsigned int offset, count, consumed;
+
+next_sg:
+ sg = qc->cursg;
+ if (unlikely(!sg)) {
+ ata_ehi_push_desc(ehi, "unexpected or too much trailing data "
+ "buf=%u cur=%u bytes=%u",
+ qc->nbytes, qc->curbytes, bytes);
+ return -1;
+ }
+
+ page = sg_page(sg);
+ offset = sg->offset + qc->cursg_ofs;
+
+ /* get the current page and offset */
+ page = nth_page(page, (offset >> PAGE_SHIFT));
+ offset %= PAGE_SIZE;
+
+ /* don't overrun current sg */
+ count = min(sg->length - qc->cursg_ofs, bytes);
+
+ /* don't cross page boundaries */
+ count = min(count, (unsigned int)PAGE_SIZE - offset);
+
+ DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read");
+
+ if (PageHighMem(page)) {
+ unsigned long flags;
+
+ /* FIXME: use bounce buffer */
+ local_irq_save(flags);
+ buf = kmap_atomic(page, KM_IRQ0);
+
+ /* do the actual data transfer */
+ consumed = ap->ops->sff_data_xfer(dev, buf + offset, count, rw);
+
+ kunmap_atomic(buf, KM_IRQ0);
+ local_irq_restore(flags);
+ } else {
+ buf = page_address(page);
+ consumed = ap->ops->sff_data_xfer(dev, buf + offset, count, rw);
+ }
+
+ bytes -= min(bytes, consumed);
+ qc->curbytes += count;
+ qc->cursg_ofs += count;
+
+ if (qc->cursg_ofs == sg->length) {
+ qc->cursg = sg_next(qc->cursg);
+ qc->cursg_ofs = 0;
+ }
+
+ /* consumed can be larger than count only for the last transfer */
+ WARN_ON(qc->cursg && count != consumed);
+
+ if (bytes)
+ goto next_sg;
+ return 0;
+}
+
+/**
+ * atapi_pio_bytes - Transfer data from/to the ATAPI device.
+ * @qc: Command on going
+ *
+ * Transfer Transfer data from/to the ATAPI device.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void atapi_pio_bytes(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *dev = qc->dev;
+ struct ata_eh_info *ehi = &dev->link->eh_info;
+ unsigned int ireason, bc_lo, bc_hi, bytes;
+ int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0;
+
+ /* Abuse qc->result_tf for temp storage of intermediate TF
+ * here to save some kernel stack usage.
+ * For normal completion, qc->result_tf is not relevant. For
+ * error, qc->result_tf is later overwritten by ata_qc_complete().
+ * So, the correctness of qc->result_tf is not affected.
+ */
+ ap->ops->sff_tf_read(ap, &qc->result_tf);
+ ireason = qc->result_tf.nsect;
+ bc_lo = qc->result_tf.lbam;
+ bc_hi = qc->result_tf.lbah;
+ bytes = (bc_hi << 8) | bc_lo;
+
+ /* shall be cleared to zero, indicating xfer of data */
+ if (unlikely(ireason & (1 << 0)))
+ goto atapi_check;
+
+ /* make sure transfer direction matches expected */
+ i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0;
+ if (unlikely(do_write != i_write))
+ goto atapi_check;
+
+ if (unlikely(!bytes))
+ goto atapi_check;
+
+ VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes);
+
+ if (unlikely(__atapi_pio_bytes(qc, bytes)))
+ goto err_out;
+ ata_sff_altstatus(ap); /* flush */
+
+ return;
+
+ atapi_check:
+ ata_ehi_push_desc(ehi, "ATAPI check failed (ireason=0x%x bytes=%u)",
+ ireason, bytes);
+ err_out:
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+}
+
+/**
+ * ata_hsm_ok_in_wq - Check if the qc can be handled in the workqueue.
+ * @ap: the target ata_port
+ * @qc: qc on going
+ *
+ * RETURNS:
+ * 1 if ok in workqueue, 0 otherwise.
+ */
+static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ return 1;
+
+ if (ap->hsm_task_state == HSM_ST_FIRST) {
+ if (qc->tf.protocol == ATA_PROT_PIO &&
+ (qc->tf.flags & ATA_TFLAG_WRITE))
+ return 1;
+
+ if (ata_is_atapi(qc->tf.protocol) &&
+ !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * ata_hsm_qc_complete - finish a qc running on standard HSM
+ * @qc: Command to complete
+ * @in_wq: 1 if called from workqueue, 0 otherwise
+ *
+ * Finish @qc which is running on standard HSM.
+ *
+ * LOCKING:
+ * If @in_wq is zero, spin_lock_irqsave(host lock).
+ * Otherwise, none on entry and grabs host lock.
+ */
+static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned long flags;
+
+ if (ap->ops->error_handler) {
+ if (in_wq) {
+ spin_lock_irqsave(ap->lock, flags);
+
+ /* EH might have kicked in while host lock is
+ * released.
+ */
+ qc = ata_qc_from_tag(ap, qc->tag);
+ if (qc) {
+ if (likely(!(qc->err_mask & AC_ERR_HSM))) {
+ ap->ops->sff_irq_on(ap);
+ ata_qc_complete(qc);
+ } else
+ ata_port_freeze(ap);
+ }
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ } else {
+ if (likely(!(qc->err_mask & AC_ERR_HSM)))
+ ata_qc_complete(qc);
+ else
+ ata_port_freeze(ap);
+ }
+ } else {
+ if (in_wq) {
+ spin_lock_irqsave(ap->lock, flags);
+ ap->ops->sff_irq_on(ap);
+ ata_qc_complete(qc);
+ spin_unlock_irqrestore(ap->lock, flags);
+ } else
+ ata_qc_complete(qc);
+ }
+}
+
+/**
+ * ata_sff_hsm_move - move the HSM to the next state.
+ * @ap: the target ata_port
+ * @qc: qc on going
+ * @status: current device status
+ * @in_wq: 1 if called from workqueue, 0 otherwise
+ *
+ * RETURNS:
+ * 1 when poll next status needed, 0 otherwise.
+ */
+int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u8 status, int in_wq)
+{
+ unsigned long flags = 0;
+ int poll_next;
+
+ WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0);
+
+ /* Make sure ata_sff_qc_issue() does not throw things
+ * like DMA polling into the workqueue. Notice that
+ * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING).
+ */
+ WARN_ON(in_wq != ata_hsm_ok_in_wq(ap, qc));
+
+fsm_start:
+ DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n",
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state, status);
+
+ switch (ap->hsm_task_state) {
+ case HSM_ST_FIRST:
+ /* Send first data block or PACKET CDB */
+
+ /* If polling, we will stay in the work queue after
+ * sending the data. Otherwise, interrupt handler
+ * takes over after sending the data.
+ */
+ poll_next = (qc->tf.flags & ATA_TFLAG_POLLING);
+
+ /* check device status */
+ if (unlikely((status & ATA_DRQ) == 0)) {
+ /* handle BSY=0, DRQ=0 as error */
+ if (likely(status & (ATA_ERR | ATA_DF)))
+ /* device stops HSM for abort/error */
+ qc->err_mask |= AC_ERR_DEV;
+ else
+ /* HSM violation. Let EH handle this */
+ qc->err_mask |= AC_ERR_HSM;
+
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ /* Device should not ask for data transfer (DRQ=1)
+ * when it finds something wrong.
+ * We ignore DRQ here and stop the HSM by
+ * changing hsm_task_state to HSM_ST_ERR and
+ * let the EH abort the command or reset the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ /* Some ATAPI tape drives forget to clear the ERR bit
+ * when doing the next command (mostly request sense).
+ * We ignore ERR here to workaround and proceed sending
+ * the CDB.
+ */
+ if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
+ ata_port_printk(ap, KERN_WARNING,
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X\n", status);
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+ }
+
+ /* Send the CDB (atapi) or the first data block (ata pio out).
+ * During the state transition, interrupt handler shouldn't
+ * be invoked before the data transfer is complete and
+ * hsm_task_state is changed. Hence, the following locking.
+ */
+ if (in_wq)
+ spin_lock_irqsave(ap->lock, flags);
+
+ if (qc->tf.protocol == ATA_PROT_PIO) {
+ /* PIO data out protocol.
+ * send first data block.
+ */
+
+ /* ata_pio_sectors() might change the state
+ * to HSM_ST_LAST. so, the state is changed here
+ * before ata_pio_sectors().
+ */
+ ap->hsm_task_state = HSM_ST;
+ ata_pio_sectors(qc);
+ } else
+ /* send CDB */
+ atapi_send_cdb(ap, qc);
+
+ if (in_wq)
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ /* if polling, ata_pio_task() handles the rest.
+ * otherwise, interrupt handler takes over from here.
+ */
+ break;
+
+ case HSM_ST:
+ /* complete command or read/write the data register */
+ if (qc->tf.protocol == ATAPI_PROT_PIO) {
+ /* ATAPI PIO protocol */
+ if ((status & ATA_DRQ) == 0) {
+ /* No more data to transfer or device error.
+ * Device error will be tagged in HSM_ST_LAST.
+ */
+ ap->hsm_task_state = HSM_ST_LAST;
+ goto fsm_start;
+ }
+
+ /* Device should not ask for data transfer (DRQ=1)
+ * when it finds something wrong.
+ * We ignore DRQ here and stop the HSM by
+ * changing hsm_task_state to HSM_ST_ERR and
+ * let the EH abort the command or reset the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
+ "device error, dev_stat 0x%X\n",
+ status);
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ atapi_pio_bytes(qc);
+
+ if (unlikely(ap->hsm_task_state == HSM_ST_ERR))
+ /* bad ireason reported by device */
+ goto fsm_start;
+
+ } else {
+ /* ATA PIO protocol */
+ if (unlikely((status & ATA_DRQ) == 0)) {
+ /* handle BSY=0, DRQ=0 as error */
+ if (likely(status & (ATA_ERR | ATA_DF)))
+ /* device stops HSM for abort/error */
+ qc->err_mask |= AC_ERR_DEV;
+ else
+ /* HSM violation. Let EH handle this.
+ * Phantom devices also trigger this
+ * condition. Mark hint.
+ */
+ qc->err_mask |= AC_ERR_HSM |
+ AC_ERR_NODEV_HINT;
+
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ /* For PIO reads, some devices may ask for
+ * data transfer (DRQ=1) alone with ERR=1.
+ * We respect DRQ here and transfer one
+ * block of junk data before changing the
+ * hsm_task_state to HSM_ST_ERR.
+ *
+ * For PIO writes, ERR=1 DRQ=1 doesn't make
+ * sense since the data block has been
+ * transferred to the device.
+ */
+ if (unlikely(status & (ATA_ERR | ATA_DF))) {
+ /* data might be corrputed */
+ qc->err_mask |= AC_ERR_DEV;
+
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ ata_pio_sectors(qc);
+ status = ata_wait_idle(ap);
+ }
+
+ if (status & (ATA_BUSY | ATA_DRQ))
+ qc->err_mask |= AC_ERR_HSM;
+
+ /* ata_pio_sectors() might change the
+ * state to HSM_ST_LAST. so, the state
+ * is changed after ata_pio_sectors().
+ */
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ ata_pio_sectors(qc);
+
+ if (ap->hsm_task_state == HSM_ST_LAST &&
+ (!(qc->tf.flags & ATA_TFLAG_WRITE))) {
+ /* all data read */
+ status = ata_wait_idle(ap);
+ goto fsm_start;
+ }
+ }
+
+ poll_next = 1;
+ break;
+
+ case HSM_ST_LAST:
+ if (unlikely(!ata_ok(status))) {
+ qc->err_mask |= __ac_err_mask(status);
+ ap->hsm_task_state = HSM_ST_ERR;
+ goto fsm_start;
+ }
+
+ /* no more data to transfer */
+ DPRINTK("ata%u: dev %u command complete, drv_stat 0x%x\n",
+ ap->print_id, qc->dev->devno, status);
+
+ WARN_ON(qc->err_mask);
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ /* complete taskfile transaction */
+ ata_hsm_qc_complete(qc, in_wq);
+
+ poll_next = 0;
+ break;
+
+ case HSM_ST_ERR:
+ /* make sure qc->err_mask is available to
+ * know what's wrong and recover
+ */
+ WARN_ON(qc->err_mask == 0);
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ /* complete taskfile transaction */
+ ata_hsm_qc_complete(qc, in_wq);
+
+ poll_next = 0;
+ break;
+ default:
+ poll_next = 0;
+ BUG();
+ }
+
+ return poll_next;
+}
+
+void ata_pio_task(struct work_struct *work)
+{
+ struct ata_port *ap =
+ container_of(work, struct ata_port, port_task.work);
+ struct ata_queued_cmd *qc = ap->port_task_data;
+ u8 status;
+ int poll_next;
+
+fsm_start:
+ WARN_ON(ap->hsm_task_state == HSM_ST_IDLE);
+
+ /*
+ * This is purely heuristic. This is a fast path.
+ * Sometimes when we enter, BSY will be cleared in
+ * a chk-status or two. If not, the drive is probably seeking
+ * or something. Snooze for a couple msecs, then
+ * chk-status again. If still busy, queue delayed work.
+ */
+ status = ata_sff_busy_wait(ap, ATA_BUSY, 5);
+ if (status & ATA_BUSY) {
+ msleep(2);
+ status = ata_sff_busy_wait(ap, ATA_BUSY, 10);
+ if (status & ATA_BUSY) {
+ ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
+ return;
+ }
+ }
+
+ /* move the HSM */
+ poll_next = ata_sff_hsm_move(ap, qc, status, 1);
+
+ /* another command or interrupt handler
+ * may be running at this point.
+ */
+ if (poll_next)
+ goto fsm_start;
+}
+
+/**
+ * ata_sff_qc_issue - issue taskfile to device in proto-dependent manner
+ * @qc: command to issue to device
+ *
+ * Using various libata functions and hooks, this function
+ * starts an ATA command. ATA commands are grouped into
+ * classes called "protocols", and issuing each type of protocol
+ * is slightly different.
+ *
+ * May be used as the qc_issue() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * Zero on success, AC_ERR_* mask on failure
+ */
+unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* Use polling pio if the LLD doesn't handle
+ * interrupt driven pio and atapi CDB interrupt.
+ */
+ if (ap->flags & ATA_FLAG_PIO_POLLING) {
+ switch (qc->tf.protocol) {
+ case ATA_PROT_PIO:
+ case ATA_PROT_NODATA:
+ case ATAPI_PROT_PIO:
+ case ATAPI_PROT_NODATA:
+ qc->tf.flags |= ATA_TFLAG_POLLING;
+ break;
+ case ATAPI_PROT_DMA:
+ if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
+ /* see ata_dma_blacklisted() */
+ BUG();
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* select the device */
+ ata_dev_select(ap, qc->dev->devno, 1, 0);
+
+ /* start the command */
+ switch (qc->tf.protocol) {
+ case ATA_PROT_NODATA:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_qc_set_polling(qc);
+
+ ata_tf_to_host(ap, &qc->tf);
+ ap->hsm_task_state = HSM_ST_LAST;
+
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_pio_queue_task(ap, qc, 0);
+
+ break;
+
+ case ATA_PROT_DMA:
+ WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
+ ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
+ ap->ops->bmdma_setup(qc); /* set up bmdma */
+ ap->ops->bmdma_start(qc); /* initiate bmdma */
+ ap->hsm_task_state = HSM_ST_LAST;
+ break;
+
+ case ATA_PROT_PIO:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_qc_set_polling(qc);
+
+ ata_tf_to_host(ap, &qc->tf);
+
+ if (qc->tf.flags & ATA_TFLAG_WRITE) {
+ /* PIO data out protocol */
+ ap->hsm_task_state = HSM_ST_FIRST;
+ ata_pio_queue_task(ap, qc, 0);
+
+ /* always send first data block using
+ * the ata_pio_task() codepath.
+ */
+ } else {
+ /* PIO data in protocol */
+ ap->hsm_task_state = HSM_ST;
+
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_pio_queue_task(ap, qc, 0);
+
+ /* if polling, ata_pio_task() handles the rest.
+ * otherwise, interrupt handler takes over from here.
+ */
+ }
+
+ break;
+
+ case ATAPI_PROT_PIO:
+ case ATAPI_PROT_NODATA:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ ata_qc_set_polling(qc);
+
+ ata_tf_to_host(ap, &qc->tf);
+
+ ap->hsm_task_state = HSM_ST_FIRST;
+
+ /* send cdb by polling if no cdb interrupt */
+ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
+ (qc->tf.flags & ATA_TFLAG_POLLING))
+ ata_pio_queue_task(ap, qc, 0);
+ break;
+
+ case ATAPI_PROT_DMA:
+ WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING);
+
+ ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
+ ap->ops->bmdma_setup(qc); /* set up bmdma */
+ ap->hsm_task_state = HSM_ST_FIRST;
+
+ /* send cdb by polling if no cdb interrupt */
+ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ ata_pio_queue_task(ap, qc, 0);
+ break;
+
+ default:
+ WARN_ON(1);
+ return AC_ERR_SYSTEM;
+ }
+
+ return 0;
+}
+
+/**
+ * ata_sff_qc_fill_rtf - fill result TF using ->sff_tf_read
+ * @qc: qc to fill result TF for
+ *
+ * @qc is finished and result TF needs to be filled. Fill it
+ * using ->sff_tf_read.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * true indicating that result TF is successfully filled.
+ */
+bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ qc->ap->ops->sff_tf_read(qc->ap, &qc->result_tf);
+ return true;
+}
+
+/**
+ * ata_sff_host_intr - Handle host interrupt for given (port, task)
+ * @ap: Port on which interrupt arrived (possibly...)
+ * @qc: Taskfile currently active in engine
+ *
+ * Handle host interrupt for given queued command. Currently,
+ * only DMA interrupts are handled. All other commands are
+ * handled via polling with interrupts disabled (nIEN bit).
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ *
+ * RETURNS:
+ * One if interrupt was handled, zero if not (shared irq).
+ */
+inline unsigned int ata_sff_host_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc)
+{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
+ u8 status, host_stat = 0;
+
+ VPRINTK("ata%u: protocol %d task_state %d\n",
+ ap->print_id, qc->tf.protocol, ap->hsm_task_state);
+
+ /* Check whether we are expecting interrupt in this state */
+ switch (ap->hsm_task_state) {
+ case HSM_ST_FIRST:
+ /* Some pre-ATAPI-4 devices assert INTRQ
+ * at this state when ready to receive CDB.
+ */
+
+ /* Check the ATA_DFLAG_CDB_INTR flag is enough here.
+ * The flag was turned on only for atapi devices. No
+ * need to check ata_is_atapi(qc->tf.protocol) again.
+ */
+ if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+ goto idle_irq;
+ break;
+ case HSM_ST_LAST:
+ if (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATAPI_PROT_DMA) {
+ /* check status of DMA engine */
+ host_stat = ap->ops->bmdma_status(ap);
+ VPRINTK("ata%u: host_stat 0x%X\n",
+ ap->print_id, host_stat);
+
+ /* if it's not our irq... */
+ if (!(host_stat & ATA_DMA_INTR))
+ goto idle_irq;
+
+ /* before we do anything else, clear DMA-Start bit */
+ ap->ops->bmdma_stop(qc);
+
+ if (unlikely(host_stat & ATA_DMA_ERR)) {
+ /* error when transfering data to/from memory */
+ qc->err_mask |= AC_ERR_HOST_BUS;
+ ap->hsm_task_state = HSM_ST_ERR;
+ }
+ }
+ break;
+ case HSM_ST:
+ break;
+ default:
+ goto idle_irq;
+ }
+
+ /* check altstatus */
+ status = ata_sff_altstatus(ap);
+ if (status & ATA_BUSY)
+ goto idle_irq;
+
+ /* check main status, clearing INTRQ */
+ status = ap->ops->sff_check_status(ap);
+ if (unlikely(status & ATA_BUSY))
+ goto idle_irq;
+
+ /* ack bmdma irq events */
+ ap->ops->sff_irq_clear(ap);
+
+ ata_sff_hsm_move(ap, qc, status, 0);
+
+ if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATAPI_PROT_DMA))
+ ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+
+ return 1; /* irq handled */
+
+idle_irq:
+ ap->stats.idle_irq++;
+
+#ifdef ATA_IRQ_TRAP
+ if ((ap->stats.idle_irq % 1000) == 0) {
+ ap->ops->sff_check_status(ap);
+ ap->ops->sff_irq_clear(ap);
+ ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+ return 1;
+ }
+#endif
+ return 0; /* irq not handled */
+}
+
+/**
+ * ata_sff_interrupt - Default ATA host interrupt handler
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host information structure
+ *
+ * Default interrupt handler for PCI IDE devices. Calls
+ * ata_sff_host_intr() for each port that is not disabled.
+ *
+ * LOCKING:
+ * Obtains host lock during operation.
+ *
+ * RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ unsigned int i;
+ unsigned int handled = 0;
+ unsigned long flags;
+
+ /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
+ spin_lock_irqsave(&host->lock, flags);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap;
+
+ ap = host->ports[i];
+ if (ap &&
+ !(ap->flags & ATA_FLAG_DISABLED)) {
+ struct ata_queued_cmd *qc;
+
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) &&
+ (qc->flags & ATA_QCFLAG_ACTIVE))
+ handled |= ata_sff_host_intr(ap, qc);
+ }
+ }
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return IRQ_RETVAL(handled);
+}
+
+/**
+ * ata_sff_freeze - Freeze SFF controller port
+ * @ap: port to freeze
+ *
+ * Freeze BMDMA controller port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+void ata_sff_freeze(struct ata_port *ap)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ ap->ctl |= ATA_NIEN;
+ ap->last_ctl = ap->ctl;
+
+ if (ioaddr->ctl_addr)
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
+
+ /* Under certain circumstances, some controllers raise IRQ on
+ * ATA_NIEN manipulation. Also, many controllers fail to mask
+ * previously pending IRQ on ATA_NIEN assertion. Clear it.
+ */
+ ap->ops->sff_check_status(ap);
+
+ ap->ops->sff_irq_clear(ap);
+}
+
+/**
+ * ata_sff_thaw - Thaw SFF controller port
+ * @ap: port to thaw
+ *
+ * Thaw SFF controller port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+void ata_sff_thaw(struct ata_port *ap)
+{
+ /* clear & re-enable interrupts */
+ ap->ops->sff_check_status(ap);
+ ap->ops->sff_irq_clear(ap);
+ ap->ops->sff_irq_on(ap);
+}
+
+/**
+ * ata_sff_prereset - prepare SFF link for reset
+ * @link: SFF link to be reset
+ * @deadline: deadline jiffies for the operation
+ *
+ * SFF link @link is about to be reset. Initialize it. It first
+ * calls ata_std_prereset() and wait for !BSY if the port is
+ * being softreset.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_sff_prereset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_eh_context *ehc = &link->eh_context;
+ int rc;
+
+ rc = ata_std_prereset(link, deadline);
+ if (rc)
+ return rc;
+
+ /* if we're about to do hardreset, nothing more to do */
+ if (ehc->i.action & ATA_EH_HARDRESET)
+ return 0;
+
+ /* wait for !BSY if we don't know that no device is attached */
+ if (!ata_link_offline(link)) {
+ rc = ata_sff_wait_ready(link, deadline);
+ if (rc && rc != -ENODEV) {
+ ata_link_printk(link, KERN_WARNING, "device not ready "
+ "(errno=%d), forcing hardreset\n", rc);
+ ehc->i.action |= ATA_EH_HARDRESET;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ata_devchk - PATA device presence detection
+ * @ap: ATA channel to examine
+ * @device: Device to examine (starting at zero)
+ *
+ * This technique was originally described in
+ * Hale Landis's ATADRVR (www.ata-atapi.com), and
+ * later found its way into the ATA/ATAPI spec.
+ *
+ * Write a pattern to the ATA shadow registers,
+ * and if a device is present, it will respond by
+ * correctly storing and echoing back the
+ * ATA shadow register contents.
+ *
+ * LOCKING:
+ * caller.
+ */
+static unsigned int ata_devchk(struct ata_port *ap, unsigned int device)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ u8 nsect, lbal;
+
+ ap->ops->sff_dev_select(ap, device);
+
+ iowrite8(0x55, ioaddr->nsect_addr);
+ iowrite8(0xaa, ioaddr->lbal_addr);
+
+ iowrite8(0xaa, ioaddr->nsect_addr);
+ iowrite8(0x55, ioaddr->lbal_addr);
+
+ iowrite8(0x55, ioaddr->nsect_addr);
+ iowrite8(0xaa, ioaddr->lbal_addr);
+
+ nsect = ioread8(ioaddr->nsect_addr);
+ lbal = ioread8(ioaddr->lbal_addr);
+
+ if ((nsect == 0x55) && (lbal == 0xaa))
+ return 1; /* we found a device */
+
+ return 0; /* nothing found */
+}
+
+/**
+ * ata_sff_dev_classify - Parse returned ATA device signature
+ * @dev: ATA device to classify (starting at zero)
+ * @present: device seems present
+ * @r_err: Value of error register on completion
+ *
+ * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs,
+ * an ATA/ATAPI-defined set of values is placed in the ATA
+ * shadow registers, indicating the results of device detection
+ * and diagnostics.
+ *
+ * Select the ATA device, and read the values from the ATA shadow
+ * registers. Then parse according to the Error register value,
+ * and the spec-defined values examined by ata_dev_classify().
+ *
+ * LOCKING:
+ * caller.
+ *
+ * RETURNS:
+ * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
+ */
+unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
+ u8 *r_err)
+{
+ struct ata_port *ap = dev->link->ap;
+ struct ata_taskfile tf;
+ unsigned int class;
+ u8 err;
+
+ ap->ops->sff_dev_select(ap, dev->devno);
+
+ memset(&tf, 0, sizeof(tf));
+
+ ap->ops->sff_tf_read(ap, &tf);
+ err = tf.feature;
+ if (r_err)
+ *r_err = err;
+
+ /* see if device passed diags: continue and warn later */
+ if (err == 0)
+ /* diagnostic fail : do nothing _YET_ */
+ dev->horkage |= ATA_HORKAGE_DIAGNOSTIC;
+ else if (err == 1)
+ /* do nothing */ ;
+ else if ((dev->devno == 0) && (err == 0x81))
+ /* do nothing */ ;
+ else
+ return ATA_DEV_NONE;
+
+ /* determine if device is ATA or ATAPI */
+ class = ata_dev_classify(&tf);
+
+ if (class == ATA_DEV_UNKNOWN) {
+ /* If the device failed diagnostic, it's likely to
+ * have reported incorrect device signature too.
+ * Assume ATA device if the device seems present but
+ * device signature is invalid with diagnostic
+ * failure.
+ */
+ if (present && (dev->horkage & ATA_HORKAGE_DIAGNOSTIC))
+ class = ATA_DEV_ATA;
+ else
+ class = ATA_DEV_NONE;
+ } else if ((class == ATA_DEV_ATA) &&
+ (ap->ops->sff_check_status(ap) == 0))
+ class = ATA_DEV_NONE;
+
+ return class;
+}
+
+/**
+ * ata_sff_wait_after_reset - wait for devices to become ready after reset
+ * @link: SFF link which is just reset
+ * @devmask: mask of present devices
+ * @deadline: deadline jiffies for the operation
+ *
+ * Wait devices attached to SFF @link to become ready after
+ * reset. It contains preceding 150ms wait to avoid accessing TF
+ * status register too early.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -ENODEV if some or all of devices in @devmask
+ * don't seem to exist. -errno on other errors.
+ */
+int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int dev0 = devmask & (1 << 0);
+ unsigned int dev1 = devmask & (1 << 1);
+ int rc, ret = 0;
+
+ msleep(ATA_WAIT_AFTER_RESET_MSECS);
+
+ /* always check readiness of the master device */
+ rc = ata_sff_wait_ready(link, deadline);
+ /* -ENODEV means the odd clown forgot the D7 pulldown resistor
+ * and TF status is 0xff, bail out on it too.
+ */
+ if (rc)
+ return rc;
+
+ /* if device 1 was found in ata_devchk, wait for register
+ * access briefly, then wait for BSY to clear.
+ */
+ if (dev1) {
+ int i;
+
+ ap->ops->sff_dev_select(ap, 1);
+
+ /* Wait for register access. Some ATAPI devices fail
+ * to set nsect/lbal after reset, so don't waste too
+ * much time on it. We're gonna wait for !BSY anyway.
+ */
+ for (i = 0; i < 2; i++) {
+ u8 nsect, lbal;
+
+ nsect = ioread8(ioaddr->nsect_addr);
+ lbal = ioread8(ioaddr->lbal_addr);
+ if ((nsect == 1) && (lbal == 1))
+ break;
+ msleep(50); /* give drive a breather */
+ }
+
+ rc = ata_sff_wait_ready(link, deadline);
+ if (rc) {
+ if (rc != -ENODEV)
+ return rc;
+ ret = rc;
+ }
+ }
+
+ /* is all this really necessary? */
+ ap->ops->sff_dev_select(ap, 0);
+ if (dev1)
+ ap->ops->sff_dev_select(ap, 1);
+ if (dev0)
+ ap->ops->sff_dev_select(ap, 0);
+
+ return ret;
+}
+
+static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
+ unsigned long deadline)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ DPRINTK("ata%u: bus reset via SRST\n", ap->print_id);
+
+ /* software reset. causes dev0 to be selected */
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
+ udelay(20); /* FIXME: flush */
+ iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
+ udelay(20); /* FIXME: flush */
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
+
+ /* wait the port to become ready */
+ return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
+}
+
+/**
+ * ata_sff_softreset - reset host port via ATA SRST
+ * @link: ATA link to reset
+ * @classes: resulting classes of attached devices
+ * @deadline: deadline jiffies for the operation
+ *
+ * Reset host port using ATA SRST.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+ unsigned int devmask = 0;
+ int rc;
+ u8 err;
+
+ DPRINTK("ENTER\n");
+
+ /* determine if device 0/1 are present */
+ if (ata_devchk(ap, 0))
+ devmask |= (1 << 0);
+ if (slave_possible && ata_devchk(ap, 1))
+ devmask |= (1 << 1);
+
+ /* select device 0 again */
+ ap->ops->sff_dev_select(ap, 0);
+
+ /* issue bus reset */
+ DPRINTK("about to softreset, devmask=%x\n", devmask);
+ rc = ata_bus_softreset(ap, devmask, deadline);
+ /* if link is occupied, -ENODEV too is an error */
+ if (rc && (rc != -ENODEV || sata_scr_valid(link))) {
+ ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+ return rc;
+ }
+
+ /* determine by signature whether we have ATA or ATAPI devices */
+ classes[0] = ata_sff_dev_classify(&link->device[0],
+ devmask & (1 << 0), &err);
+ if (slave_possible && err != 0x81)
+ classes[1] = ata_sff_dev_classify(&link->device[1],
+ devmask & (1 << 1), &err);
+
+ DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+ return 0;
+}
+
+/**
+ * sata_sff_hardreset - reset host port via SATA phy reset
+ * @link: link to reset
+ * @class: resulting class of attached device
+ * @deadline: deadline jiffies for the operation
+ *
+ * SATA phy-reset host port using DET bits of SControl register,
+ * wait for !BSY and classify the attached device.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_eh_context *ehc = &link->eh_context;
+ const unsigned long *timing = sata_ehc_deb_timing(ehc);
+ bool online;
+ int rc;
+
+ rc = sata_link_hardreset(link, timing, deadline, &online,
+ ata_sff_check_ready);
+ if (online)
+ *class = ata_sff_dev_classify(link->device, 1, NULL);
+
+ DPRINTK("EXIT, class=%u\n", *class);
+ return rc;
+}
+
+/**
+ * ata_sff_postreset - SFF postreset callback
+ * @link: the target SFF ata_link
+ * @classes: classes of attached devices
+ *
+ * This function is invoked after a successful reset. It first
+ * calls ata_std_postreset() and performs SFF specific postreset
+ * processing.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
+{
+ struct ata_port *ap = link->ap;
+
+ ata_std_postreset(link, classes);
+
+ /* is double-select really necessary? */
+ if (classes[0] != ATA_DEV_NONE)
+ ap->ops->sff_dev_select(ap, 1);
+ if (classes[1] != ATA_DEV_NONE)
+ ap->ops->sff_dev_select(ap, 0);
+
+ /* bail out if no device is present */
+ if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+ DPRINTK("EXIT, no device\n");
+ return;
+ }
+
+ /* set up device control */
+ if (ap->ioaddr.ctl_addr)
+ iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+}
+
+/**
+ * ata_sff_error_handler - Stock error handler for BMDMA controller
+ * @ap: port to handle error for
+ *
+ * Stock error handler for SFF controller. It can handle both
+ * PATA and SATA controllers. Many controllers should be able to
+ * use this EH as-is or with some added handling before and
+ * after.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_sff_error_handler(struct ata_port *ap)
+{
+ ata_reset_fn_t softreset = ap->ops->softreset;
+ ata_reset_fn_t hardreset = ap->ops->hardreset;
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int thaw = 0;
+
+ qc = __ata_qc_from_tag(ap, ap->link.active_tag);
+ if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
+ qc = NULL;
+
+ /* reset PIO HSM and stop DMA engine */
+ spin_lock_irqsave(ap->lock, flags);
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ if (ap->ioaddr.bmdma_addr &&
+ qc && (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATAPI_PROT_DMA)) {
+ u8 host_stat;
+
+ host_stat = ap->ops->bmdma_status(ap);
+
+ /* BMDMA controllers indicate host bus error by
+ * setting DMA_ERR bit and timing out. As it wasn't
+ * really a timeout event, adjust error mask and
+ * cancel frozen state.
+ */
+ if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) {
+ qc->err_mask = AC_ERR_HOST_BUS;
+ thaw = 1;
+ }
+
+ ap->ops->bmdma_stop(qc);
+ }
+
+ ata_sff_altstatus(ap);
+ ap->ops->sff_check_status(ap);
+ ap->ops->sff_irq_clear(ap);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ if (thaw)
+ ata_eh_thaw_port(ap);
+
+ /* PIO and DMA engines have been stopped, perform recovery */
+
+ /* Ignore ata_sff_softreset if ctl isn't accessible and
+ * built-in hardresets if SCR access isn't available.
+ */
+ if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr)
+ softreset = NULL;
+ if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link))
+ hardreset = NULL;
+
+ ata_do_eh(ap, ap->ops->prereset, softreset, hardreset,
+ ap->ops->postreset);
+}
+
+/**
+ * ata_sff_post_internal_cmd - Stock post_internal_cmd for SFF controller
+ * @qc: internal command to clean up
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ if (qc->ap->ioaddr.bmdma_addr)
+ ata_bmdma_stop(qc);
+}
+
+/**
+ * ata_sff_port_start - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table if the device
+ * is DMA capable SFF.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_sff_port_start(struct ata_port *ap)
+{
+ if (ap->ioaddr.bmdma_addr)
+ return ata_port_start(ap);
+ return 0;
+}
+
+/**
+ * ata_sff_std_ports - initialize ioaddr with standard port offsets.
+ * @ioaddr: IO address structure to be initialized
+ *
+ * Utility function which initializes data_addr, error_addr,
+ * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
+ * device_addr, status_addr, and command_addr to standard offsets
+ * relative to cmd_addr.
+ *
+ * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
+ */
+void ata_sff_std_ports(struct ata_ioports *ioaddr)
+{
+ ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
+ ioaddr->error_addr = ioaddr->cmd_addr + ATA_REG_ERR;
+ ioaddr->feature_addr = ioaddr->cmd_addr + ATA_REG_FEATURE;
+ ioaddr->nsect_addr = ioaddr->cmd_addr + ATA_REG_NSECT;
+ ioaddr->lbal_addr = ioaddr->cmd_addr + ATA_REG_LBAL;
+ ioaddr->lbam_addr = ioaddr->cmd_addr + ATA_REG_LBAM;
+ ioaddr->lbah_addr = ioaddr->cmd_addr + ATA_REG_LBAH;
+ ioaddr->device_addr = ioaddr->cmd_addr + ATA_REG_DEVICE;
+ ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
+ ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
+}
+
+unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
+ unsigned long xfer_mask)
+{
+ /* Filter out DMA modes if the device has been configured by
+ the BIOS as PIO only */
+
+ if (adev->link->ap->ioaddr.bmdma_addr == NULL)
+ xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ return xfer_mask;
}
/**
@@ -246,7 +2151,7 @@
iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
/* issue r/w command */
- ap->ops->exec_command(ap, &qc->tf);
+ ap->ops->sff_exec_command(ap, &qc->tf);
}
/**
@@ -282,43 +2187,6 @@
}
/**
- * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
- * @ap: Port associated with this ATA transaction.
- *
- * Clear interrupt and error flags in DMA status register.
- *
- * May be used as the irq_clear() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-void ata_bmdma_irq_clear(struct ata_port *ap)
-{
- void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- if (!mmio)
- return;
-
- iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
-}
-
-/**
- * ata_bmdma_status - Read PCI IDE BMDMA status
- * @ap: Port associated with this ATA transaction.
- *
- * Read and return BMDMA status register.
- *
- * May be used as the bmdma_status() entry in ata_port_operations.
- *
- * LOCKING:
- * spin_lock_irqsave(host lock)
- */
-u8 ata_bmdma_status(struct ata_port *ap)
-{
- return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
-}
-
-/**
* ata_bmdma_stop - Stop PCI IDE BMDMA transfer
* @qc: Command we are ending DMA for
*
@@ -339,197 +2207,145 @@
mmio + ATA_DMA_CMD);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_altstatus(ap); /* dummy read */
+ ata_sff_altstatus(ap); /* dummy read */
}
/**
- * ata_bmdma_freeze - Freeze BMDMA controller port
- * @ap: port to freeze
+ * ata_bmdma_status - Read PCI IDE BMDMA status
+ * @ap: Port associated with this ATA transaction.
*
- * Freeze BMDMA controller port.
+ * Read and return BMDMA status register.
+ *
+ * May be used as the bmdma_status() entry in ata_port_operations.
*
* LOCKING:
- * Inherited from caller.
+ * spin_lock_irqsave(host lock)
*/
-void ata_bmdma_freeze(struct ata_port *ap)
+u8 ata_bmdma_status(struct ata_port *ap)
{
+ return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+}
+
+/**
+ * ata_bus_reset - reset host port and associated ATA channel
+ * @ap: port to reset
+ *
+ * This is typically the first time we actually start issuing
+ * commands to the ATA channel. We wait for BSY to clear, then
+ * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its
+ * result. Determine what devices, if any, are on the channel
+ * by looking at the device 0/1 error register. Look at the signature
+ * stored in each device's taskfile registers, to determine if
+ * the device is ATA or ATAPI.
+ *
+ * LOCKING:
+ * PCI/etc. bus probe sem.
+ * Obtains host lock.
+ *
+ * SIDE EFFECTS:
+ * Sets ATA_FLAG_DISABLED if bus reset fails.
+ *
+ * DEPRECATED:
+ * This function is only for drivers which still use old EH and
+ * will be removed soon.
+ */
+void ata_bus_reset(struct ata_port *ap)
+{
+ struct ata_device *device = ap->link.device;
struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+ u8 err;
+ unsigned int dev0, dev1 = 0, devmask = 0;
+ int rc;
- ap->ctl |= ATA_NIEN;
- ap->last_ctl = ap->ctl;
+ DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no);
- if (ioaddr->ctl_addr)
- iowrite8(ap->ctl, ioaddr->ctl_addr);
-
- /* Under certain circumstances, some controllers raise IRQ on
- * ATA_NIEN manipulation. Also, many controllers fail to mask
- * previously pending IRQ on ATA_NIEN assertion. Clear it.
- */
- ata_chk_status(ap);
-
- ap->ops->irq_clear(ap);
-}
-
-/**
- * ata_bmdma_thaw - Thaw BMDMA controller port
- * @ap: port to thaw
- *
- * Thaw BMDMA controller port.
- *
- * LOCKING:
- * Inherited from caller.
- */
-void ata_bmdma_thaw(struct ata_port *ap)
-{
- /* clear & re-enable interrupts */
- ata_chk_status(ap);
- ap->ops->irq_clear(ap);
- ap->ops->irq_on(ap);
-}
-
-/**
- * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller
- * @ap: port to handle error for
- * @prereset: prereset method (can be NULL)
- * @softreset: softreset method (can be NULL)
- * @hardreset: hardreset method (can be NULL)
- * @postreset: postreset method (can be NULL)
- *
- * Handle error for ATA BMDMA controller. It can handle both
- * PATA and SATA controllers. Many controllers should be able to
- * use this EH as-is or with some added handling before and
- * after.
- *
- * This function is intended to be used for constructing
- * ->error_handler callback by low level drivers.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
- ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
- ata_postreset_fn_t postreset)
-{
- struct ata_queued_cmd *qc;
- unsigned long flags;
- int thaw = 0;
-
- qc = __ata_qc_from_tag(ap, ap->link.active_tag);
- if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
- qc = NULL;
-
- /* reset PIO HSM and stop DMA engine */
- spin_lock_irqsave(ap->lock, flags);
-
- ap->hsm_task_state = HSM_ST_IDLE;
-
- if (qc && (qc->tf.protocol == ATA_PROT_DMA ||
- qc->tf.protocol == ATAPI_PROT_DMA)) {
- u8 host_stat;
-
- host_stat = ap->ops->bmdma_status(ap);
-
- /* BMDMA controllers indicate host bus error by
- * setting DMA_ERR bit and timing out. As it wasn't
- * really a timeout event, adjust error mask and
- * cancel frozen state.
- */
- if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) {
- qc->err_mask = AC_ERR_HOST_BUS;
- thaw = 1;
- }
-
- ap->ops->bmdma_stop(qc);
+ /* determine if device 0/1 are present */
+ if (ap->flags & ATA_FLAG_SATA_RESET)
+ dev0 = 1;
+ else {
+ dev0 = ata_devchk(ap, 0);
+ if (slave_possible)
+ dev1 = ata_devchk(ap, 1);
}
- ata_altstatus(ap);
- ata_chk_status(ap);
- ap->ops->irq_clear(ap);
+ if (dev0)
+ devmask |= (1 << 0);
+ if (dev1)
+ devmask |= (1 << 1);
- spin_unlock_irqrestore(ap->lock, flags);
+ /* select device 0 again */
+ ap->ops->sff_dev_select(ap, 0);
- if (thaw)
- ata_eh_thaw_port(ap);
+ /* issue bus reset */
+ if (ap->flags & ATA_FLAG_SRST) {
+ rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ);
+ if (rc && rc != -ENODEV)
+ goto err_out;
+ }
- /* PIO and DMA engines have been stopped, perform recovery */
- ata_do_eh(ap, prereset, softreset, hardreset, postreset);
-}
+ /*
+ * determine by signature whether we have ATA or ATAPI devices
+ */
+ device[0].class = ata_sff_dev_classify(&device[0], dev0, &err);
+ if ((slave_possible) && (err != 0x81))
+ device[1].class = ata_sff_dev_classify(&device[1], dev1, &err);
-/**
- * ata_bmdma_error_handler - Stock error handler for BMDMA controller
- * @ap: port to handle error for
- *
- * Stock error handler for BMDMA controller.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-void ata_bmdma_error_handler(struct ata_port *ap)
-{
- ata_reset_fn_t softreset = NULL, hardreset = NULL;
+ /* is double-select really necessary? */
+ if (device[1].class != ATA_DEV_NONE)
+ ap->ops->sff_dev_select(ap, 1);
+ if (device[0].class != ATA_DEV_NONE)
+ ap->ops->sff_dev_select(ap, 0);
- if (ap->ioaddr.ctl_addr)
- softreset = ata_std_softreset;
- if (sata_scr_valid(&ap->link))
- hardreset = sata_std_hardreset;
+ /* if no devices were detected, disable this port */
+ if ((device[0].class == ATA_DEV_NONE) &&
+ (device[1].class == ATA_DEV_NONE))
+ goto err_out;
- ata_bmdma_drive_eh(ap, ata_std_prereset, softreset, hardreset,
- ata_std_postreset);
-}
+ if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
+ /* set up device control for ATA_FLAG_SATA_RESET */
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
+ }
-/**
- * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for
- * BMDMA controller
- * @qc: internal command to clean up
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
-{
- if (qc->ap->ioaddr.bmdma_addr)
- ata_bmdma_stop(qc);
-}
+ DPRINTK("EXIT\n");
+ return;
-/**
- * ata_sff_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table if the device
- * is DMA capable SFF.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
+err_out:
+ ata_port_printk(ap, KERN_ERR, "disabling port\n");
+ ata_port_disable(ap);
-int ata_sff_port_start(struct ata_port *ap)
-{
- if (ap->ioaddr.bmdma_addr)
- return ata_port_start(ap);
- return 0;
+ DPRINTK("EXIT\n");
}
#ifdef CONFIG_PCI
-static int ata_resources_present(struct pci_dev *pdev, int port)
+/**
+ * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex
+ * @pdev: PCI device
+ *
+ * Some PCI ATA devices report simplex mode but in fact can be told to
+ * enter non simplex mode. This implements the necessary logic to
+ * perform the task on such devices. Calling it on other devices will
+ * have -undefined- behaviour.
+ */
+int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
{
- int i;
+ unsigned long bmdma = pci_resource_start(pdev, 4);
+ u8 simplex;
- /* Check the PCI resources for this channel are enabled */
- port = port * 2;
- for (i = 0; i < 2; i ++) {
- if (pci_resource_start(pdev, port + i) == 0 ||
- pci_resource_len(pdev, port + i) == 0)
- return 0;
- }
- return 1;
+ if (bmdma == 0)
+ return -ENOENT;
+
+ simplex = inb(bmdma + 0x02);
+ outb(simplex & 0x60, bmdma + 0x02);
+ simplex = inb(bmdma + 0x02);
+ if (simplex & 0x80)
+ return -EOPNOTSUPP;
+ return 0;
}
/**
- * ata_pci_init_bmdma - acquire PCI BMDMA resources and init ATA host
+ * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
* @host: target ATA host
*
* Acquire PCI BMDMA resources and initialize @host accordingly.
@@ -540,7 +2356,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_pci_init_bmdma(struct ata_host *host)
+int ata_pci_bmdma_init(struct ata_host *host)
{
struct device *gdev = host->dev;
struct pci_dev *pdev = to_pci_dev(gdev);
@@ -585,8 +2401,22 @@
return 0;
}
+static int ata_resources_present(struct pci_dev *pdev, int port)
+{
+ int i;
+
+ /* Check the PCI resources for this channel are enabled */
+ port = port * 2;
+ for (i = 0; i < 2; i ++) {
+ if (pci_resource_start(pdev, port + i) == 0 ||
+ pci_resource_len(pdev, port + i) == 0)
+ return 0;
+ }
+ return 1;
+}
+
/**
- * ata_pci_init_sff_host - acquire native PCI ATA resources and init host
+ * ata_pci_sff_init_host - acquire native PCI ATA resources and init host
* @host: target ATA host
*
* Acquire native PCI ATA resources for @host and initialize the
@@ -604,7 +2434,7 @@
* 0 if at least one port is initialized, -ENODEV if no port is
* available.
*/
-int ata_pci_init_sff_host(struct ata_host *host)
+int ata_pci_sff_init_host(struct ata_host *host)
{
struct device *gdev = host->dev;
struct pci_dev *pdev = to_pci_dev(gdev);
@@ -646,7 +2476,7 @@
ap->ioaddr.altstatus_addr =
ap->ioaddr.ctl_addr = (void __iomem *)
((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS);
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
(unsigned long long)pci_resource_start(pdev, base),
@@ -664,7 +2494,7 @@
}
/**
- * ata_pci_prepare_sff_host - helper to prepare native PCI ATA host
+ * ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
* @pdev: target PCI device
* @ppi: array of port_info, must be enough for two ports
* @r_host: out argument for the initialized ATA host
@@ -678,7 +2508,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_pci_prepare_sff_host(struct pci_dev *pdev,
+int ata_pci_sff_prepare_host(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
struct ata_host **r_host)
{
@@ -696,12 +2526,12 @@
goto err_out;
}
- rc = ata_pci_init_sff_host(host);
+ rc = ata_pci_sff_init_host(host);
if (rc)
goto err_out;
/* init DMA related stuff */
- rc = ata_pci_init_bmdma(host);
+ rc = ata_pci_bmdma_init(host);
if (rc)
goto err_bmdma;
@@ -722,7 +2552,7 @@
}
/**
- * ata_pci_activate_sff_host - start SFF host, request IRQ and register it
+ * ata_pci_sff_activate_host - start SFF host, request IRQ and register it
* @host: target SFF ATA host
* @irq_handler: irq_handler used when requesting IRQ(s)
* @sht: scsi_host_template to use when registering the host
@@ -737,7 +2567,7 @@
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_pci_activate_sff_host(struct ata_host *host,
+int ata_pci_sff_activate_host(struct ata_host *host,
irq_handler_t irq_handler,
struct scsi_host_template *sht)
{
@@ -815,9 +2645,11 @@
}
/**
- * ata_pci_init_one - Initialize/register PCI IDE host controller
+ * ata_pci_sff_init_one - Initialize/register PCI IDE host controller
* @pdev: Controller to be initialized
* @ppi: array of port_info, must be enough for two ports
+ * @sht: scsi_host_template to use when registering the host
+ * @host_priv: host private_data
*
* This is a helper function which can be called from a driver's
* xxx_init_one() probe function if the hardware uses traditional
@@ -837,8 +2669,9 @@
* RETURNS:
* Zero on success, negative on errno-based value on error.
*/
-int ata_pci_init_one(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi)
+int ata_pci_sff_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct scsi_host_template *sht, void *host_priv)
{
struct device *dev = &pdev->dev;
const struct ata_port_info *pi = NULL;
@@ -869,13 +2702,13 @@
goto out;
/* prepare and activate SFF host */
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
goto out;
+ host->private_data = host_priv;
pci_set_master(pdev);
- rc = ata_pci_activate_sff_host(host, pi->port_ops->irq_handler,
- pi->sht);
+ rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
out:
if (rc == 0)
devres_remove_group(&pdev->dev, NULL);
@@ -885,41 +2718,52 @@
return rc;
}
-/**
- * ata_pci_clear_simplex - attempt to kick device out of simplex
- * @pdev: PCI device
- *
- * Some PCI ATA devices report simplex mode but in fact can be told to
- * enter non simplex mode. This implements the necessary logic to
- * perform the task on such devices. Calling it on other devices will
- * have -undefined- behaviour.
- */
-
-int ata_pci_clear_simplex(struct pci_dev *pdev)
-{
- unsigned long bmdma = pci_resource_start(pdev, 4);
- u8 simplex;
-
- if (bmdma == 0)
- return -ENOENT;
-
- simplex = inb(bmdma + 0x02);
- outb(simplex & 0x60, bmdma + 0x02);
- simplex = inb(bmdma + 0x02);
- if (simplex & 0x80)
- return -EOPNOTSUPP;
- return 0;
-}
-
-unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask)
-{
- /* Filter out DMA modes if the device has been configured by
- the BIOS as PIO only */
-
- if (adev->link->ap->ioaddr.bmdma_addr == NULL)
- xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- return xfer_mask;
-}
-
#endif /* CONFIG_PCI */
+EXPORT_SYMBOL_GPL(ata_sff_port_ops);
+EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
+EXPORT_SYMBOL_GPL(ata_sff_qc_prep);
+EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
+EXPORT_SYMBOL_GPL(ata_sff_dev_select);
+EXPORT_SYMBOL_GPL(ata_sff_check_status);
+EXPORT_SYMBOL_GPL(ata_sff_altstatus);
+EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
+EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
+EXPORT_SYMBOL_GPL(ata_sff_tf_load);
+EXPORT_SYMBOL_GPL(ata_sff_tf_read);
+EXPORT_SYMBOL_GPL(ata_sff_exec_command);
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer_noirq);
+EXPORT_SYMBOL_GPL(ata_sff_irq_on);
+EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
+EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
+EXPORT_SYMBOL_GPL(ata_sff_qc_issue);
+EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
+EXPORT_SYMBOL_GPL(ata_sff_host_intr);
+EXPORT_SYMBOL_GPL(ata_sff_interrupt);
+EXPORT_SYMBOL_GPL(ata_sff_freeze);
+EXPORT_SYMBOL_GPL(ata_sff_thaw);
+EXPORT_SYMBOL_GPL(ata_sff_prereset);
+EXPORT_SYMBOL_GPL(ata_sff_dev_classify);
+EXPORT_SYMBOL_GPL(ata_sff_wait_after_reset);
+EXPORT_SYMBOL_GPL(ata_sff_softreset);
+EXPORT_SYMBOL_GPL(sata_sff_hardreset);
+EXPORT_SYMBOL_GPL(ata_sff_postreset);
+EXPORT_SYMBOL_GPL(ata_sff_error_handler);
+EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
+EXPORT_SYMBOL_GPL(ata_sff_port_start);
+EXPORT_SYMBOL_GPL(ata_sff_std_ports);
+EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
+EXPORT_SYMBOL_GPL(ata_bmdma_setup);
+EXPORT_SYMBOL_GPL(ata_bmdma_start);
+EXPORT_SYMBOL_GPL(ata_bmdma_stop);
+EXPORT_SYMBOL_GPL(ata_bmdma_status);
+EXPORT_SYMBOL_GPL(ata_bus_reset);
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
+EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
+EXPORT_SYMBOL_GPL(ata_pci_sff_prepare_host);
+EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
+EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
+#endif /* CONFIG_PCI */
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index aa884f7..4aeeabb 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -38,6 +38,17 @@
void (*done)(struct scsi_cmnd *);
};
+static inline int ata_is_builtin_hardreset(ata_reset_fn_t reset)
+{
+ if (reset == sata_std_hardreset)
+ return 1;
+#ifdef CONFIG_ATA_SFF
+ if (reset == sata_sff_hardreset)
+ return 1;
+#endif
+ return 0;
+}
+
/* libata-core.c */
enum {
/* flags for ata_dev_read_id() */
@@ -61,12 +72,16 @@
extern int libata_noacpi;
extern int libata_allow_tpm;
extern void ata_force_cbl(struct ata_port *ap);
+extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
+extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
extern void ata_dev_disable(struct ata_device *dev);
+extern void ata_pio_queue_task(struct ata_port *ap, void *data,
+ unsigned long delay);
extern void ata_port_flush_task(struct ata_port *ap);
extern unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
@@ -77,6 +92,8 @@
int dma_dir, struct scatterlist *sg,
unsigned int n_elem, unsigned long timeout);
extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
+extern int ata_wait_ready(struct ata_link *link, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link));
extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
unsigned int flags, u16 *id);
extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
@@ -91,10 +108,7 @@
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
-extern void ata_dev_select(struct ata_port *ap, unsigned int device,
- unsigned int wait, unsigned int can_sleep);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
-extern int ata_flush_cache(struct ata_device *dev);
extern void ata_dev_init(struct ata_device *dev);
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
extern int sata_link_init_spd(struct ata_link *link);
@@ -165,11 +179,6 @@
extern void ata_scsi_dev_rescan(struct work_struct *work);
extern int ata_bus_probe(struct ata_port *ap);
-/* libata-pmp.c */
-extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
-extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
-extern int sata_pmp_attach(struct ata_device *dev);
-
/* libata-eh.c */
extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
extern void ata_scsi_error(struct Scsi_Host *host);
@@ -193,8 +202,34 @@
struct ata_link **r_failed_disk);
extern void ata_eh_finish(struct ata_port *ap);
-/* libata-sff.c */
-extern u8 ata_irq_on(struct ata_port *ap);
+/* libata-pmp.c */
+#ifdef CONFIG_SATA_PMP
+extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
+extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
+extern int sata_pmp_attach(struct ata_device *dev);
+#else /* CONFIG_SATA_PMP */
+static inline int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val)
+{
+ return -EINVAL;
+}
+static inline int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
+{
+ return -EINVAL;
+}
+
+static inline int sata_pmp_attach(struct ata_device *dev)
+{
+ return -EINVAL;
+}
+#endif /* CONFIG_SATA_PMP */
+
+/* libata-sff.c */
+#ifdef CONFIG_ATA_SFF
+extern void ata_dev_select(struct ata_port *ap, unsigned int device,
+ unsigned int wait, unsigned int can_sleep);
+extern u8 ata_irq_on(struct ata_port *ap);
+extern void ata_pio_task(struct work_struct *work);
+#endif /* CONFIG_ATA_SFF */
#endif /* __LIBATA_H__ */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index bdc3b9d..c5f91e6 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -47,7 +47,7 @@
if (ap->acpi_handle == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
return -ENODEV;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -68,20 +68,6 @@
}
/**
- * pacpi_error_handler - Setup and error handler
- * @ap: Port to handle
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void pacpi_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, pacpi_pre_reset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
* pacpi_discover_modes - filter non ACPI modes
* @adev: ATA device
* @mask: proposed modes
@@ -120,7 +106,7 @@
static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
{
struct pata_acpi *acpi = adev->link->ap->private_data;
- return ata_pci_default_filter(adev, mask & acpi->mask[adev->devno]);
+ return ata_bmdma_mode_filter(adev, mask & acpi->mask[adev->devno]);
}
/**
@@ -176,7 +162,7 @@
}
/**
- * pacpi_qc_issue_prot - command issue
+ * pacpi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -184,14 +170,14 @@
* neccessary.
*/
-static unsigned int pacpi_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
struct pata_acpi *acpi = ap->private_data;
if (acpi->gtm.flags & 0x10)
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
if (adev != acpi->last) {
pacpi_set_piomode(ap, adev);
@@ -199,7 +185,7 @@
pacpi_set_dmamode(ap, adev);
acpi->last = adev;
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
/**
@@ -232,57 +218,17 @@
}
static struct scsi_host_template pacpi_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- /* Use standard CHS mapping rules */
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations pacpi_ops = {
+static struct ata_port_operations pacpi_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .qc_issue = pacpi_qc_issue,
+ .cable_detect = pacpi_cable_detect,
+ .mode_filter = pacpi_mode_filter,
.set_piomode = pacpi_set_piomode,
.set_dmamode = pacpi_set_dmamode,
- .mode_filter = pacpi_mode_filter,
-
- /* Task file is PCI ATA format, use helpers */
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = pacpi_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = pacpi_cable_detect,
-
- /* BMDMA handling is PCI ATA format, use helpers */
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = pacpi_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- /* Timeout handling */
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- /* Generic PATA PCI ATA helpers */
+ .prereset = pacpi_pre_reset,
.port_start = pacpi_port_start,
};
@@ -304,7 +250,6 @@
static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &pacpi_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@@ -314,7 +259,7 @@
.port_ops = &pacpi_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL);
}
static const struct pci_device_id pacpi_pci_tbl[] = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 8786455..fcabe46 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -36,6 +36,10 @@
#define DRV_NAME "pata_ali"
#define DRV_VERSION "0.7.5"
+static int ali_atapi_dma = 0;
+module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
+MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
+
/*
* Cable special cases
*/
@@ -117,7 +121,7 @@
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strstr(model_num, "WDC"))
return mask &= ~ATA_MASK_UDMA;
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -270,6 +274,27 @@
}
/**
+ * ali_warn_atapi_dma - Warn about ATAPI DMA disablement
+ * @adev: Device
+ *
+ * Whine about ATAPI DMA disablement if @adev is an ATAPI device.
+ * Can be used as ->dev_config.
+ */
+
+static void ali_warn_atapi_dma(struct ata_device *adev)
+{
+ struct ata_eh_context *ehc = &adev->link->eh_context;
+ int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
+
+ if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
+ ata_dev_printk(adev, KERN_WARNING,
+ "WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled\n");
+ ata_dev_printk(adev, KERN_WARNING,
+ "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
+ }
+}
+
+/**
* ali_lock_sectors - Keep older devices to 255 sector mode
* @adev: Device
*
@@ -283,6 +308,7 @@
static void ali_lock_sectors(struct ata_device *adev)
{
adev->max_sectors = 255;
+ ali_warn_atapi_dma(adev);
}
/**
@@ -294,6 +320,18 @@
static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
{
+ if (!ali_atapi_dma) {
+ /* FIXME: pata_ali can't do ATAPI DMA reliably but the
+ * IDE alim15x3 driver can. I tried lots of things
+ * but couldn't find what the actual difference was.
+ * If you got an idea, please write it to
+ * linux-ide@vger.kernel.org and cc htejun@gmail.com.
+ *
+ * Disable ATAPI DMA for now.
+ */
+ return -EOPNOTSUPP;
+ }
+
/* If its not a media command, its not worth it */
if (atapi_cmd_type(qc->cdb[0]) == ATAPI_MISC)
return -EOPNOTSUPP;
@@ -301,21 +339,7 @@
}
static struct scsi_host_template ali_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
/*
@@ -323,29 +347,15 @@
*/
static struct ata_port_operations ali_early_port_ops = {
- .set_piomode = ali_set_piomode,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
+ .set_piomode = ali_set_piomode,
+};
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+static const struct ata_port_operations ali_dma_base_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .set_piomode = ali_set_piomode,
+ .set_dmamode = ali_set_dmamode,
};
/*
@@ -353,113 +363,31 @@
* detect
*/
static struct ata_port_operations ali_20_port_ops = {
- .set_piomode = ali_set_piomode,
- .set_dmamode = ali_set_dmamode,
- .mode_filter = ali_20_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
- .dev_config = ali_lock_sectors,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ali_dma_base_ops,
.cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .mode_filter = ali_20_filter,
+ .check_atapi_dma = ali_check_atapi_dma,
+ .dev_config = ali_lock_sectors,
};
/*
* Port operations for DMA capable ALi with cable detect
*/
static struct ata_port_operations ali_c2_port_ops = {
- .set_piomode = ali_set_piomode,
- .set_dmamode = ali_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
+ .inherits = &ali_dma_base_ops,
.check_atapi_dma = ali_check_atapi_dma,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
- .dev_config = ali_lock_sectors,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ali_c2_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .dev_config = ali_lock_sectors,
};
/*
* Port operations for DMA capable ALi with cable detect and LBA48
*/
static struct ata_port_operations ali_c5_port_ops = {
- .set_piomode = ali_set_piomode,
- .set_dmamode = ali_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
+ .inherits = &ali_dma_base_ops,
.check_atapi_dma = ali_check_atapi_dma,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .dev_config = ali_warn_atapi_dma,
.cable_detect = ali_c2_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
@@ -521,7 +449,7 @@
}
pci_dev_put(isa_bridge);
pci_dev_put(north);
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
}
/**
* ali_init_one - discovery callback
@@ -535,14 +463,12 @@
static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info_early = {
- .sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &ali_early_port_ops
};
/* Revision 0x20 added DMA */
static const struct ata_port_info info_20 = {
- .sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -550,7 +476,6 @@
};
/* Revision 0x20 with support logic added UDMA */
static const struct ata_port_info info_20_udma = {
- .sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -559,7 +484,6 @@
};
/* Revision 0xC2 adds UDMA66 */
static const struct ata_port_info info_c2 = {
- .sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -568,7 +492,6 @@
};
/* Revision 0xC3 is UDMA66 for now */
static const struct ata_port_info info_c3 = {
- .sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -577,7 +500,6 @@
};
/* Revision 0xC4 is UDMA100 */
static const struct ata_port_info info_c4 = {
- .sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -586,7 +508,6 @@
};
/* Revision 0xC5 is UDMA133 with LBA48 DMA */
static const struct ata_port_info info_c5 = {
- .sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -597,6 +518,11 @@
const struct ata_port_info *ppi[] = { NULL, NULL };
u8 tmp;
struct pci_dev *isa_bridge;
+ int rc;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
/*
* The chipset revision selects the driver operations and
@@ -626,14 +552,21 @@
ppi[0] = &info_20_udma;
pci_dev_put(isa_bridge);
}
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
}
#ifdef CONFIG_PM
static int ali_reinit_one(struct pci_dev *pdev)
{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
ali_init_chipset(pdev);
- return ata_pci_device_resume(pdev);
+ ata_host_resume(host);
+ return 0;
}
#endif
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 4b8d9b5..26665c3 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -56,7 +56,9 @@
u8 t;
T = 1000000000 / amd_clock;
- UT = T / min_t(int, max_t(int, clock, 1), 2);
+ UT = T;
+ if (clock >= 2)
+ UT = T / 2;
if (ata_timing_compute(adev, speed, &at, T, UT) < 0) {
dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed);
@@ -141,13 +143,7 @@
if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-static void amd_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, amd_pre_reset, ata_std_softreset, NULL,
- ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
static int amd_cable_detect(struct ata_port *ap)
@@ -297,14 +293,7 @@
if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-static void nv_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, nv_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -353,228 +342,66 @@
}
static struct scsi_host_template amd_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static const struct ata_port_operations amd_base_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .prereset = amd_pre_reset,
};
static struct ata_port_operations amd33_port_ops = {
+ .inherits = &amd_base_port_ops,
+ .cable_detect = ata_cable_40wire,
.set_piomode = amd33_set_piomode,
.set_dmamode = amd33_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = amd_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
static struct ata_port_operations amd66_port_ops = {
+ .inherits = &amd_base_port_ops,
+ .cable_detect = ata_cable_unknown,
.set_piomode = amd66_set_piomode,
.set_dmamode = amd66_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = amd_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_unknown,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
static struct ata_port_operations amd100_port_ops = {
+ .inherits = &amd_base_port_ops,
+ .cable_detect = ata_cable_unknown,
.set_piomode = amd100_set_piomode,
.set_dmamode = amd100_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = amd_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_unknown,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
static struct ata_port_operations amd133_port_ops = {
+ .inherits = &amd_base_port_ops,
+ .cable_detect = amd_cable_detect,
.set_piomode = amd133_set_piomode,
.set_dmamode = amd133_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
+};
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = amd_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = amd_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+static const struct ata_port_operations nv_base_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_ignore,
+ .mode_filter = nv_mode_filter,
+ .prereset = nv_pre_reset,
+ .host_stop = nv_host_stop,
};
static struct ata_port_operations nv100_port_ops = {
+ .inherits = &nv_base_port_ops,
.set_piomode = nv100_set_piomode,
.set_dmamode = nv100_set_dmamode,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = nv_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_ignore,
- .mode_filter = nv_mode_filter,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
- .host_stop = nv_host_stop,
};
static struct ata_port_operations nv133_port_ops = {
+ .inherits = &nv_base_port_ops,
.set_piomode = nv133_set_piomode,
.set_dmamode = nv133_set_dmamode,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = nv_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_ignore,
- .mode_filter = nv_mode_filter,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
- .host_stop = nv_host_stop,
};
static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info[10] = {
{ /* 0: AMD 7401 */
- .sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07, /* No SWDMA */
@@ -582,7 +409,6 @@
.port_ops = &amd33_port_ops
},
{ /* 1: Early AMD7409 - no swdma */
- .sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -590,7 +416,6 @@
.port_ops = &amd66_port_ops
},
{ /* 2: AMD 7409, no swdma errata */
- .sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -598,7 +423,6 @@
.port_ops = &amd66_port_ops
},
{ /* 3: AMD 7411 */
- .sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -606,7 +430,6 @@
.port_ops = &amd100_port_ops
},
{ /* 4: AMD 7441 */
- .sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -614,7 +437,6 @@
.port_ops = &amd100_port_ops
},
{ /* 5: AMD 8111*/
- .sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -622,7 +444,6 @@
.port_ops = &amd133_port_ops
},
{ /* 6: AMD 8111 UDMA 100 (Serenade) */
- .sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -630,7 +451,6 @@
.port_ops = &amd133_port_ops
},
{ /* 7: Nvidia Nforce */
- .sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -638,7 +458,6 @@
.port_ops = &nv100_port_ops
},
{ /* 8: Nvidia Nforce2 and later */
- .sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -646,7 +465,6 @@
.port_ops = &nv133_port_ops
},
{ /* 9: AMD CS5536 (Geode companion) */
- .sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -654,15 +472,20 @@
.port_ops = &amd100_port_ops
}
};
- struct ata_port_info pi;
- const struct ata_port_info *ppi[] = { &pi, NULL };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
static int printed_version;
int type = id->driver_data;
+ void *hpriv = NULL;
u8 fifo;
+ int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
pci_read_config_byte(pdev, 0x41, &fifo);
/* Check for AMD7409 without swdma errata and if found adjust type */
@@ -677,10 +500,10 @@
/*
* Okay, type is determined now. Apply type-specific workarounds.
*/
- pi = info[type];
+ ppi[0] = &info[type];
if (type < 3)
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
/* Check for AMD7411 */
if (type == 3)
@@ -696,16 +519,23 @@
u32 udma;
pci_read_config_dword(pdev, 0x60, &udma);
- pi.private_data = (void *)(unsigned long)udma;
+ hpriv = (void *)(unsigned long)udma;
}
/* And fire it up */
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv);
}
#ifdef CONFIG_PM
static int amd_reinit_one(struct pci_dev *pdev)
{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
if (pdev->vendor == PCI_VENDOR_ID_AMD) {
u8 fifo;
pci_read_config_byte(pdev, 0x41, &fifo);
@@ -716,9 +546,11 @@
pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
}
- return ata_pci_device_resume(pdev);
+
+ ata_host_resume(host);
+ return 0;
}
#endif
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index d421831..0f513bc 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -52,22 +52,7 @@
if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * artop6210_error_handler - Probe specified port on PATA host controller
- * @ap: Port to probe
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void artop6210_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, artop6210_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -93,7 +78,7 @@
if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -114,21 +99,6 @@
}
/**
- * artop6260_error_handler - Probe specified port on PATA host controller
- * @ap: Port to probe
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void artop6260_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, artop6260_pre_reset,
- ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-/**
* artop6210_load_piomode - Load a set of PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: Device
@@ -314,85 +284,23 @@
}
static struct scsi_host_template artop_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations artop6210_ops = {
+static struct ata_port_operations artop6210_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_40wire,
.set_piomode = artop6210_set_piomode,
.set_dmamode = artop6210_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = artop6210_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .prereset = artop6210_pre_reset,
};
-static const struct ata_port_operations artop6260_ops = {
+static struct ata_port_operations artop6260_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = artop6260_cable_detect,
.set_piomode = artop6260_set_piomode,
.set_dmamode = artop6260_set_dmamode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = artop6260_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = artop6260_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .prereset = artop6260_pre_reset,
};
@@ -414,7 +322,6 @@
{
static int printed_version;
static const struct ata_port_info info_6210 = {
- .sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -422,7 +329,6 @@
.port_ops = &artop6210_ops,
};
static const struct ata_port_info info_626x = {
- .sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -430,7 +336,6 @@
.port_ops = &artop6260_ops,
};
static const struct ata_port_info info_628x = {
- .sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -438,7 +343,6 @@
.port_ops = &artop6260_ops,
};
static const struct ata_port_info info_628x_fast = {
- .sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -446,11 +350,16 @@
.port_ops = &artop6260_ops,
};
const struct ata_port_info *ppi[] = { NULL, NULL };
+ int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
if (id->driver_data == 0) { /* 6210 variant */
ppi[0] = &info_6210;
ppi[1] = &ata_dummy_port_info;
@@ -491,7 +400,7 @@
BUG_ON(ppi[0] == NULL);
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL);
}
static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index db057b1..3e8651d 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -166,52 +166,14 @@
}
}
-static void pata_at32_irq_clear(struct ata_port *ap)
-{
- /* No DMA controller yet */
-}
-
static struct scsi_host_template at32_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations at32_port_ops = {
- .set_piomode = pata_at32_set_piomode,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_clear = pata_at32_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_piomode = pata_at32_set_piomode,
};
static int __init pata_at32_init_one(struct device *dev,
@@ -261,7 +223,7 @@
host->private_data = info;
/* Register ATA device and return */
- return ata_host_activate(host, info->irq, ata_interrupt,
+ return ata_host_activate(host, info->irq, ata_sff_interrupt,
IRQF_SHARED | IRQF_TRIGGER_RISING,
&at32_sht);
}
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 408bdc1..78738fb 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -45,12 +45,7 @@
if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-static void atiixp_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, atiixp_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
static int atiixp_cable_detect(struct ata_port *ap)
@@ -221,60 +216,26 @@
}
static struct scsi_host_template atiixp_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_BMDMA_SHT(DRV_NAME),
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
static struct ata_port_operations atiixp_port_ops = {
- .set_piomode = atiixp_set_piomode,
- .set_dmamode = atiixp_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
+ .inherits = &ata_bmdma_port_ops,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = atiixp_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = atiixp_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
+ .qc_prep = ata_sff_dumb_qc_prep,
.bmdma_start = atiixp_bmdma_start,
.bmdma_stop = atiixp_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_dumb_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .cable_detect = atiixp_cable_detect,
+ .set_piomode = atiixp_set_piomode,
+ .set_dmamode = atiixp_set_dmamode,
+ .prereset = atiixp_pre_reset,
};
static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &atiixp_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x06, /* No MWDMA0 support */
@@ -282,7 +243,7 @@
.port_ops = &atiixp_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &atiixp_sht, NULL);
}
static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 7f87f10..0a5ad98 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -674,7 +674,7 @@
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
- * Note: Original code is ata_tf_load().
+ * Note: Original code is ata_sff_tf_load().
*/
static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
@@ -745,7 +745,7 @@
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
- * Note: Original code is ata_tf_read().
+ * Note: Original code is ata_sff_tf_read().
*/
static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
@@ -775,7 +775,7 @@
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
- * Note: Original code is ata_exec_command().
+ * Note: Original code is ata_sff_exec_command().
*/
static void bfin_exec_command(struct ata_port *ap,
@@ -785,7 +785,7 @@
dev_dbg(ap->dev, "ata%u: cmd 0x%X\n", ap->print_id, tf->command);
write_atapi_register(base, ATA_REG_CMD, tf->command);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
@@ -800,14 +800,14 @@
}
/**
- * bfin_std_dev_select - Select device 0/1 on ATA bus
+ * bfin_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
*
- * Note: Original code is ata_std_dev_select().
+ * Note: Original code is ata_sff_dev_select().
*/
-static void bfin_std_dev_select(struct ata_port *ap, unsigned int device)
+static void bfin_dev_select(struct ata_port *ap, unsigned int device)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 tmp;
@@ -818,7 +818,7 @@
tmp = ATA_DEVICE_OBS | ATA_DEV1;
write_atapi_register(base, ATA_REG_DEVICE, tmp);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
@@ -977,7 +977,7 @@
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 nsect, lbal;
- bfin_std_dev_select(ap, device);
+ bfin_dev_select(ap, device);
write_atapi_register(base, ATA_REG_NSECT, 0x55);
write_atapi_register(base, ATA_REG_LBAL, 0xaa);
@@ -1014,7 +1014,7 @@
* BSY bit to clear
*/
if (dev0)
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
/* if device 1 was found in ata_devchk, wait for
* register access, then wait for BSY to clear
@@ -1023,7 +1023,7 @@
while (dev1) {
u8 nsect, lbal;
- bfin_std_dev_select(ap, 1);
+ bfin_dev_select(ap, 1);
nsect = read_atapi_register(base, ATA_REG_NSECT);
lbal = read_atapi_register(base, ATA_REG_LBAL);
if ((nsect == 1) && (lbal == 1))
@@ -1035,14 +1035,14 @@
msleep(50); /* give drive a breather */
}
if (dev1)
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
/* is all this really necessary? */
- bfin_std_dev_select(ap, 0);
+ bfin_dev_select(ap, 0);
if (dev1)
- bfin_std_dev_select(ap, 1);
+ bfin_dev_select(ap, 1);
if (dev0)
- bfin_std_dev_select(ap, 0);
+ bfin_dev_select(ap, 0);
}
/**
@@ -1088,26 +1088,21 @@
}
/**
- * bfin_std_softreset - reset host port via ATA SRST
+ * bfin_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
*
- * Note: Original code is ata_std_softreset().
+ * Note: Original code is ata_sff_softreset().
*/
-static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline)
+static int bfin_softreset(struct ata_link *link, unsigned int *classes,
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
unsigned int devmask = 0, err_mask;
u8 err;
- if (ata_link_offline(link)) {
- classes[0] = ATA_DEV_NONE;
- goto out;
- }
-
/* determine if device 0/1 are present */
if (bfin_devchk(ap, 0))
devmask |= (1 << 0);
@@ -1115,7 +1110,7 @@
devmask |= (1 << 1);
/* select device 0 again */
- bfin_std_dev_select(ap, 0);
+ bfin_dev_select(ap, 0);
/* issue bus reset */
err_mask = bfin_bus_softreset(ap, devmask);
@@ -1126,13 +1121,12 @@
}
/* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_dev_try_classify(&ap->link.device[0],
+ classes[0] = ata_sff_dev_classify(&ap->link.device[0],
devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
- classes[1] = ata_dev_try_classify(&ap->link.device[1],
+ classes[1] = ata_sff_dev_classify(&ap->link.device[1],
devmask & (1 << 1), &err);
- out:
return 0;
}
@@ -1167,7 +1161,7 @@
* @buflen: buffer length
* @write_data: read/write
*
- * Note: Original code is ata_data_xfer().
+ * Note: Original code is ata_sff_data_xfer().
*/
static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
@@ -1206,7 +1200,7 @@
* bfin_irq_clear - Clear ATAPI interrupt.
* @ap: Port associated with this ATA transaction.
*
- * Note: Original code is ata_bmdma_irq_clear().
+ * Note: Original code is ata_sff_irq_clear().
*/
static void bfin_irq_clear(struct ata_port *ap)
@@ -1223,7 +1217,7 @@
* bfin_irq_on - Enable interrupts on a port.
* @ap: Port on which interrupts are enabled.
*
- * Note: Original code is ata_irq_on().
+ * Note: Original code is ata_sff_irq_on().
*/
static unsigned char bfin_irq_on(struct ata_port *ap)
@@ -1244,13 +1238,13 @@
}
/**
- * bfin_bmdma_freeze - Freeze DMA controller port
+ * bfin_freeze - Freeze DMA controller port
* @ap: port to freeze
*
- * Note: Original code is ata_bmdma_freeze().
+ * Note: Original code is ata_sff_freeze().
*/
-static void bfin_bmdma_freeze(struct ata_port *ap)
+static void bfin_freeze(struct ata_port *ap)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@@ -1264,19 +1258,19 @@
* ATA_NIEN manipulation. Also, many controllers fail to mask
* previously pending IRQ on ATA_NIEN assertion. Clear it.
*/
- ata_chk_status(ap);
+ ap->ops->sff_check_status(ap);
bfin_irq_clear(ap);
}
/**
- * bfin_bmdma_thaw - Thaw DMA controller port
+ * bfin_thaw - Thaw DMA controller port
* @ap: port to thaw
*
- * Note: Original code is ata_bmdma_thaw().
+ * Note: Original code is ata_sff_thaw().
*/
-void bfin_bmdma_thaw(struct ata_port *ap)
+void bfin_thaw(struct ata_port *ap)
{
bfin_check_status(ap);
bfin_irq_clear(ap);
@@ -1284,14 +1278,14 @@
}
/**
- * bfin_std_postreset - standard postreset callback
+ * bfin_postreset - standard postreset callback
* @ap: the target ata_port
* @classes: classes of attached devices
*
- * Note: Original code is ata_std_postreset().
+ * Note: Original code is ata_sff_postreset().
*/
-static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
+static void bfin_postreset(struct ata_link *link, unsigned int *classes)
{
struct ata_port *ap = link->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@@ -1301,9 +1295,9 @@
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
- bfin_std_dev_select(ap, 1);
+ bfin_dev_select(ap, 1);
if (classes[1] != ATA_DEV_NONE)
- bfin_std_dev_select(ap, 0);
+ bfin_dev_select(ap, 0);
/* bail out if no device is present */
if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
@@ -1314,17 +1308,6 @@
write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
}
-/**
- * bfin_error_handler - Stock error handler for DMA controller
- * @ap: port to handle error for
- */
-
-static void bfin_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, bfin_std_softreset, NULL,
- bfin_std_postreset);
-}
-
static void bfin_port_stop(struct ata_port *ap)
{
dev_dbg(ap->dev, "in atapi port stop\n");
@@ -1357,51 +1340,40 @@
}
static struct scsi_host_template bfin_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = SG_NONE,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
static const struct ata_port_operations bfin_pata_ops = {
+ .inherits = &ata_sff_port_ops,
+
.set_piomode = bfin_set_piomode,
.set_dmamode = bfin_set_dmamode,
- .tf_load = bfin_tf_load,
- .tf_read = bfin_tf_read,
- .exec_command = bfin_exec_command,
- .check_status = bfin_check_status,
- .check_altstatus = bfin_check_altstatus,
- .dev_select = bfin_std_dev_select,
+ .sff_tf_load = bfin_tf_load,
+ .sff_tf_read = bfin_tf_read,
+ .sff_exec_command = bfin_exec_command,
+ .sff_check_status = bfin_check_status,
+ .sff_check_altstatus = bfin_check_altstatus,
+ .sff_dev_select = bfin_dev_select,
.bmdma_setup = bfin_bmdma_setup,
.bmdma_start = bfin_bmdma_start,
.bmdma_stop = bfin_bmdma_stop,
.bmdma_status = bfin_bmdma_status,
- .data_xfer = bfin_data_xfer,
+ .sff_data_xfer = bfin_data_xfer,
.qc_prep = ata_noop_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .freeze = bfin_bmdma_freeze,
- .thaw = bfin_bmdma_thaw,
- .error_handler = bfin_error_handler,
+ .freeze = bfin_freeze,
+ .thaw = bfin_thaw,
+ .softreset = bfin_softreset,
+ .postreset = bfin_postreset,
.post_internal_cmd = bfin_bmdma_stop,
- .irq_handler = ata_interrupt,
- .irq_clear = bfin_irq_clear,
- .irq_on = bfin_irq_on,
+ .sff_irq_clear = bfin_irq_clear,
+ .sff_irq_on = bfin_irq_on,
.port_start = bfin_port_start,
.port_stop = bfin_port_stop,
@@ -1409,7 +1381,6 @@
static struct ata_port_info bfin_port_info[] = {
{
- .sht = &bfin_sht,
.flags = ATA_FLAG_SLAVE_POSS
| ATA_FLAG_MMIO
| ATA_FLAG_NO_LEGACY,
@@ -1536,7 +1507,7 @@
}
if (ata_host_activate(host, platform_get_irq(pdev, 0),
- ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) {
+ ata_sff_interrupt, IRQF_SHARED, &bfin_sht) != 0) {
peripheral_free_list(atapi_io_port);
dev_err(&pdev->dev, "Fail to attach ATAPI device\n");
return -ENODEV;
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 43d198f..2de30b9 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -107,8 +107,8 @@
pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
} else {
/* Save the shared timings for channel, they will be loaded
- by qc_issue_prot. Reloading the setup time is expensive
- so we keep a merged one loaded */
+ by qc_issue. Reloading the setup time is expensive so we
+ keep a merged one loaded */
pci_read_config_byte(pdev, ARTIM23, ®);
reg &= 0x3F;
reg |= t.setup;
@@ -119,14 +119,14 @@
/**
- * cmd640_qc_issue_prot - command preparation hook
+ * cmd640_qc_issue - command preparation hook
* @qc: Command to be issued
*
* Channel 1 has shared timings. We must reprogram the
* clock each drive 2/3 switch we do.
*/
-static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int cmd640_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -137,7 +137,7 @@
pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
timing->last = adev->devno;
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
/**
@@ -166,53 +166,16 @@
}
static struct scsi_host_template cmd640_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations cmd640_port_ops = {
- .set_piomode = cmd640_set_piomode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_bmdma_port_ops,
+ /* In theory xfer_noirq is not needed once we kill the prefetcher */
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
+ .qc_issue = cmd640_qc_issue,
.cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = cmd640_qc_issue_prot,
-
- /* In theory this is not needed once we kill the prefetcher */
- .data_xfer = ata_data_xfer_noirq,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
+ .set_piomode = cmd640_set_piomode,
.port_start = cmd640_port_start,
};
@@ -248,26 +211,36 @@
static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &cmd640_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &cmd640_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
+ int rc;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
cmd640_hardware_init(pdev);
- return ata_pci_init_one(pdev, ppi);
+
+ return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL);
}
+#ifdef CONFIG_PM
static int cmd640_reinit_one(struct pci_dev *pdev)
{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
cmd640_hardware_init(pdev);
-#ifdef CONFIG_PM
- return ata_pci_device_resume(pdev);
-#else
+ ata_host_resume(host);
return 0;
-#endif
}
+#endif
static const struct pci_device_id cmd640[] = {
{ PCI_VDEVICE(CMD, 0x640), 0 },
@@ -281,8 +254,8 @@
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
-#endif
.resume = cmd640_reinit_one,
+#endif
};
static int __init cmd640_init(void)
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 7acbbd9..ddd09b7 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -266,120 +266,30 @@
}
static struct scsi_host_template cmd64x_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static const struct ata_port_operations cmd64x_base_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .set_piomode = cmd64x_set_piomode,
+ .set_dmamode = cmd64x_set_dmamode,
};
static struct ata_port_operations cmd64x_port_ops = {
- .set_piomode = cmd64x_set_piomode,
- .set_dmamode = cmd64x_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &cmd64x_base_ops,
.cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
};
static struct ata_port_operations cmd646r1_port_ops = {
- .set_piomode = cmd64x_set_piomode,
- .set_dmamode = cmd64x_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
+ .inherits = &cmd64x_base_ops,
.bmdma_stop = cmd646r1_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
+ .cable_detect = ata_cable_40wire,
};
static struct ata_port_operations cmd648_port_ops = {
- .set_piomode = cmd64x_set_piomode,
- .set_dmamode = cmd64x_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = cmd648_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
+ .inherits = &cmd64x_base_ops,
.bmdma_stop = cmd648_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
+ .cable_detect = cmd648_cable_detect,
};
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -388,21 +298,18 @@
static const struct ata_port_info cmd_info[6] = {
{ /* CMD 643 - no UDMA */
- .sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &cmd64x_port_ops
},
{ /* CMD 646 with broken UDMA */
- .sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &cmd64x_port_ops
},
{ /* CMD 646 with working UDMA */
- .sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -410,14 +317,12 @@
.port_ops = &cmd64x_port_ops
},
{ /* CMD 646 rev 1 */
- .sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &cmd646r1_port_ops
},
{ /* CMD 648 */
- .sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -425,7 +330,6 @@
.port_ops = &cmd648_port_ops
},
{ /* CMD 649 */
- .sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -435,12 +339,17 @@
};
const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
u8 mrdmode;
+ int rc;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
if (id->driver_data == 0) /* 643 */
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
/* Does UDMA work ? */
@@ -464,13 +373,20 @@
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL);
}
#ifdef CONFIG_PM
static int cmd64x_reinit_one(struct pci_dev *pdev)
{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
u8 mrdmode;
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
pci_read_config_byte(pdev, MRDMODE, &mrdmode);
mrdmode &= ~ 0x30; /* IRQ set up */
@@ -479,7 +395,8 @@
#ifdef CONFIG_PPC
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
- return ata_pci_device_resume(pdev);
+ ata_host_resume(host);
+ return 0;
}
#endif
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 7ed279b..1186bcd 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -140,51 +140,16 @@
}
static struct scsi_host_template cs5520_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_BMDMA_SHT(DRV_NAME),
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
static struct ata_port_operations cs5520_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .qc_prep = ata_sff_dumb_qc_prep,
+ .cable_detect = ata_cable_40wire,
.set_piomode = cs5520_set_piomode,
.set_dmamode = cs5520_set_dmamode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_dumb_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -203,6 +168,10 @@
struct ata_ioports *ioaddr;
int i, rc;
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
/* IDE port enable bits */
pci_read_config_byte(pdev, 0x60, &pcicfg);
@@ -258,7 +227,7 @@
ioaddr->ctl_addr = iomap[1];
ioaddr->altstatus_addr = iomap[1];
ioaddr->bmdma_addr = iomap[4];
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[0],
"cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]);
@@ -269,7 +238,7 @@
ioaddr->ctl_addr = iomap[3];
ioaddr->altstatus_addr = iomap[3];
ioaddr->bmdma_addr = iomap[4] + 8;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[1],
"cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]);
@@ -289,7 +258,7 @@
continue;
rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
- ata_interrupt, 0, DRV_NAME, host);
+ ata_sff_interrupt, 0, DRV_NAME, host);
if (rc)
return rc;
@@ -310,11 +279,20 @@
static int cs5520_reinit_one(struct pci_dev *pdev)
{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
u8 pcicfg;
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
pci_read_config_byte(pdev, 0x60, &pcicfg);
if ((pcicfg & 0x40) == 0)
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
- return ata_pci_device_resume(pdev);
+
+ ata_host_resume(host);
+ return 0;
}
/**
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index e1818fd..744beeb 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -133,7 +133,7 @@
}
/**
- * cs5530_qc_issue_prot - command issue
+ * cs5530_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -142,7 +142,7 @@
* one MWDMA/UDMA bit.
*/
-static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -157,59 +157,23 @@
cs5530_set_dmamode(ap, adev);
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template cs5530_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_DUMB_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
+ .sg_tablesize = LIBATA_DUMB_MAX_PRD,
};
static struct ata_port_operations cs5530_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
+ .qc_prep = ata_sff_dumb_qc_prep,
+ .qc_issue = cs5530_qc_issue,
+
+ .cable_detect = ata_cable_40wire,
.set_piomode = cs5530_set_piomode,
.set_dmamode = cs5530_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_dumb_qc_prep,
- .qc_issue = cs5530_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
static const struct dmi_system_id palmax_dmi_table[] = {
@@ -334,7 +298,6 @@
static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &cs5530_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -343,12 +306,16 @@
};
/* The docking connector doesn't do UDMA, and it seems not MWDMA */
static const struct ata_port_info info_palmax_secondary = {
- .sht = &cs5530_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &cs5530_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
+ int rc;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
/* Chip initialisation */
if (cs5530_init_chip())
@@ -358,16 +325,25 @@
ppi[1] = &info_palmax_secondary;
/* Now kick off ATA set up */
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL);
}
#ifdef CONFIG_PM
static int cs5530_reinit_one(struct pci_dev *pdev)
{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
/* If we fail on resume we are doomed */
if (cs5530_init_chip())
- BUG();
- return ata_pci_device_resume(pdev);
+ return -EIO;
+
+ ata_host_resume(host);
+ return 0;
}
#endif /* CONFIG_PM */
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 0132453..f1b6556 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -158,55 +158,14 @@
}
static struct scsi_host_template cs5535_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations cs5535_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = cs5535_cable_detect,
.set_piomode = cs5535_set_piomode,
.set_dmamode = cs5535_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = cs5535_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/**
@@ -222,7 +181,6 @@
static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &cs5535_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -241,7 +199,7 @@
rdmsr(ATAC_CH0D1_PIO, timings, dummy);
if (CS5535_BAD_PIO(timings))
wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL);
}
static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 1c4ff9b..73f8332 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -221,55 +221,14 @@
}
static struct scsi_host_template cs5536_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations cs5536_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = cs5536_cable_detect,
.set_piomode = cs5536_set_piomode,
.set_dmamode = cs5536_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = cs5536_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
};
/**
@@ -282,7 +241,6 @@
static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &cs5536_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -303,7 +261,7 @@
return -ENODEV;
}
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL);
}
static const struct pci_device_id cs5536[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index fc5f9c4..a9c3218 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -110,61 +110,19 @@
}
static struct scsi_host_template cy82c693_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations cy82c693_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_40wire,
.set_piomode = cy82c693_set_piomode,
.set_dmamode = cy82c693_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &cy82c693_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -178,7 +136,7 @@
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL);
}
static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index dc33220..9fba829 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -45,20 +45,7 @@
if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * efar_probe_reset - Probe specified port on PATA host controller
- * @ap: Port to probe
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void efar_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, efar_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -233,53 +220,15 @@
}
static struct scsi_host_template efar_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations efar_ops = {
+static struct ata_port_operations efar_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = efar_cable_detect,
.set_piomode = efar_set_piomode,
.set_dmamode = efar_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = efar_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = efar_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .prereset = efar_pre_reset,
};
@@ -301,7 +250,6 @@
{
static int printed_version;
static const struct ata_port_info info = {
- .sht = &efar_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma1-2 */
@@ -314,7 +262,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL);
}
static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index a742efa..f2b83ea 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -184,7 +184,7 @@
if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
mask &= ~(0xF0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -290,21 +290,7 @@
}
static struct scsi_host_template hpt36x_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
/*
@@ -312,37 +298,11 @@
*/
static struct ata_port_operations hpt366_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = hpt36x_cable_detect,
+ .mode_filter = hpt366_filter,
.set_piomode = hpt366_set_piomode,
.set_dmamode = hpt366_set_dmamode,
- .mode_filter = hpt366_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = hpt36x_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/**
@@ -390,18 +350,22 @@
static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info_hpt366 = {
- .sht = &hpt36x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA4,
.port_ops = &hpt366_port_ops
};
- struct ata_port_info info = info_hpt366;
- const struct ata_port_info *ppi[] = { &info, NULL };
+ const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
+ void *hpriv = NULL;
u32 class_rev;
u32 reg1;
+ int rc;
+
+ rc = pcim_enable_device(dev);
+ if (rc)
+ return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@@ -419,24 +383,31 @@
/* info_hpt366 is safe against re-entry so we can scribble on it */
switch((reg1 & 0x700) >> 8) {
case 5:
- info.private_data = &hpt366_40;
+ hpriv = &hpt366_40;
break;
case 9:
- info.private_data = &hpt366_25;
+ hpriv = &hpt366_25;
break;
default:
- info.private_data = &hpt366_33;
+ hpriv = &hpt366_33;
break;
}
/* Now kick off ATA set up */
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv);
}
#ifdef CONFIG_PM
static int hpt36x_reinit_one(struct pci_dev *dev)
{
+ struct ata_host *host = dev_get_drvdata(&dev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(dev);
+ if (rc)
+ return rc;
hpt36x_init_chipset(dev);
- return ata_pci_device_resume(dev);
+ ata_host_resume(host);
+ return 0;
}
#endif
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 9a10878..4216399 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -283,7 +283,7 @@
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -299,7 +299,7 @@
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -338,22 +338,10 @@
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
-/**
- * hpt37x_error_handler - reset the hpt374
- * @ap: ATA port to reset
- *
- * Perform probe for HPT37x, except for HPT374 channel 2
- */
-
-static void hpt37x_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline)
+static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline)
{
static const struct pci_bits hpt37x_enable_bits[] = {
{ 0x50, 1, 0x04, 0x04 },
@@ -386,26 +374,7 @@
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * hpt374_error_handler - reset the hpt374
- * @classes:
- *
- * The 374 cable detect is a little different due to the extra
- * channels. The function 0 channels work like usual but function 1
- * is special
- */
-
-static void hpt374_error_handler(struct ata_port *ap)
-{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- if (!(PCI_FUNC(pdev->devfn) & 1))
- hpt37x_error_handler(ap);
- else
- ata_bmdma_drive_eh(ap, hpt374_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -619,21 +588,7 @@
static struct scsi_host_template hpt37x_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
/*
@@ -641,36 +596,15 @@
*/
static struct ata_port_operations hpt370_port_ops = {
- .set_piomode = hpt370_set_piomode,
- .set_dmamode = hpt370_set_dmamode,
- .mode_filter = hpt370_filter,
+ .inherits = &ata_bmdma_port_ops,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = hpt37x_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .bmdma_setup = ata_bmdma_setup,
.bmdma_start = hpt370_bmdma_start,
.bmdma_stop = hpt370_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .mode_filter = hpt370_filter,
+ .set_piomode = hpt370_set_piomode,
+ .set_dmamode = hpt370_set_dmamode,
+ .prereset = hpt37x_pre_reset,
};
/*
@@ -678,36 +612,8 @@
*/
static struct ata_port_operations hpt370a_port_ops = {
- .set_piomode = hpt370_set_piomode,
- .set_dmamode = hpt370_set_dmamode,
+ .inherits = &hpt370_port_ops,
.mode_filter = hpt370a_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = hpt37x_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = hpt370_bmdma_start,
- .bmdma_stop = hpt370_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/*
@@ -716,74 +622,23 @@
*/
static struct ata_port_operations hpt372_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
+ .bmdma_stop = hpt37x_bmdma_stop,
+
.set_piomode = hpt372_set_piomode,
.set_dmamode = hpt372_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = hpt37x_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = hpt37x_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .prereset = hpt37x_pre_reset,
};
/*
* Configuration for HPT374. Mode setting works like 372 and friends
- * but we have a different cable detection procedure.
+ * but we have a different cable detection procedure for function 1.
*/
-static struct ata_port_operations hpt374_port_ops = {
- .set_piomode = hpt372_set_piomode,
- .set_dmamode = hpt372_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = hpt374_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = hpt37x_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+static struct ata_port_operations hpt374_fn1_port_ops = {
+ .inherits = &hpt372_port_ops,
+ .prereset = hpt374_fn1_pre_reset,
};
/**
@@ -897,7 +752,6 @@
{
/* HPT370 - UDMA100 */
static const struct ata_port_info info_hpt370 = {
- .sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -906,7 +760,6 @@
};
/* HPT370A - UDMA100 */
static const struct ata_port_info info_hpt370a = {
- .sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -915,7 +768,6 @@
};
/* HPT370 - UDMA100 */
static const struct ata_port_info info_hpt370_33 = {
- .sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -924,7 +776,6 @@
};
/* HPT370A - UDMA100 */
static const struct ata_port_info info_hpt370a_33 = {
- .sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -933,28 +784,31 @@
};
/* HPT371, 372 and friends - UDMA133 */
static const struct ata_port_info info_hpt372 = {
- .sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA6,
.port_ops = &hpt372_port_ops
};
- /* HPT374 - UDMA100 */
- static const struct ata_port_info info_hpt374 = {
- .sht = &hpt37x_sht,
+ /* HPT374 - UDMA100, function 1 uses different prereset method */
+ static const struct ata_port_info info_hpt374_fn0 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA5,
- .port_ops = &hpt374_port_ops
+ .port_ops = &hpt372_port_ops
+ };
+ static const struct ata_port_info info_hpt374_fn1 = {
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x07,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &hpt374_fn1_port_ops
};
static const int MHz[4] = { 33, 40, 50, 66 };
- const struct ata_port_info *port;
void *private_data = NULL;
- struct ata_port_info port_info;
- const struct ata_port_info *ppi[] = { &port_info, NULL };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
u8 irqmask;
u32 class_rev;
@@ -966,6 +820,11 @@
const struct hpt_chip *chip_table;
int clock_slot;
+ int rc;
+
+ rc = pcim_enable_device(dev);
+ if (rc)
+ return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@@ -981,17 +840,17 @@
switch(class_rev) {
case 3:
- port = &info_hpt370;
+ ppi[0] = &info_hpt370;
chip_table = &hpt370;
prefer_dpll = 0;
break;
case 4:
- port = &info_hpt370a;
+ ppi[0] = &info_hpt370a;
chip_table = &hpt370a;
prefer_dpll = 0;
break;
case 5:
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
chip_table = &hpt372;
break;
default:
@@ -1004,21 +863,21 @@
/* 372N if rev >= 2*/
if (class_rev >= 2)
return -ENODEV;
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
chip_table = &hpt372a;
break;
case PCI_DEVICE_ID_TTI_HPT302:
/* 302N if rev > 1 */
if (class_rev > 1)
return -ENODEV;
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
/* Check this */
chip_table = &hpt302;
break;
case PCI_DEVICE_ID_TTI_HPT371:
if (class_rev > 1)
return -ENODEV;
- port = &info_hpt372;
+ ppi[0] = &info_hpt372;
chip_table = &hpt371;
/* Single channel device, master is not present
but the BIOS (or us for non x86) must mark it
@@ -1029,7 +888,10 @@
break;
case PCI_DEVICE_ID_TTI_HPT374:
chip_table = &hpt374;
- port = &info_hpt374;
+ if (!(PCI_FUNC(dev->devfn) & 1))
+ *ppi = &info_hpt374_fn0;
+ else
+ *ppi = &info_hpt374_fn1;
break;
default:
printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device);
@@ -1108,7 +970,7 @@
int dpll, adjust;
/* Compute DPLL */
- dpll = (port->udma_mask & 0xC0) ? 3 : 2;
+ dpll = (ppi[0]->udma_mask & 0xC0) ? 3 : 2;
f_low = (MHz[clock_slot] * 48) / MHz[dpll];
f_high = f_low + 2;
@@ -1148,19 +1010,16 @@
* about lack of UDMA133 support on lower clocks
*/
- if (clock_slot < 2 && port == &info_hpt370)
- port = &info_hpt370_33;
- if (clock_slot < 2 && port == &info_hpt370a)
- port = &info_hpt370a_33;
+ if (clock_slot < 2 && ppi[0] == &info_hpt370)
+ ppi[0] = &info_hpt370_33;
+ if (clock_slot < 2 && ppi[0] == &info_hpt370a)
+ ppi[0] = &info_hpt370a_33;
printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
chip_table->name, MHz[clock_slot]);
}
/* Now kick off ATA set up */
- port_info = *port;
- port_info.private_data = private_data;
-
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data);
}
static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 9f1c084..d5c9fd7 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -148,7 +148,7 @@
* Reset the hardware and state machine,
*/
-static int hpt3xn_pre_reset(struct ata_link *link, unsigned long deadline)
+static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -156,19 +156,7 @@
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * hpt3x2n_error_handler - probe the hpt3x2n bus
- * @ap: ATA port to reset
- *
- * Perform the probe reset handling for the 3x2N
- */
-
-static void hpt3x2n_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, hpt3xn_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -320,7 +308,7 @@
return 0;
}
-static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_taskfile *tf = &qc->tf;
struct ata_port *ap = qc->ap;
@@ -335,25 +323,11 @@
hpt3x2n_set_clock(ap, 0x23);
}
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template hpt3x2n_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
/*
@@ -361,37 +335,15 @@
*/
static struct ata_port_operations hpt3x2n_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
+ .bmdma_stop = hpt3x2n_bmdma_stop,
+ .qc_issue = hpt3x2n_qc_issue,
+
+ .cable_detect = hpt3x2n_cable_detect,
.set_piomode = hpt3x2n_set_piomode,
.set_dmamode = hpt3x2n_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = hpt3x2n_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = hpt3x2n_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = hpt3x2n_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = hpt3x2n_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .prereset = hpt3x2n_pre_reset,
};
/**
@@ -488,15 +440,13 @@
{
/* HPT372N and friends - UDMA133 */
static const struct ata_port_info info = {
- .sht = &hpt3x2n_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA6,
.port_ops = &hpt3x2n_port_ops
};
- struct ata_port_info port = info;
- const struct ata_port_info *ppi[] = { &port, NULL };
+ const struct ata_port_info *ppi[] = { &info, NULL };
u8 irqmask;
u32 class_rev;
@@ -505,6 +455,12 @@
unsigned int f_low, f_high;
int adjust;
unsigned long iobase = pci_resource_start(dev, 4);
+ void *hpriv = NULL;
+ int rc;
+
+ rc = pcim_enable_device(dev);
+ if (rc)
+ return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@@ -586,9 +542,8 @@
pci_mhz);
/* Set our private data up. We only need a few flags so we use
it directly */
- port.private_data = NULL;
if (pci_mhz > 60) {
- port.private_data = (void *)PCI66;
+ hpriv = (void *)PCI66;
/*
* On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
* the MISC. register to stretch the UltraDMA Tss timing.
@@ -599,7 +554,7 @@
}
/* Now kick off ATA set up */
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv);
}
static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index cb8bdb6..f11a320 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -102,58 +102,17 @@
}
static struct scsi_host_template hpt3x3_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations hpt3x3_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .check_atapi_dma= hpt3x3_atapi_dma,
+ .cable_detect = ata_cable_40wire,
.set_piomode = hpt3x3_set_piomode,
#if defined(CONFIG_PATA_HPT3X3_DMA)
.set_dmamode = hpt3x3_set_dmamode,
#endif
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .check_atapi_dma= hpt3x3_atapi_dma,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/**
@@ -189,7 +148,6 @@
{
static int printed_version;
static const struct ata_port_info info = {
- .sht = &hpt3x3_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
#if defined(CONFIG_PATA_HPT3X3_DMA)
@@ -244,15 +202,15 @@
ioaddr->altstatus_addr =
ioaddr->ctl_addr = base + offset_ctl[i];
ioaddr->scr_addr = NULL;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ioaddr->bmdma_addr = base + 8 * i;
ata_port_pbar_desc(ap, 4, -1, "ioport");
ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd");
}
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &hpt3x3_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &hpt3x3_sht);
}
#ifdef CONFIG_PM
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index f97068b..1713843 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -250,7 +250,7 @@
set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ);
/* issue r/w command */
- ap->ops->exec_command(ap, &qc->tf);
+ ap->ops->sff_exec_command(ap, &qc->tf);
}
static void pata_icside_bmdma_start(struct ata_queued_cmd *qc)
@@ -270,7 +270,7 @@
disable_dma(state->dma);
/* see ata_bmdma_stop */
- ata_altstatus(ap);
+ ata_sff_altstatus(ap);
}
static u8 pata_icside_bmdma_status(struct ata_port *ap)
@@ -305,35 +305,18 @@
static struct scsi_host_template pata_icside_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = PATA_ICSIDE_MAX_SG,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = ~0, /* no dma boundaries */
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
-/* wish this was exported from libata-core */
-static void ata_dummy_noret(struct ata_port *port)
-{
-}
-
static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
{
struct ata_port *ap = link->ap;
struct pata_icside_state *state = ap->host->private_data;
if (classes[0] != ATA_DEV_NONE || classes[1] != ATA_DEV_NONE)
- return ata_std_postreset(link, classes);
+ return ata_sff_postreset(link, classes);
state->port[ap->port_no].disabled = 1;
@@ -349,42 +332,20 @@
}
}
-static void pata_icside_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
- pata_icside_postreset);
-}
-
static struct ata_port_operations pata_icside_port_ops = {
- .set_dmamode = pata_icside_set_dmamode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
-
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = pata_icside_bmdma_setup,
- .bmdma_start = pata_icside_bmdma_start,
-
- .data_xfer = ata_data_xfer_noirq,
-
+ .inherits = &ata_sff_port_ops,
/* no need to build any PRD tables for DMA */
.qc_prep = ata_noop_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = pata_icside_error_handler,
- .post_internal_cmd = pata_icside_bmdma_stop,
-
- .irq_clear = ata_dummy_noret,
- .irq_on = ata_irq_on,
-
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
+ .bmdma_setup = pata_icside_bmdma_setup,
+ .bmdma_start = pata_icside_bmdma_start,
.bmdma_stop = pata_icside_bmdma_stop,
.bmdma_status = pata_icside_bmdma_status,
+
+ .cable_detect = ata_cable_40wire,
+ .set_dmamode = pata_icside_set_dmamode,
+ .postreset = pata_icside_postreset,
+ .post_internal_cmd = pata_icside_bmdma_stop,
};
static void __devinit
@@ -520,7 +481,7 @@
pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]);
}
- return ata_host_activate(host, ec->irq, ata_interrupt, 0,
+ return ata_host_activate(host, ec->irq, ata_sff_interrupt, 0,
&pata_icside_sht);
}
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 4320e79..6a111ba 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -20,45 +20,12 @@
#define DRV_VERSION "0.2.2"
static struct scsi_host_template isapnp_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations isapnp_port_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/**
@@ -83,7 +50,7 @@
if (pnp_irq_valid(idev, 0)) {
irq = pnp_irq(idev, 0);
- handler = ata_interrupt;
+ handler = ata_sff_interrupt;
}
/* allocate host */
@@ -111,7 +78,7 @@
ap->ioaddr.ctl_addr = ctl_addr;
}
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
(unsigned long long)pnp_port_start(idev, 0),
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index e0c2cc2..c113d7c 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -40,20 +40,7 @@
if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * it8213_error_handler - Probe specified port on PATA host controller
- * @ap: Port to probe
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void it8213_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, it8213_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -243,53 +230,16 @@
}
static struct scsi_host_template it8213_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations it8213_ops = {
+
+static struct ata_port_operations it8213_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = it8213_cable_detect,
.set_piomode = it8213_set_piomode,
.set_dmamode = it8213_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = it8213_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = it8213_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .prereset = it8213_pre_reset,
};
@@ -311,7 +261,6 @@
{
static int printed_version;
static const struct ata_port_info info = {
- .sht = &it8213_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -325,7 +274,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL);
}
static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 257951d..e108169 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -395,11 +395,11 @@
it821x_program(ap, adev, itdev->pio[adev->devno]);
itdev->last_device = device;
}
- ata_std_dev_select(ap, device);
+ ata_sff_dev_select(ap, device);
}
/**
- * it821x_smart_qc_issue_prot - wrap qc issue prot
+ * it821x_smart_qc_issue - wrap qc issue prot
* @qc: command
*
* Wrap the command issue sequence for the IT821x. We need to
@@ -407,7 +407,7 @@
* usual happenings kick off
*/
-static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
{
switch(qc->tf.command)
{
@@ -427,14 +427,14 @@
case ATA_CMD_ID_ATA:
/* Arguably should just no-op this one */
case ATA_CMD_SET_FEATURES:
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command);
return AC_ERR_DEV;
}
/**
- * it821x_passthru_qc_issue_prot - wrap qc issue prot
+ * it821x_passthru_qc_issue - wrap qc issue prot
* @qc: command
*
* Wrap the command issue sequence for the IT821x. We need to
@@ -442,10 +442,10 @@
* usual happenings kick off
*/
-static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int it821x_passthru_qc_issue(struct ata_queued_cmd *qc)
{
it821x_passthru_dev_select(qc->ap, qc->dev->devno);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
/**
@@ -632,89 +632,34 @@
}
static struct scsi_host_template it821x_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations it821x_smart_port_ops = {
- .set_mode = it821x_smart_set_mode,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .mode_filter = ata_pci_default_filter,
+ .inherits = &ata_bmdma_port_ops,
- .check_status = ata_check_status,
.check_atapi_dma= it821x_check_atapi_dma,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
- .dev_config = it821x_dev_config,
+ .qc_issue = it821x_smart_qc_issue,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = it821x_ident_hack,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = it821x_smart_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
+ .set_mode = it821x_smart_set_mode,
+ .dev_config = it821x_dev_config,
.port_start = it821x_port_start,
};
static struct ata_port_operations it821x_passthru_port_ops = {
- .set_piomode = it821x_passthru_set_piomode,
- .set_dmamode = it821x_passthru_set_dmamode,
- .mode_filter = ata_pci_default_filter,
+ .inherits = &ata_bmdma_port_ops,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
.check_atapi_dma= it821x_check_atapi_dma,
- .dev_select = it821x_passthru_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_unknown,
-
- .bmdma_setup = ata_bmdma_setup,
+ .sff_dev_select = it821x_passthru_dev_select,
.bmdma_start = it821x_passthru_bmdma_start,
.bmdma_stop = it821x_passthru_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
+ .qc_issue = it821x_passthru_qc_issue,
- .qc_prep = ata_qc_prep,
- .qc_issue = it821x_passthru_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_handler = ata_interrupt,
- .irq_on = ata_irq_on,
+ .cable_detect = ata_cable_unknown,
+ .set_piomode = it821x_passthru_set_piomode,
+ .set_dmamode = it821x_passthru_set_dmamode,
.port_start = it821x_port_start,
};
@@ -742,14 +687,12 @@
u8 conf;
static const struct ata_port_info info_smart = {
- .sht = &it821x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &it821x_smart_port_ops
};
static const struct ata_port_info info_passthru = {
- .sht = &it821x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -759,6 +702,11 @@
const struct ata_port_info *ppi[] = { NULL, NULL };
static char *mode[2] = { "pass through", "smart" };
+ int rc;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
/* Force the card into bypass mode if so requested */
if (it8212_noraid) {
@@ -774,16 +722,23 @@
else
ppi[0] = &info_smart;
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
}
#ifdef CONFIG_PM
static int it821x_reinit_one(struct pci_dev *pdev)
{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
/* Resume - turn raid back off if need be */
if (it8212_noraid)
it821x_disable_raid(pdev);
- return ata_pci_device_resume(pdev);
+ ata_host_resume(host);
+ return rc;
}
#endif
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 030878f..8a175f2 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -88,48 +88,14 @@
}
static struct scsi_host_template ixp4xx_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations ixp4xx_port_ops = {
- .set_mode = ixp4xx_set_mode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ixp4xx_mmio_data_xfer,
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ixp4xx_mmio_data_xfer,
.cable_detect = ata_cable_40wire,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
+ .set_mode = ixp4xx_set_mode,
};
static void ixp4xx_setup_port(struct ata_port *ap,
@@ -144,7 +110,7 @@
ioaddr->altstatus_addr = data->cs1 + 0x06;
ioaddr->ctl_addr = data->cs1 + 0x06;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
#ifndef __ARMEB__
@@ -220,7 +186,7 @@
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
/* activate host */
- return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht);
+ return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);
}
static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 00bbbbd..73b7596 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -102,73 +102,18 @@
ap->cbl = ATA_CBL_SATA;
break;
}
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * jmicron_error_handler - Setup and error handler
- * @ap: Port to handle
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void jmicron_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, jmicron_pre_reset, ata_std_softreset, NULL,
- ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/* No PIO or DMA methods needed for this device */
static struct scsi_host_template jmicron_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- /* Use standard CHS mapping rules */
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations jmicron_ops = {
- /* Task file is PCI ATA format, use helpers */
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = jmicron_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- /* BMDMA handling is PCI ATA format, use helpers */
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- /* IRQ-related hooks */
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- /* Generic PATA PCI ATA helpers */
- .port_start = ata_port_start,
+static struct ata_port_operations jmicron_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .prereset = jmicron_pre_reset,
};
@@ -189,7 +134,6 @@
static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &jmicron_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
@@ -200,7 +144,7 @@
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL);
}
static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 50fe08e..7af4b29 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -208,21 +208,12 @@
}
static struct scsi_host_template legacy_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static const struct ata_port_operations legacy_base_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .cable_detect = ata_cable_40wire,
};
/*
@@ -234,55 +225,14 @@
*/
static struct ata_port_operations simple_port_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer_noirq,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .inherits = &legacy_base_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
};
static struct ata_port_operations legacy_port_ops = {
+ .inherits = &legacy_base_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
.set_mode = legacy_set_mode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
- .cable_detect = ata_cable_40wire,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer_noirq,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/*
@@ -367,36 +317,15 @@
}
local_irq_restore(flags);
} else
- buflen = ata_data_xfer_noirq(dev, buf, buflen, rw);
+ buflen = ata_sff_data_xfer_noirq(dev, buf, buflen, rw);
return buflen;
}
static struct ata_port_operations pdc20230_port_ops = {
+ .inherits = &legacy_base_port_ops,
.set_piomode = pdc20230_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = pdc_data_xfer_vlb,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .sff_data_xfer = pdc_data_xfer_vlb,
};
/*
@@ -427,30 +356,8 @@
}
static struct ata_port_operations ht6560a_port_ops = {
+ .inherits = &legacy_base_port_ops,
.set_piomode = ht6560a_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer, /* Check vlb/noirq */
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/*
@@ -492,30 +399,8 @@
}
static struct ata_port_operations ht6560b_port_ops = {
+ .inherits = &legacy_base_port_ops,
.set_piomode = ht6560b_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/*
@@ -613,30 +498,8 @@
static struct ata_port_operations opti82c611a_port_ops = {
+ .inherits = &legacy_base_port_ops,
.set_piomode = opti82c611a_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/*
@@ -716,7 +579,7 @@
}
/**
- * opt82c465mv_qc_issue_prot - command issue
+ * opt82c465mv_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -730,7 +593,7 @@
* FIXME: dual channel needs ->serialize support
*/
-static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int opti82c46x_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -741,34 +604,13 @@
&& ap->host->private_data != NULL)
opti82c46x_set_piomode(ap, adev);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct ata_port_operations opti82c46x_port_ops = {
+ .inherits = &legacy_base_port_ops,
.set_piomode = opti82c46x_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = opti82c46x_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .qc_issue = opti82c46x_qc_issue,
};
static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -802,7 +644,7 @@
* @irq: interrupt line
*
* In dual channel mode the 6580 has one clock per channel and we have
- * to software clockswitch in qc_issue_prot.
+ * to software clockswitch in qc_issue.
*/
static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -868,14 +710,14 @@
}
/**
- * qdi_qc_issue_prot - command issue
+ * qdi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings.
*/
-static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -888,7 +730,7 @@
2 * ap->port_no);
}
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
@@ -917,7 +759,7 @@
}
return (buflen + 3) & ~3;
} else
- return ata_data_xfer(adev, buf, buflen, rw);
+ return ata_sff_data_xfer(adev, buf, buflen, rw);
}
static int qdi_port(struct platform_device *dev,
@@ -930,84 +772,22 @@
}
static struct ata_port_operations qdi6500_port_ops = {
+ .inherits = &legacy_base_port_ops,
.set_piomode = qdi6500_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = qdi_qc_issue_prot,
-
- .data_xfer = vlb32_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .qc_issue = qdi_qc_issue,
+ .sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580_port_ops = {
+ .inherits = &legacy_base_port_ops,
.set_piomode = qdi6580_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = vlb32_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580dp_port_ops = {
+ .inherits = &legacy_base_port_ops,
.set_piomode = qdi6580dp_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = qdi_qc_issue_prot,
-
- .data_xfer = vlb32_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .sff_data_xfer = vlb32_data_xfer,
};
static DEFINE_SPINLOCK(winbond_lock);
@@ -1076,29 +856,9 @@
}
static struct ata_port_operations winbond_port_ops = {
+ .inherits = &legacy_base_port_ops,
.set_piomode = winbond_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = vlb32_data_xfer,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .sff_data_xfer = vlb32_data_xfer,
};
static struct legacy_controller controllers[] = {
@@ -1256,13 +1016,13 @@
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctrl_addr;
ap->ioaddr.ctl_addr = ctrl_addr;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ap->host->private_data = ld;
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
- ret = ata_host_activate(host, probe->irq, ata_interrupt, 0,
- &legacy_sht);
+ ret = ata_host_activate(host, probe->irq, ata_sff_interrupt, 0,
+ &legacy_sht);
if (ret)
goto fail;
ld->platform_dev = pdev;
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index a81f25d..24a011b 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -55,7 +55,7 @@
(!(devices & 0x10))) /* PATA enable ? */
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
static int marvell_cable_detect(struct ata_port *ap)
@@ -75,71 +75,16 @@
return 0; /* Our BUG macro needs the right markup */
}
-/**
- * marvell_error_handler - Setup and error handler
- * @ap: Port to handle
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void marvell_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, marvell_pre_reset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
/* No PIO or DMA methods needed for this device */
static struct scsi_host_template marvell_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- /* Use standard CHS mapping rules */
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations marvell_ops = {
- /* Task file is PCI ATA format, use helpers */
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = marvell_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+static struct ata_port_operations marvell_ops = {
+ .inherits = &ata_bmdma_port_ops,
.cable_detect = marvell_cable_detect,
-
- /* BMDMA handling is PCI ATA format, use helpers */
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- /* Timeout handling */
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- /* Generic PATA PCI ATA helpers */
- .port_start = ata_sff_port_start,
+ .prereset = marvell_pre_reset,
};
@@ -160,7 +105,6 @@
static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &marvell_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
@@ -170,7 +114,6 @@
.port_ops = &marvell_ops,
};
static const struct ata_port_info info_sata = {
- .sht = &marvell_sht,
/* Slave possible as its magically mapped not real */
.flags = ATA_FLAG_SLAVE_POSS,
@@ -185,7 +128,7 @@
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
}
static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 5413ebf..bc79df6 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -252,53 +252,19 @@
if (device != priv->csel)
mpc52xx_ata_apply_timings(priv, device);
- ata_std_dev_select(ap,device);
+ ata_sff_dev_select(ap,device);
}
-static void
-mpc52xx_ata_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
-
-
static struct scsi_host_template mpc52xx_ata_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations mpc52xx_ata_port_ops = {
- .set_piomode = mpc52xx_ata_set_piomode,
- .dev_select = mpc52xx_ata_dev_select,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = mpc52xx_ata_error_handler,
+ .inherits = &ata_sff_port_ops,
+ .sff_dev_select = mpc52xx_ata_dev_select,
.cable_detect = ata_cable_40wire,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .port_start = ata_port_start,
+ .set_piomode = mpc52xx_ata_set_piomode,
+ .post_internal_cmd = ATA_OP_NULL,
};
static int __devinit
@@ -339,7 +305,7 @@
ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs);
/* activate host */
- return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0,
+ return ata_host_activate(host, priv->ata_irq, ata_sff_interrupt, 0,
&mpc52xx_ata_sht);
}
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index c0d9e0c..7d7e3fd 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -55,21 +55,7 @@
if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * mpiix_error_handler - probe reset
- * @ap: ATA port
- *
- * Perform the ATA probe and bus reset sequence plus specific handling
- * for this hardware. The MPIIX has the enable bits in a different place
- * to PIIX4 and friends. As a pure PIO device it has no cable detect
- */
-
-static void mpiix_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, mpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -83,8 +69,8 @@
*
* This would get very ugly because we can only program timing for one
* device at a time, the other gets PIO0. Fortunately libata calls
- * our qc_issue_prot command before a command is issued so we can
- * flip the timings back and forth to reduce the pain.
+ * our qc_issue command before a command is issued so we can flip the
+ * timings back and forth to reduce the pain.
*/
static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
@@ -124,7 +110,7 @@
}
/**
- * mpiix_qc_issue_prot - command issue
+ * mpiix_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -134,7 +120,7 @@
* be made PIO0.
*/
-static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int mpiix_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -147,50 +133,19 @@
if (adev->pio_mode && adev != ap->private_data)
mpiix_set_piomode(ap, adev);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template mpiix_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations mpiix_port_ops = {
- .set_piomode = mpiix_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = mpiix_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
+ .qc_issue = mpiix_qc_issue,
.cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = mpiix_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_piomode = mpiix_set_piomode,
+ .prereset = mpiix_pre_reset,
};
static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
@@ -252,10 +207,10 @@
ap->ioaddr.altstatus_addr = ctl_addr;
/* Let libata fill in the port details */
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
/* activate host */
- return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED,
+ return ata_host_activate(host, irq, ata_sff_interrupt, IRQF_SHARED,
&mpiix_sht);
}
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 25c922a..d9719c8 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -21,54 +21,12 @@
/* No PIO or DMA methods needed for this device */
static struct scsi_host_template netcell_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- /* Use standard CHS mapping rules */
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations netcell_ops = {
- /* Task file is PCI ATA format, use helpers */
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+static struct ata_port_operations netcell_ops = {
+ .inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_80wire,
-
- /* BMDMA handling is PCI ATA format, use helpers */
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- /* IRQ-related hooks */
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- /* Generic PATA PCI ATA helpers */
- .port_start = ata_sff_port_start,
};
@@ -90,7 +48,6 @@
{
static int printed_version;
static const struct ata_port_info info = {
- .sht = &netcell_sht,
.flags = ATA_FLAG_SLAVE_POSS,
/* Actually we don't really care about these as the
firmware deals with it */
@@ -100,16 +57,21 @@
.port_ops = &netcell_ops,
};
const struct ata_port_info *port_info[] = { &info, NULL };
+ int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
/* Any chip specific setup/optimisation/messages here */
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
/* And let the library code do the work */
- return ata_pci_init_one(pdev, port_info);
+ return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL);
}
static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 15dd649..565e67c 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -73,60 +73,20 @@
struct ata_device *adev = &ap->link.device[device];
if (ap->private_data != adev) {
iowrite8(0xd6, ap->ioaddr.bmdma_addr + 0x1f);
- ata_std_dev_select(ap, device);
+ ata_sff_dev_select(ap, device);
ninja32_set_piomode(ap, adev);
}
}
static struct scsi_host_template ninja32_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations ninja32_port_ops = {
- .set_piomode = ninja32_set_piomode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ninja32_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_bmdma_port_ops,
+ .sff_dev_select = ninja32_dev_select,
.cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_piomode = ninja32_set_piomode,
};
static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
@@ -172,7 +132,7 @@
ap->ioaddr.ctl_addr = base + 0x1E;
ap->ioaddr.altstatus_addr = base + 0x1E;
ap->ioaddr.bmdma_addr = base;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
iowrite8(0x05, base + 0x01); /* Enable interrupt lines */
iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */
@@ -182,7 +142,7 @@
iowrite8(0xa4, base + 0x1c); /* Unknown */
iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */
/* FIXME: Should we disable them at remove ? */
- return ata_host_activate(host, dev->irq, ata_interrupt,
+ return ata_host_activate(host, dev->irq, ata_sff_interrupt,
IRQF_SHARED, &ninja32_sht);
}
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 9fe66fd..76d2455 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -50,21 +50,7 @@
if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * ns87410_error_handler - probe reset
- * @ap: ATA port
- *
- * Perform the ATA probe and bus reset sequence plus specific handling
- * for this hardware. The MPIIX has the enable bits in a different place
- * to PIIX4 and friends. As a pure PIO device it has no cable detect
- */
-
-static void ns87410_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ns87410_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -119,7 +105,7 @@
}
/**
- * ns87410_qc_issue_prot - command issue
+ * ns87410_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -127,7 +113,7 @@
* necessary.
*/
-static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int ns87410_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -140,64 +126,30 @@
if (adev->pio_mode && adev != ap->private_data)
ns87410_set_piomode(ap, adev);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template ns87410_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations ns87410_port_ops = {
- .set_piomode = ns87410_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ns87410_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
+ .qc_issue = ns87410_qc_issue,
.cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ns87410_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_piomode = ns87410_set_piomode,
+ .prereset = ns87410_pre_reset,
};
static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &ns87410_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x0F,
.port_ops = &ns87410_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL);
}
static const struct pci_device_id ns87410[] = {
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index d0e2e50..ae92b00 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -138,7 +138,7 @@
dmactl |= ATA_DMA_WR;
iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
/* issue r/w command */
- ap->ops->exec_command(ap, &qc->tf);
+ ap->ops->sff_exec_command(ap, &qc->tf);
}
/**
@@ -172,14 +172,14 @@
}
/**
- * ns87415_bmdma_irq_clear - Clear interrupt
+ * ns87415_irq_clear - Clear interrupt
* @ap: Channel to clear
*
* Erratum: Due to a chip bug regisers 02 and 0A bit 1 and 2 (the
* error bits) are reset by writing to register 00 or 08.
*/
-static void ns87415_bmdma_irq_clear(struct ata_port *ap)
+static void ns87415_irq_clear(struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.bmdma_addr;
@@ -297,90 +297,32 @@
{
return ns87560_read_buggy(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
}
-
-static const struct ata_port_operations ns87560_pata_ops = {
- .set_piomode = ns87415_set_piomode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ns87560_tf_read,
- .check_status = ns87560_check_status,
- .check_atapi_dma = ns87415_check_atapi_dma,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ns87415_bmdma_setup,
- .bmdma_start = ns87415_bmdma_start,
- .bmdma_stop = ns87415_bmdma_stop,
- .bmdma_status = ns87560_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ns87415_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
-};
-
#endif /* 87560 SuperIO Support */
+static struct ata_port_operations ns87415_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
-static const struct ata_port_operations ns87415_pata_ops = {
- .set_piomode = ns87415_set_piomode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
.check_atapi_dma = ns87415_check_atapi_dma,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
.bmdma_setup = ns87415_bmdma_setup,
.bmdma_start = ns87415_bmdma_start,
.bmdma_stop = ns87415_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
+ .sff_irq_clear = ns87415_irq_clear,
- .irq_handler = ata_interrupt,
- .irq_clear = ns87415_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = ns87415_set_piomode,
};
+#if defined(CONFIG_SUPERIO)
+static struct ata_port_operations ns87560_pata_ops = {
+ .inherits = &ns87415_pata_ops,
+ .sff_tf_read = ns87560_tf_read,
+ .sff_check_status = ns87560_check_status,
+ .bmdma_status = ns87560_bmdma_status,
+};
+#endif
+
static struct scsi_host_template ns87415_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
@@ -403,16 +345,15 @@
{
static int printed_version;
static const struct ata_port_info info = {
- .sht = &ns87415_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.port_ops = &ns87415_pata_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
+ int rc;
#if defined(CONFIG_SUPERIO)
static const struct ata_port_info info87560 = {
- .sht = &ns87415_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@@ -425,11 +366,16 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
/* Select 512 byte sectors */
pci_write_config_byte(pdev, 0x55, 0xEE);
/* Select PIO0 8bit clocking */
pci_write_config_byte(pdev, 0x54, 0xB7);
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL);
}
static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 44da09a..e678af3 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -47,21 +47,7 @@
if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * oldpiix_pata_error_handler - Probe specified port on PATA host controller
- * @ap: Port to probe
- * @classes:
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void oldpiix_pata_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, oldpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -195,7 +181,7 @@
}
/**
- * oldpiix_qc_issue_prot - command issue
+ * oldpiix_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -205,7 +191,7 @@
* be made PIO0.
*/
-static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int oldpiix_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -215,58 +201,21 @@
if (adev->dma_mode)
oldpiix_set_dmamode(ap, adev);
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template oldpiix_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations oldpiix_pata_ops = {
+static struct ata_port_operations oldpiix_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .qc_issue = oldpiix_qc_issue,
+ .cable_detect = ata_cable_40wire,
.set_piomode = oldpiix_set_piomode,
.set_dmamode = oldpiix_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = oldpiix_pata_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = oldpiix_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .prereset = oldpiix_pre_reset,
};
@@ -289,7 +238,6 @@
{
static int printed_version;
static const struct ata_port_info info = {
- .sht = &oldpiix_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma1-2 */
@@ -301,7 +249,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL);
}
static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 8f79447..fb2cf66 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -64,22 +64,7 @@
if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * opti_probe_reset - probe reset
- * @ap: ATA port
- *
- * Perform the ATA probe and bus reset sequence plus specific handling
- * for this hardware. The Opti needs little handling - we have no UDMA66
- * capability that needs cable detection. All we must do is check the port
- * is enabled.
- */
-
-static void opti_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, opti_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -165,58 +150,19 @@
}
static struct scsi_host_template opti_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations opti_port_ops = {
- .set_piomode = opti_set_piomode,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = opti_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_piomode = opti_set_piomode,
+ .prereset = opti_pre_reset,
};
static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &opti_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &opti_port_ops
@@ -227,7 +173,7 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL);
}
static const struct pci_device_id opti[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index f9b485a..4cd7444 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -64,22 +64,7 @@
if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * optidma_probe_reset - probe reset
- * @ap: ATA port
- *
- * Perform the ATA probe and bus reset sequence plus specific handling
- * for this hardware. The Opti needs little handling - we have no UDMA66
- * capability that needs cable detection. All we must do is check the port
- * is enabled.
- */
-
-static void optidma_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, optidma_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -350,89 +335,22 @@
}
static struct scsi_host_template optidma_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations optidma_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = ata_cable_40wire,
.set_piomode = optidma_set_pio_mode,
.set_dmamode = optidma_set_dma_mode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .error_handler = optidma_error_handler,
.set_mode = optidma_set_mode,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .prereset = optidma_pre_reset,
};
static struct ata_port_operations optiplus_port_ops = {
+ .inherits = &optidma_port_ops,
.set_piomode = optiplus_set_pio_mode,
.set_dmamode = optiplus_set_dma_mode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .error_handler = optidma_error_handler,
- .set_mode = optidma_set_mode,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/**
@@ -481,14 +399,12 @@
static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info_82c700 = {
- .sht = &optidma_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &optidma_port_ops
};
static const struct ata_port_info info_82c700_udma = {
- .sht = &optidma_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -497,10 +413,15 @@
};
const struct ata_port_info *ppi[] = { &info_82c700, NULL };
static int printed_version;
+ int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
+ rc = pcim_enable_device(dev);
+ if (rc)
+ return rc;
+
/* Fixed location chipset magic */
inw(0x1F1);
inw(0x1F1);
@@ -509,7 +430,7 @@
if (optiplus_with_udma(dev))
ppi[0] = &info_82c700_udma;
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL);
}
static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 3e7f6a9..3d39f9d 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -128,71 +128,21 @@
static struct scsi_host_template pcmcia_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations pcmcia_port_ops = {
- .set_mode = pcmcia_set_mode,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer_noirq,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_mode = pcmcia_set_mode,
};
static struct ata_port_operations pcmcia_8bit_port_ops = {
- .set_mode = pcmcia_set_mode_8bit,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ata_data_xfer_8bit,
.cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer_8bit,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_mode = pcmcia_set_mode_8bit,
};
#define CS_CHECK(fn, ret) \
@@ -373,13 +323,13 @@
ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
}
/* activate */
- ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
+ ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
IRQF_SHARED, &pcmcia_sht);
if (ret)
goto failed;
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 511c89b..0e1c2c1 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -63,7 +63,7 @@
};
static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc2027x_error_handler(struct ata_port *ap);
+static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
@@ -129,84 +129,22 @@
};
static struct scsi_host_template pdc2027x_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations pdc2027x_pata100_ops = {
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
+ .inherits = &ata_bmdma_port_ops,
.check_atapi_dma = pdc2027x_check_atapi_dma,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = pdc2027x_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = pdc2027x_cable_detect,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .prereset = pdc2027x_prereset,
};
static struct ata_port_operations pdc2027x_pata133_ops = {
+ .inherits = &pdc2027x_pata100_ops,
+ .mode_filter = pdc2027x_mode_filter,
.set_piomode = pdc2027x_set_piomode,
.set_dmamode = pdc2027x_set_dmamode,
.set_mode = pdc2027x_set_mode,
- .mode_filter = pdc2027x_mode_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .check_atapi_dma = pdc2027x_check_atapi_dma,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = pdc2027x_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = pdc2027x_cable_detect,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
static struct ata_port_info pdc2027x_port_info[] = {
@@ -310,22 +248,7 @@
/* Check whether port enabled */
if (!pdc2027x_port_enabled(link->ap))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-/**
- * pdc2027x_error_handler - Perform reset on PATA port and classify
- * @ap: Port to reset
- *
- * Reset PATA phy and classify attached devices.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void pdc2027x_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, pdc2027x_prereset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -342,7 +265,7 @@
struct ata_device *pair = ata_dev_pair(adev);
if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
/* Check for slave of a Maxtor at UDMA6 */
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
@@ -351,7 +274,7 @@
if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -836,8 +759,8 @@
return -EIO;
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &pdc2027x_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &pdc2027x_sht);
}
/**
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 3ed8667..d267306 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -262,94 +262,34 @@
}
static struct scsi_host_template pdc202xx_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations pdc2024x_port_ops = {
- .set_piomode = pdc202xx_set_piomode,
- .set_dmamode = pdc202xx_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
+ .inherits = &ata_bmdma_port_ops,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = pdc202xx_set_piomode,
+ .set_dmamode = pdc202xx_set_dmamode,
};
static struct ata_port_operations pdc2026x_port_ops = {
- .set_piomode = pdc202xx_set_piomode,
- .set_dmamode = pdc202xx_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
- .dev_config = pdc2026x_dev_config,
+ .inherits = &pdc2024x_port_ops,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = pdc2026x_cable_detect,
+ .check_atapi_dma = pdc2026x_check_atapi_dma,
+ .bmdma_start = pdc2026x_bmdma_start,
+ .bmdma_stop = pdc2026x_bmdma_stop,
- .check_atapi_dma= pdc2026x_check_atapi_dma,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = pdc2026x_bmdma_start,
- .bmdma_stop = pdc2026x_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
+ .cable_detect = pdc2026x_cable_detect,
+ .dev_config = pdc2026x_dev_config,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = pdc2026x_port_start,
+ .port_start = pdc2026x_port_start,
};
static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info[3] = {
{
- .sht = &pdc202xx_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -357,7 +297,6 @@
.port_ops = &pdc2024x_port_ops
},
{
- .sht = &pdc202xx_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -365,7 +304,6 @@
.port_ops = &pdc2026x_port_ops
},
{
- .sht = &pdc202xx_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -386,7 +324,7 @@
return -ENODEV;
}
}
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL);
}
static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index aad7adc..6527c56 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -46,50 +46,16 @@
return 0;
}
-static int ata_dummy_ret0(struct ata_port *ap) { return 0; }
-
static struct scsi_host_template pata_platform_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations pata_platform_port_ops = {
- .set_mode = pata_platform_set_mode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_unknown,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer_noirq,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_dummy_ret0,
+ .set_mode = pata_platform_set_mode,
+ .port_start = ATA_OP_NULL,
};
static void pata_platform_setup_port(struct ata_ioports *ioaddr,
@@ -210,7 +176,7 @@
(unsigned long long)ctl_res->start);
/* activate */
- return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
+ return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
irq_flags, &pata_platform_sht);
}
EXPORT_SYMBOL_GPL(__pata_platform_probe);
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 9f308ed..bf45cf0 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -102,14 +102,14 @@
}
/**
- * qdi_qc_issue_prot - command issue
+ * qdi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings.
*/
-static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -121,7 +121,7 @@
outb(qdi->clock[adev->devno], qdi->timing);
}
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
@@ -148,79 +148,26 @@
buflen += 4 - slop;
}
} else
- buflen = ata_data_xfer(dev, buf, buflen, rw);
+ buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
return buflen;
}
static struct scsi_host_template qdi_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations qdi6500_port_ops = {
- .set_piomode = qdi6500_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
+ .qc_issue = qdi_qc_issue,
+ .sff_data_xfer = qdi_data_xfer,
.cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = qdi_qc_issue_prot,
-
- .data_xfer = qdi_data_xfer,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_piomode = qdi6500_set_piomode,
};
static struct ata_port_operations qdi6580_port_ops = {
+ .inherits = &qdi6500_port_ops,
.set_piomode = qdi6580_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = qdi_qc_issue_prot,
-
- .data_xfer = qdi_data_xfer,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/**
@@ -276,7 +223,7 @@
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctl_addr;
ap->ioaddr.ctl_addr = ctl_addr;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl);
@@ -292,7 +239,7 @@
printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
/* activate */
- ret = ata_host_activate(host, irq, ata_interrupt, 0, &qdi_sht);
+ ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, &qdi_sht);
if (ret)
goto fail;
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 8109b08..1c0d9fa 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -156,7 +156,7 @@
}
/**
- * radisys_qc_issue_prot - command issue
+ * radisys_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -166,7 +166,7 @@
* be made PIO0.
*/
-static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int radisys_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -180,58 +180,20 @@
radisys_set_piomode(ap, adev);
}
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template radisys_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations radisys_pata_ops = {
+static struct ata_port_operations radisys_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .qc_issue = radisys_qc_issue,
+ .cable_detect = ata_cable_unknown,
.set_piomode = radisys_set_piomode,
.set_dmamode = radisys_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_unknown,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = radisys_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
@@ -254,7 +216,6 @@
{
static int printed_version;
static const struct ata_port_info info = {
- .sht = &radisys_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma1-2 */
@@ -267,7 +228,7 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL);
}
static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rb500_cf.c b/drivers/ata/pata_rb500_cf.c
index 4ce9b03f..800ae46 100644
--- a/drivers/ata/pata_rb500_cf.c
+++ b/drivers/ata/pata_rb500_cf.c
@@ -57,7 +57,7 @@
struct ata_host *ah = ap->host;
struct rb500_cf_info *info = ah->private_data;
- ata_altstatus(ap);
+ ata_sff_altstatus(ap);
ndelay(RB500_CF_IO_DELAY);
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
@@ -109,7 +109,7 @@
if (gpio_get_value(info->gpio_line)) {
set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
if (!info->frozen)
- ata_interrupt(info->irq, dev_instance);
+ ata_sff_interrupt(info->irq, dev_instance);
} else {
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
}
@@ -117,58 +117,18 @@
return IRQ_HANDLED;
}
-static void rb500_pata_irq_clear(struct ata_port *ap)
-{
-}
-
-static int rb500_pata_port_start(struct ata_port *ap)
-{
- return 0;
-}
-
static struct ata_port_operations rb500_pata_port_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
-
- .exec_command = rb500_pata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
-
- .data_xfer = rb500_pata_data_xfer,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
+ .inherits = &ata_sff_port_ops,
+ .sff_exec_command = rb500_pata_exec_command,
+ .sff_data_xfer = rb500_pata_data_xfer,
.freeze = rb500_pata_freeze,
.thaw = rb500_pata_thaw,
- .error_handler = ata_bmdma_error_handler,
-
- .irq_handler = rb500_pata_irq_handler,
- .irq_clear = rb500_pata_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = rb500_pata_port_start,
};
/* ------------------------------------------------------------------------ */
static struct scsi_host_template rb500_pata_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
- .proc_name = DRV_NAME,
-
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
+ ATA_PIO_SHT(DRV_NAME),
};
/* ------------------------------------------------------------------------ */
@@ -188,7 +148,7 @@
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
}
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index ba8a31c..7dfd1f3 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -53,53 +53,13 @@
static struct scsi_host_template rz1000_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations rz1000_port_ops = {
- .set_mode = rz1000_set_mode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_mode = rz1000_set_mode,
};
static int rz1000_fifo_disable(struct pci_dev *pdev)
@@ -129,7 +89,6 @@
{
static int printed_version;
static const struct ata_port_info info = {
- .sht = &rz1000_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &rz1000_port_ops
@@ -140,7 +99,7 @@
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
if (rz1000_fifo_disable(pdev) == 0)
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL);
printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
/* Not safe to use so skip */
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 725a858..cbab397 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -151,7 +151,7 @@
}
/**
- * sc1200_qc_issue_prot - command issue
+ * sc1200_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@@ -160,7 +160,7 @@
* one MWDMA/UDMA bit.
*/
-static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@@ -175,59 +175,21 @@
sc1200_set_dmamode(ap, adev);
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static struct scsi_host_template sc1200_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_DUMB_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
+ .sg_tablesize = LIBATA_DUMB_MAX_PRD,
};
static struct ata_port_operations sc1200_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .qc_prep = ata_sff_dumb_qc_prep,
+ .qc_issue = sc1200_qc_issue,
+ .cable_detect = ata_cable_40wire,
.set_piomode = sc1200_set_piomode,
.set_dmamode = sc1200_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_dumb_qc_prep,
- .qc_issue = sc1200_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/**
@@ -242,7 +204,6 @@
static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &sc1200_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -252,7 +213,7 @@
/* Can't enable port 2 yet, see top comments */
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL);
}
static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 6c016de..e965b25 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -266,7 +266,7 @@
printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -274,7 +274,7 @@
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
- * Note: Original code is ata_tf_load().
+ * Note: Original code is ata_sff_tf_load().
*/
static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
@@ -341,7 +341,7 @@
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
- * Note: Original code is ata_tf_read().
+ * Note: Original code is ata_sff_tf_read().
*/
static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
@@ -373,7 +373,7 @@
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
- * Note: Original code is ata_exec_command().
+ * Note: Original code is ata_sff_exec_command().
*/
static void scc_exec_command (struct ata_port *ap,
@@ -382,7 +382,7 @@
DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
out_be32(ap->ioaddr.command_addr, tf->command);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
@@ -396,14 +396,14 @@
}
/**
- * scc_std_dev_select - Select device 0/1 on ATA bus
+ * scc_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
*
- * Note: Original code is ata_std_dev_select().
+ * Note: Original code is ata_sff_dev_select().
*/
-static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
+static void scc_dev_select (struct ata_port *ap, unsigned int device)
{
u8 tmp;
@@ -413,7 +413,7 @@
tmp = ATA_DEVICE_OBS | ATA_DEV1;
out_be32(ap->ioaddr.device_addr, tmp);
- ata_pause(ap);
+ ata_sff_pause(ap);
}
/**
@@ -441,7 +441,7 @@
out_be32(mmio + SCC_DMA_CMD, dmactl);
/* issue r/w command */
- ap->ops->exec_command(ap, &qc->tf);
+ ap->ops->sff_exec_command(ap, &qc->tf);
}
/**
@@ -476,7 +476,7 @@
struct ata_ioports *ioaddr = &ap->ioaddr;
u8 nsect, lbal;
- ap->ops->dev_select(ap, device);
+ ap->ops->sff_dev_select(ap, device);
out_be32(ioaddr->nsect_addr, 0x55);
out_be32(ioaddr->lbal_addr, 0xaa);
@@ -497,57 +497,78 @@
}
/**
- * scc_bus_post_reset - PATA device post reset
+ * scc_wait_after_reset - wait for devices to become ready after reset
*
- * Note: Original code is ata_bus_post_reset().
+ * Note: Original code is ata_sff_wait_after_reset
*/
-static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
- unsigned long deadline)
+int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
+ unsigned long deadline)
{
+ struct ata_port *ap = link->ap;
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int dev0 = devmask & (1 << 0);
unsigned int dev1 = devmask & (1 << 1);
- int rc;
+ int rc, ret = 0;
- /* if device 0 was found in ata_devchk, wait for its
- * BSY bit to clear
+ /* Spec mandates ">= 2ms" before checking status. We wait
+ * 150ms, because that was the magic delay used for ATAPI
+ * devices in Hale Landis's ATADRVR, for the period of time
+ * between when the ATA command register is written, and then
+ * status is checked. Because waiting for "a while" before
+ * checking status is fine, post SRST, we perform this magic
+ * delay here as well.
+ *
+ * Old drivers/ide uses the 2mS rule and then waits for ready.
*/
- if (dev0) {
- rc = ata_wait_ready(ap, deadline);
- if (rc && rc != -ENODEV)
- return rc;
- }
+ msleep(150);
- /* if device 1 was found in ata_devchk, wait for
- * register access, then wait for BSY to clear
+ /* always check readiness of the master device */
+ rc = ata_sff_wait_ready(link, deadline);
+ /* -ENODEV means the odd clown forgot the D7 pulldown resistor
+ * and TF status is 0xff, bail out on it too.
*/
- while (dev1) {
- u8 nsect, lbal;
+ if (rc)
+ return rc;
- ap->ops->dev_select(ap, 1);
- nsect = in_be32(ioaddr->nsect_addr);
- lbal = in_be32(ioaddr->lbal_addr);
- if ((nsect == 1) && (lbal == 1))
- break;
- if (time_after(jiffies, deadline))
- return -EBUSY;
- msleep(50); /* give drive a breather */
- }
+ /* if device 1 was found in ata_devchk, wait for register
+ * access briefly, then wait for BSY to clear.
+ */
if (dev1) {
- rc = ata_wait_ready(ap, deadline);
- if (rc && rc != -ENODEV)
- return rc;
+ int i;
+
+ ap->ops->sff_dev_select(ap, 1);
+
+ /* Wait for register access. Some ATAPI devices fail
+ * to set nsect/lbal after reset, so don't waste too
+ * much time on it. We're gonna wait for !BSY anyway.
+ */
+ for (i = 0; i < 2; i++) {
+ u8 nsect, lbal;
+
+ nsect = in_be32(ioaddr->nsect_addr);
+ lbal = in_be32(ioaddr->lbal_addr);
+ if ((nsect == 1) && (lbal == 1))
+ break;
+ msleep(50); /* give drive a breather */
+ }
+
+ rc = ata_sff_wait_ready(link, deadline);
+ if (rc) {
+ if (rc != -ENODEV)
+ return rc;
+ ret = rc;
+ }
}
/* is all this really necessary? */
- ap->ops->dev_select(ap, 0);
+ ap->ops->sff_dev_select(ap, 0);
if (dev1)
- ap->ops->dev_select(ap, 1);
+ ap->ops->sff_dev_select(ap, 1);
if (dev0)
- ap->ops->dev_select(ap, 0);
+ ap->ops->sff_dev_select(ap, 0);
- return 0;
+ return ret;
}
/**
@@ -570,32 +591,22 @@
udelay(20);
out_be32(ioaddr->ctl_addr, ap->ctl);
- /* wait a while before checking status */
- ata_wait_after_reset(ap, deadline);
-
- /* Before we perform post reset processing we want to see if
- * the bus shows 0xFF because the odd clown forgets the D7
- * pulldown resistor.
- */
- if (scc_check_status(ap) == 0xFF)
- return 0;
-
- scc_bus_post_reset(ap, devmask, deadline);
+ scc_wait_after_reset(&ap->link, devmask, deadline);
return 0;
}
/**
- * scc_std_softreset - reset host port via ATA SRST
+ * scc_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
* @deadline: deadline jiffies for the operation
*
- * Note: Original code is ata_std_softreset().
+ * Note: Original code is ata_sff_softreset().
*/
-static int scc_std_softreset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline)
+static int scc_softreset(struct ata_link *link, unsigned int *classes,
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
@@ -604,11 +615,6 @@
DPRINTK("ENTER\n");
- if (ata_link_offline(link)) {
- classes[0] = ATA_DEV_NONE;
- goto out;
- }
-
/* determine if device 0/1 are present */
if (scc_devchk(ap, 0))
devmask |= (1 << 0);
@@ -616,7 +622,7 @@
devmask |= (1 << 1);
/* select device 0 again */
- ap->ops->dev_select(ap, 0);
+ ap->ops->sff_dev_select(ap, 0);
/* issue bus reset */
DPRINTK("about to softreset, devmask=%x\n", devmask);
@@ -628,13 +634,12 @@
}
/* determine by signature whether we have ATA or ATAPI devices */
- classes[0] = ata_dev_try_classify(&ap->link.device[0],
+ classes[0] = ata_sff_dev_classify(&ap->link.device[0],
devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
- classes[1] = ata_dev_try_classify(&ap->link.device[1],
+ classes[1] = ata_sff_dev_classify(&ap->link.device[1],
devmask & (1 << 1), &err);
- out:
DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
return 0;
}
@@ -695,7 +700,7 @@
printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
/* TBD: SW reset */
- scc_std_softreset(&ap->link, &classes, deadline);
+ scc_softreset(&ap->link, &classes, deadline);
continue;
}
@@ -721,7 +726,7 @@
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_altstatus(ap); /* dummy read */
+ ata_sff_altstatus(ap); /* dummy read */
}
/**
@@ -742,7 +747,7 @@
return host_stat;
/* errata A252,A308 workaround: Step4 */
- if ((ata_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
+ if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
return (host_stat | ATA_DMA_INTR);
/* errata A308 workaround Step5 */
@@ -773,7 +778,7 @@
* @buflen: buffer length
* @rw: read/write
*
- * Note: Original code is ata_data_xfer().
+ * Note: Original code is ata_sff_data_xfer().
*/
static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
@@ -782,28 +787,28 @@
struct ata_port *ap = dev->link->ap;
unsigned int words = buflen >> 1;
unsigned int i;
- u16 *buf16 = (u16 *) buf;
+ __le16 *buf16 = (__le16 *) buf;
void __iomem *mmio = ap->ioaddr.data_addr;
/* Transfer multiple of 2 bytes */
if (rw == READ)
for (i = 0; i < words; i++)
- buf16[i] = le16_to_cpu(in_be32(mmio));
+ buf16[i] = cpu_to_le16(in_be32(mmio));
else
for (i = 0; i < words; i++)
- out_be32(mmio, cpu_to_le16(buf16[i]));
+ out_be32(mmio, le16_to_cpu(buf16[i]));
/* Transfer trailing 1 byte, if any. */
if (unlikely(buflen & 0x01)) {
- u16 align_buf[1] = { 0 };
+ __le16 align_buf[1] = { 0 };
unsigned char *trailing_buf = buf + buflen - 1;
if (rw == READ) {
- align_buf[0] = le16_to_cpu(in_be32(mmio));
+ align_buf[0] = cpu_to_le16(in_be32(mmio));
memcpy(trailing_buf, align_buf, 1);
} else {
memcpy(align_buf, trailing_buf, 1);
- out_be32(mmio, cpu_to_le16(align_buf[0]));
+ out_be32(mmio, le16_to_cpu(align_buf[0]));
}
words++;
}
@@ -815,7 +820,7 @@
* scc_irq_on - Enable interrupts on a port.
* @ap: Port on which interrupts are enabled.
*
- * Note: Original code is ata_irq_on().
+ * Note: Original code is ata_sff_irq_on().
*/
static u8 scc_irq_on (struct ata_port *ap)
@@ -829,19 +834,19 @@
out_be32(ioaddr->ctl_addr, ap->ctl);
tmp = ata_wait_idle(ap);
- ap->ops->irq_clear(ap);
+ ap->ops->sff_irq_clear(ap);
return tmp;
}
/**
- * scc_bmdma_freeze - Freeze BMDMA controller port
+ * scc_freeze - Freeze BMDMA controller port
* @ap: port to freeze
*
- * Note: Original code is ata_bmdma_freeze().
+ * Note: Original code is ata_sff_freeze().
*/
-static void scc_bmdma_freeze (struct ata_port *ap)
+static void scc_freeze (struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -854,9 +859,9 @@
* ATA_NIEN manipulation. Also, many controllers fail to mask
* previously pending IRQ on ATA_NIEN assertion. Clear it.
*/
- ata_chk_status(ap);
+ ap->ops->sff_check_status(ap);
- ap->ops->irq_clear(ap);
+ ap->ops->sff_irq_clear(ap);
}
/**
@@ -868,18 +873,18 @@
static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
{
link->ap->cbl = ATA_CBL_PATA80;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
- * scc_std_postreset - standard postreset callback
+ * scc_postreset - standard postreset callback
* @ap: the target ata_port
* @classes: classes of attached devices
*
- * Note: Original code is ata_std_postreset().
+ * Note: Original code is ata_sff_postreset().
*/
-static void scc_std_postreset(struct ata_link *link, unsigned int *classes)
+static void scc_postreset(struct ata_link *link, unsigned int *classes)
{
struct ata_port *ap = link->ap;
@@ -887,9 +892,9 @@
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
- ap->ops->dev_select(ap, 1);
+ ap->ops->sff_dev_select(ap, 1);
if (classes[1] != ATA_DEV_NONE)
- ap->ops->dev_select(ap, 0);
+ ap->ops->sff_dev_select(ap, 0);
/* bail out if no device is present */
if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
@@ -905,24 +910,13 @@
}
/**
- * scc_error_handler - Stock error handler for BMDMA controller
- * @ap: port to handle error for
- */
-
-static void scc_error_handler (struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, scc_pata_prereset, scc_std_softreset, NULL,
- scc_std_postreset);
-}
-
-/**
- * scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * scc_irq_clear - Clear PCI IDE BMDMA interrupt.
* @ap: Port associated with this ATA transaction.
*
- * Note: Original code is ata_bmdma_irq_clear().
+ * Note: Original code is ata_sff_irq_clear().
*/
-static void scc_bmdma_irq_clear (struct ata_port *ap)
+static void scc_irq_clear (struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.bmdma_addr;
@@ -968,52 +962,37 @@
}
static struct scsi_host_template scc_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations scc_pata_ops = {
+static struct ata_port_operations scc_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+
.set_piomode = scc_set_piomode,
.set_dmamode = scc_set_dmamode,
.mode_filter = scc_mode_filter,
- .tf_load = scc_tf_load,
- .tf_read = scc_tf_read,
- .exec_command = scc_exec_command,
- .check_status = scc_check_status,
- .check_altstatus = scc_check_altstatus,
- .dev_select = scc_std_dev_select,
+ .sff_tf_load = scc_tf_load,
+ .sff_tf_read = scc_tf_read,
+ .sff_exec_command = scc_exec_command,
+ .sff_check_status = scc_check_status,
+ .sff_check_altstatus = scc_check_altstatus,
+ .sff_dev_select = scc_dev_select,
.bmdma_setup = scc_bmdma_setup,
.bmdma_start = scc_bmdma_start,
.bmdma_stop = scc_bmdma_stop,
.bmdma_status = scc_bmdma_status,
- .data_xfer = scc_data_xfer,
+ .sff_data_xfer = scc_data_xfer,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .freeze = scc_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
-
- .error_handler = scc_error_handler,
+ .freeze = scc_freeze,
+ .prereset = scc_pata_prereset,
+ .softreset = scc_softreset,
+ .postreset = scc_postreset,
.post_internal_cmd = scc_bmdma_stop,
- .irq_clear = scc_bmdma_irq_clear,
- .irq_on = scc_irq_on,
+ .sff_irq_clear = scc_irq_clear,
+ .sff_irq_on = scc_irq_on,
.port_start = scc_port_start,
.port_stop = scc_port_stop,
@@ -1166,8 +1145,8 @@
if (rc)
return rc;
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &scc_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &scc_sht);
}
static struct pci_driver scc_pci_driver = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index a589c0f..ffd26d0 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -199,7 +199,7 @@
{
if (adev->class == ATA_DEV_ATA)
mask &= ~ATA_MASK_UDMA;
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
@@ -219,7 +219,7 @@
/* Disk, UDMA */
if (adev->class != ATA_DEV_ATA)
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
/* Actually do need to check */
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
@@ -228,7 +228,7 @@
if (!strcmp(p, model_num))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_pci_default_filter(adev, mask);
+ return ata_bmdma_mode_filter(adev, mask);
}
/**
@@ -298,89 +298,20 @@
}
static struct scsi_host_template serverworks_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations serverworks_osb4_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = serverworks_cable_detect,
+ .mode_filter = serverworks_osb4_filter,
.set_piomode = serverworks_set_piomode,
.set_dmamode = serverworks_set_dmamode,
- .mode_filter = serverworks_osb4_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = serverworks_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
static struct ata_port_operations serverworks_csb_port_ops = {
- .set_piomode = serverworks_set_piomode,
- .set_dmamode = serverworks_set_dmamode,
+ .inherits = &serverworks_osb4_port_ops,
.mode_filter = serverworks_csb_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = serverworks_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
static int serverworks_fixup_osb4(struct pci_dev *pdev)
@@ -468,28 +399,24 @@
{
static const struct ata_port_info info[4] = {
{ /* OSB4 */
- .sht = &serverworks_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = 0x07,
.port_ops = &serverworks_osb4_port_ops
}, { /* OSB4 no UDMA */
- .sht = &serverworks_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = 0x00,
.port_ops = &serverworks_osb4_port_ops
}, { /* CSB5 */
- .sht = &serverworks_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA4,
.port_ops = &serverworks_csb_port_ops
}, { /* CSB5 - later revisions*/
- .sht = &serverworks_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -498,6 +425,11 @@
}
};
const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
+ int rc;
+
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
/* Force master latency timer to 64 PCI clocks */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
@@ -527,24 +459,30 @@
serverworks_fixup_ht1000(pdev);
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL);
}
#ifdef CONFIG_PM
static int serverworks_reinit_one(struct pci_dev *pdev)
{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
/* Force master latency timer to 64 PCI clocks */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
- switch (pdev->device)
- {
+ switch (pdev->device) {
case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
serverworks_fixup_osb4(pdev);
break;
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
- ata_pci_clear_simplex(pdev);
+ ata_pci_bmdma_clear_simplex(pdev);
/* fall through */
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
@@ -554,7 +492,9 @@
serverworks_fixup_ht1000(pdev);
break;
}
- return ata_pci_device_resume(pdev);
+
+ ata_host_resume(host);
+ return 0;
}
#endif
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 3988e44..720b864 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -192,54 +192,14 @@
}
static struct scsi_host_template sil680_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations sil680_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = sil680_cable_detect,
.set_piomode = sil680_set_piomode,
.set_dmamode = sil680_set_dmamode,
- .mode_filter = ata_pci_default_filter,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = sil680_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
/**
@@ -270,7 +230,7 @@
tmpbyte & 1, tmpbyte & 0x30);
*try_mmio = 0;
-#ifdef CONFIG_PPC
+#ifdef CONFIG_PPC_MERGE
if (machine_is(cell))
*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
#endif
@@ -322,7 +282,6 @@
const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &sil680_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -330,7 +289,6 @@
.port_ops = &sil680_port_ops
};
static const struct ata_port_info info_slow = {
- .sht = &sil680_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -346,6 +304,10 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
switch (sil680_init_chip(pdev, &try_mmio)) {
case 0:
ppi[0] = &info_slow;
@@ -388,28 +350,33 @@
host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
- ata_std_ports(&host->ports[0]->ioaddr);
+ ata_sff_std_ports(&host->ports[0]->ioaddr);
host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
- ata_std_ports(&host->ports[1]->ioaddr);
+ ata_sff_std_ports(&host->ports[1]->ioaddr);
/* Register & activate */
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &sil680_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &sil680_sht);
use_ioports:
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL);
}
#ifdef CONFIG_PM
static int sil680_reinit_one(struct pci_dev *pdev)
{
- int try_mmio;
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int try_mmio, rc;
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
sil680_init_chip(pdev, &try_mmio);
- return ata_pci_device_resume(pdev);
+ ata_host_resume(host);
+ return 0;
}
#endif
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index dc7e915..e82c66e 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -156,24 +156,11 @@
/* Clear the FIFO settings. We can't enable the FIFO until
we know we are poking at a disk */
pci_write_config_byte(pdev, 0x4B, 0);
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
- * sis_error_handler - Probe specified port on PATA host controller
- * @ap: Port to probe
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void sis_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, sis_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-/**
* sis_set_fifo - Set RWP fifo bits for this device
* @ap: Port
* @adev: Device
@@ -514,217 +501,57 @@
}
static struct scsi_host_template sis_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations sis_133_ops = {
+static struct ata_port_operations sis_133_for_sata_ops = {
+ .inherits = &ata_bmdma_port_ops,
.set_piomode = sis_133_set_piomode,
.set_dmamode = sis_133_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = sis_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sis_133_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
-static const struct ata_port_operations sis_133_for_sata_ops = {
+static struct ata_port_operations sis_base_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .prereset = sis_pre_reset,
+};
+
+static struct ata_port_operations sis_133_ops = {
+ .inherits = &sis_base_ops,
.set_piomode = sis_133_set_piomode,
.set_dmamode = sis_133_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sis_133_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
-static const struct ata_port_operations sis_133_early_ops = {
+static struct ata_port_operations sis_133_early_ops = {
+ .inherits = &sis_base_ops,
.set_piomode = sis_100_set_piomode,
.set_dmamode = sis_133_early_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = sis_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sis_66_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
-static const struct ata_port_operations sis_100_ops = {
+static struct ata_port_operations sis_100_ops = {
+ .inherits = &sis_base_ops,
.set_piomode = sis_100_set_piomode,
.set_dmamode = sis_100_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = sis_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sis_66_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
-static const struct ata_port_operations sis_66_ops = {
+static struct ata_port_operations sis_66_ops = {
+ .inherits = &sis_base_ops,
.set_piomode = sis_old_set_piomode,
.set_dmamode = sis_66_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
.cable_detect = sis_66_cable_detect,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = sis_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
-static const struct ata_port_operations sis_old_ops = {
+static struct ata_port_operations sis_old_ops = {
+ .inherits = &sis_base_ops,
.set_piomode = sis_old_set_piomode,
.set_dmamode = sis_old_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = sis_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
};
static const struct ata_port_info sis_info = {
- .sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07,
@@ -732,7 +559,6 @@
.port_ops = &sis_old_ops,
};
static const struct ata_port_info sis_info33 = {
- .sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07,
@@ -740,42 +566,36 @@
.port_ops = &sis_old_ops,
};
static const struct ata_port_info sis_info66 = {
- .sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA4, /* UDMA 66 */
.port_ops = &sis_66_ops,
};
static const struct ata_port_info sis_info100 = {
- .sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA5,
.port_ops = &sis_100_ops,
};
static const struct ata_port_info sis_info100_early = {
- .sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.udma_mask = ATA_UDMA5,
.pio_mask = 0x1f, /* pio0-4 */
.port_ops = &sis_66_ops,
};
static const struct ata_port_info sis_info133 = {
- .sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &sis_133_ops,
};
const struct ata_port_info sis_info133_for_sata = {
- .sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &sis_133_for_sata_ops,
};
static const struct ata_port_info sis_info133_early = {
- .sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
@@ -857,11 +677,11 @@
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_port_info port;
- const struct ata_port_info *ppi[] = { &port, NULL };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
struct pci_dev *host = NULL;
struct sis_chipset *chipset = NULL;
struct sis_chipset *sets;
+ int rc;
static struct sis_chipset sis_chipsets[] = {
@@ -914,8 +734,11 @@
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
- /* We have to find the bridge first */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+ /* We have to find the bridge first */
for (sets = &sis_chipsets[0]; sets->device; sets++) {
host = pci_get_device(PCI_VENDOR_ID_SI, sets->device, NULL);
if (host != NULL) {
@@ -994,12 +817,11 @@
if (chipset == NULL)
return -ENODEV;
- port = *chipset->info;
- port.private_data = chipset;
+ ppi[0] = chipset->info;
sis_fixup(pdev, chipset);
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset);
}
static const struct pci_device_id sis_pci_tbl[] = {
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 81ef207..70d94fb 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -60,13 +60,7 @@
if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
-}
-
-
-static void sl82c105_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, sl82c105_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
@@ -235,55 +229,17 @@
}
static struct scsi_host_template sl82c105_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations sl82c105_port_ops = {
- .set_piomode = sl82c105_set_piomode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = sl82c105_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
+ .inherits = &ata_bmdma_port_ops,
+ .qc_defer = sl82c105_qc_defer,
.bmdma_start = sl82c105_bmdma_start,
.bmdma_stop = sl82c105_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_defer = sl82c105_qc_defer,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = sl82c105_set_piomode,
+ .prereset = sl82c105_pre_reset,
};
/**
@@ -327,14 +283,12 @@
static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info_dma = {
- .sht = &sl82c105_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &sl82c105_port_ops
};
static const struct ata_port_info info_early = {
- .sht = &sl82c105_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &sl82c105_port_ops
@@ -344,6 +298,11 @@
NULL };
u32 val;
int rev;
+ int rc;
+
+ rc = pcim_enable_device(dev);
+ if (rc)
+ return rc;
rev = sl82c105_bridge_revision(dev);
@@ -358,7 +317,7 @@
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL);
}
static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 403eafc..b181261 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -66,16 +66,11 @@
if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no]))
return -ENOENT;
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
-static void triflex_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, triflex_prereset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
/**
* triflex_load_timing - timing configuration
* @ap: ATA interface
@@ -180,60 +175,21 @@
}
static struct scsi_host_template triflex_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations triflex_port_ops = {
- .set_piomode = triflex_set_piomode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = triflex_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_40wire,
-
- .bmdma_setup = ata_bmdma_setup,
+ .inherits = &ata_bmdma_port_ops,
.bmdma_start = triflex_bmdma_start,
.bmdma_stop = triflex_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = triflex_set_piomode,
+ .prereset = triflex_prereset,
};
static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
- .sht = &triflex_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -245,7 +201,7 @@
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
- return ata_pci_init_one(dev, ppi);
+ return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL);
}
static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index d119a68..d484074 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -210,23 +210,11 @@
return -ENOENT;
}
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
/**
- * via_error_handler - reset for VIA chips
- * @ap: ATA port
- *
- * Handle the reset callback for the later chips with cable detect
- */
-
-static void via_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, via_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-/**
* via_do_set_mode - set initial PIO mode data
* @ap: ATA interface
* @adev: ATA device
@@ -335,89 +323,20 @@
}
static struct scsi_host_template via_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations via_port_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = via_cable_detect,
.set_piomode = via_set_piomode,
.set_dmamode = via_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = via_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = via_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .prereset = via_pre_reset,
};
static struct ata_port_operations via_port_ops_noirq = {
- .set_piomode = via_set_piomode,
- .set_dmamode = via_set_dmamode,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = via_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = via_cable_detect,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = ata_data_xfer_noirq,
-
- .irq_handler = ata_interrupt,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .inherits = &via_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
};
/**
@@ -467,7 +386,6 @@
{
/* Early VIA without UDMA support */
static const struct ata_port_info via_mwdma_info = {
- .sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -475,7 +393,6 @@
};
/* Ditto with IRQ masking required */
static const struct ata_port_info via_mwdma_info_borked = {
- .sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -483,7 +400,6 @@
};
/* VIA UDMA 33 devices (and borked 66) */
static const struct ata_port_info via_udma33_info = {
- .sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -492,7 +408,6 @@
};
/* VIA UDMA 66 devices */
static const struct ata_port_info via_udma66_info = {
- .sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -501,7 +416,6 @@
};
/* VIA UDMA 100 devices */
static const struct ata_port_info via_udma100_info = {
- .sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@@ -510,24 +424,27 @@
};
/* UDMA133 with bad AST (All current 133) */
static const struct ata_port_info via_udma133_info = {
- .sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */
.port_ops = &via_port_ops
};
- struct ata_port_info type;
- const struct ata_port_info *ppi[] = { &type, NULL };
+ const struct ata_port_info *ppi[] = { NULL, NULL };
struct pci_dev *isa = NULL;
const struct via_isa_bridge *config;
static int printed_version;
u8 enable;
u32 timing;
+ int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
/* To find out how the IDE will behave and what features we
actually have to look at the bridge not the IDE controller */
for (config = via_isa_bridges; config->id; config++)
@@ -561,25 +478,25 @@
switch(config->flags & VIA_UDMA) {
case VIA_UDMA_NONE:
if (config->flags & VIA_NO_UNMASK)
- type = via_mwdma_info_borked;
+ ppi[0] = &via_mwdma_info_borked;
else
- type = via_mwdma_info;
+ ppi[0] = &via_mwdma_info;
break;
case VIA_UDMA_33:
- type = via_udma33_info;
+ ppi[0] = &via_udma33_info;
break;
case VIA_UDMA_66:
- type = via_udma66_info;
+ ppi[0] = &via_udma66_info;
/* The 66 MHz devices require we enable the clock */
pci_read_config_dword(pdev, 0x50, &timing);
timing |= 0x80008;
pci_write_config_dword(pdev, 0x50, timing);
break;
case VIA_UDMA_100:
- type = via_udma100_info;
+ ppi[0] = &via_udma100_info;
break;
case VIA_UDMA_133:
- type = via_udma133_info;
+ ppi[0] = &via_udma133_info;
break;
default:
WARN_ON(1);
@@ -594,9 +511,7 @@
}
/* We have established the device type, now fire it up */
- type.private_data = (void *)config;
-
- return ata_pci_init_one(pdev, ppi);
+ return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config);
}
#ifdef CONFIG_PM
@@ -615,6 +530,11 @@
u32 timing;
struct ata_host *host = dev_get_drvdata(&pdev->dev);
const struct via_isa_bridge *config = host->private_data;
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
via_config_fifo(pdev, config->flags);
@@ -630,7 +550,9 @@
timing &= ~0x80008;
pci_write_config_dword(pdev, 0x50, timing);
}
- return ata_pci_device_resume(pdev);
+
+ ata_host_resume(host);
+ return 0;
}
#endif
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 99c92ed..6e52a35 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -116,53 +116,20 @@
buflen += 4 - slop;
}
} else
- buflen = ata_data_xfer(dev, buf, buflen, rw);
+ buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
return buflen;
}
static struct scsi_host_template winbond_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations winbond_port_ops = {
- .set_piomode = winbond_set_piomode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = winbond_data_xfer,
.cable_detect = ata_cable_40wire,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
-
- .data_xfer = winbond_data_xfer,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_sff_port_start,
+ .set_piomode = winbond_set_piomode,
};
/**
@@ -231,7 +198,7 @@
ap->ioaddr.cmd_addr = cmd_addr;
ap->ioaddr.altstatus_addr = ctl_addr;
ap->ioaddr.ctl_addr = ctl_addr;
- ata_std_ports(&ap->ioaddr);
+ ata_sff_std_ports(&ap->ioaddr);
/* hook in a private data structure per channel */
host->private_data = &winbond_data[nr_winbond_host];
@@ -239,7 +206,7 @@
winbond_data[nr_winbond_host].platform_dev = pdev;
/* activate */
- rc = ata_host_activate(host, 14 + i, ata_interrupt, 0,
+ rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0,
&winbond_sht);
if (rc)
goto err_unregister;
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 8e1b7e9..be53545 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -131,56 +131,33 @@
static int adma_ata_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
static int adma_port_start(struct ata_port *ap);
-static void adma_host_stop(struct ata_host *host);
static void adma_port_stop(struct ata_port *ap);
static void adma_qc_prep(struct ata_queued_cmd *qc);
static unsigned int adma_qc_issue(struct ata_queued_cmd *qc);
static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
-static void adma_bmdma_stop(struct ata_queued_cmd *qc);
-static u8 adma_bmdma_status(struct ata_port *ap);
-static void adma_irq_clear(struct ata_port *ap);
static void adma_freeze(struct ata_port *ap);
static void adma_thaw(struct ata_port *ap);
-static void adma_error_handler(struct ata_port *ap);
+static int adma_prereset(struct ata_link *link, unsigned long deadline);
static struct scsi_host_template adma_ata_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
- .proc_name = DRV_NAME,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = LIBATA_MAX_PRD,
.dma_boundary = ADMA_DMA_BOUNDARY,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .use_clustering = ENABLE_CLUSTERING,
- .emulated = ATA_SHT_EMULATED,
};
-static const struct ata_port_operations adma_ata_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
+static struct ata_port_operations adma_ata_ops = {
+ .inherits = &ata_sff_port_ops,
+
.check_atapi_dma = adma_check_atapi_dma,
- .data_xfer = ata_data_xfer,
.qc_prep = adma_qc_prep,
.qc_issue = adma_qc_issue,
+
.freeze = adma_freeze,
.thaw = adma_thaw,
- .error_handler = adma_error_handler,
- .irq_clear = adma_irq_clear,
- .irq_on = ata_irq_on,
+ .prereset = adma_prereset,
+
.port_start = adma_port_start,
.port_stop = adma_port_stop,
- .host_stop = adma_host_stop,
- .bmdma_stop = adma_bmdma_stop,
- .bmdma_status = adma_bmdma_status,
};
static struct ata_port_info adma_port_info[] = {
@@ -213,21 +190,6 @@
return 1; /* ATAPI DMA not yet supported */
}
-static void adma_bmdma_stop(struct ata_queued_cmd *qc)
-{
- /* nothing */
-}
-
-static u8 adma_bmdma_status(struct ata_port *ap)
-{
- return 0;
-}
-
-static void adma_irq_clear(struct ata_port *ap)
-{
- /* nothing */
-}
-
static void adma_reset_engine(struct ata_port *ap)
{
void __iomem *chan = ADMA_PORT_REGS(ap);
@@ -246,7 +208,7 @@
/* mask/clear ATA interrupts */
writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
- ata_check_status(ap);
+ ata_sff_check_status(ap);
/* reset the ADMA engine */
adma_reset_engine(ap);
@@ -281,7 +243,7 @@
/* mask/clear ATA interrupts */
writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
- ata_check_status(ap);
+ ata_sff_check_status(ap);
/* reset ADMA to idle state */
writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
@@ -304,13 +266,7 @@
pp->state = adma_state_mmio;
adma_reinit_engine(ap);
- return ata_std_prereset(link, deadline);
-}
-
-static void adma_error_handler(struct ata_port *ap)
-{
- ata_do_eh(ap, adma_prereset, ata_std_softreset, NULL,
- ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
static int adma_fill_sg(struct ata_queued_cmd *qc)
@@ -366,7 +322,7 @@
adma_enter_reg_mode(qc->ap);
if (qc->tf.protocol != ATA_PROT_DMA) {
- ata_qc_prep(qc);
+ ata_sff_qc_prep(qc);
return;
}
@@ -465,7 +421,7 @@
}
pp->state = adma_state_mmio;
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static inline unsigned int adma_intr_pkt(struct ata_host *host)
@@ -536,7 +492,7 @@
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
/* check main status, clearing INTRQ */
- u8 status = ata_check_status(ap);
+ u8 status = ata_sff_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
@@ -633,14 +589,6 @@
adma_reset_engine(ap);
}
-static void adma_host_stop(struct ata_host *host)
-{
- unsigned int port_no;
-
- for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
- adma_reset_engine(host->ports[port_no]);
-}
-
static void adma_host_init(struct ata_host *host, unsigned int chip_id)
{
unsigned int port_no;
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 07791a7..fddd346 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -35,7 +35,6 @@
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_NCQ),
- SATA_FSL_HOST_LFLAGS = ATA_LFLAG_SKIP_D2H_BSY,
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
@@ -245,17 +244,6 @@
dma_addr_t cmdslot_paddr;
struct command_desc *cmdentry;
dma_addr_t cmdentry_paddr;
-
- /*
- * SATA FSL controller has a Status FIS which should contain the
- * received D2H FIS & taskfile registers. This SFIS is present in
- * the command descriptor, and to have a ready reference to it,
- * we are caching it here, quite similar to what is done in H/W on
- * AHCI compliant devices by copying taskfile fields to a 32-bit
- * register.
- */
-
- struct ata_taskfile tf;
};
/*
@@ -465,6 +453,20 @@
return 0;
}
+static bool sata_fsl_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+ struct sata_fsl_port_priv *pp = qc->ap->private_data;
+ struct sata_fsl_host_priv *host_priv = qc->ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
+ struct command_desc *cd;
+
+ cd = pp->cmdentry + tag;
+
+ ata_tf_from_fis(cd->sfis, &qc->result_tf);
+ return true;
+}
+
static int sata_fsl_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
u32 val)
{
@@ -556,38 +558,6 @@
ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
}
-/*
- * NOTE : 1st D2H FIS from device does not update sfis in command descriptor.
- */
-static inline void sata_fsl_cache_taskfile_from_d2h_fis(struct ata_queued_cmd
- *qc,
- struct ata_port *ap)
-{
- struct sata_fsl_port_priv *pp = ap->private_data;
- struct sata_fsl_host_priv *host_priv = ap->host->private_data;
- void __iomem *hcr_base = host_priv->hcr_base;
- unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
- struct command_desc *cd;
-
- cd = pp->cmdentry + tag;
-
- ata_tf_from_fis(cd->sfis, &pp->tf);
-}
-
-static u8 sata_fsl_check_status(struct ata_port *ap)
-{
- struct sata_fsl_port_priv *pp = ap->private_data;
-
- return pp->tf.command;
-}
-
-static void sata_fsl_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct sata_fsl_port_priv *pp = ap->private_data;
-
- *tf = pp->tf;
-}
-
static int sata_fsl_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
@@ -708,6 +678,15 @@
return ata_dev_classify(&tf);
}
+static int sata_fsl_prereset(struct ata_linke *link, unsigned long deadline)
+{
+ /* FIXME: Never skip softreset, sata_fsl_softreset() is
+ * combination of soft and hard resets. sata_fsl_softreset()
+ * needs to be splitted into soft and hard resets.
+ */
+ return 0;
+}
+
static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
@@ -913,16 +892,6 @@
return -EIO;
}
-static void sata_fsl_error_handler(struct ata_port *ap)
-{
-
- DPRINTK("in xx_error_handler\n");
-
- /* perform recovery */
- ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_std_hardreset,
- ata_std_postreset);
-}
-
static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
{
if (qc->flags & ATA_QCFLAG_FAILED)
@@ -934,11 +903,6 @@
}
}
-static void sata_fsl_irq_clear(struct ata_port *ap)
-{
- /* unused */
-}
-
static void sata_fsl_error_intr(struct ata_port *ap)
{
struct ata_link *link = &ap->link;
@@ -996,7 +960,7 @@
/* handle fatal errors */
if (hstatus & FATAL_ERROR_DECODE) {
err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_SOFTRESET;
+ action |= ATA_EH_RESET;
/* how will fatal error interrupts be completed ?? */
freeze = 1;
}
@@ -1013,10 +977,9 @@
/* record error info */
qc = ata_qc_from_tag(ap, link->active_tag);
- if (qc) {
- sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
+ if (qc)
qc->err_mask |= err_mask;
- } else
+ else
ehi->err_mask |= err_mask;
ehi->action |= action;
@@ -1029,14 +992,6 @@
ata_port_abort(ap);
}
-static void sata_fsl_qc_complete(struct ata_queued_cmd *qc)
-{
- if (qc->flags & ATA_QCFLAG_RESULT_TF) {
- DPRINTK("xx_qc_complete called\n");
- sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
- }
-}
-
static void sata_fsl_host_intr(struct ata_port *ap)
{
struct ata_link *link = &ap->link;
@@ -1077,10 +1032,8 @@
for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
if (qc_active & (1 << i)) {
qc = ata_qc_from_tag(ap, i);
- if (qc) {
- sata_fsl_qc_complete(qc);
+ if (qc)
ata_qc_complete(qc);
- }
DPRINTK
("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
i, ioread32(hcr_base + CC),
@@ -1096,10 +1049,8 @@
DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
link->active_tag, ioread32(hcr_base + CC));
- if (qc) {
- sata_fsl_qc_complete(qc);
+ if (qc)
ata_qc_complete(qc);
- }
} else {
/* Spurious Interrupt!! */
DPRINTK("spurious interrupt!!, CC = 0x%x\n",
@@ -1197,41 +1148,26 @@
* scsi mid-layer and libata interface structures
*/
static struct scsi_host_template sata_fsl_sht = {
- .module = THIS_MODULE,
- .name = "sata_fsl",
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .change_queue_depth = ata_scsi_change_queue_depth,
+ ATA_NCQ_SHT("sata_fsl"),
.can_queue = SATA_FSL_QUEUE_DEPTH,
- .this_id = ATA_SHT_THIS_ID,
.sg_tablesize = SATA_FSL_MAX_PRD_USABLE,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = "sata_fsl",
.dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
static const struct ata_port_operations sata_fsl_ops = {
- .check_status = sata_fsl_check_status,
- .check_altstatus = sata_fsl_check_status,
- .dev_select = ata_noop_dev_select,
-
- .tf_read = sata_fsl_tf_read,
+ .inherits = &sata_port_ops,
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
- .irq_clear = sata_fsl_irq_clear,
+ .qc_fill_rtf = sata_fsl_qc_fill_rtf,
.scr_read = sata_fsl_scr_read,
.scr_write = sata_fsl_scr_write,
.freeze = sata_fsl_freeze,
.thaw = sata_fsl_thaw,
- .error_handler = sata_fsl_error_handler,
+ .prereset = sata_fsl_prereset,
+ .softreset = sata_fsl_softreset,
.post_internal_cmd = sata_fsl_post_internal_cmd,
.port_start = sata_fsl_port_start,
@@ -1241,7 +1177,6 @@
static const struct ata_port_info sata_fsl_port_info[] = {
{
.flags = SATA_FSL_HOST_FLAGS,
- .link_flags = SATA_FSL_HOST_LFLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.udma_mask = 0x7f, /* udma 0-6 */
.port_ops = &sata_fsl_ops,
@@ -1256,7 +1191,6 @@
void __iomem *ssr_base = NULL;
void __iomem *csr_base = NULL;
struct sata_fsl_host_priv *host_priv = NULL;
- struct resource *r;
int irq;
struct ata_host *host;
@@ -1266,8 +1200,6 @@
dev_printk(KERN_INFO, &ofdev->dev,
"Sata FSL Platform/CSB Driver init\n");
- r = kmalloc(sizeof(struct resource), GFP_KERNEL);
-
hcr_base = of_iomap(ofdev->node, 0);
if (!hcr_base)
goto error_exit_with_cleanup;
@@ -1300,11 +1232,6 @@
/* host->iomap is not used currently */
host->private_data = host_priv;
- /* setup port(s) */
-
- host->ports[0]->ioaddr.cmd_addr = host_priv->hcr_base;
- host->ports[0]->ioaddr.scr_addr = host_priv->ssr_base;
-
/* initialize host controller */
sata_fsl_init_controller(host);
@@ -1348,10 +1275,7 @@
static struct of_device_id fsl_sata_match[] = {
{
- .compatible = "fsl,mpc8315-sata",
- },
- {
- .compatible = "fsl,mpc8379-sata",
+ .compatible = "fsl,pq-sata",
},
{},
};
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 59e65ed..d27bb9a 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -109,21 +109,7 @@
};
static struct scsi_host_template inic_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static const int scr_map[] = {
@@ -236,7 +222,7 @@
writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
/* issue r/w command */
- ap->ops->exec_command(ap, &qc->tf);
+ ap->ops->sff_exec_command(ap, &qc->tf);
}
static void inic_bmdma_start(struct ata_queued_cmd *qc)
@@ -266,11 +252,6 @@
return ATA_DMA_INTR;
}
-static void inic_irq_clear(struct ata_port *ap)
-{
- /* noop */
-}
-
static void inic_host_intr(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
@@ -286,14 +267,14 @@
ata_qc_from_tag(ap, ap->link.active_tag);
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
- ata_chk_status(ap); /* clear ATA interrupt */
+ ap->ops->sff_check_status(ap); /* clear ATA interrupt */
return;
}
- if (likely(ata_host_intr(ap, qc)))
+ if (likely(ata_sff_host_intr(ap, qc)))
return;
- ata_chk_status(ap); /* clear ATA interrupt */
+ ap->ops->sff_check_status(ap); /* clear ATA interrupt */
ata_port_printk(ap, KERN_WARNING, "unhandled "
"interrupt, irq_stat=%x\n", irq_stat);
return;
@@ -370,12 +351,12 @@
*/
if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
qc->tf.command == ATA_CMD_ID_ATAPI)) {
- u8 stat = ata_chk_status(ap);
+ u8 stat = ap->ops->sff_check_status(ap);
if (stat == 0x7f || stat == 0xff)
return AC_ERR_HSM;
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static void inic_freeze(struct ata_port *ap)
@@ -384,7 +365,7 @@
__inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
- ata_chk_status(ap);
+ ap->ops->sff_check_status(ap);
writeb(0xff, port_base + PORT_IRQ_STAT);
readb(port_base + PORT_IRQ_STAT); /* flush */
@@ -394,7 +375,7 @@
{
void __iomem *port_base = inic_port_base(ap);
- ata_chk_status(ap);
+ ap->ops->sff_check_status(ap);
writeb(0xff, port_base + PORT_IRQ_STAT);
__inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
@@ -436,10 +417,8 @@
if (ata_link_online(link)) {
struct ata_taskfile tf;
- /* wait a while before checking status */
- ata_wait_after_reset(ap, deadline);
-
- rc = ata_wait_ready(ap, deadline);
+ /* wait for link to become ready */
+ rc = ata_sff_wait_after_reset(link, 1, deadline);
/* link occupied, -ENODEV too is an error */
if (rc) {
ata_link_printk(link, KERN_WARNING, "device not ready "
@@ -447,10 +426,8 @@
return rc;
}
- ata_tf_read(ap, &tf);
+ ata_sff_tf_read(ap, &tf);
*class = ata_dev_classify(&tf);
- if (*class == ATA_DEV_UNKNOWN)
- *class = ATA_DEV_NONE;
}
return 0;
@@ -471,8 +448,7 @@
spin_unlock_irqrestore(ap->lock, flags);
/* PIO and DMA engines have been stopped, perform recovery */
- ata_do_eh(ap, ata_std_prereset, NULL, inic_hardreset,
- ata_std_postreset);
+ ata_std_error_handler(ap);
}
static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
@@ -541,35 +517,26 @@
}
static struct ata_port_operations inic_port_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .scr_read = inic_scr_read,
- .scr_write = inic_scr_write,
+ .inherits = &ata_sff_port_ops,
.bmdma_setup = inic_bmdma_setup,
.bmdma_start = inic_bmdma_start,
.bmdma_stop = inic_bmdma_stop,
.bmdma_status = inic_bmdma_status,
-
- .irq_clear = inic_irq_clear,
- .irq_on = ata_irq_on,
-
- .qc_prep = ata_qc_prep,
.qc_issue = inic_qc_issue,
- .data_xfer = ata_data_xfer,
.freeze = inic_freeze,
.thaw = inic_thaw,
+ .softreset = ATA_OP_NULL, /* softreset is broken */
+ .hardreset = inic_hardreset,
.error_handler = inic_error_handler,
.post_internal_cmd = inic_post_internal_cmd,
.dev_config = inic_dev_config,
- .port_resume = inic_port_resume,
+ .scr_read = inic_scr_read,
+ .scr_write = inic_scr_write,
+ .port_resume = inic_port_resume,
.port_start = inic_port_start,
};
@@ -692,7 +659,7 @@
((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
- ata_std_ports(port);
+ ata_sff_std_ports(port);
ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 6ebebde..05ff8c7 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1,6 +1,7 @@
/*
* sata_mv.c - Marvell SATA support
*
+ * Copyright 2008: Marvell Corporation, all rights reserved.
* Copyright 2005: EMC Corporation, all rights reserved.
* Copyright 2005 Red Hat, Inc. All rights reserved.
*
@@ -39,7 +40,9 @@
5) Investigate problems with PCI Message Signalled Interrupts (MSI).
- 6) Add port multiplier support (intermediate)
+ 6) Cache frequently-accessed registers in mv_port_priv to reduce overhead.
+
+ 7) Fix/reenable hot plug/unplug (should happen as a side-effect of (2) above).
8) Develop a low-power-consumption strategy, and implement it.
@@ -61,7 +64,6 @@
*/
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -131,7 +133,7 @@
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
/* SoC integrated controllers, no PCI interface */
- MV_FLAG_SOC = (1 << 28),
+ MV_FLAG_SOC = (1 << 28),
MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
@@ -141,6 +143,7 @@
CRQB_FLAG_READ = (1 << 0),
CRQB_TAG_SHIFT = 1,
CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
+ CRQB_PMP_SHIFT = 12, /* CRQB Gen-II/IIE PMP shift */
CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */
CRQB_CMD_ADDR_SHIFT = 8,
CRQB_CMD_CS = (0x2 << 11),
@@ -199,7 +202,7 @@
TWSI_INT = (1 << 24),
HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
- HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
+ HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
HC_MAIN_RSVD),
@@ -223,13 +226,24 @@
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
SATA_ACTIVE_OFS = 0x350,
SATA_FIS_IRQ_CAUSE_OFS = 0x364,
+
+ LTMODE_OFS = 0x30c,
+ LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */
+
PHY_MODE3 = 0x310,
PHY_MODE4 = 0x314,
PHY_MODE2 = 0x330,
+ SATA_IFCTL_OFS = 0x344,
+ SATA_IFSTAT_OFS = 0x34c,
+ VENDOR_UNIQUE_FIS_OFS = 0x35c,
+
+ FIS_CFG_OFS = 0x360,
+ FIS_CFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
+
MV5_PHY_MODE = 0x74,
MV5_LT_MODE = 0x30,
MV5_PHY_CTL = 0x0C,
- SATA_INTERFACE_CTL = 0x050,
+ SATA_INTERFACE_CFG = 0x050,
MV_M2_PREAMP_MASK = 0x7e0,
@@ -240,6 +254,8 @@
EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */
EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */
EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */
+ EDMA_CFG_EDMA_FBS = (1 << 16), /* EDMA FIS-Based Switching */
+ EDMA_CFG_FBS = (1 << 26), /* FIS-Based Switching */
EDMA_ERR_IRQ_CAUSE_OFS = 0x8,
EDMA_ERR_IRQ_MASK_OFS = 0xc,
@@ -282,7 +298,9 @@
EDMA_ERR_IRQ_TRANSIENT = EDMA_ERR_LNK_CTRL_RX_0 |
EDMA_ERR_LNK_CTRL_RX_1 |
EDMA_ERR_LNK_CTRL_RX_3 |
- EDMA_ERR_LNK_CTRL_TX,
+ EDMA_ERR_LNK_CTRL_TX |
+ /* temporary, until we fix hotplug: */
+ (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON),
EDMA_EH_FREEZE = EDMA_ERR_D_PAR |
EDMA_ERR_PRD_PAR |
@@ -298,6 +316,7 @@
EDMA_ERR_LNK_DATA_RX |
EDMA_ERR_LNK_DATA_TX |
EDMA_ERR_TRANS_PROTO,
+
EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR |
EDMA_ERR_PRD_PAR |
EDMA_ERR_DEV_DCON |
@@ -344,7 +363,6 @@
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
- MV_PP_FLAG_HAD_A_RESET = (1 << 2), /* 1st hard reset complete? */
};
#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
@@ -461,7 +479,6 @@
void (*reset_bus)(struct ata_host *host, void __iomem *mmio);
};
-static void mv_irq_clear(struct ata_port *ap);
static int mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
static int mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
static int mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in, u32 *val);
@@ -471,7 +488,8 @@
static void mv_qc_prep(struct ata_queued_cmd *qc);
static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
-static void mv_error_handler(struct ata_port *ap);
+static int mv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static void mv_eh_freeze(struct ata_port *ap);
static void mv_eh_thaw(struct ata_port *ap);
static void mv6_dev_config(struct ata_device *dev);
@@ -504,72 +522,46 @@
void __iomem *mmio);
static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
-static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
-static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv,
- void __iomem *port_mmio, int want_ncq);
-static int __mv_stop_dma(struct ata_port *ap);
+static int mv_stop_edma(struct ata_port *ap);
+static int mv_stop_edma_engine(void __iomem *port_mmio);
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
+
+static void mv_pmp_select(struct ata_port *ap, int pmp);
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
* because we have to allow room for worst case splitting of
* PRDs for 64K boundaries in mv_fill_sg().
*/
static struct scsi_host_template mv5_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = MV_MAX_SG_CT / 2,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = 1,
- .proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
static struct scsi_host_template mv6_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .change_queue_depth = ata_scsi_change_queue_depth,
+ ATA_NCQ_SHT(DRV_NAME),
.can_queue = MV_MAX_Q_DEPTH - 1,
- .this_id = ATA_SHT_THIS_ID,
.sg_tablesize = MV_MAX_SG_CT / 2,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = 1,
- .proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations mv5_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .cable_detect = ata_cable_sata,
+static struct ata_port_operations mv5_ops = {
+ .inherits = &ata_sff_port_ops,
.qc_prep = mv_qc_prep,
.qc_issue = mv_qc_issue,
- .data_xfer = ata_data_xfer,
- .irq_clear = mv_irq_clear,
- .irq_on = ata_irq_on,
-
- .error_handler = mv_error_handler,
.freeze = mv_eh_freeze,
.thaw = mv_eh_thaw,
+ .hardreset = mv_hardreset,
+ .error_handler = ata_std_error_handler, /* avoid SFF EH */
+ .post_internal_cmd = ATA_OP_NULL,
.scr_read = mv5_scr_read,
.scr_write = mv5_scr_write,
@@ -578,61 +570,24 @@
.port_stop = mv_port_stop,
};
-static const struct ata_port_operations mv6_ops = {
+static struct ata_port_operations mv6_ops = {
+ .inherits = &mv5_ops,
+ .qc_defer = sata_pmp_qc_defer_cmd_switch,
.dev_config = mv6_dev_config,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .cable_detect = ata_cable_sata,
-
- .qc_prep = mv_qc_prep,
- .qc_issue = mv_qc_issue,
- .data_xfer = ata_data_xfer,
-
- .irq_clear = mv_irq_clear,
- .irq_on = ata_irq_on,
-
- .error_handler = mv_error_handler,
- .freeze = mv_eh_freeze,
- .thaw = mv_eh_thaw,
- .qc_defer = ata_std_qc_defer,
-
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
- .port_start = mv_port_start,
- .port_stop = mv_port_stop,
+ .pmp_hardreset = mv_pmp_hardreset,
+ .pmp_softreset = mv_softreset,
+ .softreset = mv_softreset,
+ .error_handler = sata_pmp_error_handler,
};
-static const struct ata_port_operations mv_iie_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .cable_detect = ata_cable_sata,
-
+static struct ata_port_operations mv_iie_ops = {
+ .inherits = &mv6_ops,
+ .qc_defer = ata_std_qc_defer, /* FIS-based switching */
+ .dev_config = ATA_OP_NULL,
.qc_prep = mv_qc_prep_iie,
- .qc_issue = mv_qc_issue,
- .data_xfer = ata_data_xfer,
-
- .irq_clear = mv_irq_clear,
- .irq_on = ata_irq_on,
-
- .error_handler = mv_error_handler,
- .freeze = mv_eh_freeze,
- .thaw = mv_eh_thaw,
- .qc_defer = ata_std_qc_defer,
-
- .scr_read = mv_scr_read,
- .scr_write = mv_scr_write,
-
- .port_start = mv_port_start,
- .port_stop = mv_port_stop,
};
static const struct ata_port_info mv_port_info[] = {
@@ -656,6 +611,7 @@
},
{ /* chip_604x */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
@@ -663,6 +619,7 @@
},
{ /* chip_608x */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
ATA_FLAG_NCQ | MV_FLAG_DUAL_HC,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
@@ -670,6 +627,7 @@
},
{ /* chip_6042 */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
@@ -677,16 +635,19 @@
},
{ /* chip_7042 */
.flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
ATA_FLAG_NCQ,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
},
{ /* chip_soc */
- .flags = MV_COMMON_FLAGS | MV_FLAG_SOC,
- .pio_mask = 0x1f, /* pio0-4 */
- .udma_mask = ATA_UDMA6,
- .port_ops = &mv_iie_ops,
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ | MV_FLAG_SOC,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &mv_iie_ops,
},
};
@@ -785,6 +746,14 @@
(mv_hardport_from_port(port) * MV_PORT_REG_SZ);
}
+static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
+{
+ void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
+ unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
+
+ return hc_mmio + ofs;
+}
+
static inline void __iomem *mv_host_base(struct ata_host *host)
{
struct mv_host_priv *hpriv = host->private_data;
@@ -801,10 +770,6 @@
return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
}
-static void mv_irq_clear(struct ata_port *ap)
-{
-}
-
static void mv_set_edma_ptrs(void __iomem *port_mmio,
struct mv_host_priv *hpriv,
struct mv_port_priv *pp)
@@ -864,7 +829,7 @@
if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
int using_ncq = ((pp->pp_flags & MV_PP_FLAG_NCQ_EN) != 0);
if (want_ncq != using_ncq)
- __mv_stop_dma(ap);
+ mv_stop_edma(ap);
}
if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
struct mv_host_priv *hpriv = ap->host->private_data;
@@ -885,7 +850,7 @@
hc_mmio + HC_IRQ_CAUSE_OFS);
}
- mv_edma_cfg(pp, hpriv, port_mmio, want_ncq);
+ mv_edma_cfg(ap, want_ncq);
/* clear FIS IRQ Cause */
writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
@@ -899,58 +864,42 @@
}
/**
- * __mv_stop_dma - Disable eDMA engine
- * @ap: ATA channel to manipulate
- *
- * Verify the local cache of the eDMA state is accurate with a
- * WARN_ON.
+ * mv_stop_edma_engine - Disable eDMA engine
+ * @port_mmio: io base address
*
* LOCKING:
* Inherited from caller.
*/
-static int __mv_stop_dma(struct ata_port *ap)
+static int mv_stop_edma_engine(void __iomem *port_mmio)
{
- void __iomem *port_mmio = mv_ap_base(ap);
- struct mv_port_priv *pp = ap->private_data;
- u32 reg;
- int i, err = 0;
+ int i;
- if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
- /* Disable EDMA if active. The disable bit auto clears.
- */
- writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
- pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
- } else {
- WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS));
- }
+ /* Disable eDMA. The disable bit auto clears. */
+ writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
- /* now properly wait for the eDMA to stop */
- for (i = 1000; i > 0; i--) {
- reg = readl(port_mmio + EDMA_CMD_OFS);
+ /* Wait for the chip to confirm eDMA is off. */
+ for (i = 10000; i > 0; i--) {
+ u32 reg = readl(port_mmio + EDMA_CMD_OFS);
if (!(reg & EDMA_EN))
- break;
-
- udelay(100);
+ return 0;
+ udelay(10);
}
-
- if (reg & EDMA_EN) {
- ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
- err = -EIO;
- }
-
- return err;
+ return -EIO;
}
-static int mv_stop_dma(struct ata_port *ap)
+static int mv_stop_edma(struct ata_port *ap)
{
- unsigned long flags;
- int rc;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
- spin_lock_irqsave(&ap->host->lock, flags);
- rc = __mv_stop_dma(ap);
- spin_unlock_irqrestore(&ap->host->lock, flags);
-
- return rc;
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
+ return 0;
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ if (mv_stop_edma_engine(port_mmio)) {
+ ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
+ return -EIO;
+ }
+ return 0;
}
#ifdef ATA_DEBUG
@@ -1074,18 +1023,50 @@
static void mv6_dev_config(struct ata_device *adev)
{
/*
+ * Deal with Gen-II ("mv6") hardware quirks/restrictions:
+ *
+ * Gen-II does not support NCQ over a port multiplier
+ * (no FIS-based switching).
+ *
* We don't have hob_nsect when doing NCQ commands on Gen-II.
* See mv_qc_prep() for more info.
*/
- if (adev->flags & ATA_DFLAG_NCQ)
- if (adev->max_sectors > ATA_MAX_SECTORS)
+ if (adev->flags & ATA_DFLAG_NCQ) {
+ if (sata_pmp_attached(adev->link->ap))
+ adev->flags &= ~ATA_DFLAG_NCQ;
+ else if (adev->max_sectors > ATA_MAX_SECTORS)
adev->max_sectors = ATA_MAX_SECTORS;
+ }
}
-static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv,
- void __iomem *port_mmio, int want_ncq)
+static void mv_config_fbs(void __iomem *port_mmio, int enable_fbs)
+{
+ u32 old_fcfg, new_fcfg, old_ltmode, new_ltmode;
+ /*
+ * Various bit settings required for operation
+ * in FIS-based switching (fbs) mode on GenIIe:
+ */
+ old_fcfg = readl(port_mmio + FIS_CFG_OFS);
+ old_ltmode = readl(port_mmio + LTMODE_OFS);
+ if (enable_fbs) {
+ new_fcfg = old_fcfg | FIS_CFG_SINGLE_SYNC;
+ new_ltmode = old_ltmode | LTMODE_BIT8;
+ } else { /* disable fbs */
+ new_fcfg = old_fcfg & ~FIS_CFG_SINGLE_SYNC;
+ new_ltmode = old_ltmode & ~LTMODE_BIT8;
+ }
+ if (new_fcfg != old_fcfg)
+ writelfl(new_fcfg, port_mmio + FIS_CFG_OFS);
+ if (new_ltmode != old_ltmode)
+ writelfl(new_ltmode, port_mmio + LTMODE_OFS);
+}
+
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
{
u32 cfg;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ void __iomem *port_mmio = mv_ap_base(ap);
/* set up non-NCQ EDMA configuration */
cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */
@@ -1101,6 +1082,13 @@
cfg |= (1 << 22); /* enab 4-entry host queue cache */
cfg |= (1 << 18); /* enab early completion */
cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */
+
+ if (want_ncq && sata_pmp_attached(ap)) {
+ cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */
+ mv_config_fbs(port_mmio, 1);
+ } else {
+ mv_config_fbs(port_mmio, 0);
+ }
}
if (want_ncq) {
@@ -1156,8 +1144,6 @@
struct device *dev = ap->host->dev;
struct mv_host_priv *hpriv = ap->host->private_data;
struct mv_port_priv *pp;
- void __iomem *port_mmio = mv_ap_base(ap);
- unsigned long flags;
int tag;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
@@ -1190,18 +1176,6 @@
pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
}
}
-
- spin_lock_irqsave(&ap->host->lock, flags);
-
- mv_edma_cfg(pp, hpriv, port_mmio, 0);
- mv_set_edma_ptrs(port_mmio, hpriv, pp);
-
- spin_unlock_irqrestore(&ap->host->lock, flags);
-
- /* Don't turn on EDMA here...do it before DMA commands only. Else
- * we'll be unable to send non-data, PIO, etc due to restricted access
- * to shadow regs.
- */
return 0;
out_port_free_dma_mem:
@@ -1220,7 +1194,7 @@
*/
static void mv_port_stop(struct ata_port *ap)
{
- mv_stop_dma(ap);
+ mv_stop_edma(ap);
mv_port_free_dma_mem(ap);
}
@@ -1306,6 +1280,7 @@
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
+ flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
/* get current queue index from software */
in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
@@ -1390,14 +1365,14 @@
(qc->tf.protocol != ATA_PROT_NCQ))
return;
- /* Fill in Gen IIE command request block
- */
+ /* Fill in Gen IIE command request block */
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
flags |= qc->tag << CRQB_HOSTQ_SHIFT;
+ flags |= (qc->dev->link->pmp & 0xf) << CRQB_PMP_SHIFT;
/* get current queue index from software */
in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
@@ -1455,12 +1430,14 @@
if ((qc->tf.protocol != ATA_PROT_DMA) &&
(qc->tf.protocol != ATA_PROT_NCQ)) {
- /* We're about to send a non-EDMA capable command to the
+ /*
+ * We're about to send a non-EDMA capable command to the
* port. Turn off EDMA so there won't be problems accessing
* shadow block, etc registers.
*/
- __mv_stop_dma(ap);
- return ata_qc_issue_prot(qc);
+ mv_stop_edma(ap);
+ mv_pmp_select(ap, qc->dev->link->pmp);
+ return ata_sff_qc_issue(qc);
}
mv_start_dma(ap, port_mmio, pp, qc->tf.protocol);
@@ -1482,10 +1459,10 @@
* @reset_allowed: bool: 0 == don't trigger from reset here
*
* In most cases, just clear the interrupt and move on. However,
- * some cases require an eDMA reset, which is done right before
- * the COMRESET in mv_phy_reset(). The SERR case requires a
- * clear of pending errors in the SATA SERROR register. Finally,
- * if the port disabled DMA, update our cached copy to match.
+ * some cases require an eDMA reset, which also performs a COMRESET.
+ * The SERR case requires a clear of pending errors in the SATA
+ * SERROR register. Finally, if the port disabled DMA,
+ * update our cached copy to match.
*
* LOCKING:
* Inherited from caller.
@@ -1524,14 +1501,14 @@
EDMA_ERR_CRQB_PAR | EDMA_ERR_CRPB_PAR |
EDMA_ERR_INTRL_PAR)) {
err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_HARDRESET;
+ action |= ATA_EH_RESET;
ata_ehi_push_desc(ehi, "parity error");
}
if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
ata_ehi_hotplugged(ehi);
ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
"dev disconnect" : "dev connect");
- action |= ATA_EH_HARDRESET;
+ action |= ATA_EH_RESET;
}
if (IS_GEN_I(hpriv)) {
@@ -1555,7 +1532,7 @@
sata_scr_read(&ap->link, SCR_ERROR, &serr);
sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
err_mask = AC_ERR_ATA_BUS;
- action |= ATA_EH_HARDRESET;
+ action |= ATA_EH_RESET;
}
}
@@ -1564,7 +1541,7 @@
if (!err_mask) {
err_mask = AC_ERR_OTHER;
- action |= ATA_EH_HARDRESET;
+ action |= ATA_EH_RESET;
}
ehi->serror |= serr;
@@ -1723,9 +1700,9 @@
pp = ap->private_data;
shift = port << 1; /* (port * 2) */
- if (port >= MV_PORTS_PER_HC) {
+ if (port >= MV_PORTS_PER_HC)
shift++; /* skip bit 8 in the HC Main IRQ reg */
- }
+
have_err_bits = ((PORT0_ERR << shift) & relevant);
if (unlikely(have_err_bits)) {
@@ -1780,7 +1757,7 @@
ata_ehi_push_desc(ehi,
"PCI err cause 0x%08x", err_cause);
err_mask = AC_ERR_HOST_BUS;
- ehi->action = ATA_EH_HARDRESET;
+ ehi->action = ATA_EH_RESET;
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc)
qc->err_mask |= err_mask;
@@ -1814,6 +1791,7 @@
void __iomem *mmio = hpriv->base;
u32 irq_stat, irq_mask;
+ /* Note to self: &host->lock == &ap->host->lock == ap->lock */
spin_lock(&host->lock);
irq_stat = readl(hpriv->main_cause_reg_addr);
@@ -1847,14 +1825,6 @@
return IRQ_RETVAL(handled);
}
-static void __iomem *mv5_phy_base(void __iomem *mmio, unsigned int port)
-{
- void __iomem *hc_mmio = mv_hc_base_from_port(mmio, port);
- unsigned long ofs = (mv_hardport_from_port(port) + 1) * 0x100UL;
-
- return hc_mmio + ofs;
-}
-
static unsigned int mv5_scr_offset(unsigned int sc_reg_in)
{
unsigned int ofs;
@@ -1980,9 +1950,12 @@
{
void __iomem *port_mmio = mv_port_base(mmio, port);
- writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
-
- mv_channel_reset(hpriv, mmio, port);
+ /*
+ * The datasheet warns against setting ATA_RST when EDMA is active
+ * (but doesn't say what the problem might be). So we first try
+ * to disable the EDMA engine before doing the ATA_RST operation.
+ */
+ mv_reset_channel(hpriv, mmio, port);
ZERO(0x028); /* command */
writel(0x11f, port_mmio + EDMA_CFG_OFS);
@@ -2132,6 +2105,13 @@
printk(KERN_ERR DRV_NAME ": can't clear global reset\n");
rc = 1;
}
+ /*
+ * Temporary: wait 3 seconds before port-probing can happen,
+ * so that we don't miss finding sleepy SilXXXX port-multipliers.
+ * This can go away once hotplug is fully/correctly implemented.
+ */
+ if (rc == 0)
+ msleep(3000);
done:
return rc;
}
@@ -2200,14 +2180,15 @@
m4 = readl(port_mmio + PHY_MODE4);
if (hp_flags & MV_HP_ERRATA_60X1B2)
- tmp = readl(port_mmio + 0x310);
+ tmp = readl(port_mmio + PHY_MODE3);
+ /* workaround for errata FEr SATA#10 (part 1) */
m4 = (m4 & ~(1 << 1)) | (1 << 0);
writel(m4, port_mmio + PHY_MODE4);
if (hp_flags & MV_HP_ERRATA_60X1B2)
- writel(tmp, port_mmio + 0x310);
+ writel(tmp, port_mmio + PHY_MODE3);
}
/* Revert values of pre-emphasis and signal amps to the saved ones */
@@ -2255,9 +2236,12 @@
{
void __iomem *port_mmio = mv_port_base(mmio, port);
- writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
-
- mv_channel_reset(hpriv, mmio, port);
+ /*
+ * The datasheet warns against setting ATA_RST when EDMA is active
+ * (but doesn't say what the problem might be). So we first try
+ * to disable the EDMA engine before doing the ATA_RST operation.
+ */
+ mv_reset_channel(hpriv, mmio, port);
ZERO(0x028); /* command */
writel(0x101f, port_mmio + EDMA_CFG_OFS);
@@ -2314,25 +2298,39 @@
return;
}
-static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
+static void mv_setup_ifctl(void __iomem *port_mmio, int want_gen2i)
+{
+ u32 ifctl = readl(port_mmio + SATA_INTERFACE_CFG);
+
+ ifctl = (ifctl & 0xf7f) | 0x9b1000; /* from chip spec */
+ if (want_gen2i)
+ ifctl |= (1 << 7); /* enable gen2i speed */
+ writelfl(ifctl, port_mmio + SATA_INTERFACE_CFG);
+}
+
+/*
+ * Caller must ensure that EDMA is not active,
+ * by first doing mv_stop_edma() where needed.
+ */
+static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no)
{
void __iomem *port_mmio = mv_port_base(mmio, port_no);
+ mv_stop_edma_engine(port_mmio);
writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
- if (IS_GEN_II(hpriv)) {
- u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
- ifctl |= (1 << 7); /* enable gen2i speed */
- ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
- writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
+ if (!IS_GEN_I(hpriv)) {
+ /* Enable 3.0gb/s link speed */
+ mv_setup_ifctl(port_mmio, 1);
}
-
- udelay(25); /* allow reset propagation */
-
- /* Spec never mentions clearing the bit. Marvell's driver does
- * clear the bit, however.
+ /*
+ * Strobing ATA_RST here causes a hard reset of the SATA transport,
+ * link, and physical layers. It resets all SATA interface registers
+ * (except for SATA_INTERFACE_CFG), and issues a COMRESET to the dev.
*/
+ writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
+ udelay(25); /* allow reset propagation */
writelfl(0, port_mmio + EDMA_CMD_OFS);
hpriv->ops->phy_errata(hpriv, mmio, port_no);
@@ -2341,136 +2339,32 @@
mdelay(1);
}
-/**
- * mv_phy_reset - Perform eDMA reset followed by COMRESET
- * @ap: ATA channel to manipulate
- *
- * Part of this is taken from __sata_phy_reset and modified to
- * not sleep since this routine gets called from interrupt level.
- *
- * LOCKING:
- * Inherited from caller. This is coded to safe to call at
- * interrupt level, i.e. it does not sleep.
- */
-static void mv_phy_reset(struct ata_port *ap, unsigned int *class,
- unsigned long deadline)
+static void mv_pmp_select(struct ata_port *ap, int pmp)
{
- struct mv_port_priv *pp = ap->private_data;
- struct mv_host_priv *hpriv = ap->host->private_data;
- void __iomem *port_mmio = mv_ap_base(ap);
- int retry = 5;
- u32 sstatus;
+ if (sata_pmp_supported(ap)) {
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 reg = readl(port_mmio + SATA_IFCTL_OFS);
+ int old = reg & 0xf;
- VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio);
-
-#ifdef DEBUG
- {
- u32 sstatus, serror, scontrol;
-
- mv_scr_read(ap, SCR_STATUS, &sstatus);
- mv_scr_read(ap, SCR_ERROR, &serror);
- mv_scr_read(ap, SCR_CONTROL, &scontrol);
- DPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x "
- "SCtrl 0x%08x\n", sstatus, serror, scontrol);
+ if (old != pmp) {
+ reg = (reg & ~0xf) | pmp;
+ writelfl(reg, port_mmio + SATA_IFCTL_OFS);
+ }
}
-#endif
-
- /* Issue COMRESET via SControl */
-comreset_retry:
- sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x301);
- msleep(1);
-
- sata_scr_write_flush(&ap->link, SCR_CONTROL, 0x300);
- msleep(20);
-
- do {
- sata_scr_read(&ap->link, SCR_STATUS, &sstatus);
- if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0))
- break;
-
- msleep(1);
- } while (time_before(jiffies, deadline));
-
- /* work around errata */
- if (IS_GEN_II(hpriv) &&
- (sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) &&
- (retry-- > 0))
- goto comreset_retry;
-
-#ifdef DEBUG
- {
- u32 sstatus, serror, scontrol;
-
- mv_scr_read(ap, SCR_STATUS, &sstatus);
- mv_scr_read(ap, SCR_ERROR, &serror);
- mv_scr_read(ap, SCR_CONTROL, &scontrol);
- DPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x "
- "SCtrl 0x%08x\n", sstatus, serror, scontrol);
- }
-#endif
-
- if (ata_link_offline(&ap->link)) {
- *class = ATA_DEV_NONE;
- return;
- }
-
- /* even after SStatus reflects that device is ready,
- * it seems to take a while for link to be fully
- * established (and thus Status no longer 0x80/0x7F),
- * so we poll a bit for that, here.
- */
- retry = 20;
- while (1) {
- u8 drv_stat = ata_check_status(ap);
- if ((drv_stat != 0x80) && (drv_stat != 0x7f))
- break;
- msleep(500);
- if (retry-- <= 0)
- break;
- if (time_after(jiffies, deadline))
- break;
- }
-
- /* FIXME: if we passed the deadline, the following
- * code probably produces an invalid result
- */
-
- /* finally, read device signature from TF registers */
- *class = ata_dev_try_classify(ap->link.device, 1, NULL);
-
- writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
-
- WARN_ON(pp->pp_flags & MV_PP_FLAG_EDMA_EN);
-
- VPRINTK("EXIT\n");
}
-static int mv_prereset(struct ata_link *link, unsigned long deadline)
+static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
{
- struct ata_port *ap = link->ap;
- struct mv_port_priv *pp = ap->private_data;
- struct ata_eh_context *ehc = &link->eh_context;
- int rc;
+ mv_pmp_select(link->ap, sata_srst_pmp(link));
+ return sata_std_hardreset(link, class, deadline);
+}
- rc = mv_stop_dma(ap);
- if (rc)
- ehc->i.action |= ATA_EH_HARDRESET;
-
- if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET)) {
- pp->pp_flags |= MV_PP_FLAG_HAD_A_RESET;
- ehc->i.action |= ATA_EH_HARDRESET;
- }
-
- /* if we're about to do hardreset, nothing more to do */
- if (ehc->i.action & ATA_EH_HARDRESET)
- return 0;
-
- if (ata_link_online(link))
- rc = ata_wait_ready(ap, deadline);
- else
- rc = -ENODEV;
-
- return rc;
+static int mv_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ mv_pmp_select(link->ap, sata_srst_pmp(link));
+ return ata_sff_softreset(link, class, deadline);
}
static int mv_hardreset(struct ata_link *link, unsigned int *class,
@@ -2478,43 +2372,34 @@
{
struct ata_port *ap = link->ap;
struct mv_host_priv *hpriv = ap->host->private_data;
+ struct mv_port_priv *pp = ap->private_data;
void __iomem *mmio = hpriv->base;
+ int rc, attempts = 0, extra = 0;
+ u32 sstatus;
+ bool online;
- mv_stop_dma(ap);
+ mv_reset_channel(hpriv, mmio, ap->port_no);
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
- mv_channel_reset(hpriv, mmio, ap->port_no);
+ /* Workaround for errata FEr SATA#10 (part 2) */
+ do {
+ const unsigned long *timing =
+ sata_ehc_deb_timing(&link->eh_context);
- mv_phy_reset(ap, class, deadline);
+ rc = sata_link_hardreset(link, timing, deadline + extra,
+ &online, NULL);
+ if (rc)
+ return rc;
+ sata_scr_read(link, SCR_STATUS, &sstatus);
+ if (!IS_GEN_I(hpriv) && ++attempts >= 5 && sstatus == 0x121) {
+ /* Force 1.5gb/s link speed and try again */
+ mv_setup_ifctl(mv_ap_base(ap), 0);
+ if (time_after(jiffies + HZ, deadline))
+ extra = HZ; /* only extend it once, max */
+ }
+ } while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123);
- return 0;
-}
-
-static void mv_postreset(struct ata_link *link, unsigned int *classes)
-{
- struct ata_port *ap = link->ap;
- u32 serr;
-
- /* print link status */
- sata_print_link_status(link);
-
- /* clear SError */
- sata_scr_read(link, SCR_ERROR, &serr);
- sata_scr_write_flush(link, SCR_ERROR, serr);
-
- /* bail out if no device is present */
- if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
- DPRINTK("EXIT, no device\n");
- return;
- }
-
- /* set up device control */
- iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
-}
-
-static void mv_error_handler(struct ata_port *ap)
-{
- ata_do_eh(ap, mv_prereset, ata_std_softreset,
- mv_hardreset, mv_postreset);
+ return rc;
}
static void mv_eh_freeze(struct ata_port *ap)
@@ -2808,19 +2693,6 @@
hpriv->ops->enable_leds(hpriv, mmio);
for (port = 0; port < host->n_ports; port++) {
- if (IS_GEN_II(hpriv)) {
- void __iomem *port_mmio = mv_port_base(mmio, port);
-
- u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
- ifctl |= (1 << 7); /* enable gen2i speed */
- ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
- writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
- }
-
- hpriv->ops->phy_errata(hpriv, mmio, port);
- }
-
- for (port = 0; port < host->n_ports; port++) {
struct ata_port *ap = host->ports[port];
void __iomem *port_mmio = mv_port_base(mmio, port);
@@ -3192,7 +3064,7 @@
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-MODULE_ALIAS("platform:sata_mv");
+MODULE_ALIAS("platform:" DRV_NAME);
#ifdef CONFIG_PCI
module_param(msi, int, 0444);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index ed5473b..109b074 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -309,7 +309,8 @@
static void nv_nf2_thaw(struct ata_port *ap);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
-static void nv_error_handler(struct ata_port *ap);
+static int nv_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static int nv_adma_slave_config(struct scsi_device *sdev);
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -385,157 +386,60 @@
};
static struct scsi_host_template nv_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct scsi_host_template nv_adma_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .change_queue_depth = ata_scsi_change_queue_depth,
+ ATA_NCQ_SHT(DRV_NAME),
.can_queue = NV_ADMA_MAX_CPBS,
- .this_id = ATA_SHT_THIS_ID,
.sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = NV_ADMA_DMA_BOUNDARY,
.slave_configure = nv_adma_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
static struct scsi_host_template nv_swncq_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .change_queue_depth = ata_scsi_change_queue_depth,
+ ATA_NCQ_SHT(DRV_NAME),
.can_queue = ATA_MAX_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = nv_swncq_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations nv_generic_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = nv_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .data_xfer = ata_data_xfer,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
+static struct ata_port_operations nv_generic_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .hardreset = nv_hardreset,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
- .port_start = ata_port_start,
};
-static const struct ata_port_operations nv_nf2_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
+static struct ata_port_operations nv_nf2_ops = {
+ .inherits = &nv_generic_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
- .error_handler = nv_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .data_xfer = ata_data_xfer,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .scr_read = nv_scr_read,
- .scr_write = nv_scr_write,
- .port_start = ata_port_start,
};
-static const struct ata_port_operations nv_ck804_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
+static struct ata_port_operations nv_ck804_ops = {
+ .inherits = &nv_generic_ops,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
- .error_handler = nv_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .data_xfer = ata_data_xfer,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .scr_read = nv_scr_read,
- .scr_write = nv_scr_write,
- .port_start = ata_port_start,
.host_stop = nv_ck804_host_stop,
};
-static const struct ata_port_operations nv_adma_ops = {
- .tf_load = ata_tf_load,
- .tf_read = nv_adma_tf_read,
+static struct ata_port_operations nv_adma_ops = {
+ .inherits = &nv_generic_ops,
+
.check_atapi_dma = nv_adma_check_atapi_dma,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
+ .sff_tf_read = nv_adma_tf_read,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_adma_qc_prep,
.qc_issue = nv_adma_qc_issue,
+ .sff_irq_clear = nv_adma_irq_clear,
+
.freeze = nv_adma_freeze,
.thaw = nv_adma_thaw,
.error_handler = nv_adma_error_handler,
.post_internal_cmd = nv_adma_post_internal_cmd,
- .data_xfer = ata_data_xfer,
- .irq_clear = nv_adma_irq_clear,
- .irq_on = ata_irq_on,
- .scr_read = nv_scr_read,
- .scr_write = nv_scr_write,
+
.port_start = nv_adma_port_start,
.port_stop = nv_adma_port_stop,
#ifdef CONFIG_PM
@@ -545,28 +449,17 @@
.host_stop = nv_adma_host_stop,
};
-static const struct ata_port_operations nv_swncq_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
+static struct ata_port_operations nv_swncq_ops = {
+ .inherits = &nv_generic_ops,
+
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
.qc_issue = nv_swncq_qc_issue,
+
.freeze = nv_mcp55_freeze,
.thaw = nv_mcp55_thaw,
.error_handler = nv_swncq_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .data_xfer = ata_data_xfer,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .scr_read = nv_scr_read,
- .scr_write = nv_scr_write,
+
#ifdef CONFIG_PM
.port_suspend = nv_swncq_port_suspend,
.port_resume = nv_swncq_port_resume,
@@ -574,63 +467,61 @@
.port_start = nv_swncq_port_start,
};
+struct nv_pi_priv {
+ irq_handler_t irq_handler;
+ struct scsi_host_template *sht;
+};
+
+#define NV_PI_PRIV(_irq_handler, _sht) \
+ &(struct nv_pi_priv){ .irq_handler = _irq_handler, .sht = _sht }
+
static const struct ata_port_info nv_port_info[] = {
/* generic */
{
- .sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_generic_ops,
- .irq_handler = nv_generic_interrupt,
+ .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
},
/* nforce2/3 */
{
- .sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_nf2_ops,
- .irq_handler = nv_nf2_interrupt,
+ .private_data = NV_PI_PRIV(nv_nf2_interrupt, &nv_sht),
},
/* ck804 */
{
- .sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_ck804_ops,
- .irq_handler = nv_ck804_interrupt,
+ .private_data = NV_PI_PRIV(nv_ck804_interrupt, &nv_sht),
},
/* ADMA */
{
- .sht = &nv_adma_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NCQ,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_adma_ops,
- .irq_handler = nv_adma_interrupt,
+ .private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
},
/* SWNCQ */
{
- .sht = &nv_swncq_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_NCQ,
- .link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_swncq_ops,
- .irq_handler = nv_swncq_interrupt,
+ .private_data = NV_PI_PRIV(nv_swncq_interrupt, &nv_swncq_sht),
},
};
@@ -640,8 +531,8 @@
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-static int adma_enabled = 1;
-static int swncq_enabled;
+static int adma_enabled;
+static int swncq_enabled = 1;
static void nv_adma_register_mode(struct ata_port *ap)
{
@@ -839,7 +730,7 @@
ADMA mode could abort outstanding commands. */
nv_adma_register_mode(ap);
- ata_tf_read(ap, tf);
+ ata_sff_tf_read(ap, tf);
}
static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
@@ -929,7 +820,7 @@
"notifier for tag %d with no cmd?\n",
cpb_num);
ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
return 1;
}
@@ -953,12 +844,12 @@
/* DEV interrupt w/ no active qc? */
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
- ata_check_status(ap);
+ ata_sff_check_status(ap);
return 1;
}
/* handle interrupt */
- return ata_host_intr(ap, qc);
+ return ata_sff_host_intr(ap, qc);
}
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
@@ -1137,7 +1028,7 @@
u32 notifier_clears[2];
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
- ata_bmdma_irq_clear(ap);
+ ata_sff_irq_clear(ap);
return;
}
@@ -1168,7 +1059,7 @@
struct nv_adma_port_priv *pp = qc->ap->private_data;
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
- ata_bmdma_post_internal_cmd(qc);
+ ata_sff_post_internal_cmd(qc);
}
static int nv_adma_port_start(struct ata_port *ap)
@@ -1445,7 +1336,7 @@
BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
(qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
- ata_qc_prep(qc);
+ ata_sff_qc_prep(qc);
return;
}
@@ -1504,7 +1395,7 @@
BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
(qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
} else
nv_adma_mode(qc->ap);
@@ -1545,11 +1436,11 @@
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled += ata_host_intr(ap, qc);
+ handled += ata_sff_host_intr(ap, qc);
else
// No request pending? Clear interrupt status
// anyway, in case there's one pending.
- ap->ops->check_status(ap);
+ ap->ops->sff_check_status(ap);
}
}
@@ -1680,7 +1571,7 @@
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask &= ~(NV_INT_ALL_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
- ata_bmdma_freeze(ap);
+ ata_sff_freeze(ap);
}
static void nv_mcp55_thaw(struct ata_port *ap)
@@ -1694,7 +1585,7 @@
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask |= (NV_INT_MASK_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
- ata_bmdma_thaw(ap);
+ ata_sff_thaw(ap);
}
static int nv_hardreset(struct ata_link *link, unsigned int *class,
@@ -1706,13 +1597,7 @@
* some controllers. Don't classify on hardreset. For more
* info, see http://bugzilla.kernel.org/show_bug.cgi?id=3352
*/
- return sata_std_hardreset(link, &dummy, deadline);
-}
-
-static void nv_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
- nv_hardreset, ata_std_postreset);
+ return sata_sff_hardreset(link, &dummy, deadline);
}
static void nv_adma_error_handler(struct ata_port *ap)
@@ -1768,8 +1653,7 @@
readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
- nv_hardreset, ata_std_postreset);
+ ata_sff_error_handler(ap);
}
static void nv_swncq_qc_to_dq(struct ata_port *ap, struct ata_queued_cmd *qc)
@@ -1855,7 +1739,7 @@
pp->dhfis_bits, pp->dmafis_bits, pp->sdbfis_bits);
ata_port_printk(ap, KERN_ERR, "ATA_REG 0x%X ERR_REG 0x%X\n",
- ap->ops->check_status(ap),
+ ap->ops->sff_check_status(ap),
ioread8(ap->ioaddr.error_addr));
sactive = readl(pp->sactive_block);
@@ -1881,7 +1765,7 @@
}
nv_swncq_pp_reinit(ap);
- ap->ops->irq_clear(ap);
+ ap->ops->sff_irq_clear(ap);
__ata_bmdma_stop(ap);
nv_swncq_irq_clear(ap, 0xffff);
}
@@ -1892,11 +1776,10 @@
if (ap->link.sactive) {
nv_swncq_ncq_stop(ap);
- ehc->i.action |= ATA_EH_HARDRESET;
+ ehc->i.action |= ATA_EH_RESET;
}
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
- nv_hardreset, ata_std_postreset);
+ ata_sff_error_handler(ap);
}
#ifdef CONFIG_PM
@@ -2042,7 +1925,7 @@
static void nv_swncq_qc_prep(struct ata_queued_cmd *qc)
{
if (qc->tf.protocol != ATA_PROT_NCQ) {
- ata_qc_prep(qc);
+ ata_sff_qc_prep(qc);
return;
}
@@ -2104,8 +1987,8 @@
pp->dmafis_bits &= ~(1 << qc->tag);
pp->qc_active |= (0x1 << qc->tag);
- ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
- ap->ops->exec_command(ap, &qc->tf);
+ ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
+ ap->ops->sff_exec_command(ap, &qc->tf);
DPRINTK("Issued tag %u\n", qc->tag);
@@ -2118,7 +2001,7 @@
struct nv_swncq_port_priv *pp = ap->private_data;
if (qc->tf.protocol != ATA_PROT_NCQ)
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
DPRINTK("Enter\n");
@@ -2173,11 +2056,11 @@
ata_ehi_clear_desc(ehi);
ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
ehi->err_mask |= AC_ERR_HOST_BUS;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->action |= ATA_EH_RESET;
return -EINVAL;
}
- ap->ops->irq_clear(ap);
+ ap->ops->sff_irq_clear(ap);
__ata_bmdma_stop(ap);
sactive = readl(pp->sactive_block);
@@ -2188,7 +2071,7 @@
ata_ehi_push_desc(ehi, "illegal SWNCQ:qc_active transition"
"(%08x->%08x)", pp->qc_active, sactive);
ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_HARDRESET;
+ ehi->action |= ATA_EH_RESET;
return -EINVAL;
}
for (i = 0; i < ATA_MAX_QUEUE; i++) {
@@ -2299,7 +2182,7 @@
u8 ata_stat;
int rc = 0;
- ata_stat = ap->ops->check_status(ap);
+ ata_stat = ap->ops->sff_check_status(ap);
nv_swncq_irq_clear(ap, fis);
if (!fis)
return;
@@ -2324,7 +2207,7 @@
ata_ehi_push_desc(ehi, "Ata error. fis:0x%X", fis);
ehi->err_mask |= AC_ERR_DEV;
ehi->serror |= serror;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
return;
}
@@ -2356,13 +2239,13 @@
if (pp->ncq_flags & (ncq_saw_sdb | ncq_saw_backout)) {
ata_ehi_push_desc(ehi, "illegal fis transaction");
ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_HARDRESET;
+ ehi->action |= ATA_EH_RESET;
goto irq_error;
}
if (!(fis & NV_SWNCQ_IRQ_DMASETUP) &&
!(pp->ncq_flags & ncq_saw_dmas)) {
- ata_stat = ap->ops->check_status(ap);
+ ata_stat = ap->ops->sff_check_status(ap);
if (ata_stat & ATA_BUSY)
goto irq_exit;
@@ -2429,6 +2312,7 @@
{
static int printed_version;
const struct ata_port_info *ppi[] = { NULL, NULL };
+ struct nv_pi_priv *ipriv;
struct ata_host *host;
struct nv_host_priv *hpriv;
int rc;
@@ -2465,7 +2349,8 @@
}
ppi[0] = &nv_port_info[type];
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ ipriv = ppi[0]->private_data;
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
@@ -2503,8 +2388,8 @@
nv_swncq_host_init(host);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler,
- IRQF_SHARED, ppi[0]->sht);
+ return ata_host_activate(host, pdev->irq, ipriv->irq_handler,
+ IRQF_SHARED, ipriv->sht);
}
#ifdef CONFIG_PM
@@ -2600,5 +2485,5 @@
module_param_named(adma, adma_enabled, bool, 0444);
MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
module_param_named(swncq, swncq_enabled, bool, 0444);
-MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: false)");
+MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 11c1afe..5a10dc5 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -143,103 +143,57 @@
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc);
static void pdc_irq_clear(struct ata_port *ap);
-static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
+static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc);
static void pdc_freeze(struct ata_port *ap);
static void pdc_sata_freeze(struct ata_port *ap);
static void pdc_thaw(struct ata_port *ap);
static void pdc_sata_thaw(struct ata_port *ap);
-static void pdc_pata_error_handler(struct ata_port *ap);
-static void pdc_sata_error_handler(struct ata_port *ap);
+static void pdc_error_handler(struct ata_port *ap);
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
static int pdc_pata_cable_detect(struct ata_port *ap);
static int pdc_sata_cable_detect(struct ata_port *ap);
static struct scsi_host_template pdc_ata_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = PDC_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations pdc_sata_ops = {
- .tf_load = pdc_tf_load_mmio,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = pdc_exec_command_mmio,
- .dev_select = ata_std_dev_select,
- .check_atapi_dma = pdc_check_atapi_dma,
+static const struct ata_port_operations pdc_common_ops = {
+ .inherits = &ata_sff_port_ops,
+ .sff_tf_load = pdc_tf_load_mmio,
+ .sff_exec_command = pdc_exec_command_mmio,
+ .check_atapi_dma = pdc_check_atapi_dma,
.qc_prep = pdc_qc_prep,
- .qc_issue = pdc_qc_issue_prot,
+ .qc_issue = pdc_qc_issue,
+ .sff_irq_clear = pdc_irq_clear,
+
+ .post_internal_cmd = pdc_post_internal_cmd,
+ .error_handler = pdc_error_handler,
+};
+
+static struct ata_port_operations pdc_sata_ops = {
+ .inherits = &pdc_common_ops,
+ .cable_detect = pdc_sata_cable_detect,
.freeze = pdc_sata_freeze,
.thaw = pdc_sata_thaw,
- .error_handler = pdc_sata_error_handler,
- .post_internal_cmd = pdc_post_internal_cmd,
- .cable_detect = pdc_sata_cable_detect,
- .data_xfer = ata_data_xfer,
- .irq_clear = pdc_irq_clear,
- .irq_on = ata_irq_on,
-
.scr_read = pdc_sata_scr_read,
.scr_write = pdc_sata_scr_write,
.port_start = pdc_sata_port_start,
};
/* First-generation chips need a more restrictive ->check_atapi_dma op */
-static const struct ata_port_operations pdc_old_sata_ops = {
- .tf_load = pdc_tf_load_mmio,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = pdc_exec_command_mmio,
- .dev_select = ata_std_dev_select,
+static struct ata_port_operations pdc_old_sata_ops = {
+ .inherits = &pdc_sata_ops,
.check_atapi_dma = pdc_old_sata_check_atapi_dma,
-
- .qc_prep = pdc_qc_prep,
- .qc_issue = pdc_qc_issue_prot,
- .freeze = pdc_sata_freeze,
- .thaw = pdc_sata_thaw,
- .error_handler = pdc_sata_error_handler,
- .post_internal_cmd = pdc_post_internal_cmd,
- .cable_detect = pdc_sata_cable_detect,
- .data_xfer = ata_data_xfer,
- .irq_clear = pdc_irq_clear,
- .irq_on = ata_irq_on,
-
- .scr_read = pdc_sata_scr_read,
- .scr_write = pdc_sata_scr_write,
- .port_start = pdc_sata_port_start,
};
-static const struct ata_port_operations pdc_pata_ops = {
- .tf_load = pdc_tf_load_mmio,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = pdc_exec_command_mmio,
- .dev_select = ata_std_dev_select,
- .check_atapi_dma = pdc_check_atapi_dma,
-
- .qc_prep = pdc_qc_prep,
- .qc_issue = pdc_qc_issue_prot,
+static struct ata_port_operations pdc_pata_ops = {
+ .inherits = &pdc_common_ops,
+ .cable_detect = pdc_pata_cable_detect,
.freeze = pdc_freeze,
.thaw = pdc_thaw,
- .error_handler = pdc_pata_error_handler,
- .post_internal_cmd = pdc_post_internal_cmd,
- .cable_detect = pdc_pata_cable_detect,
- .data_xfer = ata_data_xfer,
- .irq_clear = pdc_irq_clear,
- .irq_on = ata_irq_on,
-
.port_start = pdc_common_port_start,
};
@@ -451,7 +405,7 @@
u8 *cdb = qc->cdb;
struct pdc_port_priv *pp = ap->private_data;
u8 *buf = pp->pkt;
- u32 *buf32 = (u32 *) buf;
+ __le32 *buf32 = (__le32 *) buf;
unsigned int dev_sel, feature;
/* set control bits (byte 0), zero delay seq id (byte 3),
@@ -738,24 +692,12 @@
readl(host_mmio + hotplug_offset); /* flush */
}
-static void pdc_common_error_handler(struct ata_port *ap, ata_reset_fn_t hardreset)
+static void pdc_error_handler(struct ata_port *ap)
{
if (!(ap->pflags & ATA_PFLAG_FROZEN))
pdc_reset_port(ap);
- /* perform recovery */
- ata_do_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
- ata_std_postreset);
-}
-
-static void pdc_pata_error_handler(struct ata_port *ap)
-{
- pdc_common_error_handler(ap, NULL);
-}
-
-static void pdc_sata_error_handler(struct ata_port *ap)
-{
- pdc_common_error_handler(ap, sata_std_hardreset);
+ ata_std_error_handler(ap);
}
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
@@ -952,7 +894,7 @@
readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
}
-static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
case ATAPI_PROT_NODATA:
@@ -972,20 +914,20 @@
break;
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
- ata_tf_load(ap, tf);
+ ata_sff_tf_load(ap, tf);
}
static void pdc_exec_command_mmio(struct ata_port *ap,
const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
- ata_exec_command(ap, tf);
+ ata_sff_exec_command(ap, tf);
}
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 91cc12c..1600107 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -121,50 +121,38 @@
static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
static void qs_bmdma_stop(struct ata_queued_cmd *qc);
static u8 qs_bmdma_status(struct ata_port *ap);
-static void qs_irq_clear(struct ata_port *ap);
static void qs_freeze(struct ata_port *ap);
static void qs_thaw(struct ata_port *ap);
+static int qs_prereset(struct ata_link *link, unsigned long deadline);
static void qs_error_handler(struct ata_port *ap);
static struct scsi_host_template qs_ata_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = QS_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ENABLE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = QS_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations qs_ata_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
+static struct ata_port_operations qs_ata_ops = {
+ .inherits = &ata_sff_port_ops,
+
.check_atapi_dma = qs_check_atapi_dma,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
- .qc_prep = qs_qc_prep,
- .qc_issue = qs_qc_issue,
- .data_xfer = ata_data_xfer,
- .freeze = qs_freeze,
- .thaw = qs_thaw,
- .error_handler = qs_error_handler,
- .irq_clear = qs_irq_clear,
- .irq_on = ata_irq_on,
- .scr_read = qs_scr_read,
- .scr_write = qs_scr_write,
- .port_start = qs_port_start,
- .host_stop = qs_host_stop,
.bmdma_stop = qs_bmdma_stop,
.bmdma_status = qs_bmdma_status,
+ .qc_prep = qs_qc_prep,
+ .qc_issue = qs_qc_issue,
+
+ .freeze = qs_freeze,
+ .thaw = qs_thaw,
+ .prereset = qs_prereset,
+ .softreset = ATA_OP_NULL,
+ .error_handler = qs_error_handler,
+ .post_internal_cmd = ATA_OP_NULL,
+
+ .scr_read = qs_scr_read,
+ .scr_write = qs_scr_write,
+
+ .port_start = qs_port_start,
+ .host_stop = qs_host_stop,
};
static const struct ata_port_info qs_port_info[] = {
@@ -211,11 +199,6 @@
return 0;
}
-static void qs_irq_clear(struct ata_port *ap)
-{
- /* nothing */
-}
-
static inline void qs_enter_reg_mode(struct ata_port *ap)
{
u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
@@ -256,7 +239,7 @@
struct ata_port *ap = link->ap;
qs_reset_channel_logic(ap);
- return ata_std_prereset(link, deadline);
+ return ata_sff_prereset(link, deadline);
}
static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
@@ -270,8 +253,7 @@
static void qs_error_handler(struct ata_port *ap)
{
qs_enter_reg_mode(ap);
- ata_do_eh(ap, qs_prereset, NULL, sata_std_hardreset,
- ata_std_postreset);
+ ata_std_error_handler(ap);
}
static int qs_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
@@ -321,7 +303,7 @@
qs_enter_reg_mode(qc->ap);
if (qc->tf.protocol != ATA_PROT_DMA) {
- ata_qc_prep(qc);
+ ata_sff_qc_prep(qc);
return;
}
@@ -380,7 +362,7 @@
}
pp->state = qs_state_mmio;
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static void qs_do_or_die(struct ata_queued_cmd *qc, u8 status)
@@ -469,7 +451,7 @@
* and pretend we knew it was ours.. (ugh).
* This does not affect packet mode.
*/
- ata_check_status(ap);
+ ata_sff_check_status(ap);
handled = 1;
continue;
}
@@ -477,7 +459,7 @@
if (!pp || pp->state != qs_state_mmio)
continue;
if (!(qc->tf.flags & ATA_TFLAG_POLLING))
- handled |= ata_host_intr(ap, qc);
+ handled |= ata_sff_host_intr(ap, qc);
}
}
return handled;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 0b8191b..88bf421 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -60,7 +60,6 @@
SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO,
- SIL_DFL_LINK_FLAGS = ATA_LFLAG_HRST_TO_RESUME,
/*
* Controller IDs
@@ -168,54 +167,23 @@
};
static struct scsi_host_template sil_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations sil_ops = {
+static struct ata_port_operations sil_ops = {
+ .inherits = &ata_bmdma_port_ops,
.dev_config = sil_dev_config,
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
.set_mode = sil_set_mode,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
.freeze = sil_freeze,
.thaw = sil_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
.scr_read = sil_scr_read,
.scr_write = sil_scr_write,
- .port_start = ata_port_start,
};
static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -225,7 +193,6 @@
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
SIL_FLAG_NO_SATA_IRQ,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -234,7 +201,6 @@
/* sil_3512 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -243,7 +209,6 @@
/* sil_3114 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
- .link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@@ -404,7 +369,7 @@
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
/* this sometimes happens, just clear IRQ */
- ata_chk_status(ap);
+ ap->ops->sff_check_status(ap);
return;
}
@@ -440,15 +405,15 @@
}
/* check main status, clearing INTRQ */
- status = ata_chk_status(ap);
+ status = ap->ops->sff_check_status(ap);
if (unlikely(status & ATA_BUSY))
goto err_hsm;
/* ack bmdma irq events */
- ata_bmdma_irq_clear(ap);
+ ata_sff_irq_clear(ap);
/* kick HSM in the ass */
- ata_hsm_move(ap, qc, status, 0);
+ ata_sff_hsm_move(ap, qc, status, 0);
if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2);
@@ -515,8 +480,8 @@
u32 tmp;
/* clear IRQ */
- ata_chk_status(ap);
- ata_bmdma_irq_clear(ap);
+ ap->ops->sff_check_status(ap);
+ ata_sff_irq_clear(ap);
/* turn on SATA IRQ if supported */
if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
@@ -690,7 +655,7 @@
ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
ioaddr->scr_addr = mmio_base + sil_port[i].scr;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio");
ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf");
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index df7988d..27a1101 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -254,7 +254,6 @@
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
ATA_FLAG_AN | ATA_FLAG_PMP,
- SIL24_COMMON_LFLAGS = ATA_LFLAG_SKIP_D2H_BSY,
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf,
@@ -286,45 +285,45 @@
"device error via D2H FIS" },
[PORT_CERR_SDB] = { AC_ERR_DEV, 0,
"device error via SDB FIS" },
- [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_RESET,
"error in data FIS" },
- [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_RESET,
"failed to transmit command FIS" },
- [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
"protocol mismatch" },
- [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_RESET,
"data directon mismatch" },
- [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_RESET,
"ran out of SGEs while writing" },
- [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_RESET,
"ran out of SGEs while reading" },
- [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_RESET,
"invalid data directon for ATAPI CDB" },
- [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
+ [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
"SGT not on qword boundary" },
- [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI target abort while fetching SGT" },
- [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI master abort while fetching SGT" },
- [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI parity error while fetching SGT" },
- [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
+ [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
"PRB not on qword boundary" },
- [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI target abort while fetching PRB" },
- [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI master abort while fetching PRB" },
- [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI parity error while fetching PRB" },
- [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"undefined error while transferring data" },
- [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI target abort while transferring data" },
- [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI master abort while transferring data" },
- [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI parity error while transferring data" },
- [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_RESET,
"FIS received while sending service FIS" },
};
@@ -337,23 +336,26 @@
struct sil24_port_priv {
union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
dma_addr_t cmd_block_dma; /* DMA base addr for them */
- struct ata_taskfile tf; /* Cached taskfile registers */
int do_port_rst;
};
static void sil24_dev_config(struct ata_device *dev);
-static u8 sil24_check_status(struct ata_port *ap);
static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val);
static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
-static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static int sil24_qc_defer(struct ata_queued_cmd *qc);
static void sil24_qc_prep(struct ata_queued_cmd *qc);
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
-static void sil24_irq_clear(struct ata_port *ap);
+static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
static void sil24_pmp_attach(struct ata_port *ap);
static void sil24_pmp_detach(struct ata_port *ap);
static void sil24_freeze(struct ata_port *ap);
static void sil24_thaw(struct ata_port *ap);
+static int sil24_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int sil24_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static void sil24_error_handler(struct ata_port *ap);
static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
static int sil24_port_start(struct ata_port *ap);
@@ -386,52 +388,36 @@
};
static struct scsi_host_template sil24_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .change_queue_depth = ata_scsi_change_queue_depth,
+ ATA_NCQ_SHT(DRV_NAME),
.can_queue = SIL24_MAX_CMDS,
- .this_id = ATA_SHT_THIS_ID,
.sg_tablesize = SIL24_MAX_SGE,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations sil24_ops = {
- .dev_config = sil24_dev_config,
-
- .check_status = sil24_check_status,
- .check_altstatus = sil24_check_status,
- .dev_select = ata_noop_dev_select,
-
- .tf_read = sil24_tf_read,
+static struct ata_port_operations sil24_ops = {
+ .inherits = &sata_pmp_port_ops,
.qc_defer = sil24_qc_defer,
.qc_prep = sil24_qc_prep,
.qc_issue = sil24_qc_issue,
-
- .irq_clear = sil24_irq_clear,
-
- .scr_read = sil24_scr_read,
- .scr_write = sil24_scr_write,
-
- .pmp_attach = sil24_pmp_attach,
- .pmp_detach = sil24_pmp_detach,
+ .qc_fill_rtf = sil24_qc_fill_rtf,
.freeze = sil24_freeze,
.thaw = sil24_thaw,
+ .softreset = sil24_softreset,
+ .hardreset = sil24_hardreset,
+ .pmp_softreset = sil24_softreset,
+ .pmp_hardreset = sil24_pmp_hardreset,
.error_handler = sil24_error_handler,
.post_internal_cmd = sil24_post_internal_cmd,
+ .dev_config = sil24_dev_config,
+
+ .scr_read = sil24_scr_read,
+ .scr_write = sil24_scr_write,
+ .pmp_attach = sil24_pmp_attach,
+ .pmp_detach = sil24_pmp_detach,
.port_start = sil24_port_start,
-
#ifdef CONFIG_PM
.port_resume = sil24_port_resume,
#endif
@@ -449,7 +435,6 @@
{
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
SIL24_FLAG_PCIX_IRQ_WOC,
- .link_flags = SIL24_COMMON_LFLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
@@ -458,7 +443,6 @@
/* sil_3132 */
{
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
- .link_flags = SIL24_COMMON_LFLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
@@ -467,7 +451,6 @@
/* sil_3131/sil_3531 */
{
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
- .link_flags = SIL24_COMMON_LFLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
@@ -482,9 +465,19 @@
return tag;
}
+static unsigned long sil24_port_offset(struct ata_port *ap)
+{
+ return ap->port_no * PORT_REGS_SIZE;
+}
+
+static void __iomem *sil24_port_base(struct ata_port *ap)
+{
+ return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap);
+}
+
static void sil24_dev_config(struct ata_device *dev)
{
- void __iomem *port = dev->link->ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(dev->link->ap);
if (dev->cdb_len == 16)
writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
@@ -494,7 +487,7 @@
static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
{
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
struct sil24_prb __iomem *prb;
u8 fis[6 * 4];
@@ -503,12 +496,6 @@
ata_tf_from_fis(fis, tf);
}
-static u8 sil24_check_status(struct ata_port *ap)
-{
- struct sil24_port_priv *pp = ap->private_data;
- return pp->tf.command;
-}
-
static int sil24_scr_map[] = {
[SCR_CONTROL] = 0,
[SCR_STATUS] = 1,
@@ -518,7 +505,7 @@
static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
{
- void __iomem *scr_addr = ap->ioaddr.scr_addr;
+ void __iomem *scr_addr = sil24_port_base(ap) + PORT_SCONTROL;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
void __iomem *addr;
@@ -531,7 +518,7 @@
static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
{
- void __iomem *scr_addr = ap->ioaddr.scr_addr;
+ void __iomem *scr_addr = sil24_port_base(ap) + PORT_SCONTROL;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
void __iomem *addr;
@@ -542,15 +529,9 @@
return -EINVAL;
}
-static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct sil24_port_priv *pp = ap->private_data;
- *tf = pp->tf;
-}
-
static void sil24_config_port(struct ata_port *ap)
{
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
/* configure IRQ WoC */
if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
@@ -575,7 +556,7 @@
static void sil24_config_pmp(struct ata_port *ap, int attached)
{
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
if (attached)
writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
@@ -585,7 +566,7 @@
static void sil24_clear_pmp(struct ata_port *ap)
{
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
int i;
writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
@@ -600,12 +581,12 @@
static int sil24_init_port(struct ata_port *ap)
{
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
struct sil24_port_priv *pp = ap->private_data;
u32 tmp;
/* clear PMP error status */
- if (ap->nr_pmp_links)
+ if (sata_pmp_attached(ap))
sil24_clear_pmp(ap);
writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
@@ -616,7 +597,7 @@
if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
pp->do_port_rst = 1;
- ap->link.eh_context.i.action |= ATA_EH_HARDRESET;
+ ap->link.eh_context.i.action |= ATA_EH_RESET;
return -EIO;
}
@@ -628,7 +609,7 @@
int is_cmd, u32 ctrl,
unsigned long timeout_msec)
{
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
struct sil24_port_priv *pp = ap->private_data;
struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
dma_addr_t paddr = pp->cmd_block_dma;
@@ -670,10 +651,11 @@
return rc;
}
-static int sil24_do_softreset(struct ata_link *link, unsigned int *class,
- int pmp, unsigned long deadline)
+static int sil24_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
+ int pmp = sata_srst_pmp(link);
unsigned long timeout_msec = 0;
struct ata_taskfile tf;
const char *reason;
@@ -681,12 +663,6 @@
DPRINTK("ENTER\n");
- if (ata_link_offline(link)) {
- DPRINTK("PHY reports no device\n");
- *class = ATA_DEV_NONE;
- goto out;
- }
-
/* put the port into known state */
if (sil24_init_port(ap)) {
reason = "port not ready";
@@ -711,10 +687,6 @@
sil24_read_tf(ap, 0, &tf);
*class = ata_dev_classify(&tf);
- if (*class == ATA_DEV_UNKNOWN)
- *class = ATA_DEV_NONE;
-
- out:
DPRINTK("EXIT, class=%u\n", *class);
return 0;
@@ -723,17 +695,11 @@
return -EIO;
}
-static int sil24_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- return sil24_do_softreset(link, class, SATA_PMP_CTRL_PORT, deadline);
-}
-
static int sil24_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
struct sil24_port_priv *pp = ap->private_data;
int did_port_rst = 0;
const char *reason;
@@ -911,7 +877,7 @@
{
struct ata_port *ap = qc->ap;
struct sil24_port_priv *pp = ap->private_data;
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
unsigned int tag = sil24_tag(qc->tag);
dma_addr_t paddr;
void __iomem *activate;
@@ -925,9 +891,10 @@
return 0;
}
-static void sil24_irq_clear(struct ata_port *ap)
+static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
{
- /* unused */
+ sil24_read_tf(qc->ap, qc->tag, &qc->result_tf);
+ return true;
}
static void sil24_pmp_attach(struct ata_port *ap)
@@ -942,12 +909,6 @@
sil24_config_pmp(ap, 0);
}
-static int sil24_pmp_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
-{
- return sil24_do_softreset(link, class, link->pmp, deadline);
-}
-
static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
@@ -960,12 +921,12 @@
return rc;
}
- return sata_pmp_std_hardreset(link, class, deadline);
+ return sata_std_hardreset(link, class, deadline);
}
static void sil24_freeze(struct ata_port *ap)
{
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
/* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
* PORT_IRQ_ENABLE instead.
@@ -975,7 +936,7 @@
static void sil24_thaw(struct ata_port *ap)
{
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
u32 tmp;
/* clear IRQ */
@@ -988,7 +949,7 @@
static void sil24_error_intr(struct ata_port *ap)
{
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
struct sil24_port_priv *pp = ap->private_data;
struct ata_queued_cmd *qc = NULL;
struct ata_link *link;
@@ -1022,7 +983,7 @@
if (irq_stat & PORT_IRQ_UNK_FIS) {
ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(ehi, "unknown FIS");
freeze = 1;
}
@@ -1043,14 +1004,14 @@
*/
if (ap->nr_active_links >= 3) {
ehi->err_mask |= AC_ERR_OTHER;
- ehi->action |= ATA_EH_HARDRESET;
+ ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(ehi, "PMP DMA CS errata");
pp->do_port_rst = 1;
freeze = 1;
}
/* find out the offending link and qc */
- if (ap->nr_pmp_links) {
+ if (sata_pmp_attached(ap)) {
context = readl(port + PORT_CONTEXT);
pmp = (context >> 5) & 0xf;
@@ -1064,7 +1025,7 @@
irq_stat);
} else {
err_mask |= AC_ERR_HSM;
- action |= ATA_EH_HARDRESET;
+ action |= ATA_EH_RESET;
freeze = 1;
}
} else
@@ -1078,28 +1039,27 @@
if (ci && ci->desc) {
err_mask |= ci->err_mask;
action |= ci->action;
- if (action & ATA_EH_RESET_MASK)
+ if (action & ATA_EH_RESET)
freeze = 1;
ata_ehi_push_desc(ehi, "%s", ci->desc);
} else {
err_mask |= AC_ERR_OTHER;
- action |= ATA_EH_SOFTRESET;
+ action |= ATA_EH_RESET;
freeze = 1;
ata_ehi_push_desc(ehi, "unknown command error %d",
cerr);
}
/* record error info */
- if (qc) {
- sil24_read_tf(ap, qc->tag, &pp->tf);
+ if (qc)
qc->err_mask |= err_mask;
- } else
+ else
ehi->err_mask |= err_mask;
ehi->action |= action;
/* if PMP, resume */
- if (ap->nr_pmp_links)
+ if (sata_pmp_attached(ap))
writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
}
@@ -1114,18 +1074,9 @@
}
}
-static void sil24_finish_qc(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct sil24_port_priv *pp = ap->private_data;
-
- if (qc->flags & ATA_QCFLAG_RESULT_TF)
- sil24_read_tf(ap, qc->tag, &pp->tf);
-}
-
static inline void sil24_host_intr(struct ata_port *ap)
{
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
u32 slot_stat, qc_active;
int rc;
@@ -1147,13 +1098,13 @@
}
qc_active = slot_stat & ~HOST_SSTAT_ATTN;
- rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
+ rc = ata_qc_complete_multiple(ap, qc_active);
if (rc > 0)
return;
if (rc < 0) {
struct ata_eh_info *ehi = &ap->link.eh_info;
ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_SOFTRESET;
+ ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
return;
}
@@ -1209,11 +1160,7 @@
if (sil24_init_port(ap))
ata_eh_freeze_port(ap);
- /* perform recovery */
- sata_pmp_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset,
- ata_std_postreset, sata_pmp_std_prereset,
- sil24_pmp_softreset, sil24_pmp_hardreset,
- sata_pmp_std_postreset);
+ sata_pmp_error_handler(ap);
pp->do_port_rst = 0;
}
@@ -1239,8 +1186,6 @@
if (!pp)
return -ENOMEM;
- pp->tf.command = ATA_DRDY;
-
cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
if (!cb)
return -ENOMEM;
@@ -1251,6 +1196,9 @@
ap->private_data = pp;
+ ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
+ ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port");
+
return 0;
}
@@ -1269,7 +1217,8 @@
/* init ports */
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- void __iomem *port = ap->ioaddr.cmd_addr;
+ void __iomem *port = sil24_port_base(ap);
+
/* Initial PHY setting */
writel(0x20c, port + PORT_PHY_CFG);
@@ -1302,7 +1251,7 @@
const struct ata_port_info *ppi[] = { &pi, NULL };
void __iomem * const *iomap;
struct ata_host *host;
- int i, rc;
+ int rc;
u32 tmp;
/* cause link error if sil24_cmd_block is sized wrongly */
@@ -1342,18 +1291,6 @@
return -ENOMEM;
host->iomap = iomap;
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap = host->ports[i];
- size_t offset = ap->port_no * PORT_REGS_SIZE;
- void __iomem *port = iomap[SIL24_PORT_BAR] + offset;
-
- host->ports[i]->ioaddr.cmd_addr = port;
- host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL;
-
- ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
- ata_port_pbar_desc(ap, SIL24_PORT_BAR, offset, "port");
- }
-
/* configure and activate the device */
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index a01260a..6b8e45b 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -86,45 +86,13 @@
};
static struct scsi_host_template sis_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations sis_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
+static struct ata_port_operations sis_ops = {
+ .inherits = &ata_bmdma_port_ops,
.scr_read = sis_scr_read,
.scr_write = sis_scr_write,
- .port_start = ata_port_start,
};
static const struct ata_port_info sis_port_info = {
@@ -341,7 +309,7 @@
break;
}
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
@@ -359,8 +327,8 @@
pci_set_master(pdev);
pci_intx(pdev, 1);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &sis_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &sis_sht);
}
static int __init sis_init(void)
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 840d1c4..16aa683 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -233,7 +233,7 @@
/* issue r/w command if this is not a ATA DMA command*/
if (qc->tf.protocol != ATA_PROT_DMA)
- ap->ops->exec_command(ap, &qc->tf);
+ ap->ops->sff_exec_command(ap, &qc->tf);
}
/**
@@ -269,7 +269,7 @@
and the start command. */
/* issue r/w command if the access is to ATA*/
if (qc->tf.protocol == ATA_PROT_DMA)
- ap->ops->exec_command(ap, &qc->tf);
+ ap->ops->sff_exec_command(ap, &qc->tf);
}
@@ -327,50 +327,23 @@
static struct scsi_host_template k2_sata_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
+ ATA_BMDMA_SHT(DRV_NAME),
#ifdef CONFIG_PPC_OF
.proc_info = k2_sata_proc_info,
#endif
- .bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations k2_sata_ops = {
- .tf_load = k2_sata_tf_load,
- .tf_read = k2_sata_tf_read,
- .check_status = k2_stat_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
+static struct ata_port_operations k2_sata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .sff_tf_load = k2_sata_tf_load,
+ .sff_tf_read = k2_sata_tf_read,
+ .sff_check_status = k2_stat_check_status,
.check_atapi_dma = k2_sata_check_atapi_dma,
.bmdma_setup = k2_bmdma_setup_mmio,
.bmdma_start = k2_bmdma_start_mmio,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
.scr_read = k2_sata_scr_read,
.scr_write = k2_sata_scr_write,
- .port_start = ata_port_start,
};
static const struct ata_port_info k2_port_info[] = {
@@ -519,8 +492,8 @@
writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &k2_sata_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &k2_sata_sht);
}
/* 0x240 is device ID for Apple K2 device
@@ -531,8 +504,8 @@
* */
static const struct pci_device_id k2_sata_pci_tbl[] = {
{ PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 },
- { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw4 },
- { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw8 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw8 },
+ { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw4 },
{ PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 },
{ PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 },
{ PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 },
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index e3d56bc..ec04b8d 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -232,40 +232,30 @@
static void pdc20621_put_to_dimm(struct ata_host *host,
void *psource, u32 offset, u32 size);
static void pdc20621_irq_clear(struct ata_port *ap);
-static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
+static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
static struct scsi_host_template pdc_sata_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
+ ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
};
-static const struct ata_port_operations pdc_20621_ops = {
- .tf_load = pdc_tf_load_mmio,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = pdc_exec_command_mmio,
- .dev_select = ata_std_dev_select,
+/* TODO: inherit from base port_ops after converting to new EH */
+static struct ata_port_operations pdc_20621_ops = {
+ .sff_tf_load = pdc_tf_load_mmio,
+ .sff_tf_read = ata_sff_tf_read,
+ .sff_check_status = ata_sff_check_status,
+ .sff_exec_command = pdc_exec_command_mmio,
+ .sff_dev_select = ata_sff_dev_select,
.phy_reset = pdc_20621_phy_reset,
.qc_prep = pdc20621_qc_prep,
- .qc_issue = pdc20621_qc_issue_prot,
- .data_xfer = ata_data_xfer,
+ .qc_issue = pdc20621_qc_issue,
+ .qc_fill_rtf = ata_sff_qc_fill_rtf,
+ .sff_data_xfer = ata_sff_data_xfer,
.eng_timeout = pdc_eng_timeout,
- .irq_clear = pdc20621_irq_clear,
- .irq_on = ata_irq_on,
+ .sff_irq_clear = pdc20621_irq_clear,
+ .sff_irq_on = ata_sff_irq_on,
.port_start = pdc_port_start,
};
@@ -475,7 +465,7 @@
void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR];
unsigned int portno = ap->port_no;
unsigned int i, si, idx, total_len = 0, sgt_len;
- u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
+ __le32 *buf = (__le32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
@@ -693,7 +683,7 @@
}
}
-static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
@@ -709,7 +699,7 @@
break;
}
- return ata_qc_issue_prot(qc);
+ return ata_sff_qc_issue(qc);
}
static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
@@ -781,7 +771,7 @@
/* command completion, but no data xfer */
} else if (qc->tf.protocol == ATA_PROT_NODATA) {
- status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+ status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status);
qc->err_mask |= ac_err_mask(status);
ata_qc_complete(qc);
@@ -890,7 +880,7 @@
break;
default:
- drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+ drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
ata_port_printk(ap, KERN_ERR,
"unknown timeout, cmd 0x%x stat 0x%x\n",
@@ -909,7 +899,7 @@
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
- ata_tf_load(ap, tf);
+ ata_sff_tf_load(ap, tf);
}
@@ -917,7 +907,7 @@
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
- ata_exec_command(ap, tf);
+ ata_sff_exec_command(ap, tf);
}
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index e710e71..f277cea 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -76,50 +76,13 @@
};
static struct scsi_host_template uli_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations uli_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
+static struct ata_port_operations uli_ops = {
+ .inherits = &ata_bmdma_port_ops,
.scr_read = uli_scr_read,
.scr_write = uli_scr_write,
-
- .port_start = ata_port_start,
};
static const struct ata_port_info uli_port_info = {
@@ -212,11 +175,11 @@
host->private_data = hpriv;
/* the first two ports are standard SFF */
- rc = ata_pci_init_sff_host(host);
+ rc = ata_pci_sff_init_host(host);
if (rc)
return rc;
- rc = ata_pci_init_bmdma(host);
+ rc = ata_pci_bmdma_init(host);
if (rc)
return rc;
@@ -237,7 +200,7 @@
((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
ioaddr->bmdma_addr = iomap[4] + 16;
hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[2],
"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
@@ -252,7 +215,7 @@
((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
ioaddr->bmdma_addr = iomap[4] + 24;
hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[2],
"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
@@ -279,8 +242,8 @@
pci_set_master(pdev);
pci_intx(pdev, 1);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &uli_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &uli_sht);
}
static int __init uli_init(void)
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 0d03f44..96deeb3 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -71,7 +71,7 @@
static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static void svia_noop_freeze(struct ata_port *ap);
-static void vt6420_error_handler(struct ata_port *ap);
+static int vt6420_prereset(struct ata_link *link, unsigned long deadline);
static int vt6421_pata_cable_detect(struct ata_port *ap);
static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev);
static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
@@ -100,110 +100,26 @@
};
static struct scsi_host_template svia_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations vt6420_sata_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
+static struct ata_port_operations vt6420_sata_ops = {
+ .inherits = &ata_bmdma_port_ops,
.freeze = svia_noop_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = vt6420_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
+ .prereset = vt6420_prereset,
};
-static const struct ata_port_operations vt6421_pata_ops = {
+static struct ata_port_operations vt6421_pata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .cable_detect = vt6421_pata_cable_detect,
.set_piomode = vt6421_set_pio_mode,
.set_dmamode = vt6421_set_dma_mode,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = vt6421_pata_cable_detect,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
- .port_start = ata_port_start,
};
-static const struct ata_port_operations vt6421_sata_ops = {
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
-
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = ata_cable_sata,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
-
+static struct ata_port_operations vt6421_sata_ops = {
+ .inherits = &ata_bmdma_port_ops,
.scr_read = svia_scr_read,
.scr_write = svia_scr_write,
-
- .port_start = ata_port_start,
};
static const struct ata_port_info vt6420_port_info = {
@@ -257,8 +173,8 @@
/* Some VIA controllers choke if ATA_NIEN is manipulated in
* certain way. Leave it alone and just clear pending IRQ.
*/
- ata_chk_status(ap);
- ata_bmdma_irq_clear(ap);
+ ap->ops->sff_check_status(ap);
+ ata_sff_irq_clear(ap);
}
/**
@@ -320,23 +236,17 @@
if (!online) {
/* tell EH to bail */
- ehc->i.action &= ~ATA_EH_RESET_MASK;
+ ehc->i.action &= ~ATA_EH_RESET;
return 0;
}
skip_scr:
/* wait for !BSY */
- ata_wait_ready(ap, deadline);
+ ata_sff_wait_ready(link, deadline);
return 0;
}
-static void vt6420_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, vt6420_prereset, ata_std_softreset, NULL,
- ata_std_postreset);
-}
-
static int vt6421_pata_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -394,7 +304,7 @@
ioaddr->bmdma_addr = bmdma_addr;
ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no);
- ata_std_ports(ioaddr);
+ ata_sff_std_ports(ioaddr);
ata_port_pbar_desc(ap, ap->port_no, -1, "port");
ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma");
@@ -406,7 +316,7 @@
struct ata_host *host;
int rc;
- rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
*r_host = host;
@@ -538,8 +448,8 @@
svia_configure(pdev);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &svia_sht);
+ return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+ IRQF_SHARED, &svia_sht);
}
static int __init svia_init(void)
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 95ae3ed..f3d635c 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -200,7 +200,7 @@
struct ata_ioports *ioaddr = &ap->ioaddr;
u16 nsect, lbal, lbam, lbah, feature;
- tf->command = ata_check_status(ap);
+ tf->command = ata_sff_check_status(ap);
tf->device = readw(ioaddr->device_addr);
feature = readw(ioaddr->error_addr);
nsect = readw(ioaddr->nsect_addr);
@@ -243,7 +243,7 @@
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
- handled = ata_host_intr(ap, qc);
+ handled = ata_sff_host_intr(ap, qc);
/* We received an interrupt during a polled command,
* or some other spurious condition. Interrupt reporting
@@ -251,7 +251,7 @@
* simply clear the interrupt
*/
if (unlikely(!handled))
- ata_chk_status(ap);
+ ap->ops->sff_check_status(ap);
}
/*
@@ -300,46 +300,18 @@
static struct scsi_host_template vsc_sata_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
-static const struct ata_port_operations vsc_sata_ops = {
- .tf_load = vsc_sata_tf_load,
- .tf_read = vsc_sata_tf_read,
- .exec_command = ata_exec_command,
- .check_status = ata_check_status,
- .dev_select = ata_std_dev_select,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
+static struct ata_port_operations vsc_sata_ops = {
+ .inherits = &ata_bmdma_port_ops,
+ .sff_tf_load = vsc_sata_tf_load,
+ .sff_tf_read = vsc_sata_tf_read,
.freeze = vsc_freeze,
.thaw = vsc_thaw,
- .error_handler = ata_bmdma_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
.scr_read = vsc_sata_scr_read,
.scr_write = vsc_sata_scr_write,
- .port_start = ata_port_start,
};
static void __devinit vsc_sata_setup_port(struct ata_ioports *port,
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 47c57a4..98099f5 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -978,6 +978,7 @@
/* Docs are vague about this atm_hdr field. By the way, the FS
* chip makes odd errors if lower bits are set.... -- REW */
tc->atm_hdr = (vpi << 20) | (vci << 4);
+ tmc0 = 0;
{
int pcr = atm_pcr_goal (txtp);
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 2e3395b..ffc4a5a 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -3000,8 +3000,7 @@
/* eeprom routines -- see 4.7 */
-u8
-read_prom_byte(struct he_dev *he_dev, int addr)
+static u8 read_prom_byte(struct he_dev *he_dev, int addr)
{
u32 val = 0, tmp_read = 0;
int i, j = 0;
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index b967919..28d77b5 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -2016,8 +2016,7 @@
return 0;
}
-int
-idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
+static int idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
{
return idt77252_send_skb(vcc, skb, 0);
}
@@ -3072,8 +3071,7 @@
return 0;
}
-void
-idt77252_dev_close(struct atm_dev *dev)
+static void idt77252_dev_close(struct atm_dev *dev)
{
struct idt77252_dev *card = dev->dev_data;
u32 conf;
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index ef52452..670c093 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -958,6 +958,7 @@
/***************************** IA_LIB END *****************************/
+#ifdef CONFIG_ATM_IA_DEBUG
static int tcnter = 0;
static void xdump( u_char* cp, int length, char* prefix )
{
@@ -992,6 +993,7 @@
}
} /* close xdump(... */
+#endif /* CONFIG_ATM_IA_DEBUG */
static struct atm_dev *ia_boards = NULL;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 55bd35c..9c9627e 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -50,6 +50,7 @@
#include <scsi/sg.h>
#include <scsi/scsi_ioctl.h>
#include <linux/cdrom.h>
+#include <linux/scatterlist.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
#define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index b53fdb0..60cc543 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -153,6 +153,12 @@
struct kvec iov;
sigset_t blocked, oldset;
+ if (unlikely(!sock)) {
+ printk(KERN_ERR "%s: Attempted %s on closed socket in sock_xmit\n",
+ lo->disk->disk_name, (send ? "send" : "recv"));
+ return -EINVAL;
+ }
+
/* Allow interception of SIGKILL only
* Don't allow other signals to interrupt the transmission */
siginitsetinv(&blocked, sigmask(SIGKILL));
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index c452e2d..27bfe72 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -8,6 +8,7 @@
* and is not licensed separately. See file COPYING for details.
*
* TODO (sorted by decreasing priority)
+ * -- Return sense now that rq allows it (we always auto-sense anyway).
* -- set readonly flag for CDs, set removable flag for CF readers
* -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
* -- verify the 13 conditions and do bulk resets
@@ -359,7 +360,8 @@
static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
struct ub_scsi_cmd *cmd, struct ub_request *urq);
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_end_rq(struct request *rq, unsigned int status);
+static void ub_end_rq(struct request *rq, unsigned int status,
+ unsigned int cmd_len);
static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
struct ub_request *urq, struct ub_scsi_cmd *cmd);
static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -642,13 +644,13 @@
if (atomic_read(&sc->poison)) {
blkdev_dequeue_request(rq);
- ub_end_rq(rq, DID_NO_CONNECT << 16);
+ ub_end_rq(rq, DID_NO_CONNECT << 16, blk_rq_bytes(rq));
return 0;
}
if (lun->changed && !blk_pc_request(rq)) {
blkdev_dequeue_request(rq);
- ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
+ ub_end_rq(rq, SAM_STAT_CHECK_CONDITION, blk_rq_bytes(rq));
return 0;
}
@@ -701,7 +703,7 @@
drop:
ub_put_cmd(lun, cmd);
- ub_end_rq(rq, DID_ERROR << 16);
+ ub_end_rq(rq, DID_ERROR << 16, blk_rq_bytes(rq));
return 0;
}
@@ -770,6 +772,7 @@
struct ub_request *urq = cmd->back;
struct request *rq;
unsigned int scsi_status;
+ unsigned int cmd_len;
rq = urq->rq;
@@ -779,8 +782,18 @@
rq->data_len = 0;
else
rq->data_len -= cmd->act_len;
+ scsi_status = 0;
+ } else {
+ if (cmd->act_len != cmd->len) {
+ if ((cmd->key == MEDIUM_ERROR ||
+ cmd->key == UNIT_ATTENTION) &&
+ ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
+ return;
+ scsi_status = SAM_STAT_CHECK_CONDITION;
+ } else {
+ scsi_status = 0;
+ }
}
- scsi_status = 0;
} else {
if (blk_pc_request(rq)) {
/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
@@ -801,14 +814,17 @@
urq->rq = NULL;
+ cmd_len = cmd->len;
ub_put_cmd(lun, cmd);
- ub_end_rq(rq, scsi_status);
+ ub_end_rq(rq, scsi_status, cmd_len);
blk_start_queue(lun->disk->queue);
}
-static void ub_end_rq(struct request *rq, unsigned int scsi_status)
+static void ub_end_rq(struct request *rq, unsigned int scsi_status,
+ unsigned int cmd_len)
{
int error;
+ long rqlen;
if (scsi_status == 0) {
error = 0;
@@ -816,8 +832,12 @@
error = -EIO;
rq->errors = scsi_status;
}
- if (__blk_end_request(rq, error, blk_rq_bytes(rq)))
- BUG();
+ rqlen = blk_rq_bytes(rq); /* Oddly enough, this is the residue. */
+ if (__blk_end_request(rq, error, cmd_len)) {
+ printk(KERN_WARNING DRV_NAME
+ ": __blk_end_request blew, %s-cmd total %u rqlen %ld\n",
+ blk_pc_request(rq)? "pc": "fs", cmd_len, rqlen);
+ }
}
static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h
index c10d128..675d88b 100644
--- a/drivers/char/drm/i915_drv.h
+++ b/drivers/char/drm/i915_drv.h
@@ -1092,8 +1092,8 @@
#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a)
#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
-#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2)
-
+#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\
+ (dev)->pci_device == 0x27AE)
#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
(dev)->pci_device == 0x2982 || \
(dev)->pci_device == 0x2992 || \
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 465ad35..1399971 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -731,14 +731,14 @@
int hpet_alloc(struct hpet_data *hdp)
{
- u64 cap, mcfg, hpet_config;
+ u64 cap, mcfg;
struct hpet_dev *devp;
- u32 i, ntimer, irq;
+ u32 i, ntimer;
struct hpets *hpetp;
size_t siz;
struct hpet __iomem *hpet;
static struct hpets *last = NULL;
- unsigned long period, irq_bitmap;
+ unsigned long period;
unsigned long long temp;
/*
@@ -765,48 +765,12 @@
hpetp->hp_hpet_phys = hdp->hd_phys_address;
hpetp->hp_ntimer = hdp->hd_nirqs;
+
+ for (i = 0; i < hdp->hd_nirqs; i++)
+ hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i];
+
hpet = hpetp->hp_hpet;
- /* Assign IRQs statically for legacy devices */
- hpetp->hp_dev[0].hd_hdwirq = hdp->hd_irq[0];
- hpetp->hp_dev[1].hd_hdwirq = hdp->hd_irq[1];
-
- /* Assign IRQs dynamically for the others */
- for (i = 2, devp = &hpetp->hp_dev[2]; i < hdp->hd_nirqs; i++, devp++) {
- struct hpet_timer __iomem *timer;
-
- timer = &hpet->hpet_timers[devp - hpetp->hp_dev];
-
- /* Check if there's already an IRQ assigned to the timer */
- if (hdp->hd_irq[i]) {
- hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i];
- continue;
- }
-
- hpet_config = readq(&timer->hpet_config);
- irq_bitmap = (hpet_config & Tn_INT_ROUTE_CAP_MASK)
- >> Tn_INT_ROUTE_CAP_SHIFT;
- if (!irq_bitmap)
- irq = 0; /* No valid IRQ Assignable */
- else {
- irq = find_first_bit(&irq_bitmap, 32);
- do {
- hpet_config |= irq << Tn_INT_ROUTE_CNF_SHIFT;
- writeq(hpet_config, &timer->hpet_config);
-
- /*
- * Verify whether we have written a valid
- * IRQ number by reading it back again
- */
- hpet_config = readq(&timer->hpet_config);
- if (irq == (hpet_config & Tn_INT_ROUTE_CNF_MASK)
- >> Tn_INT_ROUTE_CNF_SHIFT)
- break; /* Success */
- } while ((irq = (find_next_bit(&irq_bitmap, 32, irq))));
- }
- hpetp->hp_dev[i].hd_hdwirq = irq;
- }
-
cap = readq(&hpet->hpet_cap);
ntimer = ((cap & HPET_NUM_TIM_CAP_MASK) >> HPET_NUM_TIM_CAP_SHIFT) + 1;
@@ -836,8 +800,7 @@
hpetp->hp_which, hdp->hd_phys_address,
hpetp->hp_ntimer > 1 ? "s" : "");
for (i = 0; i < hpetp->hp_ntimer; i++)
- printk("%s %d", i > 0 ? "," : "",
- hpetp->hp_dev[i].hd_hdwirq);
+ printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
printk("\n");
printk(KERN_INFO "hpet%u: %u %d-bit timers, %Lu Hz\n",
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index 84cdf90..349b6ed 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -116,6 +116,10 @@
err = -EAGAIN;
if (!bytes_read && (filp->f_flags & O_NONBLOCK))
goto out;
+ if (bytes_read < 0) {
+ err = bytes_read;
+ goto out;
+ }
err = -EFAULT;
while (bytes_read && size) {
diff --git a/drivers/char/ip2/i2lib.c b/drivers/char/ip2/i2lib.c
index d6567b3..9c25320 100644
--- a/drivers/char/ip2/i2lib.c
+++ b/drivers/char/ip2/i2lib.c
@@ -644,12 +644,12 @@
// Normal Expected path - We still hold LOCK
break; /* from for()- Enough room: goto proceed */
}
- }
+ ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
+ WRITE_UNLOCK_IRQRESTORE(lock_var_p, flags);
+ } else
+ ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
- ip2trace (CHANN, ITRC_QUEUE, 3, 1, totalsize );
-
- // Prepare to wait for buffers to empty
- WRITE_UNLOCK_IRQRESTORE(lock_var_p,flags);
+ /* Prepare to wait for buffers to empty */
serviceOutgoingFifo(pB); // Dump what we got
if (timeout == 0) {
@@ -1830,6 +1830,8 @@
default: // Neither packet? should be impossible
ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1,
PTYPE_OF(pB->i2eLeadoffWord) );
+ WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,
+ bflags);
break;
} // End of switch on type of packets
diff --git a/drivers/char/rio/riotable.c b/drivers/char/rio/riotable.c
index 991119c..9b52892 100644
--- a/drivers/char/rio/riotable.c
+++ b/drivers/char/rio/riotable.c
@@ -425,8 +425,10 @@
MapP = &p->RIOConnectTable[Next++];
MapP->HostUniqueNum = HostP->UniqueNum;
- if ((HostP->Flags & RUN_STATE) != RC_RUNNING)
+ if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
+ rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
continue;
+ }
MapP->RtaUniqueNum = 0;
MapP->ID = 0;
MapP->Flags = SLOT_IN_USE;
diff --git a/drivers/char/rio/riotty.c b/drivers/char/rio/riotty.c
index a4f0b1e..cfa5436 100644
--- a/drivers/char/rio/riotty.c
+++ b/drivers/char/rio/riotty.c
@@ -319,6 +319,7 @@
PortP->State |= RIO_WOPEN;
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
/*
** ACTION: verify that this is a good thing
** to do here. -- ???
@@ -334,6 +335,7 @@
func_exit();
return -EINTR;
}
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
}
PortP->State &= ~RIO_WOPEN;
}
@@ -493,6 +495,7 @@
if (RIOShortCommand(p, PortP, CLOSE, 1, 0) == RIO_FAIL) {
RIOPreemptiveCmd(p, PortP, FCLOSE);
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
goto close_end;
}
@@ -508,6 +511,7 @@
if (p->RIOHalted) {
RIOClearUp(PortP);
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
goto close_end;
}
if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 613ec81..4d3c701 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1155,6 +1155,48 @@
return NULL;
}
+#ifdef CONFIG_CONSOLE_POLL
+
+/**
+ * tty_find_polling_driver - find device of a polled tty
+ * @name: name string to match
+ * @line: pointer to resulting tty line nr
+ *
+ * This routine returns a tty driver structure, given a name
+ * and the condition that the tty driver is capable of polled
+ * operation.
+ */
+struct tty_driver *tty_find_polling_driver(char *name, int *line)
+{
+ struct tty_driver *p, *res = NULL;
+ int tty_line = 0;
+ char *str;
+
+ mutex_lock(&tty_mutex);
+ /* Search through the tty devices to look for a match */
+ list_for_each_entry(p, &tty_drivers, tty_drivers) {
+ str = name + strlen(p->name);
+ tty_line = simple_strtoul(str, &str, 10);
+ if (*str == ',')
+ str++;
+ if (*str == '\0')
+ str = 0;
+
+ if (tty_line >= 0 && tty_line <= p->num && p->poll_init &&
+ !p->poll_init(p, tty_line, str)) {
+
+ res = p;
+ *line = tty_line;
+ break;
+ }
+ }
+ mutex_unlock(&tty_mutex);
+
+ return res;
+}
+EXPORT_SYMBOL_GPL(tty_find_polling_driver);
+#endif
+
/**
* tty_check_change - check for POSIX terminal changes
* @tty: tty to check
@@ -3850,6 +3892,11 @@
driver->write_proc = op->write_proc;
driver->tiocmget = op->tiocmget;
driver->tiocmset = op->tiocmset;
+#ifdef CONFIG_CONSOLE_POLL
+ driver->poll_init = op->poll_init;
+ driver->poll_get_char = op->poll_get_char;
+ driver->poll_put_char = op->poll_put_char;
+#endif
}
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 6b658d8..6d2f0c8 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -64,6 +64,7 @@
tristate "Support for PCI-attached cryptographic adapters"
depends on S390
select ZCRYPT_MONOLITHIC if ZCRYPT="y"
+ select HW_RANDOM
help
Select this option if you want to use a PCI-attached cryptographic
adapter like:
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 27340a7..6239c3d 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -46,14 +46,6 @@
MPC8560/40, MPC8555, MPC8548 and MPC8641 processors.
The MPC8349, MPC8360 is also supported.
-config FSL_DMA_SELFTEST
- bool "Enable the self test for each DMA channel"
- depends on FSL_DMA
- default y
- ---help---
- Enable the self test for each DMA channel. A self test will be
- performed after the channel probed to ensure the DMA works well.
-
config DMA_ENGINE
bool
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 8db0e7f..d6dc70f 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -362,7 +362,6 @@
BUG_ON(!device->device_alloc_chan_resources);
BUG_ON(!device->device_free_chan_resources);
- BUG_ON(!device->device_dependency_added);
BUG_ON(!device->device_is_tx_complete);
BUG_ON(!device->device_issue_pending);
BUG_ON(!device->dev);
@@ -479,7 +478,8 @@
dma_src = dma_map_single(dev->dev, src, len, DMA_TO_DEVICE);
dma_dest = dma_map_single(dev->dev, dest, len, DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, 0);
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
+ DMA_CTRL_ACK);
if (!tx) {
dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
@@ -487,7 +487,6 @@
return -ENOMEM;
}
- tx->ack = 1;
tx->callback = NULL;
cookie = tx->tx_submit(tx);
@@ -525,7 +524,8 @@
dma_src = dma_map_single(dev->dev, kdata, len, DMA_TO_DEVICE);
dma_dest = dma_map_page(dev->dev, page, offset, len, DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, 0);
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
+ DMA_CTRL_ACK);
if (!tx) {
dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
@@ -533,7 +533,6 @@
return -ENOMEM;
}
- tx->ack = 1;
tx->callback = NULL;
cookie = tx->tx_submit(tx);
@@ -574,7 +573,8 @@
dma_src = dma_map_page(dev->dev, src_pg, src_off, len, DMA_TO_DEVICE);
dma_dest = dma_map_page(dev->dev, dest_pg, dest_off, len,
DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, 0);
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
+ DMA_CTRL_ACK);
if (!tx) {
dma_unmap_page(dev->dev, dma_src, len, DMA_TO_DEVICE);
@@ -582,7 +582,6 @@
return -ENOMEM;
}
- tx->ack = 1;
tx->callback = NULL;
cookie = tx->tx_submit(tx);
@@ -600,8 +599,6 @@
{
tx->chan = chan;
spin_lock_init(&tx->lock);
- INIT_LIST_HEAD(&tx->depend_node);
- INIT_LIST_HEAD(&tx->depend_list);
}
EXPORT_SYMBOL(dma_async_tx_descriptor_init);
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 7269230..054eabf 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -412,7 +412,7 @@
}
static struct dma_async_tx_descriptor *
-fsl_dma_prep_interrupt(struct dma_chan *chan)
+fsl_dma_prep_interrupt(struct dma_chan *chan, unsigned long flags)
{
struct fsl_dma_chan *fsl_chan;
struct fsl_desc_sw *new;
@@ -429,7 +429,7 @@
}
new->async_tx.cookie = -EBUSY;
- new->async_tx.ack = 0;
+ new->async_tx.flags = flags;
/* Insert the link descriptor to the LD ring */
list_add_tail(&new->node, &new->async_tx.tx_list);
@@ -482,7 +482,7 @@
set_desc_next(fsl_chan, &prev->hw, new->async_tx.phys);
new->async_tx.cookie = 0;
- new->async_tx.ack = 1;
+ async_tx_ack(&new->async_tx);
prev = new;
len -= copy;
@@ -493,7 +493,7 @@
list_add_tail(&new->node, &first->async_tx.tx_list);
} while (len);
- new->async_tx.ack = 0; /* client is in control of this ack */
+ new->async_tx.flags = flags; /* client is in control of this ack */
new->async_tx.cookie = -EBUSY;
/* Set End-of-link to the last link descriptor of new list*/
@@ -658,13 +658,6 @@
fsl_chan_xfer_ld_queue(fsl_chan);
}
-static void fsl_dma_dependency_added(struct dma_chan *chan)
-{
- struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
-
- fsl_chan_ld_cleanup(fsl_chan);
-}
-
/**
* fsl_dma_is_complete - Determine the DMA status
* @fsl_chan : Freescale DMA channel
@@ -696,6 +689,8 @@
{
struct fsl_dma_chan *fsl_chan = (struct fsl_dma_chan *)data;
u32 stat;
+ int update_cookie = 0;
+ int xfer_ld_q = 0;
stat = get_sr(fsl_chan);
dev_dbg(fsl_chan->dev, "event: channel %d, stat = 0x%x\n",
@@ -720,8 +715,8 @@
* Now, update the completed cookie, and continue the
* next uncompleted transfer.
*/
- fsl_dma_update_completed_cookie(fsl_chan);
- fsl_chan_xfer_ld_queue(fsl_chan);
+ update_cookie = 1;
+ xfer_ld_q = 1;
}
stat &= ~FSL_DMA_SR_PE;
}
@@ -734,19 +729,33 @@
dev_dbg(fsl_chan->dev, "event: clndar %p, nlndar %p\n",
(void *)get_cdar(fsl_chan), (void *)get_ndar(fsl_chan));
stat &= ~FSL_DMA_SR_EOSI;
- fsl_dma_update_completed_cookie(fsl_chan);
+ update_cookie = 1;
+ }
+
+ /* For MPC8349, EOCDI event need to update cookie
+ * and start the next transfer if it exist.
+ */
+ if (stat & FSL_DMA_SR_EOCDI) {
+ dev_dbg(fsl_chan->dev, "event: End-of-Chain link INT\n");
+ stat &= ~FSL_DMA_SR_EOCDI;
+ update_cookie = 1;
+ xfer_ld_q = 1;
}
/* If it current transfer is the end-of-transfer,
* we should clear the Channel Start bit for
* prepare next transfer.
*/
- if (stat & (FSL_DMA_SR_EOLNI | FSL_DMA_SR_EOCDI)) {
+ if (stat & FSL_DMA_SR_EOLNI) {
dev_dbg(fsl_chan->dev, "event: End-of-link INT\n");
stat &= ~FSL_DMA_SR_EOLNI;
- fsl_chan_xfer_ld_queue(fsl_chan);
+ xfer_ld_q = 1;
}
+ if (update_cookie)
+ fsl_dma_update_completed_cookie(fsl_chan);
+ if (xfer_ld_q)
+ fsl_chan_xfer_ld_queue(fsl_chan);
if (stat)
dev_dbg(fsl_chan->dev, "event: unhandled sr 0x%02x\n",
stat);
@@ -776,15 +785,13 @@
fsl_chan_ld_cleanup(fsl_chan);
}
-#ifdef FSL_DMA_CALLBACKTEST
-static void fsl_dma_callback_test(struct fsl_dma_chan *fsl_chan)
+static void fsl_dma_callback_test(void *param)
{
+ struct fsl_dma_chan *fsl_chan = param;
if (fsl_chan)
- dev_info(fsl_chan->dev, "selftest: callback is ok!\n");
+ dev_dbg(fsl_chan->dev, "selftest: callback is ok!\n");
}
-#endif
-#ifdef CONFIG_FSL_DMA_SELFTEST
static int fsl_dma_self_test(struct fsl_dma_chan *fsl_chan)
{
struct dma_chan *chan;
@@ -867,7 +874,7 @@
async_tx_ack(tx3);
/* Interrupt tx test */
- tx1 = fsl_dma_prep_interrupt(chan);
+ tx1 = fsl_dma_prep_interrupt(chan, 0);
async_tx_ack(tx1);
cookie = fsl_dma_tx_submit(tx1);
@@ -875,13 +882,11 @@
cookie = fsl_dma_tx_submit(tx3);
cookie = fsl_dma_tx_submit(tx2);
-#ifdef FSL_DMA_CALLBACKTEST
if (dma_has_cap(DMA_INTERRUPT, ((struct fsl_dma_device *)
dev_get_drvdata(fsl_chan->dev->parent))->common.cap_mask)) {
tx3->callback = fsl_dma_callback_test;
tx3->callback_param = fsl_chan;
}
-#endif
fsl_dma_memcpy_issue_pending(chan);
msleep(2);
@@ -906,7 +911,6 @@
kfree(src);
return err;
}
-#endif
static int __devinit of_fsl_dma_chan_probe(struct of_device *dev,
const struct of_device_id *match)
@@ -997,11 +1001,9 @@
}
}
-#ifdef CONFIG_FSL_DMA_SELFTEST
err = fsl_dma_self_test(new_fsl_chan);
if (err)
goto err;
-#endif
dev_info(&dev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
match->compatible, new_fsl_chan->irq);
@@ -1021,11 +1023,11 @@
static struct of_device_id of_fsl_dma_chan_ids[] = {
{
- .compatible = "fsl,mpc8540-dma-channel",
+ .compatible = "fsl,eloplus-dma-channel",
.data = (void *)&mpc8540_dma_ip_feature,
},
{
- .compatible = "fsl,mpc8349-dma-channel",
+ .compatible = "fsl,elo-dma-channel",
.data = (void *)&mpc8349_dma_ip_feature,
},
{}
@@ -1080,7 +1082,6 @@
fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy;
fdev->common.device_is_tx_complete = fsl_dma_is_complete;
fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending;
- fdev->common.device_dependency_added = fsl_dma_dependency_added;
fdev->common.dev = &dev->dev;
irq = irq_of_parse_and_map(dev->node, 0);
@@ -1107,8 +1108,8 @@
}
static struct of_device_id of_fsl_dma_ids[] = {
- { .compatible = "fsl,mpc8540-dma", },
- { .compatible = "fsl,mpc8349-dma", },
+ { .compatible = "fsl,eloplus-dma", },
+ { .compatible = "fsl,elo-dma", },
{}
};
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index 4017d9e..318e8a2 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -212,14 +212,14 @@
u32 copy;
size_t len;
dma_addr_t src, dst;
- int orig_ack;
+ unsigned long orig_flags;
unsigned int desc_count = 0;
/* src and dest and len are stored in the initial descriptor */
len = first->len;
src = first->src;
dst = first->dst;
- orig_ack = first->async_tx.ack;
+ orig_flags = first->async_tx.flags;
new = first;
spin_lock_bh(&ioat_chan->desc_lock);
@@ -228,7 +228,7 @@
do {
copy = min_t(size_t, len, ioat_chan->xfercap);
- new->async_tx.ack = 1;
+ async_tx_ack(&new->async_tx);
hw = new->hw;
hw->size = copy;
@@ -264,7 +264,7 @@
}
new->tx_cnt = desc_count;
- new->async_tx.ack = orig_ack; /* client is in control of this ack */
+ new->async_tx.flags = orig_flags; /* client is in control of this ack */
/* store the original values for use in later cleanup */
if (new != first) {
@@ -304,14 +304,14 @@
u32 copy;
size_t len;
dma_addr_t src, dst;
- int orig_ack;
+ unsigned long orig_flags;
unsigned int desc_count = 0;
/* src and dest and len are stored in the initial descriptor */
len = first->len;
src = first->src;
dst = first->dst;
- orig_ack = first->async_tx.ack;
+ orig_flags = first->async_tx.flags;
new = first;
/*
@@ -321,7 +321,7 @@
do {
copy = min_t(size_t, len, ioat_chan->xfercap);
- new->async_tx.ack = 1;
+ async_tx_ack(&new->async_tx);
hw = new->hw;
hw->size = copy;
@@ -349,7 +349,7 @@
}
new->tx_cnt = desc_count;
- new->async_tx.ack = orig_ack; /* client is in control of this ack */
+ new->async_tx.flags = orig_flags; /* client is in control of this ack */
/* store the original values for use in later cleanup */
if (new != first) {
@@ -714,7 +714,7 @@
new->len = len;
new->dst = dma_dest;
new->src = dma_src;
- new->async_tx.ack = 0;
+ new->async_tx.flags = flags;
return &new->async_tx;
} else
return NULL;
@@ -742,7 +742,7 @@
new->len = len;
new->dst = dma_dest;
new->src = dma_src;
- new->async_tx.ack = 0;
+ new->async_tx.flags = flags;
return &new->async_tx;
} else
return NULL;
@@ -842,7 +842,7 @@
* a completed entry, but not the last, so clean
* up if the client is done with the descriptor
*/
- if (desc->async_tx.ack) {
+ if (async_tx_test_ack(&desc->async_tx)) {
list_del(&desc->node);
list_add_tail(&desc->node,
&ioat_chan->free_desc);
@@ -924,17 +924,6 @@
spin_unlock_bh(&ioat_chan->cleanup_lock);
}
-static void ioat_dma_dependency_added(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- spin_lock_bh(&ioat_chan->desc_lock);
- if (ioat_chan->pending == 0) {
- spin_unlock_bh(&ioat_chan->desc_lock);
- ioat_dma_memcpy_cleanup(ioat_chan);
- } else
- spin_unlock_bh(&ioat_chan->desc_lock);
-}
-
/**
* ioat_dma_is_complete - poll the status of a IOAT DMA transaction
* @chan: IOAT DMA channel handle
@@ -990,7 +979,7 @@
desc->hw->size = 0;
desc->hw->src_addr = 0;
desc->hw->dst_addr = 0;
- desc->async_tx.ack = 1;
+ async_tx_ack(&desc->async_tx);
switch (ioat_chan->device->version) {
case IOAT_VER_1_2:
desc->hw->next = 0;
@@ -1316,7 +1305,6 @@
dma_cap_set(DMA_MEMCPY, device->common.cap_mask);
device->common.device_is_tx_complete = ioat_dma_is_complete;
- device->common.device_dependency_added = ioat_dma_dependency_added;
switch (device->version) {
case IOAT_VER_1_2:
device->common.device_prep_dma_memcpy = ioat1_dma_prep_memcpy;
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index f82b090..762b729 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -63,7 +63,6 @@
struct iop_adma_chan *iop_chan, dma_cookie_t cookie)
{
BUG_ON(desc->async_tx.cookie < 0);
- spin_lock_bh(&desc->async_tx.lock);
if (desc->async_tx.cookie > 0) {
cookie = desc->async_tx.cookie;
desc->async_tx.cookie = 0;
@@ -101,7 +100,6 @@
/* run dependent operations */
async_tx_run_dependencies(&desc->async_tx);
- spin_unlock_bh(&desc->async_tx.lock);
return cookie;
}
@@ -113,7 +111,7 @@
/* the client is allowed to attach dependent operations
* until 'ack' is set
*/
- if (!desc->async_tx.ack)
+ if (!async_tx_test_ack(&desc->async_tx))
return 0;
/* leave the last descriptor in the chain
@@ -150,7 +148,7 @@
"this_desc: %#x next_desc: %#x ack: %d\n",
iter->async_tx.cookie, iter->idx, busy,
iter->async_tx.phys, iop_desc_get_next_desc(iter),
- iter->async_tx.ack);
+ async_tx_test_ack(&iter->async_tx));
prefetch(_iter);
prefetch(&_iter->async_tx);
@@ -257,8 +255,6 @@
BUG_ON(!seen_current);
- iop_chan_idle(busy, iop_chan);
-
if (cookie > 0) {
iop_chan->completed_cookie = cookie;
pr_debug("\tcompleted cookie %d\n", cookie);
@@ -275,8 +271,11 @@
static void iop_adma_tasklet(unsigned long data)
{
- struct iop_adma_chan *chan = (struct iop_adma_chan *) data;
- __iop_adma_slot_cleanup(chan);
+ struct iop_adma_chan *iop_chan = (struct iop_adma_chan *) data;
+
+ spin_lock(&iop_chan->lock);
+ __iop_adma_slot_cleanup(iop_chan);
+ spin_unlock(&iop_chan->lock);
}
static struct iop_adma_desc_slot *
@@ -339,9 +338,7 @@
/* pre-ack all but the last descriptor */
if (num_slots != slots_per_op)
- iter->async_tx.ack = 1;
- else
- iter->async_tx.ack = 0;
+ async_tx_ack(&iter->async_tx);
list_add_tail(&iter->chain_node, &chain);
alloc_tail = iter;
@@ -514,7 +511,7 @@
}
static struct dma_async_tx_descriptor *
-iop_adma_prep_dma_interrupt(struct dma_chan *chan)
+iop_adma_prep_dma_interrupt(struct dma_chan *chan, unsigned long flags)
{
struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
struct iop_adma_desc_slot *sw_desc, *grp_start;
@@ -529,6 +526,7 @@
grp_start = sw_desc->group_head;
iop_desc_init_interrupt(grp_start, iop_chan);
grp_start->unmap_len = 0;
+ sw_desc->async_tx.flags = flags;
}
spin_unlock_bh(&iop_chan->lock);
@@ -561,6 +559,7 @@
iop_desc_set_memcpy_src_addr(grp_start, dma_src);
sw_desc->unmap_src_cnt = 1;
sw_desc->unmap_len = len;
+ sw_desc->async_tx.flags = flags;
}
spin_unlock_bh(&iop_chan->lock);
@@ -593,6 +592,7 @@
iop_desc_set_dest_addr(grp_start, iop_chan, dma_dest);
sw_desc->unmap_src_cnt = 1;
sw_desc->unmap_len = len;
+ sw_desc->async_tx.flags = flags;
}
spin_unlock_bh(&iop_chan->lock);
@@ -626,6 +626,7 @@
iop_desc_set_dest_addr(grp_start, iop_chan, dma_dest);
sw_desc->unmap_src_cnt = src_cnt;
sw_desc->unmap_len = len;
+ sw_desc->async_tx.flags = flags;
while (src_cnt--)
iop_desc_set_xor_src_addr(grp_start, src_cnt,
dma_src[src_cnt]);
@@ -662,6 +663,7 @@
__func__, grp_start->xor_check_result);
sw_desc->unmap_src_cnt = src_cnt;
sw_desc->unmap_len = len;
+ sw_desc->async_tx.flags = flags;
while (src_cnt--)
iop_desc_set_zero_sum_src_addr(grp_start, src_cnt,
dma_src[src_cnt]);
@@ -671,12 +673,6 @@
return sw_desc ? &sw_desc->async_tx : NULL;
}
-static void iop_adma_dependency_added(struct dma_chan *chan)
-{
- struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
- tasklet_schedule(&iop_chan->irq_tasklet);
-}
-
static void iop_adma_free_chan_resources(struct dma_chan *chan)
{
struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
@@ -854,11 +850,11 @@
src_dma = dma_map_single(dma_chan->device->dev, src,
IOP_ADMA_TEST_SIZE, DMA_TO_DEVICE);
tx = iop_adma_prep_dma_memcpy(dma_chan, dest_dma, src_dma,
- IOP_ADMA_TEST_SIZE, 1);
+ IOP_ADMA_TEST_SIZE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
cookie = iop_adma_tx_submit(tx);
iop_adma_issue_pending(dma_chan);
- async_tx_ack(tx);
msleep(1);
if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) !=
@@ -954,11 +950,11 @@
dma_srcs[i] = dma_map_page(dma_chan->device->dev, xor_srcs[i],
0, PAGE_SIZE, DMA_TO_DEVICE);
tx = iop_adma_prep_dma_xor(dma_chan, dest_dma, dma_srcs,
- IOP_ADMA_NUM_SRC_TEST, PAGE_SIZE, 1);
+ IOP_ADMA_NUM_SRC_TEST, PAGE_SIZE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
cookie = iop_adma_tx_submit(tx);
iop_adma_issue_pending(dma_chan);
- async_tx_ack(tx);
msleep(8);
if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) !=
@@ -1001,11 +997,11 @@
DMA_TO_DEVICE);
tx = iop_adma_prep_dma_zero_sum(dma_chan, dma_srcs,
IOP_ADMA_NUM_SRC_TEST + 1, PAGE_SIZE,
- &zero_sum_result, 1);
+ &zero_sum_result,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
cookie = iop_adma_tx_submit(tx);
iop_adma_issue_pending(dma_chan);
- async_tx_ack(tx);
msleep(8);
if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
@@ -1025,11 +1021,11 @@
/* test memset */
dma_addr = dma_map_page(dma_chan->device->dev, dest, 0,
PAGE_SIZE, DMA_FROM_DEVICE);
- tx = iop_adma_prep_dma_memset(dma_chan, dma_addr, 0, PAGE_SIZE, 1);
+ tx = iop_adma_prep_dma_memset(dma_chan, dma_addr, 0, PAGE_SIZE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
cookie = iop_adma_tx_submit(tx);
iop_adma_issue_pending(dma_chan);
- async_tx_ack(tx);
msleep(8);
if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
@@ -1057,11 +1053,11 @@
DMA_TO_DEVICE);
tx = iop_adma_prep_dma_zero_sum(dma_chan, dma_srcs,
IOP_ADMA_NUM_SRC_TEST + 1, PAGE_SIZE,
- &zero_sum_result, 1);
+ &zero_sum_result,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
cookie = iop_adma_tx_submit(tx);
iop_adma_issue_pending(dma_chan);
- async_tx_ack(tx);
msleep(8);
if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
@@ -1177,7 +1173,6 @@
dma_dev->device_free_chan_resources = iop_adma_free_chan_resources;
dma_dev->device_is_tx_complete = iop_adma_is_complete;
dma_dev->device_issue_pending = iop_adma_issue_pending;
- dma_dev->device_dependency_added = iop_adma_dependency_added;
dma_dev->dev = &pdev->dev;
/* set prep routines based on capability */
@@ -1232,9 +1227,6 @@
}
spin_lock_init(&iop_chan->lock);
- init_timer(&iop_chan->cleanup_watchdog);
- iop_chan->cleanup_watchdog.data = (unsigned long) iop_chan;
- iop_chan->cleanup_watchdog.function = iop_adma_tasklet;
INIT_LIST_HEAD(&iop_chan->chain);
INIT_LIST_HEAD(&iop_chan->all_slots);
INIT_RCU_HEAD(&iop_chan->common.rcu);
@@ -1298,7 +1290,7 @@
grp_start = sw_desc->group_head;
list_splice_init(&sw_desc->async_tx.tx_list, &iop_chan->chain);
- sw_desc->async_tx.ack = 1;
+ async_tx_ack(&sw_desc->async_tx);
iop_desc_init_memcpy(grp_start, 0);
iop_desc_set_byte_count(grp_start, iop_chan, 0);
iop_desc_set_dest_addr(grp_start, iop_chan, 0);
@@ -1354,7 +1346,7 @@
if (sw_desc) {
grp_start = sw_desc->group_head;
list_splice_init(&sw_desc->async_tx.tx_list, &iop_chan->chain);
- sw_desc->async_tx.ack = 1;
+ async_tx_ack(&sw_desc->async_tx);
iop_desc_init_null_xor(grp_start, 2, 0);
iop_desc_set_byte_count(grp_start, iop_chan, 0);
iop_desc_set_dest_addr(grp_start, iop_chan, 0);
diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c
index 996d61f..ca6d51e 100644
--- a/drivers/firewire/fw-ohci.c
+++ b/drivers/firewire/fw-ohci.c
@@ -401,7 +401,8 @@
if (d->res_count == 0) {
size_t size, rest, offset;
- dma_addr_t buffer_bus;
+ dma_addr_t start_bus;
+ void *start;
/*
* This descriptor is finished and we may have a
@@ -410,9 +411,9 @@
*/
offset = offsetof(struct ar_buffer, data);
- buffer_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
+ start = buffer = ab;
+ start_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
- buffer = ab;
ab = ab->next;
d = &ab->descriptor;
size = buffer + PAGE_SIZE - ctx->pointer;
@@ -427,7 +428,7 @@
buffer = handle_ar_packet(ctx, buffer);
dma_free_coherent(ohci->card.device, PAGE_SIZE,
- buffer, buffer_bus);
+ start, start_bus);
ar_context_add_page(ctx);
} else {
buffer = ctx->pointer;
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 4072449..c5e3ed7 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -266,7 +266,7 @@
dev->name = "IPMI controller";
dev->device_data = data;
- list_add(&dev->list, &dmi_devices);
+ list_add_tail(&dev->list, &dmi_devices);
}
static void __init dmi_save_extended_devices(const struct dmi_header *dm)
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 5c85670..f942ecd 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1367,7 +1367,8 @@
/* Reserve the ISA region */
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!request_region(res->start, W83781D_EXTENT, "w83781d")) {
+ if (!request_region(res->start + W83781D_ADDR_REG_OFFSET, 2,
+ "w83781d")) {
err = -EBUSY;
goto exit;
}
@@ -1415,7 +1416,7 @@
device_remove_file(&pdev->dev, &dev_attr_name);
kfree(data);
exit_release_region:
- release_region(res->start, W83781D_EXTENT);
+ release_region(res->start + W83781D_ADDR_REG_OFFSET, 2);
exit:
return err;
}
@@ -1429,7 +1430,7 @@
sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
device_remove_file(&pdev->dev, &dev_attr_name);
- release_region(data->client.addr, W83781D_EXTENT);
+ release_region(data->client.addr + W83781D_ADDR_REG_OFFSET, 2);
kfree(data);
return 0;
@@ -1797,8 +1798,17 @@
{
int val, save, found = 0;
- if (!request_region(address, W83781D_EXTENT, "w83781d"))
+ /* We have to request the region in two parts because some
+ boards declare base+4 to base+7 as a PNP device */
+ if (!request_region(address, 4, "w83781d")) {
+ pr_debug("w83781d: Failed to request low part of region\n");
return 0;
+ }
+ if (!request_region(address + 4, 4, "w83781d")) {
+ pr_debug("w83781d: Failed to request high part of region\n");
+ release_region(address, 4);
+ return 0;
+ }
#define REALLY_SLOW_IO
/* We need the timeouts for at least some W83781D-like
@@ -1871,7 +1881,8 @@
val == 0x30 ? "W83782D" : "W83781D", (int)address);
release:
- release_region(address, W83781D_EXTENT);
+ release_region(address + 4, 4);
+ release_region(address, 4);
return found;
}
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index cce5a61..fde2634 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -382,9 +382,8 @@
break;
case DAVINCI_I2C_IVR_ARDY:
- w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
- MOD_REG_BIT(w, DAVINCI_I2C_STR_ARDY, 1);
- davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
+ davinci_i2c_write_reg(dev,
+ DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
complete(&dev->cmd_complete);
break;
@@ -397,12 +396,9 @@
if (dev->buf_len)
continue;
- w = davinci_i2c_read_reg(dev,
- DAVINCI_I2C_STR_REG);
- MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 0);
davinci_i2c_write_reg(dev,
- DAVINCI_I2C_STR_REG,
- w);
+ DAVINCI_I2C_STR_REG,
+ DAVINCI_I2C_IMR_RRDY);
} else
dev_err(dev->dev, "RDR IRQ while no "
"data requested\n");
@@ -428,9 +424,8 @@
break;
case DAVINCI_I2C_IVR_SCD:
- w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
- MOD_REG_BIT(w, DAVINCI_I2C_STR_SCD, 1);
- davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
+ davinci_i2c_write_reg(dev,
+ DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD);
complete(&dev->cmd_complete);
break;
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 7c7eb0c..22bb247 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -55,7 +55,7 @@
static int iic_force_fast;
module_param(iic_force_fast, bool, 0);
-MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)");
+MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)");
#define DBG_LEVEL 0
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index cb9abe7..b1c050f 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -131,11 +131,15 @@
/* ----- begin of usb layer ---------------------------------------------- */
-/* The usb i2c interface uses a vid/pid pair donated by */
-/* Future Technology Devices International Ltd. */
+/*
+ * Initially the usb i2c interface uses a vid/pid pair donated by
+ * Future Technology Devices International Ltd., later a pair was
+ * bought from EZPrototypes
+ */
static struct usb_device_id i2c_tiny_usb_table [] = {
- { USB_DEVICE(0x0403, 0xc631) },
- { } /* Terminating entry */
+ { USB_DEVICE(0x0403, 0xc631) }, /* FTDI */
+ { USB_DEVICE(0x1c40, 0x0534) }, /* EZPrototypes */
+ { } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table);
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index eed6d8e..8753203 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -122,24 +122,6 @@
If unsure, say N.
-config BLK_DEV_HD_IDE
- bool "Use old disk-only driver on primary interface"
- depends on (X86 || SH_MPC1211)
- ---help---
- There are two drivers for MFM/RLL/IDE disks. Most people use just
- the new enhanced driver by itself. This option however installs the
- old hard disk driver to control the primary IDE/disk interface in
- the system, leaving the new enhanced IDE driver to take care of only
- the 2nd/3rd/4th IDE interfaces. Doing this will prevent you from
- having an IDE/ATAPI CD-ROM or tape drive connected to the primary
- IDE interface. Choosing this option may be useful for older systems
- which have MFM/RLL/ESDI controller+drives at the primary port
- address (0x1f0), along with IDE drives at the secondary/3rd/4th port
- addresses.
-
- Normally, just say N here; you will then use the new driver for all
- 4 interfaces.
-
config BLK_DEV_IDEDISK
tristate "Include IDE/ATA-2 DISK support"
---help---
@@ -325,6 +307,7 @@
config IDE_GENERIC
tristate "generic/default IDE chipset support"
+ depends on ALPHA || X86 || IA64 || M32R || MIPS || PPC32
help
If unsure, say N.
@@ -416,12 +399,6 @@
This can improve the usability of some boot managers such as lilo
when booting from a drive on an off-board controller.
- If you say Y here, and you actually want to reverse the device scan
- order as explained above, you also need to issue the kernel command
- line option "ide=reverse". (Try "man bootparam" or see the
- documentation of your boot loader (lilo or loadlin) about how to
- pass options to the kernel at boot time.)
-
Note that, if you do this, the order of the hd* devices will be
rearranged which may require modification of fstab and other files.
@@ -615,8 +592,7 @@
reference to device 0x80. The other solution is to say Y to "Boot
off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless
your mother board has the chipset natively mounted. Regardless one
- should use the fore mentioned option and call at LILO or include
- "ide=reverse" in LILO's append-line.
+ should use the fore mentioned option and call at LILO.
This driver requires dynamic tuning of the chipset during the
ide-probe at boot. It is reported to support DVD II drives, by the
@@ -1049,7 +1025,7 @@
endchoice
# no isa -> no vlb
-if ISA
+if ISA && (ALPHA || X86 || MIPS)
comment "Other IDE chipsets support"
comment "Note: most of these also require special kernel boot parameters"
@@ -1060,8 +1036,8 @@
Certain older chipsets, including the Tekram 690CD, use a single set
of I/O ports at 0x1f0 to control up to four drives, instead of the
customary two drives per port. Support for this can be enabled at
- runtime using the "ide0=four" kernel boot parameter if you say Y
- here.
+ runtime using the "ide-4drives.probe" kernel boot parameter if you
+ say Y here.
config BLK_DEV_ALI14XX
tristate "ALI M14xx support"
@@ -1114,14 +1090,10 @@
def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-config IDE_ARCH_OBSOLETE_INIT
- def_bool ALPHA || (ARM && !ARCH_L7200) || BLACKFIN || X86 || IA64 || M32R || MIPS || PARISC || PPC || (SUPERH64 && BLK_DEV_IDEPCI) || SPARC
-
endif
config BLK_DEV_HD_ONLY
bool "Old hard disk (MFM/RLL/IDE) driver"
- depends on BLK_DEV_IDE=n
help
There are two drivers for MFM/RLL/IDE hard disks. Most people use
the newer enhanced driver, but this old one is still around for two
@@ -1133,12 +1105,16 @@
for systems with only older MFM/RLL/ESDI drives. Choosing the old
driver can save 13 KB or so of kernel memory.
+ If you want to use this driver together with the new one you have
+ to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new
+ driver from probing the primary interface.
+
If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver
instead of this one. For more detailed information, read the
Disk-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
config BLK_DEV_HD
- def_bool BLK_DEV_HD_IDE || BLK_DEV_HD_ONLY
+ def_bool BLK_DEV_HD_ONLY
endif # IDE
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index a4a4323..571544c 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -36,9 +36,9 @@
endif
obj-$(CONFIG_BLK_DEV_IDE) += cris/ ppc/
-obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
+obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c
index 161d30c..ec46c44 100644
--- a/drivers/ide/arm/bast-ide.c
+++ b/drivers/ide/arm/bast-ide.c
@@ -41,15 +41,15 @@
hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20);
hw.irq = irq;
- hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+ hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL)
goto out;
i = hwif->index;
if (hwif->present)
- ide_unregister(i, 0, 0);
- else if (!hwif->hold)
+ ide_unregister(i);
+ else
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 43a70e9..be9ff73 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -46,3 +46,5 @@
}
module_init(ide_arm_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 8e1f6bd..474162c 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -378,15 +378,15 @@
hw.irq = irq->start;
hw.chipset = ide_palm3710;
- hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+ hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL)
goto out;
i = hwif->index;
if (hwif->present)
- ide_unregister(i, 0, 0);
- else if (!hwif->hold)
+ ide_unregister(i);
+ else
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index efba00d..b30adcf 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -76,7 +76,7 @@
ecard_set_drvdata(ec, NULL);
- ide_unregister(hwif->index, 0, 0);
+ ide_unregister(hwif->index);
ecard_release_resources(ec);
}
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index e79bf8f..31266d2 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -228,7 +228,10 @@
static void
cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir,int type,int len)
{
- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, IDE_DATA_REG);
+ ide_hwif_t *hwif = drive->hwif;
+
+ reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int,
+ hwif->io_ports[IDE_DATA_OFFSET]);
reg_ata_rw_trf_cnt trf_cnt = {0};
mycontext.saved_data = (dma_descr_data*)virt_to_phys(d);
@@ -264,8 +267,12 @@
static int cris_dma_test_irq(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
int intr = REG_RD_INT(ata, regi_ata, r_intr);
- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int, IDE_DATA_REG);
+
+ reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, int,
+ hwif->io_ports[IDE_DATA_OFFSET]);
+
return intr & (1 << ctrl2.sel) ? 1 : 0;
}
@@ -523,7 +530,8 @@
IO_STATE(R_ATA_CTRL_DATA, handsh, dma);
*R_ATA_CTRL_DATA =
cmd |
- IO_FIELD(R_ATA_CTRL_DATA, data, IDE_DATA_REG) |
+ IO_FIELD(R_ATA_CTRL_DATA, data,
+ drive->hwif->io_ports[IDE_DATA_OFFSET]) |
IO_STATE(R_ATA_CTRL_DATA, src_dst, dma) |
IO_STATE(R_ATA_CTRL_DATA, multi, on) |
IO_STATE(R_ATA_CTRL_DATA, dma_size, word);
@@ -541,7 +549,9 @@
static int cris_dma_test_irq(ide_drive_t *drive)
{
int intr = *R_IRQ_MASK0_RD;
- int bus = IO_EXTRACT(R_ATA_CTRL_DATA, sel, IDE_DATA_REG);
+ int bus = IO_EXTRACT(R_ATA_CTRL_DATA, sel,
+ drive->hwif->io_ports[IDE_DATA_OFFSET]);
+
return intr & (1 << (bus + IO_BITNR(R_IRQ_MASK0_RD, ata_irq0))) ? 1 : 0;
}
@@ -1067,3 +1077,5 @@
}
module_init(init_e100_ide);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 520aec0..4108ec4 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -110,6 +110,7 @@
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
hwif_setup(hwif);
+ hwif->host_flags = IDE_HFLAG_NO_IO_32BIT;
printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index);
idx[0] = index;
@@ -125,3 +126,5 @@
}
module_init(h8300_ide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index e07b189..0f6fb6b 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -710,6 +710,8 @@
for (i = 0; i < MAX_DRIVES; i++) {
drive = &hwif->drives[i];
+ memset(drive->acpidata, 0, sizeof(*drive->acpidata));
+
if (!drive->present)
continue;
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index c8d0e87..3960002 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -542,7 +542,8 @@
/* packet command */
spin_lock_irqsave(&ide_lock, flags);
- hwif->OUTBSYNC(drive, WIN_PACKETCMD, IDE_COMMAND_REG);
+ hwif->OUTBSYNC(drive, WIN_PACKETCMD,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
ndelay(400);
spin_unlock_irqrestore(&ide_lock, flags);
@@ -992,6 +993,7 @@
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
struct cdrom_info *info = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
xfer_func_t *xferfunc;
@@ -1032,9 +1034,9 @@
/*
* ok we fall to pio :/
*/
- ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
- lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
- highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]) & 0x3;
+ lowcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]);
+ highcyl = hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]);
len = lowcyl + (256 * highcyl);
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index faf22d7..5f133df 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -78,40 +78,6 @@
*/
#define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES)
-typedef struct idefloppy_packet_command_s {
- u8 c[12]; /* Actual packet bytes */
- int retries; /* On each retry, we increment
- retries */
- int error; /* Error code */
- int request_transfer; /* Bytes to transfer */
- int actually_transferred; /* Bytes actually transferred */
- int buffer_size; /* Size of our data buffer */
- int b_count; /* Missing/Available data on
- the current buffer */
- struct request *rq; /* The corresponding request */
- u8 *buffer; /* Data buffer */
- u8 *current_position; /* Pointer into above buffer */
- void (*callback) (ide_drive_t *); /* Called when this packet
- command is completed */
- u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */
- unsigned long flags; /* Status/Action bit flags: long
- for set_bit */
-} idefloppy_pc_t;
-
-/* Packet command flag bits. */
-enum {
- /* 1 when we prefer to use DMA if possible */
- PC_FLAG_DMA_RECOMMENDED = (1 << 0),
- /* 1 while DMA in progress */
- PC_FLAG_DMA_IN_PROGRESS = (1 << 1),
- /* 1 when encountered problem during DMA */
- PC_FLAG_DMA_ERROR = (1 << 2),
- /* Data direction */
- PC_FLAG_WRITING = (1 << 3),
- /* Suppress error reporting */
- PC_FLAG_SUPPRESS_ERROR = (1 << 4),
-};
-
/* format capacities descriptor codes */
#define CAPACITY_INVALID 0x00
#define CAPACITY_UNFORMATTED 0x01
@@ -131,11 +97,11 @@
unsigned int openers; /* protected by BKL for now */
/* Current packet command */
- idefloppy_pc_t *pc;
+ struct ide_atapi_pc *pc;
/* Last failed packet command */
- idefloppy_pc_t *failed_pc;
+ struct ide_atapi_pc *failed_pc;
/* Packet command stack */
- idefloppy_pc_t pc_stack[IDEFLOPPY_PC_STACK];
+ struct ide_atapi_pc pc_stack[IDEFLOPPY_PC_STACK];
/* Next free packet command storage space */
int pc_stack_index;
struct request rq_stack[IDEFLOPPY_PC_STACK];
@@ -195,32 +161,6 @@
#define IDEFLOPPY_ERROR_GENERAL 101
/*
- * The following is used to format the general configuration word of the
- * ATAPI IDENTIFY DEVICE command.
- */
-struct idefloppy_id_gcw {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
- unsigned packet_size :2; /* Packet Size */
- unsigned reserved234 :3; /* Reserved */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned removable :1; /* Removable media */
- unsigned device_type :5; /* Device type */
- unsigned reserved13 :1; /* Reserved */
- unsigned protocol :2; /* Protocol type */
-#elif defined(__BIG_ENDIAN_BITFIELD)
- unsigned protocol :2; /* Protocol type */
- unsigned reserved13 :1; /* Reserved */
- unsigned device_type :5; /* Device type */
- unsigned removable :1; /* Removable media */
- unsigned drq_type :2; /* Command packet DRQ type */
- unsigned reserved234 :3; /* Reserved */
- unsigned packet_size :2; /* Packet Size */
-#else
-#error "Bitfield endianness not defined! Check your byteorder.h"
-#endif
-};
-
-/*
* Pages of the SELECT SENSE / MODE SENSE packet commands.
* See SFF-8070i spec.
*/
@@ -256,27 +196,10 @@
}
/*
- * Too bad. The drive wants to send us data which we are not ready to accept.
- * Just throw it away.
- */
-static void idefloppy_discard_data(ide_drive_t *drive, unsigned int bcount)
-{
- while (bcount--)
- (void) HWIF(drive)->INB(IDE_DATA_REG);
-}
-
-static void idefloppy_write_zeros(ide_drive_t *drive, unsigned int bcount)
-{
- while (bcount--)
- HWIF(drive)->OUTB(0, IDE_DATA_REG);
-}
-
-
-/*
* Used to finish servicing a request. For read/write requests, we will call
* ide_end_request to pass to the next buffer.
*/
-static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs)
+static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
{
idefloppy_floppy_t *floppy = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
@@ -305,7 +228,7 @@
return 0;
}
-static void ide_floppy_io_buffers(ide_drive_t *drive, idefloppy_pc_t *pc,
+static void ide_floppy_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount, int direction)
{
struct request *rq = pc->rq;
@@ -333,26 +256,26 @@
done += count;
}
- idefloppy_do_end_request(drive, 1, done >> 9);
+ idefloppy_end_request(drive, 1, done >> 9);
if (bcount) {
printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n",
drive->name, __func__, bcount);
if (direction)
- idefloppy_write_zeros(drive, bcount);
+ ide_atapi_write_zeros(drive, bcount);
else
- idefloppy_discard_data(drive, bcount);
-
+ ide_atapi_discard_data(drive, bcount);
}
}
-static void idefloppy_update_buffers(ide_drive_t *drive, idefloppy_pc_t *pc)
+static void idefloppy_update_buffers(ide_drive_t *drive,
+ struct ide_atapi_pc *pc)
{
struct request *rq = pc->rq;
struct bio *bio = rq->bio;
while ((bio = rq->bio) != NULL)
- idefloppy_do_end_request(drive, 1, 0);
+ idefloppy_end_request(drive, 1, 0);
}
/*
@@ -360,7 +283,7 @@
* the current request so that it will be processed immediately, on the next
* pass through the driver.
*/
-static void idefloppy_queue_pc_head(ide_drive_t *drive, idefloppy_pc_t *pc,
+static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
struct request *rq)
{
struct ide_floppy_obj *floppy = drive->driver_data;
@@ -372,7 +295,7 @@
(void) ide_do_drive_cmd(drive, rq, ide_preempt);
}
-static idefloppy_pc_t *idefloppy_next_pc_storage(ide_drive_t *drive)
+static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -393,7 +316,7 @@
static void idefloppy_request_sense_callback(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- u8 *buf = floppy->pc->buffer;
+ u8 *buf = floppy->pc->buf;
debug_log("Reached %s\n", __func__);
@@ -418,11 +341,11 @@
floppy->ascq);
- idefloppy_do_end_request(drive, 1, 0);
+ idefloppy_end_request(drive, 1, 0);
} else {
printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting"
" request!\n");
- idefloppy_do_end_request(drive, 0, 0);
+ idefloppy_end_request(drive, 0, 0);
}
}
@@ -433,27 +356,27 @@
debug_log("Reached %s\n", __func__);
- idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0);
+ idefloppy_end_request(drive, floppy->pc->error ? 0 : 1, 0);
}
-static void idefloppy_init_pc(idefloppy_pc_t *pc)
+static void idefloppy_init_pc(struct ide_atapi_pc *pc)
{
memset(pc->c, 0, 12);
pc->retries = 0;
pc->flags = 0;
- pc->request_transfer = 0;
- pc->buffer = pc->pc_buffer;
- pc->buffer_size = IDEFLOPPY_PC_BUFFER_SIZE;
- pc->callback = &idefloppy_pc_callback;
+ pc->req_xfer = 0;
+ pc->buf = pc->pc_buf;
+ pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE;
+ pc->idefloppy_callback = &idefloppy_pc_callback;
}
-static void idefloppy_create_request_sense_cmd(idefloppy_pc_t *pc)
+static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_REQUEST_SENSE;
pc->c[4] = 255;
- pc->request_transfer = 18;
- pc->callback = &idefloppy_request_sense_callback;
+ pc->req_xfer = 18;
+ pc->idefloppy_callback = &idefloppy_request_sense_callback;
}
/*
@@ -462,7 +385,7 @@
*/
static void idefloppy_retry_pc(ide_drive_t *drive)
{
- idefloppy_pc_t *pc;
+ struct ide_atapi_pc *pc;
struct request *rq;
(void)ide_read_error(drive);
@@ -477,7 +400,7 @@
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
- idefloppy_pc_t *pc = floppy->pc;
+ struct ide_atapi_pc *pc = floppy->pc;
struct request *rq = pc->rq;
xfer_func_t *xferfunc;
unsigned int temp;
@@ -494,7 +417,7 @@
rq_data_dir(rq) ? "write" : "read");
pc->flags |= PC_FLAG_DMA_ERROR;
} else {
- pc->actually_transferred = pc->request_transfer;
+ pc->xferred = pc->req_xfer;
idefloppy_update_buffers(drive, pc);
}
debug_log("DMA finished\n");
@@ -506,7 +429,7 @@
/* No more interrupts */
if ((stat & DRQ_STAT) == 0) {
debug_log("Packet command completed, %d bytes transferred\n",
- pc->actually_transferred);
+ pc->xferred);
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
local_irq_enable_in_hardirq();
@@ -529,7 +452,7 @@
if (floppy->failed_pc == pc)
floppy->failed_pc = NULL;
/* Command finished - Call the callback function */
- pc->callback(drive);
+ pc->idefloppy_callback(drive);
return ide_stopped;
}
@@ -542,10 +465,10 @@
}
/* Get the number of bytes to transfer */
- bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) |
- hwif->INB(IDE_BCOUNTL_REG);
+ bcount = (hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]) << 8) |
+ hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]);
/* on this interrupt */
- ireason = hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);
if (ireason & CD) {
printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__);
@@ -561,13 +484,13 @@
}
if (!(pc->flags & PC_FLAG_WRITING)) {
/* Reading - Check that we have enough space */
- temp = pc->actually_transferred + bcount;
- if (temp > pc->request_transfer) {
- if (temp > pc->buffer_size) {
+ temp = pc->xferred + bcount;
+ if (temp > pc->req_xfer) {
+ if (temp > pc->buf_size) {
printk(KERN_ERR "ide-floppy: The floppy wants "
"to send us more data than expected "
"- discarding data\n");
- idefloppy_discard_data(drive, bcount);
+ ide_atapi_discard_data(drive, bcount);
ide_set_handler(drive,
&idefloppy_pc_intr,
@@ -584,15 +507,15 @@
else
xferfunc = hwif->atapi_input_bytes;
- if (pc->buffer)
- xferfunc(drive, pc->current_position, bcount);
+ if (pc->buf)
+ xferfunc(drive, pc->cur_pos, bcount);
else
ide_floppy_io_buffers(drive, pc, bcount,
!!(pc->flags & PC_FLAG_WRITING));
/* Update the current position */
- pc->actually_transferred += bcount;
- pc->current_position += bcount;
+ pc->xferred += bcount;
+ pc->cur_pos += bcount;
/* And set the interrupt handler again */
ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL);
@@ -606,6 +529,7 @@
*/
static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
ide_startstop_t startstop;
idefloppy_floppy_t *floppy = drive->driver_data;
u8 ireason;
@@ -615,7 +539,7 @@
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason = drive->hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);
if ((ireason & CD) == 0 || (ireason & IO)) {
printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while "
"issuing a packet command\n");
@@ -652,6 +576,7 @@
static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
idefloppy_floppy_t *floppy = drive->driver_data;
ide_startstop_t startstop;
u8 ireason;
@@ -661,7 +586,7 @@
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason = drive->hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);
if ((ireason & CD) == 0 || (ireason & IO)) {
printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) "
"while issuing a packet command\n");
@@ -682,7 +607,7 @@
}
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
- idefloppy_pc_t *pc)
+ struct ide_atapi_pc *pc)
{
/* supress error messages resulting from Medium not present */
if (floppy->sense_key == 0x02 &&
@@ -698,7 +623,7 @@
}
static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
- idefloppy_pc_t *pc)
+ struct ide_atapi_pc *pc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
@@ -719,7 +644,7 @@
pc->error = IDEFLOPPY_ERROR_GENERAL;
floppy->failed_pc = NULL;
- pc->callback(drive);
+ pc->idefloppy_callback(drive);
return ide_stopped;
}
@@ -727,9 +652,9 @@
pc->retries++;
/* We haven't transferred any data yet */
- pc->actually_transferred = 0;
- pc->current_position = pc->buffer;
- bcount = min(pc->request_transfer, 63 * 1024);
+ pc->xferred = 0;
+ pc->cur_pos = pc->buf;
+ bcount = min(pc->req_xfer, 63 * 1024);
if (pc->flags & PC_FLAG_DMA_ERROR) {
pc->flags &= ~PC_FLAG_DMA_ERROR;
@@ -757,7 +682,7 @@
/* immediate */
pkt_xfer_routine = &idefloppy_transfer_pc;
}
-
+
if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) {
/* Issue the packet command */
ide_execute_command(drive, WIN_PACKETCMD,
@@ -767,7 +692,7 @@
return ide_started;
} else {
/* Issue the packet command */
- HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG);
+ hwif->OUTB(WIN_PACKETCMD, hwif->io_ports[IDE_COMMAND_OFFSET]);
return (*pkt_xfer_routine) (drive);
}
}
@@ -776,11 +701,11 @@
{
debug_log("Reached %s\n", __func__);
- idefloppy_do_end_request(drive, 1, 0);
+ idefloppy_end_request(drive, 1, 0);
return;
}
-static void idefloppy_create_prevent_cmd(idefloppy_pc_t *pc, int prevent)
+static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent)
{
debug_log("creating prevent removal command, prevent = %d\n", prevent);
@@ -789,39 +714,39 @@
pc->c[4] = prevent;
}
-static void idefloppy_create_read_capacity_cmd(idefloppy_pc_t *pc)
+static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
pc->c[7] = 255;
pc->c[8] = 255;
- pc->request_transfer = 255;
+ pc->req_xfer = 255;
}
-static void idefloppy_create_format_unit_cmd(idefloppy_pc_t *pc, int b, int l,
- int flags)
+static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
+ int l, int flags)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_FORMAT_UNIT;
pc->c[1] = 0x17;
- memset(pc->buffer, 0, 12);
- pc->buffer[1] = 0xA2;
+ memset(pc->buf, 0, 12);
+ pc->buf[1] = 0xA2;
/* Default format list header, u8 1: FOV/DCRT/IMM bits set */
if (flags & 1) /* Verify bit on... */
- pc->buffer[1] ^= 0x20; /* ... turn off DCRT bit */
- pc->buffer[3] = 8;
+ pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */
+ pc->buf[3] = 8;
- put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4]));
- put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8]));
- pc->buffer_size = 12;
+ put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
+ put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
+ pc->buf_size = 12;
pc->flags |= PC_FLAG_WRITING;
}
/* A mode sense command is used to "sense" floppy parameters. */
-static void idefloppy_create_mode_sense_cmd(idefloppy_pc_t *pc, u8 page_code,
- u8 type)
+static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc,
+ u8 page_code, u8 type)
{
u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
@@ -842,24 +767,24 @@
"in create_mode_sense_cmd\n");
}
put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
- pc->request_transfer = length;
+ pc->req_xfer = length;
}
-static void idefloppy_create_start_stop_cmd(idefloppy_pc_t *pc, int start)
+static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_START_STOP_UNIT;
pc->c[4] = start;
}
-static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc)
+static void idefloppy_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
{
idefloppy_init_pc(pc);
pc->c[0] = GPCMD_TEST_UNIT_READY;
}
static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
- idefloppy_pc_t *pc, struct request *rq,
+ struct ide_atapi_pc *pc, struct request *rq,
unsigned long sector)
{
int block = sector / floppy->bs_factor;
@@ -874,41 +799,41 @@
put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
- pc->callback = &idefloppy_rw_callback;
+ pc->idefloppy_callback = &idefloppy_rw_callback;
pc->rq = rq;
pc->b_count = cmd == READ ? 0 : rq->bio->bi_size;
if (rq->cmd_flags & REQ_RW)
pc->flags |= PC_FLAG_WRITING;
- pc->buffer = NULL;
- pc->request_transfer = pc->buffer_size = blocks * floppy->block_size;
+ pc->buf = NULL;
+ pc->req_xfer = pc->buf_size = blocks * floppy->block_size;
pc->flags |= PC_FLAG_DMA_RECOMMENDED;
}
static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy,
- idefloppy_pc_t *pc, struct request *rq)
+ struct ide_atapi_pc *pc, struct request *rq)
{
idefloppy_init_pc(pc);
- pc->callback = &idefloppy_rw_callback;
+ pc->idefloppy_callback = &idefloppy_rw_callback;
memcpy(pc->c, rq->cmd, sizeof(pc->c));
pc->rq = rq;
pc->b_count = rq->data_len;
if (rq->data_len && rq_data_dir(rq) == WRITE)
pc->flags |= PC_FLAG_WRITING;
- pc->buffer = rq->data;
+ pc->buf = rq->data;
if (rq->bio)
pc->flags |= PC_FLAG_DMA_RECOMMENDED;
/*
* possibly problematic, doesn't look like ide-floppy correctly
* handled scattered requests if dma fails...
*/
- pc->request_transfer = pc->buffer_size = rq->data_len;
+ pc->req_xfer = pc->buf_size = rq->data_len;
}
static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
struct request *rq, sector_t block_s)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_pc_t *pc;
+ struct ide_atapi_pc *pc;
unsigned long block = (unsigned long)block_s;
debug_log("dev: %s, cmd_type: %x, errors: %d\n",
@@ -924,7 +849,7 @@
else
printk(KERN_ERR "ide-floppy: %s: I/O error\n",
drive->name);
- idefloppy_do_end_request(drive, 0, 0);
+ idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
if (blk_fs_request(rq)) {
@@ -932,20 +857,20 @@
(rq->nr_sectors % floppy->bs_factor)) {
printk(KERN_ERR "%s: unsupported r/w request size\n",
drive->name);
- idefloppy_do_end_request(drive, 0, 0);
+ idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
pc = idefloppy_next_pc_storage(drive);
idefloppy_create_rw_cmd(floppy, pc, rq, block);
} else if (blk_special_request(rq)) {
- pc = (idefloppy_pc_t *) rq->buffer;
+ pc = (struct ide_atapi_pc *) rq->buffer;
} else if (blk_pc_request(rq)) {
pc = idefloppy_next_pc_storage(drive);
idefloppy_blockpc_cmd(floppy, pc, rq);
} else {
blk_dump_rq_flags(rq,
"ide-floppy: unsupported command in queue");
- idefloppy_do_end_request(drive, 0, 0);
+ idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
@@ -957,7 +882,7 @@
* Add a special packet command request to the tail of the request queue,
* and wait for it to be serviced.
*/
-static int idefloppy_queue_pc_tail(ide_drive_t *drive, idefloppy_pc_t *pc)
+static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct ide_floppy_obj *floppy = drive->driver_data;
struct request rq;
@@ -977,7 +902,7 @@
static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
u8 *page;
int capacity, lba_capacity;
u16 transfer_rate, sector_size, cyls, rpm;
@@ -991,16 +916,16 @@
" parameters\n");
return 1;
}
- floppy->wp = !!(pc.buffer[3] & 0x80);
+ floppy->wp = !!(pc.buf[3] & 0x80);
set_disk_ro(floppy->disk, floppy->wp);
- page = &pc.buffer[8];
+ page = &pc.buf[8];
- transfer_rate = be16_to_cpu(*(u16 *)&pc.buffer[8 + 2]);
- sector_size = be16_to_cpu(*(u16 *)&pc.buffer[8 + 6]);
- cyls = be16_to_cpu(*(u16 *)&pc.buffer[8 + 8]);
- rpm = be16_to_cpu(*(u16 *)&pc.buffer[8 + 28]);
- heads = pc.buffer[8 + 4];
- sectors = pc.buffer[8 + 5];
+ transfer_rate = be16_to_cpu(*(u16 *)&pc.buf[8 + 2]);
+ sector_size = be16_to_cpu(*(u16 *)&pc.buf[8 + 6]);
+ cyls = be16_to_cpu(*(u16 *)&pc.buf[8 + 8]);
+ rpm = be16_to_cpu(*(u16 *)&pc.buf[8 + 28]);
+ heads = pc.buf[8 + 4];
+ sectors = pc.buf[8 + 5];
capacity = cyls * heads * sectors * sector_size;
@@ -1029,7 +954,7 @@
static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
floppy->srfp = 0;
idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE,
@@ -1039,7 +964,7 @@
if (idefloppy_queue_pc_tail(drive, &pc))
return 1;
- floppy->srfp = pc.buffer[8 + 2] & 0x40;
+ floppy->srfp = pc.buf[8 + 2] & 0x40;
return (0);
}
@@ -1050,7 +975,7 @@
static int ide_floppy_get_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
u8 *cap_desc;
u8 header_len, desc_cnt;
int i, rc = 1, blocks, length;
@@ -1066,15 +991,15 @@
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return 1;
}
- header_len = pc.buffer[3];
- cap_desc = &pc.buffer[4];
+ header_len = pc.buf[3];
+ cap_desc = &pc.buf[4];
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
for (i = 0; i < desc_cnt; i++) {
unsigned int desc_start = 4 + i*8;
- blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]);
- length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]);
+ blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]);
+ length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]);
debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
i, blocks * length / 1024, blocks, length);
@@ -1085,7 +1010,7 @@
* the code below is valid only for the 1st descriptor, ie i=0
*/
- switch (pc.buffer[desc_start + 4] & 0x03) {
+ switch (pc.buf[desc_start + 4] & 0x03) {
/* Clik! drive returns this instead of CAPACITY_CURRENT */
case CAPACITY_UNFORMATTED:
if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE))
@@ -1130,7 +1055,7 @@
break;
}
debug_log("Descriptor 0 Code: %d\n",
- pc.buffer[desc_start + 4] & 0x03);
+ pc.buf[desc_start + 4] & 0x03);
}
/* Clik! disk does not support get_flexible_disk_page */
@@ -1162,7 +1087,7 @@
static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
{
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
u8 header_len, desc_cnt;
int i, blocks, length, u_array_size, u_index;
int __user *argp;
@@ -1178,7 +1103,7 @@
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return (-EIO);
}
- header_len = pc.buffer[3];
+ header_len = pc.buf[3];
desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
u_index = 0;
@@ -1195,8 +1120,8 @@
if (u_index >= u_array_size)
break; /* User-supplied buffer too small */
- blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]);
- length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]);
+ blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]);
+ length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]);
if (put_user(blocks, argp))
return(-EFAULT);
@@ -1227,7 +1152,7 @@
static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
int progress_indication = 0x10000;
if (floppy->srfp) {
@@ -1271,33 +1196,39 @@
*/
static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id)
{
- struct idefloppy_id_gcw gcw;
+ u8 gcw[2];
+ u8 device_type, protocol, removable, drq_type, packet_size;
*((u16 *) &gcw) = id->config;
+ device_type = gcw[1] & 0x1F;
+ removable = (gcw[0] & 0x80) >> 7;
+ protocol = (gcw[1] & 0xC0) >> 6;
+ drq_type = (gcw[0] & 0x60) >> 5;
+ packet_size = gcw[0] & 0x03;
+
#ifdef CONFIG_PPC
/* kludge for Apple PowerBook internal zip */
- if ((gcw.device_type == 5) &&
- !strstr(id->model, "CD-ROM") &&
- strstr(id->model, "ZIP"))
- gcw.device_type = 0;
+ if (device_type == 5 &&
+ !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP"))
+ device_type = 0;
#endif
- if (gcw.protocol != 2)
+ if (protocol != 2)
printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n",
- gcw.protocol);
- else if (gcw.device_type != 0)
+ protocol);
+ else if (device_type != 0)
printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set "
- "to floppy\n", gcw.device_type);
- else if (!gcw.removable)
+ "to floppy\n", device_type);
+ else if (!removable)
printk(KERN_ERR "ide-floppy: The removable flag is not set\n");
- else if (gcw.drq_type == 3) {
+ else if (drq_type == 3)
printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not "
- "supported\n", gcw.drq_type);
- } else if (gcw.packet_size != 0) {
+ "supported\n", drq_type);
+ else if (packet_size != 0)
printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 "
- "bytes long\n", gcw.packet_size);
- } else
+ "bytes\n", packet_size);
+ else
return 1;
return 0;
}
@@ -1322,11 +1253,12 @@
static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
{
- struct idefloppy_id_gcw gcw;
+ u8 gcw[2];
*((u16 *) &gcw) = drive->id->config;
floppy->pc = floppy->pc_stack;
- if (gcw.drq_type == 1)
+
+ if (((gcw[0] & 0x60) >> 5) == 1)
floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT;
/*
* We used to check revisions here. At this point however I'm giving up.
@@ -1413,7 +1345,7 @@
.media = ide_floppy,
.supports_dsc_overlap = 0,
.do_request = idefloppy_do_request,
- .end_request = idefloppy_do_end_request,
+ .end_request = idefloppy_end_request,
.error = __ide_error,
.abort = __ide_abort,
#ifdef CONFIG_IDE_PROC_FS
@@ -1426,7 +1358,7 @@
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *floppy;
ide_drive_t *drive;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
int ret = 0;
debug_log("Reached %s\n", __func__);
@@ -1489,7 +1421,7 @@
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_floppy_obj *floppy = ide_floppy_g(disk);
ide_drive_t *drive = floppy->drive;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
debug_log("Reached %s\n", __func__);
@@ -1521,8 +1453,8 @@
return 0;
}
-static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc,
- unsigned long arg, unsigned int cmd)
+static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy,
+ struct ide_atapi_pc *pc, unsigned long arg, unsigned int cmd)
{
if (floppy->openers > 1)
return -EBUSY;
@@ -1551,7 +1483,7 @@
int __user *arg)
{
int blocks, length, flags, err = 0;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
if (floppy->openers > 1) {
/* Don't format if someone is using the disk */
@@ -1602,7 +1534,7 @@
struct block_device *bdev = inode->i_bdev;
struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
ide_drive_t *drive = floppy->drive;
- idefloppy_pc_t pc;
+ struct ide_atapi_pc pc;
void __user *argp = (void __user *)arg;
int err;
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 9ebec08..25fda0a 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -1,17 +1,89 @@
/*
* generic/default IDE host driver
*
- * Copyright (C) 2004 Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2004, 2008 Bartlomiej Zolnierkiewicz
* This code was split off from ide.c. See it for original copyrights.
*
* May be copied or modified under the terms of the GNU General Public License.
*/
+/*
+ * For special cases new interfaces may be added using sysfs, i.e.
+ *
+ * echo -n "0x168:0x36e:10" > /sys/class/ide_generic/add
+ *
+ * will add an interface using I/O ports 0x168-0x16f/0x36e and IRQ 10.
+ */
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/ide.h>
+#define DRV_NAME "ide_generic"
+
+static ssize_t store_add(struct class *cls, const char *buf, size_t n)
+{
+ ide_hwif_t *hwif;
+ unsigned int base, ctl;
+ int irq;
+ hw_regs_t hw;
+ u8 idx[] = { 0xff, 0xff, 0xff, 0xff };
+
+ if (sscanf(buf, "%x:%x:%d", &base, &ctl, &irq) != 3)
+ return -EINVAL;
+
+ hwif = ide_find_port(base);
+ if (hwif == NULL)
+ return -ENOENT;
+
+ memset(&hw, 0, sizeof(hw));
+ ide_std_init_ports(&hw, base, ctl);
+ hw.irq = irq;
+ hw.chipset = ide_generic;
+
+ ide_init_port_hw(hwif, &hw);
+
+ idx[0] = hwif->index;
+
+ ide_device_add(idx, NULL);
+
+ return n;
+};
+
+static struct class_attribute ide_generic_class_attrs[] = {
+ __ATTR(add, S_IWUSR, NULL, store_add),
+ __ATTR_NULL
+};
+
+static void ide_generic_class_release(struct class *cls)
+{
+ kfree(cls);
+}
+
+static int __init ide_generic_sysfs_init(void)
+{
+ struct class *cls;
+ int rc;
+
+ cls = kzalloc(sizeof(*cls), GFP_KERNEL);
+ if (!cls)
+ return -ENOMEM;
+
+ cls->name = DRV_NAME;
+ cls->owner = THIS_MODULE;
+ cls->class_release = ide_generic_class_release;
+ cls->class_attrs = ide_generic_class_attrs;
+
+ rc = class_register(cls);
+ if (rc) {
+ kfree(cls);
+ return rc;
+ }
+
+ return 0;
+}
+
static int __init ide_generic_init(void)
{
u8 idx[MAX_HWIFS];
@@ -19,15 +91,26 @@
for (i = 0; i < MAX_HWIFS; i++) {
ide_hwif_t *hwif = &ide_hwifs[i];
+ unsigned long io_addr = ide_default_io_base(i);
+ hw_regs_t hw;
- if (hwif->io_ports[IDE_DATA_OFFSET] && !hwif->present)
+ if (hwif->chipset == ide_unknown && io_addr) {
+ memset(&hw, 0, sizeof(hw));
+ ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
+ hw.irq = ide_default_irq(io_addr);
+ ide_init_port_hw(hwif, &hw);
+
idx[i] = i;
- else
+ } else
idx[i] = 0xff;
}
ide_device_add_all(idx, NULL);
+ if (ide_generic_sysfs_init())
+ printk(KERN_ERR DRV_NAME ": failed to create ide_generic "
+ "class\n");
+
return 0;
}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 7153796..31e5afa 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -301,39 +301,45 @@
struct ide_taskfile *tf = &task->tf;
if (task->tf_flags & IDE_TFLAG_IN_DATA) {
- u16 data = hwif->INW(IDE_DATA_REG);
+ u16 data = hwif->INW(hwif->io_ports[IDE_DATA_OFFSET]);
tf->data = data & 0xff;
tf->hob_data = (data >> 8) & 0xff;
}
/* be sure we're looking at the low order bits */
- hwif->OUTB(drive->ctl & ~0x80, IDE_CONTROL_REG);
+ hwif->OUTB(drive->ctl & ~0x80, hwif->io_ports[IDE_CONTROL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_NSECT)
- tf->nsect = hwif->INB(IDE_NSECTOR_REG);
+ tf->nsect = hwif->INB(hwif->io_ports[IDE_NSECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_LBAL)
- tf->lbal = hwif->INB(IDE_SECTOR_REG);
+ tf->lbal = hwif->INB(hwif->io_ports[IDE_SECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_LBAM)
- tf->lbam = hwif->INB(IDE_LCYL_REG);
+ tf->lbam = hwif->INB(hwif->io_ports[IDE_LCYL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_LBAH)
- tf->lbah = hwif->INB(IDE_HCYL_REG);
+ tf->lbah = hwif->INB(hwif->io_ports[IDE_HCYL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
- tf->device = hwif->INB(IDE_SELECT_REG);
+ tf->device = hwif->INB(hwif->io_ports[IDE_SELECT_OFFSET]);
if (task->tf_flags & IDE_TFLAG_LBA48) {
- hwif->OUTB(drive->ctl | 0x80, IDE_CONTROL_REG);
+ hwif->OUTB(drive->ctl | 0x80,
+ hwif->io_ports[IDE_CONTROL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
- tf->hob_feature = hwif->INB(IDE_FEATURE_REG);
+ tf->hob_feature =
+ hwif->INB(hwif->io_ports[IDE_FEATURE_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = hwif->INB(IDE_NSECTOR_REG);
+ tf->hob_nsect =
+ hwif->INB(hwif->io_ports[IDE_NSECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = hwif->INB(IDE_SECTOR_REG);
+ tf->hob_lbal =
+ hwif->INB(hwif->io_ports[IDE_SECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = hwif->INB(IDE_LCYL_REG);
+ tf->hob_lbam =
+ hwif->INB(hwif->io_ports[IDE_LCYL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = hwif->INB(IDE_HCYL_REG);
+ tf->hob_lbah =
+ hwif->INB(hwif->io_ports[IDE_HCYL_OFFSET]);
}
}
@@ -448,7 +454,8 @@
if (err == ABRT_ERR) {
if (drive->select.b.lba &&
/* some newer drives don't support WIN_SPECIFY */
- hwif->INB(IDE_COMMAND_REG) == WIN_SPECIFY)
+ hwif->INB(hwif->io_ports[IDE_COMMAND_OFFSET]) ==
+ WIN_SPECIFY)
return ide_stopped;
} else if ((err & BAD_CRC) == BAD_CRC) {
/* UDMA crc error, just retry the operation */
@@ -500,7 +507,8 @@
if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTB(WIN_IDLEIMMEDIATE, IDE_COMMAND_REG);
+ hwif->OUTB(WIN_IDLEIMMEDIATE,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
if (rq->errors >= ERROR_MAX) {
ide_kill_rq(drive, rq);
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 01b9220..4594421 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -158,9 +158,12 @@
void SELECT_DRIVE (ide_drive_t *drive)
{
- if (HWIF(drive)->selectproc)
- HWIF(drive)->selectproc(drive);
- HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG);
+ ide_hwif_t *hwif = drive->hwif;
+
+ if (hwif->selectproc)
+ hwif->selectproc(drive);
+
+ hwif->OUTB(drive->select.all, hwif->io_ports[IDE_SELECT_OFFSET]);
}
void SELECT_MASK (ide_drive_t *drive, int mask)
@@ -194,15 +197,18 @@
if (io_32bit) {
if (io_32bit & 2) {
unsigned long flags;
+
local_irq_save(flags);
- ata_vlb_sync(drive, IDE_NSECTOR_REG);
- hwif->INSL(IDE_DATA_REG, buffer, wcount);
+ ata_vlb_sync(drive, hwif->io_ports[IDE_NSECTOR_OFFSET]);
+ hwif->INSL(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount);
local_irq_restore(flags);
} else
- hwif->INSL(IDE_DATA_REG, buffer, wcount);
- } else {
- hwif->INSW(IDE_DATA_REG, buffer, wcount<<1);
- }
+ hwif->INSL(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount);
+ } else
+ hwif->INSW(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount << 1);
}
/*
@@ -216,15 +222,18 @@
if (io_32bit) {
if (io_32bit & 2) {
unsigned long flags;
+
local_irq_save(flags);
- ata_vlb_sync(drive, IDE_NSECTOR_REG);
- hwif->OUTSL(IDE_DATA_REG, buffer, wcount);
+ ata_vlb_sync(drive, hwif->io_ports[IDE_NSECTOR_OFFSET]);
+ hwif->OUTSL(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount);
local_irq_restore(flags);
} else
- hwif->OUTSL(IDE_DATA_REG, buffer, wcount);
- } else {
- hwif->OUTSW(IDE_DATA_REG, buffer, wcount<<1);
- }
+ hwif->OUTSL(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount);
+ } else
+ hwif->OUTSW(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ wcount << 1);
}
/*
@@ -243,13 +252,15 @@
#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
if (MACH_IS_ATARI || MACH_IS_Q40) {
/* Atari has a byte-swapped IDE interface */
- insw_swapw(IDE_DATA_REG, buffer, bytecount / 2);
+ insw_swapw(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ bytecount / 2);
return;
}
#endif /* CONFIG_ATARI || CONFIG_Q40 */
hwif->ata_input_data(drive, buffer, bytecount / 4);
if ((bytecount & 0x03) >= 2)
- hwif->INSW(IDE_DATA_REG, ((u8 *)buffer)+(bytecount & ~0x03), 1);
+ hwif->INSW(hwif->io_ports[IDE_DATA_OFFSET],
+ (u8 *)buffer + (bytecount & ~0x03), 1);
}
static void atapi_output_bytes(ide_drive_t *drive, void *buffer, u32 bytecount)
@@ -260,13 +271,15 @@
#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
if (MACH_IS_ATARI || MACH_IS_Q40) {
/* Atari has a byte-swapped IDE interface */
- outsw_swapw(IDE_DATA_REG, buffer, bytecount / 2);
+ outsw_swapw(hwif->io_ports[IDE_DATA_OFFSET], buffer,
+ bytecount / 2);
return;
}
#endif /* CONFIG_ATARI || CONFIG_Q40 */
hwif->ata_output_data(drive, buffer, bytecount / 4);
if ((bytecount & 0x03) >= 2)
- hwif->OUTSW(IDE_DATA_REG, ((u8*)buffer)+(bytecount & ~0x03), 1);
+ hwif->OUTSW(hwif->io_ports[IDE_DATA_OFFSET],
+ (u8 *)buffer + (bytecount & ~0x03), 1);
}
void default_hwif_transport(ide_hwif_t *hwif)
@@ -429,7 +442,7 @@
* an interrupt with another pci card/device. We make no assumptions
* about possible isa-pnp and pci-pnp issues yet.
*/
- if (IDE_CONTROL_REG)
+ if (hwif->io_ports[IDE_CONTROL_OFFSET])
stat = ide_read_altstatus(drive);
else
/* Note: this may clear a pending IRQ!! */
@@ -631,7 +644,7 @@
SELECT_MASK(drive, 1);
ide_set_irq(drive, 1);
msleep(50);
- hwif->OUTB(WIN_IDENTIFY, IDE_COMMAND_REG);
+ hwif->OUTB(WIN_IDENTIFY, hwif->io_ports[IDE_COMMAND_OFFSET]);
timeout = jiffies + WAIT_WORSTCASE;
do {
if (time_after(jiffies, timeout)) {
@@ -658,7 +671,7 @@
local_irq_restore(flags);
return 0;
}
- ata_input_data(drive, id, SECTOR_WORDS);
+ hwif->ata_input_data(drive, id, SECTOR_WORDS);
(void)ide_read_status(drive); /* clear drive IRQ */
local_irq_enable();
local_irq_restore(flags);
@@ -718,9 +731,10 @@
SELECT_MASK(drive, 0);
udelay(1);
ide_set_irq(drive, 0);
- hwif->OUTB(speed, IDE_NSECTOR_REG);
- hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
- hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
+ hwif->OUTB(speed, hwif->io_ports[IDE_NSECTOR_OFFSET]);
+ hwif->OUTB(SETFEATURES_XFER, hwif->io_ports[IDE_FEATURE_OFFSET]);
+ hwif->OUTBSYNC(drive, WIN_SETFEATURES,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
if (drive->quirk_list == 2)
ide_set_irq(drive, 1);
@@ -828,7 +842,7 @@
spin_lock_irqsave(&ide_lock, flags);
__ide_set_handler(drive, handler, timeout, expiry);
- hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG);
+ hwif->OUTBSYNC(drive, cmd, hwif->io_ports[IDE_COMMAND_OFFSET]);
/*
* Drive takes 400nS to respond, we must avoid the IRQ being
* serviced before that.
@@ -1009,7 +1023,8 @@
unsigned long flags;
ide_hwif_t *hwif;
ide_hwgroup_t *hwgroup;
-
+ u8 ctl;
+
spin_lock_irqsave(&ide_lock, flags);
hwif = HWIF(drive);
hwgroup = HWGROUP(drive);
@@ -1023,7 +1038,8 @@
pre_reset(drive);
SELECT_DRIVE(drive);
udelay (20);
- hwif->OUTBSYNC(drive, WIN_SRST, IDE_COMMAND_REG);
+ hwif->OUTBSYNC(drive, WIN_SRST,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
ndelay(400);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
hwgroup->polling = 1;
@@ -1039,7 +1055,7 @@
for (unit = 0; unit < MAX_DRIVES; ++unit)
pre_reset(&hwif->drives[unit]);
- if (!IDE_CONTROL_REG) {
+ if (hwif->io_ports[IDE_CONTROL_OFFSET] == 0) {
spin_unlock_irqrestore(&ide_lock, flags);
return ide_stopped;
}
@@ -1054,16 +1070,14 @@
* recover from reset very quickly, saving us the first 50ms wait time.
*/
/* set SRST and nIEN */
- hwif->OUTBSYNC(drive, drive->ctl|6,IDE_CONTROL_REG);
+ hwif->OUTBSYNC(drive, drive->ctl|6, hwif->io_ports[IDE_CONTROL_OFFSET]);
/* more than enough time */
udelay(10);
- if (drive->quirk_list == 2) {
- /* clear SRST and nIEN */
- hwif->OUTBSYNC(drive, drive->ctl, IDE_CONTROL_REG);
- } else {
- /* clear SRST, leave nIEN */
- hwif->OUTBSYNC(drive, drive->ctl|2, IDE_CONTROL_REG);
- }
+ if (drive->quirk_list == 2)
+ ctl = drive->ctl; /* clear SRST and nIEN */
+ else
+ ctl = drive->ctl | 2; /* clear SRST, leave nIEN */
+ hwif->OUTBSYNC(drive, ctl, hwif->io_ports[IDE_CONTROL_OFFSET]);
/* more than enough time */
udelay(10);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index b163b2e..34c2ad3 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -62,7 +62,7 @@
ide_hwif_t *hwif = pnp_get_drvdata(dev);
if (hwif)
- ide_unregister(hwif->index, 0, 0);
+ ide_unregister(hwif->index);
else
printk(KERN_ERR "idepnp: Unable to remove device, please report.\n");
}
@@ -86,3 +86,5 @@
module_init(pnpide_init);
module_exit(pnpide_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 47a1149..6a196c2 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -271,7 +271,7 @@
/* take a deep breath */
msleep(50);
- if (IDE_CONTROL_REG) {
+ if (hwif->io_ports[IDE_CONTROL_OFFSET]) {
a = ide_read_altstatus(drive);
s = ide_read_status(drive);
if ((a ^ s) & ~INDEX_STAT)
@@ -289,10 +289,10 @@
*/
if ((cmd == WIN_PIDENTIFY))
/* disable dma & overlap */
- hwif->OUTB(0, IDE_FEATURE_REG);
+ hwif->OUTB(0, hwif->io_ports[IDE_FEATURE_OFFSET]);
/* ask drive for ID */
- hwif->OUTB(cmd, IDE_COMMAND_REG);
+ hwif->OUTB(cmd, hwif->io_ports[IDE_COMMAND_OFFSET]);
timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
timeout += jiffies;
@@ -353,7 +353,7 @@
* interrupts during the identify-phase that
* the irq handler isn't expecting.
*/
- if (IDE_CONTROL_REG) {
+ if (hwif->io_ports[IDE_CONTROL_OFFSET]) {
if (!hwif->irq) {
autoprobe = 1;
cookie = probe_irq_on();
@@ -445,7 +445,8 @@
msleep(50);
SELECT_DRIVE(drive);
msleep(50);
- if (hwif->INB(IDE_SELECT_REG) != drive->select.all && !drive->present) {
+ if (hwif->INB(hwif->io_ports[IDE_SELECT_OFFSET]) != drive->select.all &&
+ !drive->present) {
if (drive->select.b.unit != 0) {
/* exit with drive0 selected */
SELECT_DRIVE(&hwif->drives[0]);
@@ -477,9 +478,11 @@
printk(KERN_ERR "%s: no response (status = 0x%02x), "
"resetting drive\n", drive->name, stat);
msleep(50);
- hwif->OUTB(drive->select.all, IDE_SELECT_REG);
+ hwif->OUTB(drive->select.all,
+ hwif->io_ports[IDE_SELECT_OFFSET]);
msleep(50);
- hwif->OUTB(WIN_SRST, IDE_COMMAND_REG);
+ hwif->OUTB(WIN_SRST,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
@@ -515,7 +518,7 @@
printk("%s: enabling %s -- ", hwif->name, drive->id->model);
SELECT_DRIVE(drive);
msleep(50);
- hwif->OUTB(EXABYTE_ENABLE_NEST, IDE_COMMAND_REG);
+ hwif->OUTB(EXABYTE_ENABLE_NEST, hwif->io_ports[IDE_COMMAND_OFFSET]);
if (ide_busy_sleep(hwif)) {
printk(KERN_CONT "failed (timeout)\n");
@@ -623,7 +626,7 @@
complete(&hwif->gendev_rel_comp);
}
-static void ide_register_port(ide_hwif_t *hwif)
+static int ide_register_port(ide_hwif_t *hwif)
{
int ret;
@@ -639,9 +642,23 @@
}
hwif->gendev.release = hwif_release_dev;
ret = device_register(&hwif->gendev);
- if (ret < 0)
+ if (ret < 0) {
printk(KERN_WARNING "IDE: %s: device_register error: %d\n",
__FUNCTION__, ret);
+ goto out;
+ }
+
+ get_device(&hwif->gendev);
+
+ hwif->portdev = device_create(ide_port_class, &hwif->gendev,
+ MKDEV(0, 0), hwif->name);
+ if (IS_ERR(hwif->portdev)) {
+ ret = PTR_ERR(hwif->portdev);
+ device_unregister(&hwif->gendev);
+ }
+ dev_set_drvdata(hwif->portdev, hwif);
+out:
+ return ret;
}
/**
@@ -949,6 +966,7 @@
{
int i;
+ mutex_lock(&ide_cfg_mtx);
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];
@@ -963,6 +981,7 @@
ide_add_drive_to_hwgroup(drive);
}
+ mutex_unlock(&ide_cfg_mtx);
}
/*
@@ -1088,8 +1107,6 @@
hwif->sharing_irq ? "shar" : "serializ", match->name);
printk("\n");
- ide_port_setup_devices(hwif);
-
mutex_unlock(&ide_cfg_mtx);
return 0;
out_unlink:
@@ -1199,6 +1216,8 @@
{
ide_drive_t *drive = container_of(dev, ide_drive_t, gendev);
+ ide_proc_unregister_device(drive);
+
spin_lock_irq(&ide_lock);
ide_remove_drive_from_hwgroup(drive);
kfree(drive->id);
@@ -1214,6 +1233,10 @@
complete(&drive->gendev_rel_comp);
}
+#ifndef ide_default_irq
+#define ide_default_irq(irq) 0
+#endif
+
static int hwif_init(ide_hwif_t *hwif)
{
int old_irq;
@@ -1225,13 +1248,6 @@
return 0;
}
}
-#ifdef CONFIG_BLK_DEV_HD
- if (hwif->irq == HD_IRQ && hwif->io_ports[IDE_DATA_OFFSET] != HD_DATA) {
- printk("%s: CANNOT SHARE IRQ WITH OLD "
- "HARDDISK DRIVER (hd.c)\n", hwif->name);
- return 0;
- }
-#endif /* CONFIG_BLK_DEV_HD */
if (register_blkdev(hwif->major, hwif->name))
return 0;
@@ -1366,13 +1382,68 @@
/* call chipset specific routine for each enabled port */
if (d->init_hwif)
d->init_hwif(hwif);
+}
+static void ide_port_cable_detect(ide_hwif_t *hwif)
+{
if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) {
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = hwif->cable_detect(hwif);
}
}
+static ssize_t store_delete_devices(struct device *portdev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ ide_hwif_t *hwif = dev_get_drvdata(portdev);
+
+ if (strncmp(buf, "1", n))
+ return -EINVAL;
+
+ ide_port_unregister_devices(hwif);
+
+ return n;
+};
+
+static DEVICE_ATTR(delete_devices, S_IWUSR, NULL, store_delete_devices);
+
+static ssize_t store_scan(struct device *portdev,
+ struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ ide_hwif_t *hwif = dev_get_drvdata(portdev);
+
+ if (strncmp(buf, "1", n))
+ return -EINVAL;
+
+ ide_port_unregister_devices(hwif);
+ ide_port_scan(hwif);
+
+ return n;
+};
+
+static DEVICE_ATTR(scan, S_IWUSR, NULL, store_scan);
+
+static struct device_attribute *ide_port_attrs[] = {
+ &dev_attr_delete_devices,
+ &dev_attr_scan,
+ NULL
+};
+
+static int ide_sysfs_register_port(ide_hwif_t *hwif)
+{
+ int i, rc;
+
+ for (i = 0; ide_port_attrs[i]; i++) {
+ rc = device_create_file(hwif->portdev, ide_port_attrs[i]);
+ if (rc)
+ break;
+ }
+
+ return rc;
+}
+
int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
{
ide_hwif_t *hwif, *mate = NULL;
@@ -1394,6 +1465,7 @@
mate = (i & 1) ? NULL : hwif;
ide_init_port(hwif, i & 1, d);
+ ide_port_cable_detect(hwif);
ide_port_init_devices(hwif);
}
@@ -1441,6 +1513,8 @@
continue;
}
+ ide_port_setup_devices(hwif);
+
ide_acpi_init(hwif);
ide_acpi_port_init_devices(hwif);
}
@@ -1452,8 +1526,7 @@
hwif = &ide_hwifs[idx[i]];
if (hwif->present) {
- if (hwif->chipset == ide_unknown ||
- hwif->chipset == ide_forced)
+ if (hwif->chipset == ide_unknown)
hwif->chipset = ide_generic;
hwif_register_devices(hwif);
}
@@ -1466,6 +1539,7 @@
hwif = &ide_hwifs[idx[i]];
if (hwif->present) {
+ ide_sysfs_register_port(hwif);
ide_proc_register_port(hwif);
ide_proc_port_register_devices(hwif);
}
@@ -1486,3 +1560,21 @@
return ide_device_add_all(idx_all, d);
}
EXPORT_SYMBOL_GPL(ide_device_add);
+
+void ide_port_scan(ide_hwif_t *hwif)
+{
+ ide_port_cable_detect(hwif);
+ ide_port_init_devices(hwif);
+
+ if (ide_probe_port(hwif) < 0)
+ return;
+
+ hwif->present = 1;
+
+ ide_port_tune_devices(hwif);
+ ide_acpi_port_init_devices(hwif);
+ ide_port_setup_devices(hwif);
+ hwif_register_devices(hwif);
+ ide_proc_port_register_devices(hwif);
+}
+EXPORT_SYMBOL_GPL(ide_port_scan);
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index bab88ca..edd7f18 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -46,9 +46,6 @@
int len;
const char *name;
- /*
- * Neither ide_unknown nor ide_forced should be set at this point.
- */
switch (hwif->chipset) {
case ide_generic: name = "generic"; break;
case ide_pci: name = "pci"; break;
@@ -764,27 +761,16 @@
}
}
-static void destroy_proc_ide_device(ide_hwif_t *hwif, ide_drive_t *drive)
+void ide_proc_unregister_device(ide_drive_t *drive)
{
if (drive->proc) {
ide_remove_proc_entries(drive->proc, generic_drive_entries);
remove_proc_entry(drive->name, proc_ide_root);
- remove_proc_entry(drive->name, hwif->proc);
+ remove_proc_entry(drive->name, drive->hwif->proc);
drive->proc = NULL;
}
}
-static void destroy_proc_ide_drives(ide_hwif_t *hwif)
-{
- int d;
-
- for (d = 0; d < MAX_DRIVES; d++) {
- ide_drive_t *drive = &hwif->drives[d];
- if (drive->proc)
- destroy_proc_ide_device(hwif, drive);
- }
-}
-
static ide_proc_entry_t hwif_entries[] = {
{ "channel", S_IFREG|S_IRUGO, proc_ide_read_channel, NULL },
{ "mate", S_IFREG|S_IRUGO, proc_ide_read_mate, NULL },
@@ -816,7 +802,6 @@
void ide_proc_unregister_port(ide_hwif_t *hwif)
{
if (hwif->proc) {
- destroy_proc_ide_drives(hwif);
ide_remove_proc_entries(hwif->proc, hwif_entries);
remove_proc_entry(hwif->name, proc_ide_root);
hwif->proc = NULL;
diff --git a/drivers/ide/ide-scan-pci.c b/drivers/ide/ide-scan-pci.c
index 93d2e41..98888da 100644
--- a/drivers/ide/ide-scan-pci.c
+++ b/drivers/ide/ide-scan-pci.c
@@ -88,13 +88,8 @@
struct list_head *l, *n;
pre_init = 0;
- if (!ide_scan_direction)
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
- ide_scan_pcidev(dev);
- else
- while ((dev = pci_get_device_reverse(PCI_ANY_ID, PCI_ANY_ID,
- dev)))
- ide_scan_pcidev(dev);
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)))
+ ide_scan_pcidev(dev);
/*
* Hand the drivers over to the PCI layer now we
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 0598ecf..f43fd07 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -181,49 +181,63 @@
char *b_data;
};
-typedef struct idetape_packet_command_s {
- /* Actual packet bytes */
- u8 c[12];
- /* On each retry, we increment retries */
- int retries;
- /* Error code */
- int error;
- /* Bytes to transfer */
- int request_transfer;
- /* Bytes actually transferred */
- int actually_transferred;
- /* Size of our data buffer */
- int buffer_size;
- struct idetape_bh *bh;
- char *b_data;
- int b_count;
- /* Data buffer */
- u8 *buffer;
- /* Pointer into the above buffer */
- u8 *current_position;
- /* Called when this packet command is completed */
- ide_startstop_t (*callback) (ide_drive_t *);
- /* Temporary buffer */
- u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE];
- /* Status/Action bit flags: long for set_bit */
- unsigned long flags;
-} idetape_pc_t;
+/* Tape door status */
+#define DOOR_UNLOCKED 0
+#define DOOR_LOCKED 1
+#define DOOR_EXPLICITLY_LOCKED 2
+
+/* Some defines for the SPACE command */
+#define IDETAPE_SPACE_OVER_FILEMARK 1
+#define IDETAPE_SPACE_TO_EOD 3
+
+/* Some defines for the LOAD UNLOAD command */
+#define IDETAPE_LU_LOAD_MASK 1
+#define IDETAPE_LU_RETENSION_MASK 2
+#define IDETAPE_LU_EOT_MASK 4
/*
- * Packet command flag bits.
+ * Special requests for our block device strategy routine.
+ *
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
*/
-/* Set when an error is considered normal - We won't retry */
-#define PC_ABORT 0
-/* 1 When polling for DSC on a media access command */
-#define PC_WAIT_FOR_DSC 1
-/* 1 when we prefer to use DMA if possible */
-#define PC_DMA_RECOMMENDED 2
-/* 1 while DMA in progress */
-#define PC_DMA_IN_PROGRESS 3
-/* 1 when encountered problem during DMA */
-#define PC_DMA_ERROR 4
-/* Data direction */
-#define PC_WRITING 5
+
+enum {
+ REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
+ REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
+ REQ_IDETAPE_READ = (1 << 2),
+ REQ_IDETAPE_WRITE = (1 << 3),
+};
+
+/* Error codes returned in rq->errors to the higher part of the driver. */
+#define IDETAPE_ERROR_GENERAL 101
+#define IDETAPE_ERROR_FILEMARK 102
+#define IDETAPE_ERROR_EOD 103
+
+/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
+#define IDETAPE_BLOCK_DESCRIPTOR 0
+#define IDETAPE_CAPABILITIES_PAGE 0x2a
+
+/* Tape flag bits values. */
+enum {
+ IDETAPE_FLAG_IGNORE_DSC = (1 << 0),
+ /* 0 When the tape position is unknown */
+ IDETAPE_FLAG_ADDRESS_VALID = (1 << 1),
+ /* Device already opened */
+ IDETAPE_FLAG_BUSY = (1 << 2),
+ /* Error detected in a pipeline stage */
+ IDETAPE_FLAG_PIPELINE_ERR = (1 << 3),
+ /* Attempt to auto-detect the current user block size */
+ IDETAPE_FLAG_DETECT_BS = (1 << 4),
+ /* Currently on a filemark */
+ IDETAPE_FLAG_FILEMARK = (1 << 5),
+ /* DRQ interrupt device */
+ IDETAPE_FLAG_DRQ_INTERRUPT = (1 << 6),
+ /* pipeline active */
+ IDETAPE_FLAG_PIPELINE_ACTIVE = (1 << 7),
+ /* 0 = no tape is loaded, so we don't rewind after ejecting */
+ IDETAPE_FLAG_MEDIUM_PRESENT = (1 << 8),
+};
/* A pipeline stage. */
typedef struct idetape_stage_s {
@@ -258,11 +272,11 @@
* retry, to get detailed information on what went wrong.
*/
/* Current packet command */
- idetape_pc_t *pc;
+ struct ide_atapi_pc *pc;
/* Last failed packet command */
- idetape_pc_t *failed_pc;
+ struct ide_atapi_pc *failed_pc;
/* Packet command stack */
- idetape_pc_t pc_stack[IDETAPE_PC_STACK];
+ struct ide_atapi_pc pc_stack[IDETAPE_PC_STACK];
/* Next free packet command storage space */
int pc_stack_index;
struct request rq_stack[IDETAPE_PC_STACK];
@@ -446,58 +460,6 @@
mutex_unlock(&idetape_ref_mutex);
}
-/* Tape door status */
-#define DOOR_UNLOCKED 0
-#define DOOR_LOCKED 1
-#define DOOR_EXPLICITLY_LOCKED 2
-
-/*
- * Tape flag bits values.
- */
-#define IDETAPE_IGNORE_DSC 0
-#define IDETAPE_ADDRESS_VALID 1 /* 0 When the tape position is unknown */
-#define IDETAPE_BUSY 2 /* Device already opened */
-#define IDETAPE_PIPELINE_ERROR 3 /* Error detected in a pipeline stage */
-#define IDETAPE_DETECT_BS 4 /* Attempt to auto-detect the current user block size */
-#define IDETAPE_FILEMARK 5 /* Currently on a filemark */
-#define IDETAPE_DRQ_INTERRUPT 6 /* DRQ interrupt device */
-#define IDETAPE_READ_ERROR 7
-#define IDETAPE_PIPELINE_ACTIVE 8 /* pipeline active */
-/* 0 = no tape is loaded, so we don't rewind after ejecting */
-#define IDETAPE_MEDIUM_PRESENT 9
-
-/* Some defines for the SPACE command */
-#define IDETAPE_SPACE_OVER_FILEMARK 1
-#define IDETAPE_SPACE_TO_EOD 3
-
-/* Some defines for the LOAD UNLOAD command */
-#define IDETAPE_LU_LOAD_MASK 1
-#define IDETAPE_LU_RETENSION_MASK 2
-#define IDETAPE_LU_EOT_MASK 4
-
-/*
- * Special requests for our block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-
-enum {
- REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
- REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
- REQ_IDETAPE_READ = (1 << 2),
- REQ_IDETAPE_WRITE = (1 << 3),
-};
-
-/* Error codes returned in rq->errors to the higher part of the driver. */
-#define IDETAPE_ERROR_GENERAL 101
-#define IDETAPE_ERROR_FILEMARK 102
-#define IDETAPE_ERROR_EOD 103
-
-/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
-#define IDETAPE_BLOCK_DESCRIPTOR 0
-#define IDETAPE_CAPABILITIES_PAGE 0x2a
-
/*
* The variables below are used for the character device interface. Additional
* state variables are defined in our ide_drive_t structure.
@@ -518,17 +480,7 @@
return tape;
}
-/*
- * Too bad. The drive wants to send us data which we are not ready to accept.
- * Just throw it away.
- */
-static void idetape_discard_data(ide_drive_t *drive, unsigned int bcount)
-{
- while (bcount--)
- (void) HWIF(drive)->INB(IDE_DATA_REG);
-}
-
-static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount)
{
struct idetape_bh *bh = pc->bh;
@@ -538,7 +490,7 @@
if (bh == NULL) {
printk(KERN_ERR "ide-tape: bh == NULL in "
"idetape_input_buffers\n");
- idetape_discard_data(drive, bcount);
+ ide_atapi_discard_data(drive, bcount);
return;
}
count = min(
@@ -557,7 +509,7 @@
pc->bh = bh;
}
-static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc,
+static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
unsigned int bcount)
{
struct idetape_bh *bh = pc->bh;
@@ -585,13 +537,13 @@
}
}
-static void idetape_update_buffers(idetape_pc_t *pc)
+static void idetape_update_buffers(struct ide_atapi_pc *pc)
{
struct idetape_bh *bh = pc->bh;
int count;
- unsigned int bcount = pc->actually_transferred;
+ unsigned int bcount = pc->xferred;
- if (test_bit(PC_WRITING, &pc->flags))
+ if (pc->flags & PC_FLAG_WRITING)
return;
while (bcount) {
if (bh == NULL) {
@@ -614,7 +566,7 @@
* driver. A storage space for a maximum of IDETAPE_PC_STACK packet
* commands is allocated at initialization time.
*/
-static idetape_pc_t *idetape_next_pc_storage(ide_drive_t *drive)
+static struct ide_atapi_pc *idetape_next_pc_storage(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
@@ -649,14 +601,14 @@
return (&tape->rq_stack[tape->rq_stack_index++]);
}
-static void idetape_init_pc(idetape_pc_t *pc)
+static void idetape_init_pc(struct ide_atapi_pc *pc)
{
memset(pc->c, 0, 12);
pc->retries = 0;
pc->flags = 0;
- pc->request_transfer = 0;
- pc->buffer = pc->pc_buffer;
- pc->buffer_size = IDETAPE_PC_BUFFER_SIZE;
+ pc->req_xfer = 0;
+ pc->buf = pc->pc_buf;
+ pc->buf_size = IDETAPE_PC_BUFFER_SIZE;
pc->bh = NULL;
pc->b_data = NULL;
}
@@ -668,7 +620,7 @@
static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t *pc = tape->failed_pc;
+ struct ide_atapi_pc *pc = tape->failed_pc;
tape->sense_key = sense[2] & 0xF;
tape->asc = sense[12];
@@ -677,9 +629,9 @@
debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n",
pc->c[0], tape->sense_key, tape->asc, tape->ascq);
- /* Correct pc->actually_transferred by asking the tape. */
- if (test_bit(PC_DMA_ERROR, &pc->flags)) {
- pc->actually_transferred = pc->request_transfer -
+ /* Correct pc->xferred by asking the tape. */
+ if (pc->flags & PC_FLAG_DMA_ERROR) {
+ pc->xferred = pc->req_xfer -
tape->blk_size *
be32_to_cpu(get_unaligned((u32 *)&sense[3]));
idetape_update_buffers(pc);
@@ -697,27 +649,27 @@
/* don't report an error, everything's ok */
pc->error = 0;
/* don't retry read/write */
- set_bit(PC_ABORT, &pc->flags);
+ pc->flags |= PC_FLAG_ABORT;
}
}
if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
pc->error = IDETAPE_ERROR_FILEMARK;
- set_bit(PC_ABORT, &pc->flags);
+ pc->flags |= PC_FLAG_ABORT;
}
if (pc->c[0] == WRITE_6) {
if ((sense[2] & 0x40) || (tape->sense_key == 0xd
&& tape->asc == 0x0 && tape->ascq == 0x2)) {
pc->error = IDETAPE_ERROR_EOD;
- set_bit(PC_ABORT, &pc->flags);
+ pc->flags |= PC_FLAG_ABORT;
}
}
if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
if (tape->sense_key == 8) {
pc->error = IDETAPE_ERROR_EOD;
- set_bit(PC_ABORT, &pc->flags);
+ pc->flags |= PC_FLAG_ABORT;
}
- if (!test_bit(PC_ABORT, &pc->flags) &&
- pc->actually_transferred)
+ if (!(pc->flags & PC_FLAG_ABORT) &&
+ pc->xferred)
pc->retries = IDETAPE_MAX_PC_RETRIES + 1;
}
}
@@ -872,14 +824,16 @@
if (rq->cmd[0] & REQ_IDETAPE_WRITE) {
remove_stage = 1;
if (error) {
- set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+ set_bit(IDETAPE_FLAG_PIPELINE_ERR,
+ &tape->flags);
if (error == IDETAPE_ERROR_EOD)
idetape_abort_pipeline(drive,
active_stage);
}
} else if (rq->cmd[0] & REQ_IDETAPE_READ) {
if (error == IDETAPE_ERROR_EOD) {
- set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+ set_bit(IDETAPE_FLAG_PIPELINE_ERR,
+ &tape->flags);
idetape_abort_pipeline(drive, active_stage);
}
}
@@ -912,7 +866,7 @@
if (remove_stage)
idetape_remove_stage_head(drive);
if (tape->active_data_rq == NULL)
- clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+ clear_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags);
spin_unlock_irqrestore(&tape->lock, flags);
return 0;
}
@@ -924,7 +878,7 @@
debug_log(DBG_PROCS, "Enter %s\n", __func__);
if (!tape->pc->error) {
- idetape_analyze_error(drive, tape->pc->buffer);
+ idetape_analyze_error(drive, tape->pc->buf);
idetape_end_request(drive, 1, 0);
} else {
printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - "
@@ -934,13 +888,13 @@
return ide_stopped;
}
-static void idetape_create_request_sense_cmd(idetape_pc_t *pc)
+static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
{
idetape_init_pc(pc);
pc->c[0] = REQUEST_SENSE;
pc->c[4] = 20;
- pc->request_transfer = 20;
- pc->callback = &idetape_request_sense_callback;
+ pc->req_xfer = 20;
+ pc->idetape_callback = &idetape_request_sense_callback;
}
static void idetape_init_rq(struct request *rq, u8 cmd)
@@ -965,7 +919,7 @@
* handling functions should queue request to the lower level part and wait for
* their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
*/
-static void idetape_queue_pc_head(ide_drive_t *drive, idetape_pc_t *pc,
+static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
struct request *rq)
{
struct ide_tape_obj *tape = drive->driver_data;
@@ -984,14 +938,14 @@
static ide_startstop_t idetape_retry_pc (ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t *pc;
+ struct ide_atapi_pc *pc;
struct request *rq;
(void)ide_read_error(drive);
pc = idetape_next_pc_storage(drive);
rq = idetape_next_rq_storage(drive);
idetape_create_request_sense_cmd(pc);
- set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+ set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
idetape_queue_pc_head(drive, pc, rq);
return ide_stopped;
}
@@ -1010,7 +964,7 @@
ide_stall_queue(drive, tape->dsc_poll_freq);
}
-typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int);
+typedef void idetape_io_buf(ide_drive_t *, struct ide_atapi_pc *, unsigned int);
/*
* This is the usual interrupt handler which will be called during a packet
@@ -1023,7 +977,7 @@
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t *pc = tape->pc;
+ struct ide_atapi_pc *pc = tape->pc;
xfer_func_t *xferfunc;
idetape_io_buf *iobuf;
unsigned int temp;
@@ -1038,7 +992,7 @@
/* Clear the interrupt */
stat = ide_read_status(drive);
- if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) {
/*
* A DMA error is sometimes expected. For example,
@@ -1061,9 +1015,9 @@
* data transfer will occur, but no DMA error.
* (AS, 19 Apr 2001)
*/
- set_bit(PC_DMA_ERROR, &pc->flags);
+ pc->flags |= PC_FLAG_DMA_ERROR;
} else {
- pc->actually_transferred = pc->request_transfer;
+ pc->xferred = pc->req_xfer;
idetape_update_buffers(pc);
}
debug_log(DBG_PROCS, "DMA finished\n");
@@ -1073,9 +1027,9 @@
/* No more interrupts */
if ((stat & DRQ_STAT) == 0) {
debug_log(DBG_SENSE, "Packet command completed, %d bytes"
- " transferred\n", pc->actually_transferred);
+ " transferred\n", pc->xferred);
- clear_bit(PC_DMA_IN_PROGRESS, &pc->flags);
+ pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
local_irq_enable();
#if SIMULATE_ERRORS
@@ -1088,7 +1042,7 @@
#endif
if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE)
stat &= ~ERR_STAT;
- if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) {
+ if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) {
/* Error detected */
debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
@@ -1104,7 +1058,7 @@
return idetape_retry_pc(drive);
}
pc->error = 0;
- if (test_bit(PC_WAIT_FOR_DSC, &pc->flags) &&
+ if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
(stat & SEEK_STAT) == 0) {
/* Media access command */
tape->dsc_polling_start = jiffies;
@@ -1117,9 +1071,11 @@
if (tape->failed_pc == pc)
tape->failed_pc = NULL;
/* Command finished - Call the callback function */
- return pc->callback(drive);
+ return pc->idetape_callback(drive);
}
- if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
+
+ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
+ pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
printk(KERN_ERR "ide-tape: The tape wants to issue more "
"interrupts in DMA mode\n");
printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n");
@@ -1127,16 +1083,16 @@
return ide_do_reset(drive);
}
/* Get the number of bytes to transfer on this interrupt. */
- bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) |
- hwif->INB(IDE_BCOUNTL_REG);
+ bcount = (hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]) << 8) |
+ hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]);
- ireason = hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);
if (ireason & CD) {
printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
return ide_do_reset(drive);
}
- if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) {
+ if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
/* Hopefully, we will never get here */
printk(KERN_ERR "ide-tape: We wanted to %s, ",
(ireason & IO) ? "Write" : "Read");
@@ -1144,15 +1100,15 @@
(ireason & IO) ? "Read" : "Write");
return ide_do_reset(drive);
}
- if (!test_bit(PC_WRITING, &pc->flags)) {
+ if (!(pc->flags & PC_FLAG_WRITING)) {
/* Reading - Check that we have enough space */
- temp = pc->actually_transferred + bcount;
- if (temp > pc->request_transfer) {
- if (temp > pc->buffer_size) {
+ temp = pc->xferred + bcount;
+ if (temp > pc->req_xfer) {
+ if (temp > pc->buf_size) {
printk(KERN_ERR "ide-tape: The tape wants to "
"send us more data than expected "
"- discarding data\n");
- idetape_discard_data(drive, bcount);
+ ide_atapi_discard_data(drive, bcount);
ide_set_handler(drive, &idetape_pc_intr,
IDETAPE_WAIT_CMD, NULL);
return ide_started;
@@ -1170,11 +1126,11 @@
if (pc->bh)
iobuf(drive, pc, bcount);
else
- xferfunc(drive, pc->current_position, bcount);
+ xferfunc(drive, pc->cur_pos, bcount);
/* Update the current position */
- pc->actually_transferred += bcount;
- pc->current_position += bcount;
+ pc->xferred += bcount;
+ pc->cur_pos += bcount;
debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n",
pc->c[0], bcount);
@@ -1224,7 +1180,7 @@
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t *pc = tape->pc;
+ struct ide_atapi_pc *pc = tape->pc;
int retries = 100;
ide_startstop_t startstop;
u8 ireason;
@@ -1234,12 +1190,12 @@
"yet DRQ isn't asserted\n");
return startstop;
}
- ireason = hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);
while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) {
printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while issuing "
"a packet command, retrying\n");
udelay(100);
- ireason = hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);
if (retries == 0) {
printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while "
"issuing a packet command, ignoring\n");
@@ -1256,7 +1212,7 @@
ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
#ifdef CONFIG_BLK_DEV_IDEDMA
/* Begin DMA, if necessary */
- if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags))
+ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS)
hwif->dma_start(drive);
#endif
/* Send the actual packet */
@@ -1264,7 +1220,8 @@
return ide_started;
}
-static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc)
+static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
+ struct ide_atapi_pc *pc)
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
@@ -1283,13 +1240,13 @@
tape->pc = pc;
if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
- test_bit(PC_ABORT, &pc->flags)) {
+ (pc->flags & PC_FLAG_ABORT)) {
/*
* We will "abort" retrying a packet command in case legitimate
* error code was received (crossing a filemark, or end of the
* media, for example).
*/
- if (!test_bit(PC_ABORT, &pc->flags)) {
+ if (!(pc->flags & PC_FLAG_ABORT)) {
if (!(pc->c[0] == TEST_UNIT_READY &&
tape->sense_key == 2 && tape->asc == 4 &&
(tape->ascq == 1 || tape->ascq == 8))) {
@@ -1304,36 +1261,38 @@
pc->error = IDETAPE_ERROR_GENERAL;
}
tape->failed_pc = NULL;
- return pc->callback(drive);
+ return pc->idetape_callback(drive);
}
debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
pc->retries++;
/* We haven't transferred any data yet */
- pc->actually_transferred = 0;
- pc->current_position = pc->buffer;
+ pc->xferred = 0;
+ pc->cur_pos = pc->buf;
/* Request to transfer the entire buffer at once */
- bcount = pc->request_transfer;
+ bcount = pc->req_xfer;
- if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) {
+ if (pc->flags & PC_FLAG_DMA_ERROR) {
+ pc->flags &= ~PC_FLAG_DMA_ERROR;
printk(KERN_WARNING "ide-tape: DMA disabled, "
"reverting to PIO\n");
ide_dma_off(drive);
}
- if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
+ if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma)
dma_ok = !hwif->dma_setup(drive);
ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK |
IDE_TFLAG_OUT_DEVICE, bcount, dma_ok);
- if (dma_ok) /* Will begin DMA later */
- set_bit(PC_DMA_IN_PROGRESS, &pc->flags);
- if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) {
+ if (dma_ok)
+ /* Will begin DMA later */
+ pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
+ if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags)) {
ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc,
IDETAPE_WAIT_CMD, NULL);
return ide_started;
} else {
- hwif->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG);
+ hwif->OUTB(WIN_PACKETCMD, hwif->io_ports[IDE_COMMAND_OFFSET]);
return idetape_transfer_pc(drive);
}
}
@@ -1349,7 +1308,7 @@
}
/* A mode sense command is used to "sense" tape parameters. */
-static void idetape_create_mode_sense_cmd(idetape_pc_t *pc, u8 page_code)
+static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
{
idetape_init_pc(pc);
pc->c[0] = MODE_SENSE;
@@ -1368,12 +1327,12 @@
/* We will just discard data in that case */
pc->c[4] = 255;
if (page_code == IDETAPE_BLOCK_DESCRIPTOR)
- pc->request_transfer = 12;
+ pc->req_xfer = 12;
else if (page_code == IDETAPE_CAPABILITIES_PAGE)
- pc->request_transfer = 24;
+ pc->req_xfer = 24;
else
- pc->request_transfer = 50;
- pc->callback = &idetape_pc_callback;
+ pc->req_xfer = 50;
+ pc->idetape_callback = &idetape_pc_callback;
}
static void idetape_calculate_speeds(ide_drive_t *drive)
@@ -1442,7 +1401,7 @@
static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t *pc = tape->pc;
+ struct ide_atapi_pc *pc = tape->pc;
u8 stat;
stat = ide_read_status(drive);
@@ -1463,14 +1422,14 @@
pc->error = IDETAPE_ERROR_GENERAL;
tape->failed_pc = NULL;
}
- return pc->callback(drive);
+ return pc->idetape_callback(drive);
}
static ide_startstop_t idetape_rw_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
- int blocks = tape->pc->actually_transferred / tape->blk_size;
+ int blocks = tape->pc->xferred / tape->blk_size;
tape->avg_size += blocks * tape->blk_size;
tape->insert_size += blocks * tape->blk_size;
@@ -1502,47 +1461,49 @@
return ide_stopped;
}
-static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
+static void idetape_create_read_cmd(idetape_tape_t *tape,
+ struct ide_atapi_pc *pc,
unsigned int length, struct idetape_bh *bh)
{
idetape_init_pc(pc);
pc->c[0] = READ_6;
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
- pc->callback = &idetape_rw_callback;
+ pc->idetape_callback = &idetape_rw_callback;
pc->bh = bh;
atomic_set(&bh->b_count, 0);
- pc->buffer = NULL;
- pc->buffer_size = length * tape->blk_size;
- pc->request_transfer = pc->buffer_size;
- if (pc->request_transfer == tape->stage_size)
- set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+ pc->buf = NULL;
+ pc->buf_size = length * tape->blk_size;
+ pc->req_xfer = pc->buf_size;
+ if (pc->req_xfer == tape->stage_size)
+ pc->flags |= PC_FLAG_DMA_RECOMMENDED;
}
-static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc,
+static void idetape_create_write_cmd(idetape_tape_t *tape,
+ struct ide_atapi_pc *pc,
unsigned int length, struct idetape_bh *bh)
{
idetape_init_pc(pc);
pc->c[0] = WRITE_6;
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
- pc->callback = &idetape_rw_callback;
- set_bit(PC_WRITING, &pc->flags);
+ pc->idetape_callback = &idetape_rw_callback;
+ pc->flags |= PC_FLAG_WRITING;
pc->bh = bh;
pc->b_data = bh->b_data;
pc->b_count = atomic_read(&bh->b_count);
- pc->buffer = NULL;
- pc->buffer_size = length * tape->blk_size;
- pc->request_transfer = pc->buffer_size;
- if (pc->request_transfer == tape->stage_size)
- set_bit(PC_DMA_RECOMMENDED, &pc->flags);
+ pc->buf = NULL;
+ pc->buf_size = length * tape->blk_size;
+ pc->req_xfer = pc->buf_size;
+ if (pc->req_xfer == tape->stage_size)
+ pc->flags |= PC_FLAG_DMA_RECOMMENDED;
}
static ide_startstop_t idetape_do_request(ide_drive_t *drive,
struct request *rq, sector_t block)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t *pc = NULL;
+ struct ide_atapi_pc *pc = NULL;
struct request *postponed_rq = tape->postponed_rq;
u8 stat;
@@ -1579,10 +1540,10 @@
stat = ide_read_status(drive);
if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2))
- set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+ set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
if (drive->post_reset == 1) {
- set_bit(IDETAPE_IGNORE_DSC, &tape->flags);
+ set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags);
drive->post_reset = 0;
}
@@ -1590,7 +1551,7 @@
tape->insert_speed = tape->insert_size / 1024 * HZ /
(jiffies - tape->insert_time);
idetape_calculate_speeds(drive);
- if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) &&
+ if (!test_and_clear_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags) &&
(stat & SEEK_STAT) == 0) {
if (postponed_rq == NULL) {
tape->dsc_polling_start = jiffies;
@@ -1629,7 +1590,7 @@
goto out;
}
if (rq->cmd[0] & REQ_IDETAPE_PC1) {
- pc = (idetape_pc_t *) rq->buffer;
+ pc = (struct ide_atapi_pc *) rq->buffer;
rq->cmd[0] &= ~(REQ_IDETAPE_PC1);
rq->cmd[0] |= REQ_IDETAPE_PC2;
goto out;
@@ -1648,7 +1609,7 @@
{
int rc1, rc2;
- rc1 = test_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+ rc1 = test_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags);
rc2 = (tape->active_data_rq != NULL);
return rc1;
}
@@ -1881,7 +1842,7 @@
static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- u8 *readpos = tape->pc->buffer;
+ u8 *readpos = tape->pc->buf;
debug_log(DBG_PROCS, "Enter %s\n", __func__);
@@ -1894,7 +1855,7 @@
if (readpos[0] & 0x4) {
printk(KERN_INFO "ide-tape: Block location is unknown"
"to the tape\n");
- clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
+ clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
idetape_end_request(drive, 0, 0);
} else {
debug_log(DBG_SENSE, "Block Location - %u\n",
@@ -1903,7 +1864,7 @@
tape->partition = readpos[1];
tape->first_frame =
be32_to_cpu(*(u32 *)&readpos[4]);
- set_bit(IDETAPE_ADDRESS_VALID, &tape->flags);
+ set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags);
idetape_end_request(drive, 1, 0);
}
} else {
@@ -1917,20 +1878,20 @@
* writing a filemark otherwise.
