Merge branch 'upstream-fixes'
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 320e765..15dc2e0 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -163,7 +163,7 @@
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
zalon7xx-objs := zalon.o ncr53c8xx.o
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
-libata-objs := libata-core.o libata-scsi.o
+libata-objs := libata-core.o libata-scsi.o libata-bmdma.o
oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o
# Files generated that shall be removed upon make clean
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index a800fb5..1c2ab3d 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -66,6 +66,8 @@
AHCI_IRQ_ON_SG = (1 << 31),
AHCI_CMD_ATAPI = (1 << 5),
AHCI_CMD_WRITE = (1 << 6),
+ AHCI_CMD_RESET = (1 << 8),
+ AHCI_CMD_CLR_BUSY = (1 << 10),
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
@@ -85,6 +87,7 @@
/* HOST_CAP bits */
HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
+ HOST_CAP_CLO = (1 << 24), /* Command List Override support */
/* registers for each SATA port */
PORT_LST_ADDR = 0x00, /* command list DMA addr */
@@ -138,6 +141,7 @@
PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
+ PORT_CMD_CLO = (1 << 3), /* Command list override */
PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
@@ -184,9 +188,9 @@
static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
-static int ahci_qc_issue(struct ata_queued_cmd *qc);
+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
-static void ahci_phy_reset(struct ata_port *ap);
+static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes);
static void ahci_irq_clear(struct ata_port *ap);
static void ahci_eng_timeout(struct ata_port *ap);
static int ahci_port_start(struct ata_port *ap);
@@ -202,11 +206,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = AHCI_MAX_SG,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = AHCI_USE_CLUSTERING,
@@ -225,7 +229,7 @@
.tf_read = ahci_tf_read,
- .phy_reset = ahci_phy_reset,
+ .probe_reset = ahci_probe_reset,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
@@ -247,8 +251,7 @@
{
.sht = &ahci_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- ATA_FLAG_PIO_DMA,
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
@@ -450,17 +453,48 @@
writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
-static void ahci_phy_reset(struct ata_port *ap)
+static int ahci_stop_engine(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->host_set->mmio_base;
+ void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+ int work;
+ u32 tmp;
+
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp &= ~PORT_CMD_START;
+ writel(tmp, port_mmio + PORT_CMD);
+
+ /* wait for engine to stop. TODO: this could be
+ * as long as 500 msec
+ */
+ work = 1000;
+ while (work-- > 0) {
+ tmp = readl(port_mmio + PORT_CMD);
+ if ((tmp & PORT_CMD_LIST_ON) == 0)
+ return 0;
+ udelay(10);
+ }
+
+ return -EIO;
+}
+
+static void ahci_start_engine(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->host_set->mmio_base;
+ void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+ u32 tmp;
+
+ tmp = readl(port_mmio + PORT_CMD);
+ tmp |= PORT_CMD_START;
+ writel(tmp, port_mmio + PORT_CMD);
+ readl(port_mmio + PORT_CMD); /* flush */
+}
+
+static unsigned int ahci_dev_classify(struct ata_port *ap)
{
void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
struct ata_taskfile tf;
- struct ata_device *dev = &ap->device[0];
- u32 new_tmp, tmp;
-
- __sata_phy_reset(ap);
-
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
- return;
+ u32 tmp;
tmp = readl(port_mmio + PORT_SIG);
tf.lbah = (tmp >> 24) & 0xff;
@@ -468,15 +502,46 @@
tf.lbal = (tmp >> 8) & 0xff;
tf.nsect = (tmp) & 0xff;
- dev->class = ata_dev_classify(&tf);
- if (!ata_dev_present(dev)) {
- ata_port_disable(ap);
- return;
- }
+ return ata_dev_classify(&tf);
+}
+
+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, u32 opts)
+{
+ pp->cmd_slot[0].opts = cpu_to_le32(opts);
+ pp->cmd_slot[0].status = 0;
+ pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff);
+ pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16);
+}
+
+static int ahci_hardreset(struct ata_port *ap, int verbose, unsigned int *class)
+{
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ ahci_stop_engine(ap);
+ rc = sata_std_hardreset(ap, verbose, class);
+ ahci_start_engine(ap);
+
+ if (rc == 0)
+ *class = ahci_dev_classify(ap);
+ if (*class == ATA_DEV_UNKNOWN)
+ *class = ATA_DEV_NONE;
+
+ DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
+ return rc;
+}
+
+static void ahci_postreset(struct ata_port *ap, unsigned int *class)
+{
+ void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
+ u32 new_tmp, tmp;
+
+ ata_std_postreset(ap, class);
/* Make sure port's ATAPI bit is set appropriately */
new_tmp = tmp = readl(port_mmio + PORT_CMD);
- if (dev->class == ATA_DEV_ATAPI)
+ if (*class == ATA_DEV_ATAPI)
new_tmp |= PORT_CMD_ATAPI;
else
new_tmp &= ~PORT_CMD_ATAPI;
@@ -486,6 +551,12 @@
}
}
+static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes)
+{
+ return ata_drive_probe_reset(ap, NULL, NULL, ahci_hardreset,
+ ahci_postreset, classes);
+}
+
static u8 ahci_check_status(struct ata_port *ap)
{
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
@@ -533,42 +604,36 @@
{
struct ata_port *ap = qc->ap;
struct ahci_port_priv *pp = ap->private_data;
+ int is_atapi = is_atapi_taskfile(&qc->tf);
u32 opts;
const u32 cmd_fis_len = 5; /* five dwords */
unsigned int n_elem;
/*
- * Fill in command slot information (currently only one slot,
- * slot 0, is currently since we don't do queueing)
- */
-
- opts = cmd_fis_len;
- if (qc->tf.flags & ATA_TFLAG_WRITE)
- opts |= AHCI_CMD_WRITE;
- if (is_atapi_taskfile(&qc->tf))
- opts |= AHCI_CMD_ATAPI;
-
- pp->cmd_slot[0].opts = cpu_to_le32(opts);
- pp->cmd_slot[0].status = 0;
- pp->cmd_slot[0].tbl_addr = cpu_to_le32(pp->cmd_tbl_dma & 0xffffffff);
- pp->cmd_slot[0].tbl_addr_hi = cpu_to_le32((pp->cmd_tbl_dma >> 16) >> 16);
-
- /*
* Fill in command table information. First, the header,
* a SATA Register - Host to Device command FIS.
*/
ata_tf_to_fis(&qc->tf, pp->cmd_tbl, 0);
- if (opts & AHCI_CMD_ATAPI) {
+ if (is_atapi) {
memset(pp->cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
- memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, ap->cdb_len);
+ memcpy(pp->cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb,
+ qc->dev->cdb_len);
}
- if (!(qc->flags & ATA_QCFLAG_DMAMAP))
- return;
+ n_elem = 0;
+ if (qc->flags & ATA_QCFLAG_DMAMAP)
+ n_elem = ahci_fill_sg(qc);
- n_elem = ahci_fill_sg(qc);
+ /*
+ * Fill in command slot information.
+ */
+ opts = cmd_fis_len | n_elem << 16;
+ if (qc->tf.flags & ATA_TFLAG_WRITE)
+ opts |= AHCI_CMD_WRITE;
+ if (is_atapi)
+ opts |= AHCI_CMD_ATAPI;
- pp->cmd_slot[0].opts |= cpu_to_le32(n_elem << 16);
+ ahci_fill_cmd_slot(pp, opts);
}
static void ahci_restart_port(struct ata_port *ap, u32 irq_stat)
@@ -576,7 +641,6 @@
void __iomem *mmio = ap->host_set->mmio_base;
void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
u32 tmp;
- int work;
if ((ap->device[0].class != ATA_DEV_ATAPI) ||
((irq_stat & PORT_IRQ_TF_ERR) == 0))
@@ -592,20 +656,7 @@
readl(port_mmio + PORT_SCR_ERR));
/* stop DMA */
- tmp = readl(port_mmio + PORT_CMD);
- tmp &= ~PORT_CMD_START;
- writel(tmp, port_mmio + PORT_CMD);
-
- /* wait for engine to stop. TODO: this could be
- * as long as 500 msec
- */
- work = 1000;
- while (work-- > 0) {
- tmp = readl(port_mmio + PORT_CMD);
- if ((tmp & PORT_CMD_LIST_ON) == 0)
- break;
- udelay(10);
- }
+ ahci_stop_engine(ap);
/* clear SATA phy error, if any */
tmp = readl(port_mmio + PORT_SCR_ERR);
@@ -624,10 +675,7 @@
}
/* re-start DMA */
- tmp = readl(port_mmio + PORT_CMD);
- tmp |= PORT_CMD_START;
- writel(tmp, port_mmio + PORT_CMD);
- readl(port_mmio + PORT_CMD); /* flush */
+ ahci_start_engine(ap);
}
static void ahci_eng_timeout(struct ata_port *ap)
@@ -642,25 +690,13 @@
spin_lock_irqsave(&host_set->lock, flags);
+ ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT));
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (!qc) {
- printk(KERN_ERR "ata%u: BUG: timeout without command\n",
- ap->id);
- } else {
- ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT));
-
- /* hack alert! We cannot use the supplied completion
- * function from inside the ->eh_strategy_handler() thread.
- * libata is the only user of ->eh_strategy_handler() in
- * any kernel, so the default scsi_done() assumes it is
- * not being called from the SCSI EH.
- */
- qc->scsidone = scsi_finish_command;
- qc->err_mask |= AC_ERR_OTHER;
- ata_qc_complete(qc);
- }
+ qc->err_mask |= AC_ERR_TIMEOUT;
spin_unlock_irqrestore(&host_set->lock, flags);
+
+ ata_eh_qc_complete(qc);
}
static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
@@ -678,7 +714,7 @@
ci = readl(port_mmio + PORT_CMD_ISSUE);
if (likely((ci & 0x1) == 0)) {
if (qc) {
- assert(qc->err_mask == 0);
+ WARN_ON(qc->err_mask);
ata_qc_complete(qc);
qc = NULL;
}
@@ -697,7 +733,7 @@
ahci_restart_port(ap, status);
if (qc) {
- qc->err_mask |= AC_ERR_OTHER;
+ qc->err_mask |= err_mask;
ata_qc_complete(qc);
}
}
@@ -776,7 +812,7 @@
return IRQ_RETVAL(handled);
}
-static int ahci_qc_issue(struct ata_queued_cmd *qc)
+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index fc3ca05..c662bf5 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -101,9 +101,11 @@
ICH5_PCS = 0x92, /* port control and status */
PIIX_SCC = 0x0A, /* sub-class code register */
- PIIX_FLAG_AHCI = (1 << 28), /* AHCI possible */
- PIIX_FLAG_CHECKINTR = (1 << 29), /* make sure PCI INTx enabled */
- PIIX_FLAG_COMBINED = (1 << 30), /* combined mode possible */
+ PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
+ PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
+ PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */
+ /* ICH6/7 use different scheme for map value */
+ PIIX_FLAG_COMBINED_ICH6 = PIIX_FLAG_COMBINED | (1 << 30),
/* combined mode. if set, PATA is channel 0.
* if clear, PATA is channel 1.
@@ -129,8 +131,8 @@
static int piix_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent);
-static void piix_pata_phy_reset(struct ata_port *ap);
-static void piix_sata_phy_reset(struct ata_port *ap);
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes);
+static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes);
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
@@ -178,11 +180,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -205,7 +207,7 @@
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = piix_pata_phy_reset,
+ .probe_reset = piix_pata_probe_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -233,7 +235,7 @@
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = piix_sata_phy_reset,
+ .probe_reset = piix_sata_probe_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -256,8 +258,7 @@
/* ich5_pata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
- PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
#if 0
.mwdma_mask = 0x06, /* mwdma1-2 */
@@ -271,8 +272,8 @@
/* ich5_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED |
+ PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
@@ -282,7 +283,7 @@
/* piix4_pata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .host_flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
#if 0
.mwdma_mask = 0x06, /* mwdma1-2 */
@@ -296,9 +297,8 @@
/* ich6_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
- ATA_FLAG_SLAVE_POSS,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
+ PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
@@ -308,9 +308,9 @@
/* ich6_sata_ahci */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR |
- ATA_FLAG_SLAVE_POSS | PIIX_FLAG_AHCI,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
+ PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS |
+ PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
@@ -363,30 +363,42 @@
}
/**
- * piix_pata_phy_reset - Probe specified port on PATA host controller
- * @ap: Port to probe
+ * piix_pata_probeinit - probeinit for PATA host controller
+ * @ap: Target port
*
- * Probe PATA phy.
+ * Probeinit including cable detection.
*
* LOCKING:
* None (inherited from caller).
*/
+static void piix_pata_probeinit(struct ata_port *ap)
+{
+ piix_pata_cbl_detect(ap);
+ ata_std_probeinit(ap);
+}
-static void piix_pata_phy_reset(struct ata_port *ap)
+/**
+ * piix_pata_probe_reset - Perform reset on PATA port and classify
+ * @ap: Port to reset
+ * @classes: Resulting classes of attached devices
+ *
+ * Reset PATA phy and classify attached devices.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
- ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return;
+ return 0;
}
- piix_pata_cbl_detect(ap);
-
- ata_port_probe(ap);
-
- ata_bus_reset(ap);
+ return ata_drive_probe_reset(ap, piix_pata_probeinit,
+ ata_std_softreset, NULL,
+ ata_std_postreset, classes);
}
/**
@@ -411,9 +423,6 @@
int orig_mask, mask, i;
u8 pcs;
- mask = (PIIX_PORT_PRESENT << ap->hard_port_no) |
- (PIIX_PORT_ENABLED << ap->hard_port_no);
-
pci_read_config_byte(pdev, ICH5_PCS, &pcs);
orig_mask = (int) pcs & 0xff;
@@ -437,28 +446,25 @@
}
/**
- * piix_sata_phy_reset - Probe specified port on SATA host controller
- * @ap: Port to probe
+ * piix_sata_probe_reset - Perform reset on SATA port and classify
+ * @ap: Port to reset
+ * @classes: Resulting classes of attached devices
*
- * Probe SATA phy.
+ * Reset SATA phy and classify attached devices.
*
* LOCKING:
* None (inherited from caller).
*/
-
-static void piix_sata_phy_reset(struct ata_port *ap)
+static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes)
{
if (!piix_sata_probe(ap)) {
- ata_port_disable(ap);
printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id);
- return;
+ return 0;
}
- ap->cbl = ATA_CBL_SATA;
-
- ata_port_probe(ap);
-
- ata_bus_reset(ap);
+ return ata_drive_probe_reset(ap, ata_std_probeinit,
+ ata_std_softreset, NULL,
+ ata_std_postreset, classes);
}
/**
@@ -627,6 +633,7 @@
/**
* piix_check_450nx_errata - Check for problem 450NX setup
+ * @ata_dev: the PCI device to check
*
* Check for the present of 450NX errata #19 and errata #25. If
* they are found return an error code so we can turn off DMA
@@ -680,6 +687,7 @@
struct ata_port_info *port_info[2];
unsigned int combined = 0;
unsigned int pata_chan = 0, sata_chan = 0;
+ unsigned long host_flags;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
@@ -692,7 +700,9 @@
port_info[0] = &piix_port_info[ent->driver_data];
port_info[1] = &piix_port_info[ent->driver_data];
- if (port_info[0]->host_flags & PIIX_FLAG_AHCI) {
+ host_flags = port_info[0]->host_flags;
+
+ if (host_flags & PIIX_FLAG_AHCI) {
u8 tmp;
pci_read_config_byte(pdev, PIIX_SCC, &tmp);
if (tmp == PIIX_AHCI_DEVICE) {
@@ -702,16 +712,35 @@
}
}
- if (port_info[0]->host_flags & PIIX_FLAG_COMBINED) {
+ if (host_flags & PIIX_FLAG_COMBINED) {
u8 tmp;
pci_read_config_byte(pdev, ICH5_PMR, &tmp);
- if (tmp & PIIX_COMB) {
- combined = 1;
- if (tmp & PIIX_COMB_PATA_P0)
+ if (host_flags & PIIX_FLAG_COMBINED_ICH6) {
+ switch (tmp & 0x3) {
+ case 0:
+ break;
+ case 1:
+ combined = 1;
sata_chan = 1;
- else
+ break;
+ case 2:
+ combined = 1;
pata_chan = 1;
+ break;
+ case 3:
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "invalid MAP value %u\n", tmp);
+ break;
+ }
+ } else {
+ if (tmp & PIIX_COMB) {
+ combined = 1;
+ if (tmp & PIIX_COMB_PATA_P0)
+ sata_chan = 1;
+ else
+ pata_chan = 1;
+ }
}
}
@@ -721,7 +750,7 @@
* MSI is disabled (and it is disabled, as we don't use
* message-signalled interrupts currently).
*/
- if (port_info[0]->host_flags & PIIX_FLAG_CHECKINTR)
+ if (host_flags & PIIX_FLAG_CHECKINTR)
pci_intx(pdev, 1);
if (combined) {
diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c
new file mode 100644
index 0000000..a93336a
--- /dev/null
+++ b/drivers/scsi/libata-bmdma.c
@@ -0,0 +1,703 @@
+/*
+ * libata-bmdma.c - helper library for PCI IDE BMDMA
+ *
+ * Maintained by: Jeff Garzik <jgarzik@pobox.com>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2003-2006 Red Hat, Inc. All rights reserved.
+ * Copyright 2003-2006 Jeff Garzik
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * Hardware documentation available from http://www.t13.org/ and
+ * http://www.sata-io.org/
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/libata.h>
+
+#include "libata.h"
+
+/**
+ * ata_tf_load_pio - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ if (tf->ctl != ap->last_ctl) {
+ outb(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ }
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ outb(tf->hob_feature, ioaddr->feature_addr);
+ outb(tf->hob_nsect, ioaddr->nsect_addr);
+ outb(tf->hob_lbal, ioaddr->lbal_addr);
+ outb(tf->hob_lbam, ioaddr->lbam_addr);
+ outb(tf->hob_lbah, ioaddr->lbah_addr);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
+
+ if (is_addr) {
+ outb(tf->feature, ioaddr->feature_addr);
+ outb(tf->nsect, ioaddr->nsect_addr);
+ outb(tf->lbal, ioaddr->lbal_addr);
+ outb(tf->lbam, ioaddr->lbam_addr);
+ outb(tf->lbah, ioaddr->lbah_addr);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ outb(tf->device, ioaddr->device_addr);
+ VPRINTK("device 0x%X\n", tf->device);
+ }
+
+ ata_wait_idle(ap);
+}
+
+/**
+ * ata_tf_load_mmio - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller using MMIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ if (tf->ctl != ap->last_ctl) {
+ writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ }
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr);
+ writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr);
+ writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr);
+ writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr);
+ writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
+
+ if (is_addr) {
+ writeb(tf->feature, (void __iomem *) ioaddr->feature_addr);
+ writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
+ writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
+ writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
+ writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ writeb(tf->device, (void __iomem *) ioaddr->device_addr);
+ VPRINTK("device 0x%X\n", tf->device);
+ }
+
+ ata_wait_idle(ap);
+}
+
+
+/**
+ * ata_tf_load - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller using MMIO
+ * or PIO as indicated by the ATA_FLAG_MMIO flag.
+ * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
+ * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
+ * hob_lbal, hob_lbam, and hob_lbah.
