arch/tile: more /proc and /sys file support
This change introduces a few of the less controversial /proc and
/proc/sys interfaces for tile, along with sysfs attributes for
various things that were originally proposed as /proc/tile files.
It also adjusts the "hardwall" proc API.
Arnd Bergmann reviewed the initial arch/tile submission, which
included a complete set of all the /proc/tile and /proc/sys/tile
knobs that we had added in a somewhat ad hoc way during initial
development, and provided feedback on where most of them should go.
One knob turned out to be similar enough to the existing
/proc/sys/debug/exception-trace that it was re-implemented to use
that model instead.
Another knob was /proc/tile/grid, which reported the "grid" dimensions
of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested
looking at sysfs for that, so this change moves that information
to a pair of sysfs attributes (chip_width and chip_height) in the
/sys/devices/system/cpu directory. We also put the "chip_serial"
and "chip_revision" information from our old /proc/tile/board file
as attributes in /sys/devices/system/cpu.
Other information collected via hypervisor APIs is now placed in
/sys/hypervisor. We create a /sys/hypervisor/type file (holding the
constant string "tilera") to be parallel with the Xen use of
/sys/hypervisor/type holding "xen". We create three top-level files,
"version" (the hypervisor's own version), "config_version" (the
version of the configuration file), and "hvconfig" (the contents of
the configuration file). The remaining information from our old
/proc/tile/board and /proc/tile/switch files becomes an attribute
group appearing under /sys/hypervisor/board/.
Finally, after some feedback from Arnd Bergmann for the previous
version of this patch, the /proc/tile/hardwall file is split up into
two conceptual parts. First, a directory /proc/tile/hardwall/ which
contains one file per active hardwall, each file named after the
hardwall's ID and holding a cpulist that says which cpus are enclosed by
the hardwall. Second, a /proc/PID file "hardwall" that is either
empty (for non-hardwall-using processes) or contains the hardwall ID.
Finally, this change pushes the /proc/sys/tile/unaligned_fixup/
directory, with knobs controlling the kernel code for handling the
fixup of unaligned exceptions.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 635e1bf..3f7d63c 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -12,6 +12,7 @@
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
select GENERIC_IRQ_SHOW
+ select SYS_HYPERVISOR
# FIXME: investigate whether we need/want these options.
# select HAVE_IOREMAP_PROT
diff --git a/arch/tile/include/asm/hardwall.h b/arch/tile/include/asm/hardwall.h
index 0bed3ec7..2ac4228 100644
--- a/arch/tile/include/asm/hardwall.h
+++ b/arch/tile/include/asm/hardwall.h
@@ -40,6 +40,10 @@
#define HARDWALL_DEACTIVATE \
_IO(HARDWALL_IOCTL_BASE, _HARDWALL_DEACTIVATE)
+#define _HARDWALL_GET_ID 4
+#define HARDWALL_GET_ID \
+ _IO(HARDWALL_IOCTL_BASE, _HARDWALL_GET_ID)
+
#ifndef __KERNEL__
/* This is the canonical name expected by userspace. */
@@ -47,9 +51,14 @@
#else
-/* Hook for /proc/tile/hardwall. */
-struct seq_file;
-int proc_tile_hardwall_show(struct seq_file *sf, void *v);
+/* /proc hooks for hardwall. */
+struct proc_dir_entry;
+#ifdef CONFIG_HARDWALL
+void proc_tile_hardwall_init(struct proc_dir_entry *root);
+int proc_pid_hardwall(struct task_struct *task, char *buffer);
+#else
+static inline void proc_tile_hardwall_init(struct proc_dir_entry *root) {}
+#endif
#endif
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
index b4c8e8e..b4dbc05 100644
--- a/arch/tile/kernel/Makefile
+++ b/arch/tile/kernel/Makefile
@@ -5,7 +5,7 @@
extra-y := vmlinux.lds head_$(BITS).o
obj-y := backtrace.o entry.o init_task.o irq.o messaging.o \
pci-dma.o proc.o process.o ptrace.o reboot.o \
- setup.o signal.o single_step.o stack.o sys.o time.o traps.o \
+ setup.o signal.o single_step.o stack.o sys.o sysfs.o time.o traps.o \
intvec_$(BITS).o regs_$(BITS).o tile-desc_$(BITS).o
obj-$(CONFIG_HARDWALL) += hardwall.o
diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c
index 3bddef7..8c41891 100644
--- a/arch/tile/kernel/hardwall.c
+++ b/arch/tile/kernel/hardwall.c
@@ -40,16 +40,25 @@
struct hardwall_info {
struct list_head list; /* "rectangles" list */
struct list_head task_head; /* head of tasks in this hardwall */
+ struct cpumask cpumask; /* cpus in the rectangle */
int ulhc_x; /* upper left hand corner x coord */
int ulhc_y; /* upper left hand corner y coord */
int width; /* rectangle width */
int height; /* rectangle height */
+ int id; /* integer id for this hardwall */
int teardown_in_progress; /* are we tearing this one down? */
};
/* Currently allocated hardwall rectangles */
static LIST_HEAD(rectangles);
+/* /proc/tile/hardwall */
+static struct proc_dir_entry *hardwall_proc_dir;
+
+/* Functions to manage files in /proc/tile/hardwall. */
+static void hardwall_add_proc(struct hardwall_info *rect);
+static void hardwall_remove_proc(struct hardwall_info *rect);
+
/*
* Guard changes to the hardwall data structures.