*/
static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
- idetape_pc_t *pc, int write_filemark)
+ struct ide_atapi_pc *pc, int write_filemark)
{
idetape_init_pc(pc);
pc->c[0] = WRITE_FILEMARKS;
pc->c[4] = write_filemark;
- set_bit(PC_WAIT_FOR_DSC, &pc->flags);
- pc->callback = &idetape_pc_callback;
+ pc->flags |= PC_FLAG_WAIT_FOR_DSC;
+ pc->idetape_callback = &idetape_pc_callback;
}
-static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc)
+static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
{
idetape_init_pc(pc);
pc->c[0] = TEST_UNIT_READY;
- pc->callback = &idetape_pc_callback;
+ pc->idetape_callback = &idetape_pc_callback;
}
/*
@@ -1946,7 +1907,7 @@
* to the request list without waiting for it to be serviced! In that case, we
* usually use idetape_queue_pc_head().
*/
-static int __idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc)
+static int __idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
struct ide_tape_obj *tape = drive->driver_data;
struct request rq;
@@ -1957,24 +1918,24 @@
return ide_do_drive_cmd(drive, &rq, ide_wait);
}
-static void idetape_create_load_unload_cmd(ide_drive_t *drive, idetape_pc_t *pc,
- int cmd)
+static void idetape_create_load_unload_cmd(ide_drive_t *drive,
+ struct ide_atapi_pc *pc, int cmd)
{
idetape_init_pc(pc);
pc->c[0] = START_STOP;
pc->c[4] = cmd;
- set_bit(PC_WAIT_FOR_DSC, &pc->flags);
- pc->callback = &idetape_pc_callback;
+ pc->flags |= PC_FLAG_WAIT_FOR_DSC;
+ pc->idetape_callback = &idetape_pc_callback;
}
static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
int load_attempted = 0;
/* Wait for the tape to become ready */
- set_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+ set_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
timeout += jiffies;
while (time_before(jiffies, timeout)) {
idetape_create_test_unit_ready_cmd(&pc);
@@ -1998,14 +1959,14 @@
return -EIO;
}
-static int idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc)
+static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
return __idetape_queue_pc_tail(drive, pc);
}
static int idetape_flush_tape_buffers(ide_drive_t *drive)
{
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
int rc;
idetape_create_write_filemark_cmd(drive, &pc, 0);
@@ -2016,18 +1977,18 @@
return 0;
}
-static void idetape_create_read_position_cmd(idetape_pc_t *pc)
+static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc)
{
idetape_init_pc(pc);
pc->c[0] = READ_POSITION;
- pc->request_transfer = 20;
- pc->callback = &idetape_read_position_callback;
+ pc->req_xfer = 20;
+ pc->idetape_callback = &idetape_read_position_callback;
}
static int idetape_read_position(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
int position;
debug_log(DBG_PROCS, "Enter %s\n", __func__);
@@ -2039,7 +2000,8 @@
return position;
}
-static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc,
+static void idetape_create_locate_cmd(ide_drive_t *drive,
+ struct ide_atapi_pc *pc,
unsigned int block, u8 partition, int skip)
{
idetape_init_pc(pc);
@@ -2047,12 +2009,12 @@
pc->c[1] = 2;
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
pc->c[8] = partition;
- set_bit(PC_WAIT_FOR_DSC, &pc->flags);
- pc->callback = &idetape_pc_callback;
+ pc->flags |= PC_FLAG_WAIT_FOR_DSC;
+ pc->idetape_callback = &idetape_pc_callback;
}
-static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_pc_t *pc,
- int prevent)
+static int idetape_create_prevent_cmd(ide_drive_t *drive,
+ struct ide_atapi_pc *pc, int prevent)
{
idetape_tape_t *tape = drive->driver_data;
@@ -2063,7 +2025,7 @@
idetape_init_pc(pc);
pc->c[0] = ALLOW_MEDIUM_REMOVAL;
pc->c[4] = prevent;
- pc->callback = &idetape_pc_callback;
+ pc->idetape_callback = &idetape_pc_callback;
return 1;
}
@@ -2078,7 +2040,7 @@
/* Remove merge stage. */
cnt = tape->merge_stage_size / tape->blk_size;
- if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
+ if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
++cnt; /* Filemarks count as 1 sector */
tape->merge_stage_size = 0;
if (tape->merge_stage != NULL) {
@@ -2087,7 +2049,7 @@
}
/* Clear pipeline flags. */
- clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+ clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags);
tape->chrdev_dir = IDETAPE_DIR_NONE;
/* Remove pipeline stages. */
@@ -2124,7 +2086,7 @@
{
idetape_tape_t *tape = drive->driver_data;
int retval;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
if (tape->chrdev_dir == IDETAPE_DIR_READ)
__idetape_discard_read_pipeline(drive);
@@ -2201,46 +2163,47 @@
if (tape->next_stage == NULL)
return;
if (!idetape_pipeline_active(tape)) {
- set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags);
+ set_bit(IDETAPE_FLAG_PIPELINE_ACTIVE, &tape->flags);
idetape_activate_next_stage(drive);
(void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end);
}
}
-static void idetape_create_inquiry_cmd(idetape_pc_t *pc)
+static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc)
{
idetape_init_pc(pc);
pc->c[0] = INQUIRY;
pc->c[4] = 254;
- pc->request_transfer = 254;
- pc->callback = &idetape_pc_callback;
+ pc->req_xfer = 254;
+ pc->idetape_callback = &idetape_pc_callback;
}
-static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_pc_t *pc)
+static void idetape_create_rewind_cmd(ide_drive_t *drive,
+ struct ide_atapi_pc *pc)
{
idetape_init_pc(pc);
pc->c[0] = REZERO_UNIT;
- set_bit(PC_WAIT_FOR_DSC, &pc->flags);
- pc->callback = &idetape_pc_callback;
+ pc->flags |= PC_FLAG_WAIT_FOR_DSC;
+ pc->idetape_callback = &idetape_pc_callback;
}
-static void idetape_create_erase_cmd(idetape_pc_t *pc)
+static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)
{
idetape_init_pc(pc);
pc->c[0] = ERASE;
pc->c[1] = 1;
- set_bit(PC_WAIT_FOR_DSC, &pc->flags);
- pc->callback = &idetape_pc_callback;
+ pc->flags |= PC_FLAG_WAIT_FOR_DSC;
+ pc->idetape_callback = &idetape_pc_callback;
}
-static void idetape_create_space_cmd(idetape_pc_t *pc, int count, u8 cmd)
+static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
{
idetape_init_pc(pc);
pc->c[0] = SPACE;
put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
pc->c[1] = cmd;
- set_bit(PC_WAIT_FOR_DSC, &pc->flags);
- pc->callback = &idetape_pc_callback;
+ pc->flags |= PC_FLAG_WAIT_FOR_DSC;
+ pc->idetape_callback = &idetape_pc_callback;
}
static void idetape_wait_first_stage(ide_drive_t *drive)
@@ -2326,7 +2289,7 @@
idetape_plug_pipeline(drive);
}
}
- if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
+ if (test_and_clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags))
/* Return a deferred error */
return -EIO;
return blocks;
@@ -2402,7 +2365,7 @@
__idetape_kfree_stage(tape->merge_stage);
tape->merge_stage = NULL;
}
- clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+ clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags);
tape->chrdev_dir = IDETAPE_DIR_NONE;
/*
@@ -2490,7 +2453,7 @@
rq.sector = tape->first_frame;
rq.nr_sectors = blocks;
rq.current_nr_sectors = blocks;
- if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) &&
+ if (!test_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags) &&
tape->nr_stages < max_stages) {
new_stage = idetape_kmalloc_stage(tape);
while (new_stage != NULL) {
@@ -2527,13 +2490,13 @@
debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
/* If we are at a filemark, return a read length of 0 */
- if (test_bit(IDETAPE_FILEMARK, &tape->flags))
+ if (test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
return 0;
/* Wait for the next block to reach the head of the pipeline. */
idetape_init_read(drive, tape->max_stages);
if (tape->first_stage == NULL) {
- if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags))
+ if (test_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags))
return 0;
return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
tape->merge_stage->bh);
@@ -2550,7 +2513,7 @@
else {
idetape_switch_buffers(tape, tape->first_stage);
if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK)
- set_bit(IDETAPE_FILEMARK, &tape->flags);
+ set_bit(IDETAPE_FLAG_FILEMARK, &tape->flags);
spin_lock_irqsave(&tape->lock, flags);
idetape_remove_stage_head(drive);
spin_unlock_irqrestore(&tape->lock, flags);
@@ -2618,7 +2581,7 @@
static int idetape_rewind_tape(ide_drive_t *drive)
{
int retval;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
idetape_tape_t *tape;
tape = drive->driver_data;
@@ -2681,7 +2644,7 @@
int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
unsigned long flags;
int retval, count = 0;
int sprev = !!(tape->caps[4] & 0x20);
@@ -2697,12 +2660,13 @@
if (tape->chrdev_dir == IDETAPE_DIR_READ) {
/* its a read-ahead buffer, scan it for crossed filemarks. */
tape->merge_stage_size = 0;
- if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags))
+ if (test_and_clear_bit(IDETAPE_FLAG_FILEMARK, &tape->flags))
++count;
while (tape->first_stage != NULL) {
if (count == mt_count) {
if (mt_op == MTFSFM)
- set_bit(IDETAPE_FILEMARK, &tape->flags);
+ set_bit(IDETAPE_FLAG_FILEMARK,
+ &tape->flags);
return 0;
}
spin_lock_irqsave(&tape->lock, flags);
@@ -2786,7 +2750,7 @@
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
if (tape->chrdev_dir != IDETAPE_DIR_READ) {
- if (test_bit(IDETAPE_DETECT_BS, &tape->flags))
+ if (test_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags))
if (count > tape->blk_size &&
(count % tape->blk_size) == 0)
tape->user_bs_factor = count / tape->blk_size;
@@ -2829,7 +2793,7 @@
tape->merge_stage_size = bytes_read-temp;
}
finish:
- if (!actually_read && test_bit(IDETAPE_FILEMARK, &tape->flags)) {
+ if (!actually_read && test_bit(IDETAPE_FLAG_FILEMARK, &tape->flags)) {
debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
idetape_space_over_filemarks(drive, MTFSF, 1);
@@ -2938,7 +2902,7 @@
static int idetape_write_filemark(ide_drive_t *drive)
{
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
/* Write a filemark */
idetape_create_write_filemark_cmd(drive, &pc, 1);
@@ -2966,7 +2930,7 @@
static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
int i, retval;
debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n",
@@ -3022,7 +2986,7 @@
!IDETAPE_LU_LOAD_MASK);
retval = idetape_queue_pc_tail(drive, &pc);
if (!retval)
- clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags);
+ clear_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags);
return retval;
case MTNOP:
idetape_discard_read_pipeline(drive, 0);
@@ -3045,9 +3009,9 @@
mt_count % tape->blk_size)
return -EIO;
tape->user_bs_factor = mt_count / tape->blk_size;
- clear_bit(IDETAPE_DETECT_BS, &tape->flags);
+ clear_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
} else
- set_bit(IDETAPE_DETECT_BS, &tape->flags);
+ set_bit(IDETAPE_FLAG_DETECT_BS, &tape->flags);
return 0;
case MTSEEK:
idetape_discard_read_pipeline(drive, 0);
@@ -3149,7 +3113,7 @@
static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
if (idetape_queue_pc_tail(drive, &pc)) {
@@ -3161,10 +3125,10 @@
}
return;
}
- tape->blk_size = (pc.buffer[4 + 5] << 16) +
- (pc.buffer[4 + 6] << 8) +
- pc.buffer[4 + 7];
- tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7;
+ tape->blk_size = (pc.buf[4 + 5] << 16) +
+ (pc.buf[4 + 6] << 8) +
+ pc.buf[4 + 7];
+ tape->drv_write_prot = (pc.buf[2] & 0x80) >> 7;
}
static int idetape_chrdev_open(struct inode *inode, struct file *filp)
@@ -3172,7 +3136,7 @@
unsigned int minor = iminor(inode), i = minor & ~0xc0;
ide_drive_t *drive;
idetape_tape_t *tape;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
int retval;
if (i >= MAX_HWIFS * MAX_DRIVES)
@@ -3195,24 +3159,24 @@
filp->private_data = tape;
- if (test_and_set_bit(IDETAPE_BUSY, &tape->flags)) {
+ if (test_and_set_bit(IDETAPE_FLAG_BUSY, &tape->flags)) {
retval = -EBUSY;
goto out_put_tape;
}
retval = idetape_wait_ready(drive, 60 * HZ);
if (retval) {
- clear_bit(IDETAPE_BUSY, &tape->flags);
+ clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
printk(KERN_ERR "ide-tape: %s: drive not ready\n", tape->name);
goto out_put_tape;
}
idetape_read_position(drive);
- if (!test_bit(IDETAPE_ADDRESS_VALID, &tape->flags))
+ if (!test_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags))
(void)idetape_rewind_tape(drive);
if (tape->chrdev_dir != IDETAPE_DIR_READ)
- clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags);
+ clear_bit(IDETAPE_FLAG_PIPELINE_ERR, &tape->flags);
/* Read block size and write protect status from drive. */
ide_tape_get_bsize_from_bdesc(drive);
@@ -3227,7 +3191,7 @@
if (tape->write_prot) {
if ((filp->f_flags & O_ACCMODE) == O_WRONLY ||
(filp->f_flags & O_ACCMODE) == O_RDWR) {
- clear_bit(IDETAPE_BUSY, &tape->flags);
+ clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
retval = -EROFS;
goto out_put_tape;
}
@@ -3272,7 +3236,7 @@
{
struct ide_tape_obj *tape = ide_tape_f(filp);
ide_drive_t *drive = tape->drive;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
unsigned int minor = iminor(inode);
lock_kernel();
@@ -3292,7 +3256,7 @@
__idetape_kfree_stage(tape->cache_stage);
tape->cache_stage = NULL;
}
- if (minor < 128 && test_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags))
+ if (minor < 128 && test_bit(IDETAPE_FLAG_MEDIUM_PRESENT, &tape->flags))
(void) idetape_rewind_tape(drive);
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
if (tape->door_locked == DOOR_LOCKED) {
@@ -3302,7 +3266,7 @@
}
}
}
- clear_bit(IDETAPE_BUSY, &tape->flags);
+ clear_bit(IDETAPE_FLAG_BUSY, &tape->flags);
ide_tape_put(tape);
unlock_kernel();
return 0;
@@ -3350,7 +3314,7 @@
static void idetape_get_inquiry_results(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
char fw_rev[6], vendor_id[10], product_id[18];
idetape_create_inquiry_cmd(&pc);
@@ -3359,9 +3323,9 @@
tape->name);
return;
}
- memcpy(vendor_id, &pc.buffer[8], 8);
- memcpy(product_id, &pc.buffer[16], 16);
- memcpy(fw_rev, &pc.buffer[32], 4);
+ memcpy(vendor_id, &pc.buf[8], 8);
+ memcpy(product_id, &pc.buf[16], 16);
+ memcpy(fw_rev, &pc.buf[32], 4);
ide_fixstring(vendor_id, 10, 0);
ide_fixstring(product_id, 18, 0);
@@ -3378,7 +3342,7 @@
static void idetape_get_mode_sense_results(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- idetape_pc_t pc;
+ struct ide_atapi_pc pc;
u8 *caps;
u8 speed, max_speed;
@@ -3392,7 +3356,7 @@
put_unaligned(6*52, (u16 *)&tape->caps[16]);
return;
}
- caps = pc.buffer + 4 + pc.buffer[3];
+ caps = pc.buf + 4 + pc.buf[3];
/* convert to host order and save for later use */
speed = be16_to_cpu(*(u16 *)&caps[14]);
@@ -3506,7 +3470,7 @@
/* Command packet DRQ type */
if (((gcw[0] & 0x60) >> 5) == 1)
- set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags);
+ set_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags);
tape->min_pipeline = 10;
tape->max_pipeline = 10;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 4c86a8d..155cc90 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -59,32 +59,34 @@
SELECT_MASK(drive, 0);
if (task->tf_flags & IDE_TFLAG_OUT_DATA)
- hwif->OUTW((tf->hob_data << 8) | tf->data, IDE_DATA_REG);
+ hwif->OUTW((tf->hob_data << 8) | tf->data,
+ hwif->io_ports[IDE_DATA_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
- hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG);
+ hwif->OUTB(tf->hob_feature, hwif->io_ports[IDE_FEATURE_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
- hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG);
+ hwif->OUTB(tf->hob_nsect, hwif->io_ports[IDE_NSECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
- hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG);
+ hwif->OUTB(tf->hob_lbal, hwif->io_ports[IDE_SECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
- hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG);
+ hwif->OUTB(tf->hob_lbam, hwif->io_ports[IDE_LCYL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
- hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG);
+ hwif->OUTB(tf->hob_lbah, hwif->io_ports[IDE_HCYL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
- hwif->OUTB(tf->feature, IDE_FEATURE_REG);
+ hwif->OUTB(tf->feature, hwif->io_ports[IDE_FEATURE_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
- hwif->OUTB(tf->nsect, IDE_NSECTOR_REG);
+ hwif->OUTB(tf->nsect, hwif->io_ports[IDE_NSECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
- hwif->OUTB(tf->lbal, IDE_SECTOR_REG);
+ hwif->OUTB(tf->lbal, hwif->io_ports[IDE_SECTOR_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
- hwif->OUTB(tf->lbam, IDE_LCYL_REG);
+ hwif->OUTB(tf->lbam, hwif->io_ports[IDE_LCYL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
- hwif->OUTB(tf->lbah, IDE_HCYL_REG);
+ hwif->OUTB(tf->lbah, hwif->io_ports[IDE_HCYL_OFFSET]);
if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- hwif->OUTB((tf->device & HIHI) | drive->select.all, IDE_SELECT_REG);
+ hwif->OUTB((tf->device & HIHI) | drive->select.all,
+ hwif->io_ports[IDE_SELECT_OFFSET]);
}
int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf)
@@ -152,7 +154,8 @@
switch (task->data_phase) {
case TASKFILE_MULTI_OUT:
case TASKFILE_OUT:
- hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG);
+ hwif->OUTBSYNC(drive, tf->command,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
ndelay(400); /* FIXME */
return pre_task_out_intr(drive, task->rq);
case TASKFILE_MULTI_IN:
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index fc69fe2..917c72d 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -78,6 +78,8 @@
/* default maximum number of failures */
#define IDE_DEFAULT_MAX_FAILURES 1
+struct class *ide_port_class;
+
static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
IDE2_MAJOR, IDE3_MAJOR,
IDE4_MAJOR, IDE5_MAJOR,
@@ -90,10 +92,6 @@
DEFINE_MUTEX(ide_cfg_mtx);
__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
-#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
-int ide_scan_direction; /* THIS was formerly 2.2.x pci=reverse */
-#endif
-
int noautodma = 0;
#ifdef CONFIG_BLK_DEV_IDEACPI
@@ -109,13 +107,13 @@
EXPORT_SYMBOL(ide_hwifs);
+static void ide_port_init_devices_data(ide_hwif_t *);
+
/*
* Do not even *think* about calling this!
*/
void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
{
- unsigned int unit;
-
/* bulk initialize hwif & drive info with zeros */
memset(hwif, 0, sizeof(ide_hwif_t));
@@ -134,8 +132,20 @@
default_hwif_iops(hwif);
default_hwif_transport(hwif);
+
+ ide_port_init_devices_data(hwif);
+}
+EXPORT_SYMBOL_GPL(ide_init_port_data);
+
+static void ide_port_init_devices_data(ide_hwif_t *hwif)
+{
+ int unit;
+
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
+ u8 j = (hwif->index * MAX_DRIVES) + unit;
+
+ memset(drive, 0, sizeof(*drive));
drive->media = ide_disk;
drive->select.all = (unit<<4)|0xa0;
@@ -147,32 +157,13 @@
drive->special.b.set_geometry = 1;
drive->name[0] = 'h';
drive->name[1] = 'd';
- drive->name[2] = 'a' + (index * MAX_DRIVES) + unit;
+ drive->name[2] = 'a' + j;
drive->max_failures = IDE_DEFAULT_MAX_FAILURES;
- drive->using_dma = 0;
- drive->vdma = 0;
+
INIT_LIST_HEAD(&drive->list);
init_completion(&drive->gendev_rel_comp);
}
}
-EXPORT_SYMBOL_GPL(ide_init_port_data);
-
-static void init_hwif_default(ide_hwif_t *hwif, unsigned int index)
-{
- hw_regs_t hw;
-
- memset(&hw, 0, sizeof(hw_regs_t));
-
- ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, &hwif->irq);
-
- memcpy(hwif->io_ports, hw.io_ports, sizeof(hw.io_ports));
-
- hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET];
-#ifdef CONFIG_BLK_DEV_HD
- if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA)
- hwif->noprobe = 1; /* may be overridden by ide_setup() */
-#endif
-}
/*
* init_ide_data() sets reasonable default values into all fields
@@ -194,7 +185,6 @@
#define MAGIC_COOKIE 0x12345678
static void __init init_ide_data (void)
{
- ide_hwif_t *hwif;
unsigned int index;
static unsigned long magic_cookie = MAGIC_COOKIE;
@@ -204,13 +194,9 @@
/* Initialise all interface structures */
for (index = 0; index < MAX_HWIFS; ++index) {
- hwif = &ide_hwifs[index];
+ ide_hwif_t *hwif = &ide_hwifs[index];
+
ide_init_port_data(hwif, index);
- init_hwif_default(hwif, index);
-#if !defined(CONFIG_PPC32) || !defined(CONFIG_PCI)
- hwif->irq =
- ide_init_default_irq(hwif->io_ports[IDE_DATA_OFFSET]);
-#endif
}
}
@@ -259,7 +245,7 @@
for (i = 0; i < MAX_HWIFS; i++) {
hwif = &ide_hwifs[i];
- if (hwif->io_ports[IDE_DATA_OFFSET] == 0)
+ if (hwif->chipset == ide_unknown)
goto found;
}
@@ -357,108 +343,6 @@
release_region(hwif->io_ports[i], 1);
}
-/**
- * ide_hwif_restore - restore hwif to template
- * @hwif: hwif to update
- * @tmp_hwif: template
- *
- * Restore hwif to a previous state by copying most settings
- * from the template.
- */
-
-static void ide_hwif_restore(ide_hwif_t *hwif, ide_hwif_t *tmp_hwif)
-{
- hwif->hwgroup = tmp_hwif->hwgroup;
-
- hwif->gendev.parent = tmp_hwif->gendev.parent;
-
- hwif->proc = tmp_hwif->proc;
-
- hwif->major = tmp_hwif->major;
- hwif->straight8 = tmp_hwif->straight8;
- hwif->bus_state = tmp_hwif->bus_state;
-
- hwif->host_flags = tmp_hwif->host_flags;
-
- hwif->pio_mask = tmp_hwif->pio_mask;
-
- hwif->ultra_mask = tmp_hwif->ultra_mask;
- hwif->mwdma_mask = tmp_hwif->mwdma_mask;
- hwif->swdma_mask = tmp_hwif->swdma_mask;
-
- hwif->cbl = tmp_hwif->cbl;
-
- hwif->chipset = tmp_hwif->chipset;
- hwif->hold = tmp_hwif->hold;
-
- hwif->dev = tmp_hwif->dev;
-
-#ifdef CONFIG_BLK_DEV_IDEPCI
- hwif->cds = tmp_hwif->cds;
-#endif
-
- hwif->set_pio_mode = tmp_hwif->set_pio_mode;
- hwif->set_dma_mode = tmp_hwif->set_dma_mode;
- hwif->mdma_filter = tmp_hwif->mdma_filter;
- hwif->udma_filter = tmp_hwif->udma_filter;
- hwif->selectproc = tmp_hwif->selectproc;
- hwif->reset_poll = tmp_hwif->reset_poll;
- hwif->pre_reset = tmp_hwif->pre_reset;
- hwif->resetproc = tmp_hwif->resetproc;
- hwif->maskproc = tmp_hwif->maskproc;
- hwif->quirkproc = tmp_hwif->quirkproc;
- hwif->busproc = tmp_hwif->busproc;
-
- hwif->ata_input_data = tmp_hwif->ata_input_data;
- hwif->ata_output_data = tmp_hwif->ata_output_data;
- hwif->atapi_input_bytes = tmp_hwif->atapi_input_bytes;
- hwif->atapi_output_bytes = tmp_hwif->atapi_output_bytes;
-
- hwif->dma_host_set = tmp_hwif->dma_host_set;
- hwif->dma_setup = tmp_hwif->dma_setup;
- hwif->dma_exec_cmd = tmp_hwif->dma_exec_cmd;
- hwif->dma_start = tmp_hwif->dma_start;
- hwif->ide_dma_end = tmp_hwif->ide_dma_end;
- hwif->ide_dma_test_irq = tmp_hwif->ide_dma_test_irq;
- hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq;
- hwif->dma_lost_irq = tmp_hwif->dma_lost_irq;
- hwif->dma_timeout = tmp_hwif->dma_timeout;
-
- hwif->OUTB = tmp_hwif->OUTB;
- hwif->OUTBSYNC = tmp_hwif->OUTBSYNC;
- hwif->OUTW = tmp_hwif->OUTW;
- hwif->OUTSW = tmp_hwif->OUTSW;
- hwif->OUTSL = tmp_hwif->OUTSL;
-
- hwif->INB = tmp_hwif->INB;
- hwif->INW = tmp_hwif->INW;
- hwif->INSW = tmp_hwif->INSW;
- hwif->INSL = tmp_hwif->INSL;
-
- hwif->sg_max_nents = tmp_hwif->sg_max_nents;
-
- hwif->mmio = tmp_hwif->mmio;
- hwif->rqsize = tmp_hwif->rqsize;
-
-#ifndef CONFIG_BLK_DEV_IDECS
- hwif->irq = tmp_hwif->irq;
-#endif
-
- hwif->dma_base = tmp_hwif->dma_base;
- hwif->dma_command = tmp_hwif->dma_command;
- hwif->dma_vendor1 = tmp_hwif->dma_vendor1;
- hwif->dma_status = tmp_hwif->dma_status;
- hwif->dma_vendor3 = tmp_hwif->dma_vendor3;
- hwif->dma_prdtable = tmp_hwif->dma_prdtable;
-
- hwif->config_data = tmp_hwif->config_data;
- hwif->select_data = tmp_hwif->select_data;
- hwif->extra_base = tmp_hwif->extra_base;
- hwif->extra_ports = tmp_hwif->extra_ports;
-
- hwif->hwif_data = tmp_hwif->hwif_data;
-}
-
void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
{
ide_hwgroup_t *hwgroup = hwif->hwgroup;
@@ -494,11 +378,38 @@
spin_unlock_irq(&ide_lock);
}
+/* Called with ide_lock held. */
+static void __ide_port_unregister_devices(ide_hwif_t *hwif)
+{
+ int i;
+
+ for (i = 0; i < MAX_DRIVES; i++) {
+ ide_drive_t *drive = &hwif->drives[i];
+
+ if (drive->present) {
+ spin_unlock_irq(&ide_lock);
+ device_unregister(&drive->gendev);
+ wait_for_completion(&drive->gendev_rel_comp);
+ spin_lock_irq(&ide_lock);
+ }
+ }
+}
+
+void ide_port_unregister_devices(ide_hwif_t *hwif)
+{
+ mutex_lock(&ide_cfg_mtx);
+ spin_lock_irq(&ide_lock);
+ __ide_port_unregister_devices(hwif);
+ hwif->present = 0;
+ ide_port_init_devices_data(hwif);
+ spin_unlock_irq(&ide_lock);
+ mutex_unlock(&ide_cfg_mtx);
+}
+EXPORT_SYMBOL_GPL(ide_port_unregister_devices);
+
/**
* ide_unregister - free an IDE interface
* @index: index of interface (will change soon to a pointer)
- * @init_default: init default hwif flag
- * @restore: restore hwif flag
*
* Perform the final unregister of an IDE interface. At the moment
* we don't refcount interfaces so this will also get split up.
@@ -518,13 +429,11 @@
* This is raving bonkers.
*/
-void ide_unregister(unsigned int index, int init_default, int restore)
+void ide_unregister(unsigned int index)
{
- ide_drive_t *drive;
ide_hwif_t *hwif, *g;
- static ide_hwif_t tmp_hwif; /* protected by ide_cfg_mtx */
ide_hwgroup_t *hwgroup;
- int irq_count = 0, unit;
+ int irq_count = 0;
BUG_ON(index >= MAX_HWIFS);
@@ -535,15 +444,7 @@
hwif = &ide_hwifs[index];
if (!hwif->present)
goto abort;
- for (unit = 0; unit < MAX_DRIVES; ++unit) {
- drive = &hwif->drives[unit];
- if (!drive->present)
- continue;
- spin_unlock_irq(&ide_lock);
- device_unregister(&drive->gendev);
- wait_for_completion(&drive->gendev_rel_comp);
- spin_lock_irq(&ide_lock);
- }
+ __ide_port_unregister_devices(hwif);
hwif->present = 0;
spin_unlock_irq(&ide_lock);
@@ -565,6 +466,7 @@
ide_remove_port_from_hwgroup(hwif);
+ device_unregister(hwif->portdev);
device_unregister(&hwif->gendev);
wait_for_completion(&hwif->gendev_rel_comp);
@@ -576,34 +478,14 @@
unregister_blkdev(hwif->major, hwif->name);
spin_lock_irq(&ide_lock);
- if (hwif->dma_base) {
- (void) ide_release_dma(hwif);
-
- hwif->dma_base = 0;
- hwif->dma_command = 0;
- hwif->dma_vendor1 = 0;
- hwif->dma_status = 0;
- hwif->dma_vendor3 = 0;
- hwif->dma_prdtable = 0;
-
- hwif->extra_base = 0;
- hwif->extra_ports = 0;
- }
+ if (hwif->dma_base)
+ (void)ide_release_dma(hwif);
ide_hwif_release_regions(hwif);
- /* copy original settings */
- tmp_hwif = *hwif;
-
/* restore hwif data to pristine status */
ide_init_port_data(hwif, index);
- if (init_default)
- init_hwif_default(hwif, index);
-
- if (restore)
- ide_hwif_restore(hwif, &tmp_hwif);
-
abort:
spin_unlock_irq(&ide_lock);
mutex_unlock(&ide_cfg_mtx);
@@ -622,79 +504,6 @@
}
EXPORT_SYMBOL_GPL(ide_init_port_hw);
-ide_hwif_t *ide_deprecated_find_port(unsigned long base)
-{
- ide_hwif_t *hwif;
- int i;
-
- for (i = 0; i < MAX_HWIFS; i++) {
- hwif = &ide_hwifs[i];
- if (hwif->io_ports[IDE_DATA_OFFSET] == base)
- goto found;
- }
-
- for (i = 0; i < MAX_HWIFS; i++) {
- hwif = &ide_hwifs[i];
- if (hwif->hold)
- continue;
- if (!hwif->present && hwif->mate == NULL)
- goto found;
- }
-
- hwif = NULL;
-found:
- return hwif;
-}
-EXPORT_SYMBOL_GPL(ide_deprecated_find_port);
-
-/**
- * ide_register_hw - register IDE interface
- * @hw: hardware registers
- * @quirkproc: quirkproc function
- * @hwifp: pointer to returned hwif
- *
- * Register an IDE interface, specifying exactly the registers etc.
- *
- * Returns -1 on error.
- */
-
-int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *),
- ide_hwif_t **hwifp)
-{
- int index, retry = 1;
- ide_hwif_t *hwif;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-
- do {
- hwif = ide_deprecated_find_port(hw->io_ports[IDE_DATA_OFFSET]);
- if (hwif)
- goto found;
- for (index = 0; index < MAX_HWIFS; index++)
- ide_unregister(index, 1, 1);
- } while (retry--);
- return -1;
-found:
- index = hwif->index;
- if (hwif->present)
- ide_unregister(index, 0, 1);
- else if (!hwif->hold)
- ide_init_port_data(hwif, index);
-
- ide_init_port_hw(hwif, hw);
- hwif->quirkproc = quirkproc;
-
- idx[0] = index;
-
- ide_device_add(idx, NULL);
-
- if (hwifp)
- *hwifp = hwif;
-
- return hwif->present ? index : -1;
-}
-
-EXPORT_SYMBOL(ide_register_hw);
-
/*
* Locks for IDE setting functionality
*/
@@ -997,27 +806,6 @@
if (!capable(CAP_SYS_RAWIO))
return -EACCES;
return ide_task_ioctl(drive, cmd, arg);
-
- case HDIO_SCAN_HWIF:
- {
- hw_regs_t hw;
- int args[3];
- if (!capable(CAP_SYS_RAWIO)) return -EACCES;
- if (copy_from_user(args, p, 3 * sizeof(int)))
- return -EFAULT;
- memset(&hw, 0, sizeof(hw));
- ide_init_hwif_ports(&hw, (unsigned long) args[0],
- (unsigned long) args[1], NULL);
- hw.irq = args[2];
- if (ide_register_hw(&hw, NULL, NULL) == -1)
- return -EIO;
- return 0;
- }
- case HDIO_UNREGISTER_HWIF:
- if (!capable(CAP_SYS_RAWIO)) return -EACCES;
- /* (arg > MAX_HWIFS) checked in function */
- ide_unregister(arg, 1, 1);
- return 0;
case HDIO_SET_NICE:
if (!capable(CAP_SYS_ADMIN)) return -EACCES;
if (arg != (arg & ((1 << IDE_NICE_DSC_OVERLAP) | (1 << IDE_NICE_1))))
@@ -1071,8 +859,6 @@
case HDIO_SET_BUSSTATE:
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- if (HWIF(drive)->busproc)
- return HWIF(drive)->busproc(drive, (int)arg);
return -EOPNOTSUPP;
default:
return -EINVAL;
@@ -1173,8 +959,9 @@
extern int probe_ht6560b;
extern int probe_qd65xx;
extern int cmd640_vlb;
+extern int probe_4drives;
-static int __initdata is_chipset_set[MAX_HWIFS];
+static int __initdata is_chipset_set;
/*
* ide_setup() gets called VERY EARLY during initialization,
@@ -1217,14 +1004,6 @@
goto obsolete_option;
}
-#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
- if (!strcmp(s, "ide=reverse")) {
- ide_scan_direction = 1;
- printk(" : Enabled support for IDE inverse scan order.\n");
- goto obsolete_option;
- }
-#endif
-
#ifdef CONFIG_BLK_DEV_IDEACPI
if (!strcmp(s, "ide=noacpi")) {
//printk(" : Disable IDE ACPI support.\n");
@@ -1335,13 +1114,11 @@
* (-8, -9, -10) are reserved to ease the hardcoding.
*/
static const char *ide_words[] = {
- "noprobe", "serialize", "minus3", "minus4",
+ "minus1", "serialize", "minus3", "minus4",
"reset", "minus6", "ata66", "minus8", "minus9",
"minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
"dtc2278", "umc8672", "ali14xx", NULL };
- hw_regs_t hwregs;
-
hw = s[3] - '0';
hwif = &ide_hwifs[hw];
i = match_parm(&s[4], ide_words, vals, 3);
@@ -1350,19 +1127,14 @@
* Cryptic check to ensure chipset not already set for hwif.
* Note: we can't depend on hwif->chipset here.
*/
- if ((i >= -18 && i <= -11) || (i > 0 && i <= 3)) {
+ if (i >= -18 && i <= -11) {
/* chipset already specified */
- if (is_chipset_set[hw])
+ if (is_chipset_set)
goto bad_option;
- if (i > -18 && i <= -11) {
- /* these drivers are for "ide0=" only */
- if (hw != 0)
- goto bad_hwif;
- /* chipset already specified for 2nd port */
- if (is_chipset_set[hw+1])
- goto bad_option;
- }
- is_chipset_set[hw] = 1;
+ /* these drivers are for "ide0=" only */
+ if (hw != 0)
+ goto bad_hwif;
+ is_chipset_set = 1;
printk("\n");
}
@@ -1399,19 +1171,9 @@
#endif
#ifdef CONFIG_BLK_DEV_4DRIVES
case -11: /* "four" drives on one set of ports */
- {
- ide_hwif_t *mate = &ide_hwifs[hw^1];
- mate->drives[0].select.all ^= 0x20;
- mate->drives[1].select.all ^= 0x20;
- hwif->chipset = mate->chipset = ide_4drives;
- mate->irq = hwif->irq;
- memcpy(mate->io_ports, hwif->io_ports, sizeof(hwif->io_ports));
- hwif->mate = mate;
- mate->mate = hwif;
- hwif->serialized = mate->serialized = 1;
+ probe_4drives = 1;
goto obsolete_option;
- }
-#endif /* CONFIG_BLK_DEV_4DRIVES */
+#endif
case -10: /* minus10 */
case -9: /* minus9 */
case -8: /* minus8 */
@@ -1439,24 +1201,12 @@
hwif->serialized = hwif->mate->serialized = 1;
goto obsolete_option;
- case -1: /* "noprobe" */
- hwif->noprobe = 1;
- goto obsolete_option;
-
- case 1: /* base */
- vals[1] = vals[0] + 0x206; /* default ctl */
- case 2: /* base,ctl */
- vals[2] = 0; /* default irq = probe for it */
- case 3: /* base,ctl,irq */
- memset(&hwregs, 0, sizeof(hwregs));
- ide_init_hwif_ports(&hwregs, vals[0], vals[1], &hwif->irq);
- memcpy(hwif->io_ports, hwregs.io_ports, sizeof(hwif->io_ports));
- hwif->irq = vals[2];
- hwif->noprobe = 0;
- hwif->chipset = ide_forced;
- goto obsolete_option;
-
- case 0: goto bad_option;
+ case -1:
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ goto bad_option;
default:
printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n");
return 1;
@@ -1601,6 +1351,13 @@
EXPORT_SYMBOL_GPL(ide_bus_type);
+static void ide_port_class_release(struct device *portdev)
+{
+ ide_hwif_t *hwif = dev_get_drvdata(portdev);
+
+ put_device(&hwif->gendev);
+}
+
/*
* This is gets invoked once during initialization, to set *everything* up
*/
@@ -1621,11 +1378,23 @@
return ret;
}
+ ide_port_class = class_create(THIS_MODULE, "ide_port");
+ if (IS_ERR(ide_port_class)) {
+ ret = PTR_ERR(ide_port_class);
+ goto out_port_class;
+ }
+ ide_port_class->dev_release = ide_port_class_release;
+
init_ide_data();
proc_ide_create();
return 0;
+
+out_port_class:
+ bus_unregister(&ide_bus_type);
+
+ return ret;
}
#ifdef MODULE
@@ -1658,10 +1427,12 @@
int index;
for (index = 0; index < MAX_HWIFS; ++index)
- ide_unregister(index, 0, 0);
+ ide_unregister(index);
proc_ide_destroy();
+ class_destroy(ide_port_class);
+
bus_unregister(&ide_bus_type);
}
diff --git a/drivers/ide/legacy/Makefile b/drivers/ide/legacy/Makefile
index 7043ec7..6939329 100644
--- a/drivers/ide/legacy/Makefile
+++ b/drivers/ide/legacy/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o
obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o
obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o
+obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o
obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o
obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index d4d1a6b..bc8b1f8 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -200,6 +200,7 @@
static int __init ali14xx_probe(void)
{
static u8 idx[4] = { 0, 1, 0xff, 0xff };
+ hw_regs_t hw[2];
printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
basePort, regOn);
@@ -210,6 +211,17 @@
return 1;
}
+ memset(&hw, 0, sizeof(hw));
+
+ ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
+ hw[0].irq = 14;
+
+ ide_std_init_ports(&hw[1], 0x170, 0x376);
+ hw[1].irq = 15;
+
+ ide_init_port_hw(&ide_hwifs[0], &hw[0]);
+ ide_init_port_hw(&ide_hwifs[1], &hw[1]);
+
ide_hwifs[0].set_pio_mode = &ali14xx_set_pio_mode;
ide_hwifs[1].set_pio_mode = &ali14xx_set_pio_mode;
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 50ffa87..fdd3791 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -241,3 +241,5 @@
}
module_init(buddha_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c
index 73396f7..5f69cd2 100644
--- a/drivers/ide/legacy/dtc2278.c
+++ b/drivers/ide/legacy/dtc2278.c
@@ -103,6 +103,7 @@
unsigned long flags;
ide_hwif_t *hwif, *mate;
static u8 idx[4] = { 0, 1, 0xff, 0xff };
+ hw_regs_t hw[2];
hwif = &ide_hwifs[0];
mate = &ide_hwifs[1];
@@ -128,6 +129,17 @@
#endif
local_irq_restore(flags);
+ memset(&hw, 0, sizeof(hw));
+
+ ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
+ hw[0].irq = 14;
+
+ ide_std_init_ports(&hw[1], 0x170, 0x376);
+ hw[1].irq = 15;
+
+ ide_init_port_hw(hwif, &hw[0]);
+ ide_init_port_hw(mate, &hw[1]);
+
hwif->set_pio_mode = &dtc2278_set_pio_mode;
ide_device_add(idx, &dtc2278_port_info);
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 8949ce7..e950afa 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -93,3 +93,5 @@
}
module_init(falconide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index b7d8109..e3b4638 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -195,3 +195,5 @@
}
module_init(gayle_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 78ca68e..88fe907 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -82,7 +82,7 @@
* out how they setup those cycle time interfacing values, as they at Holtek
* call them. IDESETUP.COM that is supplied with the drivers figures out
* optimal values and fetches those values to drivers. I found out that
- * they use IDE_SELECT_REG to fetch timings to the ide board right after
+ * they use Select register to fetch timings to the ide board right after
* interface switching. After that it was quite easy to add code to
* ht6560b.c.
*
@@ -127,6 +127,7 @@
*/
static void ht6560b_selectproc (ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
unsigned long flags;
static u8 current_select = 0;
static u8 current_timing = 0;
@@ -155,8 +156,8 @@
/*
* Set timing for this drive:
*/
- outb(timing, IDE_SELECT_REG);
- (void)inb(IDE_STATUS_REG);
+ outb(timing, hwif->io_ports[IDE_SELECT_OFFSET]);
+ (void)inb(hwif->io_ports[IDE_STATUS_OFFSET]);
#ifdef DEBUG
printk("ht6560b: %s: select=%#x timing=%#x\n",
drive->name, select, timing);
@@ -193,9 +194,9 @@
* Ht6560b autodetected
*/
outb(HT_CONFIG_DEFAULT, HT_CONFIG_PORT);
- outb(HT_TIMING_DEFAULT, 0x1f6); /* IDE_SELECT_REG */
- (void) inb(0x1f7); /* IDE_STATUS_REG */
-
+ outb(HT_TIMING_DEFAULT, 0x1f6); /* Select register */
+ (void)inb(0x1f7); /* Status register */
+
printk("ht6560b " HT6560B_VERSION
": chipset detected and initialized"
#ifdef DEBUG
@@ -339,6 +340,7 @@
{
ide_hwif_t *hwif, *mate;
static u8 idx[4] = { 0, 1, 0xff, 0xff };
+ hw_regs_t hw[2];
if (probe_ht6560b == 0)
return -ENODEV;
@@ -357,6 +359,17 @@
goto release_region;
}
+ memset(&hw, 0, sizeof(hw));
+
+ ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
+ hw[0].irq = 14;
+
+ ide_std_init_ports(&hw[1], 0x170, 0x376);
+ hw[1].irq = 15;
+
+ ide_init_port_hw(hwif, &hw[0]);
+ ide_init_port_hw(mate, &hw[1]);
+
hwif->selectproc = &ht6560b_selectproc;
hwif->set_pio_mode = &ht6560b_set_pio_mode;
diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c
new file mode 100644
index 0000000..ecd7f35
--- /dev/null
+++ b/drivers/ide/legacy/ide-4drives.c
@@ -0,0 +1,50 @@
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ide.h>
+
+int probe_4drives = 0;
+
+module_param_named(probe, probe_4drives, bool, 0);
+MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port");
+
+static int __init ide_4drives_init(void)
+{
+ ide_hwif_t *hwif, *mate;
+ u8 idx[4] = { 0, 1, 0xff, 0xff };
+ hw_regs_t hw;
+
+ if (probe_4drives == 0)
+ return -ENODEV;
+
+ hwif = &ide_hwifs[0];
+ mate = &ide_hwifs[1];
+
+ memset(&hw, 0, sizeof(hw));
+
+ ide_std_init_ports(&hw, 0x1f0, 0x3f6);
+ hw.irq = 14;
+ hw.chipset = ide_4drives;
+
+ ide_init_port_hw(hwif, &hw);
+ ide_init_port_hw(mate, &hw);
+
+ mate->drives[0].select.all ^= 0x20;
+ mate->drives[1].select.all ^= 0x20;
+
+ hwif->mate = mate;
+ mate->mate = hwif;
+
+ hwif->serialized = mate->serialized = 1;
+
+ ide_device_add(idx, NULL);
+
+ return 0;
+}
+
+module_init(ide_4drives_init);
+
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
+MODULE_DESCRIPTION("generic IDE chipset with 4 drives/port support");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 15ccf69..9a23b94 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -156,15 +156,15 @@
hw.chipset = ide_pci;
hw.dev = &handle->dev;
- hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+ hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL)
return -1;
i = hwif->index;
if (hwif->present)
- ide_unregister(i, 0, 0);
- else if (!hwif->hold)
+ ide_unregister(i);
+ else
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
@@ -360,7 +360,7 @@
if (info->ndev) {
/* FIXME: if this fails we need to queue the cleanup somehow
-- need to investigate the required PCMCIA magic */
- ide_unregister(info->hd, 0, 0);
+ ide_unregister(info->hd);
}
info->ndev = 0;
diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c
index 688fcae..249651e 100644
--- a/drivers/ide/legacy/ide_platform.c
+++ b/drivers/ide/legacy/ide_platform.c
@@ -122,7 +122,7 @@
{
ide_hwif_t *hwif = pdev->dev.driver_data;
- ide_unregister(hwif->index, 0, 0);
+ ide_unregister(hwif->index);
return 0;
}
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index 9a79098..eaf5dbe 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -137,3 +137,5 @@
}
module_init(macide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 1381b91..2da2875 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -153,3 +153,5 @@
}
module_init(q40ide_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index 2f4f47a..7016bdf 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -352,9 +352,9 @@
static int __init qd_probe(int base)
{
ide_hwif_t *hwif;
+ u8 config, unit;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
- u8 config;
- u8 unit;
+ hw_regs_t hw[2];
config = inb(QD_CONFIG_PORT);
@@ -363,6 +363,14 @@
unit = ! (config & QD_CONFIG_IDE_BASEPORT);
+ memset(&hw, 0, sizeof(hw));
+
+ ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
+ hw[0].irq = 14;
+
+ ide_std_init_ports(&hw[1], 0x170, 0x376);
+ hw[1].irq = 15;
+
if ((config & 0xf0) == QD_CONFIG_QD6500) {
if (qd_testreg(base)) return 1; /* bad register */
@@ -379,6 +387,8 @@
return 1;
}
+ ide_init_port_hw(hwif, &hw[unit]);
+
qd_setup(hwif, base, config);
hwif->port_init_devs = qd6500_port_init_devs;
@@ -416,6 +426,8 @@
printk(KERN_INFO "%s: qd6580: single IDE board\n",
hwif->name);
+ ide_init_port_hw(hwif, &hw[unit]);
+
qd_setup(hwif, base, config | (control << 8));
hwif->port_init_devs = qd6580_port_init_devs;
@@ -435,6 +447,9 @@
printk(KERN_INFO "%s&%s: qd6580: dual IDE board\n",
hwif->name, mate->name);
+ ide_init_port_hw(hwif, &hw[0]);
+ ide_init_port_hw(mate, &hw[1]);
+
qd_setup(hwif, base, config | (control << 8));
hwif->port_init_devs = qd6580_port_init_devs;
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
index 5696ba0..bc19448 100644
--- a/drivers/ide/legacy/umc8672.c
+++ b/drivers/ide/legacy/umc8672.c
@@ -130,6 +130,7 @@
{
unsigned long flags;
static u8 idx[4] = { 0, 1, 0xff, 0xff };
+ hw_regs_t hw[2];
if (!request_region(0x108, 2, "umc8672")) {
printk(KERN_ERR "umc8672: ports 0x108-0x109 already in use.\n");
@@ -148,6 +149,17 @@
umc_set_speeds (current_speeds);
local_irq_restore(flags);
+ memset(&hw, 0, sizeof(hw));
+
+ ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
+ hw[0].irq = 14;
+
+ ide_std_init_ports(&hw[1], 0x170, 0x376);
+ hw[1].irq = 15;
+
+ ide_init_port_hw(&ide_hwifs[0], &hw[0]);
+ ide_init_port_hw(&ide_hwifs[1], &hw[1]);
+
ide_hwifs[0].set_pio_mode = &umc_set_pio_mode;
ide_hwifs[1].set_pio_mode = &umc_set_pio_mode;
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 0f4bf5d..9b62824 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -32,19 +32,12 @@
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
-
#include <linux/init.h>
#include <linux/ide.h>
-#include <linux/sysdev.h>
+#include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-
-#include "ide-timing.h"
-
-#include <asm/io.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
-
#include <asm/mach-au1x00/au1xxx_ide.h>
#define DRV_NAME "au1200-ide"
@@ -56,6 +49,8 @@
static _auide_hwif auide_hwif;
static int dbdma_init_done;
+static int auide_ddma_init(_auide_hwif *auide);
+
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
void auide_insw(unsigned long port, void *addr, u32 count)
@@ -591,13 +586,14 @@
goto out;
}
- if (!request_mem_region (res->start, res->end-res->start, pdev->name)) {
+ if (!request_mem_region(res->start, res->end - res->start + 1,
+ pdev->name)) {
pr_debug("%s: request_mem_region failed\n", DRV_NAME);
ret = -EBUSY;
goto out;
}
- ahwif->regbase = (u32)ioremap(res->start, res->end-res->start);
+ ahwif->regbase = (u32)ioremap(res->start, res->end - res->start + 1);
if (ahwif->regbase == 0) {
ret = -ENOMEM;
goto out;
@@ -617,9 +613,6 @@
hwif->dev = dev;
- /* hold should be on in all cases */
- hwif->hold = 1;
-
hwif->mmio = 1;
/* If the user has selected DDMA assisted copies,
@@ -677,12 +670,12 @@
ide_hwif_t *hwif = dev_get_drvdata(dev);
_auide_hwif *ahwif = &auide_hwif;
- ide_unregister(hwif->index, 0, 0);
+ ide_unregister(hwif->index);
iounmap((void *)ahwif->regbase);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res->end - res->start);
+ release_mem_region(res->start, res->end - res->start + 1);
return 0;
}
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index ec66798..a1cfe03 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -409,19 +409,9 @@
*/
static void __init setup_device_ptrs (void)
{
- unsigned int i;
+ cmd_hwif0 = &ide_hwifs[0];
+ cmd_hwif1 = &ide_hwifs[1];
- cmd_hwif0 = &ide_hwifs[0]; /* default, if not found below */
- cmd_hwif1 = &ide_hwifs[1]; /* default, if not found below */
- for (i = 0; i < MAX_HWIFS; i++) {
- ide_hwif_t *hwif = &ide_hwifs[i];
- if (hwif->chipset == ide_unknown || hwif->chipset == ide_forced) {
- if (hwif->io_ports[IDE_DATA_OFFSET] == 0x1f0)
- cmd_hwif0 = hwif;
- else if (hwif->io_ports[IDE_DATA_OFFSET] == 0x170)
- cmd_hwif1 = hwif;
- }
- }
cmd_drives[0] = &cmd_hwif0->drives[0];
cmd_drives[1] = &cmd_hwif0->drives[1];
cmd_drives[2] = &cmd_hwif1->drives[0];
@@ -724,6 +714,7 @@
unsigned int index;
u8 b, cfr;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ hw_regs_t hw[2];
if (cmd640_vlb && probe_for_cmd640_vlb()) {
bus_type = "VLB";
@@ -762,12 +753,23 @@
return 0;
}
+ memset(&hw, 0, sizeof(hw));
+
+ ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
+ hw[0].irq = 14;
+
+ ide_std_init_ports(&hw[1], 0x170, 0x376);
+ hw[1].irq = 15;
+
+ printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
+ "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
+
/*
* Initialize data for primary port
*/
setup_device_ptrs ();
- printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n",
- cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
+
+ ide_init_port_hw(cmd_hwif0, &hw[0]);
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
@@ -787,8 +789,7 @@
/*
* Try to enable the secondary interface, if not already enabled
*/
- if (cmd_hwif1->noprobe ||
- (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe)) {
+ if (cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) {
port2 = "not probed";
} else {
b = get_cmd640_reg(CNTRL);
@@ -820,6 +821,7 @@
* Initialize data for secondary cmd640 port, if enabled
*/
if (second_port_cmd640) {
+ ide_init_port_hw(cmd_hwif1, &hw[1]);
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
@@ -881,3 +883,5 @@
MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset");
module_init(cmd640x_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index 3f9cd64..961698d 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -78,15 +78,15 @@
hw.irq = dev->irq;
hw.chipset = ide_pci; /* this enables IRQ sharing */
- hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+ hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]);
if (hwif == NULL)
goto out_disable;
i = hwif->index;
if (hwif->present)
- ide_unregister(i, 0, 0);
- else if (!hwif->hold)
+ ide_unregister(i);
+ else
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
@@ -120,7 +120,7 @@
ide_hwif_t *hwif = pci_get_drvdata(dev);
if (hwif)
- ide_unregister(hwif->index, 0, 0);
+ ide_unregister(hwif->index);
pci_disable_device(dev);
}
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 6357bb6..82d0e31 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -760,7 +760,7 @@
}
} else
outb(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
- IDE_CONTROL_REG);
+ hwif->io_ports[IDE_CONTROL_OFFSET]);
}
/*
@@ -929,64 +929,6 @@
hpt3xxn_set_clock(HWIF(drive), rq_data_dir(rq) ? 0x23 : 0x21);
}
-/*
- * Set/get power state for a drive.
- * NOTE: affects both drives on each channel.
- *
- * When we turn the power back on, we need to re-initialize things.
- */
-#define TRISTATE_BIT 0x8000
-
-static int hpt3xx_busproc(ide_drive_t *drive, int state)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 mcr_addr = hwif->select_data + 2;
- u8 resetmask = hwif->channel ? 0x80 : 0x40;
- u8 bsr2 = 0;
- u16 mcr = 0;
-
- hwif->bus_state = state;
-
- /* Grab the status. */
- pci_read_config_word(dev, mcr_addr, &mcr);
- pci_read_config_byte(dev, 0x59, &bsr2);
-
- /*
- * Set the state. We don't set it if we don't need to do so.
- * Make sure that the drive knows that it has failed if it's off.
- */
- switch (state) {
- case BUSSTATE_ON:
- if (!(bsr2 & resetmask))
- return 0;
- hwif->drives[0].failures = hwif->drives[1].failures = 0;
-
- pci_write_config_byte(dev, 0x59, bsr2 & ~resetmask);
- pci_write_config_word(dev, mcr_addr, mcr & ~TRISTATE_BIT);
- return 0;
- case BUSSTATE_OFF:
- if ((bsr2 & resetmask) && !(mcr & TRISTATE_BIT))
- return 0;
- mcr &= ~TRISTATE_BIT;
- break;
- case BUSSTATE_TRISTATE:
- if ((bsr2 & resetmask) && (mcr & TRISTATE_BIT))
- return 0;
- mcr |= TRISTATE_BIT;
- break;
- default:
- return -EINVAL;
- }
-
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
-
- pci_write_config_word(dev, mcr_addr, mcr);
- pci_write_config_byte(dev, 0x59, bsr2 | resetmask);
- return 0;
-}
-
/**
* hpt37x_calibrate_dpll - calibrate the DPLL
* @dev: PCI device
@@ -1334,7 +1276,6 @@
hwif->quirkproc = &hpt3xx_quirkproc;
hwif->maskproc = &hpt3xx_maskproc;
- hwif->busproc = &hpt3xx_busproc;
hwif->udma_filter = &hpt3xx_udma_filter;
hwif->mdma_filter = &hpt3xx_mdma_filter;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 1597f0c..d8a1674 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -667,7 +667,7 @@
module_init(it821x_ide_init);
module_param_named(noraid, it8212_noraid, int, S_IRUGO);
-MODULE_PARM_DESC(it8212_noraid, "Force card into bypass mode");
+MODULE_PARM_DESC(noraid, "Force card into bypass mode");
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("PCI driver module for the ITE 821x");
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index bf0d3b2..7551332 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -181,6 +181,10 @@
return 1;
}
+#ifndef ide_default_irq
+#define ide_default_irq(irq) 0
+#endif
+
static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 238e3e1..ef07c7a 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -334,7 +334,8 @@
/* errata A308 workaround: Step5 (check data loss) */
/* We don't check non ide_disk because it is limited to UDMA4 */
- if (!(in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT) &&
+ if (!(in_be32((void __iomem *)hwif->io_ports[IDE_ALTSTATUS_OFFSET])
+ & ERR_STAT) &&
drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
reg = in_be32((void __iomem *)intsts_port);
if (!(reg & INTSTS_ACTEINT)) {
@@ -437,7 +438,8 @@
u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
/* SCC errata A252,A308 workaround: Step4 */
- if ((in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT) &&
+ if ((in_be32((void __iomem *)hwif->io_ports[IDE_ALTSTATUS_OFFSET])
+ & ERR_STAT) &&
(int_stat & INTSTS_INTRQ))
return 1;
@@ -523,6 +525,43 @@
return -ENOMEM;
}
+static int scc_ide_setup_pci_device(struct pci_dev *dev,
+ const struct ide_port_info *d)
+{
+ struct scc_ports *ports = pci_get_drvdata(dev);
+ ide_hwif_t *hwif = NULL;
+ hw_regs_t hw;
+ u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ int i;
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ hwif = &ide_hwifs[i];
+ if (hwif->chipset == ide_unknown)
+ break; /* pick an unused entry */
+ }
+ if (i == MAX_HWIFS) {
+ printk(KERN_ERR "%s: too many IDE interfaces, "
+ "no room in table\n", SCC_PATA_NAME);
+ return -ENOMEM;
+ }
+
+ memset(&hw, 0, sizeof(hw));
+ for (i = IDE_DATA_OFFSET; i <= IDE_CONTROL_OFFSET; i++)
+ hw.io_ports[i] = ports->dma + 0x20 + i * 4;
+ hw.irq = dev->irq;
+ hw.dev = &dev->dev;
+ hw.chipset = ide_pci;
+ ide_init_port_hw(hwif, &hw);
+ hwif->dev = &dev->dev;
+ hwif->cds = d;
+
+ idx[0] = hwif->index;
+
+ ide_device_add(idx, d);
+
+ return 0;
+}
+
/**
* init_setup_scc - set up an SCC PATA Controller
* @dev: PCI device
@@ -545,10 +584,13 @@
struct scc_ports *ports;
int rc;
+ rc = pci_enable_device(dev);
+ if (rc)
+ goto end;
+
rc = setup_mmio_scc(dev, d->name);
- if (rc < 0) {
- return rc;
- }
+ if (rc < 0)
+ goto end;
ports = pci_get_drvdata(dev);
ctl_base = ports->ctl;
@@ -583,7 +625,10 @@
out_be32((void*)mode_port, MODE_JCUSFEN);
out_be32((void*)intmask_port, INTMASK_MSK);
- return ide_setup_pci_device(dev, d);
+ rc = scc_ide_setup_pci_device(dev, d);
+
+ end:
+ return rc;
}
/**
@@ -610,17 +655,6 @@
hwif->OUTSW = scc_ide_outsw;
hwif->OUTSL = scc_ide_outsl;
- hwif->io_ports[IDE_DATA_OFFSET] = dma_base + 0x20;
- hwif->io_ports[IDE_ERROR_OFFSET] = dma_base + 0x24;
- hwif->io_ports[IDE_NSECTOR_OFFSET] = dma_base + 0x28;
- hwif->io_ports[IDE_SECTOR_OFFSET] = dma_base + 0x2c;
- hwif->io_ports[IDE_LCYL_OFFSET] = dma_base + 0x30;
- hwif->io_ports[IDE_HCYL_OFFSET] = dma_base + 0x34;
- hwif->io_ports[IDE_SELECT_OFFSET] = dma_base + 0x38;
- hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
- hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
-
- hwif->irq = dev->irq;
hwif->dma_base = dma_base;
hwif->config_data = ports->ctl;
hwif->mmio = 1;
@@ -736,7 +770,7 @@
hwif->dmatable_cpu = NULL;
}
- ide_unregister(hwif->index, 0, 0);
+ ide_unregister(hwif->index);
hwif->chipset = ide_unknown;
iounmap((void*)ports->dma);
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 0546264..9d1a303 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -112,10 +112,9 @@
sgiioc4_maskproc(ide_drive_t * drive, int mask)
{
writeb(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
- (void __iomem *)IDE_CONTROL_REG);
+ (void __iomem *)drive->hwif->io_ports[IDE_CONTROL_OFFSET]);
}
-
static int
sgiioc4_checkirq(ide_hwif_t * hwif)
{
@@ -142,18 +141,18 @@
intr_reg = readl((void __iomem *)other_ir);
if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
/*
- * Using sgiioc4_INB to read the IDE_STATUS_REG has a side effect
- * of clearing the interrupt. The first read should clear it
- * if it is set. The second read should return a "clear" status
- * if it got cleared. If not, then spin for a bit trying to
- * clear it.
+ * Using sgiioc4_INB to read the Status register has a side
+ * effect of clearing the interrupt. The first read should
+ * clear it if it is set. The second read should return
+ * a "clear" status if it got cleared. If not, then spin
+ * for a bit trying to clear it.
*/
- u8 stat = sgiioc4_INB(IDE_STATUS_REG);
+ u8 stat = sgiioc4_INB(hwif->io_ports[IDE_STATUS_OFFSET]);
int count = 0;
- stat = sgiioc4_INB(IDE_STATUS_REG);
+ stat = sgiioc4_INB(hwif->io_ports[IDE_STATUS_OFFSET]);
while ((stat & 0x80) && (count++ < 100)) {
udelay(1);
- stat = sgiioc4_INB(IDE_STATUS_REG);
+ stat = sgiioc4_INB(hwif->io_ports[IDE_STATUS_OFFSET]);
}
if (intr_reg & 0x02) {
@@ -562,7 +561,6 @@
clear interrupts */
hwif->maskproc = &sgiioc4_maskproc; /* Mask on/off NIEN register */
hwif->quirkproc = NULL;
- hwif->busproc = NULL;
hwif->INB = &sgiioc4_INB;
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index cc4be96..b6be1b4 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -370,48 +370,6 @@
}
/**
- * sil_sata_busproc - bus isolation IOCTL
- * @drive: drive to isolate/restore
- * @state: bus state to set
- *
- * Used by the SII3112 to handle bus isolation. As this is a
- * SATA controller the work required is quite limited, we
- * just have to clean up the statistics
- */
-
-static int sil_sata_busproc(ide_drive_t * drive, int state)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u32 stat_config = 0;
- unsigned long addr = siimage_selreg(hwif, 0);
-
- if (hwif->mmio)
- stat_config = readl((void __iomem *)addr);
- else
- pci_read_config_dword(dev, addr, &stat_config);
-
- switch (state) {
- case BUSSTATE_ON:
- hwif->drives[0].failures = 0;
- hwif->drives[1].failures = 0;
- break;
- case BUSSTATE_OFF:
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- break;
- case BUSSTATE_TRISTATE:
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- break;
- default:
- return -EINVAL;
- }
- hwif->bus_state = state;
- return 0;
-}
-
-/**
* sil_sata_reset_poll - wait for SATA reset
* @drive: drive we are resetting
*
@@ -492,7 +450,7 @@
static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
{
- unsigned long bar5 = pci_resource_start(dev, 5);
+ resource_size_t bar5 = pci_resource_start(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
u8 tmpbyte = 0;
void __iomem *ioaddr;
@@ -818,7 +776,6 @@
if (sata) {
static int first = 1;
- hwif->busproc = &sil_sata_busproc;
hwif->reset_poll = &sil_sata_reset_poll;
hwif->pre_reset = &sil_sata_pre_reset;
hwif->udma_filter = &sil_sata_udma_filter;
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index ee261ae..1f00251 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -328,6 +328,10 @@
.enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
.host_flags = IDE_HFLAG_IO_32BIT |
IDE_HFLAG_UNMASK_IRQS |
+/* FIXME: check for Compatibility mode in generic IDE PCI code */
+#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT)
+ IDE_HFLAG_FORCE_LEGACY_IRQS |
+#endif
IDE_HFLAG_NO_AUTODMA |
IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO5,
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 2ef2ed2..1e4a626 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -126,40 +126,6 @@
ide_dma_start(drive);
}
-static int tc86c001_busproc(ide_drive_t *drive, int state)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long sc_base = hwif->config_data;
- u16 scr1;
-
- /* System Control 1 Register bit 11 (ATA Hard Reset) read */
- scr1 = inw(sc_base + 0x00);
-
- switch (state) {
- case BUSSTATE_ON:
- if (!(scr1 & 0x0800))
- return 0;
- scr1 &= ~0x0800;
-
- hwif->drives[0].failures = hwif->drives[1].failures = 0;
- break;
- case BUSSTATE_OFF:
- if (scr1 & 0x0800)
- return 0;
- scr1 |= 0x0800;
-
- hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
- hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- break;
- default:
- return -EINVAL;
- }
-
- /* System Control 1 Register bit 11 (ATA Hard Reset) write */
- outw(scr1, sc_base + 0x00);
- return 0;
-}
-
static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -194,8 +160,6 @@
hwif->set_pio_mode = &tc86c001_set_pio_mode;
hwif->set_dma_mode = &tc86c001_set_mode;
- hwif->busproc = &tc86c001_busproc;
-
hwif->cable_detect = tc86c001_cable_detect;
if (!hwif->dma_base)
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index 38fbfb8..a784a97 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -99,32 +99,6 @@
/* Make clock cycles and always round up */
#define PCMCIA_MK_CLKS( t, T ) (( (t) * ((T)/1000000) + 999U ) / 1000U )
-
-
-/*
- * IDE stuff.
- */
-static int
-m8xx_ide_default_irq(unsigned long base)
-{
-#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
- if (base >= MAX_HWIFS)
- return 0;
-
- printk("[%d] m8xx_ide_default_irq %d\n",__LINE__,ioport_dsc[base].irq);
-
- return (ioport_dsc[base].irq);
-#else
- return 9;
-#endif
-}
-
-static unsigned long
-m8xx_ide_default_io_base(int index)
-{
- return index;
-}
-
#define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4))
#define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4))
@@ -149,12 +123,11 @@
*/
/*
- * m8xx_ide_init_hwif_ports for a direct IDE interface _using_
+ * m8xx_ide_init_ports() for a direct IDE interface _using_
+ * MPC8xx's internal PCMCIA interface
*/
#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT)
-static void
-m8xx_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
- unsigned long ctrl_port, int *irq)
+static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
{
unsigned long *p = hw->io_ports;
int i;
@@ -173,8 +146,6 @@
unsigned long base;
*p = 0;
- if (irq)
- *irq = 0;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia));
@@ -248,9 +219,6 @@
}
}
- if (data_port >= MAX_HWIFS)
- return;
-
if (_slot_ == -1) {
printk ("PCMCIA slot has not been defined! Using A as default\n");
_slot_ = 0;
@@ -292,11 +260,13 @@
*p++ = base + ioport_dsc[data_port].reg_off[i];
}
- if (irq) {
+ hw->irq = ioport_dsc[data_port].irq;
+ hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack;
+
#ifdef CONFIG_IDE_8xx_PCCARD
+ {
unsigned int reg;
- *irq = ioport_dsc[data_port].irq;
if (_slot_)
pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcrb;
else
@@ -306,14 +276,11 @@
reg |= mk_int_int_mask (pcmcia_schlvl) << 24;
reg |= mk_int_int_mask (pcmcia_schlvl) << 16;
*pgcrx = reg;
-#else /* direct connected IDE drive, i.e. external IRQ, not the PCMCIA irq */
- *irq = ioport_dsc[data_port].irq;
-#endif /* CONFIG_IDE_8xx_PCCARD */
}
+#endif /* CONFIG_IDE_8xx_PCCARD */
ide_hwifs[data_port].pio_mask = ATA_PIO4;
ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
- ide_hwifs[data_port].ack_intr = (ide_ack_intr_t *)ide_interrupt_ack;
/* Enable Harddisk Interrupt,
* and make it edge sensitive
@@ -329,16 +296,15 @@
/* Enable falling edge irq */
pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
#endif /* CONFIG_IDE_8xx_PCCARD */
-} /* m8xx_ide_init_hwif_ports() using 8xx internal PCMCIA interface */
+}
#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
/*
- * m8xx_ide_init_hwif_ports for a direct IDE interface _not_ using
+ * m8xx_ide_init_ports() for a direct IDE interface _not_ using
* MPC8xx's internal PCMCIA interface
*/
#if defined(CONFIG_IDE_EXT_DIRECT)
-void m8xx_ide_init_hwif_ports (hw_regs_t *hw,
- unsigned long data_port, unsigned long ctrl_port, int *irq)
+static void __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
{
unsigned long *p = hw->io_ports;
int i;
@@ -349,8 +315,6 @@
unsigned long base;
*p = 0;
- if (irq)
- *irq = 0;
if (!ide_base) {
@@ -372,9 +336,6 @@
#endif
}
- if (data_port >= MAX_HWIFS)
- return;
-
base = ide_base + ioport_dsc[data_port].base_off;
#ifdef DEBUG
printk ("base: %08x + %08x = %08x\n",
@@ -392,14 +353,12 @@
*p++ = base + ioport_dsc[data_port].reg_off[i];
}
- if (irq) {
- /* direct connected IDE drive, i.e. external IRQ */
- *irq = ioport_dsc[data_port].irq;
- }
+ /* direct connected IDE drive, i.e. external IRQ */
+ hw->irq = ioport_dsc[data_port].irq;
+ hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack;
ide_hwifs[data_port].pio_mask = ATA_PIO4;
ide_hwifs[data_port].set_pio_mode = m8xx_ide_set_pio_mode;
- ide_hwifs[data_port].ack_intr = (ide_ack_intr_t *)ide_interrupt_ack;
/* Enable Harddisk Interrupt,
* and make it edge sensitive
@@ -407,8 +366,7 @@
/* (11-18) Set edge detect for irq, no wakeup from low power mode */
((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
(0x80000000 >> ioport_dsc[data_port].irq);
-} /* m8xx_ide_init_hwif_ports() for CONFIG_IDE_8xx_DIRECT */
-
+}
#endif /* CONFIG_IDE_8xx_DIRECT */
@@ -829,20 +787,20 @@
return (0); /* don't know */
}
-void m8xx_ide_init(void)
-{
- ppc_ide_md.default_irq = m8xx_ide_default_irq;
- ppc_ide_md.default_io_base = m8xx_ide_default_io_base;
- ppc_ide_md.ide_init_hwif = m8xx_ide_init_hwif_ports;
-}
-
static int __init mpc8xx_ide_probe(void)
{
+ hw_regs_t hw;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
#ifdef IDE0_BASE_OFFSET
+ memset(&hw, 0, sizeof(hw));
+ m8xx_ide_init_ports(&hw, 0);
+ ide_init_port_hw(&ide_hwifs[0], &hw);
idx[0] = 0;
#ifdef IDE1_BASE_OFFSET
+ memset(&hw, 0, sizeof(hw));
+ m8xx_ide_init_ports(&hw, 1);
+ ide_init_port_hw(&ide_hwifs[1], &hw);
idx[1] = 1;
#endif
#endif
@@ -853,3 +811,5 @@
}
module_init(mpc8xx_ide_probe);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 78c9eeb..88619b5 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -80,7 +80,6 @@
} pmac_ide_hwif_t;
static pmac_ide_hwif_t pmac_ide[MAX_HWIFS];
-static int pmac_ide_count;
enum {
controller_ohare, /* OHare based */
@@ -419,38 +418,8 @@
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-/*
- * N.B. this can't be an initfunc, because the media-bay task can
- * call ide_[un]register at any time.
- */
-void
-pmac_ide_init_hwif_ports(hw_regs_t *hw,
- unsigned long data_port, unsigned long ctrl_port,
- int *irq)
-{
- int i, ix;
-
- if (data_port == 0)
- return;
-
- for (ix = 0; ix < MAX_HWIFS; ++ix)
- if (data_port == pmac_ide[ix].regbase)
- break;
-
- if (ix >= MAX_HWIFS)
- return; /* not an IDE PMAC interface */
-
- for (i = 0; i < 8; ++i)
- hw->io_ports[i] = data_port + i * 0x10;
- hw->io_ports[8] = data_port + 0x160;
-
- if (irq != NULL)
- *irq = pmac_ide[ix].irq;
-
- hw->dev = &pmac_ide[ix].mdev->ofdev.dev;
-}
-
-#define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x)))
+#define PMAC_IDE_REG(x) \
+ ((void __iomem *)((drive)->hwif->io_ports[IDE_DATA_OFFSET] + (x)))
/*
* Apply the timings of the proper unit (master/slave) to the shared
@@ -886,58 +855,6 @@
pmif->timings[2] = pmif->timings[3] = value2;
}
-unsigned long
-pmac_ide_get_base(int index)
-{
- return pmac_ide[index].regbase;
-}
-
-int
-pmac_ide_check_base(unsigned long base)
-{
- int ix;
-
- for (ix = 0; ix < MAX_HWIFS; ++ix)
- if (base == pmac_ide[ix].regbase)
- return ix;
- return -1;
-}
-
-int
-pmac_ide_get_irq(unsigned long base)
-{
- int ix;
-
- for (ix = 0; ix < MAX_HWIFS; ++ix)
- if (base == pmac_ide[ix].regbase)
- return pmac_ide[ix].irq;
- return 0;
-}
-
-static int ide_majors[] = { 3, 22, 33, 34, 56, 57 };
-
-dev_t __init
-pmac_find_ide_boot(char *bootdevice, int n)
-{
- int i;
-
- /*
- * Look through the list of IDE interfaces for this one.
- */
- for (i = 0; i < pmac_ide_count; ++i) {
- char *name;
- if (!pmac_ide[i].node || !pmac_ide[i].node->full_name)
- continue;
- name = pmac_ide[i].node->full_name;
- if (memcmp(name, bootdevice, n) == 0 && name[n] == 0) {
- /* XXX should cope with the 2nd drive as well... */
- return MKDEV(ide_majors[i], 0);
- }
- }
-
- return 0;
-}
-
/* Suspend call back, should be called after the child devices
* have actually been suspended
*/
@@ -1088,7 +1005,8 @@
if (np->parent && np->parent->name
&& strcasecmp(np->parent->name, "media-bay") == 0) {
#ifdef CONFIG_PMAC_MEDIABAY
- media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq, hwif->index);
+ media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq,
+ hwif);
#endif /* CONFIG_PMAC_MEDIABAY */
pmif->mediabay = 1;
if (!bidp)
@@ -1119,7 +1037,6 @@
hwif->hwif_data = pmif;
ide_init_port_hw(hwif, hw);
hwif->noprobe = pmif->mediabay;
- hwif->hold = pmif->mediabay;
hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
hwif->set_pio_mode = pmac_ide_set_pio_mode;
if (pmif->kind == controller_un_ata6
@@ -1154,6 +1071,15 @@
return 0;
}
+static void __devinit pmac_ide_init_ports(hw_regs_t *hw, unsigned long base)
+{
+ int i;
+
+ for (i = 0; i < 8; ++i)
+ hw->io_ports[i] = base + i * 0x10;
+ hw->io_ports[8] = base + 0x160;
+}
+
/*
* Attach to a macio probed interface
*/
@@ -1227,7 +1153,7 @@
dev_set_drvdata(&mdev->ofdev.dev, hwif);
memset(&hw, 0, sizeof(hw));
- pmac_ide_init_hwif_ports(&hw, pmif->regbase, 0, NULL);
+ pmac_ide_init_ports(&hw, pmif->regbase);
hw.irq = irq;
hw.dev = &mdev->ofdev.dev;
@@ -1341,7 +1267,7 @@
pci_set_drvdata(pdev, hwif);
memset(&hw, 0, sizeof(hw));
- pmac_ide_init_hwif_ports(&hw, pmif->regbase, 0, NULL);
+ pmac_ide_init_ports(&hw, pmif->regbase);
hw.irq = pdev->irq;
hw.dev = &pdev->dev;
@@ -1771,3 +1697,5 @@
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
module_init(pmac_ide_probe);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 634e3f6..f7ede0e 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -41,17 +41,6 @@
ide_hwif_t *hwif;
/*
- * Look for a hwif with matching io_base specified using
- * parameters to ide_setup().
- */
- for (h = 0; h < MAX_HWIFS; ++h) {
- hwif = &ide_hwifs[h];
- if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) {
- if (hwif->chipset == ide_forced)
- return hwif; /* a perfect match */
- }
- }
- /*
* Look for a hwif with matching io_base default value.
* If chipset is "ide_unknown", then claim that hwif slot.
* Otherwise, some other chipset has already claimed it.. :(
@@ -356,7 +345,6 @@
unsigned long ctl = 0, base = 0;
ide_hwif_t *hwif;
u8 bootable = (d->host_flags & IDE_HFLAG_BOOTABLE) ? 1 : 0;
- u8 oldnoprobe = 0;
struct hw_regs_s hw;
if ((d->host_flags & IDE_HFLAG_ISA_PORTS) == 0) {
@@ -382,19 +370,13 @@
return NULL; /* no room in ide_hwifs[] */
memset(&hw, 0, sizeof(hw));
- hw.irq = hwif->irq ? hwif->irq : irq;
+ hw.irq = irq;
hw.dev = &dev->dev;
hw.chipset = d->chipset ? d->chipset : ide_pci;
ide_std_init_ports(&hw, base, ctl | 2);
- if (hwif->io_ports[IDE_DATA_OFFSET] == base &&
- hwif->io_ports[IDE_CONTROL_OFFSET] == (ctl | 2))
- oldnoprobe = hwif->noprobe;
-
ide_init_port_hw(hwif, &hw);
- hwif->noprobe = oldnoprobe;
-
hwif->dev = &dev->dev;
hwif->cds = d;
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index faa7ce3..a47fe64 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -467,6 +467,31 @@
return memcmp(src, dst_data->data, IB_CM_COMPARE_SIZE);
}
+/*
+ * Trivial helpers to strip endian annotation and compare; the
+ * endianness doesn't actually matter since we just need a stable
+ * order for the RB tree.
+ */
+static int be32_lt(__be32 a, __be32 b)
+{
+ return (__force u32) a < (__force u32) b;
+}
+
+static int be32_gt(__be32 a, __be32 b)
+{
+ return (__force u32) a > (__force u32) b;
+}
+
+static int be64_lt(__be64 a, __be64 b)
+{
+ return (__force u64) a < (__force u64) b;
+}
+
+static int be64_gt(__be64 a, __be64 b)
+{
+ return (__force u64) a > (__force u64) b;
+}
+
static struct cm_id_private * cm_insert_listen(struct cm_id_private *cm_id_priv)
{
struct rb_node **link = &cm.listen_service_table.rb_node;
@@ -492,9 +517,9 @@
link = &(*link)->rb_left;
else if (cm_id_priv->id.device > cur_cm_id_priv->id.device)
link = &(*link)->rb_right;
- else if (service_id < cur_cm_id_priv->id.service_id)
+ else if (be64_lt(service_id, cur_cm_id_priv->id.service_id))
link = &(*link)->rb_left;
- else if (service_id > cur_cm_id_priv->id.service_id)
+ else if (be64_gt(service_id, cur_cm_id_priv->id.service_id))
link = &(*link)->rb_right;
else if (data_cmp < 0)
link = &(*link)->rb_left;
@@ -527,9 +552,9 @@
node = node->rb_left;
else if (device > cm_id_priv->id.device)
node = node->rb_right;
- else if (service_id < cm_id_priv->id.service_id)
+ else if (be64_lt(service_id, cm_id_priv->id.service_id))
node = node->rb_left;
- else if (service_id > cm_id_priv->id.service_id)
+ else if (be64_gt(service_id, cm_id_priv->id.service_id))
node = node->rb_right;
else if (data_cmp < 0)
node = node->rb_left;
@@ -552,13 +577,13 @@
parent = *link;
cur_timewait_info = rb_entry(parent, struct cm_timewait_info,
remote_id_node);
- if (remote_id < cur_timewait_info->work.remote_id)
+ if (be32_lt(remote_id, cur_timewait_info->work.remote_id))
link = &(*link)->rb_left;
- else if (remote_id > cur_timewait_info->work.remote_id)
+ else if (be32_gt(remote_id, cur_timewait_info->work.remote_id))
link = &(*link)->rb_right;
- else if (remote_ca_guid < cur_timewait_info->remote_ca_guid)
+ else if (be64_lt(remote_ca_guid, cur_timewait_info->remote_ca_guid))
link = &(*link)->rb_left;
- else if (remote_ca_guid > cur_timewait_info->remote_ca_guid)
+ else if (be64_gt(remote_ca_guid, cur_timewait_info->remote_ca_guid))
link = &(*link)->rb_right;
else
return cur_timewait_info;
@@ -578,13 +603,13 @@
while (node) {
timewait_info = rb_entry(node, struct cm_timewait_info,
remote_id_node);
- if (remote_id < timewait_info->work.remote_id)
+ if (be32_lt(remote_id, timewait_info->work.remote_id))
node = node->rb_left;
- else if (remote_id > timewait_info->work.remote_id)
+ else if (be32_gt(remote_id, timewait_info->work.remote_id))
node = node->rb_right;
- else if (remote_ca_guid < timewait_info->remote_ca_guid)
+ else if (be64_lt(remote_ca_guid, timewait_info->remote_ca_guid))
node = node->rb_left;
- else if (remote_ca_guid > timewait_info->remote_ca_guid)
+ else if (be64_gt(remote_ca_guid, timewait_info->remote_ca_guid))
node = node->rb_right;
else
return timewait_info;
@@ -605,13 +630,13 @@
parent = *link;
cur_timewait_info = rb_entry(parent, struct cm_timewait_info,
remote_qp_node);
- if (remote_qpn < cur_timewait_info->remote_qpn)
+ if (be32_lt(remote_qpn, cur_timewait_info->remote_qpn))
link = &(*link)->rb_left;
- else if (remote_qpn > cur_timewait_info->remote_qpn)
+ else if (be32_gt(remote_qpn, cur_timewait_info->remote_qpn))
link = &(*link)->rb_right;
- else if (remote_ca_guid < cur_timewait_info->remote_ca_guid)
+ else if (be64_lt(remote_ca_guid, cur_timewait_info->remote_ca_guid))
link = &(*link)->rb_left;
- else if (remote_ca_guid > cur_timewait_info->remote_ca_guid)
+ else if (be64_gt(remote_ca_guid, cur_timewait_info->remote_ca_guid))
link = &(*link)->rb_right;
else
return cur_timewait_info;
@@ -635,9 +660,9 @@
parent = *link;
cur_cm_id_priv = rb_entry(parent, struct cm_id_private,
sidr_id_node);
- if (remote_id < cur_cm_id_priv->id.remote_id)
+ if (be32_lt(remote_id, cur_cm_id_priv->id.remote_id))
link = &(*link)->rb_left;
- else if (remote_id > cur_cm_id_priv->id.remote_id)
+ else if (be32_gt(remote_id, cur_cm_id_priv->id.remote_id))
link = &(*link)->rb_right;
else {
int cmp;
@@ -2848,7 +2873,7 @@
cm_format_mad_hdr(&sidr_req_msg->hdr, CM_SIDR_REQ_ATTR_ID,
cm_form_tid(cm_id_priv, CM_MSG_SEQUENCE_SIDR));
sidr_req_msg->request_id = cm_id_priv->id.local_id;
- sidr_req_msg->pkey = cpu_to_be16(param->path->pkey);
+ sidr_req_msg->pkey = param->path->pkey;
sidr_req_msg->service_id = param->service_id;
if (param->private_data && param->private_data_len)
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index d81c156..671f137 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -1289,7 +1289,7 @@
new_cm_id = rdma_create_id(listen_id->id.event_handler,
listen_id->id.context,
RDMA_PS_TCP);
- if (!new_cm_id) {
+ if (IS_ERR(new_cm_id)) {
ret = -ENOMEM;
goto out;
}
diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c
index 06d502c..1286dc1 100644
--- a/drivers/infiniband/core/fmr_pool.c
+++ b/drivers/infiniband/core/fmr_pool.c
@@ -158,8 +158,7 @@
#endif
}
- list_splice(&pool->dirty_list, &unmap_list);
- INIT_LIST_HEAD(&pool->dirty_list);
+ list_splice_init(&pool->dirty_list, &unmap_list);
pool->dirty_len = 0;
spin_unlock_irq(&pool->pool_lock);
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index 15937eb..ca4cf3a 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -614,7 +614,7 @@
if (!ctx->cm_id->device)
goto out;
- resp.node_guid = ctx->cm_id->device->node_guid;
+ resp.node_guid = (__force __u64) ctx->cm_id->device->node_guid;
resp.port_num = ctx->cm_id->port_num;
switch (rdma_node_get_transport(ctx->cm_id->device->node_type)) {
case RDMA_TRANSPORT_IB:
diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h
index c75eb6c..2cad8b4 100644
--- a/drivers/infiniband/core/uverbs.h
+++ b/drivers/infiniband/core/uverbs.h
@@ -81,13 +81,13 @@
struct ib_uverbs_event_file {
struct kref ref;
- struct file *file;
struct ib_uverbs_file *uverbs_file;
spinlock_t lock;
- int is_async;
wait_queue_head_t poll_wait;
struct fasync_struct *async_queue;
struct list_head event_list;
+ int is_async;
+ int is_closed;
};
struct ib_uverbs_file {
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index 495c803..2c3bff5 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -1065,6 +1065,7 @@
attr.srq = srq;
attr.sq_sig_type = cmd.sq_sig_all ? IB_SIGNAL_ALL_WR : IB_SIGNAL_REQ_WR;
attr.qp_type = cmd.qp_type;
+ attr.create_flags = 0;
attr.cap.max_send_wr = cmd.max_send_wr;
attr.cap.max_recv_wr = cmd.max_recv_wr;
@@ -1462,7 +1463,6 @@
next->num_sge = user_wr->num_sge;
next->opcode = user_wr->opcode;
next->send_flags = user_wr->send_flags;
- next->imm_data = (__be32 __force) user_wr->imm_data;
if (is_ud) {
next->wr.ud.ah = idr_read_ah(user_wr->wr.ud.ah,
@@ -1475,14 +1475,24 @@
next->wr.ud.remote_qkey = user_wr->wr.ud.remote_qkey;
} else {
switch (next->opcode) {
- case IB_WR_RDMA_WRITE:
case IB_WR_RDMA_WRITE_WITH_IMM:
+ next->ex.imm_data =
+ (__be32 __force) user_wr->ex.imm_data;
+ case IB_WR_RDMA_WRITE:
case IB_WR_RDMA_READ:
next->wr.rdma.remote_addr =
user_wr->wr.rdma.remote_addr;
next->wr.rdma.rkey =
user_wr->wr.rdma.rkey;
break;
+ case IB_WR_SEND_WITH_IMM:
+ next->ex.imm_data =
+ (__be32 __force) user_wr->ex.imm_data;
+ break;
+ case IB_WR_SEND_WITH_INV:
+ next->ex.invalidate_rkey =
+ user_wr->ex.invalidate_rkey;
+ break;
case IB_WR_ATOMIC_CMP_AND_SWP:
case IB_WR_ATOMIC_FETCH_AND_ADD:
next->wr.atomic.remote_addr =
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 7c2ac39..f49f946 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -352,7 +352,7 @@
struct ib_uverbs_event *entry, *tmp;
spin_lock_irq(&file->lock);
- file->file = NULL;
+ file->is_closed = 1;
list_for_each_entry_safe(entry, tmp, &file->event_list, list) {
if (entry->counter)
list_del(&entry->obj_list);
@@ -390,7 +390,7 @@
return;
spin_lock_irqsave(&file->lock, flags);
- if (!file->file) {
+ if (file->is_closed) {
spin_unlock_irqrestore(&file->lock, flags);
return;
}
@@ -423,7 +423,7 @@
unsigned long flags;
spin_lock_irqsave(&file->async_file->lock, flags);
- if (!file->async_file->file) {
+ if (!file->async_file->is_closed) {
spin_unlock_irqrestore(&file->async_file->lock, flags);
return;
}
@@ -509,6 +509,7 @@
ev_file->uverbs_file = uverbs_file;
ev_file->async_queue = NULL;
ev_file->is_async = is_async;
+ ev_file->is_closed = 0;
*fd = get_unused_fd();
if (*fd < 0) {
@@ -516,25 +517,18 @@
goto err;
}
- filp = get_empty_filp();
- if (!filp) {
- ret = -ENFILE;
- goto err_fd;
- }
-
- ev_file->file = filp;
-
/*
* fops_get() can't fail here, because we're coming from a
* system call on a uverbs file, which will already have a
* module reference.
*/
- filp->f_op = fops_get(&uverbs_event_fops);
- filp->f_path.mnt = mntget(uverbs_event_mnt);
- filp->f_path.dentry = dget(uverbs_event_mnt->mnt_root);
- filp->f_mapping = filp->f_path.dentry->d_inode->i_mapping;
- filp->f_flags = O_RDONLY;
- filp->f_mode = FMODE_READ;
+ filp = alloc_file(uverbs_event_mnt, dget(uverbs_event_mnt->mnt_root),
+ FMODE_READ, fops_get(&uverbs_event_fops));
+ if (!filp) {
+ ret = -ENFILE;
+ goto err_fd;
+ }
+
filp->private_data = ev_file;
return filp;
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 86ed8af..0504208 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -248,7 +248,9 @@
struct ib_srq_attr *srq_attr,
enum ib_srq_attr_mask srq_attr_mask)
{
- return srq->device->modify_srq(srq, srq_attr, srq_attr_mask, NULL);
+ return srq->device->modify_srq ?
+ srq->device->modify_srq(srq, srq_attr, srq_attr_mask, NULL) :
+ -ENOSYS;
}
EXPORT_SYMBOL(ib_modify_srq);
@@ -628,6 +630,13 @@
}
EXPORT_SYMBOL(ib_create_cq);
+int ib_modify_cq(struct ib_cq *cq, u16 cq_count, u16 cq_period)
+{
+ return cq->device->modify_cq ?
+ cq->device->modify_cq(cq, cq_count, cq_period) : -ENOSYS;
+}
+EXPORT_SYMBOL(ib_modify_cq);
+
int ib_destroy_cq(struct ib_cq *cq)
{
if (atomic_read(&cq->usecnt))
@@ -672,6 +681,9 @@
{
struct ib_mr *mr;
+ if (!pd->device->reg_phys_mr)
+ return ERR_PTR(-ENOSYS);
+
mr = pd->device->reg_phys_mr(pd, phys_buf_array, num_phys_buf,
mr_access_flags, iova_start);
diff --git a/drivers/infiniband/hw/amso1100/c2.c b/drivers/infiniband/hw/amso1100/c2.c
index f283a9f..113f3c0 100644
--- a/drivers/infiniband/hw/amso1100/c2.c
+++ b/drivers/infiniband/hw/amso1100/c2.c
@@ -130,10 +130,10 @@
tx_desc->status = 0;
/* Set TXP_HTXD_UNINIT */
- __raw_writeq(cpu_to_be64(0x1122334455667788ULL),
+ __raw_writeq((__force u64) cpu_to_be64(0x1122334455667788ULL),
(void __iomem *) txp_desc + C2_TXP_ADDR);
__raw_writew(0, (void __iomem *) txp_desc + C2_TXP_LEN);
- __raw_writew(cpu_to_be16(TXP_HTXD_UNINIT),
+ __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_UNINIT),
(void __iomem *) txp_desc + C2_TXP_FLAGS);
elem->skb = NULL;
@@ -179,13 +179,13 @@
rx_desc->status = 0;
/* Set RXP_HRXD_UNINIT */
- __raw_writew(cpu_to_be16(RXP_HRXD_OK),
+ __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_OK),
(void __iomem *) rxp_desc + C2_RXP_STATUS);
__raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_COUNT);
__raw_writew(0, (void __iomem *) rxp_desc + C2_RXP_LEN);
- __raw_writeq(cpu_to_be64(0x99aabbccddeeffULL),
+ __raw_writeq((__force u64) cpu_to_be64(0x99aabbccddeeffULL),
(void __iomem *) rxp_desc + C2_RXP_ADDR);
- __raw_writew(cpu_to_be16(RXP_HRXD_UNINIT),
+ __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_UNINIT),
(void __iomem *) rxp_desc + C2_RXP_FLAGS);
elem->skb = NULL;
@@ -239,10 +239,11 @@
rxp_hdr->flags = RXP_HRXD_READY;
__raw_writew(0, elem->hw_desc + C2_RXP_STATUS);
- __raw_writew(cpu_to_be16((u16) maplen - sizeof(*rxp_hdr)),
+ __raw_writew((__force u16) cpu_to_be16((u16) maplen - sizeof(*rxp_hdr)),
elem->hw_desc + C2_RXP_LEN);
- __raw_writeq(cpu_to_be64(mapaddr), elem->hw_desc + C2_RXP_ADDR);
- __raw_writew(cpu_to_be16(RXP_HRXD_READY), elem->hw_desc + C2_RXP_FLAGS);
+ __raw_writeq((__force u64) cpu_to_be64(mapaddr), elem->hw_desc + C2_RXP_ADDR);
+ __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY),
+ elem->hw_desc + C2_RXP_FLAGS);
elem->skb = skb;
elem->mapaddr = mapaddr;
@@ -290,9 +291,9 @@
__raw_writew(0, elem->hw_desc + C2_RXP_STATUS);
__raw_writew(0, elem->hw_desc + C2_RXP_COUNT);
__raw_writew(0, elem->hw_desc + C2_RXP_LEN);
- __raw_writeq(cpu_to_be64(0x99aabbccddeeffULL),
+ __raw_writeq((__force u64) cpu_to_be64(0x99aabbccddeeffULL),
elem->hw_desc + C2_RXP_ADDR);
- __raw_writew(cpu_to_be16(RXP_HRXD_UNINIT),
+ __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_UNINIT),
elem->hw_desc + C2_RXP_FLAGS);
if (elem->skb) {
@@ -346,16 +347,16 @@
elem->hw_desc + C2_TXP_LEN);
__raw_writeq(0,
elem->hw_desc + C2_TXP_ADDR);
- __raw_writew(cpu_to_be16(TXP_HTXD_DONE),
+ __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_DONE),
elem->hw_desc + C2_TXP_FLAGS);
c2_port->netstats.tx_dropped++;
break;
} else {
__raw_writew(0,
elem->hw_desc + C2_TXP_LEN);
- __raw_writeq(cpu_to_be64(0x1122334455667788ULL),
+ __raw_writeq((__force u64) cpu_to_be64(0x1122334455667788ULL),
elem->hw_desc + C2_TXP_ADDR);
- __raw_writew(cpu_to_be16(TXP_HTXD_UNINIT),
+ __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_UNINIT),
elem->hw_desc + C2_TXP_FLAGS);
}
@@ -390,7 +391,7 @@
for (elem = tx_ring->to_clean; elem != tx_ring->to_use;
elem = elem->next) {
txp_htxd.flags =
- be16_to_cpu(readw(elem->hw_desc + C2_TXP_FLAGS));
+ be16_to_cpu((__force __be16) readw(elem->hw_desc + C2_TXP_FLAGS));
if (txp_htxd.flags != TXP_HTXD_DONE)
break;
@@ -398,7 +399,7 @@
if (netif_msg_tx_done(c2_port)) {
/* PCI reads are expensive in fast path */
txp_htxd.len =
- be16_to_cpu(readw(elem->hw_desc + C2_TXP_LEN));
+ be16_to_cpu((__force __be16) readw(elem->hw_desc + C2_TXP_LEN));
pr_debug("%s: tx done slot %3Zu status 0x%x len "
"%5u bytes\n",
netdev->name, elem - tx_ring->start,
@@ -448,10 +449,12 @@
/* Write the descriptor to the adapter's rx ring */
__raw_writew(0, elem->hw_desc + C2_RXP_STATUS);
__raw_writew(0, elem->hw_desc + C2_RXP_COUNT);
- __raw_writew(cpu_to_be16((u16) elem->maplen - sizeof(*rxp_hdr)),
+ __raw_writew((__force u16) cpu_to_be16((u16) elem->maplen - sizeof(*rxp_hdr)),
elem->hw_desc + C2_RXP_LEN);
- __raw_writeq(cpu_to_be64(elem->mapaddr), elem->hw_desc + C2_RXP_ADDR);
- __raw_writew(cpu_to_be16(RXP_HRXD_READY), elem->hw_desc + C2_RXP_FLAGS);
+ __raw_writeq((__force u64) cpu_to_be64(elem->mapaddr),
+ elem->hw_desc + C2_RXP_ADDR);
+ __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY),
+ elem->hw_desc + C2_RXP_FLAGS);
pr_debug("packet dropped\n");
c2_port->netstats.rx_dropped++;
@@ -653,7 +656,7 @@
i++, elem++) {
rxp_hdr = (struct c2_rxp_hdr *) elem->skb->data;
rxp_hdr->flags = 0;
- __raw_writew(cpu_to_be16(RXP_HRXD_READY),
+ __raw_writew((__force u16) cpu_to_be16(RXP_HRXD_READY),
elem->hw_desc + C2_RXP_FLAGS);
}
@@ -787,9 +790,12 @@
elem->maplen = maplen;
/* Tell HW to xmit */
- __raw_writeq(cpu_to_be64(mapaddr), elem->hw_desc + C2_TXP_ADDR);
- __raw_writew(cpu_to_be16(maplen), elem->hw_desc + C2_TXP_LEN);
- __raw_writew(cpu_to_be16(TXP_HTXD_READY), elem->hw_desc + C2_TXP_FLAGS);
+ __raw_writeq((__force u64) cpu_to_be64(mapaddr),
+ elem->hw_desc + C2_TXP_ADDR);
+ __raw_writew((__force u16) cpu_to_be16(maplen),
+ elem->hw_desc + C2_TXP_LEN);
+ __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_READY),
+ elem->hw_desc + C2_TXP_FLAGS);
c2_port->netstats.tx_packets++;
c2_port->netstats.tx_bytes += maplen;
@@ -810,11 +816,11 @@
elem->maplen = maplen;
/* Tell HW to xmit */
- __raw_writeq(cpu_to_be64(mapaddr),
+ __raw_writeq((__force u64) cpu_to_be64(mapaddr),
elem->hw_desc + C2_TXP_ADDR);
- __raw_writew(cpu_to_be16(maplen),
+ __raw_writew((__force u16) cpu_to_be16(maplen),
elem->hw_desc + C2_TXP_LEN);
- __raw_writew(cpu_to_be16(TXP_HTXD_READY),
+ __raw_writew((__force u16) cpu_to_be16(TXP_HTXD_READY),
elem->hw_desc + C2_TXP_FLAGS);
c2_port->netstats.tx_packets++;
@@ -1005,7 +1011,7 @@
/* Remap the adapter PCI registers in BAR4 */
mmio_regs = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET,
sizeof(struct c2_adapter_pci_regs));
- if (mmio_regs == 0UL) {
+ if (!mmio_regs) {
printk(KERN_ERR PFX
"Unable to remap adapter PCI registers in BAR4\n");
ret = -EIO;
@@ -1029,10 +1035,10 @@
}
/* Validate the adapter version */
- if (be32_to_cpu(readl(mmio_regs + C2_REGS_VERS)) != C2_VERSION) {
+ if (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_VERS)) != C2_VERSION) {
printk(KERN_ERR PFX "Version mismatch "
"[fw=%u, c2=%u], Adapter not claimed\n",
- be32_to_cpu(readl(mmio_regs + C2_REGS_VERS)),
+ be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_VERS)),
C2_VERSION);
ret = -EINVAL;
iounmap(mmio_regs);
@@ -1040,12 +1046,12 @@
}
/* Validate the adapter IVN */
- if (be32_to_cpu(readl(mmio_regs + C2_REGS_IVN)) != C2_IVN) {
+ if (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_IVN)) != C2_IVN) {
printk(KERN_ERR PFX "Downlevel FIrmware level. You should be using "
"the OpenIB device support kit. "
"[fw=0x%x, c2=0x%x], Adapter not claimed\n",
- be32_to_cpu(readl(mmio_regs + C2_REGS_IVN)),
- C2_IVN);
+ be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_IVN)),
+ C2_IVN);
ret = -EINVAL;
iounmap(mmio_regs);
goto bail2;
@@ -1068,7 +1074,7 @@
/* Get the last RX index */
c2dev->cur_rx =
- (be32_to_cpu(readl(mmio_regs + C2_REGS_HRX_CUR)) -
+ (be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_HRX_CUR)) -
0xffffc000) / sizeof(struct c2_rxp_desc);
/* Request an interrupt line for the driver */
@@ -1090,7 +1096,7 @@
}
/* Save off the actual size prior to unmapping mmio_regs */
- kva_map_size = be32_to_cpu(readl(mmio_regs + C2_REGS_PCI_WINSIZE));
+ kva_map_size = be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_PCI_WINSIZE));
/* Unmap the adapter PCI registers in BAR4 */
iounmap(mmio_regs);
@@ -1109,7 +1115,7 @@
/* Remap the adapter HRXDQ PA space to kernel VA space */
c2dev->mmio_rxp_ring = ioremap_nocache(reg4_start + C2_RXP_HRXDQ_OFFSET,
C2_RXP_HRXDQ_SIZE);
- if (c2dev->mmio_rxp_ring == 0UL) {
+ if (!c2dev->mmio_rxp_ring) {
printk(KERN_ERR PFX "Unable to remap MMIO HRXDQ region\n");
ret = -EIO;
goto bail6;
@@ -1118,7 +1124,7 @@
/* Remap the adapter HTXDQ PA space to kernel VA space */
c2dev->mmio_txp_ring = ioremap_nocache(reg4_start + C2_TXP_HTXDQ_OFFSET,
C2_TXP_HTXDQ_SIZE);
- if (c2dev->mmio_txp_ring == 0UL) {
+ if (!c2dev->mmio_txp_ring) {
printk(KERN_ERR PFX "Unable to remap MMIO HTXDQ region\n");
ret = -EIO;
goto bail7;
@@ -1129,7 +1135,7 @@
/* Remap the PCI registers in adapter BAR0 to kernel VA space */
c2dev->regs = ioremap_nocache(reg0_start, reg0_len);
- if (c2dev->regs == 0UL) {
+ if (!c2dev->regs) {
printk(KERN_ERR PFX "Unable to remap BAR0\n");
ret = -EIO;
goto bail8;
@@ -1139,7 +1145,7 @@
c2dev->pa = reg4_start + C2_PCI_REGS_OFFSET;
c2dev->kva = ioremap_nocache(reg4_start + C2_PCI_REGS_OFFSET,
kva_map_size);
- if (c2dev->kva == 0UL) {
+ if (!c2dev->kva) {
printk(KERN_ERR PFX "Unable to remap BAR4\n");
ret = -EIO;
goto bail9;
diff --git a/drivers/infiniband/hw/amso1100/c2.h b/drivers/infiniband/hw/amso1100/c2.h
index fa58200..ed38ab8 100644
--- a/drivers/infiniband/hw/amso1100/c2.h
+++ b/drivers/infiniband/hw/amso1100/c2.h
@@ -346,7 +346,7 @@
// spinlock_t aeq_lock;
// spinlock_t rnic_lock;
- u16 *hint_count;
+ __be16 *hint_count;
dma_addr_t hint_count_dma;
u16 hints_read;
@@ -425,10 +425,10 @@
#endif
#define C2_SET_CUR_RX(c2dev, cur_rx) \
- __raw_writel(cpu_to_be32(cur_rx), c2dev->mmio_txp_ring + 4092)
+ __raw_writel((__force u32) cpu_to_be32(cur_rx), c2dev->mmio_txp_ring + 4092)
#define C2_GET_CUR_RX(c2dev) \
- be32_to_cpu(readl(c2dev->mmio_txp_ring + 4092))
+ be32_to_cpu((__force __be32) readl(c2dev->mmio_txp_ring + 4092))
static inline struct c2_dev *to_c2dev(struct ib_device *ibdev)
{
@@ -485,8 +485,8 @@
extern int c2_rnic_init(struct c2_dev *c2dev);
extern void c2_rnic_term(struct c2_dev *c2dev);
extern void c2_rnic_interrupt(struct c2_dev *c2dev);
-extern int c2_del_addr(struct c2_dev *c2dev, u32 inaddr, u32 inmask);
-extern int c2_add_addr(struct c2_dev *c2dev, u32 inaddr, u32 inmask);
+extern int c2_del_addr(struct c2_dev *c2dev, __be32 inaddr, __be32 inmask);
+extern int c2_add_addr(struct c2_dev *c2dev, __be32 inaddr, __be32 inmask);
/* QPs */
extern int c2_alloc_qp(struct c2_dev *c2dev, struct c2_pd *pd,
@@ -545,7 +545,7 @@
extern int c2_init_mqsp_pool(struct c2_dev *c2dev, gfp_t gfp_mask,
struct sp_chunk **root);
extern void c2_free_mqsp_pool(struct c2_dev *c2dev, struct sp_chunk *root);
-extern u16 *c2_alloc_mqsp(struct c2_dev *c2dev, struct sp_chunk *head,
- dma_addr_t *dma_addr, gfp_t gfp_mask);
-extern void c2_free_mqsp(u16 * mqsp);
+extern __be16 *c2_alloc_mqsp(struct c2_dev *c2dev, struct sp_chunk *head,
+ dma_addr_t *dma_addr, gfp_t gfp_mask);
+extern void c2_free_mqsp(__be16* mqsp);
#endif
diff --git a/drivers/infiniband/hw/amso1100/c2_ae.c b/drivers/infiniband/hw/amso1100/c2_ae.c
index a31439b..62af742 100644
--- a/drivers/infiniband/hw/amso1100/c2_ae.c
+++ b/drivers/infiniband/hw/amso1100/c2_ae.c
@@ -61,7 +61,7 @@
default:
printk(KERN_ERR PFX
"%s - Unable to convert CM status: %d\n",
- __FUNCTION__, c2_status);
+ __func__, c2_status);
return -EIO;
}
}
@@ -193,9 +193,9 @@
pr_debug("%s: event = %s, user_context=%llx, "
"resource_type=%x, "
"resource=%x, qp_state=%s\n",
- __FUNCTION__,
+ __func__,
to_event_str(event_id),
- (unsigned long long) be64_to_cpu(wr->ae.ae_generic.user_context),
+ (unsigned long long) wr->ae.ae_generic.user_context,
be32_to_cpu(wr->ae.ae_generic.resource_type),
be32_to_cpu(wr->ae.ae_generic.resource),
to_qp_state_str(be32_to_cpu(wr->ae.ae_generic.qp_state)));
@@ -259,7 +259,7 @@
BUG_ON(1);
pr_debug("%s:%d Unexpected event_id=%d on QP=%p, "
"CM_ID=%p\n",
- __FUNCTION__, __LINE__,
+ __func__, __LINE__,
event_id, qp, cm_id);
break;
}
@@ -276,7 +276,7 @@
pr_debug("C2_RES_IND_EP event_id=%d\n", event_id);
if (event_id != CCAE_CONNECTION_REQUEST) {
pr_debug("%s: Invalid event_id: %d\n",
- __FUNCTION__, event_id);
+ __func__, event_id);
break;
}
cm_event.event = IW_CM_EVENT_CONNECT_REQUEST;
diff --git a/drivers/infiniband/hw/amso1100/c2_alloc.c b/drivers/infiniband/hw/amso1100/c2_alloc.c
index 0315f99..e911016 100644
--- a/drivers/infiniband/hw/amso1100/c2_alloc.c
+++ b/drivers/infiniband/hw/amso1100/c2_alloc.c
@@ -87,8 +87,8 @@
}
}
-u16 *c2_alloc_mqsp(struct c2_dev *c2dev, struct sp_chunk *head,
- dma_addr_t *dma_addr, gfp_t gfp_mask)
+__be16 *c2_alloc_mqsp(struct c2_dev *c2dev, struct sp_chunk *head,
+ dma_addr_t *dma_addr, gfp_t gfp_mask)
{
u16 mqsp;
@@ -113,14 +113,14 @@
*dma_addr = head->dma_addr +
((unsigned long) &(head->shared_ptr[mqsp]) -
(unsigned long) head);
- pr_debug("%s addr %p dma_addr %llx\n", __FUNCTION__,
+ pr_debug("%s addr %p dma_addr %llx\n", __func__,
&(head->shared_ptr[mqsp]), (unsigned long long) *dma_addr);
- return &(head->shared_ptr[mqsp]);
+ return (__force __be16 *) &(head->shared_ptr[mqsp]);
}
return NULL;
}
-void c2_free_mqsp(u16 * mqsp)
+void c2_free_mqsp(__be16 *mqsp)
{
struct sp_chunk *head;
u16 idx;
@@ -129,7 +129,7 @@
head = (struct sp_chunk *) ((unsigned long) mqsp & PAGE_MASK);
/* Link head to new mqsp */
- *mqsp = head->head;
+ *mqsp = (__force __be16) head->head;
/* Compute the shared_ptr index */
idx = ((unsigned long) mqsp & ~PAGE_MASK) >> 1;
diff --git a/drivers/infiniband/hw/amso1100/c2_cq.c b/drivers/infiniband/hw/amso1100/c2_cq.c
index d2b3366..bb17cce 100644
--- a/drivers/infiniband/hw/amso1100/c2_cq.c
+++ b/drivers/infiniband/hw/amso1100/c2_cq.c
@@ -422,8 +422,8 @@
goto bail1;
reply = (struct c2wr_cq_destroy_rep *) (unsigned long) (vq_req->reply_msg);
-
- vq_repbuf_free(c2dev, reply);
+ if (reply)
+ vq_repbuf_free(c2dev, reply);
bail1:
vq_req_free(c2dev, vq_req);
bail0:
diff --git a/drivers/infiniband/hw/amso1100/c2_intr.c b/drivers/infiniband/hw/amso1100/c2_intr.c
index 0d0bc33..3b50954 100644
--- a/drivers/infiniband/hw/amso1100/c2_intr.c
+++ b/drivers/infiniband/hw/amso1100/c2_intr.c
@@ -174,7 +174,11 @@
return;
}
- err = c2_errno(reply_msg);
+ if (reply_msg)
+ err = c2_errno(reply_msg);
+ else
+ err = -ENOMEM;
+
if (!err) switch (req->event) {
case IW_CM_EVENT_ESTABLISHED:
c2_set_qp_state(req->qp,
diff --git a/drivers/infiniband/hw/amso1100/c2_mm.c b/drivers/infiniband/hw/amso1100/c2_mm.c
index 1e4f464..b506fe2 100644
--- a/drivers/infiniband/hw/amso1100/c2_mm.c
+++ b/drivers/infiniband/hw/amso1100/c2_mm.c
@@ -45,7 +45,7 @@
* Reply buffer _is_ freed by this function.
*/
static int
-send_pbl_messages(struct c2_dev *c2dev, u32 stag_index,
+send_pbl_messages(struct c2_dev *c2dev, __be32 stag_index,
unsigned long va, u32 pbl_depth,
struct c2_vq_req *vq_req, int pbl_type)
{
diff --git a/drivers/infiniband/hw/amso1100/c2_mq.c b/drivers/infiniband/hw/amso1100/c2_mq.c
index b88a755..0cddc49 100644
--- a/drivers/infiniband/hw/amso1100/c2_mq.c
+++ b/drivers/infiniband/hw/amso1100/c2_mq.c
@@ -64,7 +64,7 @@
q->priv = (q->priv + 1) % q->q_size;
q->hint_count++;
/* Update peer's offset. */
- __raw_writew(cpu_to_be16(q->priv), &q->peer->shared);
+ __raw_writew((__force u16) cpu_to_be16(q->priv), &q->peer->shared);
}
}
@@ -105,7 +105,7 @@
#endif
q->priv = (q->priv + 1) % q->q_size;
/* Update peer's offset. */
- __raw_writew(cpu_to_be16(q->priv), &q->peer->shared);
+ __raw_writew((__force u16) cpu_to_be16(q->priv), &q->peer->shared);
}
}
diff --git a/drivers/infiniband/hw/amso1100/c2_mq.h b/drivers/infiniband/hw/amso1100/c2_mq.h
index 9185bbb..acede00 100644
--- a/drivers/infiniband/hw/amso1100/c2_mq.h
+++ b/drivers/infiniband/hw/amso1100/c2_mq.h
@@ -75,7 +75,7 @@
u16 hint_count;
u16 priv;
struct c2_mq_shared __iomem *peer;
- u16 *shared;
+ __be16 *shared;
dma_addr_t shared_dma;
u32 q_size;
u32 msg_size;
diff --git a/drivers/infiniband/hw/amso1100/c2_provider.c b/drivers/infiniband/hw/amso1100/c2_provider.c
index 7a6cece..e10d27a 100644
--- a/drivers/infiniband/hw/amso1100/c2_provider.c
+++ b/drivers/infiniband/hw/amso1100/c2_provider.c
@@ -67,7 +67,7 @@
{
struct c2_dev *c2dev = to_c2dev(ibdev);
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
*props = c2dev->props;
return 0;
@@ -76,7 +76,7 @@
static int c2_query_port(struct ib_device *ibdev,
u8 port, struct ib_port_attr *props)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
props->max_mtu = IB_MTU_4096;
props->lid = 0;
@@ -102,14 +102,14 @@
u8 port, int port_modify_mask,
struct ib_port_modify *props)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return 0;
}
static int c2_query_pkey(struct ib_device *ibdev,
u8 port, u16 index, u16 * pkey)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
*pkey = 0;
return 0;
}
@@ -119,7 +119,7 @@
{
struct c2_dev *c2dev = to_c2dev(ibdev);
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
memset(&(gid->raw[0]), 0, sizeof(gid->raw));
memcpy(&(gid->raw[0]), c2dev->pseudo_netdev->dev_addr, 6);
@@ -134,7 +134,7 @@
{
struct c2_ucontext *context;
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
context = kmalloc(sizeof(*context), GFP_KERNEL);
if (!context)
return ERR_PTR(-ENOMEM);
@@ -144,14 +144,14 @@
static int c2_dealloc_ucontext(struct ib_ucontext *context)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
kfree(context);
return 0;
}
static int c2_mmap_uar(struct ib_ucontext *context, struct vm_area_struct *vma)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return -ENOSYS;
}
@@ -162,7 +162,7 @@
struct c2_pd *pd;
int err;
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
pd = kmalloc(sizeof(*pd), GFP_KERNEL);
if (!pd)
@@ -187,7 +187,7 @@
static int c2_dealloc_pd(struct ib_pd *pd)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
c2_pd_free(to_c2dev(pd->device), to_c2pd(pd));
kfree(pd);
@@ -196,13 +196,13 @@
static struct ib_ah *c2_ah_create(struct ib_pd *pd, struct ib_ah_attr *ah_attr)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return ERR_PTR(-ENOSYS);
}
static int c2_ah_destroy(struct ib_ah *ah)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return -ENOSYS;
}
@@ -230,7 +230,7 @@
qp = c2_find_qpn(c2dev, qpn);
pr_debug("%s Returning QP=%p for QPN=%d, device=%p, refcount=%d\n",
- __FUNCTION__, qp, qpn, device,
+ __func__, qp, qpn, device,
(qp?atomic_read(&qp->refcount):0));
return (qp?&qp->ibqp:NULL);
@@ -243,13 +243,16 @@
struct c2_qp *qp;
int err;
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
+
+ if (init_attr->create_flags)
+ return ERR_PTR(-EINVAL);
switch (init_attr->qp_type) {
case IB_QPT_RC:
qp = kzalloc(sizeof(*qp), GFP_KERNEL);
if (!qp) {
- pr_debug("%s: Unable to allocate QP\n", __FUNCTION__);
+ pr_debug("%s: Unable to allocate QP\n", __func__);
return ERR_PTR(-ENOMEM);
}
spin_lock_init(&qp->lock);
@@ -266,7 +269,7 @@
break;
default:
- pr_debug("%s: Invalid QP type: %d\n", __FUNCTION__,
+ pr_debug("%s: Invalid QP type: %d\n", __func__,
init_attr->qp_type);
return ERR_PTR(-EINVAL);
break;
@@ -285,7 +288,7 @@
struct c2_qp *qp = to_c2qp(ib_qp);
pr_debug("%s:%u qp=%p,qp->state=%d\n",
- __FUNCTION__, __LINE__,ib_qp,qp->state);
+ __func__, __LINE__, ib_qp, qp->state);
c2_free_qp(to_c2dev(ib_qp->device), qp);
kfree(qp);
return 0;
@@ -300,13 +303,13 @@
cq = kmalloc(sizeof(*cq), GFP_KERNEL);
if (!cq) {
- pr_debug("%s: Unable to allocate CQ\n", __FUNCTION__);
+ pr_debug("%s: Unable to allocate CQ\n", __func__);
return ERR_PTR(-ENOMEM);
}
err = c2_init_cq(to_c2dev(ibdev), entries, NULL, cq);
if (err) {
- pr_debug("%s: error initializing CQ\n", __FUNCTION__);
+ pr_debug("%s: error initializing CQ\n", __func__);
kfree(cq);
return ERR_PTR(err);
}
@@ -318,7 +321,7 @@
{
struct c2_cq *cq = to_c2cq(ib_cq);
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
c2_free_cq(to_c2dev(ib_cq->device), cq);
kfree(cq);
@@ -400,7 +403,7 @@
mr->umem = NULL;
pr_debug("%s - page shift %d, pbl_depth %d, total_len %u, "
"*iova_start %llx, first pa %llx, last pa %llx\n",
- __FUNCTION__, page_shift, pbl_depth, total_len,
+ __func__, page_shift, pbl_depth, total_len,
(unsigned long long) *iova_start,
(unsigned long long) page_list[0],
(unsigned long long) page_list[pbl_depth-1]);
@@ -422,7 +425,7 @@
struct ib_phys_buf bl;
u64 kva = 0;
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
/* AMSO1100 limit */
bl.size = 0xffffffff;
@@ -442,7 +445,7 @@
struct c2_pd *c2pd = to_c2pd(pd);
struct c2_mr *c2mr;
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
c2mr = kmalloc(sizeof(*c2mr), GFP_KERNEL);
if (!c2mr)
@@ -506,7 +509,7 @@
struct c2_mr *mr = to_c2mr(ib_mr);
int err;
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
err = c2_stag_dealloc(to_c2dev(ib_mr->device), ib_mr->lkey);
if (err)
@@ -523,14 +526,14 @@
static ssize_t show_rev(struct class_device *cdev, char *buf)
{
struct c2_dev *dev = container_of(cdev, struct c2_dev, ibdev.class_dev);
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return sprintf(buf, "%x\n", dev->props.hw_ver);
}
static ssize_t show_fw_ver(struct class_device *cdev, char *buf)
{
struct c2_dev *dev = container_of(cdev, struct c2_dev, ibdev.class_dev);
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return sprintf(buf, "%x.%x.%x\n",
(int) (dev->props.fw_ver >> 32),
(int) (dev->props.fw_ver >> 16) & 0xffff,
@@ -539,13 +542,13 @@
static ssize_t show_hca(struct class_device *cdev, char *buf)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return sprintf(buf, "AMSO1100\n");
}
static ssize_t show_board(struct class_device *cdev, char *buf)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return sprintf(buf, "%.*s\n", 32, "AMSO1100 Board ID");
}
@@ -575,13 +578,13 @@
static int c2_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return -ENOSYS;
}
static int c2_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return -ENOSYS;
}
@@ -592,13 +595,13 @@
struct ib_grh *in_grh,
struct ib_mad *in_mad, struct ib_mad *out_mad)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
return -ENOSYS;
}
static int c2_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *iw_param)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
/* Request a connection */
return c2_llp_connect(cm_id, iw_param);
@@ -606,7 +609,7 @@
static int c2_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *iw_param)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
/* Accept the new connection */
return c2_llp_accept(cm_id, iw_param);
@@ -616,7 +619,7 @@
{
int err;
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
err = c2_llp_reject(cm_id, pdata, pdata_len);
return err;
@@ -626,10 +629,10 @@
{
int err;
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
err = c2_llp_service_create(cm_id, backlog);
pr_debug("%s:%u err=%d\n",
- __FUNCTION__, __LINE__,
+ __func__, __LINE__,
err);
return err;
}
@@ -637,7 +640,7 @@
static int c2_service_destroy(struct iw_cm_id *cm_id)
{
int err;
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
err = c2_llp_service_destroy(cm_id);
@@ -743,7 +746,7 @@
netdev = alloc_netdev(sizeof(*netdev), name, setup);
if (!netdev) {
printk(KERN_ERR PFX "%s - etherdev alloc failed",
- __FUNCTION__);
+ __func__);
return NULL;
}
@@ -780,7 +783,7 @@
if (ret)
goto out2;
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
strlcpy(dev->ibdev.name, "amso%d", IB_DEVICE_NAME_MAX);
dev->ibdev.owner = THIS_MODULE;
dev->ibdev.uverbs_cmd_mask =
@@ -873,13 +876,13 @@
out2:
free_netdev(dev->pseudo_netdev);
out3:
- pr_debug("%s:%u ret=%d\n", __FUNCTION__, __LINE__, ret);
+ pr_debug("%s:%u ret=%d\n", __func__, __LINE__, ret);
return ret;
}
void c2_unregister_device(struct c2_dev *dev)
{
- pr_debug("%s:%u\n", __FUNCTION__, __LINE__);
+ pr_debug("%s:%u\n", __func__, __LINE__);
unregister_netdev(dev->pseudo_netdev);
free_netdev(dev->pseudo_netdev);
ib_unregister_device(&dev->ibdev);
diff --git a/drivers/infiniband/hw/amso1100/c2_qp.c b/drivers/infiniband/hw/amso1100/c2_qp.c
index 01d0786..a6d8944 100644
--- a/drivers/infiniband/hw/amso1100/c2_qp.c
+++ b/drivers/infiniband/hw/amso1100/c2_qp.c
@@ -121,7 +121,7 @@
int new_state = to_ib_state(c2_state);
pr_debug("%s: qp[%p] state modify %s --> %s\n",
- __FUNCTION__,
+ __func__,
qp,
to_ib_state_str(qp->state),
to_ib_state_str(new_state));
@@ -141,7 +141,7 @@
int err;
pr_debug("%s:%d qp=%p, %s --> %s\n",
- __FUNCTION__, __LINE__,
+ __func__, __LINE__,
qp,
to_ib_state_str(qp->state),
to_ib_state_str(attr->qp_state));
@@ -224,7 +224,7 @@
qp->state = next_state;
#ifdef DEBUG
else
- pr_debug("%s: c2_errno=%d\n", __FUNCTION__, err);
+ pr_debug("%s: c2_errno=%d\n", __func__, err);
#endif
/*
* If we're going to error and generating the event here, then
@@ -243,7 +243,7 @@
vq_req_free(c2dev, vq_req);
pr_debug("%s:%d qp=%p, cur_state=%s\n",
- __FUNCTION__, __LINE__,
+ __func__, __LINE__,
qp,
to_ib_state_str(qp->state));
return err;
@@ -811,16 +811,24 @@
switch (ib_wr->opcode) {
case IB_WR_SEND:
- if (ib_wr->send_flags & IB_SEND_SOLICITED) {
- c2_wr_set_id(&wr, C2_WR_TYPE_SEND_SE);
- msg_size = sizeof(struct c2wr_send_req);
+ case IB_WR_SEND_WITH_INV:
+ if (ib_wr->opcode == IB_WR_SEND) {
+ if (ib_wr->send_flags & IB_SEND_SOLICITED)
+ c2_wr_set_id(&wr, C2_WR_TYPE_SEND_SE);
+ else
+ c2_wr_set_id(&wr, C2_WR_TYPE_SEND);
+ wr.sqwr.send.remote_stag = 0;
} else {
- c2_wr_set_id(&wr, C2_WR_TYPE_SEND);
- msg_size = sizeof(struct c2wr_send_req);
+ if (ib_wr->send_flags & IB_SEND_SOLICITED)
+ c2_wr_set_id(&wr, C2_WR_TYPE_SEND_SE_INV);
+ else
+ c2_wr_set_id(&wr, C2_WR_TYPE_SEND_INV);
+ wr.sqwr.send.remote_stag =
+ cpu_to_be32(ib_wr->ex.invalidate_rkey);
}
- wr.sqwr.send.remote_stag = 0;
- msg_size += sizeof(struct c2_data_addr) * ib_wr->num_sge;
+ msg_size = sizeof(struct c2wr_send_req) +
+ sizeof(struct c2_data_addr) * ib_wr->num_sge;
if (ib_wr->num_sge > qp->send_sgl_depth) {
err = -EINVAL;
break;
diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c
index 1687c51..9a054c6 100644
--- a/drivers/infiniband/hw/amso1100/c2_rnic.c
+++ b/drivers/infiniband/hw/amso1100/c2_rnic.c
@@ -208,7 +208,7 @@
/*
* Add an IP address to the RNIC interface
*/
-int c2_add_addr(struct c2_dev *c2dev, u32 inaddr, u32 inmask)
+int c2_add_addr(struct c2_dev *c2dev, __be32 inaddr, __be32 inmask)
{
struct c2_vq_req *vq_req;
struct c2wr_rnic_setconfig_req *wr;
@@ -270,7 +270,7 @@
/*
* Delete an IP address from the RNIC interface
*/
-int c2_del_addr(struct c2_dev *c2dev, u32 inaddr, u32 inmask)
+int c2_del_addr(struct c2_dev *c2dev, __be32 inaddr, __be32 inmask)
{
struct c2_vq_req *vq_req;
struct c2wr_rnic_setconfig_req *wr;
@@ -455,7 +455,8 @@
IB_DEVICE_CURR_QP_STATE_MOD |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_ZERO_STAG |
- IB_DEVICE_SEND_W_INV | IB_DEVICE_MEM_WINDOW);
+ IB_DEVICE_MEM_WINDOW |
+ IB_DEVICE_SEND_W_INV);
/* Allocate the qptr_array */
c2dev->qptr_array = vmalloc(C2_MAX_CQS * sizeof(void *));
@@ -506,17 +507,17 @@
mmio_regs = c2dev->kva;
/* Initialize the Verbs Request Queue */
c2_mq_req_init(&c2dev->req_vq, 0,
- be32_to_cpu(readl(mmio_regs + C2_REGS_Q0_QSIZE)),
- be32_to_cpu(readl(mmio_regs + C2_REGS_Q0_MSGSIZE)),
+ be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_Q0_QSIZE)),
+ be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_Q0_MSGSIZE)),
mmio_regs +
- be32_to_cpu(readl(mmio_regs + C2_REGS_Q0_POOLSTART)),
+ be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_Q0_POOLSTART)),
mmio_regs +
- be32_to_cpu(readl(mmio_regs + C2_REGS_Q0_SHARED)),
+ be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_Q0_SHARED)),
C2_MQ_ADAPTER_TARGET);
/* Initialize the Verbs Reply Queue */
- qsize = be32_to_cpu(readl(mmio_regs + C2_REGS_Q1_QSIZE));
- msgsize = be32_to_cpu(readl(mmio_regs + C2_REGS_Q1_MSGSIZE));
+ qsize = be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_Q1_QSIZE));
+ msgsize = be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_Q1_MSGSIZE));
q1_pages = dma_alloc_coherent(&c2dev->pcidev->dev, qsize * msgsize,
&c2dev->rep_vq.host_dma, GFP_KERNEL);
if (!q1_pages) {
@@ -524,7 +525,7 @@
goto bail1;
}
pci_unmap_addr_set(&c2dev->rep_vq, mapping, c2dev->rep_vq.host_dma);
- pr_debug("%s rep_vq va %p dma %llx\n", __FUNCTION__, q1_pages,
+ pr_debug("%s rep_vq va %p dma %llx\n", __func__, q1_pages,
(unsigned long long) c2dev->rep_vq.host_dma);
c2_mq_rep_init(&c2dev->rep_vq,
1,
@@ -532,12 +533,12 @@
msgsize,
q1_pages,
mmio_regs +
- be32_to_cpu(readl(mmio_regs + C2_REGS_Q1_SHARED)),
+ be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_Q1_SHARED)),
C2_MQ_HOST_TARGET);
/* Initialize the Asynchronus Event Queue */
- qsize = be32_to_cpu(readl(mmio_regs + C2_REGS_Q2_QSIZE));
- msgsize = be32_to_cpu(readl(mmio_regs + C2_REGS_Q2_MSGSIZE));
+ qsize = be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_Q2_QSIZE));
+ msgsize = be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_Q2_MSGSIZE));
q2_pages = dma_alloc_coherent(&c2dev->pcidev->dev, qsize * msgsize,
&c2dev->aeq.host_dma, GFP_KERNEL);
if (!q2_pages) {
@@ -545,7 +546,7 @@
goto bail2;
}
pci_unmap_addr_set(&c2dev->aeq, mapping, c2dev->aeq.host_dma);
- pr_debug("%s aeq va %p dma %llx\n", __FUNCTION__, q2_pages,
+ pr_debug("%s aeq va %p dma %llx\n", __func__, q2_pages,
(unsigned long long) c2dev->aeq.host_dma);
c2_mq_rep_init(&c2dev->aeq,
2,
@@ -553,7 +554,7 @@
msgsize,
q2_pages,
mmio_regs +
- be32_to_cpu(readl(mmio_regs + C2_REGS_Q2_SHARED)),
+ be32_to_cpu((__force __be32) readl(mmio_regs + C2_REGS_Q2_SHARED)),
C2_MQ_HOST_TARGET);
/* Initialize the verbs request allocator */
diff --git a/drivers/infiniband/hw/amso1100/c2_vq.c b/drivers/infiniband/hw/amso1100/c2_vq.c
index cfdacb1..9ce7819b 100644
--- a/drivers/infiniband/hw/amso1100/c2_vq.c
+++ b/drivers/infiniband/hw/amso1100/c2_vq.c
@@ -197,7 +197,7 @@
*/
while (msg == NULL) {
pr_debug("%s:%d no available msg in VQ, waiting...\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
init_waitqueue_entry(&__wait, current);
add_wait_queue(&c2dev->req_vq_wo, &__wait);
spin_unlock(&c2dev->vqlock);
diff --git a/drivers/infiniband/hw/amso1100/c2_wr.h b/drivers/infiniband/hw/amso1100/c2_wr.h
index 3ec6c43..c65fbdd 100644
--- a/drivers/infiniband/hw/amso1100/c2_wr.h
+++ b/drivers/infiniband/hw/amso1100/c2_wr.h
@@ -180,8 +180,8 @@
};
struct c2_netaddr {
- u32 ip_addr;
- u32 netmask;
+ __be32 ip_addr;
+ __be32 netmask;
u32 mtu;
};
@@ -199,9 +199,9 @@
* A Scatter Gather Entry.
*/
struct c2_data_addr {
- u32 stag;
- u32 length;
- u64 to;
+ __be32 stag;
+ __be32 length;
+ __be64 to;
};
/*
@@ -274,7 +274,7 @@
* from the host to adapter by libccil, but we copy it anyway
* to make the memcpy to the adapter better aligned.
*/
- u32 wqe_count;
+ __be32 wqe_count;
/* Put these fields next so that later 32- and 64-bit
* quantities are naturally aligned.
@@ -316,8 +316,8 @@
struct c2wr_rnic_open_req {
struct c2wr_hdr hdr;
u64 user_context;
- u16 flags; /* See enum c2_rnic_flags */
- u16 port_num;
+ __be16 flags; /* See enum c2_rnic_flags */
+ __be16 port_num;
} __attribute__((packed));
struct c2wr_rnic_open_rep {
@@ -341,30 +341,30 @@
struct c2wr_rnic_query_rep {
struct c2wr_hdr hdr;
u64 user_context;
- u32 vendor_id;
- u32 part_number;
- u32 hw_version;
- u32 fw_ver_major;
- u32 fw_ver_minor;
- u32 fw_ver_patch;
+ __be32 vendor_id;
+ __be32 part_number;
+ __be32 hw_version;
+ __be32 fw_ver_major;
+ __be32 fw_ver_minor;
+ __be32 fw_ver_patch;
char fw_ver_build_str[WR_BUILD_STR_LEN];
- u32 max_qps;
- u32 max_qp_depth;
+ __be32 max_qps;
+ __be32 max_qp_depth;
u32 max_srq_depth;
u32 max_send_sgl_depth;
u32 max_rdma_sgl_depth;
- u32 max_cqs;
- u32 max_cq_depth;
+ __be32 max_cqs;
+ __be32 max_cq_depth;
u32 max_cq_event_handlers;
- u32 max_mrs;
+ __be32 max_mrs;
u32 max_pbl_depth;
- u32 max_pds;
- u32 max_global_ird;
+ __be32 max_pds;
+ __be32 max_global_ird;
u32 max_global_ord;
- u32 max_qp_ird;
- u32 max_qp_ord;
+ __be32 max_qp_ird;
+ __be32 max_qp_ord;
u32 flags;
- u32 max_mws;
+ __be32 max_mws;
u32 pbe_range_low;
u32 pbe_range_high;
u32 max_srqs;
@@ -405,7 +405,7 @@
struct c2wr_rnic_setconfig_req {
struct c2wr_hdr hdr;
u32 rnic_handle;
- u32 option; /* See c2_setconfig_cmd_t */
+ __be32 option; /* See c2_setconfig_cmd_t */
/* variable data and pad. See c2_netaddr and c2_route */
u8 data[0];
} __attribute__((packed)) ;
@@ -441,18 +441,18 @@
*/
struct c2wr_cq_create_req {
struct c2wr_hdr hdr;
- u64 shared_ht;
+ __be64 shared_ht;
u64 user_context;
- u64 msg_pool;
+ __be64 msg_pool;
u32 rnic_handle;
- u32 msg_size;
- u32 depth;
+ __be32 msg_size;
+ __be32 depth;
} __attribute__((packed)) ;
struct c2wr_cq_create_rep {
struct c2wr_hdr hdr;
- u32 mq_index;
- u32 adapter_shared;
+ __be32 mq_index;
+ __be32 adapter_shared;
u32 cq_handle;
} __attribute__((packed)) ;
@@ -585,40 +585,40 @@
struct c2wr_qp_create_req {
struct c2wr_hdr hdr;
- u64 shared_sq_ht;
- u64 shared_rq_ht;
+ __be64 shared_sq_ht;
+ __be64 shared_rq_ht;
u64 user_context;
u32 rnic_handle;
u32 sq_cq_handle;
u32 rq_cq_handle;
- u32 sq_depth;
- u32 rq_depth;
+ __be32 sq_depth;
+ __be32 rq_depth;
u32 srq_handle;
u32 srq_limit;
- u32 flags; /* see enum c2wr_qp_flags */
- u32 send_sgl_depth;
- u32 recv_sgl_depth;
- u32 rdma_write_sgl_depth;
- u32 ord;
- u32 ird;
+ __be32 flags; /* see enum c2wr_qp_flags */
+ __be32 send_sgl_depth;
+ __be32 recv_sgl_depth;
+ __be32 rdma_write_sgl_depth;
+ __be32 ord;
+ __be32 ird;
u32 pd_id;
} __attribute__((packed)) ;
struct c2wr_qp_create_rep {
struct c2wr_hdr hdr;
- u32 sq_depth;
- u32 rq_depth;
+ __be32 sq_depth;
+ __be32 rq_depth;
u32 send_sgl_depth;
u32 recv_sgl_depth;
u32 rdma_write_sgl_depth;
u32 ord;
u32 ird;
- u32 sq_msg_size;
- u32 sq_mq_index;
- u32 sq_mq_start;
- u32 rq_msg_size;
- u32 rq_mq_index;
- u32 rq_mq_start;
+ __be32 sq_msg_size;
+ __be32 sq_mq_index;
+ __be32 sq_mq_start;
+ __be32 rq_msg_size;
+ __be32 rq_mq_index;
+ __be32 rq_mq_start;
u32 qp_handle;
} __attribute__((packed)) ;
@@ -667,11 +667,11 @@
u32 stream_msg_length;
u32 rnic_handle;
u32 qp_handle;
- u32 next_qp_state;
- u32 ord;
- u32 ird;
- u32 sq_depth;
- u32 rq_depth;
+ __be32 next_qp_state;
+ __be32 ord;
+ __be32 ird;
+ __be32 sq_depth;
+ __be32 rq_depth;
u32 llp_ep_handle;
} __attribute__((packed)) ;
@@ -721,10 +721,10 @@
struct c2wr_hdr hdr;
u32 rnic_handle;
u32 qp_handle;
- u32 remote_addr;
- u16 remote_port;
+ __be32 remote_addr;
+ __be16 remote_port;
u16 pad;
- u32 private_data_length;
+ __be32 private_data_length;
u8 private_data[0]; /* Private data in-line. */
} __attribute__((packed)) ;
@@ -759,25 +759,25 @@
struct c2wr_nsmr_register_req {
struct c2wr_hdr hdr;
- u64 va;
+ __be64 va;
u32 rnic_handle;
- u16 flags;
+ __be16 flags;
u8 stag_key;
u8 pad;
u32 pd_id;
- u32 pbl_depth;
- u32 pbe_size;
- u32 fbo;
- u32 length;
- u32 addrs_length;
+ __be32 pbl_depth;
+ __be32 pbe_size;
+ __be32 fbo;
+ __be32 length;
+ __be32 addrs_length;
/* array of paddrs (must be aligned on a 64bit boundary) */
- u64 paddrs[0];
+ __be64 paddrs[0];
} __attribute__((packed)) ;
struct c2wr_nsmr_register_rep {
struct c2wr_hdr hdr;
u32 pbl_depth;
- u32 stag_index;
+ __be32 stag_index;
} __attribute__((packed)) ;
union c2wr_nsmr_register {
@@ -788,11 +788,11 @@
struct c2wr_nsmr_pbl_req {
struct c2wr_hdr hdr;
u32 rnic_handle;
- u32 flags;
- u32 stag_index;
- u32 addrs_length;
+ __be32 flags;
+ __be32 stag_index;
+ __be32 addrs_length;
/* array of paddrs (must be aligned on a 64bit boundary) */
- u64 paddrs[0];
+ __be64 paddrs[0];
} __attribute__((packed)) ;
struct c2wr_nsmr_pbl_rep {
@@ -847,7 +847,7 @@
struct c2wr_stag_dealloc_req {
struct c2wr_hdr hdr;
u32 rnic_handle;
- u32 stag_index;
+ __be32 stag_index;
} __attribute__((packed)) ;
struct c2wr_stag_dealloc_rep {
@@ -949,7 +949,7 @@
u64 qp_user_context; /* c2_user_qp_t * */
u32 qp_state; /* Current QP State */
u32 handle; /* QPID or EP Handle */
- u32 bytes_rcvd; /* valid for RECV WCs */
+ __be32 bytes_rcvd; /* valid for RECV WCs */
u32 stag;
} __attribute__((packed)) ;
@@ -984,8 +984,8 @@
*/
struct c2wr_send_req {
struct c2_sq_hdr sq_hdr;
- u32 sge_len;
- u32 remote_stag;
+ __be32 sge_len;
+ __be32 remote_stag;
u8 data[0]; /* SGE array */
} __attribute__((packed));
@@ -996,9 +996,9 @@
struct c2wr_rdma_write_req {
struct c2_sq_hdr sq_hdr;
- u64 remote_to;
- u32 remote_stag;
- u32 sge_len;
+ __be64 remote_to;
+ __be32 remote_stag;
+ __be32 sge_len;
u8 data[0]; /* SGE array */
} __attribute__((packed));
@@ -1009,11 +1009,11 @@
struct c2wr_rdma_read_req {
struct c2_sq_hdr sq_hdr;
- u64 local_to;
- u64 remote_to;
- u32 local_stag;
- u32 remote_stag;
- u32 length;
+ __be64 local_to;
+ __be64 remote_to;
+ __be32 local_stag;
+ __be32 remote_stag;
+ __be32 length;
} __attribute__((packed));
union c2wr_rdma_read {
@@ -1113,9 +1113,9 @@
struct c2wr_ae_hdr {
struct c2wr_hdr hdr;
u64 user_context; /* user context for this res. */
- u32 resource_type; /* see enum c2_resource_indicator */
- u32 resource; /* handle for resource */
- u32 qp_state; /* current QP State */
+ __be32 resource_type; /* see enum c2_resource_indicator */
+ __be32 resource; /* handle for resource */
+ __be32 qp_state; /* current QP State */
} __attribute__((packed));
/*
@@ -1124,11 +1124,11 @@
*/
struct c2wr_ae_active_connect_results {
struct c2wr_ae_hdr ae_hdr;
- u32 laddr;
- u32 raddr;
- u16 lport;
- u16 rport;
- u32 private_data_length;
+ __be32 laddr;
+ __be32 raddr;
+ __be16 lport;
+ __be16 rport;
+ __be32 private_data_length;
u8 private_data[0]; /* data is in-line in the msg. */
} __attribute__((packed));
@@ -1142,11 +1142,11 @@
struct c2wr_ae_connection_request {
struct c2wr_ae_hdr ae_hdr;
u32 cr_handle; /* connreq handle (sock ptr) */
- u32 laddr;
- u32 raddr;
- u16 lport;
- u16 rport;
- u32 private_data_length;
+ __be32 laddr;
+ __be32 raddr;
+ __be16 lport;
+ __be16 rport;
+ __be32 private_data_length;
u8 private_data[0]; /* data is in-line in the msg. */
} __attribute__((packed));
@@ -1158,12 +1158,12 @@
struct c2wr_init_req {
struct c2wr_hdr hdr;
- u64 hint_count;
- u64 q0_host_shared;
- u64 q1_host_shared;
- u64 q1_host_msg_pool;
- u64 q2_host_shared;
- u64 q2_host_msg_pool;
+ __be64 hint_count;
+ __be64 q0_host_shared;
+ __be64 q1_host_shared;
+ __be64 q1_host_msg_pool;
+ __be64 q2_host_shared;
+ __be64 q2_host_msg_pool;
} __attribute__((packed));
struct c2wr_init_rep {
@@ -1276,10 +1276,10 @@
struct c2wr_hdr hdr;
u64 user_context; /* returned in AEs. */
u32 rnic_handle;
- u32 local_addr; /* local addr, or 0 */
- u16 local_port; /* 0 means "pick one" */
+ __be32 local_addr; /* local addr, or 0 */
+ __be16 local_port; /* 0 means "pick one" */
u16 pad;
- u32 backlog; /* tradional tcp listen bl */
+ __be32 backlog; /* tradional tcp listen bl */
} __attribute__((packed));
struct c2wr_ep_listen_create_rep {
@@ -1340,7 +1340,7 @@
u32 rnic_handle;
u32 qp_handle; /* QP to bind to this LLP conn */
u32 ep_handle; /* LLP handle to accept */
- u32 private_data_length;
+ __be32 private_data_length;
u8 private_data[0]; /* data in-line in msg. */
} __attribute__((packed));
@@ -1508,7 +1508,7 @@
{
((struct c2wr_hdr *) wr)->sge_count = sge_count;
}
-static __inline__ u32 c2_wr_get_wqe_count(void *wr)
+static __inline__ __be32 c2_wr_get_wqe_count(void *wr)
{
return ((struct c2wr_hdr *) wr)->wqe_count;
}
diff --git a/drivers/infiniband/hw/cxgb3/cxio_dbg.c b/drivers/infiniband/hw/cxgb3/cxio_dbg.c
index 75f7b16..a8d24d5 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_dbg.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_dbg.c
@@ -45,16 +45,16 @@
m = kmalloc(sizeof(*m) + size, GFP_ATOMIC);
if (!m) {
- PDBG("%s couldn't allocate memory.\n", __FUNCTION__);
+ PDBG("%s couldn't allocate memory.\n", __func__);
return;
}
m->mem_id = MEM_PMRX;
m->addr = (stag>>8) * 32 + rdev->rnic_info.tpt_base;
m->len = size;
- PDBG("%s TPT addr 0x%x len %d\n", __FUNCTION__, m->addr, m->len);
+ PDBG("%s TPT addr 0x%x len %d\n", __func__, m->addr, m->len);
rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m);
if (rc) {
- PDBG("%s toectl returned error %d\n", __FUNCTION__, rc);
+ PDBG("%s toectl returned error %d\n", __func__, rc);
kfree(m);
return;
}
@@ -82,17 +82,17 @@
m = kmalloc(sizeof(*m) + size, GFP_ATOMIC);
if (!m) {
- PDBG("%s couldn't allocate memory.\n", __FUNCTION__);
+ PDBG("%s couldn't allocate memory.\n", __func__);
return;
}
m->mem_id = MEM_PMRX;
m->addr = pbl_addr;
m->len = size;
PDBG("%s PBL addr 0x%x len %d depth %d\n",
- __FUNCTION__, m->addr, m->len, npages);
+ __func__, m->addr, m->len, npages);
rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m);
if (rc) {
- PDBG("%s toectl returned error %d\n", __FUNCTION__, rc);
+ PDBG("%s toectl returned error %d\n", __func__, rc);
kfree(m);
return;
}
@@ -144,16 +144,16 @@
m = kmalloc(sizeof(*m) + size, GFP_ATOMIC);
if (!m) {
- PDBG("%s couldn't allocate memory.\n", __FUNCTION__);
+ PDBG("%s couldn't allocate memory.\n", __func__);
return;
}
m->mem_id = MEM_PMRX;
m->addr = ((hwtid)<<10) + rdev->rnic_info.rqt_base;
m->len = size;
- PDBG("%s RQT addr 0x%x len %d\n", __FUNCTION__, m->addr, m->len);
+ PDBG("%s RQT addr 0x%x len %d\n", __func__, m->addr, m->len);
rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m);
if (rc) {
- PDBG("%s toectl returned error %d\n", __FUNCTION__, rc);
+ PDBG("%s toectl returned error %d\n", __func__, rc);
kfree(m);
return;
}
@@ -177,16 +177,16 @@
m = kmalloc(sizeof(*m) + size, GFP_ATOMIC);
if (!m) {
- PDBG("%s couldn't allocate memory.\n", __FUNCTION__);
+ PDBG("%s couldn't allocate memory.\n", __func__);
return;
}
m->mem_id = MEM_CM;
m->addr = hwtid * size;
m->len = size;
- PDBG("%s TCB %d len %d\n", __FUNCTION__, m->addr, m->len);
+ PDBG("%s TCB %d len %d\n", __func__, m->addr, m->len);
rc = rdev->t3cdev_p->ctl(rdev->t3cdev_p, RDMA_GET_MEM, m);
if (rc) {
- PDBG("%s toectl returned error %d\n", __FUNCTION__, rc);
+ PDBG("%s toectl returned error %d\n", __func__, rc);
kfree(m);
return;
}
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index 03c5ff6..66eb703 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -140,7 +140,7 @@
struct t3_modify_qp_wr *wqe;
struct sk_buff *skb = alloc_skb(sizeof(*wqe), GFP_KERNEL);
if (!skb) {
- PDBG("%s alloc_skb failed\n", __FUNCTION__);
+ PDBG("%s alloc_skb failed\n", __func__);
return -ENOMEM;
}
wqe = (struct t3_modify_qp_wr *) skb_put(skb, sizeof(*wqe));
@@ -225,7 +225,7 @@
}
out:
mutex_unlock(&uctx->lock);
- PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid);
+ PDBG("%s qpid 0x%x\n", __func__, qpid);
return qpid;
}
@@ -237,7 +237,7 @@
entry = kmalloc(sizeof *entry, GFP_KERNEL);
if (!entry)
return;
- PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid);
+ PDBG("%s qpid 0x%x\n", __func__, qpid);
entry->qpid = qpid;
mutex_lock(&uctx->lock);
list_add_tail(&entry->entry, &uctx->qpids);
@@ -300,7 +300,7 @@
if (!kernel_domain)
wq->udb = (u64)rdev_p->rnic_info.udbell_physbase +
(wq->qpid << rdev_p->qpshift);
- PDBG("%s qpid 0x%x doorbell 0x%p udb 0x%llx\n", __FUNCTION__,
+ PDBG("%s qpid 0x%x doorbell 0x%p udb 0x%llx\n", __func__,
wq->qpid, wq->doorbell, (unsigned long long) wq->udb);
return 0;
err4:
@@ -345,7 +345,7 @@
{
struct t3_cqe cqe;
- PDBG("%s wq %p cq %p sw_rptr 0x%x sw_wptr 0x%x\n", __FUNCTION__,
+ PDBG("%s wq %p cq %p sw_rptr 0x%x sw_wptr 0x%x\n", __func__,
wq, cq, cq->sw_rptr, cq->sw_wptr);
memset(&cqe, 0, sizeof(cqe));
cqe.header = cpu_to_be32(V_CQE_STATUS(TPT_ERR_SWFLUSH) |
@@ -363,10 +363,10 @@
{
u32 ptr;
- PDBG("%s wq %p cq %p\n", __FUNCTION__, wq, cq);
+ PDBG("%s wq %p cq %p\n", __func__, wq, cq);
/* flush RQ */
- PDBG("%s rq_rptr %u rq_wptr %u skip count %u\n", __FUNCTION__,
+ PDBG("%s rq_rptr %u rq_wptr %u skip count %u\n", __func__,
wq->rq_rptr, wq->rq_wptr, count);
ptr = wq->rq_rptr + count;
while (ptr++ != wq->rq_wptr)
@@ -378,7 +378,7 @@
{
struct t3_cqe cqe;
- PDBG("%s wq %p cq %p sw_rptr 0x%x sw_wptr 0x%x\n", __FUNCTION__,
+ PDBG("%s wq %p cq %p sw_rptr 0x%x sw_wptr 0x%x\n", __func__,
wq, cq, cq->sw_rptr, cq->sw_wptr);
memset(&cqe, 0, sizeof(cqe));
cqe.header = cpu_to_be32(V_CQE_STATUS(TPT_ERR_SWFLUSH) |
@@ -415,11 +415,11 @@
{
struct t3_cqe *cqe, *swcqe;
- PDBG("%s cq %p cqid 0x%x\n", __FUNCTION__, cq, cq->cqid);
+ PDBG("%s cq %p cqid 0x%x\n", __func__, cq, cq->cqid);
cqe = cxio_next_hw_cqe(cq);
while (cqe) {
PDBG("%s flushing hwcq rptr 0x%x to swcq wptr 0x%x\n",
- __FUNCTION__, cq->rptr, cq->sw_wptr);
+ __func__, cq->rptr, cq->sw_wptr);
swcqe = cq->sw_queue + Q_PTR2IDX(cq->sw_wptr, cq->size_log2);
*swcqe = *cqe;
swcqe->header |= cpu_to_be32(V_CQE_SWCQE(1));
@@ -461,7 +461,7 @@
(*count)++;
ptr++;
}
- PDBG("%s cq %p count %d\n", __FUNCTION__, cq, *count);
+ PDBG("%s cq %p count %d\n", __func__, cq, *count);
}
void cxio_count_rcqes(struct t3_cq *cq, struct t3_wq *wq, int *count)
@@ -470,7 +470,7 @@
u32 ptr;
*count = 0;
- PDBG("%s count zero %d\n", __FUNCTION__, *count);
+ PDBG("%s count zero %d\n", __func__, *count);
ptr = cq->sw_rptr;
while (!Q_EMPTY(ptr, cq->sw_wptr)) {
cqe = cq->sw_queue + (Q_PTR2IDX(ptr, cq->size_log2));
@@ -479,7 +479,7 @@
(*count)++;
ptr++;
}
- PDBG("%s cq %p count %d\n", __FUNCTION__, cq, *count);
+ PDBG("%s cq %p count %d\n", __func__, cq, *count);
}
static int cxio_hal_init_ctrl_cq(struct cxio_rdev *rdev_p)
@@ -506,12 +506,12 @@
skb = alloc_skb(sizeof(*wqe), GFP_KERNEL);
if (!skb) {
- PDBG("%s alloc_skb failed\n", __FUNCTION__);
+ PDBG("%s alloc_skb failed\n", __func__);
return -ENOMEM;
}
err = cxio_hal_init_ctrl_cq(rdev_p);
if (err) {
- PDBG("%s err %d initializing ctrl_cq\n", __FUNCTION__, err);
+ PDBG("%s err %d initializing ctrl_cq\n", __func__, err);
goto err;
}
rdev_p->ctrl_qp.workq = dma_alloc_coherent(
@@ -521,7 +521,7 @@
&(rdev_p->ctrl_qp.dma_addr),
GFP_KERNEL);
if (!rdev_p->ctrl_qp.workq) {
- PDBG("%s dma_alloc_coherent failed\n", __FUNCTION__);
+ PDBG("%s dma_alloc_coherent failed\n", __func__);
err = -ENOMEM;
goto err;
}
@@ -591,25 +591,25 @@
addr &= 0x7FFFFFF;
nr_wqe = len % 96 ? len / 96 + 1 : len / 96; /* 96B max per WQE */
PDBG("%s wptr 0x%x rptr 0x%x len %d, nr_wqe %d data %p addr 0x%0x\n",
- __FUNCTION__, rdev_p->ctrl_qp.wptr, rdev_p->ctrl_qp.rptr, len,
+ __func__, rdev_p->ctrl_qp.wptr, rdev_p->ctrl_qp.rptr, len,
nr_wqe, data, addr);
utx_len = 3; /* in 32B unit */
for (i = 0; i < nr_wqe; i++) {
if (Q_FULL(rdev_p->ctrl_qp.rptr, rdev_p->ctrl_qp.wptr,
T3_CTRL_QP_SIZE_LOG2)) {
PDBG("%s ctrl_qp full wtpr 0x%0x rptr 0x%0x, "
- "wait for more space i %d\n", __FUNCTION__,
+ "wait for more space i %d\n", __func__,
rdev_p->ctrl_qp.wptr, rdev_p->ctrl_qp.rptr, i);
if (wait_event_interruptible(rdev_p->ctrl_qp.waitq,
!Q_FULL(rdev_p->ctrl_qp.rptr,
rdev_p->ctrl_qp.wptr,
T3_CTRL_QP_SIZE_LOG2))) {
PDBG("%s ctrl_qp workq interrupted\n",
- __FUNCTION__);
+ __func__);
return -ERESTARTSYS;
}
PDBG("%s ctrl_qp wakeup, continue posting work request "
- "i %d\n", __FUNCTION__, i);
+ "i %d\n", __func__, i);
}
wqe = (__be64 *)(rdev_p->ctrl_qp.workq + (rdev_p->ctrl_qp.wptr %
(1 << T3_CTRL_QP_SIZE_LOG2)));
@@ -630,7 +630,7 @@
if ((i != 0) &&
(i % (((1 << T3_CTRL_QP_SIZE_LOG2)) >> 1) == 0)) {
flag = T3_COMPLETION_FLAG;
- PDBG("%s force completion at i %d\n", __FUNCTION__, i);
+ PDBG("%s force completion at i %d\n", __func__, i);
}
/* build the utx mem command */
@@ -701,7 +701,7 @@
*stag = (stag_idx << 8) | ((*stag) & 0xFF);
}
PDBG("%s stag_state 0x%0x type 0x%0x pdid 0x%0x, stag_idx 0x%x\n",
- __FUNCTION__, stag_state, type, pdid, stag_idx);
+ __func__, stag_state, type, pdid, stag_idx);
if (reset_tpt_entry)
cxio_hal_pblpool_free(rdev_p, *pbl_addr, *pbl_size << 3);
@@ -718,7 +718,7 @@
if (pbl) {
PDBG("%s *pdb_addr 0x%x, pbl_base 0x%x, pbl_size %d\n",
- __FUNCTION__, *pbl_addr, rdev_p->rnic_info.pbl_base,
+ __func__, *pbl_addr, rdev_p->rnic_info.pbl_base,
*pbl_size);
err = cxio_hal_ctrl_qp_write_mem(rdev_p,
(*pbl_addr >> 5),
@@ -814,7 +814,7 @@
struct sk_buff *skb = alloc_skb(sizeof(*wqe), GFP_ATOMIC);
if (!skb)
return -ENOMEM;
- PDBG("%s rdev_p %p\n", __FUNCTION__, rdev_p);
+ PDBG("%s rdev_p %p\n", __func__, rdev_p);
wqe = (struct t3_rdma_init_wr *) __skb_put(skb, sizeof(*wqe));
wqe->wrh.op_seop_flags = cpu_to_be32(V_FW_RIWR_OP(T3_WR_INIT));
wqe->wrh.gen_tid_len = cpu_to_be32(V_FW_RIWR_TID(attr->tid) |
@@ -856,7 +856,7 @@
struct respQ_msg_t *rsp_msg = (struct respQ_msg_t *) skb->data;
PDBG("%d: %s cq_id 0x%x cq_ptr 0x%x genbit %0x overflow %0x an %0x"
" se %0x notify %0x cqbranch %0x creditth %0x\n",
- cnt, __FUNCTION__, RSPQ_CQID(rsp_msg), RSPQ_CQPTR(rsp_msg),
+ cnt, __func__, RSPQ_CQID(rsp_msg), RSPQ_CQPTR(rsp_msg),
RSPQ_GENBIT(rsp_msg), RSPQ_OVERFLOW(rsp_msg), RSPQ_AN(rsp_msg),
RSPQ_SE(rsp_msg), RSPQ_NOTIFY(rsp_msg), RSPQ_CQBRANCH(rsp_msg),
RSPQ_CREDIT_THRESH(rsp_msg));
@@ -868,7 +868,7 @@
CQE_WRID_HI(rsp_msg->cqe), CQE_WRID_LOW(rsp_msg->cqe));
rdev_p = (struct cxio_rdev *)t3cdev_p->ulp;
if (!rdev_p) {
- PDBG("%s called by t3cdev %p with null ulp\n", __FUNCTION__,
+ PDBG("%s called by t3cdev %p with null ulp\n", __func__,
t3cdev_p);
return 0;
}
@@ -908,13 +908,13 @@
strncpy(rdev_p->dev_name, rdev_p->t3cdev_p->name,
T3_MAX_DEV_NAME_LEN);
} else {
- PDBG("%s t3cdev_p or dev_name must be set\n", __FUNCTION__);
+ PDBG("%s t3cdev_p or dev_name must be set\n", __func__);
return -EINVAL;
}
list_add_tail(&rdev_p->entry, &rdev_list);
- PDBG("%s opening rnic dev %s\n", __FUNCTION__, rdev_p->dev_name);
+ PDBG("%s opening rnic dev %s\n", __func__, rdev_p->dev_name);
memset(&rdev_p->ctrl_qp, 0, sizeof(rdev_p->ctrl_qp));
if (!rdev_p->t3cdev_p)
rdev_p->t3cdev_p = dev2t3cdev(netdev_p);
@@ -923,14 +923,14 @@
&(rdev_p->rnic_info));
if (err) {
printk(KERN_ERR "%s t3cdev_p(%p)->ctl returned error %d.\n",
- __FUNCTION__, rdev_p->t3cdev_p, err);
+ __func__, rdev_p->t3cdev_p, err);
goto err1;
}
err = rdev_p->t3cdev_p->ctl(rdev_p->t3cdev_p, GET_PORTS,
&(rdev_p->port_info));
if (err) {
printk(KERN_ERR "%s t3cdev_p(%p)->ctl returned error %d.\n",
- __FUNCTION__, rdev_p->t3cdev_p, err);
+ __func__, rdev_p->t3cdev_p, err);
goto err1;
}
@@ -947,7 +947,7 @@
rdev_p->qpmask = (65536 >> ilog2(rdev_p->qpnr)) - 1;
PDBG("%s rnic %s info: tpt_base 0x%0x tpt_top 0x%0x num stags %d "
"pbl_base 0x%0x pbl_top 0x%0x rqt_base 0x%0x, rqt_top 0x%0x\n",
- __FUNCTION__, rdev_p->dev_name, rdev_p->rnic_info.tpt_base,
+ __func__, rdev_p->dev_name, rdev_p->rnic_info.tpt_base,
rdev_p->rnic_info.tpt_top, cxio_num_stags(rdev_p),
rdev_p->rnic_info.pbl_base,
rdev_p->rnic_info.pbl_top, rdev_p->rnic_info.rqt_base,
@@ -961,7 +961,7 @@
err = cxio_hal_init_ctrl_qp(rdev_p);
if (err) {
printk(KERN_ERR "%s error %d initializing ctrl_qp.\n",
- __FUNCTION__, err);
+ __func__, err);
goto err1;
}
err = cxio_hal_init_resource(rdev_p, cxio_num_stags(rdev_p), 0,
@@ -969,19 +969,19 @@
T3_MAX_NUM_PD);
if (err) {
printk(KERN_ERR "%s error %d initializing hal resources.\n",
- __FUNCTION__, err);
+ __func__, err);
goto err2;
}
err = cxio_hal_pblpool_create(rdev_p);
if (err) {
printk(KERN_ERR "%s error %d initializing pbl mem pool.\n",
- __FUNCTION__, err);
+ __func__, err);
goto err3;
}
err = cxio_hal_rqtpool_create(rdev_p);
if (err) {
printk(KERN_ERR "%s error %d initializing rqt mem pool.\n",
- __FUNCTION__, err);
+ __func__, err);
goto err4;
}
return 0;
@@ -1043,7 +1043,7 @@
* Insert this completed cqe into the swcq.
*/
PDBG("%s moving cqe into swcq sq idx %ld cq idx %ld\n",
- __FUNCTION__, Q_PTR2IDX(ptr, wq->sq_size_log2),
+ __func__, Q_PTR2IDX(ptr, wq->sq_size_log2),
Q_PTR2IDX(cq->sw_wptr, cq->size_log2));
sqp->cqe.header |= htonl(V_CQE_SWCQE(1));
*(cq->sw_queue + Q_PTR2IDX(cq->sw_wptr, cq->size_log2))
@@ -1112,7 +1112,7 @@
PDBG("%s CQE OOO %d qpid 0x%0x genbit %d type %d status 0x%0x"
" opcode 0x%0x len 0x%0x wrid_hi_stag 0x%x wrid_low_msn 0x%x\n",
- __FUNCTION__, CQE_OOO(*hw_cqe), CQE_QPID(*hw_cqe),
+ __func__, CQE_OOO(*hw_cqe), CQE_QPID(*hw_cqe),
CQE_GENBIT(*hw_cqe), CQE_TYPE(*hw_cqe), CQE_STATUS(*hw_cqe),
CQE_OPCODE(*hw_cqe), CQE_LEN(*hw_cqe), CQE_WRID_HI(*hw_cqe),
CQE_WRID_LOW(*hw_cqe));
@@ -1215,7 +1215,7 @@
struct t3_swsq *sqp;
PDBG("%s out of order completion going in swsq at idx %ld\n",
- __FUNCTION__,
+ __func__,
Q_PTR2IDX(CQE_WRID_SQ_WPTR(*hw_cqe), wq->sq_size_log2));
sqp = wq->sq +
Q_PTR2IDX(CQE_WRID_SQ_WPTR(*hw_cqe), wq->sq_size_log2);
@@ -1234,13 +1234,13 @@
*/
if (SQ_TYPE(*hw_cqe)) {
wq->sq_rptr = CQE_WRID_SQ_WPTR(*hw_cqe);
- PDBG("%s completing sq idx %ld\n", __FUNCTION__,
+ PDBG("%s completing sq idx %ld\n", __func__,
Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2));
*cookie = (wq->sq +
Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2))->wr_id;
wq->sq_rptr++;
} else {
- PDBG("%s completing rq idx %ld\n", __FUNCTION__,
+ PDBG("%s completing rq idx %ld\n", __func__,
Q_PTR2IDX(wq->rq_rptr, wq->rq_size_log2));
*cookie = *(wq->rq + Q_PTR2IDX(wq->rq_rptr, wq->rq_size_log2));
wq->rq_rptr++;
@@ -1255,11 +1255,11 @@
skip_cqe:
if (SW_CQE(*hw_cqe)) {
PDBG("%s cq %p cqid 0x%x skip sw cqe sw_rptr 0x%x\n",
- __FUNCTION__, cq, cq->cqid, cq->sw_rptr);
+ __func__, cq, cq->cqid, cq->sw_rptr);
++cq->sw_rptr;
} else {
PDBG("%s cq %p cqid 0x%x skip hw cqe rptr 0x%x\n",
- __FUNCTION__, cq, cq->cqid, cq->rptr);
+ __func__, cq, cq->cqid, cq->rptr);
++cq->rptr;
/*
diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c
index d3095ae..45ed4f2 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_resource.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c
@@ -206,13 +206,13 @@
u32 cxio_hal_get_qpid(struct cxio_hal_resource *rscp)
{
u32 qpid = cxio_hal_get_resource(rscp->qpid_fifo);
- PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid);
+ PDBG("%s qpid 0x%x\n", __func__, qpid);
return qpid;
}
void cxio_hal_put_qpid(struct cxio_hal_resource *rscp, u32 qpid)
{
- PDBG("%s qpid 0x%x\n", __FUNCTION__, qpid);
+ PDBG("%s qpid 0x%x\n", __func__, qpid);
cxio_hal_put_resource(rscp->qpid_fifo, qpid);
}
@@ -255,13 +255,13 @@
u32 cxio_hal_pblpool_alloc(struct cxio_rdev *rdev_p, int size)
{
unsigned long addr = gen_pool_alloc(rdev_p->pbl_pool, size);
- PDBG("%s addr 0x%x size %d\n", __FUNCTION__, (u32)addr, size);
+ PDBG("%s addr 0x%x size %d\n", __func__, (u32)addr, size);
return (u32)addr;
}
void cxio_hal_pblpool_free(struct cxio_rdev *rdev_p, u32 addr, int size)
{
- PDBG("%s addr 0x%x size %d\n", __FUNCTION__, addr, size);
+ PDBG("%s addr 0x%x size %d\n", __func__, addr, size);
gen_pool_free(rdev_p->pbl_pool, (unsigned long)addr, size);
}
@@ -292,13 +292,13 @@
u32 cxio_hal_rqtpool_alloc(struct cxio_rdev *rdev_p, int size)
{
unsigned long addr = gen_pool_alloc(rdev_p->rqt_pool, size << 6);
- PDBG("%s addr 0x%x size %d\n", __FUNCTION__, (u32)addr, size << 6);
+ PDBG("%s addr 0x%x size %d\n", __func__, (u32)addr, size << 6);
return (u32)addr;
}
void cxio_hal_rqtpool_free(struct cxio_rdev *rdev_p, u32 addr, int size)
{
- PDBG("%s addr 0x%x size %d\n", __FUNCTION__, addr, size << 6);
+ PDBG("%s addr 0x%x size %d\n", __func__, addr, size << 6);
gen_pool_free(rdev_p->rqt_pool, (unsigned long)addr, size << 6);
}
diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c
index 0315c9d..6ba4138 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.c
+++ b/drivers/infiniband/hw/cxgb3/iwch.c
@@ -65,7 +65,7 @@
static void rnic_init(struct iwch_dev *rnicp)
{
- PDBG("%s iwch_dev %p\n", __FUNCTION__, rnicp);
+ PDBG("%s iwch_dev %p\n", __func__, rnicp);
idr_init(&rnicp->cqidr);
idr_init(&rnicp->qpidr);
idr_init(&rnicp->mmidr);
@@ -106,7 +106,7 @@
struct iwch_dev *rnicp;
static int vers_printed;
- PDBG("%s t3cdev %p\n", __FUNCTION__, tdev);
+ PDBG("%s t3cdev %p\n", __func__, tdev);
if (!vers_printed++)
printk(KERN_INFO MOD "Chelsio T3 RDMA Driver - version %s\n",
DRV_VERSION);
@@ -144,7 +144,7 @@
static void close_rnic_dev(struct t3cdev *tdev)
{
struct iwch_dev *dev, *tmp;
- PDBG("%s t3cdev %p\n", __FUNCTION__, tdev);
+ PDBG("%s t3cdev %p\n", __func__, tdev);
mutex_lock(&dev_mutex);
list_for_each_entry_safe(dev, tmp, &dev_list, entry) {
if (dev->rdev.t3cdev_p == tdev) {
diff --git a/drivers/infiniband/hw/cxgb3/iwch.h b/drivers/infiniband/hw/cxgb3/iwch.h
index caf4e60..9ad9b1e 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.h
+++ b/drivers/infiniband/hw/cxgb3/iwch.h
@@ -147,7 +147,7 @@
void *handle, u32 id)
{
int ret;
- u32 newid;
+ int newid;
do {
if (!idr_pre_get(idr, GFP_KERNEL)) {
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 99f2f2a..72ca360 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -110,9 +110,9 @@
static void start_ep_timer(struct iwch_ep *ep)
{
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
if (timer_pending(&ep->timer)) {
- PDBG("%s stopped / restarted timer ep %p\n", __FUNCTION__, ep);
+ PDBG("%s stopped / restarted timer ep %p\n", __func__, ep);
del_timer_sync(&ep->timer);
} else
get_ep(&ep->com);
@@ -124,7 +124,7 @@
static void stop_ep_timer(struct iwch_ep *ep)
{
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
del_timer_sync(&ep->timer);
put_ep(&ep->com);
}
@@ -190,7 +190,7 @@
static void set_emss(struct iwch_ep *ep, u16 opt)
{
- PDBG("%s ep %p opt %u\n", __FUNCTION__, ep, opt);
+ PDBG("%s ep %p opt %u\n", __func__, ep, opt);
ep->emss = T3C_DATA(ep->com.tdev)->mtus[G_TCPOPT_MSS(opt)] - 40;
if (G_TCPOPT_TSTAMP(opt))
ep->emss -= 12;
@@ -220,7 +220,7 @@
unsigned long flags;
spin_lock_irqsave(&epc->lock, flags);
- PDBG("%s - %s -> %s\n", __FUNCTION__, states[epc->state], states[new]);
+ PDBG("%s - %s -> %s\n", __func__, states[epc->state], states[new]);
__state_set(epc, new);
spin_unlock_irqrestore(&epc->lock, flags);
return;
@@ -236,7 +236,7 @@
spin_lock_init(&epc->lock);
init_waitqueue_head(&epc->waitq);
}
- PDBG("%s alloc ep %p\n", __FUNCTION__, epc);
+ PDBG("%s alloc ep %p\n", __func__, epc);
return epc;
}
@@ -244,13 +244,13 @@
{
struct iwch_ep_common *epc;
epc = container_of(kref, struct iwch_ep_common, kref);
- PDBG("%s ep %p state %s\n", __FUNCTION__, epc, states[state_read(epc)]);
+ PDBG("%s ep %p state %s\n", __func__, epc, states[state_read(epc)]);
kfree(epc);
}
static void release_ep_resources(struct iwch_ep *ep)
{
- PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, ep->hwtid);
+ PDBG("%s ep %p tid %d\n", __func__, ep, ep->hwtid);
cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid);
dst_release(ep->dst);
l2t_release(L2DATA(ep->com.tdev), ep->l2t);
@@ -349,7 +349,7 @@
static void arp_failure_discard(struct t3cdev *dev, struct sk_buff *skb)
{
- PDBG("%s t3cdev %p\n", __FUNCTION__, dev);
+ PDBG("%s t3cdev %p\n", __func__, dev);
kfree_skb(skb);
}
@@ -370,7 +370,7 @@
{
struct cpl_abort_req *req = cplhdr(skb);
- PDBG("%s t3cdev %p\n", __FUNCTION__, dev);
+ PDBG("%s t3cdev %p\n", __func__, dev);
req->cmd = CPL_ABORT_NO_RST;
cxgb3_ofld_send(dev, skb);
}
@@ -380,10 +380,10 @@
struct cpl_close_con_req *req;
struct sk_buff *skb;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
skb = get_skb(NULL, sizeof(*req), gfp);
if (!skb) {
- printk(KERN_ERR MOD "%s - failed to alloc skb\n", __FUNCTION__);
+ printk(KERN_ERR MOD "%s - failed to alloc skb\n", __func__);
return -ENOMEM;
}
skb->priority = CPL_PRIORITY_DATA;
@@ -400,11 +400,11 @@
{
struct cpl_abort_req *req;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
skb = get_skb(skb, sizeof(*req), gfp);
if (!skb) {
printk(KERN_ERR MOD "%s - failed to alloc skb.\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
skb->priority = CPL_PRIORITY_DATA;
@@ -426,12 +426,12 @@
unsigned int mtu_idx;
int wscale;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
skb = get_skb(NULL, sizeof(*req), GFP_KERNEL);
if (!skb) {
printk(KERN_ERR MOD "%s - failed to alloc skb.\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
mtu_idx = find_best_mtu(T3C_DATA(ep->com.tdev), dst_mtu(ep->dst));
@@ -470,7 +470,7 @@
struct mpa_message *mpa;
int len;
- PDBG("%s ep %p pd_len %d\n", __FUNCTION__, ep, ep->plen);
+ PDBG("%s ep %p pd_len %d\n", __func__, ep, ep->plen);
BUG_ON(skb_cloned(skb));
@@ -530,13 +530,13 @@
struct mpa_message *mpa;
struct sk_buff *skb;
- PDBG("%s ep %p plen %d\n", __FUNCTION__, ep, plen);
+ PDBG("%s ep %p plen %d\n", __func__, ep, plen);
mpalen = sizeof(*mpa) + plen;
skb = get_skb(NULL, mpalen + sizeof(*req), GFP_KERNEL);
if (!skb) {
- printk(KERN_ERR MOD "%s - cannot alloc skb!\n", __FUNCTION__);
+ printk(KERN_ERR MOD "%s - cannot alloc skb!\n", __func__);
return -ENOMEM;
}
skb_reserve(skb, sizeof(*req));
@@ -580,13 +580,13 @@
int len;
struct sk_buff *skb;
- PDBG("%s ep %p plen %d\n", __FUNCTION__, ep, plen);
+ PDBG("%s ep %p plen %d\n", __func__, ep, plen);
mpalen = sizeof(*mpa) + plen;
skb = get_skb(NULL, mpalen + sizeof(*req), GFP_KERNEL);
if (!skb) {
- printk(KERN_ERR MOD "%s - cannot alloc skb!\n", __FUNCTION__);
+ printk(KERN_ERR MOD "%s - cannot alloc skb!\n", __func__);
return -ENOMEM;
}
skb->priority = CPL_PRIORITY_DATA;
@@ -630,7 +630,7 @@
struct cpl_act_establish *req = cplhdr(skb);
unsigned int tid = GET_TID(req);
- PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, tid);
+ PDBG("%s ep %p tid %d\n", __func__, ep, tid);
dst_confirm(ep->dst);
@@ -663,7 +663,7 @@
{
struct iw_cm_event event;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_CLOSE;
if (ep->com.cm_id) {
@@ -680,7 +680,7 @@
{
struct iw_cm_event event;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_DISCONNECT;
if (ep->com.cm_id) {
@@ -694,7 +694,7 @@
{
struct iw_cm_event event;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_CLOSE;
event.status = -ECONNRESET;
@@ -712,7 +712,7 @@
{
struct iw_cm_event event;
- PDBG("%s ep %p status %d\n", __FUNCTION__, ep, status);
+ PDBG("%s ep %p status %d\n", __func__, ep, status);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_CONNECT_REPLY;
event.status = status;
@@ -724,7 +724,7 @@
event.private_data = ep->mpa_pkt + sizeof(struct mpa_message);
}
if (ep->com.cm_id) {
- PDBG("%s ep %p tid %d status %d\n", __FUNCTION__, ep,
+ PDBG("%s ep %p tid %d status %d\n", __func__, ep,
ep->hwtid, status);
ep->com.cm_id->event_handler(ep->com.cm_id, &event);
}
@@ -739,7 +739,7 @@
{
struct iw_cm_event event;
- PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, ep->hwtid);
+ PDBG("%s ep %p tid %d\n", __func__, ep, ep->hwtid);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_CONNECT_REQUEST;
event.local_addr = ep->com.local_addr;
@@ -759,11 +759,11 @@
{
struct iw_cm_event event;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_ESTABLISHED;
if (ep->com.cm_id) {
- PDBG("%s ep %p tid %d\n", __FUNCTION__, ep, ep->hwtid);
+ PDBG("%s ep %p tid %d\n", __func__, ep, ep->hwtid);
ep->com.cm_id->event_handler(ep->com.cm_id, &event);
}
}
@@ -773,7 +773,7 @@
struct cpl_rx_data_ack *req;
struct sk_buff *skb;
- PDBG("%s ep %p credits %u\n", __FUNCTION__, ep, credits);
+ PDBG("%s ep %p credits %u\n", __func__, ep, credits);
skb = get_skb(NULL, sizeof(*req), GFP_KERNEL);
if (!skb) {
printk(KERN_ERR MOD "update_rx_credits - cannot alloc skb!\n");
@@ -797,7 +797,7 @@
enum iwch_qp_attr_mask mask;
int err;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
/*
* Stop mpa timer. If it expired, then the state has
@@ -884,7 +884,7 @@
ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0;
ep->mpa_attr.version = mpa_rev;
PDBG("%s - crc_enabled=%d, recv_marker_enabled=%d, "
- "xmit_marker_enabled=%d, version=%d\n", __FUNCTION__,
+ "xmit_marker_enabled=%d, version=%d\n", __func__,
ep->mpa_attr.crc_enabled, ep->mpa_attr.recv_marker_enabled,
ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version);
@@ -915,7 +915,7 @@
struct mpa_message *mpa;
u16 plen;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
/*
* Stop mpa timer. If it expired, then the state has
@@ -935,7 +935,7 @@
return;
}
- PDBG("%s enter (%s line %u)\n", __FUNCTION__, __FILE__, __LINE__);
+ PDBG("%s enter (%s line %u)\n", __func__, __FILE__, __LINE__);
/*
* Copy the new data into our accumulation buffer.
@@ -950,7 +950,7 @@
*/
if (ep->mpa_pkt_len < sizeof(*mpa))
return;
- PDBG("%s enter (%s line %u)\n", __FUNCTION__, __FILE__, __LINE__);
+ PDBG("%s enter (%s line %u)\n", __func__, __FILE__, __LINE__);
mpa = (struct mpa_message *) ep->mpa_pkt;
/*
@@ -1000,7 +1000,7 @@
ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0;
ep->mpa_attr.version = mpa_rev;
PDBG("%s - crc_enabled=%d, recv_marker_enabled=%d, "
- "xmit_marker_enabled=%d, version=%d\n", __FUNCTION__,
+ "xmit_marker_enabled=%d, version=%d\n", __func__,
ep->mpa_attr.crc_enabled, ep->mpa_attr.recv_marker_enabled,
ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version);
@@ -1017,7 +1017,7 @@
struct cpl_rx_data *hdr = cplhdr(skb);
unsigned int dlen = ntohs(hdr->len);
- PDBG("%s ep %p dlen %u\n", __FUNCTION__, ep, dlen);
+ PDBG("%s ep %p dlen %u\n", __func__, ep, dlen);
skb_pull(skb, sizeof(*hdr));
skb_trim(skb, dlen);
@@ -1037,7 +1037,7 @@
default:
printk(KERN_ERR MOD "%s Unexpected streaming data."
" ep %p state %d tid %d\n",
- __FUNCTION__, ep, state_read(&ep->com), ep->hwtid);
+ __func__, ep, state_read(&ep->com), ep->hwtid);
/*
* The ep will timeout and inform the ULP of the failure.
@@ -1063,7 +1063,7 @@
struct cpl_wr_ack *hdr = cplhdr(skb);
unsigned int credits = ntohs(hdr->credits);
- PDBG("%s ep %p credits %u\n", __FUNCTION__, ep, credits);
+ PDBG("%s ep %p credits %u\n", __func__, ep, credits);
if (credits == 0)
return CPL_RET_BUF_DONE;
@@ -1084,7 +1084,7 @@
{
struct iwch_ep *ep = ctx;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
/*
* We get 2 abort replies from the HW. The first one must
@@ -1115,7 +1115,7 @@
struct iwch_ep *ep = ctx;
struct cpl_act_open_rpl *rpl = cplhdr(skb);
- PDBG("%s ep %p status %u errno %d\n", __FUNCTION__, ep, rpl->status,
+ PDBG("%s ep %p status %u errno %d\n", __func__, ep, rpl->status,
status2errno(rpl->status));
connect_reply_upcall(ep, status2errno(rpl->status));
state_set(&ep->com, DEAD);
@@ -1133,7 +1133,7 @@
struct sk_buff *skb;
struct cpl_pass_open_req *req;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
skb = get_skb(NULL, sizeof(*req), GFP_KERNEL);
if (!skb) {
printk(KERN_ERR MOD "t3c_listen_start failed to alloc skb!\n");
@@ -1162,7 +1162,7 @@
struct iwch_listen_ep *ep = ctx;
struct cpl_pass_open_rpl *rpl = cplhdr(skb);
- PDBG("%s ep %p status %d error %d\n", __FUNCTION__, ep,
+ PDBG("%s ep %p status %d error %d\n", __func__, ep,
rpl->status, status2errno(rpl->status));
ep->com.rpl_err = status2errno(rpl->status);
ep->com.rpl_done = 1;
@@ -1176,10 +1176,10 @@
struct sk_buff *skb;
struct cpl_close_listserv_req *req;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
skb = get_skb(NULL, sizeof(*req), GFP_KERNEL);
if (!skb) {
- printk(KERN_ERR MOD "%s - failed to alloc skb\n", __FUNCTION__);
+ printk(KERN_ERR MOD "%s - failed to alloc skb\n", __func__);
return -ENOMEM;
}
req = (struct cpl_close_listserv_req *) skb_put(skb, sizeof(*req));
@@ -1197,7 +1197,7 @@
struct iwch_listen_ep *ep = ctx;
struct cpl_close_listserv_rpl *rpl = cplhdr(skb);
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
ep->com.rpl_err = status2errno(rpl->status);
ep->com.rpl_done = 1;
wake_up(&ep->com.waitq);
@@ -1211,7 +1211,7 @@
u32 opt0h, opt0l, opt2;
int wscale;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
BUG_ON(skb_cloned(skb));
skb_trim(skb, sizeof(*rpl));
skb_get(skb);
@@ -1244,7 +1244,7 @@
static void reject_cr(struct t3cdev *tdev, u32 hwtid, __be32 peer_ip,
struct sk_buff *skb)
{
- PDBG("%s t3cdev %p tid %u peer_ip %x\n", __FUNCTION__, tdev, hwtid,
+ PDBG("%s t3cdev %p tid %u peer_ip %x\n", __func__, tdev, hwtid,
peer_ip);
BUG_ON(skb_cloned(skb));
skb_trim(skb, sizeof(struct cpl_tid_release));
@@ -1279,11 +1279,11 @@
struct rtable *rt;
struct iff_mac tim;
- PDBG("%s parent ep %p tid %u\n", __FUNCTION__, parent_ep, hwtid);
+ PDBG("%s parent ep %p tid %u\n", __func__, parent_ep, hwtid);
if (state_read(&parent_ep->com) != LISTEN) {
printk(KERN_ERR "%s - listening ep not in LISTEN\n",
- __FUNCTION__);
+ __func__);
goto reject;
}
@@ -1295,7 +1295,7 @@
if (tdev->ctl(tdev, GET_IFF_FROM_MAC, &tim) < 0 || !tim.dev) {
printk(KERN_ERR
"%s bad dst mac %02x %02x %02x %02x %02x %02x\n",
- __FUNCTION__,
+ __func__,
req->dst_mac[0],
req->dst_mac[1],
req->dst_mac[2],
@@ -1313,21 +1313,21 @@
req->peer_port, G_PASS_OPEN_TOS(ntohl(req->tos_tid)));
if (!rt) {
printk(KERN_ERR MOD "%s - failed to find dst entry!\n",
- __FUNCTION__);
+ __func__);
goto reject;
}
dst = &rt->u.dst;
l2t = t3_l2t_get(tdev, dst->neighbour, dst->neighbour->dev);
if (!l2t) {
printk(KERN_ERR MOD "%s - failed to allocate l2t entry!\n",
- __FUNCTION__);
+ __func__);
dst_release(dst);
goto reject;
}
child_ep = alloc_ep(sizeof(*child_ep), GFP_KERNEL);
if (!child_ep) {
printk(KERN_ERR MOD "%s - failed to allocate ep entry!\n",
- __FUNCTION__);
+ __func__);
l2t_release(L2DATA(tdev), l2t);
dst_release(dst);
goto reject;
@@ -1362,7 +1362,7 @@
struct iwch_ep *ep = ctx;
struct cpl_pass_establish *req = cplhdr(skb);
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
ep->snd_seq = ntohl(req->snd_isn);
ep->rcv_seq = ntohl(req->rcv_isn);
@@ -1383,7 +1383,7 @@
int disconnect = 1;
int release = 0;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
dst_confirm(ep->dst);
spin_lock_irqsave(&ep->com.lock, flags);
@@ -1473,7 +1473,7 @@
int state;
if (is_neg_adv_abort(req->status)) {
- PDBG("%s neg_adv_abort ep %p tid %d\n", __FUNCTION__, ep,
+ PDBG("%s neg_adv_abort ep %p tid %d\n", __func__, ep,
ep->hwtid);
t3_l2t_send_event(ep->com.tdev, ep->l2t);
return CPL_RET_BUF_DONE;
@@ -1489,7 +1489,7 @@
}
state = state_read(&ep->com);
- PDBG("%s ep %p state %u\n", __FUNCTION__, ep, state);
+ PDBG("%s ep %p state %u\n", __func__, ep, state);
switch (state) {
case CONNECTING:
break;
@@ -1528,14 +1528,14 @@
if (ret)
printk(KERN_ERR MOD
"%s - qp <- error failed!\n",
- __FUNCTION__);
+ __func__);
}
peer_abort_upcall(ep);
break;
case ABORTING:
break;
case DEAD:
- PDBG("%s PEER_ABORT IN DEAD STATE!!!!\n", __FUNCTION__);
+ PDBG("%s PEER_ABORT IN DEAD STATE!!!!\n", __func__);
return CPL_RET_BUF_DONE;
default:
BUG_ON(1);
@@ -1546,7 +1546,7 @@
rpl_skb = get_skb(skb, sizeof(*rpl), GFP_KERNEL);
if (!rpl_skb) {
printk(KERN_ERR MOD "%s - cannot allocate skb!\n",
- __FUNCTION__);
+ __func__);
dst_release(ep->dst);
l2t_release(L2DATA(ep->com.tdev), ep->l2t);
put_ep(&ep->com);
@@ -1573,7 +1573,7 @@
unsigned long flags;
int release = 0;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
BUG_ON(!ep);
/* The cm_id may be null if we failed to connect */
@@ -1624,9 +1624,9 @@
{
struct iwch_ep *ep = ctx;
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
skb_pull(skb, sizeof(struct cpl_rdma_terminate));
- PDBG("%s saving %d bytes of term msg\n", __FUNCTION__, skb->len);
+ PDBG("%s saving %d bytes of term msg\n", __func__, skb->len);
skb_copy_from_linear_data(skb, ep->com.qp->attr.terminate_buffer,
skb->len);
ep->com.qp->attr.terminate_msg_len = skb->len;
@@ -1639,13 +1639,13 @@
struct cpl_rdma_ec_status *rep = cplhdr(skb);
struct iwch_ep *ep = ctx;
- PDBG("%s ep %p tid %u status %d\n", __FUNCTION__, ep, ep->hwtid,
+ PDBG("%s ep %p tid %u status %d\n", __func__, ep, ep->hwtid,
rep->status);
if (rep->status) {
struct iwch_qp_attributes attrs;
printk(KERN_ERR MOD "%s BAD CLOSE - Aborting tid %u\n",
- __FUNCTION__, ep->hwtid);
+ __func__, ep->hwtid);
stop_ep_timer(ep);
attrs.next_state = IWCH_QP_STATE_ERROR;
iwch_modify_qp(ep->com.qp->rhp,
@@ -1663,7 +1663,7 @@
unsigned long flags;
spin_lock_irqsave(&ep->com.lock, flags);
- PDBG("%s ep %p tid %u state %d\n", __FUNCTION__, ep, ep->hwtid,
+ PDBG("%s ep %p tid %u state %d\n", __func__, ep, ep->hwtid,
ep->com.state);
switch (ep->com.state) {
case MPA_REQ_SENT:
@@ -1693,7 +1693,7 @@
{
int err;
struct iwch_ep *ep = to_ep(cm_id);
- PDBG("%s ep %p tid %u\n", __FUNCTION__, ep, ep->hwtid);
+ PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
if (state_read(&ep->com) == DEAD) {
put_ep(&ep->com);
@@ -1718,7 +1718,7 @@
struct iwch_dev *h = to_iwch_dev(cm_id->device);
struct iwch_qp *qp = get_qhp(h, conn_param->qpn);
- PDBG("%s ep %p tid %u\n", __FUNCTION__, ep, ep->hwtid);
+ PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
if (state_read(&ep->com) == DEAD)
return -ECONNRESET;
@@ -1739,7 +1739,7 @@
ep->com.rpl_err = 0;
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
- PDBG("%s %d ird %d ord %d\n", __FUNCTION__, __LINE__, ep->ird, ep->ord);
+ PDBG("%s %d ird %d ord %d\n", __func__, __LINE__, ep->ird, ep->ord);
get_ep(&ep->com);
@@ -1810,7 +1810,7 @@
ep = alloc_ep(sizeof(*ep), GFP_KERNEL);
if (!ep) {
- printk(KERN_ERR MOD "%s - cannot alloc ep.\n", __FUNCTION__);
+ printk(KERN_ERR MOD "%s - cannot alloc ep.\n", __func__);
err = -ENOMEM;
goto out;
}
@@ -1827,7 +1827,7 @@
ep->com.cm_id = cm_id;
ep->com.qp = get_qhp(h, conn_param->qpn);
BUG_ON(!ep->com.qp);
- PDBG("%s qpn 0x%x qp %p cm_id %p\n", __FUNCTION__, conn_param->qpn,
+ PDBG("%s qpn 0x%x qp %p cm_id %p\n", __func__, conn_param->qpn,
ep->com.qp, cm_id);
/*
@@ -1835,7 +1835,7 @@
*/
ep->atid = cxgb3_alloc_atid(h->rdev.t3cdev_p, &t3c_client, ep);
if (ep->atid == -1) {
- printk(KERN_ERR MOD "%s - cannot alloc atid.\n", __FUNCTION__);
+ printk(KERN_ERR MOD "%s - cannot alloc atid.\n", __func__);
err = -ENOMEM;
goto fail2;
}
@@ -1847,7 +1847,7 @@
cm_id->local_addr.sin_port,
cm_id->remote_addr.sin_port, IPTOS_LOWDELAY);
if (!rt) {
- printk(KERN_ERR MOD "%s - cannot find route.\n", __FUNCTION__);
+ printk(KERN_ERR MOD "%s - cannot find route.\n", __func__);
err = -EHOSTUNREACH;
goto fail3;
}
@@ -1857,7 +1857,7 @@
ep->l2t = t3_l2t_get(ep->com.tdev, ep->dst->neighbour,
ep->dst->neighbour->dev);
if (!ep->l2t) {
- printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __FUNCTION__);
+ printk(KERN_ERR MOD "%s - cannot alloc l2e.\n", __func__);
err = -ENOMEM;
goto fail4;
}
@@ -1894,11 +1894,11 @@
ep = alloc_ep(sizeof(*ep), GFP_KERNEL);
if (!ep) {
- printk(KERN_ERR MOD "%s - cannot alloc ep.\n", __FUNCTION__);
+ printk(KERN_ERR MOD "%s - cannot alloc ep.\n", __func__);
err = -ENOMEM;
goto fail1;
}
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
ep->com.tdev = h->rdev.t3cdev_p;
cm_id->add_ref(cm_id);
ep->com.cm_id = cm_id;
@@ -1910,7 +1910,7 @@
*/
ep->stid = cxgb3_alloc_stid(h->rdev.t3cdev_p, &t3c_client, ep);
if (ep->stid == -1) {
- printk(KERN_ERR MOD "%s - cannot alloc atid.\n", __FUNCTION__);
+ printk(KERN_ERR MOD "%s - cannot alloc atid.\n", __func__);
err = -ENOMEM;
goto fail2;
}
@@ -1942,7 +1942,7 @@
int err;
struct iwch_listen_ep *ep = to_listen_ep(cm_id);
- PDBG("%s ep %p\n", __FUNCTION__, ep);
+ PDBG("%s ep %p\n", __func__, ep);
might_sleep();
state_set(&ep->com, DEAD);
@@ -1965,11 +1965,11 @@
spin_lock_irqsave(&ep->com.lock, flags);
- PDBG("%s ep %p state %s, abrupt %d\n", __FUNCTION__, ep,
+ PDBG("%s ep %p state %s, abrupt %d\n", __func__, ep,
states[ep->com.state], abrupt);
if (ep->com.state == DEAD) {
- PDBG("%s already dead ep %p\n", __FUNCTION__, ep);
+ PDBG("%s already dead ep %p\n", __func__, ep);
goto out;
}
@@ -2020,7 +2020,7 @@
if (ep->dst != old)
return 0;
- PDBG("%s ep %p redirect to dst %p l2t %p\n", __FUNCTION__, ep, new,
+ PDBG("%s ep %p redirect to dst %p l2t %p\n", __func__, ep, new,
l2t);
dst_hold(new);
l2t_release(L2DATA(ep->com.tdev), ep->l2t);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.h b/drivers/infiniband/hw/cxgb3/iwch_cm.h
index 6107e7c..2bb7fbd 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.h
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.h
@@ -54,13 +54,13 @@
#define MPA_FLAGS_MASK 0xE0
#define put_ep(ep) { \
- PDBG("put_ep (via %s:%u) ep %p refcnt %d\n", __FUNCTION__, __LINE__, \
+ PDBG("put_ep (via %s:%u) ep %p refcnt %d\n", __func__, __LINE__, \
ep, atomic_read(&((ep)->kref.refcount))); \
kref_put(&((ep)->kref), __free_ep); \
}
#define get_ep(ep) { \
- PDBG("get_ep (via %s:%u) ep %p, refcnt %d\n", __FUNCTION__, __LINE__, \
+ PDBG("get_ep (via %s:%u) ep %p, refcnt %d\n", __func__, __LINE__, \
ep, atomic_read(&((ep)->kref.refcount))); \
kref_get(&((ep)->kref)); \
}
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cq.c b/drivers/infiniband/hw/cxgb3/iwch_cq.c
index d7624c1..4ee8ccd 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cq.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cq.c
@@ -67,7 +67,7 @@
ret = cxio_poll_cq(wq, &(chp->cq), &cqe, &cqe_flushed, &cookie,
&credit);
if (t3a_device(chp->rhp) && credit) {
- PDBG("%s updating %d cq credits on id %d\n", __FUNCTION__,
+ PDBG("%s updating %d cq credits on id %d\n", __func__,
credit, chp->cq.cqid);
cxio_hal_cq_op(&rhp->rdev, &chp->cq, CQ_CREDIT_UPDATE, credit);
}
@@ -83,7 +83,7 @@
wc->vendor_err = CQE_STATUS(cqe);
PDBG("%s qpid 0x%x type %d opcode %d status 0x%x wrid hi 0x%x "
- "lo 0x%x cookie 0x%llx\n", __FUNCTION__,
+ "lo 0x%x cookie 0x%llx\n", __func__,
CQE_QPID(cqe), CQE_TYPE(cqe),
CQE_OPCODE(cqe), CQE_STATUS(cqe), CQE_WRID_HI(cqe),
CQE_WRID_LOW(cqe), (unsigned long long) cookie);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_ev.c b/drivers/infiniband/hw/cxgb3/iwch_ev.c
index b406766..7b67a67 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_ev.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_ev.c
@@ -52,7 +52,7 @@
if (!qhp) {
printk(KERN_ERR "%s unaffiliated error 0x%x qpid 0x%x\n",
- __FUNCTION__, CQE_STATUS(rsp_msg->cqe),
+ __func__, CQE_STATUS(rsp_msg->cqe),
CQE_QPID(rsp_msg->cqe));
spin_unlock(&rnicp->lock);
return;
@@ -61,14 +61,14 @@
if ((qhp->attr.state == IWCH_QP_STATE_ERROR) ||
(qhp->attr.state == IWCH_QP_STATE_TERMINATE)) {
PDBG("%s AE received after RTS - "
- "qp state %d qpid 0x%x status 0x%x\n", __FUNCTION__,
+ "qp state %d qpid 0x%x status 0x%x\n", __func__,
qhp->attr.state, qhp->wq.qpid, CQE_STATUS(rsp_msg->cqe));
spin_unlock(&rnicp->lock);
return;
}
printk(KERN_ERR "%s - AE qpid 0x%x opcode %d status 0x%x "
- "type %d wrid.hi 0x%x wrid.lo 0x%x \n", __FUNCTION__,
+ "type %d wrid.hi 0x%x wrid.lo 0x%x \n", __func__,
CQE_QPID(rsp_msg->cqe), CQE_OPCODE(rsp_msg->cqe),
CQE_STATUS(rsp_msg->cqe), CQE_TYPE(rsp_msg->cqe),
CQE_WRID_HI(rsp_msg->cqe), CQE_WRID_LOW(rsp_msg->cqe));
@@ -132,10 +132,10 @@
(CQE_STATUS(rsp_msg->cqe) == 0)) {
if (SQ_TYPE(rsp_msg->cqe)) {
PDBG("%s QPID 0x%x ep %p disconnecting\n",
- __FUNCTION__, qhp->wq.qpid, qhp->ep);
+ __func__, qhp->wq.qpid, qhp->ep);
iwch_ep_disconnect(qhp->ep, 0, GFP_ATOMIC);
} else {
- PDBG("%s post REQ_ERR AE QPID 0x%x\n", __FUNCTION__,
+ PDBG("%s post REQ_ERR AE QPID 0x%x\n", __func__,
qhp->wq.qpid);
post_qp_event(rnicp, chp, rsp_msg,
IB_EVENT_QP_REQ_ERR, 0);
@@ -180,7 +180,7 @@
case TPT_ERR_INVALIDATE_SHARED_MR:
case TPT_ERR_INVALIDATE_MR_WITH_MW_BOUND:
printk(KERN_ERR "%s - CQE Err qpid 0x%x opcode %d status 0x%x "
- "type %d wrid.hi 0x%x wrid.lo 0x%x \n", __FUNCTION__,
+ "type %d wrid.hi 0x%x wrid.lo 0x%x \n", __func__,
CQE_QPID(rsp_msg->cqe), CQE_OPCODE(rsp_msg->cqe),
CQE_STATUS(rsp_msg->cqe), CQE_TYPE(rsp_msg->cqe),
CQE_WRID_HI(rsp_msg->cqe), CQE_WRID_LOW(rsp_msg->cqe));
diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c
index b8797c6..58c3d61 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_mem.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c
@@ -62,7 +62,7 @@
mmid = stag >> 8;
mhp->ibmr.rkey = mhp->ibmr.lkey = stag;
insert_handle(rhp, &rhp->mmidr, mhp, mmid);
- PDBG("%s mmid 0x%x mhp %p\n", __FUNCTION__, mmid, mhp);
+ PDBG("%s mmid 0x%x mhp %p\n", __func__, mmid, mhp);
return 0;
}
@@ -96,7 +96,7 @@
mmid = stag >> 8;
mhp->ibmr.rkey = mhp->ibmr.lkey = stag;
insert_handle(rhp, &rhp->mmidr, mhp, mmid);
- PDBG("%s mmid 0x%x mhp %p\n", __FUNCTION__, mmid, mhp);
+ PDBG("%s mmid 0x%x mhp %p\n", __func__, mmid, mhp);
return 0;
}
@@ -163,7 +163,7 @@
((u64) j << *shift));
PDBG("%s va 0x%llx mask 0x%llx shift %d len %lld pbl_size %d\n",
- __FUNCTION__, (unsigned long long) *iova_start,
+ __func__, (unsigned long long) *iova_start,
(unsigned long long) mask, *shift, (unsigned long long) *total_size,
*npages);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index b2ea921..ca72654 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -101,7 +101,7 @@
struct iwch_ucontext *ucontext = to_iwch_ucontext(context);
struct iwch_mm_entry *mm, *tmp;
- PDBG("%s context %p\n", __FUNCTION__, context);
+ PDBG("%s context %p\n", __func__, context);
list_for_each_entry_safe(mm, tmp, &ucontext->mmaps, entry)
kfree(mm);
cxio_release_ucontext(&rhp->rdev, &ucontext->uctx);
@@ -115,7 +115,7 @@
struct iwch_ucontext *context;
struct iwch_dev *rhp = to_iwch_dev(ibdev);
- PDBG("%s ibdev %p\n", __FUNCTION__, ibdev);
+ PDBG("%s ibdev %p\n", __func__, ibdev);
context = kzalloc(sizeof(*context), GFP_KERNEL);
if (!context)
return ERR_PTR(-ENOMEM);
@@ -129,7 +129,7 @@
{
struct iwch_cq *chp;
- PDBG("%s ib_cq %p\n", __FUNCTION__, ib_cq);
+ PDBG("%s ib_cq %p\n", __func__, ib_cq);
chp = to_iwch_cq(ib_cq);
remove_handle(chp->rhp, &chp->rhp->cqidr, chp->cq.cqid);
@@ -151,7 +151,7 @@
struct iwch_create_cq_req ureq;
struct iwch_ucontext *ucontext = NULL;
- PDBG("%s ib_dev %p entries %d\n", __FUNCTION__, ibdev, entries);
+ PDBG("%s ib_dev %p entries %d\n", __func__, ibdev, entries);
rhp = to_iwch_dev(ibdev);
chp = kzalloc(sizeof(*chp), GFP_KERNEL);
if (!chp)
@@ -233,7 +233,7 @@
struct t3_cq oldcq, newcq;
int ret;
- PDBG("%s ib_cq %p cqe %d\n", __FUNCTION__, cq, cqe);
+ PDBG("%s ib_cq %p cqe %d\n", __func__, cq, cqe);
/* We don't downsize... */
if (cqe <= cq->cqe)
@@ -281,7 +281,7 @@
ret = cxio_destroy_cq(&chp->rhp->rdev, &oldcq);
if (ret) {
printk(KERN_ERR MOD "%s - cxio_destroy_cq failed %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
}
/* add user hooks here */
@@ -316,7 +316,7 @@
chp->cq.rptr = rptr;
} else
spin_lock_irqsave(&chp->lock, flag);
- PDBG("%s rptr 0x%x\n", __FUNCTION__, chp->cq.rptr);
+ PDBG("%s rptr 0x%x\n", __func__, chp->cq.rptr);
err = cxio_hal_cq_op(&rhp->rdev, &chp->cq, cq_op, 0);
spin_unlock_irqrestore(&chp->lock, flag);
if (err < 0)
@@ -337,7 +337,7 @@
struct iwch_ucontext *ucontext;
u64 addr;
- PDBG("%s pgoff 0x%lx key 0x%x len %d\n", __FUNCTION__, vma->vm_pgoff,
+ PDBG("%s pgoff 0x%lx key 0x%x len %d\n", __func__, vma->vm_pgoff,
key, len);
if (vma->vm_start & (PAGE_SIZE-1)) {
@@ -390,7 +390,7 @@
php = to_iwch_pd(pd);
rhp = php->rhp;
- PDBG("%s ibpd %p pdid 0x%x\n", __FUNCTION__, pd, php->pdid);
+ PDBG("%s ibpd %p pdid 0x%x\n", __func__, pd, php->pdid);
cxio_hal_put_pdid(rhp->rdev.rscp, php->pdid);
kfree(php);
return 0;
@@ -404,7 +404,7 @@
u32 pdid;
struct iwch_dev *rhp;
- PDBG("%s ibdev %p\n", __FUNCTION__, ibdev);
+ PDBG("%s ibdev %p\n", __func__, ibdev);
rhp = (struct iwch_dev *) ibdev;
pdid = cxio_hal_get_pdid(rhp->rdev.rscp);
if (!pdid)
@@ -422,7 +422,7 @@
return ERR_PTR(-EFAULT);
}
}
- PDBG("%s pdid 0x%0x ptr 0x%p\n", __FUNCTION__, pdid, php);
+ PDBG("%s pdid 0x%0x ptr 0x%p\n", __func__, pdid, php);
return &php->ibpd;
}
@@ -432,7 +432,7 @@
struct iwch_mr *mhp;
u32 mmid;
- PDBG("%s ib_mr %p\n", __FUNCTION__, ib_mr);
+ PDBG("%s ib_mr %p\n", __func__, ib_mr);
/* There can be no memory windows */
if (atomic_read(&ib_mr->usecnt))
return -EINVAL;
@@ -447,7 +447,7 @@
kfree((void *) (unsigned long) mhp->kva);
if (mhp->umem)
ib_umem_release(mhp->umem);
- PDBG("%s mmid 0x%x ptr %p\n", __FUNCTION__, mmid, mhp);
+ PDBG("%s mmid 0x%x ptr %p\n", __func__, mmid, mhp);
kfree(mhp);
return 0;
}
@@ -467,7 +467,7 @@
struct iwch_mr *mhp;
int ret;
- PDBG("%s ib_pd %p\n", __FUNCTION__, pd);
+ PDBG("%s ib_pd %p\n", __func__, pd);
php = to_iwch_pd(pd);
rhp = php->rhp;
@@ -531,7 +531,7 @@
int npages;
int ret;
- PDBG("%s ib_mr %p ib_pd %p\n", __FUNCTION__, mr, pd);
+ PDBG("%s ib_mr %p ib_pd %p\n", __func__, mr, pd);
/* There can be no memory windows */
if (atomic_read(&mr->usecnt))
@@ -594,7 +594,7 @@
struct iwch_mr *mhp;
struct iwch_reg_user_mr_resp uresp;
- PDBG("%s ib_pd %p\n", __FUNCTION__, pd);
+ PDBG("%s ib_pd %p\n", __func__, pd);
php = to_iwch_pd(pd);
rhp = php->rhp;
@@ -649,7 +649,7 @@
if (udata && !t3a_device(rhp)) {
uresp.pbl_addr = (mhp->attr.pbl_addr -
rhp->rdev.rnic_info.pbl_base) >> 3;
- PDBG("%s user resp pbl_addr 0x%x\n", __FUNCTION__,
+ PDBG("%s user resp pbl_addr 0x%x\n", __func__,
uresp.pbl_addr);
if (ib_copy_to_udata(udata, &uresp, sizeof (uresp))) {
@@ -673,7 +673,7 @@
u64 kva;
struct ib_mr *ibmr;
- PDBG("%s ib_pd %p\n", __FUNCTION__, pd);
+ PDBG("%s ib_pd %p\n", __func__, pd);
/*
* T3 only supports 32 bits of size.
@@ -710,7 +710,7 @@
mhp->attr.stag = stag;
mmid = (stag) >> 8;
insert_handle(rhp, &rhp->mmidr, mhp, mmid);
- PDBG("%s mmid 0x%x mhp %p stag 0x%x\n", __FUNCTION__, mmid, mhp, stag);
+ PDBG("%s mmid 0x%x mhp %p stag 0x%x\n", __func__, mmid, mhp, stag);
return &(mhp->ibmw);
}
@@ -726,7 +726,7 @@
cxio_deallocate_window(&rhp->rdev, mhp->attr.stag);
remove_handle(rhp, &rhp->mmidr, mmid);
kfree(mhp);
- PDBG("%s ib_mw %p mmid 0x%x ptr %p\n", __FUNCTION__, mw, mmid, mhp);
+ PDBG("%s ib_mw %p mmid 0x%x ptr %p\n", __func__, mw, mmid, mhp);
return 0;
}
@@ -754,7 +754,7 @@
cxio_destroy_qp(&rhp->rdev, &qhp->wq,
ucontext ? &ucontext->uctx : &rhp->rdev.uctx);
- PDBG("%s ib_qp %p qpid 0x%0x qhp %p\n", __FUNCTION__,
+ PDBG("%s ib_qp %p qpid 0x%0x qhp %p\n", __func__,
ib_qp, qhp->wq.qpid, qhp);
kfree(qhp);
return 0;
@@ -773,7 +773,7 @@
int wqsize, sqsize, rqsize;
struct iwch_ucontext *ucontext;
- PDBG("%s ib_pd %p\n", __FUNCTION__, pd);
+ PDBG("%s ib_pd %p\n", __func__, pd);
if (attrs->qp_type != IB_QPT_RC)
return ERR_PTR(-EINVAL);
php = to_iwch_pd(pd);
@@ -805,7 +805,7 @@
*/
sqsize = roundup_pow_of_two(attrs->cap.max_send_wr);
wqsize = roundup_pow_of_two(rqsize + sqsize);
- PDBG("%s wqsize %d sqsize %d rqsize %d\n", __FUNCTION__,
+ PDBG("%s wqsize %d sqsize %d rqsize %d\n", __func__,
wqsize, sqsize, rqsize);
qhp = kzalloc(sizeof(*qhp), GFP_KERNEL);
if (!qhp)
@@ -898,7 +898,7 @@
init_timer(&(qhp->timer));
PDBG("%s sq_num_entries %d, rq_num_entries %d "
"qpid 0x%0x qhp %p dma_addr 0x%llx size %d\n",
- __FUNCTION__, qhp->attr.sq_num_entries, qhp->attr.rq_num_entries,
+ __func__, qhp->attr.sq_num_entries, qhp->attr.rq_num_entries,
qhp->wq.qpid, qhp, (unsigned long long) qhp->wq.dma_addr,
1 << qhp->wq.size_log2);
return &qhp->ibqp;
@@ -912,7 +912,7 @@
enum iwch_qp_attr_mask mask = 0;
struct iwch_qp_attributes attrs;
- PDBG("%s ib_qp %p\n", __FUNCTION__, ibqp);
+ PDBG("%s ib_qp %p\n", __func__, ibqp);
/* iwarp does not support the RTR state */
if ((attr_mask & IB_QP_STATE) && (attr->qp_state == IB_QPS_RTR))
@@ -945,20 +945,20 @@
void iwch_qp_add_ref(struct ib_qp *qp)
{
- PDBG("%s ib_qp %p\n", __FUNCTION__, qp);
+ PDBG("%s ib_qp %p\n", __func__, qp);
atomic_inc(&(to_iwch_qp(qp)->refcnt));
}
void iwch_qp_rem_ref(struct ib_qp *qp)
{
- PDBG("%s ib_qp %p\n", __FUNCTION__, qp);
+ PDBG("%s ib_qp %p\n", __func__, qp);
if (atomic_dec_and_test(&(to_iwch_qp(qp)->refcnt)))
wake_up(&(to_iwch_qp(qp)->wait));
}
static struct ib_qp *iwch_get_qp(struct ib_device *dev, int qpn)
{
- PDBG("%s ib_dev %p qpn 0x%x\n", __FUNCTION__, dev, qpn);
+ PDBG("%s ib_dev %p qpn 0x%x\n", __func__, dev, qpn);
return (struct ib_qp *)get_qhp(to_iwch_dev(dev), qpn);
}
@@ -966,7 +966,7 @@
static int iwch_query_pkey(struct ib_device *ibdev,
u8 port, u16 index, u16 * pkey)
{
- PDBG("%s ibdev %p\n", __FUNCTION__, ibdev);
+ PDBG("%s ibdev %p\n", __func__, ibdev);
*pkey = 0;
return 0;
}
@@ -977,7 +977,7 @@
struct iwch_dev *dev;
PDBG("%s ibdev %p, port %d, index %d, gid %p\n",
- __FUNCTION__, ibdev, port, index, gid);
+ __func__, ibdev, port, index, gid);
dev = to_iwch_dev(ibdev);
BUG_ON(port == 0 || port > 2);
memset(&(gid->raw[0]), 0, sizeof(gid->raw));
@@ -990,7 +990,7 @@
{
struct iwch_dev *dev;
- PDBG("%s ibdev %p\n", __FUNCTION__, ibdev);
+ PDBG("%s ibdev %p\n", __func__, ibdev);
dev = to_iwch_dev(ibdev);
memset(props, 0, sizeof *props);
@@ -1017,7 +1017,7 @@
static int iwch_query_port(struct ib_device *ibdev,
u8 port, struct ib_port_attr *props)
{
- PDBG("%s ibdev %p\n", __FUNCTION__, ibdev);
+ PDBG("%s ibdev %p\n", __func__, ibdev);
props->max_mtu = IB_MTU_4096;
props->lid = 0;
props->lmc = 0;
@@ -1045,7 +1045,7 @@
{
struct iwch_dev *dev = container_of(cdev, struct iwch_dev,
ibdev.class_dev);
- PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev);
+ PDBG("%s class dev 0x%p\n", __func__, cdev);
return sprintf(buf, "%d\n", dev->rdev.t3cdev_p->type);
}
@@ -1056,7 +1056,7 @@
struct ethtool_drvinfo info;
struct net_device *lldev = dev->rdev.t3cdev_p->lldev;
- PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev);
+ PDBG("%s class dev 0x%p\n", __func__, cdev);
rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
rtnl_unlock();
@@ -1070,7 +1070,7 @@
struct ethtool_drvinfo info;
struct net_device *lldev = dev->rdev.t3cdev_p->lldev;
- PDBG("%s class dev 0x%p\n", __FUNCTION__, cdev);
+ PDBG("%s class dev 0x%p\n", __func__, cdev);
rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
rtnl_unlock();
@@ -1081,7 +1081,7 @@
{
struct iwch_dev *dev = container_of(cdev, struct iwch_dev,
ibdev.class_dev);
- PDBG("%s class dev 0x%p\n", __FUNCTION__, dev);
+ PDBG("%s class dev 0x%p\n", __func__, dev);
return sprintf(buf, "%x.%x\n", dev->rdev.rnic_info.pdev->vendor,
dev->rdev.rnic_info.pdev->device);
}
@@ -1103,14 +1103,13 @@
int ret;
int i;
- PDBG("%s iwch_dev %p\n", __FUNCTION__, dev);
+ PDBG("%s iwch_dev %p\n", __func__, dev);
strlcpy(dev->ibdev.name, "cxgb3_%d", IB_DEVICE_NAME_MAX);
memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid));
memcpy(&dev->ibdev.node_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6);
dev->ibdev.owner = THIS_MODULE;
dev->device_cap_flags =
- (IB_DEVICE_ZERO_STAG |
- IB_DEVICE_SEND_W_INV | IB_DEVICE_MEM_WINDOW);
+ (IB_DEVICE_ZERO_STAG | IB_DEVICE_MEM_WINDOW);
dev->ibdev.uverbs_cmd_mask =
(1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
@@ -1207,7 +1206,7 @@
{
int i;
- PDBG("%s iwch_dev %p\n", __FUNCTION__, dev);
+ PDBG("%s iwch_dev %p\n", __func__, dev);
for (i = 0; i < ARRAY_SIZE(iwch_class_attributes); ++i)
class_device_remove_file(&dev->ibdev.class_dev,
iwch_class_attributes[i]);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h
index 48833f3..61356f9 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.h
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h
@@ -213,7 +213,7 @@
if (mm->key == key && mm->len == len) {
list_del_init(&mm->entry);
spin_unlock(&ucontext->mmap_lock);
- PDBG("%s key 0x%x addr 0x%llx len %d\n", __FUNCTION__,
+ PDBG("%s key 0x%x addr 0x%llx len %d\n", __func__,
key, (unsigned long long) mm->addr, mm->len);
return mm;
}
@@ -226,7 +226,7 @@
struct iwch_mm_entry *mm)
{
spin_lock(&ucontext->mmap_lock);
- PDBG("%s key 0x%x addr 0x%llx len %d\n", __FUNCTION__,
+ PDBG("%s key 0x%x addr 0x%llx len %d\n", __func__,
mm->key, (unsigned long long) mm->addr, mm->len);
list_add_tail(&mm->entry, &ucontext->mmaps);
spin_unlock(&ucontext->mmap_lock);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index ea2cdd7..8891c3b 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -72,7 +72,7 @@
wqe->send.reserved[2] = 0;
if (wr->opcode == IB_WR_SEND_WITH_IMM) {
plen = 4;
- wqe->send.sgl[0].stag = wr->imm_data;
+ wqe->send.sgl[0].stag = wr->ex.imm_data;
wqe->send.sgl[0].len = __constant_cpu_to_be32(0);
wqe->send.num_sgle = __constant_cpu_to_be32(0);
*flit_cnt = 5;
@@ -112,7 +112,7 @@
if (wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) {
plen = 4;
- wqe->write.sgl[0].stag = wr->imm_data;
+ wqe->write.sgl[0].stag = wr->ex.imm_data;
wqe->write.sgl[0].len = __constant_cpu_to_be32(0);
wqe->write.num_sgle = __constant_cpu_to_be32(0);
*flit_cnt = 6;
@@ -168,30 +168,30 @@
mhp = get_mhp(rhp, (sg_list[i].lkey) >> 8);
if (!mhp) {
- PDBG("%s %d\n", __FUNCTION__, __LINE__);
+ PDBG("%s %d\n", __func__, __LINE__);
return -EIO;
}
if (!mhp->attr.state) {
- PDBG("%s %d\n", __FUNCTION__, __LINE__);
+ PDBG("%s %d\n", __func__, __LINE__);
return -EIO;
}
if (mhp->attr.zbva) {
- PDBG("%s %d\n", __FUNCTION__, __LINE__);
+ PDBG("%s %d\n", __func__, __LINE__);
return -EIO;
}
if (sg_list[i].addr < mhp->attr.va_fbo) {
- PDBG("%s %d\n", __FUNCTION__, __LINE__);
+ PDBG("%s %d\n", __func__, __LINE__);
return -EINVAL;
}
if (sg_list[i].addr + ((u64) sg_list[i].length) <
sg_list[i].addr) {
- PDBG("%s %d\n", __FUNCTION__, __LINE__);
+ PDBG("%s %d\n", __func__, __LINE__);
return -EINVAL;
}
if (sg_list[i].addr + ((u64) sg_list[i].length) >
mhp->attr.va_fbo + ((u64) mhp->attr.len)) {
- PDBG("%s %d\n", __FUNCTION__, __LINE__);
+ PDBG("%s %d\n", __func__, __LINE__);
return -EINVAL;
}
offset = sg_list[i].addr - mhp->attr.va_fbo;
@@ -290,7 +290,7 @@
qhp->wq.oldest_read = sqp;
break;
default:
- PDBG("%s post of type=%d TBD!\n", __FUNCTION__,
+ PDBG("%s post of type=%d TBD!\n", __func__,
wr->opcode);
err = -EINVAL;
}
@@ -309,7 +309,7 @@
Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2),
0, t3_wr_flit_cnt);
PDBG("%s cookie 0x%llx wq idx 0x%x swsq idx %ld opcode %d\n",
- __FUNCTION__, (unsigned long long) wr->wr_id, idx,
+ __func__, (unsigned long long) wr->wr_id, idx,
Q_PTR2IDX(qhp->wq.sq_wptr, qhp->wq.sq_size_log2),
sqp->opcode);
wr = wr->next;
@@ -361,7 +361,7 @@
Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2),
0, sizeof(struct t3_receive_wr) >> 3);
PDBG("%s cookie 0x%llx idx 0x%x rq_wptr 0x%x rw_rptr 0x%x "
- "wqe %p \n", __FUNCTION__, (unsigned long long) wr->wr_id,
+ "wqe %p \n", __func__, (unsigned long long) wr->wr_id,
idx, qhp->wq.rq_wptr, qhp->wq.rq_rptr, wqe);
++(qhp->wq.rq_wptr);
++(qhp->wq.wptr);
@@ -407,7 +407,7 @@
return -ENOMEM;
}
idx = Q_PTR2IDX(qhp->wq.wptr, qhp->wq.size_log2);
- PDBG("%s: idx 0x%0x, mw 0x%p, mw_bind 0x%p\n", __FUNCTION__, idx,
+ PDBG("%s: idx 0x%0x, mw 0x%p, mw_bind 0x%p\n", __func__, idx,
mw, mw_bind);
wqe = (union t3_wr *) (qhp->wq.queue + idx);
@@ -595,10 +595,10 @@
struct terminate_message *term;
struct sk_buff *skb;
- PDBG("%s %d\n", __FUNCTION__, __LINE__);
+ PDBG("%s %d\n", __func__, __LINE__);
skb = alloc_skb(40, GFP_ATOMIC);
if (!skb) {
- printk(KERN_ERR "%s cannot send TERMINATE!\n", __FUNCTION__);
+ printk(KERN_ERR "%s cannot send TERMINATE!\n", __func__);
return -ENOMEM;
}
wqe = (union t3_wr *)skb_put(skb, 40);
@@ -629,7 +629,7 @@
rchp = get_chp(qhp->rhp, qhp->attr.rcq);
schp = get_chp(qhp->rhp, qhp->attr.scq);
- PDBG("%s qhp %p rchp %p schp %p\n", __FUNCTION__, qhp, rchp, schp);
+ PDBG("%s qhp %p rchp %p schp %p\n", __func__, qhp, rchp, schp);
/* take a ref on the qhp since we must release the lock */
atomic_inc(&qhp->refcnt);
spin_unlock_irqrestore(&qhp->lock, *flag);
@@ -720,11 +720,11 @@
init_attr.flags |= capable(CAP_NET_BIND_SERVICE) ? PRIV_QP : 0;
init_attr.irs = qhp->ep->rcv_seq;
PDBG("%s init_attr.rq_addr 0x%x init_attr.rq_size = %d "
- "flags 0x%x qpcaps 0x%x\n", __FUNCTION__,
+ "flags 0x%x qpcaps 0x%x\n", __func__,
init_attr.rq_addr, init_attr.rq_size,
init_attr.flags, init_attr.qpcaps);
ret = cxio_rdma_init(&rhp->rdev, &init_attr);
- PDBG("%s ret %d\n", __FUNCTION__, ret);
+ PDBG("%s ret %d\n", __func__, ret);
return ret;
}
@@ -742,7 +742,7 @@
int free = 0;
struct iwch_ep *ep = NULL;
- PDBG("%s qhp %p qpid 0x%x ep %p state %d -> %d\n", __FUNCTION__,
+ PDBG("%s qhp %p qpid 0x%x ep %p state %d -> %d\n", __func__,
qhp, qhp->wq.qpid, qhp->ep, qhp->attr.state,
(mask & IWCH_QP_ATTR_NEXT_STATE) ? attrs->next_state : -1);
@@ -899,14 +899,14 @@
break;
default:
printk(KERN_ERR "%s in a bad state %d\n",
- __FUNCTION__, qhp->attr.state);
+ __func__, qhp->attr.state);
ret = -EINVAL;
goto err;
break;
}
goto out;
err:
- PDBG("%s disassociating ep %p qpid 0x%x\n", __FUNCTION__, qhp->ep,
+ PDBG("%s disassociating ep %p qpid 0x%x\n", __func__, qhp->ep,
qhp->wq.qpid);
/* disassociate the LLP connection */
@@ -939,7 +939,7 @@
if (free)
put_ep(&ep->com);
- PDBG("%s exit state %d\n", __FUNCTION__, qhp->attr.state);
+ PDBG("%s exit state %d\n", __func__, qhp->attr.state);
return ret;
}
diff --git a/drivers/infiniband/hw/ehca/ehca_av.c b/drivers/infiniband/hw/ehca/ehca_av.c
index 194c1c3..56735ea 100644
--- a/drivers/infiniband/hw/ehca/ehca_av.c
+++ b/drivers/infiniband/hw/ehca/ehca_av.c
@@ -41,9 +41,6 @@
* POSSIBILITY OF SUCH DAMAGE.
*/
-
-#include <asm/current.h>
-
#include "ehca_tools.h"
#include "ehca_iverbs.h"
#include "hcp_if.h"
@@ -170,17 +167,8 @@
{
struct ehca_av *av;
struct ehca_ud_av new_ehca_av;
- struct ehca_pd *my_pd = container_of(ah->pd, struct ehca_pd, ib_pd);
struct ehca_shca *shca = container_of(ah->pd->device, struct ehca_shca,
ib_device);
- u32 cur_pid = current->tgid;
-
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- my_pd->ownpid != cur_pid) {
- ehca_err(ah->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- return -EINVAL;
- }
memset(&new_ehca_av, 0, sizeof(new_ehca_av));
new_ehca_av.sl = ah_attr->sl;
@@ -242,15 +230,6 @@
int ehca_query_ah(struct ib_ah *ah, struct ib_ah_attr *ah_attr)
{
struct ehca_av *av = container_of(ah, struct ehca_av, ib_ah);
- struct ehca_pd *my_pd = container_of(ah->pd, struct ehca_pd, ib_pd);
- u32 cur_pid = current->tgid;
-
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- my_pd->ownpid != cur_pid) {
- ehca_err(ah->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- return -EINVAL;
- }
memcpy(&ah_attr->grh.dgid, &av->av.grh.word_3,
sizeof(ah_attr->grh.dgid));
@@ -273,16 +252,6 @@
int ehca_destroy_ah(struct ib_ah *ah)
{
- struct ehca_pd *my_pd = container_of(ah->pd, struct ehca_pd, ib_pd);
- u32 cur_pid = current->tgid;
-
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- my_pd->ownpid != cur_pid) {
- ehca_err(ah->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- return -EINVAL;
- }
-
kmem_cache_free(av_cache, container_of(ah, struct ehca_av, ib_ah));
return 0;
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index 92cce8a..0d13fe0 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -132,7 +132,6 @@
struct ehca_pd {
struct ib_pd ib_pd;
struct ipz_pd fw_pd;
- u32 ownpid;
/* small queue mgmt */
struct mutex lock;
struct list_head free[2];
@@ -215,7 +214,6 @@
atomic_t nr_events; /* #events seen */
wait_queue_head_t wait_completion;
spinlock_t task_lock;
- u32 ownpid;
/* mmap counter for resources mapped into user space */
u32 mm_count_queue;
u32 mm_count_galpa;
diff --git a/drivers/infiniband/hw/ehca/ehca_cq.c b/drivers/infiniband/hw/ehca/ehca_cq.c
index 0467c15..ec0cfcf 100644
--- a/drivers/infiniband/hw/ehca/ehca_cq.c
+++ b/drivers/infiniband/hw/ehca/ehca_cq.c
@@ -43,8 +43,6 @@
* POSSIBILITY OF SUCH DAMAGE.
*/
-#include <asm/current.h>
-
#include "ehca_iverbs.h"
#include "ehca_classes.h"
#include "ehca_irq.h"
@@ -148,7 +146,6 @@
spin_lock_init(&my_cq->task_lock);
atomic_set(&my_cq->nr_events, 0);
init_waitqueue_head(&my_cq->wait_completion);
- my_cq->ownpid = current->tgid;
cq = &my_cq->ib_cq;
@@ -320,7 +317,6 @@
struct ehca_shca *shca = container_of(device, struct ehca_shca,
ib_device);
struct ipz_adapter_handle adapter_handle = shca->ipz_hca_handle;
- u32 cur_pid = current->tgid;
unsigned long flags;
if (cq->uobject) {
@@ -329,12 +325,6 @@
"user space cq_num=%x", my_cq->cq_number);
return -EINVAL;
}
- if (my_cq->ownpid != cur_pid) {
- ehca_err(device, "Invalid caller pid=%x ownpid=%x "
- "cq_num=%x",
- cur_pid, my_cq->ownpid, my_cq->cq_number);
- return -EINVAL;
- }
}
/*
@@ -374,15 +364,6 @@
int ehca_resize_cq(struct ib_cq *cq, int cqe, struct ib_udata *udata)
{
- struct ehca_cq *my_cq = container_of(cq, struct ehca_cq, ib_cq);
- u32 cur_pid = current->tgid;
-
- if (cq->uobject && my_cq->ownpid != cur_pid) {
- ehca_err(cq->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_cq->ownpid);
- return -EINVAL;
- }
-
/* TODO: proper resize needs to be done */
ehca_err(cq->device, "not implemented yet");
diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index 5bd7b59..2515cbd 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -43,6 +43,11 @@
#include "ehca_iverbs.h"
#include "hcp_if.h"
+static unsigned int limit_uint(unsigned int value)
+{
+ return min_t(unsigned int, value, INT_MAX);
+}
+
int ehca_query_device(struct ib_device *ibdev, struct ib_device_attr *props)
{
int i, ret = 0;
@@ -83,37 +88,40 @@
props->vendor_id = rblock->vendor_id >> 8;
props->vendor_part_id = rblock->vendor_part_id >> 16;
props->hw_ver = rblock->hw_ver;
- props->max_qp = min_t(unsigned, rblock->max_qp, INT_MAX);
- props->max_qp_wr = min_t(unsigned, rblock->max_wqes_wq, INT_MAX);
- props->max_sge = min_t(unsigned, rblock->max_sge, INT_MAX);
- props->max_sge_rd = min_t(unsigned, rblock->max_sge_rd, INT_MAX);
- props->max_cq = min_t(unsigned, rblock->max_cq, INT_MAX);
- props->max_cqe = min_t(unsigned, rblock->max_cqe, INT_MAX);
- props->max_mr = min_t(unsigned, rblock->max_mr, INT_MAX);
- props->max_mw = min_t(unsigned, rblock->max_mw, INT_MAX);
- props->max_pd = min_t(unsigned, rblock->max_pd, INT_MAX);
- props->max_ah = min_t(unsigned, rblock->max_ah, INT_MAX);
- props->max_fmr = min_t(unsigned, rblock->max_mr, INT_MAX);
+ props->max_qp = limit_uint(rblock->max_qp);
+ props->max_qp_wr = limit_uint(rblock->max_wqes_wq);
+ props->max_sge = limit_uint(rblock->max_sge);
+ props->max_sge_rd = limit_uint(rblock->max_sge_rd);
+ props->max_cq = limit_uint(rblock->max_cq);
+ props->max_cqe = limit_uint(rblock->max_cqe);
+ props->max_mr = limit_uint(rblock->max_mr);
+ props->max_mw = limit_uint(rblock->max_mw);
+ props->max_pd = limit_uint(rblock->max_pd);
+ props->max_ah = limit_uint(rblock->max_ah);
+ props->max_ee = limit_uint(rblock->max_rd_ee_context);
+ props->max_rdd = limit_uint(rblock->max_rd_domain);
+ props->max_fmr = limit_uint(rblock->max_mr);
+ props->local_ca_ack_delay = limit_uint(rblock->local_ca_ack_delay);
+ props->max_qp_rd_atom = limit_uint(rblock->max_rr_qp);
+ props->max_ee_rd_atom = limit_uint(rblock->max_rr_ee_context);
+ props->max_res_rd_atom = limit_uint(rblock->max_rr_hca);
+ props->max_qp_init_rd_atom = limit_uint(rblock->max_act_wqs_qp);
+ props->max_ee_init_rd_atom = limit_uint(rblock->max_act_wqs_ee_context);
if (EHCA_BMASK_GET(HCA_CAP_SRQ, shca->hca_cap)) {
- props->max_srq = props->max_qp;
- props->max_srq_wr = props->max_qp_wr;
+ props->max_srq = limit_uint(props->max_qp);
+ props->max_srq_wr = limit_uint(props->max_qp_wr);
props->max_srq_sge = 3;
}
- props->max_pkeys = 16;
- props->local_ca_ack_delay
- = rblock->local_ca_ack_delay;
- props->max_raw_ipv6_qp
- = min_t(unsigned, rblock->max_raw_ipv6_qp, INT_MAX);
- props->max_raw_ethy_qp
- = min_t(unsigned, rblock->max_raw_ethy_qp, INT_MAX);
- props->max_mcast_grp
- = min_t(unsigned, rblock->max_mcast_grp, INT_MAX);
- props->max_mcast_qp_attach
- = min_t(unsigned, rblock->max_mcast_qp_attach, INT_MAX);
+ props->max_pkeys = 16;
+ props->local_ca_ack_delay = limit_uint(rblock->local_ca_ack_delay);
+ props->max_raw_ipv6_qp = limit_uint(rblock->max_raw_ipv6_qp);
+ props->max_raw_ethy_qp = limit_uint(rblock->max_raw_ethy_qp);
+ props->max_mcast_grp = limit_uint(rblock->max_mcast_grp);
+ props->max_mcast_qp_attach = limit_uint(rblock->max_mcast_qp_attach);
props->max_total_mcast_qp_attach
- = min_t(unsigned, rblock->max_total_mcast_qp_attach, INT_MAX);
+ = limit_uint(rblock->max_total_mcast_qp_attach);
/* translate device capabilities */
props->device_cap_flags = IB_DEVICE_SYS_IMAGE_GUID |
@@ -128,6 +136,46 @@
return ret;
}
+static int map_mtu(struct ehca_shca *shca, u32 fw_mtu)
+{
+ switch (fw_mtu) {
+ case 0x1:
+ return IB_MTU_256;
+ case 0x2:
+ return IB_MTU_512;
+ case 0x3:
+ return IB_MTU_1024;
+ case 0x4:
+ return IB_MTU_2048;
+ case 0x5:
+ return IB_MTU_4096;
+ default:
+ ehca_err(&shca->ib_device, "Unknown MTU size: %x.",
+ fw_mtu);
+ return 0;
+ }
+}
+
+static int map_number_of_vls(struct ehca_shca *shca, u32 vl_cap)
+{
+ switch (vl_cap) {
+ case 0x1:
+ return 1;
+ case 0x2:
+ return 2;
+ case 0x3:
+ return 4;
+ case 0x4:
+ return 8;
+ case 0x5:
+ return 15;
+ default:
+ ehca_err(&shca->ib_device, "invalid Vl Capability: %x.",
+ vl_cap);
+ return 0;
+ }
+}
+
int ehca_query_port(struct ib_device *ibdev,
u8 port, struct ib_port_attr *props)
{
@@ -152,31 +200,13 @@
memset(props, 0, sizeof(struct ib_port_attr));
- switch (rblock->max_mtu) {
- case 0x1:
- props->active_mtu = props->max_mtu = IB_MTU_256;
- break;
- case 0x2:
- props->active_mtu = props->max_mtu = IB_MTU_512;
- break;
- case 0x3:
- props->active_mtu = props->max_mtu = IB_MTU_1024;
- break;
- case 0x4:
- props->active_mtu = props->max_mtu = IB_MTU_2048;
- break;
- case 0x5:
- props->active_mtu = props->max_mtu = IB_MTU_4096;
- break;
- default:
- ehca_err(&shca->ib_device, "Unknown MTU size: %x.",
- rblock->max_mtu);
- break;
- }
-
+ props->active_mtu = props->max_mtu = map_mtu(shca, rblock->max_mtu);
props->port_cap_flags = rblock->capability_mask;
props->gid_tbl_len = rblock->gid_tbl_len;
- props->max_msg_sz = rblock->max_msg_sz;
+ if (rblock->max_msg_sz)
+ props->max_msg_sz = rblock->max_msg_sz;
+ else
+ props->max_msg_sz = 0x1 << 31;
props->bad_pkey_cntr = rblock->bad_pkey_cntr;
props->qkey_viol_cntr = rblock->qkey_viol_cntr;
props->pkey_tbl_len = rblock->pkey_tbl_len;
@@ -186,6 +216,7 @@
props->sm_sl = rblock->sm_sl;
props->subnet_timeout = rblock->subnet_timeout;
props->init_type_reply = rblock->init_type_reply;
+ props->max_vl_num = map_number_of_vls(shca, rblock->vl_cap);
if (rblock->state && rblock->phys_width) {
props->phys_state = rblock->phys_pstate;
@@ -314,7 +345,7 @@
return ret;
}
-const u32 allowed_port_caps = (
+static const u32 allowed_port_caps = (
IB_PORT_SM | IB_PORT_LED_INFO_SUP | IB_PORT_CM_SUP |
IB_PORT_SNMP_TUNNEL_SUP | IB_PORT_DEVICE_MGMT_SUP |
IB_PORT_VENDOR_CLASS_SUP);
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index a86ebcc..65b3362 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -57,16 +57,17 @@
MODULE_DESCRIPTION("IBM eServer HCA InfiniBand Device Driver");
MODULE_VERSION(HCAD_VERSION);
-int ehca_open_aqp1 = 0;
+static int ehca_open_aqp1 = 0;
+static int ehca_hw_level = 0;
+static int ehca_poll_all_eqs = 1;
+static int ehca_mr_largepage = 1;
+
int ehca_debug_level = 0;
-int ehca_hw_level = 0;
int ehca_nr_ports = 2;
int ehca_use_hp_mr = 0;
int ehca_port_act_time = 30;
-int ehca_poll_all_eqs = 1;
int ehca_static_rate = -1;
int ehca_scaling_code = 0;
-int ehca_mr_largepage = 1;
int ehca_lock_hcalls = -1;
module_param_named(open_aqp1, ehca_open_aqp1, int, S_IRUGO);
@@ -396,7 +397,7 @@
return ret;
}
-int ehca_init_device(struct ehca_shca *shca)
+static int ehca_init_device(struct ehca_shca *shca)
{
int ret;
@@ -579,8 +580,8 @@
return 1;
}
-DRIVER_ATTR(debug_level, S_IRUSR | S_IWUSR,
- ehca_show_debug_level, ehca_store_debug_level);
+static DRIVER_ATTR(debug_level, S_IRUSR | S_IWUSR,
+ ehca_show_debug_level, ehca_store_debug_level);
static struct attribute *ehca_drv_attrs[] = {
&driver_attr_debug_level.attr,
@@ -941,7 +942,7 @@
spin_unlock(&shca_list_lock);
}
-int __init ehca_module_init(void)
+static int __init ehca_module_init(void)
{
int ret;
@@ -988,7 +989,7 @@
return ret;
};
-void __exit ehca_module_exit(void)
+static void __exit ehca_module_exit(void)
{
if (ehca_poll_all_eqs == 1)
del_timer_sync(&poll_eqs_timer);
diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.c b/drivers/infiniband/hw/ehca/ehca_mrmw.c
index e239bbf..f26997f 100644
--- a/drivers/infiniband/hw/ehca/ehca_mrmw.c
+++ b/drivers/infiniband/hw/ehca/ehca_mrmw.c
@@ -40,8 +40,6 @@
* POSSIBILITY OF SUCH DAMAGE.
*/
-#include <asm/current.h>
-
#include <rdma/ib_umem.h>
#include "ehca_iverbs.h"
@@ -419,7 +417,6 @@
struct ehca_shca *shca =
container_of(mr->device, struct ehca_shca, ib_device);
struct ehca_mr *e_mr = container_of(mr, struct ehca_mr, ib.ib_mr);
- struct ehca_pd *my_pd = container_of(mr->pd, struct ehca_pd, ib_pd);
u64 new_size;
u64 *new_start;
u32 new_acl;
@@ -429,15 +426,6 @@
u32 num_kpages = 0;
u32 num_hwpages = 0;
struct ehca_mr_pginfo pginfo;
- u32 cur_pid = current->tgid;
-
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- (my_pd->ownpid != cur_pid)) {
- ehca_err(mr->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- ret = -EINVAL;
- goto rereg_phys_mr_exit0;
- }
if (!(mr_rereg_mask & IB_MR_REREG_TRANS)) {
/* TODO not supported, because PHYP rereg hCall needs pages */
@@ -577,19 +565,9 @@
struct ehca_shca *shca =
container_of(mr->device, struct ehca_shca, ib_device);
struct ehca_mr *e_mr = container_of(mr, struct ehca_mr, ib.ib_mr);
- struct ehca_pd *my_pd = container_of(mr->pd, struct ehca_pd, ib_pd);
- u32 cur_pid = current->tgid;
unsigned long sl_flags;
struct ehca_mr_hipzout_parms hipzout;
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- (my_pd->ownpid != cur_pid)) {
- ehca_err(mr->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- ret = -EINVAL;
- goto query_mr_exit0;
- }
-
if ((e_mr->flags & EHCA_MR_FLAG_FMR)) {
ehca_err(mr->device, "not supported for FMR, mr=%p e_mr=%p "
"e_mr->flags=%x", mr, e_mr, e_mr->flags);
@@ -634,16 +612,6 @@
struct ehca_shca *shca =
container_of(mr->device, struct ehca_shca, ib_device);
struct ehca_mr *e_mr = container_of(mr, struct ehca_mr, ib.ib_mr);
- struct ehca_pd *my_pd = container_of(mr->pd, struct ehca_pd, ib_pd);
- u32 cur_pid = current->tgid;
-
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- (my_pd->ownpid != cur_pid)) {
- ehca_err(mr->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- ret = -EINVAL;
- goto dereg_mr_exit0;
- }
if ((e_mr->flags & EHCA_MR_FLAG_FMR)) {
ehca_err(mr->device, "not supported for FMR, mr=%p e_mr=%p "
@@ -1952,9 +1920,8 @@
return ret;
}
-int ehca_set_pagebuf_phys(struct ehca_mr_pginfo *pginfo,
- u32 number,
- u64 *kpage)
+static int ehca_set_pagebuf_phys(struct ehca_mr_pginfo *pginfo,
+ u32 number, u64 *kpage)
{
int ret = 0;
struct ib_phys_buf *pbuf;
@@ -2012,9 +1979,8 @@
return ret;
}
-int ehca_set_pagebuf_fmr(struct ehca_mr_pginfo *pginfo,
- u32 number,
- u64 *kpage)
+static int ehca_set_pagebuf_fmr(struct ehca_mr_pginfo *pginfo,
+ u32 number, u64 *kpage)
{
int ret = 0;
u64 *fmrlist;
diff --git a/drivers/infiniband/hw/ehca/ehca_pd.c b/drivers/infiniband/hw/ehca/ehca_pd.c
index 43bcf08..2fe5548 100644
--- a/drivers/infiniband/hw/ehca/ehca_pd.c
+++ b/drivers/infiniband/hw/ehca/ehca_pd.c
@@ -38,8 +38,6 @@
* POSSIBILITY OF SUCH DAMAGE.
*/
-#include <asm/current.h>
-
#include "ehca_tools.h"
#include "ehca_iverbs.h"
@@ -58,7 +56,6 @@
return ERR_PTR(-ENOMEM);
}
- pd->ownpid = current->tgid;
for (i = 0; i < 2; i++) {
INIT_LIST_HEAD(&pd->free[i]);
INIT_LIST_HEAD(&pd->full[i]);
@@ -85,18 +82,10 @@
int ehca_dealloc_pd(struct ib_pd *pd)
{
- u32 cur_pid = current->tgid;
struct ehca_pd *my_pd = container_of(pd, struct ehca_pd, ib_pd);
int i, leftovers = 0;
struct ipz_small_queue_page *page, *tmp;
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- my_pd->ownpid != cur_pid) {
- ehca_err(pd->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- return -EINVAL;
- }
-
for (i = 0; i < 2; i++) {
list_splice(&my_pd->full[i], &my_pd->free[i]);
list_for_each_entry_safe(page, tmp, &my_pd->free[i], list) {
diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c
index 1012f15..3eb14a5 100644
--- a/drivers/infiniband/hw/ehca/ehca_qp.c
+++ b/drivers/infiniband/hw/ehca/ehca_qp.c
@@ -43,9 +43,6 @@
* POSSIBILITY OF SUCH DAMAGE.
*/
-
-#include <asm/current.h>
-
#include "ehca_classes.h"
#include "ehca_tools.h"
#include "ehca_qes.h"
@@ -424,6 +421,9 @@
u32 swqe_size = 0, rwqe_size = 0, ib_qp_num;
unsigned long flags;
+ if (init_attr->create_flags)
+ return ERR_PTR(-EINVAL);
+
memset(&parms, 0, sizeof(parms));
qp_type = init_attr->qp_type;
@@ -1526,16 +1526,6 @@
struct ehca_shca *shca = container_of(ibqp->device, struct ehca_shca,
ib_device);
struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp);
- struct ehca_pd *my_pd = container_of(my_qp->ib_qp.pd, struct ehca_pd,
- ib_pd);
- u32 cur_pid = current->tgid;
-
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- my_pd->ownpid != cur_pid) {
- ehca_err(ibqp->pd->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- return -EINVAL;
- }
/* The if-block below caches qp_attr to be modified for GSI and SMI
* qps during the initialization by ib_mad. When the respective port
@@ -1636,23 +1626,13 @@
int qp_attr_mask, struct ib_qp_init_attr *qp_init_attr)
{
struct ehca_qp *my_qp = container_of(qp, struct ehca_qp, ib_qp);
- struct ehca_pd *my_pd = container_of(my_qp->ib_qp.pd, struct ehca_pd,
- ib_pd);
struct ehca_shca *shca = container_of(qp->device, struct ehca_shca,
ib_device);
struct ipz_adapter_handle adapter_handle = shca->ipz_hca_handle;
struct hcp_modify_qp_control_block *qpcb;
- u32 cur_pid = current->tgid;
int cnt, ret = 0;
u64 h_ret;
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- my_pd->ownpid != cur_pid) {
- ehca_err(qp->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- return -EINVAL;
- }
-
if (qp_attr_mask & QP_ATTR_QUERY_NOT_SUPPORTED) {
ehca_err(qp->device, "Invalid attribute mask "
"ehca_qp=%p qp_num=%x qp_attr_mask=%x ",
@@ -1797,8 +1777,6 @@
{
struct ehca_qp *my_qp =
container_of(ibsrq, struct ehca_qp, ib_srq);
- struct ehca_pd *my_pd =
- container_of(ibsrq->pd, struct ehca_pd, ib_pd);
struct ehca_shca *shca =
container_of(ibsrq->pd->device, struct ehca_shca, ib_device);
struct hcp_modify_qp_control_block *mqpcb;
@@ -1806,14 +1784,6 @@
u64 h_ret;
int ret = 0;
- u32 cur_pid = current->tgid;
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- my_pd->ownpid != cur_pid) {
- ehca_err(ibsrq->pd->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- return -EINVAL;
- }
-
mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!mqpcb) {
ehca_err(ibsrq->device, "Could not get zeroed page for mqpcb "
@@ -1864,22 +1834,13 @@
int ehca_query_srq(struct ib_srq *srq, struct ib_srq_attr *srq_attr)
{
struct ehca_qp *my_qp = container_of(srq, struct ehca_qp, ib_srq);
- struct ehca_pd *my_pd = container_of(srq->pd, struct ehca_pd, ib_pd);
struct ehca_shca *shca = container_of(srq->device, struct ehca_shca,
ib_device);
struct ipz_adapter_handle adapter_handle = shca->ipz_hca_handle;
struct hcp_modify_qp_control_block *qpcb;
- u32 cur_pid = current->tgid;
int ret = 0;
u64 h_ret;
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- my_pd->ownpid != cur_pid) {
- ehca_err(srq->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- return -EINVAL;
- }
-
qpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
if (!qpcb) {
ehca_err(srq->device, "Out of memory for qpcb "
@@ -1919,7 +1880,6 @@
struct ehca_pd *my_pd = container_of(my_qp->ib_qp.pd, struct ehca_pd,
ib_pd);
struct ehca_sport *sport = &shca->sport[my_qp->init_attr.port_num - 1];
- u32 cur_pid = current->tgid;
u32 qp_num = my_qp->real_qp_num;
int ret;
u64 h_ret;
@@ -1934,11 +1894,6 @@
"user space qp_num=%x", qp_num);
return -EINVAL;
}
- if (my_pd->ownpid != cur_pid) {
- ehca_err(dev, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- return -EINVAL;
- }
}
if (my_qp->send_cq) {
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index 2ce8cff..a20bbf4 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -188,7 +188,7 @@
if (send_wr->opcode == IB_WR_SEND_WITH_IMM ||
send_wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) {
/* this might not work as long as HW does not support it */
- wqe_p->immediate_data = be32_to_cpu(send_wr->imm_data);
+ wqe_p->immediate_data = be32_to_cpu(send_wr->ex.imm_data);
wqe_p->wr_flag |= WQE_WRFLAG_IMM_DATA_PRESENT;
}
diff --git a/drivers/infiniband/hw/ehca/ehca_tools.h b/drivers/infiniband/hw/ehca/ehca_tools.h
index 4a8346a..ec950bf 100644
--- a/drivers/infiniband/hw/ehca/ehca_tools.h
+++ b/drivers/infiniband/hw/ehca/ehca_tools.h
@@ -73,37 +73,37 @@
if (unlikely(ehca_debug_level)) \
dev_printk(KERN_DEBUG, (ib_dev)->dma_device, \
"PU%04x EHCA_DBG:%s " format "\n", \
- raw_smp_processor_id(), __FUNCTION__, \
+ raw_smp_processor_id(), __func__, \
## arg); \
} while (0)
#define ehca_info(ib_dev, format, arg...) \
dev_info((ib_dev)->dma_device, "PU%04x EHCA_INFO:%s " format "\n", \
- raw_smp_processor_id(), __FUNCTION__, ## arg)
+ raw_smp_processor_id(), __func__, ## arg)
#define ehca_warn(ib_dev, format, arg...) \
dev_warn((ib_dev)->dma_device, "PU%04x EHCA_WARN:%s " format "\n", \
- raw_smp_processor_id(), __FUNCTION__, ## arg)
+ raw_smp_processor_id(), __func__, ## arg)
#define ehca_err(ib_dev, format, arg...) \
dev_err((ib_dev)->dma_device, "PU%04x EHCA_ERR:%s " format "\n", \
- raw_smp_processor_id(), __FUNCTION__, ## arg)
+ raw_smp_processor_id(), __func__, ## arg)
/* use this one only if no ib_dev available */
#define ehca_gen_dbg(format, arg...) \
do { \
if (unlikely(ehca_debug_level)) \
printk(KERN_DEBUG "PU%04x EHCA_DBG:%s " format "\n", \
- raw_smp_processor_id(), __FUNCTION__, ## arg); \
+ raw_smp_processor_id(), __func__, ## arg); \
} while (0)
#define ehca_gen_warn(format, arg...) \
printk(KERN_INFO "PU%04x EHCA_WARN:%s " format "\n", \
- raw_smp_processor_id(), __FUNCTION__, ## arg)
+ raw_smp_processor_id(), __func__, ## arg)
#define ehca_gen_err(format, arg...) \
printk(KERN_ERR "PU%04x EHCA_ERR:%s " format "\n", \
- raw_smp_processor_id(), __FUNCTION__, ## arg)
+ raw_smp_processor_id(), __func__, ## arg)
/**
* ehca_dmp - printk a memory block, whose length is n*8 bytes.
@@ -118,7 +118,7 @@
for (x = 0; x < l; x += 16) { \
printk(KERN_INFO "EHCA_DMP:%s " format \
" adr=%p ofs=%04x %016lx %016lx\n", \
- __FUNCTION__, ##args, deb, x, \
+ __func__, ##args, deb, x, \
*((u64 *)&deb[0]), *((u64 *)&deb[8])); \
deb += 16; \
} \
diff --git a/drivers/infiniband/hw/ehca/ehca_uverbs.c b/drivers/infiniband/hw/ehca/ehca_uverbs.c
index 5234d6c..1b07f2b 100644
--- a/drivers/infiniband/hw/ehca/ehca_uverbs.c
+++ b/drivers/infiniband/hw/ehca/ehca_uverbs.c
@@ -40,8 +40,6 @@
* POSSIBILITY OF SUCH DAMAGE.
*/
-#include <asm/current.h>
-
#include "ehca_classes.h"
#include "ehca_iverbs.h"
#include "ehca_mrmw.h"
@@ -253,11 +251,9 @@
u32 idr_handle = fileoffset & 0x1FFFFFF;
u32 q_type = (fileoffset >> 27) & 0x1; /* CQ, QP,... */
u32 rsrc_type = (fileoffset >> 25) & 0x3; /* sq,rq,cmnd_window */
- u32 cur_pid = current->tgid;
u32 ret;
struct ehca_cq *cq;
struct ehca_qp *qp;
- struct ehca_pd *pd;
struct ib_uobject *uobject;
switch (q_type) {
@@ -270,13 +266,6 @@
if (!cq)
return -EINVAL;
- if (cq->ownpid != cur_pid) {
- ehca_err(cq->ib_cq.device,
- "Invalid caller pid=%x ownpid=%x",
- cur_pid, cq->ownpid);
- return -ENOMEM;
- }
-
if (!cq->ib_cq.uobject || cq->ib_cq.uobject->context != context)
return -EINVAL;
@@ -298,14 +287,6 @@
if (!qp)
return -EINVAL;
- pd = container_of(qp->ib_qp.pd, struct ehca_pd, ib_pd);
- if (pd->ownpid != cur_pid) {
- ehca_err(qp->ib_qp.device,
- "Invalid caller pid=%x ownpid=%x",
- cur_pid, pd->ownpid);
- return -ENOMEM;
- }
-
uobject = IS_SRQ(qp) ? qp->ib_srq.uobject : qp->ib_qp.uobject;
if (!uobject || uobject->context != context)
return -EINVAL;
diff --git a/drivers/infiniband/hw/ipath/Makefile b/drivers/infiniband/hw/ipath/Makefile
index fe67388..75a6c91 100644
--- a/drivers/infiniband/hw/ipath/Makefile
+++ b/drivers/infiniband/hw/ipath/Makefile
@@ -20,17 +20,20 @@
ipath_qp.o \
ipath_rc.o \
ipath_ruc.o \
+ ipath_sdma.o \
ipath_srq.o \
ipath_stats.o \
ipath_sysfs.o \
ipath_uc.o \
ipath_ud.o \
ipath_user_pages.o \
+ ipath_user_sdma.o \
ipath_verbs_mcast.o \
ipath_verbs.o
ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o
ib_ipath-$(CONFIG_PCI_MSI) += ipath_iba6120.o
+ib_ipath-$(CONFIG_PCI_MSI) += ipath_iba7220.o ipath_sd7220.o ipath_sd7220_img.o
ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o
ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o
diff --git a/drivers/infiniband/hw/ipath/ipath_7220.h b/drivers/infiniband/hw/ipath/ipath_7220.h
new file mode 100644
index 0000000..74fa5cc
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_7220.h
@@ -0,0 +1,57 @@
+#ifndef _IPATH_7220_H
+#define _IPATH_7220_H
+/*
+ * Copyright (c) 2007 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This header file provides the declarations and common definitions
+ * for (mostly) manipulation of the SerDes blocks within the IBA7220.
+ * the functions declared should only be called from within other
+ * 7220-related files such as ipath_iba7220.c or ipath_sd7220.c.
+ */
+int ipath_sd7220_presets(struct ipath_devdata *dd);
+int ipath_sd7220_init(struct ipath_devdata *dd, int was_reset);
+int ipath_sd7220_prog_ld(struct ipath_devdata *dd, int sdnum, u8 *img,
+ int len, int offset);
+int ipath_sd7220_prog_vfy(struct ipath_devdata *dd, int sdnum, const u8 *img,
+ int len, int offset);
+/*
+ * Below used for sdnum parameter, selecting one of the two sections
+ * used for PCIe, or the single SerDes used for IB, which is the
+ * only one currently used
+ */
+#define IB_7220_SERDES 2
+
+int ipath_sd7220_ib_load(struct ipath_devdata *dd);
+int ipath_sd7220_ib_vfy(struct ipath_devdata *dd);
+
+#endif /* _IPATH_7220_H */
diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 591901a..28cfe97 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -80,6 +80,8 @@
#define IPATH_IB_LINKDOWN_DISABLE 5
#define IPATH_IB_LINK_LOOPBACK 6 /* enable local loopback */
#define IPATH_IB_LINK_EXTERNAL 7 /* normal, disable local loopback */
+#define IPATH_IB_LINK_NO_HRTBT 8 /* disable Heartbeat, e.g. for loopback */
+#define IPATH_IB_LINK_HRTBT 9 /* enable heartbeat, normal, non-loopback */
/*
* These 3 values (SDR and DDR may be ORed for auto-speed
@@ -198,7 +200,8 @@
#define IPATH_RUNTIME_FORCE_WC_ORDER 0x4
#define IPATH_RUNTIME_RCVHDR_COPY 0x8
#define IPATH_RUNTIME_MASTER 0x10
-/* 0x20 and 0x40 are no longer used, but are reserved for ABI compatibility */
+#define IPATH_RUNTIME_NODMA_RTAIL 0x80
+#define IPATH_RUNTIME_SDMA 0x200
#define IPATH_RUNTIME_FORCE_PIOAVAIL 0x400
#define IPATH_RUNTIME_PIO_REGSWAPPED 0x800
@@ -444,8 +447,9 @@
#define IPATH_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */
#define IPATH_CMD_POLL_TYPE 28 /* set the kind of polling we want */
#define IPATH_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */
-
-#define IPATH_CMD_MAX 29
+/* 30 is unused */
+#define IPATH_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */
+#define IPATH_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */
/*
* Poll types
@@ -483,6 +487,17 @@
union {
struct ipath_tid_info tid_info;
struct ipath_user_info user_info;
+
+ /*
+ * address in userspace where we should put the sdma
+ * inflight counter
+ */
+ __u64 sdma_inflight;
+ /*
+ * address in userspace where we should put the sdma
+ * completion counter
+ */
+ __u64 sdma_complete;
/* address in userspace of struct ipath_port_info to
write result to */
__u64 port_info;
@@ -537,7 +552,7 @@
/* The second diag_pkt struct is the expanded version that allows
* more control over the packet, specifically, by allowing a custom
- * pbc (+ extra) qword, so that special modes and deliberate
+ * pbc (+ static rate) qword, so that special modes and deliberate
* changes to CRCs can be used. The elements were also re-ordered
* for better alignment and to avoid padding issues.
*/
@@ -662,8 +677,12 @@
#define INFINIPATH_RHF_LENGTH_SHIFT 0
#define INFINIPATH_RHF_RCVTYPE_MASK 0x7
#define INFINIPATH_RHF_RCVTYPE_SHIFT 11
-#define INFINIPATH_RHF_EGRINDEX_MASK 0x7FF
+#define INFINIPATH_RHF_EGRINDEX_MASK 0xFFF
#define INFINIPATH_RHF_EGRINDEX_SHIFT 16
+#define INFINIPATH_RHF_SEQ_MASK 0xF
+#define INFINIPATH_RHF_SEQ_SHIFT 0
+#define INFINIPATH_RHF_HDRQ_OFFSET_MASK 0x7FF
+#define INFINIPATH_RHF_HDRQ_OFFSET_SHIFT 4
#define INFINIPATH_RHF_H_ICRCERR 0x80000000
#define INFINIPATH_RHF_H_VCRCERR 0x40000000
#define INFINIPATH_RHF_H_PARITYERR 0x20000000
@@ -673,6 +692,8 @@
#define INFINIPATH_RHF_H_TIDERR 0x02000000
#define INFINIPATH_RHF_H_MKERR 0x01000000
#define INFINIPATH_RHF_H_IBERR 0x00800000
+#define INFINIPATH_RHF_H_ERR_MASK 0xFF800000
+#define INFINIPATH_RHF_L_USE_EGR 0x80000000
#define INFINIPATH_RHF_L_SWA 0x00008000
#define INFINIPATH_RHF_L_SWB 0x00004000
@@ -696,6 +717,7 @@
/* SendPIO per-buffer control */
#define INFINIPATH_SP_TEST 0x40
#define INFINIPATH_SP_TESTEBP 0x20
+#define INFINIPATH_SP_TRIGGER_SHIFT 15
/* SendPIOAvail bits */
#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
@@ -762,6 +784,7 @@
#define IPATH_MSN_MASK 0xFFFFFF
#define IPATH_QPN_MASK 0xFFFFFF
#define IPATH_MULTICAST_LID_BASE 0xC000
+#define IPATH_EAGER_TID_ID INFINIPATH_I_TID_MASK
#define IPATH_MULTICAST_QPN 0xFFFFFF
/* Receive Header Queue: receive type (from infinipath) */
@@ -781,7 +804,7 @@
*/
static inline __u32 ipath_hdrget_err_flags(const __le32 * rbuf)
{
- return __le32_to_cpu(rbuf[1]);
+ return __le32_to_cpu(rbuf[1]) & INFINIPATH_RHF_H_ERR_MASK;
}
static inline __u32 ipath_hdrget_rcv_type(const __le32 * rbuf)
@@ -802,6 +825,23 @@
& INFINIPATH_RHF_EGRINDEX_MASK;
}
+static inline __u32 ipath_hdrget_seq(const __le32 *rbuf)
+{
+ return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_SEQ_SHIFT)
+ & INFINIPATH_RHF_SEQ_MASK;
+}
+
+static inline __u32 ipath_hdrget_offset(const __le32 *rbuf)
+{
+ return (__le32_to_cpu(rbuf[1]) >> INFINIPATH_RHF_HDRQ_OFFSET_SHIFT)
+ & INFINIPATH_RHF_HDRQ_OFFSET_MASK;
+}
+
+static inline __u32 ipath_hdrget_use_egr_buf(const __le32 *rbuf)
+{
+ return __le32_to_cpu(rbuf[0]) & INFINIPATH_RHF_L_USE_EGR;
+}
+
static inline __u32 ipath_hdrget_ipath_ver(__le32 hdrword)
{
return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
diff --git a/drivers/infiniband/hw/ipath/ipath_debug.h b/drivers/infiniband/hw/ipath/ipath_debug.h
index d6f6953..65926cd 100644
--- a/drivers/infiniband/hw/ipath/ipath_debug.h
+++ b/drivers/infiniband/hw/ipath/ipath_debug.h
@@ -66,6 +66,7 @@
#define __IPATH_IPATHERR 0x40000 /* Ethernet (IPATH) errors */
#define __IPATH_IPATHPD 0x80000 /* Ethernet (IPATH) packet dump */
#define __IPATH_IPATHTABLE 0x100000 /* Ethernet (IPATH) table dump */
+#define __IPATH_LINKVERBDBG 0x200000 /* very verbose linkchange debug */
#else /* _IPATH_DEBUGGING */
@@ -89,6 +90,7 @@
#define __IPATH_IPATHERR 0x0 /* Ethernet (IPATH) errors on */
#define __IPATH_IPATHPD 0x0 /* Ethernet (IPATH) packet dump on */
#define __IPATH_IPATHTABLE 0x0 /* Ethernet (IPATH) packet dump on */
+#define __IPATH_LINKVERBDBG 0x0 /* very verbose linkchange debug */
#endif /* _IPATH_DEBUGGING */
diff --git a/drivers/infiniband/hw/ipath/ipath_diag.c b/drivers/infiniband/hw/ipath/ipath_diag.c
index 4137c77..6d49d2f 100644
--- a/drivers/infiniband/hw/ipath/ipath_diag.c
+++ b/drivers/infiniband/hw/ipath/ipath_diag.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -330,13 +330,19 @@
struct ipath_devdata *dd;
ssize_t ret = 0;
u64 val;
+ u32 l_state, lt_state; /* LinkState, LinkTrainingState */
- if (count != sizeof(dp)) {
+ if (count < sizeof(odp)) {
ret = -EINVAL;
goto bail;
}
- if (copy_from_user(&dp, data, sizeof(dp))) {
+ if (count == sizeof(dp)) {
+ if (copy_from_user(&dp, data, sizeof(dp))) {
+ ret = -EFAULT;
+ goto bail;
+ }
+ } else if (copy_from_user(&odp, data, sizeof(odp))) {
ret = -EFAULT;
goto bail;
}
@@ -396,10 +402,17 @@
ret = -ENODEV;
goto bail;
}
- /* Check link state, but not if we have custom PBC */
- val = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
- if (!dp.pbc_wd && val != IPATH_IBSTATE_INIT &&
- val != IPATH_IBSTATE_ARM && val != IPATH_IBSTATE_ACTIVE) {
+ /*
+ * Want to skip check for l_state if using custom PBC,
+ * because we might be trying to force an SM packet out.
+ * first-cut, skip _all_ state checking in that case.
+ */
+ val = ipath_ib_state(dd, dd->ipath_lastibcstat);
+ lt_state = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
+ l_state = ipath_ib_linkstate(dd, dd->ipath_lastibcstat);
+ if (!dp.pbc_wd && (lt_state != INFINIPATH_IBCS_LT_STATE_LINKUP ||
+ (val != dd->ib_init && val != dd->ib_arm &&
+ val != dd->ib_active))) {
ipath_cdbg(VERBOSE, "unit %u not ready (state %llx)\n",
dd->ipath_unit, (unsigned long long) val);
ret = -EINVAL;
@@ -431,15 +444,17 @@
goto bail;
}
- piobuf = ipath_getpiobuf(dd, &pbufn);
+ plen >>= 2; /* in dwords */
+
+ piobuf = ipath_getpiobuf(dd, plen, &pbufn);
if (!piobuf) {
ipath_cdbg(VERBOSE, "No PIO buffers avail unit for %u\n",
dd->ipath_unit);
ret = -EBUSY;
goto bail;
}
-
- plen >>= 2; /* in dwords */
+ /* disarm it just to be extra sure */
+ ipath_disarm_piobufs(dd, pbufn, 1);
if (ipath_debug & __IPATH_PKTDBG)
ipath_cdbg(VERBOSE, "unit %u 0x%x+1w pio%d\n",
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index ca4d0ac..e0a64f0 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -41,7 +41,6 @@
#include "ipath_kernel.h"
#include "ipath_verbs.h"
-#include "ipath_common.h"
static void ipath_update_pio_bufs(struct ipath_devdata *);
@@ -73,10 +72,27 @@
MODULE_PARM_DESC(debug, "mask for debug prints");
EXPORT_SYMBOL_GPL(ipath_debug);
+unsigned ipath_mtu4096 = 1; /* max 4KB IB mtu by default, if supported */
+module_param_named(mtu4096, ipath_mtu4096, uint, S_IRUGO);
+MODULE_PARM_DESC(mtu4096, "enable MTU of 4096 bytes, if supported");
+
+static unsigned ipath_hol_timeout_ms = 13000;
+module_param_named(hol_timeout_ms, ipath_hol_timeout_ms, uint, S_IRUGO);
+MODULE_PARM_DESC(hol_timeout_ms,
+ "duration of user app suspension after link failure");
+
+unsigned ipath_linkrecovery = 1;
+module_param_named(linkrecovery, ipath_linkrecovery, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(linkrecovery, "enable workaround for link recovery issue");
+
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("QLogic <support@pathscale.com>");
+MODULE_AUTHOR("QLogic <support@qlogic.com>");
MODULE_DESCRIPTION("QLogic InfiniPath driver");
+/*
+ * Table to translate the LINKTRAININGSTATE portion of
+ * IBCStatus to a human-readable form.
+ */
const char *ipath_ibcstatus_str[] = {
"Disabled",
"LinkUp",
@@ -91,9 +107,20 @@
"CfgWaitRmt",
"CfgIdle",
"RecovRetrain",
- "LState0xD", /* unused */
+ "CfgTxRevLane", /* unused before IBA7220 */
"RecovWaitRmt",
"RecovIdle",
+ /* below were added for IBA7220 */
+ "CfgEnhanced",
+ "CfgTest",
+ "CfgWaitRmtTest",
+ "CfgWaitCfgEnhanced",
+ "SendTS_T",
+ "SendTstIdles",
+ "RcvTS_T",
+ "SendTst_TS1s",
+ "LTState18", "LTState19", "LTState1A", "LTState1B",
+ "LTState1C", "LTState1D", "LTState1E", "LTState1F"
};
static void __devexit ipath_remove_one(struct pci_dev *);
@@ -102,8 +129,10 @@
/* Only needed for registration, nothing else needs this info */
#define PCI_VENDOR_ID_PATHSCALE 0x1fc1
+#define PCI_VENDOR_ID_QLOGIC 0x1077
#define PCI_DEVICE_ID_INFINIPATH_HT 0xd
#define PCI_DEVICE_ID_INFINIPATH_PE800 0x10
+#define PCI_DEVICE_ID_INFINIPATH_7220 0x7220
/* Number of seconds before our card status check... */
#define STATUS_TIMEOUT 60
@@ -111,6 +140,7 @@
static const struct pci_device_id ipath_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_INFINIPATH_7220) },
{ 0, }
};
@@ -126,19 +156,6 @@
},
};
-static void ipath_check_status(struct work_struct *work)
-{
- struct ipath_devdata *dd = container_of(work, struct ipath_devdata,
- status_work.work);
-
- /*
- * If we don't have any interrupts, let the user know and
- * don't bother checking again.
- */
- if (dd->ipath_int_counter == 0)
- dev_err(&dd->pcidev->dev, "No interrupts detected.\n");
-}
-
static inline void read_bars(struct ipath_devdata *dd, struct pci_dev *dev,
u32 *bar0, u32 *bar1)
{
@@ -206,8 +223,6 @@
dd->pcidev = pdev;
pci_set_drvdata(pdev, dd);
- INIT_DELAYED_WORK(&dd->status_work, ipath_check_status);
-
list_add(&dd->ipath_list, &ipath_dev_list);
bail_unlock:
@@ -234,12 +249,12 @@
return dd;
}
-int ipath_count_units(int *npresentp, int *nupp, u32 *maxportsp)
+int ipath_count_units(int *npresentp, int *nupp, int *maxportsp)
{
int nunits, npresent, nup;
struct ipath_devdata *dd;
unsigned long flags;
- u32 maxports;
+ int maxports;
nunits = npresent = nup = maxports = 0;
@@ -304,7 +319,7 @@
u32 *addr;
u64 msecs, emsecs;
- piobuf = ipath_getpiobuf(dd, &pbnum);
+ piobuf = ipath_getpiobuf(dd, 0, &pbnum);
if (!piobuf) {
dev_info(&dd->pcidev->dev,
"No PIObufs for checking perf, skipping\n");
@@ -336,7 +351,14 @@
ipath_disable_armlaunch(dd);
- writeq(0, piobuf); /* length 0, no dwords actually sent */
+ /*
+ * length 0, no dwords actually sent, and mark as VL15
+ * on chips where that may matter (due to IB flowcontrol)
+ */
+ if ((dd->ipath_flags & IPATH_HAS_PBC_CNT))
+ writeq(1UL << 63, piobuf);
+ else
+ writeq(0, piobuf);
ipath_flush_wc();
/*
@@ -377,6 +399,7 @@
struct ipath_devdata *dd;
unsigned long long addr;
u32 bar0 = 0, bar1 = 0;
+ u8 rev;
dd = ipath_alloc_devdata(pdev);
if (IS_ERR(dd)) {
@@ -408,7 +431,7 @@
}
addr = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
- ipath_cdbg(VERBOSE, "regbase (0) %llx len %d pdev->irq %d, vend %x/%x "
+ ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %d, vend %x/%x "
"driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
ent->device, ent->driver_data);
@@ -512,6 +535,13 @@
"CONFIG_PCI_MSI is not enabled\n", ent->device);
return -ENODEV;
#endif
+ case PCI_DEVICE_ID_INFINIPATH_7220:
+#ifndef CONFIG_PCI_MSI
+ ipath_dbg("CONFIG_PCI_MSI is not enabled, "
+ "using IntX for unit %u\n", dd->ipath_unit);
+#endif
+ ipath_init_iba7220_funcs(dd);
+ break;
default:
ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
"failing\n", ent->device);
@@ -533,7 +563,13 @@
goto bail_regions;
}
- dd->ipath_pcirev = pdev->revision;
+ ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+ if (ret) {
+ ipath_dev_err(dd, "Failed to read PCI revision ID unit "
+ "%u: err %d\n", dd->ipath_unit, -ret);
+ goto bail_regions; /* shouldn't ever happen */
+ }
+ dd->ipath_pcirev = rev;
#if defined(__powerpc__)
/* There isn't a generic way to specify writethrough mappings */
@@ -556,14 +592,6 @@
ipath_cdbg(VERBOSE, "mapped io addr %llx to kregbase %p\n",
addr, dd->ipath_kregbase);
- /*
- * clear ipath_flags here instead of in ipath_init_chip as it is set
- * by ipath_setup_htconfig.
- */
- dd->ipath_flags = 0;
- dd->ipath_lli_counter = 0;
- dd->ipath_lli_errors = 0;
-
if (dd->ipath_f_bus(dd, pdev))
ipath_dev_err(dd, "Failed to setup config space; "
"continuing anyway\n");
@@ -608,13 +636,11 @@
ipath_diag_add(dd);
ipath_register_ib_device(dd);
- /* Check that card status in STATUS_TIMEOUT seconds. */
- schedule_delayed_work(&dd->status_work, HZ * STATUS_TIMEOUT);
-
goto bail;
bail_irqsetup:
- if (pdev->irq) free_irq(pdev->irq, dd);
+ if (pdev->irq)
+ free_irq(pdev->irq, dd);
bail_iounmap:
iounmap((volatile void __iomem *) dd->ipath_kregbase);
@@ -654,6 +680,10 @@
ipath_disable_wc(dd);
}
+ if (dd->ipath_spectriggerhit)
+ dev_info(&dd->pcidev->dev, "%lu special trigger hits\n",
+ dd->ipath_spectriggerhit);
+
if (dd->ipath_pioavailregs_dma) {
dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
(void *) dd->ipath_pioavailregs_dma,
@@ -706,6 +736,8 @@
tmpp = dd->ipath_pageshadow;
dd->ipath_pageshadow = NULL;
vfree(tmpp);
+
+ dd->ipath_egrtidbase = NULL;
}
/*
@@ -738,7 +770,6 @@
*/
ipath_shutdown_device(dd);
- cancel_delayed_work(&dd->status_work);
flush_scheduled_work();
if (dd->verbs_dev)
@@ -823,20 +854,8 @@
ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
}
-
- /*
- * Disable PIOAVAILUPD, then re-enable, reading scratch in
- * between. This seems to avoid a chip timing race that causes
- * pioavail updates to memory to stop. We xor as we don't
- * know the state of the bit when we're called.
- */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl ^ INFINIPATH_S_PIOBUFAVAILUPD);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ /* on some older chips, update may not happen after cancel */
+ ipath_force_pio_avail_update(dd);
}
/**
@@ -873,18 +892,52 @@
(unsigned long long) ipath_read_kreg64(
dd, dd->ipath_kregs->kr_ibcctrl),
(unsigned long long) val,
- ipath_ibcstatus_str[val & 0xf]);
+ ipath_ibcstatus_str[val & dd->ibcs_lts_mask]);
}
return (dd->ipath_flags & state) ? 0 : -ETIMEDOUT;
}
+static void decode_sdma_errs(struct ipath_devdata *dd, ipath_err_t err,
+ char *buf, size_t blen)
+{
+ static const struct {
+ ipath_err_t err;
+ const char *msg;
+ } errs[] = {
+ { INFINIPATH_E_SDMAGENMISMATCH, "SDmaGenMismatch" },
+ { INFINIPATH_E_SDMAOUTOFBOUND, "SDmaOutOfBound" },
+ { INFINIPATH_E_SDMATAILOUTOFBOUND, "SDmaTailOutOfBound" },
+ { INFINIPATH_E_SDMABASE, "SDmaBase" },
+ { INFINIPATH_E_SDMA1STDESC, "SDma1stDesc" },
+ { INFINIPATH_E_SDMARPYTAG, "SDmaRpyTag" },
+ { INFINIPATH_E_SDMADWEN, "SDmaDwEn" },
+ { INFINIPATH_E_SDMAMISSINGDW, "SDmaMissingDw" },
+ { INFINIPATH_E_SDMAUNEXPDATA, "SDmaUnexpData" },
+ { INFINIPATH_E_SDMADESCADDRMISALIGN, "SDmaDescAddrMisalign" },
+ { INFINIPATH_E_SENDBUFMISUSE, "SendBufMisuse" },
+ { INFINIPATH_E_SDMADISABLED, "SDmaDisabled" },
+ };
+ int i;
+ int expected;
+ size_t bidx = 0;
+
+ for (i = 0; i < ARRAY_SIZE(errs); i++) {
+ expected = (errs[i].err != INFINIPATH_E_SDMADISABLED) ? 0 :
+ test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
+ if ((err & errs[i].err) && !expected)
+ bidx += snprintf(buf + bidx, blen - bidx,
+ "%s ", errs[i].msg);
+ }
+}
+
/*
* Decode the error status into strings, deciding whether to always
* print * it or not depending on "normal packet errors" vs everything
* else. Return 1 if "real" errors, otherwise 0 if only packet
* errors, so caller can decide what to print with the string.
*/
-int ipath_decode_err(char *buf, size_t blen, ipath_err_t err)
+int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
+ ipath_err_t err)
{
int iserr = 1;
*buf = '\0';
@@ -922,6 +975,8 @@
strlcat(buf, "rbadversion ", blen);
if (err & INFINIPATH_E_RHDR)
strlcat(buf, "rhdr ", blen);
+ if (err & INFINIPATH_E_SENDSPECIALTRIGGER)
+ strlcat(buf, "sendspecialtrigger ", blen);
if (err & INFINIPATH_E_RLONGPKTLEN)
strlcat(buf, "rlongpktlen ", blen);
if (err & INFINIPATH_E_RMAXPKTLEN)
@@ -964,6 +1019,10 @@
strlcat(buf, "hardware ", blen);
if (err & INFINIPATH_E_RESET)
strlcat(buf, "reset ", blen);
+ if (err & INFINIPATH_E_SDMAERRS)
+ decode_sdma_errs(dd, err, buf, blen);
+ if (err & INFINIPATH_E_INVALIDEEPCMD)
+ strlcat(buf, "invalideepromcmd ", blen);
done:
return iserr;
}
@@ -1076,18 +1135,17 @@
u32 eflags,
u32 l,
u32 etail,
- u64 *rc)
+ __le32 *rhf_addr,
+ struct ipath_message_header *hdr)
{
char emsg[128];
- struct ipath_message_header *hdr;
get_rhf_errstring(eflags, emsg, sizeof emsg);
- hdr = (struct ipath_message_header *)&rc[1];
ipath_cdbg(PKT, "RHFerrs %x hdrqtail=%x typ=%u "
"tlen=%x opcode=%x egridx=%x: %s\n",
eflags, l,
- ipath_hdrget_rcv_type((__le32 *) rc),
- ipath_hdrget_length_in_bytes((__le32 *) rc),
+ ipath_hdrget_rcv_type(rhf_addr),
+ ipath_hdrget_length_in_bytes(rhf_addr),
be32_to_cpu(hdr->bth[0]) >> 24,
etail, emsg);
@@ -1112,55 +1170,52 @@
*/
void ipath_kreceive(struct ipath_portdata *pd)
{
- u64 *rc;
struct ipath_devdata *dd = pd->port_dd;
+ __le32 *rhf_addr;
void *ebuf;
const u32 rsize = dd->ipath_rcvhdrentsize; /* words */
const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */
u32 etail = -1, l, hdrqtail;
struct ipath_message_header *hdr;
- u32 eflags, i, etype, tlen, pkttot = 0, updegr=0, reloop=0;
+ u32 eflags, i, etype, tlen, pkttot = 0, updegr = 0, reloop = 0;
static u64 totcalls; /* stats, may eventually remove */
-
- if (!dd->ipath_hdrqtailptr) {
- ipath_dev_err(dd,
- "hdrqtailptr not set, can't do receives\n");
- goto bail;
- }
+ int last;
l = pd->port_head;
- hdrqtail = ipath_get_rcvhdrtail(pd);
- if (l == hdrqtail)
- goto bail;
+ rhf_addr = (__le32 *) pd->port_rcvhdrq + l + dd->ipath_rhf_offset;
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
+ u32 seq = ipath_hdrget_seq(rhf_addr);
+
+ if (seq != pd->port_seq_cnt)
+ goto bail;
+ hdrqtail = 0;
+ } else {
+ hdrqtail = ipath_get_rcvhdrtail(pd);
+ if (l == hdrqtail)
+ goto bail;
+ smp_rmb();
+ }
reloop:
- for (i = 0; l != hdrqtail; i++) {
- u32 qp;
- u8 *bthbytes;
-
- rc = (u64 *) (pd->port_rcvhdrq + (l << 2));
- hdr = (struct ipath_message_header *)&rc[1];
- /*
- * could make a network order version of IPATH_KD_QP, and
- * do the obvious shift before masking to speed this up.
- */
- qp = ntohl(hdr->bth[1]) & 0xffffff;
- bthbytes = (u8 *) hdr->bth;
-
- eflags = ipath_hdrget_err_flags((__le32 *) rc);
- etype = ipath_hdrget_rcv_type((__le32 *) rc);
+ for (last = 0, i = 1; !last; i++) {
+ hdr = dd->ipath_f_get_msgheader(dd, rhf_addr);
+ eflags = ipath_hdrget_err_flags(rhf_addr);
+ etype = ipath_hdrget_rcv_type(rhf_addr);
/* total length */
- tlen = ipath_hdrget_length_in_bytes((__le32 *) rc);
+ tlen = ipath_hdrget_length_in_bytes(rhf_addr);
ebuf = NULL;
- if (etype != RCVHQ_RCV_TYPE_EXPECTED) {
+ if ((dd->ipath_flags & IPATH_NODMA_RTAIL) ?
+ ipath_hdrget_use_egr_buf(rhf_addr) :
+ (etype != RCVHQ_RCV_TYPE_EXPECTED)) {
/*
- * it turns out that the chips uses an eager buffer
+ * It turns out that the chip uses an eager buffer
* for all non-expected packets, whether it "needs"
* one or not. So always get the index, but don't
* set ebuf (so we try to copy data) unless the
* length requires it.
*/
- etail = ipath_hdrget_index((__le32 *) rc);
+ etail = ipath_hdrget_index(rhf_addr);
+ updegr = 1;
if (tlen > sizeof(*hdr) ||
etype == RCVHQ_RCV_TYPE_NON_KD)
ebuf = ipath_get_egrbuf(dd, etail);
@@ -1171,75 +1226,91 @@
* packets; only ipathhdrerr should be set.
*/
- if (etype != RCVHQ_RCV_TYPE_NON_KD && etype !=
- RCVHQ_RCV_TYPE_ERROR && ipath_hdrget_ipath_ver(
- hdr->iph.ver_port_tid_offset) !=
- IPS_PROTO_VERSION) {
+ if (etype != RCVHQ_RCV_TYPE_NON_KD &&
+ etype != RCVHQ_RCV_TYPE_ERROR &&
+ ipath_hdrget_ipath_ver(hdr->iph.ver_port_tid_offset) !=
+ IPS_PROTO_VERSION)
ipath_cdbg(PKT, "Bad InfiniPath protocol version "
"%x\n", etype);
- }
if (unlikely(eflags))
- ipath_rcv_hdrerr(dd, eflags, l, etail, rc);
+ ipath_rcv_hdrerr(dd, eflags, l, etail, rhf_addr, hdr);
else if (etype == RCVHQ_RCV_TYPE_NON_KD) {
- ipath_ib_rcv(dd->verbs_dev, rc + 1, ebuf, tlen);
+ ipath_ib_rcv(dd->verbs_dev, (u32 *)hdr, ebuf, tlen);
if (dd->ipath_lli_counter)
dd->ipath_lli_counter--;
+ } else if (etype == RCVHQ_RCV_TYPE_EAGER) {
+ u8 opcode = be32_to_cpu(hdr->bth[0]) >> 24;
+ u32 qp = be32_to_cpu(hdr->bth[1]) & 0xffffff;
ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
"qp=%x), len %x; ignored\n",
- etype, bthbytes[0], qp, tlen);
+ etype, opcode, qp, tlen);
}
- else if (etype == RCVHQ_RCV_TYPE_EAGER)
- ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
- "qp=%x), len %x; ignored\n",
- etype, bthbytes[0], qp, tlen);
else if (etype == RCVHQ_RCV_TYPE_EXPECTED)
ipath_dbg("Bug: Expected TID, opcode %x; ignored\n",
- be32_to_cpu(hdr->bth[0]) & 0xff);
+ be32_to_cpu(hdr->bth[0]) >> 24);
else {
/*
* error packet, type of error unknown.
* Probably type 3, but we don't know, so don't
* even try to print the opcode, etc.
+ * Usually caused by a "bad packet", that has no
+ * BTH, when the LRH says it should.
*/
- ipath_dbg("Error Pkt, but no eflags! egrbuf %x, "
- "len %x\nhdrq@%lx;hdrq+%x rhf: %llx; "
- "hdr %llx %llx %llx %llx %llx\n",
- etail, tlen, (unsigned long) rc, l,
- (unsigned long long) rc[0],
- (unsigned long long) rc[1],
- (unsigned long long) rc[2],
- (unsigned long long) rc[3],
- (unsigned long long) rc[4],
- (unsigned long long) rc[5]);
+ ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf"
+ " %x, len %x hdrq+%x rhf: %Lx\n",
+ etail, tlen, l,
+ le64_to_cpu(*(__le64 *) rhf_addr));
+ if (ipath_debug & __IPATH_ERRPKTDBG) {
+ u32 j, *d, dw = rsize-2;
+ if (rsize > (tlen>>2))
+ dw = tlen>>2;
+ d = (u32 *)hdr;
+ printk(KERN_DEBUG "EPkt rcvhdr(%x dw):\n",
+ dw);
+ for (j = 0; j < dw; j++)
+ printk(KERN_DEBUG "%8x%s", d[j],
+ (j%8) == 7 ? "\n" : " ");
+ printk(KERN_DEBUG ".\n");
+ }
}
l += rsize;
if (l >= maxcnt)
l = 0;
- if (etype != RCVHQ_RCV_TYPE_EXPECTED)
- updegr = 1;
+ rhf_addr = (__le32 *) pd->port_rcvhdrq +
+ l + dd->ipath_rhf_offset;
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
+ u32 seq = ipath_hdrget_seq(rhf_addr);
+
+ if (++pd->port_seq_cnt > 13)
+ pd->port_seq_cnt = 1;
+ if (seq != pd->port_seq_cnt)
+ last = 1;
+ } else if (l == hdrqtail)
+ last = 1;
/*
* update head regs on last packet, and every 16 packets.
* Reduce bus traffic, while still trying to prevent
* rcvhdrq overflows, for when the queue is nearly full
*/
- if (l == hdrqtail || (i && !(i&0xf))) {
- u64 lval;
- if (l == hdrqtail)
- /* request IBA6120 interrupt only on last */
- lval = dd->ipath_rhdrhead_intr_off | l;
- else
- lval = l;
- (void)ipath_write_ureg(dd, ur_rcvhdrhead, lval, 0);
+ if (last || !(i & 0xf)) {
+ u64 lval = l;
+
+ /* request IBA6120 and 7220 interrupt only on last */
+ if (last)
+ lval |= dd->ipath_rhdrhead_intr_off;
+ ipath_write_ureg(dd, ur_rcvhdrhead, lval,
+ pd->port_port);
if (updegr) {
- (void)ipath_write_ureg(dd, ur_rcvegrindexhead,
- etail, 0);
+ ipath_write_ureg(dd, ur_rcvegrindexhead,
+ etail, pd->port_port);
updegr = 0;
}
}
}
- if (!dd->ipath_rhdrhead_intr_off && !reloop) {
+ if (!dd->ipath_rhdrhead_intr_off && !reloop &&
+ !(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
/* IBA6110 workaround; we can have a race clearing chip
* interrupt with another interrupt about to be delivered,
* and can clear it before it is delivered on the GPIO
@@ -1301,7 +1372,6 @@
* happens when all buffers are in use, so only cpu overhead, not
* latency or bandwidth is affected.
*/
-#define _IPATH_ALL_CHECKBITS 0x5555555555555555ULL
if (!dd->ipath_pioavailregs_dma) {
ipath_dbg("Update shadow pioavail, but regs_dma NULL!\n");
return;
@@ -1346,7 +1416,7 @@
piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i ^ 1]);
else
piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i]);
- pchg = _IPATH_ALL_CHECKBITS &
+ pchg = dd->ipath_pioavailkernel[i] &
~(dd->ipath_pioavailshadow[i] ^ piov);
pchbusy = pchg << INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT;
if (pchg && (pchbusy & dd->ipath_pioavailshadow[i])) {
@@ -1397,27 +1467,63 @@
return ret;
}
-/**
- * ipath_getpiobuf - find an available pio buffer
- * @dd: the infinipath device
- * @pbufnum: the buffer number is placed here
+/*
+ * debugging code and stats updates if no pio buffers available.
+ */
+static noinline void no_pio_bufs(struct ipath_devdata *dd)
+{
+ unsigned long *shadow = dd->ipath_pioavailshadow;
+ __le64 *dma = (__le64 *)dd->ipath_pioavailregs_dma;
+
+ dd->ipath_upd_pio_shadow = 1;
+
+ /*
+ * not atomic, but if we lose a stat count in a while, that's OK
+ */
+ ipath_stats.sps_nopiobufs++;
+ if (!(++dd->ipath_consec_nopiobuf % 100000)) {
+ ipath_dbg("%u pio sends with no bufavail; dmacopy: "
+ "%llx %llx %llx %llx; shadow: %lx %lx %lx %lx\n",
+ dd->ipath_consec_nopiobuf,
+ (unsigned long long) le64_to_cpu(dma[0]),
+ (unsigned long long) le64_to_cpu(dma[1]),
+ (unsigned long long) le64_to_cpu(dma[2]),
+ (unsigned long long) le64_to_cpu(dma[3]),
+ shadow[0], shadow[1], shadow[2], shadow[3]);
+ /*
+ * 4 buffers per byte, 4 registers above, cover rest
+ * below
+ */
+ if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) >
+ (sizeof(shadow[0]) * 4 * 4))
+ ipath_dbg("2nd group: dmacopy: %llx %llx "
+ "%llx %llx; shadow: %lx %lx %lx %lx\n",
+ (unsigned long long)le64_to_cpu(dma[4]),
+ (unsigned long long)le64_to_cpu(dma[5]),
+ (unsigned long long)le64_to_cpu(dma[6]),
+ (unsigned long long)le64_to_cpu(dma[7]),
+ shadow[4], shadow[5], shadow[6],
+ shadow[7]);
+ }
+}
+
+/*
+ * common code for normal driver pio buffer allocation, and reserved
+ * allocation.
*
* do appropriate marking as busy, etc.
* returns buffer number if one found (>=0), negative number is error.
- * Used by ipath_layer_send
*/
-u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 * pbufnum)
+static u32 __iomem *ipath_getpiobuf_range(struct ipath_devdata *dd,
+ u32 *pbufnum, u32 first, u32 last, u32 firsti)
{
- int i, j, starti, updated = 0;
- unsigned piobcnt, iter;
+ int i, j, updated = 0;
+ unsigned piobcnt;
unsigned long flags;
unsigned long *shadow = dd->ipath_pioavailshadow;
u32 __iomem *buf;
- piobcnt = (unsigned)(dd->ipath_piobcnt2k
- + dd->ipath_piobcnt4k);
- starti = dd->ipath_lastport_piobuf;
- iter = piobcnt - starti;
+ piobcnt = last - first;
if (dd->ipath_upd_pio_shadow) {
/*
* Minor optimization. If we had no buffers on last call,
@@ -1425,12 +1531,10 @@
* if no buffers were updated, to be paranoid
*/
ipath_update_pio_bufs(dd);
- /* we scanned here, don't do it at end of scan */
- updated = 1;
- i = starti;
+ updated++;
+ i = first;
} else
- i = dd->ipath_lastpioindex;
-
+ i = firsti;
rescan:
/*
* while test_and_set_bit() is atomic, we do that and then the
@@ -1438,104 +1542,141 @@
* of the remaining armlaunch errors.
*/
spin_lock_irqsave(&ipath_pioavail_lock, flags);
- for (j = 0; j < iter; j++, i++) {
- if (i >= piobcnt)
- i = starti;
- /*
- * To avoid bus lock overhead, we first find a candidate
- * buffer, then do the test and set, and continue if that
- * fails.
- */
- if (test_bit((2 * i) + 1, shadow) ||
- test_and_set_bit((2 * i) + 1, shadow))
+ for (j = 0; j < piobcnt; j++, i++) {
+ if (i >= last)
+ i = first;
+ if (__test_and_set_bit((2 * i) + 1, shadow))
continue;
/* flip generation bit */
- change_bit(2 * i, shadow);
+ __change_bit(2 * i, shadow);
break;
}
spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
- if (j == iter) {
- volatile __le64 *dma = dd->ipath_pioavailregs_dma;
-
- /*
- * first time through; shadow exhausted, but may be real
- * buffers available, so go see; if any updated, rescan
- * (once)
- */
+ if (j == piobcnt) {
if (!updated) {
+ /*
+ * first time through; shadow exhausted, but may be
+ * buffers available, try an update and then rescan.
+ */
ipath_update_pio_bufs(dd);
- updated = 1;
- i = starti;
+ updated++;
+ i = first;
+ goto rescan;
+ } else if (updated == 1 && piobcnt <=
+ ((dd->ipath_sendctrl
+ >> INFINIPATH_S_UPDTHRESH_SHIFT) &
+ INFINIPATH_S_UPDTHRESH_MASK)) {
+ /*
+ * for chips supporting and using the update
+ * threshold we need to force an update of the
+ * in-memory copy if the count is less than the
+ * thershold, then check one more time.
+ */
+ ipath_force_pio_avail_update(dd);
+ ipath_update_pio_bufs(dd);
+ updated++;
+ i = first;
goto rescan;
}
- dd->ipath_upd_pio_shadow = 1;
- /*
- * not atomic, but if we lose one once in a while, that's OK
- */
- ipath_stats.sps_nopiobufs++;
- if (!(++dd->ipath_consec_nopiobuf % 100000)) {
- ipath_dbg(
- "%u pio sends with no bufavail; dmacopy: "
- "%llx %llx %llx %llx; shadow: "
- "%lx %lx %lx %lx\n",
- dd->ipath_consec_nopiobuf,
- (unsigned long long) le64_to_cpu(dma[0]),
- (unsigned long long) le64_to_cpu(dma[1]),
- (unsigned long long) le64_to_cpu(dma[2]),
- (unsigned long long) le64_to_cpu(dma[3]),
- shadow[0], shadow[1], shadow[2],
- shadow[3]);
- /*
- * 4 buffers per byte, 4 registers above, cover rest
- * below
- */
- if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) >
- (sizeof(shadow[0]) * 4 * 4))
- ipath_dbg("2nd group: dmacopy: %llx %llx "
- "%llx %llx; shadow: %lx %lx "
- "%lx %lx\n",
- (unsigned long long)
- le64_to_cpu(dma[4]),
- (unsigned long long)
- le64_to_cpu(dma[5]),
- (unsigned long long)
- le64_to_cpu(dma[6]),
- (unsigned long long)
- le64_to_cpu(dma[7]),
- shadow[4], shadow[5],
- shadow[6], shadow[7]);
- }
+
+ no_pio_bufs(dd);
buf = NULL;
- goto bail;
+ } else {
+ if (i < dd->ipath_piobcnt2k)
+ buf = (u32 __iomem *) (dd->ipath_pio2kbase +
+ i * dd->ipath_palign);
+ else
+ buf = (u32 __iomem *)
+ (dd->ipath_pio4kbase +
+ (i - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
+ if (pbufnum)
+ *pbufnum = i;
}
- /*
- * set next starting place. Since it's just an optimization,
- * it doesn't matter who wins on this, so no locking
- */
- dd->ipath_lastpioindex = i + 1;
- if (dd->ipath_upd_pio_shadow)
- dd->ipath_upd_pio_shadow = 0;
- if (dd->ipath_consec_nopiobuf)
- dd->ipath_consec_nopiobuf = 0;
- if (i < dd->ipath_piobcnt2k)
- buf = (u32 __iomem *) (dd->ipath_pio2kbase +
- i * dd->ipath_palign);
- else
- buf = (u32 __iomem *)
- (dd->ipath_pio4kbase +
- (i - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
- ipath_cdbg(VERBOSE, "Return piobuf%u %uk @ %p\n",
- i, (i < dd->ipath_piobcnt2k) ? 2 : 4, buf);
- if (pbufnum)
- *pbufnum = i;
-
-bail:
return buf;
}
/**
+ * ipath_getpiobuf - find an available pio buffer
+ * @dd: the infinipath device
+ * @plen: the size of the PIO buffer needed in 32-bit words
+ * @pbufnum: the buffer number is placed here
+ */
+u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 plen, u32 *pbufnum)
+{
+ u32 __iomem *buf;
+ u32 pnum, nbufs;
+ u32 first, lasti;
+
+ if (plen + 1 >= IPATH_SMALLBUF_DWORDS) {
+ first = dd->ipath_piobcnt2k;
+ lasti = dd->ipath_lastpioindexl;
+ } else {
+ first = 0;
+ lasti = dd->ipath_lastpioindex;
+ }
+ nbufs = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
+ buf = ipath_getpiobuf_range(dd, &pnum, first, nbufs, lasti);
+
+ if (buf) {
+ /*
+ * Set next starting place. It's just an optimization,
+ * it doesn't matter who wins on this, so no locking
+ */
+ if (plen + 1 >= IPATH_SMALLBUF_DWORDS)
+ dd->ipath_lastpioindexl = pnum + 1;
+ else
+ dd->ipath_lastpioindex = pnum + 1;
+ if (dd->ipath_upd_pio_shadow)
+ dd->ipath_upd_pio_shadow = 0;
+ if (dd->ipath_consec_nopiobuf)
+ dd->ipath_consec_nopiobuf = 0;
+ ipath_cdbg(VERBOSE, "Return piobuf%u %uk @ %p\n",
+ pnum, (pnum < dd->ipath_piobcnt2k) ? 2 : 4, buf);
+ if (pbufnum)
+ *pbufnum = pnum;
+
+ }
+ return buf;
+}
+
+/**
+ * ipath_chg_pioavailkernel - change which send buffers are available for kernel
+ * @dd: the infinipath device
+ * @start: the starting send buffer number
+ * @len: the number of send buffers
+ * @avail: true if the buffers are available for kernel use, false otherwise
+ */
+void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
+ unsigned len, int avail)
+{
+ unsigned long flags;
+ unsigned end;
+
+ /* There are two bits per send buffer (busy and generation) */
+ start *= 2;
+ len *= 2;
+ end = start + len;
+
+ /* Set or clear the generation bits. */
+ spin_lock_irqsave(&ipath_pioavail_lock, flags);
+ while (start < end) {
+ if (avail) {
+ __clear_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT,
+ dd->ipath_pioavailshadow);
+ __set_bit(start, dd->ipath_pioavailkernel);
+ } else {
+ __set_bit(start + INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT,
+ dd->ipath_pioavailshadow);
+ __clear_bit(start, dd->ipath_pioavailkernel);
+ }
+ start += 2;
+ }
+ spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
+}
+
+/**
* ipath_create_rcvhdrq - create a receive header queue
* @dd: the infinipath device
* @pd: the port data
@@ -1566,19 +1707,27 @@
ret = -ENOMEM;
goto bail;
}
- pd->port_rcvhdrtail_kvaddr = dma_alloc_coherent(
- &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail, GFP_KERNEL);
- if (!pd->port_rcvhdrtail_kvaddr) {
- ipath_dev_err(dd, "attempt to allocate 1 page "
- "for port %u rcvhdrqtailaddr failed\n",
- pd->port_port);
- ret = -ENOMEM;
- dma_free_coherent(&dd->pcidev->dev, amt,
- pd->port_rcvhdrq, pd->port_rcvhdrq_phys);
- pd->port_rcvhdrq = NULL;
- goto bail;
+
+ if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
+ pd->port_rcvhdrtail_kvaddr = dma_alloc_coherent(
+ &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail,
+ GFP_KERNEL);
+ if (!pd->port_rcvhdrtail_kvaddr) {
+ ipath_dev_err(dd, "attempt to allocate 1 page "
+ "for port %u rcvhdrqtailaddr "
+ "failed\n", pd->port_port);
+ ret = -ENOMEM;
+ dma_free_coherent(&dd->pcidev->dev, amt,
+ pd->port_rcvhdrq,
+ pd->port_rcvhdrq_phys);
+ pd->port_rcvhdrq = NULL;
+ goto bail;
+ }
+ pd->port_rcvhdrqtailaddr_phys = phys_hdrqtail;
+ ipath_cdbg(VERBOSE, "port %d hdrtailaddr, %llx "
+ "physical\n", pd->port_port,
+ (unsigned long long) phys_hdrqtail);
}
- pd->port_rcvhdrqtailaddr_phys = phys_hdrqtail;
pd->port_rcvhdrq_size = amt;
@@ -1588,10 +1737,6 @@
(unsigned long) pd->port_rcvhdrq_phys,
(unsigned long) pd->port_rcvhdrq_size,
pd->port_port);
-
- ipath_cdbg(VERBOSE, "port %d hdrtailaddr, %llx physical\n",
- pd->port_port,
- (unsigned long long) phys_hdrqtail);
}
else
ipath_cdbg(VERBOSE, "reuse port %d rcvhdrq @%p %llx phys; "
@@ -1615,7 +1760,6 @@
ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
pd->port_port, pd->port_rcvhdrq_phys);
- ret = 0;
bail:
return ret;
}
@@ -1632,52 +1776,149 @@
*/
void ipath_cancel_sends(struct ipath_devdata *dd, int restore_sendctrl)
{
- ipath_dbg("Cancelling all in-progress send buffers\n");
- dd->ipath_lastcancel = jiffies+HZ/2; /* skip armlaunch errs a bit */
- /*
- * the abort bit is auto-clearing. We read scratch to be sure
- * that cancels and the abort have taken effect in the chip.
- */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- INFINIPATH_S_ABORT);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- ipath_disarm_piobufs(dd, 0,
- (unsigned)(dd->ipath_piobcnt2k + dd->ipath_piobcnt4k));
- if (restore_sendctrl) /* else done by caller later */
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
+ unsigned long flags;
- /* and again, be sure all have hit the chip */
+ if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) {
+ ipath_cdbg(VERBOSE, "Ignore while in autonegotiation\n");
+ goto bail;
+ }
+ /*
+ * If we have SDMA, and it's not disabled, we have to kick off the
+ * abort state machine, provided we aren't already aborting.
+ * If we are in the process of aborting SDMA (!DISABLED, but ABORTING),
+ * we skip the rest of this routine. It is already "in progress"
+ */
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA) {
+ int skip_cancel;
+ u64 *statp = &dd->ipath_sdma_status;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ skip_cancel =
+ !test_bit(IPATH_SDMA_DISABLED, statp) &&
+ test_and_set_bit(IPATH_SDMA_ABORTING, statp);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (skip_cancel)
+ goto bail;
+ }
+
+ ipath_dbg("Cancelling all in-progress send buffers\n");
+
+ /* skip armlaunch errs for a while */
+ dd->ipath_lastcancel = jiffies + HZ / 2;
+
+ /*
+ * The abort bit is auto-clearing. We also don't want pioavail
+ * update happening during this, and we don't want any other
+ * sends going out, so turn those off for the duration. We read
+ * the scratch register to be sure that cancels and the abort
+ * have taken effect in the chip. Otherwise two parts are same
+ * as ipath_force_pio_avail_update()
+ */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~(INFINIPATH_S_PIOBUFAVAILUPD
+ | INFINIPATH_S_PIOENABLE);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl | INFINIPATH_S_ABORT);
ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ /* disarm all send buffers */
+ ipath_disarm_piobufs(dd, 0,
+ dd->ipath_piobcnt2k + dd->ipath_piobcnt4k);
+
+ if (restore_sendctrl) {
+ /* else done by caller later if needed */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl |= INFINIPATH_S_PIOBUFAVAILUPD |
+ INFINIPATH_S_PIOENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ /* and again, be sure all have hit the chip */
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
+
+ if ((dd->ipath_flags & IPATH_HAS_SEND_DMA) &&
+ !test_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status) &&
+ test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)) {
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ /* only wait so long for intr */
+ dd->ipath_sdma_abort_intr_timeout = jiffies + HZ;
+ dd->ipath_sdma_reset_wait = 200;
+ __set_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
+ if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ }
+bail:;
}
-
-static void ipath_set_ib_lstate(struct ipath_devdata *dd, int which)
+/*
+ * Force an update of in-memory copy of the pioavail registers, when
+ * needed for any of a variety of reasons. We read the scratch register
+ * to make it highly likely that the update will have happened by the
+ * time we return. If already off (as in cancel_sends above), this
+ * routine is a nop, on the assumption that the caller will "do the
+ * right thing".
+ */
+void ipath_force_pio_avail_update(struct ipath_devdata *dd)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ if (dd->ipath_sendctrl & INFINIPATH_S_PIOBUFAVAILUPD) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl & ~INFINIPATH_S_PIOBUFAVAILUPD);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ }
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+}
+
+static void ipath_set_ib_lstate(struct ipath_devdata *dd, int linkcmd,
+ int linitcmd)
+{
+ u64 mod_wd;
static const char *what[4] = {
[0] = "NOP",
[INFINIPATH_IBCC_LINKCMD_DOWN] = "DOWN",
[INFINIPATH_IBCC_LINKCMD_ARMED] = "ARMED",
[INFINIPATH_IBCC_LINKCMD_ACTIVE] = "ACTIVE"
};
- int linkcmd = (which >> INFINIPATH_IBCC_LINKCMD_SHIFT) &
- INFINIPATH_IBCC_LINKCMD_MASK;
- ipath_cdbg(VERBOSE, "Trying to move unit %u to %s, current ltstate "
- "is %s\n", dd->ipath_unit,
- what[linkcmd],
- ipath_ibcstatus_str[
- (ipath_read_kreg64
- (dd, dd->ipath_kregs->kr_ibcstatus) >>
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKTRAININGSTATE_MASK]);
- /* flush all queued sends when going to DOWN to be sure that
- * they don't block MAD packets */
- if (linkcmd == INFINIPATH_IBCC_LINKCMD_DOWN)
- ipath_cancel_sends(dd, 1);
+ if (linitcmd == INFINIPATH_IBCC_LINKINITCMD_DISABLE) {
+ /*
+ * If we are told to disable, note that so link-recovery
+ * code does not attempt to bring us back up.
+ */
+ preempt_disable();
+ dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
+ preempt_enable();
+ } else if (linitcmd) {
+ /*
+ * Any other linkinitcmd will lead to LINKDOWN and then
+ * to INIT (if all is well), so clear flag to let
+ * link-recovery code attempt to bring us back up.
+ */
+ preempt_disable();
+ dd->ipath_flags &= ~IPATH_IB_LINK_DISABLED;
+ preempt_enable();
+ }
+
+ mod_wd = (linkcmd << dd->ibcc_lc_shift) |
+ (linitcmd << INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ ipath_cdbg(VERBOSE,
+ "Moving unit %u to %s (initcmd=0x%x), current ltstate is %s\n",
+ dd->ipath_unit, what[linkcmd], linitcmd,
+ ipath_ibcstatus_str[ipath_ib_linktrstate(dd,
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus))]);
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
- dd->ipath_ibcctrl | which);
+ dd->ipath_ibcctrl | mod_wd);
+ /* read from chip so write is flushed */
+ (void) ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
}
int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate)
@@ -1687,30 +1928,28 @@
switch (newstate) {
case IPATH_IB_LINKDOWN_ONLY:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN <<
- INFINIPATH_IBCC_LINKCMD_SHIFT);
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN, 0);
/* don't wait */
ret = 0;
goto bail;
case IPATH_IB_LINKDOWN:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_POLL <<
- INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
+ INFINIPATH_IBCC_LINKINITCMD_POLL);
/* don't wait */
ret = 0;
goto bail;
case IPATH_IB_LINKDOWN_SLEEP:
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_SLEEP <<
- INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
+ INFINIPATH_IBCC_LINKINITCMD_SLEEP);
/* don't wait */
ret = 0;
goto bail;
case IPATH_IB_LINKDOWN_DISABLE:
- ipath_set_ib_lstate(dd,
- INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
- INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_DOWN,
+ INFINIPATH_IBCC_LINKINITCMD_DISABLE);
/* don't wait */
ret = 0;
goto bail;
@@ -1725,8 +1964,8 @@
ret = -EINVAL;
goto bail;
}
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ARMED <<
- INFINIPATH_IBCC_LINKCMD_SHIFT);
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ARMED, 0);
+
/*
* Since the port can transition to ACTIVE by receiving
* a non VL 15 packet, wait for either state.
@@ -1743,8 +1982,7 @@
ret = -EINVAL;
goto bail;
}
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ACTIVE <<
- INFINIPATH_IBCC_LINKCMD_SHIFT);
+ ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ACTIVE, 0);
lstate = IPATH_LINKACTIVE;
break;
@@ -1753,16 +1991,41 @@
dd->ipath_ibcctrl |= INFINIPATH_IBCC_LOOPBACK;
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
dd->ipath_ibcctrl);
+
+ /* turn heartbeat off, as it causes loopback to fail */
+ dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_OFF);
+ /* don't wait */
ret = 0;
- goto bail; // no state change to wait for
+ goto bail;
case IPATH_IB_LINK_EXTERNAL:
- dev_info(&dd->pcidev->dev, "Disabling IB local loopback (normal)\n");
+ dev_info(&dd->pcidev->dev,
+ "Disabling IB local loopback (normal)\n");
+ dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_ON);
dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LOOPBACK;
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
dd->ipath_ibcctrl);
+ /* don't wait */
ret = 0;
- goto bail; // no state change to wait for
+ goto bail;
+
+ /*
+ * Heartbeat can be explicitly enabled by the user via
+ * "hrtbt_enable" "file", and if disabled, trying to enable here
+ * will have no effect. Implicit changes (heartbeat off when
+ * loopback on, and vice versa) are included to ease testing.
+ */
+ case IPATH_IB_LINK_HRTBT:
+ ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_ON);
+ goto bail;
+
+ case IPATH_IB_LINK_NO_HRTBT:
+ ret = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_HRTBT,
+ IPATH_IB_HRTBT_OFF);
+ goto bail;
default:
ipath_dbg("Invalid linkstate 0x%x requested\n", newstate);
@@ -1785,7 +2048,7 @@
* sanity checking on this, and we don't deal with what happens to
* programs that are already running when the size changes.
* NOTE: changing the MTU will usually cause the IBC to go back to
- * link initialize (IPATH_IBSTATE_INIT) state...
+ * link INIT state...
*/
int ipath_set_mtu(struct ipath_devdata *dd, u16 arg)
{
@@ -1800,7 +2063,7 @@
* piosize). We check that it's one of the valid IB sizes.
*/
if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 &&
- arg != 4096) {
+ (arg != 4096 || !ipath_mtu4096)) {
ipath_dbg("Trying to set invalid mtu %u, failing\n", arg);
ret = -EINVAL;
goto bail;
@@ -1816,6 +2079,8 @@
if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) {
/* Only if it's not the initial value (or reset to it) */
if (piosize != dd->ipath_init_ibmaxlen) {
+ if (arg > piosize && arg <= dd->ipath_init_ibmaxlen)
+ piosize = dd->ipath_init_ibmaxlen;
dd->ipath_ibmaxlen = piosize;
changed = 1;
}
@@ -1829,24 +2094,17 @@
}
if (changed) {
+ u64 ibc = dd->ipath_ibcctrl, ibdw;
/*
- * set the IBC maxpktlength to the size of our pio
- * buffers in words
+ * update our housekeeping variables, and set IBC max
+ * size, same as init code; max IBC is max we allow in
+ * buffer, less the qword pbc, plus 1 for ICRC, in dwords
*/
- u64 ibc = dd->ipath_ibcctrl;
+ dd->ipath_ibmaxlen = piosize - 2 * sizeof(u32);
+ ibdw = (dd->ipath_ibmaxlen >> 2) + 1;
ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK <<
- INFINIPATH_IBCC_MAXPKTLEN_SHIFT);
-
- piosize = piosize - 2 * sizeof(u32); /* ignore pbc */
- dd->ipath_ibmaxlen = piosize;
- piosize /= sizeof(u32); /* in words */
- /*
- * for ICRC, which we only send in diag test pkt mode, and
- * we don't need to worry about that for mtu
- */
- piosize += 1;
-
- ibc |= piosize << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
+ dd->ibcc_mpl_shift);
+ ibc |= ibdw << dd->ibcc_mpl_shift;
dd->ipath_ibcctrl = ibc;
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
dd->ipath_ibcctrl);
@@ -1859,11 +2117,16 @@
return ret;
}
-int ipath_set_lid(struct ipath_devdata *dd, u32 arg, u8 lmc)
+int ipath_set_lid(struct ipath_devdata *dd, u32 lid, u8 lmc)
{
- dd->ipath_lid = arg;
+ dd->ipath_lid = lid;
dd->ipath_lmc = lmc;
+ dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LIDLMC, lid |
+ (~((1U << lmc) - 1)) << 16);
+
+ dev_info(&dd->pcidev->dev, "We got a lid: 0x%x\n", lid);
+
return 0;
}
@@ -1925,10 +2188,8 @@
* but leave that to per-chip functions.
*/
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
- ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
- lstate = (val >> INFINIPATH_IBCS_LINKSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKSTATE_MASK;
+ ltstate = ipath_ib_linktrstate(dd, val);
+ lstate = ipath_ib_linkstate(dd, val);
dd->ipath_f_setextled(dd, lstate, ltstate);
mod_timer(&dd->ipath_led_override_timer, jiffies + timeoff);
@@ -1969,9 +2230,8 @@
dd->ipath_led_override_timer.data = (unsigned long) dd;
dd->ipath_led_override_timer.expires = jiffies + 1;
add_timer(&dd->ipath_led_override_timer);
- } else {
+ } else
atomic_dec(&dd->ipath_led_override_timer_active);
- }
}
/**
@@ -1989,6 +2249,8 @@
ipath_dbg("Shutting down the device\n");
+ ipath_hol_up(dd); /* make sure user processes aren't suspended */
+
dd->ipath_flags |= IPATH_LINKUNK;
dd->ipath_flags &= ~(IPATH_INITTED | IPATH_LINKDOWN |
IPATH_LINKINIT | IPATH_LINKARMED |
@@ -2003,6 +2265,9 @@
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl);
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ teardown_sdma(dd);
+
/*
* gracefully stop all sends allowing any in progress to trickle out
* first.
@@ -2020,10 +2285,16 @@
*/
udelay(5);
- ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
- INFINIPATH_IBCC_LINKINITCMD_SHIFT);
+ dd->ipath_f_setextled(dd, 0, 0); /* make sure LEDs are off */
+
+ ipath_set_ib_lstate(dd, 0, INFINIPATH_IBCC_LINKINITCMD_DISABLE);
ipath_cancel_sends(dd, 0);
+ /*
+ * we are shutting down, so tell components that care. We don't do
+ * this on just a link state change, much like ethernet, a cable
+ * unplug, etc. doesn't change driver state
+ */
signal_ib_event(dd, IB_EVENT_PORT_ERR);
/* disable IBC */
@@ -2038,10 +2309,20 @@
*/
dd->ipath_f_quiet_serdes(dd);
+ /* stop all the timers that might still be running */
+ del_timer_sync(&dd->ipath_hol_timer);
if (dd->ipath_stats_timer_active) {
del_timer_sync(&dd->ipath_stats_timer);
dd->ipath_stats_timer_active = 0;
}
+ if (dd->ipath_intrchk_timer.data) {
+ del_timer_sync(&dd->ipath_intrchk_timer);
+ dd->ipath_intrchk_timer.data = 0;
+ }
+ if (atomic_read(&dd->ipath_led_override_timer_active)) {
+ del_timer_sync(&dd->ipath_led_override_timer);
+ atomic_set(&dd->ipath_led_override_timer_active, 0);
+ }
/*
* clear all interrupts and errors, so that the next time the driver
@@ -2115,13 +2396,13 @@
ipath_cdbg(VERBOSE, "free closed port %d "
"ipath_port0_skbinfo @ %p\n", pd->port_port,
skbinfo);
- for (e = 0; e < dd->ipath_rcvegrcnt; e++)
- if (skbinfo[e].skb) {
- pci_unmap_single(dd->pcidev, skbinfo[e].phys,
- dd->ipath_ibmaxlen,
- PCI_DMA_FROMDEVICE);
- dev_kfree_skb(skbinfo[e].skb);
- }
+ for (e = 0; e < dd->ipath_p0_rcvegrcnt; e++)
+ if (skbinfo[e].skb) {
+ pci_unmap_single(dd->pcidev, skbinfo[e].phys,
+ dd->ipath_ibmaxlen,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(skbinfo[e].skb);
+ }
vfree(skbinfo);
}
kfree(pd->port_tid_pg_list);
@@ -2144,6 +2425,7 @@
*/
idr_init(&unit_table);
if (!idr_pre_get(&unit_table, GFP_KERNEL)) {
+ printk(KERN_ERR IPATH_DRV_NAME ": idr_pre_get() failed\n");
ret = -ENOMEM;
goto bail;
}
@@ -2235,13 +2517,18 @@
}
}
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ teardown_sdma(dd);
+
dd->ipath_flags &= ~IPATH_INITTED;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
ret = dd->ipath_f_reset(dd);
- if (ret != 1)
- ipath_dbg("reset was not successful\n");
- ipath_dbg("Trying to reinitialize unit %u after reset attempt\n",
- unit);
- ret = ipath_init_chip(dd, 1);
+ if (ret == 1) {
+ ipath_dbg("Reinitializing unit %u after reset attempt\n",
+ unit);
+ ret = ipath_init_chip(dd, 1);
+ } else
+ ret = -EAGAIN;
if (ret)
ipath_dev_err(dd, "Reinitialize unit %u after "
"reset failed with %d\n", unit, ret);
@@ -2253,13 +2540,121 @@
return ret;
}
+/*
+ * send a signal to all the processes that have the driver open
+ * through the normal interfaces (i.e., everything other than diags
+ * interface). Returns number of signalled processes.
+ */
+static int ipath_signal_procs(struct ipath_devdata *dd, int sig)
+{
+ int i, sub, any = 0;
+ pid_t pid;
+
+ if (!dd->ipath_pd)
+ return 0;
+ for (i = 1; i < dd->ipath_cfgports; i++) {
+ if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt ||
+ !dd->ipath_pd[i]->port_pid)
+ continue;
+ pid = dd->ipath_pd[i]->port_pid;
+ dev_info(&dd->pcidev->dev, "context %d in use "
+ "(PID %u), sending signal %d\n",
+ i, pid, sig);
+ kill_proc(pid, sig, 1);
+ any++;
+ for (sub = 0; sub < INFINIPATH_MAX_SUBPORT; sub++) {
+ pid = dd->ipath_pd[i]->port_subpid[sub];
+ if (!pid)
+ continue;
+ dev_info(&dd->pcidev->dev, "sub-context "
+ "%d:%d in use (PID %u), sending "
+ "signal %d\n", i, sub, pid, sig);
+ kill_proc(pid, sig, 1);
+ any++;
+ }
+ }
+ return any;
+}
+
+static void ipath_hol_signal_down(struct ipath_devdata *dd)
+{
+ if (ipath_signal_procs(dd, SIGSTOP))
+ ipath_dbg("Stopped some processes\n");
+ ipath_cancel_sends(dd, 1);
+}
+
+
+static void ipath_hol_signal_up(struct ipath_devdata *dd)
+{
+ if (ipath_signal_procs(dd, SIGCONT))
+ ipath_dbg("Continued some processes\n");
+}
+
+/*
+ * link is down, stop any users processes, and flush pending sends
+ * to prevent HoL blocking, then start the HoL timer that
+ * periodically continues, then stop procs, so they can detect
+ * link down if they want, and do something about it.
+ * Timer may already be running, so use __mod_timer, not add_timer.
+ */
+void ipath_hol_down(struct ipath_devdata *dd)
+{
+ dd->ipath_hol_state = IPATH_HOL_DOWN;
+ ipath_hol_signal_down(dd);
+ dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
+ dd->ipath_hol_timer.expires = jiffies +
+ msecs_to_jiffies(ipath_hol_timeout_ms);
+ __mod_timer(&dd->ipath_hol_timer, dd->ipath_hol_timer.expires);
+}
+
+/*
+ * link is up, continue any user processes, and ensure timer
+ * is a nop, if running. Let timer keep running, if set; it
+ * will nop when it sees the link is up
+ */
+void ipath_hol_up(struct ipath_devdata *dd)
+{
+ ipath_hol_signal_up(dd);
+ dd->ipath_hol_state = IPATH_HOL_UP;
+}
+
+/*
+ * toggle the running/not running state of user proceses
+ * to prevent HoL blocking on chip resources, but still allow
+ * user processes to do link down special case handling.
+ * Should only be called via the timer
+ */
+void ipath_hol_event(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+
+ if (dd->ipath_hol_next == IPATH_HOL_DOWNSTOP
+ && dd->ipath_hol_state != IPATH_HOL_UP) {
+ dd->ipath_hol_next = IPATH_HOL_DOWNCONT;
+ ipath_dbg("Stopping processes\n");
+ ipath_hol_signal_down(dd);
+ } else { /* may do "extra" if also in ipath_hol_up() */
+ dd->ipath_hol_next = IPATH_HOL_DOWNSTOP;
+ ipath_dbg("Continuing processes\n");
+ ipath_hol_signal_up(dd);
+ }
+ if (dd->ipath_hol_state == IPATH_HOL_UP)
+ ipath_dbg("link's up, don't resched timer\n");
+ else {
+ dd->ipath_hol_timer.expires = jiffies +
+ msecs_to_jiffies(ipath_hol_timeout_ms);
+ __mod_timer(&dd->ipath_hol_timer,
+ dd->ipath_hol_timer.expires);
+ }
+}
+
int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv)
{
u64 val;
- if ( new_pol_inv > INFINIPATH_XGXS_RX_POL_MASK ) {
+
+ if (new_pol_inv > INFINIPATH_XGXS_RX_POL_MASK)
return -1;
- }
- if ( dd->ipath_rx_pol_inv != new_pol_inv ) {
+ if (dd->ipath_rx_pol_inv != new_pol_inv) {
dd->ipath_rx_pol_inv = new_pol_inv;
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
index e28a42f..dc37277 100644
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -62,6 +62,33 @@
* accessing eeprom contents from within the kernel, only via sysfs.
*/
+/* Added functionality for IBA7220-based cards */
+#define IPATH_EEPROM_DEV_V1 0xA0
+#define IPATH_EEPROM_DEV_V2 0xA2
+#define IPATH_TEMP_DEV 0x98
+#define IPATH_BAD_DEV (IPATH_EEPROM_DEV_V2+2)
+#define IPATH_NO_DEV (0xFF)
+
+/*
+ * The number of I2C chains is proliferating. Table below brings
+ * some order to the madness. The basic principle is that the
+ * table is scanned from the top, and a "probe" is made to the
+ * device probe_dev. If that succeeds, the chain is considered
+ * to be of that type, and dd->i2c_chain_type is set to the index+1
+ * of the entry.
+ * The +1 is so static initialization can mean "unknown, do probe."
+ */
+static struct i2c_chain_desc {
+ u8 probe_dev; /* If seen at probe, chain is this type */
+ u8 eeprom_dev; /* Dev addr (if any) for EEPROM */
+ u8 temp_dev; /* Dev Addr (if any) for Temp-sense */
+} i2c_chains[] = {
+ { IPATH_BAD_DEV, IPATH_NO_DEV, IPATH_NO_DEV }, /* pre-iba7220 bds */
+ { IPATH_EEPROM_DEV_V1, IPATH_EEPROM_DEV_V1, IPATH_TEMP_DEV}, /* V1 */
+ { IPATH_EEPROM_DEV_V2, IPATH_EEPROM_DEV_V2, IPATH_TEMP_DEV}, /* V2 */
+ { IPATH_NO_DEV }
+};
+
enum i2c_type {
i2c_line_scl = 0,
i2c_line_sda
@@ -75,13 +102,6 @@
#define READ_CMD 1
#define WRITE_CMD 0
-static int eeprom_init;
-
-/*
- * The gpioval manipulation really should be protected by spinlocks
- * or be converted to use atomic operations.
- */
-
/**
* i2c_gpio_set - set a GPIO line
* @dd: the infinipath device
@@ -241,6 +261,27 @@
}
/**
+ * rd_byte - read a byte, leaving ACK, STOP, etc up to caller
+ * @dd: the infinipath device
+ *
+ * Returns byte shifted out of device
+ */
+static int rd_byte(struct ipath_devdata *dd)
+{
+ int bit_cntr, data;
+
+ data = 0;
+
+ for (bit_cntr = 7; bit_cntr >= 0; --bit_cntr) {
+ data <<= 1;
+ scl_out(dd, i2c_line_high);
+ data |= sda_in(dd, 0);
+ scl_out(dd, i2c_line_low);
+ }
+ return data;
+}
+
+/**
* wr_byte - write a byte, one bit at a time
* @dd: the infinipath device
* @data: the byte to write
@@ -331,7 +372,6 @@
ipath_cdbg(VERBOSE, "Resetting i2c eeprom; initial gpioout reg "
"is %llx\n", (unsigned long long) *gpioval);
- eeprom_init = 1;
/*
* This is to get the i2c into a known state, by first going low,
* then tristate sda (and then tristate scl as first thing
@@ -340,12 +380,17 @@
scl_out(dd, i2c_line_low);
sda_out(dd, i2c_line_high);
+ /* Clock up to 9 cycles looking for SDA hi, then issue START and STOP */
while (clock_cycles_left--) {
scl_out(dd, i2c_line_high);
+ /* SDA seen high, issue START by dropping it while SCL high */
if (sda_in(dd, 0)) {
sda_out(dd, i2c_line_low);
scl_out(dd, i2c_line_low);
+ /* ATMEL spec says must be followed by STOP. */
+ scl_out(dd, i2c_line_high);
+ sda_out(dd, i2c_line_high);
ret = 0;
goto bail;
}
@@ -359,29 +404,121 @@
return ret;
}
-/**
- * ipath_eeprom_read - receives bytes from the eeprom via I2C
- * @dd: the infinipath device
- * @eeprom_offset: address to read from
- * @buffer: where to store result
- * @len: number of bytes to receive
+/*
+ * Probe for I2C device at specified address. Returns 0 for "success"
+ * to match rest of this file.
+ * Leave bus in "reasonable" state for further commands.
*/
+static int i2c_probe(struct ipath_devdata *dd, int devaddr)
+{
+ int ret = 0;
+
+ ret = eeprom_reset(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Failed reset probing device 0x%02X\n",
+ devaddr);
+ return ret;
+ }
+ /*
+ * Reset no longer leaves bus in start condition, so normal
+ * i2c_startcmd() will do.
+ */
+ ret = i2c_startcmd(dd, devaddr | READ_CMD);
+ if (ret)
+ ipath_cdbg(VERBOSE, "Failed startcmd for device 0x%02X\n",
+ devaddr);
+ else {
+ /*
+ * Device did respond. Complete a single-byte read, because some
+ * devices apparently cannot handle STOP immediately after they
+ * ACK the start-cmd.
+ */
+ int data;
+ data = rd_byte(dd);
+ stop_cmd(dd);
+ ipath_cdbg(VERBOSE, "Response from device 0x%02X\n", devaddr);
+ }
+ return ret;
+}
+
+/*
+ * Returns the "i2c type". This is a pointer to a struct that describes
+ * the I2C chain on this board. To minimize impact on struct ipath_devdata,
+ * the (small integer) index into the table is actually memoized, rather
+ * then the pointer.
+ * Memoization is because the type is determined on the first call per chip.
+ * An alternative would be to move type determination to early
+ * init code.
+ */
+static struct i2c_chain_desc *ipath_i2c_type(struct ipath_devdata *dd)
+{
+ int idx;
+
+ /* Get memoized index, from previous successful probes */
+ idx = dd->ipath_i2c_chain_type - 1;
+ if (idx >= 0 && idx < (ARRAY_SIZE(i2c_chains) - 1))
+ goto done;
+
+ idx = 0;
+ while (i2c_chains[idx].probe_dev != IPATH_NO_DEV) {
+ /* if probe succeeds, this is type */
+ if (!i2c_probe(dd, i2c_chains[idx].probe_dev))
+ break;
+ ++idx;
+ }
+
+ /*
+ * Old EEPROM (first entry) may require a reset after probe,
+ * rather than being able to "start" after "stop"
+ */
+ if (idx == 0)
+ eeprom_reset(dd);
+
+ if (i2c_chains[idx].probe_dev == IPATH_NO_DEV)
+ idx = -1;
+ else
+ dd->ipath_i2c_chain_type = idx + 1;
+done:
+ return (idx >= 0) ? i2c_chains + idx : NULL;
+}
static int ipath_eeprom_internal_read(struct ipath_devdata *dd,
u8 eeprom_offset, void *buffer, int len)
{
- /* compiler complains unless initialized */
- u8 single_byte = 0;
- int bit_cntr;
int ret;
+ struct i2c_chain_desc *icd;
+ u8 *bp = buffer;
- if (!eeprom_init)
- eeprom_reset(dd);
+ ret = 1;
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
- eeprom_offset = (eeprom_offset << 1) | READ_CMD;
-
- if (i2c_startcmd(dd, eeprom_offset)) {
- ipath_dbg("Failed startcmd\n");
+ if (icd->eeprom_dev == IPATH_NO_DEV) {
+ /* legacy not-really-I2C */
+ ipath_cdbg(VERBOSE, "Start command only address\n");
+ eeprom_offset = (eeprom_offset << 1) | READ_CMD;
+ ret = i2c_startcmd(dd, eeprom_offset);
+ } else {
+ /* Actual I2C */
+ ipath_cdbg(VERBOSE, "Start command uses devaddr\n");
+ if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
+ ipath_dbg("Failed EEPROM startcmd\n");
+ stop_cmd(dd);
+ ret = 1;
+ goto bail;
+ }
+ ret = wr_byte(dd, eeprom_offset);
+ stop_cmd(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Failed to write EEPROM address\n");
+ ret = 1;
+ goto bail;
+ }
+ ret = i2c_startcmd(dd, icd->eeprom_dev | READ_CMD);
+ }
+ if (ret) {
+ ipath_dbg("Failed startcmd for dev %02X\n", icd->eeprom_dev);
stop_cmd(dd);
ret = 1;
goto bail;
@@ -392,22 +529,11 @@
* incrementing the address.
*/
while (len-- > 0) {
- /* get data */
- single_byte = 0;
- for (bit_cntr = 8; bit_cntr; bit_cntr--) {
- u8 bit;
- scl_out(dd, i2c_line_high);
- bit = sda_in(dd, 0);
- single_byte |= bit << (bit_cntr - 1);
- scl_out(dd, i2c_line_low);
- }
-
+ /* get and store data */
+ *bp++ = rd_byte(dd);
/* send ack if not the last byte */
if (len)
send_ack(dd);
-
- *((u8 *) buffer) = single_byte;
- buffer++;
}
stop_cmd(dd);
@@ -418,31 +544,40 @@
return ret;
}
-
-/**
- * ipath_eeprom_write - writes data to the eeprom via I2C
- * @dd: the infinipath device
- * @eeprom_offset: where to place data
- * @buffer: data to write
- * @len: number of bytes to write
- */
static int ipath_eeprom_internal_write(struct ipath_devdata *dd, u8 eeprom_offset,
const void *buffer, int len)
{
- u8 single_byte;
int sub_len;
const u8 *bp = buffer;
int max_wait_time, i;
int ret;
+ struct i2c_chain_desc *icd;
- if (!eeprom_init)
- eeprom_reset(dd);
+ ret = 1;
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
while (len > 0) {
- if (i2c_startcmd(dd, (eeprom_offset << 1) | WRITE_CMD)) {
- ipath_dbg("Failed to start cmd offset %u\n",
- eeprom_offset);
- goto failed_write;
+ if (icd->eeprom_dev == IPATH_NO_DEV) {
+ if (i2c_startcmd(dd,
+ (eeprom_offset << 1) | WRITE_CMD)) {
+ ipath_dbg("Failed to start cmd offset %u\n",
+ eeprom_offset);
+ goto failed_write;
+ }
+ } else {
+ /* Real I2C */
+ if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
+ ipath_dbg("Failed EEPROM startcmd\n");
+ goto failed_write;
+ }
+ ret = wr_byte(dd, eeprom_offset);
+ if (ret) {
+ ipath_dev_err(dd, "Failed to write EEPROM "
+ "address\n");
+ goto failed_write;
+ }
}
sub_len = min(len, 4);
@@ -468,9 +603,11 @@
* the writes have completed. We do this inline to avoid
* the debug prints that are in the real read routine
* if the startcmd fails.
+ * We also use the proper device address, so it doesn't matter
+ * whether we have real eeprom_dev. legacy likes any address.
*/
max_wait_time = 100;
- while (i2c_startcmd(dd, READ_CMD)) {
+ while (i2c_startcmd(dd, icd->eeprom_dev | READ_CMD)) {
stop_cmd(dd);
if (!--max_wait_time) {
ipath_dbg("Did not get successful read to "
@@ -478,15 +615,8 @@
goto failed_write;
}
}
- /* now read the zero byte */
- for (i = single_byte = 0; i < 8; i++) {
- u8 bit;
- scl_out(dd, i2c_line_high);
- bit = sda_in(dd, 0);
- scl_out(dd, i2c_line_low);
- single_byte <<= 1;
- single_byte |= bit;
- }
+ /* now read (and ignore) the resulting byte */
+ rd_byte(dd);
stop_cmd(dd);
}
@@ -501,9 +631,12 @@
return ret;
}
-/*
- * The public entry-points ipath_eeprom_read() and ipath_eeprom_write()
- * are now just wrappers around the internal functions.
+/**
+ * ipath_eeprom_read - receives bytes from the eeprom via I2C
+ * @dd: the infinipath device
+ * @eeprom_offset: address to read from
+ * @buffer: where to store result
+ * @len: number of bytes to receive
*/
int ipath_eeprom_read(struct ipath_devdata *dd, u8 eeprom_offset,
void *buff, int len)
@@ -519,6 +652,13 @@
return ret;
}
+/**
+ * ipath_eeprom_write - writes data to the eeprom via I2C
+ * @dd: the infinipath device
+ * @eeprom_offset: where to place data
+ * @buffer: data to write
+ * @len: number of bytes to write
+ */
int ipath_eeprom_write(struct ipath_devdata *dd, u8 eeprom_offset,
const void *buff, int len)
{
@@ -820,7 +960,7 @@
* if we log an hour at 31 minutes, then we would need to set
* active_time to -29 to accurately count the _next_ hour.
*/
- if (new_time > 3600) {
+ if (new_time >= 3600) {
new_hrs = new_time / 3600;
atomic_sub((new_hrs * 3600), &dd->ipath_active_time);
new_hrs += dd->ipath_eep_hrs;
@@ -885,3 +1025,159 @@
spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
return;
}
+
+static int ipath_tempsense_internal_read(struct ipath_devdata *dd, u8 regnum)
+{
+ int ret;
+ struct i2c_chain_desc *icd;
+
+ ret = -ENOENT;
+
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
+
+ if (icd->temp_dev == IPATH_NO_DEV) {
+ /* tempsense only exists on new, real-I2C boards */
+ ret = -ENXIO;
+ goto bail;
+ }
+
+ if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
+ ipath_dbg("Failed tempsense startcmd\n");
+ stop_cmd(dd);
+ ret = -ENXIO;
+ goto bail;
+ }
+ ret = wr_byte(dd, regnum);
+ stop_cmd(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Failed tempsense WR command %02X\n",
+ regnum);
+ ret = -ENXIO;
+ goto bail;
+ }
+ if (i2c_startcmd(dd, icd->temp_dev | READ_CMD)) {
+ ipath_dbg("Failed tempsense RD startcmd\n");
+ stop_cmd(dd);
+ ret = -ENXIO;
+ goto bail;
+ }
+ /*
+ * We can only clock out one byte per command, sensibly
+ */
+ ret = rd_byte(dd);
+ stop_cmd(dd);
+
+bail:
+ return ret;
+}
+
+#define VALID_TS_RD_REG_MASK 0xBF
+
+/**
+ * ipath_tempsense_read - read register of temp sensor via I2C
+ * @dd: the infinipath device
+ * @regnum: register to read from
+ *
+ * returns reg contents (0..255) or < 0 for error
+ */
+int ipath_tempsense_read(struct ipath_devdata *dd, u8 regnum)
+{
+ int ret;
+
+ if (regnum > 7)
+ return -EINVAL;
+
+ /* return a bogus value for (the one) register we do not have */
+ if (!((1 << regnum) & VALID_TS_RD_REG_MASK))
+ return 0;
+
+ ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
+ if (!ret) {
+ ret = ipath_tempsense_internal_read(dd, regnum);
+ mutex_unlock(&dd->ipath_eep_lock);
+ }
+
+ /*
+ * There are three possibilities here:
+ * ret is actual value (0..255)
+ * ret is -ENXIO or -EINVAL from code in this file
+ * ret is -EINTR from mutex_lock_interruptible.
+ */
+ return ret;
+}
+
+static int ipath_tempsense_internal_write(struct ipath_devdata *dd,
+ u8 regnum, u8 data)
+{
+ int ret = -ENOENT;
+ struct i2c_chain_desc *icd;
+
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
+
+ if (icd->temp_dev == IPATH_NO_DEV) {
+ /* tempsense only exists on new, real-I2C boards */
+ ret = -ENXIO;
+ goto bail;
+ }
+ if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
+ ipath_dbg("Failed tempsense startcmd\n");
+ stop_cmd(dd);
+ ret = -ENXIO;
+ goto bail;
+ }
+ ret = wr_byte(dd, regnum);
+ if (ret) {
+ stop_cmd(dd);
+ ipath_dev_err(dd, "Failed to write tempsense command %02X\n",
+ regnum);
+ ret = -ENXIO;
+ goto bail;
+ }
+ ret = wr_byte(dd, data);
+ stop_cmd(dd);
+ ret = i2c_startcmd(dd, icd->temp_dev | READ_CMD);
+ if (ret) {
+ ipath_dev_err(dd, "Failed tempsense data wrt to %02X\n",
+ regnum);
+ ret = -ENXIO;
+ }
+
+bail:
+ return ret;
+}
+
+#define VALID_TS_WR_REG_MASK ((1 << 9) | (1 << 0xB) | (1 << 0xD))
+
+/**
+ * ipath_tempsense_write - write register of temp sensor via I2C
+ * @dd: the infinipath device
+ * @regnum: register to write
+ * @data: data to write
+ *
+ * returns 0 for success or < 0 for error
+ */
+int ipath_tempsense_write(struct ipath_devdata *dd, u8 regnum, u8 data)
+{
+ int ret;
+
+ if (regnum > 15 || !((1 << regnum) & VALID_TS_WR_REG_MASK))
+ return -EINVAL;
+
+ ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
+ if (!ret) {
+ ret = ipath_tempsense_internal_write(dd, regnum, data);
+ mutex_unlock(&dd->ipath_eep_lock);
+ }
+
+ /*
+ * There are three possibilities here:
+ * ret is 0 for success
+ * ret is -ENXIO or -EINVAL from code in this file
+ * ret is -EINTR from mutex_lock_interruptible.
+ */
+ return ret;
+}
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 7e025c8..1e627aa 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -36,21 +36,28 @@
#include <linux/cdev.h>
#include <linux/swap.h>
#include <linux/vmalloc.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
#include <asm/pgtable.h>
#include "ipath_kernel.h"
#include "ipath_common.h"
+#include "ipath_user_sdma.h"
static int ipath_open(struct inode *, struct file *);
static int ipath_close(struct inode *, struct file *);
static ssize_t ipath_write(struct file *, const char __user *, size_t,
loff_t *);
+static ssize_t ipath_writev(struct kiocb *, const struct iovec *,
+ unsigned long , loff_t);
static unsigned int ipath_poll(struct file *, struct poll_table_struct *);
static int ipath_mmap(struct file *, struct vm_area_struct *);
static const struct file_operations ipath_file_ops = {
.owner = THIS_MODULE,
.write = ipath_write,
+ .aio_write = ipath_writev,
.open = ipath_open,
.release = ipath_close,
.poll = ipath_poll,
@@ -184,6 +191,29 @@
kinfo->spi_piobufbase = (u64) pd->port_piobufs +
dd->ipath_palign * kinfo->spi_piocnt * slave;
}
+
+ /*
+ * Set the PIO avail update threshold to no larger
+ * than the number of buffers per process. Note that
+ * we decrease it here, but won't ever increase it.
+ */
+ if (dd->ipath_pioupd_thresh &&
+ kinfo->spi_piocnt < dd->ipath_pioupd_thresh) {
+ unsigned long flags;
+
+ dd->ipath_pioupd_thresh = kinfo->spi_piocnt;
+ ipath_dbg("Decreased pio update threshold to %u\n",
+ dd->ipath_pioupd_thresh);
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~(INFINIPATH_S_UPDTHRESH_MASK
+ << INFINIPATH_S_UPDTHRESH_SHIFT);
+ dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
+ << INFINIPATH_S_UPDTHRESH_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
+
if (shared) {
kinfo->spi_port_uregbase = (u64) dd->ipath_uregbase +
dd->ipath_ureg_align * pd->port_port;
@@ -219,7 +249,12 @@
kinfo->spi_pioalign = dd->ipath_palign;
kinfo->spi_qpair = IPATH_KD_QP;
- kinfo->spi_piosize = dd->ipath_ibmaxlen;
+ /*
+ * user mode PIO buffers are always 2KB, even when 4KB can
+ * be received, and sent via the kernel; this is ibmaxlen
+ * for 2K MTU.
+ */
+ kinfo->spi_piosize = dd->ipath_piosize2k - 2 * sizeof(u32);
kinfo->spi_mtu = dd->ipath_ibmaxlen; /* maxlen, not ibmtu */
kinfo->spi_port = pd->port_port;
kinfo->spi_subport = subport_fp(fp);
@@ -1598,6 +1633,9 @@
port_fp(fp) = pd;
pd->port_pid = current->pid;
strncpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
+ ipath_chg_pioavailkernel(dd,
+ dd->ipath_pbufsport * (pd->port_port - 1),
+ dd->ipath_pbufsport, 0);
ipath_stats.sps_ports++;
ret = 0;
} else
@@ -1760,7 +1798,7 @@
for (ndev = 0; ndev < devmax; ndev++) {
struct ipath_devdata *dd = ipath_lookup(ndev);
- if (!dd)
+ if (!usable(dd))
continue;
for (i = 1; i < dd->ipath_cfgports; i++) {
struct ipath_portdata *pd = dd->ipath_pd[i];
@@ -1839,10 +1877,9 @@
if (ipath_compatible_subports(swmajor, swminor) &&
uinfo->spu_subport_cnt &&
(ret = find_shared_port(fp, uinfo))) {
- mutex_unlock(&ipath_mutex);
if (ret > 0)
ret = 0;
- goto done;
+ goto done_chk_sdma;
}
i_minor = iminor(fp->f_path.dentry->d_inode) - IPATH_USER_MINOR_BASE;
@@ -1854,6 +1891,21 @@
else
ret = find_best_unit(fp, uinfo);
+done_chk_sdma:
+ if (!ret) {
+ struct ipath_filedata *fd = fp->private_data;
+ const struct ipath_portdata *pd = fd->pd;
+ const struct ipath_devdata *dd = pd->port_dd;
+
+ fd->pq = ipath_user_sdma_queue_create(&dd->pcidev->dev,
+ dd->ipath_unit,
+ pd->port_port,
+ fd->subport);
+
+ if (!fd->pq)
+ ret = -ENOMEM;
+ }
+
mutex_unlock(&ipath_mutex);
done:
@@ -1922,22 +1974,25 @@
pd->port_hdrqfull_poll = pd->port_hdrqfull;
/*
- * now enable the port; the tail registers will be written to memory
- * by the chip as soon as it sees the write to
- * dd->ipath_kregs->kr_rcvctrl. The update only happens on
- * transition from 0 to 1, so clear it first, then set it as part of
- * enabling the port. This will (very briefly) affect any other
- * open ports, but it shouldn't be long enough to be an issue.
- * We explictly set the in-memory copy to 0 beforehand, so we don't
- * have to wait to be sure the DMA update has happened.
+ * Now enable the port for receive.
+ * For chips that are set to DMA the tail register to memory
+ * when they change (and when the update bit transitions from
+ * 0 to 1. So for those chips, we turn it off and then back on.
+ * This will (very briefly) affect any other open ports, but the
+ * duration is very short, and therefore isn't an issue. We
+ * explictly set the in-memory tail copy to 0 beforehand, so we
+ * don't have to wait to be sure the DMA update has happened
+ * (chip resets head/tail to 0 on transition to enable).
*/
- if (pd->port_rcvhdrtail_kvaddr)
- ipath_clear_rcvhdrtail(pd);
set_bit(dd->ipath_r_portenable_shift + pd->port_port,
&dd->ipath_rcvctrl);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ if (!(dd->ipath_flags & IPATH_NODMA_RTAIL)) {
+ if (pd->port_rcvhdrtail_kvaddr)
+ ipath_clear_rcvhdrtail(pd);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl &
~(1ULL << dd->ipath_r_tailupd_shift));
+ }
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl);
/* Notify any waiting slaves */
@@ -1965,14 +2020,15 @@
ipath_cdbg(VERBOSE, "Port %u unlocking any locked expTID pages\n",
pd->port_port);
for (i = port_tidbase; i < maxtid; i++) {
- if (!dd->ipath_pageshadow[i])
+ struct page *ps = dd->ipath_pageshadow[i];
+
+ if (!ps)
continue;
+ dd->ipath_pageshadow[i] = NULL;
pci_unmap_page(dd->pcidev, dd->ipath_physshadow[i],
PAGE_SIZE, PCI_DMA_FROMDEVICE);
- ipath_release_user_pages_on_close(&dd->ipath_pageshadow[i],
- 1);
- dd->ipath_pageshadow[i] = NULL;
+ ipath_release_user_pages_on_close(&ps, 1);
cnt++;
ipath_stats.sps_pageunlocks++;
}
@@ -2007,6 +2063,13 @@
mutex_unlock(&ipath_mutex);
goto bail;
}
+
+ dd = pd->port_dd;
+
+ /* drain user sdma queue */
+ ipath_user_sdma_queue_drain(dd, fd->pq);
+ ipath_user_sdma_queue_destroy(fd->pq);
+
if (--pd->port_cnt) {
/*
* XXX If the master closes the port before the slave(s),
@@ -2019,7 +2082,6 @@
goto bail;
}
port = pd->port_port;
- dd = pd->port_dd;
if (pd->port_hdrqfull) {
ipath_cdbg(PROC, "%s[%u] had %u rcvhdrqfull errors "
@@ -2039,7 +2101,7 @@
pd->port_rcvnowait = pd->port_pionowait = 0;
}
if (pd->port_flag) {
- ipath_dbg("port %u port_flag still set to 0x%lx\n",
+ ipath_cdbg(PROC, "port %u port_flag set: 0x%lx\n",
pd->port_port, pd->port_flag);
pd->port_flag = 0;
}
@@ -2076,6 +2138,7 @@
i = dd->ipath_pbufsport * (port - 1);
ipath_disarm_piobufs(dd, i, dd->ipath_pbufsport);
+ ipath_chg_pioavailkernel(dd, i, dd->ipath_pbufsport, 1);
dd->ipath_f_clear_tids(dd, pd->port_port);
@@ -2140,17 +2203,31 @@
return ret;
}
-static int ipath_force_pio_avail_update(struct ipath_devdata *dd)
+static int ipath_sdma_get_inflight(struct ipath_user_sdma_queue *pq,
+ u32 __user *inflightp)
{
- unsigned long flags;
+ const u32 val = ipath_user_sdma_inflight_counter(pq);
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl & ~INFINIPATH_S_PIOBUFAVAILUPD);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ if (put_user(val, inflightp))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int ipath_sdma_get_complete(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ u32 __user *completep)
+{
+ u32 val;
+ int err;
+
+ err = ipath_user_sdma_make_progress(dd, pq);
+ if (err < 0)
+ return err;
+
+ val = ipath_user_sdma_complete_counter(pq);
+ if (put_user(val, completep))
+ return -EFAULT;
return 0;
}
@@ -2229,6 +2306,16 @@
dest = &cmd.cmd.armlaunch_ctrl;
src = &ucmd->cmd.armlaunch_ctrl;
break;
+ case IPATH_CMD_SDMA_INFLIGHT:
+ copy = sizeof(cmd.cmd.sdma_inflight);
+ dest = &cmd.cmd.sdma_inflight;
+ src = &ucmd->cmd.sdma_inflight;
+ break;
+ case IPATH_CMD_SDMA_COMPLETE:
+ copy = sizeof(cmd.cmd.sdma_complete);
+ dest = &cmd.cmd.sdma_complete;
+ src = &ucmd->cmd.sdma_complete;
+ break;
default:
ret = -EINVAL;
goto bail;
@@ -2299,7 +2386,7 @@
cmd.cmd.slave_mask_addr);
break;
case IPATH_CMD_PIOAVAILUPD:
- ret = ipath_force_pio_avail_update(pd->port_dd);
+ ipath_force_pio_avail_update(pd->port_dd);
break;
case IPATH_CMD_POLL_TYPE:
pd->poll_type = cmd.cmd.poll_type;
@@ -2310,6 +2397,17 @@
else
ipath_disable_armlaunch(pd->port_dd);
break;
+ case IPATH_CMD_SDMA_INFLIGHT:
+ ret = ipath_sdma_get_inflight(user_sdma_queue_fp(fp),
+ (u32 __user *) (unsigned long)
+ cmd.cmd.sdma_inflight);
+ break;
+ case IPATH_CMD_SDMA_COMPLETE:
+ ret = ipath_sdma_get_complete(pd->port_dd,
+ user_sdma_queue_fp(fp),
+ (u32 __user *) (unsigned long)
+ cmd.cmd.sdma_complete);
+ break;
}
if (ret >= 0)
@@ -2319,6 +2417,20 @@
return ret;
}
+static ssize_t ipath_writev(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long dim, loff_t off)
+{
+ struct file *filp = iocb->ki_filp;
+ struct ipath_filedata *fp = filp->private_data;
+ struct ipath_portdata *pd = port_fp(filp);
+ struct ipath_user_sdma_queue *pq = fp->pq;
+
+ if (!dim)
+ return -EINVAL;
+
+ return ipath_user_sdma_writev(pd->port_dd, pq, iov, dim);
+}
+
static struct class *ipath_class;
static int init_cdev(int minor, char *name, const struct file_operations *fops,
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 9e2ced3..02831ad 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -40,6 +40,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/htirq.h>
+#include <rdma/ib_verbs.h>
#include "ipath_kernel.h"
#include "ipath_registers.h"
@@ -305,7 +306,9 @@
/* kr_intstatus, kr_intclear, kr_intmask bits */
#define INFINIPATH_I_RCVURG_MASK ((1U<<9)-1)
+#define INFINIPATH_I_RCVURG_SHIFT 0
#define INFINIPATH_I_RCVAVAIL_MASK ((1U<<9)-1)
+#define INFINIPATH_I_RCVAVAIL_SHIFT 12
/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
#define INFINIPATH_HWE_HTCMEMPARITYERR_SHIFT 0
@@ -476,7 +479,13 @@
#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
<< INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
-static int ipath_ht_txe_recover(struct ipath_devdata *);
+static void ipath_ht_txe_recover(struct ipath_devdata *dd)
+{
+ ++ipath_stats.sps_txeparity;
+ dev_info(&dd->pcidev->dev,
+ "Recovering from TXE PIO parity error\n");
+}
+
/**
* ipath_ht_handle_hwerrors - display hardware errors.
@@ -557,11 +566,11 @@
* occur if a processor speculative read is done to the PIO
* buffer while we are sending a packet, for example.
*/
- if ((hwerrs & TXE_PIO_PARITY) && ipath_ht_txe_recover(dd))
+ if (hwerrs & TXE_PIO_PARITY) {
+ ipath_ht_txe_recover(dd);
hwerrs &= ~TXE_PIO_PARITY;
- if (hwerrs & RXE_EAGER_PARITY)
- ipath_dev_err(dd, "RXE parity, Eager TID error is not "
- "recoverable\n");
+ }
+
if (!hwerrs) {
ipath_dbg("Clearing freezemode on ignored or "
"recovered hardware error\n");
@@ -735,11 +744,10 @@
*/
dd->ipath_flags |= IPATH_32BITCOUNTERS;
dd->ipath_flags |= IPATH_GPIO_INTR;
- if (dd->ipath_htspeed != 800)
+ if (dd->ipath_lbus_speed != 800)
ipath_dev_err(dd,
"Incorrectly configured for HT @ %uMHz\n",
- dd->ipath_htspeed);
- ret = 0;
+ dd->ipath_lbus_speed);
/*
* set here, not in ipath_init_*_funcs because we have to do
@@ -839,7 +847,7 @@
/*
* now write them back to clear the error.
*/
- pci_write_config_byte(pdev, link_off,
+ pci_write_config_word(pdev, link_off,
linkctrl & (0xf << 8));
}
}
@@ -904,7 +912,7 @@
break;
}
- dd->ipath_htwidth = width;
+ dd->ipath_lbus_width = width;
if (linkwidth != 0x11) {
ipath_dev_err(dd, "Not configured for 16 bit HT "
@@ -952,8 +960,13 @@
speed = 200;
break;
}
- dd->ipath_htspeed = speed;
+ dd->ipath_lbus_speed = speed;
}
+
+ snprintf(dd->ipath_lbus_info, sizeof(dd->ipath_lbus_info),
+ "HyperTransport,%uMHz,x%u\n",
+ dd->ipath_lbus_speed,
+ dd->ipath_lbus_width);
}
static int ipath_ht_intconfig(struct ipath_devdata *dd)
@@ -1653,22 +1666,6 @@
}
-static int ipath_ht_txe_recover(struct ipath_devdata *dd)
-{
- int cnt = ++ipath_stats.sps_txeparity;
- if (cnt >= IPATH_MAX_PARITY_ATTEMPTS) {
- if (cnt == IPATH_MAX_PARITY_ATTEMPTS)
- ipath_dev_err(dd,
- "Too many attempts to recover from "
- "TXE parity, giving up\n");
- return 0;
- }
- dev_info(&dd->pcidev->dev,
- "Recovering from TXE PIO parity error\n");
- return 1;
-}
-
-
/**
* ipath_init_ht_get_base_info - set chip-specific flags for user code
* @dd: the infinipath device
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index c7a2f50..421cc2a 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -38,7 +38,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/delay.h>
-
+#include <rdma/ib_verbs.h>
#include "ipath_kernel.h"
#include "ipath_registers.h"
@@ -311,9 +311,14 @@
.cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt)
};
+/* kr_control bits */
+#define INFINIPATH_C_RESET 1U
+
/* kr_intstatus, kr_intclear, kr_intmask bits */
#define INFINIPATH_I_RCVURG_MASK ((1U<<5)-1)
+#define INFINIPATH_I_RCVURG_SHIFT 0
#define INFINIPATH_I_RCVAVAIL_MASK ((1U<<5)-1)
+#define INFINIPATH_I_RCVAVAIL_SHIFT 12
/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
#define INFINIPATH_HWE_PCIEMEMPARITYERR_MASK 0x000000000000003fULL
@@ -338,6 +343,9 @@
#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000
#define INFINIPATH_EXTS_MEMBIST_FOUND 0x0000000000008000
+/* kr_xgxsconfig bits */
+#define INFINIPATH_XGXS_RESET 0x5ULL
+
#define _IPATH_GPIO_SDA_NUM 1
#define _IPATH_GPIO_SCL_NUM 0
@@ -346,6 +354,16 @@
#define IPATH_GPIO_SCL (1ULL << \
(_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
+#define INFINIPATH_RT_BUFSIZE_MASK 0xe0000000ULL
+#define INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid) \
+ ((((tid) & INFINIPATH_RT_BUFSIZE_MASK) >> 29) + 11 - 1)
+#define INFINIPATH_RT_BUFSIZE(tid) (1 << INFINIPATH_RT_BUFSIZE_SHIFTVAL(tid))
+#define INFINIPATH_RT_IS_VALID(tid) \
+ (((tid) & INFINIPATH_RT_BUFSIZE_MASK) && \
+ ((((tid) & INFINIPATH_RT_BUFSIZE_MASK) != INFINIPATH_RT_BUFSIZE_MASK)))
+#define INFINIPATH_RT_ADDR_MASK 0x1FFFFFFFULL /* 29 bits valid */
+#define INFINIPATH_RT_ADDR_SHIFT 10
+
#define INFINIPATH_R_INTRAVAIL_SHIFT 16
#define INFINIPATH_R_TAILUPD_SHIFT 31
@@ -372,6 +390,8 @@
#define TXE_PIO_PARITY ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF | \
INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
<< INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
+#define RXE_EAGER_PARITY (INFINIPATH_HWE_RXEMEMPARITYERR_EAGERTID \
+ << INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT)
static void ipath_pe_put_tid_2(struct ipath_devdata *, u64 __iomem *,
u32, unsigned long);
@@ -450,10 +470,8 @@
* make sure we get this much out, unless told to be quiet,
* or it's occurred within the last 5 seconds
*/
- if ((hwerrs & ~(dd->ipath_lasthwerror |
- ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
- INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
- << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) ||
+ if ((hwerrs & ~(dd->ipath_lasthwerror | TXE_PIO_PARITY |
+ RXE_EAGER_PARITY)) ||
(ipath_debug & __IPATH_VERBDBG))
dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
"(cleared)\n", (unsigned long long) hwerrs);
@@ -465,7 +483,7 @@
(hwerrs & ~dd->ipath_hwe_bitsextant));
ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
- if (ctrl & INFINIPATH_C_FREEZEMODE) {
+ if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
/*
* parity errors in send memory are recoverable,
* just cancel the send (if indicated in * sendbuffererror),
@@ -540,12 +558,40 @@
dd->ipath_hwerrmask);
}
- if (*msg)
- ipath_dev_err(dd, "%s hardware error\n", msg);
- if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg) {
+ if (hwerrs) {
/*
- * for /sys status file ; if no trailing } is copied, we'll
- * know it was truncated.
+ * if any set that we aren't ignoring; only
+ * make the complaint once, in case it's stuck
+ * or recurring, and we get here multiple
+ * times.
+ */
+ ipath_dev_err(dd, "%s hardware error\n", msg);
+ if (dd->ipath_flags & IPATH_INITTED) {
+ ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
+ ipath_setup_pe_setextled(dd,
+ INFINIPATH_IBCS_L_STATE_DOWN,
+ INFINIPATH_IBCS_LT_STATE_DISABLED);
+ ipath_dev_err(dd, "Fatal Hardware Error (freeze "
+ "mode), no longer usable, SN %.16s\n",
+ dd->ipath_serial);
+ isfatal = 1;
+ }
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ /* mark as having had error */
+ *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
+ /*
+ * mark as not usable, at a minimum until driver
+ * is reloaded, probably until reboot, since no
+ * other reset is possible.
+ */
+ dd->ipath_flags &= ~IPATH_INITTED;
+ } else
+ *msg = 0; /* recovered from all of them */
+
+ if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg && msg) {
+ /*
+ * for /sys status file ; if no trailing brace is copied,
+ * we'll know it was truncated.
*/
snprintf(dd->ipath_freezemsg, dd->ipath_freezelen,
"{%s}", msg);
@@ -610,7 +656,6 @@
dd->ipath_f_put_tid = ipath_pe_put_tid_2;
}
-
/*
* set here, not in ipath_init_*_funcs because we have to do
* it after we can read chip registers.
@@ -838,7 +883,7 @@
extctl = dd->ipath_extctrl & ~(INFINIPATH_EXTC_LED1PRIPORT_ON |
INFINIPATH_EXTC_LED2PRIPORT_ON);
- if (ltst & INFINIPATH_IBCS_LT_STATE_LINKUP)
+ if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP)
extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON;
if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON;
@@ -863,6 +908,62 @@
pci_disable_msi(dd->pcidev);
}
+static void ipath_6120_pcie_params(struct ipath_devdata *dd)
+{
+ u16 linkstat, speed;
+ int pos;
+
+ pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_EXP);
+ if (!pos) {
+ ipath_dev_err(dd, "Can't find PCI Express capability!\n");
+ goto bail;
+ }
+
+ pci_read_config_word(dd->pcidev, pos + PCI_EXP_LNKSTA,
+ &linkstat);
+ /*
+ * speed is bits 0-4, linkwidth is bits 4-8
+ * no defines for them in headers
+ */
+ speed = linkstat & 0xf;
+ linkstat >>= 4;
+ linkstat &= 0x1f;
+ dd->ipath_lbus_width = linkstat;
+
+ switch (speed) {
+ case 1:
+ dd->ipath_lbus_speed = 2500; /* Gen1, 2.5GHz */
+ break;
+ case 2:
+ dd->ipath_lbus_speed = 5000; /* Gen1, 5GHz */
+ break;
+ default: /* not defined, assume gen1 */
+ dd->ipath_lbus_speed = 2500;
+ break;
+ }
+
+ if (linkstat < 8)
+ ipath_dev_err(dd,
+ "PCIe width %u (x8 HCA), performance reduced\n",
+ linkstat);
+ else
+ ipath_cdbg(VERBOSE, "PCIe speed %u width %u (x8 HCA)\n",
+ dd->ipath_lbus_speed, linkstat);
+
+ if (speed != 1)
+ ipath_dev_err(dd,
+ "PCIe linkspeed %u is incorrect; "
+ "should be 1 (2500)!\n", speed);
+bail:
+ /* fill in string, even on errors */
+ snprintf(dd->ipath_lbus_info, sizeof(dd->ipath_lbus_info),
+ "PCIe,%uMHz,x%u\n",
+ dd->ipath_lbus_speed,
+ dd->ipath_lbus_width);
+
+ return;
+}
+
/**
* ipath_setup_pe_config - setup PCIe config related stuff
* @dd: the infinipath device
@@ -920,19 +1021,8 @@
} else
ipath_dev_err(dd, "Can't find MSI capability, "
"can't save MSI settings for reset\n");
- if ((pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_EXP))) {
- u16 linkstat;
- pci_read_config_word(dd->pcidev, pos + PCI_EXP_LNKSTA,
- &linkstat);
- linkstat >>= 4;
- linkstat &= 0x1f;
- if (linkstat != 8)
- ipath_dev_err(dd, "PCIe width %u, "
- "performance reduced\n", linkstat);
- }
- else
- ipath_dev_err(dd, "Can't find PCI Express "
- "capability!\n");
+
+ ipath_6120_pcie_params(dd);
dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
dd->ipath_link_speed_supported = IPATH_IB_SDR;
@@ -1065,10 +1155,7 @@
INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT;
- dd->ipath_eep_st_masks[2].errs_to_log =
- INFINIPATH_E_INVALIDADDR | INFINIPATH_E_RESET;
-
-
+ dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET;
dd->delay_mult = 2; /* SDR, 4X, can't change */
}
@@ -1142,6 +1229,9 @@
u64 val;
int i;
int ret;
+ u16 cmdval;
+
+ pci_read_config_word(dd->pcidev, PCI_COMMAND, &cmdval);
/* Use ERROR so it shows up in logs, etc. */
ipath_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->ipath_unit);
@@ -1169,10 +1259,14 @@
ipath_dev_err(dd, "rewrite of BAR1 failed: %d\n",
r);
/* now re-enable memory access */
+ pci_write_config_word(dd->pcidev, PCI_COMMAND, cmdval);
if ((r = pci_enable_device(dd->pcidev)))
ipath_dev_err(dd, "pci_enable_device failed after "
"reset: %d\n", r);
- /* whether it worked or not, mark as present, again */
+ /*
+ * whether it fully enabled or not, mark as present,
+ * again (but not INITTED)
+ */
dd->ipath_flags |= IPATH_PRESENT;
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
if (val == dd->ipath_revision) {
@@ -1190,6 +1284,8 @@
ret = 0; /* failed */
bail:
+ if (ret)
+ ipath_6120_pcie_params(dd);
return ret;
}
@@ -1209,16 +1305,21 @@
{
u32 __iomem *tidp32 = (u32 __iomem *)tidptr;
unsigned long flags = 0; /* keep gcc quiet */
+ int tidx;
+ spinlock_t *tidlockp;
+
+ if (!dd->ipath_kregbase)
+ return;
if (pa != dd->ipath_tidinvalid) {
if (pa & ((1U << 11) - 1)) {
dev_info(&dd->pcidev->dev, "BUG: physaddr %lx "
- "not 4KB aligned!\n", pa);
+ "not 2KB aligned!\n", pa);
return;
}
pa >>= 11;
/* paranoia check */
- if (pa & (7<<29))
+ if (pa & ~INFINIPATH_RT_ADDR_MASK)
ipath_dev_err(dd,
"BUG: Physical page address 0x%lx "
"has bits set in 31-29\n", pa);
@@ -1238,14 +1339,22 @@
* call can be done from interrupt level for the port 0 eager TIDs,
* so we have to use irqsave locks.
*/
- spin_lock_irqsave(&dd->ipath_tid_lock, flags);
+ /*
+ * Assumes tidptr always > ipath_egrtidbase
+ * if type == RCVHQ_RCV_TYPE_EAGER.
+ */
+ tidx = tidptr - dd->ipath_egrtidbase;
+
+ tidlockp = (type == RCVHQ_RCV_TYPE_EAGER && tidx < dd->ipath_rcvegrcnt)
+ ? &dd->ipath_kernel_tid_lock : &dd->ipath_user_tid_lock;
+ spin_lock_irqsave(tidlockp, flags);
ipath_write_kreg(dd, dd->ipath_kregs->kr_scratch, 0xfeeddeaf);
- if (dd->ipath_kregbase)
- writel(pa, tidp32);
+ writel(pa, tidp32);
ipath_write_kreg(dd, dd->ipath_kregs->kr_scratch, 0xdeadbeef);
mmiowb();
- spin_unlock_irqrestore(&dd->ipath_tid_lock, flags);
+ spin_unlock_irqrestore(tidlockp, flags);
}
+
/**
* ipath_pe_put_tid_2 - write a TID in chip, Revision 2 or higher
* @dd: the infinipath device
@@ -1261,6 +1370,10 @@
u32 type, unsigned long pa)
{
u32 __iomem *tidp32 = (u32 __iomem *)tidptr;
+ u32 tidx;
+
+ if (!dd->ipath_kregbase)
+ return;
if (pa != dd->ipath_tidinvalid) {
if (pa & ((1U << 11) - 1)) {
@@ -1270,7 +1383,7 @@
}
pa >>= 11;
/* paranoia check */
- if (pa & (7<<29))
+ if (pa & ~INFINIPATH_RT_ADDR_MASK)
ipath_dev_err(dd,
"BUG: Physical page address 0x%lx "
"has bits set in 31-29\n", pa);
@@ -1280,8 +1393,8 @@
else /* for now, always full 4KB page */
pa |= 2 << 29;
}
- if (dd->ipath_kregbase)
- writel(pa, tidp32);
+ tidx = tidptr - dd->ipath_egrtidbase;
+ writel(pa, tidp32);
mmiowb();
}
@@ -1379,17 +1492,13 @@
dd->ipath_egrtidbase = (u64 __iomem *)
((char __iomem *) dd->ipath_kregbase + dd->ipath_rcvegrbase);
- /*
- * To truly support a 4KB MTU (for usermode), we need to
- * bump this to a larger value. For now, we use them for
- * the kernel only.
- */
- dd->ipath_rcvegrbufsize = 2048;
+ dd->ipath_rcvegrbufsize = ipath_mtu4096 ? 4096 : 2048;
/*
* the min() check here is currently a nop, but it may not always
* be, depending on just how we do ipath_rcvegrbufsize
*/
- dd->ipath_ibmaxlen = min(dd->ipath_piosize2k,
+ dd->ipath_ibmaxlen = min(ipath_mtu4096 ? dd->ipath_piosize4k :
+ dd->ipath_piosize2k,
dd->ipath_rcvegrbufsize +
(dd->ipath_rcvhdrentsize << 2));
dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
new file mode 100644
index 0000000..1b2de2c
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
@@ -0,0 +1,2571 @@
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+/*
+ * This file contains all of the code that is specific to the
+ * InfiniPath 7220 chip (except that specific to the SerDes)
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <rdma/ib_verbs.h>
+
+#include "ipath_kernel.h"
+#include "ipath_registers.h"
+#include "ipath_7220.h"
+
+static void ipath_setup_7220_setextled(struct ipath_devdata *, u64, u64);
+
+static unsigned ipath_compat_ddr_negotiate = 1;
+
+module_param_named(compat_ddr_negotiate, ipath_compat_ddr_negotiate, uint,
+ S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(compat_ddr_negotiate,
+ "Attempt pre-IBTA 1.2 DDR speed negotiation");
+
+static unsigned ipath_sdma_fetch_arb = 1;
+module_param_named(fetch_arb, ipath_sdma_fetch_arb, uint, S_IRUGO);
+MODULE_PARM_DESC(fetch_arb, "IBA7220: change SDMA descriptor arbitration");
+
+/*
+ * This file contains almost all the chip-specific register information and
+ * access functions for the QLogic InfiniPath 7220 PCI-Express chip, with the
+ * exception of SerDes support, which in in ipath_sd7220.c.
+ *
+ * This lists the InfiniPath registers, in the actual chip layout.
+ * This structure should never be directly accessed.
+ */
+struct _infinipath_do_not_use_kernel_regs {
+ unsigned long long Revision;
+ unsigned long long Control;
+ unsigned long long PageAlign;
+ unsigned long long PortCnt;
+ unsigned long long DebugPortSelect;
+ unsigned long long DebugSigsIntSel; /* was Reserved0;*/
+ unsigned long long SendRegBase;
+ unsigned long long UserRegBase;
+ unsigned long long CounterRegBase;
+ unsigned long long Scratch;
+ unsigned long long EEPROMAddrCmd; /* was Reserved1; */
+ unsigned long long EEPROMData; /* was Reserved2; */
+ unsigned long long IntBlocked;
+ unsigned long long IntMask;
+ unsigned long long IntStatus;
+ unsigned long long IntClear;
+ unsigned long long ErrorMask;
+ unsigned long long ErrorStatus;
+ unsigned long long ErrorClear;
+ unsigned long long HwErrMask;
+ unsigned long long HwErrStatus;
+ unsigned long long HwErrClear;
+ unsigned long long HwDiagCtrl;
+ unsigned long long MDIO;
+ unsigned long long IBCStatus;
+ unsigned long long IBCCtrl;
+ unsigned long long ExtStatus;
+ unsigned long long ExtCtrl;
+ unsigned long long GPIOOut;
+ unsigned long long GPIOMask;
+ unsigned long long GPIOStatus;
+ unsigned long long GPIOClear;
+ unsigned long long RcvCtrl;
+ unsigned long long RcvBTHQP;
+ unsigned long long RcvHdrSize;
+ unsigned long long RcvHdrCnt;
+ unsigned long long RcvHdrEntSize;
+ unsigned long long RcvTIDBase;
+ unsigned long long RcvTIDCnt;
+ unsigned long long RcvEgrBase;
+ unsigned long long RcvEgrCnt;
+ unsigned long long RcvBufBase;
+ unsigned long long RcvBufSize;
+ unsigned long long RxIntMemBase;
+ unsigned long long RxIntMemSize;
+ unsigned long long RcvPartitionKey;
+ unsigned long long RcvQPMulticastPort;
+ unsigned long long RcvPktLEDCnt;
+ unsigned long long IBCDDRCtrl;
+ unsigned long long HRTBT_GUID;
+ unsigned long long IB_SDTEST_IF_TX;
+ unsigned long long IB_SDTEST_IF_RX;
+ unsigned long long IBCDDRCtrl2;
+ unsigned long long IBCDDRStatus;
+ unsigned long long JIntReload;
+ unsigned long long IBNCModeCtrl;
+ unsigned long long SendCtrl;
+ unsigned long long SendBufBase;
+ unsigned long long SendBufSize;
+ unsigned long long SendBufCnt;
+ unsigned long long SendAvailAddr;
+ unsigned long long TxIntMemBase;
+ unsigned long long TxIntMemSize;
+ unsigned long long SendDmaBase;
+ unsigned long long SendDmaLenGen;
+ unsigned long long SendDmaTail;
+ unsigned long long SendDmaHead;
+ unsigned long long SendDmaHeadAddr;
+ unsigned long long SendDmaBufMask0;
+ unsigned long long SendDmaBufMask1;
+ unsigned long long SendDmaBufMask2;
+ unsigned long long SendDmaStatus;
+ unsigned long long SendBufferError;
+ unsigned long long SendBufferErrorCONT1;
+ unsigned long long SendBufErr2; /* was Reserved6SBE[0/6] */
+ unsigned long long Reserved6L[2];
+ unsigned long long AvailUpdCount;
+ unsigned long long RcvHdrAddr0;
+ unsigned long long RcvHdrAddrs[16]; /* Why enumerate? */
+ unsigned long long Reserved7hdtl; /* Align next to 300 */
+ unsigned long long RcvHdrTailAddr0; /* 300, like others */
+ unsigned long long RcvHdrTailAddrs[16];
+ unsigned long long Reserved9SW[7]; /* was [8]; we have 17 ports */
+ unsigned long long IbsdEpbAccCtl; /* IB Serdes EPB access control */
+ unsigned long long IbsdEpbTransReg; /* IB Serdes EPB Transaction */
+ unsigned long long Reserved10sds; /* was SerdesStatus on */
+ unsigned long long XGXSConfig;
+ unsigned long long IBSerDesCtrl; /* Was IBPLLCfg on Monty */
+ unsigned long long EEPCtlStat; /* for "boot" EEPROM/FLASH */
+ unsigned long long EEPAddrCmd;
+ unsigned long long EEPData;
+ unsigned long long PcieEpbAccCtl;
+ unsigned long long PcieEpbTransCtl;
+ unsigned long long EfuseCtl; /* E-Fuse control */
+ unsigned long long EfuseData[4];
+ unsigned long long ProcMon;
+ /* this chip moves following two from previous 200, 208 */
+ unsigned long long PCIeRBufTestReg0;
+ unsigned long long PCIeRBufTestReg1;
+ /* added for this chip */
+ unsigned long long PCIeRBufTestReg2;
+ unsigned long long PCIeRBufTestReg3;
+ /* added for this chip, debug only */
+ unsigned long long SPC_JTAG_ACCESS_REG;
+ unsigned long long LAControlReg;
+ unsigned long long GPIODebugSelReg;
+ unsigned long long DebugPortValueReg;
+ /* added for this chip, DMA */
+ unsigned long long SendDmaBufUsed[3];
+ unsigned long long SendDmaReqTagUsed;
+ /*
+ * added for this chip, EFUSE: note that these program 64-bit
+ * words 2 and 3 */
+ unsigned long long efuse_pgm_data[2];
+ unsigned long long Reserved11LAalign[10]; /* Skip 4B0..4F8 */
+ /* we have 30 regs for DDS and RXEQ in IB SERDES */
+ unsigned long long SerDesDDSRXEQ[30];
+ unsigned long long Reserved12LAalign[2]; /* Skip 5F0, 5F8 */
+ /* added for LA debug support */
+ unsigned long long LAMemory[32];
+};
+
+struct _infinipath_do_not_use_counters {
+ __u64 LBIntCnt;
+ __u64 LBFlowStallCnt;
+ __u64 TxSDmaDescCnt; /* was Reserved1 */
+ __u64 TxUnsupVLErrCnt;
+ __u64 TxDataPktCnt;
+ __u64 TxFlowPktCnt;
+ __u64 TxDwordCnt;
+ __u64 TxLenErrCnt;
+ __u64 TxMaxMinLenErrCnt;
+ __u64 TxUnderrunCnt;
+ __u64 TxFlowStallCnt;
+ __u64 TxDroppedPktCnt;
+ __u64 RxDroppedPktCnt;
+ __u64 RxDataPktCnt;
+ __u64 RxFlowPktCnt;
+ __u64 RxDwordCnt;
+ __u64 RxLenErrCnt;
+ __u64 RxMaxMinLenErrCnt;
+ __u64 RxICRCErrCnt;
+ __u64 RxVCRCErrCnt;
+ __u64 RxFlowCtrlErrCnt;
+ __u64 RxBadFormatCnt;
+ __u64 RxLinkProblemCnt;
+ __u64 RxEBPCnt;
+ __u64 RxLPCRCErrCnt;
+ __u64 RxBufOvflCnt;
+ __u64 RxTIDFullErrCnt;
+ __u64 RxTIDValidErrCnt;
+ __u64 RxPKeyMismatchCnt;
+ __u64 RxP0HdrEgrOvflCnt;
+ __u64 RxP1HdrEgrOvflCnt;
+ __u64 RxP2HdrEgrOvflCnt;
+ __u64 RxP3HdrEgrOvflCnt;
+ __u64 RxP4HdrEgrOvflCnt;
+ __u64 RxP5HdrEgrOvflCnt;
+ __u64 RxP6HdrEgrOvflCnt;
+ __u64 RxP7HdrEgrOvflCnt;
+ __u64 RxP8HdrEgrOvflCnt;
+ __u64 RxP9HdrEgrOvflCnt; /* was Reserved6 */
+ __u64 RxP10HdrEgrOvflCnt; /* was Reserved7 */
+ __u64 RxP11HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 RxP12HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 RxP13HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 RxP14HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 RxP15HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 RxP16HdrEgrOvflCnt; /* new for IBA7220 */
+ __u64 IBStatusChangeCnt;
+ __u64 IBLinkErrRecoveryCnt;
+ __u64 IBLinkDownedCnt;
+ __u64 IBSymbolErrCnt;
+ /* The following are new for IBA7220 */
+ __u64 RxVL15DroppedPktCnt;
+ __u64 RxOtherLocalPhyErrCnt;
+ __u64 PcieRetryBufDiagQwordCnt;
+ __u64 ExcessBufferOvflCnt;
+ __u64 LocalLinkIntegrityErrCnt;
+ __u64 RxVlErrCnt;
+ __u64 RxDlidFltrCnt;
+ __u64 Reserved8[7];
+ __u64 PSStat;
+ __u64 PSStart;
+ __u64 PSInterval;
+ __u64 PSRcvDataCount;
+ __u64 PSRcvPktsCount;
+ __u64 PSXmitDataCount;
+ __u64 PSXmitPktsCount;
+ __u64 PSXmitWaitCount;
+};
+
+#define IPATH_KREG_OFFSET(field) (offsetof( \
+ struct _infinipath_do_not_use_kernel_regs, field) / sizeof(u64))
+#define IPATH_CREG_OFFSET(field) (offsetof( \
+ struct _infinipath_do_not_use_counters, field) / sizeof(u64))
+
+static const struct ipath_kregs ipath_7220_kregs = {
+ .kr_control = IPATH_KREG_OFFSET(Control),
+ .kr_counterregbase = IPATH_KREG_OFFSET(CounterRegBase),
+ .kr_debugportselect = IPATH_KREG_OFFSET(DebugPortSelect),
+ .kr_errorclear = IPATH_KREG_OFFSET(ErrorClear),
+ .kr_errormask = IPATH_KREG_OFFSET(ErrorMask),
+ .kr_errorstatus = IPATH_KREG_OFFSET(ErrorStatus),
+ .kr_extctrl = IPATH_KREG_OFFSET(ExtCtrl),
+ .kr_extstatus = IPATH_KREG_OFFSET(ExtStatus),
+ .kr_gpio_clear = IPATH_KREG_OFFSET(GPIOClear),
+ .kr_gpio_mask = IPATH_KREG_OFFSET(GPIOMask),
+ .kr_gpio_out = IPATH_KREG_OFFSET(GPIOOut),
+ .kr_gpio_status = IPATH_KREG_OFFSET(GPIOStatus),
+ .kr_hwdiagctrl = IPATH_KREG_OFFSET(HwDiagCtrl),
+ .kr_hwerrclear = IPATH_KREG_OFFSET(HwErrClear),
+ .kr_hwerrmask = IPATH_KREG_OFFSET(HwErrMask),
+ .kr_hwerrstatus = IPATH_KREG_OFFSET(HwErrStatus),
+ .kr_ibcctrl = IPATH_KREG_OFFSET(IBCCtrl),
+ .kr_ibcstatus = IPATH_KREG_OFFSET(IBCStatus),
+ .kr_intblocked = IPATH_KREG_OFFSET(IntBlocked),
+ .kr_intclear = IPATH_KREG_OFFSET(IntClear),
+ .kr_intmask = IPATH_KREG_OFFSET(IntMask),
+ .kr_intstatus = IPATH_KREG_OFFSET(IntStatus),
+ .kr_mdio = IPATH_KREG_OFFSET(MDIO),
+ .kr_pagealign = IPATH_KREG_OFFSET(PageAlign),
+ .kr_partitionkey = IPATH_KREG_OFFSET(RcvPartitionKey),
+ .kr_portcnt = IPATH_KREG_OFFSET(PortCnt),
+ .kr_rcvbthqp = IPATH_KREG_OFFSET(RcvBTHQP),
+ .kr_rcvbufbase = IPATH_KREG_OFFSET(RcvBufBase),
+ .kr_rcvbufsize = IPATH_KREG_OFFSET(RcvBufSize),
+ .kr_rcvctrl = IPATH_KREG_OFFSET(RcvCtrl),
+ .kr_rcvegrbase = IPATH_KREG_OFFSET(RcvEgrBase),
+ .kr_rcvegrcnt = IPATH_KREG_OFFSET(RcvEgrCnt),
+ .kr_rcvhdrcnt = IPATH_KREG_OFFSET(RcvHdrCnt),
+ .kr_rcvhdrentsize = IPATH_KREG_OFFSET(RcvHdrEntSize),
+ .kr_rcvhdrsize = IPATH_KREG_OFFSET(RcvHdrSize),
+ .kr_rcvintmembase = IPATH_KREG_OFFSET(RxIntMemBase),
+ .kr_rcvintmemsize = IPATH_KREG_OFFSET(RxIntMemSize),
+ .kr_rcvtidbase = IPATH_KREG_OFFSET(RcvTIDBase),
+ .kr_rcvtidcnt = IPATH_KREG_OFFSET(RcvTIDCnt),
+ .kr_revision = IPATH_KREG_OFFSET(Revision),
+ .kr_scratch = IPATH_KREG_OFFSET(Scratch),
+ .kr_sendbuffererror = IPATH_KREG_OFFSET(SendBufferError),
+ .kr_sendctrl = IPATH_KREG_OFFSET(SendCtrl),
+ .kr_sendpioavailaddr = IPATH_KREG_OFFSET(SendAvailAddr),
+ .kr_sendpiobufbase = IPATH_KREG_OFFSET(SendBufBase),
+ .kr_sendpiobufcnt = IPATH_KREG_OFFSET(SendBufCnt),
+ .kr_sendpiosize = IPATH_KREG_OFFSET(SendBufSize),
+ .kr_sendregbase = IPATH_KREG_OFFSET(SendRegBase),
+ .kr_txintmembase = IPATH_KREG_OFFSET(TxIntMemBase),
+ .kr_txintmemsize = IPATH_KREG_OFFSET(TxIntMemSize),
+ .kr_userregbase = IPATH_KREG_OFFSET(UserRegBase),
+
+ .kr_xgxsconfig = IPATH_KREG_OFFSET(XGXSConfig),
+
+ /* send dma related regs */
+ .kr_senddmabase = IPATH_KREG_OFFSET(SendDmaBase),
+ .kr_senddmalengen = IPATH_KREG_OFFSET(SendDmaLenGen),
+ .kr_senddmatail = IPATH_KREG_OFFSET(SendDmaTail),
+ .kr_senddmahead = IPATH_KREG_OFFSET(SendDmaHead),
+ .kr_senddmaheadaddr = IPATH_KREG_OFFSET(SendDmaHeadAddr),
+ .kr_senddmabufmask0 = IPATH_KREG_OFFSET(SendDmaBufMask0),
+ .kr_senddmabufmask1 = IPATH_KREG_OFFSET(SendDmaBufMask1),
+ .kr_senddmabufmask2 = IPATH_KREG_OFFSET(SendDmaBufMask2),
+ .kr_senddmastatus = IPATH_KREG_OFFSET(SendDmaStatus),
+
+ /* SerDes related regs */
+ .kr_ibserdesctrl = IPATH_KREG_OFFSET(IBSerDesCtrl),
+ .kr_ib_epbacc = IPATH_KREG_OFFSET(IbsdEpbAccCtl),
+ .kr_ib_epbtrans = IPATH_KREG_OFFSET(IbsdEpbTransReg),
+ .kr_pcie_epbacc = IPATH_KREG_OFFSET(PcieEpbAccCtl),
+ .kr_pcie_epbtrans = IPATH_KREG_OFFSET(PcieEpbTransCtl),
+ .kr_ib_ddsrxeq = IPATH_KREG_OFFSET(SerDesDDSRXEQ),
+
+ /*
+ * These should not be used directly via ipath_read_kreg64(),
+ * use them with ipath_read_kreg64_port()
+ */
+ .kr_rcvhdraddr = IPATH_KREG_OFFSET(RcvHdrAddr0),
+ .kr_rcvhdrtailaddr = IPATH_KREG_OFFSET(RcvHdrTailAddr0),
+
+ /*
+ * The rcvpktled register controls one of the debug port signals, so
+ * a packet activity LED can be connected to it.
+ */
+ .kr_rcvpktledcnt = IPATH_KREG_OFFSET(RcvPktLEDCnt),
+ .kr_pcierbuftestreg0 = IPATH_KREG_OFFSET(PCIeRBufTestReg0),
+ .kr_pcierbuftestreg1 = IPATH_KREG_OFFSET(PCIeRBufTestReg1),
+
+ .kr_hrtbt_guid = IPATH_KREG_OFFSET(HRTBT_GUID),
+ .kr_ibcddrctrl = IPATH_KREG_OFFSET(IBCDDRCtrl),
+ .kr_ibcddrstatus = IPATH_KREG_OFFSET(IBCDDRStatus),
+ .kr_jintreload = IPATH_KREG_OFFSET(JIntReload)
+};
+
+static const struct ipath_cregs ipath_7220_cregs = {
+ .cr_badformatcnt = IPATH_CREG_OFFSET(RxBadFormatCnt),
+ .cr_erricrccnt = IPATH_CREG_OFFSET(RxICRCErrCnt),
+ .cr_errlinkcnt = IPATH_CREG_OFFSET(RxLinkProblemCnt),
+ .cr_errlpcrccnt = IPATH_CREG_OFFSET(RxLPCRCErrCnt),
+ .cr_errpkey = IPATH_CREG_OFFSET(RxPKeyMismatchCnt),
+ .cr_errrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowCtrlErrCnt),
+ .cr_err_rlencnt = IPATH_CREG_OFFSET(RxLenErrCnt),
+ .cr_errslencnt = IPATH_CREG_OFFSET(TxLenErrCnt),
+ .cr_errtidfull = IPATH_CREG_OFFSET(RxTIDFullErrCnt),
+ .cr_errtidvalid = IPATH_CREG_OFFSET(RxTIDValidErrCnt),
+ .cr_errvcrccnt = IPATH_CREG_OFFSET(RxVCRCErrCnt),
+ .cr_ibstatuschange = IPATH_CREG_OFFSET(IBStatusChangeCnt),
+ .cr_intcnt = IPATH_CREG_OFFSET(LBIntCnt),
+ .cr_invalidrlencnt = IPATH_CREG_OFFSET(RxMaxMinLenErrCnt),
+ .cr_invalidslencnt = IPATH_CREG_OFFSET(TxMaxMinLenErrCnt),
+ .cr_lbflowstallcnt = IPATH_CREG_OFFSET(LBFlowStallCnt),
+ .cr_pktrcvcnt = IPATH_CREG_OFFSET(RxDataPktCnt),
+ .cr_pktrcvflowctrlcnt = IPATH_CREG_OFFSET(RxFlowPktCnt),
+ .cr_pktsendcnt = IPATH_CREG_OFFSET(TxDataPktCnt),
+ .cr_pktsendflowcnt = IPATH_CREG_OFFSET(TxFlowPktCnt),
+ .cr_portovflcnt = IPATH_CREG_OFFSET(RxP0HdrEgrOvflCnt),
+ .cr_rcvebpcnt = IPATH_CREG_OFFSET(RxEBPCnt),
+ .cr_rcvovflcnt = IPATH_CREG_OFFSET(RxBufOvflCnt),
+ .cr_senddropped = IPATH_CREG_OFFSET(TxDroppedPktCnt),
+ .cr_sendstallcnt = IPATH_CREG_OFFSET(TxFlowStallCnt),
+ .cr_sendunderruncnt = IPATH_CREG_OFFSET(TxUnderrunCnt),
+ .cr_wordrcvcnt = IPATH_CREG_OFFSET(RxDwordCnt),
+ .cr_wordsendcnt = IPATH_CREG_OFFSET(TxDwordCnt),
+ .cr_unsupvlcnt = IPATH_CREG_OFFSET(TxUnsupVLErrCnt),
+ .cr_rxdroppktcnt = IPATH_CREG_OFFSET(RxDroppedPktCnt),
+ .cr_iblinkerrrecovcnt = IPATH_CREG_OFFSET(IBLinkErrRecoveryCnt),
+ .cr_iblinkdowncnt = IPATH_CREG_OFFSET(IBLinkDownedCnt),
+ .cr_ibsymbolerrcnt = IPATH_CREG_OFFSET(IBSymbolErrCnt),
+ .cr_vl15droppedpktcnt = IPATH_CREG_OFFSET(RxVL15DroppedPktCnt),
+ .cr_rxotherlocalphyerrcnt =
+ IPATH_CREG_OFFSET(RxOtherLocalPhyErrCnt),
+ .cr_excessbufferovflcnt = IPATH_CREG_OFFSET(ExcessBufferOvflCnt),
+ .cr_locallinkintegrityerrcnt =
+ IPATH_CREG_OFFSET(LocalLinkIntegrityErrCnt),
+ .cr_rxvlerrcnt = IPATH_CREG_OFFSET(RxVlErrCnt),
+ .cr_rxdlidfltrcnt = IPATH_CREG_OFFSET(RxDlidFltrCnt),
+ .cr_psstat = IPATH_CREG_OFFSET(PSStat),
+ .cr_psstart = IPATH_CREG_OFFSET(PSStart),
+ .cr_psinterval = IPATH_CREG_OFFSET(PSInterval),
+ .cr_psrcvdatacount = IPATH_CREG_OFFSET(PSRcvDataCount),
+ .cr_psrcvpktscount = IPATH_CREG_OFFSET(PSRcvPktsCount),
+ .cr_psxmitdatacount = IPATH_CREG_OFFSET(PSXmitDataCount),
+ .cr_psxmitpktscount = IPATH_CREG_OFFSET(PSXmitPktsCount),
+ .cr_psxmitwaitcount = IPATH_CREG_OFFSET(PSXmitWaitCount),
+};
+
+/* kr_control bits */
+#define INFINIPATH_C_RESET (1U<<7)
+
+/* kr_intstatus, kr_intclear, kr_intmask bits */
+#define INFINIPATH_I_RCVURG_MASK ((1ULL<<17)-1)
+#define INFINIPATH_I_RCVURG_SHIFT 32
+#define INFINIPATH_I_RCVAVAIL_MASK ((1ULL<<17)-1)
+#define INFINIPATH_I_RCVAVAIL_SHIFT 0
+#define INFINIPATH_I_SERDESTRIMDONE (1ULL<<27)
+
+/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
+#define INFINIPATH_HWE_PCIEMEMPARITYERR_MASK 0x00000000000000ffULL
+#define INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT 0
+#define INFINIPATH_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL
+#define INFINIPATH_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL
+#define INFINIPATH_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL
+#define INFINIPATH_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL
+#define INFINIPATH_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL
+#define INFINIPATH_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
+#define INFINIPATH_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
+#define INFINIPATH_HWE_PCIE1PLLFAILED 0x0400000000000000ULL
+#define INFINIPATH_HWE_PCIE0PLLFAILED 0x0800000000000000ULL
+#define INFINIPATH_HWE_SERDESPLLFAILED 0x1000000000000000ULL
+/* specific to this chip */
+#define INFINIPATH_HWE_PCIECPLDATAQUEUEERR 0x0000000000000040ULL
+#define INFINIPATH_HWE_PCIECPLHDRQUEUEERR 0x0000000000000080ULL
+#define INFINIPATH_HWE_SDMAMEMREADERR 0x0000000010000000ULL
+#define INFINIPATH_HWE_CLK_UC_PLLNOTLOCKED 0x2000000000000000ULL
+#define INFINIPATH_HWE_PCIESERDESQ0PCLKNOTDETECT 0x0100000000000000ULL
+#define INFINIPATH_HWE_PCIESERDESQ1PCLKNOTDETECT 0x0200000000000000ULL
+#define INFINIPATH_HWE_PCIESERDESQ2PCLKNOTDETECT 0x0400000000000000ULL
+#define INFINIPATH_HWE_PCIESERDESQ3PCLKNOTDETECT 0x0800000000000000ULL
+#define INFINIPATH_HWE_DDSRXEQMEMORYPARITYERR 0x0000008000000000ULL
+#define INFINIPATH_HWE_IB_UC_MEMORYPARITYERR 0x0000004000000000ULL
+#define INFINIPATH_HWE_PCIE_UC_OCT0MEMORYPARITYERR 0x0000001000000000ULL
+#define INFINIPATH_HWE_PCIE_UC_OCT1MEMORYPARITYERR 0x0000002000000000ULL
+
+#define IBA7220_IBCS_LINKTRAININGSTATE_MASK 0x1F
+#define IBA7220_IBCS_LINKSTATE_SHIFT 5
+#define IBA7220_IBCS_LINKSPEED_SHIFT 8
+#define IBA7220_IBCS_LINKWIDTH_SHIFT 9
+
+#define IBA7220_IBCC_LINKINITCMD_MASK 0x7ULL
+#define IBA7220_IBCC_LINKCMD_SHIFT 19
+#define IBA7220_IBCC_MAXPKTLEN_SHIFT 21
+
+/* kr_ibcddrctrl bits */
+#define IBA7220_IBC_DLIDLMC_MASK 0xFFFFFFFFUL
+#define IBA7220_IBC_DLIDLMC_SHIFT 32
+#define IBA7220_IBC_HRTBT_MASK 3
+#define IBA7220_IBC_HRTBT_SHIFT 16
+#define IBA7220_IBC_HRTBT_ENB 0x10000UL
+#define IBA7220_IBC_LANE_REV_SUPPORTED (1<<8)
+#define IBA7220_IBC_LREV_MASK 1
+#define IBA7220_IBC_LREV_SHIFT 8
+#define IBA7220_IBC_RXPOL_MASK 1
+#define IBA7220_IBC_RXPOL_SHIFT 7
+#define IBA7220_IBC_WIDTH_SHIFT 5
+#define IBA7220_IBC_WIDTH_MASK 0x3
+#define IBA7220_IBC_WIDTH_1X_ONLY (0<<IBA7220_IBC_WIDTH_SHIFT)
+#define IBA7220_IBC_WIDTH_4X_ONLY (1<<IBA7220_IBC_WIDTH_SHIFT)
+#define IBA7220_IBC_WIDTH_AUTONEG (2<<IBA7220_IBC_WIDTH_SHIFT)
+#define IBA7220_IBC_SPEED_AUTONEG (1<<1)
+#define IBA7220_IBC_SPEED_SDR (1<<2)
+#define IBA7220_IBC_SPEED_DDR (1<<3)
+#define IBA7220_IBC_SPEED_AUTONEG_MASK (0x7<<1)
+#define IBA7220_IBC_IBTA_1_2_MASK (1)
+
+/* kr_ibcddrstatus */
+/* link latency shift is 0, don't bother defining */
+#define IBA7220_DDRSTAT_LINKLAT_MASK 0x3ffffff
+
+/* kr_extstatus bits */
+#define INFINIPATH_EXTS_FREQSEL 0x2
+#define INFINIPATH_EXTS_SERDESSEL 0x4
+#define INFINIPATH_EXTS_MEMBIST_ENDTEST 0x0000000000004000
+#define INFINIPATH_EXTS_MEMBIST_DISABLED 0x0000000000008000
+
+/* kr_xgxsconfig bits */
+#define INFINIPATH_XGXS_RESET 0x5ULL
+#define INFINIPATH_XGXS_FC_SAFE (1ULL<<63)
+
+/* kr_rcvpktledcnt */
+#define IBA7220_LEDBLINK_ON_SHIFT 32 /* 4ns period on after packet */
+#define IBA7220_LEDBLINK_OFF_SHIFT 0 /* 4ns period off before next on */
+
+#define _IPATH_GPIO_SDA_NUM 1
+#define _IPATH_GPIO_SCL_NUM 0
+
+#define IPATH_GPIO_SDA (1ULL << \
+ (_IPATH_GPIO_SDA_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
+#define IPATH_GPIO_SCL (1ULL << \
+ (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
+
+#define IBA7220_R_INTRAVAIL_SHIFT 17
+#define IBA7220_R_TAILUPD_SHIFT 35
+#define IBA7220_R_PORTCFG_SHIFT 36
+
+#define INFINIPATH_JINT_PACKETSHIFT 16
+#define INFINIPATH_JINT_DEFAULT_IDLE_TICKS 0
+#define INFINIPATH_JINT_DEFAULT_MAX_PACKETS 0
+
+#define IBA7220_HDRHEAD_PKTINT_SHIFT 32 /* interrupt cnt in upper 32 bits */
+
+/*
+ * the size bits give us 2^N, in KB units. 0 marks as invalid,
+ * and 7 is reserved. We currently use only 2KB and 4KB
+ */
+#define IBA7220_TID_SZ_SHIFT 37 /* shift to 3bit size selector */
+#define IBA7220_TID_SZ_2K (1UL<<IBA7220_TID_SZ_SHIFT) /* 2KB */
+#define IBA7220_TID_SZ_4K (2UL<<IBA7220_TID_SZ_SHIFT) /* 4KB */
+#define IBA7220_TID_PA_SHIFT 11U /* TID addr in chip stored w/o low bits */
+
+#define IPATH_AUTONEG_TRIES 5 /* sequential retries to negotiate DDR */
+
+static char int_type[16] = "auto";
+module_param_string(interrupt_type, int_type, sizeof(int_type), 0444);
+MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx\n");
+
+/* packet rate matching delay; chip has support */
+static u8 rate_to_delay[2][2] = {
+ /* 1x, 4x */
+ { 8, 2 }, /* SDR */
+ { 4, 1 } /* DDR */
+};
+
+/* 7220 specific hardware errors... */
+static const struct ipath_hwerror_msgs ipath_7220_hwerror_msgs[] = {
+ INFINIPATH_HWE_MSG(PCIEPOISONEDTLP, "PCIe Poisoned TLP"),
+ INFINIPATH_HWE_MSG(PCIECPLTIMEOUT, "PCIe completion timeout"),
+ /*
+ * In practice, it's unlikely wthat we'll see PCIe PLL, or bus
+ * parity or memory parity error failures, because most likely we
+ * won't be able to talk to the core of the chip. Nonetheless, we
+ * might see them, if they are in parts of the PCIe core that aren't
+ * essential.