+ *
+ * This function waits for idle (!BUSY and !DRQ) after writing
+ * registers. If the control register has a new value, this
+ * function also waits for idle after writing control and before
+ * writing the remaining registers.
+ *
+ * May be used as the tf_load() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_tf_load_mmio(ap, tf);
+ else
+ ata_tf_load_pio(ap, tf);
+}
+
+/**
+ * ata_exec_command_pio - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues PIO write to ATA command register, with proper
+ * synchronization with interrupt handler / other threads.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
+
+ outb(tf->command, ap->ioaddr.command_addr);
+ ata_pause(ap);
+}
+
+
+/**
+ * ata_exec_command_mmio - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues MMIO write to ATA command register, with proper
+ * synchronization with interrupt handler / other threads.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
+
+ writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr);
+ ata_pause(ap);
+}
+
+
+/**
+ * ata_exec_command - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues PIO/MMIO write to ATA command register, with proper
+ * synchronization with interrupt handler / other threads.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_exec_command_mmio(ap, tf);
+ else
+ ata_exec_command_pio(ap, tf);
+}
+
+/**
+ * ata_tf_read_pio - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Reads ATA taskfile registers for currently-selected device
+ * into @tf.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ tf->command = ata_check_status(ap);
+ tf->feature = inb(ioaddr->error_addr);
+ tf->nsect = inb(ioaddr->nsect_addr);
+ tf->lbal = inb(ioaddr->lbal_addr);
+ tf->lbam = inb(ioaddr->lbam_addr);
+ tf->lbah = inb(ioaddr->lbah_addr);
+ tf->device = inb(ioaddr->device_addr);
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
+ tf->hob_feature = inb(ioaddr->error_addr);
+ tf->hob_nsect = inb(ioaddr->nsect_addr);
+ tf->hob_lbal = inb(ioaddr->lbal_addr);
+ tf->hob_lbam = inb(ioaddr->lbam_addr);
+ tf->hob_lbah = inb(ioaddr->lbah_addr);
+ }
+}
+
+/**
+ * ata_tf_read_mmio - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Reads ATA taskfile registers for currently-selected device
+ * into @tf via MMIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ tf->command = ata_check_status(ap);
+ tf->feature = readb((void __iomem *)ioaddr->error_addr);
+ tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
+ tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
+ tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
+ tf->lbah = readb((void __iomem *)ioaddr->lbah_addr);
+ tf->device = readb((void __iomem *)ioaddr->device_addr);
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr);
+ tf->hob_feature = readb((void __iomem *)ioaddr->error_addr);
+ tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr);
+ tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr);
+ tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr);
+ tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr);
+ }
+}
+
+
+/**
+ * ata_tf_read - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Reads ATA taskfile registers for currently-selected device
+ * into @tf.
+ *
+ * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48
+ * is set, also reads the hob registers.
+ *
+ * May be used as the tf_read() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_tf_read_mmio(ap, tf);
+ else
+ ata_tf_read_pio(ap, tf);
+}
+
+/**
+ * ata_check_status_pio - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile status register for currently-selected device
+ * and return its value. This also clears pending interrupts
+ * from this device
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 ata_check_status_pio(struct ata_port *ap)
+{
+ return inb(ap->ioaddr.status_addr);
+}
+
+/**
+ * ata_check_status_mmio - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile status register for currently-selected device
+ * via MMIO and return its value. This also clears pending interrupts
+ * from this device
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 ata_check_status_mmio(struct ata_port *ap)
+{
+ return readb((void __iomem *) ap->ioaddr.status_addr);
+}
+
+
+/**
+ * ata_check_status - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile status register for currently-selected device
+ * and return its value. This also clears pending interrupts
+ * from this device
+ *
+ * May be used as the check_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+u8 ata_check_status(struct ata_port *ap)
+{
+ if (ap->flags & ATA_FLAG_MMIO)
+ return ata_check_status_mmio(ap);
+ return ata_check_status_pio(ap);
+}
+
+
+/**
+ * ata_altstatus - Read device alternate status reg
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile alternate status register for
+ * currently-selected device and return its value.
+ *
+ * Note: may NOT be used as the check_altstatus() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+u8 ata_altstatus(struct ata_port *ap)
+{
+ if (ap->ops->check_altstatus)
+ return ap->ops->check_altstatus(ap);
+
+ if (ap->flags & ATA_FLAG_MMIO)
+ return readb((void __iomem *)ap->ioaddr.altstatus_addr);
+ return inb(ap->ioaddr.altstatus_addr);
+}
+
+#ifdef CONFIG_PCI
+static struct ata_probe_ent *
+ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
+{
+ struct ata_probe_ent *probe_ent;
+
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
+ if (!probe_ent) {
+ printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
+ kobject_name(&(dev->kobj)));
+ return NULL;
+ }
+
+ INIT_LIST_HEAD(&probe_ent->node);
+ probe_ent->dev = dev;
+
+ probe_ent->sht = port->sht;
+ probe_ent->host_flags = port->host_flags;
+ probe_ent->pio_mask = port->pio_mask;
+ probe_ent->mwdma_mask = port->mwdma_mask;
+ probe_ent->udma_mask = port->udma_mask;
+ probe_ent->port_ops = port->port_ops;
+
+ return probe_ent;
+}
+
+
+/**
+ * ata_pci_init_native_mode - Initialize native-mode driver
+ * @pdev: pci device to be initialized
+ * @port: array[2] of pointers to port info structures.
+ * @ports: bitmap of ports present
+ *
+ * Utility function which allocates and initializes an
+ * ata_probe_ent structure for a standard dual-port
+ * PIO-based IDE controller. The returned ata_probe_ent
+ * structure can be passed to ata_device_add(). The returned
+ * ata_probe_ent structure should then be freed with kfree().
+ *
+ * The caller need only pass the address of the primary port, the
+ * secondary will be deduced automatically. If the device has non
+ * standard secondary port mappings this function can be called twice,
+ * once for each interface.
+ */
+
+struct ata_probe_ent *
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
+{
+ struct ata_probe_ent *probe_ent =
+ ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ int p = 0;
+
+ if (!probe_ent)
+ return NULL;
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->private_data = port[0]->private_data;
+
+ if (ports & ATA_PORT_PRIMARY) {
+ probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
+ probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
+ ata_std_ports(&probe_ent->port[p]);
+ p++;
+ }
+
+ if (ports & ATA_PORT_SECONDARY) {
+ probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
+ probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8;
+ ata_std_ports(&probe_ent->port[p]);
+ p++;
+ }
+
+ probe_ent->n_ports = p;
+ return probe_ent;
+}
+
+
+static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
+ struct ata_port_info *port, int port_num)
+{
+ struct ata_probe_ent *probe_ent;
+
+ probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
+ if (!probe_ent)
+ return NULL;
+
+ probe_ent->legacy_mode = 1;
+ probe_ent->n_ports = 1;
+ probe_ent->hard_port_no = port_num;
+ probe_ent->private_data = port->private_data;
+
+ switch(port_num)
+ {
+ case 0:
+ probe_ent->irq = 14;
+ probe_ent->port[0].cmd_addr = 0x1f0;
+ probe_ent->port[0].altstatus_addr =
+ probe_ent->port[0].ctl_addr = 0x3f6;
+ break;
+ case 1:
+ probe_ent->irq = 15;
+ probe_ent->port[0].cmd_addr = 0x170;
+ probe_ent->port[0].altstatus_addr =
+ probe_ent->port[0].ctl_addr = 0x376;
+ break;
+ }
+
+ probe_ent->port[0].bmdma_addr =
+ pci_resource_start(pdev, 4) + 8 * port_num;
+ ata_std_ports(&probe_ent->port[0]);
+
+ return probe_ent;
+}
+
+
+/**
+ * ata_pci_init_one - Initialize/register PCI IDE host controller
+ * @pdev: Controller to be initialized
+ * @port_info: Information from low-level host driver
+ * @n_ports: Number of ports attached to host controller
+ *
+ * This is a helper function which can be called from a driver's
+ * xxx_init_one() probe function if the hardware uses traditional
+ * IDE taskfile registers.
+ *
+ * This function calls pci_enable_device(), reserves its register
+ * regions, sets the dma mask, enables bus master mode, and calls
+ * ata_device_add()
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, negative on errno-based value on error.
+ */
+
+int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
+ unsigned int n_ports)
+{
+ struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL;
+ struct ata_port_info *port[2];
+ u8 tmp8, mask;
+ unsigned int legacy_mode = 0;
+ int disable_dev_on_err = 1;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ port[0] = port_info[0];
+ if (n_ports > 1)
+ port[1] = port_info[1];
+ else
+ port[1] = port[0];
+
+ if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0
+ && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
+ /* TODO: What if one channel is in native mode ... */
+ pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
+ mask = (1 << 2) | (1 << 0);
+ if ((tmp8 & mask) != mask)
+ legacy_mode = (1 << 3);
+ }
+
+ /* FIXME... */
+ if ((!legacy_mode) && (n_ports > 2)) {
+ printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n");
+ n_ports = 2;
+ /* For now */
+ }
+
+ /* FIXME: Really for ATA it isn't safe because the device may be
+ multi-purpose and we want to leave it alone if it was already
+ enabled. Secondly for shared use as Arjan says we want refcounting
+
+ Checking dev->is_enabled is insufficient as this is not set at
+ boot for the primary video which is BIOS enabled
+ */
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc) {
+ disable_dev_on_err = 0;
+ goto err_out;
+ }
+
+ /* FIXME: Should use platform specific mappers for legacy port ranges */
+ if (legacy_mode) {
+ if (!request_region(0x1f0, 8, "libata")) {
+ struct resource *conflict, res;
+ res.start = 0x1f0;
+ res.end = 0x1f0 + 8 - 1;
+ conflict = ____request_resource(&ioport_resource, &res);
+ if (!strcmp(conflict->name, "libata"))
+ legacy_mode |= (1 << 0);
+ else {
+ disable_dev_on_err = 0;
+ printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n");
+ }
+ } else
+ legacy_mode |= (1 << 0);
+
+ if (!request_region(0x170, 8, "libata")) {
+ struct resource *conflict, res;
+ res.start = 0x170;
+ res.end = 0x170 + 8 - 1;
+ conflict = ____request_resource(&ioport_resource, &res);
+ if (!strcmp(conflict->name, "libata"))
+ legacy_mode |= (1 << 1);
+ else {
+ disable_dev_on_err = 0;
+ printk(KERN_WARNING "ata: 0x170 IDE port busy\n");
+ }
+ } else
+ legacy_mode |= (1 << 1);
+ }
+
+ /* we have legacy mode, but all ports are unavailable */
+ if (legacy_mode == (1 << 3)) {
+ rc = -EBUSY;
+ goto err_out_regions;
+ }
+
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+
+ if (legacy_mode) {
+ if (legacy_mode & (1 << 0))
+ probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0);
+ if (legacy_mode & (1 << 1))
+ probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1);
+ } else {
+ if (n_ports == 2)
+ probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ else
+ probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
+ }
+ if (!probe_ent && !probe_ent2) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ pci_set_master(pdev);
+
+ /* FIXME: check ata_device_add return */
+ if (legacy_mode) {
+ if (legacy_mode & (1 << 0))
+ ata_device_add(probe_ent);
+ if (legacy_mode & (1 << 1))
+ ata_device_add(probe_ent2);
+ } else
+ ata_device_add(probe_ent);
+
+ kfree(probe_ent);
+ kfree(probe_ent2);
+
+ return 0;
+
+err_out_regions:
+ if (legacy_mode & (1 << 0))
+ release_region(0x1f0, 8);
+ if (legacy_mode & (1 << 1))
+ release_region(0x170, 8);
+ pci_release_regions(pdev);
+err_out:
+ if (disable_dev_on_err)
+ pci_disable_device(pdev);
+ return rc;
+}
+
+#endif /* CONFIG_PCI */
+
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 5f1d758..70efde9 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -61,11 +61,9 @@
#include "libata.h"
-static unsigned int ata_busy_sleep (struct ata_port *ap,
- unsigned long tmout_pat,
- unsigned long tmout);
static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev);
-static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev);
+static unsigned int ata_dev_init_params(struct ata_port *ap,
+ struct ata_device *dev);
static void ata_set_mode(struct ata_port *ap);
static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev);
static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift);
@@ -73,7 +71,6 @@
static int ata_choose_xfer_mode(const struct ata_port *ap,
u8 *xfer_mode_out,
unsigned int *xfer_shift_out);
-static void __ata_qc_complete(struct ata_queued_cmd *qc);
static unsigned int ata_unique_id = 1;
static struct workqueue_struct *ata_wq;
@@ -87,403 +84,6 @@
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
-/**
- * ata_tf_load_pio - send taskfile registers to host controller
- * @ap: Port to which output is sent
- * @tf: ATA taskfile register set
- *
- * Outputs ATA taskfile to standard ATA host controller.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
- if (tf->ctl != ap->last_ctl) {
- outb(tf->ctl, ioaddr->ctl_addr);
- ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
- }
-
- if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- outb(tf->hob_feature, ioaddr->feature_addr);
- outb(tf->hob_nsect, ioaddr->nsect_addr);
- outb(tf->hob_lbal, ioaddr->lbal_addr);
- outb(tf->hob_lbam, ioaddr->lbam_addr);
- outb(tf->hob_lbah, ioaddr->lbah_addr);
- VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
- tf->hob_feature,
- tf->hob_nsect,
- tf->hob_lbal,
- tf->hob_lbam,
- tf->hob_lbah);
- }
-
- if (is_addr) {
- outb(tf->feature, ioaddr->feature_addr);
- outb(tf->nsect, ioaddr->nsect_addr);
- outb(tf->lbal, ioaddr->lbal_addr);
- outb(tf->lbam, ioaddr->lbam_addr);
- outb(tf->lbah, ioaddr->lbah_addr);
- VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
- tf->feature,
- tf->nsect,
- tf->lbal,
- tf->lbam,
- tf->lbah);
- }
-
- if (tf->flags & ATA_TFLAG_DEVICE) {
- outb(tf->device, ioaddr->device_addr);
- VPRINTK("device 0x%X\n", tf->device);
- }
-
- ata_wait_idle(ap);
-}
-
-/**
- * ata_tf_load_mmio - send taskfile registers to host controller
- * @ap: Port to which output is sent
- * @tf: ATA taskfile register set
- *
- * Outputs ATA taskfile to standard ATA host controller using MMIO.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
- if (tf->ctl != ap->last_ctl) {
- writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
- ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
- }
-
- if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr);
- writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr);
- writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr);
- writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr);
- writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr);
- VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
- tf->hob_feature,
- tf->hob_nsect,
- tf->hob_lbal,
- tf->hob_lbam,
- tf->hob_lbah);
- }
-
- if (is_addr) {
- writeb(tf->feature, (void __iomem *) ioaddr->feature_addr);
- writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
- writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
- writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
- writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
- VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
- tf->feature,
- tf->nsect,
- tf->lbal,
- tf->lbam,
- tf->lbah);
- }
-
- if (tf->flags & ATA_TFLAG_DEVICE) {
- writeb(tf->device, (void __iomem *) ioaddr->device_addr);
- VPRINTK("device 0x%X\n", tf->device);
- }
-
- ata_wait_idle(ap);
-}
-
-
-/**
- * ata_tf_load - send taskfile registers to host controller
- * @ap: Port to which output is sent
- * @tf: ATA taskfile register set
- *
- * Outputs ATA taskfile to standard ATA host controller using MMIO
- * or PIO as indicated by the ATA_FLAG_MMIO flag.
- * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
- * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
- * hob_lbal, hob_lbam, and hob_lbah.
- *
- * This function waits for idle (!BUSY and !DRQ) after writing
- * registers. If the control register has a new value, this
- * function also waits for idle after writing control and before
- * writing the remaining registers.
- *
- * May be used as the tf_load() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
-{
- if (ap->flags & ATA_FLAG_MMIO)
- ata_tf_load_mmio(ap, tf);
- else
- ata_tf_load_pio(ap, tf);
-}
-
-/**
- * ata_exec_command_pio - issue ATA command to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues PIO write to ATA command register, with proper
- * synchronization with interrupt handler / other threads.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf)
-{
- DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
-
- outb(tf->command, ap->ioaddr.command_addr);
- ata_pause(ap);
-}
-
-
-/**
- * ata_exec_command_mmio - issue ATA command to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues MMIO write to ATA command register, with proper
- * synchronization with interrupt handler / other threads.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
-{
- DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
-
- writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr);
- ata_pause(ap);
-}
-
-
-/**
- * ata_exec_command - issue ATA command to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues PIO/MMIO write to ATA command register, with proper
- * synchronization with interrupt handler / other threads.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
-{
- if (ap->flags & ATA_FLAG_MMIO)
- ata_exec_command_mmio(ap, tf);
- else
- ata_exec_command_pio(ap, tf);
-}
-
-/**
- * ata_tf_to_host - issue ATA taskfile to host controller
- * @ap: port to which command is being issued
- * @tf: ATA taskfile register set
- *
- * Issues ATA taskfile register set to ATA host controller,
- * with proper synchronization with interrupt handler and
- * other threads.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-static inline void ata_tf_to_host(struct ata_port *ap,
- const struct ata_taskfile *tf)
-{
- ap->ops->tf_load(ap, tf);
- ap->ops->exec_command(ap, tf);
-}
-
-/**
- * ata_tf_read_pio - input device's ATA taskfile shadow registers
- * @ap: Port from which input is read
- * @tf: ATA taskfile register set for storing input
- *
- * Reads ATA taskfile registers for currently-selected device
- * into @tf.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
- tf->command = ata_check_status(ap);
- tf->feature = inb(ioaddr->error_addr);
- tf->nsect = inb(ioaddr->nsect_addr);
- tf->lbal = inb(ioaddr->lbal_addr);
- tf->lbam = inb(ioaddr->lbam_addr);
- tf->lbah = inb(ioaddr->lbah_addr);
- tf->device = inb(ioaddr->device_addr);
-
- if (tf->flags & ATA_TFLAG_LBA48) {
- outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
- tf->hob_feature = inb(ioaddr->error_addr);
- tf->hob_nsect = inb(ioaddr->nsect_addr);
- tf->hob_lbal = inb(ioaddr->lbal_addr);
- tf->hob_lbam = inb(ioaddr->lbam_addr);
- tf->hob_lbah = inb(ioaddr->lbah_addr);
- }
-}
-
-/**
- * ata_tf_read_mmio - input device's ATA taskfile shadow registers
- * @ap: Port from which input is read
- * @tf: ATA taskfile register set for storing input
- *
- * Reads ATA taskfile registers for currently-selected device
- * into @tf via MMIO.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
- tf->command = ata_check_status(ap);
- tf->feature = readb((void __iomem *)ioaddr->error_addr);
- tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
- tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
- tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
- tf->lbah = readb((void __iomem *)ioaddr->lbah_addr);
- tf->device = readb((void __iomem *)ioaddr->device_addr);
-
- if (tf->flags & ATA_TFLAG_LBA48) {
- writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr);
- tf->hob_feature = readb((void __iomem *)ioaddr->error_addr);
- tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr);
- tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr);
- tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr);
- tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr);
- }
-}
-
-
-/**
- * ata_tf_read - input device's ATA taskfile shadow registers
- * @ap: Port from which input is read
- * @tf: ATA taskfile register set for storing input
- *
- * Reads ATA taskfile registers for currently-selected device
- * into @tf.
- *
- * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48
- * is set, also reads the hob registers.
