| /* |
| * drivers/s390/s390mach.c |
| * S/390 machine check handler |
| * |
| * S390 version |
| * Copyright (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation |
| * Author(s): Ingo Adlung (adlung@de.ibm.com) |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <linux/workqueue.h> |
| #include <linux/time.h> |
| #include <linux/kthread.h> |
| |
| #include <asm/lowcore.h> |
| |
| #include "s390mach.h" |
| |
| static struct semaphore m_sem; |
| |
| extern int css_process_crw(int, int); |
| extern int chsc_process_crw(void); |
| extern int chp_process_crw(int, int); |
| extern void css_reiterate_subchannels(void); |
| |
| extern struct workqueue_struct *slow_path_wq; |
| extern struct work_struct slow_path_work; |
| |
| static NORET_TYPE void |
| s390_handle_damage(char *msg) |
| { |
| #ifdef CONFIG_SMP |
| smp_send_stop(); |
| #endif |
| disabled_wait((unsigned long) __builtin_return_address(0)); |
| for(;;); |
| } |
| |
| /* |
| * Retrieve CRWs and call function to handle event. |
| * |
| * Note : we currently process CRWs for io and chsc subchannels only |
| */ |
| static int |
| s390_collect_crw_info(void *param) |
| { |
| struct crw crw[2]; |
| int ccode, ret, slow; |
| struct semaphore *sem; |
| unsigned int chain; |
| |
| sem = (struct semaphore *)param; |
| repeat: |
| down_interruptible(sem); |
| slow = 0; |
| chain = 0; |
| while (1) { |
| if (unlikely(chain > 1)) { |
| struct crw tmp_crw; |
| |
| printk(KERN_WARNING"%s: Code does not support more " |
| "than two chained crws; please report to " |
| "linux390@de.ibm.com!\n", __FUNCTION__); |
| ccode = stcrw(&tmp_crw); |
| printk(KERN_WARNING"%s: crw reports slct=%d, oflw=%d, " |
| "chn=%d, rsc=%X, anc=%d, erc=%X, rsid=%X\n", |
| __FUNCTION__, tmp_crw.slct, tmp_crw.oflw, |
| tmp_crw.chn, tmp_crw.rsc, tmp_crw.anc, |
| tmp_crw.erc, tmp_crw.rsid); |
| printk(KERN_WARNING"%s: This was crw number %x in the " |
| "chain\n", __FUNCTION__, chain); |
| if (ccode != 0) |
| break; |
| chain = tmp_crw.chn ? chain + 1 : 0; |
| continue; |
| } |
| ccode = stcrw(&crw[chain]); |
| if (ccode != 0) |
| break; |
| printk(KERN_DEBUG "crw_info : CRW reports slct=%d, oflw=%d, " |
| "chn=%d, rsc=%X, anc=%d, erc=%X, rsid=%X\n", |
| crw[chain].slct, crw[chain].oflw, crw[chain].chn, |
| crw[chain].rsc, crw[chain].anc, crw[chain].erc, |
| crw[chain].rsid); |
| /* Check for overflows. */ |
| if (crw[chain].oflw) { |
| pr_debug("%s: crw overflow detected!\n", __FUNCTION__); |
| css_reiterate_subchannels(); |
| chain = 0; |
| slow = 1; |
| continue; |
| } |
| switch (crw[chain].rsc) { |
| case CRW_RSC_SCH: |
| if (crw[0].chn && !chain) |
| break; |
| pr_debug("source is subchannel %04X\n", crw[0].rsid); |
| ret = css_process_crw (crw[0].rsid, |
| chain ? crw[1].rsid : 0); |
| if (ret == -EAGAIN) |
| slow = 1; |
| break; |
| case CRW_RSC_MONITOR: |
| pr_debug("source is monitoring facility\n"); |
| break; |
| case CRW_RSC_CPATH: |
| pr_debug("source is channel path %02X\n", crw[0].rsid); |
| /* |
| * Check for solicited machine checks. These are |
| * created by reset channel path and need not be |
| * reported to the common I/O layer. |
| */ |
| if (crw[chain].slct) { |
| pr_debug("solicited machine check for " |
| "channel path %02X\n", crw[0].rsid); |
| break; |
| } |
| switch (crw[0].erc) { |
| case CRW_ERC_IPARM: /* Path has come. */ |
| ret = chp_process_crw(crw[0].rsid, 1); |
| break; |
| case CRW_ERC_PERRI: /* Path has gone. */ |
| case CRW_ERC_PERRN: |
| ret = chp_process_crw(crw[0].rsid, 0); |
| break; |
| default: |