+ */
+ INFINIPATH_HWE_MSG(PCIE1PLLFAILED, "PCIePLL1"),
+ INFINIPATH_HWE_MSG(PCIE0PLLFAILED, "PCIePLL0"),
+ INFINIPATH_HWE_MSG(PCIEBUSPARITYXTLH, "PCIe XTLH core parity"),
+ INFINIPATH_HWE_MSG(PCIEBUSPARITYXADM, "PCIe ADM TX core parity"),
+ INFINIPATH_HWE_MSG(PCIEBUSPARITYRADM, "PCIe ADM RX core parity"),
+ INFINIPATH_HWE_MSG(RXDSYNCMEMPARITYERR, "Rx Dsync"),
+ INFINIPATH_HWE_MSG(SERDESPLLFAILED, "SerDes PLL"),
+ INFINIPATH_HWE_MSG(PCIECPLDATAQUEUEERR, "PCIe cpl header queue"),
+ INFINIPATH_HWE_MSG(PCIECPLHDRQUEUEERR, "PCIe cpl data queue"),
+ INFINIPATH_HWE_MSG(SDMAMEMREADERR, "Send DMA memory read"),
+ INFINIPATH_HWE_MSG(CLK_UC_PLLNOTLOCKED, "uC PLL clock not locked"),
+ INFINIPATH_HWE_MSG(PCIESERDESQ0PCLKNOTDETECT,
+ "PCIe serdes Q0 no clock"),
+ INFINIPATH_HWE_MSG(PCIESERDESQ1PCLKNOTDETECT,
+ "PCIe serdes Q1 no clock"),
+ INFINIPATH_HWE_MSG(PCIESERDESQ2PCLKNOTDETECT,
+ "PCIe serdes Q2 no clock"),
+ INFINIPATH_HWE_MSG(PCIESERDESQ3PCLKNOTDETECT,
+ "PCIe serdes Q3 no clock"),
+ INFINIPATH_HWE_MSG(DDSRXEQMEMORYPARITYERR,
+ "DDS RXEQ memory parity"),
+ INFINIPATH_HWE_MSG(IB_UC_MEMORYPARITYERR, "IB uC memory parity"),
+ INFINIPATH_HWE_MSG(PCIE_UC_OCT0MEMORYPARITYERR,
+ "PCIe uC oct0 memory parity"),
+ INFINIPATH_HWE_MSG(PCIE_UC_OCT1MEMORYPARITYERR,
+ "PCIe uC oct1 memory parity"),
+};
+
+static void autoneg_work(struct work_struct *);
+
+/*
+ * the offset is different for different configured port numbers, since
+ * port0 is fixed in size, but others can vary. Make it a function to
+ * make the issue more obvious.
+*/
+static inline u32 port_egrtid_idx(struct ipath_devdata *dd, unsigned port)
+{
+ return port ? dd->ipath_p0_rcvegrcnt +
+ (port-1) * dd->ipath_rcvegrcnt : 0;
+}
+
+static void ipath_7220_txe_recover(struct ipath_devdata *dd)
+{
+ ++ipath_stats.sps_txeparity;
+
+ dev_info(&dd->pcidev->dev,
+ "Recovering from TXE PIO parity error\n");
+ ipath_disarm_senderrbufs(dd, 1);
+}
+
+
+/**
+ * ipath_7220_handle_hwerrors - display hardware errors.
+ * @dd: the infinipath device
+ * @msg: the output buffer
+ * @msgl: the size of the output buffer
+ *
+ * Use same msg buffer as regular errors to avoid excessive stack
+ * use. Most hardware errors are catastrophic, but for right now,
+ * we'll print them and continue. We reuse the same message buffer as
+ * ipath_handle_errors() to avoid excessive stack usage.
+ */
+static void ipath_7220_handle_hwerrors(struct ipath_devdata *dd, char *msg,
+ size_t msgl)
+{
+ ipath_err_t hwerrs;
+ u32 bits, ctrl;
+ int isfatal = 0;
+ char bitsmsg[64];
+ int log_idx;
+
+ hwerrs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
+ if (!hwerrs) {
+ /*
+ * better than printing cofusing messages
+ * This seems to be related to clearing the crc error, or
+ * the pll error during init.
+ */
+ ipath_cdbg(VERBOSE, "Called but no hardware errors set\n");
+ goto bail;
+ } else if (hwerrs == ~0ULL) {
+ ipath_dev_err(dd, "Read of hardware error status failed "
+ "(all bits set); ignoring\n");
+ goto bail;
+ }
+ ipath_stats.sps_hwerrs++;
+
+ /*
+ * Always clear the error status register, except MEMBISTFAIL,
+ * regardless of whether we continue or stop using the chip.
+ * We want that set so we know it failed, even across driver reload.
+ * We'll still ignore it in the hwerrmask. We do this partly for
+ * diagnostics, but also for support.
+ */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
+ hwerrs&~INFINIPATH_HWE_MEMBISTFAILED);
+
+ hwerrs &= dd->ipath_hwerrmask;
+
+ /* We log some errors to EEPROM, check if we have any of those. */
+ for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx)
+ if (hwerrs & dd->ipath_eep_st_masks[log_idx].hwerrs_to_log)
+ ipath_inc_eeprom_err(dd, log_idx, 1);
+ /*
+ * Make sure we get this much out, unless told to be quiet,
+ * or it's occurred within the last 5 seconds.
+ */
+ if ((hwerrs & ~(dd->ipath_lasthwerror |
+ ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT))) ||
+ (ipath_debug & __IPATH_VERBDBG))
+ dev_info(&dd->pcidev->dev, "Hardware error: hwerr=0x%llx "
+ "(cleared)\n", (unsigned long long) hwerrs);
+ dd->ipath_lasthwerror |= hwerrs;
+
+ if (hwerrs & ~dd->ipath_hwe_bitsextant)
+ ipath_dev_err(dd, "hwerror interrupt with unknown errors "
+ "%llx set\n", (unsigned long long)
+ (hwerrs & ~dd->ipath_hwe_bitsextant));
+
+ if (hwerrs & INFINIPATH_HWE_IB_UC_MEMORYPARITYERR)
+ ipath_sd7220_clr_ibpar(dd);
+
+ ctrl = ipath_read_kreg32(dd, dd->ipath_kregs->kr_control);
+ if ((ctrl & INFINIPATH_C_FREEZEMODE) && !ipath_diag_inuse) {
+ /*
+ * Parity errors in send memory are recoverable,
+ * just cancel the send (if indicated in * sendbuffererror),
+ * count the occurrence, unfreeze (if no other handled
+ * hardware error bits are set), and continue.
+ */
+ if (hwerrs & ((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)) {
+ ipath_7220_txe_recover(dd);
+ hwerrs &= ~((INFINIPATH_HWE_TXEMEMPARITYERR_PIOBUF |
+ INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC)
+ << INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT);
+ if (!hwerrs) {
+ /* else leave in freeze mode */
+ ipath_write_kreg(dd,
+ dd->ipath_kregs->kr_control,
+ dd->ipath_control);
+ goto bail;
+ }
+ }
+ if (hwerrs) {
+ /*
+ * If any set that we aren't ignoring only make the
+ * complaint once, in case it's stuck or recurring,
+ * and we get here multiple times
+ * Force link down, so switch knows, and
+ * LEDs are turned off.
+ */
+ if (dd->ipath_flags & IPATH_INITTED) {
+ ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
+ ipath_setup_7220_setextled(dd,
+ INFINIPATH_IBCS_L_STATE_DOWN,
+ INFINIPATH_IBCS_LT_STATE_DISABLED);
+ ipath_dev_err(dd, "Fatal Hardware Error "
+ "(freeze mode), no longer"
+ " usable, SN %.16s\n",
+ dd->ipath_serial);
+ isfatal = 1;
+ }
+ /*
+ * Mark as having had an error for driver, and also
+ * for /sys and status word mapped to user programs.
+ * This marks unit as not usable, until reset.
+ */
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
+ dd->ipath_flags &= ~IPATH_INITTED;
+ } else {
+ ipath_dbg("Clearing freezemode on ignored hardware "
+ "error\n");
+ ipath_clear_freeze(dd);
+ }
+ }
+
+ *msg = '\0';
+
+ if (hwerrs & INFINIPATH_HWE_MEMBISTFAILED) {
+ strlcat(msg, "[Memory BIST test failed, "
+ "InfiniPath hardware unusable]", msgl);
+ /* ignore from now on, so disable until driver reloaded */
+ *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
+ dd->ipath_hwerrmask &= ~INFINIPATH_HWE_MEMBISTFAILED;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask);
+ }
+
+ ipath_format_hwerrors(hwerrs,
+ ipath_7220_hwerror_msgs,
+ ARRAY_SIZE(ipath_7220_hwerror_msgs),
+ msg, msgl);
+
+ if (hwerrs & (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK
+ << INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT)) {
+ bits = (u32) ((hwerrs >>
+ INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) &
+ INFINIPATH_HWE_PCIEMEMPARITYERR_MASK);
+ snprintf(bitsmsg, sizeof bitsmsg,
+ "[PCIe Mem Parity Errs %x] ", bits);
+ strlcat(msg, bitsmsg, msgl);
+ }
+
+#define _IPATH_PLL_FAIL (INFINIPATH_HWE_COREPLL_FBSLIP | \
+ INFINIPATH_HWE_COREPLL_RFSLIP)
+
+ if (hwerrs & _IPATH_PLL_FAIL) {
+ snprintf(bitsmsg, sizeof bitsmsg,
+ "[PLL failed (%llx), InfiniPath hardware unusable]",
+ (unsigned long long) hwerrs & _IPATH_PLL_FAIL);
+ strlcat(msg, bitsmsg, msgl);
+ /* ignore from now on, so disable until driver reloaded */
+ dd->ipath_hwerrmask &= ~(hwerrs & _IPATH_PLL_FAIL);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask);
+ }
+
+ if (hwerrs & INFINIPATH_HWE_SERDESPLLFAILED) {
+ /*
+ * If it occurs, it is left masked since the eternal
+ * interface is unused.
+ */
+ dd->ipath_hwerrmask &= ~INFINIPATH_HWE_SERDESPLLFAILED;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask);
+ }
+
+ ipath_dev_err(dd, "%s hardware error\n", msg);
+ /*
+ * For /sys status file. if no trailing } is copied, we'll
+ * know it was truncated.
+ */
+ if (isfatal && !ipath_diag_inuse && dd->ipath_freezemsg)
+ snprintf(dd->ipath_freezemsg, dd->ipath_freezelen,
+ "{%s}", msg);
+bail:;
+}
+
+/**
+ * ipath_7220_boardname - fill in the board name
+ * @dd: the infinipath device
+ * @name: the output buffer
+ * @namelen: the size of the output buffer
+ *
+ * info is based on the board revision register
+ */
+static int ipath_7220_boardname(struct ipath_devdata *dd, char *name,
+ size_t namelen)
+{
+ char *n = NULL;
+ u8 boardrev = dd->ipath_boardrev;
+ int ret;
+
+ if (boardrev == 15) {
+ /*
+ * Emulator sometimes comes up all-ones, rather than zero.
+ */
+ boardrev = 0;
+ dd->ipath_boardrev = boardrev;
+ }
+ switch (boardrev) {
+ case 0:
+ n = "InfiniPath_7220_Emulation";
+ break;
+ case 1:
+ n = "InfiniPath_QLE7240";
+ break;
+ case 2:
+ n = "InfiniPath_QLE7280";
+ break;
+ case 3:
+ n = "InfiniPath_QLE7242";
+ break;
+ case 4:
+ n = "InfiniPath_QEM7240";
+ break;
+ case 5:
+ n = "InfiniPath_QMI7240";
+ break;
+ case 6:
+ n = "InfiniPath_QMI7264";
+ break;
+ case 7:
+ n = "InfiniPath_QMH7240";
+ break;
+ case 8:
+ n = "InfiniPath_QME7240";
+ break;
+ case 9:
+ n = "InfiniPath_QLE7250";
+ break;
+ case 10:
+ n = "InfiniPath_QLE7290";
+ break;
+ case 11:
+ n = "InfiniPath_QEM7250";
+ break;
+ case 12:
+ n = "InfiniPath_QLE-Bringup";
+ break;
+ default:
+ ipath_dev_err(dd,
+ "Don't yet know about board with ID %u\n",
+ boardrev);
+ snprintf(name, namelen, "Unknown_InfiniPath_PCIe_%u",
+ boardrev);
+ break;
+ }
+ if (n)
+ snprintf(name, namelen, "%s", n);
+
+ if (dd->ipath_majrev != 5 || !dd->ipath_minrev ||
+ dd->ipath_minrev > 2) {
+ ipath_dev_err(dd, "Unsupported InfiniPath hardware "
+ "revision %u.%u!\n",
+ dd->ipath_majrev, dd->ipath_minrev);
+ ret = 1;
+ } else if (dd->ipath_minrev == 1) {
+ /* Rev1 chips are prototype. Complain, but allow use */
+ ipath_dev_err(dd, "Unsupported hardware "
+ "revision %u.%u, Contact support@qlogic.com\n",
+ dd->ipath_majrev, dd->ipath_minrev);
+ ret = 0;
+ } else
+ ret = 0;
+
+ /*
+ * Set here not in ipath_init_*_funcs because we have to do
+ * it after we can read chip registers.
+ */
+ dd->ipath_ureg_align = 0x10000; /* 64KB alignment */
+
+ return ret;
+}
+
+/**
+ * ipath_7220_init_hwerrors - enable hardware errors
+ * @dd: the infinipath device
+ *
+ * now that we have finished initializing everything that might reasonably
+ * cause a hardware error, and cleared those errors bits as they occur,
+ * we can enable hardware errors in the mask (potentially enabling
+ * freeze mode), and enable hardware errors as errors (along with
+ * everything else) in errormask
+ */
+static void ipath_7220_init_hwerrors(struct ipath_devdata *dd)
+{
+ ipath_err_t val;
+ u64 extsval;
+
+ extsval = ipath_read_kreg64(dd, dd->ipath_kregs->kr_extstatus);
+
+ if (!(extsval & (INFINIPATH_EXTS_MEMBIST_ENDTEST |
+ INFINIPATH_EXTS_MEMBIST_DISABLED)))
+ ipath_dev_err(dd, "MemBIST did not complete!\n");
+ if (extsval & INFINIPATH_EXTS_MEMBIST_DISABLED)
+ dev_info(&dd->pcidev->dev, "MemBIST is disabled.\n");
+
+ val = ~0ULL; /* barring bugs, all hwerrors become interrupts, */
+
+ if (!dd->ipath_boardrev) /* no PLL for Emulator */
+ val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
+
+ if (dd->ipath_minrev == 1)
+ val &= ~(1ULL << 42); /* TXE LaunchFIFO Parity rev1 issue */
+
+ val &= ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR;
+ dd->ipath_hwerrmask = val;
+
+ /*
+ * special trigger "error" is for debugging purposes. It
+ * works around a processor/chipset problem. The error
+ * interrupt allows us to count occurrences, but we don't
+ * want to pay the overhead for normal use. Emulation only
+ */
+ if (!dd->ipath_boardrev)
+ dd->ipath_maskederrs = INFINIPATH_E_SENDSPECIALTRIGGER;
+}
+
+/*
+ * All detailed interaction with the SerDes has been moved to ipath_sd7220.c
+ *
+ * The portion of IBA7220-specific bringup_serdes() that actually deals with
+ * registers and memory within the SerDes itself is ipath_sd7220_init().
+ */
+
+/**
+ * ipath_7220_bringup_serdes - bring up the serdes
+ * @dd: the infinipath device
+ */
+static int ipath_7220_bringup_serdes(struct ipath_devdata *dd)
+{
+ int ret = 0;
+ u64 val, prev_val, guid;
+ int was_reset; /* Note whether uC was reset */
+
+ ipath_dbg("Trying to bringup serdes\n");
+
+ if (ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus) &
+ INFINIPATH_HWE_SERDESPLLFAILED) {
+ ipath_dbg("At start, serdes PLL failed bit set "
+ "in hwerrstatus, clearing and continuing\n");
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
+ INFINIPATH_HWE_SERDESPLLFAILED);
+ }
+
+ if (!dd->ipath_ibcddrctrl) {
+ /* not on re-init after reset */
+ dd->ipath_ibcddrctrl =
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcddrctrl);
+
+ if (dd->ipath_link_speed_enabled ==
+ (IPATH_IB_SDR | IPATH_IB_DDR))
+ dd->ipath_ibcddrctrl |=
+ IBA7220_IBC_SPEED_AUTONEG_MASK |
+ IBA7220_IBC_IBTA_1_2_MASK;
+ else
+ dd->ipath_ibcddrctrl |=
+ dd->ipath_link_speed_enabled == IPATH_IB_DDR
+ ? IBA7220_IBC_SPEED_DDR :
+ IBA7220_IBC_SPEED_SDR;
+ if ((dd->ipath_link_width_enabled & (IB_WIDTH_1X |
+ IB_WIDTH_4X)) == (IB_WIDTH_1X | IB_WIDTH_4X))
+ dd->ipath_ibcddrctrl |= IBA7220_IBC_WIDTH_AUTONEG;
+ else
+ dd->ipath_ibcddrctrl |=
+ dd->ipath_link_width_enabled == IB_WIDTH_4X
+ ? IBA7220_IBC_WIDTH_4X_ONLY :
+ IBA7220_IBC_WIDTH_1X_ONLY;
+
+ /* always enable these on driver reload, not sticky */
+ dd->ipath_ibcddrctrl |=
+ IBA7220_IBC_RXPOL_MASK << IBA7220_IBC_RXPOL_SHIFT;
+ dd->ipath_ibcddrctrl |=
+ IBA7220_IBC_HRTBT_MASK << IBA7220_IBC_HRTBT_SHIFT;
+ /*
+ * automatic lane reversal detection for receive
+ * doesn't work correctly in rev 1, so disable it
+ * on that rev, otherwise enable (disabling not
+ * sticky across reload for >rev1)
+ */
+ if (dd->ipath_minrev == 1)
+ dd->ipath_ibcddrctrl &=
+ ~IBA7220_IBC_LANE_REV_SUPPORTED;
+ else
+ dd->ipath_ibcddrctrl |=
+ IBA7220_IBC_LANE_REV_SUPPORTED;
+ }
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcddrctrl,
+ dd->ipath_ibcddrctrl);
+
+ ipath_write_kreg(dd, IPATH_KREG_OFFSET(IBNCModeCtrl), 0Ull);
+
+ /* IBA7220 has SERDES MPU reset in D0 of what _was_ IBPLLCfg */
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibserdesctrl);
+ /* remember if uC was in Reset or not, for dactrim */
+ was_reset = (val & 1);
+ ipath_cdbg(VERBOSE, "IBReset %s xgxsconfig %llx\n",
+ was_reset ? "Asserted" : "Negated", (unsigned long long)
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
+
+ if (dd->ipath_boardrev) {
+ /*
+ * Hardware is not emulator, and may have been reset. Init it.
+ * Below will release reset, but needs to know if chip was
+ * originally in reset, to only trim DACs on first time
+ * after chip reset or powercycle (not driver reload)
+ */
+ ret = ipath_sd7220_init(dd, was_reset);
+ }
+
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+ prev_val = val;
+ val |= INFINIPATH_XGXS_FC_SAFE;
+ if (val != prev_val) {
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ }
+ if (val & INFINIPATH_XGXS_RESET)
+ val &= ~INFINIPATH_XGXS_RESET;
+ if (val != prev_val)
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+
+ ipath_cdbg(VERBOSE, "done: xgxs=%llx from %llx\n",
+ (unsigned long long)
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig),
+ prev_val);
+
+ guid = be64_to_cpu(dd->ipath_guid);
+
+ if (!guid) {
+ /* have to have something, so use likely unique tsc */
+ guid = get_cycles();
+ ipath_dbg("No GUID for heartbeat, faking %llx\n",
+ (unsigned long long)guid);
+ } else
+ ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n", guid);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hrtbt_guid, guid);
+ return ret;
+}
+
+static void ipath_7220_config_jint(struct ipath_devdata *dd,
+ u16 idle_ticks, u16 max_packets)
+{
+
+ /*
+ * We can request a receive interrupt for 1 or more packets
+ * from current offset.
+ */
+ if (idle_ticks == 0 || max_packets == 0)
+ /* interrupt after one packet if no mitigation */
+ dd->ipath_rhdrhead_intr_off =
+ 1ULL << IBA7220_HDRHEAD_PKTINT_SHIFT;
+ else
+ /* Turn off RcvHdrHead interrupts if using mitigation */
+ dd->ipath_rhdrhead_intr_off = 0ULL;
+
+ /* refresh kernel RcvHdrHead registers... */
+ ipath_write_ureg(dd, ur_rcvhdrhead,
+ dd->ipath_rhdrhead_intr_off |
+ dd->ipath_pd[0]->port_head, 0);
+
+ dd->ipath_jint_max_packets = max_packets;
+ dd->ipath_jint_idle_ticks = idle_ticks;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_jintreload,
+ ((u64) max_packets << INFINIPATH_JINT_PACKETSHIFT) |
+ idle_ticks);
+}
+
+/**
+ * ipath_7220_quiet_serdes - set serdes to txidle
+ * @dd: the infinipath device
+ * Called when driver is being unloaded
+ */
+static void ipath_7220_quiet_serdes(struct ipath_devdata *dd)
+{
+ u64 val;
+ dd->ipath_flags &= ~IPATH_IB_AUTONEG_INPROG;
+ wake_up(&dd->ipath_autoneg_wait);
+ cancel_delayed_work(&dd->ipath_autoneg_work);
+ flush_scheduled_work();
+ ipath_shutdown_relock_poll(dd);
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+ val |= INFINIPATH_XGXS_RESET;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+}
+
+static int ipath_7220_intconfig(struct ipath_devdata *dd)
+{
+ ipath_7220_config_jint(dd, dd->ipath_jint_idle_ticks,
+ dd->ipath_jint_max_packets);
+ return 0;
+}
+
+/**
+ * ipath_setup_7220_setextled - set the state of the two external LEDs
+ * @dd: the infinipath device
+ * @lst: the L state
+ * @ltst: the LT state
+ *
+ * These LEDs indicate the physical and logical state of IB link.
+ * For this chip (at least with recommended board pinouts), LED1
+ * is Yellow (logical state) and LED2 is Green (physical state),
+ *
+ * Note: We try to match the Mellanox HCA LED behavior as best
+ * we can. Green indicates physical link state is OK (something is
+ * plugged in, and we can train).
+ * Amber indicates the link is logically up (ACTIVE).
+ * Mellanox further blinks the amber LED to indicate data packet
+ * activity, but we have no hardware support for that, so it would
+ * require waking up every 10-20 msecs and checking the counters
+ * on the chip, and then turning the LED off if appropriate. That's
+ * visible overhead, so not something we will do.
+ *
+ */
+static void ipath_setup_7220_setextled(struct ipath_devdata *dd, u64 lst,
+ u64 ltst)
+{
+ u64 extctl, ledblink = 0;
+ unsigned long flags = 0;
+
+ /* the diags use the LED to indicate diag info, so we leave
+ * the external LED alone when the diags are running */
+ if (ipath_diag_inuse)
+ return;
+
+ /* Allow override of LED display for, e.g. Locating system in rack */
+ if (dd->ipath_led_override) {
+ ltst = (dd->ipath_led_override & IPATH_LED_PHYS)
+ ? INFINIPATH_IBCS_LT_STATE_LINKUP
+ : INFINIPATH_IBCS_LT_STATE_DISABLED;
+ lst = (dd->ipath_led_override & IPATH_LED_LOG)
+ ? INFINIPATH_IBCS_L_STATE_ACTIVE
+ : INFINIPATH_IBCS_L_STATE_DOWN;
+ }
+
+ spin_lock_irqsave(&dd->ipath_gpio_lock, flags);
+ extctl = dd->ipath_extctrl & ~(INFINIPATH_EXTC_LED1PRIPORT_ON |
+ INFINIPATH_EXTC_LED2PRIPORT_ON);
+ if (ltst == INFINIPATH_IBCS_LT_STATE_LINKUP) {
+ extctl |= INFINIPATH_EXTC_LED1PRIPORT_ON;
+ /*
+ * counts are in chip clock (4ns) periods.
+ * This is 1/16 sec (66.6ms) on,
+ * 3/16 sec (187.5 ms) off, with packets rcvd
+ */
+ ledblink = ((66600*1000UL/4) << IBA7220_LEDBLINK_ON_SHIFT)
+ | ((187500*1000UL/4) << IBA7220_LEDBLINK_OFF_SHIFT);
+ }
+ if (lst == INFINIPATH_IBCS_L_STATE_ACTIVE)
+ extctl |= INFINIPATH_EXTC_LED2PRIPORT_ON;
+ dd->ipath_extctrl = extctl;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_extctrl, extctl);
+ spin_unlock_irqrestore(&dd->ipath_gpio_lock, flags);
+
+ if (ledblink) /* blink the LED on packet receive */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvpktledcnt,
+ ledblink);
+}
+
+/*
+ * Similar to pci_intx(pdev, 1), except that we make sure
+ * msi is off...
+ */
+static void ipath_enable_intx(struct pci_dev *pdev)
+{
+ u16 cw, new;
+ int pos;
+
+ /* first, turn on INTx */
+ pci_read_config_word(pdev, PCI_COMMAND, &cw);
+ new = cw & ~PCI_COMMAND_INTX_DISABLE;
+ if (new != cw)
+ pci_write_config_word(pdev, PCI_COMMAND, new);
+
+ /* then turn off MSI */
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ if (pos) {
+ pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &cw);
+ new = cw & ~PCI_MSI_FLAGS_ENABLE;
+ if (new != cw)
+ pci_write_config_word(pdev, pos + PCI_MSI_FLAGS, new);
+ }
+}
+
+static int ipath_msi_enabled(struct pci_dev *pdev)
+{
+ int pos, ret = 0;
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ if (pos) {
+ u16 cw;
+
+ pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &cw);
+ ret = !!(cw & PCI_MSI_FLAGS_ENABLE);
+ }
+ return ret;
+}
+
+/*
+ * disable msi interrupt if enabled, and clear the flag.
+ * flag is used primarily for the fallback to IntX, but
+ * is also used in reinit after reset as a flag.
+ */
+static void ipath_7220_nomsi(struct ipath_devdata *dd)
+{
+ dd->ipath_msi_lo = 0;
+#ifdef CONFIG_PCI_MSI
+ if (ipath_msi_enabled(dd->pcidev)) {
+ /*
+ * free, but don't zero; later kernels require
+ * it be freed before disable_msi, so the intx
+ * setup has to request it again.
+ */
+ if (dd->ipath_irq)
+ free_irq(dd->ipath_irq, dd);
+ pci_disable_msi(dd->pcidev);
+ }
+#endif
+}
+
+/*
+ * ipath_setup_7220_cleanup - clean up any per-chip chip-specific stuff
+ * @dd: the infinipath device
+ *
+ * Nothing but msi interrupt cleanup for now.
+ *
+ * This is called during driver unload.
+ */
+static void ipath_setup_7220_cleanup(struct ipath_devdata *dd)
+{
+ ipath_7220_nomsi(dd);
+}
+
+
+static void ipath_7220_pcie_params(struct ipath_devdata *dd, u32 boardrev)
+{
+ u16 linkstat, minwidth, speed;
+ int pos;
+
+ pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_EXP);
+ if (!pos) {
+ ipath_dev_err(dd, "Can't find PCI Express capability!\n");
+ goto bail;
+ }
+
+ pci_read_config_word(dd->pcidev, pos + PCI_EXP_LNKSTA,
+ &linkstat);
+ /*
+ * speed is bits 0-4, linkwidth is bits 4-8
+ * no defines for them in headers
+ */
+ speed = linkstat & 0xf;
+ linkstat >>= 4;
+ linkstat &= 0x1f;
+ dd->ipath_lbus_width = linkstat;
+ switch (boardrev) {
+ case 0:
+ case 2:
+ case 10:
+ case 12:
+ minwidth = 16; /* x16 capable boards */
+ break;
+ default:
+ minwidth = 8; /* x8 capable boards */
+ break;
+ }
+
+ switch (speed) {
+ case 1:
+ dd->ipath_lbus_speed = 2500; /* Gen1, 2.5GHz */
+ break;
+ case 2:
+ dd->ipath_lbus_speed = 5000; /* Gen1, 5GHz */
+ break;
+ default: /* not defined, assume gen1 */
+ dd->ipath_lbus_speed = 2500;
+ break;
+ }
+
+ if (linkstat < minwidth)
+ ipath_dev_err(dd,
+ "PCIe width %u (x%u HCA), performance "
+ "reduced\n", linkstat, minwidth);
+ else
+ ipath_cdbg(VERBOSE, "PCIe speed %u width %u (x%u HCA)\n",
+ dd->ipath_lbus_speed, linkstat, minwidth);
+
+ if (speed != 1)
+ ipath_dev_err(dd,
+ "PCIe linkspeed %u is incorrect; "
+ "should be 1 (2500)!\n", speed);
+
+bail:
+ /* fill in string, even on errors */
+ snprintf(dd->ipath_lbus_info, sizeof(dd->ipath_lbus_info),
+ "PCIe,%uMHz,x%u\n",
+ dd->ipath_lbus_speed,
+ dd->ipath_lbus_width);
+ return;
+}
+
+
+/**
+ * ipath_setup_7220_config - setup PCIe config related stuff
+ * @dd: the infinipath device
+ * @pdev: the PCI device
+ *
+ * The pci_enable_msi() call will fail on systems with MSI quirks
+ * such as those with AMD8131, even if the device of interest is not
+ * attached to that device, (in the 2.6.13 - 2.6.15 kernels, at least, fixed
+ * late in 2.6.16).
+ * All that can be done is to edit the kernel source to remove the quirk
+ * check until that is fixed.
+ * We do not need to call enable_msi() for our HyperTransport chip,
+ * even though it uses MSI, and we want to avoid the quirk warning, so
+ * So we call enable_msi only for PCIe. If we do end up needing
+ * pci_enable_msi at some point in the future for HT, we'll move the
+ * call back into the main init_one code.
+ * We save the msi lo and hi values, so we can restore them after
+ * chip reset (the kernel PCI infrastructure doesn't yet handle that
+ * correctly).
+ */
+static int ipath_setup_7220_config(struct ipath_devdata *dd,
+ struct pci_dev *pdev)
+{
+ int pos, ret = -1;
+ u32 boardrev;
+
+ dd->ipath_msi_lo = 0; /* used as a flag during reset processing */
+#ifdef CONFIG_PCI_MSI
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ if (!strcmp(int_type, "force_msi") || !strcmp(int_type, "auto"))
+ ret = pci_enable_msi(pdev);
+ if (ret) {
+ if (!strcmp(int_type, "force_msi")) {
+ ipath_dev_err(dd, "pci_enable_msi failed: %d, "
+ "force_msi is on, so not continuing.\n",
+ ret);
+ return ret;
+ }
+
+ ipath_enable_intx(pdev);
+ if (!strcmp(int_type, "auto"))
+ ipath_dev_err(dd, "pci_enable_msi failed: %d, "
+ "falling back to INTx\n", ret);
+ } else if (pos) {
+ u16 control;
+ pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_LO,
+ &dd->ipath_msi_lo);
+ pci_read_config_dword(pdev, pos + PCI_MSI_ADDRESS_HI,
+ &dd->ipath_msi_hi);
+ pci_read_config_word(pdev, pos + PCI_MSI_FLAGS,
+ &control);
+ /* now save the data (vector) info */
+ pci_read_config_word(pdev,
+ pos + ((control & PCI_MSI_FLAGS_64BIT)
+ ? PCI_MSI_DATA_64 :
+ PCI_MSI_DATA_32),
+ &dd->ipath_msi_data);
+ } else
+ ipath_dev_err(dd, "Can't find MSI capability, "
+ "can't save MSI settings for reset\n");
+#else
+ ipath_dbg("PCI_MSI not configured, using IntX interrupts\n");
+ ipath_enable_intx(pdev);
+#endif
+
+ dd->ipath_irq = pdev->irq;
+
+ /*
+ * We save the cachelinesize also, although it doesn't
+ * really matter.
+ */
+ pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE,
+ &dd->ipath_pci_cacheline);
+
+ /*
+ * this function called early, ipath_boardrev not set yet. Can't
+ * use ipath_read_kreg64() yet, too early in init, so use readq()
+ */
+ boardrev = (readq(&dd->ipath_kregbase[dd->ipath_kregs->kr_revision])
+ >> INFINIPATH_R_BOARDID_SHIFT) & INFINIPATH_R_BOARDID_MASK;
+
+ ipath_7220_pcie_params(dd, boardrev);
+
+ dd->ipath_flags |= IPATH_NODMA_RTAIL | IPATH_HAS_SEND_DMA |
+ IPATH_HAS_PBC_CNT | IPATH_HAS_THRESH_UPDATE;
+ dd->ipath_pioupd_thresh = 4U; /* set default update threshold */
+ return 0;
+}
+
+static void ipath_init_7220_variables(struct ipath_devdata *dd)
+{
+ /*
+ * setup the register offsets, since they are different for each
+ * chip
+ */
+ dd->ipath_kregs = &ipath_7220_kregs;
+ dd->ipath_cregs = &ipath_7220_cregs;
+
+ /*
+ * bits for selecting i2c direction and values,
+ * used for I2C serial flash
+ */
+ dd->ipath_gpio_sda_num = _IPATH_GPIO_SDA_NUM;
+ dd->ipath_gpio_scl_num = _IPATH_GPIO_SCL_NUM;
+ dd->ipath_gpio_sda = IPATH_GPIO_SDA;
+ dd->ipath_gpio_scl = IPATH_GPIO_SCL;
+
+ /*
+ * Fill in data for field-values that change in IBA7220.
+ * We dynamically specify only the mask for LINKTRAININGSTATE
+ * and only the shift for LINKSTATE, as they are the only ones
+ * that change. Also precalculate the 3 link states of interest
+ * and the combined mask.
+ */
+ dd->ibcs_ls_shift = IBA7220_IBCS_LINKSTATE_SHIFT;
+ dd->ibcs_lts_mask = IBA7220_IBCS_LINKTRAININGSTATE_MASK;
+ dd->ibcs_mask = (INFINIPATH_IBCS_LINKSTATE_MASK <<
+ dd->ibcs_ls_shift) | dd->ibcs_lts_mask;
+ dd->ib_init = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+ (INFINIPATH_IBCS_L_STATE_INIT << dd->ibcs_ls_shift);
+ dd->ib_arm = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+ (INFINIPATH_IBCS_L_STATE_ARM << dd->ibcs_ls_shift);
+ dd->ib_active = (INFINIPATH_IBCS_LT_STATE_LINKUP <<
+ INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) |
+ (INFINIPATH_IBCS_L_STATE_ACTIVE << dd->ibcs_ls_shift);
+
+ /*
+ * Fill in data for ibcc field-values that change in IBA7220.
+ * We dynamically specify only the mask for LINKINITCMD
+ * and only the shift for LINKCMD and MAXPKTLEN, as they are
+ * the only ones that change.
+ */
+ dd->ibcc_lic_mask = IBA7220_IBCC_LINKINITCMD_MASK;
+ dd->ibcc_lc_shift = IBA7220_IBCC_LINKCMD_SHIFT;
+ dd->ibcc_mpl_shift = IBA7220_IBCC_MAXPKTLEN_SHIFT;
+
+ /* Fill in shifts for RcvCtrl. */
+ dd->ipath_r_portenable_shift = INFINIPATH_R_PORTENABLE_SHIFT;
+ dd->ipath_r_intravail_shift = IBA7220_R_INTRAVAIL_SHIFT;
+ dd->ipath_r_tailupd_shift = IBA7220_R_TAILUPD_SHIFT;
+ dd->ipath_r_portcfg_shift = IBA7220_R_PORTCFG_SHIFT;
+
+ /* variables for sanity checking interrupt and errors */
+ dd->ipath_hwe_bitsextant =
+ (INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT) |
+ (INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT) |
+ (INFINIPATH_HWE_PCIEMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_PCIEMEMPARITYERR_SHIFT) |
+ INFINIPATH_HWE_PCIE1PLLFAILED |
+ INFINIPATH_HWE_PCIE0PLLFAILED |
+ INFINIPATH_HWE_PCIEPOISONEDTLP |
+ INFINIPATH_HWE_PCIECPLTIMEOUT |
+ INFINIPATH_HWE_PCIEBUSPARITYXTLH |
+ INFINIPATH_HWE_PCIEBUSPARITYXADM |
+ INFINIPATH_HWE_PCIEBUSPARITYRADM |
+ INFINIPATH_HWE_MEMBISTFAILED |
+ INFINIPATH_HWE_COREPLL_FBSLIP |
+ INFINIPATH_HWE_COREPLL_RFSLIP |
+ INFINIPATH_HWE_SERDESPLLFAILED |
+ INFINIPATH_HWE_IBCBUSTOSPCPARITYERR |
+ INFINIPATH_HWE_IBCBUSFRSPCPARITYERR |
+ INFINIPATH_HWE_PCIECPLDATAQUEUEERR |
+ INFINIPATH_HWE_PCIECPLHDRQUEUEERR |
+ INFINIPATH_HWE_SDMAMEMREADERR |
+ INFINIPATH_HWE_CLK_UC_PLLNOTLOCKED |
+ INFINIPATH_HWE_PCIESERDESQ0PCLKNOTDETECT |
+ INFINIPATH_HWE_PCIESERDESQ1PCLKNOTDETECT |
+ INFINIPATH_HWE_PCIESERDESQ2PCLKNOTDETECT |
+ INFINIPATH_HWE_PCIESERDESQ3PCLKNOTDETECT |
+ INFINIPATH_HWE_DDSRXEQMEMORYPARITYERR |
+ INFINIPATH_HWE_IB_UC_MEMORYPARITYERR |
+ INFINIPATH_HWE_PCIE_UC_OCT0MEMORYPARITYERR |
+ INFINIPATH_HWE_PCIE_UC_OCT1MEMORYPARITYERR;
+ dd->ipath_i_bitsextant =
+ INFINIPATH_I_SDMAINT | INFINIPATH_I_SDMADISABLED |
+ (INFINIPATH_I_RCVURG_MASK << INFINIPATH_I_RCVURG_SHIFT) |
+ (INFINIPATH_I_RCVAVAIL_MASK <<
+ INFINIPATH_I_RCVAVAIL_SHIFT) |
+ INFINIPATH_I_ERROR | INFINIPATH_I_SPIOSENT |
+ INFINIPATH_I_SPIOBUFAVAIL | INFINIPATH_I_GPIO |
+ INFINIPATH_I_JINT | INFINIPATH_I_SERDESTRIMDONE;
+ dd->ipath_e_bitsextant =
+ INFINIPATH_E_RFORMATERR | INFINIPATH_E_RVCRC |
+ INFINIPATH_E_RICRC | INFINIPATH_E_RMINPKTLEN |
+ INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RLONGPKTLEN |
+ INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RUNEXPCHAR |
+ INFINIPATH_E_RUNSUPVL | INFINIPATH_E_REBP |
+ INFINIPATH_E_RIBFLOW | INFINIPATH_E_RBADVERSION |
+ INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
+ INFINIPATH_E_RBADTID | INFINIPATH_E_RHDRLEN |
+ INFINIPATH_E_RHDR | INFINIPATH_E_RIBLOSTLINK |
+ INFINIPATH_E_SENDSPECIALTRIGGER |
+ INFINIPATH_E_SDMADISABLED | INFINIPATH_E_SMINPKTLEN |
+ INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SUNDERRUN |
+ INFINIPATH_E_SPKTLEN | INFINIPATH_E_SDROPPEDSMPPKT |
+ INFINIPATH_E_SDROPPEDDATAPKT |
+ INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM |
+ INFINIPATH_E_SUNSUPVL | INFINIPATH_E_SENDBUFMISUSE |
+ INFINIPATH_E_SDMAGENMISMATCH | INFINIPATH_E_SDMAOUTOFBOUND |
+ INFINIPATH_E_SDMATAILOUTOFBOUND | INFINIPATH_E_SDMABASE |
+ INFINIPATH_E_SDMA1STDESC | INFINIPATH_E_SDMARPYTAG |
+ INFINIPATH_E_SDMADWEN | INFINIPATH_E_SDMAMISSINGDW |
+ INFINIPATH_E_SDMAUNEXPDATA |
+ INFINIPATH_E_IBSTATUSCHANGED | INFINIPATH_E_INVALIDADDR |
+ INFINIPATH_E_RESET | INFINIPATH_E_HARDWARE |
+ INFINIPATH_E_SDMADESCADDRMISALIGN |
+ INFINIPATH_E_INVALIDEEPCMD;
+
+ dd->ipath_i_rcvavail_mask = INFINIPATH_I_RCVAVAIL_MASK;
+ dd->ipath_i_rcvurg_mask = INFINIPATH_I_RCVURG_MASK;
+ dd->ipath_i_rcvavail_shift = INFINIPATH_I_RCVAVAIL_SHIFT;
+ dd->ipath_i_rcvurg_shift = INFINIPATH_I_RCVURG_SHIFT;
+ dd->ipath_flags |= IPATH_INTREG_64 | IPATH_HAS_MULT_IB_SPEED
+ | IPATH_HAS_LINK_LATENCY;
+
+ /*
+ * EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
+ * 2 is Some Misc, 3 is reserved for future.
+ */
+ dd->ipath_eep_st_masks[0].hwerrs_to_log =
+ INFINIPATH_HWE_TXEMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT;
+
+ dd->ipath_eep_st_masks[1].hwerrs_to_log =
+ INFINIPATH_HWE_RXEMEMPARITYERR_MASK <<
+ INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT;
+
+ dd->ipath_eep_st_masks[2].errs_to_log = INFINIPATH_E_RESET;
+
+ ipath_linkrecovery = 0;
+
+ init_waitqueue_head(&dd->ipath_autoneg_wait);
+ INIT_DELAYED_WORK(&dd->ipath_autoneg_work, autoneg_work);
+
+ dd->ipath_link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
+ dd->ipath_link_speed_supported = IPATH_IB_SDR | IPATH_IB_DDR;
+
+ dd->ipath_link_width_enabled = dd->ipath_link_width_supported;
+ dd->ipath_link_speed_enabled = dd->ipath_link_speed_supported;
+ /*
+ * set the initial values to reasonable default, will be set
+ * for real when link is up.
+ */
+ dd->ipath_link_width_active = IB_WIDTH_4X;
+ dd->ipath_link_speed_active = IPATH_IB_SDR;
+ dd->delay_mult = rate_to_delay[0][1];
+}
+
+
+/*
+ * Setup the MSI stuff again after a reset. I'd like to just call
+ * pci_enable_msi() and request_irq() again, but when I do that,
+ * the MSI enable bit doesn't get set in the command word, and
+ * we switch to to a different interrupt vector, which is confusing,
+ * so I instead just do it all inline. Perhaps somehow can tie this
+ * into the PCIe hotplug support at some point
+ * Note, because I'm doing it all here, I don't call pci_disable_msi()
+ * or free_irq() at the start of ipath_setup_7220_reset().
+ */
+static int ipath_reinit_msi(struct ipath_devdata *dd)
+{
+ int ret = 0;
+#ifdef CONFIG_PCI_MSI
+ int pos;
+ u16 control;
+ if (!dd->ipath_msi_lo) /* Using intX, or init problem */
+ goto bail;
+
+ pos = pci_find_capability(dd->pcidev, PCI_CAP_ID_MSI);
+ if (!pos) {
+ ipath_dev_err(dd, "Can't find MSI capability, "
+ "can't restore MSI settings\n");
+ goto bail;
+ }
+ ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n",
+ dd->ipath_msi_lo, pos + PCI_MSI_ADDRESS_LO);
+ pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_LO,
+ dd->ipath_msi_lo);
+ ipath_cdbg(VERBOSE, "Writing msi_lo 0x%x to config offset 0x%x\n",
+ dd->ipath_msi_hi, pos + PCI_MSI_ADDRESS_HI);
+ pci_write_config_dword(dd->pcidev, pos + PCI_MSI_ADDRESS_HI,
+ dd->ipath_msi_hi);
+ pci_read_config_word(dd->pcidev, pos + PCI_MSI_FLAGS, &control);
+ if (!(control & PCI_MSI_FLAGS_ENABLE)) {
+ ipath_cdbg(VERBOSE, "MSI control at off %x was %x, "
+ "setting MSI enable (%x)\n", pos + PCI_MSI_FLAGS,
+ control, control | PCI_MSI_FLAGS_ENABLE);
+ control |= PCI_MSI_FLAGS_ENABLE;
+ pci_write_config_word(dd->pcidev, pos + PCI_MSI_FLAGS,
+ control);
+ }
+ /* now rewrite the data (vector) info */
+ pci_write_config_word(dd->pcidev, pos +
+ ((control & PCI_MSI_FLAGS_64BIT) ? 12 : 8),
+ dd->ipath_msi_data);
+ ret = 1;
+bail:
+#endif
+ if (!ret) {
+ ipath_dbg("Using IntX, MSI disabled or not configured\n");
+ ipath_enable_intx(dd->pcidev);
+ ret = 1;
+ }
+ /*
+ * We restore the cachelinesize also, although it doesn't really
+ * matter.
+ */
+ pci_write_config_byte(dd->pcidev, PCI_CACHE_LINE_SIZE,
+ dd->ipath_pci_cacheline);
+ /* and now set the pci master bit again */
+ pci_set_master(dd->pcidev);
+
+ return ret;
+}
+
+/*
+ * This routine sleeps, so it can only be called from user context, not
+ * from interrupt context. If we need interrupt context, we can split
+ * it into two routines.
+ */
+static int ipath_setup_7220_reset(struct ipath_devdata *dd)
+{
+ u64 val;
+ int i;
+ int ret;
+ u16 cmdval;
+
+ pci_read_config_word(dd->pcidev, PCI_COMMAND, &cmdval);
+
+ /* Use dev_err so it shows up in logs, etc. */
+ ipath_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->ipath_unit);
+
+ /* keep chip from being accessed in a few places */
+ dd->ipath_flags &= ~(IPATH_INITTED | IPATH_PRESENT);
+ val = dd->ipath_control | INFINIPATH_C_RESET;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control, val);
+ mb();
+
+ for (i = 1; i <= 5; i++) {
+ int r;
+
+ /*
+ * Allow MBIST, etc. to complete; longer on each retry.
+ * We sometimes get machine checks from bus timeout if no
+ * response, so for now, make it *really* long.
+ */
+ msleep(1000 + (1 + i) * 2000);
+ r = pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_0,
+ dd->ipath_pcibar0);
+ if (r)
+ ipath_dev_err(dd, "rewrite of BAR0 failed: %d\n", r);
+ r = pci_write_config_dword(dd->pcidev, PCI_BASE_ADDRESS_1,
+ dd->ipath_pcibar1);
+ if (r)
+ ipath_dev_err(dd, "rewrite of BAR1 failed: %d\n", r);
+ /* now re-enable memory access */
+ pci_write_config_word(dd->pcidev, PCI_COMMAND, cmdval);
+ r = pci_enable_device(dd->pcidev);
+ if (r)
+ ipath_dev_err(dd, "pci_enable_device failed after "
+ "reset: %d\n", r);
+ /*
+ * whether it fully enabled or not, mark as present,
+ * again (but not INITTED)
+ */
+ dd->ipath_flags |= IPATH_PRESENT;
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
+ if (val == dd->ipath_revision) {
+ ipath_cdbg(VERBOSE, "Got matching revision "
+ "register %llx on try %d\n",
+ (unsigned long long) val, i);
+ ret = ipath_reinit_msi(dd);
+ goto bail;
+ }
+ /* Probably getting -1 back */
+ ipath_dbg("Didn't get expected revision register, "
+ "got %llx, try %d\n", (unsigned long long) val,
+ i + 1);
+ }
+ ret = 0; /* failed */
+
+bail:
+ if (ret)
+ ipath_7220_pcie_params(dd, dd->ipath_boardrev);
+
+ return ret;
+}
+
+/**
+ * ipath_7220_put_tid - write a TID to the chip
+ * @dd: the infinipath device
+ * @tidptr: pointer to the expected TID (in chip) to udpate
+ * @tidtype: 0 for eager, 1 for expected
+ * @pa: physical address of in memory buffer; ipath_tidinvalid if freeing
+ *
+ * This exists as a separate routine to allow for selection of the
+ * appropriate "flavor". The static calls in cleanup just use the
+ * revision-agnostic form, as they are not performance critical.
+ */
+static void ipath_7220_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
+ u32 type, unsigned long pa)
+{
+ if (pa != dd->ipath_tidinvalid) {
+ u64 chippa = pa >> IBA7220_TID_PA_SHIFT;
+
+ /* paranoia checks */
+ if (pa != (chippa << IBA7220_TID_PA_SHIFT)) {
+ dev_info(&dd->pcidev->dev, "BUG: physaddr %lx "
+ "not 2KB aligned!\n", pa);
+ return;
+ }
+ if (pa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
+ ipath_dev_err(dd,
+ "BUG: Physical page address 0x%lx "
+ "larger than supported\n", pa);
+ return;
+ }
+
+ if (type == RCVHQ_RCV_TYPE_EAGER)
+ chippa |= dd->ipath_tidtemplate;
+ else /* for now, always full 4KB page */
+ chippa |= IBA7220_TID_SZ_4K;
+ writeq(chippa, tidptr);
+ } else
+ writeq(pa, tidptr);
+ mmiowb();
+}
+
+/**
+ * ipath_7220_clear_tid - clear all TID entries for a port, expected and eager
+ * @dd: the infinipath device
+ * @port: the port
+ *
+ * clear all TID entries for a port, expected and eager.
+ * Used from ipath_close(). On this chip, TIDs are only 32 bits,
+ * not 64, but they are still on 64 bit boundaries, so tidbase
+ * is declared as u64 * for the pointer math, even though we write 32 bits
+ */
+static void ipath_7220_clear_tids(struct ipath_devdata *dd, unsigned port)
+{
+ u64 __iomem *tidbase;
+ unsigned long tidinv;
+ int i;
+
+ if (!dd->ipath_kregbase)
+ return;
+
+ ipath_cdbg(VERBOSE, "Invalidate TIDs for port %u\n", port);
+
+ tidinv = dd->ipath_tidinvalid;
+ tidbase = (u64 __iomem *)
+ ((char __iomem *)(dd->ipath_kregbase) +
+ dd->ipath_rcvtidbase +
+ port * dd->ipath_rcvtidcnt * sizeof(*tidbase));
+
+ for (i = 0; i < dd->ipath_rcvtidcnt; i++)
+ ipath_7220_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
+ tidinv);
+
+ tidbase = (u64 __iomem *)
+ ((char __iomem *)(dd->ipath_kregbase) +
+ dd->ipath_rcvegrbase + port_egrtid_idx(dd, port)
+ * sizeof(*tidbase));
+
+ for (i = port ? dd->ipath_rcvegrcnt : dd->ipath_p0_rcvegrcnt; i; i--)
+ ipath_7220_put_tid(dd, &tidbase[i-1], RCVHQ_RCV_TYPE_EAGER,
+ tidinv);
+}
+
+/**
+ * ipath_7220_tidtemplate - setup constants for TID updates
+ * @dd: the infinipath device
+ *
+ * We setup stuff that we use a lot, to avoid calculating each time
+ */
+static void ipath_7220_tidtemplate(struct ipath_devdata *dd)
+{
+ /* For now, we always allocate 4KB buffers (at init) so we can
+ * receive max size packets. We may want a module parameter to
+ * specify 2KB or 4KB and/or make be per port instead of per device
+ * for those who want to reduce memory footprint. Note that the
+ * ipath_rcvhdrentsize size must be large enough to hold the largest
+ * IB header (currently 96 bytes) that we expect to handle (plus of
+ * course the 2 dwords of RHF).
+ */
+ if (dd->ipath_rcvegrbufsize == 2048)
+ dd->ipath_tidtemplate = IBA7220_TID_SZ_2K;
+ else if (dd->ipath_rcvegrbufsize == 4096)
+ dd->ipath_tidtemplate = IBA7220_TID_SZ_4K;
+ else {
+ dev_info(&dd->pcidev->dev, "BUG: unsupported egrbufsize "
+ "%u, using %u\n", dd->ipath_rcvegrbufsize,
+ 4096);
+ dd->ipath_tidtemplate = IBA7220_TID_SZ_4K;
+ }
+ dd->ipath_tidinvalid = 0;
+}
+
+static int ipath_7220_early_init(struct ipath_devdata *dd)
+{
+ u32 i, s;
+
+ if (strcmp(int_type, "auto") &&
+ strcmp(int_type, "force_msi") &&
+ strcmp(int_type, "force_intx")) {
+ ipath_dev_err(dd, "Invalid interrupt_type: '%s', expecting "
+ "auto, force_msi or force_intx\n", int_type);
+ return -EINVAL;
+ }
+
+ /*
+ * Control[4] has been added to change the arbitration within
+ * the SDMA engine between favoring data fetches over descriptor
+ * fetches. ipath_sdma_fetch_arb==0 gives data fetches priority.
+ */
+ if (ipath_sdma_fetch_arb && (dd->ipath_minrev > 1))
+ dd->ipath_control |= 1<<4;
+
+ dd->ipath_flags |= IPATH_4BYTE_TID;
+
+ /*
+ * For openfabrics, we need to be able to handle an IB header of
+ * 24 dwords. HT chip has arbitrary sized receive buffers, so we
+ * made them the same size as the PIO buffers. This chip does not
+ * handle arbitrary size buffers, so we need the header large enough
+ * to handle largest IB header, but still have room for a 2KB MTU
+ * standard IB packet.
+ */
+ dd->ipath_rcvhdrentsize = 24;
+ dd->ipath_rcvhdrsize = IPATH_DFLT_RCVHDRSIZE;
+ dd->ipath_rhf_offset =
+ dd->ipath_rcvhdrentsize - sizeof(u64) / sizeof(u32);
+
+ dd->ipath_rcvegrbufsize = ipath_mtu4096 ? 4096 : 2048;
+ /*
+ * the min() check here is currently a nop, but it may not always
+ * be, depending on just how we do ipath_rcvegrbufsize
+ */
+ dd->ipath_ibmaxlen = min(ipath_mtu4096 ? dd->ipath_piosize4k :
+ dd->ipath_piosize2k,
+ dd->ipath_rcvegrbufsize +
+ (dd->ipath_rcvhdrentsize << 2));
+ dd->ipath_init_ibmaxlen = dd->ipath_ibmaxlen;
+
+ ipath_7220_config_jint(dd, INFINIPATH_JINT_DEFAULT_IDLE_TICKS,
+ INFINIPATH_JINT_DEFAULT_MAX_PACKETS);
+
+ if (dd->ipath_boardrev) /* no eeprom on emulator */
+ ipath_get_eeprom_info(dd);
+
+ /* start of code to check and print procmon */
+ s = ipath_read_kreg32(dd, IPATH_KREG_OFFSET(ProcMon));
+ s &= ~(1U<<31); /* clear done bit */
+ s |= 1U<<14; /* clear counter (write 1 to clear) */
+ ipath_write_kreg(dd, IPATH_KREG_OFFSET(ProcMon), s);
+ /* make sure clear_counter low long enough before start */
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+
+ s &= ~(1U<<14); /* allow counter to count (before starting) */
+ ipath_write_kreg(dd, IPATH_KREG_OFFSET(ProcMon), s);
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ s = ipath_read_kreg32(dd, IPATH_KREG_OFFSET(ProcMon));
+
+ s |= 1U<<15; /* start the counter */
+ s &= ~(1U<<31); /* clear done bit */
+ s &= ~0x7ffU; /* clear frequency bits */
+ s |= 0xe29; /* set frequency bits, in case cleared */
+ ipath_write_kreg(dd, IPATH_KREG_OFFSET(ProcMon), s);
+
+ s = 0;
+ for (i = 500; i > 0 && !(s&(1ULL<<31)); i--) {
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ s = ipath_read_kreg32(dd, IPATH_KREG_OFFSET(ProcMon));
+ }
+ if (!(s&(1U<<31)))
+ ipath_dev_err(dd, "ProcMon register not valid: 0x%x\n", s);
+ else
+ ipath_dbg("ProcMon=0x%x, count=0x%x\n", s, (s>>16)&0x1ff);
+
+ return 0;
+}
+
+/**
+ * ipath_init_7220_get_base_info - set chip-specific flags for user code
+ * @pd: the infinipath port
+ * @kbase: ipath_base_info pointer
+ *
+ * We set the PCIE flag because the lower bandwidth on PCIe vs
+ * HyperTransport can affect some user packet algorithims.
+ */
+static int ipath_7220_get_base_info(struct ipath_portdata *pd, void *kbase)
+{
+ struct ipath_base_info *kinfo = kbase;
+
+ kinfo->spi_runtime_flags |=
+ IPATH_RUNTIME_PCIE | IPATH_RUNTIME_NODMA_RTAIL |
+ IPATH_RUNTIME_SDMA;
+
+ return 0;
+}
+
+static void ipath_7220_free_irq(struct ipath_devdata *dd)
+{
+ free_irq(dd->ipath_irq, dd);
+ dd->ipath_irq = 0;
+}
+
+static struct ipath_message_header *
+ipath_7220_get_msgheader(struct ipath_devdata *dd, __le32 *rhf_addr)
+{
+ u32 offset = ipath_hdrget_offset(rhf_addr);
+
+ return (struct ipath_message_header *)
+ (rhf_addr - dd->ipath_rhf_offset + offset);
+}
+
+static void ipath_7220_config_ports(struct ipath_devdata *dd, ushort cfgports)
+{
+ u32 nchipports;
+
+ nchipports = ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
+ if (!cfgports) {
+ int ncpus = num_online_cpus();
+
+ if (ncpus <= 4)
+ dd->ipath_portcnt = 5;
+ else if (ncpus <= 8)
+ dd->ipath_portcnt = 9;
+ if (dd->ipath_portcnt)
+ ipath_dbg("Auto-configured for %u ports, %d cpus "
+ "online\n", dd->ipath_portcnt, ncpus);
+ } else if (cfgports <= nchipports)
+ dd->ipath_portcnt = cfgports;
+ if (!dd->ipath_portcnt) /* none of the above, set to max */
+ dd->ipath_portcnt = nchipports;
+ /*
+ * chip can be configured for 5, 9, or 17 ports, and choice
+ * affects number of eager TIDs per port (1K, 2K, 4K).
+ */
+ if (dd->ipath_portcnt > 9)
+ dd->ipath_rcvctrl |= 2ULL << IBA7220_R_PORTCFG_SHIFT;
+ else if (dd->ipath_portcnt > 5)
+ dd->ipath_rcvctrl |= 1ULL << IBA7220_R_PORTCFG_SHIFT;
+ /* else configure for default 5 receive ports */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+ dd->ipath_p0_rcvegrcnt = 2048; /* always */
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ dd->ipath_pioreserved = 1; /* reserve a buffer */
+}
+
+
+static int ipath_7220_get_ib_cfg(struct ipath_devdata *dd, int which)
+{
+ int lsb, ret = 0;
+ u64 maskr; /* right-justified mask */
+
+ switch (which) {
+ case IPATH_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */
+ lsb = IBA7220_IBC_HRTBT_SHIFT;
+ maskr = IBA7220_IBC_HRTBT_MASK;
+ break;
+
+ case IPATH_IB_CFG_LWID_ENB: /* Get allowed Link-width */
+ ret = dd->ipath_link_width_enabled;
+ goto done;
+
+ case IPATH_IB_CFG_LWID: /* Get currently active Link-width */
+ ret = dd->ipath_link_width_active;
+ goto done;
+
+ case IPATH_IB_CFG_SPD_ENB: /* Get allowed Link speeds */
+ ret = dd->ipath_link_speed_enabled;
+ goto done;
+
+ case IPATH_IB_CFG_SPD: /* Get current Link spd */
+ ret = dd->ipath_link_speed_active;
+ goto done;
+
+ case IPATH_IB_CFG_RXPOL_ENB: /* Get Auto-RX-polarity enable */
+ lsb = IBA7220_IBC_RXPOL_SHIFT;
+ maskr = IBA7220_IBC_RXPOL_MASK;
+ break;
+
+ case IPATH_IB_CFG_LREV_ENB: /* Get Auto-Lane-reversal enable */
+ lsb = IBA7220_IBC_LREV_SHIFT;
+ maskr = IBA7220_IBC_LREV_MASK;
+ break;
+
+ case IPATH_IB_CFG_LINKLATENCY:
+ ret = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcddrstatus)
+ & IBA7220_DDRSTAT_LINKLAT_MASK;
+ goto done;
+
+ default:
+ ret = -ENOTSUPP;
+ goto done;
+ }
+ ret = (int)((dd->ipath_ibcddrctrl >> lsb) & maskr);
+done:
+ return ret;
+}
+
+static int ipath_7220_set_ib_cfg(struct ipath_devdata *dd, int which, u32 val)
+{
+ int lsb, ret = 0, setforce = 0;
+ u64 maskr; /* right-justified mask */
+
+ switch (which) {
+ case IPATH_IB_CFG_LIDLMC:
+ /*
+ * Set LID and LMC. Combined to avoid possible hazard
+ * caller puts LMC in 16MSbits, DLID in 16LSbits of val
+ */
+ lsb = IBA7220_IBC_DLIDLMC_SHIFT;
+ maskr = IBA7220_IBC_DLIDLMC_MASK;
+ break;
+
+ case IPATH_IB_CFG_HRTBT: /* set Heartbeat off/enable/auto */
+ if (val & IPATH_IB_HRTBT_ON &&
+ (dd->ipath_flags & IPATH_NO_HRTBT))
+ goto bail;
+ lsb = IBA7220_IBC_HRTBT_SHIFT;
+ maskr = IBA7220_IBC_HRTBT_MASK;
+ break;
+
+ case IPATH_IB_CFG_LWID_ENB: /* set allowed Link-width */
+ /*
+ * As with speed, only write the actual register if
+ * the link is currently down, otherwise takes effect
+ * on next link change.
+ */
+ dd->ipath_link_width_enabled = val;
+ if ((dd->ipath_flags & (IPATH_LINKDOWN|IPATH_LINKINIT)) !=
+ IPATH_LINKDOWN)
+ goto bail;
+ /*
+ * We set the IPATH_IB_FORCE_NOTIFY bit so updown
+ * will get called because we want update
+ * link_width_active, and the change may not take
+ * effect for some time (if we are in POLL), so this
+ * flag will force the updown routine to be called
+ * on the next ibstatuschange down interrupt, even
+ * if it's not an down->up transition.
+ */
+ val--; /* convert from IB to chip */
+ maskr = IBA7220_IBC_WIDTH_MASK;
+ lsb = IBA7220_IBC_WIDTH_SHIFT;
+ setforce = 1;
+ dd->ipath_flags |= IPATH_IB_FORCE_NOTIFY;
+ break;
+
+ case IPATH_IB_CFG_SPD_ENB: /* set allowed Link speeds */
+ /*
+ * If we turn off IB1.2, need to preset SerDes defaults,
+ * but not right now. Set a flag for the next time
+ * we command the link down. As with width, only write the
+ * actual register if the link is currently down, otherwise
+ * takes effect on next link change. Since setting is being
+ * explictly requested (via MAD or sysfs), clear autoneg
+ * failure status if speed autoneg is enabled.
+ */
+ dd->ipath_link_speed_enabled = val;
+ if (dd->ipath_ibcddrctrl & IBA7220_IBC_IBTA_1_2_MASK &&
+ !(val & (val - 1)))
+ dd->ipath_presets_needed = 1;
+ if ((dd->ipath_flags & (IPATH_LINKDOWN|IPATH_LINKINIT)) !=
+ IPATH_LINKDOWN)
+ goto bail;
+ /*
+ * We set the IPATH_IB_FORCE_NOTIFY bit so updown
+ * will get called because we want update
+ * link_speed_active, and the change may not take
+ * effect for some time (if we are in POLL), so this
+ * flag will force the updown routine to be called
+ * on the next ibstatuschange down interrupt, even
+ * if it's not an down->up transition. When setting
+ * speed autoneg, clear AUTONEG_FAILED.
+ */
+ if (val == (IPATH_IB_SDR | IPATH_IB_DDR)) {
+ val = IBA7220_IBC_SPEED_AUTONEG_MASK |
+ IBA7220_IBC_IBTA_1_2_MASK;
+ dd->ipath_flags &= ~IPATH_IB_AUTONEG_FAILED;
+ } else
+ val = val == IPATH_IB_DDR ? IBA7220_IBC_SPEED_DDR
+ : IBA7220_IBC_SPEED_SDR;
+ maskr = IBA7220_IBC_SPEED_AUTONEG_MASK |
+ IBA7220_IBC_IBTA_1_2_MASK;
+ lsb = 0; /* speed bits are low bits */
+ setforce = 1;
+ break;
+
+ case IPATH_IB_CFG_RXPOL_ENB: /* set Auto-RX-polarity enable */
+ lsb = IBA7220_IBC_RXPOL_SHIFT;
+ maskr = IBA7220_IBC_RXPOL_MASK;
+ break;
+
+ case IPATH_IB_CFG_LREV_ENB: /* set Auto-Lane-reversal enable */
+ lsb = IBA7220_IBC_LREV_SHIFT;
+ maskr = IBA7220_IBC_LREV_MASK;
+ break;
+
+ default:
+ ret = -ENOTSUPP;
+ goto bail;
+ }
+ dd->ipath_ibcddrctrl &= ~(maskr << lsb);
+ dd->ipath_ibcddrctrl |= (((u64) val & maskr) << lsb);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcddrctrl,
+ dd->ipath_ibcddrctrl);
+ if (setforce)
+ dd->ipath_flags |= IPATH_IB_FORCE_NOTIFY;
+bail:
+ return ret;
+}
+
+static void ipath_7220_read_counters(struct ipath_devdata *dd,
+ struct infinipath_counters *cntrs)
+{
+ u64 *counters = (u64 *) cntrs;
+ int i;
+
+ for (i = 0; i < sizeof(*cntrs) / sizeof(u64); i++)
+ counters[i] = ipath_snap_cntr(dd, i);
+}
+
+/* if we are using MSI, try to fallback to IntX */
+static int ipath_7220_intr_fallback(struct ipath_devdata *dd)
+{
+ if (dd->ipath_msi_lo) {
+ dev_info(&dd->pcidev->dev, "MSI interrupt not detected,"
+ " trying IntX interrupts\n");
+ ipath_7220_nomsi(dd);
+ ipath_enable_intx(dd->pcidev);
+ /*
+ * some newer kernels require free_irq before disable_msi,
+ * and irq can be changed during disable and intx enable
+ * and we need to therefore use the pcidev->irq value,
+ * not our saved MSI value.
+ */
+ dd->ipath_irq = dd->pcidev->irq;
+ if (request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
+ IPATH_DRV_NAME, dd))
+ ipath_dev_err(dd,
+ "Could not re-request_irq for IntX\n");
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * reset the XGXS (between serdes and IBC). Slightly less intrusive
+ * than resetting the IBC or external link state, and useful in some
+ * cases to cause some retraining. To do this right, we reset IBC
+ * as well.
+ */
+static void ipath_7220_xgxs_reset(struct ipath_devdata *dd)
+{
+ u64 val, prev_val;
+
+ prev_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
+ val = prev_val | INFINIPATH_XGXS_RESET;
+ prev_val &= ~INFINIPATH_XGXS_RESET; /* be sure */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control & ~INFINIPATH_C_LINKENABLE);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, prev_val);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
+ dd->ipath_control);
+}
+
+
+/* Still needs cleanup, too much hardwired stuff */
+static void autoneg_send(struct ipath_devdata *dd,
+ u32 *hdr, u32 dcnt, u32 *data)
+{
+ int i;
+ u64 cnt;
+ u32 __iomem *piobuf;
+ u32 pnum;
+
+ i = 0;
+ cnt = 7 + dcnt + 1; /* 7 dword header, dword data, icrc */
+ while (!(piobuf = ipath_getpiobuf(dd, cnt, &pnum))) {
+ if (i++ > 15) {
+ ipath_dbg("Couldn't get pio buffer for send\n");
+ return;
+ }
+ udelay(2);
+ }
+ if (dd->ipath_flags&IPATH_HAS_PBC_CNT)
+ cnt |= 0x80000000UL<<32; /* mark as VL15 */
+ writeq(cnt, piobuf);
+ ipath_flush_wc();
+ __iowrite32_copy(piobuf + 2, hdr, 7);
+ __iowrite32_copy(piobuf + 9, data, dcnt);
+ ipath_flush_wc();
+}
+
+/*
+ * _start packet gets sent twice at start, _done gets sent twice at end
+ */
+static void ipath_autoneg_send(struct ipath_devdata *dd, int which)
+{
+ static u32 swapped;
+ u32 dw, i, hcnt, dcnt, *data;
+ static u32 hdr[7] = { 0xf002ffff, 0x48ffff, 0x6400abba };
+ static u32 madpayload_start[0x40] = {
+ 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
+ 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+ 0x1, 0x1388, 0x15e, 0x1, /* rest 0's */
+ };
+ static u32 madpayload_done[0x40] = {
+ 0x1810103, 0x1, 0x0, 0x0, 0x2c90000, 0x2c9, 0x0, 0x0,
+ 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+ 0x40000001, 0x1388, 0x15e, /* rest 0's */
+ };
+ dcnt = sizeof(madpayload_start)/sizeof(madpayload_start[0]);
+ hcnt = sizeof(hdr)/sizeof(hdr[0]);
+ if (!swapped) {
+ /* for maintainability, do it at runtime */
+ for (i = 0; i < hcnt; i++) {
+ dw = (__force u32) cpu_to_be32(hdr[i]);
+ hdr[i] = dw;
+ }
+ for (i = 0; i < dcnt; i++) {
+ dw = (__force u32) cpu_to_be32(madpayload_start[i]);
+ madpayload_start[i] = dw;
+ dw = (__force u32) cpu_to_be32(madpayload_done[i]);
+ madpayload_done[i] = dw;
+ }
+ swapped = 1;
+ }
+
+ data = which ? madpayload_done : madpayload_start;
+ ipath_cdbg(PKT, "Sending %s special MADs\n", which?"done":"start");
+
+ autoneg_send(dd, hdr, dcnt, data);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ udelay(2);
+ autoneg_send(dd, hdr, dcnt, data);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ udelay(2);
+}
+
+
+
+/*
+ * Do the absolute minimum to cause an IB speed change, and make it
+ * ready, but don't actually trigger the change. The caller will
+ * do that when ready (if link is in Polling training state, it will
+ * happen immediately, otherwise when link next goes down)
+ *
+ * This routine should only be used as part of the DDR autonegotation
+ * code for devices that are not compliant with IB 1.2 (or code that
+ * fixes things up for same).
+ *
+ * When link has gone down, and autoneg enabled, or autoneg has
+ * failed and we give up until next time we set both speeds, and
+ * then we want IBTA enabled as well as "use max enabled speed.
+ */
+static void set_speed_fast(struct ipath_devdata *dd, u32 speed)
+{
+ dd->ipath_ibcddrctrl &= ~(IBA7220_IBC_SPEED_AUTONEG_MASK |
+ IBA7220_IBC_IBTA_1_2_MASK |
+ (IBA7220_IBC_WIDTH_MASK << IBA7220_IBC_WIDTH_SHIFT));
+
+ if (speed == (IPATH_IB_SDR | IPATH_IB_DDR))
+ dd->ipath_ibcddrctrl |= IBA7220_IBC_SPEED_AUTONEG_MASK |
+ IBA7220_IBC_IBTA_1_2_MASK;
+ else
+ dd->ipath_ibcddrctrl |= speed == IPATH_IB_DDR ?
+ IBA7220_IBC_SPEED_DDR : IBA7220_IBC_SPEED_SDR;
+
+ /*
+ * Convert from IB-style 1 = 1x, 2 = 4x, 3 = auto
+ * to chip-centric 0 = 1x, 1 = 4x, 2 = auto
+ */
+ dd->ipath_ibcddrctrl |= (u64)(dd->ipath_link_width_enabled - 1) <<
+ IBA7220_IBC_WIDTH_SHIFT;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcddrctrl,
+ dd->ipath_ibcddrctrl);
+ ipath_cdbg(VERBOSE, "setup for IB speed (%x) done\n", speed);
+}
+
+
+/*
+ * this routine is only used when we are not talking to another
+ * IB 1.2-compliant device that we think can do DDR.
+ * (This includes all existing switch chips as of Oct 2007.)
+ * 1.2-compliant devices go directly to DDR prior to reaching INIT
+ */
+static void try_auto_neg(struct ipath_devdata *dd)
+{
+ /*
+ * required for older non-IB1.2 DDR switches. Newer
+ * non-IB-compliant switches don't need it, but so far,
+ * aren't bothered by it either. "Magic constant"
+ */
+ ipath_write_kreg(dd, IPATH_KREG_OFFSET(IBNCModeCtrl),
+ 0x3b9dc07);
+ dd->ipath_flags |= IPATH_IB_AUTONEG_INPROG;
+ ipath_autoneg_send(dd, 0);
+ set_speed_fast(dd, IPATH_IB_DDR);
+ ipath_toggle_rclkrls(dd);
+ /* 2 msec is minimum length of a poll cycle */
+ schedule_delayed_work(&dd->ipath_autoneg_work,
+ msecs_to_jiffies(2));
+}
+
+
+static int ipath_7220_ib_updown(struct ipath_devdata *dd, int ibup, u64 ibcs)
+{
+ int ret = 0;
+ u32 ltstate = ipath_ib_linkstate(dd, ibcs);
+
+ dd->ipath_link_width_active =
+ ((ibcs >> IBA7220_IBCS_LINKWIDTH_SHIFT) & 1) ?
+ IB_WIDTH_4X : IB_WIDTH_1X;
+ dd->ipath_link_speed_active =
+ ((ibcs >> IBA7220_IBCS_LINKSPEED_SHIFT) & 1) ?
+ IPATH_IB_DDR : IPATH_IB_SDR;
+
+ if (!ibup) {
+ /*
+ * when link goes down we don't want aeq running, so it
+ * won't't interfere with IBC training, etc., and we need
+ * to go back to the static SerDes preset values
+ */
+ if (dd->ipath_x1_fix_tries &&
+ ltstate <= INFINIPATH_IBCS_LT_STATE_SLEEPQUIET &&
+ ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP)
+ dd->ipath_x1_fix_tries = 0;
+ if (!(dd->ipath_flags & (IPATH_IB_AUTONEG_FAILED |
+ IPATH_IB_AUTONEG_INPROG)))
+ set_speed_fast(dd, dd->ipath_link_speed_enabled);
+ if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)) {
+ ipath_cdbg(VERBOSE, "Setting RXEQ defaults\n");
+ ipath_sd7220_presets(dd);
+ }
+ /* this might better in ipath_sd7220_presets() */
+ ipath_set_relock_poll(dd, ibup);
+ } else {
+ if (ipath_compat_ddr_negotiate &&
+ !(dd->ipath_flags & (IPATH_IB_AUTONEG_FAILED |
+ IPATH_IB_AUTONEG_INPROG)) &&
+ dd->ipath_link_speed_active == IPATH_IB_SDR &&
+ (dd->ipath_link_speed_enabled &
+ (IPATH_IB_DDR | IPATH_IB_SDR)) ==
+ (IPATH_IB_DDR | IPATH_IB_SDR) &&
+ dd->ipath_autoneg_tries < IPATH_AUTONEG_TRIES) {
+ /* we are SDR, and DDR auto-negotiation enabled */
+ ++dd->ipath_autoneg_tries;
+ ipath_dbg("DDR negotiation try, %u/%u\n",
+ dd->ipath_autoneg_tries,
+ IPATH_AUTONEG_TRIES);
+ try_auto_neg(dd);
+ ret = 1; /* no other IB status change processing */
+ } else if ((dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)
+ && dd->ipath_link_speed_active == IPATH_IB_SDR) {
+ ipath_autoneg_send(dd, 1);
+ set_speed_fast(dd, IPATH_IB_DDR);
+ udelay(2);
+ ipath_toggle_rclkrls(dd);
+ ret = 1; /* no other IB status change processing */
+ } else {
+ if ((dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) &&
+ (dd->ipath_link_speed_active & IPATH_IB_DDR)) {
+ ipath_dbg("Got to INIT with DDR autoneg\n");
+ dd->ipath_flags &= ~(IPATH_IB_AUTONEG_INPROG
+ | IPATH_IB_AUTONEG_FAILED);
+ dd->ipath_autoneg_tries = 0;
+ /* re-enable SDR, for next link down */
+ set_speed_fast(dd,
+ dd->ipath_link_speed_enabled);
+ wake_up(&dd->ipath_autoneg_wait);
+ } else if (dd->ipath_flags & IPATH_IB_AUTONEG_FAILED) {
+ /*
+ * clear autoneg failure flag, and do setup
+ * so we'll try next time link goes down and
+ * back to INIT (possibly connected to different
+ * device).
+ */
+ ipath_dbg("INIT %sDR after autoneg failure\n",
+ (dd->ipath_link_speed_active &
+ IPATH_IB_DDR) ? "D" : "S");
+ dd->ipath_flags &= ~IPATH_IB_AUTONEG_FAILED;
+ dd->ipath_ibcddrctrl |=
+ IBA7220_IBC_IBTA_1_2_MASK;
+ ipath_write_kreg(dd,
+ IPATH_KREG_OFFSET(IBNCModeCtrl), 0);
+ }
+ }
+ /*
+ * if we are in 1X, and are in autoneg width, it
+ * could be due to an xgxs problem, so if we haven't
+ * already tried, try twice to get to 4X; if we
+ * tried, and couldn't, report it, since it will
+ * probably not be what is desired.
+ */
+ if ((dd->ipath_link_width_enabled & (IB_WIDTH_1X |
+ IB_WIDTH_4X)) == (IB_WIDTH_1X | IB_WIDTH_4X)
+ && dd->ipath_link_width_active == IB_WIDTH_1X
+ && dd->ipath_x1_fix_tries < 3) {
+ if (++dd->ipath_x1_fix_tries == 3)
+ dev_info(&dd->pcidev->dev,
+ "IB link is in 1X mode\n");
+ else {
+ ipath_cdbg(VERBOSE, "IB 1X in "
+ "auto-width, try %u to be "
+ "sure it's really 1X; "
+ "ltstate %u\n",
+ dd->ipath_x1_fix_tries,
+ ltstate);
+ dd->ipath_f_xgxs_reset(dd);
+ ret = 1; /* skip other processing */
+ }
+ }
+
+ if (!ret) {
+ dd->delay_mult = rate_to_delay
+ [(ibcs >> IBA7220_IBCS_LINKSPEED_SHIFT) & 1]
+ [(ibcs >> IBA7220_IBCS_LINKWIDTH_SHIFT) & 1];
+
+ ipath_set_relock_poll(dd, ibup);
+ }
+ }
+
+ if (!ret)
+ ipath_setup_7220_setextled(dd, ipath_ib_linkstate(dd, ibcs),
+ ltstate);
+ return ret;
+}
+
+
+/*
+ * Handle the empirically determined mechanism for auto-negotiation
+ * of DDR speed with switches.
+ */
+static void autoneg_work(struct work_struct *work)
+{
+ struct ipath_devdata *dd;
+ u64 startms;
+ u32 lastlts, i;
+
+ dd = container_of(work, struct ipath_devdata,
+ ipath_autoneg_work.work);
+
+ startms = jiffies_to_msecs(jiffies);
+
+ /*
+ * busy wait for this first part, it should be at most a
+ * few hundred usec, since we scheduled ourselves for 2msec.
+ */
+ for (i = 0; i < 25; i++) {
+ lastlts = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
+ if (lastlts == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
+ ipath_set_linkstate(dd, IPATH_IB_LINKDOWN_DISABLE);
+ break;
+ }
+ udelay(100);
+ }
+
+ if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG))
+ goto done; /* we got there early or told to stop */
+
+ /* we expect this to timeout */
+ if (wait_event_timeout(dd->ipath_autoneg_wait,
+ !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG),
+ msecs_to_jiffies(90)))
+ goto done;
+
+ ipath_toggle_rclkrls(dd);
+
+ /* we expect this to timeout */
+ if (wait_event_timeout(dd->ipath_autoneg_wait,
+ !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG),
+ msecs_to_jiffies(1700)))
+ goto done;
+
+ set_speed_fast(dd, IPATH_IB_SDR);
+ ipath_toggle_rclkrls(dd);
+
+ /*
+ * wait up to 250 msec for link to train and get to INIT at DDR;
+ * this should terminate early
+ */
+ wait_event_timeout(dd->ipath_autoneg_wait,
+ !(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG),
+ msecs_to_jiffies(250));
+done:
+ if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) {
+ ipath_dbg("Did not get to DDR INIT (%x) after %Lu msecs\n",
+ ipath_ib_state(dd, dd->ipath_lastibcstat),
+ jiffies_to_msecs(jiffies)-startms);
+ dd->ipath_flags &= ~IPATH_IB_AUTONEG_INPROG;
+ if (dd->ipath_autoneg_tries == IPATH_AUTONEG_TRIES) {
+ dd->ipath_flags |= IPATH_IB_AUTONEG_FAILED;
+ ipath_dbg("Giving up on DDR until next IB "
+ "link Down\n");
+ dd->ipath_autoneg_tries = 0;
+ }
+ set_speed_fast(dd, dd->ipath_link_speed_enabled);
+ }
+}
+
+
+/**
+ * ipath_init_iba7220_funcs - set up the chip-specific function pointers
+ * @dd: the infinipath device
+ *
+ * This is global, and is called directly at init to set up the
+ * chip-specific function pointers for later use.
+ */
+void ipath_init_iba7220_funcs(struct ipath_devdata *dd)
+{
+ dd->ipath_f_intrsetup = ipath_7220_intconfig;
+ dd->ipath_f_bus = ipath_setup_7220_config;
+ dd->ipath_f_reset = ipath_setup_7220_reset;
+ dd->ipath_f_get_boardname = ipath_7220_boardname;
+ dd->ipath_f_init_hwerrors = ipath_7220_init_hwerrors;
+ dd->ipath_f_early_init = ipath_7220_early_init;
+ dd->ipath_f_handle_hwerrors = ipath_7220_handle_hwerrors;
+ dd->ipath_f_quiet_serdes = ipath_7220_quiet_serdes;
+ dd->ipath_f_bringup_serdes = ipath_7220_bringup_serdes;
+ dd->ipath_f_clear_tids = ipath_7220_clear_tids;
+ dd->ipath_f_put_tid = ipath_7220_put_tid;
+ dd->ipath_f_cleanup = ipath_setup_7220_cleanup;
+ dd->ipath_f_setextled = ipath_setup_7220_setextled;
+ dd->ipath_f_get_base_info = ipath_7220_get_base_info;
+ dd->ipath_f_free_irq = ipath_7220_free_irq;
+ dd->ipath_f_tidtemplate = ipath_7220_tidtemplate;
+ dd->ipath_f_intr_fallback = ipath_7220_intr_fallback;
+ dd->ipath_f_xgxs_reset = ipath_7220_xgxs_reset;
+ dd->ipath_f_get_ib_cfg = ipath_7220_get_ib_cfg;
+ dd->ipath_f_set_ib_cfg = ipath_7220_set_ib_cfg;
+ dd->ipath_f_config_jint = ipath_7220_config_jint;
+ dd->ipath_f_config_ports = ipath_7220_config_ports;
+ dd->ipath_f_read_counters = ipath_7220_read_counters;
+ dd->ipath_f_get_msgheader = ipath_7220_get_msgheader;
+ dd->ipath_f_ib_updown = ipath_7220_ib_updown;
+
+ /* initialize chip-specific variables */
+ ipath_init_7220_variables(dd);
+}
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index 4471674..27dd894 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -155,24 +155,13 @@
dd->ipath_control);
/*
- * Note that prior to try 14 or 15 of IB, the credit scaling
- * wasn't working, because it was swapped for writes with the
- * 1 bit default linkstate field
+ * set initial max size pkt IBC will send, including ICRC; it's the
+ * PIO buffer size in dwords, less 1; also see ipath_set_mtu()
*/
+ val = (dd->ipath_ibmaxlen >> 2) + 1;
+ ibc = val << dd->ibcc_mpl_shift;
- /* ignore pbc and align word */
- val = dd->ipath_piosize2k - 2 * sizeof(u32);
- /*
- * for ICRC, which we only send in diag test pkt mode, and we
- * don't need to worry about that for mtu
- */
- val += 1;
- /*
- * Set the IBC maxpktlength to the size of our pio buffers the
- * maxpktlength is in words. This is *not* the IB data MTU.
- */
- ibc = (val / sizeof(u32)) << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
- /* in KB */
+ /* flowcontrolwatermark is in units of KBytes */
ibc |= 0x5ULL << INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT;
/*
* How often flowctrl sent. More or less in usecs; balance against
@@ -191,10 +180,13 @@
/*
* Want to start out with both LINKCMD and LINKINITCMD in NOP
* (0 and 0). Don't put linkinitcmd in ipath_ibcctrl, want that
- * to stay a NOP
+ * to stay a NOP. Flag that we are disabled, for the (unlikely)
+ * case that some recovery path is trying to bring the link up
+ * before we are ready.
*/
ibc |= INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
INFINIPATH_IBCC_LINKINITCMD_SHIFT;
+ dd->ipath_flags |= IPATH_IB_LINK_DISABLED;
ipath_cdbg(VERBOSE, "Writing 0x%llx to ibcctrl\n",
(unsigned long long) ibc);
ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl, ibc);
@@ -227,17 +219,26 @@
pd->port_cnt = 1;
/* The port 0 pkey table is used by the layer interface. */
pd->port_pkeys[0] = IPATH_DEFAULT_P_KEY;
+ pd->port_seq_cnt = 1;
}
return pd;
}
-static int init_chip_first(struct ipath_devdata *dd,
- struct ipath_portdata **pdp)
+static int init_chip_first(struct ipath_devdata *dd)
{
- struct ipath_portdata *pd = NULL;
+ struct ipath_portdata *pd;
int ret = 0;
u64 val;
+ spin_lock_init(&dd->ipath_kernel_tid_lock);
+ spin_lock_init(&dd->ipath_user_tid_lock);
+ spin_lock_init(&dd->ipath_sendctrl_lock);
+ spin_lock_init(&dd->ipath_sdma_lock);
+ spin_lock_init(&dd->ipath_gpio_lock);
+ spin_lock_init(&dd->ipath_eep_st_lock);
+ spin_lock_init(&dd->ipath_sdepb_lock);
+ mutex_init(&dd->ipath_eep_lock);
+
/*
* skip cfgports stuff because we are not allocating memory,
* and we don't want problems if the portcnt changed due to
@@ -250,12 +251,14 @@
else if (ipath_cfgports <= dd->ipath_portcnt) {
dd->ipath_cfgports = ipath_cfgports;
ipath_dbg("Configured to use %u ports out of %u in chip\n",
- dd->ipath_cfgports, dd->ipath_portcnt);
+ dd->ipath_cfgports, ipath_read_kreg32(dd,
+ dd->ipath_kregs->kr_portcnt));
} else {
dd->ipath_cfgports = dd->ipath_portcnt;
ipath_dbg("Tried to configured to use %u ports; chip "
"only supports %u\n", ipath_cfgports,
- dd->ipath_portcnt);
+ ipath_read_kreg32(dd,
+ dd->ipath_kregs->kr_portcnt));
}
/*
* Allocate full portcnt array, rather than just cfgports, because
@@ -295,12 +298,9 @@
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiosize);
dd->ipath_piosize2k = val & ~0U;
dd->ipath_piosize4k = val >> 32;
- /*
- * Note: the chips support a maximum MTU of 4096, but the driver
- * hasn't implemented this feature yet, so set the initial value
- * to 2048.
- */
- dd->ipath_ibmtu = 2048;
+ if (dd->ipath_piosize4k == 0 && ipath_mtu4096)
+ ipath_mtu4096 = 0; /* 4KB not supported by this chip */
+ dd->ipath_ibmtu = ipath_mtu4096 ? 4096 : 2048;
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendpiobufcnt);
dd->ipath_piobcnt2k = val & ~0U;
dd->ipath_piobcnt4k = val >> 32;
@@ -328,43 +328,46 @@
else ipath_dbg("%u 2k piobufs @ %p\n",
dd->ipath_piobcnt2k, dd->ipath_pio2kbase);
- spin_lock_init(&dd->ipath_tid_lock);
- spin_lock_init(&dd->ipath_sendctrl_lock);
- spin_lock_init(&dd->ipath_gpio_lock);
- spin_lock_init(&dd->ipath_eep_st_lock);
- mutex_init(&dd->ipath_eep_lock);
-
done:
- *pdp = pd;
return ret;
}
/**
* init_chip_reset - re-initialize after a reset, or enable
* @dd: the infinipath device
- * @pdp: output for port data
*
* sanity check at least some of the values after reset, and
* ensure no receive or transmit (explictly, in case reset
* failed
*/
-static int init_chip_reset(struct ipath_devdata *dd,
- struct ipath_portdata **pdp)
+static int init_chip_reset(struct ipath_devdata *dd)
{
u32 rtmp;
+ int i;
+ unsigned long flags;
- *pdp = dd->ipath_pd[0];
- /* ensure chip does no sends or receives while we re-initialize */
- dd->ipath_control = dd->ipath_sendctrl = dd->ipath_rcvctrl = 0U;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl, dd->ipath_rcvctrl);
+ /*
+ * ensure chip does no sends or receives, tail updates, or
+ * pioavail updates while we re-initialize
+ */
+ dd->ipath_rcvctrl &= ~(1ULL << dd->ipath_r_tailupd_shift);
+ for (i = 0; i < dd->ipath_portcnt; i++) {
+ clear_bit(dd->ipath_r_portenable_shift + i,
+ &dd->ipath_rcvctrl);
+ clear_bit(dd->ipath_r_intravail_shift + i,
+ &dd->ipath_rcvctrl);
+ }
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
+ dd->ipath_rcvctrl);
+
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl = 0U; /* no sdma, etc */
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_control, dd->ipath_control);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_portcnt);
- if (dd->ipath_portcnt != rtmp)
- dev_info(&dd->pcidev->dev, "portcnt was %u before "
- "reset, now %u, using original\n",
- dd->ipath_portcnt, rtmp);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_control, 0ULL);
+
rtmp = ipath_read_kreg32(dd, dd->ipath_kregs->kr_rcvtidcnt);
if (rtmp != dd->ipath_rcvtidcnt)
dev_info(&dd->pcidev->dev, "tidcnt was %u before "
@@ -467,10 +470,10 @@
dd->ipath_physshadow = addrs;
}
-static void enable_chip(struct ipath_devdata *dd,
- struct ipath_portdata *pd, int reinit)
+static void enable_chip(struct ipath_devdata *dd, int reinit)
{
u32 val;
+ u64 rcvmask;
unsigned long flags;
int i;
@@ -484,17 +487,28 @@
/* Enable PIO send, and update of PIOavail regs to memory. */
dd->ipath_sendctrl = INFINIPATH_S_PIOENABLE |
INFINIPATH_S_PIOBUFAVAILUPD;
+
+ /*
+ * Set the PIO avail update threshold to host memory
+ * on chips that support it.
+ */
+ if (dd->ipath_pioupd_thresh)
+ dd->ipath_sendctrl |= dd->ipath_pioupd_thresh
+ << INFINIPATH_S_UPDTHRESH_SHIFT;
ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
/*
- * enable port 0 receive, and receive interrupt. other ports
- * done as user opens and inits them.
+ * Enable kernel ports' receive and receive interrupt.
+ * Other ports done as user opens and inits them.
*/
- dd->ipath_rcvctrl = (1ULL << dd->ipath_r_tailupd_shift) |
- (1ULL << dd->ipath_r_portenable_shift) |
- (1ULL << dd->ipath_r_intravail_shift);
+ rcvmask = 1ULL;
+ dd->ipath_rcvctrl |= (rcvmask << dd->ipath_r_portenable_shift) |
+ (rcvmask << dd->ipath_r_intravail_shift);
+ if (!(dd->ipath_flags & IPATH_NODMA_RTAIL))
+ dd->ipath_rcvctrl |= (1ULL << dd->ipath_r_tailupd_shift);
+
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
dd->ipath_rcvctrl);
@@ -505,16 +519,16 @@
dd->ipath_flags |= IPATH_INITTED;
/*
- * init our shadow copies of head from tail values, and write
- * head values to match.
+ * Init our shadow copies of head from tail values,
+ * and write head values to match.
*/
val = ipath_read_ureg32(dd, ur_rcvegrindextail, 0);
- (void)ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
+ ipath_write_ureg(dd, ur_rcvegrindexhead, val, 0);
/* Initialize so we interrupt on next packet received */
- (void)ipath_write_ureg(dd, ur_rcvhdrhead,
- dd->ipath_rhdrhead_intr_off |
- dd->ipath_pd[0]->port_head, 0);
+ ipath_write_ureg(dd, ur_rcvhdrhead,
+ dd->ipath_rhdrhead_intr_off |
+ dd->ipath_pd[0]->port_head, 0);
/*
* by now pioavail updates to memory should have occurred, so
@@ -523,25 +537,26 @@
* initial values of the generation bit correct.
*/
for (i = 0; i < dd->ipath_pioavregs; i++) {
- __le64 val;
+ __le64 pioavail;
/*
* Chip Errata bug 6641; even and odd qwords>3 are swapped.
*/
if (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS))
- val = dd->ipath_pioavailregs_dma[i ^ 1];
+ pioavail = dd->ipath_pioavailregs_dma[i ^ 1];
else
- val = dd->ipath_pioavailregs_dma[i];
- dd->ipath_pioavailshadow[i] = le64_to_cpu(val);
+ pioavail = dd->ipath_pioavailregs_dma[i];
+ dd->ipath_pioavailshadow[i] = le64_to_cpu(pioavail) |
+ (~dd->ipath_pioavailkernel[i] <<
+ INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT);
}
/* can get counters, stats, etc. */
dd->ipath_flags |= IPATH_PRESENT;
}
-static int init_housekeeping(struct ipath_devdata *dd,
- struct ipath_portdata **pdp, int reinit)
+static int init_housekeeping(struct ipath_devdata *dd, int reinit)
{
- char boardn[32];
+ char boardn[40];
int ret = 0;
/*
@@ -600,18 +615,9 @@
ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear,
INFINIPATH_E_RESET);
- if (reinit)
- ret = init_chip_reset(dd, pdp);
- else
- ret = init_chip_first(dd, pdp);
-
- if (ret)
- goto done;
-
- ipath_cdbg(VERBOSE, "Revision %llx (PCI %x), %u ports, %u tids, "
- "%u egrtids\n", (unsigned long long) dd->ipath_revision,
- dd->ipath_pcirev, dd->ipath_portcnt, dd->ipath_rcvtidcnt,
- dd->ipath_rcvegrcnt);
+ ipath_cdbg(VERBOSE, "Revision %llx (PCI %x)\n",
+ (unsigned long long) dd->ipath_revision,
+ dd->ipath_pcirev);
if (((dd->ipath_revision >> INFINIPATH_R_SOFTWARE_SHIFT) &
INFINIPATH_R_SOFTWARE_MASK) != IPATH_CHIP_SWVERSION) {
@@ -650,10 +656,39 @@
ipath_dbg("%s", dd->ipath_boardversion);
+ if (ret)
+ goto done;
+
+ if (reinit)
+ ret = init_chip_reset(dd);
+ else
+ ret = init_chip_first(dd);
+
done:
return ret;
}
+static void verify_interrupt(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
+
+ if (!dd)
+ return; /* being torn down */
+
+ /*
+ * If we don't have any interrupts, let the user know and
+ * don't bother checking again.
+ */
+ if (dd->ipath_int_counter == 0) {
+ if (!dd->ipath_f_intr_fallback(dd))
+ dev_err(&dd->pcidev->dev, "No interrupts detected, "
+ "not usable.\n");
+ else /* re-arm the timer to see if fallback works */
+ mod_timer(&dd->ipath_intrchk_timer, jiffies + HZ/2);
+ } else
+ ipath_cdbg(VERBOSE, "%u interrupts at timer check\n",
+ dd->ipath_int_counter);
+}
/**
* ipath_init_chip - do the actual initialization sequence on the chip
@@ -676,11 +711,11 @@
u32 val32, kpiobufs;
u32 piobufs, uports;
u64 val;
- struct ipath_portdata *pd = NULL; /* keep gcc4 happy */
+ struct ipath_portdata *pd;
gfp_t gfp_flags = GFP_USER | __GFP_COMP;
unsigned long flags;
- ret = init_housekeeping(dd, &pd, reinit);
+ ret = init_housekeeping(dd, reinit);
if (ret)
goto done;
@@ -700,7 +735,7 @@
* we now use routines that backend onto __get_free_pages, the
* rest would be wasted.
*/
- dd->ipath_rcvhdrcnt = dd->ipath_rcvegrcnt;
+ dd->ipath_rcvhdrcnt = max(dd->ipath_p0_rcvegrcnt, dd->ipath_rcvegrcnt);
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrcnt,
dd->ipath_rcvhdrcnt);
@@ -731,8 +766,8 @@
if (kpiobufs + (uports * IPATH_MIN_USER_PORT_BUFCNT) > piobufs) {
int i = (int) piobufs -
(int) (uports * IPATH_MIN_USER_PORT_BUFCNT);
- if (i < 0)
- i = 0;
+ if (i < 1)
+ i = 1;
dev_info(&dd->pcidev->dev, "Allocating %d PIO bufs of "
"%d for kernel leaves too few for %d user ports "
"(%d each); using %u\n", kpiobufs,
@@ -751,24 +786,40 @@
ipath_dbg("allocating %u pbufs/port leaves %u unused, "
"add to kernel\n", dd->ipath_pbufsport, val32);
dd->ipath_lastport_piobuf -= val32;
+ kpiobufs += val32;
ipath_dbg("%u pbufs/port leaves %u unused, add to kernel\n",
dd->ipath_pbufsport, val32);
}
- dd->ipath_lastpioindex = dd->ipath_lastport_piobuf;
+ dd->ipath_lastpioindex = 0;
+ dd->ipath_lastpioindexl = dd->ipath_piobcnt2k;
+ ipath_chg_pioavailkernel(dd, 0, piobufs, 1);
ipath_cdbg(VERBOSE, "%d PIO bufs for kernel out of %d total %u "
"each for %u user ports\n", kpiobufs,
piobufs, dd->ipath_pbufsport, uports);
+ if (dd->ipath_pioupd_thresh) {
+ if (dd->ipath_pbufsport < dd->ipath_pioupd_thresh)
+ dd->ipath_pioupd_thresh = dd->ipath_pbufsport;
+ if (kpiobufs < dd->ipath_pioupd_thresh)
+ dd->ipath_pioupd_thresh = kpiobufs;
+ }
- dd->ipath_f_early_init(dd);
+ ret = dd->ipath_f_early_init(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Early initialization failure\n");
+ goto done;
+ }
+
/*
- * cancel any possible active sends from early driver load.
+ * Cancel any possible active sends from early driver load.
* Follows early_init because some chips have to initialize
* PIO buffers in early_init to avoid false parity errors.
*/
ipath_cancel_sends(dd, 0);
- /* early_init sets rcvhdrentsize and rcvhdrsize, so this must be
- * done after early_init */
+ /*
+ * Early_init sets rcvhdrentsize and rcvhdrsize, so this must be
+ * done after early_init.
+ */
dd->ipath_hdrqlast =
dd->ipath_rcvhdrentsize * (dd->ipath_rcvhdrcnt - 1);
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrentsize,
@@ -783,8 +834,8 @@
goto done;
}
- (void)ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
- dd->ipath_pioavailregs_phys);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendpioavailaddr,
+ dd->ipath_pioavailregs_phys);
/*
* this is to detect s/w errors, which the h/w works around by
* ignoring the low 6 bits of address, if it wasn't aligned.
@@ -843,58 +894,65 @@
/* enable errors that are masked, at least this first time. */
ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
~dd->ipath_maskederrs);
- dd->ipath_errormask = ipath_read_kreg64(dd,
- dd->ipath_kregs->kr_errormask);
+ dd->ipath_maskederrs = 0; /* don't re-enable ignored in timer */
+ dd->ipath_errormask =
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_errormask);
/* clear any interrupts up to this point (ints still not enabled) */
ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);
+ dd->ipath_f_tidtemplate(dd);
+
/*
* Set up the port 0 (kernel) rcvhdr q and egr TIDs. If doing
* re-init, the simplest way to handle this is to free
* existing, and re-allocate.
* Need to re-create rest of port 0 portdata as well.
*/
+ pd = dd->ipath_pd[0];
if (reinit) {
- /* Alloc and init new ipath_portdata for port0,
+ struct ipath_portdata *npd;
+
+ /*
+ * Alloc and init new ipath_portdata for port0,
* Then free old pd. Could lead to fragmentation, but also
* makes later support for hot-swap easier.
*/
- struct ipath_portdata *npd;
npd = create_portdata0(dd);
if (npd) {
ipath_free_pddata(dd, pd);
- dd->ipath_pd[0] = pd = npd;
+ dd->ipath_pd[0] = npd;
+ pd = npd;
} else {
- ipath_dev_err(dd, "Unable to allocate portdata for"
- " port 0, failing\n");
+ ipath_dev_err(dd, "Unable to allocate portdata"
+ " for port 0, failing\n");
ret = -ENOMEM;
goto done;
}
}
- dd->ipath_f_tidtemplate(dd);
ret = ipath_create_rcvhdrq(dd, pd);
- if (!ret) {
- dd->ipath_hdrqtailptr =
- (volatile __le64 *)pd->port_rcvhdrtail_kvaddr;
+ if (!ret)
ret = create_port0_egr(dd);
- }
- if (ret)
- ipath_dev_err(dd, "failed to allocate port 0 (kernel) "
+ if (ret) {
+ ipath_dev_err(dd, "failed to allocate kernel port's "
"rcvhdrq and/or egr bufs\n");
+ goto done;
+ }
else
- enable_chip(dd, pd, reinit);
+ enable_chip(dd, reinit);
-
- if (!ret && !reinit) {
- /* used when we close a port, for DMA already in flight at close */
+ if (!reinit) {
+ /*
+ * Used when we close a port, for DMA already in flight
+ * at close.
+ */
dd->ipath_dummy_hdrq = dma_alloc_coherent(
- &dd->pcidev->dev, pd->port_rcvhdrq_size,
+ &dd->pcidev->dev, dd->ipath_pd[0]->port_rcvhdrq_size,
&dd->ipath_dummy_hdrq_phys,
gfp_flags);
- if (!dd->ipath_dummy_hdrq ) {
+ if (!dd->ipath_dummy_hdrq) {
dev_info(&dd->pcidev->dev,
"Couldn't allocate 0x%lx bytes for dummy hdrq\n",
- pd->port_rcvhdrq_size);
+ dd->ipath_pd[0]->port_rcvhdrq_size);
/* fallback to just 0'ing */
dd->ipath_dummy_hdrq_phys = 0UL;
}
@@ -906,7 +964,7 @@
*/
ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, 0ULL);
- if(!dd->ipath_stats_timer_active) {
+ if (!dd->ipath_stats_timer_active) {
/*
* first init, or after an admin disable/enable
* set up stats retrieval timer, even if we had errors
@@ -922,6 +980,16 @@
dd->ipath_stats_timer_active = 1;
}
+ /* Set up SendDMA if chip supports it */
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ ret = setup_sdma(dd);
+
+ /* Set up HoL state */
+ init_timer(&dd->ipath_hol_timer);
+ dd->ipath_hol_timer.function = ipath_hol_event;
+ dd->ipath_hol_timer.data = (unsigned long)dd;
+ dd->ipath_hol_state = IPATH_HOL_UP;
+
done:
if (!ret) {
*dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
@@ -934,6 +1002,20 @@
0ULL);
/* chip is usable; mark it as initialized */
*dd->ipath_statusp |= IPATH_STATUS_INITTED;
+
+ /*
+ * setup to verify we get an interrupt, and fallback
+ * to an alternate if necessary and possible
+ */
+ if (!reinit) {
+ init_timer(&dd->ipath_intrchk_timer);
+ dd->ipath_intrchk_timer.function =
+ verify_interrupt;
+ dd->ipath_intrchk_timer.data =
+ (unsigned long) dd;
+ }
+ dd->ipath_intrchk_timer.expires = jiffies + HZ/2;
+ add_timer(&dd->ipath_intrchk_timer);
} else
ipath_dev_err(dd, "No interrupts enabled, couldn't "
"setup interrupt address\n");
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 92e58c9..1b58f47 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -32,6 +32,7 @@
*/
#include <linux/pci.h>
+#include <linux/delay.h>
#include "ipath_kernel.h"
#include "ipath_verbs.h"
@@ -59,9 +60,11 @@
dev_info(&dd->pcidev->dev,
"Rewrite PIO buffer %u, to recover from parity error\n",
pnum);
- *pbuf = dwcnt+1; /* no flush required, since already in freeze */
- while(--dwcnt)
- *pbuf++ = 0;
+
+ /* no flush required, since already in freeze */
+ writel(dwcnt + 1, pbuf);
+ while (--dwcnt)
+ writel(0, pbuf++);
}
/*
@@ -70,7 +73,7 @@
* If rewrite is true, and bits are set in the sendbufferror registers,
* we'll write to the buffer, for error recovery on parity errors.
*/
-static void ipath_disarm_senderrbufs(struct ipath_devdata *dd, int rewrite)
+void ipath_disarm_senderrbufs(struct ipath_devdata *dd, int rewrite)
{
u32 piobcnt;
unsigned long sbuf[4];
@@ -84,12 +87,14 @@
dd, dd->ipath_kregs->kr_sendbuffererror);
sbuf[1] = ipath_read_kreg64(
dd, dd->ipath_kregs->kr_sendbuffererror + 1);
- if (piobcnt > 128) {
+ if (piobcnt > 128)
sbuf[2] = ipath_read_kreg64(
dd, dd->ipath_kregs->kr_sendbuffererror + 2);
+ if (piobcnt > 192)
sbuf[3] = ipath_read_kreg64(
dd, dd->ipath_kregs->kr_sendbuffererror + 3);
- }
+ else
+ sbuf[3] = 0;
if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) {
int i;
@@ -254,24 +259,20 @@
}
/* return the strings for the most common link states */
-static char *ib_linkstate(u32 linkstate)
+static char *ib_linkstate(struct ipath_devdata *dd, u64 ibcs)
{
char *ret;
+ u32 state;
- switch (linkstate) {
- case IPATH_IBSTATE_INIT:
+ state = ipath_ib_state(dd, ibcs);
+ if (state == dd->ib_init)
ret = "Init";
- break;
- case IPATH_IBSTATE_ARM:
+ else if (state == dd->ib_arm)
ret = "Arm";
- break;
- case IPATH_IBSTATE_ACTIVE:
+ else if (state == dd->ib_active)
ret = "Active";
- break;
- default:
+ else
ret = "Down";
- }
-
return ret;
}
@@ -286,103 +287,172 @@
}
static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
- ipath_err_t errs, int noprint)
+ ipath_err_t errs)
{
- u64 val;
- u32 ltstate, lstate;
+ u32 ltstate, lstate, ibstate, lastlstate;
+ u32 init = dd->ib_init;
+ u32 arm = dd->ib_arm;
+ u32 active = dd->ib_active;
+ const u64 ibcs = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+
+ lstate = ipath_ib_linkstate(dd, ibcs); /* linkstate */
+ ibstate = ipath_ib_state(dd, ibcs);
+ /* linkstate at last interrupt */
+ lastlstate = ipath_ib_linkstate(dd, dd->ipath_lastibcstat);
+ ltstate = ipath_ib_linktrstate(dd, ibcs); /* linktrainingtate */
/*
- * even if diags are enabled, we want to notice LINKINIT, etc.
- * We just don't want to change the LED state, or
- * dd->ipath_kregs->kr_ibcctrl
+ * Since going into a recovery state causes the link state to go
+ * down and since recovery is transitory, it is better if we "miss"
+ * ever seeing the link training state go into recovery (i.e.,
+ * ignore this transition for link state special handling purposes)
+ * without even updating ipath_lastibcstat.
*/
- val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
- lstate = val & IPATH_IBSTATE_MASK;
+ if ((ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN) ||
+ (ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT) ||
+ (ltstate == INFINIPATH_IBCS_LT_STATE_RECOVERIDLE))
+ goto done;
/*
- * this is confusing enough when it happens that I want to always put it
- * on the console and in the logs. If it was a requested state change,
- * we'll have already cleared the flags, so we won't print this warning
+ * if linkstate transitions into INIT from any of the various down
+ * states, or if it transitions from any of the up (INIT or better)
+ * states into any of the down states (except link recovery), then
+ * call the chip-specific code to take appropriate actions.
*/
- if ((lstate != IPATH_IBSTATE_ARM && lstate != IPATH_IBSTATE_ACTIVE)
- && (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
- dev_info(&dd->pcidev->dev, "Link state changed from %s to %s\n",
- (dd->ipath_flags & IPATH_LINKARMED) ? "ARM" : "ACTIVE",
- ib_linkstate(lstate));
- /*
- * Flush all queued sends when link went to DOWN or INIT,
- * to be sure that they don't block SMA and other MAD packets
- */
- ipath_cancel_sends(dd, 1);
- }
- else if (lstate == IPATH_IBSTATE_INIT || lstate == IPATH_IBSTATE_ARM ||
- lstate == IPATH_IBSTATE_ACTIVE) {
- /*
- * only print at SMA if there is a change, debug if not
- * (sometimes we want to know that, usually not).
- */
- if (lstate == ((unsigned) dd->ipath_lastibcstat
- & IPATH_IBSTATE_MASK)) {
- ipath_dbg("Status change intr but no change (%s)\n",
- ib_linkstate(lstate));
+ if (lstate >= INFINIPATH_IBCS_L_STATE_INIT &&
+ lastlstate == INFINIPATH_IBCS_L_STATE_DOWN) {
+ /* transitioned to UP */
+ if (dd->ipath_f_ib_updown(dd, 1, ibcs)) {
+ /* link came up, so we must no longer be disabled */
+ dd->ipath_flags &= ~IPATH_IB_LINK_DISABLED;
+ ipath_cdbg(LINKVERB, "LinkUp handled, skipped\n");
+ goto skip_ibchange; /* chip-code handled */
}
- else
- ipath_cdbg(VERBOSE, "Unit %u link state %s, last "
- "was %s\n", dd->ipath_unit,
- ib_linkstate(lstate),
- ib_linkstate((unsigned)
- dd->ipath_lastibcstat
- & IPATH_IBSTATE_MASK));
+ } else if ((lastlstate >= INFINIPATH_IBCS_L_STATE_INIT ||
+ (dd->ipath_flags & IPATH_IB_FORCE_NOTIFY)) &&
+ ltstate <= INFINIPATH_IBCS_LT_STATE_CFGWAITRMT &&
+ ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
+ int handled;
+ handled = dd->ipath_f_ib_updown(dd, 0, ibcs);
+ dd->ipath_flags &= ~IPATH_IB_FORCE_NOTIFY;
+ if (handled) {
+ ipath_cdbg(LINKVERB, "LinkDown handled, skipped\n");
+ goto skip_ibchange; /* chip-code handled */
+ }
}
- else {
- lstate = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
- if (lstate == IPATH_IBSTATE_INIT ||
- lstate == IPATH_IBSTATE_ARM ||
- lstate == IPATH_IBSTATE_ACTIVE)
- ipath_cdbg(VERBOSE, "Unit %u link state down"
- " (state 0x%x), from %s\n",
- dd->ipath_unit,
- (u32)val & IPATH_IBSTATE_MASK,
- ib_linkstate(lstate));
- else
- ipath_cdbg(VERBOSE, "Unit %u link state changed "
- "to 0x%x from down (%x)\n",
- dd->ipath_unit, (u32) val, lstate);
+
+ /*
+ * Significant enough to always print and get into logs, if it was
+ * unexpected. If it was a requested state change, we'll have
+ * already cleared the flags, so we won't print this warning
+ */
+ if ((ibstate != arm && ibstate != active) &&
+ (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
+ dev_info(&dd->pcidev->dev, "Link state changed from %s "
+ "to %s\n", (dd->ipath_flags & IPATH_LINKARMED) ?
+ "ARM" : "ACTIVE", ib_linkstate(dd, ibcs));
}
- ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
- lstate = (val >> INFINIPATH_IBCS_LINKSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKSTATE_MASK;
if (ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
ltstate == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
- u32 last_ltstate;
-
+ u32 lastlts;
+ lastlts = ipath_ib_linktrstate(dd, dd->ipath_lastibcstat);
/*
- * Ignore cycling back and forth from Polling.Active
- * to Polling.Quiet while waiting for the other end of
- * the link to come up. We will cycle back and forth
- * between them if no cable is plugged in,
- * the other device is powered off or disabled, etc.
+ * Ignore cycling back and forth from Polling.Active to
+ * Polling.Quiet while waiting for the other end of the link
+ * to come up, except to try and decide if we are connected
+ * to a live IB device or not. We will cycle back and
+ * forth between them if no cable is plugged in, the other
+ * device is powered off or disabled, etc.
*/
- last_ltstate = (dd->ipath_lastibcstat >>
- INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)
- & INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
- if (last_ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE
- || last_ltstate ==
- INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
- if (dd->ipath_ibpollcnt > 40) {
+ if (lastlts == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
+ lastlts == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
+ if (!(dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) &&
+ (++dd->ipath_ibpollcnt == 40)) {
dd->ipath_flags |= IPATH_NOCABLE;
*dd->ipath_statusp |=
IPATH_STATUS_IB_NOCABLE;
- } else
- dd->ipath_ibpollcnt++;
+ ipath_cdbg(LINKVERB, "Set NOCABLE\n");
+ }
+ ipath_cdbg(LINKVERB, "POLL change to %s (%x)\n",
+ ipath_ibcstatus_str[ltstate], ibstate);
goto skip_ibchange;
}
}
- dd->ipath_ibpollcnt = 0; /* some state other than 2 or 3 */
+
+ dd->ipath_ibpollcnt = 0; /* not poll*, now */
ipath_stats.sps_iblink++;
- if (ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
+
+ if (ibstate != init && dd->ipath_lastlinkrecov && ipath_linkrecovery) {
+ u64 linkrecov;
+ linkrecov = ipath_snap_cntr(dd,
+ dd->ipath_cregs->cr_iblinkerrrecovcnt);
+ if (linkrecov != dd->ipath_lastlinkrecov) {
+ ipath_dbg("IB linkrecov up %Lx (%s %s) recov %Lu\n",
+ ibcs, ib_linkstate(dd, ibcs),
+ ipath_ibcstatus_str[ltstate],
+ linkrecov);
+ /* and no more until active again */
+ dd->ipath_lastlinkrecov = 0;
+ ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
+ goto skip_ibchange;
+ }
+ }
+
+ if (ibstate == init || ibstate == arm || ibstate == active) {
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
+ if (ibstate == init || ibstate == arm) {
+ *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
+ if (dd->ipath_flags & IPATH_LINKACTIVE)
+ signal_ib_event(dd, IB_EVENT_PORT_ERR);
+ }
+ if (ibstate == arm) {
+ dd->ipath_flags |= IPATH_LINKARMED;
+ dd->ipath_flags &= ~(IPATH_LINKUNK |
+ IPATH_LINKINIT | IPATH_LINKDOWN |
+ IPATH_LINKACTIVE | IPATH_NOCABLE);
+ ipath_hol_down(dd);
+ } else if (ibstate == init) {
+ /*
+ * set INIT and DOWN. Down is checked by
+ * most of the other code, but INIT is
+ * useful to know in a few places.
+ */
+ dd->ipath_flags |= IPATH_LINKINIT |
+ IPATH_LINKDOWN;
+ dd->ipath_flags &= ~(IPATH_LINKUNK |
+ IPATH_LINKARMED | IPATH_LINKACTIVE |
+ IPATH_NOCABLE);
+ ipath_hol_down(dd);
+ } else { /* active */
+ dd->ipath_lastlinkrecov = ipath_snap_cntr(dd,
+ dd->ipath_cregs->cr_iblinkerrrecovcnt);
+ *dd->ipath_statusp |=
+ IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
+ dd->ipath_flags |= IPATH_LINKACTIVE;
+ dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
+ | IPATH_LINKDOWN | IPATH_LINKARMED |
+ IPATH_NOCABLE);
+ if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ ipath_restart_sdma(dd);
+ signal_ib_event(dd, IB_EVENT_PORT_ACTIVE);
+ /* LED active not handled in chip _f_updown */
+ dd->ipath_f_setextled(dd, lstate, ltstate);
+ ipath_hol_up(dd);
+ }
+
+ /*
+ * print after we've already done the work, so as not to
+ * delay the state changes and notifications, for debugging
+ */
+ if (lstate == lastlstate)
+ ipath_cdbg(LINKVERB, "Unchanged from last: %s "
+ "(%x)\n", ib_linkstate(dd, ibcs), ibstate);
+ else
+ ipath_cdbg(VERBOSE, "Unit %u: link up to %s %s (%x)\n",
+ dd->ipath_unit, ib_linkstate(dd, ibcs),
+ ipath_ibcstatus_str[ltstate], ibstate);
+ } else { /* down */
if (dd->ipath_flags & IPATH_LINKACTIVE)
signal_ib_event(dd, IB_EVENT_PORT_ERR);
dd->ipath_flags |= IPATH_LINKDOWN;
@@ -391,69 +461,28 @@
IPATH_LINKARMED);
*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
dd->ipath_lli_counter = 0;
- if (!noprint) {
- if (((dd->ipath_lastibcstat >>
- INFINIPATH_IBCS_LINKSTATE_SHIFT) &
- INFINIPATH_IBCS_LINKSTATE_MASK)
- == INFINIPATH_IBCS_L_STATE_ACTIVE)
- /* if from up to down be more vocal */
- ipath_cdbg(VERBOSE,
- "Unit %u link now down (%s)\n",
- dd->ipath_unit,
- ipath_ibcstatus_str[ltstate]);
- else
- ipath_cdbg(VERBOSE, "Unit %u link is "
- "down (%s)\n", dd->ipath_unit,
- ipath_ibcstatus_str[ltstate]);
- }
- dd->ipath_f_setextled(dd, lstate, ltstate);
- } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ACTIVE) {
- dd->ipath_flags |= IPATH_LINKACTIVE;
- dd->ipath_flags &=
- ~(IPATH_LINKUNK | IPATH_LINKINIT | IPATH_LINKDOWN |
- IPATH_LINKARMED | IPATH_NOCABLE);
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
- *dd->ipath_statusp |=
- IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
- dd->ipath_f_setextled(dd, lstate, ltstate);
- signal_ib_event(dd, IB_EVENT_PORT_ACTIVE);
- } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_INIT) {
- if (dd->ipath_flags & IPATH_LINKACTIVE)
- signal_ib_event(dd, IB_EVENT_PORT_ERR);
- /*
- * set INIT and DOWN. Down is checked by most of the other
- * code, but INIT is useful to know in a few places.
- */
- dd->ipath_flags |= IPATH_LINKINIT | IPATH_LINKDOWN;
- dd->ipath_flags &=
- ~(IPATH_LINKUNK | IPATH_LINKACTIVE | IPATH_LINKARMED
- | IPATH_NOCABLE);
- *dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
- | IPATH_STATUS_IB_READY);
- dd->ipath_f_setextled(dd, lstate, ltstate);
- } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ARM) {
- if (dd->ipath_flags & IPATH_LINKACTIVE)
- signal_ib_event(dd, IB_EVENT_PORT_ERR);
- dd->ipath_flags |= IPATH_LINKARMED;
- dd->ipath_flags &=
- ~(IPATH_LINKUNK | IPATH_LINKDOWN | IPATH_LINKINIT |
- IPATH_LINKACTIVE | IPATH_NOCABLE);
- *dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
- | IPATH_STATUS_IB_READY);
- dd->ipath_f_setextled(dd, lstate, ltstate);
- } else {
- if (!noprint)
- ipath_dbg("IBstatuschange unit %u: %s (%x)\n",
- dd->ipath_unit,
- ipath_ibcstatus_str[ltstate], ltstate);
+ if (lastlstate != INFINIPATH_IBCS_L_STATE_DOWN)
+ ipath_cdbg(VERBOSE, "Unit %u link state down "
+ "(state 0x%x), from %s\n",
+ dd->ipath_unit, lstate,
+ ib_linkstate(dd, dd->ipath_lastibcstat));
+ else
+ ipath_cdbg(LINKVERB, "Unit %u link state changed "
+ "to %s (0x%x) from down (%x)\n",
+ dd->ipath_unit,
+ ipath_ibcstatus_str[ltstate],
+ ibstate, lastlstate);
}
+
skip_ibchange:
- dd->ipath_lastibcstat = val;
+ dd->ipath_lastibcstat = ibcs;
+done:
+ return;
}
static void handle_supp_msgs(struct ipath_devdata *dd,
- unsigned supp_msgs, char *msg, int msgsz)
+ unsigned supp_msgs, char *msg, u32 msgsz)
{
/*
* Print the message unless it's ibc status change only, which
@@ -461,12 +490,19 @@
*/
if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) {
int iserr;
- iserr = ipath_decode_err(msg, msgsz,
+ ipath_err_t mask;
+ iserr = ipath_decode_err(dd, msg, msgsz,
dd->ipath_lasterror &
~INFINIPATH_E_IBSTATUSCHANGED);
- if (dd->ipath_lasterror &
- ~(INFINIPATH_E_RRCVEGRFULL |
- INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
+
+ mask = INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
+ INFINIPATH_E_PKTERRS | INFINIPATH_E_SDMADISABLED;
+
+ /* if we're in debug, then don't mask SDMADISABLED msgs */
+ if (ipath_debug & __IPATH_DBG)
+ mask &= ~INFINIPATH_E_SDMADISABLED;
+
+ if (dd->ipath_lasterror & ~mask)
ipath_dev_err(dd, "Suppressed %u messages for "
"fast-repeating errors (%s) (%llx)\n",
supp_msgs, msg,
@@ -493,7 +529,7 @@
static unsigned handle_frequent_errors(struct ipath_devdata *dd,
ipath_err_t errs, char *msg,
- int msgsz, int *noprint)
+ u32 msgsz, int *noprint)
{
unsigned long nc;
static unsigned long nextmsg_time;
@@ -523,19 +559,125 @@
return supp_msgs;
}
+static void handle_sdma_errors(struct ipath_devdata *dd, ipath_err_t errs)
+{
+ unsigned long flags;
+ int expected;
+
+ if (ipath_debug & __IPATH_DBG) {
+ char msg[128];
+ ipath_decode_err(dd, msg, sizeof msg, errs &
+ INFINIPATH_E_SDMAERRS);
+ ipath_dbg("errors %lx (%s)\n", (unsigned long)errs, msg);
+ }
+ if (ipath_debug & __IPATH_VERBDBG) {
+ unsigned long tl, hd, status, lengen;
+ tl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmatail);
+ hd = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmahead);
+ status = ipath_read_kreg64(dd
+ , dd->ipath_kregs->kr_senddmastatus);
+ lengen = ipath_read_kreg64(dd,
+ dd->ipath_kregs->kr_senddmalengen);
+ ipath_cdbg(VERBOSE, "sdma tl 0x%lx hd 0x%lx status 0x%lx "
+ "lengen 0x%lx\n", tl, hd, status, lengen);
+ }
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
+ expected = test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (!expected)
+ ipath_cancel_sends(dd, 1);
+}
+
+static void handle_sdma_intr(struct ipath_devdata *dd, u64 istat)
+{
+ unsigned long flags;
+ int expected;
+
+ if ((istat & INFINIPATH_I_SDMAINT) &&
+ !test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ ipath_sdma_intr(dd);
+
+ if (istat & INFINIPATH_I_SDMADISABLED) {
+ expected = test_bit(IPATH_SDMA_ABORTING,
+ &dd->ipath_sdma_status);
+ ipath_dbg("%s SDmaDisabled intr\n",
+ expected ? "expected" : "unexpected");
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (!expected)
+ ipath_cancel_sends(dd, 1);
+ if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
+ }
+}
+
+static int handle_hdrq_full(struct ipath_devdata *dd)
+{
+ int chkerrpkts = 0;
+ u32 hd, tl;
+ u32 i;
+
+ ipath_stats.sps_hdrqfull++;
+ for (i = 0; i < dd->ipath_cfgports; i++) {
+ struct ipath_portdata *pd = dd->ipath_pd[i];
+
+ if (i == 0) {
+ /*
+ * For kernel receive queues, we just want to know
+ * if there are packets in the queue that we can
+ * process.
+ */
+ if (pd->port_head != ipath_get_hdrqtail(pd))
+ chkerrpkts |= 1 << i;
+ continue;
+ }
+
+ /* Skip if user context is not open */
+ if (!pd || !pd->port_cnt)
+ continue;
+
+ /* Don't report the same point multiple times. */
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL)
+ tl = ipath_read_ureg32(dd, ur_rcvhdrtail, i);
+ else
+ tl = ipath_get_rcvhdrtail(pd);
+ if (tl == pd->port_lastrcvhdrqtail)
+ continue;
+
+ hd = ipath_read_ureg32(dd, ur_rcvhdrhead, i);
+ if (hd == (tl + 1) || (!hd && tl == dd->ipath_hdrqlast)) {
+ pd->port_lastrcvhdrqtail = tl;
+ pd->port_hdrqfull++;
+ /* flush hdrqfull so that poll() sees it */
+ wmb();
+ wake_up_interruptible(&pd->port_wait);
+ }
+ }
+
+ return chkerrpkts;
+}
+
static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
{
char msg[128];
u64 ignore_this_time = 0;
- int i, iserr = 0;
+ u64 iserr = 0;
int chkerrpkts = 0, noprint = 0;
unsigned supp_msgs;
int log_idx;
- supp_msgs = handle_frequent_errors(dd, errs, msg, sizeof msg, &noprint);
+ /*
+ * don't report errors that are masked, either at init
+ * (not set in ipath_errormask), or temporarily (set in
+ * ipath_maskederrs)
+ */
+ errs &= dd->ipath_errormask & ~dd->ipath_maskederrs;
- /* don't report errors that are masked */
- errs &= ~dd->ipath_maskederrs;
+ supp_msgs = handle_frequent_errors(dd, errs, msg, (u32)sizeof msg,
+ &noprint);
/* do these first, they are most important */
if (errs & INFINIPATH_E_HARDWARE) {
@@ -550,6 +692,9 @@
}
}
+ if (errs & INFINIPATH_E_SDMAERRS)
+ handle_sdma_errors(dd, errs);
+
if (!noprint && (errs & ~dd->ipath_e_bitsextant))
ipath_dev_err(dd, "error interrupt with unknown errors "
"%llx set\n", (unsigned long long)
@@ -580,18 +725,19 @@
* ones on this particular interrupt, which also isn't great
*/
dd->ipath_maskederrs |= dd->ipath_lasterror | errs;
+
dd->ipath_errormask &= ~dd->ipath_maskederrs;
ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
- s_iserr = ipath_decode_err(msg, sizeof msg,
- dd->ipath_maskederrs);
+ dd->ipath_errormask);
+ s_iserr = ipath_decode_err(dd, msg, sizeof msg,
+ dd->ipath_maskederrs);
if (dd->ipath_maskederrs &
- ~(INFINIPATH_E_RRCVEGRFULL |
- INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
+ ~(INFINIPATH_E_RRCVEGRFULL |
+ INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
ipath_dev_err(dd, "Temporarily disabling "
"error(s) %llx reporting; too frequent (%s)\n",
- (unsigned long long)dd->ipath_maskederrs,
+ (unsigned long long) dd->ipath_maskederrs,
msg);
else {
/*
@@ -633,26 +779,43 @@
INFINIPATH_E_IBSTATUSCHANGED);
}
- /* likely due to cancel, so suppress */
+ if (errs & INFINIPATH_E_SENDSPECIALTRIGGER) {
+ dd->ipath_spectriggerhit++;
+ ipath_dbg("%lu special trigger hits\n",
+ dd->ipath_spectriggerhit);
+ }
+
+ /* likely due to cancel; so suppress message unless verbose */
if ((errs & (INFINIPATH_E_SPKTLEN | INFINIPATH_E_SPIOARMLAUNCH)) &&
dd->ipath_lastcancel > jiffies) {
- ipath_dbg("Suppressed armlaunch/spktlen after error send cancel\n");
+ /* armlaunch takes precedence; it often causes both. */
+ ipath_cdbg(VERBOSE,
+ "Suppressed %s error (%llx) after sendbuf cancel\n",
+ (errs & INFINIPATH_E_SPIOARMLAUNCH) ?
+ "armlaunch" : "sendpktlen", (unsigned long long)errs);
errs &= ~(INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SPKTLEN);
}
if (!errs)
return 0;
- if (!noprint)
+ if (!noprint) {
+ ipath_err_t mask;
/*
- * the ones we mask off are handled specially below or above
+ * The ones we mask off are handled specially below
+ * or above. Also mask SDMADISABLED by default as it
+ * is too chatty.
*/
- ipath_decode_err(msg, sizeof msg,
- errs & ~(INFINIPATH_E_IBSTATUSCHANGED |
- INFINIPATH_E_RRCVEGRFULL |
- INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_HARDWARE));
- else
+ mask = INFINIPATH_E_IBSTATUSCHANGED |
+ INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
+ INFINIPATH_E_HARDWARE | INFINIPATH_E_SDMADISABLED;
+
+ /* if we're in debug, then don't mask SDMADISABLED msgs */
+ if (ipath_debug & __IPATH_DBG)
+ mask &= ~INFINIPATH_E_SDMADISABLED;
+
+ ipath_decode_err(dd, msg, sizeof msg, errs & ~mask);
+ } else
/* so we don't need if (!noprint) at strlcat's below */
*msg = 0;
@@ -677,40 +840,8 @@
* fast_stats, no more than every 5 seconds, user ports get printed
* on close
*/
- if (errs & INFINIPATH_E_RRCVHDRFULL) {
- u32 hd, tl;
- ipath_stats.sps_hdrqfull++;
- for (i = 0; i < dd->ipath_cfgports; i++) {
- struct ipath_portdata *pd = dd->ipath_pd[i];
- if (i == 0) {
- hd = pd->port_head;
- tl = (u32) le64_to_cpu(
- *dd->ipath_hdrqtailptr);
- } else if (pd && pd->port_cnt &&
- pd->port_rcvhdrtail_kvaddr) {
- /*
- * don't report same point multiple times,
- * except kernel
- */
- tl = *(u64 *) pd->port_rcvhdrtail_kvaddr;
- if (tl == pd->port_lastrcvhdrqtail)
- continue;
- hd = ipath_read_ureg32(dd, ur_rcvhdrhead,
- i);
- } else
- continue;
- if (hd == (tl + 1) ||
- (!hd && tl == dd->ipath_hdrqlast)) {
- if (i == 0)
- chkerrpkts = 1;
- pd->port_lastrcvhdrqtail = tl;
- pd->port_hdrqfull++;
- /* flush hdrqfull so that poll() sees it */
- wmb();
- wake_up_interruptible(&pd->port_wait);
- }
- }
- }
+ if (errs & INFINIPATH_E_RRCVHDRFULL)
+ chkerrpkts |= handle_hdrq_full(dd);
if (errs & INFINIPATH_E_RRCVEGRFULL) {
struct ipath_portdata *pd = dd->ipath_pd[0];
@@ -721,9 +852,8 @@
* vs user)
*/
ipath_stats.sps_etidfull++;
- if (pd->port_head !=
- (u32) le64_to_cpu(*dd->ipath_hdrqtailptr))
- chkerrpkts = 1;
+ if (pd->port_head != ipath_get_hdrqtail(pd))
+ chkerrpkts |= 1;
}
/*
@@ -741,16 +871,13 @@
dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
| IPATH_LINKARMED | IPATH_LINKACTIVE);
*dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- if (!noprint) {
- u64 st = ipath_read_kreg64(
- dd, dd->ipath_kregs->kr_ibcstatus);
- ipath_dbg("Lost link, link now down (%s)\n",
- ipath_ibcstatus_str[st & 0xf]);
- }
+ ipath_dbg("Lost link, link now down (%s)\n",
+ ipath_ibcstatus_str[ipath_read_kreg64(dd,
+ dd->ipath_kregs->kr_ibcstatus) & 0xf]);
}
if (errs & INFINIPATH_E_IBSTATUSCHANGED)
- handle_e_ibstatuschanged(dd, errs, noprint);
+ handle_e_ibstatuschanged(dd, errs);
if (errs & INFINIPATH_E_RESET) {
if (!noprint)
@@ -765,9 +892,6 @@
if (!noprint && *msg) {
if (iserr)
ipath_dev_err(dd, "%s error\n", msg);
- else
- dev_info(&dd->pcidev->dev, "%s packet problems\n",
- msg);
}
if (dd->ipath_state_wanted & dd->ipath_flags) {
ipath_cdbg(VERBOSE, "driver wanted state %x, iflags now %x, "
@@ -779,7 +903,6 @@
return chkerrpkts;
}
-
/*
* try to cleanup as much as possible for anything that might have gone
* wrong while in freeze mode, such as pio buffers being written by user
@@ -796,8 +919,7 @@
void ipath_clear_freeze(struct ipath_devdata *dd)
{
int i, im;
- __le64 val;
- unsigned long flags;
+ u64 val;
/* disable error interrupts, to avoid confusion */
ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask, 0ULL);
@@ -816,14 +938,7 @@
dd->ipath_control);
/* ensure pio avail updates continue */
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl & ~INFINIPATH_S_PIOBUFAVAILUPD);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ ipath_force_pio_avail_update(dd);
/*
* We just enabled pioavailupdate, so dma copy is almost certainly
@@ -831,10 +946,13 @@
*/
for (i = 0; i < dd->ipath_pioavregs; i++) {
/* deal with 6110 chip bug */
- im = i > 3 ? i ^ 1 : i;
+ im = (i > 3 && (dd->ipath_flags & IPATH_SWAP_PIOBUFS)) ?
+ i ^ 1 : i;
val = ipath_read_kreg64(dd, (0x1000 / sizeof(u64)) + im);
- dd->ipath_pioavailregs_dma[i] = dd->ipath_pioavailshadow[i]
- = le64_to_cpu(val);
+ dd->ipath_pioavailregs_dma[i] = cpu_to_le64(val);
+ dd->ipath_pioavailshadow[i] = val |
+ (~dd->ipath_pioavailkernel[i] <<
+ INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT);
}
/*
@@ -950,7 +1068,7 @@
* process was waiting for a packet to arrive, and didn't want
* to poll
*/
-static void handle_urcv(struct ipath_devdata *dd, u32 istat)
+static void handle_urcv(struct ipath_devdata *dd, u64 istat)
{
u64 portr;
int i;
@@ -966,12 +1084,13 @@
* and ipath_poll_next()...
*/
rmb();
- portr = ((istat >> INFINIPATH_I_RCVAVAIL_SHIFT) &
- dd->ipath_i_rcvavail_mask)
- | ((istat >> INFINIPATH_I_RCVURG_SHIFT) &
- dd->ipath_i_rcvurg_mask);
+ portr = ((istat >> dd->ipath_i_rcvavail_shift) &
+ dd->ipath_i_rcvavail_mask) |
+ ((istat >> dd->ipath_i_rcvurg_shift) &
+ dd->ipath_i_rcvurg_mask);
for (i = 1; i < dd->ipath_cfgports; i++) {
struct ipath_portdata *pd = dd->ipath_pd[i];
+
if (portr & (1 << i) && pd && pd->port_cnt) {
if (test_and_clear_bit(IPATH_PORT_WAITING_RCV,
&pd->port_flag)) {
@@ -988,7 +1107,7 @@
}
if (rcvdint) {
/* only want to take one interrupt, so turn off the rcv
- * interrupt for all the ports that we did the wakeup on
+ * interrupt for all the ports that we set the rcv_waiting
* (but never for kernel port)
*/
ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
@@ -999,12 +1118,11 @@
irqreturn_t ipath_intr(int irq, void *data)
{
struct ipath_devdata *dd = data;
- u32 istat, chk0rcv = 0;
+ u64 istat, chk0rcv = 0;
ipath_err_t estat = 0;
irqreturn_t ret;
static unsigned unexpected = 0;
- static const u32 port0rbits = (1U<<INFINIPATH_I_RCVAVAIL_SHIFT) |
- (1U<<INFINIPATH_I_RCVURG_SHIFT);
+ u64 kportrbits;
ipath_stats.sps_ints++;
@@ -1053,17 +1171,17 @@
if (unlikely(istat & ~dd->ipath_i_bitsextant))
ipath_dev_err(dd,
- "interrupt with unknown interrupts %x set\n",
- istat & (u32) ~ dd->ipath_i_bitsextant);
- else
- ipath_cdbg(VERBOSE, "intr stat=0x%x\n", istat);
+ "interrupt with unknown interrupts %Lx set\n",
+ istat & ~dd->ipath_i_bitsextant);
+ else if (istat & ~INFINIPATH_I_ERROR) /* errors do own printing */
+ ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n", istat);
- if (unlikely(istat & INFINIPATH_I_ERROR)) {
+ if (istat & INFINIPATH_I_ERROR) {
ipath_stats.sps_errints++;
estat = ipath_read_kreg64(dd,
dd->ipath_kregs->kr_errorstatus);
if (!estat)
- dev_info(&dd->pcidev->dev, "error interrupt (%x), "
+ dev_info(&dd->pcidev->dev, "error interrupt (%Lx), "
"but no error bits set!\n", istat);
else if (estat == -1LL)
/*
@@ -1073,9 +1191,7 @@
ipath_dev_err(dd, "Read of error status failed "
"(all bits set); ignoring\n");
else
- if (handle_errors(dd, estat))
- /* force calling ipath_kreceive() */
- chk0rcv = 1;
+ chk0rcv |= handle_errors(dd, estat);
}
if (istat & INFINIPATH_I_GPIO) {
@@ -1093,8 +1209,7 @@
gpiostatus = ipath_read_kreg32(
dd, dd->ipath_kregs->kr_gpio_status);
- /* First the error-counter case.
- */
+ /* First the error-counter case. */
if ((gpiostatus & IPATH_GPIO_ERRINTR_MASK) &&
(dd->ipath_flags & IPATH_GPIO_ERRINTRS)) {
/* want to clear the bits we see asserted. */
@@ -1156,7 +1271,6 @@
(u64) to_clear);
}
}
- chk0rcv |= istat & port0rbits;
/*
* Clear the interrupt bits we found set, unless they are receive
@@ -1169,22 +1283,25 @@
ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
/*
- * handle port0 receive before checking for pio buffers available,
- * since receives can overflow; piobuf waiters can afford a few
- * extra cycles, since they were waiting anyway, and user's waiting
- * for receive are at the bottom.
+ * Handle kernel receive queues before checking for pio buffers
+ * available since receives can overflow; piobuf waiters can afford
+ * a few extra cycles, since they were waiting anyway, and user's
+ * waiting for receive are at the bottom.
*/
- if (chk0rcv) {
+ kportrbits = (1ULL << dd->ipath_i_rcvavail_shift) |
+ (1ULL << dd->ipath_i_rcvurg_shift);
+ if (chk0rcv || (istat & kportrbits)) {
+ istat &= ~kportrbits;
ipath_kreceive(dd->ipath_pd[0]);
- istat &= ~port0rbits;
}
- if (istat & ((dd->ipath_i_rcvavail_mask <<
- INFINIPATH_I_RCVAVAIL_SHIFT)
- | (dd->ipath_i_rcvurg_mask <<
- INFINIPATH_I_RCVURG_SHIFT)))
+ if (istat & ((dd->ipath_i_rcvavail_mask << dd->ipath_i_rcvavail_shift) |
+ (dd->ipath_i_rcvurg_mask << dd->ipath_i_rcvurg_shift)))
handle_urcv(dd, istat);
+ if (istat & (INFINIPATH_I_SDMAINT | INFINIPATH_I_SDMADISABLED))
+ handle_sdma_intr(dd, istat);
+
if (istat & INFINIPATH_I_SPIOBUFAVAIL) {
unsigned long flags;
@@ -1195,7 +1312,10 @@
ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
- handle_layer_pioavail(dd);
+ if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA))
+ handle_layer_pioavail(dd);
+ else
+ ipath_dbg("unexpected BUFAVAIL intr\n");
}
ret = IRQ_HANDLED;
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index ecf3f7f..5863cbe 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -1,7 +1,7 @@
#ifndef _IPATH_KERNEL_H
#define _IPATH_KERNEL_H
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -42,6 +42,8 @@
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/scatterlist.h>
#include <asm/io.h>
#include <rdma/ib_verbs.h>
@@ -175,9 +177,13 @@
u16 poll_type;
/* port rcvhdrq head offset */
u32 port_head;
+ /* receive packet sequence counter */
+ u32 port_seq_cnt;
};
struct sk_buff;
+struct ipath_sge_state;
+struct ipath_verbs_txreq;
/*
* control information for layered drivers
@@ -191,6 +197,40 @@
dma_addr_t phys;
};
+struct ipath_sdma_txreq {
+ int flags;
+ int sg_count;
+ union {
+ struct scatterlist *sg;
+ void *map_addr;
+ };
+ void (*callback)(void *, int);
+ void *callback_cookie;
+ int callback_status;
+ u16 start_idx; /* sdma private */
+ u16 next_descq_idx; /* sdma private */
+ struct list_head list; /* sdma private */
+};
+
+struct ipath_sdma_desc {
+ __le64 qw[2];
+};
+
+#define IPATH_SDMA_TXREQ_F_USELARGEBUF 0x1
+#define IPATH_SDMA_TXREQ_F_HEADTOHOST 0x2
+#define IPATH_SDMA_TXREQ_F_INTREQ 0x4
+#define IPATH_SDMA_TXREQ_F_FREEBUF 0x8
+#define IPATH_SDMA_TXREQ_F_FREEDESC 0x10
+#define IPATH_SDMA_TXREQ_F_VL15 0x20
+
+#define IPATH_SDMA_TXREQ_S_OK 0
+#define IPATH_SDMA_TXREQ_S_SENDERROR 1
+#define IPATH_SDMA_TXREQ_S_ABORTED 2
+#define IPATH_SDMA_TXREQ_S_SHUTDOWN 3
+
+/* max dwords in small buffer packet */
+#define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2)
+
/*
* Possible IB config parameters for ipath_f_get/set_ib_cfg()
*/
@@ -221,11 +261,6 @@
unsigned long ipath_physaddr;
/* base of memory alloced for ipath_kregbase, for free */
u64 *ipath_kregalloc;
- /*
- * virtual address where port0 rcvhdrqtail updated for this unit.
- * only written to by the chip, not the driver.
- */
- volatile __le64 *ipath_hdrqtailptr;
/* ipath_cfgports pointers */
struct ipath_portdata **ipath_pd;
/* sk_buffs used by port 0 eager receive queue */
@@ -283,6 +318,7 @@
/* per chip actions needed for IB Link up/down changes */
int (*ipath_f_ib_updown)(struct ipath_devdata *, int, u64);
+ unsigned ipath_lastegr_idx;
struct ipath_ibdev *verbs_dev;
struct timer_list verbs_timer;
/* total dwords sent (summed from counter) */
@@ -309,6 +345,7 @@
ipath_err_t ipath_lasthwerror;
/* errors masked because they occur too fast */
ipath_err_t ipath_maskederrs;
+ u64 ipath_lastlinkrecov; /* link recoveries at last ACTIVE */
/* time in jiffies at which to re-enable maskederrs */
unsigned long ipath_unmasktime;
/* count of egrfull errors, combined for all ports */
@@ -347,6 +384,7 @@
u32 ipath_lastrpkts;
/* pio bufs allocated per port */
u32 ipath_pbufsport;
+ u32 ipath_pioupd_thresh; /* update threshold, some chips */
/*
* number of ports configured as max; zero is set to number chip
* supports, less gives more pio bufs/port, etc.
@@ -365,6 +403,7 @@
* get to multiple devices
*/
u32 ipath_lastpioindex;
+ u32 ipath_lastpioindexl;
/* max length of freezemsg */
u32 ipath_freezelen;
/*
@@ -381,6 +420,15 @@
u32 ipath_pcibar0;
/* so we can rewrite it after a chip reset */
u32 ipath_pcibar1;
+ u32 ipath_x1_fix_tries;
+ u32 ipath_autoneg_tries;
+ u32 serdes_first_init_done;
+
+ struct ipath_relock {
+ atomic_t ipath_relock_timer_active;
+ struct timer_list ipath_relock_timer;
+ unsigned int ipath_relock_interval; /* in jiffies */
+ } ipath_relock_singleton;
/* interrupt number */
int ipath_irq;
@@ -403,7 +451,7 @@
u64 __iomem *ipath_egrtidbase;
/* lock to workaround chip bug 9437 and others */
spinlock_t ipath_kernel_tid_lock;
- spinlock_t ipath_tid_lock;
+ spinlock_t ipath_user_tid_lock;
spinlock_t ipath_sendctrl_lock;
/*
@@ -422,11 +470,48 @@
struct class_device *diag_class_dev;
/* timer used to prevent stats overflow, error throttling, etc. */
struct timer_list ipath_stats_timer;
+ /* timer to verify interrupts work, and fallback if possible */
+ struct timer_list ipath_intrchk_timer;
void *ipath_dummy_hdrq; /* used after port close */
dma_addr_t ipath_dummy_hdrq_phys;
+ /* SendDMA related entries */
+ spinlock_t ipath_sdma_lock;
+ u64 ipath_sdma_status;
+ unsigned long ipath_sdma_abort_jiffies;
+ unsigned long ipath_sdma_abort_intr_timeout;
+ unsigned long ipath_sdma_buf_jiffies;
+ struct ipath_sdma_desc *ipath_sdma_descq;
+ u64 ipath_sdma_descq_added;
+ u64 ipath_sdma_descq_removed;
+ int ipath_sdma_desc_nreserved;
+ u16 ipath_sdma_descq_cnt;
+ u16 ipath_sdma_descq_tail;
+ u16 ipath_sdma_descq_head;
+ u16 ipath_sdma_next_intr;
+ u16 ipath_sdma_reset_wait;
+ u8 ipath_sdma_generation;
+ struct tasklet_struct ipath_sdma_abort_task;
+ struct tasklet_struct ipath_sdma_notify_task;
+ struct list_head ipath_sdma_activelist;
+ struct list_head ipath_sdma_notifylist;
+ atomic_t ipath_sdma_vl15_count;
+ struct timer_list ipath_sdma_vl15_timer;
+
+ dma_addr_t ipath_sdma_descq_phys;
+ volatile __le64 *ipath_sdma_head_dma;
+ dma_addr_t ipath_sdma_head_phys;
+
unsigned long ipath_ureg_align; /* user register alignment */
+ struct delayed_work ipath_autoneg_work;
+ wait_queue_head_t ipath_autoneg_wait;
+
+ /* HoL blocking / user app forward-progress state */
+ unsigned ipath_hol_state;
+ unsigned ipath_hol_next;
+ struct timer_list ipath_hol_timer;
+
/*
* Shadow copies of registers; size indicates read access size.
* Most of them are readonly, but some are write-only register,
@@ -447,6 +532,8 @@
* init time.
*/
unsigned long ipath_pioavailshadow[8];
+ /* bitmap of send buffers available for the kernel to use with PIO. */
+ unsigned long ipath_pioavailkernel[8];
/* shadow of kr_gpio_out, for rmw ops */
u64 ipath_gpio_out;
/* shadow the gpio mask register */
@@ -472,6 +559,8 @@
u64 ipath_intconfig;
/* kr_sendpiobufbase value */
u64 ipath_piobufbase;
+ /* kr_ibcddrctrl shadow */
+ u64 ipath_ibcddrctrl;
/* these are the "32 bit" regs */
@@ -488,7 +577,10 @@
unsigned long ipath_rcvctrl;
/* shadow kr_sendctrl */
unsigned long ipath_sendctrl;
- unsigned long ipath_lastcancel; /* to not count armlaunch after cancel */
+ /* to not count armlaunch after cancel */
+ unsigned long ipath_lastcancel;
+ /* count cases where special trigger was needed (double write) */
+ unsigned long ipath_spectriggerhit;
/* value we put in kr_rcvhdrcnt */
u32 ipath_rcvhdrcnt;
@@ -510,6 +602,7 @@
u32 ipath_piobcnt4k;
/* size in bytes of "4KB" PIO buffers */
u32 ipath_piosize4k;
+ u32 ipath_pioreserved; /* reserved special-inkernel; */
/* kr_rcvegrbase value */
u32 ipath_rcvegrbase;
/* kr_rcvegrcnt value */
@@ -546,10 +639,10 @@
u32 ipath_init_ibmaxlen;
/* size of each rcvegrbuffer */
u32 ipath_rcvegrbufsize;
- /* width (2,4,8,16,32) from HT config reg */
- u32 ipath_htwidth;
- /* HT speed (200,400,800,1000) from HT config */
- u32 ipath_htspeed;
+ /* localbus width (1, 2,4,8,16,32) from config space */
+ u32 ipath_lbus_width;
+ /* localbus speed (HT: 200,400,800,1000; PCIe 2500) */
+ u32 ipath_lbus_speed;
/*
* number of sequential ibcstatus change for polling active/quiet
* (i.e., link not coming up).
@@ -573,21 +666,14 @@
*/
u8 ipath_serial[16];
/* human readable board version */
- u8 ipath_boardversion[80];
+ u8 ipath_boardversion[96];
+ u8 ipath_lbus_info[32]; /* human readable localbus info */
/* chip major rev, from ipath_revision */
u8 ipath_majrev;
/* chip minor rev, from ipath_revision */
u8 ipath_minrev;
/* board rev, from ipath_revision */
u8 ipath_boardrev;
-
- u8 ipath_r_portenable_shift;
- u8 ipath_r_intravail_shift;
- u8 ipath_r_tailupd_shift;
- u8 ipath_r_portcfg_shift;
-
- /* unit # of this chip, if present */
- int ipath_unit;
/* saved for restore after reset */
u8 ipath_pci_cacheline;
/* LID mask control */
@@ -603,6 +689,14 @@
/* Rx Polarity inversion (compensate for ~tx on partner) */
u8 ipath_rx_pol_inv;
+ u8 ipath_r_portenable_shift;
+ u8 ipath_r_intravail_shift;
+ u8 ipath_r_tailupd_shift;
+ u8 ipath_r_portcfg_shift;
+
+ /* unit # of this chip, if present */
+ int ipath_unit;
+
/* local link integrity counter */
u32 ipath_lli_counter;
/* local link integrity errors */
@@ -617,9 +711,6 @@
u32 ipath_overrun_thresh_errs;
u32 ipath_lli_errs;
- /* status check work */
- struct delayed_work status_work;
-
/*
* Not all devices managed by a driver instance are the same
* type, so these fields must be per-device.
@@ -632,8 +723,8 @@
* Below should be computable from number of ports,
* since they are never modified.
*/
- u32 ipath_i_rcvavail_mask;
- u32 ipath_i_rcvurg_mask;
+ u64 ipath_i_rcvavail_mask;
+ u64 ipath_i_rcvurg_mask;
u16 ipath_i_rcvurg_shift;
u16 ipath_i_rcvavail_shift;
@@ -641,8 +732,9 @@
* Register bits for selecting i2c direction and values, used for
* I2C serial flash.
*/
- u16 ipath_gpio_sda_num;
- u16 ipath_gpio_scl_num;
+ u8 ipath_gpio_sda_num;
+ u8 ipath_gpio_scl_num;
+ u8 ipath_i2c_chain_type;
u64 ipath_gpio_sda;
u64 ipath_gpio_scl;
@@ -703,13 +795,51 @@
/* interrupt mitigation reload register info */
u16 ipath_jint_idle_ticks; /* idle clock ticks */
u16 ipath_jint_max_packets; /* max packets across all ports */
+
+ /*
+ * lock for access to SerDes, and flags to sequence preset
+ * versus steady-state. 7220-only at the moment.
+ */
+ spinlock_t ipath_sdepb_lock;
+ u8 ipath_presets_needed; /* Set if presets to be restored next DOWN */
};
+/* ipath_hol_state values (stopping/starting user proc, send flushing) */
+#define IPATH_HOL_UP 0
+#define IPATH_HOL_DOWN 1
+/* ipath_hol_next toggle values, used when hol_state IPATH_HOL_DOWN */
+#define IPATH_HOL_DOWNSTOP 0
+#define IPATH_HOL_DOWNCONT 1
+
+/* bit positions for sdma_status */
+#define IPATH_SDMA_ABORTING 0
+#define IPATH_SDMA_DISARMED 1
+#define IPATH_SDMA_DISABLED 2
+#define IPATH_SDMA_LAYERBUF 3
+#define IPATH_SDMA_RUNNING 62
+#define IPATH_SDMA_SHUTDOWN 63
+
+/* bit combinations that correspond to abort states */
+#define IPATH_SDMA_ABORT_NONE 0
+#define IPATH_SDMA_ABORT_ABORTING (1UL << IPATH_SDMA_ABORTING)
+#define IPATH_SDMA_ABORT_DISARMED ((1UL << IPATH_SDMA_ABORTING) | \
+ (1UL << IPATH_SDMA_DISARMED))
+#define IPATH_SDMA_ABORT_DISABLED ((1UL << IPATH_SDMA_ABORTING) | \
+ (1UL << IPATH_SDMA_DISABLED))
+#define IPATH_SDMA_ABORT_ABORTED ((1UL << IPATH_SDMA_ABORTING) | \
+ (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
+#define IPATH_SDMA_ABORT_MASK ((1UL<<IPATH_SDMA_ABORTING) | \
+ (1UL << IPATH_SDMA_DISARMED) | (1UL << IPATH_SDMA_DISABLED))
+
+#define IPATH_SDMA_BUF_NONE 0
+#define IPATH_SDMA_BUF_MASK (1UL<<IPATH_SDMA_LAYERBUF)
+
/* Private data for file operations */
struct ipath_filedata {
struct ipath_portdata *pd;
unsigned subport;
unsigned tidcursor;
+ struct ipath_user_sdma_queue *pq;
};
extern struct list_head ipath_dev_list;
extern spinlock_t ipath_devs_lock;
@@ -718,7 +848,7 @@
int ipath_init_chip(struct ipath_devdata *, int);
int ipath_enable_wc(struct ipath_devdata *dd);
void ipath_disable_wc(struct ipath_devdata *dd);
-int ipath_count_units(int *npresentp, int *nupp, u32 *maxportsp);
+int ipath_count_units(int *npresentp, int *nupp, int *maxportsp);
void ipath_shutdown_device(struct ipath_devdata *);
void ipath_clear_freeze(struct ipath_devdata *);
@@ -741,7 +871,8 @@
extern int ipath_diag_inuse;
irqreturn_t ipath_intr(int irq, void *devid);
-int ipath_decode_err(char *buf, size_t blen, ipath_err_t err);
+int ipath_decode_err(struct ipath_devdata *dd, char *buf, size_t blen,
+ ipath_err_t err);
#if __IPATH_INFO || __IPATH_DBG
extern const char *ipath_ibcstatus_str[];
#endif
@@ -774,6 +905,13 @@
int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv);
void ipath_enable_armlaunch(struct ipath_devdata *);
void ipath_disable_armlaunch(struct ipath_devdata *);
+void ipath_hol_down(struct ipath_devdata *);
+void ipath_hol_up(struct ipath_devdata *);
+void ipath_hol_event(unsigned long);
+void ipath_toggle_rclkrls(struct ipath_devdata *);
+void ipath_sd7220_clr_ibpar(struct ipath_devdata *);
+void ipath_set_relock_poll(struct ipath_devdata *, int);
+void ipath_shutdown_relock_poll(struct ipath_devdata *);
/* for use in system calls, where we want to know device type, etc. */
#define port_fp(fp) ((struct ipath_filedata *)(fp)->private_data)->pd
@@ -781,11 +919,15 @@
((struct ipath_filedata *)(fp)->private_data)->subport
#define tidcursor_fp(fp) \
((struct ipath_filedata *)(fp)->private_data)->tidcursor
+#define user_sdma_queue_fp(fp) \
+ ((struct ipath_filedata *)(fp)->private_data)->pq
/*
* values for ipath_flags
*/
-/* The chip is up and initted */
+ /* chip can report link latency (IB 1.2) */
+#define IPATH_HAS_LINK_LATENCY 0x1
+ /* The chip is up and initted */
#define IPATH_INITTED 0x2
/* set if any user code has set kr_rcvhdrsize */
#define IPATH_RCVHDRSZ_SET 0x4
@@ -809,6 +951,8 @@
#define IPATH_LINKUNK 0x400
/* Write combining flush needed for PIO */
#define IPATH_PIO_FLUSH_WC 0x1000
+ /* DMA Receive tail pointer */
+#define IPATH_NODMA_RTAIL 0x2000
/* no IB cable, or no device on IB cable */
#define IPATH_NOCABLE 0x4000
/* Supports port zero per packet receive interrupts via
@@ -819,16 +963,26 @@
/* packet/word counters are 32 bit, else those 4 counters
* are 64bit */
#define IPATH_32BITCOUNTERS 0x20000
- /* can miss port0 rx interrupts */
/* Interrupt register is 64 bits */
#define IPATH_INTREG_64 0x40000
+ /* can miss port0 rx interrupts */
#define IPATH_DISABLED 0x80000 /* administratively disabled */
/* Use GPIO interrupts for new counters */
#define IPATH_GPIO_ERRINTRS 0x100000
#define IPATH_SWAP_PIOBUFS 0x200000
+ /* Supports Send DMA */
+#define IPATH_HAS_SEND_DMA 0x400000
+ /* Supports Send Count (not just word count) in PBC */
+#define IPATH_HAS_PBC_CNT 0x800000
/* Suppress heartbeat, even if turning off loopback */
#define IPATH_NO_HRTBT 0x1000000
+#define IPATH_HAS_THRESH_UPDATE 0x4000000
#define IPATH_HAS_MULT_IB_SPEED 0x8000000
+#define IPATH_IB_AUTONEG_INPROG 0x10000000
+#define IPATH_IB_AUTONEG_FAILED 0x20000000
+ /* Linkdown-disable intentionally, Do not attempt to bring up */
+#define IPATH_IB_LINK_DISABLED 0x40000000
+#define IPATH_IB_FORCE_NOTIFY 0x80000000 /* force notify on next ib change */
/* Bits in GPIO for the added interrupts */
#define IPATH_GPIO_PORT0_BIT 2
@@ -847,13 +1001,18 @@
/* free up any allocated data at closes */
void ipath_free_data(struct ipath_portdata *dd);
-u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32 *);
+u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32, u32 *);
+void ipath_chg_pioavailkernel(struct ipath_devdata *dd, unsigned start,
+ unsigned len, int avail);
+void ipath_init_iba7220_funcs(struct ipath_devdata *);
void ipath_init_iba6120_funcs(struct ipath_devdata *);
void ipath_init_iba6110_funcs(struct ipath_devdata *);
void ipath_get_eeprom_info(struct ipath_devdata *);
int ipath_update_eeprom_log(struct ipath_devdata *dd);
void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr);
u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
+void ipath_disarm_senderrbufs(struct ipath_devdata *, int);
+void ipath_force_pio_avail_update(struct ipath_devdata *);
void signal_ib_event(struct ipath_devdata *dd, enum ib_event_type ev);
/*
@@ -865,6 +1024,34 @@
#define IPATH_LED_LOG 2 /* Logical (link) YELLOW LED */
void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val);
+/* send dma routines */
+int setup_sdma(struct ipath_devdata *);
+void teardown_sdma(struct ipath_devdata *);
+void ipath_restart_sdma(struct ipath_devdata *);
+void ipath_sdma_intr(struct ipath_devdata *);
+int ipath_sdma_verbs_send(struct ipath_devdata *, struct ipath_sge_state *,
+ u32, struct ipath_verbs_txreq *);
+/* ipath_sdma_lock should be locked before calling this. */
+int ipath_sdma_make_progress(struct ipath_devdata *dd);
+
+/* must be called under ipath_sdma_lock */
+static inline u16 ipath_sdma_descq_freecnt(const struct ipath_devdata *dd)
+{
+ return dd->ipath_sdma_descq_cnt -
+ (dd->ipath_sdma_descq_added - dd->ipath_sdma_descq_removed) -
+ 1 - dd->ipath_sdma_desc_nreserved;
+}
+
+static inline void ipath_sdma_desc_reserve(struct ipath_devdata *dd, u16 cnt)
+{
+ dd->ipath_sdma_desc_nreserved += cnt;
+}
+
+static inline void ipath_sdma_desc_unreserve(struct ipath_devdata *dd, u16 cnt)
+{
+ dd->ipath_sdma_desc_nreserved -= cnt;
+}
+
/*
* number of words used for protocol header if not set by ipath_userinit();
*/
@@ -875,6 +1062,8 @@
void ipath_release_user_pages_on_close(struct page **, size_t);
int ipath_eeprom_read(struct ipath_devdata *, u8, void *, int);
int ipath_eeprom_write(struct ipath_devdata *, u8, const void *, int);
+int ipath_tempsense_read(struct ipath_devdata *, u8 regnum);
+int ipath_tempsense_write(struct ipath_devdata *, u8 regnum, u8 data);
/* these are used for the registers that vary with port */
void ipath_write_kreg_port(const struct ipath_devdata *, ipath_kreg,
@@ -891,8 +1080,7 @@
/*
* At the moment, none of the s-registers are writable, so no
- * ipath_write_sreg(), and none of the c-registers are writable, so no
- * ipath_write_creg().
+ * ipath_write_sreg().
*/
/**
@@ -1001,6 +1189,27 @@
pd->port_rcvhdrtail_kvaddr));
}
+static inline u32 ipath_get_hdrqtail(const struct ipath_portdata *pd)
+{
+ const struct ipath_devdata *dd = pd->port_dd;
+ u32 hdrqtail;
+
+ if (dd->ipath_flags & IPATH_NODMA_RTAIL) {
+ __le32 *rhf_addr;
+ u32 seq;
+
+ rhf_addr = (__le32 *) pd->port_rcvhdrq +
+ pd->port_head + dd->ipath_rhf_offset;
+ seq = ipath_hdrget_seq(rhf_addr);
+ hdrqtail = pd->port_head;
+ if (seq == pd->port_seq_cnt)
+ hdrqtail++;
+ } else
+ hdrqtail = ipath_get_rcvhdrtail(pd);
+
+ return hdrqtail;
+}
+
static inline u64 ipath_read_ireg(const struct ipath_devdata *dd, ipath_kreg r)
{
return (dd->ipath_flags & IPATH_INTREG_64) ?
@@ -1029,6 +1238,21 @@
}
/*
+ * from contents of IBCStatus (or a saved copy), return logical link state
+ * combination of link state and linktraining state (down, active, init,
+ * arm, etc.
+ */
+static inline u32 ipath_ib_state(struct ipath_devdata *dd, u64 ibcs)
+{
+ u32 ibs;
+ ibs = (u32)(ibcs >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
+ dd->ibcs_lts_mask;
+ ibs |= (u32)(ibcs &
+ (INFINIPATH_IBCS_LINKSTATE_MASK << dd->ibcs_ls_shift));
+ return ibs;
+}
+
+/*
* sysfs interface.
*/
@@ -1053,6 +1277,7 @@
dma_addr_t ipath_map_page(struct pci_dev *, struct page *, unsigned long,
size_t, int);
dma_addr_t ipath_map_single(struct pci_dev *, void *, size_t, int);
+const char *ipath_get_unit_name(int unit);
/*
* Flush write combining store buffers (if present) and perform a write
@@ -1065,11 +1290,8 @@
#endif
extern unsigned ipath_debug; /* debugging bit mask */
-
-#define IPATH_MAX_PARITY_ATTEMPTS 10000 /* max times to try recovery */
-
-const char *ipath_get_unit_name(int unit);
-
+extern unsigned ipath_linkrecovery;
+extern unsigned ipath_mtu4096;
extern struct mutex ipath_mutex;
#define IPATH_DRV_NAME "ib_ipath"
@@ -1096,7 +1318,7 @@
# define __IPATH_DBG_WHICH(which,fmt,...) \
do { \
- if(unlikely(ipath_debug&(which))) \
+ if (unlikely(ipath_debug & (which))) \
printk(KERN_DEBUG IPATH_DRV_NAME ": %s: " fmt, \
__func__,##__VA_ARGS__); \
} while(0)
diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c
index b34b91d..1ff46ae 100644
--- a/drivers/infiniband/hw/ipath/ipath_mad.c
+++ b/drivers/infiniband/hw/ipath/ipath_mad.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -146,6 +146,15 @@
return reply(smp);
}
+static void set_link_width_enabled(struct ipath_devdata *dd, u32 w)
+{
+ (void) dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_LWID_ENB, w);
+}
+
+static void set_link_speed_enabled(struct ipath_devdata *dd, u32 s)
+{
+ (void) dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_SPD_ENB, s);
+}
static int get_overrunthreshold(struct ipath_devdata *dd)
{
@@ -226,6 +235,7 @@
struct ib_device *ibdev, u8 port)
{
struct ipath_ibdev *dev;
+ struct ipath_devdata *dd;
struct ib_port_info *pip = (struct ib_port_info *)smp->data;
u16 lid;
u8 ibcstat;
@@ -239,6 +249,7 @@
}
dev = to_idev(ibdev);
+ dd = dev->dd;
/* Clear all fields. Only set the non-zero fields. */
memset(smp->data, 0, sizeof(smp->data));
@@ -248,25 +259,28 @@
dev->mkeyprot == 0)
pip->mkey = dev->mkey;
pip->gid_prefix = dev->gid_prefix;
- lid = dev->dd->ipath_lid;
+ lid = dd->ipath_lid;
pip->lid = lid ? cpu_to_be16(lid) : IB_LID_PERMISSIVE;
pip->sm_lid = cpu_to_be16(dev->sm_lid);
pip->cap_mask = cpu_to_be32(dev->port_cap_flags);
/* pip->diag_code; */
pip->mkey_lease_period = cpu_to_be16(dev->mkey_lease_period);
pip->local_port_num = port;
- pip->link_width_enabled = dev->link_width_enabled;
- pip->link_width_supported = 3; /* 1x or 4x */
- pip->link_width_active = 2; /* 4x */
- pip->linkspeed_portstate = 0x10; /* 2.5Gbps */
- ibcstat = dev->dd->ipath_lastibcstat;
- pip->linkspeed_portstate |= ((ibcstat >> 4) & 0x3) + 1;
+ pip->link_width_enabled = dd->ipath_link_width_enabled;
+ pip->link_width_supported = dd->ipath_link_width_supported;
+ pip->link_width_active = dd->ipath_link_width_active;
+ pip->linkspeed_portstate = dd->ipath_link_speed_supported << 4;
+ ibcstat = dd->ipath_lastibcstat;
+ /* map LinkState to IB portinfo values. */
+ pip->linkspeed_portstate |= ipath_ib_linkstate(dd, ibcstat) + 1;
+
pip->portphysstate_linkdown =
- (ipath_cvt_physportstate[ibcstat & 0xf] << 4) |
- (get_linkdowndefaultstate(dev->dd) ? 1 : 2);
- pip->mkeyprot_resv_lmc = (dev->mkeyprot << 6) | dev->dd->ipath_lmc;
- pip->linkspeedactive_enabled = 0x11; /* 2.5Gbps, 2.5Gbps */
- switch (dev->dd->ipath_ibmtu) {
+ (ipath_cvt_physportstate[ibcstat & dd->ibcs_lts_mask] << 4) |
+ (get_linkdowndefaultstate(dd) ? 1 : 2);
+ pip->mkeyprot_resv_lmc = (dev->mkeyprot << 6) | dd->ipath_lmc;
+ pip->linkspeedactive_enabled = (dd->ipath_link_speed_active << 4) |
+ dd->ipath_link_speed_enabled;
+ switch (dd->ipath_ibmtu) {
case 4096:
mtu = IB_MTU_4096;
break;
@@ -292,19 +306,15 @@
/* pip->vl_arb_high_cap; // only one VL */
/* pip->vl_arb_low_cap; // only one VL */
/* InitTypeReply = 0 */
- /*
- * Note: the chips support a maximum MTU of 4096, but the driver
- * hasn't implemented this feature yet, so set the maximum value
- * to 2048.
- */
- pip->inittypereply_mtucap = IB_MTU_2048;
- // HCAs ignore VLStallCount and HOQLife
+ /* our mtu cap depends on whether 4K MTU enabled or not */
+ pip->inittypereply_mtucap = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048;
+ /* HCAs ignore VLStallCount and HOQLife */
/* pip->vlstallcnt_hoqlife; */
pip->operationalvl_pei_peo_fpi_fpo = 0x10; /* OVLs = 1 */
pip->mkey_violations = cpu_to_be16(dev->mkey_violations);
/* P_KeyViolations are counted by hardware. */
pip->pkey_violations =
- cpu_to_be16((ipath_get_cr_errpkey(dev->dd) -
+ cpu_to_be16((ipath_get_cr_errpkey(dd) -
dev->z_pkey_violations) & 0xFFFF);
pip->qkey_violations = cpu_to_be16(dev->qkey_violations);
/* Only the hardware GUID is supported for now */
@@ -313,10 +323,17 @@
/* 32.768 usec. response time (guessing) */
pip->resv_resptimevalue = 3;
pip->localphyerrors_overrunerrors =
- (get_phyerrthreshold(dev->dd) << 4) |
- get_overrunthreshold(dev->dd);
+ (get_phyerrthreshold(dd) << 4) |
+ get_overrunthreshold(dd);
/* pip->max_credit_hint; */
- /* pip->link_roundtrip_latency[3]; */
+ if (dev->port_cap_flags & IB_PORT_LINK_LATENCY_SUP) {
+ u32 v;
+
+ v = dd->ipath_f_get_ib_cfg(dd, IPATH_IB_CFG_LINKLATENCY);
+ pip->link_roundtrip_latency[0] = v >> 16;
+ pip->link_roundtrip_latency[1] = v >> 8;
+ pip->link_roundtrip_latency[2] = v;
+ }
ret = reply(smp);
@@ -444,19 +461,25 @@
ib_dispatch_event(&event);
}
- /* Only 4x supported but allow 1x or 4x to be set (see 14.2.6.6). */
+ /* Allow 1x or 4x to be set (see 14.2.6.6). */
lwe = pip->link_width_enabled;
- if ((lwe >= 4 && lwe <= 8) || (lwe >= 0xC && lwe <= 0xFE))
- goto err;
- if (lwe == 0xFF)
- dev->link_width_enabled = 3; /* 1x or 4x */
- else if (lwe)
- dev->link_width_enabled = lwe;
+ if (lwe) {
+ if (lwe == 0xFF)
+ lwe = dd->ipath_link_width_supported;
+ else if (lwe >= 16 || (lwe & ~dd->ipath_link_width_supported))
+ goto err;
+ set_link_width_enabled(dd, lwe);
+ }
- /* Only 2.5 Gbs supported. */
+ /* Allow 2.5 or 5.0 Gbs. */
lse = pip->linkspeedactive_enabled & 0xF;
- if (lse >= 2 && lse <= 0xE)
- goto err;
+ if (lse) {
+ if (lse == 15)
+ lse = dd->ipath_link_speed_supported;
+ else if (lse >= 8 || (lse & ~dd->ipath_link_speed_supported))
+ goto err;
+ set_link_speed_enabled(dd, lse);
+ }
/* Set link down default state. */
switch (pip->portphysstate_linkdown & 0xF) {
@@ -491,6 +514,8 @@
mtu = 2048;
break;
case IB_MTU_4096:
+ if (!ipath_mtu4096)
+ goto err;
mtu = 4096;
break;
default:
@@ -565,6 +590,10 @@
else
goto err;
ipath_set_linkstate(dd, lstate);
+ if (lstate == IPATH_IB_LINKDOWN_DISABLE) {
+ ret = IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED;
+ goto done;
+ }
ipath_wait_linkstate(dd, IPATH_LINKINIT | IPATH_LINKARMED |
IPATH_LINKACTIVE, 1000);
break;
@@ -948,10 +977,14 @@
* nsec. 0 == 4 nsec., 1 == 8 nsec., ..., 255 == 1020 nsec. Sample
* intervals are counted in ticks. Since we use Linux timers, that
* count in jiffies, we can't sample for less than 1000 ticks if HZ
- * == 1000 (4000 ticks if HZ is 250).
+ * == 1000 (4000 ticks if HZ is 250). link_speed_active returns 2 for
+ * DDR, 1 for SDR, set the tick to 1 for DDR, 0 for SDR on chips that
+ * have hardware support for delaying packets.
*/
- /* XXX This is WRONG. */
- p->tick = 250; /* 1 usec. */
+ if (crp->cr_psstat)
+ p->tick = dev->dd->ipath_link_speed_active - 1;
+ else
+ p->tick = 250; /* 1 usec. */
p->counter_width = 4; /* 32 bit counters */
p->counter_mask0_9 = COUNTER_MASK0_9;
spin_lock_irqsave(&dev->pending_lock, flags);
@@ -1364,7 +1397,8 @@
}
/* Is the mkey in the process of expiring? */
- if (dev->mkey_lease_timeout && jiffies >= dev->mkey_lease_timeout) {
+ if (dev->mkey_lease_timeout &&
+ time_after_eq(jiffies, dev->mkey_lease_timeout)) {
/* Clear timeout and mkey protection field. */
dev->mkey_lease_timeout = 0;
dev->mkeyprot = 0;
diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c
index 087ed31..dd5b6e9 100644
--- a/drivers/infiniband/hw/ipath/ipath_qp.c
+++ b/drivers/infiniband/hw/ipath/ipath_qp.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -340,6 +340,7 @@
qp->s_flags &= IPATH_S_SIGNAL_REQ_WR;
qp->s_hdrwords = 0;
qp->s_wqe = NULL;
+ qp->s_pkt_delay = 0;
qp->s_psn = 0;
qp->r_psn = 0;
qp->r_msn = 0;
@@ -392,7 +393,6 @@
qp->ibqp.qp_num, qp->remote_qpn, err);
spin_lock(&dev->pending_lock);
- /* XXX What if its already removed by the timeout code? */
if (!list_empty(&qp->timerwait))
list_del_init(&qp->timerwait);
if (!list_empty(&qp->piowait))
@@ -516,13 +516,13 @@
goto inval;
/*
- * Note: the chips support a maximum MTU of 4096, but the driver
- * hasn't implemented this feature yet, so don't allow Path MTU
- * values greater than 2048.
+ * don't allow invalid Path MTU values or greater than 2048
+ * unless we are configured for a 4KB MTU
*/
- if (attr_mask & IB_QP_PATH_MTU)
- if (attr->path_mtu > IB_MTU_2048)
- goto inval;
+ if ((attr_mask & IB_QP_PATH_MTU) &&
+ (ib_mtu_enum_to_int(attr->path_mtu) == -1 ||
+ (attr->path_mtu > IB_MTU_2048 && !ipath_mtu4096)))
+ goto inval;
if (attr_mask & IB_QP_PATH_MIG_STATE)
if (attr->path_mig_state != IB_MIG_MIGRATED &&
@@ -564,8 +564,10 @@
if (attr_mask & IB_QP_ACCESS_FLAGS)
qp->qp_access_flags = attr->qp_access_flags;
- if (attr_mask & IB_QP_AV)
+ if (attr_mask & IB_QP_AV) {
qp->remote_ah_attr = attr->ah_attr;
+ qp->s_dmult = ipath_ib_rate_to_mult(attr->ah_attr.static_rate);
+ }
if (attr_mask & IB_QP_PATH_MTU)
qp->path_mtu = attr->path_mtu;
@@ -748,22 +750,33 @@
size_t sz;
struct ib_qp *ret;
- if (init_attr->cap.max_send_sge > ib_ipath_max_sges ||
- init_attr->cap.max_recv_sge > ib_ipath_max_sges ||
- init_attr->cap.max_send_wr > ib_ipath_max_qp_wrs ||
- init_attr->cap.max_recv_wr > ib_ipath_max_qp_wrs) {
- ret = ERR_PTR(-ENOMEM);
+ if (init_attr->create_flags) {
+ ret = ERR_PTR(-EINVAL);
goto bail;
}
- if (init_attr->cap.max_send_sge +
- init_attr->cap.max_recv_sge +
- init_attr->cap.max_send_wr +
- init_attr->cap.max_recv_wr == 0) {
+ if (init_attr->cap.max_send_sge > ib_ipath_max_sges ||
+ init_attr->cap.max_send_wr > ib_ipath_max_qp_wrs) {
ret = ERR_PTR(-EINVAL);
goto bail;
}
+ /* Check receive queue parameters if no SRQ is specified. */
+ if (!init_attr->srq) {
+ if (init_attr->cap.max_recv_sge > ib_ipath_max_sges ||
+ init_attr->cap.max_recv_wr > ib_ipath_max_qp_wrs) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+ if (init_attr->cap.max_send_sge +
+ init_attr->cap.max_send_wr +
+ init_attr->cap.max_recv_sge +
+ init_attr->cap.max_recv_wr == 0) {
+ ret = ERR_PTR(-EINVAL);
+ goto bail;
+ }
+ }
+
switch (init_attr->qp_type) {
case IB_QPT_UC:
case IB_QPT_RC:
@@ -840,6 +853,7 @@
goto bail_qp;
}
qp->ip = NULL;
+ qp->s_tx = NULL;
ipath_reset_qp(qp, init_attr->qp_type);
break;
@@ -945,12 +959,20 @@
/* Stop the sending tasklet. */
tasklet_kill(&qp->s_task);
+ if (qp->s_tx) {
+ atomic_dec(&qp->refcount);
+ if (qp->s_tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF)
+ kfree(qp->s_tx->txreq.map_addr);
+ }
+
/* Make sure the QP isn't on the timeout list. */
spin_lock_irqsave(&dev->pending_lock, flags);
if (!list_empty(&qp->timerwait))
list_del_init(&qp->timerwait);
if (!list_empty(&qp->piowait))
list_del_init(&qp->piowait);
+ if (qp->s_tx)
+ list_add(&qp->s_tx->txreq.list, &dev->txreq_free);
spin_unlock_irqrestore(&dev->pending_lock, flags);
/*
@@ -1021,7 +1043,6 @@
qp->ibqp.qp_num, qp->remote_qpn, wc->status);
spin_lock(&dev->pending_lock);
- /* XXX What if its already removed by the timeout code? */
if (!list_empty(&qp->timerwait))
list_del_init(&qp->timerwait);
if (!list_empty(&qp->piowait))
diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c
index 40f3e37..c405dfb 100644
--- a/drivers/infiniband/hw/ipath/ipath_rc.c
+++ b/drivers/infiniband/hw/ipath/ipath_rc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -31,6 +31,8 @@
* SOFTWARE.
*/
+#include <linux/io.h>
+
#include "ipath_verbs.h"
#include "ipath_kernel.h"
@@ -306,7 +308,7 @@
else {
qp->s_state = OP(SEND_ONLY_WITH_IMMEDIATE);
/* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.imm_data;
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
}
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
@@ -344,7 +346,7 @@
qp->s_state =
OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE);
/* Immediate data comes after RETH */
- ohdr->u.rc.imm_data = wqe->wr.imm_data;
+ ohdr->u.rc.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
bth0 |= 1 << 23;
@@ -488,7 +490,7 @@
else {
qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE);
/* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.imm_data;
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
}
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
@@ -524,7 +526,7 @@
else {
qp->s_state = OP(RDMA_WRITE_LAST_WITH_IMMEDIATE);
/* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.imm_data;
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
bth0 |= 1 << 23;
@@ -585,19 +587,39 @@
static void send_rc_ack(struct ipath_qp *qp)
{
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ struct ipath_devdata *dd;
u16 lrh0;
u32 bth0;
u32 hwords;
+ u32 __iomem *piobuf;
struct ipath_ib_header hdr;
struct ipath_other_headers *ohdr;
unsigned long flags;
+ spin_lock_irqsave(&qp->s_lock, flags);
+
/* Don't send ACK or NAK if a RDMA read or atomic is pending. */
if (qp->r_head_ack_queue != qp->s_tail_ack_queue ||
(qp->s_flags & IPATH_S_ACK_PENDING) ||
qp->s_ack_state != OP(ACKNOWLEDGE))
goto queue_ack;
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+ dd = dev->dd;
+ piobuf = ipath_getpiobuf(dd, 0, NULL);
+ if (!piobuf) {
+ /*
+ * We are out of PIO buffers at the moment.
+ * Pass responsibility for sending the ACK to the
+ * send tasklet so that when a PIO buffer becomes
+ * available, the ACK is sent ahead of other outgoing
+ * packets.
+ */
+ spin_lock_irqsave(&qp->s_lock, flags);
+ goto queue_ack;
+ }
+
/* Construct the header. */
ohdr = &hdr.u.oth;
lrh0 = IPATH_LRH_BTH;
@@ -611,7 +633,7 @@
lrh0 = IPATH_LRH_GRH;
}
/* read pkey_index w/o lock (its atomic) */
- bth0 = ipath_get_pkey(dev->dd, qp->s_pkey_index) |
+ bth0 = ipath_get_pkey(dd, qp->s_pkey_index) |
(OP(ACKNOWLEDGE) << 24) | (1 << 22);
if (qp->r_nak_state)
ohdr->u.aeth = cpu_to_be32((qp->r_msn & IPATH_MSN_MASK) |
@@ -623,30 +645,29 @@
hdr.lrh[0] = cpu_to_be16(lrh0);
hdr.lrh[1] = cpu_to_be16(qp->remote_ah_attr.dlid);
hdr.lrh[2] = cpu_to_be16(hwords + SIZE_OF_CRC);
- hdr.lrh[3] = cpu_to_be16(dev->dd->ipath_lid);
+ hdr.lrh[3] = cpu_to_be16(dd->ipath_lid);
ohdr->bth[0] = cpu_to_be32(bth0);
ohdr->bth[1] = cpu_to_be32(qp->remote_qpn);
ohdr->bth[2] = cpu_to_be32(qp->r_ack_psn & IPATH_PSN_MASK);
- /*
- * If we can send the ACK, clear the ACK state.
- */
- if (ipath_verbs_send(qp, &hdr, hwords, NULL, 0) == 0) {
- dev->n_unicast_xmit++;
- goto done;
- }
+ writeq(hwords + 1, piobuf);
- /*
- * We are out of PIO buffers at the moment.
- * Pass responsibility for sending the ACK to the
- * send tasklet so that when a PIO buffer becomes
- * available, the ACK is sent ahead of other outgoing
- * packets.
- */
- dev->n_rc_qacks++;
+ if (dd->ipath_flags & IPATH_PIO_FLUSH_WC) {
+ u32 *hdrp = (u32 *) &hdr;
+
+ ipath_flush_wc();
+ __iowrite32_copy(piobuf + 2, hdrp, hwords - 1);
+ ipath_flush_wc();
+ __raw_writel(hdrp[hwords - 1], piobuf + hwords + 1);
+ } else
+ __iowrite32_copy(piobuf + 2, (u32 *) &hdr, hwords);
+
+ ipath_flush_wc();
+
+ dev->n_unicast_xmit++;
+ goto done;
queue_ack:
- spin_lock_irqsave(&qp->s_lock, flags);
dev->n_rc_qacks++;
qp->s_flags |= IPATH_S_ACK_PENDING;
qp->s_nak_state = qp->r_nak_state;
diff --git a/drivers/infiniband/hw/ipath/ipath_registers.h b/drivers/infiniband/hw/ipath/ipath_registers.h
index 92ad73a..8f44d0c 100644
--- a/drivers/infiniband/hw/ipath/ipath_registers.h
+++ b/drivers/infiniband/hw/ipath/ipath_registers.h
@@ -63,67 +63,92 @@
/* kr_control bits */
#define INFINIPATH_C_FREEZEMODE 0x00000002
#define INFINIPATH_C_LINKENABLE 0x00000004
-#define INFINIPATH_C_RESET 0x00000001
/* kr_sendctrl bits */
#define INFINIPATH_S_DISARMPIOBUF_SHIFT 16
+#define INFINIPATH_S_UPDTHRESH_SHIFT 24
+#define INFINIPATH_S_UPDTHRESH_MASK 0x1f
#define IPATH_S_ABORT 0
#define IPATH_S_PIOINTBUFAVAIL 1
#define IPATH_S_PIOBUFAVAILUPD 2
#define IPATH_S_PIOENABLE 3
+#define IPATH_S_SDMAINTENABLE 9
+#define IPATH_S_SDMASINGLEDESCRIPTOR 10
+#define IPATH_S_SDMAENABLE 11
+#define IPATH_S_SDMAHALT 12
#define IPATH_S_DISARM 31
#define INFINIPATH_S_ABORT (1U << IPATH_S_ABORT)
#define INFINIPATH_S_PIOINTBUFAVAIL (1U << IPATH_S_PIOINTBUFAVAIL)
#define INFINIPATH_S_PIOBUFAVAILUPD (1U << IPATH_S_PIOBUFAVAILUPD)
#define INFINIPATH_S_PIOENABLE (1U << IPATH_S_PIOENABLE)
+#define INFINIPATH_S_SDMAINTENABLE (1U << IPATH_S_SDMAINTENABLE)
+#define INFINIPATH_S_SDMASINGLEDESCRIPTOR \
+ (1U << IPATH_S_SDMASINGLEDESCRIPTOR)
+#define INFINIPATH_S_SDMAENABLE (1U << IPATH_S_SDMAENABLE)
+#define INFINIPATH_S_SDMAHALT (1U << IPATH_S_SDMAHALT)
#define INFINIPATH_S_DISARM (1U << IPATH_S_DISARM)
-/* kr_rcvctrl bits */
+/* kr_rcvctrl bits that are the same on multiple chips */
#define INFINIPATH_R_PORTENABLE_SHIFT 0
#define INFINIPATH_R_QPMAP_ENABLE (1ULL << 38)
/* kr_intstatus, kr_intclear, kr_intmask bits */
-#define INFINIPATH_I_RCVURG_SHIFT 0
-#define INFINIPATH_I_RCVAVAIL_SHIFT 12
-#define INFINIPATH_I_ERROR 0x80000000
-#define INFINIPATH_I_SPIOSENT 0x40000000
-#define INFINIPATH_I_SPIOBUFAVAIL 0x20000000
-#define INFINIPATH_I_GPIO 0x10000000
+#define INFINIPATH_I_SDMAINT 0x8000000000000000ULL
+#define INFINIPATH_I_SDMADISABLED 0x4000000000000000ULL
+#define INFINIPATH_I_ERROR 0x0000000080000000ULL
+#define INFINIPATH_I_SPIOSENT 0x0000000040000000ULL
+#define INFINIPATH_I_SPIOBUFAVAIL 0x0000000020000000ULL
+#define INFINIPATH_I_GPIO 0x0000000010000000ULL
+#define INFINIPATH_I_JINT 0x0000000004000000ULL
/* kr_errorstatus, kr_errorclear, kr_errormask bits */
-#define INFINIPATH_E_RFORMATERR 0x0000000000000001ULL
-#define INFINIPATH_E_RVCRC 0x0000000000000002ULL
-#define INFINIPATH_E_RICRC 0x0000000000000004ULL
-#define INFINIPATH_E_RMINPKTLEN 0x0000000000000008ULL
-#define INFINIPATH_E_RMAXPKTLEN 0x0000000000000010ULL
-#define INFINIPATH_E_RLONGPKTLEN 0x0000000000000020ULL
-#define INFINIPATH_E_RSHORTPKTLEN 0x0000000000000040ULL
-#define INFINIPATH_E_RUNEXPCHAR 0x0000000000000080ULL
-#define INFINIPATH_E_RUNSUPVL 0x0000000000000100ULL
-#define INFINIPATH_E_REBP 0x0000000000000200ULL
-#define INFINIPATH_E_RIBFLOW 0x0000000000000400ULL
-#define INFINIPATH_E_RBADVERSION 0x0000000000000800ULL
-#define INFINIPATH_E_RRCVEGRFULL 0x0000000000001000ULL
-#define INFINIPATH_E_RRCVHDRFULL 0x0000000000002000ULL
-#define INFINIPATH_E_RBADTID 0x0000000000004000ULL
-#define INFINIPATH_E_RHDRLEN 0x0000000000008000ULL
-#define INFINIPATH_E_RHDR 0x0000000000010000ULL
-#define INFINIPATH_E_RIBLOSTLINK 0x0000000000020000ULL
-#define INFINIPATH_E_SMINPKTLEN 0x0000000020000000ULL
-#define INFINIPATH_E_SMAXPKTLEN 0x0000000040000000ULL
-#define INFINIPATH_E_SUNDERRUN 0x0000000080000000ULL
-#define INFINIPATH_E_SPKTLEN 0x0000000100000000ULL
-#define INFINIPATH_E_SDROPPEDSMPPKT 0x0000000200000000ULL
-#define INFINIPATH_E_SDROPPEDDATAPKT 0x0000000400000000ULL
-#define INFINIPATH_E_SPIOARMLAUNCH 0x0000000800000000ULL
-#define INFINIPATH_E_SUNEXPERRPKTNUM 0x0000001000000000ULL
-#define INFINIPATH_E_SUNSUPVL 0x0000002000000000ULL
-#define INFINIPATH_E_IBSTATUSCHANGED 0x0001000000000000ULL
-#define INFINIPATH_E_INVALIDADDR 0x0002000000000000ULL
-#define INFINIPATH_E_RESET 0x0004000000000000ULL
-#define INFINIPATH_E_HARDWARE 0x0008000000000000ULL
+#define INFINIPATH_E_RFORMATERR 0x0000000000000001ULL
+#define INFINIPATH_E_RVCRC 0x0000000000000002ULL
+#define INFINIPATH_E_RICRC 0x0000000000000004ULL
+#define INFINIPATH_E_RMINPKTLEN 0x0000000000000008ULL
+#define INFINIPATH_E_RMAXPKTLEN 0x0000000000000010ULL
+#define INFINIPATH_E_RLONGPKTLEN 0x0000000000000020ULL
+#define INFINIPATH_E_RSHORTPKTLEN 0x0000000000000040ULL
+#define INFINIPATH_E_RUNEXPCHAR 0x0000000000000080ULL
+#define INFINIPATH_E_RUNSUPVL 0x0000000000000100ULL
+#define INFINIPATH_E_REBP 0x0000000000000200ULL
+#define INFINIPATH_E_RIBFLOW 0x0000000000000400ULL
+#define INFINIPATH_E_RBADVERSION 0x0000000000000800ULL
+#define INFINIPATH_E_RRCVEGRFULL 0x0000000000001000ULL
+#define INFINIPATH_E_RRCVHDRFULL 0x0000000000002000ULL
+#define INFINIPATH_E_RBADTID 0x0000000000004000ULL
+#define INFINIPATH_E_RHDRLEN 0x0000000000008000ULL
+#define INFINIPATH_E_RHDR 0x0000000000010000ULL
+#define INFINIPATH_E_RIBLOSTLINK 0x0000000000020000ULL
+#define INFINIPATH_E_SENDSPECIALTRIGGER 0x0000000008000000ULL
+#define INFINIPATH_E_SDMADISABLED 0x0000000010000000ULL
+#define INFINIPATH_E_SMINPKTLEN 0x0000000020000000ULL
+#define INFINIPATH_E_SMAXPKTLEN 0x0000000040000000ULL
+#define INFINIPATH_E_SUNDERRUN 0x0000000080000000ULL
+#define INFINIPATH_E_SPKTLEN 0x0000000100000000ULL
+#define INFINIPATH_E_SDROPPEDSMPPKT 0x0000000200000000ULL
+#define INFINIPATH_E_SDROPPEDDATAPKT 0x0000000400000000ULL
+#define INFINIPATH_E_SPIOARMLAUNCH 0x0000000800000000ULL
+#define INFINIPATH_E_SUNEXPERRPKTNUM 0x0000001000000000ULL
+#define INFINIPATH_E_SUNSUPVL 0x0000002000000000ULL
+#define INFINIPATH_E_SENDBUFMISUSE 0x0000004000000000ULL
+#define INFINIPATH_E_SDMAGENMISMATCH 0x0000008000000000ULL
+#define INFINIPATH_E_SDMAOUTOFBOUND 0x0000010000000000ULL
+#define INFINIPATH_E_SDMATAILOUTOFBOUND 0x0000020000000000ULL
+#define INFINIPATH_E_SDMABASE 0x0000040000000000ULL
+#define INFINIPATH_E_SDMA1STDESC 0x0000080000000000ULL
+#define INFINIPATH_E_SDMARPYTAG 0x0000100000000000ULL
+#define INFINIPATH_E_SDMADWEN 0x0000200000000000ULL
+#define INFINIPATH_E_SDMAMISSINGDW 0x0000400000000000ULL
+#define INFINIPATH_E_SDMAUNEXPDATA 0x0000800000000000ULL
+#define INFINIPATH_E_IBSTATUSCHANGED 0x0001000000000000ULL
+#define INFINIPATH_E_INVALIDADDR 0x0002000000000000ULL
+#define INFINIPATH_E_RESET 0x0004000000000000ULL
+#define INFINIPATH_E_HARDWARE 0x0008000000000000ULL
+#define INFINIPATH_E_SDMADESCADDRMISALIGN 0x0010000000000000ULL
+#define INFINIPATH_E_INVALIDEEPCMD 0x0020000000000000ULL
/*
* this is used to print "common" packet errors only when the
@@ -134,6 +159,17 @@
| INFINIPATH_E_RICRC | INFINIPATH_E_RSHORTPKTLEN \
| INFINIPATH_E_REBP )
+/* Convenience for decoding Send DMA errors */
+#define INFINIPATH_E_SDMAERRS ( \
+ INFINIPATH_E_SDMAGENMISMATCH | INFINIPATH_E_SDMAOUTOFBOUND | \
+ INFINIPATH_E_SDMATAILOUTOFBOUND | INFINIPATH_E_SDMABASE | \
+ INFINIPATH_E_SDMA1STDESC | INFINIPATH_E_SDMARPYTAG | \
+ INFINIPATH_E_SDMADWEN | INFINIPATH_E_SDMAMISSINGDW | \
+ INFINIPATH_E_SDMAUNEXPDATA | \
+ INFINIPATH_E_SDMADESCADDRMISALIGN | \
+ INFINIPATH_E_SDMADISABLED | \
+ INFINIPATH_E_SENDBUFMISUSE)
+
/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
/* TXEMEMPARITYERR bit 0: PIObuf, 1: PIOpbc, 2: launchfifo
* RXEMEMPARITYERR bit 0: rcvbuf, 1: lookupq, 2: expTID, 3: eagerTID
@@ -158,7 +194,7 @@
#define INFINIPATH_HWE_RXEMEMPARITYERR_HDRINFO 0x40ULL
/* waldo specific -- find the rest in ipath_6110.c */
#define INFINIPATH_HWE_RXDSYNCMEMPARITYERR 0x0000000400000000ULL
-/* monty specific -- find the rest in ipath_6120.c */
+/* 6120/7220 specific -- find the rest in ipath_6120.c and ipath_7220.c */
#define INFINIPATH_HWE_MEMBISTFAILED 0x0040000000000000ULL
/* kr_hwdiagctrl bits */
@@ -185,8 +221,8 @@
#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3
#define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
#define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
-#define INFINIPATH_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */
-#define INFINIPATH_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
+#define INFINIPATH_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */
+#define INFINIPATH_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
#define INFINIPATH_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
#define INFINIPATH_IBCC_LINKCMD_SHIFT 18
#define INFINIPATH_IBCC_MAXPKTLEN_MASK 0x7FFULL
@@ -201,10 +237,9 @@
#define INFINIPATH_IBCC_LINKDOWNDEFAULTSTATE 0x4000000000000000ULL
/* kr_ibcstatus bits */
-#define INFINIPATH_IBCS_LINKTRAININGSTATE_MASK 0xF
#define INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT 0
#define INFINIPATH_IBCS_LINKSTATE_MASK 0x7
-#define INFINIPATH_IBCS_LINKSTATE_SHIFT 4
+
#define INFINIPATH_IBCS_TXREADY 0x40000000
#define INFINIPATH_IBCS_TXCREDITOK 0x80000000
/* link training states (shift by
@@ -222,30 +257,13 @@
#define INFINIPATH_IBCS_LT_STATE_RECOVERRETRAIN 0x0c
#define INFINIPATH_IBCS_LT_STATE_RECOVERWAITRMT 0x0e
#define INFINIPATH_IBCS_LT_STATE_RECOVERIDLE 0x0f
-/* link state machine states (shift by INFINIPATH_IBCS_LINKSTATE_SHIFT) */
+/* link state machine states (shift by ibcs_ls_shift) */
#define INFINIPATH_IBCS_L_STATE_DOWN 0x0
#define INFINIPATH_IBCS_L_STATE_INIT 0x1
#define INFINIPATH_IBCS_L_STATE_ARM 0x2
#define INFINIPATH_IBCS_L_STATE_ACTIVE 0x3
#define INFINIPATH_IBCS_L_STATE_ACT_DEFER 0x4
-/* combination link status states that we use with some frequency */
-#define IPATH_IBSTATE_MASK ((INFINIPATH_IBCS_LINKTRAININGSTATE_MASK \
- << INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) | \
- (INFINIPATH_IBCS_LINKSTATE_MASK \
- <<INFINIPATH_IBCS_LINKSTATE_SHIFT))
-#define IPATH_IBSTATE_INIT ((INFINIPATH_IBCS_L_STATE_INIT \
- << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
- (INFINIPATH_IBCS_LT_STATE_LINKUP \
- <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
-#define IPATH_IBSTATE_ARM ((INFINIPATH_IBCS_L_STATE_ARM \
- << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
- (INFINIPATH_IBCS_LT_STATE_LINKUP \
- <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
-#define IPATH_IBSTATE_ACTIVE ((INFINIPATH_IBCS_L_STATE_ACTIVE \
- << INFINIPATH_IBCS_LINKSTATE_SHIFT) | \
- (INFINIPATH_IBCS_LT_STATE_LINKUP \
- <<INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT))
/* kr_extstatus bits */
#define INFINIPATH_EXTS_SERDESPLLLOCK 0x1
@@ -286,8 +304,7 @@
/* L1 Power down; use with RXDETECT, Otherwise not used on IB side */
#define INFINIPATH_SERDC0_L1PWR_DN 0xF0ULL
-/* kr_xgxsconfig bits */
-#define INFINIPATH_XGXS_RESET 0x7ULL
+/* common kr_xgxsconfig bits (or safe in all, even if not implemented) */
#define INFINIPATH_XGXS_RX_POL_SHIFT 19
#define INFINIPATH_XGXS_RX_POL_MASK 0xfULL
@@ -417,6 +434,29 @@
ipath_kreg kr_pcieq1serdesconfig0;
ipath_kreg kr_pcieq1serdesconfig1;
ipath_kreg kr_pcieq1serdesstatus;
+ ipath_kreg kr_hrtbt_guid;
+ ipath_kreg kr_ibcddrctrl;
+ ipath_kreg kr_ibcddrstatus;
+ ipath_kreg kr_jintreload;
+
+ /* send dma related regs */
+ ipath_kreg kr_senddmabase;
+ ipath_kreg kr_senddmalengen;
+ ipath_kreg kr_senddmatail;
+ ipath_kreg kr_senddmahead;
+ ipath_kreg kr_senddmaheadaddr;
+ ipath_kreg kr_senddmabufmask0;
+ ipath_kreg kr_senddmabufmask1;
+ ipath_kreg kr_senddmabufmask2;
+ ipath_kreg kr_senddmastatus;
+
+ /* SerDes related regs (IBA7220-only) */
+ ipath_kreg kr_ibserdesctrl;
+ ipath_kreg kr_ib_epbacc;
+ ipath_kreg kr_ib_epbtrans;
+ ipath_kreg kr_pcie_epbacc;
+ ipath_kreg kr_pcie_epbtrans;
+ ipath_kreg kr_ib_ddsrxeq;
};
struct ipath_cregs {
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index a59bdbd..8ac5c1d 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -310,7 +310,7 @@
switch (wqe->wr.opcode) {
case IB_WR_SEND_WITH_IMM:
wc.wc_flags = IB_WC_WITH_IMM;
- wc.imm_data = wqe->wr.imm_data;
+ wc.imm_data = wqe->wr.ex.imm_data;
/* FALLTHROUGH */
case IB_WR_SEND:
if (!ipath_get_rwqe(qp, 0)) {
@@ -339,7 +339,7 @@
goto err;
}
wc.wc_flags = IB_WC_WITH_IMM;
- wc.imm_data = wqe->wr.imm_data;
+ wc.imm_data = wqe->wr.ex.imm_data;
if (!ipath_get_rwqe(qp, 1))
goto rnr_nak;
/* FALLTHROUGH */
@@ -483,14 +483,16 @@
static void want_buffer(struct ipath_devdata *dd)
{
- unsigned long flags;
+ if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA)) {
+ unsigned long flags;
- spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
- dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL;
- ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
- dd->ipath_sendctrl);
- ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
- spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl |= INFINIPATH_S_PIOINTBUFAVAIL;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+ }
}
/**
diff --git a/drivers/infiniband/hw/ipath/ipath_sd7220.c b/drivers/infiniband/hw/ipath/ipath_sd7220.c
new file mode 100644
index 0000000..aa47eb5
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_sd7220.c
@@ -0,0 +1,1462 @@
+/*
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+/*
+ * This file contains all of the code that is specific to the SerDes
+ * on the InfiniPath 7220 chip.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "ipath_kernel.h"
+#include "ipath_registers.h"
+#include "ipath_7220.h"
+
+/*
+ * The IBSerDesMappTable is a memory that holds values to be stored in
+ * various SerDes registers by IBC. It is not part of the normal kregs
+ * map and is used in exactly one place, hence the #define below.
+ */
+#define KR_IBSerDesMappTable (0x94000 / (sizeof(uint64_t)))
+
+/*
+ * Below used for sdnum parameter, selecting one of the two sections
+ * used for PCIe, or the single SerDes used for IB.
+ */
+#define PCIE_SERDES0 0
+#define PCIE_SERDES1 1
+
+/*
+ * The EPB requires addressing in a particular form. EPB_LOC() is intended
+ * to make #definitions a little more readable.
+ */
+#define EPB_ADDR_SHF 8
+#define EPB_LOC(chn, elt, reg) \
+ (((elt & 0xf) | ((chn & 7) << 4) | ((reg & 0x3f) << 9)) << \
+ EPB_ADDR_SHF)
+#define EPB_IB_QUAD0_CS_SHF (25)
+#define EPB_IB_QUAD0_CS (1U << EPB_IB_QUAD0_CS_SHF)
+#define EPB_IB_UC_CS_SHF (26)
+#define EPB_PCIE_UC_CS_SHF (27)
+#define EPB_GLOBAL_WR (1U << (EPB_ADDR_SHF + 8))
+
+/* Forward declarations. */
+static int ipath_sd7220_reg_mod(struct ipath_devdata *dd, int sdnum, u32 loc,
+ u32 data, u32 mask);
+static int ibsd_mod_allchnls(struct ipath_devdata *dd, int loc, int val,
+ int mask);
+static int ipath_sd_trimdone_poll(struct ipath_devdata *dd);
+static void ipath_sd_trimdone_monitor(struct ipath_devdata *dd,
+ const char *where);
+static int ipath_sd_setvals(struct ipath_devdata *dd);
+static int ipath_sd_early(struct ipath_devdata *dd);
+static int ipath_sd_dactrim(struct ipath_devdata *dd);
+/* Set the registers that IBC may muck with to their default "preset" values */
+int ipath_sd7220_presets(struct ipath_devdata *dd);
+static int ipath_internal_presets(struct ipath_devdata *dd);
+/* Tweak the register (CMUCTRL5) that contains the TRIMSELF controls */
+static int ipath_sd_trimself(struct ipath_devdata *dd, int val);
+static int epb_access(struct ipath_devdata *dd, int sdnum, int claim);
+
+void ipath_set_relock_poll(struct ipath_devdata *dd, int ibup);
+
+/*
+ * Below keeps track of whether the "once per power-on" initialization has
+ * been done, because uC code Version 1.32.17 or higher allows the uC to
+ * be reset at will, and Automatic Equalization may require it. So the
+ * state of the reset "pin", as reflected in was_reset parameter to
+ * ipath_sd7220_init() is no longer valid. Instead, we check for the
+ * actual uC code having been loaded.
+ */
+static int ipath_ibsd_ucode_loaded(struct ipath_devdata *dd)
+{
+ if (!dd->serdes_first_init_done && (ipath_sd7220_ib_vfy(dd) > 0))
+ dd->serdes_first_init_done = 1;
+ return dd->serdes_first_init_done;
+}
+
+/* repeat #define for local use. "Real" #define is in ipath_iba7220.c */
+#define INFINIPATH_HWE_IB_UC_MEMORYPARITYERR 0x0000004000000000ULL
+#define IB_MPREG5 (EPB_LOC(6, 0, 0xE) | (1L << EPB_IB_UC_CS_SHF))
+#define IB_MPREG6 (EPB_LOC(6, 0, 0xF) | (1U << EPB_IB_UC_CS_SHF))
+#define UC_PAR_CLR_D 8
+#define UC_PAR_CLR_M 0xC
+#define IB_CTRL2(chn) (EPB_LOC(chn, 7, 3) | EPB_IB_QUAD0_CS)
+#define START_EQ1(chan) EPB_LOC(chan, 7, 0x27)
+
+void ipath_sd7220_clr_ibpar(struct ipath_devdata *dd)
+{
+ int ret;
+
+ /* clear, then re-enable parity errs */
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6,
+ UC_PAR_CLR_D, UC_PAR_CLR_M);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed clearing IBSerDes Parity err\n");
+ goto bail;
+ }
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0,
+ UC_PAR_CLR_M);
+
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ udelay(4);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
+ INFINIPATH_HWE_IB_UC_MEMORYPARITYERR);
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+bail:
+ return;
+}
+
+/*
+ * After a reset or other unusual event, the epb interface may need
+ * to be re-synchronized, between the host and the uC.
+ * returns <0 for failure to resync within IBSD_RESYNC_TRIES (not expected)
+ */
+#define IBSD_RESYNC_TRIES 3
+#define IB_PGUDP(chn) (EPB_LOC((chn), 2, 1) | EPB_IB_QUAD0_CS)
+#define IB_CMUDONE(chn) (EPB_LOC((chn), 7, 0xF) | EPB_IB_QUAD0_CS)
+
+static int ipath_resync_ibepb(struct ipath_devdata *dd)
+{
+ int ret, pat, tries, chn;
+ u32 loc;
+
+ ret = -1;
+ chn = 0;
+ for (tries = 0; tries < (4 * IBSD_RESYNC_TRIES); ++tries) {
+ loc = IB_PGUDP(chn);
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed read in resync\n");
+ continue;
+ }
+ if (ret != 0xF0 && ret != 0x55 && tries == 0)
+ ipath_dev_err(dd, "unexpected pattern in resync\n");
+ pat = ret ^ 0xA5; /* alternate F0 and 55 */
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, pat, 0xFF);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed write in resync\n");
+ continue;
+ }
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed re-read in resync\n");
+ continue;
+ }
+ if (ret != pat) {
+ ipath_dev_err(dd, "Failed compare1 in resync\n");
+ continue;
+ }
+ loc = IB_CMUDONE(chn);
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, 0, 0);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed CMUDONE rd in resync\n");
+ continue;
+ }
+ if ((ret & 0x70) != ((chn << 4) | 0x40)) {
+ ipath_dev_err(dd, "Bad CMUDONE value %02X, chn %d\n",
+ ret, chn);
+ continue;
+ }
+ if (++chn == 4)
+ break; /* Success */
+ }
+ ipath_cdbg(VERBOSE, "Resync in %d tries\n", tries);
+ return (ret > 0) ? 0 : ret;
+}
+
+/*
+ * Localize the stuff that should be done to change IB uC reset
+ * returns <0 for errors.
+ */
+static int ipath_ibsd_reset(struct ipath_devdata *dd, int assert_rst)
+{
+ u64 rst_val;
+ int ret = 0;
+ unsigned long flags;
+
+ rst_val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibserdesctrl);
+ if (assert_rst) {
+ /*
+ * Vendor recommends "interrupting" uC before reset, to
+ * minimize possible glitches.
+ */
+ spin_lock_irqsave(&dd->ipath_sdepb_lock, flags);
+ epb_access(dd, IB_7220_SERDES, 1);
+ rst_val |= 1ULL;
+ /* Squelch possible parity error from _asserting_ reset */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask &
+ ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibserdesctrl, rst_val);
+ /* flush write, delay to ensure it took effect */
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ udelay(2);
+ /* once it's reset, can remove interrupt */
+ epb_access(dd, IB_7220_SERDES, -1);
+ spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags);
+ } else {
+ /*
+ * Before we de-assert reset, we need to deal with
+ * possible glitch on the Parity-error line.
+ * Suppress it around the reset, both in chip-level
+ * hwerrmask and in IB uC control reg. uC will allow
+ * it again during startup.
+ */
+ u64 val;
+ rst_val &= ~(1ULL);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask &
+ ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR);
+
+ ret = ipath_resync_ibepb(dd);
+ if (ret < 0)
+ ipath_dev_err(dd, "unable to re-sync IB EPB\n");
+
+ /* set uC control regs to suppress parity errs */
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG5, 1, 1);
+ if (ret < 0)
+ goto bail;
+ /* IB uC code past Version 1.32.17 allow suppression of wdog */
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0x80,
+ 0x80);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed to set WDOG disable\n");
+ goto bail;
+ }
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibserdesctrl, rst_val);
+ /* flush write, delay for startup */
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ udelay(1);
+ /* clear, then re-enable parity errs */
+ ipath_sd7220_clr_ibpar(dd);
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_hwerrstatus);
+ if (val & INFINIPATH_HWE_IB_UC_MEMORYPARITYERR) {
+ ipath_dev_err(dd, "IBUC Parity still set after RST\n");
+ dd->ipath_hwerrmask &=
+ ~INFINIPATH_HWE_IB_UC_MEMORYPARITYERR;
+ }
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrmask,
+ dd->ipath_hwerrmask);
+ }
+
+bail:
+ return ret;
+}
+
+static void ipath_sd_trimdone_monitor(struct ipath_devdata *dd,
+ const char *where)
+{
+ int ret, chn, baduns;
+ u64 val;
+
+ if (!where)
+ where = "?";
+
+ /* give time for reset to settle out in EPB */
+ udelay(2);
+
+ ret = ipath_resync_ibepb(dd);
+ if (ret < 0)
+ ipath_dev_err(dd, "not able to re-sync IB EPB (%s)\n", where);
+
+ /* Do "sacrificial read" to get EPB in sane state after reset */
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_CTRL2(0), 0, 0);
+ if (ret < 0)
+ ipath_dev_err(dd, "Failed TRIMDONE 1st read, (%s)\n", where);
+
+ /* Check/show "summary" Trim-done bit in IBCStatus */
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+ if (val & (1ULL << 11))
+ ipath_cdbg(VERBOSE, "IBCS TRIMDONE set (%s)\n", where);
+ else
+ ipath_dev_err(dd, "IBCS TRIMDONE clear (%s)\n", where);
+
+ udelay(2);
+
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, IB_MPREG6, 0x80, 0x80);
+ if (ret < 0)
+ ipath_dev_err(dd, "Failed Dummy RMW, (%s)\n", where);
+ udelay(10);
+
+ baduns = 0;
+
+ for (chn = 3; chn >= 0; --chn) {
+ /* Read CTRL reg for each channel to check TRIMDONE */
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
+ IB_CTRL2(chn), 0, 0);
+ if (ret < 0)
+ ipath_dev_err(dd, "Failed checking TRIMDONE, chn %d"
+ " (%s)\n", chn, where);
+
+ if (!(ret & 0x10)) {
+ int probe;
+ baduns |= (1 << chn);
+ ipath_dev_err(dd, "TRIMDONE cleared on chn %d (%02X)."
+ " (%s)\n", chn, ret, where);
+ probe = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
+ IB_PGUDP(0), 0, 0);
+ ipath_dev_err(dd, "probe is %d (%02X)\n",
+ probe, probe);
+ probe = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
+ IB_CTRL2(chn), 0, 0);
+ ipath_dev_err(dd, "re-read: %d (%02X)\n",
+ probe, probe);
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
+ IB_CTRL2(chn), 0x10, 0x10);
+ if (ret < 0)
+ ipath_dev_err(dd,
+ "Err on TRIMDONE rewrite1\n");
+ }
+ }
+ for (chn = 3; chn >= 0; --chn) {
+ /* Read CTRL reg for each channel to check TRIMDONE */
+ if (baduns & (1 << chn)) {
+ ipath_dev_err(dd,
+ "Reseting TRIMDONE on chn %d (%s)\n",
+ chn, where);
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
+ IB_CTRL2(chn), 0x10, 0x10);
+ if (ret < 0)
+ ipath_dev_err(dd, "Failed re-setting "
+ "TRIMDONE, chn %d (%s)\n",
+ chn, where);
+ }
+ }
+}
+
+/*
+ * Below is portion of IBA7220-specific bringup_serdes() that actually
+ * deals with registers and memory within the SerDes itself.
+ * Post IB uC code version 1.32.17, was_reset being 1 is not really
+ * informative, so we double-check.
+ */
+int ipath_sd7220_init(struct ipath_devdata *dd, int was_reset)
+{
+ int ret = 1; /* default to failure */
+ int first_reset;
+ int val_stat;
+
+ if (!was_reset) {
+ /* entered with reset not asserted, we need to do it */
+ ipath_ibsd_reset(dd, 1);
+ ipath_sd_trimdone_monitor(dd, "Driver-reload");
+ }
+
+ /* Substitute our deduced value for was_reset */
+ ret = ipath_ibsd_ucode_loaded(dd);
+ if (ret < 0) {
+ ret = 1;
+ goto done;
+ }
+ first_reset = !ret; /* First reset if IBSD uCode not yet loaded */
+
+ /*
+ * Alter some regs per vendor latest doc, reset-defaults
+ * are not right for IB.
+ */
+ ret = ipath_sd_early(dd);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed to set IB SERDES early defaults\n");
+ ret = 1;
+ goto done;
+ }
+
+ /*
+ * Set DAC manual trim IB.
+ * We only do this once after chip has been reset (usually
+ * same as once per system boot).
+ */
+ if (first_reset) {
+ ret = ipath_sd_dactrim(dd);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed IB SERDES DAC trim\n");
+ ret = 1;
+ goto done;
+ }
+ }
+
+ /*
+ * Set various registers (DDS and RXEQ) that will be
+ * controlled by IBC (in 1.2 mode) to reasonable preset values
+ * Calling the "internal" version avoids the "check for needed"
+ * and "trimdone monitor" that might be counter-productive.
+ */
+ ret = ipath_internal_presets(dd);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed to set IB SERDES presets\n");
+ ret = 1;
+ goto done;
+ }
+ ret = ipath_sd_trimself(dd, 0x80);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed to set IB SERDES TRIMSELF\n");
+ ret = 1;
+ goto done;
+ }
+
+ /* Load image, then try to verify */
+ ret = 0; /* Assume success */
+ if (first_reset) {
+ int vfy;
+ int trim_done;
+ ipath_dbg("SerDes uC was reset, reloading PRAM\n");
+ ret = ipath_sd7220_ib_load(dd);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed to load IB SERDES image\n");
+ ret = 1;
+ goto done;
+ }
+
+ /* Loaded image, try to verify */
+ vfy = ipath_sd7220_ib_vfy(dd);
+ if (vfy != ret) {
+ ipath_dev_err(dd, "SERDES PRAM VFY failed\n");
+ ret = 1;
+ goto done;
+ }
+ /*
+ * Loaded and verified. Almost good...
+ * hold "success" in ret
+ */
+ ret = 0;
+
+ /*
+ * Prev steps all worked, continue bringup
+ * De-assert RESET to uC, only in first reset, to allow
+ * trimming.
+ *
+ * Since our default setup sets START_EQ1 to
+ * PRESET, we need to clear that for this very first run.
+ */
+ ret = ibsd_mod_allchnls(dd, START_EQ1(0), 0, 0x38);
+ if (ret < 0) {
+ ipath_dev_err(dd, "Failed clearing START_EQ1\n");
+ ret = 1;
+ goto done;
+ }
+
+ ipath_ibsd_reset(dd, 0);
+ /*
+ * If this is not the first reset, trimdone should be set
+ * already.
+ */
+ trim_done = ipath_sd_trimdone_poll(dd);
+ /*
+ * Whether or not trimdone succeeded, we need to put the
+ * uC back into reset to avoid a possible fight with the
+ * IBC state-machine.
+ */
+ ipath_ibsd_reset(dd, 1);
+
+ if (!trim_done) {
+ ipath_dev_err(dd, "No TRIMDONE seen\n");
+ ret = 1;
+ goto done;
+ }
+
+ ipath_sd_trimdone_monitor(dd, "First-reset");
+ /* Remember so we do not re-do the load, dactrim, etc. */
+ dd->serdes_first_init_done = 1;
+ }
+ /*
+ * Setup for channel training and load values for
+ * RxEq and DDS in tables used by IBC in IB1.2 mode
+ */
+
+ val_stat = ipath_sd_setvals(dd);
+ if (val_stat < 0)
+ ret = 1;
+done:
+ /* start relock timer regardless, but start at 1 second */
+ ipath_set_relock_poll(dd, -1);
+ return ret;
+}
+
+#define EPB_ACC_REQ 1
+#define EPB_ACC_GNT 0x100
+#define EPB_DATA_MASK 0xFF
+#define EPB_RD (1ULL << 24)
+#define EPB_TRANS_RDY (1ULL << 31)
+#define EPB_TRANS_ERR (1ULL << 30)
+#define EPB_TRANS_TRIES 5
+
+/*
+ * query, claim, release ownership of the EPB (External Parallel Bus)
+ * for a specified SERDES.
+ * the "claim" parameter is >0 to claim, <0 to release, 0 to query.
+ * Returns <0 for errors, >0 if we had ownership, else 0.
+ */
+static int epb_access(struct ipath_devdata *dd, int sdnum, int claim)
+{
+ u16 acc;
+ u64 accval;
+ int owned = 0;
+ u64 oct_sel = 0;
+
+ switch (sdnum) {
+ case IB_7220_SERDES :
+ /*
+ * The IB SERDES "ownership" is fairly simple. A single each
+ * request/grant.
+ */
+ acc = dd->ipath_kregs->kr_ib_epbacc;
+ break;
+ case PCIE_SERDES0 :
+ case PCIE_SERDES1 :
+ /* PCIe SERDES has two "octants", need to select which */
+ acc = dd->ipath_kregs->kr_pcie_epbacc;
+ oct_sel = (2 << (sdnum - PCIE_SERDES0));
+ break;
+ default :
+ return 0;
+ }
+
+ /* Make sure any outstanding transaction was seen */
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ udelay(15);
+
+ accval = ipath_read_kreg32(dd, acc);
+
+ owned = !!(accval & EPB_ACC_GNT);
+ if (claim < 0) {
+ /* Need to release */
+ u64 pollval;
+ /*
+ * The only writeable bits are the request and CS.
+ * Both should be clear
+ */
+ u64 newval = 0;
+ ipath_write_kreg(dd, acc, newval);
+ /* First read after write is not trustworthy */
+ pollval = ipath_read_kreg32(dd, acc);
+ udelay(5);
+ pollval = ipath_read_kreg32(dd, acc);
+ if (pollval & EPB_ACC_GNT)
+ owned = -1;
+ } else if (claim > 0) {
+ /* Need to claim */
+ u64 pollval;
+ u64 newval = EPB_ACC_REQ | oct_sel;
+ ipath_write_kreg(dd, acc, newval);
+ /* First read after write is not trustworthy */
+ pollval = ipath_read_kreg32(dd, acc);
+ udelay(5);
+ pollval = ipath_read_kreg32(dd, acc);
+ if (!(pollval & EPB_ACC_GNT))
+ owned = -1;
+ }
+ return owned;
+}
+
+/*
+ * Lemma to deal with race condition of write..read to epb regs
+ */
+static int epb_trans(struct ipath_devdata *dd, u16 reg, u64 i_val, u64 *o_vp)
+{
+ int tries;
+ u64 transval;
+
+
+ ipath_write_kreg(dd, reg, i_val);
+ /* Throw away first read, as RDY bit may be stale */
+ transval = ipath_read_kreg64(dd, reg);
+
+ for (tries = EPB_TRANS_TRIES; tries; --tries) {
+ transval = ipath_read_kreg32(dd, reg);
+ if (transval & EPB_TRANS_RDY)
+ break;
+ udelay(5);
+ }
+ if (transval & EPB_TRANS_ERR)
+ return -1;
+ if (tries > 0 && o_vp)
+ *o_vp = transval;
+ return tries;
+}
+
+/**
+ *
+ * ipath_sd7220_reg_mod - modify SERDES register
+ * @dd: the infinipath device
+ * @sdnum: which SERDES to access
+ * @loc: location - channel, element, register, as packed by EPB_LOC() macro.
+ * @wd: Write Data - value to set in register
+ * @mask: ones where data should be spliced into reg.
+ *
+ * Basic register read/modify/write, with un-needed acesses elided. That is,
+ * a mask of zero will prevent write, while a mask of 0xFF will prevent read.
+ * returns current (presumed, if a write was done) contents of selected
+ * register, or <0 if errors.
+ */
+static int ipath_sd7220_reg_mod(struct ipath_devdata *dd, int sdnum, u32 loc,
+ u32 wd, u32 mask)
+{
+ u16 trans;
+ u64 transval;
+ int owned;
+ int tries, ret;
+ unsigned long flags;
+
+ switch (sdnum) {
+ case IB_7220_SERDES :
+ trans = dd->ipath_kregs->kr_ib_epbtrans;
+ break;
+ case PCIE_SERDES0 :
+ case PCIE_SERDES1 :
+ trans = dd->ipath_kregs->kr_pcie_epbtrans;
+ break;
+ default :
+ return -1;
+ }
+
+ /*
+ * All access is locked in software (vs other host threads) and
+ * hardware (vs uC access).
+ */
+ spin_lock_irqsave(&dd->ipath_sdepb_lock, flags);
+
+ owned = epb_access(dd, sdnum, 1);
+ if (owned < 0) {
+ spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags);
+ return -1;
+ }
+ ret = 0;
+ for (tries = EPB_TRANS_TRIES; tries; --tries) {
+ transval = ipath_read_kreg32(dd, trans);
+ if (transval & EPB_TRANS_RDY)
+ break;
+ udelay(5);
+ }
+
+ if (tries > 0) {
+ tries = 1; /* to make read-skip work */
+ if (mask != 0xFF) {
+ /*
+ * Not a pure write, so need to read.
+ * loc encodes chip-select as well as address
+ */
+ transval = loc | EPB_RD;
+ tries = epb_trans(dd, trans, transval, &transval);
+ }
+ if (tries > 0 && mask != 0) {
+ /*
+ * Not a pure read, so need to write.
+ */
+ wd = (wd & mask) | (transval & ~mask);
+ transval = loc | (wd & EPB_DATA_MASK);
+ tries = epb_trans(dd, trans, transval, &transval);
+ }
+ }
+ /* else, failed to see ready, what error-handling? */
+
+ /*
+ * Release bus. Failure is an error.
+ */
+ if (epb_access(dd, sdnum, -1) < 0)
+ ret = -1;
+ else
+ ret = transval & EPB_DATA_MASK;
+
+ spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags);
+ if (tries <= 0)
+ ret = -1;
+ return ret;
+}
+
+#define EPB_ROM_R (2)
+#define EPB_ROM_W (1)
+/*
+ * Below, all uC-related, use appropriate UC_CS, depending
+ * on which SerDes is used.
+ */
+#define EPB_UC_CTL EPB_LOC(6, 0, 0)
+#define EPB_MADDRL EPB_LOC(6, 0, 2)
+#define EPB_MADDRH EPB_LOC(6, 0, 3)
+#define EPB_ROMDATA EPB_LOC(6, 0, 4)
+#define EPB_RAMDATA EPB_LOC(6, 0, 5)
+
+/* Transfer date to/from uC Program RAM of IB or PCIe SerDes */
+static int ipath_sd7220_ram_xfer(struct ipath_devdata *dd, int sdnum, u32 loc,
+ u8 *buf, int cnt, int rd_notwr)
+{
+ u16 trans;
+ u64 transval;
+ u64 csbit;
+ int owned;
+ int tries;
+ int sofar;
+ int addr;
+ int ret;
+ unsigned long flags;
+ const char *op;
+
+ /* Pick appropriate transaction reg and "Chip select" for this serdes */
+ switch (sdnum) {
+ case IB_7220_SERDES :
+ csbit = 1ULL << EPB_IB_UC_CS_SHF;
+ trans = dd->ipath_kregs->kr_ib_epbtrans;
+ break;
+ case PCIE_SERDES0 :
+ case PCIE_SERDES1 :
+ /* PCIe SERDES has uC "chip select" in different bit, too */
+ csbit = 1ULL << EPB_PCIE_UC_CS_SHF;
+ trans = dd->ipath_kregs->kr_pcie_epbtrans;
+ break;
+ default :
+ return -1;
+ }
+
+ op = rd_notwr ? "Rd" : "Wr";
+ spin_lock_irqsave(&dd->ipath_sdepb_lock, flags);
+
+ owned = epb_access(dd, sdnum, 1);
+ if (owned < 0) {
+ spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags);
+ ipath_dbg("Could not get %s access to %s EPB: %X, loc %X\n",
+ op, (sdnum == IB_7220_SERDES) ? "IB" : "PCIe",
+ owned, loc);
+ return -1;
+ }
+
+ /*
+ * In future code, we may need to distinguish several address ranges,
+ * and select various memories based on this. For now, just trim
+ * "loc" (location including address and memory select) to
+ * "addr" (address within memory). we will only support PRAM
+ * The memory is 8KB.
+ */
+ addr = loc & 0x1FFF;
+ for (tries = EPB_TRANS_TRIES; tries; --tries) {
+ transval = ipath_read_kreg32(dd, trans);
+ if (transval & EPB_TRANS_RDY)
+ break;
+ udelay(5);
+ }
+
+ sofar = 0;
+ if (tries <= 0)
+ ipath_dbg("No initial RDY on EPB access request\n");
+ else {
+ /*
+ * Every "memory" access is doubly-indirect.
+ * We set two bytes of address, then read/write
+ * one or mores bytes of data.
+ */
+
+ /* First, we set control to "Read" or "Write" */
+ transval = csbit | EPB_UC_CTL |
+ (rd_notwr ? EPB_ROM_R : EPB_ROM_W);
+ tries = epb_trans(dd, trans, transval, &transval);
+ if (tries <= 0)
+ ipath_dbg("No EPB response to uC %s cmd\n", op);
+ while (tries > 0 && sofar < cnt) {
+ if (!sofar) {
+ /* Only set address at start of chunk */
+ int addrbyte = (addr + sofar) >> 8;
+ transval = csbit | EPB_MADDRH | addrbyte;
+ tries = epb_trans(dd, trans, transval,
+ &transval);
+ if (tries <= 0) {
+ ipath_dbg("No EPB response ADDRH\n");
+ break;
+ }
+ addrbyte = (addr + sofar) & 0xFF;
+ transval = csbit | EPB_MADDRL | addrbyte;
+ tries = epb_trans(dd, trans, transval,
+ &transval);
+ if (tries <= 0) {
+ ipath_dbg("No EPB response ADDRL\n");
+ break;
+ }
+ }
+
+ if (rd_notwr)
+ transval = csbit | EPB_ROMDATA | EPB_RD;
+ else
+ transval = csbit | EPB_ROMDATA | buf[sofar];
+ tries = epb_trans(dd, trans, transval, &transval);
+ if (tries <= 0) {
+ ipath_dbg("No EPB response DATA\n");
+ break;
+ }
+ if (rd_notwr)
+ buf[sofar] = transval & EPB_DATA_MASK;
+ ++sofar;
+ }
+ /* Finally, clear control-bit for Read or Write */
+ transval = csbit | EPB_UC_CTL;
+ tries = epb_trans(dd, trans, transval, &transval);
+ if (tries <= 0)
+ ipath_dbg("No EPB response to drop of uC %s cmd\n", op);
+ }
+
+ ret = sofar;
+ /* Release bus. Failure is an error */
+ if (epb_access(dd, sdnum, -1) < 0)
+ ret = -1;
+
+ spin_unlock_irqrestore(&dd->ipath_sdepb_lock, flags);
+ if (tries <= 0) {
+ ipath_dbg("SERDES PRAM %s failed after %d bytes\n", op, sofar);
+ ret = -1;
+ }
+ return ret;
+}
+
+#define PROG_CHUNK 64
+
+int ipath_sd7220_prog_ld(struct ipath_devdata *dd, int sdnum,
+ u8 *img, int len, int offset)
+{
+ int cnt, sofar, req;
+
+ sofar = 0;
+ while (sofar < len) {
+ req = len - sofar;
+ if (req > PROG_CHUNK)
+ req = PROG_CHUNK;
+ cnt = ipath_sd7220_ram_xfer(dd, sdnum, offset + sofar,
+ img + sofar, req, 0);
+ if (cnt < req) {
+ sofar = -1;
+ break;
+ }
+ sofar += req;
+ }
+ return sofar;
+}
+
+#define VFY_CHUNK 64
+#define SD_PRAM_ERROR_LIMIT 42
+
+int ipath_sd7220_prog_vfy(struct ipath_devdata *dd, int sdnum,
+ const u8 *img, int len, int offset)
+{
+ int cnt, sofar, req, idx, errors;
+ unsigned char readback[VFY_CHUNK];
+
+ errors = 0;
+ sofar = 0;
+ while (sofar < len) {
+ req = len - sofar;
+ if (req > VFY_CHUNK)
+ req = VFY_CHUNK;
+ cnt = ipath_sd7220_ram_xfer(dd, sdnum, sofar + offset,
+ readback, req, 1);
+ if (cnt < req) {
+ /* failed in read itself */
+ sofar = -1;
+ break;
+ }
+ for (idx = 0; idx < cnt; ++idx) {
+ if (readback[idx] != img[idx+sofar])
+ ++errors;
+ }
+ sofar += cnt;
+ }
+ return errors ? -errors : sofar;
+}
+
+/* IRQ not set up at this point in init, so we poll. */
+#define IB_SERDES_TRIM_DONE (1ULL << 11)
+#define TRIM_TMO (30)
+
+static int ipath_sd_trimdone_poll(struct ipath_devdata *dd)
+{
+ int trim_tmo, ret;
+ uint64_t val;
+
+ /*
+ * Default to failure, so IBC will not start
+ * without IB_SERDES_TRIM_DONE.
+ */
+ ret = 0;
+ for (trim_tmo = 0; trim_tmo < TRIM_TMO; ++trim_tmo) {
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+ if (val & IB_SERDES_TRIM_DONE) {
+ ipath_cdbg(VERBOSE, "TRIMDONE after %d\n", trim_tmo);
+ ret = 1;
+ break;
+ }
+ msleep(10);
+ }
+ if (trim_tmo >= TRIM_TMO) {
+ ipath_dev_err(dd, "No TRIMDONE in %d tries\n", trim_tmo);
+ ret = 0;
+ }
+ return ret;
+}
+
+#define TX_FAST_ELT (9)
+
+/*
+ * Set the "negotiation" values for SERDES. These are used by the IB1.2
+ * link negotiation. Macros below are attempt to keep the values a
+ * little more human-editable.
+ * First, values related to Drive De-emphasis Settings.
+ */
+
+#define NUM_DDS_REGS 6
+#define DDS_REG_MAP 0x76A910 /* LSB-first list of regs (in elt 9) to mod */
+
+#define DDS_VAL(amp_d, main_d, ipst_d, ipre_d, amp_s, main_s, ipst_s, ipre_s) \
+ { { ((amp_d & 0x1F) << 1) | 1, ((amp_s & 0x1F) << 1) | 1, \
+ (main_d << 3) | 4 | (ipre_d >> 2), \
+ (main_s << 3) | 4 | (ipre_s >> 2), \
+ ((ipst_d & 0xF) << 1) | ((ipre_d & 3) << 6) | 0x21, \
+ ((ipst_s & 0xF) << 1) | ((ipre_s & 3) << 6) | 0x21 } }
+
+static struct dds_init {
+ uint8_t reg_vals[NUM_DDS_REGS];
+} dds_init_vals[] = {
+ /* DDR(FDR) SDR(HDR) */
+ /* Vendor recommends below for 3m cable */
+#define DDS_3M 0
+ DDS_VAL(31, 19, 12, 0, 29, 22, 9, 0),
+ DDS_VAL(31, 12, 15, 4, 31, 15, 15, 1),
+ DDS_VAL(31, 13, 15, 3, 31, 16, 15, 0),
+ DDS_VAL(31, 14, 15, 2, 31, 17, 14, 0),
+ DDS_VAL(31, 15, 15, 1, 31, 18, 13, 0),
+ DDS_VAL(31, 16, 15, 0, 31, 19, 12, 0),
+ DDS_VAL(31, 17, 14, 0, 31, 20, 11, 0),
+ DDS_VAL(31, 18, 13, 0, 30, 21, 10, 0),
+ DDS_VAL(31, 20, 11, 0, 28, 23, 8, 0),
+ DDS_VAL(31, 21, 10, 0, 27, 24, 7, 0),
+ DDS_VAL(31, 22, 9, 0, 26, 25, 6, 0),
+ DDS_VAL(30, 23, 8, 0, 25, 26, 5, 0),
+ DDS_VAL(29, 24, 7, 0, 23, 27, 4, 0),
+ /* Vendor recommends below for 1m cable */
+#define DDS_1M 13
+ DDS_VAL(28, 25, 6, 0, 21, 28, 3, 0),
+ DDS_VAL(27, 26, 5, 0, 19, 29, 2, 0),
+ DDS_VAL(25, 27, 4, 0, 17, 30, 1, 0)
+};
+
+/*
+ * Next, values related to Receive Equalization.
+ * In comments, FDR (Full) is IB DDR, HDR (Half) is IB SDR
+ */
+/* Hardware packs an element number and register address thus: */
+#define RXEQ_INIT_RDESC(elt, addr) (((elt) & 0xF) | ((addr) << 4))
+#define RXEQ_VAL(elt, adr, val0, val1, val2, val3) \
+ {RXEQ_INIT_RDESC((elt), (adr)), {(val0), (val1), (val2), (val3)} }
+
+#define RXEQ_VAL_ALL(elt, adr, val) \
+ {RXEQ_INIT_RDESC((elt), (adr)), {(val), (val), (val), (val)} }
+
+#define RXEQ_SDR_DFELTH 0
+#define RXEQ_SDR_TLTH 0
+#define RXEQ_SDR_G1CNT_Z1CNT 0x11
+#define RXEQ_SDR_ZCNT 23
+
+static struct rxeq_init {
+ u16 rdesc; /* in form used in SerDesDDSRXEQ */
+ u8 rdata[4];
+} rxeq_init_vals[] = {
+ /* Set Rcv Eq. to Preset node */
+ RXEQ_VAL_ALL(7, 0x27, 0x10),
+ /* Set DFELTHFDR/HDR thresholds */
+ RXEQ_VAL(7, 8, 0, 0, 0, 0), /* FDR */
+ RXEQ_VAL(7, 0x21, 0, 0, 0, 0), /* HDR */
+ /* Set TLTHFDR/HDR theshold */
+ RXEQ_VAL(7, 9, 2, 2, 2, 2), /* FDR */
+ RXEQ_VAL(7, 0x23, 2, 2, 2, 2), /* HDR */
+ /* Set Preamp setting 2 (ZFR/ZCNT) */
+ RXEQ_VAL(7, 0x1B, 12, 12, 12, 12), /* FDR */
+ RXEQ_VAL(7, 0x1C, 12, 12, 12, 12), /* HDR */
+ /* Set Preamp DC gain and Setting 1 (GFR/GHR) */
+ RXEQ_VAL(7, 0x1E, 0x10, 0x10, 0x10, 0x10), /* FDR */
+ RXEQ_VAL(7, 0x1F, 0x10, 0x10, 0x10, 0x10), /* HDR */
+ /* Toggle RELOCK (in VCDL_CTRL0) to lock to data */
+ RXEQ_VAL_ALL(6, 6, 0x20), /* Set D5 High */
+ RXEQ_VAL_ALL(6, 6, 0), /* Set D5 Low */
+};
+
+/* There are 17 values from vendor, but IBC only accesses the first 16 */
+#define DDS_ROWS (16)
+#define RXEQ_ROWS ARRAY_SIZE(rxeq_init_vals)
+
+static int ipath_sd_setvals(struct ipath_devdata *dd)
+{
+ int idx, midx;
+ int min_idx; /* Minimum index for this portion of table */
+ uint32_t dds_reg_map;
+ u64 __iomem *taddr, *iaddr;
+ uint64_t data;
+ uint64_t sdctl;
+
+ taddr = dd->ipath_kregbase + KR_IBSerDesMappTable;
+ iaddr = dd->ipath_kregbase + dd->ipath_kregs->kr_ib_ddsrxeq;
+
+ /*
+ * Init the DDS section of the table.
+ * Each "row" of the table provokes NUM_DDS_REG writes, to the
+ * registers indicated in DDS_REG_MAP.
+ */
+ sdctl = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibserdesctrl);
+ sdctl = (sdctl & ~(0x1f << 8)) | (NUM_DDS_REGS << 8);
+ sdctl = (sdctl & ~(0x1f << 13)) | (RXEQ_ROWS << 13);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_ibserdesctrl, sdctl);
+
+ /*
+ * Iterate down table within loop for each register to store.
+ */
+ dds_reg_map = DDS_REG_MAP;
+ for (idx = 0; idx < NUM_DDS_REGS; ++idx) {
+ data = ((dds_reg_map & 0xF) << 4) | TX_FAST_ELT;
+ writeq(data, iaddr + idx);
+ mmiowb();
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ dds_reg_map >>= 4;
+ for (midx = 0; midx < DDS_ROWS; ++midx) {
+ u64 __iomem *daddr = taddr + ((midx << 4) + idx);
+ data = dds_init_vals[midx].reg_vals[idx];
+ writeq(data, daddr);
+ mmiowb();
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ } /* End inner for (vals for this reg, each row) */
+ } /* end outer for (regs to be stored) */
+
+ /*
+ * Init the RXEQ section of the table. As explained above the table
+ * rxeq_init_vals[], this runs in a different order, as the pattern
+ * of register references is more complex, but there are only
+ * four "data" values per register.
+ */
+ min_idx = idx; /* RXEQ indices pick up where DDS left off */
+ taddr += 0x100; /* RXEQ data is in second half of table */
+ /* Iterate through RXEQ register addresses */
+ for (idx = 0; idx < RXEQ_ROWS; ++idx) {
+ int didx; /* "destination" */
+ int vidx;
+
+ /* didx is offset by min_idx to address RXEQ range of regs */
+ didx = idx + min_idx;
+ /* Store the next RXEQ register address */
+ writeq(rxeq_init_vals[idx].rdesc, iaddr + didx);
+ mmiowb();
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ /* Iterate through RXEQ values */
+ for (vidx = 0; vidx < 4; vidx++) {
+ data = rxeq_init_vals[idx].rdata[vidx];
+ writeq(data, taddr + (vidx << 6) + idx);
+ mmiowb();
+ ipath_read_kreg32(dd, dd->ipath_kregs->kr_scratch);
+ }
+ } /* end outer for (Reg-writes for RXEQ) */
+ return 0;
+}
+
+#define CMUCTRL5 EPB_LOC(7, 0, 0x15)
+#define RXHSCTRL0(chan) EPB_LOC(chan, 6, 0)
+#define VCDL_DAC2(chan) EPB_LOC(chan, 6, 5)
+#define VCDL_CTRL0(chan) EPB_LOC(chan, 6, 6)
+#define VCDL_CTRL2(chan) EPB_LOC(chan, 6, 8)
+#define START_EQ2(chan) EPB_LOC(chan, 7, 0x28)
+
+static int ibsd_sto_noisy(struct ipath_devdata *dd, int loc, int val, int mask)
+{
+ int ret = -1;
+ int sloc; /* shifted loc, for messages */
+
+ loc |= (1U << EPB_IB_QUAD0_CS_SHF);
+ sloc = loc >> EPB_ADDR_SHF;
+
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, val, mask);
+ if (ret < 0)
+ ipath_dev_err(dd, "Write failed: elt %d,"
+ " addr 0x%X, chnl %d, val 0x%02X, mask 0x%02X\n",
+ (sloc & 0xF), (sloc >> 9) & 0x3f, (sloc >> 4) & 7,
+ val & 0xFF, mask & 0xFF);
+ return ret;
+}
+
+/*
+ * Repeat a "store" across all channels of the IB SerDes.
+ * Although nominally it inherits the "read value" of the last
+ * channel it modified, the only really useful return is <0 for
+ * failure, >= 0 for success. The parameter 'loc' is assumed to
+ * be the location for the channel-0 copy of the register to
+ * be modified.
+ */
+static int ibsd_mod_allchnls(struct ipath_devdata *dd, int loc, int val,
+ int mask)
+{
+ int ret = -1;
+ int chnl;
+
+ if (loc & EPB_GLOBAL_WR) {
+ /*
+ * Our caller has assured us that we can set all four
+ * channels at once. Trust that. If mask is not 0xFF,
+ * we will read the _specified_ channel for our starting
+ * value.
+ */
+ loc |= (1U << EPB_IB_QUAD0_CS_SHF);
+ chnl = (loc >> (4 + EPB_ADDR_SHF)) & 7;
+ if (mask != 0xFF) {
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES,
+ loc & ~EPB_GLOBAL_WR, 0, 0);
+ if (ret < 0) {
+ int sloc = loc >> EPB_ADDR_SHF;
+ ipath_dev_err(dd, "pre-read failed: elt %d,"
+ " addr 0x%X, chnl %d\n", (sloc & 0xF),
+ (sloc >> 9) & 0x3f, chnl);
+ return ret;
+ }
+ val = (ret & ~mask) | (val & mask);
+ }
+ loc &= ~(7 << (4+EPB_ADDR_SHF));
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, loc, val, 0xFF);
+ if (ret < 0) {
+ int sloc = loc >> EPB_ADDR_SHF;
+ ipath_dev_err(dd, "Global WR failed: elt %d,"
+ " addr 0x%X, val %02X\n",
+ (sloc & 0xF), (sloc >> 9) & 0x3f, val);
+ }
+ return ret;
+ }
+ /* Clear "channel" and set CS so we can simply iterate */
+ loc &= ~(7 << (4+EPB_ADDR_SHF));
+ loc |= (1U << EPB_IB_QUAD0_CS_SHF);
+ for (chnl = 0; chnl < 4; ++chnl) {
+ int cloc;
+ cloc = loc | (chnl << (4+EPB_ADDR_SHF));
+ ret = ipath_sd7220_reg_mod(dd, IB_7220_SERDES, cloc, val, mask);
+ if (ret < 0) {
+ int sloc = loc >> EPB_ADDR_SHF;
+ ipath_dev_err(dd, "Write failed: elt %d,"
+ " addr 0x%X, chnl %d, val 0x%02X,"
+ " mask 0x%02X\n",
+ (sloc & 0xF), (sloc >> 9) & 0x3f, chnl,
+ val & 0xFF, mask & 0xFF);
+ break;
+ }
+ }
+ return ret;
+}
+
+/*
+ * Set the Tx values normally modified by IBC in IB1.2 mode to default
+ * values, as gotten from first row of init table.
+ */
+static int set_dds_vals(struct ipath_devdata *dd, struct dds_init *ddi)
+{
+ int ret;
+ int idx, reg, data;
+ uint32_t regmap;
+
+ regmap = DDS_REG_MAP;
+ for (idx = 0; idx < NUM_DDS_REGS; ++idx) {
+ reg = (regmap & 0xF);
+ regmap >>= 4;
+ data = ddi->reg_vals[idx];
+ /* Vendor says RMW not needed for these regs, use 0xFF mask */
+ ret = ibsd_mod_allchnls(dd, EPB_LOC(0, 9, reg), data, 0xFF);
+ if (ret < 0)
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Set the Rx values normally modified by IBC in IB1.2 mode to default
+ * values, as gotten from selected column of init table.
+ */
+static int set_rxeq_vals(struct ipath_devdata *dd, int vsel)
+{
+ int ret;
+ int ridx;
+ int cnt = ARRAY_SIZE(rxeq_init_vals);
+
+ for (ridx = 0; ridx < cnt; ++ridx) {
+ int elt, reg, val, loc;
+ elt = rxeq_init_vals[ridx].rdesc & 0xF;
+ reg = rxeq_init_vals[ridx].rdesc >> 4;
+ loc = EPB_LOC(0, elt, reg);
+ val = rxeq_init_vals[ridx].rdata[vsel];
+ /* mask of 0xFF, because hardware does full-byte store. */
+ ret = ibsd_mod_allchnls(dd, loc, val, 0xFF);
+ if (ret < 0)
+ break;
+ }
+ return ret;
+}
+
+/*
+ * Set the default values (row 0) for DDR Driver Demphasis.
+ * we do this initially and whenever we turn off IB-1.2
+ * The "default" values for Rx equalization are also stored to
+ * SerDes registers. Formerly (and still default), we used set 2.
+ * For experimenting with cables and link-partners, we allow changing
+ * that via a module parameter.
+ */
+static unsigned ipath_rxeq_set = 2;
+module_param_named(rxeq_default_set, ipath_rxeq_set, uint,
+ S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(rxeq_default_set,
+ "Which set [0..3] of Rx Equalization values is default");
+
+static int ipath_internal_presets(struct ipath_devdata *dd)
+{
+ int ret = 0;
+
+ ret = set_dds_vals(dd, dds_init_vals + DDS_3M);
+
+ if (ret < 0)
+ ipath_dev_err(dd, "Failed to set default DDS values\n");
+ ret = set_rxeq_vals(dd, ipath_rxeq_set & 3);
+ if (ret < 0)
+ ipath_dev_err(dd, "Failed to set default RXEQ values\n");
+ return ret;
+}
+
+int ipath_sd7220_presets(struct ipath_devdata *dd)
+{
+ int ret = 0;
+
+ if (!dd->ipath_presets_needed)
+ return ret;
+ dd->ipath_presets_needed = 0;
+ /* Assert uC reset, so we don't clash with it. */
+ ipath_ibsd_reset(dd, 1);
+ udelay(2);
+ ipath_sd_trimdone_monitor(dd, "link-down");
+
+ ret = ipath_internal_presets(dd);
+return ret;
+}
+
+static int ipath_sd_trimself(struct ipath_devdata *dd, int val)
+{
+ return ibsd_sto_noisy(dd, CMUCTRL5, val, 0xFF);
+}
+
+static int ipath_sd_early(struct ipath_devdata *dd)
+{
+ int ret = -1; /* Default failed */
+ int chnl;
+
+ for (chnl = 0; chnl < 4; ++chnl) {
+ ret = ibsd_sto_noisy(dd, RXHSCTRL0(chnl), 0xD4, 0xFF);
+ if (ret < 0)
+ goto bail;
+ }
+ for (chnl = 0; chnl < 4; ++chnl) {
+ ret = ibsd_sto_noisy(dd, VCDL_DAC2(chnl), 0x2D, 0xFF);
+ if (ret < 0)
+ goto bail;
+ }
+ /* more fine-tuning of what will be default */
+ for (chnl = 0; chnl < 4; ++chnl) {
+ ret = ibsd_sto_noisy(dd, VCDL_CTRL2(chnl), 3, 0xF);
+ if (ret < 0)
+ goto bail;
+ }
+ for (chnl = 0; chnl < 4; ++chnl) {
+ ret = ibsd_sto_noisy(dd, START_EQ1(chnl), 0x10, 0xFF);
+ if (ret < 0)
+ goto bail;
+ }
+ for (chnl = 0; chnl < 4; ++chnl) {
+ ret = ibsd_sto_noisy(dd, START_EQ2(chnl), 0x30, 0xFF);
+ if (ret < 0)
+ goto bail;
+ }
+bail:
+ return ret;
+}
+
+#define BACTRL(chnl) EPB_LOC(chnl, 6, 0x0E)
+#define LDOUTCTRL1(chnl) EPB_LOC(chnl, 7, 6)
+#define RXHSSTATUS(chnl) EPB_LOC(chnl, 6, 0xF)
+
+static int ipath_sd_dactrim(struct ipath_devdata *dd)
+{
+ int ret = -1; /* Default failed */
+ int chnl;
+
+ for (chnl = 0; chnl < 4; ++chnl) {
+ ret = ibsd_sto_noisy(dd, BACTRL(chnl), 0x40, 0xFF);
+ if (ret < 0)
+ goto bail;
+ }
+ for (chnl = 0; chnl < 4; ++chnl) {
+ ret = ibsd_sto_noisy(dd, LDOUTCTRL1(chnl), 0x04, 0xFF);
+ if (ret < 0)
+ goto bail;
+ }
+ for (chnl = 0; chnl < 4; ++chnl) {
+ ret = ibsd_sto_noisy(dd, RXHSSTATUS(chnl), 0x04, 0xFF);
+ if (ret < 0)
+ goto bail;
+ }
+ /*
+ * delay for max possible number of steps, with slop.
+ * Each step is about 4usec.
+ */
+ udelay(415);
+ for (chnl = 0; chnl < 4; ++chnl) {
+ ret = ibsd_sto_noisy(dd, LDOUTCTRL1(chnl), 0x00, 0xFF);
+ if (ret < 0)
+ goto bail;
+ }
+bail:
+ return ret;
+}
+
+#define RELOCK_FIRST_MS 3
+#define RXLSPPM(chan) EPB_LOC(chan, 0, 2)
+void ipath_toggle_rclkrls(struct ipath_devdata *dd)
+{
+ int loc = RXLSPPM(0) | EPB_GLOBAL_WR;
+ int ret;
+
+ ret = ibsd_mod_allchnls(dd, loc, 0, 0x80);
+ if (ret < 0)
+ ipath_dev_err(dd, "RCLKRLS failed to clear D7\n");
+ else {
+ udelay(1);
+ ibsd_mod_allchnls(dd, loc, 0x80, 0x80);
+ }
+ /* And again for good measure */
+ udelay(1);
+ ret = ibsd_mod_allchnls(dd, loc, 0, 0x80);
+ if (ret < 0)
+ ipath_dev_err(dd, "RCLKRLS failed to clear D7\n");
+ else {
+ udelay(1);
+ ibsd_mod_allchnls(dd, loc, 0x80, 0x80);
+ }
+ /* Now reset xgxs and IBC to complete the recovery */
+ dd->ipath_f_xgxs_reset(dd);
+}
+
+/*
+ * Shut down the timer that polls for relock occasions, if needed
+ * this is "hooked" from ipath_7220_quiet_serdes(), which is called
+ * just before ipath_shutdown_device() in ipath_driver.c shuts down all
+ * the other timers
+ */
+void ipath_shutdown_relock_poll(struct ipath_devdata *dd)
+{
+ struct ipath_relock *irp = &dd->ipath_relock_singleton;
+ if (atomic_read(&irp->ipath_relock_timer_active)) {
+ del_timer_sync(&irp->ipath_relock_timer);
+ atomic_set(&irp->ipath_relock_timer_active, 0);
+ }
+}
+
+static unsigned ipath_relock_by_timer = 1;
+module_param_named(relock_by_timer, ipath_relock_by_timer, uint,
+ S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(relock_by_timer, "Allow relock attempt if link not up");
+
+static void ipath_run_relock(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+ struct ipath_relock *irp = &dd->ipath_relock_singleton;
+ u64 val, ltstate;
+
+ if (!(dd->ipath_flags & IPATH_INITTED)) {
+ /* Not yet up, just reenable the timer for later */
+ irp->ipath_relock_interval = HZ;
+ mod_timer(&irp->ipath_relock_timer, jiffies + HZ);
+ return;
+ }
+
+ /*
+ * Check link-training state for "stuck" state.
+ * if found, try relock and schedule another try at
+ * exponentially growing delay, maxed at one second.
+ * if not stuck, our work is done.
+ */
+ val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
+ ltstate = ipath_ib_linktrstate(dd, val);
+
+ if (ltstate <= INFINIPATH_IBCS_LT_STATE_CFGWAITRMT
+ && ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
+ int timeoff;
+ /* Not up yet. Try again, if allowed by module-param */
+ if (ipath_relock_by_timer) {
+ if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG)
+ ipath_cdbg(VERBOSE, "Skip RELOCK in AUTONEG\n");
+ else if (!(dd->ipath_flags & IPATH_IB_LINK_DISABLED)) {
+ ipath_cdbg(VERBOSE, "RELOCK\n");
+ ipath_toggle_rclkrls(dd);
+ }
+ }
+ /* re-set timer for next check */
+ timeoff = irp->ipath_relock_interval << 1;
+ if (timeoff > HZ)
+ timeoff = HZ;
+ irp->ipath_relock_interval = timeoff;
+
+ mod_timer(&irp->ipath_relock_timer, jiffies + timeoff);
+ } else {
+ /* Up, so no more need to check so often */
+ mod_timer(&irp->ipath_relock_timer, jiffies + HZ);
+ }
+}
+
+void ipath_set_relock_poll(struct ipath_devdata *dd, int ibup)
+{
+ struct ipath_relock *irp = &dd->ipath_relock_singleton;
+
+ if (ibup > 0) {
+ /* we are now up, so relax timer to 1 second interval */
+ if (atomic_read(&irp->ipath_relock_timer_active))
+ mod_timer(&irp->ipath_relock_timer, jiffies + HZ);
+ } else {
+ /* Transition to down, (re-)set timer to short interval. */
+ int timeout;
+ timeout = (HZ * ((ibup == -1) ? 1000 : RELOCK_FIRST_MS))/1000;
+ if (timeout == 0)
+ timeout = 1;
+ /* If timer has not yet been started, do so. */
+ if (atomic_inc_return(&irp->ipath_relock_timer_active) == 1) {
+ init_timer(&irp->ipath_relock_timer);
+ irp->ipath_relock_timer.function = ipath_run_relock;
+ irp->ipath_relock_timer.data = (unsigned long) dd;
+ irp->ipath_relock_interval = timeout;
+ irp->ipath_relock_timer.expires = jiffies + timeout;
+ add_timer(&irp->ipath_relock_timer);
+ } else {
+ irp->ipath_relock_interval = timeout;
+ mod_timer(&irp->ipath_relock_timer, jiffies + timeout);
+ atomic_dec(&irp->ipath_relock_timer_active);
+ }
+ }
+}
+
diff --git a/drivers/infiniband/hw/ipath/ipath_sd7220_img.c b/drivers/infiniband/hw/ipath/ipath_sd7220_img.c
new file mode 100644
index 0000000..5ef59da
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_sd7220_img.c
@@ -0,0 +1,1082 @@
+/*
+ * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/*
+ * This file contains the memory image from the vendor, to be copied into
+ * the IB SERDES of the IBA7220 during initialization.
+ * The file also includes the two functions which use this image.
+ */
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "ipath_kernel.h"
+#include "ipath_registers.h"
+#include "ipath_7220.h"
+
+static unsigned char ipath_sd7220_ib_img[] = {
+/*0000*/0x02, 0x0A, 0x29, 0x02, 0x0A, 0x87, 0xE5, 0xE6,
+ 0x30, 0xE6, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
+/*0010*/0x00, 0xE5, 0xE2, 0x30, 0xE4, 0x04, 0x7E, 0x01,
+ 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x08,
+/*0020*/0x53, 0xF9, 0xF7, 0xE4, 0xF5, 0xFE, 0x80, 0x08,
+ 0x7F, 0x0A, 0x12, 0x17, 0x31, 0x12, 0x0E, 0xA2,
+/*0030*/0x75, 0xFC, 0x08, 0xE4, 0xF5, 0xFD, 0xE5, 0xE7,
+ 0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0x22, 0x00,
+/*0040*/0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x75,
+ 0x51, 0x01, 0xE4, 0xF5, 0x52, 0xF5, 0x53, 0xF5,
+/*0050*/0x52, 0xF5, 0x7E, 0x7F, 0x04, 0x02, 0x04, 0x38,
+ 0xC2, 0x36, 0x05, 0x52, 0xE5, 0x52, 0xD3, 0x94,
+/*0060*/0x0C, 0x40, 0x05, 0x75, 0x52, 0x01, 0xD2, 0x36,
+ 0x90, 0x07, 0x0C, 0x74, 0x07, 0xF0, 0xA3, 0x74,
+/*0070*/0xFF, 0xF0, 0xE4, 0xF5, 0x0C, 0xA3, 0xF0, 0x90,
+ 0x07, 0x14, 0xF0, 0xA3, 0xF0, 0x75, 0x0B, 0x20,
+/*0080*/0xF5, 0x09, 0xE4, 0xF5, 0x08, 0xE5, 0x08, 0xD3,
+ 0x94, 0x30, 0x40, 0x03, 0x02, 0x04, 0x04, 0x12,
+/*0090*/0x00, 0x06, 0x15, 0x0B, 0xE5, 0x08, 0x70, 0x04,
+ 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x09,
+/*00A0*/0x70, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00,
+ 0xEE, 0x5F, 0x60, 0x05, 0x12, 0x18, 0x71, 0xD2,
+/*00B0*/0x35, 0x53, 0xE1, 0xF7, 0xE5, 0x08, 0x45, 0x09,
+ 0xFF, 0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24,
+/*00C0*/0x83, 0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83,
+ 0xEF, 0xF0, 0x85, 0xE2, 0x20, 0xE5, 0x52, 0xD3,
+/*00D0*/0x94, 0x01, 0x40, 0x0D, 0x12, 0x19, 0xF3, 0xE0,
+ 0x54, 0xA0, 0x64, 0x40, 0x70, 0x03, 0x02, 0x03,
+/*00E0*/0xFB, 0x53, 0xF9, 0xF8, 0x90, 0x94, 0x70, 0xE4,
+ 0xF0, 0xE0, 0xF5, 0x10, 0xAF, 0x09, 0x12, 0x1E,
+/*00F0*/0xB3, 0xAF, 0x08, 0xEF, 0x44, 0x08, 0xF5, 0x82,
+ 0x75, 0x83, 0x80, 0xE0, 0xF5, 0x29, 0xEF, 0x44,
+/*0100*/0x07, 0x12, 0x1A, 0x3C, 0xF5, 0x22, 0x54, 0x40,
+ 0xD3, 0x94, 0x00, 0x40, 0x1E, 0xE5, 0x29, 0x54,
+/*0110*/0xF0, 0x70, 0x21, 0x12, 0x19, 0xF3, 0xE0, 0x44,
+ 0x80, 0xF0, 0xE5, 0x22, 0x54, 0x30, 0x65, 0x08,
+/*0120*/0x70, 0x09, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xBF,
+ 0xF0, 0x80, 0x09, 0x12, 0x19, 0xF3, 0x74, 0x40,
+/*0130*/0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12, 0x75,
+ 0x83, 0xAE, 0x74, 0xFF, 0xF0, 0xAF, 0x08, 0x7E,
+/*0140*/0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0xE0, 0xFD,
+ 0xE5, 0x0B, 0x25, 0xE0, 0x25, 0xE0, 0x24, 0x81,
+/*0150*/0xF5, 0x82, 0xE4, 0x34, 0x07, 0xF5, 0x83, 0xED,
+ 0xF0, 0x90, 0x07, 0x0E, 0xE0, 0x04, 0xF0, 0xEF,
+/*0160*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0x98, 0xE0,
+ 0xF5, 0x28, 0x12, 0x1A, 0x23, 0x40, 0x0C, 0x12,
+/*0170*/0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12, 0x1A, 0x32,
+ 0x02, 0x03, 0xF6, 0xAF, 0x08, 0x7E, 0x00, 0x74,
+/*0180*/0x80, 0xCD, 0xEF, 0xCD, 0x8D, 0x82, 0xF5, 0x83,
+ 0xE0, 0x30, 0xE0, 0x0A, 0x12, 0x19, 0xF3, 0xE0,
+/*0190*/0x44, 0x20, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x19,
+ 0xF3, 0xE0, 0x54, 0xDF, 0xF0, 0xEE, 0x44, 0xAE,
+/*01A0*/0x12, 0x1A, 0x43, 0x30, 0xE4, 0x03, 0x02, 0x03,
+ 0xFB, 0x74, 0x9E, 0x12, 0x1A, 0x05, 0x20, 0xE0,
+/*01B0*/0x03, 0x02, 0x03, 0xFB, 0x8F, 0x82, 0x8E, 0x83,
+ 0xE0, 0x20, 0xE0, 0x03, 0x02, 0x03, 0xFB, 0x12,
+/*01C0*/0x19, 0xF3, 0xE0, 0x44, 0x10, 0xF0, 0xE5, 0xE3,
+ 0x20, 0xE7, 0x08, 0xE5, 0x08, 0x12, 0x1A, 0x3A,
+/*01D0*/0x44, 0x04, 0xF0, 0xAF, 0x08, 0x7E, 0x00, 0xEF,
+ 0x12, 0x1A, 0x3A, 0x20, 0xE2, 0x34, 0x12, 0x19,
+/*01E0*/0xF3, 0xE0, 0x44, 0x08, 0xF0, 0xE5, 0xE4, 0x30,
+ 0xE6, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00,
+/*01F0*/0xE5, 0x7E, 0xC3, 0x94, 0x04, 0x50, 0x04, 0x7C,
+ 0x01, 0x80, 0x02, 0x7C, 0x00, 0xEC, 0x4D, 0x60,
+/*0200*/0x05, 0xC2, 0x35, 0x02, 0x03, 0xFB, 0xEE, 0x44,
+ 0xD2, 0x12, 0x1A, 0x43, 0x44, 0x40, 0xF0, 0x02,
+/*0210*/0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xF7,
+ 0xF0, 0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0,
+/*0220*/0x54, 0xBF, 0xF0, 0x90, 0x07, 0x14, 0xE0, 0x04,
+ 0xF0, 0xE5, 0x7E, 0x70, 0x03, 0x75, 0x7E, 0x01,
+/*0230*/0xAF, 0x08, 0x7E, 0x00, 0x12, 0x1A, 0x23, 0x40,
+ 0x12, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x01, 0x12,
+/*0240*/0x19, 0xF2, 0xE0, 0x54, 0x02, 0x12, 0x1A, 0x32,
+ 0x02, 0x03, 0xFB, 0x12, 0x19, 0xF3, 0xE0, 0x44,
+/*0250*/0x02, 0x12, 0x19, 0xF2, 0xE0, 0x54, 0xFE, 0xF0,
+ 0xC2, 0x35, 0xEE, 0x44, 0x8A, 0x8F, 0x82, 0xF5,
+/*0260*/0x83, 0xE0, 0xF5, 0x17, 0x54, 0x8F, 0x44, 0x40,
+ 0xF0, 0x74, 0x90, 0xFC, 0xE5, 0x08, 0x44, 0x07,
+/*0270*/0xFD, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0x54, 0x3F,
+ 0x90, 0x07, 0x02, 0xF0, 0xE0, 0x54, 0xC0, 0x8D,
+/*0280*/0x82, 0x8C, 0x83, 0xF0, 0x74, 0x92, 0x12, 0x1A,
+ 0x05, 0x90, 0x07, 0x03, 0x12, 0x1A, 0x19, 0x74,
+/*0290*/0x82, 0x12, 0x1A, 0x05, 0x90, 0x07, 0x04, 0x12,
+ 0x1A, 0x19, 0x74, 0xB4, 0x12, 0x1A, 0x05, 0x90,
+/*02A0*/0x07, 0x05, 0x12, 0x1A, 0x19, 0x74, 0x94, 0xFE,
+ 0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A, 0xF5,
+/*02B0*/0x10, 0x30, 0xE0, 0x04, 0xD2, 0x37, 0x80, 0x02,
+ 0xC2, 0x37, 0xE5, 0x10, 0x54, 0x7F, 0x8F, 0x82,
+/*02C0*/0x8E, 0x83, 0xF0, 0x30, 0x44, 0x30, 0x12, 0x1A,
+ 0x03, 0x54, 0x80, 0xD3, 0x94, 0x00, 0x40, 0x04,
+/*02D0*/0xD2, 0x39, 0x80, 0x02, 0xC2, 0x39, 0x8F, 0x82,
+ 0x8E, 0x83, 0xE0, 0x44, 0x80, 0xF0, 0x12, 0x1A,
+/*02E0*/0x03, 0x54, 0x40, 0xD3, 0x94, 0x00, 0x40, 0x04,
+ 0xD2, 0x3A, 0x80, 0x02, 0xC2, 0x3A, 0x8F, 0x82,
+/*02F0*/0x8E, 0x83, 0xE0, 0x44, 0x40, 0xF0, 0x74, 0x92,
+ 0xFE, 0xE5, 0x08, 0x44, 0x06, 0x12, 0x1A, 0x0A,
+/*0300*/0x30, 0xE7, 0x04, 0xD2, 0x38, 0x80, 0x02, 0xC2,
+ 0x38, 0x8F, 0x82, 0x8E, 0x83, 0xE0, 0x54, 0x7F,
+/*0310*/0xF0, 0x12, 0x1E, 0x46, 0xE4, 0xF5, 0x0A, 0x20,
+ 0x03, 0x02, 0x80, 0x03, 0x30, 0x43, 0x03, 0x12,
+/*0320*/0x19, 0x95, 0x20, 0x02, 0x02, 0x80, 0x03, 0x30,
+ 0x42, 0x03, 0x12, 0x0C, 0x8F, 0x30, 0x30, 0x06,
+/*0330*/0x12, 0x19, 0x95, 0x12, 0x0C, 0x8F, 0x12, 0x0D,
+ 0x47, 0x12, 0x19, 0xF3, 0xE0, 0x54, 0xFB, 0xF0,
+/*0340*/0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40, 0x46, 0x43,
+ 0xE1, 0x08, 0x12, 0x19, 0xF3, 0xE0, 0x44, 0x04,
+/*0350*/0xF0, 0xE5, 0xE4, 0x20, 0xE7, 0x2A, 0x12, 0x1A,
+ 0x12, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3,
+/*0360*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
+ 0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40,
+/*0370*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF,
+ 0x5E, 0x60, 0x05, 0x12, 0x1D, 0xD7, 0x80, 0x17,
+/*0380*/0x12, 0x1A, 0x12, 0x75, 0x83, 0xD2, 0xE0, 0x44,
+ 0x08, 0xF0, 0x02, 0x03, 0xFB, 0x12, 0x1A, 0x12,
+/*0390*/0x75, 0x83, 0xD2, 0xE0, 0x54, 0xF7, 0xF0, 0x12,
+ 0x1E, 0x46, 0x7F, 0x08, 0x12, 0x17, 0x31, 0x74,
+/*03A0*/0x8E, 0xFE, 0x12, 0x1A, 0x12, 0x8E, 0x83, 0xE0,
+ 0xF5, 0x10, 0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44,
+/*03B0*/0x01, 0xFF, 0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07,
+ 0xF5, 0x82, 0xEF, 0xF0, 0xE5, 0x10, 0x54, 0xFE,
+/*03C0*/0xFF, 0xED, 0x44, 0x07, 0xF5, 0x82, 0xEF, 0x12,
+ 0x1A, 0x11, 0x75, 0x83, 0x86, 0xE0, 0x44, 0x10,
+/*03D0*/0x12, 0x1A, 0x11, 0xE0, 0x44, 0x10, 0xF0, 0x12,
+ 0x19, 0xF3, 0xE0, 0x54, 0xFD, 0x44, 0x01, 0xFF,
+/*03E0*/0x12, 0x19, 0xF3, 0xEF, 0x12, 0x1A, 0x32, 0x30,
+ 0x32, 0x0C, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82,
+/*03F0*/0x75, 0x83, 0x82, 0x74, 0x05, 0xF0, 0xAF, 0x0B,
+ 0x12, 0x18, 0xD7, 0x74, 0x10, 0x25, 0x08, 0xF5,
+/*0400*/0x08, 0x02, 0x00, 0x85, 0x05, 0x09, 0xE5, 0x09,
+ 0xD3, 0x94, 0x07, 0x50, 0x03, 0x02, 0x00, 0x82,
+/*0410*/0xE5, 0x7E, 0xD3, 0x94, 0x00, 0x40, 0x04, 0x7F,
+ 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x7E, 0xC3,
+/*0420*/0x94, 0xFA, 0x50, 0x04, 0x7E, 0x01, 0x80, 0x02,
+ 0x7E, 0x00, 0xEE, 0x5F, 0x60, 0x02, 0x05, 0x7E,
+/*0430*/0x30, 0x35, 0x0B, 0x43, 0xE1, 0x01, 0x7F, 0x09,
+ 0x12, 0x17, 0x31, 0x02, 0x00, 0x58, 0x53, 0xE1,
+/*0440*/0xFE, 0x02, 0x00, 0x58, 0x8E, 0x6A, 0x8F, 0x6B,
+ 0x8C, 0x6C, 0x8D, 0x6D, 0x75, 0x6E, 0x01, 0x75,
+/*0450*/0x6F, 0x01, 0x75, 0x70, 0x01, 0xE4, 0xF5, 0x73,
+ 0xF5, 0x74, 0xF5, 0x75, 0x90, 0x07, 0x2F, 0xF0,
+/*0460*/0xF5, 0x3C, 0xF5, 0x3E, 0xF5, 0x46, 0xF5, 0x47,
+ 0xF5, 0x3D, 0xF5, 0x3F, 0xF5, 0x6F, 0xE5, 0x6F,
+/*0470*/0x70, 0x0F, 0xE5, 0x6B, 0x45, 0x6A, 0x12, 0x07,
+ 0x2A, 0x75, 0x83, 0x80, 0x74, 0x3A, 0xF0, 0x80,
+/*0480*/0x09, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74,
+ 0x1A, 0xF0, 0xE4, 0xF5, 0x6E, 0xC3, 0x74, 0x3F,
+/*0490*/0x95, 0x6E, 0xFF, 0x12, 0x08, 0x65, 0x75, 0x83,
+ 0x82, 0xEF, 0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x08,
+/*04A0*/0xC6, 0xE5, 0x33, 0xF0, 0x12, 0x08, 0xFA, 0x12,
+ 0x08, 0xB1, 0x40, 0xE1, 0xE5, 0x6F, 0x70, 0x0B,
+/*04B0*/0x12, 0x07, 0x2A, 0x75, 0x83, 0x80, 0x74, 0x36,
+ 0xF0, 0x80, 0x09, 0x12, 0x07, 0x2A, 0x75, 0x83,
+/*04C0*/0x80, 0x74, 0x16, 0xF0, 0x75, 0x6E, 0x01, 0x12,
+ 0x07, 0x2A, 0x75, 0x83, 0xB4, 0xE5, 0x6E, 0xF0,
+/*04D0*/0x12, 0x1A, 0x4D, 0x74, 0x3F, 0x25, 0x6E, 0xF5,
+ 0x82, 0xE4, 0x34, 0x00, 0xF5, 0x83, 0xE5, 0x33,
+/*04E0*/0xF0, 0x74, 0xBF, 0x25, 0x6E, 0xF5, 0x82, 0xE4,
+ 0x34, 0x00, 0x12, 0x08, 0xB1, 0x40, 0xD8, 0xE4,
+/*04F0*/0xF5, 0x70, 0xF5, 0x46, 0xF5, 0x47, 0xF5, 0x6E,
+ 0x12, 0x08, 0xFA, 0xF5, 0x83, 0xE0, 0xFE, 0x12,
+/*0500*/0x08, 0xC6, 0xE0, 0x7C, 0x00, 0x24, 0x00, 0xFF,
+ 0xEC, 0x3E, 0xFE, 0xAD, 0x3B, 0xD3, 0xEF, 0x9D,
+/*0510*/0xEE, 0x9C, 0x50, 0x04, 0x7B, 0x01, 0x80, 0x02,
+ 0x7B, 0x00, 0xE5, 0x70, 0x70, 0x04, 0x7A, 0x01,
+/*0520*/0x80, 0x02, 0x7A, 0x00, 0xEB, 0x5A, 0x60, 0x06,
+ 0x85, 0x6E, 0x46, 0x75, 0x70, 0x01, 0xD3, 0xEF,
+/*0530*/0x9D, 0xEE, 0x9C, 0x50, 0x04, 0x7F, 0x01, 0x80,
+ 0x02, 0x7F, 0x00, 0xE5, 0x70, 0xB4, 0x01, 0x04,
+/*0540*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF, 0x5E,
+ 0x60, 0x03, 0x85, 0x6E, 0x47, 0x05, 0x6E, 0xE5,
+/*0550*/0x6E, 0x64, 0x7F, 0x70, 0xA3, 0xE5, 0x46, 0x60,
+ 0x05, 0xE5, 0x47, 0xB4, 0x7E, 0x03, 0x85, 0x46,
+/*0560*/0x47, 0xE5, 0x6F, 0x70, 0x08, 0x85, 0x46, 0x76,
+ 0x85, 0x47, 0x77, 0x80, 0x0E, 0xC3, 0x74, 0x7F,
+/*0570*/0x95, 0x46, 0xF5, 0x78, 0xC3, 0x74, 0x7F, 0x95,
+ 0x47, 0xF5, 0x79, 0xE5, 0x6F, 0x70, 0x37, 0xE5,
+/*0580*/0x46, 0x65, 0x47, 0x70, 0x0C, 0x75, 0x73, 0x01,
+ 0x75, 0x74, 0x01, 0xF5, 0x3C, 0xF5, 0x3D, 0x80,
+/*0590*/0x35, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5, 0x47, 0x95,
+ 0x46, 0xF5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25,
+/*05A0*/0x46, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05,
+ 0xE4, 0xF5, 0x3D, 0x80, 0x40, 0xC3, 0x74, 0x3F,
+/*05B0*/0x95, 0x72, 0xF5, 0x3D, 0x80, 0x37, 0xE5, 0x46,
+ 0x65, 0x47, 0x70, 0x0F, 0x75, 0x73, 0x01, 0x75,
+/*05C0*/0x75, 0x01, 0xF5, 0x3E, 0xF5, 0x3F, 0x75, 0x4E,
+ 0x01, 0x80, 0x22, 0xE4, 0xF5, 0x4E, 0xC3, 0xE5,
+/*05D0*/0x47, 0x95, 0x46, 0xF5, 0x3E, 0xC3, 0x13, 0xF5,
+ 0x71, 0x25, 0x46, 0xF5, 0x72, 0xD3, 0x94, 0x3F,
+/*05E0*/0x50, 0x05, 0xE4, 0xF5, 0x3F, 0x80, 0x06, 0xE5,
+ 0x72, 0x24, 0xC1, 0xF5, 0x3F, 0x05, 0x6F, 0xE5,
+/*05F0*/0x6F, 0xC3, 0x94, 0x02, 0x50, 0x03, 0x02, 0x04,
+ 0x6E, 0xE5, 0x6D, 0x45, 0x6C, 0x70, 0x02, 0x80,
+/*0600*/0x04, 0xE5, 0x74, 0x45, 0x75, 0x90, 0x07, 0x2F,
+ 0xF0, 0x7F, 0x01, 0xE5, 0x3E, 0x60, 0x04, 0xE5,
+/*0610*/0x3C, 0x70, 0x14, 0xE4, 0xF5, 0x3C, 0xF5, 0x3D,
+ 0xF5, 0x3E, 0xF5, 0x3F, 0x12, 0x08, 0xD2, 0x70,
+/*0620*/0x04, 0xF0, 0x02, 0x06, 0xA4, 0x80, 0x7A, 0xE5,
+ 0x3C, 0xC3, 0x95, 0x3E, 0x40, 0x07, 0xE5, 0x3C,
+/*0630*/0x95, 0x3E, 0xFF, 0x80, 0x06, 0xC3, 0xE5, 0x3E,
+ 0x95, 0x3C, 0xFF, 0xE5, 0x76, 0xD3, 0x95, 0x79,
+/*0640*/0x40, 0x05, 0x85, 0x76, 0x7A, 0x80, 0x03, 0x85,
+ 0x79, 0x7A, 0xE5, 0x77, 0xC3, 0x95, 0x78, 0x50,
+/*0650*/0x05, 0x85, 0x77, 0x7B, 0x80, 0x03, 0x85, 0x78,
+ 0x7B, 0xE5, 0x7B, 0xD3, 0x95, 0x7A, 0x40, 0x30,
+/*0660*/0xE5, 0x7B, 0x95, 0x7A, 0xF5, 0x3C, 0xF5, 0x3E,
+ 0xC3, 0xE5, 0x7B, 0x95, 0x7A, 0x90, 0x07, 0x19,
+/*0670*/0xF0, 0xE5, 0x3C, 0xC3, 0x13, 0xF5, 0x71, 0x25,
+ 0x7A, 0xF5, 0x72, 0xC3, 0x94, 0x3F, 0x40, 0x05,
+/*0680*/0xE4, 0xF5, 0x3D, 0x80, 0x1F, 0xC3, 0x74, 0x3F,
+ 0x95, 0x72, 0xF5, 0x3D, 0xF5, 0x3F, 0x80, 0x14,
+/*0690*/0xE4, 0xF5, 0x3C, 0xF5, 0x3E, 0x90, 0x07, 0x19,
+ 0xF0, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80,
+/*06A0*/0x03, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x65, 0x75,
+ 0x83, 0xD0, 0xE0, 0x54, 0x0F, 0xFE, 0xAD, 0x3C,
+/*06B0*/0x70, 0x02, 0x7E, 0x07, 0xBE, 0x0F, 0x02, 0x7E,
+ 0x80, 0xEE, 0xFB, 0xEF, 0xD3, 0x9B, 0x74, 0x80,
+/*06C0*/0xF8, 0x98, 0x40, 0x1F, 0xE4, 0xF5, 0x3C, 0xF5,
+ 0x3E, 0x12, 0x08, 0xD2, 0x70, 0x03, 0xF0, 0x80,
+/*06D0*/0x12, 0x74, 0x01, 0xF0, 0xE5, 0x08, 0xFB, 0xEB,
+ 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xD2, 0xE0,
+/*06E0*/0x44, 0x10, 0xF0, 0xE5, 0x08, 0xFB, 0xEB, 0x44,
+ 0x09, 0xF5, 0x82, 0x75, 0x83, 0x9E, 0xED, 0xF0,
+/*06F0*/0xEB, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xCA,
+ 0xED, 0xF0, 0x12, 0x08, 0x65, 0x75, 0x83, 0xCC,
+/*0700*/0xEF, 0xF0, 0x22, 0xE5, 0x08, 0x44, 0x07, 0xF5,
+ 0x82, 0x75, 0x83, 0xBC, 0xE0, 0x54, 0xF0, 0xF0,
+/*0710*/0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82, 0x75, 0x83,
+ 0xBE, 0xE0, 0x54, 0xF0, 0xF0, 0xE5, 0x08, 0x44,
+/*0720*/0x07, 0xF5, 0x82, 0x75, 0x83, 0xC0, 0xE0, 0x54,
+ 0xF0, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82,
+/*0730*/0x22, 0xF0, 0x90, 0x07, 0x28, 0xE0, 0xFE, 0xA3,
+ 0xE0, 0xF5, 0x82, 0x8E, 0x83, 0x22, 0x85, 0x42,
+/*0740*/0x42, 0x85, 0x41, 0x41, 0x85, 0x40, 0x40, 0x74,
+ 0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E, 0xF5,
+/*0750*/0x83, 0xE5, 0x42, 0xF0, 0x74, 0xE0, 0x2F, 0xF5,
+ 0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xE5,
+/*0760*/0x42, 0x29, 0xFD, 0xE4, 0x33, 0xFC, 0xE5, 0x3C,
+ 0xC3, 0x9D, 0xEC, 0x64, 0x80, 0xF8, 0x74, 0x80,
+/*0770*/0x98, 0x22, 0xF5, 0x83, 0xE0, 0x90, 0x07, 0x22,
+ 0x54, 0x1F, 0xFD, 0xE0, 0xFA, 0xA3, 0xE0, 0xF5,
+/*0780*/0x82, 0x8A, 0x83, 0xED, 0xF0, 0x22, 0x90, 0x07,
+ 0x22, 0xE0, 0xFC, 0xA3, 0xE0, 0xF5, 0x82, 0x8C,
+/*0790*/0x83, 0x22, 0x90, 0x07, 0x24, 0xFF, 0xED, 0x44,
+ 0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22, 0x85,
+/*07A0*/0x38, 0x38, 0x85, 0x39, 0x39, 0x85, 0x3A, 0x3A,
+ 0x74, 0xC0, 0x2F, 0xF5, 0x82, 0x74, 0x02, 0x3E,
+/*07B0*/0xF5, 0x83, 0x22, 0x90, 0x07, 0x26, 0xFF, 0xED,
+ 0x44, 0x07, 0xCF, 0xF0, 0xA3, 0xEF, 0xF0, 0x22,
+/*07C0*/0xF0, 0x74, 0xA0, 0x2F, 0xF5, 0x82, 0x74, 0x02,
+ 0x3E, 0xF5, 0x83, 0x22, 0x74, 0xC0, 0x25, 0x11,
+/*07D0*/0xF5, 0x82, 0xE4, 0x34, 0x01, 0xF5, 0x83, 0x22,
+ 0x74, 0x00, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
+/*07E0*/0x02, 0xF5, 0x83, 0x22, 0x74, 0x60, 0x25, 0x11,
+ 0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22,
+/*07F0*/0x74, 0x80, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
+ 0x03, 0xF5, 0x83, 0x22, 0x74, 0xE0, 0x25, 0x11,
+/*0800*/0xF5, 0x82, 0xE4, 0x34, 0x03, 0xF5, 0x83, 0x22,
+ 0x74, 0x40, 0x25, 0x11, 0xF5, 0x82, 0xE4, 0x34,
+/*0810*/0x06, 0xF5, 0x83, 0x22, 0x74, 0x80, 0x2F, 0xF5,
+ 0x82, 0x74, 0x02, 0x3E, 0xF5, 0x83, 0x22, 0xAF,
+/*0820*/0x08, 0x7E, 0x00, 0xEF, 0x44, 0x07, 0xF5, 0x82,
+ 0x22, 0xF5, 0x83, 0xE5, 0x82, 0x44, 0x07, 0xF5,
+/*0830*/0x82, 0xE5, 0x40, 0xF0, 0x22, 0x74, 0x40, 0x25,
+ 0x11, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83,
+/*0840*/0x22, 0x74, 0xC0, 0x25, 0x11, 0xF5, 0x82, 0xE4,
+ 0x34, 0x03, 0xF5, 0x83, 0x22, 0x74, 0x00, 0x25,
+/*0850*/0x11, 0xF5, 0x82, 0xE4, 0x34, 0x06, 0xF5, 0x83,
+ 0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4,
+/*0860*/0x34, 0x06, 0xF5, 0x83, 0x22, 0xE5, 0x08, 0xFD,
+ 0xED, 0x44, 0x07, 0xF5, 0x82, 0x22, 0xE5, 0x41,
+/*0870*/0xF0, 0xE5, 0x65, 0x64, 0x01, 0x45, 0x64, 0x22,
+ 0x7E, 0x00, 0xFB, 0x7A, 0x00, 0xFD, 0x7C, 0x00,
+/*0880*/0x22, 0x74, 0x20, 0x25, 0x11, 0xF5, 0x82, 0xE4,
+ 0x34, 0x02, 0x22, 0x74, 0xA0, 0x25, 0x11, 0xF5,
+/*0890*/0x82, 0xE4, 0x34, 0x03, 0x22, 0x85, 0x3E, 0x42,
+ 0x85, 0x3F, 0x41, 0x8F, 0x40, 0x22, 0x85, 0x3C,
+/*08A0*/0x42, 0x85, 0x3D, 0x41, 0x8F, 0x40, 0x22, 0x75,
+ 0x45, 0x3F, 0x90, 0x07, 0x20, 0xE4, 0xF0, 0xA3,
+/*08B0*/0x22, 0xF5, 0x83, 0xE5, 0x32, 0xF0, 0x05, 0x6E,
+ 0xE5, 0x6E, 0xC3, 0x94, 0x40, 0x22, 0xF0, 0xE5,
+/*08C0*/0x08, 0x44, 0x06, 0xF5, 0x82, 0x22, 0x74, 0x00,
+ 0x25, 0x6E, 0xF5, 0x82, 0xE4, 0x34, 0x00, 0xF5,
+/*08D0*/0x83, 0x22, 0xE5, 0x6D, 0x45, 0x6C, 0x90, 0x07,
+ 0x2F, 0x22, 0xE4, 0xF9, 0xE5, 0x3C, 0xD3, 0x95,
+/*08E0*/0x3E, 0x22, 0x74, 0x80, 0x2E, 0xF5, 0x82, 0xE4,
+ 0x34, 0x02, 0xF5, 0x83, 0xE0, 0x22, 0x74, 0xA0,
+/*08F0*/0x2E, 0xF5, 0x82, 0xE4, 0x34, 0x02, 0xF5, 0x83,
+ 0xE0, 0x22, 0x74, 0x80, 0x25, 0x6E, 0xF5, 0x82,
+/*0900*/0xE4, 0x34, 0x00, 0x22, 0x25, 0x42, 0xFD, 0xE4,
+ 0x33, 0xFC, 0x22, 0x85, 0x42, 0x42, 0x85, 0x41,
+/*0910*/0x41, 0x85, 0x40, 0x40, 0x22, 0xED, 0x4C, 0x60,
+ 0x03, 0x02, 0x09, 0xE5, 0xEF, 0x4E, 0x70, 0x37,
+/*0920*/0x90, 0x07, 0x26, 0x12, 0x07, 0x89, 0xE0, 0xFD,
+ 0x12, 0x07, 0xCC, 0xED, 0xF0, 0x90, 0x07, 0x28,
+/*0930*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xD8,
+ 0xED, 0xF0, 0x12, 0x07, 0x86, 0xE0, 0x54, 0x1F,
+/*0940*/0xFD, 0x12, 0x08, 0x81, 0xF5, 0x83, 0xED, 0xF0,
+ 0x90, 0x07, 0x24, 0x12, 0x07, 0x89, 0xE0, 0x54,
+/*0950*/0x1F, 0xFD, 0x12, 0x08, 0x35, 0xED, 0xF0, 0xEF,
+ 0x64, 0x04, 0x4E, 0x70, 0x37, 0x90, 0x07, 0x26,
+/*0960*/0x12, 0x07, 0x89, 0xE0, 0xFD, 0x12, 0x07, 0xE4,
+ 0xED, 0xF0, 0x90, 0x07, 0x28, 0x12, 0x07, 0x89,
+/*0970*/0xE0, 0xFD, 0x12, 0x07, 0xF0, 0xED, 0xF0, 0x12,
+ 0x07, 0x86, 0xE0, 0x54, 0x1F, 0xFD, 0x12, 0x08,
+/*0980*/0x8B, 0xF5, 0x83, 0xED, 0xF0, 0x90, 0x07, 0x24,
+ 0x12, 0x07, 0x89, 0xE0, 0x54, 0x1F, 0xFD, 0x12,
+/*0990*/0x08, 0x41, 0xED, 0xF0, 0xEF, 0x64, 0x01, 0x4E,
+ 0x70, 0x04, 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00,
+/*09A0*/0xEF, 0x64, 0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01,
+ 0x80, 0x02, 0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x78,
+/*09B0*/0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE0, 0xFF,
+ 0x12, 0x07, 0xFC, 0xEF, 0x12, 0x07, 0x31, 0xE0,
+/*09C0*/0xFF, 0x12, 0x08, 0x08, 0xEF, 0xF0, 0x90, 0x07,
+ 0x22, 0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF,
+/*09D0*/0x12, 0x08, 0x4D, 0xEF, 0xF0, 0x90, 0x07, 0x24,
+ 0x12, 0x07, 0x35, 0xE0, 0x54, 0x1F, 0xFF, 0x12,
+/*09E0*/0x08, 0x59, 0xEF, 0xF0, 0x22, 0x12, 0x07, 0xCC,
+ 0xE4, 0xF0, 0x12, 0x07, 0xD8, 0xE4, 0xF0, 0x12,
+/*09F0*/0x08, 0x81, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08,
+ 0x35, 0x74, 0x14, 0xF0, 0x12, 0x07, 0xE4, 0xE4,
+/*0A00*/0xF0, 0x12, 0x07, 0xF0, 0xE4, 0xF0, 0x12, 0x08,
+ 0x8B, 0xF5, 0x83, 0xE4, 0xF0, 0x12, 0x08, 0x41,
+/*0A10*/0x74, 0x14, 0xF0, 0x12, 0x07, 0xFC, 0xE4, 0xF0,
+ 0x12, 0x08, 0x08, 0xE4, 0xF0, 0x12, 0x08, 0x4D,
+/*0A20*/0xE4, 0xF0, 0x12, 0x08, 0x59, 0x74, 0x14, 0xF0,
+ 0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFC, 0x10, 0xE4,
+/*0A30*/0xF5, 0xFD, 0x75, 0xFE, 0x30, 0xF5, 0xFF, 0xE5,
+ 0xE7, 0x20, 0xE7, 0x03, 0x43, 0xF9, 0x08, 0xE5,
+/*0A40*/0xE6, 0x20, 0xE7, 0x0B, 0x78, 0xFF, 0xE4, 0xF6,
+ 0xD8, 0xFD, 0x53, 0xE6, 0xFE, 0x80, 0x09, 0x78,
+/*0A50*/0x08, 0xE4, 0xF6, 0xD8, 0xFD, 0x53, 0xE6, 0xFE,
+ 0x75, 0x81, 0x80, 0xE4, 0xF5, 0xA8, 0xD2, 0xA8,
+/*0A60*/0xC2, 0xA9, 0xD2, 0xAF, 0xE5, 0xE2, 0x20, 0xE5,
+ 0x05, 0x20, 0xE6, 0x02, 0x80, 0x03, 0x43, 0xE1,
+/*0A70*/0x02, 0xE5, 0xE2, 0x20, 0xE0, 0x0E, 0x90, 0x00,
+ 0x00, 0x7F, 0x00, 0x7E, 0x08, 0xE4, 0xF0, 0xA3,
+/*0A80*/0xDF, 0xFC, 0xDE, 0xFA, 0x02, 0x0A, 0xDB, 0x43,
+ 0xFA, 0x01, 0xC0, 0xE0, 0xC0, 0xF0, 0xC0, 0x83,
+/*0A90*/0xC0, 0x82, 0xC0, 0xD0, 0x12, 0x1C, 0xE7, 0xD0,
+ 0xD0, 0xD0, 0x82, 0xD0, 0x83, 0xD0, 0xF0, 0xD0,
+/*0AA0*/0xE0, 0x53, 0xFA, 0xFE, 0x32, 0x02, 0x1B, 0x55,
+ 0xE4, 0x93, 0xA3, 0xF8, 0xE4, 0x93, 0xA3, 0xF6,
+/*0AB0*/0x08, 0xDF, 0xF9, 0x80, 0x29, 0xE4, 0x93, 0xA3,
+ 0xF8, 0x54, 0x07, 0x24, 0x0C, 0xC8, 0xC3, 0x33,
+/*0AC0*/0xC4, 0x54, 0x0F, 0x44, 0x20, 0xC8, 0x83, 0x40,
+ 0x04, 0xF4, 0x56, 0x80, 0x01, 0x46, 0xF6, 0xDF,
+/*0AD0*/0xE4, 0x80, 0x0B, 0x01, 0x02, 0x04, 0x08, 0x10,
+ 0x20, 0x40, 0x80, 0x90, 0x00, 0x3F, 0xE4, 0x7E,
+/*0AE0*/0x01, 0x93, 0x60, 0xC1, 0xA3, 0xFF, 0x54, 0x3F,
+ 0x30, 0xE5, 0x09, 0x54, 0x1F, 0xFE, 0xE4, 0x93,
+/*0AF0*/0xA3, 0x60, 0x01, 0x0E, 0xCF, 0x54, 0xC0, 0x25,
+ 0xE0, 0x60, 0xAD, 0x40, 0xB8, 0x80, 0xFE, 0x8C,
+/*0B00*/0x64, 0x8D, 0x65, 0x8A, 0x66, 0x8B, 0x67, 0xE4,
+ 0xF5, 0x69, 0xEF, 0x4E, 0x70, 0x03, 0x02, 0x1D,
+/*0B10*/0x55, 0xE4, 0xF5, 0x68, 0xE5, 0x67, 0x45, 0x66,
+ 0x70, 0x32, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90,
+/*0B20*/0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE4,
+ 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4, 0x12,
+/*0B30*/0x08, 0x70, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75,
+ 0x83, 0x92, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83,
+/*0B40*/0xC6, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8,
+ 0xE4, 0xF0, 0x80, 0x11, 0x90, 0x07, 0x26, 0x12,
+/*0B50*/0x07, 0x35, 0xE4, 0x12, 0x08, 0x70, 0x70, 0x05,
+ 0x12, 0x07, 0x32, 0xE4, 0xF0, 0x12, 0x1D, 0x55,
+/*0B60*/0x12, 0x1E, 0xBF, 0xE5, 0x67, 0x45, 0x66, 0x70,
+ 0x33, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x90, 0xE5,
+/*0B70*/0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5,
+ 0x41, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x12,
+/*0B80*/0x08, 0x6E, 0x70, 0x29, 0x12, 0x07, 0x2A, 0x75,
+ 0x83, 0x92, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75,
+/*0B90*/0x83, 0xC6, 0xE5, 0x40, 0x12, 0x07, 0x29, 0x75,
+ 0x83, 0xC8, 0x80, 0x0E, 0x90, 0x07, 0x26, 0x12,
+/*0BA0*/0x07, 0x35, 0x12, 0x08, 0x6E, 0x70, 0x06, 0x12,
+ 0x07, 0x32, 0xE5, 0x40, 0xF0, 0xAF, 0x69, 0x7E,
+/*0BB0*/0x00, 0xAD, 0x67, 0xAC, 0x66, 0x12, 0x04, 0x44,
+ 0x12, 0x07, 0x2A, 0x75, 0x83, 0xCA, 0xE0, 0xD3,
+/*0BC0*/0x94, 0x00, 0x50, 0x0C, 0x05, 0x68, 0xE5, 0x68,
+ 0xC3, 0x94, 0x05, 0x50, 0x03, 0x02, 0x0B, 0x14,
+/*0BD0*/0x22, 0x8C, 0x60, 0x8D, 0x61, 0x12, 0x08, 0xDA,
+ 0x74, 0x20, 0x40, 0x0D, 0x2F, 0xF5, 0x82, 0x74,
+/*0BE0*/0x03, 0x3E, 0xF5, 0x83, 0xE5, 0x3E, 0xF0, 0x80,
+ 0x0B, 0x2F, 0xF5, 0x82, 0x74, 0x03, 0x3E, 0xF5,
+/*0BF0*/0x83, 0xE5, 0x3C, 0xF0, 0xE5, 0x3C, 0xD3, 0x95,
+ 0x3E, 0x40, 0x3C, 0xE5, 0x61, 0x45, 0x60, 0x70,
+/*0C00*/0x10, 0xE9, 0x12, 0x09, 0x04, 0xE5, 0x3E, 0x12,
+ 0x07, 0x68, 0x40, 0x3B, 0x12, 0x08, 0x95, 0x80,
+/*0C10*/0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40, 0x1D,
+ 0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05, 0x85,
+/*0C20*/0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39, 0x8F,
+ 0x3A, 0x12, 0x08, 0x14, 0xE5, 0x3E, 0x12, 0x07,
+/*0C30*/0xC0, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x43, 0xE5,
+ 0x61, 0x45, 0x60, 0x70, 0x19, 0x12, 0x07, 0x5F,
+/*0C40*/0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x27, 0x12,
+ 0x09, 0x0B, 0x12, 0x08, 0x14, 0xE5, 0x42, 0x12,
+/*0C50*/0x07, 0xC0, 0xE5, 0x41, 0xF0, 0x22, 0xE5, 0x3C,
+ 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C, 0x38,
+/*0C60*/0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39, 0x80,
+ 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x08,
+/*0C70*/0x14, 0xE5, 0x3C, 0x12, 0x07, 0xC0, 0xE5, 0x3D,
+ 0xF0, 0x22, 0x85, 0x38, 0x38, 0x85, 0x39, 0x39,
+/*0C80*/0x85, 0x3A, 0x3A, 0x12, 0x08, 0x14, 0xE5, 0x38,
+ 0x12, 0x07, 0xC0, 0xE5, 0x39, 0xF0, 0x22, 0x7F,
+/*0C90*/0x06, 0x12, 0x17, 0x31, 0x12, 0x1D, 0x23, 0x12,
+ 0x0E, 0x04, 0x12, 0x0E, 0x33, 0xE0, 0x44, 0x0A,
+/*0CA0*/0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E, 0x04, 0x12,
+ 0x0E, 0x0B, 0xEF, 0xF0, 0xE5, 0x28, 0x30, 0xE5,
+/*0CB0*/0x03, 0xD3, 0x80, 0x01, 0xC3, 0x40, 0x05, 0x75,
+ 0x14, 0x20, 0x80, 0x03, 0x75, 0x14, 0x08, 0x12,
+/*0CC0*/0x0E, 0x04, 0x75, 0x83, 0x8A, 0xE5, 0x14, 0xF0,
+ 0xB4, 0xFF, 0x05, 0x75, 0x12, 0x80, 0x80, 0x06,
+/*0CD0*/0xE5, 0x14, 0xC3, 0x13, 0xF5, 0x12, 0xE4, 0xF5,
+ 0x16, 0xF5, 0x7F, 0x12, 0x19, 0x36, 0x12, 0x13,
+/*0CE0*/0xA3, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x50, 0x09,
+ 0x05, 0x16, 0xE5, 0x16, 0xC3, 0x94, 0x14, 0x40,
+/*0CF0*/0xEA, 0xE5, 0xE4, 0x20, 0xE7, 0x28, 0x12, 0x0E,
+ 0x04, 0x75, 0x83, 0xD2, 0xE0, 0x54, 0x08, 0xD3,
+/*0D00*/0x94, 0x00, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
+ 0x7F, 0x00, 0xE5, 0x0A, 0xC3, 0x94, 0x01, 0x40,
+/*0D10*/0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEF,
+ 0x5E, 0x60, 0x03, 0x12, 0x1D, 0xD7, 0xE5, 0x7F,
+/*0D20*/0xC3, 0x94, 0x11, 0x40, 0x14, 0x12, 0x0E, 0x04,
+ 0x75, 0x83, 0xD2, 0xE0, 0x44, 0x80, 0xF0, 0xE5,
+/*0D30*/0xE4, 0x20, 0xE7, 0x0F, 0x12, 0x1D, 0xD7, 0x80,
+ 0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0xD2, 0xE0,
+/*0D40*/0x54, 0x7F, 0xF0, 0x12, 0x1D, 0x23, 0x22, 0x74,
+ 0x8A, 0x85, 0x08, 0x82, 0xF5, 0x83, 0xE5, 0x17,
+/*0D50*/0xF0, 0x12, 0x0E, 0x3A, 0xE4, 0xF0, 0x90, 0x07,
+ 0x02, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x90,
+/*0D60*/0xEF, 0xF0, 0x74, 0x92, 0xFE, 0xE5, 0x08, 0x44,
+ 0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0, 0x54,
+/*0D70*/0xC0, 0xFD, 0x90, 0x07, 0x03, 0xE0, 0x54, 0x3F,
+ 0x4D, 0x8F, 0x82, 0x8E, 0x83, 0xF0, 0x90, 0x07,
+/*0D80*/0x04, 0xE0, 0x12, 0x0E, 0x17, 0x75, 0x83, 0x82,
+ 0xEF, 0xF0, 0x90, 0x07, 0x05, 0xE0, 0xFF, 0xED,
+/*0D90*/0x44, 0x07, 0xF5, 0x82, 0x75, 0x83, 0xB4, 0xEF,
+ 0x12, 0x0E, 0x03, 0x75, 0x83, 0x80, 0xE0, 0x54,
+/*0DA0*/0xBF, 0xF0, 0x30, 0x37, 0x0A, 0x12, 0x0E, 0x91,
+ 0x75, 0x83, 0x94, 0xE0, 0x44, 0x80, 0xF0, 0x30,
+/*0DB0*/0x38, 0x0A, 0x12, 0x0E, 0x91, 0x75, 0x83, 0x92,
+ 0xE0, 0x44, 0x80, 0xF0, 0xE5, 0x28, 0x30, 0xE4,
+/*0DC0*/0x1A, 0x20, 0x39, 0x0A, 0x12, 0x0E, 0x04, 0x75,
+ 0x83, 0x88, 0xE0, 0x54, 0x7F, 0xF0, 0x20, 0x3A,
+/*0DD0*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x88, 0xE0,
+ 0x54, 0xBF, 0xF0, 0x74, 0x8C, 0xFE, 0x12, 0x0E,
+/*0DE0*/0x04, 0x8E, 0x83, 0xE0, 0x54, 0x0F, 0x12, 0x0E,
+ 0x03, 0x75, 0x83, 0x86, 0xE0, 0x54, 0xBF, 0xF0,
+/*0DF0*/0xE5, 0x08, 0x44, 0x06, 0x12, 0x0D, 0xFD, 0x75,
+ 0x83, 0x8A, 0xE4, 0xF0, 0x22, 0xF5, 0x82, 0x75,
+/*0E00*/0x83, 0x82, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07,
+ 0xF5, 0x82, 0x22, 0x8E, 0x83, 0xE0, 0xF5, 0x10,
+/*0E10*/0x54, 0xFE, 0xF0, 0xE5, 0x10, 0x44, 0x01, 0xFF,
+ 0xE5, 0x08, 0xFD, 0xED, 0x44, 0x07, 0xF5, 0x82,
+/*0E20*/0x22, 0xE5, 0x15, 0xC4, 0x54, 0x07, 0xFF, 0xE5,
+ 0x08, 0xFD, 0xED, 0x44, 0x08, 0xF5, 0x82, 0x75,
+/*0E30*/0x83, 0x82, 0x22, 0x75, 0x83, 0x80, 0xE0, 0x44,
+ 0x40, 0xF0, 0xE5, 0x08, 0x44, 0x08, 0xF5, 0x82,
+/*0E40*/0x75, 0x83, 0x8A, 0x22, 0xE5, 0x16, 0x25, 0xE0,
+ 0x25, 0xE0, 0x24, 0xAF, 0xF5, 0x82, 0xE4, 0x34,
+/*0E50*/0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0D, 0x22,
+ 0x43, 0xE1, 0x10, 0x43, 0xE1, 0x80, 0x53, 0xE1,
+/*0E60*/0xFD, 0x85, 0xE1, 0x10, 0x22, 0xE5, 0x16, 0x25,
+ 0xE0, 0x25, 0xE0, 0x24, 0xB2, 0xF5, 0x82, 0xE4,
+/*0E70*/0x34, 0x1A, 0xF5, 0x83, 0xE4, 0x93, 0x22, 0x85,
+ 0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15, 0xF0,
+/*0E80*/0x22, 0xE5, 0xE2, 0x54, 0x20, 0xD3, 0x94, 0x00,
+ 0x22, 0xE5, 0xE2, 0x54, 0x40, 0xD3, 0x94, 0x00,
+/*0E90*/0x22, 0xE5, 0x08, 0x44, 0x06, 0xF5, 0x82, 0x22,
+ 0xFD, 0xE5, 0x08, 0xFB, 0xEB, 0x44, 0x07, 0xF5,
+/*0EA0*/0x82, 0x22, 0x53, 0xF9, 0xF7, 0x75, 0xFE, 0x30,
+ 0x22, 0xEF, 0x4E, 0x70, 0x26, 0x12, 0x07, 0xCC,
+/*0EB0*/0xE0, 0xFD, 0x90, 0x07, 0x26, 0x12, 0x07, 0x7B,
+ 0x12, 0x07, 0xD8, 0xE0, 0xFD, 0x90, 0x07, 0x28,
+/*0EC0*/0x12, 0x07, 0x7B, 0x12, 0x08, 0x81, 0x12, 0x07,
+ 0x72, 0x12, 0x08, 0x35, 0xE0, 0x90, 0x07, 0x24,
+/*0ED0*/0x12, 0x07, 0x78, 0xEF, 0x64, 0x04, 0x4E, 0x70,
+ 0x29, 0x12, 0x07, 0xE4, 0xE0, 0xFD, 0x90, 0x07,
+/*0EE0*/0x26, 0x12, 0x07, 0x7B, 0x12, 0x07, 0xF0, 0xE0,
+ 0xFD, 0x90, 0x07, 0x28, 0x12, 0x07, 0x7B, 0x12,
+/*0EF0*/0x08, 0x8B, 0x12, 0x07, 0x72, 0x12, 0x08, 0x41,
+ 0xE0, 0x54, 0x1F, 0xFD, 0x90, 0x07, 0x24, 0x12,
+/*0F00*/0x07, 0x7B, 0xEF, 0x64, 0x01, 0x4E, 0x70, 0x04,
+ 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0xEF, 0x64,
+/*0F10*/0x02, 0x4E, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02,
+ 0x7F, 0x00, 0xEF, 0x4D, 0x60, 0x35, 0x12, 0x07,
+/*0F20*/0xFC, 0xE0, 0xFF, 0x90, 0x07, 0x26, 0x12, 0x07,
+ 0x89, 0xEF, 0xF0, 0x12, 0x08, 0x08, 0xE0, 0xFF,
+/*0F30*/0x90, 0x07, 0x28, 0x12, 0x07, 0x89, 0xEF, 0xF0,
+ 0x12, 0x08, 0x4D, 0xE0, 0x54, 0x1F, 0xFF, 0x12,
+/*0F40*/0x07, 0x86, 0xEF, 0xF0, 0x12, 0x08, 0x59, 0xE0,
+ 0x54, 0x1F, 0xFF, 0x90, 0x07, 0x24, 0x12, 0x07,
+/*0F50*/0x89, 0xEF, 0xF0, 0x22, 0xE4, 0xF5, 0x53, 0x12,
+ 0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01, 0x80, 0x02,
+/*0F60*/0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40, 0x04, 0x7E,
+ 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x70,
+/*0F70*/0x03, 0x02, 0x0F, 0xF6, 0x85, 0xE1, 0x10, 0x43,
+ 0xE1, 0x02, 0x53, 0xE1, 0x0F, 0x85, 0xE1, 0x10,
+/*0F80*/0xE4, 0xF5, 0x51, 0xE5, 0xE3, 0x54, 0x3F, 0xF5,
+ 0x52, 0x12, 0x0E, 0x89, 0x40, 0x1D, 0xAD, 0x52,
+/*0F90*/0xAF, 0x51, 0x12, 0x11, 0x18, 0xEF, 0x60, 0x08,
+ 0x85, 0xE1, 0x10, 0x43, 0xE1, 0x40, 0x80, 0x0B,
+/*0FA0*/0x53, 0xE1, 0xBF, 0x12, 0x0E, 0x58, 0x12, 0x00,
+ 0x06, 0x80, 0xFB, 0xE5, 0xE3, 0x54, 0x3F, 0xF5,
+/*0FB0*/0x51, 0xE5, 0xE4, 0x54, 0x3F, 0xF5, 0x52, 0x12,
+ 0x0E, 0x81, 0x40, 0x1D, 0xAD, 0x52, 0xAF, 0x51,
+/*0FC0*/0x12, 0x11, 0x18, 0xEF, 0x60, 0x08, 0x85, 0xE1,
+ 0x10, 0x43, 0xE1, 0x20, 0x80, 0x0B, 0x53, 0xE1,
+/*0FD0*/0xDF, 0x12, 0x0E, 0x58, 0x12, 0x00, 0x06, 0x80,
+ 0xFB, 0x12, 0x0E, 0x81, 0x40, 0x04, 0x7F, 0x01,
+/*0FE0*/0x80, 0x02, 0x7F, 0x00, 0x12, 0x0E, 0x89, 0x40,
+ 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE,
+/*0FF0*/0x4F, 0x60, 0x03, 0x12, 0x0E, 0x5B, 0x22, 0x12,
+ 0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x22,
+/*1000*/0x02, 0x11, 0x00, 0x02, 0x10, 0x40, 0x02, 0x10,
+ 0x90, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1010*/0x01, 0x20, 0x01, 0x20, 0xE4, 0xF5, 0x57, 0x12,
+ 0x16, 0xBD, 0x12, 0x16, 0x44, 0xE4, 0x12, 0x10,
+/*1020*/0x56, 0x12, 0x14, 0xB7, 0x90, 0x07, 0x26, 0x12,
+ 0x07, 0x35, 0xE4, 0x12, 0x07, 0x31, 0xE4, 0xF0,
+/*1030*/0x12, 0x10, 0x56, 0x12, 0x14, 0xB7, 0x90, 0x07,
+ 0x26, 0x12, 0x07, 0x35, 0xE5, 0x41, 0x12, 0x07,
+/*1040*/0x31, 0xE5, 0x40, 0xF0, 0xAF, 0x57, 0x7E, 0x00,
+ 0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF,
+/*1050*/0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xFF, 0x90,
+ 0x07, 0x20, 0xA3, 0xE0, 0xFD, 0xE4, 0xF5, 0x56,
+/*1060*/0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x12,
+ 0x11, 0x51, 0x7F, 0x0F, 0x7D, 0x18, 0xE4, 0xF5,
+/*1070*/0x56, 0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA,
+ 0x12, 0x15, 0x41, 0xAF, 0x56, 0x7E, 0x00, 0x12,
+/*1080*/0x1A, 0xFF, 0xE4, 0xFF, 0xF5, 0x56, 0x7D, 0x1F,
+ 0xF5, 0x40, 0xFE, 0xFC, 0xAB, 0x56, 0xFA, 0x22,
+/*1090*/0x22, 0xE4, 0xF5, 0x55, 0xE5, 0x08, 0xFD, 0x74,
+ 0xA0, 0xF5, 0x56, 0xED, 0x44, 0x07, 0xF5, 0x57,
+/*10A0*/0xE5, 0x28, 0x30, 0xE5, 0x03, 0xD3, 0x80, 0x01,
+ 0xC3, 0x40, 0x05, 0x7F, 0x28, 0xEF, 0x80, 0x04,
+/*10B0*/0x7F, 0x14, 0xEF, 0xC3, 0x13, 0xF5, 0x54, 0xE4,
+ 0xF9, 0x12, 0x0E, 0x18, 0x75, 0x83, 0x8E, 0xE0,
+/*10C0*/0xF5, 0x10, 0xCE, 0xEF, 0xCE, 0xEE, 0xD3, 0x94,
+ 0x00, 0x40, 0x26, 0xE5, 0x10, 0x54, 0xFE, 0x12,
+/*10D0*/0x0E, 0x98, 0x75, 0x83, 0x8E, 0xED, 0xF0, 0xE5,
+ 0x10, 0x44, 0x01, 0xFD, 0xEB, 0x44, 0x07, 0xF5,
+/*10E0*/0x82, 0xED, 0xF0, 0x85, 0x57, 0x82, 0x85, 0x56,
+ 0x83, 0xE0, 0x30, 0xE3, 0x01, 0x09, 0x1E, 0x80,
+/*10F0*/0xD4, 0xC2, 0x34, 0xE9, 0xC3, 0x95, 0x54, 0x40,
+ 0x02, 0xD2, 0x34, 0x22, 0x02, 0x00, 0x06, 0x22,
+/*1100*/0x30, 0x30, 0x11, 0x90, 0x10, 0x00, 0xE4, 0x93,
+ 0xF5, 0x10, 0x90, 0x10, 0x10, 0xE4, 0x93, 0xF5,
+/*1110*/0x10, 0x12, 0x10, 0x90, 0x12, 0x11, 0x50, 0x22,
+ 0xE4, 0xFC, 0xC3, 0xED, 0x9F, 0xFA, 0xEF, 0xF5,
+/*1120*/0x83, 0x75, 0x82, 0x00, 0x79, 0xFF, 0xE4, 0x93,
+ 0xCC, 0x6C, 0xCC, 0xA3, 0xD9, 0xF8, 0xDA, 0xF6,
+/*1130*/0xE5, 0xE2, 0x30, 0xE4, 0x02, 0x8C, 0xE5, 0xED,
+ 0x24, 0xFF, 0xFF, 0xEF, 0x75, 0x82, 0xFF, 0xF5,
+/*1140*/0x83, 0xE4, 0x93, 0x6C, 0x70, 0x03, 0x7F, 0x01,
+ 0x22, 0x7F, 0x00, 0x22, 0x22, 0x11, 0x00, 0x00,
+/*1150*/0x22, 0x8E, 0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D,
+ 0x5B, 0x8A, 0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01,
+/*1160*/0xE4, 0xF5, 0x5F, 0xF5, 0x60, 0xF5, 0x62, 0x12,
+ 0x07, 0x2A, 0x75, 0x83, 0xD0, 0xE0, 0xFF, 0xC4,
+/*1170*/0x54, 0x0F, 0xF5, 0x61, 0x12, 0x1E, 0xA5, 0x85,
+ 0x59, 0x5E, 0xD3, 0xE5, 0x5E, 0x95, 0x5B, 0xE5,
+/*1180*/0x5A, 0x12, 0x07, 0x6B, 0x50, 0x4B, 0x12, 0x07,
+ 0x03, 0x75, 0x83, 0xBC, 0xE0, 0x45, 0x5E, 0x12,
+/*1190*/0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x45, 0x5E,
+ 0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0, 0x45,
+/*11A0*/0x5E, 0xF0, 0xAF, 0x5F, 0xE5, 0x60, 0x12, 0x08,
+ 0x78, 0x12, 0x0A, 0xFF, 0xAF, 0x62, 0x7E, 0x00,
+/*11B0*/0xAD, 0x5D, 0xAC, 0x5C, 0x12, 0x04, 0x44, 0xE5,
+ 0x61, 0xAF, 0x5E, 0x7E, 0x00, 0xB4, 0x03, 0x05,
+/*11C0*/0x12, 0x1E, 0x21, 0x80, 0x07, 0xAD, 0x5D, 0xAC,
+ 0x5C, 0x12, 0x13, 0x17, 0x05, 0x5E, 0x02, 0x11,
+/*11D0*/0x7A, 0x12, 0x07, 0x03, 0x75, 0x83, 0xBC, 0xE0,
+ 0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBE,
+/*11E0*/0xE0, 0x45, 0x40, 0x12, 0x07, 0x29, 0x75, 0x83,
+ 0xC0, 0xE0, 0x45, 0x40, 0xF0, 0x22, 0x8E, 0x58,
+/*11F0*/0x8F, 0x59, 0x75, 0x5A, 0x01, 0x79, 0x01, 0x75,
+ 0x5B, 0x01, 0xE4, 0xFB, 0x12, 0x07, 0x2A, 0x75,
+/*1200*/0x83, 0xAE, 0xE0, 0x54, 0x1A, 0xFF, 0x12, 0x08,
+ 0x65, 0xE0, 0xC4, 0x13, 0x54, 0x07, 0xFE, 0xEF,
+/*1210*/0x70, 0x0C, 0xEE, 0x65, 0x35, 0x70, 0x07, 0x90,
+ 0x07, 0x2F, 0xE0, 0xB4, 0x01, 0x0D, 0xAF, 0x35,
+/*1220*/0x7E, 0x00, 0x12, 0x0E, 0xA9, 0xCF, 0xEB, 0xCF,
+ 0x02, 0x1E, 0x60, 0xE5, 0x59, 0x64, 0x02, 0x45,
+/*1230*/0x58, 0x70, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F,
+ 0x00, 0xE5, 0x59, 0x45, 0x58, 0x70, 0x04, 0x7E,
+/*1240*/0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60,
+ 0x23, 0x85, 0x41, 0x49, 0x85, 0x40, 0x4B, 0xE5,
+/*1250*/0x59, 0x45, 0x58, 0x70, 0x2C, 0xAF, 0x5A, 0xFE,
+ 0xCD, 0xE9, 0xCD, 0xFC, 0xAB, 0x59, 0xAA, 0x58,
+/*1260*/0x12, 0x0A, 0xFF, 0xAF, 0x5B, 0x7E, 0x00, 0x12,
+ 0x1E, 0x60, 0x80, 0x15, 0xAF, 0x5B, 0x7E, 0x00,
+/*1270*/0x12, 0x1E, 0x60, 0x90, 0x07, 0x26, 0x12, 0x07,
+ 0x35, 0xE5, 0x49, 0x12, 0x07, 0x31, 0xE5, 0x4B,
+/*1280*/0xF0, 0xE4, 0xFD, 0xAF, 0x35, 0xFE, 0xFC, 0x12,
+ 0x09, 0x15, 0x22, 0x8C, 0x64, 0x8D, 0x65, 0x12,
+/*1290*/0x08, 0xDA, 0x40, 0x3C, 0xE5, 0x65, 0x45, 0x64,
+ 0x70, 0x10, 0x12, 0x09, 0x04, 0xC3, 0xE5, 0x3E,
+/*12A0*/0x12, 0x07, 0x69, 0x40, 0x3B, 0x12, 0x08, 0x95,
+ 0x80, 0x18, 0xE5, 0x3E, 0xC3, 0x95, 0x38, 0x40,
+/*12B0*/0x1D, 0x85, 0x3E, 0x38, 0xE5, 0x3E, 0x60, 0x05,
+ 0x85, 0x3F, 0x39, 0x80, 0x03, 0x85, 0x39, 0x39,
+/*12C0*/0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3E, 0x12,
+ 0x07, 0x53, 0xE5, 0x3F, 0xF0, 0x22, 0x80, 0x3B,
+/*12D0*/0xE5, 0x65, 0x45, 0x64, 0x70, 0x11, 0x12, 0x07,
+ 0x5F, 0x40, 0x05, 0x12, 0x08, 0x9E, 0x80, 0x1F,
+/*12E0*/0x12, 0x07, 0x3E, 0xE5, 0x41, 0xF0, 0x22, 0xE5,
+ 0x3C, 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3C,
+/*12F0*/0x38, 0xE5, 0x3C, 0x60, 0x05, 0x85, 0x3D, 0x39,
+ 0x80, 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12,
+/*1300*/0x07, 0xA8, 0xE5, 0x3C, 0x12, 0x07, 0x53, 0xE5,
+ 0x3D, 0xF0, 0x22, 0x12, 0x07, 0x9F, 0xE5, 0x38,
+/*1310*/0x12, 0x07, 0x53, 0xE5, 0x39, 0xF0, 0x22, 0x8C,
+ 0x63, 0x8D, 0x64, 0x12, 0x08, 0xDA, 0x40, 0x3C,
+/*1320*/0xE5, 0x64, 0x45, 0x63, 0x70, 0x10, 0x12, 0x09,
+ 0x04, 0xC3, 0xE5, 0x3E, 0x12, 0x07, 0x69, 0x40,
+/*1330*/0x3B, 0x12, 0x08, 0x95, 0x80, 0x18, 0xE5, 0x3E,
+ 0xC3, 0x95, 0x38, 0x40, 0x1D, 0x85, 0x3E, 0x38,
+/*1340*/0xE5, 0x3E, 0x60, 0x05, 0x85, 0x3F, 0x39, 0x80,
+ 0x03, 0x85, 0x39, 0x39, 0x8F, 0x3A, 0x12, 0x07,
+/*1350*/0xA8, 0xE5, 0x3E, 0x12, 0x07, 0x53, 0xE5, 0x3F,
+ 0xF0, 0x22, 0x80, 0x3B, 0xE5, 0x64, 0x45, 0x63,
+/*1360*/0x70, 0x11, 0x12, 0x07, 0x5F, 0x40, 0x05, 0x12,
+ 0x08, 0x9E, 0x80, 0x1F, 0x12, 0x07, 0x3E, 0xE5,
+/*1370*/0x41, 0xF0, 0x22, 0xE5, 0x3C, 0xC3, 0x95, 0x38,
+ 0x40, 0x1D, 0x85, 0x3C, 0x38, 0xE5, 0x3C, 0x60,
+/*1380*/0x05, 0x85, 0x3D, 0x39, 0x80, 0x03, 0x85, 0x39,
+ 0x39, 0x8F, 0x3A, 0x12, 0x07, 0xA8, 0xE5, 0x3C,
+/*1390*/0x12, 0x07, 0x53, 0xE5, 0x3D, 0xF0, 0x22, 0x12,
+ 0x07, 0x9F, 0xE5, 0x38, 0x12, 0x07, 0x53, 0xE5,
+/*13A0*/0x39, 0xF0, 0x22, 0xE5, 0x0D, 0xFE, 0xE5, 0x08,
+ 0x8E, 0x54, 0x44, 0x05, 0xF5, 0x55, 0x75, 0x15,
+/*13B0*/0x0F, 0xF5, 0x82, 0x12, 0x0E, 0x7A, 0x12, 0x17,
+ 0xA3, 0x20, 0x31, 0x05, 0x75, 0x15, 0x03, 0x80,
+/*13C0*/0x03, 0x75, 0x15, 0x0B, 0xE5, 0x0A, 0xC3, 0x94,
+ 0x01, 0x50, 0x38, 0x12, 0x14, 0x20, 0x20, 0x31,
+/*13D0*/0x06, 0x05, 0x15, 0x05, 0x15, 0x80, 0x04, 0x15,
+ 0x15, 0x15, 0x15, 0xE5, 0x0A, 0xC3, 0x94, 0x01,
+/*13E0*/0x50, 0x21, 0x12, 0x14, 0x20, 0x20, 0x31, 0x04,
+ 0x05, 0x15, 0x80, 0x02, 0x15, 0x15, 0xE5, 0x0A,
+/*13F0*/0xC3, 0x94, 0x01, 0x50, 0x0E, 0x12, 0x0E, 0x77,
+ 0x12, 0x17, 0xA3, 0x20, 0x31, 0x05, 0x05, 0x15,
+/*1400*/0x12, 0x0E, 0x77, 0xE5, 0x15, 0xB4, 0x08, 0x04,
+ 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x15,
+/*1410*/0xB4, 0x07, 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E,
+ 0x00, 0xEE, 0x4F, 0x60, 0x02, 0x05, 0x7F, 0x22,
+/*1420*/0x85, 0x55, 0x82, 0x85, 0x54, 0x83, 0xE5, 0x15,
+ 0xF0, 0x12, 0x17, 0xA3, 0x22, 0x12, 0x07, 0x2A,
+/*1430*/0x75, 0x83, 0xAE, 0x74, 0xFF, 0x12, 0x07, 0x29,
+ 0xE0, 0x54, 0x1A, 0xF5, 0x34, 0xE0, 0xC4, 0x13,
+/*1440*/0x54, 0x07, 0xF5, 0x35, 0x24, 0xFE, 0x60, 0x24,
+ 0x24, 0xFE, 0x60, 0x3C, 0x24, 0x04, 0x70, 0x63,
+/*1450*/0x75, 0x31, 0x2D, 0xE5, 0x08, 0xFD, 0x74, 0xB6,
+ 0x12, 0x07, 0x92, 0x74, 0xBC, 0x90, 0x07, 0x22,
+/*1460*/0x12, 0x07, 0x95, 0x74, 0x90, 0x12, 0x07, 0xB3,
+ 0x74, 0x92, 0x80, 0x3C, 0x75, 0x31, 0x3A, 0xE5,
+/*1470*/0x08, 0xFD, 0x74, 0xBA, 0x12, 0x07, 0x92, 0x74,
+ 0xC0, 0x90, 0x07, 0x22, 0x12, 0x07, 0xB6, 0x74,
+/*1480*/0xC4, 0x12, 0x07, 0xB3, 0x74, 0xC8, 0x80, 0x20,
+ 0x75, 0x31, 0x35, 0xE5, 0x08, 0xFD, 0x74, 0xB8,
+/*1490*/0x12, 0x07, 0x92, 0x74, 0xBE, 0xFF, 0xED, 0x44,
+ 0x07, 0x90, 0x07, 0x22, 0xCF, 0xF0, 0xA3, 0xEF,
+/*14A0*/0xF0, 0x74, 0xC2, 0x12, 0x07, 0xB3, 0x74, 0xC6,
+ 0xFF, 0xED, 0x44, 0x07, 0xA3, 0xCF, 0xF0, 0xA3,
+/*14B0*/0xEF, 0xF0, 0x22, 0x75, 0x34, 0x01, 0x22, 0x8E,
+ 0x58, 0x8F, 0x59, 0x8C, 0x5A, 0x8D, 0x5B, 0x8A,
+/*14C0*/0x5C, 0x8B, 0x5D, 0x75, 0x5E, 0x01, 0xE4, 0xF5,
+ 0x5F, 0x12, 0x1E, 0xA5, 0x85, 0x59, 0x5E, 0xD3,
+/*14D0*/0xE5, 0x5E, 0x95, 0x5B, 0xE5, 0x5A, 0x12, 0x07,
+ 0x6B, 0x50, 0x57, 0xE5, 0x5D, 0x45, 0x5C, 0x70,
+/*14E0*/0x30, 0x12, 0x07, 0x2A, 0x75, 0x83, 0x92, 0xE5,
+ 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC6, 0xE5,
+/*14F0*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC8, 0xE5,
+ 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0x90, 0xE5,
+/*1500*/0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2, 0xE5,
+ 0x5E, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0x80,
+/*1510*/0x03, 0x12, 0x07, 0x32, 0xE5, 0x5E, 0xF0, 0xAF,
+ 0x5F, 0x7E, 0x00, 0xAD, 0x5D, 0xAC, 0x5C, 0x12,
+/*1520*/0x04, 0x44, 0xAF, 0x5E, 0x7E, 0x00, 0xAD, 0x5D,
+ 0xAC, 0x5C, 0x12, 0x0B, 0xD1, 0x05, 0x5E, 0x02,
+/*1530*/0x14, 0xCF, 0xAB, 0x5D, 0xAA, 0x5C, 0xAD, 0x5B,
+ 0xAC, 0x5A, 0xAF, 0x59, 0xAE, 0x58, 0x02, 0x1B,
+/*1540*/0xFB, 0x8C, 0x5C, 0x8D, 0x5D, 0x8A, 0x5E, 0x8B,
+ 0x5F, 0x75, 0x60, 0x01, 0xE4, 0xF5, 0x61, 0xF5,
+/*1550*/0x62, 0xF5, 0x63, 0x12, 0x1E, 0xA5, 0x8F, 0x60,
+ 0xD3, 0xE5, 0x60, 0x95, 0x5D, 0xE5, 0x5C, 0x12,
+/*1560*/0x07, 0x6B, 0x50, 0x61, 0xE5, 0x5F, 0x45, 0x5E,
+ 0x70, 0x27, 0x12, 0x07, 0x2A, 0x75, 0x83, 0xB6,
+/*1570*/0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xB8,
+ 0xE5, 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0xBA,
+/*1580*/0xE5, 0x60, 0xF0, 0xAF, 0x61, 0x7E, 0x00, 0xE5,
+ 0x62, 0x12, 0x08, 0x7A, 0x12, 0x0A, 0xFF, 0x80,
+/*1590*/0x19, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE5,
+ 0x60, 0x12, 0x07, 0x29, 0x75, 0x83, 0x8E, 0xE4,
+/*15A0*/0x12, 0x07, 0x29, 0x74, 0x01, 0x12, 0x07, 0x29,
+ 0xE4, 0xF0, 0xAF, 0x63, 0x7E, 0x00, 0xAD, 0x5F,
+/*15B0*/0xAC, 0x5E, 0x12, 0x04, 0x44, 0xAF, 0x60, 0x7E,
+ 0x00, 0xAD, 0x5F, 0xAC, 0x5E, 0x12, 0x12, 0x8B,
+/*15C0*/0x05, 0x60, 0x02, 0x15, 0x58, 0x22, 0x90, 0x11,
+ 0x4D, 0xE4, 0x93, 0x90, 0x07, 0x2E, 0xF0, 0x12,
+/*15D0*/0x08, 0x1F, 0x75, 0x83, 0xAE, 0xE0, 0x54, 0x1A,
+ 0xF5, 0x34, 0x70, 0x67, 0xEF, 0x44, 0x07, 0xF5,
+/*15E0*/0x82, 0x75, 0x83, 0xCE, 0xE0, 0xFF, 0x13, 0x13,
+ 0x13, 0x54, 0x07, 0xF5, 0x36, 0x54, 0x0F, 0xD3,
+/*15F0*/0x94, 0x00, 0x40, 0x06, 0x12, 0x14, 0x2D, 0x12,
+ 0x1B, 0xA9, 0xE5, 0x36, 0x54, 0x0F, 0x24, 0xFE,
+/*1600*/0x60, 0x0C, 0x14, 0x60, 0x0C, 0x14, 0x60, 0x19,
+ 0x24, 0x03, 0x70, 0x37, 0x80, 0x10, 0x02, 0x1E,
+/*1610*/0x91, 0x12, 0x1E, 0x91, 0x12, 0x07, 0x2A, 0x75,
+ 0x83, 0xCE, 0xE0, 0x54, 0xEF, 0xF0, 0x02, 0x1D,
+/*1620*/0xAE, 0x12, 0x10, 0x14, 0xE4, 0xF5, 0x55, 0x12,
+ 0x1D, 0x85, 0x05, 0x55, 0xE5, 0x55, 0xC3, 0x94,
+/*1630*/0x05, 0x40, 0xF4, 0x12, 0x07, 0x2A, 0x75, 0x83,
+ 0xCE, 0xE0, 0x54, 0xC7, 0x12, 0x07, 0x29, 0xE0,
+/*1640*/0x44, 0x08, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5,
+ 0x59, 0xAF, 0x08, 0xEF, 0x44, 0x07, 0xF5, 0x82,
+/*1650*/0x75, 0x83, 0xD0, 0xE0, 0xFD, 0xC4, 0x54, 0x0F,
+ 0xF5, 0x5A, 0xEF, 0x44, 0x07, 0xF5, 0x82, 0x75,
+/*1660*/0x83, 0x80, 0x74, 0x01, 0xF0, 0x12, 0x08, 0x21,
+ 0x75, 0x83, 0x82, 0xE5, 0x45, 0xF0, 0xEF, 0x44,
+/*1670*/0x07, 0xF5, 0x82, 0x75, 0x83, 0x8A, 0x74, 0xFF,
+ 0xF0, 0x12, 0x1A, 0x4D, 0x12, 0x07, 0x2A, 0x75,
+/*1680*/0x83, 0xBC, 0xE0, 0x54, 0xEF, 0x12, 0x07, 0x29,
+ 0x75, 0x83, 0xBE, 0xE0, 0x54, 0xEF, 0x12, 0x07,
+/*1690*/0x29, 0x75, 0x83, 0xC0, 0xE0, 0x54, 0xEF, 0x12,
+ 0x07, 0x29, 0x75, 0x83, 0xBC, 0xE0, 0x44, 0x10,
+/*16A0*/0x12, 0x07, 0x29, 0x75, 0x83, 0xBE, 0xE0, 0x44,
+ 0x10, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC0, 0xE0,
+/*16B0*/0x44, 0x10, 0xF0, 0xAF, 0x58, 0xE5, 0x59, 0x12,
+ 0x08, 0x78, 0x02, 0x0A, 0xFF, 0xE4, 0xF5, 0x58,
+/*16C0*/0x7D, 0x01, 0xF5, 0x59, 0xAF, 0x35, 0xFE, 0xFC,
+ 0x12, 0x09, 0x15, 0x12, 0x07, 0x2A, 0x75, 0x83,
+/*16D0*/0xB6, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
+ 0xB8, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
+/*16E0*/0xBA, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
+ 0xBC, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
+/*16F0*/0xBE, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
+ 0xC0, 0x74, 0x10, 0x12, 0x07, 0x29, 0x75, 0x83,
+/*1700*/0x90, 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC2,
+ 0xE4, 0x12, 0x07, 0x29, 0x75, 0x83, 0xC4, 0xE4,
+/*1710*/0x12, 0x07, 0x29, 0x75, 0x83, 0x92, 0xE4, 0x12,
+ 0x07, 0x29, 0x75, 0x83, 0xC6, 0xE4, 0x12, 0x07,
+/*1720*/0x29, 0x75, 0x83, 0xC8, 0xE4, 0xF0, 0xAF, 0x58,
+ 0xFE, 0xE5, 0x59, 0x12, 0x08, 0x7A, 0x02, 0x0A,
+/*1730*/0xFF, 0xE5, 0xE2, 0x30, 0xE4, 0x6C, 0xE5, 0xE7,
+ 0x54, 0xC0, 0x64, 0x40, 0x70, 0x64, 0xE5, 0x09,
+/*1740*/0xC4, 0x54, 0x30, 0xFE, 0xE5, 0x08, 0x25, 0xE0,
+ 0x25, 0xE0, 0x54, 0xC0, 0x4E, 0xFE, 0xEF, 0x54,
+/*1750*/0x3F, 0x4E, 0xFD, 0xE5, 0x2B, 0xAE, 0x2A, 0x78,
+ 0x02, 0xC3, 0x33, 0xCE, 0x33, 0xCE, 0xD8, 0xF9,
+/*1760*/0xF5, 0x82, 0x8E, 0x83, 0xED, 0xF0, 0xE5, 0x2B,
+ 0xAE, 0x2A, 0x78, 0x02, 0xC3, 0x33, 0xCE, 0x33,
+/*1770*/0xCE, 0xD8, 0xF9, 0xFF, 0xF5, 0x82, 0x8E, 0x83,
+ 0xA3, 0xE5, 0xFE, 0xF0, 0x8F, 0x82, 0x8E, 0x83,
+/*1780*/0xA3, 0xA3, 0xE5, 0xFD, 0xF0, 0x8F, 0x82, 0x8E,
+ 0x83, 0xA3, 0xA3, 0xA3, 0xE5, 0xFC, 0xF0, 0xC3,
+/*1790*/0xE5, 0x2B, 0x94, 0xFA, 0xE5, 0x2A, 0x94, 0x00,
+ 0x50, 0x08, 0x05, 0x2B, 0xE5, 0x2B, 0x70, 0x02,
+/*17A0*/0x05, 0x2A, 0x22, 0xE4, 0xFF, 0xE4, 0xF5, 0x58,
+ 0xF5, 0x56, 0xF5, 0x57, 0x74, 0x82, 0xFC, 0x12,
+/*17B0*/0x0E, 0x04, 0x8C, 0x83, 0xE0, 0xF5, 0x10, 0x54,
+ 0x7F, 0xF0, 0xE5, 0x10, 0x44, 0x80, 0x12, 0x0E,
+/*17C0*/0x98, 0xED, 0xF0, 0x7E, 0x0A, 0x12, 0x0E, 0x04,
+ 0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0, 0x26, 0xDE,
+/*17D0*/0xF4, 0x05, 0x57, 0xE5, 0x57, 0x70, 0x02, 0x05,
+ 0x56, 0xE5, 0x14, 0x24, 0x01, 0xFD, 0xE4, 0x33,
+/*17E0*/0xFC, 0xD3, 0xE5, 0x57, 0x9D, 0xE5, 0x56, 0x9C,
+ 0x40, 0xD9, 0xE5, 0x0A, 0x94, 0x20, 0x50, 0x02,
+/*17F0*/0x05, 0x0A, 0x43, 0xE1, 0x08, 0xC2, 0x31, 0x12,
+ 0x0E, 0x04, 0x75, 0x83, 0xA6, 0xE0, 0x55, 0x12,
+/*1800*/0x65, 0x12, 0x70, 0x03, 0xD2, 0x31, 0x22, 0xC2,
+ 0x31, 0x22, 0x90, 0x07, 0x26, 0xE0, 0xFA, 0xA3,
+/*1810*/0xE0, 0xF5, 0x82, 0x8A, 0x83, 0xE0, 0xF5, 0x41,
+ 0xE5, 0x39, 0xC3, 0x95, 0x41, 0x40, 0x26, 0xE5,
+/*1820*/0x39, 0x95, 0x41, 0xC3, 0x9F, 0xEE, 0x12, 0x07,
+ 0x6B, 0x40, 0x04, 0x7C, 0x01, 0x80, 0x02, 0x7C,
+/*1830*/0x00, 0xE5, 0x41, 0x64, 0x3F, 0x60, 0x04, 0x7B,
+ 0x01, 0x80, 0x02, 0x7B, 0x00, 0xEC, 0x5B, 0x60,
+/*1840*/0x29, 0x05, 0x41, 0x80, 0x28, 0xC3, 0xE5, 0x41,
+ 0x95, 0x39, 0xC3, 0x9F, 0xEE, 0x12, 0x07, 0x6B,
+/*1850*/0x40, 0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00,
+ 0xE5, 0x41, 0x60, 0x04, 0x7E, 0x01, 0x80, 0x02,
+/*1860*/0x7E, 0x00, 0xEF, 0x5E, 0x60, 0x04, 0x15, 0x41,
+ 0x80, 0x03, 0x85, 0x39, 0x41, 0x85, 0x3A, 0x40,
+/*1870*/0x22, 0xE5, 0xE2, 0x30, 0xE4, 0x60, 0xE5, 0xE1,
+ 0x30, 0xE2, 0x5B, 0xE5, 0x09, 0x70, 0x04, 0x7F,
+/*1880*/0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5, 0x08, 0x70,
+ 0x04, 0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE,
+/*1890*/0x5F, 0x60, 0x43, 0x53, 0xF9, 0xF8, 0xE5, 0xE2,
+ 0x30, 0xE4, 0x3B, 0xE5, 0xE1, 0x30, 0xE2, 0x2E,
+/*18A0*/0x43, 0xFA, 0x02, 0x53, 0xFA, 0xFB, 0xE4, 0xF5,
+ 0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0xE5,
+/*18B0*/0xE1, 0x30, 0xE2, 0xE7, 0x90, 0x94, 0x70, 0xE0,
+ 0x65, 0x10, 0x60, 0x03, 0x43, 0xFA, 0x04, 0x05,
+/*18C0*/0x10, 0x90, 0x94, 0x70, 0xE5, 0x10, 0xF0, 0x70,
+ 0xE6, 0x12, 0x00, 0x06, 0x80, 0xE1, 0x53, 0xFA,
+/*18D0*/0xFD, 0x53, 0xFA, 0xFB, 0x80, 0xC0, 0x22, 0x8F,
+ 0x54, 0x12, 0x00, 0x06, 0xE5, 0xE1, 0x30, 0xE0,
+/*18E0*/0x04, 0x7F, 0x01, 0x80, 0x02, 0x7F, 0x00, 0xE5,
+ 0x7E, 0xD3, 0x94, 0x05, 0x40, 0x04, 0x7E, 0x01,
+/*18F0*/0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F, 0x60, 0x3D,
+ 0x85, 0x54, 0x11, 0xE5, 0xE2, 0x20, 0xE1, 0x32,
+/*1900*/0x74, 0xCE, 0x12, 0x1A, 0x05, 0x30, 0xE7, 0x04,
+ 0x7D, 0x01, 0x80, 0x02, 0x7D, 0x00, 0x8F, 0x82,
+/*1910*/0x8E, 0x83, 0xE0, 0x30, 0xE6, 0x04, 0x7F, 0x01,
+ 0x80, 0x02, 0x7F, 0x00, 0xEF, 0x5D, 0x70, 0x15,
+/*1920*/0x12, 0x15, 0xC6, 0x74, 0xCE, 0x12, 0x1A, 0x05,
+ 0x30, 0xE6, 0x07, 0xE0, 0x44, 0x80, 0xF0, 0x43,
+/*1930*/0xF9, 0x80, 0x12, 0x18, 0x71, 0x22, 0x12, 0x0E,
+ 0x44, 0xE5, 0x16, 0x25, 0xE0, 0x25, 0xE0, 0x24,
+/*1940*/0xB0, 0xF5, 0x82, 0xE4, 0x34, 0x1A, 0xF5, 0x83,
+ 0xE4, 0x93, 0xF5, 0x0F, 0xE5, 0x16, 0x25, 0xE0,
+/*1950*/0x25, 0xE0, 0x24, 0xB1, 0xF5, 0x82, 0xE4, 0x34,
+ 0x1A, 0xF5, 0x83, 0xE4, 0x93, 0xF5, 0x0E, 0x12,
+/*1960*/0x0E, 0x65, 0xF5, 0x10, 0xE5, 0x0F, 0x54, 0xF0,
+ 0x12, 0x0E, 0x17, 0x75, 0x83, 0x8C, 0xEF, 0xF0,
+/*1970*/0xE5, 0x0F, 0x30, 0xE0, 0x0C, 0x12, 0x0E, 0x04,
+ 0x75, 0x83, 0x86, 0xE0, 0x44, 0x40, 0xF0, 0x80,
+/*1980*/0x0A, 0x12, 0x0E, 0x04, 0x75, 0x83, 0x86, 0xE0,
+ 0x54, 0xBF, 0xF0, 0x12, 0x0E, 0x91, 0x75, 0x83,
+/*1990*/0x82, 0xE5, 0x0E, 0xF0, 0x22, 0x7F, 0x05, 0x12,
+ 0x17, 0x31, 0x12, 0x0E, 0x04, 0x12, 0x0E, 0x33,
+/*19A0*/0x74, 0x02, 0xF0, 0x74, 0x8E, 0xFE, 0x12, 0x0E,
+ 0x04, 0x12, 0x0E, 0x0B, 0xEF, 0xF0, 0x75, 0x15,
+/*19B0*/0x70, 0x12, 0x0F, 0xF7, 0x20, 0x34, 0x05, 0x75,
+ 0x15, 0x10, 0x80, 0x03, 0x75, 0x15, 0x50, 0x12,
+/*19C0*/0x0F, 0xF7, 0x20, 0x34, 0x04, 0x74, 0x10, 0x80,
+ 0x02, 0x74, 0xF0, 0x25, 0x15, 0xF5, 0x15, 0x12,
+/*19D0*/0x0E, 0x21, 0xEF, 0xF0, 0x12, 0x10, 0x91, 0x20,
+ 0x34, 0x17, 0xE5, 0x15, 0x64, 0x30, 0x60, 0x0C,
+/*19E0*/0x74, 0x10, 0x25, 0x15, 0xF5, 0x15, 0xB4, 0x80,
+ 0x03, 0xE4, 0xF5, 0x15, 0x12, 0x0E, 0x21, 0xEF,
+/*19F0*/0xF0, 0x22, 0xF0, 0xE5, 0x0B, 0x25, 0xE0, 0x25,
+ 0xE0, 0x24, 0x82, 0xF5, 0x82, 0xE4, 0x34, 0x07,
+/*1A00*/0xF5, 0x83, 0x22, 0x74, 0x88, 0xFE, 0xE5, 0x08,
+ 0x44, 0x07, 0xFF, 0xF5, 0x82, 0x8E, 0x83, 0xE0,
+/*1A10*/0x22, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0xF5, 0x82,
+ 0x22, 0xF0, 0xE0, 0x54, 0xC0, 0x8F, 0x82, 0x8E,
+/*1A20*/0x83, 0xF0, 0x22, 0xEF, 0x44, 0x07, 0xF5, 0x82,
+ 0x75, 0x83, 0x86, 0xE0, 0x54, 0x10, 0xD3, 0x94,
+/*1A30*/0x00, 0x22, 0xF0, 0x90, 0x07, 0x15, 0xE0, 0x04,
+ 0xF0, 0x22, 0x44, 0x06, 0xF5, 0x82, 0x75, 0x83,
+/*1A40*/0x9E, 0xE0, 0x22, 0xFE, 0xEF, 0x44, 0x07, 0xF5,
+ 0x82, 0x8E, 0x83, 0xE0, 0x22, 0xE4, 0x90, 0x07,
+/*1A50*/0x2A, 0xF0, 0xA3, 0xF0, 0x12, 0x07, 0x2A, 0x75,
+ 0x83, 0x82, 0xE0, 0x54, 0x7F, 0x12, 0x07, 0x29,
+/*1A60*/0xE0, 0x44, 0x80, 0xF0, 0x12, 0x10, 0xFC, 0x12,
+ 0x08, 0x1F, 0x75, 0x83, 0xA0, 0xE0, 0x20, 0xE0,
+/*1A70*/0x1A, 0x90, 0x07, 0x2B, 0xE0, 0x04, 0xF0, 0x70,
+ 0x06, 0x90, 0x07, 0x2A, 0xE0, 0x04, 0xF0, 0x90,
+/*1A80*/0x07, 0x2A, 0xE0, 0xB4, 0x10, 0xE1, 0xA3, 0xE0,
+ 0xB4, 0x00, 0xDC, 0xEE, 0x44, 0xA6, 0xFC, 0xEF,
+/*1A90*/0x44, 0x07, 0xF5, 0x82, 0x8C, 0x83, 0xE0, 0xF5,
+ 0x32, 0xEE, 0x44, 0xA8, 0xFE, 0xEF, 0x44, 0x07,
+/*1AA0*/0xF5, 0x82, 0x8E, 0x83, 0xE0, 0xF5, 0x33, 0x22,
+ 0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x90,
+/*1AB0*/0x00, 0x20, 0x0F, 0x92, 0x00, 0x21, 0x0F, 0x94,
+ 0x00, 0x22, 0x0F, 0x96, 0x00, 0x23, 0x0F, 0x98,
+/*1AC0*/0x00, 0x24, 0x0F, 0x9A, 0x00, 0x25, 0x0F, 0x9C,
+ 0x00, 0x26, 0x0F, 0x9E, 0x00, 0x27, 0x0F, 0xA0,
+/*1AD0*/0x01, 0x20, 0x01, 0xA2, 0x01, 0x21, 0x01, 0xA4,
+ 0x01, 0x22, 0x01, 0xA6, 0x01, 0x23, 0x01, 0xA8,
+/*1AE0*/0x01, 0x24, 0x01, 0xAA, 0x01, 0x25, 0x01, 0xAC,
+ 0x01, 0x26, 0x01, 0xAE, 0x01, 0x27, 0x01, 0xB0,
+/*1AF0*/0x01, 0x28, 0x01, 0xB4, 0x00, 0x28, 0x0F, 0xB6,
+ 0x40, 0x28, 0x0F, 0xB8, 0x61, 0x28, 0x01, 0xCB,
+/*1B00*/0xEF, 0xCB, 0xCA, 0xEE, 0xCA, 0x7F, 0x01, 0xE4,
+ 0xFD, 0xEB, 0x4A, 0x70, 0x24, 0xE5, 0x08, 0xF5,
+/*1B10*/0x82, 0x74, 0xB6, 0x12, 0x08, 0x29, 0xE5, 0x08,
+ 0xF5, 0x82, 0x74, 0xB8, 0x12, 0x08, 0x29, 0xE5,
+/*1B20*/0x08, 0xF5, 0x82, 0x74, 0xBA, 0x12, 0x08, 0x29,
+ 0x7E, 0x00, 0x7C, 0x00, 0x12, 0x0A, 0xFF, 0x80,
+/*1B30*/0x12, 0x90, 0x07, 0x26, 0x12, 0x07, 0x35, 0xE5,
+ 0x41, 0xF0, 0x90, 0x07, 0x24, 0x12, 0x07, 0x35,
+/*1B40*/0xE5, 0x40, 0xF0, 0x12, 0x07, 0x2A, 0x75, 0x83,
+ 0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74, 0x01, 0x12,
+/*1B50*/0x07, 0x29, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x26,
+ 0xF5, 0x27, 0x53, 0xE1, 0xFE, 0xF5, 0x2A, 0x75,
+/*1B60*/0x2B, 0x01, 0xF5, 0x08, 0x7F, 0x01, 0x12, 0x17,
+ 0x31, 0x30, 0x30, 0x1C, 0x90, 0x1A, 0xA9, 0xE4,
+/*1B70*/0x93, 0xF5, 0x10, 0x90, 0x1F, 0xF9, 0xE4, 0x93,
+ 0xF5, 0x10, 0x90, 0x00, 0x41, 0xE4, 0x93, 0xF5,
+/*1B80*/0x10, 0x90, 0x1E, 0xCA, 0xE4, 0x93, 0xF5, 0x10,
+ 0x7F, 0x02, 0x12, 0x17, 0x31, 0x12, 0x0F, 0x54,
+/*1B90*/0x7F, 0x03, 0x12, 0x17, 0x31, 0x12, 0x00, 0x06,
+ 0xE5, 0xE2, 0x30, 0xE7, 0x09, 0x12, 0x10, 0x00,
+/*1BA0*/0x30, 0x30, 0x03, 0x12, 0x11, 0x00, 0x02, 0x00,
+ 0x47, 0x12, 0x08, 0x1F, 0x75, 0x83, 0xD0, 0xE0,
+/*1BB0*/0xC4, 0x54, 0x0F, 0xFD, 0x75, 0x43, 0x01, 0x75,
+ 0x44, 0xFF, 0x12, 0x08, 0xAA, 0x74, 0x04, 0xF0,
+/*1BC0*/0x75, 0x3B, 0x01, 0xED, 0x14, 0x60, 0x0C, 0x14,
+ 0x60, 0x0B, 0x14, 0x60, 0x0F, 0x24, 0x03, 0x70,
+/*1BD0*/0x0B, 0x80, 0x09, 0x80, 0x00, 0x12, 0x08, 0xA7,
+ 0x04, 0xF0, 0x80, 0x06, 0x12, 0x08, 0xA7, 0x74,
+/*1BE0*/0x04, 0xF0, 0xEE, 0x44, 0x82, 0xFE, 0xEF, 0x44,
+ 0x07, 0xF5, 0x82, 0x8E, 0x83, 0xE5, 0x45, 0x12,
+/*1BF0*/0x08, 0xBE, 0x75, 0x83, 0x82, 0xE5, 0x31, 0xF0,
+ 0x02, 0x11, 0x4C, 0x8E, 0x60, 0x8F, 0x61, 0x12,
+/*1C00*/0x1E, 0xA5, 0xE4, 0xFF, 0xCE, 0xED, 0xCE, 0xEE,
+ 0xD3, 0x95, 0x61, 0xE5, 0x60, 0x12, 0x07, 0x6B,
+/*1C10*/0x40, 0x39, 0x74, 0x20, 0x2E, 0xF5, 0x82, 0xE4,
+ 0x34, 0x03, 0xF5, 0x83, 0xE0, 0x70, 0x03, 0xFF,
+/*1C20*/0x80, 0x26, 0x12, 0x08, 0xE2, 0xFD, 0xC3, 0x9F,
+ 0x40, 0x1E, 0xCF, 0xED, 0xCF, 0xEB, 0x4A, 0x70,
+/*1C30*/0x0B, 0x8D, 0x42, 0x12, 0x08, 0xEE, 0xF5, 0x41,
+ 0x8E, 0x40, 0x80, 0x0C, 0x12, 0x08, 0xE2, 0xF5,
+/*1C40*/0x38, 0x12, 0x08, 0xEE, 0xF5, 0x39, 0x8E, 0x3A,
+ 0x1E, 0x80, 0xBC, 0x22, 0x75, 0x58, 0x01, 0xE5,
+/*1C50*/0x35, 0x70, 0x0C, 0x12, 0x07, 0xCC, 0xE0, 0xF5,
+ 0x4A, 0x12, 0x07, 0xD8, 0xE0, 0xF5, 0x4C, 0xE5,
+/*1C60*/0x35, 0xB4, 0x04, 0x0C, 0x12, 0x07, 0xE4, 0xE0,
+ 0xF5, 0x4A, 0x12, 0x07, 0xF0, 0xE0, 0xF5, 0x4C,
+/*1C70*/0xE5, 0x35, 0xB4, 0x01, 0x04, 0x7F, 0x01, 0x80,
+ 0x02, 0x7F, 0x00, 0xE5, 0x35, 0xB4, 0x02, 0x04,
+/*1C80*/0x7E, 0x01, 0x80, 0x02, 0x7E, 0x00, 0xEE, 0x4F,
+ 0x60, 0x0C, 0x12, 0x07, 0xFC, 0xE0, 0xF5, 0x4A,
+/*1C90*/0x12, 0x08, 0x08, 0xE0, 0xF5, 0x4C, 0x85, 0x41,
+ 0x49, 0x85, 0x40, 0x4B, 0x22, 0x75, 0x5B, 0x01,
+/*1CA0*/0x90, 0x07, 0x24, 0x12, 0x07, 0x35, 0xE0, 0x54,
+ 0x1F, 0xFF, 0xD3, 0x94, 0x02, 0x50, 0x04, 0x8F,
+/*1CB0*/0x58, 0x80, 0x05, 0xEF, 0x24, 0xFE, 0xF5, 0x58,
+ 0xEF, 0xC3, 0x94, 0x18, 0x40, 0x05, 0x75, 0x59,
+/*1CC0*/0x18, 0x80, 0x04, 0xEF, 0x04, 0xF5, 0x59, 0x85,
+ 0x43, 0x5A, 0xAF, 0x58, 0x7E, 0x00, 0xAD, 0x59,
+/*1CD0*/0x7C, 0x00, 0xAB, 0x5B, 0x7A, 0x00, 0x12, 0x15,
+ 0x41, 0xAF, 0x5A, 0x7E, 0x00, 0x12, 0x18, 0x0A,
+/*1CE0*/0xAF, 0x5B, 0x7E, 0x00, 0x02, 0x1A, 0xFF, 0xE5,
+ 0xE2, 0x30, 0xE7, 0x0E, 0x12, 0x10, 0x03, 0xC2,
+/*1CF0*/0x30, 0x30, 0x30, 0x03, 0x12, 0x10, 0xFF, 0x20,
+ 0x33, 0x28, 0xE5, 0xE7, 0x30, 0xE7, 0x05, 0x12,
+/*1D00*/0x0E, 0xA2, 0x80, 0x0D, 0xE5, 0xFE, 0xC3, 0x94,
+ 0x20, 0x50, 0x06, 0x12, 0x0E, 0xA2, 0x43, 0xF9,
+/*1D10*/0x08, 0xE5, 0xF2, 0x30, 0xE7, 0x03, 0x53, 0xF9,
+ 0x7F, 0xE5, 0xF1, 0x54, 0x70, 0xD3, 0x94, 0x00,
+/*1D20*/0x50, 0xD8, 0x22, 0x12, 0x0E, 0x04, 0x75, 0x83,
+ 0x80, 0xE4, 0xF0, 0xE5, 0x08, 0x44, 0x07, 0x12,
+/*1D30*/0x0D, 0xFD, 0x75, 0x83, 0x84, 0x12, 0x0E, 0x02,
+ 0x75, 0x83, 0x86, 0x12, 0x0E, 0x02, 0x75, 0x83,
+/*1D40*/0x8C, 0xE0, 0x54, 0xF3, 0x12, 0x0E, 0x03, 0x75,
+ 0x83, 0x8E, 0x12, 0x0E, 0x02, 0x75, 0x83, 0x94,
+/*1D50*/0xE0, 0x54, 0xFB, 0xF0, 0x22, 0x12, 0x07, 0x2A,
+ 0x75, 0x83, 0x8E, 0xE4, 0x12, 0x07, 0x29, 0x74,
+/*1D60*/0x01, 0x12, 0x07, 0x29, 0xE4, 0x12, 0x08, 0xBE,
+ 0x75, 0x83, 0x8C, 0xE0, 0x44, 0x20, 0x12, 0x08,
+/*1D70*/0xBE, 0xE0, 0x54, 0xDF, 0xF0, 0x74, 0x84, 0x85,
+ 0x08, 0x82, 0xF5, 0x83, 0xE0, 0x54, 0x7F, 0xF0,
+/*1D80*/0xE0, 0x44, 0x80, 0xF0, 0x22, 0x75, 0x56, 0x01,
+ 0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE, 0xFC,
+/*1D90*/0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12, 0x1E,
+ 0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E, 0x00,
+/*1DA0*/0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44, 0xAF,
+ 0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0x75, 0x56,
+/*1DB0*/0x01, 0xE4, 0xFD, 0xF5, 0x57, 0xAF, 0x35, 0xFE,
+ 0xFC, 0x12, 0x09, 0x15, 0x12, 0x1C, 0x9D, 0x12,
+/*1DC0*/0x1E, 0x7A, 0x12, 0x1C, 0x4C, 0xAF, 0x57, 0x7E,
+ 0x00, 0xAD, 0x56, 0x7C, 0x00, 0x12, 0x04, 0x44,
+/*1DD0*/0xAF, 0x56, 0x7E, 0x00, 0x02, 0x11, 0xEE, 0xE4,
+ 0xF5, 0x16, 0x12, 0x0E, 0x44, 0xFE, 0xE5, 0x08,
+/*1DE0*/0x44, 0x05, 0xFF, 0x12, 0x0E, 0x65, 0x8F, 0x82,
+ 0x8E, 0x83, 0xF0, 0x05, 0x16, 0xE5, 0x16, 0xC3,
+/*1DF0*/0x94, 0x14, 0x40, 0xE6, 0xE5, 0x08, 0x12, 0x0E,
+ 0x2B, 0xE4, 0xF0, 0x22, 0xE4, 0xF5, 0x58, 0xF5,
+/*1E00*/0x59, 0xF5, 0x5A, 0xFF, 0xFE, 0xAD, 0x58, 0xFC,
+ 0x12, 0x09, 0x15, 0x7F, 0x04, 0x7E, 0x00, 0xAD,
+/*1E10*/0x58, 0x7C, 0x00, 0x12, 0x09, 0x15, 0x7F, 0x02,
+ 0x7E, 0x00, 0xAD, 0x58, 0x7C, 0x00, 0x02, 0x09,
+/*1E20*/0x15, 0xE5, 0x3C, 0x25, 0x3E, 0xFC, 0xE5, 0x42,
+ 0x24, 0x00, 0xFB, 0xE4, 0x33, 0xFA, 0xEC, 0xC3,
+/*1E30*/0x9B, 0xEA, 0x12, 0x07, 0x6B, 0x40, 0x0B, 0x8C,
+ 0x42, 0xE5, 0x3D, 0x25, 0x3F, 0xF5, 0x41, 0x8F,
+/*1E40*/0x40, 0x22, 0x12, 0x09, 0x0B, 0x22, 0x74, 0x84,
+ 0xF5, 0x18, 0x85, 0x08, 0x19, 0x85, 0x19, 0x82,
+/*1E50*/0x85, 0x18, 0x83, 0xE0, 0x54, 0x7F, 0xF0, 0xE0,
+ 0x44, 0x80, 0xF0, 0xE0, 0x44, 0x80, 0xF0, 0x22,
+/*1E60*/0xEF, 0x4E, 0x70, 0x0B, 0x12, 0x07, 0x2A, 0x75,
+ 0x83, 0xD2, 0xE0, 0x54, 0xDF, 0xF0, 0x22, 0x12,
+/*1E70*/0x07, 0x2A, 0x75, 0x83, 0xD2, 0xE0, 0x44, 0x20,
+ 0xF0, 0x22, 0x75, 0x58, 0x01, 0x90, 0x07, 0x26,
+/*1E80*/0x12, 0x07, 0x35, 0xE0, 0x54, 0x3F, 0xF5, 0x41,
+ 0x12, 0x07, 0x32, 0xE0, 0x54, 0x3F, 0xF5, 0x40,
+/*1E90*/0x22, 0x75, 0x56, 0x02, 0xE4, 0xF5, 0x57, 0x12,
+ 0x1D, 0xFC, 0xAF, 0x57, 0x7E, 0x00, 0xAD, 0x56,
+/*1EA0*/0x7C, 0x00, 0x02, 0x04, 0x44, 0xE4, 0xF5, 0x42,
+ 0xF5, 0x41, 0xF5, 0x40, 0xF5, 0x38, 0xF5, 0x39,
+/*1EB0*/0xF5, 0x3A, 0x22, 0xEF, 0x54, 0x07, 0xFF, 0xE5,
+ 0xF9, 0x54, 0xF8, 0x4F, 0xF5, 0xF9, 0x22, 0x7F,
+/*1EC0*/0x01, 0xE4, 0xFE, 0x0F, 0x0E, 0xBE, 0xFF, 0xFB,
+ 0x22, 0x01, 0x20, 0x00, 0x01, 0x04, 0x20, 0x00,
+/*1ED0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1EE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1EF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1F00*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1F10*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1F20*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1F30*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1F40*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1F50*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1F60*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1F70*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1F80*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1F90*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1FA0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1FB0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1FC0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1FD0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1FE0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/*1FF0*/0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x20, 0x11, 0x00, 0x04, 0x20, 0x00, 0x81
+};
+
+int ipath_sd7220_ib_load(struct ipath_devdata *dd)
+{
+ return ipath_sd7220_prog_ld(dd, IB_7220_SERDES, ipath_sd7220_ib_img,
+ sizeof(ipath_sd7220_ib_img), 0);
+}
+
+int ipath_sd7220_ib_vfy(struct ipath_devdata *dd)
+{
+ return ipath_sd7220_prog_vfy(dd, IB_7220_SERDES, ipath_sd7220_ib_img,
+ sizeof(ipath_sd7220_ib_img), 0);
+}
diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c
new file mode 100644
index 0000000..1974df7
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_sdma.c
@@ -0,0 +1,790 @@
+/*
+ * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/spinlock.h>
+
+#include "ipath_kernel.h"
+#include "ipath_verbs.h"
+#include "ipath_common.h"
+
+#define SDMA_DESCQ_SZ PAGE_SIZE /* 256 entries per 4KB page */
+
+static void vl15_watchdog_enq(struct ipath_devdata *dd)
+{
+ /* ipath_sdma_lock must already be held */
+ if (atomic_inc_return(&dd->ipath_sdma_vl15_count) == 1) {
+ unsigned long interval = (HZ + 19) / 20;
+ dd->ipath_sdma_vl15_timer.expires = jiffies + interval;
+ add_timer(&dd->ipath_sdma_vl15_timer);
+ }
+}
+
+static void vl15_watchdog_deq(struct ipath_devdata *dd)
+{
+ /* ipath_sdma_lock must already be held */
+ if (atomic_dec_return(&dd->ipath_sdma_vl15_count) != 0) {
+ unsigned long interval = (HZ + 19) / 20;
+ mod_timer(&dd->ipath_sdma_vl15_timer, jiffies + interval);
+ } else {
+ del_timer(&dd->ipath_sdma_vl15_timer);
+ }
+}
+
+static void vl15_watchdog_timeout(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+
+ if (atomic_read(&dd->ipath_sdma_vl15_count) != 0) {
+ ipath_dbg("vl15 watchdog timeout - clearing\n");
+ ipath_cancel_sends(dd, 1);
+ ipath_hol_down(dd);
+ } else {
+ ipath_dbg("vl15 watchdog timeout - "
+ "condition already cleared\n");
+ }
+}
+
+static void unmap_desc(struct ipath_devdata *dd, unsigned head)
+{
+ __le64 *descqp = &dd->ipath_sdma_descq[head].qw[0];
+ u64 desc[2];
+ dma_addr_t addr;
+ size_t len;
+
+ desc[0] = le64_to_cpu(descqp[0]);
+ desc[1] = le64_to_cpu(descqp[1]);
+
+ addr = (desc[1] << 32) | (desc[0] >> 32);
+ len = (desc[0] >> 14) & (0x7ffULL << 2);
+ dma_unmap_single(&dd->pcidev->dev, addr, len, DMA_TO_DEVICE);
+}
+
+/*
+ * ipath_sdma_lock should be locked before calling this.
+ */
+int ipath_sdma_make_progress(struct ipath_devdata *dd)
+{
+ struct list_head *lp = NULL;
+ struct ipath_sdma_txreq *txp = NULL;
+ u16 dmahead;
+ u16 start_idx = 0;
+ int progress = 0;
+
+ if (!list_empty(&dd->ipath_sdma_activelist)) {
+ lp = dd->ipath_sdma_activelist.next;
+ txp = list_entry(lp, struct ipath_sdma_txreq, list);
+ start_idx = txp->start_idx;
+ }
+
+ /*
+ * Read the SDMA head register in order to know that the
+ * interrupt clear has been written to the chip.
+ * Otherwise, we may not get an interrupt for the last
+ * descriptor in the queue.
+ */
+ dmahead = (u16)ipath_read_kreg32(dd, dd->ipath_kregs->kr_senddmahead);
+ /* sanity check return value for error handling (chip reset, etc.) */
+ if (dmahead >= dd->ipath_sdma_descq_cnt)
+ goto done;
+
+ while (dd->ipath_sdma_descq_head != dmahead) {
+ if (txp && txp->flags & IPATH_SDMA_TXREQ_F_FREEDESC &&
+ dd->ipath_sdma_descq_head == start_idx) {
+ unmap_desc(dd, dd->ipath_sdma_descq_head);
+ start_idx++;
+ if (start_idx == dd->ipath_sdma_descq_cnt)
+ start_idx = 0;
+ }
+
+ /* increment free count and head */
+ dd->ipath_sdma_descq_removed++;
+ if (++dd->ipath_sdma_descq_head == dd->ipath_sdma_descq_cnt)
+ dd->ipath_sdma_descq_head = 0;
+
+ if (txp && txp->next_descq_idx == dd->ipath_sdma_descq_head) {
+ /* move to notify list */
+ if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
+ vl15_watchdog_deq(dd);
+ list_move_tail(lp, &dd->ipath_sdma_notifylist);
+ if (!list_empty(&dd->ipath_sdma_activelist)) {
+ lp = dd->ipath_sdma_activelist.next;
+ txp = list_entry(lp, struct ipath_sdma_txreq,
+ list);
+ start_idx = txp->start_idx;
+ } else {
+ lp = NULL;
+ txp = NULL;
+ }
+ }
+ progress = 1;
+ }
+
+ if (progress)
+ tasklet_hi_schedule(&dd->ipath_sdma_notify_task);
+
+done:
+ return progress;
+}
+
+static void ipath_sdma_notify(struct ipath_devdata *dd, struct list_head *list)
+{
+ struct ipath_sdma_txreq *txp, *txp_next;
+
+ list_for_each_entry_safe(txp, txp_next, list, list) {
+ list_del_init(&txp->list);
+
+ if (txp->callback)
+ (*txp->callback)(txp->callback_cookie,
+ txp->callback_status);
+ }
+}
+
+static void sdma_notify_taskbody(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+ struct list_head list;
+
+ INIT_LIST_HEAD(&list);
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+ list_splice_init(&dd->ipath_sdma_notifylist, &list);
+
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ ipath_sdma_notify(dd, &list);
+
+ /*
+ * The IB verbs layer needs to see the callback before getting
+ * the call to ipath_ib_piobufavail() because the callback
+ * handles releasing resources the next send will need.
+ * Otherwise, we could do these calls in
+ * ipath_sdma_make_progress().
+ */
+ ipath_ib_piobufavail(dd->verbs_dev);
+}
+
+static void sdma_notify_task(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
+
+ if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ sdma_notify_taskbody(dd);
+}
+
+static void dump_sdma_state(struct ipath_devdata *dd)
+{
+ unsigned long reg;
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmastatus);
+ ipath_cdbg(VERBOSE, "kr_senddmastatus: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_sendctrl);
+ ipath_cdbg(VERBOSE, "kr_sendctrl: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask0);
+ ipath_cdbg(VERBOSE, "kr_senddmabufmask0: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask1);
+ ipath_cdbg(VERBOSE, "kr_senddmabufmask1: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmabufmask2);
+ ipath_cdbg(VERBOSE, "kr_senddmabufmask2: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmatail);
+ ipath_cdbg(VERBOSE, "kr_senddmatail: 0x%016lx\n", reg);
+
+ reg = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmahead);
+ ipath_cdbg(VERBOSE, "kr_senddmahead: 0x%016lx\n", reg);
+}
+
+static void sdma_abort_task(unsigned long opaque)
+{
+ struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
+ u64 status;
+ unsigned long flags;
+
+ if (test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ return;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+ status = dd->ipath_sdma_status & IPATH_SDMA_ABORT_MASK;
+
+ /* nothing to do */
+ if (status == IPATH_SDMA_ABORT_NONE)
+ goto unlock;
+
+ /* ipath_sdma_abort() is done, waiting for interrupt */
+ if (status == IPATH_SDMA_ABORT_DISARMED) {
+ if (jiffies < dd->ipath_sdma_abort_intr_timeout)
+ goto resched_noprint;
+ /* give up, intr got lost somewhere */
+ ipath_dbg("give up waiting for SDMADISABLED intr\n");
+ __set_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
+ status = IPATH_SDMA_ABORT_ABORTED;
+ }
+
+ /* everything is stopped, time to clean up and restart */
+ if (status == IPATH_SDMA_ABORT_ABORTED) {
+ struct ipath_sdma_txreq *txp, *txpnext;
+ u64 hwstatus;
+ int notify = 0;
+
+ hwstatus = ipath_read_kreg64(dd,
+ dd->ipath_kregs->kr_senddmastatus);
+
+ if (/* ScoreBoardDrainInProg */
+ test_bit(63, &hwstatus) ||
+ /* AbortInProg */
+ test_bit(62, &hwstatus) ||
+ /* InternalSDmaEnable */
+ test_bit(61, &hwstatus) ||
+ /* ScbEmpty */
+ !test_bit(30, &hwstatus)) {
+ if (dd->ipath_sdma_reset_wait > 0) {
+ /* not done shutting down sdma */
+ --dd->ipath_sdma_reset_wait;
+ goto resched;
+ }
+ ipath_cdbg(VERBOSE, "gave up waiting for quiescent "
+ "status after SDMA reset, continuing\n");
+ dump_sdma_state(dd);
+ }
+
+ /* dequeue all "sent" requests */
+ list_for_each_entry_safe(txp, txpnext,
+ &dd->ipath_sdma_activelist, list) {
+ txp->callback_status = IPATH_SDMA_TXREQ_S_ABORTED;
+ if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
+ vl15_watchdog_deq(dd);
+ list_move_tail(&txp->list, &dd->ipath_sdma_notifylist);
+ notify = 1;
+ }
+ if (notify)
+ tasklet_hi_schedule(&dd->ipath_sdma_notify_task);
+
+ /* reset our notion of head and tail */
+ dd->ipath_sdma_descq_tail = 0;
+ dd->ipath_sdma_descq_head = 0;
+ dd->ipath_sdma_head_dma[0] = 0;
+ dd->ipath_sdma_generation = 0;
+ dd->ipath_sdma_descq_removed = dd->ipath_sdma_descq_added;
+
+ /* Reset SendDmaLenGen */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen,
+ (u64) dd->ipath_sdma_descq_cnt | (1ULL << 18));
+
+ /* done with sdma state for a bit */
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ /*
+ * Don't restart sdma here. Wait until link is up to ACTIVE.
+ * VL15 MADs used to bring the link up use PIO, and multiple
+ * link transitions otherwise cause the sdma engine to be
+ * stopped and started multiple times.
+ * The disable is done here, including the shadow, so the
+ * state is kept consistent.
+ * See ipath_restart_sdma() for the actual starting of sdma.
+ */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ /* make sure I see next message */
+ dd->ipath_sdma_abort_jiffies = 0;
+
+ goto done;
+ }
+
+resched:
+ /*
+ * for now, keep spinning
+ * JAG - this is bad to just have default be a loop without
+ * state change
+ */
+ if (jiffies > dd->ipath_sdma_abort_jiffies) {
+ ipath_dbg("looping with status 0x%016llx\n",
+ dd->ipath_sdma_status);
+ dd->ipath_sdma_abort_jiffies = jiffies + 5 * HZ;
+ }
+resched_noprint:
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (!test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ tasklet_hi_schedule(&dd->ipath_sdma_abort_task);
+ return;
+
+unlock:
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+done:
+ return;
+}
+
+/*
+ * This is called from interrupt context.
+ */
+void ipath_sdma_intr(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+ (void) ipath_sdma_make_progress(dd);
+
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+}
+
+static int alloc_sdma(struct ipath_devdata *dd)
+{
+ int ret = 0;
+
+ /* Allocate memory for SendDMA descriptor FIFO */
+ dd->ipath_sdma_descq = dma_alloc_coherent(&dd->pcidev->dev,
+ SDMA_DESCQ_SZ, &dd->ipath_sdma_descq_phys, GFP_KERNEL);
+
+ if (!dd->ipath_sdma_descq) {
+ ipath_dev_err(dd, "failed to allocate SendDMA descriptor "
+ "FIFO memory\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ dd->ipath_sdma_descq_cnt =
+ SDMA_DESCQ_SZ / sizeof(struct ipath_sdma_desc);
+
+ /* Allocate memory for DMA of head register to memory */
+ dd->ipath_sdma_head_dma = dma_alloc_coherent(&dd->pcidev->dev,
+ PAGE_SIZE, &dd->ipath_sdma_head_phys, GFP_KERNEL);
+ if (!dd->ipath_sdma_head_dma) {
+ ipath_dev_err(dd, "failed to allocate SendDMA head memory\n");
+ ret = -ENOMEM;
+ goto cleanup_descq;
+ }
+ dd->ipath_sdma_head_dma[0] = 0;
+
+ init_timer(&dd->ipath_sdma_vl15_timer);
+ dd->ipath_sdma_vl15_timer.function = vl15_watchdog_timeout;
+ dd->ipath_sdma_vl15_timer.data = (unsigned long)dd;
+ atomic_set(&dd->ipath_sdma_vl15_count, 0);
+
+ goto done;
+
+cleanup_descq:
+ dma_free_coherent(&dd->pcidev->dev, SDMA_DESCQ_SZ,
+ (void *)dd->ipath_sdma_descq, dd->ipath_sdma_descq_phys);
+ dd->ipath_sdma_descq = NULL;
+ dd->ipath_sdma_descq_phys = 0;
+done:
+ return ret;
+}
+
+int setup_sdma(struct ipath_devdata *dd)
+{
+ int ret = 0;
+ unsigned i, n;
+ u64 tmp64;
+ u64 senddmabufmask[3] = { 0 };
+ unsigned long flags;
+
+ ret = alloc_sdma(dd);
+ if (ret)
+ goto done;
+
+ if (!dd->ipath_sdma_descq) {
+ ipath_dev_err(dd, "SendDMA memory not allocated\n");
+ goto done;
+ }
+
+ dd->ipath_sdma_status = 0;
+ dd->ipath_sdma_abort_jiffies = 0;
+ dd->ipath_sdma_generation = 0;
+ dd->ipath_sdma_descq_tail = 0;
+ dd->ipath_sdma_descq_head = 0;
+ dd->ipath_sdma_descq_removed = 0;
+ dd->ipath_sdma_descq_added = 0;
+
+ /* Set SendDmaBase */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabase,
+ dd->ipath_sdma_descq_phys);
+ /* Set SendDmaLenGen */
+ tmp64 = dd->ipath_sdma_descq_cnt;
+ tmp64 |= 1<<18; /* enable generation checking */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen, tmp64);
+ /* Set SendDmaTail */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail,
+ dd->ipath_sdma_descq_tail);
+ /* Set SendDmaHeadAddr */
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr,
+ dd->ipath_sdma_head_phys);
+
+ /* Reserve all the former "kernel" piobufs */
+ n = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k - dd->ipath_pioreserved;
+ for (i = dd->ipath_lastport_piobuf; i < n; ++i) {
+ unsigned word = i / 64;
+ unsigned bit = i & 63;
+ BUG_ON(word >= 3);
+ senddmabufmask[word] |= 1ULL << bit;
+ }
+ ipath_chg_pioavailkernel(dd, dd->ipath_lastport_piobuf,
+ n - dd->ipath_lastport_piobuf, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0,
+ senddmabufmask[0]);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1,
+ senddmabufmask[1]);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask2,
+ senddmabufmask[2]);
+
+ INIT_LIST_HEAD(&dd->ipath_sdma_activelist);
+ INIT_LIST_HEAD(&dd->ipath_sdma_notifylist);
+
+ tasklet_init(&dd->ipath_sdma_notify_task, sdma_notify_task,
+ (unsigned long) dd);
+ tasklet_init(&dd->ipath_sdma_abort_task, sdma_abort_task,
+ (unsigned long) dd);
+
+ /*
+ * No use to turn on SDMA here, as link is probably not ACTIVE
+ * Just mark it RUNNING and enable the interrupt, and let the
+ * ipath_restart_sdma() on link transition to ACTIVE actually
+ * enable it.
+ */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl |= INFINIPATH_S_SDMAINTENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ __set_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+done:
+ return ret;
+}
+
+void teardown_sdma(struct ipath_devdata *dd)
+{
+ struct ipath_sdma_txreq *txp, *txpnext;
+ unsigned long flags;
+ dma_addr_t sdma_head_phys = 0;
+ dma_addr_t sdma_descq_phys = 0;
+ void *sdma_descq = NULL;
+ void *sdma_head_dma = NULL;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ __clear_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status);
+ __set_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
+ __set_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ tasklet_kill(&dd->ipath_sdma_abort_task);
+ tasklet_kill(&dd->ipath_sdma_notify_task);
+
+ /* turn off sdma */
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
+ dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ /* dequeue all "sent" requests */
+ list_for_each_entry_safe(txp, txpnext, &dd->ipath_sdma_activelist,
+ list) {
+ txp->callback_status = IPATH_SDMA_TXREQ_S_SHUTDOWN;
+ if (txp->flags & IPATH_SDMA_TXREQ_F_VL15)
+ vl15_watchdog_deq(dd);
+ list_move_tail(&txp->list, &dd->ipath_sdma_notifylist);
+ }
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ sdma_notify_taskbody(dd);
+
+ del_timer_sync(&dd->ipath_sdma_vl15_timer);
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+ dd->ipath_sdma_abort_jiffies = 0;
+
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabase, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmalengen, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmaheadaddr, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask0, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask1, 0);
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmabufmask2, 0);
+
+ if (dd->ipath_sdma_head_dma) {
+ sdma_head_dma = (void *) dd->ipath_sdma_head_dma;
+ sdma_head_phys = dd->ipath_sdma_head_phys;
+ dd->ipath_sdma_head_dma = NULL;
+ dd->ipath_sdma_head_phys = 0;
+ }
+
+ if (dd->ipath_sdma_descq) {
+ sdma_descq = dd->ipath_sdma_descq;
+ sdma_descq_phys = dd->ipath_sdma_descq_phys;
+ dd->ipath_sdma_descq = NULL;
+ dd->ipath_sdma_descq_phys = 0;
+ }
+
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ if (sdma_head_dma)
+ dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+ sdma_head_dma, sdma_head_phys);
+
+ if (sdma_descq)
+ dma_free_coherent(&dd->pcidev->dev, SDMA_DESCQ_SZ,
+ sdma_descq, sdma_descq_phys);
+}
+
+/*
+ * [Re]start SDMA, if we use it, and it's not already OK.
+ * This is called on transition to link ACTIVE, either the first or
+ * subsequent times.
+ */
+void ipath_restart_sdma(struct ipath_devdata *dd)
+{
+ unsigned long flags;
+ int needed = 1;
+
+ if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA))
+ goto bail;
+
+ /*
+ * First, make sure we should, which is to say,
+ * check that we are "RUNNING" (not in teardown)
+ * and not "SHUTDOWN"
+ */
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ if (!test_bit(IPATH_SDMA_RUNNING, &dd->ipath_sdma_status)
+ || test_bit(IPATH_SDMA_SHUTDOWN, &dd->ipath_sdma_status))
+ needed = 0;
+ else {
+ __clear_bit(IPATH_SDMA_DISABLED, &dd->ipath_sdma_status);
+ __clear_bit(IPATH_SDMA_DISARMED, &dd->ipath_sdma_status);
+ __clear_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status);
+ }
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+ if (!needed) {
+ ipath_dbg("invalid attempt to restart SDMA, status 0x%016llx\n",
+ dd->ipath_sdma_status);
+ goto bail;
+ }
+ spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
+ /*
+ * First clear, just to be safe. Enable is only done
+ * in chip on 0->1 transition
+ */
+ dd->ipath_sendctrl &= ~INFINIPATH_S_SDMAENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ dd->ipath_sendctrl |= INFINIPATH_S_SDMAENABLE;
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, dd->ipath_sendctrl);
+ ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
+ spin_unlock_irqrestore(&dd->ipath_sendctrl_lock, flags);
+
+bail:
+ return;
+}
+
+static inline void make_sdma_desc(struct ipath_devdata *dd,
+ u64 *sdmadesc, u64 addr, u64 dwlen, u64 dwoffset)
+{
+ WARN_ON(addr & 3);
+ /* SDmaPhyAddr[47:32] */
+ sdmadesc[1] = addr >> 32;
+ /* SDmaPhyAddr[31:0] */
+ sdmadesc[0] = (addr & 0xfffffffcULL) << 32;
+ /* SDmaGeneration[1:0] */
+ sdmadesc[0] |= (dd->ipath_sdma_generation & 3ULL) << 30;
+ /* SDmaDwordCount[10:0] */
+ sdmadesc[0] |= (dwlen & 0x7ffULL) << 16;
+ /* SDmaBufOffset[12:2] */
+ sdmadesc[0] |= dwoffset & 0x7ffULL;
+}
+
+/*
+ * This function queues one IB packet onto the send DMA queue per call.
+ * The caller is responsible for checking:
+ * 1) The number of send DMA descriptor entries is less than the size of
+ * the descriptor queue.
+ * 2) The IB SGE addresses and lengths are 32-bit aligned
+ * (except possibly the last SGE's length)
+ * 3) The SGE addresses are suitable for passing to dma_map_single().
+ */
+int ipath_sdma_verbs_send(struct ipath_devdata *dd,
+ struct ipath_sge_state *ss, u32 dwords,
+ struct ipath_verbs_txreq *tx)
+{
+
+ unsigned long flags;
+ struct ipath_sge *sge;
+ int ret = 0;
+ u16 tail;
+ __le64 *descqp;
+ u64 sdmadesc[2];
+ u32 dwoffset;
+ dma_addr_t addr;
+
+ if ((tx->map_len + (dwords<<2)) > dd->ipath_ibmaxlen) {
+ ipath_dbg("packet size %X > ibmax %X, fail\n",
+ tx->map_len + (dwords<<2), dd->ipath_ibmaxlen);
+ ret = -EMSGSIZE;
+ goto fail;
+ }
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+retry:
+ if (unlikely(test_bit(IPATH_SDMA_ABORTING, &dd->ipath_sdma_status))) {
+ ret = -EBUSY;
+ goto unlock;
+ }
+
+ if (tx->txreq.sg_count > ipath_sdma_descq_freecnt(dd)) {
+ if (ipath_sdma_make_progress(dd))
+ goto retry;
+ ret = -ENOBUFS;
+ goto unlock;
+ }
+
+ addr = dma_map_single(&dd->pcidev->dev, tx->txreq.map_addr,
+ tx->map_len, DMA_TO_DEVICE);
+ if (dma_mapping_error(addr)) {
+ ret = -EIO;
+ goto unlock;
+ }
+
+ dwoffset = tx->map_len >> 2;
+ make_sdma_desc(dd, sdmadesc, (u64) addr, dwoffset, 0);
+
+ /* SDmaFirstDesc */
+ sdmadesc[0] |= 1ULL << 12;
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_USELARGEBUF)
+ sdmadesc[0] |= 1ULL << 14; /* SDmaUseLargeBuf */
+
+ /* write to the descq */
+ tail = dd->ipath_sdma_descq_tail;
+ descqp = &dd->ipath_sdma_descq[tail].qw[0];
+ *descqp++ = cpu_to_le64(sdmadesc[0]);
+ *descqp++ = cpu_to_le64(sdmadesc[1]);
+
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEDESC)
+ tx->txreq.start_idx = tail;
+
+ /* increment the tail */
+ if (++tail == dd->ipath_sdma_descq_cnt) {
+ tail = 0;
+ descqp = &dd->ipath_sdma_descq[0].qw[0];
+ ++dd->ipath_sdma_generation;
+ }
+
+ sge = &ss->sge;
+ while (dwords) {
+ u32 dw;
+ u32 len;
+
+ len = dwords << 2;
+ if (len > sge->length)
+ len = sge->length;
+ if (len > sge->sge_length)
+ len = sge->sge_length;
+ BUG_ON(len == 0);
+ dw = (len + 3) >> 2;
+ addr = dma_map_single(&dd->pcidev->dev, sge->vaddr, dw << 2,
+ DMA_TO_DEVICE);
+ make_sdma_desc(dd, sdmadesc, (u64) addr, dw, dwoffset);
+ /* SDmaUseLargeBuf has to be set in every descriptor */
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_USELARGEBUF)
+ sdmadesc[0] |= 1ULL << 14;
+ /* write to the descq */
+ *descqp++ = cpu_to_le64(sdmadesc[0]);
+ *descqp++ = cpu_to_le64(sdmadesc[1]);
+
+ /* increment the tail */
+ if (++tail == dd->ipath_sdma_descq_cnt) {
+ tail = 0;
+ descqp = &dd->ipath_sdma_descq[0].qw[0];
+ ++dd->ipath_sdma_generation;
+ }
+ sge->vaddr += len;
+ sge->length -= len;
+ sge->sge_length -= len;
+ if (sge->sge_length == 0) {
+ if (--ss->num_sge)
+ *sge = *ss->sg_list++;
+ } else if (sge->length == 0 && sge->mr != NULL) {
+ if (++sge->n >= IPATH_SEGSZ) {
+ if (++sge->m >= sge->mr->mapsz)
+ break;
+ sge->n = 0;
+ }
+ sge->vaddr =
+ sge->mr->map[sge->m]->segs[sge->n].vaddr;
+ sge->length =
+ sge->mr->map[sge->m]->segs[sge->n].length;
+ }
+
+ dwoffset += dw;
+ dwords -= dw;
+ }
+
+ if (!tail)
+ descqp = &dd->ipath_sdma_descq[dd->ipath_sdma_descq_cnt].qw[0];
+ descqp -= 2;
+ /* SDmaLastDesc */
+ descqp[0] |= __constant_cpu_to_le64(1ULL << 11);
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_INTREQ) {
+ /* SDmaIntReq */
+ descqp[0] |= __constant_cpu_to_le64(1ULL << 15);
+ }
+
+ /* Commit writes to memory and advance the tail on the chip */
+ wmb();
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, tail);
+
+ tx->txreq.next_descq_idx = tail;
+ tx->txreq.callback_status = IPATH_SDMA_TXREQ_S_OK;
+ dd->ipath_sdma_descq_tail = tail;
+ dd->ipath_sdma_descq_added += tx->txreq.sg_count;
+ list_add_tail(&tx->txreq.list, &dd->ipath_sdma_activelist);
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_VL15)
+ vl15_watchdog_enq(dd);
+
+unlock:
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+fail:
+ return ret;
+}
diff --git a/drivers/infiniband/hw/ipath/ipath_srq.c b/drivers/infiniband/hw/ipath/ipath_srq.c
index f772102..e3d80ca 100644
--- a/drivers/infiniband/hw/ipath/ipath_srq.c
+++ b/drivers/infiniband/hw/ipath/ipath_srq.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -245,7 +245,8 @@
sizeof(offset_addr));
if (ret)
goto bail_free;
- udata->outbuf = (void __user *) offset_addr;
+ udata->outbuf =
+ (void __user *) (unsigned long) offset_addr;
ret = ib_copy_to_udata(udata, &offset,
sizeof(offset));
if (ret)
diff --git a/drivers/infiniband/hw/ipath/ipath_stats.c b/drivers/infiniband/hw/ipath/ipath_stats.c
index d2725cd..c8e3d65 100644
--- a/drivers/infiniband/hw/ipath/ipath_stats.c
+++ b/drivers/infiniband/hw/ipath/ipath_stats.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -136,6 +136,7 @@
struct ipath_portdata *pd = dd->ipath_pd[0];
size_t blen = 0;
char buf[128];
+ u32 hdrqtail;
*buf = 0;
if (pd->port_hdrqfull != dd->ipath_p0_hdrqfull) {
@@ -174,17 +175,18 @@
if (blen)
ipath_dbg("%s\n", buf);
- if (pd->port_head != (u32)
- le64_to_cpu(*dd->ipath_hdrqtailptr)) {
+ hdrqtail = ipath_get_hdrqtail(pd);
+ if (pd->port_head != hdrqtail) {
if (dd->ipath_lastport0rcv_cnt ==
ipath_stats.sps_port0pkts) {
ipath_cdbg(PKT, "missing rcv interrupts? "
- "port0 hd=%llx tl=%x; port0pkts %llx\n",
- (unsigned long long)
- le64_to_cpu(*dd->ipath_hdrqtailptr),
- pd->port_head,
+ "port0 hd=%x tl=%x; port0pkts %llx; write"
+ " hd (w/intr)\n",
+ pd->port_head, hdrqtail,
(unsigned long long)
ipath_stats.sps_port0pkts);
+ ipath_write_ureg(dd, ur_rcvhdrhead, hdrqtail |
+ dd->ipath_rhdrhead_intr_off, pd->port_port);
}
dd->ipath_lastport0rcv_cnt = ipath_stats.sps_port0pkts;
}
@@ -290,11 +292,11 @@
&& time_after(jiffies, dd->ipath_unmasktime)) {
char ebuf[256];
int iserr;
- iserr = ipath_decode_err(ebuf, sizeof ebuf,
- dd->ipath_maskederrs);
+ iserr = ipath_decode_err(dd, ebuf, sizeof ebuf,
+ dd->ipath_maskederrs);
if (dd->ipath_maskederrs &
- ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
- INFINIPATH_E_PKTERRS ))
+ ~(INFINIPATH_E_RRCVEGRFULL | INFINIPATH_E_RRCVHDRFULL |
+ INFINIPATH_E_PKTERRS))
ipath_dev_err(dd, "Re-enabling masked errors "
"(%s)\n", ebuf);
else {
@@ -306,17 +308,18 @@
* level.
*/
if (iserr)
- ipath_dbg("Re-enabling queue full errors (%s)\n",
- ebuf);
+ ipath_dbg(
+ "Re-enabling queue full errors (%s)\n",
+ ebuf);
else
ipath_cdbg(ERRPKT, "Re-enabling packet"
- " problem interrupt (%s)\n", ebuf);
+ " problem interrupt (%s)\n", ebuf);
}
/* re-enable masked errors */
dd->ipath_errormask |= dd->ipath_maskederrs;
ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
- dd->ipath_errormask);
+ dd->ipath_errormask);
dd->ipath_maskederrs = 0;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c
index 56dfc8a..a6c8efb 100644
--- a/drivers/infiniband/hw/ipath/ipath_sysfs.c
+++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -34,6 +34,7 @@
#include <linux/ctype.h>
#include "ipath_kernel.h"
+#include "ipath_verbs.h"
#include "ipath_common.h"
/**
@@ -163,6 +164,15 @@
return scnprintf(buf, PAGE_SIZE, "%s", dd->ipath_boardversion);
}
+static ssize_t show_localbus_info(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ /* The string printed here is already newline-terminated. */
+ return scnprintf(buf, PAGE_SIZE, "%s", dd->ipath_lbus_info);
+}
+
static ssize_t show_lmc(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -311,6 +321,8 @@
dd->ipath_guid = new_guid;
dd->ipath_nguid = 1;
+ if (dd->verbs_dev)
+ dd->verbs_dev->ibdev.node_guid = new_guid;
ret = strlen(buf);
goto bail;
@@ -919,21 +931,21 @@
u16 val;
ret = ipath_parse_ushort(buf, &val);
- if (ret < 0 || val > 1)
- goto invalid;
-
- r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_RXPOL_ENB, val);
- if (r < 0) {
- ret = r;
+ if (ret >= 0 && val > 1) {
+ ipath_dev_err(dd,
+ "attempt to set invalid Rx Polarity (enable)\n");
+ ret = -EINVAL;
goto bail;
}
- goto bail;
-invalid:
- ipath_dev_err(dd, "attempt to set invalid Rx Polarity (enable)\n");
+ r = dd->ipath_f_set_ib_cfg(dd, IPATH_IB_CFG_RXPOL_ENB, val);
+ if (r < 0)
+ ret = r;
+
bail:
return ret;
}
+
/*
* Get/Set RX lane-reversal enable. 0=no, 1=yes.
*/
@@ -988,6 +1000,75 @@
.attrs = driver_attributes
};
+static ssize_t store_tempsense(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret, stat;
+ u16 val;
+
+ ret = ipath_parse_ushort(buf, &val);
+ if (ret <= 0) {
+ ipath_dev_err(dd, "attempt to set invalid tempsense config\n");
+ goto bail;
+ }
+ /* If anything but the highest limit, enable T_CRIT_A "interrupt" */
+ stat = ipath_tempsense_write(dd, 9, (val == 0x7f7f) ? 0x80 : 0);
+ if (stat) {
+ ipath_dev_err(dd, "Unable to set tempsense config\n");
+ ret = -1;
+ goto bail;
+ }
+ stat = ipath_tempsense_write(dd, 0xB, (u8) (val & 0xFF));
+ if (stat) {
+ ipath_dev_err(dd, "Unable to set local Tcrit\n");
+ ret = -1;
+ goto bail;
+ }
+ stat = ipath_tempsense_write(dd, 0xD, (u8) (val >> 8));
+ if (stat) {
+ ipath_dev_err(dd, "Unable to set remote Tcrit\n");
+ ret = -1;
+ goto bail;
+ }
+
+bail:
+ return ret;
+}
+
+/*
+ * dump tempsense regs. in decimal, to ease shell-scripts.