* This could be finer grained (e.g. one lock for the list of hardwall
@@ -105,6 +114,8 @@
r->ulhc_y = cpu_y(ulhc);
r->width = cpu_x(lrhc) - r->ulhc_x + 1;
r->height = cpu_y(lrhc) - r->ulhc_y + 1;
+ cpumask_copy(&r->cpumask, mask);
+ r->id = ulhc; /* The ulhc cpu id can be the hardwall id. */
/* Width and height must be positive */
if (r->width <= 0 || r->height <= 0)
@@ -388,6 +399,9 @@
/* Set up appropriate hardwalling on all affected cpus. */
hardwall_setup(rect);
+ /* Create a /proc/tile/hardwall entry. */
+ hardwall_add_proc(rect);
+
return rect;
}
@@ -645,6 +659,9 @@
/* Restart switch and disable firewall. */
on_each_cpu_mask(&mask, restart_udn_switch, NULL, 1);
+ /* Remove the /proc/tile/hardwall entry. */
+ hardwall_remove_proc(rect);
+
/* Now free the rectangle from the list. */
spin_lock_irqsave(&hardwall_lock, flags);
BUG_ON(!list_empty(&rect->task_head));
@@ -654,35 +671,57 @@
}
-/*
- * Dump hardwall state via /proc; initialized in arch/tile/sys/proc.c.
- */
-int proc_tile_hardwall_show(struct seq_file *sf, void *v)
+static int hardwall_proc_show(struct seq_file *sf, void *v)
{
- struct hardwall_info *r;
+ struct hardwall_info *rect = sf->private;
+ char buf[256];
- if (udn_disabled) {
- seq_printf(sf, "%dx%d 0,0 pids:\n", smp_width, smp_height);
- return 0;
- }
-
- spin_lock_irq(&hardwall_lock);
- list_for_each_entry(r, &rectangles, list) {
- struct task_struct *p;
- seq_printf(sf, "%dx%d %d,%d pids:",
- r->width, r->height, r->ulhc_x, r->ulhc_y);
- list_for_each_entry(p, &r->task_head, thread.hardwall_list) {
- unsigned int cpu = cpumask_first(&p->cpus_allowed);
- unsigned int x = cpu % smp_width;
- unsigned int y = cpu / smp_width;
- seq_printf(sf, " %d@%d,%d", p->pid, x, y);
- }
- seq_printf(sf, "\n");
- }
- spin_unlock_irq(&hardwall_lock);
+ int rc = cpulist_scnprintf(buf, sizeof(buf), &rect->cpumask);
+ buf[rc++] = '\n';
+ seq_write(sf, buf, rc);
return 0;
}
+static int hardwall_proc_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, hardwall_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations hardwall_proc_fops = {
+ .open = hardwall_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void hardwall_add_proc(struct hardwall_info *rect)
+{
+ char buf[64];
+ snprintf(buf, sizeof(buf), "%d", rect->id);
+ proc_create_data(buf, 0444, hardwall_proc_dir,
+ &hardwall_proc_fops, rect);
+}
+
+static void hardwall_remove_proc(struct hardwall_info *rect)
+{
+ char buf[64];
+ snprintf(buf, sizeof(buf), "%d", rect->id);
+ remove_proc_entry(buf, hardwall_proc_dir);
+}
+
+int proc_pid_hardwall(struct task_struct *task, char *buffer)
+{
+ struct hardwall_info *rect = task->thread.hardwall;
+ return rect ? sprintf(buffer, "%d\n", rect->id) : 0;
+}
+
+void proc_tile_hardwall_init(struct proc_dir_entry *root)
+{
+ if (!udn_disabled)
+ hardwall_proc_dir = proc_mkdir("hardwall", root);
+}
+
/*
* Character device support via ioctl/close.