- *
- * May be used as the tf_read() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
- if (ap->flags & ATA_FLAG_MMIO)
- ata_tf_read_mmio(ap, tf);
- else
- ata_tf_read_pio(ap, tf);
-}
-
-/**
- * ata_check_status_pio - Read device status reg & clear interrupt
- * @ap: port where the device is
- *
- * Reads ATA taskfile status register for currently-selected device
- * and return its value. This also clears pending interrupts
- * from this device
- *
- * LOCKING:
- * Inherited from caller.
- */
-static u8 ata_check_status_pio(struct ata_port *ap)
-{
- return inb(ap->ioaddr.status_addr);
-}
-
-/**
- * ata_check_status_mmio - Read device status reg & clear interrupt
- * @ap: port where the device is
- *
- * Reads ATA taskfile status register for currently-selected device
- * via MMIO and return its value. This also clears pending interrupts
- * from this device
- *
- * LOCKING:
- * Inherited from caller.
- */
-static u8 ata_check_status_mmio(struct ata_port *ap)
-{
- return readb((void __iomem *) ap->ioaddr.status_addr);
-}
-
-
-/**
- * ata_check_status - Read device status reg & clear interrupt
- * @ap: port where the device is
- *
- * Reads ATA taskfile status register for currently-selected device
- * and return its value. This also clears pending interrupts
- * from this device
- *
- * May be used as the check_status() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-u8 ata_check_status(struct ata_port *ap)
-{
- if (ap->flags & ATA_FLAG_MMIO)
- return ata_check_status_mmio(ap);
- return ata_check_status_pio(ap);
-}
-
-
-/**
- * ata_altstatus - Read device alternate status reg
- * @ap: port where the device is
- *
- * Reads ATA taskfile alternate status register for
- * currently-selected device and return its value.
- *
- * Note: may NOT be used as the check_altstatus() entry in
- * ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-u8 ata_altstatus(struct ata_port *ap)
-{
- if (ap->ops->check_altstatus)
- return ap->ops->check_altstatus(ap);
-
- if (ap->flags & ATA_FLAG_MMIO)
- return readb((void __iomem *)ap->ioaddr.altstatus_addr);
- return inb(ap->ioaddr.altstatus_addr);
-}
-
/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
@@ -834,6 +434,7 @@
* ata_dev_try_classify - Parse returned ATA device signature
* @ap: ATA channel to examine
* @device: Device to examine (starting at zero)
+ * @r_err: Value of error register on completion
*
* After an event -- SRST, E.D.D., or SATA COMRESET -- occurs,
* an ATA/ATAPI-defined set of values is placed in the ATA
@@ -846,11 +447,14 @@
*
* LOCKING:
* caller.
+ *
+ * RETURNS:
+ * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE.
*/
-static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device)
+static unsigned int
+ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err)
{
- struct ata_device *dev = &ap->device[device];
struct ata_taskfile tf;
unsigned int class;
u8 err;
@@ -861,8 +465,8 @@
ap->ops->tf_read(ap, &tf);
err = tf.feature;
-
- dev->class = ATA_DEV_NONE;
+ if (r_err)
+ *r_err = err;
/* see if device passed diags */
if (err == 1)
@@ -870,22 +474,20 @@
else if ((device == 0) && (err == 0x81))
/* do nothing */ ;
else
- return err;
+ return ATA_DEV_NONE;
- /* determine if device if ATA or ATAPI */
+ /* determine if device is ATA or ATAPI */
class = ata_dev_classify(&tf);
+
if (class == ATA_DEV_UNKNOWN)
- return err;
+ return ATA_DEV_NONE;
if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0))
- return err;
-
- dev->class = class;
-
- return err;
+ return ATA_DEV_NONE;
+ return class;
}
/**
- * ata_dev_id_string - Convert IDENTIFY DEVICE page into string
+ * ata_id_string - Convert IDENTIFY DEVICE page into string
* @id: IDENTIFY DEVICE results we will examine
* @s: string into which data is output
* @ofs: offset into identify device page
@@ -899,8 +501,8 @@
* caller.
*/
-void ata_dev_id_string(const u16 *id, unsigned char *s,
- unsigned int ofs, unsigned int len)
+void ata_id_string(const u16 *id, unsigned char *s,
+ unsigned int ofs, unsigned int len)
{
unsigned int c;
@@ -918,6 +520,49 @@
}
}
+/**
+ * ata_id_c_string - Convert IDENTIFY DEVICE page into C string
+ * @id: IDENTIFY DEVICE results we will examine
+ * @s: string into which data is output
+ * @ofs: offset into identify device page
+ * @len: length of string to return. must be an odd number.
+ *
+ * This function is identical to ata_id_string except that it
+ * trims trailing spaces and terminates the resulting string with
+ * null. @len must be actual maximum length (even number) + 1.
+ *
+ * LOCKING:
+ * caller.
+ */
+void ata_id_c_string(const u16 *id, unsigned char *s,
+ unsigned int ofs, unsigned int len)
+{
+ unsigned char *p;
+
+ WARN_ON(!(len & 1));
+
+ ata_id_string(id, s, ofs, len - 1);
+
+ p = s + strnlen(s, len - 1);
+ while (p > s && p[-1] == ' ')
+ p--;
+ *p = '\0';
+}
+
+static u64 ata_id_n_sectors(const u16 *id)
+{
+ if (ata_id_has_lba(id)) {
+ if (ata_id_has_lba48(id))
+ return ata_id_u64(id, 100);
+ else
+ return ata_id_u32(id, 60);
+ } else {
+ if (ata_id_current_chs_valid(id))
+ return ata_id_u32(id, 57);
+ else
+ return id[1] * id[3] * id[6];
+ }
+}
/**
* ata_noop_dev_select - Select device 0/1 on ATA bus
@@ -1007,41 +652,41 @@
/**
* ata_dump_id - IDENTIFY DEVICE info debugging output
- * @dev: Device whose IDENTIFY DEVICE page we will dump
+ * @id: IDENTIFY DEVICE page to dump
*
- * Dump selected 16-bit words from a detected device's
- * IDENTIFY PAGE page.
+ * Dump selected 16-bit words from the given IDENTIFY DEVICE
+ * page.
*
* LOCKING:
* caller.
*/
-static inline void ata_dump_id(const struct ata_device *dev)
+static inline void ata_dump_id(const u16 *id)
{
DPRINTK("49==0x%04x "
"53==0x%04x "
"63==0x%04x "
"64==0x%04x "
"75==0x%04x \n",
- dev->id[49],
- dev->id[53],
- dev->id[63],
- dev->id[64],
- dev->id[75]);
+ id[49],
+ id[53],
+ id[63],
+ id[64],
+ id[75]);
DPRINTK("80==0x%04x "
"81==0x%04x "
"82==0x%04x "
"83==0x%04x "
"84==0x%04x \n",
- dev->id[80],
- dev->id[81],
- dev->id[82],
- dev->id[83],
- dev->id[84]);
+ id[80],
+ id[81],
+ id[82],
+ id[83],
+ id[84]);
DPRINTK("88==0x%04x "
"93==0x%04x\n",
- dev->id[88],
- dev->id[93]);
+ id[88],
+ id[93]);
}
/*
@@ -1073,24 +718,77 @@
timing API will get this right anyway */
}
-struct ata_exec_internal_arg {
- unsigned int err_mask;
- struct ata_taskfile *tf;
- struct completion *waiting;
-};
-
-int ata_qc_complete_internal(struct ata_queued_cmd *qc)
+static inline void
+ata_queue_packet_task(struct ata_port *ap)
{
- struct ata_exec_internal_arg *arg = qc->private_data;
- struct completion *waiting = arg->waiting;
+ if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK))
+ queue_work(ata_wq, &ap->packet_task);
+}
- if (!(qc->err_mask & ~AC_ERR_DEV))
- qc->ap->ops->tf_read(qc->ap, arg->tf);
- arg->err_mask = qc->err_mask;
- arg->waiting = NULL;
+static inline void
+ata_queue_pio_task(struct ata_port *ap)
+{
+ if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK))
+ queue_work(ata_wq, &ap->pio_task);
+}
+
+static inline void
+ata_queue_delayed_pio_task(struct ata_port *ap, unsigned long delay)
+{
+ if (!(ap->flags & ATA_FLAG_FLUSH_PIO_TASK))
+ queue_delayed_work(ata_wq, &ap->pio_task, delay);
+}
+
+/**
+ * ata_flush_pio_tasks - Flush pio_task and packet_task
+ * @ap: the target ata_port
+ *
+ * After this function completes, pio_task and packet_task are
+ * guranteed not to be running or scheduled.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+
+static void ata_flush_pio_tasks(struct ata_port *ap)
+{
+ int tmp = 0;
+ unsigned long flags;
+
+ DPRINTK("ENTER\n");
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->flags |= ATA_FLAG_FLUSH_PIO_TASK;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ DPRINTK("flush #1\n");
+ flush_workqueue(ata_wq);
+
+ /*
+ * At this point, if a task is running, it's guaranteed to see
+ * the FLUSH flag; thus, it will never queue pio tasks again.
+ * Cancel and flush.
+ */
+ tmp |= cancel_delayed_work(&ap->pio_task);
+ tmp |= cancel_delayed_work(&ap->packet_task);
+ if (!tmp) {
+ DPRINTK("flush #2\n");
+ flush_workqueue(ata_wq);
+ }
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->flags &= ~ATA_FLAG_FLUSH_PIO_TASK;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ DPRINTK("EXIT\n");
+}
+
+void ata_qc_complete_internal(struct ata_queued_cmd *qc)
+{
+ struct completion *waiting = qc->private_data;
+
+ qc->ap->ops->tf_read(qc->ap, &qc->tf);
complete(waiting);
-
- return 0;
}
/**
@@ -1121,7 +819,7 @@
struct ata_queued_cmd *qc;
DECLARE_COMPLETION(wait);
unsigned long flags;
- struct ata_exec_internal_arg arg;
+ unsigned int err_mask;
spin_lock_irqsave(&ap->host_set->lock, flags);
@@ -1135,13 +833,12 @@
qc->nsect = buflen / ATA_SECT_SIZE;
}
- arg.waiting = &wait;
- arg.tf = tf;
- qc->private_data = &arg;
+ qc->private_data = &wait;
qc->complete_fn = ata_qc_complete_internal;
- if (ata_qc_issue(qc))
- goto issue_fail;
+ qc->err_mask = ata_qc_issue(qc);
+ if (qc->err_mask)
+ ata_qc_complete(qc);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
@@ -1154,8 +851,8 @@
* before the caller cleans up, it will result in a
* spurious interrupt. We can live with that.
*/
- if (arg.waiting) {
- qc->err_mask = AC_ERR_OTHER;
+ if (qc->flags & ATA_QCFLAG_ACTIVE) {
+ qc->err_mask = AC_ERR_TIMEOUT;
ata_qc_complete(qc);
printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n",
ap->id, command);
@@ -1164,12 +861,12 @@
spin_unlock_irqrestore(&ap->host_set->lock, flags);
}
- return arg.err_mask;
+ *tf = qc->tf;
+ err_mask = qc->err_mask;
- issue_fail:
ata_qc_free(qc);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
- return AC_ERR_OTHER;
+
+ return err_mask;
}
/**
@@ -1231,12 +928,11 @@
{
struct ata_device *dev = &ap->device[device];
unsigned int major_version;
- u16 tmp;
unsigned long xfer_modes;
unsigned int using_edd;
struct ata_taskfile tf;
unsigned int err_mask;
- int rc;
+ int i, rc;
if (!ata_dev_present(dev)) {
DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n",
@@ -1244,15 +940,16 @@
return;
}
- if (ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET))
+ if (ap->ops->probe_reset ||
+ ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET))
using_edd = 0;
else
using_edd = 1;
DPRINTK("ENTER, host %u, dev %u\n", ap->id, device);
- assert (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ATAPI ||
- dev->class == ATA_DEV_NONE);
+ WARN_ON(dev->class != ATA_DEV_ATA && dev->class != ATA_DEV_ATAPI &&
+ dev->class != ATA_DEV_NONE);
ata_dev_select(ap, device, 1, 1); /* select device 0/1 */
@@ -1324,18 +1021,17 @@
if (!xfer_modes)
xfer_modes = ata_pio_modes(dev);
- ata_dump_id(dev);
+ ata_dump_id(dev->id);
/* ATA-specific feature tests */
if (dev->class == ATA_DEV_ATA) {
+ dev->n_sectors = ata_id_n_sectors(dev->id);
+
if (!ata_id_is_ata(dev->id)) /* sanity check */
goto err_out_nosup;
/* get major version */
- tmp = dev->id[ATA_ID_MAJOR_VER];
- for (major_version = 14; major_version >= 1; major_version--)
- if (tmp & (1 << major_version))
- break;
+ major_version = ata_id_major_version(dev->id);
/*
* The exact sequence expected by certain pre-ATA4 drives is:
@@ -1346,7 +1042,12 @@
* Some drives were very specific about that exact sequence.
*/
if (major_version < 4 || (!ata_id_has_lba(dev->id))) {
- ata_dev_init_params(ap, dev);
+ err_mask = ata_dev_init_params(ap, dev);
+ if (err_mask) {
+ printk(KERN_ERR "ata%u: failed to init "
+ "parameters, disabled\n", ap->id);
+ goto err_out;
+ }
/* current CHS translation info (id[53-58]) might be
* changed. reread the identify device info.
@@ -1357,12 +1058,8 @@
if (ata_id_has_lba(dev->id)) {
dev->flags |= ATA_DFLAG_LBA;
- if (ata_id_has_lba48(dev->id)) {
+ if (ata_id_has_lba48(dev->id))
dev->flags |= ATA_DFLAG_LBA48;
- dev->n_sectors = ata_id_u64(dev->id, 100);
- } else {
- dev->n_sectors = ata_id_u32(dev->id, 60);
- }
/* print device info to dmesg */
printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n",
@@ -1378,15 +1075,12 @@
dev->cylinders = dev->id[1];
dev->heads = dev->id[3];
dev->sectors = dev->id[6];
- dev->n_sectors = dev->cylinders * dev->heads * dev->sectors;
if (ata_id_current_chs_valid(dev->id)) {
/* Current CHS translation is valid. */
dev->cylinders = dev->id[54];
dev->heads = dev->id[55];
dev->sectors = dev->id[56];
-
- dev->n_sectors = ata_id_u32(dev->id, 57);
}
/* print device info to dmesg */
@@ -1399,7 +1093,7 @@
}
- ap->host->max_cmd_len = 16;
+ dev->cdb_len = 16;
}
/* ATAPI-specific feature tests */
@@ -1412,8 +1106,7 @@
printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id);
goto err_out_nosup;
}
- ap->cdb_len = (unsigned int) rc;
- ap->host->max_cmd_len = (unsigned char) ap->cdb_len;
+ dev->cdb_len = (unsigned int) rc;
/* print device info to dmesg */
printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n",
@@ -1421,6 +1114,12 @@
ata_mode_string(xfer_modes));
}
+ ap->host->max_cmd_len = 0;
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ ap->host->max_cmd_len = max_t(unsigned int,
+ ap->host->max_cmd_len,
+ ap->device[i].cdb_len);
+
DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap));
return;
@@ -1433,30 +1132,28 @@
}
-static inline u8 ata_dev_knobble(const struct ata_port *ap)
+static inline u8 ata_dev_knobble(const struct ata_port *ap,
+ struct ata_device *dev)
{
- return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id)));
+ return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
}
/**
- * ata_dev_config - Run device specific handlers and check for
- * SATA->PATA bridges
- * @ap: Bus
- * @i: Device
+ * ata_dev_config - Run device specific handlers & check for SATA->PATA bridges
+ * @ap: Bus
+ * @i: Device
*
- * LOCKING:
+ * LOCKING:
*/
void ata_dev_config(struct ata_port *ap, unsigned int i)
{
/* limit bridge transfers to udma5, 200 sectors */
- if (ata_dev_knobble(ap)) {
+ if (ata_dev_knobble(ap, &ap->device[i])) {
printk(KERN_INFO "ata%u(%u): applying bridge limits\n",
- ap->id, ap->device->devno);
+ ap->id, i);
ap->udma_mask &= ATA_UDMA5;
- ap->host->max_sectors = ATA_MAX_SECTORS;
- ap->host->hostt->max_sectors = ATA_MAX_SECTORS;
- ap->device[i].flags |= ATA_DFLAG_LOCK_SECTORS;
+ ap->device[i].max_sectors = ATA_MAX_SECTORS;
}
if (ap->ops->dev_config)
@@ -1482,7 +1179,27 @@
{
unsigned int i, found = 0;
- ap->ops->phy_reset(ap);
+ if (ap->ops->probe_reset) {
+ unsigned int classes[ATA_MAX_DEVICES];
+ int rc;
+
+ ata_port_probe(ap);
+
+ rc = ap->ops->probe_reset(ap, classes);
+ if (rc == 0) {
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ if (classes[i] == ATA_DEV_UNKNOWN)
+ classes[i] = ATA_DEV_NONE;
+ ap->device[i].class = classes[i];
+ }
+ } else {
+ printk(KERN_ERR "ata%u: probe reset failed, "
+ "disabling port\n", ap->id);
+ ata_port_disable(ap);
+ }
+ } else
+ ap->ops->phy_reset(ap);
+
if (ap->flags & ATA_FLAG_PORT_DISABLED)
goto err_out;
@@ -1526,6 +1243,41 @@
}
/**
+ * sata_print_link_status - Print SATA link status
+ * @ap: SATA port to printk link status about
+ *
+ * This function prints link speed and status of a SATA link.
+ *
+ * LOCKING:
+ * None.
+ */
+static void sata_print_link_status(struct ata_port *ap)
+{
+ u32 sstatus, tmp;
+ const char *speed;
+
+ if (!ap->ops->scr_read)
+ return;
+
+ sstatus = scr_read(ap, SCR_STATUS);
+
+ if (sata_dev_present(ap)) {
+ tmp = (sstatus >> 4) & 0xf;
+ if (tmp & (1 << 0))
+ speed = "1.5";
+ else if (tmp & (1 << 1))
+ speed = "3.0";
+ else
+ speed = "<unknown>";
+ printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n",
+ ap->id, speed, sstatus);
+ } else {
+ printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n",
+ ap->id, sstatus);
+ }
+}
+
+/**
* __sata_phy_reset - Wake/reset a low-level SATA PHY
* @ap: SATA port associated with target SATA PHY.
*
@@ -1559,27 +1311,14 @@
break;
} while (time_before(jiffies, timeout));
- /* TODO: phy layer with polling, timeouts, etc. */
- sstatus = scr_read(ap, SCR_STATUS);
- if (sata_dev_present(ap)) {
- const char *speed;
- u32 tmp;
+ /* print link status */
+ sata_print_link_status(ap);
- tmp = (sstatus >> 4) & 0xf;
- if (tmp & (1 << 0))
- speed = "1.5";
- else if (tmp & (1 << 1))
- speed = "3.0";
- else
- speed = "<unknown>";
- printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n",
- ap->id, speed, sstatus);
+ /* TODO: phy layer with polling, timeouts, etc. */
+ if (sata_dev_present(ap))
ata_port_probe(ap);
- } else {
- printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n",
- ap->id, sstatus);
+ else
ata_port_disable(ap);
- }
if (ap->flags & ATA_FLAG_PORT_DISABLED)
return;
@@ -1752,9 +1491,9 @@
ata_timing_quantize(t, t, T, UT);
/*
- * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T
- * and some other commands. We have to ensure that the DMA cycle timing is
- * slower/equal than the fastest PIO timing.
+ * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
+ * S.M.A.R.T * and some other commands. We have to ensure that the
+ * DMA cycle timing is slower/equal than the fastest PIO timing.
*/
if (speed > XFER_PIO_4) {
@@ -1763,7 +1502,7 @@
}
/*
- * Lenghten active & recovery time so that cycle time is correct.
+ * Lengthen active & recovery time so that cycle time is correct.
*/
if (t->act8b + t->rec8b < t->cyc8b) {
@@ -1882,7 +1621,6 @@
*
* LOCKING:
* PCI/etc. bus probe sem.
- *
*/
static void ata_set_mode(struct ata_port *ap)
{
@@ -1922,6 +1660,26 @@
}
/**
+ * ata_tf_to_host - issue ATA taskfile to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues ATA taskfile register set to ATA host controller,
+ * with proper synchronization with interrupt handler and
+ * other threads.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+static inline void ata_tf_to_host(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ ap->ops->tf_load(ap, tf);
+ ap->ops->exec_command(ap, tf);
+}
+
+/**
* ata_busy_sleep - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
* @tmout_pat: impatience timeout
@@ -1931,12 +1689,10 @@
* or a timeout occurs.
*
* LOCKING: None.
- *
*/
-static unsigned int ata_busy_sleep (struct ata_port *ap,
- unsigned long tmout_pat,
- unsigned long tmout)
+unsigned int ata_busy_sleep (struct ata_port *ap,
+ unsigned long tmout_pat, unsigned long tmout)
{
unsigned long timer_start, timeout;
u8 status;
@@ -2155,9 +1911,9 @@
/*
* determine by signature whether we have ATA or ATAPI devices
*/
- err = ata_dev_try_classify(ap, 0);
+ ap->device[0].class = ata_dev_try_classify(ap, 0, &err);
if ((slave_possible) && (err != 0x81))
- ata_dev_try_classify(ap, 1);
+ ap->device[1].class = ata_dev_try_classify(ap, 1, &err);
/* re-enable interrupts */
if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
@@ -2192,6 +1948,334 @@
DPRINTK("EXIT\n");
}
+static int sata_phy_resume(struct ata_port *ap)
+{
+ unsigned long timeout = jiffies + (HZ * 5);
+ u32 sstatus;
+
+ scr_write_flush(ap, SCR_CONTROL, 0x300);
+
+ /* Wait for phy to become ready, if necessary. */
+ do {
+ msleep(200);
+ sstatus = scr_read(ap, SCR_STATUS);
+ if ((sstatus & 0xf) != 1)
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ return -1;
+}
+
+/**
+ * ata_std_probeinit - initialize probing
+ * @ap: port to be probed
+ *
+ * @ap is about to be probed. Initialize it. This function is
+ * to be used as standard callback for ata_drive_probe_reset().
+ *
+ * NOTE!!! Do not use this function as probeinit if a low level
+ * driver implements only hardreset. Just pass NULL as probeinit
+ * in that case. Using this function is probably okay but doing
+ * so makes reset sequence different from the original
+ * ->phy_reset implementation and Jeff nervous. :-P
+ */
+extern void ata_std_probeinit(struct ata_port *ap)
+{
+ if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) {
+ sata_phy_resume(ap);
+ if (sata_dev_present(ap))
+ ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ }
+}
+
+/**
+ * ata_std_softreset - reset host port via ATA SRST
+ * @ap: port to reset
+ * @verbose: fail verbosely
+ * @classes: resulting classes of attached devices
+ *
+ * Reset host port using ATA SRST. This function is to be used
+ * as standard callback for ata_drive_*_reset() functions.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes)
+{
+ unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+ unsigned int devmask = 0, err_mask;
+ u8 err;
+
+ DPRINTK("ENTER\n");
+
+ if (ap->ops->scr_read && !sata_dev_present(ap)) {
+ classes[0] = ATA_DEV_NONE;
+ goto out;
+ }
+
+ /* determine if device 0/1 are present */
+ if (ata_devchk(ap, 0))
+ devmask |= (1 << 0);
+ if (slave_possible && ata_devchk(ap, 1))
+ devmask |= (1 << 1);
+
+ /* select device 0 again */
+ ap->ops->dev_select(ap, 0);
+
+ /* issue bus reset */
+ DPRINTK("about to softreset, devmask=%x\n", devmask);
+ err_mask = ata_bus_softreset(ap, devmask);
+ if (err_mask) {
+ if (verbose)
+ printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n",
+ ap->id, err_mask);
+ else
+ DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n",
+ err_mask);
+ return -EIO;
+ }
+
+ /* determine by signature whether we have ATA or ATAPI devices */
+ classes[0] = ata_dev_try_classify(ap, 0, &err);
+ if (slave_possible && err != 0x81)
+ classes[1] = ata_dev_try_classify(ap, 1, &err);
+
+ out:
+ DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
+ return 0;
+}
+
+/**
+ * sata_std_hardreset - reset host port via SATA phy reset
+ * @ap: port to reset
+ * @verbose: fail verbosely
+ * @class: resulting class of attached device
+ *
+ * SATA phy-reset host port using DET bits of SControl register.
+ * This function is to be used as standard callback for
+ * ata_drive_*_reset().
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class)
+{
+ DPRINTK("ENTER\n");
+
+ /* Issue phy wake/reset */
+ scr_write_flush(ap, SCR_CONTROL, 0x301);
+
+ /*
+ * Couldn't find anything in SATA I/II specs, but AHCI-1.1
+ * 10.4.2 says at least 1 ms.
+ */
+ msleep(1);
+
+ /* Bring phy back */
+ sata_phy_resume(ap);
+
+ /* TODO: phy layer with polling, timeouts, etc. */
+ if (!sata_dev_present(ap)) {
+ *class = ATA_DEV_NONE;
+ DPRINTK("EXIT, link offline\n");
+ return 0;
+ }
+
+ if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
+ if (verbose)
+ printk(KERN_ERR "ata%u: COMRESET failed "
+ "(device not ready)\n", ap->id);
+ else
+ DPRINTK("EXIT, device not ready\n");
+ return -EIO;
+ }
+
+ ap->ops->dev_select(ap, 0); /* probably unnecessary */
+
+ *class = ata_dev_try_classify(ap, 0, NULL);
+
+ DPRINTK("EXIT, class=%u\n", *class);
+ return 0;
+}
+
+/**
+ * ata_std_postreset - standard postreset callback
+ * @ap: the target ata_port
+ * @classes: classes of attached devices
+ *
+ * This function is invoked after a successful reset. Note that
+ * the device might have been reset more than once using
+ * different reset methods before postreset is invoked.
+ *
+ * This function is to be used as standard callback for
+ * ata_drive_*_reset().
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_std_postreset(struct ata_port *ap, unsigned int *classes)
+{
+ DPRINTK("ENTER\n");
+
+ /* set cable type if it isn't already set */
+ if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA)
+ ap->cbl = ATA_CBL_SATA;
+
+ /* print link status */
+ if (ap->cbl == ATA_CBL_SATA)
+ sata_print_link_status(ap);
+
+ /* re-enable interrupts */
+ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
+ ata_irq_on(ap);
+
+ /* is double-select really necessary? */
+ if (classes[0] != ATA_DEV_NONE)
+ ap->ops->dev_select(ap, 1);
+ if (classes[1] != ATA_DEV_NONE)
+ ap->ops->dev_select(ap, 0);
+
+ /* bail out if no device is present */
+ if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+ DPRINTK("EXIT, no device\n");
+ return;
+ }
+
+ /* set up device control */
+ if (ap->ioaddr.ctl_addr) {
+ if (ap->flags & ATA_FLAG_MMIO)
+ writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
+ else
+ outb(ap->ctl, ap->ioaddr.ctl_addr);
+ }
+
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * ata_std_probe_reset - standard probe reset method
+ * @ap: prot to perform probe-reset
+ * @classes: resulting classes of attached devices
+ *
+ * The stock off-the-shelf ->probe_reset method.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise.
+ */
+int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes)
+{
+ ata_reset_fn_t hardreset;
+
+ hardreset = NULL;
+ if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read)
+ hardreset = sata_std_hardreset;
+
+ return ata_drive_probe_reset(ap, ata_std_probeinit,
+ ata_std_softreset, hardreset,
+ ata_std_postreset, classes);
+}
+
+static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset,
+ ata_postreset_fn_t postreset,
+ unsigned int *classes)
+{
+ int i, rc;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ classes[i] = ATA_DEV_UNKNOWN;
+
+ rc = reset(ap, 0, classes);
+ if (rc)
+ return rc;
+
+ /* If any class isn't ATA_DEV_UNKNOWN, consider classification
+ * is complete and convert all ATA_DEV_UNKNOWN to
+ * ATA_DEV_NONE.
+ */
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ if (classes[i] != ATA_DEV_UNKNOWN)
+ break;
+
+ if (i < ATA_MAX_DEVICES)
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ if (classes[i] == ATA_DEV_UNKNOWN)
+ classes[i] = ATA_DEV_NONE;
+
+ if (postreset)
+ postreset(ap, classes);
+
+ return classes[0] != ATA_DEV_UNKNOWN ? 0 : -ENODEV;
+}
+
+/**
+ * ata_drive_probe_reset - Perform probe reset with given methods
+ * @ap: port to reset
+ * @probeinit: probeinit method (can be NULL)
+ * @softreset: softreset method (can be NULL)
+ * @hardreset: hardreset method (can be NULL)
+ * @postreset: postreset method (can be NULL)
+ * @classes: resulting classes of attached devices
+ *
+ * Reset the specified port and classify attached devices using
+ * given methods. This function prefers softreset but tries all
+ * possible reset sequences to reset and classify devices. This
+ * function is intended to be used for constructing ->probe_reset
+ * callback by low level drivers.
+ *
+ * Reset methods should follow the following rules.
+ *
+ * - Return 0 on sucess, -errno on failure.
+ * - If classification is supported, fill classes[] with
+ * recognized class codes.
+ * - If classification is not supported, leave classes[] alone.
+ * - If verbose is non-zero, print error message on failure;
+ * otherwise, shut up.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV
+ * if classification fails, and any error code from reset
+ * methods.
+ */
+int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
+ ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
+ ata_postreset_fn_t postreset, unsigned int *classes)
+{
+ int rc = -EINVAL;
+
+ if (probeinit)
+ probeinit(ap);
+
+ if (softreset) {
+ rc = do_probe_reset(ap, softreset, postreset, classes);
+ if (rc == 0)
+ return 0;
+ }
+
+ if (!hardreset)
+ return rc;
+
+ rc = do_probe_reset(ap, hardreset, postreset, classes);
+ if (rc == 0 || rc != -ENODEV)
+ return rc;
+
+ if (softreset)
+ rc = do_probe_reset(ap, softreset, postreset, classes);
+
+ return rc;
+}
+
static void ata_pr_blacklisted(const struct ata_port *ap,
const struct ata_device *dev)
{
@@ -2233,24 +2317,13 @@
static int ata_dma_blacklisted(const struct ata_device *dev)
{
- unsigned char model_num[40];
- char *s;
- unsigned int len;
+ unsigned char model_num[41];
int i;
- ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
- sizeof(model_num));
- s = &model_num[0];
- len = strnlen(s, sizeof(model_num));
-
- /* ATAPI specifies that empty space is blank-filled; remove blanks */
- while ((len > 0) && (s[len - 1] == ' ')) {
- len--;
- s[len] = 0;
- }
+ ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num));
for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++)
- if (!strncmp(ata_dma_blacklist[i], s, len))
+ if (!strcmp(ata_dma_blacklist[i], model_num))
return 1;
return 0;
@@ -2264,7 +2337,7 @@
master = &ap->device[0];
slave = &ap->device[1];
- assert (ata_dev_present(master) || ata_dev_present(slave));
+ WARN_ON(!ata_dev_present(master) && !ata_dev_present(slave));
if (shift == ATA_SHIFT_UDMA) {
mask = ap->udma_mask;
@@ -2446,7 +2519,7 @@
swap_buf_le16(dev->id, ATA_ID_WORDS);
- ata_dump_id(dev);
+ ata_dump_id(dev->id);
DPRINTK("EXIT\n");
@@ -2462,17 +2535,23 @@
* @dev: Device to which command will be sent
*
* LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * 0 on success, AC_ERR_* mask otherwise.
*/
-static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev)
+static unsigned int ata_dev_init_params(struct ata_port *ap,
+ struct ata_device *dev)
{
struct ata_taskfile tf;
+ unsigned int err_mask;
u16 sectors = dev->id[6];
u16 heads = dev->id[3];
/* Number of sectors per track 1-255. Number of heads 1-16 */
if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
- return;
+ return 0;
/* set up init dev params taskfile */
DPRINTK("init dev params \n");
@@ -2484,13 +2563,10 @@
tf.nsect = sectors;
tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
- if (ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0)) {
- printk(KERN_ERR "ata%u: failed to init parameters, disabled\n",
- ap->id);
- ata_port_disable(ap);
- }
+ err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0);
- DPRINTK("EXIT\n");
+ DPRINTK("EXIT, err_mask=%x\n", err_mask);
+ return err_mask;
}
/**
@@ -2510,11 +2586,11 @@
int dir = qc->dma_dir;
void *pad_buf = NULL;
- assert(qc->flags & ATA_QCFLAG_DMAMAP);
- assert(sg != NULL);
+ WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
+ WARN_ON(sg == NULL);
if (qc->flags & ATA_QCFLAG_SINGLE)
- assert(qc->n_elem <= 1);
+ WARN_ON(qc->n_elem > 1);
VPRINTK("unmapping %u sg elements\n", qc->n_elem);
@@ -2569,8 +2645,8 @@
struct scatterlist *sg;
unsigned int idx;
- assert(qc->__sg != NULL);
- assert(qc->n_elem > 0 || qc->pad_len > 0);
+ WARN_ON(qc->__sg == NULL);
+ WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
idx = 0;
ata_for_each_sg(sg, qc) {
@@ -2723,7 +2799,7 @@
void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ);
struct scatterlist *psg = &qc->pad_sgent;
- assert(qc->dev->class == ATA_DEV_ATAPI);
+ WARN_ON(qc->dev->class != ATA_DEV_ATAPI);
memset(pad_buf, 0, ATA_DMA_PAD_SZ);
@@ -2787,7 +2863,7 @@
int n_elem, pre_n_elem, dir, trim_sg = 0;
VPRINTK("ENTER, ata%u\n", ap->id);
- assert(qc->flags & ATA_QCFLAG_SG);
+ WARN_ON(!(qc->flags & ATA_QCFLAG_SG));
/* we must lengthen transfers to end on a 32-bit boundary */
qc->pad_len = lsg->length & 3;
@@ -2796,7 +2872,7 @@
struct scatterlist *psg = &qc->pad_sgent;
unsigned int offset;
- assert(qc->dev->class == ATA_DEV_ATAPI);
+ WARN_ON(qc->dev->class != ATA_DEV_ATAPI);
memset(pad_buf, 0, ATA_DMA_PAD_SZ);
@@ -2872,7 +2948,7 @@
}
/**
- * ata_pio_poll -
+ * ata_pio_poll - poll using PIO, depending on current state
* @ap: the target ata_port
*
* LOCKING:
@@ -2890,7 +2966,7 @@
unsigned int reg_state = HSM_ST_UNKNOWN;
qc = ata_qc_from_tag(ap, ap->active_tag);
- assert(qc != NULL);
+ WARN_ON(qc == NULL);
switch (ap->hsm_task_state) {
case HSM_ST:
@@ -2911,7 +2987,7 @@
status = ata_chk_status(ap);
if (status & ATA_BUSY) {
if (time_after(jiffies, ap->pio_task_timeout)) {
- qc->err_mask |= AC_ERR_ATA_BUS;
+ qc->err_mask |= AC_ERR_TIMEOUT;
ap->hsm_task_state = HSM_ST_TMOUT;
return 0;
}
@@ -2958,7 +3034,7 @@
}
qc = ata_qc_from_tag(ap, ap->active_tag);
- assert(qc != NULL);
+ WARN_ON(qc == NULL);
drv_stat = ata_wait_idle(ap);
if (!ata_ok(drv_stat)) {
@@ -2969,7 +3045,7 @@
ap->hsm_task_state = HSM_ST_IDLE;
- assert(qc->err_mask == 0);
+ WARN_ON(qc->err_mask);
ata_poll_qc_complete(qc);
/* another command may start at this point */
@@ -2979,7 +3055,7 @@
/**
- * swap_buf_le16 - swap halves of 16-words in place
+ * swap_buf_le16 - swap halves of 16-bit words in place
* @buf: Buffer to swap
* @buf_words: Number of 16-bit words in buffer.
*
@@ -3289,7 +3365,7 @@
err_out:
printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n",
ap->id, dev->devno);
- qc->err_mask |= AC_ERR_ATA_BUS;
+ qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
}
@@ -3326,7 +3402,7 @@
}
qc = ata_qc_from_tag(ap, ap->active_tag);
- assert(qc != NULL);
+ WARN_ON(qc == NULL);
/* check error */
if (status & (ATA_ERR | ATA_DF)) {
@@ -3347,7 +3423,7 @@
} else {
/* handle BSY=0, DRQ=0 as error */
if ((status & ATA_DRQ) == 0) {
- qc->err_mask |= AC_ERR_ATA_BUS;
+ qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
return;
}
@@ -3361,7 +3437,7 @@
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- assert(qc != NULL);
+ WARN_ON(qc == NULL);
if (qc->tf.command != ATA_CMD_PACKET)
printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
@@ -3369,7 +3445,7 @@
/* make sure qc->err_mask is available to
* know what's wrong and recover
*/
- assert(qc->err_mask);
+ WARN_ON(qc->err_mask == 0);
ap->hsm_task_state = HSM_ST_IDLE;
@@ -3410,7 +3486,7 @@
}
if (timeout)
- queue_delayed_work(ata_wq, &ap->pio_task, timeout);
+ ata_queue_delayed_pio_task(ap, timeout);
else if (!qc_completed)
goto fsm_start;
}
@@ -3443,15 +3519,10 @@
DPRINTK("ENTER\n");
- spin_lock_irqsave(&host_set->lock, flags);
+ ata_flush_pio_tasks(ap);
+ ap->hsm_task_state = HSM_ST_IDLE;
- /* hack alert! We cannot use the supplied completion
- * function from inside the ->eh_strategy_handler() thread.
- * libata is the only user of ->eh_strategy_handler() in
- * any kernel, so the default scsi_done() assumes it is
- * not being called from the SCSI EH.