| pr_debug("Don't know how to handle erc=%x\n", |
| crw[0].erc); |
| ret = 0; |
| } |
| if (ret == -EAGAIN) |
| slow = 1; |
| break; |
| case CRW_RSC_CONFIG: |
| pr_debug("source is configuration-alert facility\n"); |
| break; |
| case CRW_RSC_CSS: |
| pr_debug("source is channel subsystem\n"); |
| ret = chsc_process_crw(); |
| if (ret == -EAGAIN) |
| slow = 1; |
| break; |
| default: |
| pr_debug("unknown source\n"); |
| break; |
| } |
| /* chain is always 0 or 1 here. */ |
| chain = crw[chain].chn ? chain + 1 : 0; |
| } |
| if (slow) |
| queue_work(slow_path_wq, &slow_path_work); |
| goto repeat; |
| return 0; |
| } |
| |
| struct mcck_struct { |
| int kill_task; |
| int channel_report; |
| int warning; |
| unsigned long long mcck_code; |
| }; |
| |
| static DEFINE_PER_CPU(struct mcck_struct, cpu_mcck); |
| |
| /* |
| * Main machine check handler function. Will be called with interrupts enabled |
| * or disabled and machine checks enabled or disabled. |
| */ |
| void |
| s390_handle_mcck(void) |
| { |
| unsigned long flags; |
| struct mcck_struct mcck; |
| |
| /* |
| * Disable machine checks and get the current state of accumulated |
| * machine checks. Afterwards delete the old state and enable machine |
| * checks again. |
| */ |
| local_irq_save(flags); |
| local_mcck_disable(); |
| mcck = __get_cpu_var(cpu_mcck); |
| memset(&__get_cpu_var(cpu_mcck), 0, sizeof(struct mcck_struct)); |
| clear_thread_flag(TIF_MCCK_PENDING); |
| local_mcck_enable(); |
| local_irq_restore(flags); |
| |
| if (mcck.channel_report) |
| up(&m_sem); |
| |
| #ifdef CONFIG_MACHCHK_WARNING |
| /* |
| * The warning may remain for a prolonged period on the bare iron. |
| * (actually till the machine is powered off, or until the problem is gone) |
| * So we just stop listening for the WARNING MCH and prevent continuously |
| * being interrupted. One caveat is however, that we must do this per |
| * processor and cannot use the smp version of ctl_clear_bit(). |
| * On VM we only get one interrupt per virtally presented machinecheck. |
| * Though one suffices, we may get one interrupt per (virtual) processor. |
| */ |
| if (mcck.warning) { /* WARNING pending ? */ |
| static int mchchk_wng_posted = 0; |
| /* |
| * Use single machine clear, as we cannot handle smp right now |
| */ |
| __ctl_clear_bit(14, 24); /* Disable WARNING MCH */ |
| if (xchg(&mchchk_wng_posted, 1) == 0) |
| kill_proc(1, SIGPWR, 1); |
| } |
| #endif |
| |
| if (mcck.kill_task) { |
| local_irq_enable(); |
| printk(KERN_EMERG "mcck: Terminating task because of machine " |
| "malfunction (code 0x%016llx).\n", mcck.mcck_code); |
| printk(KERN_EMERG "mcck: task: %s, pid: %d.\n", |
| current->comm, current->pid); |
| do_exit(SIGSEGV); |
| } |
| } |
| |
| /* |
| * returns 0 if all registers could be validated |
| * returns 1 otherwise |
| */ |
| static int |
| s390_revalidate_registers(struct mci *mci) |
| { |
| int kill_task; |
| u64 tmpclock; |
| u64 zero; |
| void *fpt_save_area, *fpt_creg_save_area; |
| |
| kill_task = 0; |
| zero = 0; |
| /* General purpose registers */ |
| if (!mci->gr) |
| /* |
| * General purpose registers couldn't be restored and have |
| * unknown contents. Process needs to be terminated. |
| */ |
| kill_task = 1; |
| |
| /* Revalidate floating point registers */ |
| if (!mci->fp) |
| /* |
| * Floating point registers can't be restored and |
| * therefore the process needs to be terminated. |
| */ |
| kill_task = 1; |
| |
| #ifndef CONFIG_64BIT |
| asm volatile( |
| " ld 0,0(%0)\n" |
| " ld 2,8(%0)\n" |
| " ld 4,16(%0)\n" |