@@ -716,6 +755,9 @@
return -EINVAL;
return hardwall_deactivate(current);
+ case _HARDWALL_GET_ID:
+ return rect ? rect->id : -EINVAL;
+
default:
return -EINVAL;
}
diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c
index 2e02c41..62d8208 100644
--- a/arch/tile/kernel/proc.c
+++ b/arch/tile/kernel/proc.c
@@ -27,6 +27,7 @@
#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/homecache.h>
+#include <asm/hardwall.h>
#include <arch/chip.h>
@@ -88,3 +89,75 @@
.stop = c_stop,
.show = show_cpuinfo,
};
+
+/*
+ * Support /proc/tile directory
+ */
+
+static int __init proc_tile_init(void)
+{
+ struct proc_dir_entry *root = proc_mkdir("tile", NULL);
+ if (root == NULL)
+ return 0;
+
+ proc_tile_hardwall_init(root);
+
+ return 0;
+}
+
+arch_initcall(proc_tile_init);
+
+/*
+ * Support /proc/sys/tile directory
+ */
+
+#ifndef __tilegx__ /* FIXME: GX: no support for unaligned access yet */
+static ctl_table unaligned_subtable[] = {
+ {
+ .procname = "enabled",
+ .data = &unaligned_fixup,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec
+ },
+ {
+ .procname = "printk",
+ .data = &unaligned_printk,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec
+ },
+ {
+ .procname = "count",
+ .data = &unaligned_fixup_count,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec
+ },
+ {}
+};
+
+static ctl_table unaligned_table[] = {
+ {
+ .procname = "unaligned_fixup",
+ .mode = 0555,
+ .child = unaligned_subtable
+ },
+ {}
+};
+#endif
+
+static struct ctl_path tile_path[] = {
+ { .procname = "tile" },
+ { }
+};
+
+static int __init proc_sys_tile_init(void)
+{
+#ifndef __tilegx__ /* FIXME: GX: no support for unaligned access yet */
+ register_sysctl_paths(tile_path, unaligned_table);
+#endif
+ return 0;
+}
+
+arch_initcall(proc_sys_tile_init);
diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c
new file mode 100644
index 0000000..b671a86
--- /dev/null
+++ b/arch/tile/kernel/sysfs.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * /sys entry support.
+ */
+
+#include <linux/sysdev.h>
+#include <linux/cpu.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <hv/hypervisor.h>
+
+/* Return a string queried from the hypervisor, truncated to page size. */
+static ssize_t get_hv_confstr(char *page, int query)
+{
+ ssize_t n = hv_confstr(query, (unsigned long)page, PAGE_SIZE - 1);
+ n = n < 0 ? 0 : min(n, (ssize_t)PAGE_SIZE - 1) - 1;
+ if (n)
+ page[n++] = '\n';
+ page[n] = '\0';
+ return n;
+}
+
+static ssize_t chip_width_show(struct sysdev_class *dev,
+ struct sysdev_class_attribute *attr,
+ char *page)
+{
+ return sprintf(page, "%u\n", smp_width);
+}
+static SYSDEV_CLASS_ATTR(chip_width, 0444, chip_width_show, NULL);
+
+static ssize_t chip_height_show(struct sysdev_class *dev,
+ struct sysdev_class_attribute *attr,
+ char *page)
+{
+ return sprintf(page, "%u\n", smp_height);
+}
+static SYSDEV_CLASS_ATTR(chip_height, 0444, chip_height_show, NULL);
+
+static ssize_t chip_serial_show(struct sysdev_class *dev,
+ struct sysdev_class_attribute *attr,
+ char *page)
+{
+ return get_hv_confstr(page, HV_CONFSTR_CHIP_SERIAL_NUM);
+}
+static SYSDEV_CLASS_ATTR(chip_serial, 0444, chip_serial_show, NULL);
+
+static ssize_t chip_revision_show(struct sysdev_class *dev,
+ struct sysdev_class_attribute *attr,
+ char *page)
+{