- */
- qc->scsidone = scsi_finish_command;
+ spin_lock_irqsave(&host_set->lock, flags);
switch (qc->tf.protocol) {
@@ -3476,12 +3547,13 @@
/* complete taskfile transaction */
qc->err_mask |= ac_err_mask(drv_stat);
- ata_qc_complete(qc);
break;
}
spin_unlock_irqrestore(&host_set->lock, flags);
+ ata_eh_qc_complete(qc);
+
DPRINTK("EXIT\n");
}
@@ -3506,20 +3578,10 @@
void ata_eng_timeout(struct ata_port *ap)
{
- struct ata_queued_cmd *qc;
-
DPRINTK("ENTER\n");
- qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc)
- ata_qc_timeout(qc);
- else {
- printk(KERN_ERR "ata%u: BUG: timeout without command\n",
- ap->id);
- goto out;
- }
+ ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag));
-out:
DPRINTK("EXIT\n");
}
@@ -3575,21 +3637,6 @@
return qc;
}
-static void __ata_qc_complete(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- unsigned int tag;
-
- qc->flags = 0;
- tag = qc->tag;
- if (likely(ata_tag_valid(tag))) {
- if (tag == ap->active_tag)
- ap->active_tag = ATA_TAG_POISON;
- qc->tag = ATA_TAG_POISON;
- clear_bit(tag, &ap->qactive);
- }
-}
-
/**
* ata_qc_free - free unused ata_queued_cmd
* @qc: Command to complete
@@ -3602,29 +3649,25 @@
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
- assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */
+ struct ata_port *ap = qc->ap;
+ unsigned int tag;
- __ata_qc_complete(qc);
+ WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+
+ qc->flags = 0;
+ tag = qc->tag;
+ if (likely(ata_tag_valid(tag))) {
+ if (tag == ap->active_tag)
+ ap->active_tag = ATA_TAG_POISON;
+ qc->tag = ATA_TAG_POISON;
+ clear_bit(tag, &ap->qactive);
+ }
}
-/**
- * ata_qc_complete - Complete an active ATA command
- * @qc: Command to complete
- * @err_mask: ATA Status register contents
- *
- * Indicate to the mid and upper layers that an ATA
- * command has completed, with either an ok or not-ok status.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-
-void ata_qc_complete(struct ata_queued_cmd *qc)
+void __ata_qc_complete(struct ata_queued_cmd *qc)
{
- int rc;
-
- assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */
- assert(qc->flags & ATA_QCFLAG_ACTIVE);
+ WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+ WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
ata_sg_clean(qc);
@@ -3636,17 +3679,7 @@
qc->flags &= ~ATA_QCFLAG_ACTIVE;
/* call completion callback */
- rc = qc->complete_fn(qc);
-
- /* if callback indicates not to complete command (non-zero),
- * return immediately
- */
- if (rc != 0)
- return;
-
- __ata_qc_complete(qc);
-
- VPRINTK("EXIT\n");
+ qc->complete_fn(qc);
}
static inline int ata_should_dma_map(struct ata_queued_cmd *qc)
@@ -3686,20 +3719,20 @@
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
- * Zero on success, negative on error.
+ * Zero on success, AC_ERR_* mask on failure
*/
-int ata_qc_issue(struct ata_queued_cmd *qc)
+unsigned int ata_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
if (ata_should_dma_map(qc)) {
if (qc->flags & ATA_QCFLAG_SG) {
if (ata_sg_setup(qc))
- goto err_out;
+ goto sg_err;
} else if (qc->flags & ATA_QCFLAG_SINGLE) {
if (ata_sg_setup_one(qc))
- goto err_out;
+ goto sg_err;
}
} else {
qc->flags &= ~ATA_QCFLAG_DMAMAP;
@@ -3712,8 +3745,9 @@
return ap->ops->qc_issue(qc);
-err_out:
- return -1;
+sg_err:
+ qc->flags &= ~ATA_QCFLAG_DMAMAP;
+ return AC_ERR_SYSTEM;
}
@@ -3732,10 +3766,10 @@
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
- * Zero on success, negative on error.
+ * Zero on success, AC_ERR_* mask on failure
*/
-int ata_qc_issue_prot(struct ata_queued_cmd *qc)
+unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
@@ -3756,31 +3790,31 @@
ata_qc_set_polling(qc);
ata_tf_to_host(ap, &qc->tf);
ap->hsm_task_state = HSM_ST;
- queue_work(ata_wq, &ap->pio_task);
+ ata_queue_pio_task(ap);
break;
case ATA_PROT_ATAPI:
ata_qc_set_polling(qc);
ata_tf_to_host(ap, &qc->tf);
- queue_work(ata_wq, &ap->packet_task);
+ ata_queue_packet_task(ap);
break;
case ATA_PROT_ATAPI_NODATA:
ap->flags |= ATA_FLAG_NOINTR;
ata_tf_to_host(ap, &qc->tf);
- queue_work(ata_wq, &ap->packet_task);
+ ata_queue_packet_task(ap);
break;
case ATA_PROT_ATAPI_DMA:
ap->flags |= ATA_FLAG_NOINTR;
ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
ap->ops->bmdma_setup(qc); /* set up bmdma */
- queue_work(ata_wq, &ap->packet_task);
+ ata_queue_packet_task(ap);
break;
default:
WARN_ON(1);
- return -1;
+ return AC_ERR_SYSTEM;
}
return 0;
@@ -4164,26 +4198,26 @@
u8 status;
qc = ata_qc_from_tag(ap, ap->active_tag);
- assert(qc != NULL);
- assert(qc->flags & ATA_QCFLAG_ACTIVE);
+ WARN_ON(qc == NULL);
+ WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
/* sleep-wait for BSY to clear */
DPRINTK("busy wait\n");
if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) {
- qc->err_mask |= AC_ERR_ATA_BUS;
+ qc->err_mask |= AC_ERR_TIMEOUT;
goto err_out;
}
/* make sure DRQ is set */
status = ata_chk_status(ap);
if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) {
- qc->err_mask |= AC_ERR_ATA_BUS;
+ qc->err_mask |= AC_ERR_HSM;
goto err_out;
}
/* send SCSI cdb */
DPRINTK("send cdb\n");
- assert(ap->cdb_len >= 12);
+ WARN_ON(qc->dev->cdb_len < 12);
if (qc->tf.protocol == ATA_PROT_ATAPI_DMA ||
qc->tf.protocol == ATA_PROT_ATAPI_NODATA) {
@@ -4197,16 +4231,16 @@
*/
spin_lock_irqsave(&ap->host_set->lock, flags);
ap->flags &= ~ATA_FLAG_NOINTR;
- ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
+ ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
ap->ops->bmdma_start(qc); /* initiate bmdma */
spin_unlock_irqrestore(&ap->host_set->lock, flags);
} else {
- ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1);
+ ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
/* PIO commands are handled by polling */
ap->hsm_task_state = HSM_ST;
- queue_work(ata_wq, &ap->pio_task);
+ ata_queue_pio_task(ap);
}
return;
@@ -4216,19 +4250,6 @@
}
-/**
- * ata_port_start - Set port up for dma.
- * @ap: Port to initialize
- *
- * Called just after data structures for each port are
- * initialized. Allocates space for PRD table.
- *
- * May be used as the port_start() entry in ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-
/*
* Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
* without filling any other registers
@@ -4280,6 +4301,8 @@
/**
* ata_device_resume - wakeup a previously suspended devices
+ * @ap: port the device is connected to
+ * @dev: the device to resume
*
* Kick the drive back into action, by sending it an idle immediate
* command and making sure its transfer mode matches between drive
@@ -4302,10 +4325,11 @@
/**
* ata_device_suspend - prepare a device for suspend
+ * @ap: port the device is connected to
+ * @dev: the device to suspend
*
* Flush the cache on the drive, if appropriate, then issue a
* standbynow command.
- *
*/
int ata_device_suspend(struct ata_port *ap, struct ata_device *dev)
{
@@ -4319,6 +4343,19 @@
return 0;
}
+/**
+ * ata_port_start - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@@ -4434,6 +4471,7 @@
INIT_WORK(&ap->packet_task, atapi_packet_task, ap);
INIT_WORK(&ap->pio_task, ata_pio_task, ap);
+ INIT_LIST_HEAD(&ap->eh_done_q);
for (i = 0; i < ATA_MAX_DEVICES; i++)
ap->device[i].devno = i;
@@ -4575,9 +4613,9 @@
ap = host_set->ports[i];
- DPRINTK("ata%u: probe begin\n", ap->id);
+ DPRINTK("ata%u: bus probe begin\n", ap->id);
rc = ata_bus_probe(ap);
- DPRINTK("ata%u: probe end\n", ap->id);
+ DPRINTK("ata%u: bus probe end\n", ap->id);
if (rc) {
/* FIXME: do something useful here?
@@ -4601,7 +4639,7 @@
}
/* probes are done, now scan each port's disk(s) */
- DPRINTK("probe begin\n");
+ DPRINTK("host probe begin\n");
for (i = 0; i < count; i++) {
struct ata_port *ap = host_set->ports[i];
@@ -4723,32 +4761,6 @@
ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
}
-static struct ata_probe_ent *
-ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
-{
- struct ata_probe_ent *probe_ent;
-
- probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
- if (!probe_ent) {
- printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
- kobject_name(&(dev->kobj)));
- return NULL;
- }
-
- INIT_LIST_HEAD(&probe_ent->node);
- probe_ent->dev = dev;
-
- probe_ent->sht = port->sht;
- probe_ent->host_flags = port->host_flags;
- probe_ent->pio_mask = port->pio_mask;
- probe_ent->mwdma_mask = port->mwdma_mask;
- probe_ent->udma_mask = port->udma_mask;
- probe_ent->port_ops = port->port_ops;
-
- return probe_ent;
-}
-
-
#ifdef CONFIG_PCI
@@ -4760,256 +4772,6 @@
}
/**
- * ata_pci_init_native_mode - Initialize native-mode driver
- * @pdev: pci device to be initialized
- * @port: array[2] of pointers to port info structures.
- * @ports: bitmap of ports present
- *
- * Utility function which allocates and initializes an
- * ata_probe_ent structure for a standard dual-port
- * PIO-based IDE controller. The returned ata_probe_ent
- * structure can be passed to ata_device_add(). The returned
- * ata_probe_ent structure should then be freed with kfree().
- *
- * The caller need only pass the address of the primary port, the
- * secondary will be deduced automatically. If the device has non
- * standard secondary port mappings this function can be called twice,
- * once for each interface.
- */
-
-struct ata_probe_ent *
-ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
-{
- struct ata_probe_ent *probe_ent =
- ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
- int p = 0;
-
- if (!probe_ent)
- return NULL;
-
- probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = SA_SHIRQ;
- probe_ent->private_data = port[0]->private_data;
-
- if (ports & ATA_PORT_PRIMARY) {
- probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0);
- probe_ent->port[p].altstatus_addr =
- probe_ent->port[p].ctl_addr =
- pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
- probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
- ata_std_ports(&probe_ent->port[p]);
- p++;
- }
-
- if (ports & ATA_PORT_SECONDARY) {
- probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2);
- probe_ent->port[p].altstatus_addr =
- probe_ent->port[p].ctl_addr =
- pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
- probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8;
- ata_std_ports(&probe_ent->port[p]);
- p++;
- }
-
- probe_ent->n_ports = p;
- return probe_ent;
-}
-
-static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num)
-{
- struct ata_probe_ent *probe_ent;
-
- probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
- if (!probe_ent)
- return NULL;
-
- probe_ent->legacy_mode = 1;
- probe_ent->n_ports = 1;
- probe_ent->hard_port_no = port_num;
- probe_ent->private_data = port->private_data;
-
- switch(port_num)
- {
- case 0:
- probe_ent->irq = 14;
- probe_ent->port[0].cmd_addr = 0x1f0;
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr = 0x3f6;
- break;
- case 1:
- probe_ent->irq = 15;
- probe_ent->port[0].cmd_addr = 0x170;
- probe_ent->port[0].altstatus_addr =
- probe_ent->port[0].ctl_addr = 0x376;
- break;
- }
- probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num;
- ata_std_ports(&probe_ent->port[0]);
- return probe_ent;
-}
-
-/**
- * ata_pci_init_one - Initialize/register PCI IDE host controller
- * @pdev: Controller to be initialized
- * @port_info: Information from low-level host driver
- * @n_ports: Number of ports attached to host controller
- *
- * This is a helper function which can be called from a driver's
- * xxx_init_one() probe function if the hardware uses traditional
- * IDE taskfile registers.
- *
- * This function calls pci_enable_device(), reserves its register
- * regions, sets the dma mask, enables bus master mode, and calls
- * ata_device_add()
- *
- * LOCKING:
- * Inherited from PCI layer (may sleep).
- *
- * RETURNS:
- * Zero on success, negative on errno-based value on error.
- */
-
-int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
- unsigned int n_ports)
-{
- struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL;
- struct ata_port_info *port[2];
- u8 tmp8, mask;
- unsigned int legacy_mode = 0;
- int disable_dev_on_err = 1;
- int rc;
-
- DPRINTK("ENTER\n");
-
- port[0] = port_info[0];
- if (n_ports > 1)
- port[1] = port_info[1];
- else
- port[1] = port[0];
-
- if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0
- && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
- /* TODO: What if one channel is in native mode ... */
- pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
- mask = (1 << 2) | (1 << 0);
- if ((tmp8 & mask) != mask)
- legacy_mode = (1 << 3);
- }
-
- /* FIXME... */
- if ((!legacy_mode) && (n_ports > 2)) {
- printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n");
- n_ports = 2;
- /* For now */
- }
-
- /* FIXME: Really for ATA it isn't safe because the device may be
- multi-purpose and we want to leave it alone if it was already
- enabled. Secondly for shared use as Arjan says we want refcounting
-
- Checking dev->is_enabled is insufficient as this is not set at
- boot for the primary video which is BIOS enabled
- */
-
- rc = pci_enable_device(pdev);
- if (rc)
- return rc;
-
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc) {
- disable_dev_on_err = 0;
- goto err_out;
- }
-
- /* FIXME: Should use platform specific mappers for legacy port ranges */
- if (legacy_mode) {
- if (!request_region(0x1f0, 8, "libata")) {
- struct resource *conflict, res;
- res.start = 0x1f0;
- res.end = 0x1f0 + 8 - 1;
- conflict = ____request_resource(&ioport_resource, &res);
- if (!strcmp(conflict->name, "libata"))
- legacy_mode |= (1 << 0);
- else {
- disable_dev_on_err = 0;
- printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n");
- }
- } else
- legacy_mode |= (1 << 0);
-
- if (!request_region(0x170, 8, "libata")) {
- struct resource *conflict, res;
- res.start = 0x170;
- res.end = 0x170 + 8 - 1;
- conflict = ____request_resource(&ioport_resource, &res);
- if (!strcmp(conflict->name, "libata"))
- legacy_mode |= (1 << 1);
- else {
- disable_dev_on_err = 0;
- printk(KERN_WARNING "ata: 0x170 IDE port busy\n");
- }
- } else
- legacy_mode |= (1 << 1);
- }
-
- /* we have legacy mode, but all ports are unavailable */
- if (legacy_mode == (1 << 3)) {
- rc = -EBUSY;
- goto err_out_regions;
- }
-
- rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out_regions;
- rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
- if (rc)
- goto err_out_regions;
-
- if (legacy_mode) {
- if (legacy_mode & (1 << 0))
- probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0);
- if (legacy_mode & (1 << 1))
- probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1);
- } else {
- if (n_ports == 2)
- probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
- else
- probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
- }
- if (!probe_ent && !probe_ent2) {
- rc = -ENOMEM;
- goto err_out_regions;
- }
-
- pci_set_master(pdev);
-
- /* FIXME: check ata_device_add return */
- if (legacy_mode) {
- if (legacy_mode & (1 << 0))
- ata_device_add(probe_ent);
- if (legacy_mode & (1 << 1))
- ata_device_add(probe_ent2);
- } else
- ata_device_add(probe_ent);
-
- kfree(probe_ent);
- kfree(probe_ent2);
-
- return 0;
-
-err_out_regions:
- if (legacy_mode & (1 << 0))
- release_region(0x1f0, 8);
- if (legacy_mode & (1 << 1))
- release_region(0x170, 8);
- pci_release_regions(pdev);
-err_out:
- if (disable_dev_on_err)
- pci_disable_device(pdev);
- return rc;
-}
-
-/**
* ata_pci_remove_one - PCI layer callback for device removal
* @pdev: PCI device that was removed
*
@@ -5139,7 +4901,7 @@
EXPORT_SYMBOL_GPL(ata_host_set_remove);
EXPORT_SYMBOL_GPL(ata_sg_init);
EXPORT_SYMBOL_GPL(ata_sg_init_one);
-EXPORT_SYMBOL_GPL(ata_qc_complete);
+EXPORT_SYMBOL_GPL(__ata_qc_complete);
EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
EXPORT_SYMBOL_GPL(ata_eng_timeout);
EXPORT_SYMBOL_GPL(ata_tf_load);
@@ -5165,18 +4927,29 @@
EXPORT_SYMBOL_GPL(sata_phy_reset);
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
+EXPORT_SYMBOL_GPL(ata_std_probeinit);
+EXPORT_SYMBOL_GPL(ata_std_softreset);
+EXPORT_SYMBOL_GPL(sata_std_hardreset);
+EXPORT_SYMBOL_GPL(ata_std_postreset);
+EXPORT_SYMBOL_GPL(ata_std_probe_reset);
+EXPORT_SYMBOL_GPL(ata_drive_probe_reset);
EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
+EXPORT_SYMBOL_GPL(ata_busy_sleep);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
+EXPORT_SYMBOL_GPL(ata_scsi_timed_out);
EXPORT_SYMBOL_GPL(ata_scsi_error);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_release);
EXPORT_SYMBOL_GPL(ata_host_intr);
EXPORT_SYMBOL_GPL(ata_dev_classify);
-EXPORT_SYMBOL_GPL(ata_dev_id_string);
+EXPORT_SYMBOL_GPL(ata_id_string);
+EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_dev_config);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
+EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
+EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_compute);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 07b1e7c..538784e 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -151,7 +151,7 @@
struct scsi_sense_hdr sshdr;
enum dma_data_direction data_dir;
- if (NULL == (void *)arg)
+ if (arg == NULL)
return -EINVAL;
if (copy_from_user(args, arg, sizeof(args)))
@@ -201,7 +201,7 @@
/* Need code to retrieve data from check condition? */
if ((argbuf)
- && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize))
+ && copy_to_user(arg + sizeof(args), argbuf, argsize))
rc = -EFAULT;
error:
if (argbuf)
@@ -228,7 +228,7 @@
u8 args[7];
struct scsi_sense_hdr sshdr;
- if (NULL == (void *)arg)
+ if (arg == NULL)
return -EINVAL;
if (copy_from_user(args, arg, sizeof(args)))
@@ -553,7 +553,7 @@
/*
* Read the controller registers.
*/
- assert(NULL != qc->ap->ops->tf_read);
+ WARN_ON(qc->ap->ops->tf_read == NULL);
qc->ap->ops->tf_read(qc->ap, tf);
/*
@@ -628,7 +628,7 @@
/*
* Read the controller registers.
*/
- assert(NULL != qc->ap->ops->tf_read);
+ WARN_ON(qc->ap->ops->tf_read == NULL);
qc->ap->ops->tf_read(qc->ap, tf);
/*
@@ -684,23 +684,23 @@
if (sdev->id < ATA_MAX_DEVICES) {
struct ata_port *ap;
struct ata_device *dev;
+ unsigned int max_sectors;
ap = (struct ata_port *) &sdev->host->hostdata[0];
dev = &ap->device[sdev->id];
- /* TODO: 1024 is an arbitrary number, not the
+ /* TODO: 2048 is an arbitrary number, not the
* hardware maximum. This should be increased to
* 65534 when Jens Axboe's patch for dynamically
* determining max_sectors is merged.