+ */
+static ssize_t show_tempsense(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+ int idx;
+ u8 regvals[8];
+
+ ret = -ENXIO;
+ for (idx = 0; idx < 8; ++idx) {
+ if (idx == 6)
+ continue;
+ ret = ipath_tempsense_read(dd, idx);
+ if (ret < 0)
+ break;
+ regvals[idx] = ret;
+ }
+ if (idx == 8)
+ ret = scnprintf(buf, PAGE_SIZE, "%d %d %02X %02X %d %d\n",
+ *(signed char *)(regvals),
+ *(signed char *)(regvals + 1),
+ regvals[2], regvals[3],
+ *(signed char *)(regvals + 5),
+ *(signed char *)(regvals + 7));
+ return ret;
+}
+
struct attribute_group *ipath_driver_attr_groups[] = {
&driver_attr_group,
NULL,
@@ -1011,10 +1092,13 @@
static DEVICE_ATTR(rx_pol_inv, S_IWUSR, NULL, store_rx_pol_inv);
static DEVICE_ATTR(led_override, S_IWUSR, NULL, store_led_override);
static DEVICE_ATTR(logged_errors, S_IRUGO, show_logged_errs, NULL);
+static DEVICE_ATTR(localbus_info, S_IRUGO, show_localbus_info, NULL);
static DEVICE_ATTR(jint_max_packets, S_IWUSR | S_IRUGO,
show_jint_max_packets, store_jint_max_packets);
static DEVICE_ATTR(jint_idle_ticks, S_IWUSR | S_IRUGO,
show_jint_idle_ticks, store_jint_idle_ticks);
+static DEVICE_ATTR(tempsense, S_IWUSR | S_IRUGO,
+ show_tempsense, store_tempsense);
static struct attribute *dev_attributes[] = {
&dev_attr_guid.attr,
@@ -1034,6 +1118,8 @@
&dev_attr_rx_pol_inv.attr,
&dev_attr_led_override.attr,
&dev_attr_logged_errors.attr,
+ &dev_attr_tempsense.attr,
+ &dev_attr_localbus_info.attr,
NULL
};
diff --git a/drivers/infiniband/hw/ipath/ipath_uc.c b/drivers/infiniband/hw/ipath/ipath_uc.c
index 2dd8de2..bfe8926 100644
--- a/drivers/infiniband/hw/ipath/ipath_uc.c
+++ b/drivers/infiniband/hw/ipath/ipath_uc.c
@@ -94,7 +94,7 @@
qp->s_state =
OP(SEND_ONLY_WITH_IMMEDIATE);
/* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.imm_data;
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
}
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
@@ -123,7 +123,7 @@
qp->s_state =
OP(RDMA_WRITE_ONLY_WITH_IMMEDIATE);
/* Immediate data comes after the RETH */
- ohdr->u.rc.imm_data = wqe->wr.imm_data;
+ ohdr->u.rc.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
bth0 |= 1 << 23;
@@ -152,7 +152,7 @@
else {
qp->s_state = OP(SEND_LAST_WITH_IMMEDIATE);
/* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.imm_data;
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
}
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
@@ -177,7 +177,7 @@
qp->s_state =
OP(RDMA_WRITE_LAST_WITH_IMMEDIATE);
/* Immediate data comes after the BTH */
- ohdr->u.imm_data = wqe->wr.imm_data;
+ ohdr->u.imm_data = wqe->wr.ex.imm_data;
hwords += 1;
if (wqe->wr.send_flags & IB_SEND_SOLICITED)
bth0 |= 1 << 23;
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index de67eed..8b6a261 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -95,7 +95,7 @@
if (swqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
wc.wc_flags = IB_WC_WITH_IMM;
- wc.imm_data = swqe->wr.imm_data;
+ wc.imm_data = swqe->wr.ex.imm_data;
} else {
wc.wc_flags = 0;
wc.imm_data = 0;
@@ -303,6 +303,7 @@
qp->s_hdrwords = 7;
qp->s_cur_size = wqe->length;
qp->s_cur_sge = &qp->s_sge;
+ qp->s_dmult = ah_attr->static_rate;
qp->s_wqe = wqe;
qp->s_sge.sge = wqe->sg_list[0];
qp->s_sge.sg_list = wqe->sg_list + 1;
@@ -326,7 +327,7 @@
}
if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
qp->s_hdrwords++;
- ohdr->u.ud.imm_data = wqe->wr.imm_data;
+ ohdr->u.ud.imm_data = wqe->wr.ex.imm_data;
bth0 = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE << 24;
} else
bth0 = IB_OPCODE_UD_SEND_ONLY << 24;
diff --git a/drivers/infiniband/hw/ipath/ipath_user_sdma.c b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
new file mode 100644
index 0000000..86e0169
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
@@ -0,0 +1,879 @@
+/*
+ * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/uio.h>
+#include <linux/rbtree.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+#include "ipath_kernel.h"
+#include "ipath_user_sdma.h"
+
+/* minimum size of header */
+#define IPATH_USER_SDMA_MIN_HEADER_LENGTH 64
+/* expected size of headers (for dma_pool) */
+#define IPATH_USER_SDMA_EXP_HEADER_LENGTH 64
+/* length mask in PBC (lower 11 bits) */
+#define IPATH_PBC_LENGTH_MASK ((1 << 11) - 1)
+
+struct ipath_user_sdma_pkt {
+ u8 naddr; /* dimension of addr (1..3) ... */
+ u32 counter; /* sdma pkts queued counter for this entry */
+ u64 added; /* global descq number of entries */
+
+ struct {
+ u32 offset; /* offset for kvaddr, addr */
+ u32 length; /* length in page */
+ u8 put_page; /* should we put_page? */
+ u8 dma_mapped; /* is page dma_mapped? */
+ struct page *page; /* may be NULL (coherent mem) */
+ void *kvaddr; /* FIXME: only for pio hack */
+ dma_addr_t addr;
+ } addr[4]; /* max pages, any more and we coalesce */
+ struct list_head list; /* list element */
+};
+
+struct ipath_user_sdma_queue {
+ /*
+ * pkts sent to dma engine are queued on this
+ * list head. the type of the elements of this
+ * list are struct ipath_user_sdma_pkt...
+ */
+ struct list_head sent;
+
+ /* headers with expected length are allocated from here... */
+ char header_cache_name[64];
+ struct dma_pool *header_cache;
+
+ /* packets are allocated from the slab cache... */
+ char pkt_slab_name[64];
+ struct kmem_cache *pkt_slab;
+
+ /* as packets go on the queued queue, they are counted... */
+ u32 counter;
+ u32 sent_counter;
+
+ /* dma page table */
+ struct rb_root dma_pages_root;
+
+ /* protect everything above... */
+ struct mutex lock;
+};
+
+struct ipath_user_sdma_queue *
+ipath_user_sdma_queue_create(struct device *dev, int unit, int port, int sport)
+{
+ struct ipath_user_sdma_queue *pq =
+ kmalloc(sizeof(struct ipath_user_sdma_queue), GFP_KERNEL);
+
+ if (!pq)
+ goto done;
+
+ pq->counter = 0;
+ pq->sent_counter = 0;
+ INIT_LIST_HEAD(&pq->sent);
+
+ mutex_init(&pq->lock);
+
+ snprintf(pq->pkt_slab_name, sizeof(pq->pkt_slab_name),
+ "ipath-user-sdma-pkts-%u-%02u.%02u", unit, port, sport);
+ pq->pkt_slab = kmem_cache_create(pq->pkt_slab_name,
+ sizeof(struct ipath_user_sdma_pkt),
+ 0, 0, NULL);
+
+ if (!pq->pkt_slab)
+ goto err_kfree;
+
+ snprintf(pq->header_cache_name, sizeof(pq->header_cache_name),
+ "ipath-user-sdma-headers-%u-%02u.%02u", unit, port, sport);
+ pq->header_cache = dma_pool_create(pq->header_cache_name,
+ dev,
+ IPATH_USER_SDMA_EXP_HEADER_LENGTH,
+ 4, 0);
+ if (!pq->header_cache)
+ goto err_slab;
+
+ pq->dma_pages_root = RB_ROOT;
+
+ goto done;
+
+err_slab:
+ kmem_cache_destroy(pq->pkt_slab);
+err_kfree:
+ kfree(pq);
+ pq = NULL;
+
+done:
+ return pq;
+}
+
+static void ipath_user_sdma_init_frag(struct ipath_user_sdma_pkt *pkt,
+ int i, size_t offset, size_t len,
+ int put_page, int dma_mapped,
+ struct page *page,
+ void *kvaddr, dma_addr_t dma_addr)
+{
+ pkt->addr[i].offset = offset;
+ pkt->addr[i].length = len;
+ pkt->addr[i].put_page = put_page;
+ pkt->addr[i].dma_mapped = dma_mapped;
+ pkt->addr[i].page = page;
+ pkt->addr[i].kvaddr = kvaddr;
+ pkt->addr[i].addr = dma_addr;
+}
+
+static void ipath_user_sdma_init_header(struct ipath_user_sdma_pkt *pkt,
+ u32 counter, size_t offset,
+ size_t len, int dma_mapped,
+ struct page *page,
+ void *kvaddr, dma_addr_t dma_addr)
+{
+ pkt->naddr = 1;
+ pkt->counter = counter;
+ ipath_user_sdma_init_frag(pkt, 0, offset, len, 0, dma_mapped, page,
+ kvaddr, dma_addr);
+}
+
+/* we've too many pages in the iovec, coalesce to a single page */
+static int ipath_user_sdma_coalesce(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_pkt *pkt,
+ const struct iovec *iov,
+ unsigned long niov) {
+ int ret = 0;
+ struct page *page = alloc_page(GFP_KERNEL);
+ void *mpage_save;
+ char *mpage;
+ int i;
+ int len = 0;
+ dma_addr_t dma_addr;
+
+ if (!page) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ mpage = kmap(page);
+ mpage_save = mpage;
+ for (i = 0; i < niov; i++) {
+ int cfur;
+
+ cfur = copy_from_user(mpage,
+ iov[i].iov_base, iov[i].iov_len);
+ if (cfur) {
+ ret = -EFAULT;
+ goto free_unmap;
+ }
+
+ mpage += iov[i].iov_len;
+ len += iov[i].iov_len;
+ }
+
+ dma_addr = dma_map_page(&dd->pcidev->dev, page, 0, len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dma_addr)) {
+ ret = -ENOMEM;
+ goto free_unmap;
+ }
+
+ ipath_user_sdma_init_frag(pkt, 1, 0, len, 0, 1, page, mpage_save,
+ dma_addr);
+ pkt->naddr = 2;
+
+ goto done;
+
+free_unmap:
+ kunmap(page);
+ __free_page(page);
+done:
+ return ret;
+}
+
+/* how many pages in this iovec element? */
+static int ipath_user_sdma_num_pages(const struct iovec *iov)
+{
+ const unsigned long addr = (unsigned long) iov->iov_base;
+ const unsigned long len = iov->iov_len;
+ const unsigned long spage = addr & PAGE_MASK;
+ const unsigned long epage = (addr + len - 1) & PAGE_MASK;
+
+ return 1 + ((epage - spage) >> PAGE_SHIFT);
+}
+
+/* truncate length to page boundry */
+static int ipath_user_sdma_page_length(unsigned long addr, unsigned long len)
+{
+ const unsigned long offset = addr & ~PAGE_MASK;
+
+ return ((offset + len) > PAGE_SIZE) ? (PAGE_SIZE - offset) : len;
+}
+
+static void ipath_user_sdma_free_pkt_frag(struct device *dev,
+ struct ipath_user_sdma_queue *pq,
+ struct ipath_user_sdma_pkt *pkt,
+ int frag)
+{
+ const int i = frag;
+
+ if (pkt->addr[i].page) {
+ if (pkt->addr[i].dma_mapped)
+ dma_unmap_page(dev,
+ pkt->addr[i].addr,
+ pkt->addr[i].length,
+ DMA_TO_DEVICE);
+
+ if (pkt->addr[i].kvaddr)
+ kunmap(pkt->addr[i].page);
+
+ if (pkt->addr[i].put_page)
+ put_page(pkt->addr[i].page);
+ else
+ __free_page(pkt->addr[i].page);
+ } else if (pkt->addr[i].kvaddr)
+ /* free coherent mem from cache... */
+ dma_pool_free(pq->header_cache,
+ pkt->addr[i].kvaddr, pkt->addr[i].addr);
+}
+
+/* return number of pages pinned... */
+static int ipath_user_sdma_pin_pages(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_pkt *pkt,
+ unsigned long addr, int tlen, int npages)
+{
+ struct page *pages[2];
+ int j;
+ int ret;
+
+ ret = get_user_pages(current, current->mm, addr,
+ npages, 0, 1, pages, NULL);
+
+ if (ret != npages) {
+ int i;
+
+ for (i = 0; i < ret; i++)
+ put_page(pages[i]);
+
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ for (j = 0; j < npages; j++) {
+ /* map the pages... */
+ const int flen =
+ ipath_user_sdma_page_length(addr, tlen);
+ dma_addr_t dma_addr =
+ dma_map_page(&dd->pcidev->dev,
+ pages[j], 0, flen, DMA_TO_DEVICE);
+ unsigned long fofs = addr & ~PAGE_MASK;
+
+ if (dma_mapping_error(dma_addr)) {
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ ipath_user_sdma_init_frag(pkt, pkt->naddr, fofs, flen, 1, 1,
+ pages[j], kmap(pages[j]),
+ dma_addr);
+
+ pkt->naddr++;
+ addr += flen;
+ tlen -= flen;
+ }
+
+done:
+ return ret;
+}
+
+static int ipath_user_sdma_pin_pkt(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ struct ipath_user_sdma_pkt *pkt,
+ const struct iovec *iov,
+ unsigned long niov)
+{
+ int ret = 0;
+ unsigned long idx;
+
+ for (idx = 0; idx < niov; idx++) {
+ const int npages = ipath_user_sdma_num_pages(iov + idx);
+ const unsigned long addr = (unsigned long) iov[idx].iov_base;
+
+ ret = ipath_user_sdma_pin_pages(dd, pkt,
+ addr, iov[idx].iov_len,
+ npages);
+ if (ret < 0)
+ goto free_pkt;
+ }
+
+ goto done;
+
+free_pkt:
+ for (idx = 0; idx < pkt->naddr; idx++)
+ ipath_user_sdma_free_pkt_frag(&dd->pcidev->dev, pq, pkt, idx);
+
+done:
+ return ret;
+}
+
+static int ipath_user_sdma_init_payload(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ struct ipath_user_sdma_pkt *pkt,
+ const struct iovec *iov,
+ unsigned long niov, int npages)
+{
+ int ret = 0;
+
+ if (npages >= ARRAY_SIZE(pkt->addr))
+ ret = ipath_user_sdma_coalesce(dd, pkt, iov, niov);
+ else
+ ret = ipath_user_sdma_pin_pkt(dd, pq, pkt, iov, niov);
+
+ return ret;
+}
+
+/* free a packet list -- return counter value of last packet */
+static void ipath_user_sdma_free_pkt_list(struct device *dev,
+ struct ipath_user_sdma_queue *pq,
+ struct list_head *list)
+{
+ struct ipath_user_sdma_pkt *pkt, *pkt_next;
+
+ list_for_each_entry_safe(pkt, pkt_next, list, list) {
+ int i;
+
+ for (i = 0; i < pkt->naddr; i++)
+ ipath_user_sdma_free_pkt_frag(dev, pq, pkt, i);
+
+ kmem_cache_free(pq->pkt_slab, pkt);
+ }
+}
+
+/*
+ * copy headers, coalesce etc -- pq->lock must be held
+ *
+ * we queue all the packets to list, returning the
+ * number of bytes total. list must be empty initially,
+ * as, if there is an error we clean it...
+ */
+static int ipath_user_sdma_queue_pkts(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ struct list_head *list,
+ const struct iovec *iov,
+ unsigned long niov,
+ int maxpkts)
+{
+ unsigned long idx = 0;
+ int ret = 0;
+ int npkts = 0;
+ struct page *page = NULL;
+ __le32 *pbc;
+ dma_addr_t dma_addr;
+ struct ipath_user_sdma_pkt *pkt = NULL;
+ size_t len;
+ size_t nw;
+ u32 counter = pq->counter;
+ int dma_mapped = 0;
+
+ while (idx < niov && npkts < maxpkts) {
+ const unsigned long addr = (unsigned long) iov[idx].iov_base;
+ const unsigned long idx_save = idx;
+ unsigned pktnw;
+ unsigned pktnwc;
+ int nfrags = 0;
+ int npages = 0;
+ int cfur;
+
+ dma_mapped = 0;
+ len = iov[idx].iov_len;
+ nw = len >> 2;
+ page = NULL;
+
+ pkt = kmem_cache_alloc(pq->pkt_slab, GFP_KERNEL);
+ if (!pkt) {
+ ret = -ENOMEM;
+ goto free_list;
+ }
+
+ if (len < IPATH_USER_SDMA_MIN_HEADER_LENGTH ||
+ len > PAGE_SIZE || len & 3 || addr & 3) {
+ ret = -EINVAL;
+ goto free_pkt;
+ }
+
+ if (len == IPATH_USER_SDMA_EXP_HEADER_LENGTH)
+ pbc = dma_pool_alloc(pq->header_cache, GFP_KERNEL,
+ &dma_addr);
+ else
+ pbc = NULL;
+
+ if (!pbc) {
+ page = alloc_page(GFP_KERNEL);
+ if (!page) {
+ ret = -ENOMEM;
+ goto free_pkt;
+ }
+ pbc = kmap(page);
+ }
+
+ cfur = copy_from_user(pbc, iov[idx].iov_base, len);
+ if (cfur) {
+ ret = -EFAULT;
+ goto free_pbc;
+ }
+
+ /*
+ * this assignment is a bit strange. it's because the
+ * the pbc counts the number of 32 bit words in the full
+ * packet _except_ the first word of the pbc itself...
+ */
+ pktnwc = nw - 1;
+
+ /*
+ * pktnw computation yields the number of 32 bit words
+ * that the caller has indicated in the PBC. note that
+ * this is one less than the total number of words that
+ * goes to the send DMA engine as the first 32 bit word
+ * of the PBC itself is not counted. Armed with this count,
+ * we can verify that the packet is consistent with the
+ * iovec lengths.
+ */
+ pktnw = le32_to_cpu(*pbc) & IPATH_PBC_LENGTH_MASK;
+ if (pktnw < pktnwc || pktnw > pktnwc + (PAGE_SIZE >> 2)) {
+ ret = -EINVAL;
+ goto free_pbc;
+ }
+
+
+ idx++;
+ while (pktnwc < pktnw && idx < niov) {
+ const size_t slen = iov[idx].iov_len;
+ const unsigned long faddr =
+ (unsigned long) iov[idx].iov_base;
+
+ if (slen & 3 || faddr & 3 || !slen ||
+ slen > PAGE_SIZE) {
+ ret = -EINVAL;
+ goto free_pbc;
+ }
+
+ npages++;
+ if ((faddr & PAGE_MASK) !=
+ ((faddr + slen - 1) & PAGE_MASK))
+ npages++;
+
+ pktnwc += slen >> 2;
+ idx++;
+ nfrags++;
+ }
+
+ if (pktnwc != pktnw) {
+ ret = -EINVAL;
+ goto free_pbc;
+ }
+
+ if (page) {
+ dma_addr = dma_map_page(&dd->pcidev->dev,
+ page, 0, len, DMA_TO_DEVICE);
+ if (dma_mapping_error(dma_addr)) {
+ ret = -ENOMEM;
+ goto free_pbc;
+ }
+
+ dma_mapped = 1;
+ }
+
+ ipath_user_sdma_init_header(pkt, counter, 0, len, dma_mapped,
+ page, pbc, dma_addr);
+
+ if (nfrags) {
+ ret = ipath_user_sdma_init_payload(dd, pq, pkt,
+ iov + idx_save + 1,
+ nfrags, npages);
+ if (ret < 0)
+ goto free_pbc_dma;
+ }
+
+ counter++;
+ npkts++;
+
+ list_add_tail(&pkt->list, list);
+ }
+
+ ret = idx;
+ goto done;
+
+free_pbc_dma:
+ if (dma_mapped)
+ dma_unmap_page(&dd->pcidev->dev, dma_addr, len, DMA_TO_DEVICE);
+free_pbc:
+ if (page) {
+ kunmap(page);
+ __free_page(page);
+ } else
+ dma_pool_free(pq->header_cache, pbc, dma_addr);
+free_pkt:
+ kmem_cache_free(pq->pkt_slab, pkt);
+free_list:
+ ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, list);
+done:
+ return ret;
+}
+
+static void ipath_user_sdma_set_complete_counter(struct ipath_user_sdma_queue *pq,
+ u32 c)
+{
+ pq->sent_counter = c;
+}
+
+/* try to clean out queue -- needs pq->lock */
+static int ipath_user_sdma_queue_clean(const struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq)
+{
+ struct list_head free_list;
+ struct ipath_user_sdma_pkt *pkt;
+ struct ipath_user_sdma_pkt *pkt_prev;
+ int ret = 0;
+
+ INIT_LIST_HEAD(&free_list);
+
+ list_for_each_entry_safe(pkt, pkt_prev, &pq->sent, list) {
+ s64 descd = dd->ipath_sdma_descq_removed - pkt->added;
+
+ if (descd < 0)
+ break;
+
+ list_move_tail(&pkt->list, &free_list);
+
+ /* one more packet cleaned */
+ ret++;
+ }
+
+ if (!list_empty(&free_list)) {
+ u32 counter;
+
+ pkt = list_entry(free_list.prev,
+ struct ipath_user_sdma_pkt, list);
+ counter = pkt->counter;
+
+ ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &free_list);
+ ipath_user_sdma_set_complete_counter(pq, counter);
+ }
+
+ return ret;
+}
+
+void ipath_user_sdma_queue_destroy(struct ipath_user_sdma_queue *pq)
+{
+ if (!pq)
+ return;
+
+ kmem_cache_destroy(pq->pkt_slab);
+ dma_pool_destroy(pq->header_cache);
+ kfree(pq);
+}
+
+/* clean descriptor queue, returns > 0 if some elements cleaned */
+static int ipath_user_sdma_hwqueue_clean(struct ipath_devdata *dd)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+ ret = ipath_sdma_make_progress(dd);
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ return ret;
+}
+
+/* we're in close, drain packets so that we can cleanup successfully... */
+void ipath_user_sdma_queue_drain(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq)
+{
+ int i;
+
+ if (!pq)
+ return;
+
+ for (i = 0; i < 100; i++) {
+ mutex_lock(&pq->lock);
+ if (list_empty(&pq->sent)) {
+ mutex_unlock(&pq->lock);
+ break;
+ }
+ ipath_user_sdma_hwqueue_clean(dd);
+ ipath_user_sdma_queue_clean(dd, pq);
+ mutex_unlock(&pq->lock);
+ msleep(10);
+ }
+
+ if (!list_empty(&pq->sent)) {
+ struct list_head free_list;
+
+ printk(KERN_INFO "drain: lists not empty: forcing!\n");
+ INIT_LIST_HEAD(&free_list);
+ mutex_lock(&pq->lock);
+ list_splice_init(&pq->sent, &free_list);
+ ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &free_list);
+ mutex_unlock(&pq->lock);
+ }
+}
+
+static inline __le64 ipath_sdma_make_desc0(struct ipath_devdata *dd,
+ u64 addr, u64 dwlen, u64 dwoffset)
+{
+ return cpu_to_le64(/* SDmaPhyAddr[31:0] */
+ ((addr & 0xfffffffcULL) << 32) |
+ /* SDmaGeneration[1:0] */
+ ((dd->ipath_sdma_generation & 3ULL) << 30) |
+ /* SDmaDwordCount[10:0] */
+ ((dwlen & 0x7ffULL) << 16) |
+ /* SDmaBufOffset[12:2] */
+ (dwoffset & 0x7ffULL));
+}
+
+static inline __le64 ipath_sdma_make_first_desc0(__le64 descq)
+{
+ return descq | __constant_cpu_to_le64(1ULL << 12);
+}
+
+static inline __le64 ipath_sdma_make_last_desc0(__le64 descq)
+{
+ /* last */ /* dma head */
+ return descq | __constant_cpu_to_le64(1ULL << 11 | 1ULL << 13);
+}
+
+static inline __le64 ipath_sdma_make_desc1(u64 addr)
+{
+ /* SDmaPhyAddr[47:32] */
+ return cpu_to_le64(addr >> 32);
+}
+
+static void ipath_user_sdma_send_frag(struct ipath_devdata *dd,
+ struct ipath_user_sdma_pkt *pkt, int idx,
+ unsigned ofs, u16 tail)
+{
+ const u64 addr = (u64) pkt->addr[idx].addr +
+ (u64) pkt->addr[idx].offset;
+ const u64 dwlen = (u64) pkt->addr[idx].length / 4;
+ __le64 *descqp;
+ __le64 descq0;
+
+ descqp = &dd->ipath_sdma_descq[tail].qw[0];
+
+ descq0 = ipath_sdma_make_desc0(dd, addr, dwlen, ofs);
+ if (idx == 0)
+ descq0 = ipath_sdma_make_first_desc0(descq0);
+ if (idx == pkt->naddr - 1)
+ descq0 = ipath_sdma_make_last_desc0(descq0);
+
+ descqp[0] = descq0;
+ descqp[1] = ipath_sdma_make_desc1(addr);
+}
+
+/* pq->lock must be held, get packets on the wire... */
+static int ipath_user_sdma_push_pkts(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ struct list_head *pktlist)
+{
+ int ret = 0;
+ unsigned long flags;
+ u16 tail;
+
+ if (list_empty(pktlist))
+ return 0;
+
+ if (unlikely(!(dd->ipath_flags & IPATH_LINKACTIVE)))
+ return -ECOMM;
+
+ spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
+
+ if (unlikely(dd->ipath_sdma_status & IPATH_SDMA_ABORT_MASK)) {
+ ret = -ECOMM;
+ goto unlock;
+ }
+
+ tail = dd->ipath_sdma_descq_tail;
+ while (!list_empty(pktlist)) {
+ struct ipath_user_sdma_pkt *pkt =
+ list_entry(pktlist->next, struct ipath_user_sdma_pkt,
+ list);
+ int i;
+ unsigned ofs = 0;
+ u16 dtail = tail;
+
+ if (pkt->naddr > ipath_sdma_descq_freecnt(dd))
+ goto unlock_check_tail;
+
+ for (i = 0; i < pkt->naddr; i++) {
+ ipath_user_sdma_send_frag(dd, pkt, i, ofs, tail);
+ ofs += pkt->addr[i].length >> 2;
+
+ if (++tail == dd->ipath_sdma_descq_cnt) {
+ tail = 0;
+ ++dd->ipath_sdma_generation;
+ }
+ }
+
+ if ((ofs<<2) > dd->ipath_ibmaxlen) {
+ ipath_dbg("packet size %X > ibmax %X, fail\n",
+ ofs<<2, dd->ipath_ibmaxlen);
+ ret = -EMSGSIZE;
+ goto unlock;
+ }
+
+ /*
+ * if the packet is >= 2KB mtu equivalent, we have to use
+ * the large buffers, and have to mark each descriptor as
+ * part of a large buffer packet.
+ */
+ if (ofs >= IPATH_SMALLBUF_DWORDS) {
+ for (i = 0; i < pkt->naddr; i++) {
+ dd->ipath_sdma_descq[dtail].qw[0] |=
+ __constant_cpu_to_le64(1ULL << 14);
+ if (++dtail == dd->ipath_sdma_descq_cnt)
+ dtail = 0;
+ }
+ }
+
+ dd->ipath_sdma_descq_added += pkt->naddr;
+ pkt->added = dd->ipath_sdma_descq_added;
+ list_move_tail(&pkt->list, &pq->sent);
+ ret++;
+ }
+
+unlock_check_tail:
+ /* advance the tail on the chip if necessary */
+ if (dd->ipath_sdma_descq_tail != tail) {
+ wmb();
+ ipath_write_kreg(dd, dd->ipath_kregs->kr_senddmatail, tail);
+ dd->ipath_sdma_descq_tail = tail;
+ }
+
+unlock:
+ spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
+
+ return ret;
+}
+
+int ipath_user_sdma_writev(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ const struct iovec *iov,
+ unsigned long dim)
+{
+ int ret = 0;
+ struct list_head list;
+ int npkts = 0;
+
+ INIT_LIST_HEAD(&list);
+
+ mutex_lock(&pq->lock);
+
+ if (dd->ipath_sdma_descq_added != dd->ipath_sdma_descq_removed) {
+ ipath_user_sdma_hwqueue_clean(dd);
+ ipath_user_sdma_queue_clean(dd, pq);
+ }
+
+ while (dim) {
+ const int mxp = 8;
+
+ down_write(¤t->mm->mmap_sem);
+ ret = ipath_user_sdma_queue_pkts(dd, pq, &list, iov, dim, mxp);
+ up_write(¤t->mm->mmap_sem);
+
+ if (ret <= 0)
+ goto done_unlock;
+ else {
+ dim -= ret;
+ iov += ret;
+ }
+
+ /* force packets onto the sdma hw queue... */
+ if (!list_empty(&list)) {
+ /*
+ * lazily clean hw queue. the 4 is a guess of about
+ * how many sdma descriptors a packet will take (it
+ * doesn't have to be perfect).
+ */
+ if (ipath_sdma_descq_freecnt(dd) < ret * 4) {
+ ipath_user_sdma_hwqueue_clean(dd);
+ ipath_user_sdma_queue_clean(dd, pq);
+ }
+
+ ret = ipath_user_sdma_push_pkts(dd, pq, &list);
+ if (ret < 0)
+ goto done_unlock;
+ else {
+ npkts += ret;
+ pq->counter += ret;
+
+ if (!list_empty(&list))
+ goto done_unlock;
+ }
+ }
+ }
+
+done_unlock:
+ if (!list_empty(&list))
+ ipath_user_sdma_free_pkt_list(&dd->pcidev->dev, pq, &list);
+ mutex_unlock(&pq->lock);
+
+ return (ret < 0) ? ret : npkts;
+}
+
+int ipath_user_sdma_make_progress(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq)
+{
+ int ret = 0;
+
+ mutex_lock(&pq->lock);
+ ipath_user_sdma_hwqueue_clean(dd);
+ ret = ipath_user_sdma_queue_clean(dd, pq);
+ mutex_unlock(&pq->lock);
+
+ return ret;
+}
+
+u32 ipath_user_sdma_complete_counter(const struct ipath_user_sdma_queue *pq)
+{
+ return pq->sent_counter;
+}
+
+u32 ipath_user_sdma_inflight_counter(struct ipath_user_sdma_queue *pq)
+{
+ return pq->counter;
+}
+
diff --git a/drivers/infiniband/hw/ipath/ipath_user_sdma.h b/drivers/infiniband/hw/ipath/ipath_user_sdma.h
new file mode 100644
index 0000000..e70946c
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_user_sdma.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2007, 2008 QLogic Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/device.h>
+
+struct ipath_user_sdma_queue;
+
+struct ipath_user_sdma_queue *
+ipath_user_sdma_queue_create(struct device *dev, int unit, int port, int sport);
+void ipath_user_sdma_queue_destroy(struct ipath_user_sdma_queue *pq);
+
+int ipath_user_sdma_writev(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq,
+ const struct iovec *iov,
+ unsigned long dim);
+
+int ipath_user_sdma_make_progress(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq);
+
+int ipath_user_sdma_pkt_sent(const struct ipath_user_sdma_queue *pq,
+ u32 counter);
+void ipath_user_sdma_queue_drain(struct ipath_devdata *dd,
+ struct ipath_user_sdma_queue *pq);
+
+u32 ipath_user_sdma_complete_counter(const struct ipath_user_sdma_queue *pq);
+u32 ipath_user_sdma_inflight_counter(struct ipath_user_sdma_queue *pq);
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index 32d8f88..320a6d0 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -242,6 +242,93 @@
ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 1);
}
+/*
+ * Count the number of DMA descriptors needed to send length bytes of data.
+ * Don't modify the ipath_sge_state to get the count.
+ * Return zero if any of the segments is not aligned.
+ */
+static u32 ipath_count_sge(struct ipath_sge_state *ss, u32 length)
+{
+ struct ipath_sge *sg_list = ss->sg_list;
+ struct ipath_sge sge = ss->sge;
+ u8 num_sge = ss->num_sge;
+ u32 ndesc = 1; /* count the header */
+
+ while (length) {
+ u32 len = sge.length;
+
+ if (len > length)
+ len = length;
+ if (len > sge.sge_length)
+ len = sge.sge_length;
+ BUG_ON(len == 0);
+ if (((long) sge.vaddr & (sizeof(u32) - 1)) ||
+ (len != length && (len & (sizeof(u32) - 1)))) {
+ ndesc = 0;
+ break;
+ }
+ ndesc++;
+ sge.vaddr += len;
+ sge.length -= len;
+ sge.sge_length -= len;
+ if (sge.sge_length == 0) {
+ if (--num_sge)
+ sge = *sg_list++;
+ } else if (sge.length == 0 && sge.mr != NULL) {
+ if (++sge.n >= IPATH_SEGSZ) {
+ if (++sge.m >= sge.mr->mapsz)
+ break;
+ sge.n = 0;
+ }
+ sge.vaddr =
+ sge.mr->map[sge.m]->segs[sge.n].vaddr;
+ sge.length =
+ sge.mr->map[sge.m]->segs[sge.n].length;
+ }
+ length -= len;
+ }
+ return ndesc;
+}
+
+/*
+ * Copy from the SGEs to the data buffer.
+ */
+static void ipath_copy_from_sge(void *data, struct ipath_sge_state *ss,
+ u32 length)
+{
+ struct ipath_sge *sge = &ss->sge;
+
+ while (length) {
+ u32 len = sge->length;
+
+ if (len > length)
+ len = length;
+ if (len > sge->sge_length)
+ len = sge->sge_length;
+ BUG_ON(len == 0);
+ memcpy(data, sge->vaddr, len);
+ sge->vaddr += len;
+ sge->length -= len;
+ sge->sge_length -= len;
+ if (sge->sge_length == 0) {
+ if (--ss->num_sge)
+ *sge = *ss->sg_list++;
+ } else if (sge->length == 0 && sge->mr != NULL) {
+ if (++sge->n >= IPATH_SEGSZ) {
+ if (++sge->m >= sge->mr->mapsz)
+ break;
+ sge->n = 0;
+ }
+ sge->vaddr =
+ sge->mr->map[sge->m]->segs[sge->n].vaddr;
+ sge->length =
+ sge->mr->map[sge->m]->segs[sge->n].length;
+ }
+ data += len;
+ length -= len;
+ }
+}
+
/**
* ipath_post_one_send - post one RC, UC, or UD send work request
* @qp: the QP to post on
@@ -866,27 +953,257 @@
__raw_writel(last, piobuf);
}
-static int ipath_verbs_send_pio(struct ipath_qp *qp, u32 *hdr, u32 hdrwords,
+/*
+ * Convert IB rate to delay multiplier.
+ */
+unsigned ipath_ib_rate_to_mult(enum ib_rate rate)
+{
+ switch (rate) {
+ case IB_RATE_2_5_GBPS: return 8;
+ case IB_RATE_5_GBPS: return 4;
+ case IB_RATE_10_GBPS: return 2;
+ case IB_RATE_20_GBPS: return 1;
+ default: return 0;
+ }
+}
+
+/*
+ * Convert delay multiplier to IB rate
+ */
+static enum ib_rate ipath_mult_to_ib_rate(unsigned mult)
+{
+ switch (mult) {
+ case 8: return IB_RATE_2_5_GBPS;
+ case 4: return IB_RATE_5_GBPS;
+ case 2: return IB_RATE_10_GBPS;
+ case 1: return IB_RATE_20_GBPS;
+ default: return IB_RATE_PORT_CURRENT;
+ }
+}
+
+static inline struct ipath_verbs_txreq *get_txreq(struct ipath_ibdev *dev)
+{
+ struct ipath_verbs_txreq *tx = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ if (!list_empty(&dev->txreq_free)) {
+ struct list_head *l = dev->txreq_free.next;
+
+ list_del(l);
+ tx = list_entry(l, struct ipath_verbs_txreq, txreq.list);
+ }
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+ return tx;
+}
+
+static inline void put_txreq(struct ipath_ibdev *dev,
+ struct ipath_verbs_txreq *tx)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->pending_lock, flags);
+ list_add(&tx->txreq.list, &dev->txreq_free);
+ spin_unlock_irqrestore(&dev->pending_lock, flags);
+}
+
+static void sdma_complete(void *cookie, int status)
+{
+ struct ipath_verbs_txreq *tx = cookie;
+ struct ipath_qp *qp = tx->qp;
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+
+ /* Generate a completion queue entry if needed */
+ if (qp->ibqp.qp_type != IB_QPT_RC && tx->wqe) {
+ enum ib_wc_status ibs = status == IPATH_SDMA_TXREQ_S_OK ?
+ IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR;
+
+ ipath_send_complete(qp, tx->wqe, ibs);
+ }
+
+ if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF)
+ kfree(tx->txreq.map_addr);
+ put_txreq(dev, tx);
+
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+}
+
+/*
+ * Compute the number of clock cycles of delay before sending the next packet.
+ * The multipliers reflect the number of clocks for the fastest rate so
+ * one tick at 4xDDR is 8 ticks at 1xSDR.
+ * If the destination port will take longer to receive a packet than
+ * the outgoing link can send it, we need to delay sending the next packet
+ * by the difference in time it takes the receiver to receive and the sender
+ * to send this packet.
+ * Note that this delay is always correct for UC and RC but not always
+ * optimal for UD. For UD, the destination HCA can be different for each
+ * packet, in which case, we could send packets to a different destination
+ * while "waiting" for the delay. The overhead for doing this without
+ * HW support is more than just paying the cost of delaying some packets
+ * unnecessarily.
+ */
+static inline unsigned ipath_pkt_delay(u32 plen, u8 snd_mult, u8 rcv_mult)
+{
+ return (rcv_mult > snd_mult) ?
+ (plen * (rcv_mult - snd_mult) + 1) >> 1 : 0;
+}
+
+static int ipath_verbs_send_dma(struct ipath_qp *qp,
+ struct ipath_ib_header *hdr, u32 hdrwords,
+ struct ipath_sge_state *ss, u32 len,
+ u32 plen, u32 dwords)
+{
+ struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ struct ipath_devdata *dd = dev->dd;
+ struct ipath_verbs_txreq *tx;
+ u32 *piobuf;
+ u32 control;
+ u32 ndesc;
+ int ret;
+
+ tx = qp->s_tx;
+ if (tx) {
+ qp->s_tx = NULL;
+ /* resend previously constructed packet */
+ ret = ipath_sdma_verbs_send(dd, tx->ss, tx->len, tx);
+ if (ret)
+ qp->s_tx = tx;
+ goto bail;
+ }
+
+ tx = get_txreq(dev);
+ if (!tx) {
+ ret = -EBUSY;
+ goto bail;
+ }
+
+ /*
+ * Get the saved delay count we computed for the previous packet
+ * and save the delay count for this packet to be used next time
+ * we get here.
+ */
+ control = qp->s_pkt_delay;
+ qp->s_pkt_delay = ipath_pkt_delay(plen, dd->delay_mult, qp->s_dmult);
+
+ tx->qp = qp;
+ atomic_inc(&qp->refcount);
+ tx->wqe = qp->s_wqe;
+ tx->txreq.callback = sdma_complete;
+ tx->txreq.callback_cookie = tx;
+ tx->txreq.flags = IPATH_SDMA_TXREQ_F_HEADTOHOST |
+ IPATH_SDMA_TXREQ_F_INTREQ | IPATH_SDMA_TXREQ_F_FREEDESC;
+ if (plen + 1 >= IPATH_SMALLBUF_DWORDS)
+ tx->txreq.flags |= IPATH_SDMA_TXREQ_F_USELARGEBUF;
+
+ /* VL15 packets bypass credit check */
+ if ((be16_to_cpu(hdr->lrh[0]) >> 12) == 15) {
+ control |= 1ULL << 31;
+ tx->txreq.flags |= IPATH_SDMA_TXREQ_F_VL15;
+ }
+
+ if (len) {
+ /*
+ * Don't try to DMA if it takes more descriptors than
+ * the queue holds.
+ */
+ ndesc = ipath_count_sge(ss, len);
+ if (ndesc >= dd->ipath_sdma_descq_cnt)
+ ndesc = 0;
+ } else
+ ndesc = 1;
+ if (ndesc) {
+ tx->hdr.pbc[0] = cpu_to_le32(plen);
+ tx->hdr.pbc[1] = cpu_to_le32(control);
+ memcpy(&tx->hdr.hdr, hdr, hdrwords << 2);
+ tx->txreq.sg_count = ndesc;
+ tx->map_len = (hdrwords + 2) << 2;
+ tx->txreq.map_addr = &tx->hdr;
+ ret = ipath_sdma_verbs_send(dd, ss, dwords, tx);
+ if (ret) {
+ /* save ss and length in dwords */
+ tx->ss = ss;
+ tx->len = dwords;
+ qp->s_tx = tx;
+ }
+ goto bail;
+ }
+
+ /* Allocate a buffer and copy the header and payload to it. */
+ tx->map_len = (plen + 1) << 2;
+ piobuf = kmalloc(tx->map_len, GFP_ATOMIC);
+ if (unlikely(piobuf == NULL)) {
+ ret = -EBUSY;
+ goto err_tx;
+ }
+ tx->txreq.map_addr = piobuf;
+ tx->txreq.flags |= IPATH_SDMA_TXREQ_F_FREEBUF;
+ tx->txreq.sg_count = 1;
+
+ *piobuf++ = (__force u32) cpu_to_le32(plen);
+ *piobuf++ = (__force u32) cpu_to_le32(control);
+ memcpy(piobuf, hdr, hdrwords << 2);
+ ipath_copy_from_sge(piobuf + hdrwords, ss, len);
+
+ ret = ipath_sdma_verbs_send(dd, NULL, 0, tx);
+ /*
+ * If we couldn't queue the DMA request, save the info
+ * and try again later rather than destroying the
+ * buffer and undoing the side effects of the copy.
+ */
+ if (ret) {
+ tx->ss = NULL;
+ tx->len = 0;
+ qp->s_tx = tx;
+ }
+ dev->n_unaligned++;
+ goto bail;
+
+err_tx:
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+ put_txreq(dev, tx);
+bail:
+ return ret;
+}
+
+static int ipath_verbs_send_pio(struct ipath_qp *qp,
+ struct ipath_ib_header *ibhdr, u32 hdrwords,
struct ipath_sge_state *ss, u32 len,
u32 plen, u32 dwords)
{
struct ipath_devdata *dd = to_idev(qp->ibqp.device)->dd;
+ u32 *hdr = (u32 *) ibhdr;
u32 __iomem *piobuf;
unsigned flush_wc;
+ u32 control;
int ret;
- piobuf = ipath_getpiobuf(dd, NULL);
+ piobuf = ipath_getpiobuf(dd, plen, NULL);
if (unlikely(piobuf == NULL)) {
ret = -EBUSY;
goto bail;
}
/*
- * Write len to control qword, no flags.
+ * Get the saved delay count we computed for the previous packet
+ * and save the delay count for this packet to be used next time
+ * we get here.
+ */
+ control = qp->s_pkt_delay;
+ qp->s_pkt_delay = ipath_pkt_delay(plen, dd->delay_mult, qp->s_dmult);
+
+ /* VL15 packets bypass credit check */
+ if ((be16_to_cpu(ibhdr->lrh[0]) >> 12) == 15)
+ control |= 1ULL << 31;
+
+ /*
+ * Write the length to the control qword plus any needed flags.
* We have to flush after the PBC for correctness on some cpus
* or WC buffer can be written out of order.
*/
- writeq(plen, piobuf);
+ writeq(((u64) control << 32) | plen, piobuf);
piobuf += 2;
flush_wc = dd->ipath_flags & IPATH_PIO_FLUSH_WC;
@@ -961,15 +1278,25 @@
*/
plen = hdrwords + dwords + 1;
- /* Drop non-VL15 packets if we are not in the active state */
- if (!(dd->ipath_flags & IPATH_LINKACTIVE) &&
- qp->ibqp.qp_type != IB_QPT_SMI) {
+ /*
+ * VL15 packets (IB_QPT_SMI) will always use PIO, so we
+ * can defer SDMA restart until link goes ACTIVE without
+ * worrying about just how we got there.
+ */
+ if (qp->ibqp.qp_type == IB_QPT_SMI)
+ ret = ipath_verbs_send_pio(qp, hdr, hdrwords, ss, len,
+ plen, dwords);
+ /* All non-VL15 packets are dropped if link is not ACTIVE */
+ else if (!(dd->ipath_flags & IPATH_LINKACTIVE)) {
if (qp->s_wqe)
ipath_send_complete(qp, qp->s_wqe, IB_WC_SUCCESS);
ret = 0;
- } else
- ret = ipath_verbs_send_pio(qp, (u32 *) hdr, hdrwords,
- ss, len, plen, dwords);
+ } else if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
+ ret = ipath_verbs_send_dma(qp, hdr, hdrwords, ss, len,
+ plen, dwords);
+ else
+ ret = ipath_verbs_send_pio(qp, hdr, hdrwords, ss, len,
+ plen, dwords);
return ret;
}
@@ -1038,6 +1365,12 @@
ipath_snap_cntr(dd, crp->cr_errlpcrccnt) +
ipath_snap_cntr(dd, crp->cr_badformatcnt) +
dd->ipath_rxfc_unsupvl_errs;
+ if (crp->cr_rxotherlocalphyerrcnt)
+ cntrs->port_rcv_errors +=
+ ipath_snap_cntr(dd, crp->cr_rxotherlocalphyerrcnt);
+ if (crp->cr_rxvlerrcnt)
+ cntrs->port_rcv_errors +=
+ ipath_snap_cntr(dd, crp->cr_rxvlerrcnt);
cntrs->port_rcv_remphys_errors =
ipath_snap_cntr(dd, crp->cr_rcvebpcnt);
cntrs->port_xmit_discards = ipath_snap_cntr(dd, crp->cr_unsupvlcnt);
@@ -1046,9 +1379,16 @@
cntrs->port_xmit_packets = ipath_snap_cntr(dd, crp->cr_pktsendcnt);
cntrs->port_rcv_packets = ipath_snap_cntr(dd, crp->cr_pktrcvcnt);
cntrs->local_link_integrity_errors =
- (dd->ipath_flags & IPATH_GPIO_ERRINTRS) ?
- dd->ipath_lli_errs : dd->ipath_lli_errors;
- cntrs->excessive_buffer_overrun_errors = dd->ipath_overrun_thresh_errs;
+ crp->cr_locallinkintegrityerrcnt ?
+ ipath_snap_cntr(dd, crp->cr_locallinkintegrityerrcnt) :
+ ((dd->ipath_flags & IPATH_GPIO_ERRINTRS) ?
+ dd->ipath_lli_errs : dd->ipath_lli_errors);
+ cntrs->excessive_buffer_overrun_errors =
+ crp->cr_excessbufferovflcnt ?
+ ipath_snap_cntr(dd, crp->cr_excessbufferovflcnt) :
+ dd->ipath_overrun_thresh_errs;
+ cntrs->vl15_dropped = crp->cr_vl15droppedpktcnt ?
+ ipath_snap_cntr(dd, crp->cr_vl15droppedpktcnt) : 0;
ret = 0;
@@ -1183,7 +1523,9 @@
props->sm_lid = dev->sm_lid;
props->sm_sl = dev->sm_sl;
ibcstat = dd->ipath_lastibcstat;
- props->state = ((ibcstat >> 4) & 0x3) + 1;
+ /* map LinkState to IB portinfo values. */
+ props->state = ipath_ib_linkstate(dd, ibcstat) + 1;
+
/* See phys_state_show() */
props->phys_state = /* MEA: assumes shift == 0 */
ipath_cvt_physportstate[dd->ipath_lastibcstat &
@@ -1195,18 +1537,13 @@
props->bad_pkey_cntr = ipath_get_cr_errpkey(dd) -
dev->z_pkey_violations;
props->qkey_viol_cntr = dev->qkey_violations;
- props->active_width = IB_WIDTH_4X;
+ props->active_width = dd->ipath_link_width_active;
/* See rate_show() */
- props->active_speed = 1; /* Regular 10Mbs speed. */
+ props->active_speed = dd->ipath_link_speed_active;
props->max_vl_num = 1; /* VLCap = VL0 */
props->init_type_reply = 0;
- /*
- * Note: the chip supports a maximum MTU of 4096, but the driver
- * hasn't implemented this feature yet, so set the maximum value
- * to 2048.
- */
- props->max_mtu = IB_MTU_2048;
+ props->max_mtu = ipath_mtu4096 ? IB_MTU_4096 : IB_MTU_2048;
switch (dd->ipath_ibmtu) {
case 4096:
mtu = IB_MTU_4096;
@@ -1399,6 +1736,7 @@
/* ib_create_ah() will initialize ah->ibah. */
ah->attr = *ah_attr;
+ ah->attr.static_rate = ipath_ib_rate_to_mult(ah_attr->static_rate);
ret = &ah->ibah;
@@ -1432,6 +1770,7 @@
struct ipath_ah *ah = to_iah(ibah);
*ah_attr = ah->attr;
+ ah_attr->static_rate = ipath_mult_to_ib_rate(ah->attr.static_rate);
return 0;
}
@@ -1581,6 +1920,8 @@
struct ipath_verbs_counters cntrs;
struct ipath_ibdev *idev;
struct ib_device *dev;
+ struct ipath_verbs_txreq *tx;
+ unsigned i;
int ret;
idev = (struct ipath_ibdev *)ib_alloc_device(sizeof *idev);
@@ -1591,6 +1932,17 @@
dev = &idev->ibdev;
+ if (dd->ipath_sdma_descq_cnt) {
+ tx = kmalloc(dd->ipath_sdma_descq_cnt * sizeof *tx,
+ GFP_KERNEL);
+ if (tx == NULL) {
+ ret = -ENOMEM;
+ goto err_tx;
+ }
+ } else
+ tx = NULL;
+ idev->txreq_bufs = tx;
+
/* Only need to initialize non-zero fields. */
spin_lock_init(&idev->n_pds_lock);
spin_lock_init(&idev->n_ahs_lock);
@@ -1631,15 +1983,17 @@
INIT_LIST_HEAD(&idev->pending[2]);
INIT_LIST_HEAD(&idev->piowait);
INIT_LIST_HEAD(&idev->rnrwait);
+ INIT_LIST_HEAD(&idev->txreq_free);
idev->pending_index = 0;
idev->port_cap_flags =
IB_PORT_SYS_IMAGE_GUID_SUP | IB_PORT_CLIENT_REG_SUP;
+ if (dd->ipath_flags & IPATH_HAS_LINK_LATENCY)
+ idev->port_cap_flags |= IB_PORT_LINK_LATENCY_SUP;
idev->pma_counter_select[0] = IB_PMA_PORT_XMIT_DATA;
idev->pma_counter_select[1] = IB_PMA_PORT_RCV_DATA;
idev->pma_counter_select[2] = IB_PMA_PORT_XMIT_PKTS;
idev->pma_counter_select[3] = IB_PMA_PORT_RCV_PKTS;
idev->pma_counter_select[4] = IB_PMA_PORT_XMIT_WAIT;
- idev->link_width_enabled = 3; /* 1x or 4x */
/* Snapshot current HW counters to "clear" them. */
ipath_get_counters(dd, &cntrs);
@@ -1661,6 +2015,9 @@
cntrs.excessive_buffer_overrun_errors;
idev->z_vl15_dropped = cntrs.vl15_dropped;
+ for (i = 0; i < dd->ipath_sdma_descq_cnt; i++, tx++)
+ list_add(&tx->txreq.list, &idev->txreq_free);
+
/*
* The system image GUID is supposed to be the same for all
* IB HCAs in a single system but since there can be other
@@ -1710,6 +2067,7 @@
dev->phys_port_cnt = 1;
dev->num_comp_vectors = 1;
dev->dma_device = &dd->pcidev->dev;
+ dev->class_dev.dev = dev->dma_device;
dev->query_device = ipath_query_device;
dev->modify_device = ipath_modify_device;
dev->query_port = ipath_query_port;
@@ -1774,6 +2132,8 @@
err_lk:
kfree(idev->qp_table.table);
err_qp:
+ kfree(idev->txreq_bufs);
+err_tx:
ib_dealloc_device(dev);
ipath_dev_err(dd, "cannot register verbs: %d!\n", -ret);
idev = NULL;
@@ -1808,6 +2168,7 @@
ipath_free_all_qps(&dev->qp_table);
kfree(dev->qp_table.table);
kfree(dev->lk_table.table);
+ kfree(dev->txreq_bufs);
ib_dealloc_device(ibdev);
}
@@ -1855,13 +2216,15 @@
"RC stalls %d\n"
"piobuf wait %d\n"
"no piobuf %d\n"
+ "unaligned %d\n"
"PKT drops %d\n"
"WQE errs %d\n",
dev->n_rc_resends, dev->n_rc_qacks, dev->n_rc_acks,
dev->n_seq_naks, dev->n_rdma_seq, dev->n_rnr_naks,
dev->n_other_naks, dev->n_timeouts,
dev->n_rdma_dup_busy, dev->n_rc_stalls, dev->n_piowait,
- dev->n_no_piobuf, dev->n_pkt_drops, dev->n_wqe_errs);
+ dev->n_no_piobuf, dev->n_unaligned,
+ dev->n_pkt_drops, dev->n_wqe_errs);
for (i = 0; i < ARRAY_SIZE(dev->opstats); i++) {
const struct ipath_opcode_stats *si = &dev->opstats[i];
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.h b/drivers/infiniband/hw/ipath/ipath_verbs.h
index 3d59736..6514aa8 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.h
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -138,6 +138,11 @@
} u;
} __attribute__ ((packed));
+struct ipath_pio_header {
+ __le32 pbc[2];
+ struct ipath_ib_header hdr;
+} __attribute__ ((packed));
+
/*
* There is one struct ipath_mcast for each multicast GID.
* All attached QPs are then stored as a list of
@@ -319,6 +324,7 @@
struct ipath_sge *sg_list; /* next SGE to be used if any */
struct ipath_sge sge; /* progress state for the current SGE */
u8 num_sge;
+ u8 static_rate;
};
/*
@@ -356,6 +362,7 @@
struct tasklet_struct s_task;
struct ipath_mmap_info *ip;
struct ipath_sge_state *s_cur_sge;
+ struct ipath_verbs_txreq *s_tx;
struct ipath_sge_state s_sge; /* current send request data */
struct ipath_ack_entry s_ack_queue[IPATH_MAX_RDMA_ATOMIC + 1];
struct ipath_sge_state s_ack_rdma_sge;
@@ -363,7 +370,8 @@
struct ipath_sge_state r_sge; /* current receive data */
spinlock_t s_lock;
unsigned long s_busy;
- u32 s_hdrwords; /* size of s_hdr in 32 bit words */
+ u16 s_pkt_delay;
+ u16 s_hdrwords; /* size of s_hdr in 32 bit words */
u32 s_cur_size; /* size of send packet in bytes */
u32 s_len; /* total length of s_sge */
u32 s_rdma_read_len; /* total length of s_rdma_read_sge */
@@ -387,7 +395,6 @@
u8 r_nak_state; /* non-zero if NAK is pending */
u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */
u8 r_reuse_sge; /* for UC receive errors */
- u8 r_sge_inx; /* current index into sg_list */
u8 r_wrid_valid; /* r_wrid set but CQ entry not yet made */
u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */
u8 r_head_ack_queue; /* index into s_ack_queue[] */
@@ -403,6 +410,7 @@
u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */
u8 s_tail_ack_queue; /* index into s_ack_queue[] */
u8 s_flags;
+ u8 s_dmult;
u8 timeout; /* Timeout for this QP */
enum ib_mtu path_mtu;
u32 remote_qpn;
@@ -510,6 +518,8 @@
struct ipath_lkey_table lk_table;
struct list_head pending[3]; /* FIFO of QPs waiting for ACKs */
struct list_head piowait; /* list for wait PIO buf */
+ struct list_head txreq_free;
+ void *txreq_bufs;
/* list of QPs waiting for RNR timer */
struct list_head rnrwait;
spinlock_t pending_lock;
@@ -570,6 +580,7 @@
u32 n_rdma_dup_busy;
u32 n_piowait;
u32 n_no_piobuf;
+ u32 n_unaligned;
u32 port_cap_flags;
u32 pma_sample_start;
u32 pma_sample_interval;
@@ -581,7 +592,6 @@
u16 pending_index; /* which pending queue is active */
u8 pma_sample_status;
u8 subnet_timeout;
- u8 link_width_enabled;
u8 vl_high_limit;
struct ipath_opcode_stats opstats[128];
};
@@ -602,6 +612,16 @@
u32 vl15_dropped;
};
+struct ipath_verbs_txreq {
+ struct ipath_qp *qp;
+ struct ipath_swqe *wqe;
+ u32 map_len;
+ u32 len;
+ struct ipath_sge_state *ss;
+ struct ipath_pio_header hdr;
+ struct ipath_sdma_txreq txreq;
+};
+
static inline struct ipath_mr *to_imr(struct ib_mr *ibmr)
{
return container_of(ibmr, struct ipath_mr, ibmr);
@@ -694,11 +714,11 @@
void ipath_get_credit(struct ipath_qp *qp, u32 aeth);
+unsigned ipath_ib_rate_to_mult(enum ib_rate rate);
+
int ipath_verbs_send(struct ipath_qp *qp, struct ipath_ib_header *hdr,
u32 hdrwords, struct ipath_sge_state *ss, u32 len);
-void ipath_cq_enter(struct ipath_cq *cq, struct ib_wc *entry, int sig);
-
void ipath_copy_sge(struct ipath_sge_state *ss, void *data, u32 length);
void ipath_skip_sge(struct ipath_sge_state *ss, u32 length);
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index 7360bba..3557e7e 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -85,6 +85,82 @@
return get_sw_cqe(cq, cq->mcq.cons_index);
}
+int mlx4_ib_modify_cq(struct ib_cq *cq, u16 cq_count, u16 cq_period)
+{
+ struct mlx4_ib_cq *mcq = to_mcq(cq);
+ struct mlx4_ib_dev *dev = to_mdev(cq->device);
+
+ return mlx4_cq_modify(dev->dev, &mcq->mcq, cq_count, cq_period);
+}
+
+static int mlx4_ib_alloc_cq_buf(struct mlx4_ib_dev *dev, struct mlx4_ib_cq_buf *buf, int nent)
+{
+ int err;
+
+ err = mlx4_buf_alloc(dev->dev, nent * sizeof(struct mlx4_cqe),
+ PAGE_SIZE * 2, &buf->buf);
+
+ if (err)
+ goto out;
+
+ err = mlx4_mtt_init(dev->dev, buf->buf.npages, buf->buf.page_shift,
+ &buf->mtt);
+ if (err)
+ goto err_buf;
+
+ err = mlx4_buf_write_mtt(dev->dev, &buf->mtt, &buf->buf);
+ if (err)
+ goto err_mtt;
+
+ return 0;
+
+err_mtt:
+ mlx4_mtt_cleanup(dev->dev, &buf->mtt);
+
+err_buf:
+ mlx4_buf_free(dev->dev, nent * sizeof(struct mlx4_cqe),
+ &buf->buf);
+
+out:
+ return err;
+}
+
+static void mlx4_ib_free_cq_buf(struct mlx4_ib_dev *dev, struct mlx4_ib_cq_buf *buf, int cqe)
+{
+ mlx4_buf_free(dev->dev, (cqe + 1) * sizeof(struct mlx4_cqe), &buf->buf);
+}
+
+static int mlx4_ib_get_cq_umem(struct mlx4_ib_dev *dev, struct ib_ucontext *context,
+ struct mlx4_ib_cq_buf *buf, struct ib_umem **umem,
+ u64 buf_addr, int cqe)
+{
+ int err;
+
+ *umem = ib_umem_get(context, buf_addr, cqe * sizeof (struct mlx4_cqe),
+ IB_ACCESS_LOCAL_WRITE);
+ if (IS_ERR(*umem))
+ return PTR_ERR(*umem);
+
+ err = mlx4_mtt_init(dev->dev, ib_umem_page_count(*umem),
+ ilog2((*umem)->page_size), &buf->mtt);
+ if (err)
+ goto err_buf;
+
+ err = mlx4_ib_umem_write_mtt(dev, &buf->mtt, *umem);
+ if (err)
+ goto err_mtt;
+
+ return 0;
+
+err_mtt:
+ mlx4_mtt_cleanup(dev->dev, &buf->mtt);
+
+err_buf:
+ ib_umem_release(*umem);
+
+ return err;
+}
+
struct ib_cq *mlx4_ib_create_cq(struct ib_device *ibdev, int entries, int vector,
struct ib_ucontext *context,
struct ib_udata *udata)
@@ -92,7 +168,6 @@
struct mlx4_ib_dev *dev = to_mdev(ibdev);
struct mlx4_ib_cq *cq;
struct mlx4_uar *uar;
- int buf_size;
int err;
if (entries < 1 || entries > dev->dev->caps.max_cqes)
@@ -104,8 +179,10 @@
entries = roundup_pow_of_two(entries + 1);
cq->ibcq.cqe = entries - 1;
- buf_size = entries * sizeof (struct mlx4_cqe);
+ mutex_init(&cq->resize_mutex);
spin_lock_init(&cq->lock);
+ cq->resize_buf = NULL;
+ cq->resize_umem = NULL;
if (context) {
struct mlx4_ib_create_cq ucmd;
@@ -115,21 +192,10 @@
goto err_cq;
}
- cq->umem = ib_umem_get(context, ucmd.buf_addr, buf_size,
- IB_ACCESS_LOCAL_WRITE);
- if (IS_ERR(cq->umem)) {
- err = PTR_ERR(cq->umem);
+ err = mlx4_ib_get_cq_umem(dev, context, &cq->buf, &cq->umem,
+ ucmd.buf_addr, entries);
+ if (err)
goto err_cq;
- }
-
- err = mlx4_mtt_init(dev->dev, ib_umem_page_count(cq->umem),
- ilog2(cq->umem->page_size), &cq->buf.mtt);
- if (err)
- goto err_buf;
-
- err = mlx4_ib_umem_write_mtt(dev, &cq->buf.mtt, cq->umem);
- if (err)
- goto err_mtt;
err = mlx4_ib_db_map_user(to_mucontext(context), ucmd.db_addr,
&cq->db);
@@ -147,19 +213,9 @@
*cq->mcq.set_ci_db = 0;
*cq->mcq.arm_db = 0;
- if (mlx4_buf_alloc(dev->dev, buf_size, PAGE_SIZE * 2, &cq->buf.buf)) {
- err = -ENOMEM;
+ err = mlx4_ib_alloc_cq_buf(dev, &cq->buf, entries);
+ if (err)
goto err_db;
- }
-
- err = mlx4_mtt_init(dev->dev, cq->buf.buf.npages, cq->buf.buf.page_shift,
- &cq->buf.mtt);
- if (err)
- goto err_buf;
-
- err = mlx4_buf_write_mtt(dev->dev, &cq->buf.mtt, &cq->buf.buf);
- if (err)
- goto err_mtt;
uar = &dev->priv_uar;
}
@@ -187,12 +243,10 @@
err_mtt:
mlx4_mtt_cleanup(dev->dev, &cq->buf.mtt);
-err_buf:
if (context)
ib_umem_release(cq->umem);
else
- mlx4_buf_free(dev->dev, entries * sizeof (struct mlx4_cqe),
- &cq->buf.buf);
+ mlx4_ib_free_cq_buf(dev, &cq->buf, entries);
err_db:
if (!context)
@@ -204,6 +258,170 @@
return ERR_PTR(err);
}
+static int mlx4_alloc_resize_buf(struct mlx4_ib_dev *dev, struct mlx4_ib_cq *cq,
+ int entries)
+{
+ int err;
+
+ if (cq->resize_buf)
+ return -EBUSY;
+
+ cq->resize_buf = kmalloc(sizeof *cq->resize_buf, GFP_ATOMIC);
+ if (!cq->resize_buf)
+ return -ENOMEM;
+
+ err = mlx4_ib_alloc_cq_buf(dev, &cq->resize_buf->buf, entries);
+ if (err) {
+ kfree(cq->resize_buf);
+ cq->resize_buf = NULL;
+ return err;
+ }
+
+ cq->resize_buf->cqe = entries - 1;
+
+ return 0;
+}
+
+static int mlx4_alloc_resize_umem(struct mlx4_ib_dev *dev, struct mlx4_ib_cq *cq,
+ int entries, struct ib_udata *udata)
+{
+ struct mlx4_ib_resize_cq ucmd;
+ int err;
+
+ if (cq->resize_umem)
+ return -EBUSY;
+
+ if (ib_copy_from_udata(&ucmd, udata, sizeof ucmd))
+ return -EFAULT;
+
+ cq->resize_buf = kmalloc(sizeof *cq->resize_buf, GFP_ATOMIC);
+ if (!cq->resize_buf)
+ return -ENOMEM;
+
+ err = mlx4_ib_get_cq_umem(dev, cq->umem->context, &cq->resize_buf->buf,
+ &cq->resize_umem, ucmd.buf_addr, entries);
+ if (err) {
+ kfree(cq->resize_buf);
+ cq->resize_buf = NULL;
+ return err;
+ }
+
+ cq->resize_buf->cqe = entries - 1;
+
+ return 0;
+}
+
+static int mlx4_ib_get_outstanding_cqes(struct mlx4_ib_cq *cq)
+{
+ u32 i;
+
+ i = cq->mcq.cons_index;
+ while (get_sw_cqe(cq, i & cq->ibcq.cqe))
+ ++i;
+
+ return i - cq->mcq.cons_index;
+}
+
+static void mlx4_ib_cq_resize_copy_cqes(struct mlx4_ib_cq *cq)
+{
+ struct mlx4_cqe *cqe;
+ int i;
+
+ i = cq->mcq.cons_index;
+ cqe = get_cqe(cq, i & cq->ibcq.cqe);
+ while ((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) != MLX4_CQE_OPCODE_RESIZE) {
+ memcpy(get_cqe_from_buf(&cq->resize_buf->buf,
+ (i + 1) & cq->resize_buf->cqe),
+ get_cqe(cq, i & cq->ibcq.cqe), sizeof(struct mlx4_cqe));
+ cqe = get_cqe(cq, ++i & cq->ibcq.cqe);
+ }
+ ++cq->mcq.cons_index;
+}
+
+int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
+{
+ struct mlx4_ib_dev *dev = to_mdev(ibcq->device);
+ struct mlx4_ib_cq *cq = to_mcq(ibcq);
+ int outst_cqe;
+ int err;
+
+ mutex_lock(&cq->resize_mutex);
+
+ if (entries < 1 || entries > dev->dev->caps.max_cqes) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ entries = roundup_pow_of_two(entries + 1);
+ if (entries == ibcq->cqe + 1) {
+ err = 0;
+ goto out;
+ }
+
+ if (ibcq->uobject) {
+ err = mlx4_alloc_resize_umem(dev, cq, entries, udata);
+ if (err)
+ goto out;
+ } else {
+ /* Can't be smaller then the number of outstanding CQEs */
+ outst_cqe = mlx4_ib_get_outstanding_cqes(cq);
+ if (entries < outst_cqe + 1) {
+ err = 0;
+ goto out;
+ }
+
+ err = mlx4_alloc_resize_buf(dev, cq, entries);
+ if (err)
+ goto out;
+ }
+
+ err = mlx4_cq_resize(dev->dev, &cq->mcq, entries, &cq->resize_buf->buf.mtt);
+ if (err)
+ goto err_buf;
+
+ if (ibcq->uobject) {
+ cq->buf = cq->resize_buf->buf;
+ cq->ibcq.cqe = cq->resize_buf->cqe;
+ ib_umem_release(cq->umem);
+ cq->umem = cq->resize_umem;
+
+ kfree(cq->resize_buf);
+ cq->resize_buf = NULL;
+ cq->resize_umem = NULL;
+ } else {
+ spin_lock_irq(&cq->lock);
+ if (cq->resize_buf) {
+ mlx4_ib_cq_resize_copy_cqes(cq);
+ mlx4_ib_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
+ cq->buf = cq->resize_buf->buf;
+ cq->ibcq.cqe = cq->resize_buf->cqe;
+
+ kfree(cq->resize_buf);
+ cq->resize_buf = NULL;
+ }
+ spin_unlock_irq(&cq->lock);
+ }
+
+ goto out;
+
+err_buf:
+ if (!ibcq->uobject)
+ mlx4_ib_free_cq_buf(dev, &cq->resize_buf->buf,
+ cq->resize_buf->cqe);
+
+ kfree(cq->resize_buf);
+ cq->resize_buf = NULL;
+
+ if (cq->resize_umem) {
+ ib_umem_release(cq->resize_umem);
+ cq->resize_umem = NULL;
+ }
+
+out:
+ mutex_unlock(&cq->resize_mutex);
+ return err;
+}
+
int mlx4_ib_destroy_cq(struct ib_cq *cq)
{
struct mlx4_ib_dev *dev = to_mdev(cq->device);
@@ -216,8 +434,7 @@
mlx4_ib_db_unmap_user(to_mucontext(cq->uobject->context), &mcq->db);
ib_umem_release(mcq->umem);
} else {
- mlx4_buf_free(dev->dev, (cq->cqe + 1) * sizeof (struct mlx4_cqe),
- &mcq->buf.buf);
+ mlx4_ib_free_cq_buf(dev, &mcq->buf, cq->cqe + 1);
mlx4_ib_db_free(dev, &mcq->db);
}
@@ -297,6 +514,20 @@
wc->vendor_err = cqe->vendor_err_syndrome;
}
+static int mlx4_ib_ipoib_csum_ok(__be32 status, __be16 checksum)
+{
+ return ((status & cpu_to_be32(MLX4_CQE_IPOIB_STATUS_IPV4 |
+ MLX4_CQE_IPOIB_STATUS_IPV4F |
+ MLX4_CQE_IPOIB_STATUS_IPV4OPT |
+ MLX4_CQE_IPOIB_STATUS_IPV6 |
+ MLX4_CQE_IPOIB_STATUS_IPOK)) ==
+ cpu_to_be32(MLX4_CQE_IPOIB_STATUS_IPV4 |
+ MLX4_CQE_IPOIB_STATUS_IPOK)) &&
+ (status & cpu_to_be32(MLX4_CQE_IPOIB_STATUS_UDP |
+ MLX4_CQE_IPOIB_STATUS_TCP)) &&
+ checksum == cpu_to_be16(0xffff);
+}
+
static int mlx4_ib_poll_one(struct mlx4_ib_cq *cq,
struct mlx4_ib_qp **cur_qp,
struct ib_wc *wc)
@@ -310,6 +541,7 @@
u32 g_mlpath_rqpn;
u16 wqe_ctr;
+repoll:
cqe = next_cqe_sw(cq);
if (!cqe)
return -EAGAIN;
@@ -332,6 +564,22 @@
return -EINVAL;
}
+ /* Resize CQ in progress */
+ if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == MLX4_CQE_OPCODE_RESIZE)) {
+ if (cq->resize_buf) {
+ struct mlx4_ib_dev *dev = to_mdev(cq->ibcq.device);
+
+ mlx4_ib_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
+ cq->buf = cq->resize_buf->buf;
+ cq->ibcq.cqe = cq->resize_buf->cqe;
+
+ kfree(cq->resize_buf);
+ cq->resize_buf = NULL;
+ }
+
+ goto repoll;
+ }
+
if (!*cur_qp ||
(be32_to_cpu(cqe->my_qpn) & 0xffffff) != (*cur_qp)->mqp.qpn) {
/*
@@ -406,6 +654,9 @@
case MLX4_OPCODE_BIND_MW:
wc->opcode = IB_WC_BIND_MW;
break;
+ case MLX4_OPCODE_LSO:
+ wc->opcode = IB_WC_LSO;
+ break;
}
} else {
wc->byte_len = be32_to_cpu(cqe->byte_cnt);
@@ -434,6 +685,8 @@
wc->dlid_path_bits = (g_mlpath_rqpn >> 24) & 0x7f;
wc->wc_flags |= g_mlpath_rqpn & 0x80000000 ? IB_WC_GRH : 0;
wc->pkey_index = be32_to_cpu(cqe->immed_rss_invalid) & 0x7f;
+ wc->csum_ok = mlx4_ib_ipoib_csum_ok(cqe->ipoib_status,
+ cqe->checksum);
}
return 0;
diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c
index 0ed02b7..4c1e72f 100644
--- a/drivers/infiniband/hw/mlx4/mad.c
+++ b/drivers/infiniband/hw/mlx4/mad.c
@@ -165,7 +165,7 @@
event.device = ibdev;
event.element.port_num = port_num;
- if(pinfo->clientrereg_resv_subnetto & 0x80)
+ if (pinfo->clientrereg_resv_subnetto & 0x80)
event.event = IB_EVENT_CLIENT_REREGISTER;
else
event.event = IB_EVENT_LID_CHANGE;
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 96a39b5..136c76c 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -44,8 +44,8 @@
#include "user.h"
#define DRV_NAME "mlx4_ib"
-#define DRV_VERSION "0.01"
-#define DRV_RELDATE "May 1, 2006"
+#define DRV_VERSION "1.0"
+#define DRV_RELDATE "April 4, 2008"
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("Mellanox ConnectX HCA InfiniBand driver");
@@ -99,6 +99,10 @@
props->device_cap_flags |= IB_DEVICE_AUTO_PATH_MIG;
if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_UD_AV_PORT)
props->device_cap_flags |= IB_DEVICE_UD_AV_PORT_ENFORCE;
+ if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_IPOIB_CSUM)
+ props->device_cap_flags |= IB_DEVICE_UD_IP_CSUM;
+ if (dev->dev->caps.max_gso_sz)
+ props->device_cap_flags |= IB_DEVICE_UD_TSO;
props->vendor_id = be32_to_cpup((__be32 *) (out_mad->data + 36)) &
0xffffff;
@@ -567,6 +571,7 @@
(1ull << IB_USER_VERBS_CMD_DEREG_MR) |
(1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) |
(1ull << IB_USER_VERBS_CMD_CREATE_CQ) |
+ (1ull << IB_USER_VERBS_CMD_RESIZE_CQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_CQ) |
(1ull << IB_USER_VERBS_CMD_CREATE_QP) |
(1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
@@ -605,6 +610,8 @@
ibdev->ib_dev.post_send = mlx4_ib_post_send;
ibdev->ib_dev.post_recv = mlx4_ib_post_recv;
ibdev->ib_dev.create_cq = mlx4_ib_create_cq;
+ ibdev->ib_dev.modify_cq = mlx4_ib_modify_cq;
+ ibdev->ib_dev.resize_cq = mlx4_ib_resize_cq;
ibdev->ib_dev.destroy_cq = mlx4_ib_destroy_cq;
ibdev->ib_dev.poll_cq = mlx4_ib_poll_cq;
ibdev->ib_dev.req_notify_cq = mlx4_ib_arm_cq;
@@ -675,18 +682,20 @@
}
static void mlx4_ib_event(struct mlx4_dev *dev, void *ibdev_ptr,
- enum mlx4_dev_event event, int subtype,
- int port)
+ enum mlx4_dev_event event, int port)
{
struct ib_event ibev;
switch (event) {
- case MLX4_EVENT_TYPE_PORT_CHANGE:
- ibev.event = subtype == MLX4_PORT_CHANGE_SUBTYPE_ACTIVE ?
- IB_EVENT_PORT_ACTIVE : IB_EVENT_PORT_ERR;
+ case MLX4_DEV_EVENT_PORT_UP:
+ ibev.event = IB_EVENT_PORT_ACTIVE;
break;
- case MLX4_EVENT_TYPE_LOCAL_CATAS_ERROR:
+ case MLX4_DEV_EVENT_PORT_DOWN:
+ ibev.event = IB_EVENT_PORT_ERR;
+ break;
+
+ case MLX4_DEV_EVENT_CATASTROPHIC_ERROR:
ibev.event = IB_EVENT_DEVICE_FATAL;
break;
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index 3726e45..9e63732 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -78,13 +78,21 @@
struct mlx4_mtt mtt;
};
+struct mlx4_ib_cq_resize {
+ struct mlx4_ib_cq_buf buf;
+ int cqe;
+};
+
struct mlx4_ib_cq {
struct ib_cq ibcq;
struct mlx4_cq mcq;
struct mlx4_ib_cq_buf buf;
+ struct mlx4_ib_cq_resize *resize_buf;
struct mlx4_ib_db db;
spinlock_t lock;
+ struct mutex resize_mutex;
struct ib_umem *umem;
+ struct ib_umem *resize_umem;
};
struct mlx4_ib_mr {
@@ -110,6 +118,10 @@
unsigned tail;
};
+enum mlx4_ib_qp_flags {
+ MLX4_IB_QP_LSO = 1 << 0
+};
+
struct mlx4_ib_qp {
struct ib_qp ibqp;
struct mlx4_qp mqp;
@@ -129,6 +141,7 @@
struct mlx4_mtt mtt;
int buf_size;
struct mutex mutex;
+ u32 flags;
u8 port;
u8 alt_port;
u8 atomic_rd_en;
@@ -249,6 +262,8 @@
struct ib_udata *udata);
int mlx4_ib_dereg_mr(struct ib_mr *mr);
+int mlx4_ib_modify_cq(struct ib_cq *cq, u16 cq_count, u16 cq_period);
+int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata);
struct ib_cq *mlx4_ib_create_cq(struct ib_device *ibdev, int entries, int vector,
struct ib_ucontext *context,
struct ib_udata *udata);
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 958e205..b75efae7 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -71,6 +71,7 @@
static const __be32 mlx4_ib_opcode[] = {
[IB_WR_SEND] = __constant_cpu_to_be32(MLX4_OPCODE_SEND),
+ [IB_WR_LSO] = __constant_cpu_to_be32(MLX4_OPCODE_LSO),
[IB_WR_SEND_WITH_IMM] = __constant_cpu_to_be32(MLX4_OPCODE_SEND_IMM),
[IB_WR_RDMA_WRITE] = __constant_cpu_to_be32(MLX4_OPCODE_RDMA_WRITE),
[IB_WR_RDMA_WRITE_WITH_IMM] = __constant_cpu_to_be32(MLX4_OPCODE_RDMA_WRITE_IMM),
@@ -122,7 +123,7 @@
*/
static void stamp_send_wqe(struct mlx4_ib_qp *qp, int n, int size)
{
- u32 *wqe;
+ __be32 *wqe;
int i;
int s;
int ind;
@@ -143,7 +144,7 @@
buf = get_send_wqe(qp, n & (qp->sq.wqe_cnt - 1));
for (i = 64; i < s; i += 64) {
wqe = buf + i;
- *wqe = 0xffffffff;
+ *wqe = cpu_to_be32(0xffffffff);
}
}
}
@@ -242,7 +243,7 @@
}
}
-static int send_wqe_overhead(enum ib_qp_type type)
+static int send_wqe_overhead(enum ib_qp_type type, u32 flags)
{
/*
* UD WQEs must have a datagram segment.
@@ -253,7 +254,8 @@
switch (type) {
case IB_QPT_UD:
return sizeof (struct mlx4_wqe_ctrl_seg) +
- sizeof (struct mlx4_wqe_datagram_seg);
+ sizeof (struct mlx4_wqe_datagram_seg) +
+ ((flags & MLX4_IB_QP_LSO) ? 64 : 0);
case IB_QPT_UC:
return sizeof (struct mlx4_wqe_ctrl_seg) +
sizeof (struct mlx4_wqe_raddr_seg);
@@ -315,7 +317,7 @@
/* Sanity check SQ size before proceeding */
if (cap->max_send_wr > dev->dev->caps.max_wqes ||
cap->max_send_sge > dev->dev->caps.max_sq_sg ||
- cap->max_inline_data + send_wqe_overhead(type) +
+ cap->max_inline_data + send_wqe_overhead(type, qp->flags) +
sizeof (struct mlx4_wqe_inline_seg) > dev->dev->caps.max_sq_desc_sz)
return -EINVAL;
@@ -329,7 +331,7 @@
s = max(cap->max_send_sge * sizeof (struct mlx4_wqe_data_seg),
cap->max_inline_data + sizeof (struct mlx4_wqe_inline_seg)) +
- send_wqe_overhead(type);
+ send_wqe_overhead(type, qp->flags);
/*
* Hermon supports shrinking WQEs, such that a single work
@@ -394,7 +396,8 @@
}
qp->sq.max_gs = ((qp->sq_max_wqes_per_wr << qp->sq.wqe_shift) -
- send_wqe_overhead(type)) / sizeof (struct mlx4_wqe_data_seg);
+ send_wqe_overhead(type, qp->flags)) /
+ sizeof (struct mlx4_wqe_data_seg);
qp->buf_size = (qp->rq.wqe_cnt << qp->rq.wqe_shift) +
(qp->sq.wqe_cnt << qp->sq.wqe_shift);
@@ -503,6 +506,9 @@
} else {
qp->sq_no_prefetch = 0;
+ if (init_attr->create_flags & IB_QP_CREATE_IPOIB_UD_LSO)
+ qp->flags |= MLX4_IB_QP_LSO;
+
err = set_kernel_sq_size(dev, &init_attr->cap, init_attr->qp_type, qp);
if (err)
goto err;
@@ -673,6 +679,13 @@
struct mlx4_ib_qp *qp;
int err;
+ /* We only support LSO, and only for kernel UD QPs. */
+ if (init_attr->create_flags & ~IB_QP_CREATE_IPOIB_UD_LSO)
+ return ERR_PTR(-EINVAL);
+ if (init_attr->create_flags & IB_QP_CREATE_IPOIB_UD_LSO &&
+ (pd->uobject || init_attr->qp_type != IB_QPT_UD))
+ return ERR_PTR(-EINVAL);
+
switch (init_attr->qp_type) {
case IB_QPT_RC:
case IB_QPT_UC:
@@ -876,10 +889,15 @@
}
}
- if (ibqp->qp_type == IB_QPT_GSI || ibqp->qp_type == IB_QPT_SMI ||
- ibqp->qp_type == IB_QPT_UD)
+ if (ibqp->qp_type == IB_QPT_GSI || ibqp->qp_type == IB_QPT_SMI)
context->mtu_msgmax = (IB_MTU_4096 << 5) | 11;
- else if (attr_mask & IB_QP_PATH_MTU) {
+ else if (ibqp->qp_type == IB_QPT_UD) {
+ if (qp->flags & MLX4_IB_QP_LSO)
+ context->mtu_msgmax = (IB_MTU_4096 << 5) |
+ ilog2(dev->dev->caps.max_gso_sz);
+ else
+ context->mtu_msgmax = (IB_MTU_4096 << 5) | 11;
+ } else if (attr_mask & IB_QP_PATH_MTU) {
if (attr->path_mtu < IB_MTU_256 || attr->path_mtu > IB_MTU_4096) {
printk(KERN_ERR "path MTU (%u) is invalid\n",
attr->path_mtu);
@@ -1182,7 +1200,7 @@
}
static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr,
- void *wqe)
+ void *wqe, unsigned *mlx_seg_len)
{
struct ib_device *ib_dev = &to_mdev(sqp->qp.ibqp.device)->ib_dev;
struct mlx4_wqe_mlx_seg *mlx = wqe;
@@ -1231,7 +1249,7 @@
case IB_WR_SEND_WITH_IMM:
sqp->ud_header.bth.opcode = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE;
sqp->ud_header.immediate_present = 1;
- sqp->ud_header.immediate_data = wr->imm_data;
+ sqp->ud_header.immediate_data = wr->ex.imm_data;
break;
default:
return -EINVAL;
@@ -1303,7 +1321,9 @@
i = 2;
}
- return ALIGN(i * sizeof (struct mlx4_wqe_inline_seg) + header_size, 16);
+ *mlx_seg_len =
+ ALIGN(i * sizeof (struct mlx4_wqe_inline_seg) + header_size, 16);
+ return 0;
}
static int mlx4_wq_overflow(struct mlx4_ib_wq *wq, int nreq, struct ib_cq *ib_cq)
@@ -1396,6 +1416,34 @@
dseg->addr = cpu_to_be64(sg->addr);
}
+static int build_lso_seg(struct mlx4_lso_seg *wqe, struct ib_send_wr *wr,
+ struct mlx4_ib_qp *qp, unsigned *lso_seg_len)
+{
+ unsigned halign = ALIGN(sizeof *wqe + wr->wr.ud.hlen, 16);
+
+ /*
+ * This is a temporary limitation and will be removed in
+ * a forthcoming FW release:
+ */
+ if (unlikely(halign > 64))
+ return -EINVAL;
+
+ if (unlikely(!(qp->flags & MLX4_IB_QP_LSO) &&
+ wr->num_sge > qp->sq.max_gs - (halign >> 4)))
+ return -EINVAL;
+
+ memcpy(wqe->header, wr->wr.ud.header, wr->wr.ud.hlen);
+
+ /* make sure LSO header is written before overwriting stamping */
+ wmb();
+
+ wqe->mss_hdr_size = cpu_to_be32((wr->wr.ud.mss - wr->wr.ud.hlen) << 16 |
+ wr->wr.ud.hlen);
+
+ *lso_seg_len = halign;
+ return 0;
+}
+
int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
struct ib_send_wr **bad_wr)
{
@@ -1409,6 +1457,7 @@
unsigned ind;
int uninitialized_var(stamp);
int uninitialized_var(size);
+ unsigned seglen;
int i;
spin_lock_irqsave(&qp->sq.lock, flags);
@@ -1436,11 +1485,14 @@
cpu_to_be32(MLX4_WQE_CTRL_CQ_UPDATE) : 0) |
(wr->send_flags & IB_SEND_SOLICITED ?
cpu_to_be32(MLX4_WQE_CTRL_SOLICITED) : 0) |
+ ((wr->send_flags & IB_SEND_IP_CSUM) ?
+ cpu_to_be32(MLX4_WQE_CTRL_IP_CSUM |
+ MLX4_WQE_CTRL_TCP_UDP_CSUM) : 0) |
qp->sq_signal_bits;
if (wr->opcode == IB_WR_SEND_WITH_IMM ||
wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM)
- ctrl->imm = wr->imm_data;
+ ctrl->imm = wr->ex.imm_data;
else
ctrl->imm = 0;
@@ -1484,19 +1536,27 @@
set_datagram_seg(wqe, wr);
wqe += sizeof (struct mlx4_wqe_datagram_seg);
size += sizeof (struct mlx4_wqe_datagram_seg) / 16;
+
+ if (wr->opcode == IB_WR_LSO) {
+ err = build_lso_seg(wqe, wr, qp, &seglen);
+ if (unlikely(err)) {
+ *bad_wr = wr;
+ goto out;
+ }
+ wqe += seglen;
+ size += seglen / 16;
+ }
break;
case IB_QPT_SMI:
case IB_QPT_GSI:
- err = build_mlx_header(to_msqp(qp), wr, ctrl);
- if (err < 0) {
+ err = build_mlx_header(to_msqp(qp), wr, ctrl, &seglen);
+ if (unlikely(err)) {
*bad_wr = wr;
goto out;
}
- wqe += err;
- size += err / 16;
-
- err = 0;
+ wqe += seglen;
+ size += seglen / 16;
break;
default:
@@ -1725,7 +1785,9 @@
struct mlx4_ib_qp *qp = to_mqp(ibqp);
struct mlx4_qp_context context;
int mlx4_state;
- int err;
+ int err = 0;
+
+ mutex_lock(&qp->mutex);
if (qp->state == IB_QPS_RESET) {
qp_attr->qp_state = IB_QPS_RESET;
@@ -1733,12 +1795,15 @@
}
err = mlx4_qp_query(dev->dev, &qp->mqp, &context);
- if (err)
- return -EINVAL;
+ if (err) {
+ err = -EINVAL;
+ goto out;
+ }
mlx4_state = be32_to_cpu(context.flags) >> 28;
- qp_attr->qp_state = to_ib_qp_state(mlx4_state);
+ qp->state = to_ib_qp_state(mlx4_state);
+ qp_attr->qp_state = qp->state;
qp_attr->path_mtu = context.mtu_msgmax >> 5;
qp_attr->path_mig_state =
to_ib_mig_state((be32_to_cpu(context.flags) >> 11) & 0x3);
@@ -1797,6 +1862,8 @@
qp_init_attr->cap = qp_attr->cap;
- return 0;
+out:
+ mutex_unlock(&qp->mutex);
+ return err;
}
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 09a30dd..54d230e 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -219,7 +219,7 @@
__raw_writel((__force u32) cpu_to_be32((1 << HCR_GO_BIT) |
(1 << HCA_E_BIT) |
(op_modifier << HCR_OPMOD_SHIFT) |
- op), ptr + offs[6]);
+ op), ptr + offs[6]);
wmb();
__raw_writel((__force u32) 0, ptr + offs[7]);
wmb();
@@ -1339,6 +1339,10 @@
/* Check port for UD address vector: */
*(inbox + INIT_HCA_FLAGS2_OFFSET / 4) |= cpu_to_be32(1);
+ /* Enable IPoIB checksumming if we can: */
+ if (dev->device_cap_flags & IB_DEVICE_UD_IP_CSUM)
+ *(inbox + INIT_HCA_FLAGS2_OFFSET / 4) |= cpu_to_be32(7 << 3);
+
/* We leave wqe_quota, responder_exu, etc as 0 (default) */
/* QPC/EEC/CQC/EQC/RDB attributes */
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h
index 2f976f2..8928ca4 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.h
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.h
@@ -103,6 +103,7 @@
DEV_LIM_FLAG_RAW_IPV6 = 1 << 4,
DEV_LIM_FLAG_RAW_ETHER = 1 << 5,
DEV_LIM_FLAG_SRQ = 1 << 6,
+ DEV_LIM_FLAG_IPOIB_CSUM = 1 << 7,
DEV_LIM_FLAG_BAD_PKEY_CNTR = 1 << 8,
DEV_LIM_FLAG_BAD_QKEY_CNTR = 1 << 9,
DEV_LIM_FLAG_MW = 1 << 16,
diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c
index 1e1e336..20401d2 100644
--- a/drivers/infiniband/hw/mthca/mthca_cq.c
+++ b/drivers/infiniband/hw/mthca/mthca_cq.c
@@ -119,7 +119,8 @@
__be32 my_qpn;
__be32 my_ee;
__be32 rqpn;
- __be16 sl_g_mlpath;
+ u8 sl_ipok;
+ u8 g_mlpath;
__be16 rlid;
__be32 imm_etype_pkey_eec;
__be32 byte_cnt;
@@ -493,6 +494,7 @@
int is_send;
int free_cqe = 1;
int err = 0;
+ u16 checksum;
cqe = next_cqe_sw(cq);
if (!cqe)
@@ -635,12 +637,14 @@
break;
}
entry->slid = be16_to_cpu(cqe->rlid);
- entry->sl = be16_to_cpu(cqe->sl_g_mlpath) >> 12;
+ entry->sl = cqe->sl_ipok >> 4;
entry->src_qp = be32_to_cpu(cqe->rqpn) & 0xffffff;
- entry->dlid_path_bits = be16_to_cpu(cqe->sl_g_mlpath) & 0x7f;
+ entry->dlid_path_bits = cqe->g_mlpath & 0x7f;
entry->pkey_index = be32_to_cpu(cqe->imm_etype_pkey_eec) >> 16;
- entry->wc_flags |= be16_to_cpu(cqe->sl_g_mlpath) & 0x80 ?
- IB_WC_GRH : 0;
+ entry->wc_flags |= cqe->g_mlpath & 0x80 ? IB_WC_GRH : 0;
+ checksum = (be32_to_cpu(cqe->rqpn) >> 24) |
+ ((be32_to_cpu(cqe->my_ee) >> 16) & 0xff00);
+ entry->csum_ok = (cqe->sl_ipok & 1 && checksum == 0xffff);
}
entry->status = IB_WC_SUCCESS;
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index 7bbdd1f..0e842e0 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -54,8 +54,8 @@
#define DRV_NAME "ib_mthca"
#define PFX DRV_NAME ": "
-#define DRV_VERSION "0.08"
-#define DRV_RELDATE "February 14, 2006"
+#define DRV_VERSION "1.0"
+#define DRV_RELDATE "April 4, 2008"
enum {
MTHCA_FLAG_DDR_HIDDEN = 1 << 1,
@@ -390,11 +390,11 @@
do { \
void *__p = (char *) (source) + (offset); \
switch (sizeof (dest)) { \
- case 1: (dest) = *(u8 *) __p; break; \
- case 2: (dest) = be16_to_cpup(__p); break; \
- case 4: (dest) = be32_to_cpup(__p); break; \
- case 8: (dest) = be64_to_cpup(__p); break; \
- default: __buggy_use_of_MTHCA_GET(); \
+ case 1: (dest) = *(u8 *) __p; break; \
+ case 2: (dest) = be16_to_cpup(__p); break; \
+ case 4: (dest) = be32_to_cpup(__p); break; \
+ case 8: (dest) = be64_to_cpup(__p); break; \
+ default: __buggy_use_of_MTHCA_GET(); \
} \
} while (0)
diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c
index b60eb5d..8bde7f9 100644
--- a/drivers/infiniband/hw/mthca/mthca_eq.c
+++ b/drivers/infiniband/hw/mthca/mthca_eq.c
@@ -232,9 +232,9 @@
return eq->page_list[off / PAGE_SIZE].buf + off % PAGE_SIZE;
}
-static inline struct mthca_eqe* next_eqe_sw(struct mthca_eq *eq)
+static inline struct mthca_eqe *next_eqe_sw(struct mthca_eq *eq)
{
- struct mthca_eqe* eqe;
+ struct mthca_eqe *eqe;
eqe = get_eqe(eq, eq->cons_index);
return (MTHCA_EQ_ENTRY_OWNER_HW & eqe->owner) ? NULL : eqe;
}
diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c
index acfa41d..8b7e83e 100644
--- a/drivers/infiniband/hw/mthca/mthca_mad.c
+++ b/drivers/infiniband/hw/mthca/mthca_mad.c
@@ -125,7 +125,7 @@
event.device = ibdev;
event.element.port_num = port_num;
- if(pinfo->clientrereg_resv_subnetto & 0x80)
+ if (pinfo->clientrereg_resv_subnetto & 0x80)
event.event = IB_EVENT_CLIENT_REREGISTER;
else
event.event = IB_EVENT_LID_CHANGE;
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index cd3d8ad..9ebadd6 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -267,11 +267,16 @@
if (dev_lim->flags & DEV_LIM_FLAG_SRQ)
mdev->mthca_flags |= MTHCA_FLAG_SRQ;
+ if (mthca_is_memfree(mdev))
+ if (dev_lim->flags & DEV_LIM_FLAG_IPOIB_CSUM)
+ mdev->device_cap_flags |= IB_DEVICE_UD_IP_CSUM;
+
return 0;
}
static int mthca_init_tavor(struct mthca_dev *mdev)
{
+ s64 size;
u8 status;
int err;
struct mthca_dev_lim dev_lim;
@@ -324,9 +329,11 @@
if (mdev->mthca_flags & MTHCA_FLAG_SRQ)
profile.num_srq = dev_lim.max_srqs;
- err = mthca_make_profile(mdev, &profile, &dev_lim, &init_hca);
- if (err < 0)
+ size = mthca_make_profile(mdev, &profile, &dev_lim, &init_hca);
+ if (size < 0) {
+ err = size;
goto err_disable;
+ }
err = mthca_INIT_HCA(mdev, &init_hca, &status);
if (err) {
@@ -605,7 +612,7 @@
struct mthca_dev_lim dev_lim;
struct mthca_profile profile;
struct mthca_init_hca_param init_hca;
- u64 icm_size;
+ s64 icm_size;
u8 status;
int err;
@@ -653,7 +660,7 @@
profile.num_srq = dev_lim.max_srqs;
icm_size = mthca_make_profile(mdev, &profile, &dev_lim, &init_hca);
- if ((int) icm_size < 0) {
+ if (icm_size < 0) {
err = icm_size;
goto err_stop_fw;
}
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c
index 252db08..b224079 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.c
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.c
@@ -359,12 +359,14 @@
int use_lowmem, int use_coherent)
{
struct mthca_icm_table *table;
+ int obj_per_chunk;
int num_icm;
unsigned chunk_size;
int i;
u8 status;
- num_icm = (obj_size * nobj + MTHCA_TABLE_CHUNK_SIZE - 1) / MTHCA_TABLE_CHUNK_SIZE;
+ obj_per_chunk = MTHCA_TABLE_CHUNK_SIZE / obj_size;
+ num_icm = DIV_ROUND_UP(nobj, obj_per_chunk);
table = kmalloc(sizeof *table + num_icm * sizeof *table->icm, GFP_KERNEL);
if (!table)
@@ -412,7 +414,7 @@
if (table->icm[i]) {
mthca_UNMAP_ICM(dev, virt + i * MTHCA_TABLE_CHUNK_SIZE,
MTHCA_TABLE_CHUNK_SIZE / MTHCA_ICM_PAGE_SIZE,
- &status);
+ &status);
mthca_free_icm(dev, table->icm[i], table->coherent);
}
diff --git a/drivers/infiniband/hw/mthca/mthca_profile.c b/drivers/infiniband/hw/mthca/mthca_profile.c
index 26bf86d..605a8d5 100644
--- a/drivers/infiniband/hw/mthca/mthca_profile.c
+++ b/drivers/infiniband/hw/mthca/mthca_profile.c
@@ -63,7 +63,7 @@
MTHCA_NUM_PDS = 1 << 15
};
-u64 mthca_make_profile(struct mthca_dev *dev,
+s64 mthca_make_profile(struct mthca_dev *dev,
struct mthca_profile *request,
struct mthca_dev_lim *dev_lim,
struct mthca_init_hca_param *init_hca)
@@ -77,7 +77,7 @@
};
u64 mem_base, mem_avail;
- u64 total_size = 0;
+ s64 total_size = 0;
struct mthca_resource *profile;
struct mthca_resource tmp;
int i, j;
diff --git a/drivers/infiniband/hw/mthca/mthca_profile.h b/drivers/infiniband/hw/mthca/mthca_profile.h
index 9464180..e76cb62 100644
--- a/drivers/infiniband/hw/mthca/mthca_profile.h
+++ b/drivers/infiniband/hw/mthca/mthca_profile.h
@@ -53,7 +53,7 @@
int fmr_reserved_mtts;
};
-u64 mthca_make_profile(struct mthca_dev *mdev,
+s64 mthca_make_profile(struct mthca_dev *mdev,
struct mthca_profile *request,
struct mthca_dev_lim *dev_lim,
struct mthca_init_hca_param *init_hca);
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 9e491df..81b257e 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -60,7 +60,7 @@
struct ib_smp *in_mad = NULL;
struct ib_smp *out_mad = NULL;
int err = -ENOMEM;
- struct mthca_dev* mdev = to_mdev(ibdev);
+ struct mthca_dev *mdev = to_mdev(ibdev);
u8 status;
@@ -540,6 +540,9 @@
struct mthca_qp *qp;
int err;
+ if (init_attr->create_flags)
+ return ERR_PTR(-EINVAL);
+
switch (init_attr->qp_type) {
case IB_QPT_RC:
case IB_QPT_UC:
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index db5595b..09dc361 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -437,29 +437,34 @@
int mthca_state;
u8 status;
+ mutex_lock(&qp->mutex);
+
if (qp->state == IB_QPS_RESET) {
qp_attr->qp_state = IB_QPS_RESET;
goto done;
}
mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL);
- if (IS_ERR(mailbox))
- return PTR_ERR(mailbox);
+ if (IS_ERR(mailbox)) {
+ err = PTR_ERR(mailbox);
+ goto out;
+ }
err = mthca_QUERY_QP(dev, qp->qpn, 0, mailbox, &status);
if (err)
- goto out;
+ goto out_mailbox;
if (status) {
mthca_warn(dev, "QUERY_QP returned status %02x\n", status);
err = -EINVAL;
- goto out;
+ goto out_mailbox;
}
qp_param = mailbox->buf;
context = &qp_param->context;
mthca_state = be32_to_cpu(context->flags) >> 28;
- qp_attr->qp_state = to_ib_qp_state(mthca_state);
+ qp->state = to_ib_qp_state(mthca_state);
+ qp_attr->qp_state = qp->state;
qp_attr->path_mtu = context->mtu_msgmax >> 5;
qp_attr->path_mig_state =
to_ib_mig_state((be32_to_cpu(context->flags) >> 11) & 0x3);
@@ -506,8 +511,11 @@
qp_init_attr->cap = qp_attr->cap;
-out:
+out_mailbox:
mthca_free_mailbox(dev, mailbox);
+
+out:
+ mutex_unlock(&qp->mutex);
return err;
}
@@ -1532,7 +1540,7 @@
case IB_WR_SEND_WITH_IMM:
sqp->ud_header.bth.opcode = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE;
sqp->ud_header.immediate_present = 1;
- sqp->ud_header.immediate_data = wr->imm_data;
+ sqp->ud_header.immediate_data = wr->ex.imm_data;
break;
default:
return -EINVAL;
@@ -1679,7 +1687,7 @@
cpu_to_be32(1);
if (wr->opcode == IB_WR_SEND_WITH_IMM ||
wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM)
- ((struct mthca_next_seg *) wqe)->imm = wr->imm_data;
+ ((struct mthca_next_seg *) wqe)->imm = wr->ex.imm_data;
wqe += sizeof (struct mthca_next_seg);
size = sizeof (struct mthca_next_seg) / 16;
@@ -2015,10 +2023,12 @@
cpu_to_be32(MTHCA_NEXT_CQ_UPDATE) : 0) |
((wr->send_flags & IB_SEND_SOLICITED) ?
cpu_to_be32(MTHCA_NEXT_SOLICIT) : 0) |
+ ((wr->send_flags & IB_SEND_IP_CSUM) ?
+ cpu_to_be32(MTHCA_NEXT_IP_CSUM | MTHCA_NEXT_TCP_UDP_CSUM) : 0) |
cpu_to_be32(1);
if (wr->opcode == IB_WR_SEND_WITH_IMM ||
wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM)
- ((struct mthca_next_seg *) wqe)->imm = wr->imm_data;
+ ((struct mthca_next_seg *) wqe)->imm = wr->ex.imm_data;
wqe += sizeof (struct mthca_next_seg);
size = sizeof (struct mthca_next_seg) / 16;
diff --git a/drivers/infiniband/hw/mthca/mthca_wqe.h b/drivers/infiniband/hw/mthca/mthca_wqe.h
index f6a66fe..b3551a8 100644
--- a/drivers/infiniband/hw/mthca/mthca_wqe.h
+++ b/drivers/infiniband/hw/mthca/mthca_wqe.h
@@ -38,14 +38,16 @@
#include <linux/types.h>
enum {
- MTHCA_NEXT_DBD = 1 << 7,
- MTHCA_NEXT_FENCE = 1 << 6,
- MTHCA_NEXT_CQ_UPDATE = 1 << 3,
- MTHCA_NEXT_EVENT_GEN = 1 << 2,
- MTHCA_NEXT_SOLICIT = 1 << 1,
+ MTHCA_NEXT_DBD = 1 << 7,
+ MTHCA_NEXT_FENCE = 1 << 6,
+ MTHCA_NEXT_CQ_UPDATE = 1 << 3,
+ MTHCA_NEXT_EVENT_GEN = 1 << 2,
+ MTHCA_NEXT_SOLICIT = 1 << 1,
+ MTHCA_NEXT_IP_CSUM = 1 << 4,
+ MTHCA_NEXT_TCP_UDP_CSUM = 1 << 5,
- MTHCA_MLX_VL15 = 1 << 17,
- MTHCA_MLX_SLR = 1 << 16
+ MTHCA_MLX_VL15 = 1 << 17,
+ MTHCA_MLX_SLR = 1 << 16
};
enum {
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index b2112f5..b00b0e3 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -65,7 +65,6 @@
MODULE_VERSION(DRV_VERSION);
int max_mtu = 9000;
-int nics_per_function = 1;
int interrupt_mod_interval = 0;
@@ -93,15 +92,9 @@
MODULE_PARM_DESC(debug_level, "Enable debug output level");
LIST_HEAD(nes_adapter_list);
-LIST_HEAD(nes_dev_list);
+static LIST_HEAD(nes_dev_list);
atomic_t qps_destroyed;
-atomic_t cqp_reqs_allocated;
-atomic_t cqp_reqs_freed;
-atomic_t cqp_reqs_dynallocated;
-atomic_t cqp_reqs_dynfreed;
-atomic_t cqp_reqs_queued;
-atomic_t cqp_reqs_redriven;
static void nes_print_macaddr(struct net_device *netdev);
static irqreturn_t nes_interrupt(int, void *);
@@ -310,7 +303,7 @@
if (atomic_read(&nesqp->refcount) == 0) {
printk(KERN_INFO PFX "%s: Reference count already 0 for QP%d, last aeq = 0x%04X.\n",
- __FUNCTION__, ibqp->qp_num, nesqp->last_aeq);
+ __func__, ibqp->qp_num, nesqp->last_aeq);
BUG();
}
@@ -751,13 +744,13 @@
list_del(&nesdev->list);
nes_destroy_cqp(nesdev);
+
+ free_irq(pcidev->irq, nesdev);
tasklet_kill(&nesdev->dpc_tasklet);
/* Deallocate the Adapter Structure */
nes_destroy_adapter(nesdev->nesadapter);
- free_irq(pcidev->irq, nesdev);
-
if (nesdev->msi_enabled) {
pci_disable_msi(pcidev);
}
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index a48b288..1626124 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -143,12 +143,12 @@
#ifdef CONFIG_INFINIBAND_NES_DEBUG
#define nes_debug(level, fmt, args...) \
if (level & nes_debug_level) \
- printk(KERN_ERR PFX "%s[%u]: " fmt, __FUNCTION__, __LINE__, ##args)
+ printk(KERN_ERR PFX "%s[%u]: " fmt, __func__, __LINE__, ##args)
#define assert(expr) \
if (!(expr)) { \
printk(KERN_ERR PFX "Assertion failed! %s, %s, %s, line %d\n", \
- #expr, __FILE__, __FUNCTION__, __LINE__); \
+ #expr, __FILE__, __func__, __LINE__); \
}
#define NES_EVENT_TIMEOUT 1200000
@@ -166,7 +166,6 @@
#include "nes_cm.h"
extern int max_mtu;
-extern int nics_per_function;
#define max_frame_len (max_mtu+ETH_HLEN)
extern int interrupt_mod_interval;
extern int nes_if_count;
@@ -177,9 +176,6 @@
extern unsigned int nes_debug_level;
extern struct list_head nes_adapter_list;
-extern struct list_head nes_dev_list;
-
-extern struct nes_cm_core *g_cm_core;
extern atomic_t cm_connects;
extern atomic_t cm_accepts;
@@ -209,7 +205,6 @@
extern atomic_t cm_accel_dropped_pkts;
extern atomic_t cm_resets_recvd;
-extern u32 crit_err_count;
extern u32 int_mod_timer_init;
extern u32 int_mod_cq_depth_256;
extern u32 int_mod_cq_depth_128;
@@ -219,14 +214,6 @@
extern u32 int_mod_cq_depth_4;
extern u32 int_mod_cq_depth_1;
-extern atomic_t cqp_reqs_allocated;
-extern atomic_t cqp_reqs_freed;
-extern atomic_t cqp_reqs_dynallocated;
-extern atomic_t cqp_reqs_dynfreed;
-extern atomic_t cqp_reqs_queued;
-extern atomic_t cqp_reqs_redriven;
-
-
struct nes_device {
struct nes_adapter *nesadapter;
void __iomem *regs;
@@ -412,7 +399,7 @@
if (resource_num >= max_resources) {
resource_num = find_first_zero_bit(resource_array, max_resources);
if (resource_num >= max_resources) {
- printk(KERN_ERR PFX "%s: No available resourcess.\n", __FUNCTION__);
+ printk(KERN_ERR PFX "%s: No available resourcess.\n", __func__);
spin_unlock_irqrestore(&nesadapter->resource_lock, flags);
return -EMFILE;
}
@@ -510,9 +497,6 @@
/* nes_hw.c */
struct nes_adapter *nes_init_adapter(struct nes_device *, u8);
void nes_nic_init_timer_defaults(struct nes_device *, u8);
-unsigned int nes_reset_adapter_ne020(struct nes_device *, u8 *);
-int nes_init_serdes(struct nes_device *, u8, u8, u8);
-void nes_init_csr_ne020(struct nes_device *, u8, u8);
void nes_destroy_adapter(struct nes_adapter *);
int nes_init_cqp(struct nes_device *);
int nes_init_phy(struct nes_device *);
@@ -520,20 +504,12 @@
void nes_destroy_nic_qp(struct nes_vnic *);
int nes_napi_isr(struct nes_device *);
void nes_dpc(unsigned long);
-void nes_process_ceq(struct nes_device *, struct nes_hw_ceq *);
-void nes_process_aeq(struct nes_device *, struct nes_hw_aeq *);
-void nes_process_mac_intr(struct nes_device *, u32);
-void nes_nic_napi_ce_handler(struct nes_device *, struct nes_hw_nic_cq *);
void nes_nic_ce_handler(struct nes_device *, struct nes_hw_nic_cq *);
-void nes_cqp_ce_handler(struct nes_device *, struct nes_hw_cq *);
-void nes_process_iwarp_aeqe(struct nes_device *, struct nes_hw_aeqe *);
void nes_iwarp_ce_handler(struct nes_device *, struct nes_hw_cq *);
int nes_destroy_cqp(struct nes_device *);
int nes_nic_cm_xmit(struct sk_buff *, struct net_device *);
/* nes_nic.c */
-void nes_netdev_set_multicast_list(struct net_device *);
-void nes_netdev_exit(struct nes_vnic *);
struct net_device *nes_netdev_init(struct nes_device *, void __iomem *);
void nes_netdev_destroy(struct net_device *);
int nes_nic_cm_xmit(struct sk_buff *, struct net_device *);
@@ -544,7 +520,6 @@
void nes_update_arp(unsigned char *, u32, u32, u16, u16);
void nes_manage_arp_cache(struct net_device *, unsigned char *, u32, u32);
void nes_sock_release(struct nes_qp *, unsigned long *);
-struct nes_cm_core *nes_cm_alloc_core(void);
void flush_wqes(struct nes_device *nesdev, struct nes_qp *, u32, u32);
int nes_manage_apbvt(struct nes_vnic *, u32, u32, u32);
int nes_cm_disconn(struct nes_qp *);
@@ -556,7 +531,6 @@
struct nes_ib_device *nes_init_ofa_device(struct net_device *);
void nes_destroy_ofa_device(struct nes_ib_device *);
int nes_register_ofa_device(struct nes_ib_device *);
-void nes_unregister_ofa_device(struct nes_ib_device *);
/* nes_util.c */
int nes_read_eeprom_values(struct nes_device *, struct nes_adapter *);
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 0bef878..d073862 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -80,7 +80,30 @@
static int add_ref_cm_node(struct nes_cm_node *);
static int rem_ref_cm_node(struct nes_cm_core *, struct nes_cm_node *);
static int mini_cm_del_listen(struct nes_cm_core *, struct nes_cm_listener *);
+static struct sk_buff *form_cm_frame(struct sk_buff *, struct nes_cm_node *,
+ void *, u32, void *, u32, u8);
+static struct sk_buff *get_free_pkt(struct nes_cm_node *cm_node);
+static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *,
+ struct nes_vnic *,
+ struct ietf_mpa_frame *,
+ struct nes_cm_info *);
+static int mini_cm_accept(struct nes_cm_core *, struct ietf_mpa_frame *,
+ struct nes_cm_node *);
+static int mini_cm_reject(struct nes_cm_core *, struct ietf_mpa_frame *,
+ struct nes_cm_node *);
+static int mini_cm_close(struct nes_cm_core *, struct nes_cm_node *);
+static int mini_cm_recv_pkt(struct nes_cm_core *, struct nes_vnic *,
+ struct sk_buff *);
+static int mini_cm_dealloc_core(struct nes_cm_core *);
+static int mini_cm_get(struct nes_cm_core *);
+static int mini_cm_set(struct nes_cm_core *, u32, u32);
+static int nes_cm_disconn_true(struct nes_qp *);
+static int nes_cm_post_event(struct nes_cm_event *event);
+static int nes_disconnect(struct nes_qp *nesqp, int abrupt);
+static void nes_disconnect_worker(struct work_struct *work);
+static int send_ack(struct nes_cm_node *cm_node);
+static int send_fin(struct nes_cm_node *cm_node, struct sk_buff *skb);
/* External CM API Interface */
/* instance of function pointers for client API */
@@ -99,7 +122,7 @@
mini_cm_set
};
-struct nes_cm_core *g_cm_core;
+static struct nes_cm_core *g_cm_core;
atomic_t cm_connects;
atomic_t cm_accepts;
@@ -149,7 +172,7 @@
/**
* send_mpa_request
*/
-int send_mpa_request(struct nes_cm_node *cm_node)
+static int send_mpa_request(struct nes_cm_node *cm_node)
{
struct sk_buff *skb;
int ret;
@@ -243,8 +266,9 @@
* form_cm_frame - get a free packet and build empty frame Use
* node info to build.
*/
-struct sk_buff *form_cm_frame(struct sk_buff *skb, struct nes_cm_node *cm_node,
- void *options, u32 optionsize, void *data, u32 datasize, u8 flags)
+static struct sk_buff *form_cm_frame(struct sk_buff *skb, struct nes_cm_node *cm_node,
+ void *options, u32 optionsize, void *data,
+ u32 datasize, u8 flags)
{
struct tcphdr *tcph;
struct iphdr *iph;
@@ -342,7 +366,6 @@
if (!core)
return;
nes_debug(NES_DBG_CM, "---------------------------------------------\n");
- nes_debug(NES_DBG_CM, "Session ID : %u \n", atomic_read(&core->session_id));
nes_debug(NES_DBG_CM, "State : %u \n", core->state);
@@ -395,7 +418,7 @@
}
if (type == NES_TIMER_TYPE_SEND) {
- new_send->seq_num = htonl(tcp_hdr(skb)->seq);
+ new_send->seq_num = ntohl(tcp_hdr(skb)->seq);
atomic_inc(&new_send->skb->users);
ret = nes_nic_cm_xmit(new_send->skb, cm_node->netdev);
@@ -420,7 +443,7 @@
spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
}
if (type == NES_TIMER_TYPE_RECV) {
- new_send->seq_num = htonl(tcp_hdr(skb)->seq);
+ new_send->seq_num = ntohl(tcp_hdr(skb)->seq);
new_send->timetosend = jiffies;
spin_lock_irqsave(&cm_node->recv_list_lock, flags);
list_add_tail(&new_send->list, &cm_node->recv_list);
@@ -442,7 +465,7 @@
/**
* nes_cm_timer_tick
*/
-void nes_cm_timer_tick(unsigned long pass)
+static void nes_cm_timer_tick(unsigned long pass)
{
unsigned long flags, qplockflags;
unsigned long nexttimeout = jiffies + NES_LONG_TIME;
@@ -644,7 +667,7 @@
/**
* send_syn
*/
-int send_syn(struct nes_cm_node *cm_node, u32 sendack)
+static int send_syn(struct nes_cm_node *cm_node, u32 sendack)
{
int ret;
int flags = SET_SYN;
@@ -710,7 +733,7 @@
/**
* send_reset
*/
-int send_reset(struct nes_cm_node *cm_node)
+static int send_reset(struct nes_cm_node *cm_node)
{
int ret;
struct sk_buff *skb = get_free_pkt(cm_node);
@@ -732,7 +755,7 @@
/**
* send_ack
*/
-int send_ack(struct nes_cm_node *cm_node)
+static int send_ack(struct nes_cm_node *cm_node)
{
int ret;
struct sk_buff *skb = get_free_pkt(cm_node);
@@ -752,7 +775,7 @@
/**
* send_fin
*/
-int send_fin(struct nes_cm_node *cm_node, struct sk_buff *skb)
+static int send_fin(struct nes_cm_node *cm_node, struct sk_buff *skb)
{
int ret;
@@ -775,7 +798,7 @@
/**
* get_free_pkt
*/
-struct sk_buff *get_free_pkt(struct nes_cm_node *cm_node)
+static struct sk_buff *get_free_pkt(struct nes_cm_node *cm_node)
{
struct sk_buff *skb, *new_skb;
@@ -820,7 +843,6 @@
{
unsigned long flags;
u32 hashkey;
- struct list_head *list_pos;
struct list_head *hte;
struct nes_cm_node *cm_node;
@@ -835,8 +857,7 @@
/* walk list and find cm_node associated with this session ID */
spin_lock_irqsave(&cm_core->ht_lock, flags);
- list_for_each(list_pos, hte) {
- cm_node = container_of(list_pos, struct nes_cm_node, list);
+ list_for_each_entry(cm_node, hte, list) {
/* compare quad, return node handle if a match */
nes_debug(NES_DBG_CM, "finding node %x:%x =? %x:%x ^ %x:%x =? %x:%x\n",
cm_node->loc_addr, cm_node->loc_port,
@@ -864,13 +885,11 @@
nes_addr_t dst_addr, u16 dst_port, enum nes_cm_listener_state listener_state)
{
unsigned long flags;
- struct list_head *listen_list;
struct nes_cm_listener *listen_node;
/* walk list and find cm_node associated with this session ID */
spin_lock_irqsave(&cm_core->listen_list_lock, flags);
- list_for_each(listen_list, &cm_core->listen_list.list) {
- listen_node = container_of(listen_list, struct nes_cm_listener, list);
+ list_for_each_entry(listen_node, &cm_core->listen_list.list, list) {
/* compare node pair, return node handle if a match */
if (((listen_node->loc_addr == dst_addr) ||
listen_node->loc_addr == 0x00000000) &&
@@ -1014,7 +1033,7 @@
fl.nl_u.ip4_u.daddr = htonl(dst_ip);
if (ip_route_output_key(&init_net, &rt, &fl)) {
printk("%s: ip_route_output_key failed for 0x%08X\n",
- __FUNCTION__, dst_ip);
+ __func__, dst_ip);
return;
}
@@ -1077,8 +1096,6 @@
cm_node->tcp_cntxt.rcv_nxt = 0;
/* get a unique session ID , add thread_id to an upcounter to handle race */
atomic_inc(&cm_core->node_cnt);
- atomic_inc(&cm_core->session_id);
- cm_node->session_id = (u32)(atomic_read(&cm_core->session_id) + current->tgid);
cm_node->conn_type = cm_info->conn_type;
cm_node->apbvt_set = 0;
cm_node->accept_pend = 0;
@@ -1239,7 +1256,7 @@
continue;
case OPTION_NUMBER_MSS:
nes_debug(NES_DBG_CM, "%s: MSS Length: %d Offset: %d Size: %d\n",
- __FUNCTION__,
+ __func__,
all_options->as_mss.length, offset, optionsize);
got_mss_option = 1;
if (all_options->as_mss.length != 4) {
@@ -1272,8 +1289,8 @@
/**
* process_packet
*/
-int process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb,
- struct nes_cm_core *cm_core)
+static int process_packet(struct nes_cm_node *cm_node, struct sk_buff *skb,
+ struct nes_cm_core *cm_core)
{
int optionsize;
int datasize;
@@ -1360,7 +1377,7 @@
if (optionsize) {
u8 *optionsloc = (u8 *)&tcph[1];
if (process_options(cm_node, optionsloc, optionsize, (u32)tcph->syn)) {
- nes_debug(NES_DBG_CM, "%s: Node %p, Sending RESET\n", __FUNCTION__, cm_node);
+ nes_debug(NES_DBG_CM, "%s: Node %p, Sending RESET\n", __func__, cm_node);
send_reset(cm_node);
if (cm_node->state != NES_CM_STATE_SYN_SENT)
rem_ref_cm_node(cm_core, cm_node);
@@ -1605,9 +1622,7 @@
listener->cm_core = cm_core;
listener->nesvnic = nesvnic;
atomic_inc(&cm_core->node_cnt);
- atomic_inc(&cm_core->session_id);
- listener->session_id = (u32)(atomic_read(&cm_core->session_id) + current->tgid);
listener->conn_type = cm_info->conn_type;
listener->backlog = cm_info->backlog;
listener->listener_state = NES_CM_LISTENER_ACTIVE_STATE;
@@ -1631,9 +1646,10 @@
/**
* mini_cm_connect - make a connection node with params
*/
-struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
- struct nes_vnic *nesvnic, struct ietf_mpa_frame *mpa_frame,
- struct nes_cm_info *cm_info)
+static struct nes_cm_node *mini_cm_connect(struct nes_cm_core *cm_core,
+ struct nes_vnic *nesvnic,
+ struct ietf_mpa_frame *mpa_frame,
+ struct nes_cm_info *cm_info)
{
int ret = 0;
struct nes_cm_node *cm_node;
@@ -1717,8 +1733,8 @@
* mini_cm_accept - accept a connection
* This function is never called
*/
-int mini_cm_accept(struct nes_cm_core *cm_core, struct ietf_mpa_frame *mpa_frame,
- struct nes_cm_node *cm_node)
+static int mini_cm_accept(struct nes_cm_core *cm_core, struct ietf_mpa_frame *mpa_frame,
+ struct nes_cm_node *cm_node)
{
return 0;
}
@@ -1727,9 +1743,9 @@
/**
* mini_cm_reject - reject and teardown a connection
*/
-int mini_cm_reject(struct nes_cm_core *cm_core,
- struct ietf_mpa_frame *mpa_frame,
- struct nes_cm_node *cm_node)
+static int mini_cm_reject(struct nes_cm_core *cm_core,
+ struct ietf_mpa_frame *mpa_frame,
+ struct nes_cm_node *cm_node)
{
int ret = 0;
struct sk_buff *skb;
@@ -1761,7 +1777,7 @@
/**
* mini_cm_close
*/
-int mini_cm_close(struct nes_cm_core *cm_core, struct nes_cm_node *cm_node)
+static int mini_cm_close(struct nes_cm_core *cm_core, struct nes_cm_node *cm_node)
{
int ret = 0;
@@ -1808,8 +1824,8 @@
* recv_pkt - recv an ETHERNET packet, and process it through CM
* node state machine
*/
-int mini_cm_recv_pkt(struct nes_cm_core *cm_core, struct nes_vnic *nesvnic,
- struct sk_buff *skb)
+static int mini_cm_recv_pkt(struct nes_cm_core *cm_core, struct nes_vnic *nesvnic,
+ struct sk_buff *skb)
{
struct nes_cm_node *cm_node = NULL;
struct nes_cm_listener *listener = NULL;
@@ -1898,7 +1914,7 @@
/**
* nes_cm_alloc_core - allocate a top level instance of a cm core
*/
-struct nes_cm_core *nes_cm_alloc_core(void)
+static struct nes_cm_core *nes_cm_alloc_core(void)
{
int i;
@@ -1919,7 +1935,6 @@
cm_core->state = NES_CM_STATE_INITED;
cm_core->free_tx_pkt_max = NES_CM_DEFAULT_FREE_PKTS;
- atomic_set(&cm_core->session_id, 0);
atomic_set(&cm_core->events_posted, 0);
/* init the packet lists */
@@ -1958,7 +1973,7 @@
/**
* mini_cm_dealloc_core - deallocate a top level instance of a cm core
*/
-int mini_cm_dealloc_core(struct nes_cm_core *cm_core)
+static int mini_cm_dealloc_core(struct nes_cm_core *cm_core)
{
nes_debug(NES_DBG_CM, "De-Alloc CM Core (%p)\n", cm_core);
@@ -1983,7 +1998,7 @@
/**
* mini_cm_get
*/
-int mini_cm_get(struct nes_cm_core *cm_core)
+static int mini_cm_get(struct nes_cm_core *cm_core)
{
return cm_core->state;
}
@@ -1992,7 +2007,7 @@
/**
* mini_cm_set
*/
-int mini_cm_set(struct nes_cm_core *cm_core, u32 type, u32 value)
+static int mini_cm_set(struct nes_cm_core *cm_core, u32 type, u32 value)
{
int ret = 0;
@@ -2109,7 +2124,7 @@
/**
* nes_disconnect_worker
*/
-void nes_disconnect_worker(struct work_struct *work)
+static void nes_disconnect_worker(struct work_struct *work)
{
struct nes_qp *nesqp = container_of(work, struct nes_qp, disconn_work);
@@ -2122,7 +2137,7 @@
/**
* nes_cm_disconn_true
*/
-int nes_cm_disconn_true(struct nes_qp *nesqp)
+static int nes_cm_disconn_true(struct nes_qp *nesqp)
{
unsigned long flags;
int ret = 0;
@@ -2265,7 +2280,7 @@
/**
* nes_disconnect
*/
-int nes_disconnect(struct nes_qp *nesqp, int abrupt)
+static int nes_disconnect(struct nes_qp *nesqp, int abrupt)
{
int ret = 0;
struct nes_vnic *nesvnic;
@@ -2482,7 +2497,7 @@
}
if (ret)
printk("%s[%u] OFA CM event_handler returned, ret=%d\n",
- __FUNCTION__, __LINE__, ret);
+ __func__, __LINE__, ret);
return 0;
}
@@ -2650,7 +2665,7 @@
cm_node = g_cm_core->api->listen(g_cm_core, nesvnic, &cm_info);
if (!cm_node) {
printk("%s[%u] Error returned from listen API call\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return -ENOMEM;
}
@@ -2740,7 +2755,7 @@
* cm_event_connected
* handle a connected event, setup QPs and HW
*/
-void cm_event_connected(struct nes_cm_event *event)
+static void cm_event_connected(struct nes_cm_event *event)
{
u64 u64temp;
struct nes_qp *nesqp;
@@ -2864,7 +2879,7 @@
if (ret)
printk("%s[%u] OFA CM event_handler returned, ret=%d\n",
- __FUNCTION__, __LINE__, ret);
+ __func__, __LINE__, ret);
nes_debug(NES_DBG_CM, "Exiting connect thread for QP%u. jiffies = %lu\n",
nesqp->hwqp.qp_id, jiffies );
@@ -2877,7 +2892,7 @@
/**
* cm_event_connect_error
*/
-void cm_event_connect_error(struct nes_cm_event *event)
+static void cm_event_connect_error(struct nes_cm_event *event)
{
struct nes_qp *nesqp;
struct iw_cm_id *cm_id;
@@ -2919,7 +2934,7 @@
nes_debug(NES_DBG_CM, "OFA CM event_handler returned, ret=%d\n", ret);
if (ret)
printk("%s[%u] OFA CM event_handler returned, ret=%d\n",
- __FUNCTION__, __LINE__, ret);
+ __func__, __LINE__, ret);
nes_rem_ref(&nesqp->ibqp);
cm_id->rem_ref(cm_id);
@@ -2930,7 +2945,7 @@
/**
* cm_event_reset
*/
-void cm_event_reset(struct nes_cm_event *event)
+static void cm_event_reset(struct nes_cm_event *event)
{
struct nes_qp *nesqp;
struct iw_cm_id *cm_id;
@@ -2973,7 +2988,7 @@
/**
* cm_event_mpa_req
*/
-void cm_event_mpa_req(struct nes_cm_event *event)
+static void cm_event_mpa_req(struct nes_cm_event *event)
{
struct iw_cm_id *cm_id;
struct iw_cm_event cm_event;
@@ -3007,7 +3022,7 @@
ret = cm_id->event_handler(cm_id, &cm_event);
if (ret)
printk("%s[%u] OFA CM event_handler returned, ret=%d\n",
- __FUNCTION__, __LINE__, ret);
+ __func__, __LINE__, ret);
return;
}
@@ -3019,7 +3034,7 @@
* nes_cm_post_event
* post an event to the cm event handler
*/
-int nes_cm_post_event(struct nes_cm_event *event)
+static int nes_cm_post_event(struct nes_cm_event *event)
{
atomic_inc(&event->cm_node->cm_core->events_posted);
add_ref_cm_node(event->cm_node);
diff --git a/drivers/infiniband/hw/nes/nes_cm.h b/drivers/infiniband/hw/nes/nes_cm.h
index a59f0a7..7717cb2 100644
--- a/drivers/infiniband/hw/nes/nes_cm.h
+++ b/drivers/infiniband/hw/nes/nes_cm.h
@@ -225,7 +225,6 @@
struct nes_cm_listener {
struct list_head list;
- u64 session_id;
struct nes_cm_core *cm_core;
u8 loc_mac[ETH_ALEN];
nes_addr_t loc_addr;
@@ -242,7 +241,6 @@
/* per connection node and node state information */
struct nes_cm_node {
- u64 session_id;
u32 hashkey;
nes_addr_t loc_addr, rem_addr;
@@ -327,7 +325,6 @@
struct nes_cm_core {
enum nes_cm_node_state state;
- atomic_t session_id;
atomic_t listen_node_cnt;
struct nes_cm_node listen_list;
@@ -383,35 +380,10 @@
int (*set)(struct nes_cm_core *, u32, u32);
};
-
-int send_mpa_request(struct nes_cm_node *);
-struct sk_buff *form_cm_frame(struct sk_buff *, struct nes_cm_node *,
- void *, u32, void *, u32, u8);
int schedule_nes_timer(struct nes_cm_node *, struct sk_buff *,
enum nes_timer_type, int, int);
-void nes_cm_timer_tick(unsigned long);
-int send_syn(struct nes_cm_node *, u32);
-int send_reset(struct nes_cm_node *);
-int send_ack(struct nes_cm_node *);
-int send_fin(struct nes_cm_node *, struct sk_buff *);
-struct sk_buff *get_free_pkt(struct nes_cm_node *);
-int process_packet(struct nes_cm_node *, struct sk_buff *, struct nes_cm_core *);
-
-struct nes_cm_node * mini_cm_connect(struct nes_cm_core *,
- struct nes_vnic *, struct ietf_mpa_frame *, struct nes_cm_info *);
-int mini_cm_accept(struct nes_cm_core *, struct ietf_mpa_frame *, struct nes_cm_node *);
-int mini_cm_reject(struct nes_cm_core *, struct ietf_mpa_frame *, struct nes_cm_node *);
-int mini_cm_close(struct nes_cm_core *, struct nes_cm_node *);
-int mini_cm_recv_pkt(struct nes_cm_core *, struct nes_vnic *, struct sk_buff *);
-struct nes_cm_core *mini_cm_alloc_core(struct nes_cm_info *);
-int mini_cm_dealloc_core(struct nes_cm_core *);
-int mini_cm_get(struct nes_cm_core *);
-int mini_cm_set(struct nes_cm_core *, u32, u32);
int nes_cm_disconn(struct nes_qp *);
-void nes_disconnect_worker(struct work_struct *);
-int nes_cm_disconn_true(struct nes_qp *);
-int nes_disconnect(struct nes_qp *, int);
int nes_accept(struct iw_cm_id *, struct iw_cm_conn_param *);
int nes_reject(struct iw_cm_id *, const void *, u8);
@@ -423,11 +395,4 @@
int nes_cm_start(void);
int nes_cm_stop(void);
-/* CM event handler functions */
-void cm_event_connected(struct nes_cm_event *);
-void cm_event_connect_error(struct nes_cm_event *);
-void cm_event_reset(struct nes_cm_event *);
-void cm_event_mpa_req(struct nes_cm_event *);
-int nes_cm_post_event(struct nes_cm_event *);
-
#endif /* NES_CM_H */
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 49e53e4..aa53aab 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -41,7 +41,7 @@
#include "nes.h"
-u32 crit_err_count = 0;
+static u32 crit_err_count;
u32 int_mod_timer_init;
u32 int_mod_cq_depth_256;
u32 int_mod_cq_depth_128;
@@ -53,6 +53,17 @@
#include "nes_cm.h"
+static void nes_cqp_ce_handler(struct nes_device *nesdev, struct nes_hw_cq *cq);
+static void nes_init_csr_ne020(struct nes_device *nesdev, u8 hw_rev, u8 port_count);
+static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count,
+ u8 OneG_Mode);
+static void nes_nic_napi_ce_handler(struct nes_device *nesdev, struct nes_hw_nic_cq *cq);
+static void nes_process_aeq(struct nes_device *nesdev, struct nes_hw_aeq *aeq);
+static void nes_process_ceq(struct nes_device *nesdev, struct nes_hw_ceq *ceq);
+static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
+ struct nes_hw_aeqe *aeqe);
+static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number);
+static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_Mode);
#ifdef CONFIG_INFINIBAND_NES_DEBUG
static unsigned char *nes_iwarp_state_str[] = {
@@ -370,7 +381,7 @@
nesadapter->et_use_adaptive_rx_coalesce = 1;
nesadapter->timer_int_limit = NES_TIMER_INT_LIMIT_DYNAMIC;
nesadapter->et_rx_coalesce_usecs_irq = 0;
- printk(PFX "%s: Using Adaptive Interrupt Moderation\n", __FUNCTION__);
+ printk(PFX "%s: Using Adaptive Interrupt Moderation\n", __func__);
}
/* Setup and enable the periodic timer */
if (nesadapter->et_rx_coalesce_usecs_irq)
@@ -382,7 +393,7 @@
nesadapter->base_pd = 1;
nesadapter->device_cap_flags =
- IB_DEVICE_ZERO_STAG | IB_DEVICE_SEND_W_INV | IB_DEVICE_MEM_WINDOW;
+ IB_DEVICE_ZERO_STAG | IB_DEVICE_MEM_WINDOW;
nesadapter->allocated_qps = (unsigned long *)&(((unsigned char *)nesadapter)
[(sizeof(struct nes_adapter)+(sizeof(unsigned long)-1))&(~(sizeof(unsigned long)-1))]);
@@ -572,7 +583,7 @@
if (vendor_id == 0xffff)
break;
}
- nes_debug(NES_DBG_INIT, "%s %d functions found for %s.\n", __FUNCTION__,
+ nes_debug(NES_DBG_INIT, "%s %d functions found for %s.\n", __func__,
func_index, pci_name(nesdev->pcidev));
nesadapter->adapter_fcn_count = func_index;
@@ -583,7 +594,7 @@
/**
* nes_reset_adapter_ne020
*/
-unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_Mode)
+static unsigned int nes_reset_adapter_ne020(struct nes_device *nesdev, u8 *OneG_Mode)
{
u32 port_count;
u32 u32temp;
@@ -691,7 +702,8 @@
/**
* nes_init_serdes
*/
-int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count, u8 OneG_Mode)
+static int nes_init_serdes(struct nes_device *nesdev, u8 hw_rev, u8 port_count,
+ u8 OneG_Mode)
{
int i;
u32 u32temp;
@@ -739,7 +751,7 @@
& 0x0000000f)) != 0x0000000f) && (i++ < 5000))
mdelay(1);
if (i >= 5000) {
- printk("%s: Init: serdes 1 not ready, status=%x\n", __FUNCTION__, u32temp);
+ printk("%s: Init: serdes 1 not ready, status=%x\n", __func__, u32temp);
/* return 1; */
}
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP1, 0x000bdef7);
@@ -760,7 +772,7 @@
* nes_init_csr_ne020
* Initialize registers for ne020 hardware
*/
-void nes_init_csr_ne020(struct nes_device *nesdev, u8 hw_rev, u8 port_count)
+static void nes_init_csr_ne020(struct nes_device *nesdev, u8 hw_rev, u8 port_count)
{
u32 u32temp;
@@ -1204,7 +1216,7 @@
if (nesadapter->OneG_Mode) {
nes_debug(NES_DBG_PHY, "1G PHY, mac_index = %d.\n", mac_index);
if (nesadapter->phy_type[mac_index] == NES_PHY_TYPE_1G) {
- printk(PFX "%s: Programming mdc config for 1G\n", __FUNCTION__);
+ printk(PFX "%s: Programming mdc config for 1G\n", __func__);
tx_config = nes_read_indexed(nesdev, NES_IDX_MAC_TX_CONFIG);
tx_config |= 0x04;
nes_write_indexed(nesdev, NES_IDX_MAC_TX_CONFIG, tx_config);
@@ -1358,7 +1370,7 @@
static void nes_rq_wqes_timeout(unsigned long parm)
{
struct nes_vnic *nesvnic = (struct nes_vnic *)parm;
- printk("%s: Timer fired.\n", __FUNCTION__);
+ printk("%s: Timer fired.\n", __func__);
atomic_set(&nesvnic->rx_skb_timer_running, 0);
if (atomic_read(&nesvnic->rx_skbs_needed))
nes_replenish_nic_rq(nesvnic);
@@ -1909,7 +1921,7 @@
/**
* nes_process_ceq
*/
-void nes_process_ceq(struct nes_device *nesdev, struct nes_hw_ceq *ceq)
+static void nes_process_ceq(struct nes_device *nesdev, struct nes_hw_ceq *ceq)
{
u64 u64temp;
struct nes_hw_cq *cq;
@@ -1949,7 +1961,7 @@
/**
* nes_process_aeq
*/
-void nes_process_aeq(struct nes_device *nesdev, struct nes_hw_aeq *aeq)
+static void nes_process_aeq(struct nes_device *nesdev, struct nes_hw_aeq *aeq)
{
// u64 u64temp;
u32 head;
@@ -2060,7 +2072,7 @@
/**
* nes_process_mac_intr
*/
-void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number)
+static void nes_process_mac_intr(struct nes_device *nesdev, u32 mac_number)
{
unsigned long flags;
u32 pcs_control_status;
@@ -2163,7 +2175,7 @@
temp_phy_data = phy_data;
} while (1);
nes_debug(NES_DBG_PHY, "%s: Phy data = 0x%04X, link was %s.\n",
- __FUNCTION__, phy_data, nesadapter->mac_link_down ? "DOWN" : "UP");
+ __func__, phy_data, nesadapter->mac_link_down ? "DOWN" : "UP");
} else {
phy_data = (0x0f0f0000 == (pcs_control_status & 0x0f1f0000)) ? 4 : 0;
@@ -2205,7 +2217,7 @@
-void nes_nic_napi_ce_handler(struct nes_device *nesdev, struct nes_hw_nic_cq *cq)
+static void nes_nic_napi_ce_handler(struct nes_device *nesdev, struct nes_hw_nic_cq *cq)
{
struct nes_vnic *nesvnic = container_of(cq, struct nes_vnic, nic_cq);
@@ -2428,7 +2440,7 @@
/**
* nes_cqp_ce_handler
*/
-void nes_cqp_ce_handler(struct nes_device *nesdev, struct nes_hw_cq *cq)
+static void nes_cqp_ce_handler(struct nes_device *nesdev, struct nes_hw_cq *cq)
{
u64 u64temp;
unsigned long flags;
@@ -2567,7 +2579,8 @@
/**
* nes_process_iwarp_aeqe
*/
-void nes_process_iwarp_aeqe(struct nes_device *nesdev, struct nes_hw_aeqe *aeqe)
+static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
+ struct nes_hw_aeqe *aeqe)
{
u64 context;
u64 aeqe_context = 0;
@@ -2819,7 +2832,7 @@
le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX]));
if (resource_allocated) {
printk(KERN_ERR PFX "%s: Processing an NES_AEQE_AEID_CQ_OPERATION_ERROR event on CQ%u\n",
- __FUNCTION__, le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX]));
+ __func__, le32_to_cpu(aeqe->aeqe_words[NES_AEQE_COMP_QP_CQ_ID_IDX]));
}
break;
case NES_AEQE_AEID_DDP_UBE_DDP_MESSAGE_TOO_LONG_FOR_AVAILABLE_BUFFER:
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index eee77da..34166641 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -802,7 +802,7 @@
memcpy(netdev->dev_addr, mac_addr->sa_data, netdev->addr_len);
printk(PFX "%s: Address length = %d, Address = %02X%02X%02X%02X%02X%02X..\n",
- __FUNCTION__, netdev->addr_len,
+ __func__, netdev->addr_len,
mac_addr->sa_data[0], mac_addr->sa_data[1],
mac_addr->sa_data[2], mac_addr->sa_data[3],
mac_addr->sa_data[4], mac_addr->sa_data[5]);
@@ -832,7 +832,7 @@
/**
* nes_netdev_set_multicast_list
*/
-void nes_netdev_set_multicast_list(struct net_device *netdev)
+static void nes_netdev_set_multicast_list(struct net_device *netdev)
{
struct nes_vnic *nesvnic = netdev_priv(netdev);
struct nes_device *nesdev = nesvnic->nesdev;
@@ -947,28 +947,6 @@
return ret;
}
-
-/**
- * nes_netdev_exit - destroy network device
- */
-void nes_netdev_exit(struct nes_vnic *nesvnic)
-{
- struct net_device *netdev = nesvnic->netdev;
- struct nes_ib_device *nesibdev = nesvnic->nesibdev;
-
- nes_debug(NES_DBG_SHUTDOWN, "\n");
-
- // destroy the ibdevice if RDMA enabled
- if ((nesvnic->rdma_enabled)&&(nesvnic->of_device_registered)) {
- nes_destroy_ofa_device( nesibdev );
- nesvnic->of_device_registered = 0;
- nesvnic->nesibdev = NULL;
- }
- unregister_netdev(netdev);
- nes_debug(NES_DBG_SHUTDOWN, "\n");
-}
-
-
#define NES_ETHTOOL_STAT_COUNT 55
static const char nes_ethtool_stringset[NES_ETHTOOL_STAT_COUNT][ETH_GSTRING_LEN] = {
"Link Change Interrupts",
diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c
index c4ec6ac..f9db07c 100644
--- a/drivers/infiniband/hw/nes/nes_utils.c
+++ b/drivers/infiniband/hw/nes/nes_utils.c
@@ -566,7 +566,7 @@
cqp_request);
} else
printk(KERN_ERR PFX "%s: Could not allocated a CQP request.\n",
- __FUNCTION__);
+ __func__);
return cqp_request;
}
diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c
index a651e9d..7c27420 100644
--- a/drivers/infiniband/hw/nes/nes_verbs.c
+++ b/drivers/infiniband/hw/nes/nes_verbs.c
@@ -49,6 +49,7 @@
atomic_t qps_created;
atomic_t sw_qps_destroyed;
+static void nes_unregister_ofa_device(struct nes_ib_device *nesibdev);
/**
* nes_alloc_mw
@@ -1043,10 +1044,10 @@
u8 sq_pbl_entries;
pbl_entries = nespbl->pbl_size >> 3;
- nes_debug(NES_DBG_QP, "Userspace PBL, pbl_size=%u, pbl_entries = %d pbl_vbase=%p, pbl_pbase=%p\n",
+ nes_debug(NES_DBG_QP, "Userspace PBL, pbl_size=%u, pbl_entries = %d pbl_vbase=%p, pbl_pbase=%lx\n",
nespbl->pbl_size, pbl_entries,
(void *)nespbl->pbl_vbase,
- (void *)nespbl->pbl_pbase);
+ (unsigned long) nespbl->pbl_pbase);
pbl = (__le64 *) nespbl->pbl_vbase; /* points to first pbl entry */
/* now lets set the sq_vbase as well as rq_vbase addrs we will assign */
/* the first pbl to be fro the rq_vbase... */
@@ -1074,9 +1075,9 @@
/* nesqp->hwqp.rq_vbase = bus_to_virt(*pbl); */
/*nesqp->hwqp.rq_vbase = phys_to_virt(*pbl); */
- nes_debug(NES_DBG_QP, "QP sq_vbase= %p sq_pbase=%p rq_vbase=%p rq_pbase=%p\n",
- nesqp->hwqp.sq_vbase, (void *)nesqp->hwqp.sq_pbase,
- nesqp->hwqp.rq_vbase, (void *)nesqp->hwqp.rq_pbase);
+ nes_debug(NES_DBG_QP, "QP sq_vbase= %p sq_pbase=%lx rq_vbase=%p rq_pbase=%lx\n",
+ nesqp->hwqp.sq_vbase, (unsigned long) nesqp->hwqp.sq_pbase,
+ nesqp->hwqp.rq_vbase, (unsigned long) nesqp->hwqp.rq_pbase);
spin_lock_irqsave(&nesadapter->pbl_lock, flags);
if (!nesadapter->free_256pbl) {
pci_free_consistent(nesdev->pcidev, nespbl->pbl_size, nespbl->pbl_vbase,
@@ -1251,6 +1252,9 @@
u8 rq_encoded_size;
/* int counter; */
+ if (init_attr->create_flags)
+ return ERR_PTR(-EINVAL);
+
atomic_inc(&qps_created);
switch (init_attr->qp_type) {
case IB_QPT_RC:
@@ -1908,13 +1912,13 @@
nesadapter->free_256pbl++;
if (nesadapter->free_256pbl > nesadapter->max_256pbl) {
printk(KERN_ERR PFX "%s: free 256B PBLs(%u) has exceeded the max(%u)\n",
- __FUNCTION__, nesadapter->free_256pbl, nesadapter->max_256pbl);
+ __func__, nesadapter->free_256pbl, nesadapter->max_256pbl);
}
} else if (nescq->virtual_cq == 2) {
nesadapter->free_4kpbl++;
if (nesadapter->free_4kpbl > nesadapter->max_4kpbl) {
printk(KERN_ERR PFX "%s: free 4K PBLs(%u) has exceeded the max(%u)\n",
- __FUNCTION__, nesadapter->free_4kpbl, nesadapter->max_4kpbl);
+ __func__, nesadapter->free_4kpbl, nesadapter->max_4kpbl);
}
opcode |= NES_CQP_CQ_4KB_CHUNK;
}
@@ -2653,10 +2657,10 @@
nespbl->pbl_vbase = (u64 *)pbl;
nespbl->user_base = start;
- nes_debug(NES_DBG_MR, "Allocated PBL memory, %u bytes, pbl_pbase=%p,"
+ nes_debug(NES_DBG_MR, "Allocated PBL memory, %u bytes, pbl_pbase=%lx,"
" pbl_vbase=%p user_base=0x%lx\n",
- nespbl->pbl_size, (void *)nespbl->pbl_pbase,
- (void*)nespbl->pbl_vbase, nespbl->user_base);
+ nespbl->pbl_size, (unsigned long) nespbl->pbl_pbase,
+ (void *) nespbl->pbl_vbase, nespbl->user_base);
list_for_each_entry(chunk, ®ion->chunk_list, list) {
for (nmap_index = 0; nmap_index < chunk->nmap; ++nmap_index) {
@@ -3895,14 +3899,11 @@
/**
* nes_unregister_ofa_device
*/
-void nes_unregister_ofa_device(struct nes_ib_device *nesibdev)
+static void nes_unregister_ofa_device(struct nes_ib_device *nesibdev)
{
struct nes_vnic *nesvnic = nesibdev->nesvnic;
int i;
- if (nesibdev == NULL)
- return;
-
for (i = 0; i < ARRAY_SIZE(nes_class_attributes); ++i) {
class_device_remove_file(&nesibdev->ibdev.class_dev, nes_class_attributes[i]);
}
diff --git a/drivers/infiniband/ulp/ipoib/Makefile b/drivers/infiniband/ulp/ipoib/Makefile
index 98ee38e..3090100 100644
--- a/drivers/infiniband/ulp/ipoib/Makefile
+++ b/drivers/infiniband/ulp/ipoib/Makefile
@@ -4,7 +4,8 @@
ipoib_ib.o \
ipoib_multicast.o \
ipoib_verbs.o \
- ipoib_vlan.o
+ ipoib_vlan.o \
+ ipoib_ethtool.o
ib_ipoib-$(CONFIG_INFINIBAND_IPOIB_CM) += ipoib_cm.o
ib_ipoib-$(CONFIG_INFINIBAND_IPOIB_DEBUG) += ipoib_fs.o
diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h
index 054fab8..73b2b17 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib.h
+++ b/drivers/infiniband/ulp/ipoib/ipoib.h
@@ -87,6 +87,7 @@
IPOIB_MCAST_STARTED = 8,
IPOIB_FLAG_ADMIN_CM = 9,
IPOIB_FLAG_UMCAST = 10,
+ IPOIB_FLAG_CSUM = 11,
IPOIB_MAX_BACKOFF_SECONDS = 16,
@@ -241,6 +242,11 @@
int num_frags;
};
+struct ipoib_ethtool_st {
+ u16 coalesce_usecs;
+ u16 max_coalesced_frames;
+};
+
/*
* Device private locking: tx_lock protects members used in TX fast
* path (and we use LLTX so upper layers don't do extra locking).
@@ -318,6 +324,8 @@
struct dentry *mcg_dentry;
struct dentry *path_dentry;
#endif
+ int hca_caps;
+ struct ipoib_ethtool_st ethtool;
};
struct ipoib_ah {
@@ -458,6 +466,8 @@
int ipoib_pkey_dev_delay_open(struct net_device *dev);
void ipoib_drain_cq(struct net_device *dev);
+void ipoib_set_ethtool_ops(struct net_device *dev);
+
#ifdef CONFIG_INFINIBAND_IPOIB_CM
#define IPOIB_FLAGS_RC 0x80
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 2490b2d..9db7b0b 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -1007,9 +1007,9 @@
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ib_qp_attr qp_attr;
int qp_attr_mask, ret;
- ret = ib_find_cached_pkey(priv->ca, priv->port, priv->pkey, &qp_attr.pkey_index);
+ ret = ib_find_pkey(priv->ca, priv->port, priv->pkey, &qp_attr.pkey_index);
if (ret) {
- ipoib_warn(priv, "pkey 0x%x not in cache: %d\n", priv->pkey, ret);
+ ipoib_warn(priv, "pkey 0x%x not found: %d\n", priv->pkey, ret);
return ret;
}
@@ -1383,6 +1383,10 @@
set_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
ipoib_warn(priv, "enabling connected mode "
"will cause multicast packet drops\n");
+
+ dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO);
+ priv->tx_wr.send_flags &= ~IB_SEND_IP_CSUM;
+
ipoib_flush_paths(dev);
return count;
}
@@ -1391,6 +1395,13 @@
clear_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags);
dev->mtu = min(priv->mcast_mtu, dev->mtu);
ipoib_flush_paths(dev);
+
+ if (test_bit(IPOIB_FLAG_CSUM, &priv->flags)) {
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+ if (priv->hca_caps & IB_DEVICE_UD_TSO)
+ dev->features |= NETIF_F_TSO;
+ }
+
return count;
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
new file mode 100644
index 0000000..9a47428
--- /dev/null
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+
+#include "ipoib.h"
+
+static void ipoib_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ strncpy(drvinfo->driver, "ipoib", sizeof(drvinfo->driver) - 1);
+}
+
+static int ipoib_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *coal)
+{
+ struct ipoib_dev_priv *priv = netdev_priv(dev);
+
+ coal->rx_coalesce_usecs = priv->ethtool.coalesce_usecs;
+ coal->tx_coalesce_usecs = priv->ethtool.coalesce_usecs;
+ coal->rx_max_coalesced_frames = priv->ethtool.max_coalesced_frames;
+ coal->tx_max_coalesced_frames = priv->ethtool.max_coalesced_frames;
+
+ return 0;
+}
+
+static int ipoib_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *coal)
+{
+ struct ipoib_dev_priv *priv = netdev_priv(dev);
+ int ret;
+
+ /*
+ * Since IPoIB uses a single CQ for both rx and tx, we assume
+ * that rx params dictate the configuration. These values are
+ * saved in the private data and returned when ipoib_get_coalesce()
+ * is called.
+ */
+ if (coal->rx_coalesce_usecs > 0xffff ||
+ coal->rx_max_coalesced_frames > 0xffff)
+ return -EINVAL;
+
+ ret = ib_modify_cq(priv->cq, coal->rx_max_coalesced_frames,
+ coal->rx_coalesce_usecs);
+ if (ret && ret != -ENOSYS) {
+ ipoib_warn(priv, "failed modifying CQ (%d)\n", ret);
+ return ret;
+ }
+
+ coal->tx_coalesce_usecs = coal->rx_coalesce_usecs;
+ coal->tx_max_coalesced_frames = coal->rx_max_coalesced_frames;
+ priv->ethtool.coalesce_usecs = coal->rx_coalesce_usecs;
+ priv->ethtool.max_coalesced_frames = coal->rx_max_coalesced_frames;
+
+ return 0;
+}
+
+static const struct ethtool_ops ipoib_ethtool_ops = {
+ .get_drvinfo = ipoib_get_drvinfo,
+ .get_tso = ethtool_op_get_tso,
+ .get_coalesce = ipoib_get_coalesce,
+ .set_coalesce = ipoib_set_coalesce,
+};
+
+void ipoib_set_ethtool_ops(struct net_device *dev)
+{
+ SET_ETHTOOL_OPS(dev, &ipoib_ethtool_ops);
+}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index 08c4396..0205eb7 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -39,6 +39,8 @@
#include <linux/dma-mapping.h>
#include <rdma/ib_cache.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
#include "ipoib.h"
@@ -231,6 +233,10 @@
skb->dev = dev;
/* XXX get correct PACKET_ type here */
skb->pkt_type = PACKET_HOST;
+
+ if (test_bit(IPOIB_FLAG_CSUM, &priv->flags) && likely(wc->csum_ok))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
netif_receive_skb(skb);
repost:
@@ -245,29 +251,37 @@
struct sk_buff *skb = tx_req->skb;
u64 *mapping = tx_req->mapping;
int i;
+ int off;
- mapping[0] = ib_dma_map_single(ca, skb->data, skb_headlen(skb),
- DMA_TO_DEVICE);
- if (unlikely(ib_dma_mapping_error(ca, mapping[0])))
- return -EIO;
+ if (skb_headlen(skb)) {
+ mapping[0] = ib_dma_map_single(ca, skb->data, skb_headlen(skb),
+ DMA_TO_DEVICE);
+ if (unlikely(ib_dma_mapping_error(ca, mapping[0])))
+ return -EIO;
+
+ off = 1;
+ } else
+ off = 0;
for (i = 0; i < skb_shinfo(skb)->nr_frags; ++i) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- mapping[i + 1] = ib_dma_map_page(ca, frag->page,
+ mapping[i + off] = ib_dma_map_page(ca, frag->page,
frag->page_offset, frag->size,
DMA_TO_DEVICE);
- if (unlikely(ib_dma_mapping_error(ca, mapping[i + 1])))
+ if (unlikely(ib_dma_mapping_error(ca, mapping[i + off])))
goto partial_error;
}
return 0;
partial_error:
- ib_dma_unmap_single(ca, mapping[0], skb_headlen(skb), DMA_TO_DEVICE);
-
for (; i > 0; --i) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
- ib_dma_unmap_page(ca, mapping[i], frag->size, DMA_TO_DEVICE);
+ ib_dma_unmap_page(ca, mapping[i - !off], frag->size, DMA_TO_DEVICE);
}
+
+ if (off)
+ ib_dma_unmap_single(ca, mapping[0], skb_headlen(skb), DMA_TO_DEVICE);
+
return -EIO;
}
@@ -277,12 +291,17 @@
struct sk_buff *skb = tx_req->skb;
u64 *mapping = tx_req->mapping;
int i;
+ int off;
- ib_dma_unmap_single(ca, mapping[0], skb_headlen(skb), DMA_TO_DEVICE);
+ if (skb_headlen(skb)) {
+ ib_dma_unmap_single(ca, mapping[0], skb_headlen(skb), DMA_TO_DEVICE);
+ off = 1;
+ } else
+ off = 0;
for (i = 0; i < skb_shinfo(skb)->nr_frags; ++i) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- ib_dma_unmap_page(ca, mapping[i + 1], frag->size,
+ ib_dma_unmap_page(ca, mapping[i + off], frag->size,
DMA_TO_DEVICE);
}
}
@@ -388,24 +407,40 @@
static inline int post_send(struct ipoib_dev_priv *priv,
unsigned int wr_id,
struct ib_ah *address, u32 qpn,
- u64 *mapping, int headlen,
- skb_frag_t *frags,
- int nr_frags)
+ struct ipoib_tx_buf *tx_req,
+ void *head, int hlen)
{
struct ib_send_wr *bad_wr;
- int i;
+ int i, off;
+ struct sk_buff *skb = tx_req->skb;
+ skb_frag_t *frags = skb_shinfo(skb)->frags;
+ int nr_frags = skb_shinfo(skb)->nr_frags;
+ u64 *mapping = tx_req->mapping;
- priv->tx_sge[0].addr = mapping[0];
- priv->tx_sge[0].length = headlen;
+ if (skb_headlen(skb)) {
+ priv->tx_sge[0].addr = mapping[0];
+ priv->tx_sge[0].length = skb_headlen(skb);
+ off = 1;
+ } else
+ off = 0;
+
for (i = 0; i < nr_frags; ++i) {
- priv->tx_sge[i + 1].addr = mapping[i + 1];
- priv->tx_sge[i + 1].length = frags[i].size;
+ priv->tx_sge[i + off].addr = mapping[i + off];
+ priv->tx_sge[i + off].length = frags[i].size;
}
- priv->tx_wr.num_sge = nr_frags + 1;
+ priv->tx_wr.num_sge = nr_frags + off;
priv->tx_wr.wr_id = wr_id;
priv->tx_wr.wr.ud.remote_qpn = qpn;
priv->tx_wr.wr.ud.ah = address;
+ if (head) {
+ priv->tx_wr.wr.ud.mss = skb_shinfo(skb)->gso_size;
+ priv->tx_wr.wr.ud.header = head;
+ priv->tx_wr.wr.ud.hlen = hlen;
+ priv->tx_wr.opcode = IB_WR_LSO;
+ } else
+ priv->tx_wr.opcode = IB_WR_SEND;
+
return ib_post_send(priv->qp, &priv->tx_wr, &bad_wr);
}
@@ -414,14 +449,30 @@
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct ipoib_tx_buf *tx_req;
+ int hlen;
+ void *phead;
- if (unlikely(skb->len > priv->mcast_mtu + IPOIB_ENCAP_LEN)) {
- ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
- skb->len, priv->mcast_mtu + IPOIB_ENCAP_LEN);
- ++dev->stats.tx_dropped;
- ++dev->stats.tx_errors;
- ipoib_cm_skb_too_long(dev, skb, priv->mcast_mtu);
- return;
+ if (skb_is_gso(skb)) {
+ hlen = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ phead = skb->data;
+ if (unlikely(!skb_pull(skb, hlen))) {
+ ipoib_warn(priv, "linear data too small\n");
+ ++dev->stats.tx_dropped;
+ ++dev->stats.tx_errors;
+ dev_kfree_skb_any(skb);
+ return;
+ }
+ } else {
+ if (unlikely(skb->len > priv->mcast_mtu + IPOIB_ENCAP_LEN)) {
+ ipoib_warn(priv, "packet len %d (> %d) too long to send, dropping\n",
+ skb->len, priv->mcast_mtu + IPOIB_ENCAP_LEN);
+ ++dev->stats.tx_dropped;
+ ++dev->stats.tx_errors;
+ ipoib_cm_skb_too_long(dev, skb, priv->mcast_mtu);
+ return;
+ }
+ phead = NULL;
+ hlen = 0;
}
ipoib_dbg_data(priv, "sending packet, length=%d address=%p qpn=0x%06x\n",
@@ -442,10 +493,13 @@
return;
}
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ priv->tx_wr.send_flags |= IB_SEND_IP_CSUM;
+ else
+ priv->tx_wr.send_flags &= ~IB_SEND_IP_CSUM;
+
if (unlikely(post_send(priv, priv->tx_head & (ipoib_sendq_size - 1),
- address->ah, qpn,
- tx_req->mapping, skb_headlen(skb),
- skb_shinfo(skb)->frags, skb_shinfo(skb)->nr_frags))) {
+ address->ah, qpn, tx_req, phead, hlen))) {
ipoib_warn(priv, "post_send failed\n");
++dev->stats.tx_errors;
ipoib_dma_unmap_tx(priv->ca, tx_req);
@@ -540,7 +594,7 @@
struct ipoib_dev_priv *priv = netdev_priv(dev);
u16 pkey_index = 0;
- if (ib_find_cached_pkey(priv->ca, priv->port, priv->pkey, &pkey_index))
+ if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &pkey_index))
clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
else
set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
@@ -781,13 +835,13 @@
clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
ipoib_ib_dev_down(dev, 0);
ipoib_ib_dev_stop(dev, 0);
- ipoib_pkey_dev_delay_open(dev);
- return;
+ if (ipoib_pkey_dev_delay_open(dev))
+ return;
}
- set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags);
/* restart QP only if P_Key index is changed */
- if (new_index == priv->pkey_index) {
+ if (test_and_set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags) &&
+ new_index == priv->pkey_index) {
ipoib_dbg(priv, "Not flushing - P_Key index not changed.\n");
return;
}
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 5728204..bd07f02 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -359,8 +359,7 @@
spin_lock_irq(&priv->tx_lock);
spin_lock(&priv->lock);
- list_splice(&priv->path_list, &remove_list);
- INIT_LIST_HEAD(&priv->path_list);
+ list_splice_init(&priv->path_list, &remove_list);
list_for_each_entry(path, &remove_list, list)
rb_erase(&path->rb_node, &priv->path_tree);
@@ -952,6 +951,8 @@
dev->set_multicast_list = ipoib_set_mcast_list;
dev->neigh_setup = ipoib_neigh_setup_dev;
+ ipoib_set_ethtool_ops(dev);
+
netif_napi_add(dev, &priv->napi, ipoib_poll, 100);
dev->watchdog_timeo = HZ;
@@ -1105,6 +1106,7 @@
struct ib_device *hca, u8 port)
{
struct ipoib_dev_priv *priv;
+ struct ib_device_attr *device_attr;
int result = -ENOMEM;
priv = ipoib_intf_alloc(format);
@@ -1120,6 +1122,29 @@
goto device_init_failed;
}
+ device_attr = kmalloc(sizeof *device_attr, GFP_KERNEL);
+ if (!device_attr) {
+ printk(KERN_WARNING "%s: allocation of %zu bytes failed\n",
+ hca->name, sizeof *device_attr);
+ goto device_init_failed;
+ }
+
+ result = ib_query_device(hca, device_attr);
+ if (result) {
+ printk(KERN_WARNING "%s: ib_query_device failed (ret = %d)\n",
+ hca->name, result);
+ kfree(device_attr);
+ goto device_init_failed;
+ }
+ priv->hca_caps = device_attr->device_cap_flags;
+
+ kfree(device_attr);
+
+ if (priv->hca_caps & IB_DEVICE_UD_IP_CSUM) {
+ set_bit(IPOIB_FLAG_CSUM, &priv->flags);
+ priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+ }
+
/*
* Set the full membership bit, so that we join the right
* broadcast group, etc.
@@ -1137,7 +1162,6 @@
} else
memcpy(priv->dev->dev_addr + 4, priv->local_gid.raw, sizeof (union ib_gid));
-
result = ipoib_dev_init(priv->dev, hca, port);
if (result < 0) {
printk(KERN_WARNING "%s: failed to initialize port %d (ret = %d)\n",
@@ -1155,6 +1179,9 @@
goto event_failed;
}
+ if (priv->dev->features & NETIF_F_SG && priv->hca_caps & IB_DEVICE_UD_TSO)
+ priv->dev->features |= NETIF_F_TSO;
+
result = register_netdev(priv->dev);
if (result) {
printk(KERN_WARNING "%s: couldn't register ipoib port %d; error %d\n",
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
index a3aeb91..8a20e37 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c
@@ -192,6 +192,9 @@
init_attr.send_cq = priv->cq;
init_attr.recv_cq = priv->cq;
+ if (priv->hca_caps & IB_DEVICE_UD_TSO)
+ init_attr.create_flags = IB_QP_CREATE_IPOIB_UD_LSO;
+
if (dev->features & NETIF_F_SG)
init_attr.cap.max_send_sge = MAX_SKB_FRAGS + 1;
diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c
index 83247f1..08dc81c 100644
--- a/drivers/infiniband/ulp/iser/iser_initiator.c
+++ b/drivers/infiniband/ulp/iser/iser_initiator.c
@@ -405,7 +405,7 @@
struct iser_dto *send_dto = NULL;
unsigned long buf_offset;
unsigned long data_seg_len;
- unsigned int itt;
+ uint32_t itt;
int err = 0;
if (!iser_conn_state_comp(iser_conn->ib_conn, ISER_CONN_UP)) {
@@ -416,7 +416,7 @@
if (iser_check_xmit(conn, ctask))
return -ENOBUFS;
- itt = ntohl(hdr->itt);
+ itt = (__force uint32_t)hdr->itt;
data_seg_len = ntoh24(hdr->dlength);
buf_offset = ntohl(hdr->offset);
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index 993f0a8..d19cfe6 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -473,11 +473,8 @@
iser_connect_error(cma_id);
break;
case RDMA_CM_EVENT_DISCONNECTED:
- iser_disconnected_handler(cma_id);
- break;
case RDMA_CM_EVENT_DEVICE_REMOVAL:
- iser_err("Device removal is currently unsupported\n");
- BUG();
+ iser_disconnected_handler(cma_id);
break;
default:
iser_err("Unexpected RDMA CM event (%d)\n", event->event);
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index fd4a49f..125765a 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -68,7 +68,7 @@
module_param(srp_sg_tablesize, int, 0444);
MODULE_PARM_DESC(srp_sg_tablesize,
- "Max number of gather/scatter entries per I/O (default is 12)");
+ "Max number of gather/scatter entries per I/O (default is 12, max 255)");
static int topspin_workarounds = 1;
@@ -2138,6 +2138,11 @@
{
int ret;
+ if (srp_sg_tablesize > 255) {
+ printk(KERN_WARNING PFX "Clamping srp_sg_tablesize to 255\n");
+ srp_sg_tablesize = 255;
+ }
+
ib_srp_transport_template =
srp_attach_transport(&ib_srp_transport_functions);
if (!ib_srp_transport_template)
diff --git a/drivers/input/apm-power.c b/drivers/input/apm-power.c
index c36d110..7d61a96 100644
--- a/drivers/input/apm-power.c
+++ b/drivers/input/apm-power.c
@@ -63,8 +63,6 @@
handle->handler = handler;
handle->name = "apm-power";
- handler->private = handle;
-
error = input_register_handle(handle);
if (error) {
printk(KERN_ERR
@@ -87,11 +85,10 @@
return 0;
}
-static void apmpower_disconnect(struct input_handle *handler)
+static void apmpower_disconnect(struct input_handle *handle)
{
- struct input_handle *handle = handler->private;
-
input_close_device(handle);
+ input_unregister_handle(handle);
kfree(handle);
}
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 99562ce..b32984b 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -124,6 +124,7 @@
{
struct evdev *evdev = container_of(dev, struct evdev, dev);
+ input_put_device(evdev->handle.dev);
kfree(evdev);
}
@@ -853,9 +854,6 @@
evdev_hangup(evdev);
evdev_remove_chrdev(evdev);
- if (evdev->grab)
- evdev_ungrab(evdev, evdev->grab);
-
/* evdev is marked dead so no one else accesses evdev->open */
if (evdev->open) {
input_flush_device(handle, NULL);
@@ -896,7 +894,7 @@
evdev->exist = 1;
evdev->minor = minor;
- evdev->handle.dev = dev;
+ evdev->handle.dev = input_get_device(dev);
evdev->handle.name = evdev->name;
evdev->handle.handler = handler;
evdev->handle.private = evdev;
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 22b2789..65d7077 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -171,6 +171,7 @@
{
struct joydev *joydev = container_of(dev, struct joydev, dev);
+ input_put_device(joydev->handle.dev);
kfree(joydev);
}
@@ -750,7 +751,7 @@
joydev->minor = minor;
joydev->exist = 1;
- joydev->handle.dev = dev;
+ joydev->handle.dev = input_get_device(dev);
joydev->handle.name = joydev->name;
joydev->handle.handler = handler;
joydev->handle.private = joydev;
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 6224c2f..4e651c1 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -50,9 +50,9 @@
#define KPKDI 0x0048
/* bit definitions */
-#define KPC_MKRN(n) ((((n) & 0x7) - 1) << 26) /* matrix key row number */
-#define KPC_MKCN(n) ((((n) & 0x7) - 1) << 23) /* matrix key column number */
-#define KPC_DKN(n) ((((n) & 0x7) - 1) << 6) /* direct key number */
+#define KPC_MKRN(n) ((((n) - 1) & 0x7) << 26) /* matrix key row number */
+#define KPC_MKCN(n) ((((n) - 1) & 0x7) << 23) /* matrix key column number */
+#define KPC_DKN(n) ((((n) - 1) & 0x7) << 6) /* direct key number */
#define KPC_AS (0x1 << 30) /* Automatic Scan bit */
#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index b4423a4..8dd3942 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -62,6 +62,10 @@
#define GEYSER4_ISO_PRODUCT_ID 0x021B
#define GEYSER4_JIS_PRODUCT_ID 0x021C
+#define GEYSER4_HF_ANSI_PRODUCT_ID 0x0229
+#define GEYSER4_HF_ISO_PRODUCT_ID 0x022A
+#define GEYSER4_HF_JIS_PRODUCT_ID 0x022B
+
#define ATP_DEVICE(prod) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
USB_DEVICE_ID_MATCH_INT_CLASS | \
@@ -93,6 +97,10 @@
{ ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_HF_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_HF_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_HF_JIS_PRODUCT_ID) },
+
/* Terminating entry */
{ }
};
@@ -217,7 +225,10 @@
(productId == GEYSER3_JIS_PRODUCT_ID) ||
(productId == GEYSER4_ANSI_PRODUCT_ID) ||
(productId == GEYSER4_ISO_PRODUCT_ID) ||
- (productId == GEYSER4_JIS_PRODUCT_ID);
+ (productId == GEYSER4_JIS_PRODUCT_ID) ||
+ (productId == GEYSER4_HF_ANSI_PRODUCT_ID) ||
+ (productId == GEYSER4_HF_ISO_PRODUCT_ID) ||
+ (productId == GEYSER4_HF_JIS_PRODUCT_ID);
}
/*
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index bbbe5e8..b989748 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -414,6 +414,7 @@
{
struct mousedev *mousedev = container_of(dev, struct mousedev, dev);
+ input_put_device(mousedev->handle.dev);
kfree(mousedev);
}
@@ -865,7 +866,7 @@
mousedev->minor = minor;
mousedev->exist = 1;
- mousedev->handle.dev = dev;
+ mousedev->handle.dev = input_get_device(dev);
mousedev->handle.name = mousedev->name;
mousedev->handle.handler = handler;
mousedev->handle.private = mousedev;
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index ced83c2..ef1a300 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -2010,6 +2010,7 @@
ndev->flags = IFF_NOARP|IFF_POINTOPOINT;
ndev->type = ARPHRD_ETHER;
ndev->addr_len = ETH_ALEN;
+ ndev->validate_addr = NULL;
/* for clients with MPPP maybe higher values better */
ndev->tx_queue_len = 30;
diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c
index 9e30774..c37bb0d 100644
--- a/drivers/leds/leds-ams-delta.c
+++ b/drivers/leds/leds-ams-delta.c
@@ -140,6 +140,7 @@
.resume = ams_delta_led_resume,
.driver = {
.name = "ams-delta-led",
+ .owner = THIS_MODULE,
},
};
@@ -159,3 +160,4 @@
MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>");
MODULE_DESCRIPTION("Amstrad Delta LED driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ams-delta-led");
diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
index af61f55..28db6c1 100644
--- a/drivers/leds/leds-atmel-pwm.c
+++ b/drivers/leds/leds-atmel-pwm.c
@@ -132,6 +132,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:leds-atmel-pwm");
+
static struct platform_driver pwmled_driver = {
.driver = {
.name = "leds-atmel-pwm",
diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c
index 6c3d33b..5750b08 100644
--- a/drivers/leds/leds-clevo-mail.c
+++ b/drivers/leds/leds-clevo-mail.c
@@ -170,6 +170,7 @@
.resume = clevo_mail_led_resume,
.driver = {
.name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c
index 9aebef0..accc7ed 100644
--- a/drivers/leds/leds-cm-x270.c
+++ b/drivers/leds/leds-cm-x270.c
@@ -101,6 +101,7 @@
#endif
.driver = {
.name = "cm-x270-led",
+ .owner = THIS_MODULE,
},
};
@@ -120,3 +121,4 @@
MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
MODULE_DESCRIPTION("CM-x270 LED driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cm-x270-led");
diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c
index d2b54b5..096881a 100644
--- a/drivers/leds/leds-cobalt-qube.c
+++ b/drivers/leds/leds-cobalt-qube.c
@@ -75,6 +75,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:cobalt-qube-leds");
+
static struct platform_driver cobalt_qube_led_driver = {
.probe = cobalt_qube_led_probe,
.remove = __devexit_p(cobalt_qube_led_remove),
diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c
index e45f6c4..29e931f 100644
--- a/drivers/leds/leds-corgi.c
+++ b/drivers/leds/leds-corgi.c
@@ -99,6 +99,7 @@
#endif
.driver = {
.name = "corgi-led",
+ .owner = THIS_MODULE,
},
};
@@ -118,3 +119,4 @@
MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
MODULE_DESCRIPTION("Corgi LED driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:corgi-led");
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 6c0a9c4..1aae8b3 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -49,13 +49,13 @@
if (led_dat->active_low)
level = !level;
- /* setting GPIOs with I2C/etc requires a preemptible task context */
+ /* Setting GPIOs with I2C/etc requires a task context, and we don't
+ * seem to have a reliable way to know if we're already in one; so
+ * let's just assume the worst.
+ */
if (led_dat->can_sleep) {
- if (preempt_count()) {
- led_dat->new_level = level;
- schedule_work(&led_dat->work);
- } else
- gpio_set_value_cansleep(led_dat->gpio, level);
+ led_dat->new_level = level;
+ schedule_work(&led_dat->work);
} else
gpio_set_value(led_dat->gpio, level);
}
@@ -79,6 +79,10 @@
cur_led = &pdata->leds[i];
led_dat = &leds_data[i];
+ ret = gpio_request(cur_led->gpio, cur_led->name);
+ if (ret < 0)
+ goto err;
+
led_dat->cdev.name = cur_led->name;
led_dat->cdev.default_trigger = cur_led->default_trigger;
led_dat->gpio = cur_led->gpio;
@@ -87,10 +91,6 @@
led_dat->cdev.brightness_set = gpio_led_set;
led_dat->cdev.brightness = LED_OFF;
- ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
- if (ret < 0)
- goto err;
-
gpio_direction_output(led_dat->gpio, led_dat->active_low);
INIT_WORK(&led_dat->work, gpio_led_work);
@@ -199,3 +199,4 @@
MODULE_AUTHOR("Raphael Assenat <raph@8d.com>");
MODULE_DESCRIPTION("GPIO LED driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-gpio");
diff --git a/drivers/leds/leds-h1940.c b/drivers/leds/leds-h1940.c
index 677c993..6e51c9b 100644
--- a/drivers/leds/leds-h1940.c
+++ b/drivers/leds/leds-h1940.c
@@ -139,6 +139,7 @@
static struct platform_driver h1940leds_driver = {
.driver = {
.name = "h1940-leds",
+ .owner = THIS_MODULE,
},
.probe = h1940leds_probe,
.remove = h1940leds_remove,
@@ -161,3 +162,4 @@
MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
MODULE_DESCRIPTION("LED driver for the iPAQ H1940");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:h1940-leds");
diff --git a/drivers/leds/leds-hp6xx.c b/drivers/leds/leds-hp6xx.c
index 82d4ec3..870f5a3 100644
--- a/drivers/leds/leds-hp6xx.c
+++ b/drivers/leds/leds-hp6xx.c
@@ -90,6 +90,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:hp6xx-led");
+
static struct platform_driver hp6xxled_driver = {
.probe = hp6xxled_probe,
.remove = hp6xxled_remove,
@@ -99,6 +102,7 @@
#endif
.driver = {
.name = "hp6xx-led",
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index 0fd6407..0d10e11 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -160,3 +160,4 @@
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("S3C24XX LED driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c24xx_led");
diff --git a/drivers/leds/leds-spitz.c b/drivers/leds/leds-spitz.c
index 93e1012..87007cc 100644
--- a/drivers/leds/leds-spitz.c
+++ b/drivers/leds/leds-spitz.c
@@ -105,6 +105,7 @@
#endif
.driver = {
.name = "spitz-led",
+ .owner = THIS_MODULE,
},
};
@@ -124,3 +125,4 @@
MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
MODULE_DESCRIPTION("Spitz LED driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:spitz-led");
diff --git a/drivers/leds/leds-tosa.c b/drivers/leds/leds-tosa.c
index 9e0a188..7ebecc4 100644
--- a/drivers/leds/leds-tosa.c
+++ b/drivers/leds/leds-tosa.c
@@ -109,6 +109,7 @@
.resume = tosaled_resume,
.driver = {
.name = "tosa-led",
+ .owner = THIS_MODULE,
},
};
@@ -128,3 +129,4 @@
MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>");
MODULE_DESCRIPTION("Tosa LED driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tosa-led");
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index bd8a1d1..82add26 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -79,6 +79,7 @@
int sleeping;
struct semaphore lock;
#ifdef CONFIG_BLK_DEV_IDE_PMAC
+ ide_hwif_t *cd_port;
void __iomem *cd_base;
int cd_irq;
int cd_retry;
@@ -448,7 +449,7 @@
}
int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
- int irq, int index)
+ int irq, ide_hwif_t *hwif)
{
int i;
@@ -456,10 +457,11 @@
struct media_bay_info* bay = &media_bays[i];
if (bay->mdev && which_bay == bay->mdev->ofdev.node) {
- int timeout = 5000;
+ int timeout = 5000, index = hwif->index;
down(&bay->lock);
+ bay->cd_port = hwif;
bay->cd_base = (void __iomem *) base;
bay->cd_irq = irq;
@@ -551,15 +553,10 @@
bay->timer = 0;
bay->state = mb_up;
if (bay->cd_index < 0) {
- hw_regs_t hw;
-
printk("mediabay %d, registering IDE...\n", i);
pmu_suspend();
- ide_init_hwif_ports(&hw, (unsigned long) bay->cd_base, (unsigned long) 0, NULL);
- hw.irq = bay->cd_irq;
- hw.chipset = ide_pmac;
- bay->cd_index =
- ide_register_hw(&hw, NULL, NULL);
+ ide_port_scan(bay->cd_port);
+ bay->cd_index = bay->cd_port->index;
pmu_resume();
}
if (bay->cd_index == -1) {
@@ -589,7 +586,7 @@
if (bay->cd_index >= 0) {
printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
bay->cd_index);
- ide_unregister(bay->cd_index, 1, 1);
+ ide_port_unregister_devices(bay->cd_port);
bay->cd_index = -1;
}
if (bay->cd_retry) {
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c574cf5..b162b83 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2348,25 +2348,15 @@
static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh,
struct stripe_head_state *s, int disks)
{
- set_bit(STRIPE_HANDLE, &sh->state);
- /* Take one of the following actions:
- * 1/ start a check parity operation if (uptodate == disks)
- * 2/ finish a check parity operation and act on the result
- * 3/ skip to the writeback section if we previously
- * initiated a recovery operation
- */
- if (s->failed == 0 &&
- !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
- if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
- BUG_ON(s->uptodate != disks);
- clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
- sh->ops.count++;
- s->uptodate--;
- } else if (
- test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
- clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
- clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+ int canceled_check = 0;
+ set_bit(STRIPE_HANDLE, &sh->state);
+
+ /* complete a check operation */
+ if (test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
+ clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
+ clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+ if (s->failed == 0) {
if (sh->ops.zero_sum_result == 0)
/* parity is correct (on disc,
* not in buffer any more)
@@ -2391,7 +2381,8 @@
s->uptodate++;
}
}
- }
+ } else
+ canceled_check = 1; /* STRIPE_INSYNC is not set */
}
/* check if we can clear a parity disk reconstruct */
@@ -2404,12 +2395,28 @@
clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
}
- /* Wait for check parity and compute block operations to complete
- * before write-back
+ /* start a new check operation if there are no failures, the stripe is
+ * not insync, and a repair is not in flight
*/
- if (!test_bit(STRIPE_INSYNC, &sh->state) &&
- !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) &&
- !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) {
+ if (s->failed == 0 &&
+ !test_bit(STRIPE_INSYNC, &sh->state) &&
+ !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
+ if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
+ BUG_ON(s->uptodate != disks);
+ clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
+ sh->ops.count++;
+ s->uptodate--;
+ }
+ }
+
+ /* Wait for check parity and compute block operations to complete
+ * before write-back. If a failure occurred while the check operation
+ * was in flight we need to cycle this stripe through handle_stripe
+ * since the parity block may not be uptodate
+ */
+ if (!canceled_check && !test_bit(STRIPE_INSYNC, &sh->state) &&
+ !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) &&
+ !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) {
struct r5dev *dev;
/* either failed parity check, or recovery is happening */
if (s->failed == 0)
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index 8cf9135..7b8bb69 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -6,3 +6,6 @@
obj-y += video/
obj-$(CONFIG_VIDEO_DEV) += radio/
obj-$(CONFIG_DVB_CORE) += dvb/
+ifeq ($(CONFIG_DVB_CORE),)
+ obj-$(CONFIG_VIDEO_TUNER) += dvb/frontends/
+endif
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index 8194334..1a4d831 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -445,7 +445,7 @@
s5h1409_readreg(state, 0xe3) | 0x1100);
else
return s5h1409_writereg(state, 0xe3,
- s5h1409_readreg(state, 0xe3) & 0xeeff);
+ s5h1409_readreg(state, 0xe3) & 0xfeff);
}
static int s5h1409_sleep(struct dvb_frontend* fe, int enable)
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index 34e317c..57b9e3a 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -587,6 +587,8 @@
.vidioc_s_input = vidioc_s_input,
};
+#ifdef CONFIG_PNP
+
static struct pnp_device_id cadet_pnp_devices[] = {
/* ADS Cadet AM/FM Radio Card */
{.id = "MSM0c24", .driver_data = 0},
@@ -621,6 +623,10 @@
.remove = NULL,
};
+#else
+static struct pnp_driver cadet_pnp_driver;
+#endif
+
static int cadet_probe(void)
{
static int iovals[8]={0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e};
diff --git a/drivers/media/video/bt8xx/bt832.c b/drivers/media/video/bt8xx/bt832.c
index a518761..f92f06d 100644
--- a/drivers/media/video/bt8xx/bt832.c
+++ b/drivers/media/video/bt8xx/bt832.c
@@ -97,6 +97,11 @@
int rc;
buf=kmalloc(65,GFP_KERNEL);
+ if (!buf) {
+ v4l_err(&t->client,
+ "Unable to allocate memory. Detaching.\n");
+ return 0;
+ }
bt832_hexdump(i2c_client_s,buf);
if(buf[0x40] != 0x31) {
@@ -211,7 +216,12 @@
switch (cmd) {
case BT832_HEXDUMP: {
unsigned char *buf;
- buf=kmalloc(65,GFP_KERNEL);
+ buf = kmalloc(65, GFP_KERNEL);
+ if (!buf) {
+ v4l_err(&t->client,
+ "Unable to allocate memory\n");
+ break;
+ }
bt832_hexdump(&t->client,buf);
kfree(buf);
}
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index a080c14..fcf8f2d 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -1990,7 +1990,7 @@
if (0 != err)
return err;
- f->type = V4L2_TUNER_ANALOG_TV;
+ f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
f->frequency = btv->freq;
return 0;
@@ -2009,7 +2009,8 @@
if (unlikely(f->tuner != 0))
return -EINVAL;
- if (unlikely(f->type != V4L2_TUNER_ANALOG_TV))
+ if (unlikely(f->type != (btv->radio_user
+ ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV)))
return -EINVAL;
mutex_lock(&btv->lock);
btv->freq = f->frequency;
@@ -3415,6 +3416,7 @@
{
int minor = iminor(inode);
struct bttv *btv = NULL;
+ struct bttv_fh *fh;
unsigned int i;
dprintk("bttv: open minor=%d\n",minor);
@@ -3429,12 +3431,19 @@
return -ENODEV;
dprintk("bttv%d: open called (radio)\n",btv->c.nr);
+
+ /* allocate per filehandle data */
+ fh = kmalloc(sizeof(*fh), GFP_KERNEL);
+ if (NULL == fh)
+ return -ENOMEM;
+ file->private_data = fh;
+ *fh = btv->init;
+ v4l2_prio_open(&btv->prio, &fh->prio);
+
mutex_lock(&btv->lock);
btv->radio_user++;
- file->private_data = btv;
-
bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL);
audio_input(btv,TVAUDIO_INPUT_RADIO);
@@ -3444,7 +3453,8 @@
static int radio_release(struct inode *inode, struct file *file)
{
- struct bttv *btv = file->private_data;
+ struct bttv_fh *fh = file->private_data;
+ struct bttv *btv = fh->btv;
struct rds_command cmd;
btv->radio_user--;
@@ -3508,8 +3518,12 @@
static int radio_g_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
+ if (a->index != 0)
+ return -EINVAL;
+
memset(a, 0, sizeof(*a));
strcpy(a->name, "Radio");
+
return 0;
}
@@ -3569,7 +3583,8 @@
static ssize_t radio_read(struct file *file, char __user *data,
size_t count, loff_t *ppos)
{
- struct bttv *btv = file->private_data;
+ struct bttv_fh *fh = file->private_data;
+ struct bttv *btv = fh->btv;
struct rds_command cmd;
cmd.block_count = count/3;
cmd.buffer = data;
@@ -3583,7 +3598,8 @@
static unsigned int radio_poll(struct file *file, poll_table *wait)
{
- struct bttv *btv = file->private_data;
+ struct bttv_fh *fh = file->private_data;
+ struct bttv *btv = fh->btv;
struct rds_command cmd;
cmd.instance = file;
cmd.event_list = wait;
@@ -3599,6 +3615,7 @@
.open = radio_open,
.read = radio_read,
.release = radio_release,
+ .compat_ioctl = v4l_compat_ioctl32,
.ioctl = video_ioctl2,
.llseek = no_llseek,
.poll = radio_poll,
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 2d414da..dfa2698 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -232,6 +232,7 @@
case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
+ case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
break;
@@ -347,10 +348,13 @@
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+ if (dev->i2c_bus[0].i2c_rc == 0)
+ hauppauge_eeprom(dev, eeprom+0x80);
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
if (dev->i2c_bus[0].i2c_rc == 0)
- hauppauge_eeprom(dev, eeprom+0x80);
+ hauppauge_eeprom(dev, eeprom+0xc0);
break;
}
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 8e40c7b..7f10b27 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -56,137 +56,6 @@
#define NO_SYNC_LINE (-1U)
-/*
- * CX23885 Assumptions
- * 1 line = 16 bytes of CDT
- * cmds size = 80
- * cdt size = 16 * linesize
- * iqsize = 64
- * maxlines = 6
- *
- * Address Space:
- * 0x00000000 0x00008fff FIFO clusters
- * 0x00010000 0x000104af Channel Management Data Structures
- * 0x000104b0 0x000104ff Free
- * 0x00010500 0x000108bf 15 channels * iqsize
- * 0x000108c0 0x000108ff Free
- * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
- * 15 channels * (iqsize + (maxlines * linesize))
- * 0x00010ea0 0x00010xxx Free
- */
-
-static struct sram_channel cx23885_sram_channels[] = {
- [SRAM_CH01] = {
- .name = "VID A",
- .cmds_start = 0x10000,
- .ctrl_start = 0x105b0,
- .cdt = 0x107b0,
- .fifo_start = 0x40,
- .fifo_size = 0x2800,
- .ptr1_reg = DMA1_PTR1,
- .ptr2_reg = DMA1_PTR2,
- .cnt1_reg = DMA1_CNT1,
- .cnt2_reg = DMA1_CNT2,
- .jumponly = 1,
- },
- [SRAM_CH02] = {
- .name = "ch2",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA2_PTR1,
- .ptr2_reg = DMA2_PTR2,
- .cnt1_reg = DMA2_CNT1,
- .cnt2_reg = DMA2_CNT2,
- },
- [SRAM_CH03] = {
- .name = "TS1 B",
- .cmds_start = 0x100A0,
- .ctrl_start = 0x10630,
- .cdt = 0x10870,
- .fifo_start = 0x5000,
- .fifo_size = 0x1000,
- .ptr1_reg = DMA3_PTR1,
- .ptr2_reg = DMA3_PTR2,
- .cnt1_reg = DMA3_CNT1,
- .cnt2_reg = DMA3_CNT2,
- },
- [SRAM_CH04] = {
- .name = "ch4",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA4_PTR1,
- .ptr2_reg = DMA4_PTR2,
- .cnt1_reg = DMA4_CNT1,
- .cnt2_reg = DMA4_CNT2,
- },
- [SRAM_CH05] = {
- .name = "ch5",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA5_PTR1,
- .ptr2_reg = DMA5_PTR2,
- .cnt1_reg = DMA5_CNT1,
- .cnt2_reg = DMA5_CNT2,
- },
- [SRAM_CH06] = {
- .name = "TS2 C",
- .cmds_start = 0x10140,
- .ctrl_start = 0x10680,
- .cdt = 0x108d0,
- .fifo_start = 0x6000,
- .fifo_size = 0x1000,
- .ptr1_reg = DMA5_PTR1,
- .ptr2_reg = DMA5_PTR2,
- .cnt1_reg = DMA5_CNT1,
- .cnt2_reg = DMA5_CNT2,
- },
- [SRAM_CH07] = {
- .name = "ch7",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA6_PTR1,
- .ptr2_reg = DMA6_PTR2,
- .cnt1_reg = DMA6_CNT1,
- .cnt2_reg = DMA6_CNT2,
- },
- [SRAM_CH08] = {
- .name = "ch8",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA7_PTR1,
- .ptr2_reg = DMA7_PTR2,
- .cnt1_reg = DMA7_CNT1,
- .cnt2_reg = DMA7_CNT2,
- },
- [SRAM_CH09] = {
- .name = "ch9",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA8_PTR1,
- .ptr2_reg = DMA8_PTR2,
- .cnt1_reg = DMA8_CNT1,
- .cnt2_reg = DMA8_CNT2,
- },
-};
-
/* FIXME, these allocations will change when
* analog arrives. The be reviewed.
* CX23887 Assumptions
@@ -754,6 +623,7 @@
atomic_inc(&dev->refcount);
dev->nr = cx23885_devcount++;
+ dev->sram_channels = cx23887_sram_channels;
sprintf(dev->name, "cx23885[%d]", dev->nr);
mutex_lock(&devlist);
@@ -763,13 +633,11 @@
/* Configure the internal memory */
if(dev->pci->device == 0x8880) {
dev->bridge = CX23885_BRIDGE_887;
- dev->sram_channels = cx23887_sram_channels;
/* Apply a sensible clock frequency for the PCIe bridge */
dev->clk_freq = 25000000;
} else
if(dev->pci->device == 0x8852) {
dev->bridge = CX23885_BRIDGE_885;
- dev->sram_channels = cx23885_sram_channels;
/* Apply a sensible clock frequency for the PCIe bridge */
dev->clk_freq = 28000000;
} else
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index 4df6d6d..fe9991c 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -155,6 +155,41 @@
/*------------------------------------------------------------------------*/
+/* Hauppauge PVR-USB2 Model 73xxx */
+
+static const char *pvr2_client_73xxx[] = {
+ "cx25840",
+ "tuner",
+};
+
+static const char *pvr2_fw1_names_73xxx[] = {
+ "v4l-pvrusb2-73xxx-01.fw",
+};
+
+static const struct pvr2_device_desc pvr2_device_73xxx = {
+ .description = "WinTV PVR USB2 Model Category 73xxxx",
+ .shortname = "73xxx",
+ .client_modules.lst = pvr2_client_73xxx,
+ .client_modules.cnt = ARRAY_SIZE(pvr2_client_73xxx),
+ .fx2_firmware.lst = pvr2_fw1_names_73xxx,
+ .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx),
+ .flag_has_cx25840 = !0,
+ .flag_has_hauppauge_rom = !0,
+#if 0
+ .flag_has_analogtuner = !0,
+ .flag_has_composite = !0,
+ .flag_has_svideo = !0,
+ .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+ .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
+ .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+#else
+ .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+#endif
+};
+
+
+
+/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 75xxx */
static const char *pvr2_client_75xxx[] = {
@@ -198,8 +233,12 @@
{ USB_DEVICE(0x11ba, 0x1001),
.driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2},
#endif
+ { USB_DEVICE(0x2040, 0x7300),
+ .driver_info = (kernel_ulong_t)&pvr2_device_73xxx},
{ USB_DEVICE(0x2040, 0x7500),
.driver_info = (kernel_ulong_t)&pvr2_device_75xxx},
+ { USB_DEVICE(0x2040, 0x7501),
+ .driver_info = (kernel_ulong_t)&pvr2_device_75xxx},
{ }
};
diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c
index a545dca..0e45499 100644
--- a/drivers/media/video/v4l2-int-device.c
+++ b/drivers/media/video/v4l2-int-device.c
@@ -156,3 +156,5 @@
find_ioctl(d->u.slave, cmd,
(v4l2_int_ioctl_func *)no_such_ioctl_1))(d, arg);
}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 3b12f5d..bbc69fd 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -22,3 +22,4 @@
obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o
obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
+obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index 058ccac..e171650 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -154,6 +154,7 @@
.remove = __devexit_p(ssc_remove),
.driver = {
.name = "ssc",
+ .owner = THIS_MODULE,
},
};
@@ -172,3 +173,4 @@
MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ssc");
diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c
index f8d3b9a..0d5ce03 100644
--- a/drivers/misc/atmel_pwm.c
+++ b/drivers/misc/atmel_pwm.c
@@ -407,3 +407,4 @@
MODULE_DESCRIPTION("Driver for AT32/AT91 PWM module");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_pwm");
diff --git a/drivers/misc/hdpuftrs/hdpu_cpustate.c b/drivers/misc/hdpuftrs/hdpu_cpustate.c
index aa8ce7a..302e924 100644
--- a/drivers/misc/hdpuftrs/hdpu_cpustate.c
+++ b/drivers/misc/hdpuftrs/hdpu_cpustate.c
@@ -164,6 +164,7 @@
.remove = hdpu_cpustate_remove,
.driver = {
.name = HDPU_CPUSTATE_NAME,
+ .owner = THIS_MODULE,
},
};
@@ -248,3 +249,4 @@
MODULE_AUTHOR("Brian Waite");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" HDPU_CPUSTATE_NAME);
diff --git a/drivers/misc/hdpuftrs/hdpu_nexus.c b/drivers/misc/hdpuftrs/hdpu_nexus.c
index 2887b21..2fa36f7 100644
--- a/drivers/misc/hdpuftrs/hdpu_nexus.c
+++ b/drivers/misc/hdpuftrs/hdpu_nexus.c
@@ -55,6 +55,7 @@
.remove = hdpu_nexus_remove,
.driver = {
.name = HDPU_NEXUS_NAME,
+ .owner = THIS_MODULE,
},
};
@@ -151,3 +152,4 @@
MODULE_AUTHOR("Brian Waite");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" HDPU_NEXUS_NAME);
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
new file mode 100644
index 0000000..6d6286c
--- /dev/null
+++ b/drivers/misc/kgdbts.c
@@ -0,0 +1,1090 @@
+/*
+ * kgdbts is a test suite for kgdb for the sole purpose of validating
+ * that key pieces of the kgdb internals are working properly such as
+ * HW/SW breakpoints, single stepping, and NMI.
+ *
+ * Created by: Jason Wessel <jason.wessel@windriver.com>
+ *
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+/* Information about the kgdb test suite.
+ * -------------------------------------
+ *
+ * The kgdb test suite is designed as a KGDB I/O module which
+ * simulates the communications that a debugger would have with kgdb.
+ * The tests are broken up in to a line by line and referenced here as
+ * a "get" which is kgdb requesting input and "put" which is kgdb
+ * sending a response.
+ *
+ * The kgdb suite can be invoked from the kernel command line
+ * arguments system or executed dynamically at run time. The test
+ * suite uses the variable "kgdbts" to obtain the information about
+ * which tests to run and to configure the verbosity level. The
+ * following are the various characters you can use with the kgdbts=
+ * line:
+ *
+ * When using the "kgdbts=" you only choose one of the following core
+ * test types:
+ * A = Run all the core tests silently
+ * V1 = Run all the core tests with minimal output
+ * V2 = Run all the core tests in debug mode
+ *
+ * You can also specify optional tests:
+ * N## = Go to sleep with interrupts of for ## seconds
+ * to test the HW NMI watchdog
+ * F## = Break at do_fork for ## iterations
+ * S## = Break at sys_open for ## iterations
+ *
+ * NOTE: that the do_fork and sys_open tests are mutually exclusive.
+ *
+ * To invoke the kgdb test suite from boot you use a kernel start
+ * argument as follows:
+ * kgdbts=V1 kgdbwait
+ * Or if you wanted to perform the NMI test for 6 seconds and do_fork
+ * test for 100 forks, you could use:
+ * kgdbts=V1N6F100 kgdbwait
+ *
+ * The test suite can also be invoked at run time with:
+ * echo kgdbts=V1N6F100 > /sys/module/kgdbts/parameters/kgdbts
+ * Or as another example:
+ * echo kgdbts=V2 > /sys/module/kgdbts/parameters/kgdbts
+ *
+ * When developing a new kgdb arch specific implementation or
+ * using these tests for the purpose of regression testing,
+ * several invocations are required.
+ *
+ * 1) Boot with the test suite enabled by using the kernel arguments
+ * "kgdbts=V1F100 kgdbwait"
+ * ## If kgdb arch specific implementation has NMI use
+ * "kgdbts=V1N6F100
+ *
+ * 2) After the system boot run the basic test.
+ * echo kgdbts=V1 > /sys/module/kgdbts/parameters/kgdbts
+ *
+ * 3) Run the concurrency tests. It is best to use n+1
+ * while loops where n is the number of cpus you have
+ * in your system. The example below uses only two
+ * loops.
+ *
+ * ## This tests break points on sys_open
+ * while [ 1 ] ; do find / > /dev/null 2>&1 ; done &
+ * while [ 1 ] ; do find / > /dev/null 2>&1 ; done &
+ * echo kgdbts=V1S10000 > /sys/module/kgdbts/parameters/kgdbts
+ * fg # and hit control-c
+ * fg # and hit control-c
+ * ## This tests break points on do_fork
+ * while [ 1 ] ; do date > /dev/null ; done &
+ * while [ 1 ] ; do date > /dev/null ; done &
+ * echo kgdbts=V1F1000 > /sys/module/kgdbts/parameters/kgdbts
+ * fg # and hit control-c
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/kgdb.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+#include <linux/syscalls.h>
+#include <linux/nmi.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/delay.h>
+
+#define v1printk(a...) do { \
+ if (verbose) \
+ printk(KERN_INFO a); \
+ } while (0)
+#define v2printk(a...) do { \
+ if (verbose > 1) \
+ printk(KERN_INFO a); \
+ touch_nmi_watchdog(); \
+ } while (0)
+#define eprintk(a...) do { \
+ printk(KERN_ERR a); \
+ WARN_ON(1); \
+ } while (0)
+#define MAX_CONFIG_LEN 40
+
+static const char hexchars[] = "0123456789abcdef";
+static struct kgdb_io kgdbts_io_ops;
+static char get_buf[BUFMAX];
+static int get_buf_cnt;
+static char put_buf[BUFMAX];
+static int put_buf_cnt;
+static char scratch_buf[BUFMAX];
+static int verbose;
+static int repeat_test;
+static int test_complete;
+static int send_ack;
+static int final_ack;
+static int hw_break_val;
+static int hw_break_val2;
+#if defined(CONFIG_ARM) || defined(CONFIG_MIPS)
+static int arch_needs_sstep_emulation = 1;
+#else
+static int arch_needs_sstep_emulation;
+#endif
+static unsigned long sstep_addr;
+static int sstep_state;
+
+/* Storage for the registers, in GDB format. */
+static unsigned long kgdbts_gdb_regs[(NUMREGBYTES +
+ sizeof(unsigned long) - 1) /
+ sizeof(unsigned long)];
+static struct pt_regs kgdbts_regs;
+
+/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */
+static int configured = -1;
+
+#ifdef CONFIG_KGDB_TESTS_BOOT_STRING
+static char config[MAX_CONFIG_LEN] = CONFIG_KGDB_TESTS_BOOT_STRING;
+#else
+static char config[MAX_CONFIG_LEN];
+#endif
+static struct kparam_string kps = {
+ .string = config,
+ .maxlen = MAX_CONFIG_LEN,
+};
+
+static void fill_get_buf(char *buf);
+
+struct test_struct {
+ char *get;
+ char *put;
+ void (*get_handler)(char *);
+ int (*put_handler)(char *, char *);
+};
+
+struct test_state {
+ char *name;
+ struct test_struct *tst;
+ int idx;
+ int (*run_test) (int, int);
+ int (*validate_put) (char *);
+};
+
+static struct test_state ts;
+
+static int kgdbts_unreg_thread(void *ptr)
+{
+ /* Wait until the tests are complete and then ungresiter the I/O
+ * driver.
+ */
+ while (!final_ack)
+ msleep_interruptible(1500);
+
+ if (configured)
+ kgdb_unregister_io_module(&kgdbts_io_ops);
+ configured = 0;
+
+ return 0;
+}
+
+/* This is noinline such that it can be used for a single location to
+ * place a breakpoint
+ */
+static noinline void kgdbts_break_test(void)
+{
+ v2printk("kgdbts: breakpoint complete\n");
+}
+
+/* Lookup symbol info in the kernel */
+static unsigned long lookup_addr(char *arg)
+{
+ unsigned long addr = 0;
+
+ if (!strcmp(arg, "kgdbts_break_test"))
+ addr = (unsigned long)kgdbts_break_test;
+ else if (!strcmp(arg, "sys_open"))
+ addr = (unsigned long)sys_open;
+ else if (!strcmp(arg, "do_fork"))
+ addr = (unsigned long)do_fork;
+ else if (!strcmp(arg, "hw_break_val"))
+ addr = (unsigned long)&hw_break_val;
+ return addr;
+}
+
+static void break_helper(char *bp_type, char *arg, unsigned long vaddr)
+{
+ unsigned long addr;
+
+ if (arg)
+ addr = lookup_addr(arg);
+ else
+ addr = vaddr;
+
+ sprintf(scratch_buf, "%s,%lx,%i", bp_type, addr,
+ BREAK_INSTR_SIZE);
+ fill_get_buf(scratch_buf);
+}
+
+static void sw_break(char *arg)
+{
+ break_helper("Z0", arg, 0);
+}
+
+static void sw_rem_break(char *arg)
+{
+ break_helper("z0", arg, 0);
+}
+
+static void hw_break(char *arg)
+{
+ break_helper("Z1", arg, 0);
+}
+
+static void hw_rem_break(char *arg)
+{
+ break_helper("z1", arg, 0);
+}
+
+static void hw_write_break(char *arg)
+{
+ break_helper("Z2", arg, 0);
+}
+
+static void hw_rem_write_break(char *arg)
+{
+ break_helper("z2", arg, 0);
+}
+
+static void hw_access_break(char *arg)
+{
+ break_helper("Z4", arg, 0);
+}
+
+static void hw_rem_access_break(char *arg)
+{
+ break_helper("z4", arg, 0);
+}
+
+static void hw_break_val_access(void)
+{
+ hw_break_val2 = hw_break_val;
+}
+
+static void hw_break_val_write(void)
+{
+ hw_break_val++;
+}
+
+static int check_and_rewind_pc(char *put_str, char *arg)
+{
+ unsigned long addr = lookup_addr(arg);
+ int offset = 0;
+
+ kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs,
+ NUMREGBYTES);
+ gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
+ v2printk("Stopped at IP: %lx\n", instruction_pointer(&kgdbts_regs));
+#ifdef CONFIG_X86
+ /* On x86 a breakpoint stop requires it to be decremented */
+ if (addr + 1 == kgdbts_regs.ip)
+ offset = -1;
+#endif
+ if (strcmp(arg, "silent") &&
+ instruction_pointer(&kgdbts_regs) + offset != addr) {
+ eprintk("kgdbts: BP mismatch %lx expected %lx\n",
+ instruction_pointer(&kgdbts_regs) + offset, addr);
+ return 1;
+ }
+#ifdef CONFIG_X86
+ /* On x86 adjust the instruction pointer if needed */
+ kgdbts_regs.ip += offset;
+#endif
+ return 0;
+}
+
+static int check_single_step(char *put_str, char *arg)
+{
+ unsigned long addr = lookup_addr(arg);
+ /*
+ * From an arch indepent point of view the instruction pointer
+ * should be on a different instruction
+ */
+ kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs,
+ NUMREGBYTES);
+ gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
+ v2printk("Singlestep stopped at IP: %lx\n",
+ instruction_pointer(&kgdbts_regs));
+ if (instruction_pointer(&kgdbts_regs) == addr) {
+ eprintk("kgdbts: SingleStep failed at %lx\n",
+ instruction_pointer(&kgdbts_regs));
+ return 1;
+ }
+
+ return 0;
+}
+
+static void write_regs(char *arg)
+{
+ memset(scratch_buf, 0, sizeof(scratch_buf));
+ scratch_buf[0] = 'G';
+ pt_regs_to_gdb_regs(kgdbts_gdb_regs, &kgdbts_regs);
+ kgdb_mem2hex((char *)kgdbts_gdb_regs, &scratch_buf[1], NUMREGBYTES);
+ fill_get_buf(scratch_buf);
+}
+
+static void skip_back_repeat_test(char *arg)
+{
+ int go_back = simple_strtol(arg, NULL, 10);
+
+ repeat_test--;
+ if (repeat_test <= 0)
+ ts.idx++;
+ else
+ ts.idx -= go_back;
+ fill_get_buf(ts.tst[ts.idx].get);
+}
+
+static int got_break(char *put_str, char *arg)
+{
+ test_complete = 1;
+ if (!strncmp(put_str+1, arg, 2)) {
+ if (!strncmp(arg, "T0", 2))
+ test_complete = 2;
+ return 0;
+ }
+ return 1;
+}
+
+static void emul_sstep_get(char *arg)
+{
+ if (!arch_needs_sstep_emulation) {
+ fill_get_buf(arg);
+ return;
+ }
+ switch (sstep_state) {
+ case 0:
+ v2printk("Emulate single step\n");
+ /* Start by looking at the current PC */
+ fill_get_buf("g");
+ break;
+ case 1:
+ /* set breakpoint */
+ break_helper("Z0", 0, sstep_addr);
+ break;
+ case 2:
+ /* Continue */
+ fill_get_buf("c");
+ break;
+ case 3:
+ /* Clear breakpoint */
+ break_helper("z0", 0, sstep_addr);
+ break;
+ default:
+ eprintk("kgdbts: ERROR failed sstep get emulation\n");
+ }
+ sstep_state++;
+}
+
+static int emul_sstep_put(char *put_str, char *arg)
+{
+ if (!arch_needs_sstep_emulation) {
+ if (!strncmp(put_str+1, arg, 2))
+ return 0;
+ return 1;
+ }
+ switch (sstep_state) {
+ case 1:
+ /* validate the "g" packet to get the IP */
+ kgdb_hex2mem(&put_str[1], (char *)kgdbts_gdb_regs,
+ NUMREGBYTES);
+ gdb_regs_to_pt_regs(kgdbts_gdb_regs, &kgdbts_regs);
+ v2printk("Stopped at IP: %lx\n",
+ instruction_pointer(&kgdbts_regs));
+ /* Want to stop at IP + break instruction size by default */
+ sstep_addr = instruction_pointer(&kgdbts_regs) +
+ BREAK_INSTR_SIZE;
+ break;
+ case 2:
+ if (strncmp(put_str, "$OK", 3)) {
+ eprintk("kgdbts: failed sstep break set\n");
+ return 1;
+ }
+ break;
+ case 3:
+ if (strncmp(put_str, "$T0", 3)) {
+ eprintk("kgdbts: failed continue sstep\n");
+ return 1;
+ }
+ break;
+ case 4:
+ if (strncmp(put_str, "$OK", 3)) {
+ eprintk("kgdbts: failed sstep break unset\n");
+ return 1;
+ }
+ /* Single step is complete so continue on! */
+ sstep_state = 0;
+ return 0;
+ default:
+ eprintk("kgdbts: ERROR failed sstep put emulation\n");
+ }
+
+ /* Continue on the same test line until emulation is complete */
+ ts.idx--;
+ return 0;
+}
+
+static int final_ack_set(char *put_str, char *arg)
+{
+ if (strncmp(put_str+1, arg, 2))
+ return 1;
+ final_ack = 1;
+ return 0;
+}
+/*
+ * Test to plant a breakpoint and detach, which should clear out the
+ * breakpoint and restore the original instruction.
+ */
+static struct test_struct plant_and_detach_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
+ { "D", "OK" }, /* Detach */
+ { "", "" },
+};
+
+/*
+ * Simple test to write in a software breakpoint, check for the
+ * correct stop location and detach.
+ */
+static struct test_struct sw_breakpoint_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs },
+ { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
+ { "D", "OK" }, /* Detach */
+ { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "", "" },
+};
+
+/*
+ * Test a known bad memory read location to test the fault handler and
+ * read bytes 1-8 at the bad address
+ */
+static struct test_struct bad_read_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "m0,1", "E*" }, /* read 1 byte at address 1 */
+ { "m0,2", "E*" }, /* read 1 byte at address 2 */
+ { "m0,3", "E*" }, /* read 1 byte at address 3 */
+ { "m0,4", "E*" }, /* read 1 byte at address 4 */
+ { "m0,5", "E*" }, /* read 1 byte at address 5 */
+ { "m0,6", "E*" }, /* read 1 byte at address 6 */
+ { "m0,7", "E*" }, /* read 1 byte at address 7 */
+ { "m0,8", "E*" }, /* read 1 byte at address 8 */
+ { "D", "OK" }, /* Detach which removes all breakpoints and continues */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a breakpoint, remove it, single step, plant it
+ * again and detach.
+ */
+static struct test_struct singlestep_break_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs }, /* Write registers */
+ { "kgdbts_break_test", "OK", sw_rem_break }, /*remove breakpoint */
+ { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
+ { "g", "kgdbts_break_test", 0, check_single_step },
+ { "kgdbts_break_test", "OK", sw_break, }, /* set sw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs }, /* Write registers */
+ { "D", "OK" }, /* Remove all breakpoints and continues */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a breakpoint at do_fork for what ever the number
+ * of iterations required by the variable repeat_test.
+ */
+static struct test_struct do_fork_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "do_fork", "OK", sw_break, }, /* set sw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "do_fork", 0, check_and_rewind_pc }, /* check location */
+ { "write", "OK", write_regs }, /* Write registers */
+ { "do_fork", "OK", sw_rem_break }, /*remove breakpoint */
+ { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
+ { "g", "do_fork", 0, check_single_step },
+ { "do_fork", "OK", sw_break, }, /* set sw breakpoint */
+ { "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
+ { "D", "OK", 0, final_ack_set }, /* detach and unregister I/O */
+ { "", "" },
+};
+
+/* Test for hitting a breakpoint at sys_open for what ever the number
+ * of iterations required by the variable repeat_test.
+ */
+static struct test_struct sys_open_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "sys_open", "OK", sw_break, }, /* set sw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "sys_open", 0, check_and_rewind_pc }, /* check location */
+ { "write", "OK", write_regs }, /* Write registers */
+ { "sys_open", "OK", sw_rem_break }, /*remove breakpoint */
+ { "s", "T0*", emul_sstep_get, emul_sstep_put }, /* Single step */
+ { "g", "sys_open", 0, check_single_step },
+ { "sys_open", "OK", sw_break, }, /* set sw breakpoint */
+ { "7", "T0*", skip_back_repeat_test }, /* Loop based on repeat_test */
+ { "D", "OK", 0, final_ack_set }, /* detach and unregister I/O */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a simple hw breakpoint
+ */
+static struct test_struct hw_breakpoint_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "kgdbts_break_test", "OK", hw_break, }, /* set hw breakpoint */
+ { "c", "T0*", }, /* Continue */
+ { "g", "kgdbts_break_test", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs },
+ { "kgdbts_break_test", "OK", hw_rem_break }, /*remove breakpoint */
+ { "D", "OK" }, /* Detach */
+ { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a hw write breakpoint
+ */
+static struct test_struct hw_write_break_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "hw_break_val", "OK", hw_write_break, }, /* set hw breakpoint */
+ { "c", "T0*", 0, got_break }, /* Continue */
+ { "g", "silent", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs },
+ { "hw_break_val", "OK", hw_rem_write_break }, /*remove breakpoint */
+ { "D", "OK" }, /* Detach */
+ { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a hw access breakpoint
+ */
+static struct test_struct hw_access_break_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "hw_break_val", "OK", hw_access_break, }, /* set hw breakpoint */
+ { "c", "T0*", 0, got_break }, /* Continue */
+ { "g", "silent", 0, check_and_rewind_pc },
+ { "write", "OK", write_regs },
+ { "hw_break_val", "OK", hw_rem_access_break }, /*remove breakpoint */
+ { "D", "OK" }, /* Detach */
+ { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "", "" },
+};
+
+/*
+ * Test for hitting a hw access breakpoint
+ */
+static struct test_struct nmi_sleep_test[] = {
+ { "?", "S0*" }, /* Clear break points */
+ { "c", "T0*", 0, got_break }, /* Continue */
+ { "D", "OK" }, /* Detach */
+ { "D", "OK", 0, got_break }, /* If the test worked we made it here */
+ { "", "" },
+};
+
+static void fill_get_buf(char *buf)
+{
+ unsigned char checksum = 0;
+ int count = 0;
+ char ch;
+
+ strcpy(get_buf, "$");
+ strcat(get_buf, buf);
+ while ((ch = buf[count])) {
+ checksum += ch;
+ count++;
+ }
+ strcat(get_buf, "#");
+ get_buf[count + 2] = hexchars[checksum >> 4];
+ get_buf[count + 3] = hexchars[checksum & 0xf];
+ get_buf[count + 4] = '\0';
+ v2printk("get%i: %s\n", ts.idx, get_buf);
+}
+
+static int validate_simple_test(char *put_str)
+{
+ char *chk_str;
+
+ if (ts.tst[ts.idx].put_handler)
+ return ts.tst[ts.idx].put_handler(put_str,
+ ts.tst[ts.idx].put);
+
+ chk_str = ts.tst[ts.idx].put;
+ if (*put_str == '$')
+ put_str++;
+
+ while (*chk_str != '\0' && *put_str != '\0') {
+ /* If someone does a * to match the rest of the string, allow
+ * it, or stop if the recieved string is complete.
+ */
+ if (*put_str == '#' || *chk_str == '*')
+ return 0;
+ if (*put_str != *chk_str)
+ return 1;
+
+ chk_str++;
+ put_str++;
+ }
+ if (*chk_str == '\0' && (*put_str == '\0' || *put_str == '#'))
+ return 0;
+
+ return 1;
+}
+
+static int run_simple_test(int is_get_char, int chr)
+{
+ int ret = 0;
+ if (is_get_char) {
+ /* Send an ACK on the get if a prior put completed and set the
+ * send ack variable
+ */
+ if (send_ack) {
+ send_ack = 0;
+ return '+';
+ }
+ /* On the first get char, fill the transmit buffer and then
+ * take from the get_string.
+ */
+ if (get_buf_cnt == 0) {
+ if (ts.tst[ts.idx].get_handler)
+ ts.tst[ts.idx].get_handler(ts.tst[ts.idx].get);
+ else
+ fill_get_buf(ts.tst[ts.idx].get);
+ }
+
+ if (get_buf[get_buf_cnt] == '\0') {
+ eprintk("kgdbts: ERROR GET: EOB on '%s' at %i\n",
+ ts.name, ts.idx);
+ get_buf_cnt = 0;
+ fill_get_buf("D");
+ }
+ ret = get_buf[get_buf_cnt];
+ get_buf_cnt++;
+ return ret;
+ }
+
+ /* This callback is a put char which is when kgdb sends data to
+ * this I/O module.
+ */
+ if (ts.tst[ts.idx].get[0] == '\0' &&
+ ts.tst[ts.idx].put[0] == '\0') {
+ eprintk("kgdbts: ERROR: beyond end of test on"
+ " '%s' line %i\n", ts.name, ts.idx);
+ return 0;
+ }
+
+ if (put_buf_cnt >= BUFMAX) {
+ eprintk("kgdbts: ERROR: put buffer overflow on"
+ " '%s' line %i\n", ts.name, ts.idx);
+ put_buf_cnt = 0;
+ return 0;
+ }
+ /* Ignore everything until the first valid packet start '$' */
+ if (put_buf_cnt == 0 && chr != '$')
+ return 0;
+
+ put_buf[put_buf_cnt] = chr;
+ put_buf_cnt++;
+
+ /* End of packet == #XX so look for the '#' */
+ if (put_buf_cnt > 3 && put_buf[put_buf_cnt - 3] == '#') {
+ put_buf[put_buf_cnt] = '\0';
+ v2printk("put%i: %s\n", ts.idx, put_buf);
+ /* Trigger check here */
+ if (ts.validate_put && ts.validate_put(put_buf)) {
+ eprintk("kgdbts: ERROR PUT: end of test "
+ "buffer on '%s' line %i expected %s got %s\n",
+ ts.name, ts.idx, ts.tst[ts.idx].put, put_buf);
+ }
+ ts.idx++;
+ put_buf_cnt = 0;
+ get_buf_cnt = 0;
+ send_ack = 1;
+ }
+ return 0;
+}
+
+static void init_simple_test(void)
+{
+ memset(&ts, 0, sizeof(ts));
+ ts.run_test = run_simple_test;
+ ts.validate_put = validate_simple_test;
+}
+
+static void run_plant_and_detach_test(int is_early)
+{
+ char before[BREAK_INSTR_SIZE];
+ char after[BREAK_INSTR_SIZE];
+
+ probe_kernel_read(before, (char *)kgdbts_break_test,
+ BREAK_INSTR_SIZE);
+ init_simple_test();
+ ts.tst = plant_and_detach_test;
+ ts.name = "plant_and_detach_test";
+ /* Activate test with initial breakpoint */
+ if (!is_early)
+ kgdb_breakpoint();
+ probe_kernel_read(after, (char *)kgdbts_break_test,
+ BREAK_INSTR_SIZE);
+ if (memcmp(before, after, BREAK_INSTR_SIZE)) {
+ printk(KERN_CRIT "kgdbts: ERROR kgdb corrupted memory\n");
+ panic("kgdb memory corruption");
+ }
+
+ /* complete the detach test */
+ if (!is_early)
+ kgdbts_break_test();
+}
+
+static void run_breakpoint_test(int is_hw_breakpoint)
+{
+ test_complete = 0;
+ init_simple_test();
+ if (is_hw_breakpoint) {
+ ts.tst = hw_breakpoint_test;
+ ts.name = "hw_breakpoint_test";
+ } else {
+ ts.tst = sw_breakpoint_test;
+ ts.name = "sw_breakpoint_test";
+ }
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+ /* run code with the break point in it */
+ kgdbts_break_test();
+ kgdb_breakpoint();
+
+ if (test_complete)
+ return;
+
+ eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+}
+
+static void run_hw_break_test(int is_write_test)
+{
+ test_complete = 0;
+ init_simple_test();
+ if (is_write_test) {
+ ts.tst = hw_write_break_test;
+ ts.name = "hw_write_break_test";
+ } else {
+ ts.tst = hw_access_break_test;
+ ts.name = "hw_access_break_test";
+ }
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+ hw_break_val_access();
+ if (is_write_test) {
+ if (test_complete == 2)
+ eprintk("kgdbts: ERROR %s broke on access\n",
+ ts.name);
+ hw_break_val_write();
+ }
+ kgdb_breakpoint();
+
+ if (test_complete == 1)
+ return;
+
+ eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+}
+
+static void run_nmi_sleep_test(int nmi_sleep)
+{
+ unsigned long flags;
+
+ init_simple_test();
+ ts.tst = nmi_sleep_test;
+ ts.name = "nmi_sleep_test";
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+ local_irq_save(flags);
+ mdelay(nmi_sleep*1000);
+ touch_nmi_watchdog();
+ local_irq_restore(flags);
+ if (test_complete != 2)
+ eprintk("kgdbts: ERROR nmi_test did not hit nmi\n");
+ kgdb_breakpoint();
+ if (test_complete == 1)
+ return;
+
+ eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+}
+
+static void run_bad_read_test(void)
+{
+ init_simple_test();
+ ts.tst = bad_read_test;
+ ts.name = "bad_read_test";
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+}
+
+static void run_do_fork_test(void)
+{
+ init_simple_test();
+ ts.tst = do_fork_test;
+ ts.name = "do_fork_test";
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+}
+
+static void run_sys_open_test(void)
+{
+ init_simple_test();
+ ts.tst = sys_open_test;
+ ts.name = "sys_open_test";
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+}
+
+static void run_singlestep_break_test(void)
+{
+ init_simple_test();
+ ts.tst = singlestep_break_test;
+ ts.name = "singlestep_breakpoint_test";
+ /* Activate test with initial breakpoint */
+ kgdb_breakpoint();
+ kgdbts_break_test();
+ kgdbts_break_test();
+}
+
+static void kgdbts_run_tests(void)
+{
+ char *ptr;
+ int fork_test = 0;
+ int sys_open_test = 0;
+ int nmi_sleep = 0;
+
+ ptr = strstr(config, "F");
+ if (ptr)
+ fork_test = simple_strtol(ptr+1, NULL, 10);
+ ptr = strstr(config, "S");
+ if (ptr)
+ sys_open_test = simple_strtol(ptr+1, NULL, 10);
+ ptr = strstr(config, "N");
+ if (ptr)
+ nmi_sleep = simple_strtol(ptr+1, NULL, 10);
+
+ /* required internal KGDB tests */
+ v1printk("kgdbts:RUN plant and detach test\n");
+ run_plant_and_detach_test(0);
+ v1printk("kgdbts:RUN sw breakpoint test\n");
+ run_breakpoint_test(0);
+ v1printk("kgdbts:RUN bad memory access test\n");
+ run_bad_read_test();
+ v1printk("kgdbts:RUN singlestep breakpoint test\n");
+ run_singlestep_break_test();
+
+ /* ===Optional tests=== */
+
+ /* All HW break point tests */
+ if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
+ v1printk("kgdbts:RUN hw breakpoint test\n");
+ run_breakpoint_test(1);
+ v1printk("kgdbts:RUN hw write breakpoint test\n");
+ run_hw_break_test(1);
+ v1printk("kgdbts:RUN access write breakpoint test\n");
+ run_hw_break_test(0);
+ }
+
+ if (nmi_sleep) {
+ v1printk("kgdbts:RUN NMI sleep %i seconds test\n", nmi_sleep);
+ run_nmi_sleep_test(nmi_sleep);
+ }
+
+ /* If the do_fork test is run it will be the last test that is
+ * executed because a kernel thread will be spawned at the very
+ * end to unregister the debug hooks.
+ */
+ if (fork_test) {
+ repeat_test = fork_test;
+ printk(KERN_INFO "kgdbts:RUN do_fork for %i breakpoints\n",
+ repeat_test);
+ kthread_run(kgdbts_unreg_thread, 0, "kgdbts_unreg");
+ run_do_fork_test();
+ return;
+ }
+
+ /* If the sys_open test is run it will be the last test that is
+ * executed because a kernel thread will be spawned at the very
+ * end to unregister the debug hooks.
+ */
+ if (sys_open_test) {
+ repeat_test = sys_open_test;
+ printk(KERN_INFO "kgdbts:RUN sys_open for %i breakpoints\n",
+ repeat_test);
+ kthread_run(kgdbts_unreg_thread, 0, "kgdbts_unreg");
+ run_sys_open_test();
+ return;
+ }
+ /* Shutdown and unregister */
+ kgdb_unregister_io_module(&kgdbts_io_ops);
+ configured = 0;
+}
+
+static int kgdbts_option_setup(char *opt)
+{
+ if (strlen(opt) > MAX_CONFIG_LEN) {
+ printk(KERN_ERR "kgdbts: config string too long\n");
+ return -ENOSPC;
+ }
+ strcpy(config, opt);
+
+ verbose = 0;
+ if (strstr(config, "V1"))
+ verbose = 1;
+ if (strstr(config, "V2"))
+ verbose = 2;
+
+ return 0;
+}
+
+__setup("kgdbts=", kgdbts_option_setup);
+
+static int configure_kgdbts(void)
+{
+ int err = 0;
+
+ if (!strlen(config) || isspace(config[0]))
+ goto noconfig;
+ err = kgdbts_option_setup(config);
+ if (err)
+ goto noconfig;
+
+ final_ack = 0;
+ run_plant_and_detach_test(1);
+
+ err = kgdb_register_io_module(&kgdbts_io_ops);
+ if (err) {
+ configured = 0;
+ return err;
+ }
+ configured = 1;
+ kgdbts_run_tests();
+
+ return err;
+
+noconfig:
+ config[0] = 0;
+ configured = 0;
+
+ return err;
+}
+
+static int __init init_kgdbts(void)
+{
+ /* Already configured? */
+ if (configured == 1)
+ return 0;
+
+ return configure_kgdbts();
+}
+
+static void cleanup_kgdbts(void)
+{
+ if (configured == 1)
+ kgdb_unregister_io_module(&kgdbts_io_ops);
+}
+
+static int kgdbts_get_char(void)
+{
+ int val = 0;
+
+ if (ts.run_test)
+ val = ts.run_test(1, 0);
+
+ return val;
+}
+
+static void kgdbts_put_char(u8 chr)
+{
+ if (ts.run_test)
+ ts.run_test(0, chr);
+}
+
+static int param_set_kgdbts_var(const char *kmessage, struct kernel_param *kp)
+{
+ int len = strlen(kmessage);
+
+ if (len >= MAX_CONFIG_LEN) {
+ printk(KERN_ERR "kgdbts: config string too long\n");
+ return -ENOSPC;
+ }
+
+ /* Only copy in the string if the init function has not run yet */
+ if (configured < 0) {
+ strcpy(config, kmessage);
+ return 0;
+ }
+
+ if (kgdb_connected) {
+ printk(KERN_ERR
+ "kgdbts: Cannot reconfigure while KGDB is connected.\n");
+
+ return -EBUSY;
+ }
+
+ strcpy(config, kmessage);
+ /* Chop out \n char as a result of echo */
+ if (config[len - 1] == '\n')
+ config[len - 1] = '\0';
+
+ if (configured == 1)
+ cleanup_kgdbts();
+
+ /* Go and configure with the new params. */
+ return configure_kgdbts();
+}
+
+static void kgdbts_pre_exp_handler(void)
+{
+ /* Increment the module count when the debugger is active */
+ if (!kgdb_connected)
+ try_module_get(THIS_MODULE);
+}
+
+static void kgdbts_post_exp_handler(void)
+{
+ /* decrement the module count when the debugger detaches */
+ if (!kgdb_connected)
+ module_put(THIS_MODULE);
+}
+
+static struct kgdb_io kgdbts_io_ops = {
+ .name = "kgdbts",
+ .read_char = kgdbts_get_char,
+ .write_char = kgdbts_put_char,
+ .pre_exception = kgdbts_pre_exp_handler,
+ .post_exception = kgdbts_post_exp_handler,
+};
+
+module_init(init_kgdbts);
+module_exit(cleanup_kgdbts);
+module_param_call(kgdbts, param_set_kgdbts_var, param_get_string, &kps, 0644);
+MODULE_PARM_DESC(kgdbts, "<A|V1|V2>[F#|S#][N#]");
+MODULE_DESCRIPTION("KGDB Test Suite");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Wind River Systems, Inc.");
+
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 21acecc..a28fc2f 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -1075,3 +1075,4 @@
MODULE_DESCRIPTION("AT91 Multimedia Card Interface driver");
MODULE_AUTHOR("Nick Randell");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_mci");
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index c3926eb..cc5f7bc 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -998,6 +998,7 @@
.resume = NULL,
.driver = {
.name = DRIVER_NAME,
+ .owner = THIS_MODULE,
},
};
@@ -1018,5 +1019,6 @@
MODULE_AUTHOR("Advanced Micro Devices, Inc");
MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:au1xxx-mmc");
#endif
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index f2070a1..95f33e8 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -1128,6 +1128,7 @@
.resume = imxmci_resume,
.driver = {
.name = DRIVER_NAME,
+ .owner = THIS_MODULE,
}
};
@@ -1147,3 +1148,4 @@
MODULE_DESCRIPTION("i.MX Multimedia Card Interface Driver");
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imx-mmc");
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index c9dfeb1..90c358b 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1255,6 +1255,7 @@
.resume = mmc_omap_resume,
.driver = {
.name = DRIVER_NAME,
+ .owner = THIS_MODULE,
},
};
@@ -1273,5 +1274,5 @@
MODULE_DESCRIPTION("OMAP Multimedia Card driver");
MODULE_LICENSE("GPL");
-MODULE_ALIAS(DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_AUTHOR("Juha Yrjölä");
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 1ea8482..65210fc 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -693,6 +693,7 @@
.resume = pxamci_resume,
.driver = {
.name = DRIVER_NAME,
+ .owner = THIS_MODULE,
},
};
@@ -711,3 +712,4 @@
MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-mci");
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 4d5f374..be624a0 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -1948,6 +1948,7 @@
.resume = wbsd_platform_resume,
.driver = {
.name = DRIVER_NAME,
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 47794d2..0080452 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -718,7 +718,7 @@
/* Someone else might have been playing with it. */
return -EAGAIN;
}
-
+ /* Fall through */
case FL_READY:
case FL_CFI_QUERY:
case FL_JEDEC_QUERY:
@@ -778,14 +778,14 @@
chip->state = FL_READY;
return 0;
+ case FL_SHUTDOWN:
+ /* The machine is rebooting now,so no one can get chip anymore */
+ return -EIO;
case FL_POINT:
/* Only if there's no operation suspended... */
if (mode == FL_READY && chip->oldstate == FL_READY)
return 0;
-
- case FL_SHUTDOWN:
- /* The machine is rebooting now,so no one can get chip anymore */
- return -EIO;
+ /* Fall through */
default:
sleep:
set_current_state(TASK_UNINTERRUPTIBLE);
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index d072e87..458d477 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1763,6 +1763,7 @@
default:
/* Not an idle state */
+ set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&chip->wq, &wait);
spin_unlock(chip->mutex);
diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c
index b344ff8..492e2ab 100644
--- a/drivers/mtd/chips/cfi_cmdset_0020.c
+++ b/drivers/mtd/chips/cfi_cmdset_0020.c
@@ -1015,6 +1015,7 @@
default:
/* Not an idle state */
+ set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&chip->wq, &wait);
spin_unlock_bh(chip->mutex);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fe7b5ec..3a0b20a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2635,7 +2635,7 @@
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
- depends on PPC64 && PCI
+ depends on PPC_PASEMI && PCI
select PHYLIB
select INET_LRO
help
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 25f1337..59dce6a 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -148,7 +148,7 @@
unsigned long offset,
enum dma_data_direction dir)
{
- dma_sync_single_range_for_device(sdev->dev, dma_base,
+ dma_sync_single_range_for_device(sdev->dma_dev, dma_base,
offset & dma_desc_align_mask,
dma_desc_sync_size, dir);
}
@@ -158,7 +158,7 @@
unsigned long offset,
enum dma_data_direction dir)
{
- dma_sync_single_range_for_cpu(sdev->dev, dma_base,
+ dma_sync_single_range_for_cpu(sdev->dma_dev, dma_base,
offset & dma_desc_align_mask,
dma_desc_sync_size, dir);
}
@@ -613,7 +613,7 @@
BUG_ON(skb == NULL);
- dma_unmap_single(bp->sdev->dev,
+ dma_unmap_single(bp->sdev->dma_dev,
rp->mapping,
skb->len,
DMA_TO_DEVICE);
@@ -653,7 +653,7 @@
if (skb == NULL)
return -ENOMEM;
- mapping = dma_map_single(bp->sdev->dev, skb->data,
+ mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
RX_PKT_BUF_SZ,
DMA_FROM_DEVICE);
@@ -663,19 +663,19 @@
mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
/* Sigh... */
if (!dma_mapping_error(mapping))
- dma_unmap_single(bp->sdev->dev, mapping,
+ dma_unmap_single(bp->sdev->dma_dev, mapping,
RX_PKT_BUF_SZ, DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA);
if (skb == NULL)
return -ENOMEM;
- mapping = dma_map_single(bp->sdev->dev, skb->data,
+ mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
RX_PKT_BUF_SZ,
DMA_FROM_DEVICE);
if (dma_mapping_error(mapping) ||
mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
if (!dma_mapping_error(mapping))
- dma_unmap_single(bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
+ dma_unmap_single(bp->sdev->dma_dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
return -ENOMEM;
}
@@ -750,7 +750,7 @@
dest_idx * sizeof(dest_desc),
DMA_BIDIRECTIONAL);
- dma_sync_single_for_device(bp->sdev->dev, le32_to_cpu(src_desc->addr),
+ dma_sync_single_for_device(bp->sdev->dma_dev, le32_to_cpu(src_desc->addr),
RX_PKT_BUF_SZ,
DMA_FROM_DEVICE);
}
@@ -772,7 +772,7 @@
struct rx_header *rh;
u16 len;
- dma_sync_single_for_cpu(bp->sdev->dev, map,
+ dma_sync_single_for_cpu(bp->sdev->dma_dev, map,
RX_PKT_BUF_SZ,
DMA_FROM_DEVICE);
rh = (struct rx_header *) skb->data;
@@ -806,7 +806,7 @@
skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
if (skb_size < 0)
goto drop_it;
- dma_unmap_single(bp->sdev->dev, map,
+ dma_unmap_single(bp->sdev->dma_dev, map,
skb_size, DMA_FROM_DEVICE);
/* Leave out rx_header */
skb_put(skb, len + RX_PKT_OFFSET);
@@ -966,24 +966,24 @@
goto err_out;
}
- mapping = dma_map_single(bp->sdev->dev, skb->data, len, DMA_TO_DEVICE);
+ mapping = dma_map_single(bp->sdev->dma_dev, skb->data, len, DMA_TO_DEVICE);
if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) {
struct sk_buff *bounce_skb;
/* Chip can't handle DMA to/from >1GB, use bounce buffer */
if (!dma_mapping_error(mapping))
- dma_unmap_single(bp->sdev->dev, mapping, len,
+ dma_unmap_single(bp->sdev->dma_dev, mapping, len,
DMA_TO_DEVICE);
bounce_skb = __dev_alloc_skb(len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb)
goto err_out;
- mapping = dma_map_single(bp->sdev->dev, bounce_skb->data,
+ mapping = dma_map_single(bp->sdev->dma_dev, bounce_skb->data,
len, DMA_TO_DEVICE);
if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) {
if (!dma_mapping_error(mapping))
- dma_unmap_single(bp->sdev->dev, mapping,
+ dma_unmap_single(bp->sdev->dma_dev, mapping,
len, DMA_TO_DEVICE);
dev_kfree_skb_any(bounce_skb);
goto err_out;
@@ -1082,7 +1082,7 @@
if (rp->skb == NULL)
continue;
- dma_unmap_single(bp->sdev->dev, rp->mapping, RX_PKT_BUF_SZ,
+ dma_unmap_single(bp->sdev->dma_dev, rp->mapping, RX_PKT_BUF_SZ,
DMA_FROM_DEVICE);
dev_kfree_skb_any(rp->skb);
rp->skb = NULL;
@@ -1094,7 +1094,7 @@
if (rp->skb == NULL)
continue;
- dma_unmap_single(bp->sdev->dev, rp->mapping, rp->skb->len,
+ dma_unmap_single(bp->sdev->dma_dev, rp->mapping, rp->skb->len,
DMA_TO_DEVICE);
dev_kfree_skb_any(rp->skb);
rp->skb = NULL;
@@ -1117,12 +1117,12 @@
memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
if (bp->flags & B44_FLAG_RX_RING_HACK)
- dma_sync_single_for_device(bp->sdev->dev, bp->rx_ring_dma,
+ dma_sync_single_for_device(bp->sdev->dma_dev, bp->rx_ring_dma,
DMA_TABLE_BYTES,
DMA_BIDIRECTIONAL);
if (bp->flags & B44_FLAG_TX_RING_HACK)
- dma_sync_single_for_device(bp->sdev->dev, bp->tx_ring_dma,
+ dma_sync_single_for_device(bp->sdev->dma_dev, bp->tx_ring_dma,
DMA_TABLE_BYTES,
DMA_TO_DEVICE);
@@ -1144,24 +1144,24 @@
bp->tx_buffers = NULL;
if (bp->rx_ring) {
if (bp->flags & B44_FLAG_RX_RING_HACK) {
- dma_unmap_single(bp->sdev->dev, bp->rx_ring_dma,
+ dma_unmap_single(bp->sdev->dma_dev, bp->rx_ring_dma,
DMA_TABLE_BYTES,
DMA_BIDIRECTIONAL);
kfree(bp->rx_ring);
} else
- dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES,
+ dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES,
bp->rx_ring, bp->rx_ring_dma);
bp->rx_ring = NULL;
bp->flags &= ~B44_FLAG_RX_RING_HACK;
}
if (bp->tx_ring) {
if (bp->flags & B44_FLAG_TX_RING_HACK) {
- dma_unmap_single(bp->sdev->dev, bp->tx_ring_dma,
+ dma_unmap_single(bp->sdev->dma_dev, bp->tx_ring_dma,
DMA_TABLE_BYTES,
DMA_TO_DEVICE);
kfree(bp->tx_ring);
} else
- dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES,
+ dma_free_coherent(bp->sdev->dma_dev, DMA_TABLE_BYTES,
bp->tx_ring, bp->tx_ring_dma);
bp->tx_ring = NULL;
bp->flags &= ~B44_FLAG_TX_RING_HACK;
@@ -1187,7 +1187,7 @@
goto out_err;
size = DMA_TABLE_BYTES;
- bp->rx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->rx_ring_dma, gfp);
+ bp->rx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size, &bp->rx_ring_dma, gfp);
if (!bp->rx_ring) {
/* Allocation may have failed due to pci_alloc_consistent
insisting on use of GFP_DMA, which is more restrictive
@@ -1199,7 +1199,7 @@
if (!rx_ring)
goto out_err;
- rx_ring_dma = dma_map_single(bp->sdev->dev, rx_ring,
+ rx_ring_dma = dma_map_single(bp->sdev->dma_dev, rx_ring,
DMA_TABLE_BYTES,
DMA_BIDIRECTIONAL);
@@ -1214,7 +1214,7 @@
bp->flags |= B44_FLAG_RX_RING_HACK;
}
- bp->tx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->tx_ring_dma, gfp);
+ bp->tx_ring = dma_alloc_coherent(bp->sdev->dma_dev, size, &bp->tx_ring_dma, gfp);
if (!bp->tx_ring) {
/* Allocation may have failed due to dma_alloc_coherent
insisting on use of GFP_DMA, which is more restrictive
@@ -1226,7 +1226,7 @@
if (!tx_ring)
goto out_err;
- tx_ring_dma = dma_map_single(bp->sdev->dev, tx_ring,
+ tx_ring_dma = dma_map_single(bp->sdev->dma_dev, tx_ring,
DMA_TABLE_BYTES,
DMA_TO_DEVICE);
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c993a32..26b2dd5 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -575,7 +575,6 @@
static int bf537mac_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
- struct bf537mac_local *lp = netdev_priv(dev);
unsigned int data;
current_tx_ptr->skb = skb;
@@ -634,7 +633,6 @@
static void bf537mac_rx(struct net_device *dev)
{
struct sk_buff *skb, *new_skb;
- struct bf537mac_local *lp = netdev_priv(dev);
unsigned short len;
/* allocate a new skb for next time receive */
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index de32b3f..7bdb5af 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -63,8 +63,8 @@
#include "bnx2x.h"
#include "bnx2x_init.h"
-#define DRV_MODULE_VERSION "1.42.3"
-#define DRV_MODULE_RELDATE "2008/3/9"
+#define DRV_MODULE_VERSION "1.42.4"
+#define DRV_MODULE_RELDATE "2008/4/9"
#define BNX2X_BC_VER 0x040200
/* Time in jiffies before concluding the transmitter is hung. */
@@ -6153,7 +6153,7 @@
func, mode);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
0xffffffff);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
0xfffc);
bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 90a1f31..979c2d0 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -341,6 +341,7 @@
if (command[0] == '-') {
dev = NULL;
+ original_mtu = 0;
bond_for_each_slave(bond, slave, i)
if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
dev = slave->dev;
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 93b7fb2..a8d3280 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0089"
+#define DRV_VERSION "EHEA_0090"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
@@ -371,6 +371,7 @@
struct ehea_q_skb_arr rq2_skba;
struct ehea_q_skb_arr rq3_skba;
struct ehea_q_skb_arr sq_skba;
+ int sq_skba_size;
spinlock_t netif_queue;
int queue_stopped;
int swqe_refill_th;
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 07c742d..f460b62 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -349,7 +349,8 @@
pr->rq1_skba.os_skbs = 0;
if (unlikely(test_bit(__EHEA_STOP_XFER, &ehea_driver_flags))) {
- pr->rq1_skba.index = index;
+ if (nr_of_wqes > 0)
+ pr->rq1_skba.index = index;
pr->rq1_skba.os_skbs = fill_wqes;
return;
}
@@ -1464,7 +1465,9 @@
init_attr->act_nr_rwqes_rq2,
init_attr->act_nr_rwqes_rq3);
- ret = ehea_init_q_skba(&pr->sq_skba, init_attr->act_nr_send_wqes + 1);
+ pr->sq_skba_size = init_attr->act_nr_send_wqes + 1;
+
+ ret = ehea_init_q_skba(&pr->sq_skba, pr->sq_skba_size);
ret |= ehea_init_q_skba(&pr->rq1_skba, init_attr->act_nr_rwqes_rq1 + 1);
ret |= ehea_init_q_skba(&pr->rq2_skba, init_attr->act_nr_rwqes_rq2 + 1);
ret |= ehea_init_q_skba(&pr->rq3_skba, init_attr->act_nr_rwqes_rq3 + 1);
@@ -2621,6 +2624,22 @@
}
}
+void ehea_flush_sq(struct ehea_port *port)
+{
+ int i;
+
+ for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
+ struct ehea_port_res *pr = &port->port_res[i];
+ int swqe_max = pr->sq_skba_size - 2 - pr->swqe_ll_count;
+ int k = 0;
+ while (atomic_read(&pr->swqe_avail) < swqe_max) {
+ msleep(5);
+ if (++k == 20)
+ break;
+ }
+ }
+}
+
int ehea_stop_qps(struct net_device *dev)
{
struct ehea_port *port = netdev_priv(dev);
@@ -2845,6 +2864,7 @@
if (dev->flags & IFF_UP) {
down(&port->port_lock);
netif_stop_queue(dev);
+ ehea_flush_sq(port);
ret = ehea_stop_qps(dev);
if (ret) {
up(&port->port_lock);
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 58b71e6..fe59c27 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -1057,6 +1057,7 @@
#endif
static struct of_device_id mpc52xx_fec_match[] = {
+ { .type = "network", .compatible = "fsl,mpc5200b-fec", },
{ .type = "network", .compatible = "fsl,mpc5200-fec", },
{ .type = "network", .compatible = "mpc5200-fec", },
{ }
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index 6a3ac4e..1d0cd1d 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -179,6 +179,7 @@
static struct of_device_id mpc52xx_fec_mdio_match[] = {
{ .compatible = "fsl,mpc5200b-mdio", },
+ { .compatible = "fsl,mpc5200-mdio", },
{ .compatible = "mpc5200b-fec-phy", },
{}
};
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 6f7e3fd..9f088a4 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -1854,6 +1854,7 @@
struct ring_desc* start_tx;
struct ring_desc* prev_tx;
struct nv_skb_map* prev_tx_ctx;
+ unsigned long flags;
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
@@ -1863,10 +1864,10 @@
empty_slots = nv_get_empty_tx_slots(np);
if (unlikely(empty_slots <= entries)) {
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
netif_stop_queue(dev);
np->tx_stop = 1;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
return NETDEV_TX_BUSY;
}
@@ -1929,13 +1930,13 @@
tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ?
NV_TX2_CHECKSUM_L3 | NV_TX2_CHECKSUM_L4 : 0;
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
/* set tx flags */
start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
np->put_tx.orig = put_tx;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
dprintk(KERN_DEBUG "%s: nv_start_xmit: entries %d queued for transmission. tx_flags_extra: %x\n",
dev->name, entries, tx_flags_extra);
@@ -1971,6 +1972,7 @@
struct ring_desc_ex* prev_tx;
struct nv_skb_map* prev_tx_ctx;
struct nv_skb_map* start_tx_ctx;
+ unsigned long flags;
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
@@ -1980,10 +1982,10 @@
empty_slots = nv_get_empty_tx_slots(np);
if (unlikely(empty_slots <= entries)) {
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
netif_stop_queue(dev);
np->tx_stop = 1;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
return NETDEV_TX_BUSY;
}
@@ -2059,7 +2061,7 @@
start_tx->txvlan = 0;
}
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
if (np->tx_limit) {
/* Limit the number of outstanding tx. Setup all fragments, but
@@ -2085,7 +2087,7 @@
start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
np->put_tx.ex = put_tx;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
dprintk(KERN_DEBUG "%s: nv_start_xmit_optimized: entries %d queued for transmission. tx_flags_extra: %x\n",
dev->name, entries, tx_flags_extra);
@@ -2110,9 +2112,8 @@
np->tx_pkts_in_progress--;
if (np->tx_change_owner) {
- __le32 flaglen = le32_to_cpu(np->tx_change_owner->first_tx_desc->flaglen);
- flaglen |= NV_TX2_VALID;
- np->tx_change_owner->first_tx_desc->flaglen = cpu_to_le32(flaglen);
+ np->tx_change_owner->first_tx_desc->flaglen |=
+ cpu_to_le32(NV_TX2_VALID);
np->tx_pkts_in_progress++;
np->tx_change_owner = np->tx_change_owner->next_tx_ctx;
@@ -5315,8 +5316,7 @@
/* check the workaround bit for correct mac address order */
txreg = readl(base + NvRegTransmitPoll);
- if ((txreg & NVREG_TRANSMITPOLL_MAC_ADDR_REV) ||
- (id->driver_data & DEV_HAS_CORRECT_MACADDR)) {
+ if (id->driver_data & DEV_HAS_CORRECT_MACADDR) {
/* mac address is already in correct order */
dev->dev_addr[0] = (np->orig_mac[0] >> 0) & 0xff;
dev->dev_addr[1] = (np->orig_mac[0] >> 8) & 0xff;
@@ -5324,6 +5324,22 @@
dev->dev_addr[3] = (np->orig_mac[0] >> 24) & 0xff;
dev->dev_addr[4] = (np->orig_mac[1] >> 0) & 0xff;
dev->dev_addr[5] = (np->orig_mac[1] >> 8) & 0xff;
+ } else if (txreg & NVREG_TRANSMITPOLL_MAC_ADDR_REV) {
+ /* mac address is already in correct order */
+ dev->dev_addr[0] = (np->orig_mac[0] >> 0) & 0xff;
+ dev->dev_addr[1] = (np->orig_mac[0] >> 8) & 0xff;
+ dev->dev_addr[2] = (np->orig_mac[0] >> 16) & 0xff;
+ dev->dev_addr[3] = (np->orig_mac[0] >> 24) & 0xff;
+ dev->dev_addr[4] = (np->orig_mac[1] >> 0) & 0xff;
+ dev->dev_addr[5] = (np->orig_mac[1] >> 8) & 0xff;
+ /*
+ * Set orig mac address back to the reversed version.
+ * This flag will be cleared during low power transition.
+ * Therefore, we should always put back the reversed address.
+ */
+ np->orig_mac[0] = (dev->dev_addr[5] << 0) + (dev->dev_addr[4] << 8) +
+ (dev->dev_addr[3] << 16) + (dev->dev_addr[2] << 24);
+ np->orig_mac[1] = (dev->dev_addr[1] << 0) + (dev->dev_addr[0] << 8);
} else {
/* need to reverse mac address to correct order */
dev->dev_addr[0] = (np->orig_mac[1] >> 8) & 0xff;
@@ -5594,7 +5610,9 @@
static int nv_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
+ u8 __iomem *base = get_hwbase(dev);
int rc = 0;
+ u32 txreg;
if (!netif_running(dev))
goto out;
@@ -5605,6 +5623,11 @@
pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D0, 0);
+ /* restore mac address reverse flag */
+ txreg = readl(base + NvRegTransmitPoll);
+ txreg |= NVREG_TRANSMITPOLL_MAC_ADDR_REV;
+ writel(txreg, base + NvRegTransmitPoll);
+
rc = nv_open(dev);
out:
return rc;
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index af869cf..940e204 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -835,7 +835,8 @@
netif_stop_queue(dev);
netif_carrier_off(dev);
- napi_disable(&fep->napi);
+ if (fep->fpi->use_napi)
+ napi_disable(&fep->napi);
phy_stop(fep->phydev);
spin_lock_irqsave(&fep->lock, flags);
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 0789802..378a239 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1242,8 +1242,8 @@
static inline u16 emac_tx_csum(struct emac_instance *dev,
struct sk_buff *skb)
{
- if (emac_has_feature(dev, EMAC_FTR_HAS_TAH &&
- skb->ip_summed == CHECKSUM_PARTIAL)) {
+ if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) &&
+ (skb->ip_summed == CHECKSUM_PARTIAL)) {
++dev->stats.tx_packets_csum;
return EMAC_TX_CTRL_TAH_CSUM;
}
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 1d210ed..489c7c3 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -242,12 +242,12 @@
/* Enable managment port */
macb_writel(bp, NCR, MACB_BIT(MPE));
- bp->mii_bus.name = "MACB_mii_bus",
- bp->mii_bus.read = &macb_mdio_read,
- bp->mii_bus.write = &macb_mdio_write,
- bp->mii_bus.reset = &macb_mdio_reset,
- bp->mii_bus.id = bp->pdev->id,
- bp->mii_bus.priv = bp,
+ bp->mii_bus.name = "MACB_mii_bus";
+ bp->mii_bus.read = &macb_mdio_read;
+ bp->mii_bus.write = &macb_mdio_write;
+ bp->mii_bus.reset = &macb_mdio_reset;
+ bp->mii_bus.id = bp->pdev->id;
+ bp->mii_bus.priv = bp;
bp->mii_bus.dev = &bp->dev->dev;
pdata = bp->pdev->dev.platform_data;
@@ -1257,6 +1257,8 @@
if (dev) {
bp = netdev_priv(dev);
+ if (bp->phy_dev)
+ phy_disconnect(bp->phy_dev);
mdiobus_unregister(&bp->mii_bus);
kfree(bp->mii_bus.irq);
unregister_netdev(dev);
diff --git a/drivers/net/mlx4/catas.c b/drivers/net/mlx4/catas.c
index 6b32ec9..aa95287 100644
--- a/drivers/net/mlx4/catas.c
+++ b/drivers/net/mlx4/catas.c
@@ -69,7 +69,7 @@
if (readl(priv->catas_err.map)) {
dump_err_buf(dev);
- mlx4_dispatch_event(dev, MLX4_EVENT_TYPE_LOCAL_CATAS_ERROR, 0, 0);
+ mlx4_dispatch_event(dev, MLX4_DEV_EVENT_CATASTROPHIC_ERROR, 0);
if (internal_err_reset) {
spin_lock(&catas_lock);
diff --git a/drivers/net/mlx4/cmd.c b/drivers/net/mlx4/cmd.c
index db49051..70dff94 100644
--- a/drivers/net/mlx4/cmd.c
+++ b/drivers/net/mlx4/cmd.c
@@ -106,7 +106,8 @@
u16 token;
};
-static int mlx4_status_to_errno(u8 status) {
+static int mlx4_status_to_errno(u8 status)
+{
static const int trans_table[] = {
[CMD_STAT_INTERNAL_ERR] = -EIO,
[CMD_STAT_BAD_OP] = -EPERM,
diff --git a/drivers/net/mlx4/cq.c b/drivers/net/mlx4/cq.c
index d4441fe..caa5bcf 100644
--- a/drivers/net/mlx4/cq.c
+++ b/drivers/net/mlx4/cq.c
@@ -38,6 +38,7 @@
#include <linux/hardirq.h>
#include <linux/mlx4/cmd.h>
+#include <linux/mlx4/cq.h>
#include "mlx4.h"
#include "icm.h"
@@ -47,21 +48,19 @@
u16 reserved1[3];
__be16 page_offset;
__be32 logsize_usrpage;
- u8 reserved2;
- u8 cq_period;
- u8 reserved3;
- u8 cq_max_count;
- u8 reserved4[3];
+ __be16 cq_period;
+ __be16 cq_max_count;
+ u8 reserved2[3];
u8 comp_eqn;
u8 log_page_size;
- u8 reserved5[2];
+ u8 reserved3[2];
u8 mtt_base_addr_h;
__be32 mtt_base_addr_l;
__be32 last_notified_index;
__be32 solicit_producer_index;
__be32 consumer_index;
__be32 producer_index;
- u32 reserved6[2];
+ u32 reserved4[2];
__be64 db_rec_addr;
};
@@ -121,6 +120,13 @@
MLX4_CMD_TIME_CLASS_A);
}
+static int mlx4_MODIFY_CQ(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox,
+ int cq_num, u32 opmod)
+{
+ return mlx4_cmd(dev, mailbox->dma, cq_num, opmod, MLX4_CMD_MODIFY_CQ,
+ MLX4_CMD_TIME_CLASS_A);
+}
+
static int mlx4_HW2SW_CQ(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox,
int cq_num)
{
@@ -129,6 +135,58 @@
MLX4_CMD_TIME_CLASS_A);
}
+int mlx4_cq_modify(struct mlx4_dev *dev, struct mlx4_cq *cq,
+ u16 count, u16 period)
+{
+ struct mlx4_cmd_mailbox *mailbox;
+ struct mlx4_cq_context *cq_context;
+ int err;
+
+ mailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(mailbox))
+ return PTR_ERR(mailbox);
+
+ cq_context = mailbox->buf;
+ memset(cq_context, 0, sizeof *cq_context);
+
+ cq_context->cq_max_count = cpu_to_be16(count);
+ cq_context->cq_period = cpu_to_be16(period);
+
+ err = mlx4_MODIFY_CQ(dev, mailbox, cq->cqn, 1);
+
+ mlx4_free_cmd_mailbox(dev, mailbox);
+ return err;
+}
+EXPORT_SYMBOL_GPL(mlx4_cq_modify);
+
+int mlx4_cq_resize(struct mlx4_dev *dev, struct mlx4_cq *cq,
+ int entries, struct mlx4_mtt *mtt)
+{
+ struct mlx4_cmd_mailbox *mailbox;
+ struct mlx4_cq_context *cq_context;
+ u64 mtt_addr;
+ int err;
+
+ mailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(mailbox))
+ return PTR_ERR(mailbox);
+
+ cq_context = mailbox->buf;
+ memset(cq_context, 0, sizeof *cq_context);
+
+ cq_context->logsize_usrpage = cpu_to_be32(ilog2(entries) << 24);
+ cq_context->log_page_size = mtt->page_shift - 12;
+ mtt_addr = mlx4_mtt_addr(dev, mtt);
+ cq_context->mtt_base_addr_h = mtt_addr >> 32;
+ cq_context->mtt_base_addr_l = cpu_to_be32(mtt_addr & 0xffffffff);
+
+ err = mlx4_MODIFY_CQ(dev, mailbox, cq->cqn, 1);
+
+ mlx4_free_cmd_mailbox(dev, mailbox);
+ return err;
+}
+EXPORT_SYMBOL_GPL(mlx4_cq_resize);
+
int mlx4_cq_alloc(struct mlx4_dev *dev, int nent, struct mlx4_mtt *mtt,
struct mlx4_uar *uar, u64 db_rec, struct mlx4_cq *cq)
{
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index 9c36c20..e141a15 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -202,7 +202,10 @@
break;
case MLX4_EVENT_TYPE_PORT_CHANGE:
- mlx4_dispatch_event(dev, eqe->type, eqe->subtype,
+ mlx4_dispatch_event(dev,
+ eqe->subtype == MLX4_PORT_CHANGE_SUBTYPE_ACTIVE ?
+ MLX4_DEV_EVENT_PORT_UP :
+ MLX4_DEV_EVENT_PORT_DOWN,
be32_to_cpu(eqe->event.port_change.port) >> 28);
break;
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index 61dc495..d82f275 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -133,6 +133,7 @@
#define QUERY_DEV_CAP_MAX_AV_OFFSET 0x27
#define QUERY_DEV_CAP_MAX_REQ_QP_OFFSET 0x29
#define QUERY_DEV_CAP_MAX_RES_QP_OFFSET 0x2b
+#define QUERY_DEV_CAP_MAX_GSO_OFFSET 0x2d
#define QUERY_DEV_CAP_MAX_RDMA_OFFSET 0x2f
#define QUERY_DEV_CAP_RSZ_SRQ_OFFSET 0x33
#define QUERY_DEV_CAP_ACK_DELAY_OFFSET 0x35
@@ -215,6 +216,13 @@
dev_cap->max_requester_per_qp = 1 << (field & 0x3f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_RES_QP_OFFSET);
dev_cap->max_responder_per_qp = 1 << (field & 0x3f);
+ MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_GSO_OFFSET);
+ field &= 0x1f;
+ if (!field)
+ dev_cap->max_gso_sz = 0;
+ else
+ dev_cap->max_gso_sz = 1 << field;
+
MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_RDMA_OFFSET);
dev_cap->max_rdma_global = 1 << (field & 0x3f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_ACK_DELAY_OFFSET);
@@ -377,6 +385,7 @@
dev_cap->max_sq_desc_sz, dev_cap->max_sq_sg);
mlx4_dbg(dev, "Max RQ desc size: %d, max RQ S/G: %d\n",
dev_cap->max_rq_desc_sz, dev_cap->max_rq_sg);
+ mlx4_dbg(dev, "Max GSO size: %d\n", dev_cap->max_gso_sz);
dump_dev_cap_flags(dev, dev_cap->flags);
@@ -696,6 +705,10 @@
/* Check port for UD address vector: */
*(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1);
+ /* Enable IPoIB checksumming if we can: */
+ if (dev->caps.flags & MLX4_DEV_CAP_FLAG_IPOIB_CSUM)
+ *(inbox + INIT_HCA_FLAGS_OFFSET / 4) |= cpu_to_be32(1 << 3);
+
/* QPC/EEC/CQC/EQC/RDMARC attributes */
MLX4_PUT(inbox, param->qpc_base, INIT_HCA_QPC_BASE_OFFSET);
diff --git a/drivers/net/mlx4/fw.h b/drivers/net/mlx4/fw.h
index e16dec8..306cb9b 100644
--- a/drivers/net/mlx4/fw.h
+++ b/drivers/net/mlx4/fw.h
@@ -96,6 +96,7 @@
u8 bmme_flags;
u32 reserved_lkey;
u64 max_icm_sz;
+ int max_gso_sz;
};
struct mlx4_adapter {
diff --git a/drivers/net/mlx4/intf.c b/drivers/net/mlx4/intf.c
index be5d9e9..4a6c4d5 100644
--- a/drivers/net/mlx4/intf.c
+++ b/drivers/net/mlx4/intf.c
@@ -30,8 +30,6 @@
* SOFTWARE.
*/
-#include <linux/mlx4/driver.h>
-
#include "mlx4.h"
struct mlx4_device_context {
@@ -113,8 +111,7 @@
}
EXPORT_SYMBOL_GPL(mlx4_unregister_interface);
-void mlx4_dispatch_event(struct mlx4_dev *dev, enum mlx4_event type,
- int subtype, int port)
+void mlx4_dispatch_event(struct mlx4_dev *dev, enum mlx4_dev_event type, int port)
{
struct mlx4_priv *priv = mlx4_priv(dev);
struct mlx4_device_context *dev_ctx;
@@ -124,8 +121,7 @@
list_for_each_entry(dev_ctx, &priv->ctx_list, list)
if (dev_ctx->intf->event)
- dev_ctx->intf->event(dev, dev_ctx->context, type,
- subtype, port);
+ dev_ctx->intf->event(dev, dev_ctx->context, type, port);
spin_unlock_irqrestore(&priv->ctx_lock, flags);
}
diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 08bfc13..49a4aca 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -76,7 +76,7 @@
DRV_VERSION " (" DRV_RELDATE ")\n";
static struct mlx4_profile default_profile = {
- .num_qp = 1 << 16,
+ .num_qp = 1 << 17,
.num_srq = 1 << 16,
.rdmarc_per_qp = 1 << 4,
.num_cq = 1 << 16,
@@ -159,6 +159,7 @@
dev->caps.page_size_cap = ~(u32) (dev_cap->min_page_sz - 1);
dev->caps.flags = dev_cap->flags;
dev->caps.stat_rate_support = dev_cap->stat_rate_support;
+ dev->caps.max_gso_sz = dev_cap->max_gso_sz;
return 0;
}
@@ -735,8 +736,7 @@
}
/*
- * Check for BARs. We expect 0: 1MB, 2: 8MB, 4: DDR (may not
- * be present)
+ * Check for BARs. We expect 0: 1MB
*/
if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM) ||
pci_resource_len(pdev, 0) != 1 << 20) {
diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c
index a99e772..57f7f1f 100644
--- a/drivers/net/mlx4/mcg.c
+++ b/drivers/net/mlx4/mcg.c
@@ -190,10 +190,6 @@
}
index += dev->caps.num_mgms;
- err = mlx4_READ_MCG(dev, index, mailbox);
- if (err)
- goto out;
-
memset(mgm, 0, sizeof *mgm);
memcpy(mgm->gid, gid, 16);
}
@@ -301,12 +297,10 @@
mgm->qp[loc] = mgm->qp[i - 1];
mgm->qp[i - 1] = 0;
- err = mlx4_WRITE_MCG(dev, index, mailbox);
- if (err)
+ if (i != 1) {
+ err = mlx4_WRITE_MCG(dev, index, mailbox);
goto out;
-
- if (i != 1)
- goto out;
+ }
if (prev == -1) {
/* Remove entry from MGM */
diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h
index 53a1cdd..7333681 100644
--- a/drivers/net/mlx4/mlx4.h
+++ b/drivers/net/mlx4/mlx4.h
@@ -42,6 +42,7 @@
#include <linux/timer.h>
#include <linux/mlx4/device.h>
+#include <linux/mlx4/driver.h>
#include <linux/mlx4/doorbell.h>
#define DRV_NAME "mlx4_core"
@@ -313,8 +314,7 @@
int mlx4_restart_one(struct pci_dev *pdev);
int mlx4_register_device(struct mlx4_dev *dev);
void mlx4_unregister_device(struct mlx4_dev *dev);
-void mlx4_dispatch_event(struct mlx4_dev *dev, enum mlx4_event type,
- int subtype, int port);
+void mlx4_dispatch_event(struct mlx4_dev *dev, enum mlx4_dev_event type, int port);
struct mlx4_dev_cap;
struct mlx4_init_hca_param;
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index 501e451..665341e 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -730,7 +730,7 @@
static struct console netconsole = {
.name = "netcon",
- .flags = CON_ENABLED | CON_PRINTBUFFER,
+ .flags = CON_ENABLED,
.write = write_msg,
};
@@ -749,6 +749,9 @@
err = PTR_ERR(nt);
goto fail;
}
+ /* Dump existing printks when we register */
+ netconsole.flags |= CON_PRINTBUFFER;
+
spin_lock_irqsave(&target_list_lock, flags);
list_add(&nt->list, &target_list);
spin_unlock_irqrestore(&target_list_lock, flags);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3353991..32a8503 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -211,8 +211,6 @@
}
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
- int temp;
-
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
diff --git a/drivers/net/plip.c b/drivers/net/plip.c
index fee3d7b..1e96542 100644
--- a/drivers/net/plip.c
+++ b/drivers/net/plip.c
@@ -903,17 +903,18 @@
struct net_local *nl;
struct plip_local *rcv;
unsigned char c0;
+ unsigned long flags;
nl = netdev_priv(dev);
rcv = &nl->rcv_data;
- spin_lock_irq (&nl->lock);
+ spin_lock_irqsave (&nl->lock, flags);
c0 = read_status(dev);
if ((c0 & 0xf8) != 0xc0) {
if ((dev->irq != -1) && (net_debug > 1))
printk(KERN_DEBUG "%s: spurious interrupt\n", dev->name);
- spin_unlock_irq (&nl->lock);
+ spin_unlock_irqrestore (&nl->lock, flags);
return;
}
@@ -942,7 +943,7 @@
break;
}
- spin_unlock_irq(&nl->lock);
+ spin_unlock_irqrestore(&nl->lock, flags);
}
static int
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index ddbc6e4..c16de51 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -512,13 +512,18 @@
data, len);
memset(ie_info, 0, sizeof(struct ie_info));
- while (0 < data_left) {
+ while (2 <= data_left) {
item_id = *pos++;
item_len = *pos++;
+ data_left -= 2;
+
+ if (data_left < item_len)
+ break;
switch (item_id) {
case MFIE_TYPE_GENERIC:
- if (!memcmp(pos, wpa_oui, OUI_LEN) &&
+ if ((OUI_LEN + 1 <= item_len) &&
+ !memcmp(pos, wpa_oui, OUI_LEN) &&
pos[OUI_LEN] == 0x01) {
ie_info->wpa.data = pos - 2;
ie_info->wpa.len = item_len + 2;
@@ -535,7 +540,7 @@
break;
}
pos += item_len;
- data_left -= item_len + 2;
+ data_left -= item_len;
}
pr_debug("%s: wpa=%p,%d wpa2=%p,%d\n", __func__,
ie_info->wpa.data, ie_info->wpa.len,
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 3c915b8..c082cf0 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -84,7 +84,7 @@
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.26.15-2"
+#define DRV_VERSION "2.0.26.20"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 37b4239..15fcee5 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -1446,6 +1446,7 @@
}
pci_set_drvdata(pdev, dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
#if SC92031_USE_BAR == 0
dev->mem_start = pci_resource_start(pdev, SC92031_USE_BAR);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 54c6626..f226bca 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -154,6 +154,7 @@
"EC", /* 0xb6 */
"FE", /* 0xb7 */
"FE+", /* 0xb8 */
+ "Supreme", /* 0xb9 */
};
static void sky2_set_multicast(struct net_device *dev);
@@ -4329,10 +4330,14 @@
if (!hw)
return 0;
+ del_timer_sync(&hw->watchdog_timer);
+ cancel_work_sync(&hw->restart_work);
+
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
struct sky2_port *sky2 = netdev_priv(dev);
+ netif_device_detach(dev);
if (netif_running(dev))
sky2_down(dev);
@@ -4383,6 +4388,8 @@
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
+
+ netif_device_attach(dev);
if (netif_running(dev)) {
err = sky2_up(dev);
if (err) {
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 4020e9e..63a54e2 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1326,9 +1326,11 @@
SMC_SET_INT_MASK(mask);
spin_unlock(&lp->lock);
+#ifndef CONFIG_NET_POLL_CONTROLLER
if (timeout == MAX_IRQ_LOOPS)
PRINTK("%s: spurious interrupt (mask = 0x%02x)\n",
dev->name, mask);
+#endif
DBG(3, "%s: Interrupt done (%d loops)\n",
dev->name, MAX_IRQ_LOOPS - timeout);
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 98a832a..51d4134 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -92,14 +92,14 @@
#define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l)
# endif
/* check if the mac in reg is valid */
-#define SMC_GET_MAC_ADDR(lp, addr) \
+#define SMC_GET_MAC_ADDR(addr) \
do { \
unsigned int __v; \
- __v = SMC_inw(ioaddr, ADDR0_REG(lp)); \
+ __v = SMC_inw(ioaddr, ADDR0_REG); \
addr[0] = __v; addr[1] = __v >> 8; \
- __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \
+ __v = SMC_inw(ioaddr, ADDR1_REG); \
addr[2] = __v; addr[3] = __v >> 8; \
- __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \
+ __v = SMC_inw(ioaddr, ADDR2_REG); \
addr[4] = __v; addr[5] = __v >> 8; \
if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \
random_ether_addr(addr); \
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index c49214f..7b7b171 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -1472,13 +1472,12 @@
#ifndef final_version /* Remove after testing. */
/* You will want this info for the initial debug. */
if (debug > 5) {
- DECLARE_MAC_BUF(mac);
- DECLARE_MAC_BUF(mac2);
-
- printk(KERN_DEBUG " Rx data %s %s"
+ printk(KERN_DEBUG " Rx data " MAC_FMT " " MAC_FMT
" %2.2x%2.2x.\n",
- print_mac(mac, &skb->data[0]),
- print_mac(mac2, &skb->data[6]),
+ skb->data[0], skb->data[1], skb->data[2],
+ skb->data[3], skb->data[4], skb->data[5],
+ skb->data[6], skb->data[7], skb->data[8],
+ skb->data[9], skb->data[10], skb->data[11],
skb->data[12], skb->data[13]);
}
#endif
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f9ef8bd..96043c5 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -64,8 +64,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.88"
-#define DRV_MODULE_RELDATE "March 20, 2008"
+#define DRV_MODULE_VERSION "3.90"
+#define DRV_MODULE_RELDATE "April 12, 2008"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -804,6 +804,12 @@
return ret;
}
+static void tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
+{
+ tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
+ tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
+}
+
static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
{
u32 phy;
@@ -886,6 +892,49 @@
return 0;
}
+static void tg3_phy_apply_otp(struct tg3 *tp)
+{
+ u32 otp, phy;
+
+ if (!tp->phy_otp)
+ return;
+
+ otp = tp->phy_otp;
+
+ /* Enable SM_DSP clock and tx 6dB coding. */
+ phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
+ MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
+ MII_TG3_AUXCTL_ACTL_TX_6DB;
+ tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+
+ phy = ((otp & TG3_OTP_AGCTGT_MASK) >> TG3_OTP_AGCTGT_SHIFT);
+ phy |= MII_TG3_DSP_TAP1_AGCTGT_DFLT;
+ tg3_phydsp_write(tp, MII_TG3_DSP_TAP1, phy);
+
+ phy = ((otp & TG3_OTP_HPFFLTR_MASK) >> TG3_OTP_HPFFLTR_SHIFT) |
+ ((otp & TG3_OTP_HPFOVER_MASK) >> TG3_OTP_HPFOVER_SHIFT);
+ tg3_phydsp_write(tp, MII_TG3_DSP_AADJ1CH0, phy);
+
+ phy = ((otp & TG3_OTP_LPFDIS_MASK) >> TG3_OTP_LPFDIS_SHIFT);
+ phy |= MII_TG3_DSP_AADJ1CH3_ADCCKADJ;
+ tg3_phydsp_write(tp, MII_TG3_DSP_AADJ1CH3, phy);
+
+ phy = ((otp & TG3_OTP_VDAC_MASK) >> TG3_OTP_VDAC_SHIFT);
+ tg3_phydsp_write(tp, MII_TG3_DSP_EXP75, phy);
+
+ phy = ((otp & TG3_OTP_10BTAMP_MASK) >> TG3_OTP_10BTAMP_SHIFT);
+ tg3_phydsp_write(tp, MII_TG3_DSP_EXP96, phy);
+
+ phy = ((otp & TG3_OTP_ROFF_MASK) >> TG3_OTP_ROFF_SHIFT) |
+ ((otp & TG3_OTP_RCOFF_MASK) >> TG3_OTP_RCOFF_SHIFT);
+ tg3_phydsp_write(tp, MII_TG3_DSP_EXP97, phy);
+
+ /* Turn off SM_DSP clock. */
+ phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
+ MII_TG3_AUXCTL_ACTL_TX_6DB;
+ tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+}
+
static int tg3_wait_macro_done(struct tg3 *tp)
{
int limit = 100;
@@ -1073,6 +1122,7 @@
*/
static int tg3_phy_reset(struct tg3 *tp)
{
+ u32 cpmuctrl;
u32 phy_status;
int err;
@@ -1102,10 +1152,28 @@
goto out;
}
+ cpmuctrl = 0;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+ GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) {
+ cpmuctrl = tr32(TG3_CPMU_CTRL);
+ if (cpmuctrl & CPMU_CTRL_GPHY_10MB_RXONLY)
+ tw32(TG3_CPMU_CTRL,
+ cpmuctrl & ~CPMU_CTRL_GPHY_10MB_RXONLY);
+ }
+
err = tg3_bmcr_reset(tp);
if (err)
return err;
+ if (cpmuctrl & CPMU_CTRL_GPHY_10MB_RXONLY) {
+ u32 phy;
+
+ phy = MII_TG3_DSP_EXP8_AEDW | MII_TG3_DSP_EXP8_REJ2MHz;
+ tg3_phydsp_write(tp, MII_TG3_DSP_EXP8, phy);
+
+ tw32(TG3_CPMU_CTRL, cpmuctrl);
+ }
+
if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
u32 val;
@@ -1124,6 +1192,8 @@
MII_TG3_MISC_SHDW_APD_WKTM_84MS);
}
+ tg3_phy_apply_otp(tp);
+
out:
if (tp->tg3_flags2 & TG3_FLG2_PHY_ADC_BUG) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
@@ -9464,7 +9534,8 @@
if (err)
return TG3_LOOPBACK_FAILED;
- if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) {
int i;
u32 status;
@@ -9481,17 +9552,23 @@
if (status != CPMU_MUTEX_GNT_DRIVER)
return TG3_LOOPBACK_FAILED;
- /* Turn off power management based on link speed. */
+ /* Turn off link-based power management. */
cpmuctrl = tr32(TG3_CPMU_CTRL);
- tw32(TG3_CPMU_CTRL,
- cpmuctrl & ~(CPMU_CTRL_LINK_SPEED_MODE |
- CPMU_CTRL_LINK_AWARE_MODE));
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+ GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX)
+ tw32(TG3_CPMU_CTRL,
+ cpmuctrl & ~(CPMU_CTRL_LINK_SPEED_MODE |
+ CPMU_CTRL_LINK_AWARE_MODE));
+ else
+ tw32(TG3_CPMU_CTRL,
+ cpmuctrl & ~CPMU_CTRL_LINK_AWARE_MODE);
}
if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
err |= TG3_MAC_LOOPBACK_FAILED;
- if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) {
tw32(TG3_CPMU_CTRL, cpmuctrl);
/* Release the mutex */
@@ -10724,9 +10801,8 @@
tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL)
tp->led_ctrl = LED_CTRL_MODE_PHY_2;
- if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5784_A1)
- tp->led_ctrl = LED_CTRL_MODE_MAC;
+ if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX)
+ tp->led_ctrl = LED_CTRL_MODE_PHY_1;
if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) {
tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
@@ -10773,6 +10849,55 @@
}
}
+static int __devinit tg3_issue_otp_command(struct tg3 *tp, u32 cmd)
+{
+ int i;
+ u32 val;
+
+ tw32(OTP_CTRL, cmd | OTP_CTRL_OTP_CMD_START);
+ tw32(OTP_CTRL, cmd);
+
+ /* Wait for up to 1 ms for command to execute. */
+ for (i = 0; i < 100; i++) {
+ val = tr32(OTP_STATUS);
+ if (val & OTP_STATUS_CMD_DONE)
+ break;
+ udelay(10);
+ }
+
+ return (val & OTP_STATUS_CMD_DONE) ? 0 : -EBUSY;
+}
+
+/* Read the gphy configuration from the OTP region of the chip. The gphy
+ * configuration is a 32-bit value that straddles the alignment boundary.
+ * We do two 32-bit reads and then shift and merge the results.
+ */
+static u32 __devinit tg3_read_otp_phycfg(struct tg3 *tp)
+{
+ u32 bhalf_otp, thalf_otp;
+
+ tw32(OTP_MODE, OTP_MODE_OTP_THRU_GRC);
+
+ if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_INIT))
+ return 0;
+
+ tw32(OTP_ADDRESS, OTP_ADDRESS_MAGIC1);
+
+ if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_READ))
+ return 0;
+
+ thalf_otp = tr32(OTP_READ_DATA);
+
+ tw32(OTP_ADDRESS, OTP_ADDRESS_MAGIC2);
+
+ if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_READ))
+ return 0;
+
+ bhalf_otp = tr32(OTP_READ_DATA);
+
+ return ((thalf_otp & 0x0000ffff) << 16) | (bhalf_otp >> 16);
+}
+
static int __devinit tg3_phy_probe(struct tg3 *tp)
{
u32 hw_phy_id_1, hw_phy_id_2;
@@ -11586,6 +11711,13 @@
tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
}
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+ GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) {
+ tp->phy_otp = tg3_read_otp_phycfg(tp);
+ if (tp->phy_otp == 0)
+ tp->phy_otp = TG3_OTP_DEFAULT;
+ }
+
tp->coalesce_mode = 0;
if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX &&
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX)
@@ -12446,7 +12578,8 @@
const struct pci_device_id *ent)
{
static int tg3_version_printed = 0;
- unsigned long tg3reg_base, tg3reg_len;
+ resource_size_t tg3reg_base;
+ unsigned long tg3reg_len;
struct net_device *dev;
struct tg3 *tp;
int err, pm_cap;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 3938eb3..c1075a7 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -138,6 +138,8 @@
#define CHIPREV_5704_BX 0x21
#define CHIPREV_5750_AX 0x40
#define CHIPREV_5750_BX 0x41
+#define CHIPREV_5784_AX 0x57840
+#define CHIPREV_5761_AX 0x57610
#define GET_METAL_REV(CHIP_REV_ID) ((CHIP_REV_ID) & 0xff)
#define METAL_REV_A0 0x00
#define METAL_REV_A1 0x01
@@ -866,6 +868,7 @@
#define CPMU_CTRL_LINK_IDLE_MODE 0x00000200
#define CPMU_CTRL_LINK_AWARE_MODE 0x00000400
#define CPMU_CTRL_LINK_SPEED_MODE 0x00004000
+#define CPMU_CTRL_GPHY_10MB_RXONLY 0x00010000
#define TG3_CPMU_LSPD_10MB_CLK 0x00003604
#define CPMU_LSPD_10MB_MACCLK_MASK 0x001f0000
#define CPMU_LSPD_10MB_MACCLK_6_25 0x00130000
@@ -1559,7 +1562,24 @@
/* 0x702c unused */
#define NVRAM_ADDR_LOCKOUT 0x00007030
-/* 0x7034 --> 0x7c00 unused */
+/* 0x7034 --> 0x7500 unused */
+
+#define OTP_MODE 0x00007500
+#define OTP_MODE_OTP_THRU_GRC 0x00000001
+#define OTP_CTRL 0x00007504
+#define OTP_CTRL_OTP_PROG_ENABLE 0x00200000
+#define OTP_CTRL_OTP_CMD_READ 0x00000000
+#define OTP_CTRL_OTP_CMD_INIT 0x00000008
+#define OTP_CTRL_OTP_CMD_START 0x00000001
+#define OTP_STATUS 0x00007508
+#define OTP_STATUS_CMD_DONE 0x00000001
+#define OTP_ADDRESS 0x0000750c
+#define OTP_ADDRESS_MAGIC1 0x000000a0
+#define OTP_ADDRESS_MAGIC2 0x00000080
+/* 0x7510 unused */
+
+#define OTP_READ_DATA 0x00007514
+/* 0x7518 --> 0x7c04 unused */
#define PCIE_TRANSACTION_CFG 0x00007c04
#define PCIE_TRANS_CFG_1SHOT_MSI 0x20000000
@@ -1568,6 +1588,28 @@
#define PCIE_PWR_MGMT_THRESH 0x00007d28
#define PCIE_PWR_MGMT_L1_THRESH_MSK 0x0000ff00
+
+/* OTP bit definitions */
+#define TG3_OTP_AGCTGT_MASK 0x000000e0
+#define TG3_OTP_AGCTGT_SHIFT 1
+#define TG3_OTP_HPFFLTR_MASK 0x00000300
+#define TG3_OTP_HPFFLTR_SHIFT 1
+#define TG3_OTP_HPFOVER_MASK 0x00000400
+#define TG3_OTP_HPFOVER_SHIFT 1
+#define TG3_OTP_LPFDIS_MASK 0x00000800
+#define TG3_OTP_LPFDIS_SHIFT 11
+#define TG3_OTP_VDAC_MASK 0xff000000
+#define TG3_OTP_VDAC_SHIFT 24
+#define TG3_OTP_10BTAMP_MASK 0x0000f000
+#define TG3_OTP_10BTAMP_SHIFT 8
+#define TG3_OTP_ROFF_MASK 0x00e00000
+#define TG3_OTP_ROFF_SHIFT 11
+#define TG3_OTP_RCOFF_MASK 0x001c0000
+#define TG3_OTP_RCOFF_SHIFT 16
+
+#define TG3_OTP_DEFAULT 0x286c1640
+
+
#define TG3_EEPROM_MAGIC 0x669955aa
#define TG3_EEPROM_MAGIC_FW 0xa5000000
#define TG3_EEPROM_MAGIC_FW_MSK 0xff000000
@@ -1705,15 +1747,31 @@
#define MII_TG3_DSP_RW_PORT 0x15 /* DSP coefficient read/write port */
-#define MII_TG3_DSP_ADDRESS 0x17 /* DSP address register */
#define MII_TG3_EPHY_PTEST 0x17 /* 5906 PHY register */
+#define MII_TG3_DSP_ADDRESS 0x17 /* DSP address register */
+
+#define MII_TG3_DSP_TAP1 0x0001
+#define MII_TG3_DSP_TAP1_AGCTGT_DFLT 0x0007
+#define MII_TG3_DSP_AADJ1CH0 0x001f
+#define MII_TG3_DSP_AADJ1CH3 0x601f
+#define MII_TG3_DSP_AADJ1CH3_ADCCKADJ 0x0002
+#define MII_TG3_DSP_EXP8 0x0708
+#define MII_TG3_DSP_EXP8_REJ2MHz 0x0001
+#define MII_TG3_DSP_EXP8_AEDW 0x0200
+#define MII_TG3_DSP_EXP75 0x0f75
+#define MII_TG3_DSP_EXP96 0x0f96
+#define MII_TG3_DSP_EXP97 0x0f97
#define MII_TG3_AUX_CTRL 0x18 /* auxilliary control register */
#define MII_TG3_AUXCTL_MISC_WREN 0x8000
#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX 0x0200
#define MII_TG3_AUXCTL_MISC_RDSEL_MISC 0x7000
-#define MII_TG3_AUXCTL_SHDWSEL_MISC 0x0007
+#define MII_TG3_AUXCTL_SHDWSEL_MISC 0x0007
+
+#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA 0x0800
+#define MII_TG3_AUXCTL_ACTL_TX_6DB 0x0400
+#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL 0x0000
#define MII_TG3_AUX_STAT 0x19 /* auxilliary status register */
#define MII_TG3_AUX_STAT_LPASS 0x0004
@@ -1743,6 +1801,20 @@
#define MII_TG3_INT_DUPLEXCHG 0x0008
#define MII_TG3_INT_ANEG_PAGE_RX 0x0400
+#define MII_TG3_MISC_SHDW 0x1c
+#define MII_TG3_MISC_SHDW_WREN 0x8000
+#define MII_TG3_MISC_SHDW_SCR5_SEL 0x1400
+#define MII_TG3_MISC_SHDW_APD_SEL 0x2800
+
+#define MII_TG3_MISC_SHDW_SCR5_C125OE 0x0001
+#define MII_TG3_MISC_SHDW_SCR5_DLLAPD 0x0002
+#define MII_TG3_MISC_SHDW_SCR5_SDTL 0x0004
+#define MII_TG3_MISC_SHDW_SCR5_DLPTLM 0x0008
+#define MII_TG3_MISC_SHDW_SCR5_LPED 0x0010
+
+#define MII_TG3_MISC_SHDW_APD_WKTM_84MS 0x0001
+#define MII_TG3_MISC_SHDW_APD_ENABLE 0x0020
+
#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */
#define MII_TG3_EPHY_SHADOW_EN 0x80
@@ -2473,6 +2545,7 @@
#define PHY_REV_BCM5411_X0 0x1 /* Found on Netgear GA302T */
u32 led_ctrl;
+ u32 phy_otp;
u16 pci_cmd;
char board_part_number[24];
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 433c994..0ab51a0 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -117,7 +117,7 @@
* Official releases will only have an a.b.c version number format.
*/
-static char version[] __devinitdata =
+static char version[] =
"Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ;
static char *open_maj_error[] = {"No error", "Lobe Media Test", "Physical Insertion",
@@ -290,7 +290,7 @@
return i;
}
-static int __devinit olympic_init(struct net_device *dev)
+static int olympic_init(struct net_device *dev)
{
struct olympic_private *olympic_priv;
u8 __iomem *olympic_mmio, *init_srb,*adapter_addr;
@@ -434,7 +434,7 @@
}
-static int __devinit olympic_open(struct net_device *dev)
+static int olympic_open(struct net_device *dev)
{
struct olympic_private *olympic_priv=netdev_priv(dev);
u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb;
@@ -1438,13 +1438,18 @@
if (olympic_priv->olympic_network_monitor) {
struct trh_hdr *mac_hdr;
- DECLARE_MAC_BUF(mac);
printk(KERN_WARNING "%s: Received MAC Frame, details: \n",dev->name);
mac_hdr = tr_hdr(mac_frame);
- printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %s\n",
- dev->name, print_mac(mac, mac_hdr->daddr));
- printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %s\n",
- dev->name, print_mac(mac, mac_hdr->saddr));
+ printk(KERN_WARNING "%s: MAC Frame Dest. Addr: "
+ MAC_FMT " \n", dev->name,
+ mac_hdr->daddr[0], mac_hdr->daddr[1],
+ mac_hdr->daddr[2], mac_hdr->daddr[3],
+ mac_hdr->daddr[4], mac_hdr->daddr[5]);
+ printk(KERN_WARNING "%s: MAC Frame Srce. Addr: "
+ MAC_FMT " \n", dev->name,
+ mac_hdr->saddr[0], mac_hdr->saddr[1],
+ mac_hdr->saddr[2], mac_hdr->saddr[3],
+ mac_hdr->saddr[4], mac_hdr->saddr[5]);
}
netif_rx(mac_frame);
dev->last_rx = jiffies;
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 206918b..da2206f 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -343,6 +343,12 @@
void __iomem *ee_addr = tp->base_addr + CSR9;
int read_cmd = location | (EE_READ_CMD << addr_len);
+ /* If location is past the end of what we can address, don't
+ * read some other location (ie truncate). Just return zero.
+ */
+ if (location > (1 << addr_len) - 1)
+ return 0;
+
iowrite32(EE_ENB & ~EE_CS, ee_addr);
iowrite32(EE_ENB, ee_addr);
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index ed600bf..82f404b 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1437,6 +1437,7 @@
EEPROM.
*/
ee_data = tp->eeprom;
+ memset(ee_data, 0, sizeof(tp->eeprom));
sum = 0;
if (chip_idx == LC82C168) {
for (i = 0; i < 3; i++) {
@@ -1458,8 +1459,12 @@
/* A serial EEPROM interface, we read now and sort it out later. */
int sa_offset = 0;
int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6;
+ int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16);
- for (i = 0; i < sizeof(tp->eeprom); i+=2) {
+ if (ee_max_addr > sizeof(tp->eeprom))
+ ee_max_addr = sizeof(tp->eeprom);
+
+ for (i = 0; i < ee_max_addr ; i += sizeof(u16)) {
u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size);
ee_data[i] = data & 0xff;
ee_data[i + 1] = data >> 8;
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 7b816a0..5b5d875 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -67,10 +67,43 @@
#include <asm/system.h>
#include <asm/uaccess.h>
+/* Uncomment to enable debugging */
+/* #define TUN_DEBUG 1 */
+
#ifdef TUN_DEBUG
static int debug;
+
+#define DBG if(tun->debug)printk
+#define DBG1 if(debug==2)printk
+#else
+#define DBG( a... )
+#define DBG1( a... )
#endif
+struct tun_struct {
+ struct list_head list;
+ unsigned long flags;
+ int attached;
+ uid_t owner;
+ gid_t group;
+
+ wait_queue_head_t read_wait;
+ struct sk_buff_head readq;
+
+ struct net_device *dev;
+
+ struct fasync_struct *fasync;
+
+ unsigned long if_flags;
+ u8 dev_addr[ETH_ALEN];
+ u32 chr_filter[2];
+ u32 net_filter[2];
+
+#ifdef TUN_DEBUG
+ int debug;
+#endif
+};
+
/* Network device part of the driver */
static LIST_HEAD(tun_dev_list);
@@ -253,8 +286,11 @@
return -EFAULT;
}
- if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV)
+ if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) {
align = NET_IP_ALIGN;
+ if (unlikely(len < ETH_HLEN))
+ return -EINVAL;
+ }
if (!(skb = alloc_skb(len + align, GFP_KERNEL))) {
tun->dev->stats.rx_dropped++;
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 8cc3166..0ee4c16 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3833,6 +3833,7 @@
struct device_node *phy;
int err, ucc_num, max_speed = 0;
const phandle *ph;
+ const u32 *fixed_link;
const unsigned int *prop;
const char *sprop;
const void *mac_addr;
@@ -3923,18 +3924,38 @@
ug_info->uf_info.regs = res.start;
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
+ fixed_link = of_get_property(np, "fixed-link", NULL);
+ if (fixed_link) {
+ ug_info->mdio_bus = 0;
+ ug_info->phy_address = fixed_link[0];
+ phy = NULL;
+ } else {
+ ph = of_get_property(np, "phy-handle", NULL);
+ phy = of_find_node_by_phandle(*ph);
- ph = of_get_property(np, "phy-handle", NULL);
- phy = of_find_node_by_phandle(*ph);
+ if (phy == NULL)
+ return -ENODEV;
- if (phy == NULL)
- return -ENODEV;
+ /* set the PHY address */
+ prop = of_get_property(phy, "reg", NULL);
+ if (prop == NULL)
+ return -1;
+ ug_info->phy_address = *prop;
- /* set the PHY address */
- prop = of_get_property(phy, "reg", NULL);
- if (prop == NULL)
- return -1;
- ug_info->phy_address = *prop;
+ /* Set the bus id */
+ mdio = of_get_parent(phy);
+
+ if (mdio == NULL)
+ return -1;
+
+ err = of_address_to_resource(mdio, 0, &res);
+ of_node_put(mdio);
+
+ if (err)
+ return -1;
+
+ ug_info->mdio_bus = res.start;
+ }
/* get the phy interface type, or default to MII */
prop = of_get_property(np, "phy-connection-type", NULL);
@@ -3979,20 +4000,6 @@
ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
}
- /* Set the bus id */
- mdio = of_get_parent(phy);
-
- if (mdio == NULL)
- return -1;
-
- err = of_address_to_resource(mdio, 0, &res);
- of_node_put(mdio);
-
- if (err)
- return -1;
-
- ug_info->mdio_bus = res.start;
-
if (netif_msg_probe(&debug))
printk(KERN_INFO "ucc_geth: UCC%1d at 0x%8x (irq = %d) \n",
ug_info->uf_info.ucc_num + 1, ug_info->uf_info.regs,
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index a12c9c4..0604f3f 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -129,7 +129,7 @@
config USB_NET_AX8817X
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
- depends on USB_USBNET && NET_ETHERNET
+ depends on USB_USBNET
select CRC32
default y
help
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 0343b00..01660f6 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -354,7 +354,7 @@
struct dev_mc_list *mc_list = net->mc_list;
int i;
- for (i = 0; i < net->mc_count; i++) {
+ for (i = 0; i < net->mc_count; i++, mc_list = mc_list->next) {
u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
hashes[crc >> 3] |= 1 << (crc & 0x7);
}
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index d1ed68a..b588c89 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1128,12 +1128,8 @@
{
pegasus_t *pegasus;
- if (in_atomic())
- return 0;
-
pegasus = netdev_priv(dev);
mii_ethtool_gset(&pegasus->mii, ecmd);
-
return 0;
}
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index b58472c..555b70c 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -234,11 +234,12 @@
struct scatterlist sg[1+MAX_SKB_FRAGS];
struct virtio_net_hdr *hdr;
const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
- DECLARE_MAC_BUF(mac);
sg_init_table(sg, 1+MAX_SKB_FRAGS);
- pr_debug("%s: xmit %p %s\n", dev->name, skb, print_mac(mac, dest));
+ pr_debug("%s: xmit %p " MAC_FMT "\n", dev->name, skb,
+ dest[0], dest[1], dest[2],
+ dest[3], dest[4], dest[5]);
/* Encode metadata header at front. */
hdr = skb_vnet_hdr(skb);
@@ -284,7 +285,6 @@
/* Activate callback for using skbs: if this returns false it
* means some were used in the meantime. */
if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
- printk("Unlikely: restart svq race\n");
vi->svq->vq_ops->disable_cb(vi->svq);
netif_start_queue(dev);
goto again;
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index a3df09e..8005dd1 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -150,9 +150,13 @@
config HDLC_PPP
tristate "Synchronous Point-to-Point Protocol (PPP) support"
- depends on HDLC
+ depends on HDLC && BROKEN
help
Generic HDLC driver supporting PPP over WAN connections.
+ This module is currently broken and will cause a kernel panic
+ when a device configured in PPP mode is activated.
+
+ It will be replaced by new PPP implementation in Linux 2.6.26.
If unsure, say N.
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index fb37b80..824df3b 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -58,7 +58,7 @@
struct net_device_stats stats; /* some statistics */
};
-static struct list_head lapbeth_devices = LIST_HEAD_INIT(lapbeth_devices);
+static LIST_HEAD(lapbeth_devices);
/* ------------------------------------------------------------------------ */
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index cfbc1a2..48e9124 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -373,10 +373,10 @@
dma_addr_t dmaaddr;
if (tx) {
- dmaaddr = dma_map_single(ring->dev->dev->dev,
+ dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
buf, len, DMA_TO_DEVICE);
} else {
- dmaaddr = dma_map_single(ring->dev->dev->dev,
+ dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
buf, len, DMA_FROM_DEVICE);
}
@@ -388,9 +388,10 @@
dma_addr_t addr, size_t len, int tx)
{
if (tx) {
- dma_unmap_single(ring->dev->dev->dev, addr, len, DMA_TO_DEVICE);
+ dma_unmap_single(ring->dev->dev->dma_dev,
+ addr, len, DMA_TO_DEVICE);
} else {
- dma_unmap_single(ring->dev->dev->dev,
+ dma_unmap_single(ring->dev->dev->dma_dev,
addr, len, DMA_FROM_DEVICE);
}
}
@@ -400,7 +401,7 @@
dma_addr_t addr, size_t len)
{
B43_WARN_ON(ring->tx);
- dma_sync_single_for_cpu(ring->dev->dev->dev,
+ dma_sync_single_for_cpu(ring->dev->dev->dma_dev,
addr, len, DMA_FROM_DEVICE);
}
@@ -409,7 +410,7 @@
dma_addr_t addr, size_t len)
{
B43_WARN_ON(ring->tx);
- dma_sync_single_for_device(ring->dev->dev->dev,
+ dma_sync_single_for_device(ring->dev->dev->dma_dev,
addr, len, DMA_FROM_DEVICE);
}
@@ -425,7 +426,7 @@
static int alloc_ringmemory(struct b43_dmaring *ring)
{
- struct device *dev = ring->dev->dev->dev;
+ struct device *dma_dev = ring->dev->dev->dma_dev;
gfp_t flags = GFP_KERNEL;
/* The specs call for 4K buffers for 30- and 32-bit DMA with 4K
@@ -439,7 +440,7 @@
*/
if (ring->type == B43_DMA_64BIT)
flags |= GFP_DMA;
- ring->descbase = dma_alloc_coherent(dev, B43_DMA_RINGMEMSIZE,
+ ring->descbase = dma_alloc_coherent(dma_dev, B43_DMA_RINGMEMSIZE,
&(ring->dmabase), flags);
if (!ring->descbase) {
b43err(ring->dev->wl, "DMA ringmemory allocation failed\n");
@@ -452,9 +453,9 @@
static void free_ringmemory(struct b43_dmaring *ring)
{
- struct device *dev = ring->dev->dev->dev;
+ struct device *dma_dev = ring->dev->dev->dma_dev;
- dma_free_coherent(dev, B43_DMA_RINGMEMSIZE,
+ dma_free_coherent(dma_dev, B43_DMA_RINGMEMSIZE,
ring->descbase, ring->dmabase);
}
@@ -619,6 +620,7 @@
}
if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
+ b43err(ring->dev->wl, "RX DMA buffer allocation failed\n");
dev_kfree_skb_any(skb);
return -EIO;
}
@@ -853,7 +855,7 @@
goto err_kfree_meta;
/* test for ability to dma to txhdr_cache */
- dma_test = dma_map_single(dev->dev->dev,
+ dma_test = dma_map_single(dev->dev->dma_dev,
ring->txhdr_cache,
b43_txhdr_size(dev),
DMA_TO_DEVICE);
@@ -868,17 +870,21 @@
if (!ring->txhdr_cache)
goto err_kfree_meta;
- dma_test = dma_map_single(dev->dev->dev,
+ dma_test = dma_map_single(dev->dev->dma_dev,
ring->txhdr_cache,
b43_txhdr_size(dev),
DMA_TO_DEVICE);
if (b43_dma_mapping_error(ring, dma_test,
- b43_txhdr_size(dev), 1))
+ b43_txhdr_size(dev), 1)) {
+
+ b43err(dev->wl,
+ "TXHDR DMA allocation failed\n");
goto err_kfree_txhdr_cache;
+ }
}
- dma_unmap_single(dev->dev->dev,
+ dma_unmap_single(dev->dev->dma_dev,
dma_test, b43_txhdr_size(dev),
DMA_TO_DEVICE);
}
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index b79a6bd..371e4a1 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -91,6 +91,8 @@
dev->conf.ConfigBase = parse.config.base;
dev->conf.Present = parse.config.rmask[0];
+ dev->conf.Attributes = CONF_ENABLE_IRQ;
+ dev->conf.IntType = INT_MEMORY_AND_IO;
dev->io.BasePort2 = 0;
dev->io.NumPorts2 = 0;
@@ -112,8 +114,8 @@
if (res != CS_SUCCESS)
goto err_disable;
- dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED;
- dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID;
+ dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+ dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
dev->irq.Handler = NULL; /* The handler is registered later. */
dev->irq.Instance = NULL;
res = pcmcia_request_irq(dev, &dev->irq);
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index e87b427..c990f87 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -393,11 +393,11 @@
dma_addr_t dmaaddr;
if (tx)
- dmaaddr = dma_map_single(ring->dev->dev->dev,
+ dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
buf, len,
DMA_TO_DEVICE);
else
- dmaaddr = dma_map_single(ring->dev->dev->dev,
+ dmaaddr = dma_map_single(ring->dev->dev->dma_dev,
buf, len,
DMA_FROM_DEVICE);
@@ -411,11 +411,11 @@
int tx)
{
if (tx)
- dma_unmap_single(ring->dev->dev->dev,
+ dma_unmap_single(ring->dev->dev->dma_dev,
addr, len,
DMA_TO_DEVICE);
else
- dma_unmap_single(ring->dev->dev->dev,
+ dma_unmap_single(ring->dev->dev->dma_dev,
addr, len,
DMA_FROM_DEVICE);
}
@@ -427,7 +427,7 @@
{
B43legacy_WARN_ON(ring->tx);
- dma_sync_single_for_cpu(ring->dev->dev->dev,
+ dma_sync_single_for_cpu(ring->dev->dev->dma_dev,
addr, len, DMA_FROM_DEVICE);
}
@@ -438,7 +438,7 @@
{
B43legacy_WARN_ON(ring->tx);
- dma_sync_single_for_device(ring->dev->dev->dev,
+ dma_sync_single_for_device(ring->dev->dev->dma_dev,
addr, len, DMA_FROM_DEVICE);
}
@@ -458,9 +458,9 @@
static int alloc_ringmemory(struct b43legacy_dmaring *ring)
{
- struct device *dev = ring->dev->dev->dev;
+ struct device *dma_dev = ring->dev->dev->dma_dev;
- ring->descbase = dma_alloc_coherent(dev, B43legacy_DMA_RINGMEMSIZE,
+ ring->descbase = dma_alloc_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE,
&(ring->dmabase), GFP_KERNEL);
if (!ring->descbase) {
b43legacyerr(ring->dev->wl, "DMA ringmemory allocation"
@@ -474,9 +474,9 @@
static void free_ringmemory(struct b43legacy_dmaring *ring)
{
- struct device *dev = ring->dev->dev->dev;
+ struct device *dma_dev = ring->dev->dev->dma_dev;
- dma_free_coherent(dev, B43legacy_DMA_RINGMEMSIZE,
+ dma_free_coherent(dma_dev, B43legacy_DMA_RINGMEMSIZE,
ring->descbase, ring->dmabase);
}
@@ -585,8 +585,9 @@
/* Check if a DMA mapping address is invalid. */
static bool b43legacy_dma_mapping_error(struct b43legacy_dmaring *ring,
- dma_addr_t addr,
- size_t buffersize)
+ dma_addr_t addr,
+ size_t buffersize,
+ bool dma_to_device)
{
if (unlikely(dma_mapping_error(addr)))
return 1;
@@ -594,11 +595,11 @@
switch (ring->type) {
case B43legacy_DMA_30BIT:
if ((u64)addr + buffersize > (1ULL << 30))
- return 1;
+ goto address_error;
break;
case B43legacy_DMA_32BIT:
if ((u64)addr + buffersize > (1ULL << 32))
- return 1;
+ goto address_error;
break;
case B43legacy_DMA_64BIT:
/* Currently we can't have addresses beyond 64 bits in the kernel. */
@@ -607,6 +608,12 @@
/* The address is OK. */
return 0;
+
+address_error:
+ /* We can't support this address. Unmap it again. */
+ unmap_descbuffer(ring, addr, buffersize, dma_to_device);
+
+ return 1;
}
static int setup_rx_descbuffer(struct b43legacy_dmaring *ring,
@@ -626,7 +633,7 @@
return -ENOMEM;
dmaaddr = map_descbuffer(ring, skb->data,
ring->rx_buffersize, 0);
- if (b43legacy_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize)) {
+ if (b43legacy_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
/* ugh. try to realloc in zone_dma */
gfp_flags |= GFP_DMA;
@@ -639,7 +646,7 @@
ring->rx_buffersize, 0);
}
- if (b43legacy_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize)) {
+ if (b43legacy_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
dev_kfree_skb_any(skb);
return -EIO;
}
@@ -886,12 +893,12 @@
goto err_kfree_meta;
/* test for ability to dma to txhdr_cache */
- dma_test = dma_map_single(dev->dev->dev, ring->txhdr_cache,
+ dma_test = dma_map_single(dev->dev->dma_dev, ring->txhdr_cache,
sizeof(struct b43legacy_txhdr_fw3),
DMA_TO_DEVICE);
if (b43legacy_dma_mapping_error(ring, dma_test,
- sizeof(struct b43legacy_txhdr_fw3))) {
+ sizeof(struct b43legacy_txhdr_fw3), 1)) {
/* ugh realloc */
kfree(ring->txhdr_cache);
ring->txhdr_cache = kcalloc(nr_slots,
@@ -900,17 +907,17 @@
if (!ring->txhdr_cache)
goto err_kfree_meta;
- dma_test = dma_map_single(dev->dev->dev,
+ dma_test = dma_map_single(dev->dev->dma_dev,
ring->txhdr_cache,
sizeof(struct b43legacy_txhdr_fw3),
DMA_TO_DEVICE);
if (b43legacy_dma_mapping_error(ring, dma_test,
- sizeof(struct b43legacy_txhdr_fw3)))
+ sizeof(struct b43legacy_txhdr_fw3), 1))
goto err_kfree_txhdr_cache;
}
- dma_unmap_single(dev->dev->dev,
+ dma_unmap_single(dev->dev->dma_dev,
dma_test, sizeof(struct b43legacy_txhdr_fw3),
DMA_TO_DEVICE);
}
@@ -1235,7 +1242,7 @@
meta_hdr->dmaaddr = map_descbuffer(ring, (unsigned char *)header,
sizeof(struct b43legacy_txhdr_fw3), 1);
if (b43legacy_dma_mapping_error(ring, meta_hdr->dmaaddr,
- sizeof(struct b43legacy_txhdr_fw3))) {
+ sizeof(struct b43legacy_txhdr_fw3), 1)) {
ring->current_slot = old_top_slot;
ring->used_slots = old_used_slots;
return -EIO;
@@ -1254,7 +1261,7 @@
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
/* create a bounce buffer in zone_dma on mapping failure. */
- if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len)) {
+ if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb) {
ring->current_slot = old_top_slot;
@@ -1268,7 +1275,7 @@
skb = bounce_skb;
meta->skb = skb;
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
- if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len)) {
+ if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
ring->current_slot = old_top_slot;
ring->used_slots = old_used_slots;
err = -EIO;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 5f3f34e..0f7a6e7 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1488,6 +1488,7 @@
}
if (!fw->initvals) {
switch (dev->phy.type) {
+ case B43legacy_PHYTYPE_B:
case B43legacy_PHYTYPE_G:
if ((rev >= 5) && (rev <= 10))
filename = "b0g0initvals5";
@@ -1505,6 +1506,7 @@
}
if (!fw->initvals_band) {
switch (dev->phy.type) {
+ case B43legacy_PHYTYPE_B:
case B43legacy_PHYTYPE_G:
if ((rev >= 5) && (rev <= 10))
filename = "b0g0bsinitvals5";
diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c
index 49978bd..4fd7380 100644
--- a/drivers/net/wireless/hostap/hostap_80211_rx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_rx.c
@@ -635,7 +635,6 @@
{
struct ieee80211_hdr_4addr *hdr;
int res, hdrlen;
- DECLARE_MAC_BUF(mac);
if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
return 0;
@@ -647,8 +646,10 @@
strcmp(crypt->ops->name, "TKIP") == 0) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
- "received packet from %s\n",
- local->dev->name, print_mac(mac, hdr->addr2));
+ "received packet from " MAC_FMT "\n",
+ local->dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
}
return -1;
}
@@ -657,9 +658,12 @@
res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
atomic_dec(&crypt->refcnt);
if (res < 0) {
- printk(KERN_DEBUG "%s: decryption failed (SA=%s"
+ printk(KERN_DEBUG "%s: decryption failed (SA=" MAC_FMT
") res=%d\n",
- local->dev->name, print_mac(mac, hdr->addr2), res);
+ local->dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ res);
local->comm_tallies.rx_discards_wep_undecryptable++;
return -1;
}
@@ -721,7 +725,6 @@
struct ieee80211_crypt_data *crypt = NULL;
void *sta = NULL;
int keyidx = 0;
- DECLARE_MAC_BUF(mac);
iface = netdev_priv(dev);
local = iface->local;
@@ -798,8 +801,10 @@
* frames silently instead of filling system log with
* these reports. */
printk(KERN_DEBUG "%s: WEP decryption failed (not set)"
- " (SA=%s)\n",
- local->dev->name, print_mac(mac, hdr->addr2));
+ " (SA=" MAC_FMT ")\n",
+ local->dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
#endif
local->comm_tallies.rx_discards_wep_undecryptable++;
goto rx_dropped;
@@ -813,8 +818,9 @@
(keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0)
{
printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
- "from %s\n", dev->name,
- print_mac(mac, hdr->addr2));
+ "from " MAC_FMT "\n", dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
/* TODO: could inform hostapd about this so that it
* could send auth failure report */
goto rx_dropped;
@@ -982,8 +988,10 @@
"unencrypted EAPOL frame\n", local->dev->name);
} else {
printk(KERN_DEBUG "%s: encryption configured, but RX "
- "frame not encrypted (SA=%s)\n",
- local->dev->name, print_mac(mac, hdr->addr2));
+ "frame not encrypted (SA=" MAC_FMT ")\n",
+ local->dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
goto rx_dropped;
}
}
@@ -992,9 +1000,10 @@
!hostap_is_eapol_frame(local, skb)) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: dropped unencrypted RX data "
- "frame from %s"
- " (drop_unencrypted=1)\n",
- dev->name, print_mac(mac, hdr->addr2));
+ "frame from " MAC_FMT " (drop_unencrypted=1)\n",
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
}
goto rx_dropped;
}
diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c
index e7afc3e..921c984 100644
--- a/drivers/net/wireless/hostap/hostap_80211_tx.c
+++ b/drivers/net/wireless/hostap/hostap_80211_tx.c
@@ -314,7 +314,6 @@
struct ieee80211_hdr_4addr *hdr;
u16 fc;
int prefix_len, postfix_len, hdr_len, res;
- DECLARE_MAC_BUF(mac);
iface = netdev_priv(skb->dev);
local = iface->local;
@@ -329,8 +328,10 @@
hdr = (struct ieee80211_hdr_4addr *) skb->data;
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
- "TX packet to %s\n",
- local->dev->name, print_mac(mac, hdr->addr1));
+ "TX packet to " MAC_FMT "\n",
+ local->dev->name,
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
}
kfree_skb(skb);
return NULL;
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index ad040a3..0acd958 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -632,7 +632,6 @@
__le16 *pos;
struct sta_info *sta = NULL;
char *txt = NULL;
- DECLARE_MAC_BUF(mac);
if (ap->local->hostapd) {
dev_kfree_skb(skb);
@@ -684,10 +683,12 @@
if (sta)
atomic_dec(&sta->users);
if (txt) {
- PDEBUG(DEBUG_AP, "%s: %s auth_cb - alg=%d "
+ PDEBUG(DEBUG_AP, "%s: " MAC_FMT " auth_cb - alg=%d "
"trans#=%d status=%d - %s\n",
- dev->name, print_mac(mac, hdr->addr1), auth_alg,
- auth_transaction, status, txt);
+ dev->name,
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+ auth_alg, auth_transaction, status, txt);
}
dev_kfree_skb(skb);
}
@@ -703,7 +704,6 @@
__le16 *pos;
struct sta_info *sta = NULL;
char *txt = NULL;
- DECLARE_MAC_BUF(mac);
if (ap->local->hostapd) {
dev_kfree_skb(skb);
@@ -754,8 +754,11 @@
if (sta)
atomic_dec(&sta->users);
if (txt) {
- PDEBUG(DEBUG_AP, "%s: %s assoc_cb - %s\n",
- dev->name, print_mac(mac, hdr->addr1), txt);
+ PDEBUG(DEBUG_AP, "%s: " MAC_FMT " assoc_cb - %s\n",
+ dev->name,
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+ txt);
}
dev_kfree_skb(skb);
}
@@ -767,7 +770,6 @@
struct ap_data *ap = data;
struct ieee80211_hdr_4addr *hdr;
struct sta_info *sta;
- DECLARE_MAC_BUF(mac);
if (skb->len < 24)
goto fail;
@@ -779,9 +781,11 @@
sta->flags &= ~WLAN_STA_PENDING_POLL;
spin_unlock(&ap->sta_table_lock);
} else {
- PDEBUG(DEBUG_AP, "%s: STA %s"
+ PDEBUG(DEBUG_AP, "%s: STA " MAC_FMT
" did not ACK activity poll frame\n",
- ap->local->dev->name, print_mac(mac, hdr->addr1));
+ ap->local->dev->name,
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
}
fail:
@@ -1306,7 +1310,6 @@
struct sta_info *sta = NULL;
struct ieee80211_crypt_data *crypt;
char *txt = "";
- DECLARE_MAC_BUF(mac);
len = skb->len - IEEE80211_MGMT_HDR_LEN;
@@ -1315,8 +1318,9 @@
if (len < 6) {
PDEBUG(DEBUG_AP, "%s: handle_authen - too short payload "
- "(len=%d) from %s\n", dev->name, len,
- print_mac(mac, hdr->addr2));
+ "(len=%d) from " MAC_FMT "\n", dev->name, len,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
return;
}
@@ -1381,8 +1385,10 @@
if (time_after(jiffies, sta->u.ap.last_beacon +
(10 * sta->listen_interval * HZ) / 1024)) {
PDEBUG(DEBUG_AP, "%s: no beacons received for a while,"
- " assuming AP %s is now STA\n",
- dev->name, print_mac(mac, sta->addr));
+ " assuming AP " MAC_FMT " is now STA\n",
+ dev->name,
+ sta->addr[0], sta->addr[1], sta->addr[2],
+ sta->addr[3], sta->addr[4], sta->addr[5]);
sta->ap = 0;
sta->flags = 0;
sta->u.sta.challenge = NULL;
@@ -1497,10 +1503,13 @@
}
if (resp) {
- PDEBUG(DEBUG_AP, "%s: %s auth (alg=%d "
+ PDEBUG(DEBUG_AP, "%s: " MAC_FMT " auth (alg=%d "
"trans#=%d stat=%d len=%d fc=%04x) ==> %d (%s)\n",
- dev->name, print_mac(mac, hdr->addr2), auth_alg,
- auth_transaction, status_code, len, fc, resp, txt);
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ auth_alg, auth_transaction, status_code, len,
+ fc, resp, txt);
}
}
@@ -1519,14 +1528,15 @@
int send_deauth = 0;
char *txt = "";
u8 prev_ap[ETH_ALEN];
- DECLARE_MAC_BUF(mac);
left = len = skb->len - IEEE80211_MGMT_HDR_LEN;
if (len < (reassoc ? 10 : 4)) {
PDEBUG(DEBUG_AP, "%s: handle_assoc - too short payload "
- "(len=%d, reassoc=%d) from %s\n",
- dev->name, len, reassoc, print_mac(mac, hdr->addr2));
+ "(len=%d, reassoc=%d) from " MAC_FMT "\n",
+ dev->name, len, reassoc,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
return;
}
@@ -1603,9 +1613,12 @@
}
if (left > 0) {
- PDEBUG(DEBUG_AP, "%s: assoc from %s"
+ PDEBUG(DEBUG_AP, "%s: assoc from " MAC_FMT
" with extra data (%d bytes) [",
- dev->name, print_mac(mac, hdr->addr2), left);
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ left);
while (left > 0) {
PDEBUG2(DEBUG_AP, "<%02x>", *u);
u++; left--;
@@ -1704,10 +1717,15 @@
}
#if 0
- PDEBUG(DEBUG_AP, "%s: %s %sassoc (len=%d "
- "prev_ap=%s) => %d(%d) (%s)\n",
- dev->name, print_mac(mac, hdr->addr2), reassoc ? "re" : "", len,
- print_mac(mac, prev_ap), resp, send_deauth, txt);
+ PDEBUG(DEBUG_AP, "%s: " MAC_FMT" %sassoc (len=%d "
+ "prev_ap=" MAC_FMT") => %d(%d) (%s)\n",
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ reassoc ? "re" : "", len,
+ prev_ap[0], prev_ap[1], prev_ap[2],
+ prev_ap[3], prev_ap[4], prev_ap[5],
+ resp, send_deauth, txt);
#endif
}
@@ -1735,9 +1753,11 @@
pos = (__le16 *) body;
reason_code = le16_to_cpu(*pos);
- PDEBUG(DEBUG_AP, "%s: deauthentication: %s len=%d, "
- "reason_code=%d\n", dev->name, print_mac(mac, hdr->addr2), len,
- reason_code);
+ PDEBUG(DEBUG_AP, "%s: deauthentication: " MAC_FMT " len=%d, "
+ "reason_code=%d\n", dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ len, reason_code);
spin_lock_bh(&local->ap->sta_table_lock);
sta = ap_get_sta(local->ap, hdr->addr2);
@@ -1748,9 +1768,11 @@
}
spin_unlock_bh(&local->ap->sta_table_lock);
if (sta == NULL) {
- printk("%s: deauthentication from %s, "
+ printk("%s: deauthentication from " MAC_FMT ", "
"reason_code=%d, but STA not authenticated\n", dev->name,
- print_mac(mac, hdr->addr2), reason_code);
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ reason_code);
}
}
@@ -1766,7 +1788,6 @@
u16 reason_code;
__le16 *pos;
struct sta_info *sta = NULL;
- DECLARE_MAC_BUF(mac);
len = skb->len - IEEE80211_MGMT_HDR_LEN;
@@ -1778,9 +1799,11 @@
pos = (__le16 *) body;
reason_code = le16_to_cpu(*pos);
- PDEBUG(DEBUG_AP, "%s: disassociation: %s len=%d, "
- "reason_code=%d\n", dev->name, print_mac(mac, hdr->addr2), len,
- reason_code);
+ PDEBUG(DEBUG_AP, "%s: disassociation: " MAC_FMT " len=%d, "
+ "reason_code=%d\n", dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ len, reason_code);
spin_lock_bh(&local->ap->sta_table_lock);
sta = ap_get_sta(local->ap, hdr->addr2);
@@ -1791,9 +1814,12 @@
}
spin_unlock_bh(&local->ap->sta_table_lock);
if (sta == NULL) {
- printk("%s: disassociation from %s, "
+ printk("%s: disassociation from " MAC_FMT ", "
"reason_code=%d, but STA not authenticated\n",
- dev->name, print_mac(mac, hdr->addr2), reason_code);
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ reason_code);
}
}
@@ -1882,16 +1908,20 @@
struct sta_info *sta;
u16 aid;
struct sk_buff *skb;
- DECLARE_MAC_BUF(mac);
- PDEBUG(DEBUG_PS2, "handle_pspoll: BSSID=%s"
- ", TA=%s PWRMGT=%d\n",
- print_mac(mac, hdr->addr1), print_mac(mac, hdr->addr2),
+ PDEBUG(DEBUG_PS2, "handle_pspoll: BSSID=" MAC_FMT
+ ", TA=" MAC_FMT " PWRMGT=%d\n",
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
!!(le16_to_cpu(hdr->frame_ctl) & IEEE80211_FCTL_PM));
if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) {
- PDEBUG(DEBUG_AP, "handle_pspoll - addr1(BSSID)=%s"
- " not own MAC\n", print_mac(mac, hdr->addr1));
+ PDEBUG(DEBUG_AP, "handle_pspoll - addr1(BSSID)=" MAC_FMT
+ " not own MAC\n",
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
return;
}
@@ -1969,7 +1999,6 @@
wds_oper_queue);
local_info_t *local = ap->local;
struct wds_oper_data *entry, *prev;
- DECLARE_MAC_BUF(mac);
spin_lock_bh(&local->lock);
entry = local->ap->wds_oper_entries;
@@ -1978,10 +2007,11 @@
while (entry) {
PDEBUG(DEBUG_AP, "%s: %s automatic WDS connection "
- "to AP %s\n",
+ "to AP " MAC_FMT "\n",
local->dev->name,
entry->type == WDS_ADD ? "adding" : "removing",
- print_mac(mac, entry->addr));
+ entry->addr[0], entry->addr[1], entry->addr[2],
+ entry->addr[3], entry->addr[4], entry->addr[5]);
if (entry->type == WDS_ADD)
prism2_wds_add(local, entry->addr, 0);
else if (entry->type == WDS_DEL)
@@ -2158,7 +2188,6 @@
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
u16 fc, type, stype;
struct ieee80211_hdr_4addr *hdr;
- DECLARE_MAC_BUF(mac);
/* FIX: should give skb->len to handler functions and check that the
* buffer is long enough */
@@ -2187,8 +2216,9 @@
if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) {
PDEBUG(DEBUG_AP, "handle_ap_item - addr1(BSSID)="
- "%s not own MAC\n",
- print_mac(mac, hdr->addr1));
+ MAC_FMT " not own MAC\n",
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
goto done;
}
@@ -2224,14 +2254,18 @@
}
if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) {
- PDEBUG(DEBUG_AP, "handle_ap_item - addr1(DA)=%s"
- " not own MAC\n", print_mac(mac, hdr->addr1));
+ PDEBUG(DEBUG_AP, "handle_ap_item - addr1(DA)=" MAC_FMT
+ " not own MAC\n",
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
goto done;
}
if (memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN)) {
- PDEBUG(DEBUG_AP, "handle_ap_item - addr3(BSSID)=%s"
- " not own MAC\n", print_mac(mac, hdr->addr3));
+ PDEBUG(DEBUG_AP, "handle_ap_item - addr3(BSSID)=" MAC_FMT
+ " not own MAC\n",
+ hdr->addr3[0], hdr->addr3[1], hdr->addr3[2],
+ hdr->addr3[3], hdr->addr3[4], hdr->addr3[5]);
goto done;
}
@@ -2312,7 +2346,6 @@
struct sk_buff *skb;
struct ieee80211_hdr_4addr *hdr;
struct hostap_80211_rx_status rx_stats;
- DECLARE_MAC_BUF(mac);
if (skb_queue_empty(&sta->tx_buf))
return;
@@ -2334,7 +2367,9 @@
hdr->duration_id = cpu_to_le16(sta->aid | BIT(15) | BIT(14));
PDEBUG(DEBUG_PS2, "%s: Scheduling buffered packet delivery for STA "
- "%s\n", local->dev->name, print_mac(mac, sta->addr));
+ MAC_FMT "\n", local->dev->name,
+ sta->addr[0], sta->addr[1], sta->addr[2],
+ sta->addr[3], sta->addr[4], sta->addr[5]);
skb->dev = local->dev;
@@ -2661,7 +2696,6 @@
int ret = sta->tx_rate;
struct hostap_interface *iface;
local_info_t *local;
- DECLARE_MAC_BUF(mac);
iface = netdev_priv(dev);
local = iface->local;
@@ -2689,9 +2723,12 @@
case 3: sta->tx_rate = 110; break;
default: sta->tx_rate = 0; break;
}
- PDEBUG(DEBUG_AP, "%s: STA %s"
+ PDEBUG(DEBUG_AP, "%s: STA " MAC_FMT
" TX rate raised to %d\n",
- dev->name, print_mac(mac, sta->addr), sta->tx_rate);
+ dev->name,
+ sta->addr[0], sta->addr[1], sta->addr[2],
+ sta->addr[3], sta->addr[4], sta->addr[5],
+ sta->tx_rate);
}
sta->tx_since_last_failure = 0;
}
@@ -2709,7 +2746,6 @@
int set_tim, ret;
struct ieee80211_hdr_4addr *hdr;
struct hostap_skb_tx_data *meta;
- DECLARE_MAC_BUF(mac);
meta = (struct hostap_skb_tx_data *) skb->cb;
ret = AP_TX_CONTINUE;
@@ -2745,8 +2781,9 @@
* print out any errors here. */
if (net_ratelimit()) {
printk(KERN_DEBUG "AP: drop packet to non-associated "
- "STA %s\n",
- print_mac(mac, hdr->addr1));
+ "STA " MAC_FMT "\n",
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
}
#endif
local->ap->tx_drop_nonassoc++;
@@ -2784,9 +2821,11 @@
}
if (skb_queue_len(&sta->tx_buf) >= STA_MAX_TX_BUFFER) {
- PDEBUG(DEBUG_PS, "%s: No more space in STA (%s"
+ PDEBUG(DEBUG_PS, "%s: No more space in STA (" MAC_FMT
")'s PS mode buffer\n",
- local->dev->name, print_mac(mac, sta->addr));
+ local->dev->name,
+ sta->addr[0], sta->addr[1], sta->addr[2],
+ sta->addr[3], sta->addr[4], sta->addr[5]);
/* Make sure that TIM is set for the station (it might not be
* after AP wlan hw reset). */
/* FIX: should fix hw reset to restore bits based on STA
@@ -2850,7 +2889,6 @@
struct sta_info *sta;
struct ieee80211_hdr_4addr *hdr;
struct hostap_skb_tx_data *meta;
- DECLARE_MAC_BUF(mac);
hdr = (struct ieee80211_hdr_4addr *) skb->data;
meta = (struct hostap_skb_tx_data *) skb->cb;
@@ -2859,9 +2897,12 @@
sta = ap_get_sta(local->ap, hdr->addr1);
if (!sta) {
spin_unlock(&local->ap->sta_table_lock);
- PDEBUG(DEBUG_AP, "%s: Could not find STA %s"
+ PDEBUG(DEBUG_AP, "%s: Could not find STA " MAC_FMT
" for this TX error (@%lu)\n",
- local->dev->name, print_mac(mac, hdr->addr1), jiffies);
+ local->dev->name,
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+ jiffies);
return;
}
@@ -2888,9 +2929,11 @@
case 3: sta->tx_rate = 110; break;
default: sta->tx_rate = 0; break;
}
- PDEBUG(DEBUG_AP, "%s: STA %s"
+ PDEBUG(DEBUG_AP, "%s: STA " MAC_FMT
" TX rate lowered to %d\n",
- local->dev->name, print_mac(mac, sta->addr),
+ local->dev->name,
+ sta->addr[0], sta->addr[1], sta->addr[2],
+ sta->addr[3], sta->addr[4], sta->addr[5],
sta->tx_rate);
}
sta->tx_consecutive_exc = 0;
@@ -2956,7 +2999,6 @@
struct sta_info *sta;
u16 fc, type, stype;
struct ieee80211_hdr_4addr *hdr;
- DECLARE_MAC_BUF(mac);
if (local->ap == NULL)
return AP_RX_CONTINUE;
@@ -2988,9 +3030,12 @@
} else {
printk(KERN_DEBUG "%s: dropped received packet"
" from non-associated STA "
- "%s"
+ MAC_FMT
" (type=0x%02x, subtype=0x%02x)\n",
- dev->name, print_mac(mac, hdr->addr2),
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5],
type >> 2, stype >> 4);
hostap_rx(dev, skb, rx_stats);
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
@@ -3025,8 +3070,11 @@
* being associated. */
printk(KERN_DEBUG "%s: rejected received nullfunc "
"frame without ToDS from not associated STA "
- "%s\n",
- dev->name, print_mac(mac, hdr->addr2));
+ MAC_FMT "\n",
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
hostap_rx(dev, skb, rx_stats);
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
}
@@ -3043,9 +3091,12 @@
* If BSSID is own, report the dropping of this frame. */
if (memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN) == 0) {
printk(KERN_DEBUG "%s: dropped received packet from "
- "%s with no ToDS flag "
+ MAC_FMT " with no ToDS flag "
"(type=0x%02x, subtype=0x%02x)\n", dev->name,
- print_mac(mac, hdr->addr2), type >> 2, stype >> 4);
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5],
+ type >> 2, stype >> 4);
hostap_dump_rx_80211(dev->name, skb, rx_stats);
}
ret = AP_RX_DROP;
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index a56d9fc..98d6ff6 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -10192,7 +10192,6 @@
u8 id, hdr_len, unicast;
u16 remaining_bytes;
int fc;
- DECLARE_MAC_BUF(mac);
hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
switch (priv->ieee->iw_mode) {
@@ -10203,8 +10202,10 @@
id = ipw_add_station(priv, hdr->addr1);
if (id == IPW_INVALID_STATION) {
IPW_WARNING("Attempt to send data to "
- "invalid cell: %s\n",
- print_mac(mac, hdr->addr1));
+ "invalid cell: " MAC_FMT "\n",
+ hdr->addr1[0], hdr->addr1[1],
+ hdr->addr1[2], hdr->addr1[3],
+ hdr->addr1[4], hdr->addr1[5]);
goto drop;
}
}
@@ -11576,6 +11577,7 @@
priv->prom_priv->priv = priv;
strcpy(priv->prom_net_dev->name, "rtap%d");
+ memcpy(priv->prom_net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
priv->prom_net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
priv->prom_net_dev->open = ipw_prom_open;
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index b79a35a..b54ff71 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -35,7 +35,6 @@
bool "Enable 802.11n HT features in iwl4965 driver"
depends on EXPERIMENTAL
depends on IWL4965 && IWL4965_QOS
- depends on n
---help---
This option enables IEEE 802.11n High Throughput features
for the iwl4965 driver.
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index d727de8..6576757 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -4589,7 +4589,7 @@
if (sta_ht_inf) {
if ((!sta_ht_inf->ht_supported) ||
- (!sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH))
+ (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH)))
return 0;
}
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index 87e145f..6a24ed60 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -541,7 +541,7 @@
}
if (find_any_ssid) {
- u8 new_mode;
+ u8 new_mode = assoc_req->mode;
ret = lbs_find_best_network_ssid(priv, assoc_req->ssid,
&assoc_req->ssid_len, assoc_req->mode, &new_mode);
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 5a9cadb..038c66a 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -677,9 +677,7 @@
/* Card has a command result for us */
if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) {
- spin_lock(&priv->driver_lock);
ret = if_cs_receive_cmdres(priv, priv->upld_buf, &priv->upld_len);
- spin_unlock(&priv->driver_lock);
if (ret < 0)
lbs_pr_err("could not receive cmd from card\n");
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index bd305f7..e873a39 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1393,11 +1393,20 @@
exit:
/*
- * Set device mode to sleep for power management.
+ * Set device mode to sleep for power management,
+ * on some hardware this call seems to consistently fail.
+ * From the specifications it is hard to tell why it fails,
+ * and if this is a "bad thing".
+ * Overall it is safe to just ignore the failure and
+ * continue suspending. The only downside is that the
+ * device will not be in optimal power save mode, but with
+ * the radio and the other components already disabled the
+ * device is as good as disabled.
*/
retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
if (retval)
- return retval;
+ WARNING(rt2x00dev, "Device failed to enter sleep state, "
+ "continue suspending.\n");
return 0;
}
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 93ea212..ad2e7d5 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2399,10 +2399,8 @@
* beacon frame.
*/
if (skb_headroom(skb) < TXD_DESC_SIZE) {
- if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) {
- dev_kfree_skb(skb);
+ if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC))
return -ENOMEM;
- }
}
/*
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index f445059..133b3f3 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -509,6 +509,8 @@
return -EOPNOTSUPP;
}
+ priv->vif = conf->vif;
+
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
for (i = 0; i < ETH_ALEN; i++)
rtl818x_iowrite8(priv, &priv->map->MAC[i],
@@ -523,6 +525,7 @@
{
struct rtl8187_priv *priv = dev->priv;
priv->mode = IEEE80211_IF_TYPE_MNTR;
+ priv->vif = NULL;
}
static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index d76d37b..a858089 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1568,9 +1568,8 @@
outb(r | 8, 0x2F);
outb(0x02, 0x2E); /* Lock */
outb(0x02, 0x2F);
-
- release_region(0x2e, 1);
}
+ release_region(0x2e, 1);
}
#endif /* CONFIG_PARPORT_PC_SUPERIO */
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 385e145..6849685 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -419,3 +419,4 @@
MODULE_DESCRIPTION("AT91 Compact Flash Driver");
MODULE_AUTHOR("David Brownell");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_cf");
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index 2df216b..bb6db3a 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -344,6 +344,7 @@
static struct platform_driver omap_cf_driver = {
.driver = {
.name = (char *) driver_name,
+ .owner = THIS_MODULE,
},
.remove = __exit_p(omap_cf_remove),
.suspend = omap_cf_suspend,
@@ -368,3 +369,4 @@
MODULE_DESCRIPTION("OMAP CF Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:omap_cf");
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index e439044..9414163 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -239,6 +239,7 @@
.resume = pxa2xx_drv_pcmcia_resume,
.driver = {
.name = "pxa2xx-pcmcia",
+ .owner = THIS_MODULE,
},
};
@@ -258,3 +259,4 @@
MODULE_AUTHOR("Stefan Eletzhofer <stefan.eletzhofer@inquant.de> and Ian Molton <spyro@f2s.com>");
MODULE_DESCRIPTION("Linux PCMCIA Card Services: PXA2xx core socket driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 9e7de63..02a4c8c 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -252,6 +252,7 @@
config RTC_DRV_S35390A
tristate "Seiko Instruments S-35390A"
+ select BITREVERSE
help
If you say yes here you will get support for the Seiko
Instruments S-35390A.
diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
index d3b9b14..42244f1 100644
--- a/drivers/rtc/rtc-at32ap700x.c
+++ b/drivers/rtc/rtc-at32ap700x.c
@@ -290,7 +290,7 @@
return 0;
}
-MODULE_ALIAS("at32ap700x_rtc");
+MODULE_ALIAS("platform:at32ap700x_rtc");
static struct platform_driver at32_rtc_driver = {
.remove = __exit_p(at32_rtc_remove),
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 33795e5..52abffc8 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -407,3 +407,4 @@
MODULE_AUTHOR("Rick Bronson");
MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_rtc");
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index d90ba86..4f28045 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -470,3 +470,4 @@
MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver");
MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-bfin");
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index f3ee2ad..dcdc142 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -198,9 +198,8 @@
/* Writing 0xff means "don't care" or "match all". */
- mon = t->time.tm_mon;
- mon = (mon < 12) ? BIN2BCD(mon) : 0xff;
- mon++;
+ mon = t->time.tm_mon + 1;
+ mon = (mon <= 12) ? BIN2BCD(mon) : 0xff;
mday = t->time.tm_mday;
mday = (mday >= 1 && mday <= 31) ? BIN2BCD(mday) : 0xff;
@@ -943,6 +942,9 @@
cmos_do_shutdown();
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc_cmos");
+
static struct platform_driver cmos_platform_driver = {
.remove = __exit_p(cmos_platform_remove),
.shutdown = cmos_platform_shutdown,
diff --git a/drivers/rtc/rtc-ds1216.c b/drivers/rtc/rtc-ds1216.c
index 83efb88..0b17770 100644
--- a/drivers/rtc/rtc-ds1216.c
+++ b/drivers/rtc/rtc-ds1216.c
@@ -221,6 +221,7 @@
MODULE_DESCRIPTION("DS1216 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:rtc-ds1216");
module_init(ds1216_rtc_init);
module_exit(ds1216_rtc_exit);
diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c
index d74b808..d08912f 100644
--- a/drivers/rtc/rtc-ds1511.c
+++ b/drivers/rtc/rtc-ds1511.c
@@ -626,6 +626,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:ds1511");
+
static struct platform_driver ds1511_rtc_driver = {
.probe = ds1511_rtc_probe,
.remove = __devexit_p(ds1511_rtc_remove),
diff --git a/drivers/rtc/rtc-ds1553.c b/drivers/rtc/rtc-ds1553.c
index d9e848d..a19f114 100644
--- a/drivers/rtc/rtc-ds1553.c
+++ b/drivers/rtc/rtc-ds1553.c
@@ -391,6 +391,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc-ds1553");
+
static struct platform_driver ds1553_rtc_driver = {
.probe = ds1553_rtc_probe,
.remove = __devexit_p(ds1553_rtc_remove),
diff --git a/drivers/rtc/rtc-ds1742.c b/drivers/rtc/rtc-ds1742.c
index 2e73f0b..24d35ed 100644
--- a/drivers/rtc/rtc-ds1742.c
+++ b/drivers/rtc/rtc-ds1742.c
@@ -276,3 +276,4 @@
MODULE_DESCRIPTION("Dallas DS1742 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:rtc-ds1742");
diff --git a/drivers/rtc/rtc-ep93xx.c b/drivers/rtc/rtc-ep93xx.c
index ef4f147..1e99325 100644
--- a/drivers/rtc/rtc-ep93xx.c
+++ b/drivers/rtc/rtc-ep93xx.c
@@ -132,6 +132,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:ep93xx-rtc");
+
static struct platform_driver ep93xx_rtc_platform_driver = {
.driver = {
.name = "ep93xx-rtc",
diff --git a/drivers/rtc/rtc-m48t59.c b/drivers/rtc/rtc-m48t59.c
index cd0bbc0..013e6c1 100644
--- a/drivers/rtc/rtc-m48t59.c
+++ b/drivers/rtc/rtc-m48t59.c
@@ -465,6 +465,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc-m48t59");
+
static struct platform_driver m48t59_rtc_driver = {
.driver = {
.name = "rtc-m48t59",
diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c
index 8ff4a12..3f7f99a 100644
--- a/drivers/rtc/rtc-m48t86.c
+++ b/drivers/rtc/rtc-m48t86.c
@@ -199,6 +199,7 @@
MODULE_DESCRIPTION("M48T86 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:rtc-m48t86");
module_init(m48t86_rtc_init);
module_exit(m48t86_rtc_exit);
diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c
index a2f84f1..58f81c7 100644
--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -497,7 +497,7 @@
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
}
-MODULE_ALIAS("omap_rtc");
+MODULE_ALIAS("platform:omap_rtc");
static struct platform_driver omap_rtc_driver = {
.probe = omap_rtc_probe,
.remove = __devexit_p(omap_rtc_remove),
diff --git a/drivers/rtc/rtc-rs5c313.c b/drivers/rtc/rtc-rs5c313.c
index 66eb133..664e89a 100644
--- a/drivers/rtc/rtc-rs5c313.c
+++ b/drivers/rtc/rtc-rs5c313.c
@@ -421,3 +421,4 @@
MODULE_AUTHOR("kogiidena , Nobuhiro Iwamatsu <iwamatsu@nigauri.org>");
MODULE_DESCRIPTION("Ricoh RS5C313 RTC device driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 86766f1..9f4d512 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -592,3 +592,4 @@
MODULE_DESCRIPTION("Samsung S3C RTC Driver");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-rtc");
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index ee253cc..82f62d2 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -399,3 +399,4 @@
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("SA11x0/PXA2xx Realtime Clock Driver (RTC)");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sa1100-rtc");
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index c1d6a18..9e9caa5 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -664,3 +664,4 @@
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, Jamie Lenehan <lenehan@twibble.org>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c
index a265da7..31d3c8c 100644
--- a/drivers/rtc/rtc-stk17ta8.c
+++ b/drivers/rtc/rtc-stk17ta8.c
@@ -394,6 +394,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:stk17ta8");
+
static struct platform_driver stk17ta8_rtc_driver = {
.probe = stk17ta8_rtc_probe,
.remove = __devexit_p(stk17ta8_rtc_remove),
diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c
index a6b5729..24203a0 100644
--- a/drivers/rtc/rtc-v3020.c
+++ b/drivers/rtc/rtc-v3020.c
@@ -264,3 +264,4 @@
MODULE_DESCRIPTION("V3020 RTC");
MODULE_AUTHOR("Raphael Assenat");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:v3020");
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index ce2f78d..be9c70d 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -422,6 +422,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:RTC");
+
static struct platform_driver rtc_platform_driver = {
.probe = rtc_probe,
.remove = __devexit_p(rtc_remove),
diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
index e879b21..0788319 100644
--- a/drivers/s390/block/Kconfig
+++ b/drivers/s390/block/Kconfig
@@ -20,6 +20,7 @@
config DASD
tristate "Support for DASD devices"
depends on CCW && BLOCK
+ select IOSCHED_DEADLINE
help
Enable this option if you want to access DASDs directly utilizing
S/390s channel subsystem commands. This is necessary for running
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index ccf46c9..ac6d4d3 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -980,12 +980,12 @@
break;
case -ETIMEDOUT:
printk(KERN_WARNING"%s(%s): request timed out\n",
- __FUNCTION__, cdev->dev.bus_id);
+ __func__, cdev->dev.bus_id);
//FIXME - dasd uses own timeout interface...
break;
default:
printk(KERN_WARNING"%s(%s): unknown error %ld\n",
- __FUNCTION__, cdev->dev.bus_id, PTR_ERR(irb));
+ __func__, cdev->dev.bus_id, PTR_ERR(irb));
}
return;
}
@@ -1956,6 +1956,7 @@
block->request_queue->queuedata = block;
elevator_exit(block->request_queue->elevator);
+ block->request_queue->elevator = NULL;
rc = elevator_init(block->request_queue, "deadline");
if (rc) {
blk_cleanup_queue(block->request_queue);
@@ -2298,9 +2299,8 @@
* in the other openers.
*/
if (device->block) {
- struct dasd_block *block = device->block;
- max_count = block->bdev ? 0 : -1;
- open_count = (int) atomic_read(&block->open_count);
+ max_count = device->block->bdev ? 0 : -1;
+ open_count = atomic_read(&device->block->open_count);
if (open_count > max_count) {
if (open_count > 0)
printk(KERN_WARNING "Can't offline dasd "
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index b19db20..e6700df 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -1996,6 +1996,36 @@
} /* end dasd_3990_erp_compound */
/*
+ *DASD_3990_ERP_HANDLE_SIM
+ *
+ *DESCRIPTION
+ * inspects the SIM SENSE data and starts an appropriate action
+ *
+ * PARAMETER
+ * sense sense data of the actual error
+ *
+ * RETURN VALUES
+ * none
+ */
+void
+dasd_3990_erp_handle_sim(struct dasd_device *device, char *sense)
+{
+ /* print message according to log or message to operator mode */
+ if ((sense[24] & DASD_SIM_MSG_TO_OP) || (sense[1] & 0x10)) {
+
+ /* print SIM SRC from RefCode */
+ DEV_MESSAGE(KERN_ERR, device, "SIM - SRC: "
+ "%02x%02x%02x%02x", sense[22],
+ sense[23], sense[11], sense[12]);
+ } else if (sense[24] & DASD_SIM_LOG) {
+ /* print SIM SRC Refcode */
+ DEV_MESSAGE(KERN_WARNING, device, "SIM - SRC: "
+ "%02x%02x%02x%02x", sense[22],
+ sense[23], sense[11], sense[12]);
+ }
+}
+
+/*
* DASD_3990_ERP_INSPECT_32
*
* DESCRIPTION
@@ -2018,6 +2048,10 @@
erp->function = dasd_3990_erp_inspect_32;
+ /* check for SIM sense data */
+ if ((sense[6] & DASD_SIM_SENSE) == DASD_SIM_SENSE)
+ dasd_3990_erp_handle_sim(device, sense);
+
if (sense[25] & DASD_SENSE_BIT_0) {
/* compound program action codes (byte25 bit 0 == '1') */
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 3a40bee..2d8df0b 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -745,6 +745,19 @@
spin_unlock_irqrestore(&lcu->lock, flags);
}
+static void __stop_device_on_lcu(struct dasd_device *device,
+ struct dasd_device *pos)
+{
+ /* If pos == device then device is already locked! */
+ if (pos == device) {
+ pos->stopped |= DASD_STOPPED_SU;
+ return;
+ }
+ spin_lock(get_ccwdev_lock(pos->cdev));
+ pos->stopped |= DASD_STOPPED_SU;
+ spin_unlock(get_ccwdev_lock(pos->cdev));
+}
+
/*
* This function is called in interrupt context, so the
* cdev lock for device is already locked!
@@ -755,35 +768,15 @@
struct alias_pav_group *pavgroup;
struct dasd_device *pos;
- list_for_each_entry(pos, &lcu->active_devices, alias_list) {
- if (pos != device)
- spin_lock(get_ccwdev_lock(pos->cdev));
- pos->stopped |= DASD_STOPPED_SU;
- if (pos != device)
- spin_unlock(get_ccwdev_lock(pos->cdev));
- }
- list_for_each_entry(pos, &lcu->inactive_devices, alias_list) {
- if (pos != device)
- spin_lock(get_ccwdev_lock(pos->cdev));
- pos->stopped |= DASD_STOPPED_SU;
- if (pos != device)
- spin_unlock(get_ccwdev_lock(pos->cdev));
- }
+ list_for_each_entry(pos, &lcu->active_devices, alias_list)
+ __stop_device_on_lcu(device, pos);
+ list_for_each_entry(pos, &lcu->inactive_devices, alias_list)
+ __stop_device_on_lcu(device, pos);
list_for_each_entry(pavgroup, &lcu->grouplist, group) {
- list_for_each_entry(pos, &pavgroup->baselist, alias_list) {
- if (pos != device)
- spin_lock(get_ccwdev_lock(pos->cdev));
- pos->stopped |= DASD_STOPPED_SU;
- if (pos != device)
- spin_unlock(get_ccwdev_lock(pos->cdev));
- }
- list_for_each_entry(pos, &pavgroup->aliaslist, alias_list) {
- if (pos != device)
- spin_lock(get_ccwdev_lock(pos->cdev));
- pos->stopped |= DASD_STOPPED_SU;
- if (pos != device)
- spin_unlock(get_ccwdev_lock(pos->cdev));
- }
+ list_for_each_entry(pos, &pavgroup->baselist, alias_list)
+ __stop_device_on_lcu(device, pos);
+ list_for_each_entry(pos, &pavgroup->aliaslist, alias_list)
+ __stop_device_on_lcu(device, pos);
}
}
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 61f1693..a0edae0 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1415,6 +1415,13 @@
return;
}
+
+ /* service information message SIM */
+ if ((irb->ecw[6] & DASD_SIM_SENSE) == DASD_SIM_SENSE) {
+ dasd_3990_erp_handle_sim(device, irb->ecw);
+ return;
+ }
+
/* just report other unsolicited interrupts */
DEV_MESSAGE(KERN_DEBUG, device, "%s",
"unsolicited interrupt received");
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index d13ea05..1166115 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -125,7 +125,8 @@
private = (struct dasd_fba_private *) device->private;
if (private == NULL) {
- private = kzalloc(sizeof(struct dasd_fba_private), GFP_KERNEL);
+ private = kzalloc(sizeof(struct dasd_fba_private),
+ GFP_KERNEL | GFP_DMA);
if (private == NULL) {
DEV_MESSAGE(KERN_WARNING, device, "%s",
"memory allocation failed for private "
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 44b2984..6c624bf 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -72,6 +72,11 @@
#define DASD_SENSE_BIT_2 0x20
#define DASD_SENSE_BIT_3 0x10
+/* BIT DEFINITIONS FOR SIM SENSE */
+#define DASD_SIM_SENSE 0x0F
+#define DASD_SIM_MSG_TO_OP 0x03
+#define DASD_SIM_LOG 0x0C
+
/*
* SECTION: MACROs for klogd and s390 debug feature (dbf)
*/
@@ -621,6 +626,7 @@
/* externals in dasd_3990_erp.c */
struct dasd_ccw_req *dasd_3990_erp_action(struct dasd_ccw_req *);
+void dasd_3990_erp_handle_sim(struct dasd_device *, char *);
/* externals in dasd_eer.c */
#ifdef CONFIG_DASD_EER
diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index e6c94db..04787ea 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -142,57 +142,6 @@
return NULL;
}
-/*
- * print appropriate error message for segment_load()/segment_type()
- * return code
- */
-static void
-dcssblk_segment_warn(int rc, char* seg_name)
-{
- switch (rc) {
- case -ENOENT:
- PRINT_WARN("cannot load/query segment %s, does not exist\n",
- seg_name);
- break;
- case -ENOSYS:
- PRINT_WARN("cannot load/query segment %s, not running on VM\n",
- seg_name);
- break;
- case -EIO:
- PRINT_WARN("cannot load/query segment %s, hardware error\n",
- seg_name);
- break;
- case -ENOTSUPP:
- PRINT_WARN("cannot load/query segment %s, is a multi-part "
- "segment\n", seg_name);
- break;
- case -ENOSPC:
- PRINT_WARN("cannot load/query segment %s, overlaps with "
- "storage\n", seg_name);
- break;
- case -EBUSY:
- PRINT_WARN("cannot load/query segment %s, overlaps with "
- "already loaded dcss\n", seg_name);
- break;
- case -EPERM:
- PRINT_WARN("cannot load/query segment %s, already loaded in "
- "incompatible mode\n", seg_name);
- break;
- case -ENOMEM:
- PRINT_WARN("cannot load/query segment %s, out of memory\n",
- seg_name);
- break;
- case -ERANGE:
- PRINT_WARN("cannot load/query segment %s, exceeds kernel "
- "mapping range\n", seg_name);
- break;
- default:
- PRINT_WARN("cannot load/query segment %s, return value %i\n",
- seg_name, rc);
- break;
- }
-}
-
static void dcssblk_unregister_callback(struct device *dev)
{
device_unregister(dev);
@@ -423,7 +372,7 @@
rc = segment_load(local_buf, SEGMENT_SHARED,
&dev_info->start, &dev_info->end);
if (rc < 0) {
- dcssblk_segment_warn(rc, dev_info->segment_name);
+ segment_warning(rc, dev_info->segment_name);
goto dealloc_gendisk;
}
seg_byte_size = (dev_info->end - dev_info->start + 1);
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 67009bf..1e1f506 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -111,56 +111,6 @@
ASCEBC(ebcdic_name, 8);
}
-/*
- * print appropriate error message for segment_load()/segment_type()
- * return code
- */
-static void mon_segment_warn(int rc, char* seg_name)
-{
- switch (rc) {
- case -ENOENT:
- P_WARNING("cannot load/query segment %s, does not exist\n",
- seg_name);
- break;
- case -ENOSYS:
- P_WARNING("cannot load/query segment %s, not running on VM\n",
- seg_name);
- break;
- case -EIO:
- P_WARNING("cannot load/query segment %s, hardware error\n",
- seg_name);
- break;
- case -ENOTSUPP:
- P_WARNING("cannot load/query segment %s, is a multi-part "
- "segment\n", seg_name);
- break;
- case -ENOSPC:
- P_WARNING("cannot load/query segment %s, overlaps with "
- "storage\n", seg_name);
- break;
- case -EBUSY:
- P_WARNING("cannot load/query segment %s, overlaps with "
- "already loaded dcss\n", seg_name);
- break;
- case -EPERM:
- P_WARNING("cannot load/query segment %s, already loaded in "
- "incompatible mode\n", seg_name);
- break;
- case -ENOMEM:
- P_WARNING("cannot load/query segment %s, out of memory\n",
- seg_name);
- break;
- case -ERANGE:
- P_WARNING("cannot load/query segment %s, exceeds kernel "
- "mapping range\n", seg_name);
- break;
- default:
- P_WARNING("cannot load/query segment %s, return value %i\n",
- seg_name, rc);
- break;
- }
-}
-
static inline unsigned long mon_mca_start(struct mon_msg *monmsg)
{
return *(u32 *) &monmsg->msg.rmmsg;
@@ -585,7 +535,7 @@
rc = segment_type(mon_dcss_name);
if (rc < 0) {
- mon_segment_warn(rc, mon_dcss_name);
+ segment_warning(rc, mon_dcss_name);
goto out_iucv;
}
if (rc != SEG_TYPE_SC) {
@@ -598,7 +548,7 @@
rc = segment_load(mon_dcss_name, SEGMENT_SHARED,
&mon_dcss_start, &mon_dcss_end);
if (rc < 0) {
- mon_segment_warn(rc, mon_dcss_name);
+ segment_warning(rc, mon_dcss_name);
rc = -EINVAL;
goto out_iucv;
}
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
index 2e616e3..e3b3d39 100644
--- a/drivers/s390/char/sclp_tty.c
+++ b/drivers/s390/char/sclp_tty.c
@@ -332,7 +332,7 @@
if (sclp_ttybuf == NULL) {
while (list_empty(&sclp_tty_pages)) {
spin_unlock_irqrestore(&sclp_tty_lock, flags);
- if (in_atomic())
+ if (in_interrupt())
sclp_sync_wait();
else
wait_event(sclp_tty_waitq,
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index f7b258d..ed50759 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -383,7 +383,7 @@
*/
static int
__sclp_vt220_write(const unsigned char *buf, int count, int do_schedule,
- int convertlf)
+ int convertlf, int may_schedule)
{
unsigned long flags;
void *page;
@@ -398,9 +398,8 @@
/* Create a sclp output buffer if none exists yet */
if (sclp_vt220_current_request == NULL) {
while (list_empty(&sclp_vt220_empty)) {
- spin_unlock_irqrestore(&sclp_vt220_lock,
- flags);
- if (in_atomic())
+ spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+ if (in_interrupt() || !may_schedule)
sclp_sync_wait();
else
wait_event(sclp_vt220_waitq,
@@ -450,7 +449,7 @@
static int
sclp_vt220_write(struct tty_struct *tty, const unsigned char *buf, int count)
{
- return __sclp_vt220_write(buf, count, 1, 0);
+ return __sclp_vt220_write(buf, count, 1, 0, 1);
}
#define SCLP_VT220_SESSION_ENDED 0x01
@@ -529,7 +528,7 @@
static void
sclp_vt220_put_char(struct tty_struct *tty, unsigned char ch)
{
- __sclp_vt220_write(&ch, 1, 0, 0);
+ __sclp_vt220_write(&ch, 1, 0, 0, 1);
}
/*
@@ -746,7 +745,7 @@
static void
sclp_vt220_con_write(struct console *con, const char *buf, unsigned int count)
{
- __sclp_vt220_write((const unsigned char *) buf, count, 1, 1);
+ __sclp_vt220_write((const unsigned char *) buf, count, 1, 1, 0);
}
static struct tty_driver *
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 5b47e9c..874adf3 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -394,7 +394,7 @@
return tape_34xx_erp_failed(request, -ENOSPC);
default:
PRINT_ERR("Invalid op in %s:%i\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return tape_34xx_erp_failed(request, 0);
}
}
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index b830a8c..ebe8406 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -83,9 +83,9 @@
void
tapechar_cleanup_device(struct tape_device *device)
{
- unregister_tape_dev(device->rt);
+ unregister_tape_dev(&device->cdev->dev, device->rt);
device->rt = NULL;
- unregister_tape_dev(device->nt);
+ unregister_tape_dev(&device->cdev->dev, device->nt);
device->nt = NULL;
}
diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c
index aa7f166..6dfdb7c 100644
--- a/drivers/s390/char/tape_class.c
+++ b/drivers/s390/char/tape_class.c
@@ -99,11 +99,10 @@
}
EXPORT_SYMBOL(register_tape_dev);
-void unregister_tape_dev(struct tape_class_device *tcd)
+void unregister_tape_dev(struct device *device, struct tape_class_device *tcd)
{
if (tcd != NULL && !IS_ERR(tcd)) {
- sysfs_remove_link(&tcd->class_device->kobj,
- tcd->mode_name);
+ sysfs_remove_link(&device->kobj, tcd->mode_name);
device_destroy(tape_class, tcd->char_device->dev);
cdev_del(tcd->char_device);
kfree(tcd);
diff --git a/drivers/s390/char/tape_class.h b/drivers/s390/char/tape_class.h
index e2b5ac9..707b7f4 100644
--- a/drivers/s390/char/tape_class.h
+++ b/drivers/s390/char/tape_class.h
@@ -56,6 +56,6 @@
char * device_name,
char * node_name
);
-void unregister_tape_dev(struct tape_class_device *tcd);
+void unregister_tape_dev(struct device *device, struct tape_class_device *tcd);
#endif /* __TAPE_CLASS_H__ */
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 7689b50..83ae9a8 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -100,7 +100,8 @@
urd->reclen = cdev->id.driver_info;
ccw_device_get_id(cdev, &urd->dev_id);
mutex_init(&urd->io_mutex);
- mutex_init(&urd->open_mutex);
+ init_waitqueue_head(&urd->wait);
+ spin_lock_init(&urd->open_lock);
atomic_set(&urd->ref_count, 1);
urd->cdev = cdev;
get_device(&cdev->dev);
@@ -678,17 +679,21 @@
if (!urd)
return -ENXIO;
- if (file->f_flags & O_NONBLOCK) {
- if (!mutex_trylock(&urd->open_mutex)) {
+ spin_lock(&urd->open_lock);
+ while (urd->open_flag) {
+ spin_unlock(&urd->open_lock);
+ if (file->f_flags & O_NONBLOCK) {
rc = -EBUSY;
goto fail_put;
}
- } else {
- if (mutex_lock_interruptible(&urd->open_mutex)) {
+ if (wait_event_interruptible(urd->wait, urd->open_flag == 0)) {
rc = -ERESTARTSYS;
goto fail_put;
}
+ spin_lock(&urd->open_lock);
}
+ urd->open_flag++;
+ spin_unlock(&urd->open_lock);
TRACE("ur_open\n");
@@ -720,7 +725,9 @@
fail_urfile_free:
urfile_free(urf);
fail_unlock:
- mutex_unlock(&urd->open_mutex);
+ spin_lock(&urd->open_lock);
+ urd->open_flag--;
+ spin_unlock(&urd->open_lock);
fail_put:
urdev_put(urd);
return rc;
@@ -731,7 +738,10 @@
struct urfile *urf = file->private_data;
TRACE("ur_release\n");
- mutex_unlock(&urf->urd->open_mutex);
+ spin_lock(&urf->urd->open_lock);
+ urf->urd->open_flag--;
+ spin_unlock(&urf->urd->open_lock);
+ wake_up_interruptible(&urf->urd->wait);
urdev_put(urf->urd);
urfile_free(urf);
return 0;
diff --git a/drivers/s390/char/vmur.h b/drivers/s390/char/vmur.h
index fa95964..fa320ad 100644
--- a/drivers/s390/char/vmur.h
+++ b/drivers/s390/char/vmur.h
@@ -62,7 +62,6 @@
struct urdev {
struct ccw_device *cdev; /* Backpointer to ccw device */
struct mutex io_mutex; /* Serialises device IO */
- struct mutex open_mutex; /* Serialises access to device */
struct completion *io_done; /* do_ur_io waits; irq completes */
struct device *device;
struct cdev *char_device;
@@ -71,6 +70,9 @@
int class; /* VM device class */
int io_request_rc; /* return code from I/O request */
atomic_t ref_count; /* reference counter */
+ wait_queue_head_t wait; /* wait queue to serialize open */
+ int open_flag; /* "urdev is open" flag */
+ spinlock_t open_lock; /* serialize critical sections */
};
/*
diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c
index 6f40fac..19f8389 100644
--- a/drivers/s390/char/vmwatchdog.c
+++ b/drivers/s390/char/vmwatchdog.c
@@ -96,7 +96,7 @@
if (ret) {
printk(KERN_WARNING "%s: problem setting interval %d, "
- "cmd %s\n", __FUNCTION__, vmwdt_interval,
+ "cmd %s\n", __func__, vmwdt_interval,
vmwdt_cmd);
}
return ret;
@@ -107,7 +107,7 @@
int ret = __diag288(wdt_cancel, 0, "", 0);
if (ret) {
printk(KERN_WARNING "%s: problem disabling watchdog\n",
- __FUNCTION__);
+ __func__);
}
return ret;
}
diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c
index f523501..bbbd14e 100644
--- a/drivers/s390/char/zcore.c
+++ b/drivers/s390/char/zcore.c
@@ -224,7 +224,7 @@
sa = kmalloc(sizeof(*sa), GFP_KERNEL);
if (!sa) {
- ERROR_MSG("kmalloc failed: %s: %i\n",__FUNCTION__, __LINE__);
+ ERROR_MSG("kmalloc failed: %s: %i\n",__func__, __LINE__);
return -ENOMEM;
}
if (memcpy_hsa_kernel(sa, sys_info.sa_base, sys_info.sa_size) < 0) {
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 007aaeb..5de8690 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -217,6 +217,8 @@
if (chp_get_status(chpid) <= 0)
return;
+ /* Wait until previous actions have settled. */
+ css_wait_for_slow_path();
for_each_subchannel_staged(s390_subchannel_remove_chpid, NULL, &chpid);
}
@@ -303,7 +305,8 @@
sprintf(dbf_txt, "fla%x", res_data->fla);
CIO_TRACE_EVENT( 2, dbf_txt);
}
-
+ /* Wait until previous actions have settled. */
+ css_wait_for_slow_path();
/*
* I/O resources may have become accessible.
* Scan through all subchannels that may be concerned and
@@ -561,9 +564,12 @@
sprintf(dbf_txt, "cadd%x.%02x", chpid.cssid, chpid.id);
CIO_TRACE_EVENT(2, dbf_txt);
- if (chp_get_status(chpid) != 0)
+ if (chp_get_status(chpid) != 0) {
+ /* Wait until previous actions have settled. */
+ css_wait_for_slow_path();
for_each_subchannel_staged(__chp_add, __chp_add_new_sch,
&chpid);
+ }
}
static void __s390_subchannel_vary_chpid(struct subchannel *sch,
@@ -650,6 +656,8 @@
*/
int chsc_chp_vary(struct chp_id chpid, int on)
{
+ /* Wait until previous actions have settled. */
+ css_wait_for_slow_path();
/*
* Redo PathVerification on the devices the chpid connects to
*/
@@ -758,7 +766,6 @@
if (!secm_area)
return -ENOMEM;
- mutex_lock(&css->mutex);
if (enable && !css->cm_enabled) {
css->cub_addr1 = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
css->cub_addr2 = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
@@ -766,7 +773,6 @@
free_page((unsigned long)css->cub_addr1);
free_page((unsigned long)css->cub_addr2);
free_page((unsigned long)secm_area);
- mutex_unlock(&css->mutex);
return -ENOMEM;
}
}
@@ -787,7 +793,6 @@
free_page((unsigned long)css->cub_addr1);
free_page((unsigned long)css->cub_addr2);
}
- mutex_unlock(&css->mutex);
free_page((unsigned long)secm_area);
return ret;
}
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 60590a1..23ffcc4 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -24,6 +24,7 @@
#include <asm/ipl.h>
#include <asm/chpid.h>
#include <asm/airq.h>
+#include <asm/cpu.h>
#include "cio.h"
#include "css.h"
#include "chsc.h"
@@ -649,13 +650,10 @@
old_regs = set_irq_regs(regs);
irq_enter();
- asm volatile ("mc 0,0");
- if (S390_lowcore.int_clock >= S390_lowcore.jiffy_timer)
- /**
- * Make sure that the i/o interrupt did not "overtake"
- * the last HZ timer interrupt.
- */
- account_ticks(S390_lowcore.int_clock);
+ s390_idle_check();
+ if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
+ /* Serve timer interrupts first. */
+ clock_comparator_work();
/*
* Get interrupt information from lowcore
*/
@@ -672,10 +670,14 @@
continue;
}
sch = (struct subchannel *)(unsigned long)tpi_info->intparm;
- if (sch)
- spin_lock(sch->lock);
+ if (!sch) {
+ /* Clear pending interrupt condition. */
+ tsch(tpi_info->schid, irb);
+ continue;
+ }
+ spin_lock(sch->lock);
/* Store interrupt response block to lowcore. */
- if (tsch (tpi_info->schid, irb) == 0 && sch) {
+ if (tsch(tpi_info->schid, irb) == 0) {
/* Keep subchannel information word up to date. */
memcpy (&sch->schib.scsw, &irb->scsw,
sizeof (irb->scsw));
@@ -683,8 +685,7 @@
if (sch->driver && sch->driver->irq)
sch->driver->irq(sch);
}
- if (sch)
- spin_unlock(sch->lock);
+ spin_unlock(sch->lock);
/*
* Are more interrupts pending?
* If so, the tpi instruction will update the lowcore
@@ -710,8 +711,9 @@
/*
* busy wait for the next interrupt on the console
*/
-void
-wait_cons_dev (void)
+void wait_cons_dev(void)
+ __releases(console_subchannel.lock)
+ __acquires(console_subchannel.lock)
{
unsigned long cr6 __attribute__ ((aligned (8)));
unsigned long save_cr6 __attribute__ ((aligned (8)));
diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h
index 52afa4c..08f2235 100644
--- a/drivers/s390/cio/cio.h
+++ b/drivers/s390/cio/cio.h
@@ -100,6 +100,7 @@
int cio_create_sch_lock(struct subchannel *);
void do_adapter_IO(void);
+void do_IRQ(struct pt_regs *);
/* Use with care. */
#ifdef CONFIG_CCW_CONSOLE
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 3b45bbe..c1afab5 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -533,6 +533,12 @@
spin_unlock_irqrestore(&slow_subchannel_lock, flags);
}
+void css_wait_for_slow_path(void)
+{
+ flush_workqueue(ccw_device_notify_work);
+ flush_workqueue(slow_path_wq);
+}
+
/* Reprobe subchannel if unregistered. */
static int reprobe_subchannel(struct subchannel_id schid, void *data)
{
@@ -683,10 +689,14 @@
char *buf)
{
struct channel_subsystem *css = to_css(dev);
+ int ret;
if (!css)
return 0;
- return sprintf(buf, "%x\n", css->cm_enabled);
+ mutex_lock(&css->mutex);
+ ret = sprintf(buf, "%x\n", css->cm_enabled);
+ mutex_unlock(&css->mutex);
+ return ret;
}
static ssize_t
@@ -696,6 +706,7 @@
struct channel_subsystem *css = to_css(dev);
int ret;
+ mutex_lock(&css->mutex);
switch (buf[0]) {
case '0':
ret = css->cm_enabled ? chsc_secm(css, 0) : 0;
@@ -706,6 +717,7 @@
default:
ret = -EINVAL;
}
+ mutex_unlock(&css->mutex);
return ret < 0 ? ret : count;
}
@@ -752,9 +764,11 @@
struct channel_subsystem *css;
css = channel_subsystems[i];
+ mutex_lock(&css->mutex);
if (css->cm_enabled)
if (chsc_secm(css, 0))
ret = NOTIFY_BAD;
+ mutex_unlock(&css->mutex);
}
return ret;
diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h
index b705545..e191351 100644
--- a/drivers/s390/cio/css.h
+++ b/drivers/s390/cio/css.h
@@ -144,6 +144,7 @@
int css_sch_is_valid(struct schib *);
extern struct workqueue_struct *slow_path_wq;
+void css_wait_for_slow_path(void);
extern struct attribute_group *subch_attr_groups[];
#endif
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index fec004f..e0c7adb 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -577,7 +577,6 @@
static DEVICE_ATTR(cutype, 0444, cutype_show, NULL);
static DEVICE_ATTR(modalias, 0444, modalias_show, NULL);
static DEVICE_ATTR(online, 0644, online_show, online_store);
-extern struct device_attribute dev_attr_cmb_enable;
static DEVICE_ATTR(availability, 0444, available_show, NULL);
static struct attribute * subch_attrs[] = {
diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h
index d40a2ff..cb08092 100644
--- a/drivers/s390/cio/device.h
+++ b/drivers/s390/cio/device.h
@@ -127,4 +127,5 @@
void retry_set_schib(struct ccw_device *cdev);
void cmf_retry_copy_block(struct ccw_device *);
int cmf_reenable(struct ccw_device *);
+extern struct device_attribute dev_attr_cmb_enable;
#endif
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index 49b58eb..a1718a0 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -193,8 +193,15 @@
return -EACCES;
}
ret = cio_start_key (sch, cpa, lpm, key);
- if (ret == 0)
+ switch (ret) {
+ case 0:
cdev->private->intparm = intparm;
+ break;
+ case -EACCES:
+ case -ENODEV:
+ dev_fsm_event(cdev, DEV_EVENT_VERIFY);
+ break;
+ }
return ret;
}
diff --git a/drivers/s390/cio/device_status.c b/drivers/s390/cio/device_status.c
index ebe0848..4a38993 100644
--- a/drivers/s390/cio/device_status.c
+++ b/drivers/s390/cio/device_status.c
@@ -62,7 +62,7 @@
stsch (sch->schid, &sch->schib);
CIO_MSG_EVENT(0, "%s(0.%x.%04x) - path(s) %02x are "
- "not operational \n", __FUNCTION__,
+ "not operational \n", __func__,
sch->schid.ssid, sch->schid.sch_no,
sch->schib.pmcw.pnom);
@@ -312,6 +312,7 @@
{
struct subchannel *sch;
struct ccw1 *sense_ccw;
+ int rc;
sch = to_subchannel(cdev->dev.parent);
@@ -337,7 +338,10 @@
/* Reset internal retry indication. */
cdev->private->flags.intretry = 0;
- return cio_start(sch, sense_ccw, 0xff);
+ rc = cio_start(sch, sense_ccw, 0xff);
+ if (rc == -ENODEV || rc == -EACCES)
+ dev_fsm_event(cdev, DEV_EVENT_VERIFY);
+ return rc;
}
/*
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index 2b5bfb7..c359386 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -1399,7 +1399,7 @@
* q->dev_st_chg_ind is the indicator, be it shared or not.
* only clear it, if indicator is non-shared
*/
- if (!spare_ind_was_set)
+ if (q->dev_st_chg_ind != &spare_indicator)
tiqdio_clear_summary_bit((__u32*)q->dev_st_chg_ind);
if (q->hydra_gives_outbound_pcis) {
@@ -2217,9 +2217,78 @@
return cc;
}
+static int
+qdio_get_ssqd_information(struct subchannel_id *schid,
+ struct qdio_chsc_ssqd **ssqd_area)
+{
+ int result;
+
+ QDIO_DBF_TEXT0(0, setup, "getssqd");
+ *ssqd_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
+ if (!ssqd_area) {
+ QDIO_PRINT_WARN("Could not get memory for chsc on sch x%x.\n",
+ schid->sch_no);
+ return -ENOMEM;
+ }
+
+ (*ssqd_area)->request = (struct chsc_header) {
+ .length = 0x0010,
+ .code = 0x0024,
+ };
+ (*ssqd_area)->first_sch = schid->sch_no;
+ (*ssqd_area)->last_sch = schid->sch_no;
+ (*ssqd_area)->ssid = schid->ssid;
+ result = chsc(*ssqd_area);
+
+ if (result) {
+ QDIO_PRINT_WARN("CHSC returned cc %i on sch 0.%x.%x.\n",
+ result, schid->ssid, schid->sch_no);
+ goto out;
+ }
+
+ if ((*ssqd_area)->response.code != QDIO_CHSC_RESPONSE_CODE_OK) {
+ QDIO_PRINT_WARN("CHSC response is 0x%x on sch 0.%x.%x.\n",
+ (*ssqd_area)->response.code,
+ schid->ssid, schid->sch_no);
+ goto out;
+ }
+ if (!((*ssqd_area)->flags & CHSC_FLAG_QDIO_CAPABILITY) ||
+ !((*ssqd_area)->flags & CHSC_FLAG_VALIDITY) ||
+ ((*ssqd_area)->sch != schid->sch_no)) {
+ QDIO_PRINT_WARN("huh? problems checking out sch 0.%x.%x... " \
+ "using all SIGAs.\n",
+ schid->ssid, schid->sch_no);
+ goto out;
+ }
+ return 0;
+out:
+ return -EINVAL;
+}
+
+int
+qdio_get_ssqd_pct(struct ccw_device *cdev)
+{
+ struct qdio_chsc_ssqd *ssqd_area;
+ struct subchannel_id schid;
+ char dbf_text[15];
+ int rc;
+ int pct = 0;
+
+ QDIO_DBF_TEXT0(0, setup, "getpct");
+ schid = ccw_device_get_subchannel_id(cdev);
+ rc = qdio_get_ssqd_information(&schid, &ssqd_area);
+ if (!rc)
+ pct = (int)ssqd_area->pct;
+ if (rc != -ENOMEM)
+ mempool_free(ssqd_area, qdio_mempool_scssc);
+ sprintf(dbf_text, "pct: %d", pct);
+ QDIO_DBF_TEXT2(0, setup, dbf_text);
+ return pct;
+}
+EXPORT_SYMBOL(qdio_get_ssqd_pct);
+
static void
-qdio_check_subchannel_qebsm(struct qdio_irq *irq_ptr, unsigned char qdioac,
- unsigned long token)
+qdio_check_subchannel_qebsm(struct qdio_irq *irq_ptr, unsigned long token)
{
struct qdio_q *q;
int i;
@@ -2227,7 +2296,7 @@
char dbf_text[15];
/*check if QEBSM is disabled */
- if (!(irq_ptr->is_qebsm) || !(qdioac & 0x01)) {
+ if (!(irq_ptr->is_qebsm) || !(irq_ptr->qdioac & 0x01)) {
irq_ptr->is_qebsm = 0;
irq_ptr->sch_token = 0;
irq_ptr->qib.rflags &= ~QIB_RFLAGS_ENABLE_QEBSM;
@@ -2256,102 +2325,27 @@
}
static void
-qdio_get_ssqd_information(struct qdio_irq *irq_ptr)
+qdio_get_ssqd_siga(struct qdio_irq *irq_ptr)
{
- int result;
- unsigned char qdioac;
- struct {
- struct chsc_header request;
- u16 reserved1:10;
- u16 ssid:2;
- u16 fmt:4;
- u16 first_sch;
- u16 reserved2;
- u16 last_sch;
- u32 reserved3;
- struct chsc_header response;
- u32 reserved4;
- u8 flags;
- u8 reserved5;
- u16 sch;
- u8 qfmt;
- u8 parm;
- u8 qdioac1;
- u8 sch_class;
- u8 reserved7;
- u8 icnt;
- u8 reserved8;
- u8 ocnt;
- u8 reserved9;
- u8 mbccnt;
- u16 qdioac2;
- u64 sch_token;
- } *ssqd_area;
+ int rc;
+ struct qdio_chsc_ssqd *ssqd_area;
QDIO_DBF_TEXT0(0,setup,"getssqd");
- qdioac = 0;
- ssqd_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
- if (!ssqd_area) {
- QDIO_PRINT_WARN("Could not get memory for chsc. Using all " \
- "SIGAs for sch x%x.\n", irq_ptr->schid.sch_no);
+ irq_ptr->qdioac = 0;
+ rc = qdio_get_ssqd_information(&irq_ptr->schid, &ssqd_area);
+ if (rc) {
+ QDIO_PRINT_WARN("using all SIGAs for sch x%x.n",
+ irq_ptr->schid.sch_no);
irq_ptr->qdioac = CHSC_FLAG_SIGA_INPUT_NECESSARY |
CHSC_FLAG_SIGA_OUTPUT_NECESSARY |
CHSC_FLAG_SIGA_SYNC_NECESSARY; /* all flags set */
irq_ptr->is_qebsm = 0;
- irq_ptr->sch_token = 0;
- irq_ptr->qib.rflags &= ~QIB_RFLAGS_ENABLE_QEBSM;
- return;
- }
+ } else
+ irq_ptr->qdioac = ssqd_area->qdioac1;
- ssqd_area->request = (struct chsc_header) {
- .length = 0x0010,
- .code = 0x0024,
- };
- ssqd_area->first_sch = irq_ptr->schid.sch_no;
- ssqd_area->last_sch = irq_ptr->schid.sch_no;
- ssqd_area->ssid = irq_ptr->schid.ssid;
- result = chsc(ssqd_area);
-
- if (result) {
- QDIO_PRINT_WARN("CHSC returned cc %i. Using all " \
- "SIGAs for sch 0.%x.%x.\n", result,
- irq_ptr->schid.ssid, irq_ptr->schid.sch_no);
- qdioac = CHSC_FLAG_SIGA_INPUT_NECESSARY |
- CHSC_FLAG_SIGA_OUTPUT_NECESSARY |
- CHSC_FLAG_SIGA_SYNC_NECESSARY; /* all flags set */
- irq_ptr->is_qebsm = 0;
- goto out;
- }
-
- if (ssqd_area->response.code != QDIO_CHSC_RESPONSE_CODE_OK) {
- QDIO_PRINT_WARN("response upon checking SIGA needs " \
- "is 0x%x. Using all SIGAs for sch 0.%x.%x.\n",
- ssqd_area->response.code,
- irq_ptr->schid.ssid, irq_ptr->schid.sch_no);
- qdioac = CHSC_FLAG_SIGA_INPUT_NECESSARY |
- CHSC_FLAG_SIGA_OUTPUT_NECESSARY |
- CHSC_FLAG_SIGA_SYNC_NECESSARY; /* all flags set */
- irq_ptr->is_qebsm = 0;
- goto out;
- }
- if (!(ssqd_area->flags & CHSC_FLAG_QDIO_CAPABILITY) ||
- !(ssqd_area->flags & CHSC_FLAG_VALIDITY) ||
- (ssqd_area->sch != irq_ptr->schid.sch_no)) {
- QDIO_PRINT_WARN("huh? problems checking out sch 0.%x.%x... " \
- "using all SIGAs.\n",
- irq_ptr->schid.ssid, irq_ptr->schid.sch_no);
- qdioac = CHSC_FLAG_SIGA_INPUT_NECESSARY |
- CHSC_FLAG_SIGA_OUTPUT_NECESSARY |
- CHSC_FLAG_SIGA_SYNC_NECESSARY; /* worst case */
- irq_ptr->is_qebsm = 0;
- goto out;
- }
- qdioac = ssqd_area->qdioac1;
-out:
- qdio_check_subchannel_qebsm(irq_ptr, qdioac,
- ssqd_area->sch_token);
- mempool_free(ssqd_area, qdio_mempool_scssc);
- irq_ptr->qdioac = qdioac;
+ qdio_check_subchannel_qebsm(irq_ptr, ssqd_area->sch_token);
+ if (rc != -ENOMEM)
+ mempool_free(ssqd_area, qdio_mempool_scssc);
}
static unsigned int
@@ -3227,7 +3221,7 @@
return -EIO;
}
- qdio_get_ssqd_information(irq_ptr);
+ qdio_get_ssqd_siga(irq_ptr);
/* if this gets set once, we're running under VM and can omit SVSes */
if (irq_ptr->qdioac&CHSC_FLAG_SIGA_SYNC_NECESSARY)
omit_svs=1;
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index da8a272..c3df6b2 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -406,6 +406,34 @@
#define CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS 0x08
#define CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS 0x04
+struct qdio_chsc_ssqd {
+ struct chsc_header request;
+ u16 reserved1:10;
+ u16 ssid:2;
+ u16 fmt:4;
+ u16 first_sch;
+ u16 reserved2;
+ u16 last_sch;
+ u32 reserved3;
+ struct chsc_header response;
+ u32 reserved4;
+ u8 flags;
+ u8 reserved5;
+ u16 sch;
+ u8 qfmt;
+ u8 parm;
+ u8 qdioac1;
+ u8 sch_class;
+ u8 pct;
+ u8 icnt;
+ u8 reserved7;
+ u8 ocnt;
+ u8 reserved8;
+ u8 mbccnt;
+ u16 qdioac2;
+ u64 sch_token;
+};
+
struct qdio_perf_stats {
#ifdef CONFIG_64BIT
atomic64_t tl_runs;
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 7b0b819..a1ab3e3 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -45,7 +45,7 @@
static void ap_poll_thread_stop(void);
static void ap_request_timeout(unsigned long);
-/**
+/*
* Module description.
*/
MODULE_AUTHOR("IBM Corporation");
@@ -53,7 +53,7 @@
"Copyright 2006 IBM Corporation");
MODULE_LICENSE("GPL");
-/**
+/*
* Module parameter
*/
int ap_domain_index = -1; /* Adjunct Processor Domain Index */
@@ -69,7 +69,7 @@
static DEFINE_SPINLOCK(ap_device_lock);
static LIST_HEAD(ap_device_list);
-/**
+/*
* Workqueue & timer for bus rescan.
*/
static struct workqueue_struct *ap_work_queue;
@@ -77,7 +77,7 @@
static int ap_config_time = AP_CONFIG_TIME;
static DECLARE_WORK(ap_config_work, ap_scan_bus);
-/**
+/*
* Tasklet & timer for AP request polling.
*/
static struct timer_list ap_poll_timer = TIMER_INITIALIZER(ap_poll_timeout,0,0);
@@ -88,9 +88,9 @@
static DEFINE_MUTEX(ap_poll_thread_mutex);
/**
- * Test if ap instructions are available.
+ * ap_intructions_available() - Test if AP instructions are available.
*
- * Returns 0 if the ap instructions are installed.
+ * Returns 0 if the AP instructions are installed.
*/
static inline int ap_instructions_available(void)
{
@@ -108,12 +108,12 @@
}
/**
- * Test adjunct processor queue.
- * @qid: the ap queue number
- * @queue_depth: pointer to queue depth value
- * @device_type: pointer to device type value
+ * ap_test_queue(): Test adjunct processor queue.
+ * @qid: The AP queue number
+ * @queue_depth: Pointer to queue depth value
+ * @device_type: Pointer to device type value
*
- * Returns ap queue status structure.
+ * Returns AP queue status structure.
*/
static inline struct ap_queue_status
ap_test_queue(ap_qid_t qid, int *queue_depth, int *device_type)
@@ -130,10 +130,10 @@
}
/**
- * Reset adjunct processor queue.
- * @qid: the ap queue number
+ * ap_reset_queue(): Reset adjunct processor queue.
+ * @qid: The AP queue number
*
- * Returns ap queue status structure.
+ * Returns AP queue status structure.
*/
static inline struct ap_queue_status ap_reset_queue(ap_qid_t qid)
{
@@ -148,16 +148,14 @@
}
/**
- * Send message to adjunct processor queue.
- * @qid: the ap queue number
- * @psmid: the program supplied message identifier
- * @msg: the message text
- * @length: the message length
+ * __ap_send(): Send message to adjunct processor queue.
+ * @qid: The AP queue number
+ * @psmid: The program supplied message identifier
+ * @msg: The message text
+ * @length: The message length
*
- * Returns ap queue status structure.
- *
+ * Returns AP queue status structure.
* Condition code 1 on NQAP can't happen because the L bit is 1.
- *
* Condition code 2 on NQAP also means the send is incomplete,
* because a segment boundary was reached. The NQAP is repeated.
*/
@@ -198,23 +196,20 @@
}
EXPORT_SYMBOL(ap_send);
-/*
- * Receive message from adjunct processor queue.
- * @qid: the ap queue number
- * @psmid: pointer to program supplied message identifier
- * @msg: the message text
- * @length: the message length
+/**
+ * __ap_recv(): Receive message from adjunct processor queue.
+ * @qid: The AP queue number
+ * @psmid: Pointer to program supplied message identifier
+ * @msg: The message text
+ * @length: The message length
*
- * Returns ap queue status structure.
- *
+ * Returns AP queue status structure.
* Condition code 1 on DQAP means the receive has taken place
* but only partially. The response is incomplete, hence the
* DQAP is repeated.
- *
* Condition code 2 on DQAP also means the receive is incomplete,
* this time because a segment boundary was reached. Again, the
* DQAP is repeated.
- *
* Note that gpr2 is used by the DQAP instruction to keep track of
* any 'residual' length, in case the instruction gets interrupted.
* Hence it gets zeroed before the instruction.
@@ -263,11 +258,12 @@
EXPORT_SYMBOL(ap_recv);
/**
- * Check if an AP queue is available. The test is repeated for
- * AP_MAX_RESET times.
- * @qid: the ap queue number
- * @queue_depth: pointer to queue depth value
- * @device_type: pointer to device type value
+ * ap_query_queue(): Check if an AP queue is available.
+ * @qid: The AP queue number
+ * @queue_depth: Pointer to queue depth value
+ * @device_type: Pointer to device type value
+ *
+ * The test is repeated for AP_MAX_RESET times.
*/
static int ap_query_queue(ap_qid_t qid, int *queue_depth, int *device_type)
{
@@ -308,8 +304,10 @@
}
/**
+ * ap_init_queue(): Reset an AP queue.
+ * @qid: The AP queue number
+ *
* Reset an AP queue and wait for it to become available again.
- * @qid: the ap queue number
*/
static int ap_init_queue(ap_qid_t qid)
{
@@ -346,7 +344,10 @@
}
/**
- * Arm request timeout if a AP device was idle and a new request is submitted.
+ * ap_increase_queue_count(): Arm request timeout.
+ * @ap_dev: Pointer to an AP device.
+ *
+ * Arm request timeout if an AP device was idle and a new request is submitted.
*/
static void ap_increase_queue_count(struct ap_device *ap_dev)
{
@@ -360,7 +361,10 @@
}
/**
- * AP device is still alive, re-schedule request timeout if there are still
+ * ap_decrease_queue_count(): Decrease queue count.
+ * @ap_dev: Pointer to an AP device.
+ *
+ * If AP device is still alive, re-schedule request timeout if there are still
* pending requests.
*/
static void ap_decrease_queue_count(struct ap_device *ap_dev)
@@ -371,7 +375,7 @@
if (ap_dev->queue_count > 0)
mod_timer(&ap_dev->timeout, jiffies + timeout);
else
- /**
+ /*
* The timeout timer should to be disabled now - since
* del_timer_sync() is very expensive, we just tell via the
* reset flag to ignore the pending timeout timer.
@@ -379,7 +383,7 @@
ap_dev->reset = AP_RESET_IGNORE;
}
-/**
+/*
* AP device related attributes.
*/
static ssize_t ap_hwtype_show(struct device *dev,
@@ -433,6 +437,10 @@
};
/**
+ * ap_bus_match()
+ * @dev: Pointer to device
+ * @drv: Pointer to device_driver
+ *
* AP bus driver registration/unregistration.
*/
static int ap_bus_match(struct device *dev, struct device_driver *drv)
@@ -441,7 +449,7 @@
struct ap_driver *ap_drv = to_ap_drv(drv);
struct ap_device_id *id;
- /**
+ /*
* Compare device type of the device with the list of
* supported types of the device_driver.
*/
@@ -455,8 +463,12 @@
}
/**
- * uevent function for AP devices. It sets up a single environment
- * variable DEV_TYPE which contains the hardware device type.
+ * ap_uevent(): Uevent function for AP devices.
+ * @dev: Pointer to device
+ * @env: Pointer to kobj_uevent_env
+ *
+ * It sets up a single environment variable DEV_TYPE which contains the
+ * hardware device type.
*/
static int ap_uevent (struct device *dev, struct kobj_uevent_env *env)
{
@@ -500,8 +512,10 @@
}
/**
+ * __ap_flush_queue(): Flush requests.
+ * @ap_dev: Pointer to the AP device
+ *
* Flush all requests from the request/pending queue of an AP device.
- * @ap_dev: pointer to the AP device.
*/
static void __ap_flush_queue(struct ap_device *ap_dev)
{
@@ -565,7 +579,7 @@
}
EXPORT_SYMBOL(ap_driver_unregister);
-/**
+/*
* AP bus attributes.
*/
static ssize_t ap_domain_show(struct bus_type *bus, char *buf)
@@ -630,14 +644,16 @@
};
/**
- * Pick one of the 16 ap domains.
+ * ap_select_domain(): Select an AP domain.
+ *
+ * Pick one of the 16 AP domains.
*/
static int ap_select_domain(void)
{
int queue_depth, device_type, count, max_count, best_domain;
int rc, i, j;
- /**
+ /*
* We want to use a single domain. Either the one specified with
* the "domain=" parameter or the domain with the maximum number
* of devices.
@@ -669,8 +685,10 @@
}
/**
- * Find the device type if query queue returned a device type of 0.
+ * ap_probe_device_type(): Find the device type of an AP.
* @ap_dev: pointer to the AP device.
+ *
+ * Find the device type if query queue returned a device type of 0.
*/
static int ap_probe_device_type(struct ap_device *ap_dev)
{
@@ -764,7 +782,11 @@
}
/**
- * Scan the ap bus for new devices.
+ * __ap_scan_bus(): Scan the AP bus.
+ * @dev: Pointer to device
+ * @data: Pointer to data
+ *
+ * Scan the AP bus for new devices.
*/
static int __ap_scan_bus(struct device *dev, void *data)
{
@@ -867,6 +889,8 @@
}
/**
+ * ap_schedule_poll_timer(): Schedule poll timer.
+ *
* Set up the timer to run the poll tasklet
*/
static inline void ap_schedule_poll_timer(void)
@@ -877,10 +901,11 @@
}
/**
- * Receive pending reply messages from an AP device.
+ * ap_poll_read(): Receive pending reply messages from an AP device.
* @ap_dev: pointer to the AP device
* @flags: pointer to control flags, bit 2^0 is set if another poll is
* required, bit 2^1 is set if the poll timer needs to get armed
+ *
* Returns 0 if the device is still present, -ENODEV if not.
*/
static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags)
@@ -925,10 +950,11 @@
}
/**
- * Send messages from the request queue to an AP device.
+ * ap_poll_write(): Send messages from the request queue to an AP device.
* @ap_dev: pointer to the AP device
* @flags: pointer to control flags, bit 2^0 is set if another poll is
* required, bit 2^1 is set if the poll timer needs to get armed
+ *
* Returns 0 if the device is still present, -ENODEV if not.
*/
static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags)
@@ -968,11 +994,13 @@
}
/**
- * Poll AP device for pending replies and send new messages. If either
- * ap_poll_read or ap_poll_write returns -ENODEV unregister the device.
+ * ap_poll_queue(): Poll AP device for pending replies and send new messages.
* @ap_dev: pointer to the bus device
* @flags: pointer to control flags, bit 2^0 is set if another poll is
* required, bit 2^1 is set if the poll timer needs to get armed
+ *
+ * Poll AP device for pending replies and send new messages. If either
+ * ap_poll_read or ap_poll_write returns -ENODEV unregister the device.
* Returns 0.
*/
static inline int ap_poll_queue(struct ap_device *ap_dev, unsigned long *flags)
@@ -986,9 +1014,11 @@
}
/**
- * Queue a message to a device.
+ * __ap_queue_message(): Queue a message to a device.
* @ap_dev: pointer to the AP device
* @ap_msg: the message to be queued
+ *
+ * Queue a message to a device. Returns 0 if successful.
*/
static int __ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
{
@@ -1055,12 +1085,14 @@
EXPORT_SYMBOL(ap_queue_message);
/**
+ * ap_cancel_message(): Cancel a crypto request.
+ * @ap_dev: The AP device that has the message queued
+ * @ap_msg: The message that is to be removed
+ *
* Cancel a crypto request. This is done by removing the request
- * from the devive pendingq or requestq queue. Note that the
+ * from the device pending or request queue. Note that the
* request stays on the AP queue. When it finishes the message
* reply will be discarded because the psmid can't be found.
- * @ap_dev: AP device that has the message queued
- * @ap_msg: the message that is to be removed
*/
void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
{
@@ -1082,7 +1114,10 @@
EXPORT_SYMBOL(ap_cancel_message);
/**
- * AP receive polling for finished AP requests
+ * ap_poll_timeout(): AP receive polling for finished AP requests.
+ * @unused: Unused variable.
+ *
+ * Schedules the AP tasklet.
*/
static void ap_poll_timeout(unsigned long unused)
{
@@ -1090,6 +1125,9 @@
}
/**
+ * ap_reset(): Reset a not responding AP device.
+ * @ap_dev: Pointer to the AP device
+ *
* Reset a not responding AP device and move all requests from the
* pending queue to the request queue.
*/
@@ -1108,11 +1146,6 @@
ap_dev->unregistered = 1;
}
-/**
- * Poll all AP devices on the bus in a round robin fashion. Continue
- * polling until bit 2^0 of the control flags is not set. If bit 2^1
- * of the control flags has been set arm the poll timer.
- */
static int __ap_poll_all(struct ap_device *ap_dev, unsigned long *flags)
{
spin_lock(&ap_dev->lock);
@@ -1126,6 +1159,14 @@
return 0;
}
+/**
+ * ap_poll_all(): Poll all AP devices.
+ * @dummy: Unused variable
+ *
+ * Poll all AP devices on the bus in a round robin fashion. Continue
+ * polling until bit 2^0 of the control flags is not set. If bit 2^1
+ * of the control flags has been set arm the poll timer.
+ */
static void ap_poll_all(unsigned long dummy)
{
unsigned long flags;
@@ -1144,6 +1185,9 @@
}
/**
+ * ap_poll_thread(): Thread that polls for finished requests.
+ * @data: Unused pointer
+ *
* AP bus poll thread. The purpose of this thread is to poll for
* finished requests in a loop if there is a "free" cpu - that is
* a cpu that doesn't have anything better to do. The polling stops
@@ -1213,7 +1257,10 @@
}
/**
- * Handling of request timeouts
+ * ap_request_timeout(): Handling of request timeouts
+ * @data: Holds the AP device.
+ *
+ * Handles request timeouts.
*/
static void ap_request_timeout(unsigned long data)
{
@@ -1246,7 +1293,9 @@
};
/**
- * The module initialization code.
+ * ap_module_init(): The module initialization code.
+ *
+ * Initializes the module.
*/
int __init ap_module_init(void)
{
@@ -1288,7 +1337,7 @@
if (ap_select_domain() == 0)
ap_scan_bus(NULL);
- /* Setup the ap bus rescan timer. */
+ /* Setup the AP bus rescan timer. */
init_timer(&ap_config_timer);
ap_config_timer.function = ap_config_timeout;
ap_config_timer.data = 0;
@@ -1325,7 +1374,9 @@
}
/**
- * The module termination code
+ * ap_modules_exit(): The module termination code
+ *
+ * Terminates the module.
*/
void ap_module_exit(void)
{
diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
index 87c2d64..c1e1200 100644
--- a/drivers/s390/crypto/ap_bus.h
+++ b/drivers/s390/crypto/ap_bus.h
@@ -50,6 +50,15 @@
#define AP_QID_QUEUE(_qid) ((_qid) & 15)
/**
+ * structy ap_queue_status - Holds the AP queue status.
+ * @queue_empty: Shows if queue is empty
+ * @replies_waiting: Waiting replies
+ * @queue_full: Is 1 if the queue is full
+ * @pad: A 4 bit pad
+ * @int_enabled: Shows if interrupts are enabled for the AP
+ * @response_conde: Holds the 8 bit response code
+ * @pad2: A 16 bit pad
+ *
* The ap queue status word is returned by all three AP functions
* (PQAP, NQAP and DQAP). There's a set of flags in the first
* byte, followed by a 1 byte response code.
@@ -75,7 +84,7 @@
#define AP_RESPONSE_NO_FIRST_PART 0x13
#define AP_RESPONSE_MESSAGE_TOO_BIG 0x15
-/**
+/*
* Known device types
*/
#define AP_DEVICE_TYPE_PCICC 3
@@ -84,7 +93,7 @@
#define AP_DEVICE_TYPE_CEX2A 6
#define AP_DEVICE_TYPE_CEX2C 7
-/**
+/*
* AP reset flag states
*/
#define AP_RESET_IGNORE 0 /* request timeout will be ignored */
@@ -152,7 +161,7 @@
.dev_type=(dt), \
.match_flags=AP_DEVICE_ID_MATCH_DEVICE_TYPE,
-/**
+/*
* Note: don't use ap_send/ap_recv after using ap_queue_message
* for the first time. Otherwise the ap message queue will get
* confused.
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index e3625a4..4d36e80 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -36,10 +36,11 @@
#include <linux/compat.h>
#include <asm/atomic.h>
#include <asm/uaccess.h>
+#include <linux/hw_random.h>
#include "zcrypt_api.h"
-/**
+/*
* Module description.
*/
MODULE_AUTHOR("IBM Corporation");
@@ -52,7 +53,10 @@
static int zcrypt_device_count = 0;
static atomic_t zcrypt_open_count = ATOMIC_INIT(0);
-/**
+static int zcrypt_rng_device_add(void);
+static void zcrypt_rng_device_remove(void);
+
+/*
* Device attributes common for all crypto devices.
*/
static ssize_t zcrypt_type_show(struct device *dev,
@@ -99,6 +103,9 @@
};
/**
+ * __zcrypt_increase_preference(): Increase preference of a crypto device.
+ * @zdev: Pointer the crypto device
+ *
* Move the device towards the head of the device list.
* Need to be called while holding the zcrypt device list lock.
* Note: cards with speed_rating of 0 are kept at the end of the list.
@@ -125,6 +132,9 @@
}
/**
+ * __zcrypt_decrease_preference(): Decrease preference of a crypto device.
+ * @zdev: Pointer to a crypto device.
+ *
* Move the device towards the tail of the device list.
* Need to be called while holding the zcrypt device list lock.
* Note: cards with speed_rating of 0 are kept at the end of the list.
@@ -198,7 +208,10 @@
EXPORT_SYMBOL(zcrypt_device_free);
/**
- * Register a crypto device.
+ * zcrypt_device_register() - Register a crypto device.
+ * @zdev: Pointer to a crypto device
+ *
+ * Register a crypto device. Returns 0 if successful.
*/
int zcrypt_device_register(struct zcrypt_device *zdev)
{
@@ -216,16 +229,37 @@
__zcrypt_increase_preference(zdev);
zcrypt_device_count++;
spin_unlock_bh(&zcrypt_device_lock);
+ if (zdev->ops->rng) {
+ rc = zcrypt_rng_device_add();
+ if (rc)
+ goto out_unregister;
+ }
+ return 0;
+
+out_unregister:
+ spin_lock_bh(&zcrypt_device_lock);
+ zcrypt_device_count--;
+ list_del_init(&zdev->list);
+ spin_unlock_bh(&zcrypt_device_lock);
+ sysfs_remove_group(&zdev->ap_dev->device.kobj,
+ &zcrypt_device_attr_group);
+ put_device(&zdev->ap_dev->device);
+ zcrypt_device_put(zdev);
out:
return rc;
}
EXPORT_SYMBOL(zcrypt_device_register);
/**
+ * zcrypt_device_unregister(): Unregister a crypto device.
+ * @zdev: Pointer to crypto device
+ *
* Unregister a crypto device.
*/
void zcrypt_device_unregister(struct zcrypt_device *zdev)
{
+ if (zdev->ops->rng)
+ zcrypt_rng_device_remove();
spin_lock_bh(&zcrypt_device_lock);
zcrypt_device_count--;
list_del_init(&zdev->list);
@@ -238,7 +272,9 @@
EXPORT_SYMBOL(zcrypt_device_unregister);
/**
- * zcrypt_read is not be supported beyond zcrypt 1.3.1
+ * zcrypt_read (): Not supported beyond zcrypt 1.3.1.
+ *
+ * This function is not supported beyond zcrypt 1.3.1.
*/
static ssize_t zcrypt_read(struct file *filp, char __user *buf,
size_t count, loff_t *f_pos)
@@ -247,6 +283,8 @@
}
/**
+ * zcrypt_write(): Not allowed.
+ *
* Write is is not allowed
*/
static ssize_t zcrypt_write(struct file *filp, const char __user *buf,
@@ -256,7 +294,9 @@
}
/**
- * Device open/close functions to count number of users.
+ * zcrypt_open(): Count number of users.
+ *
+ * Device open function to count number of users.
*/
static int zcrypt_open(struct inode *inode, struct file *filp)
{
@@ -264,13 +304,18 @@
return 0;
}
+/**
+ * zcrypt_release(): Count number of users.
+ *
+ * Device close function to count number of users.
+ */
static int zcrypt_release(struct inode *inode, struct file *filp)
{
atomic_dec(&zcrypt_open_count);
return 0;
}
-/**
+/*
* zcrypt ioctls.
*/
static long zcrypt_rsa_modexpo(struct ica_rsa_modexpo *mex)
@@ -280,7 +325,7 @@
if (mex->outputdatalength < mex->inputdatalength)
return -EINVAL;
- /**
+ /*
* As long as outputdatalength is big enough, we can set the
* outputdatalength equal to the inputdatalength, since that is the
* number of bytes we will copy in any case
@@ -326,7 +371,7 @@
if (crt->outputdatalength < crt->inputdatalength ||
(crt->inputdatalength & 1))
return -EINVAL;
- /**
+ /*
* As long as outputdatalength is big enough, we can set the
* outputdatalength equal to the inputdatalength, since that is the
* number of bytes we will copy in any case
@@ -343,7 +388,7 @@
zdev->max_mod_size < crt->inputdatalength)
continue;
if (zdev->short_crt && crt->inputdatalength > 240) {
- /**
+ /*
* Check inputdata for leading zeros for cards
* that can't handle np_prime, bp_key, or
* u_mult_inv > 128 bytes.
@@ -359,7 +404,7 @@
copy_from_user(&z3, crt->u_mult_inv, len))
return -EFAULT;
copied = 1;
- /**
+ /*
* We have to restart device lookup -
* the device list may have changed by now.