+ return get_hv_confstr(page, HV_CONFSTR_CHIP_REV);
+}
+static SYSDEV_CLASS_ATTR(chip_revision, 0444, chip_revision_show, NULL);
+
+
+static ssize_t type_show(struct sysdev_class *dev,
+ struct sysdev_class_attribute *attr,
+ char *page)
+{
+ return sprintf(page, "tilera\n");
+}
+static SYSDEV_CLASS_ATTR(type, 0444, type_show, NULL);
+
+#define HV_CONF_ATTR(name, conf) \
+ static ssize_t name ## _show(struct sysdev_class *dev, \
+ struct sysdev_class_attribute *attr, \
+ char *page) \
+ { \
+ return get_hv_confstr(page, conf); \
+ } \
+ static SYSDEV_CLASS_ATTR(name, 0444, name ## _show, NULL);
+
+HV_CONF_ATTR(version, HV_CONFSTR_HV_SW_VER)
+HV_CONF_ATTR(config_version, HV_CONFSTR_HV_CONFIG_VER)
+
+HV_CONF_ATTR(board_part, HV_CONFSTR_BOARD_PART_NUM)
+HV_CONF_ATTR(board_serial, HV_CONFSTR_BOARD_SERIAL_NUM)
+HV_CONF_ATTR(board_revision, HV_CONFSTR_BOARD_REV)
+HV_CONF_ATTR(board_description, HV_CONFSTR_BOARD_DESC)
+HV_CONF_ATTR(mezz_part, HV_CONFSTR_MEZZ_PART_NUM)
+HV_CONF_ATTR(mezz_serial, HV_CONFSTR_MEZZ_SERIAL_NUM)
+HV_CONF_ATTR(mezz_revision, HV_CONFSTR_MEZZ_REV)
+HV_CONF_ATTR(mezz_description, HV_CONFSTR_MEZZ_DESC)
+HV_CONF_ATTR(switch_control, HV_CONFSTR_SWITCH_CONTROL)
+
+static struct attribute *board_attrs[] = {
+ &attr_board_part.attr,
+ &attr_board_serial.attr,
+ &attr_board_revision.attr,
+ &attr_board_description.attr,
+ &attr_mezz_part.attr,
+ &attr_mezz_serial.attr,
+ &attr_mezz_revision.attr,
+ &attr_mezz_description.attr,
+ &attr_switch_control.attr,
+ NULL
+};
+
+static struct attribute_group board_attr_group = {
+ .name = "board",
+ .attrs = board_attrs,
+};
+
+
+static struct bin_attribute hvconfig_bin;
+
+static ssize_t
+hvconfig_bin_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ static size_t size;
+
+ /* Lazily learn the true size (minus the trailing NUL). */
+ if (size == 0)
+ size = hv_confstr(HV_CONFSTR_HV_CONFIG, 0, 0) - 1;
+
+ /* Check and adjust input parameters. */
+ if (off > size)
+ return -EINVAL;
+ if (count > size - off)
+ count = size - off;
+
+ if (count) {
+ /* Get a copy of the hvc and copy out the relevant portion. */
+ char *hvc;
+
+ size = off + count;
+ hvc = kmalloc(size, GFP_KERNEL);
+ if (hvc == NULL)
+ return -ENOMEM;
+ hv_confstr(HV_CONFSTR_HV_CONFIG, (unsigned long)hvc, size);
+ memcpy(buf, hvc + off, count);
+ kfree(hvc);
+ }
+
+ return count;
+}
+
+static int __init create_sysfs_entries(void)
+{
+ struct sysdev_class *cls = &cpu_sysdev_class;
+ int err = 0;
+
+#define create_cpu_attr(name) \
+ if (!err) \
+ err = sysfs_create_file(&cls->kset.kobj, &attr_##name.attr);
+ create_cpu_attr(chip_width);
+ create_cpu_attr(chip_height);
+ create_cpu_attr(chip_serial);
+ create_cpu_attr(chip_revision);
+
+#define create_hv_attr(name) \
+ if (!err) \
+ err = sysfs_create_file(hypervisor_kobj, &attr_##name.attr);
+ create_hv_attr(type);
+ create_hv_attr(version);
+ create_hv_attr(config_version);
+
+ if (!err)
+ err = sysfs_create_group(hypervisor_kobj, &board_attr_group);
+
+ if (!err) {
+ sysfs_bin_attr_init(&hvconfig_bin);
+ hvconfig_bin.attr.name = "hvconfig";
+ hvconfig_bin.attr.mode = S_IRUGO;
+ hvconfig_bin.read = hvconfig_bin_read;
+ hvconfig_bin.size = PAGE_SIZE;
+ err = sysfs_create_bin_file(hypervisor_kobj, &hvconfig_bin);
+ }
+
+ return err;
+}
+subsys_initcall(create_sysfs_entries);