*/
- if ((dev->flags & ATA_DFLAG_LBA48) &&
- ((dev->flags & ATA_DFLAG_LOCK_SECTORS) == 0)) {
- /*
- * do not overwrite sdev->host->max_sectors, since
- * other drives on this host may not support LBA48
- */
- blk_queue_max_sectors(sdev->request_queue, 2048);
- }
+ max_sectors = ATA_MAX_SECTORS;
+ if (dev->flags & ATA_DFLAG_LBA48)
+ max_sectors = 2048;
+ if (dev->max_sectors)
+ max_sectors = dev->max_sectors;
+
+ blk_queue_max_sectors(sdev->request_queue, max_sectors);
/*
* SATA DMA transfers must be multiples of 4 byte, so
@@ -717,6 +717,47 @@
}
/**
+ * ata_scsi_timed_out - SCSI layer time out callback
+ * @cmd: timed out SCSI command
+ *
+ * Handles SCSI layer timeout. We race with normal completion of
+ * the qc for @cmd. If the qc is already gone, we lose and let
+ * the scsi command finish (EH_HANDLED). Otherwise, the qc has
+ * timed out and EH should be invoked. Prevent ata_qc_complete()
+ * from finishing it by setting EH_SCHEDULED and return
+ * EH_NOT_HANDLED.
+ *
+ * LOCKING:
+ * Called from timer context
+ *
+ * RETURNS:
+ * EH_HANDLED or EH_NOT_HANDLED
+ */
+enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct ata_port *ap = (struct ata_port *) &host->hostdata[0];
+ unsigned long flags;
+ struct ata_queued_cmd *qc;
+ enum scsi_eh_timer_return ret = EH_HANDLED;
+
+ DPRINTK("ENTER\n");
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc) {
+ WARN_ON(qc->scsicmd != cmd);
+ qc->flags |= ATA_QCFLAG_EH_SCHEDULED;
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ ret = EH_NOT_HANDLED;
+ }
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ DPRINTK("EXIT, ret=%d\n", ret);
+ return ret;
+}
+
+/**
* ata_scsi_error - SCSI layer error handler callback
* @host: SCSI host on which error occurred
*
@@ -732,23 +773,82 @@
int ata_scsi_error(struct Scsi_Host *host)
{
struct ata_port *ap;
+ unsigned long flags;
DPRINTK("ENTER\n");
ap = (struct ata_port *) &host->hostdata[0];
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ WARN_ON(ap->flags & ATA_FLAG_IN_EH);
+ ap->flags |= ATA_FLAG_IN_EH;
+ WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
ap->ops->eng_timeout(ap);
- /* TODO: this is per-command; when queueing is supported
- * this code will either change or move to a more
- * appropriate place
- */
- host->host_failed--;
- INIT_LIST_HEAD(&host->eh_cmd_q);
+ WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
+
+ scsi_eh_flush_done_q(&ap->eh_done_q);
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->flags &= ~ATA_FLAG_IN_EH;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
DPRINTK("EXIT\n");
return 0;
}
+static void ata_eh_scsidone(struct scsi_cmnd *scmd)
+{
+ /* nada */
+}
+
+static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ qc->scsidone = ata_eh_scsidone;
+ __ata_qc_complete(qc);
+ WARN_ON(ata_tag_valid(qc->tag));
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
+}
+
+/**
+ * ata_eh_qc_complete - Complete an active ATA command from EH
+ * @qc: Command to complete
+ *
+ * Indicate to the mid and upper layers that an ATA command has
+ * completed. To be used from EH.
+ */
+void ata_eh_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+ scmd->retries = scmd->allowed;
+ __ata_eh_qc_complete(qc);
+}
+
+/**
+ * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
+ * @qc: Command to retry
+ *
+ * Indicate to the mid and upper layers that an ATA command
+ * should be retried. To be used from EH.
+ *
+ * SCSI midlayer limits the number of retries to scmd->allowed.
+ * This function might need to adjust scmd->retries for commands
+ * which get retried due to unrelated NCQ failures.
+ */
+void ata_eh_qc_retry(struct ata_queued_cmd *qc)
+{
+ __ata_eh_qc_complete(qc);
+}
+
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
@@ -985,9 +1085,13 @@
if (dev->flags & ATA_DFLAG_LBA) {
tf->flags |= ATA_TFLAG_LBA;
- if (dev->flags & ATA_DFLAG_LBA48) {
- if (n_block > (64 * 1024))
- goto invalid_fld;
+ if (lba_28_ok(block, n_block)) {
+ /* use LBA28 */
+ tf->command = ATA_CMD_VERIFY;
+ tf->device |= (block >> 24) & 0xf;
+ } else if (lba_48_ok(block, n_block)) {
+ if (!(dev->flags & ATA_DFLAG_LBA48))
+ goto out_of_range;
/* use LBA48 */
tf->flags |= ATA_TFLAG_LBA48;
@@ -998,15 +1102,9 @@
tf->hob_lbah = (block >> 40) & 0xff;
tf->hob_lbam = (block >> 32) & 0xff;
tf->hob_lbal = (block >> 24) & 0xff;
- } else {
- if (n_block > 256)
- goto invalid_fld;
-
- /* use LBA28 */
- tf->command = ATA_CMD_VERIFY;
-
- tf->device |= (block >> 24) & 0xf;
- }
+ } else
+ /* request too large even for LBA48 */
+ goto out_of_range;
tf->nsect = n_block & 0xff;
@@ -1019,8 +1117,8 @@
/* CHS */
u32 sect, head, cyl, track;
- if (n_block > 256)
- goto invalid_fld;
+ if (!lba_28_ok(block, n_block))
+ goto out_of_range;
/* Convert LBA to CHS */
track = (u32)block / dev->sectors;
@@ -1139,9 +1237,11 @@
if (dev->flags & ATA_DFLAG_LBA) {
tf->flags |= ATA_TFLAG_LBA;
- if (dev->flags & ATA_DFLAG_LBA48) {
- /* The request -may- be too large for LBA48. */
- if ((block >> 48) || (n_block > 65536))
+ if (lba_28_ok(block, n_block)) {
+ /* use LBA28 */
+ tf->device |= (block >> 24) & 0xf;
+ } else if (lba_48_ok(block, n_block)) {
+ if (!(dev->flags & ATA_DFLAG_LBA48))
goto out_of_range;
/* use LBA48 */
@@ -1152,15 +1252,9 @@
tf->hob_lbah = (block >> 40) & 0xff;
tf->hob_lbam = (block >> 32) & 0xff;
tf->hob_lbal = (block >> 24) & 0xff;
- } else {
- /* use LBA28 */
-
- /* The request -may- be too large for LBA28. */
- if ((block >> 28) || (n_block > 256))
- goto out_of_range;
-
- tf->device |= (block >> 24) & 0xf;
- }
+ } else
+ /* request too large even for LBA48 */
+ goto out_of_range;
if (unlikely(ata_rwcmd_protocol(qc) < 0))
goto invalid_fld;
@@ -1178,7 +1272,7 @@
u32 sect, head, cyl, track;
/* The request -may- be too large for CHS addressing. */
- if ((block >> 28) || (n_block > 256))
+ if (!lba_28_ok(block, n_block))
goto out_of_range;
if (unlikely(ata_rwcmd_protocol(qc) < 0))
@@ -1225,7 +1319,7 @@
return 1;
}
-static int ata_scsi_qc_complete(struct ata_queued_cmd *qc)
+static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *cmd = qc->scsicmd;
u8 *cdb = cmd->cmnd;
@@ -1262,7 +1356,7 @@
qc->scsidone(cmd);
- return 0;
+ ata_qc_free(qc);
}
/**
@@ -1328,8 +1422,9 @@
goto early_finish;
/* select device, send command to hardware */
- if (ata_qc_issue(qc))
- goto err_did;
+ qc->err_mask = ata_qc_issue(qc);
+ if (qc->err_mask)
+ ata_qc_complete(qc);
VPRINTK("EXIT\n");
return;
@@ -1472,8 +1567,8 @@
if (buflen > 35) {
memcpy(&rbuf[8], "ATA ", 8);
- ata_dev_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16);
- ata_dev_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4);
+ ata_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16);
+ ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4);
if (rbuf[32] == 0 || rbuf[32] == ' ')
memcpy(&rbuf[32], "n/a ", 4);
}
@@ -1547,8 +1642,8 @@
memcpy(rbuf, hdr, sizeof(hdr));
if (buflen > (ATA_SERNO_LEN + 4 - 1))
- ata_dev_id_string(args->id, (unsigned char *) &rbuf[4],
- ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
+ ata_id_string(args->id, (unsigned char *) &rbuf[4],
+ ATA_ID_SERNO_OFS, ATA_SERNO_LEN);
return 0;
}
@@ -1711,15 +1806,12 @@
if (!ata_id_has_fua(id))
return 0;
- model[40] = '\0';
- fw[8] = '\0';
+ ata_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model));
+ ata_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw));
- ata_dev_id_string(id, model, ATA_ID_PROD_OFS, sizeof(model) - 1);
- ata_dev_id_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw) - 1);
-
- if (strncmp(model, "Maxtor", 6))
+ if (strcmp(model, "Maxtor"))
return 1;
- if (strncmp(fw, "BANC1G10", 8))
+ if (strcmp(fw, "BANC1G10"))
return 1;
return 0; /* blacklisted */
@@ -2013,7 +2105,7 @@
done(cmd);
}
-static int atapi_sense_complete(struct ata_queued_cmd *qc)
+static void atapi_sense_complete(struct ata_queued_cmd *qc)
{
if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0))
/* FIXME: not quite right; we don't want the
@@ -2024,7 +2116,7 @@
ata_gen_ata_desc_sense(qc);
qc->scsidone(qc->scsicmd);
- return 0;
+ ata_qc_free(qc);
}
/* is it pointless to prefer PIO for "safety reasons"? */
@@ -2054,7 +2146,7 @@
ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
qc->dma_dir = DMA_FROM_DEVICE;
- memset(&qc->cdb, 0, ap->cdb_len);
+ memset(&qc->cdb, 0, qc->dev->cdb_len);
qc->cdb[0] = REQUEST_SENSE;
qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
@@ -2073,15 +2165,14 @@
qc->complete_fn = atapi_sense_complete;
- if (ata_qc_issue(qc)) {
- qc->err_mask |= AC_ERR_OTHER;
+ qc->err_mask = ata_qc_issue(qc);
+ if (qc->err_mask)
ata_qc_complete(qc);
- }
DPRINTK("EXIT\n");
}
-static int atapi_qc_complete(struct ata_queued_cmd *qc)
+static void atapi_qc_complete(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *cmd = qc->scsicmd;
unsigned int err_mask = qc->err_mask;
@@ -2091,7 +2182,7 @@
if (unlikely(err_mask & AC_ERR_DEV)) {
cmd->result = SAM_STAT_CHECK_CONDITION;
atapi_request_sense(qc);
- return 1;
+ return;
}
else if (unlikely(err_mask))
@@ -2131,7 +2222,7 @@
}
qc->scsidone(cmd);
- return 0;
+ ata_qc_free(qc);
}
/**
* atapi_xlat - Initialize PACKET taskfile
@@ -2157,7 +2248,7 @@
if (ata_check_atapi_dma(qc))
using_pio = 1;
- memcpy(&qc->cdb, scsicmd, qc->ap->cdb_len);
+ memcpy(&qc->cdb, scsicmd, dev->cdb_len);
qc->complete_fn = atapi_qc_complete;
@@ -2517,7 +2608,8 @@
/**
* ata_scsi_simulate - simulate SCSI command on ATA device
- * @id: current IDENTIFY data for target device.
+ * @ap: port the device is connected to
+ * @dev: the target device
* @cmd: SCSI command being sent to device.
* @done: SCSI command completion function.
*
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index e03ce48..9d76923 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -45,7 +45,7 @@
struct ata_device *dev);
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
extern void ata_qc_free(struct ata_queued_cmd *qc);
-extern int ata_qc_issue(struct ata_queued_cmd *qc);
+extern unsigned int ata_qc_issue(struct ata_queued_cmd *qc);
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index e8df0c9..5f33cc9 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -131,7 +131,7 @@
static void adma_port_stop(struct ata_port *ap);
static void adma_phy_reset(struct ata_port *ap);
static void adma_qc_prep(struct ata_queued_cmd *qc);
-static int adma_qc_issue(struct ata_queued_cmd *qc);
+static unsigned int adma_qc_issue(struct ata_queued_cmd *qc);
static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void adma_bmdma_stop(struct ata_queued_cmd *qc);
static u8 adma_bmdma_status(struct ata_port *ap);
@@ -143,11 +143,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ENABLE_CLUSTERING,
@@ -419,7 +419,7 @@
writew(aPIOMD4 | aGO, chan + ADMA_CONTROL);
}
-static int adma_qc_issue(struct ata_queued_cmd *qc)
+static unsigned int adma_qc_issue(struct ata_queued_cmd *qc)
{
struct adma_port_priv *pp = qc->ap->private_data;
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 2770005..aceaf56 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -37,7 +37,7 @@
#include <asm/io.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "0.5"
+#define DRV_VERSION "0.6"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -228,7 +228,9 @@
MV_HP_ERRATA_50XXB2 = (1 << 2),
MV_HP_ERRATA_60X1B2 = (1 << 3),
MV_HP_ERRATA_60X1C0 = (1 << 4),
- MV_HP_50XX = (1 << 5),
+ MV_HP_ERRATA_XX42A0 = (1 << 5),
+ MV_HP_50XX = (1 << 6),
+ MV_HP_GEN_IIE = (1 << 7),
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0),
@@ -237,6 +239,9 @@
#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX)
#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0)
+#define IS_GEN_I(hpriv) IS_50XX(hpriv)
+#define IS_GEN_II(hpriv) IS_60XX(hpriv)
+#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
enum {
/* Our DMA boundary is determined by an ePRD being unable to handle
@@ -255,6 +260,8 @@
chip_5080,
chip_604x,
chip_608x,
+ chip_6042,
+ chip_7042,
};
/* Command ReQuest Block: 32B */
@@ -265,6 +272,14 @@
u16 ata_cmd[11];
};
+struct mv_crqb_iie {
+ u32 addr;
+ u32 addr_hi;
+ u32 flags;
+ u32 len;
+ u32 ata_cmd[4];
+};
+
/* Command ResPonse Block: 8B */
struct mv_crpb {
u16 id;
@@ -328,7 +343,8 @@
static int mv_port_start(struct ata_port *ap);
static void mv_port_stop(struct ata_port *ap);
static void mv_qc_prep(struct ata_queued_cmd *qc);
-static int mv_qc_issue(struct ata_queued_cmd *qc);
+static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
+static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t mv_interrupt(int irq, void *dev_instance,
struct pt_regs *regs);
static void mv_eng_timeout(struct ata_port *ap);
@@ -362,11 +378,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = MV_USE_Q_DEPTH,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = MV_MAX_SG_CT / 2,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -430,6 +446,33 @@
.host_stop = mv_host_stop,
};
+static const struct ata_port_operations mv_iie_ops = {
+ .port_disable = ata_port_disable,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .phy_reset = mv_phy_reset,
+
+ .qc_prep = mv_qc_prep_iie,
+ .qc_issue = mv_qc_issue,
+
+ .eng_timeout = mv_eng_timeout,
+
+ .irq_handler = mv_interrupt,
+ .irq_clear = mv_irq_clear,
+
+ .scr_read = mv_scr_read,
+ .scr_write = mv_scr_write,
+
+ .port_start = mv_port_start,
+ .port_stop = mv_port_stop,
+ .host_stop = mv_host_stop,
+};
+
static const struct ata_port_info mv_port_info[] = {
{ /* chip_504x */
.sht = &mv_sht,
@@ -467,6 +510,21 @@
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &mv6_ops,
},
+ { /* chip_6042 */
+ .sht = &mv_sht,
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &mv_iie_ops,
+ },
+ { /* chip_7042 */
+ .sht = &mv_sht,
+ .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ MV_FLAG_DUAL_HC),
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &mv_iie_ops,
+ },
};
static const struct pci_device_id mv_pci_tbl[] = {
@@ -477,6 +535,7 @@
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6040), 0, 0, chip_604x},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x},
+ {PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6042), 0, 0, chip_6042},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x},
@@ -572,8 +631,8 @@
* @base: port base address
* @pp: port private data
*
- * Verify the local cache of the eDMA state is accurate with an
- * assert.
+ * Verify the local cache of the eDMA state is accurate with a
+ * WARN_ON.
*
* LOCKING:
* Inherited from caller.
@@ -584,15 +643,15 @@
writelfl(EDMA_EN, base + EDMA_CMD_OFS);
pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
}
- assert(EDMA_EN & readl(base + EDMA_CMD_OFS));
+ WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS)));
}
/**
* mv_stop_dma - Disable eDMA engine
* @ap: ATA channel to manipulate
*
- * Verify the local cache of the eDMA state is accurate with an
- * assert.
+ * Verify the local cache of the eDMA state is accurate with a
+ * WARN_ON.
*
* LOCKING:
* Inherited from caller.
@@ -610,7 +669,7 @@
writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
} else {
- assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)));
+ WARN_ON(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS));
}
/* now properly wait for the eDMA to stop */
@@ -773,6 +832,33 @@
dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma);
}
+static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
+{
+ u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
+
+ /* set up non-NCQ EDMA configuration */
+ cfg &= ~0x1f; /* clear queue depth */
+ cfg &= ~EDMA_CFG_NCQ; /* clear NCQ mode */
+ cfg &= ~(1 << 9); /* disable equeue */
+
+ if (IS_GEN_I(hpriv))
+ cfg |= (1 << 8); /* enab config burst size mask */
+
+ else if (IS_GEN_II(hpriv))
+ cfg |= EDMA_CFG_RD_BRST_EXT | EDMA_CFG_WR_BUFF_LEN;
+
+ else if (IS_GEN_IIE(hpriv)) {
+ cfg |= (1 << 23); /* dis RX PM port mask */
+ cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */
+ cfg &= ~(1 << 19); /* dis 128-entry queue (for now?) */
+ cfg |= (1 << 18); /* enab early completion */
+ cfg |= (1 << 17); /* enab host q cache */
+ cfg |= (1 << 22); /* enab cutthrough */
+ }
+
+ writelfl(cfg, port_mmio + EDMA_CFG_OFS);
+}
+
/**
* mv_port_start - Port specific init/start routine.
* @ap: ATA channel to manipulate
@@ -786,6 +872,7 @@
static int mv_port_start(struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
+ struct mv_host_priv *hpriv = ap->host_set->private_data;
struct mv_port_priv *pp;
void __iomem *port_mmio = mv_ap_base(ap);
void *mem;
@@ -829,17 +916,26 @@
pp->sg_tbl = mem;
pp->sg_tbl_dma = mem_dma;
- writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT |
- EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS);
+ mv_edma_cfg(hpriv, port_mmio);
writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
- writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
- writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+ if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+ writelfl(pp->crqb_dma & 0xffffffff,
+ port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ else
+ writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
+
+ if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+ writelfl(pp->crpb_dma & 0xffffffff,
+ port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+ else
+ writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+
writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
@@ -960,21 +1056,19 @@
struct ata_taskfile *tf;
u16 flags = 0;
- if (ATA_PROT_DMA != qc->tf.protocol) {
+ if (ATA_PROT_DMA != qc->tf.protocol)
return;
- }
/* the req producer index should be the same as we remember it */
- assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
- EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- pp->req_producer);
+ WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ pp->req_producer);
/* Fill in command request block
*/
- if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
- }
- assert(MV_MAX_Q_DEPTH > qc->tag);
+ WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
pp->crqb[pp->req_producer].sg_addr =
@@ -1029,9 +1123,76 @@
mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0);
mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */
- if (!(qc->flags & ATA_QCFLAG_DMAMAP)) {
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
return;
- }
+ mv_fill_sg(qc);
+}
+
+/**
+ * mv_qc_prep_iie - Host specific command preparation.