*/
@@ -427,6 +472,37 @@
return -ENODEV;
}
+static long zcrypt_rng(char *buffer)
+{
+ struct zcrypt_device *zdev;
+ int rc;
+
+ spin_lock_bh(&zcrypt_device_lock);
+ list_for_each_entry(zdev, &zcrypt_device_list, list) {
+ if (!zdev->online || !zdev->ops->rng)
+ continue;
+ zcrypt_device_get(zdev);
+ get_device(&zdev->ap_dev->device);
+ zdev->request_count++;
+ __zcrypt_decrease_preference(zdev);
+ if (try_module_get(zdev->ap_dev->drv->driver.owner)) {
+ spin_unlock_bh(&zcrypt_device_lock);
+ rc = zdev->ops->rng(zdev, buffer);
+ spin_lock_bh(&zcrypt_device_lock);
+ module_put(zdev->ap_dev->drv->driver.owner);
+ } else
+ rc = -EAGAIN;
+ zdev->request_count--;
+ __zcrypt_increase_preference(zdev);
+ put_device(&zdev->ap_dev->device);
+ zcrypt_device_put(zdev);
+ spin_unlock_bh(&zcrypt_device_lock);
+ return rc;
+ }
+ spin_unlock_bh(&zcrypt_device_lock);
+ return -ENODEV;
+}
+
static void zcrypt_status_mask(char status[AP_DEVICES])
{
struct zcrypt_device *zdev;
@@ -514,6 +590,8 @@
}
/**
+ * zcrypt_ica_status(): Old, depracted combi status call.
+ *
* Old, deprecated combi status call.
*/
static long zcrypt_ica_status(struct file *filp, unsigned long arg)
@@ -615,7 +693,7 @@
(int __user *) arg);
case Z90STAT_DOMAIN_INDEX:
return put_user(ap_domain_index, (int __user *) arg);
- /**
+ /*
* Deprecated ioctls. Don't add another device count ioctl,
* you can count them yourself in the user space with the
* output of the Z90STAT_STATUS_MASK ioctl.
@@ -653,7 +731,7 @@
}
#ifdef CONFIG_COMPAT
-/**
+/*
* ioctl32 conversion routines
*/
struct compat_ica_rsa_modexpo {
@@ -804,7 +882,7 @@
}
#endif
-/**
+/*
* Misc device file operations.
*/
static const struct file_operations zcrypt_fops = {
@@ -819,7 +897,7 @@
.release = zcrypt_release
};
-/**
+/*
* Misc device.
*/
static struct miscdevice zcrypt_misc_device = {
@@ -828,7 +906,7 @@
.fops = &zcrypt_fops,
};
-/**
+/*
* Deprecated /proc entry support.
*/
static struct proc_dir_entry *zcrypt_entry;
@@ -1022,7 +1100,7 @@
}
for (j = 0; j < 64 && *ptr; ptr++) {
- /**
+ /*
* '0' for no device, '1' for PCICA, '2' for PCICC,
* '3' for PCIXCC_MCL2, '4' for PCIXCC_MCL3,
* '5' for CEX2C and '6' for CEX2A'
@@ -1041,7 +1119,76 @@
return count;
}
+static int zcrypt_rng_device_count;
+static u32 *zcrypt_rng_buffer;
+static int zcrypt_rng_buffer_index;
+static DEFINE_MUTEX(zcrypt_rng_mutex);
+
+static int zcrypt_rng_data_read(struct hwrng *rng, u32 *data)
+{
+ int rc;
+
+ /*
+ * We don't need locking here because the RNG API guarantees serialized
+ * read method calls.
+ */
+ if (zcrypt_rng_buffer_index == 0) {
+ rc = zcrypt_rng((char *) zcrypt_rng_buffer);
+ if (rc < 0)
+ return -EIO;
+ zcrypt_rng_buffer_index = rc / sizeof *data;
+ }
+ *data = zcrypt_rng_buffer[--zcrypt_rng_buffer_index];
+ return sizeof *data;
+}
+
+static struct hwrng zcrypt_rng_dev = {
+ .name = "zcrypt",
+ .data_read = zcrypt_rng_data_read,
+};
+
+static int zcrypt_rng_device_add(void)
+{
+ int rc = 0;
+
+ mutex_lock(&zcrypt_rng_mutex);
+ if (zcrypt_rng_device_count == 0) {
+ zcrypt_rng_buffer = (u32 *) get_zeroed_page(GFP_KERNEL);
+ if (!zcrypt_rng_buffer) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ zcrypt_rng_buffer_index = 0;
+ rc = hwrng_register(&zcrypt_rng_dev);
+ if (rc)
+ goto out_free;
+ zcrypt_rng_device_count = 1;
+ } else
+ zcrypt_rng_device_count++;
+ mutex_unlock(&zcrypt_rng_mutex);
+ return 0;
+
+out_free:
+ free_page((unsigned long) zcrypt_rng_buffer);
+out:
+ mutex_unlock(&zcrypt_rng_mutex);
+ return rc;
+}
+
+static void zcrypt_rng_device_remove(void)
+{
+ mutex_lock(&zcrypt_rng_mutex);
+ zcrypt_rng_device_count--;
+ if (zcrypt_rng_device_count == 0) {
+ hwrng_unregister(&zcrypt_rng_dev);
+ free_page((unsigned long) zcrypt_rng_buffer);
+ }
+ mutex_unlock(&zcrypt_rng_mutex);
+}
+
/**
+ * zcrypt_api_init(): Module initialization.
+ *
* The module initialization code.
*/
int __init zcrypt_api_init(void)
@@ -1076,6 +1223,8 @@
}
/**
+ * zcrypt_api_exit(): Module termination.
+ *
* The module termination code.
*/
void zcrypt_api_exit(void)
diff --git a/drivers/s390/crypto/zcrypt_api.h b/drivers/s390/crypto/zcrypt_api.h
index de4877e..5c6e222 100644
--- a/drivers/s390/crypto/zcrypt_api.h
+++ b/drivers/s390/crypto/zcrypt_api.h
@@ -43,17 +43,17 @@
#define DEV_NAME "zcrypt"
#define PRINTK(fmt, args...) \
- printk(KERN_DEBUG DEV_NAME ": %s -> " fmt, __FUNCTION__ , ## args)
+ printk(KERN_DEBUG DEV_NAME ": %s -> " fmt, __func__ , ## args)
#define PRINTKN(fmt, args...) \
printk(KERN_DEBUG DEV_NAME ": " fmt, ## args)
#define PRINTKW(fmt, args...) \
- printk(KERN_WARNING DEV_NAME ": %s -> " fmt, __FUNCTION__ , ## args)
+ printk(KERN_WARNING DEV_NAME ": %s -> " fmt, __func__ , ## args)
#define PRINTKC(fmt, args...) \
- printk(KERN_CRIT DEV_NAME ": %s -> " fmt, __FUNCTION__ , ## args)
+ printk(KERN_CRIT DEV_NAME ": %s -> " fmt, __func__ , ## args)
#ifdef ZCRYPT_DEBUG
#define PDEBUG(fmt, args...) \
- printk(KERN_DEBUG DEV_NAME ": %s -> " fmt, __FUNCTION__ , ## args)
+ printk(KERN_DEBUG DEV_NAME ": %s -> " fmt, __func__ , ## args)
#else
#define PDEBUG(fmt, args...) do {} while (0)
#endif
@@ -100,6 +100,13 @@
#define ZCRYPT_CEX2C 5
#define ZCRYPT_CEX2A 6
+/**
+ * Large random numbers are pulled in 4096 byte chunks from the crypto cards
+ * and stored in a page. Be carefull when increasing this buffer due to size
+ * limitations for AP requests.
+ */
+#define ZCRYPT_RNG_BUFFER_SIZE 4096
+
struct zcrypt_device;
struct zcrypt_ops {
@@ -107,6 +114,7 @@
long (*rsa_modexpo_crt)(struct zcrypt_device *,
struct ica_rsa_modexpo_crt *);
long (*send_cprb)(struct zcrypt_device *, struct ica_xcRB *);
+ long (*rng)(struct zcrypt_device *, char *);
};
struct zcrypt_device {
diff --git a/drivers/s390/crypto/zcrypt_cca_key.h b/drivers/s390/crypto/zcrypt_cca_key.h
index 8dbcf0e..ed82f2f 100644
--- a/drivers/s390/crypto/zcrypt_cca_key.h
+++ b/drivers/s390/crypto/zcrypt_cca_key.h
@@ -174,7 +174,7 @@
key->pvtMeHdr = static_pvt_me_hdr;
key->pvtMeSec = static_pvt_me_sec;
key->pubMeSec = static_pub_me_sec;
- /**
+ /*
* In a private key, the modulus doesn't appear in the public
* section. So, an arbitrary public exponent of 0x010001 will be
* used.
@@ -338,7 +338,7 @@
pub = (struct cca_public_sec *)(key->key_parts + key_len);
*pub = static_cca_pub_sec;
pub->modulus_bit_len = 8 * crt->inputdatalength;
- /**
+ /*
* In a private key, the modulus doesn't appear in the public
* section. So, an arbitrary public exponent of 0x010001 will be
* used.
diff --git a/drivers/s390/crypto/zcrypt_error.h b/drivers/s390/crypto/zcrypt_error.h
index 2cb616b..3e27fe7 100644
--- a/drivers/s390/crypto/zcrypt_error.h
+++ b/drivers/s390/crypto/zcrypt_error.h
@@ -108,7 +108,7 @@
return -EINVAL;
case REP82_ERROR_MESSAGE_TYPE:
// REP88_ERROR_MESSAGE_TYPE // '20' CEX2A
- /**
+ /*
* To sent a message of the wrong type is a bug in the
* device driver. Warn about it, disable the device
* and then repeat the request.
diff --git a/drivers/s390/crypto/zcrypt_pcicc.c b/drivers/s390/crypto/zcrypt_pcicc.c
index d6d59bf..17ea56c 100644
--- a/drivers/s390/crypto/zcrypt_pcicc.c
+++ b/drivers/s390/crypto/zcrypt_pcicc.c
@@ -42,7 +42,7 @@
#define PCICC_MAX_MOD_SIZE_OLD 128 /* 1024 bits */
#define PCICC_MAX_MOD_SIZE 256 /* 2048 bits */
-/**
+/*
* PCICC cards need a speed rating of 0. This keeps them at the end of
* the zcrypt device list (see zcrypt_api.c). PCICC cards are only
* used if no other cards are present because they are slow and can only
@@ -388,7 +388,7 @@
reply_len = le16_to_cpu(msg->length) - 2;
if (reply_len > outputdatalength)
return -EINVAL;
- /**
+ /*
* For all encipher requests, the length of the ciphertext (reply_len)
* will always equal the modulus length. For MEX decipher requests
* the output needs to get padded. Minimum pad size is 10.
diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c
index 70b9ddc..0bc9b31 100644
--- a/drivers/s390/crypto/zcrypt_pcixcc.c
+++ b/drivers/s390/crypto/zcrypt_pcixcc.c
@@ -356,6 +356,55 @@
}
/**
+ * Prepare a type6 CPRB message for random number generation
+ *
+ * @ap_dev: AP device pointer
+ * @ap_msg: pointer to AP message
+ */
+static void rng_type6CPRB_msgX(struct ap_device *ap_dev,
+ struct ap_message *ap_msg,
+ unsigned random_number_length)
+{
+ struct {
+ struct type6_hdr hdr;
+ struct CPRBX cprbx;
+ char function_code[2];
+ short int rule_length;
+ char rule[8];
+ short int verb_length;
+ short int key_length;
+ } __attribute__((packed)) *msg = ap_msg->message;
+ static struct type6_hdr static_type6_hdrX = {
+ .type = 0x06,
+ .offset1 = 0x00000058,
+ .agent_id = {'C', 'A'},
+ .function_code = {'R', 'L'},
+ .ToCardLen1 = sizeof *msg - sizeof(msg->hdr),
+ .FromCardLen1 = sizeof *msg - sizeof(msg->hdr),
+ };
+ static struct CPRBX static_cprbx = {
+ .cprb_len = 0x00dc,
+ .cprb_ver_id = 0x02,
+ .func_id = {0x54, 0x32},
+ .req_parml = sizeof *msg - sizeof(msg->hdr) -
+ sizeof(msg->cprbx),
+ .rpl_msgbl = sizeof *msg - sizeof(msg->hdr),
+ };
+
+ msg->hdr = static_type6_hdrX;
+ msg->hdr.FromCardLen2 = random_number_length,
+ msg->cprbx = static_cprbx;
+ msg->cprbx.rpl_datal = random_number_length,
+ msg->cprbx.domain = AP_QID_QUEUE(ap_dev->qid);
+ memcpy(msg->function_code, msg->hdr.function_code, 0x02);
+ msg->rule_length = 0x0a;
+ memcpy(msg->rule, "RANDOM ", 8);
+ msg->verb_length = 0x02;
+ msg->key_length = 0x02;
+ ap_msg->length = sizeof *msg;
+}
+
+/**
* Copy results from a type 86 ICA reply message back to user space.
*
* @zdev: crypto device pointer
@@ -452,7 +501,7 @@
reply_len = msg->length - 2;
if (reply_len > outputdatalength)
return -EINVAL;
- /**
+ /*
* For all encipher requests, the length of the ciphertext (reply_len)
* will always equal the modulus length. For MEX decipher requests
* the output needs to get padded. Minimum pad size is 10.
@@ -509,6 +558,26 @@
return 0;
}
+static int convert_type86_rng(struct zcrypt_device *zdev,
+ struct ap_message *reply,
+ char *buffer)
+{
+ struct {
+ struct type86_hdr hdr;
+ struct type86_fmt2_ext fmt2;
+ struct CPRBX cprbx;
+ } __attribute__((packed)) *msg = reply->message;
+ char *data = reply->message;
+
+ if (msg->cprbx.ccp_rtcode != 0 || msg->cprbx.ccp_rscode != 0) {
+ PDEBUG("RNG response error on PCIXCC/CEX2C rc=%hu/rs=%hu\n",
+ rc, rs);
+ return -EINVAL;
+ }
+ memcpy(buffer, data + msg->fmt2.offset2, msg->fmt2.count2);
+ return msg->fmt2.count2;
+}
+
static int convert_response_ica(struct zcrypt_device *zdev,
struct ap_message *reply,
char __user *outputdata,
@@ -567,6 +636,31 @@
}
}
+static int convert_response_rng(struct zcrypt_device *zdev,
+ struct ap_message *reply,
+ char *data)
+{
+ struct type86x_reply *msg = reply->message;
+
+ switch (msg->hdr.type) {
+ case TYPE82_RSP_CODE:
+ case TYPE88_RSP_CODE:
+ return -EINVAL;
+ case TYPE86_RSP_CODE:
+ if (msg->hdr.reply_code)
+ return -EINVAL;
+ if (msg->cprbx.cprb_ver_id == 0x02)
+ return convert_type86_rng(zdev, reply, data);
+ /* no break, incorrect cprb version is an unknown response */
+ default: /* Unknown response type, this should NEVER EVER happen */
+ PRINTK("Unrecognized Message Header: %08x%08x\n",
+ *(unsigned int *) reply->message,
+ *(unsigned int *) (reply->message+4));
+ zdev->online = 0;
+ return -EAGAIN; /* repeat the request on a different device. */
+ }
+}
+
/**
* This function is called from the AP bus code after a crypto request
* "msg" has finished with the reply message "reply".
@@ -736,6 +830,42 @@
}
/**
+ * The request distributor calls this function if it picked the PCIXCC/CEX2C
+ * device to generate random data.
+ * @zdev: pointer to zcrypt_device structure that identifies the
+ * PCIXCC/CEX2C device to the request distributor
+ * @buffer: pointer to a memory page to return random data
+ */
+
+static long zcrypt_pcixcc_rng(struct zcrypt_device *zdev,
+ char *buffer)
+{
+ struct ap_message ap_msg;
+ struct response_type resp_type = {
+ .type = PCIXCC_RESPONSE_TYPE_XCRB,
+ };
+ int rc;
+
+ ap_msg.message = kmalloc(PCIXCC_MAX_XCRB_MESSAGE_SIZE, GFP_KERNEL);
+ if (!ap_msg.message)
+ return -ENOMEM;
+ ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
+ atomic_inc_return(&zcrypt_step);
+ ap_msg.private = &resp_type;
+ rng_type6CPRB_msgX(zdev->ap_dev, &ap_msg, ZCRYPT_RNG_BUFFER_SIZE);
+ init_completion(&resp_type.work);
+ ap_queue_message(zdev->ap_dev, &ap_msg);
+ rc = wait_for_completion_interruptible(&resp_type.work);
+ if (rc == 0)
+ rc = convert_response_rng(zdev, &ap_msg, buffer);
+ else
+ /* Signal pending. */
+ ap_cancel_message(zdev->ap_dev, &ap_msg);
+ kfree(ap_msg.message);
+ return rc;
+}
+
+/**
* The crypto operations for a PCIXCC/CEX2C card.
*/
static struct zcrypt_ops zcrypt_pcixcc_ops = {
@@ -744,6 +874,13 @@
.send_cprb = zcrypt_pcixcc_send_cprb,
};
+static struct zcrypt_ops zcrypt_pcixcc_with_rng_ops = {
+ .rsa_modexpo = zcrypt_pcixcc_modexpo,
+ .rsa_modexpo_crt = zcrypt_pcixcc_modexpo_crt,
+ .send_cprb = zcrypt_pcixcc_send_cprb,
+ .rng = zcrypt_pcixcc_rng,
+};
+
/**
* Micro-code detection function. Its sends a message to a pcixcc card
* to find out the microcode level.
@@ -859,6 +996,58 @@
}
/**
+ * Large random number detection function. Its sends a message to a pcixcc
+ * card to find out if large random numbers are supported.
+ * @ap_dev: pointer to the AP device.
+ *
+ * Returns 1 if large random numbers are supported, 0 if not and < 0 on error.
+ */
+static int zcrypt_pcixcc_rng_supported(struct ap_device *ap_dev)
+{
+ struct ap_message ap_msg;
+ unsigned long long psmid;
+ struct {
+ struct type86_hdr hdr;
+ struct type86_fmt2_ext fmt2;
+ struct CPRBX cprbx;
+ } __attribute__((packed)) *reply;
+ int rc, i;
+
+ ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
+ if (!ap_msg.message)
+ return -ENOMEM;
+
+ rng_type6CPRB_msgX(ap_dev, &ap_msg, 4);
+ rc = ap_send(ap_dev->qid, 0x0102030405060708ULL, ap_msg.message,
+ ap_msg.length);
+ if (rc)
+ goto out_free;
+
+ /* Wait for the test message to complete. */
+ for (i = 0; i < 2 * HZ; i++) {
+ msleep(1000 / HZ);
+ rc = ap_recv(ap_dev->qid, &psmid, ap_msg.message, 4096);
+ if (rc == 0 && psmid == 0x0102030405060708ULL)
+ break;
+ }
+
+ if (i >= 2 * HZ) {
+ /* Got no answer. */
+ rc = -ENODEV;
+ goto out_free;
+ }
+
+ reply = ap_msg.message;
+ if (reply->cprbx.ccp_rtcode == 0 && reply->cprbx.ccp_rscode == 0)
+ rc = 1;
+ else
+ rc = 0;
+out_free:
+ free_page((unsigned long) ap_msg.message);
+ return rc;
+}
+
+/**
* Probe function for PCIXCC/CEX2C cards. It always accepts the AP device
* since the bus_match already checked the hardware type. The PCIXCC
* cards come in two flavours: micro code level 2 and micro code level 3.
@@ -874,7 +1063,6 @@
if (!zdev)
return -ENOMEM;
zdev->ap_dev = ap_dev;
- zdev->ops = &zcrypt_pcixcc_ops;
zdev->online = 1;
if (ap_dev->device_type == AP_DEVICE_TYPE_PCIXCC) {
rc = zcrypt_pcixcc_mcl(ap_dev);
@@ -901,6 +1089,15 @@
zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE;
zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE;
}
+ rc = zcrypt_pcixcc_rng_supported(ap_dev);
+ if (rc < 0) {
+ zcrypt_device_free(zdev);
+ return rc;
+ }
+ if (rc)
+ zdev->ops = &zcrypt_pcixcc_with_rng_ops;
+ else
+ zdev->ops = &zcrypt_pcixcc_ops;
ap_dev->reply = &zdev->reply;
ap_dev->private = zdev;
rc = zcrypt_device_register(zdev);
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index d8a5c22..04a1d7b 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -299,7 +299,7 @@
struct claw_privbk *privptr=NULL;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s Enter\n",__FUNCTION__);
+ printk(KERN_INFO "%s Enter\n",__func__);
#endif
CLAW_DBF_TEXT(2,setup,"probe");
if (!get_device(&cgdev->dev))
@@ -313,7 +313,7 @@
probe_error(cgdev);
put_device(&cgdev->dev);
printk(KERN_WARNING "Out of memory %s %s Exit Line %d \n",
- cgdev->cdev[0]->dev.bus_id,__FUNCTION__,__LINE__);
+ cgdev->cdev[0]->dev.bus_id,__func__,__LINE__);
CLAW_DBF_TEXT_(2,setup,"probex%d",-ENOMEM);
return -ENOMEM;
}
@@ -323,7 +323,7 @@
probe_error(cgdev);
put_device(&cgdev->dev);
printk(KERN_WARNING "Out of memory %s %s Exit Line %d \n",
- cgdev->cdev[0]->dev.bus_id,__FUNCTION__,__LINE__);
+ cgdev->cdev[0]->dev.bus_id,__func__,__LINE__);
CLAW_DBF_TEXT_(2,setup,"probex%d",-ENOMEM);
return -ENOMEM;
}
@@ -340,7 +340,7 @@
probe_error(cgdev);
put_device(&cgdev->dev);
printk(KERN_WARNING "add_files failed %s %s Exit Line %d \n",
- cgdev->cdev[0]->dev.bus_id,__FUNCTION__,__LINE__);
+ cgdev->cdev[0]->dev.bus_id,__func__,__LINE__);
CLAW_DBF_TEXT_(2,setup,"probex%d",rc);
return rc;
}
@@ -351,7 +351,7 @@
cgdev->dev.driver_data = privptr;
#ifdef FUNCTRACE
printk(KERN_INFO "claw:%s exit on line %d, "
- "rc = 0\n",__FUNCTION__,__LINE__);
+ "rc = 0\n",__func__,__LINE__);
#endif
CLAW_DBF_TEXT(2,setup,"prbext 0");
@@ -371,7 +371,7 @@
struct chbk *p_ch;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s enter\n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(4,trace,"claw_tx");
p_ch=&privptr->channel[WRITE];
@@ -381,7 +381,7 @@
privptr->stats.tx_dropped++;
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() exit on line %d, rc = EIO\n",
- dev->name,__FUNCTION__, __LINE__);
+ dev->name,__func__, __LINE__);
#endif
CLAW_DBF_TEXT_(2,trace,"clawtx%d",-EIO);
return -EIO;
@@ -398,7 +398,7 @@
spin_unlock_irqrestore(get_ccwdev_lock(p_ch->cdev), saveflags);
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s exit on line %d, rc = %d\n",
- dev->name, __FUNCTION__, __LINE__, rc);
+ dev->name, __func__, __LINE__, rc);
#endif
CLAW_DBF_TEXT_(4,trace,"clawtx%d",rc);
return rc;
@@ -460,7 +460,7 @@
#ifdef IOTRACE
printk(KERN_INFO "%s: %s() Packed %d len %d\n",
p_env->ndev->name,
- __FUNCTION__,pkt_cnt,new_skb->len);
+ __func__,pkt_cnt,new_skb->len);
#endif
}
CLAW_DBF_TEXT(4,trace,"PackSKBx");
@@ -478,7 +478,7 @@
struct claw_privbk *privptr=dev->priv;
int buff_size;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter \n",dev->name,__func__);
#endif
#ifdef DEBUGMSG
printk(KERN_INFO "variable dev =\n");
@@ -491,14 +491,14 @@
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d, rc=EINVAL\n",
dev->name,
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
#endif
return -EINVAL;
}
dev->mtu = new_mtu;
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",dev->name,
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
#endif
return 0;
} /* end of claw_change_mtu */
@@ -522,7 +522,7 @@
struct ccwbk *p_buf;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter \n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(4,trace,"open");
if (!dev || (dev->name[0] == 0x00)) {
@@ -537,7 +537,7 @@
if (rc) {
printk(KERN_INFO "%s:%s Exit on line %d, rc=ENOMEM\n",
dev->name,
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
CLAW_DBF_TEXT(2,trace,"openmem");
return -ENOMEM;
}
@@ -661,7 +661,7 @@
claw_clear_busy(dev);
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d, rc=EIO\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(2,trace,"open EIO");
return -EIO;
@@ -673,7 +673,7 @@
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d, rc=0\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"openok");
return 0;
@@ -696,7 +696,7 @@
#ifdef FUNCTRACE
- printk(KERN_INFO "%s enter \n",__FUNCTION__);
+ printk(KERN_INFO "%s enter \n",__func__);
#endif
CLAW_DBF_TEXT(4,trace,"clawirq");
/* Bypass all 'unsolicited interrupts' */
@@ -706,7 +706,7 @@
cdev->dev.bus_id,irb->scsw.cstat, irb->scsw.dstat);
#ifdef FUNCTRACE
printk(KERN_INFO "claw: %s() "
- "exit on line %d\n",__FUNCTION__,__LINE__);
+ "exit on line %d\n",__func__,__LINE__);
#endif
CLAW_DBF_TEXT(2,trace,"badirq");
return;
@@ -752,7 +752,7 @@
#endif
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(2,trace,"chanchk");
/* return; */
@@ -777,7 +777,7 @@
(SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND)))) {
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return;
}
@@ -788,7 +788,7 @@
#endif
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"stop");
return;
@@ -804,7 +804,7 @@
(SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND)))) {
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"haltio");
return;
@@ -838,7 +838,7 @@
#endif
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"haltio");
return;
@@ -858,7 +858,7 @@
}
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"notrdy");
return;
@@ -874,7 +874,7 @@
}
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"PCI_read");
return;
@@ -885,7 +885,7 @@
(SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND)))) {
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"SPend_rd");
return;
@@ -906,7 +906,7 @@
#endif
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"RdIRQXit");
return;
@@ -929,7 +929,7 @@
}
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"rstrtwrt");
return;
@@ -946,7 +946,7 @@
(SCSW_STCTL_ALERT_STATUS | SCSW_STCTL_STATUS_PEND)))) {
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"writeUE");
return;
@@ -969,7 +969,7 @@
#endif
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"StWtExit");
return;
@@ -978,7 +978,7 @@
"state=%d\n",dev->name,p_ch->claw_state);
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(2,trace,"badIRQ");
return;
@@ -1001,7 +1001,7 @@
p_ch = (struct chbk *) data;
dev = (struct net_device *)p_ch->ndev;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter \n",dev->name,__func__);
#endif
#ifdef DEBUGMSG
printk(KERN_INFO "%s: variable p_ch =\n",dev->name);
@@ -1021,7 +1021,7 @@
CLAW_DBF_TEXT(4,trace,"TskletXt");
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return;
} /* end of claw_irq_bh */
@@ -1048,7 +1048,7 @@
if (!privptr)
return 0;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter \n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(4,trace,"release");
#ifdef DEBUGMSG
@@ -1090,7 +1090,7 @@
if(privptr->buffs_alloc != 1) {
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"none2fre");
return 0;
@@ -1171,7 +1171,7 @@
}
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"rlsexit");
return 0;
@@ -1192,7 +1192,7 @@
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
printk(KERN_INFO "claw: variable p_ch =\n");
dumpit((char *) p_ch, sizeof(struct chbk));
#endif
@@ -1200,20 +1200,20 @@
if (p_ch->claw_state == CLAW_STOP) {
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return;
}
#ifdef DEBUGMSG
printk( KERN_INFO "%s:%s state-%02x\n" ,
dev->name,
- __FUNCTION__,
+ __func__,
p_ch->claw_state);
#endif
claw_strt_out_IO( dev );
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"rtry_xit");
return;
@@ -1235,7 +1235,7 @@
int rc;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter \n",p_ch->ndev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter \n",p_ch->ndev->name,__func__);
printk(KERN_INFO "%s: variable p_ch =\n",p_ch->ndev->name);
dumpit((char *) p_ch, sizeof(struct chbk));
#endif
@@ -1262,7 +1262,7 @@
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return;
} /* end of claw_write_next */
@@ -1276,7 +1276,7 @@
claw_timer ( struct chbk * p_ch )
{
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Entry\n",p_ch->ndev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Entry\n",p_ch->ndev->name,__func__);
printk(KERN_INFO "%s: variable p_ch =\n",p_ch->ndev->name);
dumpit((char *) p_ch, sizeof(struct chbk));
#endif
@@ -1285,7 +1285,7 @@
wake_up(&p_ch->wait);
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- p_ch->ndev->name,__FUNCTION__,__LINE__);
+ p_ch->ndev->name,__func__,__LINE__);
#endif
return;
} /* end of claw_timer */
@@ -1312,7 +1312,7 @@
int order_of_mag=1; /* assume 2 pages */
int nump=2;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s Enter pages = %d \n",__FUNCTION__,num_of_pages);
+ printk(KERN_INFO "%s Enter pages = %d \n",__func__,num_of_pages);
#endif
CLAW_DBF_TEXT_(5,trace,"pages%d",num_of_pages);
if (num_of_pages == 1) {return 0; } /* magnitude of 0 = 1 page */
@@ -1327,7 +1327,7 @@
if (order_of_mag > 9) { order_of_mag = 9; } /* I know it's paranoid */
#ifdef FUNCTRACE
printk(KERN_INFO "%s Exit on line %d, order = %d\n",
- __FUNCTION__,__LINE__, order_of_mag);
+ __func__,__LINE__, order_of_mag);
#endif
CLAW_DBF_TEXT_(5,trace,"mag%d",order_of_mag);
return order_of_mag;
@@ -1349,7 +1349,7 @@
struct ccwbk* p_buf;
#endif
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter \n",dev->name,__func__);
#endif
#ifdef DEBUGMSG
printk(KERN_INFO "dev\n");
@@ -1369,7 +1369,7 @@
if ( p_first==NULL) {
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"addexit");
return 0;
@@ -1400,9 +1400,9 @@
if ( privptr-> p_read_active_first ==NULL ) {
#ifdef DEBUGMSG
printk(KERN_INFO "%s:%s p_read_active_first == NULL \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
printk(KERN_INFO "%s:%s Read active first/last changed \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
privptr-> p_read_active_first= p_first; /* set new first */
privptr-> p_read_active_last = p_last; /* set new last */
@@ -1411,7 +1411,7 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s:%s Read in progress \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
/* set up TIC ccw */
temp_ccw.cda= (__u32)__pa(&p_first->read);
@@ -1450,15 +1450,15 @@
privptr->p_read_active_last=p_last;
} /* end of if ( privptr-> p_read_active_first ==NULL) */
#ifdef IOTRACE
- printk(KERN_INFO "%s:%s dump p_last CCW BK \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s dump p_last CCW BK \n",dev->name,__func__);
dumpit((char *)p_last, sizeof(struct ccwbk));
- printk(KERN_INFO "%s:%s dump p_end CCW BK \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s dump p_end CCW BK \n",dev->name,__func__);
dumpit((char *)p_end, sizeof(struct endccw));
- printk(KERN_INFO "%s:%s dump p_first CCW BK \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s dump p_first CCW BK \n",dev->name,__func__);
dumpit((char *)p_first, sizeof(struct ccwbk));
printk(KERN_INFO "%s:%s Dump Active CCW chain \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
p_buf=privptr->p_read_active_first;
while (p_buf!=NULL) {
dumpit((char *)p_buf, sizeof(struct ccwbk));
@@ -1467,7 +1467,7 @@
#endif
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"addexit");
return 0;
@@ -1483,7 +1483,7 @@
{
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() > enter \n",
- cdev->dev.bus_id,__FUNCTION__);
+ cdev->dev.bus_id,__func__);
#endif
CLAW_DBF_TEXT(4,trace,"ccwret");
#ifdef DEBUGMSG
@@ -1516,7 +1516,7 @@
}
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() > exit on line %d\n",
- cdev->dev.bus_id,__FUNCTION__,__LINE__);
+ cdev->dev.bus_id,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"ccwret");
} /* end of ccw_check_return_code */
@@ -1531,7 +1531,7 @@
struct net_device *dev = p_ch->ndev;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s: %s() > enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s: %s() > enter\n",dev->name,__func__);
#endif
#ifdef DEBUGMSG
printk(KERN_INFO "%s: variable dev =\n",dev->name);
@@ -1578,7 +1578,7 @@
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
} /* end of ccw_check_unit_check */
@@ -1706,7 +1706,7 @@
int rc=0;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s > enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s > enter \n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,setup,"findlink");
#ifdef DEBUGMSG
@@ -1739,7 +1739,7 @@
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return 0;
} /* end of find_link */
@@ -1773,7 +1773,7 @@
struct ccwbk *p_buf;
#endif
#ifdef FUNCTRACE
- printk(KERN_INFO "%s: %s() > enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s: %s() > enter\n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(4,trace,"hw_tx");
#ifdef DEBUGMSG
@@ -1787,7 +1787,7 @@
p_ch=(struct chbk *)&privptr->channel[WRITE];
p_env =privptr->p_env;
#ifdef IOTRACE
- printk(KERN_INFO "%s: %s() dump sk_buff \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s: %s() dump sk_buff \n",dev->name,__func__);
dumpit((char *)skb ,sizeof(struct sk_buff));
#endif
claw_free_wrt_buf(dev); /* Clean up free chain if posible */
@@ -1877,7 +1877,7 @@
while (len_of_data > 0) {
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() length-of-data is %ld \n",
- dev->name ,__FUNCTION__,len_of_data);
+ dev->name ,__func__,len_of_data);
dumpit((char *)pDataAddress ,64);
#endif
p_this_ccw=privptr->p_write_free_chain; /* get a block */
@@ -1913,7 +1913,7 @@
p_last_ccw=p_this_ccw; /* save new last block */
#ifdef IOTRACE
printk(KERN_INFO "%s: %s() > CCW and Buffer %ld bytes long \n",
- dev->name,__FUNCTION__,bytesInThisBuffer);
+ dev->name,__func__,bytesInThisBuffer);
dumpit((char *)p_this_ccw, sizeof(struct ccwbk));
dumpit((char *)p_this_ccw->p_buffer, 64);
#endif
@@ -1998,7 +1998,7 @@
#ifdef IOTRACE
printk(KERN_INFO "%s: %s() > Dump Active CCW chain \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
p_buf=privptr->p_write_active_first;
while (p_buf!=NULL) {
dumpit((char *)p_buf, sizeof(struct ccwbk));
@@ -2018,7 +2018,7 @@
/* if write free count is zero , set NOBUFFER */
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() > free_count is %d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
(int) privptr->write_free_count );
#endif
if (privptr->write_free_count==0) {
@@ -2029,7 +2029,7 @@
Done:
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() > exit on line %d, rc = %d \n",
- dev->name,__FUNCTION__,__LINE__, rc);
+ dev->name,__func__,__LINE__, rc);
#endif
return(rc);
} /* end of claw_hw_tx */
@@ -2063,7 +2063,7 @@
addr_t real_TIC_address;
int i,j;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s: %s() enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s: %s() enter \n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(4,trace,"init_ccw");
#ifdef DEBUGMSG
@@ -2097,15 +2097,15 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() "
"ccw_blocks_required=%d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
ccw_blocks_required);
printk(KERN_INFO "%s: %s() "
"PAGE_SIZE=0x%x\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
(unsigned int)PAGE_SIZE);
printk(KERN_INFO "%s: %s() > "
"PAGE_MASK=0x%x\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
(unsigned int)PAGE_MASK);
#endif
/*
@@ -2117,10 +2117,10 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() > ccw_blocks_perpage=%d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
ccw_blocks_perpage);
printk(KERN_INFO "%s: %s() > ccw_pages_required=%d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
ccw_pages_required);
#endif
/*
@@ -2156,29 +2156,29 @@
#ifdef DEBUGMSG
if (privptr->p_env->read_size < PAGE_SIZE) {
printk(KERN_INFO "%s: %s() reads_perpage=%d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
claw_reads_perpage);
}
else {
printk(KERN_INFO "%s: %s() pages_perread=%d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
privptr->p_buff_pages_perread);
}
printk(KERN_INFO "%s: %s() read_pages=%d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
claw_read_pages);
if (privptr->p_env->write_size < PAGE_SIZE) {
printk(KERN_INFO "%s: %s() writes_perpage=%d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
claw_writes_perpage);
}
else {
printk(KERN_INFO "%s: %s() pages_perwrite=%d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
privptr->p_buff_pages_perwrite);
}
printk(KERN_INFO "%s: %s() write_pages=%d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
claw_write_pages);
#endif
@@ -2194,12 +2194,12 @@
printk(KERN_INFO "%s: %s() "
"__get_free_pages for CCWs failed : "
"pages is %d\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
ccw_pages_required );
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() > "
"exit on line %d, rc = ENOMEM\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
__LINE__);
#endif
return -ENOMEM;
@@ -2218,7 +2218,7 @@
/* Initialize ending CCW block */
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() begin initialize ending CCW blocks\n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
p_endccw=privptr->p_end_ccw;
@@ -2276,7 +2276,7 @@
#ifdef IOTRACE
printk(KERN_INFO "%s: %s() dump claw ending CCW BK \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
dumpit((char *)p_endccw, sizeof(struct endccw));
#endif
@@ -2287,7 +2287,7 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() Begin build a chain of CCW buffer \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
p_buff=privptr->p_buff_ccw;
@@ -2306,7 +2306,7 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() "
"End build a chain of CCW buffer \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
p_buf=p_free_chain;
while (p_buf!=NULL) {
dumpit((char *)p_buf, sizeof(struct ccwbk));
@@ -2321,7 +2321,7 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() "
"Begin initialize ClawSignalBlock \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
if (privptr->p_claw_signal_blk==NULL) {
privptr->p_claw_signal_blk=p_free_chain;
@@ -2334,7 +2334,7 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() > End initialize "
"ClawSignalBlock\n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
dumpit((char *)privptr->p_claw_signal_blk, sizeof(struct ccwbk));
#endif
@@ -2349,14 +2349,14 @@
if (privptr->p_buff_write==NULL) {
printk(KERN_INFO "%s: %s() __get_free_pages for write"
" bufs failed : get is for %d pages\n",
- dev->name,__FUNCTION__,claw_write_pages );
+ dev->name,__func__,claw_write_pages );
free_pages((unsigned long)privptr->p_buff_ccw,
(int)pages_to_order_of_mag(privptr->p_buff_ccw_num));
privptr->p_buff_ccw=NULL;
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() > exit on line %d,"
"rc = ENOMEM\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return -ENOMEM;
}
@@ -2369,7 +2369,7 @@
ccw_pages_required * PAGE_SIZE);
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() Begin build claw write free "
- "chain \n",dev->name,__FUNCTION__);
+ "chain \n",dev->name,__func__);
#endif
privptr->p_write_free_chain=NULL;
@@ -2409,14 +2409,14 @@
#ifdef IOTRACE
printk(KERN_INFO "%s:%s __get_free_pages "
"for writes buf: get for %d pages\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
privptr->p_buff_pages_perwrite);
#endif
if (p_buff==NULL) {
printk(KERN_INFO "%s:%s __get_free_pages "
"for writes buf failed : get is for %d pages\n",
dev->name,
- __FUNCTION__,
+ __func__,
privptr->p_buff_pages_perwrite );
free_pages((unsigned long)privptr->p_buff_ccw,
(int)pages_to_order_of_mag(
@@ -2433,7 +2433,7 @@
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s exit on line %d, rc = ENOMEM\n",
dev->name,
- __FUNCTION__,
+ __func__,
__LINE__);
#endif
return -ENOMEM;
@@ -2466,7 +2466,7 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s:%s End build claw write free chain \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
p_buf=privptr->p_write_free_chain;
while (p_buf!=NULL) {
dumpit((char *)p_buf, sizeof(struct ccwbk));
@@ -2485,7 +2485,7 @@
printk(KERN_INFO "%s: %s() "
"__get_free_pages for read buf failed : "
"get is for %d pages\n",
- dev->name,__FUNCTION__,claw_read_pages );
+ dev->name,__func__,claw_read_pages );
free_pages((unsigned long)privptr->p_buff_ccw,
(int)pages_to_order_of_mag(
privptr->p_buff_ccw_num));
@@ -2497,7 +2497,7 @@
privptr->p_buff_write=NULL;
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() > exit on line %d, rc ="
- " ENOMEM\n",dev->name,__FUNCTION__,__LINE__);
+ " ENOMEM\n",dev->name,__func__,__LINE__);
#endif
return -ENOMEM;
}
@@ -2509,7 +2509,7 @@
*/
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() Begin build claw read free chain \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
p_buff=privptr->p_buff_read;
for (i=0 ; i< privptr->p_env->read_buffers ; i++) {
@@ -2590,7 +2590,7 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() Begin build claw read free chain \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
for (i=0 ; i< privptr->p_env->read_buffers ; i++) {
p_buff = (void *)__get_free_pages(__GFP_DMA,
@@ -2598,7 +2598,7 @@
if (p_buff==NULL) {
printk(KERN_INFO "%s: %s() __get_free_pages for read "
"buf failed : get is for %d pages\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
privptr->p_buff_pages_perread );
free_pages((unsigned long)privptr->p_buff_ccw,
(int)pages_to_order_of_mag(privptr->p_buff_ccw_num));
@@ -2622,7 +2622,7 @@
privptr->p_buff_write=NULL;
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() exit on line %d, rc = ENOMEM\n",
- dev->name,__FUNCTION__,
+ dev->name,__func__,
__LINE__);
#endif
return -ENOMEM;
@@ -2695,7 +2695,7 @@
} /* pBuffread = NULL */
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() > End build claw read free chain \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
p_buf=p_first_CCWB;
while (p_buf!=NULL) {
dumpit((char *)p_buf, sizeof(struct ccwbk));
@@ -2707,7 +2707,7 @@
privptr->buffs_alloc = 1;
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return 0;
} /* end of init_ccw_bk */
@@ -2723,11 +2723,11 @@
{
struct claw_privbk *privptr;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s enter \n",__FUNCTION__);
+ printk(KERN_INFO "%s enter \n",__func__);
#endif
CLAW_DBF_TEXT(4,trace,"proberr");
#ifdef DEBUGMSG
- printk(KERN_INFO "%s variable cgdev =\n",__FUNCTION__);
+ printk(KERN_INFO "%s variable cgdev =\n",__func__);
dumpit((char *) cgdev, sizeof(struct ccwgroup_device));
#endif
privptr=(struct claw_privbk *)cgdev->dev.driver_data;
@@ -2741,7 +2741,7 @@
}
#ifdef FUNCTRACE
printk(KERN_INFO "%s > exit on line %d\n",
- __FUNCTION__,__LINE__);
+ __func__,__LINE__);
#endif
return;
@@ -2772,7 +2772,7 @@
struct chbk *p_ch = NULL;
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() > enter \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,setup,"clw_cntl");
#ifdef DEBUGMSG
@@ -2794,7 +2794,7 @@
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() > "
"exit on line %d, rc=0\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return 0;
}
@@ -3057,7 +3057,7 @@
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s() exit on line %d, rc = 0\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return 0;
@@ -3080,7 +3080,7 @@
struct sk_buff *skb;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s > enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s > enter \n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,setup,"sndcntl");
#ifdef DEBUGMSG
@@ -3143,10 +3143,10 @@
skb = dev_alloc_skb(sizeof(struct clawctl));
if (!skb) {
printk( "%s:%s low on mem, returning...\n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#ifdef DEBUG
printk(KERN_INFO "%s:%s Exit, rc = ENOMEM\n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
return -ENOMEM;
}
@@ -3162,7 +3162,7 @@
claw_hw_tx(skb, dev, 0);
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return 0;
@@ -3180,7 +3180,7 @@
struct clawctl *p_ctl;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter \n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,setup,"snd_conn");
#ifdef DEBUGMSG
@@ -3193,7 +3193,7 @@
if ( privptr->system_validate_comp==0x00 ) {
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d, rc = 1\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return rc;
}
@@ -3209,7 +3209,7 @@
HOST_APPL_NAME, privptr->p_env->api_type);
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d, rc = %d\n",
- dev->name,__FUNCTION__,__LINE__, rc);
+ dev->name,__func__,__LINE__, rc);
#endif
return rc;
@@ -3228,7 +3228,7 @@
struct conncmd * p_connect;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,setup,"snd_dsc");
#ifdef DEBUGMSG
@@ -3244,7 +3244,7 @@
p_connect->host_name, p_connect->WS_name);
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d, rc = %d\n",
- dev->name,__FUNCTION__, __LINE__, rc);
+ dev->name,__func__, __LINE__, rc);
#endif
return rc;
} /* end of claw_snd_disc */
@@ -3265,7 +3265,7 @@
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Enter\n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,setup,"chkresp");
#ifdef DEBUGMSG
@@ -3285,7 +3285,7 @@
p_env->adapter_name );
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d, rc = %d\n",
- dev->name,__FUNCTION__,__LINE__, rc);
+ dev->name,__func__,__LINE__, rc);
#endif
return rc;
} /* end of claw_snd_sys_validate_rsp */
@@ -3301,7 +3301,7 @@
int rc;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,setup,"conn_req");
#ifdef DEBUGMSG
@@ -3311,7 +3311,7 @@
rc=claw_snd_conn_req(dev, 1);
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d, rc = %d\n",
- dev->name,__FUNCTION__,__LINE__, rc);
+ dev->name,__func__,__LINE__, rc);
#endif
return rc;
} /* end of claw_strt_conn_req */
@@ -3327,13 +3327,13 @@
{
struct claw_privbk *privptr;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(4,trace,"stats");
privptr = dev->priv;
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return &privptr->stats;
} /* end of claw_stats */
@@ -3366,7 +3366,7 @@
int p=0;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s enter \n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(4,trace,"unpkread");
p_first_ccw=NULL;
@@ -3408,7 +3408,7 @@
if ((p_this_ccw->header.opcode & MORE_to_COME_FLAG)!=0) {
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s > More_to_come is ON\n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
mtc_this_frm=1;
if (p_this_ccw->header.length!=
@@ -3435,7 +3435,7 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s:%s goto next "
"frame from MoretoComeSkip \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
goto NextFrame;
}
@@ -3445,7 +3445,7 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s:%s goto next "
"frame from claw_process_control \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
CLAW_DBF_TEXT(4,trace,"UnpkCntl");
goto NextFrame;
@@ -3468,7 +3468,7 @@
if (privptr->mtc_logical_link<0) {
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s mtc_logical_link < 0 \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
/*
@@ -3487,7 +3487,7 @@
printk(KERN_INFO "%s: %s > goto next "
"frame from MoretoComeSkip \n",
dev->name,
- __FUNCTION__);
+ __func__);
printk(KERN_INFO " bytes_to_mov %d > (MAX_ENVELOPE_"
"SIZE-privptr->mtc_offset %d)\n",
bytes_to_mov,(MAX_ENVELOPE_SIZE- privptr->mtc_offset));
@@ -3505,13 +3505,13 @@
}
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() received data \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
if (p_env->packing == DO_PACKED)
dumpit((char *)p_packd+sizeof(struct clawph),32);
else
dumpit((char *)p_this_ccw->p_buffer, 32);
printk(KERN_INFO "%s: %s() bytelength %d \n",
- dev->name,__FUNCTION__,bytes_to_mov);
+ dev->name,__func__,bytes_to_mov);
#endif
if (mtc_this_frm==0) {
len_of_data=privptr->mtc_offset+bytes_to_mov;
@@ -3530,13 +3530,13 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s: %s() netif_"
"rx(skb) completed \n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
}
else {
privptr->stats.rx_dropped++;
printk(KERN_WARNING "%s: %s() low on memory\n",
- dev->name,__FUNCTION__);
+ dev->name,__func__);
}
privptr->mtc_offset=0;
privptr->mtc_logical_link=-1;
@@ -3575,10 +3575,10 @@
#ifdef IOTRACE
printk(KERN_INFO "%s:%s processed frame is %d \n",
- dev->name,__FUNCTION__,i);
+ dev->name,__func__,i);
printk(KERN_INFO "%s:%s F:%lx L:%lx\n",
dev->name,
- __FUNCTION__,
+ __func__,
(unsigned long)p_first_ccw,
(unsigned long)p_last_ccw);
#endif
@@ -3588,7 +3588,7 @@
claw_strt_read(dev, LOCK_YES);
#ifdef FUNCTRACE
printk(KERN_INFO "%s: %s exit on line %d\n",
- dev->name, __FUNCTION__, __LINE__);
+ dev->name, __func__, __LINE__);
#endif
return;
} /* end of unpack_read */
@@ -3610,7 +3610,7 @@
p_ch=&privptr->channel[READ];
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter \n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter \n",dev->name,__func__);
printk(KERN_INFO "%s: variable lock = %d, dev =\n",dev->name, lock);
dumpit((char *) dev, sizeof(struct net_device));
#endif
@@ -3626,7 +3626,7 @@
}
#ifdef DEBUGMSG
printk(KERN_INFO "%s:%s state-%02x\n" ,
- dev->name,__FUNCTION__, p_ch->claw_state);
+ dev->name,__func__, p_ch->claw_state);
#endif
if (lock==LOCK_YES) {
spin_lock_irqsave(get_ccwdev_lock(p_ch->cdev), saveflags);
@@ -3634,7 +3634,7 @@
if (test_and_set_bit(0, (void *)&p_ch->IO_active) == 0) {
#ifdef DEBUGMSG
printk(KERN_INFO "%s: HOT READ started in %s\n" ,
- dev->name,__FUNCTION__);
+ dev->name,__func__);
p_clawh=(struct clawh *)privptr->p_claw_signal_blk;
dumpit((char *)&p_clawh->flag , 1);
#endif
@@ -3650,7 +3650,7 @@
else {
#ifdef DEBUGMSG
printk(KERN_INFO "%s: No READ started by %s() In progress\n" ,
- dev->name,__FUNCTION__);
+ dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,trace,"ReadAct");
}
@@ -3660,7 +3660,7 @@
}
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
CLAW_DBF_TEXT(4,trace,"StRdExit");
return;
@@ -3681,7 +3681,7 @@
struct ccwbk *p_first_ccw;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
#endif
if (!dev) {
return;
@@ -3691,7 +3691,7 @@
#ifdef DEBUGMSG
printk(KERN_INFO "%s:%s state-%02x\n" ,
- dev->name,__FUNCTION__,p_ch->claw_state);
+ dev->name,__func__,p_ch->claw_state);
#endif
CLAW_DBF_TEXT(4,trace,"strt_io");
p_first_ccw=privptr->p_write_active_first;
@@ -3701,14 +3701,14 @@
if (p_first_ccw == NULL) {
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return;
}
if (test_and_set_bit(0, (void *)&p_ch->IO_active) == 0) {
parm = (unsigned long) p_ch;
#ifdef DEBUGMSG
- printk(KERN_INFO "%s:%s do_io \n" ,dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s do_io \n" ,dev->name,__func__);
dumpit((char *)p_first_ccw, sizeof(struct ccwbk));
#endif
CLAW_DBF_TEXT(2,trace,"StWrtIO");
@@ -3721,7 +3721,7 @@
dev->trans_start = jiffies;
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- dev->name,__FUNCTION__,__LINE__);
+ dev->name,__func__,__LINE__);
#endif
return;
@@ -3745,7 +3745,7 @@
struct ccwbk*p_buf;
#endif
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
printk(KERN_INFO "%s: free count = %d variable dev =\n",
dev->name,privptr->write_free_count);
#endif
@@ -3798,7 +3798,7 @@
privptr->p_write_active_last=NULL;
#ifdef DEBUGMSG
printk(KERN_INFO "%s:%s p_write_"
- "active_first==NULL\n",dev->name,__FUNCTION__);
+ "active_first==NULL\n",dev->name,__func__);
#endif
}
#ifdef IOTRACE
@@ -3819,7 +3819,7 @@
CLAW_DBF_TEXT_(4,trace,"FWC=%d",privptr->write_free_count);
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d free_count =%d\n",
- dev->name,__FUNCTION__, __LINE__,privptr->write_free_count);
+ dev->name,__func__, __LINE__,privptr->write_free_count);
#endif
return;
}
@@ -3833,7 +3833,7 @@
{
struct claw_privbk *privptr;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,setup,"free_dev");
@@ -3854,7 +3854,7 @@
#endif
CLAW_DBF_TEXT(2,setup,"feee_ok");
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Exit\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Exit\n",dev->name,__func__);
#endif
}
@@ -3867,13 +3867,13 @@
claw_init_netdevice(struct net_device * dev)
{
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter\n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,setup,"init_dev");
CLAW_DBF_TEXT_(2,setup,"%s",dev->name);
if (!dev) {
printk(KERN_WARNING "claw:%s BAD Device exit line %d\n",
- __FUNCTION__,__LINE__);
+ __func__,__LINE__);
CLAW_DBF_TEXT(2,setup,"baddev");
return;
}
@@ -3889,7 +3889,7 @@
dev->tx_queue_len = 1300;
dev->flags = IFF_POINTOPOINT | IFF_NOARP;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Exit\n",dev->name,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Exit\n",dev->name,__func__);
#endif
CLAW_DBF_TEXT(2,setup,"initok");
return;
@@ -3909,7 +3909,7 @@
struct ccw_dev_id dev_id;
#ifdef FUNCTRACE
- printk(KERN_INFO "%s:%s Enter\n",cdev->dev.bus_id,__FUNCTION__);
+ printk(KERN_INFO "%s:%s Enter\n",cdev->dev.bus_id,__func__);
#endif
CLAW_DBF_TEXT_(2,setup,"%s",cdev->dev.bus_id);
privptr->channel[i].flag = i+1; /* Read is 1 Write is 2 */
@@ -3920,16 +3920,16 @@
p_ch->devno = dev_id.devno;
if ((p_ch->irb = kzalloc(sizeof (struct irb),GFP_KERNEL)) == NULL) {
printk(KERN_WARNING "%s Out of memory in %s for irb\n",
- p_ch->id,__FUNCTION__);
+ p_ch->id,__func__);
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- p_ch->id,__FUNCTION__,__LINE__);
+ p_ch->id,__func__,__LINE__);
#endif
return -ENOMEM;
}
#ifdef FUNCTRACE
printk(KERN_INFO "%s:%s Exit on line %d\n",
- cdev->dev.bus_id,__FUNCTION__,__LINE__);
+ cdev->dev.bus_id,__func__,__LINE__);
#endif
return 0;
}
@@ -3952,7 +3952,7 @@
int ret;
struct ccw_dev_id dev_id;
- pr_debug("%s() called\n", __FUNCTION__);
+ pr_debug("%s() called\n", __func__);
printk(KERN_INFO "claw: add for %s\n",cgdev->cdev[READ]->dev.bus_id);
CLAW_DBF_TEXT(2,setup,"new_dev");
privptr = cgdev->dev.driver_data;
@@ -3990,7 +3990,7 @@
}
dev = alloc_netdev(0,"claw%d",claw_init_netdevice);
if (!dev) {
- printk(KERN_WARNING "%s:alloc_netdev failed\n",__FUNCTION__);
+ printk(KERN_WARNING "%s:alloc_netdev failed\n",__func__);
goto out;
}
dev->priv = privptr;
@@ -4065,7 +4065,7 @@
struct net_device *ndev;
int ret;
- pr_debug("%s() called\n", __FUNCTION__);
+ pr_debug("%s() called\n", __func__);
CLAW_DBF_TEXT_(2,setup,"%s",cgdev->dev.bus_id);
priv = cgdev->dev.driver_data;
if (!priv)
@@ -4095,15 +4095,15 @@
{
struct claw_privbk *priv;
- pr_debug("%s() called\n", __FUNCTION__);
+ pr_debug("%s() called\n", __func__);
CLAW_DBF_TEXT_(2,setup,"%s",cgdev->dev.bus_id);
priv = cgdev->dev.driver_data;
if (!priv) {
- printk(KERN_WARNING "claw: %s() no Priv exiting\n",__FUNCTION__);
+ printk(KERN_WARNING "claw: %s() no Priv exiting\n",__func__);
return;
}
printk(KERN_INFO "claw: %s() called %s will be removed.\n",
- __FUNCTION__,cgdev->cdev[0]->dev.bus_id);
+ __func__,cgdev->cdev[0]->dev.bus_id);
if (cgdev->state == CCWGROUP_ONLINE)
claw_shutdown_device(cgdev);
claw_remove_files(&cgdev->dev);
@@ -4346,7 +4346,7 @@
static int
claw_add_files(struct device *dev)
{
- pr_debug("%s() called\n", __FUNCTION__);
+ pr_debug("%s() called\n", __func__);
CLAW_DBF_TEXT(2,setup,"add_file");
return sysfs_create_group(&dev->kobj, &claw_attr_group);
}
@@ -4354,7 +4354,7 @@
static void
claw_remove_files(struct device *dev)
{
- pr_debug("%s() called\n", __FUNCTION__);
+ pr_debug("%s() called\n", __func__);
CLAW_DBF_TEXT(2,setup,"rem_file");
sysfs_remove_group(&dev->kobj, &claw_attr_group);
}
@@ -4385,12 +4385,12 @@
printk(KERN_INFO "claw: starting driver\n");
#ifdef FUNCTRACE
- printk(KERN_INFO "claw: %s() enter \n",__FUNCTION__);
+ printk(KERN_INFO "claw: %s() enter \n",__func__);
#endif
ret = claw_register_debug_facility();
if (ret) {
printk(KERN_WARNING "claw: %s() debug_register failed %d\n",
- __FUNCTION__,ret);
+ __func__,ret);
return ret;
}
CLAW_DBF_TEXT(2,setup,"init_mod");
@@ -4398,10 +4398,10 @@
if (ret) {
claw_unregister_debug_facility();
printk(KERN_WARNING "claw; %s() cu3088 register failed %d\n",
- __FUNCTION__,ret);
+ __func__,ret);
}
#ifdef FUNCTRACE
- printk(KERN_INFO "claw: %s() exit \n",__FUNCTION__);
+ printk(KERN_INFO "claw: %s() exit \n",__func__);
#endif
return ret;
}
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 874a199..8f876f6 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -670,7 +670,7 @@
struct netiucv_priv *privptr = netdev_priv(conn->netdev);
int rc;
- IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 4, __func__);
if (!conn->netdev) {
iucv_message_reject(conn->path, msg);
@@ -718,7 +718,7 @@
struct ll_header header;
int rc;
- IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 4, __func__);
if (conn && conn->netdev)
privptr = netdev_priv(conn->netdev);
@@ -799,7 +799,7 @@
struct netiucv_priv *privptr = netdev_priv(netdev);
int rc;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
conn->path = path;
path->msglim = NETIUCV_QUEUELEN_DEFAULT;
@@ -821,7 +821,7 @@
struct iucv_event *ev = arg;
struct iucv_path *path = ev->data;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
iucv_path_sever(path, NULL);
}
@@ -831,7 +831,7 @@
struct net_device *netdev = conn->netdev;
struct netiucv_priv *privptr = netdev_priv(netdev);
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
fsm_deltimer(&conn->timer);
fsm_newstate(fi, CONN_STATE_IDLE);
netdev->tx_queue_len = conn->path->msglim;
@@ -842,7 +842,7 @@
{
struct iucv_connection *conn = arg;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
fsm_deltimer(&conn->timer);
iucv_path_sever(conn->path, NULL);
fsm_newstate(fi, CONN_STATE_STARTWAIT);
@@ -854,7 +854,7 @@
struct net_device *netdev = conn->netdev;
struct netiucv_priv *privptr = netdev_priv(netdev);
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
fsm_deltimer(&conn->timer);
iucv_path_sever(conn->path, NULL);
@@ -870,7 +870,7 @@
struct iucv_connection *conn = arg;
int rc;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
fsm_newstate(fi, CONN_STATE_STARTWAIT);
PRINT_DEBUG("%s('%s'): connecting ...\n",
@@ -948,7 +948,7 @@
struct net_device *netdev = conn->netdev;
struct netiucv_priv *privptr = netdev_priv(netdev);
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
fsm_deltimer(&conn->timer);
fsm_newstate(fi, CONN_STATE_STOPPED);
@@ -1024,7 +1024,7 @@
struct net_device *dev = arg;
struct netiucv_priv *privptr = netdev_priv(dev);
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
fsm_newstate(fi, DEV_STATE_STARTWAIT);
fsm_event(privptr->conn->fsm, CONN_EVENT_START, privptr->conn);
@@ -1044,7 +1044,7 @@
struct netiucv_priv *privptr = netdev_priv(dev);
struct iucv_event ev;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
ev.conn = privptr->conn;
@@ -1066,7 +1066,7 @@
struct net_device *dev = arg;
struct netiucv_priv *privptr = netdev_priv(dev);
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
switch (fsm_getstate(fi)) {
case DEV_STATE_STARTWAIT:
@@ -1097,7 +1097,7 @@
static void
dev_action_conndown(fsm_instance *fi, int event, void *arg)
{
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
switch (fsm_getstate(fi)) {
case DEV_STATE_RUNNING:
@@ -1288,7 +1288,7 @@
struct netiucv_priv *privptr = netdev_priv(dev);
int rc;
- IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 4, __func__);
/**
* Some sanity checks ...
*/
@@ -1344,7 +1344,7 @@
{
struct netiucv_priv *priv = netdev_priv(dev);
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return &priv->stats;
}
@@ -1360,7 +1360,7 @@
*/
static int netiucv_change_mtu(struct net_device * dev, int new_mtu)
{
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
if (new_mtu < 576 || new_mtu > NETIUCV_MTU_MAX) {
IUCV_DBF_TEXT(setup, 2, "given MTU out of valid range\n");
return -EINVAL;
@@ -1378,7 +1378,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%s\n", netiucv_printname(priv->conn->userid));
}
@@ -1393,7 +1393,7 @@
int i;
struct iucv_connection *cp;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
if (count > 9) {
PRINT_WARN("netiucv: username too long (%d)!\n", (int) count);
IUCV_DBF_TEXT_(setup, 2,
@@ -1449,7 +1449,7 @@
char *buf)
{ struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%d\n", priv->conn->max_buffsize);
}
@@ -1461,7 +1461,7 @@
char *e;
int bs1;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
if (count >= 39)
return -EINVAL;
@@ -1513,7 +1513,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%s\n", fsm_getstate_str(priv->fsm));
}
@@ -1524,7 +1524,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%s\n", fsm_getstate_str(priv->conn->fsm));
}
@@ -1535,7 +1535,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.maxmulti);
}
@@ -1545,7 +1545,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.maxmulti = 0;
return count;
}
@@ -1557,7 +1557,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.maxcqueue);
}
@@ -1566,7 +1566,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.maxcqueue = 0;
return count;
}
@@ -1578,7 +1578,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.doios_single);
}
@@ -1587,7 +1587,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.doios_single = 0;
return count;
}
@@ -1599,7 +1599,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.doios_multi);
}
@@ -1608,7 +1608,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
priv->conn->prof.doios_multi = 0;
return count;
}
@@ -1620,7 +1620,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.txlen);
}
@@ -1629,7 +1629,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.txlen = 0;
return count;
}
@@ -1641,7 +1641,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.tx_time);
}
@@ -1650,7 +1650,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.tx_time = 0;
return count;
}
@@ -1662,7 +1662,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.tx_pending);
}
@@ -1671,7 +1671,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.tx_pending = 0;
return count;
}
@@ -1683,7 +1683,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 5, __func__);
return sprintf(buf, "%ld\n", priv->conn->prof.tx_max_pending);
}
@@ -1692,7 +1692,7 @@
{
struct netiucv_priv *priv = dev->driver_data;
- IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 4, __func__);
priv->conn->prof.tx_max_pending = 0;
return count;
}
@@ -1732,7 +1732,7 @@
{
int ret;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
ret = sysfs_create_group(&dev->kobj, &netiucv_attr_group);
if (ret)
return ret;
@@ -1744,7 +1744,7 @@
static void netiucv_remove_files(struct device *dev)
{
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
sysfs_remove_group(&dev->kobj, &netiucv_stat_attr_group);
sysfs_remove_group(&dev->kobj, &netiucv_attr_group);
}
@@ -1756,7 +1756,7 @@
int ret;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
if (dev) {
snprintf(dev->bus_id, BUS_ID_SIZE, "net%s", ndev->name);
@@ -1792,7 +1792,7 @@
static void netiucv_unregister_device(struct device *dev)
{
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
netiucv_remove_files(dev);
device_unregister(dev);
}
@@ -1857,7 +1857,7 @@
*/
static void netiucv_remove_connection(struct iucv_connection *conn)
{
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
write_lock_bh(&iucv_connection_rwlock);
list_del_init(&conn->list);
write_unlock_bh(&iucv_connection_rwlock);
@@ -1881,7 +1881,7 @@
{
struct netiucv_priv *privptr = netdev_priv(dev);
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
if (!dev)
return;
@@ -1963,7 +1963,7 @@
struct netiucv_priv *priv;
struct iucv_connection *cp;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
if (count>9) {
PRINT_WARN("netiucv: username too long (%d)!\n", (int)count);
IUCV_DBF_TEXT(setup, 2, "conn_write: too long\n");
@@ -2048,7 +2048,7 @@
const char *p;
int i;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
if (count >= IFNAMSIZ)
count = IFNAMSIZ - 1;;
@@ -2116,7 +2116,7 @@
struct netiucv_priv *priv;
struct device *dev;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
+ IUCV_DBF_TEXT(trace, 3, __func__);
while (!list_empty(&iucv_connection_list)) {
cp = list_entry(iucv_connection_list.next,
struct iucv_connection, list);
@@ -2146,8 +2146,7 @@
rc = iucv_register(&netiucv_handler, 1);
if (rc)
goto out_dbf;
- IUCV_DBF_TEXT(trace, 3, __FUNCTION__);
- netiucv_driver.groups = netiucv_drv_attr_groups;
+ IUCV_DBF_TEXT(trace, 3, __func__);
rc = driver_register(&netiucv_driver);
if (rc) {
PRINT_ERR("NETIUCV: failed to register driver.\n");
diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c
index 644a06e..4d4b542 100644
--- a/drivers/s390/s390mach.c
+++ b/drivers/s390/s390mach.c
@@ -59,15 +59,15 @@
printk(KERN_WARNING"%s: Code does not support more "
"than two chained crws; please report to "
- "linux390@de.ibm.com!\n", __FUNCTION__);
+ "linux390@de.ibm.com!\n", __func__);
ccode = stcrw(&tmp_crw);
printk(KERN_WARNING"%s: crw reports slct=%d, oflw=%d, "
"chn=%d, rsc=%X, anc=%d, erc=%X, rsid=%X\n",
- __FUNCTION__, tmp_crw.slct, tmp_crw.oflw,
+ __func__, tmp_crw.slct, tmp_crw.oflw,
tmp_crw.chn, tmp_crw.rsc, tmp_crw.anc,
tmp_crw.erc, tmp_crw.rsid);
printk(KERN_WARNING"%s: This was crw number %x in the "
- "chain\n", __FUNCTION__, chain);
+ "chain\n", __func__, chain);
if (ccode != 0)
break;
chain = tmp_crw.chn ? chain + 1 : 0;
@@ -83,7 +83,7 @@
crw[chain].rsid);
/* Check for overflows. */
if (crw[chain].oflw) {
- pr_debug("%s: crw overflow detected!\n", __FUNCTION__);
+ pr_debug("%s: crw overflow detected!\n", __func__);
css_schedule_eval_all();
chain = 0;
continue;
diff --git a/drivers/s390/s390mach.h b/drivers/s390/s390mach.h
index d3ca428..ca681f9 100644
--- a/drivers/s390/s390mach.h
+++ b/drivers/s390/s390mach.h
@@ -105,4 +105,8 @@
#define ED_ETR_SYNC 12 /* External damage ETR sync check */
#define ED_ETR_SWITCH 13 /* External damage ETR switch to local */
+struct pt_regs;
+
+void s390_handle_mcck(void);
+void s390_do_machine_check(struct pt_regs *regs);
#endif /* __s390mach */
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 9e9f6c1..45a7cd9 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -539,7 +539,7 @@
/* logging routine for zfcp */
#define _ZFCP_LOG(fmt, args...) \
- printk(KERN_ERR ZFCP_NAME": %s(%d): " fmt, __FUNCTION__, \
+ printk(KERN_ERR ZFCP_NAME": %s(%d): " fmt, __func__, \
__LINE__ , ##args)
#define ZFCP_LOG(level, fmt, args...) \
diff --git a/drivers/s390/sysinfo.c b/drivers/s390/sysinfo.c
index 291ff62..c3e4ab0 100644
--- a/drivers/s390/sysinfo.c
+++ b/drivers/s390/sysinfo.c
@@ -11,111 +11,13 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/ebcdic.h>
+#include <asm/sysinfo.h>
/* Sigh, math-emu. Don't ask. */
#include <asm/sfp-util.h>
#include <math-emu/soft-fp.h>
#include <math-emu/single.h>
-struct sysinfo_1_1_1 {
- char reserved_0[32];
- char manufacturer[16];
- char type[4];
- char reserved_1[12];
- char model_capacity[16];
- char sequence[16];
- char plant[4];
- char model[16];
-};
-
-struct sysinfo_1_2_1 {
- char reserved_0[80];
- char sequence[16];
- char plant[4];
- char reserved_1[2];
- unsigned short cpu_address;
-};
-
-struct sysinfo_1_2_2 {
- char format;
- char reserved_0[1];
- unsigned short acc_offset;
- char reserved_1[24];
- unsigned int secondary_capability;
- unsigned int capability;
- unsigned short cpus_total;
- unsigned short cpus_configured;
- unsigned short cpus_standby;
- unsigned short cpus_reserved;
- unsigned short adjustment[0];
-};
-
-struct sysinfo_1_2_2_extension {
- unsigned int alt_capability;
- unsigned short alt_adjustment[0];
-};
-
-struct sysinfo_2_2_1 {
- char reserved_0[80];
- char sequence[16];
- char plant[4];
- unsigned short cpu_id;
- unsigned short cpu_address;
-};
-
-struct sysinfo_2_2_2 {
- char reserved_0[32];
- unsigned short lpar_number;
- char reserved_1;
- unsigned char characteristics;
- unsigned short cpus_total;
- unsigned short cpus_configured;
- unsigned short cpus_standby;
- unsigned short cpus_reserved;
- char name[8];
- unsigned int caf;
- char reserved_2[16];
- unsigned short cpus_dedicated;
- unsigned short cpus_shared;
-};
-
-#define LPAR_CHAR_DEDICATED (1 << 7)
-#define LPAR_CHAR_SHARED (1 << 6)
-#define LPAR_CHAR_LIMITED (1 << 5)
-
-struct sysinfo_3_2_2 {
- char reserved_0[31];
- unsigned char count;
- struct {
- char reserved_0[4];
- unsigned short cpus_total;
- unsigned short cpus_configured;
- unsigned short cpus_standby;
- unsigned short cpus_reserved;
- char name[8];
- unsigned int caf;
- char cpi[16];
- char reserved_1[24];
-
- } vm[8];
-};
-
-static inline int stsi(void *sysinfo, int fc, int sel1, int sel2)
-{
- register int r0 asm("0") = (fc << 28) | sel1;
- register int r1 asm("1") = sel2;
-
- asm volatile(
- " stsi 0(%2)\n"
- "0: jz 2f\n"
- "1: lhi %0,%3\n"
- "2:\n"
- EX_TABLE(0b,1b)
- : "+d" (r0) : "d" (r1), "a" (sysinfo), "K" (-ENOSYS)
- : "cc", "memory" );
- return r0;
-}
-
static inline int stsi_0(void)
{
int rc = stsi (NULL, 0, 0, 0);
@@ -133,6 +35,8 @@
EBCASC(info->sequence, sizeof(info->sequence));
EBCASC(info->plant, sizeof(info->plant));
EBCASC(info->model_capacity, sizeof(info->model_capacity));
+ EBCASC(info->model_perm_cap, sizeof(info->model_perm_cap));
+ EBCASC(info->model_temp_cap, sizeof(info->model_temp_cap));
len += sprintf(page + len, "Manufacturer: %-16.16s\n",
info->manufacturer);
len += sprintf(page + len, "Type: %-4.4s\n",
@@ -155,8 +59,18 @@
info->sequence);
len += sprintf(page + len, "Plant: %-4.4s\n",
info->plant);
- len += sprintf(page + len, "Model Capacity: %-16.16s\n",
- info->model_capacity);
+ len += sprintf(page + len, "Model Capacity: %-16.16s %08u\n",
+ info->model_capacity, *(u32 *) info->model_cap_rating);
+ if (info->model_perm_cap[0] != '\0')
+ len += sprintf(page + len,
+ "Model Perm. Capacity: %-16.16s %08u\n",
+ info->model_perm_cap,
+ *(u32 *) info->model_perm_cap_rating);
+ if (info->model_temp_cap[0] != '\0')
+ len += sprintf(page + len,
+ "Model Temp. Capacity: %-16.16s %08u\n",
+ info->model_temp_cap,
+ *(u32 *) info->model_temp_cap_rating);
return len;
}
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 880c78b..ed7e0a1 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -218,18 +218,24 @@
get_device(&shost->shost_gendev);
- if (shost->transportt->host_size &&
- (shost->shost_data = kzalloc(shost->transportt->host_size,
- GFP_KERNEL)) == NULL)
- goto out_del_classdev;
+ if (shost->transportt->host_size) {
+ shost->shost_data = kzalloc(shost->transportt->host_size,
+ GFP_KERNEL);
+ if (shost->shost_data == NULL) {
+ error = -ENOMEM;
+ goto out_del_classdev;
+ }
+ }
if (shost->transportt->create_work_queue) {
snprintf(shost->work_q_name, KOBJ_NAME_LEN, "scsi_wq_%d",
shost->host_no);
shost->work_q = create_singlethread_workqueue(
shost->work_q_name);
- if (!shost->work_q)
+ if (!shost->work_q) {
+ error = -EINVAL;
goto out_free_shost_data;
+ }
}
error = scsi_sysfs_add_host(shost);
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 68e5c63..93c3fc2 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -60,31 +60,6 @@
#define IDESCSI_DEBUG_LOG 0
-typedef struct idescsi_pc_s {
- u8 c[12]; /* Actual packet bytes */
- int request_transfer; /* Bytes to transfer */
- int actually_transferred; /* Bytes actually transferred */
- int buffer_size; /* Size of our data buffer */
- struct request *rq; /* The corresponding request */
- u8 *buffer; /* Data buffer */
- u8 *current_position; /* Pointer into the above buffer */
- struct scatterlist *sg; /* Scatter gather table */
- unsigned int sg_cnt; /* Number of entries in sg */
- int b_count; /* Bytes transferred from current entry */
- struct scsi_cmnd *scsi_cmd; /* SCSI command */
- void (*done)(struct scsi_cmnd *); /* Scsi completion routine */
- unsigned long flags; /* Status/Action flags */
- unsigned long timeout; /* Command timeout */
-} idescsi_pc_t;
-
-/*
- * Packet command status bits.
- */
-#define PC_DMA_IN_PROGRESS 0 /* 1 while DMA in progress */
-#define PC_WRITING 1 /* Data direction */
-#define PC_TIMEDOUT 3 /* command timed out */
-#define PC_DMA_OK 4 /* Use DMA */
-
/*
* SCSI command transformation layer
*/
@@ -101,14 +76,15 @@
struct gendisk *disk;
struct Scsi_Host *host;
- idescsi_pc_t *pc; /* Current packet command */
+ struct ide_atapi_pc *pc; /* Current packet command */
unsigned long flags; /* Status/Action flags */
unsigned long transform; /* SCSI cmd translation layer */
unsigned long log; /* log flags */
} idescsi_scsi_t;
static DEFINE_MUTEX(idescsi_ref_mutex);
-static int idescsi_nocd; /* Set by module param to skip cd */
+/* Set by module param to skip cd */
+static int idescsi_nocd;
#define ide_scsi_g(disk) \
container_of((disk)->private_data, struct ide_scsi_obj, driver)
@@ -152,22 +128,11 @@
*/
#define IDESCSI_PC_RQ 90
-static void idescsi_discard_data (ide_drive_t *drive, unsigned int bcount)
-{
- while (bcount--)
- (void) HWIF(drive)->INB(IDE_DATA_REG);
-}
-
-static void idescsi_output_zeros (ide_drive_t *drive, unsigned int bcount)
-{
- while (bcount--)
- HWIF(drive)->OUTB(0, IDE_DATA_REG);
-}
-
/*
* PIO data transfer routines using the scatter gather table.
*/
-static void idescsi_input_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigned int bcount)
+static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ unsigned int bcount)
{
int count;
char *buf;
@@ -200,11 +165,12 @@
if (bcount) {
printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n");
- idescsi_discard_data (drive, bcount);
+ ide_atapi_discard_data(drive, bcount);
}
}
-static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigned int bcount)
+static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ unsigned int bcount)
{
int count;
char *buf;
@@ -237,7 +203,7 @@
if (bcount) {
printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n");
- idescsi_output_zeros (drive, bcount);
+ ide_atapi_write_zeros(drive, bcount);
}
}
@@ -246,15 +212,16 @@
print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
}
-static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_command)
+static int idescsi_check_condition(ide_drive_t *drive,
+ struct request *failed_cmd)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- idescsi_pc_t *pc;
+ struct ide_atapi_pc *pc;
struct request *rq;
u8 *buf;
/* stuff a sense request in front of our current request */
- pc = kzalloc(sizeof(idescsi_pc_t), GFP_ATOMIC);
+ pc = kzalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC);
rq = kmalloc(sizeof(struct request), GFP_ATOMIC);
buf = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_ATOMIC);
if (!pc || !rq || !buf) {
@@ -266,14 +233,14 @@
ide_init_drive_cmd(rq);
rq->special = (char *) pc;
pc->rq = rq;
- pc->buffer = buf;
+ pc->buf = buf;
pc->c[0] = REQUEST_SENSE;
- pc->c[4] = pc->request_transfer = pc->buffer_size = SCSI_SENSE_BUFFERSIZE;
+ pc->c[4] = pc->req_xfer = pc->buf_size = SCSI_SENSE_BUFFERSIZE;
rq->cmd_type = REQ_TYPE_SENSE;
pc->timeout = jiffies + WAIT_READY;
/* NOTE! Save the failed packet command in "rq->buffer" */
- rq->buffer = (void *) failed_command->special;
- pc->scsi_cmd = ((idescsi_pc_t *) failed_command->special)->scsi_cmd;
+ rq->buffer = (void *) failed_cmd->special;
+ pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: queue cmd = ", drive->name);
ide_scsi_hex_dump(pc->c, 6);
@@ -287,9 +254,12 @@
static ide_startstop_t
idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
+ ide_hwif_t *hwif = drive->hwif;
+
if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- HWIF(drive)->OUTB(WIN_IDLEIMMEDIATE,IDE_COMMAND_REG);
+ hwif->OUTB(WIN_IDLEIMMEDIATE,
+ hwif->io_ports[IDE_COMMAND_OFFSET]);
rq->errors++;
@@ -303,7 +273,7 @@
{
#if IDESCSI_DEBUG_LOG
printk(KERN_WARNING "idescsi_atapi_abort called for %lu\n",
- ((idescsi_pc_t *) rq->special)->scsi_cmd->serial_number);
+ ((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number);
#endif
rq->errors |= ERROR_MAX;
@@ -316,7 +286,7 @@
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
struct request *rq = HWGROUP(drive)->rq;
- idescsi_pc_t *pc = (idescsi_pc_t *) rq->special;
+ struct ide_atapi_pc *pc = (struct ide_atapi_pc *) rq->special;
int log = test_bit(IDESCSI_LOG_CMD, &scsi->log);
struct Scsi_Host *host;
int errors = rq->errors;
@@ -328,20 +298,23 @@
}
ide_end_drive_cmd (drive, 0, 0);
if (blk_sense_request(rq)) {
- idescsi_pc_t *opc = (idescsi_pc_t *) rq->buffer;
+ struct ide_atapi_pc *opc = (struct ide_atapi_pc *) rq->buffer;
if (log) {
printk ("ide-scsi: %s: wrap up check %lu, rst = ", drive->name, opc->scsi_cmd->serial_number);
- ide_scsi_hex_dump(pc->buffer, 16);
+ ide_scsi_hex_dump(pc->buf, 16);
}
- memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buffer, SCSI_SENSE_BUFFERSIZE);
- kfree(pc->buffer);
+ memcpy((void *) opc->scsi_cmd->sense_buffer, pc->buf,
+ SCSI_SENSE_BUFFERSIZE);
+ kfree(pc->buf);
kfree(pc);
kfree(rq);
pc = opc;
rq = pc->rq;
pc->scsi_cmd->result = (CHECK_CONDITION << 1) |
- ((test_bit(PC_TIMEDOUT, &pc->flags)?DID_TIME_OUT:DID_OK) << 16);
- } else if (test_bit(PC_TIMEDOUT, &pc->flags)) {
+ (((pc->flags & PC_FLAG_TIMEDOUT) ?
+ DID_TIME_OUT :
+ DID_OK) << 16);
+ } else if (pc->flags & PC_FLAG_TIMEDOUT) {
if (log)
printk (KERN_WARNING "ide-scsi: %s: timed out for %lu\n",
drive->name, pc->scsi_cmd->serial_number);
@@ -370,7 +343,7 @@
return 0;
}
-static inline unsigned long get_timeout(idescsi_pc_t *pc)
+static inline unsigned long get_timeout(struct ide_atapi_pc *pc)
{
return max_t(unsigned long, WAIT_CMD, pc->timeout - jiffies);
}
@@ -378,12 +351,12 @@
static int idescsi_expiry(ide_drive_t *drive)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- idescsi_pc_t *pc = scsi->pc;
+ struct ide_atapi_pc *pc = scsi->pc;
#if IDESCSI_DEBUG_LOG
printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies);
#endif
- set_bit(PC_TIMEDOUT, &pc->flags);
+ pc->flags |= PC_FLAG_TIMEDOUT;
return 0; /* we do not want the ide subsystem to retry */
}
@@ -395,7 +368,7 @@
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
ide_hwif_t *hwif = drive->hwif;
- idescsi_pc_t *pc = scsi->pc;
+ struct ide_atapi_pc *pc = scsi->pc;
struct request *rq = pc->rq;
unsigned int temp;
u16 bcount;
@@ -405,7 +378,7 @@
printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n");
#endif /* IDESCSI_DEBUG_LOG */
- if (test_bit(PC_TIMEDOUT, &pc->flags)){
+ if (pc->flags & PC_FLAG_TIMEDOUT) {
#if IDESCSI_DEBUG_LOG
printk(KERN_WARNING "idescsi_pc_intr: got timed out packet %lu at %lu\n",
pc->scsi_cmd->serial_number, jiffies);
@@ -414,11 +387,12 @@
idescsi_end_request (drive, 1, 0);
return ide_stopped;
}
- if (test_and_clear_bit (PC_DMA_IN_PROGRESS, &pc->flags)) {
+ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
+ pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
#if IDESCSI_DEBUG_LOG
printk ("ide-scsi: %s: DMA complete\n", drive->name);
#endif /* IDESCSI_DEBUG_LOG */
- pc->actually_transferred=pc->request_transfer;
+ pc->xferred = pc->req_xfer;
(void) HWIF(drive)->ide_dma_end(drive);
}
@@ -428,42 +402,44 @@
if ((stat & DRQ_STAT) == 0) {
/* No more interrupts */
if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
- printk (KERN_INFO "Packet command completed, %d bytes transferred\n", pc->actually_transferred);
+ printk(KERN_INFO "Packet command completed, %d bytes"
+ " transferred\n", pc->xferred);
local_irq_enable_in_hardirq();
if (stat & ERR_STAT)
rq->errors++;
idescsi_end_request (drive, 1, 0);
return ide_stopped;
}
- bcount = (hwif->INB(IDE_BCOUNTH_REG) << 8) |
- hwif->INB(IDE_BCOUNTL_REG);
- ireason = hwif->INB(IDE_IREASON_REG);
+ bcount = (hwif->INB(hwif->io_ports[IDE_BCOUNTH_OFFSET]) << 8) |
+ hwif->INB(hwif->io_ports[IDE_BCOUNTL_OFFSET]);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);
if (ireason & CD) {
printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n");
return ide_do_reset (drive);
}
if (ireason & IO) {
- temp = pc->actually_transferred + bcount;
- if (temp > pc->request_transfer) {
- if (temp > pc->buffer_size) {
+ temp = pc->xferred + bcount;
+ if (temp > pc->req_xfer) {
+ if (temp > pc->buf_size) {
printk(KERN_ERR "ide-scsi: The scsi wants to "
"send us more data than expected "
"- discarding data\n");
- temp = pc->buffer_size - pc->actually_transferred;
+ temp = pc->buf_size - pc->xferred;
if (temp) {
- clear_bit(PC_WRITING, &pc->flags);
+ pc->flags &= ~PC_FLAG_WRITING;
if (pc->sg)
- idescsi_input_buffers(drive, pc, temp);
+ idescsi_input_buffers(drive, pc,
+ temp);
else
- drive->hwif->atapi_input_bytes(drive, pc->current_position, temp);
+ drive->hwif->atapi_input_bytes(drive, pc->cur_pos, temp);
printk(KERN_ERR "ide-scsi: transferred"
" %d of %d bytes\n",
temp, bcount);
}
- pc->actually_transferred += temp;
- pc->current_position += temp;
- idescsi_discard_data(drive, bcount - temp);
+ pc->xferred += temp;
+ pc->cur_pos += temp;
+ ide_atapi_discard_data(drive, bcount - temp);
ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
return ide_started;
}
@@ -473,23 +449,23 @@
}
}
if (ireason & IO) {
- clear_bit(PC_WRITING, &pc->flags);
+ pc->flags &= ~PC_FLAG_WRITING;
if (pc->sg)
idescsi_input_buffers(drive, pc, bcount);
else
- hwif->atapi_input_bytes(drive, pc->current_position,
+ hwif->atapi_input_bytes(drive, pc->cur_pos,
bcount);
} else {
- set_bit(PC_WRITING, &pc->flags);
+ pc->flags |= PC_FLAG_WRITING;
if (pc->sg)
idescsi_output_buffers(drive, pc, bcount);
else
- hwif->atapi_output_bytes(drive, pc->current_position,
+ hwif->atapi_output_bytes(drive, pc->cur_pos,
bcount);
}
/* Update the current position */
- pc->actually_transferred += bcount;
- pc->current_position += bcount;
+ pc->xferred += bcount;
+ pc->cur_pos += bcount;
/* And set the interrupt handler again */
ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
@@ -500,7 +476,7 @@
{
ide_hwif_t *hwif = drive->hwif;
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- idescsi_pc_t *pc = scsi->pc;
+ struct ide_atapi_pc *pc = scsi->pc;
ide_startstop_t startstop;
u8 ireason;
@@ -509,7 +485,7 @@
"initiated yet DRQ isn't asserted\n");
return startstop;
}
- ireason = hwif->INB(IDE_IREASON_REG);
+ ireason = hwif->INB(hwif->io_ports[IDE_IREASON_OFFSET]);
if ((ireason & CD) == 0 || (ireason & IO)) {
printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while "
"issuing a packet command\n");
@@ -520,34 +496,34 @@
ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
/* Send the actual packet */
drive->hwif->atapi_output_bytes(drive, scsi->pc->c, 12);
- if (test_bit (PC_DMA_OK, &pc->flags)) {
- set_bit (PC_DMA_IN_PROGRESS, &pc->flags);
+ if (pc->flags & PC_FLAG_DMA_OK) {
+ pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
hwif->dma_start(drive);
}
return ide_started;
}
-static inline int idescsi_set_direction(idescsi_pc_t *pc)
+static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
{
switch (pc->c[0]) {
case READ_6: case READ_10: case READ_12:
- clear_bit(PC_WRITING, &pc->flags);
+ pc->flags &= ~PC_FLAG_WRITING;
return 0;
case WRITE_6: case WRITE_10: case WRITE_12:
- set_bit(PC_WRITING, &pc->flags);
+ pc->flags |= PC_FLAG_WRITING;
return 0;
default:
return 1;
}
}
-static int idescsi_map_sg(ide_drive_t *drive, idescsi_pc_t *pc)
+static int idescsi_map_sg(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
ide_hwif_t *hwif = drive->hwif;
struct scatterlist *sg, *scsi_sg;
int segments;
- if (!pc->request_transfer || pc->request_transfer % 1024)
+ if (!pc->req_xfer || pc->req_xfer % 1024)
return 1;
if (idescsi_set_direction(pc))
@@ -566,21 +542,21 @@
return 0;
}
-/*
- * Issue a packet command
- */
-static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc)
+static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive,
+ struct ide_atapi_pc *pc)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
ide_hwif_t *hwif = drive->hwif;
u16 bcount;
u8 dma = 0;
- scsi->pc=pc; /* Set the current packet command */
- pc->actually_transferred=0; /* We haven't transferred any data yet */
- pc->current_position=pc->buffer;
+ /* Set the current packet command */
+ scsi->pc = pc;
+ /* We haven't transferred any data yet */
+ pc->xferred = 0;
+ pc->cur_pos = pc->buf;
/* Request to transfer the entire buffer at once */
- bcount = min(pc->request_transfer, 63 * 1024);
+ bcount = min(pc->req_xfer, 63 * 1024);
if (drive->using_dma && !idescsi_map_sg(drive, pc)) {
hwif->sg_mapped = 1;
@@ -591,7 +567,7 @@
ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma);
if (dma)
- set_bit(PC_DMA_OK, &pc->flags);
+ pc->flags |= PC_FLAG_DMA_OK;
if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) {
ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc,
@@ -599,7 +575,7 @@
return ide_started;
} else {
/* Issue the packet command */
- HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG);
+ hwif->OUTB(WIN_PACKETCMD, hwif->io_ports[IDE_COMMAND_OFFSET]);
return idescsi_transfer_pc(drive);
}
}
@@ -615,7 +591,8 @@
#endif /* IDESCSI_DEBUG_LOG */
if (blk_sense_request(rq) || blk_special_request(rq)) {
- return idescsi_issue_pc (drive, (idescsi_pc_t *) rq->special);
+ return idescsi_issue_pc(drive,
+ (struct ide_atapi_pc *) rq->special);
}
blk_dump_rq_flags(rq, "ide-scsi: unsup command");
idescsi_end_request (drive, 0, 0);
@@ -773,15 +750,15 @@
idescsi_scsi_t *scsi = scsihost_to_idescsi(host);
ide_drive_t *drive = scsi->drive;
struct request *rq = NULL;
- idescsi_pc_t *pc = NULL;
+ struct ide_atapi_pc *pc = NULL;
if (!drive) {
scmd_printk (KERN_ERR, cmd, "drive not present\n");
goto abort;
}
scsi = drive_to_idescsi(drive);
- pc = kmalloc (sizeof (idescsi_pc_t), GFP_ATOMIC);
- rq = kmalloc (sizeof (struct request), GFP_ATOMIC);
+ pc = kmalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC);
+ rq = kmalloc(sizeof(struct request), GFP_ATOMIC);
if (rq == NULL || pc == NULL) {
printk (KERN_ERR "ide-scsi: %s: out of memory\n", drive->name);
goto abort;
@@ -791,11 +768,11 @@
pc->flags = 0;
pc->rq = rq;
memcpy (pc->c, cmd->cmnd, cmd->cmd_len);
- pc->buffer = NULL;
+ pc->buf = NULL;
pc->sg = scsi_sglist(cmd);
pc->sg_cnt = scsi_sg_count(cmd);
pc->b_count = 0;
- pc->request_transfer = pc->buffer_size = scsi_bufflen(cmd);
+ pc->req_xfer = pc->buf_size = scsi_bufflen(cmd);
pc->scsi_cmd = cmd;
pc->done = done;
pc->timeout = jiffies + cmd->timeout_per_command;
@@ -866,7 +843,7 @@
printk (KERN_ERR "ide-scsi: cmd aborted!\n");
if (blk_sense_request(scsi->pc->rq))
- kfree(scsi->pc->buffer);
+ kfree(scsi->pc->buf);
kfree(scsi->pc->rq);
kfree(scsi->pc);
scsi->pc = NULL;
@@ -916,7 +893,7 @@
if (__blk_end_request(req, -EIO, 0))
BUG();
if (blk_sense_request(req))
- kfree(scsi->pc->buffer);
+ kfree(scsi->pc->buf);
kfree(scsi->pc);
scsi->pc = NULL;
kfree(req);
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index c72014a..65dc18d 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -3937,7 +3937,7 @@
if (ipr_is_gata(res) && res->sata_port) {
ap = res->sata_port->ap;
spin_unlock_irq(scsi_cmd->device->host->host_lock);
- ata_do_eh(ap, NULL, NULL, ipr_sata_reset, NULL);
+ ata_std_error_handler(ap);
spin_lock_irq(scsi_cmd->device->host->host_lock);
list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
@@ -5041,33 +5041,6 @@
}
/**
- * ipr_tf_read - Read the current ATA taskfile for the ATA port
- * @ap: ATA port
- * @tf: destination ATA taskfile
- *
- * Return value:
- * none
- **/
-static void ipr_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct ipr_sata_port *sata_port = ap->private_data;
- struct ipr_ioasa_gata *g = &sata_port->ioasa;
-
- tf->feature = g->error;
- tf->nsect = g->nsect;
- tf->lbal = g->lbal;
- tf->lbam = g->lbam;
- tf->lbah = g->lbah;
- tf->device = g->device;
- tf->command = g->status;
- tf->hob_nsect = g->hob_nsect;
- tf->hob_lbal = g->hob_lbal;
- tf->hob_lbam = g->hob_lbam;
- tf->hob_lbah = g->hob_lbah;
- tf->ctl = g->alt_status;
-}
-
-/**
* ipr_copy_sata_tf - Copy a SATA taskfile to an IOA data structure
* @regs: destination
* @tf: source ATA taskfile
@@ -5245,40 +5218,41 @@
}
/**
- * ipr_ata_check_status - Return last ATA status
- * @ap: ATA port
+ * ipr_qc_fill_rtf - Read result TF
+ * @qc: ATA queued command
*
* Return value:
- * ATA status
+ * true
**/
-static u8 ipr_ata_check_status(struct ata_port *ap)
+static bool ipr_qc_fill_rtf(struct ata_queued_cmd *qc)
{
- struct ipr_sata_port *sata_port = ap->private_data;
- return sata_port->ioasa.status;
-}
+ struct ipr_sata_port *sata_port = qc->ap->private_data;
+ struct ipr_ioasa_gata *g = &sata_port->ioasa;
+ struct ata_taskfile *tf = &qc->result_tf;
-/**
- * ipr_ata_check_altstatus - Return last ATA altstatus
- * @ap: ATA port
- *
- * Return value:
- * Alt ATA status
- **/
-static u8 ipr_ata_check_altstatus(struct ata_port *ap)
-{
- struct ipr_sata_port *sata_port = ap->private_data;
- return sata_port->ioasa.alt_status;
+ tf->feature = g->error;
+ tf->nsect = g->nsect;
+ tf->lbal = g->lbal;
+ tf->lbam = g->lbam;
+ tf->lbah = g->lbah;
+ tf->device = g->device;
+ tf->command = g->status;
+ tf->hob_nsect = g->hob_nsect;
+ tf->hob_lbal = g->hob_lbal;
+ tf->hob_lbam = g->hob_lbam;
+ tf->hob_lbah = g->hob_lbah;
+ tf->ctl = g->alt_status;
+
+ return true;
}
static struct ata_port_operations ipr_sata_ops = {
- .check_status = ipr_ata_check_status,
- .check_altstatus = ipr_ata_check_altstatus,
- .dev_select = ata_noop_dev_select,
.phy_reset = ipr_ata_phy_reset,
+ .hardreset = ipr_sata_reset,
.post_internal_cmd = ipr_ata_post_internal,
- .tf_read = ipr_tf_read,
.qc_prep = ata_noop_qc_prep,
.qc_issue = ipr_qc_issue,
+ .qc_fill_rtf = ipr_qc_fill_rtf,
.port_start = ata_sas_port_start,
.port_stop = ata_sas_port_stop
};
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index b0e5ac3..a4811e4 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -225,10 +225,12 @@
return 0;
}
-static u8 sas_ata_check_status(struct ata_port *ap)
+static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc)
{
- struct domain_device *dev = ap->private_data;
- return dev->sata_dev.tf.command;
+ struct domain_device *dev = qc->ap->private_data;
+
+ memcpy(&qc->result_tf, &dev->sata_dev.tf, sizeof(qc->result_tf));
+ return true;
}
static void sas_ata_phy_reset(struct ata_port *ap)
@@ -292,12 +294,6 @@
}
}
-static void sas_ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct domain_device *dev = ap->private_data;
- memcpy(tf, &dev->sata_dev.tf, sizeof (*tf));
-}
-
static int sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
u32 val)
{
@@ -348,14 +344,11 @@
}
static struct ata_port_operations sas_sata_ops = {
- .check_status = sas_ata_check_status,
- .check_altstatus = sas_ata_check_status,
- .dev_select = ata_noop_dev_select,
.phy_reset = sas_ata_phy_reset,
.post_internal_cmd = sas_ata_post_internal,
- .tf_read = sas_ata_tf_read,
.qc_prep = ata_noop_qc_prep,
.qc_issue = sas_ata_qc_issue,
+ .qc_fill_rtf = sas_ata_qc_fill_rtf,
.port_start = ata_sas_port_start,
.port_stop = ata_sas_port_stop,
.scr_read = sas_ata_scr_read,
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index 31b9af2..709a6f7 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -295,11 +295,14 @@
case FANOUT_DEV:
error = sas_discover_root_expander(dev);
break;
-#ifdef CONFIG_SCSI_SAS_ATA
case SATA_DEV:
case SATA_PM:
+#ifdef CONFIG_SCSI_SAS_ATA
error = sas_discover_sata(dev);
break;
+#else
+ SAS_DPRINTK("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
+ /* Fall through */
#endif
default:
error = -ENXIO;
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
index 5ec0665..e55b903 100644
--- a/drivers/scsi/mvsas.c
+++ b/drivers/scsi/mvsas.c
@@ -37,11 +37,13 @@
#include <linux/dma-mapping.h>
#include <linux/ctype.h>
#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
#include <asm/io.h>
#define DRV_NAME "mvsas"
-#define DRV_VERSION "0.5.1"
-#define _MV_DUMP 0
+#define DRV_VERSION "0.5.2"
+#define _MV_DUMP 0
#define MVS_DISABLE_NVRAM
#define MVS_DISABLE_MSI
@@ -52,7 +54,7 @@
readl(regs + MVS_##reg); \
} while (0)
-#define MVS_ID_NOT_MAPPED 0xff
+#define MVS_ID_NOT_MAPPED 0x7f
#define MVS_CHIP_SLOT_SZ (1U << mvi->chip->slot_width)
/* offset for D2H FIS in the Received FIS List Structure */
@@ -84,6 +86,7 @@
MVS_RX_FIS_COUNT = 17, /* Optional rx'd FISs (max 17) */
MVS_QUEUE_SIZE = 30, /* Support Queue depth */
+ MVS_CAN_QUEUE = MVS_SLOTS - 1, /* SCSI Queue depth */
};
/* unchangeable hardware details */
@@ -358,7 +361,20 @@
/* VSR */
/* PHYMODE 6 (CDB) */
- PHY_MODE6_DTL_SPEED = (1U << 27),
+ PHY_MODE6_LATECLK = (1U << 29), /* Lock Clock */
+ PHY_MODE6_DTL_SPEED = (1U << 27), /* Digital Loop Speed */
+ PHY_MODE6_FC_ORDER = (1U << 26), /* Fibre Channel Mode Order*/
+ PHY_MODE6_MUCNT_EN = (1U << 24), /* u Count Enable */
+ PHY_MODE6_SEL_MUCNT_LEN = (1U << 22), /* Training Length Select */
+ PHY_MODE6_SELMUPI = (1U << 20), /* Phase Multi Select (init) */
+ PHY_MODE6_SELMUPF = (1U << 18), /* Phase Multi Select (final) */
+ PHY_MODE6_SELMUFF = (1U << 16), /* Freq Loop Multi Sel(final) */
+ PHY_MODE6_SELMUFI = (1U << 14), /* Freq Loop Multi Sel(init) */
+ PHY_MODE6_FREEZE_LOOP = (1U << 12), /* Freeze Rx CDR Loop */
+ PHY_MODE6_INT_RXFOFFS = (1U << 3), /* Rx CDR Freq Loop Enable */
+ PHY_MODE6_FRC_RXFOFFS = (1U << 2), /* Initial Rx CDR Offset */
+ PHY_MODE6_STAU_0D8 = (1U << 1), /* Rx CDR Freq Loop Saturate */
+ PHY_MODE6_RXSAT_DIS = (1U << 0), /* Saturate Ctl */
};
enum mvs_info_flags {
@@ -511,7 +527,43 @@
};
enum error_info_rec {
- CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */
+ CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */
+ CMD_PI_ERR = (1U << 30), /* Protection info error. see flags2 */
+ RSP_OVER = (1U << 29), /* rsp buffer overflow */
+ RETRY_LIM = (1U << 28), /* FIS/frame retry limit exceeded */
+ UNK_FIS = (1U << 27), /* unknown FIS */
+ DMA_TERM = (1U << 26), /* DMA terminate primitive rx'd */
+ SYNC_ERR = (1U << 25), /* SYNC rx'd during frame xmit */
+ TFILE_ERR = (1U << 24), /* SATA taskfile Error bit set */
+ R_ERR = (1U << 23), /* SATA returned R_ERR prim */
+ RD_OFS = (1U << 20), /* Read DATA frame invalid offset */
+ XFER_RDY_OFS = (1U << 19), /* XFER_RDY offset error */
+ UNEXP_XFER_RDY = (1U << 18), /* unexpected XFER_RDY error */
+ DATA_OVER_UNDER = (1U << 16), /* data overflow/underflow */
+ INTERLOCK = (1U << 15), /* interlock error */
+ NAK = (1U << 14), /* NAK rx'd */
+ ACK_NAK_TO = (1U << 13), /* ACK/NAK timeout */
+ CXN_CLOSED = (1U << 12), /* cxn closed w/out ack/nak */
+ OPEN_TO = (1U << 11), /* I_T nexus lost, open cxn timeout */
+ PATH_BLOCKED = (1U << 10), /* I_T nexus lost, pathway blocked */
+ NO_DEST = (1U << 9), /* I_T nexus lost, no destination */
+ STP_RES_BSY = (1U << 8), /* STP resources busy */
+ BREAK = (1U << 7), /* break received */
+ BAD_DEST = (1U << 6), /* bad destination */
+ BAD_PROTO = (1U << 5), /* protocol not supported */
+ BAD_RATE = (1U << 4), /* cxn rate not supported */
+ WRONG_DEST = (1U << 3), /* wrong destination error */
+ CREDIT_TO = (1U << 2), /* credit timeout */
+ WDOG_TO = (1U << 1), /* watchdog timeout */
+ BUF_PAR = (1U << 0), /* buffer parity error */
+};
+
+enum error_info_rec_2 {
+ SLOT_BSY_ERR = (1U << 31), /* Slot Busy Error */
+ GRD_CHK_ERR = (1U << 14), /* Guard Check Error */
+ APP_CHK_ERR = (1U << 13), /* Application Check error */
+ REF_CHK_ERR = (1U << 12), /* Reference Check Error */
+ USR_BLK_NM = (1U << 0), /* User Block Number */
};
struct mvs_chip_info {
@@ -543,28 +595,12 @@
__le32 reserved[4];
};
-struct mvs_slot_info {
- struct sas_task *task;
- u32 n_elem;
- u32 tx;
-
- /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
- * and PRD table
- */
- void *buf;
- dma_addr_t buf_dma;
-#if _MV_DUMP
- u32 cmd_size;
-#endif
-
- void *response;
-};
-
struct mvs_port {
struct asd_sas_port sas_port;
u8 port_attached;
u8 taskfileset;
u8 wide_port_phymap;
+ struct list_head list;
};
struct mvs_phy {
@@ -582,6 +618,27 @@
u32 frame_rcvd_size;
u8 frame_rcvd[32];
u8 phy_attached;
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
+};
+
+struct mvs_slot_info {
+ struct list_head list;
+ struct sas_task *task;
+ u32 n_elem;
+ u32 tx;
+
+ /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+ * and PRD table
+ */
+ void *buf;
+ dma_addr_t buf_dma;
+#if _MV_DUMP
+ u32 cmd_size;
+#endif
+
+ void *response;
+ struct mvs_port *port;
};
struct mvs_info {
@@ -612,21 +669,14 @@
const struct mvs_chip_info *chip;
- unsigned long tags[MVS_SLOTS];
+ u8 tags[MVS_SLOTS];
struct mvs_slot_info slot_info[MVS_SLOTS];
/* further per-slot information */
struct mvs_phy phy[MVS_MAX_PHYS];
struct mvs_port port[MVS_MAX_PHYS];
-
- u32 can_queue; /* per adapter */
- u32 tag_out; /*Get*/
- u32 tag_in; /*Give*/
-};
-
-struct mvs_queue_task {
- struct list_head list;
-
- void *uldd_task;
+#ifdef MVS_USE_TASKLET
+ struct tasklet_struct tasklet;
+#endif
};
static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
@@ -641,10 +691,11 @@
static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i);
static void mvs_detect_porttype(struct mvs_info *mvi, int i);
static void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
+static void mvs_release_task(struct mvs_info *mvi, int phy_no);
static int mvs_scan_finished(struct Scsi_Host *, unsigned long);
static void mvs_scan_start(struct Scsi_Host *);
-static int mvs_sas_slave_alloc(struct scsi_device *scsi_dev);
+static int mvs_slave_configure(struct scsi_device *sdev);
static struct scsi_transport_template *mvs_stt;
@@ -659,7 +710,7 @@
.name = DRV_NAME,
.queuecommand = sas_queuecommand,
.target_alloc = sas_target_alloc,
- .slave_configure = sas_slave_configure,
+ .slave_configure = mvs_slave_configure,
.slave_destroy = sas_slave_destroy,
.scan_finished = mvs_scan_finished,
.scan_start = mvs_scan_start,
@@ -674,7 +725,7 @@
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_bus_reset_handler = sas_eh_bus_reset_handler,
- .slave_alloc = mvs_sas_slave_alloc,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
};
@@ -709,10 +760,10 @@
printk("\n");
}
+#if _MV_DUMP
static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
enum sas_protocol proto)
{
-#if _MV_DUMP
u32 offset;
struct pci_dev *pdev = mvi->pdev;
struct mvs_slot_info *slot = &mvi->slot_info[tag];
@@ -723,14 +774,14 @@
tag);
mvs_hexdump(32, (u8 *) slot->response,
(u32) slot->buf_dma + offset);
-#endif
}
+#endif
static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
enum sas_protocol proto)
{
#if _MV_DUMP
- u32 sz, w_ptr, r_ptr;
+ u32 sz, w_ptr;
u64 addr;
void __iomem *regs = mvi->regs;
struct pci_dev *pdev = mvi->pdev;
@@ -738,12 +789,10 @@
/*Delivery Queue */
sz = mr32(TX_CFG) & TX_RING_SZ_MASK;
- w_ptr = mr32(TX_PROD_IDX) & TX_RING_SZ_MASK;
- r_ptr = mr32(TX_CONS_IDX) & TX_RING_SZ_MASK;
+ w_ptr = slot->tx;
addr = mr32(TX_HI) << 16 << 16 | mr32(TX_LO);
dev_printk(KERN_DEBUG, &pdev->dev,
- "Delivery Queue Size=%04d , WRT_PTR=%04X , RD_PTR=%04X\n",
- sz, w_ptr, r_ptr);
+ "Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
dev_printk(KERN_DEBUG, &pdev->dev,
"Delivery Queue Base Address=0x%llX (PA)"
"(tx_dma=0x%llX), Entry=%04d\n",
@@ -751,11 +800,11 @@
mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
(u32) mvi->tx_dma + sizeof(u32) * w_ptr);
/*Command List */
- addr = mr32(CMD_LIST_HI) << 16 << 16 | mr32(CMD_LIST_LO);
+ addr = mvi->slot_dma;
dev_printk(KERN_DEBUG, &pdev->dev,
"Command List Base Address=0x%llX (PA)"
"(slot_dma=0x%llX), Header=%03d\n",
- addr, mvi->slot_dma, tag);
+ addr, slot->buf_dma, tag);
dev_printk(KERN_DEBUG, &pdev->dev, "Command Header[%03d]:\n", tag);
/*mvs_cmd_hdr */
mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
@@ -779,7 +828,7 @@
static void mvs_hba_cq_dump(struct mvs_info *mvi)
{
-#if _MV_DUMP
+#if (_MV_DUMP > 2)
u64 addr;
void __iomem *regs = mvi->regs;
struct pci_dev *pdev = mvi->pdev;
@@ -788,8 +837,8 @@
/*Completion Queue */
addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
- dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%08X\n",
- (u32) mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
+ dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%p\n",
+ mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
dev_printk(KERN_DEBUG, &pdev->dev,
"Completion List Base Address=0x%llX (PA), "
"CQ_Entry=%04d, CQ_WP=0x%08X\n",
@@ -854,34 +903,53 @@
return rc;
}
+static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
+{
+ if (task->lldd_task) {
+ struct mvs_slot_info *slot;
+ slot = (struct mvs_slot_info *) task->lldd_task;
+ *tag = slot - mvi->slot_info;
+ return 1;
+ }
+ return 0;
+}
+
static void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
{
- mvi->tag_in = (mvi->tag_in + 1) & (MVS_SLOTS - 1);
- mvi->tags[mvi->tag_in] = tag;
+ void *bitmap = (void *) &mvi->tags;
+ clear_bit(tag, bitmap);
}
static void mvs_tag_free(struct mvs_info *mvi, u32 tag)
{
- mvi->tag_out = (mvi->tag_out - 1) & (MVS_SLOTS - 1);
+ mvs_tag_clear(mvi, tag);
+}
+
+static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
+{
+ void *bitmap = (void *) &mvi->tags;
+ set_bit(tag, bitmap);
}
static int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
{
- if (mvi->tag_out != mvi->tag_in) {
- *tag_out = mvi->tags[mvi->tag_out];
- mvi->tag_out = (mvi->tag_out + 1) & (MVS_SLOTS - 1);
- return 0;
- }
- return -EBUSY;
+ unsigned int index, tag;
+ void *bitmap = (void *) &mvi->tags;
+
+ index = find_first_zero_bit(bitmap, MVS_SLOTS);
+ tag = index;
+ if (tag >= MVS_SLOTS)
+ return -SAS_QUEUE_FULL;
+ mvs_tag_set(mvi, tag);
+ *tag_out = tag;
+ return 0;
}
static void mvs_tag_init(struct mvs_info *mvi)
{
int i;
for (i = 0; i < MVS_SLOTS; ++i)
- mvi->tags[i] = i;
- mvi->tag_out = 0;
- mvi->tag_in = MVS_SLOTS - 1;
+ mvs_tag_clear(mvi, i);
}
#ifndef MVS_DISABLE_NVRAM
@@ -1013,10 +1081,21 @@
static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
{
struct mvs_phy *phy = &mvi->phy[i];
+ struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
if (!phy->phy_attached)
return;
+ if (sas_phy->phy) {
+ struct sas_phy *sphy = sas_phy->phy;
+
+ sphy->negotiated_linkrate = sas_phy->linkrate;
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+ sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sphy->maximum_linkrate = phy->maximum_linkrate;
+ sphy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ }
+
if (phy->phy_type & PORT_TYPE_SAS) {
struct sas_identify_frame *id;
@@ -1053,80 +1132,149 @@
}
}
-static int mvs_sas_slave_alloc(struct scsi_device *scsi_dev)
+static int mvs_slave_configure(struct scsi_device *sdev)
{
- int rc;
+ struct domain_device *dev = sdev_to_domain_dev(sdev);
+ int ret = sas_slave_configure(sdev);
- rc = sas_slave_alloc(scsi_dev);
+ if (ret)
+ return ret;
- return rc;
+ if (dev_is_sata(dev)) {
+ /* struct ata_port *ap = dev->sata_dev.ap; */
+ /* struct ata_device *adev = ap->link.device; */
+
+ /* clamp at no NCQ for the time being */
+ /* adev->flags |= ATA_DFLAG_NCQ_OFF; */
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+ }
+ return 0;
}
-static void mvs_int_port(struct mvs_info *mvi, int port_no, u32 events)
+static void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
{
struct pci_dev *pdev = mvi->pdev;
struct sas_ha_struct *sas_ha = &mvi->sas;
- struct mvs_phy *phy = &mvi->phy[port_no];
+ struct mvs_phy *phy = &mvi->phy[phy_no];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
- phy->irq_status = mvs_read_port_irq_stat(mvi, port_no);
+ phy->irq_status = mvs_read_port_irq_stat(mvi, phy_no);
/*
* events is port event now ,
* we need check the interrupt status which belongs to per port.
*/
dev_printk(KERN_DEBUG, &pdev->dev,
"Port %d Event = %X\n",
- port_no, phy->irq_status);
+ phy_no, phy->irq_status);
if (phy->irq_status & (PHYEV_POOF | PHYEV_DEC_ERR)) {
- if (!mvs_is_phy_ready(mvi, port_no)) {
+ mvs_release_task(mvi, phy_no);
+ if (!mvs_is_phy_ready(mvi, phy_no)) {
sas_phy_disconnected(sas_phy);
sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Port %d Unplug Notice\n", phy_no);
+
} else
mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL);
}
if (!(phy->irq_status & PHYEV_DEC_ERR)) {
if (phy->irq_status & PHYEV_COMWAKE) {
- u32 tmp = mvs_read_port_irq_mask(mvi, port_no);
- mvs_write_port_irq_mask(mvi, port_no,
+ u32 tmp = mvs_read_port_irq_mask(mvi, phy_no);
+ mvs_write_port_irq_mask(mvi, phy_no,
tmp | PHYEV_SIG_FIS);
}
if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
- phy->phy_status = mvs_is_phy_ready(mvi, port_no);
+ phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
if (phy->phy_status) {
- mvs_detect_porttype(mvi, port_no);
+ mvs_detect_porttype(mvi, phy_no);
if (phy->phy_type & PORT_TYPE_SATA) {
u32 tmp = mvs_read_port_irq_mask(mvi,
- port_no);
+ phy_no);
tmp &= ~PHYEV_SIG_FIS;
mvs_write_port_irq_mask(mvi,
- port_no, tmp);
+ phy_no, tmp);
}
- mvs_update_phyinfo(mvi, port_no, 0);
+ mvs_update_phyinfo(mvi, phy_no, 0);
sas_ha->notify_phy_event(sas_phy,
PHYE_OOB_DONE);
- mvs_bytes_dmaed(mvi, port_no);
+ mvs_bytes_dmaed(mvi, phy_no);
} else {
dev_printk(KERN_DEBUG, &pdev->dev,
"plugin interrupt but phy is gone\n");
mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET,
NULL);
}
- } else if (phy->irq_status & PHYEV_BROAD_CH)
+ } else if (phy->irq_status & PHYEV_BROAD_CH) {
+ mvs_release_task(mvi, phy_no);
sas_ha->notify_port_event(sas_phy,
PORTE_BROADCAST_RCVD);
+ }
}
- mvs_write_port_irq_stat(mvi, port_no, phy->irq_status);
+ mvs_write_port_irq_stat(mvi, phy_no, phy->irq_status);
}
static void mvs_int_sata(struct mvs_info *mvi)
{
- /* FIXME */
+ u32 tmp;
+ void __iomem *regs = mvi->regs;
+ tmp = mr32(INT_STAT_SRS);
+ mw32(INT_STAT_SRS, tmp & 0xFFFF);
}
-static void mvs_slot_free(struct mvs_info *mvi, struct sas_task *task,
+static void mvs_slot_reset(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx)
+{
+ void __iomem *regs = mvi->regs;
+ struct domain_device *dev = task->dev;
+ struct asd_sas_port *sas_port = dev->port;
+ struct mvs_port *port = mvi->slot_info[slot_idx].port;
+ u32 reg_set, phy_mask;
+
+ if (!sas_protocol_ata(task->task_proto)) {
+ reg_set = 0;
+ phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+ sas_port->phy_mask;
+ } else {
+ reg_set = port->taskfileset;
+ phy_mask = sas_port->phy_mask;
+ }
+ mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | slot_idx |
+ (TXQ_CMD_SLOT_RESET << TXQ_CMD_SHIFT) |
+ (phy_mask << TXQ_PHY_SHIFT) |
+ (reg_set << TXQ_SRS_SHIFT));
+
+ mw32(TX_PROD_IDX, mvi->tx_prod);
+ mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+}
+
+static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx, int err)
+{
+ struct mvs_port *port = mvi->slot_info[slot_idx].port;
+ struct task_status_struct *tstat = &task->task_status;
+ struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
+ int stat = SAM_GOOD;
+
+ resp->frame_len = sizeof(struct dev_to_host_fis);
+ memcpy(&resp->ending_fis[0],
+ SATA_RECEIVED_D2H_FIS(port->taskfileset),
+ sizeof(struct dev_to_host_fis));
+ tstat->buf_valid_size = sizeof(*resp);
+ if (unlikely(err))
+ stat = SAS_PROTO_RESPONSE;
+ return stat;
+}
+
+static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
+{
+ u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+ mvs_tag_clear(mvi, slot_idx);
+}
+
+static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
struct mvs_slot_info *slot, u32 slot_idx)
{
if (!sas_protocol_ata(task->task_proto))
@@ -1149,38 +1297,58 @@
/* do nothing */
break;
}
-
+ list_del(&slot->list);
+ task->lldd_task = NULL;
slot->task = NULL;
- mvs_tag_clear(mvi, slot_idx);
+ slot->port = NULL;
}
-static void mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
+static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
u32 slot_idx)
{
struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
- u64 err_dw0 = *(u32 *) slot->response;
- void __iomem *regs = mvi->regs;
- u32 tmp;
+ u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
+ u32 err_dw1 = le32_to_cpu(*(u32 *) (slot->response + 4));
+ int stat = SAM_CHECK_COND;
- if (err_dw0 & CMD_ISS_STPD)
- if (sas_protocol_ata(task->task_proto)) {
- tmp = mr32(INT_STAT_SRS);
- mw32(INT_STAT_SRS, tmp & 0xFFFF);
- }
+ if (err_dw1 & SLOT_BSY_ERR) {
+ stat = SAS_QUEUE_FULL;
+ mvs_slot_reset(mvi, task, slot_idx);
+ }
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ break;
+ case SAS_PROTOCOL_SMP:
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ if (err_dw0 & TFILE_ERR)
+ stat = mvs_sata_done(mvi, task, slot_idx, 1);
+ break;
+ default:
+ break;
+ }
- mvs_hba_sb_dump(mvi, slot_idx, task->task_proto);
+ mvs_hexdump(16, (u8 *) slot->response, 0);
+ return stat;
}
-static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc)
+static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
{
u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
struct sas_task *task = slot->task;
- struct task_status_struct *tstat = &task->task_status;
- struct mvs_port *port = &mvi->port[task->dev->port->id];
+ struct task_status_struct *tstat;
+ struct mvs_port *port;
bool aborted;
void *to;
+ if (unlikely(!task || !task->lldd_task))
+ return -1;
+
+ mvs_hba_cq_dump(mvi);
+
spin_lock(&task->task_state_lock);
aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
if (!aborted) {
@@ -1190,22 +1358,27 @@
}
spin_unlock(&task->task_state_lock);
- if (aborted)
+ if (aborted) {
+ mvs_slot_task_free(mvi, task, slot, slot_idx);
+ mvs_slot_free(mvi, rx_desc);
return -1;
+ }
+ port = slot->port;
+ tstat = &task->task_status;
memset(tstat, 0, sizeof(*tstat));
tstat->resp = SAS_TASK_COMPLETE;
-
- if (unlikely(!port->port_attached)) {
- tstat->stat = SAS_PHY_DOWN;
+ if (unlikely(!port->port_attached || flags)) {
+ mvs_slot_err(mvi, task, slot_idx);
+ if (!sas_protocol_ata(task->task_proto))
+ tstat->stat = SAS_PHY_DOWN;
goto out;
}
/* error info record present */
- if ((rx_desc & RXQ_ERR) && (*(u64 *) slot->response)) {
- tstat->stat = SAM_CHECK_COND;
- mvs_slot_err(mvi, task, slot_idx);
+ if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
+ tstat->stat = mvs_slot_err(mvi, task, slot_idx);
goto out;
}
@@ -1242,21 +1415,7 @@
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
- struct ata_task_resp *resp =
- (struct ata_task_resp *)tstat->buf;
-
- if ((rx_desc & (RXQ_DONE | RXQ_ERR | RXQ_ATTN)) ==
- RXQ_DONE)
- tstat->stat = SAM_GOOD;
- else
- tstat->stat = SAM_CHECK_COND;
-
- resp->frame_len = sizeof(struct dev_to_host_fis);
- memcpy(&resp->ending_fis[0],
- SATA_RECEIVED_D2H_FIS(port->taskfileset),
- sizeof(struct dev_to_host_fis));
- if (resp->ending_fis[2] & ATA_ERR)
- mvs_hexdump(16, resp->ending_fis, 0);
+ tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
break;
}
@@ -1266,11 +1425,34 @@
}
out:
- mvs_slot_free(mvi, task, slot, slot_idx);
+ mvs_slot_task_free(mvi, task, slot, slot_idx);
+ if (unlikely(tstat->stat != SAS_QUEUE_FULL))
+ mvs_slot_free(mvi, rx_desc);
+
+ spin_unlock(&mvi->lock);
task->task_done(task);
+ spin_lock(&mvi->lock);
return tstat->stat;
}
+static void mvs_release_task(struct mvs_info *mvi, int phy_no)
+{
+ struct list_head *pos, *n;
+ struct mvs_slot_info *slot;
+ struct mvs_phy *phy = &mvi->phy[phy_no];
+ struct mvs_port *port = phy->port;
+ u32 rx_desc;
+
+ if (!port)
+ return;
+
+ list_for_each_safe(pos, n, &port->list) {
+ slot = container_of(pos, struct mvs_slot_info, list);
+ rx_desc = (u32) (slot - mvi->slot_info);
+ mvs_slot_complete(mvi, rx_desc, 1);
+ }
+}
+
static void mvs_int_full(struct mvs_info *mvi)
{
void __iomem *regs = mvi->regs;
@@ -1305,40 +1487,43 @@
* we don't have to stall the CPU reading that register.
* The actual RX ring is offset by one dword, due to this.
*/
- rx_prod_idx = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
- if (rx_prod_idx == 0xfff) { /* h/w hasn't touched RX ring yet */
- mvi->rx_cons = 0xfff;
+ rx_prod_idx = mvi->rx_cons;
+ mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
+ if (mvi->rx_cons == 0xfff) /* h/w hasn't touched RX ring yet */
return 0;
- }
/* The CMPL_Q may come late, read from register and try again
* note: if coalescing is enabled,
* it will need to read from register every time for sure
*/
if (mvi->rx_cons == rx_prod_idx)
- return 0;
+ mvi->rx_cons = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
- if (mvi->rx_cons == 0xfff)
- mvi->rx_cons = MVS_RX_RING_SZ - 1;
+ if (mvi->rx_cons == rx_prod_idx)
+ return 0;
while (mvi->rx_cons != rx_prod_idx) {
/* increment our internal RX consumer pointer */
- mvi->rx_cons = (mvi->rx_cons + 1) & (MVS_RX_RING_SZ - 1);
+ rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
- rx_desc = le32_to_cpu(mvi->rx[mvi->rx_cons + 1]);
-
- mvs_hba_cq_dump(mvi);
+ rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
if (likely(rx_desc & RXQ_DONE))
- mvs_slot_complete(mvi, rx_desc);
+ mvs_slot_complete(mvi, rx_desc, 0);
if (rx_desc & RXQ_ATTN) {
attn = true;
dev_printk(KERN_DEBUG, &pdev->dev, "ATTN %X\n",
rx_desc);
} else if (rx_desc & RXQ_ERR) {
+ if (!(rx_desc & RXQ_DONE))
+ mvs_slot_complete(mvi, rx_desc, 0);
dev_printk(KERN_DEBUG, &pdev->dev, "RXQ_ERR %X\n",
rx_desc);
+ } else if (rx_desc & RXQ_SLOT_RESET) {
+ dev_printk(KERN_DEBUG, &pdev->dev, "Slot reset[%X]\n",
+ rx_desc);
+ mvs_slot_free(mvi, rx_desc);
}
}
@@ -1348,6 +1533,23 @@
return 0;
}
+#ifdef MVS_USE_TASKLET
+static void mvs_tasklet(unsigned long data)
+{
+ struct mvs_info *mvi = (struct mvs_info *) data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mvi->lock, flags);
+
+#ifdef MVS_DISABLE_MSI
+ mvs_int_full(mvi);
+#else
+ mvs_int_rx(mvi, true);
+#endif
+ spin_unlock_irqrestore(&mvi->lock, flags);
+}
+#endif
+
static irqreturn_t mvs_interrupt(int irq, void *opaque)
{
struct mvs_info *mvi = opaque;
@@ -1356,18 +1558,21 @@
stat = mr32(GBL_INT_STAT);
- /* clear CMD_CMPLT ASAP */
- mw32_f(INT_STAT, CINT_DONE);
-
if (stat == 0 || stat == 0xffffffff)
return IRQ_NONE;
+ /* clear CMD_CMPLT ASAP */
+ mw32_f(INT_STAT, CINT_DONE);
+
+#ifndef MVS_USE_TASKLET
spin_lock(&mvi->lock);
mvs_int_full(mvi);
spin_unlock(&mvi->lock);
-
+#else
+ tasklet_schedule(&mvi->tasklet);
+#endif
return IRQ_HANDLED;
}
@@ -1376,12 +1581,15 @@
{
struct mvs_info *mvi = opaque;
+#ifndef MVS_USE_TASKLET
spin_lock(&mvi->lock);
mvs_int_rx(mvi, true);
spin_unlock(&mvi->lock);
-
+#else
+ tasklet_schedule(&mvi->tasklet);
+#endif
return IRQ_HANDLED;
}
#endif
@@ -1576,15 +1784,19 @@
return MVS_ID_NOT_MAPPED;
}
-static u32 mvs_get_ncq_tag(struct sas_task *task)
+static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
{
- u32 tag = 0;
struct ata_queued_cmd *qc = task->uldd_task;
- if (qc)
- tag = qc->tag;
+ if (qc) {
+ if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+ qc->tf.command == ATA_CMD_FPDMA_READ) {
+ *tag = qc->tag;
+ return 1;
+ }
+ }
- return tag;
+ return 0;
}
static int mvs_task_prep_ata(struct mvs_info *mvi,
@@ -1628,11 +1840,9 @@
hdr->flags = cpu_to_le32(flags);
/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
- if (task->ata_task.use_ncq) {
- hdr->tags = cpu_to_le32(mvs_get_ncq_tag(task));
- /*Fill in task file */
- task->ata_task.fis.sector_count = hdr->tags << 3;
- } else
+ if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags))
+ task->ata_task.fis.sector_count |= hdr->tags << 3;
+ else
hdr->tags = cpu_to_le32(tag);
hdr->data_len = cpu_to_le32(task->total_xfer_len);
@@ -1725,13 +1935,16 @@
u32 flags;
u32 resp_len, req_len, i, tag = tei->tag;
const u32 max_resp_len = SB_RFB_MAX;
+ u8 phy_mask;
slot = &mvi->slot_info[tag];
+ phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+ task->dev->port->phy_mask;
slot->tx = mvi->tx_prod;
mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
- (port->wide_port_phymap << TXQ_PHY_SHIFT));
+ (phy_mask << TXQ_PHY_SHIFT));
flags = MCH_RETRY;
if (task->ssp_task.enable_first_burst) {
@@ -1832,22 +2045,32 @@
void __iomem *regs = mvi->regs;
struct mvs_task_exec_info tei;
struct sas_task *t = task;
+ struct mvs_slot_info *slot;
u32 tag = 0xdeadbeef, rc, n_elem = 0;
unsigned long flags;
u32 n = num, pass = 0;
spin_lock_irqsave(&mvi->lock, flags);
-
do {
+ dev = t->dev;
tei.port = &mvi->port[dev->port->id];
if (!tei.port->port_attached) {
- struct task_status_struct *ts = &t->task_status;
- ts->stat = SAS_PHY_DOWN;
- t->task_done(t);
- rc = 0;
- goto exec_exit;
+ if (sas_protocol_ata(t->task_proto)) {
+ rc = SAS_PHY_DOWN;
+ goto out_done;
+ } else {
+ struct task_status_struct *ts = &t->task_status;
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ t->task_done(t);
+ if (n > 1)
+ t = list_entry(t->list.next,
+ struct sas_task, list);
+ continue;
+ }
}
+
if (!sas_protocol_ata(t->task_proto)) {
if (t->num_scatter) {
n_elem = pci_map_sg(mvi->pdev, t->scatter,
@@ -1866,9 +2089,10 @@
if (rc)
goto err_out;
- mvi->slot_info[tag].task = t;
- mvi->slot_info[tag].n_elem = n_elem;
- memset(mvi->slot_info[tag].buf, 0, MVS_SLOT_BUF_SZ);
+ slot = &mvi->slot_info[tag];
+ t->lldd_task = NULL;
+ slot->n_elem = n_elem;
+ memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
tei.task = t;
tei.hdr = &mvi->slot[tag];
tei.tag = tag;
@@ -1897,28 +2121,26 @@
if (rc)
goto err_out_tag;
+ slot->task = t;
+ slot->port = tei.port;
+ t->lldd_task = (void *) slot;
+ list_add_tail(&slot->list, &slot->port->list);
/* TODO: select normal or high priority */
spin_lock(&t->task_state_lock);
t->task_state_flags |= SAS_TASK_AT_INITIATOR;
spin_unlock(&t->task_state_lock);
- if (n == 1) {
- spin_unlock_irqrestore(&mvi->lock, flags);
- mw32(TX_PROD_IDX, mvi->tx_prod);
- }
mvs_hba_memory_dump(mvi, tag, t->task_proto);
++pass;
mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-
- if (n == 1)
- break;
-
- t = list_entry(t->list.next, struct sas_task, list);
+ if (n > 1)
+ t = list_entry(t->list.next, struct sas_task, list);
} while (--n);
- return 0;
+ rc = 0;
+ goto out_done;
err_out_tag:
mvs_tag_free(mvi, tag);
@@ -1928,7 +2150,7 @@
if (n_elem)
pci_unmap_sg(mvi->pdev, t->scatter, n_elem,
t->data_dir);
-exec_exit:
+out_done:
if (pass)
mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
spin_unlock_irqrestore(&mvi->lock, flags);
@@ -1937,42 +2159,59 @@
static int mvs_task_abort(struct sas_task *task)
{
- int rc = 1;
+ int rc;
unsigned long flags;
struct mvs_info *mvi = task->dev->port->ha->lldd_ha;
struct pci_dev *pdev = mvi->pdev;
+ int tag;
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
rc = TMF_RESP_FUNC_COMPLETE;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
goto out_done;
}
spin_unlock_irqrestore(&task->task_state_lock, flags);
- /*FIXME*/
- rc = TMF_RESP_FUNC_COMPLETE;
-
switch (task->task_proto) {
case SAS_PROTOCOL_SMP:
- dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! ");
+ dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! \n");
break;
case SAS_PROTOCOL_SSP:
- dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! ");
+ dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! \n");
break;
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:{
- dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! "
- "Dump D2H FIS: \n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! \n");
+#if _MV_DUMP
+ dev_printk(KERN_DEBUG, &pdev->dev, "Dump D2H FIS: \n");
mvs_hexdump(sizeof(struct host_to_dev_fis),
(void *)&task->ata_task.fis, 0);
dev_printk(KERN_DEBUG, &pdev->dev, "Dump ATAPI Cmd : \n");
mvs_hexdump(16, task->ata_task.atapi_packet, 0);
+#endif
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) {
+ /* TODO */
+ ;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
break;
}
default:
break;
}
+
+ if (mvs_find_tag(mvi, task, &tag)) {
+ spin_lock_irqsave(&mvi->lock, flags);
+ mvs_slot_task_free(mvi, task, &mvi->slot_info[tag], tag);
+ spin_unlock_irqrestore(&mvi->lock, flags);
+ }
+ if (!mvs_task_exec(task, 1, GFP_ATOMIC))
+ rc = TMF_RESP_FUNC_COMPLETE;
+ else
+ rc = TMF_RESP_FUNC_FAILED;
out_done:
return rc;
}
@@ -2001,7 +2240,7 @@
mvi->rx_fis, mvi->rx_fis_dma);
if (mvi->rx)
dma_free_coherent(&mvi->pdev->dev,
- sizeof(*mvi->rx) * MVS_RX_RING_SZ,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
mvi->rx, mvi->rx_dma);
if (mvi->slot)
dma_free_coherent(&mvi->pdev->dev,
@@ -2109,6 +2348,9 @@
return NULL;
spin_lock_init(&mvi->lock);
+#ifdef MVS_USE_TASKLET
+ tasklet_init(&mvi->tasklet, mvs_tasklet, (unsigned long)mvi);
+#endif
mvi->pdev = pdev;
mvi->chip = chip;
@@ -2132,6 +2374,10 @@
mvs_phy_init(mvi, i);
arr_phy[i] = &mvi->phy[i].sas_phy;
arr_port[i] = &mvi->port[i].sas_port;
+ mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED;
+ mvi->port[i].wide_port_phymap = 0;
+ mvi->port[i].port_attached = 0;
+ INIT_LIST_HEAD(&mvi->port[i].list);
}
SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
@@ -2148,9 +2394,10 @@
mvi->sas.sas_phy = arr_phy;
mvi->sas.sas_port = arr_port;
mvi->sas.num_phys = chip->n_phy;
- mvi->sas.lldd_max_execute_num = MVS_CHIP_SLOT_SZ - 1;
+ mvi->sas.lldd_max_execute_num = 1;
mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE;
- mvi->can_queue = (MVS_CHIP_SLOT_SZ >> 1) - 1;
+ mvi->shost->can_queue = MVS_CAN_QUEUE;
+ mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys;
mvi->sas.lldd_ha = mvi;
mvi->sas.core.shost = mvi->shost;
@@ -2203,11 +2450,11 @@
memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
mvi->rx = dma_alloc_coherent(&pdev->dev,
- sizeof(*mvi->rx) * MVS_RX_RING_SZ,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
&mvi->rx_dma, GFP_KERNEL);
if (!mvi->rx)
goto err_out;
- memset(mvi->rx, 0, sizeof(*mvi->rx) * MVS_RX_RING_SZ);
+ memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
mvi->rx[0] = cpu_to_le32(0xfff);
mvi->rx_cons = 0xfff;
@@ -2357,7 +2604,7 @@
mvs_cw32(regs, CMD_SAS_CTL0, tmp);
/* workaround for WDTIMEOUT , set to 550 ms */
- mvs_cw32(regs, CMD_WD_TIMER, 0xffffff);
+ mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
/* not to halt for different port op during wideport link change */
mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
@@ -2465,17 +2712,16 @@
{
u32 tmp;
struct mvs_phy *phy = &mvi->phy[i];
- struct mvs_port *port;
+ struct mvs_port *port = phy->port;;
tmp = mvs_read_phy_ctl(mvi, i);
if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
- if (!phy->port)
+ if (!port)
phy->phy_attached = 1;
return tmp;
}
- port = phy->port;
if (port) {
if (phy->phy_type & PORT_TYPE_SAS) {
port->wide_port_phymap &= ~(1U << i);
@@ -2497,7 +2743,7 @@
{
struct mvs_phy *phy = &mvi->phy[i];
struct pci_dev *pdev = mvi->pdev;
- u32 tmp, j;
+ u32 tmp;
u64 tmp64;
mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
@@ -2524,46 +2770,20 @@
sas_phy->linkrate =
(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
-
- /* Updated attached_sas_addr */
- mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
- phy->att_dev_sas_addr =
- (u64) mvs_read_port_cfg_data(mvi, i) << 32;
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
- phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-
- dev_printk(KERN_DEBUG, &pdev->dev,
- "phy[%d] Get Attached Address 0x%llX ,"
- " SAS Address 0x%llX\n",
- i, phy->att_dev_sas_addr, phy->dev_sas_addr);
- dev_printk(KERN_DEBUG, &pdev->dev,
- "Rate = %x , type = %d\n",
- sas_phy->linkrate, phy->phy_type);
-
-#if 1
- /*
- * If the device is capable of supporting a wide port
- * on its phys, it may configure the phys as a wide port.
- */
- if (phy->phy_type & PORT_TYPE_SAS)
- for (j = 0; j < mvi->chip->n_phy && j != i; ++j) {
- if ((mvi->phy[j].phy_attached) &&
- (mvi->phy[j].phy_type & PORT_TYPE_SAS))
- if (phy->att_dev_sas_addr ==
- mvi->phy[j].att_dev_sas_addr - 1) {
- phy->att_dev_sas_addr =
- mvi->phy[j].att_dev_sas_addr;
- break;
- }
- }
-
-#endif
-
- tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
- memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+ phy->minimum_linkrate =
+ (phy->phy_status &
+ PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+ phy->maximum_linkrate =
+ (phy->phy_status &
+ PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
if (phy->phy_type & PORT_TYPE_SAS) {
+ /* Updated attached_sas_addr */
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
+ phy->att_dev_sas_addr =
+ (u64) mvs_read_port_cfg_data(mvi, i) << 32;
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
+ phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
phy->identify.device_type =
@@ -2582,6 +2802,7 @@
} else if (phy->phy_type & PORT_TYPE_SATA) {
phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
if (mvs_is_sig_fis_received(phy->irq_status)) {
+ phy->att_dev_sas_addr = i; /* temp */
if (phy_st & PHY_OOB_DTCTD)
sas_phy->oob_mode = SATA_OOB_MODE;
phy->frame_rcvd_size =
@@ -2591,20 +2812,34 @@
} else {
dev_printk(KERN_DEBUG, &pdev->dev,
"No sig fis\n");
+ phy->phy_type &= ~(PORT_TYPE_SATA);
+ goto out_done;
}
}
+ tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
+ memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "phy[%d] Get Attached Address 0x%llX ,"
+ " SAS Address 0x%llX\n",
+ i, phy->att_dev_sas_addr, phy->dev_sas_addr);
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "Rate = %x , type = %d\n",
+ sas_phy->linkrate, phy->phy_type);
+
/* workaround for HW phy decoding error on 1.5g disk drive */
mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
tmp = mvs_read_port_vsr_data(mvi, i);
if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
SAS_LINK_RATE_1_5_GBPS)
- tmp &= ~PHY_MODE6_DTL_SPEED;
+ tmp &= ~PHY_MODE6_LATECLK;
else
- tmp |= PHY_MODE6_DTL_SPEED;
+ tmp |= PHY_MODE6_LATECLK;
mvs_write_port_vsr_data(mvi, i, tmp);
}
+out_done:
if (get_st)
mvs_write_port_irq_stat(mvi, i, phy->irq_status);
}
@@ -2629,6 +2864,11 @@
spin_unlock_irqrestore(&mvi->lock, flags);
}
+static int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
static int __devinit mvs_hw_init(struct mvs_info *mvi)
{
void __iomem *regs = mvi->regs;
@@ -2790,13 +3030,12 @@
/* enable CMD/CMPL_Q/RESP mode */
mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
- /* re-enable interrupts globally */
- mvs_hba_interrupt_enable(mvi);
-
/* enable completion queue interrupt */
- tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM);
+ tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
mw32(INT_MASK, tmp);
+ /* Enable SRS interrupt */
+ mw32(INT_MASK_SRS, 0xFF);
return 0;
}
@@ -2870,6 +3109,8 @@
mvs_print_info(mvi);
+ mvs_hba_interrupt_enable(mvi);
+
scsi_scan_host(mvi->shost);
return 0;
@@ -2915,12 +3156,22 @@
.lldd_execute_task = mvs_task_exec,
.lldd_control_phy = mvs_phy_control,
.lldd_abort_task = mvs_task_abort,
- .lldd_port_formed = mvs_port_formed
+ .lldd_port_formed = mvs_port_formed,
+ .lldd_I_T_nexus_reset = mvs_I_T_nexus_reset,
};
static struct pci_device_id __devinitdata mvs_pci_table[] = {
{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+ {
+ .vendor = PCI_VENDOR_ID_MARVELL,
+ .device = 0x6440,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = 0x6480,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = chip_6480,
+ },
{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
{ PCI_VDEVICE(MARVELL, 0x6480), chip_6480 },
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index e5c6f6a..c78b836 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -181,6 +181,18 @@
cmd = kmem_cache_alloc(shost->cmd_pool->cmd_slab,
gfp_mask | shost->cmd_pool->gfp_mask);
+ if (likely(cmd)) {
+ buf = kmem_cache_alloc(shost->cmd_pool->sense_slab,
+ gfp_mask | shost->cmd_pool->gfp_mask);
+ if (likely(buf)) {
+ memset(cmd, 0, sizeof(*cmd));
+ cmd->sense_buffer = buf;
+ } else {
+ kmem_cache_free(shost->cmd_pool->cmd_slab, cmd);
+ cmd = NULL;
+ }
+ }
+
if (unlikely(!cmd)) {
unsigned long flags;
@@ -197,16 +209,6 @@
memset(cmd, 0, sizeof(*cmd));
cmd->sense_buffer = buf;
}
- } else {
- buf = kmem_cache_alloc(shost->cmd_pool->sense_slab,
- gfp_mask | shost->cmd_pool->gfp_mask);
- if (likely(buf)) {
- memset(cmd, 0, sizeof(*cmd));
- cmd->sense_buffer = buf;
- } else {
- kmem_cache_free(shost->cmd_pool->cmd_slab, cmd);
- cmd = NULL;
- }
}
return cmd;
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index b9b09a7..ed83cdb 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -294,7 +294,6 @@
}
if (sdev->request_queue) {
- bsg_unregister_queue(sdev->request_queue);
sdev->request_queue->queuedata = NULL;
/* user context needed to free queue */
scsi_free_queue(sdev->request_queue);
@@ -858,6 +857,7 @@
if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
return;
+ bsg_unregister_queue(sdev->request_queue);
class_device_unregister(&sdev->sdev_classdev);
transport_remove_device(dev);
device_del(dev);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 77f7a7f..96a585e 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1740,6 +1740,60 @@
}
}
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial8250_get_poll_char(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned char lsr = serial_inp(up, UART_LSR);
+
+ while (!(lsr & UART_LSR_DR))
+ lsr = serial_inp(up, UART_LSR);
+
+ return serial_inp(up, UART_RX);
+}
+
+
+static void serial8250_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ unsigned int ier;
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+ if (up->capabilities & UART_CAP_UUE)
+ serial_out(up, UART_IER, UART_IER_UUE);
+ else
+ serial_out(up, UART_IER, 0);
+
+ wait_for_xmitr(up, BOTH_EMPTY);
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ serial_out(up, UART_TX, c);
+ if (c == 10) {
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_out(up, UART_TX, 13);
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_out(up, UART_IER, ier);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
static int serial8250_startup(struct uart_port *port)
{
struct uart_8250_port *up = (struct uart_8250_port *)port;
@@ -2386,6 +2440,10 @@
.request_port = serial8250_request_port,
.config_port = serial8250_config_port,
.verify_port = serial8250_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = serial8250_get_poll_char,
+ .poll_put_char = serial8250_put_poll_char,
+#endif
};
static struct uart_8250_port serial8250_ports[UART_NR];
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index cf627cd..f7cd950 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -961,6 +961,9 @@
config SERIAL_CORE_CONSOLE
bool
+config CONSOLE_POLL
+ bool
+
config SERIAL_68328
bool "68328 serial support"
depends on M68328 || M68EZ328 || M68VZ328
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 640cfe4..3cbea54 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -66,4 +66,5 @@
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 40604a0..08adc1d 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -314,6 +314,32 @@
spin_unlock_irqrestore(&uap->port.lock, flags);
}
+#ifdef CONFIG_CONSOLE_POLL
+static int pl010_get_poll_char(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int status;
+
+ do {
+ status = readw(uap->port.membase + UART01x_FR);
+ } while (status & UART01x_FR_RXFE);
+
+ return readw(uap->port.membase + UART01x_DR);
+}
+
+static void pl010_put_poll_char(struct uart_port *port,
+ unsigned char ch)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+ barrier();
+
+ writew(ch, uap->port.membase + UART01x_DR);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
static int pl011_startup(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -572,6 +598,10 @@
.request_port = pl010_request_port,
.config_port = pl010_config_port,
.verify_port = pl010_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = pl010_get_poll_char,
+ .poll_put_char = pl010_put_poll_char,
+#endif
};
static struct uart_amba_port *amba_ports[UART_NR];
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index d57bf3e..55492fa 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -96,6 +96,7 @@
/* PDC registers */
#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
@@ -106,6 +107,7 @@
#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
static int (*atmel_open_hook)(struct uart_port *);
static void (*atmel_close_hook)(struct uart_port *);
@@ -562,17 +564,22 @@
struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
int count;
+ /* nothing left to transmit? */
+ if (UART_GET_TCR(port))
+ return;
+
xmit->tail += pdc->ofs;
xmit->tail &= UART_XMIT_SIZE - 1;
port->icount.tx += pdc->ofs;
pdc->ofs = 0;
- if (!uart_circ_empty(xmit)) {
- /* more to transmit - setup next transfer */
+ /* more to transmit - setup next transfer */
- /* disable PDC transmit */
- UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+ /* disable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
+ if (!uart_circ_empty(xmit)) {
dma_sync_single_for_device(port->dev,
pdc->dma_addr,
pdc->dma_size,
@@ -586,11 +593,6 @@
/* re-enable PDC transmit and interrupts */
UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
- } else {
- /* nothing left to transmit - disable the transmitter */
-
- /* disable PDC transmit */
- UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1274,6 +1276,7 @@
{
struct uart_port *port = &atmel_ports[co->index].uart;
unsigned int status, imr;
+ unsigned int pdc_tx;
/*
* First, save IMR and then disable interrupts
@@ -1281,6 +1284,10 @@
imr = UART_GET_IMR(port);
UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
+ /* Store PDC transmit status and disable it */
+ pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
uart_console_write(port, s, count, atmel_console_putchar);
/*
@@ -1290,6 +1297,11 @@
do {
status = UART_GET_CSR(port);
} while (!(status & ATMEL_US_TXRDY));
+
+ /* Restore PDC transmit status */
+ if (pdc_tx)
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+
/* set interrupts back the way they were */
UART_PUT_IER(port, imr);
}
@@ -1565,3 +1577,4 @@
MODULE_AUTHOR("Rick Bronson");
MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_usart");
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 0aa345b..46bb47f 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -1243,6 +1243,7 @@
.resume = bfin_serial_resume,
.driver = {
.name = "bfin-uart",
+ .owner = THIS_MODULE,
},
};
@@ -1301,3 +1302,4 @@
MODULE_DESCRIPTION("Blackfin generic serial port driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR);
+MODULE_ALIAS("platform:bfin-uart");
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 56af1f5..16ba9ac 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1090,6 +1090,7 @@
.resume = serial_imx_resume,
.driver = {
.name = "imx-uart",
+ .owner = THIS_MODULE,
},
};
@@ -1124,3 +1125,4 @@
MODULE_AUTHOR("Sascha Hauer");
MODULE_DESCRIPTION("IMX generic serial port driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:imx-uart");
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
new file mode 100644
index 0000000..9cf0332
--- /dev/null
+++ b/drivers/serial/kgdboc.c
@@ -0,0 +1,168 @@
+/*
+ * Based on the same principle as kgdboe using the NETPOLL api, this
+ * driver uses a console polling api to implement a gdb serial inteface
+ * which is multiplexed on a console port.
+ *
+ * Maintainer: Jason Wessel <jason.wessel@windriver.com>
+ *
+ * 2007-2008 (c) Jason Wessel - Wind River Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/kgdb.h>
+#include <linux/tty.h>
+
+#define MAX_CONFIG_LEN 40
+
+static struct kgdb_io kgdboc_io_ops;
+
+/* -1 = init not run yet, 0 = unconfigured, 1 = configured. */
+static int configured = -1;
+
+static char config[MAX_CONFIG_LEN];
+static struct kparam_string kps = {
+ .string = config,
+ .maxlen = MAX_CONFIG_LEN,
+};
+
+static struct tty_driver *kgdb_tty_driver;
+static int kgdb_tty_line;
+
+static int kgdboc_option_setup(char *opt)
+{
+ if (strlen(opt) > MAX_CONFIG_LEN) {
+ printk(KERN_ERR "kgdboc: config string too long\n");
+ return -ENOSPC;
+ }
+ strcpy(config, opt);
+
+ return 0;
+}
+
+__setup("kgdboc=", kgdboc_option_setup);
+
+static int configure_kgdboc(void)
+{
+ struct tty_driver *p;
+ int tty_line = 0;
+ int err;
+
+ err = kgdboc_option_setup(config);
+ if (err || !strlen(config) || isspace(config[0]))
+ goto noconfig;
+
+ err = -ENODEV;
+
+ p = tty_find_polling_driver(config, &tty_line);
+ if (!p)
+ goto noconfig;
+
+ kgdb_tty_driver = p;
+ kgdb_tty_line = tty_line;
+
+ err = kgdb_register_io_module(&kgdboc_io_ops);
+ if (err)
+ goto noconfig;
+
+ configured = 1;
+
+ return 0;
+
+noconfig:
+ config[0] = 0;
+ configured = 0;
+
+ return err;
+}
+
+static int __init init_kgdboc(void)
+{
+ /* Already configured? */
+ if (configured == 1)
+ return 0;
+
+ return configure_kgdboc();
+}
+
+static void cleanup_kgdboc(void)
+{
+ if (configured == 1)
+ kgdb_unregister_io_module(&kgdboc_io_ops);
+}
+
+static int kgdboc_get_char(void)
+{
+ return kgdb_tty_driver->poll_get_char(kgdb_tty_driver, kgdb_tty_line);
+}
+
+static void kgdboc_put_char(u8 chr)
+{
+ kgdb_tty_driver->poll_put_char(kgdb_tty_driver, kgdb_tty_line, chr);
+}
+
+static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp)
+{
+ int len = strlen(kmessage);
+
+ if (len >= MAX_CONFIG_LEN) {
+ printk(KERN_ERR "kgdboc: config string too long\n");
+ return -ENOSPC;
+ }
+
+ /* Only copy in the string if the init function has not run yet */
+ if (configured < 0) {
+ strcpy(config, kmessage);
+ return 0;
+ }
+
+ if (kgdb_connected) {
+ printk(KERN_ERR
+ "kgdboc: Cannot reconfigure while KGDB is connected.\n");
+
+ return -EBUSY;
+ }
+
+ strcpy(config, kmessage);
+ /* Chop out \n char as a result of echo */
+ if (config[len - 1] == '\n')
+ config[len - 1] = '\0';
+
+ if (configured == 1)
+ cleanup_kgdboc();
+
+ /* Go and configure with the new params. */
+ return configure_kgdboc();
+}
+
+static void kgdboc_pre_exp_handler(void)
+{
+ /* Increment the module count when the debugger is active */
+ if (!kgdb_connected)
+ try_module_get(THIS_MODULE);
+}
+
+static void kgdboc_post_exp_handler(void)
+{
+ /* decrement the module count when the debugger detaches */
+ if (!kgdb_connected)
+ module_put(THIS_MODULE);
+}
+
+static struct kgdb_io kgdboc_io_ops = {
+ .name = "kgdboc",
+ .read_char = kgdboc_get_char,
+ .write_char = kgdboc_put_char,
+ .pre_exception = kgdboc_pre_exp_handler,
+ .post_exception = kgdboc_post_exp_handler,
+};
+
+module_init(init_kgdboc);
+module_exit(cleanup_kgdboc);
+module_param_call(kgdboc, param_set_kgdboc_var, param_get_string, &kps, 0644);
+MODULE_PARM_DESC(kgdboc, "<serial_device>[,baud]");
+MODULE_DESCRIPTION("KGDB Console TTY Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index e76fc72..7e164e0 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -649,5 +649,6 @@
MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>");
MODULE_DESCRIPTION("Freescale ColdFire UART driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mcfuart");
/****************************************************************************/
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index a638f23..d93b357 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -1188,6 +1188,8 @@
}
#endif
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:mpc52xx-psc");
static struct platform_driver mpc52xx_uart_platform_driver = {
.probe = mpc52xx_uart_probe,
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
index cb3a919..e8819c4 100644
--- a/drivers/serial/mpsc.c
+++ b/drivers/serial/mpsc.c
@@ -1964,6 +1964,7 @@
.remove = mpsc_drv_remove,
.driver = {
.name = MPSC_CTLR_NAME,
+ .owner = THIS_MODULE,
},
};
@@ -2007,3 +2008,4 @@
MODULE_VERSION(MPSC_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
+MODULE_ALIAS("platform:" MPSC_CTLR_NAME);
diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c
index b56f7db..3123ffe 100644
--- a/drivers/serial/netx-serial.c
+++ b/drivers/serial/netx-serial.c
@@ -713,6 +713,7 @@
.driver = {
.name = DRIVER_NAME,
+ .owner = THIS_MODULE,
},
};
@@ -745,3 +746,4 @@
MODULE_AUTHOR("Sascha Hauer");
MODULE_DESCRIPTION("NetX serial port driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 8d01c59..d0e5a79 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -850,3 +850,4 @@
MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR);
+MODULE_ALIAS("platform:pnx8xxx-uart");
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 352fcb8..b4f7ffb 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -833,6 +833,7 @@
.resume = serial_pxa_resume,
.driver = {
.name = "pxa2xx-uart",
+ .owner = THIS_MODULE,
},
};
@@ -861,4 +862,4 @@
module_exit(serial_pxa_exit);
MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("platform:pxa2xx-uart");
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 45de193..4ffa258 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1935,3 +1935,7 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("Samsung S3C2410/S3C2440/S3C2412 Serial port driver");
+MODULE_ALIAS("platform:s3c2400-uart");
+MODULE_ALIAS("platform:s3c2410-uart");
+MODULE_ALIAS("platform:s3c2412-uart");
+MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 58a83c2..67b2338 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -884,6 +884,7 @@
.resume = sa1100_serial_resume,
.driver = {
.name = "sa11x0-uart",
+ .owner = THIS_MODULE,
},
};
@@ -917,3 +918,4 @@
MODULE_DESCRIPTION("SA1100 generic serial port driver $Revision: 1.50 $");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR);
+MODULE_ALIAS("platform:sa11x0-uart");
diff --git a/drivers/serial/sc26xx.c b/drivers/serial/sc26xx.c
index a350b6d..ae2a9e2 100644
--- a/drivers/serial/sc26xx.c
+++ b/drivers/serial/sc26xx.c
@@ -732,6 +732,7 @@
.remove = __devexit_p(sc26xx_driver_remove),
.driver = {
.name = "SC26xx",
+ .owner = THIS_MODULE,
},
};
@@ -753,3 +754,4 @@
MODULE_DESCRIPTION("SC681/SC2692 serial driver");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:SC26xx");
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 0f5a179..c32c1ca 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1771,7 +1771,7 @@
}
#endif
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
+#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
/*
* uart_console_write - write a console message to a serial port
* @port: the port to write the message
@@ -1827,7 +1827,7 @@
* options. The format of the string is <baud><parity><bits><flow>,
* eg: 115200n8r
*/
-void __init
+void
uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow)
{
char *s = options;
@@ -1842,6 +1842,7 @@
if (*s)
*flow = *s;
}
+EXPORT_SYMBOL_GPL(uart_parse_options);
struct baud_rates {
unsigned int rate;
@@ -1872,7 +1873,7 @@
* @bits: number of data bits
* @flow: flow control character - 'r' (rts)
*/
-int __init
+int
uart_set_options(struct uart_port *port, struct console *co,
int baud, int parity, int bits, int flow)
{
@@ -1924,10 +1925,16 @@
port->mctrl |= TIOCM_DTR;
port->ops->set_termios(port, &termios, &dummy);
- co->cflag = termios.c_cflag;
+ /*
+ * Allow the setting of the UART parameters with a NULL console
+ * too:
+ */
+ if (co)
+ co->cflag = termios.c_cflag;
return 0;
}
+EXPORT_SYMBOL_GPL(uart_set_options);
#endif /* CONFIG_SERIAL_CORE_CONSOLE */
static void uart_change_pm(struct uart_state *state, int pm_state)
@@ -2182,6 +2189,60 @@
}
}
+#ifdef CONFIG_CONSOLE_POLL
+
+static int uart_poll_init(struct tty_driver *driver, int line, char *options)
+{
+ struct uart_driver *drv = driver->driver_state;
+ struct uart_state *state = drv->state + line;
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (!state || !state->port)
+ return -1;
+
+ port = state->port;
+ if (!(port->ops->poll_get_char && port->ops->poll_put_char))
+ return -1;
+
+ if (options) {
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ return uart_set_options(port, NULL, baud, parity, bits, flow);
+ }
+
+ return 0;
+}
+
+static int uart_poll_get_char(struct tty_driver *driver, int line)
+{
+ struct uart_driver *drv = driver->driver_state;
+ struct uart_state *state = drv->state + line;
+ struct uart_port *port;
+
+ if (!state || !state->port)
+ return -1;
+
+ port = state->port;
+ return port->ops->poll_get_char(port);
+}
+
+static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
+{
+ struct uart_driver *drv = driver->driver_state;
+ struct uart_state *state = drv->state + line;
+ struct uart_port *port;
+
+ if (!state || !state->port)
+ return;
+
+ port = state->port;
+ port->ops->poll_put_char(port, ch);
+}
+#endif
+
static const struct tty_operations uart_ops = {
.open = uart_open,
.close = uart_close,
@@ -2206,6 +2267,11 @@
#endif
.tiocmget = uart_tiocmget,
.tiocmset = uart_tiocmset,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_init = uart_poll_init,
+ .poll_get_char = uart_poll_get_char,
+ .poll_put_char = uart_poll_put_char,
+#endif
};
/**
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 9d244d1..eff5930 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -1552,3 +1552,4 @@
module_exit(sci_exit);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sh-sci");
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index 4e06ab6..b565d5a 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -561,6 +561,9 @@
return ulite_release(&pdev->dev);
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:uartlite");
+
static struct platform_driver ulite_platform_driver = {
.probe = ulite_probe,
.remove = __devexit_p(ulite_remove),
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 6fd51b0..98ab649 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -960,3 +960,6 @@
module_init(vr41xx_siu_init);
module_exit(vr41xx_siu_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:SIU");
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 85687aa..1749a27 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -863,3 +863,4 @@
MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_spi");
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 41a3d00..072c4a5 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -958,6 +958,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:au1550-spi");
+
static struct platform_driver au1550_spi_drv = {
.remove = __exit_p(au1550_spi_remove),
.driver = {
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index a86315a..9072946 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -500,6 +500,9 @@
return mpc52xx_psc_spi_do_remove(&dev->dev);
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:mpc52xx-psc-spi");
+
static struct platform_driver mpc52xx_psc_spi_platform_driver = {
.remove = __exit_p(mpc52xx_psc_spi_remove),
.driver = {
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index a6ba11a..b1cc148 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -1084,6 +1084,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:omap2_mcspi");
+
static struct platform_driver omap2_mcspi_driver = {
.driver = {
.name = "omap2_mcspi",
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index 8245b51..5f00bd6 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -537,10 +537,12 @@
return status;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:omap_uwire");
+
static struct platform_driver uwire_driver = {
.driver = {
.name = "omap_uwire",
- .bus = &platform_bus_type,
.owner = THIS_MODULE,
},
.remove = __exit_p(uwire_remove),
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 59deed7..147e26a 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -44,6 +44,7 @@
MODULE_AUTHOR("Stephen Street");
MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-spi");
#define MAX_BUSES 3
@@ -1581,7 +1582,6 @@
static struct platform_driver driver = {
.driver = {
.name = "pxa2xx-spi",
- .bus = &platform_bus_type,
.owner = THIS_MODULE,
},
.remove = pxa2xx_spi_remove,
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index d853fceb..a9ac1fd 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -713,8 +713,8 @@
} else {
drv_data->len = transfer->len;
}
- dev_dbg(&drv_data->pdev->dev, "transfer: ",
- "drv_data->write is %p, chip->write is %p, null_wr is %p\n",
+ dev_dbg(&drv_data->pdev->dev,
+ "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n",
drv_data->write, chip->write, null_writer);
/* speed and width has been set on per message */
@@ -1294,6 +1294,12 @@
goto out_error_queue_alloc;
}
+ status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
+ if (status != 0) {
+ dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
+ goto out_error_queue_alloc;
+ }
+
/* Register with the SPI framework */
platform_set_drvdata(pdev, drv_data);
status = spi_register_master(master);
@@ -1302,12 +1308,6 @@
goto out_error_queue_alloc;
}
- status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
- if (status != 0) {
- dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
- goto out_error;
- }
-
dev_info(dev, "%s, Version %s, regs_base@%p, dma channel@%d\n",
DRV_DESC, DRV_VERSION, drv_data->regs_base,
drv_data->dma_channel);
@@ -1319,7 +1319,6 @@
iounmap((void *) drv_data->regs_base);
out_error_ioremap:
out_error_get_res:
-out_error:
spi_master_put(master);
return status;
@@ -1397,7 +1396,7 @@
#define bfin5xx_spi_resume NULL
#endif /* CONFIG_PM */
-MODULE_ALIAS("bfin-spi-master"); /* for platform bus hotplug */
+MODULE_ALIAS("platform:bfin-spi");
static struct platform_driver bfin5xx_spi_driver = {
.driver = {
.name = DRV_NAME,
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 1b06471..d4ba640 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -1722,10 +1722,12 @@
#define spi_imx_resume NULL
#endif /* CONFIG_PM */
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:spi_imx");
+
static struct platform_driver driver = {
.driver = {
.name = "spi_imx",
- .bus = &platform_bus_type,
.owner = THIS_MODULE,
},
.remove = __exit_p(spi_imx_remove),
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 04f7cd9..be15a62 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -523,11 +523,12 @@
return 0;
}
-MODULE_ALIAS("mpc83xx_spi"); /* for platform bus hotplug */
+MODULE_ALIAS("platform:mpc83xx_spi");
static struct platform_driver mpc83xx_spi_driver = {
.remove = __exit_p(mpc83xx_spi_remove),
.driver = {
- .name = "mpc83xx_spi",
+ .name = "mpc83xx_spi",
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
index 6e834b8..b7476b8 100644
--- a/drivers/spi/spi_s3c24xx.c
+++ b/drivers/spi/spi_s3c24xx.c
@@ -192,8 +192,11 @@
hw->len = t->len;
hw->count = 0;
+ init_completion(&hw->done);
+
/* send the first byte */
writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
+
wait_for_completion(&hw->done);
return hw->count;
@@ -235,6 +238,7 @@
static int __init s3c24xx_spi_probe(struct platform_device *pdev)
{
+ struct s3c2410_spi_info *pdata;
struct s3c24xx_spi *hw;
struct spi_master *master;
struct resource *res;
@@ -251,10 +255,10 @@
memset(hw, 0, sizeof(struct s3c24xx_spi));
hw->master = spi_master_get(master);
- hw->pdata = pdev->dev.platform_data;
+ hw->pdata = pdata = pdev->dev.platform_data;
hw->dev = &pdev->dev;
- if (hw->pdata == NULL) {
+ if (pdata == NULL) {
dev_err(&pdev->dev, "No platform data supplied\n");
err = -ENOENT;
goto err_no_pdata;
@@ -263,6 +267,10 @@
platform_set_drvdata(pdev, hw);
init_completion(&hw->done);
+ /* setup the master state. */
+
+ master->num_chipselect = hw->pdata->num_cs;
+
/* setup the state for the bitbang driver */
hw->bitbang.master = hw->master;
@@ -330,13 +338,13 @@
/* setup any gpio we can */
- if (!hw->pdata->set_cs) {
+ if (!pdata->set_cs) {
hw->set_cs = s3c24xx_spi_gpiocs;
- s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
- s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(pdata->pin_cs, 1);
+ s3c2410_gpio_cfgpin(pdata->pin_cs, S3C2410_GPIO_OUTPUT);
} else
- hw->set_cs = hw->pdata->set_cs;
+ hw->set_cs = pdata->set_cs;
/* register our spi controller */
@@ -415,7 +423,7 @@
#define s3c24xx_spi_resume NULL
#endif
-MODULE_ALIAS("s3c2410_spi"); /* for platform bus hotplug */
+MODULE_ALIAS("platform:s3c2410-spi");
static struct platform_driver s3c24xx_spidrv = {
.remove = __exit_p(s3c24xx_spi_remove),
.suspend = s3c24xx_spi_suspend,
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
index 82ae7d7..e33f614 100644
--- a/drivers/spi/spi_s3c24xx_gpio.c
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -168,6 +168,8 @@
#define s3c2410_spigpio_suspend NULL
#define s3c2410_spigpio_resume NULL
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:spi_s3c24xx_gpio");
static struct platform_driver s3c2410_spigpio_drv = {
.probe = s3c2410_spigpio_probe,
diff --git a/drivers/spi/spi_sh_sci.c b/drivers/spi/spi_sh_sci.c
index 3dbe71b..7d36720 100644
--- a/drivers/spi/spi_sh_sci.c
+++ b/drivers/spi/spi_sh_sci.c
@@ -203,3 +203,4 @@
MODULE_DESCRIPTION("SH SCI SPI Driver");
MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:spi_sh_sci");
diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c
index 363ac8e..2296f37 100644
--- a/drivers/spi/spi_txx9.c
+++ b/drivers/spi/spi_txx9.c
@@ -450,6 +450,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:spi_txx9");
+
static struct platform_driver txx9spi_driver = {
.remove = __exit_p(txx9spi_remove),
.driver = {
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 5d04f52..cf6aef3 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -408,6 +408,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:" XILINX_SPI_NAME);
+
static struct platform_driver xilinx_spi_driver = {
.probe = xilinx_spi_probe,
.remove = __devexit_p(xilinx_spi_remove),
diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c
index 3d3dd32..a9e7eb4 100644
--- a/drivers/ssb/driver_mipscore.c
+++ b/drivers/ssb/driver_mipscore.c
@@ -109,12 +109,13 @@
clear_irq(bus, oldirq);
/* assign the new one */
- if (irq == 0)
- ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
-
- irqflag <<= ipsflag_irq_shift[irq];
- irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
- ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ if (irq == 0) {
+ ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
+ } else {
+ irqflag <<= ipsflag_irq_shift[irq];
+ irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
+ ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ }
}
static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 74b9a8a..5d777f2 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -551,7 +551,7 @@
} else {
tmp = ssb_read32(dev, SSB_TPSFLAG);
tmp &= SSB_TPSFLAG_BPFLAG;
- intvec |= tmp;
+ intvec |= (1 << tmp);
}
ssb_write32(pdev, SSB_INTVEC, intvec);
}
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index bedb2b4..8003a9e 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -436,15 +436,18 @@
#ifdef CONFIG_SSB_PCIHOST
sdev->irq = bus->host_pci->irq;
dev->parent = &bus->host_pci->dev;
+ sdev->dma_dev = &bus->host_pci->dev;
#endif
break;
case SSB_BUSTYPE_PCMCIA:
#ifdef CONFIG_SSB_PCMCIAHOST
sdev->irq = bus->host_pcmcia->irq.AssignedIRQ;
dev->parent = &bus->host_pcmcia->dev;
+ sdev->dma_dev = &bus->host_pcmcia->dev;
#endif
break;
case SSB_BUSTYPE_SSB:
+ sdev->dma_dev = dev;
break;
}
@@ -1018,15 +1021,14 @@
int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask)
{
- struct device *dev = ssb_dev->dev;
+ struct device *dma_dev = ssb_dev->dma_dev;
#ifdef CONFIG_SSB_PCIHOST
- if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI &&
- !dma_supported(dev, mask))
- return -EIO;
+ if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI)
+ return dma_set_mask(dma_dev, mask);
#endif
- dev->coherent_dma_mask = mask;
- dev->dma_mask = &dev->coherent_dma_mask;
+ dma_dev->coherent_dma_mask = mask;
+ dma_dev->dma_mask = &dma_dev->coherent_dma_mask;
return 0;
}
@@ -1044,6 +1046,12 @@
goto out;
cc = &bus->chipco;
+
+ if (!cc->dev)
+ goto out;
+ if (cc->dev->id.revision < 5)
+ goto out;
+
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
if (err)
diff --git a/drivers/thermal/thermal.c b/drivers/thermal/thermal.c
index 8b86e53..7f79bbf 100644
--- a/drivers/thermal/thermal.c
+++ b/drivers/thermal/thermal.c
@@ -196,6 +196,10 @@
__ATTR(trip_point_8_temp, 0444, trip_point_temp_show, NULL),
__ATTR(trip_point_9_type, 0444, trip_point_type_show, NULL),
__ATTR(trip_point_9_temp, 0444, trip_point_temp_show, NULL),
+ __ATTR(trip_point_10_type, 0444, trip_point_type_show, NULL),
+ __ATTR(trip_point_10_temp, 0444, trip_point_temp_show, NULL),
+ __ATTR(trip_point_11_type, 0444, trip_point_type_show, NULL),
+ __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL),
};
#define TRIP_POINT_ATTR_ADD(_dev, _index, result) \
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index a83e8b7..fd15ced 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1884,3 +1884,4 @@
MODULE_DESCRIPTION("AT91 udc driver");
MODULE_AUTHOR("Thomas Rathbone, David Brownell");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_udc");
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index af8b2a3..b0db4c3 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2054,6 +2054,7 @@
.remove = __exit_p(usba_udc_remove),
.driver = {
.name = "atmel_usba_udc",
+ .owner = THIS_MODULE,
},
};
@@ -2072,3 +2073,4 @@
MODULE_DESCRIPTION("Atmel USBA UDC driver");
MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_usba_udc");
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 63e8fa3..254012a 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -2475,3 +2475,4 @@
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:fsl-usb2-udc");
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 37243ef..078f724 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -2146,3 +2146,4 @@
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Mikko Lahteenmaki, Bo Henriksen");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lh7a40x_udc");
diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
index 835948f..ee6b35f 100644
--- a/drivers/usb/gadget/m66592-udc.c
+++ b/drivers/usb/gadget/m66592-udc.c
@@ -35,6 +35,7 @@
MODULE_DESCRIPTION("M66592 USB gadget driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_ALIAS("platform:m66592_udc");
#define DRIVER_VERSION "18 Oct 2007"
@@ -1671,6 +1672,7 @@
.remove = __exit_p(m66592_remove),
.driver = {
.name = (char *) udc_name,
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index e6d68bd..ee1e9a3 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -3109,4 +3109,4 @@
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("platform:omap_udc");
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 096c41c..c00cd8b 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -2380,4 +2380,4 @@
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("platform:pxa2xx-udc");
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index aadc420..6b1ef48 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -2047,3 +2047,5 @@
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-usbgadget");
+MODULE_ALIAS("platform:s3c2440-usbgadget");
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 40e8240..4e065e5 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -135,8 +135,6 @@
hcd->state = HC_STATE_QUIESCING;
}
ehci->command = ehci_readl(ehci, &ehci->regs->command);
- if (ehci->reclaim)
- end_unlink_async(ehci);
ehci_work(ehci);
/* Unlike other USB host controller types, EHCI doesn't have
@@ -180,6 +178,9 @@
ehci_halt (ehci);
hcd->state = HC_STATE_SUSPENDED;
+ if (ehci->reclaim)
+ end_unlink_async(ehci);
+
/* allow remote wakeup */
mask = INTR_MASK;
if (!device_may_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index d7071c8..203a335 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1684,14 +1684,18 @@
#endif
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:isp116x-hcd");
+
static struct platform_driver isp116x_driver = {
.probe = isp116x_probe,
.remove = isp116x_remove,
.suspend = isp116x_suspend,
.resume = isp116x_resume,
.driver = {
- .name = (char *)hcd_name,
- },
+ .name = (char *)hcd_name,
+ .owner = THIS_MODULE,
+ },
};
/*-----------------------------------------------------------------*/
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 126fcbd..d72dc07 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -355,7 +355,7 @@
#define ohci_hcd_at91_drv_resume NULL
#endif
-MODULE_ALIAS("at91_ohci");
+MODULE_ALIAS("platform:at91_ohci");
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
@@ -368,4 +368,3 @@
.owner = THIS_MODULE,
},
};
-
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 663a060..f90fe0c 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -345,3 +345,4 @@
},
};
+MODULE_ALIAS("platform:au1xxx-ohci");
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index a68ce9d..156e93a 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -211,6 +211,8 @@
#endif
.driver = {
.name = "ep93xx-ohci",
+ .owner = THIS_MODULE,
},
};
+MODULE_ALIAS("platform:ep93xx-ohci");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index dd4798e..33f1c1c 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -467,7 +467,7 @@
out:
kfree(seen);
if (ohci->eds_scheduled)
- mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+ mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
done:
spin_unlock_irqrestore(&ohci->lock, flags);
}
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 4a043ab..13c12ed 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -251,3 +251,4 @@
},
};
+MODULE_ALIAS("platform:lh7a404-ohci");
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 74e1f4b..7bfca1e 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -544,3 +544,4 @@
},
};
+MODULE_ALIAS("platform:ohci");
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 6c52c66..28b458f 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -456,9 +456,13 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:usb-ohci");
+
static struct platform_driver usb_hcd_pnx4008_driver = {
.driver = {
.name = "usb-ohci",
+ .owner = THIS_MODULE,
},
.probe = usb_hcd_pnx4008_probe,
.remove = usb_hcd_pnx4008_remove,
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index 85fdfd2..605d59c 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -230,11 +230,12 @@
return 0;
}
-MODULE_ALIAS("pnx8550-ohci");
+MODULE_ALIAS("platform:pnx8550-ohci");
static struct platform_driver ohci_hcd_pnx8550_driver = {
.driver = {
- .name = "pnx8550-ohci",
+ .name = "pnx8550-ohci",
+ .owner = THIS_MODULE,
},
.probe = ohci_hcd_pnx8550_drv_probe,
.remove = ohci_hcd_pnx8550_drv_remove,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index f95be189..523c301 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -213,3 +213,4 @@
},
};
+MODULE_ALIAS("platform:ppc-soc-ohci");
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index ff9a798..8ad9b3b 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -364,6 +364,8 @@
}
#endif
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa27x-ohci");
static struct platform_driver ohci_hcd_pxa27x_driver = {
.probe = ohci_hcd_pxa27x_drv_probe,
@@ -375,6 +377,7 @@
#endif
.driver = {
.name = "pxa27x-ohci",
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 5181732..9c9f3b5 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -169,7 +169,7 @@
if (quirk_zfmicro(ohci)
&& (ed->type == PIPE_INTERRUPT)
&& !(ohci->eds_scheduled++))
- mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+ mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
wmb ();
/* we care about rm_list when setting CLE/BLE in case the HC was at
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 44b79e8..ead4772 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -501,3 +501,4 @@
},
};
+MODULE_ALIAS("platform:s3c2410-ohci");
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 5309ac0..e7ee607 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -141,3 +141,4 @@
},
};
+MODULE_ALIAS("platform:sh_ohci");
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index a970701..4ea9276 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -262,3 +262,4 @@
.name = "sm501-usb",
},
};
+MODULE_ALIAS("platform:sm501-usb");
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 0ce2fc5..9f80e52 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -44,6 +44,7 @@
MODULE_DESCRIPTION("R8A66597 USB Host Controller Driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_ALIAS("platform:r8a66597_hcd");
#define DRIVER_VERSION "29 May 2007"
@@ -2219,6 +2220,7 @@
.resume = r8a66597_resume,
.driver = {
.name = (char *) hcd_name,
+ .owner = THIS_MODULE,
},
};
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 59be276..629bca0 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -58,6 +58,7 @@
MODULE_DESCRIPTION("SL811HS USB Host Controller Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sl811-hcd");
#define DRIVER_VERSION "19 May 2005"
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 3033d69..8e117a7 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -3316,3 +3316,4 @@
module_exit(u132_hcd_exit);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:u132_hcd");
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index da922df..b6b5b2a 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -378,6 +378,7 @@
sg = kmalloc (nents * sizeof *sg, GFP_KERNEL);
if (!sg)
return NULL;
+ sg_init_table(sg, nents);
for (i = 0; i < nents; i++) {
char *buf;
@@ -390,7 +391,7 @@
}
/* kmalloc pages are always physically contiguous! */
- sg_init_one(&sg[i], buf, size);
+ sg_set_buf(&sg[i], buf, size);
switch (pattern) {
case 0:
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index f3ca660..324bb61 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -75,6 +75,7 @@
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 8a0d174..74ce8bc 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -637,6 +637,7 @@
.description = "Keyspan - (without firmware)",
.id_table = keyspan_pre_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
@@ -651,6 +652,7 @@
.description = "Keyspan 1 port adapter",
.id_table = keyspan_1port_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
@@ -678,6 +680,7 @@
.description = "Keyspan 2 port adapter",
.id_table = keyspan_2port_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 2,
@@ -705,6 +708,7 @@
.description = "Keyspan 4 port adapter",
.id_table = keyspan_4port_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 4,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a396fbb..d101025 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -109,6 +109,22 @@
#define HUAWEI_PRODUCT_E600 0x1001
#define HUAWEI_PRODUCT_E220 0x1003
#define HUAWEI_PRODUCT_E220BIS 0x1004
+#define HUAWEI_PRODUCT_E1401 0x1401
+#define HUAWEI_PRODUCT_E1403 0x1403
+#define HUAWEI_PRODUCT_E1405 0x1405
+#define HUAWEI_PRODUCT_E1406 0x1406
+#define HUAWEI_PRODUCT_E1408 0x1408
+#define HUAWEI_PRODUCT_E1409 0x1409
+#define HUAWEI_PRODUCT_E1410 0x1410
+#define HUAWEI_PRODUCT_E1411 0x1411
+#define HUAWEI_PRODUCT_E1412 0x1412
+#define HUAWEI_PRODUCT_E1413 0x1413
+#define HUAWEI_PRODUCT_E1414 0x1414
+#define HUAWEI_PRODUCT_E1415 0x1415
+#define HUAWEI_PRODUCT_E1416 0x1416
+#define HUAWEI_PRODUCT_E1417 0x1417
+#define HUAWEI_PRODUCT_E1418 0x1418
+#define HUAWEI_PRODUCT_E1419 0x1419
#define NOVATELWIRELESS_VENDOR_ID 0x1410
@@ -129,6 +145,7 @@
#define NOVATELWIRELESS_PRODUCT_EV620 0x2100
#define NOVATELWIRELESS_PRODUCT_ES720 0x2110
#define NOVATELWIRELESS_PRODUCT_E725 0x2120
+#define NOVATELWIRELESS_PRODUCT_ES620 0x2130
#define NOVATELWIRELESS_PRODUCT_EU730 0x2400
#define NOVATELWIRELESS_PRODUCT_EU740 0x2410
#define NOVATELWIRELESS_PRODUCT_EU870D 0x2420
@@ -137,6 +154,8 @@
#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
+#define NOVATELWIRELESS_PRODUCT_U727 0x5010
+
/* FUTURE NOVATEL PRODUCTS */
#define NOVATELWIRELESS_PRODUCT_EVDO_1 0x6000
#define NOVATELWIRELESS_PRODUCT_HSPA_1 0x7000
@@ -147,6 +166,12 @@
#define NOVATELWIRELESS_PRODUCT_EMBEDDED_2 0x8001
#define NOVATELWIRELESS_PRODUCT_GLOBAL_2 0x9001
+/* AMOI PRODUCTS */
+#define AMOI_VENDOR_ID 0x1614
+#define AMOI_PRODUCT_H01 0x0800
+#define AMOI_PRODUCT_H01A 0x7002
+#define AMOI_PRODUCT_H02 0x0802
+
#define DELL_VENDOR_ID 0x413C
#define KYOCERA_VENDOR_ID 0x0c88
@@ -163,8 +188,13 @@
#define BANDRICH_PRODUCT_C100_1 0x1002
#define BANDRICH_PRODUCT_C100_2 0x1003
+#define AMOI_VENDOR_ID 0x1614
+#define AMOI_PRODUCT_9508 0x0800
+
#define QUALCOMM_VENDOR_ID 0x05C6
+#define MAXON_VENDOR_ID 0x16d8
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -204,6 +234,23 @@
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419) },
+ { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */
@@ -216,13 +263,13 @@
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EV620) }, /* Novatel EV620/ES620 CDMA/EV-DO */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES720) }, /* Novatel ES620/ES720/U720/USB720 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E725) }, /* Novatel E725/E726 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES620) }, /* Novatel Merlin ES620 SM Bus */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU730) }, /* Novatel EU730 and Vodafone EU740 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU740) }, /* Novatel non-Vodafone EU740 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x5010) }, /* Novatel U727 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel U727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */
@@ -232,6 +279,10 @@
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_2) }, /* Novatel Embedded product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_2) }, /* Novatel Global product */
+ { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
+ { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
+ { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
+
{ USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
{ USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
{ USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
@@ -249,6 +300,7 @@
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
+ { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index b517f93..e3d241f 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -265,8 +265,8 @@
.description = "TI USB 3410 1 port adapter",
.usb_driver = &ti_usb_driver,
.id_table = ti_id_table_3410,
- .num_interrupt_in = 1,
- .num_bulk_in = 1,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = 1,
.num_ports = 1,
.attach = ti_startup,
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 3ce98e8..2138ba8 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -854,6 +854,7 @@
serial->num_interrupt_in = num_interrupt_in;
serial->num_interrupt_out = num_interrupt_out;
+#if 0
/* check that the device meets the driver's requirements */
if ((type->num_interrupt_in != NUM_DONT_CARE &&
type->num_interrupt_in != num_interrupt_in)
@@ -867,6 +868,7 @@
kfree(serial);
return -EIO;
}
+#endif
/* found all that we need */
dev_info(&interface->dev, "%s converter detected\n",
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 22b3f78..c2b01f7 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -191,7 +191,7 @@
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
- .num_bulk_out = 2,
+ .num_bulk_out = NUM_DONT_CARE,
.num_ports = 2,
.open = visor_open,
.close = visor_close,
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index e5219a5..9125207 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1530,16 +1530,104 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by fangxiaozhi <fangxiaozhi60675@huawei.com>
- * and by linlei <linlei83@huawei.com>
- * Patch reworked by Johann Wilhelm <johann.wilhelm@student.tugraz.at>
- * This brings the HUAWEI E220 devices into multi-port mode
+/* Reported by fangxiaozhi <huananhu@huawei.com>
+ * This brings the HUAWEI data card devices into multi-port mode
*/
+UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
0),
+UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 1194f5e..01072f4 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1521,6 +1521,7 @@
static void __exit
fbmem_exit(void)
{
+ remove_proc_entry("fb", NULL);
class_destroy(fb_class);
unregister_chrdev(FB_MAJOR, "fb");
}
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index aa71402..c2fa5c6 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -214,10 +214,7 @@
{
struct vring_virtqueue *vq = to_vvq(_vq);
- START_USE(vq);
- BUG_ON(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT);
vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
- END_USE(vq);
}
static bool vring_enable_cb(struct virtqueue *_vq)
diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c
index fb5ed64..ae0fca5 100644
--- a/drivers/watchdog/at32ap700x_wdt.c
+++ b/drivers/watchdog/at32ap700x_wdt.c
@@ -418,6 +418,9 @@
#define at32_wdt_resume NULL
#endif
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:at32_wdt");
+
static struct platform_driver at32_wdt_driver = {
.remove = __exit_p(at32_wdt_remove),
.suspend = at32_wdt_suspend,
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index a684b1e..9ff9a95 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -286,3 +286,4 @@
MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:at91_wdt");
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index a61cbd4..1782c79 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c
@@ -248,6 +248,7 @@
static struct platform_driver platform_wdt_driver = {
.driver = {
.name = "watchdog",
+ .owner = THIS_MODULE,
},
.probe = davinci_wdt_probe,
.remove = davinci_wdt_remove,
@@ -277,3 +278,4 @@
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:watchdog");
diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c
index 1efcad3..445b7e8 100644
--- a/drivers/watchdog/it8712f_wdt.c
+++ b/drivers/watchdog/it8712f_wdt.c
@@ -111,15 +111,6 @@
return val;
}
-static void
-superio_outw(int val, int reg)
-{
- outb(reg++, REG);
- outb((val >> 8) & 0xff, VAL);
- outb(reg, REG);
- outb(val & 0xff, VAL);
-}
-
static inline void
superio_select(int ldn)
{
@@ -170,9 +161,8 @@
superio_outb(config, WDT_CONFIG);
if (revision >= 0x08)
- superio_outw(units, WDT_TIMEOUT);
- else
- superio_outb(units, WDT_TIMEOUT);
+ superio_outb(units >> 8, WDT_TIMEOUT + 1);
+ superio_outb(units, WDT_TIMEOUT);
}
static int
@@ -210,6 +200,8 @@
superio_outb(0, WDT_CONFIG);
superio_outb(0, WDT_CONTROL);
+ if (revision >= 0x08)
+ superio_outb(0, WDT_TIMEOUT + 1);
superio_outb(0, WDT_TIMEOUT);
superio_exit();
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index e3a29c3..df5a6b8 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -306,3 +306,4 @@
MODULE_DESCRIPTION("Watchdog driver for KS8695");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:ks8695_wdt");
diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c
index 6369f56..b16c5cd 100644
--- a/drivers/watchdog/mpc83xx_wdt.c
+++ b/drivers/watchdog/mpc83xx_wdt.c
@@ -206,6 +206,7 @@
.remove = __devexit_p(mpc83xx_wdt_remove),
.driver = {
.name = "mpc83xx_wdt",
+ .owner = THIS_MODULE,
},
};
@@ -226,3 +227,4 @@
MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:mpc83xx_wdt");
diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c
index 0d2b277..009573b 100644
--- a/drivers/watchdog/mpcore_wdt.c
+++ b/drivers/watchdog/mpcore_wdt.c
@@ -392,6 +392,9 @@
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:mpcore_wdt");
+
static struct platform_driver mpcore_wdt_driver = {
.probe = mpcore_wdt_probe,
.remove = __devexit_p(mpcore_wdt_remove),
diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c
index 10b89f2..a8e6738 100644
--- a/drivers/watchdog/mtx-1_wdt.c
+++ b/drivers/watchdog/mtx-1_wdt.c
@@ -243,6 +243,7 @@
.probe = mtx1_wdt_probe,
.remove = mtx1_wdt_remove,
.driver.name = "mtx1-wdt",
+ .driver.owner = THIS_MODULE,
};
static int __init mtx1_wdt_init(void)
@@ -262,3 +263,4 @@
MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:mtx1-wdt");
diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c
index 0365c31..b59ca32 100644
--- a/drivers/watchdog/mv64x60_wdt.c
+++ b/drivers/watchdog/mv64x60_wdt.c
@@ -324,3 +324,4 @@
MODULE_DESCRIPTION("MV64x60 watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" MV64x60_WDT_NAME);
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 635ca45..74bc39a 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -387,3 +387,4 @@
MODULE_AUTHOR("George G. Davis");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:omap_wdt");
diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c
index b04aa09..6b8483d 100644
--- a/drivers/watchdog/pnx4008_wdt.c
+++ b/drivers/watchdog/pnx4008_wdt.c
@@ -321,6 +321,7 @@
static struct platform_driver platform_wdt_driver = {
.driver = {
.name = "watchdog",
+ .owner = THIS_MODULE,
},
.probe = pnx4008_wdt_probe,
.remove = pnx4008_wdt_remove,
@@ -354,3 +355,4 @@
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:watchdog");
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 7645e88..98532c0 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -561,3 +561,4 @@
MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:s3c2410-wdt");
diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c
index 328b3c7..57cefef 100644
--- a/drivers/watchdog/txx9wdt.c
+++ b/drivers/watchdog/txx9wdt.c
@@ -274,3 +274,4 @@
MODULE_DESCRIPTION("TXx9 Watchdog Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:txx9wdt");
diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c
index ea94dba..d85dc6d 100644
--- a/drivers/xen/grant-table.c
+++ b/drivers/xen/grant-table.c
@@ -381,11 +381,15 @@
static int grow_gnttab_list(unsigned int more_frames)
{
unsigned int new_nr_grant_frames, extra_entries, i;
+ unsigned int nr_glist_frames, new_nr_glist_frames;
new_nr_grant_frames = nr_grant_frames + more_frames;
extra_entries = more_frames * GREFS_PER_GRANT_FRAME;
- for (i = nr_grant_frames; i < new_nr_grant_frames; i++) {
+ nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+ new_nr_glist_frames =
+ (new_nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+ for (i = nr_glist_frames; i < new_nr_glist_frames; i++) {
gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_ATOMIC);
if (!gnttab_list[i])
goto grow_nomem;
@@ -407,7 +411,7 @@
return 0;
grow_nomem:
- for ( ; i >= nr_grant_frames; i--)
+ for ( ; i >= nr_glist_frames; i--)
free_page((unsigned long) gnttab_list[i]);
return -ENOMEM;
}
@@ -530,7 +534,7 @@
static int __devinit gnttab_init(void)
{
int i;
- unsigned int max_nr_glist_frames;
+ unsigned int max_nr_glist_frames, nr_glist_frames;
unsigned int nr_init_grefs;
if (!is_running_on_xen())
@@ -543,15 +547,15 @@
* grant reference free list on the current hypervisor.
*/
max_nr_glist_frames = (boot_max_nr_grant_frames *
- GREFS_PER_GRANT_FRAME /
- (PAGE_SIZE / sizeof(grant_ref_t)));
+ GREFS_PER_GRANT_FRAME / RPP);
gnttab_list = kmalloc(max_nr_glist_frames * sizeof(grant_ref_t *),
GFP_KERNEL);
if (gnttab_list == NULL)
return -ENOMEM;
- for (i = 0; i < nr_grant_frames; i++) {
+ nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+ for (i = 0; i < nr_glist_frames; i++) {
gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL);
if (gnttab_list[i] == NULL)
goto ini_nomem;
diff --git a/fs/Kconfig b/fs/Kconfig
index d731282..c509123 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1744,10 +1744,10 @@
If you want your Linux box to mount its whole root file system (the
one containing the directory /) from some other computer over the
net via NFS (presumably because your box doesn't have a hard disk),
- say Y. Read <file:Documentation/nfsroot.txt> for details. It is
- likely that in this case, you also want to say Y to "Kernel level IP
- autoconfiguration" so that your box can discover its network address
- at boot time.
+ say Y. Read <file:Documentation/filesystems/nfsroot.txt> for
+ details. It is likely that in this case, you also want to say Y to
+ "Kernel level IP autoconfiguration" so that your box can discover
+ its network address at boot time.
Most people say N here.
diff --git a/fs/afs/cell.c b/fs/afs/cell.c
index 788865d..584bb0f 100644
--- a/fs/afs/cell.c
+++ b/fs/afs/cell.c
@@ -138,6 +138,7 @@
cell = afs_cell_alloc(name, vllist);
if (IS_ERR(cell)) {
_leave(" = %ld", PTR_ERR(cell));
+ up_write(&afs_cells_sem);
return cell;
}
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 9ba16ed..eec41c7 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -749,7 +749,7 @@
extern unsigned afs_debug;
#define dbgprintk(FMT,...) \
- printk("[%x%-6.6s] "FMT"\n", smp_processor_id(), current->comm ,##__VA_ARGS__)
+ printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
/* make sure we maintain the format strings, even when debugging is disabled */
static inline __attribute__((format(printf,1,2)))
diff --git a/fs/afs/main.c b/fs/afs/main.c
index 0f60f6b..2d3e5d4 100644
--- a/fs/afs/main.c
+++ b/fs/afs/main.c
@@ -22,7 +22,7 @@
unsigned afs_debug;
module_param_named(debug, afs_debug, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(afs_debug, "AFS debugging mask");
+MODULE_PARM_DESC(debug, "AFS debugging mask");
static char *rootcell;
diff --git a/fs/aio.c b/fs/aio.c
index 6af9219..2283686 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -936,14 +936,6 @@
return 1;
}
- /*
- * Check if the user asked us to deliver the result through an
- * eventfd. The eventfd_signal() function is safe to be called
- * from IRQ context.
- */
- if (!IS_ERR(iocb->ki_eventfd))
- eventfd_signal(iocb->ki_eventfd, 1);
-
info = &ctx->ring_info;
/* add a completion event to the ring buffer.
@@ -992,6 +984,15 @@
kunmap_atomic(ring, KM_IRQ1);
pr_debug("added to ring %p at [%lu]\n", iocb, tail);
+
+ /*
+ * Check if the user asked us to deliver the result through an
+ * eventfd. The eventfd_signal() function is safe to be called
+ * from IRQ context.
+ */
+ if (!IS_ERR(iocb->ki_eventfd))
+ eventfd_signal(iocb->ki_eventfd, 1);
+
put_rq:
/* everything turned out well, dispose of the aiocb. */
ret = __aio_put_req(ctx, iocb);
@@ -1790,6 +1791,7 @@
put_ioctx(ioctx);
}
+ asmlinkage_protect(5, ret, ctx_id, min_nr, nr, events, timeout);
return ret;
}
diff --git a/fs/buffer.c b/fs/buffer.c
index 9819632..39ff144 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1181,7 +1181,20 @@
void mark_buffer_dirty(struct buffer_head *bh)
{
WARN_ON_ONCE(!buffer_uptodate(bh));
- if (!buffer_dirty(bh) && !test_set_buffer_dirty(bh))
+
+ /*
+ * Very *carefully* optimize the it-is-already-dirty case.
+ *
+ * Don't let the final "is it dirty" escape to before we
+ * perhaps modified the buffer.
+ */
+ if (buffer_dirty(bh)) {
+ smp_mb();
+ if (buffer_dirty(bh))
+ return;
+ }
+
+ if (!test_set_buffer_dirty(bh))
__set_page_dirty(bh->b_page, page_mapping(bh->b_page), 0);
}
diff --git a/fs/efs/inode.c b/fs/efs/inode.c
index 79e19e5..a8e7797 100644
--- a/fs/efs/inode.c
+++ b/fs/efs/inode.c
@@ -140,7 +140,7 @@
brelse(bh);
#ifdef DEBUG
- printk(KERN_DEBUG "EFS: read_inode(): inode %lu, extents %d, mode %o\n",
+ printk(KERN_DEBUG "EFS: efs_iget(): inode %lu, extents %d, mode %o\n",
inode->i_ino, in->numextents, inode->i_mode);
#endif
diff --git a/fs/ext2/xattr.c b/fs/ext2/xattr.c
index 3e8683d..a99d46f 100644
--- a/fs/ext2/xattr.c
+++ b/fs/ext2/xattr.c
@@ -835,7 +835,7 @@
struct mb_cache_entry *ce;
int error;
- ce = mb_cache_entry_alloc(ext2_xattr_cache);
+ ce = mb_cache_entry_alloc(ext2_xattr_cache, GFP_NOFS);
if (!ce)
return -ENOMEM;
error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, &hash);
diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c
index a6ea4d6..4285654 100644
--- a/fs/ext3/xattr.c
+++ b/fs/ext3/xattr.c
@@ -1126,7 +1126,7 @@
struct mb_cache_entry *ce;
int error;
- ce = mb_cache_entry_alloc(ext3_xattr_cache);
+ ce = mb_cache_entry_alloc(ext3_xattr_cache, GFP_NOFS);
if (!ce) {
ea_bdebug(bh, "out of memory");
return;
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index d796213..e9054c1 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1386,7 +1386,7 @@
struct mb_cache_entry *ce;
int error;
- ce = mb_cache_entry_alloc(ext4_xattr_cache);
+ ce = mb_cache_entry_alloc(ext4_xattr_cache, GFP_NOFS);
if (!ce) {
ea_bdebug(bh, "out of memory");
return;
diff --git a/fs/hfsplus/dir.c b/fs/hfsplus/dir.c
index 2968364..5f40236 100644
--- a/fs/hfsplus/dir.c
+++ b/fs/hfsplus/dir.c
@@ -340,16 +340,23 @@
if (inode->i_nlink > 0)
drop_nlink(inode);
- hfsplus_delete_inode(inode);
- if (inode->i_ino != cnid && !inode->i_nlink) {
- if (!atomic_read(&HFSPLUS_I(inode).opencnt)) {
- res = hfsplus_delete_cat(inode->i_ino, HFSPLUS_SB(sb).hidden_dir, NULL);
- if (!res)
- hfsplus_delete_inode(inode);
- } else
- inode->i_flags |= S_DEAD;
- } else
+ if (inode->i_ino == cnid)
clear_nlink(inode);
+ if (!inode->i_nlink) {
+ if (inode->i_ino != cnid) {
+ HFSPLUS_SB(sb).file_count--;
+ if (!atomic_read(&HFSPLUS_I(inode).opencnt)) {
+ res = hfsplus_delete_cat(inode->i_ino,
+ HFSPLUS_SB(sb).hidden_dir,
+ NULL);
+ if (!res)
+ hfsplus_delete_inode(inode);
+ } else
+ inode->i_flags |= S_DEAD;
+ } else
+ hfsplus_delete_inode(inode);
+ } else
+ HFSPLUS_SB(sb).file_count--;
inode->i_ctime = CURRENT_TIME_SEC;
mark_inode_dirty(inode);
diff --git a/fs/jffs2/file.c b/fs/jffs2/file.c
index f9c5dd6..dcc2734 100644
--- a/fs/jffs2/file.c
+++ b/fs/jffs2/file.c
@@ -129,7 +129,7 @@
struct inode *inode = mapping->host;
struct jffs2_inode_info *f = JFFS2_INODE_INFO(inode);
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
- uint32_t pageofs = pos & (PAGE_CACHE_SIZE - 1);
+ uint32_t pageofs = index << PAGE_CACHE_SHIFT;
int ret = 0;
pg = __grab_cache_page(mapping, index);
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index e198506..2bc7d8a 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -2172,7 +2172,7 @@
}
/* update the free count for this dmap */
- dp->nfree = cpu_to_le32(le32_to_cpu(dp->nfree) - nblocks);
+ le32_add_cpu(&dp->nfree, -nblocks);
BMAP_LOCK(bmp);
@@ -2316,7 +2316,7 @@
/* update the free count for this dmap.
*/
- dp->nfree = cpu_to_le32(le32_to_cpu(dp->nfree) + nblocks);
+ le32_add_cpu(&dp->nfree, nblocks);
BMAP_LOCK(bmp);
@@ -3226,7 +3226,7 @@
}
/* update the free count for this dmap */
- dp->nfree = cpu_to_le32(le32_to_cpu(dp->nfree) - nblocks);
+ le32_add_cpu(&dp->nfree, -nblocks);
/* reconstruct summary tree */
dbInitDmapTree(dp);
@@ -3660,9 +3660,8 @@
goto initTree;
}
} else {
- dp->nblocks =
- cpu_to_le32(le32_to_cpu(dp->nblocks) + nblocks);
- dp->nfree = cpu_to_le32(le32_to_cpu(dp->nfree) + nblocks);
+ le32_add_cpu(&dp->nblocks, nblocks);
+ le32_add_cpu(&dp->nfree, nblocks);
}
/* word number containing start block number */
diff --git a/fs/jfs/jfs_dmap.h b/fs/jfs/jfs_dmap.h
index 11e6d47..1a6eb41 100644
--- a/fs/jfs/jfs_dmap.h
+++ b/fs/jfs/jfs_dmap.h
@@ -61,7 +61,7 @@
* determine the maximum free string for four (lower level) nodes
* of the tree.
*/
-static __inline signed char TREEMAX(signed char *cp)
+static inline signed char TREEMAX(signed char *cp)
{
signed char tmp1, tmp2;
diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c
index 9bf29f7..734ec91 100644
--- a/fs/jfs/jfs_imap.c
+++ b/fs/jfs/jfs_imap.c
@@ -1019,8 +1019,7 @@
/* update the free inode counts at the iag, ag and
* map level.
*/
- iagp->nfreeinos =
- cpu_to_le32(le32_to_cpu(iagp->nfreeinos) + 1);
+ le32_add_cpu(&iagp->nfreeinos, 1);
imap->im_agctl[agno].numfree += 1;
atomic_inc(&imap->im_numfree);
@@ -1219,9 +1218,8 @@
/* update the number of free inodes and number of free extents
* for the iag.
*/
- iagp->nfreeinos = cpu_to_le32(le32_to_cpu(iagp->nfreeinos) -
- (INOSPEREXT - 1));
- iagp->nfreeexts = cpu_to_le32(le32_to_cpu(iagp->nfreeexts) + 1);
+ le32_add_cpu(&iagp->nfreeinos, -(INOSPEREXT - 1));
+ le32_add_cpu(&iagp->nfreeexts, 1);
/* update the number of free inodes and backed inodes
* at the ag and inode map level.
@@ -2124,7 +2122,7 @@
/* update the free inode count at the iag, ag, inode
* map levels.
*/
- iagp->nfreeinos = cpu_to_le32(le32_to_cpu(iagp->nfreeinos) - 1);
+ le32_add_cpu(&iagp->nfreeinos, -1);
imap->im_agctl[agno].numfree -= 1;
atomic_dec(&imap->im_numfree);
@@ -2378,9 +2376,8 @@
/* update the free inode and free extent counts for the
* iag.
*/
- iagp->nfreeinos = cpu_to_le32(le32_to_cpu(iagp->nfreeinos) +
- (INOSPEREXT - 1));
- iagp->nfreeexts = cpu_to_le32(le32_to_cpu(iagp->nfreeexts) - 1);
+ le32_add_cpu(&iagp->nfreeinos, (INOSPEREXT - 1));
+ le32_add_cpu(&iagp->nfreeexts, -1);
/* update the free and backed inode counts for the ag.
*/
diff --git a/fs/jfs/jfs_xtree.c b/fs/jfs/jfs_xtree.c
index a000aaa..5a61ebf 100644
--- a/fs/jfs/jfs_xtree.c
+++ b/fs/jfs/jfs_xtree.c
@@ -905,8 +905,7 @@
XT_PUTENTRY(xad, xflag, xoff, xlen, xaddr);
/* advance next available entry index */
- p->header.nextindex =
- cpu_to_le16(le16_to_cpu(p->header.nextindex) + 1);
+ le16_add_cpu(&p->header.nextindex, 1);
/* Don't log it if there are no links to the file */
if (!test_cflag(COMMIT_Nolink, ip)) {
@@ -997,8 +996,7 @@
split->addr);
/* advance next available entry index */
- sp->header.nextindex =
- cpu_to_le16(le16_to_cpu(sp->header.nextindex) + 1);
+ le16_add_cpu(&sp->header.nextindex, 1);
/* Don't log it if there are no links to the file */
if (!test_cflag(COMMIT_Nolink, ip)) {
@@ -1167,9 +1165,7 @@
JFS_SBI(ip->i_sb)->nbperpage, rcbn);
/* advance next available entry index. */
- sp->header.nextindex =
- cpu_to_le16(le16_to_cpu(sp->header.nextindex) +
- 1);
+ le16_add_cpu(&sp->header.nextindex, 1);
/* Don't log it if there are no links to the file */
if (!test_cflag(COMMIT_Nolink, ip)) {
@@ -1738,8 +1734,7 @@
XT_PUTENTRY(xad, XAD_NEW, xoff, len, xaddr);
/* advance next available entry index */
- p->header.nextindex =
- cpu_to_le16(le16_to_cpu(p->header.nextindex) + 1);
+ le16_add_cpu(&p->header.nextindex, 1);
}
/* get back old entry */
@@ -1905,8 +1900,7 @@
XT_PUTENTRY(xad, XAD_NEW, xoff, xlen, xaddr);
/* advance next available entry index */
- p->header.nextindex =
- cpu_to_le16(le16_to_cpu(p->header.nextindex) + 1);
+ le16_add_cpu(&p->header.nextindex, 1);
}
/* get back old XAD */
@@ -2567,8 +2561,7 @@
XT_PUTENTRY(xad, xflag, xoff, xlen, xaddr);
/* advance next available entry index */
- p->header.nextindex =
- cpu_to_le16(le16_to_cpu(p->header.nextindex) + 1);
+ le16_add_cpu(&p->header.nextindex, 1);
xtlck->lwm.offset =
(xtlck->lwm.offset) ? min(index,(int) xtlck->lwm.offset) : index;
@@ -2631,8 +2624,7 @@
* delete the entry from the leaf page
*/
nextindex = le16_to_cpu(p->header.nextindex);
- p->header.nextindex =
- cpu_to_le16(le16_to_cpu(p->header.nextindex) - 1);
+ le16_add_cpu(&p->header.nextindex, -1);
/*
* if the leaf page bocome empty, free the page
@@ -2795,9 +2787,7 @@
(nextindex - index -
1) << L2XTSLOTSIZE);
- p->header.nextindex =
- cpu_to_le16(le16_to_cpu(p->header.nextindex) -
- 1);
+ le16_add_cpu(&p->header.nextindex, -1);
jfs_info("xtDeleteUp(entry): 0x%lx[%d]",
(ulong) parent->bn, index);
}
diff --git a/fs/locks.c b/fs/locks.c
index d83fab1..43c0af2 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1801,17 +1801,21 @@
if (error)
goto out;
- for (;;) {
- error = vfs_lock_file(filp, cmd, file_lock, NULL);
- if (error != -EAGAIN || cmd == F_SETLK)
- break;
- error = wait_event_interruptible(file_lock->fl_wait,
- !file_lock->fl_next);
- if (!error)
- continue;
+ if (filp->f_op && filp->f_op->lock != NULL)
+ error = filp->f_op->lock(filp, cmd, file_lock);
+ else {
+ for (;;) {
+ error = posix_lock_file(filp, file_lock, NULL);
+ if (error != -EAGAIN || cmd == F_SETLK)
+ break;
+ error = wait_event_interruptible(file_lock->fl_wait,
+ !file_lock->fl_next);
+ if (!error)
+ continue;
- locks_delete_block(file_lock);
- break;
+ locks_delete_block(file_lock);
+ break;
+ }
}
/*
@@ -1925,17 +1929,21 @@
if (error)
goto out;
- for (;;) {
- error = vfs_lock_file(filp, cmd, file_lock, NULL);
- if (error != -EAGAIN || cmd == F_SETLK64)
- break;
- error = wait_event_interruptible(file_lock->fl_wait,
- !file_lock->fl_next);
- if (!error)
- continue;
+ if (filp->f_op && filp->f_op->lock != NULL)
+ error = filp->f_op->lock(filp, cmd, file_lock);
+ else {
+ for (;;) {
+ error = posix_lock_file(filp, file_lock, NULL);
+ if (error != -EAGAIN || cmd == F_SETLK64)
+ break;
+ error = wait_event_interruptible(file_lock->fl_wait,
+ !file_lock->fl_next);
+ if (!error)
+ continue;
- locks_delete_block(file_lock);
- break;
+ locks_delete_block(file_lock);
+ break;
+ }
}
/*
diff --git a/fs/mbcache.c b/fs/mbcache.c
index eb31b73..ec88ff3 100644
--- a/fs/mbcache.c
+++ b/fs/mbcache.c
@@ -399,11 +399,11 @@
* if no more memory was available.
*/
struct mb_cache_entry *
-mb_cache_entry_alloc(struct mb_cache *cache)
+mb_cache_entry_alloc(struct mb_cache *cache, gfp_t gfp_flags)
{
struct mb_cache_entry *ce;
- ce = kmem_cache_alloc(cache->c_entry_cache, GFP_KERNEL);
+ ce = kmem_cache_alloc(cache->c_entry_cache, gfp_flags);
if (ce) {
atomic_inc(&cache->c_entry_count);
INIT_LIST_HEAD(&ce->e_lru_list);
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index ef57a5a..5d2e9d9 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -64,7 +64,11 @@
.write = do_sync_write,
.aio_read = nfs_file_read,
.aio_write = nfs_file_write,
+#ifdef CONFIG_MMU
.mmap = nfs_file_mmap,
+#else
+ .mmap = generic_file_mmap,
+#endif
.open = nfs_file_open,
.flush = nfs_file_flush,
.release = nfs_file_release,
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index a4c7cf2..6f88d7c 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -506,6 +506,7 @@
ctx->cred = get_rpccred(cred);
ctx->state = NULL;
ctx->lockowner = current->files;
+ ctx->flags = 0;
ctx->error = 0;
ctx->dir_cookie = 0;
atomic_set(&ctx->count, 1);
diff --git a/fs/open.c b/fs/open.c
index a4b1202..3fa4e4f 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -335,7 +335,7 @@
{
long ret = do_sys_ftruncate(fd, length, 1);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(2, ret, fd, length);
return ret;
}
@@ -350,7 +350,7 @@
{
long ret = do_sys_ftruncate(fd, length, 0);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(2, ret, fd, length);
return ret;
}
#endif
@@ -1067,7 +1067,7 @@
ret = do_sys_open(AT_FDCWD, filename, flags, mode);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, filename, flags, mode);
return ret;
}
@@ -1081,7 +1081,7 @@
ret = do_sys_open(dfd, filename, flags, mode);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(4, ret, dfd, filename, flags, mode);
return ret;
}
diff --git a/fs/signalfd.c b/fs/signalfd.c
index cb2b63a..8ead0db 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -111,9 +111,14 @@
err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
break;
- default: /* this is just in case for now ... */
+ default:
+ /*
+ * This case catches also the signals queued by sigqueue().
+ */
err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
+ err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
+ err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
break;
}
diff --git a/fs/splice.c b/fs/splice.c
index 0670c91..eeb1a86 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -320,7 +320,7 @@
break;
error = add_to_page_cache_lru(page, mapping, index,
- GFP_KERNEL);
+ mapping_gfp_mask(mapping));
if (unlikely(error)) {
page_cache_release(page);
if (error == -EEXIST)
@@ -370,8 +370,10 @@
* for an in-flight io page
*/
if (flags & SPLICE_F_NONBLOCK) {
- if (TestSetPageLocked(page))
+ if (TestSetPageLocked(page)) {
+ error = -EAGAIN;
break;
+ }
} else
lock_page(page);
@@ -479,9 +481,8 @@
struct pipe_inode_info *pipe, size_t len,
unsigned int flags)
{
- ssize_t spliced;
- int ret;
loff_t isize, left;
+ int ret;
isize = i_size_read(in->f_mapping->host);
if (unlikely(*ppos >= isize))
@@ -491,29 +492,9 @@
if (unlikely(left < len))
len = left;
- ret = 0;
- spliced = 0;
- while (len && !spliced) {
- ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
-
- if (ret < 0)
- break;
- else if (!ret) {
- if (spliced)
- break;
- if (flags & SPLICE_F_NONBLOCK) {
- ret = -EAGAIN;
- break;
- }
- }
-
+ ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
+ if (ret > 0)
*ppos += ret;
- len -= ret;
- spliced += ret;
- }
-
- if (spliced)
- return spliced;
return ret;
}
diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig
index 35115bc..524021f 100644
--- a/fs/xfs/Kconfig
+++ b/fs/xfs/Kconfig
@@ -35,18 +35,6 @@
with or without the generic quota support enabled (CONFIG_QUOTA) -
they are completely independent subsystems.
-config XFS_SECURITY
- bool "XFS Security Label support"
- depends on XFS_FS
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute namespace for inode security
- labels in the XFS filesystem.
-
- If you are not using a security module that requires using
- extended attributes for inode security labels, say N.
-
config XFS_POSIX_ACL
bool "XFS POSIX ACL support"
depends on XFS_FS
diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c
index e040f1c..9b1bb17 100644
--- a/fs/xfs/linux-2.6/kmem.c
+++ b/fs/xfs/linux-2.6/kmem.c
@@ -37,7 +37,7 @@
#ifdef DEBUG
if (unlikely(!(flags & KM_LARGE) && (size > PAGE_SIZE))) {
printk(KERN_WARNING "Large %s attempt, size=%ld\n",
- __FUNCTION__, (long)size);
+ __func__, (long)size);
dump_stack();
}
#endif
@@ -52,7 +52,7 @@
if (!(++retries % 100))
printk(KERN_ERR "XFS: possible memory allocation "
"deadlock in %s (mode:0x%x)\n",
- __FUNCTION__, lflags);
+ __func__, lflags);
congestion_wait(WRITE, HZ/50);
} while (1);
}
@@ -129,7 +129,7 @@
if (!(++retries % 100))
printk(KERN_ERR "XFS: possible memory allocation "
"deadlock in %s (mode:0x%x)\n",
- __FUNCTION__, lflags);
+ __func__, lflags);
congestion_wait(WRITE, HZ/50);
} while (1);
}
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index e051952..a55c3b2 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -243,8 +243,12 @@
size_t size = ioend->io_size;
if (likely(!ioend->io_error)) {
- if (!XFS_FORCED_SHUTDOWN(ip->i_mount))
- xfs_iomap_write_unwritten(ip, offset, size);
+ if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+ int error;
+ error = xfs_iomap_write_unwritten(ip, offset, size);
+ if (error)
+ ioend->io_error = error;
+ }
xfs_setfilesize(ioend);
}
xfs_destroy_ioend(ioend);
@@ -1532,9 +1536,9 @@
struct xfs_inode *ip = XFS_I(inode);
xfs_itrace_entry(XFS_I(inode));
- xfs_rwlock(ip, VRWLOCK_READ);
+ xfs_ilock(ip, XFS_IOLOCK_SHARED);
xfs_flush_pages(ip, (xfs_off_t)0, -1, 0, FI_REMAPF);
- xfs_rwunlock(ip, VRWLOCK_READ);
+ xfs_iunlock(ip, XFS_IOLOCK_SHARED);
return generic_block_bmap(mapping, block, xfs_get_blocks);
}
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index e347bfd..52f6846 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -400,7 +400,7 @@
printk(KERN_ERR
"XFS: possible memory allocation "
"deadlock in %s (mode:0x%x)\n",
- __FUNCTION__, gfp_mask);
+ __func__, gfp_mask);
XFS_STATS_INC(xb_page_retries);
xfsbufd_wakeup(0, gfp_mask);
@@ -598,7 +598,7 @@
error = _xfs_buf_map_pages(bp, flags);
if (unlikely(error)) {
printk(KERN_WARNING "%s: failed to map pages\n",
- __FUNCTION__);
+ __func__);
goto no_buffer;
}
}
@@ -778,7 +778,7 @@
error = _xfs_buf_map_pages(bp, XBF_MAPPED);
if (unlikely(error)) {
printk(KERN_WARNING "%s: failed to map pages\n",
- __FUNCTION__);
+ __func__);
goto fail_free_mem;
}
@@ -1060,7 +1060,7 @@
bp->b_flags &= ~(XBF_READ | XBF_WRITE | XBF_ASYNC);
bp->b_flags |= flags & (XBF_DELWRI | XBF_ASYNC);
xfs_buf_delwri_queue(bp, 1);
- return status;
+ return 0;
}
bp->b_flags &= ~(XBF_READ | XBF_WRITE | XBF_ASYNC | XBF_DELWRI | \
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index a3d207d..841d788 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -387,11 +387,15 @@
return error;
}
-static inline int xfs_bdwrite(void *mp, xfs_buf_t *bp)
+/*
+ * No error can be returned from xfs_buf_iostart for delwri
+ * buffers as they are queued and no I/O is issued.
+ */
+static inline void xfs_bdwrite(void *mp, xfs_buf_t *bp)
{
bp->b_strat = xfs_bdstrat_cb;
bp->b_fspriv3 = mp;
- return xfs_buf_iostart(bp, XBF_DELWRI | XBF_ASYNC);
+ (void)xfs_buf_iostart(bp, XBF_DELWRI | XBF_ASYNC);
}
#define XFS_bdstrat(bp) xfs_buf_iorequest(bp)
diff --git a/fs/xfs/linux-2.6/xfs_cred.h b/fs/xfs/linux-2.6/xfs_cred.h
index e7f3da6..652721c 100644
--- a/fs/xfs/linux-2.6/xfs_cred.h
+++ b/fs/xfs/linux-2.6/xfs_cred.h
@@ -30,7 +30,7 @@
extern struct cred *sys_cred;
/* this is a hack.. (assumes sys_cred is the only cred_t in the system) */
-static __inline int capable_cred(cred_t *cr, int cid)
+static inline int capable_cred(cred_t *cr, int cid)
{
return (cr == sys_cred) ? 1 : capable(cid);
}
diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c
index ca4f66c..265f016 100644
--- a/fs/xfs/linux-2.6/xfs_export.c
+++ b/fs/xfs/linux-2.6/xfs_export.c
@@ -22,6 +22,7 @@
#include "xfs_trans.h"
#include "xfs_sb.h"
#include "xfs_ag.h"
+#include "xfs_dir2.h"
#include "xfs_dmapi.h"
#include "xfs_mount.h"
#include "xfs_export.h"
@@ -30,8 +31,6 @@
#include "xfs_inode.h"
#include "xfs_vfsops.h"
-static struct dentry dotdot = { .d_name.name = "..", .d_name.len = 2, };
-
/*
* Note that we only accept fileids which are long enough rather than allow
* the parent generation number to default to zero. XFS considers zero a
@@ -66,7 +65,7 @@
int len;
/* Directories don't need their parent encoded, they have ".." */
- if (S_ISDIR(inode->i_mode))
+ if (S_ISDIR(inode->i_mode) || !connectable)
fileid_type = FILEID_INO32_GEN;
else
fileid_type = FILEID_INO32_GEN_PARENT;
@@ -213,17 +212,16 @@
struct dentry *child)
{
int error;
- bhv_vnode_t *cvp;
+ struct xfs_inode *cip;
struct dentry *parent;
- cvp = NULL;
- error = xfs_lookup(XFS_I(child->d_inode), &dotdot, &cvp);
+ error = xfs_lookup(XFS_I(child->d_inode), &xfs_name_dotdot, &cip);
if (unlikely(error))
return ERR_PTR(-error);
- parent = d_alloc_anon(vn_to_inode(cvp));
+ parent = d_alloc_anon(cip->i_vnode);
if (unlikely(!parent)) {
- VN_RELE(cvp);
+ iput(cip->i_vnode);
return ERR_PTR(-ENOMEM);
}
return parent;
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index edab1ff..0590524 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -469,16 +469,11 @@
struct inode *inode)
{
struct xfs_mount *mp = XFS_M(inode->i_sb);
+ struct xfs_inode *ip = XFS_I(inode);
- if (unlikely(mp->m_flags & XFS_MOUNT_DMAPI)) {
- if (DM_EVENT_ENABLED(XFS_I(inode), DM_EVENT_READ)) {
- bhv_vnode_t *vp = vn_from_inode(inode);
-
- return -XFS_SEND_DATA(mp, DM_EVENT_READ,
- vp, 0, 0, 0, NULL);
- }
- }
-
+ if (unlikely(mp->m_flags & XFS_MOUNT_DMAPI) &&
+ DM_EVENT_ENABLED(ip, DM_EVENT_READ))
+ return -XFS_SEND_DATA(mp, DM_EVENT_READ, ip, 0, 0, 0, NULL);
return 0;
}
#endif /* HAVE_FOP_OPEN_EXEC */
diff --git a/fs/xfs/linux-2.6/xfs_fs_subr.c b/fs/xfs/linux-2.6/xfs_fs_subr.c
index ac6d34c..1eefe61 100644
--- a/fs/xfs/linux-2.6/xfs_fs_subr.c
+++ b/fs/xfs/linux-2.6/xfs_fs_subr.c
@@ -17,18 +17,7 @@
*/
#include "xfs.h"
#include "xfs_vnodeops.h"
-
-/*
- * The following six includes are needed so that we can include
- * xfs_inode.h. What a mess..
- */
#include "xfs_bmap_btree.h"
-#include "xfs_inum.h"
-#include "xfs_dir2.h"
-#include "xfs_dir2_sf.h"
-#include "xfs_attr_sf.h"
-#include "xfs_dinode.h"
-
#include "xfs_inode.h"
int fs_noerr(void) { return 0; }
@@ -42,11 +31,10 @@
xfs_off_t last,
int fiopt)
{
- bhv_vnode_t *vp = XFS_ITOV(ip);
- struct inode *inode = vn_to_inode(vp);
+ struct address_space *mapping = ip->i_vnode->i_mapping;
- if (VN_CACHED(vp))
- truncate_inode_pages(inode->i_mapping, first);
+ if (mapping->nrpages)
+ truncate_inode_pages(mapping, first);
}
int
@@ -56,15 +44,14 @@
xfs_off_t last,
int fiopt)
{
- bhv_vnode_t *vp = XFS_ITOV(ip);
- struct inode *inode = vn_to_inode(vp);
+ struct address_space *mapping = ip->i_vnode->i_mapping;
int ret = 0;
- if (VN_CACHED(vp)) {
+ if (mapping->nrpages) {
xfs_iflags_clear(ip, XFS_ITRUNCATED);
- ret = filemap_write_and_wait(inode->i_mapping);
+ ret = filemap_write_and_wait(mapping);
if (!ret)
- truncate_inode_pages(inode->i_mapping, first);
+ truncate_inode_pages(mapping, first);
}
return ret;
}
@@ -77,17 +64,16 @@
uint64_t flags,
int fiopt)
{
- bhv_vnode_t *vp = XFS_ITOV(ip);
- struct inode *inode = vn_to_inode(vp);
+ struct address_space *mapping = ip->i_vnode->i_mapping;
int ret = 0;
int ret2;
- if (VN_DIRTY(vp)) {
+ if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
xfs_iflags_clear(ip, XFS_ITRUNCATED);
- ret = filemap_fdatawrite(inode->i_mapping);
+ ret = filemap_fdatawrite(mapping);
if (flags & XFS_B_ASYNC)
return ret;
- ret2 = filemap_fdatawait(inode->i_mapping);
+ ret2 = filemap_fdatawait(mapping);
if (!ret)
ret = ret2;
}
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index a9952e4..bf77597 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -651,314 +651,6 @@
return -error;
}
-/* prototypes for a few of the stack-hungry cases that have
- * their own functions. Functions are defined after their use
- * so gcc doesn't get fancy and inline them with -03 */
-
-STATIC int
-xfs_ioc_space(
- struct xfs_inode *ip,
- struct inode *inode,
- struct file *filp,
- int flags,
- unsigned int cmd,
- void __user *arg);
-
-STATIC int
-xfs_ioc_bulkstat(
- xfs_mount_t *mp,
- unsigned int cmd,
- void __user *arg);
-
-STATIC int
-xfs_ioc_fsgeometry_v1(
- xfs_mount_t *mp,
- void __user *arg);
-
-STATIC int
-xfs_ioc_fsgeometry(
- xfs_mount_t *mp,
- void __user *arg);
-
-STATIC int
-xfs_ioc_xattr(
- xfs_inode_t *ip,
- struct file *filp,
- unsigned int cmd,
- void __user *arg);
-
-STATIC int
-xfs_ioc_fsgetxattr(
- xfs_inode_t *ip,
- int attr,
- void __user *arg);
-
-STATIC int
-xfs_ioc_getbmap(
- struct xfs_inode *ip,
- int flags,
- unsigned int cmd,
- void __user *arg);
-
-STATIC int
-xfs_ioc_getbmapx(
- struct xfs_inode *ip,
- void __user *arg);
-
-int
-xfs_ioctl(
- xfs_inode_t *ip,
- struct file *filp,
- int ioflags,
- unsigned int cmd,
- void __user *arg)
-{
- struct inode *inode = filp->f_path.dentry->d_inode;
- xfs_mount_t *mp = ip->i_mount;
- int error;
-
- xfs_itrace_entry(XFS_I(inode));
- switch (cmd) {
-
- case XFS_IOC_ALLOCSP:
- case XFS_IOC_FREESP:
- case XFS_IOC_RESVSP:
- case XFS_IOC_UNRESVSP:
- case XFS_IOC_ALLOCSP64:
- case XFS_IOC_FREESP64:
- case XFS_IOC_RESVSP64:
- case XFS_IOC_UNRESVSP64:
- /*
- * Only allow the sys admin to reserve space unless
- * unwritten extents are enabled.
- */
- if (!XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb) &&
- !capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- return xfs_ioc_space(ip, inode, filp, ioflags, cmd, arg);
-
- case XFS_IOC_DIOINFO: {
- struct dioattr da;
- xfs_buftarg_t *target =
- XFS_IS_REALTIME_INODE(ip) ?
- mp->m_rtdev_targp : mp->m_ddev_targp;
-
- da.d_mem = da.d_miniosz = 1 << target->bt_sshift;
- da.d_maxiosz = INT_MAX & ~(da.d_miniosz - 1);
-
- if (copy_to_user(arg, &da, sizeof(da)))
- return -XFS_ERROR(EFAULT);
- return 0;
- }
-
- case XFS_IOC_FSBULKSTAT_SINGLE:
- case XFS_IOC_FSBULKSTAT:
- case XFS_IOC_FSINUMBERS:
- return xfs_ioc_bulkstat(mp, cmd, arg);
-
- case XFS_IOC_FSGEOMETRY_V1:
- return xfs_ioc_fsgeometry_v1(mp, arg);
-
- case XFS_IOC_FSGEOMETRY:
- return xfs_ioc_fsgeometry(mp, arg);
-
- case XFS_IOC_GETVERSION:
- return put_user(inode->i_generation, (int __user *)arg);
-
- case XFS_IOC_FSGETXATTR:
- return xfs_ioc_fsgetxattr(ip, 0, arg);
- case XFS_IOC_FSGETXATTRA:
- return xfs_ioc_fsgetxattr(ip, 1, arg);
- case XFS_IOC_GETXFLAGS:
- case XFS_IOC_SETXFLAGS:
- case XFS_IOC_FSSETXATTR:
- return xfs_ioc_xattr(ip, filp, cmd, arg);
-
- case XFS_IOC_FSSETDM: {
- struct fsdmidata dmi;
-
- if (copy_from_user(&dmi, arg, sizeof(dmi)))
- return -XFS_ERROR(EFAULT);
-
- error = xfs_set_dmattrs(ip, dmi.fsd_dmevmask,
- dmi.fsd_dmstate);
- return -error;
- }
-
- case XFS_IOC_GETBMAP:
- case XFS_IOC_GETBMAPA:
- return xfs_ioc_getbmap(ip, ioflags, cmd, arg);
-
- case XFS_IOC_GETBMAPX:
- return xfs_ioc_getbmapx(ip, arg);
-
- case XFS_IOC_FD_TO_HANDLE:
- case XFS_IOC_PATH_TO_HANDLE:
- case XFS_IOC_PATH_TO_FSHANDLE:
- return xfs_find_handle(cmd, arg);
-
- case XFS_IOC_OPEN_BY_HANDLE:
- return xfs_open_by_handle(mp, arg, filp, inode);
-
- case XFS_IOC_FSSETDM_BY_HANDLE:
- return xfs_fssetdm_by_handle(mp, arg, inode);
-
- case XFS_IOC_READLINK_BY_HANDLE:
- return xfs_readlink_by_handle(mp, arg, inode);
-
- case XFS_IOC_ATTRLIST_BY_HANDLE:
- return xfs_attrlist_by_handle(mp, arg, inode);
-
- case XFS_IOC_ATTRMULTI_BY_HANDLE:
- return xfs_attrmulti_by_handle(mp, arg, inode);
-
- case XFS_IOC_SWAPEXT: {
- error = xfs_swapext((struct xfs_swapext __user *)arg);
- return -error;
- }
-
- case XFS_IOC_FSCOUNTS: {
- xfs_fsop_counts_t out;
-
- error = xfs_fs_counts(mp, &out);
- if (error)
- return -error;
-
- if (copy_to_user(arg, &out, sizeof(out)))
- return -XFS_ERROR(EFAULT);
- return 0;
- }
-
- case XFS_IOC_SET_RESBLKS: {
- xfs_fsop_resblks_t inout;
- __uint64_t in;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (copy_from_user(&inout, arg, sizeof(inout)))
- return -XFS_ERROR(EFAULT);
-
- /* input parameter is passed in resblks field of structure */
- in = inout.resblks;
- error = xfs_reserve_blocks(mp, &in, &inout);
- if (error)
- return -error;
-
- if (copy_to_user(arg, &inout, sizeof(inout)))
- return -XFS_ERROR(EFAULT);
- return 0;
- }
-
- case XFS_IOC_GET_RESBLKS: {
- xfs_fsop_resblks_t out;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- error = xfs_reserve_blocks(mp, NULL, &out);
- if (error)
- return -error;
-
- if (copy_to_user(arg, &out, sizeof(out)))
- return -XFS_ERROR(EFAULT);
-
- return 0;
- }
-
- case XFS_IOC_FSGROWFSDATA: {
- xfs_growfs_data_t in;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (copy_from_user(&in, arg, sizeof(in)))
- return -XFS_ERROR(EFAULT);
-
- error = xfs_growfs_data(mp, &in);
- return -error;
- }
-
- case XFS_IOC_FSGROWFSLOG: {
- xfs_growfs_log_t in;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (copy_from_user(&in, arg, sizeof(in)))
- return -XFS_ERROR(EFAULT);
-
- error = xfs_growfs_log(mp, &in);
- return -error;
- }
-
- case XFS_IOC_FSGROWFSRT: {
- xfs_growfs_rt_t in;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (copy_from_user(&in, arg, sizeof(in)))
- return -XFS_ERROR(EFAULT);
-
- error = xfs_growfs_rt(mp, &in);
- return -error;
- }
-
- case XFS_IOC_FREEZE:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (inode->i_sb->s_frozen == SB_UNFROZEN)
- freeze_bdev(inode->i_sb->s_bdev);
- return 0;
-
- case XFS_IOC_THAW:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
- if (inode->i_sb->s_frozen != SB_UNFROZEN)
- thaw_bdev(inode->i_sb->s_bdev, inode->i_sb);
- return 0;
-
- case XFS_IOC_GOINGDOWN: {
- __uint32_t in;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (get_user(in, (__uint32_t __user *)arg))
- return -XFS_ERROR(EFAULT);
-
- error = xfs_fs_goingdown(mp, in);
- return -error;
- }
-
- case XFS_IOC_ERROR_INJECTION: {
- xfs_error_injection_t in;
-
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- if (copy_from_user(&in, arg, sizeof(in)))
- return -XFS_ERROR(EFAULT);
-
- error = xfs_errortag_add(in.errtag, mp);
- return -error;
- }
-
- case XFS_IOC_ERROR_CLEARALL:
- if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
-
- error = xfs_errortag_clearall(mp, 1);
- return -error;
-
- default:
- return -ENOTTY;
- }
-}
-
STATIC int
xfs_ioc_space(
struct xfs_inode *ip,
@@ -1179,85 +871,85 @@
}
STATIC int
-xfs_ioc_xattr(
+xfs_ioc_fssetxattr(
xfs_inode_t *ip,
struct file *filp,
- unsigned int cmd,
void __user *arg)
{
struct fsxattr fa;
struct bhv_vattr *vattr;
- int error = 0;
+ int error;
int attr_flags;
- unsigned int flags;
+
+ if (copy_from_user(&fa, arg, sizeof(fa)))
+ return -EFAULT;
vattr = kmalloc(sizeof(*vattr), GFP_KERNEL);
if (unlikely(!vattr))
return -ENOMEM;
- switch (cmd) {
- case XFS_IOC_FSSETXATTR: {
- if (copy_from_user(&fa, arg, sizeof(fa))) {
- error = -EFAULT;
- break;
- }
+ attr_flags = 0;
+ if (filp->f_flags & (O_NDELAY|O_NONBLOCK))
+ attr_flags |= ATTR_NONBLOCK;
- attr_flags = 0;
- if (filp->f_flags & (O_NDELAY|O_NONBLOCK))
- attr_flags |= ATTR_NONBLOCK;
+ vattr->va_mask = XFS_AT_XFLAGS | XFS_AT_EXTSIZE | XFS_AT_PROJID;
+ vattr->va_xflags = fa.fsx_xflags;
+ vattr->va_extsize = fa.fsx_extsize;
+ vattr->va_projid = fa.fsx_projid;
- vattr->va_mask = XFS_AT_XFLAGS | XFS_AT_EXTSIZE | XFS_AT_PROJID;
- vattr->va_xflags = fa.fsx_xflags;
- vattr->va_extsize = fa.fsx_extsize;
- vattr->va_projid = fa.fsx_projid;
+ error = -xfs_setattr(ip, vattr, attr_flags, NULL);
+ if (!error)
+ vn_revalidate(XFS_ITOV(ip)); /* update flags */
+ kfree(vattr);
+ return 0;
+}
- error = xfs_setattr(ip, vattr, attr_flags, NULL);
- if (likely(!error))
- vn_revalidate(XFS_ITOV(ip)); /* update flags */
- error = -error;
- break;
- }
+STATIC int
+xfs_ioc_getxflags(
+ xfs_inode_t *ip,
+ void __user *arg)
+{
+ unsigned int flags;
- case XFS_IOC_GETXFLAGS: {
- flags = xfs_di2lxflags(ip->i_d.di_flags);
- if (copy_to_user(arg, &flags, sizeof(flags)))
- error = -EFAULT;
- break;
- }
+ flags = xfs_di2lxflags(ip->i_d.di_flags);
+ if (copy_to_user(arg, &flags, sizeof(flags)))
+ return -EFAULT;
+ return 0;
+}
- case XFS_IOC_SETXFLAGS: {
- if (copy_from_user(&flags, arg, sizeof(flags))) {
- error = -EFAULT;
- break;
- }
+STATIC int
+xfs_ioc_setxflags(
+ xfs_inode_t *ip,
+ struct file *filp,
+ void __user *arg)
+{
+ struct bhv_vattr *vattr;
+ unsigned int flags;
+ int attr_flags;
+ int error;
- if (flags & ~(FS_IMMUTABLE_FL | FS_APPEND_FL | \
- FS_NOATIME_FL | FS_NODUMP_FL | \
- FS_SYNC_FL)) {
- error = -EOPNOTSUPP;
- break;
- }
+ if (copy_from_user(&flags, arg, sizeof(flags)))
+ return -EFAULT;
- attr_flags = 0;
- if (filp->f_flags & (O_NDELAY|O_NONBLOCK))
- attr_flags |= ATTR_NONBLOCK;
+ if (flags & ~(FS_IMMUTABLE_FL | FS_APPEND_FL | \
+ FS_NOATIME_FL | FS_NODUMP_FL | \
+ FS_SYNC_FL))
+ return -EOPNOTSUPP;
- vattr->va_mask = XFS_AT_XFLAGS;
- vattr->va_xflags = xfs_merge_ioc_xflags(flags,
- xfs_ip2xflags(ip));
+ vattr = kmalloc(sizeof(*vattr), GFP_KERNEL);
+ if (unlikely(!vattr))
+ return -ENOMEM;
- error = xfs_setattr(ip, vattr, attr_flags, NULL);
- if (likely(!error))
- vn_revalidate(XFS_ITOV(ip)); /* update flags */
- error = -error;
- break;
- }
+ attr_flags = 0;
+ if (filp->f_flags & (O_NDELAY|O_NONBLOCK))
+ attr_flags |= ATTR_NONBLOCK;
- default:
- error = -ENOTTY;
- break;
- }
+ vattr->va_mask = XFS_AT_XFLAGS;
+ vattr->va_xflags = xfs_merge_ioc_xflags(flags, xfs_ip2xflags(ip));
+ error = -xfs_setattr(ip, vattr, attr_flags, NULL);
+ if (likely(!error))
+ vn_revalidate(XFS_ITOV(ip)); /* update flags */
kfree(vattr);
return error;
}
@@ -1332,3 +1024,259 @@
return 0;
}
+
+int
+xfs_ioctl(
+ xfs_inode_t *ip,
+ struct file *filp,
+ int ioflags,
+ unsigned int cmd,
+ void __user *arg)
+{
+ struct inode *inode = filp->f_path.dentry->d_inode;
+ xfs_mount_t *mp = ip->i_mount;
+ int error;
+
+ xfs_itrace_entry(XFS_I(inode));
+ switch (cmd) {
+
+ case XFS_IOC_ALLOCSP:
+ case XFS_IOC_FREESP:
+ case XFS_IOC_RESVSP:
+ case XFS_IOC_UNRESVSP:
+ case XFS_IOC_ALLOCSP64:
+ case XFS_IOC_FREESP64:
+ case XFS_IOC_RESVSP64:
+ case XFS_IOC_UNRESVSP64:
+ /*
+ * Only allow the sys admin to reserve space unless
+ * unwritten extents are enabled.
+ */
+ if (!xfs_sb_version_hasextflgbit(&mp->m_sb) &&
+ !capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ return xfs_ioc_space(ip, inode, filp, ioflags, cmd, arg);
+
+ case XFS_IOC_DIOINFO: {
+ struct dioattr da;
+ xfs_buftarg_t *target =
+ XFS_IS_REALTIME_INODE(ip) ?
+ mp->m_rtdev_targp : mp->m_ddev_targp;
+
+ da.d_mem = da.d_miniosz = 1 << target->bt_sshift;
+ da.d_maxiosz = INT_MAX & ~(da.d_miniosz - 1);
+
+ if (copy_to_user(arg, &da, sizeof(da)))
+ return -XFS_ERROR(EFAULT);
+ return 0;
+ }
+
+ case XFS_IOC_FSBULKSTAT_SINGLE:
+ case XFS_IOC_FSBULKSTAT:
+ case XFS_IOC_FSINUMBERS:
+ return xfs_ioc_bulkstat(mp, cmd, arg);
+
+ case XFS_IOC_FSGEOMETRY_V1:
+ return xfs_ioc_fsgeometry_v1(mp, arg);
+
+ case XFS_IOC_FSGEOMETRY:
+ return xfs_ioc_fsgeometry(mp, arg);
+
+ case XFS_IOC_GETVERSION:
+ return put_user(inode->i_generation, (int __user *)arg);
+
+ case XFS_IOC_FSGETXATTR:
+ return xfs_ioc_fsgetxattr(ip, 0, arg);
+ case XFS_IOC_FSGETXATTRA:
+ return xfs_ioc_fsgetxattr(ip, 1, arg);
+ case XFS_IOC_FSSETXATTR:
+ return xfs_ioc_fssetxattr(ip, filp, arg);
+ case XFS_IOC_GETXFLAGS:
+ return xfs_ioc_getxflags(ip, arg);
+ case XFS_IOC_SETXFLAGS:
+ return xfs_ioc_setxflags(ip, filp, arg);
+
+ case XFS_IOC_FSSETDM: {
+ struct fsdmidata dmi;
+
+ if (copy_from_user(&dmi, arg, sizeof(dmi)))
+ return -XFS_ERROR(EFAULT);
+
+ error = xfs_set_dmattrs(ip, dmi.fsd_dmevmask,
+ dmi.fsd_dmstate);
+ return -error;
+ }
+
+ case XFS_IOC_GETBMAP:
+ case XFS_IOC_GETBMAPA:
+ return xfs_ioc_getbmap(ip, ioflags, cmd, arg);
+
+ case XFS_IOC_GETBMAPX:
+ return xfs_ioc_getbmapx(ip, arg);
+
+ case XFS_IOC_FD_TO_HANDLE:
+ case XFS_IOC_PATH_TO_HANDLE:
+ case XFS_IOC_PATH_TO_FSHANDLE:
+ return xfs_find_handle(cmd, arg);
+
+ case XFS_IOC_OPEN_BY_HANDLE:
+ return xfs_open_by_handle(mp, arg, filp, inode);
+
+ case XFS_IOC_FSSETDM_BY_HANDLE:
+ return xfs_fssetdm_by_handle(mp, arg, inode);
+
+ case XFS_IOC_READLINK_BY_HANDLE:
+ return xfs_readlink_by_handle(mp, arg, inode);
+
+ case XFS_IOC_ATTRLIST_BY_HANDLE:
+ return xfs_attrlist_by_handle(mp, arg, inode);
+
+ case XFS_IOC_ATTRMULTI_BY_HANDLE:
+ return xfs_attrmulti_by_handle(mp, arg, inode);
+
+ case XFS_IOC_SWAPEXT: {
+ error = xfs_swapext((struct xfs_swapext __user *)arg);
+ return -error;
+ }
+
+ case XFS_IOC_FSCOUNTS: {
+ xfs_fsop_counts_t out;
+
+ error = xfs_fs_counts(mp, &out);
+ if (error)
+ return -error;
+
+ if (copy_to_user(arg, &out, sizeof(out)))
+ return -XFS_ERROR(EFAULT);
+ return 0;
+ }
+
+ case XFS_IOC_SET_RESBLKS: {
+ xfs_fsop_resblks_t inout;
+ __uint64_t in;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&inout, arg, sizeof(inout)))
+ return -XFS_ERROR(EFAULT);
+
+ /* input parameter is passed in resblks field of structure */
+ in = inout.resblks;
+ error = xfs_reserve_blocks(mp, &in, &inout);
+ if (error)
+ return -error;
+
+ if (copy_to_user(arg, &inout, sizeof(inout)))
+ return -XFS_ERROR(EFAULT);
+ return 0;
+ }
+
+ case XFS_IOC_GET_RESBLKS: {
+ xfs_fsop_resblks_t out;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ error = xfs_reserve_blocks(mp, NULL, &out);
+ if (error)
+ return -error;
+
+ if (copy_to_user(arg, &out, sizeof(out)))
+ return -XFS_ERROR(EFAULT);
+
+ return 0;
+ }
+
+ case XFS_IOC_FSGROWFSDATA: {
+ xfs_growfs_data_t in;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&in, arg, sizeof(in)))
+ return -XFS_ERROR(EFAULT);
+
+ error = xfs_growfs_data(mp, &in);
+ return -error;
+ }
+
+ case XFS_IOC_FSGROWFSLOG: {
+ xfs_growfs_log_t in;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&in, arg, sizeof(in)))
+ return -XFS_ERROR(EFAULT);
+
+ error = xfs_growfs_log(mp, &in);
+ return -error;
+ }
+
+ case XFS_IOC_FSGROWFSRT: {
+ xfs_growfs_rt_t in;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&in, arg, sizeof(in)))
+ return -XFS_ERROR(EFAULT);
+
+ error = xfs_growfs_rt(mp, &in);
+ return -error;
+ }
+
+ case XFS_IOC_FREEZE:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (inode->i_sb->s_frozen == SB_UNFROZEN)
+ freeze_bdev(inode->i_sb->s_bdev);
+ return 0;
+
+ case XFS_IOC_THAW:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ if (inode->i_sb->s_frozen != SB_UNFROZEN)
+ thaw_bdev(inode->i_sb->s_bdev, inode->i_sb);
+ return 0;
+
+ case XFS_IOC_GOINGDOWN: {
+ __uint32_t in;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (get_user(in, (__uint32_t __user *)arg))
+ return -XFS_ERROR(EFAULT);
+
+ error = xfs_fs_goingdown(mp, in);
+ return -error;
+ }
+
+ case XFS_IOC_ERROR_INJECTION: {
+ xfs_error_injection_t in;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&in, arg, sizeof(in)))
+ return -XFS_ERROR(EFAULT);
+
+ error = xfs_errortag_add(in.errtag, mp);
+ return -error;
+ }
+
+ case XFS_IOC_ERROR_CLEARALL:
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ error = xfs_errortag_clearall(mp, 1);
+ return -error;
+
+ default:
+ return -ENOTTY;
+ }
+}
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index cc4abd3..0c958cf 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -62,12 +62,11 @@
xfs_synchronize_atime(
xfs_inode_t *ip)
{
- bhv_vnode_t *vp;
+ struct inode *inode = ip->i_vnode;
- vp = XFS_ITOV_NULL(ip);
- if (vp) {
- ip->i_d.di_atime.t_sec = (__int32_t)vp->i_atime.tv_sec;
- ip->i_d.di_atime.t_nsec = (__int32_t)vp->i_atime.tv_nsec;
+ if (inode) {
+ ip->i_d.di_atime.t_sec = (__int32_t)inode->i_atime.tv_sec;
+ ip->i_d.di_atime.t_nsec = (__int32_t)inode->i_atime.tv_nsec;
}
}
@@ -80,11 +79,10 @@
xfs_mark_inode_dirty_sync(
xfs_inode_t *ip)
{
- bhv_vnode_t *vp;
+ struct inode *inode = ip->i_vnode;
- vp = XFS_ITOV_NULL(ip);
- if (vp)
- mark_inode_dirty_sync(vn_to_inode(vp));
+ if (inode)
+ mark_inode_dirty_sync(inode);
}
/*
@@ -215,66 +213,62 @@
*/
STATIC int
xfs_init_security(
- bhv_vnode_t *vp,
+ struct inode *inode,
struct inode *dir)
{
- struct inode *ip = vn_to_inode(vp);
+ struct xfs_inode *ip = XFS_I(inode);
size_t length;
void *value;
char *name;
int error;
- error = security_inode_init_security(ip, dir, &name, &value, &length);
+ error = security_inode_init_security(inode, dir, &name,
+ &value, &length);
if (error) {
if (error == -EOPNOTSUPP)
return 0;
return -error;
}
- error = xfs_attr_set(XFS_I(ip), name, value,
- length, ATTR_SECURE);
+ error = xfs_attr_set(ip, name, value, length, ATTR_SECURE);
if (!error)
- xfs_iflags_set(XFS_I(ip), XFS_IMODIFIED);
+ xfs_iflags_set(ip, XFS_IMODIFIED);
kfree(name);
kfree(value);
return error;
}
-/*
- * Determine whether a process has a valid fs_struct (kernel daemons
- * like knfsd don't have an fs_struct).
- *
- * XXX(hch): nfsd is broken, better fix it instead.
- */
-STATIC_INLINE int
-xfs_has_fs_struct(struct task_struct *task)
+static void
+xfs_dentry_to_name(
+ struct xfs_name *namep,
+ struct dentry *dentry)
{
- return (task->fs != init_task.fs);
+ namep->name = dentry->d_name.name;
+ namep->len = dentry->d_name.len;
}
STATIC void
xfs_cleanup_inode(
struct inode *dir,
- bhv_vnode_t *vp,
+ struct inode *inode,
struct dentry *dentry,
int mode)
{
- struct dentry teardown = {};
+ struct xfs_name teardown;
/* Oh, the horror.
* If we can't add the ACL or we fail in
* xfs_init_security we must back out.
* ENOSPC can hit here, among other things.
*/
- teardown.d_inode = vn_to_inode(vp);
- teardown.d_name = dentry->d_name;
+ xfs_dentry_to_name(&teardown, dentry);
if (S_ISDIR(mode))
- xfs_rmdir(XFS_I(dir), &teardown);
+ xfs_rmdir(XFS_I(dir), &teardown, XFS_I(inode));
else
- xfs_remove(XFS_I(dir), &teardown);
- VN_RELE(vp);
+ xfs_remove(XFS_I(dir), &teardown, XFS_I(inode));
+ iput(inode);
}
STATIC int
@@ -284,9 +278,10 @@
int mode,
dev_t rdev)
{
- struct inode *ip;
- bhv_vnode_t *vp = NULL, *dvp = vn_from_inode(dir);
+ struct inode *inode;
+ struct xfs_inode *ip = NULL;
xfs_acl_t *default_acl = NULL;
+ struct xfs_name name;
attrexists_t test_default_acl = _ACL_DEFAULT_EXISTS;
int error;
@@ -297,59 +292,67 @@
if (unlikely(!sysv_valid_dev(rdev) || MAJOR(rdev) & ~0x1ff))
return -EINVAL;
- if (unlikely(test_default_acl && test_default_acl(dvp))) {
+ if (test_default_acl && test_default_acl(dir)) {
if (!_ACL_ALLOC(default_acl)) {
return -ENOMEM;
}
- if (!_ACL_GET_DEFAULT(dvp, default_acl)) {
+ if (!_ACL_GET_DEFAULT(dir, default_acl)) {
_ACL_FREE(default_acl);
default_acl = NULL;
}
}
- if (IS_POSIXACL(dir) && !default_acl && xfs_has_fs_struct(current))
+ xfs_dentry_to_name(&name, dentry);
+
+ if (IS_POSIXACL(dir) && !default_acl)
mode &= ~current->fs->umask;
switch (mode & S_IFMT) {
- case S_IFCHR: case S_IFBLK: case S_IFIFO: case S_IFSOCK:
+ case S_IFCHR:
+ case S_IFBLK:
+ case S_IFIFO:
+ case S_IFSOCK:
rdev = sysv_encode_dev(rdev);
case S_IFREG:
- error = xfs_create(XFS_I(dir), dentry, mode, rdev, &vp, NULL);
+ error = xfs_create(XFS_I(dir), &name, mode, rdev, &ip, NULL);
break;
case S_IFDIR:
- error = xfs_mkdir(XFS_I(dir), dentry, mode, &vp, NULL);
+ error = xfs_mkdir(XFS_I(dir), &name, mode, &ip, NULL);
break;
default:
error = EINVAL;
break;
}
- if (unlikely(!error)) {
- error = xfs_init_security(vp, dir);
- if (error)
- xfs_cleanup_inode(dir, vp, dentry, mode);
- }
+ if (unlikely(error))
+ goto out_free_acl;
- if (unlikely(default_acl)) {
- if (!error) {
- error = _ACL_INHERIT(vp, mode, default_acl);
- if (!error)
- xfs_iflags_set(XFS_I(vp), XFS_IMODIFIED);
- else
- xfs_cleanup_inode(dir, vp, dentry, mode);
- }
+ inode = ip->i_vnode;
+
+ error = xfs_init_security(inode, dir);
+ if (unlikely(error))
+ goto out_cleanup_inode;
+
+ if (default_acl) {
+ error = _ACL_INHERIT(inode, mode, default_acl);
+ if (unlikely(error))
+ goto out_cleanup_inode;
+ xfs_iflags_set(ip, XFS_IMODIFIED);
_ACL_FREE(default_acl);
}
- if (likely(!error)) {
- ASSERT(vp);
- ip = vn_to_inode(vp);
- if (S_ISDIR(mode))
- xfs_validate_fields(ip);
- d_instantiate(dentry, ip);
- xfs_validate_fields(dir);
- }
+ if (S_ISDIR(mode))
+ xfs_validate_fields(inode);
+ d_instantiate(dentry, inode);
+ xfs_validate_fields(dir);
+ return -error;
+
+ out_cleanup_inode:
+ xfs_cleanup_inode(dir, inode, dentry, mode);
+ out_free_acl:
+ if (default_acl)
+ _ACL_FREE(default_acl);
return -error;
}
@@ -378,13 +381,15 @@
struct dentry *dentry,
struct nameidata *nd)
{
- bhv_vnode_t *cvp;
+ struct xfs_inode *cip;
+ struct xfs_name name;
int error;
if (dentry->d_name.len >= MAXNAMELEN)
return ERR_PTR(-ENAMETOOLONG);
- error = xfs_lookup(XFS_I(dir), dentry, &cvp);
+ xfs_dentry_to_name(&name, dentry);
+ error = xfs_lookup(XFS_I(dir), &name, &cip);
if (unlikely(error)) {
if (unlikely(error != ENOENT))
return ERR_PTR(-error);
@@ -392,7 +397,7 @@
return NULL;
}
- return d_splice_alias(vn_to_inode(cvp), dentry);
+ return d_splice_alias(cip->i_vnode, dentry);
}
STATIC int
@@ -401,23 +406,24 @@
struct inode *dir,
struct dentry *dentry)
{
- struct inode *ip; /* inode of guy being linked to */
- bhv_vnode_t *vp; /* vp of name being linked */
+ struct inode *inode; /* inode of guy being linked to */
+ struct xfs_name name;
int error;
- ip = old_dentry->d_inode; /* inode being linked to */
- vp = vn_from_inode(ip);
+ inode = old_dentry->d_inode;
+ xfs_dentry_to_name(&name, dentry);
- VN_HOLD(vp);
- error = xfs_link(XFS_I(dir), vp, dentry);
+ igrab(inode);
+ error = xfs_link(XFS_I(dir), XFS_I(inode), &name);
if (unlikely(error)) {
- VN_RELE(vp);
- } else {
- xfs_iflags_set(XFS_I(dir), XFS_IMODIFIED);
- xfs_validate_fields(ip);
- d_instantiate(dentry, ip);
+ iput(inode);
+ return -error;
}
- return -error;
+
+ xfs_iflags_set(XFS_I(dir), XFS_IMODIFIED);
+ xfs_validate_fields(inode);
+ d_instantiate(dentry, inode);
+ return 0;
}
STATIC int
@@ -426,11 +432,13 @@
struct dentry *dentry)
{
struct inode *inode;
+ struct xfs_name name;
int error;
inode = dentry->d_inode;
+ xfs_dentry_to_name(&name, dentry);
- error = xfs_remove(XFS_I(dir), dentry);
+ error = xfs_remove(XFS_I(dir), &name, XFS_I(inode));
if (likely(!error)) {
xfs_validate_fields(dir); /* size needs update */
xfs_validate_fields(inode);
@@ -444,29 +452,34 @@
struct dentry *dentry,
const char *symname)
{
- struct inode *ip;
- bhv_vnode_t *cvp; /* used to lookup symlink to put in dentry */
+ struct inode *inode;
+ struct xfs_inode *cip = NULL;
+ struct xfs_name name;
int error;
mode_t mode;
- cvp = NULL;
-
mode = S_IFLNK |
(irix_symlink_mode ? 0777 & ~current->fs->umask : S_IRWXUGO);
+ xfs_dentry_to_name(&name, dentry);
- error = xfs_symlink(XFS_I(dir), dentry, (char *)symname, mode,
- &cvp, NULL);
- if (likely(!error && cvp)) {
- error = xfs_init_security(cvp, dir);
- if (likely(!error)) {
- ip = vn_to_inode(cvp);
- d_instantiate(dentry, ip);
- xfs_validate_fields(dir);
- xfs_validate_fields(ip);
- } else {
- xfs_cleanup_inode(dir, cvp, dentry, 0);
- }
- }
+ error = xfs_symlink(XFS_I(dir), &name, symname, mode, &cip, NULL);
+ if (unlikely(error))
+ goto out;
+
+ inode = cip->i_vnode;
+
+ error = xfs_init_security(inode, dir);
+ if (unlikely(error))
+ goto out_cleanup_inode;
+
+ d_instantiate(dentry, inode);
+ xfs_validate_fields(dir);
+ xfs_validate_fields(inode);
+ return 0;
+
+ out_cleanup_inode:
+ xfs_cleanup_inode(dir, inode, dentry, 0);
+ out:
return -error;
}
@@ -476,9 +489,12 @@
struct dentry *dentry)
{
struct inode *inode = dentry->d_inode;
+ struct xfs_name name;
int error;
- error = xfs_rmdir(XFS_I(dir), dentry);
+ xfs_dentry_to_name(&name, dentry);
+
+ error = xfs_rmdir(XFS_I(dir), &name, XFS_I(inode));
if (likely(!error)) {
xfs_validate_fields(inode);
xfs_validate_fields(dir);
@@ -494,12 +510,15 @@
struct dentry *ndentry)
{
struct inode *new_inode = ndentry->d_inode;
- bhv_vnode_t *tvp; /* target directory */
+ struct xfs_name oname;
+ struct xfs_name nname;
int error;
- tvp = vn_from_inode(ndir);
+ xfs_dentry_to_name(&oname, odentry);
+ xfs_dentry_to_name(&nname, ndentry);
- error = xfs_rename(XFS_I(odir), odentry, tvp, ndentry);
+ error = xfs_rename(XFS_I(odir), &oname, XFS_I(odentry->d_inode),
+ XFS_I(ndir), &nname);
if (likely(!error)) {
if (new_inode)
xfs_validate_fields(new_inode);
@@ -700,11 +719,19 @@
return -error;
}
+/*
+ * block_truncate_page can return an error, but we can't propagate it
+ * at all here. Leave a complaint + stack trace in the syslog because
+ * this could be bad. If it is bad, we need to propagate the error further.
+ */
STATIC void
xfs_vn_truncate(
struct inode *inode)
{
- block_truncate_page(inode->i_mapping, inode->i_size, xfs_get_blocks);
+ int error;
+ error = block_truncate_page(inode->i_mapping, inode->i_size,
+ xfs_get_blocks);
+ WARN_ON(error);
}
STATIC int
diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h
index 3ca39c4..e514332 100644
--- a/fs/xfs/linux-2.6/xfs_linux.h
+++ b/fs/xfs/linux-2.6/xfs_linux.h
@@ -99,7 +99,6 @@
/*
* Feature macros (disable/enable)
*/
-#undef HAVE_REFCACHE /* reference cache not needed for NFS in 2.6 */
#define HAVE_SPLICE /* a splice(2) exists in 2.6, but not in 2.4 */
#ifdef CONFIG_SMP
#define HAVE_PERCPU_SB /* per cpu superblock counters are a 2.6 feature */
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 1663533..21c0dbc 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -176,7 +176,6 @@
{
struct file *file = iocb->ki_filp;
struct inode *inode = file->f_mapping->host;
- bhv_vnode_t *vp = XFS_ITOV(ip);
xfs_mount_t *mp = ip->i_mount;
size_t size = 0;
ssize_t ret = 0;
@@ -228,11 +227,11 @@
xfs_ilock(ip, XFS_IOLOCK_SHARED);
if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) && !(ioflags & IO_INVIS)) {
- bhv_vrwlock_t locktype = VRWLOCK_READ;
int dmflags = FILP_DELAY_FLAG(file) | DM_SEM_FLAG_RD(ioflags);
+ int iolock = XFS_IOLOCK_SHARED;
- ret = -XFS_SEND_DATA(mp, DM_EVENT_READ, vp, *offset, size,
- dmflags, &locktype);
+ ret = -XFS_SEND_DATA(mp, DM_EVENT_READ, ip, *offset, size,
+ dmflags, &iolock);
if (ret) {
xfs_iunlock(ip, XFS_IOLOCK_SHARED);
if (unlikely(ioflags & IO_ISDIRECT))
@@ -242,7 +241,7 @@
}
if (unlikely(ioflags & IO_ISDIRECT)) {
- if (VN_CACHED(vp))
+ if (inode->i_mapping->nrpages)
ret = xfs_flushinval_pages(ip, (*offset & PAGE_CACHE_MASK),
-1, FI_REMAPF_LOCKED);
mutex_unlock(&inode->i_mutex);
@@ -276,7 +275,6 @@
int flags,
int ioflags)
{
- bhv_vnode_t *vp = XFS_ITOV(ip);
xfs_mount_t *mp = ip->i_mount;
ssize_t ret;
@@ -287,11 +285,11 @@
xfs_ilock(ip, XFS_IOLOCK_SHARED);
if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) && !(ioflags & IO_INVIS)) {
- bhv_vrwlock_t locktype = VRWLOCK_READ;
+ int iolock = XFS_IOLOCK_SHARED;
int error;
- error = XFS_SEND_DATA(mp, DM_EVENT_READ, vp, *ppos, count,
- FILP_DELAY_FLAG(infilp), &locktype);
+ error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, *ppos, count,
+ FILP_DELAY_FLAG(infilp), &iolock);
if (error) {
xfs_iunlock(ip, XFS_IOLOCK_SHARED);
return -error;
@@ -317,7 +315,6 @@
int flags,
int ioflags)
{
- bhv_vnode_t *vp = XFS_ITOV(ip);
xfs_mount_t *mp = ip->i_mount;
ssize_t ret;
struct inode *inode = outfilp->f_mapping->host;
@@ -330,11 +327,11 @@
xfs_ilock(ip, XFS_IOLOCK_EXCL);
if (DM_EVENT_ENABLED(ip, DM_EVENT_WRITE) && !(ioflags & IO_INVIS)) {
- bhv_vrwlock_t locktype = VRWLOCK_WRITE;
+ int iolock = XFS_IOLOCK_EXCL;
int error;
- error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, vp, *ppos, count,
- FILP_DELAY_FLAG(outfilp), &locktype);
+ error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, ip, *ppos, count,
+ FILP_DELAY_FLAG(outfilp), &iolock);
if (error) {
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
return -error;
@@ -573,14 +570,12 @@
struct file *file = iocb->ki_filp;
struct address_space *mapping = file->f_mapping;
struct inode *inode = mapping->host;
- bhv_vnode_t *vp = XFS_ITOV(xip);
unsigned long segs = nsegs;
xfs_mount_t *mp;
ssize_t ret = 0, error = 0;
xfs_fsize_t isize, new_size;
int iolock;
int eventsent = 0;
- bhv_vrwlock_t locktype;
size_t ocount = 0, count;
loff_t pos;
int need_i_mutex;
@@ -607,11 +602,9 @@
relock:
if (ioflags & IO_ISDIRECT) {
iolock = XFS_IOLOCK_SHARED;
- locktype = VRWLOCK_WRITE_DIRECT;
need_i_mutex = 0;
} else {
iolock = XFS_IOLOCK_EXCL;
- locktype = VRWLOCK_WRITE;
need_i_mutex = 1;
mutex_lock(&inode->i_mutex);
}
@@ -634,9 +627,8 @@
dmflags |= DM_FLAGS_IMUX;
xfs_iunlock(xip, XFS_ILOCK_EXCL);
- error = XFS_SEND_DATA(xip->i_mount, DM_EVENT_WRITE, vp,
- pos, count,
- dmflags, &locktype);
+ error = XFS_SEND_DATA(xip->i_mount, DM_EVENT_WRITE, xip,
+ pos, count, dmflags, &iolock);
if (error) {
goto out_unlock_internal;
}
@@ -664,10 +656,9 @@
return XFS_ERROR(-EINVAL);
}
- if (!need_i_mutex && (VN_CACHED(vp) || pos > xip->i_size)) {
+ if (!need_i_mutex && (mapping->nrpages || pos > xip->i_size)) {
xfs_iunlock(xip, XFS_ILOCK_EXCL|iolock);
iolock = XFS_IOLOCK_EXCL;
- locktype = VRWLOCK_WRITE;
need_i_mutex = 1;
mutex_lock(&inode->i_mutex);
xfs_ilock(xip, XFS_ILOCK_EXCL|iolock);
@@ -727,7 +718,7 @@
current->backing_dev_info = mapping->backing_dev_info;
if ((ioflags & IO_ISDIRECT)) {
- if (VN_CACHED(vp)) {
+ if (mapping->nrpages) {
WARN_ON(need_i_mutex == 0);
xfs_inval_cached_trace(xip, pos, -1,
(pos & PAGE_CACHE_MASK), -1);
@@ -744,7 +735,6 @@
mutex_unlock(&inode->i_mutex);
iolock = XFS_IOLOCK_SHARED;
- locktype = VRWLOCK_WRITE_DIRECT;
need_i_mutex = 0;
}
@@ -781,15 +771,15 @@
if (ret == -ENOSPC &&
DM_EVENT_ENABLED(xip, DM_EVENT_NOSPACE) && !(ioflags & IO_INVIS)) {
- xfs_rwunlock(xip, locktype);
+ xfs_iunlock(xip, iolock);
if (need_i_mutex)
mutex_unlock(&inode->i_mutex);
- error = XFS_SEND_NAMESP(xip->i_mount, DM_EVENT_NOSPACE, vp,
- DM_RIGHT_NULL, vp, DM_RIGHT_NULL, NULL, NULL,
+ error = XFS_SEND_NAMESP(xip->i_mount, DM_EVENT_NOSPACE, xip,
+ DM_RIGHT_NULL, xip, DM_RIGHT_NULL, NULL, NULL,
0, 0, 0); /* Delay flag intentionally unused */
if (need_i_mutex)
mutex_lock(&inode->i_mutex);
- xfs_rwlock(xip, locktype);
+ xfs_ilock(xip, iolock);
if (error)
goto out_unlock_internal;
pos = xip->i_size;
@@ -817,7 +807,8 @@
/* Handle various SYNC-type writes */
if ((file->f_flags & O_SYNC) || IS_SYNC(inode)) {
int error2;
- xfs_rwunlock(xip, locktype);
+
+ xfs_iunlock(xip, iolock);
if (need_i_mutex)
mutex_unlock(&inode->i_mutex);
error2 = sync_page_range(inode, mapping, pos, ret);
@@ -825,7 +816,7 @@
error = error2;
if (need_i_mutex)
mutex_lock(&inode->i_mutex);
- xfs_rwlock(xip, locktype);
+ xfs_ilock(xip, iolock);
error2 = xfs_write_sync_logforce(mp, xip);
if (!error)
error = error2;
@@ -846,7 +837,7 @@
xip->i_d.di_size = xip->i_size;
xfs_iunlock(xip, XFS_ILOCK_EXCL);
}
- xfs_rwunlock(xip, locktype);
+ xfs_iunlock(xip, iolock);
out_unlock_mutex:
if (need_i_mutex)
mutex_unlock(&inode->i_mutex);
@@ -884,28 +875,23 @@
}
/*
- * Wrapper around bdstrat so that we can stop data
- * from going to disk in case we are shutting down the filesystem.
- * Typically user data goes thru this path; one of the exceptions
- * is the superblock.
+ * Wrapper around bdstrat so that we can stop data from going to disk in case
+ * we are shutting down the filesystem. Typically user data goes thru this
+ * path; one of the exceptions is the superblock.
*/
-int
+void
xfsbdstrat(
struct xfs_mount *mp,
struct xfs_buf *bp)
{
ASSERT(mp);
if (!XFS_FORCED_SHUTDOWN(mp)) {
- /* Grio redirection would go here
- * if (XFS_BUF_IS_GRIO(bp)) {
- */
-
xfs_buf_iorequest(bp);
- return 0;
+ return;
}
xfs_buftrace("XFSBDSTRAT IOERROR", bp);
- return (xfs_bioerror_relse(bp));
+ xfs_bioerror_relse(bp);
}
/*
diff --git a/fs/xfs/linux-2.6/xfs_lrw.h b/fs/xfs/linux-2.6/xfs_lrw.h
index e200253..e1d498b 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.h
+++ b/fs/xfs/linux-2.6/xfs_lrw.h
@@ -68,7 +68,8 @@
#define xfs_inval_cached_trace(ip, offset, len, first, last)
#endif
-extern int xfsbdstrat(struct xfs_mount *, struct xfs_buf *);
+/* errors from xfsbdstrat() must be extracted from the buffer */
+extern void xfsbdstrat(struct xfs_mount *, struct xfs_buf *);
extern int xfs_bdstrat_cb(struct xfs_buf *);
extern int xfs_dev_is_read_only(struct xfs_mount *, char *);
diff --git a/fs/xfs/linux-2.6/xfs_stats.h b/fs/xfs/linux-2.6/xfs_stats.h
index 8ba7a2f..afd0b0d 100644
--- a/fs/xfs/linux-2.6/xfs_stats.h
+++ b/fs/xfs/linux-2.6/xfs_stats.h
@@ -144,8 +144,8 @@
# define XFS_STATS_DEC(count)
# define XFS_STATS_ADD(count, inc)
-static __inline void xfs_init_procfs(void) { };
-static __inline void xfs_cleanup_procfs(void) { };
+static inline void xfs_init_procfs(void) { };
+static inline void xfs_cleanup_procfs(void) { };
#endif /* !CONFIG_PROC_FS */
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 8831d95..865eb70 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -896,7 +896,8 @@
struct inode *inode,
int sync)
{
- int error = 0, flags = FLUSH_INODE;
+ int error = 0;
+ int flags = 0;
xfs_itrace_entry(XFS_I(inode));
if (sync) {
@@ -934,7 +935,7 @@
xfs_inactive(ip);
xfs_iflags_clear(ip, XFS_IMODIFIED);
if (xfs_reclaim(ip))
- panic("%s: cannot reclaim 0x%p\n", __FUNCTION__, inode);
+ panic("%s: cannot reclaim 0x%p\n", __func__, inode);
}
ASSERT(XFS_I(inode) == NULL);
@@ -1027,8 +1028,7 @@
int error;
if (!(mp->m_flags & XFS_MOUNT_RDONLY))
- error = xfs_sync(mp, SYNC_FSDATA | SYNC_BDFLUSH | SYNC_ATTR |
- SYNC_REFCACHE | SYNC_SUPER);
+ error = xfs_sync(mp, SYNC_FSDATA | SYNC_BDFLUSH | SYNC_ATTR);
mp->m_sync_seq++;
wake_up(&mp->m_wait_single_sync_task);
}
@@ -1306,7 +1306,7 @@
void *data,
int silent)
{
- struct inode *rootvp;
+ struct inode *root;
struct xfs_mount *mp = NULL;
struct xfs_mount_args *args = xfs_args_allocate(sb, silent);
int error;
@@ -1344,19 +1344,18 @@
sb->s_time_gran = 1;
set_posix_acl_flag(sb);
- rootvp = igrab(mp->m_rootip->i_vnode);
- if (!rootvp) {
+ root = igrab(mp->m_rootip->i_vnode);
+ if (!root) {
error = ENOENT;
goto fail_unmount;
}
-
- sb->s_root = d_alloc_root(vn_to_inode(rootvp));
- if (!sb->s_root) {
- error = ENOMEM;
+ if (is_bad_inode(root)) {
+ error = EINVAL;
goto fail_vnrele;
}
- if (is_bad_inode(sb->s_root->d_inode)) {
- error = EINVAL;
+ sb->s_root = d_alloc_root(root);
+ if (!sb->s_root) {
+ error = ENOMEM;
goto fail_vnrele;
}
@@ -1378,7 +1377,7 @@
dput(sb->s_root);
sb->s_root = NULL;
} else {
- VN_RELE(rootvp);
+ iput(root);
}
fail_unmount:
diff --git a/fs/xfs/linux-2.6/xfs_super.h b/fs/xfs/linux-2.6/xfs_super.h
index 3efcf45..3efb7c6 100644
--- a/fs/xfs/linux-2.6/xfs_super.h
+++ b/fs/xfs/linux-2.6/xfs_super.h
@@ -50,13 +50,7 @@
# define set_posix_acl_flag(sb) do { } while (0)
#endif
-#ifdef CONFIG_XFS_SECURITY
-# define XFS_SECURITY_STRING "security attributes, "
-# define ENOSECURITY 0
-#else
-# define XFS_SECURITY_STRING
-# define ENOSECURITY EOPNOTSUPP
-#endif
+#define XFS_SECURITY_STRING "security attributes, "
#ifdef CONFIG_XFS_RT
# define XFS_REALTIME_STRING "realtime, "
diff --git a/fs/xfs/linux-2.6/xfs_vfs.h b/fs/xfs/linux-2.6/xfs_vfs.h
index 4da03a4..7e60c77 100644
--- a/fs/xfs/linux-2.6/xfs_vfs.h
+++ b/fs/xfs/linux-2.6/xfs_vfs.h
@@ -49,7 +49,6 @@
#define SYNC_REFCACHE 0x0040 /* prune some of the nfs ref cache */
#define SYNC_REMOUNT 0x0080 /* remount readonly, no dummy LRs */
#define SYNC_IOWAIT 0x0100 /* wait for all I/O to complete */
-#define SYNC_SUPER 0x0200 /* flush superblock to disk */
/*
* When remounting a filesystem read-only or freezing the filesystem,
diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h
index b5ea418..8b4d63c 100644
--- a/fs/xfs/linux-2.6/xfs_vnode.h
+++ b/fs/xfs/linux-2.6/xfs_vnode.h
@@ -23,8 +23,6 @@
struct xfs_iomap;
struct attrlist_cursor_kern;
-typedef struct dentry bhv_vname_t;
-typedef __u64 bhv_vnumber_t;
typedef struct inode bhv_vnode_t;
#define VN_ISLNK(vp) S_ISLNK((vp)->i_mode)
@@ -46,18 +44,6 @@
}
/*
- * Values for the vop_rwlock/rwunlock flags parameter.
- */
-typedef enum bhv_vrwlock {
- VRWLOCK_NONE,
- VRWLOCK_READ,
- VRWLOCK_WRITE,
- VRWLOCK_WRITE_DIRECT,
- VRWLOCK_TRY_READ,
- VRWLOCK_TRY_WRITE
-} bhv_vrwlock_t;
-
-/*
* Return values for xfs_inactive. A return value of
* VN_INACTIVE_NOCACHE implies that the file system behavior
* has disassociated its state and bhv_desc_t from the vnode.
@@ -73,12 +59,9 @@
#define IO_INVIS 0x00020 /* don't update inode timestamps */
/*
- * Flags for vop_iflush call
+ * Flags for xfs_inode_flush
*/
#define FLUSH_SYNC 1 /* wait for flush to complete */
-#define FLUSH_INODE 2 /* flush the inode itself */
-#define FLUSH_LOG 4 /* force the last log entry for
- * this inode out to disk */
/*
* Flush/Invalidate options for vop_toss/flush/flushinval_pages.
@@ -226,13 +209,6 @@
}
/*
- * Vname handling macros.
- */
-#define VNAME(dentry) ((char *) (dentry)->d_name.name)
-#define VNAMELEN(dentry) ((dentry)->d_name.len)
-#define VNAME_TO_VNODE(dentry) (vn_from_inode((dentry)->d_inode))
-
-/*
* Dealing with bad inodes
*/
static inline int VN_BAD(bhv_vnode_t *vp)
@@ -303,9 +279,9 @@
extern void _xfs_itrace_ref(struct xfs_inode *, char *, int, inst_t *);
extern void xfs_itrace_rele(struct xfs_inode *, char *, int, inst_t *);
#define xfs_itrace_entry(ip) \
- _xfs_itrace_entry(ip, __FUNCTION__, (inst_t *)__return_address)
+ _xfs_itrace_entry(ip, __func__, (inst_t *)__return_address)
#define xfs_itrace_exit(ip) \
- _xfs_itrace_exit(ip, __FUNCTION__, (inst_t *)__return_address)
+ _xfs_itrace_exit(ip, __func__, (inst_t *)__return_address)
#define xfs_itrace_exit_tag(ip, tag) \
_xfs_itrace_exit(ip, tag, (inst_t *)__return_address)
#define xfs_itrace_ref(ip) \
diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c
index 665babc..631ebb3 100644
--- a/fs/xfs/quota/xfs_dquot.c
+++ b/fs/xfs/quota/xfs_dquot.c
@@ -1291,7 +1291,7 @@
if (flags & XFS_QMOPT_DELWRI) {
xfs_bdwrite(mp, bp);
} else if (flags & XFS_QMOPT_ASYNC) {
- xfs_bawrite(mp, bp);
+ error = xfs_bawrite(mp, bp);
} else {
error = xfs_bwrite(mp, bp);
}
@@ -1439,9 +1439,7 @@
uint flags)
{
xfs_dqhash_t *thishash;
- xfs_mount_t *mp;
-
- mp = dqp->q_mount;
+ xfs_mount_t *mp = dqp->q_mount;
ASSERT(XFS_QM_IS_MPLIST_LOCKED(mp));
ASSERT(XFS_DQ_IS_HASH_LOCKED(dqp->q_hash));
@@ -1485,6 +1483,7 @@
* we're unmounting, we do care, so we flush it and wait.
*/
if (XFS_DQ_IS_DIRTY(dqp)) {
+ int error;
xfs_dqtrace_entry(dqp, "DQPURGE ->DQFLUSH: DQDIRTY");
/* dqflush unlocks dqflock */
/*
@@ -1495,7 +1494,10 @@
* We don't care about getting disk errors here. We need
* to purge this dquot anyway, so we go ahead regardless.
*/
- (void) xfs_qm_dqflush(dqp, XFS_QMOPT_SYNC);
+ error = xfs_qm_dqflush(dqp, XFS_QMOPT_SYNC);
+ if (error)
+ xfs_fs_cmn_err(CE_WARN, mp,
+ "xfs_qm_dqpurge: dquot %p flush failed", dqp);
xfs_dqflock(dqp);
}
ASSERT(dqp->q_pincount == 0);
@@ -1580,12 +1582,18 @@
XFS_INCORE_TRYLOCK);
if (bp != NULL) {
if (XFS_BUF_ISDELAYWRITE(bp)) {
+ int error;
if (XFS_BUF_ISPINNED(bp)) {
xfs_log_force(dqp->q_mount,
(xfs_lsn_t)0,
XFS_LOG_FORCE);
}
- xfs_bawrite(dqp->q_mount, bp);
+ error = xfs_bawrite(dqp->q_mount, bp);
+ if (error)
+ xfs_fs_cmn_err(CE_WARN, dqp->q_mount,
+ "xfs_qm_dqflock_pushbuf_wait: "
+ "pushbuf error %d on dqp %p, bp %p",
+ error, dqp, bp);
} else {
xfs_buf_relse(bp);
}
diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/quota/xfs_dquot_item.c
index 1800e8d..36e05ca 100644
--- a/fs/xfs/quota/xfs_dquot_item.c
+++ b/fs/xfs/quota/xfs_dquot_item.c
@@ -146,6 +146,7 @@
xfs_dq_logitem_t *logitem)
{
xfs_dquot_t *dqp;
+ int error;
dqp = logitem->qli_dquot;
@@ -161,7 +162,11 @@
* lock without sleeping, then there must not have been
* anyone in the process of flushing the dquot.
*/
- xfs_qm_dqflush(dqp, XFS_B_DELWRI);
+ error = xfs_qm_dqflush(dqp, XFS_QMOPT_DELWRI);
+ if (error)
+ xfs_fs_cmn_err(CE_WARN, dqp->q_mount,
+ "xfs_qm_dquot_logitem_push: push error %d on dqp %p",
+ error, dqp);
xfs_dqunlock(dqp);
}
@@ -262,11 +267,16 @@
XFS_LOG_FORCE);
}
if (dopush) {
+ int error;
#ifdef XFSRACEDEBUG
delay_for_intr();
delay(300);
#endif
- xfs_bawrite(mp, bp);
+ error = xfs_bawrite(mp, bp);
+ if (error)
+ xfs_fs_cmn_err(CE_WARN, mp,
+ "xfs_qm_dquot_logitem_pushbuf: pushbuf error %d on qip %p, bp %p",
+ error, qip, bp);
} else {
xfs_buf_relse(bp);
}
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 1f3da5b..40ea564 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -304,8 +304,11 @@
* necessary data structures like quotainfo. This is also responsible for
* running a quotacheck as necessary. We are guaranteed that the superblock
* is consistently read in at this point.
+ *
+ * If we fail here, the mount will continue with quota turned off. We don't
+ * need to inidicate success or failure at all.
*/
-int
+void
xfs_qm_mount_quotas(
xfs_mount_t *mp,
int mfsi_flags)
@@ -313,7 +316,6 @@
int error = 0;
uint sbf;
-
/*
* If quotas on realtime volumes is not supported, we disable
* quotas immediately.
@@ -332,7 +334,8 @@
* Allocate the quotainfo structure inside the mount struct, and
* create quotainode(s), and change/rev superblock if necessary.
*/
- if ((error = xfs_qm_init_quotainfo(mp))) {
+ error = xfs_qm_init_quotainfo(mp);
+ if (error) {
/*
* We must turn off quotas.
*/
@@ -344,12 +347,11 @@
* If any of the quotas are not consistent, do a quotacheck.
*/
if (XFS_QM_NEED_QUOTACHECK(mp) &&
- !(mfsi_flags & XFS_MFSI_NO_QUOTACHECK)) {
- if ((error = xfs_qm_quotacheck(mp))) {
- /* Quotacheck has failed and quotas have
- * been disabled.
- */
- return XFS_ERROR(error);
+ !(mfsi_flags & XFS_MFSI_NO_QUOTACHECK)) {
+ error = xfs_qm_quotacheck(mp);
+ if (error) {
+ /* Quotacheck failed and disabled quotas. */
+ return;
}
}
/*
@@ -357,12 +359,10 @@
* quotachecked status, since we won't be doing accounting for
* that type anymore.
*/
- if (!XFS_IS_UQUOTA_ON(mp)) {
+ if (!XFS_IS_UQUOTA_ON(mp))
mp->m_qflags &= ~XFS_UQUOTA_CHKD;
- }
- if (!(XFS_IS_GQUOTA_ON(mp) || XFS_IS_PQUOTA_ON(mp))) {
+ if (!(XFS_IS_GQUOTA_ON(mp) || XFS_IS_PQUOTA_ON(mp)))
mp->m_qflags &= ~XFS_OQUOTA_CHKD;
- }
write_changes:
/*
@@ -392,7 +392,7 @@
xfs_fs_cmn_err(CE_WARN, mp,
"Failed to initialize disk quotas.");
}
- return XFS_ERROR(error);
+ return;
}
/*
@@ -1405,13 +1405,13 @@
#if defined(DEBUG) && defined(XFS_LOUD_RECOVERY)
unsigned oldv = mp->m_sb.sb_versionnum;
#endif
- ASSERT(!XFS_SB_VERSION_HASQUOTA(&mp->m_sb));
+ ASSERT(!xfs_sb_version_hasquota(&mp->m_sb));
ASSERT((sbfields & (XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO |
XFS_SB_GQUOTINO | XFS_SB_QFLAGS)) ==
(XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO |
XFS_SB_GQUOTINO | XFS_SB_QFLAGS));
- XFS_SB_VERSION_ADDQUOTA(&mp->m_sb);
+ xfs_sb_version_addquota(&mp->m_sb);
mp->m_sb.sb_uquotino = NULLFSINO;
mp->m_sb.sb_gquotino = NULLFSINO;
@@ -1438,7 +1438,7 @@
}
-STATIC int
+STATIC void
xfs_qm_reset_dqcounts(
xfs_mount_t *mp,
xfs_buf_t *bp,
@@ -1478,8 +1478,6 @@
ddq->d_rtbwarns = 0;
ddq = (xfs_disk_dquot_t *) ((xfs_dqblk_t *)ddq + 1);
}
-
- return 0;
}
STATIC int
@@ -1520,7 +1518,7 @@
if (error)
break;
- (void) xfs_qm_reset_dqcounts(mp, bp, firstid, type);
+ xfs_qm_reset_dqcounts(mp, bp, firstid, type);
xfs_bdwrite(mp, bp);
/*
* goto the next block.
@@ -1810,7 +1808,7 @@
* Now release the inode. This will send it to 'inactive', and
* possibly even free blocks.
*/
- VN_RELE(XFS_ITOV(ip));
+ IRELE(ip);
/*
* Goto next inode.
@@ -1880,6 +1878,14 @@
} while (! done);
/*
+ * We've made all the changes that we need to make incore.
+ * Flush them down to disk buffers if everything was updated
+ * successfully.
+ */
+ if (!error)
+ error = xfs_qm_dqflush_all(mp, XFS_QMOPT_DELWRI);
+
+ /*
* We can get this error if we couldn't do a dquot allocation inside
* xfs_qm_dqusage_adjust (via bulkstat). We don't care about the
* dirty dquots that might be cached, we just want to get rid of them
@@ -1890,11 +1896,6 @@
xfs_qm_dqpurge_all(mp, XFS_QMOPT_QUOTALL | XFS_QMOPT_QUOTAOFF);
goto error_return;
}
- /*
- * We've made all the changes that we need to make incore.
- * Now flush_them down to disk buffers.
- */
- xfs_qm_dqflush_all(mp, XFS_QMOPT_DELWRI);
/*
* We didn't log anything, because if we crashed, we'll have to
@@ -1926,7 +1927,10 @@
ASSERT(mp->m_quotainfo != NULL);
ASSERT(xfs_Gqm != NULL);
xfs_qm_destroy_quotainfo(mp);
- (void)xfs_mount_reset_sbqflags(mp);
+ if (xfs_mount_reset_sbqflags(mp)) {
+ cmn_err(CE_WARN, "XFS quotacheck %s: "
+ "Failed to reset quota flags.", mp->m_fsname);
+ }
} else {
cmn_err(CE_NOTE, "XFS quotacheck %s: Done.", mp->m_fsname);
}
@@ -1954,7 +1958,7 @@
/*
* Get the uquota and gquota inodes
*/
- if (XFS_SB_VERSION_HASQUOTA(&mp->m_sb)) {
+ if (xfs_sb_version_hasquota(&mp->m_sb)) {
if (XFS_IS_UQUOTA_ON(mp) &&
mp->m_sb.sb_uquotino != NULLFSINO) {
ASSERT(mp->m_sb.sb_uquotino > 0);
@@ -1968,7 +1972,7 @@
if ((error = xfs_iget(mp, NULL, mp->m_sb.sb_gquotino,
0, 0, &gip, 0))) {
if (uip)
- VN_RELE(XFS_ITOV(uip));
+ IRELE(uip);
return XFS_ERROR(error);
}
}
@@ -1999,7 +2003,7 @@
sbflags | XFS_SB_GQUOTINO, flags);
if (error) {
if (uip)
- VN_RELE(XFS_ITOV(uip));
+ IRELE(uip);
return XFS_ERROR(error);
}
@@ -2093,12 +2097,17 @@
* dirty dquots.
*/
if (XFS_DQ_IS_DIRTY(dqp)) {
+ int error;
xfs_dqtrace_entry(dqp, "DQSHAKE: DQDIRTY");
/*
* We flush it delayed write, so don't bother
* releasing the mplock.
*/
- (void) xfs_qm_dqflush(dqp, XFS_QMOPT_DELWRI);
+ error = xfs_qm_dqflush(dqp, XFS_QMOPT_DELWRI);
+ if (error) {
+ xfs_fs_cmn_err(CE_WARN, dqp->q_mount,
+ "xfs_qm_dqflush_all: dquot %p flush failed", dqp);
+ }
xfs_dqunlock(dqp); /* dqflush unlocks dqflock */
dqp = dqp->dq_flnext;
continue;
@@ -2265,12 +2274,17 @@
* dirty dquots.
*/
if (XFS_DQ_IS_DIRTY(dqp)) {
+ int error;
xfs_dqtrace_entry(dqp, "DQRECLAIM: DQDIRTY");
/*
* We flush it delayed write, so don't bother
* releasing the freelist lock.
*/
- (void) xfs_qm_dqflush(dqp, XFS_QMOPT_DELWRI);
+ error = xfs_qm_dqflush(dqp, XFS_QMOPT_DELWRI);
+ if (error) {
+ xfs_fs_cmn_err(CE_WARN, dqp->q_mount,
+ "xfs_qm_dqreclaim: dquot %p flush failed", dqp);
+ }
xfs_dqunlock(dqp); /* dqflush unlocks dqflock */
continue;
}
@@ -2378,9 +2392,9 @@
}
xfs_mod_sb(tp, flags);
- (void) xfs_trans_commit(tp, 0);
+ error = xfs_trans_commit(tp, 0);
- return 0;
+ return error;
}
diff --git a/fs/xfs/quota/xfs_qm.h b/fs/xfs/quota/xfs_qm.h
index baf537c..cd2300e 100644
--- a/fs/xfs/quota/xfs_qm.h
+++ b/fs/xfs/quota/xfs_qm.h
@@ -165,7 +165,7 @@
#define XFS_QM_RELE(xqm) ((xqm)->qm_nrefs--)
extern void xfs_qm_destroy_quotainfo(xfs_mount_t *);
-extern int xfs_qm_mount_quotas(xfs_mount_t *, int);
+extern void xfs_qm_mount_quotas(xfs_mount_t *, int);
extern int xfs_qm_quotacheck(xfs_mount_t *);
extern void xfs_qm_unmount_quotadestroy(xfs_mount_t *);
extern int xfs_qm_unmount_quotas(xfs_mount_t *);
diff --git a/fs/xfs/quota/xfs_qm_bhv.c b/fs/xfs/quota/xfs_qm_bhv.c
index 97bb329..f4f6c4c 100644
--- a/fs/xfs/quota/xfs_qm_bhv.c
+++ b/fs/xfs/quota/xfs_qm_bhv.c
@@ -118,7 +118,7 @@
*quotaflags = 0;
*needquotamount = B_FALSE;
- quotaondisk = XFS_SB_VERSION_HASQUOTA(&mp->m_sb) &&
+ quotaondisk = xfs_sb_version_hasquota(&mp->m_sb) &&
(mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT);
if (quotaondisk) {
diff --git a/fs/xfs/quota/xfs_qm_stats.h b/fs/xfs/quota/xfs_qm_stats.h
index a50ffab..5b964fc 100644
--- a/fs/xfs/quota/xfs_qm_stats.h
+++ b/fs/xfs/quota/xfs_qm_stats.h
@@ -45,8 +45,8 @@
# define XQM_STATS_INC(count) do { } while (0)
-static __inline void xfs_qm_init_procfs(void) { };
-static __inline void xfs_qm_cleanup_procfs(void) { };
+static inline void xfs_qm_init_procfs(void) { };
+static inline void xfs_qm_cleanup_procfs(void) { };
#endif
diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c
index 2cc5886..8342823 100644
--- a/fs/xfs/quota/xfs_qm_syscalls.c
+++ b/fs/xfs/quota/xfs_qm_syscalls.c
@@ -279,9 +279,12 @@
/*
* Write the LI_QUOTAOFF log record, and do SB changes atomically,
- * and synchronously.
+ * and synchronously. If we fail to write, we should abort the
+ * operation as it cannot be recovered safely if we crash.
*/
- xfs_qm_log_quotaoff(mp, &qoffstart, flags);
+ error = xfs_qm_log_quotaoff(mp, &qoffstart, flags);
+ if (error)
+ goto out_error;
/*
* Next we clear the XFS_MOUNT_*DQ_ACTIVE bit(s) in the mount struct
@@ -337,7 +340,12 @@
* So, we have QUOTAOFF start and end logitems; the start
* logitem won't get overwritten until the end logitem appears...
*/
- xfs_qm_log_quotaoff_end(mp, qoffstart, flags);
+ error = xfs_qm_log_quotaoff_end(mp, qoffstart, flags);
+ if (error) {
+ /* We're screwed now. Shutdown is the only option. */
+ xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
+ goto out_error;
+ }
/*
* If quotas is completely disabled, close shop.
@@ -361,6 +369,7 @@
XFS_PURGE_INODE(XFS_QI_GQIP(mp));
XFS_QI_GQIP(mp) = NULL;
}
+out_error:
mutex_unlock(&(XFS_QI_QOFFLOCK(mp)));
return (error);
@@ -371,35 +380,34 @@
xfs_mount_t *mp,
uint flags)
{
- int error;
+ int error = 0, error2 = 0;
xfs_inode_t *qip;
if (!capable(CAP_SYS_ADMIN))
return XFS_ERROR(EPERM);
- error = 0;
- if (!XFS_SB_VERSION_HASQUOTA(&mp->m_sb) || flags == 0) {
+ if (!xfs_sb_version_hasquota(&mp->m_sb) || flags == 0) {
qdprintk("qtrunc flags=%x m_qflags=%x\n", flags, mp->m_qflags);
return XFS_ERROR(EINVAL);
}
if ((flags & XFS_DQ_USER) && mp->m_sb.sb_uquotino != NULLFSINO) {
error = xfs_iget(mp, NULL, mp->m_sb.sb_uquotino, 0, 0, &qip, 0);
- if (! error) {
- (void) xfs_truncate_file(mp, qip);
- VN_RELE(XFS_ITOV(qip));
+ if (!error) {
+ error = xfs_truncate_file(mp, qip);
+ IRELE(qip);
}
}
if ((flags & (XFS_DQ_GROUP|XFS_DQ_PROJ)) &&
mp->m_sb.sb_gquotino != NULLFSINO) {
- error = xfs_iget(mp, NULL, mp->m_sb.sb_gquotino, 0, 0, &qip, 0);
- if (! error) {
- (void) xfs_truncate_file(mp, qip);
- VN_RELE(XFS_ITOV(qip));
+ error2 = xfs_iget(mp, NULL, mp->m_sb.sb_gquotino, 0, 0, &qip, 0);
+ if (!error2) {
+ error2 = xfs_truncate_file(mp, qip);
+ IRELE(qip);
}
}
- return (error);
+ return error ? error : error2;
}
@@ -522,7 +530,7 @@
memset(out, 0, sizeof(fs_quota_stat_t));
out->qs_version = FS_QSTAT_VERSION;
- if (! XFS_SB_VERSION_HASQUOTA(&mp->m_sb)) {
+ if (!xfs_sb_version_hasquota(&mp->m_sb)) {
out->qs_uquota.qfs_ino = NULLFSINO;
out->qs_gquota.qfs_ino = NULLFSINO;
return (0);
@@ -552,13 +560,13 @@
out->qs_uquota.qfs_nblks = uip->i_d.di_nblocks;
out->qs_uquota.qfs_nextents = uip->i_d.di_nextents;
if (tempuqip)
- VN_RELE(XFS_ITOV(uip));
+ IRELE(uip);
}
if (gip) {
out->qs_gquota.qfs_nblks = gip->i_d.di_nblocks;
out->qs_gquota.qfs_nextents = gip->i_d.di_nextents;
if (tempgqip)
- VN_RELE(XFS_ITOV(gip));
+ IRELE(gip);
}
if (mp->m_quotainfo) {
out->qs_incoredqs = XFS_QI_MPLNDQUOTS(mp);
@@ -726,12 +734,12 @@
xfs_trans_log_dquot(tp, dqp);
xfs_dqtrace_entry(dqp, "Q_SETQLIM: COMMIT");
- xfs_trans_commit(tp, 0);
+ error = xfs_trans_commit(tp, 0);
xfs_qm_dqprint(dqp);
xfs_qm_dqrele(dqp);
mutex_unlock(&(XFS_QI_QOFFLOCK(mp)));
- return (0);
+ return error;
}
STATIC int
@@ -1095,7 +1103,7 @@
* inactive code in hell.
*/
if (vnode_refd)
- VN_RELE(vp);
+ IRELE(ip);
XFS_MOUNT_ILOCK(mp);
/*
* If an inode was inserted or removed, we gotta
diff --git a/fs/xfs/support/ktrace.c b/fs/xfs/support/ktrace.c
index 129067c..0b75d30 100644
--- a/fs/xfs/support/ktrace.c
+++ b/fs/xfs/support/ktrace.c
@@ -24,7 +24,7 @@
void __init
ktrace_init(int zentries)
{
- ktrace_zentries = zentries;
+ ktrace_zentries = roundup_pow_of_two(zentries);
ktrace_hdr_zone = kmem_zone_init(sizeof(ktrace_t),
"ktrace_hdr");
@@ -47,13 +47,16 @@
* ktrace_alloc()
*
* Allocate a ktrace header and enough buffering for the given
- * number of entries.
+ * number of entries. Round the number of entries up to a
+ * power of 2 so we can do fast masking to get the index from
+ * the atomic index counter.
*/
ktrace_t *
ktrace_alloc(int nentries, unsigned int __nocast sleep)
{
ktrace_t *ktp;
ktrace_entry_t *ktep;
+ int entries;
ktp = (ktrace_t*)kmem_zone_alloc(ktrace_hdr_zone, sleep);
@@ -70,11 +73,12 @@
/*
* Special treatment for buffers with the ktrace_zentries entries
*/
- if (nentries == ktrace_zentries) {
+ entries = roundup_pow_of_two(nentries);
+ if (entries == ktrace_zentries) {
ktep = (ktrace_entry_t*)kmem_zone_zalloc(ktrace_ent_zone,
sleep);
} else {
- ktep = (ktrace_entry_t*)kmem_zalloc((nentries * sizeof(*ktep)),
+ ktep = (ktrace_entry_t*)kmem_zalloc((entries * sizeof(*ktep)),
sleep | KM_LARGE);
}
@@ -91,8 +95,10 @@
}
ktp->kt_entries = ktep;
- ktp->kt_nentries = nentries;
- ktp->kt_index = 0;
+ ktp->kt_nentries = entries;
+ ASSERT(is_power_of_2(entries));
+ ktp->kt_index_mask = entries - 1;
+ atomic_set(&ktp->kt_index, 0);
ktp->kt_rollover = 0;
return ktp;
}
@@ -151,8 +157,6 @@
void *val14,
void *val15)
{
- static DEFINE_SPINLOCK(wrap_lock);
- unsigned long flags;
int index;
ktrace_entry_t *ktep;
@@ -161,12 +165,8 @@
/*
* Grab an entry by pushing the index up to the next one.
*/
- spin_lock_irqsave(&wrap_lock, flags);
- index = ktp->kt_index;
- if (++ktp->kt_index == ktp->kt_nentries)
- ktp->kt_index = 0;
- spin_unlock_irqrestore(&wrap_lock, flags);
-
+ index = atomic_add_return(1, &ktp->kt_index);
+ index = (index - 1) & ktp->kt_index_mask;
if (!ktp->kt_rollover && index == ktp->kt_nentries - 1)
ktp->kt_rollover = 1;
@@ -199,11 +199,12 @@
ktrace_nentries(
ktrace_t *ktp)
{
- if (ktp == NULL) {
+ int index;
+ if (ktp == NULL)
return 0;
- }
- return (ktp->kt_rollover ? ktp->kt_nentries : ktp->kt_index);
+ index = atomic_read(&ktp->kt_index) & ktp->kt_index_mask;
+ return (ktp->kt_rollover ? ktp->kt_nentries : index);
}
/*
@@ -228,7 +229,7 @@
int nentries;
if (ktp->kt_rollover)
- index = ktp->kt_index;
+ index = atomic_read(&ktp->kt_index) & ktp->kt_index_mask;
else
index = 0;
diff --git a/fs/xfs/support/ktrace.h b/fs/xfs/support/ktrace.h
index 56e72b4..741d694 100644
--- a/fs/xfs/support/ktrace.h
+++ b/fs/xfs/support/ktrace.h
@@ -30,7 +30,8 @@
*/
typedef struct ktrace {
int kt_nentries; /* number of entries in trace buf */
- int kt_index; /* current index in entries */
+ atomic_t kt_index; /* current index in entries */
+ unsigned int kt_index_mask;
int kt_rollover;
ktrace_entry_t *kt_entries; /* buffer of entries */
} ktrace_t;
diff --git a/fs/xfs/xfs.h b/fs/xfs/xfs.h
index 540e4c9..765aaf6 100644
--- a/fs/xfs/xfs.h
+++ b/fs/xfs/xfs.h
@@ -22,7 +22,7 @@
#define STATIC
#define DEBUG 1
#define XFS_BUF_LOCK_TRACKING 1
-/* #define QUOTADEBUG 1 */
+#define QUOTADEBUG 1
#endif
#ifdef CONFIG_XFS_TRACE
diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c
index 7272fe3..8e130b9 100644
--- a/fs/xfs/xfs_acl.c
+++ b/fs/xfs/xfs_acl.c
@@ -307,12 +307,13 @@
VN_HOLD(vp);
error = xfs_acl_allow_set(vp, kind);
- if (error)
- goto out;
/* Incoming ACL exists, set file mode based on its value */
- if (kind == _ACL_TYPE_ACCESS)
- xfs_acl_setmode(vp, xfs_acl, &basicperms);
+ if (!error && kind == _ACL_TYPE_ACCESS)
+ error = xfs_acl_setmode(vp, xfs_acl, &basicperms);
+
+ if (error)
+ goto out;
/*
* If we have more than std unix permissions, set up the actual attr.
@@ -323,7 +324,7 @@
if (!basicperms) {
xfs_acl_set_attr(vp, xfs_acl, kind, &error);
} else {
- xfs_acl_vremove(vp, _ACL_TYPE_ACCESS);
+ error = -xfs_acl_vremove(vp, _ACL_TYPE_ACCESS);
}
out:
@@ -707,7 +708,9 @@
memcpy(cacl, pdaclp, sizeof(xfs_acl_t));
xfs_acl_filter_mode(mode, cacl);
- xfs_acl_setmode(vp, cacl, &basicperms);
+ error = xfs_acl_setmode(vp, cacl, &basicperms);
+ if (error)
+ goto out_error;
/*
* Set the Default and Access ACL on the file. The mode is already
@@ -720,6 +723,7 @@
xfs_acl_set_attr(vp, pdaclp, _ACL_TYPE_DEFAULT, &error);
if (!error && !basicperms)
xfs_acl_set_attr(vp, cacl, _ACL_TYPE_ACCESS, &error);
+out_error:
_ACL_FREE(cacl);
return error;
}
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index bdbfbbe..1956f83 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -45,7 +45,7 @@
#define XFSA_FIXUP_BNO_OK 1
#define XFSA_FIXUP_CNT_OK 2
-STATIC int
+STATIC void
xfs_alloc_search_busy(xfs_trans_t *tp,
xfs_agnumber_t agno,
xfs_agblock_t bno,
@@ -55,24 +55,24 @@
ktrace_t *xfs_alloc_trace_buf;
#define TRACE_ALLOC(s,a) \
- xfs_alloc_trace_alloc(__FUNCTION__, s, a, __LINE__)
+ xfs_alloc_trace_alloc(__func__, s, a, __LINE__)
#define TRACE_FREE(s,a,b,x,f) \
- xfs_alloc_trace_free(__FUNCTION__, s, mp, a, b, x, f, __LINE__)
+ xfs_alloc_trace_free(__func__, s, mp, a, b, x, f, __LINE__)
#define TRACE_MODAGF(s,a,f) \
- xfs_alloc_trace_modagf(__FUNCTION__, s, mp, a, f, __LINE__)
-#define TRACE_BUSY(__FUNCTION__,s,ag,agb,l,sl,tp) \
- xfs_alloc_trace_busy(__FUNCTION__, s, mp, ag, agb, l, sl, tp, XFS_ALLOC_KTRACE_BUSY, __LINE__)
-#define TRACE_UNBUSY(__FUNCTION__,s,ag,sl,tp) \
- xfs_alloc_trace_busy(__FUNCTION__, s, mp, ag, -1, -1, sl, tp, XFS_ALLOC_KTRACE_UNBUSY, __LINE__)
-#define TRACE_BUSYSEARCH(__FUNCTION__,s,ag,agb,l,sl,tp) \
- xfs_alloc_trace_busy(__FUNCTION__, s, mp, ag, agb, l, sl, tp, XFS_ALLOC_KTRACE_BUSYSEARCH, __LINE__)
+ xfs_alloc_trace_modagf(__func__, s, mp, a, f, __LINE__)
+#define TRACE_BUSY(__func__,s,ag,agb,l,sl,tp) \
+ xfs_alloc_trace_busy(__func__, s, mp, ag, agb, l, sl, tp, XFS_ALLOC_KTRACE_BUSY, __LINE__)
+#define TRACE_UNBUSY(__func__,s,ag,sl,tp) \
+ xfs_alloc_trace_busy(__func__, s, mp, ag, -1, -1, sl, tp, XFS_ALLOC_KTRACE_UNBUSY, __LINE__)
+#define TRACE_BUSYSEARCH(__func__,s,ag,agb,l,tp) \
+ xfs_alloc_trace_busy(__func__, s, mp, ag, agb, l, 0, tp, XFS_ALLOC_KTRACE_BUSYSEARCH, __LINE__)
#else
#define TRACE_ALLOC(s,a)
#define TRACE_FREE(s,a,b,x,f)
#define TRACE_MODAGF(s,a,f)
#define TRACE_BUSY(s,a,ag,agb,l,sl,tp)
#define TRACE_UNBUSY(fname,s,ag,sl,tp)
-#define TRACE_BUSYSEARCH(fname,s,ag,agb,l,sl,tp)
+#define TRACE_BUSYSEARCH(fname,s,ag,agb,l,tp)
#endif /* XFS_ALLOC_TRACE */
/*
@@ -93,7 +93,7 @@
* Compute aligned version of the found extent.
* Takes alignment and min length into account.
*/
-STATIC int /* success (>= minlen) */
+STATIC void
xfs_alloc_compute_aligned(
xfs_agblock_t foundbno, /* starting block in found extent */
xfs_extlen_t foundlen, /* length in found extent */
@@ -116,7 +116,6 @@
}
*resbno = bno;
*reslen = len;
- return len >= minlen;
}
/*
@@ -837,9 +836,9 @@
if ((error = xfs_alloc_get_rec(cnt_cur, <bno, <len, &i)))
goto error0;
XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
- if (!xfs_alloc_compute_aligned(ltbno, ltlen,
- args->alignment, args->minlen,
- <bnoa, <lena))
+ xfs_alloc_compute_aligned(ltbno, ltlen, args->alignment,
+ args->minlen, <bnoa, <lena);
+ if (ltlena < args->minlen)
continue;
args->len = XFS_EXTLEN_MIN(ltlena, args->maxlen);
xfs_alloc_fix_len(args);
@@ -958,9 +957,9 @@
if ((error = xfs_alloc_get_rec(bno_cur_lt, <bno, <len, &i)))
goto error0;
XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
- if (xfs_alloc_compute_aligned(ltbno, ltlen,
- args->alignment, args->minlen,
- <bnoa, <lena))
+ xfs_alloc_compute_aligned(ltbno, ltlen, args->alignment,
+ args->minlen, <bnoa, <lena);
+ if (ltlena >= args->minlen)
break;
if ((error = xfs_alloc_decrement(bno_cur_lt, 0, &i)))
goto error0;
@@ -974,9 +973,9 @@
if ((error = xfs_alloc_get_rec(bno_cur_gt, >bno, >len, &i)))
goto error0;
XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
- if (xfs_alloc_compute_aligned(gtbno, gtlen,
- args->alignment, args->minlen,
- >bnoa, >lena))
+ xfs_alloc_compute_aligned(gtbno, gtlen, args->alignment,
+ args->minlen, >bnoa, >lena);
+ if (gtlena >= args->minlen)
break;
if ((error = xfs_alloc_increment(bno_cur_gt, 0, &i)))
goto error0;
@@ -2562,9 +2561,10 @@
/*
- * returns non-zero if any of (agno,bno):len is in a busy list
+ * If we find the extent in the busy list, force the log out to get the
+ * extent out of the busy list so the caller can use it straight away.
*/
-STATIC int
+STATIC void
xfs_alloc_search_busy(xfs_trans_t *tp,
xfs_agnumber_t agno,
xfs_agblock_t bno,
@@ -2572,7 +2572,6 @@
{
xfs_mount_t *mp;
xfs_perag_busy_t *bsy;
- int n;
xfs_agblock_t uend, bend;
xfs_lsn_t lsn;
int cnt;
@@ -2585,21 +2584,18 @@
uend = bno + len - 1;
/* search pagb_list for this slot, skipping open slots */
- for (bsy = mp->m_perag[agno].pagb_list, n = 0;
- cnt; bsy++, n++) {
+ for (bsy = mp->m_perag[agno].pagb_list; cnt; bsy++) {
/*
* (start1,length1) within (start2, length2)
*/
if (bsy->busy_tp != NULL) {
bend = bsy->busy_start + bsy->busy_length - 1;
- if ((bno > bend) ||
- (uend < bsy->busy_start)) {
+ if ((bno > bend) || (uend < bsy->busy_start)) {
cnt--;
} else {
TRACE_BUSYSEARCH("xfs_alloc_search_busy",
- "found1", agno, bno, len, n,
- tp);
+ "found1", agno, bno, len, tp);
break;
}
}
@@ -2610,15 +2606,12 @@
* transaction that freed the block
*/
if (cnt) {
- TRACE_BUSYSEARCH("xfs_alloc_search_busy", "found", agno, bno, len, n, tp);
+ TRACE_BUSYSEARCH("xfs_alloc_search_busy", "found", agno, bno, len, tp);
lsn = bsy->busy_tp->t_commit_lsn;
spin_unlock(&mp->m_perag[agno].pagb_lock);
xfs_log_force(mp, lsn, XFS_LOG_FORCE|XFS_LOG_SYNC);
} else {
- TRACE_BUSYSEARCH("xfs_alloc_search_busy", "not-found", agno, bno, len, n, tp);
- n = -1;
+ TRACE_BUSYSEARCH("xfs_alloc_search_busy", "not-found", agno, bno, len, tp);
spin_unlock(&mp->m_perag[agno].pagb_lock);
}
-
- return n;
}
diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c
index e58f321..36d781e 100644
--- a/fs/xfs/xfs_attr.c
+++ b/fs/xfs/xfs_attr.c
@@ -2647,14 +2647,6 @@
}
STATIC int
-attr_secure_capable(
- bhv_vnode_t *vp,
- cred_t *cred)
-{
- return -ENOSECURITY;
-}
-
-STATIC int
attr_system_set(
bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags)
{
@@ -2724,7 +2716,7 @@
.attr_get = attr_generic_get,
.attr_set = attr_generic_set,
.attr_remove = attr_generic_remove,
- .attr_capable = attr_secure_capable,
+ .attr_capable = (attrcapable_t)fs_noerr,
};
struct attrnames attr_user = {
diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index b08e2a2..303d41e 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -166,7 +166,7 @@
if (!(mp->m_flags & XFS_MOUNT_ATTR2)) {
if (bytes <= XFS_IFORK_ASIZE(dp))
- return mp->m_attroffset >> 3;
+ return dp->i_d.di_forkoff;
return 0;
}
@@ -227,10 +227,10 @@
xfs_sbversion_add_attr2(xfs_mount_t *mp, xfs_trans_t *tp)
{
if ((mp->m_flags & XFS_MOUNT_ATTR2) &&
- !(XFS_SB_VERSION_HASATTR2(&mp->m_sb))) {
+ !(xfs_sb_version_hasattr2(&mp->m_sb))) {
spin_lock(&mp->m_sb_lock);
- if (!XFS_SB_VERSION_HASATTR2(&mp->m_sb)) {
- XFS_SB_VERSION_ADDATTR2(&mp->m_sb);
+ if (!xfs_sb_version_hasattr2(&mp->m_sb)) {
+ xfs_sb_version_addattr2(&mp->m_sb);
spin_unlock(&mp->m_sb_lock);
xfs_mod_sb(tp, XFS_SB_VERSIONNUM | XFS_SB_FEATURES2);
} else
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 1c0a5a5..eb198c0 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -323,13 +323,13 @@
int whichfork); /* data or attr fork */
#define XFS_BMAP_TRACE_DELETE(d,ip,i,c,w) \
- xfs_bmap_trace_delete(__FUNCTION__,d,ip,i,c,w)
+ xfs_bmap_trace_delete(__func__,d,ip,i,c,w)
#define XFS_BMAP_TRACE_INSERT(d,ip,i,c,r1,r2,w) \
- xfs_bmap_trace_insert(__FUNCTION__,d,ip,i,c,r1,r2,w)
+ xfs_bmap_trace_insert(__func__,d,ip,i,c,r1,r2,w)
#define XFS_BMAP_TRACE_POST_UPDATE(d,ip,i,w) \
- xfs_bmap_trace_post_update(__FUNCTION__,d,ip,i,w)
+ xfs_bmap_trace_post_update(__func__,d,ip,i,w)
#define XFS_BMAP_TRACE_PRE_UPDATE(d,ip,i,w) \
- xfs_bmap_trace_pre_update(__FUNCTION__,d,ip,i,w)
+ xfs_bmap_trace_pre_update(__func__,d,ip,i,w)
#else
#define XFS_BMAP_TRACE_DELETE(d,ip,i,c,w)
#define XFS_BMAP_TRACE_INSERT(d,ip,i,c,r1,r2,w)
@@ -2402,7 +2402,7 @@
#define XFS_ALLOC_GAP_UNITS 4
-STATIC int
+STATIC void
xfs_bmap_adjacent(
xfs_bmalloca_t *ap) /* bmap alloc argument struct */
{
@@ -2548,7 +2548,6 @@
ap->rval = gotbno;
}
#undef ISVALID
- return 0;
}
STATIC int
@@ -4047,17 +4046,17 @@
xfs_trans_log_inode(tp, ip, logflags);
if (error)
goto error2;
- if (!XFS_SB_VERSION_HASATTR(&mp->m_sb) ||
- (!XFS_SB_VERSION_HASATTR2(&mp->m_sb) && version == 2)) {
+ if (!xfs_sb_version_hasattr(&mp->m_sb) ||
+ (!xfs_sb_version_hasattr2(&mp->m_sb) && version == 2)) {
__int64_t sbfields = 0;
spin_lock(&mp->m_sb_lock);
- if (!XFS_SB_VERSION_HASATTR(&mp->m_sb)) {
- XFS_SB_VERSION_ADDATTR(&mp->m_sb);
+ if (!xfs_sb_version_hasattr(&mp->m_sb)) {
+ xfs_sb_version_addattr(&mp->m_sb);
sbfields |= XFS_SB_VERSIONNUM;
}
- if (!XFS_SB_VERSION_HASATTR2(&mp->m_sb) && version == 2) {
- XFS_SB_VERSION_ADDATTR2(&mp->m_sb);
+ if (!xfs_sb_version_hasattr2(&mp->m_sb) && version == 2) {
+ xfs_sb_version_addattr2(&mp->m_sb);
sbfields |= (XFS_SB_VERSIONNUM | XFS_SB_FEATURES2);
}
if (sbfields) {
@@ -4154,16 +4153,21 @@
* number of leaf entries, is controlled by the type of di_nextents
* (a signed 32-bit number, xfs_extnum_t), or by di_anextents
* (a signed 16-bit number, xfs_aextnum_t).
+ *
+ * Note that we can no longer assume that if we are in ATTR1 that
+ * the fork offset of all the inodes will be (m_attroffset >> 3)
+ * because we could have mounted with ATTR2 and then mounted back
+ * with ATTR1, keeping the di_forkoff's fixed but probably at
+ * various positions. Therefore, for both ATTR1 and ATTR2
+ * we have to assume the worst case scenario of a minimum size
+ * available.
*/
if (whichfork == XFS_DATA_FORK) {
maxleafents = MAXEXTNUM;
- sz = (mp->m_flags & XFS_MOUNT_ATTR2) ?
- XFS_BMDR_SPACE_CALC(MINDBTPTRS) : mp->m_attroffset;
+ sz = XFS_BMDR_SPACE_CALC(MINDBTPTRS);
} else {
maxleafents = MAXAEXTNUM;
- sz = (mp->m_flags & XFS_MOUNT_ATTR2) ?
- XFS_BMDR_SPACE_CALC(MINABTPTRS) :
- mp->m_sb.sb_inodesize - mp->m_attroffset;
+ sz = XFS_BMDR_SPACE_CALC(MINABTPTRS);
}
maxrootrecs = (int)XFS_BTREE_BLOCK_MAXRECS(sz, xfs_bmdr, 0);
minleafrecs = mp->m_bmap_dmnr[0];
@@ -5043,7 +5047,7 @@
* A wasdelay extent has been initialized, so
* shouldn't be flagged as unwritten.
*/
- if (wr && XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+ if (wr && xfs_sb_version_hasextflgbit(&mp->m_sb)) {
if (!wasdelay && (flags & XFS_BMAPI_PREALLOC))
got.br_state = XFS_EXT_UNWRITTEN;
}
@@ -5483,7 +5487,7 @@
* get rid of part of a realtime extent.
*/
if (del.br_state == XFS_EXT_UNWRITTEN ||
- !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+ !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
/*
* This piece is unwritten, or we're not
* using unwritten extents. Skip over it.
@@ -5535,7 +5539,7 @@
} else if ((del.br_startoff == start &&
(del.br_state == XFS_EXT_UNWRITTEN ||
xfs_trans_get_block_res(tp) == 0)) ||
- !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+ !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
/*
* Can't make it unwritten. There isn't
* a full extent here so just skip it.
@@ -5772,7 +5776,6 @@
int error; /* return value */
__int64_t fixlen; /* length for -1 case */
int i; /* extent number */
- bhv_vnode_t *vp; /* corresponding vnode */
int lock; /* lock state */
xfs_bmbt_irec_t *map; /* buffer for user's data */
xfs_mount_t *mp; /* file system mount point */
@@ -5789,7 +5792,6 @@
int bmapi_flags; /* flags for xfs_bmapi */
__int32_t oflags; /* getbmapx bmv_oflags field */
- vp = XFS_ITOV(ip);
mp = ip->i_mount;
whichfork = interface & BMV_IF_ATTRFORK ? XFS_ATTR_FORK : XFS_DATA_FORK;
@@ -5811,7 +5813,7 @@
if ((interface & BMV_IF_NO_DMAPI_READ) == 0 &&
DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
whichfork == XFS_DATA_FORK) {
- error = XFS_SEND_DATA(mp, DM_EVENT_READ, vp, 0, 0, 0, NULL);
+ error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, 0, 0, 0, NULL);
if (error)
return XFS_ERROR(error);
}
@@ -5869,6 +5871,10 @@
/* xfs_fsize_t last_byte = xfs_file_last_byte(ip); */
error = xfs_flush_pages(ip, (xfs_off_t)0,
-1, 0, FI_REMAPF);
+ if (error) {
+ xfs_iunlock(ip, XFS_IOLOCK_SHARED);
+ return error;
+ }
}
ASSERT(whichfork == XFS_ATTR_FORK || ip->i_delayed_blks == 0);
@@ -6162,10 +6168,10 @@
}
if (*thispa == *pp) {
cmn_err(CE_WARN, "%s: thispa(%d) == pp(%d) %Ld",
- __FUNCTION__, j, i,
+ __func__, j, i,
(unsigned long long)be64_to_cpu(*thispa));
panic("%s: ptrs are equal in node\n",
- __FUNCTION__);
+ __func__);
}
}
}
@@ -6192,7 +6198,7 @@
xfs_mount_t *mp; /* file system mount structure */
__be64 *pp; /* pointer to block address */
xfs_bmbt_rec_t *ep; /* pointer to current extent */
- xfs_bmbt_rec_t *lastp; /* pointer to previous extent */
+ xfs_bmbt_rec_t last = {0, 0}; /* last extent in prev block */
xfs_bmbt_rec_t *nextp; /* pointer to next extent */
int bp_release = 0;
@@ -6262,7 +6268,6 @@
/*
* Loop over all leaf nodes checking that all extents are in the right order.
*/
- lastp = NULL;
for (;;) {
xfs_fsblock_t nextbno;
xfs_extnum_t num_recs;
@@ -6283,18 +6288,16 @@
*/
ep = XFS_BTREE_REC_ADDR(xfs_bmbt, block, 1);
+ if (i) {
+ xfs_btree_check_rec(XFS_BTNUM_BMAP, &last, ep);
+ }
for (j = 1; j < num_recs; j++) {
nextp = XFS_BTREE_REC_ADDR(xfs_bmbt, block, j + 1);
- if (lastp) {
- xfs_btree_check_rec(XFS_BTNUM_BMAP,
- (void *)lastp, (void *)ep);
- }
- xfs_btree_check_rec(XFS_BTNUM_BMAP, (void *)ep,
- (void *)(nextp));
- lastp = ep;
+ xfs_btree_check_rec(XFS_BTNUM_BMAP, ep, nextp);
ep = nextp;
}
+ last = *ep;
i += num_recs;
if (bp_release) {
bp_release = 0;
@@ -6325,13 +6328,13 @@
return;
error0:
- cmn_err(CE_WARN, "%s: at error0", __FUNCTION__);
+ cmn_err(CE_WARN, "%s: at error0", __func__);
if (bp_release)
xfs_trans_brelse(NULL, bp);
error_norelse:
cmn_err(CE_WARN, "%s: BAD after btree leaves for %d extents",
- __FUNCTION__, i);
- panic("%s: CORRUPTED BTREE OR SOMETHING", __FUNCTION__);
+ __func__, i);
+ panic("%s: CORRUPTED BTREE OR SOMETHING", __func__);
return;
}
#endif
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 87224b7..6ff70cd 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -151,7 +151,7 @@
xfs_extnum_t cnt, /* count of entries in list */
int whichfork); /* data or attr fork */
#define XFS_BMAP_TRACE_EXLIST(ip,c,w) \
- xfs_bmap_trace_exlist(__FUNCTION__,ip,c,w)
+ xfs_bmap_trace_exlist(__func__,ip,c,w)
#else
#define XFS_BMAP_TRACE_EXLIST(ip,c,w)
#endif
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index bd18987..4f0e849 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -275,21 +275,21 @@
}
#define XFS_BMBT_TRACE_ARGBI(c,b,i) \
- xfs_bmbt_trace_argbi(__FUNCTION__, c, b, i, __LINE__)
+ xfs_bmbt_trace_argbi(__func__, c, b, i, __LINE__)
#define XFS_BMBT_TRACE_ARGBII(c,b,i,j) \
- xfs_bmbt_trace_argbii(__FUNCTION__, c, b, i, j, __LINE__)
+ xfs_bmbt_trace_argbii(__func__, c, b, i, j, __LINE__)
#define XFS_BMBT_TRACE_ARGFFFI(c,o,b,i,j) \
- xfs_bmbt_trace_argfffi(__FUNCTION__, c, o, b, i, j, __LINE__)
+ xfs_bmbt_trace_argfffi(__func__, c, o, b, i, j, __LINE__)
#define XFS_BMBT_TRACE_ARGI(c,i) \
- xfs_bmbt_trace_argi(__FUNCTION__, c, i, __LINE__)
+ xfs_bmbt_trace_argi(__func__, c, i, __LINE__)
#define XFS_BMBT_TRACE_ARGIFK(c,i,f,s) \
- xfs_bmbt_trace_argifk(__FUNCTION__, c, i, f, s, __LINE__)
+ xfs_bmbt_trace_argifk(__func__, c, i, f, s, __LINE__)
#define XFS_BMBT_TRACE_ARGIFR(c,i,f,r) \
- xfs_bmbt_trace_argifr(__FUNCTION__, c, i, f, r, __LINE__)
+ xfs_bmbt_trace_argifr(__func__, c, i, f, r, __LINE__)
#define XFS_BMBT_TRACE_ARGIK(c,i,k) \
- xfs_bmbt_trace_argik(__FUNCTION__, c, i, k, __LINE__)
+ xfs_bmbt_trace_argik(__func__, c, i, k, __LINE__)
#define XFS_BMBT_TRACE_CURSOR(c,s) \
- xfs_bmbt_trace_cursor(__FUNCTION__, c, s, __LINE__)
+ xfs_bmbt_trace_cursor(__func__, c, s, __LINE__)
#else
#define XFS_BMBT_TRACE_ARGBI(c,b,i)
#define XFS_BMBT_TRACE_ARGBII(c,b,i,j)
@@ -2027,6 +2027,24 @@
/*
* Insert the current record at the point referenced by cur.
+ *
+ * A multi-level split of the tree on insert will invalidate the original
+ * cursor. It appears, however, that some callers assume that the cursor is
+ * always valid. Hence if we do a multi-level split we need to revalidate the
+ * cursor.
+ *
+ * When a split occurs, we will see a new cursor returned. Use that as a
+ * trigger to determine if we need to revalidate the original cursor. If we get
+ * a split, then use the original irec to lookup up the path of the record we
+ * just inserted.
+ *
+ * Note that the fact that the btree root is in the inode means that we can
+ * have the level of the tree change without a "split" occurring at the root
+ * level. What happens is that the root is migrated to an allocated block and
+ * the inode root is pointed to it. This means a single split can change the
+ * level of the tree (level 2 -> level 3) and invalidate the old cursor. Hence
+ * the level change should be accounted as a split so as to correctly trigger a
+ * revalidation of the old cursor.
*/
int /* error */
xfs_bmbt_insert(
@@ -2039,11 +2057,14 @@
xfs_fsblock_t nbno;
xfs_btree_cur_t *ncur;
xfs_bmbt_rec_t nrec;
+ xfs_bmbt_irec_t oirec; /* original irec */
xfs_btree_cur_t *pcur;
+ int splits = 0;
XFS_BMBT_TRACE_CURSOR(cur, ENTRY);
level = 0;
nbno = NULLFSBLOCK;
+ oirec = cur->bc_rec.b;
xfs_bmbt_disk_set_all(&nrec, &cur->bc_rec.b);
ncur = NULL;
pcur = cur;
@@ -2052,11 +2073,13 @@
&i))) {
if (pcur != cur)
xfs_btree_del_cursor(pcur, XFS_BTREE_ERROR);
- XFS_BMBT_TRACE_CURSOR(cur, ERROR);
- return error;
+ goto error0;
}
XFS_WANT_CORRUPTED_GOTO(i == 1, error0);
if (pcur != cur && (ncur || nbno == NULLFSBLOCK)) {
+ /* allocating a new root is effectively a split */
+ if (cur->bc_nlevels != pcur->bc_nlevels)
+ splits++;
cur->bc_nlevels = pcur->bc_nlevels;
cur->bc_private.b.allocated +=
pcur->bc_private.b.allocated;
@@ -2070,10 +2093,21 @@
xfs_btree_del_cursor(pcur, XFS_BTREE_NOERROR);
}
if (ncur) {
+ splits++;
pcur = ncur;
ncur = NULL;
}
} while (nbno != NULLFSBLOCK);
+
+ if (splits > 1) {
+ /* revalidate the old cursor as we had a multi-level split */
+ error = xfs_bmbt_lookup_eq(cur, oirec.br_startoff,
+ oirec.br_startblock, oirec.br_blockcount, &i);
+ if (error)
+ goto error0;
+ ASSERT(i == 1);
+ }
+
XFS_BMBT_TRACE_CURSOR(cur, EXIT);
*stat = i;
return 0;
diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h
index 2d950e9..cd0d4b4 100644
--- a/fs/xfs/xfs_bmap_btree.h
+++ b/fs/xfs/xfs_bmap_btree.h
@@ -120,7 +120,7 @@
* Extent state and extent format macros.
*/
#define XFS_EXTFMT_INODE(x) \
- (XFS_SB_VERSION_HASEXTFLGBIT(&((x)->i_mount->m_sb)) ? \
+ (xfs_sb_version_hasextflgbit(&((x)->i_mount->m_sb)) ? \
XFS_EXTFMT_HASSTATE : XFS_EXTFMT_NOSTATE)
#define ISUNWRITTEN(x) ((x)->br_state == XFS_EXT_UNWRITTEN)
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 63debd1..53a71c6 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -645,7 +645,12 @@
bp = bip->bli_buf;
if (XFS_BUF_ISDELAYWRITE(bp)) {
- xfs_bawrite(bip->bli_item.li_mountp, bp);
+ int error;
+ error = xfs_bawrite(bip->bli_item.li_mountp, bp);
+ if (error)
+ xfs_fs_cmn_err(CE_WARN, bip->bli_item.li_mountp,
+ "xfs_buf_item_push: pushbuf error %d on bip %p, bp %p",
+ error, bip, bp);
} else {
xfs_buf_relse(bp);
}
diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c
index be7c425..7cb2652 100644
--- a/fs/xfs/xfs_dir2.c
+++ b/fs/xfs/xfs_dir2.c
@@ -44,12 +44,13 @@
#include "xfs_error.h"
#include "xfs_vnodeops.h"
+struct xfs_name xfs_name_dotdot = {"..", 2};
void
xfs_dir_mount(
xfs_mount_t *mp)
{
- ASSERT(XFS_SB_VERSION_HASDIRV2(&mp->m_sb));
+ ASSERT(xfs_sb_version_hasdirv2(&mp->m_sb));
ASSERT((1 << (mp->m_sb.sb_blocklog + mp->m_sb.sb_dirblklog)) <=
XFS_MAX_BLOCKSIZE);
mp->m_dirblksize = 1 << (mp->m_sb.sb_blocklog + mp->m_sb.sb_dirblklog);
@@ -146,8 +147,7 @@
xfs_dir_createname(
xfs_trans_t *tp,
xfs_inode_t *dp,
- char *name,
- int namelen,
+ struct xfs_name *name,
xfs_ino_t inum, /* new entry inode number */
xfs_fsblock_t *first, /* bmap's firstblock */
xfs_bmap_free_t *flist, /* bmap's freeblock list */
@@ -162,9 +162,9 @@
return rval;
XFS_STATS_INC(xs_dir_create);
- args.name = name;
- args.namelen = namelen;
- args.hashval = xfs_da_hashname(name, namelen);
+ args.name = name->name;
+ args.namelen = name->len;
+ args.hashval = xfs_da_hashname(name->name, name->len);
args.inumber = inum;
args.dp = dp;
args.firstblock = first;
@@ -197,8 +197,7 @@
xfs_dir_lookup(
xfs_trans_t *tp,
xfs_inode_t *dp,
- char *name,
- int namelen,
+ struct xfs_name *name,
xfs_ino_t *inum) /* out: inode number */
{
xfs_da_args_t args;
@@ -207,18 +206,14 @@
ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR);
XFS_STATS_INC(xs_dir_lookup);
+ memset(&args, 0, sizeof(xfs_da_args_t));
- args.name = name;
- args.namelen = namelen;
- args.hashval = xfs_da_hashname(name, namelen);
- args.inumber = 0;
+ args.name = name->name;
+ args.namelen = name->len;
+ args.hashval = xfs_da_hashname(name->name, name->len);
args.dp = dp;
- args.firstblock = NULL;
- args.flist = NULL;
- args.total = 0;
args.whichfork = XFS_DATA_FORK;
args.trans = tp;
- args.justcheck = args.addname = 0;
args.oknoent = 1;
if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL)
@@ -247,8 +242,7 @@
xfs_dir_removename(
xfs_trans_t *tp,
xfs_inode_t *dp,
- char *name,
- int namelen,
+ struct xfs_name *name,
xfs_ino_t ino,
xfs_fsblock_t *first, /* bmap's firstblock */
xfs_bmap_free_t *flist, /* bmap's freeblock list */
@@ -261,9 +255,9 @@
ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR);
XFS_STATS_INC(xs_dir_remove);
- args.name = name;
- args.namelen = namelen;
- args.hashval = xfs_da_hashname(name, namelen);
+ args.name = name->name;
+ args.namelen = name->len;
+ args.hashval = xfs_da_hashname(name->name, name->len);
args.inumber = ino;
args.dp = dp;
args.firstblock = first;
@@ -329,8 +323,7 @@
xfs_dir_replace(
xfs_trans_t *tp,
xfs_inode_t *dp,
- char *name, /* name of entry to replace */
- int namelen,
+ struct xfs_name *name, /* name of entry to replace */
xfs_ino_t inum, /* new inode number */
xfs_fsblock_t *first, /* bmap's firstblock */
xfs_bmap_free_t *flist, /* bmap's freeblock list */
@@ -345,9 +338,9 @@
if ((rval = xfs_dir_ino_validate(tp->t_mountp, inum)))
return rval;
- args.name = name;
- args.namelen = namelen;
- args.hashval = xfs_da_hashname(name, namelen);
+ args.name = name->name;
+ args.namelen = name->len;
+ args.hashval = xfs_da_hashname(name->name, name->len);
args.inumber = inum;
args.dp = dp;
args.firstblock = first;
@@ -374,28 +367,29 @@
/*
* See if this entry can be added to the directory without allocating space.
+ * First checks that the caller couldn't reserve enough space (resblks = 0).
*/
int
xfs_dir_canenter(
xfs_trans_t *tp,
xfs_inode_t *dp,
- char *name, /* name of entry to add */
- int namelen)
+ struct xfs_name *name, /* name of entry to add */
+ uint resblks)
{
xfs_da_args_t args;
int rval;
int v; /* type-checking value */
- ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR);
+ if (resblks)
+ return 0;
- args.name = name;
- args.namelen = namelen;
- args.hashval = xfs_da_hashname(name, namelen);
- args.inumber = 0;
+ ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR);
+ memset(&args, 0, sizeof(xfs_da_args_t));
+
+ args.name = name->name;
+ args.namelen = name->len;
+ args.hashval = xfs_da_hashname(name->name, name->len);
args.dp = dp;
- args.firstblock = NULL;
- args.flist = NULL;
- args.total = 0;
args.whichfork = XFS_DATA_FORK;
args.trans = tp;
args.justcheck = args.addname = args.oknoent = 1;
diff --git a/fs/xfs/xfs_dir2.h b/fs/xfs/xfs_dir2.h
index b265197..6392f93 100644
--- a/fs/xfs/xfs_dir2.h
+++ b/fs/xfs/xfs_dir2.h
@@ -59,6 +59,8 @@
*/
typedef xfs_off_t xfs_dir2_off_t;
+extern struct xfs_name xfs_name_dotdot;
+
/*
* Generic directory interface routines
*/
@@ -68,21 +70,21 @@
extern int xfs_dir_init(struct xfs_trans *tp, struct xfs_inode *dp,
struct xfs_inode *pdp);
extern int xfs_dir_createname(struct xfs_trans *tp, struct xfs_inode *dp,
- char *name, int namelen, xfs_ino_t inum,
+ struct xfs_name *name, xfs_ino_t inum,
xfs_fsblock_t *first,
struct xfs_bmap_free *flist, xfs_extlen_t tot);
extern int xfs_dir_lookup(struct xfs_trans *tp, struct xfs_inode *dp,
- char *name, int namelen, xfs_ino_t *inum);
+ struct xfs_name *name, xfs_ino_t *inum);
extern int xfs_dir_removename(struct xfs_trans *tp, struct xfs_inode *dp,
- char *name, int namelen, xfs_ino_t ino,
+ struct xfs_name *name, xfs_ino_t ino,
xfs_fsblock_t *first,
struct xfs_bmap_free *flist, xfs_extlen_t tot);
extern int xfs_dir_replace(struct xfs_trans *tp, struct xfs_inode *dp,
- char *name, int namelen, xfs_ino_t inum,
+ struct xfs_name *name, xfs_ino_t inum,
xfs_fsblock_t *first,
struct xfs_bmap_free *flist, xfs_extlen_t tot);
extern int xfs_dir_canenter(struct xfs_trans *tp, struct xfs_inode *dp,
- char *name, int namelen);
+ struct xfs_name *name, uint resblks);
extern int xfs_dir_ino_validate(struct xfs_mount *mp, xfs_ino_t ino);
/*
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index eb03eab..3f3785b 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -73,7 +73,7 @@
#define TRACE4(mp,t,a0,a1,a2,a3) TRACE6(mp,t,a0,a1,a2,a3,0,0)
#define TRACE5(mp,t,a0,a1,a2,a3,a4) TRACE6(mp,t,a0,a1,a2,a3,a4,0)
#define TRACE6(mp,t,a0,a1,a2,a3,a4,a5) \
- xfs_filestreams_trace(mp, t, __FUNCTION__, __LINE__, \
+ xfs_filestreams_trace(mp, t, __func__, __LINE__, \
(__psunsigned_t)a0, (__psunsigned_t)a1, \
(__psunsigned_t)a2, (__psunsigned_t)a3, \
(__psunsigned_t)a4, (__psunsigned_t)a5)
diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c
index eadc159..d3a0f53 100644
--- a/fs/xfs/xfs_fsops.c
+++ b/fs/xfs/xfs_fsops.c
@@ -77,36 +77,36 @@
if (new_version >= 3) {
geo->version = XFS_FSOP_GEOM_VERSION;
geo->flags =
- (XFS_SB_VERSION_HASATTR(&mp->m_sb) ?
+ (xfs_sb_version_hasattr(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_ATTR : 0) |
- (XFS_SB_VERSION_HASNLINK(&mp->m_sb) ?
+ (xfs_sb_version_hasnlink(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_NLINK : 0) |
- (XFS_SB_VERSION_HASQUOTA(&mp->m_sb) ?
+ (xfs_sb_version_hasquota(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_QUOTA : 0) |
- (XFS_SB_VERSION_HASALIGN(&mp->m_sb) ?
+ (xfs_sb_version_hasalign(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_IALIGN : 0) |
- (XFS_SB_VERSION_HASDALIGN(&mp->m_sb) ?
+ (xfs_sb_version_hasdalign(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_DALIGN : 0) |
- (XFS_SB_VERSION_HASSHARED(&mp->m_sb) ?
+ (xfs_sb_version_hasshared(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_SHARED : 0) |
- (XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb) ?
+ (xfs_sb_version_hasextflgbit(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_EXTFLG : 0) |
- (XFS_SB_VERSION_HASDIRV2(&mp->m_sb) ?
+ (xfs_sb_version_hasdirv2(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_DIRV2 : 0) |
- (XFS_SB_VERSION_HASSECTOR(&mp->m_sb) ?
+ (xfs_sb_version_hassector(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_SECTOR : 0) |
(xfs_sb_version_haslazysbcount(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_LAZYSB : 0) |
- (XFS_SB_VERSION_HASATTR2(&mp->m_sb) ?
+ (xfs_sb_version_hasattr2(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_ATTR2 : 0);
- geo->logsectsize = XFS_SB_VERSION_HASSECTOR(&mp->m_sb) ?
+ geo->logsectsize = xfs_sb_version_hassector(&mp->m_sb) ?
mp->m_sb.sb_logsectsize : BBSIZE;
geo->rtsectsize = mp->m_sb.sb_blocksize;
geo->dirblocksize = mp->m_dirblksize;
}
if (new_version >= 4) {
geo->flags |=
- (XFS_SB_VERSION_HASLOGV2(&mp->m_sb) ?
+ (xfs_sb_version_haslogv2(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_LOGV2 : 0);
geo->logsunit = mp->m_sb.sb_logsunit;
}
diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c
index db9d5fa..a64dfbd 100644
--- a/fs/xfs/xfs_ialloc.c
+++ b/fs/xfs/xfs_ialloc.c
@@ -107,6 +107,16 @@
/*
* Allocation group level functions.
*/
+static inline int
+xfs_ialloc_cluster_alignment(
+ xfs_alloc_arg_t *args)
+{
+ if (xfs_sb_version_hasalign(&args->mp->m_sb) &&
+ args->mp->m_sb.sb_inoalignmt >=
+ XFS_B_TO_FSBT(args->mp, XFS_INODE_CLUSTER_SIZE(args->mp)))
+ return args->mp->m_sb.sb_inoalignmt;
+ return 1;
+}
/*
* Allocate new inodes in the allocation group specified by agbp.
@@ -167,10 +177,24 @@
args.mod = args.total = args.wasdel = args.isfl =
args.userdata = args.minalignslop = 0;
args.prod = 1;
- args.alignment = 1;
+
/*
- * Allow space for the inode btree to split.
+ * We need to take into account alignment here to ensure that
+ * we don't modify the free list if we fail to have an exact
+ * block. If we don't have an exact match, and every oher
+ * attempt allocation attempt fails, we'll end up cancelling
+ * a dirty transaction and shutting down.
+ *
+ * For an exact allocation, alignment must be 1,
+ * however we need to take cluster alignment into account when
+ * fixing up the freelist. Use the minalignslop field to
+ * indicate that extra blocks might be required for alignment,
+ * but not to use them in the actual exact allocation.
*/
+ args.alignment = 1;
+ args.minalignslop = xfs_ialloc_cluster_alignment(&args) - 1;
+
+ /* Allow space for the inode btree to split. */
args.minleft = XFS_IN_MAXLEVELS(args.mp) - 1;
if ((error = xfs_alloc_vextent(&args)))
return error;
@@ -191,13 +215,8 @@
ASSERT(!(args.mp->m_flags & XFS_MOUNT_NOALIGN));
args.alignment = args.mp->m_dalign;
isaligned = 1;
- } else if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) &&
- args.mp->m_sb.sb_inoalignmt >=
- XFS_B_TO_FSBT(args.mp,
- XFS_INODE_CLUSTER_SIZE(args.mp)))
- args.alignment = args.mp->m_sb.sb_inoalignmt;
- else
- args.alignment = 1;
+ } else
+ args.alignment = xfs_ialloc_cluster_alignment(&args);
/*
* Need to figure out where to allocate the inode blocks.
* Ideally they should be spaced out through the a.g.
@@ -230,12 +249,7 @@
args.agbno = be32_to_cpu(agi->agi_root);
args.fsbno = XFS_AGB_TO_FSB(args.mp,
be32_to_cpu(agi->agi_seqno), args.agbno);
- if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) &&
- args.mp->m_sb.sb_inoalignmt >=
- XFS_B_TO_FSBT(args.mp, XFS_INODE_CLUSTER_SIZE(args.mp)))
- args.alignment = args.mp->m_sb.sb_inoalignmt;
- else
- args.alignment = 1;
+ args.alignment = xfs_ialloc_cluster_alignment(&args);
if ((error = xfs_alloc_vextent(&args)))
return error;
}
@@ -271,7 +285,7 @@
* use the old version so that old kernels will continue to be
* able to use the file system.
*/
- if (XFS_SB_VERSION_HASNLINK(&args.mp->m_sb))
+ if (xfs_sb_version_hasnlink(&args.mp->m_sb))
version = XFS_DINODE_VERSION_2;
else
version = XFS_DINODE_VERSION_1;
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 8e09b71..e657c51 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -78,7 +78,6 @@
xfs_inode_t *ip;
xfs_inode_t *iq;
int error;
- xfs_icluster_t *icl, *new_icl = NULL;
unsigned long first_index, mask;
xfs_perag_t *pag;
xfs_agino_t agino;
@@ -229,11 +228,9 @@
}
/*
- * This is a bit messy - we preallocate everything we _might_
- * need before we pick up the ici lock. That way we don't have to
- * juggle locks and go all the way back to the start.
+ * Preload the radix tree so we can insert safely under the
+ * write spinlock.
*/
- new_icl = kmem_zone_alloc(xfs_icluster_zone, KM_SLEEP);
if (radix_tree_preload(GFP_KERNEL)) {
xfs_idestroy(ip);
delay(1);
@@ -242,17 +239,6 @@
mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1);
first_index = agino & mask;
write_lock(&pag->pag_ici_lock);
-
- /*
- * Find the cluster if it exists
- */
- icl = NULL;
- if (radix_tree_gang_lookup(&pag->pag_ici_root, (void**)&iq,
- first_index, 1)) {
- if ((XFS_INO_TO_AGINO(mp, iq->i_ino) & mask) == first_index)
- icl = iq->i_cluster;
- }
-
/*
* insert the new inode
*/
@@ -267,30 +253,13 @@
}
/*
- * These values _must_ be set before releasing ihlock!
+ * These values _must_ be set before releasing the radix tree lock!
*/
ip->i_udquot = ip->i_gdquot = NULL;
xfs_iflags_set(ip, XFS_INEW);
- ASSERT(ip->i_cluster == NULL);
-
- if (!icl) {
- spin_lock_init(&new_icl->icl_lock);
- INIT_HLIST_HEAD(&new_icl->icl_inodes);
- icl = new_icl;
- new_icl = NULL;
- } else {
- ASSERT(!hlist_empty(&icl->icl_inodes));
- }
- spin_lock(&icl->icl_lock);
- hlist_add_head(&ip->i_cnode, &icl->icl_inodes);
- ip->i_cluster = icl;
- spin_unlock(&icl->icl_lock);
-
write_unlock(&pag->pag_ici_lock);
radix_tree_preload_end();
- if (new_icl)
- kmem_zone_free(xfs_icluster_zone, new_icl);
/*
* Link ip to its mount and thread it on the mount's inode list.
@@ -529,18 +498,6 @@
xfs_put_perag(mp, pag);
/*
- * Remove from cluster list
- */
- mp = ip->i_mount;
- spin_lock(&ip->i_cluster->icl_lock);
- hlist_del(&ip->i_cnode);
- spin_unlock(&ip->i_cluster->icl_lock);
-
- /* was last inode in cluster? */
- if (hlist_empty(&ip->i_cluster->icl_inodes))
- kmem_zone_free(xfs_icluster_zone, ip->i_cluster);
-
- /*
* Remove from mount's inode list.
*/
XFS_MOUNT_ILOCK(mp);
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index a550546a..ca12acb 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -55,7 +55,6 @@
kmem_zone_t *xfs_ifork_zone;
kmem_zone_t *xfs_inode_zone;
-kmem_zone_t *xfs_icluster_zone;
/*
* Used in xfs_itruncate(). This is the maximum number of extents
@@ -126,6 +125,90 @@
#endif
/*
+ * Find the buffer associated with the given inode map
+ * We do basic validation checks on the buffer once it has been
+ * retrieved from disk.
+ */
+STATIC int
+xfs_imap_to_bp(
+ xfs_mount_t *mp,
+ xfs_trans_t *tp,
+ xfs_imap_t *imap,
+ xfs_buf_t **bpp,
+ uint buf_flags,
+ uint imap_flags)
+{
+ int error;
+ int i;
+ int ni;
+ xfs_buf_t *bp;
+
+ error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, imap->im_blkno,
+ (int)imap->im_len, buf_flags, &bp);
+ if (error) {
+ if (error != EAGAIN) {
+ cmn_err(CE_WARN,
+ "xfs_imap_to_bp: xfs_trans_read_buf()returned "
+ "an error %d on %s. Returning error.",
+ error, mp->m_fsname);
+ } else {
+ ASSERT(buf_flags & XFS_BUF_TRYLOCK);
+ }
+ return error;
+ }
+
+ /*
+ * Validate the magic number and version of every inode in the buffer
+ * (if DEBUG kernel) or the first inode in the buffer, otherwise.
+ */
+#ifdef DEBUG
+ ni = BBTOB(imap->im_len) >> mp->m_sb.sb_inodelog;
+#else /* usual case */
+ ni = 1;
+#endif
+
+ for (i = 0; i < ni; i++) {
+ int di_ok;
+ xfs_dinode_t *dip;
+
+ dip = (xfs_dinode_t *)xfs_buf_offset(bp,
+ (i << mp->m_sb.sb_inodelog));
+ di_ok = be16_to_cpu(dip->di_core.di_magic) == XFS_DINODE_MAGIC &&
+ XFS_DINODE_GOOD_VERSION(dip->di_core.di_version);
+ if (unlikely(XFS_TEST_ERROR(!di_ok, mp,
+ XFS_ERRTAG_ITOBP_INOTOBP,
+ XFS_RANDOM_ITOBP_INOTOBP))) {
+ if (imap_flags & XFS_IMAP_BULKSTAT) {
+ xfs_trans_brelse(tp, bp);
+ return XFS_ERROR(EINVAL);
+ }
+ XFS_CORRUPTION_ERROR("xfs_imap_to_bp",
+ XFS_ERRLEVEL_HIGH, mp, dip);
+#ifdef DEBUG
+ cmn_err(CE_PANIC,
+ "Device %s - bad inode magic/vsn "
+ "daddr %lld #%d (magic=%x)",
+ XFS_BUFTARG_NAME(mp->m_ddev_targp),
+ (unsigned long long)imap->im_blkno, i,
+ be16_to_cpu(dip->di_core.di_magic));
+#endif
+ xfs_trans_brelse(tp, bp);
+ return XFS_ERROR(EFSCORRUPTED);
+ }
+ }
+
+ xfs_inobp_check(mp, bp);
+
+ /*
+ * Mark the buffer as an inode buffer now that it looks good
+ */
+ XFS_BUF_SET_VTYPE(bp, B_FS_INO);
+
+ *bpp = bp;
+ return 0;
+}
+
+/*
* This routine is called to map an inode number within a file
* system to the buffer containing the on-disk version of the
* inode. It returns a pointer to the buffer containing the
@@ -147,72 +230,19 @@
xfs_buf_t **bpp,
int *offset)
{
- int di_ok;
xfs_imap_t imap;
xfs_buf_t *bp;
int error;
- xfs_dinode_t *dip;
- /*
- * Call the space management code to find the location of the
- * inode on disk.
- */
imap.im_blkno = 0;
error = xfs_imap(mp, tp, ino, &imap, XFS_IMAP_LOOKUP);
- if (error != 0) {
- cmn_err(CE_WARN,
- "xfs_inotobp: xfs_imap() returned an "
- "error %d on %s. Returning error.", error, mp->m_fsname);
+ if (error)
return error;
- }
- /*
- * If the inode number maps to a block outside the bounds of the
- * file system then return NULL rather than calling read_buf
- * and panicing when we get an error from the driver.
- */
- if ((imap.im_blkno + imap.im_len) >
- XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)) {
- cmn_err(CE_WARN,
- "xfs_inotobp: inode number (%llu + %d) maps to a block outside the bounds "
- "of the file system %s. Returning EINVAL.",
- (unsigned long long)imap.im_blkno,
- imap.im_len, mp->m_fsname);
- return XFS_ERROR(EINVAL);
- }
-
- /*
- * Read in the buffer. If tp is NULL, xfs_trans_read_buf() will
- * default to just a read_buf() call.
- */
- error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, imap.im_blkno,
- (int)imap.im_len, XFS_BUF_LOCK, &bp);
-
- if (error) {
- cmn_err(CE_WARN,
- "xfs_inotobp: xfs_trans_read_buf() returned an "
- "error %d on %s. Returning error.", error, mp->m_fsname);
+ error = xfs_imap_to_bp(mp, tp, &imap, &bp, XFS_BUF_LOCK, 0);
+ if (error)
return error;
- }
- dip = (xfs_dinode_t *)xfs_buf_offset(bp, 0);
- di_ok =
- be16_to_cpu(dip->di_core.di_magic) == XFS_DINODE_MAGIC &&
- XFS_DINODE_GOOD_VERSION(dip->di_core.di_version);
- if (unlikely(XFS_TEST_ERROR(!di_ok, mp, XFS_ERRTAG_ITOBP_INOTOBP,
- XFS_RANDOM_ITOBP_INOTOBP))) {
- XFS_CORRUPTION_ERROR("xfs_inotobp", XFS_ERRLEVEL_LOW, mp, dip);
- xfs_trans_brelse(tp, bp);
- cmn_err(CE_WARN,
- "xfs_inotobp: XFS_TEST_ERROR() returned an "
- "error on %s. Returning EFSCORRUPTED.", mp->m_fsname);
- return XFS_ERROR(EFSCORRUPTED);
- }
- xfs_inobp_check(mp, bp);
-
- /*
- * Set *dipp to point to the on-disk inode in the buffer.
- */
*dipp = (xfs_dinode_t *)xfs_buf_offset(bp, imap.im_boffset);
*bpp = bp;
*offset = imap.im_boffset;
@@ -248,46 +278,21 @@
xfs_dinode_t **dipp,
xfs_buf_t **bpp,
xfs_daddr_t bno,
- uint imap_flags)
+ uint imap_flags,
+ uint buf_flags)
{
xfs_imap_t imap;
xfs_buf_t *bp;
int error;
- int i;
- int ni;
if (ip->i_blkno == (xfs_daddr_t)0) {
- /*
- * Call the space management code to find the location of the
- * inode on disk.
- */
imap.im_blkno = bno;
- if ((error = xfs_imap(mp, tp, ip->i_ino, &imap,
- XFS_IMAP_LOOKUP | imap_flags)))
+ error = xfs_imap(mp, tp, ip->i_ino, &imap,
+ XFS_IMAP_LOOKUP | imap_flags);
+ if (error)
return error;
/*
- * If the inode number maps to a block outside the bounds
- * of the file system then return NULL rather than calling
- * read_buf and panicing when we get an error from the
- * driver.
- */
- if ((imap.im_blkno + imap.im_len) >
- XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)) {
-#ifdef DEBUG
- xfs_fs_cmn_err(CE_ALERT, mp, "xfs_itobp: "
- "(imap.im_blkno (0x%llx) "
- "+ imap.im_len (0x%llx)) > "
- " XFS_FSB_TO_BB(mp, "
- "mp->m_sb.sb_dblocks) (0x%llx)",
- (unsigned long long) imap.im_blkno,
- (unsigned long long) imap.im_len,
- XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks));
-#endif /* DEBUG */
- return XFS_ERROR(EINVAL);
- }
-
- /*
* Fill in the fields in the inode that will be used to
* map the inode to its buffer from now on.
*/
@@ -305,76 +310,17 @@
}
ASSERT(bno == 0 || bno == imap.im_blkno);
- /*
- * Read in the buffer. If tp is NULL, xfs_trans_read_buf() will
- * default to just a read_buf() call.
- */
- error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp, imap.im_blkno,
- (int)imap.im_len, XFS_BUF_LOCK, &bp);
- if (error) {
-#ifdef DEBUG
- xfs_fs_cmn_err(CE_ALERT, mp, "xfs_itobp: "
- "xfs_trans_read_buf() returned error %d, "
- "imap.im_blkno 0x%llx, imap.im_len 0x%llx",
- error, (unsigned long long) imap.im_blkno,
- (unsigned long long) imap.im_len);
-#endif /* DEBUG */
+ error = xfs_imap_to_bp(mp, tp, &imap, &bp, buf_flags, imap_flags);
+ if (error)
return error;
+
+ if (!bp) {
+ ASSERT(buf_flags & XFS_BUF_TRYLOCK);
+ ASSERT(tp == NULL);
+ *bpp = NULL;
+ return EAGAIN;
}
- /*
- * Validate the magic number and version of every inode in the buffer
- * (if DEBUG kernel) or the first inode in the buffer, otherwise.
- * No validation is done here in userspace (xfs_repair).
- */
-#if !defined(__KERNEL__)
- ni = 0;
-#elif defined(DEBUG)
- ni = BBTOB(imap.im_len) >> mp->m_sb.sb_inodelog;
-#else /* usual case */
- ni = 1;
-#endif
-
- for (i = 0; i < ni; i++) {
- int di_ok;
- xfs_dinode_t *dip;
-
- dip = (xfs_dinode_t *)xfs_buf_offset(bp,
- (i << mp->m_sb.sb_inodelog));
- di_ok = be16_to_cpu(dip->di_core.di_magic) == XFS_DINODE_MAGIC &&
- XFS_DINODE_GOOD_VERSION(dip->di_core.di_version);
- if (unlikely(XFS_TEST_ERROR(!di_ok, mp,
- XFS_ERRTAG_ITOBP_INOTOBP,
- XFS_RANDOM_ITOBP_INOTOBP))) {
- if (imap_flags & XFS_IMAP_BULKSTAT) {
- xfs_trans_brelse(tp, bp);
- return XFS_ERROR(EINVAL);
- }
-#ifdef DEBUG
- cmn_err(CE_ALERT,
- "Device %s - bad inode magic/vsn "
- "daddr %lld #%d (magic=%x)",
- XFS_BUFTARG_NAME(mp->m_ddev_targp),
- (unsigned long long)imap.im_blkno, i,
- be16_to_cpu(dip->di_core.di_magic));
-#endif
- XFS_CORRUPTION_ERROR("xfs_itobp", XFS_ERRLEVEL_HIGH,
- mp, dip);
- xfs_trans_brelse(tp, bp);
- return XFS_ERROR(EFSCORRUPTED);
- }
- }
-
- xfs_inobp_check(mp, bp);
-
- /*
- * Mark the buffer as an inode buffer now that it looks good
- */
- XFS_BUF_SET_VTYPE(bp, B_FS_INO);
-
- /*
- * Set *dipp to point to the on-disk inode in the buffer.
- */
*dipp = (xfs_dinode_t *)xfs_buf_offset(bp, imap.im_boffset);
*bpp = bp;
return 0;
@@ -878,7 +824,7 @@
* return NULL as well. Set i_blkno to 0 so that xfs_itobp() will
* know that this is a new incore inode.
*/
- error = xfs_itobp(mp, tp, ip, &dip, &bp, bno, imap_flags);
+ error = xfs_itobp(mp, tp, ip, &dip, &bp, bno, imap_flags, XFS_BUF_LOCK);
if (error) {
kmem_zone_free(xfs_inode_zone, ip);
return error;
@@ -1147,7 +1093,7 @@
* the inode version number now. This way we only do the conversion
* here rather than here and in the flush/logging code.
*/
- if (XFS_SB_VERSION_HASNLINK(&tp->t_mountp->m_sb) &&
+ if (xfs_sb_version_hasnlink(&tp->t_mountp->m_sb) &&
ip->i_d.di_version == XFS_DINODE_VERSION_1) {
ip->i_d.di_version = XFS_DINODE_VERSION_2;
/*
@@ -1518,51 +1464,50 @@
}
/*
- * Shrink the file to the given new_size. The new
- * size must be smaller than the current size.
- * This will free up the underlying blocks
- * in the removed range after a call to xfs_itruncate_start()
- * or xfs_atruncate_start().
+ * Shrink the file to the given new_size. The new size must be smaller than
+ * the current size. This will free up the underlying blocks in the removed
+ * range after a call to xfs_itruncate_start() or xfs_atruncate_start().
*
- * The transaction passed to this routine must have made
- * a permanent log reservation of at least XFS_ITRUNCATE_LOG_RES.
- * This routine may commit the given transaction and
- * start new ones, so make sure everything involved in
- * the transaction is tidy before calling here.
- * Some transaction will be returned to the caller to be
- * committed. The incoming transaction must already include
- * the inode, and both inode locks must be held exclusively.
- * The inode must also be "held" within the transaction. On
- * return the inode will be "held" within the returned transaction.
- * This routine does NOT require any disk space to be reserved
- * for it within the transaction.
+ * The transaction passed to this routine must have made a permanent log
+ * reservation of at least XFS_ITRUNCATE_LOG_RES. This routine may commit the
+ * given transaction and start new ones, so make sure everything involved in
+ * the transaction is tidy before calling here. Some transaction will be
+ * returned to the caller to be committed. The incoming transaction must
+ * already include the inode, and both inode locks must be held exclusively.
+ * The inode must also be "held" within the transaction. On return the inode
+ * will be "held" within the returned transaction. This routine does NOT
+ * require any disk space to be reserved for it within the transaction.
*
- * The fork parameter must be either xfs_attr_fork or xfs_data_fork,
- * and it indicates the fork which is to be truncated. For the
- * attribute fork we only support truncation to size 0.
+ * The fork parameter must be either xfs_attr_fork or xfs_data_fork, and it
+ * indicates the fork which is to be truncated. For the attribute fork we only
+ * support truncation to size 0.
*
- * We use the sync parameter to indicate whether or not the first
- * transaction we perform might have to be synchronous. For the attr fork,
- * it needs to be so if the unlink of the inode is not yet known to be
- * permanent in the log. This keeps us from freeing and reusing the
- * blocks of the attribute fork before the unlink of the inode becomes
- * permanent.
+ * We use the sync parameter to indicate whether or not the first transaction
+ * we perform might have to be synchronous. For the attr fork, it needs to be
+ * so if the unlink of the inode is not yet known to be permanent in the log.
+ * This keeps us from freeing and reusing the blocks of the attribute fork
+ * before the unlink of the inode becomes permanent.
*
- * For the data fork, we normally have to run synchronously if we're
- * being called out of the inactive path or we're being called
- * out of the create path where we're truncating an existing file.
- * Either way, the truncate needs to be sync so blocks don't reappear
- * in the file with altered data in case of a crash. wsync filesystems
- * can run the first case async because anything that shrinks the inode
- * has to run sync so by the time we're called here from inactive, the
- * inode size is permanently set to 0.
+ * For the data fork, we normally have to run synchronously if we're being
+ * called out of the inactive path or we're being called out of the create path
+ * where we're truncating an existing file. Either way, the truncate needs to
+ * be sync so blocks don't reappear in the file with altered data in case of a
+ * crash. wsync filesystems can run the first case async because anything that
+ * shrinks the inode has to run sync so by the time we're called here from
+ * inactive, the inode size is permanently set to 0.
*
- * Calls from the truncate path always need to be sync unless we're
- * in a wsync filesystem and the file has already been unlinked.
+ * Calls from the truncate path always need to be sync unless we're in a wsync
+ * filesystem and the file has already been unlinked.
*
- * The caller is responsible for correctly setting the sync parameter.
- * It gets too hard for us to guess here which path we're being called
- * out of just based on inode state.
+ * The caller is responsible for correctly setting the sync parameter. It gets
+ * too hard for us to guess here which path we're being called out of just
+ * based on inode state.
+ *
+ * If we get an error, we must return with the inode locked and linked into the
+ * current transaction. This keeps things simple for the higher level code,
+ * because it always knows that the inode is locked and held in the transaction
+ * that returns to it whether errors occur or not. We don't mark the inode
+ * dirty on error so that transactions can be easily aborted if possible.
*/
int
xfs_itruncate_finish(
@@ -1741,65 +1686,51 @@
*/
error = xfs_bmap_finish(tp, &free_list, &committed);
ntp = *tp;
+ if (committed) {
+ /* link the inode into the next xact in the chain */
+ xfs_trans_ijoin(ntp, ip,
+ XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ xfs_trans_ihold(ntp, ip);
+ }
+
if (error) {
/*
- * If the bmap finish call encounters an error,
- * return to the caller where the transaction
- * can be properly aborted. We just need to
- * make sure we're not holding any resources
- * that we were not when we came in.
+ * If the bmap finish call encounters an error, return
+ * to the caller where the transaction can be properly
+ * aborted. We just need to make sure we're not
+ * holding any resources that we were not when we came
+ * in.
*
- * Aborting from this point might lose some
- * blocks in the file system, but oh well.
+ * Aborting from this point might lose some blocks in
+ * the file system, but oh well.
*/
xfs_bmap_cancel(&free_list);
- if (committed) {
- /*
- * If the passed in transaction committed
- * in xfs_bmap_finish(), then we want to
- * add the inode to this one before returning.
- * This keeps things simple for the higher
- * level code, because it always knows that
- * the inode is locked and held in the
- * transaction that returns to it whether
- * errors occur or not. We don't mark the
- * inode dirty so that this transaction can
- * be easily aborted if possible.
- */
- xfs_trans_ijoin(ntp, ip,
- XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- xfs_trans_ihold(ntp, ip);
- }
return error;
}
if (committed) {
/*
- * The first xact was committed,
- * so add the inode to the new one.
- * Mark it dirty so it will be logged
- * and moved forward in the log as
- * part of every commit.
+ * Mark the inode dirty so it will be logged and
+ * moved forward in the log as part of every commit.
*/
- xfs_trans_ijoin(ntp, ip,
- XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- xfs_trans_ihold(ntp, ip);
xfs_trans_log_inode(ntp, ip, XFS_ILOG_CORE);
}
+
ntp = xfs_trans_dup(ntp);
- (void) xfs_trans_commit(*tp, 0);
+ error = xfs_trans_commit(*tp, 0);
*tp = ntp;
- error = xfs_trans_reserve(ntp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0,
- XFS_TRANS_PERM_LOG_RES,
- XFS_ITRUNCATE_LOG_COUNT);
- /*
- * Add the inode being truncated to the next chained
- * transaction.
- */
+
+ /* link the inode into the next transaction in the chain */
xfs_trans_ijoin(ntp, ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
xfs_trans_ihold(ntp, ip);
+
+ if (!error)
+ error = xfs_trans_reserve(ntp, 0,
+ XFS_ITRUNCATE_LOG_RES(mp), 0,
+ XFS_TRANS_PERM_LOG_RES,
+ XFS_ITRUNCATE_LOG_COUNT);
if (error)
- return (error);
+ return error;
}
/*
* Only update the size in the case of the data fork, but
@@ -1967,7 +1898,7 @@
* Here we put the head pointer into our next pointer,
* and then we fall through to point the head at us.
*/
- error = xfs_itobp(mp, tp, ip, &dip, &ibp, 0, 0);
+ error = xfs_itobp(mp, tp, ip, &dip, &ibp, 0, 0, XFS_BUF_LOCK);
if (error)
return error;
@@ -2075,7 +2006,7 @@
* of dealing with the buffer when there is no need to
* change it.
*/
- error = xfs_itobp(mp, tp, ip, &dip, &ibp, 0, 0);
+ error = xfs_itobp(mp, tp, ip, &dip, &ibp, 0, 0, XFS_BUF_LOCK);
if (error) {
cmn_err(CE_WARN,
"xfs_iunlink_remove: xfs_itobp() returned an error %d on %s. Returning error.",
@@ -2137,7 +2068,7 @@
* Now last_ibp points to the buffer previous to us on
* the unlinked list. Pull us from the list.
*/
- error = xfs_itobp(mp, tp, ip, &dip, &ibp, 0, 0);
+ error = xfs_itobp(mp, tp, ip, &dip, &ibp, 0, 0, XFS_BUF_LOCK);
if (error) {
cmn_err(CE_WARN,
"xfs_iunlink_remove: xfs_itobp() returned an error %d on %s. Returning error.",
@@ -2172,13 +2103,6 @@
return 0;
}
-STATIC_INLINE int xfs_inode_clean(xfs_inode_t *ip)
-{
- return (((ip->i_itemp == NULL) ||
- !(ip->i_itemp->ili_format.ilf_fields & XFS_ILOG_ALL)) &&
- (ip->i_update_core == 0));
-}
-
STATIC void
xfs_ifree_cluster(
xfs_inode_t *free_ip,
@@ -2400,7 +2324,7 @@
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- error = xfs_itobp(ip->i_mount, tp, ip, &dip, &ibp, 0, 0);
+ error = xfs_itobp(ip->i_mount, tp, ip, &dip, &ibp, 0, 0, XFS_BUF_LOCK);
if (error)
return error;
@@ -2678,14 +2602,31 @@
fsbno = imap->im_blkno ?
XFS_DADDR_TO_FSB(mp, imap->im_blkno) : NULLFSBLOCK;
error = xfs_dilocate(mp, tp, ino, &fsbno, &len, &off, flags);
- if (error != 0) {
+ if (error)
return error;
- }
+
imap->im_blkno = XFS_FSB_TO_DADDR(mp, fsbno);
imap->im_len = XFS_FSB_TO_BB(mp, len);
imap->im_agblkno = XFS_FSB_TO_AGBNO(mp, fsbno);
imap->im_ioffset = (ushort)off;
imap->im_boffset = (ushort)(off << mp->m_sb.sb_inodelog);
+
+ /*
+ * If the inode number maps to a block outside the bounds
+ * of the file system then return NULL rather than calling
+ * read_buf and panicing when we get an error from the
+ * driver.
+ */
+ if ((imap->im_blkno + imap->im_len) >
+ XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)) {
+ xfs_fs_cmn_err(CE_ALERT, mp, "xfs_imap: "
+ "(imap->im_blkno (0x%llx) + imap->im_len (0x%llx)) > "
+ " XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks) (0x%llx)",
+ (unsigned long long) imap->im_blkno,
+ (unsigned long long) imap->im_len,
+ XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks));
+ return EINVAL;
+ }
return 0;
}
@@ -2826,38 +2767,41 @@
}
/*
- * This is called to wait for the given inode to be unpinned.
- * It will sleep until this happens. The caller must have the
- * inode locked in at least shared mode so that the buffer cannot
- * be subsequently pinned once someone is waiting for it to be
- * unpinned.
+ * This is called to unpin an inode. It can be directed to wait or to return
+ * immediately without waiting for the inode to be unpinned. The caller must
+ * have the inode locked in at least shared mode so that the buffer cannot be
+ * subsequently pinned once someone is waiting for it to be unpinned.
*/
STATIC void
+__xfs_iunpin_wait(
+ xfs_inode_t *ip,
+ int wait)
+{
+ xfs_inode_log_item_t *iip = ip->i_itemp;
+
+ ASSERT(ismrlocked(&ip->i_lock, MR_UPDATE | MR_ACCESS));
+ if (atomic_read(&ip->i_pincount) == 0)
+ return;
+
+ /* Give the log a push to start the unpinning I/O */
+ xfs_log_force(ip->i_mount, (iip && iip->ili_last_lsn) ?
+ iip->ili_last_lsn : 0, XFS_LOG_FORCE);
+ if (wait)
+ wait_event(ip->i_ipin_wait, (atomic_read(&ip->i_pincount) == 0));
+}
+
+static inline void
xfs_iunpin_wait(
xfs_inode_t *ip)
{
- xfs_inode_log_item_t *iip;
- xfs_lsn_t lsn;
+ __xfs_iunpin_wait(ip, 1);
+}
- ASSERT(ismrlocked(&ip->i_lock, MR_UPDATE | MR_ACCESS));
-
- if (atomic_read(&ip->i_pincount) == 0) {
- return;
- }
-
- iip = ip->i_itemp;
- if (iip && iip->ili_last_lsn) {
- lsn = iip->ili_last_lsn;
- } else {
- lsn = (xfs_lsn_t)0;
- }
-
- /*
- * Give the log a push so we don't wait here too long.
- */
- xfs_log_force(ip->i_mount, lsn, XFS_LOG_FORCE);
-
- wait_event(ip->i_ipin_wait, (atomic_read(&ip->i_pincount) == 0));
+static inline void
+xfs_iunpin_nowait(
+ xfs_inode_t *ip)
+{
+ __xfs_iunpin_wait(ip, 0);
}
@@ -2932,7 +2876,7 @@
* format indicates the current state of the fork.
*/
/*ARGSUSED*/
-STATIC int
+STATIC void
xfs_iflush_fork(
xfs_inode_t *ip,
xfs_dinode_t *dip,
@@ -2953,16 +2897,16 @@
static const short extflag[2] =
{ XFS_ILOG_DEXT, XFS_ILOG_AEXT };
- if (iip == NULL)
- return 0;
+ if (!iip)
+ return;
ifp = XFS_IFORK_PTR(ip, whichfork);
/*
* This can happen if we gave up in iformat in an error path,
* for the attribute fork.
*/
- if (ifp == NULL) {
+ if (!ifp) {
ASSERT(whichfork == XFS_ATTR_FORK);
- return 0;
+ return;
}
cp = XFS_DFORK_PTR(dip, whichfork);
mp = ip->i_mount;
@@ -3023,8 +2967,145 @@
ASSERT(0);
break;
}
+}
+STATIC int
+xfs_iflush_cluster(
+ xfs_inode_t *ip,
+ xfs_buf_t *bp)
+{
+ xfs_mount_t *mp = ip->i_mount;
+ xfs_perag_t *pag = xfs_get_perag(mp, ip->i_ino);
+ unsigned long first_index, mask;
+ int ilist_size;
+ xfs_inode_t **ilist;
+ xfs_inode_t *iq;
+ int nr_found;
+ int clcount = 0;
+ int bufwasdelwri;
+ int i;
+
+ ASSERT(pag->pagi_inodeok);
+ ASSERT(pag->pag_ici_init);
+
+ ilist_size = XFS_INODE_CLUSTER_SIZE(mp) * sizeof(xfs_inode_t *);
+ ilist = kmem_alloc(ilist_size, KM_MAYFAIL);
+ if (!ilist)
+ return 0;
+
+ mask = ~(((XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog)) - 1);
+ first_index = XFS_INO_TO_AGINO(mp, ip->i_ino) & mask;
+ read_lock(&pag->pag_ici_lock);
+ /* really need a gang lookup range call here */
+ nr_found = radix_tree_gang_lookup(&pag->pag_ici_root, (void**)ilist,
+ first_index,
+ XFS_INODE_CLUSTER_SIZE(mp));
+ if (nr_found == 0)
+ goto out_free;
+
+ for (i = 0; i < nr_found; i++) {
+ iq = ilist[i];
+ if (iq == ip)
+ continue;
+ /* if the inode lies outside this cluster, we're done. */
+ if ((XFS_INO_TO_AGINO(mp, iq->i_ino) & mask) != first_index)
+ break;
+ /*
+ * Do an un-protected check to see if the inode is dirty and
+ * is a candidate for flushing. These checks will be repeated
+ * later after the appropriate locks are acquired.
+ */
+ if (xfs_inode_clean(iq) && xfs_ipincount(iq) == 0)
+ continue;
+
+ /*
+ * Try to get locks. If any are unavailable or it is pinned,
+ * then this inode cannot be flushed and is skipped.
+ */
+
+ if (!xfs_ilock_nowait(iq, XFS_ILOCK_SHARED))
+ continue;
+ if (!xfs_iflock_nowait(iq)) {
+ xfs_iunlock(iq, XFS_ILOCK_SHARED);
+ continue;
+ }
+ if (xfs_ipincount(iq)) {
+ xfs_ifunlock(iq);
+ xfs_iunlock(iq, XFS_ILOCK_SHARED);
+ continue;
+ }
+
+ /*
+ * arriving here means that this inode can be flushed. First
+ * re-check that it's dirty before flushing.
+ */
+ if (!xfs_inode_clean(iq)) {
+ int error;
+ error = xfs_iflush_int(iq, bp);
+ if (error) {
+ xfs_iunlock(iq, XFS_ILOCK_SHARED);
+ goto cluster_corrupt_out;
+ }
+ clcount++;
+ } else {
+ xfs_ifunlock(iq);
+ }
+ xfs_iunlock(iq, XFS_ILOCK_SHARED);
+ }
+
+ if (clcount) {
+ XFS_STATS_INC(xs_icluster_flushcnt);
+ XFS_STATS_ADD(xs_icluster_flushinode, clcount);
+ }
+
+out_free:
+ read_unlock(&pag->pag_ici_lock);
+ kmem_free(ilist, ilist_size);
return 0;
+
+
+cluster_corrupt_out:
+ /*
+ * Corruption detected in the clustering loop. Invalidate the
+ * inode buffer and shut down the filesystem.
+ */
+ read_unlock(&pag->pag_ici_lock);
+ /*
+ * Clean up the buffer. If it was B_DELWRI, just release it --
+ * brelse can handle it with no problems. If not, shut down the
+ * filesystem before releasing the buffer.
+ */
+ bufwasdelwri = XFS_BUF_ISDELAYWRITE(bp);
+ if (bufwasdelwri)
+ xfs_buf_relse(bp);
+
+ xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
+
+ if (!bufwasdelwri) {
+ /*
+ * Just like incore_relse: if we have b_iodone functions,
+ * mark the buffer as an error and call them. Otherwise
+ * mark it as stale and brelse.
+ */
+ if (XFS_BUF_IODONE_FUNC(bp)) {
+ XFS_BUF_CLR_BDSTRAT_FUNC(bp);
+ XFS_BUF_UNDONE(bp);
+ XFS_BUF_STALE(bp);
+ XFS_BUF_SHUT(bp);
+ XFS_BUF_ERROR(bp,EIO);
+ xfs_biodone(bp);
+ } else {
+ XFS_BUF_STALE(bp);
+ xfs_buf_relse(bp);
+ }
+ }
+
+ /*
+ * Unlocks the flush lock
+ */
+ xfs_iflush_abort(iq);
+ kmem_free(ilist, ilist_size);
+ return XFS_ERROR(EFSCORRUPTED);
}
/*
@@ -3046,11 +3127,7 @@
xfs_dinode_t *dip;
xfs_mount_t *mp;
int error;
- /* REFERENCED */
- xfs_inode_t *iq;
- int clcount; /* count of inodes clustered */
- int bufwasdelwri;
- struct hlist_node *entry;
+ int noblock = (flags == XFS_IFLUSH_ASYNC_NOBLOCK);
enum { INT_DELWRI = (1 << 0), INT_ASYNC = (1 << 1) };
XFS_STATS_INC(xs_iflush_count);
@@ -3067,8 +3144,7 @@
* If the inode isn't dirty, then just release the inode
* flush lock and do nothing.
*/
- if ((ip->i_update_core == 0) &&
- ((iip == NULL) || !(iip->ili_format.ilf_fields & XFS_ILOG_ALL))) {
+ if (xfs_inode_clean(ip)) {
ASSERT((iip != NULL) ?
!(iip->ili_item.li_flags & XFS_LI_IN_AIL) : 1);
xfs_ifunlock(ip);
@@ -3076,11 +3152,21 @@
}
/*
- * We can't flush the inode until it is unpinned, so
- * wait for it. We know noone new can pin it, because
- * we are holding the inode lock shared and you need
- * to hold it exclusively to pin the inode.
+ * We can't flush the inode until it is unpinned, so wait for it if we
+ * are allowed to block. We know noone new can pin it, because we are
+ * holding the inode lock shared and you need to hold it exclusively to
+ * pin the inode.
+ *
+ * If we are not allowed to block, force the log out asynchronously so
+ * that when we come back the inode will be unpinned. If other inodes
+ * in the same cluster are dirty, they will probably write the inode
+ * out for us if they occur after the log force completes.
*/
+ if (noblock && xfs_ipincount(ip)) {
+ xfs_iunpin_nowait(ip);
+ xfs_ifunlock(ip);
+ return EAGAIN;
+ }
xfs_iunpin_wait(ip);
/*
@@ -3097,15 +3183,6 @@
}
/*
- * Get the buffer containing the on-disk inode.
- */
- error = xfs_itobp(mp, NULL, ip, &dip, &bp, 0, 0);
- if (error) {
- xfs_ifunlock(ip);
- return error;
- }
-
- /*
* Decide how buffer will be flushed out. This is done before
* the call to xfs_iflush_int because this field is zeroed by it.
*/
@@ -3121,6 +3198,7 @@
case XFS_IFLUSH_DELWRI_ELSE_SYNC:
flags = 0;
break;
+ case XFS_IFLUSH_ASYNC_NOBLOCK:
case XFS_IFLUSH_ASYNC:
case XFS_IFLUSH_DELWRI_ELSE_ASYNC:
flags = INT_ASYNC;
@@ -3140,6 +3218,7 @@
case XFS_IFLUSH_DELWRI:
flags = INT_DELWRI;
break;
+ case XFS_IFLUSH_ASYNC_NOBLOCK:
case XFS_IFLUSH_ASYNC:
flags = INT_ASYNC;
break;
@@ -3154,94 +3233,41 @@
}
/*
+ * Get the buffer containing the on-disk inode.
+ */
+ error = xfs_itobp(mp, NULL, ip, &dip, &bp, 0, 0,
+ noblock ? XFS_BUF_TRYLOCK : XFS_BUF_LOCK);
+ if (error || !bp) {
+ xfs_ifunlock(ip);
+ return error;
+ }
+
+ /*
* First flush out the inode that xfs_iflush was called with.
*/
error = xfs_iflush_int(ip, bp);
- if (error) {
+ if (error)
goto corrupt_out;
- }
+
+ /*
+ * If the buffer is pinned then push on the log now so we won't
+ * get stuck waiting in the write for too long.
+ */
+ if (XFS_BUF_ISPINNED(bp))
+ xfs_log_force(mp, (xfs_lsn_t)0, XFS_LOG_FORCE);
/*
* inode clustering:
* see if other inodes can be gathered into this write
*/
- spin_lock(&ip->i_cluster->icl_lock);
- ip->i_cluster->icl_buf = bp;
-
- clcount = 0;
- hlist_for_each_entry(iq, entry, &ip->i_cluster->icl_inodes, i_cnode) {
- if (iq == ip)
- continue;
-
- /*
- * Do an un-protected check to see if the inode is dirty and
- * is a candidate for flushing. These checks will be repeated
- * later after the appropriate locks are acquired.
- */
- iip = iq->i_itemp;
- if ((iq->i_update_core == 0) &&
- ((iip == NULL) ||
- !(iip->ili_format.ilf_fields & XFS_ILOG_ALL)) &&
- xfs_ipincount(iq) == 0) {
- continue;
- }
-
- /*
- * Try to get locks. If any are unavailable,
- * then this inode cannot be flushed and is skipped.
- */
-
- /* get inode locks (just i_lock) */
- if (xfs_ilock_nowait(iq, XFS_ILOCK_SHARED)) {
- /* get inode flush lock */
- if (xfs_iflock_nowait(iq)) {
- /* check if pinned */
- if (xfs_ipincount(iq) == 0) {
- /* arriving here means that
- * this inode can be flushed.
- * first re-check that it's
- * dirty
- */
- iip = iq->i_itemp;
- if ((iq->i_update_core != 0)||
- ((iip != NULL) &&
- (iip->ili_format.ilf_fields & XFS_ILOG_ALL))) {
- clcount++;
- error = xfs_iflush_int(iq, bp);
- if (error) {
- xfs_iunlock(iq,
- XFS_ILOCK_SHARED);
- goto cluster_corrupt_out;
- }
- } else {
- xfs_ifunlock(iq);
- }
- } else {
- xfs_ifunlock(iq);
- }
- }
- xfs_iunlock(iq, XFS_ILOCK_SHARED);
- }
- }
- spin_unlock(&ip->i_cluster->icl_lock);
-
- if (clcount) {
- XFS_STATS_INC(xs_icluster_flushcnt);
- XFS_STATS_ADD(xs_icluster_flushinode, clcount);
- }
-
- /*
- * If the buffer is pinned then push on the log so we won't
- * get stuck waiting in the write for too long.
- */
- if (XFS_BUF_ISPINNED(bp)){
- xfs_log_force(mp, (xfs_lsn_t)0, XFS_LOG_FORCE);
- }
+ error = xfs_iflush_cluster(ip, bp);
+ if (error)
+ goto cluster_corrupt_out;
if (flags & INT_DELWRI) {
xfs_bdwrite(mp, bp);
} else if (flags & INT_ASYNC) {
- xfs_bawrite(mp, bp);
+ error = xfs_bawrite(mp, bp);
} else {
error = xfs_bwrite(mp, bp);
}
@@ -3250,52 +3276,11 @@
corrupt_out:
xfs_buf_relse(bp);
xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
- xfs_iflush_abort(ip);
- /*
- * Unlocks the flush lock
- */
- return XFS_ERROR(EFSCORRUPTED);
-
cluster_corrupt_out:
- /* Corruption detected in the clustering loop. Invalidate the
- * inode buffer and shut down the filesystem.
- */
- spin_unlock(&ip->i_cluster->icl_lock);
-
- /*
- * Clean up the buffer. If it was B_DELWRI, just release it --
- * brelse can handle it with no problems. If not, shut down the
- * filesystem before releasing the buffer.
- */
- if ((bufwasdelwri= XFS_BUF_ISDELAYWRITE(bp))) {
- xfs_buf_relse(bp);
- }
-
- xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-
- if(!bufwasdelwri) {
- /*
- * Just like incore_relse: if we have b_iodone functions,
- * mark the buffer as an error and call them. Otherwise
- * mark it as stale and brelse.
- */
- if (XFS_BUF_IODONE_FUNC(bp)) {
- XFS_BUF_CLR_BDSTRAT_FUNC(bp);
- XFS_BUF_UNDONE(bp);
- XFS_BUF_STALE(bp);
- XFS_BUF_SHUT(bp);
- XFS_BUF_ERROR(bp,EIO);
- xfs_biodone(bp);
- } else {
- XFS_BUF_STALE(bp);
- xfs_buf_relse(bp);
- }
- }
-
- xfs_iflush_abort(iq);
/*
* Unlocks the flush lock
*/
+ xfs_iflush_abort(ip);
return XFS_ERROR(EFSCORRUPTED);
}
@@ -3325,8 +3310,7 @@
* If the inode isn't dirty, then just release the inode
* flush lock and do nothing.
*/
- if ((ip->i_update_core == 0) &&
- ((iip == NULL) || !(iip->ili_format.ilf_fields & XFS_ILOG_ALL))) {
+ if (xfs_inode_clean(ip)) {
xfs_ifunlock(ip);
return 0;
}
@@ -3434,9 +3418,9 @@
* has been updated, then make the conversion permanent.
*/
ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1 ||
- XFS_SB_VERSION_HASNLINK(&mp->m_sb));
+ xfs_sb_version_hasnlink(&mp->m_sb));
if (ip->i_d.di_version == XFS_DINODE_VERSION_1) {
- if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
+ if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
/*
* Convert it back.
*/
@@ -3459,16 +3443,9 @@
}
}
- if (xfs_iflush_fork(ip, dip, iip, XFS_DATA_FORK, bp) == EFSCORRUPTED) {
- goto corrupt_out;
- }
-
- if (XFS_IFORK_Q(ip)) {
- /*
- * The only error from xfs_iflush_fork is on the data fork.
- */
- (void) xfs_iflush_fork(ip, dip, iip, XFS_ATTR_FORK, bp);
- }
+ xfs_iflush_fork(ip, dip, iip, XFS_DATA_FORK, bp);
+ if (XFS_IFORK_Q(ip))
+ xfs_iflush_fork(ip, dip, iip, XFS_ATTR_FORK, bp);
xfs_inobp_check(mp, bp);
/*
diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h
index bfcd72c..93c3769 100644
--- a/fs/xfs/xfs_inode.h
+++ b/fs/xfs/xfs_inode.h
@@ -133,19 +133,6 @@
} dm_attrs_t;
/*
- * This is the xfs inode cluster structure. This structure is used by
- * xfs_iflush to find inodes that share a cluster and can be flushed to disk at
- * the same time.
- */
-typedef struct xfs_icluster {
- struct hlist_head icl_inodes; /* list of inodes on cluster */
- xfs_daddr_t icl_blkno; /* starting block number of
- * the cluster */
- struct xfs_buf *icl_buf; /* the inode buffer */
- spinlock_t icl_lock; /* inode list lock */
-} xfs_icluster_t;
-
-/*
* This is the xfs in-core inode structure.
* Most of the on-disk inode is embedded in the i_d field.
*
@@ -240,10 +227,6 @@
atomic_t i_pincount; /* inode pin count */
wait_queue_head_t i_ipin_wait; /* inode pinning wait queue */
spinlock_t i_flags_lock; /* inode i_flags lock */
-#ifdef HAVE_REFCACHE
- struct xfs_inode **i_refcache; /* ptr to entry in ref cache */
- struct xfs_inode *i_release; /* inode to unref */
-#endif
/* Miscellaneous state. */
unsigned short i_flags; /* see defined flags below */
unsigned char i_update_core; /* timestamps/size is dirty */
@@ -252,8 +235,6 @@
unsigned int i_delayed_blks; /* count of delay alloc blks */
xfs_icdinode_t i_d; /* most of ondisk inode */
- xfs_icluster_t *i_cluster; /* cluster list header */
- struct hlist_node i_cnode; /* cluster link node */
xfs_fsize_t i_size; /* in-memory size */
xfs_fsize_t i_new_size; /* size when write completes */
@@ -461,6 +442,7 @@
#define XFS_IFLUSH_SYNC 3
#define XFS_IFLUSH_ASYNC 4
#define XFS_IFLUSH_DELWRI 5
+#define XFS_IFLUSH_ASYNC_NOBLOCK 6
/*
* Flags for xfs_itruncate_start().
@@ -515,7 +497,7 @@
*/
int xfs_itobp(struct xfs_mount *, struct xfs_trans *,
xfs_inode_t *, struct xfs_dinode **, struct xfs_buf **,
- xfs_daddr_t, uint);
+ xfs_daddr_t, uint, uint);
int xfs_iread(struct xfs_mount *, struct xfs_trans *, xfs_ino_t,
xfs_inode_t **, xfs_daddr_t, uint);
int xfs_iread_extents(struct xfs_trans *, xfs_inode_t *, int);
@@ -597,7 +579,6 @@
#define xfs_inobp_check(mp, bp)
#endif /* DEBUG */
-extern struct kmem_zone *xfs_icluster_zone;
extern struct kmem_zone *xfs_ifork_zone;
extern struct kmem_zone *xfs_inode_zone;
extern struct kmem_zone *xfs_ili_zone;
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index 034ca72..93b5db4 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -40,6 +40,7 @@
#include "xfs_btree.h"
#include "xfs_ialloc.h"
#include "xfs_rw.h"
+#include "xfs_error.h"
kmem_zone_t *xfs_ili_zone; /* inode log item zone */
@@ -296,9 +297,9 @@
*/
mp = ip->i_mount;
ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1 ||
- XFS_SB_VERSION_HASNLINK(&mp->m_sb));
+ xfs_sb_version_hasnlink(&mp->m_sb));
if (ip->i_d.di_version == XFS_DINODE_VERSION_1) {
- if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
+ if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
/*
* Convert it back.
*/
@@ -813,7 +814,12 @@
XFS_LOG_FORCE);
}
if (dopush) {
- xfs_bawrite(mp, bp);
+ int error;
+ error = xfs_bawrite(mp, bp);
+ if (error)
+ xfs_fs_cmn_err(CE_WARN, mp,
+ "xfs_inode_item_pushbuf: pushbuf error %d on iip %p, bp %p",
+ error, iip, bp);
} else {
xfs_buf_relse(bp);
}
diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h
index bfe92ea..4051307 100644
--- a/fs/xfs/xfs_inode_item.h
+++ b/fs/xfs/xfs_inode_item.h
@@ -168,6 +168,14 @@
return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT);
}
+static inline int xfs_inode_clean(xfs_inode_t *ip)
+{
+ return (!ip->i_itemp ||
+ !(ip->i_itemp->ili_format.ilf_fields & XFS_ILOG_ALL)) &&
+ !ip->i_update_core;
+}
+
+
#ifdef __KERNEL__
extern void xfs_inode_item_init(struct xfs_inode *, struct xfs_mount *);
diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index fde37f8..fb3cf11 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -802,8 +802,11 @@
*/
nimaps = 1;
end_fsb = XFS_B_TO_FSB(mp, ip->i_size);
- xfs_bmap_last_offset(NULL, ip, &last_block,
- XFS_DATA_FORK);
+ error = xfs_bmap_last_offset(NULL, ip, &last_block,
+ XFS_DATA_FORK);
+ if (error)
+ goto trans_cancel;
+
last_block = XFS_FILEOFF_MAX(last_block, end_fsb);
if ((map_start_fsb + count_fsb) > last_block) {
count_fsb = last_block - map_start_fsb;
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index 658aab6..eb85bde 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -45,7 +45,7 @@
xfs_ino_t ino)
{
return (ino == mp->m_sb.sb_rbmino || ino == mp->m_sb.sb_rsumino ||
- (XFS_SB_VERSION_HASQUOTA(&mp->m_sb) &&
+ (xfs_sb_version_hasquota(&mp->m_sb) &&
(ino == mp->m_sb.sb_uquotino || ino == mp->m_sb.sb_gquotino)));
}
@@ -129,7 +129,7 @@
return error;
}
-STATIC int
+STATIC void
xfs_bulkstat_one_dinode(
xfs_mount_t *mp, /* mount point for filesystem */
xfs_ino_t ino, /* inode number to get data for */
@@ -198,8 +198,6 @@
buf->bs_blocks = be64_to_cpu(dic->di_nblocks);
break;
}
-
- return 0;
}
STATIC int
@@ -614,7 +612,8 @@
xfs_buf_relse(bp);
error = xfs_itobp(mp, NULL, ip,
&dip, &bp, bno,
- XFS_IMAP_BULKSTAT);
+ XFS_IMAP_BULKSTAT,
+ XFS_BUF_LOCK);
if (!error)
clustidx = ip->i_boffset / mp->m_sb.sb_inodesize;
kmem_zone_free(xfs_inode_zone, ip);
diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c
index a75edca..afaee30 100644
--- a/fs/xfs/xfs_log.c
+++ b/fs/xfs/xfs_log.c
@@ -41,6 +41,7 @@
#include "xfs_inode.h"
#include "xfs_rw.h"
+kmem_zone_t *xfs_log_ticket_zone;
#define xlog_write_adv_cnt(ptr, len, off, bytes) \
{ (ptr) += (bytes); \
@@ -73,8 +74,6 @@
xlog_ticket_t *ticket,
int *continued_write,
int *logoffsetp);
-STATIC void xlog_state_put_ticket(xlog_t *log,
- xlog_ticket_t *tic);
STATIC int xlog_state_release_iclog(xlog_t *log,
xlog_in_core_t *iclog);
STATIC void xlog_state_switch_iclogs(xlog_t *log,
@@ -101,7 +100,6 @@
/* local ticket functions */
-STATIC void xlog_state_ticket_alloc(xlog_t *log);
STATIC xlog_ticket_t *xlog_ticket_get(xlog_t *log,
int unit_bytes,
int count,
@@ -330,7 +328,7 @@
*/
xlog_trace_loggrant(log, ticket, "xfs_log_done: (non-permanent)");
xlog_ungrant_log_space(log, ticket);
- xlog_state_put_ticket(log, ticket);
+ xlog_ticket_put(log, ticket);
} else {
xlog_trace_loggrant(log, ticket, "xfs_log_done: (permanent)");
xlog_regrant_reserve_log_space(log, ticket);
@@ -384,7 +382,27 @@
return xlog_state_sync_all(log, flags, log_flushed);
else
return xlog_state_sync(log, lsn, flags, log_flushed);
-} /* xfs_log_force */
+} /* _xfs_log_force */
+
+/*
+ * Wrapper for _xfs_log_force(), to be used when caller doesn't care
+ * about errors or whether the log was flushed or not. This is the normal
+ * interface to use when trying to unpin items or move the log forward.
+ */
+void
+xfs_log_force(
+ xfs_mount_t *mp,
+ xfs_lsn_t lsn,
+ uint flags)
+{
+ int error;
+ error = _xfs_log_force(mp, lsn, flags, NULL);
+ if (error) {
+ xfs_fs_cmn_err(CE_WARN, mp, "xfs_log_force: "
+ "error %d returned.", error);
+ }
+}
+
/*
* Attaches a new iclog I/O completion callback routine during
@@ -397,12 +415,10 @@
void *iclog_hndl, /* iclog to hang callback off */
xfs_log_callback_t *cb)
{
- xlog_t *log = mp->m_log;
xlog_in_core_t *iclog = (xlog_in_core_t *)iclog_hndl;
int abortflg;
- cb->cb_next = NULL;
- spin_lock(&log->l_icloglock);
+ spin_lock(&iclog->ic_callback_lock);
abortflg = (iclog->ic_state & XLOG_STATE_IOERROR);
if (!abortflg) {
ASSERT_ALWAYS((iclog->ic_state == XLOG_STATE_ACTIVE) ||
@@ -411,7 +427,7 @@
*(iclog->ic_callback_tail) = cb;
iclog->ic_callback_tail = &(cb->cb_next);
}
- spin_unlock(&log->l_icloglock);
+ spin_unlock(&iclog->ic_callback_lock);
return abortflg;
} /* xfs_log_notify */
@@ -471,6 +487,8 @@
/* may sleep if need to allocate more tickets */
internal_ticket = xlog_ticket_get(log, unit_bytes, cnt,
client, flags);
+ if (!internal_ticket)
+ return XFS_ERROR(ENOMEM);
internal_ticket->t_trans_type = t_type;
*ticket = internal_ticket;
xlog_trace_loggrant(log, internal_ticket,
@@ -636,7 +654,8 @@
if (mp->m_flags & XFS_MOUNT_RDONLY)
return 0;
- xfs_log_force(mp, 0, XFS_LOG_FORCE|XFS_LOG_SYNC);
+ error = _xfs_log_force(mp, 0, XFS_LOG_FORCE|XFS_LOG_SYNC, NULL);
+ ASSERT(error || !(XLOG_FORCED_SHUTDOWN(log)));
#ifdef DEBUG
first_iclog = iclog = log->l_iclog;
@@ -675,10 +694,10 @@
spin_lock(&log->l_icloglock);
iclog = log->l_iclog;
- iclog->ic_refcnt++;
+ atomic_inc(&iclog->ic_refcnt);
spin_unlock(&log->l_icloglock);
xlog_state_want_sync(log, iclog);
- (void) xlog_state_release_iclog(log, iclog);
+ error = xlog_state_release_iclog(log, iclog);
spin_lock(&log->l_icloglock);
if (!(iclog->ic_state == XLOG_STATE_ACTIVE ||
@@ -695,7 +714,7 @@
if (tic) {
xlog_trace_loggrant(log, tic, "unmount rec");
xlog_ungrant_log_space(log, tic);
- xlog_state_put_ticket(log, tic);
+ xlog_ticket_put(log, tic);
}
} else {
/*
@@ -713,11 +732,11 @@
*/
spin_lock(&log->l_icloglock);
iclog = log->l_iclog;
- iclog->ic_refcnt++;
+ atomic_inc(&iclog->ic_refcnt);
spin_unlock(&log->l_icloglock);
xlog_state_want_sync(log, iclog);
- (void) xlog_state_release_iclog(log, iclog);
+ error = xlog_state_release_iclog(log, iclog);
spin_lock(&log->l_icloglock);
@@ -732,7 +751,7 @@
}
}
- return 0;
+ return error;
} /* xfs_log_unmount_write */
/*
@@ -1090,7 +1109,7 @@
size >>= 1;
}
- if (XFS_SB_VERSION_HASLOGV2(&mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&mp->m_sb)) {
/* # headers = size / 32K
* one header holds cycles from 32K of data
*/
@@ -1186,13 +1205,13 @@
log->l_grant_reserve_cycle = 1;
log->l_grant_write_cycle = 1;
- if (XFS_SB_VERSION_HASSECTOR(&mp->m_sb)) {
+ if (xfs_sb_version_hassector(&mp->m_sb)) {
log->l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT;
ASSERT(log->l_sectbb_log <= mp->m_sectbb_log);
/* for larger sector sizes, must have v2 or external log */
ASSERT(log->l_sectbb_log == 0 ||
log->l_logBBstart == 0 ||
- XFS_SB_VERSION_HASLOGV2(&mp->m_sb));
+ xfs_sb_version_haslogv2(&mp->m_sb));
ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT);
}
log->l_sectbb_mask = (1 << log->l_sectbb_log) - 1;
@@ -1210,7 +1229,6 @@
spin_lock_init(&log->l_icloglock);
spin_lock_init(&log->l_grant_lock);
initnsema(&log->l_flushsema, 0, "ic-flush");
- xlog_state_ticket_alloc(log); /* wait until after icloglock inited */
/* log record size must be multiple of BBSIZE; see xlog_rec_header_t */
ASSERT((XFS_BUF_SIZE(bp) & BBMASK) == 0);
@@ -1240,23 +1258,24 @@
XFS_BUF_SET_FSPRIVATE2(bp, (unsigned long)1);
iclog->ic_bp = bp;
iclog->hic_data = bp->b_addr;
-
+#ifdef DEBUG
log->l_iclog_bak[i] = (xfs_caddr_t)&(iclog->ic_header);
-
+#endif
head = &iclog->ic_header;
memset(head, 0, sizeof(xlog_rec_header_t));
head->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
head->h_version = cpu_to_be32(
- XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? 2 : 1);
+ xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? 2 : 1);
head->h_size = cpu_to_be32(log->l_iclog_size);
/* new fields */
head->h_fmt = cpu_to_be32(XLOG_FMT);
memcpy(&head->h_fs_uuid, &mp->m_sb.sb_uuid, sizeof(uuid_t));
-
iclog->ic_size = XFS_BUF_SIZE(bp) - log->l_iclog_hsize;
iclog->ic_state = XLOG_STATE_ACTIVE;
iclog->ic_log = log;
+ atomic_set(&iclog->ic_refcnt, 0);
+ spin_lock_init(&iclog->ic_callback_lock);
iclog->ic_callback_tail = &(iclog->ic_callback);
iclog->ic_datap = (char *)iclog->hic_data + log->l_iclog_hsize;
@@ -1402,10 +1421,10 @@
int roundoff; /* roundoff to BB or stripe */
int split = 0; /* split write into two regions */
int error;
- int v2 = XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb);
+ int v2 = xfs_sb_version_haslogv2(&log->l_mp->m_sb);
XFS_STATS_INC(xs_log_writes);
- ASSERT(iclog->ic_refcnt == 0);
+ ASSERT(atomic_read(&iclog->ic_refcnt) == 0);
/* Add for LR header */
count_init = log->l_iclog_hsize + iclog->ic_offset;
@@ -1538,7 +1557,6 @@
xlog_dealloc_log(xlog_t *log)
{
xlog_in_core_t *iclog, *next_iclog;
- xlog_ticket_t *tic, *next_tic;
int i;
iclog = log->l_iclog;
@@ -1559,22 +1577,6 @@
spinlock_destroy(&log->l_icloglock);
spinlock_destroy(&log->l_grant_lock);
- /* XXXsup take a look at this again. */
- if ((log->l_ticket_cnt != log->l_ticket_tcnt) &&
- !XLOG_FORCED_SHUTDOWN(log)) {
- xfs_fs_cmn_err(CE_WARN, log->l_mp,
- "xlog_dealloc_log: (cnt: %d, total: %d)",
- log->l_ticket_cnt, log->l_ticket_tcnt);
- /* ASSERT(log->l_ticket_cnt == log->l_ticket_tcnt); */
-
- } else {
- tic = log->l_unmount_free;
- while (tic) {
- next_tic = tic->t_next;
- kmem_free(tic, PAGE_SIZE);
- tic = next_tic;
- }
- }
xfs_buf_free(log->l_xbuf);
#ifdef XFS_LOG_TRACE
if (log->l_trace != NULL) {
@@ -1987,7 +1989,7 @@
if (iclog->ic_state == XLOG_STATE_DIRTY) {
iclog->ic_state = XLOG_STATE_ACTIVE;
iclog->ic_offset = 0;
- iclog->ic_callback = NULL; /* don't need to free */
+ ASSERT(iclog->ic_callback == NULL);
/*
* If the number of ops in this iclog indicate it just
* contains the dummy transaction, we can
@@ -2190,37 +2192,40 @@
be64_to_cpu(iclog->ic_header.h_lsn);
spin_unlock(&log->l_grant_lock);
- /*
- * Keep processing entries in the callback list
- * until we come around and it is empty. We
- * need to atomically see that the list is
- * empty and change the state to DIRTY so that
- * we don't miss any more callbacks being added.