| " ld 6,24(%0)" |
| : : "a" (&S390_lowcore.floating_pt_save_area)); |
| #endif |
| |
| if (MACHINE_HAS_IEEE) { |
| #ifdef CONFIG_64BIT |
| fpt_save_area = &S390_lowcore.floating_pt_save_area; |
| fpt_creg_save_area = &S390_lowcore.fpt_creg_save_area; |
| #else |
| fpt_save_area = (void *) S390_lowcore.extended_save_area_addr; |
| fpt_creg_save_area = fpt_save_area+128; |
| #endif |
| /* Floating point control register */ |
| if (!mci->fc) { |
| /* |
| * Floating point control register can't be restored. |
| * Task will be terminated. |
| */ |
| asm volatile("lfpc 0(%0)" : : "a" (&zero), "m" (zero)); |
| kill_task = 1; |
| |
| } else |
| asm volatile("lfpc 0(%0)" : : "a" (fpt_creg_save_area)); |
| |
| asm volatile( |
| " ld 0,0(%0)\n" |
| " ld 1,8(%0)\n" |
| " ld 2,16(%0)\n" |
| " ld 3,24(%0)\n" |
| " ld 4,32(%0)\n" |
| " ld 5,40(%0)\n" |
| " ld 6,48(%0)\n" |
| " ld 7,56(%0)\n" |
| " ld 8,64(%0)\n" |
| " ld 9,72(%0)\n" |
| " ld 10,80(%0)\n" |
| " ld 11,88(%0)\n" |
| " ld 12,96(%0)\n" |
| " ld 13,104(%0)\n" |
| " ld 14,112(%0)\n" |
| " ld 15,120(%0)\n" |
| : : "a" (fpt_save_area)); |
| } |
| |
| /* Revalidate access registers */ |
| asm volatile( |
| " lam 0,15,0(%0)" |
| : : "a" (&S390_lowcore.access_regs_save_area)); |
| if (!mci->ar) |
| /* |
| * Access registers have unknown contents. |
| * Terminating task. |
| */ |
| kill_task = 1; |
| |
| /* Revalidate control registers */ |
| if (!mci->cr) |
| /* |
| * Control registers have unknown contents. |
| * Can't recover and therefore stopping machine. |
| */ |
| s390_handle_damage("invalid control registers."); |
| else |
| #ifdef CONFIG_64BIT |
| asm volatile( |
| " lctlg 0,15,0(%0)" |
| : : "a" (&S390_lowcore.cregs_save_area)); |
| #else |
| asm volatile( |
| " lctl 0,15,0(%0)" |
| : : "a" (&S390_lowcore.cregs_save_area)); |
| #endif |
| |
| /* |
| * We don't even try to revalidate the TOD register, since we simply |
| * can't write something sensible into that register. |
| */ |
| |
| #ifdef CONFIG_64BIT |
| /* |
| * See if we can revalidate the TOD programmable register with its |
| * old contents (should be zero) otherwise set it to zero. |
| */ |
| if (!mci->pr) |
| asm volatile( |
| " sr 0,0\n" |
| " sckpf" |
| : : : "0", "cc"); |
| else |
| asm volatile( |
| " l 0,0(%0)\n" |
| " sckpf" |
| : : "a" (&S390_lowcore.tod_progreg_save_area) |
| : "0", "cc"); |
| #endif |
| |
| /* Revalidate clock comparator register */ |
| asm volatile( |
| " stck 0(%1)\n" |
| " sckc 0(%1)" |
| : "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory"); |
| |
| /* Check if old PSW is valid */ |
| if (!mci->wp) |
| /* |
| * Can't tell if we come from user or kernel mode |
| * -> stopping machine. |
| */ |
| s390_handle_damage("old psw invalid."); |
| |
| if (!mci->ms || !mci->pm || !mci->ia) |
| kill_task = 1; |
| |
| return kill_task; |
| } |
| |
| #define MAX_IPD_COUNT 29 |
| #define MAX_IPD_TIME (5 * 60 * USEC_PER_SEC) /* 5 minutes */ |
| |
| /* |
| * machine check handler. |
| */ |
| void |
| s390_do_machine_check(struct pt_regs *regs) |
| { |
| static DEFINE_SPINLOCK(ipd_lock); |
| static unsigned long long last_ipd; |
| static int ipd_count; |
| unsigned long long tmp; |
| struct mci *mci; |
| struct mcck_struct *mcck; |
| int umode; |
| |
| lockdep_off(); |
| |
| mci = (struct mci *) &S390_lowcore.mcck_interruption_code; |
| mcck = &__get_cpu_var(cpu_mcck); |
| umode = user_mode(regs); |
| |
| if (mci->sd) |
| /* System damage -> stopping machine */ |
| s390_handle_damage("received system damage machine check."); |
| |
| if (mci->pd) { |