+ * @qc: queued command to prepare
+ *
+ * This routine simply redirects to the general purpose routine
+ * if command is not DMA. Else, it handles prep of the CRQB
+ * (command request block), does some sanity checking, and calls
+ * the SG load routine.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_crqb_iie *crqb;
+ struct ata_taskfile *tf;
+ u32 flags = 0;
+
+ if (ATA_PROT_DMA != qc->tf.protocol)
+ return;
+
+ /* the req producer index should be the same as we remember it */
+ WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ pp->req_producer);
+
+ /* Fill in Gen IIE command request block
+ */
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ flags |= CRQB_FLAG_READ;
+
+ WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
+ flags |= qc->tag << CRQB_TAG_SHIFT;
+
+ crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+ crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+ crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+ crqb->flags = cpu_to_le32(flags);
+
+ tf = &qc->tf;
+ crqb->ata_cmd[0] = cpu_to_le32(
+ (tf->command << 16) |
+ (tf->feature << 24)
+ );
+ crqb->ata_cmd[1] = cpu_to_le32(
+ (tf->lbal << 0) |
+ (tf->lbam << 8) |
+ (tf->lbah << 16) |
+ (tf->device << 24)
+ );
+ crqb->ata_cmd[2] = cpu_to_le32(
+ (tf->hob_lbal << 0) |
+ (tf->hob_lbam << 8) |
+ (tf->hob_lbah << 16) |
+ (tf->hob_feature << 24)
+ );
+ crqb->ata_cmd[3] = cpu_to_le32(
+ (tf->nsect << 0) |
+ (tf->hob_nsect << 8)
+ );
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
mv_fill_sg(qc);
}
@@ -1047,7 +1208,7 @@
* LOCKING:
* Inherited from caller.
*/
-static int mv_qc_issue(struct ata_queued_cmd *qc)
+static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
{
void __iomem *port_mmio = mv_ap_base(qc->ap);
struct mv_port_priv *pp = qc->ap->private_data;
@@ -1065,12 +1226,12 @@
in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
/* the req producer index should be the same as we remember it */
- assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- pp->req_producer);
+ WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ pp->req_producer);
/* until we do queuing, the queue should be empty at this point */
- assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
- EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+ WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
+ EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
mv_inc_q_index(&pp->req_producer); /* now incr producer index */
@@ -1090,7 +1251,7 @@
*
* This routine is for use when the port is in DMA mode, when it
* will be using the CRPB (command response block) method of
- * returning command completion information. We assert indices
+ * returning command completion information. We check indices
* are good, grab status, and bump the response consumer index to
* prove that we're up to date.
*
@@ -1106,16 +1267,16 @@
out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
/* the response consumer index should be the same as we remember it */
- assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- pp->rsp_consumer);
+ WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ pp->rsp_consumer);
/* increment our consumer index... */
pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
/* and, until we do NCQ, there should only be 1 CRPB waiting */
- assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
- EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) ==
- pp->rsp_consumer);
+ WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
+ EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
+ pp->rsp_consumer);
/* write out our inc'd consumer index so EDMA knows we're caught up */
out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
@@ -1681,6 +1842,12 @@
m2 |= hpriv->signal[port].pre;
m2 &= ~(1 << 16);
+ /* according to mvSata 3.6.1, some IIE values are fixed */
+ if (IS_GEN_IIE(hpriv)) {
+ m2 &= ~0xC30FF01F;
+ m2 |= 0x0000900F;
+ }
+
writel(m2, port_mmio + PHY_MODE2);
}
@@ -1846,7 +2013,6 @@
static void mv_eng_timeout(struct ata_port *ap)
{
struct ata_queued_cmd *qc;
- unsigned long flags;
printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id);
DPRINTK("All regs @ start of eng_timeout\n");
@@ -1861,22 +2027,8 @@
mv_err_intr(ap);
mv_stop_and_reset(ap);
- if (!qc) {
- printk(KERN_ERR "ata%u: BUG: timeout without command\n",
- ap->id);
- } else {
- /* hack alert! We cannot use the supplied completion
- * function from inside the ->eh_strategy_handler() thread.
- * libata is the only user of ->eh_strategy_handler() in
- * any kernel, so the default scsi_done() assumes it is
- * not being called from the SCSI EH.
- */
- spin_lock_irqsave(&ap->host_set->lock, flags);
- qc->scsidone = scsi_finish_command;
- qc->err_mask |= AC_ERR_OTHER;
- ata_qc_complete(qc);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
- }
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ ata_eh_qc_complete(qc);
}
/**
@@ -1995,6 +2147,27 @@
}
break;
+ case chip_7042:
+ case chip_6042:
+ hpriv->ops = &mv6xxx_ops;
+
+ hp_flags |= MV_HP_GEN_IIE;
+
+ switch (rev_id) {
+ case 0x0:
+ hp_flags |= MV_HP_ERRATA_XX42A0;
+ break;
+ case 0x1:
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
+ default:
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "Applying 60X1C0 workarounds to unknown rev\n");
+ hp_flags |= MV_HP_ERRATA_60X1C0;
+ break;
+ }
+ break;
+
default:
printk(KERN_ERR DRV_NAME ": BUG: invalid board index %u\n", board_idx);
return 1;
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index bbbb55e..caffadc 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -229,11 +229,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index b0b0a69..ba2b7a0 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -46,7 +46,7 @@
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "1.03"
+#define DRV_VERSION "1.04"
enum {
@@ -58,6 +58,7 @@
PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */
PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */
PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */
+ PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */
PDC_SLEW_CTL = 0x470, /* slew rate control reg */
PDC_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) |
@@ -67,8 +68,10 @@
board_20319 = 1, /* FastTrak S150 TX4 */
board_20619 = 2, /* FastTrak TX4000 */
board_20771 = 3, /* FastTrak TX2300 */
+ board_2057x = 4, /* SATAII150 Tx2plus */
+ board_40518 = 5, /* SATAII150 Tx4 */
- PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */
+ PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */
PDC_RESET = (1 << 11), /* HDMA reset */
@@ -82,6 +85,10 @@
dma_addr_t pkt_dma;
};
+struct pdc_host_priv {
+ int hotplug_offset;
+};
+
static u32 pdc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void pdc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -95,7 +102,8 @@
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
static void pdc_irq_clear(struct ata_port *ap);
-static int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
+static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
+static void pdc_host_stop(struct ata_host_set *host_set);
static struct scsi_host_template pdc_ata_sht = {
@@ -103,11 +111,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -137,7 +145,7 @@
.scr_write = pdc_sata_scr_write,
.port_start = pdc_port_start,
.port_stop = pdc_port_stop,
- .host_stop = ata_pci_host_stop,
+ .host_stop = pdc_host_stop,
};
static const struct ata_port_operations pdc_pata_ops = {
@@ -158,7 +166,7 @@
.port_start = pdc_port_start,
.port_stop = pdc_port_stop,
- .host_stop = ata_pci_host_stop,
+ .host_stop = pdc_host_stop,
};
static const struct ata_port_info pdc_port_info[] = {
@@ -201,6 +209,26 @@
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &pdc_sata_ops,
},
+
+ /* board_2057x */
+ {
+ .sht = &pdc_ata_sht,
+ .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &pdc_sata_ops,
+ },
+
+ /* board_40518 */
+ {
+ .sht = &pdc_ata_sht,
+ .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &pdc_sata_ops,
+ },
};
static const struct pci_device_id pdc_ata_pci_tbl[] = {
@@ -217,9 +245,9 @@
{ PCI_VENDOR_ID_PROMISE, 0x3376, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
{ PCI_VENDOR_ID_PROMISE, 0x3574, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_2037x },
+ board_2057x },
{ PCI_VENDOR_ID_PROMISE, 0x3d75, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_2037x },
+ board_2057x },
{ PCI_VENDOR_ID_PROMISE, 0x3d73, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_2037x },
@@ -232,7 +260,7 @@
{ PCI_VENDOR_ID_PROMISE, 0x3d17, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20319 },
{ PCI_VENDOR_ID_PROMISE, 0x3d18, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- board_20319 },
+ board_40518 },
{ PCI_VENDOR_ID_PROMISE, 0x6629, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20619 },
@@ -261,12 +289,11 @@
if (rc)
return rc;
- pp = kmalloc(sizeof(*pp), GFP_KERNEL);
+ pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp) {
rc = -ENOMEM;
goto err_out;
}
- memset(pp, 0, sizeof(*pp));
pp->pkt = dma_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL);
if (!pp->pkt) {
@@ -298,6 +325,16 @@
}
+static void pdc_host_stop(struct ata_host_set *host_set)
+{
+ struct pdc_host_priv *hp = host_set->private_data;
+
+ ata_pci_host_stop(host_set);
+
+ kfree(hp);
+}
+
+
static void pdc_reset_port(struct ata_port *ap)
{
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_CTLSTAT;
@@ -394,19 +431,6 @@
spin_lock_irqsave(&host_set->lock, flags);
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (!qc) {
- printk(KERN_ERR "ata%u: BUG: timeout without command\n",
- ap->id);
- goto out;
- }
-
- /* hack alert! We cannot use the supplied completion
- * function from inside the ->eh_strategy_handler() thread.
- * libata is the only user of ->eh_strategy_handler() in
- * any kernel, so the default scsi_done() assumes it is
- * not being called from the SCSI EH.
- */
- qc->scsidone = scsi_finish_command;
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
@@ -414,7 +438,6 @@
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
drv_stat = ata_wait_idle(ap);
qc->err_mask |= __ac_err_mask(drv_stat);
- ata_qc_complete(qc);
break;
default:
@@ -424,12 +447,11 @@
ap->id, qc->tf.command, drv_stat);
qc->err_mask |= ac_err_mask(drv_stat);
- ata_qc_complete(qc);
break;
}
-out:
spin_unlock_irqrestore(&host_set->lock, flags);
+ ata_eh_qc_complete(qc);
DPRINTK("EXIT\n");
}
@@ -495,14 +517,15 @@
VPRINTK("QUICK EXIT 2\n");
return IRQ_NONE;
}
+
+ spin_lock(&host_set->lock);
+
mask &= 0xffff; /* only 16 tags possible */
if (!mask) {
VPRINTK("QUICK EXIT 3\n");
- return IRQ_NONE;
+ goto done_irq;
}
- spin_lock(&host_set->lock);
-
writel(mask, mmio_base + PDC_INT_SEQMASK);
for (i = 0; i < host_set->n_ports; i++) {
@@ -519,10 +542,10 @@
}
}
- spin_unlock(&host_set->lock);
-
VPRINTK("EXIT\n");
+done_irq:
+ spin_unlock(&host_set->lock);
return IRQ_RETVAL(handled);
}
@@ -544,7 +567,7 @@
readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
}
-static int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
@@ -600,6 +623,8 @@
static void pdc_host_init(unsigned int chip_id, struct ata_probe_ent *pe)
{
void __iomem *mmio = pe->mmio_base;
+ struct pdc_host_priv *hp = pe->private_data;
+ int hotplug_offset = hp->hotplug_offset;
u32 tmp;
/*
@@ -614,12 +639,12 @@
writel(tmp, mmio + PDC_FLASH_CTL);
/* clear plug/unplug flags for all ports */
- tmp = readl(mmio + PDC_SATA_PLUG_CSR);
- writel(tmp | 0xff, mmio + PDC_SATA_PLUG_CSR);
+ tmp = readl(mmio + hotplug_offset);
+ writel(tmp | 0xff, mmio + hotplug_offset);
/* mask plug/unplug ints */
- tmp = readl(mmio + PDC_SATA_PLUG_CSR);
- writel(tmp | 0xff0000, mmio + PDC_SATA_PLUG_CSR);
+ tmp = readl(mmio + hotplug_offset);
+ writel(tmp | 0xff0000, mmio + hotplug_offset);
/* reduce TBG clock to 133 Mhz. */
tmp = readl(mmio + PDC_TBG_MODE);
@@ -641,6 +666,7 @@
{
static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
+ struct pdc_host_priv *hp;
unsigned long base;
void __iomem *mmio_base;
unsigned int board_idx = (unsigned int) ent->driver_data;
@@ -671,13 +697,12 @@
if (rc)
goto err_out_regions;
- probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
if (probe_ent == NULL) {
rc = -ENOMEM;
goto err_out_regions;
}
- memset(probe_ent, 0, sizeof(*probe_ent));
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
@@ -688,6 +713,16 @@
}
base = (unsigned long) mmio_base;
+ hp = kzalloc(sizeof(*hp), GFP_KERNEL);
+ if (hp == NULL) {
+ rc = -ENOMEM;
+ goto err_out_free_ent;
+ }
+
+ /* Set default hotplug offset */
+ hp->hotplug_offset = PDC_SATA_PLUG_CSR;
+ probe_ent->private_data = hp;
+
probe_ent->sht = pdc_port_info[board_idx].sht;
probe_ent->host_flags = pdc_port_info[board_idx].host_flags;
probe_ent->pio_mask = pdc_port_info[board_idx].pio_mask;
@@ -707,6 +742,10 @@
/* notice 4-port boards */
switch (board_idx) {
+ case board_40518:
+ /* Override hotplug offset for SATAII150 */
+ hp->hotplug_offset = PDC2_SATA_PLUG_CSR;
+ /* Fall through */
case board_20319:
probe_ent->n_ports = 4;
@@ -716,6 +755,10 @@
probe_ent->port[2].scr_addr = base + 0x600;
probe_ent->port[3].scr_addr = base + 0x700;
break;
+ case board_2057x:
+ /* Override hotplug offset for SATAII150 */
+ hp->hotplug_offset = PDC2_SATA_PLUG_CSR;
+ /* Fall through */
case board_2037x:
probe_ent->n_ports = 2;
break;
@@ -741,8 +784,10 @@
/* initialize adapter */
pdc_host_init(board_idx, probe_ent);
- /* FIXME: check ata_device_add return value */
- ata_device_add(probe_ent);
+ /* FIXME: Need any other frees than hp? */
+ if (!ata_device_add(probe_ent))
+ kfree(hp);
+
kfree(probe_ent);
return 0;
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index 80480f0..9602f43 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -120,7 +120,7 @@
static void qs_port_stop(struct ata_port *ap);
static void qs_phy_reset(struct ata_port *ap);
static void qs_qc_prep(struct ata_queued_cmd *qc);
-static int qs_qc_issue(struct ata_queued_cmd *qc);
+static unsigned int qs_qc_issue(struct ata_queued_cmd *qc);
static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
static void qs_bmdma_stop(struct ata_queued_cmd *qc);
static u8 qs_bmdma_status(struct ata_port *ap);
@@ -132,11 +132,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = QS_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
//FIXME .use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -276,8 +276,8 @@
unsigned int nelem;
u8 *prd = pp->pkt + QS_CPB_BYTES;
- assert(qc->__sg != NULL);
- assert(qc->n_elem > 0 || qc->pad_len > 0);
+ WARN_ON(qc->__sg == NULL);
+ WARN_ON(qc->n_elem == 0 && qc->pad_len == 0);
nelem = 0;
ata_for_each_sg(sg, qc) {
@@ -352,7 +352,7 @@
readl(chan + QS_CCT_CFF); /* flush */
}
-static int qs_qc_issue(struct ata_queued_cmd *qc)
+static unsigned int qs_qc_issue(struct ata_queued_cmd *qc)
{
struct qs_port_priv *pp = qc->ap->private_data;
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 17f74d3..e14ed4e 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -135,11 +135,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -157,7 +157,7 @@
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = sata_phy_reset,
+ .probe_reset = ata_std_probe_reset,
.post_set_mode = sil_post_set_mode,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
@@ -180,7 +180,7 @@
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@@ -189,8 +189,7 @@
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO |
- SIL_FLAG_MOD15WRITE,
+ ATA_FLAG_MMIO | SIL_FLAG_MOD15WRITE,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@@ -199,7 +198,7 @@
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@@ -337,22 +336,12 @@
static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
{
unsigned int n, quirks = 0;
- unsigned char model_num[40];
- const char *s;
- unsigned int len;
+ unsigned char model_num[41];
- ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS,
- sizeof(model_num));
- s = &model_num[0];
- len = strnlen(s, sizeof(model_num));
-
- /* ATAPI specifies that empty space is blank-filled; remove blanks */
- while ((len > 0) && (s[len - 1] == ' '))
- len--;
+ ata_id_c_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num));
for (n = 0; sil_blacklist[n].product; n++)
- if (!memcmp(sil_blacklist[n].product, s,
- strlen(sil_blacklist[n].product))) {
+ if (!strcmp(sil_blacklist[n].product, model_num)) {
quirks = sil_blacklist[n].quirk;
break;
}
@@ -363,16 +352,14 @@
(quirks & SIL_QUIRK_MOD15WRITE))) {
printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n",
ap->id, dev->devno);
- ap->host->max_sectors = 15;
- ap->host->hostt->max_sectors = 15;
- dev->flags |= ATA_DFLAG_LOCK_SECTORS;
+ dev->max_sectors = 15;
return;
}
/* limit to udma5 */
if (quirks & SIL_QUIRK_UDMA5MAX) {
printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n",
- ap->id, dev->devno, s);
+ ap->id, dev->devno, model_num);
ap->udma_mask &= ATA_UDMA5;
return;
}
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 9231301..a0e35a2 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -249,9 +249,9 @@
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
-static void sil24_phy_reset(struct ata_port *ap);
+static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes);
static void sil24_qc_prep(struct ata_queued_cmd *qc);
-static int sil24_qc_issue(struct ata_queued_cmd *qc);
+static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
static void sil24_irq_clear(struct ata_port *ap);
static void sil24_eng_timeout(struct ata_port *ap);
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
@@ -280,11 +280,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -305,7 +305,7 @@
.tf_read = sil24_tf_read,
- .phy_reset = sil24_phy_reset,
+ .probe_reset = sil24_probe_reset,
.qc_prep = sil24_qc_prep,
.qc_issue = sil24_qc_issue,
@@ -335,8 +335,8 @@
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO |
- ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4),
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ SIL24_NPORTS2FLAG(4),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@@ -346,8 +346,8 @@
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO |
- ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2),
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ SIL24_NPORTS2FLAG(2),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@@ -357,8 +357,8 @@
{
.sht = &sil24_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO |
- ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1),
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ SIL24_NPORTS2FLAG(1),
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@@ -370,7 +370,7 @@
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
- if (ap->cdb_len == 16)
+ if (dev->cdb_len == 16)
writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
else
writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
@@ -427,7 +427,8 @@
*tf = pp->tf;
}
-static int sil24_issue_SRST(struct ata_port *ap)
+static int sil24_softreset(struct ata_port *ap, int verbose,
+ unsigned int *class)
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
struct sil24_port_priv *pp = ap->private_data;
@@ -436,6 +437,8 @@
u32 irq_enable, irq_stat;
int cnt;
+ DPRINTK("ENTER\n");
+
/* temporarily turn off IRQs during SRST */
irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
@@ -465,30 +468,36 @@
/* restore IRQs */
writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
- if (!(irq_stat & PORT_IRQ_COMPLETE))
- return -1;
+ if (sata_dev_present(ap)) {
+ if (!(irq_stat & PORT_IRQ_COMPLETE)) {
+ DPRINTK("EXIT, srst failed\n");
+ return -EIO;
+ }
- /* update TF */
- sil24_update_tf(ap);
+ sil24_update_tf(ap);
+ *class = ata_dev_classify(&pp->tf);
+ }
+ if (*class == ATA_DEV_UNKNOWN)
+ *class = ATA_DEV_NONE;
+
+ DPRINTK("EXIT, class=%u\n", *class);
return 0;
}
-static void sil24_phy_reset(struct ata_port *ap)
+static int sil24_hardreset(struct ata_port *ap, int verbose,
+ unsigned int *class)
{
- struct sil24_port_priv *pp = ap->private_data;
+ unsigned int dummy_class;
- __sata_phy_reset(ap);
- if (ap->flags & ATA_FLAG_PORT_DISABLED)
- return;
+ /* sil24 doesn't report device signature after hard reset */
+ return sata_std_hardreset(ap, verbose, &dummy_class);
+}
- if (sil24_issue_SRST(ap) < 0) {
- printk(KERN_ERR DRV_NAME
- " ata%u: SRST failed, disabling port\n", ap->id);
- ap->ops->port_disable(ap);
- return;
- }
-
- ap->device->class = ata_dev_classify(&pp->tf);
+static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes)
+{
+ return ata_drive_probe_reset(ap, ata_std_probeinit,
+ sil24_softreset, sil24_hardreset,
+ ata_std_postreset, classes);
}
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
@@ -533,7 +542,7 @@
prb = &cb->atapi.prb;
sge = cb->atapi.sge;
memset(cb->atapi.cdb, 0, 32);
- memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len);
+ memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
if (qc->tf.flags & ATA_TFLAG_WRITE)
@@ -557,7 +566,7 @@
sil24_fill_sg(qc, sge);
}
-static int sil24_qc_issue(struct ata_queued_cmd *qc)
+static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
@@ -638,23 +647,10 @@
struct ata_queued_cmd *qc;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (!qc) {
- printk(KERN_ERR "ata%u: BUG: timeout without command\n",
- ap->id);
- return;
- }
- /*
- * hack alert! We cannot use the supplied completion
- * function from inside the ->eh_strategy_handler() thread.