- */
- spin_lock(&log->l_icloglock);
} else {
+ spin_unlock(&log->l_icloglock);
ioerrors++;
}
- cb = iclog->ic_callback;
+ /*
+ * Keep processing entries in the callback list until
+ * we come around and it is empty. We need to
+ * atomically see that the list is empty and change the
+ * state to DIRTY so that we don't miss any more
+ * callbacks being added.
+ */
+ spin_lock(&iclog->ic_callback_lock);
+ cb = iclog->ic_callback;
while (cb) {
iclog->ic_callback_tail = &(iclog->ic_callback);
iclog->ic_callback = NULL;
- spin_unlock(&log->l_icloglock);
+ spin_unlock(&iclog->ic_callback_lock);
/* perform callbacks in the order given */
for (; cb; cb = cb_next) {
cb_next = cb->cb_next;
cb->cb_func(cb->cb_arg, aborted);
}
- spin_lock(&log->l_icloglock);
+ spin_lock(&iclog->ic_callback_lock);
cb = iclog->ic_callback;
}
loopdidcallbacks++;
funcdidcallbacks++;
+ spin_lock(&log->l_icloglock);
ASSERT(iclog->ic_callback == NULL);
+ spin_unlock(&iclog->ic_callback_lock);
if (!(iclog->ic_state & XLOG_STATE_IOERROR))
iclog->ic_state = XLOG_STATE_DIRTY;
@@ -2241,7 +2246,7 @@
repeats = 0;
xfs_fs_cmn_err(CE_WARN, log->l_mp,
"%s: possible infinite loop (%d iterations)",
- __FUNCTION__, flushcnt);
+ __func__, flushcnt);
}
} while (!ioerrors && loopdidcallbacks);
@@ -2309,7 +2314,7 @@
ASSERT(iclog->ic_state == XLOG_STATE_SYNCING ||
iclog->ic_state == XLOG_STATE_IOERROR);
- ASSERT(iclog->ic_refcnt == 0);
+ ASSERT(atomic_read(&iclog->ic_refcnt) == 0);
ASSERT(iclog->ic_bwritecnt == 1 || iclog->ic_bwritecnt == 2);
@@ -2391,7 +2396,7 @@
ASSERT(iclog->ic_state == XLOG_STATE_ACTIVE);
head = &iclog->ic_header;
- iclog->ic_refcnt++; /* prevents sync */
+ atomic_inc(&iclog->ic_refcnt); /* prevents sync */
log_offset = iclog->ic_offset;
/* On the 1st write to an iclog, figure out lsn. This works
@@ -2423,12 +2428,12 @@
xlog_state_switch_iclogs(log, iclog, iclog->ic_size);
/* If I'm the only one writing to this iclog, sync it to disk */
- if (iclog->ic_refcnt == 1) {
+ if (atomic_read(&iclog->ic_refcnt) == 1) {
spin_unlock(&log->l_icloglock);
if ((error = xlog_state_release_iclog(log, iclog)))
return error;
} else {
- iclog->ic_refcnt--;
+ atomic_dec(&iclog->ic_refcnt);
spin_unlock(&log->l_icloglock);
}
goto restart;
@@ -2792,18 +2797,6 @@
/*
- * Atomically put back used ticket.
- */
-STATIC void
-xlog_state_put_ticket(xlog_t *log,
- xlog_ticket_t *tic)
-{
- spin_lock(&log->l_icloglock);
- xlog_ticket_put(log, tic);
- spin_unlock(&log->l_icloglock);
-} /* xlog_state_put_ticket */
-
-/*
* Flush iclog to disk if this is the last reference to the given iclog and
* the WANT_SYNC bit is set.
*
@@ -2813,33 +2806,35 @@
*
*/
STATIC int
-xlog_state_release_iclog(xlog_t *log,
- xlog_in_core_t *iclog)
+xlog_state_release_iclog(
+ xlog_t *log,
+ xlog_in_core_t *iclog)
{
int sync = 0; /* do we sync? */
- xlog_assign_tail_lsn(log->l_mp);
+ if (iclog->ic_state & XLOG_STATE_IOERROR)
+ return XFS_ERROR(EIO);
- spin_lock(&log->l_icloglock);
+ ASSERT(atomic_read(&iclog->ic_refcnt) > 0);
+ if (!atomic_dec_and_lock(&iclog->ic_refcnt, &log->l_icloglock))
+ return 0;
if (iclog->ic_state & XLOG_STATE_IOERROR) {
spin_unlock(&log->l_icloglock);
return XFS_ERROR(EIO);
}
-
- ASSERT(iclog->ic_refcnt > 0);
ASSERT(iclog->ic_state == XLOG_STATE_ACTIVE ||
iclog->ic_state == XLOG_STATE_WANT_SYNC);
- if (--iclog->ic_refcnt == 0 &&
- iclog->ic_state == XLOG_STATE_WANT_SYNC) {
+ if (iclog->ic_state == XLOG_STATE_WANT_SYNC) {
+ /* update tail before writing to iclog */
+ xlog_assign_tail_lsn(log->l_mp);
sync++;
iclog->ic_state = XLOG_STATE_SYNCING;
iclog->ic_header.h_tail_lsn = cpu_to_be64(log->l_tail_lsn);
xlog_verify_tail_lsn(log, iclog, log->l_tail_lsn);
/* cycle incremented when incrementing curr_block */
}
-
spin_unlock(&log->l_icloglock);
/*
@@ -2849,11 +2844,9 @@
* this iclog has consistent data, so we ignore IOERROR
* flags after this point.
*/
- if (sync) {
+ if (sync)
return xlog_sync(log, iclog);
- }
return 0;
-
} /* xlog_state_release_iclog */
@@ -2881,7 +2874,7 @@
log->l_curr_block += BTOBB(eventual_size)+BTOBB(log->l_iclog_hsize);
/* Round up to next log-sunit */
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) &&
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb) &&
log->l_mp->m_sb.sb_logsunit > 1) {
__uint32_t sunit_bb = BTOBB(log->l_mp->m_sb.sb_logsunit);
log->l_curr_block = roundup(log->l_curr_block, sunit_bb);
@@ -2953,7 +2946,8 @@
* previous iclog and go to sleep.
*/
if (iclog->ic_state == XLOG_STATE_DIRTY ||
- (iclog->ic_refcnt == 0 && iclog->ic_offset == 0)) {
+ (atomic_read(&iclog->ic_refcnt) == 0
+ && iclog->ic_offset == 0)) {
iclog = iclog->ic_prev;
if (iclog->ic_state == XLOG_STATE_ACTIVE ||
iclog->ic_state == XLOG_STATE_DIRTY)
@@ -2961,14 +2955,14 @@
else
goto maybe_sleep;
} else {
- if (iclog->ic_refcnt == 0) {
+ if (atomic_read(&iclog->ic_refcnt) == 0) {
/* We are the only one with access to this
* iclog. Flush it out now. There should
* be a roundoff of zero to show that someone
* has already taken care of the roundoff from
* the previous sync.
*/
- iclog->ic_refcnt++;
+ atomic_inc(&iclog->ic_refcnt);
lsn = be64_to_cpu(iclog->ic_header.h_lsn);
xlog_state_switch_iclogs(log, iclog, 0);
spin_unlock(&log->l_icloglock);
@@ -3100,7 +3094,7 @@
already_slept = 1;
goto try_again;
} else {
- iclog->ic_refcnt++;
+ atomic_inc(&iclog->ic_refcnt);
xlog_state_switch_iclogs(log, iclog, 0);
spin_unlock(&log->l_icloglock);
if (xlog_state_release_iclog(log, iclog))
@@ -3172,92 +3166,19 @@
*/
/*
- * Algorithm doesn't take into account page size. ;-(
- */
-STATIC void
-xlog_state_ticket_alloc(xlog_t *log)
-{
- xlog_ticket_t *t_list;
- xlog_ticket_t *next;
- xfs_caddr_t buf;
- uint i = (PAGE_SIZE / sizeof(xlog_ticket_t)) - 2;
-
- /*
- * The kmem_zalloc may sleep, so we shouldn't be holding the
- * global lock. XXXmiken: may want to use zone allocator.
- */
- buf = (xfs_caddr_t) kmem_zalloc(PAGE_SIZE, KM_SLEEP);
-
- spin_lock(&log->l_icloglock);
-
- /* Attach 1st ticket to Q, so we can keep track of allocated memory */
- t_list = (xlog_ticket_t *)buf;
- t_list->t_next = log->l_unmount_free;
- log->l_unmount_free = t_list++;
- log->l_ticket_cnt++;
- log->l_ticket_tcnt++;
-
- /* Next ticket becomes first ticket attached to ticket free list */
- if (log->l_freelist != NULL) {
- ASSERT(log->l_tail != NULL);
- log->l_tail->t_next = t_list;
- } else {
- log->l_freelist = t_list;
- }
- log->l_ticket_cnt++;
- log->l_ticket_tcnt++;
-
- /* Cycle through rest of alloc'ed memory, building up free Q */
- for ( ; i > 0; i--) {
- next = t_list + 1;
- t_list->t_next = next;
- t_list = next;
- log->l_ticket_cnt++;
- log->l_ticket_tcnt++;
- }
- t_list->t_next = NULL;
- log->l_tail = t_list;
- spin_unlock(&log->l_icloglock);
-} /* xlog_state_ticket_alloc */
-
-
-/*
- * Put ticket into free list
- *
- * Assumption: log lock is held around this call.
+ * Free a used ticket.
*/
STATIC void
xlog_ticket_put(xlog_t *log,
xlog_ticket_t *ticket)
{
sv_destroy(&ticket->t_sema);
-
- /*
- * Don't think caching will make that much difference. It's
- * more important to make debug easier.
- */
-#if 0
- /* real code will want to use LIFO for caching */
- ticket->t_next = log->l_freelist;
- log->l_freelist = ticket;
- /* no need to clear fields */
-#else
- /* When we debug, it is easier if tickets are cycled */
- ticket->t_next = NULL;
- if (log->l_tail) {
- log->l_tail->t_next = ticket;
- } else {
- ASSERT(log->l_freelist == NULL);
- log->l_freelist = ticket;
- }
- log->l_tail = ticket;
-#endif /* DEBUG */
- log->l_ticket_cnt++;
+ kmem_zone_free(xfs_log_ticket_zone, ticket);
} /* xlog_ticket_put */
/*
- * Grab ticket off freelist or allocation some more
+ * Allocate and initialise a new log ticket.
*/
STATIC xlog_ticket_t *
xlog_ticket_get(xlog_t *log,
@@ -3269,21 +3190,9 @@
xlog_ticket_t *tic;
uint num_headers;
- alloc:
- if (log->l_freelist == NULL)
- xlog_state_ticket_alloc(log); /* potentially sleep */
-
- spin_lock(&log->l_icloglock);
- if (log->l_freelist == NULL) {
- spin_unlock(&log->l_icloglock);
- goto alloc;
- }
- tic = log->l_freelist;
- log->l_freelist = tic->t_next;
- if (log->l_freelist == NULL)
- log->l_tail = NULL;
- log->l_ticket_cnt--;
- spin_unlock(&log->l_icloglock);
+ tic = kmem_zone_zalloc(xfs_log_ticket_zone, KM_SLEEP|KM_MAYFAIL);
+ if (!tic)
+ return NULL;
/*
* Permanent reservations have up to 'cnt'-1 active log operations
@@ -3334,7 +3243,7 @@
unit_bytes += sizeof(xlog_op_header_t) * num_headers;
/* for roundoff padding for transaction data and one for commit record */
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) &&
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb) &&
log->l_mp->m_sb.sb_logsunit > 1) {
/* log su roundoff */
unit_bytes += 2*log->l_mp->m_sb.sb_logsunit;
@@ -3611,8 +3520,8 @@
* before we mark the filesystem SHUTDOWN and wake
* everybody up to tell the bad news.
*/
- spin_lock(&log->l_grant_lock);
spin_lock(&log->l_icloglock);
+ spin_lock(&log->l_grant_lock);
mp->m_flags |= XFS_MOUNT_FS_SHUTDOWN;
XFS_BUF_DONE(mp->m_sb_bp);
/*
diff --git a/fs/xfs/xfs_log.h b/fs/xfs/xfs_log.h
index 4cdac04..d1d678e 100644
--- a/fs/xfs/xfs_log.h
+++ b/fs/xfs/xfs_log.h
@@ -142,8 +142,9 @@
xfs_lsn_t lsn,
uint flags,
int *log_forced);
-#define xfs_log_force(mp, lsn, flags) \
- _xfs_log_force(mp, lsn, flags, NULL);
+void xfs_log_force(struct xfs_mount *mp,
+ xfs_lsn_t lsn,
+ uint flags);
int xfs_log_mount(struct xfs_mount *mp,
struct xfs_buftarg *log_target,
xfs_daddr_t start_block,
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index e008233..8952a39 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -49,10 +49,10 @@
#define XLOG_HEADER_SIZE 512
#define XLOG_REC_SHIFT(log) \
- BTOBB(1 << (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? \
+ BTOBB(1 << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \
XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT))
#define XLOG_TOTAL_REC_SHIFT(log) \
- BTOBB(XLOG_MAX_ICLOGS << (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? \
+ BTOBB(XLOG_MAX_ICLOGS << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \
XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT))
@@ -242,7 +242,7 @@
typedef struct xlog_ticket {
sv_t t_sema; /* sleep on this semaphore : 20 */
- struct xlog_ticket *t_next; /* :4|8 */
+ struct xlog_ticket *t_next; /* :4|8 */
struct xlog_ticket *t_prev; /* :4|8 */
xlog_tid_t t_tid; /* transaction identifier : 4 */
int t_curr_res; /* current reservation in bytes : 4 */
@@ -324,6 +324,19 @@
* - ic_offset is the current number of bytes written to in this iclog.
* - ic_refcnt is bumped when someone is writing to the log.
* - ic_state is the state of the iclog.
+ *
+ * Because of cacheline contention on large machines, we need to separate
+ * various resources onto different cachelines. To start with, make the
+ * structure cacheline aligned. The following fields can be contended on
+ * by independent processes:
+ *
+ * - ic_callback_*
+ * - ic_refcnt
+ * - fields protected by the global l_icloglock
+ *
+ * so we need to ensure that these fields are located in separate cachelines.
+ * We'll put all the read-only and l_icloglock fields in the first cacheline,
+ * and move everything else out to subsequent cachelines.
*/
typedef struct xlog_iclog_fields {
sv_t ic_forcesema;
@@ -332,17 +345,22 @@
struct xlog_in_core *ic_prev;
struct xfs_buf *ic_bp;
struct log *ic_log;
- xfs_log_callback_t *ic_callback;
- xfs_log_callback_t **ic_callback_tail;
-#ifdef XFS_LOG_TRACE
- struct ktrace *ic_trace;
-#endif
int ic_size;
int ic_offset;
- int ic_refcnt;
int ic_bwritecnt;
ushort_t ic_state;
char *ic_datap; /* pointer to iclog data */
+#ifdef XFS_LOG_TRACE
+ struct ktrace *ic_trace;
+#endif
+
+ /* Callback structures need their own cacheline */
+ spinlock_t ic_callback_lock ____cacheline_aligned_in_smp;
+ xfs_log_callback_t *ic_callback;
+ xfs_log_callback_t **ic_callback_tail;
+
+ /* reference counts need their own cacheline */
+ atomic_t ic_refcnt ____cacheline_aligned_in_smp;
} xlog_iclog_fields_t;
typedef union xlog_in_core2 {
@@ -366,6 +384,7 @@
#define ic_bp hic_fields.ic_bp
#define ic_log hic_fields.ic_log
#define ic_callback hic_fields.ic_callback
+#define ic_callback_lock hic_fields.ic_callback_lock
#define ic_callback_tail hic_fields.ic_callback_tail
#define ic_trace hic_fields.ic_trace
#define ic_size hic_fields.ic_size
@@ -383,55 +402,11 @@
* that round off problems won't occur when releasing partial reservations.
*/
typedef struct log {
- /* The following block of fields are changed while holding icloglock */
- sema_t l_flushsema; /* iclog flushing semaphore */
- int l_flushcnt; /* # of procs waiting on this
- * sema */
- int l_ticket_cnt; /* free ticket count */
- int l_ticket_tcnt; /* total ticket count */
- int l_covered_state;/* state of "covering disk
- * log entries" */
- xlog_ticket_t *l_freelist; /* free list of tickets */
- xlog_ticket_t *l_unmount_free;/* kmem_free these addresses */
- xlog_ticket_t *l_tail; /* free list of tickets */
- xlog_in_core_t *l_iclog; /* head log queue */
- spinlock_t l_icloglock; /* grab to change iclog state */
- xfs_lsn_t l_tail_lsn; /* lsn of 1st LR with unflushed
- * buffers */
- xfs_lsn_t l_last_sync_lsn;/* lsn of last LR on disk */
+ /* The following fields don't need locking */
struct xfs_mount *l_mp; /* mount point */
struct xfs_buf *l_xbuf; /* extra buffer for log
* wrapping */
struct xfs_buftarg *l_targ; /* buftarg of log */
- xfs_daddr_t l_logBBstart; /* start block of log */
- int l_logsize; /* size of log in bytes */
- int l_logBBsize; /* size of log in BB chunks */
- int l_curr_cycle; /* Cycle number of log writes */
- int l_prev_cycle; /* Cycle number before last
- * block increment */
- int l_curr_block; /* current logical log block */
- int l_prev_block; /* previous logical log block */
- int l_iclog_size; /* size of log in bytes */
- int l_iclog_size_log; /* log power size of log */
- int l_iclog_bufs; /* number of iclog buffers */
-
- /* The following field are used for debugging; need to hold icloglock */
- char *l_iclog_bak[XLOG_MAX_ICLOGS];
-
- /* The following block of fields are changed while holding grant_lock */
- spinlock_t l_grant_lock;
- xlog_ticket_t *l_reserve_headq;
- xlog_ticket_t *l_write_headq;
- int l_grant_reserve_cycle;
- int l_grant_reserve_bytes;
- int l_grant_write_cycle;
- int l_grant_write_bytes;
-
- /* The following fields don't need locking */
-#ifdef XFS_LOG_TRACE
- struct ktrace *l_trace;
- struct ktrace *l_grant_trace;
-#endif
uint l_flags;
uint l_quotaoffs_flag; /* XFS_DQ_*, for QUOTAOFFs */
struct xfs_buf_cancel **l_buf_cancel_table;
@@ -440,6 +415,50 @@
uint l_sectbb_log; /* log2 of sector size in BBs */
uint l_sectbb_mask; /* sector size (in BBs)
* alignment mask */
+ int l_iclog_size; /* size of log in bytes */
+ int l_iclog_size_log; /* log power size of log */
+ int l_iclog_bufs; /* number of iclog buffers */
+ xfs_daddr_t l_logBBstart; /* start block of log */
+ int l_logsize; /* size of log in bytes */
+ int l_logBBsize; /* size of log in BB chunks */
+
+ /* The following block of fields are changed while holding icloglock */
+ sema_t l_flushsema ____cacheline_aligned_in_smp;
+ /* iclog flushing semaphore */
+ int l_flushcnt; /* # of procs waiting on this
+ * sema */
+ int l_covered_state;/* state of "covering disk
+ * log entries" */
+ xlog_in_core_t *l_iclog; /* head log queue */
+ spinlock_t l_icloglock; /* grab to change iclog state */
+ xfs_lsn_t l_tail_lsn; /* lsn of 1st LR with unflushed
+ * buffers */
+ xfs_lsn_t l_last_sync_lsn;/* lsn of last LR on disk */
+ int l_curr_cycle; /* Cycle number of log writes */
+ int l_prev_cycle; /* Cycle number before last
+ * block increment */
+ int l_curr_block; /* current logical log block */
+ int l_prev_block; /* previous logical log block */
+
+ /* The following block of fields are changed while holding grant_lock */
+ spinlock_t l_grant_lock ____cacheline_aligned_in_smp;
+ xlog_ticket_t *l_reserve_headq;
+ xlog_ticket_t *l_write_headq;
+ int l_grant_reserve_cycle;
+ int l_grant_reserve_bytes;
+ int l_grant_write_cycle;
+ int l_grant_write_bytes;
+
+#ifdef XFS_LOG_TRACE
+ struct ktrace *l_trace;
+ struct ktrace *l_grant_trace;
+#endif
+
+ /* The following field are used for debugging; need to hold icloglock */
+#ifdef DEBUG
+ char *l_iclog_bak[XLOG_MAX_ICLOGS];
+#endif
+
} xlog_t;
#define XLOG_FORCED_SHUTDOWN(log) ((log)->l_flags & XLOG_IO_ERROR)
@@ -459,6 +478,8 @@
extern void xlog_put_bp(struct xfs_buf *);
extern int xlog_bread(xlog_t *, xfs_daddr_t, int, struct xfs_buf *);
+extern kmem_zone_t *xfs_log_ticket_zone;
+
/* iclog tracing */
#define XLOG_TRACE_GRAB_FLUSH 1
#define XLOG_TRACE_REL_FLUSH 2
diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c
index b82d5d4..e65ab4a 100644
--- a/fs/xfs/xfs_log_recover.c
+++ b/fs/xfs/xfs_log_recover.c
@@ -46,6 +46,7 @@
#include "xfs_trans_priv.h"
#include "xfs_quota.h"
#include "xfs_rw.h"
+#include "xfs_utils.h"
STATIC int xlog_find_zeroed(xlog_t *, xfs_daddr_t *);
STATIC int xlog_clear_stale_blocks(xlog_t *, xfs_lsn_t);
@@ -120,7 +121,8 @@
XFS_BUF_SET_TARGET(bp, log->l_mp->m_logdev_targp);
xfsbdstrat(log->l_mp, bp);
- if ((error = xfs_iowait(bp)))
+ error = xfs_iowait(bp);
+ if (error)
xfs_ioerror_alert("xlog_bread", log->l_mp,
bp, XFS_BUF_ADDR(bp));
return error;
@@ -191,7 +193,7 @@
{
int b;
- cmn_err(CE_DEBUG, "%s: SB : uuid = ", __FUNCTION__);
+ cmn_err(CE_DEBUG, "%s: SB : uuid = ", __func__);
for (b = 0; b < 16; b++)
cmn_err(CE_DEBUG, "%02x", ((uchar_t *)&mp->m_sb.sb_uuid)[b]);
cmn_err(CE_DEBUG, ", fmt = %d\n", XLOG_FMT);
@@ -478,7 +480,7 @@
* reset last_blk. Only when last_blk points in the middle of a log
* record do we update last_blk.
*/
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
uint h_size = be32_to_cpu(head->h_size);
xhdrs = h_size / XLOG_HEADER_CYCLE_SIZE;
@@ -888,7 +890,7 @@
* unmount record if there is one, so we pass the lsn of the
* unmount record rather than the block after it.
*/
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
int h_size = be32_to_cpu(rhead->h_size);
int h_version = be32_to_cpu(rhead->h_version);
@@ -1101,7 +1103,7 @@
recp->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
recp->h_cycle = cpu_to_be32(cycle);
recp->h_version = cpu_to_be32(
- XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? 2 : 1);
+ xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? 2 : 1);
recp->h_lsn = cpu_to_be64(xlog_assign_lsn(cycle, block));
recp->h_tail_lsn = cpu_to_be64(xlog_assign_lsn(tail_cycle, tail_block));
recp->h_fmt = cpu_to_be32(XLOG_FMT);
@@ -1160,10 +1162,14 @@
if (j == 0 && (start_block + endcount > ealign)) {
offset = XFS_BUF_PTR(bp);
balign = BBTOB(ealign - start_block);
- XFS_BUF_SET_PTR(bp, offset + balign, BBTOB(sectbb));
- if ((error = xlog_bread(log, ealign, sectbb, bp)))
+ error = XFS_BUF_SET_PTR(bp, offset + balign,
+ BBTOB(sectbb));
+ if (!error)
+ error = xlog_bread(log, ealign, sectbb, bp);
+ if (!error)
+ error = XFS_BUF_SET_PTR(bp, offset, bufblks);
+ if (error)
break;
- XFS_BUF_SET_PTR(bp, offset, bufblks);
}
offset = xlog_align(log, start_block, endcount, bp);
@@ -2280,7 +2286,9 @@
* invalidate the buffer when we write it out below.
*/
imap.im_blkno = 0;
- xfs_imap(log->l_mp, NULL, ino, &imap, 0);
+ error = xfs_imap(log->l_mp, NULL, ino, &imap, 0);
+ if (error)
+ goto error;
}
/*
@@ -2964,7 +2972,7 @@
* Process an extent free intent item that was recovered from
* the log. We need to free the extents that it describes.
*/
-STATIC void
+STATIC int
xlog_recover_process_efi(
xfs_mount_t *mp,
xfs_efi_log_item_t *efip)
@@ -2972,6 +2980,7 @@
xfs_efd_log_item_t *efdp;
xfs_trans_t *tp;
int i;
+ int error = 0;
xfs_extent_t *extp;
xfs_fsblock_t startblock_fsb;
@@ -2995,23 +3004,32 @@
* free the memory associated with it.
*/
xfs_efi_release(efip, efip->efi_format.efi_nextents);
- return;
+ return XFS_ERROR(EIO);
}
}
tp = xfs_trans_alloc(mp, 0);
- xfs_trans_reserve(tp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0, 0, 0);
+ error = xfs_trans_reserve(tp, 0, XFS_ITRUNCATE_LOG_RES(mp), 0, 0, 0);
+ if (error)
+ goto abort_error;
efdp = xfs_trans_get_efd(tp, efip, efip->efi_format.efi_nextents);
for (i = 0; i < efip->efi_format.efi_nextents; i++) {
extp = &(efip->efi_format.efi_extents[i]);
- xfs_free_extent(tp, extp->ext_start, extp->ext_len);
+ error = xfs_free_extent(tp, extp->ext_start, extp->ext_len);
+ if (error)
+ goto abort_error;
xfs_trans_log_efd_extent(tp, efdp, extp->ext_start,
extp->ext_len);
}
efip->efi_flags |= XFS_EFI_RECOVERED;
- xfs_trans_commit(tp, 0);
+ error = xfs_trans_commit(tp, 0);
+ return error;
+
+abort_error:
+ xfs_trans_cancel(tp, XFS_TRANS_ABORT);
+ return error;
}
/*
@@ -3059,7 +3077,7 @@
* everything already in the AIL, we stop processing as soon as
* we see something other than an EFI in the AIL.
*/
-STATIC void
+STATIC int
xlog_recover_process_efis(
xlog_t *log)
{
@@ -3067,6 +3085,7 @@
xfs_efi_log_item_t *efip;
int gen;
xfs_mount_t *mp;
+ int error = 0;
mp = log->l_mp;
spin_lock(&mp->m_ail_lock);
@@ -3091,11 +3110,14 @@
}
spin_unlock(&mp->m_ail_lock);
- xlog_recover_process_efi(mp, efip);
+ error = xlog_recover_process_efi(mp, efip);
+ if (error)
+ return error;
spin_lock(&mp->m_ail_lock);
lip = xfs_trans_next_ail(mp, lip, &gen, NULL);
}
spin_unlock(&mp->m_ail_lock);
+ return error;
}
/*
@@ -3115,21 +3137,18 @@
int error;
tp = xfs_trans_alloc(mp, XFS_TRANS_CLEAR_AGI_BUCKET);
- xfs_trans_reserve(tp, 0, XFS_CLEAR_AGI_BUCKET_LOG_RES(mp), 0, 0, 0);
-
- error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp,
+ error = xfs_trans_reserve(tp, 0, XFS_CLEAR_AGI_BUCKET_LOG_RES(mp), 0, 0, 0);
+ if (!error)
+ error = xfs_trans_read_buf(mp, tp, mp->m_ddev_targp,
XFS_AG_DADDR(mp, agno, XFS_AGI_DADDR(mp)),
XFS_FSS_TO_BB(mp, 1), 0, &agibp);
- if (error) {
- xfs_trans_cancel(tp, XFS_TRANS_ABORT);
- return;
- }
+ if (error)
+ goto out_abort;
+ error = EINVAL;
agi = XFS_BUF_TO_AGI(agibp);
- if (be32_to_cpu(agi->agi_magicnum) != XFS_AGI_MAGIC) {
- xfs_trans_cancel(tp, XFS_TRANS_ABORT);
- return;
- }
+ if (be32_to_cpu(agi->agi_magicnum) != XFS_AGI_MAGIC)
+ goto out_abort;
agi->agi_unlinked[bucket] = cpu_to_be32(NULLAGINO);
offset = offsetof(xfs_agi_t, agi_unlinked) +
@@ -3137,7 +3156,17 @@
xfs_trans_log_buf(tp, agibp, offset,
(offset + sizeof(xfs_agino_t) - 1));
- (void) xfs_trans_commit(tp, 0);
+ error = xfs_trans_commit(tp, 0);
+ if (error)
+ goto out_error;
+ return;
+
+out_abort:
+ xfs_trans_cancel(tp, XFS_TRANS_ABORT);
+out_error:
+ xfs_fs_cmn_err(CE_WARN, mp, "xlog_recover_clear_agi_bucket: "
+ "failed to clear agi %d. Continuing.", agno);
+ return;
}
/*
@@ -3214,7 +3243,8 @@
* next inode in the bucket.
*/
error = xfs_itobp(mp, NULL, ip, &dip,
- &ibp, 0, 0);
+ &ibp, 0, 0,
+ XFS_BUF_LOCK);
ASSERT(error || (dip != NULL));
}
@@ -3247,7 +3277,7 @@
if (ip->i_d.di_mode == 0)
xfs_iput_new(ip, 0);
else
- VN_RELE(XFS_ITOV(ip));
+ IRELE(ip);
} else {
/*
* We can't read in the inode
@@ -3348,7 +3378,7 @@
dp += BBSIZE;
}
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
xhdr = (xlog_in_core_2_t *)&iclog->ic_header;
for ( ; i < BTOBB(size); i++) {
j = i / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
@@ -3388,7 +3418,7 @@
be32_to_cpu(rhead->h_chksum), chksum);
cmn_err(CE_DEBUG,
"XFS: Disregard message if filesystem was created with non-DEBUG kernel");
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
cmn_err(CE_DEBUG,
"XFS: LogR this is a LogV2 filesystem\n");
}
@@ -3415,7 +3445,7 @@
dp += BBSIZE;
}
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
xhdr = (xlog_in_core_2_t *)rhead;
for ( ; i < BTOBB(be32_to_cpu(rhead->h_len)); i++) {
j = i / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
@@ -3445,7 +3475,7 @@
(!rhead->h_version ||
(be32_to_cpu(rhead->h_version) & (~XLOG_VERSION_OKBITS))))) {
xlog_warn("XFS: %s: unrecognised log version (%d).",
- __FUNCTION__, be32_to_cpu(rhead->h_version));
+ __func__, be32_to_cpu(rhead->h_version));
return XFS_ERROR(EIO);
}
@@ -3494,7 +3524,7 @@
* Read the header of the tail block and get the iclog buffer size from
* h_size. Use this to tell how many sectors make up the log header.
*/
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
/*
* When using variable length iclogs, read first sector of
* iclog header and extract the header size from it. Get a
@@ -3604,15 +3634,19 @@
* _first_, then the log start (LR header end)
* - order is important.
*/
+ wrapped_hblks = hblks - split_hblks;
bufaddr = XFS_BUF_PTR(hbp);
- XFS_BUF_SET_PTR(hbp,
+ error = XFS_BUF_SET_PTR(hbp,
bufaddr + BBTOB(split_hblks),
BBTOB(hblks - split_hblks));
- wrapped_hblks = hblks - split_hblks;
- error = xlog_bread(log, 0, wrapped_hblks, hbp);
+ if (!error)
+ error = xlog_bread(log, 0,
+ wrapped_hblks, hbp);
+ if (!error)
+ error = XFS_BUF_SET_PTR(hbp, bufaddr,
+ BBTOB(hblks));
if (error)
goto bread_err2;
- XFS_BUF_SET_PTR(hbp, bufaddr, BBTOB(hblks));
if (!offset)
offset = xlog_align(log, 0,
wrapped_hblks, hbp);
@@ -3664,13 +3698,18 @@
* - order is important.
*/
bufaddr = XFS_BUF_PTR(dbp);
- XFS_BUF_SET_PTR(dbp,
+ error = XFS_BUF_SET_PTR(dbp,
bufaddr + BBTOB(split_bblks),
BBTOB(bblks - split_bblks));
- if ((error = xlog_bread(log, wrapped_hblks,
- bblks - split_bblks, dbp)))
+ if (!error)
+ error = xlog_bread(log, wrapped_hblks,
+ bblks - split_bblks,
+ dbp);
+ if (!error)
+ error = XFS_BUF_SET_PTR(dbp, bufaddr,
+ h_size);
+ if (error)
goto bread_err2;
- XFS_BUF_SET_PTR(dbp, bufaddr, h_size);
if (!offset)
offset = xlog_align(log, wrapped_hblks,
bblks - split_bblks, dbp);
@@ -3826,7 +3865,8 @@
XFS_BUF_READ(bp);
XFS_BUF_UNASYNC(bp);
xfsbdstrat(log->l_mp, bp);
- if ((error = xfs_iowait(bp))) {
+ error = xfs_iowait(bp);
+ if (error) {
xfs_ioerror_alert("xlog_do_recover",
log->l_mp, bp, XFS_BUF_ADDR(bp));
ASSERT(0);
@@ -3838,7 +3878,7 @@
sbp = &log->l_mp->m_sb;
xfs_sb_from_disk(sbp, XFS_BUF_TO_SBP(bp));
ASSERT(sbp->sb_magicnum == XFS_SB_MAGIC);
- ASSERT(XFS_SB_GOOD_VERSION(sbp));
+ ASSERT(xfs_sb_good_version(sbp));
xfs_buf_relse(bp);
/* We've re-read the superblock so re-initialize per-cpu counters */
@@ -3917,7 +3957,14 @@
* rather than accepting new requests.
*/
if (log->l_flags & XLOG_RECOVERY_NEEDED) {
- xlog_recover_process_efis(log);
+ int error;
+ error = xlog_recover_process_efis(log);
+ if (error) {
+ cmn_err(CE_ALERT,
+ "Failed to recover EFIs on filesystem: %s",
+ log->l_mp->m_fsname);
+ return error;
+ }
/*
* Sync the log to get all the EFIs out of the AIL.
* This isn't absolutely necessary, but it helps in
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 6409b37..2fec452 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -43,8 +43,9 @@
#include "xfs_rw.h"
#include "xfs_quota.h"
#include "xfs_fsops.h"
+#include "xfs_utils.h"
-STATIC void xfs_mount_log_sbunit(xfs_mount_t *, __int64_t);
+STATIC int xfs_mount_log_sb(xfs_mount_t *, __int64_t);
STATIC int xfs_uuid_mount(xfs_mount_t *);
STATIC void xfs_uuid_unmount(xfs_mount_t *mp);
STATIC void xfs_unmountfs_wait(xfs_mount_t *);
@@ -57,7 +58,7 @@
STATIC void xfs_icsb_sync_counters(xfs_mount_t *);
STATIC int xfs_icsb_modify_counters(xfs_mount_t *, xfs_sb_field_t,
int64_t, int);
-STATIC int xfs_icsb_disable_counter(xfs_mount_t *, xfs_sb_field_t);
+STATIC void xfs_icsb_disable_counter(xfs_mount_t *, xfs_sb_field_t);
#else
@@ -119,6 +120,7 @@
{ offsetof(xfs_sb_t, sb_logsectsize),0 },
{ offsetof(xfs_sb_t, sb_logsunit), 0 },
{ offsetof(xfs_sb_t, sb_features2), 0 },
+ { offsetof(xfs_sb_t, sb_bad_features2), 0 },
{ sizeof(xfs_sb_t), 0 }
};
@@ -225,7 +227,7 @@
return XFS_ERROR(EWRONGFS);
}
- if (!XFS_SB_GOOD_VERSION(sbp)) {
+ if (!xfs_sb_good_version(sbp)) {
xfs_fs_mount_cmn_err(flags, "bad version");
return XFS_ERROR(EWRONGFS);
}
@@ -300,7 +302,7 @@
/*
* Version 1 directory format has never worked on Linux.
*/
- if (unlikely(!XFS_SB_VERSION_HASDIRV2(sbp))) {
+ if (unlikely(!xfs_sb_version_hasdirv2(sbp))) {
xfs_fs_mount_cmn_err(flags,
"file system using version 1 directory format");
return XFS_ERROR(ENOSYS);
@@ -449,6 +451,7 @@
to->sb_logsectsize = be16_to_cpu(from->sb_logsectsize);
to->sb_logsunit = be32_to_cpu(from->sb_logsunit);
to->sb_features2 = be32_to_cpu(from->sb_features2);
+ to->sb_bad_features2 = be32_to_cpu(from->sb_bad_features2);
}
/*
@@ -781,7 +784,7 @@
* Update superblock with new values
* and log changes
*/
- if (XFS_SB_VERSION_HASDALIGN(sbp)) {
+ if (xfs_sb_version_hasdalign(sbp)) {
if (sbp->sb_unit != mp->m_dalign) {
sbp->sb_unit = mp->m_dalign;
*update_flags |= XFS_SB_UNIT;
@@ -792,7 +795,7 @@
}
}
} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
- XFS_SB_VERSION_HASDALIGN(&mp->m_sb)) {
+ xfs_sb_version_hasdalign(&mp->m_sb)) {
mp->m_dalign = sbp->sb_unit;
mp->m_swidth = sbp->sb_width;
}
@@ -869,7 +872,7 @@
STATIC void
xfs_set_inoalignment(xfs_mount_t *mp)
{
- if (XFS_SB_VERSION_HASALIGN(&mp->m_sb) &&
+ if (xfs_sb_version_hasalign(&mp->m_sb) &&
mp->m_sb.sb_inoalignmt >=
XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size))
mp->m_inoalign_mask = mp->m_sb.sb_inoalignmt - 1;
@@ -954,7 +957,6 @@
{
xfs_sb_t *sbp = &(mp->m_sb);
xfs_inode_t *rip;
- bhv_vnode_t *rvp = NULL;
__uint64_t resblks;
__int64_t update_flags = 0LL;
uint quotamount, quotaflags;
@@ -962,14 +964,41 @@
int uuid_mounted = 0;
int error = 0;
- if (mp->m_sb_bp == NULL) {
- error = xfs_readsb(mp, mfsi_flags);
- if (error)
- return error;
- }
xfs_mount_common(mp, sbp);
/*
+ * Check for a mismatched features2 values. Older kernels
+ * read & wrote into the wrong sb offset for sb_features2
+ * on some platforms due to xfs_sb_t not being 64bit size aligned
+ * when sb_features2 was added, which made older superblock
+ * reading/writing routines swap it as a 64-bit value.
+ *
+ * For backwards compatibility, we make both slots equal.
+ *
+ * If we detect a mismatched field, we OR the set bits into the
+ * existing features2 field in case it has already been modified; we
+ * don't want to lose any features. We then update the bad location
+ * with the ORed value so that older kernels will see any features2
+ * flags, and mark the two fields as needing updates once the
+ * transaction subsystem is online.
+ */
+ if (xfs_sb_has_mismatched_features2(sbp)) {
+ cmn_err(CE_WARN,
+ "XFS: correcting sb_features alignment problem");
+ sbp->sb_features2 |= sbp->sb_bad_features2;
+ sbp->sb_bad_features2 = sbp->sb_features2;
+ update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
+
+ /*
+ * Re-check for ATTR2 in case it was found in bad_features2
+ * slot.
+ */
+ if (xfs_sb_version_hasattr2(&mp->m_sb))
+ mp->m_flags |= XFS_MOUNT_ATTR2;
+
+ }
+
+ /*
* Check if sb_agblocks is aligned at stripe boundary
* If sb_agblocks is NOT aligned turn off m_dalign since
* allocator alignment is within an ag, therefore ag has
@@ -1129,7 +1158,6 @@
}
ASSERT(rip != NULL);
- rvp = XFS_ITOV(rip);
if (unlikely((rip->i_d.di_mode & S_IFMT) != S_IFDIR)) {
cmn_err(CE_WARN, "XFS: corrupted root inode");
@@ -1159,11 +1187,15 @@
}
/*
- * If fs is not mounted readonly, then update the superblock
- * unit and width changes.
+ * If fs is not mounted readonly, then update the superblock changes.
*/
- if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY))
- xfs_mount_log_sbunit(mp, update_flags);
+ if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+ error = xfs_mount_log_sb(mp, update_flags);
+ if (error) {
+ cmn_err(CE_WARN, "XFS: failed to write sb changes");
+ goto error4;
+ }
+ }
/*
* Initialise the XFS quota management subsystem for this mount
@@ -1200,12 +1232,15 @@
*
* We default to 5% or 1024 fsbs of space reserved, whichever is smaller.
* This may drive us straight to ENOSPC on mount, but that implies
- * we were already there on the last unmount.
+ * we were already there on the last unmount. Warn if this occurs.
*/
resblks = mp->m_sb.sb_dblocks;
do_div(resblks, 20);
resblks = min_t(__uint64_t, resblks, 1024);
- xfs_reserve_blocks(mp, &resblks, NULL);
+ error = xfs_reserve_blocks(mp, &resblks, NULL);
+ if (error)
+ cmn_err(CE_WARN, "XFS: Unable to allocate reserve blocks. "
+ "Continuing without a reserve pool.");
return 0;
@@ -1213,7 +1248,7 @@
/*
* Free up the root inode.
*/
- VN_RELE(rvp);
+ IRELE(rip);
error3:
xfs_log_unmount_dealloc(mp);
error2:
@@ -1241,6 +1276,7 @@
xfs_unmountfs(xfs_mount_t *mp, struct cred *cr)
{
__uint64_t resblks;
+ int error = 0;
/*
* We can potentially deadlock here if we have an inode cluster
@@ -1284,9 +1320,15 @@
* value does not matter....
*/
resblks = 0;
- xfs_reserve_blocks(mp, &resblks, NULL);
+ error = xfs_reserve_blocks(mp, &resblks, NULL);
+ if (error)
+ cmn_err(CE_WARN, "XFS: Unable to free reserved block pool. "
+ "Freespace may not be correct on next mount.");
- xfs_log_sbcount(mp, 1);
+ error = xfs_log_sbcount(mp, 1);
+ if (error)
+ cmn_err(CE_WARN, "XFS: Unable to update superblock counters. "
+ "Freespace may not be correct on next mount.");
xfs_unmountfs_writesb(mp);
xfs_unmountfs_wait(mp); /* wait for async bufs */
xfs_log_unmount(mp); /* Done! No more fs ops. */
@@ -1378,9 +1420,8 @@
xfs_mod_sb(tp, XFS_SB_IFREE | XFS_SB_ICOUNT | XFS_SB_FDBLOCKS);
if (sync)
xfs_trans_set_sync(tp);
- xfs_trans_commit(tp, 0);
-
- return 0;
+ error = xfs_trans_commit(tp, 0);
+ return error;
}
STATIC void
@@ -1429,7 +1470,6 @@
XFS_BUF_UNASYNC(sbp);
ASSERT(XFS_BUF_TARGET(sbp) == mp->m_ddev_targp);
xfsbdstrat(mp, sbp);
- /* Nevermind errors we might get here. */
error = xfs_iowait(sbp);
if (error)
xfs_ioerror_alert("xfs_unmountfs_writesb",
@@ -1875,25 +1915,30 @@
/*
* Used to log changes to the superblock unit and width fields which could
- * be altered by the mount options. Only the first superblock is updated.
+ * be altered by the mount options, as well as any potential sb_features2
+ * fixup. Only the first superblock is updated.
*/
-STATIC void
-xfs_mount_log_sbunit(
+STATIC int
+xfs_mount_log_sb(
xfs_mount_t *mp,
__int64_t fields)
{
xfs_trans_t *tp;
+ int error;
- ASSERT(fields & (XFS_SB_UNIT|XFS_SB_WIDTH|XFS_SB_UUID));
+ ASSERT(fields & (XFS_SB_UNIT | XFS_SB_WIDTH | XFS_SB_UUID |
+ XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2));
tp = xfs_trans_alloc(mp, XFS_TRANS_SB_UNIT);
- if (xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0,
- XFS_DEFAULT_LOG_COUNT)) {
+ error = xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0,
+ XFS_DEFAULT_LOG_COUNT);
+ if (error) {
xfs_trans_cancel(tp, 0);
- return;
+ return error;
}
xfs_mod_sb(tp, fields);
- xfs_trans_commit(tp, 0);
+ error = xfs_trans_commit(tp, 0);
+ return error;
}
@@ -2154,7 +2199,7 @@
return test_bit(field, &mp->m_icsb_counters);
}
-STATIC int
+STATIC void
xfs_icsb_disable_counter(
xfs_mount_t *mp,
xfs_sb_field_t field)
@@ -2172,7 +2217,7 @@
* the m_icsb_mutex.
*/
if (xfs_icsb_counter_disabled(mp, field))
- return 0;
+ return;
xfs_icsb_lock_all_counters(mp);
if (!test_and_set_bit(field, &mp->m_icsb_counters)) {
@@ -2195,8 +2240,6 @@
}
xfs_icsb_unlock_all_counters(mp);
-
- return 0;
}
STATIC void
diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h
index 1d8a472..1ed5751 100644
--- a/fs/xfs/xfs_mount.h
+++ b/fs/xfs/xfs_mount.h
@@ -66,17 +66,17 @@
* Prototypes and functions for the Data Migration subsystem.
*/
-typedef int (*xfs_send_data_t)(int, bhv_vnode_t *,
- xfs_off_t, size_t, int, bhv_vrwlock_t *);
+typedef int (*xfs_send_data_t)(int, struct xfs_inode *,
+ xfs_off_t, size_t, int, int *);
typedef int (*xfs_send_mmap_t)(struct vm_area_struct *, uint);
-typedef int (*xfs_send_destroy_t)(bhv_vnode_t *, dm_right_t);
+typedef int (*xfs_send_destroy_t)(struct xfs_inode *, dm_right_t);
typedef int (*xfs_send_namesp_t)(dm_eventtype_t, struct xfs_mount *,
- bhv_vnode_t *,
- dm_right_t, bhv_vnode_t *, dm_right_t,
- char *, char *, mode_t, int, int);
+ struct xfs_inode *, dm_right_t,
+ struct xfs_inode *, dm_right_t,
+ const char *, const char *, mode_t, int, int);
typedef int (*xfs_send_mount_t)(struct xfs_mount *, dm_right_t,
char *, char *);
-typedef void (*xfs_send_unmount_t)(struct xfs_mount *, bhv_vnode_t *,
+typedef void (*xfs_send_unmount_t)(struct xfs_mount *, struct xfs_inode *,
dm_right_t, mode_t, int, int);
typedef struct xfs_dmops {
@@ -88,20 +88,20 @@
xfs_send_unmount_t xfs_send_unmount;
} xfs_dmops_t;
-#define XFS_SEND_DATA(mp, ev,vp,off,len,fl,lock) \
- (*(mp)->m_dm_ops->xfs_send_data)(ev,vp,off,len,fl,lock)
+#define XFS_SEND_DATA(mp, ev,ip,off,len,fl,lock) \
+ (*(mp)->m_dm_ops->xfs_send_data)(ev,ip,off,len,fl,lock)
#define XFS_SEND_MMAP(mp, vma,fl) \
(*(mp)->m_dm_ops->xfs_send_mmap)(vma,fl)
-#define XFS_SEND_DESTROY(mp, vp,right) \
- (*(mp)->m_dm_ops->xfs_send_destroy)(vp,right)
+#define XFS_SEND_DESTROY(mp, ip,right) \
+ (*(mp)->m_dm_ops->xfs_send_destroy)(ip,right)
#define XFS_SEND_NAMESP(mp, ev,b1,r1,b2,r2,n1,n2,mode,rval,fl) \
(*(mp)->m_dm_ops->xfs_send_namesp)(ev,NULL,b1,r1,b2,r2,n1,n2,mode,rval,fl)
#define XFS_SEND_PREUNMOUNT(mp,b1,r1,b2,r2,n1,n2,mode,rval,fl) \
(*(mp)->m_dm_ops->xfs_send_namesp)(DM_EVENT_PREUNMOUNT,mp,b1,r1,b2,r2,n1,n2,mode,rval,fl)
#define XFS_SEND_MOUNT(mp,right,path,name) \
(*(mp)->m_dm_ops->xfs_send_mount)(mp,right,path,name)
-#define XFS_SEND_UNMOUNT(mp, vp,right,mode,rval,fl) \
- (*(mp)->m_dm_ops->xfs_send_unmount)(mp,vp,right,mode,rval,fl)
+#define XFS_SEND_UNMOUNT(mp, ip,right,mode,rval,fl) \
+ (*(mp)->m_dm_ops->xfs_send_unmount)(mp,ip,right,mode,rval,fl)
/*
@@ -220,7 +220,7 @@
#endif
typedef struct xfs_ail {
- xfs_ail_entry_t xa_ail;
+ struct list_head xa_ail;
uint xa_gen;
struct task_struct *xa_task;
xfs_lsn_t xa_target;
@@ -401,7 +401,7 @@
/*
* Allow large block sizes to be reported to userspace programs if the
- * "largeio" mount option is used.
+ * "largeio" mount option is used.
*
* If compatibility mode is specified, simply return the basic unit of caching
* so that we don't get inefficient read/modify/write I/O from user apps.
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index 7eb157a..ee37189 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -36,7 +36,6 @@
#include "xfs_bmap.h"
#include "xfs_error.h"
#include "xfs_quota.h"
-#include "xfs_refcache.h"
#include "xfs_utils.h"
#include "xfs_trans_space.h"
#include "xfs_vnodeops.h"
@@ -84,25 +83,23 @@
*/
STATIC int
xfs_lock_for_rename(
- xfs_inode_t *dp1, /* old (source) directory inode */
- xfs_inode_t *dp2, /* new (target) directory inode */
- bhv_vname_t *vname1,/* old entry name */
- bhv_vname_t *vname2,/* new entry name */
- xfs_inode_t **ipp1, /* inode of old entry */
- xfs_inode_t **ipp2, /* inode of new entry, if it
+ xfs_inode_t *dp1, /* in: old (source) directory inode */
+ xfs_inode_t *dp2, /* in: new (target) directory inode */
+ xfs_inode_t *ip1, /* in: inode of old entry */
+ struct xfs_name *name2, /* in: new entry name */
+ xfs_inode_t **ipp2, /* out: inode of new entry, if it
already exists, NULL otherwise. */
- xfs_inode_t **i_tab,/* array of inode returned, sorted */
- int *num_inodes) /* number of inodes in array */
+ xfs_inode_t **i_tab,/* out: array of inode returned, sorted */
+ int *num_inodes) /* out: number of inodes in array */
{
- xfs_inode_t *ip1, *ip2, *temp;
+ xfs_inode_t *ip2 = NULL;
+ xfs_inode_t *temp;
xfs_ino_t inum1, inum2;
int error;
int i, j;
uint lock_mode;
int diff_dirs = (dp1 != dp2);
- ip2 = NULL;
-
/*
* First, find out the current inums of the entries so that we
* can determine the initial locking order. We'll have to
@@ -110,27 +107,20 @@
* to see if we still have the right inodes, directories, etc.
*/
lock_mode = xfs_ilock_map_shared(dp1);
- error = xfs_get_dir_entry(vname1, &ip1);
- if (error) {
- xfs_iunlock_map_shared(dp1, lock_mode);
- return error;
- }
+ IHOLD(ip1);
+ xfs_itrace_ref(ip1);
inum1 = ip1->i_ino;
- ASSERT(ip1);
- xfs_itrace_ref(ip1);
-
/*
* Unlock dp1 and lock dp2 if they are different.
*/
-
if (diff_dirs) {
xfs_iunlock_map_shared(dp1, lock_mode);
lock_mode = xfs_ilock_map_shared(dp2);
}
- error = xfs_dir_lookup_int(dp2, lock_mode, vname2, &inum2, &ip2);
+ error = xfs_dir_lookup_int(dp2, lock_mode, name2, &inum2, &ip2);
if (error == ENOENT) { /* target does not need to exist. */
inum2 = 0;
} else if (error) {
@@ -162,6 +152,7 @@
*num_inodes = 4;
i_tab[3] = ip2;
}
+ *ipp2 = i_tab[3];
/*
* Sort the elements via bubble sort. (Remember, there are at
@@ -199,21 +190,6 @@
xfs_lock_inodes(i_tab, *num_inodes, 0, XFS_ILOCK_SHARED);
}
- /*
- * Set the return value. Null out any unused entries in i_tab.
- */
- *ipp1 = *ipp2 = NULL;
- for (i=0; i < *num_inodes; i++) {
- if (i_tab[i]->i_ino == inum1) {
- *ipp1 = i_tab[i];
- }
- if (i_tab[i]->i_ino == inum2) {
- *ipp2 = i_tab[i];
- }
- }
- for (;i < 4; i++) {
- i_tab[i] = NULL;
- }
return 0;
}
@@ -223,13 +199,13 @@
int
xfs_rename(
xfs_inode_t *src_dp,
- bhv_vname_t *src_vname,
- bhv_vnode_t *target_dir_vp,
- bhv_vname_t *target_vname)
+ struct xfs_name *src_name,
+ xfs_inode_t *src_ip,
+ xfs_inode_t *target_dp,
+ struct xfs_name *target_name)
{
- bhv_vnode_t *src_dir_vp = XFS_ITOV(src_dp);
xfs_trans_t *tp;
- xfs_inode_t *target_dp, *src_ip, *target_ip;
+ xfs_inode_t *target_ip;
xfs_mount_t *mp = src_dp->i_mount;
int new_parent; /* moving to a new dir */
int src_is_directory; /* src_name is a directory */
@@ -243,29 +219,16 @@
int spaceres;
int target_link_zero = 0;
int num_inodes;
- char *src_name = VNAME(src_vname);
- char *target_name = VNAME(target_vname);
- int src_namelen = VNAMELEN(src_vname);
- int target_namelen = VNAMELEN(target_vname);
xfs_itrace_entry(src_dp);
- xfs_itrace_entry(xfs_vtoi(target_dir_vp));
-
- /*
- * Find the XFS behavior descriptor for the target directory
- * vnode since it was not handed to us.
- */
- target_dp = xfs_vtoi(target_dir_vp);
- if (target_dp == NULL) {
- return XFS_ERROR(EXDEV);
- }
+ xfs_itrace_entry(target_dp);
if (DM_EVENT_ENABLED(src_dp, DM_EVENT_RENAME) ||
DM_EVENT_ENABLED(target_dp, DM_EVENT_RENAME)) {
error = XFS_SEND_NAMESP(mp, DM_EVENT_RENAME,
- src_dir_vp, DM_RIGHT_NULL,
- target_dir_vp, DM_RIGHT_NULL,
- src_name, target_name,
+ src_dp, DM_RIGHT_NULL,
+ target_dp, DM_RIGHT_NULL,
+ src_name->name, target_name->name,
0, 0, 0);
if (error) {
return error;
@@ -282,10 +245,8 @@
* does not exist in the source directory.
*/
tp = NULL;
- error = xfs_lock_for_rename(src_dp, target_dp, src_vname,
- target_vname, &src_ip, &target_ip, inodes,
- &num_inodes);
-
+ error = xfs_lock_for_rename(src_dp, target_dp, src_ip, target_name,
+ &target_ip, inodes, &num_inodes);
if (error) {
/*
* We have nothing locked, no inode references, and
@@ -331,7 +292,7 @@
XFS_BMAP_INIT(&free_list, &first_block);
tp = xfs_trans_alloc(mp, XFS_TRANS_RENAME);
cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
- spaceres = XFS_RENAME_SPACE_RES(mp, target_namelen);
+ spaceres = XFS_RENAME_SPACE_RES(mp, target_name->len);
error = xfs_trans_reserve(tp, spaceres, XFS_RENAME_LOG_RES(mp), 0,
XFS_TRANS_PERM_LOG_RES, XFS_RENAME_LOG_COUNT);
if (error == ENOSPC) {
@@ -365,10 +326,10 @@
* them when they unlock the inodes. Also, we need to be careful
* not to add an inode to the transaction more than once.
*/
- VN_HOLD(src_dir_vp);
+ IHOLD(src_dp);
xfs_trans_ijoin(tp, src_dp, XFS_ILOCK_EXCL);
if (new_parent) {
- VN_HOLD(target_dir_vp);
+ IHOLD(target_dp);
xfs_trans_ijoin(tp, target_dp, XFS_ILOCK_EXCL);
}
if ((src_ip != src_dp) && (src_ip != target_dp)) {
@@ -389,9 +350,8 @@
* If there's no space reservation, check the entry will
* fit before actually inserting it.
*/
- if (spaceres == 0 &&
- (error = xfs_dir_canenter(tp, target_dp, target_name,
- target_namelen)))
+ error = xfs_dir_canenter(tp, target_dp, target_name, spaceres);
+ if (error)
goto error_return;
/*
* If target does not exist and the rename crosses
@@ -399,8 +359,8 @@
* to account for the ".." reference from the new entry.
*/
error = xfs_dir_createname(tp, target_dp, target_name,
- target_namelen, src_ip->i_ino,
- &first_block, &free_list, spaceres);
+ src_ip->i_ino, &first_block,
+ &free_list, spaceres);
if (error == ENOSPC)
goto error_return;
if (error)
@@ -439,7 +399,7 @@
* name at the destination directory, remove it first.
*/
error = xfs_dir_replace(tp, target_dp, target_name,
- target_namelen, src_ip->i_ino,
+ src_ip->i_ino,
&first_block, &free_list, spaceres);
if (error)
goto abort_return;
@@ -476,7 +436,8 @@
* Rewrite the ".." entry to point to the new
* directory.
*/
- error = xfs_dir_replace(tp, src_ip, "..", 2, target_dp->i_ino,
+ error = xfs_dir_replace(tp, src_ip, &xfs_name_dotdot,
+ target_dp->i_ino,
&first_block, &free_list, spaceres);
ASSERT(error != EEXIST);
if (error)
@@ -512,8 +473,8 @@
goto abort_return;
}
- error = xfs_dir_removename(tp, src_dp, src_name, src_namelen,
- src_ip->i_ino, &first_block, &free_list, spaceres);
+ error = xfs_dir_removename(tp, src_dp, src_name, src_ip->i_ino,
+ &first_block, &free_list, spaceres);
if (error)
goto abort_return;
xfs_ichgtime(src_dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
@@ -580,10 +541,8 @@
* the vnode references.
*/
error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
- if (target_ip != NULL) {
- xfs_refcache_purge_ip(target_ip);
+ if (target_ip != NULL)
IRELE(target_ip);
- }
/*
* Let interposed file systems know about removed links.
*/
@@ -598,9 +557,9 @@
if (DM_EVENT_ENABLED(src_dp, DM_EVENT_POSTRENAME) ||
DM_EVENT_ENABLED(target_dp, DM_EVENT_POSTRENAME)) {
(void) XFS_SEND_NAMESP (mp, DM_EVENT_POSTRENAME,
- src_dir_vp, DM_RIGHT_NULL,
- target_dir_vp, DM_RIGHT_NULL,
- src_name, target_name,
+ src_dp, DM_RIGHT_NULL,
+ target_dp, DM_RIGHT_NULL,
+ src_name->name, target_name->name,
0, error, 0);
}
return error;
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 47082c0..a0dc6e5 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -44,6 +44,7 @@
#include "xfs_rw.h"
#include "xfs_inode_item.h"
#include "xfs_trans_space.h"
+#include "xfs_utils.h"
/*
@@ -123,14 +124,14 @@
XFS_GROWRTALLOC_LOG_RES(mp), 0,
XFS_TRANS_PERM_LOG_RES,
XFS_DEFAULT_PERM_LOG_COUNT)))
- goto error_exit;
+ goto error_cancel;
cancelflags = XFS_TRANS_RELEASE_LOG_RES;
/*
* Lock the inode.
*/
if ((error = xfs_trans_iget(mp, tp, ino, 0,
XFS_ILOCK_EXCL, &ip)))
- goto error_exit;
+ goto error_cancel;
XFS_BMAP_INIT(&flist, &firstblock);
/*
* Allocate blocks to the bitmap file.
@@ -143,14 +144,16 @@
if (!error && nmap < 1)
error = XFS_ERROR(ENOSPC);
if (error)
- goto error_exit;
+ goto error_cancel;
/*
* Free any blocks freed up in the transaction, then commit.
*/
error = xfs_bmap_finish(&tp, &flist, &committed);
if (error)
- goto error_exit;
- xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
+ goto error_cancel;
+ error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
+ if (error)
+ goto error;
/*
* Now we need to clear the allocated blocks.
* Do this one block per transaction, to keep it simple.
@@ -165,13 +168,13 @@
*/
if ((error = xfs_trans_reserve(tp, 0,
XFS_GROWRTZERO_LOG_RES(mp), 0, 0, 0)))
- goto error_exit;
+ goto error_cancel;
/*
* Lock the bitmap inode.
*/
if ((error = xfs_trans_iget(mp, tp, ino, 0,
XFS_ILOCK_EXCL, &ip)))
- goto error_exit;
+ goto error_cancel;
/*
* Get a buffer for the block.
*/
@@ -180,14 +183,16 @@
mp->m_bsize, 0);
if (bp == NULL) {
error = XFS_ERROR(EIO);
- goto error_exit;
+ goto error_cancel;
}
memset(XFS_BUF_PTR(bp), 0, mp->m_sb.sb_blocksize);
xfs_trans_log_buf(tp, bp, 0, mp->m_sb.sb_blocksize - 1);
/*
* Commit the transaction.
*/
- xfs_trans_commit(tp, 0);
+ error = xfs_trans_commit(tp, 0);
+ if (error)
+ goto error;
}
/*
* Go on to the next extent, if any.
@@ -195,8 +200,9 @@
oblocks = map.br_startoff + map.br_blockcount;
}
return 0;
-error_exit:
+error_cancel:
xfs_trans_cancel(tp, cancelflags);
+error:
return error;
}
@@ -1875,6 +1881,7 @@
xfs_trans_t *tp; /* transaction pointer */
sbp = &mp->m_sb;
+ cancelflags = 0;
/*
* Initial error checking.
*/
@@ -2041,13 +2048,15 @@
*/
mp->m_rsumlevels = nrsumlevels;
mp->m_rsumsize = nrsumsize;
- /*
- * Commit the transaction.
- */
- xfs_trans_commit(tp, 0);
+
+ error = xfs_trans_commit(tp, 0);
+ if (error) {
+ tp = NULL;
+ break;
+ }
}
- if (error)
+ if (error && tp)
xfs_trans_cancel(tp, cancelflags);
/*
@@ -2278,7 +2287,7 @@
ASSERT(sbp->sb_rsumino != NULLFSINO);
error = xfs_iget(mp, NULL, sbp->sb_rsumino, 0, 0, &mp->m_rsumip, 0);
if (error) {
- VN_RELE(XFS_ITOV(mp->m_rbmip));
+ IRELE(mp->m_rbmip);
return error;
}
ASSERT(mp->m_rsumip != NULL);
diff --git a/fs/xfs/xfs_rw.c b/fs/xfs/xfs_rw.c
index cd3ece6..b0f31c0 100644
--- a/fs/xfs/xfs_rw.c
+++ b/fs/xfs/xfs_rw.c
@@ -126,11 +126,11 @@
* when we return.
*/
if (iip && iip->ili_last_lsn) {
- xfs_log_force(mp, iip->ili_last_lsn,
- XFS_LOG_FORCE | XFS_LOG_SYNC);
+ error = _xfs_log_force(mp, iip->ili_last_lsn,
+ XFS_LOG_FORCE | XFS_LOG_SYNC, NULL);
} else if (xfs_ipincount(ip) > 0) {
- xfs_log_force(mp, (xfs_lsn_t)0,
- XFS_LOG_FORCE | XFS_LOG_SYNC);
+ error = _xfs_log_force(mp, (xfs_lsn_t)0,
+ XFS_LOG_FORCE | XFS_LOG_SYNC, NULL);
}
} else {
diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h
index 94660b1..d904efe 100644
--- a/fs/xfs/xfs_sb.h
+++ b/fs/xfs/xfs_sb.h
@@ -89,6 +89,7 @@
/*
* Superblock - in core version. Must match the ondisk version below.
+ * Must be padded to 64 bit alignment.
*/
typedef struct xfs_sb {
__uint32_t sb_magicnum; /* magic number == XFS_SB_MAGIC */
@@ -145,10 +146,21 @@
__uint16_t sb_logsectsize; /* sector size for the log, bytes */
__uint32_t sb_logsunit; /* stripe unit size for the log */
__uint32_t sb_features2; /* additional feature bits */
+
+ /*
+ * bad features2 field as a result of failing to pad the sb
+ * structure to 64 bits. Some machines will be using this field
+ * for features2 bits. Easiest just to mark it bad and not use
+ * it for anything else.
+ */
+ __uint32_t sb_bad_features2;
+
+ /* must be padded to 64 bit alignment */
} xfs_sb_t;
/*
- * Superblock - on disk version. Must match the in core version below.
+ * Superblock - on disk version. Must match the in core version above.
+ * Must be padded to 64 bit alignment.
*/
typedef struct xfs_dsb {
__be32 sb_magicnum; /* magic number == XFS_SB_MAGIC */
@@ -205,6 +217,15 @@
__be16 sb_logsectsize; /* sector size for the log, bytes */
__be32 sb_logsunit; /* stripe unit size for the log */
__be32 sb_features2; /* additional feature bits */
+ /*
+ * bad features2 field as a result of failing to pad the sb
+ * structure to 64 bits. Some machines will be using this field
+ * for features2 bits. Easiest just to mark it bad and not use
+ * it for anything else.
+ */
+ __be32 sb_bad_features2;
+
+ /* must be padded to 64 bit alignment */
} xfs_dsb_t;
/*
@@ -223,7 +244,7 @@
XFS_SBS_GQUOTINO, XFS_SBS_QFLAGS, XFS_SBS_FLAGS, XFS_SBS_SHARED_VN,
XFS_SBS_INOALIGNMT, XFS_SBS_UNIT, XFS_SBS_WIDTH, XFS_SBS_DIRBLKLOG,
XFS_SBS_LOGSECTLOG, XFS_SBS_LOGSECTSIZE, XFS_SBS_LOGSUNIT,
- XFS_SBS_FEATURES2,
+ XFS_SBS_FEATURES2, XFS_SBS_BAD_FEATURES2,
XFS_SBS_FIELDCOUNT
} xfs_sb_field_t;
@@ -248,13 +269,15 @@
#define XFS_SB_IFREE XFS_SB_MVAL(IFREE)
#define XFS_SB_FDBLOCKS XFS_SB_MVAL(FDBLOCKS)
#define XFS_SB_FEATURES2 XFS_SB_MVAL(FEATURES2)
+#define XFS_SB_BAD_FEATURES2 XFS_SB_MVAL(BAD_FEATURES2)
#define XFS_SB_NUM_BITS ((int)XFS_SBS_FIELDCOUNT)
#define XFS_SB_ALL_BITS ((1LL << XFS_SB_NUM_BITS) - 1)
#define XFS_SB_MOD_BITS \
(XFS_SB_UUID | XFS_SB_ROOTINO | XFS_SB_RBMINO | XFS_SB_RSUMINO | \
XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO | XFS_SB_GQUOTINO | \
XFS_SB_QFLAGS | XFS_SB_SHARED_VN | XFS_SB_UNIT | XFS_SB_WIDTH | \
- XFS_SB_ICOUNT | XFS_SB_IFREE | XFS_SB_FDBLOCKS | XFS_SB_FEATURES2)
+ XFS_SB_ICOUNT | XFS_SB_IFREE | XFS_SB_FDBLOCKS | XFS_SB_FEATURES2 | \
+ XFS_SB_BAD_FEATURES2)
/*
@@ -271,7 +294,6 @@
#define XFS_SB_VERSION_NUM(sbp) ((sbp)->sb_versionnum & XFS_SB_VERSION_NUMBITS)
-#define XFS_SB_GOOD_VERSION(sbp) xfs_sb_good_version(sbp)
#ifdef __KERNEL__
static inline int xfs_sb_good_version(xfs_sb_t *sbp)
{
@@ -297,7 +319,15 @@
}
#endif /* __KERNEL__ */
-#define XFS_SB_VERSION_TONEW(v) xfs_sb_version_tonew(v)
+/*
+ * Detect a mismatched features2 field. Older kernels read/wrote
+ * this into the wrong slot, so to be safe we keep them in sync.
+ */
+static inline int xfs_sb_has_mismatched_features2(xfs_sb_t *sbp)
+{
+ return (sbp->sb_bad_features2 != sbp->sb_features2);
+}
+
static inline unsigned xfs_sb_version_tonew(unsigned v)
{
return ((((v) == XFS_SB_VERSION_1) ? \
@@ -308,7 +338,6 @@
XFS_SB_VERSION_4);
}
-#define XFS_SB_VERSION_TOOLD(v) xfs_sb_version_toold(v)
static inline unsigned xfs_sb_version_toold(unsigned v)
{
return (((v) & (XFS_SB_VERSION_QUOTABIT | XFS_SB_VERSION_ALIGNBIT)) ? \
@@ -320,7 +349,6 @@
XFS_SB_VERSION_1)));
}
-#define XFS_SB_VERSION_HASATTR(sbp) xfs_sb_version_hasattr(sbp)
static inline int xfs_sb_version_hasattr(xfs_sb_t *sbp)
{
return ((sbp)->sb_versionnum == XFS_SB_VERSION_2) || \
@@ -329,7 +357,6 @@
((sbp)->sb_versionnum & XFS_SB_VERSION_ATTRBIT));
}
-#define XFS_SB_VERSION_ADDATTR(sbp) xfs_sb_version_addattr(sbp)
static inline void xfs_sb_version_addattr(xfs_sb_t *sbp)
{
(sbp)->sb_versionnum = (((sbp)->sb_versionnum == XFS_SB_VERSION_1) ? \
@@ -339,7 +366,6 @@
(XFS_SB_VERSION_4 | XFS_SB_VERSION_ATTRBIT)));
}
-#define XFS_SB_VERSION_HASNLINK(sbp) xfs_sb_version_hasnlink(sbp)
static inline int xfs_sb_version_hasnlink(xfs_sb_t *sbp)
{
return ((sbp)->sb_versionnum == XFS_SB_VERSION_3) || \
@@ -347,7 +373,6 @@
((sbp)->sb_versionnum & XFS_SB_VERSION_NLINKBIT));
}
-#define XFS_SB_VERSION_ADDNLINK(sbp) xfs_sb_version_addnlink(sbp)
static inline void xfs_sb_version_addnlink(xfs_sb_t *sbp)
{
(sbp)->sb_versionnum = ((sbp)->sb_versionnum <= XFS_SB_VERSION_2 ? \
@@ -355,115 +380,63 @@
((sbp)->sb_versionnum | XFS_SB_VERSION_NLINKBIT));
}
-#define XFS_SB_VERSION_HASQUOTA(sbp) xfs_sb_version_hasquota(sbp)
static inline int xfs_sb_version_hasquota(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_QUOTABIT);
}
-#define XFS_SB_VERSION_ADDQUOTA(sbp) xfs_sb_version_addquota(sbp)
static inline void xfs_sb_version_addquota(xfs_sb_t *sbp)
{
(sbp)->sb_versionnum = \
(XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4 ? \
((sbp)->sb_versionnum | XFS_SB_VERSION_QUOTABIT) : \
- (XFS_SB_VERSION_TONEW((sbp)->sb_versionnum) | \
+ (xfs_sb_version_tonew((sbp)->sb_versionnum) | \
XFS_SB_VERSION_QUOTABIT));
}
-#define XFS_SB_VERSION_HASALIGN(sbp) xfs_sb_version_hasalign(sbp)
static inline int xfs_sb_version_hasalign(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_ALIGNBIT);
}
-#define XFS_SB_VERSION_SUBALIGN(sbp) xfs_sb_version_subalign(sbp)
-static inline void xfs_sb_version_subalign(xfs_sb_t *sbp)
-{
- (sbp)->sb_versionnum = \
- XFS_SB_VERSION_TOOLD((sbp)->sb_versionnum & ~XFS_SB_VERSION_ALIGNBIT);
-}
-
-#define XFS_SB_VERSION_HASDALIGN(sbp) xfs_sb_version_hasdalign(sbp)
static inline int xfs_sb_version_hasdalign(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_DALIGNBIT);
}
-#define XFS_SB_VERSION_ADDDALIGN(sbp) xfs_sb_version_adddalign(sbp)
-static inline int xfs_sb_version_adddalign(xfs_sb_t *sbp)
-{
- return (sbp)->sb_versionnum = \
- ((sbp)->sb_versionnum | XFS_SB_VERSION_DALIGNBIT);
-}
-
-#define XFS_SB_VERSION_HASSHARED(sbp) xfs_sb_version_hasshared(sbp)
static inline int xfs_sb_version_hasshared(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_SHAREDBIT);
}
-#define XFS_SB_VERSION_ADDSHARED(sbp) xfs_sb_version_addshared(sbp)
-static inline int xfs_sb_version_addshared(xfs_sb_t *sbp)
-{
- return (sbp)->sb_versionnum = \
- ((sbp)->sb_versionnum | XFS_SB_VERSION_SHAREDBIT);
-}
-
-#define XFS_SB_VERSION_SUBSHARED(sbp) xfs_sb_version_subshared(sbp)
-static inline int xfs_sb_version_subshared(xfs_sb_t *sbp)
-{
- return (sbp)->sb_versionnum = \
- ((sbp)->sb_versionnum & ~XFS_SB_VERSION_SHAREDBIT);
-}
-
-#define XFS_SB_VERSION_HASDIRV2(sbp) xfs_sb_version_hasdirv2(sbp)
static inline int xfs_sb_version_hasdirv2(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_DIRV2BIT);
}
-#define XFS_SB_VERSION_HASLOGV2(sbp) xfs_sb_version_haslogv2(sbp)
static inline int xfs_sb_version_haslogv2(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_LOGV2BIT);
}
-#define XFS_SB_VERSION_HASEXTFLGBIT(sbp) xfs_sb_version_hasextflgbit(sbp)
static inline int xfs_sb_version_hasextflgbit(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_EXTFLGBIT);
}
-#define XFS_SB_VERSION_ADDEXTFLGBIT(sbp) xfs_sb_version_addextflgbit(sbp)
-static inline int xfs_sb_version_addextflgbit(xfs_sb_t *sbp)
-{
- return (sbp)->sb_versionnum = \
- ((sbp)->sb_versionnum | XFS_SB_VERSION_EXTFLGBIT);
-}
-
-#define XFS_SB_VERSION_SUBEXTFLGBIT(sbp) xfs_sb_version_subextflgbit(sbp)
-static inline int xfs_sb_version_subextflgbit(xfs_sb_t *sbp)
-{
- return (sbp)->sb_versionnum = \
- ((sbp)->sb_versionnum & ~XFS_SB_VERSION_EXTFLGBIT);
-}
-
-#define XFS_SB_VERSION_HASSECTOR(sbp) xfs_sb_version_hassector(sbp)
static inline int xfs_sb_version_hassector(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_SECTORBIT);
}
-#define XFS_SB_VERSION_HASMOREBITS(sbp) xfs_sb_version_hasmorebits(sbp)
static inline int xfs_sb_version_hasmorebits(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
@@ -476,24 +449,22 @@
* For example, for a bit defined as XFS_SB_VERSION2_FUNBIT, has a macro:
*
* SB_VERSION_HASFUNBIT(xfs_sb_t *sbp)
- * ((XFS_SB_VERSION_HASMOREBITS(sbp) &&
+ * ((xfs_sb_version_hasmorebits(sbp) &&
* ((sbp)->sb_features2 & XFS_SB_VERSION2_FUNBIT)
*/
static inline int xfs_sb_version_haslazysbcount(xfs_sb_t *sbp)
{
- return (XFS_SB_VERSION_HASMOREBITS(sbp) && \
+ return (xfs_sb_version_hasmorebits(sbp) && \
((sbp)->sb_features2 & XFS_SB_VERSION2_LAZYSBCOUNTBIT));
}
-#define XFS_SB_VERSION_HASATTR2(sbp) xfs_sb_version_hasattr2(sbp)
static inline int xfs_sb_version_hasattr2(xfs_sb_t *sbp)
{
- return (XFS_SB_VERSION_HASMOREBITS(sbp)) && \
+ return (xfs_sb_version_hasmorebits(sbp)) && \
((sbp)->sb_features2 & XFS_SB_VERSION2_ATTR2BIT);
}
-#define XFS_SB_VERSION_ADDATTR2(sbp) xfs_sb_version_addattr2(sbp)
static inline void xfs_sb_version_addattr2(xfs_sb_t *sbp)
{
((sbp)->sb_versionnum = \
diff --git a/fs/xfs/xfs_trans.h b/fs/xfs/xfs_trans.h
index 7f40628..0804207 100644
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -113,13 +113,8 @@
struct xfs_trans;
struct xfs_dquot_acct;
-typedef struct xfs_ail_entry {
- struct xfs_log_item *ail_forw; /* AIL forw pointer */
- struct xfs_log_item *ail_back; /* AIL back pointer */
-} xfs_ail_entry_t;
-
typedef struct xfs_log_item {
- xfs_ail_entry_t li_ail; /* AIL pointers */
+ struct list_head li_ail; /* AIL pointers */
xfs_lsn_t li_lsn; /* last on-disk lsn */
struct xfs_log_item_desc *li_desc; /* ptr to current desc*/
struct xfs_mount *li_mountp; /* ptr to fs mount */
@@ -341,7 +336,6 @@
unsigned int t_rtx_res; /* # of rt extents resvd */
unsigned int t_rtx_res_used; /* # of resvd rt extents used */
xfs_log_ticket_t t_ticket; /* log mgr ticket */
- sema_t t_sema; /* sema for commit completion */
xfs_lsn_t t_lsn; /* log seq num of start of
* transaction. */
xfs_lsn_t t_commit_lsn; /* log seq num of end of
diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c
index 76d470d..1f77c00 100644
--- a/fs/xfs/xfs_trans_ail.c
+++ b/fs/xfs/xfs_trans_ail.c
@@ -28,13 +28,13 @@
#include "xfs_trans_priv.h"
#include "xfs_error.h"
-STATIC void xfs_ail_insert(xfs_ail_entry_t *, xfs_log_item_t *);
-STATIC xfs_log_item_t * xfs_ail_delete(xfs_ail_entry_t *, xfs_log_item_t *);
-STATIC xfs_log_item_t * xfs_ail_min(xfs_ail_entry_t *);
-STATIC xfs_log_item_t * xfs_ail_next(xfs_ail_entry_t *, xfs_log_item_t *);
+STATIC void xfs_ail_insert(xfs_ail_t *, xfs_log_item_t *);
+STATIC xfs_log_item_t * xfs_ail_delete(xfs_ail_t *, xfs_log_item_t *);
+STATIC xfs_log_item_t * xfs_ail_min(xfs_ail_t *);
+STATIC xfs_log_item_t * xfs_ail_next(xfs_ail_t *, xfs_log_item_t *);
#ifdef DEBUG
-STATIC void xfs_ail_check(xfs_ail_entry_t *, xfs_log_item_t *);
+STATIC void xfs_ail_check(xfs_ail_t *, xfs_log_item_t *);
#else
#define xfs_ail_check(a,l)
#endif /* DEBUG */
@@ -57,7 +57,7 @@
xfs_log_item_t *lip;
spin_lock(&mp->m_ail_lock);
- lip = xfs_ail_min(&(mp->m_ail.xa_ail));
+ lip = xfs_ail_min(&mp->m_ail);
if (lip == NULL) {
lsn = (xfs_lsn_t)0;
} else {
@@ -91,7 +91,7 @@
{
xfs_log_item_t *lip;
- lip = xfs_ail_min(&mp->m_ail.xa_ail);
+ lip = xfs_ail_min(&mp->m_ail);
if (lip && !XFS_FORCED_SHUTDOWN(mp)) {
if (XFS_LSN_CMP(threshold_lsn, mp->m_ail.xa_target) > 0)
xfsaild_wakeup(mp, threshold_lsn);
@@ -111,15 +111,17 @@
{
xfs_log_item_t *lip;
- lip = xfs_ail_min(&(mp->m_ail.xa_ail));
+ lip = xfs_ail_min(&mp->m_ail);
*gen = (int)mp->m_ail.xa_gen;
if (lsn == 0)
return lip;
- while (lip && (XFS_LSN_CMP(lip->li_lsn, lsn) < 0))
- lip = lip->li_ail.ail_forw;
+ list_for_each_entry(lip, &mp->m_ail.xa_ail, li_ail) {
+ if (XFS_LSN_CMP(lip->li_lsn, lsn) >= 0)
+ return lip;
+ }
- return lip;
+ return NULL;
}
/*
@@ -329,7 +331,7 @@
* the call to xfs_log_move_tail() doesn't do anything if there's
* not enough free space to wake people up so we're safe calling it.
*/
- min_lip = xfs_ail_min(&mp->m_ail.xa_ail);
+ min_lip = xfs_ail_min(&mp->m_ail);
if (min_lip == lip)
xfs_log_move_tail(mp, 1);
@@ -357,15 +359,13 @@
xfs_log_item_t *lip,
xfs_lsn_t lsn) __releases(mp->m_ail_lock)
{
- xfs_ail_entry_t *ailp;
xfs_log_item_t *dlip=NULL;
xfs_log_item_t *mlip; /* ptr to minimum lip */
- ailp = &(mp->m_ail.xa_ail);
- mlip = xfs_ail_min(ailp);
+ mlip = xfs_ail_min(&mp->m_ail);
if (lip->li_flags & XFS_LI_IN_AIL) {
- dlip = xfs_ail_delete(ailp, lip);
+ dlip = xfs_ail_delete(&mp->m_ail, lip);
ASSERT(dlip == lip);
} else {
lip->li_flags |= XFS_LI_IN_AIL;
@@ -373,11 +373,11 @@
lip->li_lsn = lsn;
- xfs_ail_insert(ailp, lip);
+ xfs_ail_insert(&mp->m_ail, lip);
mp->m_ail.xa_gen++;
if (mlip == dlip) {
- mlip = xfs_ail_min(&(mp->m_ail.xa_ail));
+ mlip = xfs_ail_min(&mp->m_ail);
spin_unlock(&mp->m_ail_lock);
xfs_log_move_tail(mp, mlip->li_lsn);
} else {
@@ -407,14 +407,12 @@
xfs_mount_t *mp,
xfs_log_item_t *lip) __releases(mp->m_ail_lock)
{
- xfs_ail_entry_t *ailp;
xfs_log_item_t *dlip;
xfs_log_item_t *mlip;
if (lip->li_flags & XFS_LI_IN_AIL) {
- ailp = &(mp->m_ail.xa_ail);
- mlip = xfs_ail_min(ailp);
- dlip = xfs_ail_delete(ailp, lip);
+ mlip = xfs_ail_min(&mp->m_ail);
+ dlip = xfs_ail_delete(&mp->m_ail, lip);
ASSERT(dlip == lip);
@@ -423,7 +421,7 @@
mp->m_ail.xa_gen++;
if (mlip == dlip) {
- mlip = xfs_ail_min(&(mp->m_ail.xa_ail));
+ mlip = xfs_ail_min(&mp->m_ail);
spin_unlock(&mp->m_ail_lock);
xfs_log_move_tail(mp, (mlip ? mlip->li_lsn : 0));
} else {
@@ -440,7 +438,7 @@
else {
xfs_cmn_err(XFS_PTAG_AILDELETE, CE_ALERT, mp,
"%s: attempting to delete a log item that is not in the AIL",
- __FUNCTION__);
+ __func__);
spin_unlock(&mp->m_ail_lock);
xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
}
@@ -461,7 +459,7 @@
{
xfs_log_item_t *lip;
- lip = xfs_ail_min(&(mp->m_ail.xa_ail));
+ lip = xfs_ail_min(&mp->m_ail);
*gen = (int)mp->m_ail.xa_gen;
return lip;
@@ -485,9 +483,9 @@
ASSERT(mp && lip && gen);
if (mp->m_ail.xa_gen == *gen) {
- nlip = xfs_ail_next(&(mp->m_ail.xa_ail), lip);
+ nlip = xfs_ail_next(&mp->m_ail, lip);
} else {
- nlip = xfs_ail_min(&(mp->m_ail).xa_ail);
+ nlip = xfs_ail_min(&mp->m_ail);
*gen = (int)mp->m_ail.xa_gen;
if (restarts != NULL) {
XFS_STATS_INC(xs_push_ail_restarts);
@@ -517,8 +515,7 @@
xfs_trans_ail_init(
xfs_mount_t *mp)
{
- mp->m_ail.xa_ail.ail_forw = (xfs_log_item_t*)&mp->m_ail.xa_ail;
- mp->m_ail.xa_ail.ail_back = (xfs_log_item_t*)&mp->m_ail.xa_ail;
+ INIT_LIST_HEAD(&mp->m_ail.xa_ail);
return xfsaild_start(mp);
}
@@ -537,7 +534,7 @@
*/
STATIC void
xfs_ail_insert(
- xfs_ail_entry_t *base,
+ xfs_ail_t *ailp,
xfs_log_item_t *lip)
/* ARGSUSED */
{
@@ -546,27 +543,22 @@
/*
* If the list is empty, just insert the item.
*/
- if (base->ail_back == (xfs_log_item_t*)base) {
- base->ail_forw = lip;
- base->ail_back = lip;
- lip->li_ail.ail_forw = (xfs_log_item_t*)base;
- lip->li_ail.ail_back = (xfs_log_item_t*)base;
+ if (list_empty(&ailp->xa_ail)) {
+ list_add(&lip->li_ail, &ailp->xa_ail);
return;
}
- next_lip = base->ail_back;
- while ((next_lip != (xfs_log_item_t*)base) &&
- (XFS_LSN_CMP(next_lip->li_lsn, lip->li_lsn) > 0)) {
- next_lip = next_lip->li_ail.ail_back;
+ list_for_each_entry_reverse(next_lip, &ailp->xa_ail, li_ail) {
+ if (XFS_LSN_CMP(next_lip->li_lsn, lip->li_lsn) <= 0)
+ break;
}
- ASSERT((next_lip == (xfs_log_item_t*)base) ||
- (XFS_LSN_CMP(next_lip->li_lsn, lip->li_lsn) <= 0));
- lip->li_ail.ail_forw = next_lip->li_ail.ail_forw;
- lip->li_ail.ail_back = next_lip;
- next_lip->li_ail.ail_forw = lip;
- lip->li_ail.ail_forw->li_ail.ail_back = lip;
- xfs_ail_check(base, lip);
+ ASSERT((&next_lip->li_ail == &ailp->xa_ail) ||
+ (XFS_LSN_CMP(next_lip->li_lsn, lip->li_lsn) <= 0));
+
+ list_add(&lip->li_ail, &next_lip->li_ail);
+
+ xfs_ail_check(ailp, lip);
return;
}
@@ -576,15 +568,13 @@
/*ARGSUSED*/
STATIC xfs_log_item_t *
xfs_ail_delete(
- xfs_ail_entry_t *base,
+ xfs_ail_t *ailp,
xfs_log_item_t *lip)
/* ARGSUSED */
{
- xfs_ail_check(base, lip);
- lip->li_ail.ail_forw->li_ail.ail_back = lip->li_ail.ail_back;
- lip->li_ail.ail_back->li_ail.ail_forw = lip->li_ail.ail_forw;
- lip->li_ail.ail_forw = NULL;
- lip->li_ail.ail_back = NULL;
+ xfs_ail_check(ailp, lip);
+
+ list_del(&lip->li_ail);
return lip;
}
@@ -595,14 +585,13 @@
*/
STATIC xfs_log_item_t *
xfs_ail_min(
- xfs_ail_entry_t *base)
+ xfs_ail_t *ailp)
/* ARGSUSED */
{
- register xfs_log_item_t *forw = base->ail_forw;
- if (forw == (xfs_log_item_t*)base) {
+ if (list_empty(&ailp->xa_ail))
return NULL;
- }
- return forw;
+
+ return list_first_entry(&ailp->xa_ail, xfs_log_item_t, li_ail);
}
/*
@@ -612,15 +601,14 @@
*/
STATIC xfs_log_item_t *
xfs_ail_next(
- xfs_ail_entry_t *base,
+ xfs_ail_t *ailp,
xfs_log_item_t *lip)
/* ARGSUSED */
{
- if (lip->li_ail.ail_forw == (xfs_log_item_t*)base) {
+ if (lip->li_ail.next == &ailp->xa_ail)
return NULL;
- }
- return lip->li_ail.ail_forw;
+ return list_first_entry(&lip->li_ail, xfs_log_item_t, li_ail);
}
#ifdef DEBUG
@@ -629,57 +617,40 @@
*/
STATIC void
xfs_ail_check(
- xfs_ail_entry_t *base,
+ xfs_ail_t *ailp,
xfs_log_item_t *lip)
{
xfs_log_item_t *prev_lip;
- prev_lip = base->ail_forw;
- if (prev_lip == (xfs_log_item_t*)base) {
- /*
- * Make sure the pointers are correct when the list
- * is empty.
- */
- ASSERT(base->ail_back == (xfs_log_item_t*)base);
+ if (list_empty(&ailp->xa_ail))
return;
- }
/*
* Check the next and previous entries are valid.
*/
ASSERT((lip->li_flags & XFS_LI_IN_AIL) != 0);
- prev_lip = lip->li_ail.ail_back;
- if (prev_lip != (xfs_log_item_t*)base) {
- ASSERT(prev_lip->li_ail.ail_forw == lip);
+ prev_lip = list_entry(lip->li_ail.prev, xfs_log_item_t, li_ail);
+ if (&prev_lip->li_ail != &ailp->xa_ail)
ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) <= 0);
- }
- prev_lip = lip->li_ail.ail_forw;
- if (prev_lip != (xfs_log_item_t*)base) {
- ASSERT(prev_lip->li_ail.ail_back == lip);
+
+ prev_lip = list_entry(lip->li_ail.next, xfs_log_item_t, li_ail);
+ if (&prev_lip->li_ail != &ailp->xa_ail)
ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) >= 0);
- }
#ifdef XFS_TRANS_DEBUG
/*
- * Walk the list checking forward and backward pointers,
- * lsn ordering, and that every entry has the XFS_LI_IN_AIL
- * flag set. This is really expensive, so only do it when
- * specifically debugging the transaction subsystem.
+ * Walk the list checking lsn ordering, and that every entry has the
+ * XFS_LI_IN_AIL flag set. This is really expensive, so only do it
+ * when specifically debugging the transaction subsystem.
*/
- prev_lip = (xfs_log_item_t*)base;
- while (lip != (xfs_log_item_t*)base) {
- if (prev_lip != (xfs_log_item_t*)base) {
- ASSERT(prev_lip->li_ail.ail_forw == lip);
+ prev_lip = list_entry(&ailp->xa_ail, xfs_log_item_t, li_ail);
+ list_for_each_entry(lip, &ailp->xa_ail, li_ail) {
+ if (&prev_lip->li_ail != &ailp->xa_ail)
ASSERT(XFS_LSN_CMP(prev_lip->li_lsn, lip->li_lsn) <= 0);
- }
- ASSERT(lip->li_ail.ail_back == prev_lip);
ASSERT((lip->li_flags & XFS_LI_IN_AIL) != 0);
prev_lip = lip;
- lip = lip->li_ail.ail_forw;
}
- ASSERT(lip == (xfs_log_item_t*)base);
- ASSERT(base->ail_back == prev_lip);
#endif /* XFS_TRANS_DEBUG */
}
#endif /* DEBUG */
diff --git a/fs/xfs/xfs_trans_buf.c b/fs/xfs/xfs_trans_buf.c
index 60b6b89..cb0c583 100644
--- a/fs/xfs/xfs_trans_buf.c
+++ b/fs/xfs/xfs_trans_buf.c
@@ -304,7 +304,8 @@
if (tp == NULL) {
bp = xfs_buf_read_flags(target, blkno, len, flags | BUF_BUSY);
if (!bp)
- return XFS_ERROR(ENOMEM);
+ return (flags & XFS_BUF_TRYLOCK) ?
+ EAGAIN : XFS_ERROR(ENOMEM);
if ((bp != NULL) && (XFS_BUF_GETERROR(bp) != 0)) {
xfs_ioerror_alert("xfs_trans_read_buf", mp,
@@ -353,17 +354,15 @@
ASSERT(!XFS_BUF_ISASYNC(bp));
XFS_BUF_READ(bp);
xfsbdstrat(tp->t_mountp, bp);
- xfs_iowait(bp);
- if (XFS_BUF_GETERROR(bp) != 0) {
+ error = xfs_iowait(bp);
+ if (error) {
xfs_ioerror_alert("xfs_trans_read_buf", mp,
bp, blkno);
- error = XFS_BUF_GETERROR(bp);
xfs_buf_relse(bp);
/*
- * We can gracefully recover from most
- * read errors. Ones we can't are those
- * that happen after the transaction's
- * already dirty.
+ * We can gracefully recover from most read
+ * errors. Ones we can't are those that happen
+ * after the transaction's already dirty.
*/
if (tp->t_flags & XFS_TRANS_DIRTY)
xfs_force_shutdown(tp->t_mountp,
diff --git a/fs/xfs/xfs_types.h b/fs/xfs/xfs_types.h
index 5c89be4..0f51916 100644
--- a/fs/xfs/xfs_types.h
+++ b/fs/xfs/xfs_types.h
@@ -160,4 +160,9 @@
XFS_BTNUM_MAX
} xfs_btnum_t;
+struct xfs_name {
+ const char *name;
+ int len;
+};
+
#endif /* __XFS_TYPES_H__ */
diff --git a/fs/xfs/xfs_utils.c b/fs/xfs/xfs_utils.c
index 45d740d..2b8dc7e 100644
--- a/fs/xfs/xfs_utils.c
+++ b/fs/xfs/xfs_utils.c
@@ -40,34 +40,12 @@
#include "xfs_itable.h"
#include "xfs_utils.h"
-/*
- * xfs_get_dir_entry is used to get a reference to an inode given
- * its parent directory inode and the name of the file. It does
- * not lock the child inode, and it unlocks the directory before
- * returning. The directory's generation number is returned for
- * use by a later call to xfs_lock_dir_and_entry.
- */
-int
-xfs_get_dir_entry(
- bhv_vname_t *dentry,
- xfs_inode_t **ipp)
-{
- bhv_vnode_t *vp;
-
- vp = VNAME_TO_VNODE(dentry);
-
- *ipp = xfs_vtoi(vp);
- if (!*ipp)
- return XFS_ERROR(ENOENT);
- VN_HOLD(vp);
- return 0;
-}
int
xfs_dir_lookup_int(
xfs_inode_t *dp,
uint lock_mode,
- bhv_vname_t *dentry,
+ struct xfs_name *name,
xfs_ino_t *inum,
xfs_inode_t **ipp)
{
@@ -75,7 +53,7 @@
xfs_itrace_entry(dp);
- error = xfs_dir_lookup(NULL, dp, VNAME(dentry), VNAMELEN(dentry), inum);
+ error = xfs_dir_lookup(NULL, dp, name, inum);
if (!error) {
/*
* Unlock the directory. We do this because we can't
@@ -339,10 +317,10 @@
ip->i_d.di_onlink = 0;
memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad));
mp = tp->t_mountp;
- if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
+ if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
spin_lock(&mp->m_sb_lock);
- if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
- XFS_SB_VERSION_ADDNLINK(&mp->m_sb);
+ if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
+ xfs_sb_version_addnlink(&mp->m_sb);
spin_unlock(&mp->m_sb_lock);
xfs_mod_sb(tp, XFS_SB_VERSIONNUM);
} else {
diff --git a/fs/xfs/xfs_utils.h b/fs/xfs/xfs_utils.h
index f857fcc..175b126 100644
--- a/fs/xfs/xfs_utils.h
+++ b/fs/xfs/xfs_utils.h
@@ -21,15 +21,14 @@
#define IRELE(ip) VN_RELE(XFS_ITOV(ip))
#define IHOLD(ip) VN_HOLD(XFS_ITOV(ip))
-extern int xfs_get_dir_entry (bhv_vname_t *, xfs_inode_t **);
-extern int xfs_dir_lookup_int (xfs_inode_t *, uint, bhv_vname_t *, xfs_ino_t *,
- xfs_inode_t **);
-extern int xfs_truncate_file (xfs_mount_t *, xfs_inode_t *);
-extern int xfs_dir_ialloc (xfs_trans_t **, xfs_inode_t *, mode_t, xfs_nlink_t,
+extern int xfs_dir_lookup_int(xfs_inode_t *, uint, struct xfs_name *,
+ xfs_ino_t *, xfs_inode_t **);
+extern int xfs_truncate_file(xfs_mount_t *, xfs_inode_t *);
+extern int xfs_dir_ialloc(xfs_trans_t **, xfs_inode_t *, mode_t, xfs_nlink_t,
xfs_dev_t, cred_t *, prid_t, int,
xfs_inode_t **, int *);
-extern int xfs_droplink (xfs_trans_t *, xfs_inode_t *);
-extern int xfs_bumplink (xfs_trans_t *, xfs_inode_t *);
-extern void xfs_bump_ino_vers2 (xfs_trans_t *, xfs_inode_t *);
+extern int xfs_droplink(xfs_trans_t *, xfs_inode_t *);
+extern int xfs_bumplink(xfs_trans_t *, xfs_inode_t *);
+extern void xfs_bump_ino_vers2(xfs_trans_t *, xfs_inode_t *);
#endif /* __XFS_UTILS_H__ */
diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c
index 7321304..fc48158 100644
--- a/fs/xfs/xfs_vfsops.c
+++ b/fs/xfs/xfs_vfsops.c
@@ -43,7 +43,6 @@
#include "xfs_error.h"
#include "xfs_bmap.h"
#include "xfs_rw.h"
-#include "xfs_refcache.h"
#include "xfs_buf_item.h"
#include "xfs_log_priv.h"
#include "xfs_dir2_trace.h"
@@ -56,6 +55,7 @@
#include "xfs_fsops.h"
#include "xfs_vnodeops.h"
#include "xfs_vfsops.h"
+#include "xfs_utils.h"
int __init
@@ -69,15 +69,17 @@
/*
* Initialize all of the zone allocators we use.
*/
+ xfs_log_ticket_zone = kmem_zone_init(sizeof(xlog_ticket_t),
+ "xfs_log_ticket");
xfs_bmap_free_item_zone = kmem_zone_init(sizeof(xfs_bmap_free_item_t),
- "xfs_bmap_free_item");
+ "xfs_bmap_free_item");
xfs_btree_cur_zone = kmem_zone_init(sizeof(xfs_btree_cur_t),
- "xfs_btree_cur");
- xfs_trans_zone = kmem_zone_init(sizeof(xfs_trans_t), "xfs_trans");
- xfs_da_state_zone =
- kmem_zone_init(sizeof(xfs_da_state_t), "xfs_da_state");
+ "xfs_btree_cur");
+ xfs_da_state_zone = kmem_zone_init(sizeof(xfs_da_state_t),
+ "xfs_da_state");
xfs_dabuf_zone = kmem_zone_init(sizeof(xfs_dabuf_t), "xfs_dabuf");
xfs_ifork_zone = kmem_zone_init(sizeof(xfs_ifork_t), "xfs_ifork");
+ xfs_trans_zone = kmem_zone_init(sizeof(xfs_trans_t), "xfs_trans");
xfs_acl_zone_init(xfs_acl_zone, "xfs_acl");
xfs_mru_cache_init();
xfs_filestream_init();
@@ -113,9 +115,6 @@
xfs_ili_zone =
kmem_zone_init_flags(sizeof(xfs_inode_log_item_t), "xfs_ili",
KM_ZONE_SPREAD, NULL);
- xfs_icluster_zone =
- kmem_zone_init_flags(sizeof(xfs_icluster_t), "xfs_icluster",
- KM_ZONE_SPREAD, NULL);
/*
* Allocate global trace buffers.
@@ -153,11 +152,9 @@
extern kmem_zone_t *xfs_inode_zone;
extern kmem_zone_t *xfs_efd_zone;
extern kmem_zone_t *xfs_efi_zone;
- extern kmem_zone_t *xfs_icluster_zone;
xfs_cleanup_procfs();
xfs_sysctl_unregister();
- xfs_refcache_destroy();
xfs_filestream_uninit();
xfs_mru_cache_uninit();
xfs_acl_zone_destroy(xfs_acl_zone);
@@ -189,7 +186,6 @@
kmem_zone_destroy(xfs_efi_zone);
kmem_zone_destroy(xfs_ifork_zone);
kmem_zone_destroy(xfs_ili_zone);
- kmem_zone_destroy(xfs_icluster_zone);
}
/*
@@ -330,7 +326,7 @@
int ronly = (mp->m_flags & XFS_MOUNT_RDONLY);
/* Fail a mount where the logbuf is smaller then the log stripe */
- if (XFS_SB_VERSION_HASLOGV2(&mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&mp->m_sb)) {
if ((ap->logbufsize <= 0) &&
(mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) {
mp->m_logbsize = mp->m_sb.sb_logsunit;
@@ -349,9 +345,8 @@
}
}
- if (XFS_SB_VERSION_HASATTR2(&mp->m_sb)) {
+ if (xfs_sb_version_hasattr2(&mp->m_sb))
mp->m_flags |= XFS_MOUNT_ATTR2;
- }
/*
* prohibit r/w mounts of read-only filesystems
@@ -366,7 +361,7 @@
* check for shared mount.
*/
if (ap->flags & XFSMNT_SHARED) {
- if (!XFS_SB_VERSION_HASSHARED(&mp->m_sb))
+ if (!xfs_sb_version_hasshared(&mp->m_sb))
return XFS_ERROR(EINVAL);
/*
@@ -512,7 +507,7 @@
if (!error && logdev && logdev != ddev) {
unsigned int log_sector_size = BBSIZE;
- if (XFS_SB_VERSION_HASSECTOR(&mp->m_sb))
+ if (xfs_sb_version_hassector(&mp->m_sb))
log_sector_size = mp->m_sb.sb_logsectsize;
error = xfs_setsize_buftarg(mp->m_logdev_targp,
mp->m_sb.sb_blocksize,
@@ -574,7 +569,7 @@
#ifdef HAVE_DMAPI
if (mp->m_flags & XFS_MOUNT_DMAPI) {
error = XFS_SEND_PREUNMOUNT(mp,
- rvp, DM_RIGHT_NULL, rvp, DM_RIGHT_NULL,
+ rip, DM_RIGHT_NULL, rip, DM_RIGHT_NULL,
NULL, NULL, 0, 0,
(mp->m_dmevmask & (1<<DM_EVENT_PREUNMOUNT))?
0:DM_FLAGS_UNWANTED);
@@ -585,11 +580,6 @@
0 : DM_FLAGS_UNWANTED;
}
#endif
- /*
- * First blow any referenced inode from this file system
- * out of the reference cache, and delete the timer.
- */
- xfs_refcache_purge_mp(mp);
/*
* Blow away any referenced inode in the filestreams cache.
@@ -608,7 +598,7 @@
/*
* Drop the reference count
*/
- VN_RELE(rvp);
+ IRELE(rip);
/*
* If we're forcing a shutdown, typically because of a media error,
@@ -630,7 +620,7 @@
/* Note: mp structure must still exist for
* XFS_SEND_UNMOUNT() call.
*/
- XFS_SEND_UNMOUNT(mp, error == 0 ? rvp : NULL,
+ XFS_SEND_UNMOUNT(mp, error == 0 ? rip : NULL,
DM_RIGHT_NULL, 0, error, unmount_event_flags);
}
if (xfs_unmountfs_needed) {
@@ -647,13 +637,12 @@
return XFS_ERROR(error);
}
-STATIC int
+STATIC void
xfs_quiesce_fs(
xfs_mount_t *mp)
{
int count = 0, pincount;
- xfs_refcache_purge_mp(mp);
xfs_flush_buftarg(mp->m_ddev_targp, 0);
xfs_finish_reclaim_all(mp, 0);
@@ -672,8 +661,6 @@
count++;
}
} while (count < 2);
-
- return 0;
}
/*
@@ -685,6 +672,8 @@
xfs_attr_quiesce(
xfs_mount_t *mp)
{
+ int error = 0;
+
/* wait for all modifications to complete */
while (atomic_read(&mp->m_active_trans) > 0)
delay(100);
@@ -695,7 +684,11 @@
ASSERT_ALWAYS(atomic_read(&mp->m_active_trans) == 0);
/* Push the superblock and write an unmount record */
- xfs_log_sbcount(mp, 1);
+ error = xfs_log_sbcount(mp, 1);
+ if (error)
+ xfs_fs_cmn_err(CE_WARN, mp,
+ "xfs_attr_quiesce: failed to log sb changes. "
+ "Frozen image may not be consistent.");
xfs_log_unmount_write(mp);
xfs_unmountfs_writesb(mp);
}
@@ -791,8 +784,8 @@
goto fscorrupt_out2;
if (rbmip) {
- VN_RELE(XFS_ITOV(rbmip));
- VN_RELE(XFS_ITOV(rsumip));
+ IRELE(rbmip);
+ IRELE(rsumip);
}
xfs_iunlock(rip, XFS_ILOCK_EXCL);
@@ -1170,10 +1163,10 @@
* above, then wait until after we've unlocked
* the inode to release the reference. This is
* because we can be already holding the inode
- * lock when VN_RELE() calls xfs_inactive().
+ * lock when IRELE() calls xfs_inactive().
*
* Make sure to drop the mount lock before calling
- * VN_RELE() so that we don't trip over ourselves if
+ * IRELE() so that we don't trip over ourselves if
* we have to go for the mount lock again in the
* inactive code.
*/
@@ -1181,7 +1174,7 @@
IPOINTER_INSERT(ip, mp);
}
- VN_RELE(vp);
+ IRELE(ip);
vnode_refed = B_FALSE;
}
@@ -1324,30 +1317,8 @@
}
/*
- * If this is the periodic sync, then kick some entries out of
- * the reference cache. This ensures that idle entries are
- * eventually kicked out of the cache.
- */
- if (flags & SYNC_REFCACHE) {
- if (flags & SYNC_WAIT)
- xfs_refcache_purge_mp(mp);
- else
- xfs_refcache_purge_some(mp);
- }
-
- /*
- * If asked, update the disk superblock with incore counter values if we
- * are using non-persistent counters so that they don't get too far out
- * of sync if we crash or get a forced shutdown. We don't want to force
- * this to disk, just get a transaction into the iclogs....
- */
- if (flags & SYNC_SUPER)
- xfs_log_sbcount(mp, 0);
-
- /*
* Now check to see if the log needs a "dummy" transaction.
*/
-
if (!(flags & SYNC_REMOUNT) && xfs_log_need_covered(mp)) {
xfs_trans_t *tp;
xfs_inode_t *ip;
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 5130524..6650601 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -48,7 +48,6 @@
#include "xfs_quota.h"
#include "xfs_utils.h"
#include "xfs_rtalloc.h"
-#include "xfs_refcache.h"
#include "xfs_trans_space.h"
#include "xfs_log_priv.h"
#include "xfs_filestream.h"
@@ -327,7 +326,7 @@
if (DM_EVENT_ENABLED(ip, DM_EVENT_TRUNCATE) &&
!(flags & ATTR_DMI)) {
int dmflags = AT_DELAY_FLAG(flags) | DM_SEM_FLAG_WR;
- code = XFS_SEND_DATA(mp, DM_EVENT_TRUNCATE, vp,
+ code = XFS_SEND_DATA(mp, DM_EVENT_TRUNCATE, ip,
vap->va_size, 0, dmflags, NULL);
if (code) {
lock_flags = 0;
@@ -634,6 +633,15 @@
* Truncate file. Must have write permission and not be a directory.
*/
if (mask & XFS_AT_SIZE) {
+ /*
+ * Only change the c/mtime if we are changing the size
+ * or we are explicitly asked to change it. This handles
+ * the semantic difference between truncate() and ftruncate()
+ * as implemented in the VFS.
+ */
+ if (vap->va_size != ip->i_size || (mask & XFS_AT_CTIME))
+ timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG;
+
if (vap->va_size > ip->i_size) {
xfs_igrow_finish(tp, ip, vap->va_size,
!(flags & ATTR_DMI));
@@ -662,10 +670,6 @@
*/
xfs_iflags_set(ip, XFS_ITRUNCATED);
}
- /*
- * Have to do this even if the file's size doesn't change.
- */
- timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG;
}
/*
@@ -877,7 +881,7 @@
if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE) &&
!(flags & ATTR_DMI)) {
- (void) XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, vp, DM_RIGHT_NULL,
+ (void) XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL,
NULL, DM_RIGHT_NULL, NULL, NULL,
0, 0, AT_DELAY_FLAG(flags));
}
@@ -1443,28 +1447,22 @@
tp = *tpp;
mp = ip->i_mount;
ASSERT(ip->i_d.di_forkoff != 0);
- xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
+ error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ if (error)
+ goto error_unlock;
error = xfs_attr_inactive(ip);
- if (error) {
- *tpp = NULL;
- xfs_iunlock(ip, XFS_IOLOCK_EXCL);
- return error; /* goto out */
- }
+ if (error)
+ goto error_unlock;
tp = xfs_trans_alloc(mp, XFS_TRANS_INACTIVE);
error = xfs_trans_reserve(tp, 0,
XFS_IFREE_LOG_RES(mp),
0, XFS_TRANS_PERM_LOG_RES,
XFS_INACTIVE_LOG_COUNT);
- if (error) {
- ASSERT(XFS_FORCED_SHUTDOWN(mp));
- xfs_trans_cancel(tp, 0);
- *tpp = NULL;
- xfs_iunlock(ip, XFS_IOLOCK_EXCL);
- return error;
- }
+ if (error)
+ goto error_cancel;
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, XFS_IOLOCK_EXCL | XFS_ILOCK_EXCL);
@@ -1475,6 +1473,14 @@
*tpp = tp;
return 0;
+
+error_cancel:
+ ASSERT(XFS_FORCED_SHUTDOWN(mp));
+ xfs_trans_cancel(tp, 0);
+error_unlock:
+ *tpp = NULL;
+ xfs_iunlock(ip, XFS_IOLOCK_EXCL);
+ return error;
}
int
@@ -1520,12 +1526,6 @@
xfs_flush_pages(ip, 0, -1, XFS_B_ASYNC, FI_NONE);
}
-#ifdef HAVE_REFCACHE
- /* If we are in the NFS reference cache then don't do this now */
- if (ip->i_refcache)
- return 0;
-#endif
-
if (ip->i_d.di_nlink != 0) {
if ((((ip->i_d.di_mode & S_IFMT) == S_IFREG) &&
((ip->i_size > 0) || (VN_CACHED(vp) > 0 ||
@@ -1588,9 +1588,8 @@
mp = ip->i_mount;
- if (ip->i_d.di_nlink == 0 && DM_EVENT_ENABLED(ip, DM_EVENT_DESTROY)) {
- (void) XFS_SEND_DESTROY(mp, vp, DM_RIGHT_NULL);
- }
+ if (ip->i_d.di_nlink == 0 && DM_EVENT_ENABLED(ip, DM_EVENT_DESTROY))
+ XFS_SEND_DESTROY(mp, ip, DM_RIGHT_NULL);
error = 0;
@@ -1744,11 +1743,18 @@
XFS_TRANS_MOD_DQUOT_BYINO(mp, tp, ip, XFS_TRANS_DQ_ICOUNT, -1);
/*
- * Just ignore errors at this point. There is
- * nothing we can do except to try to keep going.
+ * Just ignore errors at this point. There is nothing we can
+ * do except to try to keep going. Make sure it's not a silent
+ * error.
*/
- (void) xfs_bmap_finish(&tp, &free_list, &committed);
- (void) xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
+ error = xfs_bmap_finish(&tp, &free_list, &committed);
+ if (error)
+ xfs_fs_cmn_err(CE_NOTE, mp, "xfs_inactive: "
+ "xfs_bmap_finish() returned error %d", error);
+ error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
+ if (error)
+ xfs_fs_cmn_err(CE_NOTE, mp, "xfs_inactive: "
+ "xfs_trans_commit() returned error %d", error);
}
/*
* Release the dquots held by inode, if any.
@@ -1765,8 +1771,8 @@
int
xfs_lookup(
xfs_inode_t *dp,
- bhv_vname_t *dentry,
- bhv_vnode_t **vpp)
+ struct xfs_name *name,
+ xfs_inode_t **ipp)
{
xfs_inode_t *ip;
xfs_ino_t e_inum;
@@ -1779,9 +1785,9 @@
return XFS_ERROR(EIO);
lock_mode = xfs_ilock_map_shared(dp);
- error = xfs_dir_lookup_int(dp, lock_mode, dentry, &e_inum, &ip);
+ error = xfs_dir_lookup_int(dp, lock_mode, name, &e_inum, &ip);
if (!error) {
- *vpp = XFS_ITOV(ip);
+ *ipp = ip;
xfs_itrace_ref(ip);
}
xfs_iunlock_map_shared(dp, lock_mode);
@@ -1791,19 +1797,16 @@
int
xfs_create(
xfs_inode_t *dp,
- bhv_vname_t *dentry,
+ struct xfs_name *name,
mode_t mode,
xfs_dev_t rdev,
- bhv_vnode_t **vpp,
+ xfs_inode_t **ipp,
cred_t *credp)
{
- char *name = VNAME(dentry);
- xfs_mount_t *mp = dp->i_mount;
- bhv_vnode_t *dir_vp = XFS_ITOV(dp);
+ xfs_mount_t *mp = dp->i_mount;
xfs_inode_t *ip;
- bhv_vnode_t *vp = NULL;
xfs_trans_t *tp;
- int error;
+ int error;
xfs_bmap_free_t free_list;
xfs_fsblock_t first_block;
boolean_t unlock_dp_on_error = B_FALSE;
@@ -1813,17 +1816,14 @@
xfs_prid_t prid;
struct xfs_dquot *udqp, *gdqp;
uint resblks;
- int namelen;
- ASSERT(!*vpp);
+ ASSERT(!*ipp);
xfs_itrace_entry(dp);
- namelen = VNAMELEN(dentry);
-
if (DM_EVENT_ENABLED(dp, DM_EVENT_CREATE)) {
error = XFS_SEND_NAMESP(mp, DM_EVENT_CREATE,
- dir_vp, DM_RIGHT_NULL, NULL,
- DM_RIGHT_NULL, name, NULL,
+ dp, DM_RIGHT_NULL, NULL,
+ DM_RIGHT_NULL, name->name, NULL,
mode, 0, 0);
if (error)
@@ -1855,7 +1855,7 @@
tp = xfs_trans_alloc(mp, XFS_TRANS_CREATE);
cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
- resblks = XFS_CREATE_SPACE_RES(mp, namelen);
+ resblks = XFS_CREATE_SPACE_RES(mp, name->len);
/*
* Initially assume that the file does not exist and
* reserve the resources for that case. If that is not
@@ -1888,7 +1888,8 @@
if (error)
goto error_return;
- if (resblks == 0 && (error = xfs_dir_canenter(tp, dp, name, namelen)))
+ error = xfs_dir_canenter(tp, dp, name, resblks);
+ if (error)
goto error_return;
error = xfs_dir_ialloc(&tp, dp, mode, 1,
rdev, credp, prid, resblks > 0,
@@ -1914,11 +1915,11 @@
* the transaction cancel unlocking dp so don't do it explicitly in the
* error path.
*/
- VN_HOLD(dir_vp);
+ IHOLD(dp);
xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
unlock_dp_on_error = B_FALSE;
- error = xfs_dir_createname(tp, dp, name, namelen, ip->i_ino,
+ error = xfs_dir_createname(tp, dp, name, ip->i_ino,
&first_block, &free_list, resblks ?
resblks - XFS_IALLOC_SPACE_RES(mp) : 0);
if (error) {
@@ -1952,7 +1953,6 @@
* vnode to the caller, we bump the vnode ref count now.
*/
IHOLD(ip);
- vp = XFS_ITOV(ip);
error = xfs_bmap_finish(&tp, &free_list, &committed);
if (error) {
@@ -1970,17 +1970,17 @@
XFS_QM_DQRELE(mp, udqp);
XFS_QM_DQRELE(mp, gdqp);
- *vpp = vp;
+ *ipp = ip;
/* Fallthrough to std_return with error = 0 */
std_return:
- if ((*vpp || (error != 0 && dm_event_sent != 0)) &&
+ if ((*ipp || (error != 0 && dm_event_sent != 0)) &&
DM_EVENT_ENABLED(dp, DM_EVENT_POSTCREATE)) {
(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTCREATE,
- dir_vp, DM_RIGHT_NULL,
- *vpp ? vp:NULL,
- DM_RIGHT_NULL, name, NULL,
+ dp, DM_RIGHT_NULL,
+ *ipp ? ip : NULL,
+ DM_RIGHT_NULL, name->name, NULL,
mode, error, 0);
}
return error;
@@ -2272,46 +2272,32 @@
int
xfs_remove(
xfs_inode_t *dp,
- bhv_vname_t *dentry)
+ struct xfs_name *name,
+ xfs_inode_t *ip)
{
- bhv_vnode_t *dir_vp = XFS_ITOV(dp);
- char *name = VNAME(dentry);
xfs_mount_t *mp = dp->i_mount;
- xfs_inode_t *ip;
xfs_trans_t *tp = NULL;
int error = 0;
xfs_bmap_free_t free_list;
xfs_fsblock_t first_block;
int cancel_flags;
int committed;
- int dm_di_mode = 0;
int link_zero;
uint resblks;
- int namelen;
xfs_itrace_entry(dp);
if (XFS_FORCED_SHUTDOWN(mp))
return XFS_ERROR(EIO);
- namelen = VNAMELEN(dentry);
-
- if (!xfs_get_dir_entry(dentry, &ip)) {
- dm_di_mode = ip->i_d.di_mode;
- IRELE(ip);
- }
-
if (DM_EVENT_ENABLED(dp, DM_EVENT_REMOVE)) {
- error = XFS_SEND_NAMESP(mp, DM_EVENT_REMOVE, dir_vp,
- DM_RIGHT_NULL, NULL, DM_RIGHT_NULL,
- name, NULL, dm_di_mode, 0, 0);
+ error = XFS_SEND_NAMESP(mp, DM_EVENT_REMOVE, dp, DM_RIGHT_NULL,
+ NULL, DM_RIGHT_NULL, name->name, NULL,
+ ip->i_d.di_mode, 0, 0);
if (error)
return error;
}
- /* From this point on, return through std_return */
- ip = NULL;
-
/*
* We need to get a reference to ip before we get our log
* reservation. The reason for this is that we cannot call
@@ -2324,13 +2310,7 @@
* when we call xfs_iget. Instead we get an unlocked reference
* to the inode before getting our log reservation.
*/
- error = xfs_get_dir_entry(dentry, &ip);
- if (error) {
- REMOVE_DEBUG_TRACE(__LINE__);
- goto std_return;
- }
-
- dm_di_mode = ip->i_d.di_mode;
+ IHOLD(ip);
xfs_itrace_entry(ip);
xfs_itrace_ref(ip);
@@ -2398,7 +2378,7 @@
* Entry must exist since we did a lookup in xfs_lock_dir_and_entry.
*/
XFS_BMAP_INIT(&free_list, &first_block);
- error = xfs_dir_removename(tp, dp, name, namelen, ip->i_ino,
+ error = xfs_dir_removename(tp, dp, name, ip->i_ino,
&first_block, &free_list, 0);
if (error) {
ASSERT(error != ENOENT);
@@ -2449,14 +2429,6 @@
}
/*
- * Before we drop our extra reference to the inode, purge it
- * from the refcache if it is there. By waiting until afterwards
- * to do the IRELE, we ensure that we won't go inactive in the
- * xfs_refcache_purge_ip routine (although that would be OK).
- */
- xfs_refcache_purge_ip(ip);
-
- /*
* If we are using filestreams, kill the stream association.
* If the file is still open it may get a new one but that
* will get killed on last close in xfs_close() so we don't
@@ -2472,9 +2444,9 @@
std_return:
if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) {
(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE,
- dir_vp, DM_RIGHT_NULL,
+ dp, DM_RIGHT_NULL,
NULL, DM_RIGHT_NULL,
- name, NULL, dm_di_mode, error, 0);
+ name->name, NULL, ip->i_d.di_mode, error, 0);
}
return error;
@@ -2495,14 +2467,6 @@
cancel_flags |= XFS_TRANS_ABORT;
xfs_trans_cancel(tp, cancel_flags);
- /*
- * Before we drop our extra reference to the inode, purge it
- * from the refcache if it is there. By waiting until afterwards
- * to do the IRELE, we ensure that we won't go inactive in the
- * xfs_refcache_purge_ip routine (although that would be OK).
- */
- xfs_refcache_purge_ip(ip);
-
IRELE(ip);
goto std_return;
@@ -2511,12 +2475,10 @@
int
xfs_link(
xfs_inode_t *tdp,
- bhv_vnode_t *src_vp,
- bhv_vname_t *dentry)
+ xfs_inode_t *sip,
+ struct xfs_name *target_name)
{
- bhv_vnode_t *target_dir_vp = XFS_ITOV(tdp);
xfs_mount_t *mp = tdp->i_mount;
- xfs_inode_t *sip = xfs_vtoi(src_vp);
xfs_trans_t *tp;
xfs_inode_t *ips[2];
int error;
@@ -2525,23 +2487,20 @@
int cancel_flags;
int committed;
int resblks;
- char *target_name = VNAME(dentry);
- int target_namelen;
xfs_itrace_entry(tdp);
- xfs_itrace_entry(xfs_vtoi(src_vp));
+ xfs_itrace_entry(sip);
- target_namelen = VNAMELEN(dentry);
- ASSERT(!VN_ISDIR(src_vp));
+ ASSERT(!S_ISDIR(sip->i_d.di_mode));
if (XFS_FORCED_SHUTDOWN(mp))
return XFS_ERROR(EIO);
if (DM_EVENT_ENABLED(tdp, DM_EVENT_LINK)) {
error = XFS_SEND_NAMESP(mp, DM_EVENT_LINK,
- target_dir_vp, DM_RIGHT_NULL,
- src_vp, DM_RIGHT_NULL,
- target_name, NULL, 0, 0, 0);
+ tdp, DM_RIGHT_NULL,
+ sip, DM_RIGHT_NULL,
+ target_name->name, NULL, 0, 0, 0);
if (error)
return error;
}
@@ -2556,7 +2515,7 @@
tp = xfs_trans_alloc(mp, XFS_TRANS_LINK);
cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
- resblks = XFS_LINK_SPACE_RES(mp, target_namelen);
+ resblks = XFS_LINK_SPACE_RES(mp, target_name->len);
error = xfs_trans_reserve(tp, resblks, XFS_LINK_LOG_RES(mp), 0,
XFS_TRANS_PERM_LOG_RES, XFS_LINK_LOG_COUNT);
if (error == ENOSPC) {
@@ -2584,8 +2543,8 @@
* xfs_trans_cancel will both unlock the inodes and
* decrement the associated ref counts.
*/
- VN_HOLD(src_vp);
- VN_HOLD(target_dir_vp);
+ IHOLD(sip);
+ IHOLD(tdp);
xfs_trans_ijoin(tp, sip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, tdp, XFS_ILOCK_EXCL);
@@ -2608,15 +2567,14 @@
goto error_return;
}
- if (resblks == 0 &&
- (error = xfs_dir_canenter(tp, tdp, target_name, target_namelen)))
+ error = xfs_dir_canenter(tp, tdp, target_name, resblks);
+ if (error)
goto error_return;
XFS_BMAP_INIT(&free_list, &first_block);
- error = xfs_dir_createname(tp, tdp, target_name, target_namelen,
- sip->i_ino, &first_block, &free_list,
- resblks);
+ error = xfs_dir_createname(tp, tdp, target_name, sip->i_ino,
+ &first_block, &free_list, resblks);
if (error)
goto abort_return;
xfs_ichgtime(tdp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
@@ -2650,9 +2608,9 @@
std_return:
if (DM_EVENT_ENABLED(sip, DM_EVENT_POSTLINK)) {
(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTLINK,
- target_dir_vp, DM_RIGHT_NULL,
- src_vp, DM_RIGHT_NULL,
- target_name, NULL, 0, error, 0);
+ tdp, DM_RIGHT_NULL,
+ sip, DM_RIGHT_NULL,
+ target_name->name, NULL, 0, error, 0);
}
return error;
@@ -2669,17 +2627,13 @@
int
xfs_mkdir(
xfs_inode_t *dp,
- bhv_vname_t *dentry,
+ struct xfs_name *dir_name,
mode_t mode,
- bhv_vnode_t **vpp,
+ xfs_inode_t **ipp,
cred_t *credp)
{
- bhv_vnode_t *dir_vp = XFS_ITOV(dp);
- char *dir_name = VNAME(dentry);
- int dir_namelen = VNAMELEN(dentry);
xfs_mount_t *mp = dp->i_mount;
xfs_inode_t *cdp; /* inode of created dir */
- bhv_vnode_t *cvp; /* vnode of created dir */
xfs_trans_t *tp;
int cancel_flags;
int error;
@@ -2700,8 +2654,8 @@
if (DM_EVENT_ENABLED(dp, DM_EVENT_CREATE)) {
error = XFS_SEND_NAMESP(mp, DM_EVENT_CREATE,
- dir_vp, DM_RIGHT_NULL, NULL,
- DM_RIGHT_NULL, dir_name, NULL,
+ dp, DM_RIGHT_NULL, NULL,
+ DM_RIGHT_NULL, dir_name->name, NULL,
mode, 0, 0);
if (error)
return error;
@@ -2730,7 +2684,7 @@
tp = xfs_trans_alloc(mp, XFS_TRANS_MKDIR);
cancel_flags = XFS_TRANS_RELEASE_LOG_RES;
- resblks = XFS_MKDIR_SPACE_RES(mp, dir_namelen);
+ resblks = XFS_MKDIR_SPACE_RES(mp, dir_name->len);
error = xfs_trans_reserve(tp, resblks, XFS_MKDIR_LOG_RES(mp), 0,
XFS_TRANS_PERM_LOG_RES, XFS_MKDIR_LOG_COUNT);
if (error == ENOSPC) {
@@ -2762,8 +2716,8 @@
if (error)
goto error_return;
- if (resblks == 0 &&
- (error = xfs_dir_canenter(tp, dp, dir_name, dir_namelen)))
+ error = xfs_dir_canenter(tp, dp, dir_name, resblks);
+ if (error)
goto error_return;
/*
* create the directory inode.
@@ -2786,15 +2740,15 @@
* from here on will result in the transaction cancel
* unlocking dp so don't do it explicitly in the error path.
*/
- VN_HOLD(dir_vp);
+ IHOLD(dp);
xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
unlock_dp_on_error = B_FALSE;
XFS_BMAP_INIT(&free_list, &first_block);
- error = xfs_dir_createname(tp, dp, dir_name, dir_namelen, cdp->i_ino,
- &first_block, &free_list, resblks ?
- resblks - XFS_IALLOC_SPACE_RES(mp) : 0);
+ error = xfs_dir_createname(tp, dp, dir_name, cdp->i_ino,
+ &first_block, &free_list, resblks ?
+ resblks - XFS_IALLOC_SPACE_RES(mp) : 0);
if (error) {
ASSERT(error != ENOSPC);
goto error1;
@@ -2817,11 +2771,9 @@
if (error)
goto error2;
- cvp = XFS_ITOV(cdp);
-
created = B_TRUE;
- *vpp = cvp;
+ *ipp = cdp;
IHOLD(cdp);
/*
@@ -2858,10 +2810,10 @@
if ((created || (error != 0 && dm_event_sent != 0)) &&
DM_EVENT_ENABLED(dp, DM_EVENT_POSTCREATE)) {
(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTCREATE,
- dir_vp, DM_RIGHT_NULL,
- created ? XFS_ITOV(cdp):NULL,
+ dp, DM_RIGHT_NULL,
+ created ? cdp : NULL,
DM_RIGHT_NULL,
- dir_name, NULL,
+ dir_name->name, NULL,
mode, error, 0);
}
return error;
@@ -2885,20 +2837,17 @@
int
xfs_rmdir(
xfs_inode_t *dp,
- bhv_vname_t *dentry)
+ struct xfs_name *name,
+ xfs_inode_t *cdp)
{
bhv_vnode_t *dir_vp = XFS_ITOV(dp);
- char *name = VNAME(dentry);
- int namelen = VNAMELEN(dentry);
xfs_mount_t *mp = dp->i_mount;
- xfs_inode_t *cdp; /* child directory */
xfs_trans_t *tp;
int error;
xfs_bmap_free_t free_list;
xfs_fsblock_t first_block;
int cancel_flags;
int committed;
- int dm_di_mode = S_IFDIR;
int last_cdp_link;
uint resblks;
@@ -2907,24 +2856,15 @@
if (XFS_FORCED_SHUTDOWN(mp))
return XFS_ERROR(EIO);
- if (!xfs_get_dir_entry(dentry, &cdp)) {
- dm_di_mode = cdp->i_d.di_mode;
- IRELE(cdp);
- }
-
if (DM_EVENT_ENABLED(dp, DM_EVENT_REMOVE)) {
error = XFS_SEND_NAMESP(mp, DM_EVENT_REMOVE,
- dir_vp, DM_RIGHT_NULL,
- NULL, DM_RIGHT_NULL,
- name, NULL, dm_di_mode, 0, 0);
+ dp, DM_RIGHT_NULL,
+ NULL, DM_RIGHT_NULL, name->name,
+ NULL, cdp->i_d.di_mode, 0, 0);
if (error)
return XFS_ERROR(error);
}
- /* Return through std_return after this point. */
-
- cdp = NULL;
-
/*
* We need to get a reference to cdp before we get our log
* reservation. The reason for this is that we cannot call
@@ -2937,13 +2877,7 @@
* when we call xfs_iget. Instead we get an unlocked reference
* to the inode before getting our log reservation.
*/
- error = xfs_get_dir_entry(dentry, &cdp);
- if (error) {
- REMOVE_DEBUG_TRACE(__LINE__);
- goto std_return;
- }
- mp = dp->i_mount;
- dm_di_mode = cdp->i_d.di_mode;
+ IHOLD(cdp);
/*
* Get the dquots for the inodes.
@@ -3020,7 +2954,7 @@
goto error_return;
}
- error = xfs_dir_removename(tp, dp, name, namelen, cdp->i_ino,
+ error = xfs_dir_removename(tp, dp, name, cdp->i_ino,
&first_block, &free_list, resblks);
if (error)
goto error1;
@@ -3098,9 +3032,9 @@
std_return:
if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) {
(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE,
- dir_vp, DM_RIGHT_NULL,
+ dp, DM_RIGHT_NULL,
NULL, DM_RIGHT_NULL,
- name, NULL, dm_di_mode,
+ name->name, NULL, cdp->i_d.di_mode,
error, 0);
}
return error;
@@ -3118,13 +3052,12 @@
int
xfs_symlink(
xfs_inode_t *dp,
- bhv_vname_t *dentry,
- char *target_path,
+ struct xfs_name *link_name,
+ const char *target_path,
mode_t mode,
- bhv_vnode_t **vpp,
+ xfs_inode_t **ipp,
cred_t *credp)
{
- bhv_vnode_t *dir_vp = XFS_ITOV(dp);
xfs_mount_t *mp = dp->i_mount;
xfs_trans_t *tp;
xfs_inode_t *ip;
@@ -3140,17 +3073,15 @@
int nmaps;
xfs_bmbt_irec_t mval[SYMLINK_MAPS];
xfs_daddr_t d;
- char *cur_chunk;
+ const char *cur_chunk;
int byte_cnt;
int n;
xfs_buf_t *bp;
xfs_prid_t prid;
struct xfs_dquot *udqp, *gdqp;
uint resblks;
- char *link_name = VNAME(dentry);
- int link_namelen;
- *vpp = NULL;
+ *ipp = NULL;
error = 0;
ip = NULL;
tp = NULL;
@@ -3160,44 +3091,17 @@
if (XFS_FORCED_SHUTDOWN(mp))
return XFS_ERROR(EIO);
- link_namelen = VNAMELEN(dentry);
-
/*
* Check component lengths of the target path name.
*/
pathlen = strlen(target_path);
if (pathlen >= MAXPATHLEN) /* total string too long */
return XFS_ERROR(ENAMETOOLONG);
- if (pathlen >= MAXNAMELEN) { /* is any component too long? */
- int len, total;
- char *path;
-
- for (total = 0, path = target_path; total < pathlen;) {
- /*
- * Skip any slashes.
- */
- while(*path == '/') {
- total++;
- path++;
- }
-
- /*
- * Count up to the next slash or end of path.
- * Error out if the component is bigger than MAXNAMELEN.
- */
- for(len = 0; *path != '/' && total < pathlen;total++, path++) {
- if (++len >= MAXNAMELEN) {
- error = ENAMETOOLONG;
- return error;
- }
- }
- }
- }
if (DM_EVENT_ENABLED(dp, DM_EVENT_SYMLINK)) {
- error = XFS_SEND_NAMESP(mp, DM_EVENT_SYMLINK, dir_vp,
+ error = XFS_SEND_NAMESP(mp, DM_EVENT_SYMLINK, dp,
DM_RIGHT_NULL, NULL, DM_RIGHT_NULL,
- link_name, target_path, 0, 0, 0);
+ link_name->name, target_path, 0, 0, 0);
if (error)
return error;
}
@@ -3229,7 +3133,7 @@
fs_blocks = 0;
else
fs_blocks = XFS_B_TO_FSB(mp, pathlen);
- resblks = XFS_SYMLINK_SPACE_RES(mp, link_namelen, fs_blocks);
+ resblks = XFS_SYMLINK_SPACE_RES(mp, link_name->len, fs_blocks);
error = xfs_trans_reserve(tp, resblks, XFS_SYMLINK_LOG_RES(mp), 0,
XFS_TRANS_PERM_LOG_RES, XFS_SYMLINK_LOG_COUNT);
if (error == ENOSPC && fs_blocks == 0) {
@@ -3263,8 +3167,8 @@
/*
* Check for ability to enter directory entry, if no space reserved.
*/
- if (resblks == 0 &&
- (error = xfs_dir_canenter(tp, dp, link_name, link_namelen)))
+ error = xfs_dir_canenter(tp, dp, link_name, resblks);
+ if (error)
goto error_return;
/*
* Initialize the bmap freelist prior to calling either
@@ -3289,7 +3193,7 @@
* transaction cancel unlocking dp so don't do it explicitly in the
* error path.
*/
- VN_HOLD(dir_vp);
+ IHOLD(dp);
xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL);
unlock_dp_on_error = B_FALSE;
@@ -3356,8 +3260,8 @@
/*
* Create the directory entry for the symlink.
*/
- error = xfs_dir_createname(tp, dp, link_name, link_namelen, ip->i_ino,
- &first_block, &free_list, resblks);
+ error = xfs_dir_createname(tp, dp, link_name, ip->i_ino,
+ &first_block, &free_list, resblks);
if (error)
goto error1;
xfs_ichgtime(dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
@@ -3399,19 +3303,14 @@
std_return:
if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTSYMLINK)) {
(void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTSYMLINK,
- dir_vp, DM_RIGHT_NULL,
- error ? NULL : XFS_ITOV(ip),
- DM_RIGHT_NULL, link_name, target_path,
- 0, error, 0);
+ dp, DM_RIGHT_NULL,
+ error ? NULL : ip,
+ DM_RIGHT_NULL, link_name->name,
+ target_path, 0, error, 0);
}
- if (!error) {
- bhv_vnode_t *vp;
-
- ASSERT(ip);
- vp = XFS_ITOV(ip);
- *vpp = vp;
- }
+ if (!error)
+ *ipp = ip;
return error;
error2:
@@ -3431,60 +3330,11 @@
}
int
-xfs_rwlock(
- xfs_inode_t *ip,
- bhv_vrwlock_t locktype)
-{
- if (S_ISDIR(ip->i_d.di_mode))
- return 1;
- if (locktype == VRWLOCK_WRITE) {
- xfs_ilock(ip, XFS_IOLOCK_EXCL);
- } else if (locktype == VRWLOCK_TRY_READ) {
- return xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED);
- } else if (locktype == VRWLOCK_TRY_WRITE) {
- return xfs_ilock_nowait(ip, XFS_IOLOCK_EXCL);
- } else {
- ASSERT((locktype == VRWLOCK_READ) ||
- (locktype == VRWLOCK_WRITE_DIRECT));
- xfs_ilock(ip, XFS_IOLOCK_SHARED);
- }
-
- return 1;
-}
-
-
-void
-xfs_rwunlock(
- xfs_inode_t *ip,
- bhv_vrwlock_t locktype)
-{
- if (S_ISDIR(ip->i_d.di_mode))
- return;
- if (locktype == VRWLOCK_WRITE) {
- /*
- * In the write case, we may have added a new entry to
- * the reference cache. This might store a pointer to
- * an inode to be released in this inode. If it is there,
- * clear the pointer and release the inode after unlocking
- * this one.
- */
- xfs_refcache_iunlock(ip, XFS_IOLOCK_EXCL);
- } else {
- ASSERT((locktype == VRWLOCK_READ) ||
- (locktype == VRWLOCK_WRITE_DIRECT));
- xfs_iunlock(ip, XFS_IOLOCK_SHARED);
- }
- return;
-}
-
-
-int
xfs_inode_flush(
xfs_inode_t *ip,
int flags)
{
xfs_mount_t *mp = ip->i_mount;
- xfs_inode_log_item_t *iip = ip->i_itemp;
int error = 0;
if (XFS_FORCED_SHUTDOWN(mp))
@@ -3494,33 +3344,9 @@
* Bypass inodes which have already been cleaned by
* the inode flush clustering code inside xfs_iflush
*/
- if ((ip->i_update_core == 0) &&
- ((iip == NULL) || !(iip->ili_format.ilf_fields & XFS_ILOG_ALL)))
+ if (xfs_inode_clean(ip))
return 0;
- if (flags & FLUSH_LOG) {
- if (iip && iip->ili_last_lsn) {
- xlog_t *log = mp->m_log;
- xfs_lsn_t sync_lsn;
- int log_flags = XFS_LOG_FORCE;
-
- spin_lock(&log->l_grant_lock);
- sync_lsn = log->l_last_sync_lsn;
- spin_unlock(&log->l_grant_lock);
-
- if ((XFS_LSN_CMP(iip->ili_last_lsn, sync_lsn) > 0)) {
- if (flags & FLUSH_SYNC)
- log_flags |= XFS_LOG_SYNC;
- error = xfs_log_force(mp, iip->ili_last_lsn, log_flags);
- if (error)
- return error;
- }
-
- if (ip->i_update_core == 0)
- return 0;
- }
- }
-
/*
* We make this non-blocking if the inode is contended,
* return EAGAIN to indicate to the caller that they
@@ -3528,30 +3354,22 @@
* blocking on inodes inside another operation right
* now, they get caught later by xfs_sync.
*/
- if (flags & FLUSH_INODE) {
- int flush_flags;
-
- if (flags & FLUSH_SYNC) {
- xfs_ilock(ip, XFS_ILOCK_SHARED);
- xfs_iflock(ip);
- } else if (xfs_ilock_nowait(ip, XFS_ILOCK_SHARED)) {
- if (xfs_ipincount(ip) || !xfs_iflock_nowait(ip)) {
- xfs_iunlock(ip, XFS_ILOCK_SHARED);
- return EAGAIN;
- }
- } else {
+ if (flags & FLUSH_SYNC) {
+ xfs_ilock(ip, XFS_ILOCK_SHARED);
+ xfs_iflock(ip);
+ } else if (xfs_ilock_nowait(ip, XFS_ILOCK_SHARED)) {
+ if (xfs_ipincount(ip) || !xfs_iflock_nowait(ip)) {
+ xfs_iunlock(ip, XFS_ILOCK_SHARED);
return EAGAIN;
}
-
- if (flags & FLUSH_SYNC)
- flush_flags = XFS_IFLUSH_SYNC;
- else
- flush_flags = XFS_IFLUSH_ASYNC;
-
- error = xfs_iflush(ip, flush_flags);
- xfs_iunlock(ip, XFS_ILOCK_SHARED);
+ } else {
+ return EAGAIN;
}
+ error = xfs_iflush(ip, (flags & FLUSH_SYNC) ? XFS_IFLUSH_SYNC
+ : XFS_IFLUSH_ASYNC_NOBLOCK);
+ xfs_iunlock(ip, XFS_ILOCK_SHARED);
+
return error;
}
@@ -3694,12 +3512,12 @@
* We get the flush lock regardless, though, just to make sure
* we don't free it while it is being flushed.
*/
- if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
- if (!locked) {
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- xfs_iflock(ip);
- }
+ if (!locked) {
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+ xfs_iflock(ip);
+ }
+ if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
if (ip->i_update_core ||
((ip->i_itemp != NULL) &&
(ip->i_itemp->ili_format.ilf_fields != 0))) {
@@ -3719,17 +3537,11 @@
ASSERT(ip->i_update_core == 0);
ASSERT(ip->i_itemp == NULL ||
ip->i_itemp->ili_format.ilf_fields == 0);
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- } else if (locked) {
- /*
- * We are not interested in doing an iflush if we're
- * in the process of shutting down the filesystem forcibly.
- * So, just reclaim the inode.
- */
- xfs_ifunlock(ip);
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
}
+ xfs_ifunlock(ip);
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+
reclaim:
xfs_ireclaim(ip);
return 0;
@@ -3845,9 +3657,8 @@
end_dmi_offset = offset+len;
if (end_dmi_offset > ip->i_size)
end_dmi_offset = ip->i_size;
- error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, XFS_ITOV(ip),
- offset, end_dmi_offset - offset,
- 0, NULL);
+ error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, ip, offset,
+ end_dmi_offset - offset, 0, NULL);
if (error)
return error;
}
@@ -3956,8 +3767,8 @@
if (error == ENOSPC && (attr_flags & ATTR_DMI) == 0 &&
DM_EVENT_ENABLED(ip, DM_EVENT_NOSPACE)) {
error = XFS_SEND_NAMESP(mp, DM_EVENT_NOSPACE,
- XFS_ITOV(ip), DM_RIGHT_NULL,
- XFS_ITOV(ip), DM_RIGHT_NULL,
+ ip, DM_RIGHT_NULL,
+ ip, DM_RIGHT_NULL,
NULL, NULL, 0, 0, 0); /* Delay flag intentionally unused */
if (error == 0)
goto retry; /* Maybe DMAPI app. has made space */
@@ -4021,7 +3832,8 @@
XFS_BUF_READ(bp);
XFS_BUF_SET_ADDR(bp, XFS_FSB_TO_DB(ip, imap.br_startblock));
xfsbdstrat(mp, bp);
- if ((error = xfs_iowait(bp))) {
+ error = xfs_iowait(bp);
+ if (error) {
xfs_ioerror_alert("xfs_zero_remaining_bytes(read)",
mp, bp, XFS_BUF_ADDR(bp));
break;
@@ -4033,7 +3845,8 @@
XFS_BUF_UNREAD(bp);
XFS_BUF_WRITE(bp);
xfsbdstrat(mp, bp);
- if ((error = xfs_iowait(bp))) {
+ error = xfs_iowait(bp);
+ if (error) {
xfs_ioerror_alert("xfs_zero_remaining_bytes(write)",
mp, bp, XFS_BUF_ADDR(bp));
break;
@@ -4102,7 +3915,7 @@
DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) {
if (end_dmi_offset > ip->i_size)
end_dmi_offset = ip->i_size;
- error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, vp,
+ error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, ip,
offset, end_dmi_offset - offset,
AT_DELAY_FLAG(attr_flags), NULL);
if (error)
@@ -4132,7 +3945,7 @@
* actually need to zero the extent edges. Otherwise xfs_bunmapi
* will take care of it for us.
*/
- if (rt && !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+ if (rt && !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
nimap = 1;
error = xfs_bmapi(NULL, ip, startoffset_fsb,
1, 0, NULL, 0, &imap, &nimap, NULL, NULL);
diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h
index 4e3970f..24c5392 100644
--- a/fs/xfs/xfs_vnodeops.h
+++ b/fs/xfs/xfs_vnodeops.h
@@ -23,31 +23,32 @@
xfs_off_t stop);
int xfs_release(struct xfs_inode *ip);
int xfs_inactive(struct xfs_inode *ip);
-int xfs_lookup(struct xfs_inode *dp, bhv_vname_t *dentry,
- bhv_vnode_t **vpp);
-int xfs_create(struct xfs_inode *dp, bhv_vname_t *dentry, mode_t mode,
- xfs_dev_t rdev, bhv_vnode_t **vpp, struct cred *credp);
-int xfs_remove(struct xfs_inode *dp, bhv_vname_t *dentry);
-int xfs_link(struct xfs_inode *tdp, bhv_vnode_t *src_vp,
- bhv_vname_t *dentry);
-int xfs_mkdir(struct xfs_inode *dp, bhv_vname_t *dentry,
- mode_t mode, bhv_vnode_t **vpp, struct cred *credp);
-int xfs_rmdir(struct xfs_inode *dp, bhv_vname_t *dentry);
+int xfs_lookup(struct xfs_inode *dp, struct xfs_name *name,
+ struct xfs_inode **ipp);
+int xfs_create(struct xfs_inode *dp, struct xfs_name *name, mode_t mode,
+ xfs_dev_t rdev, struct xfs_inode **ipp, struct cred *credp);
+int xfs_remove(struct xfs_inode *dp, struct xfs_name *name,
+ struct xfs_inode *ip);
+int xfs_link(struct xfs_inode *tdp, struct xfs_inode *sip,
+ struct xfs_name *target_name);
+int xfs_mkdir(struct xfs_inode *dp, struct xfs_name *dir_name,
+ mode_t mode, struct xfs_inode **ipp, struct cred *credp);
+int xfs_rmdir(struct xfs_inode *dp, struct xfs_name *name,
+ struct xfs_inode *cdp);
int xfs_readdir(struct xfs_inode *dp, void *dirent, size_t bufsize,
xfs_off_t *offset, filldir_t filldir);
-int xfs_symlink(struct xfs_inode *dp, bhv_vname_t *dentry,
- char *target_path, mode_t mode, bhv_vnode_t **vpp,
+int xfs_symlink(struct xfs_inode *dp, struct xfs_name *link_name,
+ const char *target_path, mode_t mode, struct xfs_inode **ipp,
struct cred *credp);
-int xfs_rwlock(struct xfs_inode *ip, bhv_vrwlock_t locktype);
-void xfs_rwunlock(struct xfs_inode *ip, bhv_vrwlock_t locktype);
int xfs_inode_flush(struct xfs_inode *ip, int flags);
int xfs_set_dmattrs(struct xfs_inode *ip, u_int evmask, u_int16_t state);
int xfs_reclaim(struct xfs_inode *ip);
int xfs_change_file_space(struct xfs_inode *ip, int cmd,
xfs_flock64_t *bf, xfs_off_t offset,
struct cred *credp, int attr_flags);
-int xfs_rename(struct xfs_inode *src_dp, bhv_vname_t *src_vname,
- bhv_vnode_t *target_dir_vp, bhv_vname_t *target_vname);
+int xfs_rename(struct xfs_inode *src_dp, struct xfs_name *src_name,
+ struct xfs_inode *src_ip, struct xfs_inode *target_dp,
+ struct xfs_name *target_name);
int xfs_attr_get(struct xfs_inode *ip, const char *name, char *value,
int *valuelenp, int flags, cred_t *cred);
int xfs_attr_set(struct xfs_inode *dp, const char *name, char *value,
diff --git a/include/asm-alpha/current.h b/include/asm-alpha/current.h
index 8d88a13..094d285 100644
--- a/include/asm-alpha/current.h
+++ b/include/asm-alpha/current.h
@@ -3,7 +3,7 @@
#include <linux/thread_info.h>
-#define get_current() (current_thread_info()->task + 0)
+#define get_current() (current_thread_info()->task)
#define current get_current()
#endif /* _ALPHA_CURRENT_H */
diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h
index 75a1aff..db351d1 100644
--- a/include/asm-alpha/dma-mapping.h
+++ b/include/asm-alpha/dma-mapping.h
@@ -11,7 +11,7 @@
#define dma_unmap_single(dev, addr, size, dir) \
pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
#define dma_alloc_coherent(dev, size, addr, gfp) \
- pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr)
+ __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp)
#define dma_free_coherent(dev, size, va, addr) \
pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
#define dma_map_page(dev, page, off, size, dir) \
diff --git a/include/asm-alpha/ide.h b/include/asm-alpha/ide.h
index b7bf68d..f44129a 100644
--- a/include/asm-alpha/ide.h
+++ b/include/asm-alpha/ide.h
@@ -13,9 +13,6 @@
#ifdef __KERNEL__
-
-#define IDE_ARCH_OBSOLETE_DEFAULTS
-
static inline int ide_default_irq(unsigned long base)
{
switch (base) {
@@ -40,14 +37,6 @@
}
}
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
-#ifdef CONFIG_PCI
-#define ide_init_default_irq(base) (0)
-#else
-#define ide_init_default_irq(base) ide_default_irq(base)
-#endif
-
#include <asm-generic/ide_iops.h>
#endif /* __KERNEL__ */
diff --git a/include/asm-alpha/kvm.h b/include/asm-alpha/kvm.h
new file mode 100644
index 0000000..b9daec4
--- /dev/null
+++ b/include/asm-alpha/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_ALPHA_H
+#define __LINUX_KVM_ALPHA_H
+
+/* alpha does not support KVM */
+
+#endif
diff --git a/include/asm-alpha/pci.h b/include/asm-alpha/pci.h
index d5b10ef..d31fd49 100644
--- a/include/asm-alpha/pci.h
+++ b/include/asm-alpha/pci.h
@@ -76,7 +76,13 @@
successful and sets *DMA_ADDRP to the pci side dma address as well,
else DMA_ADDRP is undefined. */
-extern void *pci_alloc_consistent(struct pci_dev *, size_t, dma_addr_t *);
+extern void *__pci_alloc_consistent(struct pci_dev *, size_t,
+ dma_addr_t *, gfp_t);
+static inline void *
+pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma)
+{
+ return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC);
+}
/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must
be values that were returned from pci_alloc_consistent. SIZE must
diff --git a/include/asm-alpha/semaphore.h b/include/asm-alpha/semaphore.h
index f1e9278..d9b2034 100644
--- a/include/asm-alpha/semaphore.h
+++ b/include/asm-alpha/semaphore.h
@@ -1,149 +1 @@
-#ifndef _ALPHA_SEMAPHORE_H
-#define _ALPHA_SEMAPHORE_H
-
-/*
- * SMP- and interrupt-safe semaphores..
- *
- * (C) Copyright 1996 Linus Torvalds
- * (C) Copyright 1996, 2000 Richard Henderson
- */
-
-#include <asm/current.h>
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <linux/compiler.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-struct semaphore {
- atomic_t count;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait), \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init(struct semaphore *sem, int val)
-{
- /*
- * Logically,
- * *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
- * except that gcc produces better initializing by parts yet.
- */
-
- atomic_set(&sem->count, val);
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-extern void down(struct semaphore *);
-extern void __down_failed(struct semaphore *);
-extern int down_interruptible(struct semaphore *);
-extern int __down_failed_interruptible(struct semaphore *);
-extern int down_trylock(struct semaphore *);
-extern void up(struct semaphore *);
-extern void __up_wakeup(struct semaphore *);
-
-/*
- * Hidden out of line code is fun, but extremely messy. Rely on newer
- * compilers to do a respectable job with this. The contention cases
- * are handled out of line in arch/alpha/kernel/semaphore.c.
- */
-
-static inline void __down(struct semaphore *sem)
-{
- long count;
- might_sleep();
- count = atomic_dec_return(&sem->count);
- if (unlikely(count < 0))
- __down_failed(sem);
-}
-
-static inline int __down_interruptible(struct semaphore *sem)
-{
- long count;
- might_sleep();
- count = atomic_dec_return(&sem->count);
- if (unlikely(count < 0))
- return __down_failed_interruptible(sem);
- return 0;
-}
-
-/*
- * down_trylock returns 0 on success, 1 if we failed to get the lock.
- */
-
-static inline int __down_trylock(struct semaphore *sem)
-{
- long ret;
-
- /* "Equivalent" C:
-
- do {
- ret = ldl_l;
- --ret;
- if (ret < 0)
- break;
- ret = stl_c = ret;
- } while (ret == 0);
- */
- __asm__ __volatile__(
- "1: ldl_l %0,%1\n"
- " subl %0,1,%0\n"
- " blt %0,2f\n"
- " stl_c %0,%1\n"
- " beq %0,3f\n"
- " mb\n"
- "2:\n"
- ".subsection 2\n"
- "3: br 1b\n"
- ".previous"
- : "=&r" (ret), "=m" (sem->count)
- : "m" (sem->count));
-
- return ret < 0;
-}
-
-static inline void __up(struct semaphore *sem)
-{
- if (unlikely(atomic_inc_return(&sem->count) <= 0))
- __up_wakeup(sem);
-}
-
-#if !defined(CONFIG_DEBUG_SEMAPHORE)
-extern inline void down(struct semaphore *sem)
-{
- __down(sem);
-}
-extern inline int down_interruptible(struct semaphore *sem)
-{
- return __down_interruptible(sem);
-}
-extern inline int down_trylock(struct semaphore *sem)
-{
- return __down_trylock(sem);
-}
-extern inline void up(struct semaphore *sem)
-{
- __up(sem);
-}
-#endif
-
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h
index efd9a5e..90d14ee 100644
--- a/include/asm-arm/arch-iop13xx/adma.h
+++ b/include/asm-arm/arch-iop13xx/adma.h
@@ -454,11 +454,6 @@
__raw_writel(adma_accr, ADMA_ACCR(chan));
}
-static inline void iop_chan_idle(int busy, struct iop_adma_chan *chan)
-{
- do { } while (0);
-}
-
static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
{
return __raw_readl(ADMA_ACSR(chan));
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
index 7ca0ed9..352d338 100644
--- a/include/asm-arm/arch-s3c2410/spi.h
+++ b/include/asm-arm/arch-s3c2410/spi.h
@@ -15,6 +15,7 @@
struct s3c2410_spi_info {
unsigned long pin_cs; /* simple gpio cs */
+ unsigned int num_cs; /* total chipselects */
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/include/asm-arm/hardware/iop3xx-adma.h
index 5c529e6..84d635b 100644
--- a/include/asm-arm/hardware/iop3xx-adma.h
+++ b/include/asm-arm/hardware/iop3xx-adma.h
@@ -767,20 +767,12 @@
static inline void iop_chan_append(struct iop_adma_chan *chan)
{
u32 dma_chan_ctrl;
- /* workaround dropped interrupts on 3xx */
- mod_timer(&chan->cleanup_watchdog, jiffies + msecs_to_jiffies(3));
dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
dma_chan_ctrl |= 0x2;
__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
}
-static inline void iop_chan_idle(int busy, struct iop_adma_chan *chan)
-{
- if (!busy)
- del_timer(&chan->cleanup_watchdog);
-}
-
static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
{
return __raw_readl(DMA_CSR(chan));
diff --git a/include/asm-arm/hardware/iop_adma.h b/include/asm-arm/hardware/iop_adma.h
index ca8e71f..cb7e361 100644
--- a/include/asm-arm/hardware/iop_adma.h
+++ b/include/asm-arm/hardware/iop_adma.h
@@ -51,7 +51,6 @@
* @common: common dmaengine channel object members
* @last_used: place holder for allocation to continue from where it left off
* @all_slots: complete domain of slots usable by the channel
- * @cleanup_watchdog: workaround missed interrupts on iop3xx
* @slots_allocated: records the actual size of the descriptor slot pool
* @irq_tasklet: bottom half where iop_adma_slot_cleanup runs
*/
@@ -65,7 +64,6 @@
struct dma_chan common;
struct iop_adma_desc_slot *last_used;
struct list_head all_slots;
- struct timer_list cleanup_watchdog;
int slots_allocated;
struct tasklet_struct irq_tasklet;
};
diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h
index f348fcf..88f4d23 100644
--- a/include/asm-arm/ide.h
+++ b/include/asm-arm/ide.h
@@ -17,14 +17,6 @@
#define MAX_HWIFS 4
#endif
-#if !defined(CONFIG_ARCH_L7200)
-# ifdef CONFIG_ARCH_CLPS7500
-# define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-# else
-# define ide_default_io_ctl(base) (0)
-# endif
-#endif /* !ARCH_L7200 */
-
#define __ide_mm_insw(port,addr,len) readsw(port,addr,len)
#define __ide_mm_insl(port,addr,len) readsl(port,addr,len)
#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len)
diff --git a/include/asm-arm/kvm.h b/include/asm-arm/kvm.h
new file mode 100644
index 0000000..cb3c08c
--- /dev/null
+++ b/include/asm-arm/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_ARM_H
+#define __LINUX_KVM_ARM_H
+
+/* arm does not support KVM */
+
+#endif
diff --git a/include/asm-arm/semaphore-helper.h b/include/asm-arm/semaphore-helper.h
deleted file mode 100644
index 1d7f198..0000000
--- a/include/asm-arm/semaphore-helper.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef ASMARM_SEMAPHORE_HELPER_H
-#define ASMARM_SEMAPHORE_HELPER_H
-
-/*
- * These two _must_ execute atomically wrt each other.
- */
-static inline void wake_one_more(struct semaphore * sem)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (atomic_read(&sem->count) <= 0)
- sem->waking++;
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-}
-
-static inline int waking_non_zero(struct semaphore *sem)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->waking > 0) {
- sem->waking--;
- ret = 1;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking non zero interruptible
- * 1 got the lock
- * 0 go to sleep
- * -EINTR interrupted
- *
- * We must undo the sem->count down_interruptible() increment while we are
- * protected by the spinlock in order to make this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-static inline int waking_non_zero_interruptible(struct semaphore *sem,
- struct task_struct *tsk)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->waking > 0) {
- sem->waking--;
- ret = 1;
- } else if (signal_pending(tsk)) {
- atomic_inc(&sem->count);
- ret = -EINTR;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_try_lock:
- * 1 failed to lock
- * 0 got the lock
- *
- * We must undo the sem->count down_interruptible() increment while we are
- * protected by the spinlock in order to make this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-static inline int waking_non_zero_trylock(struct semaphore *sem)
-{
- unsigned long flags;
- int ret = 1;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->waking <= 0)
- atomic_inc(&sem->count);
- else {
- sem->waking--;
- ret = 0;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-#endif
diff --git a/include/asm-arm/semaphore.h b/include/asm-arm/semaphore.h
index 1c8b441..d9b2034 100644
--- a/include/asm-arm/semaphore.h
+++ b/include/asm-arm/semaphore.h
@@ -1,98 +1 @@
-/*
- * linux/include/asm-arm/semaphore.h
- */
-#ifndef __ASM_ARM_SEMAPHORE_H
-#define __ASM_ARM_SEMAPHORE_H
-
-#include <linux/linkage.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-#include <asm/atomic.h>
-#include <asm/locks.h>
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INIT(name, cnt) \
-{ \
- .count = ATOMIC_INIT(cnt), \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait), \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INIT(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init(struct semaphore *sem, int val)
-{
- atomic_set(&sem->count, val);
- sem->sleepers = 0;
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX(struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED(struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-/*
- * special register calling convention
- */
-asmlinkage void __down_failed(void);
-asmlinkage int __down_interruptible_failed(void);
-asmlinkage int __down_trylock_failed(void);
-asmlinkage void __up_wakeup(void);
-
-extern void __down(struct semaphore * sem);
-extern int __down_interruptible(struct semaphore * sem);
-extern int __down_trylock(struct semaphore * sem);
-extern void __up(struct semaphore * sem);
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "__down" is the actual routine that waits...
- */
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
- __down_op(sem, __down_failed);
-}
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "__down_interruptible" is the actual routine that waits...
- */
-static inline int down_interruptible (struct semaphore * sem)
-{
- might_sleep();
- return __down_op_ret(sem, __down_interruptible_failed);
-}
-
-static inline int down_trylock(struct semaphore *sem)
-{
- return __down_op_ret(sem, __down_trylock_failed);
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore * sem)
-{
- __up_op(sem, __up_wakeup);
-}
-
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-avr32/kvm.h b/include/asm-avr32/kvm.h
new file mode 100644
index 0000000..8c57770
--- /dev/null
+++ b/include/asm-avr32/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_AVR32_H
+#define __LINUX_KVM_AVR32_H
+
+/* avr32 does not support KVM */
+
+#endif
diff --git a/include/asm-avr32/semaphore.h b/include/asm-avr32/semaphore.h
index feaf1d4..d9b2034 100644
--- a/include/asm-avr32/semaphore.h
+++ b/include/asm-avr32/semaphore.h
@@ -1,108 +1 @@
-/*
- * SMP- and interrupt-safe semaphores.
- *
- * Copyright (C) 2006 Atmel Corporation
- *
- * Based on include/asm-i386/semaphore.h
- * Copyright (C) 1996 Linus Torvalds
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_SEMAPHORE_H
-#define __ASM_AVR32_SEMAPHORE_H
-
-#include <linux/linkage.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- atomic_set(&sem->count, val);
- sem->sleepers = 0;
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-void __down(struct semaphore * sem);
-int __down_interruptible(struct semaphore * sem);
-void __up(struct semaphore * sem);
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "__down_failed" is a special asm handler that calls the C
- * routine that actually waits. See arch/i386/kernel/semaphore.c
- */
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
- if (unlikely(atomic_dec_return (&sem->count) < 0))
- __down (sem);
-}
-
-/*
- * Interruptible try to acquire a semaphore. If we obtained
- * it, return zero. If we were interrupted, returns -EINTR
- */
-static inline int down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
-
- might_sleep();
- if (unlikely(atomic_dec_return (&sem->count) < 0))
- ret = __down_interruptible (sem);
- return ret;
-}
-
-/*
- * Non-blockingly attempt to down() a semaphore.
- * Returns zero if we acquired it
- */
-static inline int down_trylock(struct semaphore * sem)
-{
- return atomic_dec_if_positive(&sem->count) < 0;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore * sem)
-{
- if (unlikely(atomic_inc_return (&sem->count) <= 0))
- __up (sem);
-}
-
-#endif /*__ASM_AVR32_SEMAPHORE_H */
+#include <linux/semaphore.h>
diff --git a/include/asm-blackfin/ide.h b/include/asm-blackfin/ide.h
index 121e272..5b88de1 100644
--- a/include/asm-blackfin/ide.h
+++ b/include/asm-blackfin/ide.h
@@ -19,10 +19,6 @@
#define MAX_HWIFS 1
-/* Legacy ... BLK_DEV_IDECS */
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
-
#include <asm-generic/ide_iops.h>
/****************************************************************************/
diff --git a/include/asm-blackfin/kvm.h b/include/asm-blackfin/kvm.h
new file mode 100644
index 0000000..e3477d7
--- /dev/null
+++ b/include/asm-blackfin/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_BLACKFIN_H
+#define __LINUX_KVM_BLACKFIN_H
+
+/* blackfin does not support KVM */
+
+#endif
diff --git a/include/asm-blackfin/semaphore-helper.h b/include/asm-blackfin/semaphore-helper.h
deleted file mode 100644
index 9082b0d..0000000
--- a/include/asm-blackfin/semaphore-helper.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* Based on M68K version, Lineo Inc. May 2001 */
-
-#ifndef _BFIN_SEMAPHORE_HELPER_H
-#define _BFIN_SEMAPHORE_HELPER_H
-
-/*
- * SMP- and interrupt-safe semaphores helper functions.
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- */
-
-#include <asm/errno.h>
-
-/*
- * These two _must_ execute atomically wrt each other.
- */
-static inline void wake_one_more(struct semaphore *sem)
-{
- atomic_inc(&sem->waking);
-}
-
-static inline int waking_non_zero(struct semaphore *sem)
-{
- int ret;
- unsigned long flags = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 0;
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 1;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_interruptible:
- * 1 got the lock
- * 0 go to sleep
- * -EINTR interrupted
- */
-static inline int waking_non_zero_interruptible(struct semaphore *sem,
- struct task_struct *tsk)
-{
- int ret = 0;
- unsigned long flags = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 1;
- } else if (signal_pending(tsk)) {
- atomic_inc(&sem->count);
- ret = -EINTR;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_trylock:
- * 1 failed to lock
- * 0 got the lock
- */
-static inline int waking_non_zero_trylock(struct semaphore *sem)
-{
- int ret = 1;
- unsigned long flags = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 0;
- } else
- atomic_inc(&sem->count);
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-#endif /* _BFIN_SEMAPHORE_HELPER_H */
diff --git a/include/asm-blackfin/semaphore.h b/include/asm-blackfin/semaphore.h
index 533f90f..d9b2034 100644
--- a/include/asm-blackfin/semaphore.h
+++ b/include/asm-blackfin/semaphore.h
@@ -1,105 +1 @@
-#ifndef _BFIN_SEMAPHORE_H
-#define _BFIN_SEMAPHORE_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
-#include <asm/atomic.h>
-
-/*
- * Interrupt-safe semaphores..
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * BFIN version by akbar hussain Lineo Inc April 2001
- *
- */
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .sleepers = 0, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init(struct semaphore *sem, int val)
-{
- *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
-}
-
-static inline void init_MUTEX(struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED(struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-asmlinkage void __down(struct semaphore *sem);
-asmlinkage int __down_interruptible(struct semaphore *sem);
-asmlinkage int __down_trylock(struct semaphore *sem);
-asmlinkage void __up(struct semaphore *sem);
-
-extern spinlock_t semaphore_wake_lock;
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "down_failed" is a special asm handler that calls the C
- * routine that actually waits.
- */
-static inline void down(struct semaphore *sem)
-{
- might_sleep();
- if (atomic_dec_return(&sem->count) < 0)
- __down(sem);
-}
-
-static inline int down_interruptible(struct semaphore *sem)
-{
- int ret = 0;
-
- might_sleep();
- if (atomic_dec_return(&sem->count) < 0)
- ret = __down_interruptible(sem);
- return (ret);
-}
-
-static inline int down_trylock(struct semaphore *sem)
-{
- int ret = 0;
-
- if (atomic_dec_return(&sem->count) < 0)
- ret = __down_trylock(sem);
- return ret;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore *sem)
-{
- if (atomic_inc_return(&sem->count) <= 0)
- __up(sem);
-}
-
-#endif /* __ASSEMBLY__ */
-#endif /* _BFIN_SEMAPHORE_H */
+#include <linux/semaphore.h>
diff --git a/include/asm-cris/kvm.h b/include/asm-cris/kvm.h
new file mode 100644
index 0000000..c860f51
--- /dev/null
+++ b/include/asm-cris/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_CRIS_H
+#define __LINUX_KVM_CRIS_H
+
+/* cris does not support KVM */
+
+#endif
diff --git a/include/asm-cris/semaphore-helper.h b/include/asm-cris/semaphore-helper.h
deleted file mode 100644
index 27bfeca1..0000000
--- a/include/asm-cris/semaphore-helper.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* $Id: semaphore-helper.h,v 1.3 2001/03/26 15:00:33 orjanf Exp $
- *
- * SMP- and interrupt-safe semaphores helper functions. Generic versions, no
- * optimizations whatsoever...
- *
- */
-
-#ifndef _ASM_SEMAPHORE_HELPER_H
-#define _ASM_SEMAPHORE_HELPER_H
-
-#include <asm/atomic.h>
-#include <linux/errno.h>
-
-#define read(a) ((a)->counter)
-#define inc(a) (((a)->counter)++)
-#define dec(a) (((a)->counter)--)
-
-#define count_inc(a) ((*(a))++)
-
-/*
- * These two _must_ execute atomically wrt each other.
- */
-static inline void wake_one_more(struct semaphore * sem)
-{
- atomic_inc(&sem->waking);
-}
-
-static inline int waking_non_zero(struct semaphore *sem)
-{
- unsigned long flags;
- int ret = 0;
-
- local_irq_save(flags);
- if (read(&sem->waking) > 0) {
- dec(&sem->waking);
- ret = 1;
- }
- local_irq_restore(flags);
- return ret;
-}
-
-static inline int waking_non_zero_interruptible(struct semaphore *sem,
- struct task_struct *tsk)
-{
- int ret = 0;
- unsigned long flags;
-
- local_irq_save(flags);
- if (read(&sem->waking) > 0) {
- dec(&sem->waking);
- ret = 1;
- } else if (signal_pending(tsk)) {
- inc(&sem->count);
- ret = -EINTR;
- }
- local_irq_restore(flags);
- return ret;
-}
-
-static inline int waking_non_zero_trylock(struct semaphore *sem)
-{
- int ret = 1;
- unsigned long flags;
-
- local_irq_save(flags);
- if (read(&sem->waking) <= 0)
- inc(&sem->count);
- else {
- dec(&sem->waking);
- ret = 0;
- }
- local_irq_restore(flags);
- return ret;
-}
-
-#endif /* _ASM_SEMAPHORE_HELPER_H */
-
-
diff --git a/include/asm-cris/semaphore.h b/include/asm-cris/semaphore.h
index 31a4ac4..d9b2034 100644
--- a/include/asm-cris/semaphore.h
+++ b/include/asm-cris/semaphore.h
@@ -1,133 +1 @@
-/* $Id: semaphore.h,v 1.3 2001/05/08 13:54:09 bjornw Exp $ */
-
-/* On the i386 these are coded in asm, perhaps we should as well. Later.. */
-
-#ifndef _CRIS_SEMAPHORE_H
-#define _CRIS_SEMAPHORE_H
-
-#define RW_LOCK_BIAS 0x01000000
-
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-
-/*
- * CRIS semaphores, implemented in C-only so far.
- */
-
-struct semaphore {
- atomic_t count;
- atomic_t waking;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .waking = ATOMIC_INIT(0), \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init(struct semaphore *sem, int val)
-{
- *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-extern void __down(struct semaphore * sem);
-extern int __down_interruptible(struct semaphore * sem);
-extern int __down_trylock(struct semaphore * sem);
-extern void __up(struct semaphore * sem);
-
-/* notice - we probably can do cli/sti here instead of saving */
-
-static inline void down(struct semaphore * sem)
-{
- unsigned long flags;
- int failed;
-
- might_sleep();
-
- /* atomically decrement the semaphores count, and if its negative, we wait */
- cris_atomic_save(sem, flags);
- failed = --(sem->count.counter) < 0;
- cris_atomic_restore(sem, flags);
- if(failed) {
- __down(sem);
- }
-}
-
-/*
- * This version waits in interruptible state so that the waiting
- * process can be killed. The down_interruptible routine
- * returns negative for signalled and zero for semaphore acquired.
- */
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- unsigned long flags;
- int failed;
-
- might_sleep();
-
- /* atomically decrement the semaphores count, and if its negative, we wait */
- cris_atomic_save(sem, flags);
- failed = --(sem->count.counter) < 0;
- cris_atomic_restore(sem, flags);
- if(failed)
- failed = __down_interruptible(sem);
- return(failed);
-}
-
-static inline int down_trylock(struct semaphore * sem)
-{
- unsigned long flags;
- int failed;
-
- cris_atomic_save(sem, flags);
- failed = --(sem->count.counter) < 0;
- cris_atomic_restore(sem, flags);
- if(failed)
- failed = __down_trylock(sem);
- return(failed);
-
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore * sem)
-{
- unsigned long flags;
- int wakeup;
-
- /* atomically increment the semaphores count, and if it was negative, we wake people */
- cris_atomic_save(sem, flags);
- wakeup = ++(sem->count.counter) <= 0;
- cris_atomic_restore(sem, flags);
- if(wakeup) {
- __up(sem);
- }
-}
-
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-frv/kvm.h b/include/asm-frv/kvm.h
new file mode 100644
index 0000000..9c8a4f0
--- /dev/null
+++ b/include/asm-frv/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_FRV_H
+#define __LINUX_KVM_FRV_H
+
+/* frv does not support KVM */
+
+#endif
diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h
index 8353225..734a1d0 100644
--- a/include/asm-frv/mem-layout.h
+++ b/include/asm-frv/mem-layout.h
@@ -60,7 +60,7 @@
*/
#define BRK_BASE __UL(2 * 1024 * 1024 + PAGE_SIZE)
#define STACK_TOP __UL(2 * 1024 * 1024)
-#define STACK_TOP_MAX STACK_TOP
+#define STACK_TOP_MAX __UL(0xc0000000)
/* userspace process size */
#ifdef CONFIG_MMU
diff --git a/include/asm-frv/pgtable.h b/include/asm-frv/pgtable.h
index 6c0682e..4e21904 100644
--- a/include/asm-frv/pgtable.h
+++ b/include/asm-frv/pgtable.h
@@ -507,13 +507,22 @@
*/
static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
{
+ struct mm_struct *mm;
unsigned long ampr;
- pgd_t *pge = pgd_offset(current->mm, address);
- pud_t *pue = pud_offset(pge, address);
- pmd_t *pme = pmd_offset(pue, address);
- ampr = pme->ste[0] & 0xffffff00;
- ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | xAMPRx_V;
+ mm = current->mm;
+ if (mm) {
+ pgd_t *pge = pgd_offset(mm, address);
+ pud_t *pue = pud_offset(pge, address);
+ pmd_t *pme = pmd_offset(pue, address);
+
+ ampr = pme->ste[0] & 0xffffff00;
+ ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C |
+ xAMPRx_V;
+ } else {
+ address = ULONG_MAX;
+ ampr = 0;
+ }
asm volatile("movgs %0,scr0\n"
"movgs %0,scr1\n"
diff --git a/include/asm-frv/semaphore.h b/include/asm-frv/semaphore.h
index d7aaa19..d9b2034 100644
--- a/include/asm-frv/semaphore.h
+++ b/include/asm-frv/semaphore.h
@@ -1,155 +1 @@
-/* semaphore.h: semaphores for the FR-V
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_SEMAPHORE_H
-#define _ASM_SEMAPHORE_H
-
-#define RW_LOCK_BIAS 0x01000000
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
-
-/*
- * the semaphore definition
- * - if counter is >0 then there are tokens available on the semaphore for down to collect
- * - if counter is <=0 then there are no spare tokens, and anyone that wants one must wait
- * - if wait_list is not empty, then there are processes waiting for the semaphore
- */
-struct semaphore {
- unsigned counter;
- spinlock_t wait_lock;
- struct list_head wait_list;
-#ifdef CONFIG_DEBUG_SEMAPHORE
- unsigned __magic;
-#endif
-};
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
-# define __SEM_DEBUG_INIT(name) , (long)&(name).__magic
-#else
-# define __SEM_DEBUG_INIT(name)
-#endif
-
-
-#define __SEMAPHORE_INITIALIZER(name,count) \
-{ count, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) __SEM_DEBUG_INIT(name) }
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- *sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-extern void __down(struct semaphore *sem, unsigned long flags);
-extern int __down_interruptible(struct semaphore *sem, unsigned long flags);
-extern void __up(struct semaphore *sem);
-
-static inline void down(struct semaphore *sem)
-{
- unsigned long flags;
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
- CHECK_MAGIC(sem->__magic);
-#endif
-
- spin_lock_irqsave(&sem->wait_lock, flags);
- if (likely(sem->counter > 0)) {
- sem->counter--;
- spin_unlock_irqrestore(&sem->wait_lock, flags);
- }
- else {
- __down(sem, flags);
- }
-}
-
-static inline int down_interruptible(struct semaphore *sem)
-{
- unsigned long flags;
- int ret = 0;
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
- CHECK_MAGIC(sem->__magic);
-#endif
-
- spin_lock_irqsave(&sem->wait_lock, flags);
- if (likely(sem->counter > 0)) {
- sem->counter--;
- spin_unlock_irqrestore(&sem->wait_lock, flags);
- }
- else {
- ret = __down_interruptible(sem, flags);
- }
- return ret;
-}
-
-/*
- * non-blockingly attempt to down() a semaphore.
- * - returns zero if we acquired it
- */
-static inline int down_trylock(struct semaphore *sem)
-{
- unsigned long flags;
- int success = 0;
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
- CHECK_MAGIC(sem->__magic);
-#endif
-
- spin_lock_irqsave(&sem->wait_lock, flags);
- if (sem->counter > 0) {
- sem->counter--;
- success = 1;
- }
- spin_unlock_irqrestore(&sem->wait_lock, flags);
- return !success;
-}
-
-static inline void up(struct semaphore *sem)
-{
- unsigned long flags;
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
- CHECK_MAGIC(sem->__magic);
-#endif
-
- spin_lock_irqsave(&sem->wait_lock, flags);
- if (!list_empty(&sem->wait_list))
- __up(sem);
- else
- sem->counter++;
- spin_unlock_irqrestore(&sem->wait_lock, flags);
-}
-
-static inline int sem_getcount(struct semaphore *sem)
-{
- return sem->counter;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-frv/spr-regs.h b/include/asm-frv/spr-regs.h
index c2a541e..01e6af5 100644
--- a/include/asm-frv/spr-regs.h
+++ b/include/asm-frv/spr-regs.h
@@ -99,9 +99,23 @@
#define TBR_TT_TRAP1 (0x81 << 4)
#define TBR_TT_TRAP2 (0x82 << 4)
#define TBR_TT_TRAP3 (0x83 << 4)
+#define TBR_TT_TRAP120 (0xf8 << 4)
+#define TBR_TT_TRAP121 (0xf9 << 4)
+#define TBR_TT_TRAP122 (0xfa << 4)
+#define TBR_TT_TRAP123 (0xfb << 4)
+#define TBR_TT_TRAP124 (0xfc << 4)
+#define TBR_TT_TRAP125 (0xfd << 4)
#define TBR_TT_TRAP126 (0xfe << 4)
#define TBR_TT_BREAK (0xff << 4)
+#define TBR_TT_ATOMIC_CMPXCHG32 TBR_TT_TRAP120
+#define TBR_TT_ATOMIC_XCHG32 TBR_TT_TRAP121
+#define TBR_TT_ATOMIC_XOR TBR_TT_TRAP122
+#define TBR_TT_ATOMIC_OR TBR_TT_TRAP123
+#define TBR_TT_ATOMIC_AND TBR_TT_TRAP124
+#define TBR_TT_ATOMIC_SUB TBR_TT_TRAP125
+#define TBR_TT_ATOMIC_ADD TBR_TT_TRAP126
+
#define __get_TBR() ({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; })
/*
diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h
index 2c57f47..30a67a9 100644
--- a/include/asm-frv/system.h
+++ b/include/asm-frv/system.h
@@ -179,14 +179,23 @@
#define mb() asm volatile ("membar" : : :"memory")
#define rmb() asm volatile ("membar" : : :"memory")
#define wmb() asm volatile ("membar" : : :"memory")
-#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define read_barrier_depends() barrier()
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-
-#define read_barrier_depends() do {} while(0)
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
+#define set_mb(var, value) \
+ do { xchg(&var, (value)); } while (0)
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do {} while(0)
+#define set_mb(var, value) \
+ do { var = (value); barrier(); } while (0)
+#endif
#define HARD_RESET_NOW() \
do { \
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index fd9dcfd..92a6d91 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,3 +1,5 @@
+header-y += kvm.h
+
ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h)
unifdef-y += a.out.h
endif
diff --git a/include/asm-h8300/kvm.h b/include/asm-h8300/kvm.h
new file mode 100644
index 0000000..bdbed7b
--- /dev/null
+++ b/include/asm-h8300/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_H8300_H
+#define __LINUX_KVM_H8300_H
+
+/* h8300 does not support KVM */
+
+#endif
diff --git a/include/asm-h8300/semaphore-helper.h b/include/asm-h8300/semaphore-helper.h
deleted file mode 100644
index 4fea36b..0000000
--- a/include/asm-h8300/semaphore-helper.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef _H8300_SEMAPHORE_HELPER_H
-#define _H8300_SEMAPHORE_HELPER_H
-
-/*
- * SMP- and interrupt-safe semaphores helper functions.
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * based on
- * m68k version by Andreas Schwab
- */
-
-#include <linux/errno.h>
-
-/*
- * These two _must_ execute atomically wrt each other.
- */
-static inline void wake_one_more(struct semaphore * sem)
-{
- atomic_inc((atomic_t *)&sem->sleepers);
-}
-
-static inline int waking_non_zero(struct semaphore *sem)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 0;
- if (sem->sleepers > 0) {
- sem->sleepers--;
- ret = 1;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_interruptible:
- * 1 got the lock
- * 0 go to sleep
- * -EINTR interrupted
- */
-static inline int waking_non_zero_interruptible(struct semaphore *sem,
- struct task_struct *tsk)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 0;
- if (sem->sleepers > 0) {
- sem->sleepers--;
- ret = 1;
- } else if (signal_pending(tsk)) {
- atomic_inc(&sem->count);
- ret = -EINTR;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_trylock:
- * 1 failed to lock
- * 0 got the lock
- */
-static inline int waking_non_zero_trylock(struct semaphore *sem)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 1;
- if (sem->sleepers <= 0)
- atomic_inc(&sem->count);
- else {
- sem->sleepers--;
- ret = 0;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-#endif
diff --git a/include/asm-h8300/semaphore.h b/include/asm-h8300/semaphore.h
index f3ffff8..d9b2034 100644
--- a/include/asm-h8300/semaphore.h
+++ b/include/asm-h8300/semaphore.h
@@ -1,190 +1 @@
-#ifndef _H8300_SEMAPHORE_H
-#define _H8300_SEMAPHORE_H
-
-#define RW_LOCK_BIAS 0x01000000
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-
-/*
- * Interrupt-safe semaphores..
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * H8/300 version by Yoshinori Sato
- */
-
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .sleepers = 0, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-asmlinkage void __down_failed(void /* special register calling convention */);
-asmlinkage int __down_failed_interruptible(void /* params in registers */);
-asmlinkage int __down_failed_trylock(void /* params in registers */);
-asmlinkage void __up_wakeup(void /* special register calling convention */);
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage int __down_trylock(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-extern spinlock_t semaphore_wake_lock;
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "down_failed" is a special asm handler that calls the C
- * routine that actually waits. See arch/m68k/lib/semaphore.S
- */
-static inline void down(struct semaphore * sem)
-{
- register atomic_t *count asm("er0");
-
- might_sleep();
-
- count = &(sem->count);
- __asm__ __volatile__(
- "stc ccr,r3l\n\t"
- "orc #0x80,ccr\n\t"
- "mov.l %2, er1\n\t"
- "dec.l #1,er1\n\t"
- "mov.l er1,%0\n\t"
- "bpl 1f\n\t"
- "ldc r3l,ccr\n\t"
- "mov.l %1,er0\n\t"
- "jsr @___down\n\t"
- "bra 2f\n"
- "1:\n\t"
- "ldc r3l,ccr\n"
- "2:"
- : "=m"(*count)
- : "g"(sem),"m"(*count)
- : "cc", "er1", "er2", "er3");
-}
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- register atomic_t *count asm("er0");
-
- might_sleep();
-
- count = &(sem->count);
- __asm__ __volatile__(
- "stc ccr,r1l\n\t"
- "orc #0x80,ccr\n\t"
- "mov.l %3, er2\n\t"
- "dec.l #1,er2\n\t"
- "mov.l er2,%1\n\t"
- "bpl 1f\n\t"
- "ldc r1l,ccr\n\t"
- "mov.l %2,er0\n\t"
- "jsr @___down_interruptible\n\t"
- "bra 2f\n"
- "1:\n\t"
- "ldc r1l,ccr\n\t"
- "sub.l %0,%0\n\t"
- "2:\n\t"
- : "=r" (count),"=m" (*count)
- : "g"(sem),"m"(*count)
- : "cc", "er1", "er2", "er3");
- return (int)count;
-}
-
-static inline int down_trylock(struct semaphore * sem)
-{
- register atomic_t *count asm("er0");
-
- count = &(sem->count);
- __asm__ __volatile__(
- "stc ccr,r3l\n\t"
- "orc #0x80,ccr\n\t"
- "mov.l %3,er2\n\t"
- "dec.l #1,er2\n\t"
- "mov.l er2,%0\n\t"
- "bpl 1f\n\t"
- "ldc r3l,ccr\n\t"
- "jmp @3f\n\t"
- LOCK_SECTION_START(".align 2\n\t")
- "3:\n\t"
- "mov.l %2,er0\n\t"
- "jsr @___down_trylock\n\t"
- "jmp @2f\n\t"
- LOCK_SECTION_END
- "1:\n\t"
- "ldc r3l,ccr\n\t"
- "sub.l %1,%1\n"
- "2:"
- : "=m" (*count),"=r"(count)
- : "g"(sem),"m"(*count)
- : "cc", "er1","er2", "er3");
- return (int)count;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore * sem)
-{
- register atomic_t *count asm("er0");
-
- count = &(sem->count);
- __asm__ __volatile__(
- "stc ccr,r3l\n\t"
- "orc #0x80,ccr\n\t"
- "mov.l %2,er1\n\t"
- "inc.l #1,er1\n\t"
- "mov.l er1,%0\n\t"
- "ldc r3l,ccr\n\t"
- "sub.l er2,er2\n\t"
- "cmp.l er2,er1\n\t"
- "bgt 1f\n\t"
- "mov.l %1,er0\n\t"
- "jsr @___up\n"
- "1:"
- : "=m"(*count)
- : "g"(sem),"m"(*count)
- : "cc", "er1", "er2", "er3");
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h
index cd1cc39..fcfad32 100644
--- a/include/asm-ia64/acpi.h
+++ b/include/asm-ia64/acpi.h
@@ -35,6 +35,7 @@
#include <linux/init.h>
#include <linux/numa.h>
#include <asm/system.h>
+#include <asm/numa.h>
#define COMPILER_DEPENDENT_INT64 long
#define COMPILER_DEPENDENT_UINT64 unsigned long
@@ -115,7 +116,11 @@
extern void set_cpei_target_cpu(unsigned int cpu);
extern unsigned int get_cpei_target_cpu(void);
extern void prefill_possible_map(void);
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
extern int additional_cpus;
+#else
+#define additional_cpus 0
+#endif
#ifdef CONFIG_ACPI_NUMA
#if MAX_NUMNODES > 256
@@ -129,6 +134,34 @@
#define acpi_unlazy_tlb(x)
+#ifdef CONFIG_ACPI_NUMA
+extern cpumask_t early_cpu_possible_map;
+#define for_each_possible_early_cpu(cpu) \
+ for_each_cpu_mask((cpu), early_cpu_possible_map)
+
+static inline void per_cpu_scan_finalize(int min_cpus, int reserve_cpus)
+{
+ int low_cpu, high_cpu;
+ int cpu;
+ int next_nid = 0;
+
+ low_cpu = cpus_weight(early_cpu_possible_map);
+
+ high_cpu = max(low_cpu, min_cpus);
+ high_cpu = min(high_cpu + reserve_cpus, NR_CPUS);
+
+ for (cpu = low_cpu; cpu < high_cpu; cpu++) {
+ cpu_set(cpu, early_cpu_possible_map);
+ if (node_cpuid[cpu].nid == NUMA_NO_NODE) {
+ node_cpuid[cpu].nid = next_nid;
+ next_nid++;
+ if (next_nid >= num_online_nodes())
+ next_nid = 0;
+ }
+ }
+}
+#endif /* CONFIG_ACPI_NUMA */
+
#endif /*__KERNEL__*/
#endif /*_ASM_ACPI_H*/
diff --git a/include/asm-ia64/cputime.h b/include/asm-ia64/cputime.h
index 72400a7..f9abdec 100644
--- a/include/asm-ia64/cputime.h
+++ b/include/asm-ia64/cputime.h
@@ -1,6 +1,110 @@
+/*
+ * include/asm-ia64/cputime.h:
+ * Definitions for measuring cputime on ia64 machines.
+ *
+ * Based on <asm-powerpc/cputime.h>.
+ *
+ * Copyright (C) 2007 FUJITSU LIMITED
+ * Copyright (C) 2007 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in nsec.
+ * Otherwise we measure cpu time in jiffies using the generic definitions.
+ */
+
#ifndef __IA64_CPUTIME_H
#define __IA64_CPUTIME_H
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
#include <asm-generic/cputime.h>
+#else
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include <asm/processor.h>
+
+typedef u64 cputime_t;
+typedef u64 cputime64_t;
+
+#define cputime_zero ((cputime_t)0)
+#define cputime_max ((~((cputime_t)0) >> 1) - 1)
+#define cputime_add(__a, __b) ((__a) + (__b))
+#define cputime_sub(__a, __b) ((__a) - (__b))
+#define cputime_div(__a, __n) ((__a) / (__n))
+#define cputime_halve(__a) ((__a) >> 1)
+#define cputime_eq(__a, __b) ((__a) == (__b))
+#define cputime_gt(__a, __b) ((__a) > (__b))
+#define cputime_ge(__a, __b) ((__a) >= (__b))
+#define cputime_lt(__a, __b) ((__a) < (__b))
+#define cputime_le(__a, __b) ((__a) <= (__b))
+
+#define cputime64_zero ((cputime64_t)0)
+#define cputime64_add(__a, __b) ((__a) + (__b))
+#define cputime64_sub(__a, __b) ((__a) - (__b))
+#define cputime_to_cputime64(__ct) (__ct)
+
+/*
+ * Convert cputime <-> jiffies (HZ)
+ */
+#define cputime_to_jiffies(__ct) ((__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies_to_cputime(__jif) ((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime64_to_jiffies64(__ct) ((__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies64_to_cputime64(__jif) ((__jif) * (NSEC_PER_SEC / HZ))
+
+/*
+ * Convert cputime <-> milliseconds
+ */
+#define cputime_to_msecs(__ct) ((__ct) / NSEC_PER_MSEC)
+#define msecs_to_cputime(__msecs) ((__msecs) * NSEC_PER_MSEC)
+
+/*
+ * Convert cputime <-> seconds
+ */
+#define cputime_to_secs(__ct) ((__ct) / NSEC_PER_SEC)
+#define secs_to_cputime(__secs) ((__secs) * NSEC_PER_SEC)
+
+/*
+ * Convert cputime <-> timespec (nsec)
+ */
+static inline cputime_t timespec_to_cputime(const struct timespec *val)
+{
+ cputime_t ret = val->tv_sec * NSEC_PER_SEC;
+ return (ret + val->tv_nsec);
+}
+static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
+{
+ val->tv_sec = ct / NSEC_PER_SEC;
+ val->tv_nsec = ct % NSEC_PER_SEC;
+}
+
+/*
+ * Convert cputime <-> timeval (msec)
+ */
+static inline cputime_t timeval_to_cputime(struct timeval *val)
+{
+ cputime_t ret = val->tv_sec * NSEC_PER_SEC;
+ return (ret + val->tv_usec * NSEC_PER_USEC);
+}
+static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
+{
+ val->tv_sec = ct / NSEC_PER_SEC;
+ val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC;
+}
+
+/*
+ * Convert cputime <-> clock (USER_HZ)
+ */
+#define cputime_to_clock_t(__ct) ((__ct) / (NSEC_PER_SEC / USER_HZ))
+#define clock_t_to_cputime(__x) ((__x) * (NSEC_PER_SEC / USER_HZ))
+
+/*
+ * Convert cputime64 to clock.
+ */
+#define cputime64_to_clock_t(__ct) cputime_to_clock_t((cputime_t)__ct)
+
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
#endif /* __IA64_CPUTIME_H */
diff --git a/include/asm-ia64/elf.h b/include/asm-ia64/elf.h
index f8e83ec..5e0c1a6 100644
--- a/include/asm-ia64/elf.h
+++ b/include/asm-ia64/elf.h
@@ -26,6 +26,7 @@
#define ELF_ARCH EM_IA_64
#define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
/* Least-significant four bits of ELF header's e_flags are OS-specific. The bits are
interpreted as follows by Linux: */
@@ -154,6 +155,30 @@
#define ELF_NGREG 128 /* we really need just 72 but let's leave some headroom... */
#define ELF_NFPREG 128 /* f0 and f1 could be omitted, but so what... */
+/* elf_gregset_t register offsets */
+#define ELF_GR_0_OFFSET 0
+#define ELF_NAT_OFFSET (32 * sizeof(elf_greg_t))
+#define ELF_PR_OFFSET (33 * sizeof(elf_greg_t))
+#define ELF_BR_0_OFFSET (34 * sizeof(elf_greg_t))
+#define ELF_CR_IIP_OFFSET (42 * sizeof(elf_greg_t))
+#define ELF_CFM_OFFSET (43 * sizeof(elf_greg_t))
+#define ELF_CR_IPSR_OFFSET (44 * sizeof(elf_greg_t))
+#define ELF_GR_OFFSET(i) (ELF_GR_0_OFFSET + i * sizeof(elf_greg_t))
+#define ELF_BR_OFFSET(i) (ELF_BR_0_OFFSET + i * sizeof(elf_greg_t))
+#define ELF_AR_RSC_OFFSET (45 * sizeof(elf_greg_t))
+#define ELF_AR_BSP_OFFSET (46 * sizeof(elf_greg_t))
+#define ELF_AR_BSPSTORE_OFFSET (47 * sizeof(elf_greg_t))
+#define ELF_AR_RNAT_OFFSET (48 * sizeof(elf_greg_t))
+#define ELF_AR_CCV_OFFSET (49 * sizeof(elf_greg_t))
+#define ELF_AR_UNAT_OFFSET (50 * sizeof(elf_greg_t))
+#define ELF_AR_FPSR_OFFSET (51 * sizeof(elf_greg_t))
+#define ELF_AR_PFS_OFFSET (52 * sizeof(elf_greg_t))
+#define ELF_AR_LC_OFFSET (53 * sizeof(elf_greg_t))
+#define ELF_AR_EC_OFFSET (54 * sizeof(elf_greg_t))
+#define ELF_AR_CSD_OFFSET (55 * sizeof(elf_greg_t))
+#define ELF_AR_SSD_OFFSET (56 * sizeof(elf_greg_t))
+#define ELF_AR_END_OFFSET (57 * sizeof(elf_greg_t))
+
typedef unsigned long elf_fpxregset_t;
typedef unsigned long elf_greg_t;
@@ -183,12 +208,6 @@
struct task_struct;
-extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
-extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
-
-#define ELF_CORE_COPY_TASK_REGS(tsk, elf_gregs) dump_task_regs(tsk, elf_gregs)
-#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
-
#define GATE_EHDR ((const struct elfhdr *) GATE_ADDR)
/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
diff --git a/include/asm-ia64/ide.h b/include/asm-ia64/ide.h
index 1ccf238..8fa3f8c 100644
--- a/include/asm-ia64/ide.h
+++ b/include/asm-ia64/ide.h
@@ -16,8 +16,6 @@
#include <linux/irq.h>
-#define IDE_ARCH_OBSOLETE_DEFAULTS
-
static inline int ide_default_irq(unsigned long base)
{
switch (base) {
@@ -46,14 +44,6 @@
}
}
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
-#ifdef CONFIG_PCI
-#define ide_init_default_irq(base) (0)
-#else
-#define ide_init_default_irq(base) ide_default_irq(base)
-#endif
-
#include <asm-generic/ide_iops.h>
#endif /* __KERNEL__ */
diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h
index d03bf9f..ef71b57 100644
--- a/include/asm-ia64/kprobes.h
+++ b/include/asm-ia64/kprobes.h
@@ -30,8 +30,12 @@
#include <asm/break.h>
#define __ARCH_WANT_KPROBES_INSN_SLOT
-#define MAX_INSN_SIZE 1
+#define MAX_INSN_SIZE 2 /* last half is for kprobe-booster */
#define BREAK_INST (long)(__IA64_BREAK_KPROBE << 6)
+#define NOP_M_INST (long)(1<<27)
+#define BRL_INST(i1, i2) ((long)((0xcL << 37) | /* brl */ \
+ (0x1L << 12) | /* many */ \
+ (((i1) & 1) << 36) | ((i2) << 13))) /* imm */
typedef union cmp_inst {
struct {
@@ -112,6 +116,7 @@
#define INST_FLAG_FIX_RELATIVE_IP_ADDR 1
#define INST_FLAG_FIX_BRANCH_REG 2
#define INST_FLAG_BREAK_INST 4
+ #define INST_FLAG_BOOSTABLE 8
unsigned long inst_flag;
unsigned short target_br_reg;
unsigned short slot;
diff --git a/include/asm-ia64/kregs.h b/include/asm-ia64/kregs.h
index 7e55a58..aefcdfe 100644
--- a/include/asm-ia64/kregs.h
+++ b/include/asm-ia64/kregs.h
@@ -31,6 +31,9 @@
#define IA64_TR_PALCODE 1 /* itr1: maps PALcode as required by EFI */
#define IA64_TR_CURRENT_STACK 1 /* dtr1: maps kernel's memory- & register-stacks */
+#define IA64_TR_ALLOC_BASE 2 /* itr&dtr: Base of dynamic TR resource*/
+#define IA64_TR_ALLOC_MAX 32 /* Max number for dynamic use*/
+
/* Processor status register bits: */
#define IA64_PSR_BE_BIT 1
#define IA64_PSR_UP_BIT 2
diff --git a/include/asm-ia64/kvm.h b/include/asm-ia64/kvm.h
new file mode 100644
index 0000000..030d29b
--- /dev/null
+++ b/include/asm-ia64/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_IA64_H
+#define __LINUX_KVM_IA64_H
+
+/* ia64 does not support KVM */
+
+#endif
diff --git a/include/asm-ia64/meminit.h b/include/asm-ia64/meminit.h
index f93308f..7245a57 100644
--- a/include/asm-ia64/meminit.h
+++ b/include/asm-ia64/meminit.h
@@ -35,6 +35,7 @@
extern void reserve_memory (void);
extern void find_initrd (void);
extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
+extern int filter_memory (unsigned long start, unsigned long end, void *arg);
extern unsigned long efi_memmap_init(unsigned long *s, unsigned long *e);
extern int find_max_min_low_pfn (unsigned long , unsigned long, void *);
@@ -56,7 +57,7 @@
#define IGNORE_PFN0 1 /* XXX fix me: ignore pfn 0 until TLB miss handler is updated... */
-extern int register_active_ranges(u64 start, u64 end, void *arg);
+extern int register_active_ranges(u64 start, u64 len, int nid);
#ifdef CONFIG_VIRTUAL_MEM_MAP
# define LARGE_GAP 0x40000000 /* Use virtual mem map if hole is > than this */
diff --git a/include/asm-ia64/numa.h b/include/asm-ia64/numa.h
index 6a8a27c..3499ff5 100644
--- a/include/asm-ia64/numa.h
+++ b/include/asm-ia64/numa.h
@@ -22,6 +22,8 @@
#include <asm/mmzone.h>
+#define NUMA_NO_NODE -1
+
extern u16 cpu_to_node_map[NR_CPUS] __cacheline_aligned;
extern cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
extern pg_data_t *pgdat_list[MAX_NUMNODES];
diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h
index 8a695d3..67b0290 100644
--- a/include/asm-ia64/pal.h
+++ b/include/asm-ia64/pal.h
@@ -13,6 +13,7 @@
* Copyright (C) 1999 VA Linux Systems
* Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
* Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ * Copyright (C) 2008 Silicon Graphics, Inc. (SGI)
*
* 99/10/01 davidm Make sure we pass zero for reserved parameters.
* 00/03/07 davidm Updated pal_cache_flush() to be in sync with PAL v2.6.
@@ -73,6 +74,8 @@
#define PAL_CACHE_SHARED_INFO 43 /* returns information on caches shared by logical processor */
#define PAL_GET_HW_POLICY 48 /* Get current hardware resource sharing policy */
#define PAL_SET_HW_POLICY 49 /* Set current hardware resource sharing policy */
+#define PAL_VP_INFO 50 /* Information about virtual processor features */
+#define PAL_MC_HW_TRACKING 51 /* Hardware tracking status */
#define PAL_COPY_PAL 256 /* relocate PAL procedures and PAL PMI */
#define PAL_HALT_INFO 257 /* return the low power capabilities of processor */
@@ -504,7 +507,8 @@
wiv : 1, /* Way field valid */
reserved2 : 1,
dp : 1, /* Data poisoned on MBE */
- reserved3 : 8,
+ reserved3 : 6,
+ hlth : 2, /* Health indicator */
index : 20, /* Cache line index */
reserved4 : 2,
@@ -542,7 +546,9 @@
dtc : 1, /* Fail in data TC */
itc : 1, /* Fail in inst. TC */
op : 4, /* Cache operation */
- reserved3 : 30,
+ reserved3 : 6,
+ hlth : 2, /* Health indicator */
+ reserved4 : 22,
is : 1, /* instruction set (1 == ia32) */
iv : 1, /* instruction set field valid */
@@ -633,7 +639,8 @@
way : 6, /* Way of structure */
wv : 1, /* way valid */
xv : 1, /* index valid */
- reserved1 : 8,
+ reserved1 : 6,
+ hlth : 2, /* Health indicator */
index : 8, /* Index or set of the uarch
* structure that failed.
*/
@@ -1213,14 +1220,12 @@
/* Return the machine check dynamic processor state */
static inline s64
-ia64_pal_mc_dynamic_state (u64 offset, u64 *size, u64 *pds)
+ia64_pal_mc_dynamic_state (u64 info_type, u64 dy_buffer, u64 *size)
{
struct ia64_pal_retval iprv;
- PAL_CALL(iprv, PAL_MC_DYNAMIC_STATE, offset, 0, 0);
+ PAL_CALL(iprv, PAL_MC_DYNAMIC_STATE, info_type, dy_buffer, 0);
if (size)
*size = iprv.v0;
- if (pds)
- *pds = iprv.v1;
return iprv.status;
}
@@ -1281,15 +1286,41 @@
return iprv.status;
}
+typedef union pal_hw_tracking_u {
+ u64 pht_data;
+ struct {
+ u64 itc :4, /* Instruction cache tracking */
+ dct :4, /* Date cache tracking */
+ itt :4, /* Instruction TLB tracking */
+ ddt :4, /* Data TLB tracking */
+ reserved:48;
+ } pal_hw_tracking_s;
+} pal_hw_tracking_u_t;
+
+/*
+ * Hardware tracking status.
+ */
+static inline s64
+ia64_pal_mc_hw_tracking (u64 *status)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_MC_HW_TRACKING, 0, 0, 0);
+ if (status)
+ *status = iprv.v0;
+ return iprv.status;
+}
+
/* Register a platform dependent location with PAL to which it can save
* minimal processor state in the event of a machine check or initialization
* event.
*/
static inline s64
-ia64_pal_mc_register_mem (u64 physical_addr)
+ia64_pal_mc_register_mem (u64 physical_addr, u64 size, u64 *req_size)
{
struct ia64_pal_retval iprv;
- PAL_CALL(iprv, PAL_MC_REGISTER_MEM, physical_addr, 0, 0);
+ PAL_CALL(iprv, PAL_MC_REGISTER_MEM, physical_addr, size, 0);
+ if (req_size)
+ *req_size = iprv.v0;
return iprv.status;
}
@@ -1631,6 +1662,29 @@
return iprv.status;
}
+typedef union pal_vp_info_u {
+ u64 pvi_val;
+ struct {
+ u64 index: 48, /* virtual feature set info */
+ vmm_id: 16; /* feature set id */
+ } pal_vp_info_s;
+} pal_vp_info_u_t;
+
+/*
+ * Returns infomation about virtual processor features
+ */
+static inline s64
+ia64_pal_vp_info (u64 feature_set, u64 vp_buffer, u64 *vp_info, u64 *vmm_id)
+{
+ struct ia64_pal_retval iprv;
+ PAL_CALL(iprv, PAL_VP_INFO, feature_set, vp_buffer, 0);
+ if (vp_info)
+ *vp_info = iprv.v0;
+ if (vmm_id)
+ *vmm_id = iprv.v1;
+ return iprv.status;
+}
+
typedef union pal_itr_valid_u {
u64 piv_val;
struct {
diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
index e6204f1..ed70862 100644
--- a/include/asm-ia64/pgtable.h
+++ b/include/asm-ia64/pgtable.h
@@ -371,7 +371,7 @@
/* The offset in the 1-level directory is given by the 3 region bits
(61..63) and the level-1 bits. */
static inline pgd_t*
-pgd_offset (struct mm_struct *mm, unsigned long address)
+pgd_offset (const struct mm_struct *mm, unsigned long address)
{
return mm->pgd + pgd_index(address);
}
diff --git a/include/asm-ia64/sal.h b/include/asm-ia64/sal.h
index f4904db..89594b4 100644
--- a/include/asm-ia64/sal.h
+++ b/include/asm-ia64/sal.h
@@ -296,6 +296,9 @@
EFI_GUID(0xe429faf8, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
#define SAL_PLAT_BUS_ERR_SECT_GUID \
EFI_GUID(0xe429faf9, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID \
+ EFI_GUID(0x6cb0a200, 0x893a, 0x11da, 0x96, 0xd2, 0x0, 0x10, 0x83, 0xff, \
+ 0xca, 0x4d)
#define MAX_CACHE_ERRORS 6
#define MAX_TLB_ERRORS 6
@@ -879,6 +882,24 @@
extern void ia64_sal_handler_init(void *entry_point, void *gpval);
+#define PALO_MAX_TLB_PURGES 0xFFFF
+#define PALO_SIG "PALO"
+
+struct palo_table {
+ u8 signature[4]; /* Should be "PALO" */
+ u32 length;
+ u8 minor_revision;
+ u8 major_revision;
+ u8 checksum;
+ u8 reserved1[5];
+ u16 max_tlb_purges;
+ u8 reserved2[6];
+};
+
+#define NPTCG_FROM_PAL 0
+#define NPTCG_FROM_PALO 1
+#define NPTCG_FROM_KERNEL_PARAMETER 2
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_IA64_SAL_H */
diff --git a/include/asm-ia64/semaphore.h b/include/asm-ia64/semaphore.h
index d8393d1..d9b2034 100644
--- a/include/asm-ia64/semaphore.h
+++ b/include/asm-ia64/semaphore.h
@@ -1,99 +1 @@
-#ifndef _ASM_IA64_SEMAPHORE_H
-#define _ASM_IA64_SEMAPHORE_H
-
-/*
- * Copyright (C) 1998-2000 Hewlett-Packard Co
- * Copyright (C) 1998-2000 David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-#include <asm/atomic.h>
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .sleepers = 0, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
-
-static inline void
-sema_init (struct semaphore *sem, int val)
-{
- *sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
-}
-
-static inline void
-init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void
-init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-extern void __down (struct semaphore * sem);
-extern int __down_interruptible (struct semaphore * sem);
-extern int __down_trylock (struct semaphore * sem);
-extern void __up (struct semaphore * sem);
-
-/*
- * Atomically decrement the semaphore's count. If it goes negative,
- * block the calling thread in the TASK_UNINTERRUPTIBLE state.
- */
-static inline void
-down (struct semaphore *sem)
-{
- might_sleep();
- if (ia64_fetchadd(-1, &sem->count.counter, acq) < 1)
- __down(sem);
-}
-
-/*
- * Atomically decrement the semaphore's count. If it goes negative,
- * block the calling thread in the TASK_INTERRUPTIBLE state.
- */
-static inline int
-down_interruptible (struct semaphore * sem)
-{
- int ret = 0;
-
- might_sleep();
- if (ia64_fetchadd(-1, &sem->count.counter, acq) < 1)
- ret = __down_interruptible(sem);
- return ret;
-}
-
-static inline int
-down_trylock (struct semaphore *sem)
-{
- int ret = 0;
-
- if (ia64_fetchadd(-1, &sem->count.counter, acq) < 1)
- ret = __down_trylock(sem);
- return ret;
-}
-
-static inline void
-up (struct semaphore * sem)
-{
- if (ia64_fetchadd(1, &sem->count.counter, rel) <= -1)
- __up(sem);
-}
-
-#endif /* _ASM_IA64_SEMAPHORE_H */
+#include <linux/semaphore.h>
diff --git a/include/asm-ia64/smp.h b/include/asm-ia64/smp.h
index 4fa733d..ec5f355 100644
--- a/include/asm-ia64/smp.h
+++ b/include/asm-ia64/smp.h
@@ -38,6 +38,9 @@
return lid.f.id << 8 | lid.f.eid;
}
+extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *),
+ void *info, int wait);
+
#define hard_smp_processor_id() ia64_get_lid()
#ifdef CONFIG_SMP
diff --git a/include/asm-ia64/system.h b/include/asm-ia64/system.h
index 595112b..dff8128 100644
--- a/include/asm-ia64/system.h
+++ b/include/asm-ia64/system.h
@@ -210,6 +210,13 @@
extern void ia64_save_extra (struct task_struct *task);
extern void ia64_load_extra (struct task_struct *task);
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next);
+# define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n)
+#else
+# define IA64_ACCOUNT_ON_SWITCH(p,n)
+#endif
+
#ifdef CONFIG_PERFMON
DECLARE_PER_CPU(unsigned long, pfm_syst_info);
# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
@@ -222,6 +229,7 @@
|| IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE())
#define __switch_to(prev,next,last) do { \
+ IA64_ACCOUNT_ON_SWITCH(prev, next); \
if (IA64_HAS_EXTRA_STATE(prev)) \
ia64_save_extra(prev); \
if (IA64_HAS_EXTRA_STATE(next)) \
@@ -266,6 +274,10 @@
void default_idle(void);
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void account_system_vtime(struct task_struct *);
+#endif
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h
index 93d83cb..6da8069 100644
--- a/include/asm-ia64/thread_info.h
+++ b/include/asm-ia64/thread_info.h
@@ -31,6 +31,12 @@
mm_segment_t addr_limit; /* user-level address space limit */
int preempt_count; /* 0=premptable, <0=BUG; will also serve as bh-counter */
struct restart_block restart_block;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+ __u64 ac_stamp;
+ __u64 ac_leave;
+ __u64 ac_stime;
+ __u64 ac_utime;
+#endif
};
#define THREAD_SIZE KERNEL_STACK_SIZE
@@ -62,9 +68,17 @@
#define task_stack_page(tsk) ((void *)(tsk))
#define __HAVE_THREAD_FUNCTIONS
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#define setup_thread_stack(p, org) \
+ *task_thread_info(p) = *task_thread_info(org); \
+ task_thread_info(p)->ac_stime = 0; \
+ task_thread_info(p)->ac_utime = 0; \
+ task_thread_info(p)->task = (p);
+#else
#define setup_thread_stack(p, org) \
*task_thread_info(p) = *task_thread_info(org); \
task_thread_info(p)->task = (p);
+#endif
#define end_of_stack(p) (unsigned long *)((void *)(p) + IA64_RBS_OFFSET)
#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
diff --git a/include/asm-ia64/tlb.h b/include/asm-ia64/tlb.h
index 26edcb7..20d8a39 100644
--- a/include/asm-ia64/tlb.h
+++ b/include/asm-ia64/tlb.h
@@ -64,6 +64,32 @@
struct page *pages[FREE_PTE_NR];
};
+struct ia64_tr_entry {
+ u64 ifa;
+ u64 itir;
+ u64 pte;
+ u64 rr;
+}; /*Record for tr entry!*/
+
+extern int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size);
+extern void ia64_ptr_entry(u64 target_mask, int slot);
+
+extern struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX];
+
+/*
+ region register macros
+*/
+#define RR_TO_VE(val) (((val) >> 0) & 0x0000000000000001)
+#define RR_VE(val) (((val) & 0x0000000000000001) << 0)
+#define RR_VE_MASK 0x0000000000000001L
+#define RR_VE_SHIFT 0
+#define RR_TO_PS(val) (((val) >> 2) & 0x000000000000003f)
+#define RR_PS(val) (((val) & 0x000000000000003f) << 2)
+#define RR_PS_MASK 0x00000000000000fcL
+#define RR_PS_SHIFT 2
+#define RR_RID_MASK 0x00000000ffffff00L
+#define RR_TO_RID(val) ((val >> 8) & 0xffffff)
+
/* Users of the generic TLB shootdown code must declare this storage space. */
DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
diff --git a/include/asm-ia64/tlbflush.h b/include/asm-ia64/tlbflush.h
index 7774a1c..3be25df 100644
--- a/include/asm-ia64/tlbflush.h
+++ b/include/asm-ia64/tlbflush.h
@@ -17,6 +17,7 @@
* Now for some TLB flushing routines. This is the kind of stuff that
* can be very expensive, so try to avoid them whenever possible.
*/
+extern void setup_ptcg_sem(int max_purges, int from_palo);
/*
* Flush everything (kernel mapping may also have changed due to
diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h
index 5d2044e..1e7f647 100644
--- a/include/asm-m32r/ide.h
+++ b/include/asm-m32r/ide.h
@@ -23,8 +23,6 @@
# endif
#endif
-#define IDE_ARCH_OBSOLETE_DEFAULTS
-
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
@@ -65,14 +63,6 @@
}
}
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
-#ifdef CONFIG_BLK_DEV_IDEPCI
-#define ide_init_default_irq(base) (0)
-#else
-#define ide_init_default_irq(base) ide_default_irq(base)
-#endif
-
#include <asm-generic/ide_iops.h>
#endif /* __KERNEL__ */
diff --git a/include/asm-m32r/kvm.h b/include/asm-m32r/kvm.h
new file mode 100644
index 0000000..99a40515
--- /dev/null
+++ b/include/asm-m32r/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_M32R_H
+#define __LINUX_KVM_M32R_H
+
+/* m32r does not support KVM */
+
+#endif
diff --git a/include/asm-m32r/semaphore.h b/include/asm-m32r/semaphore.h
index b5bf95a..d9b2034 100644
--- a/include/asm-m32r/semaphore.h
+++ b/include/asm-m32r/semaphore.h
@@ -1,144 +1 @@
-#ifndef _ASM_M32R_SEMAPHORE_H
-#define _ASM_M32R_SEMAPHORE_H
-
-#include <linux/linkage.h>
-
-#ifdef __KERNEL__
-
-/*
- * SMP- and interrupt-safe semaphores..
- *
- * Copyright (C) 1996 Linus Torvalds
- * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-#include <asm/assembler.h>
-#include <asm/system.h>
-#include <asm/atomic.h>
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .sleepers = 0, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
-/*
- * *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
- *
- * i'd rather use the more flexible initialization above, but sadly
- * GCC 2.7.2.3 emits a bogus warning. EGCS doesnt. Oh well.
- */
- atomic_set(&sem->count, val);
- sem->sleepers = 0;
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-asmlinkage void __down_failed(void /* special register calling convention */);
-asmlinkage int __down_failed_interruptible(void /* params in registers */);
-asmlinkage int __down_failed_trylock(void /* params in registers */);
-asmlinkage void __up_wakeup(void /* special register calling convention */);
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage int __down_trylock(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-/*
- * Atomically decrement the semaphore's count. If it goes negative,
- * block the calling thread in the TASK_UNINTERRUPTIBLE state.
- */
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
- if (unlikely(atomic_dec_return(&sem->count) < 0))
- __down(sem);
-}
-
-/*
- * Interruptible try to acquire a semaphore. If we obtained
- * it, return zero. If we were interrupted, returns -EINTR
- */
-static inline int down_interruptible(struct semaphore * sem)
-{
- int result = 0;
-
- might_sleep();
- if (unlikely(atomic_dec_return(&sem->count) < 0))
- result = __down_interruptible(sem);
-
- return result;
-}
-
-/*
- * Non-blockingly attempt to down() a semaphore.
- * Returns zero if we acquired it
- */
-static inline int down_trylock(struct semaphore * sem)
-{
- unsigned long flags;
- long count;
- int result = 0;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# down_trylock \n\t"
- DCACHE_CLEAR("%0", "r4", "%1")
- M32R_LOCK" %0, @%1; \n\t"
- "addi %0, #-1; \n\t"
- M32R_UNLOCK" %0, @%1; \n\t"
- : "=&r" (count)
- : "r" (&sem->count)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- if (unlikely(count < 0))
- result = __down_trylock(sem);
-
- return result;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore * sem)
-{
- if (unlikely(atomic_inc_return(&sem->count) <= 0))
- __up(sem);
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_SEMAPHORE_H */
+#include <linux/semaphore.h>
diff --git a/include/asm-m68k/kvm.h b/include/asm-m68k/kvm.h
new file mode 100644
index 0000000..7ed27fc
--- /dev/null
+++ b/include/asm-m68k/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_M68K_H
+#define __LINUX_KVM_M68K_H
+
+/* m68k does not support KVM */
+
+#endif
diff --git a/include/asm-m68k/semaphore-helper.h b/include/asm-m68k/semaphore-helper.h
deleted file mode 100644
index eef30ba..0000000
--- a/include/asm-m68k/semaphore-helper.h
+++ /dev/null
@@ -1,142 +0,0 @@
-#ifndef _M68K_SEMAPHORE_HELPER_H
-#define _M68K_SEMAPHORE_HELPER_H
-
-/*
- * SMP- and interrupt-safe semaphores helper functions.
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * m68k version by Andreas Schwab
- */
-
-#include <linux/errno.h>
-
-/*
- * These two _must_ execute atomically wrt each other.
- */
-static inline void wake_one_more(struct semaphore * sem)
-{
- atomic_inc(&sem->waking);
-}
-
-#ifndef CONFIG_RMW_INSNS
-extern spinlock_t semaphore_wake_lock;
-#endif
-
-static inline int waking_non_zero(struct semaphore *sem)
-{
- int ret;
-#ifndef CONFIG_RMW_INSNS
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 0;
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 1;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-#else
- int tmp1, tmp2;
-
- __asm__ __volatile__
- ("1: movel %1,%2\n"
- " jle 2f\n"
- " subql #1,%2\n"
- " casl %1,%2,%3\n"
- " jne 1b\n"
- " moveq #1,%0\n"
- "2:"
- : "=d" (ret), "=d" (tmp1), "=d" (tmp2)
- : "m" (sem->waking), "0" (0), "1" (sem->waking));
-#endif
-
- return ret;
-}
-
-/*
- * waking_non_zero_interruptible:
- * 1 got the lock
- * 0 go to sleep
- * -EINTR interrupted
- */
-static inline int waking_non_zero_interruptible(struct semaphore *sem,
- struct task_struct *tsk)
-{
- int ret;
-#ifndef CONFIG_RMW_INSNS
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 0;
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 1;
- } else if (signal_pending(tsk)) {
- atomic_inc(&sem->count);
- ret = -EINTR;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-#else
- int tmp1, tmp2;
-
- __asm__ __volatile__
- ("1: movel %1,%2\n"
- " jle 2f\n"
- " subql #1,%2\n"
- " casl %1,%2,%3\n"
- " jne 1b\n"
- " moveq #1,%0\n"
- " jra %a4\n"
- "2:"
- : "=d" (ret), "=d" (tmp1), "=d" (tmp2)
- : "m" (sem->waking), "i" (&&next), "0" (0), "1" (sem->waking));
- if (signal_pending(tsk)) {
- atomic_inc(&sem->count);
- ret = -EINTR;
- }
-next:
-#endif
-
- return ret;
-}
-
-/*
- * waking_non_zero_trylock:
- * 1 failed to lock
- * 0 got the lock
- */
-static inline int waking_non_zero_trylock(struct semaphore *sem)
-{
- int ret;
-#ifndef CONFIG_RMW_INSNS
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 1;
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 0;
- } else
- atomic_inc(&sem->count);
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-#else
- int tmp1, tmp2;
-
- __asm__ __volatile__
- ("1: movel %1,%2\n"
- " jle 2f\n"
- " subql #1,%2\n"
- " casl %1,%2,%3\n"
- " jne 1b\n"
- " moveq #0,%0\n"
- "2:"
- : "=d" (ret), "=d" (tmp1), "=d" (tmp2)
- : "m" (sem->waking), "0" (1), "1" (sem->waking));
- if (ret)
- atomic_inc(&sem->count);
-#endif
- return ret;
-}
-
-#endif
diff --git a/include/asm-m68k/semaphore.h b/include/asm-m68k/semaphore.h
index 64d6b11..d9b2034 100644
--- a/include/asm-m68k/semaphore.h
+++ b/include/asm-m68k/semaphore.h
@@ -1,163 +1 @@
-#ifndef _M68K_SEMAPHORE_H
-#define _M68K_SEMAPHORE_H
-
-#define RW_LOCK_BIAS 0x01000000
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
-#include <linux/stringify.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-
-/*
- * Interrupt-safe semaphores..
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * m68k version by Andreas Schwab
- */
-
-
-struct semaphore {
- atomic_t count;
- atomic_t waking;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .waking = ATOMIC_INIT(0), \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init(struct semaphore *sem, int val)
-{
- *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-asmlinkage void __down_failed(void /* special register calling convention */);
-asmlinkage int __down_failed_interruptible(void /* params in registers */);
-asmlinkage int __down_failed_trylock(void /* params in registers */);
-asmlinkage void __up_wakeup(void /* special register calling convention */);
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage int __down_trylock(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "down_failed" is a special asm handler that calls the C
- * routine that actually waits. See arch/m68k/lib/semaphore.S
- */
-static inline void down(struct semaphore *sem)
-{
- register struct semaphore *sem1 __asm__ ("%a1") = sem;
-
- might_sleep();
- __asm__ __volatile__(
- "| atomic down operation\n\t"
- "subql #1,%0@\n\t"
- "jmi 2f\n\t"
- "1:\n"
- LOCK_SECTION_START(".even\n\t")
- "2:\tpea 1b\n\t"
- "jbra __down_failed\n"
- LOCK_SECTION_END
- : /* no outputs */
- : "a" (sem1)
- : "memory");
-}
-
-static inline int down_interruptible(struct semaphore *sem)
-{
- register struct semaphore *sem1 __asm__ ("%a1") = sem;
- register int result __asm__ ("%d0");
-
- might_sleep();
- __asm__ __volatile__(
- "| atomic interruptible down operation\n\t"
- "subql #1,%1@\n\t"
- "jmi 2f\n\t"
- "clrl %0\n"
- "1:\n"
- LOCK_SECTION_START(".even\n\t")
- "2:\tpea 1b\n\t"
- "jbra __down_failed_interruptible\n"
- LOCK_SECTION_END
- : "=d" (result)
- : "a" (sem1)
- : "memory");
- return result;
-}
-
-static inline int down_trylock(struct semaphore *sem)
-{
- register struct semaphore *sem1 __asm__ ("%a1") = sem;
- register int result __asm__ ("%d0");
-
- __asm__ __volatile__(
- "| atomic down trylock operation\n\t"
- "subql #1,%1@\n\t"
- "jmi 2f\n\t"
- "clrl %0\n"
- "1:\n"
- LOCK_SECTION_START(".even\n\t")
- "2:\tpea 1b\n\t"
- "jbra __down_failed_trylock\n"
- LOCK_SECTION_END
- : "=d" (result)
- : "a" (sem1)
- : "memory");
- return result;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore *sem)
-{
- register struct semaphore *sem1 __asm__ ("%a1") = sem;
-
- __asm__ __volatile__(
- "| atomic up operation\n\t"
- "addql #1,%0@\n\t"
- "jle 2f\n"
- "1:\n"
- LOCK_SECTION_START(".even\n\t")
- "2:\t"
- "pea 1b\n\t"
- "jbra __up_wakeup\n"
- LOCK_SECTION_END
- : /* no outputs */
- : "a" (sem1)
- : "memory");
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-m68knommu/kvm.h b/include/asm-m68knommu/kvm.h
new file mode 100644
index 0000000..b49d425
--- /dev/null
+++ b/include/asm-m68knommu/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_M68KNOMMU_H
+#define __LINUX_KVM_M68KNOMMU_H
+
+/* m68knommu does not support KVM */
+
+#endif
diff --git a/include/asm-m68knommu/semaphore-helper.h b/include/asm-m68knommu/semaphore-helper.h
deleted file mode 100644
index 43da7bc..0000000
--- a/include/asm-m68knommu/semaphore-helper.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef _M68K_SEMAPHORE_HELPER_H
-#define _M68K_SEMAPHORE_HELPER_H
-
-/*
- * SMP- and interrupt-safe semaphores helper functions.
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * m68k version by Andreas Schwab
- */
-
-
-/*
- * These two _must_ execute atomically wrt each other.
- */
-static inline void wake_one_more(struct semaphore * sem)
-{
- atomic_inc(&sem->waking);
-}
-
-static inline int waking_non_zero(struct semaphore *sem)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 0;
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 1;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_interruptible:
- * 1 got the lock
- * 0 go to sleep
- * -EINTR interrupted
- */
-static inline int waking_non_zero_interruptible(struct semaphore *sem,
- struct task_struct *tsk)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 0;
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 1;
- } else if (signal_pending(tsk)) {
- atomic_inc(&sem->count);
- ret = -EINTR;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_trylock:
- * 1 failed to lock
- * 0 got the lock
- */
-static inline int waking_non_zero_trylock(struct semaphore *sem)
-{
- int ret;
- unsigned long flags;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- ret = 1;
- if (atomic_read(&sem->waking) > 0) {
- atomic_dec(&sem->waking);
- ret = 0;
- } else
- atomic_inc(&sem->count);
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-#endif
diff --git a/include/asm-m68knommu/semaphore.h b/include/asm-m68knommu/semaphore.h
index 5779eb6..d9b2034 100644
--- a/include/asm-m68knommu/semaphore.h
+++ b/include/asm-m68knommu/semaphore.h
@@ -1,153 +1 @@
-#ifndef _M68K_SEMAPHORE_H
-#define _M68K_SEMAPHORE_H
-
-#define RW_LOCK_BIAS 0x01000000
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-
-/*
- * Interrupt-safe semaphores..
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * m68k version by Andreas Schwab
- */
-
-
-struct semaphore {
- atomic_t count;
- atomic_t waking;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .waking = ATOMIC_INIT(0), \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- *sem = (struct semaphore)__SEMAPHORE_INITIALIZER(*sem, val);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-asmlinkage void __down_failed(void /* special register calling convention */);
-asmlinkage int __down_failed_interruptible(void /* params in registers */);
-asmlinkage int __down_failed_trylock(void /* params in registers */);
-asmlinkage void __up_wakeup(void /* special register calling convention */);
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage int __down_trylock(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-extern spinlock_t semaphore_wake_lock;
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "down_failed" is a special asm handler that calls the C
- * routine that actually waits. See arch/m68k/lib/semaphore.S
- */
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
- __asm__ __volatile__(
- "| atomic down operation\n\t"
- "movel %0, %%a1\n\t"
- "lea %%pc@(1f), %%a0\n\t"
- "subql #1, %%a1@\n\t"
- "jmi __down_failed\n"
- "1:"
- : /* no outputs */
- : "g" (sem)
- : "cc", "%a0", "%a1", "memory");
-}
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- int ret;
-
- might_sleep();
- __asm__ __volatile__(
- "| atomic down operation\n\t"
- "movel %1, %%a1\n\t"
- "lea %%pc@(1f), %%a0\n\t"
- "subql #1, %%a1@\n\t"
- "jmi __down_failed_interruptible\n\t"
- "clrl %%d0\n"
- "1: movel %%d0, %0\n"
- : "=d" (ret)
- : "g" (sem)
- : "cc", "%d0", "%a0", "%a1", "memory");
- return(ret);
-}
-
-static inline int down_trylock(struct semaphore * sem)
-{
- register struct semaphore *sem1 __asm__ ("%a1") = sem;
- register int result __asm__ ("%d0");
-
- __asm__ __volatile__(
- "| atomic down trylock operation\n\t"
- "subql #1,%1@\n\t"
- "jmi 2f\n\t"
- "clrl %0\n"
- "1:\n"
- ".section .text.lock,\"ax\"\n"
- ".even\n"
- "2:\tpea 1b\n\t"
- "jbra __down_failed_trylock\n"
- ".previous"
- : "=d" (result)
- : "a" (sem1)
- : "memory");
- return result;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore * sem)
-{
- __asm__ __volatile__(
- "| atomic up operation\n\t"
- "movel %0, %%a1\n\t"
- "lea %%pc@(1f), %%a0\n\t"
- "addql #1, %%a1@\n\t"
- "jle __up_wakeup\n"
- "1:"
- : /* no outputs */
- : "g" (sem)
- : "cc", "%a0", "%a1", "memory");
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h
index 01e7ead..d5c0f2f 100644
--- a/include/asm-mips/cacheflush.h
+++ b/include/asm-mips/cacheflush.h
@@ -63,8 +63,22 @@
}
extern void (*flush_icache_range)(unsigned long start, unsigned long end);
-#define flush_cache_vmap(start, end) flush_cache_all()
-#define flush_cache_vunmap(start, end) flush_cache_all()
+
+extern void (*__flush_cache_vmap)(void);
+
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+ if (cpu_has_dc_aliases)
+ __flush_cache_vmap();
+}
+
+extern void (*__flush_cache_vunmap)(void);
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+ if (cpu_has_dc_aliases)
+ __flush_cache_vunmap();
+}
extern void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
diff --git a/include/asm-mips/kvm.h b/include/asm-mips/kvm.h
new file mode 100644
index 0000000..093a5b7
--- /dev/null
+++ b/include/asm-mips/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_MIPS_H
+#define __LINUX_KVM_MIPS_H
+
+/* mips does not support KVM */
+
+#endif
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index cb18af9..5bb57bf 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -1786,6 +1786,7 @@
char *cpu_name;
unsigned char cpu_od; /* Set Config[OD] */
unsigned char cpu_bclk; /* Enable BCLK switching */
+ unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */
};
extern struct cpu_spec cpu_specs[];
diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h
index e4fe26c..89655c0 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_ide.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h
@@ -122,24 +122,6 @@
};
#endif
-/* function prototyping */
-u8 auide_inb(unsigned long port);
-u16 auide_inw(unsigned long port);
-u32 auide_inl(unsigned long port);
-void auide_insw(unsigned long port, void *addr, u32 count);
-void auide_insl(unsigned long port, void *addr, u32 count);
-void auide_outb(u8 addr, unsigned long port);
-void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port);
-void auide_outw(u16 addr, unsigned long port);
-void auide_outl(u32 addr, unsigned long port);
-void auide_outsw(unsigned long port, void *addr, u32 count);
-void auide_outsl(unsigned long port, void *addr, u32 count);
-static void auide_tune_drive(ide_drive_t *drive, byte pio);
-static int auide_tune_chipset(ide_drive_t *drive, u8 speed);
-static int auide_ddma_init( _auide_hwif *auide );
-static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif);
-int __init auide_probe(void);
-
/*******************************************************************************
* PIO Mode timing calculation : *
* *
diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h
index a6bdac6..d2e28e6 100644
--- a/include/asm-mips/mach-db1x00/db1200.h
+++ b/include/asm-mips/mach-db1x00/db1200.h
@@ -173,8 +173,8 @@
#define AU1XXX_SMC91111_IRQ DB1200_ETH_INT
#define AU1XXX_ATA_PHYS_ADDR (0x18800000)
-#define AU1XXX_ATA_PHYS_LEN (0x100)
-#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_PHYS_LEN (16 << AU1XXX_ATA_REG_OFFSET)
#define AU1XXX_ATA_INT DB1200_IDE_INT
#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
#define AU1XXX_ATA_RQSIZE 128
diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h
index 4ec2b93..0f6c251 100644
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -27,8 +27,6 @@
# endif
#endif
-#define IDE_ARCH_OBSOLETE_DEFAULTS
-
static __inline__ int ide_probe_legacy(void)
{
#ifdef CONFIG_PCI
@@ -98,14 +96,6 @@
}
}
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
-#ifdef CONFIG_BLK_DEV_IDEPCI
-#define ide_init_default_irq(base) (0)
-#else
-#define ide_init_default_irq(base) ide_default_irq(base)
-#endif
-
/* MIPS port and memory-mapped I/O string operations. */
static inline void __ide_flush_prologue(void)
{
diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h
index ed5fd73..edaa489 100644
--- a/include/asm-mips/mach-pb1x00/pb1200.h
+++ b/include/asm-mips/mach-pb1x00/pb1200.h
@@ -186,8 +186,8 @@
#define AU1XXX_SMC91111_IRQ PB1200_ETH_INT
#define AU1XXX_ATA_PHYS_ADDR (0x0C800000)
-#define AU1XXX_ATA_PHYS_LEN (0x100)
-#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_REG_OFFSET (5)
+#define AU1XXX_ATA_PHYS_LEN (16 << AU1XXX_ATA_REG_OFFSET)
#define AU1XXX_ATA_INT PB1200_IDE_INT
#define AU1XXX_ATA_DDMA_REQ DSCR_CMD0_DMA_REQ1;
#define AU1XXX_ATA_RQSIZE 128
@@ -245,7 +245,7 @@
PB1200_SD1_INSERT_INT,
PB1200_SD1_EJECT_INT,
- PB1200_INT_END (PB1200_INT_BEGIN + 15)
+ PB1200_INT_END = PB1200_INT_BEGIN + 15
};
/* For drivers/pcmcia/au1000_db1x00.c */
diff --git a/include/asm-mips/semaphore.h b/include/asm-mips/semaphore.h
index fdf8042..d9b2034 100644
--- a/include/asm-mips/semaphore.h
+++ b/include/asm-mips/semaphore.h
@@ -1,108 +1 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1996 Linus Torvalds
- * Copyright (C) 1998, 99, 2000, 01, 04 Ralf Baechle
- * Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc.
- * Copyright (C) 2000, 01 MIPS Technologies, Inc.
- *
- * In all honesty, little of the old MIPS code left - the PPC64 variant was
- * just looking nice and portable so I ripped it. Credits to whoever wrote
- * it.
- */
-#ifndef __ASM_SEMAPHORE_H
-#define __ASM_SEMAPHORE_H
-
-/*
- * Remove spinlock-based RW semaphores; RW semaphore definitions are
- * now in rwsem.h and we use the generic lib/rwsem.c implementation.
- * Rework semaphores to use atomic_dec_if_positive.
- * -- Paul Mackerras (paulus@samba.org)
- */
-
-#ifdef __KERNEL__
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-struct semaphore {
- /*
- * Note that any negative value of count is equivalent to 0,
- * but additionally indicates that some process(es) might be
- * sleeping on `wait'.
- */
- atomic_t count;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
-
-static inline void sema_init(struct semaphore *sem, int val)
-{
- atomic_set(&sem->count, val);
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX(struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED(struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-extern void __down(struct semaphore * sem);
-extern int __down_interruptible(struct semaphore * sem);
-extern void __up(struct semaphore * sem);
-
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
-
- /*
- * Try to get the semaphore, take the slow path if we fail.
- */
- if (unlikely(atomic_dec_return(&sem->count) < 0))
- __down(sem);
-}
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
-
- might_sleep();
-
- if (unlikely(atomic_dec_return(&sem->count) < 0))
- ret = __down_interruptible(sem);
- return ret;
-}
-
-static inline int down_trylock(struct semaphore * sem)
-{
- return atomic_dec_if_positive(&sem->count) < 0;
-}
-
-static inline void up(struct semaphore * sem)
-{
- if (unlikely(atomic_inc_return(&sem->count) <= 0))
- __up(sem);
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_SEMAPHORE_H */
+#include <linux/semaphore.h>
diff --git a/include/asm-mn10300/kvm.h b/include/asm-mn10300/kvm.h
new file mode 100644
index 0000000..f6b609f
--- /dev/null
+++ b/include/asm-mn10300/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_MN10300_H
+#define __LINUX_KVM_MN10300_H
+
+/* mn10300 does not support KVM */
+
+#endif
diff --git a/include/asm-mn10300/semaphore.h b/include/asm-mn10300/semaphore.h
index 5a9e1ad..d9b2034 100644
--- a/include/asm-mn10300/semaphore.h
+++ b/include/asm-mn10300/semaphore.h
@@ -1,169 +1 @@
-/* MN10300 Semaphores
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_SEMAPHORE_H
-#define _ASM_SEMAPHORE_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/linkage.h>
-#include <linux/wait.h>
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
-
-#define SEMAPHORE_DEBUG 0
-
-/*
- * the semaphore definition
- * - if count is >0 then there are tokens available on the semaphore for down
- * to collect
- * - if count is <=0 then there are no spare tokens, and anyone that wants one
- * must wait
- * - if wait_list is not empty, then there are processes waiting for the
- * semaphore
- */
-struct semaphore {
- atomic_t count; /* it's not really atomic, it's
- * just that certain modules
- * expect to be able to access
- * it directly */
- spinlock_t wait_lock;
- struct list_head wait_list;
-#if SEMAPHORE_DEBUG
- unsigned __magic;
-#endif
-};
-
-#if SEMAPHORE_DEBUG
-# define __SEM_DEBUG_INIT(name) , (long)&(name).__magic
-#else
-# define __SEM_DEBUG_INIT(name)
-#endif
-
-
-#define __SEMAPHORE_INITIALIZER(name, init_count) \
-{ \
- .count = ATOMIC_INIT(init_count), \
- .wait_lock = __SPIN_LOCK_UNLOCKED((name).wait_lock), \
- .wait_list = LIST_HEAD_INIT((name).wait_list) \
- __SEM_DEBUG_INIT(name) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
-#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name, 0)
-
-static inline void sema_init(struct semaphore *sem, int val)
-{
- *sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
-}
-
-static inline void init_MUTEX(struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED(struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-extern void __down(struct semaphore *sem, unsigned long flags);
-extern int __down_interruptible(struct semaphore *sem, unsigned long flags);
-extern void __up(struct semaphore *sem);
-
-static inline void down(struct semaphore *sem)
-{
- unsigned long flags;
- int count;
-
-#if SEMAPHORE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-
- spin_lock_irqsave(&sem->wait_lock, flags);
- count = atomic_read(&sem->count);
- if (likely(count > 0)) {
- atomic_set(&sem->count, count - 1);
- spin_unlock_irqrestore(&sem->wait_lock, flags);
- } else {
- __down(sem, flags);
- }
-}
-
-static inline int down_interruptible(struct semaphore *sem)
-{
- unsigned long flags;
- int count, ret = 0;
-
-#if SEMAPHORE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-
- spin_lock_irqsave(&sem->wait_lock, flags);
- count = atomic_read(&sem->count);
- if (likely(count > 0)) {
- atomic_set(&sem->count, count - 1);
- spin_unlock_irqrestore(&sem->wait_lock, flags);
- } else {
- ret = __down_interruptible(sem, flags);
- }
- return ret;
-}
-
-/*
- * non-blockingly attempt to down() a semaphore.
- * - returns zero if we acquired it
- */
-static inline int down_trylock(struct semaphore *sem)
-{
- unsigned long flags;
- int count, success = 0;
-
-#if SEMAPHORE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-
- spin_lock_irqsave(&sem->wait_lock, flags);
- count = atomic_read(&sem->count);
- if (likely(count > 0)) {
- atomic_set(&sem->count, count - 1);
- success = 1;
- }
- spin_unlock_irqrestore(&sem->wait_lock, flags);
- return !success;
-}
-
-static inline void up(struct semaphore *sem)
-{
- unsigned long flags;
-
-#if SEMAPHORE_DEBUG
- CHECK_MAGIC(sem->__magic);
-#endif
-
- spin_lock_irqsave(&sem->wait_lock, flags);
- if (!list_empty(&sem->wait_list))
- __up(sem);
- else
- atomic_set(&sem->count, atomic_read(&sem->count) + 1);
- spin_unlock_irqrestore(&sem->wait_lock, flags);
-}
-
-static inline int sem_getcount(struct semaphore *sem)
-{
- return atomic_read(&sem->count);
-}
-
-#endif /* __ASSEMBLY__ */
-
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-parisc/ide.h b/include/asm-parisc/ide.h
index be8760f..db0c944 100644
--- a/include/asm-parisc/ide.h
+++ b/include/asm-parisc/ide.h
@@ -17,8 +17,6 @@
#define MAX_HWIFS 2
#endif
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
#define ide_request_irq(irq,hand,flg,dev,id) request_irq((irq),(hand),(flg),(dev),(id))
#define ide_free_irq(irq,dev_id) free_irq((irq), (dev_id))
#define ide_request_region(from,extent,name) request_region((from), (extent), (name))
diff --git a/include/asm-parisc/kvm.h b/include/asm-parisc/kvm.h
new file mode 100644
index 0000000..00cc458
--- /dev/null
+++ b/include/asm-parisc/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_PARISC_H
+#define __LINUX_KVM_PARISC_H
+
+/* parisc does not support KVM */
+
+#endif
diff --git a/include/asm-parisc/semaphore-helper.h b/include/asm-parisc/semaphore-helper.h
deleted file mode 100644
index 387f7c1..0000000
--- a/include/asm-parisc/semaphore-helper.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _ASM_PARISC_SEMAPHORE_HELPER_H
-#define _ASM_PARISC_SEMAPHORE_HELPER_H
-
-/*
- * SMP- and interrupt-safe semaphores helper functions.
- *
- * (C) Copyright 1996 Linus Torvalds
- * (C) Copyright 1999 Andrea Arcangeli
- */
-
-/*
- * These two _must_ execute atomically wrt each other.
- *
- * This is trivially done with load_locked/store_cond,
- * which we have. Let the rest of the losers suck eggs.
- */
-static __inline__ void wake_one_more(struct semaphore * sem)
-{
- atomic_inc((atomic_t *)&sem->waking);
-}
-
-static __inline__ int waking_non_zero(struct semaphore *sem)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->waking > 0) {
- sem->waking--;
- ret = 1;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_interruptible:
- * 1 got the lock
- * 0 go to sleep
- * -EINTR interrupted
- *
- * We must undo the sem->count down_interruptible() increment while we are
- * protected by the spinlock in order to make atomic this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-static __inline__ int waking_non_zero_interruptible(struct semaphore *sem,
- struct task_struct *tsk)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->waking > 0) {
- sem->waking--;
- ret = 1;
- } else if (signal_pending(tsk)) {
- atomic_inc(&sem->count);
- ret = -EINTR;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_trylock:
- * 1 failed to lock
- * 0 got the lock
- *
- * We must undo the sem->count down_trylock() increment while we are
- * protected by the spinlock in order to make atomic this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-static __inline__ int waking_non_zero_trylock(struct semaphore *sem)
-{
- unsigned long flags;
- int ret = 1;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->waking <= 0)
- atomic_inc(&sem->count);
- else {
- sem->waking--;
- ret = 0;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-#endif /* _ASM_PARISC_SEMAPHORE_HELPER_H */
diff --git a/include/asm-parisc/semaphore.h b/include/asm-parisc/semaphore.h
index a16271c..d9b2034 100644
--- a/include/asm-parisc/semaphore.h
+++ b/include/asm-parisc/semaphore.h
@@ -1,145 +1 @@
-/* SMP- and interrupt-safe semaphores.
- * PA-RISC version by Matthew Wilcox
- *
- * Linux/PA-RISC Project (http://www.parisc-linux.org/)
- * Copyright (C) 1996 Linus Torvalds
- * Copyright (C) 1999-2001 Matthew Wilcox < willy at debian d0T org >
- * Copyright (C) 2000 Grant Grundler < grundler a debian org >
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_PARISC_SEMAPHORE_H
-#define _ASM_PARISC_SEMAPHORE_H
-
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-#include <asm/system.h>
-
-/*
- * The `count' is initialised to the number of people who are allowed to
- * take the lock. (Normally we want a mutex, so this is `1'). if
- * `count' is positive, the lock can be taken. if it's 0, no-one is
- * waiting on it. if it's -1, at least one task is waiting.
- */
-struct semaphore {
- spinlock_t sentry;
- int count;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .sentry = SPIN_LOCK_UNLOCKED, \
- .count = n, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-static inline int sem_getcount(struct semaphore *sem)
-{
- return sem->count;
-}
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-/* Semaphores can be `tried' from irq context. So we have to disable
- * interrupts while we're messing with the semaphore. Sorry.
- */
-
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
- spin_lock_irq(&sem->sentry);
- if (sem->count > 0) {
- sem->count--;
- } else {
- __down(sem);
- }
- spin_unlock_irq(&sem->sentry);
-}
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
- might_sleep();
- spin_lock_irq(&sem->sentry);
- if (sem->count > 0) {
- sem->count--;
- } else {
- ret = __down_interruptible(sem);
- }
- spin_unlock_irq(&sem->sentry);
- return ret;
-}
-
-/*
- * down_trylock returns 0 on success, 1 if we failed to get the lock.
- * May not sleep, but must preserve irq state
- */
-static inline int down_trylock(struct semaphore * sem)
-{
- unsigned long flags;
- int count;
-
- spin_lock_irqsave(&sem->sentry, flags);
- count = sem->count - 1;
- if (count >= 0)
- sem->count = count;
- spin_unlock_irqrestore(&sem->sentry, flags);
- return (count < 0);
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- */
-static inline void up(struct semaphore * sem)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&sem->sentry, flags);
- if (sem->count < 0) {
- __up(sem);
- } else {
- sem->count++;
- }
- spin_unlock_irqrestore(&sem->sentry, flags);
-}
-
-#endif /* _ASM_PARISC_SEMAPHORE_H */
+#include <linux/semaphore.h>
diff --git a/include/asm-powerpc/ide.h b/include/asm-powerpc/ide.h
index 6d50310..3d90bf7 100644
--- a/include/asm-powerpc/ide.h
+++ b/include/asm-powerpc/ide.h
@@ -31,39 +31,48 @@
#include <linux/hdreg.h>
#include <linux/ioport.h>
-struct ide_machdep_calls {
- int (*default_irq)(unsigned long base);
- unsigned long (*default_io_base)(int index);
- void (*ide_init_hwif)(hw_regs_t *hw,
- unsigned long data_port,
- unsigned long ctrl_port,
- int *irq);
-};
-
-extern struct ide_machdep_calls ppc_ide_md;
-
-#define IDE_ARCH_OBSOLETE_DEFAULTS
-
+/* FIXME: use ide_platform host driver */
static __inline__ int ide_default_irq(unsigned long base)
{
- if (ppc_ide_md.default_irq)
- return ppc_ide_md.default_irq(base);
+#ifdef CONFIG_PPLUS
+ switch (base) {
+ case 0x1f0: return 14;
+ case 0x170: return 15;
+ }
+#endif
+#ifdef CONFIG_PPC_PREP
+ switch (base) {
+ case 0x1f0: return 13;
+ case 0x170: return 13;
+ case 0x1e8: return 11;
+ case 0x168: return 10;
+ case 0xfff0: return 14; /* MCP(N)750 ide0 */
+ case 0xffe0: return 15; /* MCP(N)750 ide1 */
+ }
+#endif
return 0;
}
+/* FIXME: use ide_platform host driver */
static __inline__ unsigned long ide_default_io_base(int index)
{
- if (ppc_ide_md.default_io_base)
- return ppc_ide_md.default_io_base(index);
+#ifdef CONFIG_PPLUS
+ switch (index) {
+ case 0: return 0x1f0;
+ case 1: return 0x170;
+ }
+#endif
+#ifdef CONFIG_PPC_PREP
+ switch (index) {
+ case 0: return 0x1f0;
+ case 1: return 0x170;
+ case 2: return 0x1e8;
+ case 3: return 0x168;
+ }
+#endif
return 0;
}
-#ifdef CONFIG_PCI
-#define ide_init_default_irq(base) (0)
-#else
-#define ide_init_default_irq(base) ide_default_irq(base)
-#endif
-
#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
#define IDE_ARCH_ACK_INTR 1
#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
@@ -71,8 +80,6 @@
#endif /* __powerpc64__ */
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_IDE_H */
diff --git a/include/asm-powerpc/kvm.h b/include/asm-powerpc/kvm.h
new file mode 100644
index 0000000..d1b530f
--- /dev/null
+++ b/include/asm-powerpc/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_POWERPC_H
+#define __LINUX_KVM_POWERPC_H
+
+/* powerpc does not support KVM */
+
+#endif
diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h
index de83fe1..df111c3 100644
--- a/include/asm-powerpc/mediabay.h
+++ b/include/asm-powerpc/mediabay.h
@@ -22,10 +22,14 @@
/* Number of bays in the machine or 0 */
extern int media_bay_count;
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
+#include <linux/ide.h>
+
int check_media_bay_by_base(unsigned long base, int what);
/* called by IDE PMAC host driver to register IDE controller for media bay */
int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
- int irq, int index);
+ int irq, ide_hwif_t *hwif);
+#endif
#endif /* __KERNEL__ */
#endif /* _PPC_MEDIABAY_H */
diff --git a/include/asm-powerpc/semaphore.h b/include/asm-powerpc/semaphore.h
index 48dd32e..d9b2034 100644
--- a/include/asm-powerpc/semaphore.h
+++ b/include/asm-powerpc/semaphore.h
@@ -1,94 +1 @@
-#ifndef _ASM_POWERPC_SEMAPHORE_H
-#define _ASM_POWERPC_SEMAPHORE_H
-
-/*
- * Remove spinlock-based RW semaphores; RW semaphore definitions are
- * now in rwsem.h and we use the generic lib/rwsem.c implementation.
- * Rework semaphores to use atomic_dec_if_positive.
- * -- Paul Mackerras (paulus@samba.org)
- */
-
-#ifdef __KERNEL__
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-struct semaphore {
- /*
- * Note that any negative value of count is equivalent to 0,
- * but additionally indicates that some process(es) might be
- * sleeping on `wait'.
- */
- atomic_t count;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- atomic_set(&sem->count, val);
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-extern void __down(struct semaphore * sem);
-extern int __down_interruptible(struct semaphore * sem);
-extern void __up(struct semaphore * sem);
-
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
-
- /*
- * Try to get the semaphore, take the slow path if we fail.
- */
- if (unlikely(atomic_dec_return(&sem->count) < 0))
- __down(sem);
-}
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
-
- might_sleep();
-
- if (unlikely(atomic_dec_return(&sem->count) < 0))
- ret = __down_interruptible(sem);
- return ret;
-}
-
-static inline int down_trylock(struct semaphore * sem)
-{
- return atomic_dec_if_positive(&sem->count) < 0;
-}
-
-static inline void up(struct semaphore * sem)
-{
- if (unlikely(atomic_inc_return(&sem->count) <= 0))
- __up(sem);
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_POWERPC_SEMAPHORE_H */
+#include <linux/semaphore.h>
diff --git a/include/asm-s390/cio.h b/include/asm-s390/cio.h
index 123b557..0818ecd 100644
--- a/include/asm-s390/cio.h
+++ b/include/asm-s390/cio.h
@@ -397,6 +397,10 @@
extern int cio_get_iplinfo(struct cio_iplinfo *iplinfo);
+/* Function from drivers/s390/cio/chsc.c */
+int chsc_sstpc(void *page, unsigned int op, u16 ctrl);
+int chsc_sstpi(void *page, void *result, size_t size);
+
#endif
#endif
diff --git a/include/asm-s390/cpu.h b/include/asm-s390/cpu.h
index 352dde1..e5a6a9b 100644
--- a/include/asm-s390/cpu.h
+++ b/include/asm-s390/cpu.h
@@ -22,4 +22,12 @@
DECLARE_PER_CPU(struct s390_idle_data, s390_idle);
+void s390_idle_leave(void);
+
+static inline void s390_idle_check(void)
+{
+ if ((&__get_cpu_var(s390_idle))->in_idle)
+ s390_idle_leave();
+}
+
#endif /* _ASM_S390_CPU_H_ */
diff --git a/include/asm-s390/debug.h b/include/asm-s390/debug.h
index c00dd2b..335baf4 100644
--- a/include/asm-s390/debug.h
+++ b/include/asm-s390/debug.h
@@ -73,6 +73,7 @@
struct dentry* debugfs_entries[DEBUG_MAX_VIEWS];
struct debug_view* views[DEBUG_MAX_VIEWS];
char name[DEBUG_MAX_NAME_LEN];
+ mode_t mode;
} debug_info_t;
typedef int (debug_header_proc_t) (debug_info_t* id,
@@ -122,6 +123,10 @@
debug_info_t* debug_register(char* name, int pages, int nr_areas,
int buf_size);
+debug_info_t *debug_register_mode(char *name, int pages, int nr_areas,
+ int buf_size, mode_t mode, uid_t uid,
+ gid_t gid);
+
void debug_unregister(debug_info_t* id);
void debug_set_level(debug_info_t* id, int new_level);
diff --git a/include/asm-s390/extmem.h b/include/asm-s390/extmem.h
index c8802c9..33837d7 100644
--- a/include/asm-s390/extmem.h
+++ b/include/asm-s390/extmem.h
@@ -22,11 +22,12 @@
#define SEGMENT_SHARED 0
#define SEGMENT_EXCLUSIVE 1
-extern int segment_load (char *name,int segtype,unsigned long *addr,unsigned long *length);
-extern void segment_unload(char *name);
-extern void segment_save(char *name);
-extern int segment_type (char* name);
-extern int segment_modify_shared (char *name, int do_nonshared);
+int segment_load (char *name, int segtype, unsigned long *addr, unsigned long *length);
+void segment_unload(char *name);
+void segment_save(char *name);
+int segment_type (char* name);
+int segment_modify_shared (char *name, int do_nonshared);
+void segment_warning(int rc, char *seg_name);
#endif
#endif
diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h
index 31beb18..4b7cb96 100644
--- a/include/asm-s390/hardirq.h
+++ b/include/asm-s390/hardirq.h
@@ -32,6 +32,6 @@
#define HARDIRQ_BITS 8
-extern void account_ticks(u64 time);
+void clock_comparator_work(void);
#endif /* __ASM_HARDIRQ_H */
diff --git a/include/asm-s390/kvm.h b/include/asm-s390/kvm.h
new file mode 100644
index 0000000..573f2a3
--- /dev/null
+++ b/include/asm-s390/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_S390_H
+#define __LINUX_KVM_S390_H
+
+/* s390 does not support KVM */
+
+#endif
diff --git a/include/asm-s390/lowcore.h b/include/asm-s390/lowcore.h
index 801a6fd..5de3efb 100644
--- a/include/asm-s390/lowcore.h
+++ b/include/asm-s390/lowcore.h
@@ -56,6 +56,8 @@
#define __LC_IO_INT_WORD 0x0C0
#define __LC_MCCK_CODE 0x0E8
+#define __LC_LAST_BREAK 0x110
+
#define __LC_RETURN_PSW 0x200
#define __LC_SAVE_AREA 0xC00
@@ -80,7 +82,6 @@
#define __LC_CPUID 0xC60
#define __LC_CPUADDR 0xC68
#define __LC_IPLDEV 0xC7C
-#define __LC_JIFFY_TIMER 0xC80
#define __LC_CURRENT 0xC90
#define __LC_INT_CLOCK 0xC98
#else /* __s390x__ */
@@ -103,7 +104,6 @@
#define __LC_CPUID 0xD80
#define __LC_CPUADDR 0xD88
#define __LC_IPLDEV 0xDB8
-#define __LC_JIFFY_TIMER 0xDC0
#define __LC_CURRENT 0xDD8
#define __LC_INT_CLOCK 0xDE8
#endif /* __s390x__ */
@@ -276,7 +276,7 @@
/* entry.S sensitive area end */
/* SMP info area: defined by DJB */
- __u64 jiffy_timer; /* 0xc80 */
+ __u64 clock_comparator; /* 0xc80 */
__u32 ext_call_fast; /* 0xc88 */
__u32 percpu_offset; /* 0xc8c */
__u32 current_task; /* 0xc90 */
@@ -368,11 +368,12 @@
/* entry.S sensitive area end */
/* SMP info area: defined by DJB */
- __u64 jiffy_timer; /* 0xdc0 */
+ __u64 clock_comparator; /* 0xdc0 */
__u64 ext_call_fast; /* 0xdc8 */
__u64 percpu_offset; /* 0xdd0 */
__u64 current_task; /* 0xdd8 */
- __u64 softirq_pending; /* 0xde0 */
+ __u32 softirq_pending; /* 0xde0 */
+ __u32 pad_0x0de4; /* 0xde4 */
__u64 int_clock; /* 0xde8 */
__u8 pad12[0xe00-0xdf0]; /* 0xdf0 */
diff --git a/include/asm-s390/processor.h b/include/asm-s390/processor.h
index 51d8891..8eaf343 100644
--- a/include/asm-s390/processor.h
+++ b/include/asm-s390/processor.h
@@ -175,6 +175,13 @@
extern void show_registers(struct pt_regs *regs);
extern void show_code(struct pt_regs *regs);
extern void show_trace(struct task_struct *task, unsigned long *sp);
+#ifdef CONFIG_64BIT
+extern void show_last_breaking_event(struct pt_regs *regs);
+#else
+static inline void show_last_breaking_event(struct pt_regs *regs)
+{
+}
+#endif
unsigned long get_wchan(struct task_struct *p);
#define task_pt_regs(tsk) ((struct pt_regs *) \
diff --git a/include/asm-s390/semaphore.h b/include/asm-s390/semaphore.h
index 0e7001a..d9b2034 100644
--- a/include/asm-s390/semaphore.h
+++ b/include/asm-s390/semaphore.h
@@ -1,107 +1 @@
-/*
- * include/asm-s390/semaphore.h
- *
- * S390 version
- * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *
- * Derived from "include/asm-i386/semaphore.h"
- * (C) Copyright 1996 Linus Torvalds
- */
-
-#ifndef _S390_SEMAPHORE_H
-#define _S390_SEMAPHORE_H
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-struct semaphore {
- /*
- * Note that any negative value of count is equivalent to 0,
- * but additionally indicates that some process(es) might be
- * sleeping on `wait'.
- */
- atomic_t count;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name,count) \
- { ATOMIC_INIT(count), __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) }
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- atomic_set(&sem->count, val);
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage int __down_trylock(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
- if (atomic_dec_return(&sem->count) < 0)
- __down(sem);
-}
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
-
- might_sleep();
- if (atomic_dec_return(&sem->count) < 0)
- ret = __down_interruptible(sem);
- return ret;
-}
-
-static inline int down_trylock(struct semaphore * sem)
-{
- int old_val, new_val;
-
- /*
- * This inline assembly atomically implements the equivalent
- * to the following C code:
- * old_val = sem->count.counter;
- * if ((new_val = old_val) > 0)
- * sem->count.counter = --new_val;
- * In the ppc code this is called atomic_dec_if_positive.
- */
- asm volatile(
- " l %0,0(%3)\n"
- "0: ltr %1,%0\n"
- " jle 1f\n"
- " ahi %1,-1\n"
- " cs %0,%1,0(%3)\n"
- " jl 0b\n"
- "1:"
- : "=&d" (old_val), "=&d" (new_val), "=m" (sem->count.counter)
- : "a" (&sem->count.counter), "m" (sem->count.counter)
- : "cc", "memory");
- return old_val <= 0;
-}
-
-static inline void up(struct semaphore * sem)
-{
- if (atomic_inc_return(&sem->count) <= 0)
- __up(sem);
-}
-
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-s390/smp.h b/include/asm-s390/smp.h
index c7b7432..6f3821a 100644
--- a/include/asm-s390/smp.h
+++ b/include/asm-s390/smp.h
@@ -90,6 +90,9 @@
extern void cpu_die (void) __attribute__ ((noreturn));
extern int __cpu_up (unsigned int cpu);
+extern struct mutex smp_cpu_state_mutex;
+extern int smp_cpu_polarization[];
+
extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *),
void *info, int wait);
#endif
diff --git a/include/asm-s390/sysinfo.h b/include/asm-s390/sysinfo.h
new file mode 100644
index 0000000..abe10ae
--- /dev/null
+++ b/include/asm-s390/sysinfo.h
@@ -0,0 +1,116 @@
+/*
+ * definition for store system information stsi
+ *
+ * Copyright IBM Corp. 2001,2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ * Author(s): Ulrich Weigand <weigand@de.ibm.com>
+ * Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+
+struct sysinfo_1_1_1 {
+ char reserved_0[32];
+ char manufacturer[16];
+ char type[4];
+ char reserved_1[12];
+ char model_capacity[16];
+ char sequence[16];
+ char plant[4];
+ char model[16];
+ char model_perm_cap[16];
+ char model_temp_cap[16];
+ char model_cap_rating[4];
+ char model_perm_cap_rating[4];
+ char model_temp_cap_rating[4];
+};
+
+struct sysinfo_1_2_1 {
+ char reserved_0[80];
+ char sequence[16];
+ char plant[4];
+ char reserved_1[2];
+ unsigned short cpu_address;
+};
+
+struct sysinfo_1_2_2 {
+ char format;
+ char reserved_0[1];
+ unsigned short acc_offset;
+ char reserved_1[24];
+ unsigned int secondary_capability;
+ unsigned int capability;
+ unsigned short cpus_total;
+ unsigned short cpus_configured;
+ unsigned short cpus_standby;
+ unsigned short cpus_reserved;
+ unsigned short adjustment[0];
+};
+
+struct sysinfo_1_2_2_extension {
+ unsigned int alt_capability;
+ unsigned short alt_adjustment[0];
+};
+
+struct sysinfo_2_2_1 {
+ char reserved_0[80];
+ char sequence[16];
+ char plant[4];
+ unsigned short cpu_id;
+ unsigned short cpu_address;
+};
+
+struct sysinfo_2_2_2 {
+ char reserved_0[32];
+ unsigned short lpar_number;
+ char reserved_1;
+ unsigned char characteristics;
+ unsigned short cpus_total;
+ unsigned short cpus_configured;
+ unsigned short cpus_standby;
+ unsigned short cpus_reserved;
+ char name[8];
+ unsigned int caf;
+ char reserved_2[16];
+ unsigned short cpus_dedicated;
+ unsigned short cpus_shared;
+};
+
+#define LPAR_CHAR_DEDICATED (1 << 7)
+#define LPAR_CHAR_SHARED (1 << 6)
+#define LPAR_CHAR_LIMITED (1 << 5)
+
+struct sysinfo_3_2_2 {
+ char reserved_0[31];
+ unsigned char count;
+ struct {
+ char reserved_0[4];
+ unsigned short cpus_total;
+ unsigned short cpus_configured;
+ unsigned short cpus_standby;
+ unsigned short cpus_reserved;
+ char name[8];
+ unsigned int caf;
+ char cpi[16];
+ char reserved_1[24];
+
+ } vm[8];
+};
+
+static inline int stsi(void *sysinfo, int fc, int sel1, int sel2)
+{
+ register int r0 asm("0") = (fc << 28) | sel1;
+ register int r1 asm("1") = sel2;
+
+ asm volatile(
+ " stsi 0(%2)\n"
+ "0: jz 2f\n"
+ "1: lhi %0,%3\n"
+ "2:\n"
+ EX_TABLE(0b, 1b)
+ : "+d" (r0) : "d" (r1), "a" (sysinfo), "K" (-ENOSYS)
+ : "cc", "memory");
+ return r0;
+}
diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h
index 15aba30..92098df 100644
--- a/include/asm-s390/system.h
+++ b/include/asm-s390/system.h
@@ -406,6 +406,8 @@
#define local_mcck_enable() __set_psw_mask(psw_kernel_bits)
#define local_mcck_disable() __set_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK)
+int stfle(unsigned long long *list, int doublewords);
+
#ifdef CONFIG_SMP
extern void smp_ctl_set_bit(int cr, int bit);
diff --git a/include/asm-s390/timex.h b/include/asm-s390/timex.h
index 98229db..d744c3d 100644
--- a/include/asm-s390/timex.h
+++ b/include/asm-s390/timex.h
@@ -62,16 +62,18 @@
return clk;
}
-static inline void get_clock_extended(void *dest)
+static inline unsigned long long get_clock_xt(void)
{
- typedef struct { unsigned long long clk[2]; } __clock_t;
+ unsigned char clk[16];
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
- asm volatile("stcke %0" : "=Q" (*((__clock_t *)dest)) : : "cc");
+ asm volatile("stcke %0" : "=Q" (clk) : : "cc");
#else /* __GNUC__ */
- asm volatile("stcke 0(%1)" : "=m" (*((__clock_t *)dest))
- : "a" ((__clock_t *)dest) : "cc");
+ asm volatile("stcke 0(%1)" : "=m" (clk)
+ : "a" (clk) : "cc");
#endif /* __GNUC__ */
+
+ return *((unsigned long long *)&clk[1]);
}
static inline cycles_t get_cycles(void)
@@ -81,5 +83,6 @@
int get_sync_clock(unsigned long long *clock);
void init_cpu_timer(void);
+unsigned long long monotonic_clock(void);
#endif
diff --git a/include/asm-s390/tlbflush.h b/include/asm-s390/tlbflush.h
index 35fb4f9..9e57a93 100644
--- a/include/asm-s390/tlbflush.h
+++ b/include/asm-s390/tlbflush.h
@@ -13,12 +13,14 @@
asm volatile("ptlb" : : : "memory");
}
+#ifdef CONFIG_SMP
/*
* Flush all tlb entries on all cpus.
*/
+void smp_ptlb_all(void);
+
static inline void __tlb_flush_global(void)
{
- extern void smp_ptlb_all(void);
register unsigned long reg2 asm("2");
register unsigned long reg3 asm("3");
register unsigned long reg4 asm("4");
@@ -39,6 +41,25 @@
: : "d" (reg2), "d" (reg3), "d" (reg4), "m" (dummy) : "cc" );
}
+static inline void __tlb_flush_full(struct mm_struct *mm)
+{
+ cpumask_t local_cpumask;
+
+ preempt_disable();
+ /*
+ * If the process only ran on the local cpu, do a local flush.
+ */
+ local_cpumask = cpumask_of_cpu(smp_processor_id());
+ if (cpus_equal(mm->cpu_vm_mask, local_cpumask))
+ __tlb_flush_local();
+ else
+ __tlb_flush_global();
+ preempt_enable();
+}
+#else
+#define __tlb_flush_full(mm) __tlb_flush_local()
+#endif
+
/*
* Flush all tlb entries of a page table on all cpus.
*/
@@ -51,8 +72,6 @@
static inline void __tlb_flush_mm(struct mm_struct * mm)
{
- cpumask_t local_cpumask;
-
if (unlikely(cpus_empty(mm->cpu_vm_mask)))
return;
/*
@@ -69,16 +88,7 @@
mm->context.asce_bits);
return;
}
- preempt_disable();
- /*
- * If the process only ran on the local cpu, do a local flush.
- */
- local_cpumask = cpumask_of_cpu(smp_processor_id());
- if (cpus_equal(mm->cpu_vm_mask, local_cpumask))
- __tlb_flush_local();
- else
- __tlb_flush_global();
- preempt_enable();
+ __tlb_flush_full(mm);
}
static inline void __tlb_flush_mm_cond(struct mm_struct * mm)
diff --git a/include/asm-s390/topology.h b/include/asm-s390/topology.h
index 613aa64..8e97b06 100644
--- a/include/asm-s390/topology.h
+++ b/include/asm-s390/topology.h
@@ -1,6 +1,29 @@
#ifndef _ASM_S390_TOPOLOGY_H
#define _ASM_S390_TOPOLOGY_H
+#include <linux/cpumask.h>
+
+#define mc_capable() (1)
+
+cpumask_t cpu_coregroup_map(unsigned int cpu);
+
+int topology_set_cpu_management(int fc);
+void topology_schedule_update(void);
+
+#define POLARIZATION_UNKNWN (-1)
+#define POLARIZATION_HRZ (0)
+#define POLARIZATION_VL (1)
+#define POLARIZATION_VM (2)
+#define POLARIZATION_VH (3)
+
+#ifdef CONFIG_SMP
+void s390_init_cpu_topology(void);
+#else
+static inline void s390_init_cpu_topology(void)
+{
+};
+#endif
+
#include <asm-generic/topology.h>
#endif /* _ASM_S390_TOPOLOGY_H */
diff --git a/include/asm-sh/floppy.h b/include/asm-sh/floppy.h
deleted file mode 100644
index 59fbfdc..0000000
--- a/include/asm-sh/floppy.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * Architecture specific parts of the Floppy driver
- * include/asm-i386/floppy.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifndef __ASM_SH_FLOPPY_H
-#define __ASM_SH_FLOPPY_H
-
-#include <linux/vmalloc.h>
-
-
-/*
- * The DMA channel used by the floppy controller cannot access data at
- * addresses >= 16MB
- *
- * Went back to the 1MB limit, as some people had problems with the floppy
- * driver otherwise. It doesn't matter much for performance anyway, as most
- * floppy accesses go through the track buffer.
- */
-#define _CROSS_64KB(a,s,vdma) \
-(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-
-#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
-
-
-#define SW fd_routine[use_virtual_dma&1]
-#define CSW fd_routine[can_use_virtual_dma & 1]
-
-
-#define fd_inb(port) inb_p(port)
-#define fd_outb(value,port) outb_p(value,port)
-
-#define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy")
-#define fd_free_dma() CSW._free_dma(FLOPPY_DMA)
-#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
-#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
-#define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA)
-#define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size)
-#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
-
-#define FLOPPY_CAN_FALLBACK_ON_NODMA
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_pdma;
-
-static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
-{
- register unsigned char st;
-
-#undef TRACE_FLPY_INT
-
-#ifdef TRACE_FLPY_INT
- static int calls=0;
- static int bytes=0;
- static int dma_wait=0;
-#endif
- if(!doing_pdma) {
- floppy_interrupt(irq, dev_id, regs);
- return;
- }
-
-#ifdef TRACE_FLPY_INT
- if(!calls)
- bytes = virtual_dma_count;
-#endif
-
- {
- register int lcount;
- register char *lptr;
-
- st = 1;
- for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
- lcount; lcount--, lptr++) {
- st=inb(virtual_dma_port+4) & 0xa0 ;
- if(st != 0xa0)
- break;
- if(virtual_dma_mode)
- outb_p(*lptr, virtual_dma_port+5);
- else
- *lptr = inb_p(virtual_dma_port+5);
- }
- virtual_dma_count = lcount;
- virtual_dma_addr = lptr;
- st = inb(virtual_dma_port+4);
- }
-
-#ifdef TRACE_FLPY_INT
- calls++;
-#endif
- if(st == 0x20)
- return;
- if(!(st & 0x20)) {
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-#ifdef TRACE_FLPY_INT
- printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
- virtual_dma_count, virtual_dma_residue, calls, bytes,
- dma_wait);
- calls = 0;
- dma_wait=0;
-#endif
- doing_pdma = 0;
- floppy_interrupt(irq, dev_id, regs);
- return;
- }
-#ifdef TRACE_FLPY_INT
- if(!virtual_dma_count)
- dma_wait++;
-#endif
-}
-
-static void fd_disable_dma(void)
-{
- if(! (can_use_virtual_dma & 1))
- disable_dma(FLOPPY_DMA);
- doing_pdma = 0;
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-}
-
-static int vdma_request_dma(unsigned int dmanr, const char * device_id)
-{
- return 0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
- return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
- if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,
- IRQF_DISABLED, "floppy", NULL);
- else
- return request_irq(FLOPPY_IRQ, floppy_interrupt,
- IRQF_DISABLED, "floppy", NULL);
-}
-
-static unsigned long dma_mem_alloc(unsigned long size)
-{
- return __get_dma_pages(GFP_KERNEL,get_order(size));
-}
-
-
-static unsigned long vdma_mem_alloc(unsigned long size)
-{
- return (unsigned long) vmalloc(size);
-
-}
-
-#define nodma_mem_alloc(size) vdma_mem_alloc(size)
-
-static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
-{
- if((unsigned int) addr >= (unsigned int) high_memory)
- return vfree((void *)addr);
- else
- free_pages(addr, get_order(size));
-}
-
-#define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size)
-
-static void _fd_chose_dma_mode(char *addr, unsigned long size)
-{
- if(can_use_virtual_dma == 2) {
- if((unsigned int) addr >= (unsigned int) high_memory ||
- virt_to_phys(addr) >= 0x10000000)
- use_virtual_dma = 1;
- else
- use_virtual_dma = 0;
- } else {
- use_virtual_dma = can_use_virtual_dma & 1;
- }
-}
-
-#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
-
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
- doing_pdma = 1;
- virtual_dma_port = io;
- virtual_dma_mode = (mode == DMA_MODE_WRITE);
- virtual_dma_addr = addr;
- virtual_dma_count = size;
- virtual_dma_residue = 0;
- return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-#ifdef FLOPPY_SANITY_CHECK
- if (CROSS_64KB(addr, size)) {
- printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
- return -1;
- }
-#endif
-
- __flush_purge_region(addr, size);
-
- /* actual, physical DMA */
- doing_pdma = 0;
- clear_dma_ff(FLOPPY_DMA);
- set_dma_mode(FLOPPY_DMA,mode);
- set_dma_addr(FLOPPY_DMA,virt_to_phys(addr));
- set_dma_count(FLOPPY_DMA,size);
- enable_dma(FLOPPY_DMA);
- return 0;
-}
-
-static struct fd_routine_l {
- int (*_request_dma)(unsigned int dmanr, const char * device_id);
- void (*_free_dma)(unsigned int dmanr);
- int (*_get_dma_residue)(unsigned int dummy);
- unsigned long (*_dma_mem_alloc) (unsigned long size);
- int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-} fd_routine[] = {
- {
- request_dma,
- free_dma,
- get_dma_residue,
- dma_mem_alloc,
- hard_dma_setup
- },
- {
- vdma_request_dma,
- vdma_nop,
- vdma_get_dma_residue,
- vdma_mem_alloc,
- vdma_dma_setup
- }
-};
-
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
- * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
- * coincides with another rtc CMOS user. Paul G.
- */
-#define FLOPPY0_TYPE (4)
-#define FLOPPY1_TYPE (0)
-
-#define N_FDC 2
-#define N_DRIVE 8
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* __ASM_SH_FLOPPY_H */
diff --git a/include/asm-sh/fpu.h b/include/asm-sh/fpu.h
index f842988..91462fe 100644
--- a/include/asm-sh/fpu.h
+++ b/include/asm-sh/fpu.h
@@ -1,9 +1,8 @@
#ifndef __ASM_SH_FPU_H
#define __ASM_SH_FPU_H
-#define SR_FD 0x00008000
-
#ifndef __ASSEMBLY__
+#include <linux/preempt.h>
#include <asm/ptrace.h>
#ifdef CONFIG_SH_FPU
@@ -21,25 +20,35 @@
extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
#else
+
#define release_fpu(regs) do { } while (0)
#define grab_fpu(regs) do { } while (0)
-#define save_fpu(tsk, regs) do { } while (0)
+
+static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+ clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+}
#endif
extern int do_fpu_inst(unsigned short, struct pt_regs *);
-#define unlazy_fpu(tsk, regs) do { \
- if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \
- save_fpu(tsk, regs); \
- } \
-} while (0)
+static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+ preempt_disable();
+ if (test_tsk_thread_flag(tsk, TIF_USEDFPU))
+ save_fpu(tsk, regs);
+ preempt_enable();
+}
-#define clear_fpu(tsk, regs) do { \
- if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \
- clear_tsk_thread_flag(tsk, TIF_USEDFPU); \
- release_fpu(regs); \
- } \
-} while (0)
+static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+ preempt_disable();
+ if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
+ clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+ release_fpu(regs);
+ }
+ preempt_enable();
+}
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-sh/ide.h b/include/asm-sh/ide.h
index 9f8e914..58e0bdd 100644
--- a/include/asm-sh/ide.h
+++ b/include/asm-sh/ide.h
@@ -14,9 +14,6 @@
#ifdef __KERNEL__
-
-#define ide_default_io_ctl(base) (0)
-
#include <asm-generic/ide_iops.h>
#endif /* __KERNEL__ */
diff --git a/include/asm-sh/kvm.h b/include/asm-sh/kvm.h
new file mode 100644
index 0000000..6af51db
--- /dev/null
+++ b/include/asm-sh/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_SH_H
+#define __LINUX_KVM_SH_H
+
+/* sh does not support KVM */
+
+#endif
diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h
index 19fe47c..ec707b9 100644
--- a/include/asm-sh/processor.h
+++ b/include/asm-sh/processor.h
@@ -2,7 +2,6 @@
#define __ASM_SH_PROCESSOR_H
#include <asm/cpu-features.h>
-#include <asm/fpu.h>
#ifndef __ASSEMBLY__
/*
diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h
index df2d5b0..c09305d 100644
--- a/include/asm-sh/processor_32.h
+++ b/include/asm-sh/processor_32.h
@@ -70,6 +70,7 @@
*/
#define SR_DSP 0x00001000
#define SR_IMASK 0x000000f0
+#define SR_FD 0x00008000
/*
* FPU structure and data
diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h
index eda4bef..88a2edf 100644
--- a/include/asm-sh/processor_64.h
+++ b/include/asm-sh/processor_64.h
@@ -112,6 +112,7 @@
#endif
#define SR_IMASK 0x000000f0
+#define SR_FD 0x00008000
#define SR_SSTEP 0x08000000
#ifndef __ASSEMBLY__
diff --git a/include/asm-sh/semaphore-helper.h b/include/asm-sh/semaphore-helper.h
deleted file mode 100644
index bd8230c..0000000
--- a/include/asm-sh/semaphore-helper.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef __ASM_SH_SEMAPHORE_HELPER_H
-#define __ASM_SH_SEMAPHORE_HELPER_H
-
-/*
- * SMP- and interrupt-safe semaphores helper functions.
- *
- * (C) Copyright 1996 Linus Torvalds
- * (C) Copyright 1999 Andrea Arcangeli
- */
-
-/*
- * These two _must_ execute atomically wrt each other.
- *
- * This is trivially done with load_locked/store_cond,
- * which we have. Let the rest of the losers suck eggs.
- */
-static __inline__ void wake_one_more(struct semaphore * sem)
-{
- atomic_inc((atomic_t *)&sem->sleepers);
-}
-
-static __inline__ int waking_non_zero(struct semaphore *sem)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->sleepers > 0) {
- sem->sleepers--;
- ret = 1;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_interruptible:
- * 1 got the lock
- * 0 go to sleep
- * -EINTR interrupted
- *
- * We must undo the sem->count down_interruptible() increment while we are
- * protected by the spinlock in order to make atomic this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-static __inline__ int waking_non_zero_interruptible(struct semaphore *sem,
- struct task_struct *tsk)
-{
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->sleepers > 0) {
- sem->sleepers--;
- ret = 1;
- } else if (signal_pending(tsk)) {
- atomic_inc(&sem->count);
- ret = -EINTR;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-/*
- * waking_non_zero_trylock:
- * 1 failed to lock
- * 0 got the lock
- *
- * We must undo the sem->count down_trylock() increment while we are
- * protected by the spinlock in order to make atomic this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-static __inline__ int waking_non_zero_trylock(struct semaphore *sem)
-{
- unsigned long flags;
- int ret = 1;
-
- spin_lock_irqsave(&semaphore_wake_lock, flags);
- if (sem->sleepers <= 0)
- atomic_inc(&sem->count);
- else {
- sem->sleepers--;
- ret = 0;
- }
- spin_unlock_irqrestore(&semaphore_wake_lock, flags);
- return ret;
-}
-
-#endif /* __ASM_SH_SEMAPHORE_HELPER_H */
diff --git a/include/asm-sh/semaphore.h b/include/asm-sh/semaphore.h
index 9e5a37c..d9b2034 100644
--- a/include/asm-sh/semaphore.h
+++ b/include/asm-sh/semaphore.h
@@ -1,115 +1 @@
-#ifndef __ASM_SH_SEMAPHORE_H
-#define __ASM_SH_SEMAPHORE_H
-
-#include <linux/linkage.h>
-
-#ifdef __KERNEL__
-/*
- * SMP- and interrupt-safe semaphores.
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * SuperH verison by Niibe Yutaka
- * (Currently no asm implementation but generic C code...)
- */
-
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
-#include <linux/wait.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .sleepers = 0, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
-/*
- * *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
- *
- * i'd rather use the more flexible initialization above, but sadly
- * GCC 2.7.2.3 emits a bogus warning. EGCS doesn't. Oh well.
- */
- atomic_set(&sem->count, val);
- sem->sleepers = 0;
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-#if 0
-asmlinkage void __down_failed(void /* special register calling convention */);
-asmlinkage int __down_failed_interruptible(void /* params in registers */);
-asmlinkage int __down_failed_trylock(void /* params in registers */);
-asmlinkage void __up_wakeup(void /* special register calling convention */);
-#endif
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage int __down_trylock(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-extern spinlock_t semaphore_wake_lock;
-
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
- if (atomic_dec_return(&sem->count) < 0)
- __down(sem);
-}
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
-
- might_sleep();
- if (atomic_dec_return(&sem->count) < 0)
- ret = __down_interruptible(sem);
- return ret;
-}
-
-static inline int down_trylock(struct semaphore * sem)
-{
- int ret = 0;
-
- if (atomic_dec_return(&sem->count) < 0)
- ret = __down_trylock(sem);
- return ret;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- */
-static inline void up(struct semaphore * sem)
-{
- if (atomic_inc_return(&sem->count) <= 0)
- __up(sem);
-}
-
-#endif
-#endif /* __ASM_SH_SEMAPHORE_H */
+#include <linux/semaphore.h>
diff --git a/include/asm-sparc/ide.h b/include/asm-sparc/ide.h
index 4076cb5..afd1736 100644
--- a/include/asm-sparc/ide.h
+++ b/include/asm-sparc/ide.h
@@ -17,8 +17,6 @@
#undef MAX_HWIFS
#define MAX_HWIFS 2
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
#define __ide_insl(data_reg, buffer, wcount) \
__ide_insw(data_reg, buffer, (wcount)<<1)
#define __ide_outsl(data_reg, buffer, wcount) \
diff --git a/include/asm-sparc/kvm.h b/include/asm-sparc/kvm.h
new file mode 100644
index 0000000..2e5478da
--- /dev/null
+++ b/include/asm-sparc/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_SPARC_H
+#define __LINUX_KVM_SPARC_H
+
+/* sparc does not support KVM */
+
+#endif
diff --git a/include/asm-sparc/semaphore.h b/include/asm-sparc/semaphore.h
index 8018f9f..d9b2034 100644
--- a/include/asm-sparc/semaphore.h
+++ b/include/asm-sparc/semaphore.h
@@ -1,192 +1 @@
-#ifndef _SPARC_SEMAPHORE_H
-#define _SPARC_SEMAPHORE_H
-
-/* Dinky, good for nothing, just barely irq safe, Sparc semaphores. */
-
-#ifdef __KERNEL__
-
-#include <asm/atomic.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-struct semaphore {
- atomic24_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC24_INIT(n), \
- .sleepers = 0, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- atomic24_set(&sem->count, val);
- sem->sleepers = 0;
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-extern void __down(struct semaphore * sem);
-extern int __down_interruptible(struct semaphore * sem);
-extern int __down_trylock(struct semaphore * sem);
-extern void __up(struct semaphore * sem);
-
-static inline void down(struct semaphore * sem)
-{
- register volatile int *ptr asm("g1");
- register int increment asm("g2");
-
- might_sleep();
-
- ptr = &(sem->count.counter);
- increment = 1;
-
- __asm__ __volatile__(
- "mov %%o7, %%g4\n\t"
- "call ___atomic24_sub\n\t"
- " add %%o7, 8, %%o7\n\t"
- "tst %%g2\n\t"
- "bl 2f\n\t"
- " nop\n"
- "1:\n\t"
- ".subsection 2\n"
- "2:\n\t"
- "save %%sp, -64, %%sp\n\t"
- "mov %%g1, %%l1\n\t"
- "mov %%g5, %%l5\n\t"
- "call %3\n\t"
- " mov %%g1, %%o0\n\t"
- "mov %%l1, %%g1\n\t"
- "ba 1b\n\t"
- " restore %%l5, %%g0, %%g5\n\t"
- ".previous\n"
- : "=&r" (increment)
- : "0" (increment), "r" (ptr), "i" (__down)
- : "g3", "g4", "g7", "memory", "cc");
-}
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- register volatile int *ptr asm("g1");
- register int increment asm("g2");
-
- might_sleep();
-
- ptr = &(sem->count.counter);
- increment = 1;
-
- __asm__ __volatile__(
- "mov %%o7, %%g4\n\t"
- "call ___atomic24_sub\n\t"
- " add %%o7, 8, %%o7\n\t"
- "tst %%g2\n\t"
- "bl 2f\n\t"
- " clr %%g2\n"
- "1:\n\t"
- ".subsection 2\n"
- "2:\n\t"
- "save %%sp, -64, %%sp\n\t"
- "mov %%g1, %%l1\n\t"
- "mov %%g5, %%l5\n\t"
- "call %3\n\t"
- " mov %%g1, %%o0\n\t"
- "mov %%l1, %%g1\n\t"
- "mov %%l5, %%g5\n\t"
- "ba 1b\n\t"
- " restore %%o0, %%g0, %%g2\n\t"
- ".previous\n"
- : "=&r" (increment)
- : "0" (increment), "r" (ptr), "i" (__down_interruptible)
- : "g3", "g4", "g7", "memory", "cc");
-
- return increment;
-}
-
-static inline int down_trylock(struct semaphore * sem)
-{
- register volatile int *ptr asm("g1");
- register int increment asm("g2");
-
- ptr = &(sem->count.counter);
- increment = 1;
-
- __asm__ __volatile__(
- "mov %%o7, %%g4\n\t"
- "call ___atomic24_sub\n\t"
- " add %%o7, 8, %%o7\n\t"
- "tst %%g2\n\t"
- "bl 2f\n\t"
- " clr %%g2\n"
- "1:\n\t"
- ".subsection 2\n"
- "2:\n\t"
- "save %%sp, -64, %%sp\n\t"
- "mov %%g1, %%l1\n\t"
- "mov %%g5, %%l5\n\t"
- "call %3\n\t"
- " mov %%g1, %%o0\n\t"
- "mov %%l1, %%g1\n\t"
- "mov %%l5, %%g5\n\t"
- "ba 1b\n\t"
- " restore %%o0, %%g0, %%g2\n\t"
- ".previous\n"
- : "=&r" (increment)
- : "0" (increment), "r" (ptr), "i" (__down_trylock)
- : "g3", "g4", "g7", "memory", "cc");
-
- return increment;
-}
-
-static inline void up(struct semaphore * sem)
-{
- register volatile int *ptr asm("g1");
- register int increment asm("g2");
-
- ptr = &(sem->count.counter);
- increment = 1;
-
- __asm__ __volatile__(
- "mov %%o7, %%g4\n\t"
- "call ___atomic24_add\n\t"
- " add %%o7, 8, %%o7\n\t"
- "tst %%g2\n\t"
- "ble 2f\n\t"
- " nop\n"
- "1:\n\t"
- ".subsection 2\n"
- "2:\n\t"
- "save %%sp, -64, %%sp\n\t"
- "mov %%g1, %%l1\n\t"
- "mov %%g5, %%l5\n\t"
- "call %3\n\t"
- " mov %%g1, %%o0\n\t"
- "mov %%l1, %%g1\n\t"
- "ba 1b\n\t"
- " restore %%l5, %%g0, %%g5\n\t"
- ".previous\n"
- : "=&r" (increment)
- : "0" (increment), "r" (ptr), "i" (__up)
- : "g3", "g4", "g7", "memory", "cc");
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* !(_SPARC_SEMAPHORE_H) */
+#include <linux/semaphore.h>
diff --git a/include/asm-sparc64/ide.h b/include/asm-sparc64/ide.h
index ac7eb21..c5fdabe 100644
--- a/include/asm-sparc64/ide.h
+++ b/include/asm-sparc64/ide.h
@@ -24,8 +24,6 @@
# endif
#endif
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
#define __ide_insl(data_reg, buffer, wcount) \
__ide_insw(data_reg, buffer, (wcount)<<1)
#define __ide_outsl(data_reg, buffer, wcount) \
diff --git a/include/asm-sparc64/kvm.h b/include/asm-sparc64/kvm.h
new file mode 100644
index 0000000..380537a
--- /dev/null
+++ b/include/asm-sparc64/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_SPARC64_H
+#define __LINUX_KVM_SPARC64_H
+
+/* sparc64 does not support KVM */
+
+#endif
diff --git a/include/asm-sparc64/semaphore.h b/include/asm-sparc64/semaphore.h
index 7f7c0c4..d9b2034 100644
--- a/include/asm-sparc64/semaphore.h
+++ b/include/asm-sparc64/semaphore.h
@@ -1,53 +1 @@
-#ifndef _SPARC64_SEMAPHORE_H
-#define _SPARC64_SEMAPHORE_H
-
-/* These are actually reasonable on the V9.
- *
- * See asm-ppc/semaphore.h for implementation commentary,
- * only sparc64 specific issues are commented here.
- */
-#ifdef __KERNEL__
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-struct semaphore {
- atomic_t count;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, count) \
- { ATOMIC_INIT(count), \
- __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) }
-
-#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- atomic_set(&sem->count, val);
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-extern void up(struct semaphore *sem);
-extern void down(struct semaphore *sem);
-extern int down_trylock(struct semaphore *sem);
-extern int down_interruptible(struct semaphore *sem);
-
-#endif /* __KERNEL__ */
-
-#endif /* !(_SPARC64_SEMAPHORE_H) */
+#include <linux/semaphore.h>
diff --git a/include/asm-um/kvm.h b/include/asm-um/kvm.h
new file mode 100644
index 0000000..66aa770
--- /dev/null
+++ b/include/asm-um/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_UM_H
+#define __LINUX_KVM_UM_H
+
+/* um does not support KVM */
+
+#endif
diff --git a/include/asm-um/semaphore.h b/include/asm-um/semaphore.h
index ff13c34..d9b2034 100644
--- a/include/asm-um/semaphore.h
+++ b/include/asm-um/semaphore.h
@@ -1,6 +1 @@
-#ifndef __UM_SEMAPHORE_H
-#define __UM_SEMAPHORE_H
-
-#include "asm/arch/semaphore.h"
-
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-um/tlb.h b/include/asm-um/tlb.h
index 39fc475..5240fa1 100644
--- a/include/asm-um/tlb.h
+++ b/include/asm-um/tlb.h
@@ -1,6 +1,7 @@
#ifndef __UM_TLB_H
#define __UM_TLB_H
+#include <linux/pagemap.h>
#include <linux/swap.h>
#include <asm/percpu.h>
#include <asm/pgalloc.h>
diff --git a/include/asm-v850/kvm.h b/include/asm-v850/kvm.h
new file mode 100644
index 0000000..3f729b7
--- /dev/null
+++ b/include/asm-v850/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_V850_H
+#define __LINUX_KVM_V850_H
+
+/* v850 does not support KVM */
+
+#endif
diff --git a/include/asm-v850/semaphore.h b/include/asm-v850/semaphore.h
index 10ed0cc..d9b2034 100644
--- a/include/asm-v850/semaphore.h
+++ b/include/asm-v850/semaphore.h
@@ -1,84 +1 @@
-#ifndef __V850_SEMAPHORE_H__
-#define __V850_SEMAPHORE_H__
-
-#include <linux/linkage.h>
-#include <linux/spinlock.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-#include <asm/atomic.h>
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name,count) \
- { ATOMIC_INIT (count), 0, \
- __WAIT_QUEUE_HEAD_INITIALIZER ((name).wait) }
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER (name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC (name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init (sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init (sem, 0);
-}
-
-/*
- * special register calling convention
- */
-asmlinkage void __down_failed (void);
-asmlinkage int __down_interruptible_failed (void);
-asmlinkage int __down_trylock_failed (void);
-asmlinkage void __up_wakeup (void);
-
-extern void __down (struct semaphore * sem);
-extern int __down_interruptible (struct semaphore * sem);
-extern int __down_trylock (struct semaphore * sem);
-extern void __up (struct semaphore * sem);
-
-static inline void down (struct semaphore * sem)
-{
- might_sleep();
- if (atomic_dec_return (&sem->count) < 0)
- __down (sem);
-}
-
-static inline int down_interruptible (struct semaphore * sem)
-{
- int ret = 0;
- might_sleep();
- if (atomic_dec_return (&sem->count) < 0)
- ret = __down_interruptible (sem);
- return ret;
-}
-
-static inline int down_trylock (struct semaphore *sem)
-{
- int ret = 0;
- if (atomic_dec_return (&sem->count) < 0)
- ret = __down_trylock (sem);
- return ret;
-}
-
-static inline void up (struct semaphore * sem)
-{
- if (atomic_inc_return (&sem->count) <= 0)
- __up (sem);
-}
-
-#endif /* __V850_SEMAPHORE_H__ */
+#include <linux/semaphore.h>
diff --git a/include/asm-x86/Kbuild b/include/asm-x86/Kbuild
index 3b8160a..1e35545 100644
--- a/include/asm-x86/Kbuild
+++ b/include/asm-x86/Kbuild
@@ -10,6 +10,7 @@
header-y += ptrace-abi.h
header-y += sigcontext32.h
header-y += ucontext.h
+header-y += processor-flags.h
unifdef-y += e820.h
unifdef-y += ist.h
diff --git a/include/asm-x86/a.out-core.h b/include/asm-x86/a.out-core.h
index d2b6e11..714207a 100644
--- a/include/asm-x86/a.out-core.h
+++ b/include/asm-x86/a.out-core.h
@@ -29,8 +29,9 @@
dump->magic = CMAGIC;
dump->start_code = 0;
dump->start_stack = regs->sp & ~(PAGE_SIZE - 1);
- dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
- dump->u_dsize = ((unsigned long) (current->mm->brk + (PAGE_SIZE-1))) >> PAGE_SHIFT;
+ dump->u_tsize = ((unsigned long)current->mm->end_code) >> PAGE_SHIFT;
+ dump->u_dsize = ((unsigned long)(current->mm->brk + (PAGE_SIZE - 1)))
+ >> PAGE_SHIFT;
dump->u_dsize -= dump->u_tsize;
dump->u_ssize = 0;
dump->u_debugreg[0] = current->thread.debugreg0;
@@ -43,7 +44,8 @@
dump->u_debugreg[7] = current->thread.debugreg7;
if (dump->start_stack < TASK_SIZE)
- dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
+ dump->u_ssize = ((unsigned long)(TASK_SIZE - dump->start_stack))
+ >> PAGE_SHIFT;
dump->regs.bx = regs->bx;
dump->regs.cx = regs->cx;
@@ -55,7 +57,7 @@
dump->regs.ds = (u16)regs->ds;
dump->regs.es = (u16)regs->es;
dump->regs.fs = (u16)regs->fs;
- savesegment(gs,gs);
+ savesegment(gs, gs);
dump->regs.orig_ax = regs->orig_ax;
dump->regs.ip = regs->ip;
dump->regs.cs = (u16)regs->cs;
@@ -63,7 +65,7 @@
dump->regs.sp = regs->sp;
dump->regs.ss = (u16)regs->ss;
- dump->u_fpvalid = dump_fpu (regs, &dump->i387);
+ dump->u_fpvalid = dump_fpu(regs, &dump->i387);
}
#endif /* CONFIG_X86_32 */
diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h
index 7a72d6a..14411c9 100644
--- a/include/asm-x86/acpi.h
+++ b/include/asm-x86/acpi.h
@@ -67,16 +67,16 @@
*/
#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \
asm("divl %2;" \
- :"=a"(q32), "=d"(r32) \
- :"r"(d32), \
+ : "=a"(q32), "=d"(r32) \
+ : "r"(d32), \
"0"(n_lo), "1"(n_hi))
#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \
asm("shrl $1,%2 ;" \
"rcrl $1,%3;" \
- :"=r"(n_hi), "=r"(n_lo) \
- :"0"(n_hi), "1"(n_lo))
+ : "=r"(n_hi), "=r"(n_lo) \
+ : "0"(n_hi), "1"(n_lo))
#ifdef CONFIG_ACPI
extern int acpi_lapic;
diff --git a/include/asm-x86/alternative.h b/include/asm-x86/alternative.h
index d8bacf3..1f6a9ca 100644
--- a/include/asm-x86/alternative.h
+++ b/include/asm-x86/alternative.h
@@ -66,8 +66,8 @@
extern void alternatives_smp_switch(int smp);
#else
static inline void alternatives_smp_module_add(struct module *mod, char *name,
- void *locks, void *locks_end,
- void *text, void *text_end) {}
+ void *locks, void *locks_end,
+ void *text, void *text_end) {}
static inline void alternatives_smp_module_del(struct module *mod) {}
static inline void alternatives_smp_switch(int smp) {}
#endif /* CONFIG_SMP */
@@ -148,14 +148,34 @@
void apply_paravirt(struct paravirt_patch_site *start,
struct paravirt_patch_site *end);
#else
-static inline void
-apply_paravirt(struct paravirt_patch_site *start,
- struct paravirt_patch_site *end)
+static inline void apply_paravirt(struct paravirt_patch_site *start,
+ struct paravirt_patch_site *end)
{}
#define __parainstructions NULL
#define __parainstructions_end NULL
#endif
-extern void text_poke(void *addr, unsigned char *opcode, int len);
+extern void add_nops(void *insns, unsigned int len);
+
+/*
+ * Clear and restore the kernel write-protection flag on the local CPU.
+ * Allows the kernel to edit read-only pages.
+ * Side-effect: any interrupt handler running between save and restore will have
+ * the ability to write to read-only pages.
+ *
+ * Warning:
+ * Code patching in the UP case is safe if NMIs and MCE handlers are stopped and
+ * no thread can be preempted in the instructions being modified (no iret to an
+ * invalid instruction possible) or if the instructions are changed from a
+ * consistent state to another consistent state atomically.
+ * More care must be taken when modifying code in the SMP case because of
+ * Intel's errata.
+ * On the local CPU you need to be protected again NMI or MCE handlers seeing an
+ * inconsistent instruction while you patch.
+ * The _early version expects the memory to already be RW.
+ */
+
+extern void *text_poke(void *addr, const void *opcode, size_t len);
+extern void *text_poke_early(void *addr, const void *opcode, size_t len);
#endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h
index bcfc07f..be9639a 100644
--- a/include/asm-x86/apic.h
+++ b/include/asm-x86/apic.h
@@ -44,7 +44,6 @@
extern int ioapic_force;
extern int disable_apic;
extern int disable_apic_timer;
-extern unsigned boot_cpu_id;
/*
* Basic functions accessing APICs.
@@ -59,6 +58,8 @@
#define setup_secondary_clock setup_secondary_APIC_clock
#endif
+extern int is_vsmp_box(void);
+
static inline void native_apic_write(unsigned long reg, u32 v)
{
*((volatile u32 *)(APIC_BASE + reg)) = v;
@@ -66,7 +67,7 @@
static inline void native_apic_write_atomic(unsigned long reg, u32 v)
{
- (void) xchg((u32*)(APIC_BASE + reg), v);
+ (void)xchg((u32 *)(APIC_BASE + reg), v);
}
static inline u32 native_apic_read(unsigned long reg)
@@ -123,7 +124,7 @@
* On 32bit this is mach-xxx local
*/
#ifdef CONFIG_X86_64
-extern void setup_apic_routing(void);
+extern void early_init_lapic_mapping(void);
#endif
extern u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask);
diff --git a/include/asm-x86/apicdef.h b/include/asm-x86/apicdef.h
index 550af7a..6b9008c 100644
--- a/include/asm-x86/apicdef.h
+++ b/include/asm-x86/apicdef.h
@@ -12,17 +12,15 @@
#define APIC_ID 0x20
-#ifdef CONFIG_X86_64
-# define APIC_ID_MASK (0xFFu<<24)
-# define GET_APIC_ID(x) (((x)>>24)&0xFFu)
-# define SET_APIC_ID(x) (((x)<<24))
-#endif
-
#define APIC_LVR 0x30
#define APIC_LVR_MASK 0xFF00FF
-#define GET_APIC_VERSION(x) ((x)&0xFFu)
-#define GET_APIC_MAXLVT(x) (((x)>>16)&0xFFu)
-#define APIC_INTEGRATED(x) ((x)&0xF0u)
+#define GET_APIC_VERSION(x) ((x) & 0xFFu)
+#define GET_APIC_MAXLVT(x) (((x) >> 16) & 0xFFu)
+#ifdef CONFIG_X86_32
+# define APIC_INTEGRATED(x) ((x) & 0xF0u)
+#else
+# define APIC_INTEGRATED(x) (1)
+#endif
#define APIC_XAPIC(x) ((x) >= 0x14)
#define APIC_TASKPRI 0x80
#define APIC_TPRI_MASK 0xFFu
@@ -33,16 +31,16 @@
#define APIC_EIO_ACK 0x0
#define APIC_RRR 0xC0
#define APIC_LDR 0xD0
-#define APIC_LDR_MASK (0xFFu<<24)
-#define GET_APIC_LOGICAL_ID(x) (((x)>>24)&0xFFu)
-#define SET_APIC_LOGICAL_ID(x) (((x)<<24))
+#define APIC_LDR_MASK (0xFFu << 24)
+#define GET_APIC_LOGICAL_ID(x) (((x) >> 24) & 0xFFu)
+#define SET_APIC_LOGICAL_ID(x) (((x) << 24))
#define APIC_ALL_CPUS 0xFFu
#define APIC_DFR 0xE0
#define APIC_DFR_CLUSTER 0x0FFFFFFFul
#define APIC_DFR_FLAT 0xFFFFFFFFul
#define APIC_SPIV 0xF0
-#define APIC_SPIV_FOCUS_DISABLED (1<<9)
-#define APIC_SPIV_APIC_ENABLED (1<<8)
+#define APIC_SPIV_FOCUS_DISABLED (1 << 9)
+#define APIC_SPIV_APIC_ENABLED (1 << 8)
#define APIC_ISR 0x100
#define APIC_ISR_NR 0x8 /* Number of 32 bit ISR registers. */
#define APIC_TMR 0x180
@@ -78,27 +76,27 @@
#define APIC_DM_EXTINT 0x00700
#define APIC_VECTOR_MASK 0x000FF
#define APIC_ICR2 0x310
-#define GET_APIC_DEST_FIELD(x) (((x)>>24)&0xFF)
-#define SET_APIC_DEST_FIELD(x) ((x)<<24)
+#define GET_APIC_DEST_FIELD(x) (((x) >> 24) & 0xFF)
+#define SET_APIC_DEST_FIELD(x) ((x) << 24)
#define APIC_LVTT 0x320
#define APIC_LVTTHMR 0x330
#define APIC_LVTPC 0x340
#define APIC_LVT0 0x350
-#define APIC_LVT_TIMER_BASE_MASK (0x3<<18)
-#define GET_APIC_TIMER_BASE(x) (((x)>>18)&0x3)
-#define SET_APIC_TIMER_BASE(x) (((x)<<18))
+#define APIC_LVT_TIMER_BASE_MASK (0x3 << 18)
+#define GET_APIC_TIMER_BASE(x) (((x) >> 18) & 0x3)
+#define SET_APIC_TIMER_BASE(x) (((x) << 18))
#define APIC_TIMER_BASE_CLKIN 0x0
#define APIC_TIMER_BASE_TMBASE 0x1
#define APIC_TIMER_BASE_DIV 0x2
-#define APIC_LVT_TIMER_PERIODIC (1<<17)
-#define APIC_LVT_MASKED (1<<16)
-#define APIC_LVT_LEVEL_TRIGGER (1<<15)
-#define APIC_LVT_REMOTE_IRR (1<<14)
-#define APIC_INPUT_POLARITY (1<<13)
-#define APIC_SEND_PENDING (1<<12)
+#define APIC_LVT_TIMER_PERIODIC (1 << 17)
+#define APIC_LVT_MASKED (1 << 16)
+#define APIC_LVT_LEVEL_TRIGGER (1 << 15)
+#define APIC_LVT_REMOTE_IRR (1 << 14)
+#define APIC_INPUT_POLARITY (1 << 13)
+#define APIC_SEND_PENDING (1 << 12)
#define APIC_MODE_MASK 0x700
-#define GET_APIC_DELIVERY_MODE(x) (((x)>>8)&0x7)
-#define SET_APIC_DELIVERY_MODE(x, y) (((x)&~0x700)|((y)<<8))
+#define GET_APIC_DELIVERY_MODE(x) (((x) >> 8) & 0x7)
+#define SET_APIC_DELIVERY_MODE(x, y) (((x) & ~0x700) | ((y) << 8))
#define APIC_MODE_FIXED 0x0
#define APIC_MODE_NMI 0x4
#define APIC_MODE_EXTINT 0x7
@@ -107,7 +105,7 @@
#define APIC_TMICT 0x380
#define APIC_TMCCT 0x390
#define APIC_TDCR 0x3E0
-#define APIC_TDR_DIV_TMBASE (1<<2)
+#define APIC_TDR_DIV_TMBASE (1 << 2)
#define APIC_TDR_DIV_1 0xB
#define APIC_TDR_DIV_2 0x0
#define APIC_TDR_DIV_4 0x1
@@ -117,14 +115,14 @@
#define APIC_TDR_DIV_64 0x9
#define APIC_TDR_DIV_128 0xA
#define APIC_EILVT0 0x500
-#define APIC_EILVT_NR_AMD_K8 1 /* Number of extended interrupts */
+#define APIC_EILVT_NR_AMD_K8 1 /* # of extended interrupts */
#define APIC_EILVT_NR_AMD_10H 4
-#define APIC_EILVT_LVTOFF(x) (((x)>>4)&0xF)
+#define APIC_EILVT_LVTOFF(x) (((x) >> 4) & 0xF)
#define APIC_EILVT_MSG_FIX 0x0
#define APIC_EILVT_MSG_SMI 0x2
#define APIC_EILVT_MSG_NMI 0x4
#define APIC_EILVT_MSG_EXT 0x7
-#define APIC_EILVT_MASKED (1<<16)
+#define APIC_EILVT_MASKED (1 << 16)
#define APIC_EILVT1 0x510
#define APIC_EILVT2 0x520
#define APIC_EILVT3 0x530
@@ -135,7 +133,7 @@
# define MAX_IO_APICS 64
#else
# define MAX_IO_APICS 128
-# define MAX_LOCAL_APIC 256
+# define MAX_LOCAL_APIC 32768
#endif
/*
@@ -408,6 +406,9 @@
#undef u32
-#define BAD_APICID 0xFFu
-
+#ifdef CONFIG_X86_32
+ #define BAD_APICID 0xFFu
+#else
+ #define BAD_APICID 0xFFFFu
+#endif
#endif
diff --git a/include/asm-x86/atomic_32.h b/include/asm-x86/atomic_32.h
index 437aac8..21a4825 100644
--- a/include/asm-x86/atomic_32.h
+++ b/include/asm-x86/atomic_32.h
@@ -15,138 +15,133 @@
* on us. We need to use _exactly_ the address the user gave us,
* not some alias that contains the same information.
*/
-typedef struct { int counter; } atomic_t;
+typedef struct {
+ int counter;
+} atomic_t;
#define ATOMIC_INIT(i) { (i) }
/**
* atomic_read - read atomic variable
* @v: pointer of type atomic_t
- *
+ *
* Atomically reads the value of @v.
- */
+ */
#define atomic_read(v) ((v)->counter)
/**
* atomic_set - set atomic variable
* @v: pointer of type atomic_t
* @i: required value
- *
+ *
* Atomically sets the value of @v to @i.
- */
-#define atomic_set(v,i) (((v)->counter) = (i))
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
/**
* atomic_add - add integer to atomic variable
* @i: integer value to add
* @v: pointer of type atomic_t
- *
+ *
* Atomically adds @i to @v.
*/
-static __inline__ void atomic_add(int i, atomic_t *v)
+static inline void atomic_add(int i, atomic_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "addl %1,%0"
- :"+m" (v->counter)
- :"ir" (i));
+ asm volatile(LOCK_PREFIX "addl %1,%0"
+ : "+m" (v->counter)
+ : "ir" (i));
}
/**
* atomic_sub - subtract integer from atomic variable
* @i: integer value to subtract
* @v: pointer of type atomic_t
- *
+ *
* Atomically subtracts @i from @v.
*/
-static __inline__ void atomic_sub(int i, atomic_t *v)
+static inline void atomic_sub(int i, atomic_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "subl %1,%0"
- :"+m" (v->counter)
- :"ir" (i));
+ asm volatile(LOCK_PREFIX "subl %1,%0"
+ : "+m" (v->counter)
+ : "ir" (i));
}
/**
* atomic_sub_and_test - subtract value from variable and test result
* @i: integer value to subtract
* @v: pointer of type atomic_t
- *
+ *
* Atomically subtracts @i from @v and returns
* true if the result is zero, or false for all
* other cases.
*/
-static __inline__ int atomic_sub_and_test(int i, atomic_t *v)
+static inline int atomic_sub_and_test(int i, atomic_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "subl %2,%0; sete %1"
- :"+m" (v->counter), "=qm" (c)
- :"ir" (i) : "memory");
+ asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
+ : "+m" (v->counter), "=qm" (c)
+ : "ir" (i) : "memory");
return c;
}
/**
* atomic_inc - increment atomic variable
* @v: pointer of type atomic_t
- *
+ *
* Atomically increments @v by 1.
- */
-static __inline__ void atomic_inc(atomic_t *v)
+ */
+static inline void atomic_inc(atomic_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "incl %0"
- :"+m" (v->counter));
+ asm volatile(LOCK_PREFIX "incl %0"
+ : "+m" (v->counter));
}
/**
* atomic_dec - decrement atomic variable
* @v: pointer of type atomic_t
- *
+ *
* Atomically decrements @v by 1.
- */
-static __inline__ void atomic_dec(atomic_t *v)
+ */
+static inline void atomic_dec(atomic_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "decl %0"
- :"+m" (v->counter));
+ asm volatile(LOCK_PREFIX "decl %0"
+ : "+m" (v->counter));
}
/**
* atomic_dec_and_test - decrement and test
* @v: pointer of type atomic_t
- *
+ *
* Atomically decrements @v by 1 and
* returns true if the result is 0, or false for all other
* cases.
- */
-static __inline__ int atomic_dec_and_test(atomic_t *v)
+ */
+static inline int atomic_dec_and_test(atomic_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "decl %0; sete %1"
- :"+m" (v->counter), "=qm" (c)
- : : "memory");
+ asm volatile(LOCK_PREFIX "decl %0; sete %1"
+ : "+m" (v->counter), "=qm" (c)
+ : : "memory");
return c != 0;
}
/**
- * atomic_inc_and_test - increment and test
+ * atomic_inc_and_test - increment and test
* @v: pointer of type atomic_t
- *
+ *
* Atomically increments @v by 1
* and returns true if the result is zero, or false for all
* other cases.
- */
-static __inline__ int atomic_inc_and_test(atomic_t *v)
+ */
+static inline int atomic_inc_and_test(atomic_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "incl %0; sete %1"
- :"+m" (v->counter), "=qm" (c)
- : : "memory");
+ asm volatile(LOCK_PREFIX "incl %0; sete %1"
+ : "+m" (v->counter), "=qm" (c)
+ : : "memory");
return c != 0;
}
@@ -154,19 +149,18 @@
* atomic_add_negative - add and test if negative
* @v: pointer of type atomic_t
* @i: integer value to add
- *
+ *
* Atomically adds @i to @v and returns true
* if the result is negative, or false when
* result is greater than or equal to zero.
- */
-static __inline__ int atomic_add_negative(int i, atomic_t *v)
+ */
+static inline int atomic_add_negative(int i, atomic_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "addl %2,%0; sets %1"
- :"+m" (v->counter), "=qm" (c)
- :"ir" (i) : "memory");
+ asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
+ : "+m" (v->counter), "=qm" (c)
+ : "ir" (i) : "memory");
return c;
}
@@ -177,20 +171,19 @@
*
* Atomically adds @i to @v and returns @i + @v
*/
-static __inline__ int atomic_add_return(int i, atomic_t *v)
+static inline int atomic_add_return(int i, atomic_t *v)
{
int __i;
#ifdef CONFIG_M386
unsigned long flags;
- if(unlikely(boot_cpu_data.x86 <= 3))
+ if (unlikely(boot_cpu_data.x86 <= 3))
goto no_xadd;
#endif
/* Modern 486+ processor */
__i = i;
- __asm__ __volatile__(
- LOCK_PREFIX "xaddl %0, %1"
- :"+r" (i), "+m" (v->counter)
- : : "memory");
+ asm volatile(LOCK_PREFIX "xaddl %0, %1"
+ : "+r" (i), "+m" (v->counter)
+ : : "memory");
return i + __i;
#ifdef CONFIG_M386
@@ -210,9 +203,9 @@
*
* Atomically subtracts @i from @v and returns @v - @i
*/
-static __inline__ int atomic_sub_return(int i, atomic_t *v)
+static inline int atomic_sub_return(int i, atomic_t *v)
{
- return atomic_add_return(-i,v);
+ return atomic_add_return(-i, v);
}
#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
@@ -227,7 +220,7 @@
* Atomically adds @a to @v, so long as @v was not already @u.
* Returns non-zero if @v was not @u, and zero otherwise.
*/
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
c = atomic_read(v);
@@ -244,17 +237,17 @@
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-#define atomic_inc_return(v) (atomic_add_return(1,v))
-#define atomic_dec_return(v) (atomic_sub_return(1,v))
+#define atomic_inc_return(v) (atomic_add_return(1, v))
+#define atomic_dec_return(v) (atomic_sub_return(1, v))
/* These are x86-specific, used by some header files */
-#define atomic_clear_mask(mask, addr) \
-__asm__ __volatile__(LOCK_PREFIX "andl %0,%1" \
-: : "r" (~(mask)),"m" (*addr) : "memory")
+#define atomic_clear_mask(mask, addr) \
+ asm volatile(LOCK_PREFIX "andl %0,%1" \
+ : : "r" (~(mask)), "m" (*(addr)) : "memory")
-#define atomic_set_mask(mask, addr) \
-__asm__ __volatile__(LOCK_PREFIX "orl %0,%1" \
-: : "r" (mask),"m" (*(addr)) : "memory")
+#define atomic_set_mask(mask, addr) \
+ asm volatile(LOCK_PREFIX "orl %0,%1" \
+ : : "r" (mask), "m" (*(addr)) : "memory")
/* Atomic operations are already serializing on x86 */
#define smp_mb__before_atomic_dec() barrier()
diff --git a/include/asm-x86/atomic_64.h b/include/asm-x86/atomic_64.h
index 2d20a7a..3e0cd7d 100644
--- a/include/asm-x86/atomic_64.h
+++ b/include/asm-x86/atomic_64.h
@@ -22,140 +22,135 @@
* on us. We need to use _exactly_ the address the user gave us,
* not some alias that contains the same information.
*/
-typedef struct { int counter; } atomic_t;
+typedef struct {
+ int counter;
+} atomic_t;
#define ATOMIC_INIT(i) { (i) }
/**
* atomic_read - read atomic variable
* @v: pointer of type atomic_t
- *
+ *
* Atomically reads the value of @v.
- */
+ */
#define atomic_read(v) ((v)->counter)
/**
* atomic_set - set atomic variable
* @v: pointer of type atomic_t
* @i: required value
- *
+ *
* Atomically sets the value of @v to @i.
- */
-#define atomic_set(v,i) (((v)->counter) = (i))
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
/**
* atomic_add - add integer to atomic variable
* @i: integer value to add
* @v: pointer of type atomic_t
- *
+ *
* Atomically adds @i to @v.
*/
-static __inline__ void atomic_add(int i, atomic_t *v)
+static inline void atomic_add(int i, atomic_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "addl %1,%0"
- :"=m" (v->counter)
- :"ir" (i), "m" (v->counter));
+ asm volatile(LOCK_PREFIX "addl %1,%0"
+ : "=m" (v->counter)
+ : "ir" (i), "m" (v->counter));
}
/**
* atomic_sub - subtract the atomic variable
* @i: integer value to subtract
* @v: pointer of type atomic_t
- *
+ *
* Atomically subtracts @i from @v.
*/
-static __inline__ void atomic_sub(int i, atomic_t *v)
+static inline void atomic_sub(int i, atomic_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "subl %1,%0"
- :"=m" (v->counter)
- :"ir" (i), "m" (v->counter));
+ asm volatile(LOCK_PREFIX "subl %1,%0"
+ : "=m" (v->counter)
+ : "ir" (i), "m" (v->counter));
}
/**
* atomic_sub_and_test - subtract value from variable and test result
* @i: integer value to subtract
* @v: pointer of type atomic_t
- *
+ *
* Atomically subtracts @i from @v and returns
* true if the result is zero, or false for all
* other cases.
*/
-static __inline__ int atomic_sub_and_test(int i, atomic_t *v)
+static inline int atomic_sub_and_test(int i, atomic_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "subl %2,%0; sete %1"
- :"=m" (v->counter), "=qm" (c)
- :"ir" (i), "m" (v->counter) : "memory");
+ asm volatile(LOCK_PREFIX "subl %2,%0; sete %1"
+ : "=m" (v->counter), "=qm" (c)
+ : "ir" (i), "m" (v->counter) : "memory");
return c;
}
/**
* atomic_inc - increment atomic variable
* @v: pointer of type atomic_t
- *
+ *
* Atomically increments @v by 1.
- */
-static __inline__ void atomic_inc(atomic_t *v)
+ */
+static inline void atomic_inc(atomic_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "incl %0"
- :"=m" (v->counter)
- :"m" (v->counter));
+ asm volatile(LOCK_PREFIX "incl %0"
+ : "=m" (v->counter)
+ : "m" (v->counter));
}
/**
* atomic_dec - decrement atomic variable
* @v: pointer of type atomic_t
- *
+ *
* Atomically decrements @v by 1.
- */
-static __inline__ void atomic_dec(atomic_t *v)
+ */
+static inline void atomic_dec(atomic_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "decl %0"
- :"=m" (v->counter)
- :"m" (v->counter));
+ asm volatile(LOCK_PREFIX "decl %0"
+ : "=m" (v->counter)
+ : "m" (v->counter));
}
/**
* atomic_dec_and_test - decrement and test
* @v: pointer of type atomic_t
- *
+ *
* Atomically decrements @v by 1 and
* returns true if the result is 0, or false for all other
* cases.
- */
-static __inline__ int atomic_dec_and_test(atomic_t *v)
+ */
+static inline int atomic_dec_and_test(atomic_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "decl %0; sete %1"
- :"=m" (v->counter), "=qm" (c)
- :"m" (v->counter) : "memory");
+ asm volatile(LOCK_PREFIX "decl %0; sete %1"
+ : "=m" (v->counter), "=qm" (c)
+ : "m" (v->counter) : "memory");
return c != 0;
}
/**
- * atomic_inc_and_test - increment and test
+ * atomic_inc_and_test - increment and test
* @v: pointer of type atomic_t
- *
+ *
* Atomically increments @v by 1
* and returns true if the result is zero, or false for all
* other cases.
- */
-static __inline__ int atomic_inc_and_test(atomic_t *v)
+ */
+static inline int atomic_inc_and_test(atomic_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "incl %0; sete %1"
- :"=m" (v->counter), "=qm" (c)
- :"m" (v->counter) : "memory");
+ asm volatile(LOCK_PREFIX "incl %0; sete %1"
+ : "=m" (v->counter), "=qm" (c)
+ : "m" (v->counter) : "memory");
return c != 0;
}
@@ -163,19 +158,18 @@
* atomic_add_negative - add and test if negative
* @i: integer value to add
* @v: pointer of type atomic_t
- *
+ *
* Atomically adds @i to @v and returns true
* if the result is negative, or false when
* result is greater than or equal to zero.
- */
-static __inline__ int atomic_add_negative(int i, atomic_t *v)
+ */
+static inline int atomic_add_negative(int i, atomic_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "addl %2,%0; sets %1"
- :"=m" (v->counter), "=qm" (c)
- :"ir" (i), "m" (v->counter) : "memory");
+ asm volatile(LOCK_PREFIX "addl %2,%0; sets %1"
+ : "=m" (v->counter), "=qm" (c)
+ : "ir" (i), "m" (v->counter) : "memory");
return c;
}
@@ -186,27 +180,28 @@
*
* Atomically adds @i to @v and returns @i + @v
*/
-static __inline__ int atomic_add_return(int i, atomic_t *v)
+static inline int atomic_add_return(int i, atomic_t *v)
{
int __i = i;
- __asm__ __volatile__(
- LOCK_PREFIX "xaddl %0, %1"
- :"+r" (i), "+m" (v->counter)
- : : "memory");
+ asm volatile(LOCK_PREFIX "xaddl %0, %1"
+ : "+r" (i), "+m" (v->counter)
+ : : "memory");
return i + __i;
}
-static __inline__ int atomic_sub_return(int i, atomic_t *v)
+static inline int atomic_sub_return(int i, atomic_t *v)
{
- return atomic_add_return(-i,v);
+ return atomic_add_return(-i, v);
}
-#define atomic_inc_return(v) (atomic_add_return(1,v))
-#define atomic_dec_return(v) (atomic_sub_return(1,v))
+#define atomic_inc_return(v) (atomic_add_return(1, v))
+#define atomic_dec_return(v) (atomic_sub_return(1, v))
/* An 64bit atomic type */
-typedef struct { long counter; } atomic64_t;
+typedef struct {
+ long counter;
+} atomic64_t;
#define ATOMIC64_INIT(i) { (i) }
@@ -226,7 +221,7 @@
*
* Atomically sets the value of @v to @i.
*/
-#define atomic64_set(v,i) (((v)->counter) = (i))
+#define atomic64_set(v, i) (((v)->counter) = (i))
/**
* atomic64_add - add integer to atomic64 variable
@@ -235,12 +230,11 @@
*
* Atomically adds @i to @v.
*/
-static __inline__ void atomic64_add(long i, atomic64_t *v)
+static inline void atomic64_add(long i, atomic64_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "addq %1,%0"
- :"=m" (v->counter)
- :"ir" (i), "m" (v->counter));
+ asm volatile(LOCK_PREFIX "addq %1,%0"
+ : "=m" (v->counter)
+ : "ir" (i), "m" (v->counter));
}
/**
@@ -250,12 +244,11 @@
*
* Atomically subtracts @i from @v.
*/
-static __inline__ void atomic64_sub(long i, atomic64_t *v)
+static inline void atomic64_sub(long i, atomic64_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "subq %1,%0"
- :"=m" (v->counter)
- :"ir" (i), "m" (v->counter));
+ asm volatile(LOCK_PREFIX "subq %1,%0"
+ : "=m" (v->counter)
+ : "ir" (i), "m" (v->counter));
}
/**
@@ -267,14 +260,13 @@
* true if the result is zero, or false for all
* other cases.
*/
-static __inline__ int atomic64_sub_and_test(long i, atomic64_t *v)
+static inline int atomic64_sub_and_test(long i, atomic64_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "subq %2,%0; sete %1"
- :"=m" (v->counter), "=qm" (c)
- :"ir" (i), "m" (v->counter) : "memory");
+ asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
+ : "=m" (v->counter), "=qm" (c)
+ : "ir" (i), "m" (v->counter) : "memory");
return c;
}
@@ -284,12 +276,11 @@
*
* Atomically increments @v by 1.
*/
-static __inline__ void atomic64_inc(atomic64_t *v)
+static inline void atomic64_inc(atomic64_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "incq %0"
- :"=m" (v->counter)
- :"m" (v->counter));
+ asm volatile(LOCK_PREFIX "incq %0"
+ : "=m" (v->counter)
+ : "m" (v->counter));
}
/**
@@ -298,12 +289,11 @@
*
* Atomically decrements @v by 1.
*/
-static __inline__ void atomic64_dec(atomic64_t *v)
+static inline void atomic64_dec(atomic64_t *v)
{
- __asm__ __volatile__(
- LOCK_PREFIX "decq %0"
- :"=m" (v->counter)
- :"m" (v->counter));
+ asm volatile(LOCK_PREFIX "decq %0"
+ : "=m" (v->counter)
+ : "m" (v->counter));
}
/**
@@ -314,14 +304,13 @@
* returns true if the result is 0, or false for all other
* cases.
*/
-static __inline__ int atomic64_dec_and_test(atomic64_t *v)
+static inline int atomic64_dec_and_test(atomic64_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "decq %0; sete %1"
- :"=m" (v->counter), "=qm" (c)
- :"m" (v->counter) : "memory");
+ asm volatile(LOCK_PREFIX "decq %0; sete %1"
+ : "=m" (v->counter), "=qm" (c)
+ : "m" (v->counter) : "memory");
return c != 0;
}
@@ -333,14 +322,13 @@
* and returns true if the result is zero, or false for all
* other cases.
*/
-static __inline__ int atomic64_inc_and_test(atomic64_t *v)
+static inline int atomic64_inc_and_test(atomic64_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "incq %0; sete %1"
- :"=m" (v->counter), "=qm" (c)
- :"m" (v->counter) : "memory");
+ asm volatile(LOCK_PREFIX "incq %0; sete %1"
+ : "=m" (v->counter), "=qm" (c)
+ : "m" (v->counter) : "memory");
return c != 0;
}
@@ -353,14 +341,13 @@
* if the result is negative, or false when
* result is greater than or equal to zero.
*/
-static __inline__ int atomic64_add_negative(long i, atomic64_t *v)
+static inline int atomic64_add_negative(long i, atomic64_t *v)
{
unsigned char c;
- __asm__ __volatile__(
- LOCK_PREFIX "addq %2,%0; sets %1"
- :"=m" (v->counter), "=qm" (c)
- :"ir" (i), "m" (v->counter) : "memory");
+ asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
+ : "=m" (v->counter), "=qm" (c)
+ : "ir" (i), "m" (v->counter) : "memory");
return c;
}
@@ -371,29 +358,28 @@
*
* Atomically adds @i to @v and returns @i + @v
*/
-static __inline__ long atomic64_add_return(long i, atomic64_t *v)
+static inline long atomic64_add_return(long i, atomic64_t *v)
{
long __i = i;
- __asm__ __volatile__(
- LOCK_PREFIX "xaddq %0, %1;"
- :"+r" (i), "+m" (v->counter)
- : : "memory");
+ asm volatile(LOCK_PREFIX "xaddq %0, %1;"
+ : "+r" (i), "+m" (v->counter)
+ : : "memory");
return i + __i;
}
-static __inline__ long atomic64_sub_return(long i, atomic64_t *v)
+static inline long atomic64_sub_return(long i, atomic64_t *v)
{
- return atomic64_add_return(-i,v);
+ return atomic64_add_return(-i, v);
}
-#define atomic64_inc_return(v) (atomic64_add_return(1,v))
-#define atomic64_dec_return(v) (atomic64_sub_return(1,v))
+#define atomic64_inc_return(v) (atomic64_add_return(1, (v)))
+#define atomic64_dec_return(v) (atomic64_sub_return(1, (v)))
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
+#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), (new)))
/**
* atomic_add_unless - add unless the number is a given value
@@ -404,7 +390,7 @@
* Atomically adds @a to @v, so long as it was not @u.
* Returns non-zero if @v was not @u, and zero otherwise.
*/
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
c = atomic_read(v);
@@ -430,7 +416,7 @@
* Atomically adds @a to @v, so long as it was not @u.
* Returns non-zero if @v was not @u, and zero otherwise.
*/
-static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
{
long c, old;
c = atomic64_read(v);
@@ -448,13 +434,14 @@
#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
/* These are x86-specific, used by some header files */
-#define atomic_clear_mask(mask, addr) \
-__asm__ __volatile__(LOCK_PREFIX "andl %0,%1" \
-: : "r" (~(mask)),"m" (*addr) : "memory")
+#define atomic_clear_mask(mask, addr) \
+ asm volatile(LOCK_PREFIX "andl %0,%1" \
+ : : "r" (~(mask)), "m" (*(addr)) : "memory")
-#define atomic_set_mask(mask, addr) \
-__asm__ __volatile__(LOCK_PREFIX "orl %0,%1" \
-: : "r" ((unsigned)mask),"m" (*(addr)) : "memory")
+#define atomic_set_mask(mask, addr) \
+ asm volatile(LOCK_PREFIX "orl %0,%1" \
+ : : "r" ((unsigned)(mask)), "m" (*(addr)) \
+ : "memory")
/* Atomic operations are already serializing on x86 */
#define smp_mb__before_atomic_dec() barrier()
diff --git a/include/asm-x86/mach-default/bios_ebda.h b/include/asm-x86/bios_ebda.h
similarity index 100%
rename from include/asm-x86/mach-default/bios_ebda.h
rename to include/asm-x86/bios_ebda.h
diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h
index 1a23ce1..1ae7b27 100644
--- a/include/asm-x86/bitops.h
+++ b/include/asm-x86/bitops.h
@@ -23,10 +23,13 @@
#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 1)
/* Technically wrong, but this avoids compilation errors on some gcc
versions. */
-#define ADDR "=m" (*(volatile long *) addr)
+#define ADDR "=m" (*(volatile long *)addr)
+#define BIT_ADDR "=m" (((volatile int *)addr)[nr >> 5])
#else
#define ADDR "+m" (*(volatile long *) addr)
+#define BIT_ADDR "+m" (((volatile int *)addr)[nr >> 5])
#endif
+#define BASE_ADDR "m" (*(volatile int *)addr)
/**
* set_bit - Atomically set a bit in memory
@@ -45,9 +48,7 @@
*/
static inline void set_bit(int nr, volatile void *addr)
{
- asm volatile(LOCK_PREFIX "bts %1,%0"
- : ADDR
- : "Ir" (nr) : "memory");
+ asm volatile(LOCK_PREFIX "bts %1,%0" : ADDR : "Ir" (nr) : "memory");
}
/**
@@ -79,9 +80,7 @@
*/
static inline void clear_bit(int nr, volatile void *addr)
{
- asm volatile(LOCK_PREFIX "btr %1,%0"
- : ADDR
- : "Ir" (nr));
+ asm volatile(LOCK_PREFIX "btr %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR);
}
/*
@@ -100,7 +99,7 @@
static inline void __clear_bit(int nr, volatile void *addr)
{
- asm volatile("btr %1,%0" : ADDR : "Ir" (nr));
+ asm volatile("btr %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR);
}
/*
@@ -135,7 +134,7 @@
*/
static inline void __change_bit(int nr, volatile void *addr)
{
- asm volatile("btc %1,%0" : ADDR : "Ir" (nr));
+ asm volatile("btc %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR);
}
/**
@@ -149,8 +148,7 @@
*/
static inline void change_bit(int nr, volatile void *addr)
{
- asm volatile(LOCK_PREFIX "btc %1,%0"
- : ADDR : "Ir" (nr));
+ asm volatile(LOCK_PREFIX "btc %1,%2" : BIT_ADDR : "Ir" (nr), BASE_ADDR);
}
/**
@@ -166,9 +164,7 @@
int oldbit;
asm volatile(LOCK_PREFIX "bts %2,%1\n\t"
- "sbb %0,%0"
- : "=r" (oldbit), ADDR
- : "Ir" (nr) : "memory");
+ "sbb %0,%0" : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
return oldbit;
}
@@ -198,10 +194,9 @@
{
int oldbit;
- asm("bts %2,%1\n\t"
- "sbb %0,%0"
- : "=r" (oldbit), ADDR
- : "Ir" (nr));
+ asm volatile("bts %2,%3\n\t"
+ "sbb %0,%0"
+ : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR);
return oldbit;
}
@@ -219,8 +214,7 @@
asm volatile(LOCK_PREFIX "btr %2,%1\n\t"
"sbb %0,%0"
- : "=r" (oldbit), ADDR
- : "Ir" (nr) : "memory");
+ : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
return oldbit;
}
@@ -238,10 +232,9 @@
{
int oldbit;
- asm volatile("btr %2,%1\n\t"
+ asm volatile("btr %2,%3\n\t"
"sbb %0,%0"
- : "=r" (oldbit), ADDR
- : "Ir" (nr));
+ : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR);
return oldbit;
}
@@ -250,10 +243,9 @@
{
int oldbit;
- asm volatile("btc %2,%1\n\t"
+ asm volatile("btc %2,%3\n\t"
"sbb %0,%0"
- : "=r" (oldbit), ADDR
- : "Ir" (nr) : "memory");
+ : "=r" (oldbit), BIT_ADDR : "Ir" (nr), BASE_ADDR);
return oldbit;
}
@@ -272,8 +264,7 @@
asm volatile(LOCK_PREFIX "btc %2,%1\n\t"
"sbb %0,%0"
- : "=r" (oldbit), ADDR
- : "Ir" (nr) : "memory");
+ : "=r" (oldbit), ADDR : "Ir" (nr) : "memory");
return oldbit;
}
@@ -288,10 +279,11 @@
{
int oldbit;
- asm volatile("bt %2,%1\n\t"
+ asm volatile("bt %2,%3\n\t"
"sbb %0,%0"
: "=r" (oldbit)
- : "m" (*(unsigned long *)addr), "Ir" (nr));
+ : "m" (((volatile const int *)addr)[nr >> 5]),
+ "Ir" (nr), BASE_ADDR);
return oldbit;
}
@@ -310,6 +302,8 @@
constant_test_bit((nr),(addr)) : \
variable_test_bit((nr),(addr)))
+#undef BASE_ADDR
+#undef BIT_ADDR
#undef ADDR
#ifdef CONFIG_X86_32
diff --git a/include/asm-x86/bitops_32.h b/include/asm-x86/bitops_32.h
index e4d75fc..2513a81 100644
--- a/include/asm-x86/bitops_32.h
+++ b/include/asm-x86/bitops_32.h
@@ -20,20 +20,22 @@
if (!size)
return 0;
- /* This looks at memory. Mark it volatile to tell gcc not to move it around */
- __asm__ __volatile__(
- "movl $-1,%%eax\n\t"
- "xorl %%edx,%%edx\n\t"
- "repe; scasl\n\t"
- "je 1f\n\t"
- "xorl -4(%%edi),%%eax\n\t"
- "subl $4,%%edi\n\t"
- "bsfl %%eax,%%edx\n"
- "1:\tsubl %%ebx,%%edi\n\t"
- "shll $3,%%edi\n\t"
- "addl %%edi,%%edx"
- :"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
- :"1" ((size + 31) >> 5), "2" (addr), "b" (addr) : "memory");
+ /* This looks at memory.
+ * Mark it volatile to tell gcc not to move it around
+ */
+ asm volatile("movl $-1,%%eax\n\t"
+ "xorl %%edx,%%edx\n\t"
+ "repe; scasl\n\t"
+ "je 1f\n\t"
+ "xorl -4(%%edi),%%eax\n\t"
+ "subl $4,%%edi\n\t"
+ "bsfl %%eax,%%edx\n"
+ "1:\tsubl %%ebx,%%edi\n\t"
+ "shll $3,%%edi\n\t"
+ "addl %%edi,%%edx"
+ : "=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
+ : "1" ((size + 31) >> 5), "2" (addr),
+ "b" (addr) : "memory");
return res;
}
@@ -75,7 +77,7 @@
unsigned long val = *addr++;
if (val)
return __ffs(val) + x;
- x += (sizeof(*addr)<<3);
+ x += sizeof(*addr) << 3;
}
return x;
}
@@ -152,10 +154,10 @@
#include <asm-generic/bitops/ext2-non-atomic.h>
-#define ext2_set_bit_atomic(lock, nr, addr) \
- test_and_set_bit((nr), (unsigned long *)addr)
-#define ext2_clear_bit_atomic(lock, nr, addr) \
- test_and_clear_bit((nr), (unsigned long *)addr)
+#define ext2_set_bit_atomic(lock, nr, addr) \
+ test_and_set_bit((nr), (unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+ test_and_clear_bit((nr), (unsigned long *)(addr))
#include <asm-generic/bitops/minix.h>
diff --git a/include/asm-x86/bitops_64.h b/include/asm-x86/bitops_64.h
index aaf1519..365f820 100644
--- a/include/asm-x86/bitops_64.h
+++ b/include/asm-x86/bitops_64.h
@@ -17,35 +17,35 @@
return val;
}
-#define find_first_bit(addr,size) \
-((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? \
- (__scanbit(*(unsigned long *)addr,(size))) : \
- find_first_bit(addr,size)))
-
#define find_next_bit(addr,size,off) \
((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? \
((off) + (__scanbit((*(unsigned long *)addr) >> (off),(size)-(off)))) : \
find_next_bit(addr,size,off)))
-#define find_first_zero_bit(addr,size) \
-((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? \
- (__scanbit(~*(unsigned long *)addr,(size))) : \
- find_first_zero_bit(addr,size)))
-
#define find_next_zero_bit(addr,size,off) \
((__builtin_constant_p(size) && (size) <= BITS_PER_LONG ? \
((off)+(__scanbit(~(((*(unsigned long *)addr)) >> (off)),(size)-(off)))) : \
find_next_zero_bit(addr,size,off)))
-static inline void set_bit_string(unsigned long *bitmap, unsigned long i,
- int len)
-{
- unsigned long end = i + len;
+#define find_first_bit(addr, size) \
+ ((__builtin_constant_p((size)) && (size) <= BITS_PER_LONG \
+ ? (__scanbit(*(unsigned long *)(addr), (size))) \
+ : find_first_bit((addr), (size))))
+
+#define find_first_zero_bit(addr, size) \
+ ((__builtin_constant_p((size)) && (size) <= BITS_PER_LONG \
+ ? (__scanbit(~*(unsigned long *)(addr), (size))) \
+ : find_first_zero_bit((addr), (size))))
+
+static inline void set_bit_string(unsigned long *bitmap, unsigned long i,
+ int len)
+{
+ unsigned long end = i + len;
while (i < end) {
- __set_bit(i, bitmap);
+ __set_bit(i, bitmap);
i++;
}
-}
+}
/**
* ffz - find first zero in word.
@@ -150,10 +150,10 @@
#include <asm-generic/bitops/ext2-non-atomic.h>
-#define ext2_set_bit_atomic(lock,nr,addr) \
- test_and_set_bit((nr),(unsigned long*)addr)
-#define ext2_clear_bit_atomic(lock,nr,addr) \
- test_and_clear_bit((nr),(unsigned long*)addr)
+#define ext2_set_bit_atomic(lock, nr, addr) \
+ test_and_set_bit((nr), (unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+ test_and_clear_bit((nr), (unsigned long *)(addr))
#include <asm-generic/bitops/minix.h>
diff --git a/include/asm-x86/bug.h b/include/asm-x86/bug.h
index 8d477a2..b69aa64 100644
--- a/include/asm-x86/bug.h
+++ b/include/asm-x86/bug.h
@@ -12,25 +12,25 @@
# define __BUG_C0 "2:\t.quad 1b, %c0\n"
#endif
-#define BUG() \
- do { \
- asm volatile("1:\tud2\n" \
- ".pushsection __bug_table,\"a\"\n" \
- __BUG_C0 \
- "\t.word %c1, 0\n" \
- "\t.org 2b+%c2\n" \
- ".popsection" \
- : : "i" (__FILE__), "i" (__LINE__), \
- "i" (sizeof(struct bug_entry))); \
- for(;;) ; \
- } while(0)
+#define BUG() \
+do { \
+ asm volatile("1:\tud2\n" \
+ ".pushsection __bug_table,\"a\"\n" \
+ __BUG_C0 \
+ "\t.word %c1, 0\n" \
+ "\t.org 2b+%c2\n" \
+ ".popsection" \
+ : : "i" (__FILE__), "i" (__LINE__), \
+ "i" (sizeof(struct bug_entry))); \
+ for (;;) ; \
+} while (0)
#else
-#define BUG() \
- do { \
- asm volatile("ud2"); \
- for(;;) ; \
- } while(0)
+#define BUG() \
+do { \
+ asm volatile("ud2"); \
+ for (;;) ; \
+} while (0)
#endif
#endif /* !CONFIG_BUG */
diff --git a/include/asm-x86/byteorder.h b/include/asm-x86/byteorder.h
index fe2f2e5..e02ae2d 100644
--- a/include/asm-x86/byteorder.h
+++ b/include/asm-x86/byteorder.h
@@ -8,50 +8,59 @@
#ifdef __i386__
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
{
#ifdef CONFIG_X86_BSWAP
- __asm__("bswap %0" : "=r" (x) : "0" (x));
+ asm("bswap %0" : "=r" (x) : "0" (x));
#else
- __asm__("xchgb %b0,%h0\n\t" /* swap lower bytes */
- "rorl $16,%0\n\t" /* swap words */
- "xchgb %b0,%h0" /* swap higher bytes */
- :"=q" (x)
- : "0" (x));
+ asm("xchgb %b0,%h0\n\t" /* swap lower bytes */
+ "rorl $16,%0\n\t" /* swap words */
+ "xchgb %b0,%h0" /* swap higher bytes */
+ : "=q" (x)
+ : "0" (x));
#endif
return x;
}
-static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 val)
+static inline __attribute_const__ __u64 ___arch__swab64(__u64 val)
{
union {
- struct { __u32 a,b; } s;
+ struct {
+ __u32 a;
+ __u32 b;
+ } s;
__u64 u;
} v;
v.u = val;
#ifdef CONFIG_X86_BSWAP
- __asm__("bswapl %0 ; bswapl %1 ; xchgl %0,%1"
+ asm("bswapl %0 ; bswapl %1 ; xchgl %0,%1"
: "=r" (v.s.a), "=r" (v.s.b)
: "0" (v.s.a), "1" (v.s.b));
#else
v.s.a = ___arch__swab32(v.s.a);
v.s.b = ___arch__swab32(v.s.b);
- __asm__("xchgl %0,%1" : "=r" (v.s.a), "=r" (v.s.b) : "0" (v.s.a), "1" (v.s.b));
+ asm("xchgl %0,%1"
+ : "=r" (v.s.a), "=r" (v.s.b)
+ : "0" (v.s.a), "1" (v.s.b));
#endif
return v.u;
}
#else /* __i386__ */
-static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+static inline __attribute_const__ __u64 ___arch__swab64(__u64 x)
{
- __asm__("bswapq %0" : "=r" (x) : "0" (x));
+ asm("bswapq %0"
+ : "=r" (x)
+ : "0" (x));
return x;
}
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
{
- __asm__("bswapl %0" : "=r" (x) : "0" (x));
+ asm("bswapl %0"
+ : "=r" (x)
+ : "0" (x));
return x;
}
diff --git a/include/asm-x86/cacheflush.h b/include/asm-x86/cacheflush.h
index 5396c21..f4c0ab5 100644
--- a/include/asm-x86/cacheflush.h
+++ b/include/asm-x86/cacheflush.h
@@ -14,18 +14,77 @@
#define flush_dcache_mmap_lock(mapping) do { } while (0)
#define flush_dcache_mmap_unlock(mapping) do { } while (0)
#define flush_icache_range(start, end) do { } while (0)
-#define flush_icache_page(vma,pg) do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+#define flush_icache_page(vma, pg) do { } while (0)
+#define flush_icache_user_range(vma, pg, adr, len) do { } while (0)
#define flush_cache_vmap(start, end) do { } while (0)
#define flush_cache_vunmap(start, end) do { } while (0)
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy((dst), (src), (len))
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy((dst), (src), (len))
-int __deprecated_for_modules change_page_attr(struct page *page, int numpages,
- pgprot_t prot);
+
+/*
+ * The set_memory_* API can be used to change various attributes of a virtual
+ * address range. The attributes include:
+ * Cachability : UnCached, WriteCombining, WriteBack
+ * Executability : eXeutable, NoteXecutable
+ * Read/Write : ReadOnly, ReadWrite
+ * Presence : NotPresent
+ *
+ * Within a catagory, the attributes are mutually exclusive.
+ *
+ * The implementation of this API will take care of various aspects that
+ * are associated with changing such attributes, such as:
+ * - Flushing TLBs
+ * - Flushing CPU caches
+ * - Making sure aliases of the memory behind the mapping don't violate
+ * coherency rules as defined by the CPU in the system.
+ *
+ * What this API does not do:
+ * - Provide exclusion between various callers - including callers that
+ * operation on other mappings of the same physical page
+ * - Restore default attributes when a page is freed
+ * - Guarantee that mappings other than the requested one are
+ * in any state, other than that these do not violate rules for
+ * the CPU you have. Do not depend on any effects on other mappings,
+ * CPUs other than the one you have may have more relaxed rules.
+ * The caller is required to take care of these.
+ */
+
+int _set_memory_uc(unsigned long addr, int numpages);
+int _set_memory_wc(unsigned long addr, int numpages);
+int _set_memory_wb(unsigned long addr, int numpages);
+int set_memory_uc(unsigned long addr, int numpages);
+int set_memory_wc(unsigned long addr, int numpages);
+int set_memory_wb(unsigned long addr, int numpages);
+int set_memory_x(unsigned long addr, int numpages);
+int set_memory_nx(unsigned long addr, int numpages);
+int set_memory_ro(unsigned long addr, int numpages);
+int set_memory_rw(unsigned long addr, int numpages);
+int set_memory_np(unsigned long addr, int numpages);
+int set_memory_4k(unsigned long addr, int numpages);
+
+/*
+ * For legacy compatibility with the old APIs, a few functions
+ * are provided that work on a "struct page".
+ * These functions operate ONLY on the 1:1 kernel mapping of the
+ * memory that the struct page represents, and internally just
+ * call the set_memory_* function. See the description of the
+ * set_memory_* function for more details on conventions.
+ *
+ * These APIs should be considered *deprecated* and are likely going to
+ * be removed in the future.
+ * The reason for this is the implicit operation on the 1:1 mapping only,
+ * making this not a generally useful API.
+ *
+ * Specifically, many users of the old APIs had a virtual address,
+ * called virt_to_page() or vmalloc_to_page() on that address to
+ * get a struct page* that the old API required.
+ * To convert these cases, use set_memory_*() on the original
+ * virtual address, do not use these functions.
+ */
int set_pages_uc(struct page *page, int numpages);
int set_pages_wb(struct page *page, int numpages);
@@ -34,13 +93,6 @@
int set_pages_ro(struct page *page, int numpages);
int set_pages_rw(struct page *page, int numpages);
-int set_memory_uc(unsigned long addr, int numpages);
-int set_memory_wb(unsigned long addr, int numpages);
-int set_memory_x(unsigned long addr, int numpages);
-int set_memory_nx(unsigned long addr, int numpages);
-int set_memory_ro(unsigned long addr, int numpages);
-int set_memory_rw(unsigned long addr, int numpages);
-int set_memory_np(unsigned long addr, int numpages);
void clflush_cache_range(void *addr, unsigned int size);
diff --git a/include/asm-x86/checksum_32.h b/include/asm-x86/checksum_32.h
index 75194ab..52bbb0d 100644
--- a/include/asm-x86/checksum_32.h
+++ b/include/asm-x86/checksum_32.h
@@ -28,7 +28,8 @@
*/
asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
- int len, __wsum sum, int *src_err_ptr, int *dst_err_ptr);
+ int len, __wsum sum,
+ int *src_err_ptr, int *dst_err_ptr);
/*
* Note: when you get a NULL pointer exception here this means someone
@@ -37,20 +38,20 @@
* If you use these functions directly please don't forget the
* access_ok().
*/
-static __inline__
-__wsum csum_partial_copy_nocheck (const void *src, void *dst,
- int len, __wsum sum)
+static inline __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum)
{
- return csum_partial_copy_generic ( src, dst, len, sum, NULL, NULL);
+ return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
}
-static __inline__
-__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *err_ptr)
+static inline __wsum csum_partial_copy_from_user(const void __user *src,
+ void *dst,
+ int len, __wsum sum,
+ int *err_ptr)
{
might_sleep();
return csum_partial_copy_generic((__force void *)src, dst,
- len, sum, err_ptr, NULL);
+ len, sum, err_ptr, NULL);
}
/*
@@ -64,30 +65,29 @@
{
unsigned int sum;
- __asm__ __volatile__(
- "movl (%1), %0 ;\n"
- "subl $4, %2 ;\n"
- "jbe 2f ;\n"
- "addl 4(%1), %0 ;\n"
- "adcl 8(%1), %0 ;\n"
- "adcl 12(%1), %0 ;\n"
-"1: adcl 16(%1), %0 ;\n"
- "lea 4(%1), %1 ;\n"
- "decl %2 ;\n"
- "jne 1b ;\n"
- "adcl $0, %0 ;\n"
- "movl %0, %2 ;\n"
- "shrl $16, %0 ;\n"
- "addw %w2, %w0 ;\n"
- "adcl $0, %0 ;\n"
- "notl %0 ;\n"
-"2: ;\n"
+ asm volatile("movl (%1), %0 ;\n"
+ "subl $4, %2 ;\n"
+ "jbe 2f ;\n"
+ "addl 4(%1), %0 ;\n"
+ "adcl 8(%1), %0 ;\n"
+ "adcl 12(%1), %0;\n"
+ "1: adcl 16(%1), %0 ;\n"
+ "lea 4(%1), %1 ;\n"
+ "decl %2 ;\n"
+ "jne 1b ;\n"
+ "adcl $0, %0 ;\n"
+ "movl %0, %2 ;\n"
+ "shrl $16, %0 ;\n"
+ "addw %w2, %w0 ;\n"
+ "adcl $0, %0 ;\n"
+ "notl %0 ;\n"
+ "2: ;\n"
/* Since the input registers which are loaded with iph and ihl
are modified, we must also specify them as outputs, or gcc
will assume they contain their original values. */
- : "=r" (sum), "=r" (iph), "=r" (ihl)
- : "1" (iph), "2" (ihl)
- : "memory");
+ : "=r" (sum), "=r" (iph), "=r" (ihl)
+ : "1" (iph), "2" (ihl)
+ : "memory");
return (__force __sum16)sum;
}
@@ -97,29 +97,27 @@
static inline __sum16 csum_fold(__wsum sum)
{
- __asm__(
- "addl %1, %0 ;\n"
- "adcl $0xffff, %0 ;\n"
- : "=r" (sum)
- : "r" ((__force u32)sum << 16),
- "0" ((__force u32)sum & 0xffff0000)
- );
+ asm("addl %1, %0 ;\n"
+ "adcl $0xffff, %0 ;\n"
+ : "=r" (sum)
+ : "r" ((__force u32)sum << 16),
+ "0" ((__force u32)sum & 0xffff0000));
return (__force __sum16)(~(__force u32)sum >> 16);
}
static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
- unsigned short len,
- unsigned short proto,
- __wsum sum)
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
{
- __asm__(
- "addl %1, %0 ;\n"
- "adcl %2, %0 ;\n"
- "adcl %3, %0 ;\n"
- "adcl $0, %0 ;\n"
- : "=r" (sum)
- : "g" (daddr), "g"(saddr), "g"((len + proto) << 8), "0"(sum));
- return sum;
+ asm("addl %1, %0 ;\n"
+ "adcl %2, %0 ;\n"
+ "adcl %3, %0 ;\n"
+ "adcl $0, %0 ;\n"
+ : "=r" (sum)
+ : "g" (daddr), "g"(saddr),
+ "g" ((len + proto) << 8), "0" (sum));
+ return sum;
}
/*
@@ -127,11 +125,11 @@
* returns a 16-bit checksum, already complemented
*/
static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
- unsigned short len,
- unsigned short proto,
- __wsum sum)
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
}
/*
@@ -141,30 +139,29 @@
static inline __sum16 ip_compute_csum(const void *buff, int len)
{
- return csum_fold (csum_partial(buff, len, 0));
+ return csum_fold(csum_partial(buff, len, 0));
}
#define _HAVE_ARCH_IPV6_CSUM
-static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
- const struct in6_addr *daddr,
- __u32 len, unsigned short proto,
- __wsum sum)
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+ const struct in6_addr *daddr,
+ __u32 len, unsigned short proto,
+ __wsum sum)
{
- __asm__(
- "addl 0(%1), %0 ;\n"
- "adcl 4(%1), %0 ;\n"
- "adcl 8(%1), %0 ;\n"
- "adcl 12(%1), %0 ;\n"
- "adcl 0(%2), %0 ;\n"
- "adcl 4(%2), %0 ;\n"
- "adcl 8(%2), %0 ;\n"
- "adcl 12(%2), %0 ;\n"
- "adcl %3, %0 ;\n"
- "adcl %4, %0 ;\n"
- "adcl $0, %0 ;\n"
- : "=&r" (sum)
- : "r" (saddr), "r" (daddr),
- "r"(htonl(len)), "r"(htonl(proto)), "0"(sum));
+ asm("addl 0(%1), %0 ;\n"
+ "adcl 4(%1), %0 ;\n"
+ "adcl 8(%1), %0 ;\n"
+ "adcl 12(%1), %0 ;\n"
+ "adcl 0(%2), %0 ;\n"
+ "adcl 4(%2), %0 ;\n"
+ "adcl 8(%2), %0 ;\n"
+ "adcl 12(%2), %0 ;\n"
+ "adcl %3, %0 ;\n"
+ "adcl %4, %0 ;\n"
+ "adcl $0, %0 ;\n"
+ : "=&r" (sum)
+ : "r" (saddr), "r" (daddr),
+ "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
return csum_fold(sum);
}
@@ -173,14 +170,15 @@
* Copy and checksum to user
*/
#define HAVE_CSUM_COPY_USER
-static __inline__ __wsum csum_and_copy_to_user(const void *src,
- void __user *dst,
- int len, __wsum sum,
- int *err_ptr)
+static inline __wsum csum_and_copy_to_user(const void *src,
+ void __user *dst,
+ int len, __wsum sum,
+ int *err_ptr)
{
might_sleep();
if (access_ok(VERIFY_WRITE, dst, len))
- return csum_partial_copy_generic(src, (__force void *)dst, len, sum, NULL, err_ptr);
+ return csum_partial_copy_generic(src, (__force void *)dst,
+ len, sum, NULL, err_ptr);
if (len)
*err_ptr = -EFAULT;
diff --git a/include/asm-x86/checksum_64.h b/include/asm-x86/checksum_64.h
index e5f7999..8bd861c 100644
--- a/include/asm-x86/checksum_64.h
+++ b/include/asm-x86/checksum_64.h
@@ -1,33 +1,31 @@
#ifndef _X86_64_CHECKSUM_H
#define _X86_64_CHECKSUM_H
-/*
- * Checksums for x86-64
- * Copyright 2002 by Andi Kleen, SuSE Labs
+/*
+ * Checksums for x86-64
+ * Copyright 2002 by Andi Kleen, SuSE Labs
* with some code from asm-x86/checksum.h
- */
+ */
#include <linux/compiler.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
-/**
+/**
* csum_fold - Fold and invert a 32bit checksum.
* sum: 32bit unfolded sum
- *
+ *
* Fold a 32bit running checksum to 16bit and invert it. This is usually
* the last step before putting a checksum into a packet.
* Make sure not to mix with 64bit checksums.
*/
static inline __sum16 csum_fold(__wsum sum)
{
- __asm__(
- " addl %1,%0\n"
- " adcl $0xffff,%0"
- : "=r" (sum)
- : "r" ((__force u32)sum << 16),
- "0" ((__force u32)sum & 0xffff0000)
- );
+ asm(" addl %1,%0\n"
+ " adcl $0xffff,%0"
+ : "=r" (sum)
+ : "r" ((__force u32)sum << 16),
+ "0" ((__force u32)sum & 0xffff0000));
return (__force __sum16)(~(__force u32)sum >> 16);
}
@@ -43,46 +41,46 @@
* ip_fast_csum - Compute the IPv4 header checksum efficiently.
* iph: ipv4 header
* ihl: length of header / 4
- */
+ */
static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
{
unsigned int sum;
- asm( " movl (%1), %0\n"
- " subl $4, %2\n"
- " jbe 2f\n"
- " addl 4(%1), %0\n"
- " adcl 8(%1), %0\n"
- " adcl 12(%1), %0\n"
- "1: adcl 16(%1), %0\n"
- " lea 4(%1), %1\n"
- " decl %2\n"
- " jne 1b\n"
- " adcl $0, %0\n"
- " movl %0, %2\n"
- " shrl $16, %0\n"
- " addw %w2, %w0\n"
- " adcl $0, %0\n"
- " notl %0\n"
- "2:"
+ asm(" movl (%1), %0\n"
+ " subl $4, %2\n"
+ " jbe 2f\n"
+ " addl 4(%1), %0\n"
+ " adcl 8(%1), %0\n"
+ " adcl 12(%1), %0\n"
+ "1: adcl 16(%1), %0\n"
+ " lea 4(%1), %1\n"
+ " decl %2\n"
+ " jne 1b\n"
+ " adcl $0, %0\n"
+ " movl %0, %2\n"
+ " shrl $16, %0\n"
+ " addw %w2, %w0\n"
+ " adcl $0, %0\n"
+ " notl %0\n"
+ "2:"
/* Since the input registers which are loaded with iph and ihl
are modified, we must also specify them as outputs, or gcc
will assume they contain their original values. */
- : "=r" (sum), "=r" (iph), "=r" (ihl)
- : "1" (iph), "2" (ihl)
- : "memory");
+ : "=r" (sum), "=r" (iph), "=r" (ihl)
+ : "1" (iph), "2" (ihl)
+ : "memory");
return (__force __sum16)sum;
}
-/**
+/**
* csum_tcpup_nofold - Compute an IPv4 pseudo header checksum.
* @saddr: source address
* @daddr: destination address
* @len: length of packet
* @proto: ip protocol of packet
- * @sum: initial sum to be added in (32bit unfolded)
- *
- * Returns the pseudo header checksum the input data. Result is
+ * @sum: initial sum to be added in (32bit unfolded)
+ *
+ * Returns the pseudo header checksum the input data. Result is
* 32bit unfolded.
*/
static inline __wsum
@@ -93,32 +91,32 @@
" adcl %2, %0\n"
" adcl %3, %0\n"
" adcl $0, %0\n"
- : "=r" (sum)
+ : "=r" (sum)
: "g" (daddr), "g" (saddr),
"g" ((len + proto)<<8), "0" (sum));
- return sum;
+ return sum;
}
-/**
+/**
* csum_tcpup_magic - Compute an IPv4 pseudo header checksum.
* @saddr: source address
* @daddr: destination address
* @len: length of packet
* @proto: ip protocol of packet
- * @sum: initial sum to be added in (32bit unfolded)
- *
+ * @sum: initial sum to be added in (32bit unfolded)
+ *
* Returns the 16bit pseudo header checksum the input data already
* complemented and ready to be filled in.
*/
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr,
- unsigned short len, unsigned short proto, __wsum sum)
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+ unsigned short len,
+ unsigned short proto, __wsum sum)
{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
}
-/**
+/**
* csum_partial - Compute an internet checksum.
* @buff: buffer to be checksummed
* @len: length of buffer.
@@ -127,7 +125,7 @@
* Returns the 32bit unfolded internet checksum of the buffer.
* Before filling it in it needs to be csum_fold()'ed.
* buff should be aligned to a 64bit boundary if possible.
- */
+ */
extern __wsum csum_partial(const void *buff, int len, __wsum sum);
#define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER 1
@@ -136,23 +134,22 @@
/* Do not call this directly. Use the wrappers below */
extern __wsum csum_partial_copy_generic(const void *src, const void *dst,
- int len,
- __wsum sum,
- int *src_err_ptr, int *dst_err_ptr);
+ int len, __wsum sum,
+ int *src_err_ptr, int *dst_err_ptr);
extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum isum, int *errp);
+ int len, __wsum isum, int *errp);
extern __wsum csum_partial_copy_to_user(const void *src, void __user *dst,
- int len, __wsum isum, int *errp);
-extern __wsum csum_partial_copy_nocheck(const void *src, void *dst, int len,
- __wsum sum);
+ int len, __wsum isum, int *errp);
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
/* Old names. To be removed. */
#define csum_and_copy_to_user csum_partial_copy_to_user
#define csum_and_copy_from_user csum_partial_copy_from_user
-/**
+/**
* ip_compute_csum - Compute an 16bit IP checksum.
* @buff: buffer address.
* @len: length of buffer.
@@ -170,7 +167,7 @@
* @proto: protocol of packet
* @sum: initial sum (32bit unfolded) to be added in
*
- * Computes an IPv6 pseudo header checksum. This sum is added the checksum
+ * Computes an IPv6 pseudo header checksum. This sum is added the checksum
* into UDP/TCP packets and contains some link layer information.
* Returns the unfolded 32bit checksum.
*/
@@ -185,11 +182,10 @@
static inline unsigned add32_with_carry(unsigned a, unsigned b)
{
asm("addl %2,%0\n\t"
- "adcl $0,%0"
- : "=r" (a)
+ "adcl $0,%0"
+ : "=r" (a)
: "0" (a), "r" (b));
return a;
}
#endif
-
diff --git a/include/asm-x86/cmpxchg_32.h b/include/asm-x86/cmpxchg_32.h
index 959fad0..bf5a69d 100644
--- a/include/asm-x86/cmpxchg_32.h
+++ b/include/asm-x86/cmpxchg_32.h
@@ -8,9 +8,12 @@
* you need to test for the feature in boot_cpu_data.
*/
-#define xchg(ptr,v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v),(ptr),sizeof(*(ptr))))
+#define xchg(ptr, v) \
+ ((__typeof__(*(ptr)))__xchg((unsigned long)(v), (ptr), sizeof(*(ptr))))
-struct __xchg_dummy { unsigned long a[100]; };
+struct __xchg_dummy {
+ unsigned long a[100];
+};
#define __xg(x) ((struct __xchg_dummy *)(x))
/*
@@ -27,72 +30,74 @@
* of the instruction set reference 24319102.pdf. We need
* the reader side to see the coherent 64bit value.
*/
-static inline void __set_64bit (unsigned long long * ptr,
- unsigned int low, unsigned int high)
+static inline void __set_64bit(unsigned long long *ptr,
+ unsigned int low, unsigned int high)
{
- __asm__ __volatile__ (
- "\n1:\t"
- "movl (%0), %%eax\n\t"
- "movl 4(%0), %%edx\n\t"
- LOCK_PREFIX "cmpxchg8b (%0)\n\t"
- "jnz 1b"
- : /* no outputs */
- : "D"(ptr),
- "b"(low),
- "c"(high)
- : "ax","dx","memory");
+ asm volatile("\n1:\t"
+ "movl (%0), %%eax\n\t"
+ "movl 4(%0), %%edx\n\t"
+ LOCK_PREFIX "cmpxchg8b (%0)\n\t"
+ "jnz 1b"
+ : /* no outputs */
+ : "D"(ptr),
+ "b"(low),
+ "c"(high)
+ : "ax", "dx", "memory");
}
-static inline void __set_64bit_constant (unsigned long long *ptr,
- unsigned long long value)
+static inline void __set_64bit_constant(unsigned long long *ptr,
+ unsigned long long value)
{
- __set_64bit(ptr,(unsigned int)(value), (unsigned int)((value)>>32ULL));
-}
-#define ll_low(x) *(((unsigned int*)&(x))+0)
-#define ll_high(x) *(((unsigned int*)&(x))+1)
-
-static inline void __set_64bit_var (unsigned long long *ptr,
- unsigned long long value)
-{
- __set_64bit(ptr,ll_low(value), ll_high(value));
+ __set_64bit(ptr, (unsigned int)value, (unsigned int)(value >> 32));
}
-#define set_64bit(ptr,value) \
-(__builtin_constant_p(value) ? \
- __set_64bit_constant(ptr, value) : \
- __set_64bit_var(ptr, value) )
+#define ll_low(x) *(((unsigned int *)&(x)) + 0)
+#define ll_high(x) *(((unsigned int *)&(x)) + 1)
-#define _set_64bit(ptr,value) \
-(__builtin_constant_p(value) ? \
- __set_64bit(ptr, (unsigned int)(value), (unsigned int)((value)>>32ULL) ) : \
- __set_64bit(ptr, ll_low(value), ll_high(value)) )
+static inline void __set_64bit_var(unsigned long long *ptr,
+ unsigned long long value)
+{
+ __set_64bit(ptr, ll_low(value), ll_high(value));
+}
+
+#define set_64bit(ptr, value) \
+ (__builtin_constant_p((value)) \
+ ? __set_64bit_constant((ptr), (value)) \
+ : __set_64bit_var((ptr), (value)))
+
+#define _set_64bit(ptr, value) \
+ (__builtin_constant_p(value) \
+ ? __set_64bit(ptr, (unsigned int)(value), \
+ (unsigned int)((value) >> 32)) \
+ : __set_64bit(ptr, ll_low((value)), ll_high((value))))
/*
* Note: no "lock" prefix even on SMP: xchg always implies lock anyway
* Note 2: xchg has side effect, so that attribute volatile is necessary,
* but generally the primitive is invalid, *ptr is output argument. --ANK
*/
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+ int size)
{
switch (size) {
- case 1:
- __asm__ __volatile__("xchgb %b0,%1"
- :"=q" (x)
- :"m" (*__xg(ptr)), "0" (x)
- :"memory");
- break;
- case 2:
- __asm__ __volatile__("xchgw %w0,%1"
- :"=r" (x)
- :"m" (*__xg(ptr)), "0" (x)
- :"memory");
- break;
- case 4:
- __asm__ __volatile__("xchgl %0,%1"
- :"=r" (x)
- :"m" (*__xg(ptr)), "0" (x)
- :"memory");
- break;
+ case 1:
+ asm volatile("xchgb %b0,%1"
+ : "=q" (x)
+ : "m" (*__xg(ptr)), "0" (x)
+ : "memory");
+ break;
+ case 2:
+ asm volatile("xchgw %w0,%1"
+ : "=r" (x)
+ : "m" (*__xg(ptr)), "0" (x)
+ : "memory");
+ break;
+ case 4:
+ asm volatile("xchgl %0,%1"
+ : "=r" (x)
+ : "m" (*__xg(ptr)), "0" (x)
+ : "memory");
+ break;
}
return x;
}
@@ -105,24 +110,27 @@
#ifdef CONFIG_X86_CMPXCHG
#define __HAVE_ARCH_CMPXCHG 1
-#define cmpxchg(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-#define sync_cmpxchg(ptr, o, n) \
- ((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+#define sync_cmpxchg(ptr, o, n) \
+ ((__typeof__(*(ptr)))__sync_cmpxchg((ptr), (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
#endif
#ifdef CONFIG_X86_CMPXCHG64
-#define cmpxchg64(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg64((ptr), (unsigned long long)(o), \
- (unsigned long long)(n)))
-#define cmpxchg64_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg64_local((ptr), (unsigned long long)(o),\
- (unsigned long long)(n)))
+#define cmpxchg64(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg64((ptr), (unsigned long long)(o), \
+ (unsigned long long)(n)))
+#define cmpxchg64_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg64_local((ptr), (unsigned long long)(o), \
+ (unsigned long long)(n)))
#endif
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
@@ -131,22 +139,22 @@
unsigned long prev;
switch (size) {
case 1:
- __asm__ __volatile__(LOCK_PREFIX "cmpxchgb %b1,%2"
- : "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
+ : "=a"(prev)
+ : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 2:
- __asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 4:
- __asm__ __volatile__(LOCK_PREFIX "cmpxchgl %1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile(LOCK_PREFIX "cmpxchgl %1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
}
return old;
@@ -158,85 +166,88 @@
* isn't.
*/
static inline unsigned long __sync_cmpxchg(volatile void *ptr,
- unsigned long old,
- unsigned long new, int size)
+ unsigned long old,
+ unsigned long new, int size)
{
unsigned long prev;
switch (size) {
case 1:
- __asm__ __volatile__("lock; cmpxchgb %b1,%2"
- : "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile("lock; cmpxchgb %b1,%2"
+ : "=a"(prev)
+ : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 2:
- __asm__ __volatile__("lock; cmpxchgw %w1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile("lock; cmpxchgw %w1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 4:
- __asm__ __volatile__("lock; cmpxchgl %1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile("lock; cmpxchgl %1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
}
return old;
}
static inline unsigned long __cmpxchg_local(volatile void *ptr,
- unsigned long old, unsigned long new, int size)
+ unsigned long old,
+ unsigned long new, int size)
{
unsigned long prev;
switch (size) {
case 1:
- __asm__ __volatile__("cmpxchgb %b1,%2"
- : "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile("cmpxchgb %b1,%2"
+ : "=a"(prev)
+ : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 2:
- __asm__ __volatile__("cmpxchgw %w1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile("cmpxchgw %w1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 4:
- __asm__ __volatile__("cmpxchgl %1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile("cmpxchgl %1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
}
return old;
}
static inline unsigned long long __cmpxchg64(volatile void *ptr,
- unsigned long long old, unsigned long long new)
+ unsigned long long old,
+ unsigned long long new)
{
unsigned long long prev;
- __asm__ __volatile__(LOCK_PREFIX "cmpxchg8b %3"
- : "=A"(prev)
- : "b"((unsigned long)new),
- "c"((unsigned long)(new >> 32)),
- "m"(*__xg(ptr)),
- "0"(old)
- : "memory");
+ asm volatile(LOCK_PREFIX "cmpxchg8b %3"
+ : "=A"(prev)
+ : "b"((unsigned long)new),
+ "c"((unsigned long)(new >> 32)),
+ "m"(*__xg(ptr)),
+ "0"(old)
+ : "memory");
return prev;
}
static inline unsigned long long __cmpxchg64_local(volatile void *ptr,
- unsigned long long old, unsigned long long new)
+ unsigned long long old,
+ unsigned long long new)
{
unsigned long long prev;
- __asm__ __volatile__("cmpxchg8b %3"
- : "=A"(prev)
- : "b"((unsigned long)new),
- "c"((unsigned long)(new >> 32)),
- "m"(*__xg(ptr)),
- "0"(old)
- : "memory");
+ asm volatile("cmpxchg8b %3"
+ : "=A"(prev)
+ : "b"((unsigned long)new),
+ "c"((unsigned long)(new >> 32)),
+ "m"(*__xg(ptr)),
+ "0"(old)
+ : "memory");
return prev;
}
@@ -252,7 +263,7 @@
extern unsigned long cmpxchg_386_u32(volatile void *, u32, u32);
static inline unsigned long cmpxchg_386(volatile void *ptr, unsigned long old,
- unsigned long new, int size)
+ unsigned long new, int size)
{
switch (size) {
case 1:
diff --git a/include/asm-x86/cmpxchg_64.h b/include/asm-x86/cmpxchg_64.h
index 56f5b41..d9b26b9 100644
--- a/include/asm-x86/cmpxchg_64.h
+++ b/include/asm-x86/cmpxchg_64.h
@@ -3,7 +3,8 @@
#include <asm/alternative.h> /* Provides LOCK_PREFIX */
-#define xchg(ptr,v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v),(ptr),sizeof(*(ptr))))
+#define xchg(ptr, v) ((__typeof__(*(ptr)))__xchg((unsigned long)(v), \
+ (ptr), sizeof(*(ptr))))
#define __xg(x) ((volatile long *)(x))
@@ -19,33 +20,34 @@
* Note 2: xchg has side effect, so that attribute volatile is necessary,
* but generally the primitive is invalid, *ptr is output argument. --ANK
*/
-static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+ int size)
{
switch (size) {
- case 1:
- __asm__ __volatile__("xchgb %b0,%1"
- :"=q" (x)
- :"m" (*__xg(ptr)), "0" (x)
- :"memory");
- break;
- case 2:
- __asm__ __volatile__("xchgw %w0,%1"
- :"=r" (x)
- :"m" (*__xg(ptr)), "0" (x)
- :"memory");
- break;
- case 4:
- __asm__ __volatile__("xchgl %k0,%1"
- :"=r" (x)
- :"m" (*__xg(ptr)), "0" (x)
- :"memory");
- break;
- case 8:
- __asm__ __volatile__("xchgq %0,%1"
- :"=r" (x)
- :"m" (*__xg(ptr)), "0" (x)
- :"memory");
- break;
+ case 1:
+ asm volatile("xchgb %b0,%1"
+ : "=q" (x)
+ : "m" (*__xg(ptr)), "0" (x)
+ : "memory");
+ break;
+ case 2:
+ asm volatile("xchgw %w0,%1"
+ : "=r" (x)
+ : "m" (*__xg(ptr)), "0" (x)
+ : "memory");
+ break;
+ case 4:
+ asm volatile("xchgl %k0,%1"
+ : "=r" (x)
+ : "m" (*__xg(ptr)), "0" (x)
+ : "memory");
+ break;
+ case 8:
+ asm volatile("xchgq %0,%1"
+ : "=r" (x)
+ : "m" (*__xg(ptr)), "0" (x)
+ : "memory");
+ break;
}
return x;
}
@@ -64,61 +66,62 @@
unsigned long prev;
switch (size) {
case 1:
- __asm__ __volatile__(LOCK_PREFIX "cmpxchgb %b1,%2"
- : "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile(LOCK_PREFIX "cmpxchgb %b1,%2"
+ : "=a"(prev)
+ : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 2:
- __asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile(LOCK_PREFIX "cmpxchgw %w1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 4:
- __asm__ __volatile__(LOCK_PREFIX "cmpxchgl %k1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile(LOCK_PREFIX "cmpxchgl %k1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 8:
- __asm__ __volatile__(LOCK_PREFIX "cmpxchgq %1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile(LOCK_PREFIX "cmpxchgq %1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
}
return old;
}
static inline unsigned long __cmpxchg_local(volatile void *ptr,
- unsigned long old, unsigned long new, int size)
+ unsigned long old,
+ unsigned long new, int size)
{
unsigned long prev;
switch (size) {
case 1:
- __asm__ __volatile__("cmpxchgb %b1,%2"
- : "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile("cmpxchgb %b1,%2"
+ : "=a"(prev)
+ : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 2:
- __asm__ __volatile__("cmpxchgw %w1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile("cmpxchgw %w1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 4:
- __asm__ __volatile__("cmpxchgl %k1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile("cmpxchgl %k1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
case 8:
- __asm__ __volatile__("cmpxchgq %1,%2"
- : "=a"(prev)
- : "r"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
+ asm volatile("cmpxchgq %1,%2"
+ : "=a"(prev)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
return prev;
}
return old;
@@ -126,19 +129,20 @@
#define cmpxchg(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
+ (unsigned long)(n), sizeof(*(ptr))))
#define cmpxchg64(ptr, o, n) \
- ({ \
+({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg((ptr), (o), (n)); \
- })
+})
#define cmpxchg_local(ptr, o, n) \
((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
#define cmpxchg64_local(ptr, o, n) \
- ({ \
+({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg_local((ptr), (o), (n)); \
- })
+})
#endif
diff --git a/include/asm-x86/compat.h b/include/asm-x86/compat.h
index d3e8f3e..1793ac3 100644
--- a/include/asm-x86/compat.h
+++ b/include/asm-x86/compat.h
@@ -204,7 +204,7 @@
return (u32)(unsigned long)uptr;
}
-static __inline__ void __user *compat_alloc_user_space(long len)
+static inline void __user *compat_alloc_user_space(long len)
{
struct pt_regs *regs = task_pt_regs(current);
return (void __user *)regs->sp - len;
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 065e929..0d609c8 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -120,6 +120,9 @@
extern const char * const x86_cap_flags[NCAPINTS*32];
extern const char * const x86_power_flags[32];
+#define test_cpu_cap(c, bit) \
+ test_bit(bit, (unsigned long *)((c)->x86_capability))
+
#define cpu_has(c, bit) \
(__builtin_constant_p(bit) && \
( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) || \
@@ -131,7 +134,8 @@
(((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) || \
(((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) ) \
? 1 : \
- test_bit(bit, (unsigned long *)((c)->x86_capability)))
+ test_cpu_cap(c, bit))
+
#define boot_cpu_has(bit) cpu_has(&boot_cpu_data, bit)
#define set_cpu_cap(c, bit) set_bit(bit, (unsigned long *)((c)->x86_capability))
@@ -181,6 +185,8 @@
#define cpu_has_clflush boot_cpu_has(X86_FEATURE_CLFLSH)
#define cpu_has_bts boot_cpu_has(X86_FEATURE_BTS)
#define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES)
+#define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
+#define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT)
#if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
# define cpu_has_invlpg 1
diff --git a/include/asm-x86/current_32.h b/include/asm-x86/current_32.h
index d352485..5af9bdb 100644
--- a/include/asm-x86/current_32.h
+++ b/include/asm-x86/current_32.h
@@ -11,7 +11,7 @@
{
return x86_read_percpu(current_task);
}
-
+
#define current get_current()
#endif /* !(_I386_CURRENT_H) */
diff --git a/include/asm-x86/current_64.h b/include/asm-x86/current_64.h
index bc8adec..2d368ed 100644
--- a/include/asm-x86/current_64.h
+++ b/include/asm-x86/current_64.h
@@ -1,23 +1,23 @@
#ifndef _X86_64_CURRENT_H
#define _X86_64_CURRENT_H
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLY__)
struct task_struct;
#include <asm/pda.h>
-static inline struct task_struct *get_current(void)
-{
- struct task_struct *t = read_pda(pcurrent);
+static inline struct task_struct *get_current(void)
+{
+ struct task_struct *t = read_pda(pcurrent);
return t;
-}
+}
#define current get_current()
#else
#ifndef ASM_OFFSET_H
-#include <asm/asm-offsets.h>
+#include <asm/asm-offsets.h>
#endif
#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg
diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h
index 5b6a05d..268a012 100644
--- a/include/asm-x86/desc.h
+++ b/include/asm-x86/desc.h
@@ -62,8 +62,8 @@
}
static inline void pack_gate(gate_desc *gate, unsigned char type,
- unsigned long base, unsigned dpl, unsigned flags, unsigned short seg)
-
+ unsigned long base, unsigned dpl, unsigned flags,
+ unsigned short seg)
{
gate->a = (seg << 16) | (base & 0xffff);
gate->b = (base & 0xffff0000) |
@@ -84,22 +84,23 @@
#define load_TR_desc() native_load_tr_desc()
#define load_gdt(dtr) native_load_gdt(dtr)
#define load_idt(dtr) native_load_idt(dtr)
-#define load_tr(tr) __asm__ __volatile("ltr %0"::"m" (tr))
-#define load_ldt(ldt) __asm__ __volatile("lldt %0"::"m" (ldt))
+#define load_tr(tr) asm volatile("ltr %0"::"m" (tr))
+#define load_ldt(ldt) asm volatile("lldt %0"::"m" (ldt))
#define store_gdt(dtr) native_store_gdt(dtr)
#define store_idt(dtr) native_store_idt(dtr)
#define store_tr(tr) (tr = native_store_tr())
-#define store_ldt(ldt) __asm__ ("sldt %0":"=m" (ldt))
+#define store_ldt(ldt) asm("sldt %0":"=m" (ldt))
#define load_TLS(t, cpu) native_load_tls(t, cpu)
#define set_ldt native_set_ldt
-#define write_ldt_entry(dt, entry, desc) \
- native_write_ldt_entry(dt, entry, desc)
-#define write_gdt_entry(dt, entry, desc, type) \
- native_write_gdt_entry(dt, entry, desc, type)
-#define write_idt_entry(dt, entry, g) native_write_idt_entry(dt, entry, g)
+#define write_ldt_entry(dt, entry, desc) \
+ native_write_ldt_entry(dt, entry, desc)
+#define write_gdt_entry(dt, entry, desc, type) \
+ native_write_gdt_entry(dt, entry, desc, type)
+#define write_idt_entry(dt, entry, g) \
+ native_write_idt_entry(dt, entry, g)
#endif
static inline void native_write_idt_entry(gate_desc *idt, int entry,
@@ -138,8 +139,8 @@
{
desc->a = ((base & 0xffff) << 16) | (limit & 0xffff);
desc->b = (base & 0xff000000) | ((base & 0xff0000) >> 16) |
- (limit & 0x000f0000) | ((type & 0xff) << 8) |
- ((flags & 0xf) << 20);
+ (limit & 0x000f0000) | ((type & 0xff) << 8) |
+ ((flags & 0xf) << 20);
desc->p = 1;
}
@@ -159,7 +160,6 @@
desc->base2 = (PTR_MIDDLE(addr) >> 8) & 0xFF;
desc->base3 = PTR_HIGH(addr);
#else
-
pack_descriptor((struct desc_struct *)d, addr, size, 0x80 | type, 0);
#endif
}
@@ -177,7 +177,8 @@
* last valid byte
*/
set_tssldt_descriptor(&tss, (unsigned long)addr, DESC_TSS,
- IO_BITMAP_OFFSET + IO_BITMAP_BYTES + sizeof(unsigned long) - 1);
+ IO_BITMAP_OFFSET + IO_BITMAP_BYTES +
+ sizeof(unsigned long) - 1);
write_gdt_entry(d, entry, &tss, DESC_TSS);
}
@@ -186,7 +187,7 @@
static inline void native_set_ldt(const void *addr, unsigned int entries)
{
if (likely(entries == 0))
- __asm__ __volatile__("lldt %w0"::"q" (0));
+ asm volatile("lldt %w0"::"q" (0));
else {
unsigned cpu = smp_processor_id();
ldt_desc ldt;
@@ -195,7 +196,7 @@
DESC_LDT, entries * sizeof(ldt) - 1);
write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT,
&ldt, DESC_LDT);
- __asm__ __volatile__("lldt %w0"::"q" (GDT_ENTRY_LDT*8));
+ asm volatile("lldt %w0"::"q" (GDT_ENTRY_LDT*8));
}
}
@@ -240,15 +241,15 @@
gdt[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i];
}
-#define _LDT_empty(info) (\
- (info)->base_addr == 0 && \
- (info)->limit == 0 && \
- (info)->contents == 0 && \
- (info)->read_exec_only == 1 && \
- (info)->seg_32bit == 0 && \
- (info)->limit_in_pages == 0 && \
- (info)->seg_not_present == 1 && \
- (info)->useable == 0)
+#define _LDT_empty(info) \
+ ((info)->base_addr == 0 && \
+ (info)->limit == 0 && \
+ (info)->contents == 0 && \
+ (info)->read_exec_only == 1 && \
+ (info)->seg_32bit == 0 && \
+ (info)->limit_in_pages == 0 && \
+ (info)->seg_not_present == 1 && \
+ (info)->useable == 0)
#ifdef CONFIG_X86_64
#define LDT_empty(info) (_LDT_empty(info) && ((info)->lm == 0))
@@ -287,7 +288,7 @@
}
static inline void _set_gate(int gate, unsigned type, void *addr,
- unsigned dpl, unsigned ist, unsigned seg)
+ unsigned dpl, unsigned ist, unsigned seg)
{
gate_desc s;
pack_gate(&s, type, (unsigned long)addr, dpl, ist, seg);
@@ -370,10 +371,10 @@
* Will read the base address of GDT_ENTRY_ESPFIX_SS and put it into %eax.
*/
#define GET_DESC_BASE(idx, gdt, base, lo_w, lo_b, hi_b) \
- movb idx*8+4(gdt), lo_b; \
- movb idx*8+7(gdt), hi_b; \
- shll $16, base; \
- movw idx*8+2(gdt), lo_w;
+ movb idx * 8 + 4(gdt), lo_b; \
+ movb idx * 8 + 7(gdt), hi_b; \
+ shll $16, base; \
+ movw idx * 8 + 2(gdt), lo_w;
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-x86/desc_defs.h b/include/asm-x86/desc_defs.h
index e33f078..eccb4ea 100644
--- a/include/asm-x86/desc_defs.h
+++ b/include/asm-x86/desc_defs.h
@@ -18,17 +18,19 @@
* incrementally. We keep the signature as a struct, rather than an union,
* so we can get rid of it transparently in the future -- glommer
*/
-// 8 byte segment descriptor
+/* 8 byte segment descriptor */
struct desc_struct {
union {
- struct { unsigned int a, b; };
+ struct {
+ unsigned int a;
+ unsigned int b;
+ };
struct {
u16 limit0;
u16 base0;
unsigned base1: 8, type: 4, s: 1, dpl: 2, p: 1;
unsigned limit: 4, avl: 1, l: 1, d: 1, g: 1, base2: 8;
};
-
};
} __attribute__((packed));
@@ -39,7 +41,7 @@
GATE_TASK = 0x5,
};
-// 16byte gate
+/* 16byte gate */
struct gate_struct64 {
u16 offset_low;
u16 segment;
@@ -56,10 +58,10 @@
enum {
DESC_TSS = 0x9,
DESC_LDT = 0x2,
- DESCTYPE_S = 0x10, /* !system */
+ DESCTYPE_S = 0x10, /* !system */
};
-// LDT or TSS descriptor in the GDT. 16 bytes.
+/* LDT or TSS descriptor in the GDT. 16 bytes. */
struct ldttss_desc64 {
u16 limit0;
u16 base0;
@@ -84,7 +86,6 @@
unsigned long address;
} __attribute__((packed)) ;
-
#endif /* !__ASSEMBLY__ */
#endif
diff --git a/include/asm-x86/div64.h b/include/asm-x86/div64.h
index e98d16e..0dbf8bf 100644
--- a/include/asm-x86/div64.h
+++ b/include/asm-x86/div64.h
@@ -17,18 +17,20 @@
* This ends up being the most efficient "calling
* convention" on x86.
*/
-#define do_div(n,base) ({ \
- unsigned long __upper, __low, __high, __mod, __base; \
- __base = (base); \
- asm("":"=a" (__low), "=d" (__high):"A" (n)); \
- __upper = __high; \
- if (__high) { \
- __upper = __high % (__base); \
- __high = __high / (__base); \
- } \
- asm("divl %2":"=a" (__low), "=d" (__mod):"rm" (__base), "0" (__low), "1" (__upper)); \
- asm("":"=A" (n):"a" (__low),"d" (__high)); \
- __mod; \
+#define do_div(n, base) \
+({ \
+ unsigned long __upper, __low, __high, __mod, __base; \
+ __base = (base); \
+ asm("":"=a" (__low), "=d" (__high) : "A" (n)); \
+ __upper = __high; \
+ if (__high) { \
+ __upper = __high % (__base); \
+ __high = __high / (__base); \
+ } \
+ asm("divl %2":"=a" (__low), "=d" (__mod) \
+ : "rm" (__base), "0" (__low), "1" (__upper)); \
+ asm("":"=A" (n) : "a" (__low), "d" (__high)); \
+ __mod; \
})
/*
@@ -37,14 +39,13 @@
*
* Warning, this will do an exception if X overflows.
*/
-#define div_long_long_rem(a,b,c) div_ll_X_l_rem(a,b,c)
+#define div_long_long_rem(a, b, c) div_ll_X_l_rem(a, b, c)
-static inline long
-div_ll_X_l_rem(long long divs, long div, long *rem)
+static inline long div_ll_X_l_rem(long long divs, long div, long *rem)
{
long dum2;
- __asm__("divl %2":"=a"(dum2), "=d"(*rem)
- : "rm"(div), "A"(divs));
+ asm("divl %2":"=a"(dum2), "=d"(*rem)
+ : "rm"(div), "A"(divs));
return dum2;
diff --git a/include/asm-x86/dma.h b/include/asm-x86/dma.h
index e9733ce..ca1098a 100644
--- a/include/asm-x86/dma.h
+++ b/include/asm-x86/dma.h
@@ -12,7 +12,6 @@
#include <asm/io.h> /* need byte IO */
#include <linux/delay.h>
-
#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
#define dma_outb outb_p
#else
@@ -74,15 +73,15 @@
#ifdef CONFIG_X86_32
/* The maximum address that we can perform a DMA transfer to on this platform */
-#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x1000000)
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x1000000)
#else
/* 16MB ISA DMA zone */
-#define MAX_DMA_PFN ((16*1024*1024) >> PAGE_SHIFT)
+#define MAX_DMA_PFN ((16 * 1024 * 1024) >> PAGE_SHIFT)
/* 4GB broken PCI/AGP hardware bus master zone */
-#define MAX_DMA32_PFN ((4UL*1024*1024*1024) >> PAGE_SHIFT)
+#define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
/* Compat define for old dma zone */
#define MAX_DMA_ADDRESS ((unsigned long)__va(MAX_DMA_PFN << PAGE_SHIFT))
@@ -154,20 +153,20 @@
extern spinlock_t dma_spin_lock;
-static __inline__ unsigned long claim_dma_lock(void)
+static inline unsigned long claim_dma_lock(void)
{
unsigned long flags;
spin_lock_irqsave(&dma_spin_lock, flags);
return flags;
}
-static __inline__ void release_dma_lock(unsigned long flags)
+static inline void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&dma_spin_lock, flags);
}
/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
+static inline void enable_dma(unsigned int dmanr)
{
if (dmanr <= 3)
dma_outb(dmanr, DMA1_MASK_REG);
@@ -175,7 +174,7 @@
dma_outb(dmanr & 3, DMA2_MASK_REG);
}
-static __inline__ void disable_dma(unsigned int dmanr)
+static inline void disable_dma(unsigned int dmanr)
{
if (dmanr <= 3)
dma_outb(dmanr | 4, DMA1_MASK_REG);
@@ -190,7 +189,7 @@
* --- In order to do that, the DMA routines below should ---
* --- only be used while holding the DMA lock ! ---
*/
-static __inline__ void clear_dma_ff(unsigned int dmanr)
+static inline void clear_dma_ff(unsigned int dmanr)
{
if (dmanr <= 3)
dma_outb(0, DMA1_CLEAR_FF_REG);
@@ -199,7 +198,7 @@
}
/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+static inline void set_dma_mode(unsigned int dmanr, char mode)
{
if (dmanr <= 3)
dma_outb(mode | dmanr, DMA1_MODE_REG);
@@ -212,7 +211,7 @@
* the lower 16 bits of the DMA current address register, but a 64k boundary
* may have been crossed.
*/
-static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
{
switch (dmanr) {
case 0:
@@ -243,15 +242,15 @@
/* Set transfer address & page bits for specific DMA channel.
* Assumes dma flipflop is clear.
*/
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
{
set_dma_page(dmanr, a>>16);
if (dmanr <= 3) {
dma_outb(a & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
dma_outb((a >> 8) & 0xff, ((dmanr & 3) << 1) + IO_DMA1_BASE);
} else {
- dma_outb((a >> 1) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
- dma_outb((a >> 9) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+ dma_outb((a >> 1) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
+ dma_outb((a >> 9) & 0xff, ((dmanr & 3) << 2) + IO_DMA2_BASE);
}
}
@@ -264,18 +263,18 @@
* Assumes dma flip-flop is clear.
* NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
*/
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
{
count--;
if (dmanr <= 3) {
- dma_outb(count & 0xff, ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
- dma_outb((count >> 8) & 0xff,
- ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+ dma_outb(count & 0xff, ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+ dma_outb((count >> 8) & 0xff,
+ ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
} else {
- dma_outb((count >> 1) & 0xff,
- ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
- dma_outb((count >> 9) & 0xff,
- ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+ dma_outb((count >> 1) & 0xff,
+ ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+ dma_outb((count >> 9) & 0xff,
+ ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
}
}
@@ -288,7 +287,7 @@
*
* Assumes DMA flip-flop is clear.
*/
-static __inline__ int get_dma_residue(unsigned int dmanr)
+static inline int get_dma_residue(unsigned int dmanr)
{
unsigned int io_port;
/* using short to get 16-bit wrap around */
diff --git a/include/asm-x86/dwarf2_64.h b/include/asm-x86/dwarf2_64.h
index eedc085..c950519 100644
--- a/include/asm-x86/dwarf2_64.h
+++ b/include/asm-x86/dwarf2_64.h
@@ -1,16 +1,15 @@
#ifndef _DWARF2_H
#define _DWARF2_H 1
-
#ifndef __ASSEMBLY__
#warning "asm/dwarf2.h should be only included in pure assembly files"
#endif
-/*
+/*
Macros for dwarf2 CFI unwind table entries.
- See "as.info" for details on these pseudo ops. Unfortunately
- they are only supported in very new binutils, so define them
- away for older version.
+ See "as.info" for details on these pseudo ops. Unfortunately
+ they are only supported in very new binutils, so define them
+ away for older version.
*/
#ifdef CONFIG_AS_CFI
diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h
index e7207a6..43b1a8b 100644
--- a/include/asm-x86/e820_32.h
+++ b/include/asm-x86/e820_32.h
@@ -34,8 +34,8 @@
extern void limit_regions(unsigned long long size);
extern void print_memory_map(char *who);
extern void init_iomem_resources(struct resource *code_resource,
- struct resource *data_resource,
- struct resource *bss_resource);
+ struct resource *data_resource,
+ struct resource *bss_resource);
#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION)
extern void e820_mark_nosave_regions(void);
diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h
index 22ede73..f478c57 100644
--- a/include/asm-x86/e820_64.h
+++ b/include/asm-x86/e820_64.h
@@ -14,20 +14,24 @@
#include <linux/ioport.h>
#ifndef __ASSEMBLY__
-extern unsigned long find_e820_area(unsigned long start, unsigned long end,
- unsigned size, unsigned long align);
-extern void add_memory_region(unsigned long start, unsigned long size,
+extern unsigned long find_e820_area(unsigned long start, unsigned long end,
+ unsigned long size, unsigned long align);
+extern unsigned long find_e820_area_size(unsigned long start,
+ unsigned long *sizep,
+ unsigned long align);
+extern void add_memory_region(unsigned long start, unsigned long size,
int type);
extern void update_memory_range(u64 start, u64 size, unsigned old_type,
unsigned new_type);
extern void setup_memory_region(void);
-extern void contig_e820_setup(void);
+extern void contig_e820_setup(void);
extern unsigned long e820_end_of_ram(void);
-extern void e820_reserve_resources(struct resource *code_resource,
- struct resource *data_resource, struct resource *bss_resource);
+extern void e820_reserve_resources(void);
extern void e820_mark_nosave_regions(void);
-extern int e820_any_mapped(unsigned long start, unsigned long end, unsigned type);
-extern int e820_all_mapped(unsigned long start, unsigned long end, unsigned type);
+extern int e820_any_mapped(unsigned long start, unsigned long end,
+ unsigned type);
+extern int e820_all_mapped(unsigned long start, unsigned long end,
+ unsigned type);
extern int e820_any_non_reserved(unsigned long start, unsigned long end);
extern int is_memory_any_valid(unsigned long start, unsigned long end);
extern int e820_all_non_reserved(unsigned long start, unsigned long end);
@@ -35,8 +39,8 @@
extern unsigned long e820_hole_size(unsigned long start, unsigned long end);
extern void e820_setup_gap(void);
-extern void e820_register_active_regions(int nid,
- unsigned long start_pfn, unsigned long end_pfn);
+extern void e820_register_active_regions(int nid, unsigned long start_pfn,
+ unsigned long end_pfn);
extern void finish_e820_parsing(void);
diff --git a/include/asm-x86/edac.h b/include/asm-x86/edac.h
index cf3200a..a8088f6 100644
--- a/include/asm-x86/edac.h
+++ b/include/asm-x86/edac.h
@@ -3,7 +3,7 @@
/* ECC atomic, DMA, SMP and interrupt safe scrub function */
-static __inline__ void atomic_scrub(void *va, u32 size)
+static inline void atomic_scrub(void *va, u32 size)
{
u32 i, *virt_addr = va;
@@ -12,7 +12,7 @@
* are interrupt, DMA and SMP safe.