| if (mci->b) { |
| /* Processing backup -> verify if we can survive this */ |
| u64 z_mcic, o_mcic, t_mcic; |
| #ifdef CONFIG_64BIT |
| z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<29); |
| o_mcic = (1ULL<<43 | 1ULL<<42 | 1ULL<<41 | 1ULL<<40 | |
| 1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 | |
| 1ULL<<30 | 1ULL<<21 | 1ULL<<20 | 1ULL<<17 | |
| 1ULL<<16); |
| #else |
| z_mcic = (1ULL<<63 | 1ULL<<59 | 1ULL<<57 | 1ULL<<50 | |
| 1ULL<<29); |
| o_mcic = (1ULL<<43 | 1ULL<<42 | 1ULL<<41 | 1ULL<<40 | |
| 1ULL<<36 | 1ULL<<35 | 1ULL<<34 | 1ULL<<32 | |
| 1ULL<<30 | 1ULL<<20 | 1ULL<<17 | 1ULL<<16); |
| #endif |
| t_mcic = *(u64 *)mci; |
| |
| if (((t_mcic & z_mcic) != 0) || |
| ((t_mcic & o_mcic) != o_mcic)) { |
| s390_handle_damage("processing backup machine " |
| "check with damage."); |
| } |
| |
| /* |
| * Nullifying exigent condition, therefore we might |
| * retry this instruction. |
| */ |
| |
| spin_lock(&ipd_lock); |
| |
| tmp = get_clock(); |
| |
| if (((tmp - last_ipd) >> 12) < MAX_IPD_TIME) |
| ipd_count++; |
| else |
| ipd_count = 1; |
| |
| last_ipd = tmp; |
| |
| if (ipd_count == MAX_IPD_COUNT) |
| s390_handle_damage("too many ipd retries."); |
| |
| spin_unlock(&ipd_lock); |
| } |
| else { |
| /* Processing damage -> stopping machine */ |
| s390_handle_damage("received instruction processing " |
| "damage machine check."); |
| } |
| } |
| if (s390_revalidate_registers(mci)) { |
| if (umode) { |
| /* |
| * Couldn't restore all register contents while in |
| * user mode -> mark task for termination. |
| */ |
| mcck->kill_task = 1; |
| mcck->mcck_code = *(unsigned long long *) mci; |
| set_thread_flag(TIF_MCCK_PENDING); |
| } |
| else |
| /* |
| * Couldn't restore all register contents while in |
| * kernel mode -> stopping machine. |
| */ |
| s390_handle_damage("unable to revalidate registers."); |
| } |
| |
| if (mci->se) |
| /* Storage error uncorrected */ |
| s390_handle_damage("received storage error uncorrected " |
| "machine check."); |
| |
| if (mci->ke) |
| /* Storage key-error uncorrected */ |
| s390_handle_damage("received storage key-error uncorrected " |
| "machine check."); |
| |
| if (mci->ds && mci->fa) |
| /* Storage degradation */ |
| s390_handle_damage("received storage degradation machine " |
| "check."); |
| |
| if (mci->cp) { |
| /* Channel report word pending */ |
| mcck->channel_report = 1; |
| set_thread_flag(TIF_MCCK_PENDING); |
| } |
| |
| if (mci->w) { |
| /* Warning pending */ |
| mcck->warning = 1; |
| set_thread_flag(TIF_MCCK_PENDING); |
| } |
| lockdep_on(); |
| } |
| |
| /* |
| * s390_init_machine_check |
| * |
| * initialize machine check handling |
| */ |
| static int |
| machine_check_init(void) |
| { |
| init_MUTEX_LOCKED(&m_sem); |
| ctl_clear_bit(14, 25); /* disable external damage MCH */ |
| ctl_set_bit(14, 27); /* enable system recovery MCH */ |
| #ifdef CONFIG_MACHCHK_WARNING |
| ctl_set_bit(14, 24); /* enable warning MCH */ |
| #endif |
| return 0; |
| } |
| |
| /* |
| * Initialize the machine check handler really early to be able to |
| * catch all machine checks that happen during boot |
| */ |
| arch_initcall(machine_check_init); |
| |
| /* |
| * Machine checks for the channel subsystem must be enabled |
| * after the channel subsystem is initialized |
| */ |
| static int __init |
| machine_check_crw_init (void) |
| { |
| kthread_run(s390_collect_crw_info, &m_sem, "kmcheck"); |
| ctl_set_bit(14, 28); /* enable channel report MCH */ |
| return 0; |
| } |
| |
| device_initcall (machine_check_crw_init); |