- * libata is the only user of ->eh_strategy_handler() in
- * any kernel, so the default scsi_done() assumes it is
- * not being called from the SCSI EH.
- */
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
- qc->scsidone = scsi_finish_command;
- qc->err_mask |= AC_ERR_OTHER;
- ata_qc_complete(qc);
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ ata_eh_qc_complete(qc);
sil24_reset_controller(ap);
}
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 2df8c56..7fd45f8 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -87,11 +87,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = ATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index d847256..4aaccd5 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -288,11 +288,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index bc87c16..9f8a768 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -174,7 +174,7 @@
static void pdc20621_put_to_dimm(struct ata_probe_ent *pe,
void *psource, u32 offset, u32 size);
static void pdc20621_irq_clear(struct ata_port *ap);
-static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
+static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
static struct scsi_host_template pdc_sata_sht = {
@@ -182,11 +182,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
@@ -460,7 +460,7 @@
unsigned int i, idx, total_len = 0, sgt_len;
u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
- assert(qc->flags & ATA_QCFLAG_DMAMAP);
+ WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
VPRINTK("ata%u: ENTER\n", ap->id);
@@ -678,7 +678,7 @@
}
}
-static int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
+static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
@@ -866,26 +866,12 @@
spin_lock_irqsave(&host_set->lock, flags);
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (!qc) {
- printk(KERN_ERR "ata%u: BUG: timeout without command\n",
- ap->id);
- goto out;
- }
-
- /* hack alert! We cannot use the supplied completion
- * function from inside the ->eh_strategy_handler() thread.
- * libata is the only user of ->eh_strategy_handler() in
- * any kernel, so the default scsi_done() assumes it is
- * not being called from the SCSI EH.
- */
- qc->scsidone = scsi_finish_command;
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
qc->err_mask |= __ac_err_mask(ata_wait_idle(ap));
- ata_qc_complete(qc);
break;
default:
@@ -895,12 +881,11 @@
ap->id, qc->tf.command, drv_stat);
qc->err_mask |= ac_err_mask(drv_stat);
- ata_qc_complete(qc);
break;
}
-out:
spin_unlock_irqrestore(&host_set->lock, flags);
+ ata_eh_qc_complete(qc);
DPRINTK("EXIT\n");
}
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index 9635ca7..37a487b 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -75,11 +75,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 6d5b0a7..ff65a0b 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -94,11 +94,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index e484e8d..b574379 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -251,11 +251,11 @@
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
+ .eh_timed_out = ata_scsi_timed_out,
.eh_strategy_handler = ata_scsi_error,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 5cc97b7..50f8057 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -584,8 +584,7 @@
* keep a list of pending commands for final completion, and once we
* are ready to leave error handling we handle completion for real.
**/
-static void scsi_eh_finish_cmd(struct scsi_cmnd *scmd,
- struct list_head *done_q)
+void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q)
{
scmd->device->host->host_failed--;
scmd->eh_eflags = 0;
@@ -597,6 +596,7 @@
scsi_setup_cmd_retry(scmd);
list_move_tail(&scmd->eh_entry, done_q);
}
+EXPORT_SYMBOL(scsi_eh_finish_cmd);
/**
* scsi_eh_get_sense - Get device sense data.
@@ -1425,7 +1425,7 @@
* @done_q: list_head of processed commands.
*
**/
-static void scsi_eh_flush_done_q(struct list_head *done_q)
+void scsi_eh_flush_done_q(struct list_head *done_q)
{
struct scsi_cmnd *scmd, *next;
@@ -1454,6 +1454,7 @@
}
}
}
+EXPORT_SYMBOL(scsi_eh_flush_done_q);
/**
* scsi_unjam_host - Attempt to fix a host which has a cmd that failed.
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 94f77cc..b02a16c 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -267,6 +267,16 @@
((u64) (id)[(n) + 1] << 16) | \
((u64) (id)[(n) + 0]) )
+static inline unsigned int ata_id_major_version(const u16 *id)
+{
+ unsigned int mver;
+
+ for (mver = 14; mver >= 1; mver--)
+ if (id[ATA_ID_MAJOR_VER] & (1 << mver))
+ break;
+ return mver;
+}
+
static inline int ata_id_current_chs_valid(const u16 *id)
{
/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
@@ -302,4 +312,16 @@
== ATA_DRDY);
}
+static inline int lba_28_ok(u64 block, u32 n_block)
+{
+ /* check the ending block number */
+ return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
+}
+
+static inline int lba_48_ok(u64 block, u32 n_block)
+{
+ /* check the ending block number */
+ return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536);
+}
+
#endif /* __LINUX_ATA_H__ */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index c91be5e..66b6847 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -35,7 +35,8 @@
#include <linux/workqueue.h>
/*
- * compile-time options
+ * compile-time options: to be removed as soon as all the drivers are
+ * converted to the new debugging mechanism
*/
#undef ATA_DEBUG /* debugging output */
#undef ATA_VERBOSE_DEBUG /* yet more debugging output */
@@ -61,15 +62,37 @@
#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
-#ifdef ATA_NDEBUG
-#define assert(expr)
-#else
-#define assert(expr) \
- if(unlikely(!(expr))) { \
- printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \
- #expr,__FILE__,__FUNCTION__,__LINE__); \
- }
-#endif
+/* NEW: debug levels */
+#define HAVE_LIBATA_MSG 1
+
+enum {
+ ATA_MSG_DRV = 0x0001,
+ ATA_MSG_INFO = 0x0002,
+ ATA_MSG_PROBE = 0x0004,
+ ATA_MSG_WARN = 0x0008,
+ ATA_MSG_MALLOC = 0x0010,
+ ATA_MSG_CTL = 0x0020,
+ ATA_MSG_INTR = 0x0040,
+ ATA_MSG_ERR = 0x0080,
+};
+
+#define ata_msg_drv(p) ((p)->msg_enable & ATA_MSG_DRV)
+#define ata_msg_info(p) ((p)->msg_enable & ATA_MSG_INFO)
+#define ata_msg_probe(p) ((p)->msg_enable & ATA_MSG_PROBE)
+#define ata_msg_warn(p) ((p)->msg_enable & ATA_MSG_WARN)
+#define ata_msg_malloc(p) ((p)->msg_enable & ATA_MSG_MALLOC)
+#define ata_msg_ctl(p) ((p)->msg_enable & ATA_MSG_CTL)
+#define ata_msg_intr(p) ((p)->msg_enable & ATA_MSG_INTR)
+#define ata_msg_err(p) ((p)->msg_enable & ATA_MSG_ERR)
+
+static inline u32 ata_msg_init(int dval, int default_msg_enable_bits)
+{
+ if (dval < 0 || dval >= (sizeof(u32) * 8))
+ return default_msg_enable_bits; /* should be 0x1 - only driver info msgs */
+ if (!dval)
+ return 0;
+ return (1 << dval) - 1;
+}
/* defines only for the constants which don't work well as enums */
#define ATA_TAG_POISON 0xfafbfcfdU
@@ -99,8 +122,7 @@
/* struct ata_device stuff */
ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */
ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */
- ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */
- ATA_DFLAG_LBA = (1 << 3), /* device supports LBA */
+ ATA_DFLAG_LBA = (1 << 2), /* device supports LBA */
ATA_DEV_UNKNOWN = 0, /* unknown device */
ATA_DEV_ATA = 1, /* ATA device */
@@ -115,9 +137,9 @@
ATA_FLAG_PORT_DISABLED = (1 << 2), /* port is disabled, ignore it */
ATA_FLAG_SATA = (1 << 3),
ATA_FLAG_NO_LEGACY = (1 << 4), /* no legacy mode check */
- ATA_FLAG_SRST = (1 << 5), /* use ATA SRST, not E.D.D. */
+ ATA_FLAG_SRST = (1 << 5), /* (obsolete) use ATA SRST, not E.D.D. */
ATA_FLAG_MMIO = (1 << 6), /* use MMIO, not PIO */
- ATA_FLAG_SATA_RESET = (1 << 7), /* use COMRESET */
+ ATA_FLAG_SATA_RESET = (1 << 7), /* (obsolete) use COMRESET */
ATA_FLAG_PIO_DMA = (1 << 8), /* PIO cmds via DMA */
ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once
* proper HSM is in place. */
@@ -129,10 +151,14 @@
ATA_FLAG_PIO_LBA48 = (1 << 13), /* Host DMA engine is LBA28 only */
ATA_FLAG_IRQ_MASK = (1 << 14), /* Mask IRQ in PIO xfers */
+ ATA_FLAG_FLUSH_PIO_TASK = (1 << 15), /* Flush PIO task */
+ ATA_FLAG_IN_EH = (1 << 16), /* EH in progress */
+
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */
ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
+ ATA_QCFLAG_EH_SCHEDULED = (1 << 5), /* EH scheduled */
/* various lengths of time */
ATA_TMOUT_EDD = 5 * HZ, /* heuristic */
@@ -189,10 +215,15 @@
};
enum ata_completion_errors {
- AC_ERR_OTHER = (1 << 0),
- AC_ERR_DEV = (1 << 1),
- AC_ERR_ATA_BUS = (1 << 2),
- AC_ERR_HOST_BUS = (1 << 3),
+ AC_ERR_DEV = (1 << 0), /* device reported error */
+ AC_ERR_HSM = (1 << 1), /* host state machine violation */
+ AC_ERR_TIMEOUT = (1 << 2), /* timeout */
+ AC_ERR_MEDIA = (1 << 3), /* media error */
+ AC_ERR_ATA_BUS = (1 << 4), /* ATA bus error */
+ AC_ERR_HOST_BUS = (1 << 5), /* host bus error */
+ AC_ERR_SYSTEM = (1 << 6), /* system error */
+ AC_ERR_INVALID = (1 << 7), /* invalid argument */
+ AC_ERR_OTHER = (1 << 8), /* unknown */
};
/* forward declarations */
@@ -202,7 +233,10 @@
struct ata_queued_cmd;
/* typedefs */
-typedef int (*ata_qc_cb_t) (struct ata_queued_cmd *qc);
+typedef void (*ata_qc_cb_t) (struct ata_queued_cmd *qc);
+typedef void (*ata_probeinit_fn_t)(struct ata_port *);
+typedef int (*ata_reset_fn_t)(struct ata_port *, int, unsigned int *);
+typedef void (*ata_postreset_fn_t)(struct ata_port *ap, unsigned int *);
struct ata_ioports {
unsigned long cmd_addr;
@@ -313,6 +347,8 @@
unsigned int multi_count; /* sectors count for
READ/WRITE MULTIPLE */
+ unsigned int max_sectors; /* per-device max sectors */
+ unsigned int cdb_len;
/* for CHS addressing */
u16 cylinders; /* Number of cylinders */
@@ -342,7 +378,6 @@
unsigned int mwdma_mask;
unsigned int udma_mask;
unsigned int cbl; /* cable type; ATA_CBL_xxx */
- unsigned int cdb_len;
struct ata_device device[ATA_MAX_DEVICES];
@@ -359,6 +394,9 @@
unsigned int hsm_task_state;
unsigned long pio_task_timeout;
+ u32 msg_enable;
+ struct list_head eh_done_q;
+
void *private_data;
};
@@ -378,7 +416,9 @@
u8 (*check_altstatus)(struct ata_port *ap);
void (*dev_select)(struct ata_port *ap, unsigned int device);
- void (*phy_reset) (struct ata_port *ap);
+ void (*phy_reset) (struct ata_port *ap); /* obsolete */
+ int (*probe_reset) (struct ata_port *ap, unsigned int *classes);
+
void (*post_set_mode) (struct ata_port *ap);
int (*check_atapi_dma) (struct ata_queued_cmd *qc);
@@ -387,7 +427,7 @@
void (*bmdma_start) (struct ata_queued_cmd *qc);
void (*qc_prep) (struct ata_queued_cmd *qc);
- int (*qc_issue) (struct ata_queued_cmd *qc);
+ unsigned int (*qc_issue) (struct ata_queued_cmd *qc);
void (*eng_timeout) (struct ata_port *ap);
@@ -435,6 +475,16 @@
extern void __sata_phy_reset(struct ata_port *ap);
extern void sata_phy_reset(struct ata_port *ap);
extern void ata_bus_reset(struct ata_port *ap);
+extern int ata_drive_probe_reset(struct ata_port *ap,
+ ata_probeinit_fn_t probeinit,
+ ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
+ ata_postreset_fn_t postreset, unsigned int *classes);
+extern void ata_std_probeinit(struct ata_port *ap);
+extern int ata_std_softreset(struct ata_port *ap, int verbose,
+ unsigned int *classes);
+extern int sata_std_hardreset(struct ata_port *ap, int verbose,
+ unsigned int *class);
+extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes);
extern void ata_port_disable(struct ata_port *);
extern void ata_std_ports(struct ata_ioports *ioaddr);
#ifdef CONFIG_PCI
@@ -449,7 +499,10 @@
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
+extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
extern int ata_scsi_error(struct Scsi_Host *host);
+extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
+extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
extern int ata_scsi_device_resume(struct scsi_device *);
@@ -457,6 +510,9 @@
extern int ata_device_resume(struct ata_port *, struct ata_device *);
extern int ata_device_suspend(struct ata_port *, struct ata_device *);
extern int ata_ratelimit(void);
+extern unsigned int ata_busy_sleep(struct ata_port *ap,
+ unsigned long timeout_pat,
+ unsigned long timeout);
/*
* Default driver ops implementations
@@ -470,26 +526,29 @@
extern u8 ata_check_status(struct ata_port *ap);
extern u8 ata_altstatus(struct ata_port *ap);
extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf);
+extern int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes);
extern int ata_port_start (struct ata_port *ap);
extern void ata_port_stop (struct ata_port *ap);
extern void ata_host_stop (struct ata_host_set *host_set);
extern irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
extern void ata_qc_prep(struct ata_queued_cmd *qc);
-extern int ata_qc_issue_prot(struct ata_queued_cmd *qc);
+extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc);
extern void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf,
unsigned int buflen);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem);
extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
-extern void ata_dev_id_string(const u16 *id, unsigned char *s,
- unsigned int ofs, unsigned int len);
+extern void ata_id_string(const u16 *id, unsigned char *s,
+ unsigned int ofs, unsigned int len);
+extern void ata_id_c_string(const u16 *id, unsigned char *s,
+ unsigned int ofs, unsigned int len);
extern void ata_dev_config(struct ata_port *ap, unsigned int i);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
extern void ata_bmdma_start (struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
-extern void ata_qc_complete(struct ata_queued_cmd *qc);
+extern void __ata_qc_complete(struct ata_queued_cmd *qc);
extern void ata_eng_timeout(struct ata_port *ap);
extern void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
struct scsi_cmnd *cmd,
@@ -657,9 +716,9 @@
if (status & (ATA_BUSY | ATA_DRQ)) {
unsigned long l = ap->ioaddr.status_addr;
- printk(KERN_WARNING
- "ATA: abnormal status 0x%X on port 0x%lX\n",
- status, l);
+ if (ata_msg_warn(ap))
+ printk(KERN_WARNING "ATA: abnormal status 0x%X on port 0x%lX\n",
+ status, l);
}
return status;
@@ -701,6 +760,24 @@
ata_tf_init(qc->ap, &qc->tf, qc->dev->devno);
}
+/**
+ * ata_qc_complete - Complete an active ATA command
+ * @qc: Command to complete
+ * @err_mask: ATA Status register contents
+ *
+ * Indicate to the mid and upper layers that an ATA
+ * command has completed, with either an ok or not-ok status.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+static inline void ata_qc_complete(struct ata_queued_cmd *qc)
+{
+ if (unlikely(qc->flags & ATA_QCFLAG_EH_SCHEDULED))
+ return;
+
+ __ata_qc_complete(qc);
+}
/**
* ata_irq_on - Enable interrupts on a port.
@@ -751,7 +828,8 @@
status = ata_busy_wait(ap, bits, 1000);
if (status & bits)
- DPRINTK("abnormal status 0x%X\n", status);
+ if (ata_msg_err(ap))
+ printk(KERN_ERR "abnormal status 0x%X\n", status);
/* get controller status; clear intr, err bits */
if (ap->flags & ATA_FLAG_MMIO) {
@@ -769,8 +847,10 @@
post_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
}
- VPRINTK("irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
- host_stat, post_stat, status);
+ if (ata_msg_intr(ap))
+ printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n",
+ __FUNCTION__,
+ host_stat, post_stat, status);
return status;
}
@@ -807,7 +887,7 @@
static inline unsigned int ac_err_mask(u8 status)
{
if (status & ATA_BUSY)
- return AC_ERR_ATA_BUS;
+ return AC_ERR_HSM;
if (status & (ATA_ERR | ATA_DF))
return AC_ERR_DEV;
return 0;
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index fabd879..d160880 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -35,6 +35,9 @@
}
+extern void scsi_eh_finish_cmd(struct scsi_cmnd *scmd,
+ struct list_head *done_q);
+extern void scsi_eh_flush_done_q(struct list_head *done_q);
extern void scsi_report_bus_reset(struct Scsi_Host *, int);
extern void scsi_report_device_reset(struct Scsi_Host *, int, int);
extern int scsi_block_when_processing_errors(struct scsi_device *);