*/
for (i = 0; i < size / 4; i++, virt_addr++)
- __asm__ __volatile__("lock; addl $0, %0"::"m"(*virt_addr));
+ asm volatile("lock; addl $0, %0"::"m" (*virt_addr));
}
#endif
diff --git a/include/asm-x86/efi.h b/include/asm-x86/efi.h
index ea9734b..d53004b 100644
--- a/include/asm-x86/efi.h
+++ b/include/asm-x86/efi.h
@@ -20,7 +20,7 @@
*/
#define efi_call_virt(f, args...) \
- ((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args)
+ ((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args)
#define efi_call_virt0(f) efi_call_virt(f)
#define efi_call_virt1(f, a1) efi_call_virt(f, a1)
diff --git a/include/asm-x86/elf.h b/include/asm-x86/elf.h
index fb62f99..8f232dc 100644
--- a/include/asm-x86/elf.h
+++ b/include/asm-x86/elf.h
@@ -11,7 +11,7 @@
typedef unsigned long elf_greg_t;
-#define ELF_NGREG (sizeof (struct user_regs_struct) / sizeof(elf_greg_t))
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
typedef struct user_i387_struct elf_fpregset_t;
@@ -82,8 +82,9 @@
#define elf_check_arch_ia32(x) \
(((x)->e_machine == EM_386) || ((x)->e_machine == EM_486))
-#ifdef CONFIG_X86_32
#include <asm/processor.h>
+
+#ifdef CONFIG_X86_32
#include <asm/system.h> /* for savesegment */
#include <asm/desc.h>
@@ -99,10 +100,11 @@
We might as well make sure everything else is cleared too (except for %esp),
just to make things more deterministic.
*/
-#define ELF_PLAT_INIT(_r, load_addr) do { \
- _r->bx = 0; _r->cx = 0; _r->dx = 0; \
- _r->si = 0; _r->di = 0; _r->bp = 0; \
- _r->ax = 0; \
+#define ELF_PLAT_INIT(_r, load_addr) \
+ do { \
+ _r->bx = 0; _r->cx = 0; _r->dx = 0; \
+ _r->si = 0; _r->di = 0; _r->bp = 0; \
+ _r->ax = 0; \
} while (0)
/*
@@ -110,24 +112,25 @@
* now struct_user_regs, they are different)
*/
-#define ELF_CORE_COPY_REGS(pr_reg, regs) do { \
- pr_reg[0] = regs->bx; \
- pr_reg[1] = regs->cx; \
- pr_reg[2] = regs->dx; \
- pr_reg[3] = regs->si; \
- pr_reg[4] = regs->di; \
- pr_reg[5] = regs->bp; \
- pr_reg[6] = regs->ax; \
- pr_reg[7] = regs->ds & 0xffff; \
- pr_reg[8] = regs->es & 0xffff; \
- pr_reg[9] = regs->fs & 0xffff; \
- savesegment(gs, pr_reg[10]); \
- pr_reg[11] = regs->orig_ax; \
- pr_reg[12] = regs->ip; \
- pr_reg[13] = regs->cs & 0xffff; \
- pr_reg[14] = regs->flags; \
- pr_reg[15] = regs->sp; \
- pr_reg[16] = regs->ss & 0xffff; \
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+do { \
+ pr_reg[0] = regs->bx; \
+ pr_reg[1] = regs->cx; \
+ pr_reg[2] = regs->dx; \
+ pr_reg[3] = regs->si; \
+ pr_reg[4] = regs->di; \
+ pr_reg[5] = regs->bp; \
+ pr_reg[6] = regs->ax; \
+ pr_reg[7] = regs->ds & 0xffff; \
+ pr_reg[8] = regs->es & 0xffff; \
+ pr_reg[9] = regs->fs & 0xffff; \
+ savesegment(gs, pr_reg[10]); \
+ pr_reg[11] = regs->orig_ax; \
+ pr_reg[12] = regs->ip; \
+ pr_reg[13] = regs->cs & 0xffff; \
+ pr_reg[14] = regs->flags; \
+ pr_reg[15] = regs->sp; \
+ pr_reg[16] = regs->ss & 0xffff; \
} while (0);
#define ELF_PLATFORM (utsname()->machine)
@@ -135,12 +138,10 @@
#else /* CONFIG_X86_32 */
-#include <asm/processor.h>
-
/*
* This is used to ensure we don't load something for the wrong architecture.
*/
-#define elf_check_arch(x) \
+#define elf_check_arch(x) \
((x)->e_machine == EM_X86_64)
#define compat_elf_check_arch(x) elf_check_arch_ia32(x)
@@ -169,24 +170,30 @@
t->ds = t->es = ds;
}
-#define ELF_PLAT_INIT(_r, load_addr) do { \
- elf_common_init(¤t->thread, _r, 0); \
- clear_thread_flag(TIF_IA32); \
+#define ELF_PLAT_INIT(_r, load_addr) \
+do { \
+ elf_common_init(¤t->thread, _r, 0); \
+ clear_thread_flag(TIF_IA32); \
} while (0)
-#define COMPAT_ELF_PLAT_INIT(regs, load_addr) \
+#define COMPAT_ELF_PLAT_INIT(regs, load_addr) \
elf_common_init(¤t->thread, regs, __USER_DS)
-#define compat_start_thread(regs, ip, sp) do { \
- start_ia32_thread(regs, ip, sp); \
- set_fs(USER_DS); \
- } while (0)
-#define COMPAT_SET_PERSONALITY(ex, ibcs2) do { \
- if (test_thread_flag(TIF_IA32)) \
- clear_thread_flag(TIF_ABI_PENDING); \
- else \
- set_thread_flag(TIF_ABI_PENDING); \
- current->personality |= force_personality32; \
- } while (0)
+
+#define compat_start_thread(regs, ip, sp) \
+do { \
+ start_ia32_thread(regs, ip, sp); \
+ set_fs(USER_DS); \
+} while (0)
+
+#define COMPAT_SET_PERSONALITY(ex, ibcs2) \
+do { \
+ if (test_thread_flag(TIF_IA32)) \
+ clear_thread_flag(TIF_ABI_PENDING); \
+ else \
+ set_thread_flag(TIF_ABI_PENDING); \
+ current->personality |= force_personality32; \
+} while (0)
+
#define COMPAT_ELF_PLATFORM ("i686")
/*
@@ -195,7 +202,8 @@
* getting dumped.
*/
-#define ELF_CORE_COPY_REGS(pr_reg, regs) do { \
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+do { \
unsigned v; \
(pr_reg)[0] = (regs)->r15; \
(pr_reg)[1] = (regs)->r14; \
@@ -269,10 +277,12 @@
struct task_struct;
-#define ARCH_DLINFO_IA32(vdso_enabled) \
-do if (vdso_enabled) { \
+#define ARCH_DLINFO_IA32(vdso_enabled) \
+do { \
+ if (vdso_enabled) { \
NEW_AUX_ENT(AT_SYSINFO, VDSO_ENTRY); \
NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE); \
+ } \
} while (0)
#ifdef CONFIG_X86_32
@@ -290,9 +300,11 @@
/* 1GB for 64bit, 8MB for 32bit */
#define STACK_RND_MASK (test_thread_flag(TIF_IA32) ? 0x7ff : 0x3fffff)
-#define ARCH_DLINFO \
-do if (vdso_enabled) { \
- NEW_AUX_ENT(AT_SYSINFO_EHDR,(unsigned long)current->mm->context.vdso);\
+#define ARCH_DLINFO \
+do { \
+ if (vdso_enabled) \
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, \
+ (unsigned long)current->mm->context.vdso); \
} while (0)
#define AT_SYSINFO 32
@@ -305,8 +317,8 @@
#define VDSO_CURRENT_BASE ((unsigned long)current->mm->context.vdso)
-#define VDSO_ENTRY \
- ((unsigned long) VDSO32_SYMBOL(VDSO_CURRENT_BASE, vsyscall))
+#define VDSO_ENTRY \
+ ((unsigned long)VDSO32_SYMBOL(VDSO_CURRENT_BASE, vsyscall))
struct linux_binprm;
diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h
index a7404d5..eb16651 100644
--- a/include/asm-x86/fixmap_32.h
+++ b/include/asm-x86/fixmap_32.h
@@ -99,8 +99,7 @@
*/
#define NR_FIX_BTMAPS 64
#define FIX_BTMAPS_NESTING 4
- FIX_BTMAP_END =
- __end_of_permanent_fixed_addresses + 512 -
+ FIX_BTMAP_END = __end_of_permanent_fixed_addresses + 512 -
(__end_of_permanent_fixed_addresses & 511),
FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_NESTING - 1,
FIX_WP_TEST,
@@ -110,20 +109,20 @@
__end_of_fixed_addresses
};
-extern void __set_fixmap (enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags);
+extern void __set_fixmap(enum fixed_addresses idx,
+ unsigned long phys, pgprot_t flags);
extern void reserve_top_address(unsigned long reserve);
-#define set_fixmap(idx, phys) \
- __set_fixmap(idx, phys, PAGE_KERNEL)
+#define set_fixmap(idx, phys) \
+ __set_fixmap(idx, phys, PAGE_KERNEL)
/*
* Some hardware wants to get fixmapped without caching.
*/
-#define set_fixmap_nocache(idx, phys) \
- __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+#define set_fixmap_nocache(idx, phys) \
+ __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
-#define clear_fixmap(idx) \
- __set_fixmap(idx, 0, __pgprot(0))
+#define clear_fixmap(idx) \
+ __set_fixmap(idx, 0, __pgprot(0))
#define FIXADDR_TOP ((unsigned long)__FIXADDR_TOP)
@@ -156,7 +155,7 @@
if (idx >= __end_of_fixed_addresses)
__this_fixmap_does_not_exist();
- return __fix_to_virt(idx);
+ return __fix_to_virt(idx);
}
static inline unsigned long virt_to_fix(const unsigned long vaddr)
diff --git a/include/asm-x86/fixmap_64.h b/include/asm-x86/fixmap_64.h
index 70ddb21..f3d7685 100644
--- a/include/asm-x86/fixmap_64.h
+++ b/include/asm-x86/fixmap_64.h
@@ -34,32 +34,34 @@
enum fixed_addresses {
VSYSCALL_LAST_PAGE,
- VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
+ VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE
+ + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1,
VSYSCALL_HPET,
FIX_DBGP_BASE,
FIX_EARLYCON_MEM_BASE,
FIX_HPET_BASE,
FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */
FIX_IO_APIC_BASE_0,
- FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS-1,
+ FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
FIX_EFI_IO_MAP_LAST_PAGE,
- FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE+MAX_EFI_IO_PAGES-1,
+ FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
+ + MAX_EFI_IO_PAGES - 1,
#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
FIX_OHCI1394_BASE,
#endif
__end_of_fixed_addresses
};
-extern void __set_fixmap (enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags);
+extern void __set_fixmap(enum fixed_addresses idx,
+ unsigned long phys, pgprot_t flags);
-#define set_fixmap(idx, phys) \
- __set_fixmap(idx, phys, PAGE_KERNEL)
+#define set_fixmap(idx, phys) \
+ __set_fixmap(idx, phys, PAGE_KERNEL)
/*
* Some hardware wants to get fixmapped without caching.
*/
-#define set_fixmap_nocache(idx, phys) \
- __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+#define set_fixmap_nocache(idx, phys) \
+ __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
#define FIXADDR_TOP (VSYSCALL_END-PAGE_SIZE)
#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
diff --git a/include/asm-x86/floppy.h b/include/asm-x86/floppy.h
index a48d715..dbe82a5 100644
--- a/include/asm-x86/floppy.h
+++ b/include/asm-x86/floppy.h
@@ -20,20 +20,21 @@
* driver otherwise. It doesn't matter much for performance anyway, as most
* floppy accesses go through the track buffer.
*/
-#define _CROSS_64KB(a,s,vdma) \
-(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
+#define _CROSS_64KB(a, s, vdma) \
+ (!(vdma) && \
+ ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
+#define CROSS_64KB(a, s) _CROSS_64KB(a, s, use_virtual_dma & 1)
-#define SW fd_routine[use_virtual_dma&1]
+#define SW fd_routine[use_virtual_dma & 1]
#define CSW fd_routine[can_use_virtual_dma & 1]
#define fd_inb(port) inb_p(port)
-#define fd_outb(value,port) outb_p(value,port)
+#define fd_outb(value, port) outb_p(value, port)
-#define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy")
+#define fd_request_dma() CSW._request_dma(FLOPPY_DMA, "floppy")
#define fd_free_dma() CSW._free_dma(FLOPPY_DMA)
#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
@@ -52,64 +53,64 @@
static irqreturn_t floppy_hardint(int irq, void *dev_id)
{
- register unsigned char st;
+ unsigned char st;
#undef TRACE_FLPY_INT
#ifdef TRACE_FLPY_INT
- static int calls=0;
- static int bytes=0;
- static int dma_wait=0;
+ static int calls;
+ static int bytes;
+ static int dma_wait;
#endif
if (!doing_pdma)
return floppy_interrupt(irq, dev_id);
#ifdef TRACE_FLPY_INT
- if(!calls)
+ if (!calls)
bytes = virtual_dma_count;
#endif
{
- register int lcount;
- register char *lptr;
+ int lcount;
+ char *lptr;
st = 1;
- for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
- lcount; lcount--, lptr++) {
- st=inb(virtual_dma_port+4) & 0xa0 ;
- if(st != 0xa0)
+ for (lcount = virtual_dma_count, lptr = virtual_dma_addr;
+ lcount; lcount--, lptr++) {
+ st = inb(virtual_dma_port + 4) & 0xa0;
+ if (st != 0xa0)
break;
- if(virtual_dma_mode)
- outb_p(*lptr, virtual_dma_port+5);
+ if (virtual_dma_mode)
+ outb_p(*lptr, virtual_dma_port + 5);
else
- *lptr = inb_p(virtual_dma_port+5);
+ *lptr = inb_p(virtual_dma_port + 5);
}
virtual_dma_count = lcount;
virtual_dma_addr = lptr;
- st = inb(virtual_dma_port+4);
+ st = inb(virtual_dma_port + 4);
}
#ifdef TRACE_FLPY_INT
calls++;
#endif
- if(st == 0x20)
+ if (st == 0x20)
return IRQ_HANDLED;
- if(!(st & 0x20)) {
+ if (!(st & 0x20)) {
virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
+ virtual_dma_count = 0;
#ifdef TRACE_FLPY_INT
printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
virtual_dma_count, virtual_dma_residue, calls, bytes,
dma_wait);
calls = 0;
- dma_wait=0;
+ dma_wait = 0;
#endif
doing_pdma = 0;
floppy_interrupt(irq, dev_id);
return IRQ_HANDLED;
}
#ifdef TRACE_FLPY_INT
- if(!virtual_dma_count)
+ if (!virtual_dma_count)
dma_wait++;
#endif
return IRQ_HANDLED;
@@ -117,14 +118,14 @@
static void fd_disable_dma(void)
{
- if(! (can_use_virtual_dma & 1))
+ if (!(can_use_virtual_dma & 1))
disable_dma(FLOPPY_DMA);
doing_pdma = 0;
virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
+ virtual_dma_count = 0;
}
-static int vdma_request_dma(unsigned int dmanr, const char * device_id)
+static int vdma_request_dma(unsigned int dmanr, const char *device_id)
{
return 0;
}
@@ -142,7 +143,7 @@
static int fd_request_irq(void)
{
- if(can_use_virtual_dma)
+ if (can_use_virtual_dma)
return request_irq(FLOPPY_IRQ, floppy_hardint,
IRQF_DISABLED, "floppy", NULL);
else
@@ -152,13 +153,13 @@
static unsigned long dma_mem_alloc(unsigned long size)
{
- return __get_dma_pages(GFP_KERNEL|__GFP_NORETRY,get_order(size));
+ return __get_dma_pages(GFP_KERNEL|__GFP_NORETRY, get_order(size));
}
static unsigned long vdma_mem_alloc(unsigned long size)
{
- return (unsigned long) vmalloc(size);
+ return (unsigned long)vmalloc(size);
}
@@ -166,7 +167,7 @@
static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
{
- if((unsigned long) addr >= (unsigned long) high_memory)
+ if ((unsigned long)addr >= (unsigned long)high_memory)
vfree((void *)addr);
else
free_pages(addr, get_order(size));
@@ -176,10 +177,10 @@
static void _fd_chose_dma_mode(char *addr, unsigned long size)
{
- if(can_use_virtual_dma == 2) {
- if((unsigned long) addr >= (unsigned long) high_memory ||
- isa_virt_to_bus(addr) >= 0x1000000 ||
- _CROSS_64KB(addr, size, 0))
+ if (can_use_virtual_dma == 2) {
+ if ((unsigned long)addr >= (unsigned long)high_memory ||
+ isa_virt_to_bus(addr) >= 0x1000000 ||
+ _CROSS_64KB(addr, size, 0))
use_virtual_dma = 1;
else
use_virtual_dma = 0;
@@ -195,7 +196,7 @@
{
doing_pdma = 1;
virtual_dma_port = io;
- virtual_dma_mode = (mode == DMA_MODE_WRITE);
+ virtual_dma_mode = (mode == DMA_MODE_WRITE);
virtual_dma_addr = addr;
virtual_dma_count = size;
virtual_dma_residue = 0;
@@ -213,18 +214,18 @@
/* actual, physical DMA */
doing_pdma = 0;
clear_dma_ff(FLOPPY_DMA);
- set_dma_mode(FLOPPY_DMA,mode);
- set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr));
- set_dma_count(FLOPPY_DMA,size);
+ set_dma_mode(FLOPPY_DMA, mode);
+ set_dma_addr(FLOPPY_DMA, isa_virt_to_bus(addr));
+ set_dma_count(FLOPPY_DMA, size);
enable_dma(FLOPPY_DMA);
return 0;
}
static struct fd_routine_l {
- int (*_request_dma)(unsigned int dmanr, const char * device_id);
+ int (*_request_dma)(unsigned int dmanr, const char *device_id);
void (*_free_dma)(unsigned int dmanr);
int (*_get_dma_residue)(unsigned int dummy);
- unsigned long (*_dma_mem_alloc) (unsigned long size);
+ unsigned long (*_dma_mem_alloc)(unsigned long size);
int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
} fd_routine[] = {
{
@@ -252,7 +253,8 @@
* is needed to prevent corrupted CMOS RAM in case "insmod floppy"
* coincides with another rtc CMOS user. Paul G.
*/
-#define FLOPPY0_TYPE ({ \
+#define FLOPPY0_TYPE \
+({ \
unsigned long flags; \
unsigned char val; \
spin_lock_irqsave(&rtc_lock, flags); \
@@ -261,7 +263,8 @@
val; \
})
-#define FLOPPY1_TYPE ({ \
+#define FLOPPY1_TYPE \
+({ \
unsigned long flags; \
unsigned char val; \
spin_lock_irqsave(&rtc_lock, flags); \
diff --git a/include/asm-x86/futex.h b/include/asm-x86/futex.h
index c9952ea..ac0fbf2 100644
--- a/include/asm-x86/futex.h
+++ b/include/asm-x86/futex.h
@@ -12,35 +12,32 @@
#include <asm/uaccess.h>
#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg) \
- __asm__ __volatile( \
-"1: " insn "\n" \
-"2: .section .fixup,\"ax\"\n \
-3: mov %3, %1\n \
- jmp 2b\n \
- .previous\n" \
- _ASM_EXTABLE(1b,3b) \
- : "=r" (oldval), "=r" (ret), "+m" (*uaddr) \
- : "i" (-EFAULT), "0" (oparg), "1" (0))
+ asm volatile("1:\t" insn "\n" \
+ "2:\t.section .fixup,\"ax\"\n" \
+ "3:\tmov\t%3, %1\n" \
+ "\tjmp\t2b\n" \
+ "\t.previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r" (oldval), "=r" (ret), "+m" (*uaddr) \
+ : "i" (-EFAULT), "0" (oparg), "1" (0))
#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg) \
- __asm__ __volatile( \
-"1: movl %2, %0\n \
- movl %0, %3\n" \
- insn "\n" \
-"2: lock; cmpxchgl %3, %2\n \
- jnz 1b\n \
-3: .section .fixup,\"ax\"\n \
-4: mov %5, %1\n \
- jmp 3b\n \
- .previous\n" \
- _ASM_EXTABLE(1b,4b) \
- _ASM_EXTABLE(2b,4b) \
- : "=&a" (oldval), "=&r" (ret), "+m" (*uaddr), \
- "=&r" (tem) \
- : "r" (oparg), "i" (-EFAULT), "1" (0))
+ asm volatile("1:\tmovl %2, %0\n" \
+ "\tmovl\t%0, %3\n" \
+ "\t" insn "\n" \
+ "2:\tlock; cmpxchgl %3, %2\n" \
+ "\tjnz\t1b\n" \
+ "3:\t.section .fixup,\"ax\"\n" \
+ "4:\tmov\t%5, %1\n" \
+ "\tjmp\t3b\n" \
+ "\t.previous\n" \
+ _ASM_EXTABLE(1b, 4b) \
+ _ASM_EXTABLE(2b, 4b) \
+ : "=&a" (oldval), "=&r" (ret), \
+ "+m" (*uaddr), "=&r" (tem) \
+ : "r" (oparg), "i" (-EFAULT), "1" (0))
-static inline int
-futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
{
int op = (encoded_op >> 28) & 7;
int cmp = (encoded_op >> 24) & 15;
@@ -87,20 +84,33 @@
if (!ret) {
switch (cmp) {
- case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
- case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
- case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
- case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
- case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
- case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
- default: ret = -ENOSYS;
+ case FUTEX_OP_CMP_EQ:
+ ret = (oldval == cmparg);
+ break;
+ case FUTEX_OP_CMP_NE:
+ ret = (oldval != cmparg);
+ break;
+ case FUTEX_OP_CMP_LT:
+ ret = (oldval < cmparg);
+ break;
+ case FUTEX_OP_CMP_GE:
+ ret = (oldval >= cmparg);
+ break;
+ case FUTEX_OP_CMP_LE:
+ ret = (oldval <= cmparg);
+ break;
+ case FUTEX_OP_CMP_GT:
+ ret = (oldval > cmparg);
+ break;
+ default:
+ ret = -ENOSYS;
}
}
return ret;
}
-static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval,
+ int newval)
{
#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_BSWAP)
@@ -112,16 +122,15 @@
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
- __asm__ __volatile__(
- "1: lock; cmpxchgl %3, %1 \n"
- "2: .section .fixup, \"ax\" \n"
- "3: mov %2, %0 \n"
- " jmp 2b \n"
- " .previous \n"
- _ASM_EXTABLE(1b,3b)
- : "=a" (oldval), "+m" (*uaddr)
- : "i" (-EFAULT), "r" (newval), "0" (oldval)
- : "memory"
+ asm volatile("1:\tlock; cmpxchgl %3, %1\n"
+ "2:\t.section .fixup, \"ax\"\n"
+ "3:\tmov %2, %0\n"
+ "\tjmp 2b\n"
+ "\t.previous\n"
+ _ASM_EXTABLE(1b, 3b)
+ : "=a" (oldval), "+m" (*uaddr)
+ : "i" (-EFAULT), "r" (newval), "0" (oldval)
+ : "memory"
);
return oldval;
diff --git a/include/asm-x86/genapic_32.h b/include/asm-x86/genapic_32.h
index 33e3ffe..f1b9693 100644
--- a/include/asm-x86/genapic_32.h
+++ b/include/asm-x86/genapic_32.h
@@ -14,23 +14,22 @@
* Copyright 2003 Andi Kleen, SuSE Labs.
*/
-struct mpc_config_translation;
struct mpc_config_bus;
struct mp_config_table;
struct mpc_config_processor;
-struct genapic {
- char *name;
- int (*probe)(void);
+struct genapic {
+ char *name;
+ int (*probe)(void);
int (*apic_id_registered)(void);
cpumask_t (*target_cpus)(void);
int int_delivery_mode;
- int int_dest_mode;
+ int int_dest_mode;
int ESR_DISABLE;
int apic_destination_logical;
unsigned long (*check_apicid_used)(physid_mask_t bitmap, int apicid);
- unsigned long (*check_apicid_present)(int apicid);
+ unsigned long (*check_apicid_present)(int apicid);
int no_balance_irq;
int no_ioapic_check;
void (*init_apic_ldr)(void);
@@ -38,28 +37,21 @@
void (*setup_apic_routing)(void);
int (*multi_timer_check)(int apic, int irq);
- int (*apicid_to_node)(int logical_apicid);
+ int (*apicid_to_node)(int logical_apicid);
int (*cpu_to_logical_apicid)(int cpu);
int (*cpu_present_to_apicid)(int mps_cpu);
physid_mask_t (*apicid_to_cpu_present)(int phys_apicid);
- int (*mpc_apic_id)(struct mpc_config_processor *m,
- struct mpc_config_translation *t);
- void (*setup_portio_remap)(void);
+ void (*setup_portio_remap)(void);
int (*check_phys_apicid_present)(int boot_cpu_physical_apicid);
void (*enable_apic_mode)(void);
u32 (*phys_pkg_id)(u32 cpuid_apic, int index_msb);
/* mpparse */
- void (*mpc_oem_bus_info)(struct mpc_config_bus *, char *,
- struct mpc_config_translation *);
- void (*mpc_oem_pci_bus)(struct mpc_config_bus *,
- struct mpc_config_translation *);
-
/* When one of the next two hooks returns 1 the genapic
- is switched to this. Essentially they are additional probe
+ is switched to this. Essentially they are additional probe
functions. */
- int (*mps_oem_check)(struct mp_config_table *mpc, char *oem,
- char *productid);
+ int (*mps_oem_check)(struct mp_config_table *mpc, char *oem,
+ char *productid);
int (*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
unsigned (*get_apic_id)(unsigned long x);
@@ -72,7 +64,7 @@
void (*send_IPI_allbutself)(int vector);
void (*send_IPI_all)(int vector);
#endif
-};
+};
#define APICFUNC(x) .x = x,
@@ -85,43 +77,46 @@
#define IPIFUNC(x)
#endif
-#define APIC_INIT(aname, aprobe) { \
- .name = aname, \
- .probe = aprobe, \
- .int_delivery_mode = INT_DELIVERY_MODE, \
- .int_dest_mode = INT_DEST_MODE, \
- .no_balance_irq = NO_BALANCE_IRQ, \
- .ESR_DISABLE = esr_disable, \
- .apic_destination_logical = APIC_DEST_LOGICAL, \
- APICFUNC(apic_id_registered) \
- APICFUNC(target_cpus) \
- APICFUNC(check_apicid_used) \
- APICFUNC(check_apicid_present) \
- APICFUNC(init_apic_ldr) \
- APICFUNC(ioapic_phys_id_map) \
- APICFUNC(setup_apic_routing) \
- APICFUNC(multi_timer_check) \
- APICFUNC(apicid_to_node) \
- APICFUNC(cpu_to_logical_apicid) \
- APICFUNC(cpu_present_to_apicid) \
- APICFUNC(apicid_to_cpu_present) \
- APICFUNC(mpc_apic_id) \
- APICFUNC(setup_portio_remap) \
- APICFUNC(check_phys_apicid_present) \
- APICFUNC(mpc_oem_bus_info) \
- APICFUNC(mpc_oem_pci_bus) \
- APICFUNC(mps_oem_check) \
- APICFUNC(get_apic_id) \
- .apic_id_mask = APIC_ID_MASK, \
- APICFUNC(cpu_mask_to_apicid) \
- APICFUNC(acpi_madt_oem_check) \
- IPIFUNC(send_IPI_mask) \
- IPIFUNC(send_IPI_allbutself) \
- IPIFUNC(send_IPI_all) \
- APICFUNC(enable_apic_mode) \
- APICFUNC(phys_pkg_id) \
- }
+#define APIC_INIT(aname, aprobe) \
+{ \
+ .name = aname, \
+ .probe = aprobe, \
+ .int_delivery_mode = INT_DELIVERY_MODE, \
+ .int_dest_mode = INT_DEST_MODE, \
+ .no_balance_irq = NO_BALANCE_IRQ, \
+ .ESR_DISABLE = esr_disable, \
+ .apic_destination_logical = APIC_DEST_LOGICAL, \
+ APICFUNC(apic_id_registered) \
+ APICFUNC(target_cpus) \
+ APICFUNC(check_apicid_used) \
+ APICFUNC(check_apicid_present) \
+ APICFUNC(init_apic_ldr) \
+ APICFUNC(ioapic_phys_id_map) \
+ APICFUNC(setup_apic_routing) \
+ APICFUNC(multi_timer_check) \
+ APICFUNC(apicid_to_node) \
+ APICFUNC(cpu_to_logical_apicid) \
+ APICFUNC(cpu_present_to_apicid) \
+ APICFUNC(apicid_to_cpu_present) \
+ APICFUNC(setup_portio_remap) \
+ APICFUNC(check_phys_apicid_present) \
+ APICFUNC(mps_oem_check) \
+ APICFUNC(get_apic_id) \
+ .apic_id_mask = APIC_ID_MASK, \
+ APICFUNC(cpu_mask_to_apicid) \
+ APICFUNC(acpi_madt_oem_check) \
+ IPIFUNC(send_IPI_mask) \
+ IPIFUNC(send_IPI_allbutself) \
+ IPIFUNC(send_IPI_all) \
+ APICFUNC(enable_apic_mode) \
+ APICFUNC(phys_pkg_id) \
+}
extern struct genapic *genapic;
+enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
+#define get_uv_system_type() UV_NONE
+#define is_uv_system() 0
+
+
#endif
diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h
index d7e516c..1de931b 100644
--- a/include/asm-x86/genapic_64.h
+++ b/include/asm-x86/genapic_64.h
@@ -33,5 +33,15 @@
extern struct genapic apic_flat;
extern struct genapic apic_physflat;
+extern int acpi_madt_oem_check(char *, char *);
+
+enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
+extern enum uv_system_type get_uv_system_type(void);
+extern int is_uv_system(void);
+
+extern struct genapic apic_x2apic_uv_x;
+DECLARE_PER_CPU(int, x2apic_extra_bits);
+extern void uv_cpu_init(void);
+extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
#endif
diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h
index 9e72800..9870cc1 100644
--- a/include/asm-x86/geode.h
+++ b/include/asm-x86/geode.h
@@ -167,7 +167,7 @@
/* MFGPTs */
#define MFGPT_MAX_TIMERS 8
-#define MFGPT_TIMER_ANY -1
+#define MFGPT_TIMER_ANY (-1)
#define MFGPT_DOMAIN_WORKING 1
#define MFGPT_DOMAIN_STANDBY 2
diff --git a/include/asm-x86/highmem.h b/include/asm-x86/highmem.h
index 479767c..e153f3b 100644
--- a/include/asm-x86/highmem.h
+++ b/include/asm-x86/highmem.h
@@ -8,7 +8,7 @@
* Gerhard.Wichert@pdb.siemens.de
*
*
- * Redesigned the x86 32-bit VM architecture to deal with
+ * Redesigned the x86 32-bit VM architecture to deal with
* up to 16 Terabyte physical memory. With current x86 CPUs
* we now support up to 64 Gigabytes physical RAM.
*
diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h
index 312a58d..0062ef3 100644
--- a/include/asm-x86/hw_irq_64.h
+++ b/include/asm-x86/hw_irq_64.h
@@ -36,7 +36,7 @@
* cleanup after irq migration.
*/
#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR
-
+
/*
* Vectors 0x30-0x3f are used for ISA interrupts.
*/
@@ -159,13 +159,12 @@
* SMP has a few special interrupts for IPI messages
*/
-#define BUILD_IRQ(nr) \
-asmlinkage void IRQ_NAME(nr); \
-__asm__( \
-"\n.p2align\n" \
-"IRQ" #nr "_interrupt:\n\t" \
- "push $~(" #nr ") ; " \
- "jmp common_interrupt");
+#define BUILD_IRQ(nr) \
+ asmlinkage void IRQ_NAME(nr); \
+ asm("\n.p2align\n" \
+ "IRQ" #nr "_interrupt:\n\t" \
+ "push $~(" #nr ") ; " \
+ "jmp common_interrupt");
#define platform_legacy_irq(irq) ((irq) < 16)
diff --git a/include/asm-x86/hypertransport.h b/include/asm-x86/hypertransport.h
index c16c6ff..d2bbd23 100644
--- a/include/asm-x86/hypertransport.h
+++ b/include/asm-x86/hypertransport.h
@@ -8,12 +8,14 @@
#define HT_IRQ_LOW_BASE 0xf8000000
#define HT_IRQ_LOW_VECTOR_SHIFT 16
-#define HT_IRQ_LOW_VECTOR_MASK 0x00ff0000
-#define HT_IRQ_LOW_VECTOR(v) (((v) << HT_IRQ_LOW_VECTOR_SHIFT) & HT_IRQ_LOW_VECTOR_MASK)
+#define HT_IRQ_LOW_VECTOR_MASK 0x00ff0000
+#define HT_IRQ_LOW_VECTOR(v) \
+ (((v) << HT_IRQ_LOW_VECTOR_SHIFT) & HT_IRQ_LOW_VECTOR_MASK)
#define HT_IRQ_LOW_DEST_ID_SHIFT 8
-#define HT_IRQ_LOW_DEST_ID_MASK 0x0000ff00
-#define HT_IRQ_LOW_DEST_ID(v) (((v) << HT_IRQ_LOW_DEST_ID_SHIFT) & HT_IRQ_LOW_DEST_ID_MASK)
+#define HT_IRQ_LOW_DEST_ID_MASK 0x0000ff00
+#define HT_IRQ_LOW_DEST_ID(v) \
+ (((v) << HT_IRQ_LOW_DEST_ID_SHIFT) & HT_IRQ_LOW_DEST_ID_MASK)
#define HT_IRQ_LOW_DM_PHYSICAL 0x0000000
#define HT_IRQ_LOW_DM_LOGICAL 0x0000040
@@ -36,7 +38,8 @@
#define HT_IRQ_HIGH_DEST_ID_SHIFT 0
-#define HT_IRQ_HIGH_DEST_ID_MASK 0x00ffffff
-#define HT_IRQ_HIGH_DEST_ID(v) ((((v) >> 8) << HT_IRQ_HIGH_DEST_ID_SHIFT) & HT_IRQ_HIGH_DEST_ID_MASK)
+#define HT_IRQ_HIGH_DEST_ID_MASK 0x00ffffff
+#define HT_IRQ_HIGH_DEST_ID(v) \
+ ((((v) >> 8) << HT_IRQ_HIGH_DEST_ID_SHIFT) & HT_IRQ_HIGH_DEST_ID_MASK)
#endif /* ASM_HYPERTRANSPORT_H */
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index f377b76..54522b8 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -41,7 +41,7 @@
{
asm volatile("1: fwait\n"
"2:\n"
- _ASM_EXTABLE(1b,2b));
+ _ASM_EXTABLE(1b, 2b));
}
static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
@@ -54,7 +54,7 @@
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
- _ASM_EXTABLE(1b,3b)
+ _ASM_EXTABLE(1b, 3b)
: [err] "=r" (err)
#if 0 /* See comment in __save_init_fpu() below. */
: [fx] "r" (fx), "m" (*fx), "0" (0));
@@ -76,11 +76,11 @@
static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
{
if (unlikely(fx->swd & X87_FSW_ES))
- asm volatile("fnclex");
+ asm volatile("fnclex");
alternative_input(ASM_NOP8 ASM_NOP2,
- " emms\n" /* clear stack tags */
- " fildl %%gs:0", /* load to clear state */
- X86_FEATURE_FXSAVE_LEAK);
+ " emms\n" /* clear stack tags */
+ " fildl %%gs:0", /* load to clear state */
+ X86_FEATURE_FXSAVE_LEAK);
}
static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
@@ -93,14 +93,15 @@
"3: movl $-1,%[err]\n"
" jmp 2b\n"
".previous\n"
- _ASM_EXTABLE(1b,3b)
+ _ASM_EXTABLE(1b, 3b)
: [err] "=r" (err), "=m" (*fx)
#if 0 /* See comment in __fxsave_clear() below. */
: [fx] "r" (fx), "0" (0));
#else
: [fx] "cdaSDb" (fx), "0" (0));
#endif
- if (unlikely(err) && __clear_user(fx, sizeof(struct i387_fxsave_struct)))
+ if (unlikely(err) &&
+ __clear_user(fx, sizeof(struct i387_fxsave_struct)))
err = -EFAULT;
/* No need to clear here because the caller clears USED_MATH */
return err;
@@ -156,8 +157,10 @@
return 0;
clear_used_math(); /* trigger finit */
if (task_thread_info(tsk)->status & TS_USEDFPU) {
- err = save_i387_checking((struct i387_fxsave_struct __user *)buf);
- if (err) return err;
+ err = save_i387_checking((struct i387_fxsave_struct __user *)
+ buf);
+ if (err)
+ return err;
task_thread_info(tsk)->status &= ~TS_USEDFPU;
stts();
} else {
diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h
index 67c319e..45d4df3 100644
--- a/include/asm-x86/i8259.h
+++ b/include/asm-x86/i8259.h
@@ -1,9 +1,11 @@
#ifndef __ASM_I8259_H__
#define __ASM_I8259_H__
+#include <linux/delay.h>
+
extern unsigned int cached_irq_mask;
-#define __byte(x,y) (((unsigned char *) &(y))[x])
+#define __byte(x, y) (((unsigned char *)&(y))[x])
#define cached_master_mask (__byte(0, cached_irq_mask))
#define cached_slave_mask (__byte(1, cached_irq_mask))
@@ -29,7 +31,28 @@
extern void disable_8259A_irq(unsigned int irq);
extern unsigned int startup_8259A_irq(unsigned int irq);
-#define inb_pic inb_p
-#define outb_pic outb_p
+/* the PIC may need a careful delay on some platforms, hence specific calls */
+static inline unsigned char inb_pic(unsigned int port)
+{
+ unsigned char value = inb(port);
+
+ /*
+ * delay for some accesses to PIC on motherboard or in chipset
+ * must be at least one microsecond, so be safe here:
+ */
+ udelay(2);
+
+ return value;
+}
+
+static inline void outb_pic(unsigned char value, unsigned int port)
+{
+ outb(value, port);
+ /*
+ * delay for some accesses to PIC on motherboard or in chipset
+ * must be at least one microsecond, so be safe here:
+ */
+ udelay(2);
+}
#endif /* __ASM_I8259_H__ */
diff --git a/include/asm-x86/ia32.h b/include/asm-x86/ia32.h
index aa97332..55d3abe 100644
--- a/include/asm-x86/ia32.h
+++ b/include/asm-x86/ia32.h
@@ -14,19 +14,19 @@
/* signal.h */
struct sigaction32 {
- unsigned int sa_handler; /* Really a pointer, but need to deal
- with 32 bits */
- unsigned int sa_flags;
- unsigned int sa_restorer; /* Another 32 bit pointer */
- compat_sigset_t sa_mask; /* A 32 bit mask */
+ unsigned int sa_handler; /* Really a pointer, but need to deal
+ with 32 bits */
+ unsigned int sa_flags;
+ unsigned int sa_restorer; /* Another 32 bit pointer */
+ compat_sigset_t sa_mask; /* A 32 bit mask */
};
struct old_sigaction32 {
- unsigned int sa_handler; /* Really a pointer, but need to deal
- with 32 bits */
- compat_old_sigset_t sa_mask; /* A 32 bit mask */
- unsigned int sa_flags;
- unsigned int sa_restorer; /* Another 32 bit pointer */
+ unsigned int sa_handler; /* Really a pointer, but need to deal
+ with 32 bits */
+ compat_old_sigset_t sa_mask; /* A 32 bit mask */
+ unsigned int sa_flags;
+ unsigned int sa_restorer; /* Another 32 bit pointer */
};
typedef struct sigaltstack_ia32 {
@@ -65,7 +65,7 @@
long long st_size;
unsigned int st_blksize;
- long long st_blocks;/* Number 512-byte blocks allocated. */
+ long long st_blocks;/* Number 512-byte blocks allocated */
unsigned st_atime;
unsigned st_atime_nsec;
@@ -77,13 +77,13 @@
unsigned long long st_ino;
} __attribute__((packed));
-typedef struct compat_siginfo{
+typedef struct compat_siginfo {
int si_signo;
int si_errno;
int si_code;
union {
- int _pad[((128/sizeof(int)) - 3)];
+ int _pad[((128 / sizeof(int)) - 3)];
/* kill() */
struct {
@@ -129,28 +129,26 @@
} _sifields;
} compat_siginfo_t;
-struct sigframe32
-{
- u32 pretcode;
- int sig;
- struct sigcontext_ia32 sc;
- struct _fpstate_ia32 fpstate;
- unsigned int extramask[_COMPAT_NSIG_WORDS-1];
+struct sigframe32 {
+ u32 pretcode;
+ int sig;
+ struct sigcontext_ia32 sc;
+ struct _fpstate_ia32 fpstate;
+ unsigned int extramask[_COMPAT_NSIG_WORDS-1];
};
-struct rt_sigframe32
-{
- u32 pretcode;
- int sig;
- u32 pinfo;
- u32 puc;
- compat_siginfo_t info;
- struct ucontext_ia32 uc;
- struct _fpstate_ia32 fpstate;
+struct rt_sigframe32 {
+ u32 pretcode;
+ int sig;
+ u32 pinfo;
+ u32 puc;
+ compat_siginfo_t info;
+ struct ucontext_ia32 uc;
+ struct _fpstate_ia32 fpstate;
};
struct ustat32 {
- __u32 f_tfree;
+ __u32 f_tfree;
compat_ino_t f_tinode;
char f_fname[6];
char f_fpack[6];
@@ -168,5 +166,5 @@
#endif
#endif /* !CONFIG_IA32_SUPPORT */
-
-#endif
+
+#endif
diff --git a/include/asm-x86/ide.h b/include/asm-x86/ide.h
index c2552d8..cf9c98e 100644
--- a/include/asm-x86/ide.h
+++ b/include/asm-x86/ide.h
@@ -20,8 +20,6 @@
# endif
#endif
-#define IDE_ARCH_OBSOLETE_DEFAULTS
-
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
@@ -60,14 +58,6 @@
}
}
-#define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */
-
-#ifdef CONFIG_BLK_DEV_IDEPCI
-#define ide_init_default_irq(base) (0)
-#else
-#define ide_init_default_irq(base) ide_default_irq(base)
-#endif
-
#include <asm-generic/ide_iops.h>
#endif /* __KERNEL__ */
diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h
index 5a58b17..7b292d3 100644
--- a/include/asm-x86/io.h
+++ b/include/asm-x86/io.h
@@ -1,5 +1,11 @@
+#define ARCH_HAS_IOREMAP_WC
+
#ifdef CONFIG_X86_32
# include "io_32.h"
#else
# include "io_64.h"
#endif
+extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
+ unsigned long prot_val);
+extern void __iomem *ioremap_wc(unsigned long offset, unsigned long size);
+
diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h
index d4d8fbd..509045f 100644
--- a/include/asm-x86/io_32.h
+++ b/include/asm-x86/io_32.h
@@ -65,14 +65,14 @@
*
* The returned physical address is the physical (CPU) mapping for
* the memory address given. It is only valid to use this function on
- * addresses directly mapped or allocated via kmalloc.
+ * addresses directly mapped or allocated via kmalloc.
*
* This function does not give bus mappings for DMA transfers. In
* almost all conceivable cases a device driver should not be using
* this function
*/
-
-static inline unsigned long virt_to_phys(volatile void * address)
+
+static inline unsigned long virt_to_phys(volatile void *address)
{
return __pa(address);
}
@@ -90,7 +90,7 @@
* this function
*/
-static inline void * phys_to_virt(unsigned long address)
+static inline void *phys_to_virt(unsigned long address)
{
return __va(address);
}
@@ -169,16 +169,19 @@
static inline unsigned char readb(const volatile void __iomem *addr)
{
- return *(volatile unsigned char __force *) addr;
+ return *(volatile unsigned char __force *)addr;
}
+
static inline unsigned short readw(const volatile void __iomem *addr)
{
- return *(volatile unsigned short __force *) addr;
+ return *(volatile unsigned short __force *)addr;
}
+
static inline unsigned int readl(const volatile void __iomem *addr)
{
return *(volatile unsigned int __force *) addr;
}
+
#define readb_relaxed(addr) readb(addr)
#define readw_relaxed(addr) readw(addr)
#define readl_relaxed(addr) readl(addr)
@@ -188,15 +191,17 @@
static inline void writeb(unsigned char b, volatile void __iomem *addr)
{
- *(volatile unsigned char __force *) addr = b;
+ *(volatile unsigned char __force *)addr = b;
}
+
static inline void writew(unsigned short b, volatile void __iomem *addr)
{
- *(volatile unsigned short __force *) addr = b;
+ *(volatile unsigned short __force *)addr = b;
}
+
static inline void writel(unsigned int b, volatile void __iomem *addr)
{
- *(volatile unsigned int __force *) addr = b;
+ *(volatile unsigned int __force *)addr = b;
}
#define __raw_writeb writeb
#define __raw_writew writew
@@ -239,12 +244,12 @@
* 1. Out of order aware processors
* 2. Accidentally out of order processors (PPro errata #51)
*/
-
+
#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
static inline void flush_write_buffers(void)
{
- __asm__ __volatile__ ("lock; addl $0,0(%%esp)": : :"memory");
+ asm volatile("lock; addl $0,0(%%esp)": : :"memory");
}
#else
@@ -264,7 +269,8 @@
#include <asm/paravirt.h>
#else
-static inline void slow_down_io(void) {
+static inline void slow_down_io(void)
+{
native_io_delay();
#ifdef REALLY_SLOW_IO
native_io_delay();
@@ -275,51 +281,74 @@
#endif
-#define __BUILDIO(bwl,bw,type) \
-static inline void out##bwl(unsigned type value, int port) { \
- out##bwl##_local(value, port); \
-} \
-static inline unsigned type in##bwl(int port) { \
- return in##bwl##_local(port); \
+#define __BUILDIO(bwl, bw, type) \
+static inline void out##bwl(unsigned type value, int port) \
+{ \
+ out##bwl##_local(value, port); \
+} \
+ \
+static inline unsigned type in##bwl(int port) \
+{ \
+ return in##bwl##_local(port); \
}
-#define BUILDIO(bwl,bw,type) \
-static inline void out##bwl##_local(unsigned type value, int port) { \
- __asm__ __volatile__("out" #bwl " %" #bw "0, %w1" : : "a"(value), "Nd"(port)); \
-} \
-static inline unsigned type in##bwl##_local(int port) { \
- unsigned type value; \
- __asm__ __volatile__("in" #bwl " %w1, %" #bw "0" : "=a"(value) : "Nd"(port)); \
- return value; \
-} \
-static inline void out##bwl##_local_p(unsigned type value, int port) { \
- out##bwl##_local(value, port); \
- slow_down_io(); \
-} \
-static inline unsigned type in##bwl##_local_p(int port) { \
- unsigned type value = in##bwl##_local(port); \
- slow_down_io(); \
- return value; \
-} \
-__BUILDIO(bwl,bw,type) \
-static inline void out##bwl##_p(unsigned type value, int port) { \
- out##bwl(value, port); \
- slow_down_io(); \
-} \
-static inline unsigned type in##bwl##_p(int port) { \
- unsigned type value = in##bwl(port); \
- slow_down_io(); \
- return value; \
-} \
-static inline void outs##bwl(int port, const void *addr, unsigned long count) { \
- __asm__ __volatile__("rep; outs" #bwl : "+S"(addr), "+c"(count) : "d"(port)); \
-} \
-static inline void ins##bwl(int port, void *addr, unsigned long count) { \
- __asm__ __volatile__("rep; ins" #bwl : "+D"(addr), "+c"(count) : "d"(port)); \
+#define BUILDIO(bwl, bw, type) \
+static inline void out##bwl##_local(unsigned type value, int port) \
+{ \
+ asm volatile("out" #bwl " %" #bw "0, %w1" \
+ : : "a"(value), "Nd"(port)); \
+} \
+ \
+static inline unsigned type in##bwl##_local(int port) \
+{ \
+ unsigned type value; \
+ asm volatile("in" #bwl " %w1, %" #bw "0" \
+ : "=a"(value) : "Nd"(port)); \
+ return value; \
+} \
+ \
+static inline void out##bwl##_local_p(unsigned type value, int port) \
+{ \
+ out##bwl##_local(value, port); \
+ slow_down_io(); \
+} \
+ \
+static inline unsigned type in##bwl##_local_p(int port) \
+{ \
+ unsigned type value = in##bwl##_local(port); \
+ slow_down_io(); \
+ return value; \
+} \
+ \
+__BUILDIO(bwl, bw, type) \
+ \
+static inline void out##bwl##_p(unsigned type value, int port) \
+{ \
+ out##bwl(value, port); \
+ slow_down_io(); \
+} \
+ \
+static inline unsigned type in##bwl##_p(int port) \
+{ \
+ unsigned type value = in##bwl(port); \
+ slow_down_io(); \
+ return value; \
+} \
+ \
+static inline void outs##bwl(int port, const void *addr, unsigned long count) \
+{ \
+ asm volatile("rep; outs" #bwl \
+ : "+S"(addr), "+c"(count) : "d"(port)); \
+} \
+ \
+static inline void ins##bwl(int port, void *addr, unsigned long count) \
+{ \
+ asm volatile("rep; ins" #bwl \
+ : "+D"(addr), "+c"(count) : "d"(port)); \
}
-BUILDIO(b,b,char)
-BUILDIO(w,w,short)
-BUILDIO(l,,int)
+BUILDIO(b, b, char)
+BUILDIO(w, w, short)
+BUILDIO(l, , int)
#endif
diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h
index db0be20..c2f5eef 100644
--- a/include/asm-x86/io_64.h
+++ b/include/asm-x86/io_64.h
@@ -58,60 +58,75 @@
/*
* Talk about misusing macros..
*/
-#define __OUT1(s,x) \
+#define __OUT1(s, x) \
static inline void out##s(unsigned x value, unsigned short port) {
-#define __OUT2(s,s1,s2) \
-__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
+#define __OUT2(s, s1, s2) \
+asm volatile ("out" #s " %" s1 "0,%" s2 "1"
#ifndef REALLY_SLOW_IO
#define REALLY_SLOW_IO
#define UNSET_REALLY_SLOW_IO
#endif
-#define __OUT(s,s1,x) \
-__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \
-__OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \
- slow_down_io(); }
+#define __OUT(s, s1, x) \
+ __OUT1(s, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \
+ } \
+ __OUT1(s##_p, x) __OUT2(s, s1, "w") : : "a" (value), "Nd" (port)); \
+ slow_down_io(); \
+}
-#define __IN1(s) \
-static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
+#define __IN1(s) \
+static inline RETURN_TYPE in##s(unsigned short port) \
+{ \
+ RETURN_TYPE _v;
-#define __IN2(s,s1,s2) \
-__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
+#define __IN2(s, s1, s2) \
+ asm volatile ("in" #s " %" s2 "1,%" s1 "0"
-#define __IN(s,s1,i...) \
-__IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); return _v; } \
-__IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \
- slow_down_io(); return _v; }
+#define __IN(s, s1, i...) \
+ __IN1(s) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \
+ return _v; \
+ } \
+ __IN1(s##_p) __IN2(s, s1, "w") : "=a" (_v) : "Nd" (port), ##i); \
+ slow_down_io(); \
+ return _v; }
#ifdef UNSET_REALLY_SLOW_IO
#undef REALLY_SLOW_IO
#endif
-#define __INS(s) \
-static inline void ins##s(unsigned short port, void * addr, unsigned long count) \
-{ __asm__ __volatile__ ("rep ; ins" #s \
-: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
+#define __INS(s) \
+static inline void ins##s(unsigned short port, void *addr, \
+ unsigned long count) \
+{ \
+ asm volatile ("rep ; ins" #s \
+ : "=D" (addr), "=c" (count) \
+ : "d" (port), "0" (addr), "1" (count)); \
+}
-#define __OUTS(s) \
-static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
-{ __asm__ __volatile__ ("rep ; outs" #s \
-: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
+#define __OUTS(s) \
+static inline void outs##s(unsigned short port, const void *addr, \
+ unsigned long count) \
+{ \
+ asm volatile ("rep ; outs" #s \
+ : "=S" (addr), "=c" (count) \
+ : "d" (port), "0" (addr), "1" (count)); \
+}
#define RETURN_TYPE unsigned char
-__IN(b,"")
+__IN(b, "")
#undef RETURN_TYPE
#define RETURN_TYPE unsigned short
-__IN(w,"")
+__IN(w, "")
#undef RETURN_TYPE
#define RETURN_TYPE unsigned int
-__IN(l,"")
+__IN(l, "")
#undef RETURN_TYPE
-__OUT(b,"b",char)
-__OUT(w,"w",short)
-__OUT(l,,int)
+__OUT(b, "b", char)
+__OUT(w, "w", short)
+__OUT(l, , int)
__INS(b)
__INS(w)
@@ -132,12 +147,12 @@
* Change virtual addresses to physical addresses and vv.
* These are pretty trivial
*/
-static inline unsigned long virt_to_phys(volatile void * address)
+static inline unsigned long virt_to_phys(volatile void *address)
{
return __pa(address);
}
-static inline void * phys_to_virt(unsigned long address)
+static inline void *phys_to_virt(unsigned long address)
{
return __va(address);
}
@@ -200,18 +215,22 @@
{
return *(__force volatile __u8 *)addr;
}
+
static inline __u16 __readw(const volatile void __iomem *addr)
{
return *(__force volatile __u16 *)addr;
}
+
static __always_inline __u32 __readl(const volatile void __iomem *addr)
{
return *(__force volatile __u32 *)addr;
}
+
static inline __u64 __readq(const volatile void __iomem *addr)
{
return *(__force volatile __u64 *)addr;
}
+
#define readb(x) __readb(x)
#define readw(x) __readw(x)
#define readl(x) __readl(x)
@@ -231,37 +250,44 @@
{
*(__force volatile __u32 *)addr = b;
}
+
static inline void __writeq(__u64 b, volatile void __iomem *addr)
{
*(__force volatile __u64 *)addr = b;
}
+
static inline void __writeb(__u8 b, volatile void __iomem *addr)
{
*(__force volatile __u8 *)addr = b;
}
+
static inline void __writew(__u16 b, volatile void __iomem *addr)
{
*(__force volatile __u16 *)addr = b;
}
-#define writeq(val,addr) __writeq((val),(addr))
-#define writel(val,addr) __writel((val),(addr))
-#define writew(val,addr) __writew((val),(addr))
-#define writeb(val,addr) __writeb((val),(addr))
+
+#define writeq(val, addr) __writeq((val), (addr))
+#define writel(val, addr) __writel((val), (addr))
+#define writew(val, addr) __writew((val), (addr))
+#define writeb(val, addr) __writeb((val), (addr))
#define __raw_writeb writeb
#define __raw_writew writew
#define __raw_writel writel
#define __raw_writeq writeq
-void __memcpy_fromio(void*,unsigned long,unsigned);
-void __memcpy_toio(unsigned long,const void*,unsigned);
+void __memcpy_fromio(void *, unsigned long, unsigned);
+void __memcpy_toio(unsigned long, const void *, unsigned);
-static inline void memcpy_fromio(void *to, const volatile void __iomem *from, unsigned len)
+static inline void memcpy_fromio(void *to, const volatile void __iomem *from,
+ unsigned len)
{
- __memcpy_fromio(to,(unsigned long)from,len);
+ __memcpy_fromio(to, (unsigned long)from, len);
}
-static inline void memcpy_toio(volatile void __iomem *to, const void *from, unsigned len)
+
+static inline void memcpy_toio(volatile void __iomem *to, const void *from,
+ unsigned len)
{
- __memcpy_toio((unsigned long)to,from,len);
+ __memcpy_toio((unsigned long)to, from, len);
}
void memset_io(volatile void __iomem *a, int b, size_t c);
@@ -276,7 +302,7 @@
*/
#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
-#define flush_write_buffers()
+#define flush_write_buffers()
extern int iommu_bio_merge;
#define BIO_VMERGE_BOUNDARY iommu_bio_merge
diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h
index 0f5b3fe..0c9e17c 100644
--- a/include/asm-x86/io_apic.h
+++ b/include/asm-x86/io_apic.h
@@ -110,6 +110,13 @@
* MP-BIOS irq configuration table structures:
*/
+struct mp_ioapic_routing {
+ int apic_id;
+ int gsi_base;
+ int gsi_end;
+ u32 pin_programmed[4];
+};
+
/* I/O APIC entries */
extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
@@ -146,7 +153,6 @@
extern int io_apic_get_redir_entries(int ioapic);
extern int io_apic_set_pci_routing(int ioapic, int pin, int irq,
int edge_level, int active_high_low);
-extern int timer_uses_ioapic_pin_0;
#endif /* CONFIG_ACPI */
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
diff --git a/include/asm-x86/ioctls.h b/include/asm-x86/ioctls.h
index 93c894d..c0c338b 100644
--- a/include/asm-x86/ioctls.h
+++ b/include/asm-x86/ioctls.h
@@ -47,12 +47,13 @@
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+#define TCGETS2 _IOR('T', 0x2A, struct termios2)
+#define TCSETS2 _IOW('T', 0x2B, struct termios2)
+#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
+#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN _IOR('T', 0x30, unsigned int)
+ /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
#define FIONCLEX 0x5450
#define FIOCLEX 0x5451
diff --git a/include/asm-x86/ipcbuf.h b/include/asm-x86/ipcbuf.h
index 2adf8b3..ee678fd 100644
--- a/include/asm-x86/ipcbuf.h
+++ b/include/asm-x86/ipcbuf.h
@@ -11,8 +11,7 @@
* - 2 miscellaneous 32-bit values
*/
-struct ipc64_perm
-{
+struct ipc64_perm {
__kernel_key_t key;
__kernel_uid32_t uid;
__kernel_gid32_t gid;
diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h
index 6d011bd..ecc80f3 100644
--- a/include/asm-x86/ipi.h
+++ b/include/asm-x86/ipi.h
@@ -27,7 +27,8 @@
* We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
*/
-static inline unsigned int __prepare_ICR (unsigned int shortcut, int vector, unsigned int dest)
+static inline unsigned int __prepare_ICR(unsigned int shortcut, int vector,
+ unsigned int dest)
{
unsigned int icr = shortcut | dest;
@@ -42,12 +43,13 @@
return icr;
}
-static inline int __prepare_ICR2 (unsigned int mask)
+static inline int __prepare_ICR2(unsigned int mask)
{
return SET_APIC_DEST_FIELD(mask);
}
-static inline void __send_IPI_shortcut(unsigned int shortcut, int vector, unsigned int dest)
+static inline void __send_IPI_shortcut(unsigned int shortcut, int vector,
+ unsigned int dest)
{
/*
* Subtle. In the case of the 'never do double writes' workaround
@@ -78,7 +80,8 @@
* This is used to send an IPI with no shorthand notation (the destination is
* specified in bits 56 to 63 of the ICR).
*/
-static inline void __send_IPI_dest_field(unsigned int mask, int vector, unsigned int dest)
+static inline void __send_IPI_dest_field(unsigned int mask, int vector,
+ unsigned int dest)
{
unsigned long cfg;
diff --git a/include/asm-x86/irq_32.h b/include/asm-x86/irq_32.h
index aca9c96..0b79f31 100644
--- a/include/asm-x86/irq_32.h
+++ b/include/asm-x86/irq_32.h
@@ -15,7 +15,7 @@
#include "irq_vectors.h"
#include <asm/thread_info.h>
-static __inline__ int irq_canonicalize(int irq)
+static inline int irq_canonicalize(int irq)
{
return ((irq == 2) ? 9 : irq);
}
diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h
index 5006c6e..083d35a 100644
--- a/include/asm-x86/irq_64.h
+++ b/include/asm-x86/irq_64.h
@@ -31,10 +31,10 @@
#define FIRST_SYSTEM_VECTOR 0xef /* duplicated in hw_irq.h */
-#define NR_IRQS (NR_VECTORS + (32 *NR_CPUS))
+#define NR_IRQS (NR_VECTORS + (32 * NR_CPUS))
#define NR_IRQ_VECTORS NR_IRQS
-static __inline__ int irq_canonicalize(int irq)
+static inline int irq_canonicalize(int irq)
{
return ((irq == 2) ? 9 : irq);
}
diff --git a/include/asm-x86/irqflags.h b/include/asm-x86/irqflags.h
index 92021c1..c242527 100644
--- a/include/asm-x86/irqflags.h
+++ b/include/asm-x86/irqflags.h
@@ -12,25 +12,21 @@
{
unsigned long flags;
- __asm__ __volatile__(
- "# __raw_save_flags\n\t"
- "pushf ; pop %0"
- : "=g" (flags)
- : /* no input */
- : "memory"
- );
+ asm volatile("# __raw_save_flags\n\t"
+ "pushf ; pop %0"
+ : "=g" (flags)
+ : /* no input */
+ : "memory");
return flags;
}
static inline void native_restore_fl(unsigned long flags)
{
- __asm__ __volatile__(
- "push %0 ; popf"
- : /* no output */
- :"g" (flags)
- :"memory", "cc"
- );
+ asm volatile("push %0 ; popf"
+ : /* no output */
+ :"g" (flags)
+ :"memory", "cc");
}
static inline void native_irq_disable(void)
@@ -131,11 +127,11 @@
#endif /* CONFIG_PARAVIRT */
#ifndef __ASSEMBLY__
-#define raw_local_save_flags(flags) \
- do { (flags) = __raw_local_save_flags(); } while (0)
+#define raw_local_save_flags(flags) \
+ do { (flags) = __raw_local_save_flags(); } while (0)
-#define raw_local_irq_save(flags) \
- do { (flags) = __raw_local_irq_save(); } while (0)
+#define raw_local_irq_save(flags) \
+ do { (flags) = __raw_local_irq_save(); } while (0)
static inline int raw_irqs_disabled_flags(unsigned long flags)
{
diff --git a/include/asm-x86/kdebug.h b/include/asm-x86/kdebug.h
index 99dcbaf..96651bb 100644
--- a/include/asm-x86/kdebug.h
+++ b/include/asm-x86/kdebug.h
@@ -20,15 +20,16 @@
DIE_CALL,
DIE_NMI_IPI,
DIE_PAGE_FAULT,
+ DIE_NMIUNKNOWN,
};
extern void printk_address(unsigned long address, int reliable);
-extern void die(const char *,struct pt_regs *,long);
+extern void die(const char *, struct pt_regs *,long);
extern int __must_check __die(const char *, struct pt_regs *, long);
extern void show_registers(struct pt_regs *regs);
extern void __show_registers(struct pt_regs *, int all);
extern void show_trace(struct task_struct *t, struct pt_regs *regs,
- unsigned long *sp, unsigned long bp);
+ unsigned long *sp, unsigned long bp);
extern void __show_regs(struct pt_regs *regs);
extern void show_regs(struct pt_regs *regs);
extern unsigned long oops_begin(void);
diff --git a/include/asm-x86/kexec.h b/include/asm-x86/kexec.h
index c90d3c7..8f855a1 100644
--- a/include/asm-x86/kexec.h
+++ b/include/asm-x86/kexec.h
@@ -94,10 +94,9 @@
{
#ifdef CONFIG_X86_32
newregs->sp = (unsigned long)&(oldregs->sp);
- __asm__ __volatile__(
- "xorl %%eax, %%eax\n\t"
- "movw %%ss, %%ax\n\t"
- :"=a"(newregs->ss));
+ asm volatile("xorl %%eax, %%eax\n\t"
+ "movw %%ss, %%ax\n\t"
+ :"=a"(newregs->ss));
#endif
}
@@ -114,39 +113,39 @@
crash_fixup_ss_esp(newregs, oldregs);
} else {
#ifdef CONFIG_X86_32
- __asm__ __volatile__("movl %%ebx,%0" : "=m"(newregs->bx));
- __asm__ __volatile__("movl %%ecx,%0" : "=m"(newregs->cx));
- __asm__ __volatile__("movl %%edx,%0" : "=m"(newregs->dx));
- __asm__ __volatile__("movl %%esi,%0" : "=m"(newregs->si));
- __asm__ __volatile__("movl %%edi,%0" : "=m"(newregs->di));
- __asm__ __volatile__("movl %%ebp,%0" : "=m"(newregs->bp));
- __asm__ __volatile__("movl %%eax,%0" : "=m"(newregs->ax));
- __asm__ __volatile__("movl %%esp,%0" : "=m"(newregs->sp));
- __asm__ __volatile__("movl %%ss, %%eax;" :"=a"(newregs->ss));
- __asm__ __volatile__("movl %%cs, %%eax;" :"=a"(newregs->cs));
- __asm__ __volatile__("movl %%ds, %%eax;" :"=a"(newregs->ds));
- __asm__ __volatile__("movl %%es, %%eax;" :"=a"(newregs->es));
- __asm__ __volatile__("pushfl; popl %0" :"=m"(newregs->flags));
+ asm volatile("movl %%ebx,%0" : "=m"(newregs->bx));
+ asm volatile("movl %%ecx,%0" : "=m"(newregs->cx));
+ asm volatile("movl %%edx,%0" : "=m"(newregs->dx));
+ asm volatile("movl %%esi,%0" : "=m"(newregs->si));
+ asm volatile("movl %%edi,%0" : "=m"(newregs->di));
+ asm volatile("movl %%ebp,%0" : "=m"(newregs->bp));
+ asm volatile("movl %%eax,%0" : "=m"(newregs->ax));
+ asm volatile("movl %%esp,%0" : "=m"(newregs->sp));
+ asm volatile("movl %%ss, %%eax;" :"=a"(newregs->ss));
+ asm volatile("movl %%cs, %%eax;" :"=a"(newregs->cs));
+ asm volatile("movl %%ds, %%eax;" :"=a"(newregs->ds));
+ asm volatile("movl %%es, %%eax;" :"=a"(newregs->es));
+ asm volatile("pushfl; popl %0" :"=m"(newregs->flags));
#else
- __asm__ __volatile__("movq %%rbx,%0" : "=m"(newregs->bx));
- __asm__ __volatile__("movq %%rcx,%0" : "=m"(newregs->cx));
- __asm__ __volatile__("movq %%rdx,%0" : "=m"(newregs->dx));
- __asm__ __volatile__("movq %%rsi,%0" : "=m"(newregs->si));
- __asm__ __volatile__("movq %%rdi,%0" : "=m"(newregs->di));
- __asm__ __volatile__("movq %%rbp,%0" : "=m"(newregs->bp));
- __asm__ __volatile__("movq %%rax,%0" : "=m"(newregs->ax));
- __asm__ __volatile__("movq %%rsp,%0" : "=m"(newregs->sp));
- __asm__ __volatile__("movq %%r8,%0" : "=m"(newregs->r8));
- __asm__ __volatile__("movq %%r9,%0" : "=m"(newregs->r9));
- __asm__ __volatile__("movq %%r10,%0" : "=m"(newregs->r10));
- __asm__ __volatile__("movq %%r11,%0" : "=m"(newregs->r11));
- __asm__ __volatile__("movq %%r12,%0" : "=m"(newregs->r12));
- __asm__ __volatile__("movq %%r13,%0" : "=m"(newregs->r13));
- __asm__ __volatile__("movq %%r14,%0" : "=m"(newregs->r14));
- __asm__ __volatile__("movq %%r15,%0" : "=m"(newregs->r15));
- __asm__ __volatile__("movl %%ss, %%eax;" :"=a"(newregs->ss));
- __asm__ __volatile__("movl %%cs, %%eax;" :"=a"(newregs->cs));
- __asm__ __volatile__("pushfq; popq %0" :"=m"(newregs->flags));
+ asm volatile("movq %%rbx,%0" : "=m"(newregs->bx));
+ asm volatile("movq %%rcx,%0" : "=m"(newregs->cx));
+ asm volatile("movq %%rdx,%0" : "=m"(newregs->dx));
+ asm volatile("movq %%rsi,%0" : "=m"(newregs->si));
+ asm volatile("movq %%rdi,%0" : "=m"(newregs->di));
+ asm volatile("movq %%rbp,%0" : "=m"(newregs->bp));
+ asm volatile("movq %%rax,%0" : "=m"(newregs->ax));
+ asm volatile("movq %%rsp,%0" : "=m"(newregs->sp));
+ asm volatile("movq %%r8,%0" : "=m"(newregs->r8));
+ asm volatile("movq %%r9,%0" : "=m"(newregs->r9));
+ asm volatile("movq %%r10,%0" : "=m"(newregs->r10));
+ asm volatile("movq %%r11,%0" : "=m"(newregs->r11));
+ asm volatile("movq %%r12,%0" : "=m"(newregs->r12));
+ asm volatile("movq %%r13,%0" : "=m"(newregs->r13));
+ asm volatile("movq %%r14,%0" : "=m"(newregs->r14));
+ asm volatile("movq %%r15,%0" : "=m"(newregs->r15));
+ asm volatile("movl %%ss, %%eax;" :"=a"(newregs->ss));
+ asm volatile("movl %%cs, %%eax;" :"=a"(newregs->cs));
+ asm volatile("pushfq; popq %0" :"=m"(newregs->flags));
#endif
newregs->ip = (unsigned long)current_text_addr();
}
diff --git a/include/asm-x86/kgdb.h b/include/asm-x86/kgdb.h
new file mode 100644
index 0000000..484c475
--- /dev/null
+++ b/include/asm-x86/kgdb.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_KGDB_H_
+#define _ASM_KGDB_H_
+
+/*
+ * Copyright (C) 2001-2004 Amit S. Kale
+ * Copyright (C) 2008 Wind River Systems, Inc.
+ */
+
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound
+ * buffers at least NUMREGBYTES*2 are needed for register packets
+ * Longer buffer is needed to list all threads
+ */
+#define BUFMAX 1024
+
+/*
+ * Note that this register image is in a different order than
+ * the register image that Linux produces at interrupt time.
+ *
+ * Linux's register image is defined by struct pt_regs in ptrace.h.
+ * Just why GDB uses a different order is a historical mystery.
+ */
+#ifdef CONFIG_X86_32
+enum regnames {
+ GDB_AX, /* 0 */
+ GDB_CX, /* 1 */
+ GDB_DX, /* 2 */
+ GDB_BX, /* 3 */
+ GDB_SP, /* 4 */
+ GDB_BP, /* 5 */
+ GDB_SI, /* 6 */
+ GDB_DI, /* 7 */
+ GDB_PC, /* 8 also known as eip */
+ GDB_PS, /* 9 also known as eflags */
+ GDB_CS, /* 10 */
+ GDB_SS, /* 11 */
+ GDB_DS, /* 12 */
+ GDB_ES, /* 13 */
+ GDB_FS, /* 14 */
+ GDB_GS, /* 15 */
+};
+#else /* ! CONFIG_X86_32 */
+enum regnames {
+ GDB_AX, /* 0 */
+ GDB_DX, /* 1 */
+ GDB_CX, /* 2 */
+ GDB_BX, /* 3 */
+ GDB_SI, /* 4 */
+ GDB_DI, /* 5 */
+ GDB_BP, /* 6 */
+ GDB_SP, /* 7 */
+ GDB_R8, /* 8 */
+ GDB_R9, /* 9 */
+ GDB_R10, /* 10 */
+ GDB_R11, /* 11 */
+ GDB_R12, /* 12 */
+ GDB_R13, /* 13 */
+ GDB_R14, /* 14 */
+ GDB_R15, /* 15 */
+ GDB_PC, /* 16 */
+ GDB_PS, /* 17 */
+};
+#endif /* CONFIG_X86_32 */
+
+/*
+ * Number of bytes of registers:
+ */
+#ifdef CONFIG_X86_32
+# define NUMREGBYTES 64
+#else
+# define NUMREGBYTES ((GDB_PS+1)*8)
+#endif
+
+static inline void arch_kgdb_breakpoint(void)
+{
+ asm(" int $3");
+}
+#define BREAK_INSTR_SIZE 1
+#define CACHE_FLUSH_IS_SAFE 1
+
+#endif /* _ASM_KGDB_H_ */
diff --git a/include/asm-x86/kprobes.h b/include/asm-x86/kprobes.h
index 61ad7b5..54980b0 100644
--- a/include/asm-x86/kprobes.h
+++ b/include/asm-x86/kprobes.h
@@ -35,12 +35,12 @@
#define RELATIVEJUMP_INSTRUCTION 0xe9
#define MAX_INSN_SIZE 16
#define MAX_STACK_SIZE 64
-#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
- (((unsigned long)current_thread_info()) + THREAD_SIZE \
- - (unsigned long)(ADDR))) \
- ? (MAX_STACK_SIZE) \
- : (((unsigned long)current_thread_info()) + THREAD_SIZE \
- - (unsigned long)(ADDR)))
+#define MIN_STACK_SIZE(ADDR) \
+ (((MAX_STACK_SIZE) < (((unsigned long)current_thread_info()) + \
+ THREAD_SIZE - (unsigned long)(ADDR))) \
+ ? (MAX_STACK_SIZE) \
+ : (((unsigned long)current_thread_info()) + \
+ THREAD_SIZE - (unsigned long)(ADDR)))
#define flush_insn_slot(p) do { } while (0)
diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index 4702b04..68ee390 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -22,15 +22,16 @@
#define CR3_PAE_RESERVED_BITS ((X86_CR3_PWT | X86_CR3_PCD) - 1)
#define CR3_NONPAE_RESERVED_BITS ((PAGE_SIZE-1) & ~(X86_CR3_PWT | X86_CR3_PCD))
-#define CR3_L_MODE_RESERVED_BITS (CR3_NONPAE_RESERVED_BITS|0xFFFFFF0000000000ULL)
+#define CR3_L_MODE_RESERVED_BITS (CR3_NONPAE_RESERVED_BITS | \
+ 0xFFFFFF0000000000ULL)
-#define KVM_GUEST_CR0_MASK \
+#define KVM_GUEST_CR0_MASK \
(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE \
| X86_CR0_NW | X86_CR0_CD)
-#define KVM_VM_CR0_ALWAYS_ON \
+#define KVM_VM_CR0_ALWAYS_ON \
(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE | X86_CR0_TS \
| X86_CR0_MP)
-#define KVM_GUEST_CR4_MASK \
+#define KVM_GUEST_CR4_MASK \
(X86_CR4_VME | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_PGE | X86_CR4_VMXE)
#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
#define KVM_RMODE_VM_CR4_ALWAYS_ON (X86_CR4_VME | X86_CR4_PAE | X86_CR4_VMXE)
@@ -133,12 +134,12 @@
union kvm_mmu_page_role {
unsigned word;
struct {
- unsigned glevels : 4;
- unsigned level : 4;
- unsigned quadrant : 2;
- unsigned pad_for_nice_hex_output : 6;
- unsigned metaphysical : 1;
- unsigned access : 3;
+ unsigned glevels:4;
+ unsigned level:4;
+ unsigned quadrant:2;
+ unsigned pad_for_nice_hex_output:6;
+ unsigned metaphysical:1;
+ unsigned access:3;
};
};
@@ -606,6 +607,7 @@
#define TSS_BASE_SIZE 0x68
#define TSS_IOPB_SIZE (65536 / 8)
#define TSS_REDIRECTION_SIZE (256 / 8)
-#define RMODE_TSS_SIZE (TSS_BASE_SIZE + TSS_REDIRECTION_SIZE + TSS_IOPB_SIZE + 1)
+#define RMODE_TSS_SIZE \
+ (TSS_BASE_SIZE + TSS_REDIRECTION_SIZE + TSS_IOPB_SIZE + 1)
#endif
diff --git a/include/asm-x86/kvm_x86_emulate.h b/include/asm-x86/kvm_x86_emulate.h
index 7db91b9..d6337f9 100644
--- a/include/asm-x86/kvm_x86_emulate.h
+++ b/include/asm-x86/kvm_x86_emulate.h
@@ -68,10 +68,10 @@
* @val: [OUT] Value read from memory, zero-extended to 'u_long'.
* @bytes: [IN ] Number of bytes to read from memory.
*/
- int (*read_emulated) (unsigned long addr,
- void *val,
- unsigned int bytes,
- struct kvm_vcpu *vcpu);
+ int (*read_emulated)(unsigned long addr,
+ void *val,
+ unsigned int bytes,
+ struct kvm_vcpu *vcpu);
/*
* write_emulated: Read bytes from emulated/special memory area.
@@ -80,10 +80,10 @@
* required).
* @bytes: [IN ] Number of bytes to write to memory.
*/
- int (*write_emulated) (unsigned long addr,
- const void *val,
- unsigned int bytes,
- struct kvm_vcpu *vcpu);
+ int (*write_emulated)(unsigned long addr,
+ const void *val,
+ unsigned int bytes,
+ struct kvm_vcpu *vcpu);
/*
* cmpxchg_emulated: Emulate an atomic (LOCKed) CMPXCHG operation on an
@@ -93,11 +93,11 @@
* @new: [IN ] Value to write to @addr.
* @bytes: [IN ] Number of bytes to access using CMPXCHG.
*/
- int (*cmpxchg_emulated) (unsigned long addr,
- const void *old,
- const void *new,
- unsigned int bytes,
- struct kvm_vcpu *vcpu);
+ int (*cmpxchg_emulated)(unsigned long addr,
+ const void *old,
+ const void *new,
+ unsigned int bytes,
+ struct kvm_vcpu *vcpu);
};
@@ -143,7 +143,7 @@
/* Register state before/after emulation. */
struct kvm_vcpu *vcpu;
- /* Linear faulting address (if emulating a page-faulting instruction). */
+ /* Linear faulting address (if emulating a page-faulting instruction) */
unsigned long eflags;
/* Emulated execution mode, represented by an X86EMUL_MODE value. */
diff --git a/include/asm-x86/lguest.h b/include/asm-x86/lguest.h
index 9b17571..be4a724 100644
--- a/include/asm-x86/lguest.h
+++ b/include/asm-x86/lguest.h
@@ -34,8 +34,7 @@
extern void lguest_iret(void);
extern void lguest_init(void);
-struct lguest_regs
-{
+struct lguest_regs {
/* Manually saved part. */
unsigned long eax, ebx, ecx, edx;
unsigned long esi, edi, ebp;
@@ -51,8 +50,7 @@
};
/* This is a guest-specific page (mapped ro) into the guest. */
-struct lguest_ro_state
-{
+struct lguest_ro_state {
/* Host information we need to restore when we switch back. */
u32 host_cr3;
struct desc_ptr host_idt_desc;
@@ -67,8 +65,7 @@
struct desc_struct guest_gdt[GDT_ENTRIES];
};
-struct lg_cpu_arch
-{
+struct lg_cpu_arch {
/* The GDT entries copied into lguest_ro_state when running. */
struct desc_struct gdt[GDT_ENTRIES];
@@ -85,7 +82,7 @@
cr0 = read_cr0();
if (!(cr0 & 8))
- write_cr0(cr0|8);
+ write_cr0(cr0 | 8);
}
/* Full 4G segment descriptors, suitable for CS and DS. */
diff --git a/include/asm-x86/lguest_hcall.h b/include/asm-x86/lguest_hcall.h
index f239e70..a3241f2 100644
--- a/include/asm-x86/lguest_hcall.h
+++ b/include/asm-x86/lguest_hcall.h
@@ -46,7 +46,7 @@
{
/* "int" is the Intel instruction to trigger a trap. */
asm volatile("int $" __stringify(LGUEST_TRAP_ENTRY)
- /* The call in %eax (aka "a") might be overwritten */
+ /* The call in %eax (aka "a") might be overwritten */
: "=a"(call)
/* The arguments are in %eax, %edx, %ebx & %ecx */
: "a"(call), "d"(arg1), "b"(arg2), "c"(arg3)
@@ -62,8 +62,7 @@
#define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
#define LHCALL_RING_SIZE 64
-struct hcall_args
-{
+struct hcall_args {
/* These map directly onto eax, ebx, ecx, edx in struct lguest_regs */
unsigned long arg0, arg2, arg3, arg1;
};
diff --git a/include/asm-x86/linkage.h b/include/asm-x86/linkage.h
index 31739c7..64e444f 100644
--- a/include/asm-x86/linkage.h
+++ b/include/asm-x86/linkage.h
@@ -1,6 +1,9 @@
#ifndef __ASM_LINKAGE_H
#define __ASM_LINKAGE_H
+#undef notrace
+#define notrace __attribute__((no_instrument_function))
+
#ifdef CONFIG_X86_64
#define __ALIGN .p2align 4,,15
#define __ALIGN_STR ".p2align 4,,15"
@@ -8,12 +11,45 @@
#ifdef CONFIG_X86_32
#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
-#define prevent_tail_call(ret) __asm__ ("" : "=r" (ret) : "0" (ret))
/*
* For 32-bit UML - mark functions implemented in assembly that use
* regparm input parameters:
*/
#define asmregparm __attribute__((regparm(3)))
+
+/*
+ * Make sure the compiler doesn't do anything stupid with the
+ * arguments on the stack - they are owned by the *caller*, not
+ * the callee. This just fools gcc into not spilling into them,
+ * and keeps it from doing tailcall recursion and/or using the
+ * stack slots for temporaries, since they are live and "used"
+ * all the way to the end of the function.
+ *
+ * NOTE! On x86-64, all the arguments are in registers, so this
+ * only matters on a 32-bit kernel.
+ */
+#define asmlinkage_protect(n, ret, args...) \
+ __asmlinkage_protect##n(ret, ##args)
+#define __asmlinkage_protect_n(ret, args...) \
+ __asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
+#define __asmlinkage_protect0(ret) \
+ __asmlinkage_protect_n(ret)
+#define __asmlinkage_protect1(ret, arg1) \
+ __asmlinkage_protect_n(ret, "g" (arg1))
+#define __asmlinkage_protect2(ret, arg1, arg2) \
+ __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2))
+#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
+ __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3))
+#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
+ __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+ "g" (arg4))
+#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
+ __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+ "g" (arg4), "g" (arg5))
+#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
+ __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+ "g" (arg4), "g" (arg5), "g" (arg6))
+
#endif
#ifdef CONFIG_X86_ALIGNMENT_16
diff --git a/include/asm-x86/local.h b/include/asm-x86/local.h
index f852c62..330a724 100644
--- a/include/asm-x86/local.h
+++ b/include/asm-x86/local.h
@@ -18,32 +18,28 @@
static inline void local_inc(local_t *l)
{
- __asm__ __volatile__(
- _ASM_INC "%0"
- :"+m" (l->a.counter));
+ asm volatile(_ASM_INC "%0"
+ : "+m" (l->a.counter));
}
static inline void local_dec(local_t *l)
{
- __asm__ __volatile__(
- _ASM_DEC "%0"
- :"+m" (l->a.counter));
+ asm volatile(_ASM_DEC "%0"
+ : "+m" (l->a.counter));
}
static inline void local_add(long i, local_t *l)
{
- __asm__ __volatile__(
- _ASM_ADD "%1,%0"
- :"+m" (l->a.counter)
- :"ir" (i));
+ asm volatile(_ASM_ADD "%1,%0"
+ : "+m" (l->a.counter)
+ : "ir" (i));
}
static inline void local_sub(long i, local_t *l)
{
- __asm__ __volatile__(
- _ASM_SUB "%1,%0"
- :"+m" (l->a.counter)
- :"ir" (i));
+ asm volatile(_ASM_SUB "%1,%0"
+ : "+m" (l->a.counter)
+ : "ir" (i));
}
/**
@@ -59,10 +55,9 @@
{
unsigned char c;
- __asm__ __volatile__(
- _ASM_SUB "%2,%0; sete %1"
- :"+m" (l->a.counter), "=qm" (c)
- :"ir" (i) : "memory");
+ asm volatile(_ASM_SUB "%2,%0; sete %1"
+ : "+m" (l->a.counter), "=qm" (c)
+ : "ir" (i) : "memory");
return c;
}
@@ -78,10 +73,9 @@
{
unsigned char c;
- __asm__ __volatile__(
- _ASM_DEC "%0; sete %1"
- :"+m" (l->a.counter), "=qm" (c)
- : : "memory");
+ asm volatile(_ASM_DEC "%0; sete %1"
+ : "+m" (l->a.counter), "=qm" (c)
+ : : "memory");
return c != 0;
}
@@ -97,10 +91,9 @@
{
unsigned char c;
- __asm__ __volatile__(
- _ASM_INC "%0; sete %1"
- :"+m" (l->a.counter), "=qm" (c)
- : : "memory");
+ asm volatile(_ASM_INC "%0; sete %1"
+ : "+m" (l->a.counter), "=qm" (c)
+ : : "memory");
return c != 0;
}
@@ -117,10 +110,9 @@
{
unsigned char c;
- __asm__ __volatile__(
- _ASM_ADD "%2,%0; sets %1"
- :"+m" (l->a.counter), "=qm" (c)
- :"ir" (i) : "memory");
+ asm volatile(_ASM_ADD "%2,%0; sets %1"
+ : "+m" (l->a.counter), "=qm" (c)
+ : "ir" (i) : "memory");
return c;
}
@@ -141,10 +133,9 @@
#endif
/* Modern 486+ processor */
__i = i;
- __asm__ __volatile__(
- _ASM_XADD "%0, %1;"
- :"+r" (i), "+m" (l->a.counter)
- : : "memory");
+ asm volatile(_ASM_XADD "%0, %1;"
+ : "+r" (i), "+m" (l->a.counter)
+ : : "memory");
return i + __i;
#ifdef CONFIG_M386
@@ -182,11 +173,11 @@
#define local_add_unless(l, a, u) \
({ \
long c, old; \
- c = local_read(l); \
+ c = local_read((l)); \
for (;;) { \
if (unlikely(c == (u))) \
break; \
- old = local_cmpxchg((l), c, c + (a)); \
+ old = local_cmpxchg((l), c, c + (a)); \
if (likely(old == c)) \
break; \
c = old; \
@@ -214,26 +205,30 @@
/* Need to disable preemption for the cpu local counters otherwise we could
still access a variable of a previous CPU in a non atomic way. */
-#define cpu_local_wrap_v(l) \
- ({ local_t res__; \
- preempt_disable(); \
- res__ = (l); \
- preempt_enable(); \
- res__; })
+#define cpu_local_wrap_v(l) \
+({ \
+ local_t res__; \
+ preempt_disable(); \
+ res__ = (l); \
+ preempt_enable(); \
+ res__; \
+})
#define cpu_local_wrap(l) \
- ({ preempt_disable(); \
- l; \
- preempt_enable(); }) \
+({ \
+ preempt_disable(); \
+ (l); \
+ preempt_enable(); \
+}) \
-#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
-#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
-#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l)))
-#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l)))
-#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
-#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
+#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var((l))))
+#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var((l)), (i)))
+#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var((l))))
+#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var((l))))
+#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var((l))))
+#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var((l))))
-#define __cpu_local_inc(l) cpu_local_inc(l)
-#define __cpu_local_dec(l) cpu_local_dec(l)
+#define __cpu_local_inc(l) cpu_local_inc((l))
+#define __cpu_local_dec(l) cpu_local_dec((l))
#define __cpu_local_add(i, l) cpu_local_add((i), (l))
#define __cpu_local_sub(i, l) cpu_local_sub((i), (l))
diff --git a/include/asm-x86/mach-bigsmp/mach_apic.h b/include/asm-x86/mach-bigsmp/mach_apic.h
index 6df235e..8327907 100644
--- a/include/asm-x86/mach-bigsmp/mach_apic.h
+++ b/include/asm-x86/mach-bigsmp/mach_apic.h
@@ -1,10 +1,7 @@
#ifndef __ASM_MACH_APIC_H
#define __ASM_MACH_APIC_H
-
-extern u8 bios_cpu_apicid[];
-
-#define xapic_phys_to_log_apicid(cpu) (bios_cpu_apicid[cpu])
+#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
#define esr_disable (1)
static inline int apic_id_registered(void)
@@ -90,7 +87,7 @@
static inline int cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < NR_CPUS)
- return (int) bios_cpu_apicid[mps_cpu];
+ return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
return BAD_APICID;
}
@@ -109,17 +106,6 @@
return cpu_physical_id(cpu);
}
-static inline int mpc_apic_id(struct mpc_config_processor *m,
- struct mpc_config_translation *translation_record)
-{
- printk("Processor #%d %u:%u APIC version %d\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver);
- return m->mpc_apicid;
-}
-
static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
{
/* For clustered we don't have a good way to do this yet - hack */
diff --git a/include/asm-x86/mach-default/mach_apic.h b/include/asm-x86/mach-default/mach_apic.h
index e3c2c10..0a6634f 100644
--- a/include/asm-x86/mach-default/mach_apic.h
+++ b/include/asm-x86/mach-default/mach_apic.h
@@ -1,6 +1,8 @@
#ifndef __ASM_MACH_APIC_H
#define __ASM_MACH_APIC_H
+#ifdef CONFIG_X86_LOCAL_APIC
+
#include <mach_apicdef.h>
#include <asm/smp.h>
@@ -14,24 +16,25 @@
return cpumask_of_cpu(0);
#endif
}
-#define TARGET_CPUS (target_cpus())
#define NO_BALANCE_IRQ (0)
#define esr_disable (0)
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
+#define INT_DEST_MODE (genapic->int_dest_mode)
+#define TARGET_CPUS (genapic->target_cpus())
+#define apic_id_registered (genapic->apic_id_registered)
+#define init_apic_ldr (genapic->init_apic_ldr)
+#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
+#define phys_pkg_id (genapic->phys_pkg_id)
+#define vector_allocation_domain (genapic->vector_allocation_domain)
+extern void setup_apic_routing(void);
+#else
#define INT_DELIVERY_MODE dest_LowestPrio
#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */
-
-static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
-{
- return physid_isset(apicid, bitmap);
-}
-
-static inline unsigned long check_apicid_present(int bit)
-{
- return physid_isset(bit, phys_cpu_present_map);
-}
-
+#define TARGET_CPUS (target_cpus())
/*
* Set up the logical destination ID.
*
@@ -49,27 +52,55 @@
apic_write_around(APIC_LDR, val);
}
+static inline int apic_id_registered(void)
+{
+ return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ return cpus_addr(cpumask)[0];
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+ return cpuid_apic >> index_msb;
+}
+
+static inline void setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_IO_APIC
+ printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
+ "Flat", nr_ioapics);
+#endif
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+ return 0;
+}
+#endif
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+ return physid_isset(bit, phys_cpu_present_map);
+}
+
static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
{
return phys_map;
}
-static inline void setup_apic_routing(void)
-{
- printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
- "Flat", nr_ioapics);
-}
-
static inline int multi_timer_check(int apic, int irq)
{
return 0;
}
-static inline int apicid_to_node(int logical_apicid)
-{
- return 0;
-}
-
/* Mapping from cpu number to logical apicid */
static inline int cpu_to_logical_apicid(int cpu)
{
@@ -78,8 +109,13 @@
static inline int cpu_present_to_apicid(int mps_cpu)
{
+#ifdef CONFIG_X86_64
+ if (cpu_present(mps_cpu))
+ return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
+#else
if (mps_cpu < get_physical_broadcast())
return mps_cpu;
+#endif
else
return BAD_APICID;
}
@@ -89,17 +125,6 @@
return physid_mask_of_physid(phys_apicid);
}
-static inline int mpc_apic_id(struct mpc_config_processor *m,
- struct mpc_config_translation *translation_record)
-{
- printk("Processor #%d %u:%u APIC version %d\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver);
- return m->mpc_apicid;
-}
-
static inline void setup_portio_remap(void)
{
}
@@ -109,23 +134,9 @@
return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
}
-static inline int apic_id_registered(void)
-{
- return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
-}
-
-static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
-{
- return cpus_addr(cpumask)[0];
-}
-
static inline void enable_apic_mode(void)
{
}
-static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
-{
- return cpuid_apic >> index_msb;
-}
-
+#endif /* CONFIG_X86_LOCAL_APIC */
#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-x86/mach-default/mach_apicdef.h b/include/asm-x86/mach-default/mach_apicdef.h
index ae98413..e4b29ba 100644
--- a/include/asm-x86/mach-default/mach_apicdef.h
+++ b/include/asm-x86/mach-default/mach_apicdef.h
@@ -3,10 +3,14 @@
#include <asm/apic.h>
+#ifdef CONFIG_X86_64
+#define APIC_ID_MASK (0xFFu<<24)
+#define GET_APIC_ID(x) (((x)>>24)&0xFFu)
+#define SET_APIC_ID(x) (((x)<<24))
+#else
#define APIC_ID_MASK (0xF<<24)
-
static inline unsigned get_apic_id(unsigned long x)
-{
+{
unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
if (APIC_XAPIC(ver))
return (((x)>>24)&0xFF);
@@ -15,5 +19,6 @@
}
#define GET_APIC_ID(x) get_apic_id(x)
+#endif
#endif
diff --git a/include/asm-x86/mach-default/mach_ipi.h b/include/asm-x86/mach-default/mach_ipi.h
index 0dba244..be32336 100644
--- a/include/asm-x86/mach-default/mach_ipi.h
+++ b/include/asm-x86/mach-default/mach_ipi.h
@@ -9,10 +9,15 @@
extern int no_broadcast;
+#ifdef CONFIG_X86_64
+#include <asm/genapic.h>
+#define send_IPI_mask (genapic->send_IPI_mask)
+#else
static inline void send_IPI_mask(cpumask_t mask, int vector)
{
send_IPI_mask_bitmask(mask, vector);
}
+#endif
static inline void __local_send_IPI_allbutself(int vector)
{
@@ -33,6 +38,10 @@
__send_IPI_shortcut(APIC_DEST_ALLINC, vector);
}
+#ifdef CONFIG_X86_64
+#define send_IPI_allbutself (genapic->send_IPI_allbutself)
+#define send_IPI_all (genapic->send_IPI_all)
+#else
static inline void send_IPI_allbutself(int vector)
{
/*
@@ -50,5 +59,6 @@
{
__local_send_IPI_all(vector);
}
+#endif
#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-x86/mach-default/mach_mpparse.h b/include/asm-x86/mach-default/mach_mpparse.h
index 1d38324..d141085 100644
--- a/include/asm-x86/mach-default/mach_mpparse.h
+++ b/include/asm-x86/mach-default/mach_mpparse.h
@@ -1,17 +1,6 @@
#ifndef __ASM_MACH_MPPARSE_H
#define __ASM_MACH_MPPARSE_H
-static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation)
-{
-// Dprintk("Bus #%d is %s\n", m->mpc_busid, name);
-}
-
-static inline void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation)
-{
-}
-
static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid)
{
diff --git a/include/asm-x86/mach-default/mach_reboot.h b/include/asm-x86/mach-default/mach_reboot.h
deleted file mode 100644
index 6adee6a..0000000
--- a/include/asm-x86/mach-default/mach_reboot.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * arch/i386/mach-generic/mach_reboot.h
- *
- * Machine specific reboot functions for generic.
- * Split out from reboot.c by Osamu Tomita <tomita@cinet.co.jp>
- */
-#ifndef _MACH_REBOOT_H
-#define _MACH_REBOOT_H
-
-static inline void kb_wait(void)
-{
- int i;
-
- for (i = 0; i < 0x10000; i++)
- if ((inb_p(0x64) & 0x02) == 0)
- break;
-}
-
-static inline void mach_reboot(void)
-{
- int i;
-
- /* old method, works on most machines */
- for (i = 0; i < 10; i++) {
- kb_wait();
- udelay(50);
- outb(0xfe, 0x64); /* pulse reset low */
- udelay(50);
- }
-
- /* New method: sets the "System flag" which, when set, indicates
- * successful completion of the keyboard controller self-test (Basic
- * Assurance Test, BAT). This is needed for some machines with no
- * keyboard plugged in. This read-modify-write sequence sets only the
- * system flag
- */
- for (i = 0; i < 10; i++) {
- int cmd;
-
- outb(0x20, 0x64); /* read Controller Command Byte */
- udelay(50);
- kb_wait();
- udelay(50);
- cmd = inb(0x60);
- udelay(50);
- kb_wait();
- udelay(50);
- outb(0x60, 0x64); /* write Controller Command Byte */
- udelay(50);
- kb_wait();
- udelay(50);
- outb(cmd | 0x14, 0x60); /* set "System flag" and "Keyboard Disabled" */
- udelay(50);
- kb_wait();
- udelay(50);
- outb(0xfe, 0x64); /* pulse reset low */
- udelay(50);
- }
-}
-
-#endif /* !_MACH_REBOOT_H */
diff --git a/include/asm-x86/mach-default/smpboot_hooks.h b/include/asm-x86/mach-default/smpboot_hooks.h
index 7f45f63..3ff2c5b 100644
--- a/include/asm-x86/mach-default/smpboot_hooks.h
+++ b/include/asm-x86/mach-default/smpboot_hooks.h
@@ -41,4 +41,11 @@
*/
if (!skip_ioapic_setup && nr_ioapics)
setup_IO_APIC();
+ else
+ nr_ioapics = 0;
+}
+
+static inline void smpboot_clear_io_apic(void)
+{
+ nr_ioapics = 0;
}
diff --git a/include/asm-x86/mach-es7000/mach_apic.h b/include/asm-x86/mach-es7000/mach_apic.h
index d23011f..fbc8ad2 100644
--- a/include/asm-x86/mach-es7000/mach_apic.h
+++ b/include/asm-x86/mach-es7000/mach_apic.h
@@ -1,9 +1,7 @@
#ifndef __ASM_MACH_APIC_H
#define __ASM_MACH_APIC_H
-extern u8 bios_cpu_apicid[];
-
-#define xapic_phys_to_log_apicid(cpu) (bios_cpu_apicid[cpu])
+#define xapic_phys_to_log_apicid(cpu) per_cpu(x86_bios_cpu_apicid, cpu)
#define esr_disable (1)
static inline int apic_id_registered(void)
@@ -80,7 +78,7 @@
extern int apic_version [MAX_APICS];
static inline void setup_apic_routing(void)
{
- int apic = bios_cpu_apicid[smp_processor_id()];
+ int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id());
printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
(apic_version[apic] == 0x14) ?
"Physical Cluster" : "Logical Cluster", nr_ioapics, cpus_addr(TARGET_CPUS)[0]);
@@ -102,7 +100,7 @@
if (!mps_cpu)
return boot_cpu_physical_apicid;
else if (mps_cpu < NR_CPUS)
- return (int) bios_cpu_apicid[mps_cpu];
+ return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
else
return BAD_APICID;
}
@@ -129,16 +127,6 @@
#endif
}
-static inline int mpc_apic_id(struct mpc_config_processor *m, struct mpc_config_translation *unused)
-{
- printk("Processor #%d %u:%u APIC version %d\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver);
- return (m->mpc_apicid);
-}
-
static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
{
/* For clustered we don't have a good way to do this yet - hack */
@@ -153,7 +141,7 @@
extern unsigned int boot_cpu_physical_apicid;
static inline int check_phys_apicid_present(int cpu_physical_apicid)
{
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+ boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
return (1);
}
diff --git a/include/asm-x86/mach-es7000/mach_mpparse.h b/include/asm-x86/mach-es7000/mach_mpparse.h
index 52ee75c..ef26d35 100644
--- a/include/asm-x86/mach-es7000/mach_mpparse.h
+++ b/include/asm-x86/mach-es7000/mach_mpparse.h
@@ -3,17 +3,6 @@
#include <linux/acpi.h>
-static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation)
-{
- Dprintk("Bus #%d is %s\n", m->mpc_busid, name);
-}
-
-static inline void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation)
-{
-}
-
extern int parse_unisys_oem (char *oemptr);
extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
extern void setup_unisys(void);
diff --git a/include/asm-x86/mach-generic/mach_apic.h b/include/asm-x86/mach-generic/mach_apic.h
index a236e70..6eff343 100644
--- a/include/asm-x86/mach-generic/mach_apic.h
+++ b/include/asm-x86/mach-generic/mach_apic.h
@@ -19,7 +19,6 @@
#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid)
#define cpu_present_to_apicid (genapic->cpu_present_to_apicid)
#define apicid_to_cpu_present (genapic->apicid_to_cpu_present)
-#define mpc_apic_id (genapic->mpc_apic_id)
#define setup_portio_remap (genapic->setup_portio_remap)
#define check_apicid_present (genapic->check_apicid_present)
#define check_phys_apicid_present (genapic->check_phys_apicid_present)
diff --git a/include/asm-x86/mach-generic/mach_mpparse.h b/include/asm-x86/mach-generic/mach_mpparse.h
index dbd9fce..0d0b5ba 100644
--- a/include/asm-x86/mach-generic/mach_mpparse.h
+++ b/include/asm-x86/mach-generic/mach_mpparse.h
@@ -1,11 +1,6 @@
#ifndef _MACH_MPPARSE_H
#define _MACH_MPPARSE_H 1
-#include <asm/genapic.h>
-
-#define mpc_oem_bus_info (genapic->mpc_oem_bus_info)
-#define mpc_oem_pci_bus (genapic->mpc_oem_pci_bus)
-
int mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid);
int acpi_madt_oem_check(char *oem_id, char *oem_table_id);
diff --git a/include/asm-x86/mach-numaq/mach_apic.h b/include/asm-x86/mach-numaq/mach_apic.h
index 3b637fa..75a56e5 100644
--- a/include/asm-x86/mach-numaq/mach_apic.h
+++ b/include/asm-x86/mach-numaq/mach_apic.h
@@ -95,6 +95,16 @@
return physid_mask_of_physid(cpu + 4*node);
}
+struct mpc_config_translation {
+ unsigned char mpc_type;
+ unsigned char trans_len;
+ unsigned char trans_type;
+ unsigned char trans_quad;
+ unsigned char trans_global;
+ unsigned char trans_local;
+ unsigned short trans_reserved;
+};
+
static inline int mpc_apic_id(struct mpc_config_processor *m,
struct mpc_config_translation *translation_record)
{
diff --git a/include/asm-x86/mach-numaq/mach_mpparse.h b/include/asm-x86/mach-numaq/mach_mpparse.h
index 51bbac8..459b124 100644
--- a/include/asm-x86/mach-numaq/mach_mpparse.h
+++ b/include/asm-x86/mach-numaq/mach_mpparse.h
@@ -1,25 +1,10 @@
#ifndef __ASM_MACH_MPPARSE_H
#define __ASM_MACH_MPPARSE_H
-static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation)
-{
- int quad = translation->trans_quad;
- int local = translation->trans_local;
-
- mp_bus_id_to_node[m->mpc_busid] = quad;
- mp_bus_id_to_local[m->mpc_busid] = local;
- printk("Bus #%d is %s (node %d)\n", m->mpc_busid, name, quad);
-}
-
-static inline void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation)
-{
- int quad = translation->trans_quad;
- int local = translation->trans_local;
-
- quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
+extern void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
+ struct mpc_config_translation *translation);
+extern void mpc_oem_pci_bus(struct mpc_config_bus *m,
+ struct mpc_config_translation *translation);
/* Hook from generic ACPI tables.c */
static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
diff --git a/include/asm-x86/mach-summit/mach_apic.h b/include/asm-x86/mach-summit/mach_apic.h
index 062c97f..1f76c2e 100644
--- a/include/asm-x86/mach-summit/mach_apic.h
+++ b/include/asm-x86/mach-summit/mach_apic.h
@@ -40,7 +40,6 @@
#define apicid_cluster(apicid) ((apicid) & XAPIC_DEST_CLUSTER_MASK)
-extern u8 bios_cpu_apicid[];
extern u8 cpu_2_logical_apicid[];
static inline void init_apic_ldr(void)
@@ -110,7 +109,7 @@
static inline int cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < NR_CPUS)
- return (int)bios_cpu_apicid[mps_cpu];
+ return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
else
return BAD_APICID;
}
@@ -126,17 +125,6 @@
return physid_mask_of_physid(0);
}
-static inline int mpc_apic_id(struct mpc_config_processor *m,
- struct mpc_config_translation *translation_record)
-{
- printk("Processor #%d %u:%u APIC version %d\n",
- m->mpc_apicid,
- (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
- m->mpc_apicver);
- return m->mpc_apicid;
-}
-
static inline void setup_portio_remap(void)
{
}
diff --git a/include/asm-x86/mach-summit/mach_mpparse.h b/include/asm-x86/mach-summit/mach_mpparse.h
index c252053..fdf5917 100644
--- a/include/asm-x86/mach-summit/mach_mpparse.h
+++ b/include/asm-x86/mach-summit/mach_mpparse.h
@@ -12,17 +12,6 @@
#define setup_summit() {}
#endif
-static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
- struct mpc_config_translation *translation)
-{
- Dprintk("Bus #%d is %s\n", m->mpc_busid, name);
-}
-
-static inline void mpc_oem_pci_bus(struct mpc_config_bus *m,
- struct mpc_config_translation *translation)
-{
-}
-
static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
char *productid)
{
diff --git a/include/asm-x86/mach-visws/mach_apic.h b/include/asm-x86/mach-visws/mach_apic.h
index efac6f0..a9ef33a 100644
--- a/include/asm-x86/mach-visws/mach_apic.h
+++ b/include/asm-x86/mach-visws/mach_apic.h
@@ -23,7 +23,7 @@
static inline int apic_id_registered(void)
{
- return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
+ return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
}
/*
diff --git a/include/asm-x86/mach-visws/smpboot_hooks.h b/include/asm-x86/mach-visws/smpboot_hooks.h
index d926471..c9b83e3 100644
--- a/include/asm-x86/mach-visws/smpboot_hooks.h
+++ b/include/asm-x86/mach-visws/smpboot_hooks.h
@@ -22,3 +22,7 @@
static inline void smpboot_setup_io_apic(void)
{
}
+
+static inline void smpboot_clear_io_apic(void)
+{
+}
diff --git a/include/asm-x86/mach_apic.h b/include/asm-x86/mach_apic.h
deleted file mode 100644
index 7b7115a..0000000
--- a/include/asm-x86/mach_apic.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-/*
- * Copyright 2004 James Cleverdon, IBM.
- * Subject to the GNU Public License, v.2
- *
- * Generic APIC sub-arch defines.
- *
- * Hacked for x86-64 by James Cleverdon from i386 architecture code by
- * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
- * James Cleverdon.
- */
-
-#include <asm/genapic.h>
-
-#define INT_DELIVERY_MODE (genapic->int_delivery_mode)
-#define INT_DEST_MODE (genapic->int_dest_mode)
-#define TARGET_CPUS (genapic->target_cpus())
-#define vector_allocation_domain (genapic->vector_allocation_domain)
-#define apic_id_registered (genapic->apic_id_registered)
-#define init_apic_ldr (genapic->init_apic_ldr)
-#define send_IPI_mask (genapic->send_IPI_mask)
-#define send_IPI_allbutself (genapic->send_IPI_allbutself)
-#define send_IPI_all (genapic->send_IPI_all)
-#define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid)
-#define phys_pkg_id (genapic->phys_pkg_id)
-
-#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-x86/mc146818rtc.h b/include/asm-x86/mc146818rtc.h
index cdd9f96..daf1ccd 100644
--- a/include/asm-x86/mc146818rtc.h
+++ b/include/asm-x86/mc146818rtc.h
@@ -42,7 +42,7 @@
static inline void lock_cmos(unsigned char reg)
{
unsigned long new;
- new = ((smp_processor_id()+1) << 8) | reg;
+ new = ((smp_processor_id() + 1) << 8) | reg;
for (;;) {
if (cmos_lock) {
cpu_relax();
@@ -57,22 +57,26 @@
{
cmos_lock = 0;
}
+
static inline int do_i_have_lock_cmos(void)
{
- return (cmos_lock >> 8) == (smp_processor_id()+1);
+ return (cmos_lock >> 8) == (smp_processor_id() + 1);
}
+
static inline unsigned char current_lock_cmos_reg(void)
{
return cmos_lock & 0xff;
}
-#define lock_cmos_prefix(reg) \
+
+#define lock_cmos_prefix(reg) \
do { \
unsigned long cmos_flags; \
local_irq_save(cmos_flags); \
lock_cmos(reg)
-#define lock_cmos_suffix(reg) \
- unlock_cmos(); \
- local_irq_restore(cmos_flags); \
+
+#define lock_cmos_suffix(reg) \
+ unlock_cmos(); \
+ local_irq_restore(cmos_flags); \
} while (0)
#else
#define lock_cmos_prefix(reg) do {} while (0)
diff --git a/include/asm-x86/mca_dma.h b/include/asm-x86/mca_dma.h
index fbb1f3b..c3dca6e 100644
--- a/include/asm-x86/mca_dma.h
+++ b/include/asm-x86/mca_dma.h
@@ -12,18 +12,18 @@
* count by 2 when using 16-bit dma; that is not handled by these functions.
*
* Ramen Noodles are yummy.
- *
- * 1998 Tymm Twillman <tymm@computer.org>
+ *
+ * 1998 Tymm Twillman <tymm@computer.org>
*/
/*
- * Registers that are used by the DMA controller; FN is the function register
+ * Registers that are used by the DMA controller; FN is the function register
* (tell the controller what to do) and EXE is the execution register (how
* to do it)
*/
#define MCA_DMA_REG_FN 0x18
-#define MCA_DMA_REG_EXE 0x1A
+#define MCA_DMA_REG_EXE 0x1A
/*
* Functions that the DMA controller can do
@@ -43,9 +43,9 @@
/*
* Modes (used by setting MCA_DMA_FN_MODE in the function register)
- *
+ *
* Note that the MODE_READ is read from memory (write to device), and
- * MODE_WRITE is vice-versa.
+ * MODE_WRITE is vice-versa.
*/
#define MCA_DMA_MODE_XFER 0x04 /* read by default */
@@ -63,7 +63,7 @@
* IRQ context.
*/
-static __inline__ void mca_enable_dma(unsigned int dmanr)
+static inline void mca_enable_dma(unsigned int dmanr)
{
outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN);
}
@@ -76,7 +76,7 @@
* IRQ context.
*/
-static __inline__ void mca_disable_dma(unsigned int dmanr)
+static inline void mca_disable_dma(unsigned int dmanr)
{
outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN);
}
@@ -87,10 +87,10 @@
* @a: 24bit bus address
*
* Load the address register in the DMA controller. This has a 24bit
- * limitation (16Mb).
+ * limitation (16Mb).
*/
-static __inline__ void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
+static inline void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
{
outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN);
outb(a & 0xff, MCA_DMA_REG_EXE);
@@ -106,14 +106,14 @@
* limitation (16Mb). The return is a bus address.
*/
-static __inline__ unsigned int mca_get_dma_addr(unsigned int dmanr)
+static inline unsigned int mca_get_dma_addr(unsigned int dmanr)
{
unsigned int addr;
outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN);
addr = inb(MCA_DMA_REG_EXE);
addr |= inb(MCA_DMA_REG_EXE) << 8;
- addr |= inb(MCA_DMA_REG_EXE) << 16;
+ addr |= inb(MCA_DMA_REG_EXE) << 16;
return addr;
}
@@ -127,7 +127,7 @@
* Setting a count of zero will not do what you expect.
*/
-static __inline__ void mca_set_dma_count(unsigned int dmanr, unsigned int count)
+static inline void mca_set_dma_count(unsigned int dmanr, unsigned int count)
{
count--; /* transfers one more than count -- correct for this */
@@ -144,7 +144,7 @@
* on this DMA channel.
*/
-static __inline__ unsigned int mca_get_dma_residue(unsigned int dmanr)
+static inline unsigned int mca_get_dma_residue(unsigned int dmanr)
{
unsigned short count;
@@ -164,12 +164,12 @@
* with an I/O port target.
*/
-static __inline__ void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
+static inline void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
{
/*
* DMA from a port address -- set the io address
*/
-
+
outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN);
outb(io_addr & 0xff, MCA_DMA_REG_EXE);
outb((io_addr >> 8) & 0xff, MCA_DMA_REG_EXE);
@@ -192,7 +192,7 @@
* %MCA_DMA_MODE_16 to do 16bit transfers.
*/
-static __inline__ void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
+static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
{
outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN);
outb(mode, MCA_DMA_REG_EXE);
diff --git a/include/asm-x86/mmu.h b/include/asm-x86/mmu.h
index efa962c..00e8867 100644
--- a/include/asm-x86/mmu.h
+++ b/include/asm-x86/mmu.h
@@ -10,10 +10,10 @@
*
* cpu_vm_mask is used to optimize ldt flushing.
*/
-typedef struct {
+typedef struct {
void *ldt;
#ifdef CONFIG_X86_64
- rwlock_t ldtlock;
+ rwlock_t ldtlock;
#endif
int size;
struct mutex lock;
diff --git a/include/asm-x86/mmu_context_32.h b/include/asm-x86/mmu_context_32.h
index 8198d1c..9756ae0 100644
--- a/include/asm-x86/mmu_context_32.h
+++ b/include/asm-x86/mmu_context_32.h
@@ -62,7 +62,7 @@
BUG_ON(per_cpu(cpu_tlbstate, cpu).active_mm != next);
if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
- /* We were in lazy tlb mode and leave_mm disabled
+ /* We were in lazy tlb mode and leave_mm disabled
* tlb flush IPI delivery. We must reload %cr3.
*/
load_cr3(next->pgd);
@@ -75,10 +75,10 @@
#define deactivate_mm(tsk, mm) \
asm("movl %0,%%gs": :"r" (0));
-#define activate_mm(prev, next) \
- do { \
- paravirt_activate_mm(prev, next); \
- switch_mm((prev),(next),NULL); \
- } while(0);
+#define activate_mm(prev, next) \
+do { \
+ paravirt_activate_mm((prev), (next)); \
+ switch_mm((prev), (next), NULL); \
+} while (0);
#endif
diff --git a/include/asm-x86/mmu_context_64.h b/include/asm-x86/mmu_context_64.h
index ad6dc82..ca44c71 100644
--- a/include/asm-x86/mmu_context_64.h
+++ b/include/asm-x86/mmu_context_64.h
@@ -20,12 +20,12 @@
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
#ifdef CONFIG_SMP
- if (read_pda(mmu_state) == TLBSTATE_OK)
+ if (read_pda(mmu_state) == TLBSTATE_OK)
write_pda(mmu_state, TLBSTATE_LAZY);
#endif
}
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
unsigned cpu = smp_processor_id();
@@ -39,7 +39,7 @@
cpu_set(cpu, next->cpu_vm_mask);
load_cr3(next->pgd);
- if (unlikely(next->context.ldt != prev->context.ldt))
+ if (unlikely(next->context.ldt != prev->context.ldt))
load_LDT_nolock(&next->context);
}
#ifdef CONFIG_SMP
@@ -48,7 +48,7 @@
if (read_pda(active_mm) != next)
BUG();
if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
- /* We were in lazy tlb mode and leave_mm disabled
+ /* We were in lazy tlb mode and leave_mm disabled
* tlb flush IPI delivery. We must reload CR3
* to make sure to use no freed page tables.
*/
@@ -59,13 +59,14 @@
#endif
}
-#define deactivate_mm(tsk,mm) do { \
- load_gs_index(0); \
- asm volatile("movl %0,%%fs"::"r"(0)); \
-} while(0)
+#define deactivate_mm(tsk, mm) \
+do { \
+ load_gs_index(0); \
+ asm volatile("movl %0,%%fs"::"r"(0)); \
+} while (0)
-#define activate_mm(prev, next) \
- switch_mm((prev),(next),NULL)
+#define activate_mm(prev, next) \
+ switch_mm((prev), (next), NULL)
#endif
diff --git a/include/asm-x86/mmx.h b/include/asm-x86/mmx.h
index 46b71da..9408812 100644
--- a/include/asm-x86/mmx.h
+++ b/include/asm-x86/mmx.h
@@ -6,7 +6,7 @@
*/
#include <linux/types.h>
-
+
extern void *_mmx_memcpy(void *to, const void *from, size_t size);
extern void mmx_clear_page(void *page);
extern void mmx_copy_page(void *to, void *from);
diff --git a/include/asm-x86/mmzone_32.h b/include/asm-x86/mmzone_32.h
index 274a595..cb2cad0 100644
--- a/include/asm-x86/mmzone_32.h
+++ b/include/asm-x86/mmzone_32.h
@@ -18,7 +18,7 @@
#include <asm/srat.h>
#endif
-extern int get_memcfg_numa_flat(void );
+extern int get_memcfg_numa_flat(void);
/*
* This allows any one NUMA architecture to be compiled
* for, and still fall back to the flat function if it
@@ -129,7 +129,7 @@
struct pglist_data __maybe_unused \
*__alloc_bootmem_node__pgdat = (pgdat); \
__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, \
- __pa(MAX_DMA_ADDRESS)) \
+ __pa(MAX_DMA_ADDRESS)); \
})
#define alloc_bootmem_low_pages_node(pgdat, x) \
({ \
diff --git a/include/asm-x86/mmzone_64.h b/include/asm-x86/mmzone_64.h
index ebaf966..594bd0d 100644
--- a/include/asm-x86/mmzone_64.h
+++ b/include/asm-x86/mmzone_64.h
@@ -7,7 +7,7 @@
#ifdef CONFIG_NUMA
-#define VIRTUAL_BUG_ON(x)
+#define VIRTUAL_BUG_ON(x)
#include <asm/smp.h>
@@ -16,7 +16,7 @@
int shift;
unsigned int mapsize;
s16 *map;
- s16 embedded_map[64-8];
+ s16 embedded_map[64 - 8];
} ____cacheline_aligned; /* total size = 128 bytes */
extern struct memnode memnode;
#define memnode_shift memnode.shift
@@ -25,27 +25,27 @@
extern struct pglist_data *node_data[];
-static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
-{
- unsigned nid;
+static inline __attribute__((pure)) int phys_to_nid(unsigned long addr)
+{
+ unsigned nid;
VIRTUAL_BUG_ON(!memnodemap);
VIRTUAL_BUG_ON((addr >> memnode_shift) >= memnodemapsize);
- nid = memnodemap[addr >> memnode_shift];
- VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]);
- return nid;
-}
+ nid = memnodemap[addr >> memnode_shift];
+ VIRTUAL_BUG_ON(nid >= MAX_NUMNODES || !node_data[nid]);
+ return nid;
+}
#define NODE_DATA(nid) (node_data[nid])
#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \
+#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \
NODE_DATA(nid)->node_spanned_pages)
extern int early_pfn_to_nid(unsigned long pfn);
#ifdef CONFIG_NUMA_EMU
-#define FAKE_NODE_MIN_SIZE (64*1024*1024)
-#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1uL))
+#define FAKE_NODE_MIN_SIZE (64 * 1024 * 1024)
+#define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL))
#endif
#endif
diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h
index 781ad74..57a991b 100644
--- a/include/asm-x86/mpspec.h
+++ b/include/asm-x86/mpspec.h
@@ -1,16 +1,13 @@
#ifndef _AM_X86_MPSPEC_H
#define _AM_X86_MPSPEC_H
+#include <linux/init.h>
+
#include <asm/mpspec_def.h>
#ifdef CONFIG_X86_32
#include <mach_mpspec.h>
-extern int mp_bus_id_to_type[MAX_MP_BUSSES];
-extern int mp_bus_id_to_node[MAX_MP_BUSSES];
-extern int mp_bus_id_to_local[MAX_MP_BUSSES];
-extern int quad_local_to_mp_bus_id[NR_CPUS/4][4];
-
extern unsigned int def_to_bigsmp;
extern int apic_version[MAX_APICS];
extern u8 apicid_2_node[];
@@ -24,27 +21,30 @@
/* Each PCI slot may be a combo card with its own bus. 4 IRQ pins per slot. */
#define MAX_IRQ_SOURCES (MAX_MP_BUSSES * 4)
-extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+extern void early_find_smp_config(void);
+extern void early_get_smp_config(void);
#endif
+#if defined(CONFIG_MCA) || defined(CONFIG_EISA)
+extern int mp_bus_id_to_type[MAX_MP_BUSSES];
+#endif
+
+extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+
extern int mp_bus_id_to_pci_bus[MAX_MP_BUSSES];
extern unsigned int boot_cpu_physical_apicid;
extern int smp_found_config;
-extern int nr_ioapics;
-extern int mp_irq_entries;
-extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
extern int mpc_default_type;
extern unsigned long mp_lapic_addr;
extern void find_smp_config(void);
extern void get_smp_config(void);
+void __cpuinit generic_processor_info(int apicid, int version);
#ifdef CONFIG_ACPI
-extern void mp_register_lapic(u8 id, u8 enabled);
-extern void mp_register_lapic_address(u64 address);
-extern void mp_register_ioapic(u8 id, u32 address, u32 gsi_base);
+extern void mp_register_ioapic(int id, u32 address, u32 gsi_base);
extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
u32 gsi);
extern void mp_config_acpi_legacy_irqs(void);
@@ -53,8 +53,7 @@
#define PHYSID_ARRAY_SIZE BITS_TO_LONGS(MAX_APICS)
-struct physid_mask
-{
+struct physid_mask {
unsigned long mask[PHYSID_ARRAY_SIZE];
};
@@ -63,34 +62,34 @@
#define physid_set(physid, map) set_bit(physid, (map).mask)
#define physid_clear(physid, map) clear_bit(physid, (map).mask)
#define physid_isset(physid, map) test_bit(physid, (map).mask)
-#define physid_test_and_set(physid, map) \
+#define physid_test_and_set(physid, map) \
test_and_set_bit(physid, (map).mask)
-#define physids_and(dst, src1, src2) \
+#define physids_and(dst, src1, src2) \
bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
-#define physids_or(dst, src1, src2) \
+#define physids_or(dst, src1, src2) \
bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
-#define physids_clear(map) \
+#define physids_clear(map) \
bitmap_zero((map).mask, MAX_APICS)
-#define physids_complement(dst, src) \
+#define physids_complement(dst, src) \
bitmap_complement((dst).mask, (src).mask, MAX_APICS)
-#define physids_empty(map) \
+#define physids_empty(map) \
bitmap_empty((map).mask, MAX_APICS)
-#define physids_equal(map1, map2) \
+#define physids_equal(map1, map2) \
bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
-#define physids_weight(map) \
+#define physids_weight(map) \
bitmap_weight((map).mask, MAX_APICS)
-#define physids_shift_right(d, s, n) \
+#define physids_shift_right(d, s, n) \
bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
-#define physids_shift_left(d, s, n) \
+#define physids_shift_left(d, s, n) \
bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
#define physids_coerce(map) ((map).mask[0])
diff --git a/include/asm-x86/mpspec_def.h b/include/asm-x86/mpspec_def.h
index 3504617..dc6ef85 100644
--- a/include/asm-x86/mpspec_def.h
+++ b/include/asm-x86/mpspec_def.h
@@ -11,7 +11,7 @@
* information is.
*/
-#define SMP_MAGIC_IDENT (('_'<<24)|('P'<<16)|('M'<<8)|'_')
+#define SMP_MAGIC_IDENT (('_'<<24) | ('P'<<16) | ('M'<<8) | '_')
#ifdef CONFIG_X86_32
# define MAX_MPC_ENTRY 1024
@@ -23,8 +23,7 @@
# define MAX_APICS 255
#endif
-struct intel_mp_floating
-{
+struct intel_mp_floating {
char mpf_signature[4]; /* "_MP_" */
unsigned int mpf_physptr; /* Configuration table address */
unsigned char mpf_length; /* Our length (paragraphs) */
@@ -39,14 +38,13 @@
#define MPC_SIGNATURE "PCMP"
-struct mp_config_table
-{
+struct mp_config_table {
char mpc_signature[4];
unsigned short mpc_length; /* Size of table */
- char mpc_spec; /* 0x01 */
- char mpc_checksum;
- char mpc_oem[8];
- char mpc_productid[12];
+ char mpc_spec; /* 0x01 */
+ char mpc_checksum;
+ char mpc_oem[8];
+ char mpc_productid[12];
unsigned int mpc_oemptr; /* 0 if not present */
unsigned short mpc_oemsize; /* 0 if not present */
unsigned short mpc_oemcount;
@@ -71,8 +69,7 @@
#define CPU_MODEL_MASK 0x00F0
#define CPU_FAMILY_MASK 0x0F00
-struct mpc_config_processor
-{
+struct mpc_config_processor {
unsigned char mpc_type;
unsigned char mpc_apicid; /* Local APIC number */
unsigned char mpc_apicver; /* Its versions */
@@ -82,8 +79,7 @@
unsigned int mpc_reserved[2];
};
-struct mpc_config_bus
-{
+struct mpc_config_bus {
unsigned char mpc_type;
unsigned char mpc_busid;
unsigned char mpc_bustype[6];
@@ -111,8 +107,7 @@
#define MPC_APIC_USABLE 0x01
-struct mpc_config_ioapic
-{
+struct mpc_config_ioapic {
unsigned char mpc_type;
unsigned char mpc_apicid;
unsigned char mpc_apicver;
@@ -120,8 +115,7 @@
unsigned int mpc_apicaddr;
};
-struct mpc_config_intsrc
-{
+struct mpc_config_intsrc {
unsigned char mpc_type;
unsigned char mpc_irqtype;
unsigned short mpc_irqflag;
@@ -144,8 +138,7 @@
#define MP_APIC_ALL 0xFF
-struct mpc_config_lintsrc
-{
+struct mpc_config_lintsrc {
unsigned char mpc_type;
unsigned char mpc_irqtype;
unsigned short mpc_irqflag;
@@ -157,8 +150,7 @@
#define MPC_OEM_SIGNATURE "_OEM"
-struct mp_config_oemtable
-{
+struct mp_config_oemtable {
char oem_signature[4];
unsigned short oem_length; /* Size of table */
char oem_rev; /* 0x01 */
@@ -166,17 +158,6 @@
char mpc_oem[8];
};
-struct mpc_config_translation
-{
- unsigned char mpc_type;
- unsigned char trans_len;
- unsigned char trans_type;
- unsigned char trans_quad;
- unsigned char trans_global;
- unsigned char trans_local;
- unsigned short trans_reserved;
-};
-
/*
* Default configurations
*
@@ -196,4 +177,3 @@
MP_BUS_MCA,
};
#endif
-
diff --git a/include/asm-x86/msidef.h b/include/asm-x86/msidef.h
index 5b8acdd..296f29c 100644
--- a/include/asm-x86/msidef.h
+++ b/include/asm-x86/msidef.h
@@ -11,7 +11,8 @@
#define MSI_DATA_VECTOR_SHIFT 0
#define MSI_DATA_VECTOR_MASK 0x000000ff
-#define MSI_DATA_VECTOR(v) (((v) << MSI_DATA_VECTOR_SHIFT) & MSI_DATA_VECTOR_MASK)
+#define MSI_DATA_VECTOR(v) (((v) << MSI_DATA_VECTOR_SHIFT) & \
+ MSI_DATA_VECTOR_MASK)
#define MSI_DATA_DELIVERY_MODE_SHIFT 8
#define MSI_DATA_DELIVERY_FIXED (0 << MSI_DATA_DELIVERY_MODE_SHIFT)
@@ -37,11 +38,14 @@
#define MSI_ADDR_DEST_MODE_LOGICAL (1 << MSI_ADDR_DEST_MODE_SHIFT)
#define MSI_ADDR_REDIRECTION_SHIFT 3
-#define MSI_ADDR_REDIRECTION_CPU (0 << MSI_ADDR_REDIRECTION_SHIFT) /* dedicated cpu */
-#define MSI_ADDR_REDIRECTION_LOWPRI (1 << MSI_ADDR_REDIRECTION_SHIFT) /* lowest priority */
+#define MSI_ADDR_REDIRECTION_CPU (0 << MSI_ADDR_REDIRECTION_SHIFT)
+ /* dedicated cpu */
+#define MSI_ADDR_REDIRECTION_LOWPRI (1 << MSI_ADDR_REDIRECTION_SHIFT)
+ /* lowest priority */
#define MSI_ADDR_DEST_ID_SHIFT 12
#define MSI_ADDR_DEST_ID_MASK 0x00ffff0
-#define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & MSI_ADDR_DEST_ID_MASK)
+#define MSI_ADDR_DEST_ID(dest) (((dest) << MSI_ADDR_DEST_ID_SHIFT) & \
+ MSI_ADDR_DEST_ID_MASK)
#endif /* ASM_MSIDEF_H */
diff --git a/include/asm-x86/msr-index.h b/include/asm-x86/msr-index.h
index fae118a..09413ad 100644
--- a/include/asm-x86/msr-index.h
+++ b/include/asm-x86/msr-index.h
@@ -57,6 +57,8 @@
#define MSR_MTRRfix4K_F8000 0x0000026f
#define MSR_MTRRdefType 0x000002ff
+#define MSR_IA32_CR_PAT 0x00000277
+
#define MSR_IA32_DEBUGCTLMSR 0x000001d9
#define MSR_IA32_LASTBRANCHFROMIP 0x000001db
#define MSR_IA32_LASTBRANCHTOIP 0x000001dc
@@ -83,6 +85,7 @@
/* AMD64 MSRs. Not complete. See the architecture manual for a more
complete list. */
+#define MSR_AMD64_NB_CFG 0xc001001f
#define MSR_AMD64_IBSFETCHCTL 0xc0011030
#define MSR_AMD64_IBSFETCHLINAD 0xc0011031
#define MSR_AMD64_IBSFETCHPHYSAD 0xc0011032
@@ -109,6 +112,7 @@
#define MSR_K8_SYSCFG 0xc0010010
#define MSR_K8_HWCR 0xc0010015
#define MSR_K8_ENABLE_C1E 0xc0010055
+#define MSR_K8_TSEG_ADDR 0xc0010112
#define K8_MTRRFIXRANGE_DRAM_ENABLE 0x00040000 /* MtrrFixDramEn bit */
#define K8_MTRRFIXRANGE_DRAM_MODIFY 0x00080000 /* MtrrFixDramModEn bit */
#define K8_MTRR_RDMEM_WRMEM_MASK 0x18181818 /* Mask: RdMem|WrMem */
diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h
index 3ca29eb..3707650 100644
--- a/include/asm-x86/msr.h
+++ b/include/asm-x86/msr.h
@@ -16,8 +16,8 @@
static inline unsigned long long native_read_tscp(unsigned int *aux)
{
unsigned long low, high;
- asm volatile (".byte 0x0f,0x01,0xf9"
- : "=a" (low), "=d" (high), "=c" (*aux));
+ asm volatile(".byte 0x0f,0x01,0xf9"
+ : "=a" (low), "=d" (high), "=c" (*aux));
return low | ((u64)high >> 32);
}
@@ -29,7 +29,7 @@
*/
#ifdef CONFIG_X86_64
#define DECLARE_ARGS(val, low, high) unsigned low, high
-#define EAX_EDX_VAL(val, low, high) (low | ((u64)(high) << 32))
+#define EAX_EDX_VAL(val, low, high) ((low) | ((u64)(high) << 32))
#define EAX_EDX_ARGS(val, low, high) "a" (low), "d" (high)
#define EAX_EDX_RET(val, low, high) "=a" (low), "=d" (high)
#else
@@ -57,7 +57,7 @@
".section .fixup,\"ax\"\n\t"
"3: mov %3,%0 ; jmp 1b\n\t"
".previous\n\t"
- _ASM_EXTABLE(2b,3b)
+ _ASM_EXTABLE(2b, 3b)
: "=r" (*err), EAX_EDX_RET(val, low, high)
: "c" (msr), "i" (-EFAULT));
return EAX_EDX_VAL(val, low, high);
@@ -78,10 +78,10 @@
".section .fixup,\"ax\"\n\t"
"3: mov %4,%0 ; jmp 1b\n\t"
".previous\n\t"
- _ASM_EXTABLE(2b,3b)
+ _ASM_EXTABLE(2b, 3b)
: "=a" (err)
: "c" (msr), "0" (low), "d" (high),
- "i" (-EFAULT));
+ "i" (-EFAULT));
return err;
}
@@ -116,23 +116,23 @@
* pointer indirection), this allows gcc to optimize better
*/
-#define rdmsr(msr,val1,val2) \
- do { \
- u64 __val = native_read_msr(msr); \
- (val1) = (u32)__val; \
- (val2) = (u32)(__val >> 32); \
- } while(0)
+#define rdmsr(msr, val1, val2) \
+do { \
+ u64 __val = native_read_msr((msr)); \
+ (val1) = (u32)__val; \
+ (val2) = (u32)(__val >> 32); \
+} while (0)
static inline void wrmsr(unsigned msr, unsigned low, unsigned high)
{
native_write_msr(msr, low, high);
}
-#define rdmsrl(msr,val) \
- ((val) = native_read_msr(msr))
+#define rdmsrl(msr, val) \
+ ((val) = native_read_msr((msr)))
#define wrmsrl(msr, val) \
- native_write_msr(msr, (u32)((u64)(val)), (u32)((u64)(val) >> 32))
+ native_write_msr((msr), (u32)((u64)(val)), (u32)((u64)(val) >> 32))
/* wrmsr with exception handling */
static inline int wrmsr_safe(unsigned msr, unsigned low, unsigned high)
@@ -141,14 +141,22 @@
}
/* rdmsr with exception handling */
-#define rdmsr_safe(msr,p1,p2) \
- ({ \
- int __err; \
- u64 __val = native_read_msr_safe(msr, &__err); \
- (*p1) = (u32)__val; \
- (*p2) = (u32)(__val >> 32); \
- __err; \
- })
+#define rdmsr_safe(msr, p1, p2) \
+({ \
+ int __err; \
+ u64 __val = native_read_msr_safe((msr), &__err); \
+ (*p1) = (u32)__val; \
+ (*p2) = (u32)(__val >> 32); \
+ __err; \
+})
+
+static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
+{
+ int err;
+
+ *p = native_read_msr_safe(msr, &err);
+ return err;
+}
#define rdtscl(low) \
((low) = (u32)native_read_tsc())
@@ -156,35 +164,37 @@
#define rdtscll(val) \
((val) = native_read_tsc())
-#define rdpmc(counter,low,high) \
- do { \
- u64 _l = native_read_pmc(counter); \
- (low) = (u32)_l; \
- (high) = (u32)(_l >> 32); \
- } while(0)
+#define rdpmc(counter, low, high) \
+do { \
+ u64 _l = native_read_pmc((counter)); \
+ (low) = (u32)_l; \
+ (high) = (u32)(_l >> 32); \
+} while (0)
-#define rdtscp(low, high, aux) \
- do { \
- unsigned long long _val = native_read_tscp(&(aux)); \
- (low) = (u32)_val; \
- (high) = (u32)(_val >> 32); \
- } while (0)
+#define rdtscp(low, high, aux) \
+do { \
+ unsigned long long _val = native_read_tscp(&(aux)); \
+ (low) = (u32)_val; \
+ (high) = (u32)(_val >> 32); \
+} while (0)
#define rdtscpll(val, aux) (val) = native_read_tscp(&(aux))
#endif /* !CONFIG_PARAVIRT */
-#define checking_wrmsrl(msr,val) wrmsr_safe(msr,(u32)(val),(u32)((val)>>32))
+#define checking_wrmsrl(msr, val) wrmsr_safe((msr), (u32)(val), \
+ (u32)((val) >> 32))
-#define write_tsc(val1,val2) wrmsr(0x10, val1, val2)
+#define write_tsc(val1, val2) wrmsr(0x10, (val1), (val2))
-#define write_rdtscp_aux(val) wrmsr(0xc0000103, val, 0)
+#define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0)
#ifdef CONFIG_SMP
void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+
int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
#else /* CONFIG_SMP */
static inline void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
@@ -195,7 +205,8 @@
{
wrmsr(msr_no, l, h);
}
-static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
+ u32 *l, u32 *h)
{
return rdmsr_safe(msr_no, l, h);
}
diff --git a/include/asm-x86/mtrr.h b/include/asm-x86/mtrr.h
index 319d065..a69a01a 100644
--- a/include/asm-x86/mtrr.h
+++ b/include/asm-x86/mtrr.h
@@ -28,8 +28,7 @@
#define MTRR_IOCTL_BASE 'M'
-struct mtrr_sentry
-{
+struct mtrr_sentry {
unsigned long base; /* Base address */
unsigned int size; /* Size of region */
unsigned int type; /* Type of region */
@@ -41,8 +40,7 @@
will break. */
#ifdef __i386__
-struct mtrr_gentry
-{
+struct mtrr_gentry {
unsigned int regnum; /* Register number */
unsigned long base; /* Base address */
unsigned int size; /* Size of region */
@@ -51,8 +49,7 @@
#else /* __i386__ */
-struct mtrr_gentry
-{
+struct mtrr_gentry {
unsigned long base; /* Base address */
unsigned int size; /* Size of region */
unsigned int regnum; /* Register number */
@@ -86,38 +83,45 @@
/* The following functions are for use by other drivers */
# ifdef CONFIG_MTRR
+extern u8 mtrr_type_lookup(u64 addr, u64 end);
extern void mtrr_save_fixed_ranges(void *);
extern void mtrr_save_state(void);
-extern int mtrr_add (unsigned long base, unsigned long size,
- unsigned int type, bool increment);
-extern int mtrr_add_page (unsigned long base, unsigned long size,
- unsigned int type, bool increment);
-extern int mtrr_del (int reg, unsigned long base, unsigned long size);
-extern int mtrr_del_page (int reg, unsigned long base, unsigned long size);
+extern int mtrr_add(unsigned long base, unsigned long size,
+ unsigned int type, bool increment);
+extern int mtrr_add_page(unsigned long base, unsigned long size,
+ unsigned int type, bool increment);
+extern int mtrr_del(int reg, unsigned long base, unsigned long size);
+extern int mtrr_del_page(int reg, unsigned long base, unsigned long size);
extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
extern void mtrr_ap_init(void);
extern void mtrr_bp_init(void);
extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
+extern int amd_special_default_mtrr(void);
# else
+static inline u8 mtrr_type_lookup(u64 addr, u64 end)
+{
+ /*
+ * Return no-MTRRs:
+ */
+ return 0xff;
+}
#define mtrr_save_fixed_ranges(arg) do {} while (0)
#define mtrr_save_state() do {} while (0)
-static __inline__ int mtrr_add (unsigned long base, unsigned long size,
+static inline int mtrr_add(unsigned long base, unsigned long size,
+ unsigned int type, bool increment)
+{
+ return -ENODEV;
+}
+static inline int mtrr_add_page(unsigned long base, unsigned long size,
unsigned int type, bool increment)
{
return -ENODEV;
}
-static __inline__ int mtrr_add_page (unsigned long base, unsigned long size,
- unsigned int type, bool increment)
+static inline int mtrr_del(int reg, unsigned long base, unsigned long size)
{
return -ENODEV;
}
-static __inline__ int mtrr_del (int reg, unsigned long base,
- unsigned long size)
-{
- return -ENODEV;
-}
-static __inline__ int mtrr_del_page (int reg, unsigned long base,
- unsigned long size)
+static inline int mtrr_del_page(int reg, unsigned long base, unsigned long size)
{
return -ENODEV;
}
@@ -125,7 +129,9 @@
{
return 0;
}
-static __inline__ void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi) {;}
+static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
+{
+}
#define mtrr_ap_init() do {} while (0)
#define mtrr_bp_init() do {} while (0)
@@ -134,15 +140,13 @@
#ifdef CONFIG_COMPAT
#include <linux/compat.h>
-struct mtrr_sentry32
-{
+struct mtrr_sentry32 {
compat_ulong_t base; /* Base address */
compat_uint_t size; /* Size of region */
compat_uint_t type; /* Type of region */
};
-struct mtrr_gentry32
-{
+struct mtrr_gentry32 {
compat_ulong_t regnum; /* Register number */
compat_uint_t base; /* Base address */
compat_uint_t size; /* Size of region */
@@ -151,16 +155,17 @@
#define MTRR_IOCTL_BASE 'M'
-#define MTRRIOC32_ADD_ENTRY _IOW(MTRR_IOCTL_BASE, 0, struct mtrr_sentry32)
-#define MTRRIOC32_SET_ENTRY _IOW(MTRR_IOCTL_BASE, 1, struct mtrr_sentry32)
-#define MTRRIOC32_DEL_ENTRY _IOW(MTRR_IOCTL_BASE, 2, struct mtrr_sentry32)
-#define MTRRIOC32_GET_ENTRY _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32)
-#define MTRRIOC32_KILL_ENTRY _IOW(MTRR_IOCTL_BASE, 4, struct mtrr_sentry32)
-#define MTRRIOC32_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 5, struct mtrr_sentry32)
-#define MTRRIOC32_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 6, struct mtrr_sentry32)
-#define MTRRIOC32_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 7, struct mtrr_sentry32)
-#define MTRRIOC32_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32)
-#define MTRRIOC32_KILL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry32)
+#define MTRRIOC32_ADD_ENTRY _IOW(MTRR_IOCTL_BASE, 0, struct mtrr_sentry32)
+#define MTRRIOC32_SET_ENTRY _IOW(MTRR_IOCTL_BASE, 1, struct mtrr_sentry32)
+#define MTRRIOC32_DEL_ENTRY _IOW(MTRR_IOCTL_BASE, 2, struct mtrr_sentry32)
+#define MTRRIOC32_GET_ENTRY _IOWR(MTRR_IOCTL_BASE, 3, struct mtrr_gentry32)
+#define MTRRIOC32_KILL_ENTRY _IOW(MTRR_IOCTL_BASE, 4, struct mtrr_sentry32)
+#define MTRRIOC32_ADD_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 5, struct mtrr_sentry32)
+#define MTRRIOC32_SET_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 6, struct mtrr_sentry32)
+#define MTRRIOC32_DEL_PAGE_ENTRY _IOW(MTRR_IOCTL_BASE, 7, struct mtrr_sentry32)
+#define MTRRIOC32_GET_PAGE_ENTRY _IOWR(MTRR_IOCTL_BASE, 8, struct mtrr_gentry32)
+#define MTRRIOC32_KILL_PAGE_ENTRY \
+ _IOW(MTRR_IOCTL_BASE, 9, struct mtrr_sentry32)
#endif /* CONFIG_COMPAT */
#endif /* __KERNEL__ */
diff --git a/include/asm-x86/mutex_32.h b/include/asm-x86/mutex_32.h
index bbeefb9..73e928e 100644
--- a/include/asm-x86/mutex_32.h
+++ b/include/asm-x86/mutex_32.h
@@ -9,7 +9,7 @@
#ifndef _ASM_MUTEX_H
#define _ASM_MUTEX_H
-#include "asm/alternative.h"
+#include <asm/alternative.h>
/**
* __mutex_fastpath_lock - try to take the lock by moving the count
@@ -21,22 +21,20 @@
* wasn't 1 originally. This function MUST leave the value lower than 1
* even when the "1" assertion wasn't true.
*/
-#define __mutex_fastpath_lock(count, fail_fn) \
-do { \
- unsigned int dummy; \
- \
- typecheck(atomic_t *, count); \
+#define __mutex_fastpath_lock(count, fail_fn) \
+do { \
+ unsigned int dummy; \
+ \
+ typecheck(atomic_t *, count); \
typecheck_fn(void (*)(atomic_t *), fail_fn); \
- \
- __asm__ __volatile__( \
- LOCK_PREFIX " decl (%%eax) \n" \
- " jns 1f \n" \
- " call "#fail_fn" \n" \
- "1: \n" \
- \
- :"=a" (dummy) \
- : "a" (count) \
- : "memory", "ecx", "edx"); \
+ \
+ asm volatile(LOCK_PREFIX " decl (%%eax)\n" \
+ " jns 1f \n" \
+ " call " #fail_fn "\n" \
+ "1:\n" \
+ : "=a" (dummy) \
+ : "a" (count) \
+ : "memory", "ecx", "edx"); \
} while (0)
@@ -50,8 +48,8 @@
* wasn't 1 originally. This function returns 0 if the fastpath succeeds,
* or anything the slow path function returns
*/
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+static inline int __mutex_fastpath_lock_retval(atomic_t *count,
+ int (*fail_fn)(atomic_t *))
{
if (unlikely(atomic_dec_return(count) < 0))
return fail_fn(count);
@@ -72,22 +70,20 @@
* __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
* to return 0 otherwise.
*/
-#define __mutex_fastpath_unlock(count, fail_fn) \
-do { \
- unsigned int dummy; \
- \
- typecheck(atomic_t *, count); \
+#define __mutex_fastpath_unlock(count, fail_fn) \
+do { \
+ unsigned int dummy; \
+ \
+ typecheck(atomic_t *, count); \
typecheck_fn(void (*)(atomic_t *), fail_fn); \
- \
- __asm__ __volatile__( \
- LOCK_PREFIX " incl (%%eax) \n" \
- " jg 1f \n" \
- " call "#fail_fn" \n" \
- "1: \n" \
- \
- :"=a" (dummy) \
- : "a" (count) \
- : "memory", "ecx", "edx"); \
+ \
+ asm volatile(LOCK_PREFIX " incl (%%eax)\n" \
+ " jg 1f\n" \
+ " call " #fail_fn "\n" \
+ "1:\n" \
+ : "=a" (dummy) \
+ : "a" (count) \
+ : "memory", "ecx", "edx"); \
} while (0)
#define __mutex_slowpath_needs_to_unlock() 1
@@ -104,8 +100,8 @@
* Additionally, if the value was < 0 originally, this function must not leave
* it to 0 on failure.
*/
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+static inline int __mutex_fastpath_trylock(atomic_t *count,
+ int (*fail_fn)(atomic_t *))
{
/*
* We have two variants here. The cmpxchg based one is the best one
diff --git a/include/asm-x86/mutex_64.h b/include/asm-x86/mutex_64.h
index 6c2949a..f3fae9b 100644
--- a/include/asm-x86/mutex_64.h
+++ b/include/asm-x86/mutex_64.h
@@ -16,23 +16,21 @@
*
* Atomically decrements @v and calls <fail_fn> if the result is negative.
*/
-#define __mutex_fastpath_lock(v, fail_fn) \
-do { \
- unsigned long dummy; \
- \
- typecheck(atomic_t *, v); \
- typecheck_fn(void (*)(atomic_t *), fail_fn); \
- \
- __asm__ __volatile__( \
- LOCK_PREFIX " decl (%%rdi) \n" \
- " jns 1f \n" \
- " call "#fail_fn" \n" \
- "1:" \
- \
- :"=D" (dummy) \
- : "D" (v) \
- : "rax", "rsi", "rdx", "rcx", \
- "r8", "r9", "r10", "r11", "memory"); \
+#define __mutex_fastpath_lock(v, fail_fn) \
+do { \
+ unsigned long dummy; \
+ \
+ typecheck(atomic_t *, v); \
+ typecheck_fn(void (*)(atomic_t *), fail_fn); \
+ \
+ asm volatile(LOCK_PREFIX " decl (%%rdi)\n" \
+ " jns 1f \n" \
+ " call " #fail_fn "\n" \
+ "1:" \
+ : "=D" (dummy) \
+ : "D" (v) \
+ : "rax", "rsi", "rdx", "rcx", \
+ "r8", "r9", "r10", "r11", "memory"); \
} while (0)
/**
@@ -45,9 +43,8 @@
* it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
* or anything the slow path function returns
*/
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count,
- int (*fail_fn)(atomic_t *))
+static inline int __mutex_fastpath_lock_retval(atomic_t *count,
+ int (*fail_fn)(atomic_t *))
{
if (unlikely(atomic_dec_return(count) < 0))
return fail_fn(count);
@@ -62,23 +59,21 @@
*
* Atomically increments @v and calls <fail_fn> if the result is nonpositive.
*/
-#define __mutex_fastpath_unlock(v, fail_fn) \
-do { \
- unsigned long dummy; \
- \
- typecheck(atomic_t *, v); \
- typecheck_fn(void (*)(atomic_t *), fail_fn); \
- \
- __asm__ __volatile__( \
- LOCK_PREFIX " incl (%%rdi) \n" \
- " jg 1f \n" \
- " call "#fail_fn" \n" \
- "1: " \
- \
- :"=D" (dummy) \
- : "D" (v) \
- : "rax", "rsi", "rdx", "rcx", \
- "r8", "r9", "r10", "r11", "memory"); \
+#define __mutex_fastpath_unlock(v, fail_fn) \
+do { \
+ unsigned long dummy; \
+ \
+ typecheck(atomic_t *, v); \
+ typecheck_fn(void (*)(atomic_t *), fail_fn); \
+ \
+ asm volatile(LOCK_PREFIX " incl (%%rdi)\n" \
+ " jg 1f\n" \
+ " call " #fail_fn "\n" \
+ "1:" \
+ : "=D" (dummy) \
+ : "D" (v) \
+ : "rax", "rsi", "rdx", "rcx", \
+ "r8", "r9", "r10", "r11", "memory"); \
} while (0)
#define __mutex_slowpath_needs_to_unlock() 1
@@ -93,8 +88,8 @@
* if it wasn't 1 originally. [the fallback function is never used on
* x86_64, because all x86_64 CPUs have a CMPXCHG instruction.]
*/
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+static inline int __mutex_fastpath_trylock(atomic_t *count,
+ int (*fail_fn)(atomic_t *))
{
if (likely(atomic_cmpxchg(count, 1, 0) == 1))
return 1;
diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h
index 53ccac1..1e36302 100644
--- a/include/asm-x86/nmi.h
+++ b/include/asm-x86/nmi.h
@@ -1,5 +1,93 @@
-#ifdef CONFIG_X86_32
-# include "nmi_32.h"
+#ifndef _ASM_X86_NMI_H_
+#define _ASM_X86_NMI_H_
+
+#include <linux/pm.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#ifdef ARCH_HAS_NMI_WATCHDOG
+
+/**
+ * do_nmi_callback
+ *
+ * Check to see if a callback exists and execute it. Return 1
+ * if the handler exists and was handled successfully.
+ */
+int do_nmi_callback(struct pt_regs *regs, int cpu);
+
+#ifdef CONFIG_PM
+
+/** Replace the PM callback routine for NMI. */
+struct pm_dev *set_nmi_pm_callback(pm_callback callback);
+
+/** Unset the PM callback routine back to the default. */
+void unset_nmi_pm_callback(struct pm_dev *dev);
+
#else
-# include "nmi_64.h"
+
+static inline struct pm_dev *set_nmi_pm_callback(pm_callback callback)
+{
+ return 0;
+}
+
+static inline void unset_nmi_pm_callback(struct pm_dev *dev)
+{
+}
+
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_X86_64
+extern void default_do_nmi(struct pt_regs *);
+extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
+extern void nmi_watchdog_default(void);
+#else
+#define nmi_watchdog_default() do {} while (0)
+#endif
+
+extern int check_nmi_watchdog(void);
+extern int nmi_watchdog_enabled;
+extern int unknown_nmi_panic;
+extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
+extern int avail_to_resrv_perfctr_nmi(unsigned int);
+extern int reserve_perfctr_nmi(unsigned int);
+extern void release_perfctr_nmi(unsigned int);
+extern int reserve_evntsel_nmi(unsigned int);
+extern void release_evntsel_nmi(unsigned int);
+
+extern void setup_apic_nmi_watchdog(void *);
+extern void stop_apic_nmi_watchdog(void *);
+extern void disable_timer_nmi_watchdog(void);
+extern void enable_timer_nmi_watchdog(void);
+extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
+
+extern atomic_t nmi_active;
+extern unsigned int nmi_watchdog;
+#define NMI_DISABLED -1
+#define NMI_NONE 0
+#define NMI_IO_APIC 1
+#define NMI_LOCAL_APIC 2
+#define NMI_INVALID 3
+#define NMI_DEFAULT NMI_DISABLED
+
+struct ctl_table;
+struct file;
+extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
+ void __user *, size_t *, loff_t *);
+extern int unknown_nmi_panic;
+
+void __trigger_all_cpu_backtrace(void);
+#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+
+#endif
+
+void lapic_watchdog_stop(void);
+int lapic_watchdog_init(unsigned nmi_hz);
+int lapic_wd_event(unsigned nmi_hz);
+unsigned lapic_adjust_nmi_hz(unsigned hz);
+int lapic_watchdog_ok(void);
+void disable_lapic_nmi_watchdog(void);
+void enable_lapic_nmi_watchdog(void);
+void stop_nmi(void);
+void restart_nmi(void);
+
#endif
diff --git a/include/asm-x86/nmi_32.h b/include/asm-x86/nmi_32.h
deleted file mode 100644
index 7206c7e..0000000
--- a/include/asm-x86/nmi_32.h
+++ /dev/null
@@ -1,61 +0,0 @@
-#ifndef ASM_NMI_H
-#define ASM_NMI_H
-
-#include <linux/pm.h>
-#include <asm/irq.h>
-
-#ifdef ARCH_HAS_NMI_WATCHDOG
-
-/**
- * do_nmi_callback
- *
- * Check to see if a callback exists and execute it. Return 1
- * if the handler exists and was handled successfully.
- */
-int do_nmi_callback(struct pt_regs *regs, int cpu);
-
-extern int nmi_watchdog_enabled;
-extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
-extern int avail_to_resrv_perfctr_nmi(unsigned int);
-extern int reserve_perfctr_nmi(unsigned int);
-extern void release_perfctr_nmi(unsigned int);
-extern int reserve_evntsel_nmi(unsigned int);
-extern void release_evntsel_nmi(unsigned int);
-
-extern void setup_apic_nmi_watchdog (void *);
-extern void stop_apic_nmi_watchdog (void *);
-extern void disable_timer_nmi_watchdog(void);
-extern void enable_timer_nmi_watchdog(void);
-extern int nmi_watchdog_tick (struct pt_regs * regs, unsigned reason);
-
-extern atomic_t nmi_active;
-extern unsigned int nmi_watchdog;
-#define NMI_DISABLED -1
-#define NMI_NONE 0
-#define NMI_IO_APIC 1
-#define NMI_LOCAL_APIC 2
-#define NMI_INVALID 3
-#define NMI_DEFAULT NMI_DISABLED
-
-struct ctl_table;
-struct file;
-extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
- void __user *, size_t *, loff_t *);
-extern int unknown_nmi_panic;
-
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
-
-#endif
-
-void lapic_watchdog_stop(void);
-int lapic_watchdog_init(unsigned nmi_hz);
-int lapic_wd_event(unsigned nmi_hz);
-unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
-void disable_lapic_nmi_watchdog(void);
-void enable_lapic_nmi_watchdog(void);
-void stop_nmi(void);
-void restart_nmi(void);
-
-#endif /* ASM_NMI_H */
diff --git a/include/asm-x86/nmi_64.h b/include/asm-x86/nmi_64.h
deleted file mode 100644
index 2eeb74e..0000000
--- a/include/asm-x86/nmi_64.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef ASM_NMI_H
-#define ASM_NMI_H
-
-#include <linux/pm.h>
-#include <asm/io.h>
-
-/**
- * do_nmi_callback
- *
- * Check to see if a callback exists and execute it. Return 1
- * if the handler exists and was handled successfully.
- */
-int do_nmi_callback(struct pt_regs *regs, int cpu);
-
-#ifdef CONFIG_PM
-
-/** Replace the PM callback routine for NMI. */
-struct pm_dev * set_nmi_pm_callback(pm_callback callback);
-
-/** Unset the PM callback routine back to the default. */
-void unset_nmi_pm_callback(struct pm_dev * dev);
-
-#else
-
-static inline struct pm_dev * set_nmi_pm_callback(pm_callback callback)
-{
- return 0;
-}
-
-static inline void unset_nmi_pm_callback(struct pm_dev * dev)
-{
-}
-
-#endif /* CONFIG_PM */
-
-extern void default_do_nmi(struct pt_regs *);
-extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
-
-#define get_nmi_reason() inb(0x61)
-
-extern int unknown_nmi_panic;
-extern int nmi_watchdog_enabled;
-
-extern int check_nmi_watchdog(void);
-extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
-extern int avail_to_resrv_perfctr_nmi(unsigned int);
-extern int reserve_perfctr_nmi(unsigned int);
-extern void release_perfctr_nmi(unsigned int);
-extern int reserve_evntsel_nmi(unsigned int);
-extern void release_evntsel_nmi(unsigned int);
-
-extern void setup_apic_nmi_watchdog (void *);
-extern void stop_apic_nmi_watchdog (void *);
-extern void disable_timer_nmi_watchdog(void);
-extern void enable_timer_nmi_watchdog(void);
-extern int nmi_watchdog_tick (struct pt_regs * regs, unsigned reason);
-
-extern void nmi_watchdog_default(void);
-
-extern atomic_t nmi_active;
-extern unsigned int nmi_watchdog;
-#define NMI_DISABLED -1
-#define NMI_NONE 0
-#define NMI_IO_APIC 1
-#define NMI_LOCAL_APIC 2
-#define NMI_INVALID 3
-#define NMI_DEFAULT NMI_DISABLED
-
-struct ctl_table;
-struct file;
-extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
- void __user *, size_t *, loff_t *);
-
-extern int unknown_nmi_panic;
-
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
-
-
-void lapic_watchdog_stop(void);
-int lapic_watchdog_init(unsigned nmi_hz);
-int lapic_wd_event(unsigned nmi_hz);
-unsigned lapic_adjust_nmi_hz(unsigned hz);
-int lapic_watchdog_ok(void);
-void disable_lapic_nmi_watchdog(void);
-void enable_lapic_nmi_watchdog(void);
-void stop_nmi(void);
-void restart_nmi(void);
-
-#endif /* ASM_NMI_H */
diff --git a/include/asm-x86/nops.h b/include/asm-x86/nops.h
index e3b2bce..ad0bedd 100644
--- a/include/asm-x86/nops.h
+++ b/include/asm-x86/nops.h
@@ -5,6 +5,8 @@
/* generic versions from gas
1: nop
+ the following instructions are NOT nops in 64-bit mode,
+ for 64-bit mode use K8 or P6 nops instead
2: movl %esi,%esi
3: leal 0x00(%esi),%esi
4: leal 0x00(,%esi,1),%esi
@@ -73,16 +75,7 @@
#define P6_NOP7 ".byte 0x0f,0x1f,0x80,0,0,0,0\n"
#define P6_NOP8 ".byte 0x0f,0x1f,0x84,0x00,0,0,0,0\n"
-#if defined(CONFIG_MK8)
-#define ASM_NOP1 K8_NOP1
-#define ASM_NOP2 K8_NOP2
-#define ASM_NOP3 K8_NOP3
-#define ASM_NOP4 K8_NOP4
-#define ASM_NOP5 K8_NOP5
-#define ASM_NOP6 K8_NOP6
-#define ASM_NOP7 K8_NOP7
-#define ASM_NOP8 K8_NOP8
-#elif defined(CONFIG_MK7)
+#if defined(CONFIG_MK7)
#define ASM_NOP1 K7_NOP1
#define ASM_NOP2 K7_NOP2
#define ASM_NOP3 K7_NOP3
@@ -100,6 +93,15 @@
#define ASM_NOP6 P6_NOP6
#define ASM_NOP7 P6_NOP7
#define ASM_NOP8 P6_NOP8
+#elif defined(CONFIG_X86_64)
+#define ASM_NOP1 K8_NOP1
+#define ASM_NOP2 K8_NOP2
+#define ASM_NOP3 K8_NOP3
+#define ASM_NOP4 K8_NOP4
+#define ASM_NOP5 K8_NOP5
+#define ASM_NOP6 K8_NOP6
+#define ASM_NOP7 K8_NOP7
+#define ASM_NOP8 K8_NOP8
#else
#define ASM_NOP1 GENERIC_NOP1
#define ASM_NOP2 GENERIC_NOP2
diff --git a/include/asm-x86/numa_64.h b/include/asm-x86/numa_64.h
index 15fe07c..32c22ae 100644
--- a/include/asm-x86/numa_64.h
+++ b/include/asm-x86/numa_64.h
@@ -1,11 +1,12 @@
-#ifndef _ASM_X8664_NUMA_H
+#ifndef _ASM_X8664_NUMA_H
#define _ASM_X8664_NUMA_H 1
#include <linux/nodemask.h>
#include <asm/apicdef.h>
struct bootnode {
- u64 start,end;
+ u64 start;
+ u64 end;
};
extern int compute_hash_shift(struct bootnode *nodes, int numnodes);
diff --git a/include/asm-x86/numaq.h b/include/asm-x86/numaq.h
index 38f710d..94b86c3 100644
--- a/include/asm-x86/numaq.h
+++ b/include/asm-x86/numaq.h
@@ -3,7 +3,7 @@
*
* Copyright (C) 2002, IBM Corp.
*
- * All rights reserved.
+ * All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -33,7 +33,8 @@
/*
* SYS_CFG_DATA_PRIV_ADDR, struct eachquadmem, and struct sys_cfg_data are the
*/
-#define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private quad space */
+#define SYS_CFG_DATA_PRIV_ADDR 0x0009d000 /* place for scd in private
+ quad space */
/*
* Communication area for each processor on lynxer-processor tests.
@@ -139,7 +140,7 @@
unsigned int low_shrd_mem_base; /* 0 or 512MB or 1GB */
unsigned int low_shrd_mem_quad_offset; /* 0,128M,256M,512M,1G */
/* may not be totally populated */
- unsigned int split_mem_enbl; /* 0 for no low shared memory */
+ unsigned int split_mem_enbl; /* 0 for no low shared memory */
unsigned int mmio_sz; /* Size of total system memory mapped I/O */
/* (in MB). */
unsigned int quad_spin_lock; /* Spare location used for quad */
@@ -152,7 +153,7 @@
/*
* memory configuration area for each quad
*/
- struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */
+ struct eachquadmem eq[MAX_NUMNODES]; /* indexed by quad id */
};
static inline unsigned long *get_zholes_size(int nid)
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index a05b289..6724a4b 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -33,10 +33,8 @@
#ifdef CONFIG_X86_64
#include <asm/page_64.h>
-#define max_pfn_mapped end_pfn_map
#else
#include <asm/page_32.h>
-#define max_pfn_mapped max_low_pfn
#endif /* CONFIG_X86_64 */
#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET)
@@ -50,6 +48,8 @@
extern int page_is_ram(unsigned long pagenr);
+extern unsigned long max_pfn_mapped;
+
struct page;
static inline void clear_user_page(void *page, unsigned long vaddr,
diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h
index 5f7257f..424e82f 100644
--- a/include/asm-x86/page_32.h
+++ b/include/asm-x86/page_32.h
@@ -47,7 +47,10 @@
typedef unsigned long pgprotval_t;
typedef unsigned long phys_addr_t;
-typedef union { pteval_t pte, pte_low; } pte_t;
+typedef union {
+ pteval_t pte;
+ pteval_t pte_low;
+} pte_t;
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_X86_PAE */
@@ -61,7 +64,7 @@
#endif
#ifndef __ASSEMBLY__
-#define __phys_addr(x) ((x)-PAGE_OFFSET)
+#define __phys_addr(x) ((x) - PAGE_OFFSET)
#define __phys_reloc_hide(x) RELOC_HIDE((x), 0)
#ifdef CONFIG_FLATMEM
@@ -78,7 +81,7 @@
extern int sysctl_legacy_va_layout;
#define VMALLOC_RESERVE ((unsigned long)__VMALLOC_RESERVE)
-#define MAXMEM (-__PAGE_OFFSET-__VMALLOC_RESERVE)
+#define MAXMEM (-__PAGE_OFFSET - __VMALLOC_RESERVE)
#ifdef CONFIG_X86_USE_3DNOW
#include <asm/mmx.h>
diff --git a/include/asm-x86/page_64.h b/include/asm-x86/page_64.h
index 1435460..6ea7285 100644
--- a/include/asm-x86/page_64.h
+++ b/include/asm-x86/page_64.h
@@ -5,7 +5,7 @@
#define THREAD_ORDER 1
#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
-#define CURRENT_MASK (~(THREAD_SIZE-1))
+#define CURRENT_MASK (~(THREAD_SIZE - 1))
#define EXCEPTION_STACK_ORDER 0
#define EXCEPTION_STKSZ (PAGE_SIZE << EXCEPTION_STACK_ORDER)
@@ -48,10 +48,10 @@
#define __VIRTUAL_MASK_SHIFT 48
/*
- * Kernel image size is limited to 128 MB (see level2_kernel_pgt in
+ * Kernel image size is limited to 512 MB (see level2_kernel_pgt in
* arch/x86/kernel/head_64.S), and it is mapped here:
*/
-#define KERNEL_IMAGE_SIZE (128*1024*1024)
+#define KERNEL_IMAGE_SIZE (512 * 1024 * 1024)
#define KERNEL_IMAGE_START _AC(0xffffffff80000000, UL)
#ifndef __ASSEMBLY__
@@ -59,7 +59,6 @@
void copy_page(void *to, void *from);
extern unsigned long end_pfn;
-extern unsigned long end_pfn_map;
extern unsigned long phys_base;
extern unsigned long __phys_addr(unsigned long);
@@ -81,6 +80,9 @@
#define vmemmap ((struct page *)VMEMMAP_START)
+extern unsigned long init_memory_mapping(unsigned long start,
+ unsigned long end);
+
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_FLATMEM
diff --git a/include/asm-x86/param.h b/include/asm-x86/param.h
index c996ec4..6f0d042 100644
--- a/include/asm-x86/param.h
+++ b/include/asm-x86/param.h
@@ -3,8 +3,8 @@
#ifdef __KERNEL__
# define HZ CONFIG_HZ /* Internal kernel timer frequency */
-# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
+# define USER_HZ 100 /* some user interfaces are */
+# define CLOCKS_PER_SEC (USER_HZ) /* in "ticks" like times() */
#endif
#ifndef HZ
diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h
index d6236eb..3d41939 100644
--- a/include/asm-x86/paravirt.h
+++ b/include/asm-x86/paravirt.h
@@ -231,7 +231,8 @@
void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval);
void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
- void (*pte_update)(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+ void (*pte_update)(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep);
void (*pte_update_defer)(struct mm_struct *mm,
unsigned long addr, pte_t *ptep);
@@ -246,7 +247,8 @@
void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
void (*set_pte_present)(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte);
- void (*pte_clear)(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+ void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep);
void (*pmd_clear)(pmd_t *pmdp);
#endif /* CONFIG_X86_PAE */
@@ -274,8 +276,7 @@
/* This contains all the paravirt structures: we get a convenient
* number for each function using the offset which we use to indicate
* what to patch. */
-struct paravirt_patch_template
-{
+struct paravirt_patch_template {
struct pv_init_ops pv_init_ops;
struct pv_time_ops pv_time_ops;
struct pv_cpu_ops pv_cpu_ops;
@@ -660,43 +661,56 @@
}
/* These should all do BUG_ON(_err), but our headers are too tangled. */
-#define rdmsr(msr,val1,val2) do { \
+#define rdmsr(msr, val1, val2) \
+do { \
int _err; \
u64 _l = paravirt_read_msr(msr, &_err); \
val1 = (u32)_l; \
val2 = _l >> 32; \
-} while(0)
+} while (0)
-#define wrmsr(msr,val1,val2) do { \
+#define wrmsr(msr, val1, val2) \
+do { \
paravirt_write_msr(msr, val1, val2); \
-} while(0)
+} while (0)
-#define rdmsrl(msr,val) do { \
+#define rdmsrl(msr, val) \
+do { \
int _err; \
val = paravirt_read_msr(msr, &_err); \
-} while(0)
+} while (0)
-#define wrmsrl(msr,val) wrmsr(msr, (u32)((u64)(val)), ((u64)(val))>>32)
-#define wrmsr_safe(msr,a,b) paravirt_write_msr(msr, a, b)
+#define wrmsrl(msr, val) wrmsr(msr, (u32)((u64)(val)), ((u64)(val))>>32)
+#define wrmsr_safe(msr, a, b) paravirt_write_msr(msr, a, b)
/* rdmsr with exception handling */
-#define rdmsr_safe(msr,a,b) ({ \
+#define rdmsr_safe(msr, a, b) \
+({ \
int _err; \
u64 _l = paravirt_read_msr(msr, &_err); \
(*a) = (u32)_l; \
(*b) = _l >> 32; \
- _err; })
+ _err; \
+})
+static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
+{
+ int err;
+
+ *p = paravirt_read_msr(msr, &err);
+ return err;
+}
static inline u64 paravirt_read_tsc(void)
{
return PVOP_CALL0(u64, pv_cpu_ops.read_tsc);
}
-#define rdtscl(low) do { \
+#define rdtscl(low) \
+do { \
u64 _l = paravirt_read_tsc(); \
low = (int)_l; \
-} while(0)
+} while (0)
#define rdtscll(val) (val = paravirt_read_tsc())
@@ -711,11 +725,12 @@
return PVOP_CALL1(u64, pv_cpu_ops.read_pmc, counter);
}
-#define rdpmc(counter,low,high) do { \
+#define rdpmc(counter, low, high) \
+do { \
u64 _l = paravirt_read_pmc(counter); \
low = (u32)_l; \
high = _l >> 32; \
-} while(0)
+} while (0)
static inline unsigned long long paravirt_rdtscp(unsigned int *aux)
{
@@ -794,7 +809,8 @@
}
/* The paravirtualized I/O functions */
-static inline void slow_down_io(void) {
+static inline void slow_down_io(void)
+{
pv_cpu_ops.io_delay();
#ifdef REALLY_SLOW_IO
pv_cpu_ops.io_delay();
diff --git a/include/asm-x86/parport.h b/include/asm-x86/parport.h
index 019cbca..3c4ffeb 100644
--- a/include/asm-x86/parport.h
+++ b/include/asm-x86/parport.h
@@ -1,10 +1,10 @@
#ifndef _ASM_X86_PARPORT_H
#define _ASM_X86_PARPORT_H
-static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
-static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
{
- return parport_pc_find_isa_ports (autoirq, autodma);
+ return parport_pc_find_isa_ports(autoirq, autodma);
}
#endif /* _ASM_X86_PARPORT_H */
diff --git a/include/asm-x86/pat.h b/include/asm-x86/pat.h
new file mode 100644
index 0000000..8b822b5
--- /dev/null
+++ b/include/asm-x86/pat.h
@@ -0,0 +1,16 @@
+
+#ifndef _ASM_PAT_H
+#define _ASM_PAT_H 1
+
+#include <linux/types.h>
+
+extern int pat_wc_enabled;
+
+extern void pat_init(void);
+
+extern int reserve_memtype(u64 start, u64 end,
+ unsigned long req_type, unsigned long *ret_type);
+extern int free_memtype(u64 start, u64 end);
+
+#endif
+
diff --git a/include/asm-x86/pci-direct.h b/include/asm-x86/pci-direct.h
index 6823fa4..5b21485 100644
--- a/include/asm-x86/pci-direct.h
+++ b/include/asm-x86/pci-direct.h
@@ -4,7 +4,7 @@
#include <linux/types.h>
/* Direct PCI access. This is used for PCI accesses in early boot before
- the PCI subsystem works. */
+ the PCI subsystem works. */
extern u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset);
extern u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset);
diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h
index c61190c..ddd8e24 100644
--- a/include/asm-x86/pci.h
+++ b/include/asm-x86/pci.h
@@ -8,14 +8,13 @@
#include <asm/scatterlist.h>
#include <asm/io.h>
-
#ifdef __KERNEL__
struct pci_sysdata {
int domain; /* PCI domain */
int node; /* NUMA node */
#ifdef CONFIG_X86_64
- void* iommu; /* IOMMU private data */
+ void *iommu; /* IOMMU private data */
#endif
};
@@ -52,7 +51,7 @@
#define PCIBIOS_MIN_CARDBUS_IO 0x4000
void pcibios_config_init(void);
-struct pci_bus * pcibios_scan_root(int bus);
+struct pci_bus *pcibios_scan_root(int bus);
void pcibios_set_master(struct pci_dev *dev);
void pcibios_penalize_isa_irq(int irq, int active);
@@ -62,7 +61,8 @@
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine);
+ enum pci_mmap_state mmap_state,
+ int write_combine);
#ifdef CONFIG_PCI
diff --git a/include/asm-x86/pci_64.h b/include/asm-x86/pci_64.h
index 3746903..df867e5 100644
--- a/include/asm-x86/pci_64.h
+++ b/include/asm-x86/pci_64.h
@@ -1,12 +1,10 @@
#ifndef __x8664_PCI_H
#define __x8664_PCI_H
-
#ifdef __KERNEL__
-
#ifdef CONFIG_CALGARY_IOMMU
-static inline void* pci_iommu(struct pci_bus *bus)
+static inline void *pci_iommu(struct pci_bus *bus)
{
struct pci_sysdata *sd = bus->sysdata;
return sd->iommu;
@@ -19,11 +17,10 @@
}
#endif /* CONFIG_CALGARY_IOMMU */
-
-extern int (*pci_config_read)(int seg, int bus, int dev, int fn, int reg, int len, u32 *value);
-extern int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int len, u32 value);
-
-
+extern int (*pci_config_read)(int seg, int bus, int dev, int fn,
+ int reg, int len, u32 *value);
+extern int (*pci_config_write)(int seg, int bus, int dev, int fn,
+ int reg, int len, u32 value);
extern void pci_iommu_alloc(void);
@@ -65,5 +62,4 @@
#endif /* __KERNEL__ */
-
#endif /* __x8664_PCI_H */
diff --git a/include/asm-x86/pda.h b/include/asm-x86/pda.h
index c0305bf..101fb9e 100644
--- a/include/asm-x86/pda.h
+++ b/include/asm-x86/pda.h
@@ -22,7 +22,6 @@
offset 40!!! */
#endif
char *irqstackptr;
- unsigned int nodenumber; /* number of current node */
unsigned int __softirq_pending;
unsigned int __nmi_count; /* number of NMI on this CPUs */
short mmu_state;
@@ -58,34 +57,36 @@
#define pda_offset(field) offsetof(struct x8664_pda, field)
-#define pda_to_op(op, field, val) do { \
- typedef typeof(_proxy_pda.field) T__; \
- if (0) { T__ tmp__; tmp__ = (val); } /* type checking */ \
- switch (sizeof(_proxy_pda.field)) { \
- case 2: \
- asm(op "w %1,%%gs:%c2" : \
- "+m" (_proxy_pda.field) : \
- "ri" ((T__)val), \
- "i"(pda_offset(field))); \
- break; \
- case 4: \
- asm(op "l %1,%%gs:%c2" : \
- "+m" (_proxy_pda.field) : \
- "ri" ((T__)val), \
- "i" (pda_offset(field))); \
- break; \
- case 8: \
- asm(op "q %1,%%gs:%c2": \
- "+m" (_proxy_pda.field) : \
- "ri" ((T__)val), \
- "i"(pda_offset(field))); \
- break; \
- default: \
- __bad_pda_field(); \
- } \
- } while (0)
+#define pda_to_op(op, field, val) \
+do { \
+ typedef typeof(_proxy_pda.field) T__; \
+ if (0) { T__ tmp__; tmp__ = (val); } /* type checking */ \
+ switch (sizeof(_proxy_pda.field)) { \
+ case 2: \
+ asm(op "w %1,%%gs:%c2" : \
+ "+m" (_proxy_pda.field) : \
+ "ri" ((T__)val), \
+ "i"(pda_offset(field))); \
+ break; \
+ case 4: \
+ asm(op "l %1,%%gs:%c2" : \
+ "+m" (_proxy_pda.field) : \
+ "ri" ((T__)val), \
+ "i" (pda_offset(field))); \
+ break; \
+ case 8: \
+ asm(op "q %1,%%gs:%c2": \
+ "+m" (_proxy_pda.field) : \
+ "ri" ((T__)val), \
+ "i"(pda_offset(field))); \
+ break; \
+ default: \
+ __bad_pda_field(); \
+ } \
+} while (0)
-#define pda_from_op(op,field) ({ \
+#define pda_from_op(op, field) \
+({ \
typeof(_proxy_pda.field) ret__; \
switch (sizeof(_proxy_pda.field)) { \
case 2: \
@@ -93,23 +94,24 @@
"=r" (ret__) : \
"i" (pda_offset(field)), \
"m" (_proxy_pda.field)); \
- break; \
+ break; \
case 4: \
asm(op "l %%gs:%c1,%0": \
"=r" (ret__): \
"i" (pda_offset(field)), \
"m" (_proxy_pda.field)); \
- break; \
+ break; \
case 8: \
asm(op "q %%gs:%c1,%0": \
"=r" (ret__) : \
"i" (pda_offset(field)), \
"m" (_proxy_pda.field)); \
- break; \
+ break; \
default: \
__bad_pda_field(); \
- } \
- ret__; })
+ } \
+ ret__; \
+})
#define read_pda(field) pda_from_op("mov", field)
#define write_pda(field, val) pda_to_op("mov", field, val)
@@ -118,12 +120,13 @@
#define or_pda(field, val) pda_to_op("or", field, val)
/* This is not atomic against other CPUs -- CPU preemption needs to be off */
-#define test_and_clear_bit_pda(bit, field) ({ \
- int old__; \
- asm volatile("btr %2,%%gs:%c3\n\tsbbl %0,%0" \
- : "=r" (old__), "+m" (_proxy_pda.field) \
- : "dIr" (bit), "i" (pda_offset(field)) : "memory"); \
- old__; \
+#define test_and_clear_bit_pda(bit, field) \
+({ \
+ int old__; \
+ asm volatile("btr %2,%%gs:%c3\n\tsbbl %0,%0" \
+ : "=r" (old__), "+m" (_proxy_pda.field) \
+ : "dIr" (bit), "i" (pda_offset(field)) : "memory");\
+ old__; \
})
#endif
diff --git a/include/asm-x86/percpu.h b/include/asm-x86/percpu.h
index 0dec00f..736fc3b 100644
--- a/include/asm-x86/percpu.h
+++ b/include/asm-x86/percpu.h
@@ -85,58 +85,62 @@
* don't give an lvalue though). */
extern void __bad_percpu_size(void);
-#define percpu_to_op(op,var,val) \
- do { \
- typedef typeof(var) T__; \
- if (0) { T__ tmp__; tmp__ = (val); } \
- switch (sizeof(var)) { \
- case 1: \
- asm(op "b %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- case 2: \
- asm(op "w %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- case 4: \
- asm(op "l %1,"__percpu_seg"%0" \
- : "+m" (var) \
- :"ri" ((T__)val)); \
- break; \
- default: __bad_percpu_size(); \
- } \
- } while (0)
+#define percpu_to_op(op, var, val) \
+do { \
+ typedef typeof(var) T__; \
+ if (0) { \
+ T__ tmp__; \
+ tmp__ = (val); \
+ } \
+ switch (sizeof(var)) { \
+ case 1: \
+ asm(op "b %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ : "ri" ((T__)val)); \
+ break; \
+ case 2: \
+ asm(op "w %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ : "ri" ((T__)val)); \
+ break; \
+ case 4: \
+ asm(op "l %1,"__percpu_seg"%0" \
+ : "+m" (var) \
+ : "ri" ((T__)val)); \
+ break; \
+ default: __bad_percpu_size(); \
+ } \
+} while (0)
-#define percpu_from_op(op,var) \
- ({ \
- typeof(var) ret__; \
- switch (sizeof(var)) { \
- case 1: \
- asm(op "b "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- case 2: \
- asm(op "w "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- case 4: \
- asm(op "l "__percpu_seg"%1,%0" \
- : "=r" (ret__) \
- : "m" (var)); \
- break; \
- default: __bad_percpu_size(); \
- } \
- ret__; })
+#define percpu_from_op(op, var) \
+({ \
+ typeof(var) ret__; \
+ switch (sizeof(var)) { \
+ case 1: \
+ asm(op "b "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ case 2: \
+ asm(op "w "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ case 4: \
+ asm(op "l "__percpu_seg"%1,%0" \
+ : "=r" (ret__) \
+ : "m" (var)); \
+ break; \
+ default: __bad_percpu_size(); \
+ } \
+ ret__; \
+})
#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var)
-#define x86_write_percpu(var,val) percpu_to_op("mov", per_cpu__##var, val)
-#define x86_add_percpu(var,val) percpu_to_op("add", per_cpu__##var, val)
-#define x86_sub_percpu(var,val) percpu_to_op("sub", per_cpu__##var, val)
-#define x86_or_percpu(var,val) percpu_to_op("or", per_cpu__##var, val)
+#define x86_write_percpu(var, val) percpu_to_op("mov", per_cpu__##var, val)
+#define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val)
+#define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val)
+#define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val)
#endif /* !__ASSEMBLY__ */
#endif /* !CONFIG_X86_64 */
#endif /* _ASM_X86_PERCPU_H_ */
diff --git a/include/asm-x86/pgtable-2level.h b/include/asm-x86/pgtable-2level.h
index 701404f..46bc52c 100644
--- a/include/asm-x86/pgtable-2level.h
+++ b/include/asm-x86/pgtable-2level.h
@@ -26,7 +26,8 @@
native_set_pte(ptep, pte);
}
-static inline void native_set_pte_present(struct mm_struct *mm, unsigned long addr,
+static inline void native_set_pte_present(struct mm_struct *mm,
+ unsigned long addr,
pte_t *ptep, pte_t pte)
{
native_set_pte(ptep, pte);
@@ -37,7 +38,8 @@
native_set_pmd(pmdp, __pmd(0));
}
-static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *xp)
+static inline void native_pte_clear(struct mm_struct *mm,
+ unsigned long addr, pte_t *xp)
{
*xp = native_make_pte(0);
}
@@ -61,16 +63,18 @@
*/
#define PTE_FILE_MAX_BITS 29
-#define pte_to_pgoff(pte) \
- ((((pte).pte_low >> 1) & 0x1f ) + (((pte).pte_low >> 8) << 5 ))
+#define pte_to_pgoff(pte) \
+ ((((pte).pte_low >> 1) & 0x1f) + (((pte).pte_low >> 8) << 5))
-#define pgoff_to_pte(off) \
- ((pte_t) { .pte_low = (((off) & 0x1f) << 1) + (((off) >> 5) << 8) + _PAGE_FILE })
+#define pgoff_to_pte(off) \
+ ((pte_t) { .pte_low = (((off) & 0x1f) << 1) + \
+ (((off) >> 5) << 8) + _PAGE_FILE })
/* Encode and de-code a swap entry */
#define __swp_type(x) (((x).val >> 1) & 0x1f)
#define __swp_offset(x) ((x).val >> 8)
-#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 1) | ((offset) << 8) })
+#define __swp_entry(type, offset) \
+ ((swp_entry_t) { ((type) << 1) | ((offset) << 8) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_low })
#define __swp_entry_to_pte(x) ((pte_t) { .pte = (x).val })
diff --git a/include/asm-x86/pgtable-3level.h b/include/asm-x86/pgtable-3level.h
index 1d763ee..8b4a9d4 100644
--- a/include/asm-x86/pgtable-3level.h
+++ b/include/asm-x86/pgtable-3level.h
@@ -8,22 +8,26 @@
* Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
*/
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %p(%016Lx).\n", __FILE__, __LINE__, &(e), pmd_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %p(%016Lx).\n", __FILE__, __LINE__, &(e), pgd_val(e))
-
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %p(%08lx%08lx).\n", \
+ __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %p(%016Lx).\n", \
+ __FILE__, __LINE__, &(e), pmd_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %p(%016Lx).\n", \
+ __FILE__, __LINE__, &(e), pgd_val(e))
static inline int pud_none(pud_t pud)
{
return pud_val(pud) == 0;
}
+
static inline int pud_bad(pud_t pud)
{
return (pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER)) != 0;
}
+
static inline int pud_present(pud_t pud)
{
return pud_val(pud) & _PAGE_PRESENT;
@@ -48,7 +52,8 @@
* we are justified in merely clearing the PTE present bit, followed
* by a set. The ordering here is important.
*/
-static inline void native_set_pte_present(struct mm_struct *mm, unsigned long addr,
+static inline void native_set_pte_present(struct mm_struct *mm,
+ unsigned long addr,
pte_t *ptep, pte_t pte)
{
ptep->pte_low = 0;
@@ -60,15 +65,17 @@
static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
{
- set_64bit((unsigned long long *)(ptep),native_pte_val(pte));
+ set_64bit((unsigned long long *)(ptep), native_pte_val(pte));
}
+
static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
{
- set_64bit((unsigned long long *)(pmdp),native_pmd_val(pmd));
+ set_64bit((unsigned long long *)(pmdp), native_pmd_val(pmd));
}
+
static inline void native_set_pud(pud_t *pudp, pud_t pud)
{
- set_64bit((unsigned long long *)(pudp),native_pud_val(pud));
+ set_64bit((unsigned long long *)(pudp), native_pud_val(pud));
}
/*
@@ -76,7 +83,8 @@
* entry, so clear the bottom half first and enforce ordering with a compiler
* barrier.
*/
-static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
{
ptep->pte_low = 0;
smp_wmb();
@@ -107,20 +115,19 @@
* current pgd to avoid unnecessary TLB flushes.
*/
pgd = read_cr3();
- if (__pa(pudp) >= pgd && __pa(pudp) < (pgd + sizeof(pgd_t)*PTRS_PER_PGD))
+ if (__pa(pudp) >= pgd && __pa(pudp) <
+ (pgd + sizeof(pgd_t)*PTRS_PER_PGD))
write_cr3(pgd);
}
-#define pud_page(pud) \
-((struct page *) __va(pud_val(pud) & PAGE_MASK))
+#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PAGE_MASK))
-#define pud_page_vaddr(pud) \
-((unsigned long) __va(pud_val(pud) & PAGE_MASK))
+#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PAGE_MASK))
/* Find an entry in the second-level page table.. */
-#define pmd_offset(pud, address) ((pmd_t *) pud_page(*(pud)) + \
- pmd_index(address))
+#define pmd_offset(pud, address) ((pmd_t *)pud_page(*(pud)) + \
+ pmd_index(address))
#ifdef CONFIG_SMP
static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
@@ -161,7 +168,8 @@
* put the 32 bits of offset into the high part.
*/
#define pte_to_pgoff(pte) ((pte).pte_high)
-#define pgoff_to_pte(off) ((pte_t) { { .pte_low = _PAGE_FILE, .pte_high = (off) } })
+#define pgoff_to_pte(off) \
+ ((pte_t) { { .pte_low = _PAGE_FILE, .pte_high = (off) } })
#define PTE_FILE_MAX_BITS 32
/* Encode and de-code a swap entry */
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 9cf472a..f1d9f4a 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -4,13 +4,13 @@
#define USER_PTRS_PER_PGD ((TASK_SIZE-1)/PGDIR_SIZE+1)
#define FIRST_USER_ADDRESS 0
-#define _PAGE_BIT_PRESENT 0
-#define _PAGE_BIT_RW 1
-#define _PAGE_BIT_USER 2
-#define _PAGE_BIT_PWT 3
-#define _PAGE_BIT_PCD 4
-#define _PAGE_BIT_ACCESSED 5
-#define _PAGE_BIT_DIRTY 6
+#define _PAGE_BIT_PRESENT 0 /* is present */
+#define _PAGE_BIT_RW 1 /* writeable */
+#define _PAGE_BIT_USER 2 /* userspace addressable */
+#define _PAGE_BIT_PWT 3 /* page write through */
+#define _PAGE_BIT_PCD 4 /* page cache disabled */
+#define _PAGE_BIT_ACCESSED 5 /* was accessed (raised by CPU) */
+#define _PAGE_BIT_DIRTY 6 /* was written to (raised by CPU) */
#define _PAGE_BIT_FILE 6
#define _PAGE_BIT_PSE 7 /* 4 MB (or 2MB) page */
#define _PAGE_BIT_PAT 7 /* on 4KB pages */
@@ -48,24 +48,39 @@
#endif
/* If _PAGE_PRESENT is clear, we use these: */
-#define _PAGE_FILE _PAGE_DIRTY /* nonlinear file mapping, saved PTE; unset:swap */
+#define _PAGE_FILE _PAGE_DIRTY /* nonlinear file mapping,
+ * saved PTE; unset:swap */
#define _PAGE_PROTNONE _PAGE_PSE /* if the user mapped it with PROT_NONE;
pte_present gives true */
-#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+ _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \
+ _PAGE_DIRTY)
#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
-#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_NX)
+#define _PAGE_CACHE_MASK (_PAGE_PCD | _PAGE_PWT)
+#define _PAGE_CACHE_WB (0)
+#define _PAGE_CACHE_WC (_PAGE_PWT)
+#define _PAGE_CACHE_UC_MINUS (_PAGE_PCD)
+#define _PAGE_CACHE_UC (_PAGE_PCD | _PAGE_PWT)
-#define PAGE_SHARED_EXEC __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED)
-#define PAGE_COPY_NOEXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_NX)
-#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+ _PAGE_ACCESSED | _PAGE_NX)
+
+#define PAGE_SHARED_EXEC __pgprot(_PAGE_PRESENT | _PAGE_RW | \
+ _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY_NOEXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_ACCESSED)
#define PAGE_COPY PAGE_COPY_NOEXEC
-#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_NX)
-#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_ACCESSED | _PAGE_NX)
+#define PAGE_READONLY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | \
+ _PAGE_ACCESSED)
#ifdef CONFIG_X86_32
#define _PAGE_KERNEL_EXEC \
@@ -84,6 +99,7 @@
#define __PAGE_KERNEL_RO (__PAGE_KERNEL & ~_PAGE_RW)
#define __PAGE_KERNEL_RX (__PAGE_KERNEL_EXEC & ~_PAGE_RW)
#define __PAGE_KERNEL_EXEC_NOCACHE (__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_WC (__PAGE_KERNEL | _PAGE_CACHE_WC)
#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
#define __PAGE_KERNEL_UC_MINUS (__PAGE_KERNEL | _PAGE_PCD)
#define __PAGE_KERNEL_VSYSCALL (__PAGE_KERNEL_RX | _PAGE_USER)
@@ -101,6 +117,7 @@
#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO)
#define PAGE_KERNEL_EXEC MAKE_GLOBAL(__PAGE_KERNEL_EXEC)
#define PAGE_KERNEL_RX MAKE_GLOBAL(__PAGE_KERNEL_RX)
+#define PAGE_KERNEL_WC MAKE_GLOBAL(__PAGE_KERNEL_WC)
#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
#define PAGE_KERNEL_UC_MINUS MAKE_GLOBAL(__PAGE_KERNEL_UC_MINUS)
#define PAGE_KERNEL_EXEC_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_EXEC_NOCACHE)
@@ -134,7 +151,7 @@
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
*/
-extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
extern spinlock_t pgd_lock;
@@ -144,30 +161,101 @@
* The following only work if pte_present() is true.
* Undefined behaviour if not..
*/
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
-static inline int pte_huge(pte_t pte) { return pte_val(pte) & _PAGE_PSE; }
-static inline int pte_global(pte_t pte) { return pte_val(pte) & _PAGE_GLOBAL; }
-static inline int pte_exec(pte_t pte) { return !(pte_val(pte) & _PAGE_NX); }
-
-static inline int pmd_large(pmd_t pte) {
- return (pmd_val(pte) & (_PAGE_PSE|_PAGE_PRESENT)) ==
- (_PAGE_PSE|_PAGE_PRESENT);
+static inline int pte_dirty(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_DIRTY;
}
-static inline pte_t pte_mkclean(pte_t pte) { return __pte(pte_val(pte) & ~(pteval_t)_PAGE_DIRTY); }
-static inline pte_t pte_mkold(pte_t pte) { return __pte(pte_val(pte) & ~(pteval_t)_PAGE_ACCESSED); }
-static inline pte_t pte_wrprotect(pte_t pte) { return __pte(pte_val(pte) & ~(pteval_t)_PAGE_RW); }
-static inline pte_t pte_mkexec(pte_t pte) { return __pte(pte_val(pte) & ~(pteval_t)_PAGE_NX); }
-static inline pte_t pte_mkdirty(pte_t pte) { return __pte(pte_val(pte) | _PAGE_DIRTY); }
-static inline pte_t pte_mkyoung(pte_t pte) { return __pte(pte_val(pte) | _PAGE_ACCESSED); }
-static inline pte_t pte_mkwrite(pte_t pte) { return __pte(pte_val(pte) | _PAGE_RW); }
-static inline pte_t pte_mkhuge(pte_t pte) { return __pte(pte_val(pte) | _PAGE_PSE); }
-static inline pte_t pte_clrhuge(pte_t pte) { return __pte(pte_val(pte) & ~(pteval_t)_PAGE_PSE); }
-static inline pte_t pte_mkglobal(pte_t pte) { return __pte(pte_val(pte) | _PAGE_GLOBAL); }
-static inline pte_t pte_clrglobal(pte_t pte) { return __pte(pte_val(pte) & ~(pteval_t)_PAGE_GLOBAL); }
+static inline int pte_young(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_ACCESSED;
+}
+
+static inline int pte_write(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_RW;
+}
+
+static inline int pte_file(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_FILE;
+}
+
+static inline int pte_huge(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_PSE;
+}
+
+static inline int pte_global(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_GLOBAL;
+}
+
+static inline int pte_exec(pte_t pte)
+{
+ return !(pte_val(pte) & _PAGE_NX);
+}
+
+static inline int pmd_large(pmd_t pte)
+{
+ return (pmd_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+ (_PAGE_PSE | _PAGE_PRESENT);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+ return __pte(pte_val(pte) & ~(pteval_t)_PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+ return __pte(pte_val(pte) & ~(pteval_t)_PAGE_ACCESSED);
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ return __pte(pte_val(pte) & ~(pteval_t)_PAGE_RW);
+}
+
+static inline pte_t pte_mkexec(pte_t pte)
+{
+ return __pte(pte_val(pte) & ~(pteval_t)_PAGE_NX);
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+ return __pte(pte_val(pte) | _PAGE_DIRTY);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+ return __pte(pte_val(pte) | _PAGE_ACCESSED);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+ return __pte(pte_val(pte) | _PAGE_RW);
+}
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+ return __pte(pte_val(pte) | _PAGE_PSE);
+}
+
+static inline pte_t pte_clrhuge(pte_t pte)
+{
+ return __pte(pte_val(pte) & ~(pteval_t)_PAGE_PSE);
+}
+
+static inline pte_t pte_mkglobal(pte_t pte)
+{
+ return __pte(pte_val(pte) | _PAGE_GLOBAL);
+}
+
+static inline pte_t pte_clrglobal(pte_t pte)
+{
+ return __pte(pte_val(pte) & ~(pteval_t)_PAGE_GLOBAL);
+}
extern pteval_t __supported_pte_mask;
@@ -334,7 +422,8 @@
})
#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
{
pte_t pte = native_ptep_get_and_clear(ptep);
pte_update(mm, addr, ptep);
@@ -342,7 +431,9 @@
}
#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
-static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, unsigned long addr, pte_t *ptep, int full)
+static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep,
+ int full)
{
pte_t pte;
if (full) {
@@ -358,7 +449,8 @@
}
#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+static inline void ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
{
clear_bit(_PAGE_BIT_RW, (unsigned long *)&ptep->pte);
pte_update(mm, addr, ptep);
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
index 4e6a0fc..c4a6436 100644
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -40,13 +40,13 @@
#ifdef CONFIG_X86_PAE
# include <asm/pgtable-3level-defs.h>
# define PMD_SIZE (1UL << PMD_SHIFT)
-# define PMD_MASK (~(PMD_SIZE-1))
+# define PMD_MASK (~(PMD_SIZE - 1))
#else
# include <asm/pgtable-2level-defs.h>
#endif
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
+#define PGDIR_MASK (~(PGDIR_SIZE - 1))
#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
@@ -58,21 +58,22 @@
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
* area for the same reason. ;)
*/
-#define VMALLOC_OFFSET (8*1024*1024)
-#define VMALLOC_START (((unsigned long) high_memory + \
- 2*VMALLOC_OFFSET-1) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_OFFSET (8 * 1024 * 1024)
+#define VMALLOC_START (((unsigned long)high_memory + 2 * VMALLOC_OFFSET - 1) \
+ & ~(VMALLOC_OFFSET - 1))
#ifdef CONFIG_X86_PAE
#define LAST_PKMAP 512
#else
#define LAST_PKMAP 1024
#endif
-#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK)
+#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE * (LAST_PKMAP + 1)) \
+ & PMD_MASK)
#ifdef CONFIG_HIGHMEM
-# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE)
+# define VMALLOC_END (PKMAP_BASE - 2 * PAGE_SIZE)
#else
-# define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE)
+# define VMALLOC_END (FIXADDR_START - 2 * PAGE_SIZE)
#endif
/*
@@ -88,10 +89,16 @@
#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
-#define pmd_none(x) (!(unsigned long)pmd_val(x))
-#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pmd_none(x) (!(unsigned long)pmd_val((x)))
+#define pmd_present(x) (pmd_val((x)) & _PAGE_PRESENT)
+extern int pmd_bad(pmd_t pmd);
+
+#define pmd_bad_v1(x) \
+ (_KERNPG_TABLE != (pmd_val((x)) & ~(PAGE_MASK | _PAGE_USER)))
+#define pmd_bad_v2(x) \
+ (_KERNPG_TABLE != (pmd_val((x)) & ~(PAGE_MASK | _PAGE_USER | \
+ _PAGE_PSE | _PAGE_NX)))
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
@@ -117,17 +124,18 @@
}
/*
- * Macro to mark a page protection value as "uncacheable". On processors which do not support
- * it, this is a no-op.
+ * Macro to mark a page protection value as "uncacheable".
+ * On processors which do not support it, this is a no-op.
*/
-#define pgprot_noncached(prot) ((boot_cpu_data.x86 > 3) \
- ? (__pgprot(pgprot_val(prot) | _PAGE_PCD | _PAGE_PWT)) : (prot))
+#define pgprot_noncached(prot) \
+ ((boot_cpu_data.x86 > 3) \
+ ? (__pgprot(pgprot_val(prot) | _PAGE_PCD | _PAGE_PWT)) \
+ : (prot))
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*/
-
#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
/*
@@ -136,20 +144,20 @@
* this macro returns the index of the entry in the pgd page which would
* control the given virtual address
*/
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_index_k(addr) pgd_index(addr)
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_index_k(addr) pgd_index((addr))
/*
* pgd_offset() returns a (pgd_t *)
* pgd_index() is used get the offset into the pgd page's array of pgd_t's;
*/
-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index((address)))
/*
* a shortcut which implies the use of the kernel's pgd, instead
* of a process's
*/
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
static inline int pud_large(pud_t pud) { return 0; }
@@ -159,8 +167,8 @@
* this macro returns the index of the entry in the pmd page which would
* control the given virtual address
*/
-#define pmd_index(address) \
- (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+#define pmd_index(address) \
+ (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
/*
* the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
@@ -168,43 +176,45 @@
* this macro returns the index of the entry in the pte page which would
* control the given virtual address
*/
-#define pte_index(address) \
- (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) \
- ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_index(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+ ((pte_t *)pmd_page_vaddr(*(dir)) + pte_index((address)))
-#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
-#define pmd_page_vaddr(pmd) \
- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page_vaddr(pmd) \
+ ((unsigned long)__va(pmd_val((pmd)) & PAGE_MASK))
#if defined(CONFIG_HIGHPTE)
-#define pte_offset_map(dir, address) \
- ((pte_t *)kmap_atomic_pte(pmd_page(*(dir)),KM_PTE0) + pte_index(address))
-#define pte_offset_map_nested(dir, address) \
- ((pte_t *)kmap_atomic_pte(pmd_page(*(dir)),KM_PTE1) + pte_index(address))
-#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
-#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
+#define pte_offset_map(dir, address) \
+ ((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE0) + \
+ pte_index((address)))
+#define pte_offset_map_nested(dir, address) \
+ ((pte_t *)kmap_atomic_pte(pmd_page(*(dir)), KM_PTE1) + \
+ pte_index((address)))
+#define pte_unmap(pte) kunmap_atomic((pte), KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1)
#else
-#define pte_offset_map(dir, address) \
- ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
-#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_offset_map(dir, address) \
+ ((pte_t *)page_address(pmd_page(*(dir))) + pte_index((address)))
+#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address))
#define pte_unmap(pte) do { } while (0)
#define pte_unmap_nested(pte) do { } while (0)
#endif
/* Clear a kernel PTE and flush it from the TLB */
-#define kpte_clear_flush(ptep, vaddr) \
-do { \
- pte_clear(&init_mm, vaddr, ptep); \
- __flush_tlb_one(vaddr); \
+#define kpte_clear_flush(ptep, vaddr) \
+do { \
+ pte_clear(&init_mm, (vaddr), (ptep)); \
+ __flush_tlb_one((vaddr)); \
} while (0)
/*
* The i386 doesn't have any external MMU info: the kernel page
* tables contain all the necessary information.
*/
-#define update_mmu_cache(vma,address,pte) do { } while (0)
+#define update_mmu_cache(vma, address, pte) do { } while (0)
void native_pagetable_setup_start(pgd_t *base);
void native_pagetable_setup_done(pgd_t *base);
@@ -233,7 +243,7 @@
#define kern_addr_valid(kaddr) (0)
#endif
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
#endif /* _I386_PGTABLE_H */
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
index 0a0b77b..9fd87d0 100644
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -52,14 +52,18 @@
#ifndef __ASSEMBLY__
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %p(%016lx).\n", __FILE__, __LINE__, &(e), pte_val(e))
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %p(%016lx).\n", __FILE__, __LINE__, &(e), pmd_val(e))
-#define pud_ERROR(e) \
- printk("%s:%d: bad pud %p(%016lx).\n", __FILE__, __LINE__, &(e), pud_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %p(%016lx).\n", __FILE__, __LINE__, &(e), pgd_val(e))
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %p(%016lx).\n", \
+ __FILE__, __LINE__, &(e), pte_val(e))
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %p(%016lx).\n", \
+ __FILE__, __LINE__, &(e), pmd_val(e))
+#define pud_ERROR(e) \
+ printk("%s:%d: bad pud %p(%016lx).\n", \
+ __FILE__, __LINE__, &(e), pud_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %p(%016lx).\n", \
+ __FILE__, __LINE__, &(e), pgd_val(e))
#define pgd_none(x) (!pgd_val(x))
#define pud_none(x) (!pud_val(x))
@@ -87,7 +91,8 @@
#ifdef CONFIG_SMP
return native_make_pte(xchg(&xp->pte, 0));
#else
- /* native_local_ptep_get_and_clear, but duplicated because of cyclic dependency */
+ /* native_local_ptep_get_and_clear,
+ but duplicated because of cyclic dependency */
pte_t ret = *xp;
native_pte_clear(NULL, 0, xp);
return ret;
@@ -119,7 +124,7 @@
*pgdp = pgd;
}
-static inline void native_pgd_clear(pgd_t * pgd)
+static inline void native_pgd_clear(pgd_t *pgd)
{
native_set_pgd(pgd, native_make_pgd(0));
}
@@ -128,19 +133,19 @@
#endif /* !__ASSEMBLY__ */
-#define PMD_SIZE (_AC(1,UL) << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-#define PUD_SIZE (_AC(1,UL) << PUD_SHIFT)
-#define PUD_MASK (~(PUD_SIZE-1))
-#define PGDIR_SIZE (_AC(1,UL) << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
+#define PMD_SIZE (_AC(1, UL) << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE - 1))
+#define PUD_SIZE (_AC(1, UL) << PUD_SHIFT)
+#define PUD_MASK (~(PUD_SIZE - 1))
+#define PGDIR_SIZE (_AC(1, UL) << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE - 1))
-#define MAXMEM _AC(0x3fffffffffff, UL)
+#define MAXMEM _AC(0x00003fffffffffff, UL)
#define VMALLOC_START _AC(0xffffc20000000000, UL)
#define VMALLOC_END _AC(0xffffe1ffffffffff, UL)
#define VMEMMAP_START _AC(0xffffe20000000000, UL)
-#define MODULES_VADDR _AC(0xffffffff88000000, UL)
+#define MODULES_VADDR _AC(0xffffffffa0000000, UL)
#define MODULES_END _AC(0xfffffffffff00000, UL)
#define MODULES_LEN (MODULES_END - MODULES_VADDR)
@@ -153,26 +158,28 @@
static inline unsigned long pud_bad(pud_t pud)
{
- return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return pud_val(pud) &
+ ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX);
}
static inline unsigned long pmd_bad(pmd_t pmd)
{
- return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return pmd_val(pmd) &
+ ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX);
}
-#define pte_none(x) (!pte_val(x))
-#define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+#define pte_none(x) (!pte_val((x)))
+#define pte_present(x) (pte_val((x)) & (_PAGE_PRESENT | _PAGE_PROTNONE))
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) /* FIXME: is this right? */
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-#define pte_pfn(x) ((pte_val(x) & __PHYSICAL_MASK) >> PAGE_SHIFT)
+#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) /* FIXME: is this right? */
+#define pte_page(x) pfn_to_page(pte_pfn((x)))
+#define pte_pfn(x) ((pte_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
/*
* Macro to mark a page protection value as "uncacheable".
*/
-#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_PCD | _PAGE_PWT))
-
+#define pgprot_noncached(prot) \
+ (__pgprot(pgprot_val((prot)) | _PAGE_PCD | _PAGE_PWT))
/*
* Conversion functions: convert a page and protection to a page entry,
@@ -182,75 +189,81 @@
/*
* Level 4 access.
*/
-#define pgd_page_vaddr(pgd) ((unsigned long) __va((unsigned long)pgd_val(pgd) & PTE_MASK))
-#define pgd_page(pgd) (pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT))
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr))
-#define pgd_offset_k(address) (init_level4_pgt + pgd_index(address))
+#define pgd_page_vaddr(pgd) \
+ ((unsigned long)__va((unsigned long)pgd_val((pgd)) & PTE_MASK))
+#define pgd_page(pgd) (pfn_to_page(pgd_val((pgd)) >> PAGE_SHIFT))
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index((address)))
+#define pgd_offset_k(address) (init_level4_pgt + pgd_index((address)))
#define pgd_present(pgd) (pgd_val(pgd) & _PAGE_PRESENT)
static inline int pgd_large(pgd_t pgd) { return 0; }
#define mk_kernel_pgd(address) ((pgd_t){ (address) | _KERNPG_TABLE })
/* PUD - Level3 access */
/* to find an entry in a page-table-directory. */
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PHYSICAL_PAGE_MASK))
-#define pud_page(pud) (pfn_to_page(pud_val(pud) >> PAGE_SHIFT))
-#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
-#define pud_offset(pgd, address) ((pud_t *) pgd_page_vaddr(*(pgd)) + pud_index(address))
-#define pud_present(pud) (pud_val(pud) & _PAGE_PRESENT)
+#define pud_page_vaddr(pud) \
+ ((unsigned long)__va(pud_val((pud)) & PHYSICAL_PAGE_MASK))
+#define pud_page(pud) (pfn_to_page(pud_val((pud)) >> PAGE_SHIFT))
+#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
+#define pud_offset(pgd, address) \
+ ((pud_t *)pgd_page_vaddr(*(pgd)) + pud_index((address)))
+#define pud_present(pud) (pud_val((pud)) & _PAGE_PRESENT)
static inline int pud_large(pud_t pte)
{
- return (pud_val(pte) & (_PAGE_PSE|_PAGE_PRESENT)) ==
- (_PAGE_PSE|_PAGE_PRESENT);
+ return (pud_val(pte) & (_PAGE_PSE | _PAGE_PRESENT)) ==
+ (_PAGE_PSE | _PAGE_PRESENT);
}
/* PMD - Level 2 access */
-#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val(pmd) & PTE_MASK))
-#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+#define pmd_page_vaddr(pmd) ((unsigned long) __va(pmd_val((pmd)) & PTE_MASK))
+#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
-#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
-#define pmd_offset(dir, address) ((pmd_t *) pud_page_vaddr(*(dir)) + \
- pmd_index(address))
-#define pmd_none(x) (!pmd_val(x))
-#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
-#define pfn_pmd(nr,prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val(prot)))
-#define pmd_pfn(x) ((pmd_val(x) & __PHYSICAL_MASK) >> PAGE_SHIFT)
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+#define pmd_offset(dir, address) ((pmd_t *)pud_page_vaddr(*(dir)) + \
+ pmd_index(address))
+#define pmd_none(x) (!pmd_val((x)))
+#define pmd_present(x) (pmd_val((x)) & _PAGE_PRESENT)
+#define pfn_pmd(nr, prot) (__pmd(((nr) << PAGE_SHIFT) | pgprot_val((prot))))
+#define pmd_pfn(x) ((pmd_val((x)) & __PHYSICAL_MASK) >> PAGE_SHIFT)
-#define pte_to_pgoff(pte) ((pte_val(pte) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
-#define pgoff_to_pte(off) ((pte_t) { .pte = ((off) << PAGE_SHIFT) | _PAGE_FILE })
+#define pte_to_pgoff(pte) ((pte_val((pte)) & PHYSICAL_PAGE_MASK) >> PAGE_SHIFT)
+#define pgoff_to_pte(off) ((pte_t) { .pte = ((off) << PAGE_SHIFT) | \
+ _PAGE_FILE })
#define PTE_FILE_MAX_BITS __PHYSICAL_MASK_SHIFT
/* PTE - Level 1 access. */
/* page, protection -> pte */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-
-#define pte_index(address) \
- (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn((page)), (pgprot))
+
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
#define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_vaddr(*(dir)) + \
- pte_index(address))
+ pte_index((address)))
/* x86-64 always has all page tables mapped. */
-#define pte_offset_map(dir,address) pte_offset_kernel(dir,address)
-#define pte_offset_map_nested(dir,address) pte_offset_kernel(dir,address)
+#define pte_offset_map(dir, address) pte_offset_kernel((dir), (address))
+#define pte_offset_map_nested(dir, address) pte_offset_kernel((dir), (address))
#define pte_unmap(pte) /* NOP */
-#define pte_unmap_nested(pte) /* NOP */
+#define pte_unmap_nested(pte) /* NOP */
-#define update_mmu_cache(vma,address,pte) do { } while (0)
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+extern int direct_gbpages;
/* Encode and de-code a swap entry */
#define __swp_type(x) (((x).val >> 1) & 0x3f)
#define __swp_offset(x) ((x).val >> 8)
-#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 1) | ((offset) << 8) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 1) | \
+ ((offset) << 8) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val((pte)) })
#define __swp_entry_to_pte(x) ((pte_t) { .pte = (x).val })
-extern int kern_addr_valid(unsigned long addr);
+extern int kern_addr_valid(unsigned long addr);
extern void cleanup_highmap(void);
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
#define HAVE_ARCH_UNMAPPED_AREA
#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
@@ -263,8 +276,10 @@
/* fs/proc/kcore.c */
#define kc_vaddr_to_offset(v) ((v) & __VIRTUAL_MASK)
-#define kc_offset_to_vaddr(o) \
- (((o) & (1UL << (__VIRTUAL_MASK_SHIFT-1))) ? ((o) | (~__VIRTUAL_MASK)) : (o))
+#define kc_offset_to_vaddr(o) \
+ (((o) & (1UL << (__VIRTUAL_MASK_SHIFT - 1))) \
+ ? ((o) | ~__VIRTUAL_MASK) \
+ : (o))
#define __HAVE_ARCH_PTE_SAME
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-x86/posix_types.h b/include/asm-x86/posix_types.h
index bb7133d..fe312a5 100644
--- a/include/asm-x86/posix_types.h
+++ b/include/asm-x86/posix_types.h
@@ -1,11 +1,5 @@
#ifdef __KERNEL__
-# ifdef CONFIG_X86_32
-# include "posix_types_32.h"
-# else
-# include "posix_types_64.h"
-# endif
-#else
-# ifdef __i386__
+# if defined(CONFIG_X86_32) || defined(__i386__)
# include "posix_types_32.h"
# else
# include "posix_types_64.h"
diff --git a/include/asm-x86/posix_types_32.h b/include/asm-x86/posix_types_32.h
index 015e539..b031efd 100644
--- a/include/asm-x86/posix_types_32.h
+++ b/include/asm-x86/posix_types_32.h
@@ -45,32 +45,39 @@
#if defined(__KERNEL__)
#undef __FD_SET
-#define __FD_SET(fd,fdsetp) \
- __asm__ __volatile__("btsl %1,%0": \
- "+m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
+#define __FD_SET(fd,fdsetp) \
+ asm volatile("btsl %1,%0": \
+ "+m" (*(__kernel_fd_set *)(fdsetp)) \
+ : "r" ((int)(fd)))
#undef __FD_CLR
-#define __FD_CLR(fd,fdsetp) \
- __asm__ __volatile__("btrl %1,%0": \
- "+m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
+#define __FD_CLR(fd,fdsetp) \
+ asm volatile("btrl %1,%0": \
+ "+m" (*(__kernel_fd_set *)(fdsetp)) \
+ : "r" ((int) (fd)))
#undef __FD_ISSET
-#define __FD_ISSET(fd,fdsetp) (__extension__ ({ \
- unsigned char __result; \
- __asm__ __volatile__("btl %1,%2 ; setb %0" \
- :"=q" (__result) :"r" ((int) (fd)), \
- "m" (*(__kernel_fd_set *) (fdsetp))); \
- __result; }))
+#define __FD_ISSET(fd,fdsetp) \
+ (__extension__ \
+ ({ \
+ unsigned char __result; \
+ asm volatile("btl %1,%2 ; setb %0" \
+ : "=q" (__result) \
+ : "r" ((int)(fd)), \
+ "m" (*(__kernel_fd_set *)(fdsetp))); \
+ __result; \
+}))
#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) \
-do { \
- int __d0, __d1; \
- __asm__ __volatile__("cld ; rep ; stosl" \
- :"=m" (*(__kernel_fd_set *) (fdsetp)), \
- "=&c" (__d0), "=&D" (__d1) \
- :"a" (0), "1" (__FDSET_LONGS), \
- "2" ((__kernel_fd_set *) (fdsetp)) : "memory"); \
+#define __FD_ZERO(fdsetp) \
+do { \
+ int __d0, __d1; \
+ asm volatile("cld ; rep ; stosl" \
+ : "=m" (*(__kernel_fd_set *)(fdsetp)), \
+ "=&c" (__d0), "=&D" (__d1) \
+ : "a" (0), "1" (__FDSET_LONGS), \
+ "2" ((__kernel_fd_set *)(fdsetp)) \
+ : "memory"); \
} while (0)
#endif /* defined(__KERNEL__) */
diff --git a/include/asm-x86/posix_types_64.h b/include/asm-x86/posix_types_64.h
index 9926aa4..d6624c9 100644
--- a/include/asm-x86/posix_types_64.h
+++ b/include/asm-x86/posix_types_64.h
@@ -46,7 +46,7 @@
#ifdef __KERNEL__
#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
{
unsigned long _tmp = fd / __NFDBITS;
unsigned long _rem = fd % __NFDBITS;
@@ -54,7 +54,7 @@
}
#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
{
unsigned long _tmp = fd / __NFDBITS;
unsigned long _rem = fd % __NFDBITS;
@@ -62,7 +62,7 @@
}
#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
{
unsigned long _tmp = fd / __NFDBITS;
unsigned long _rem = fd % __NFDBITS;
@@ -74,36 +74,36 @@
* for 256 and 1024-bit fd_sets respectively)
*/
#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+static inline void __FD_ZERO(__kernel_fd_set *p)
{
unsigned long *tmp = p->fds_bits;
int i;
if (__builtin_constant_p(__FDSET_LONGS)) {
switch (__FDSET_LONGS) {
- case 32:
- tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
- tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
- tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
- tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
- tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
- tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
- tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
- tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
- return;
- case 16:
- tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
- tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
- tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
- tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
- return;
- case 8:
- tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
- tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
- return;
- case 4:
- tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
- return;
+ case 32:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+ tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+ tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+ tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+ tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+ tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+ tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+ return;
+ case 16:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+ tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+ tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+ return;
+ case 8:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+ return;
+ case 4:
+ tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+ return;
}
}
i = __FDSET_LONGS;
diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h
index 45a2f0a..6e26c7c 100644
--- a/include/asm-x86/processor.h
+++ b/include/asm-x86/processor.h
@@ -3,8 +3,7 @@
#include <asm/processor-flags.h>
-/* migration helpers, for KVM - will be removed in 2.6.25: */
-#include <asm/vm86.h>
+/* migration helper, for KVM - will be removed in 2.6.25: */
#define Xgt_desc_struct desc_ptr
/* Forward declaration, a strange C thing */
@@ -24,6 +23,7 @@
#include <asm/msr.h>
#include <asm/desc_defs.h>
#include <asm/nops.h>
+
#include <linux/personality.h>
#include <linux/cpumask.h>
#include <linux/cache.h>
@@ -37,16 +37,18 @@
static inline void *current_text_addr(void)
{
void *pc;
- asm volatile("mov $1f,%0\n1:":"=r" (pc));
+
+ asm volatile("mov $1f, %0; 1:":"=r" (pc));
+
return pc;
}
#ifdef CONFIG_X86_VSMP
-#define ARCH_MIN_TASKALIGN (1 << INTERNODE_CACHE_SHIFT)
-#define ARCH_MIN_MMSTRUCT_ALIGN (1 << INTERNODE_CACHE_SHIFT)
+# define ARCH_MIN_TASKALIGN (1 << INTERNODE_CACHE_SHIFT)
+# define ARCH_MIN_MMSTRUCT_ALIGN (1 << INTERNODE_CACHE_SHIFT)
#else
-#define ARCH_MIN_TASKALIGN 16
-#define ARCH_MIN_MMSTRUCT_ALIGN 0
+# define ARCH_MIN_TASKALIGN 16
+# define ARCH_MIN_MMSTRUCT_ALIGN 0
#endif
/*
@@ -56,69 +58,82 @@
*/
struct cpuinfo_x86 {
- __u8 x86; /* CPU family */
- __u8 x86_vendor; /* CPU vendor */
- __u8 x86_model;
- __u8 x86_mask;
+ __u8 x86; /* CPU family */
+ __u8 x86_vendor; /* CPU vendor */
+ __u8 x86_model;
+ __u8 x86_mask;
#ifdef CONFIG_X86_32
- char wp_works_ok; /* It doesn't on 386's */
- char hlt_works_ok; /* Problems on some 486Dx4's and old 386's */
- char hard_math;
- char rfu;
- char fdiv_bug;
- char f00f_bug;
- char coma_bug;
- char pad0;
+ char wp_works_ok; /* It doesn't on 386's */
+
+ /* Problems on some 486Dx4's and old 386's: */
+ char hlt_works_ok;
+ char hard_math;
+ char rfu;
+ char fdiv_bug;
+ char f00f_bug;
+ char coma_bug;
+ char pad0;
#else
- /* number of 4K pages in DTLB/ITLB combined(in pages)*/
- int x86_tlbsize;
- __u8 x86_virt_bits, x86_phys_bits;
- /* cpuid returned core id bits */
- __u8 x86_coreid_bits;
- /* Max extended CPUID function supported */
- __u32 extended_cpuid_level;
+ /* Number of 4K pages in DTLB/ITLB combined(in pages): */
+ int x86_tlbsize;
+ __u8 x86_virt_bits;
+ __u8 x86_phys_bits;
+ /* CPUID returned core id bits: */
+ __u8 x86_coreid_bits;
+ /* Max extended CPUID function supported: */
+ __u32 extended_cpuid_level;
#endif
- int cpuid_level; /* Maximum supported CPUID level, -1=no CPUID */
- __u32 x86_capability[NCAPINTS];
- char x86_vendor_id[16];
- char x86_model_id[64];
- int x86_cache_size; /* in KB - valid for CPUS which support this
- call */
- int x86_cache_alignment; /* In bytes */
- int x86_power;
- unsigned long loops_per_jiffy;
+ /* Maximum supported CPUID level, -1=no CPUID: */
+ int cpuid_level;
+ __u32 x86_capability[NCAPINTS];
+ char x86_vendor_id[16];
+ char x86_model_id[64];
+ /* in KB - valid for CPUS which support this call: */
+ int x86_cache_size;
+ int x86_cache_alignment; /* In bytes */
+ int x86_power;
+ unsigned long loops_per_jiffy;
#ifdef CONFIG_SMP
- cpumask_t llc_shared_map; /* cpus sharing the last level cache */
+ /* cpus sharing the last level cache: */
+ cpumask_t llc_shared_map;
#endif
- u16 x86_max_cores; /* cpuid returned max cores value */
- u16 apicid;
- u16 x86_clflush_size;
+ /* cpuid returned max cores value: */
+ u16 x86_max_cores;
+ u16 apicid;
+ u16 initial_apicid;
+ u16 x86_clflush_size;
#ifdef CONFIG_SMP
- u16 booted_cores; /* number of cores as seen by OS */
- u16 phys_proc_id; /* Physical processor id. */
- u16 cpu_core_id; /* Core id */
- u16 cpu_index; /* index into per_cpu list */
+ /* number of cores as seen by the OS: */
+ u16 booted_cores;
+ /* Physical processor id: */
+ u16 phys_proc_id;
+ /* Core id: */
+ u16 cpu_core_id;
+ /* Index into per_cpu list: */
+ u16 cpu_index;
#endif
} __attribute__((__aligned__(SMP_CACHE_BYTES)));
-#define X86_VENDOR_INTEL 0
-#define X86_VENDOR_CYRIX 1
-#define X86_VENDOR_AMD 2
-#define X86_VENDOR_UMC 3
-#define X86_VENDOR_NEXGEN 4
-#define X86_VENDOR_CENTAUR 5
-#define X86_VENDOR_TRANSMETA 7
-#define X86_VENDOR_NSC 8
-#define X86_VENDOR_NUM 9
-#define X86_VENDOR_UNKNOWN 0xff
+#define X86_VENDOR_INTEL 0
+#define X86_VENDOR_CYRIX 1
+#define X86_VENDOR_AMD 2
+#define X86_VENDOR_UMC 3
+#define X86_VENDOR_NEXGEN 4
+#define X86_VENDOR_CENTAUR 5
+#define X86_VENDOR_TRANSMETA 7
+#define X86_VENDOR_NSC 8
+#define X86_VENDOR_NUM 9
+
+#define X86_VENDOR_UNKNOWN 0xff
/*
* capabilities of CPUs
*/
-extern struct cpuinfo_x86 boot_cpu_data;
-extern struct cpuinfo_x86 new_cpu_data;
-extern struct tss_struct doublefault_tss;
-extern __u32 cleared_cpu_caps[NCAPINTS];
+extern struct cpuinfo_x86 boot_cpu_data;
+extern struct cpuinfo_x86 new_cpu_data;
+
+extern struct tss_struct doublefault_tss;
+extern __u32 cleared_cpu_caps[NCAPINTS];
#ifdef CONFIG_SMP
DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
@@ -129,7 +144,18 @@
#define current_cpu_data boot_cpu_data
#endif
-void cpu_detect(struct cpuinfo_x86 *c);
+static inline int hlt_works(int cpu)
+{
+#ifdef CONFIG_X86_32
+ return cpu_data(cpu).hlt_works_ok;
+#else
+ return 1;
+#endif
+}
+
+#define cache_line_size() (boot_cpu_data.x86_cache_alignment)
+
+extern void cpu_detect(struct cpuinfo_x86 *c);
extern void identify_cpu(struct cpuinfo_x86 *);
extern void identify_boot_cpu(void);
@@ -146,15 +172,15 @@
#endif
static inline void native_cpuid(unsigned int *eax, unsigned int *ebx,
- unsigned int *ecx, unsigned int *edx)
+ unsigned int *ecx, unsigned int *edx)
{
/* ecx is often an input as well as an output. */
- __asm__("cpuid"
- : "=a" (*eax),
- "=b" (*ebx),
- "=c" (*ecx),
- "=d" (*edx)
- : "0" (*eax), "2" (*ecx));
+ asm("cpuid"
+ : "=a" (*eax),
+ "=b" (*ebx),
+ "=c" (*ecx),
+ "=d" (*edx)
+ : "0" (*eax), "2" (*ecx));
}
static inline void load_cr3(pgd_t *pgdir)
@@ -165,54 +191,67 @@
#ifdef CONFIG_X86_32
/* This is the TSS defined by the hardware. */
struct x86_hw_tss {
- unsigned short back_link, __blh;
- unsigned long sp0;
- unsigned short ss0, __ss0h;
- unsigned long sp1;
- unsigned short ss1, __ss1h; /* ss1 caches MSR_IA32_SYSENTER_CS */
- unsigned long sp2;
- unsigned short ss2, __ss2h;
- unsigned long __cr3;
- unsigned long ip;
- unsigned long flags;
- unsigned long ax, cx, dx, bx;
- unsigned long sp, bp, si, di;
- unsigned short es, __esh;
- unsigned short cs, __csh;
- unsigned short ss, __ssh;
- unsigned short ds, __dsh;
- unsigned short fs, __fsh;
- unsigned short gs, __gsh;
- unsigned short ldt, __ldth;
- unsigned short trace, io_bitmap_base;
+ unsigned short back_link, __blh;
+ unsigned long sp0;
+ unsigned short ss0, __ss0h;
+ unsigned long sp1;
+ /* ss1 caches MSR_IA32_SYSENTER_CS: */
+ unsigned short ss1, __ss1h;
+ unsigned long sp2;
+ unsigned short ss2, __ss2h;
+ unsigned long __cr3;
+ unsigned long ip;
+ unsigned long flags;
+ unsigned long ax;
+ unsigned long cx;
+ unsigned long dx;
+ unsigned long bx;
+ unsigned long sp;
+ unsigned long bp;
+ unsigned long si;
+ unsigned long di;
+ unsigned short es, __esh;
+ unsigned short cs, __csh;
+ unsigned short ss, __ssh;
+ unsigned short ds, __dsh;
+ unsigned short fs, __fsh;
+ unsigned short gs, __gsh;
+ unsigned short ldt, __ldth;
+ unsigned short trace;
+ unsigned short io_bitmap_base;
+
} __attribute__((packed));
#else
struct x86_hw_tss {
- u32 reserved1;
- u64 sp0;
- u64 sp1;
- u64 sp2;
- u64 reserved2;
- u64 ist[7];
- u32 reserved3;
- u32 reserved4;
- u16 reserved5;
- u16 io_bitmap_base;
+ u32 reserved1;
+ u64 sp0;
+ u64 sp1;
+ u64 sp2;
+ u64 reserved2;
+ u64 ist[7];
+ u32 reserved3;
+ u32 reserved4;
+ u16 reserved5;
+ u16 io_bitmap_base;
+
} __attribute__((packed)) ____cacheline_aligned;
#endif
/*
- * Size of io_bitmap.
+ * IO-bitmap sizes:
*/
-#define IO_BITMAP_BITS 65536
-#define IO_BITMAP_BYTES (IO_BITMAP_BITS/8)
-#define IO_BITMAP_LONGS (IO_BITMAP_BYTES/sizeof(long))
-#define IO_BITMAP_OFFSET offsetof(struct tss_struct, io_bitmap)
-#define INVALID_IO_BITMAP_OFFSET 0x8000
-#define INVALID_IO_BITMAP_OFFSET_LAZY 0x9000
+#define IO_BITMAP_BITS 65536
+#define IO_BITMAP_BYTES (IO_BITMAP_BITS/8)
+#define IO_BITMAP_LONGS (IO_BITMAP_BYTES/sizeof(long))
+#define IO_BITMAP_OFFSET offsetof(struct tss_struct, io_bitmap)
+#define INVALID_IO_BITMAP_OFFSET 0x8000
+#define INVALID_IO_BITMAP_OFFSET_LAZY 0x9000
struct tss_struct {
- struct x86_hw_tss x86_tss;
+ /*
+ * The hardware state:
+ */
+ struct x86_hw_tss x86_tss;
/*
* The extra 1 is there because the CPU will access an
@@ -220,90 +259,108 @@
* bitmap. The extra byte must be all 1 bits, and must
* be within the limit.
*/
- unsigned long io_bitmap[IO_BITMAP_LONGS + 1];
+ unsigned long io_bitmap[IO_BITMAP_LONGS + 1];
/*
* Cache the current maximum and the last task that used the bitmap:
*/
- unsigned long io_bitmap_max;
- struct thread_struct *io_bitmap_owner;
+ unsigned long io_bitmap_max;
+ struct thread_struct *io_bitmap_owner;
+
/*
- * pads the TSS to be cacheline-aligned (size is 0x100)
+ * Pad the TSS to be cacheline-aligned (size is 0x100):
*/
- unsigned long __cacheline_filler[35];
+ unsigned long __cacheline_filler[35];
/*
- * .. and then another 0x100 bytes for emergency kernel stack
+ * .. and then another 0x100 bytes for the emergency kernel stack:
*/
- unsigned long stack[64];
+ unsigned long stack[64];
+
} __attribute__((packed));
DECLARE_PER_CPU(struct tss_struct, init_tss);
-/* Save the original ist values for checking stack pointers during debugging */
+/*
+ * Save the original ist values for checking stack pointers during debugging
+ */
struct orig_ist {
- unsigned long ist[7];
+ unsigned long ist[7];
};
#define MXCSR_DEFAULT 0x1f80
struct i387_fsave_struct {
- u32 cwd;
- u32 swd;
- u32 twd;
- u32 fip;
- u32 fcs;
- u32 foo;
- u32 fos;
- u32 st_space[20]; /* 8*10 bytes for each FP-reg = 80 bytes */
- u32 status; /* software status information */
+ u32 cwd; /* FPU Control Word */
+ u32 swd; /* FPU Status Word */
+ u32 twd; /* FPU Tag Word */
+ u32 fip; /* FPU IP Offset */
+ u32 fcs; /* FPU IP Selector */
+ u32 foo; /* FPU Operand Pointer Offset */
+ u32 fos; /* FPU Operand Pointer Selector */
+
+ /* 8*10 bytes for each FP-reg = 80 bytes: */
+ u32 st_space[20];
+
+ /* Software status information [not touched by FSAVE ]: */
+ u32 status;
};
struct i387_fxsave_struct {
- u16 cwd;
- u16 swd;
- u16 twd;
- u16 fop;
+ u16 cwd; /* Control Word */
+ u16 swd; /* Status Word */
+ u16 twd; /* Tag Word */
+ u16 fop; /* Last Instruction Opcode */
union {
struct {
- u64 rip;
- u64 rdp;
+ u64 rip; /* Instruction Pointer */
+ u64 rdp; /* Data Pointer */
};
struct {
- u32 fip;
- u32 fcs;
- u32 foo;
- u32 fos;
+ u32 fip; /* FPU IP Offset */
+ u32 fcs; /* FPU IP Selector */
+ u32 foo; /* FPU Operand Offset */
+ u32 fos; /* FPU Operand Selector */
};
};
- u32 mxcsr;
- u32 mxcsr_mask;
- u32 st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */
- u32 xmm_space[64]; /* 16*16 bytes for each XMM-reg = 256 bytes */
- u32 padding[24];
+ u32 mxcsr; /* MXCSR Register State */
+ u32 mxcsr_mask; /* MXCSR Mask */
+
+ /* 8*16 bytes for each FP-reg = 128 bytes: */
+ u32 st_space[32];
+
+ /* 16*16 bytes for each XMM-reg = 256 bytes: */
+ u32 xmm_space[64];
+
+ u32 padding[24];
+
} __attribute__((aligned(16)));
struct i387_soft_struct {
- u32 cwd;
- u32 swd;
- u32 twd;
- u32 fip;
- u32 fcs;
- u32 foo;
- u32 fos;
- u32 st_space[20]; /* 8*10 bytes for each FP-reg = 80 bytes */
- u8 ftop, changed, lookahead, no_update, rm, alimit;
- struct info *info;
- u32 entry_eip;
+ u32 cwd;
+ u32 swd;
+ u32 twd;
+ u32 fip;
+ u32 fcs;
+ u32 foo;
+ u32 fos;
+ /* 8*10 bytes for each FP-reg = 80 bytes: */
+ u32 st_space[20];
+ u8 ftop;
+ u8 changed;
+ u8 lookahead;
+ u8 no_update;
+ u8 rm;
+ u8 alimit;
+ struct info *info;
+ u32 entry_eip;
};
union i387_union {
struct i387_fsave_struct fsave;
struct i387_fxsave_struct fxsave;
- struct i387_soft_struct soft;
+ struct i387_soft_struct soft;
};
-#ifdef CONFIG_X86_32
-DECLARE_PER_CPU(u8, cpu_llc_id);
-#else
+#ifdef CONFIG_X86_64
DECLARE_PER_CPU(struct orig_ist, orig_ist);
#endif
@@ -313,42 +370,50 @@
extern unsigned short num_cache_leaves;
struct thread_struct {
-/* cached TLS descriptors. */
- struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
- unsigned long sp0;
- unsigned long sp;
+ /* Cached TLS descriptors: */
+ struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
+ unsigned long sp0;
+ unsigned long sp;
#ifdef CONFIG_X86_32
- unsigned long sysenter_cs;
+ unsigned long sysenter_cs;
#else
- unsigned long usersp; /* Copy from PDA */
- unsigned short es, ds, fsindex, gsindex;
+ unsigned long usersp; /* Copy from PDA */
+ unsigned short es;
+ unsigned short ds;
+ unsigned short fsindex;
+ unsigned short gsindex;
#endif
- unsigned long ip;
- unsigned long fs;
- unsigned long gs;
-/* Hardware debugging registers */
- unsigned long debugreg0;
- unsigned long debugreg1;
- unsigned long debugreg2;
- unsigned long debugreg3;
- unsigned long debugreg6;
- unsigned long debugreg7;
-/* fault info */
- unsigned long cr2, trap_no, error_code;
-/* floating point info */
+ unsigned long ip;
+ unsigned long fs;
+ unsigned long gs;
+ /* Hardware debugging registers: */
+ unsigned long debugreg0;
+ unsigned long debugreg1;
+ unsigned long debugreg2;
+ unsigned long debugreg3;
+ unsigned long debugreg6;
+ unsigned long debugreg7;
+ /* Fault info: */
+ unsigned long cr2;
+ unsigned long trap_no;
+ unsigned long error_code;
+ /* Floating point info: */
union i387_union i387 __attribute__((aligned(16)));;
#ifdef CONFIG_X86_32
-/* virtual 86 mode info */
+ /* Virtual 86 mode info */
struct vm86_struct __user *vm86_info;
unsigned long screen_bitmap;
- unsigned long v86flags, v86mask, saved_sp0;
- unsigned int saved_fs, saved_gs;
+ unsigned long v86flags;
+ unsigned long v86mask;
+ unsigned long saved_sp0;
+ unsigned int saved_fs;
+ unsigned int saved_gs;
#endif
-/* IO permissions */
- unsigned long *io_bitmap_ptr;
- unsigned long iopl;
-/* max allowed port in the bitmap, in bytes: */
- unsigned io_bitmap_max;
+ /* IO permissions: */
+ unsigned long *io_bitmap_ptr;
+ unsigned long iopl;
+ /* Max allowed port in the bitmap, in bytes: */
+ unsigned io_bitmap_max;
/* MSR_IA32_DEBUGCTLMSR value to switch in if TIF_DEBUGCTLMSR is set. */
unsigned long debugctlmsr;
/* Debug Store - if not 0 points to a DS Save Area configuration;
@@ -358,21 +423,27 @@
static inline unsigned long native_get_debugreg(int regno)
{
- unsigned long val = 0; /* Damn you, gcc! */
+ unsigned long val = 0; /* Damn you, gcc! */
switch (regno) {
case 0:
- asm("mov %%db0, %0" :"=r" (val)); break;
+ asm("mov %%db0, %0" :"=r" (val));
+ break;
case 1:
- asm("mov %%db1, %0" :"=r" (val)); break;
+ asm("mov %%db1, %0" :"=r" (val));
+ break;
case 2:
- asm("mov %%db2, %0" :"=r" (val)); break;
+ asm("mov %%db2, %0" :"=r" (val));
+ break;
case 3:
- asm("mov %%db3, %0" :"=r" (val)); break;
+ asm("mov %%db3, %0" :"=r" (val));
+ break;
case 6:
- asm("mov %%db6, %0" :"=r" (val)); break;
+ asm("mov %%db6, %0" :"=r" (val));
+ break;
case 7:
- asm("mov %%db7, %0" :"=r" (val)); break;
+ asm("mov %%db7, %0" :"=r" (val));
+ break;
default:
BUG();
}
@@ -383,22 +454,22 @@
{
switch (regno) {
case 0:
- asm("mov %0,%%db0" : /* no output */ :"r" (value));
+ asm("mov %0, %%db0" ::"r" (value));
break;
case 1:
- asm("mov %0,%%db1" : /* no output */ :"r" (value));
+ asm("mov %0, %%db1" ::"r" (value));
break;
case 2:
- asm("mov %0,%%db2" : /* no output */ :"r" (value));
+ asm("mov %0, %%db2" ::"r" (value));
break;
case 3:
- asm("mov %0,%%db3" : /* no output */ :"r" (value));
+ asm("mov %0, %%db3" ::"r" (value));
break;
case 6:
- asm("mov %0,%%db6" : /* no output */ :"r" (value));
+ asm("mov %0, %%db6" ::"r" (value));
break;
case 7:
- asm("mov %0,%%db7" : /* no output */ :"r" (value));
+ asm("mov %0, %%db7" ::"r" (value));
break;
default:
BUG();
@@ -412,23 +483,24 @@
{
#ifdef CONFIG_X86_32
unsigned int reg;
- __asm__ __volatile__ ("pushfl;"
- "popl %0;"
- "andl %1, %0;"
- "orl %2, %0;"
- "pushl %0;"
- "popfl"
- : "=&r" (reg)
- : "i" (~X86_EFLAGS_IOPL), "r" (mask));
+
+ asm volatile ("pushfl;"
+ "popl %0;"
+ "andl %1, %0;"
+ "orl %2, %0;"
+ "pushl %0;"
+ "popfl"
+ : "=&r" (reg)
+ : "i" (~X86_EFLAGS_IOPL), "r" (mask));
#endif
}
-static inline void native_load_sp0(struct tss_struct *tss,
- struct thread_struct *thread)
+static inline void
+native_load_sp0(struct tss_struct *tss, struct thread_struct *thread)
{
tss->x86_tss.sp0 = thread->sp0;
#ifdef CONFIG_X86_32
- /* Only happens when SEP is enabled, no need to test "SEP"arately */
+ /* Only happens when SEP is enabled, no need to test "SEP"arately: */
if (unlikely(tss->x86_tss.ss1 != thread->sysenter_cs)) {
tss->x86_tss.ss1 = thread->sysenter_cs;
wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
@@ -446,8 +518,8 @@
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
-#define __cpuid native_cpuid
-#define paravirt_enabled() 0
+#define __cpuid native_cpuid
+#define paravirt_enabled() 0
/*
* These special macros can be used to get or set a debugging register
@@ -473,11 +545,12 @@
* enable), so that any CPU's that boot up
* after us can get the correct flags.
*/
-extern unsigned long mmu_cr4_features;
+extern unsigned long mmu_cr4_features;
static inline void set_in_cr4(unsigned long mask)
{
unsigned cr4;
+
mmu_cr4_features |= mask;
cr4 = read_cr4();
cr4 |= mask;
@@ -487,6 +560,7 @@
static inline void clear_in_cr4(unsigned long mask)
{
unsigned cr4;
+
mmu_cr4_features &= ~mask;
cr4 = read_cr4();
cr4 &= ~mask;
@@ -494,42 +568,42 @@
}
struct microcode_header {
- unsigned int hdrver;
- unsigned int rev;
- unsigned int date;
- unsigned int sig;
- unsigned int cksum;
- unsigned int ldrver;
- unsigned int pf;
- unsigned int datasize;
- unsigned int totalsize;
- unsigned int reserved[3];
+ unsigned int hdrver;
+ unsigned int rev;
+ unsigned int date;
+ unsigned int sig;
+ unsigned int cksum;
+ unsigned int ldrver;
+ unsigned int pf;
+ unsigned int datasize;
+ unsigned int totalsize;
+ unsigned int reserved[3];
};
struct microcode {
- struct microcode_header hdr;
- unsigned int bits[0];
+ struct microcode_header hdr;
+ unsigned int bits[0];
};
-typedef struct microcode microcode_t;
-typedef struct microcode_header microcode_header_t;
+typedef struct microcode microcode_t;
+typedef struct microcode_header microcode_header_t;
/* microcode format is extended from prescott processors */
struct extended_signature {
- unsigned int sig;
- unsigned int pf;
- unsigned int cksum;
+ unsigned int sig;
+ unsigned int pf;
+ unsigned int cksum;
};
struct extended_sigtable {
- unsigned int count;
- unsigned int cksum;
- unsigned int reserved[3];
+ unsigned int count;
+ unsigned int cksum;
+ unsigned int reserved[3];
struct extended_signature sigs[0];
};
typedef struct {
- unsigned long seg;
+ unsigned long seg;
} mm_segment_t;
@@ -541,7 +615,7 @@
/* Free all resources held by a thread. */
extern void release_thread(struct task_struct *);
-/* Prepare to copy thread state - unlazy all lazy status */
+/* Prepare to copy thread state - unlazy all lazy state */
extern void prepare_to_copy(struct task_struct *tsk);
unsigned long get_wchan(struct task_struct *p);
@@ -578,118 +652,137 @@
unsigned int eax, ebx, ecx, edx;
cpuid(op, &eax, &ebx, &ecx, &edx);
+
return eax;
}
+
static inline unsigned int cpuid_ebx(unsigned int op)
{
unsigned int eax, ebx, ecx, edx;
cpuid(op, &eax, &ebx, &ecx, &edx);
+
return ebx;
}
+
static inline unsigned int cpuid_ecx(unsigned int op)
{
unsigned int eax, ebx, ecx, edx;
cpuid(op, &eax, &ebx, &ecx, &edx);
+
return ecx;
}
+
static inline unsigned int cpuid_edx(unsigned int op)
{
unsigned int eax, ebx, ecx, edx;
cpuid(op, &eax, &ebx, &ecx, &edx);
+
return edx;
}
/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
static inline void rep_nop(void)
{
- __asm__ __volatile__("rep;nop": : :"memory");
+ asm volatile("rep; nop" ::: "memory");
}
-/* Stop speculative execution */
+static inline void cpu_relax(void)
+{
+ rep_nop();
+}
+
+/* Stop speculative execution: */
static inline void sync_core(void)
{
int tmp;
+
asm volatile("cpuid" : "=a" (tmp) : "0" (1)
- : "ebx", "ecx", "edx", "memory");
+ : "ebx", "ecx", "edx", "memory");
}
-#define cpu_relax() rep_nop()
-
static inline void __monitor(const void *eax, unsigned long ecx,
- unsigned long edx)
+ unsigned long edx)
{
- /* "monitor %eax,%ecx,%edx;" */
- asm volatile(
- ".byte 0x0f,0x01,0xc8;"
- : :"a" (eax), "c" (ecx), "d"(edx));
+ /* "monitor %eax, %ecx, %edx;" */
+ asm volatile(".byte 0x0f, 0x01, 0xc8;"
+ :: "a" (eax), "c" (ecx), "d"(edx));
}
static inline void __mwait(unsigned long eax, unsigned long ecx)
{
- /* "mwait %eax,%ecx;" */
- asm volatile(
- ".byte 0x0f,0x01,0xc9;"
- : :"a" (eax), "c" (ecx));
+ /* "mwait %eax, %ecx;" */
+ asm volatile(".byte 0x0f, 0x01, 0xc9;"
+ :: "a" (eax), "c" (ecx));
}
static inline void __sti_mwait(unsigned long eax, unsigned long ecx)
{
- /* "mwait %eax,%ecx;" */
- asm volatile(
- "sti; .byte 0x0f,0x01,0xc9;"
- : :"a" (eax), "c" (ecx));
+ /* "mwait %eax, %ecx;" */
+ asm volatile("sti; .byte 0x0f, 0x01, 0xc9;"
+ :: "a" (eax), "c" (ecx));
}
extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx);
-extern int force_mwait;
+extern int force_mwait;
extern void select_idle_routine(const struct cpuinfo_x86 *c);
-extern unsigned long boot_option_idle_override;
+extern unsigned long boot_option_idle_override;
extern void enable_sep_cpu(void);
extern int sysenter_setup(void);
/* Defined in head.S */
-extern struct desc_ptr early_gdt_descr;
+extern struct desc_ptr early_gdt_descr;
extern void cpu_set_gdt(int);
extern void switch_to_new_gdt(void);
extern void cpu_init(void);
extern void init_gdt(int cpu);
-/* from system description table in BIOS. Mostly for MCA use, but
- * others may find it useful. */
-extern unsigned int machine_id;
-extern unsigned int machine_submodel_id;
-extern unsigned int BIOS_revision;
+static inline void update_debugctlmsr(unsigned long debugctlmsr)
+{
+#ifndef CONFIG_X86_DEBUGCTLMSR
+ if (boot_cpu_data.x86 < 6)
+ return;
+#endif
+ wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
+}
-/* Boot loader type from the setup header */
-extern int bootloader_type;
+/*
+ * from system description table in BIOS. Mostly for MCA use, but
+ * others may find it useful:
+ */
+extern unsigned int machine_id;
+extern unsigned int machine_submodel_id;
+extern unsigned int BIOS_revision;
-extern char ignore_fpu_irq;
-#define cache_line_size() (boot_cpu_data.x86_cache_alignment)
+/* Boot loader type from the setup header: */
+extern int bootloader_type;
+
+extern char ignore_fpu_irq;
#define HAVE_ARCH_PICK_MMAP_LAYOUT 1
#define ARCH_HAS_PREFETCHW
#define ARCH_HAS_SPINLOCK_PREFETCH
#ifdef CONFIG_X86_32
-#define BASE_PREFETCH ASM_NOP4
-#define ARCH_HAS_PREFETCH
+# define BASE_PREFETCH ASM_NOP4
+# define ARCH_HAS_PREFETCH
#else
-#define BASE_PREFETCH "prefetcht0 (%1)"
+# define BASE_PREFETCH "prefetcht0 (%1)"
#endif
-/* Prefetch instructions for Pentium III and AMD Athlon */
-/* It's not worth to care about 3dnow! prefetches for the K6
- because they are microcoded there and very slow.
- However we don't do prefetches for pre XP Athlons currently
- That should be fixed. */
+/*
+ * Prefetch instructions for Pentium III (+) and AMD Athlon (+)
+ *
+ * It's not worth to care about 3dnow prefetches for the K6
+ * because they are microcoded there and very slow.
+ */
static inline void prefetch(const void *x)
{
alternative_input(BASE_PREFETCH,
@@ -698,8 +791,11 @@
"r" (x));
}
-/* 3dnow! prefetch to get an exclusive cache line. Useful for
- spinlocks to avoid one state transition in the cache coherency protocol. */
+/*
+ * 3dnow prefetch to get an exclusive cache line.
+ * Useful for spinlocks to avoid one state transition in the
+ * cache coherency protocol:
+ */
static inline void prefetchw(const void *x)
{
alternative_input(BASE_PREFETCH,
@@ -708,21 +804,25 @@
"r" (x));
}
-#define spin_lock_prefetch(x) prefetchw(x)
+static inline void spin_lock_prefetch(const void *x)
+{
+ prefetchw(x);
+}
+
#ifdef CONFIG_X86_32
/*
* User space process size: 3GB (default).
*/
-#define TASK_SIZE (PAGE_OFFSET)
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
+#define TASK_SIZE PAGE_OFFSET
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
-#define INIT_THREAD { \
- .sp0 = sizeof(init_stack) + (long)&init_stack, \
- .vm86_info = NULL, \
- .sysenter_cs = __KERNEL_CS, \
- .io_bitmap_ptr = NULL, \
- .fs = __KERNEL_PERCPU, \
+#define INIT_THREAD { \
+ .sp0 = sizeof(init_stack) + (long)&init_stack, \
+ .vm86_info = NULL, \
+ .sysenter_cs = __KERNEL_CS, \
+ .io_bitmap_ptr = NULL, \
+ .fs = __KERNEL_PERCPU, \
}
/*
@@ -731,29 +831,16 @@
* permission bitmap. The extra byte must be all 1 bits, and must
* be within the limit.
*/
-#define INIT_TSS { \
- .x86_tss = { \
+#define INIT_TSS { \
+ .x86_tss = { \
.sp0 = sizeof(init_stack) + (long)&init_stack, \
- .ss0 = __KERNEL_DS, \
- .ss1 = __KERNEL_CS, \
- .io_bitmap_base = INVALID_IO_BITMAP_OFFSET, \
- }, \
- .io_bitmap = { [0 ... IO_BITMAP_LONGS] = ~0 }, \
+ .ss0 = __KERNEL_DS, \
+ .ss1 = __KERNEL_CS, \
+ .io_bitmap_base = INVALID_IO_BITMAP_OFFSET, \
+ }, \
+ .io_bitmap = { [0 ... IO_BITMAP_LONGS] = ~0 }, \
}
-#define start_thread(regs, new_eip, new_esp) do { \
- __asm__("movl %0,%%gs": :"r" (0)); \
- regs->fs = 0; \
- set_fs(USER_DS); \
- regs->ds = __USER_DS; \
- regs->es = __USER_DS; \
- regs->ss = __USER_DS; \
- regs->cs = __USER_CS; \
- regs->ip = new_eip; \
- regs->sp = new_esp; \
-} while (0)
-
-
extern unsigned long thread_saved_pc(struct task_struct *tsk);
#define THREAD_SIZE_LONGS (THREAD_SIZE/sizeof(unsigned long))
@@ -780,24 +867,24 @@
__regs__ - 1; \
})
-#define KSTK_ESP(task) (task_pt_regs(task)->sp)
+#define KSTK_ESP(task) (task_pt_regs(task)->sp)
#else
/*
* User space process size. 47bits minus one guard page.
*/
-#define TASK_SIZE64 (0x800000000000UL - 4096)
+#define TASK_SIZE64 ((1UL << 47) - PAGE_SIZE)
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
-#define IA32_PAGE_OFFSET ((current->personality & ADDR_LIMIT_3GB) ? \
- 0xc0000000 : 0xFFFFe000)
+#define IA32_PAGE_OFFSET ((current->personality & ADDR_LIMIT_3GB) ? \
+ 0xc0000000 : 0xFFFFe000)
-#define TASK_SIZE (test_thread_flag(TIF_IA32) ? \
- IA32_PAGE_OFFSET : TASK_SIZE64)
-#define TASK_SIZE_OF(child) ((test_tsk_thread_flag(child, TIF_IA32)) ? \
- IA32_PAGE_OFFSET : TASK_SIZE64)
+#define TASK_SIZE (test_thread_flag(TIF_IA32) ? \
+ IA32_PAGE_OFFSET : TASK_SIZE64)
+#define TASK_SIZE_OF(child) ((test_tsk_thread_flag(child, TIF_IA32)) ? \
+ IA32_PAGE_OFFSET : TASK_SIZE64)
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX TASK_SIZE64
@@ -810,33 +897,25 @@
.x86_tss.sp0 = (unsigned long)&init_stack + sizeof(init_stack) \
}
-#define start_thread(regs, new_rip, new_rsp) do { \
- asm volatile("movl %0,%%fs; movl %0,%%es; movl %0,%%ds": :"r" (0)); \
- load_gs_index(0); \
- (regs)->ip = (new_rip); \
- (regs)->sp = (new_rsp); \
- write_pda(oldrsp, (new_rsp)); \
- (regs)->cs = __USER_CS; \
- (regs)->ss = __USER_DS; \
- (regs)->flags = 0x200; \
- set_fs(USER_DS); \
-} while (0)
-
/*
* Return saved PC of a blocked thread.
* What is this good for? it will be always the scheduler or ret_from_fork.
*/
-#define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8))
+#define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8))
-#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1)
-#define KSTK_ESP(tsk) -1 /* sorry. doesn't work for syscall. */
+#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1)
+#define KSTK_ESP(tsk) -1 /* sorry. doesn't work for syscall. */
#endif /* CONFIG_X86_64 */
-/* This decides where the kernel will search for a free chunk of vm
+extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
+ unsigned long new_sp);
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3))
-#define KSTK_EIP(task) (task_pt_regs(task)->ip)
+#define KSTK_EIP(task) (task_pt_regs(task)->ip)
#endif
diff --git a/include/asm-x86/proto.h b/include/asm-x86/proto.h
index 68563c0..1e17bcc 100644
--- a/include/asm-x86/proto.h
+++ b/include/asm-x86/proto.h
@@ -7,8 +7,6 @@
extern void early_idt_handler(void);
-extern void init_memory_mapping(unsigned long start, unsigned long end);
-
extern void system_call(void);
extern void syscall_init(void);
@@ -26,7 +24,7 @@
long do_arch_prctl(struct task_struct *task, int code, unsigned long addr);
-#define round_up(x,y) (((x) + (y) - 1) & ~((y)-1))
-#define round_down(x,y) ((x) & ~((y)-1))
+#define round_up(x, y) (((x) + (y) - 1) & ~((y) - 1))
+#define round_down(x, y) ((x) & ~((y) - 1))
#endif
diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h
index d9e04b4..24ec061 100644
--- a/include/asm-x86/ptrace.h
+++ b/include/asm-x86/ptrace.h
@@ -36,23 +36,23 @@
#else /* __KERNEL__ */
struct pt_regs {
- long bx;
- long cx;
- long dx;
- long si;
- long di;
- long bp;
- long ax;
- int ds;
- int es;
- int fs;
+ unsigned long bx;
+ unsigned long cx;
+ unsigned long dx;
+ unsigned long si;
+ unsigned long di;
+ unsigned long bp;
+ unsigned long ax;
+ unsigned long ds;
+ unsigned long es;
+ unsigned long fs;
/* int gs; */
- long orig_ax;
- long ip;
- int cs;
- long flags;
- long sp;
- int ss;
+ unsigned long orig_ax;
+ unsigned long ip;
+ unsigned long cs;
+ unsigned long flags;
+ unsigned long sp;
+ unsigned long ss;
};
#include <asm/vm86.h>
@@ -140,12 +140,16 @@
convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs);
#ifdef CONFIG_X86_32
-extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code);
+extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
+ int error_code);
#else
void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
#endif
-#define regs_return_value(regs) ((regs)->ax)
+static inline unsigned long regs_return_value(struct pt_regs *regs)
+{
+ return regs->ax;
+}
/*
* user_mode_vm(regs) determines whether a register set came from user mode.
@@ -166,8 +170,8 @@
static inline int user_mode_vm(struct pt_regs *regs)
{
#ifdef CONFIG_X86_32
- return ((regs->cs & SEGMENT_RPL_MASK) |
- (regs->flags & VM_MASK)) >= USER_RPL;
+ return ((regs->cs & SEGMENT_RPL_MASK) | (regs->flags & X86_VM_MASK)) >=
+ USER_RPL;
#else
return user_mode(regs);
#endif
@@ -176,7 +180,7 @@
static inline int v8086_mode(struct pt_regs *regs)
{
#ifdef CONFIG_X86_32
- return (regs->flags & VM_MASK);
+ return (regs->flags & X86_VM_MASK);
#else
return 0; /* No V86 mode support in long mode */
#endif
diff --git a/include/asm-x86/reboot.h b/include/asm-x86/reboot.h
index e9e3ffc..6b5233b 100644
--- a/include/asm-x86/reboot.h
+++ b/include/asm-x86/reboot.h
@@ -3,8 +3,7 @@
struct pt_regs;
-struct machine_ops
-{
+struct machine_ops {
void (*restart)(char *cmd);
void (*halt)(void);
void (*power_off)(void);
diff --git a/include/asm-x86/resume-trace.h b/include/asm-x86/resume-trace.h
index 46f725b..2557514 100644
--- a/include/asm-x86/resume-trace.h
+++ b/include/asm-x86/resume-trace.h
@@ -3,16 +3,17 @@
#include <asm/asm.h>
-#define TRACE_RESUME(user) do { \
+#define TRACE_RESUME(user) \
+do { \
if (pm_trace_enabled) { \
void *tracedata; \
asm volatile(_ASM_MOV_UL " $1f,%0\n" \
- ".section .tracedata,\"a\"\n" \
- "1:\t.word %c1\n\t" \
- _ASM_PTR " %c2\n" \
- ".previous" \
- :"=r" (tracedata) \
- : "i" (__LINE__), "i" (__FILE__)); \
+ ".section .tracedata,\"a\"\n" \
+ "1:\t.word %c1\n\t" \
+ _ASM_PTR " %c2\n" \
+ ".previous" \
+ :"=r" (tracedata) \
+ : "i" (__LINE__), "i" (__FILE__)); \
generate_resume_trace(tracedata, user); \
} \
} while (0)
diff --git a/include/asm-x86/rio.h b/include/asm-x86/rio.h
index 97cdcc9..3451c57 100644
--- a/include/asm-x86/rio.h
+++ b/include/asm-x86/rio.h
@@ -11,53 +11,53 @@
#define RIO_TABLE_VERSION 3
struct rio_table_hdr {
- u8 version; /* Version number of this data structure */
- u8 num_scal_dev; /* # of Scalability devices */
- u8 num_rio_dev; /* # of RIO I/O devices */
+ u8 version; /* Version number of this data structure */
+ u8 num_scal_dev; /* # of Scalability devices */
+ u8 num_rio_dev; /* # of RIO I/O devices */
} __attribute__((packed));
struct scal_detail {
- u8 node_id; /* Scalability Node ID */
- u32 CBAR; /* Address of 1MB register space */
- u8 port0node; /* Node ID port connected to: 0xFF=None */
- u8 port0port; /* Port num port connected to: 0,1,2, or */
- /* 0xFF=None */
- u8 port1node; /* Node ID port connected to: 0xFF = None */
- u8 port1port; /* Port num port connected to: 0,1,2, or */
- /* 0xFF=None */
- u8 port2node; /* Node ID port connected to: 0xFF = None */
- u8 port2port; /* Port num port connected to: 0,1,2, or */
- /* 0xFF=None */
- u8 chassis_num; /* 1 based Chassis number (1 = boot node) */
+ u8 node_id; /* Scalability Node ID */
+ u32 CBAR; /* Address of 1MB register space */
+ u8 port0node; /* Node ID port connected to: 0xFF=None */
+ u8 port0port; /* Port num port connected to: 0,1,2, or */
+ /* 0xFF=None */
+ u8 port1node; /* Node ID port connected to: 0xFF = None */
+ u8 port1port; /* Port num port connected to: 0,1,2, or */
+ /* 0xFF=None */
+ u8 port2node; /* Node ID port connected to: 0xFF = None */
+ u8 port2port; /* Port num port connected to: 0,1,2, or */
+ /* 0xFF=None */
+ u8 chassis_num; /* 1 based Chassis number (1 = boot node) */
} __attribute__((packed));
struct rio_detail {
- u8 node_id; /* RIO Node ID */
- u32 BBAR; /* Address of 1MB register space */
- u8 type; /* Type of device */
- u8 owner_id; /* Node ID of Hurricane that owns this */
- /* node */
- u8 port0node; /* Node ID port connected to: 0xFF=None */
- u8 port0port; /* Port num port connected to: 0,1,2, or */
- /* 0xFF=None */
- u8 port1node; /* Node ID port connected to: 0xFF=None */
- u8 port1port; /* Port num port connected to: 0,1,2, or */
- /* 0xFF=None */
- u8 first_slot; /* Lowest slot number below this Calgary */
- u8 status; /* Bit 0 = 1 : the XAPIC is used */
- /* = 0 : the XAPIC is not used, ie: */
- /* ints fwded to another XAPIC */
- /* Bits1:7 Reserved */
- u8 WP_index; /* instance index - lower ones have */
- /* lower slot numbers/PCI bus numbers */
- u8 chassis_num; /* 1 based Chassis number */
+ u8 node_id; /* RIO Node ID */
+ u32 BBAR; /* Address of 1MB register space */
+ u8 type; /* Type of device */
+ u8 owner_id; /* Node ID of Hurricane that owns this */
+ /* node */
+ u8 port0node; /* Node ID port connected to: 0xFF=None */
+ u8 port0port; /* Port num port connected to: 0,1,2, or */
+ /* 0xFF=None */
+ u8 port1node; /* Node ID port connected to: 0xFF=None */
+ u8 port1port; /* Port num port connected to: 0,1,2, or */
+ /* 0xFF=None */
+ u8 first_slot; /* Lowest slot number below this Calgary */
+ u8 status; /* Bit 0 = 1 : the XAPIC is used */
+ /* = 0 : the XAPIC is not used, ie: */
+ /* ints fwded to another XAPIC */
+ /* Bits1:7 Reserved */
+ u8 WP_index; /* instance index - lower ones have */
+ /* lower slot numbers/PCI bus numbers */
+ u8 chassis_num; /* 1 based Chassis number */
} __attribute__((packed));
enum {
- HURR_SCALABILTY = 0, /* Hurricane Scalability info */
- HURR_RIOIB = 2, /* Hurricane RIOIB info */
- COMPAT_CALGARY = 4, /* Compatibility Calgary */
- ALT_CALGARY = 5, /* Second Planar Calgary */
+ HURR_SCALABILTY = 0, /* Hurricane Scalability info */
+ HURR_RIOIB = 2, /* Hurricane RIOIB info */
+ COMPAT_CALGARY = 4, /* Compatibility Calgary */
+ ALT_CALGARY = 5, /* Second Planar Calgary */
};
/*
diff --git a/include/asm-x86/rwsem.h b/include/asm-x86/rwsem.h
index 520a379..750f2a3 100644
--- a/include/asm-x86/rwsem.h
+++ b/include/asm-x86/rwsem.h
@@ -56,14 +56,16 @@
/*
* the semaphore definition
*/
-struct rw_semaphore {
- signed long count;
+
#define RWSEM_UNLOCKED_VALUE 0x00000000
#define RWSEM_ACTIVE_BIAS 0x00000001
#define RWSEM_ACTIVE_MASK 0x0000ffff
#define RWSEM_WAITING_BIAS (-0x00010000)
#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS
#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+struct rw_semaphore {
+ signed long count;
spinlock_t wait_lock;
struct list_head wait_list;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
@@ -78,11 +80,13 @@
#endif
-#define __RWSEM_INITIALIZER(name) \
-{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
- LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
+#define __RWSEM_INITIALIZER(name) \
+{ \
+ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+ LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) \
+}
-#define DECLARE_RWSEM(name) \
+#define DECLARE_RWSEM(name) \
struct rw_semaphore name = __RWSEM_INITIALIZER(name)
extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
@@ -100,16 +104,16 @@
*/
static inline void __down_read(struct rw_semaphore *sem)
{
- __asm__ __volatile__(
- "# beginning down_read\n\t"
-LOCK_PREFIX " incl (%%eax)\n\t" /* adds 0x00000001, returns the old value */
- " jns 1f\n"
- " call call_rwsem_down_read_failed\n"
- "1:\n\t"
- "# ending down_read\n\t"
- : "+m" (sem->count)
- : "a" (sem)
- : "memory", "cc");
+ asm volatile("# beginning down_read\n\t"
+ LOCK_PREFIX " incl (%%eax)\n\t"
+ /* adds 0x00000001, returns the old value */
+ " jns 1f\n"
+ " call call_rwsem_down_read_failed\n"
+ "1:\n\t"
+ "# ending down_read\n\t"
+ : "+m" (sem->count)
+ : "a" (sem)
+ : "memory", "cc");
}
/*
@@ -118,21 +122,20 @@
static inline int __down_read_trylock(struct rw_semaphore *sem)
{
__s32 result, tmp;
- __asm__ __volatile__(
- "# beginning __down_read_trylock\n\t"
- " movl %0,%1\n\t"
- "1:\n\t"
- " movl %1,%2\n\t"
- " addl %3,%2\n\t"
- " jle 2f\n\t"
-LOCK_PREFIX " cmpxchgl %2,%0\n\t"
- " jnz 1b\n\t"
- "2:\n\t"
- "# ending __down_read_trylock\n\t"
- : "+m" (sem->count), "=&a" (result), "=&r" (tmp)
- : "i" (RWSEM_ACTIVE_READ_BIAS)
- : "memory", "cc");
- return result>=0 ? 1 : 0;
+ asm volatile("# beginning __down_read_trylock\n\t"
+ " movl %0,%1\n\t"
+ "1:\n\t"
+ " movl %1,%2\n\t"
+ " addl %3,%2\n\t"
+ " jle 2f\n\t"
+ LOCK_PREFIX " cmpxchgl %2,%0\n\t"
+ " jnz 1b\n\t"
+ "2:\n\t"
+ "# ending __down_read_trylock\n\t"
+ : "+m" (sem->count), "=&a" (result), "=&r" (tmp)
+ : "i" (RWSEM_ACTIVE_READ_BIAS)
+ : "memory", "cc");
+ return result >= 0 ? 1 : 0;
}
/*
@@ -143,17 +146,18 @@
int tmp;
tmp = RWSEM_ACTIVE_WRITE_BIAS;
- __asm__ __volatile__(
- "# beginning down_write\n\t"
-LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtract 0x0000ffff, returns the old value */
- " testl %%edx,%%edx\n\t" /* was the count 0 before? */
- " jz 1f\n"
- " call call_rwsem_down_write_failed\n"
- "1:\n"
- "# ending down_write"
- : "+m" (sem->count), "=d" (tmp)
- : "a" (sem), "1" (tmp)
- : "memory", "cc");
+ asm volatile("# beginning down_write\n\t"
+ LOCK_PREFIX " xadd %%edx,(%%eax)\n\t"
+ /* subtract 0x0000ffff, returns the old value */
+ " testl %%edx,%%edx\n\t"
+ /* was the count 0 before? */
+ " jz 1f\n"
+ " call call_rwsem_down_write_failed\n"
+ "1:\n"
+ "# ending down_write"
+ : "+m" (sem->count), "=d" (tmp)
+ : "a" (sem), "1" (tmp)
+ : "memory", "cc");
}
static inline void __down_write(struct rw_semaphore *sem)
@@ -167,7 +171,7 @@
static inline int __down_write_trylock(struct rw_semaphore *sem)
{
signed long ret = cmpxchg(&sem->count,
- RWSEM_UNLOCKED_VALUE,
+ RWSEM_UNLOCKED_VALUE,
RWSEM_ACTIVE_WRITE_BIAS);
if (ret == RWSEM_UNLOCKED_VALUE)
return 1;
@@ -180,16 +184,16 @@
static inline void __up_read(struct rw_semaphore *sem)
{
__s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
- __asm__ __volatile__(
- "# beginning __up_read\n\t"
-LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtracts 1, returns the old value */
- " jns 1f\n\t"
- " call call_rwsem_wake\n"
- "1:\n"
- "# ending __up_read\n"
- : "+m" (sem->count), "=d" (tmp)
- : "a" (sem), "1" (tmp)
- : "memory", "cc");
+ asm volatile("# beginning __up_read\n\t"
+ LOCK_PREFIX " xadd %%edx,(%%eax)\n\t"
+ /* subtracts 1, returns the old value */
+ " jns 1f\n\t"
+ " call call_rwsem_wake\n"
+ "1:\n"
+ "# ending __up_read\n"
+ : "+m" (sem->count), "=d" (tmp)
+ : "a" (sem), "1" (tmp)
+ : "memory", "cc");
}
/*
@@ -197,17 +201,18 @@
*/
static inline void __up_write(struct rw_semaphore *sem)
{
- __asm__ __volatile__(
- "# beginning __up_write\n\t"
- " movl %2,%%edx\n\t"
-LOCK_PREFIX " xaddl %%edx,(%%eax)\n\t" /* tries to transition 0xffff0001 -> 0x00000000 */
- " jz 1f\n"
- " call call_rwsem_wake\n"
- "1:\n\t"
- "# ending __up_write\n"
- : "+m" (sem->count)
- : "a" (sem), "i" (-RWSEM_ACTIVE_WRITE_BIAS)
- : "memory", "cc", "edx");
+ asm volatile("# beginning __up_write\n\t"
+ " movl %2,%%edx\n\t"
+ LOCK_PREFIX " xaddl %%edx,(%%eax)\n\t"
+ /* tries to transition
+ 0xffff0001 -> 0x00000000 */
+ " jz 1f\n"
+ " call call_rwsem_wake\n"
+ "1:\n\t"
+ "# ending __up_write\n"
+ : "+m" (sem->count)
+ : "a" (sem), "i" (-RWSEM_ACTIVE_WRITE_BIAS)
+ : "memory", "cc", "edx");
}
/*
@@ -215,16 +220,16 @@
*/
static inline void __downgrade_write(struct rw_semaphore *sem)
{
- __asm__ __volatile__(
- "# beginning __downgrade_write\n\t"
-LOCK_PREFIX " addl %2,(%%eax)\n\t" /* transitions 0xZZZZ0001 -> 0xYYYY0001 */
- " jns 1f\n\t"
- " call call_rwsem_downgrade_wake\n"
- "1:\n\t"
- "# ending __downgrade_write\n"
- : "+m" (sem->count)
- : "a" (sem), "i" (-RWSEM_WAITING_BIAS)
- : "memory", "cc");
+ asm volatile("# beginning __downgrade_write\n\t"
+ LOCK_PREFIX " addl %2,(%%eax)\n\t"
+ /* transitions 0xZZZZ0001 -> 0xYYYY0001 */
+ " jns 1f\n\t"
+ " call call_rwsem_downgrade_wake\n"
+ "1:\n\t"
+ "# ending __downgrade_write\n"
+ : "+m" (sem->count)
+ : "a" (sem), "i" (-RWSEM_WAITING_BIAS)
+ : "memory", "cc");
}
/*
@@ -232,10 +237,9 @@
*/
static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
{
- __asm__ __volatile__(
-LOCK_PREFIX "addl %1,%0"
- : "+m" (sem->count)
- : "ir" (delta));
+ asm volatile(LOCK_PREFIX "addl %1,%0"
+ : "+m" (sem->count)
+ : "ir" (delta));
}
/*
@@ -245,12 +249,11 @@
{
int tmp = delta;
- __asm__ __volatile__(
-LOCK_PREFIX "xadd %0,%1"
- : "+r" (tmp), "+m" (sem->count)
- : : "memory");
+ asm volatile(LOCK_PREFIX "xadd %0,%1"
+ : "+r" (tmp), "+m" (sem->count)
+ : : "memory");
- return tmp+delta;
+ return tmp + delta;
}
static inline int rwsem_is_locked(struct rw_semaphore *sem)
diff --git a/include/asm-x86/segment.h b/include/asm-x86/segment.h
index 23f0535..ed5131d 100644
--- a/include/asm-x86/segment.h
+++ b/include/asm-x86/segment.h
@@ -191,13 +191,14 @@
#define SEGMENT_TI_MASK 0x4
#define IDT_ENTRIES 256
+#define NUM_EXCEPTION_VECTORS 32
#define GDT_SIZE (GDT_ENTRIES * 8)
#define GDT_ENTRY_TLS_ENTRIES 3
#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
-extern const char early_idt_handlers[IDT_ENTRIES][10];
+extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][10];
#endif
#endif
diff --git a/include/asm-x86/semaphore.h b/include/asm-x86/semaphore.h
index 572c0b6..d9b2034 100644
--- a/include/asm-x86/semaphore.h
+++ b/include/asm-x86/semaphore.h
@@ -1,5 +1 @@
-#ifdef CONFIG_X86_32
-# include "semaphore_32.h"
-#else
-# include "semaphore_64.h"
-#endif
+#include <linux/semaphore.h>
diff --git a/include/asm-x86/semaphore_32.h b/include/asm-x86/semaphore_32.h
deleted file mode 100644
index ac96d38..0000000
--- a/include/asm-x86/semaphore_32.h
+++ /dev/null
@@ -1,175 +0,0 @@
-#ifndef _I386_SEMAPHORE_H
-#define _I386_SEMAPHORE_H
-
-#include <linux/linkage.h>
-
-#ifdef __KERNEL__
-
-/*
- * SMP- and interrupt-safe semaphores..
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * Modified 1996-12-23 by Dave Grothe <dave@gcom.com> to fix bugs in
- * the original code and to make semaphore waits
- * interruptible so that processes waiting on
- * semaphores can be killed.
- * Modified 1999-02-14 by Andrea Arcangeli, split the sched.c helper
- * functions in asm/sempahore-helper.h while fixing a
- * potential and subtle race discovered by Ulrich Schmid
- * in down_interruptible(). Since I started to play here I
- * also implemented the `trylock' semaphore operation.
- * 1999-07-02 Artur Skawina <skawina@geocities.com>
- * Optimized "0(ecx)" -> "(ecx)" (the assembler does not
- * do this). Changed calling sequences from push/jmp to
- * traditional call/ret.
- * Modified 2001-01-01 Andreas Franck <afranck@gmx.de>
- * Some hacks to ensure compatibility with recent
- * GCC snapshots, to avoid stack corruption when compiling
- * with -fomit-frame-pointer. It's not sure if this will
- * be fixed in GCC, as our previous implementation was a
- * bit dubious.
- *
- * If you would like to see an analysis of this implementation, please
- * ftp to gcom.com and download the file
- * /pub/linux/src/semaphore/semaphore-2.0.24.tar.gz.
- *
- */
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .sleepers = 0, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
-/*
- * *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
- *
- * i'd rather use the more flexible initialization above, but sadly
- * GCC 2.7.2.3 emits a bogus warning. EGCS doesn't. Oh well.
- */
- atomic_set(&sem->count, val);
- sem->sleepers = 0;
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-extern asmregparm void __down_failed(atomic_t *count_ptr);
-extern asmregparm int __down_failed_interruptible(atomic_t *count_ptr);
-extern asmregparm int __down_failed_trylock(atomic_t *count_ptr);
-extern asmregparm void __up_wakeup(atomic_t *count_ptr);
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "__down_failed" is a special asm handler that calls the C
- * routine that actually waits. See arch/i386/kernel/semaphore.c
- */
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
- __asm__ __volatile__(
- "# atomic down operation\n\t"
- LOCK_PREFIX "decl %0\n\t" /* --sem->count */
- "jns 2f\n"
- "\tlea %0,%%eax\n\t"
- "call __down_failed\n"
- "2:"
- :"+m" (sem->count)
- :
- :"memory","ax");
-}
-
-/*
- * Interruptible try to acquire a semaphore. If we obtained
- * it, return zero. If we were interrupted, returns -EINTR
- */
-static inline int down_interruptible(struct semaphore * sem)
-{
- int result;
-
- might_sleep();
- __asm__ __volatile__(
- "# atomic interruptible down operation\n\t"
- "xorl %0,%0\n\t"
- LOCK_PREFIX "decl %1\n\t" /* --sem->count */
- "jns 2f\n\t"
- "lea %1,%%eax\n\t"
- "call __down_failed_interruptible\n"
- "2:"
- :"=&a" (result), "+m" (sem->count)
- :
- :"memory");
- return result;
-}
-
-/*
- * Non-blockingly attempt to down() a semaphore.
- * Returns zero if we acquired it
- */
-static inline int down_trylock(struct semaphore * sem)
-{
- int result;
-
- __asm__ __volatile__(
- "# atomic interruptible down operation\n\t"
- "xorl %0,%0\n\t"
- LOCK_PREFIX "decl %1\n\t" /* --sem->count */
- "jns 2f\n\t"
- "lea %1,%%eax\n\t"
- "call __down_failed_trylock\n\t"
- "2:\n"
- :"=&a" (result), "+m" (sem->count)
- :
- :"memory");
- return result;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- */
-static inline void up(struct semaphore * sem)
-{
- __asm__ __volatile__(
- "# atomic up operation\n\t"
- LOCK_PREFIX "incl %0\n\t" /* ++sem->count */
- "jg 1f\n\t"
- "lea %0,%%eax\n\t"
- "call __up_wakeup\n"
- "1:"
- :"+m" (sem->count)
- :
- :"memory","ax");
-}
-
-#endif
-#endif
diff --git a/include/asm-x86/semaphore_64.h b/include/asm-x86/semaphore_64.h
deleted file mode 100644
index 7969430..0000000
--- a/include/asm-x86/semaphore_64.h
+++ /dev/null
@@ -1,180 +0,0 @@
-#ifndef _X86_64_SEMAPHORE_H
-#define _X86_64_SEMAPHORE_H
-
-#include <linux/linkage.h>
-
-#ifdef __KERNEL__
-
-/*
- * SMP- and interrupt-safe semaphores..
- *
- * (C) Copyright 1996 Linus Torvalds
- *
- * Modified 1996-12-23 by Dave Grothe <dave@gcom.com> to fix bugs in
- * the original code and to make semaphore waits
- * interruptible so that processes waiting on
- * semaphores can be killed.
- * Modified 1999-02-14 by Andrea Arcangeli, split the sched.c helper
- * functions in asm/sempahore-helper.h while fixing a
- * potential and subtle race discovered by Ulrich Schmid
- * in down_interruptible(). Since I started to play here I
- * also implemented the `trylock' semaphore operation.
- * 1999-07-02 Artur Skawina <skawina@geocities.com>
- * Optimized "0(ecx)" -> "(ecx)" (the assembler does not
- * do this). Changed calling sequences from push/jmp to
- * traditional call/ret.
- * Modified 2001-01-01 Andreas Franck <afranck@gmx.de>
- * Some hacks to ensure compatibility with recent
- * GCC snapshots, to avoid stack corruption when compiling
- * with -fomit-frame-pointer. It's not sure if this will
- * be fixed in GCC, as our previous implementation was a
- * bit dubious.
- *
- * If you would like to see an analysis of this implementation, please
- * ftp to gcom.com and download the file
- * /pub/linux/src/semaphore/semaphore-2.0.24.tar.gz.
- *
- */
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/rwlock.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-#include <linux/stringify.h>
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name, n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .sleepers = 0, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
-/*
- * *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
- *
- * i'd rather use the more flexible initialization above, but sadly
- * GCC 2.7.2.3 emits a bogus warning. EGCS doesn't. Oh well.
- */
- atomic_set(&sem->count, val);
- sem->sleepers = 0;
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-asmlinkage void __down_failed(void /* special register calling convention */);
-asmlinkage int __down_failed_interruptible(void /* params in registers */);
-asmlinkage int __down_failed_trylock(void /* params in registers */);
-asmlinkage void __up_wakeup(void /* special register calling convention */);
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage int __down_trylock(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-/*
- * This is ugly, but we want the default case to fall through.
- * "__down_failed" is a special asm handler that calls the C
- * routine that actually waits. See arch/x86_64/kernel/semaphore.c
- */
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
-
- __asm__ __volatile__(
- "# atomic down operation\n\t"
- LOCK_PREFIX "decl %0\n\t" /* --sem->count */
- "jns 1f\n\t"
- "call __down_failed\n"
- "1:"
- :"=m" (sem->count)
- :"D" (sem)
- :"memory");
-}
-
-/*
- * Interruptible try to acquire a semaphore. If we obtained
- * it, return zero. If we were interrupted, returns -EINTR
- */
-static inline int down_interruptible(struct semaphore * sem)
-{
- int result;
-
- might_sleep();
-
- __asm__ __volatile__(
- "# atomic interruptible down operation\n\t"
- "xorl %0,%0\n\t"
- LOCK_PREFIX "decl %1\n\t" /* --sem->count */
- "jns 2f\n\t"
- "call __down_failed_interruptible\n"
- "2:\n"
- :"=&a" (result), "=m" (sem->count)
- :"D" (sem)
- :"memory");
- return result;
-}
-
-/*
- * Non-blockingly attempt to down() a semaphore.
- * Returns zero if we acquired it
- */
-static inline int down_trylock(struct semaphore * sem)
-{
- int result;
-
- __asm__ __volatile__(
- "# atomic interruptible down operation\n\t"
- "xorl %0,%0\n\t"
- LOCK_PREFIX "decl %1\n\t" /* --sem->count */
- "jns 2f\n\t"
- "call __down_failed_trylock\n\t"
- "2:\n"
- :"=&a" (result), "=m" (sem->count)
- :"D" (sem)
- :"memory","cc");
- return result;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- * The default case (no contention) will result in NO
- * jumps for both down() and up().
- */
-static inline void up(struct semaphore * sem)
-{
- __asm__ __volatile__(
- "# atomic up operation\n\t"
- LOCK_PREFIX "incl %0\n\t" /* ++sem->count */
- "jg 1f\n\t"
- "call __up_wakeup\n"
- "1:"
- :"=m" (sem->count)
- :"D" (sem)
- :"memory");
-}
-#endif /* __KERNEL__ */
-#endif
diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h
index 071e054..fa6763a 100644
--- a/include/asm-x86/setup.h
+++ b/include/asm-x86/setup.h
@@ -4,6 +4,10 @@
#define COMMAND_LINE_SIZE 2048
#ifndef __ASSEMBLY__
+
+/* Interrupt control for vSMPowered x86_64 systems */
+void vsmp_init(void);
+
char *machine_specific_memory_setup(void);
#ifndef CONFIG_PARAVIRT
#define paravirt_post_allocator_init() do {} while (0)
@@ -51,8 +55,8 @@
char * __init machine_specific_memory_setup(void);
char *memory_setup(void);
-int __init copy_e820_map(struct e820entry * biosmap, int nr_map);
-int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map);
+int __init copy_e820_map(struct e820entry *biosmap, int nr_map);
+int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map);
void __init add_memory_region(unsigned long long start,
unsigned long long size, int type);
diff --git a/include/asm-x86/sigcontext.h b/include/asm-x86/sigcontext.h
index d743947..2f9c884 100644
--- a/include/asm-x86/sigcontext.h
+++ b/include/asm-x86/sigcontext.h
@@ -79,7 +79,7 @@
unsigned long flags;
unsigned long sp_at_signal;
unsigned short ss, __ssh;
- struct _fpstate __user * fpstate;
+ struct _fpstate __user *fpstate;
unsigned long oldmask;
unsigned long cr2;
};
@@ -107,7 +107,7 @@
unsigned long eflags;
unsigned long esp_at_signal;
unsigned short ss, __ssh;
- struct _fpstate __user * fpstate;
+ struct _fpstate __user *fpstate;
unsigned long oldmask;
unsigned long cr2;
};
@@ -121,7 +121,8 @@
struct _fpstate {
__u16 cwd;
__u16 swd;
- __u16 twd; /* Note this is not the same as the 32bit/x87/FSAVE twd */
+ __u16 twd; /* Note this is not the same as the
+ 32bit/x87/FSAVE twd */
__u16 fop;
__u64 rip;
__u64 rdp;
diff --git a/include/asm-x86/sigcontext32.h b/include/asm-x86/sigcontext32.h
index 6ffab4f..57a9686 100644
--- a/include/asm-x86/sigcontext32.h
+++ b/include/asm-x86/sigcontext32.h
@@ -26,7 +26,7 @@
__u32 cw;
__u32 sw;
__u32 tag; /* not compatible to 64bit twd */
- __u32 ipoff;
+ __u32 ipoff;
__u32 cssel;
__u32 dataoff;
__u32 datasel;
@@ -39,7 +39,7 @@
__u32 mxcsr;
__u32 reserved;
struct _fpxreg _fxsr_st[8];
- struct _xmmreg _xmm[8]; /* It's actually 16 */
+ struct _xmmreg _xmm[8]; /* It's actually 16 */
__u32 padding[56];
};
diff --git a/include/asm-x86/signal.h b/include/asm-x86/signal.h
index aee7eca..f15186d 100644
--- a/include/asm-x86/signal.h
+++ b/include/asm-x86/signal.h
@@ -185,61 +185,61 @@
#define __HAVE_ARCH_SIG_BITOPS
-#define sigaddset(set,sig) \
- (__builtin_constantp(sig) ? \
- __const_sigaddset((set),(sig)) : \
- __gen_sigaddset((set),(sig)))
+#define sigaddset(set,sig) \
+ (__builtin_constantp(sig) \
+ ? __const_sigaddset((set), (sig)) \
+ : __gen_sigaddset((set), (sig)))
-static __inline__ void __gen_sigaddset(sigset_t *set, int _sig)
+static inline void __gen_sigaddset(sigset_t *set, int _sig)
{
- __asm__("btsl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
+ asm("btsl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
}
-static __inline__ void __const_sigaddset(sigset_t *set, int _sig)
+static inline void __const_sigaddset(sigset_t *set, int _sig)
{
unsigned long sig = _sig - 1;
set->sig[sig / _NSIG_BPW] |= 1 << (sig % _NSIG_BPW);
}
-#define sigdelset(set,sig) \
- (__builtin_constant_p(sig) ? \
- __const_sigdelset((set),(sig)) : \
- __gen_sigdelset((set),(sig)))
+#define sigdelset(set, sig) \
+ (__builtin_constant_p(sig) \
+ ? __const_sigdelset((set), (sig)) \
+ : __gen_sigdelset((set), (sig)))
-static __inline__ void __gen_sigdelset(sigset_t *set, int _sig)
+static inline void __gen_sigdelset(sigset_t *set, int _sig)
{
- __asm__("btrl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
+ asm("btrl %1,%0" : "+m"(*set) : "Ir"(_sig - 1) : "cc");
}
-static __inline__ void __const_sigdelset(sigset_t *set, int _sig)
+static inline void __const_sigdelset(sigset_t *set, int _sig)
{
unsigned long sig = _sig - 1;
set->sig[sig / _NSIG_BPW] &= ~(1 << (sig % _NSIG_BPW));
}
-static __inline__ int __const_sigismember(sigset_t *set, int _sig)
+static inline int __const_sigismember(sigset_t *set, int _sig)
{
unsigned long sig = _sig - 1;
return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
}
-static __inline__ int __gen_sigismember(sigset_t *set, int _sig)
+static inline int __gen_sigismember(sigset_t *set, int _sig)
{
int ret;
- __asm__("btl %2,%1\n\tsbbl %0,%0"
- : "=r"(ret) : "m"(*set), "Ir"(_sig-1) : "cc");
+ asm("btl %2,%1\n\tsbbl %0,%0"
+ : "=r"(ret) : "m"(*set), "Ir"(_sig-1) : "cc");
return ret;
}
-#define sigismember(set,sig) \
- (__builtin_constant_p(sig) ? \
- __const_sigismember((set),(sig)) : \
- __gen_sigismember((set),(sig)))
+#define sigismember(set, sig) \
+ (__builtin_constant_p(sig) \
+ ? __const_sigismember((set), (sig)) \
+ : __gen_sigismember((set), (sig)))
-static __inline__ int sigfindinword(unsigned long word)
+static inline int sigfindinword(unsigned long word)
{
- __asm__("bsfl %1,%0" : "=r"(word) : "rm"(word) : "cc");
+ asm("bsfl %1,%0" : "=r"(word) : "rm"(word) : "cc");
return word;
}
diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h
index f2e8319..62ebdec3 100644
--- a/include/asm-x86/smp.h
+++ b/include/asm-x86/smp.h
@@ -1,5 +1,209 @@
-#ifdef CONFIG_X86_32
-# include "smp_32.h"
+#ifndef _ASM_X86_SMP_H_
+#define _ASM_X86_SMP_H_
+#ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <asm/percpu.h>
+
+/*
+ * We need the APIC definitions automatically as part of 'smp.h'
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+# include <asm/mpspec.h>
+# include <asm/apic.h>
+# ifdef CONFIG_X86_IO_APIC
+# include <asm/io_apic.h>
+# endif
+#endif
+#include <asm/pda.h>
+#include <asm/thread_info.h>
+
+extern cpumask_t cpu_callout_map;
+extern cpumask_t cpu_initialized;
+extern cpumask_t cpu_callin_map;
+
+extern void (*mtrr_hook)(void);
+extern void zap_low_mappings(void);
+
+extern int smp_num_siblings;
+extern unsigned int num_processors;
+extern cpumask_t cpu_initialized;
+
+#ifdef CONFIG_SMP
+extern u16 x86_cpu_to_apicid_init[];
+extern u16 x86_bios_cpu_apicid_init[];
+extern void *x86_cpu_to_apicid_early_ptr;
+extern void *x86_bios_cpu_apicid_early_ptr;
#else
-# include "smp_64.h"
+#define x86_cpu_to_apicid_early_ptr NULL
+#define x86_bios_cpu_apicid_early_ptr NULL
+#endif
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU(cpumask_t, cpu_core_map);
+DECLARE_PER_CPU(u16, cpu_llc_id);
+DECLARE_PER_CPU(u16, x86_cpu_to_apicid);
+DECLARE_PER_CPU(u16, x86_bios_cpu_apicid);
+
+/* Static state in head.S used to set up a CPU */
+extern struct {
+ void *sp;
+ unsigned short ss;
+} stack_start;
+
+struct smp_ops {
+ void (*smp_prepare_boot_cpu)(void);
+ void (*smp_prepare_cpus)(unsigned max_cpus);
+ int (*cpu_up)(unsigned cpu);
+ void (*smp_cpus_done)(unsigned max_cpus);
+
+ void (*smp_send_stop)(void);
+ void (*smp_send_reschedule)(int cpu);
+ int (*smp_call_function_mask)(cpumask_t mask,
+ void (*func)(void *info), void *info,
+ int wait);
+};
+
+/* Globals due to paravirt */
+extern void set_cpu_sibling_map(int cpu);
+
+#ifdef CONFIG_SMP
+#ifndef CONFIG_PARAVIRT
+#define startup_ipi_hook(phys_apicid, start_eip, start_esp) do { } while (0)
+#endif
+extern struct smp_ops smp_ops;
+
+static inline void smp_send_stop(void)
+{
+ smp_ops.smp_send_stop();
+}
+
+static inline void smp_prepare_boot_cpu(void)
+{
+ smp_ops.smp_prepare_boot_cpu();
+}
+
+static inline void smp_prepare_cpus(unsigned int max_cpus)
+{
+ smp_ops.smp_prepare_cpus(max_cpus);
+}
+
+static inline void smp_cpus_done(unsigned int max_cpus)
+{
+ smp_ops.smp_cpus_done(max_cpus);
+}
+
+static inline int __cpu_up(unsigned int cpu)
+{
+ return smp_ops.cpu_up(cpu);
+}
+
+static inline void smp_send_reschedule(int cpu)
+{
+ smp_ops.smp_send_reschedule(cpu);
+}
+
+static inline int smp_call_function_mask(cpumask_t mask,
+ void (*func) (void *info), void *info,
+ int wait)
+{
+ return smp_ops.smp_call_function_mask(mask, func, info, wait);
+}
+
+void native_smp_prepare_boot_cpu(void);
+void native_smp_prepare_cpus(unsigned int max_cpus);
+void native_smp_cpus_done(unsigned int max_cpus);
+int native_cpu_up(unsigned int cpunum);
+
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+
+extern void prefill_possible_map(void);
+
+void smp_store_cpu_info(int id);
+#define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu)
+
+/* We don't mark CPUs online until __cpu_up(), so we need another measure */
+static inline int num_booting_cpus(void)
+{
+ return cpus_weight(cpu_callout_map);
+}
+#endif /* CONFIG_SMP */
+
+extern unsigned disabled_cpus __cpuinitdata;
+
+#ifdef CONFIG_X86_32_SMP
+/*
+ * This function is needed by all SMP systems. It must _always_ be valid
+ * from the initial startup. We map APIC_BASE very early in page_setup(),
+ * so this is correct in the x86 case.
+ */
+DECLARE_PER_CPU(int, cpu_number);
+#define raw_smp_processor_id() (x86_read_percpu(cpu_number))
+extern int safe_smp_processor_id(void);
+
+#elif defined(CONFIG_X86_64_SMP)
+#define raw_smp_processor_id() read_pda(cpunumber)
+
+#define stack_smp_processor_id() \
+({ \
+ struct thread_info *ti; \
+ __asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (CURRENT_MASK)); \
+ ti->cpu; \
+})
+#define safe_smp_processor_id() smp_processor_id()
+
+#else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */
+#define cpu_physical_id(cpu) boot_cpu_physical_apicid
+#define safe_smp_processor_id() 0
+#define stack_smp_processor_id() 0
+#endif
+
+#ifdef CONFIG_X86_LOCAL_APIC
+
+static inline int logical_smp_processor_id(void)
+{
+ /* we don't want to mark this access volatile - bad code generation */
+ return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
+}
+
+#ifndef CONFIG_X86_64
+static inline unsigned int read_apic_id(void)
+{
+ return *(u32 *)(APIC_BASE + APIC_ID);
+}
+#else
+extern unsigned int read_apic_id(void);
+#endif
+
+
+# ifdef APIC_DEFINITION
+extern int hard_smp_processor_id(void);
+# else
+# include <mach_apicdef.h>
+static inline int hard_smp_processor_id(void)
+{
+ /* we don't want to mark this access volatile - bad code generation */
+ return GET_APIC_ID(read_apic_id());
+}
+# endif /* APIC_DEFINITION */
+
+#else /* CONFIG_X86_LOCAL_APIC */
+
+# ifndef CONFIG_SMP
+# define hard_smp_processor_id() 0
+# endif
+
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void cpu_exit_clear(void);
+extern void cpu_uninit(void);
+extern void remove_siblinginfo(int cpu);
+#endif
+
+extern void smp_alloc_memory(void);
+extern void lock_ipi_call_lock(void);
+extern void unlock_ipi_call_lock(void);
+#endif /* __ASSEMBLY__ */
#endif
diff --git a/include/asm-x86/smp_32.h b/include/asm-x86/smp_32.h
deleted file mode 100644
index 56152e3..0000000
--- a/include/asm-x86/smp_32.h
+++ /dev/null
@@ -1,165 +0,0 @@
-#ifndef __ASM_SMP_H
-#define __ASM_SMP_H
-
-#ifndef __ASSEMBLY__
-#include <linux/cpumask.h>
-#include <linux/init.h>
-
-/*
- * We need the APIC definitions automatically as part of 'smp.h'
- */
-#ifdef CONFIG_X86_LOCAL_APIC
-# include <asm/mpspec.h>
-# include <asm/apic.h>
-# ifdef CONFIG_X86_IO_APIC
-# include <asm/io_apic.h>
-# endif
-#endif
-
-extern cpumask_t cpu_callout_map;
-extern cpumask_t cpu_callin_map;
-
-extern int smp_num_siblings;
-extern unsigned int num_processors;
-
-extern void smp_alloc_memory(void);
-extern void lock_ipi_call_lock(void);
-extern void unlock_ipi_call_lock(void);
-
-extern void (*mtrr_hook) (void);
-extern void zap_low_mappings (void);
-
-extern u8 __initdata x86_cpu_to_apicid_init[];
-extern void *x86_cpu_to_apicid_early_ptr;
-
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
-DECLARE_PER_CPU(cpumask_t, cpu_core_map);
-DECLARE_PER_CPU(u8, cpu_llc_id);
-DECLARE_PER_CPU(u8, x86_cpu_to_apicid);
-
-#ifdef CONFIG_HOTPLUG_CPU
-extern void cpu_exit_clear(void);
-extern void cpu_uninit(void);
-extern void remove_siblinginfo(int cpu);
-#endif
-
-/* Globals due to paravirt */
-extern void set_cpu_sibling_map(int cpu);
-
-struct smp_ops
-{
- void (*smp_prepare_boot_cpu)(void);
- void (*smp_prepare_cpus)(unsigned max_cpus);
- int (*cpu_up)(unsigned cpu);
- void (*smp_cpus_done)(unsigned max_cpus);
-
- void (*smp_send_stop)(void);
- void (*smp_send_reschedule)(int cpu);
- int (*smp_call_function_mask)(cpumask_t mask,
- void (*func)(void *info), void *info,
- int wait);
-};
-
-#ifdef CONFIG_SMP
-extern struct smp_ops smp_ops;
-
-static inline void smp_prepare_boot_cpu(void)
-{
- smp_ops.smp_prepare_boot_cpu();
-}
-static inline void smp_prepare_cpus(unsigned int max_cpus)
-{
- smp_ops.smp_prepare_cpus(max_cpus);
-}
-static inline int __cpu_up(unsigned int cpu)
-{
- return smp_ops.cpu_up(cpu);
-}
-static inline void smp_cpus_done(unsigned int max_cpus)
-{
- smp_ops.smp_cpus_done(max_cpus);
-}
-
-static inline void smp_send_stop(void)
-{
- smp_ops.smp_send_stop();
-}
-static inline void smp_send_reschedule(int cpu)
-{
- smp_ops.smp_send_reschedule(cpu);
-}
-static inline int smp_call_function_mask(cpumask_t mask,
- void (*func) (void *info), void *info,
- int wait)
-{
- return smp_ops.smp_call_function_mask(mask, func, info, wait);
-}
-
-void native_smp_prepare_boot_cpu(void);
-void native_smp_prepare_cpus(unsigned int max_cpus);
-int native_cpu_up(unsigned int cpunum);
-void native_smp_cpus_done(unsigned int max_cpus);
-
-#ifndef CONFIG_PARAVIRT
-#define startup_ipi_hook(phys_apicid, start_eip, start_esp) do { } while (0)
-#endif
-
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-
-/*
- * This function is needed by all SMP systems. It must _always_ be valid
- * from the initial startup. We map APIC_BASE very early in page_setup(),
- * so this is correct in the x86 case.
- */
-DECLARE_PER_CPU(int, cpu_number);
-#define raw_smp_processor_id() (x86_read_percpu(cpu_number))
-
-#define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu)
-
-extern int safe_smp_processor_id(void);
-
-void __cpuinit smp_store_cpu_info(int id);
-
-/* We don't mark CPUs online until __cpu_up(), so we need another measure */
-static inline int num_booting_cpus(void)
-{
- return cpus_weight(cpu_callout_map);
-}
-
-#else /* CONFIG_SMP */
-
-#define safe_smp_processor_id() 0
-#define cpu_physical_id(cpu) boot_cpu_physical_apicid
-
-#endif /* !CONFIG_SMP */
-
-#ifdef CONFIG_X86_LOCAL_APIC
-
-static __inline int logical_smp_processor_id(void)
-{
- /* we don't want to mark this access volatile - bad code generation */
- return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
-}
-
-# ifdef APIC_DEFINITION
-extern int hard_smp_processor_id(void);
-# else
-# include <mach_apicdef.h>
-static inline int hard_smp_processor_id(void)
-{
- /* we don't want to mark this access volatile - bad code generation */
- return GET_APIC_ID(*(u32 *)(APIC_BASE + APIC_ID));
-}
-# endif /* APIC_DEFINITION */
-
-#else /* CONFIG_X86_LOCAL_APIC */
-
-# ifndef CONFIG_SMP
-# define hard_smp_processor_id() 0
-# endif
-
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#endif /* !ASSEMBLY */
-#endif
diff --git a/include/asm-x86/smp_64.h b/include/asm-x86/smp_64.h
deleted file mode 100644
index e0a7551..0000000
--- a/include/asm-x86/smp_64.h
+++ /dev/null
@@ -1,101 +0,0 @@
-#ifndef __ASM_SMP_H
-#define __ASM_SMP_H
-
-#include <linux/cpumask.h>
-#include <linux/init.h>
-
-/*
- * We need the APIC definitions automatically as part of 'smp.h'
- */
-#include <asm/apic.h>
-#include <asm/io_apic.h>
-#include <asm/mpspec.h>
-#include <asm/pda.h>
-#include <asm/thread_info.h>
-
-extern cpumask_t cpu_callout_map;
-extern cpumask_t cpu_initialized;
-
-extern int smp_num_siblings;
-extern unsigned int num_processors;
-
-extern void smp_alloc_memory(void);
-extern void lock_ipi_call_lock(void);
-extern void unlock_ipi_call_lock(void);
-
-extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *),
- void *info, int wait);
-
-extern u16 __initdata x86_cpu_to_apicid_init[];
-extern u16 __initdata x86_bios_cpu_apicid_init[];
-extern void *x86_cpu_to_apicid_early_ptr;
-extern void *x86_bios_cpu_apicid_early_ptr;
-
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
-DECLARE_PER_CPU(cpumask_t, cpu_core_map);
-DECLARE_PER_CPU(u16, cpu_llc_id);
-DECLARE_PER_CPU(u16, x86_cpu_to_apicid);
-DECLARE_PER_CPU(u16, x86_bios_cpu_apicid);
-
-static inline int cpu_present_to_apicid(int mps_cpu)
-{
- if (cpu_present(mps_cpu))
- return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu);
- else
- return BAD_APICID;
-}
-
-#ifdef CONFIG_SMP
-
-#define SMP_TRAMPOLINE_BASE 0x6000
-
-extern int __cpu_disable(void);
-extern void __cpu_die(unsigned int cpu);
-extern void prefill_possible_map(void);
-extern unsigned __cpuinitdata disabled_cpus;
-
-#define raw_smp_processor_id() read_pda(cpunumber)
-#define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu)
-
-#define stack_smp_processor_id() \
- ({ \
- struct thread_info *ti; \
- __asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (CURRENT_MASK)); \
- ti->cpu; \
-})
-
-/*
- * On x86 all CPUs are mapped 1:1 to the APIC space. This simplifies
- * scheduling and IPI sending and compresses data structures.
- */
-static inline int num_booting_cpus(void)
-{
- return cpus_weight(cpu_callout_map);
-}
-
-extern void smp_send_reschedule(int cpu);
-
-#else /* CONFIG_SMP */
-
-extern unsigned int boot_cpu_id;
-#define cpu_physical_id(cpu) boot_cpu_id
-#define stack_smp_processor_id() 0
-
-#endif /* !CONFIG_SMP */
-
-#define safe_smp_processor_id() smp_processor_id()
-
-static __inline int logical_smp_processor_id(void)
-{
- /* we don't want to mark this access volatile - bad code generation */
- return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
-}
-
-static inline int hard_smp_processor_id(void)
-{
- /* we don't want to mark this access volatile - bad code generation */
- return GET_APIC_ID(*(u32 *)(APIC_BASE + APIC_ID));
-}
-
-#endif
-
diff --git a/include/asm-x86/sparsemem.h b/include/asm-x86/sparsemem.h
index fa58cd5..9bd48b0 100644
--- a/include/asm-x86/sparsemem.h
+++ b/include/asm-x86/sparsemem.h
@@ -16,7 +16,7 @@
#ifdef CONFIG_X86_32
# ifdef CONFIG_X86_PAE
-# define SECTION_SIZE_BITS 30
+# define SECTION_SIZE_BITS 29
# define MAX_PHYSADDR_BITS 36
# define MAX_PHYSMEM_BITS 36
# else
@@ -26,8 +26,8 @@
# endif
#else /* CONFIG_X86_32 */
# define SECTION_SIZE_BITS 27 /* matt - 128 is convenient right now */
-# define MAX_PHYSADDR_BITS 40
-# define MAX_PHYSMEM_BITS 40
+# define MAX_PHYSADDR_BITS 44
+# define MAX_PHYSMEM_BITS 44
#endif
#endif /* CONFIG_SPARSEMEM */
diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h
index 23804c1..bc6376f 100644
--- a/include/asm-x86/spinlock.h
+++ b/include/asm-x86/spinlock.h
@@ -78,11 +78,11 @@
return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1;
}
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
+static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
{
short inc = 0x0100;
- __asm__ __volatile__ (
+ asm volatile (
LOCK_PREFIX "xaddw %w0, %1\n"
"1:\t"
"cmpb %h0, %b0\n\t"
@@ -92,42 +92,40 @@
/* don't need lfence here, because loads are in-order */
"jmp 1b\n"
"2:"
- :"+Q" (inc), "+m" (lock->slock)
+ : "+Q" (inc), "+m" (lock->slock)
:
- :"memory", "cc");
+ : "memory", "cc");
}
#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
{
int tmp;
short new;
- asm volatile(
- "movw %2,%w0\n\t"
- "cmpb %h0,%b0\n\t"
- "jne 1f\n\t"
- "movw %w0,%w1\n\t"
- "incb %h1\n\t"
- "lock ; cmpxchgw %w1,%2\n\t"
- "1:"
- "sete %b1\n\t"
- "movzbl %b1,%0\n\t"
- :"=&a" (tmp), "=Q" (new), "+m" (lock->slock)
- :
- : "memory", "cc");
+ asm volatile("movw %2,%w0\n\t"
+ "cmpb %h0,%b0\n\t"
+ "jne 1f\n\t"
+ "movw %w0,%w1\n\t"
+ "incb %h1\n\t"
+ "lock ; cmpxchgw %w1,%2\n\t"
+ "1:"
+ "sete %b1\n\t"
+ "movzbl %b1,%0\n\t"
+ : "=&a" (tmp), "=Q" (new), "+m" (lock->slock)
+ :
+ : "memory", "cc");
return tmp;
}
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
{
- __asm__ __volatile__(
- UNLOCK_LOCK_PREFIX "incb %0"
- :"+m" (lock->slock)
- :
- :"memory", "cc");
+ asm volatile(UNLOCK_LOCK_PREFIX "incb %0"
+ : "+m" (lock->slock)
+ :
+ : "memory", "cc");
}
#else
static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
@@ -144,60 +142,57 @@
return (((tmp >> 16) & 0xffff) - (tmp & 0xffff)) > 1;
}
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
+static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
{
int inc = 0x00010000;
int tmp;
- __asm__ __volatile__ (
- "lock ; xaddl %0, %1\n"
- "movzwl %w0, %2\n\t"
- "shrl $16, %0\n\t"
- "1:\t"
- "cmpl %0, %2\n\t"
- "je 2f\n\t"
- "rep ; nop\n\t"
- "movzwl %1, %2\n\t"
- /* don't need lfence here, because loads are in-order */
- "jmp 1b\n"
- "2:"
- :"+Q" (inc), "+m" (lock->slock), "=r" (tmp)
- :
- :"memory", "cc");
+ asm volatile("lock ; xaddl %0, %1\n"
+ "movzwl %w0, %2\n\t"
+ "shrl $16, %0\n\t"
+ "1:\t"
+ "cmpl %0, %2\n\t"
+ "je 2f\n\t"
+ "rep ; nop\n\t"
+ "movzwl %1, %2\n\t"
+ /* don't need lfence here, because loads are in-order */
+ "jmp 1b\n"
+ "2:"
+ : "+Q" (inc), "+m" (lock->slock), "=r" (tmp)
+ :
+ : "memory", "cc");
}
#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
{
int tmp;
int new;
- asm volatile(
- "movl %2,%0\n\t"
- "movl %0,%1\n\t"
- "roll $16, %0\n\t"
- "cmpl %0,%1\n\t"
- "jne 1f\n\t"
- "addl $0x00010000, %1\n\t"
- "lock ; cmpxchgl %1,%2\n\t"
- "1:"
- "sete %b1\n\t"
- "movzbl %b1,%0\n\t"
- :"=&a" (tmp), "=r" (new), "+m" (lock->slock)
- :
- : "memory", "cc");
+ asm volatile("movl %2,%0\n\t"
+ "movl %0,%1\n\t"
+ "roll $16, %0\n\t"
+ "cmpl %0,%1\n\t"
+ "jne 1f\n\t"
+ "addl $0x00010000, %1\n\t"
+ "lock ; cmpxchgl %1,%2\n\t"
+ "1:"
+ "sete %b1\n\t"
+ "movzbl %b1,%0\n\t"
+ : "=&a" (tmp), "=r" (new), "+m" (lock->slock)
+ :
+ : "memory", "cc");
return tmp;
}
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
{
- __asm__ __volatile__(
- UNLOCK_LOCK_PREFIX "incw %0"
- :"+m" (lock->slock)
- :
- :"memory", "cc");
+ asm volatile(UNLOCK_LOCK_PREFIX "incw %0"
+ : "+m" (lock->slock)
+ :
+ : "memory", "cc");
}
#endif
diff --git a/include/asm-x86/srat.h b/include/asm-x86/srat.h
index 165ab4b..f4bba13 100644
--- a/include/asm-x86/srat.h
+++ b/include/asm-x86/srat.h
@@ -1,5 +1,5 @@
/*
- * Some of the code in this file has been gleaned from the 64 bit
+ * Some of the code in this file has been gleaned from the 64 bit
* discontigmem support code base.
*
* Copyright (C) 2002, IBM Corp.
diff --git a/include/asm-x86/string_32.h b/include/asm-x86/string_32.h
index c5d13a8..b49369a 100644
--- a/include/asm-x86/string_32.h
+++ b/include/asm-x86/string_32.h
@@ -3,7 +3,7 @@
#ifdef __KERNEL__
-/* Let gcc decide wether to inline or use the out of line functions */
+/* Let gcc decide whether to inline or use the out of line functions */
#define __HAVE_ARCH_STRCPY
extern char *strcpy(char *dest, const char *src);
diff --git a/include/asm-x86/string_64.h b/include/asm-x86/string_64.h
index e583da7..52b5ab3 100644
--- a/include/asm-x86/string_64.h
+++ b/include/asm-x86/string_64.h
@@ -3,26 +3,24 @@
#ifdef __KERNEL__
-/* Written 2002 by Andi Kleen */
+/* Written 2002 by Andi Kleen */
-/* Only used for special circumstances. Stolen from i386/string.h */
-static __always_inline void *
-__inline_memcpy(void * to, const void * from, size_t n)
+/* Only used for special circumstances. Stolen from i386/string.h */
+static __always_inline void *__inline_memcpy(void *to, const void *from, size_t n)
{
-unsigned long d0, d1, d2;
-__asm__ __volatile__(
- "rep ; movsl\n\t"
- "testb $2,%b4\n\t"
- "je 1f\n\t"
- "movsw\n"
- "1:\ttestb $1,%b4\n\t"
- "je 2f\n\t"
- "movsb\n"
- "2:"
- : "=&c" (d0), "=&D" (d1), "=&S" (d2)
- :"0" (n/4), "q" (n),"1" ((long) to),"2" ((long) from)
- : "memory");
-return (to);
+ unsigned long d0, d1, d2;
+ asm volatile("rep ; movsl\n\t"
+ "testb $2,%b4\n\t"
+ "je 1f\n\t"
+ "movsw\n"
+ "1:\ttestb $1,%b4\n\t"
+ "je 2f\n\t"
+ "movsb\n"
+ "2:"
+ : "=&c" (d0), "=&D" (d1), "=&S" (d2)
+ : "0" (n / 4), "q" (n), "1" ((long)to), "2" ((long)from)
+ : "memory");
+ return to;
}
/* Even with __builtin_ the compiler may decide to use the out of line
@@ -32,28 +30,30 @@
#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
extern void *memcpy(void *to, const void *from, size_t len);
#else
-extern void *__memcpy(void *to, const void *from, size_t len);
-#define memcpy(dst,src,len) \
- ({ size_t __len = (len); \
- void *__ret; \
- if (__builtin_constant_p(len) && __len >= 64) \
- __ret = __memcpy((dst),(src),__len); \
- else \
- __ret = __builtin_memcpy((dst),(src),__len); \
- __ret; })
+extern void *__memcpy(void *to, const void *from, size_t len);
+#define memcpy(dst, src, len) \
+({ \
+ size_t __len = (len); \
+ void *__ret; \
+ if (__builtin_constant_p(len) && __len >= 64) \
+ __ret = __memcpy((dst), (src), __len); \
+ else \
+ __ret = __builtin_memcpy((dst), (src), __len); \
+ __ret; \
+})
#endif
#define __HAVE_ARCH_MEMSET
void *memset(void *s, int c, size_t n);
#define __HAVE_ARCH_MEMMOVE
-void * memmove(void * dest,const void *src,size_t count);
+void *memmove(void *dest, const void *src, size_t count);
-int memcmp(const void * cs,const void * ct,size_t count);
-size_t strlen(const char * s);
-char *strcpy(char * dest,const char *src);
-char *strcat(char * dest, const char * src);
-int strcmp(const char * cs,const char * ct);
+int memcmp(const void *cs, const void *ct, size_t count);
+size_t strlen(const char *s);
+char *strcpy(char *dest, const char *src);
+char *strcat(char *dest, const char *src);
+int strcmp(const char *cs, const char *ct);
#endif /* __KERNEL__ */
diff --git a/include/asm-x86/suspend_32.h b/include/asm-x86/suspend_32.h
index 1bbda3a..24e1c08 100644
--- a/include/asm-x86/suspend_32.h
+++ b/include/asm-x86/suspend_32.h
@@ -10,7 +10,7 @@
/* image of the saved processor state */
struct saved_context {
- u16 es, fs, gs, ss;
+ u16 es, fs, gs, ss;
unsigned long cr0, cr2, cr3, cr4;
struct desc_ptr gdt;
struct desc_ptr idt;
@@ -32,11 +32,11 @@
static inline void acpi_save_register_state(unsigned long return_point)
{
saved_eip = return_point;
- asm volatile ("movl %%esp,%0" : "=m" (saved_esp));
- asm volatile ("movl %%ebp,%0" : "=m" (saved_ebp));
- asm volatile ("movl %%ebx,%0" : "=m" (saved_ebx));
- asm volatile ("movl %%edi,%0" : "=m" (saved_edi));
- asm volatile ("movl %%esi,%0" : "=m" (saved_esi));
+ asm volatile("movl %%esp,%0" : "=m" (saved_esp));
+ asm volatile("movl %%ebp,%0" : "=m" (saved_ebp));
+ asm volatile("movl %%ebx,%0" : "=m" (saved_ebx));
+ asm volatile("movl %%edi,%0" : "=m" (saved_edi));
+ asm volatile("movl %%esi,%0" : "=m" (saved_esi));
}
#define acpi_restore_register_state() do {} while (0)
diff --git a/include/asm-x86/suspend_64.h b/include/asm-x86/suspend_64.h
index 2eb92cb..dc3262b 100644
--- a/include/asm-x86/suspend_64.h
+++ b/include/asm-x86/suspend_64.h
@@ -9,8 +9,7 @@
#include <asm/desc.h>
#include <asm/i387.h>
-static inline int
-arch_prepare_suspend(void)
+static inline int arch_prepare_suspend(void)
{
return 0;
}
@@ -25,7 +24,7 @@
*/
struct saved_context {
struct pt_regs regs;
- u16 ds, es, fs, gs, ss;
+ u16 ds, es, fs, gs, ss;
unsigned long gs_base, gs_kernel_base, fs_base;
unsigned long cr0, cr2, cr3, cr4, cr8;
unsigned long efer;
diff --git a/include/asm-x86/swiotlb.h b/include/asm-x86/swiotlb.h
index f9c5895..f5d9e74 100644
--- a/include/asm-x86/swiotlb.h
+++ b/include/asm-x86/swiotlb.h
@@ -8,15 +8,15 @@
extern dma_addr_t swiotlb_map_single(struct device *hwdev, void *ptr,
size_t size, int dir);
extern void *swiotlb_alloc_coherent(struct device *hwdev, size_t size,
- dma_addr_t *dma_handle, gfp_t flags);
+ dma_addr_t *dma_handle, gfp_t flags);
extern void swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr,
- size_t size, int dir);
+ size_t size, int dir);
extern void swiotlb_sync_single_for_cpu(struct device *hwdev,
- dma_addr_t dev_addr,
- size_t size, int dir);
+ dma_addr_t dev_addr,
+ size_t size, int dir);
extern void swiotlb_sync_single_for_device(struct device *hwdev,
- dma_addr_t dev_addr,
- size_t size, int dir);
+ dma_addr_t dev_addr,
+ size_t size, int dir);
extern void swiotlb_sync_single_range_for_cpu(struct device *hwdev,
dma_addr_t dev_addr,
unsigned long offset,
@@ -26,18 +26,18 @@
unsigned long offset,
size_t size, int dir);
extern void swiotlb_sync_sg_for_cpu(struct device *hwdev,
- struct scatterlist *sg, int nelems,
- int dir);
+ struct scatterlist *sg, int nelems,
+ int dir);
extern void swiotlb_sync_sg_for_device(struct device *hwdev,
- struct scatterlist *sg, int nelems,
- int dir);
+ struct scatterlist *sg, int nelems,
+ int dir);
extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg,
- int nents, int direction);
+ int nents, int direction);
extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg,
- int nents, int direction);
+ int nents, int direction);
extern int swiotlb_dma_mapping_error(dma_addr_t dma_addr);
-extern void swiotlb_free_coherent (struct device *hwdev, size_t size,
- void *vaddr, dma_addr_t dma_handle);
+extern void swiotlb_free_coherent(struct device *hwdev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
extern int swiotlb_dma_supported(struct device *hwdev, u64 mask);
extern void swiotlb_init(void);
diff --git a/include/asm-x86/sync_bitops.h b/include/asm-x86/sync_bitops.h
index 6b775c9..b47a1d0 100644
--- a/include/asm-x86/sync_bitops.h
+++ b/include/asm-x86/sync_bitops.h
@@ -13,7 +13,7 @@
* bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
*/
-#define ADDR (*(volatile long *) addr)
+#define ADDR (*(volatile long *)addr)
/**
* sync_set_bit - Atomically set a bit in memory
@@ -26,12 +26,12 @@
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
-static inline void sync_set_bit(int nr, volatile unsigned long * addr)
+static inline void sync_set_bit(int nr, volatile unsigned long *addr)
{
- __asm__ __volatile__("lock; btsl %1,%0"
- :"+m" (ADDR)
- :"Ir" (nr)
- : "memory");
+ asm volatile("lock; btsl %1,%0"
+ : "+m" (ADDR)
+ : "Ir" (nr)
+ : "memory");
}
/**
@@ -44,12 +44,12 @@
* you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
* in order to ensure changes are visible on other processors.
*/
-static inline void sync_clear_bit(int nr, volatile unsigned long * addr)
+static inline void sync_clear_bit(int nr, volatile unsigned long *addr)
{
- __asm__ __volatile__("lock; btrl %1,%0"
- :"+m" (ADDR)
- :"Ir" (nr)
- : "memory");
+ asm volatile("lock; btrl %1,%0"
+ : "+m" (ADDR)
+ : "Ir" (nr)
+ : "memory");
}
/**
@@ -61,12 +61,12 @@
* Note that @nr may be almost arbitrarily large; this function is not
* restricted to acting on a single-word quantity.
*/
-static inline void sync_change_bit(int nr, volatile unsigned long * addr)
+static inline void sync_change_bit(int nr, volatile unsigned long *addr)
{
- __asm__ __volatile__("lock; btcl %1,%0"
- :"+m" (ADDR)
- :"Ir" (nr)
- : "memory");
+ asm volatile("lock; btcl %1,%0"
+ : "+m" (ADDR)
+ : "Ir" (nr)
+ : "memory");
}
/**
@@ -77,13 +77,13 @@
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
-static inline int sync_test_and_set_bit(int nr, volatile unsigned long * addr)
+static inline int sync_test_and_set_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
- __asm__ __volatile__("lock; btsl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"+m" (ADDR)
- :"Ir" (nr) : "memory");
+ asm volatile("lock; btsl %2,%1\n\tsbbl %0,%0"
+ : "=r" (oldbit), "+m" (ADDR)
+ : "Ir" (nr) : "memory");
return oldbit;
}
@@ -95,13 +95,13 @@
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
-static inline int sync_test_and_clear_bit(int nr, volatile unsigned long * addr)
+static inline int sync_test_and_clear_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
- __asm__ __volatile__("lock; btrl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"+m" (ADDR)
- :"Ir" (nr) : "memory");
+ asm volatile("lock; btrl %2,%1\n\tsbbl %0,%0"
+ : "=r" (oldbit), "+m" (ADDR)
+ : "Ir" (nr) : "memory");
return oldbit;
}
@@ -113,36 +113,17 @@
* This operation is atomic and cannot be reordered.
* It also implies a memory barrier.
*/
-static inline int sync_test_and_change_bit(int nr, volatile unsigned long* addr)
+static inline int sync_test_and_change_bit(int nr, volatile unsigned long *addr)
{
int oldbit;
- __asm__ __volatile__("lock; btcl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"+m" (ADDR)
- :"Ir" (nr) : "memory");
+ asm volatile("lock; btcl %2,%1\n\tsbbl %0,%0"
+ : "=r" (oldbit), "+m" (ADDR)
+ : "Ir" (nr) : "memory");
return oldbit;
}
-static __always_inline int sync_constant_test_bit(int nr, const volatile unsigned long *addr)
-{
- return ((1UL << (nr & 31)) &
- (((const volatile unsigned int *)addr)[nr >> 5])) != 0;
-}
-
-static inline int sync_var_test_bit(int nr, const volatile unsigned long * addr)
-{
- int oldbit;
-
- __asm__ __volatile__("btl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit)
- :"m" (ADDR),"Ir" (nr));
- return oldbit;
-}
-
-#define sync_test_bit(nr,addr) \
- (__builtin_constant_p(nr) ? \
- sync_constant_test_bit((nr),(addr)) : \
- sync_var_test_bit((nr),(addr)))
+#define sync_test_bit(nr, addr) test_bit(nr, addr)
#undef ADDR
diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h
index 9cff02f..a2f04cd 100644
--- a/include/asm-x86/system.h
+++ b/include/asm-x86/system.h
@@ -27,22 +27,44 @@
* Saving eflags is important. It switches not only IOPL between tasks,
* it also protects other tasks from NT leaking through sysenter etc.
*/
-#define switch_to(prev, next, last) do { \
- unsigned long esi, edi; \
- asm volatile("pushfl\n\t" /* Save flags */ \
- "pushl %%ebp\n\t" \
- "movl %%esp,%0\n\t" /* save ESP */ \
- "movl %5,%%esp\n\t" /* restore ESP */ \
- "movl $1f,%1\n\t" /* save EIP */ \
- "pushl %6\n\t" /* restore EIP */ \
- "jmp __switch_to\n" \
+#define switch_to(prev, next, last) \
+do { \
+ /* \
+ * Context-switching clobbers all registers, so we clobber \
+ * them explicitly, via unused output variables. \
+ * (EAX and EBP is not listed because EBP is saved/restored \
+ * explicitly for wchan access and EAX is the return value of \
+ * __switch_to()) \
+ */ \
+ unsigned long ebx, ecx, edx, esi, edi; \
+ \
+ asm volatile("pushfl\n\t" /* save flags */ \
+ "pushl %%ebp\n\t" /* save EBP */ \
+ "movl %%esp,%[prev_sp]\n\t" /* save ESP */ \
+ "movl %[next_sp],%%esp\n\t" /* restore ESP */ \
+ "movl $1f,%[prev_ip]\n\t" /* save EIP */ \
+ "pushl %[next_ip]\n\t" /* restore EIP */ \
+ "jmp __switch_to\n" /* regparm call */ \
"1:\t" \
- "popl %%ebp\n\t" \
- "popfl" \
- :"=m" (prev->thread.sp), "=m" (prev->thread.ip), \
- "=a" (last), "=S" (esi), "=D" (edi) \
- :"m" (next->thread.sp), "m" (next->thread.ip), \
- "2" (prev), "d" (next)); \
+ "popl %%ebp\n\t" /* restore EBP */ \
+ "popfl\n" /* restore flags */ \
+ \
+ /* output parameters */ \
+ : [prev_sp] "=m" (prev->thread.sp), \
+ [prev_ip] "=m" (prev->thread.ip), \
+ "=a" (last), \
+ \
+ /* clobbered output registers: */ \
+ "=b" (ebx), "=c" (ecx), "=d" (edx), \
+ "=S" (esi), "=D" (edi) \
+ \
+ /* input parameters: */ \
+ : [next_sp] "m" (next->thread.sp), \
+ [next_ip] "m" (next->thread.ip), \
+ \
+ /* regparm parameters for __switch_to(): */ \
+ [prev] "a" (prev), \
+ [next] "d" (next)); \
} while (0)
/*
@@ -122,35 +144,34 @@
*/
#define loadsegment(seg, value) \
asm volatile("\n" \
- "1:\t" \
- "movl %k0,%%" #seg "\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3:\t" \
- "movl %k1, %%" #seg "\n\t" \
- "jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b,3b) \
- : :"r" (value), "r" (0))
+ "1:\t" \
+ "movl %k0,%%" #seg "\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3:\t" \
+ "movl %k1, %%" #seg "\n\t" \
+ "jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b,3b) \
+ : :"r" (value), "r" (0))
/*
* Save a segment register away
*/
-#define savesegment(seg, value) \
+#define savesegment(seg, value) \
asm volatile("mov %%" #seg ",%0":"=rm" (value))
static inline unsigned long get_limit(unsigned long segment)
{
unsigned long __limit;
- __asm__("lsll %1,%0"
- :"=r" (__limit):"r" (segment));
- return __limit+1;
+ asm("lsll %1,%0" : "=r" (__limit) : "r" (segment));
+ return __limit + 1;
}
static inline void native_clts(void)
{
- asm volatile ("clts");
+ asm volatile("clts");
}
/*
@@ -165,43 +186,43 @@
static inline unsigned long native_read_cr0(void)
{
unsigned long val;
- asm volatile("mov %%cr0,%0\n\t" :"=r" (val), "=m" (__force_order));
+ asm volatile("mov %%cr0,%0\n\t" : "=r" (val), "=m" (__force_order));
return val;
}
static inline void native_write_cr0(unsigned long val)
{
- asm volatile("mov %0,%%cr0": :"r" (val), "m" (__force_order));
+ asm volatile("mov %0,%%cr0": : "r" (val), "m" (__force_order));
}
static inline unsigned long native_read_cr2(void)
{
unsigned long val;
- asm volatile("mov %%cr2,%0\n\t" :"=r" (val), "=m" (__force_order));
+ asm volatile("mov %%cr2,%0\n\t" : "=r" (val), "=m" (__force_order));
return val;
}
static inline void native_write_cr2(unsigned long val)
{
- asm volatile("mov %0,%%cr2": :"r" (val), "m" (__force_order));
+ asm volatile("mov %0,%%cr2": : "r" (val), "m" (__force_order));
}
static inline unsigned long native_read_cr3(void)
{
unsigned long val;
- asm volatile("mov %%cr3,%0\n\t" :"=r" (val), "=m" (__force_order));
+ asm volatile("mov %%cr3,%0\n\t" : "=r" (val), "=m" (__force_order));
return val;
}
static inline void native_write_cr3(unsigned long val)
{
- asm volatile("mov %0,%%cr3": :"r" (val), "m" (__force_order));
+ asm volatile("mov %0,%%cr3": : "r" (val), "m" (__force_order));
}
static inline unsigned long native_read_cr4(void)
{
unsigned long val;
- asm volatile("mov %%cr4,%0\n\t" :"=r" (val), "=m" (__force_order));
+ asm volatile("mov %%cr4,%0\n\t" : "=r" (val), "=m" (__force_order));
return val;
}
@@ -213,7 +234,7 @@
#ifdef CONFIG_X86_32
asm volatile("1: mov %%cr4, %0\n"
"2:\n"
- _ASM_EXTABLE(1b,2b)
+ _ASM_EXTABLE(1b, 2b)
: "=r" (val), "=m" (__force_order) : "0" (0));
#else
val = native_read_cr4();
@@ -223,7 +244,7 @@
static inline void native_write_cr4(unsigned long val)
{
- asm volatile("mov %0,%%cr4": :"r" (val), "m" (__force_order));
+ asm volatile("mov %0,%%cr4": : "r" (val), "m" (__force_order));
}
#ifdef CONFIG_X86_64
@@ -244,6 +265,7 @@
{
asm volatile("wbinvd": : :"memory");
}
+
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
@@ -276,7 +298,7 @@
asm volatile("clflush %0" : "+m" (*(volatile char __force *)__p));
}
-#define nop() __asm__ __volatile__ ("nop")
+#define nop() asm volatile ("nop")
void disable_hlt(void);
void enable_hlt(void);
@@ -296,16 +318,7 @@
*/
#ifdef CONFIG_X86_32
/*
- * For now, "wmb()" doesn't actually do anything, as all
- * Intel CPU's follow what Intel calls a *Processor Order*,
- * in which all writes are seen in the program order even
- * outside the CPU.
- *
- * I expect future Intel CPU's to have a weaker ordering,
- * but I'd also expect them to finally get their act together
- * and add some real memory barriers if so.
- *
- * Some non intel clones support out of order store. wmb() ceases to be a
+ * Some non-Intel clones support out of order store. wmb() ceases to be a
* nop for these.
*/
#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
@@ -384,7 +397,7 @@
# define smp_wmb() barrier()
#endif
#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
#else
#define smp_mb() barrier()
#define smp_rmb() barrier()
diff --git a/include/asm-x86/tce.h b/include/asm-x86/tce.h
index cd955d3..b1a4ea0 100644
--- a/include/asm-x86/tce.h
+++ b/include/asm-x86/tce.h
@@ -39,7 +39,7 @@
#define TCE_RPN_MASK 0x0000fffffffff000ULL
extern void tce_build(struct iommu_table *tbl, unsigned long index,
- unsigned int npages, unsigned long uaddr, int direction);
+ unsigned int npages, unsigned long uaddr, int direction);
extern void tce_free(struct iommu_table *tbl, long index, unsigned int npages);
extern void * __init alloc_tce_table(void);
extern void __init free_tce_table(void *tbl);
diff --git a/include/asm-x86/thread_info_32.h b/include/asm-x86/thread_info_32.h
index 5bd5082..4e053fa 100644
--- a/include/asm-x86/thread_info_32.h
+++ b/include/asm-x86/thread_info_32.h
@@ -20,7 +20,8 @@
* low level task data that entry.S needs immediate access to
* - this struct should fit entirely inside of one cache line
* - this struct shares the supervisor stack pages
- * - if the contents of this structure are changed, the assembly constants must also be changed
+ * - if the contents of this structure are changed,
+ * the assembly constants must also be changed
*/
#ifndef __ASSEMBLY__
@@ -30,18 +31,16 @@
unsigned long flags; /* low level flags */
unsigned long status; /* thread-synchronous flags */
__u32 cpu; /* current CPU */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
-
-
+ int preempt_count; /* 0 => preemptable,
+ <0 => BUG */
mm_segment_t addr_limit; /* thread address space:
- 0-0xBFFFFFFF for user-thead
- 0-0xFFFFFFFF for kernel-thread
+ 0-0xBFFFFFFF user-thread
+ 0-0xFFFFFFFF kernel-thread
*/
void *sysenter_return;
struct restart_block restart_block;
-
- unsigned long previous_esp; /* ESP of the previous stack in case
- of nested (IRQ) stacks
+ unsigned long previous_esp; /* ESP of the previous stack in
+ case of nested (IRQ) stacks
*/
__u8 supervisor_stack[0];
};
@@ -90,15 +89,16 @@
/* how to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
{
- return (struct thread_info *)(current_stack_pointer & ~(THREAD_SIZE - 1));
+ return (struct thread_info *)
+ (current_stack_pointer & ~(THREAD_SIZE - 1));
}
/* thread information allocation */
#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) ((struct thread_info *) \
- __get_free_pages(GFP_KERNEL| __GFP_ZERO, get_order(THREAD_SIZE)))
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+ __get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(THREAD_SIZE)))
#else
-#define alloc_thread_info(tsk) ((struct thread_info *) \
+#define alloc_thread_info(tsk) ((struct thread_info *) \
__get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE)))
#endif
@@ -107,7 +107,7 @@
#else /* !__ASSEMBLY__ */
/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg) \
+#define GET_THREAD_INFO(reg) \
movl $-THREAD_SIZE, reg; \
andl %esp, reg
@@ -119,14 +119,16 @@
/*
* thread information flags
- * - these are process state flags that various assembly files may need to access
+ * - these are process state flags that various
+ * assembly files may need to access
* - pending work-to-be-done flags are in LSW
* - other flags in MSW
*/
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
#define TIF_SIGPENDING 1 /* signal pending */
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */
+#define TIF_SINGLESTEP 3 /* restore singlestep on return to
+ user mode */
#define TIF_IRET 4 /* return with iret */
#define TIF_SYSCALL_EMU 5 /* syscall emulation active */
#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */
@@ -143,36 +145,36 @@
#define TIF_DS_AREA_MSR 23 /* uses thread_struct.ds_area_msr */
#define TIF_BTS_TRACE_TS 24 /* record scheduling event timestamps */
-#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
-#define _TIF_IRET (1<<TIF_IRET)
-#define _TIF_SYSCALL_EMU (1<<TIF_SYSCALL_EMU)
-#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
-#define _TIF_SECCOMP (1<<TIF_SECCOMP)
-#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
-#define _TIF_HRTICK_RESCHED (1<<TIF_HRTICK_RESCHED)
-#define _TIF_DEBUG (1<<TIF_DEBUG)
-#define _TIF_IO_BITMAP (1<<TIF_IO_BITMAP)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
-#define _TIF_NOTSC (1<<TIF_NOTSC)
-#define _TIF_FORCED_TF (1<<TIF_FORCED_TF)
-#define _TIF_DEBUGCTLMSR (1<<TIF_DEBUGCTLMSR)
-#define _TIF_DS_AREA_MSR (1<<TIF_DS_AREA_MSR)
-#define _TIF_BTS_TRACE_TS (1<<TIF_BTS_TRACE_TS)
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_IRET (1 << TIF_IRET)
+#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU)
+#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP (1 << TIF_SECCOMP)
+#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
+#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED)
+#define _TIF_DEBUG (1 << TIF_DEBUG)
+#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP)
+#define _TIF_FREEZE (1 << TIF_FREEZE)
+#define _TIF_NOTSC (1 << TIF_NOTSC)
+#define _TIF_FORCED_TF (1 << TIF_FORCED_TF)
+#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR)
+#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR)
+#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS)
/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK \
- (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
- _TIF_SECCOMP | _TIF_SYSCALL_EMU))
+#define _TIF_WORK_MASK \
+ (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+ _TIF_SECCOMP | _TIF_SYSCALL_EMU))
/* work to do on any return to u-space */
#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
/* flags to check in __switch_to() */
-#define _TIF_WORK_CTXSW \
- (_TIF_IO_BITMAP | _TIF_NOTSC | _TIF_DEBUGCTLMSR | \
- _TIF_DS_AREA_MSR | _TIF_BTS_TRACE_TS)
+#define _TIF_WORK_CTXSW \
+ (_TIF_IO_BITMAP | _TIF_NOTSC | _TIF_DEBUGCTLMSR | \
+ _TIF_DS_AREA_MSR | _TIF_BTS_TRACE_TS)
#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW
#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG)
@@ -184,8 +186,10 @@
* ever touches our thread-synchronous status, so we don't
* have to worry about atomic accesses.
*/
-#define TS_USEDFPU 0x0001 /* FPU was used by this task this quantum (SMP) */
-#define TS_POLLING 0x0002 /* True if in idle loop and not sleeping */
+#define TS_USEDFPU 0x0001 /* FPU was used by this task
+ this quantum (SMP) */
+#define TS_POLLING 0x0002 /* True if in idle loop
+ and not sleeping */
#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
diff --git a/include/asm-x86/thread_info_64.h b/include/asm-x86/thread_info_64.h
index 6c9b214..1e5c6f6 100644
--- a/include/asm-x86/thread_info_64.h
+++ b/include/asm-x86/thread_info_64.h
@@ -29,9 +29,9 @@
__u32 flags; /* low level flags */
__u32 status; /* thread synchronous flags */
__u32 cpu; /* current CPU */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
-
- mm_segment_t addr_limit;
+ int preempt_count; /* 0 => preemptable,
+ <0 => BUG */
+ mm_segment_t addr_limit;
struct restart_block restart_block;
#ifdef CONFIG_IA32_EMULATION
void __user *sysenter_return;
@@ -61,17 +61,17 @@
#define init_stack (init_thread_union.stack)
static inline struct thread_info *current_thread_info(void)
-{
+{
struct thread_info *ti;
ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE);
- return ti;
+ return ti;
}
/* do not use in interrupt context */
static inline struct thread_info *stack_thread_info(void)
{
struct thread_info *ti;
- __asm__("andq %%rsp,%0; ":"=r" (ti) : "0" (~(THREAD_SIZE - 1)));
+ asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1)));
return ti;
}
@@ -82,8 +82,8 @@
#define THREAD_FLAGS GFP_KERNEL
#endif
-#define alloc_thread_info(tsk) \
- ((struct thread_info *) __get_free_pages(THREAD_FLAGS, THREAD_ORDER))
+#define alloc_thread_info(tsk) \
+ ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER))
#define free_thread_info(ti) free_pages((unsigned long) (ti), THREAD_ORDER)
@@ -98,7 +98,8 @@
/*
* thread information flags
- * - these are process state flags that various assembly files may need to access
+ * - these are process state flags that various assembly files
+ * may need to access
* - pending work-to-be-done flags are in LSW
* - other flags in MSW
* Warning: layout of LSW is hardcoded in entry.S
@@ -114,7 +115,7 @@
#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */
#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */
/* 16 free */
-#define TIF_IA32 17 /* 32bit process */
+#define TIF_IA32 17 /* 32bit process */
#define TIF_FORK 18 /* ret_from_fork */
#define TIF_ABI_PENDING 19
#define TIF_MEMDIE 20
@@ -126,39 +127,40 @@
#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */
#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */
-#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
-#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_IRET (1<<TIF_IRET)
-#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
-#define _TIF_SECCOMP (1<<TIF_SECCOMP)
-#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
-#define _TIF_MCE_NOTIFY (1<<TIF_MCE_NOTIFY)
-#define _TIF_HRTICK_RESCHED (1<<TIF_HRTICK_RESCHED)
-#define _TIF_IA32 (1<<TIF_IA32)
-#define _TIF_FORK (1<<TIF_FORK)
-#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
-#define _TIF_DEBUG (1<<TIF_DEBUG)
-#define _TIF_IO_BITMAP (1<<TIF_IO_BITMAP)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
-#define _TIF_FORCED_TF (1<<TIF_FORCED_TF)
-#define _TIF_DEBUGCTLMSR (1<<TIF_DEBUGCTLMSR)
-#define _TIF_DS_AREA_MSR (1<<TIF_DS_AREA_MSR)
-#define _TIF_BTS_TRACE_TS (1<<TIF_BTS_TRACE_TS)
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_IRET (1 << TIF_IRET)
+#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP (1 << TIF_SECCOMP)
+#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
+#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY)
+#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED)
+#define _TIF_IA32 (1 << TIF_IA32)
+#define _TIF_FORK (1 << TIF_FORK)
+#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING)
+#define _TIF_DEBUG (1 << TIF_DEBUG)
+#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP)
+#define _TIF_FREEZE (1 << TIF_FREEZE)
+#define _TIF_FORCED_TF (1 << TIF_FORCED_TF)
+#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR)
+#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR)
+#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS)
/* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK \
- (0x0000FFFF & ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP))
+#define _TIF_WORK_MASK \
+ (0x0000FFFF & \
+ ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP))
/* work to do on any return to user space */
#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP)
-#define _TIF_DO_NOTIFY_MASK \
+#define _TIF_DO_NOTIFY_MASK \
(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED)
/* flags to check in __switch_to() */
-#define _TIF_WORK_CTXSW \
- (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS)
+#define _TIF_WORK_CTXSW \
+ (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS)
#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW
#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG)
@@ -171,9 +173,11 @@
* ever touches our thread-synchronous status, so we don't
* have to worry about atomic accesses.
*/
-#define TS_USEDFPU 0x0001 /* FPU was used by this task this quantum (SMP) */
+#define TS_USEDFPU 0x0001 /* FPU was used by this task
+ this quantum (SMP) */
#define TS_COMPAT 0x0002 /* 32bit syscall active */
-#define TS_POLLING 0x0004 /* true if in idle loop and not sleeping */
+#define TS_POLLING 0x0004 /* true if in idle loop
+ and not sleeping */
#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
diff --git a/include/asm-x86/tlbflush.h b/include/asm-x86/tlbflush.h
index 3998709..0c0674d 100644
--- a/include/asm-x86/tlbflush.h
+++ b/include/asm-x86/tlbflush.h
@@ -32,7 +32,7 @@
static inline void __native_flush_tlb_single(unsigned long addr)
{
- __asm__ __volatile__("invlpg (%0)" ::"r" (addr) : "memory");
+ asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
}
static inline void __flush_tlb_all(void)
@@ -134,8 +134,7 @@
#define TLBSTATE_LAZY 2
#ifdef CONFIG_X86_32
-struct tlb_state
-{
+struct tlb_state {
struct mm_struct *active_mm;
int state;
char __cacheline_padding[L1_CACHE_BYTES-8];
diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h
index 8af05a9..81a29eb 100644
--- a/include/asm-x86/topology.h
+++ b/include/asm-x86/topology.h
@@ -32,15 +32,20 @@
/* Mappings between logical cpu number and node number */
#ifdef CONFIG_X86_32
extern int cpu_to_node_map[];
-
#else
-DECLARE_PER_CPU(int, x86_cpu_to_node_map);
-extern int x86_cpu_to_node_map_init[];
-extern void *x86_cpu_to_node_map_early_ptr;
/* Returns the number of the current Node. */
#define numa_node_id() (early_cpu_to_node(raw_smp_processor_id()))
#endif
+DECLARE_PER_CPU(int, x86_cpu_to_node_map);
+
+#ifdef CONFIG_SMP
+extern int x86_cpu_to_node_map_init[];
+extern void *x86_cpu_to_node_map_early_ptr;
+#else
+#define x86_cpu_to_node_map_early_ptr NULL
+#endif
+
extern cpumask_t node_to_cpumask_map[];
#define NUMA_NO_NODE (-1)
@@ -54,6 +59,8 @@
}
#else /* CONFIG_X86_64 */
+
+#ifdef CONFIG_SMP
static inline int early_cpu_to_node(int cpu)
{
int *cpu_to_node_map = x86_cpu_to_node_map_early_ptr;
@@ -65,21 +72,21 @@
else
return NUMA_NO_NODE;
}
+#else
+#define early_cpu_to_node(cpu) cpu_to_node(cpu)
+#endif
static inline int cpu_to_node(int cpu)
{
#ifdef CONFIG_DEBUG_PER_CPU_MAPS
if (x86_cpu_to_node_map_early_ptr) {
printk("KERN_NOTICE cpu_to_node(%d): usage too early!\n",
- (int)cpu);
+ (int)cpu);
dump_stack();
return ((int *)x86_cpu_to_node_map_early_ptr)[cpu];
}
#endif
- if (per_cpu_offset(cpu))
- return per_cpu(x86_cpu_to_node_map, cpu);
- else
- return NUMA_NO_NODE;
+ return per_cpu(x86_cpu_to_node_map, cpu);
}
#endif /* CONFIG_X86_64 */
diff --git a/include/asm-x86/trampoline.h b/include/asm-x86/trampoline.h
new file mode 100644
index 0000000..b156b08
--- /dev/null
+++ b/include/asm-x86/trampoline.h
@@ -0,0 +1,21 @@
+#ifndef __TRAMPOLINE_HEADER
+#define __TRAMPOLINE_HEADER
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Trampoline 80x86 program as an array.
+ */
+extern const unsigned char trampoline_data [];
+extern const unsigned char trampoline_end [];
+extern unsigned char *trampoline_base;
+
+extern unsigned long init_rsp;
+extern unsigned long initial_code;
+
+#define TRAMPOLINE_BASE 0x6000
+extern unsigned long setup_trampoline(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __TRAMPOLINE_HEADER */
diff --git a/include/asm-x86/tsc.h b/include/asm-x86/tsc.h
index 7d3e27f..d2d8eb5 100644
--- a/include/asm-x86/tsc.h
+++ b/include/asm-x86/tsc.h
@@ -42,7 +42,7 @@
if (!cpu_has_tsc)
return 0;
#endif
- return (cycles_t) __native_read_tsc();
+ return (cycles_t)__native_read_tsc();
}
extern void tsc_init(void);
diff --git a/include/asm-x86/uaccess_32.h b/include/asm-x86/uaccess_32.h
index fcc570e..8e7595c 100644
--- a/include/asm-x86/uaccess_32.h
+++ b/include/asm-x86/uaccess_32.h
@@ -32,7 +32,7 @@
#define get_fs() (current_thread_info()->addr_limit)
#define set_fs(x) (current_thread_info()->addr_limit = (x))
-#define segment_eq(a,b) ((a).seg == (b).seg)
+#define segment_eq(a, b) ((a).seg == (b).seg)
/*
* movsl can be slow when source and dest are not both 8-byte aligned
@@ -43,7 +43,9 @@
} ____cacheline_aligned_in_smp movsl_mask;
#endif
-#define __addr_ok(addr) ((unsigned long __force)(addr) < (current_thread_info()->addr_limit.seg))
+#define __addr_ok(addr) \
+ ((unsigned long __force)(addr) < \
+ (current_thread_info()->addr_limit.seg))
/*
* Test whether a block of memory is a valid user space address.
@@ -54,13 +56,16 @@
*
* This needs 33-bit arithmetic. We have a carry...
*/
-#define __range_ok(addr,size) ({ \
- unsigned long flag,roksum; \
- __chk_user_ptr(addr); \
- asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \
- :"=&r" (flag), "=r" (roksum) \
- :"1" (addr),"g" ((int)(size)),"rm" (current_thread_info()->addr_limit.seg)); \
- flag; })
+#define __range_ok(addr, size) \
+({ \
+ unsigned long flag, roksum; \
+ __chk_user_ptr(addr); \
+ asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \
+ :"=&r" (flag), "=r" (roksum) \
+ :"1" (addr), "g" ((int)(size)), \
+ "rm" (current_thread_info()->addr_limit.seg)); \
+ flag; \
+})
/**
* access_ok: - Checks if a user space pointer is valid
@@ -81,7 +86,7 @@
* checks that the pointer is in the user space range - after calling
* this function, memory access functions may still return -EFAULT.
*/
-#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0))
+#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
/*
* The exception table consists of pairs of addresses: the first is the
@@ -96,8 +101,7 @@
* on our cache or tlb entries.
*/
-struct exception_table_entry
-{
+struct exception_table_entry {
unsigned long insn, fixup;
};
@@ -122,13 +126,15 @@
extern void __get_user_2(void);
extern void __get_user_4(void);
-#define __get_user_x(size,ret,x,ptr) \
- __asm__ __volatile__("call __get_user_" #size \
- :"=a" (ret),"=d" (x) \
- :"0" (ptr))
+#define __get_user_x(size, ret, x, ptr) \
+ asm volatile("call __get_user_" #size \
+ :"=a" (ret),"=d" (x) \
+ :"0" (ptr))
-/* Careful: we have to cast the result to the type of the pointer for sign reasons */
+/* Careful: we have to cast the result to the type of the pointer
+ * for sign reasons */
+
/**
* get_user: - Get a simple variable from user space.
* @x: Variable to store result.
@@ -146,15 +152,24 @@
* Returns zero on success, or -EFAULT on error.
* On error, the variable @x is set to zero.
*/
-#define get_user(x,ptr) \
-({ int __ret_gu; \
+#define get_user(x, ptr) \
+({ \
+ int __ret_gu; \
unsigned long __val_gu; \
__chk_user_ptr(ptr); \
- switch(sizeof (*(ptr))) { \
- case 1: __get_user_x(1,__ret_gu,__val_gu,ptr); break; \
- case 2: __get_user_x(2,__ret_gu,__val_gu,ptr); break; \
- case 4: __get_user_x(4,__ret_gu,__val_gu,ptr); break; \
- default: __get_user_x(X,__ret_gu,__val_gu,ptr); break; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_user_x(1, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 2: \
+ __get_user_x(2, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 4: \
+ __get_user_x(4, __ret_gu, __val_gu, ptr); \
+ break; \
+ default: \
+ __get_user_x(X, __ret_gu, __val_gu, ptr); \
+ break; \
} \
(x) = (__typeof__(*(ptr)))__val_gu; \
__ret_gu; \
@@ -171,11 +186,25 @@
extern void __put_user_4(void);
extern void __put_user_8(void);
-#define __put_user_1(x, ptr) __asm__ __volatile__("call __put_user_1":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
-#define __put_user_2(x, ptr) __asm__ __volatile__("call __put_user_2":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
-#define __put_user_4(x, ptr) __asm__ __volatile__("call __put_user_4":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
-#define __put_user_8(x, ptr) __asm__ __volatile__("call __put_user_8":"=a" (__ret_pu):"A" ((typeof(*(ptr)))(x)), "c" (ptr))
-#define __put_user_X(x, ptr) __asm__ __volatile__("call __put_user_X":"=a" (__ret_pu):"c" (ptr))
+#define __put_user_1(x, ptr) \
+ asm volatile("call __put_user_1" : "=a" (__ret_pu) \
+ : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
+
+#define __put_user_2(x, ptr) \
+ asm volatile("call __put_user_2" : "=a" (__ret_pu) \
+ : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
+
+#define __put_user_4(x, ptr) \
+ asm volatile("call __put_user_4" : "=a" (__ret_pu) \
+ : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
+
+#define __put_user_8(x, ptr) \
+ asm volatile("call __put_user_8" : "=a" (__ret_pu) \
+ : "A" ((typeof(*(ptr)))(x)), "c" (ptr))
+
+#define __put_user_X(x, ptr) \
+ asm volatile("call __put_user_X" : "=a" (__ret_pu) \
+ : "c" (ptr))
/**
* put_user: - Write a simple value into user space.
@@ -195,32 +224,43 @@
*/
#ifdef CONFIG_X86_WP_WORKS_OK
-#define put_user(x,ptr) \
-({ int __ret_pu; \
+#define put_user(x, ptr) \
+({ \
+ int __ret_pu; \
__typeof__(*(ptr)) __pu_val; \
__chk_user_ptr(ptr); \
__pu_val = x; \
- switch(sizeof(*(ptr))) { \
- case 1: __put_user_1(__pu_val, ptr); break; \
- case 2: __put_user_2(__pu_val, ptr); break; \
- case 4: __put_user_4(__pu_val, ptr); break; \
- case 8: __put_user_8(__pu_val, ptr); break; \
- default:__put_user_X(__pu_val, ptr); break; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __put_user_1(__pu_val, ptr); \
+ break; \
+ case 2: \
+ __put_user_2(__pu_val, ptr); \
+ break; \
+ case 4: \
+ __put_user_4(__pu_val, ptr); \
+ break; \
+ case 8: \
+ __put_user_8(__pu_val, ptr); \
+ break; \
+ default: \
+ __put_user_X(__pu_val, ptr); \
+ break; \
} \
__ret_pu; \
})
#else
-#define put_user(x,ptr) \
+#define put_user(x, ptr) \
({ \
- int __ret_pu; \
- __typeof__(*(ptr)) __pus_tmp = x; \
- __ret_pu=0; \
- if(unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
- sizeof(*(ptr))) != 0)) \
- __ret_pu=-EFAULT; \
- __ret_pu; \
- })
+ int __ret_pu; \
+ __typeof__(*(ptr))__pus_tmp = x; \
+ __ret_pu = 0; \
+ if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
+ sizeof(*(ptr))) != 0)) \
+ __ret_pu = -EFAULT; \
+ __ret_pu; \
+})
#endif
@@ -245,8 +285,8 @@
* Returns zero on success, or -EFAULT on error.
* On error, the variable @x is set to zero.
*/
-#define __get_user(x,ptr) \
- __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+#define __get_user(x, ptr) \
+ __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
/**
@@ -268,54 +308,62 @@
*
* Returns zero on success, or -EFAULT on error.
*/
-#define __put_user(x,ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __put_user(x, ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-#define __put_user_nocheck(x,ptr,size) \
+#define __put_user_nocheck(x, ptr, size) \
({ \
long __pu_err; \
- __put_user_size((x),(ptr),(size),__pu_err,-EFAULT); \
+ __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \
__pu_err; \
})
-#define __put_user_u64(x, addr, err) \
- __asm__ __volatile__( \
- "1: movl %%eax,0(%2)\n" \
- "2: movl %%edx,4(%2)\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- "4: movl %3,%0\n" \
- " jmp 3b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b,4b) \
- _ASM_EXTABLE(2b,4b) \
- : "=r"(err) \
- : "A" (x), "r" (addr), "i"(-EFAULT), "0"(err))
+#define __put_user_u64(x, addr, err) \
+ asm volatile("1: movl %%eax,0(%2)\n" \
+ "2: movl %%edx,4(%2)\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "4: movl %3,%0\n" \
+ " jmp 3b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 4b) \
+ _ASM_EXTABLE(2b, 4b) \
+ : "=r" (err) \
+ : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
#ifdef CONFIG_X86_WP_WORKS_OK
-#define __put_user_size(x,ptr,size,retval,errret) \
+#define __put_user_size(x, ptr, size, retval, errret) \
do { \
retval = 0; \
__chk_user_ptr(ptr); \
switch (size) { \
- case 1: __put_user_asm(x,ptr,retval,"b","b","iq",errret);break; \
- case 2: __put_user_asm(x,ptr,retval,"w","w","ir",errret);break; \
- case 4: __put_user_asm(x,ptr,retval,"l","","ir",errret); break; \
- case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\
- default: __put_user_bad(); \
+ case 1: \
+ __put_user_asm(x, ptr, retval, "b", "b", "iq", errret); \
+ break; \
+ case 2: \
+ __put_user_asm(x, ptr, retval, "w", "w", "ir", errret); \
+ break; \
+ case 4: \
+ __put_user_asm(x, ptr, retval, "l", "", "ir", errret); \
+ break; \
+ case 8: \
+ __put_user_u64((__typeof__(*ptr))(x), ptr, retval); \
+ break; \
+ default: \
+ __put_user_bad(); \
} \
} while (0)
#else
-#define __put_user_size(x,ptr,size,retval,errret) \
+#define __put_user_size(x, ptr, size, retval, errret) \
do { \
- __typeof__(*(ptr)) __pus_tmp = x; \
+ __typeof__(*(ptr))__pus_tmp = x; \
retval = 0; \
\
- if(unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \
+ if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \
retval = errret; \
} while (0)
@@ -329,65 +377,70 @@
* aliasing issues.
*/
#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \
- __asm__ __volatile__( \
- "1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b,3b) \
- : "=r"(err) \
- : ltype (x), "m"(__m(addr)), "i"(errret), "0"(err))
+ asm volatile("1: mov"itype" %"rtype"1,%2\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: movl %3,%0\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r"(err) \
+ : ltype (x), "m" (__m(addr)), "i" (errret), "0" (err))
-#define __get_user_nocheck(x,ptr,size) \
-({ \
- long __gu_err; \
- unsigned long __gu_val; \
- __get_user_size(__gu_val,(ptr),(size),__gu_err,-EFAULT);\
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ long __gu_err; \
+ unsigned long __gu_val; \
+ __get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
})
extern long __get_user_bad(void);
-#define __get_user_size(x,ptr,size,retval,errret) \
+#define __get_user_size(x, ptr, size, retval, errret) \
do { \
retval = 0; \
__chk_user_ptr(ptr); \
switch (size) { \
- case 1: __get_user_asm(x,ptr,retval,"b","b","=q",errret);break; \
- case 2: __get_user_asm(x,ptr,retval,"w","w","=r",errret);break; \
- case 4: __get_user_asm(x,ptr,retval,"l","","=r",errret);break; \
- default: (x) = __get_user_bad(); \
+ case 1: \
+ __get_user_asm(x, ptr, retval, "b", "b", "=q", errret); \
+ break; \
+ case 2: \
+ __get_user_asm(x, ptr, retval, "w", "w", "=r", errret); \
+ break; \
+ case 4: \
+ __get_user_asm(x, ptr, retval, "l", "", "=r", errret); \
+ break; \
+ default: \
+ (x) = __get_user_bad(); \
} \
} while (0)
#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \
- __asm__ __volatile__( \
- "1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b,3b) \
- : "=r"(err), ltype (x) \
- : "m"(__m(addr)), "i"(errret), "0"(err))
+ asm volatile("1: mov"itype" %2,%"rtype"1\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: movl %3,%0\n" \
+ " xor"itype" %"rtype"1,%"rtype"1\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r" (err), ltype (x) \
+ : "m" (__m(addr)), "i" (errret), "0" (err))
-unsigned long __must_check __copy_to_user_ll(void __user *to,
- const void *from, unsigned long n);
-unsigned long __must_check __copy_from_user_ll(void *to,
- const void __user *from, unsigned long n);
-unsigned long __must_check __copy_from_user_ll_nozero(void *to,
- const void __user *from, unsigned long n);
-unsigned long __must_check __copy_from_user_ll_nocache(void *to,
- const void __user *from, unsigned long n);
-unsigned long __must_check __copy_from_user_ll_nocache_nozero(void *to,
- const void __user *from, unsigned long n);
+unsigned long __must_check __copy_to_user_ll
+ (void __user *to, const void *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll
+ (void *to, const void __user *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll_nozero
+ (void *to, const void __user *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll_nocache
+ (void *to, const void __user *from, unsigned long n);
+unsigned long __must_check __copy_from_user_ll_nocache_nozero
+ (void *to, const void __user *from, unsigned long n);
/**
* __copy_to_user_inatomic: - Copy a block of data into user space, with less checking.
@@ -416,13 +469,16 @@
switch (n) {
case 1:
- __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret, 1);
+ __put_user_size(*(u8 *)from, (u8 __user *)to,
+ 1, ret, 1);
return ret;
case 2:
- __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret, 2);
+ __put_user_size(*(u16 *)from, (u16 __user *)to,
+ 2, ret, 2);
return ret;
case 4:
- __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret, 4);
+ __put_user_size(*(u32 *)from, (u32 __user *)to,
+ 4, ret, 4);
return ret;
}
}
@@ -545,19 +601,21 @@
}
static __always_inline unsigned long
-__copy_from_user_inatomic_nocache(void *to, const void __user *from, unsigned long n)
+__copy_from_user_inatomic_nocache(void *to, const void __user *from,
+ unsigned long n)
{
return __copy_from_user_ll_nocache_nozero(to, from, n);
}
unsigned long __must_check copy_to_user(void __user *to,
- const void *from, unsigned long n);
+ const void *from, unsigned long n);
unsigned long __must_check copy_from_user(void *to,
- const void __user *from, unsigned long n);
+ const void __user *from,
+ unsigned long n);
long __must_check strncpy_from_user(char *dst, const char __user *src,
- long count);
+ long count);
long __must_check __strncpy_from_user(char *dst,
- const char __user *src, long count);
+ const char __user *src, long count);
/**
* strlen_user: - Get the size of a string in user space.
diff --git a/include/asm-x86/uaccess_64.h b/include/asm-x86/uaccess_64.h
index b87eb4b..b8a2f43 100644
--- a/include/asm-x86/uaccess_64.h
+++ b/include/asm-x86/uaccess_64.h
@@ -29,23 +29,27 @@
#define get_fs() (current_thread_info()->addr_limit)
#define set_fs(x) (current_thread_info()->addr_limit = (x))
-#define segment_eq(a,b) ((a).seg == (b).seg)
+#define segment_eq(a, b) ((a).seg == (b).seg)
-#define __addr_ok(addr) (!((unsigned long)(addr) & (current_thread_info()->addr_limit.seg)))
+#define __addr_ok(addr) (!((unsigned long)(addr) & \
+ (current_thread_info()->addr_limit.seg)))
/*
* Uhhuh, this needs 65-bit arithmetic. We have a carry..
*/
-#define __range_not_ok(addr,size) ({ \
- unsigned long flag,roksum; \
- __chk_user_ptr(addr); \
- asm("# range_ok\n\r" \
- "addq %3,%1 ; sbbq %0,%0 ; cmpq %1,%4 ; sbbq $0,%0" \
- :"=&r" (flag), "=r" (roksum) \
- :"1" (addr),"g" ((long)(size)),"g" (current_thread_info()->addr_limit.seg)); \
- flag; })
+#define __range_not_ok(addr, size) \
+({ \
+ unsigned long flag, roksum; \
+ __chk_user_ptr(addr); \
+ asm("# range_ok\n\r" \
+ "addq %3,%1 ; sbbq %0,%0 ; cmpq %1,%4 ; sbbq $0,%0" \
+ : "=&r" (flag), "=r" (roksum) \
+ : "1" (addr), "g" ((long)(size)), \
+ "g" (current_thread_info()->addr_limit.seg)); \
+ flag; \
+})
-#define access_ok(type, addr, size) (__range_not_ok(addr,size) == 0)
+#define access_ok(type, addr, size) (__range_not_ok(addr, size) == 0)
/*
* The exception table consists of pairs of addresses: the first is the
@@ -60,8 +64,7 @@
* on our cache or tlb entries.
*/
-struct exception_table_entry
-{
+struct exception_table_entry {
unsigned long insn, fixup;
};
@@ -84,23 +87,36 @@
* accesses to the same area of user memory).
*/
-#define __get_user_x(size,ret,x,ptr) \
- asm volatile("call __get_user_" #size \
- :"=a" (ret),"=d" (x) \
- :"c" (ptr) \
- :"r8")
+#define __get_user_x(size, ret, x, ptr) \
+ asm volatile("call __get_user_" #size \
+ : "=a" (ret),"=d" (x) \
+ : "c" (ptr) \
+ : "r8")
-/* Careful: we have to cast the result to the type of the pointer for sign reasons */
-#define get_user(x,ptr) \
-({ unsigned long __val_gu; \
- int __ret_gu; \
+/* Careful: we have to cast the result to the type of the pointer
+ * for sign reasons */
+
+#define get_user(x, ptr) \
+({ \
+ unsigned long __val_gu; \
+ int __ret_gu; \
__chk_user_ptr(ptr); \
- switch(sizeof (*(ptr))) { \
- case 1: __get_user_x(1,__ret_gu,__val_gu,ptr); break; \
- case 2: __get_user_x(2,__ret_gu,__val_gu,ptr); break; \
- case 4: __get_user_x(4,__ret_gu,__val_gu,ptr); break; \
- case 8: __get_user_x(8,__ret_gu,__val_gu,ptr); break; \
- default: __get_user_bad(); break; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_user_x(1, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 2: \
+ __get_user_x(2, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 4: \
+ __get_user_x(4, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 8: \
+ __get_user_x(8, __ret_gu, __val_gu, ptr); \
+ break; \
+ default: \
+ __get_user_bad(); \
+ break; \
} \
(x) = (__force typeof(*(ptr)))__val_gu; \
__ret_gu; \
@@ -112,55 +128,73 @@
extern void __put_user_8(void);
extern void __put_user_bad(void);
-#define __put_user_x(size,ret,x,ptr) \
- asm volatile("call __put_user_" #size \
- :"=a" (ret) \
- :"c" (ptr),"d" (x) \
- :"r8")
+#define __put_user_x(size, ret, x, ptr) \
+ asm volatile("call __put_user_" #size \
+ :"=a" (ret) \
+ :"c" (ptr),"d" (x) \
+ :"r8")
-#define put_user(x,ptr) \
- __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define put_user(x, ptr) \
+ __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-#define __get_user(x,ptr) \
- __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-#define __put_user(x,ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x, ptr) \
+ __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user(x, ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
#define __get_user_unaligned __get_user
#define __put_user_unaligned __put_user
-#define __put_user_nocheck(x,ptr,size) \
+#define __put_user_nocheck(x, ptr, size) \
({ \
int __pu_err; \
- __put_user_size((x),(ptr),(size),__pu_err); \
+ __put_user_size((x), (ptr), (size), __pu_err); \
__pu_err; \
})
-#define __put_user_check(x,ptr,size) \
-({ \
- int __pu_err; \
- typeof(*(ptr)) __user *__pu_addr = (ptr); \
- switch (size) { \
- case 1: __put_user_x(1,__pu_err,x,__pu_addr); break; \
- case 2: __put_user_x(2,__pu_err,x,__pu_addr); break; \
- case 4: __put_user_x(4,__pu_err,x,__pu_addr); break; \
- case 8: __put_user_x(8,__pu_err,x,__pu_addr); break; \
- default: __put_user_bad(); \
- } \
- __pu_err; \
+#define __put_user_check(x, ptr, size) \
+({ \
+ int __pu_err; \
+ typeof(*(ptr)) __user *__pu_addr = (ptr); \
+ switch (size) { \
+ case 1: \
+ __put_user_x(1, __pu_err, x, __pu_addr); \
+ break; \
+ case 2: \
+ __put_user_x(2, __pu_err, x, __pu_addr); \
+ break; \
+ case 4: \
+ __put_user_x(4, __pu_err, x, __pu_addr); \
+ break; \
+ case 8: \
+ __put_user_x(8, __pu_err, x, __pu_addr); \
+ break; \
+ default: \
+ __put_user_bad(); \
+ } \
+ __pu_err; \
})
-#define __put_user_size(x,ptr,size,retval) \
+#define __put_user_size(x, ptr, size, retval) \
do { \
retval = 0; \
__chk_user_ptr(ptr); \
switch (size) { \
- case 1: __put_user_asm(x,ptr,retval,"b","b","iq",-EFAULT); break;\
- case 2: __put_user_asm(x,ptr,retval,"w","w","ir",-EFAULT); break;\
- case 4: __put_user_asm(x,ptr,retval,"l","k","ir",-EFAULT); break;\
- case 8: __put_user_asm(x,ptr,retval,"q","","Zr",-EFAULT); break;\
- default: __put_user_bad(); \
+ case 1: \
+ __put_user_asm(x, ptr, retval, "b", "b", "iq", -EFAULT);\
+ break; \
+ case 2: \
+ __put_user_asm(x, ptr, retval, "w", "w", "ir", -EFAULT);\
+ break; \
+ case 4: \
+ __put_user_asm(x, ptr, retval, "l", "k", "ir", -EFAULT);\
+ break; \
+ case 8: \
+ __put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT); \
+ break; \
+ default: \
+ __put_user_bad(); \
} \
} while (0)
@@ -174,23 +208,22 @@
* aliasing issues.
*/
#define __put_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- asm volatile( \
- "1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: mov %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b,3b) \
- : "=r"(err) \
- : ltype (x), "m"(__m(addr)), "i"(errno), "0"(err))
+ asm volatile("1: mov"itype" %"rtype"1,%2\n" \
+ "2:\n" \
+ ".section .fixup, \"ax\"\n" \
+ "3: mov %3,%0\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r"(err) \
+ : ltype (x), "m" (__m(addr)), "i" (errno), "0" (err))
-#define __get_user_nocheck(x,ptr,size) \
+#define __get_user_nocheck(x, ptr, size) \
({ \
int __gu_err; \
unsigned long __gu_val; \
- __get_user_size(__gu_val,(ptr),(size),__gu_err); \
+ __get_user_size(__gu_val, (ptr), (size), __gu_err); \
(x) = (__force typeof(*(ptr)))__gu_val; \
__gu_err; \
})
@@ -201,31 +234,39 @@
extern int __get_user_8(void);
extern int __get_user_bad(void);
-#define __get_user_size(x,ptr,size,retval) \
+#define __get_user_size(x, ptr, size, retval) \
do { \
retval = 0; \
__chk_user_ptr(ptr); \
switch (size) { \
- case 1: __get_user_asm(x,ptr,retval,"b","b","=q",-EFAULT); break;\
- case 2: __get_user_asm(x,ptr,retval,"w","w","=r",-EFAULT); break;\
- case 4: __get_user_asm(x,ptr,retval,"l","k","=r",-EFAULT); break;\
- case 8: __get_user_asm(x,ptr,retval,"q","","=r",-EFAULT); break;\
- default: (x) = __get_user_bad(); \
+ case 1: \
+ __get_user_asm(x, ptr, retval, "b", "b", "=q", -EFAULT);\
+ break; \
+ case 2: \
+ __get_user_asm(x, ptr, retval, "w", "w", "=r", -EFAULT);\
+ break; \
+ case 4: \
+ __get_user_asm(x, ptr, retval, "l", "k", "=r", -EFAULT);\
+ break; \
+ case 8: \
+ __get_user_asm(x, ptr, retval, "q", "", "=r", -EFAULT); \
+ break; \
+ default: \
+ (x) = __get_user_bad(); \
} \
} while (0)
#define __get_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- asm volatile( \
- "1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: mov %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b,3b) \
- : "=r"(err), ltype (x) \
- : "m"(__m(addr)), "i"(errno), "0"(err))
+ asm volatile("1: mov"itype" %2,%"rtype"1\n" \
+ "2:\n" \
+ ".section .fixup, \"ax\"\n" \
+ "3: mov %3,%0\n" \
+ " xor"itype" %"rtype"1,%"rtype"1\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r" (err), ltype (x) \
+ : "m" (__m(addr)), "i"(errno), "0"(err))
/*
* Copy To/From Userspace
@@ -244,110 +285,142 @@
static __always_inline __must_check
int __copy_from_user(void *dst, const void __user *src, unsigned size)
-{
+{
int ret = 0;
if (!__builtin_constant_p(size))
- return copy_user_generic(dst,(__force void *)src,size);
- switch (size) {
- case 1:__get_user_asm(*(u8*)dst,(u8 __user *)src,ret,"b","b","=q",1);
+ return copy_user_generic(dst, (__force void *)src, size);
+ switch (size) {
+ case 1:__get_user_asm(*(u8 *)dst, (u8 __user *)src,
+ ret, "b", "b", "=q", 1);
return ret;
- case 2:__get_user_asm(*(u16*)dst,(u16 __user *)src,ret,"w","w","=r",2);
+ case 2:__get_user_asm(*(u16 *)dst, (u16 __user *)src,
+ ret, "w", "w", "=r", 2);
return ret;
- case 4:__get_user_asm(*(u32*)dst,(u32 __user *)src,ret,"l","k","=r",4);
+ case 4:__get_user_asm(*(u32 *)dst, (u32 __user *)src,
+ ret, "l", "k", "=r", 4);
return ret;
- case 8:__get_user_asm(*(u64*)dst,(u64 __user *)src,ret,"q","","=r",8);
- return ret;
+ case 8:__get_user_asm(*(u64 *)dst, (u64 __user *)src,
+ ret, "q", "", "=r", 8);
+ return ret;
case 10:
- __get_user_asm(*(u64*)dst,(u64 __user *)src,ret,"q","","=r",16);
- if (unlikely(ret)) return ret;
- __get_user_asm(*(u16*)(8+(char*)dst),(u16 __user *)(8+(char __user *)src),ret,"w","w","=r",2);
- return ret;
+ __get_user_asm(*(u64 *)dst, (u64 __user *)src,
+ ret, "q", "", "=r", 16);
+ if (unlikely(ret))
+ return ret;
+ __get_user_asm(*(u16 *)(8 + (char *)dst),
+ (u16 __user *)(8 + (char __user *)src),
+ ret, "w", "w", "=r", 2);
+ return ret;
case 16:
- __get_user_asm(*(u64*)dst,(u64 __user *)src,ret,"q","","=r",16);
- if (unlikely(ret)) return ret;
- __get_user_asm(*(u64*)(8+(char*)dst),(u64 __user *)(8+(char __user *)src),ret,"q","","=r",8);
- return ret;
+ __get_user_asm(*(u64 *)dst, (u64 __user *)src,
+ ret, "q", "", "=r", 16);
+ if (unlikely(ret))
+ return ret;
+ __get_user_asm(*(u64 *)(8 + (char *)dst),
+ (u64 __user *)(8 + (char __user *)src),
+ ret, "q", "", "=r", 8);
+ return ret;
default:
- return copy_user_generic(dst,(__force void *)src,size);
+ return copy_user_generic(dst, (__force void *)src, size);
}
-}
+}
static __always_inline __must_check
int __copy_to_user(void __user *dst, const void *src, unsigned size)
-{
+{
int ret = 0;
if (!__builtin_constant_p(size))
- return copy_user_generic((__force void *)dst,src,size);
- switch (size) {
- case 1:__put_user_asm(*(u8*)src,(u8 __user *)dst,ret,"b","b","iq",1);
+ return copy_user_generic((__force void *)dst, src, size);
+ switch (size) {
+ case 1:__put_user_asm(*(u8 *)src, (u8 __user *)dst,
+ ret, "b", "b", "iq", 1);
return ret;
- case 2:__put_user_asm(*(u16*)src,(u16 __user *)dst,ret,"w","w","ir",2);
+ case 2:__put_user_asm(*(u16 *)src, (u16 __user *)dst,
+ ret, "w", "w", "ir", 2);
return ret;
- case 4:__put_user_asm(*(u32*)src,(u32 __user *)dst,ret,"l","k","ir",4);
+ case 4:__put_user_asm(*(u32 *)src, (u32 __user *)dst,
+ ret, "l", "k", "ir", 4);
return ret;
- case 8:__put_user_asm(*(u64*)src,(u64 __user *)dst,ret,"q","","ir",8);
- return ret;
+ case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
+ ret, "q", "", "ir", 8);
+ return ret;
case 10:
- __put_user_asm(*(u64*)src,(u64 __user *)dst,ret,"q","","ir",10);
- if (unlikely(ret)) return ret;
+ __put_user_asm(*(u64 *)src, (u64 __user *)dst,
+ ret, "q", "", "ir", 10);
+ if (unlikely(ret))
+ return ret;
asm("":::"memory");
- __put_user_asm(4[(u16*)src],4+(u16 __user *)dst,ret,"w","w","ir",2);
- return ret;
+ __put_user_asm(4[(u16 *)src], 4 + (u16 __user *)dst,
+ ret, "w", "w", "ir", 2);
+ return ret;
case 16:
- __put_user_asm(*(u64*)src,(u64 __user *)dst,ret,"q","","ir",16);
- if (unlikely(ret)) return ret;
+ __put_user_asm(*(u64 *)src, (u64 __user *)dst,
+ ret, "q", "", "ir", 16);
+ if (unlikely(ret))
+ return ret;
asm("":::"memory");
- __put_user_asm(1[(u64*)src],1+(u64 __user *)dst,ret,"q","","ir",8);
- return ret;
+ __put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
+ ret, "q", "", "ir", 8);
+ return ret;
default:
- return copy_user_generic((__force void *)dst,src,size);
+ return copy_user_generic((__force void *)dst, src, size);
}
-}
+}
static __always_inline __must_check
int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
-{
+{
int ret = 0;
if (!__builtin_constant_p(size))
- return copy_user_generic((__force void *)dst,(__force void *)src,size);
- switch (size) {
- case 1: {
+ return copy_user_generic((__force void *)dst,
+ (__force void *)src, size);
+ switch (size) {
+ case 1: {
u8 tmp;
- __get_user_asm(tmp,(u8 __user *)src,ret,"b","b","=q",1);
+ __get_user_asm(tmp, (u8 __user *)src,
+ ret, "b", "b", "=q", 1);
if (likely(!ret))
- __put_user_asm(tmp,(u8 __user *)dst,ret,"b","b","iq",1);
+ __put_user_asm(tmp, (u8 __user *)dst,
+ ret, "b", "b", "iq", 1);
return ret;
}
- case 2: {
+ case 2: {
u16 tmp;
- __get_user_asm(tmp,(u16 __user *)src,ret,"w","w","=r",2);
+ __get_user_asm(tmp, (u16 __user *)src,
+ ret, "w", "w", "=r", 2);
if (likely(!ret))
- __put_user_asm(tmp,(u16 __user *)dst,ret,"w","w","ir",2);
+ __put_user_asm(tmp, (u16 __user *)dst,
+ ret, "w", "w", "ir", 2);
return ret;
}
- case 4: {
+ case 4: {
u32 tmp;
- __get_user_asm(tmp,(u32 __user *)src,ret,"l","k","=r",4);
+ __get_user_asm(tmp, (u32 __user *)src,
+ ret, "l", "k", "=r", 4);
if (likely(!ret))
- __put_user_asm(tmp,(u32 __user *)dst,ret,"l","k","ir",4);
+ __put_user_asm(tmp, (u32 __user *)dst,
+ ret, "l", "k", "ir", 4);
return ret;
}
- case 8: {
+ case 8: {
u64 tmp;
- __get_user_asm(tmp,(u64 __user *)src,ret,"q","","=r",8);
+ __get_user_asm(tmp, (u64 __user *)src,
+ ret, "q", "", "=r", 8);
if (likely(!ret))
- __put_user_asm(tmp,(u64 __user *)dst,ret,"q","","ir",8);
+ __put_user_asm(tmp, (u64 __user *)dst,
+ ret, "q", "", "ir", 8);
return ret;
}
default:
- return copy_user_generic((__force void *)dst,(__force void *)src,size);
+ return copy_user_generic((__force void *)dst,
+ (__force void *)src, size);
}
-}
+}
-__must_check long
+__must_check long
strncpy_from_user(char *dst, const char __user *src, long count);
-__must_check long
+__must_check long
__strncpy_from_user(char *dst, const char __user *src, long count);
__must_check long strnlen_user(const char __user *str, long n);
__must_check long __strnlen_user(const char __user *str, long n);
@@ -355,7 +428,8 @@
__must_check unsigned long clear_user(void __user *mem, unsigned long len);
__must_check unsigned long __clear_user(void __user *mem, unsigned long len);
-__must_check long __copy_from_user_inatomic(void *dst, const void __user *src, unsigned size);
+__must_check long __copy_from_user_inatomic(void *dst, const void __user *src,
+ unsigned size);
static __must_check __always_inline int
__copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
@@ -364,15 +438,19 @@
}
#define ARCH_HAS_NOCACHE_UACCESS 1
-extern long __copy_user_nocache(void *dst, const void __user *src, unsigned size, int zerorest);
+extern long __copy_user_nocache(void *dst, const void __user *src,
+ unsigned size, int zerorest);
-static inline int __copy_from_user_nocache(void *dst, const void __user *src, unsigned size)
+static inline int __copy_from_user_nocache(void *dst, const void __user *src,
+ unsigned size)
{
might_sleep();
return __copy_user_nocache(dst, src, size, 1);
}
-static inline int __copy_from_user_inatomic_nocache(void *dst, const void __user *src, unsigned size)
+static inline int __copy_from_user_inatomic_nocache(void *dst,
+ const void __user *src,
+ unsigned size)
{
return __copy_user_nocache(dst, src, size, 0);
}
diff --git a/include/asm-x86/unaligned.h b/include/asm-x86/unaligned.h
index 913598d..d270ffe 100644
--- a/include/asm-x86/unaligned.h
+++ b/include/asm-x86/unaligned.h
@@ -32,6 +32,6 @@
*
* Note that unaligned accesses can be very expensive on some architectures.
*/
-#define put_unaligned(val, ptr) ((void)( *(ptr) = (val) ))
+#define put_unaligned(val, ptr) ((void)(*(ptr) = (val)))
#endif /* _ASM_X86_UNALIGNED_H */
diff --git a/include/asm-x86/unistd.h b/include/asm-x86/unistd.h
index 2a58ed3..effc7ad 100644
--- a/include/asm-x86/unistd.h
+++ b/include/asm-x86/unistd.h
@@ -1,11 +1,5 @@
#ifdef __KERNEL__
-# ifdef CONFIG_X86_32
-# include "unistd_32.h"
-# else
-# include "unistd_64.h"
-# endif
-#else
-# ifdef __i386__
+# if defined(CONFIG_X86_32) || defined(__i386__)
# include "unistd_32.h"
# else
# include "unistd_64.h"
diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h
index 984123a..8317d94 100644
--- a/include/asm-x86/unistd_32.h
+++ b/include/asm-x86/unistd_32.h
@@ -81,7 +81,7 @@
#define __NR_sigpending 73
#define __NR_sethostname 74
#define __NR_setrlimit 75
-#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
+#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
#define __NR_getrusage 77
#define __NR_gettimeofday 78
#define __NR_settimeofday 79
diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h
index 3883ceb..fe26e36 100644
--- a/include/asm-x86/unistd_64.h
+++ b/include/asm-x86/unistd_64.h
@@ -2,7 +2,7 @@
#define _ASM_X86_64_UNISTD_H_
#ifndef __SYSCALL
-#define __SYSCALL(a,b)
+#define __SYSCALL(a, b)
#endif
/*
diff --git a/include/asm-x86/user32.h b/include/asm-x86/user32.h
index f769872..a3d9100 100644
--- a/include/asm-x86/user32.h
+++ b/include/asm-x86/user32.h
@@ -1,7 +1,8 @@
#ifndef USER32_H
#define USER32_H 1
-/* IA32 compatible user structures for ptrace. These should be used for 32bit coredumps too. */
+/* IA32 compatible user structures for ptrace.
+ * These should be used for 32bit coredumps too. */
struct user_i387_ia32_struct {
u32 cwd;
@@ -42,9 +43,9 @@
};
struct user32 {
- struct user_regs_struct32 regs; /* Where the registers are actually stored */
+ struct user_regs_struct32 regs; /* Where the registers are actually stored */
int u_fpvalid; /* True if math co-processor being used. */
- /* for this mess. Not yet used. */
+ /* for this mess. Not yet used. */
struct user_i387_ia32_struct i387; /* Math Co-processor registers. */
/* The rest of this junk is to help gdb figure out what goes where */
__u32 u_tsize; /* Text segment size (pages). */
diff --git a/include/asm-x86/user_32.h b/include/asm-x86/user_32.h
index 6157da6..d6e51ed 100644
--- a/include/asm-x86/user_32.h
+++ b/include/asm-x86/user_32.h
@@ -100,10 +100,10 @@
struct user{
/* We start with the registers, to mimic the way that "memory" is returned
from the ptrace(3,...) function. */
- struct user_regs_struct regs; /* Where the registers are actually stored */
+ struct user_regs_struct regs; /* Where the registers are actually stored */
/* ptrace does not yet supply these. Someday.... */
int u_fpvalid; /* True if math co-processor being used. */
- /* for this mess. Not yet used. */
+ /* for this mess. Not yet used. */
struct user_i387_struct i387; /* Math Co-processor registers. */
/* The rest of this junk is to help gdb figure out what goes where */
unsigned long int u_tsize; /* Text segment size (pages). */
@@ -118,7 +118,7 @@
int reserved; /* No longer used */
unsigned long u_ar0; /* Used by gdb to help find the values for */
/* the registers. */
- struct user_i387_struct* u_fpstate; /* Math Co-processor pointer. */
+ struct user_i387_struct *u_fpstate; /* Math Co-processor pointer. */
unsigned long magic; /* To uniquely identify a core file */
char u_comm[32]; /* User command that was responsible */
int u_debugreg[8];
diff --git a/include/asm-x86/user_64.h b/include/asm-x86/user_64.h
index 9636164..6037b63 100644
--- a/include/asm-x86/user_64.h
+++ b/include/asm-x86/user_64.h
@@ -45,12 +45,13 @@
*/
/* This matches the 64bit FXSAVE format as defined by AMD. It is the same
- as the 32bit format defined by Intel, except that the selector:offset pairs for
- data and eip are replaced with flat 64bit pointers. */
+ as the 32bit format defined by Intel, except that the selector:offset pairs
+ for data and eip are replaced with flat 64bit pointers. */
struct user_i387_struct {
unsigned short cwd;
unsigned short swd;
- unsigned short twd; /* Note this is not the same as the 32bit/x87/FSAVE twd */
+ unsigned short twd; /* Note this is not the same as
+ the 32bit/x87/FSAVE twd */
unsigned short fop;
__u64 rip;
__u64 rdp;
@@ -97,13 +98,14 @@
/* When the kernel dumps core, it starts by dumping the user struct -
this will be used by gdb to figure out where the data and stack segments
are within the file, and what virtual addresses to use. */
-struct user{
+
+struct user {
/* We start with the registers, to mimic the way that "memory" is returned
from the ptrace(3,...) function. */
- struct user_regs_struct regs; /* Where the registers are actually stored */
+ struct user_regs_struct regs; /* Where the registers are actually stored */
/* ptrace does not yet supply these. Someday.... */
int u_fpvalid; /* True if math co-processor being used. */
- /* for this mess. Not yet used. */
+ /* for this mess. Not yet used. */
int pad0;
struct user_i387_struct i387; /* Math Co-processor registers. */
/* The rest of this junk is to help gdb figure out what goes where */
@@ -120,7 +122,7 @@
int pad1;
unsigned long u_ar0; /* Used by gdb to help find the values for */
/* the registers. */
- struct user_i387_struct* u_fpstate; /* Math Co-processor pointer. */
+ struct user_i387_struct *u_fpstate; /* Math Co-processor pointer. */
unsigned long magic; /* To uniquely identify a core file */
char u_comm[32]; /* User command that was responsible */
unsigned long u_debugreg[8];
diff --git a/include/asm-x86/uv/uv_hub.h b/include/asm-x86/uv/uv_hub.h
new file mode 100644
index 0000000..26b9240
--- /dev/null
+++ b/include/asm-x86/uv/uv_hub.h
@@ -0,0 +1,284 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV architectural definitions
+ *
+ * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_X86_UV_HUB_H__
+#define __ASM_X86_UV_HUB_H__
+
+#include <linux/numa.h>
+#include <linux/percpu.h>
+#include <asm/types.h>
+#include <asm/percpu.h>
+
+
+/*
+ * Addressing Terminology
+ *
+ * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of
+ * routers always have low bit of 1, C/MBricks have low bit
+ * equal to 0. Most addressing macros that target UV hub chips
+ * right shift the NASID by 1 to exclude the always-zero bit.
+ *
+ * SNASID - NASID right shifted by 1 bit.
+ *
+ *
+ * Memory/UV-HUB Processor Socket Address Format:
+ * +--------+---------------+---------------------+
+ * |00..0000| SNASID | NodeOffset |
+ * +--------+---------------+---------------------+
+ * <--- N bits --->|<--------M bits ----->
+ *
+ * M number of node offset bits (35 .. 40)
+ * N number of SNASID bits (0 .. 10)
+ *
+ * Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64).
+ * The actual values are configuration dependent and are set at
+ * boot time
+ *
+ * APICID format
+ * NOTE!!!!!! This is the current format of the APICID. However, code
+ * should assume that this will change in the future. Use functions
+ * in this file for all APICID bit manipulations and conversion.
+ *
+ * 1111110000000000
+ * 5432109876543210
+ * nnnnnnnnnnlc0cch
+ * sssssssssss
+ *
+ * n = snasid bits
+ * l = socket number on board
+ * c = core
+ * h = hyperthread
+ * s = bits that are in the socket CSR
+ *
+ * Note: Processor only supports 12 bits in the APICID register. The ACPI
+ * tables hold all 16 bits. Software needs to be aware of this.
+ *
+ * Unless otherwise specified, all references to APICID refer to
+ * the FULL value contained in ACPI tables, not the subset in the
+ * processor APICID register.
+ */
+
+
+/*
+ * Maximum number of bricks in all partitions and in all coherency domains.
+ * This is the total number of bricks accessible in the numalink fabric. It
+ * includes all C & M bricks. Routers are NOT included.
+ *
+ * This value is also the value of the maximum number of non-router NASIDs
+ * in the numalink fabric.
+ *
+ * NOTE: a brick may be 1 or 2 OS nodes. Don't get these confused.
+ */
+#define UV_MAX_NUMALINK_BLADES 16384
+
+/*
+ * Maximum number of C/Mbricks within a software SSI (hardware may support
+ * more).
+ */
+#define UV_MAX_SSI_BLADES 256
+
+/*
+ * The largest possible NASID of a C or M brick (+ 2)
+ */
+#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2)
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced and are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct uv_hub_info_s {
+ unsigned long global_mmr_base;
+ unsigned short local_nasid;
+ unsigned short gnode_upper;
+ unsigned short coherency_domain_number;
+ unsigned short numa_blade_id;
+ unsigned char blade_processor_id;
+ unsigned char m_val;
+ unsigned char n_val;
+};
+DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+#define uv_hub_info (&__get_cpu_var(__uv_hub_info))
+#define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu))
+
+/*
+ * Local & Global MMR space macros.
+ * Note: macros are intended to be used ONLY by inline functions
+ * in this file - not by other kernel code.
+ */
+#define UV_SNASID(n) ((n) >> 1)
+#define UV_NASID(n) ((n) << 1)
+
+#define UV_LOCAL_MMR_BASE 0xf4000000UL
+#define UV_GLOBAL_MMR32_BASE 0xf8000000UL
+#define UV_GLOBAL_MMR64_BASE (uv_hub_info->global_mmr_base)
+
+#define UV_GLOBAL_MMR32_SNASID_MASK 0x3ff
+#define UV_GLOBAL_MMR32_SNASID_SHIFT 15
+#define UV_GLOBAL_MMR64_SNASID_SHIFT 26
+
+#define UV_GLOBAL_MMR32_NASID_BITS(n) \
+ (((UV_SNASID(n) & UV_GLOBAL_MMR32_SNASID_MASK)) << \
+ (UV_GLOBAL_MMR32_SNASID_SHIFT))
+
+#define UV_GLOBAL_MMR64_NASID_BITS(n) \
+ ((unsigned long)UV_SNASID(n) << UV_GLOBAL_MMR64_SNASID_SHIFT)
+
+#define UV_APIC_NASID_SHIFT 6
+
+/*
+ * Extract a NASID from an APICID (full apicid, not processor subset)
+ */
+static inline int uv_apicid_to_nasid(int apicid)
+{
+ return (UV_NASID(apicid >> UV_APIC_NASID_SHIFT));
+}
+
+/*
+ * Access global MMRs using the low memory MMR32 space. This region supports
+ * faster MMR access but not all MMRs are accessible in this space.
+ */
+static inline unsigned long *uv_global_mmr32_address(int nasid,
+ unsigned long offset)
+{
+ return __va(UV_GLOBAL_MMR32_BASE |
+ UV_GLOBAL_MMR32_NASID_BITS(nasid) | offset);
+}
+
+static inline void uv_write_global_mmr32(int nasid, unsigned long offset,
+ unsigned long val)
+{
+ *uv_global_mmr32_address(nasid, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr32(int nasid,
+ unsigned long offset)
+{
+ return *uv_global_mmr32_address(nasid, offset);
+}
+
+/*
+ * Access Global MMR space using the MMR space located at the top of physical
+ * memory.
+ */
+static inline unsigned long *uv_global_mmr64_address(int nasid,
+ unsigned long offset)
+{
+ return __va(UV_GLOBAL_MMR64_BASE |
+ UV_GLOBAL_MMR64_NASID_BITS(nasid) | offset);
+}
+
+static inline void uv_write_global_mmr64(int nasid, unsigned long offset,
+ unsigned long val)
+{
+ *uv_global_mmr64_address(nasid, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr64(int nasid,
+ unsigned long offset)
+{
+ return *uv_global_mmr64_address(nasid, offset);
+}
+
+/*
+ * Access node local MMRs. Faster than using global space but only local MMRs
+ * are accessible.
+ */
+static inline unsigned long *uv_local_mmr_address(unsigned long offset)
+{
+ return __va(UV_LOCAL_MMR_BASE | offset);
+}
+
+static inline unsigned long uv_read_local_mmr(unsigned long offset)
+{
+ return *uv_local_mmr_address(offset);
+}
+
+static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
+{
+ *uv_local_mmr_address(offset) = val;
+}
+
+/*
+ * Structures and definitions for converting between cpu, node, and blade
+ * numbers.
+ */
+struct uv_blade_info {
+ unsigned short nr_posible_cpus;
+ unsigned short nr_online_cpus;
+ unsigned short nasid;
+};
+struct uv_blade_info *uv_blade_info;
+extern short *uv_node_to_blade;
+extern short *uv_cpu_to_blade;
+extern short uv_possible_blades;
+
+/* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */
+static inline int uv_blade_processor_id(void)
+{
+ return uv_hub_info->blade_processor_id;
+}
+
+/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */
+static inline int uv_numa_blade_id(void)
+{
+ return uv_hub_info->numa_blade_id;
+}
+
+/* Convert a cpu number to the the UV blade number */
+static inline int uv_cpu_to_blade_id(int cpu)
+{
+ return uv_cpu_to_blade[cpu];
+}
+
+/* Convert linux node number to the UV blade number */
+static inline int uv_node_to_blade_id(int nid)
+{
+ return uv_node_to_blade[nid];
+}
+
+/* Convert a blade id to the NASID of the blade */
+static inline int uv_blade_to_nasid(int bid)
+{
+ return uv_blade_info[bid].nasid;
+}
+
+/* Determine the number of possible cpus on a blade */
+static inline int uv_blade_nr_possible_cpus(int bid)
+{
+ return uv_blade_info[bid].nr_posible_cpus;
+}
+
+/* Determine the number of online cpus on a blade */
+static inline int uv_blade_nr_online_cpus(int bid)
+{
+ return uv_blade_info[bid].nr_online_cpus;
+}
+
+/* Convert a cpu id to the NASID of the blade containing the cpu */
+static inline int uv_cpu_to_nasid(int cpu)
+{
+ return uv_blade_info[uv_cpu_to_blade_id(cpu)].nasid;
+}
+
+/* Convert a node number to the NASID of the blade */
+static inline int uv_node_to_nasid(int nid)
+{
+ return uv_blade_info[uv_node_to_blade_id(nid)].nasid;
+}
+
+/* Maximum possible number of blades */
+static inline int uv_num_possible_blades(void)
+{
+ return uv_possible_blades;
+}
+
+#endif /* __ASM_X86_UV_HUB__ */
+
diff --git a/include/asm-x86/uv/uv_mmrs.h b/include/asm-x86/uv/uv_mmrs.h
new file mode 100644
index 0000000..3b69fe6
--- /dev/null
+++ b/include/asm-x86/uv/uv_mmrs.h
@@ -0,0 +1,373 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV MMR definitions
+ *
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_X86_UV_MMRS__
+#define __ASM_X86_UV_MMRS__
+
+/*
+ * AUTO GENERATED - Do not edit
+ */
+
+ #define UV_MMR_ENABLE (1UL << 63)
+
+/* ========================================================================= */
+/* UVH_IPI_INT */
+/* ========================================================================= */
+#define UVH_IPI_INT 0x60500UL
+#define UVH_IPI_INT_32 0x0360
+
+#define UVH_IPI_INT_VECTOR_SHFT 0
+#define UVH_IPI_INT_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_IPI_INT_DELIVERY_MODE_SHFT 8
+#define UVH_IPI_INT_DELIVERY_MODE_MASK 0x0000000000000700UL
+#define UVH_IPI_INT_DESTMODE_SHFT 11
+#define UVH_IPI_INT_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_IPI_INT_APIC_ID_SHFT 16
+#define UVH_IPI_INT_APIC_ID_MASK 0x0000ffffffff0000UL
+#define UVH_IPI_INT_SEND_SHFT 63
+#define UVH_IPI_INT_SEND_MASK 0x8000000000000000UL
+
+union uvh_ipi_int_u {
+ unsigned long v;
+ struct uvh_ipi_int_s {
+ unsigned long vector_ : 8; /* RW */
+ unsigned long delivery_mode : 3; /* RW */
+ unsigned long destmode : 1; /* RW */
+ unsigned long rsvd_12_15 : 4; /* */
+ unsigned long apic_id : 32; /* RW */
+ unsigned long rsvd_48_62 : 15; /* */
+ unsigned long send : 1; /* WP */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x009f0
+
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_SHFT 4
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_MASK 0x000007fffffffff0UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_SHFT 49
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_MASK 0x7ffe000000000000UL
+
+union uvh_lb_bau_intd_payload_queue_first_u {
+ unsigned long v;
+ struct uvh_lb_bau_intd_payload_queue_first_s {
+ unsigned long rsvd_0_3: 4; /* */
+ unsigned long address : 39; /* RW */
+ unsigned long rsvd_43_48: 6; /* */
+ unsigned long node_id : 14; /* RW */
+ unsigned long rsvd_63 : 1; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x009f8
+
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_SHFT 4
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_MASK 0x000007fffffffff0UL
+
+union uvh_lb_bau_intd_payload_queue_last_u {
+ unsigned long v;
+ struct uvh_lb_bau_intd_payload_queue_last_s {
+ unsigned long rsvd_0_3: 4; /* */
+ unsigned long address : 39; /* RW */
+ unsigned long rsvd_43_63: 21; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x00a00
+
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_SHFT 4
+#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_MASK 0x000007fffffffff0UL
+
+union uvh_lb_bau_intd_payload_queue_tail_u {
+ unsigned long v;
+ struct uvh_lb_bau_intd_payload_queue_tail_s {
+ unsigned long rsvd_0_3: 4; /* */
+ unsigned long address : 39; /* RW */
+ unsigned long rsvd_43_63: 21; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL
+
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_MASK 0x0000000000000001UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_SHFT 1
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_MASK 0x0000000000000002UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_SHFT 2
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_MASK 0x0000000000000004UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_3_SHFT 3
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_3_MASK 0x0000000000000008UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_4_SHFT 4
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_4_MASK 0x0000000000000010UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_5_SHFT 5
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_5_MASK 0x0000000000000020UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_6_SHFT 6
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_6_MASK 0x0000000000000040UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_7_SHFT 7
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_7_MASK 0x0000000000000080UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_0_SHFT 8
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_0_MASK 0x0000000000000100UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_1_SHFT 9
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_1_MASK 0x0000000000000200UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_2_SHFT 10
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_2_MASK 0x0000000000000400UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_3_SHFT 11
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_3_MASK 0x0000000000000800UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_4_SHFT 12
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_4_MASK 0x0000000000001000UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_5_SHFT 13
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_5_MASK 0x0000000000002000UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_SHFT 14
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_MASK 0x0000000000004000UL
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_SHFT 15
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_MASK 0x0000000000008000UL
+union uvh_lb_bau_intd_software_acknowledge_u {
+ unsigned long v;
+ struct uvh_lb_bau_intd_software_acknowledge_s {
+ unsigned long pending_0 : 1; /* RW, W1C */
+ unsigned long pending_1 : 1; /* RW, W1C */
+ unsigned long pending_2 : 1; /* RW, W1C */
+ unsigned long pending_3 : 1; /* RW, W1C */
+ unsigned long pending_4 : 1; /* RW, W1C */
+ unsigned long pending_5 : 1; /* RW, W1C */
+ unsigned long pending_6 : 1; /* RW, W1C */
+ unsigned long pending_7 : 1; /* RW, W1C */
+ unsigned long timeout_0 : 1; /* RW, W1C */
+ unsigned long timeout_1 : 1; /* RW, W1C */
+ unsigned long timeout_2 : 1; /* RW, W1C */
+ unsigned long timeout_3 : 1; /* RW, W1C */
+ unsigned long timeout_4 : 1; /* RW, W1C */
+ unsigned long timeout_5 : 1; /* RW, W1C */
+ unsigned long timeout_6 : 1; /* RW, W1C */
+ unsigned long timeout_7 : 1; /* RW, W1C */
+ unsigned long rsvd_16_63: 48; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS */
+/* ========================================================================= */
+#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x0000000000320088UL
+
+/* ========================================================================= */
+/* UVH_LB_BAU_SB_ACTIVATION_CONTROL */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 0x009d8
+
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_SHFT 0
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_MASK 0x000000000000003fUL
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT 62
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_MASK 0x4000000000000000UL
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INIT_SHFT 63
+#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INIT_MASK 0x8000000000000000UL
+
+union uvh_lb_bau_sb_activation_control_u {
+ unsigned long v;
+ struct uvh_lb_bau_sb_activation_control_s {
+ unsigned long index : 6; /* RW */
+ unsigned long rsvd_6_61: 56; /* */
+ unsigned long push : 1; /* WP */
+ unsigned long init : 1; /* WP */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_LB_BAU_SB_ACTIVATION_STATUS_0 */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x009e0
+
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_SHFT 0
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_MASK 0xffffffffffffffffUL
+
+union uvh_lb_bau_sb_activation_status_0_u {
+ unsigned long v;
+ struct uvh_lb_bau_sb_activation_status_0_s {
+ unsigned long status : 64; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_LB_BAU_SB_ACTIVATION_STATUS_1 */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x009e8
+
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_SHFT 0
+#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_MASK 0xffffffffffffffffUL
+
+union uvh_lb_bau_sb_activation_status_1_u {
+ unsigned long v;
+ struct uvh_lb_bau_sb_activation_status_1_s {
+ unsigned long status : 64; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_LB_BAU_SB_DESCRIPTOR_BASE */
+/* ========================================================================= */
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 0x009d0
+
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_SHFT 12
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_MASK 0x000007fffffff000UL
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT 49
+#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK 0x7ffe000000000000UL
+
+union uvh_lb_bau_sb_descriptor_base_u {
+ unsigned long v;
+ struct uvh_lb_bau_sb_descriptor_base_s {
+ unsigned long rsvd_0_11 : 12; /* */
+ unsigned long page_address : 31; /* RW */
+ unsigned long rsvd_43_48 : 6; /* */
+ unsigned long node_id : 14; /* RW */
+ unsigned long rsvd_63 : 1; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_NODE_ID */
+/* ========================================================================= */
+#define UVH_NODE_ID 0x0UL
+
+#define UVH_NODE_ID_FORCE1_SHFT 0
+#define UVH_NODE_ID_FORCE1_MASK 0x0000000000000001UL
+#define UVH_NODE_ID_MANUFACTURER_SHFT 1
+#define UVH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL
+#define UVH_NODE_ID_PART_NUMBER_SHFT 12
+#define UVH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL
+#define UVH_NODE_ID_REVISION_SHFT 28
+#define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL
+#define UVH_NODE_ID_NODE_ID_SHFT 32
+#define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL
+#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48
+#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL
+#define UVH_NODE_ID_NI_PORT_SHFT 56
+#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL
+
+union uvh_node_id_u {
+ unsigned long v;
+ struct uvh_node_id_s {
+ unsigned long force1 : 1; /* RO */
+ unsigned long manufacturer : 11; /* RO */
+ unsigned long part_number : 16; /* RO */
+ unsigned long revision : 4; /* RO */
+ unsigned long node_id : 15; /* RW */
+ unsigned long rsvd_47 : 1; /* */
+ unsigned long nodes_per_bit : 7; /* RW */
+ unsigned long rsvd_55 : 1; /* */
+ unsigned long ni_port : 4; /* RO */
+ unsigned long rsvd_60_63 : 4; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
+
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 46
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0000400000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_gru_overlay_config_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_gru_overlay_config_mmr_s {
+ unsigned long rsvd_0_27: 28; /* */
+ unsigned long base : 18; /* RW */
+ unsigned long gr4 : 1; /* RW */
+ unsigned long rsvd_47_51: 5; /* */
+ unsigned long n_gru : 4; /* RW */
+ unsigned long rsvd_56_62: 7; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
+
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_mmr_overlay_config_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_mmr_overlay_config_mmr_s {
+ unsigned long rsvd_0_25: 26; /* */
+ unsigned long base : 20; /* RW */
+ unsigned long dual_hub : 1; /* RW */
+ unsigned long rsvd_47_62: 16; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RTC */
+/* ========================================================================= */
+#define UVH_RTC 0x28000UL
+
+#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0
+#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL
+
+union uvh_rtc_u {
+ unsigned long v;
+ struct uvh_rtc_s {
+ unsigned long real_time_clock : 56; /* RW */
+ unsigned long rsvd_56_63 : 8; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_SI_ADDR_MAP_CONFIG */
+/* ========================================================================= */
+#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
+
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
+
+union uvh_si_addr_map_config_u {
+ unsigned long v;
+ struct uvh_si_addr_map_config_s {
+ unsigned long m_skt : 6; /* RW */
+ unsigned long rsvd_6_7: 2; /* */
+ unsigned long n_skt : 4; /* RW */
+ unsigned long rsvd_12_63: 52; /* */
+ } s;
+};
+
+
+#endif /* __ASM_X86_UV_MMRS__ */
diff --git a/include/asm-x86/vdso.h b/include/asm-x86/vdso.h
index 629bcb6..86e085e 100644
--- a/include/asm-x86/vdso.h
+++ b/include/asm-x86/vdso.h
@@ -8,9 +8,11 @@
* Given a pointer to the vDSO image, find the pointer to VDSO64_name
* as that symbol is defined in the vDSO sources or linker script.
*/
-#define VDSO64_SYMBOL(base, name) ({ \
- extern const char VDSO64_##name[]; \
- (void *) (VDSO64_##name - VDSO64_PRELINK + (unsigned long) (base)); })
+#define VDSO64_SYMBOL(base, name) \
+({ \
+ extern const char VDSO64_##name[]; \
+ (void *)(VDSO64_##name - VDSO64_PRELINK + (unsigned long)(base)); \
+})
#endif
#if defined CONFIG_X86_32 || defined CONFIG_COMPAT
@@ -20,9 +22,18 @@
* Given a pointer to the vDSO image, find the pointer to VDSO32_name
* as that symbol is defined in the vDSO sources or linker script.
*/
-#define VDSO32_SYMBOL(base, name) ({ \
- extern const char VDSO32_##name[]; \
- (void *) (VDSO32_##name - VDSO32_PRELINK + (unsigned long) (base)); })
+#define VDSO32_SYMBOL(base, name) \
+({ \
+ extern const char VDSO32_##name[]; \
+ (void *)(VDSO32_##name - VDSO32_PRELINK + (unsigned long)(base)); \
+})
#endif
+/*
+ * These symbols are defined with the addresses in the vsyscall page.
+ * See vsyscall-sigreturn.S.
+ */
+extern void __user __kernel_sigreturn;
+extern void __user __kernel_rt_sigreturn;
+
#endif /* asm-x86/vdso.h */
diff --git a/include/asm-x86/vga.h b/include/asm-x86/vga.h
index 0ecf68a..0ccf804 100644
--- a/include/asm-x86/vga.h
+++ b/include/asm-x86/vga.h
@@ -12,9 +12,9 @@
* access the videoram directly without any black magic.
*/
-#define VGA_MAP_MEM(x,s) (unsigned long)phys_to_virt(x)
+#define VGA_MAP_MEM(x, s) (unsigned long)phys_to_virt(x)
#define vga_readb(x) (*(x))
-#define vga_writeb(x,y) (*(y) = (x))
+#define vga_writeb(x, y) (*(y) = (x))
#endif
diff --git a/include/asm-x86/vm86.h b/include/asm-x86/vm86.h
index c92fe4a..074b357 100644
--- a/include/asm-x86/vm86.h
+++ b/include/asm-x86/vm86.h
@@ -12,19 +12,13 @@
* Linus
*/
-#define TF_MASK 0x00000100
-#define IF_MASK 0x00000200
-#define IOPL_MASK 0x00003000
-#define NT_MASK 0x00004000
+#include <asm/processor-flags.h>
+
#ifdef CONFIG_VM86
-#define VM_MASK 0x00020000
+#define X86_VM_MASK X86_EFLAGS_VM
#else
-#define VM_MASK 0 /* ignored */
+#define X86_VM_MASK 0 /* No VM86 support */
#endif
-#define AC_MASK 0x00040000
-#define VIF_MASK 0x00080000 /* virtual interrupt flag */
-#define VIP_MASK 0x00100000 /* virtual interrupt pending */
-#define ID_MASK 0x00200000
#define BIOSSEG 0x0f000
@@ -42,9 +36,11 @@
#define VM86_ARG(retval) ((retval) >> 8)
#define VM86_SIGNAL 0 /* return due to signal */
-#define VM86_UNKNOWN 1 /* unhandled GP fault - IO-instruction or similar */
+#define VM86_UNKNOWN 1 /* unhandled GP fault
+ - IO-instruction or similar */
#define VM86_INTx 2 /* int3/int x instruction (ARG = x) */
-#define VM86_STI 3 /* sti/popf/iret instruction enabled virtual interrupts */
+#define VM86_STI 3 /* sti/popf/iret instruction enabled
+ virtual interrupts */
/*
* Additional return values when invoking new vm86()
@@ -205,7 +201,8 @@
#define handle_vm86_fault(a, b)
#define release_vm86_irqs(a)
-static inline int handle_vm86_trap(struct kernel_vm86_regs *a, long b, int c) {
+static inline int handle_vm86_trap(struct kernel_vm86_regs *a, long b, int c)
+{
return 0;
}
diff --git a/include/asm-x86/vmi.h b/include/asm-x86/vmi.h
index eb8bd89..b7c0dea 100644
--- a/include/asm-x86/vmi.h
+++ b/include/asm-x86/vmi.h
@@ -155,9 +155,9 @@
#ifndef __ASSEMBLY__
struct vmi_relocation_info {
- unsigned char *eip;
- unsigned char type;
- unsigned char reserved[3];
+ unsigned char *eip;
+ unsigned char type;
+ unsigned char reserved[3];
};
#endif
@@ -173,53 +173,53 @@
#ifndef __ASSEMBLY__
struct vrom_header {
- u16 rom_signature; // option ROM signature
- u8 rom_length; // ROM length in 512 byte chunks
- u8 rom_entry[4]; // 16-bit code entry point
- u8 rom_pad0; // 4-byte align pad
- u32 vrom_signature; // VROM identification signature
- u8 api_version_min;// Minor version of API
- u8 api_version_maj;// Major version of API
- u8 jump_slots; // Number of jump slots
- u8 reserved1; // Reserved for expansion
- u32 virtual_top; // Hypervisor virtual address start
- u16 reserved2; // Reserved for expansion
- u16 license_offs; // Offset to License string
- u16 pci_header_offs;// Offset to PCI OPROM header
- u16 pnp_header_offs;// Offset to PnP OPROM header
- u32 rom_pad3; // PnP reserverd / VMI reserved
- u8 reserved[96]; // Reserved for headers
- char vmi_init[8]; // VMI_Init jump point
- char get_reloc[8]; // VMI_GetRelocationInfo jump point
+ u16 rom_signature; /* option ROM signature */
+ u8 rom_length; /* ROM length in 512 byte chunks */
+ u8 rom_entry[4]; /* 16-bit code entry point */
+ u8 rom_pad0; /* 4-byte align pad */
+ u32 vrom_signature; /* VROM identification signature */
+ u8 api_version_min;/* Minor version of API */
+ u8 api_version_maj;/* Major version of API */
+ u8 jump_slots; /* Number of jump slots */
+ u8 reserved1; /* Reserved for expansion */
+ u32 virtual_top; /* Hypervisor virtual address start */
+ u16 reserved2; /* Reserved for expansion */
+ u16 license_offs; /* Offset to License string */
+ u16 pci_header_offs;/* Offset to PCI OPROM header */
+ u16 pnp_header_offs;/* Offset to PnP OPROM header */
+ u32 rom_pad3; /* PnP reserverd / VMI reserved */
+ u8 reserved[96]; /* Reserved for headers */
+ char vmi_init[8]; /* VMI_Init jump point */
+ char get_reloc[8]; /* VMI_GetRelocationInfo jump point */
} __attribute__((packed));
struct pnp_header {
- char sig[4];
- char rev;
- char size;
- short next;
- short res;
- long devID;
- unsigned short manufacturer_offset;
- unsigned short product_offset;
+ char sig[4];
+ char rev;
+ char size;
+ short next;
+ short res;
+ long devID;
+ unsigned short manufacturer_offset;
+ unsigned short product_offset;
} __attribute__((packed));
struct pci_header {
- char sig[4];
- short vendorID;
- short deviceID;
- short vpdData;
- short size;
- char rev;
- char class;
- char subclass;
- char interface;
- short chunks;
- char rom_version_min;
- char rom_version_maj;
- char codetype;
- char lastRom;
- short reserved;
+ char sig[4];
+ short vendorID;
+ short deviceID;
+ short vpdData;
+ short size;
+ char rev;
+ char class;
+ char subclass;
+ char interface;
+ short chunks;
+ char rom_version_min;
+ char rom_version_maj;
+ char codetype;
+ char lastRom;
+ short reserved;
} __attribute__((packed));
/* Function prototypes for bootstrapping */
diff --git a/include/asm-x86/voyager.h b/include/asm-x86/voyager.h
index 91a9932..9c811d2 100644
--- a/include/asm-x86/voyager.h
+++ b/include/asm-x86/voyager.h
@@ -91,8 +91,7 @@
#define VOYAGER_WRITE_CONFIG 0x2
#define VOYAGER_BYPASS 0xff
-typedef struct voyager_asic
-{
+typedef struct voyager_asic {
__u8 asic_addr; /* ASIC address; Level 4 */
__u8 asic_type; /* ASIC type */
__u8 asic_id; /* ASIC id */
@@ -113,7 +112,7 @@
__u16 largest_reg; /* Largest register in the scan path */
__u16 smallest_reg; /* Smallest register in the scan path */
voyager_asic_t *asic; /* First ASIC in scan path (CAT_I) */
- struct voyager_module *submodule; /* Submodule pointer */
+ struct voyager_module *submodule; /* Submodule pointer */
struct voyager_module *next; /* Next module in linked list */
} voyager_module_t;
@@ -135,7 +134,7 @@
__u16 cct_offset;
__u16 log_length; /* length of err log */
__u16 xsum_end; /* offset to end of
- checksum */
+ checksum */
__u8 reserved[4];
__u8 sflag; /* starting sentinal */
__u8 part_number[13]; /* prom part number */
@@ -148,7 +147,8 @@
-#define VOYAGER_EPROM_SIZE_OFFSET ((__u16)(&(((voyager_eprom_hdr_t *)0)->ee_size)))
+#define VOYAGER_EPROM_SIZE_OFFSET \
+ ((__u16)(&(((voyager_eprom_hdr_t *)0)->ee_size)))
#define VOYAGER_XSUM_END_OFFSET 0x2a
/* the following three definitions are for internal table layouts
@@ -199,7 +199,7 @@
#define VOYAGER_WCBIC_TOM_L 0x4
#define VOYAGER_WCBIC_TOM_H 0x5
-/* register defines for Voyager Memory Contol (VMC)
+/* register defines for Voyager Memory Contol (VMC)
* these are present on L4 machines only */
#define VOYAGER_VMC1 0x81
#define VOYAGER_VMC2 0x91
@@ -334,7 +334,7 @@
struct QuadDescription {
__u8 Type; /* for type 0 (DYADIC or MONADIC) all fields
- * will be zero except for slot */
+ * will be zero except for slot */
__u8 StructureVersion;
__u32 CPI_BaseAddress;
__u32 LARC_BankSize;
@@ -342,7 +342,7 @@
__u8 Slot; /* Processor slots 1 - 4 */
} __attribute__((packed));
-struct ProcBoardInfo {
+struct ProcBoardInfo {
__u8 Type;
__u8 StructureVersion;
__u8 NumberOfBoards;
@@ -382,19 +382,30 @@
* packed in it by our friend the compiler.
*/
typedef struct {
- __u8 Mailbox_SUS; /* Written to by SUS to give commands/response to the OS */
- __u8 Mailbox_OS; /* Written to by the OS to give commands/response to SUS */
- __u8 SUS_MailboxVersion; /* Tells the OS which iteration of the interface SUS supports */
- __u8 OS_MailboxVersion; /* Tells SUS which iteration of the interface the OS supports */
- __u32 OS_Flags; /* Flags set by the OS as info for SUS */
- __u32 SUS_Flags; /* Flags set by SUS as info for the OS */
- __u32 WatchDogPeriod; /* Watchdog period (in seconds) which the DP uses to see if the OS is dead */
+ __u8 Mailbox_SUS; /* Written to by SUS to give
+ commands/response to the OS */
+ __u8 Mailbox_OS; /* Written to by the OS to give
+ commands/response to SUS */
+ __u8 SUS_MailboxVersion; /* Tells the OS which iteration of the
+ interface SUS supports */
+ __u8 OS_MailboxVersion; /* Tells SUS which iteration of the
+ interface the OS supports */
+ __u32 OS_Flags; /* Flags set by the OS as info for
+ SUS */
+ __u32 SUS_Flags; /* Flags set by SUS as info
+ for the OS */
+ __u32 WatchDogPeriod; /* Watchdog period (in seconds) which
+ the DP uses to see if the OS
+ is dead */
__u32 WatchDogCount; /* Updated by the OS on every tic. */
- __u32 MemoryFor_SUS_ErrorLog; /* Flat 32 bit address which tells SUS where to stuff the SUS error log on a dump */
- MC_SlotInformation_t MC_SlotInfo[NUMBER_OF_MC_BUSSES*SLOTS_PER_MC_BUS]; /* Storage for MCA POS data */
+ __u32 MemoryFor_SUS_ErrorLog; /* Flat 32 bit address which tells SUS
+ where to stuff the SUS error log
+ on a dump */
+ MC_SlotInformation_t MC_SlotInfo[NUMBER_OF_MC_BUSSES*SLOTS_PER_MC_BUS];
+ /* Storage for MCA POS data */
/* All new SECOND_PASS_INTERFACE fields added from this point */
- struct ProcBoardInfo *BoardData;
- struct CPU_Info *CPU_Data;
+ struct ProcBoardInfo *BoardData;
+ struct CPU_Info *CPU_Data;
/* All new fields must be added from this point */
} Voyager_KernelSUS_Mbox_t;
@@ -478,7 +489,7 @@
__u32 SUS_errorlog;
/* lots of system configuration stuff under here */
};
-
+
/* Variables exported by voyager_smp */
extern __u32 voyager_extended_vic_processors;
extern __u32 voyager_allowed_boot_processors;
diff --git a/include/asm-x86/xor_32.h b/include/asm-x86/xor_32.h
index a41ef1b..067b5c1 100644
--- a/include/asm-x86/xor_32.h
+++ b/include/asm-x86/xor_32.h
@@ -16,12 +16,12 @@
* Copyright (C) 1998 Ingo Molnar.
*/
-#define LD(x,y) " movq 8*("#x")(%1), %%mm"#y" ;\n"
-#define ST(x,y) " movq %%mm"#y", 8*("#x")(%1) ;\n"
-#define XO1(x,y) " pxor 8*("#x")(%2), %%mm"#y" ;\n"
-#define XO2(x,y) " pxor 8*("#x")(%3), %%mm"#y" ;\n"
-#define XO3(x,y) " pxor 8*("#x")(%4), %%mm"#y" ;\n"
-#define XO4(x,y) " pxor 8*("#x")(%5), %%mm"#y" ;\n"
+#define LD(x, y) " movq 8*("#x")(%1), %%mm"#y" ;\n"
+#define ST(x, y) " movq %%mm"#y", 8*("#x")(%1) ;\n"
+#define XO1(x, y) " pxor 8*("#x")(%2), %%mm"#y" ;\n"
+#define XO2(x, y) " pxor 8*("#x")(%3), %%mm"#y" ;\n"
+#define XO3(x, y) " pxor 8*("#x")(%4), %%mm"#y" ;\n"
+#define XO4(x, y) " pxor 8*("#x")(%5), %%mm"#y" ;\n"
#include <asm/i387.h>
@@ -32,24 +32,24 @@
kernel_fpu_begin();
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
-#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- XO1(i,0) \
- ST(i,0) \
- XO1(i+1,1) \
- ST(i+1,1) \
- XO1(i+2,2) \
- ST(i+2,2) \
- XO1(i+3,3) \
- ST(i+3,3)
+#define BLOCK(i) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
+ XO1(i, 0) \
+ ST(i, 0) \
+ XO1(i+1, 1) \
+ ST(i+1, 1) \
+ XO1(i + 2, 2) \
+ ST(i + 2, 2) \
+ XO1(i + 3, 3) \
+ ST(i + 3, 3)
" .align 32 ;\n"
- " 1: ;\n"
+ " 1: ;\n"
BLOCK(0)
BLOCK(4)
@@ -76,25 +76,25 @@
kernel_fpu_begin();
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
-#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- XO2(i,0) \
- ST(i,0) \
- XO2(i+1,1) \
- ST(i+1,1) \
- XO2(i+2,2) \
- ST(i+2,2) \
- XO2(i+3,3) \
- ST(i+3,3)
+#define BLOCK(i) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
+ XO2(i, 0) \
+ ST(i, 0) \
+ XO2(i + 1, 1) \
+ ST(i + 1, 1) \
+ XO2(i + 2, 2) \
+ ST(i + 2, 2) \
+ XO2(i + 3, 3) \
+ ST(i + 3, 3)
" .align 32 ;\n"
" 1: ;\n"
@@ -125,29 +125,29 @@
kernel_fpu_begin();
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
-#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
- XO3(i,0) \
- ST(i,0) \
- XO3(i+1,1) \
- ST(i+1,1) \
- XO3(i+2,2) \
- ST(i+2,2) \
- XO3(i+3,3) \
- ST(i+3,3)
+#define BLOCK(i) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
+ XO2(i, 0) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
+ XO3(i, 0) \
+ ST(i, 0) \
+ XO3(i + 1, 1) \
+ ST(i + 1, 1) \
+ XO3(i + 2, 2) \
+ ST(i + 2, 2) \
+ XO3(i + 3, 3) \
+ ST(i + 3, 3)
" .align 32 ;\n"
" 1: ;\n"
@@ -186,35 +186,35 @@
because we modify p4 and p5 there, but we can't mark them
as read/write, otherwise we'd overflow the 10-asm-operands
limit of GCC < 3.1. */
- __asm__ ("" : "+r" (p4), "+r" (p5));
+ asm("" : "+r" (p4), "+r" (p5));
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
-#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
- XO3(i,0) \
- XO3(i+1,1) \
- XO3(i+2,2) \
- XO3(i+3,3) \
- XO4(i,0) \
- ST(i,0) \
- XO4(i+1,1) \
- ST(i+1,1) \
- XO4(i+2,2) \
- ST(i+2,2) \
- XO4(i+3,3) \
- ST(i+3,3)
+#define BLOCK(i) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
+ XO2(i, 0) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
+ XO3(i, 0) \
+ XO3(i + 1, 1) \
+ XO3(i + 2, 2) \
+ XO3(i + 3, 3) \
+ XO4(i, 0) \
+ ST(i, 0) \
+ XO4(i + 1, 1) \
+ ST(i + 1, 1) \
+ XO4(i + 2, 2) \
+ ST(i + 2, 2) \
+ XO4(i + 3, 3) \
+ ST(i + 3, 3)
" .align 32 ;\n"
" 1: ;\n"
@@ -233,13 +233,13 @@
" jnz 1b ;\n"
: "+r" (lines),
"+r" (p1), "+r" (p2), "+r" (p3)
- : "r" (p4), "r" (p5)
+ : "r" (p4), "r" (p5)
: "memory");
/* p4 and p5 were modified, and now the variables are dead.
Clobber them just to be sure nobody does something stupid
like assuming they have some legal value. */
- __asm__ ("" : "=r" (p4), "=r" (p5));
+ asm("" : "=r" (p4), "=r" (p5));
kernel_fpu_end();
}
@@ -259,7 +259,7 @@
kernel_fpu_begin();
- __asm__ __volatile__ (
+ asm volatile(
" .align 32 ;\n"
" 1: ;\n"
" movq (%1), %%mm0 ;\n"
@@ -286,7 +286,7 @@
" pxor 56(%2), %%mm7 ;\n"
" movq %%mm6, 48(%1) ;\n"
" movq %%mm7, 56(%1) ;\n"
-
+
" addl $64, %1 ;\n"
" addl $64, %2 ;\n"
" decl %0 ;\n"
@@ -307,7 +307,7 @@
kernel_fpu_begin();
- __asm__ __volatile__ (
+ asm volatile(
" .align 32,0x90 ;\n"
" 1: ;\n"
" movq (%1), %%mm0 ;\n"
@@ -342,7 +342,7 @@
" pxor 56(%3), %%mm7 ;\n"
" movq %%mm6, 48(%1) ;\n"
" movq %%mm7, 56(%1) ;\n"
-
+
" addl $64, %1 ;\n"
" addl $64, %2 ;\n"
" addl $64, %3 ;\n"
@@ -364,7 +364,7 @@
kernel_fpu_begin();
- __asm__ __volatile__ (
+ asm volatile(
" .align 32,0x90 ;\n"
" 1: ;\n"
" movq (%1), %%mm0 ;\n"
@@ -407,7 +407,7 @@
" pxor 56(%4), %%mm7 ;\n"
" movq %%mm6, 48(%1) ;\n"
" movq %%mm7, 56(%1) ;\n"
-
+
" addl $64, %1 ;\n"
" addl $64, %2 ;\n"
" addl $64, %3 ;\n"
@@ -436,9 +436,9 @@
because we modify p4 and p5 there, but we can't mark them
as read/write, otherwise we'd overflow the 10-asm-operands
limit of GCC < 3.1. */
- __asm__ ("" : "+r" (p4), "+r" (p5));
+ asm("" : "+r" (p4), "+r" (p5));
- __asm__ __volatile__ (
+ asm volatile(
" .align 32,0x90 ;\n"
" 1: ;\n"
" movq (%1), %%mm0 ;\n"
@@ -489,7 +489,7 @@
" pxor 56(%5), %%mm7 ;\n"
" movq %%mm6, 48(%1) ;\n"
" movq %%mm7, 56(%1) ;\n"
-
+
" addl $64, %1 ;\n"
" addl $64, %2 ;\n"
" addl $64, %3 ;\n"
@@ -505,7 +505,7 @@
/* p4 and p5 were modified, and now the variables are dead.
Clobber them just to be sure nobody does something stupid
like assuming they have some legal value. */
- __asm__ ("" : "=r" (p4), "=r" (p5));
+ asm("" : "=r" (p4), "=r" (p5));
kernel_fpu_end();
}
@@ -531,11 +531,12 @@
* Copyright (C) 1999 Zach Brown (with obvious credit due Ingo)
*/
-#define XMMS_SAVE do { \
+#define XMMS_SAVE \
+do { \
preempt_disable(); \
cr0 = read_cr0(); \
clts(); \
- __asm__ __volatile__ ( \
+ asm volatile( \
"movups %%xmm0,(%0) ;\n\t" \
"movups %%xmm1,0x10(%0) ;\n\t" \
"movups %%xmm2,0x20(%0) ;\n\t" \
@@ -543,10 +544,11 @@
: \
: "r" (xmm_save) \
: "memory"); \
-} while(0)
+} while (0)
-#define XMMS_RESTORE do { \
- __asm__ __volatile__ ( \
+#define XMMS_RESTORE \
+do { \
+ asm volatile( \
"sfence ;\n\t" \
"movups (%0),%%xmm0 ;\n\t" \
"movups 0x10(%0),%%xmm1 ;\n\t" \
@@ -557,76 +559,76 @@
: "memory"); \
write_cr0(cr0); \
preempt_enable(); \
-} while(0)
+} while (0)
#define ALIGN16 __attribute__((aligned(16)))
#define OFFS(x) "16*("#x")"
#define PF_OFFS(x) "256+16*("#x")"
#define PF0(x) " prefetchnta "PF_OFFS(x)"(%1) ;\n"
-#define LD(x,y) " movaps "OFFS(x)"(%1), %%xmm"#y" ;\n"
-#define ST(x,y) " movaps %%xmm"#y", "OFFS(x)"(%1) ;\n"
+#define LD(x, y) " movaps "OFFS(x)"(%1), %%xmm"#y" ;\n"
+#define ST(x, y) " movaps %%xmm"#y", "OFFS(x)"(%1) ;\n"
#define PF1(x) " prefetchnta "PF_OFFS(x)"(%2) ;\n"
#define PF2(x) " prefetchnta "PF_OFFS(x)"(%3) ;\n"
#define PF3(x) " prefetchnta "PF_OFFS(x)"(%4) ;\n"
#define PF4(x) " prefetchnta "PF_OFFS(x)"(%5) ;\n"
#define PF5(x) " prefetchnta "PF_OFFS(x)"(%6) ;\n"
-#define XO1(x,y) " xorps "OFFS(x)"(%2), %%xmm"#y" ;\n"
-#define XO2(x,y) " xorps "OFFS(x)"(%3), %%xmm"#y" ;\n"
-#define XO3(x,y) " xorps "OFFS(x)"(%4), %%xmm"#y" ;\n"
-#define XO4(x,y) " xorps "OFFS(x)"(%5), %%xmm"#y" ;\n"
-#define XO5(x,y) " xorps "OFFS(x)"(%6), %%xmm"#y" ;\n"
+#define XO1(x, y) " xorps "OFFS(x)"(%2), %%xmm"#y" ;\n"
+#define XO2(x, y) " xorps "OFFS(x)"(%3), %%xmm"#y" ;\n"
+#define XO3(x, y) " xorps "OFFS(x)"(%4), %%xmm"#y" ;\n"
+#define XO4(x, y) " xorps "OFFS(x)"(%5), %%xmm"#y" ;\n"
+#define XO5(x, y) " xorps "OFFS(x)"(%6), %%xmm"#y" ;\n"
static void
xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
{
- unsigned long lines = bytes >> 8;
+ unsigned long lines = bytes >> 8;
char xmm_save[16*4] ALIGN16;
int cr0;
XMMS_SAVE;
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
-#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
+#define BLOCK(i) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
PF1(i) \
- PF1(i+2) \
- LD(i+2,2) \
- LD(i+3,3) \
- PF0(i+4) \
- PF0(i+6) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
+ PF1(i + 2) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
+ PF0(i + 4) \
+ PF0(i + 6) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
+ ST(i, 0) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
PF0(0)
PF0(2)
" .align 32 ;\n"
- " 1: ;\n"
+ " 1: ;\n"
BLOCK(0)
BLOCK(4)
BLOCK(8)
BLOCK(12)
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
+ " addl $256, %1 ;\n"
+ " addl $256, %2 ;\n"
+ " decl %0 ;\n"
+ " jnz 1b ;\n"
: "+r" (lines),
"+r" (p1), "+r" (p2)
:
- : "memory");
+ : "memory");
XMMS_RESTORE;
}
@@ -635,59 +637,59 @@
xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
unsigned long *p3)
{
- unsigned long lines = bytes >> 8;
+ unsigned long lines = bytes >> 8;
char xmm_save[16*4] ALIGN16;
int cr0;
XMMS_SAVE;
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
#define BLOCK(i) \
PF1(i) \
- PF1(i+2) \
+ PF1(i + 2) \
LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
PF2(i) \
- PF2(i+2) \
- PF0(i+4) \
- PF0(i+6) \
+ PF2(i + 2) \
+ PF0(i + 4) \
+ PF0(i + 6) \
XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
PF0(0)
PF0(2)
" .align 32 ;\n"
- " 1: ;\n"
+ " 1: ;\n"
BLOCK(0)
BLOCK(4)
BLOCK(8)
BLOCK(12)
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " addl $256, %3 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
+ " addl $256, %1 ;\n"
+ " addl $256, %2 ;\n"
+ " addl $256, %3 ;\n"
+ " decl %0 ;\n"
+ " jnz 1b ;\n"
: "+r" (lines),
"+r" (p1), "+r"(p2), "+r"(p3)
:
- : "memory" );
+ : "memory" );
XMMS_RESTORE;
}
@@ -696,66 +698,66 @@
xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
unsigned long *p3, unsigned long *p4)
{
- unsigned long lines = bytes >> 8;
+ unsigned long lines = bytes >> 8;
char xmm_save[16*4] ALIGN16;
int cr0;
XMMS_SAVE;
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
#define BLOCK(i) \
PF1(i) \
- PF1(i+2) \
+ PF1(i + 2) \
LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
PF2(i) \
- PF2(i+2) \
+ PF2(i + 2) \
XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
PF3(i) \
- PF3(i+2) \
- PF0(i+4) \
- PF0(i+6) \
+ PF3(i + 2) \
+ PF0(i + 4) \
+ PF0(i + 6) \
XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
XO3(i,0) \
- XO3(i+1,1) \
- XO3(i+2,2) \
- XO3(i+3,3) \
+ XO3(i + 1, 1) \
+ XO3(i + 2, 2) \
+ XO3(i + 3, 3) \
ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
PF0(0)
PF0(2)
" .align 32 ;\n"
- " 1: ;\n"
+ " 1: ;\n"
BLOCK(0)
BLOCK(4)
BLOCK(8)
BLOCK(12)
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " addl $256, %3 ;\n"
- " addl $256, %4 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
+ " addl $256, %1 ;\n"
+ " addl $256, %2 ;\n"
+ " addl $256, %3 ;\n"
+ " addl $256, %4 ;\n"
+ " decl %0 ;\n"
+ " jnz 1b ;\n"
: "+r" (lines),
"+r" (p1), "+r" (p2), "+r" (p3), "+r" (p4)
:
- : "memory" );
+ : "memory" );
XMMS_RESTORE;
}
@@ -764,7 +766,7 @@
xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
unsigned long *p3, unsigned long *p4, unsigned long *p5)
{
- unsigned long lines = bytes >> 8;
+ unsigned long lines = bytes >> 8;
char xmm_save[16*4] ALIGN16;
int cr0;
@@ -776,65 +778,65 @@
because we modify p4 and p5 there, but we can't mark them
as read/write, otherwise we'd overflow the 10-asm-operands
limit of GCC < 3.1. */
- __asm__ ("" : "+r" (p4), "+r" (p5));
+ asm("" : "+r" (p4), "+r" (p5));
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
#define BLOCK(i) \
PF1(i) \
- PF1(i+2) \
+ PF1(i + 2) \
LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
PF2(i) \
- PF2(i+2) \
+ PF2(i + 2) \
XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
PF3(i) \
- PF3(i+2) \
+ PF3(i + 2) \
XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
PF4(i) \
- PF4(i+2) \
- PF0(i+4) \
- PF0(i+6) \
+ PF4(i + 2) \
+ PF0(i + 4) \
+ PF0(i + 6) \
XO3(i,0) \
- XO3(i+1,1) \
- XO3(i+2,2) \
- XO3(i+3,3) \
+ XO3(i + 1, 1) \
+ XO3(i + 2, 2) \
+ XO3(i + 3, 3) \
XO4(i,0) \
- XO4(i+1,1) \
- XO4(i+2,2) \
- XO4(i+3,3) \
+ XO4(i + 1, 1) \
+ XO4(i + 2, 2) \
+ XO4(i + 3, 3) \
ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
PF0(0)
PF0(2)
" .align 32 ;\n"
- " 1: ;\n"
+ " 1: ;\n"
BLOCK(0)
BLOCK(4)
BLOCK(8)
BLOCK(12)
- " addl $256, %1 ;\n"
- " addl $256, %2 ;\n"
- " addl $256, %3 ;\n"
- " addl $256, %4 ;\n"
- " addl $256, %5 ;\n"
- " decl %0 ;\n"
- " jnz 1b ;\n"
+ " addl $256, %1 ;\n"
+ " addl $256, %2 ;\n"
+ " addl $256, %3 ;\n"
+ " addl $256, %4 ;\n"
+ " addl $256, %5 ;\n"
+ " decl %0 ;\n"
+ " jnz 1b ;\n"
: "+r" (lines),
"+r" (p1), "+r" (p2), "+r" (p3)
: "r" (p4), "r" (p5)
@@ -843,17 +845,17 @@
/* p4 and p5 were modified, and now the variables are dead.
Clobber them just to be sure nobody does something stupid
like assuming they have some legal value. */
- __asm__ ("" : "=r" (p4), "=r" (p5));
+ asm("" : "=r" (p4), "=r" (p5));
XMMS_RESTORE;
}
static struct xor_block_template xor_block_pIII_sse = {
- .name = "pIII_sse",
- .do_2 = xor_sse_2,
- .do_3 = xor_sse_3,
- .do_4 = xor_sse_4,
- .do_5 = xor_sse_5,
+ .name = "pIII_sse",
+ .do_2 = xor_sse_2,
+ .do_3 = xor_sse_3,
+ .do_4 = xor_sse_4,
+ .do_5 = xor_sse_5,
};
/* Also try the generic routines. */
@@ -861,21 +863,21 @@
#undef XOR_TRY_TEMPLATES
#define XOR_TRY_TEMPLATES \
- do { \
- xor_speed(&xor_block_8regs); \
- xor_speed(&xor_block_8regs_p); \
- xor_speed(&xor_block_32regs); \
- xor_speed(&xor_block_32regs_p); \
- if (cpu_has_xmm) \
- xor_speed(&xor_block_pIII_sse); \
- if (cpu_has_mmx) { \
- xor_speed(&xor_block_pII_mmx); \
- xor_speed(&xor_block_p5_mmx); \
- } \
- } while (0)
+do { \
+ xor_speed(&xor_block_8regs); \
+ xor_speed(&xor_block_8regs_p); \
+ xor_speed(&xor_block_32regs); \
+ xor_speed(&xor_block_32regs_p); \
+ if (cpu_has_xmm) \
+ xor_speed(&xor_block_pIII_sse); \
+ if (cpu_has_mmx) { \
+ xor_speed(&xor_block_pII_mmx); \
+ xor_speed(&xor_block_p5_mmx); \
+ } \
+} while (0)
/* We force the use of the SSE xor block because it can write around L2.
We may also be able to load into the L1 only depending on how the cpu
deals with a load to a line that is being prefetched. */
-#define XOR_SELECT_TEMPLATE(FASTEST) \
+#define XOR_SELECT_TEMPLATE(FASTEST) \
(cpu_has_xmm ? &xor_block_pIII_sse : FASTEST)
diff --git a/include/asm-x86/xor_64.h b/include/asm-x86/xor_64.h
index 1eee7fc..24957e3 100644
--- a/include/asm-x86/xor_64.h
+++ b/include/asm-x86/xor_64.h
@@ -24,20 +24,23 @@
*/
/*
- * x86-64 changes / gcc fixes from Andi Kleen.
+ * x86-64 changes / gcc fixes from Andi Kleen.
* Copyright 2002 Andi Kleen, SuSE Labs.
*
* This hasn't been optimized for the hammer yet, but there are likely
* no advantages to be gotten from x86-64 here anyways.
*/
-typedef struct { unsigned long a,b; } __attribute__((aligned(16))) xmm_store_t;
+typedef struct {
+ unsigned long a, b;
+} __attribute__((aligned(16))) xmm_store_t;
-/* Doesn't use gcc to save the XMM registers, because there is no easy way to
+/* Doesn't use gcc to save the XMM registers, because there is no easy way to
tell it to do a clts before the register saving. */
-#define XMMS_SAVE do { \
+#define XMMS_SAVE \
+do { \
preempt_disable(); \
- asm volatile ( \
+ asm volatile( \
"movq %%cr0,%0 ;\n\t" \
"clts ;\n\t" \
"movups %%xmm0,(%1) ;\n\t" \
@@ -47,10 +50,11 @@
: "=&r" (cr0) \
: "r" (xmm_save) \
: "memory"); \
-} while(0)
+} while (0)
-#define XMMS_RESTORE do { \
- asm volatile ( \
+#define XMMS_RESTORE \
+do { \
+ asm volatile( \
"sfence ;\n\t" \
"movups (%1),%%xmm0 ;\n\t" \
"movups 0x10(%1),%%xmm1 ;\n\t" \
@@ -61,72 +65,72 @@
: "r" (cr0), "r" (xmm_save) \
: "memory"); \
preempt_enable(); \
-} while(0)
+} while (0)
#define OFFS(x) "16*("#x")"
#define PF_OFFS(x) "256+16*("#x")"
#define PF0(x) " prefetchnta "PF_OFFS(x)"(%[p1]) ;\n"
-#define LD(x,y) " movaps "OFFS(x)"(%[p1]), %%xmm"#y" ;\n"
-#define ST(x,y) " movaps %%xmm"#y", "OFFS(x)"(%[p1]) ;\n"
+#define LD(x, y) " movaps "OFFS(x)"(%[p1]), %%xmm"#y" ;\n"
+#define ST(x, y) " movaps %%xmm"#y", "OFFS(x)"(%[p1]) ;\n"
#define PF1(x) " prefetchnta "PF_OFFS(x)"(%[p2]) ;\n"
#define PF2(x) " prefetchnta "PF_OFFS(x)"(%[p3]) ;\n"
#define PF3(x) " prefetchnta "PF_OFFS(x)"(%[p4]) ;\n"
#define PF4(x) " prefetchnta "PF_OFFS(x)"(%[p5]) ;\n"
#define PF5(x) " prefetchnta "PF_OFFS(x)"(%[p6]) ;\n"
-#define XO1(x,y) " xorps "OFFS(x)"(%[p2]), %%xmm"#y" ;\n"
-#define XO2(x,y) " xorps "OFFS(x)"(%[p3]), %%xmm"#y" ;\n"
-#define XO3(x,y) " xorps "OFFS(x)"(%[p4]), %%xmm"#y" ;\n"
-#define XO4(x,y) " xorps "OFFS(x)"(%[p5]), %%xmm"#y" ;\n"
-#define XO5(x,y) " xorps "OFFS(x)"(%[p6]), %%xmm"#y" ;\n"
+#define XO1(x, y) " xorps "OFFS(x)"(%[p2]), %%xmm"#y" ;\n"
+#define XO2(x, y) " xorps "OFFS(x)"(%[p3]), %%xmm"#y" ;\n"
+#define XO3(x, y) " xorps "OFFS(x)"(%[p4]), %%xmm"#y" ;\n"
+#define XO4(x, y) " xorps "OFFS(x)"(%[p5]), %%xmm"#y" ;\n"
+#define XO5(x, y) " xorps "OFFS(x)"(%[p6]), %%xmm"#y" ;\n"
static void
xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
{
- unsigned int lines = bytes >> 8;
+ unsigned int lines = bytes >> 8;
unsigned long cr0;
xmm_store_t xmm_save[4];
XMMS_SAVE;
- asm volatile (
+ asm volatile(
#undef BLOCK
#define BLOCK(i) \
- LD(i,0) \
- LD(i+1,1) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
PF1(i) \
- PF1(i+2) \
- LD(i+2,2) \
- LD(i+3,3) \
- PF0(i+4) \
- PF0(i+6) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
+ PF1(i + 2) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
+ PF0(i + 4) \
+ PF0(i + 6) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
+ ST(i, 0) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
PF0(0)
PF0(2)
" .align 32 ;\n"
- " 1: ;\n"
+ " 1: ;\n"
BLOCK(0)
BLOCK(4)
BLOCK(8)
BLOCK(12)
- " addq %[inc], %[p1] ;\n"
- " addq %[inc], %[p2] ;\n"
+ " addq %[inc], %[p1] ;\n"
+ " addq %[inc], %[p2] ;\n"
" decl %[cnt] ; jnz 1b"
: [p1] "+r" (p1), [p2] "+r" (p2), [cnt] "+r" (lines)
- : [inc] "r" (256UL)
- : "memory");
+ : [inc] "r" (256UL)
+ : "memory");
XMMS_RESTORE;
}
@@ -141,52 +145,52 @@
XMMS_SAVE;
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
#define BLOCK(i) \
PF1(i) \
- PF1(i+2) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
+ PF1(i + 2) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
PF2(i) \
- PF2(i+2) \
- PF0(i+4) \
- PF0(i+6) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
- XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
- ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
+ PF2(i + 2) \
+ PF0(i + 4) \
+ PF0(i + 6) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
+ XO2(i, 0) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
+ ST(i, 0) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
PF0(0)
PF0(2)
" .align 32 ;\n"
- " 1: ;\n"
+ " 1: ;\n"
BLOCK(0)
BLOCK(4)
BLOCK(8)
BLOCK(12)
- " addq %[inc], %[p1] ;\n"
- " addq %[inc], %[p2] ;\n"
- " addq %[inc], %[p3] ;\n"
+ " addq %[inc], %[p1] ;\n"
+ " addq %[inc], %[p2] ;\n"
+ " addq %[inc], %[p3] ;\n"
" decl %[cnt] ; jnz 1b"
: [cnt] "+r" (lines),
[p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3)
: [inc] "r" (256UL)
- : "memory");
+ : "memory");
XMMS_RESTORE;
}
@@ -195,64 +199,64 @@
unsigned long *p3, unsigned long *p4)
{
unsigned int lines = bytes >> 8;
- xmm_store_t xmm_save[4];
+ xmm_store_t xmm_save[4];
unsigned long cr0;
XMMS_SAVE;
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
#define BLOCK(i) \
PF1(i) \
- PF1(i+2) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
+ PF1(i + 2) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
PF2(i) \
- PF2(i+2) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
+ PF2(i + 2) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
PF3(i) \
- PF3(i+2) \
- PF0(i+4) \
- PF0(i+6) \
- XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
- XO3(i,0) \
- XO3(i+1,1) \
- XO3(i+2,2) \
- XO3(i+3,3) \
- ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
+ PF3(i + 2) \
+ PF0(i + 4) \
+ PF0(i + 6) \
+ XO2(i, 0) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
+ XO3(i, 0) \
+ XO3(i + 1, 1) \
+ XO3(i + 2, 2) \
+ XO3(i + 3, 3) \
+ ST(i, 0) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
PF0(0)
PF0(2)
" .align 32 ;\n"
- " 1: ;\n"
+ " 1: ;\n"
BLOCK(0)
BLOCK(4)
BLOCK(8)
BLOCK(12)
- " addq %[inc], %[p1] ;\n"
- " addq %[inc], %[p2] ;\n"
- " addq %[inc], %[p3] ;\n"
- " addq %[inc], %[p4] ;\n"
+ " addq %[inc], %[p1] ;\n"
+ " addq %[inc], %[p2] ;\n"
+ " addq %[inc], %[p3] ;\n"
+ " addq %[inc], %[p4] ;\n"
" decl %[cnt] ; jnz 1b"
: [cnt] "+c" (lines),
[p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4)
: [inc] "r" (256UL)
- : "memory" );
+ : "memory" );
XMMS_RESTORE;
}
@@ -261,70 +265,70 @@
xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
unsigned long *p3, unsigned long *p4, unsigned long *p5)
{
- unsigned int lines = bytes >> 8;
+ unsigned int lines = bytes >> 8;
xmm_store_t xmm_save[4];
unsigned long cr0;
XMMS_SAVE;
- __asm__ __volatile__ (
+ asm volatile(
#undef BLOCK
#define BLOCK(i) \
PF1(i) \
- PF1(i+2) \
- LD(i,0) \
- LD(i+1,1) \
- LD(i+2,2) \
- LD(i+3,3) \
+ PF1(i + 2) \
+ LD(i, 0) \
+ LD(i + 1, 1) \
+ LD(i + 2, 2) \
+ LD(i + 3, 3) \
PF2(i) \
- PF2(i+2) \
- XO1(i,0) \
- XO1(i+1,1) \
- XO1(i+2,2) \
- XO1(i+3,3) \
+ PF2(i + 2) \
+ XO1(i, 0) \
+ XO1(i + 1, 1) \
+ XO1(i + 2, 2) \
+ XO1(i + 3, 3) \
PF3(i) \
- PF3(i+2) \
- XO2(i,0) \
- XO2(i+1,1) \
- XO2(i+2,2) \
- XO2(i+3,3) \
+ PF3(i + 2) \
+ XO2(i, 0) \
+ XO2(i + 1, 1) \
+ XO2(i + 2, 2) \
+ XO2(i + 3, 3) \
PF4(i) \
- PF4(i+2) \
- PF0(i+4) \
- PF0(i+6) \
- XO3(i,0) \
- XO3(i+1,1) \
- XO3(i+2,2) \
- XO3(i+3,3) \
- XO4(i,0) \
- XO4(i+1,1) \
- XO4(i+2,2) \
- XO4(i+3,3) \
- ST(i,0) \
- ST(i+1,1) \
- ST(i+2,2) \
- ST(i+3,3) \
+ PF4(i + 2) \
+ PF0(i + 4) \
+ PF0(i + 6) \
+ XO3(i, 0) \
+ XO3(i + 1, 1) \
+ XO3(i + 2, 2) \
+ XO3(i + 3, 3) \
+ XO4(i, 0) \
+ XO4(i + 1, 1) \
+ XO4(i + 2, 2) \
+ XO4(i + 3, 3) \
+ ST(i, 0) \
+ ST(i + 1, 1) \
+ ST(i + 2, 2) \
+ ST(i + 3, 3) \
PF0(0)
PF0(2)
" .align 32 ;\n"
- " 1: ;\n"
+ " 1: ;\n"
BLOCK(0)
BLOCK(4)
BLOCK(8)
BLOCK(12)
- " addq %[inc], %[p1] ;\n"
- " addq %[inc], %[p2] ;\n"
- " addq %[inc], %[p3] ;\n"
- " addq %[inc], %[p4] ;\n"
- " addq %[inc], %[p5] ;\n"
+ " addq %[inc], %[p1] ;\n"
+ " addq %[inc], %[p2] ;\n"
+ " addq %[inc], %[p3] ;\n"
+ " addq %[inc], %[p4] ;\n"
+ " addq %[inc], %[p5] ;\n"
" decl %[cnt] ; jnz 1b"
: [cnt] "+c" (lines),
- [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4),
+ [p1] "+r" (p1), [p2] "+r" (p2), [p3] "+r" (p3), [p4] "+r" (p4),
[p5] "+r" (p5)
: [inc] "r" (256UL)
: "memory");
@@ -333,18 +337,18 @@
}
static struct xor_block_template xor_block_sse = {
- .name = "generic_sse",
- .do_2 = xor_sse_2,
- .do_3 = xor_sse_3,
- .do_4 = xor_sse_4,
- .do_5 = xor_sse_5,
+ .name = "generic_sse",
+ .do_2 = xor_sse_2,
+ .do_3 = xor_sse_3,
+ .do_4 = xor_sse_4,
+ .do_5 = xor_sse_5,
};
#undef XOR_TRY_TEMPLATES
-#define XOR_TRY_TEMPLATES \
- do { \
- xor_speed(&xor_block_sse); \
- } while (0)
+#define XOR_TRY_TEMPLATES \
+do { \
+ xor_speed(&xor_block_sse); \
+} while (0)
/* We force the use of the SSE xor block because it can write around L2.
We may also be able to load into the L1 only depending on how the cpu
diff --git a/include/asm-xtensa/kvm.h b/include/asm-xtensa/kvm.h
new file mode 100644
index 0000000..bda4e33
--- /dev/null
+++ b/include/asm-xtensa/kvm.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_KVM_XTENSA_H
+#define __LINUX_KVM_XTENSA_H
+
+/* xtensa does not support KVM */
+
+#endif
diff --git a/include/asm-xtensa/semaphore.h b/include/asm-xtensa/semaphore.h
index 3e04167..d9b2034 100644
--- a/include/asm-xtensa/semaphore.h
+++ b/include/asm-xtensa/semaphore.h
@@ -1,99 +1 @@
-/*
- * linux/include/asm-xtensa/semaphore.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- */
-
-#ifndef _XTENSA_SEMAPHORE_H
-#define _XTENSA_SEMAPHORE_H
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <linux/wait.h>
-#include <linux/rwsem.h>
-
-struct semaphore {
- atomic_t count;
- int sleepers;
- wait_queue_head_t wait;
-};
-
-#define __SEMAPHORE_INITIALIZER(name,n) \
-{ \
- .count = ATOMIC_INIT(n), \
- .sleepers = 0, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait) \
-}
-
-#define __DECLARE_SEMAPHORE_GENERIC(name,count) \
- struct semaphore name = __SEMAPHORE_INITIALIZER(name,count)
-
-#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1)
-
-static inline void sema_init (struct semaphore *sem, int val)
-{
- atomic_set(&sem->count, val);
- sem->sleepers = 0;
- init_waitqueue_head(&sem->wait);
-}
-
-static inline void init_MUTEX (struct semaphore *sem)
-{
- sema_init(sem, 1);
-}
-
-static inline void init_MUTEX_LOCKED (struct semaphore *sem)
-{
- sema_init(sem, 0);
-}
-
-asmlinkage void __down(struct semaphore * sem);
-asmlinkage int __down_interruptible(struct semaphore * sem);
-asmlinkage int __down_trylock(struct semaphore * sem);
-asmlinkage void __up(struct semaphore * sem);
-
-extern spinlock_t semaphore_wake_lock;
-
-static inline void down(struct semaphore * sem)
-{
- might_sleep();
-
- if (atomic_sub_return(1, &sem->count) < 0)
- __down(sem);
-}
-
-static inline int down_interruptible(struct semaphore * sem)
-{
- int ret = 0;
-
- might_sleep();
-
- if (atomic_sub_return(1, &sem->count) < 0)
- ret = __down_interruptible(sem);
- return ret;
-}
-
-static inline int down_trylock(struct semaphore * sem)
-{
- int ret = 0;
-
- if (atomic_sub_return(1, &sem->count) < 0)
- ret = __down_trylock(sem);
- return ret;
-}
-
-/*
- * Note! This is subtle. We jump to wake people up only if
- * the semaphore was negative (== somebody was waiting on it).
- */
-static inline void up(struct semaphore * sem)
-{
- if (atomic_add_return(1, &sem->count) <= 0)
- __up(sem);
-}
-
-#endif /* _XTENSA_SEMAPHORE_H */
+#include <linux/semaphore.h>
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 4a446a1..cedbbd8 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -86,6 +86,7 @@
header-y += if_ppp.h
header-y += if_slip.h
header-y += if_strip.h
+header-y += if_tun.h
header-y += if_tunnel.h
header-y += in6.h
header-y += in_route.h
@@ -229,7 +230,6 @@
unifdef-y += if_pppol2tp.h
unifdef-y += if_pppox.h
unifdef-y += if_tr.h
-unifdef-y += if_tun.h
unifdef-y += if_vlan.h
unifdef-y += if_wanpipe.h
unifdef-y += igmp.h
@@ -253,7 +253,7 @@
unifdef-y += kernelcapi.h
unifdef-y += kernel.h
unifdef-y += keyboard.h
-unifdef-$(CONFIG_HAVE_KVM) += kvm.h
+unifdef-y += kvm.h
unifdef-y += llc.h
unifdef-y += loop.h
unifdef-y += lp.h
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 028ba3b..a6a6035 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -256,6 +256,7 @@
void (*bind)(struct cgroup_subsys *ss, struct cgroup *root);
int subsys_id;
int active;
+ int disabled;
int early_init;
#define MAX_CGROUP_TYPE_NAMELEN 32
const char *name;
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 85778a4..3509447 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -216,6 +216,7 @@
/* used to install a new clocksource */
extern int clocksource_register(struct clocksource*);
extern void clocksource_unregister(struct clocksource*);
+extern void clocksource_touch_watchdog(void);
extern struct clocksource* clocksource_get_next(void);
extern void clocksource_change_rating(struct clocksource *cs, int rating);
extern void clocksource_resume(void);
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 34d4406..b4d84ed 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -95,12 +95,17 @@
#define DMA_TX_TYPE_END (DMA_INTERRUPT + 1)
/**
- * enum dma_prep_flags - DMA flags to augment operation preparation
+ * enum dma_ctrl_flags - DMA flags to augment operation preparation,
+ * control completion, and communicate status.
* @DMA_PREP_INTERRUPT - trigger an interrupt (callback) upon completion of
* this transaction
+ * @DMA_CTRL_ACK - the descriptor cannot be reused until the client
+ * acknowledges receipt, i.e. has has a chance to establish any
+ * dependency chains
*/
-enum dma_prep_flags {
+enum dma_ctrl_flags {
DMA_PREP_INTERRUPT = (1 << 0),
+ DMA_CTRL_ACK = (1 << 1),
};
/**
@@ -211,8 +216,8 @@
* ---dma generic offload fields---
* @cookie: tracking cookie for this transaction, set to -EBUSY if
* this tx is sitting on a dependency list
- * @ack: the descriptor can not be reused until the client acknowledges
- * receipt, i.e. has has a chance to establish any dependency chains
+ * @flags: flags to augment operation preparation, control completion, and
+ * communicate status
* @phys: physical address of the descriptor
* @tx_list: driver common field for operations that require multiple
* descriptors
@@ -221,23 +226,20 @@
* @callback: routine to call after this operation is complete
* @callback_param: general parameter to pass to the callback routine
* ---async_tx api specific fields---
- * @depend_list: at completion this list of transactions are submitted
- * @depend_node: allow this transaction to be executed after another
- * transaction has completed, possibly on another channel
+ * @next: at completion submit this descriptor
* @parent: pointer to the next level up in the dependency chain
- * @lock: protect the dependency list
+ * @lock: protect the parent and next pointers
*/
struct dma_async_tx_descriptor {
dma_cookie_t cookie;
- int ack;
+ enum dma_ctrl_flags flags; /* not a 'long' to pack with cookie */
dma_addr_t phys;
struct list_head tx_list;
struct dma_chan *chan;
dma_cookie_t (*tx_submit)(struct dma_async_tx_descriptor *tx);
dma_async_tx_callback callback;
void *callback_param;
- struct list_head depend_list;
- struct list_head depend_node;
+ struct dma_async_tx_descriptor *next;
struct dma_async_tx_descriptor *parent;
spinlock_t lock;
};
@@ -261,7 +263,6 @@
* @device_prep_dma_zero_sum: prepares a zero_sum operation
* @device_prep_dma_memset: prepares a memset operation
* @device_prep_dma_interrupt: prepares an end of chain interrupt operation
- * @device_dependency_added: async_tx notifies the channel about new deps
* @device_issue_pending: push pending transactions to hardware
*/
struct dma_device {
@@ -294,9 +295,8 @@
struct dma_chan *chan, dma_addr_t dest, int value, size_t len,
unsigned long flags);
struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)(
- struct dma_chan *chan);
+ struct dma_chan *chan, unsigned long flags);
- void (*device_dependency_added)(struct dma_chan *chan);
enum dma_status (*device_is_tx_complete)(struct dma_chan *chan,
dma_cookie_t cookie, dma_cookie_t *last,
dma_cookie_t *used);
@@ -321,7 +321,13 @@
static inline void
async_tx_ack(struct dma_async_tx_descriptor *tx)
{
- tx->ack = 1;
+ tx->flags |= DMA_CTRL_ACK;
+}
+
+static inline int
+async_tx_test_ack(struct dma_async_tx_descriptor *tx)
+{
+ return tx->flags & DMA_CTRL_ACK;
}
#define first_dma_cap(mask) __first_dma_cap(&(mask))
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
index e38e759..c37e924 100644
--- a/include/linux/hdreg.h
+++ b/include/linux/hdreg.h
@@ -422,9 +422,11 @@
#define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */
#define HDIO_SET_DMA 0x0326 /* change use-dma flag */
#define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */
+#ifndef __KERNEL__
#define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */
-#define HDIO_SET_NICE 0x0329 /* set nice flags */
#define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */
+#endif
+#define HDIO_SET_NICE 0x0329 /* set nice flags */
#define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */
#define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */
#define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */
diff --git a/include/linux/hpet.h b/include/linux/hpet.h
index 9cd94bf..2dc29ce 100644
--- a/include/linux/hpet.h
+++ b/include/linux/hpet.h
@@ -64,7 +64,7 @@
*/
#define Tn_INT_ROUTE_CAP_MASK (0xffffffff00000000ULL)
-#define Tn_INT_ROUTE_CAP_SHIFT (32UL)
+#define Tn_INI_ROUTE_CAP_SHIFT (32UL)
#define Tn_FSB_INT_DELCAP_MASK (0x8000UL)
#define Tn_FSB_INT_DELCAP_SHIFT (15)
#define Tn_FSB_EN_CNF_MASK (0x4000UL)
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index 1ad56a7..56f3236 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -173,7 +173,6 @@
* struct hrtimer_cpu_base - the per cpu clock bases
* @lock: lock protecting the base and associated clock bases
* and timers
- * @lock_key: the lock_class_key for use with lockdep
* @clock_base: array of clock bases for this cpu
* @curr_timer: the timer which is executing a callback right now
* @expires_next: absolute time of the next event which was scheduled
@@ -189,7 +188,6 @@
*/
struct hrtimer_cpu_base {
spinlock_t lock;
- struct lock_class_key lock_key;
struct hrtimer_clock_base clock_base[HRTIMER_MAX_CLOCK_BASES];
struct list_head cb_pending;
#ifdef CONFIG_HIGH_RES_TIMERS
diff --git a/include/linux/ide.h b/include/linux/ide.h
index bc26b2f..6c39482 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -82,24 +82,10 @@
#define IDE_FEATURE_OFFSET IDE_ERROR_OFFSET
#define IDE_COMMAND_OFFSET IDE_STATUS_OFFSET
-
-#define IDE_DATA_REG (HWIF(drive)->io_ports[IDE_DATA_OFFSET])
-#define IDE_ERROR_REG (HWIF(drive)->io_ports[IDE_ERROR_OFFSET])
-#define IDE_NSECTOR_REG (HWIF(drive)->io_ports[IDE_NSECTOR_OFFSET])
-#define IDE_SECTOR_REG (HWIF(drive)->io_ports[IDE_SECTOR_OFFSET])
-#define IDE_LCYL_REG (HWIF(drive)->io_ports[IDE_LCYL_OFFSET])
-#define IDE_HCYL_REG (HWIF(drive)->io_ports[IDE_HCYL_OFFSET])
-#define IDE_SELECT_REG (HWIF(drive)->io_ports[IDE_SELECT_OFFSET])
-#define IDE_STATUS_REG (HWIF(drive)->io_ports[IDE_STATUS_OFFSET])
-#define IDE_CONTROL_REG (HWIF(drive)->io_ports[IDE_CONTROL_OFFSET])
-#define IDE_IRQ_REG (HWIF(drive)->io_ports[IDE_IRQ_OFFSET])
-
-#define IDE_FEATURE_REG IDE_ERROR_REG
-#define IDE_COMMAND_REG IDE_STATUS_REG
-#define IDE_ALTSTATUS_REG IDE_CONTROL_REG
-#define IDE_IREASON_REG IDE_NSECTOR_REG
-#define IDE_BCOUNTL_REG IDE_LCYL_REG
-#define IDE_BCOUNTH_REG IDE_HCYL_REG
+#define IDE_ALTSTATUS_OFFSET IDE_CONTROL_OFFSET
+#define IDE_IREASON_OFFSET IDE_NSECTOR_OFFSET
+#define IDE_BCOUNTL_OFFSET IDE_LCYL_OFFSET
+#define IDE_BCOUNTH_OFFSET IDE_HCYL_OFFSET
#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
#define BAD_R_STAT (BUSY_STAT | ERR_STAT)
@@ -169,7 +155,7 @@
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
- ide_au1xxx, ide_palm3710, ide_forced
+ ide_au1xxx, ide_palm3710
};
typedef u8 hwif_chipset_t;
@@ -186,14 +172,9 @@
} hw_regs_t;
struct hwif_s * ide_find_port(unsigned long);
-struct hwif_s *ide_deprecated_find_port(unsigned long);
void ide_init_port_data(struct hwif_s *, unsigned int);
void ide_init_port_hw(struct hwif_s *, hw_regs_t *);
-struct ide_drive_s;
-int ide_register_hw(hw_regs_t *, void (*)(struct ide_drive_s *),
- struct hwif_s **);
-
static inline void ide_std_init_ports(hw_regs_t *hw,
unsigned long io_addr,
unsigned long ctl_addr)
@@ -213,45 +194,6 @@
#define MAX_HWIFS CONFIG_IDE_MAX_HWIFS
#endif
-/* needed on alpha, x86/x86_64, ia64, mips, ppc32 and sh */
-#ifndef IDE_ARCH_OBSOLETE_DEFAULTS
-# define ide_default_io_base(index) (0)
-# define ide_default_irq(base) (0)
-# define ide_init_default_irq(base) (0)
-#endif
-
-#ifdef CONFIG_IDE_ARCH_OBSOLETE_INIT
-static inline void ide_init_hwif_ports(hw_regs_t *hw,
- unsigned long io_addr,
- unsigned long ctl_addr,
- int *irq)
-{
- if (!ctl_addr)
- ide_std_init_ports(hw, io_addr, ide_default_io_ctl(io_addr));
- else
- ide_std_init_ports(hw, io_addr, ctl_addr);
-
- if (irq)
- *irq = 0;
-
- hw->io_ports[IDE_IRQ_OFFSET] = 0;
-
-#ifdef CONFIG_PPC32
- if (ppc_ide_md.ide_init_hwif)
- ppc_ide_md.ide_init_hwif(hw, io_addr, ctl_addr, irq);
-#endif
-}
-#else
-static inline void ide_init_hwif_ports(hw_regs_t *hw,
- unsigned long io_addr,
- unsigned long ctl_addr,
- int *irq)
-{
- if (io_addr || ctl_addr)
- printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__);
-}
-#endif /* CONFIG_IDE_ARCH_OBSOLETE_INIT */
-
/* Currently only m68k, apus and m8xx need it */
#ifndef IDE_ARCH_ACK_INTR
# define ide_ack_intr(hwif) (1)
@@ -406,7 +348,7 @@
u8 wcache; /* status of write cache */
u8 acoustic; /* acoustic management */
u8 media; /* disk, cdrom, tape, floppy, ... */
- u8 ctl; /* "normal" value for IDE_CONTROL_REG */
+ u8 ctl; /* "normal" value for Control register */
u8 ready_stat; /* min status value for drive ready */
u8 mult_count; /* current multiple sector setting */
u8 mult_req; /* requested multiple sector setting */
@@ -507,8 +449,6 @@
void (*maskproc)(ide_drive_t *, int);
/* check host's drive quirk list */
void (*quirkproc)(ide_drive_t *);
- /* driver soft-power interface */
- int (*busproc)(ide_drive_t *, int);
#endif
u8 (*mdma_filter)(ide_drive_t *);
u8 (*udma_filter)(ide_drive_t *);
@@ -578,7 +518,6 @@
unsigned noprobe : 1; /* don't probe for this interface */
unsigned present : 1; /* this interface exists */
- unsigned hold : 1; /* this interface is always present */
unsigned serialized : 1; /* serialized all channel operation */
unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
unsigned reset : 1; /* reset after probe */
@@ -586,7 +525,9 @@
unsigned mmio : 1; /* host uses MMIO */
unsigned straight8 : 1; /* Alan's straight 8 check */
- struct device gendev;
+ struct device gendev;
+ struct device *portdev;
+
struct completion gendev_rel_comp; /* To deal with device release() */
void *hwif_data; /* extra hwif data */
@@ -647,6 +588,68 @@
int set_pio_mode(ide_drive_t *, int);
int set_using_dma(ide_drive_t *, int);
+/* ATAPI packet command flags */
+enum {
+ /* set when an error is considered normal - no retry (ide-tape) */
+ PC_FLAG_ABORT = (1 << 0),
+ PC_FLAG_SUPPRESS_ERROR = (1 << 1),
+ PC_FLAG_WAIT_FOR_DSC = (1 << 2),
+ PC_FLAG_DMA_OK = (1 << 3),
+ PC_FLAG_DMA_RECOMMENDED = (1 << 4),
+ PC_FLAG_DMA_IN_PROGRESS = (1 << 5),
+ PC_FLAG_DMA_ERROR = (1 << 6),
+ PC_FLAG_WRITING = (1 << 7),
+ /* command timed out */
+ PC_FLAG_TIMEDOUT = (1 << 8),
+};
+
+struct ide_atapi_pc {
+ /* actual packet bytes */
+ u8 c[12];
+ /* incremented on each retry */
+ int retries;
+ int error;
+
+ /* bytes to transfer */
+ int req_xfer;
+ /* bytes actually transferred */
+ int xferred;
+
+ /* data buffer */
+ u8 *buf;
+ /* current buffer position */
+ u8 *cur_pos;
+ int buf_size;
+ /* missing/available data on the current buffer */
+ int b_count;
+
+ /* the corresponding request */
+ struct request *rq;
+
+ unsigned long flags;
+
+ /*
+ * those are more or less driver-specific and some of them are subject
+ * to change/removal later.
+ */
+ u8 pc_buf[256];
+ void (*idefloppy_callback) (ide_drive_t *);
+ ide_startstop_t (*idetape_callback) (ide_drive_t *);
+
+ /* idetape only */
+ struct idetape_bh *bh;
+ char *b_data;
+
+ /* idescsi only for now */
+ struct scatterlist *sg;
+ unsigned int sg_cnt;
+
+ struct scsi_cmnd *scsi_cmd;
+ void (*done) (struct scsi_cmnd *);
+
+ unsigned long timeout;
+};
+
#ifdef CONFIG_IDE_PROC_FS
/*
* configurable drive settings
@@ -691,6 +694,7 @@
void proc_ide_destroy(void);
void ide_proc_register_port(ide_hwif_t *);
void ide_proc_port_register_devices(ide_hwif_t *);
+void ide_proc_unregister_device(ide_drive_t *);
void ide_proc_unregister_port(ide_hwif_t *);
void ide_proc_register_driver(ide_drive_t *, ide_driver_t *);
void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *);
@@ -724,6 +728,7 @@
static inline void proc_ide_destroy(void) { ; }
static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; }
@@ -990,7 +995,6 @@
void ide_init_disk(struct gendisk *, ide_drive_t *);
#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
-extern int ide_scan_direction;
extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
#else
@@ -1195,7 +1199,7 @@
void ide_remove_port_from_hwgroup(ide_hwif_t *);
extern int ide_hwif_request_regions(ide_hwif_t *hwif);
extern void ide_hwif_release_regions(ide_hwif_t* hwif);
-void ide_unregister(unsigned int, int, int);
+void ide_unregister(unsigned int);
void ide_register_region(struct gendisk *);
void ide_unregister_region(struct gendisk *);
@@ -1204,6 +1208,8 @@
int ide_device_add_all(u8 *idx, const struct ide_port_info *);
int ide_device_add(u8 idx[4], const struct ide_port_info *);
+void ide_port_unregister_devices(ide_hwif_t *);
+void ide_port_scan(ide_hwif_t *);
static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
{
@@ -1279,6 +1285,7 @@
#define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable_in_hardirq(); } while (0)
extern struct bus_type ide_bus_type;
+extern struct class *ide_port_class;
/* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
#define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
@@ -1307,7 +1314,10 @@
static inline void ide_set_irq(ide_drive_t *drive, int on)
{
- drive->hwif->OUTB(drive->ctl | (on ? 0 : 2), IDE_CONTROL_REG);
+ ide_hwif_t *hwif = drive->hwif;
+
+ hwif->OUTB(drive->ctl | (on ? 0 : 2),
+ hwif->io_ports[IDE_CONTROL_OFFSET]);
}
static inline u8 ide_read_status(ide_drive_t *drive)
@@ -1331,4 +1341,26 @@
return hwif->INB(hwif->io_ports[IDE_ERROR_OFFSET]);
}
+/*
+ * Too bad. The drive wants to send us data which we are not ready to accept.
+ * Just throw it away.
+ */
+static inline void ide_atapi_discard_data(ide_drive_t *drive, unsigned bcount)
+{
+ ide_hwif_t *hwif = drive->hwif;
+
+ /* FIXME: use ->atapi_input_bytes */
+ while (bcount--)
+ (void)hwif->INB(hwif->io_ports[IDE_DATA_OFFSET]);
+}
+
+static inline void ide_atapi_write_zeros(ide_drive_t *drive, unsigned bcount)
+{
+ ide_hwif_t *hwif = drive->hwif;
+
+ /* FIXME: use ->atapi_output_bytes */
+ while (bcount--)
+ hwif->OUTB(0, hwif->io_ports[IDE_DATA_OFFSET]);
+}
+
#endif /* _IDE_H */
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 72f1c5f..8c71fe2 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -18,47 +18,8 @@
#ifndef __IF_TUN_H
#define __IF_TUN_H
-/* Uncomment to enable debugging */
-/* #define TUN_DEBUG 1 */
-
#include <linux/types.h>
-#ifdef __KERNEL__
-
-#ifdef TUN_DEBUG
-#define DBG if(tun->debug)printk
-#define DBG1 if(debug==2)printk
-#else
-#define DBG( a... )
-#define DBG1( a... )
-#endif
-
-struct tun_struct {
- struct list_head list;
- unsigned long flags;
- int attached;
- uid_t owner;
- gid_t group;
-
- wait_queue_head_t read_wait;
- struct sk_buff_head readq;
-
- struct net_device *dev;
-
- struct fasync_struct *fasync;
-
- unsigned long if_flags;
- u8 dev_addr[ETH_ALEN];
- u32 chr_filter[2];
- u32 net_filter[2];
-
-#ifdef TUN_DEBUG
- int debug;
-#endif
-};
-
-#endif /* __KERNEL__ */
-
/* Read queue size */
#define TUN_READQ_SIZE 500
diff --git a/include/linux/input.h b/include/linux/input.h
index 1bdc39a..cae2c35 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -1227,12 +1227,13 @@
static inline struct input_dev *input_get_device(struct input_dev *dev)
{
- return to_input_dev(get_device(&dev->dev));
+ return dev ? to_input_dev(get_device(&dev->dev)) : NULL;
}
static inline void input_put_device(struct input_dev *dev)
{
- put_device(&dev->dev);
+ if (dev)
+ put_device(&dev->dev);
}
static inline void *input_get_drvdata(struct input_dev *dev)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index f8ab4ce..b5fef13 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -102,6 +102,25 @@
extern void disable_irq(unsigned int irq);
extern void enable_irq(unsigned int irq);
+#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+
+extern int irq_set_affinity(unsigned int irq, cpumask_t cpumask);
+extern int irq_can_set_affinity(unsigned int irq);
+
+#else /* CONFIG_SMP */
+
+static inline int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
+{
+ return -EINVAL;
+}
+
+static inline int irq_can_set_affinity(unsigned int irq)
+{
+ return 0;
+}
+
+#endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
+
#ifdef CONFIG_GENERIC_HARDIRQS
/*
* Special lockdep variants of irq disabling/enabling.
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 1b4ccf2..2b7a118 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -2,6 +2,7 @@
#define IOCONTEXT_H
#include <linux/radix-tree.h>
+#include <linux/rcupdate.h>
/*
* This is the per-process anticipatory I/O scheduler state.
@@ -54,6 +55,8 @@
void (*dtor)(struct io_context *); /* destructor */
void (*exit)(struct io_context *); /* called on task exit */
+
+ struct rcu_head rcu_head;
};
/*
@@ -88,8 +91,10 @@
* if ref count is zero, don't allow sharing (ioc is going away, it's
* a race).
*/
- if (ioc && atomic_inc_not_zero(&ioc->refcount))
+ if (ioc && atomic_inc_not_zero(&ioc->refcount)) {
+ atomic_inc(&ioc->nr_tasks);
return ioc;
+ }
return NULL;
}
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 4aaefc3..134c8e5 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -53,7 +53,7 @@
/*
* TLV encoded option data follows.
*/
-};
+} __attribute__ ((packed)); /* required for some archs */
#define ipv6_destopt_hdr ipv6_opt_hdr
#define ipv6_hopopt_hdr ipv6_opt_hdr
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 176e5e7..1883a85 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -228,21 +228,11 @@
#endif /* CONFIG_GENERIC_PENDING_IRQ */
-extern int irq_set_affinity(unsigned int irq, cpumask_t cpumask);
-extern int irq_can_set_affinity(unsigned int irq);
-
#else /* CONFIG_SMP */
#define move_native_irq(x)
#define move_masked_irq(x)
-static inline int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
-{
- return -EINVAL;
-}
-
-static inline int irq_can_set_affinity(unsigned int irq) { return 0; }
-
#endif /* CONFIG_SMP */
#ifdef CONFIG_IRQBALANCE
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
new file mode 100644
index 0000000..9757b1a6
--- /dev/null
+++ b/include/linux/kgdb.h
@@ -0,0 +1,281 @@
+/*
+ * This provides the callbacks and functions that KGDB needs to share between
+ * the core, I/O and arch-specific portions.
+ *
+ * Author: Amit Kale <amitkale@linsyssoft.com> and
+ * Tom Rini <trini@kernel.crashing.org>
+ *
+ * 2001-2004 (c) Amit S. Kale and 2003-2005 (c) MontaVista Software, Inc.
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _KGDB_H_
+#define _KGDB_H_
+
+#include <linux/serial_8250.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/atomic.h>
+#include <asm/kgdb.h>
+
+struct pt_regs;
+
+/**
+ * kgdb_skipexception - (optional) exit kgdb_handle_exception early
+ * @exception: Exception vector number
+ * @regs: Current &struct pt_regs.
+ *
+ * On some architectures it is required to skip a breakpoint
+ * exception when it occurs after a breakpoint has been removed.
+ * This can be implemented in the architecture specific portion of
+ * for kgdb.
+ */
+extern int kgdb_skipexception(int exception, struct pt_regs *regs);
+
+/**
+ * kgdb_post_primary_code - (optional) Save error vector/code numbers.
+ * @regs: Original pt_regs.
+ * @e_vector: Original error vector.
+ * @err_code: Original error code.
+ *
+ * This is usually needed on architectures which support SMP and
+ * KGDB. This function is called after all the secondary cpus have
+ * been put to a know spin state and the primary CPU has control over
+ * KGDB.
+ */
+extern void kgdb_post_primary_code(struct pt_regs *regs, int e_vector,
+ int err_code);
+
+/**
+ * kgdb_disable_hw_debug - (optional) Disable hardware debugging hook
+ * @regs: Current &struct pt_regs.
+ *
+ * This function will be called if the particular architecture must
+ * disable hardware debugging while it is processing gdb packets or
+ * handling exception.
+ */
+extern void kgdb_disable_hw_debug(struct pt_regs *regs);
+
+struct tasklet_struct;
+struct task_struct;
+struct uart_port;
+
+/**
+ * kgdb_breakpoint - compiled in breakpoint
+ *
+ * This will be impelmented a static inline per architecture. This
+ * function is called by the kgdb core to execute an architecture
+ * specific trap to cause kgdb to enter the exception processing.
+ *
+ */
+void kgdb_breakpoint(void);
+
+extern int kgdb_connected;
+
+extern atomic_t kgdb_setting_breakpoint;
+extern atomic_t kgdb_cpu_doing_single_step;
+
+extern struct task_struct *kgdb_usethread;
+extern struct task_struct *kgdb_contthread;
+
+enum kgdb_bptype {
+ BP_BREAKPOINT = 0,
+ BP_HARDWARE_BREAKPOINT,
+ BP_WRITE_WATCHPOINT,
+ BP_READ_WATCHPOINT,
+ BP_ACCESS_WATCHPOINT
+};
+
+enum kgdb_bpstate {
+ BP_UNDEFINED = 0,
+ BP_REMOVED,
+ BP_SET,
+ BP_ACTIVE
+};
+
+struct kgdb_bkpt {
+ unsigned long bpt_addr;
+ unsigned char saved_instr[BREAK_INSTR_SIZE];
+ enum kgdb_bptype type;
+ enum kgdb_bpstate state;
+};
+
+#ifndef KGDB_MAX_BREAKPOINTS
+# define KGDB_MAX_BREAKPOINTS 1000
+#endif
+
+#define KGDB_HW_BREAKPOINT 1
+
+/*
+ * Functions each KGDB-supporting architecture must provide:
+ */
+
+/**
+ * kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ * This function will handle the initalization of any architecture
+ * specific callbacks.
+ */
+extern int kgdb_arch_init(void);
+
+/**
+ * kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ * This function will handle the uninitalization of any architecture
+ * specific callbacks, for dynamic registration and unregistration.
+ */
+extern void kgdb_arch_exit(void);
+
+/**
+ * pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs
+ * @gdb_regs: A pointer to hold the registers in the order GDB wants.
+ * @regs: The &struct pt_regs of the current process.
+ *
+ * Convert the pt_regs in @regs into the format for registers that
+ * GDB expects, stored in @gdb_regs.
+ */
+extern void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs);
+
+/**
+ * sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs
+ * @gdb_regs: A pointer to hold the registers in the order GDB wants.
+ * @p: The &struct task_struct of the desired process.
+ *
+ * Convert the register values of the sleeping process in @p to
+ * the format that GDB expects.
+ * This function is called when kgdb does not have access to the
+ * &struct pt_regs and therefore it should fill the gdb registers
+ * @gdb_regs with what has been saved in &struct thread_struct
+ * thread field during switch_to.
+ */
+extern void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p);
+
+/**
+ * gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs.
+ * @gdb_regs: A pointer to hold the registers we've received from GDB.
+ * @regs: A pointer to a &struct pt_regs to hold these values in.
+ *
+ * Convert the GDB regs in @gdb_regs into the pt_regs, and store them
+ * in @regs.
+ */
+extern void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs);
+
+/**
+ * kgdb_arch_handle_exception - Handle architecture specific GDB packets.
+ * @vector: The error vector of the exception that happened.
+ * @signo: The signal number of the exception that happened.
+ * @err_code: The error code of the exception that happened.
+ * @remcom_in_buffer: The buffer of the packet we have read.
+ * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
+ * @regs: The &struct pt_regs of the current process.
+ *
+ * This function MUST handle the 'c' and 's' command packets,
+ * as well packets to set / remove a hardware breakpoint, if used.
+ * If there are additional packets which the hardware needs to handle,
+ * they are handled here. The code should return -1 if it wants to
+ * process more packets, and a %0 or %1 if it wants to exit from the
+ * kgdb callback.
+ */
+extern int
+kgdb_arch_handle_exception(int vector, int signo, int err_code,
+ char *remcom_in_buffer,
+ char *remcom_out_buffer,
+ struct pt_regs *regs);
+
+/**
+ * kgdb_roundup_cpus - Get other CPUs into a holding pattern
+ * @flags: Current IRQ state
+ *
+ * On SMP systems, we need to get the attention of the other CPUs
+ * and get them be in a known state. This should do what is needed
+ * to get the other CPUs to call kgdb_wait(). Note that on some arches,
+ * the NMI approach is not used for rounding up all the CPUs. For example,
+ * in case of MIPS, smp_call_function() is used to roundup CPUs. In
+ * this case, we have to make sure that interrupts are enabled before
+ * calling smp_call_function(). The argument to this function is
+ * the flags that will be used when restoring the interrupts. There is
+ * local_irq_save() call before kgdb_roundup_cpus().
+ *
+ * On non-SMP systems, this is not called.
+ */
+extern void kgdb_roundup_cpus(unsigned long flags);
+
+/* Optional functions. */
+extern int kgdb_validate_break_address(unsigned long addr);
+extern int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr);
+extern int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle);
+
+/**
+ * struct kgdb_arch - Describe architecture specific values.
+ * @gdb_bpt_instr: The instruction to trigger a breakpoint.
+ * @flags: Flags for the breakpoint, currently just %KGDB_HW_BREAKPOINT.
+ * @set_breakpoint: Allow an architecture to specify how to set a software
+ * breakpoint.
+ * @remove_breakpoint: Allow an architecture to specify how to remove a
+ * software breakpoint.
+ * @set_hw_breakpoint: Allow an architecture to specify how to set a hardware
+ * breakpoint.
+ * @remove_hw_breakpoint: Allow an architecture to specify how to remove a
+ * hardware breakpoint.
+ * @remove_all_hw_break: Allow an architecture to specify how to remove all
+ * hardware breakpoints.
+ * @correct_hw_break: Allow an architecture to specify how to correct the
+ * hardware debug registers.
+ */
+struct kgdb_arch {
+ unsigned char gdb_bpt_instr[BREAK_INSTR_SIZE];
+ unsigned long flags;
+
+ int (*set_breakpoint)(unsigned long, char *);
+ int (*remove_breakpoint)(unsigned long, char *);
+ int (*set_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
+ int (*remove_hw_breakpoint)(unsigned long, int, enum kgdb_bptype);
+ void (*remove_all_hw_break)(void);
+ void (*correct_hw_break)(void);
+};
+
+/**
+ * struct kgdb_io - Describe the interface for an I/O driver to talk with KGDB.
+ * @name: Name of the I/O driver.
+ * @read_char: Pointer to a function that will return one char.
+ * @write_char: Pointer to a function that will write one char.
+ * @flush: Pointer to a function that will flush any pending writes.
+ * @init: Pointer to a function that will initialize the device.
+ * @pre_exception: Pointer to a function that will do any prep work for
+ * the I/O driver.
+ * @post_exception: Pointer to a function that will do any cleanup work
+ * for the I/O driver.
+ */
+struct kgdb_io {
+ const char *name;
+ int (*read_char) (void);
+ void (*write_char) (u8);
+ void (*flush) (void);
+ int (*init) (void);
+ void (*pre_exception) (void);
+ void (*post_exception) (void);
+};
+
+extern struct kgdb_arch arch_kgdb_ops;
+
+extern int kgdb_register_io_module(struct kgdb_io *local_kgdb_io_ops);
+extern void kgdb_unregister_io_module(struct kgdb_io *local_kgdb_io_ops);
+
+extern int kgdb_hex2long(char **ptr, long *long_val);
+extern int kgdb_mem2hex(char *mem, char *buf, int count);
+extern int kgdb_hex2mem(char *buf, char *mem, int count);
+
+extern int kgdb_isremovedbreak(unsigned long addr);
+
+extern int
+kgdb_handle_exception(int ex_vector, int signo, int err_code,
+ struct pt_regs *regs);
+extern int kgdb_nmicallback(int cpu, void *regs);
+
+extern int kgdb_single_step;
+extern atomic_t kgdb_active;
+
+#endif /* _KGDB_H_ */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b064bfe..165734a 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -122,6 +122,8 @@
ATAPI_MAX_DRAIN = 16 << 10,
+ ATA_ALL_DEVICES = (1 << ATA_MAX_DEVICES) - 1,
+
ATA_SHT_EMULATED = 1,
ATA_SHT_CMD_PER_LUN = 1,
ATA_SHT_THIS_ID = -1,
@@ -163,9 +165,6 @@
ATA_DEV_NONE = 9, /* no device */
/* struct ata_link flags */
- ATA_LFLAG_HRST_TO_RESUME = (1 << 0), /* hardreset to resume link */
- ATA_LFLAG_SKIP_D2H_BSY = (1 << 1), /* can't wait for the first D2H
- * Register FIS clearing BSY */
ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */
ATA_LFLAG_ASSUME_ATA = (1 << 3), /* assume ATA class */
ATA_LFLAG_ASSUME_SEMB = (1 << 4), /* assume SEMB class */
@@ -225,6 +224,7 @@
ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */
ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */
ATA_QCFLAG_QUIET = (1 << 6), /* don't report device error */
+ ATA_QCFLAG_RETRY = (1 << 7), /* retry after failure */
ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */
ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */
@@ -249,6 +249,25 @@
*/
ATA_TMOUT_FF_WAIT = 4 * HZ / 5,
+ /* Spec mandates to wait for ">= 2ms" before checking status
+ * after reset. We wait 150ms, because that was the magic
+ * delay used for ATAPI devices in Hale Landis's ATADRVR, for
+ * the period of time between when the ATA command register is
+ * written, and then status is checked. Because waiting for
+ * "a while" before checking status is fine, post SRST, we
+ * perform this magic delay here as well.
+ *
+ * Old drivers/ide uses the 2mS rule and then waits for ready.
+ */
+ ATA_WAIT_AFTER_RESET_MSECS = 150,
+
+ /* If PMP is supported, we have to do follow-up SRST. As some
+ * PMPs don't send D2H Reg FIS after hardreset, LLDs are
+ * advised to wait only for the following duration before
+ * doing SRST.
+ */
+ ATA_TMOUT_PMP_SRST_WAIT = 1 * HZ,
+
/* ATA bus states */
BUS_UNKNOWN = 0,
BUS_DMA = 1,
@@ -292,17 +311,16 @@
/* reset / recovery action types */
ATA_EH_REVALIDATE = (1 << 0),
- ATA_EH_SOFTRESET = (1 << 1),
- ATA_EH_HARDRESET = (1 << 2),
+ ATA_EH_SOFTRESET = (1 << 1), /* meaningful only in ->prereset */
+ ATA_EH_HARDRESET = (1 << 2), /* meaningful only in ->prereset */
+ ATA_EH_RESET = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
ATA_EH_ENABLE_LINK = (1 << 3),
ATA_EH_LPM = (1 << 4), /* link power management action */
- ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
/* ata_eh_info->flags */
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
- ATA_EHI_RESUME_LINK = (1 << 1), /* resume link (reset modifier) */
ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */
ATA_EHI_QUIET = (1 << 3), /* be quiet */
@@ -313,7 +331,6 @@
ATA_EHI_POST_SETMODE = (1 << 20), /* revaildating after setmode */
ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,
- ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK,
/* max tries if error condition is still set after ->error_handler */
ATA_EH_MAX_TRIES = 5,
@@ -350,7 +367,24 @@
ATAPI_READ = 0, /* READs */
ATAPI_WRITE = 1, /* WRITEs */
ATAPI_READ_CD = 2, /* READ CD [MSF] */
- ATAPI_MISC = 3, /* the rest */
+ ATAPI_PASS_THRU = 3, /* SAT pass-thru */
+ ATAPI_MISC = 4, /* the rest */
+
+ /* Timing constants */
+ ATA_TIMING_SETUP = (1 << 0),
+ ATA_TIMING_ACT8B = (1 << 1),
+ ATA_TIMING_REC8B = (1 << 2),
+ ATA_TIMING_CYC8B = (1 << 3),
+ ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B |
+ ATA_TIMING_CYC8B,
+ ATA_TIMING_ACTIVE = (1 << 4),
+ ATA_TIMING_RECOVER = (1 << 5),
+ ATA_TIMING_CYCLE = (1 << 6),
+ ATA_TIMING_UDMA = (1 << 7),
+ ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
+ ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
+ ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
+ ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
};
enum ata_xfer_mask {
@@ -411,6 +445,7 @@
};
extern struct class_device_attribute class_device_attr_link_power_management_policy;
+#ifdef CONFIG_ATA_SFF
struct ata_ioports {
void __iomem *cmd_addr;
void __iomem *data_addr;
@@ -428,6 +463,7 @@
void __iomem *bmdma_addr;
void __iomem *scr_addr;
};
+#endif /* CONFIG_ATA_SFF */
struct ata_host {
spinlock_t lock;
@@ -435,7 +471,7 @@
void __iomem * const *iomap;
unsigned int n_ports;
void *private_data;
- const struct ata_port_operations *ops;
+ struct ata_port_operations *ops;
unsigned long flags;
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
@@ -604,7 +640,7 @@
struct ata_port {
struct Scsi_Host *scsi_host; /* our co-allocated scsi host */
- const struct ata_port_operations *ops;
+ struct ata_port_operations *ops;
spinlock_t *lock;
unsigned long flags; /* ATA_FLAG_xxx */
unsigned int pflags; /* ATA_PFLAG_xxx */
@@ -614,7 +650,9 @@
struct ata_prd *prd; /* our SG list */
dma_addr_t prd_dma; /* and its DMA mapping */
+#ifdef CONFIG_ATA_SFF
struct ata_ioports ioaddr; /* ATA cmd/ctl/dma register blocks */
+#endif /* CONFIG_ATA_SFF */
u8 ctl; /* cache of ATA control register */
u8 last_ctl; /* Cache last written value */
@@ -666,81 +704,108 @@
u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
};
+/* The following initializer overrides a method to NULL whether one of
+ * its parent has the method defined or not. This is equivalent to
+ * ERR_PTR(-ENOENT). Unfortunately, ERR_PTR doesn't render a constant
+ * expression and thus can't be used as an initializer.
+ */
+#define ATA_OP_NULL (void *)(unsigned long)(-ENOENT)
+
struct ata_port_operations {
- void (*dev_config) (struct ata_device *);
-
- void (*set_piomode) (struct ata_port *, struct ata_device *);
- void (*set_dmamode) (struct ata_port *, struct ata_device *);
- unsigned long (*mode_filter) (struct ata_device *, unsigned long);
-
- void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf);
- void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
-
- void (*exec_command)(struct ata_port *ap, const struct ata_taskfile *tf);
- u8 (*check_status)(struct ata_port *ap);
- u8 (*check_altstatus)(struct ata_port *ap);
- void (*dev_select)(struct ata_port *ap, unsigned int device);
-
- void (*phy_reset) (struct ata_port *ap); /* obsolete */
- int (*set_mode) (struct ata_link *link, struct ata_device **r_failed_dev);
-
- int (*cable_detect) (struct ata_port *ap);
-
- int (*check_atapi_dma) (struct ata_queued_cmd *qc);
-
- void (*bmdma_setup) (struct ata_queued_cmd *qc);
- void (*bmdma_start) (struct ata_queued_cmd *qc);
-
- unsigned int (*data_xfer) (struct ata_device *dev, unsigned char *buf,
- unsigned int buflen, int rw);
-
- int (*qc_defer) (struct ata_queued_cmd *qc);
- void (*qc_prep) (struct ata_queued_cmd *qc);
- unsigned int (*qc_issue) (struct ata_queued_cmd *qc);
-
- /* port multiplier */
- void (*pmp_attach) (struct ata_port *ap);
- void (*pmp_detach) (struct ata_port *ap);
-
- /* Error handlers. ->error_handler overrides ->eng_timeout and
- * indicates that new-style EH is in place.
+ /*
+ * Command execution
*/
- void (*eng_timeout) (struct ata_port *ap); /* obsolete */
+ int (*qc_defer)(struct ata_queued_cmd *qc);
+ int (*check_atapi_dma)(struct ata_queued_cmd *qc);
+ void (*qc_prep)(struct ata_queued_cmd *qc);
+ unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
+ bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
- void (*freeze) (struct ata_port *ap);
- void (*thaw) (struct ata_port *ap);
- void (*error_handler) (struct ata_port *ap);
- void (*post_internal_cmd) (struct ata_queued_cmd *qc);
+ /*
+ * Configuration and exception handling
+ */
+ int (*cable_detect)(struct ata_port *ap);
+ unsigned long (*mode_filter)(struct ata_device *dev, unsigned long xfer_mask);
+ void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
+ void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
+ int (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
- irq_handler_t irq_handler;
- void (*irq_clear) (struct ata_port *);
- u8 (*irq_on) (struct ata_port *);
+ void (*dev_config)(struct ata_device *dev);
- int (*scr_read) (struct ata_port *ap, unsigned int sc_reg, u32 *val);
- int (*scr_write) (struct ata_port *ap, unsigned int sc_reg, u32 val);
+ void (*freeze)(struct ata_port *ap);
+ void (*thaw)(struct ata_port *ap);
+ ata_prereset_fn_t prereset;
+ ata_reset_fn_t softreset;
+ ata_reset_fn_t hardreset;
+ ata_postreset_fn_t postreset;
+ ata_prereset_fn_t pmp_prereset;
+ ata_reset_fn_t pmp_softreset;
+ ata_reset_fn_t pmp_hardreset;
+ ata_postreset_fn_t pmp_postreset;
+ void (*error_handler)(struct ata_port *ap);
+ void (*post_internal_cmd)(struct ata_queued_cmd *qc);
- int (*port_suspend) (struct ata_port *ap, pm_message_t mesg);
- int (*port_resume) (struct ata_port *ap);
- int (*enable_pm) (struct ata_port *ap, enum link_pm policy);
- void (*disable_pm) (struct ata_port *ap);
- int (*port_start) (struct ata_port *ap);
- void (*port_stop) (struct ata_port *ap);
+ /*
+ * Optional features
+ */
+ int (*scr_read)(struct ata_port *ap, unsigned int sc_reg, u32 *val);
+ int (*scr_write)(struct ata_port *ap, unsigned int sc_reg, u32 val);
+ void (*pmp_attach)(struct ata_port *ap);
+ void (*pmp_detach)(struct ata_port *ap);
+ int (*enable_pm)(struct ata_port *ap, enum link_pm policy);
+ void (*disable_pm)(struct ata_port *ap);
- void (*host_stop) (struct ata_host *host);
+ /*
+ * Start, stop, suspend and resume
+ */
+ int (*port_suspend)(struct ata_port *ap, pm_message_t mesg);
+ int (*port_resume)(struct ata_port *ap);
+ int (*port_start)(struct ata_port *ap);
+ void (*port_stop)(struct ata_port *ap);
+ void (*host_stop)(struct ata_host *host);
- void (*bmdma_stop) (struct ata_queued_cmd *qc);
- u8 (*bmdma_status) (struct ata_port *ap);
+#ifdef CONFIG_ATA_SFF
+ /*
+ * SFF / taskfile oriented ops
+ */
+ void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
+ u8 (*sff_check_status)(struct ata_port *ap);
+ u8 (*sff_check_altstatus)(struct ata_port *ap);
+ void (*sff_tf_load)(struct ata_port *ap, const struct ata_taskfile *tf);
+ void (*sff_tf_read)(struct ata_port *ap, struct ata_taskfile *tf);
+ void (*sff_exec_command)(struct ata_port *ap,
+ const struct ata_taskfile *tf);
+ unsigned int (*sff_data_xfer)(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw);
+ u8 (*sff_irq_on)(struct ata_port *);
+ void (*sff_irq_clear)(struct ata_port *);
+
+ void (*bmdma_setup)(struct ata_queued_cmd *qc);
+ void (*bmdma_start)(struct ata_queued_cmd *qc);
+ void (*bmdma_stop)(struct ata_queued_cmd *qc);
+ u8 (*bmdma_status)(struct ata_port *ap);
+#endif /* CONFIG_ATA_SFF */
+
+ /*
+ * Obsolete
+ */
+ void (*phy_reset)(struct ata_port *ap);
+ void (*eng_timeout)(struct ata_port *ap);
+
+ /*
+ * ->inherits must be the last field and all the preceding
+ * fields must be pointers.
+ */
+ const struct ata_port_operations *inherits;
};
struct ata_port_info {
- struct scsi_host_template *sht;
unsigned long flags;
unsigned long link_flags;
unsigned long pio_mask;
unsigned long mwdma_mask;
unsigned long udma_mask;
- const struct ata_port_operations *port_ops;
- irq_handler_t irq_handler;
+ struct ata_port_operations *port_ops;
void *private_data;
};
@@ -758,11 +823,14 @@
#define FIT(v, vmin, vmax) max_t(short, min_t(short, v, vmax), vmin)
+/*
+ * Core layer - drivers/ata/libata-core.c
+ */
extern const unsigned long sata_deb_timing_normal[];
extern const unsigned long sata_deb_timing_hotplug[];
extern const unsigned long sata_deb_timing_long[];
-extern const struct ata_port_operations ata_dummy_port_ops;
+extern struct ata_port_operations ata_dummy_port_ops;
extern const struct ata_port_info ata_dummy_port_info;
static inline const unsigned long *
@@ -781,22 +849,21 @@
extern void sata_print_link_status(struct ata_link *link);
extern void ata_port_probe(struct ata_port *);
-extern void ata_bus_reset(struct ata_port *ap);
extern int sata_set_spd(struct ata_link *link);
+extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
+extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link));
extern int sata_link_debounce(struct ata_link *link,
const unsigned long *params, unsigned long deadline);
extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
unsigned long deadline);
-extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
-extern int ata_std_softreset(struct ata_link *link, unsigned int *classes,
- unsigned long deadline);
extern int sata_link_hardreset(struct ata_link *link,
- const unsigned long *timing, unsigned long deadline);
+ const unsigned long *timing, unsigned long deadline,
+ bool *online, int (*check_ready)(struct ata_link *));
extern int sata_std_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);
extern void ata_port_disable(struct ata_port *);
-extern void ata_std_ports(struct ata_ioports *ioaddr);
extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
@@ -809,7 +876,7 @@
struct scsi_host_template *sht);
extern void ata_host_detach(struct ata_host *host);
extern void ata_host_init(struct ata_host *, struct device *,
- unsigned long, const struct ata_port_operations *);
+ unsigned long, struct ata_port_operations *);
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
@@ -822,7 +889,6 @@
extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
struct ata_port *ap);
-extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
extern int sata_scr_valid(struct ata_link *link);
extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
@@ -834,21 +900,10 @@
extern void ata_host_resume(struct ata_host *host);
#endif
extern int ata_ratelimit(void);
-extern int ata_busy_sleep(struct ata_port *ap,
- unsigned long timeout_pat, unsigned long timeout);
-extern void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline);
-extern int ata_wait_ready(struct ata_port *ap, unsigned long deadline);
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
unsigned long interval_msec,
unsigned long timeout_msec);
-extern unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
- u8 *r_err);
-
-/*
- * Default driver ops implementations
- */
-extern void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
-extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
+extern int atapi_cmd_type(u8 opcode);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
u8 pmp, int is_cmd, u8 *fis);
extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
@@ -862,23 +917,9 @@
extern int ata_xfer_mode2shift(unsigned long xfer_mode);
extern const char *ata_mode_string(unsigned long xfer_mask);
extern unsigned long ata_id_xfermask(const u16 *id);
-extern void ata_noop_dev_select(struct ata_port *ap, unsigned int device);
-extern void ata_std_dev_select(struct ata_port *ap, unsigned int device);
-extern u8 ata_check_status(struct ata_port *ap);
-extern u8 ata_altstatus(struct ata_port *ap);
-extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf);
extern int ata_port_start(struct ata_port *ap);
-extern int ata_sff_port_start(struct ata_port *ap);
-extern irqreturn_t ata_interrupt(int irq, void *dev_instance);
-extern unsigned int ata_data_xfer(struct ata_device *dev,
- unsigned char *buf, unsigned int buflen, int rw);
-extern unsigned int ata_data_xfer_noirq(struct ata_device *dev,
- unsigned char *buf, unsigned int buflen, int rw);
extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
-extern void ata_dumb_qc_prep(struct ata_queued_cmd *qc);
-extern void ata_qc_prep(struct ata_queued_cmd *qc);
extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
-extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem);
extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
@@ -887,24 +928,8 @@
unsigned int ofs, unsigned int len);
extern void ata_id_c_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
-extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
-extern void ata_bmdma_start(struct ata_queued_cmd *qc);
-extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
-extern u8 ata_bmdma_status(struct ata_port *ap);
-extern void ata_bmdma_irq_clear(struct ata_port *ap);
-extern void ata_bmdma_freeze(struct ata_port *ap);
-extern void ata_bmdma_thaw(struct ata_port *ap);
-extern void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
- ata_reset_fn_t softreset,
- ata_reset_fn_t hardreset,
- ata_postreset_fn_t postreset);
-extern void ata_bmdma_error_handler(struct ata_port *ap);
-extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
-extern int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
- u8 status, int in_wq);
extern void ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active,
- void (*finish_qc)(struct ata_queued_cmd *));
+extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *));
extern int ata_std_bios_param(struct scsi_device *sdev,
@@ -916,7 +941,6 @@
int queue_depth);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
-extern u8 ata_irq_on(struct ata_port *ap);
extern int ata_cable_40wire(struct ata_port *ap);
extern int ata_cable_80wire(struct ata_port *ap);
@@ -924,10 +948,7 @@
extern int ata_cable_ignore(struct ata_port *ap);
extern int ata_cable_unknown(struct ata_port *ap);
-/*
- * Timing helpers
- */
-
+/* Timing helpers */
extern unsigned int ata_pio_need_iordy(const struct ata_device *);
extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
extern int ata_timing_compute(struct ata_device *, unsigned short,
@@ -937,24 +958,31 @@
unsigned int);
extern u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle);
-enum {
- ATA_TIMING_SETUP = (1 << 0),
- ATA_TIMING_ACT8B = (1 << 1),
- ATA_TIMING_REC8B = (1 << 2),
- ATA_TIMING_CYC8B = (1 << 3),
- ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B |
- ATA_TIMING_CYC8B,
- ATA_TIMING_ACTIVE = (1 << 4),
- ATA_TIMING_RECOVER = (1 << 5),
- ATA_TIMING_CYCLE = (1 << 6),
- ATA_TIMING_UDMA = (1 << 7),
- ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
- ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
- ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
- ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
+/* PCI */
+#ifdef CONFIG_PCI
+struct pci_dev;
+
+struct pci_bits {
+ unsigned int reg; /* PCI config register to read */
+ unsigned int width; /* 1 (8 bit), 2 (16 bit), 4 (32 bit) */
+ unsigned long mask;
+ unsigned long val;
};
-/* libata-acpi.c */
+extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
+extern void ata_pci_remove_one(struct pci_dev *pdev);
+
+#ifdef CONFIG_PM
+extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
+extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
+extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
+extern int ata_pci_device_resume(struct pci_dev *pdev);
+#endif /* CONFIG_PM */
+#endif /* CONFIG_PCI */
+
+/*
+ * ACPI - drivers/ata/libata-acpi.c
+ */
#ifdef CONFIG_ATA_ACPI
static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
{
@@ -998,56 +1026,8 @@
}
#endif
-#ifdef CONFIG_PCI
-struct pci_dev;
-
-extern int ata_pci_init_one(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi);
-extern void ata_pci_remove_one(struct pci_dev *pdev);
-#ifdef CONFIG_PM
-extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
-extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
-extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
-extern int ata_pci_device_resume(struct pci_dev *pdev);
-#endif
-extern int ata_pci_clear_simplex(struct pci_dev *pdev);
-
-struct pci_bits {
- unsigned int reg; /* PCI config register to read */
- unsigned int width; /* 1 (8 bit), 2 (16 bit), 4 (32 bit) */
- unsigned long mask;
- unsigned long val;
-};
-
-extern int ata_pci_init_sff_host(struct ata_host *host);
-extern int ata_pci_init_bmdma(struct ata_host *host);
-extern int ata_pci_prepare_sff_host(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi,
- struct ata_host **r_host);
-extern int ata_pci_activate_sff_host(struct ata_host *host,
- irq_handler_t irq_handler,
- struct scsi_host_template *sht);
-extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
-extern unsigned long ata_pci_default_filter(struct ata_device *dev,
- unsigned long xfer_mask);
-#endif /* CONFIG_PCI */
-
/*
- * PMP
- */
-extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc);
-extern int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline);
-extern int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline);
-extern void sata_pmp_std_postreset(struct ata_link *link, unsigned int *class);
-extern void sata_pmp_do_eh(struct ata_port *ap,
- ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
- ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
- ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
- ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset);
-
-/*
- * EH
+ * EH - drivers/ata/libata-eh.c
*/
extern void ata_port_schedule_eh(struct ata_port *ap);
extern int ata_link_abort(struct ata_link *link);
@@ -1064,6 +1044,92 @@
extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset);
+extern void ata_std_error_handler(struct ata_port *ap);
+
+/*
+ * Base operations to inherit from and initializers for sht
+ *
+ * Operations
+ *
+ * base : Common to all libata drivers.
+ * sata : SATA controllers w/ native interface.
+ * pmp : SATA controllers w/ PMP support.
+ * sff : SFF ATA controllers w/o BMDMA support.
+ * bmdma : SFF ATA controllers w/ BMDMA support.
+ *
+ * sht initializers
+ *
+ * BASE : Common to all libata drivers. The user must set
+ * sg_tablesize and dma_boundary.
+ * PIO : SFF ATA controllers w/ only PIO support.
+ * BMDMA : SFF ATA controllers w/ BMDMA support. sg_tablesize and
+ * dma_boundary are set to BMDMA limits.
+ * NCQ : SATA controllers supporting NCQ. The user must set
+ * sg_tablesize, dma_boundary and can_queue.
+ */
+extern const struct ata_port_operations ata_base_port_ops;
+extern const struct ata_port_operations sata_port_ops;
+
+#define ATA_BASE_SHT(drv_name) \
+ .module = THIS_MODULE, \
+ .name = drv_name, \
+ .ioctl = ata_scsi_ioctl, \
+ .queuecommand = ata_scsi_queuecmd, \
+ .can_queue = ATA_DEF_QUEUE, \
+ .this_id = ATA_SHT_THIS_ID, \
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN, \
+ .emulated = ATA_SHT_EMULATED, \
+ .use_clustering = ATA_SHT_USE_CLUSTERING, \
+ .proc_name = drv_name, \
+ .slave_configure = ata_scsi_slave_config, \
+ .slave_destroy = ata_scsi_slave_destroy, \
+ .bios_param = ata_std_bios_param
+
+#define ATA_NCQ_SHT(drv_name) \
+ ATA_BASE_SHT(drv_name), \
+ .change_queue_depth = ata_scsi_change_queue_depth
+
+/*
+ * PMP helpers
+ */
+#ifdef CONFIG_SATA_PMP
+static inline bool sata_pmp_supported(struct ata_port *ap)
+{
+ return ap->flags & ATA_FLAG_PMP;
+}
+
+static inline bool sata_pmp_attached(struct ata_port *ap)
+{
+ return ap->nr_pmp_links != 0;
+}
+
+static inline int ata_is_host_link(const struct ata_link *link)
+{
+ return link == &link->ap->link;
+}
+#else /* CONFIG_SATA_PMP */
+static inline bool sata_pmp_supported(struct ata_port *ap)
+{
+ return false;
+}
+
+static inline bool sata_pmp_attached(struct ata_port *ap)
+{
+ return false;
+}
+
+static inline int ata_is_host_link(const struct ata_link *link)
+{
+ return 1;
+}
+#endif /* CONFIG_SATA_PMP */
+
+static inline int sata_srst_pmp(struct ata_link *link)
+{
+ if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
+ return SATA_PMP_CTRL_PORT;
+ return link->pmp;
+}
/*
* printk helpers
@@ -1072,7 +1138,7 @@
printk("%sata%u: "fmt, lv, (ap)->print_id , ##args)
#define ata_link_printk(link, lv, fmt, args...) do { \
- if ((link)->ap->nr_pmp_links) \
+ if (sata_pmp_attached((link)->ap)) \
printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
(link)->pmp , ##args); \
else \
@@ -1092,18 +1158,11 @@
__attribute__ ((format (printf, 2, 3)));
extern void ata_ehi_clear_desc(struct ata_eh_info *ehi);
-static inline void ata_ehi_schedule_probe(struct ata_eh_info *ehi)
-{
- ehi->flags |= ATA_EHI_RESUME_LINK;
- ehi->action |= ATA_EH_SOFTRESET;
- ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
-}
-
static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi)
{
- ata_ehi_schedule_probe(ehi);
+ ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
ehi->flags |= ATA_EHI_HOTPLUGGED;
- ehi->action |= ATA_EH_ENABLE_LINK;
+ ehi->action |= ATA_EH_RESET | ATA_EH_ENABLE_LINK;
ehi->err_mask |= AC_ERR_ATA_BUS;
}
@@ -1124,7 +1183,7 @@
static inline unsigned int ata_tag_internal(unsigned int tag)
{
- return tag == ATA_MAX_QUEUE - 1;
+ return tag == ATA_TAG_INTERNAL;
}
/*
@@ -1165,11 +1224,6 @@
/*
* link helpers
*/
-static inline int ata_is_host_link(const struct ata_link *link)
-{
- return link == &link->ap->link;
-}
-
static inline int ata_link_max_devices(const struct ata_link *link)
{
if (ata_is_host_link(link) && link->ap->flags & ATA_FLAG_SLAVE_POSS)
@@ -1184,7 +1238,7 @@
static inline struct ata_link *ata_port_first_link(struct ata_port *ap)
{
- if (ap->nr_pmp_links)
+ if (sata_pmp_attached(ap))
return ap->pmp_link;
return &ap->link;
}
@@ -1193,8 +1247,8 @@
{
struct ata_port *ap = link->ap;
- if (link == &ap->link) {
- if (!ap->nr_pmp_links)
+ if (ata_is_host_link(link)) {
+ if (!sata_pmp_attached(ap))
return NULL;
return ap->pmp_link;
}
@@ -1220,11 +1274,6 @@
for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \
(dev) >= (link)->device || ((dev) = NULL); (dev)--)
-static inline u8 ata_chk_status(struct ata_port *ap)
-{
- return ap->ops->check_status(ap);
-}
-
/**
* ata_ncq_enabled - Test whether NCQ is enabled
* @dev: ATA device to test for
@@ -1241,74 +1290,6 @@
ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
}
-/**
- * ata_pause - Flush writes and pause 400 nanoseconds.
- * @ap: Port to wait for.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static inline void ata_pause(struct ata_port *ap)
-{
- ata_altstatus(ap);
- ndelay(400);
-}
-
-
-/**
- * ata_busy_wait - Wait for a port status register
- * @ap: Port to wait for.
- * @bits: bits that must be clear
- * @max: number of 10uS waits to perform
- *
- * Waits up to max*10 microseconds for the selected bits in the port's
- * status register to be cleared.
- * Returns final value of status register.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits,
- unsigned int max)
-{
- u8 status;
-
- do {
- udelay(10);
- status = ata_chk_status(ap);
- max--;
- } while (status != 0xff && (status & bits) && (max > 0));
-
- return status;
-}
-
-
-/**
- * ata_wait_idle - Wait for a port to be idle.
- * @ap: Port to wait for.
- *
- * Waits up to 10ms for port's BUSY and DRQ signals to clear.
- * Returns final value of status register.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static inline u8 ata_wait_idle(struct ata_port *ap)
-{
- u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
-
-#ifdef ATA_DEBUG
- if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
- ata_port_printk(ap, KERN_DEBUG, "abnormal Status 0x%X\n",
- status);
-#endif
-
- return status;
-}
-
static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
{
qc->tf.ctl |= ATA_NIEN;
@@ -1379,27 +1360,6 @@
ata_id_has_flush_ext(dev->id);
}
-static inline int atapi_cmd_type(u8 opcode)
-{
- switch (opcode) {
- case GPCMD_READ_10:
- case GPCMD_READ_12:
- return ATAPI_READ;
-
- case GPCMD_WRITE_10:
- case GPCMD_WRITE_12:
- case GPCMD_WRITE_AND_VERIFY_10:
- return ATAPI_WRITE;
-
- case GPCMD_READ_CD:
- case GPCMD_READ_CD_MSF:
- return ATAPI_READ_CD;
-
- default:
- return ATAPI_MISC;
- }
-}
-
static inline unsigned int ac_err_mask(u8 status)
{
if (status & (ATA_BUSY | ATA_DRQ))
@@ -1422,4 +1382,171 @@
return *(struct ata_port **)&host->hostdata[0];
}
+
+/**************************************************************************
+ * PMP - drivers/ata/libata-pmp.c
+ */
+#ifdef CONFIG_SATA_PMP
+
+extern const struct ata_port_operations sata_pmp_port_ops;
+
+extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc);
+extern void sata_pmp_error_handler(struct ata_port *ap);
+
+#else /* CONFIG_SATA_PMP */
+
+#define sata_pmp_port_ops sata_port_ops
+#define sata_pmp_qc_defer_cmd_switch ata_std_qc_defer
+#define sata_pmp_error_handler ata_std_error_handler
+
+#endif /* CONFIG_SATA_PMP */
+
+
+/**************************************************************************
+ * SFF - drivers/ata/libata-sff.c
+ */
+#ifdef CONFIG_ATA_SFF
+
+extern const struct ata_port_operations ata_sff_port_ops;
+extern const struct ata_port_operations ata_bmdma_port_ops;
+
+/* PIO only, sg_tablesize and dma_boundary limits can be removed */
+#define ATA_PIO_SHT(drv_name) \
+ ATA_BASE_SHT(drv_name), \
+ .sg_tablesize = LIBATA_MAX_PRD, \
+ .dma_boundary = ATA_DMA_BOUNDARY
+
+#define ATA_BMDMA_SHT(drv_name) \
+ ATA_BASE_SHT(drv_name), \
+ .sg_tablesize = LIBATA_MAX_PRD, \
+ .dma_boundary = ATA_DMA_BOUNDARY
+
+extern void ata_sff_qc_prep(struct ata_queued_cmd *qc);
+extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
+extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
+extern u8 ata_sff_check_status(struct ata_port *ap);
+extern u8 ata_sff_altstatus(struct ata_port *ap);
+extern int ata_sff_busy_sleep(struct ata_port *ap,
+ unsigned long timeout_pat, unsigned long timeout);
+extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
+extern void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
+extern void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
+extern void ata_sff_exec_command(struct ata_port *ap,
+ const struct ata_taskfile *tf);
+extern unsigned int ata_sff_data_xfer(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw);
+extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev,
+ unsigned char *buf, unsigned int buflen, int rw);
+extern u8 ata_sff_irq_on(struct ata_port *ap);
+extern void ata_sff_irq_clear(struct ata_port *ap);
+extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
+ u8 status, int in_wq);
+extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
+extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
+extern unsigned int ata_sff_host_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc);
+extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
+extern void ata_sff_freeze(struct ata_port *ap);
+extern void ata_sff_thaw(struct ata_port *ap);
+extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline);
+extern unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
+ u8 *r_err);
+extern int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask,
+ unsigned long deadline);
+extern int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
+ unsigned long deadline);
+extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes);
+extern void ata_sff_error_handler(struct ata_port *ap);
+extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
+extern int ata_sff_port_start(struct ata_port *ap);
+extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
+extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
+ unsigned long xfer_mask);
+extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
+extern void ata_bmdma_start(struct ata_queued_cmd *qc);
+extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
+extern u8 ata_bmdma_status(struct ata_port *ap);
+extern void ata_bus_reset(struct ata_port *ap);
+
+#ifdef CONFIG_PCI
+extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
+extern int ata_pci_bmdma_init(struct ata_host *host);
+extern int ata_pci_sff_init_host(struct ata_host *host);
+extern int ata_pci_sff_prepare_host(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct ata_host **r_host);
+extern int ata_pci_sff_activate_host(struct ata_host *host,
+ irq_handler_t irq_handler,
+ struct scsi_host_template *sht);
+extern int ata_pci_sff_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct scsi_host_template *sht, void *host_priv);
+#endif /* CONFIG_PCI */
+
+/**
+ * ata_sff_pause - Flush writes and pause 400 nanoseconds.
+ * @ap: Port to wait for.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static inline void ata_sff_pause(struct ata_port *ap)
+{
+ ata_sff_altstatus(ap);
+ ndelay(400);
+}
+
+/**
+ * ata_sff_busy_wait - Wait for a port status register
+ * @ap: Port to wait for.
+ * @bits: bits that must be clear
+ * @max: number of 10uS waits to perform
+ *
+ * Waits up to max*10 microseconds for the selected bits in the port's
+ * status register to be cleared.
+ * Returns final value of status register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static inline u8 ata_sff_busy_wait(struct ata_port *ap, unsigned int bits,
+ unsigned int max)
+{
+ u8 status;
+
+ do {
+ udelay(10);
+ status = ap->ops->sff_check_status(ap);
+ max--;
+ } while (status != 0xff && (status & bits) && (max > 0));
+
+ return status;
+}
+
+/**
+ * ata_wait_idle - Wait for a port to be idle.
+ * @ap: Port to wait for.
+ *
+ * Waits up to 10ms for port's BUSY and DRQ signals to clear.
+ * Returns final value of status register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static inline u8 ata_wait_idle(struct ata_port *ap)
+{
+ u8 status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+
+#ifdef ATA_DEBUG
+ if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
+ ata_port_printk(ap, KERN_DEBUG, "abnormal Status 0x%X\n",
+ status);
+#endif
+
+ return status;
+}
+#endif /* CONFIG_ATA_SFF */
+
#endif /* __LINUX_LIBATA_H__ */
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 0592936..2119610 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -17,8 +17,24 @@
# define asmregparm
#endif
-#ifndef prevent_tail_call
-# define prevent_tail_call(ret) do { } while (0)
+/*
+ * This is used by architectures to keep arguments on the stack
+ * untouched by the compiler by keeping them live until the end.
+ * The argument stack may be owned by the assembly-language
+ * caller, not the callee, and gcc doesn't always understand
+ * that.
+ *
+ * We have the return value, and a maximum of six arguments.
+ *
+ * This should always be followed by a "return ret" for the
+ * protection to work (ie no more work that the compiler might
+ * end up needing stack temporaries for).
+ */
+/* Assembly files may be compiled with -traditional .. */
+#ifndef __ASSEMBLY__
+#ifndef asmlinkage_protect
+# define asmlinkage_protect(n, ret, args...) do { } while (0)
+#endif
#endif
#ifndef __ALIGN
diff --git a/include/linux/mbcache.h b/include/linux/mbcache.h
index 99e044b..a09b84e 100644
--- a/include/linux/mbcache.h
+++ b/include/linux/mbcache.h
@@ -34,7 +34,7 @@
/* Functions on cache entries */
-struct mb_cache_entry *mb_cache_entry_alloc(struct mb_cache *);
+struct mb_cache_entry *mb_cache_entry_alloc(struct mb_cache *, gfp_t);
int mb_cache_entry_insert(struct mb_cache_entry *, struct block_device *,
sector_t, unsigned int[]);
void mb_cache_entry_release(struct mb_cache_entry *);
diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h
index 7d1eaa9..77323a7 100644
--- a/include/linux/mlx4/cmd.h
+++ b/include/linux/mlx4/cmd.h
@@ -81,7 +81,7 @@
MLX4_CMD_SW2HW_CQ = 0x16,
MLX4_CMD_HW2SW_CQ = 0x17,
MLX4_CMD_QUERY_CQ = 0x18,
- MLX4_CMD_RESIZE_CQ = 0x2c,
+ MLX4_CMD_MODIFY_CQ = 0x2c,
/* SRQ commands */
MLX4_CMD_SW2HW_SRQ = 0x35,
diff --git a/include/linux/mlx4/cq.h b/include/linux/mlx4/cq.h
index 0181e0a..071cf96 100644
--- a/include/linux/mlx4/cq.h
+++ b/include/linux/mlx4/cq.h
@@ -45,11 +45,11 @@
u8 sl;
u8 reserved1;
__be16 rlid;
- u32 reserved2;
+ __be32 ipoib_status;
__be32 byte_cnt;
__be16 wqe_index;
__be16 checksum;
- u8 reserved3[3];
+ u8 reserved2[3];
u8 owner_sr_opcode;
};
@@ -85,6 +85,16 @@
MLX4_CQE_SYNDROME_REMOTE_ABORTED_ERR = 0x22,
};
+enum {
+ MLX4_CQE_IPOIB_STATUS_IPV4 = 1 << 22,
+ MLX4_CQE_IPOIB_STATUS_IPV4F = 1 << 23,
+ MLX4_CQE_IPOIB_STATUS_IPV6 = 1 << 24,
+ MLX4_CQE_IPOIB_STATUS_IPV4OPT = 1 << 25,
+ MLX4_CQE_IPOIB_STATUS_TCP = 1 << 26,
+ MLX4_CQE_IPOIB_STATUS_UDP = 1 << 27,
+ MLX4_CQE_IPOIB_STATUS_IPOK = 1 << 28,
+};
+
static inline void mlx4_cq_arm(struct mlx4_cq *cq, u32 cmd,
void __iomem *uar_page,
spinlock_t *doorbell_lock)
@@ -120,4 +130,9 @@
MLX4_CQ_DB_REQ_NOT = 2 << 24
};
+int mlx4_cq_modify(struct mlx4_dev *dev, struct mlx4_cq *cq,
+ u16 count, u16 period);
+int mlx4_cq_resize(struct mlx4_dev *dev, struct mlx4_cq *cq,
+ int entries, struct mlx4_mtt *mtt);
+
#endif /* MLX4_CQ_H */
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 6cdf813..ff7df1a 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -186,6 +186,7 @@
u32 flags;
u16 stat_rate_support;
u8 port_width_cap[MLX4_MAX_PORTS + 1];
+ int max_gso_sz;
};
struct mlx4_buf_list {
diff --git a/include/linux/mlx4/driver.h b/include/linux/mlx4/driver.h
index 1b835ca..53c5fdb 100644
--- a/include/linux/mlx4/driver.h
+++ b/include/linux/mlx4/driver.h
@@ -48,8 +48,7 @@
void * (*add) (struct mlx4_dev *dev);
void (*remove)(struct mlx4_dev *dev, void *context);
void (*event) (struct mlx4_dev *dev, void *context,
- enum mlx4_dev_event event, int subtype,
- int port);
+ enum mlx4_dev_event event, int port);
struct list_head list;
};
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 09a2230..a5e43fe 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -158,10 +158,12 @@
#define MLX4_FW_VER_WQE_CTRL_NEC mlx4_fw_ver(2, 2, 232)
enum {
- MLX4_WQE_CTRL_NEC = 1 << 29,
- MLX4_WQE_CTRL_FENCE = 1 << 6,
- MLX4_WQE_CTRL_CQ_UPDATE = 3 << 2,
- MLX4_WQE_CTRL_SOLICITED = 1 << 1,
+ MLX4_WQE_CTRL_NEC = 1 << 29,
+ MLX4_WQE_CTRL_FENCE = 1 << 6,
+ MLX4_WQE_CTRL_CQ_UPDATE = 3 << 2,
+ MLX4_WQE_CTRL_SOLICITED = 1 << 1,
+ MLX4_WQE_CTRL_IP_CSUM = 1 << 4,
+ MLX4_WQE_CTRL_TCP_UDP_CSUM = 1 << 5,
};
struct mlx4_wqe_ctrl_seg {
@@ -217,6 +219,11 @@
__be32 reservd[2];
};
+struct mlx4_lso_seg {
+ __be32 mss_hdr_size;
+ __be32 header[0];
+};
+
struct mlx4_wqe_bind_seg {
__be32 flags1;
__be32 flags2;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a2f0032..ee81906 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -383,9 +383,11 @@
static inline void napi_complete(struct napi_struct *n)
{
- local_irq_disable();
+ unsigned long flags;
+
+ local_irq_save(flags);
__napi_complete(n);
- local_irq_enable();
+ local_irq_restore(flags);
}
/**
@@ -1072,12 +1074,14 @@
}
/* Use this variant when it is known for sure that it
- * is executing from interrupt context.
+ * is executing from hardware interrupt context or with hardware interrupts
+ * disabled.
*/
extern void dev_kfree_skb_irq(struct sk_buff *skb);
/* Use this variant in places where it could be invoked
- * either from interrupt or non-interrupt context.
+ * from either hardware interrupt or other context, with hardware interrupts
+ * either disabled or enabled.
*/
extern void dev_kfree_skb_any(struct sk_buff *skb);
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 29dd558..b2f05c2 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -175,7 +175,7 @@
struct pnp_dev {
struct device dev; /* Driver Model device interface */
u64 dma_mask;
- unsigned char number; /* used as an index, must be unique */
+ unsigned int number; /* used as an index, must be unique */
int status;
struct list_head global_list; /* node in global list of devices */
diff --git a/include/linux/quota.h b/include/linux/quota.h
index 6e0393a..eb560d0 100644
--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -160,14 +160,18 @@
#ifdef __KERNEL__
-#include <linux/spinlock.h>
-#include <linux/rwsem.h>
+#include <linux/list.h>
#include <linux/mutex.h>
+#include <linux/rwsem.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
#include <linux/dqblk_xfs.h>
#include <linux/dqblk_v1.h>
#include <linux/dqblk_v2.h>
+#include <asm/atomic.h>
+
extern spinlock_t dq_data_lock;
/* Maximal numbers of writes for quota operation (insert/delete/update)
diff --git a/include/linux/semaphore.h b/include/linux/semaphore.h
new file mode 100644
index 0000000..9cae64b
--- /dev/null
+++ b/include/linux/semaphore.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2008 Intel Corporation
+ * Author: Matthew Wilcox <willy@linux.intel.com>
+ *
+ * Distributed under the terms of the GNU GPL, version 2
+ *
+ * Please see kernel/semaphore.c for documentation of these functions
+ */
+#ifndef __LINUX_SEMAPHORE_H
+#define __LINUX_SEMAPHORE_H
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/* Please don't access any members of this structure directly */
+struct semaphore {
+ spinlock_t lock;
+ unsigned int count;
+ struct list_head wait_list;
+};
+
+#define __SEMAPHORE_INITIALIZER(name, n) \
+{ \
+ .lock = __SPIN_LOCK_UNLOCKED((name).lock), \
+ .count = n, \
+ .wait_list = LIST_HEAD_INIT((name).wait_list), \
+}
+
+#define __DECLARE_SEMAPHORE_GENERIC(name, count) \
+ struct semaphore name = __SEMAPHORE_INITIALIZER(name, count)
+
+#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name, 1)
+
+static inline void sema_init(struct semaphore *sem, int val)
+{
+ static struct lock_class_key __key;
+ *sem = (struct semaphore) __SEMAPHORE_INITIALIZER(*sem, val);
+ lockdep_init_map(&sem->lock.dep_map, "semaphore->lock", &__key, 0);
+}
+
+#define init_MUTEX(sem) sema_init(sem, 1)
+#define init_MUTEX_LOCKED(sem) sema_init(sem, 0)
+
+extern void down(struct semaphore *sem);
+extern int __must_check down_interruptible(struct semaphore *sem);
+extern int __must_check down_killable(struct semaphore *sem);
+extern int __must_check down_trylock(struct semaphore *sem);
+extern int __must_check down_timeout(struct semaphore *sem, long jiffies);
+extern void up(struct semaphore *sem);
+
+#endif /* __LINUX_SEMAPHORE_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 289942f..7cb094a8 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -213,6 +213,10 @@
void (*config_port)(struct uart_port *, int);
int (*verify_port)(struct uart_port *, struct serial_struct *);
int (*ioctl)(struct uart_port *, unsigned int, unsigned long);
+#ifdef CONFIG_CONSOLE_POLL
+ void (*poll_put_char)(struct uart_port *, unsigned char);
+ int (*poll_get_char)(struct uart_port *);
+#endif
};
#define UART_CONFIG_TYPE (1 << 0)
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index b00c1c7..79d59c9 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -45,9 +45,9 @@
struct kmem_cache_node {
spinlock_t list_lock; /* Protect partial list and nr_partial */
unsigned long nr_partial;
- atomic_long_t nr_slabs;
struct list_head partial;
#ifdef CONFIG_SLUB_DEBUG
+ atomic_long_t nr_slabs;
struct list_head full;
#endif
};
diff --git a/include/linux/spinlock.h b/include/linux/spinlock.h
index 576a5f7..d311a09 100644
--- a/include/linux/spinlock.h
+++ b/include/linux/spinlock.h
@@ -296,43 +296,6 @@
})
/*
- * Locks two spinlocks l1 and l2.
- * l1_first indicates if spinlock l1 should be taken first.
- */
-static inline void double_spin_lock(spinlock_t *l1, spinlock_t *l2,
- bool l1_first)
- __acquires(l1)
- __acquires(l2)
-{
- if (l1_first) {
- spin_lock(l1);
- spin_lock(l2);
- } else {
- spin_lock(l2);
- spin_lock(l1);
- }
-}
-
-/*
- * Unlocks two spinlocks l1 and l2.
- * l1_taken_first indicates if spinlock l1 was taken first and therefore
- * should be released after spinlock l2.
- */
-static inline void double_spin_unlock(spinlock_t *l1, spinlock_t *l2,
- bool l1_taken_first)
- __releases(l1)
- __releases(l2)
-{
- if (l1_taken_first) {
- spin_unlock(l2);
- spin_unlock(l1);
- } else {
- spin_unlock(l1);
- spin_unlock(l2);
- }
-}
-
-/*
* Pull the atomic_t declaration:
* (asm-mips/atomic.h needs above definitions)
*/
@@ -341,6 +304,9 @@
* atomic_dec_and_lock - lock on reaching reference count zero
* @atomic: the atomic counter
* @lock: the spinlock in question
+ *
+ * Decrements @atomic by 1. If the result is 0, returns true and locks
+ * @lock. Returns false for all other cases.
*/
extern int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock);
#define atomic_dec_and_lock(atomic, lock) \
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 20add65..db53def 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -129,6 +129,10 @@
const struct ssb_bus_ops *ops;
struct device *dev;
+ /* Pointer to the device that has to be used for
+ * any DMA related operation. */
+ struct device *dma_dev;
+
struct ssb_bus *bus;
struct ssb_device_id id;
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 818ca1c..90c1c19 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -50,7 +50,7 @@
};
#define THERMAL_TRIPS_NONE -1
-#define THERMAL_MAX_TRIPS 10
+#define THERMAL_MAX_TRIPS 12
#define THERMAL_NAME_LENGTH 20
struct thermal_cooling_device {
int id;
diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h
index 421323e..accd7ba 100644
--- a/include/linux/thread_info.h
+++ b/include/linux/thread_info.h
@@ -9,6 +9,9 @@
#include <linux/types.h>
+struct timespec;
+struct compat_timespec;
+
/*
* System call restart block.
*/
@@ -26,6 +29,15 @@
u32 bitset;
u64 time;
} futex;
+ /* For nanosleep */
+ struct {
+ clockid_t index;
+ struct timespec __user *rmtp;
+#ifdef CONFIG_COMPAT
+ struct compat_timespec __user *compat_rmtp;
+#endif
+ u64 expires;
+ } nanosleep;
};
};
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 85c95cd..21f69ac 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -125,6 +125,7 @@
#include <linux/cdev.h>
struct tty_struct;
+struct tty_driver;
struct tty_operations {
int (*open)(struct tty_struct * tty, struct file * filp);
@@ -157,6 +158,11 @@
int (*tiocmget)(struct tty_struct *tty, struct file *file);
int (*tiocmset)(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
+#ifdef CONFIG_CONSOLE_POLL
+ int (*poll_init)(struct tty_driver *driver, int line, char *options);
+ int (*poll_get_char)(struct tty_driver *driver, int line);
+ void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
+#endif
};
struct tty_driver {
@@ -220,6 +226,11 @@
int (*tiocmget)(struct tty_struct *tty, struct file *file);
int (*tiocmset)(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
+#ifdef CONFIG_CONSOLE_POLL
+ int (*poll_init)(struct tty_driver *driver, int line, char *options);
+ int (*poll_get_char)(struct tty_driver *driver, int line);
+ void (*poll_put_char)(struct tty_driver *driver, int line, char ch);
+#endif
struct list_head tty_drivers;
};
@@ -230,6 +241,7 @@
void put_tty_driver(struct tty_driver *driver);
void tty_set_operations(struct tty_driver *driver,
const struct tty_operations *op);
+extern struct tty_driver *tty_find_polling_driver(char *name, int *line);
/* tty driver magic number */
#define TTY_DRIVER_MAGIC 0x5402
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
index 975c963..fec6dec 100644
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -84,4 +84,26 @@
ret; \
})
+/*
+ * probe_kernel_read(): safely attempt to read from a location
+ * @dst: pointer to the buffer that shall take the data
+ * @src: address to read from
+ * @size: size of the data chunk
+ *
+ * Safely read from address @src to the buffer at @dst. If a kernel fault
+ * happens, handle that and return -EFAULT.
+ */
+extern long probe_kernel_read(void *dst, void *src, size_t size);
+
+/*
+ * probe_kernel_write(): safely attempt to write to a location
+ * @dst: address to write to
+ * @src: pointer to the data that shall be written
+ * @size: size of the data chunk
+ *
+ * Safely write to address @dst from the buffer at @src. If a kernel fault
+ * happens, handle that and return -EFAULT.
+ */
+extern long probe_kernel_write(void *dst, void *src, size_t size);
+
#endif /* __LINUX_UACCESS_H__ */
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 12c18ac..e7d1084 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -41,6 +41,8 @@
* Returns NULL or the "data" token handed to add_buf.
* @disable_cb: disable callbacks
* vq: the struct virtqueue we're talking about.
+ * Note that this is not necessarily synchronous, hence unreliable and only
+ * useful as an optimization.
* @enable_cb: restart callbacks after disable_cb.
* vq: the struct virtqueue we're talking about.
* This re-enables callbacks; it returns "false" if there are pending
@@ -48,7 +50,8 @@
* checking for more work, and enabling callbacks.
*
* Locking rules are straightforward: the driver is responsible for
- * locking. No two operations may be invoked simultaneously.
+ * locking. No two operations may be invoked simultaneously, with the exception
+ * of @disable_cb.
*
* All operations can be called in any context.
*/
diff --git a/include/net/inet_ecn.h b/include/net/inet_ecn.h
index ba33db0..7040a78 100644
--- a/include/net/inet_ecn.h
+++ b/include/net/inet_ecn.h
@@ -47,7 +47,7 @@
} while (0)
#define IP6_ECN_flow_xmit(sk, label) do { \
- if (INET_ECN_is_capable(inet_sk(sk)->tos)) \
+ if (INET_ECN_is_capable(inet6_sk(sk)->tclass)) \
(label) |= htonl(INET_ECN_ECT_0 << 20); \
} while (0)
diff --git a/include/net/llc.h b/include/net/llc.h
index f502458..7940da1 100644
--- a/include/net/llc.h
+++ b/include/net/llc.h
@@ -65,7 +65,6 @@
extern struct list_head llc_sap_list;
extern rwlock_t llc_sap_list_lock;
-extern unsigned char llc_station_mac_sa[ETH_ALEN];
extern int llc_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev);
diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h
index 4a8f58b..75b8e29 100644
--- a/include/net/llc_pdu.h
+++ b/include/net/llc_pdu.h
@@ -381,7 +381,7 @@
xid_info->fmt_id = LLC_XID_FMT_ID; /* 0x81 */
xid_info->type = svcs_supported;
xid_info->rw = rx_window << 1; /* size of receive window */
- skb_put(skb, 3);
+ skb_put(skb, sizeof(struct llc_xid_info));
}
/**
@@ -406,7 +406,7 @@
xid_info->fmt_id = LLC_XID_FMT_ID;
xid_info->type = svcs_supported;
xid_info->rw = rx_window << 1;
- skb_put(skb, 3);
+ skb_put(skb, sizeof(struct llc_xid_info));
}
/* LLC Type 2 FRMR response information field format */
diff --git a/include/net/llc_sap.h b/include/net/llc_sap.h
index 2c56dbe..ed25bec 100644
--- a/include/net/llc_sap.h
+++ b/include/net/llc_sap.h
@@ -1,5 +1,8 @@
#ifndef LLC_SAP_H
#define LLC_SAP_H
+
+#include <asm/types.h>
+
/*
* Copyright (c) 1997 by Procom Technology,Inc.
* 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
@@ -19,8 +22,8 @@
extern void llc_sap_rtn_pdu(struct llc_sap *sap, struct sk_buff *skb);
extern void llc_save_primitive(struct sock *sk, struct sk_buff* skb,
unsigned char prim);
-extern struct sk_buff *llc_alloc_frame(struct sock *sk,
- struct net_device *dev);
+extern struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+ u8 type, u32 data_size);
extern void llc_build_and_send_test_pkt(struct llc_sap *sap,
struct sk_buff *skb,
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index 10ae2da..35b1e83 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -104,6 +104,7 @@
SCTP_CMD_ADAPTATION_IND, /* generate and send adaptation event */
SCTP_CMD_ASSOC_SHKEY, /* generate the association shared keys */
SCTP_CMD_T1_RETRAN, /* Mark for retransmission after T1 timeout */
+ SCTP_CMD_UPDATE_INITTAG, /* Update peer inittag */
SCTP_CMD_LAST
} sctp_verb_t;
diff --git a/include/net/sctp/ulpevent.h b/include/net/sctp/ulpevent.h
index 9bcfc12..7ea12e8 100644
--- a/include/net/sctp/ulpevent.h
+++ b/include/net/sctp/ulpevent.h
@@ -67,7 +67,7 @@
};
/* Retrieve the skb this event sits inside of. */
-static inline struct sk_buff *sctp_event2skb(struct sctp_ulpevent *ev)
+static inline struct sk_buff *sctp_event2skb(const struct sctp_ulpevent *ev)
{
return container_of((void *)ev, struct sk_buff, cb);
}
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 7de4ea3..4fd3eb2 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -752,6 +752,8 @@
return tp->packets_out - tcp_left_out(tp) + tp->retrans_out;
}
+extern int tcp_limit_reno_sacked(struct tcp_sock *tp);
+
/* If cwnd > ssthresh, we may raise ssthresh to be half-way to cwnd.
* The exception is rate halving phase, when cwnd is decreasing towards
* ssthresh.
diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h
index 64a721f..8d65bf0 100644
--- a/include/rdma/ib_user_verbs.h
+++ b/include/rdma/ib_user_verbs.h
@@ -533,7 +533,10 @@
__u32 num_sge;
__u32 opcode;
__u32 send_flags;
- __u32 imm_data;
+ union {
+ __u32 imm_data;
+ __u32 invalidate_rkey;
+ } ex;
union {
struct {
__u64 remote_addr;
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 701e7b4..95bf4ba 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -94,7 +94,7 @@
IB_DEVICE_SRQ_RESIZE = (1<<13),
IB_DEVICE_N_NOTIFY_CQ = (1<<14),
IB_DEVICE_ZERO_STAG = (1<<15),
- IB_DEVICE_SEND_W_INV = (1<<16),
+ IB_DEVICE_RESERVED = (1<<16), /* old SEND_W_INV */
IB_DEVICE_MEM_WINDOW = (1<<17),
/*
* Devices should set IB_DEVICE_UD_IP_SUM if they support
@@ -104,6 +104,8 @@
* IPoIB driver may set NETIF_F_IP_CSUM for datagram mode.
*/
IB_DEVICE_UD_IP_CSUM = (1<<18),
+ IB_DEVICE_UD_TSO = (1<<19),
+ IB_DEVICE_SEND_W_INV = (1<<21),
};
enum ib_atomic_cap {
@@ -411,6 +413,7 @@
IB_WC_COMP_SWAP,
IB_WC_FETCH_ADD,
IB_WC_BIND_MW,
+ IB_WC_LSO,
/*
* Set value of IB_WC_RECV so consumers can test if a completion is a
* receive by testing (opcode & IB_WC_RECV).
@@ -495,6 +498,10 @@
IB_QPT_RAW_ETY
};
+enum ib_qp_create_flags {
+ IB_QP_CREATE_IPOIB_UD_LSO = 1 << 0,
+};
+
struct ib_qp_init_attr {
void (*event_handler)(struct ib_event *, void *);
void *qp_context;
@@ -504,6 +511,7 @@
struct ib_qp_cap cap;
enum ib_sig_type sq_sig_type;
enum ib_qp_type qp_type;
+ enum ib_qp_create_flags create_flags;
u8 port_num; /* special QP types only */
};
@@ -617,7 +625,9 @@
IB_WR_SEND_WITH_IMM,
IB_WR_RDMA_READ,
IB_WR_ATOMIC_CMP_AND_SWP,
- IB_WR_ATOMIC_FETCH_AND_ADD
+ IB_WR_ATOMIC_FETCH_AND_ADD,
+ IB_WR_LSO,
+ IB_WR_SEND_WITH_INV,
};
enum ib_send_flags {
@@ -641,7 +651,10 @@
int num_sge;
enum ib_wr_opcode opcode;
int send_flags;
- __be32 imm_data;
+ union {
+ __be32 imm_data;
+ u32 invalidate_rkey;
+ } ex;
union {
struct {
u64 remote_addr;
@@ -655,6 +668,9 @@
} atomic;
struct {
struct ib_ah *ah;
+ void *header;
+ int hlen;
+ int mss;
u32 remote_qpn;
u32 remote_qkey;
u16 pkey_index; /* valid for GSI only */
@@ -730,7 +746,7 @@
struct ib_ucontext *context; /* associated user context */
void *object; /* containing object */
struct list_head list; /* link to context's list */
- u32 id; /* index into kernel idr */
+ int id; /* index into kernel idr */
struct kref ref;
struct rw_semaphore mutex; /* protects .live */
int live;
@@ -971,6 +987,8 @@
int comp_vector,
struct ib_ucontext *context,
struct ib_udata *udata);
+ int (*modify_cq)(struct ib_cq *cq, u16 cq_count,
+ u16 cq_period);
int (*destroy_cq)(struct ib_cq *cq);
int (*resize_cq)(struct ib_cq *cq, int cqe,
struct ib_udata *udata);
@@ -1376,6 +1394,15 @@
int ib_resize_cq(struct ib_cq *cq, int cqe);
/**
+ * ib_modify_cq - Modifies moderation params of the CQ
+ * @cq: The CQ to modify.
+ * @cq_count: number of CQEs that will trigger an event
+ * @cq_period: max period of time in usec before triggering an event
+ *
+ */
+int ib_modify_cq(struct ib_cq *cq, u16 cq_count, u16 cq_period);
+
+/**
* ib_destroy_cq - Destroys the specified CQ.
* @cq: The CQ to destroy.
*/
diff --git a/init/Kconfig b/init/Kconfig
index a97924b..7fccf09 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -763,7 +763,7 @@
config SLABINFO
bool
depends on PROC_FS
- depends on SLAB || SLUB
+ depends on SLAB || SLUB_DEBUG
default y
config RT_MUTEXES
diff --git a/kernel/Makefile b/kernel/Makefile
index 6c584c5..6c5f081 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -8,7 +8,7 @@
signal.o sys.o kmod.o workqueue.o pid.o \
rcupdate.o extable.o params.o posix-timers.o \
kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \
- hrtimer.o rwsem.o nsproxy.o srcu.o \
+ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \
notifier.o ksysfs.o pm_qos_params.o
obj-$(CONFIG_SYSCTL) += sysctl_check.o
@@ -53,6 +53,7 @@
obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
obj-$(CONFIG_KPROBES) += kprobes.o
+obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o
obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
obj-$(CONFIG_SECCOMP) += seccomp.o
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 53d86b4..6d8de05 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -782,7 +782,14 @@
if (!*token)
return -EINVAL;
if (!strcmp(token, "all")) {
- opts->subsys_bits = (1 << CGROUP_SUBSYS_COUNT) - 1;
+ /* Add all non-disabled subsystems */
+ int i;
+ opts->subsys_bits = 0;
+ for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+ struct cgroup_subsys *ss = subsys[i];
+ if (!ss->disabled)
+ opts->subsys_bits |= 1ul << i;
+ }
} else if (!strcmp(token, "noprefix")) {
set_bit(ROOT_NOPREFIX, &opts->flags);
} else if (!strncmp(token, "release_agent=", 14)) {
@@ -800,7 +807,8 @@
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
ss = subsys[i];
if (!strcmp(token, ss->name)) {
- set_bit(i, &opts->subsys_bits);
+ if (!ss->disabled)
+ set_bit(i, &opts->subsys_bits);
break;
}
}
@@ -1714,7 +1722,12 @@
use_task_css_set_links = 1;
do_each_thread(g, p) {
task_lock(p);
- if (list_empty(&p->cg_list))
+ /*
+ * We should check if the process is exiting, otherwise
+ * it will race with cgroup_exit() in that the list
+ * entry won't be deleted though the process has exited.
+ */
+ if (!(p->flags & PF_EXITING) && list_empty(&p->cg_list))
list_add(&p->cg_list, &p->cgroups->tasks);
task_unlock(p);
} while_each_thread(g, p);
@@ -2561,6 +2574,7 @@
/* Skip this hierarchy if it has no active subsystems */
if (!root->actual_subsys_bits)
continue;
+ seq_printf(m, "%lu:", root->subsys_bits);
for_each_subsys(root, ss)
seq_printf(m, "%s%s", count++ ? "," : "", ss->name);
seq_putc(m, ':');
@@ -2600,13 +2614,13 @@
{
int i;
- seq_puts(m, "#subsys_name\thierarchy\tnum_cgroups\n");
+ seq_puts(m, "#subsys_name\thierarchy\tnum_cgroups\tenabled\n");
mutex_lock(&cgroup_mutex);
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
- seq_printf(m, "%s\t%lu\t%d\n",
+ seq_printf(m, "%s\t%lu\t%d\t%d\n",
ss->name, ss->root->subsys_bits,
- ss->root->number_of_cgroups);
+ ss->root->number_of_cgroups, !ss->disabled);
}
mutex_unlock(&cgroup_mutex);
return 0;
@@ -3010,3 +3024,27 @@
spin_unlock(&release_list_lock);
mutex_unlock(&cgroup_mutex);
}
+
+static int __init cgroup_disable(char *str)
+{
+ int i;
+ char *token;
+
+ while ((token = strsep(&str, ",")) != NULL) {
+ if (!*token)
+ continue;
+
+ for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+ struct cgroup_subsys *ss = subsys[i];
+
+ if (!strcmp(token, ss->name)) {
+ ss->disabled = 1;
+ printk(KERN_INFO "Disabling %s control group"
+ " subsystem\n", ss->name);
+ break;
+ }
+ }
+ }
+ return 1;
+}
+__setup("cgroup_disable=", cgroup_disable);
diff --git a/kernel/compat.c b/kernel/compat.c
index 5f0e201..9c48abf 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -47,15 +47,14 @@
mm_segment_t oldfs;
long ret;
- rmtp = (struct compat_timespec __user *)(restart->arg1);
- restart->arg1 = (unsigned long)&rmt;
+ restart->nanosleep.rmtp = (struct timespec __user *) &rmt;
oldfs = get_fs();
set_fs(KERNEL_DS);
ret = hrtimer_nanosleep_restart(restart);
set_fs(oldfs);
if (ret) {
- restart->arg1 = (unsigned long)rmtp;
+ rmtp = restart->nanosleep.compat_rmtp;
if (rmtp && put_compat_timespec(&rmt, rmtp))
return -EFAULT;
@@ -89,7 +88,7 @@
= ¤t_thread_info()->restart_block;
restart->fn = compat_nanosleep_restart;
- restart->arg1 = (unsigned long)rmtp;
+ restart->nanosleep.compat_rmtp = rmtp;
if (rmtp && put_compat_timespec(&rmt, rmtp))
return -EFAULT;
@@ -607,9 +606,9 @@
long err;
mm_segment_t oldfs;
struct timespec tu;
- struct compat_timespec *rmtp = (struct compat_timespec *)(restart->arg1);
+ struct compat_timespec *rmtp = restart->nanosleep.compat_rmtp;
- restart->arg1 = (unsigned long) &tu;
+ restart->nanosleep.rmtp = (struct timespec __user *) &tu;
oldfs = get_fs();
set_fs(KERNEL_DS);
err = clock_nanosleep_restart(restart);
@@ -621,7 +620,7 @@
if (err == -ERESTART_RESTARTBLOCK) {
restart->fn = compat_clock_nanosleep_restart;
- restart->arg1 = (unsigned long) rmtp;
+ restart->nanosleep.compat_rmtp = rmtp;
}
return err;
}
@@ -652,7 +651,7 @@
if (err == -ERESTART_RESTARTBLOCK) {
restart = ¤t_thread_info()->restart_block;
restart->fn = compat_clock_nanosleep_restart;
- restart->arg1 = (unsigned long) rmtp;
+ restart->nanosleep.compat_rmtp = rmtp;
}
return err;
}
diff --git a/kernel/exit.c b/kernel/exit.c
index 53872bf..073005b 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1608,7 +1608,7 @@
put_pid(pid);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(5, ret, which, upid, infop, options, ru);
return ret;
}
@@ -1640,7 +1640,7 @@
put_pid(pid);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(4, ret, upid, stat_addr, options, ru);
return ret;
}
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 98bee01..c642ef7 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1354,13 +1354,13 @@
struct hrtimer_sleeper t;
struct timespec __user *rmtp;
- hrtimer_init(&t.timer, restart->arg0, HRTIMER_MODE_ABS);
- t.timer.expires.tv64 = ((u64)restart->arg3 << 32) | (u64) restart->arg2;
+ hrtimer_init(&t.timer, restart->nanosleep.index, HRTIMER_MODE_ABS);
+ t.timer.expires.tv64 = restart->nanosleep.expires;
if (do_nanosleep(&t, HRTIMER_MODE_ABS))
return 0;
- rmtp = (struct timespec __user *)restart->arg1;
+ rmtp = restart->nanosleep.rmtp;
if (rmtp) {
int ret = update_rmtp(&t.timer, rmtp);
if (ret <= 0)
@@ -1394,10 +1394,9 @@
restart = ¤t_thread_info()->restart_block;
restart->fn = hrtimer_nanosleep_restart;
- restart->arg0 = (unsigned long) t.timer.base->index;
- restart->arg1 = (unsigned long) rmtp;
- restart->arg2 = t.timer.expires.tv64 & 0xFFFFFFFF;
- restart->arg3 = t.timer.expires.tv64 >> 32;
+ restart->nanosleep.index = t.timer.base->index;
+ restart->nanosleep.rmtp = rmtp;
+ restart->nanosleep.expires = t.timer.expires.tv64;
return -ERESTART_RESTARTBLOCK;
}
@@ -1425,7 +1424,6 @@
int i;
spin_lock_init(&cpu_base->lock);
- lockdep_set_class(&cpu_base->lock, &cpu_base->lock_key);
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
cpu_base->clock_base[i].cpu_base = cpu_base;
@@ -1466,16 +1464,16 @@
tick_cancel_sched_timer(cpu);
local_irq_disable();
- double_spin_lock(&new_base->lock, &old_base->lock,
- smp_processor_id() < cpu);
+ spin_lock(&new_base->lock);
+ spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
migrate_hrtimer_list(&old_base->clock_base[i],
&new_base->clock_base[i]);
}
- double_spin_unlock(&new_base->lock, &old_base->lock,
- smp_processor_id() < cpu);
+ spin_unlock(&old_base->lock);
+ spin_unlock(&new_base->lock);
local_irq_enable();
put_cpu_var(hrtimer_bases);
}
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
new file mode 100644
index 0000000..1bd0ec1
--- /dev/null
+++ b/kernel/kgdb.c
@@ -0,0 +1,1700 @@
+/*
+ * KGDB stub.
+ *
+ * Maintainer: Jason Wessel <jason.wessel@windriver.com>
+ *
+ * Copyright (C) 2000-2001 VERITAS Software Corporation.
+ * Copyright (C) 2002-2004 Timesys Corporation
+ * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
+ * Copyright (C) 2004 Pavel Machek <pavel@suse.cz>
+ * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
+ * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
+ * Copyright (C) 2005-2008 Wind River Systems, Inc.
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
+ *
+ * Contributors at various stages not listed above:
+ * Jason Wessel ( jason.wessel@windriver.com )
+ * George Anzinger <george@mvista.com>
+ * Anurekh Saxena (anurekh.saxena@timesys.com)
+ * Lake Stevens Instrument Division (Glenn Engel)
+ * Jim Kingdon, Cygnus Support.
+ *
+ * Original KGDB stub: David Grothe <dave@gcom.com>,
+ * Tigran Aivazian <tigran@sco.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#include <linux/pid_namespace.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/console.h>
+#include <linux/threads.h>
+#include <linux/uaccess.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/reboot.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/sysrq.h>
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/pid.h>
+#include <linux/smp.h>
+#include <linux/mm.h>
+
+#include <asm/cacheflush.h>
+#include <asm/byteorder.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+static int kgdb_break_asap;
+
+struct kgdb_state {
+ int ex_vector;
+ int signo;
+ int err_code;
+ int cpu;
+ int pass_exception;
+ long threadid;
+ long kgdb_usethreadid;
+ struct pt_regs *linux_regs;
+};
+
+static struct debuggerinfo_struct {
+ void *debuggerinfo;
+ struct task_struct *task;
+} kgdb_info[NR_CPUS];
+
+/**
+ * kgdb_connected - Is a host GDB connected to us?
+ */
+int kgdb_connected;
+EXPORT_SYMBOL_GPL(kgdb_connected);
+
+/* All the KGDB handlers are installed */
+static int kgdb_io_module_registered;
+
+/* Guard for recursive entry */
+static int exception_level;
+
+static struct kgdb_io *kgdb_io_ops;
+static DEFINE_SPINLOCK(kgdb_registration_lock);
+
+/* kgdb console driver is loaded */
+static int kgdb_con_registered;
+/* determine if kgdb console output should be used */
+static int kgdb_use_con;
+
+static int __init opt_kgdb_con(char *str)
+{
+ kgdb_use_con = 1;
+ return 0;
+}
+
+early_param("kgdbcon", opt_kgdb_con);
+
+module_param(kgdb_use_con, int, 0644);
+
+/*
+ * Holds information about breakpoints in a kernel. These breakpoints are
+ * added and removed by gdb.
+ */
+static struct kgdb_bkpt kgdb_break[KGDB_MAX_BREAKPOINTS] = {
+ [0 ... KGDB_MAX_BREAKPOINTS-1] = { .state = BP_UNDEFINED }
+};
+
+/*
+ * The CPU# of the active CPU, or -1 if none:
+ */
+atomic_t kgdb_active = ATOMIC_INIT(-1);
+
+/*
+ * We use NR_CPUs not PERCPU, in case kgdb is used to debug early
+ * bootup code (which might not have percpu set up yet):
+ */
+static atomic_t passive_cpu_wait[NR_CPUS];
+static atomic_t cpu_in_kgdb[NR_CPUS];
+atomic_t kgdb_setting_breakpoint;
+
+struct task_struct *kgdb_usethread;
+struct task_struct *kgdb_contthread;
+
+int kgdb_single_step;
+
+/* Our I/O buffers. */
+static char remcom_in_buffer[BUFMAX];
+static char remcom_out_buffer[BUFMAX];
+
+/* Storage for the registers, in GDB format. */
+static unsigned long gdb_regs[(NUMREGBYTES +
+ sizeof(unsigned long) - 1) /
+ sizeof(unsigned long)];
+
+/* to keep track of the CPU which is doing the single stepping*/
+atomic_t kgdb_cpu_doing_single_step = ATOMIC_INIT(-1);
+
+/*
+ * If you are debugging a problem where roundup (the collection of
+ * all other CPUs) is a problem [this should be extremely rare],
+ * then use the nokgdbroundup option to avoid roundup. In that case
+ * the other CPUs might interfere with your debugging context, so
+ * use this with care:
+ */
+int kgdb_do_roundup = 1;
+
+static int __init opt_nokgdbroundup(char *str)
+{
+ kgdb_do_roundup = 0;
+
+ return 0;
+}
+
+early_param("nokgdbroundup", opt_nokgdbroundup);
+
+/*
+ * Finally, some KGDB code :-)
+ */
+
+/*
+ * Weak aliases for breakpoint management,
+ * can be overriden by architectures when needed:
+ */
+int __weak kgdb_validate_break_address(unsigned long addr)
+{
+ char tmp_variable[BREAK_INSTR_SIZE];
+
+ return probe_kernel_read(tmp_variable, (char *)addr, BREAK_INSTR_SIZE);
+}
+
+int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr)
+{
+ int err;
+
+ err = probe_kernel_read(saved_instr, (char *)addr, BREAK_INSTR_SIZE);
+ if (err)
+ return err;
+
+ return probe_kernel_write((char *)addr, arch_kgdb_ops.gdb_bpt_instr,
+ BREAK_INSTR_SIZE);
+}
+
+int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle)
+{
+ return probe_kernel_write((char *)addr,
+ (char *)bundle, BREAK_INSTR_SIZE);
+}
+
+unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs)
+{
+ return instruction_pointer(regs);
+}
+
+int __weak kgdb_arch_init(void)
+{
+ return 0;
+}
+
+int __weak kgdb_skipexception(int exception, struct pt_regs *regs)
+{
+ return 0;
+}
+
+void __weak
+kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code)
+{
+ return;
+}
+
+/**
+ * kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb.
+ * @regs: Current &struct pt_regs.
+ *
+ * This function will be called if the particular architecture must
+ * disable hardware debugging while it is processing gdb packets or
+ * handling exception.
+ */
+void __weak kgdb_disable_hw_debug(struct pt_regs *regs)
+{
+}
+
+/*
+ * GDB remote protocol parser:
+ */
+
+static const char hexchars[] = "0123456789abcdef";
+
+static int hex(char ch)
+{
+ if ((ch >= 'a') && (ch <= 'f'))
+ return ch - 'a' + 10;
+ if ((ch >= '0') && (ch <= '9'))
+ return ch - '0';
+ if ((ch >= 'A') && (ch <= 'F'))
+ return ch - 'A' + 10;
+ return -1;
+}
+
+/* scan for the sequence $<data>#<checksum> */
+static void get_packet(char *buffer)
+{
+ unsigned char checksum;
+ unsigned char xmitcsum;
+ int count;
+ char ch;
+
+ do {
+ /*
+ * Spin and wait around for the start character, ignore all
+ * other characters:
+ */
+ while ((ch = (kgdb_io_ops->read_char())) != '$')
+ /* nothing */;
+
+ kgdb_connected = 1;
+ checksum = 0;
+ xmitcsum = -1;
+
+ count = 0;
+
+ /*
+ * now, read until a # or end of buffer is found:
+ */
+ while (count < (BUFMAX - 1)) {
+ ch = kgdb_io_ops->read_char();
+ if (ch == '#')
+ break;
+ checksum = checksum + ch;
+ buffer[count] = ch;
+ count = count + 1;
+ }
+ buffer[count] = 0;
+
+ if (ch == '#') {
+ xmitcsum = hex(kgdb_io_ops->read_char()) << 4;
+ xmitcsum += hex(kgdb_io_ops->read_char());
+
+ if (checksum != xmitcsum)
+ /* failed checksum */
+ kgdb_io_ops->write_char('-');
+ else
+ /* successful transfer */
+ kgdb_io_ops->write_char('+');
+ if (kgdb_io_ops->flush)
+ kgdb_io_ops->flush();
+ }
+ } while (checksum != xmitcsum);
+}
+
+/*
+ * Send the packet in buffer.
+ * Check for gdb connection if asked for.
+ */
+static void put_packet(char *buffer)
+{
+ unsigned char checksum;
+ int count;
+ char ch;
+
+ /*
+ * $<packet info>#<checksum>.
+ */
+ while (1) {
+ kgdb_io_ops->write_char('$');
+ checksum = 0;
+ count = 0;
+
+ while ((ch = buffer[count])) {
+ kgdb_io_ops->write_char(ch);
+ checksum += ch;
+ count++;
+ }
+
+ kgdb_io_ops->write_char('#');
+ kgdb_io_ops->write_char(hexchars[checksum >> 4]);
+ kgdb_io_ops->write_char(hexchars[checksum & 0xf]);
+ if (kgdb_io_ops->flush)
+ kgdb_io_ops->flush();
+
+ /* Now see what we get in reply. */
+ ch = kgdb_io_ops->read_char();
+
+ if (ch == 3)
+ ch = kgdb_io_ops->read_char();
+
+ /* If we get an ACK, we are done. */
+ if (ch == '+')
+ return;
+
+ /*
+ * If we get the start of another packet, this means
+ * that GDB is attempting to reconnect. We will NAK
+ * the packet being sent, and stop trying to send this
+ * packet.
+ */
+ if (ch == '$') {
+ kgdb_io_ops->write_char('-');
+ if (kgdb_io_ops->flush)
+ kgdb_io_ops->flush();
+ return;
+ }
+ }
+}
+
+static char *pack_hex_byte(char *pkt, u8 byte)
+{
+ *pkt++ = hexchars[byte >> 4];
+ *pkt++ = hexchars[byte & 0xf];
+
+ return pkt;
+}
+
+/*
+ * Convert the memory pointed to by mem into hex, placing result in buf.
+ * Return a pointer to the last char put in buf (null). May return an error.
+ */
+int kgdb_mem2hex(char *mem, char *buf, int count)
+{
+ char *tmp;
+ int err;
+
+ /*
+ * We use the upper half of buf as an intermediate buffer for the
+ * raw memory copy. Hex conversion will work against this one.
+ */
+ tmp = buf + count;
+
+ err = probe_kernel_read(tmp, mem, count);
+ if (!err) {
+ while (count > 0) {
+ buf = pack_hex_byte(buf, *tmp);
+ tmp++;
+ count--;
+ }
+
+ *buf = 0;
+ }
+
+ return err;
+}
+
+/*
+ * Copy the binary array pointed to by buf into mem. Fix $, #, and
+ * 0x7d escaped with 0x7d. Return a pointer to the character after
+ * the last byte written.
+ */
+static int kgdb_ebin2mem(char *buf, char *mem, int count)
+{
+ int err = 0;
+ char c;
+
+ while (count-- > 0) {
+ c = *buf++;
+ if (c == 0x7d)
+ c = *buf++ ^ 0x20;
+
+ err = probe_kernel_write(mem, &c, 1);
+ if (err)
+ break;
+
+ mem++;
+ }
+
+ return err;
+}
+
+/*
+ * Convert the hex array pointed to by buf into binary to be placed in mem.
+ * Return a pointer to the character AFTER the last byte written.
+ * May return an error.
+ */
+int kgdb_hex2mem(char *buf, char *mem, int count)
+{
+ char *tmp_raw;
+ char *tmp_hex;
+
+ /*
+ * We use the upper half of buf as an intermediate buffer for the
+ * raw memory that is converted from hex.
+ */
+ tmp_raw = buf + count * 2;
+
+ tmp_hex = tmp_raw - 1;
+ while (tmp_hex >= buf) {
+ tmp_raw--;
+ *tmp_raw = hex(*tmp_hex--);
+ *tmp_raw |= hex(*tmp_hex--) << 4;
+ }
+
+ return probe_kernel_write(mem, tmp_raw, count);
+}
+
+/*
+ * While we find nice hex chars, build a long_val.
+ * Return number of chars processed.
+ */
+int kgdb_hex2long(char **ptr, long *long_val)
+{
+ int hex_val;
+ int num = 0;
+
+ *long_val = 0;
+
+ while (**ptr) {
+ hex_val = hex(**ptr);
+ if (hex_val < 0)
+ break;
+
+ *long_val = (*long_val << 4) | hex_val;
+ num++;
+ (*ptr)++;
+ }
+
+ return num;
+}
+
+/* Write memory due to an 'M' or 'X' packet. */
+static int write_mem_msg(int binary)
+{
+ char *ptr = &remcom_in_buffer[1];
+ unsigned long addr;
+ unsigned long length;
+ int err;
+
+ if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
+ kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
+ if (binary)
+ err = kgdb_ebin2mem(ptr, (char *)addr, length);
+ else
+ err = kgdb_hex2mem(ptr, (char *)addr, length);
+ if (err)
+ return err;
+ if (CACHE_FLUSH_IS_SAFE)
+ flush_icache_range(addr, addr + length + 1);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static void error_packet(char *pkt, int error)
+{
+ error = -error;
+ pkt[0] = 'E';
+ pkt[1] = hexchars[(error / 10)];
+ pkt[2] = hexchars[(error % 10)];
+ pkt[3] = '\0';
+}
+
+/*
+ * Thread ID accessors. We represent a flat TID space to GDB, where
+ * the per CPU idle threads (which under Linux all have PID 0) are
+ * remapped to negative TIDs.
+ */
+
+#define BUF_THREAD_ID_SIZE 16
+
+static char *pack_threadid(char *pkt, unsigned char *id)
+{
+ char *limit;
+
+ limit = pkt + BUF_THREAD_ID_SIZE;
+ while (pkt < limit)
+ pkt = pack_hex_byte(pkt, *id++);
+
+ return pkt;
+}
+
+static void int_to_threadref(unsigned char *id, int value)
+{
+ unsigned char *scan;
+ int i = 4;
+
+ scan = (unsigned char *)id;
+ while (i--)
+ *scan++ = 0;
+ *scan++ = (value >> 24) & 0xff;
+ *scan++ = (value >> 16) & 0xff;
+ *scan++ = (value >> 8) & 0xff;
+ *scan++ = (value & 0xff);
+}
+
+static struct task_struct *getthread(struct pt_regs *regs, int tid)
+{
+ /*
+ * Non-positive TIDs are remapped idle tasks:
+ */
+ if (tid <= 0)
+ return idle_task(-tid);
+
+ /*
+ * find_task_by_pid_ns() does not take the tasklist lock anymore
+ * but is nicely RCU locked - hence is a pretty resilient
+ * thing to use:
+ */
+ return find_task_by_pid_ns(tid, &init_pid_ns);
+}
+
+/*
+ * CPU debug state control:
+ */
+
+#ifdef CONFIG_SMP
+static void kgdb_wait(struct pt_regs *regs)
+{
+ unsigned long flags;
+ int cpu;
+
+ local_irq_save(flags);
+ cpu = raw_smp_processor_id();
+ kgdb_info[cpu].debuggerinfo = regs;
+ kgdb_info[cpu].task = current;
+ /*
+ * Make sure the above info reaches the primary CPU before
+ * our cpu_in_kgdb[] flag setting does:
+ */
+ smp_wmb();
+ atomic_set(&cpu_in_kgdb[cpu], 1);
+
+ /* Wait till primary CPU is done with debugging */
+ while (atomic_read(&passive_cpu_wait[cpu]))
+ cpu_relax();
+
+ kgdb_info[cpu].debuggerinfo = NULL;
+ kgdb_info[cpu].task = NULL;
+
+ /* fix up hardware debug registers on local cpu */
+ if (arch_kgdb_ops.correct_hw_break)
+ arch_kgdb_ops.correct_hw_break();
+
+ /* Signal the primary CPU that we are done: */
+ atomic_set(&cpu_in_kgdb[cpu], 0);
+ clocksource_touch_watchdog();
+ local_irq_restore(flags);
+}
+#endif
+
+/*
+ * Some architectures need cache flushes when we set/clear a
+ * breakpoint:
+ */
+static void kgdb_flush_swbreak_addr(unsigned long addr)
+{
+ if (!CACHE_FLUSH_IS_SAFE)
+ return;
+
+ if (current->mm && current->mm->mmap_cache) {
+ flush_cache_range(current->mm->mmap_cache,
+ addr, addr + BREAK_INSTR_SIZE);
+ }
+ /* Force flush instruction cache if it was outside the mm */
+ flush_icache_range(addr, addr + BREAK_INSTR_SIZE);
+}
+
+/*
+ * SW breakpoint management:
+ */
+static int kgdb_activate_sw_breakpoints(void)
+{
+ unsigned long addr;
+ int error = 0;
+ int i;
+
+ for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+ if (kgdb_break[i].state != BP_SET)
+ continue;
+
+ addr = kgdb_break[i].bpt_addr;
+ error = kgdb_arch_set_breakpoint(addr,
+ kgdb_break[i].saved_instr);
+ if (error)
+ return error;
+
+ kgdb_flush_swbreak_addr(addr);
+ kgdb_break[i].state = BP_ACTIVE;
+ }
+ return 0;
+}
+
+static int kgdb_set_sw_break(unsigned long addr)
+{
+ int err = kgdb_validate_break_address(addr);
+ int breakno = -1;
+ int i;
+
+ if (err)
+ return err;
+
+ for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+ if ((kgdb_break[i].state == BP_SET) &&
+ (kgdb_break[i].bpt_addr == addr))
+ return -EEXIST;
+ }
+ for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+ if (kgdb_break[i].state == BP_REMOVED &&
+ kgdb_break[i].bpt_addr == addr) {
+ breakno = i;
+ break;
+ }
+ }
+
+ if (breakno == -1) {
+ for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+ if (kgdb_break[i].state == BP_UNDEFINED) {
+ breakno = i;
+ break;
+ }
+ }
+ }
+
+ if (breakno == -1)
+ return -E2BIG;
+
+ kgdb_break[breakno].state = BP_SET;
+ kgdb_break[breakno].type = BP_BREAKPOINT;
+ kgdb_break[breakno].bpt_addr = addr;
+
+ return 0;
+}
+
+static int kgdb_deactivate_sw_breakpoints(void)
+{
+ unsigned long addr;
+ int error = 0;
+ int i;
+
+ for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+ if (kgdb_break[i].state != BP_ACTIVE)
+ continue;
+ addr = kgdb_break[i].bpt_addr;
+ error = kgdb_arch_remove_breakpoint(addr,
+ kgdb_break[i].saved_instr);
+ if (error)
+ return error;
+
+ kgdb_flush_swbreak_addr(addr);
+ kgdb_break[i].state = BP_SET;
+ }
+ return 0;
+}
+
+static int kgdb_remove_sw_break(unsigned long addr)
+{
+ int i;
+
+ for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+ if ((kgdb_break[i].state == BP_SET) &&
+ (kgdb_break[i].bpt_addr == addr)) {
+ kgdb_break[i].state = BP_REMOVED;
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+
+int kgdb_isremovedbreak(unsigned long addr)
+{
+ int i;
+
+ for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+ if ((kgdb_break[i].state == BP_REMOVED) &&
+ (kgdb_break[i].bpt_addr == addr))
+ return 1;
+ }
+ return 0;
+}
+
+int remove_all_break(void)
+{
+ unsigned long addr;
+ int error;
+ int i;
+
+ /* Clear memory breakpoints. */
+ for (i = 0; i < KGDB_MAX_BREAKPOINTS; i++) {
+ if (kgdb_break[i].state != BP_ACTIVE)
+ goto setundefined;
+ addr = kgdb_break[i].bpt_addr;
+ error = kgdb_arch_remove_breakpoint(addr,
+ kgdb_break[i].saved_instr);
+ if (error)
+ printk(KERN_ERR "KGDB: breakpoint remove failed: %lx\n",
+ addr);
+setundefined:
+ kgdb_break[i].state = BP_UNDEFINED;
+ }
+
+ /* Clear hardware breakpoints. */
+ if (arch_kgdb_ops.remove_all_hw_break)
+ arch_kgdb_ops.remove_all_hw_break();
+
+ return 0;
+}
+
+/*
+ * Remap normal tasks to their real PID, idle tasks to -1 ... -NR_CPUs:
+ */
+static inline int shadow_pid(int realpid)
+{
+ if (realpid)
+ return realpid;
+
+ return -1-raw_smp_processor_id();
+}
+
+static char gdbmsgbuf[BUFMAX + 1];
+
+static void kgdb_msg_write(const char *s, int len)
+{
+ char *bufptr;
+ int wcount;
+ int i;
+
+ /* 'O'utput */
+ gdbmsgbuf[0] = 'O';
+
+ /* Fill and send buffers... */
+ while (len > 0) {
+ bufptr = gdbmsgbuf + 1;
+
+ /* Calculate how many this time */
+ if ((len << 1) > (BUFMAX - 2))
+ wcount = (BUFMAX - 2) >> 1;
+ else
+ wcount = len;
+
+ /* Pack in hex chars */
+ for (i = 0; i < wcount; i++)
+ bufptr = pack_hex_byte(bufptr, s[i]);
+ *bufptr = '\0';
+
+ /* Move up */
+ s += wcount;
+ len -= wcount;
+
+ /* Write packet */
+ put_packet(gdbmsgbuf);
+ }
+}
+
+/*
+ * Return true if there is a valid kgdb I/O module. Also if no
+ * debugger is attached a message can be printed to the console about
+ * waiting for the debugger to attach.
+ *
+ * The print_wait argument is only to be true when called from inside
+ * the core kgdb_handle_exception, because it will wait for the
+ * debugger to attach.
+ */
+static int kgdb_io_ready(int print_wait)
+{
+ if (!kgdb_io_ops)
+ return 0;
+ if (kgdb_connected)
+ return 1;
+ if (atomic_read(&kgdb_setting_breakpoint))
+ return 1;
+ if (print_wait)
+ printk(KERN_CRIT "KGDB: Waiting for remote debugger\n");
+ return 1;
+}
+
+/*
+ * All the functions that start with gdb_cmd are the various
+ * operations to implement the handlers for the gdbserial protocol
+ * where KGDB is communicating with an external debugger
+ */
+
+/* Handle the '?' status packets */
+static void gdb_cmd_status(struct kgdb_state *ks)
+{
+ /*
+ * We know that this packet is only sent
+ * during initial connect. So to be safe,
+ * we clear out our breakpoints now in case
+ * GDB is reconnecting.
+ */
+ remove_all_break();
+
+ remcom_out_buffer[0] = 'S';
+ pack_hex_byte(&remcom_out_buffer[1], ks->signo);
+}
+
+/* Handle the 'g' get registers request */
+static void gdb_cmd_getregs(struct kgdb_state *ks)
+{
+ struct task_struct *thread;
+ void *local_debuggerinfo;
+ int i;
+
+ thread = kgdb_usethread;
+ if (!thread) {
+ thread = kgdb_info[ks->cpu].task;
+ local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
+ } else {
+ local_debuggerinfo = NULL;
+ for (i = 0; i < NR_CPUS; i++) {
+ /*
+ * Try to find the task on some other
+ * or possibly this node if we do not
+ * find the matching task then we try
+ * to approximate the results.
+ */
+ if (thread == kgdb_info[i].task)
+ local_debuggerinfo = kgdb_info[i].debuggerinfo;
+ }
+ }
+
+ /*
+ * All threads that don't have debuggerinfo should be
+ * in __schedule() sleeping, since all other CPUs
+ * are in kgdb_wait, and thus have debuggerinfo.
+ */
+ if (local_debuggerinfo) {
+ pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
+ } else {
+ /*
+ * Pull stuff saved during switch_to; nothing
+ * else is accessible (or even particularly
+ * relevant).
+ *
+ * This should be enough for a stack trace.
+ */
+ sleeping_thread_to_gdb_regs(gdb_regs, thread);
+ }
+ kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
+}
+
+/* Handle the 'G' set registers request */
+static void gdb_cmd_setregs(struct kgdb_state *ks)
+{
+ kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
+
+ if (kgdb_usethread && kgdb_usethread != current) {
+ error_packet(remcom_out_buffer, -EINVAL);
+ } else {
+ gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
+ strcpy(remcom_out_buffer, "OK");
+ }
+}
+
+/* Handle the 'm' memory read bytes */
+static void gdb_cmd_memread(struct kgdb_state *ks)
+{
+ char *ptr = &remcom_in_buffer[1];
+ unsigned long length;
+ unsigned long addr;
+ int err;
+
+ if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
+ kgdb_hex2long(&ptr, &length) > 0) {
+ err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
+ if (err)
+ error_packet(remcom_out_buffer, err);
+ } else {
+ error_packet(remcom_out_buffer, -EINVAL);
+ }
+}
+
+/* Handle the 'M' memory write bytes */
+static void gdb_cmd_memwrite(struct kgdb_state *ks)
+{
+ int err = write_mem_msg(0);
+
+ if (err)
+ error_packet(remcom_out_buffer, err);
+ else
+ strcpy(remcom_out_buffer, "OK");
+}
+
+/* Handle the 'X' memory binary write bytes */
+static void gdb_cmd_binwrite(struct kgdb_state *ks)
+{
+ int err = write_mem_msg(1);
+
+ if (err)
+ error_packet(remcom_out_buffer, err);
+ else
+ strcpy(remcom_out_buffer, "OK");
+}
+
+/* Handle the 'D' or 'k', detach or kill packets */
+static void gdb_cmd_detachkill(struct kgdb_state *ks)
+{
+ int error;
+
+ /* The detach case */
+ if (remcom_in_buffer[0] == 'D') {
+ error = remove_all_break();
+ if (error < 0) {
+ error_packet(remcom_out_buffer, error);
+ } else {
+ strcpy(remcom_out_buffer, "OK");
+ kgdb_connected = 0;
+ }
+ put_packet(remcom_out_buffer);
+ } else {
+ /*
+ * Assume the kill case, with no exit code checking,
+ * trying to force detach the debugger:
+ */
+ remove_all_break();
+ kgdb_connected = 0;
+ }
+}
+
+/* Handle the 'R' reboot packets */
+static int gdb_cmd_reboot(struct kgdb_state *ks)
+{
+ /* For now, only honor R0 */
+ if (strcmp(remcom_in_buffer, "R0") == 0) {
+ printk(KERN_CRIT "Executing emergency reboot\n");
+ strcpy(remcom_out_buffer, "OK");
+ put_packet(remcom_out_buffer);
+
+ /*
+ * Execution should not return from
+ * machine_emergency_restart()
+ */
+ machine_emergency_restart();
+ kgdb_connected = 0;
+
+ return 1;
+ }
+ return 0;
+}
+
+/* Handle the 'q' query packets */
+static void gdb_cmd_query(struct kgdb_state *ks)
+{
+ struct task_struct *thread;
+ unsigned char thref[8];
+ char *ptr;
+ int i;
+
+ switch (remcom_in_buffer[1]) {
+ case 's':
+ case 'f':
+ if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) {
+ error_packet(remcom_out_buffer, -EINVAL);
+ break;
+ }
+
+ if (remcom_in_buffer[1] == 'f')
+ ks->threadid = 1;
+
+ remcom_out_buffer[0] = 'm';
+ ptr = remcom_out_buffer + 1;
+
+ for (i = 0; i < 17; ks->threadid++) {
+ thread = getthread(ks->linux_regs, ks->threadid);
+ if (thread) {
+ int_to_threadref(thref, ks->threadid);
+ pack_threadid(ptr, thref);
+ ptr += BUF_THREAD_ID_SIZE;
+ *(ptr++) = ',';
+ i++;
+ }
+ }
+ *(--ptr) = '\0';
+ break;
+
+ case 'C':
+ /* Current thread id */
+ strcpy(remcom_out_buffer, "QC");
+ ks->threadid = shadow_pid(current->pid);
+ int_to_threadref(thref, ks->threadid);
+ pack_threadid(remcom_out_buffer + 2, thref);
+ break;
+ case 'T':
+ if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) {
+ error_packet(remcom_out_buffer, -EINVAL);
+ break;
+ }
+ ks->threadid = 0;
+ ptr = remcom_in_buffer + 17;
+ kgdb_hex2long(&ptr, &ks->threadid);
+ if (!getthread(ks->linux_regs, ks->threadid)) {
+ error_packet(remcom_out_buffer, -EINVAL);
+ break;
+ }
+ if (ks->threadid > 0) {
+ kgdb_mem2hex(getthread(ks->linux_regs,
+ ks->threadid)->comm,
+ remcom_out_buffer, 16);
+ } else {
+ static char tmpstr[23 + BUF_THREAD_ID_SIZE];
+
+ sprintf(tmpstr, "Shadow task %d for pid 0",
+ (int)(-ks->threadid-1));
+ kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
+ }
+ break;
+ }
+}
+
+/* Handle the 'H' task query packets */
+static void gdb_cmd_task(struct kgdb_state *ks)
+{
+ struct task_struct *thread;
+ char *ptr;
+
+ switch (remcom_in_buffer[1]) {
+ case 'g':
+ ptr = &remcom_in_buffer[2];
+ kgdb_hex2long(&ptr, &ks->threadid);
+ thread = getthread(ks->linux_regs, ks->threadid);
+ if (!thread && ks->threadid > 0) {
+ error_packet(remcom_out_buffer, -EINVAL);
+ break;
+ }
+ kgdb_usethread = thread;
+ ks->kgdb_usethreadid = ks->threadid;
+ strcpy(remcom_out_buffer, "OK");
+ break;
+ case 'c':
+ ptr = &remcom_in_buffer[2];
+ kgdb_hex2long(&ptr, &ks->threadid);
+ if (!ks->threadid) {
+ kgdb_contthread = NULL;
+ } else {
+ thread = getthread(ks->linux_regs, ks->threadid);
+ if (!thread && ks->threadid > 0) {
+ error_packet(remcom_out_buffer, -EINVAL);
+ break;
+ }
+ kgdb_contthread = thread;
+ }
+ strcpy(remcom_out_buffer, "OK");
+ break;
+ }
+}
+
+/* Handle the 'T' thread query packets */
+static void gdb_cmd_thread(struct kgdb_state *ks)
+{
+ char *ptr = &remcom_in_buffer[1];
+ struct task_struct *thread;
+
+ kgdb_hex2long(&ptr, &ks->threadid);
+ thread = getthread(ks->linux_regs, ks->threadid);
+ if (thread)
+ strcpy(remcom_out_buffer, "OK");
+ else
+ error_packet(remcom_out_buffer, -EINVAL);
+}
+
+/* Handle the 'z' or 'Z' breakpoint remove or set packets */
+static void gdb_cmd_break(struct kgdb_state *ks)
+{
+ /*
+ * Since GDB-5.3, it's been drafted that '0' is a software
+ * breakpoint, '1' is a hardware breakpoint, so let's do that.
+ */
+ char *bpt_type = &remcom_in_buffer[1];
+ char *ptr = &remcom_in_buffer[2];
+ unsigned long addr;
+ unsigned long length;
+ int error = 0;
+
+ if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
+ /* Unsupported */
+ if (*bpt_type > '4')
+ return;
+ } else {
+ if (*bpt_type != '0' && *bpt_type != '1')
+ /* Unsupported. */
+ return;
+ }
+
+ /*
+ * Test if this is a hardware breakpoint, and
+ * if we support it:
+ */
+ if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
+ /* Unsupported. */
+ return;
+
+ if (*(ptr++) != ',') {
+ error_packet(remcom_out_buffer, -EINVAL);
+ return;
+ }
+ if (!kgdb_hex2long(&ptr, &addr)) {
+ error_packet(remcom_out_buffer, -EINVAL);
+ return;
+ }
+ if (*(ptr++) != ',' ||
+ !kgdb_hex2long(&ptr, &length)) {
+ error_packet(remcom_out_buffer, -EINVAL);
+ return;
+ }
+
+ if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
+ error = kgdb_set_sw_break(addr);
+ else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
+ error = kgdb_remove_sw_break(addr);
+ else if (remcom_in_buffer[0] == 'Z')
+ error = arch_kgdb_ops.set_hw_breakpoint(addr,
+ (int)length, *bpt_type - '0');
+ else if (remcom_in_buffer[0] == 'z')
+ error = arch_kgdb_ops.remove_hw_breakpoint(addr,
+ (int) length, *bpt_type - '0');
+
+ if (error == 0)
+ strcpy(remcom_out_buffer, "OK");
+ else
+ error_packet(remcom_out_buffer, error);
+}
+
+/* Handle the 'C' signal / exception passing packets */
+static int gdb_cmd_exception_pass(struct kgdb_state *ks)
+{
+ /* C09 == pass exception
+ * C15 == detach kgdb, pass exception
+ */
+ if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
+
+ ks->pass_exception = 1;
+ remcom_in_buffer[0] = 'c';
+
+ } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
+
+ ks->pass_exception = 1;
+ remcom_in_buffer[0] = 'D';
+ remove_all_break();
+ kgdb_connected = 0;
+ return 1;
+
+ } else {
+ error_packet(remcom_out_buffer, -EINVAL);
+ return 0;
+ }
+
+ /* Indicate fall through */
+ return -1;
+}
+
+/*
+ * This function performs all gdbserial command procesing
+ */
+static int gdb_serial_stub(struct kgdb_state *ks)
+{
+ int error = 0;
+ int tmp;
+
+ /* Clear the out buffer. */
+ memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
+
+ if (kgdb_connected) {
+ unsigned char thref[8];
+ char *ptr;
+
+ /* Reply to host that an exception has occurred */
+ ptr = remcom_out_buffer;
+ *ptr++ = 'T';
+ ptr = pack_hex_byte(ptr, ks->signo);
+ ptr += strlen(strcpy(ptr, "thread:"));
+ int_to_threadref(thref, shadow_pid(current->pid));
+ ptr = pack_threadid(ptr, thref);
+ *ptr++ = ';';
+ put_packet(remcom_out_buffer);
+ }
+
+ kgdb_usethread = kgdb_info[ks->cpu].task;
+ ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
+ ks->pass_exception = 0;
+
+ while (1) {
+ error = 0;
+
+ /* Clear the out buffer. */
+ memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
+
+ get_packet(remcom_in_buffer);
+
+ switch (remcom_in_buffer[0]) {
+ case '?': /* gdbserial status */
+ gdb_cmd_status(ks);
+ break;
+ case 'g': /* return the value of the CPU registers */
+ gdb_cmd_getregs(ks);
+ break;
+ case 'G': /* set the value of the CPU registers - return OK */
+ gdb_cmd_setregs(ks);
+ break;
+ case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
+ gdb_cmd_memread(ks);
+ break;
+ case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
+ gdb_cmd_memwrite(ks);
+ break;
+ case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
+ gdb_cmd_binwrite(ks);
+ break;
+ /* kill or detach. KGDB should treat this like a
+ * continue.
+ */
+ case 'D': /* Debugger detach */
+ case 'k': /* Debugger detach via kill */
+ gdb_cmd_detachkill(ks);
+ goto default_handle;
+ case 'R': /* Reboot */
+ if (gdb_cmd_reboot(ks))
+ goto default_handle;
+ break;
+ case 'q': /* query command */
+ gdb_cmd_query(ks);
+ break;
+ case 'H': /* task related */
+ gdb_cmd_task(ks);
+ break;
+ case 'T': /* Query thread status */
+ gdb_cmd_thread(ks);
+ break;
+ case 'z': /* Break point remove */
+ case 'Z': /* Break point set */
+ gdb_cmd_break(ks);
+ break;
+ case 'C': /* Exception passing */
+ tmp = gdb_cmd_exception_pass(ks);
+ if (tmp > 0)
+ goto default_handle;
+ if (tmp == 0)
+ break;
+ /* Fall through on tmp < 0 */
+ case 'c': /* Continue packet */
+ case 's': /* Single step packet */
+ if (kgdb_contthread && kgdb_contthread != current) {
+ /* Can't switch threads in kgdb */
+ error_packet(remcom_out_buffer, -EINVAL);
+ break;
+ }
+ kgdb_activate_sw_breakpoints();
+ /* Fall through to default processing */
+ default:
+default_handle:
+ error = kgdb_arch_handle_exception(ks->ex_vector,
+ ks->signo,
+ ks->err_code,
+ remcom_in_buffer,
+ remcom_out_buffer,
+ ks->linux_regs);
+ /*
+ * Leave cmd processing on error, detach,
+ * kill, continue, or single step.
+ */
+ if (error >= 0 || remcom_in_buffer[0] == 'D' ||
+ remcom_in_buffer[0] == 'k') {
+ error = 0;
+ goto kgdb_exit;
+ }
+
+ }
+
+ /* reply to the request */
+ put_packet(remcom_out_buffer);
+ }
+
+kgdb_exit:
+ if (ks->pass_exception)
+ error = 1;
+ return error;
+}
+
+static int kgdb_reenter_check(struct kgdb_state *ks)
+{
+ unsigned long addr;
+
+ if (atomic_read(&kgdb_active) != raw_smp_processor_id())
+ return 0;
+
+ /* Panic on recursive debugger calls: */
+ exception_level++;
+ addr = kgdb_arch_pc(ks->ex_vector, ks->linux_regs);
+ kgdb_deactivate_sw_breakpoints();
+
+ /*
+ * If the break point removed ok at the place exception
+ * occurred, try to recover and print a warning to the end
+ * user because the user planted a breakpoint in a place that
+ * KGDB needs in order to function.
+ */
+ if (kgdb_remove_sw_break(addr) == 0) {
+ exception_level = 0;
+ kgdb_skipexception(ks->ex_vector, ks->linux_regs);
+ kgdb_activate_sw_breakpoints();
+ printk(KERN_CRIT "KGDB: re-enter error: breakpoint removed %lx\n",
+ addr);
+ WARN_ON_ONCE(1);
+
+ return 1;
+ }
+ remove_all_break();
+ kgdb_skipexception(ks->ex_vector, ks->linux_regs);
+
+ if (exception_level > 1) {
+ dump_stack();
+ panic("Recursive entry to debugger");
+ }
+
+ printk(KERN_CRIT "KGDB: re-enter exception: ALL breakpoints killed\n");
+ dump_stack();
+ panic("Recursive entry to debugger");
+
+ return 1;
+}
+
+/*
+ * kgdb_handle_exception() - main entry point from a kernel exception
+ *
+ * Locking hierarchy:
+ * interface locks, if any (begin_session)
+ * kgdb lock (kgdb_active)
+ */
+int
+kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs)
+{
+ struct kgdb_state kgdb_var;
+ struct kgdb_state *ks = &kgdb_var;
+ unsigned long flags;
+ int error = 0;
+ int i, cpu;
+
+ ks->cpu = raw_smp_processor_id();
+ ks->ex_vector = evector;
+ ks->signo = signo;
+ ks->ex_vector = evector;
+ ks->err_code = ecode;
+ ks->kgdb_usethreadid = 0;
+ ks->linux_regs = regs;
+
+ if (kgdb_reenter_check(ks))
+ return 0; /* Ouch, double exception ! */
+
+acquirelock:
+ /*
+ * Interrupts will be restored by the 'trap return' code, except when
+ * single stepping.
+ */
+ local_irq_save(flags);
+
+ cpu = raw_smp_processor_id();
+
+ /*
+ * Acquire the kgdb_active lock:
+ */
+ while (atomic_cmpxchg(&kgdb_active, -1, cpu) != -1)
+ cpu_relax();
+
+ /*
+ * Do not start the debugger connection on this CPU if the last
+ * instance of the exception handler wanted to come into the
+ * debugger on a different CPU via a single step
+ */
+ if (atomic_read(&kgdb_cpu_doing_single_step) != -1 &&
+ atomic_read(&kgdb_cpu_doing_single_step) != cpu) {
+
+ atomic_set(&kgdb_active, -1);
+ clocksource_touch_watchdog();
+ local_irq_restore(flags);
+
+ goto acquirelock;
+ }
+
+ if (!kgdb_io_ready(1)) {
+ error = 1;
+ goto kgdb_restore; /* No I/O connection, so resume the system */
+ }
+
+ /*
+ * Don't enter if we have hit a removed breakpoint.
+ */
+ if (kgdb_skipexception(ks->ex_vector, ks->linux_regs))
+ goto kgdb_restore;
+
+ /* Call the I/O driver's pre_exception routine */
+ if (kgdb_io_ops->pre_exception)
+ kgdb_io_ops->pre_exception();
+
+ kgdb_info[ks->cpu].debuggerinfo = ks->linux_regs;
+ kgdb_info[ks->cpu].task = current;
+
+ kgdb_disable_hw_debug(ks->linux_regs);
+
+ /*
+ * Get the passive CPU lock which will hold all the non-primary
+ * CPU in a spin state while the debugger is active
+ */
+ if (!kgdb_single_step || !kgdb_contthread) {
+ for (i = 0; i < NR_CPUS; i++)
+ atomic_set(&passive_cpu_wait[i], 1);
+ }
+
+ /*
+ * spin_lock code is good enough as a barrier so we don't
+ * need one here:
+ */
+ atomic_set(&cpu_in_kgdb[ks->cpu], 1);
+
+#ifdef CONFIG_SMP
+ /* Signal the other CPUs to enter kgdb_wait() */
+ if ((!kgdb_single_step || !kgdb_contthread) && kgdb_do_roundup)
+ kgdb_roundup_cpus(flags);
+#endif
+
+ /*
+ * Wait for the other CPUs to be notified and be waiting for us:
+ */
+ for_each_online_cpu(i) {
+ while (!atomic_read(&cpu_in_kgdb[i]))
+ cpu_relax();
+ }
+
+ /*
+ * At this point the primary processor is completely
+ * in the debugger and all secondary CPUs are quiescent
+ */
+ kgdb_post_primary_code(ks->linux_regs, ks->ex_vector, ks->err_code);
+ kgdb_deactivate_sw_breakpoints();
+ kgdb_single_step = 0;
+ kgdb_contthread = NULL;
+ exception_level = 0;
+
+ /* Talk to debugger with gdbserial protocol */
+ error = gdb_serial_stub(ks);
+
+ /* Call the I/O driver's post_exception routine */
+ if (kgdb_io_ops->post_exception)
+ kgdb_io_ops->post_exception();
+
+ kgdb_info[ks->cpu].debuggerinfo = NULL;
+ kgdb_info[ks->cpu].task = NULL;
+ atomic_set(&cpu_in_kgdb[ks->cpu], 0);
+
+ if (!kgdb_single_step || !kgdb_contthread) {
+ for (i = NR_CPUS-1; i >= 0; i--)
+ atomic_set(&passive_cpu_wait[i], 0);
+ /*
+ * Wait till all the CPUs have quit
+ * from the debugger.
+ */
+ for_each_online_cpu(i) {
+ while (atomic_read(&cpu_in_kgdb[i]))
+ cpu_relax();
+ }
+ }
+
+kgdb_restore:
+ /* Free kgdb_active */
+ atomic_set(&kgdb_active, -1);
+ clocksource_touch_watchdog();
+ local_irq_restore(flags);
+
+ return error;
+}
+
+int kgdb_nmicallback(int cpu, void *regs)
+{
+#ifdef CONFIG_SMP
+ if (!atomic_read(&cpu_in_kgdb[cpu]) &&
+ atomic_read(&kgdb_active) != cpu &&
+ atomic_read(&cpu_in_kgdb[atomic_read(&kgdb_active)])) {
+ kgdb_wait((struct pt_regs *)regs);
+ return 0;
+ }
+#endif
+ return 1;
+}
+
+void kgdb_console_write(struct console *co, const char *s, unsigned count)
+{
+ unsigned long flags;
+
+ /* If we're debugging, or KGDB has not connected, don't try
+ * and print. */
+ if (!kgdb_connected || atomic_read(&kgdb_active) != -1)
+ return;
+
+ local_irq_save(flags);
+ kgdb_msg_write(s, count);
+ local_irq_restore(flags);
+}
+
+static struct console kgdbcons = {
+ .name = "kgdb",
+ .write = kgdb_console_write,
+ .flags = CON_PRINTBUFFER | CON_ENABLED,
+ .index = -1,
+};
+
+#ifdef CONFIG_MAGIC_SYSRQ
+static void sysrq_handle_gdb(int key, struct tty_struct *tty)
+{
+ if (!kgdb_io_ops) {
+ printk(KERN_CRIT "ERROR: No KGDB I/O module available\n");
+ return;
+ }
+ if (!kgdb_connected)
+ printk(KERN_CRIT "Entering KGDB\n");
+
+ kgdb_breakpoint();
+}
+
+static struct sysrq_key_op sysrq_gdb_op = {
+ .handler = sysrq_handle_gdb,
+ .help_msg = "Gdb",
+ .action_msg = "GDB",
+};
+#endif
+
+static void kgdb_register_callbacks(void)
+{
+ if (!kgdb_io_module_registered) {
+ kgdb_io_module_registered = 1;
+ kgdb_arch_init();
+#ifdef CONFIG_MAGIC_SYSRQ
+ register_sysrq_key('g', &sysrq_gdb_op);
+#endif
+ if (kgdb_use_con && !kgdb_con_registered) {
+ register_console(&kgdbcons);
+ kgdb_con_registered = 1;
+ }
+ }
+}
+
+static void kgdb_unregister_callbacks(void)
+{
+ /*
+ * When this routine is called KGDB should unregister from the
+ * panic handler and clean up, making sure it is not handling any
+ * break exceptions at the time.
+ */
+ if (kgdb_io_module_registered) {
+ kgdb_io_module_registered = 0;
+ kgdb_arch_exit();
+#ifdef CONFIG_MAGIC_SYSRQ
+ unregister_sysrq_key('g', &sysrq_gdb_op);
+#endif
+ if (kgdb_con_registered) {
+ unregister_console(&kgdbcons);
+ kgdb_con_registered = 0;
+ }
+ }
+}
+
+static void kgdb_initial_breakpoint(void)
+{
+ kgdb_break_asap = 0;
+
+ printk(KERN_CRIT "kgdb: Waiting for connection from remote gdb...\n");
+ kgdb_breakpoint();
+}
+
+/**
+ * kgdb_register_io_module - register KGDB IO module
+ * @new_kgdb_io_ops: the io ops vector
+ *
+ * Register it with the KGDB core.
+ */
+int kgdb_register_io_module(struct kgdb_io *new_kgdb_io_ops)
+{
+ int err;
+
+ spin_lock(&kgdb_registration_lock);
+
+ if (kgdb_io_ops) {
+ spin_unlock(&kgdb_registration_lock);
+
+ printk(KERN_ERR "kgdb: Another I/O driver is already "
+ "registered with KGDB.\n");
+ return -EBUSY;
+ }
+
+ if (new_kgdb_io_ops->init) {
+ err = new_kgdb_io_ops->init();
+ if (err) {
+ spin_unlock(&kgdb_registration_lock);
+ return err;
+ }
+ }
+
+ kgdb_io_ops = new_kgdb_io_ops;
+
+ spin_unlock(&kgdb_registration_lock);
+
+ printk(KERN_INFO "kgdb: Registered I/O driver %s.\n",
+ new_kgdb_io_ops->name);
+
+ /* Arm KGDB now. */
+ kgdb_register_callbacks();
+
+ if (kgdb_break_asap)
+ kgdb_initial_breakpoint();
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(kgdb_register_io_module);
+
+/**
+ * kkgdb_unregister_io_module - unregister KGDB IO module
+ * @old_kgdb_io_ops: the io ops vector
+ *
+ * Unregister it with the KGDB core.
+ */
+void kgdb_unregister_io_module(struct kgdb_io *old_kgdb_io_ops)
+{
+ BUG_ON(kgdb_connected);
+
+ /*
+ * KGDB is no longer able to communicate out, so
+ * unregister our callbacks and reset state.
+ */
+ kgdb_unregister_callbacks();
+
+ spin_lock(&kgdb_registration_lock);
+
+ WARN_ON_ONCE(kgdb_io_ops != old_kgdb_io_ops);
+ kgdb_io_ops = NULL;
+
+ spin_unlock(&kgdb_registration_lock);
+
+ printk(KERN_INFO
+ "kgdb: Unregistered I/O driver %s, debugger disabled.\n",
+ old_kgdb_io_ops->name);
+}
+EXPORT_SYMBOL_GPL(kgdb_unregister_io_module);
+
+/**
+ * kgdb_breakpoint - generate breakpoint exception
+ *
+ * This function will generate a breakpoint exception. It is used at the
+ * beginning of a program to sync up with a debugger and can be used
+ * otherwise as a quick means to stop program execution and "break" into
+ * the debugger.
+ */
+void kgdb_breakpoint(void)
+{
+ atomic_set(&kgdb_setting_breakpoint, 1);
+ wmb(); /* Sync point before breakpoint */
+ arch_kgdb_breakpoint();
+ wmb(); /* Sync point after breakpoint */
+ atomic_set(&kgdb_setting_breakpoint, 0);
+}
+EXPORT_SYMBOL_GPL(kgdb_breakpoint);
+
+static int __init opt_kgdb_wait(char *str)
+{
+ kgdb_break_asap = 1;
+
+ if (kgdb_io_module_registered)
+ kgdb_initial_breakpoint();
+
+ return 0;
+}
+
+early_param("kgdbwait", opt_kgdb_wait);
diff --git a/kernel/marker.c b/kernel/marker.c
index 041c33e..005b959 100644
--- a/kernel/marker.c
+++ b/kernel/marker.c
@@ -671,6 +671,9 @@
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+ synchronize_sched(); /* Until we have the call_rcu_sched() */
+#endif
call_rcu(&entry->rcu, free_old_closure);
end:
mutex_unlock(&markers_mutex);
@@ -714,6 +717,9 @@
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+ synchronize_sched(); /* Until we have the call_rcu_sched() */
+#endif
call_rcu(&entry->rcu, free_old_closure);
remove_marker(name); /* Ignore busy error message */
ret = 0;
@@ -792,6 +798,9 @@
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+ synchronize_sched(); /* Until we have the call_rcu_sched() */
+#endif
call_rcu(&entry->rcu, free_old_closure);
remove_marker(entry->name); /* Ignore busy error message */
end:
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 2eae91f..ae5c6c1 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -1087,45 +1087,45 @@
maxfire = 20;
prof_expires = cputime_zero;
while (!list_empty(timers)) {
- struct cpu_timer_list *t = list_first_entry(timers,
+ struct cpu_timer_list *tl = list_first_entry(timers,
struct cpu_timer_list,
entry);
- if (!--maxfire || cputime_lt(ptime, t->expires.cpu)) {
- prof_expires = t->expires.cpu;
+ if (!--maxfire || cputime_lt(ptime, tl->expires.cpu)) {
+ prof_expires = tl->expires.cpu;
break;
}
- t->firing = 1;
- list_move_tail(&t->entry, firing);
+ tl->firing = 1;
+ list_move_tail(&tl->entry, firing);
}
++timers;
maxfire = 20;
virt_expires = cputime_zero;
while (!list_empty(timers)) {
- struct cpu_timer_list *t = list_first_entry(timers,
+ struct cpu_timer_list *tl = list_first_entry(timers,
struct cpu_timer_list,
entry);
- if (!--maxfire || cputime_lt(utime, t->expires.cpu)) {
- virt_expires = t->expires.cpu;
+ if (!--maxfire || cputime_lt(utime, tl->expires.cpu)) {
+ virt_expires = tl->expires.cpu;
break;
}
- t->firing = 1;
- list_move_tail(&t->entry, firing);
+ tl->firing = 1;
+ list_move_tail(&tl->entry, firing);
}
++timers;
maxfire = 20;
sched_expires = 0;
while (!list_empty(timers)) {
- struct cpu_timer_list *t = list_first_entry(timers,
+ struct cpu_timer_list *tl = list_first_entry(timers,
struct cpu_timer_list,
entry);
- if (!--maxfire || sum_sched_runtime < t->expires.sched) {
- sched_expires = t->expires.sched;
+ if (!--maxfire || sum_sched_runtime < tl->expires.sched) {
+ sched_expires = tl->expires.sched;
break;
}
- t->firing = 1;
- list_move_tail(&t->entry, firing);
+ tl->firing = 1;
+ list_move_tail(&tl->entry, firing);
}
/*
diff --git a/kernel/printk.c b/kernel/printk.c
index c46a20a..bdd4ea8 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -643,8 +643,21 @@
{
int retval = 0;
- if (can_use_console(cpu))
- retval = !try_acquire_console_sem();
+ if (!try_acquire_console_sem()) {
+ retval = 1;
+
+ /*
+ * If we can't use the console, we need to release
+ * the console semaphore by hand to avoid flushing
+ * the buffer. We need to hold the console semaphore
+ * in order to do this test safely.
+ */
+ if (!can_use_console(cpu)) {
+ console_locked = 0;
+ up(&console_sem);
+ retval = 0;
+ }
+ }
printk_cpu = UINT_MAX;
spin_unlock(&logbuf_lock);
return retval;
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 86a9337..0080968 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -510,10 +510,8 @@
if (!initial) {
/* sleeps upto a single latency don't count. */
- if (sched_feat(NEW_FAIR_SLEEPERS)) {
- vruntime -= calc_delta_fair(sysctl_sched_latency,
- &cfs_rq->load);
- }
+ if (sched_feat(NEW_FAIR_SLEEPERS))
+ vruntime -= sysctl_sched_latency;
/* ensure we never gain time by being placed backwards. */
vruntime = max_vruntime(se->vruntime, vruntime);
diff --git a/kernel/semaphore.c b/kernel/semaphore.c
new file mode 100644
index 0000000..5c2942e
--- /dev/null
+++ b/kernel/semaphore.c
@@ -0,0 +1,264 @@
+/*
+ * Copyright (c) 2008 Intel Corporation
+ * Author: Matthew Wilcox <willy@linux.intel.com>
+ *
+ * Distributed under the terms of the GNU GPL, version 2
+ *
+ * This file implements counting semaphores.
+ * A counting semaphore may be acquired 'n' times before sleeping.
+ * See mutex.c for single-acquisition sleeping locks which enforce
+ * rules which allow code to be debugged more easily.
+ */
+
+/*
+ * Some notes on the implementation:
+ *
+ * The spinlock controls access to the other members of the semaphore.
+ * down_trylock() and up() can be called from interrupt context, so we
+ * have to disable interrupts when taking the lock. It turns out various
+ * parts of the kernel expect to be able to use down() on a semaphore in
+ * interrupt context when they know it will succeed, so we have to use
+ * irqsave variants for down(), down_interruptible() and down_killable()
+ * too.
+ *
+ * The ->count variable represents how many more tasks can acquire this
+ * semaphore. If it's zero, there may be tasks waiting on the wait_list.
+ */
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/semaphore.h>
+#include <linux/spinlock.h>
+
+static noinline void __down(struct semaphore *sem);
+static noinline int __down_interruptible(struct semaphore *sem);
+static noinline int __down_killable(struct semaphore *sem);
+static noinline int __down_timeout(struct semaphore *sem, long jiffies);
+static noinline void __up(struct semaphore *sem);
+
+/**
+ * down - acquire the semaphore
+ * @sem: the semaphore to be acquired
+ *
+ * Acquires the semaphore. If no more tasks are allowed to acquire the
+ * semaphore, calling this function will put the task to sleep until the
+ * semaphore is released.
+ *
+ * Use of this function is deprecated, please use down_interruptible() or
+ * down_killable() instead.
+ */
+void down(struct semaphore *sem)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&sem->lock, flags);
+ if (likely(sem->count > 0))
+ sem->count--;
+ else
+ __down(sem);
+ spin_unlock_irqrestore(&sem->lock, flags);
+}
+EXPORT_SYMBOL(down);
+
+/**
+ * down_interruptible - acquire the semaphore unless interrupted
+ * @sem: the semaphore to be acquired
+ *
+ * Attempts to acquire the semaphore. If no more tasks are allowed to
+ * acquire the semaphore, calling this function will put the task to sleep.
+ * If the sleep is interrupted by a signal, this function will return -EINTR.
+ * If the semaphore is successfully acquired, this function returns 0.
+ */
+int down_interruptible(struct semaphore *sem)
+{
+ unsigned long flags;
+ int result = 0;
+
+ spin_lock_irqsave(&sem->lock, flags);
+ if (likely(sem->count > 0))
+ sem->count--;
+ else
+ result = __down_interruptible(sem);
+ spin_unlock_irqrestore(&sem->lock, flags);
+
+ return result;
+}
+EXPORT_SYMBOL(down_interruptible);
+
+/**
+ * down_killable - acquire the semaphore unless killed
+ * @sem: the semaphore to be acquired
+ *
+ * Attempts to acquire the semaphore. If no more tasks are allowed to
+ * acquire the semaphore, calling this function will put the task to sleep.
+ * If the sleep is interrupted by a fatal signal, this function will return
+ * -EINTR. If the semaphore is successfully acquired, this function returns
+ * 0.
+ */
+int down_killable(struct semaphore *sem)
+{
+ unsigned long flags;
+ int result = 0;
+
+ spin_lock_irqsave(&sem->lock, flags);
+ if (likely(sem->count > 0))
+ sem->count--;
+ else
+ result = __down_killable(sem);
+ spin_unlock_irqrestore(&sem->lock, flags);
+
+ return result;
+}
+EXPORT_SYMBOL(down_killable);
+
+/**
+ * down_trylock - try to acquire the semaphore, without waiting
+ * @sem: the semaphore to be acquired
+ *
+ * Try to acquire the semaphore atomically. Returns 0 if the mutex has
+ * been acquired successfully or 1 if it it cannot be acquired.
+ *
+ * NOTE: This return value is inverted from both spin_trylock and
+ * mutex_trylock! Be careful about this when converting code.
+ *
+ * Unlike mutex_trylock, this function can be used from interrupt context,
+ * and the semaphore can be released by any task or interrupt.
+ */
+int down_trylock(struct semaphore *sem)
+{
+ unsigned long flags;
+ int count;
+
+ spin_lock_irqsave(&sem->lock, flags);
+ count = sem->count - 1;
+ if (likely(count >= 0))
+ sem->count = count;
+ spin_unlock_irqrestore(&sem->lock, flags);
+
+ return (count < 0);
+}
+EXPORT_SYMBOL(down_trylock);
+
+/**
+ * down_timeout - acquire the semaphore within a specified time
+ * @sem: the semaphore to be acquired
+ * @jiffies: how long to wait before failing
+ *
+ * Attempts to acquire the semaphore. If no more tasks are allowed to
+ * acquire the semaphore, calling this function will put the task to sleep.
+ * If the semaphore is not released within the specified number of jiffies,
+ * this function returns -ETIME. It returns 0 if the semaphore was acquired.
+ */
+int down_timeout(struct semaphore *sem, long jiffies)
+{
+ unsigned long flags;
+ int result = 0;
+
+ spin_lock_irqsave(&sem->lock, flags);
+ if (likely(sem->count > 0))
+ sem->count--;
+ else
+ result = __down_timeout(sem, jiffies);
+ spin_unlock_irqrestore(&sem->lock, flags);
+
+ return result;
+}
+EXPORT_SYMBOL(down_timeout);
+
+/**
+ * up - release the semaphore
+ * @sem: the semaphore to release
+ *
+ * Release the semaphore. Unlike mutexes, up() may be called from any
+ * context and even by tasks which have never called down().
+ */
+void up(struct semaphore *sem)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&sem->lock, flags);
+ if (likely(list_empty(&sem->wait_list)))
+ sem->count++;
+ else
+ __up(sem);
+ spin_unlock_irqrestore(&sem->lock, flags);
+}
+EXPORT_SYMBOL(up);
+
+/* Functions for the contended case */
+
+struct semaphore_waiter {
+ struct list_head list;
+ struct task_struct *task;
+ int up;
+};
+
+/*
+ * Because this function is inlined, the 'state' parameter will be
+ * constant, and thus optimised away by the compiler. Likewise the
+ * 'timeout' parameter for the cases without timeouts.
+ */
+static inline int __sched __down_common(struct semaphore *sem, long state,
+ long timeout)
+{
+ struct task_struct *task = current;
+ struct semaphore_waiter waiter;
+
+ list_add_tail(&waiter.list, &sem->wait_list);
+ waiter.task = task;
+ waiter.up = 0;
+
+ for (;;) {
+ if (state == TASK_INTERRUPTIBLE && signal_pending(task))
+ goto interrupted;
+ if (state == TASK_KILLABLE && fatal_signal_pending(task))
+ goto interrupted;
+ if (timeout <= 0)
+ goto timed_out;
+ __set_task_state(task, state);
+ spin_unlock_irq(&sem->lock);
+ timeout = schedule_timeout(timeout);
+ spin_lock_irq(&sem->lock);
+ if (waiter.up)
+ return 0;
+ }
+
+ timed_out:
+ list_del(&waiter.list);
+ return -ETIME;
+
+ interrupted:
+ list_del(&waiter.list);
+ return -EINTR;
+}
+
+static noinline void __sched __down(struct semaphore *sem)
+{
+ __down_common(sem, TASK_UNINTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
+}
+
+static noinline int __sched __down_interruptible(struct semaphore *sem)
+{
+ return __down_common(sem, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
+}
+
+static noinline int __sched __down_killable(struct semaphore *sem)
+{
+ return __down_common(sem, TASK_KILLABLE, MAX_SCHEDULE_TIMEOUT);
+}
+
+static noinline int __sched __down_timeout(struct semaphore *sem, long jiffies)
+{
+ return __down_common(sem, TASK_UNINTERRUPTIBLE, jiffies);
+}
+
+static noinline void __sched __up(struct semaphore *sem)
+{
+ struct semaphore_waiter *waiter = list_first_entry(&sem->wait_list,
+ struct semaphore_waiter, list);
+ list_del(&waiter->list);
+ waiter->up = 1;
+ wake_up_process(waiter->task);
+}
diff --git a/kernel/signal.c b/kernel/signal.c
index 6af1210..cc8303c 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1757,6 +1757,45 @@
return 1;
}
+static int ptrace_signal(int signr, siginfo_t *info,
+ struct pt_regs *regs, void *cookie)
+{
+ if (!(current->ptrace & PT_PTRACED))
+ return signr;
+
+ ptrace_signal_deliver(regs, cookie);
+
+ /* Let the debugger run. */
+ ptrace_stop(signr, 0, info);
+
+ /* We're back. Did the debugger cancel the sig? */
+ signr = current->exit_code;
+ if (signr == 0)
+ return signr;
+
+ current->exit_code = 0;
+
+ /* Update the siginfo structure if the signal has
+ changed. If the debugger wanted something
+ specific in the siginfo structure then it should
+ have updated *info via PTRACE_SETSIGINFO. */
+ if (signr != info->si_signo) {
+ info->si_signo = signr;
+ info->si_errno = 0;
+ info->si_code = SI_USER;
+ info->si_pid = task_pid_vnr(current->parent);
+ info->si_uid = current->parent->uid;
+ }
+
+ /* If the (new) signal is now blocked, requeue it. */
+ if (sigismember(¤t->blocked, signr)) {
+ specific_send_sig_info(signr, info, current);
+ signr = 0;
+ }
+
+ return signr;
+}
+
int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka,
struct pt_regs *regs, void *cookie)
{
@@ -1785,36 +1824,10 @@
if (!signr)
break; /* will return 0 */
- if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
- ptrace_signal_deliver(regs, cookie);
-
- /* Let the debugger run. */
- ptrace_stop(signr, 0, info);
-
- /* We're back. Did the debugger cancel the sig? */
- signr = current->exit_code;
- if (signr == 0)
+ if (signr != SIGKILL) {
+ signr = ptrace_signal(signr, info, regs, cookie);
+ if (!signr)
continue;
-
- current->exit_code = 0;
-
- /* Update the siginfo structure if the signal has
- changed. If the debugger wanted something
- specific in the siginfo structure then it should
- have updated *info via PTRACE_SETSIGINFO. */
- if (signr != info->si_signo) {
- info->si_signo = signr;
- info->si_errno = 0;
- info->si_code = SI_USER;
- info->si_pid = task_pid_vnr(current->parent);
- info->si_uid = current->parent->uid;
- }
-
- /* If the (new) signal is now blocked, requeue it. */
- if (sigismember(¤t->blocked, signr)) {
- specific_send_sig_info(signr, info, current);
- continue;
- }
}
ka = ¤t->sighand->action[signr-1];
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 7f60097..73961f3 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -141,8 +141,16 @@
}
if (!list_empty(&watchdog_list)) {
- __mod_timer(&watchdog_timer,
- watchdog_timer.expires + WATCHDOG_INTERVAL);
+ /*
+ * Cycle through CPUs to check if the CPUs stay
+ * synchronized to each other.
+ */
+ int next_cpu = next_cpu(raw_smp_processor_id(), cpu_online_map);
+
+ if (next_cpu >= NR_CPUS)
+ next_cpu = first_cpu(cpu_online_map);
+ watchdog_timer.expires += WATCHDOG_INTERVAL;
+ add_timer_on(&watchdog_timer, next_cpu);
}
spin_unlock(&watchdog_lock);
}
@@ -164,7 +172,8 @@
if (!started && watchdog) {
watchdog_last = watchdog->read();
watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
- add_timer(&watchdog_timer);
+ add_timer_on(&watchdog_timer,
+ first_cpu(cpu_online_map));
}
} else {
if (cs->flags & CLOCK_SOURCE_IS_CONTINUOUS)
@@ -185,7 +194,8 @@
watchdog_last = watchdog->read();
watchdog_timer.expires =
jiffies + WATCHDOG_INTERVAL;
- add_timer(&watchdog_timer);
+ add_timer_on(&watchdog_timer,
+ first_cpu(cpu_online_map));
}
}
}
@@ -222,6 +232,18 @@
}
/**
+ * clocksource_touch_watchdog - Update watchdog
+ *
+ * Update the watchdog after exception contexts such as kgdb so as not
+ * to incorrectly trip the watchdog.
+ *
+ */
+void clocksource_touch_watchdog(void)
+{
+ clocksource_resume_watchdog();
+}
+
+/**
* clocksource_get_next - Returns the selected clocksource
*
*/
diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index e1bd50c..fdfa0c7 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -14,7 +14,7 @@
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/hrtimer.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/profile.h>
#include <linux/sched.h>
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 1bea399..4f38865 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -14,12 +14,14 @@
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/hrtimer.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/profile.h>
#include <linux/sched.h>
#include <linux/tick.h>
+#include <asm/irq_regs.h>
+
#include "tick-internal.h"
/*
diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c
index 0258d31..450c049 100644
--- a/kernel/time/tick-oneshot.c
+++ b/kernel/time/tick-oneshot.c
@@ -14,7 +14,7 @@
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/hrtimer.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/profile.h>
#include <linux/sched.h>
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 686da82..69dba0c 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -158,9 +158,8 @@
}
}
-static ktime_t tick_nohz_start_idle(int cpu)
+static ktime_t tick_nohz_start_idle(struct tick_sched *ts)
{
- struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
ktime_t now, delta;
now = ktime_get();
@@ -201,8 +200,8 @@
local_irq_save(flags);
cpu = smp_processor_id();
- now = tick_nohz_start_idle(cpu);
ts = &per_cpu(tick_cpu_sched, cpu);
+ now = tick_nohz_start_idle(ts);
/*
* If this cpu is offline and it is the one which updates
@@ -222,7 +221,6 @@
if (need_resched())
goto end;
- cpu = smp_processor_id();
if (unlikely(local_softirq_pending())) {
static int ratelimit;
diff --git a/kernel/timer.c b/kernel/timer.c
index b024106..f3d35d4 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1228,13 +1228,6 @@
return 0;
}
-/*
- * lockdep: we want to track each per-CPU base as a separate lock-class,
- * but timer-bases are kmalloc()-ed, so we need to attach separate
- * keys to them:
- */
-static struct lock_class_key base_lock_keys[NR_CPUS];
-
static int __cpuinit init_timers_cpu(int cpu)
{
int j;
@@ -1277,7 +1270,6 @@
}
spin_lock_init(&base->lock);
- lockdep_set_class(&base->lock, base_lock_keys + cpu);
for (j = 0; j < TVN_SIZE; j++) {
INIT_LIST_HEAD(base->tv5.vec + j);
@@ -1316,8 +1308,8 @@
new_base = get_cpu_var(tvec_bases);
local_irq_disable();
- double_spin_lock(&new_base->lock, &old_base->lock,
- smp_processor_id() < cpu);
+ spin_lock(&new_base->lock);
+ spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
BUG_ON(old_base->running_timer);
@@ -1330,8 +1322,8 @@
migrate_timer_list(new_base, old_base->tv5.vec + i);
}
- double_spin_unlock(&new_base->lock, &old_base->lock,
- smp_processor_id() < cpu);
+ spin_unlock(&old_base->lock);
+ spin_unlock(&new_base->lock);
local_irq_enable();
put_cpu_var(tvec_bases);
}
diff --git a/kernel/uid16.c b/kernel/uid16.c
index dd308ba..3e41c16 100644
--- a/kernel/uid16.c
+++ b/kernel/uid16.c
@@ -21,7 +21,7 @@
{
long ret = sys_chown(filename, low2highuid(user), low2highgid(group));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, filename, user, group);
return ret;
}
@@ -29,7 +29,7 @@
{
long ret = sys_lchown(filename, low2highuid(user), low2highgid(group));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, filename, user, group);
return ret;
}
@@ -37,7 +37,7 @@
{
long ret = sys_fchown(fd, low2highuid(user), low2highgid(group));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, fd, user, group);
return ret;
}
@@ -45,7 +45,7 @@
{
long ret = sys_setregid(low2highgid(rgid), low2highgid(egid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(2, ret, rgid, egid);
return ret;
}
@@ -53,7 +53,7 @@
{
long ret = sys_setgid(low2highgid(gid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, gid);
return ret;
}
@@ -61,7 +61,7 @@
{
long ret = sys_setreuid(low2highuid(ruid), low2highuid(euid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(2, ret, ruid, euid);
return ret;
}
@@ -69,7 +69,7 @@
{
long ret = sys_setuid(low2highuid(uid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, uid);
return ret;
}
@@ -78,7 +78,7 @@
long ret = sys_setresuid(low2highuid(ruid), low2highuid(euid),
low2highuid(suid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, ruid, euid, suid);
return ret;
}
@@ -98,7 +98,7 @@
long ret = sys_setresgid(low2highgid(rgid), low2highgid(egid),
low2highgid(sgid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, rgid, egid, sgid);
return ret;
}
@@ -117,7 +117,7 @@
{
long ret = sys_setfsuid(low2highuid(uid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, uid);
return ret;
}
@@ -125,7 +125,7 @@
{
long ret = sys_setfsgid(low2highgid(gid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, gid);
return ret;
}
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index ff06611..00ff4d0 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -219,6 +219,7 @@
struct timer_list *timer = &dwork->timer;
struct work_struct *work = &dwork->work;
+ timer_stats_timer_set_start_info(&dwork->timer);
if (!test_and_set_bit(WORK_STRUCT_PENDING, work_data_bits(work))) {
BUG_ON(timer_pending(timer));
BUG_ON(!list_empty(&work->entry));
@@ -580,6 +581,7 @@
int schedule_delayed_work_on(int cpu,
struct delayed_work *dwork, unsigned long delay)
{
+ timer_stats_timer_set_start_info(&dwork->timer);
return queue_delayed_work_on(cpu, keventd_wq, dwork, delay);
}
EXPORT_SYMBOL(schedule_delayed_work_on);
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 0796c1a..aaba784 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -211,7 +211,7 @@
config SLUB_STATS
default n
bool "Enable SLUB performance statistics"
- depends on SLUB
+ depends on SLUB && SLUB_DEBUG && SYSFS
help
SLUB statistics are useful to debug SLUBs allocation behavior in
order find ways to optimize the allocator. This should never be
@@ -265,16 +265,6 @@
This feature allows mutex semantics violations to be detected and
reported.
-config DEBUG_SEMAPHORE
- bool "Semaphore debugging"
- depends on DEBUG_KERNEL
- depends on ALPHA || FRV
- default n
- help
- If you say Y here then semaphore processing will issue lots of
- verbose debugging messages. If you suspect a semaphore problem or a
- kernel hacker asks for this option then say Y. Otherwise say N.
-
config DEBUG_LOCK_ALLOC
bool "Lock debugging: detect incorrect freeing of live locks"
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
@@ -622,3 +612,5 @@
See Documentation/debugging-via-ohci1394.txt for more information.
source "samples/Kconfig"
+
+source "lib/Kconfig.kgdb"
diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb
new file mode 100644
index 0000000..f2e01ac
--- /dev/null
+++ b/lib/Kconfig.kgdb
@@ -0,0 +1,58 @@
+
+menuconfig KGDB
+ bool "KGDB: kernel debugging with remote gdb"
+ select FRAME_POINTER
+ depends on HAVE_ARCH_KGDB
+ depends on DEBUG_KERNEL && EXPERIMENTAL
+ help
+ If you say Y here, it will be possible to remotely debug the
+ kernel using gdb. Documentation of kernel debugger is available
+ at http://kgdb.sourceforge.net as well as in DocBook form
+ in Documentation/DocBook/. If unsure, say N.
+
+config HAVE_ARCH_KGDB_SHADOW_INFO
+ bool
+
+config HAVE_ARCH_KGDB
+ bool
+
+config KGDB_SERIAL_CONSOLE
+ tristate "KGDB: use kgdb over the serial console"
+ depends on KGDB
+ select CONSOLE_POLL
+ select MAGIC_SYSRQ
+ default y
+ help
+ Share a serial console with kgdb. Sysrq-g must be used
+ to break in initially.
+
+config KGDB_TESTS
+ bool "KGDB: internal test suite"
+ depends on KGDB
+ default n
+ help
+ This is a kgdb I/O module specifically designed to test
+ kgdb's internal functions. This kgdb I/O module is
+ intended to for the development of new kgdb stubs
+ as well as regression testing the kgdb internals.
+ See the drivers/misc/kgdbts.c for the details about
+ the tests. The most basic of this I/O module is to boot
+ a kernel boot arguments "kgdbwait kgdbts=V1F100"
+
+config KGDB_TESTS_ON_BOOT
+ bool "KGDB: Run tests on boot"
+ depends on KGDB_TESTS
+ default n
+ help
+ Run the kgdb tests on boot up automatically without the need
+ to pass in a kernel parameter
+
+config KGDB_TESTS_BOOT_STRING
+ string "KGDB: which internal kgdb tests to run"
+ depends on KGDB_TESTS_ON_BOOT
+ default "V1F100"
+ help
+ This is the command string to send the kgdb test suite on
+ boot. See the drivers/misc/kgdbts.c for detailed
+ information about other strings you could use beyond the
+ default of V1F100.
diff --git a/lib/Makefile b/lib/Makefile
index 23de261..28dba90 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -29,7 +29,6 @@
obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock_debug.o
lib-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
-lib-$(CONFIG_SEMAPHORE_SLEEPERS) += semaphore-sleepers.o
lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
diff --git a/lib/kernel_lock.c b/lib/kernel_lock.c
index 812dbf0..fbc11a3 100644
--- a/lib/kernel_lock.c
+++ b/lib/kernel_lock.c
@@ -8,6 +8,7 @@
#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
+#include <asm/semaphore.h>
/*
* The 'big kernel semaphore'
diff --git a/lib/lzo/lzo1x_decompress.c b/lib/lzo/lzo1x_decompress.c
index 9dc7056..77f0f9b 100644
--- a/lib/lzo/lzo1x_decompress.c
+++ b/lib/lzo/lzo1x_decompress.c
@@ -158,7 +158,7 @@
t += 7 + *ip++;
}
m_pos -= le16_to_cpu(get_unaligned(
- (const unsigned short *)ip) >> 2);
+ (const unsigned short *)ip)) >> 2;
ip += 2;
if (m_pos == op)
goto eof_found;
diff --git a/lib/random32.c b/lib/random32.c
index ec7f81d..ca87d86 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -97,13 +97,18 @@
* @seed: seed value
*
* Add some additional seeding to the random32() pool.
- * Note: this pool is per cpu so it only affects current CPU.
*/
void srandom32(u32 entropy)
{
- struct rnd_state *state = &get_cpu_var(net_rand_state);
- __set_random32(state, state->s1 ^ entropy);
- put_cpu_var(state);
+ int i;
+ /*
+ * No locking on the CPUs, but then somewhat random results are, well,
+ * expected.
+ */
+ for_each_possible_cpu (i) {
+ struct rnd_state *state = &per_cpu(net_rand_state, i);
+ __set_random32(state, state->s1 ^ entropy);
+ }
}
EXPORT_SYMBOL(srandom32);
diff --git a/lib/semaphore-sleepers.c b/lib/semaphore-sleepers.c
deleted file mode 100644
index 0198782..0000000
--- a/lib/semaphore-sleepers.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * i386 and x86-64 semaphore implementation.
- *
- * (C) Copyright 1999 Linus Torvalds
- *
- * Portions Copyright 1999 Red Hat, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org>
- */
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <asm/semaphore.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is protected
- * by the spinlock in the semaphore's waitqueue head.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- * - only on a boundary condition do we need to care. When we go
- * from a negative count to a non-negative, we wake people up.
- * - when we go from a non-negative count to a negative do we
- * (a) synchronize with the "sleeper" count and (b) make sure
- * that we're on the wakeup list before we synchronize so that
- * we cannot lose wakeup events.
- */
-
-void __up(struct semaphore *sem)
-{
- wake_up(&sem->wait);
-}
-
-void __sched __down(struct semaphore *sem)
-{
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- unsigned long flags;
-
- tsk->state = TASK_UNINTERRUPTIBLE;
- spin_lock_irqsave(&sem->wait.lock, flags);
- add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock in
- * the wait_queue_head.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- schedule();
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- tsk->state = TASK_UNINTERRUPTIBLE;
- }
- remove_wait_queue_locked(&sem->wait, &wait);
- wake_up_locked(&sem->wait);
- spin_unlock_irqrestore(&sem->wait.lock, flags);
- tsk->state = TASK_RUNNING;
-}
-
-int __sched __down_interruptible(struct semaphore *sem)
-{
- int retval = 0;
- struct task_struct *tsk = current;
- DECLARE_WAITQUEUE(wait, tsk);
- unsigned long flags;
-
- tsk->state = TASK_INTERRUPTIBLE;
- spin_lock_irqsave(&sem->wait.lock, flags);
- add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
- sem->sleepers++;
- for (;;) {
- int sleepers = sem->sleepers;
-
- /*
- * With signals pending, this turns into
- * the trylock failure case - we won't be
- * sleeping, and we* can't get the lock as
- * it has contention. Just correct the count
- * and exit.
- */
- if (signal_pending(current)) {
- retval = -EINTR;
- sem->sleepers = 0;
- atomic_add(sleepers, &sem->count);
- break;
- }
-
- /*
- * Add "everybody else" into it. They aren't
- * playing, because we own the spinlock in
- * wait_queue_head. The "-1" is because we're
- * still hoping to get the semaphore.
- */
- if (!atomic_add_negative(sleepers - 1, &sem->count)) {
- sem->sleepers = 0;
- break;
- }
- sem->sleepers = 1; /* us - see -1 above */
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- schedule();
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- tsk->state = TASK_INTERRUPTIBLE;
- }
- remove_wait_queue_locked(&sem->wait, &wait);
- wake_up_locked(&sem->wait);
- spin_unlock_irqrestore(&sem->wait.lock, flags);
-
- tsk->state = TASK_RUNNING;
- return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- *
- * We could have done the trylock with a
- * single "cmpxchg" without failure cases,
- * but then it wouldn't work on a 386.
- */
-int __down_trylock(struct semaphore *sem)
-{
- int sleepers;
- unsigned long flags;
-
- spin_lock_irqsave(&sem->wait.lock, flags);
- sleepers = sem->sleepers + 1;
- sem->sleepers = 0;
-
- /*
- * Add "everybody else" and us into it. They aren't
- * playing, because we own the spinlock in the
- * wait_queue_head.
- */
- if (!atomic_add_negative(sleepers, &sem->count)) {
- wake_up_locked(&sem->wait);
- }
-
- spin_unlock_irqrestore(&sem->wait.lock, flags);
- return 1;
-}
diff --git a/mm/Makefile b/mm/Makefile
index a5b0dd9..18c143b 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -8,7 +8,7 @@
vmalloc.o
obj-y := bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
- page_alloc.o page-writeback.o pdflush.o \
+ maccess.o page_alloc.o page-writeback.o pdflush.o \
readahead.o swap.o truncate.o vmscan.o \
prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
page_isolation.o $(mmu-y)
diff --git a/mm/maccess.c b/mm/maccess.c
new file mode 100644
index 0000000..ac40796
--- /dev/null
+++ b/mm/maccess.c
@@ -0,0 +1,55 @@
+/*
+ * Access kernel memory without faulting.
+ */
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+
+/**
+ * probe_kernel_read(): safely attempt to read from a location
+ * @dst: pointer to the buffer that shall take the data
+ * @src: address to read from
+ * @size: size of the data chunk
+ *
+ * Safely read from address @src to the buffer at @dst. If a kernel fault
+ * happens, handle that and return -EFAULT.
+ */
+long probe_kernel_read(void *dst, void *src, size_t size)
+{
+ long ret;
+ mm_segment_t old_fs = get_fs();
+
+ set_fs(KERNEL_DS);
+ pagefault_disable();
+ ret = __copy_from_user_inatomic(dst,
+ (__force const void __user *)src, size);
+ pagefault_enable();
+ set_fs(old_fs);
+
+ return ret ? -EFAULT : 0;
+}
+EXPORT_SYMBOL_GPL(probe_kernel_read);
+
+/**
+ * probe_kernel_write(): safely attempt to write to a location
+ * @dst: address to write to
+ * @src: pointer to the data that shall be written
+ * @size: size of the data chunk
+ *
+ * Safely write to address @dst from the buffer at @src. If a kernel fault
+ * happens, handle that and return -EFAULT.
+ */
+long probe_kernel_write(void *dst, void *src, size_t size)
+{
+ long ret;
+ mm_segment_t old_fs = get_fs();
+
+ set_fs(KERNEL_DS);
+ pagefault_disable();
+ ret = __copy_to_user_inatomic((__force void __user *)dst, src, size);
+ pagefault_enable();
+ set_fs(old_fs);
+
+ return ret ? -EFAULT : 0;
+}
+EXPORT_SYMBOL_GPL(probe_kernel_write);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 9b648bd..2e0bfc93 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -533,6 +533,9 @@
unsigned long nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
struct mem_cgroup_per_zone *mz;
+ if (mem_cgroup_subsys.disabled)
+ return 0;
+
/*
* Should page_cgroup's go to their own slab?
* One could optimize the performance of the charging routine
@@ -665,6 +668,9 @@
struct mem_cgroup_per_zone *mz;
unsigned long flags;
+ if (mem_cgroup_subsys.disabled)
+ return;
+
/*
* Check if our page_cgroup is valid
*/
@@ -705,6 +711,9 @@
{
struct page_cgroup *pc;
+ if (mem_cgroup_subsys.disabled)
+ return 0;
+
lock_page_cgroup(page);
pc = page_get_page_cgroup(page);
if (pc)
@@ -803,6 +812,9 @@
int ret = -EBUSY;
int node, zid;
+ if (mem_cgroup_subsys.disabled)
+ return 0;
+
css_get(&mem->css);
/*
* page reclaim code (kswapd etc..) will move pages between
@@ -966,7 +978,7 @@
{
struct mem_cgroup_per_node *pn;
struct mem_cgroup_per_zone *mz;
- int zone;
+ int zone, tmp = node;
/*
* This routine is called against possible nodes.
* But it's BUG to call kmalloc() against offline node.
@@ -975,10 +987,9 @@
* never be onlined. It's better to use memory hotplug callback
* function.
*/
- if (node_state(node, N_HIGH_MEMORY))
- pn = kmalloc_node(sizeof(*pn), GFP_KERNEL, node);
- else
- pn = kmalloc(sizeof(*pn), GFP_KERNEL);
+ if (!node_state(node, N_NORMAL_MEMORY))
+ tmp = -1;
+ pn = kmalloc_node(sizeof(*pn), GFP_KERNEL, tmp);
if (!pn)
return 1;
@@ -1053,6 +1064,8 @@
static int mem_cgroup_populate(struct cgroup_subsys *ss,
struct cgroup *cont)
{
+ if (mem_cgroup_subsys.disabled)
+ return 0;
return cgroup_add_files(cont, ss, mem_cgroup_files,
ARRAY_SIZE(mem_cgroup_files));
}
@@ -1065,6 +1078,9 @@
struct mm_struct *mm;
struct mem_cgroup *mem, *old_mem;
+ if (mem_cgroup_subsys.disabled)
+ return;
+
mm = get_task_mm(p);
if (mm == NULL)
return;
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index f255eda..beb592f 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -423,7 +423,7 @@
struct task_struct *p;
cgroup_lock();
- rcu_read_lock();
+ read_lock(&tasklist_lock);
retry:
p = select_bad_process(&points, mem);
if (PTR_ERR(p) == -1UL)
@@ -436,7 +436,7 @@
"Memory cgroup out of memory"))
goto retry;
out:
- rcu_read_unlock();
+ read_unlock(&tasklist_lock);
cgroup_unlock();
}
#endif
diff --git a/mm/slub.c b/mm/slub.c
index 84ed734..7f8aaa2 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -837,6 +837,35 @@
spin_unlock(&n->list_lock);
}
+/* Tracking of the number of slabs for debugging purposes */
+static inline unsigned long slabs_node(struct kmem_cache *s, int node)
+{
+ struct kmem_cache_node *n = get_node(s, node);
+
+ return atomic_long_read(&n->nr_slabs);
+}
+
+static inline void inc_slabs_node(struct kmem_cache *s, int node)
+{
+ struct kmem_cache_node *n = get_node(s, node);
+
+ /*
+ * May be called early in order to allocate a slab for the
+ * kmem_cache_node structure. Solve the chicken-egg
+ * dilemma by deferring the increment of the count during
+ * bootstrap (see early_kmem_cache_node_alloc).
+ */
+ if (!NUMA_BUILD || n)
+ atomic_long_inc(&n->nr_slabs);
+}
+static inline void dec_slabs_node(struct kmem_cache *s, int node)
+{
+ struct kmem_cache_node *n = get_node(s, node);
+
+ atomic_long_dec(&n->nr_slabs);
+}
+
+/* Object debug checks for alloc/free paths */
static void setup_object_debug(struct kmem_cache *s, struct page *page,
void *object)
{
@@ -1028,6 +1057,11 @@
return flags;
}
#define slub_debug 0
+
+static inline unsigned long slabs_node(struct kmem_cache *s, int node)
+ { return 0; }
+static inline void inc_slabs_node(struct kmem_cache *s, int node) {}
+static inline void dec_slabs_node(struct kmem_cache *s, int node) {}
#endif
/*
* Slab allocation and freeing
@@ -1066,7 +1100,6 @@
static struct page *new_slab(struct kmem_cache *s, gfp_t flags, int node)
{
struct page *page;
- struct kmem_cache_node *n;
void *start;
void *last;
void *p;
@@ -1078,9 +1111,7 @@
if (!page)
goto out;
- n = get_node(s, page_to_nid(page));
- if (n)
- atomic_long_inc(&n->nr_slabs);
+ inc_slabs_node(s, page_to_nid(page));
page->slab = s;
page->flags |= 1 << PG_slab;
if (s->flags & (SLAB_DEBUG_FREE | SLAB_RED_ZONE | SLAB_POISON |
@@ -1125,6 +1156,8 @@
NR_SLAB_RECLAIMABLE : NR_SLAB_UNRECLAIMABLE,
-pages);
+ __ClearPageSlab(page);
+ reset_page_mapcount(page);
__free_pages(page, s->order);
}
@@ -1151,11 +1184,7 @@
static void discard_slab(struct kmem_cache *s, struct page *page)
{
- struct kmem_cache_node *n = get_node(s, page_to_nid(page));
-
- atomic_long_dec(&n->nr_slabs);
- reset_page_mapcount(page);
- __ClearPageSlab(page);
+ dec_slabs_node(s, page_to_nid(page));
free_slab(s, page);
}
@@ -1886,15 +1915,18 @@
c->node = 0;
c->offset = s->offset / sizeof(void *);
c->objsize = s->objsize;
+#ifdef CONFIG_SLUB_STATS
+ memset(c->stat, 0, NR_SLUB_STAT_ITEMS * sizeof(unsigned));
+#endif
}
static void init_kmem_cache_node(struct kmem_cache_node *n)
{
n->nr_partial = 0;
- atomic_long_set(&n->nr_slabs, 0);
spin_lock_init(&n->list_lock);
INIT_LIST_HEAD(&n->partial);
#ifdef CONFIG_SLUB_DEBUG
+ atomic_long_set(&n->nr_slabs, 0);
INIT_LIST_HEAD(&n->full);
#endif
}
@@ -2063,7 +2095,7 @@
init_tracking(kmalloc_caches, n);
#endif
init_kmem_cache_node(n);
- atomic_long_inc(&n->nr_slabs);
+ inc_slabs_node(kmalloc_caches, node);
/*
* lockdep requires consistent irq usage for each lock
@@ -2376,7 +2408,7 @@
struct kmem_cache_node *n = get_node(s, node);
n->nr_partial -= free_list(s, n, &n->partial);
- if (atomic_long_read(&n->nr_slabs))
+ if (slabs_node(s, node))
return 1;
}
free_kmem_cache_nodes(s);
@@ -2409,10 +2441,6 @@
struct kmem_cache kmalloc_caches[PAGE_SHIFT + 1] __cacheline_aligned;
EXPORT_SYMBOL(kmalloc_caches);
-#ifdef CONFIG_ZONE_DMA
-static struct kmem_cache *kmalloc_caches_dma[PAGE_SHIFT + 1];
-#endif
-
static int __init setup_slub_min_order(char *str)
{
get_option(&str, &slub_min_order);
@@ -2472,6 +2500,7 @@
}
#ifdef CONFIG_ZONE_DMA
+static struct kmem_cache *kmalloc_caches_dma[PAGE_SHIFT + 1];
static void sysfs_add_func(struct work_struct *w)
{
@@ -2688,21 +2717,6 @@
}
EXPORT_SYMBOL(kfree);
-#if defined(SLUB_DEBUG) || defined(CONFIG_SLABINFO)
-static unsigned long count_partial(struct kmem_cache_node *n)
-{
- unsigned long flags;
- unsigned long x = 0;
- struct page *page;
-
- spin_lock_irqsave(&n->list_lock, flags);
- list_for_each_entry(page, &n->partial, lru)
- x += page->inuse;
- spin_unlock_irqrestore(&n->list_lock, flags);
- return x;
-}
-#endif
-
/*
* kmem_cache_shrink removes empty slabs from the partial lists and sorts
* the remaining slabs by the number of items in use. The slabs with the
@@ -2816,7 +2830,7 @@
* and offline_pages() function shoudn't call this
* callback. So, we must fail.
*/
- BUG_ON(atomic_long_read(&n->nr_slabs));
+ BUG_ON(slabs_node(s, offline_node));
s->node[offline_node] = NULL;
kmem_cache_free(kmalloc_caches, n);
@@ -3181,6 +3195,21 @@
return slab_alloc(s, gfpflags, node, caller);
}
+#if (defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)) || defined(CONFIG_SLABINFO)
+static unsigned long count_partial(struct kmem_cache_node *n)
+{
+ unsigned long flags;
+ unsigned long x = 0;
+ struct page *page;
+
+ spin_lock_irqsave(&n->list_lock, flags);
+ list_for_each_entry(page, &n->partial, lru)
+ x += page->inuse;
+ spin_unlock_irqrestore(&n->list_lock, flags);
+ return x;
+}
+#endif
+
#if defined(CONFIG_SYSFS) && defined(CONFIG_SLUB_DEBUG)
static int validate_slab(struct kmem_cache *s, struct page *page,
unsigned long *map)
@@ -3979,10 +4008,12 @@
len = sprintf(buf, "%lu", sum);
+#ifdef CONFIG_SMP
for_each_online_cpu(cpu) {
if (data[cpu] && len < PAGE_SIZE - 20)
- len += sprintf(buf + len, " c%d=%u", cpu, data[cpu]);
+ len += sprintf(buf + len, " C%d=%u", cpu, data[cpu]);
}
+#endif
kfree(data);
return len + sprintf(buf + len, "\n");
}
diff --git a/mm/sparse.c b/mm/sparse.c
index f6a43c0..98d6b39c 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -149,8 +149,18 @@
/* Record a memory area against a node. */
void __init memory_present(int nid, unsigned long start, unsigned long end)
{
+ unsigned long max_arch_pfn = 1UL << (MAX_PHYSMEM_BITS-PAGE_SHIFT);
unsigned long pfn;
+ /*
+ * Sanity checks - do not allow an architecture to pass
+ * in larger pfns than the maximum scope of sparsemem:
+ */
+ if (start >= max_arch_pfn)
+ return;
+ if (end >= max_arch_pfn)
+ end = max_arch_pfn;
+
start &= PAGE_SECTION_MASK;
for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) {
unsigned long section = pfn_to_section_nr(pfn);
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 422d960..7c7286e 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -388,6 +388,7 @@
"Reclaimable",
"Movable",
"Reserve",
+ "Isolate",
};
static void *frag_start(struct seq_file *m, loff_t *pos)
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index dbc81b9..b33410a 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -374,17 +374,35 @@
memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}
+static void __vlan_device_event(struct net_device *dev, unsigned long event)
+{
+ switch (event) {
+ case NETDEV_CHANGENAME:
+ vlan_proc_rem_dev(dev);
+ if (vlan_proc_add_dev(dev) < 0)
+ pr_warning("8021q: failed to change proc name for %s\n",
+ dev->name);
+ break;
+ }
+}
+
static int vlan_device_event(struct notifier_block *unused, unsigned long event,
void *ptr)
{
struct net_device *dev = ptr;
- struct vlan_group *grp = __vlan_find_group(dev->ifindex);
+ struct vlan_group *grp;
int i, flgs;
struct net_device *vlandev;
if (dev->nd_net != &init_net)
return NOTIFY_DONE;
+ if (is_vlan_dev(dev)) {
+ __vlan_device_event(dev, event);
+ goto out;
+ }
+
+ grp = __vlan_find_group(dev->ifindex);
if (!grp)
goto out;
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 73efcc7..51271ae 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -45,4 +45,9 @@
extern struct rtnl_link_ops vlan_link_ops;
+static inline int is_vlan_dev(struct net_device *dev)
+{
+ return dev->priv_flags & IFF_802_1Q_VLAN;
+}
+
#endif /* !(__BEN_VLAN_802_1Q_INC__) */
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 480ea90..41a76a0 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -692,6 +692,20 @@
return 0;
}
+static void vlan_dev_uninit(struct net_device *dev)
+{
+ struct vlan_priority_tci_mapping *pm;
+ struct vlan_dev_info *vlan = vlan_dev_info(dev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(vlan->egress_priority_map); i++) {
+ while ((pm = vlan->egress_priority_map[i]) != NULL) {
+ vlan->egress_priority_map[i] = pm->next;
+ kfree(pm);
+ }
+ }
+}
+
void vlan_setup(struct net_device *dev)
{
ether_setup(dev);
@@ -701,6 +715,7 @@
dev->change_mtu = vlan_dev_change_mtu;
dev->init = vlan_dev_init;
+ dev->uninit = vlan_dev_uninit;
dev->open = vlan_dev_open;
dev->stop = vlan_dev_stop;
dev->set_mac_address = vlan_dev_set_mac_address;
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index 146cfb0..9671aa5 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -210,11 +210,6 @@
* The following few functions build the content of /proc/net/vlan/config
*/
-static inline int is_vlan_dev(struct net_device *dev)
-{
- return dev->priv_flags & IFF_802_1Q_VLAN;
-}
-
/* start read of /proc/net/vlan/config */
static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(dev_base_lock)
diff --git a/net/atm/lec.c b/net/atm/lec.c
index a2efa7f..3235c57 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -266,7 +266,6 @@
char buf[300];
int i = 0;
#endif /* DUMP_PACKETS >0 */
- DECLARE_MAC_BUF(mac);
pr_debug("lec_start_xmit called\n");
if (!priv->lecd) {
@@ -374,15 +373,19 @@
if (entry && (entry->tx_wait.qlen < LEC_UNRES_QUE_LEN)) {
pr_debug("%s:lec_start_xmit: queuing packet, ",
dev->name);
- pr_debug("MAC address %s\n",
- print_mac(mac, lec_h->h_dest));
+ pr_debug("MAC address " MAC_FMT "\n",
+ lec_h->h_dest[0], lec_h->h_dest[1],
+ lec_h->h_dest[2], lec_h->h_dest[3],
+ lec_h->h_dest[4], lec_h->h_dest[5]);
skb_queue_tail(&entry->tx_wait, skb);
} else {
pr_debug
("%s:lec_start_xmit: tx queue full or no arp entry, dropping, ",
dev->name);
- pr_debug("MAC address %s\n",
- print_mac(mac, lec_h->h_dest));
+ pr_debug("MAC address " MAC_FMT "\n",
+ lec_h->h_dest[0], lec_h->h_dest[1],
+ lec_h->h_dest[2], lec_h->h_dest[3],
+ lec_h->h_dest[4], lec_h->h_dest[5]);
priv->stats.tx_dropped++;
dev_kfree_skb(skb);
}
@@ -394,8 +397,10 @@
while (entry && (skb2 = skb_dequeue(&entry->tx_wait))) {
pr_debug("lec.c: emptying tx queue, ");
- pr_debug("MAC address %s\n",
- print_mac(mac, lec_h->h_dest));
+ pr_debug("MAC address " MAC_FMT "\n",
+ lec_h->h_dest[0], lec_h->h_dest[1],
+ lec_h->h_dest[2], lec_h->h_dest[3],
+ lec_h->h_dest[4], lec_h->h_dest[5]);
lec_send(vcc, skb2, priv);
}
@@ -449,7 +454,6 @@
struct lec_arp_table *entry;
int i;
char *tmp; /* FIXME */
- DECLARE_MAC_BUF(mac);
atomic_sub(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc);
mesg = (struct atmlec_msg *)skb->data;
@@ -536,9 +540,14 @@
struct net_bridge_fdb_entry *f;
pr_debug
- ("%s: bridge zeppelin asks about %s\n",
+ ("%s: bridge zeppelin asks about " MAC_FMT "\n",
dev->name,
- print_mac(mac, mesg->content.proxy.mac_addr));
+ mesg->content.proxy.mac_addr[0],
+ mesg->content.proxy.mac_addr[1],
+ mesg->content.proxy.mac_addr[2],
+ mesg->content.proxy.mac_addr[3],
+ mesg->content.proxy.mac_addr[4],
+ mesg->content.proxy.mac_addr[5]);
if (br_fdb_get_hook == NULL || dev->br_port == NULL)
break;
diff --git a/net/ax25/ax25_uid.c b/net/ax25/ax25_uid.c
index 5f4eb73..57aeba7 100644
--- a/net/ax25/ax25_uid.c
+++ b/net/ax25/ax25_uid.c
@@ -218,9 +218,11 @@
struct hlist_node *node;
write_lock(&ax25_uid_lock);
+again:
ax25_uid_for_each(ax25_uid, node, &ax25_uid_list) {
hlist_del_init(&ax25_uid->uid_node);
ax25_uid_put(ax25_uid);
+ goto again;
}
write_unlock(&ax25_uid_lock);
}
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 1220d8a..d366423 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -53,6 +53,30 @@
/* Bluetooth sockets */
#define BT_MAX_PROTO 8
static struct net_proto_family *bt_proto[BT_MAX_PROTO];
+
+static struct lock_class_key bt_slock_key[BT_MAX_PROTO];
+static struct lock_class_key bt_lock_key[BT_MAX_PROTO];
+static const char *bt_key_strings[BT_MAX_PROTO] = {
+ "sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_HCI",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_SCO",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_BNEP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_CMTP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_HIDP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_AVDTP",
+};
+
+static const char *bt_slock_key_strings[BT_MAX_PROTO] = {
+ "slock-AF_BLUETOOTH-BTPROTO_L2CAP",
+ "slock-AF_BLUETOOTH-BTPROTO_HCI",
+ "slock-AF_BLUETOOTH-BTPROTO_SCO",
+ "slock-AF_BLUETOOTH-BTPROTO_RFCOMM",
+ "slock-AF_BLUETOOTH-BTPROTO_BNEP",
+ "slock-AF_BLUETOOTH-BTPROTO_CMTP",
+ "slock-AF_BLUETOOTH-BTPROTO_HIDP",
+ "slock-AF_BLUETOOTH-BTPROTO_AVDTP",
+};
static DEFINE_RWLOCK(bt_proto_lock);
int bt_sock_register(int proto, struct net_proto_family *ops)
@@ -95,6 +119,21 @@
}
EXPORT_SYMBOL(bt_sock_unregister);
+static void bt_reclassify_sock_lock(struct socket *sock, int proto)
+{
+ struct sock *sk = sock->sk;
+
+ if (!sk)
+ return;
+ BUG_ON(sock_owned_by_user(sk));
+
+ sock_lock_init_class_and_name(sk,
+ bt_slock_key_strings[proto],
+ &bt_slock_key[proto],
+ bt_key_strings[proto],
+ &bt_lock_key[proto]);
+}
+
static int bt_sock_create(struct net *net, struct socket *sock, int proto)
{
int err;
@@ -117,6 +156,7 @@
if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
err = bt_proto[proto]->create(net, sock, proto);
+ bt_reclassify_sock_lock(sock, proto);
module_put(bt_proto[proto]->owner);
}
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index b5d4019..1d36c09 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -84,7 +84,7 @@
};
static struct bt_sock_list hci_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(hci_sk_list.lock)
};
/* Send frame to RAW socket */
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 34f8bf98..2957df4 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -62,7 +62,7 @@
static const struct proto_ops l2cap_sock_ops;
static struct bt_sock_list l2cap_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(l2cap_sk_list.lock)
};
static void __l2cap_sock_close(struct sock *sk, int reason);
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 0c2c937..eb62558 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -423,8 +423,8 @@
rfcomm_dlc_lock(d);
d->state = BT_CLOSED;
- d->state_change(d, err);
rfcomm_dlc_unlock(d);
+ d->state_change(d, err);
skb_queue_purge(&d->tx_queue);
rfcomm_dlc_unlink(d);
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index c46d510..af4e393 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -60,7 +60,7 @@
static const struct proto_ops rfcomm_sock_ops;
static struct bt_sock_list rfcomm_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(rfcomm_sk_list.lock)
};
static void rfcomm_sock_close(struct sock *sk);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index e4c779b..c3f749a 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -570,12 +570,7 @@
return;
rfcomm_dev_del(dev);
- /* We have to drop DLC lock here, otherwise
- rfcomm_dev_put() will dead lock if it's
- the last reference. */
- rfcomm_dlc_unlock(dlc);
rfcomm_dev_put(dev);
- rfcomm_dlc_lock(dlc);
}
} else
tty_hangup(dev->tty);
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index b91d3c8..cd887cd 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -58,7 +58,7 @@
static const struct proto_ops sco_sock_ops;
static struct bt_sock_list sco_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(sco_sk_list.lock)
};
static void __sco_chan_add(struct sco_conn *conn, struct sock *sk, struct sock *parent);
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 1c0efd8..af7e8be 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -110,7 +110,8 @@
* ipt_REJECT needs it. Future netfilter modules might
* require us to fill additional fields. */
static struct net_device __fake_net_device = {
- .hard_header_len = ETH_HLEN
+ .hard_header_len = ETH_HLEN,
+ .nd_net = &init_net,
};
static struct rtable __fake_rtable = {
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 0d0fd28..6087013 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2131,8 +2131,8 @@
* @features: features for the output path (see dev->features)
*
* This function performs segmentation on the given skb. It returns
- * the segment at the given position. It returns NULL if there are
- * no more segments to generate, or when an error is encountered.
+ * a pointer to the first in a list of new skbs for the segments.
+ * In case of error it returns ERR_PTR(err).
*/
struct sk_buff *skb_segment(struct sk_buff *skb, int features)
{
diff --git a/net/core/sock.c b/net/core/sock.c
index 2654c14..7a0567b 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -1725,7 +1725,7 @@
sk->sk_rcvtimeo = MAX_SCHEDULE_TIMEOUT;
sk->sk_sndtimeo = MAX_SCHEDULE_TIMEOUT;
- sk->sk_stamp = ktime_set(-1L, -1L);
+ sk->sk_stamp = ktime_set(-1L, 0);
atomic_set(&sk->sk_refcnt, 1);
atomic_set(&sk->sk_drops, 0);
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index 287a62b..ba2ef94 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -325,6 +325,12 @@
* This is used for transmission as well as for reception.
*/
struct dccp_skb_cb {
+ union {
+ struct inet_skb_parm h4;
+#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
+ struct inet6_skb_parm h6;
+#endif
+ } header;
__u8 dccpd_type:4;
__u8 dccpd_ccval:4;
__u8 dccpd_reset_code,
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 474075a..b337044 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -489,7 +489,6 @@
dh->dccph_checksum = dccp_v4_csum_finish(skb, ireq->loc_addr,
ireq->rmt_addr);
- memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
err = ip_build_and_send_pkt(skb, sk, ireq->loc_addr,
ireq->rmt_addr,
ireq->opt);
diff --git a/net/dccp/output.c b/net/dccp/output.c
index 3b763db..3d7d628 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -126,7 +126,6 @@
DCCP_INC_STATS(DCCP_MIB_OUTSEGS);
- memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
err = icsk->icsk_af_ops->queue_xmit(skb, 0);
return net_xmit_eval(err);
}
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index e3f5d37..c91d3c1 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -1057,6 +1057,9 @@
int ehash_order, bhash_order, i;
int rc = -ENOBUFS;
+ BUILD_BUG_ON(sizeof(struct dccp_skb_cb) >
+ FIELD_SIZEOF(struct sk_buff, cb));
+
dccp_hashinfo.bind_bucket_cachep =
kmem_cache_create("dccp_bind_bucket",
sizeof(struct inet_bind_bucket), 0,
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index a7b4175..a80839b 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -301,7 +301,7 @@
static int eth_validate_addr(struct net_device *dev)
{
if (!is_valid_ether_addr(dev->dev_addr))
- return -EINVAL;
+ return -EADDRNOTAVAIL;
return 0;
}
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index 1e3f87c..200ee1e 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -271,7 +271,6 @@
{
struct ieee80211_hdr_3addr *hdr;
int res, hdrlen;
- DECLARE_MAC_BUF(mac);
if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
return 0;
@@ -283,8 +282,12 @@
res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
atomic_dec(&crypt->refcnt);
if (res < 0) {
- IEEE80211_DEBUG_DROP("decryption failed (SA=%s"
- ") res=%d\n", print_mac(mac, hdr->addr2), res);
+ IEEE80211_DEBUG_DROP("decryption failed (SA=" MAC_FMT
+ ") res=%d\n",
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5],
+ res);
if (res == -2)
IEEE80211_DEBUG_DROP("Decryption failed ICV "
"mismatch (key %d)\n",
@@ -304,7 +307,6 @@
{
struct ieee80211_hdr_3addr *hdr;
int res, hdrlen;
- DECLARE_MAC_BUF(mac);
if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
return 0;
@@ -317,8 +319,12 @@
atomic_dec(&crypt->refcnt);
if (res < 0) {
printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed"
- " (SA=%s keyidx=%d)\n",
- ieee->dev->name, print_mac(mac, hdr->addr2), keyidx);
+ " (SA=" MAC_FMT " keyidx=%d)\n",
+ ieee->dev->name,
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5],
+ keyidx);
return -1;
}
@@ -462,8 +468,10 @@
* frames silently instead of filling system log with
* these reports. */
IEEE80211_DEBUG_DROP("Decryption failed (not set)"
- " (SA=%s)\n",
- print_mac(mac, hdr->addr2));
+ " (SA=" MAC_FMT ")\n",
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
ieee->ieee_stats.rx_discards_undecryptable++;
goto rx_dropped;
}
@@ -474,8 +482,10 @@
fc & IEEE80211_FCTL_PROTECTED && ieee->host_decrypt &&
(keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0) {
printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
- "from %s\n", dev->name,
- print_mac(mac, hdr->addr2));
+ "from " MAC_FMT "\n", dev->name,
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
/* TODO: could inform hostapd about this so that it
* could send auth failure report */
goto rx_dropped;
@@ -653,8 +663,11 @@
* configured */
} else {
IEEE80211_DEBUG_DROP("encryption configured, but RX "
- "frame not encrypted (SA=%s"
- ")\n", print_mac(mac, hdr->addr2));
+ "frame not encrypted (SA="
+ MAC_FMT ")\n",
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
goto rx_dropped;
}
}
@@ -662,9 +675,11 @@
if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !ieee->open_wep &&
!ieee80211_is_eapol_frame(ieee, skb)) {
IEEE80211_DEBUG_DROP("dropped unencrypted RX data "
- "frame from %s"
+ "frame from " MAC_FMT
" (drop_unencrypted=1)\n",
- print_mac(mac, hdr->addr2));
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
goto rx_dropped;
}
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 9c7e5ff..4670683 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -160,7 +160,7 @@
If unsure, say Y. Note that if you want to use DHCP, a DHCP server
must be operating on your network. Read
- <file:Documentation/nfsroot.txt> for details.
+ <file:Documentation/filesystems/nfsroot.txt> for details.
config IP_PNP_BOOTP
bool "IP: BOOTP support"
@@ -175,7 +175,7 @@
does BOOTP itself, providing all necessary information on the kernel
command line, you can say N here. If unsure, say Y. Note that if you
want to use BOOTP, a BOOTP server must be operating on your network.
- Read <file:Documentation/nfsroot.txt> for details.
+ Read <file:Documentation/filesystems/nfsroot.txt> for details.
config IP_PNP_RARP
bool "IP: RARP support"
@@ -187,8 +187,8 @@
discovered automatically at boot time using the RARP protocol (an
older protocol which is being obsoleted by BOOTP and DHCP), say Y
here. Note that if you want to use RARP, a RARP server must be
- operating on your network. Read <file:Documentation/nfsroot.txt> for
- details.
+ operating on your network. Read
+ <file:Documentation/filesystems/nfsroot.txt> for details.
# not yet ready..
# bool ' IP: ARP support' CONFIG_IP_PNP_ARP
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index f3ceca3..4e73e57 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -336,7 +336,7 @@
struct scatterlist *asg;
int err = -EINVAL;
- if (!pskb_may_pull(skb, sizeof(*esph)))
+ if (!pskb_may_pull(skb, sizeof(*esph) + crypto_aead_ivsize(aead)))
goto out;
if (elen <= 0)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index a944e80..40508ba 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -591,7 +591,7 @@
}
if (xfrm_decode_session_reverse(skb_in, &fl, AF_INET))
- goto ende;
+ goto relookup_failed;
if (inet_addr_type(net, fl.fl4_src) == RTN_LOCAL)
err = __ip_route_output_key(net, &rt2, &fl);
@@ -601,7 +601,7 @@
fl2.fl4_dst = fl.fl4_src;
if (ip_route_output_key(net, &rt2, &fl2))
- goto ende;
+ goto relookup_failed;
/* Ugh! */
odst = skb_in->dst;
@@ -614,21 +614,23 @@
}
if (err)
- goto ende;
+ goto relookup_failed;
err = xfrm_lookup((struct dst_entry **)&rt2, &fl, NULL,
XFRM_LOOKUP_ICMP);
- if (err == -ENOENT) {
+ switch (err) {
+ case 0:
+ dst_release(&rt->u.dst);
+ rt = rt2;
+ break;
+ case -EPERM:
+ goto ende;
+ default:
+relookup_failed:
if (!rt)
goto out_unlock;
- goto route_done;
+ break;
}
-
- dst_release(&rt->u.dst);
- rt = rt2;
-
- if (err)
- goto out_unlock;
}
route_done:
diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index 724d69a..a0a3c78 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -86,7 +86,10 @@
void inet_frags_exit_net(struct netns_frags *nf, struct inet_frags *f)
{
nf->low_thresh = 0;
+
+ local_bh_disable();
inet_frag_evictor(nf, f);
+ local_bh_enable();
}
EXPORT_SYMBOL(inet_frags_exit_net);
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 876169f..717c411 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -124,6 +124,7 @@
tw->tw_hash = sk->sk_hash;
tw->tw_ipv6only = 0;
tw->tw_prot = sk->sk_prot_creator;
+ tw->tw_net = sk->sk_net;
atomic_set(&tw->tw_refcnt, 1);
inet_twsk_dead_node_init(tw);
__module_get(tw->tw_prot->owner);
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index 0b3b328..a4506c8 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -85,7 +85,7 @@
if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
goto sr_failed;
- if (unlikely(skb->len > dst_mtu(&rt->u.dst) &&
+ if (unlikely(skb->len > dst_mtu(&rt->u.dst) && !skb_is_gso(skb) &&
(ip_hdr(skb)->frag_off & htons(IP_DF))) && !skb->local_df) {
IP_INC_STATS(IPSTATS_MIB_FRAGFAILS);
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index f72457b..c2921d0 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -1132,7 +1132,7 @@
}
release_sock(sk);
- if (len < sizeof(int) && len > 0 && val>=0 && val<255) {
+ if (len < sizeof(int) && len > 0 && val>=0 && val<=255) {
unsigned char ucval = (unsigned char)val;
len = 1;
if (put_user(len, optlen))
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 7c992fb..4824fe8 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -1411,7 +1411,7 @@
/*
* Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel
- * command line parameter. See Documentation/nfsroot.txt.
+ * command line parameter. See Documentation/filesystems/nfsroot.txt.
*/
static int __init ic_proto_name(char *name)
{
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index fe05da4..4dc1628 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -588,11 +588,9 @@
}
#ifdef CONFIG_PROC_FS
- proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
- if (proc) {
- proc->owner = THIS_MODULE;
- proc->proc_fops = &ip_queue_proc_fops;
- } else {
+ proc = proc_create(IPQ_PROC_FS_NAME, 0, init_net.proc_net,
+ &ip_queue_proc_fops);
+ if (!proc) {
printk(KERN_ERR "ip_queue: failed to create proc entry\n");
goto cleanup_ipqnl;
}
diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index c6cf84c..a12dd32 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -82,8 +82,8 @@
static inline void
clusterip_config_entry_put(struct clusterip_config *c)
{
+ write_lock_bh(&clusterip_lock);
if (atomic_dec_and_test(&c->entries)) {
- write_lock_bh(&clusterip_lock);
list_del(&c->list);
write_unlock_bh(&clusterip_lock);
@@ -96,7 +96,9 @@
#ifdef CONFIG_PROC_FS
remove_proc_entry(c->pde->name, c->pde->parent);
#endif
+ return;
}
+ write_unlock_bh(&clusterip_lock);
}
static struct clusterip_config *
@@ -167,14 +169,13 @@
/* create proc dir entry */
sprintf(buffer, "%u.%u.%u.%u", NIPQUAD(ip));
- c->pde = create_proc_entry(buffer, S_IWUSR|S_IRUSR,
- clusterip_procdir);
+ c->pde = proc_create(buffer, S_IWUSR|S_IRUSR,
+ clusterip_procdir, &clusterip_proc_fops);
if (!c->pde) {
kfree(c);
return NULL;
}
}
- c->pde->proc_fops = &clusterip_proc_fops;
c->pde->data = c;
#endif
diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c
index 8e8f042..50e0669 100644
--- a/net/ipv4/netfilter/ipt_recent.c
+++ b/net/ipv4/netfilter/ipt_recent.c
@@ -276,12 +276,11 @@
for (i = 0; i < ip_list_hash_size; i++)
INIT_LIST_HEAD(&t->iphash[i]);
#ifdef CONFIG_PROC_FS
- t->proc = create_proc_entry(t->name, ip_list_perms, proc_dir);
+ t->proc = proc_create(t->name, ip_list_perms, proc_dir, &recent_fops);
if (t->proc == NULL) {
kfree(t);
goto out;
}
- t->proc->proc_fops = &recent_fops;
t->proc->uid = ip_list_uid;
t->proc->gid = ip_list_gid;
t->proc->data = t;
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
index 089252e..f500b0f 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
@@ -395,13 +395,10 @@
if (!proc_exp)
goto err2;
- proc_stat = create_proc_entry("ip_conntrack", S_IRUGO, init_net.proc_net_stat);
+ proc_stat = proc_create("ip_conntrack", S_IRUGO,
+ init_net.proc_net_stat, &ct_cpu_seq_fops);
if (!proc_stat)
goto err3;
-
- proc_stat->proc_fops = &ct_cpu_seq_fops;
- proc_stat->owner = THIS_MODULE;
-
return 0;
err3:
diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c
index 0d5fa3a..36b4e3b 100644
--- a/net/ipv4/netfilter/nf_nat_core.c
+++ b/net/ipv4/netfilter/nf_nat_core.c
@@ -629,6 +629,8 @@
size_t i;
int ret;
+ need_ipv4_conntrack();
+
ret = nf_ct_extend_register(&nat_extend);
if (ret < 0) {
printk(KERN_ERR "nf_nat_core: Unable to register extension\n");
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 7facdb0..bbb7d88 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1625,13 +1625,11 @@
return flag;
}
-/* If we receive more dupacks than we expected counting segments
- * in assumption of absent reordering, interpret this as reordering.
- * The only another reason could be bug in receiver TCP.
+/* Limits sacked_out so that sum with lost_out isn't ever larger than
+ * packets_out. Returns zero if sacked_out adjustement wasn't necessary.
*/
-static void tcp_check_reno_reordering(struct sock *sk, const int addend)
+int tcp_limit_reno_sacked(struct tcp_sock *tp)
{
- struct tcp_sock *tp = tcp_sk(sk);
u32 holes;
holes = max(tp->lost_out, 1U);
@@ -1639,8 +1637,20 @@
if ((tp->sacked_out + holes) > tp->packets_out) {
tp->sacked_out = tp->packets_out - holes;
- tcp_update_reordering(sk, tp->packets_out + addend, 0);
+ return 1;
}
+ return 0;
+}
+
+/* If we receive more dupacks than we expected counting segments
+ * in assumption of absent reordering, interpret this as reordering.
+ * The only another reason could be bug in receiver TCP.
+ */
+static void tcp_check_reno_reordering(struct sock *sk, const int addend)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ if (tcp_limit_reno_sacked(tp))
+ tcp_update_reordering(sk, tp->packets_out + addend, 0);
}
/* Emulate SACKs for SACKless connection: account for a new dupack. */
@@ -1681,11 +1691,16 @@
int tcp_use_frto(struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
+ const struct inet_connection_sock *icsk = inet_csk(sk);
struct sk_buff *skb;
if (!sysctl_tcp_frto)
return 0;
+ /* MTU probe and F-RTO won't really play nicely along currently */
+ if (icsk->icsk_mtup.probe_size)
+ return 0;
+
if (IsSackFrto())
return 1;
@@ -2134,11 +2149,13 @@
/* Mark head of queue up as lost. With RFC3517 SACK, the packets is
* is against sacked "cnt", otherwise it's against facked "cnt"
*/
-static void tcp_mark_head_lost(struct sock *sk, int packets, int fast_rexmit)
+static void tcp_mark_head_lost(struct sock *sk, int packets)
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *skb;
- int cnt;
+ int cnt, oldcnt;
+ int err;
+ unsigned int mss;
BUG_TRAP(packets <= tp->packets_out);
if (tp->lost_skb_hint) {
@@ -2157,13 +2174,25 @@
tp->lost_skb_hint = skb;
tp->lost_cnt_hint = cnt;
+ if (after(TCP_SKB_CB(skb)->end_seq, tp->high_seq))
+ break;
+
+ oldcnt = cnt;
if (tcp_is_fack(tp) || tcp_is_reno(tp) ||
(TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED))
cnt += tcp_skb_pcount(skb);
- if (((!fast_rexmit || (tp->lost_out > 0)) && (cnt > packets)) ||
- after(TCP_SKB_CB(skb)->end_seq, tp->high_seq))
- break;
+ if (cnt > packets) {
+ if (tcp_is_sack(tp) || (oldcnt >= packets))
+ break;
+
+ mss = skb_shinfo(skb)->gso_size;
+ err = tcp_fragment(sk, skb, (packets - oldcnt) * mss, mss);
+ if (err < 0)
+ break;
+ cnt = packets;
+ }
+
if (!(TCP_SKB_CB(skb)->sacked & (TCPCB_SACKED_ACKED|TCPCB_LOST))) {
TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
tp->lost_out += tcp_skb_pcount(skb);
@@ -2180,17 +2209,17 @@
struct tcp_sock *tp = tcp_sk(sk);
if (tcp_is_reno(tp)) {
- tcp_mark_head_lost(sk, 1, fast_rexmit);
+ tcp_mark_head_lost(sk, 1);
} else if (tcp_is_fack(tp)) {
int lost = tp->fackets_out - tp->reordering;
if (lost <= 0)
lost = 1;
- tcp_mark_head_lost(sk, lost, fast_rexmit);
+ tcp_mark_head_lost(sk, lost);
} else {
int sacked_upto = tp->sacked_out - tp->reordering;
- if (sacked_upto < 0)
- sacked_upto = 0;
- tcp_mark_head_lost(sk, sacked_upto, fast_rexmit);
+ if (sacked_upto < fast_rexmit)
+ sacked_upto = fast_rexmit;
+ tcp_mark_head_lost(sk, sacked_upto);
}
/* New heuristics: it is possible only after we switched
@@ -2524,7 +2553,7 @@
before(tp->snd_una, tp->high_seq) &&
icsk->icsk_ca_state != TCP_CA_Open &&
tp->fackets_out > tp->reordering) {
- tcp_mark_head_lost(sk, tp->fackets_out - tp->reordering, 0);
+ tcp_mark_head_lost(sk, tp->fackets_out - tp->reordering);
NET_INC_STATS_BH(LINUX_MIB_TCPLOSS);
}
@@ -2586,6 +2615,8 @@
case TCP_CA_Loss:
if (flag & FLAG_DATA_ACKED)
icsk->icsk_retransmits = 0;
+ if (tcp_is_reno(tp) && flag & FLAG_SND_UNA_ADVANCED)
+ tcp_reset_reno_sack(tp);
if (!tcp_try_undo_loss(sk)) {
tcp_moderate_cwnd(tp);
tcp_xmit_retransmit_queue(sk);
@@ -3810,8 +3841,28 @@
}
}
+static int tcp_prune_ofo_queue(struct sock *sk);
static int tcp_prune_queue(struct sock *sk);
+static inline int tcp_try_rmem_schedule(struct sock *sk, unsigned int size)
+{
+ if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf ||
+ !sk_rmem_schedule(sk, size)) {
+
+ if (tcp_prune_queue(sk) < 0)
+ return -1;
+
+ if (!sk_rmem_schedule(sk, size)) {
+ if (!tcp_prune_ofo_queue(sk))
+ return -1;
+
+ if (!sk_rmem_schedule(sk, size))
+ return -1;
+ }
+ }
+ return 0;
+}
+
static void tcp_data_queue(struct sock *sk, struct sk_buff *skb)
{
struct tcphdr *th = tcp_hdr(skb);
@@ -3861,12 +3912,9 @@
if (eaten <= 0) {
queue_and_out:
if (eaten < 0 &&
- (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf ||
- !sk_rmem_schedule(sk, skb->truesize))) {
- if (tcp_prune_queue(sk) < 0 ||
- !sk_rmem_schedule(sk, skb->truesize))
- goto drop;
- }
+ tcp_try_rmem_schedule(sk, skb->truesize))
+ goto drop;
+
skb_set_owner_r(skb, sk);
__skb_queue_tail(&sk->sk_receive_queue, skb);
}
@@ -3935,12 +3983,8 @@
TCP_ECN_check_ce(tp, skb);
- if (atomic_read(&sk->sk_rmem_alloc) > sk->sk_rcvbuf ||
- !sk_rmem_schedule(sk, skb->truesize)) {
- if (tcp_prune_queue(sk) < 0 ||
- !sk_rmem_schedule(sk, skb->truesize))
- goto drop;
- }
+ if (tcp_try_rmem_schedule(sk, skb->truesize))
+ goto drop;
/* Disable header prediction. */
tp->pred_flags = 0;
@@ -4167,6 +4211,32 @@
}
}
+/*
+ * Purge the out-of-order queue.
+ * Return true if queue was pruned.
+ */
+static int tcp_prune_ofo_queue(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ int res = 0;
+
+ if (!skb_queue_empty(&tp->out_of_order_queue)) {
+ NET_INC_STATS_BH(LINUX_MIB_OFOPRUNED);
+ __skb_queue_purge(&tp->out_of_order_queue);
+
+ /* Reset SACK state. A conforming SACK implementation will
+ * do the same at a timeout based retransmit. When a connection
+ * is in a sad state like this, we care only about integrity
+ * of the connection not performance.
+ */
+ if (tp->rx_opt.sack_ok)
+ tcp_sack_reset(&tp->rx_opt);
+ sk_mem_reclaim(sk);
+ res = 1;
+ }
+ return res;
+}
+
/* Reduce allocated memory if we can, trying to get
* the socket within its memory limits again.
*
@@ -4200,20 +4270,7 @@
/* Collapsing did not help, destructive actions follow.
* This must not ever occur. */
- /* First, purge the out_of_order queue. */
- if (!skb_queue_empty(&tp->out_of_order_queue)) {
- NET_INC_STATS_BH(LINUX_MIB_OFOPRUNED);
- __skb_queue_purge(&tp->out_of_order_queue);
-
- /* Reset SACK state. A conforming SACK implementation will
- * do the same at a timeout based retransmit. When a connection
- * is in a sad state like this, we care only about integrity
- * of the connection not performance.
- */
- if (tcp_is_sack(tp))
- tcp_sack_reset(&tp->rx_opt);
- sk_mem_reclaim(sk);
- }
+ tcp_prune_ofo_queue(sk);
if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf)
return 0;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 72b9350..d29ef79 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1808,6 +1808,9 @@
if (!lost)
return;
+ if (tcp_is_reno(tp))
+ tcp_limit_reno_sacked(tp);
+
tcp_verify_left_out(tp);
/* Don't muck with the congestion window here.
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 7ea1b67..1704c14 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1556,14 +1556,14 @@
__acquires(udp_hash_lock)
{
read_lock(&udp_hash_lock);
- return *pos ? udp_get_idx(seq, *pos-1) : (void *)1;
+ return *pos ? udp_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
}
static void *udp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct sock *sk;
- if (v == (void *)1)
+ if (v == SEQ_START_TOKEN)
sk = udp_get_idx(seq, 0);
else
sk = udp_get_next(seq, v);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 101e0e7..e08955b 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -371,25 +371,26 @@
*/
in6_dev_hold(ndev);
+#if defined(CONFIG_IPV6_SIT) || defined(CONFIG_IPV6_SIT_MODULE)
+ if (dev->type == ARPHRD_SIT && (dev->priv_flags & IFF_ISATAP)) {
+ printk(KERN_INFO
+ "%s: Disabled Multicast RS\n",
+ dev->name);
+ ndev->cnf.rtr_solicits = 0;
+ }
+#endif
+
#ifdef CONFIG_IPV6_PRIVACY
setup_timer(&ndev->regen_timer, ipv6_regen_rndid, (unsigned long)ndev);
if ((dev->flags&IFF_LOOPBACK) ||
dev->type == ARPHRD_TUNNEL ||
-#if defined(CONFIG_IPV6_SIT) || defined(CONFIG_IPV6_SIT_MODULE)
+ dev->type == ARPHRD_TUNNEL6 ||
dev->type == ARPHRD_SIT ||
-#endif
dev->type == ARPHRD_NONE) {
printk(KERN_INFO
"%s: Disabled Privacy Extensions\n",
dev->name);
ndev->cnf.use_tempaddr = -1;
-
- if (dev->type == ARPHRD_SIT && (dev->priv_flags & IFF_ISATAP)) {
- printk(KERN_INFO
- "%s: Disabled Multicast RS\n",
- dev->name);
- ndev->cnf.rtr_solicits = 0;
- }
} else {
in6_dev_hold(ndev);
ipv6_regen_rndid((unsigned long) ndev);
@@ -776,6 +777,7 @@
struct inet6_dev *idev = ifp->idev;
struct in6_addr addr, *tmpaddr;
unsigned long tmp_prefered_lft, tmp_valid_lft, tmp_cstamp, tmp_tstamp;
+ unsigned long regen_advance;
int tmp_plen;
int ret = 0;
int max_addresses;
@@ -836,8 +838,23 @@
tmp_tstamp = ifp->tstamp;
spin_unlock_bh(&ifp->lock);
+ regen_advance = idev->cnf.regen_max_retry *
+ idev->cnf.dad_transmits *
+ idev->nd_parms->retrans_time / HZ;
write_unlock(&idev->lock);
+ /* A temporary address is created only if this calculated Preferred
+ * Lifetime is greater than REGEN_ADVANCE time units. In particular,
+ * an implementation must not create a temporary address with a zero
+ * Preferred Lifetime.
+ */
+ if (tmp_prefered_lft <= regen_advance) {
+ in6_ifa_put(ifp);
+ in6_dev_put(idev);
+ ret = -1;
+ goto out;
+ }
+
addr_flags = IFA_F_TEMPORARY;
/* set in addrconf_prefix_rcv() */
if (ifp->flags & IFA_F_OPTIMISTIC)
@@ -1831,6 +1848,9 @@
* lifetimes of an existing temporary address
* when processing a Prefix Information Option.
*/
+ if (ifp != ift->ifpub)
+ continue;
+
spin_lock(&ift->lock);
flags = ift->flags;
if (ift->valid_lft > valid_lft &&
@@ -2437,7 +2457,7 @@
ASSERT_RTNL();
- if (dev == init_net.loopback_dev && how == 1)
+ if ((dev->flags & IFF_LOOPBACK) && how == 1)
how = 0;
rt6_ifdown(dev);
@@ -2450,7 +2470,7 @@
/* Step 1: remove reference to ipv6 device from parent device.
Do not dev_put!
*/
- if (how == 1) {
+ if (how) {
idev->dead = 1;
/* protected by rtnl_lock */
@@ -2482,12 +2502,12 @@
write_lock_bh(&idev->lock);
/* Step 3: clear flags for stateless addrconf */
- if (how != 1)
+ if (!how)
idev->if_flags &= ~(IF_RS_SENT|IF_RA_RCVD|IF_READY);
/* Step 4: clear address list */
#ifdef CONFIG_IPV6_PRIVACY
- if (how == 1 && del_timer(&idev->regen_timer))
+ if (how && del_timer(&idev->regen_timer))
in6_dev_put(idev);
/* clear tempaddr list */
@@ -2524,7 +2544,7 @@
/* Step 5: Discard multicast list */
- if (how == 1)
+ if (how)
ipv6_mc_destroy_dev(idev);
else
ipv6_mc_down(idev);
@@ -2533,7 +2553,7 @@
/* Shot the device (if unregistered) */
- if (how == 1) {
+ if (how) {
addrconf_sysctl_unregister(idev);
neigh_parms_release(&nd_tbl, idev->nd_parms);
neigh_ifdown(&nd_tbl, dev);
diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c
index 9c7f83f..e5f56c9 100644
--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -334,9 +334,7 @@
idev->ac_list = aca;
write_unlock_bh(&idev->lock);
- dst_hold(&rt->u.dst);
- if (ip6_ins_rt(rt))
- dst_release(&rt->u.dst);
+ ip6_ins_rt(rt);
addrconf_join_solict(dev, &aca->aca_addr);
@@ -378,10 +376,7 @@
addrconf_leave_solict(idev, &aca->aca_addr);
dst_hold(&aca->aca_rt->u.dst);
- if (ip6_del_rt(aca->aca_rt))
- dst_free(&aca->aca_rt->u.dst);
- else
- dst_release(&aca->aca_rt->u.dst);
+ ip6_del_rt(aca->aca_rt);
aca_put(aca);
return 0;
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index 0ec1402..c6bb4c6 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -282,7 +282,7 @@
struct scatterlist *sg;
struct scatterlist *asg;
- if (!pskb_may_pull(skb, sizeof(*esph))) {
+ if (!pskb_may_pull(skb, sizeof(*esph) + crypto_aead_ivsize(aead))) {
ret = -EINVAL;
goto out;
}
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 121d517..893287e 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -436,24 +436,26 @@
}
if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6))
- goto out;
+ goto relookup_failed;
if (ip6_dst_lookup(sk, &dst2, &fl))
- goto out;
+ goto relookup_failed;
err = xfrm_lookup(&dst2, &fl, sk, XFRM_LOOKUP_ICMP);
- if (err == -ENOENT) {
+ switch (err) {
+ case 0:
+ dst_release(dst);
+ dst = dst2;
+ break;
+ case -EPERM:
+ goto out_dst_release;
+ default:
+relookup_failed:
if (!dst)
goto out;
- goto route_done;
+ break;
}
- dst_release(dst);
- dst = dst2;
-
- if (err)
- goto out;
-
route_done:
if (ipv6_addr_is_multicast(&fl.fl6_dst))
hlimit = np->mcast_hops;
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 178aebc..98ab4f4 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -239,8 +239,7 @@
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
hdr = ipv6_hdr(skb);
- deliver = unlikely(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) ||
- ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
+ deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
/*
* IPv6 multicast router mode isnt currently supported.
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index cc2f9af..8d366f7 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -591,11 +591,9 @@
}
#ifdef CONFIG_PROC_FS
- proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
- if (proc) {
- proc->owner = THIS_MODULE;
- proc->proc_fops = &ip6_queue_proc_fops;
- } else {
+ proc = proc_create(IPQ_PROC_FS_NAME, 0, init_net.proc_net,
+ &ip6_queue_proc_fops);
+ if (!proc) {
printk(KERN_ERR "ip6_queue: failed to create proc entry\n");
goto cleanup_ipqnl;
}
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 2a0d698..24c0d03 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -171,7 +171,9 @@
static void nf_ct_frag6_evictor(void)
{
+ local_bh_disable();
inet_frag_evictor(&nf_init_frags, &nf_frags);
+ local_bh_enable();
}
static void nf_ct_frag6_expire(unsigned long data)
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 8897ccf..0a6fbc1 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -372,8 +372,10 @@
read_lock(&raw_v6_hashinfo.lock);
sk = sk_head(&raw_v6_hashinfo.ht[hash]);
if (sk != NULL) {
- saddr = &ipv6_hdr(skb)->saddr;
- daddr = &ipv6_hdr(skb)->daddr;
+ struct ipv6hdr *hdr = (struct ipv6hdr *) skb->data;
+
+ saddr = &hdr->saddr;
+ daddr = &hdr->daddr;
net = skb->dev->nd_net;
while ((sk = __raw_v6_lookup(net, sk, nexthdr, saddr, daddr,
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 46cf962..8c50eb4 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -155,6 +155,9 @@
struct sock *sk;
int rc = -ESOCKTNOSUPPORT;
+ if (!capable(CAP_NET_RAW))
+ return -EPERM;
+
if (net != &init_net)
return -EAFNOSUPPORT;
diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c
index 860140c..71a0022 100644
--- a/net/llc/llc_c_ac.c
+++ b/net/llc/llc_c_ac.c
@@ -198,7 +198,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -223,7 +223,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -249,7 +249,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -282,7 +282,8 @@
llc_pdu_decode_pf_bit(skb, &f_bit);
else
f_bit = 0;
- nskb = llc_alloc_frame(sk, llc->dev);
+ nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -306,7 +307,8 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -336,7 +338,8 @@
struct llc_sock *llc = llc_sk(sk);
llc_pdu_decode_pf_bit(skb, &f_bit);
- nskb = llc_alloc_frame(sk, llc->dev);
+ nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
@@ -424,7 +427,7 @@
struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -459,7 +462,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -483,7 +486,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -507,7 +510,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -531,7 +534,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -555,7 +558,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -579,7 +582,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -615,7 +618,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -639,7 +642,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -663,7 +666,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -688,7 +691,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -712,7 +715,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -736,7 +739,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -770,7 +773,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -799,7 +802,7 @@
u8 f_bit;
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
llc_pdu_decode_pf_bit(skb, &f_bit);
if (nskb) {
@@ -956,7 +959,7 @@
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
diff --git a/net/llc/llc_core.c b/net/llc/llc_core.c
index 248b590..50d5b10 100644
--- a/net/llc/llc_core.c
+++ b/net/llc/llc_core.c
@@ -25,8 +25,6 @@
LIST_HEAD(llc_sap_list);
DEFINE_RWLOCK(llc_sap_list_lock);
-unsigned char llc_station_mac_sa[ETH_ALEN];
-
/**
* llc_sap_alloc - allocates and initializes sap.
*
@@ -37,8 +35,8 @@
struct llc_sap *sap = kzalloc(sizeof(*sap), GFP_ATOMIC);
if (sap) {
+ /* sap->laddr.mac - leave as a null, it's filled by bind */
sap->state = LLC_SAP_STATE_ACTIVE;
- memcpy(sap->laddr.mac, llc_station_mac_sa, ETH_ALEN);
rwlock_init(&sap->sk_list.lock);
atomic_set(&sap->refcnt, 1);
}
@@ -167,10 +165,6 @@
if (dev != NULL)
dev = next_net_device(dev);
- if (dev != NULL)
- memcpy(llc_station_mac_sa, dev->dev_addr, ETH_ALEN);
- else
- memset(llc_station_mac_sa, 0, ETH_ALEN);
dev_add_pack(&llc_packet_type);
dev_add_pack(&llc_tr_packet_type);
return 0;
@@ -185,7 +179,6 @@
module_init(llc_init);
module_exit(llc_exit);
-EXPORT_SYMBOL(llc_station_mac_sa);
EXPORT_SYMBOL(llc_sap_list);
EXPORT_SYMBOL(llc_sap_list_lock);
EXPORT_SYMBOL(llc_sap_find);
diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c
index c40c9b2..bfd2567 100644
--- a/net/llc/llc_input.c
+++ b/net/llc/llc_input.c
@@ -117,8 +117,12 @@
skb_pull(skb, llc_len);
if (skb->protocol == htons(ETH_P_802_2)) {
__be16 pdulen = eth_hdr(skb)->h_proto;
- u16 data_size = ntohs(pdulen) - llc_len;
+ s32 data_size = ntohs(pdulen) - llc_len;
+ if (data_size < 0 ||
+ ((skb_tail_pointer(skb) -
+ (u8 *)pdu) - llc_len) < data_size)
+ return 0;
if (unlikely(pskb_trim_rcsum(skb, data_size)))
return 0;
}
diff --git a/net/llc/llc_pdu.c b/net/llc/llc_pdu.c
index fa83243..2e6cb79 100644
--- a/net/llc/llc_pdu.c
+++ b/net/llc/llc_pdu.c
@@ -241,7 +241,7 @@
FRMR_INFO_SET_PDU_INFO_2LONG_IND(frmr_info, vzyxw);
FRMR_INFO_SET_PDU_INVALID_Nr_IND(frmr_info, vzyxw);
FRMR_INFO_SET_PDU_INVALID_Ns_IND(frmr_info, vzyxw);
- skb_put(skb, 5);
+ skb_put(skb, sizeof(struct llc_frmr_info));
}
/**
diff --git a/net/llc/llc_s_ac.c b/net/llc/llc_s_ac.c
index ac3d93b..a94bd56 100644
--- a/net/llc/llc_s_ac.c
+++ b/net/llc/llc_s_ac.c
@@ -103,7 +103,8 @@
llc_pdu_decode_sa(skb, mac_da);
llc_pdu_decode_da(skb, mac_sa);
llc_pdu_decode_ssap(skb, &dsap);
- nskb = llc_alloc_frame(NULL, skb->dev);
+ nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_xid_info));
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
@@ -144,11 +145,15 @@
u8 mac_da[ETH_ALEN], mac_sa[ETH_ALEN], dsap;
struct sk_buff *nskb;
int rc = 1;
+ u32 data_size;
llc_pdu_decode_sa(skb, mac_da);
llc_pdu_decode_da(skb, mac_sa);
llc_pdu_decode_ssap(skb, &dsap);
- nskb = llc_alloc_frame(NULL, skb->dev);
+
+ /* The test request command is type U (llc_len = 3) */
+ data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
+ nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c
index 2525165..e2ddde7 100644
--- a/net/llc/llc_sap.c
+++ b/net/llc/llc_sap.c
@@ -24,20 +24,41 @@
#include <net/tcp_states.h>
#include <linux/llc.h>
+static int llc_mac_header_len(unsigned short devtype)
+{
+ switch (devtype) {
+ case ARPHRD_ETHER:
+ case ARPHRD_LOOPBACK:
+ return sizeof(struct ethhdr);
+#ifdef CONFIG_TR
+ case ARPHRD_IEEE802_TR:
+ return sizeof(struct trh_hdr);
+#endif
+ }
+ return 0;
+}
+
/**
* llc_alloc_frame - allocates sk_buff for frame
* @dev: network device this skb will be sent over
+ * @type: pdu type to allocate
+ * @data_size: data size to allocate
*
* Allocates an sk_buff for frame and initializes sk_buff fields.
* Returns allocated skb or %NULL when out of memory.
*/
-struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev)
+struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+ u8 type, u32 data_size)
{
- struct sk_buff *skb = alloc_skb(128, GFP_ATOMIC);
+ int hlen = type == LLC_PDU_TYPE_U ? 3 : 4;
+ struct sk_buff *skb;
+
+ hlen += llc_mac_header_len(dev->type);
+ skb = alloc_skb(hlen + data_size, GFP_ATOMIC);
if (skb) {
skb_reset_mac_header(skb);
- skb_reserve(skb, 50);
+ skb_reserve(skb, hlen);
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
skb->protocol = htons(ETH_P_802_2);
diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c
index 6f2ea20..83da133 100644
--- a/net/llc/llc_station.c
+++ b/net/llc/llc_station.c
@@ -253,13 +253,14 @@
static int llc_station_ac_send_null_dsap_xid_c(struct sk_buff *skb)
{
int rc = 1;
- struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
+ struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_xid_info));
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, 0, LLC_PDU_CMD);
llc_pdu_init_as_xid_cmd(nskb, LLC_XID_NULL_CLASS_2, 127);
- rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, llc_station_mac_sa);
+ rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, skb->dev->dev_addr);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
@@ -274,7 +275,8 @@
{
u8 mac_da[ETH_ALEN], dsap;
int rc = 1;
- struct sk_buff* nskb = llc_alloc_frame(NULL, skb->dev);
+ struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_xid_info));
if (!nskb)
goto out;
@@ -283,7 +285,7 @@
llc_pdu_decode_ssap(skb, &dsap);
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
llc_pdu_init_as_xid_rsp(nskb, LLC_XID_NULL_CLASS_2, 127);
- rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
+ rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
@@ -298,7 +300,12 @@
{
u8 mac_da[ETH_ALEN], dsap;
int rc = 1;
- struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
+ u32 data_size;
+ struct sk_buff *nskb;
+
+ /* The test request command is type U (llc_len = 3) */
+ data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
+ nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
if (!nskb)
goto out;
@@ -307,7 +314,7 @@
llc_pdu_decode_ssap(skb, &dsap);
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
llc_pdu_init_as_test_rsp(nskb, skb);
- rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
+ rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index 28bcdf9..8e58639 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -286,6 +286,18 @@
if (need_hw_reconfig)
ieee80211_hw_config(local);
+ /*
+ * ieee80211_sta_work is disabled while network interface
+ * is down. Therefore, some configuration changes may not
+ * yet be effective. Trigger execution of ieee80211_sta_work
+ * to fix this.
+ */
+ if(sdata->vif.type == IEEE80211_IF_TYPE_STA ||
+ sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
+ struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+ queue_work(local->hw.workqueue, &ifsta->work);
+ }
+
netif_start_queue(dev);
return 0;
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 9aeed53..c170685 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -312,14 +312,12 @@
}
}
-
-static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
- u8 erp_value)
+static u32 ieee80211_handle_protect_preamb(struct ieee80211_sub_if_data *sdata,
+ bool use_protection,
+ bool use_short_preamble)
{
struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf;
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
- bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
- bool preamble_mode = (erp_value & WLAN_ERP_BARKER_PREAMBLE) != 0;
DECLARE_MAC_BUF(mac);
u32 changed = 0;
@@ -335,22 +333,47 @@
changed |= BSS_CHANGED_ERP_CTS_PROT;
}
- if (preamble_mode != bss_conf->use_short_preamble) {
+ if (use_short_preamble != bss_conf->use_short_preamble) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: switched to %s barker preamble"
" (BSSID=%s)\n",
sdata->dev->name,
- (preamble_mode == WLAN_ERP_PREAMBLE_SHORT) ?
- "short" : "long",
+ use_short_preamble ? "short" : "long",
print_mac(mac, ifsta->bssid));
}
- bss_conf->use_short_preamble = preamble_mode;
+ bss_conf->use_short_preamble = use_short_preamble;
changed |= BSS_CHANGED_ERP_PREAMBLE;
}
return changed;
}
+static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
+ u8 erp_value)
+{
+ bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
+ bool use_short_preamble = (erp_value & WLAN_ERP_BARKER_PREAMBLE) == 0;
+
+ return ieee80211_handle_protect_preamb(sdata,
+ use_protection, use_short_preamble);
+}
+
+static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_sta_bss *bss)
+{
+ u32 changed = 0;
+
+ if (bss->has_erp_value)
+ changed |= ieee80211_handle_erp_ie(sdata, bss->erp_value);
+ else {
+ u16 capab = bss->capability;
+ changed |= ieee80211_handle_protect_preamb(sdata, false,
+ (capab & WLAN_CAPABILITY_SHORT_PREAMBLE) != 0);
+ }
+
+ return changed;
+}
+
int ieee80211_ht_cap_ie_to_ht_info(struct ieee80211_ht_cap *ht_cap_ie,
struct ieee80211_ht_info *ht_info)
{
@@ -469,9 +492,7 @@
local->hw.conf.channel,
ifsta->ssid, ifsta->ssid_len);
if (bss) {
- if (bss->has_erp_value)
- changed |= ieee80211_handle_erp_ie(
- sdata, bss->erp_value);
+ changed |= ieee80211_handle_bss_capability(sdata, bss);
ieee80211_rx_bss_put(dev, bss);
}
@@ -2117,6 +2138,11 @@
if (elems.erp_info && elems.erp_info_len >= 1)
changed |= ieee80211_handle_erp_ie(sdata, elems.erp_info[0]);
+ else {
+ u16 capab = le16_to_cpu(mgmt->u.beacon.capab_info);
+ changed |= ieee80211_handle_protect_preamb(sdata, false,
+ (capab & WLAN_CAPABILITY_SHORT_PREAMBLE) != 0);
+ }
if (elems.ht_cap_elem && elems.ht_info_elem &&
elems.wmm_param && local->ops->conf_ht &&
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 535407d..a8a40ab 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1050,12 +1050,9 @@
if (unlikely(!(rx->fc & IEEE80211_FCTL_PROTECTED) &&
(rx->fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA &&
(rx->fc & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_NULLFUNC &&
- (rx->key || rx->sdata->drop_unencrypted))) {
- if (net_ratelimit())
- printk(KERN_DEBUG "%s: RX non-WEP frame, but expected "
- "encryption\n", rx->dev->name);
+ (rx->key || rx->sdata->drop_unencrypted)))
return -EACCES;
- }
+
return 0;
}
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index e88e96a..8599068 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -395,7 +395,7 @@
static int __init nf_conntrack_standalone_init(void)
{
#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *proc, *proc_stat;
+ struct proc_dir_entry *proc;
#endif
int ret = 0;
@@ -407,12 +407,9 @@
proc = proc_net_fops_create(&init_net, "nf_conntrack", 0440, &ct_file_ops);
if (!proc) goto cleanup_init;
- proc_stat = create_proc_entry("nf_conntrack", S_IRUGO, init_net.proc_net_stat);
- if (!proc_stat)
+ if (!proc_create("nf_conntrack", S_IRUGO,
+ init_net.proc_net_stat, &ct_cpu_seq_fops))
goto cleanup_proc;
-
- proc_stat->proc_fops = &ct_cpu_seq_fops;
- proc_stat->owner = THIS_MODULE;
#endif
#ifdef CONFIG_SYSCTL
nf_ct_sysctl_header = register_sysctl_paths(nf_ct_path,
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index cec9976..bc11d70 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -168,13 +168,9 @@
int __init netfilter_log_init(void)
{
#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *pde;
-
- pde = create_proc_entry("nf_log", S_IRUGO, proc_net_netfilter);
- if (!pde)
+ if (!proc_create("nf_log", S_IRUGO,
+ proc_net_netfilter, &nflog_file_ops))
return -1;
-
- pde->proc_fops = &nflog_file_ops;
#endif
return 0;
}
diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index ddc80ea..bbd2689 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -348,12 +348,9 @@
int __init netfilter_queue_init(void)
{
#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *pde;
-
- pde = create_proc_entry("nf_queue", S_IRUGO, proc_net_netfilter);
- if (!pde)
+ if (!proc_create("nf_queue", S_IRUGO,
+ proc_net_netfilter, &nfqueue_file_ops))
return -1;
- pde->proc_fops = &nfqueue_file_ops;
#endif
return 0;
}
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index bf3f19b..b8173af 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -923,9 +923,6 @@
static int __init nfnetlink_log_init(void)
{
int i, status = -ENOMEM;
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *proc_nful;
-#endif
for (i = 0; i < INSTANCE_BUCKETS; i++)
INIT_HLIST_HEAD(&instance_table[i]);
@@ -943,11 +940,9 @@
}
#ifdef CONFIG_PROC_FS
- proc_nful = create_proc_entry("nfnetlink_log", 0440,
- proc_net_netfilter);
- if (!proc_nful)
+ if (!proc_create("nfnetlink_log", 0440,
+ proc_net_netfilter, &nful_file_ops))
goto cleanup_subsys;
- proc_nful->proc_fops = &nful_file_ops;
#endif
return status;
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 012cb69..10522c0 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -896,9 +896,6 @@
static int __init nfnetlink_queue_init(void)
{
int i, status = -ENOMEM;
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *proc_nfqueue;
-#endif
for (i = 0; i < INSTANCE_BUCKETS; i++)
INIT_HLIST_HEAD(&instance_table[i]);
@@ -911,11 +908,9 @@
}
#ifdef CONFIG_PROC_FS
- proc_nfqueue = create_proc_entry("nfnetlink_queue", 0440,
- proc_net_netfilter);
- if (!proc_nfqueue)
+ if (!proc_create("nfnetlink_queue", 0440,
+ proc_net_netfilter, &nfqnl_file_ops))
goto cleanup_subsys;
- proc_nfqueue->proc_fops = &nfqnl_file_ops;
#endif
register_netdevice_notifier(&nfqnl_dev_notifier);
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c
index 5418ce5..40d344b 100644
--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -237,14 +237,14 @@
hinfo->family = family;
hinfo->rnd_initialized = 0;
spin_lock_init(&hinfo->lock);
- hinfo->pde = create_proc_entry(minfo->name, 0,
- family == AF_INET ? hashlimit_procdir4 :
- hashlimit_procdir6);
+ hinfo->pde = proc_create(minfo->name, 0,
+ family == AF_INET ? hashlimit_procdir4 :
+ hashlimit_procdir6,
+ &dl_file_ops);
if (!hinfo->pde) {
vfree(hinfo);
return -1;
}
- hinfo->pde->proc_fops = &dl_file_ops;
hinfo->pde->data = hinfo;
setup_timer(&hinfo->timer, htable_gc, (unsigned long )hinfo);
@@ -301,14 +301,14 @@
hinfo->rnd_initialized = 0;
spin_lock_init(&hinfo->lock);
- hinfo->pde = create_proc_entry(minfo->name, 0,
- family == AF_INET ? hashlimit_procdir4 :
- hashlimit_procdir6);
+ hinfo->pde = proc_create(minfo->name, 0,
+ family == AF_INET ? hashlimit_procdir4 :
+ hashlimit_procdir6,
+ &dl_file_ops);
if (hinfo->pde == NULL) {
vfree(hinfo);
return -1;
}
- hinfo->pde->proc_fops = &dl_file_ops;
hinfo->pde->data = hinfo;
setup_timer(&hinfo->timer, htable_gc, (unsigned long)hinfo);
@@ -466,38 +466,25 @@
static inline __be32 maskl(__be32 a, unsigned int l)
{
- return htonl(ntohl(a) & ~(~(u_int32_t)0 >> l));
+ return l ? htonl(ntohl(a) & ~0 << (32 - l)) : 0;
}
#if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
static void hashlimit_ipv6_mask(__be32 *i, unsigned int p)
{
switch (p) {
- case 0:
- i[0] = i[1] = 0;
- i[2] = i[3] = 0;
- break;
- case 1 ... 31:
+ case 0 ... 31:
i[0] = maskl(i[0], p);
i[1] = i[2] = i[3] = 0;
break;
- case 32:
- i[1] = i[2] = i[3] = 0;
- break;
- case 33 ... 63:
+ case 32 ... 63:
i[1] = maskl(i[1], p - 32);
i[2] = i[3] = 0;
break;
- case 64:
- i[2] = i[3] = 0;
- break;
- case 65 ... 95:
+ case 64 ... 95:
i[2] = maskl(i[2], p - 64);
i[3] = 0;
- case 96:
- i[3] = 0;
- break;
- case 97 ... 127:
+ case 96 ... 127:
i[3] = maskl(i[3], p - 96);
break;
case 128:
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index 140a0a8..4e10a95 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c
@@ -92,7 +92,7 @@
rfkill_states[type] = state;
list_for_each_entry(rfkill, &rfkill_list, node) {
- if (!rfkill->user_claim)
+ if ((!rfkill->user_claim) && (rfkill->type == type))
rfkill_toggle_radio(rfkill, state);
}
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 4a31a81..063cbc5 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -598,17 +598,24 @@
if (sk == NULL) return 0;
+ sock_hold(sk);
+ sock_orphan(sk);
+ lock_sock(sk);
rose = rose_sk(sk);
switch (rose->state) {
case ROSE_STATE_0:
+ release_sock(sk);
rose_disconnect(sk, 0, -1, -1);
+ lock_sock(sk);
rose_destroy_socket(sk);
break;
case ROSE_STATE_2:
rose->neighbour->use--;
+ release_sock(sk);
rose_disconnect(sk, 0, -1, -1);
+ lock_sock(sk);
rose_destroy_socket(sk);
break;
@@ -633,6 +640,8 @@
}
sock->sk = NULL;
+ release_sock(sk);
+ sock_put(sk);
return 0;
}
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index 2d0c29c..4b2682f 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -27,7 +27,7 @@
unsigned rxrpc_debug; // = RXRPC_DEBUG_KPROTO;
module_param_named(debug, rxrpc_debug, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(rxrpc_debug, "RxRPC debugging mask");
+MODULE_PARM_DESC(debug, "RxRPC debugging mask");
static int sysctl_rxrpc_max_qlen __read_mostly = 10;
diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h
index 126ca77..53fe94c 100644
--- a/net/rxrpc/ar-internal.h
+++ b/net/rxrpc/ar-internal.h
@@ -611,7 +611,7 @@
extern unsigned rxrpc_debug;
#define dbgprintk(FMT,...) \
- printk("[%x%-6.6s] "FMT"\n", smp_processor_id(), current->comm ,##__VA_ARGS__)
+ printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
/* make sure we maintain the format strings, even when debugging is disabled */
static inline __attribute__((format(printf,1,2)))
diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c
index d1c296f..6d38a81 100644
--- a/net/rxrpc/rxkad.c
+++ b/net/rxrpc/rxkad.c
@@ -31,7 +31,7 @@
unsigned rxrpc_debug;
module_param_named(debug, rxrpc_debug, uint, S_IWUSR | S_IRUGO);
-MODULE_PARM_DESC(rxrpc_debug, "rxkad debugging mask");
+MODULE_PARM_DESC(debug, "rxkad debugging mask");
struct rxkad_level1_hdr {
__be32 data_size; /* true data size (excluding padding) */
diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index c5c16b4..4d75544 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -411,8 +411,10 @@
}
}
- for (ht=tp_c->hlist; ht; ht = ht->next)
+ for (ht = tp_c->hlist; ht; ht = ht->next) {
+ ht->refcnt--;
u32_clear_hnode(tp, ht);
+ }
while ((ht = tp_c->hlist) != NULL) {
tp_c->hlist = ht->next;
@@ -441,8 +443,12 @@
if (tp->root == ht)
return -EINVAL;
- if (--ht->refcnt == 0)
+ if (ht->refcnt == 1) {
+ ht->refcnt--;
u32_destroy_hnode(tp, ht);
+ } else {
+ return -EBUSY;
+ }
return 0;
}
@@ -568,7 +574,7 @@
if (ht == NULL)
return -ENOBUFS;
ht->tp_c = tp_c;
- ht->refcnt = 0;
+ ht->refcnt = 1;
ht->divisor = divisor;
ht->handle = handle;
ht->prio = tp->prio;
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 7e3c048..fc8708a 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -386,6 +386,9 @@
if (n == 0)
return;
while ((parentid = sch->parent)) {
+ if (TC_H_MAJ(parentid) == TC_H_MAJ(TC_H_INGRESS))
+ return;
+
sch = qdisc_lookup(sch->dev, TC_H_MAJ(parentid));
if (sch == NULL) {
WARN_ON(parentid != TC_H_ROOT);
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 10b5c08..b741618 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -184,10 +184,22 @@
void __qdisc_run(struct net_device *dev)
{
- do {
- if (!qdisc_restart(dev))
+ unsigned long start_time = jiffies;
+
+ while (qdisc_restart(dev)) {
+ if (netif_queue_stopped(dev))
break;
- } while (!netif_queue_stopped(dev));
+
+ /*
+ * Postpone processing if
+ * 1. another process needs the CPU;
+ * 2. we've been doing it for too long.
+ */
+ if (need_resched() || jiffies != start_time) {
+ netif_schedule(dev);
+ break;
+ }
+ }
clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
}
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index b1e05d7..85f1495 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -110,8 +110,9 @@
spin_lock_bh(&sctp_local_addr_lock);
list_for_each_entry_safe(addr, temp,
&sctp_local_addr_list, list) {
- if (ipv6_addr_equal(&addr->a.v6.sin6_addr,
- &ifa->addr)) {
+ if (addr->a.sa.sa_family == AF_INET6 &&
+ ipv6_addr_equal(&addr->a.v6.sin6_addr,
+ &ifa->addr)) {
found = 1;
addr->valid = 0;
list_del_rcu(&addr->list);
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 1bb3c5c..c071446 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -793,6 +793,9 @@
break;
case SCTP_CID_ABORT:
+ if (sctp_test_T_bit(chunk)) {
+ packet->vtag = asoc->c.my_vtag;
+ }
case SCTP_CID_SACK:
case SCTP_CID_HEARTBEAT:
case SCTP_CID_HEARTBEAT_ACK:
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index f90091a..c2dd65d 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -647,7 +647,9 @@
spin_lock_bh(&sctp_local_addr_lock);
list_for_each_entry_safe(addr, temp,
&sctp_local_addr_list, list) {
- if (addr->a.v4.sin_addr.s_addr == ifa->ifa_local) {
+ if (addr->a.sa.sa_family == AF_INET &&
+ addr->a.v4.sin_addr.s_addr ==
+ ifa->ifa_local) {
found = 1;
addr->valid = 0;
list_del_rcu(&addr->list);
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 578630e..36ebb39 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -1982,7 +1982,10 @@
struct sctp_chunk *chunk,
struct sctp_chunk **err_chunk)
{
+ struct sctp_hmac_algo_param *hmacs;
int retval = SCTP_IERROR_NO_ERROR;
+ __u16 n_elt, id = 0;
+ int i;
/* FIXME - This routine is not looking at each parameter per the
* chunk type, i.e., unrecognized parameters should be further
@@ -2056,9 +2059,29 @@
break;
case SCTP_PARAM_HMAC_ALGO:
- if (sctp_auth_enable)
- break;
- /* Fall Through */
+ if (!sctp_auth_enable)
+ goto fallthrough;
+
+ hmacs = (struct sctp_hmac_algo_param *)param.p;
+ n_elt = (ntohs(param.p->length) - sizeof(sctp_paramhdr_t)) >> 1;
+
+ /* SCTP-AUTH: Section 6.1
+ * The HMAC algorithm based on SHA-1 MUST be supported and
+ * included in the HMAC-ALGO parameter.
+ */
+ for (i = 0; i < n_elt; i++) {
+ id = ntohs(hmacs->hmac_ids[i]);
+
+ if (id == SCTP_AUTH_HMAC_ID_SHA1)
+ break;
+ }
+
+ if (id != SCTP_AUTH_HMAC_ID_SHA1) {
+ sctp_process_inv_paramlength(asoc, param.p, chunk,
+ err_chunk);
+ retval = SCTP_IERROR_ABORT;
+ }
+ break;
fallthrough:
default:
SCTP_DEBUG_PRINTK("Unrecognized param: %d for chunk %d.\n",
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 28eb38e..a4763fd 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -1536,6 +1536,9 @@
error = sctp_auth_asoc_init_active_key(asoc,
GFP_ATOMIC);
break;
+ case SCTP_CMD_UPDATE_INITTAG:
+ asoc->peer.i.init_tag = cmd->obj.u32;
+ break;
default:
printk(KERN_WARNING "Impossible command: %u, %p\n",
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index f2ed647..07194c2 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -4144,6 +4144,24 @@
goto nomem;
if (asoc) {
+ /* Treat INIT-ACK as a special case during COOKIE-WAIT. */
+ if (chunk->chunk_hdr->type == SCTP_CID_INIT_ACK &&
+ !asoc->peer.i.init_tag) {
+ sctp_initack_chunk_t *initack;
+
+ initack = (sctp_initack_chunk_t *)chunk->chunk_hdr;
+ if (!sctp_chunk_length_valid(chunk,
+ sizeof(sctp_initack_chunk_t)))
+ abort->chunk_hdr->flags |= SCTP_CHUNK_FLAG_T;
+ else {
+ unsigned int inittag;
+
+ inittag = ntohl(initack->init_hdr.init_tag);
+ sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_INITTAG,
+ SCTP_U32(inittag));
+ }
+ }
+
sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(abort));
SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS);
@@ -4349,6 +4367,7 @@
sctp_cmd_seq_t *commands)
{
struct sctp_chunk *repl;
+ struct sctp_association* my_asoc;
/* The comment below says that we enter COOKIE-WAIT AFTER
* sending the INIT, but that doesn't actually work in our
@@ -4372,8 +4391,8 @@
/* Cast away the const modifier, as we want to just
* rerun it through as a sideffect.
*/
- sctp_add_cmd_sf(commands, SCTP_CMD_NEW_ASOC,
- SCTP_ASOC((struct sctp_association *) asoc));
+ my_asoc = (struct sctp_association *)asoc;
+ sctp_add_cmd_sf(commands, SCTP_CMD_NEW_ASOC, SCTP_ASOC(my_asoc));
/* Choose transport for INIT. */
sctp_add_cmd_sf(commands, SCTP_CMD_INIT_CHOOSE_TRANSPORT,
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index d994d82..998e63a 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -5868,11 +5868,12 @@
sctp_cmsgs_t *cmsgs)
{
struct cmsghdr *cmsg;
+ struct msghdr *my_msg = (struct msghdr *)msg;
for (cmsg = CMSG_FIRSTHDR(msg);
cmsg != NULL;
- cmsg = CMSG_NXTHDR((struct msghdr*)msg, cmsg)) {
- if (!CMSG_OK(msg, cmsg))
+ cmsg = CMSG_NXTHDR(my_msg, cmsg)) {
+ if (!CMSG_OK(my_msg, cmsg))
return -EINVAL;
/* Should we parse this header or ignore? */
diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c
index b43f1f1..ce6cda6 100644
--- a/net/sctp/ulpevent.c
+++ b/net/sctp/ulpevent.c
@@ -859,7 +859,7 @@
union sctp_notification *notification;
struct sk_buff *skb;
- skb = sctp_event2skb((struct sctp_ulpevent *)event);
+ skb = sctp_event2skb(event);
notification = (union sctp_notification *) skb->data;
return notification->sn_header.sn_type;
}
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 8c6a7f1..8834d68 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -261,10 +261,6 @@
};
char servername[48];
- xprt = xprt_create_transport(&xprtargs);
- if (IS_ERR(xprt))
- return (struct rpc_clnt *)xprt;
-
/*
* If the caller chooses not to specify a hostname, whip
* up a string representation of the passed-in address.
diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c
index 995c3fd..79a55d5 100644
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -244,7 +244,7 @@
pgto = pages + (pgbase >> PAGE_CACHE_SHIFT);
pgbase &= ~PAGE_CACHE_MASK;
- do {
+ for (;;) {
copy = PAGE_CACHE_SIZE - pgbase;
if (copy > len)
copy = len;
@@ -253,6 +253,10 @@
memcpy(vto + pgbase, p, copy);
kunmap_atomic(vto, KM_USER0);
+ len -= copy;
+ if (len == 0)
+ break;
+
pgbase += copy;
if (pgbase == PAGE_CACHE_SIZE) {
flush_dcache_page(*pgto);
@@ -260,8 +264,7 @@
pgto++;
}
p += copy;
-
- } while ((len -= copy) != 0);
+ }
flush_dcache_page(*pgto);
}
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index ffbf22a..8ea283e 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -1573,7 +1573,6 @@
send_wr.sg_list = req->rl_send_iov;
send_wr.num_sge = req->rl_niovs;
send_wr.opcode = IB_WR_SEND;
- send_wr.imm_data = 0;
if (send_wr.num_sge == 4) /* no need to sync any pad (constant) */
ib_dma_sync_single_for_device(ia->ri_id->device,
req->rl_send_iov[3].addr, req->rl_send_iov[3].length,
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index e3a214f..f68a5c8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -945,7 +945,7 @@
nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
- params.listen_interval = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+ params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
if (parse_station_flags(info->attrs[NL80211_ATTR_STA_FLAGS],
¶ms.station_flags))
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 5d96f27..019d21d 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -288,7 +288,7 @@
memcpy(&x->props.saddr, &p->saddr, sizeof(x->props.saddr));
x->props.flags = p->flags;
- if (x->props.mode == XFRM_MODE_TRANSPORT)
+ if (!x->sel.family)
x->sel.family = p->family;
}
diff --git a/security/Kconfig b/security/Kconfig
index 5dfc206..49b51f9 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -113,10 +113,12 @@
from userspace allocation. Keeping a user from writing to low pages
can help reduce the impact of kernel NULL pointer bugs.
- For most users with lots of address space a value of 65536 is
- reasonable and should cause no problems. Programs which use vm86
- functionality would either need additional permissions from either
- the LSM or the capabilities module or have this protection disabled.
+ For most ia64, ppc64 and x86 users with lots of address space
+ a value of 65536 is reasonable and should cause no problems.
+ On arm and other archs it should not be higher than 32768.
+ Programs which use vm86 functionality would either need additional
+ permissions from either the LSM or the capabilities module or have
+ this protection disabled.
This value can be changed after boot using the
/proc/sys/vm/mmap_min_addr tunable.
diff --git a/security/commoncap.c b/security/commoncap.c
index 06d5c94..8529057 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -267,7 +267,7 @@
rc = cap_from_disk(&vcaps, bprm, rc);
if (rc)
printk(KERN_NOTICE "%s: cap_from_disk returned %d for %s\n",
- __FUNCTION__, rc, bprm->filename);
+ __func__, rc, bprm->filename);
out:
dput(dentry);
@@ -302,7 +302,7 @@
ret = get_file_caps(bprm);
if (ret)
printk(KERN_NOTICE "%s: get_file_caps returned %d for %s\n",
- __FUNCTION__, ret, bprm->filename);
+ __func__, ret, bprm->filename);
/* To support inheritance of root-permissions and suid-root
* executables under compatibility mode, we raise all three
diff --git a/security/keys/internal.h b/security/keys/internal.h
index d36d693..7d894ef 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -22,16 +22,16 @@
#ifdef __KDEBUG
#define kenter(FMT, ...) \
- printk(KERN_DEBUG "==> %s("FMT")\n", __FUNCTION__, ##__VA_ARGS__)
+ printk(KERN_DEBUG "==> %s("FMT")\n", __func__, ##__VA_ARGS__)
#define kleave(FMT, ...) \
- printk(KERN_DEBUG "<== %s()"FMT"\n", __FUNCTION__, ##__VA_ARGS__)
+ printk(KERN_DEBUG "<== %s()"FMT"\n", __func__, ##__VA_ARGS__)
#define kdebug(FMT, ...) \
printk(KERN_DEBUG "xxx" FMT"yyy\n", ##__VA_ARGS__)
#else
#define kenter(FMT, ...) \
- no_printk(KERN_DEBUG "==> %s("FMT")\n", __FUNCTION__, ##__VA_ARGS__)
+ no_printk(KERN_DEBUG "==> %s("FMT")\n", __func__, ##__VA_ARGS__)
#define kleave(FMT, ...) \
- no_printk(KERN_DEBUG "<== %s()"FMT"\n", __FUNCTION__, ##__VA_ARGS__)
+ no_printk(KERN_DEBUG "<== %s()"FMT"\n", __func__, ##__VA_ARGS__)
#define kdebug(FMT, ...) \
no_printk(KERN_DEBUG FMT"\n", ##__VA_ARGS__)
#endif
diff --git a/security/root_plug.c b/security/root_plug.c
index 870f130..6112d14 100644
--- a/security/root_plug.c
+++ b/security/root_plug.c
@@ -49,7 +49,7 @@
do { \
if (debug) \
printk(KERN_DEBUG "%s: %s: " fmt , \
- MY_NAME , __FUNCTION__ , \
+ MY_NAME , __func__ , \
## arg); \
} while (0)
diff --git a/security/security.c b/security/security.c
index b1387a6..9beecac 100644
--- a/security/security.c
+++ b/security/security.c
@@ -57,7 +57,7 @@
if (verify(&dummy_security_ops)) {
printk(KERN_ERR "%s could not verify "
- "dummy_security_ops structure.\n", __FUNCTION__);
+ "dummy_security_ops structure.\n", __func__);
return -EIO;
}
@@ -82,7 +82,7 @@
{
if (verify(ops)) {
printk(KERN_DEBUG "%s could not verify "
- "security_operations structure.\n", __FUNCTION__);
+ "security_operations structure.\n", __func__);
return -EINVAL;
}
@@ -110,13 +110,13 @@
{
if (verify(ops)) {
printk(KERN_INFO "%s could not verify "
- "security operations.\n", __FUNCTION__);
+ "security operations.\n", __func__);
return -EINVAL;
}
if (ops == security_ops) {
printk(KERN_INFO "%s security operations "
- "already registered.\n", __FUNCTION__);
+ "already registered.\n", __func__);
return -EINVAL;
}
diff --git a/security/selinux/Kconfig b/security/selinux/Kconfig
index 2b517d6..a436d1c 100644
--- a/security/selinux/Kconfig
+++ b/security/selinux/Kconfig
@@ -145,7 +145,7 @@
config SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE
int "NSA SELinux maximum supported policy format version value"
depends on SECURITY_SELINUX_POLICYDB_VERSION_MAX
- range 15 22
+ range 15 23
default 19
help
This option sets the value for the maximum policy format version
diff --git a/security/selinux/Makefile b/security/selinux/Makefile
index 00afd85..d47fc5e 100644
--- a/security/selinux/Makefile
+++ b/security/selinux/Makefile
@@ -11,6 +11,7 @@
nlmsgtab.o \
netif.o \
netnode.o \
+ netport.o \
exports.o
selinux-$(CONFIG_SECURITY_NETWORK_XFRM) += xfrm.o
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index 187964e..a4fc6e6 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -871,6 +871,8 @@
int rc = 0;
u32 denied;
+ BUG_ON(!requested);
+
rcu_read_lock();
node = avc_lookup(ssid, tsid, tclass, requested);
@@ -890,13 +892,14 @@
denied = requested & ~(p_ae->avd.allowed);
- if (!requested || denied) {
- if (selinux_enforcing || (flags & AVC_STRICT))
+ if (denied) {
+ if (flags & AVC_STRICT)
rc = -EACCES;
+ else if (!selinux_enforcing || security_permissive_sid(ssid))
+ avc_update_node(AVC_CALLBACK_GRANT, requested, ssid,
+ tsid, tclass);
else
- if (node)
- avc_update_node(AVC_CALLBACK_GRANT,requested,
- ssid,tsid,tclass);
+ rc = -EACCES;
}
rcu_read_unlock();
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 41a049f..34f2d46 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -80,6 +80,7 @@
#include "objsec.h"
#include "netif.h"
#include "netnode.h"
+#include "netport.h"
#include "xfrm.h"
#include "netlabel.h"
@@ -161,8 +162,7 @@
if (!tsec)
return -ENOMEM;
- tsec->task = task;
- tsec->osid = tsec->sid = tsec->ptrace_sid = SECINITSID_UNLABELED;
+ tsec->osid = tsec->sid = SECINITSID_UNLABELED;
task->security = tsec;
return 0;
@@ -180,7 +180,7 @@
struct task_security_struct *tsec = current->security;
struct inode_security_struct *isec;
- isec = kmem_cache_zalloc(sel_inode_cache, GFP_KERNEL);
+ isec = kmem_cache_zalloc(sel_inode_cache, GFP_NOFS);
if (!isec)
return -ENOMEM;
@@ -218,7 +218,6 @@
if (!fsec)
return -ENOMEM;
- fsec->file = file;
fsec->sid = tsec->sid;
fsec->fown_sid = tsec->sid;
file->f_security = fsec;
@@ -275,12 +274,11 @@
if (!ssec)
return -ENOMEM;
- ssec->sk = sk;
ssec->peer_sid = SECINITSID_UNLABELED;
ssec->sid = SECINITSID_UNLABELED;
sk->sk_security = ssec;
- selinux_netlbl_sk_security_init(ssec, family);
+ selinux_netlbl_sk_security_reset(ssec, family);
return 0;
}
@@ -324,10 +322,10 @@
};
static match_table_t tokens = {
- {Opt_context, "context=%s"},
- {Opt_fscontext, "fscontext=%s"},
- {Opt_defcontext, "defcontext=%s"},
- {Opt_rootcontext, "rootcontext=%s"},
+ {Opt_context, CONTEXT_STR "%s"},
+ {Opt_fscontext, FSCONTEXT_STR "%s"},
+ {Opt_defcontext, DEFCONTEXT_STR "%s"},
+ {Opt_rootcontext, ROOTCONTEXT_STR "%s"},
{Opt_error, NULL},
};
@@ -671,7 +669,7 @@
rc = security_fs_use(sb->s_type->name, &sbsec->behavior, &sbsec->sid);
if (rc) {
printk(KERN_WARNING "%s: security_fs_use(%s) returned %d\n",
- __FUNCTION__, sb->s_type->name, rc);
+ __func__, sb->s_type->name, rc);
goto out;
}
@@ -760,13 +758,13 @@
* this early in the boot process. */
BUG_ON(!ss_initialized);
- /* this might go away sometime down the line if there is a new user
- * of clone, but for now, nfs better not get here... */
- BUG_ON(newsbsec->initialized);
-
/* how can we clone if the old one wasn't set up?? */
BUG_ON(!oldsbsec->initialized);
+ /* if fs is reusing a sb, just let its options stand... */
+ if (newsbsec->initialized)
+ return;
+
mutex_lock(&newsbsec->lock);
newsbsec->flags = oldsbsec->flags;
@@ -1137,13 +1135,13 @@
}
if (!dentry) {
printk(KERN_WARNING "%s: no dentry for dev=%s "
- "ino=%ld\n", __FUNCTION__, inode->i_sb->s_id,
+ "ino=%ld\n", __func__, inode->i_sb->s_id,
inode->i_ino);
goto out_unlock;
}
len = INITCONTEXTLEN;
- context = kmalloc(len, GFP_KERNEL);
+ context = kmalloc(len, GFP_NOFS);
if (!context) {
rc = -ENOMEM;
dput(dentry);
@@ -1161,7 +1159,7 @@
}
kfree(context);
len = rc;
- context = kmalloc(len, GFP_KERNEL);
+ context = kmalloc(len, GFP_NOFS);
if (!context) {
rc = -ENOMEM;
dput(dentry);
@@ -1175,7 +1173,7 @@
if (rc < 0) {
if (rc != -ENODATA) {
printk(KERN_WARNING "%s: getxattr returned "
- "%d for dev=%s ino=%ld\n", __FUNCTION__,
+ "%d for dev=%s ino=%ld\n", __func__,
-rc, inode->i_sb->s_id, inode->i_ino);
kfree(context);
goto out_unlock;
@@ -1185,11 +1183,12 @@
rc = 0;
} else {
rc = security_context_to_sid_default(context, rc, &sid,
- sbsec->def_sid);
+ sbsec->def_sid,
+ GFP_NOFS);
if (rc) {
printk(KERN_WARNING "%s: context_to_sid(%s) "
"returned %d for dev=%s ino=%ld\n",
- __FUNCTION__, context, -rc,
+ __func__, context, -rc,
inode->i_sb->s_id, inode->i_ino);
kfree(context);
/* Leave with the unlabeled SID */
@@ -1617,6 +1616,35 @@
return av;
}
+/*
+ * Convert a file mask to an access vector and include the correct open
+ * open permission.
+ */
+static inline u32 open_file_mask_to_av(int mode, int mask)
+{
+ u32 av = file_mask_to_av(mode, mask);
+
+ if (selinux_policycap_openperm) {
+ /*
+ * lnk files and socks do not really have an 'open'
+ */
+ if (S_ISREG(mode))
+ av |= FILE__OPEN;
+ else if (S_ISCHR(mode))
+ av |= CHR_FILE__OPEN;
+ else if (S_ISBLK(mode))
+ av |= BLK_FILE__OPEN;
+ else if (S_ISFIFO(mode))
+ av |= FIFO_FILE__OPEN;
+ else if (S_ISDIR(mode))
+ av |= DIR__OPEN;
+ else
+ printk(KERN_ERR "SELinux: WARNING: inside open_file_to_av "
+ "with unknown mode:%x\n", mode);
+ }
+ return av;
+}
+
/* Convert a Linux file to an access vector. */
static inline u32 file_to_av(struct file *file)
{
@@ -1630,6 +1658,12 @@
else
av |= FILE__WRITE;
}
+ if (!av) {
+ /*
+ * Special file opened with flags 3 for ioctl-only use.
+ */
+ av = FILE__IOCTL;
+ }
return av;
}
@@ -1638,19 +1672,13 @@
static int selinux_ptrace(struct task_struct *parent, struct task_struct *child)
{
- struct task_security_struct *psec = parent->security;
- struct task_security_struct *csec = child->security;
int rc;
rc = secondary_ops->ptrace(parent,child);
if (rc)
return rc;
- rc = task_has_perm(parent, child, PROCESS__PTRACE);
- /* Save the SID of the tracing process for later use in apply_creds. */
- if (!(child->ptrace & PT_PTRACED) && !rc)
- csec->ptrace_sid = psec->sid;
- return rc;
+ return task_has_perm(parent, child, PROCESS__PTRACE);
}
static int selinux_capget(struct task_struct *target, kernel_cap_t *effective,
@@ -1872,6 +1900,22 @@
return __vm_enough_memory(mm, pages, cap_sys_admin);
}
+/**
+ * task_tracer_task - return the task that is tracing the given task
+ * @task: task to consider
+ *
+ * Returns NULL if noone is tracing @task, or the &struct task_struct
+ * pointer to its tracer.
+ *
+ * Must be called under rcu_read_lock().
+ */
+static struct task_struct *task_tracer_task(struct task_struct *task)
+{
+ if (task->ptrace & PT_PTRACED)
+ return rcu_dereference(task->parent);
+ return NULL;
+}
+
/* binprm security operations */
static int selinux_bprm_alloc_security(struct linux_binprm *bprm)
@@ -1882,7 +1926,6 @@
if (!bsec)
return -ENOMEM;
- bsec->bprm = bprm;
bsec->sid = SECINITSID_UNLABELED;
bsec->set = 0;
@@ -2119,12 +2162,25 @@
/* Check for ptracing, and update the task SID if ok.
Otherwise, leave SID unchanged and kill. */
if (unsafe & (LSM_UNSAFE_PTRACE | LSM_UNSAFE_PTRACE_CAP)) {
- rc = avc_has_perm(tsec->ptrace_sid, sid,
- SECCLASS_PROCESS, PROCESS__PTRACE,
- NULL);
- if (rc) {
- bsec->unsafe = 1;
- return;
+ struct task_struct *tracer;
+ struct task_security_struct *sec;
+ u32 ptsid = 0;
+
+ rcu_read_lock();
+ tracer = task_tracer_task(current);
+ if (likely(tracer != NULL)) {
+ sec = tracer->security;
+ ptsid = sec->sid;
+ }
+ rcu_read_unlock();
+
+ if (ptsid != 0) {
+ rc = avc_has_perm(ptsid, sid, SECCLASS_PROCESS,
+ PROCESS__PTRACE, NULL);
+ if (rc) {
+ bsec->unsafe = 1;
+ return;
+ }
}
}
tsec->sid = sid;
@@ -2232,10 +2288,10 @@
static inline int selinux_option(char *option, int len)
{
- return (match_prefix("context=", sizeof("context=")-1, option, len) ||
- match_prefix("fscontext=", sizeof("fscontext=")-1, option, len) ||
- match_prefix("defcontext=", sizeof("defcontext=")-1, option, len) ||
- match_prefix("rootcontext=", sizeof("rootcontext=")-1, option, len));
+ return (match_prefix(CONTEXT_STR, sizeof(CONTEXT_STR)-1, option, len) ||
+ match_prefix(FSCONTEXT_STR, sizeof(FSCONTEXT_STR)-1, option, len) ||
+ match_prefix(DEFCONTEXT_STR, sizeof(DEFCONTEXT_STR)-1, option, len) ||
+ match_prefix(ROOTCONTEXT_STR, sizeof(ROOTCONTEXT_STR)-1, option, len));
}
static inline void take_option(char **to, char *from, int *first, int len)
@@ -2405,7 +2461,7 @@
printk(KERN_WARNING "%s: "
"security_transition_sid failed, rc=%d (dev=%s "
"ino=%ld)\n",
- __FUNCTION__,
+ __func__,
-rc, inode->i_sb->s_id, inode->i_ino);
return rc;
}
@@ -2423,7 +2479,7 @@
return -EOPNOTSUPP;
if (name) {
- namep = kstrdup(XATTR_SELINUX_SUFFIX, GFP_KERNEL);
+ namep = kstrdup(XATTR_SELINUX_SUFFIX, GFP_NOFS);
if (!namep)
return -ENOMEM;
*name = namep;
@@ -2529,7 +2585,7 @@
}
return inode_has_perm(current, inode,
- file_mask_to_av(inode->i_mode, mask), NULL);
+ open_file_mask_to_av(inode->i_mode, mask), NULL);
}
static int selinux_inode_setattr(struct dentry *dentry, struct iattr *iattr)
@@ -2639,7 +2695,7 @@
rc = security_context_to_sid(value, size, &newsid);
if (rc) {
printk(KERN_WARNING "%s: unable to obtain SID for context "
- "%s, rc=%d\n", __FUNCTION__, (char*)value, -rc);
+ "%s, rc=%d\n", __func__, (char *)value, -rc);
return;
}
@@ -3080,11 +3136,6 @@
tsec2->keycreate_sid = tsec1->keycreate_sid;
tsec2->sockcreate_sid = tsec1->sockcreate_sid;
- /* Retain ptracer SID across fork, if any.
- This will be reset by the ptrace hook upon any
- subsequent ptrace_attach operations. */
- tsec2->ptrace_sid = tsec1->ptrace_sid;
-
return 0;
}
@@ -3620,10 +3671,8 @@
inet_get_local_port_range(&low, &high);
if (snum < max(PROT_SOCK, low) || snum > high) {
- err = security_port_sid(sk->sk_family,
- sk->sk_type,
- sk->sk_protocol, snum,
- &sid);
+ err = sel_netport_sid(sk->sk_protocol,
+ snum, &sid);
if (err)
goto out;
AVC_AUDIT_DATA_INIT(&ad,NET);
@@ -3711,8 +3760,7 @@
snum = ntohs(addr6->sin6_port);
}
- err = security_port_sid(sk->sk_family, sk->sk_type,
- sk->sk_protocol, snum, &sid);
+ err = sel_netport_sid(sk->sk_protocol, snum, &sid);
if (err)
goto out;
@@ -3943,9 +3991,8 @@
if (!recv_perm)
return 0;
- err = security_port_sid(sk->sk_family, sk->sk_type,
- sk->sk_protocol, ntohs(ad->u.net.sport),
- &port_sid);
+ err = sel_netport_sid(sk->sk_protocol,
+ ntohs(ad->u.net.sport), &port_sid);
if (unlikely(err)) {
printk(KERN_WARNING
"SELinux: failure in"
@@ -4132,7 +4179,7 @@
newssec->peer_sid = ssec->peer_sid;
newssec->sclass = ssec->sclass;
- selinux_netlbl_sk_security_clone(ssec, newssec);
+ selinux_netlbl_sk_security_reset(newssec, newsk->sk_family);
}
static void selinux_sk_getsecid(struct sock *sk, u32 *secid)
@@ -4366,9 +4413,8 @@
if (send_perm != 0)
return 0;
- err = security_port_sid(sk->sk_family, sk->sk_type,
- sk->sk_protocol, ntohs(ad->u.net.dport),
- &port_sid);
+ err = sel_netport_sid(sk->sk_protocol,
+ ntohs(ad->u.net.dport), &port_sid);
if (unlikely(err)) {
printk(KERN_WARNING
"SELinux: failure in"
@@ -4554,7 +4600,6 @@
return -ENOMEM;
isec->sclass = sclass;
- isec->ipc_perm = perm;
isec->sid = tsec->sid;
perm->security = isec;
@@ -4576,7 +4621,6 @@
if (!msec)
return -ENOMEM;
- msec->msg = msg;
msec->sid = SECINITSID_UNLABELED;
msg->security = msec;
@@ -4987,14 +5031,14 @@
{
if (secondary_ops != original_ops) {
printk(KERN_ERR "%s: There is already a secondary security "
- "module registered.\n", __FUNCTION__);
+ "module registered.\n", __func__);
return -EINVAL;
}
secondary_ops = ops;
printk(KERN_INFO "%s: Registering secondary module %s\n",
- __FUNCTION__,
+ __func__,
name);
return 0;
@@ -5050,6 +5094,7 @@
char *name, void *value, size_t size)
{
struct task_security_struct *tsec;
+ struct task_struct *tracer;
u32 sid = 0;
int error;
char *str = value;
@@ -5138,18 +5183,24 @@
/* Check for ptracing, and update the task SID if ok.
Otherwise, leave SID unchanged and fail. */
task_lock(p);
- if (p->ptrace & PT_PTRACED) {
- error = avc_has_perm_noaudit(tsec->ptrace_sid, sid,
+ rcu_read_lock();
+ tracer = task_tracer_task(p);
+ if (tracer != NULL) {
+ struct task_security_struct *ptsec = tracer->security;
+ u32 ptsid = ptsec->sid;
+ rcu_read_unlock();
+ error = avc_has_perm_noaudit(ptsid, sid,
SECCLASS_PROCESS,
PROCESS__PTRACE, 0, &avd);
if (!error)
tsec->sid = sid;
task_unlock(p);
- avc_audit(tsec->ptrace_sid, sid, SECCLASS_PROCESS,
+ avc_audit(ptsid, sid, SECCLASS_PROCESS,
PROCESS__PTRACE, &avd, error, NULL);
if (error)
return error;
} else {
+ rcu_read_unlock();
tsec->sid = sid;
task_unlock(p);
}
@@ -5187,7 +5238,6 @@
if (!ksec)
return -ENOMEM;
- ksec->obj = k;
if (tsec->keycreate_sid)
ksec->sid = tsec->keycreate_sid;
else
@@ -5624,5 +5674,3 @@
return 0;
}
#endif
-
-
diff --git a/security/selinux/include/av_perm_to_string.h b/security/selinux/include/av_perm_to_string.h
index d569669..1223b4f 100644
--- a/security/selinux/include/av_perm_to_string.h
+++ b/security/selinux/include/av_perm_to_string.h
@@ -14,12 +14,17 @@
S_(SECCLASS_DIR, DIR__REPARENT, "reparent")
S_(SECCLASS_DIR, DIR__SEARCH, "search")
S_(SECCLASS_DIR, DIR__RMDIR, "rmdir")
+ S_(SECCLASS_DIR, DIR__OPEN, "open")
S_(SECCLASS_FILE, FILE__EXECUTE_NO_TRANS, "execute_no_trans")
S_(SECCLASS_FILE, FILE__ENTRYPOINT, "entrypoint")
S_(SECCLASS_FILE, FILE__EXECMOD, "execmod")
+ S_(SECCLASS_FILE, FILE__OPEN, "open")
S_(SECCLASS_CHR_FILE, CHR_FILE__EXECUTE_NO_TRANS, "execute_no_trans")
S_(SECCLASS_CHR_FILE, CHR_FILE__ENTRYPOINT, "entrypoint")
S_(SECCLASS_CHR_FILE, CHR_FILE__EXECMOD, "execmod")
+ S_(SECCLASS_CHR_FILE, CHR_FILE__OPEN, "open")
+ S_(SECCLASS_BLK_FILE, BLK_FILE__OPEN, "open")
+ S_(SECCLASS_FIFO_FILE, FIFO_FILE__OPEN, "open")
S_(SECCLASS_FD, FD__USE, "use")
S_(SECCLASS_TCP_SOCKET, TCP_SOCKET__CONNECTTO, "connectto")
S_(SECCLASS_TCP_SOCKET, TCP_SOCKET__NEWCONN, "newconn")
diff --git a/security/selinux/include/av_permissions.h b/security/selinux/include/av_permissions.h
index 75b4131..c4c5116 100644
--- a/security/selinux/include/av_permissions.h
+++ b/security/selinux/include/av_permissions.h
@@ -79,6 +79,7 @@
#define DIR__REPARENT 0x00080000UL
#define DIR__SEARCH 0x00100000UL
#define DIR__RMDIR 0x00200000UL
+#define DIR__OPEN 0x00400000UL
#define FILE__IOCTL 0x00000001UL
#define FILE__READ 0x00000002UL
#define FILE__WRITE 0x00000004UL
@@ -99,6 +100,7 @@
#define FILE__EXECUTE_NO_TRANS 0x00020000UL
#define FILE__ENTRYPOINT 0x00040000UL
#define FILE__EXECMOD 0x00080000UL
+#define FILE__OPEN 0x00100000UL
#define LNK_FILE__IOCTL 0x00000001UL
#define LNK_FILE__READ 0x00000002UL
#define LNK_FILE__WRITE 0x00000004UL
@@ -136,6 +138,7 @@
#define CHR_FILE__EXECUTE_NO_TRANS 0x00020000UL
#define CHR_FILE__ENTRYPOINT 0x00040000UL
#define CHR_FILE__EXECMOD 0x00080000UL
+#define CHR_FILE__OPEN 0x00100000UL
#define BLK_FILE__IOCTL 0x00000001UL
#define BLK_FILE__READ 0x00000002UL
#define BLK_FILE__WRITE 0x00000004UL
@@ -153,6 +156,7 @@
#define BLK_FILE__SWAPON 0x00004000UL
#define BLK_FILE__QUOTAON 0x00008000UL
#define BLK_FILE__MOUNTON 0x00010000UL
+#define BLK_FILE__OPEN 0x00020000UL
#define SOCK_FILE__IOCTL 0x00000001UL
#define SOCK_FILE__READ 0x00000002UL
#define SOCK_FILE__WRITE 0x00000004UL
@@ -187,6 +191,7 @@
#define FIFO_FILE__SWAPON 0x00004000UL
#define FIFO_FILE__QUOTAON 0x00008000UL
#define FIFO_FILE__MOUNTON 0x00010000UL
+#define FIFO_FILE__OPEN 0x00020000UL
#define FD__USE 0x00000001UL
#define SOCKET__IOCTL 0x00000001UL
#define SOCKET__READ 0x00000002UL
diff --git a/security/selinux/include/netlabel.h b/security/selinux/include/netlabel.h
index 00a2809..9a9e7cd 100644
--- a/security/selinux/include/netlabel.h
+++ b/security/selinux/include/netlabel.h
@@ -41,10 +41,6 @@
void selinux_netlbl_sk_security_reset(struct sk_security_struct *ssec,
int family);
-void selinux_netlbl_sk_security_init(struct sk_security_struct *ssec,
- int family);
-void selinux_netlbl_sk_security_clone(struct sk_security_struct *ssec,
- struct sk_security_struct *newssec);
int selinux_netlbl_skbuff_getsid(struct sk_buff *skb,
u16 family,
@@ -73,18 +69,6 @@
{
return;
}
-static inline void selinux_netlbl_sk_security_init(
- struct sk_security_struct *ssec,
- int family)
-{
- return;
-}
-static inline void selinux_netlbl_sk_security_clone(
- struct sk_security_struct *ssec,
- struct sk_security_struct *newssec)
-{
- return;
-}
static inline int selinux_netlbl_skbuff_getsid(struct sk_buff *skb,
u16 family,
diff --git a/security/selinux/include/netport.h b/security/selinux/include/netport.h
new file mode 100644
index 0000000..8991752
--- /dev/null
+++ b/security/selinux/include/netport.h
@@ -0,0 +1,31 @@
+/*
+ * Network port table
+ *
+ * SELinux must keep a mapping of network ports to labels/SIDs. This
+ * mapping is maintained as part of the normal policy but a fast cache is
+ * needed to reduce the lookup overhead.
+ *
+ * Author: Paul Moore <paul.moore@hp.com>
+ *
+ */
+
+/*
+ * (c) Copyright Hewlett-Packard Development Company, L.P., 2008
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _SELINUX_NETPORT_H
+#define _SELINUX_NETPORT_H
+
+int sel_netport_sid(u8 protocol, u16 pnum, u32 *sid);
+
+#endif
diff --git a/security/selinux/include/objsec.h b/security/selinux/include/objsec.h
index c6c2bb4..300b61b 100644
--- a/security/selinux/include/objsec.h
+++ b/security/selinux/include/objsec.h
@@ -28,14 +28,12 @@
#include "avc.h"
struct task_security_struct {
- struct task_struct *task; /* back pointer to task object */
u32 osid; /* SID prior to last execve */
u32 sid; /* current SID */
u32 exec_sid; /* exec SID */
u32 create_sid; /* fscreate SID */
u32 keycreate_sid; /* keycreate SID */
u32 sockcreate_sid; /* fscreate SID */
- u32 ptrace_sid; /* SID of ptrace parent */
};
struct inode_security_struct {
@@ -50,7 +48,6 @@
};
struct file_security_struct {
- struct file *file; /* back pointer to file object */
u32 sid; /* SID of open file description */
u32 fown_sid; /* SID of file owner (for SIGIO) */
u32 isid; /* SID of inode at the time of file open */
@@ -73,18 +70,15 @@
};
struct msg_security_struct {
- struct msg_msg *msg; /* back pointer */
u32 sid; /* SID of message */
};
struct ipc_security_struct {
- struct kern_ipc_perm *ipc_perm; /* back pointer */
u16 sclass; /* security class of this object */
u32 sid; /* SID of IPC resource */
};
struct bprm_security_struct {
- struct linux_binprm *bprm; /* back pointer to bprm object */
u32 sid; /* SID for transformed process */
unsigned char set;
@@ -109,8 +103,13 @@
u16 family; /* address family */
};
+struct netport_security_struct {
+ u32 sid; /* SID for this node */
+ u16 port; /* port number */
+ u8 protocol; /* transport protocol */
+};
+
struct sk_security_struct {
- struct sock *sk; /* back pointer to sk object */
u32 sid; /* SID of this object */
u32 peer_sid; /* SID of peer */
u16 sclass; /* sock security class */
@@ -120,12 +119,10 @@
NLBL_REQUIRE,
NLBL_LABELED,
} nlbl_state;
- spinlock_t nlbl_lock; /* protects nlbl_state */
#endif
};
struct key_security_struct {
- struct key *obj; /* back pointer */
u32 sid; /* SID of key */
};
diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h
index f7d2f03..1904c46 100644
--- a/security/selinux/include/security.h
+++ b/security/selinux/include/security.h
@@ -26,13 +26,14 @@
#define POLICYDB_VERSION_AVTAB 20
#define POLICYDB_VERSION_RANGETRANS 21
#define POLICYDB_VERSION_POLCAP 22
+#define POLICYDB_VERSION_PERMISSIVE 23
/* Range of policy versions we understand*/
#define POLICYDB_VERSION_MIN POLICYDB_VERSION_BASE
#ifdef CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX
#define POLICYDB_VERSION_MAX CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE
#else
-#define POLICYDB_VERSION_MAX POLICYDB_VERSION_POLCAP
+#define POLICYDB_VERSION_MAX POLICYDB_VERSION_PERMISSIVE
#endif
#define CONTEXT_MNT 0x01
@@ -40,6 +41,11 @@
#define ROOTCONTEXT_MNT 0x04
#define DEFCONTEXT_MNT 0x08
+#define CONTEXT_STR "context="
+#define FSCONTEXT_STR "fscontext="
+#define ROOTCONTEXT_STR "rootcontext="
+#define DEFCONTEXT_STR "defcontext="
+
struct netlbl_lsm_secattr;
extern int selinux_enabled;
@@ -48,11 +54,13 @@
/* Policy capabilities */
enum {
POLICYDB_CAPABILITY_NETPEER,
+ POLICYDB_CAPABILITY_OPENPERM,
__POLICYDB_CAPABILITY_MAX
};
#define POLICYDB_CAPABILITY_MAX (__POLICYDB_CAPABILITY_MAX - 1)
extern int selinux_policycap_netpeer;
+extern int selinux_policycap_openperm;
int security_load_policy(void * data, size_t len);
@@ -67,6 +75,8 @@
u32 seqno;
};
+int security_permissive_sid(u32 sid);
+
int security_compute_av(u32 ssid, u32 tsid,
u16 tclass, u32 requested,
struct av_decision *avd);
@@ -86,13 +96,13 @@
int security_context_to_sid(char *scontext, u32 scontext_len,
u32 *out_sid);
-int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *out_sid, u32 def_sid);
+int security_context_to_sid_default(char *scontext, u32 scontext_len,
+ u32 *out_sid, u32 def_sid, gfp_t gfp_flags);
int security_get_user_sids(u32 callsid, char *username,
u32 **sids, u32 *nel);
-int security_port_sid(u16 domain, u16 type, u8 protocol, u16 port,
- u32 *out_sid);
+int security_port_sid(u8 protocol, u16 port, u32 *out_sid);
int security_netif_sid(char *name, u32 *if_sid);
diff --git a/security/selinux/netlabel.c b/security/selinux/netlabel.c
index 0fa2be4..e8ee91a 100644
--- a/security/selinux/netlabel.c
+++ b/security/selinux/netlabel.c
@@ -34,6 +34,7 @@
#include "objsec.h"
#include "security.h"
+#include "netlabel.h"
/**
* selinux_netlbl_sidlookup_cached - Cache a SID lookup
@@ -69,9 +70,7 @@
*
* Description:
* Attempt to label a socket using the NetLabel mechanism using the given
- * SID. Returns zero values on success, negative values on failure. The
- * caller is responsibile for calling rcu_read_lock() before calling this
- * this function and rcu_read_unlock() after this function returns.
+ * SID. Returns zero values on success, negative values on failure.
*
*/
static int selinux_netlbl_sock_setsid(struct sock *sk, u32 sid)
@@ -86,11 +85,8 @@
if (rc != 0)
goto sock_setsid_return;
rc = netlbl_sock_setattr(sk, &secattr);
- if (rc == 0) {
- spin_lock_bh(&sksec->nlbl_lock);
+ if (rc == 0)
sksec->nlbl_state = NLBL_LABELED;
- spin_unlock_bh(&sksec->nlbl_lock);
- }
sock_setsid_return:
netlbl_secattr_destroy(&secattr);
@@ -129,45 +125,6 @@
}
/**
- * selinux_netlbl_sk_security_init - Setup the NetLabel fields
- * @ssec: the sk_security_struct
- * @family: the socket family
- *
- * Description:
- * Called when a new sk_security_struct is allocated to initialize the NetLabel
- * fields.
- *
- */
-void selinux_netlbl_sk_security_init(struct sk_security_struct *ssec,
- int family)
-{
- /* No locking needed, we are the only one who has access to ssec */
- selinux_netlbl_sk_security_reset(ssec, family);
- spin_lock_init(&ssec->nlbl_lock);
-}
-
-/**
- * selinux_netlbl_sk_security_clone - Copy the NetLabel fields
- * @ssec: the original sk_security_struct
- * @newssec: the cloned sk_security_struct
- *
- * Description:
- * Clone the NetLabel specific sk_security_struct fields from @ssec to
- * @newssec.
- *
- */
-void selinux_netlbl_sk_security_clone(struct sk_security_struct *ssec,
- struct sk_security_struct *newssec)
-{
- /* We don't need to take newssec->nlbl_lock because we are the only
- * thread with access to newssec, but we do need to take the RCU read
- * lock as other threads could have access to ssec */
- rcu_read_lock();
- selinux_netlbl_sk_security_reset(newssec, ssec->sk->sk_family);
- rcu_read_unlock();
-}
-
-/**
* selinux_netlbl_skbuff_getsid - Get the sid of a packet using NetLabel
* @skb: the packet
* @family: protocol family
@@ -221,12 +178,8 @@
struct netlbl_lsm_secattr secattr;
u32 nlbl_peer_sid;
- rcu_read_lock();
-
- if (sksec->nlbl_state != NLBL_REQUIRE) {
- rcu_read_unlock();
+ if (sksec->nlbl_state != NLBL_REQUIRE)
return;
- }
netlbl_secattr_init(&secattr);
if (netlbl_sock_getattr(sk, &secattr) == 0 &&
@@ -239,8 +192,6 @@
* here we will pick up the pieces in later calls to
* selinux_netlbl_inode_permission(). */
selinux_netlbl_sock_setsid(sk, sksec->sid);
-
- rcu_read_unlock();
}
/**
@@ -254,16 +205,13 @@
*/
int selinux_netlbl_socket_post_create(struct socket *sock)
{
- int rc = 0;
struct sock *sk = sock->sk;
struct sk_security_struct *sksec = sk->sk_security;
- rcu_read_lock();
- if (sksec->nlbl_state == NLBL_REQUIRE)
- rc = selinux_netlbl_sock_setsid(sk, sksec->sid);
- rcu_read_unlock();
+ if (sksec->nlbl_state != NLBL_REQUIRE)
+ return 0;
- return rc;
+ return selinux_netlbl_sock_setsid(sk, sksec->sid);
}
/**
@@ -288,21 +236,21 @@
if (!S_ISSOCK(inode->i_mode) ||
((mask & (MAY_WRITE | MAY_APPEND)) == 0))
return 0;
+
sock = SOCKET_I(inode);
sk = sock->sk;
sksec = sk->sk_security;
-
- rcu_read_lock();
- if (sksec->nlbl_state != NLBL_REQUIRE) {
- rcu_read_unlock();
+ if (sksec->nlbl_state != NLBL_REQUIRE)
return 0;
- }
+
local_bh_disable();
bh_lock_sock_nested(sk);
- rc = selinux_netlbl_sock_setsid(sk, sksec->sid);
+ if (likely(sksec->nlbl_state == NLBL_REQUIRE))
+ rc = selinux_netlbl_sock_setsid(sk, sksec->sid);
+ else
+ rc = 0;
bh_unlock_sock(sk);
local_bh_enable();
- rcu_read_unlock();
return rc;
}
@@ -385,7 +333,6 @@
struct sk_security_struct *sksec = sk->sk_security;
struct netlbl_lsm_secattr secattr;
- rcu_read_lock();
if (level == IPPROTO_IP && optname == IP_OPTIONS &&
sksec->nlbl_state == NLBL_LABELED) {
netlbl_secattr_init(&secattr);
@@ -396,7 +343,6 @@
rc = -EACCES;
netlbl_secattr_destroy(&secattr);
}
- rcu_read_unlock();
return rc;
}
diff --git a/security/selinux/netlink.c b/security/selinux/netlink.c
index b59871d..6214a7a 100644
--- a/security/selinux/netlink.c
+++ b/security/selinux/netlink.c
@@ -89,7 +89,7 @@
nlmsg_failure:
kfree_skb(skb);
oom:
- printk(KERN_ERR "SELinux: OOM in %s\n", __FUNCTION__);
+ printk(KERN_ERR "SELinux: OOM in %s\n", __func__);
goto out;
}
diff --git a/security/selinux/netport.c b/security/selinux/netport.c
new file mode 100644
index 0000000..68ede3c
--- /dev/null
+++ b/security/selinux/netport.c
@@ -0,0 +1,286 @@
+/*
+ * Network port table
+ *
+ * SELinux must keep a mapping of network ports to labels/SIDs. This
+ * mapping is maintained as part of the normal policy but a fast cache is
+ * needed to reduce the lookup overhead.
+ *
+ * Author: Paul Moore <paul.moore@hp.com>
+ *
+ * This code is heavily based on the "netif" concept originally developed by
+ * James Morris <jmorris@redhat.com>
+ * (see security/selinux/netif.c for more information)
+ *
+ */
+
+/*
+ * (c) Copyright Hewlett-Packard Development Company, L.P., 2008
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/rcupdate.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <net/ip.h>
+#include <net/ipv6.h>
+#include <asm/bug.h>
+
+#include "netport.h"
+#include "objsec.h"
+
+#define SEL_NETPORT_HASH_SIZE 256
+#define SEL_NETPORT_HASH_BKT_LIMIT 16
+
+struct sel_netport_bkt {
+ int size;
+ struct list_head list;
+};
+
+struct sel_netport {
+ struct netport_security_struct psec;
+
+ struct list_head list;
+ struct rcu_head rcu;
+};
+
+/* NOTE: we are using a combined hash table for both IPv4 and IPv6, the reason
+ * for this is that I suspect most users will not make heavy use of both
+ * address families at the same time so one table will usually end up wasted,
+ * if this becomes a problem we can always add a hash table for each address
+ * family later */
+
+static LIST_HEAD(sel_netport_list);
+static DEFINE_SPINLOCK(sel_netport_lock);
+static struct sel_netport_bkt sel_netport_hash[SEL_NETPORT_HASH_SIZE];
+
+/**
+ * sel_netport_free - Frees a port entry
+ * @p: the entry's RCU field
+ *
+ * Description:
+ * This function is designed to be used as a callback to the call_rcu()
+ * function so that memory allocated to a hash table port entry can be
+ * released safely.
+ *
+ */
+static void sel_netport_free(struct rcu_head *p)
+{
+ struct sel_netport *port = container_of(p, struct sel_netport, rcu);
+ kfree(port);
+}
+
+/**
+ * sel_netport_hashfn - Hashing function for the port table
+ * @pnum: port number
+ *
+ * Description:
+ * This is the hashing function for the port table, it returns the bucket
+ * number for the given port.
+ *
+ */
+static unsigned int sel_netport_hashfn(u16 pnum)
+{
+ return (pnum & (SEL_NETPORT_HASH_SIZE - 1));
+}
+
+/**
+ * sel_netport_find - Search for a port record
+ * @protocol: protocol
+ * @port: pnum
+ *
+ * Description:
+ * Search the network port table and return the matching record. If an entry
+ * can not be found in the table return NULL.
+ *
+ */
+static struct sel_netport *sel_netport_find(u8 protocol, u16 pnum)
+{
+ unsigned int idx;
+ struct sel_netport *port;
+
+ idx = sel_netport_hashfn(pnum);
+ list_for_each_entry_rcu(port, &sel_netport_hash[idx].list, list)
+ if (port->psec.port == pnum &&
+ port->psec.protocol == protocol)
+ return port;
+
+ return NULL;
+}
+
+/**
+ * sel_netport_insert - Insert a new port into the table
+ * @port: the new port record
+ *
+ * Description:
+ * Add a new port record to the network address hash table. Returns zero on
+ * success, negative values on failure.
+ *
+ */
+static int sel_netport_insert(struct sel_netport *port)
+{
+ unsigned int idx;
+
+ /* we need to impose a limit on the growth of the hash table so check
+ * this bucket to make sure it is within the specified bounds */
+ idx = sel_netport_hashfn(port->psec.port);
+ list_add_rcu(&port->list, &sel_netport_hash[idx].list);
+ if (sel_netport_hash[idx].size == SEL_NETPORT_HASH_BKT_LIMIT) {
+ struct sel_netport *tail;
+ tail = list_entry(port->list.prev, struct sel_netport, list);
+ list_del_rcu(port->list.prev);
+ call_rcu(&tail->rcu, sel_netport_free);
+ } else
+ sel_netport_hash[idx].size++;
+
+ return 0;
+}
+
+/**
+ * sel_netport_sid_slow - Lookup the SID of a network address using the policy
+ * @protocol: protocol
+ * @pnum: port
+ * @sid: port SID
+ *
+ * Description:
+ * This function determines the SID of a network port by quering the security
+ * policy. The result is added to the network port table to speedup future
+ * queries. Returns zero on success, negative values on failure.
+ *
+ */
+static int sel_netport_sid_slow(u8 protocol, u16 pnum, u32 *sid)
+{
+ int ret;
+ struct sel_netport *port;
+ struct sel_netport *new = NULL;
+
+ spin_lock_bh(&sel_netport_lock);
+ port = sel_netport_find(protocol, pnum);
+ if (port != NULL) {
+ *sid = port->psec.sid;
+ ret = 0;
+ goto out;
+ }
+ new = kzalloc(sizeof(*new), GFP_ATOMIC);
+ if (new == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ ret = security_port_sid(protocol, pnum, &new->psec.sid);
+ if (ret != 0)
+ goto out;
+ new->psec.port = pnum;
+ new->psec.protocol = protocol;
+ ret = sel_netport_insert(new);
+ if (ret != 0)
+ goto out;
+ *sid = new->psec.sid;
+
+out:
+ spin_unlock_bh(&sel_netport_lock);
+ if (unlikely(ret)) {
+ printk(KERN_WARNING
+ "SELinux: failure in sel_netport_sid_slow(),"
+ " unable to determine network port label\n");
+ kfree(new);
+ }
+ return ret;
+}
+
+/**
+ * sel_netport_sid - Lookup the SID of a network port
+ * @protocol: protocol
+ * @pnum: port
+ * @sid: port SID
+ *
+ * Description:
+ * This function determines the SID of a network port using the fastest method
+ * possible. First the port table is queried, but if an entry can't be found
+ * then the policy is queried and the result is added to the table to speedup
+ * future queries. Returns zero on success, negative values on failure.
+ *
+ */
+int sel_netport_sid(u8 protocol, u16 pnum, u32 *sid)
+{
+ struct sel_netport *port;
+
+ rcu_read_lock();
+ port = sel_netport_find(protocol, pnum);
+ if (port != NULL) {
+ *sid = port->psec.sid;
+ rcu_read_unlock();
+ return 0;
+ }
+ rcu_read_unlock();
+
+ return sel_netport_sid_slow(protocol, pnum, sid);
+}
+
+/**
+ * sel_netport_flush - Flush the entire network port table
+ *
+ * Description:
+ * Remove all entries from the network address table.
+ *
+ */
+static void sel_netport_flush(void)
+{
+ unsigned int idx;
+ struct sel_netport *port;
+
+ spin_lock_bh(&sel_netport_lock);
+ for (idx = 0; idx < SEL_NETPORT_HASH_SIZE; idx++) {
+ list_for_each_entry(port, &sel_netport_hash[idx].list, list) {
+ list_del_rcu(&port->list);
+ call_rcu(&port->rcu, sel_netport_free);
+ }
+ sel_netport_hash[idx].size = 0;
+ }
+ spin_unlock_bh(&sel_netport_lock);
+}
+
+static int sel_netport_avc_callback(u32 event, u32 ssid, u32 tsid,
+ u16 class, u32 perms, u32 *retained)
+{
+ if (event == AVC_CALLBACK_RESET) {
+ sel_netport_flush();
+ synchronize_net();
+ }
+ return 0;
+}
+
+static __init int sel_netport_init(void)
+{
+ int iter;
+ int ret;
+
+ if (!selinux_enabled)
+ return 0;
+
+ for (iter = 0; iter < SEL_NETPORT_HASH_SIZE; iter++) {
+ INIT_LIST_HEAD(&sel_netport_hash[iter].list);
+ sel_netport_hash[iter].size = 0;
+ }
+
+ ret = avc_add_callback(sel_netport_avc_callback, AVC_CALLBACK_RESET,
+ SECSID_NULL, SECSID_NULL, SECCLASS_NULL, 0);
+ if (ret != 0)
+ panic("avc_add_callback() failed, error %d\n", ret);
+
+ return ret;
+}
+
+__initcall(sel_netport_init);
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 0341567..26fabad 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -42,7 +42,8 @@
/* Policy capability filenames */
static char *policycap_names[] = {
- "network_peer_controls"
+ "network_peer_controls",
+ "open_perms"
};
unsigned int selinux_checkreqprot = CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE;
@@ -391,7 +392,7 @@
if (len > SIMPLE_TRANSACTION_LIMIT) {
printk(KERN_ERR "%s: context size (%u) exceeds payload "
- "max\n", __FUNCTION__, len);
+ "max\n", __func__, len);
length = -ERANGE;
goto out;
}
@@ -644,7 +645,7 @@
if (len > SIMPLE_TRANSACTION_LIMIT) {
printk(KERN_ERR "%s: context size (%u) exceeds payload "
- "max\n", __FUNCTION__, len);
+ "max\n", __func__, len);
length = -ERANGE;
goto out3;
}
@@ -821,7 +822,7 @@
if (len > SIMPLE_TRANSACTION_LIMIT) {
printk(KERN_ERR "%s: context size (%u) exceeds payload "
- "max\n", __FUNCTION__, len);
+ "max\n", __func__, len);
length = -ERANGE;
goto out3;
}
@@ -1760,7 +1761,7 @@
out:
return ret;
err:
- printk(KERN_ERR "%s: failed while creating inodes\n", __FUNCTION__);
+ printk(KERN_ERR "%s: failed while creating inodes\n", __func__);
goto out;
}
diff --git a/security/selinux/ss/avtab.c b/security/selinux/ss/avtab.c
index cd10e27..916e73a 100644
--- a/security/selinux/ss/avtab.c
+++ b/security/selinux/ss/avtab.c
@@ -280,8 +280,8 @@
h->nel = 0;
h->nslot = nslot;
h->mask = mask;
- printk(KERN_DEBUG "SELinux:%d avtab hash slots allocated. "
- "Num of rules:%d\n", h->nslot, nrules);
+ printk(KERN_DEBUG "SELinux: %d avtab hash slots, %d rules.\n",
+ h->nslot, nrules);
return 0;
}
@@ -345,18 +345,18 @@
if (vers < POLICYDB_VERSION_AVTAB) {
rc = next_entry(buf32, fp, sizeof(u32));
if (rc < 0) {
- printk(KERN_ERR "security: avtab: truncated entry\n");
+ printk(KERN_ERR "SELinux: avtab: truncated entry\n");
return -1;
}
items2 = le32_to_cpu(buf32[0]);
if (items2 > ARRAY_SIZE(buf32)) {
- printk(KERN_ERR "security: avtab: entry overflow\n");
+ printk(KERN_ERR "SELinux: avtab: entry overflow\n");
return -1;
}
rc = next_entry(buf32, fp, sizeof(u32)*items2);
if (rc < 0) {
- printk(KERN_ERR "security: avtab: truncated entry\n");
+ printk(KERN_ERR "SELinux: avtab: truncated entry\n");
return -1;
}
items = 0;
@@ -364,19 +364,19 @@
val = le32_to_cpu(buf32[items++]);
key.source_type = (u16)val;
if (key.source_type != val) {
- printk("security: avtab: truncated source type\n");
+ printk("SELinux: avtab: truncated source type\n");
return -1;
}
val = le32_to_cpu(buf32[items++]);
key.target_type = (u16)val;
if (key.target_type != val) {
- printk("security: avtab: truncated target type\n");
+ printk("SELinux: avtab: truncated target type\n");
return -1;
}
val = le32_to_cpu(buf32[items++]);
key.target_class = (u16)val;
if (key.target_class != val) {
- printk("security: avtab: truncated target class\n");
+ printk("SELinux: avtab: truncated target class\n");
return -1;
}
@@ -384,12 +384,12 @@
enabled = (val & AVTAB_ENABLED_OLD) ? AVTAB_ENABLED : 0;
if (!(val & (AVTAB_AV | AVTAB_TYPE))) {
- printk("security: avtab: null entry\n");
+ printk("SELinux: avtab: null entry\n");
return -1;
}
if ((val & AVTAB_AV) &&
(val & AVTAB_TYPE)) {
- printk("security: avtab: entry has both access vectors and types\n");
+ printk("SELinux: avtab: entry has both access vectors and types\n");
return -1;
}
@@ -403,7 +403,7 @@
}
if (items != items2) {
- printk("security: avtab: entry only had %d items, expected %d\n", items2, items);
+ printk("SELinux: avtab: entry only had %d items, expected %d\n", items2, items);
return -1;
}
return 0;
@@ -411,7 +411,7 @@
rc = next_entry(buf16, fp, sizeof(u16)*4);
if (rc < 0) {
- printk("security: avtab: truncated entry\n");
+ printk("SELinux: avtab: truncated entry\n");
return -1;
}
@@ -424,7 +424,7 @@
if (!policydb_type_isvalid(pol, key.source_type) ||
!policydb_type_isvalid(pol, key.target_type) ||
!policydb_class_isvalid(pol, key.target_class)) {
- printk(KERN_WARNING "security: avtab: invalid type or class\n");
+ printk(KERN_WARNING "SELinux: avtab: invalid type or class\n");
return -1;
}
@@ -435,19 +435,19 @@
}
if (!set || set > 1) {
printk(KERN_WARNING
- "security: avtab: more than one specifier\n");
+ "SELinux: avtab: more than one specifier\n");
return -1;
}
rc = next_entry(buf32, fp, sizeof(u32));
if (rc < 0) {
- printk("security: avtab: truncated entry\n");
+ printk("SELinux: avtab: truncated entry\n");
return -1;
}
datum.data = le32_to_cpu(*buf32);
if ((key.specified & AVTAB_TYPE) &&
!policydb_type_isvalid(pol, datum.data)) {
- printk(KERN_WARNING "security: avtab: invalid type\n");
+ printk(KERN_WARNING "SELinux: avtab: invalid type\n");
return -1;
}
return insertf(a, &key, &datum, p);
@@ -468,12 +468,12 @@
rc = next_entry(buf, fp, sizeof(u32));
if (rc < 0) {
- printk(KERN_ERR "security: avtab: truncated table\n");
+ printk(KERN_ERR "SELinux: avtab: truncated table\n");
goto bad;
}
nel = le32_to_cpu(buf[0]);
if (!nel) {
- printk(KERN_ERR "security: avtab: table is empty\n");
+ printk(KERN_ERR "SELinux: avtab: table is empty\n");
rc = -EINVAL;
goto bad;
}
@@ -486,9 +486,9 @@
rc = avtab_read_item(a, fp, pol, avtab_insertf, NULL);
if (rc) {
if (rc == -ENOMEM)
- printk(KERN_ERR "security: avtab: out of memory\n");
+ printk(KERN_ERR "SELinux: avtab: out of memory\n");
else if (rc == -EEXIST)
- printk(KERN_ERR "security: avtab: duplicate entry\n");
+ printk(KERN_ERR "SELinux: avtab: duplicate entry\n");
else
rc = -EINVAL;
goto bad;
diff --git a/security/selinux/ss/conditional.c b/security/selinux/ss/conditional.c
index 50ad85d..a996cf1 100644
--- a/security/selinux/ss/conditional.c
+++ b/security/selinux/ss/conditional.c
@@ -96,7 +96,7 @@
if (new_state != node->cur_state) {
node->cur_state = new_state;
if (new_state == -1)
- printk(KERN_ERR "security: expression result was undefined - disabling all rules.\n");
+ printk(KERN_ERR "SELinux: expression result was undefined - disabling all rules.\n");
/* turn the rules on or off */
for (cur = node->true_list; cur != NULL; cur = cur->next) {
if (new_state <= 0) {
@@ -276,7 +276,7 @@
*/
if (k->specified & AVTAB_TYPE) {
if (avtab_search(&p->te_avtab, k)) {
- printk("security: type rule already exists outside of a conditional.");
+ printk("SELinux: type rule already exists outside of a conditional.");
goto err;
}
/*
@@ -291,7 +291,7 @@
node_ptr = avtab_search_node(&p->te_cond_avtab, k);
if (node_ptr) {
if (avtab_search_node_next(node_ptr, k->specified)) {
- printk("security: too many conflicting type rules.");
+ printk("SELinux: too many conflicting type rules.");
goto err;
}
found = 0;
@@ -302,13 +302,13 @@
}
}
if (!found) {
- printk("security: conflicting type rules.\n");
+ printk("SELinux: conflicting type rules.\n");
goto err;
}
}
} else {
if (avtab_search(&p->te_cond_avtab, k)) {
- printk("security: conflicting type rules when adding type rule for true.\n");
+ printk("SELinux: conflicting type rules when adding type rule for true.\n");
goto err;
}
}
@@ -316,7 +316,7 @@
node_ptr = avtab_insert_nonunique(&p->te_cond_avtab, k, d);
if (!node_ptr) {
- printk("security: could not insert rule.");
+ printk("SELinux: could not insert rule.");
goto err;
}
@@ -376,12 +376,12 @@
static int expr_isvalid(struct policydb *p, struct cond_expr *expr)
{
if (expr->expr_type <= 0 || expr->expr_type > COND_LAST) {
- printk("security: conditional expressions uses unknown operator.\n");
+ printk("SELinux: conditional expressions uses unknown operator.\n");
return 0;
}
if (expr->bool > p->p_bools.nprim) {
- printk("security: conditional expressions uses unknown bool.\n");
+ printk("SELinux: conditional expressions uses unknown bool.\n");
return 0;
}
return 1;
diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c
index 920b5e3..e499af4 100644
--- a/security/selinux/ss/ebitmap.c
+++ b/security/selinux/ss/ebitmap.c
@@ -364,7 +364,7 @@
count = le32_to_cpu(buf[2]);
if (mapunit != sizeof(u64) * 8) {
- printk(KERN_ERR "security: ebitmap: map size %u does not "
+ printk(KERN_ERR "SELinux: ebitmap: map size %u does not "
"match my size %Zd (high bit was %d)\n",
mapunit, sizeof(u64) * 8, e->highbit);
goto bad;
@@ -382,19 +382,19 @@
for (i = 0; i < count; i++) {
rc = next_entry(&startbit, fp, sizeof(u32));
if (rc < 0) {
- printk(KERN_ERR "security: ebitmap: truncated map\n");
+ printk(KERN_ERR "SELinux: ebitmap: truncated map\n");
goto bad;
}
startbit = le32_to_cpu(startbit);
if (startbit & (mapunit - 1)) {
- printk(KERN_ERR "security: ebitmap start bit (%d) is "
+ printk(KERN_ERR "SELinux: ebitmap start bit (%d) is "
"not a multiple of the map unit size (%u)\n",
startbit, mapunit);
goto bad;
}
if (startbit > e->highbit - mapunit) {
- printk(KERN_ERR "security: ebitmap start bit (%d) is "
+ printk(KERN_ERR "SELinux: ebitmap start bit (%d) is "
"beyond the end of the bitmap (%u)\n",
startbit, (e->highbit - mapunit));
goto bad;
@@ -405,7 +405,7 @@
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
if (!tmp) {
printk(KERN_ERR
- "security: ebitmap: out of memory\n");
+ "SELinux: ebitmap: out of memory\n");
rc = -ENOMEM;
goto bad;
}
@@ -418,7 +418,7 @@
}
n = tmp;
} else if (startbit <= n->startbit) {
- printk(KERN_ERR "security: ebitmap: start bit %d"
+ printk(KERN_ERR "SELinux: ebitmap: start bit %d"
" comes after start bit %d\n",
startbit, n->startbit);
goto bad;
@@ -426,7 +426,7 @@
rc = next_entry(&map, fp, sizeof(u64));
if (rc < 0) {
- printk(KERN_ERR "security: ebitmap: truncated map\n");
+ printk(KERN_ERR "SELinux: ebitmap: truncated map\n");
goto bad;
}
map = le64_to_cpu(map);
diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c
index bd7d6a0..6bdb0ff 100644
--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -111,6 +111,11 @@
.version = POLICYDB_VERSION_POLCAP,
.sym_num = SYM_NUM,
.ocon_num = OCON_NUM,
+ },
+ {
+ .version = POLICYDB_VERSION_PERMISSIVE,
+ .sym_num = SYM_NUM,
+ .ocon_num = OCON_NUM,
}
};
@@ -194,6 +199,7 @@
goto out_free_symtab;
ebitmap_init(&p->policycaps);
+ ebitmap_init(&p->permissive_map);
out:
return rc;
@@ -401,14 +407,14 @@
{
int i, rc = 0;
- printk(KERN_DEBUG "security: %d users, %d roles, %d types, %d bools",
+ printk(KERN_DEBUG "SELinux: %d users, %d roles, %d types, %d bools",
p->p_users.nprim, p->p_roles.nprim, p->p_types.nprim, p->p_bools.nprim);
if (selinux_mls_enabled)
printk(", %d sens, %d cats", p->p_levels.nprim,
p->p_cats.nprim);
printk("\n");
- printk(KERN_DEBUG "security: %d classes, %d rules\n",
+ printk(KERN_DEBUG "SELinux: %d classes, %d rules\n",
p->p_classes.nprim, p->te_avtab.nel);
#ifdef DEBUG_HASHES
@@ -687,6 +693,7 @@
kfree(p->type_attr_map);
kfree(p->undefined_perms);
ebitmap_destroy(&p->policycaps);
+ ebitmap_destroy(&p->permissive_map);
return;
}
@@ -702,20 +709,20 @@
rc = sidtab_init(s);
if (rc) {
- printk(KERN_ERR "security: out of memory on SID table init\n");
+ printk(KERN_ERR "SELinux: out of memory on SID table init\n");
goto out;
}
head = p->ocontexts[OCON_ISID];
for (c = head; c; c = c->next) {
if (!c->context[0].user) {
- printk(KERN_ERR "security: SID %s was never "
+ printk(KERN_ERR "SELinux: SID %s was never "
"defined.\n", c->u.name);
rc = -EINVAL;
goto out;
}
if (sidtab_insert(s, c->sid[0], &c->context[0])) {
- printk(KERN_ERR "security: unable to load initial "
+ printk(KERN_ERR "SELinux: unable to load initial "
"SID %s.\n", c->u.name);
rc = -EINVAL;
goto out;
@@ -809,13 +816,13 @@
items = le32_to_cpu(buf[0]);
if (items > ARRAY_SIZE(buf)) {
- printk(KERN_ERR "security: mls: range overflow\n");
+ printk(KERN_ERR "SELinux: mls: range overflow\n");
rc = -EINVAL;
goto out;
}
rc = next_entry(buf, fp, sizeof(u32) * items);
if (rc < 0) {
- printk(KERN_ERR "security: mls: truncated range\n");
+ printk(KERN_ERR "SELinux: mls: truncated range\n");
goto out;
}
r->level[0].sens = le32_to_cpu(buf[0]);
@@ -826,21 +833,21 @@
rc = ebitmap_read(&r->level[0].cat, fp);
if (rc) {
- printk(KERN_ERR "security: mls: error reading low "
+ printk(KERN_ERR "SELinux: mls: error reading low "
"categories\n");
goto out;
}
if (items > 1) {
rc = ebitmap_read(&r->level[1].cat, fp);
if (rc) {
- printk(KERN_ERR "security: mls: error reading high "
+ printk(KERN_ERR "SELinux: mls: error reading high "
"categories\n");
goto bad_high;
}
} else {
rc = ebitmap_cpy(&r->level[1].cat, &r->level[0].cat);
if (rc) {
- printk(KERN_ERR "security: mls: out of memory\n");
+ printk(KERN_ERR "SELinux: mls: out of memory\n");
goto bad_high;
}
}
@@ -866,7 +873,7 @@
rc = next_entry(buf, fp, sizeof buf);
if (rc < 0) {
- printk(KERN_ERR "security: context truncated\n");
+ printk(KERN_ERR "SELinux: context truncated\n");
goto out;
}
c->user = le32_to_cpu(buf[0]);
@@ -874,7 +881,7 @@
c->type = le32_to_cpu(buf[2]);
if (p->policyvers >= POLICYDB_VERSION_MLS) {
if (mls_read_range_helper(&c->range, fp)) {
- printk(KERN_ERR "security: error reading MLS range of "
+ printk(KERN_ERR "SELinux: error reading MLS range of "
"context\n");
rc = -EINVAL;
goto out;
@@ -882,7 +889,7 @@
}
if (!policydb_context_isvalid(p, c)) {
- printk(KERN_ERR "security: invalid security context\n");
+ printk(KERN_ERR "SELinux: invalid security context\n");
context_destroy(c);
rc = -EINVAL;
}
@@ -1128,7 +1135,7 @@
cladatum->comdatum = hashtab_search(p->p_commons.table,
cladatum->comkey);
if (!cladatum->comdatum) {
- printk(KERN_ERR "security: unknown common %s\n",
+ printk(KERN_ERR "SELinux: unknown common %s\n",
cladatum->comkey);
rc = -EINVAL;
goto bad;
@@ -1283,13 +1290,13 @@
rc = next_entry(buf, fp, sizeof buf);
if (rc < 0) {
- printk(KERN_ERR "security: mls: truncated level\n");
+ printk(KERN_ERR "SELinux: mls: truncated level\n");
goto bad;
}
lp->sens = le32_to_cpu(buf[0]);
if (ebitmap_read(&lp->cat, fp)) {
- printk(KERN_ERR "security: mls: error reading level "
+ printk(KERN_ERR "SELinux: mls: error reading level "
"categories\n");
goto bad;
}
@@ -1491,7 +1498,7 @@
goto bad;
if (le32_to_cpu(buf[0]) != POLICYDB_MAGIC) {
- printk(KERN_ERR "security: policydb magic number 0x%x does "
+ printk(KERN_ERR "SELinux: policydb magic number 0x%x does "
"not match expected magic number 0x%x\n",
le32_to_cpu(buf[0]), POLICYDB_MAGIC);
goto bad;
@@ -1499,27 +1506,27 @@
len = le32_to_cpu(buf[1]);
if (len != strlen(POLICYDB_STRING)) {
- printk(KERN_ERR "security: policydb string length %d does not "
+ printk(KERN_ERR "SELinux: policydb string length %d does not "
"match expected length %Zu\n",
len, strlen(POLICYDB_STRING));
goto bad;
}
policydb_str = kmalloc(len + 1,GFP_KERNEL);
if (!policydb_str) {
- printk(KERN_ERR "security: unable to allocate memory for policydb "
+ printk(KERN_ERR "SELinux: unable to allocate memory for policydb "
"string of length %d\n", len);
rc = -ENOMEM;
goto bad;
}
rc = next_entry(policydb_str, fp, len);
if (rc < 0) {
- printk(KERN_ERR "security: truncated policydb string identifier\n");
+ printk(KERN_ERR "SELinux: truncated policydb string identifier\n");
kfree(policydb_str);
goto bad;
}
policydb_str[len] = 0;
if (strcmp(policydb_str, POLICYDB_STRING)) {
- printk(KERN_ERR "security: policydb string %s does not match "
+ printk(KERN_ERR "SELinux: policydb string %s does not match "
"my string %s\n", policydb_str, POLICYDB_STRING);
kfree(policydb_str);
goto bad;
@@ -1536,7 +1543,7 @@
p->policyvers = le32_to_cpu(buf[0]);
if (p->policyvers < POLICYDB_VERSION_MIN ||
p->policyvers > POLICYDB_VERSION_MAX) {
- printk(KERN_ERR "security: policydb version %d does not match "
+ printk(KERN_ERR "SELinux: policydb version %d does not match "
"my version range %d-%d\n",
le32_to_cpu(buf[0]), POLICYDB_VERSION_MIN, POLICYDB_VERSION_MAX);
goto bad;
@@ -1570,16 +1577,20 @@
ebitmap_read(&p->policycaps, fp) != 0)
goto bad;
+ if (p->policyvers >= POLICYDB_VERSION_PERMISSIVE &&
+ ebitmap_read(&p->permissive_map, fp) != 0)
+ goto bad;
+
info = policydb_lookup_compat(p->policyvers);
if (!info) {
- printk(KERN_ERR "security: unable to find policy compat info "
+ printk(KERN_ERR "SELinux: unable to find policy compat info "
"for version %d\n", p->policyvers);
goto bad;
}
if (le32_to_cpu(buf[2]) != info->sym_num ||
le32_to_cpu(buf[3]) != info->ocon_num) {
- printk(KERN_ERR "security: policydb table sizes (%d,%d) do "
+ printk(KERN_ERR "SELinux: policydb table sizes (%d,%d) do "
"not match mine (%d,%d)\n", le32_to_cpu(buf[2]),
le32_to_cpu(buf[3]),
info->sym_num, info->ocon_num);
@@ -1823,7 +1834,7 @@
for (genfs_p = NULL, genfs = p->genfs; genfs;
genfs_p = genfs, genfs = genfs->next) {
if (strcmp(newgenfs->fstype, genfs->fstype) == 0) {
- printk(KERN_ERR "security: dup genfs "
+ printk(KERN_ERR "SELinux: dup genfs "
"fstype %s\n", newgenfs->fstype);
kfree(newgenfs->fstype);
kfree(newgenfs);
@@ -1873,7 +1884,7 @@
if (!strcmp(newc->u.name, c->u.name) &&
(!c->v.sclass || !newc->v.sclass ||
newc->v.sclass == c->v.sclass)) {
- printk(KERN_ERR "security: dup genfs "
+ printk(KERN_ERR "SELinux: dup genfs "
"entry (%s,%s)\n",
newgenfs->fstype, c->u.name);
goto bad_newc;
@@ -1931,7 +1942,7 @@
if (rc)
goto bad;
if (!mls_range_isvalid(p, &rt->target_range)) {
- printk(KERN_WARNING "security: rangetrans: invalid range\n");
+ printk(KERN_WARNING "SELinux: rangetrans: invalid range\n");
goto bad;
}
lrt = rt;
diff --git a/security/selinux/ss/policydb.h b/security/selinux/ss/policydb.h
index c4ce996..ba593a3 100644
--- a/security/selinux/ss/policydb.h
+++ b/security/selinux/ss/policydb.h
@@ -243,6 +243,8 @@
struct ebitmap policycaps;
+ struct ebitmap permissive_map;
+
unsigned int policyvers;
unsigned int reject_unknown : 1;
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index f374186..d750508 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -40,6 +40,7 @@
#include <linux/sched.h>
#include <linux/audit.h>
#include <linux/mutex.h>
+#include <linux/selinux.h>
#include <net/netlabel.h>
#include "flask.h"
@@ -61,6 +62,7 @@
unsigned int policydb_loaded_version;
int selinux_policycap_netpeer;
+int selinux_policycap_openperm;
/*
* This is declared in avc.c
@@ -412,10 +414,35 @@
return 0;
inval_class:
- printk(KERN_ERR "%s: unrecognized class %d\n", __FUNCTION__, tclass);
+ printk(KERN_ERR "%s: unrecognized class %d\n", __func__, tclass);
return -EINVAL;
}
+/*
+ * Given a sid find if the type has the permissive flag set
+ */
+int security_permissive_sid(u32 sid)
+{
+ struct context *context;
+ u32 type;
+ int rc;
+
+ POLICY_RDLOCK;
+
+ context = sidtab_search(&sidtab, sid);
+ BUG_ON(!context);
+
+ type = context->type;
+ /*
+ * we are intentionally using type here, not type-1, the 0th bit may
+ * someday indicate that we are globally setting permissive in policy.
+ */
+ rc = ebitmap_get_bit(&policydb.permissive_map, type);
+
+ POLICY_RDUNLOCK;
+ return rc;
+}
+
static int security_validtrans_handle_fail(struct context *ocontext,
struct context *ncontext,
struct context *tcontext,
@@ -680,7 +707,8 @@
}
-static int security_context_to_sid_core(char *scontext, u32 scontext_len, u32 *sid, u32 def_sid)
+static int security_context_to_sid_core(char *scontext, u32 scontext_len,
+ u32 *sid, u32 def_sid, gfp_t gfp_flags)
{
char *scontext2;
struct context context;
@@ -709,7 +737,7 @@
null suffix to the copy to avoid problems with the existing
attr package, which doesn't view the null terminator as part
of the attribute value. */
- scontext2 = kmalloc(scontext_len+1,GFP_KERNEL);
+ scontext2 = kmalloc(scontext_len+1, gfp_flags);
if (!scontext2) {
rc = -ENOMEM;
goto out;
@@ -809,7 +837,7 @@
int security_context_to_sid(char *scontext, u32 scontext_len, u32 *sid)
{
return security_context_to_sid_core(scontext, scontext_len,
- sid, SECSID_NULL);
+ sid, SECSID_NULL, GFP_KERNEL);
}
/**
@@ -829,10 +857,11 @@
* Returns -%EINVAL if the context is invalid, -%ENOMEM if insufficient
* memory is available, or 0 on success.
*/
-int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *sid, u32 def_sid)
+int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *sid,
+ u32 def_sid, gfp_t gfp_flags)
{
return security_context_to_sid_core(scontext, scontext_len,
- sid, def_sid);
+ sid, def_sid, gfp_flags);
}
static int compute_sid_handle_invalid_context(
@@ -1094,7 +1123,7 @@
continue;
if (i > p->p_classes.nprim) {
printk(KERN_INFO
- "security: class %s not defined in policy\n",
+ "SELinux: class %s not defined in policy\n",
def_class);
if (p->reject_unknown)
return -EINVAL;
@@ -1105,7 +1134,7 @@
pol_class = p->p_class_val_to_name[i-1];
if (strcmp(pol_class, def_class)) {
printk(KERN_ERR
- "security: class %d is incorrect, found %s but should be %s\n",
+ "SELinux: class %d is incorrect, found %s but should be %s\n",
i, pol_class, def_class);
return -EINVAL;
}
@@ -1123,7 +1152,7 @@
nprim = 1 << (perms->nprim - 1);
if (perm_val > nprim) {
printk(KERN_INFO
- "security: permission %s in class %s not defined in policy\n",
+ "SELinux: permission %s in class %s not defined in policy\n",
def_perm, pol_class);
if (p->reject_unknown)
return -EINVAL;
@@ -1134,14 +1163,14 @@
perdatum = hashtab_search(perms->table, def_perm);
if (perdatum == NULL) {
printk(KERN_ERR
- "security: permission %s in class %s not found in policy, bad policy\n",
+ "SELinux: permission %s in class %s not found in policy, bad policy\n",
def_perm, pol_class);
return -EINVAL;
}
pol_val = 1 << (perdatum->value - 1);
if (pol_val != perm_val) {
printk(KERN_ERR
- "security: permission %s in class %s has incorrect value\n",
+ "SELinux: permission %s in class %s has incorrect value\n",
def_perm, pol_class);
return -EINVAL;
}
@@ -1155,7 +1184,7 @@
BUG_ON(!cladatum);
if (!cladatum->comdatum) {
printk(KERN_ERR
- "security: class %s should have an inherits clause but does not\n",
+ "SELinux: class %s should have an inherits clause but does not\n",
pol_class);
return -EINVAL;
}
@@ -1170,7 +1199,7 @@
def_perm = kdefs->av_inherit[i].common_pts[j];
if (j >= perms->nprim) {
printk(KERN_INFO
- "security: permission %s in class %s not defined in policy\n",
+ "SELinux: permission %s in class %s not defined in policy\n",
def_perm, pol_class);
if (p->reject_unknown)
return -EINVAL;
@@ -1181,13 +1210,13 @@
perdatum = hashtab_search(perms->table, def_perm);
if (perdatum == NULL) {
printk(KERN_ERR
- "security: permission %s in class %s not found in policy, bad policy\n",
+ "SELinux: permission %s in class %s not found in policy, bad policy\n",
def_perm, pol_class);
return -EINVAL;
}
if (perdatum->value != j + 1) {
printk(KERN_ERR
- "security: permission %s in class %s has incorrect value\n",
+ "SELinux: permission %s in class %s has incorrect value\n",
def_perm, pol_class);
return -EINVAL;
}
@@ -1217,7 +1246,7 @@
u32 len;
context_struct_to_string(context, &s, &len);
- printk(KERN_ERR "security: context %s is invalid\n", s);
+ printk(KERN_ERR "SELinux: context %s is invalid\n", s);
kfree(s);
}
return rc;
@@ -1297,7 +1326,7 @@
bad:
context_struct_to_string(&oldc, &s, &len);
context_destroy(&oldc);
- printk(KERN_ERR "security: invalidating context %s\n", s);
+ printk(KERN_ERR "SELinux: invalidating context %s\n", s);
kfree(s);
goto out;
}
@@ -1306,6 +1335,8 @@
{
selinux_policycap_netpeer = ebitmap_get_bit(&policydb.policycaps,
POLICYDB_CAPABILITY_NETPEER);
+ selinux_policycap_openperm = ebitmap_get_bit(&policydb.policycaps,
+ POLICYDB_CAPABILITY_OPENPERM);
}
extern void selinux_complete_init(void);
@@ -1348,7 +1379,7 @@
/* Verify that the kernel defined classes are correct. */
if (validate_classes(&policydb)) {
printk(KERN_ERR
- "security: the definition of a class is incorrect\n");
+ "SELinux: the definition of a class is incorrect\n");
LOAD_UNLOCK;
sidtab_destroy(&sidtab);
policydb_destroy(&policydb);
@@ -1382,14 +1413,14 @@
/* Verify that the kernel defined classes are correct. */
if (validate_classes(&newpolicydb)) {
printk(KERN_ERR
- "security: the definition of a class is incorrect\n");
+ "SELinux: the definition of a class is incorrect\n");
rc = -EINVAL;
goto err;
}
rc = security_preserve_bools(&newpolicydb);
if (rc) {
- printk(KERN_ERR "security: unable to preserve booleans\n");
+ printk(KERN_ERR "SELinux: unable to preserve booleans\n");
goto err;
}
@@ -1441,17 +1472,11 @@
/**
* security_port_sid - Obtain the SID for a port.
- * @domain: communication domain aka address family
- * @type: socket type
* @protocol: protocol number
* @port: port number
* @out_sid: security identifier
*/
-int security_port_sid(u16 domain,
- u16 type,
- u8 protocol,
- u16 port,
- u32 *out_sid)
+int security_port_sid(u8 protocol, u16 port, u32 *out_sid)
{
struct ocontext *c;
int rc = 0;
@@ -2201,7 +2226,7 @@
match = hashtab_search(policydb.p_classes.table, class);
if (!match) {
printk(KERN_ERR "%s: unrecognized class %s\n",
- __FUNCTION__, class);
+ __func__, class);
rc = -EINVAL;
goto out;
}
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index 25ccfce..7d911a1 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -617,6 +617,18 @@
return 1; /* timeout */
}
+static int snd_es1968_ac97_wait_poll(struct es1968 *chip)
+{
+ int timeout = 100000;
+
+ while (timeout-- > 0) {
+ if (!(inb(chip->io_port + ESM_AC97_INDEX) & 1))
+ return 0;
+ }
+ snd_printd("es1968: ac97 timeout\n");
+ return 1; /* timeout */
+}
+
static void snd_es1968_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val)
{
struct es1968 *chip = ac97->private_data;
@@ -645,7 +657,7 @@
outb(reg | 0x80, chip->io_port + ESM_AC97_INDEX);
/*msleep(1);*/
- if (! snd_es1968_ac97_wait(chip)) {
+ if (!snd_es1968_ac97_wait_poll(chip)) {
data = inw(chip->io_port + ESM_AC97_DATA);
/*msleep(1);*/
}